6360 files changed, 437512 insertions, 183731 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 6682b2a53e34..31220f512b16 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -41,6 +41,44 @@ config HOTPLUG_SMT
 config SMT_NUM_THREADS_DYNAMIC
 	bool
 
+config ARCH_SUPPORTS_SCHED_SMT
+	bool
+
+config ARCH_SUPPORTS_SCHED_CLUSTER
+	bool
+
+config ARCH_SUPPORTS_SCHED_MC
+	bool
+
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_SMT
+	default y
+	help
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
+
+config SCHED_CLUSTER
+	bool "Cluster scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_CLUSTER
+	default y
+	help
+	  Cluster scheduler support improves the CPU scheduler's decision
+	  making when dealing with machines that have clusters of CPUs.
+	  Cluster usually means a couple of CPUs which are placed closely
+	  by sharing mid-level caches, last-level cache tags or internal
+	  busses.
+
+config SCHED_MC
+	bool "Multi-Core Cache (MC) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_MC
+	default y
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
 # Selected by HOTPLUG_CORE_SYNC_DEAD or HOTPLUG_CORE_SYNC_FULL
 config HOTPLUG_CORE_SYNC
 	bool
@@ -64,8 +102,17 @@ config HOTPLUG_PARALLEL
 	bool
 	select HOTPLUG_SPLIT_STARTUP
 
+config GENERIC_IRQ_ENTRY
+	bool
+
+config GENERIC_SYSCALL
+	bool
+	depends on GENERIC_IRQ_ENTRY
+
 config GENERIC_ENTRY
 	bool
+	select GENERIC_IRQ_ENTRY
+	select GENERIC_SYSCALL
 
 config KPROBES
 	bool "Kprobes"
@@ -185,17 +232,14 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
 config ARCH_USE_BUILTIN_BSWAP
 	bool
 	help
-	  Modern versions of GCC (since 4.4) have builtin functions
-	  for handling byte-swapping. Using these, instead of the old
-	  inline assembler that the architecture code provides in the
-	  __arch_bswapXX() macros, allows the compiler to see what's
-	  happening and offers more opportunity for optimisation. In
-	  particular, the compiler will be able to combine the byteswap
-	  with a nearby load or store and use load-and-swap or
-	  store-and-swap instructions if the architecture has them. It
-	  should almost *never* result in code which is worse than the
-	  hand-coded assembler in <asm/swab.h>.  But just in case it
-	  does, the use of the builtins is optional.
+	  GCC and Clang have builtin functions for handling byte-swapping.
+	  Using these allows the compiler to see what's happening and
+	  offers more opportunity for optimisation. In particular, the
+	  compiler will be able to combine the byteswap with a nearby load
+	  or store and use load-and-swap or store-and-swap instructions if
+	  the architecture has them. It should almost *never* result in code
+	  which is worse than the hand-coded assembler in <asm/swab.h>.
+	  But just in case it does, the use of the builtins is optional.
 
 	  Any architecture with load-and-swap or store-and-swap
 	  instructions should set this. And it shouldn't hurt to set it
@@ -435,6 +479,13 @@ config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	  It uses the same command line parameters, and sysctl interface,
 	  as the generic hardlockup detectors.
 
+config UNWIND_USER
+	bool
+
+config HAVE_UNWIND_USER_FP
+	bool
+	select UNWIND_USER
+
 config HAVE_PERF_REGS
 	bool
 	help
@@ -630,11 +681,11 @@ config SECCOMP_CACHE_DEBUG
 
 	  If unsure, say N.
 
-config HAVE_ARCH_STACKLEAK
+config HAVE_ARCH_KSTACK_ERASE
 	bool
 	help
 	  An architecture should select this if it has the code which
-	  fills the used part of the kernel stack with the STACKLEAK_POISON
+	  fills the used part of the kernel stack with the KSTACK_ERASE_POISON
 	  value before returning from system calls.
 
 config HAVE_STACKPROTECTOR
@@ -851,22 +902,33 @@ config PROPELLER_CLANG
 
 	  If unsure, say N.
 
-config ARCH_SUPPORTS_CFI_CLANG
+config ARCH_SUPPORTS_CFI
 	bool
 	help
-	  An architecture should select this option if it can support Clang's
-	  Control-Flow Integrity (CFI) checking.
+	  An architecture should select this option if it can support Kernel
+	  Control-Flow Integrity (CFI) checking (-fsanitize=kcfi).
 
 config ARCH_USES_CFI_TRAPS
 	bool
+	help
+	  An architecture should select this option if it requires the
+	  .kcfi_traps section for KCFI trap handling.
 
-config CFI_CLANG
-	bool "Use Clang's Control Flow Integrity (CFI)"
-	depends on ARCH_SUPPORTS_CFI_CLANG
+config ARCH_USES_CFI_GENERIC_LLVM_PASS
+	bool
+	help
+	  An architecture should select this option if it uses the generic
+	  KCFIPass in LLVM to expand kCFI bundles instead of architecture-specific
+	  lowering.
+
+config CFI
+	bool "Use Kernel Control Flow Integrity (kCFI)"
+	default CFI_CLANG
+	depends on ARCH_SUPPORTS_CFI
 	depends on $(cc-option,-fsanitize=kcfi)
 	help
-	  This option enables Clang's forward-edge Control Flow Integrity
-	  (CFI) checking, where the compiler injects a runtime check to each
+	  This option enables forward-edge Control Flow Integrity (CFI)
+	  checking, where the compiler injects a runtime check to each
 	  indirect function call to ensure the target is a valid function with
 	  the correct static type. This restricts possible call targets and
 	  makes it more difficult for an attacker to exploit bugs that allow
@@ -875,10 +937,16 @@ config CFI_CLANG
 
 	    https://clang.llvm.org/docs/ControlFlowIntegrity.html
 
+config CFI_CLANG
+	bool
+	transitional
+	help
+	  Transitional config for CFI_CLANG to CFI migration.
+
 config CFI_ICALL_NORMALIZE_INTEGERS
 	bool "Normalize CFI tags for integers"
-	depends on CFI_CLANG
-	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG
+	depends on CFI
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
 	help
 	  This option normalizes the CFI tags for integer types so that all
 	  integer types of the same size and signedness receive the same CFI
@@ -891,7 +959,7 @@ config CFI_ICALL_NORMALIZE_INTEGERS
 
 	  This option is necessary for using CFI with Rust. If unsure, say N.
 
-config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG
+config HAVE_CFI_ICALL_NORMALIZE_INTEGERS
 	def_bool y
 	depends on $(cc-option,-fsanitize=kcfi -fsanitize-cfi-icall-experimental-normalize-integers)
 	# With GCOV/KASAN we need this fix: https://github.com/llvm/llvm-project/pull/104826
@@ -899,15 +967,16 @@ config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG
 
 config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC
 	def_bool y
-	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
 	depends on RUSTC_VERSION >= 107900
+	depends on ARM64 || X86_64
 	# With GCOV/KASAN we need this fix: https://github.com/rust-lang/rust/pull/129373
 	depends on (RUSTC_LLVM_VERSION >= 190103 && RUSTC_VERSION >= 108200) || \
 		(!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS)
 
 config CFI_PERMISSIVE
 	bool "Use CFI in permissive mode"
-	depends on CFI_CLANG
+	depends on CFI
 	help
 	  When selected, Control Flow Integrity (CFI) violations result in a
 	  warning instead of a kernel panic. This option should only be used
@@ -1459,7 +1528,6 @@ config RANDOMIZE_KSTACK_OFFSET
 	bool "Support for randomizing kernel stack offset on syscall entry" if EXPERT
 	default y
 	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
-	depends on INIT_STACK_NONE || !CC_IS_CLANG || CLANG_VERSION >= 140000
 	help
 	  The kernel stack offset can be randomized (after pt_regs) by
 	  roughly 5 bits of entropy, frustrating memory corruption
@@ -1518,6 +1586,14 @@ config STRICT_MODULE_RWX
 config ARCH_HAS_PHYS_TO_DMA
 	bool
 
+config ARCH_HAS_CPU_RESCTRL
+	bool
+	help
+	  An architecture selects this option to indicate that the necessary
+	  hooks are provided to support the common memory system usage
+	  monitoring and control interfaces provided by the 'resctrl'
+	  filesystem (see RESCTRL_FS).
+
 config HAVE_ARCH_COMPILER_H
 	bool
 	help
@@ -1526,6 +1602,14 @@ config HAVE_ARCH_COMPILER_H
 	  linux/compiler-*.h in order to override macro definitions that those
 	  headers generally provide.
 
+config HAVE_ARCH_LIBGCC_H
+	bool
+	help
+	  An architecture can select this if it provides an
+	  asm/libgcc.h header that should be included after
+	  linux/libgcc.h in order to override macro definitions that
+	  header generally provides.
+
 config HAVE_ARCH_PREL32_RELOCATIONS
 	bool
 	help
@@ -1576,6 +1660,10 @@ config HAVE_SPARSE_SYSCALL_NR
 	  entries at 4000, 5000 and 6000 locations. This option turns on syscall
 	  related optimizations for a given architecture.
 
+config ARCH_HAS_VDSO_ARCH_DATA
+	depends on HAVE_GENERIC_VDSO
+	bool
+
 config ARCH_HAS_VDSO_TIME_DATA
 	bool
 
@@ -1687,6 +1775,17 @@ config ARCH_HAS_KERNEL_FPU_SUPPORT
 	  Architectures that select this option can run floating-point code in
 	  the kernel, as described in Documentation/core-api/floating-point.rst.
 
+config ARCH_VMLINUX_NEEDS_RELOCS
+	bool
+	help
+	  Whether the architecture needs vmlinux to be built with static
+	  relocations preserved. This is used by some architectures to
+	  construct bespoke relocation tables for KASLR.
+
+# Select if architecture uses the common generic TIF bits
+config HAVE_GENERIC_TIF_BITS
+       bool
+
 source "kernel/gcov/Kconfig"
 
 source "scripts/gcc-plugins/Kconfig"
@@ -1736,4 +1835,7 @@ config ARCH_WANTS_PRE_LINK_VMLINUX
 	  An architecture can select this if it provides arch/<arch>/tools/Makefile
 	  with .arch.vmlinux.o target to be linked into vmlinux.
 
+config ARCH_HAS_CPU_ATTACK_VECTORS
+	bool
+
 endmenu
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 109a4cddcd13..80367f2cf821 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -7,6 +7,7 @@ config ALPHA
 	select ARCH_HAS_DMA_OPS if PCI
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
+	select ARCH_MODULE_NEEDS_WEAK_PER_CPU if SMP
 	select ARCH_NO_PREEMPT
 	select ARCH_NO_SG_CHAIN
 	select ARCH_USE_CMPXCHG_LOCKREF
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 3e33621922c3..76e4343c090f 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -328,7 +328,7 @@ static inline unsigned long ffz_b(unsigned long x)
 	return sum;
 }
 
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __attribute_const__ ffz(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -348,7 +348,7 @@ static inline unsigned long ffz(unsigned long word)
 /*
  * __ffs = Find First set bit in word.  Undefined if no set bit exists.
  */
-static inline unsigned long __ffs(unsigned long word)
+static inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -373,7 +373,7 @@ static inline unsigned long __ffs(unsigned long word)
  * differs in spirit from the above __ffs.
  */
 
-static inline int ffs(int word)
+static inline __attribute_const__ int ffs(int word)
 {
 	int result = __ffs(word) + 1;
 	return word ? result : 0;
@@ -383,14 +383,14 @@ static inline int ffs(int word)
  * fls: find last bit set.
  */
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
-static inline int fls64(unsigned long word)
+static inline __attribute_const__ int fls64(unsigned long word)
 {
 	return 64 - __kernel_ctlz(word);
 }
 #else
 extern const unsigned char __flsm1_tab[256];
 
-static inline int fls64(unsigned long x)
+static inline __attribute_const__ int fls64(unsigned long x)
 {
 	unsigned long t, a, r;
 
@@ -403,12 +403,12 @@ static inline int fls64(unsigned long x)
 }
 #endif
 
-static inline unsigned long __fls(unsigned long x)
+static inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	return fls64(x) - 1;
 }
 
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	return fls64(x);
 }
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
index 4d7c46f50382..50c82187e60e 100644
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@@ -74,7 +74,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+#define elf_check_arch(x) (((x)->e_machine == EM_ALPHA) && !((x)->e_flags & EF_ALPHA_32BIT))
 
 /*
  * These are used to set parameters in the core dumps.
@@ -137,10 +137,6 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
 extern int alpha_l2_cacheshape;
diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h
index 64b42d9591fc..5a6239e65097 100644
--- a/arch/alpha/include/asm/floppy.h
+++ b/arch/alpha/include/asm/floppy.h
@@ -90,25 +90,6 @@ static int FDC2 = -1;
 #define N_FDC 2
 #define N_DRIVE 8
 
-/*
- * Most Alphas have no problems with floppy DMA crossing 64k borders,
- * except for certain ones, like XL and RUFFIAN.
- *
- * However, the test is simple and fast, and this *is* floppy, after all,
- * so we do it for all platforms, just to make sure.
- *
- * This is advantageous in other circumstances as well, as in moving
- * about the PCI DMA windows and forcing the floppy to start doing
- * scatter-gather when it never had before, and there *is* a problem
- * on that platform... ;-}
- */
-
-static inline unsigned long CROSS_64KB(void *a, unsigned long s)
-{
-	unsigned long p = (unsigned long)a;
-	return ((p + s - 1) ^ p) & ~0xffffUL;
-}
-
 #define EXTRA_FLOPPY_PARAMS
 
 #endif /* __ASM_ALPHA_FLOPPY_H */
diff --git a/arch/alpha/include/asm/hwrpb.h b/arch/alpha/include/asm/hwrpb.h
index fc76f36265ad..db831cf8de10 100644
--- a/arch/alpha/include/asm/hwrpb.h
+++ b/arch/alpha/include/asm/hwrpb.h
@@ -135,7 +135,7 @@ struct crb_struct {
 	/* virtual->physical map */
 	unsigned long map_entries;
 	unsigned long map_pages;
-	struct vf_map_struct map[1];
+	struct vf_map_struct map[];
 };
 
 struct memclust_struct {
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 65fe1e54c6da..fa3e4c246cda 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -10,10 +10,6 @@
 #include <asm/machvec.h>
 #include <asm/hwrpb.h>
 
-/* The generic header contains only prototypes.  Including it ensures that
-   the implementation we have here matches that interface.  */
-#include <asm-generic/iomap.h>
-
 /*
  * Virtual -> physical identity mapping starts at this offset
  */
@@ -276,13 +272,24 @@ extern void		__raw_writeq(u64 b, volatile void __iomem *addr);
 #define __raw_writel __raw_writel
 #define __raw_writeq __raw_writeq
 
-/*
- * Mapping from port numbers to __iomem space is pretty easy.
- */
+extern unsigned int ioread8(const void __iomem *);
+extern unsigned int ioread16(const void __iomem *);
+extern unsigned int ioread32(const void __iomem *);
+extern u64 ioread64(const void __iomem *);
+
+extern void iowrite8(u8, void __iomem *);
+extern void iowrite16(u16, void __iomem *);
+extern void iowrite32(u32, void __iomem *);
+extern void iowrite64(u64, void __iomem *);
+
+extern void ioread8_rep(const void __iomem *port, void *buf, unsigned long count);
+extern void ioread16_rep(const void __iomem *port, void *buf, unsigned long count);
+extern void ioread32_rep(const void __iomem *port, void *buf, unsigned long count);
+
+extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
 
-/* These two have to be extern inline because of the extern prototype from
-   <asm-generic/iomap.h>.  It is not legal to mix "extern" and "static" for
-   the same declaration.  */
 extern inline void __iomem *ioport_map(unsigned long port, unsigned int size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
@@ -629,10 +636,6 @@ extern void outsl (unsigned long port, const void *src, unsigned long count);
 #define RTC_PORT(x)	(0x70 + (x))
 #define RTC_ALWAYS_BCD	0
 
-/*
- * These get provided from <asm-generic/iomap.h> since alpha does not
- * select GENERIC_IOMAP.
- */
 #define ioread64 ioread64
 #define iowrite64 iowrite64
 #define ioread8_rep ioread8_rep
diff --git a/arch/alpha/include/asm/param.h b/arch/alpha/include/asm/param.h
deleted file mode 100644
index cfe947ce9461..000000000000
--- a/arch/alpha/include/asm/param.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_ALPHA_PARAM_H
-#define _ASM_ALPHA_PARAM_H
-
-#include <uapi/asm/param.h>
-
-# undef HZ
-# define HZ		CONFIG_HZ
-# define USER_HZ	1024
-# define CLOCKS_PER_SEC	USER_HZ	/* frequency at which times() counts */
-
-#endif /* _ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 6923249f2d49..4383d66341dc 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -9,10 +9,9 @@
  * way above 4G.
  *
  * Always use weak definitions for percpu variables in modules.
+ * Therefore, we have enabled CONFIG_ARCH_MODULE_NEEDS_WEAK_PER_CPU
+ * in the Kconfig.
  */
-#if defined(MODULE) && defined(CONFIG_SMP)
-#define ARCH_NEEDS_WEAK_PER_CPU
-#endif
 
 #include <asm-generic/percpu.h>
 
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 635f0a5f5bbd..90e7a9539102 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -107,7 +107,7 @@ struct vm_area_struct;
 
 #define _PAGE_NORMAL(x) __pgprot(_PAGE_VALID | __ACCESS_BITS | (x))
 
-#define _PAGE_P(x) _PAGE_NORMAL((x) | (((x) & _PAGE_FOW)?0:_PAGE_FOW))
+#define _PAGE_P(x) _PAGE_NORMAL((x) | _PAGE_FOW)
 #define _PAGE_S(x) _PAGE_NORMAL(x)
 
 /*
@@ -126,34 +126,11 @@ struct vm_area_struct;
 #define pgprot_noncached(prot)	(prot)
 
 /*
- * BAD_PAGETABLE is used when we need a bogus page-table, while
- * BAD_PAGE is used for a bogus page.
- *
  * ZERO_PAGE is a global shared page that is always zero:  used
  * for zero-mapped memory areas etc..
  */
-extern pte_t __bad_page(void);
-extern pmd_t * __bad_pagetable(void);
-
-extern unsigned long __zero_page(void);
-
-#define BAD_PAGETABLE	__bad_pagetable()
-#define BAD_PAGE	__bad_page()
 #define ZERO_PAGE(vaddr)	(virt_to_page(ZERO_PGE))
 
-/* number of bits that fit into a memory pointer */
-#define BITS_PER_PTR			(8*sizeof(unsigned long))
-
-/* to align the pointer to a pointer address */
-#define PTR_MASK			(~(sizeof(void*)-1))
-
-/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
-#define SIZEOF_PTR_LOG2			3
-
-/* to find an entry in a page-table */
-#define PAGE_PTR(address)		\
-  ((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
-
 /*
  * On certain platforms whose physical address space can overlap KSEG,
  * namely EV6 and above, we must re-twiddle the physaddr to restore the
@@ -192,13 +169,6 @@ extern unsigned long __zero_page(void);
 #define pte_pfn(pte)		(pte_val(pte) >> PFN_PTE_SHIFT)
 
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
-#define mk_pte(page, pgprot)						\
-({									\
-	pte_t pte;							\
-									\
-	pte_val(pte) = (page_to_pfn(page) << 32) | pgprot_val(pgprot);	\
-	pte;								\
-})
 
 extern inline pte_t pfn_pte(unsigned long physpfn, pgprot_t pgprot)
 { pte_t pte; pte_val(pte) = (PHYS_TWIDDLE(physpfn) << 32) | pgprot_val(pgprot); return pte; }
@@ -334,7 +304,7 @@ extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -360,7 +330,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 
 extern void paging_init(void);
 
-/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+/* We have our own get_unmapped_area */
 #define HAVE_ARCH_UNMAPPED_AREA
 
 #endif /* _ALPHA_PGTABLE_H */
diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h
index 55bb1c09fd39..5dce5518a211 100644
--- a/arch/alpha/include/asm/processor.h
+++ b/arch/alpha/include/asm/processor.h
@@ -8,23 +8,19 @@
 #ifndef __ASM_ALPHA_PROCESSOR_H
 #define __ASM_ALPHA_PROCESSOR_H
 
-#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
-
 /*
  * We have a 42-bit user address space: 4TB user VM...
  */
 #define TASK_SIZE (0x40000000000UL)
 
-#define STACK_TOP \
-  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+#define STACK_TOP (0x00120000000UL)
 
 #define STACK_TOP_MAX	0x00120000000UL
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE \
-  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 2)
 
 /* This is dead.  Everything has been moved to thread_info.  */
 struct thread_struct { };
diff --git a/arch/alpha/include/uapi/asm/param.h b/arch/alpha/include/uapi/asm/param.h
index 49c7119934e2..e4e410f9bf85 100644
--- a/arch/alpha/include/uapi/asm/param.h
+++ b/arch/alpha/include/uapi/asm/param.h
@@ -2,14 +2,9 @@
 #ifndef _UAPI_ASM_ALPHA_PARAM_H
 #define _UAPI_ASM_ALPHA_PARAM_H
 
-#define HZ		1024
-
+#define __USER_HZ	1024
 #define EXEC_PAGESIZE	8192
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
 #endif /* _UAPI_ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/uapi/asm/ptrace.h b/arch/alpha/include/uapi/asm/ptrace.h
index 5ca45934fcbb..72ed913a910f 100644
--- a/arch/alpha/include/uapi/asm/ptrace.h
+++ b/arch/alpha/include/uapi/asm/ptrace.h
@@ -42,6 +42,8 @@ struct pt_regs {
 	unsigned long trap_a0;
 	unsigned long trap_a1;
 	unsigned long trap_a2;
+/* This makes the stack 16-byte aligned as GCC expects */
+	unsigned long __pad0;
 /* These are saved by PAL-code: */
 	unsigned long ps;
 	unsigned long pc;
diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h
index 302507bf9b5d..5ef57f88df6b 100644
--- a/arch/alpha/include/uapi/asm/socket.h
+++ b/arch/alpha/include/uapi/asm/socket.h
@@ -148,6 +148,13 @@
 
 #define SCM_TS_OPT_ID		81
 
+#define SO_RCVPRIORITY		82
+
+#define SO_PASSRIGHTS		83
+
+#define SO_INQ			84
+#define SCM_INQ			SO_INQ
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index b6c862dff1f6..187cd8df2faf 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the linux kernel.
 #
 
-extra-y		:= vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 asflags-y	:= $(KBUILD_CFLAGS)
 ccflags-y	:= -Wno-sign-compare
 
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
index 4cfeae42c79a..1ebb05890499 100644
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -4,6 +4,7 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/types.h>
 #include <linux/stddef.h>
@@ -19,9 +20,13 @@ static void __used foo(void)
 	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
 	BLANK();
 
+	DEFINE(SP_OFF, offsetof(struct pt_regs, ps));
 	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
 	BLANK();
 
+	DEFINE(SWITCH_STACK_SIZE, sizeof(struct switch_stack));
+	BLANK();
+
 	DEFINE(HAE_CACHE, offsetof(struct alpha_machine_vector, hae_cache));
 	DEFINE(HAE_REG, offsetof(struct alpha_machine_vector, hae_register));
 }
diff --git a/arch/alpha/kernel/core_cia.c b/arch/alpha/kernel/core_cia.c
index ca3d9c732b61..6e577228e175 100644
--- a/arch/alpha/kernel/core_cia.c
+++ b/arch/alpha/kernel/core_cia.c
@@ -331,10 +331,7 @@ cia_prepare_tbia_workaround(int window)
 	long i;
 
 	/* Use minimal 1K map. */
-	ppte = memblock_alloc(CIA_BROKEN_TBIA_SIZE, 32768);
-	if (!ppte)
-		panic("%s: Failed to allocate %u bytes align=0x%x\n",
-		      __func__, CIA_BROKEN_TBIA_SIZE, 32768);
+	ppte = memblock_alloc_or_panic(CIA_BROKEN_TBIA_SIZE, 32768);
 	pte = (virt_to_phys(ppte) >> (PAGE_SHIFT - 1)) | 1;
 
 	for (i = 0; i < CIA_BROKEN_TBIA_SIZE / sizeof(unsigned long); ++i)
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index b22248044bf0..d38f4d6759e4 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -17,6 +17,7 @@
 #include <linux/vmalloc.h>
 #include <linux/mc146818rtc.h>
 #include <linux/rtc.h>
+#include <linux/string.h>
 #include <linux/module.h>
 #include <linux/memblock.h>
 
@@ -79,13 +80,12 @@ mk_resource_name(int pe, int port, char *str)
 {
 	char tmp[80];
 	char *name;
-	
-	sprintf(tmp, "PCI %s PE %d PORT %d", str, pe, port);
-	name = memblock_alloc(strlen(tmp) + 1, SMP_CACHE_BYTES);
-	if (!name)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      strlen(tmp) + 1);
-	strcpy(name, tmp);
+	size_t sz;
+
+	sz = scnprintf(tmp, sizeof(tmp), "PCI %s PE %d PORT %d", str, pe, port);
+	sz += 1; /* NUL terminator */
+	name = memblock_alloc_or_panic(sz, SMP_CACHE_BYTES);
+	strscpy(name, tmp, sz);
 
 	return name;
 }
@@ -119,10 +119,7 @@ alloc_io7(unsigned int pe)
 		return NULL;
 	}
 
-	io7 = memblock_alloc(sizeof(*io7), SMP_CACHE_BYTES);
-	if (!io7)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*io7));
+	io7 = memblock_alloc_or_panic(sizeof(*io7), SMP_CACHE_BYTES);
 	io7->pe = pe;
 	raw_spin_lock_init(&io7->irq_lock);
 
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index dd26062d75b3..f4d41b4538c2 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -15,10 +15,6 @@
 	.set noat
 	.cfi_sections	.debug_frame
 
-/* Stack offsets.  */
-#define SP_OFF			184
-#define SWITCH_STACK_SIZE	64
-
 .macro	CFI_START_OSF_FRAME	func
 	.align	4
 	.globl	\func
@@ -198,8 +194,8 @@ CFI_END_OSF_FRAME entArith
 CFI_START_OSF_FRAME entMM
 	SAVE_ALL
 /* save $9 - $15 so the inline exception code can manipulate them.  */
-	subq	$sp, 56, $sp
-	.cfi_adjust_cfa_offset	56
+	subq	$sp, 64, $sp
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -214,7 +210,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 /* handle the fault */
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
@@ -227,7 +223,7 @@ CFI_START_OSF_FRAME entMM
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	addq	$sp, 56, $sp
+	addq	$sp, 64, $sp
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -235,7 +231,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 /* finish up the syscall as normal.  */
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entMM
@@ -382,8 +378,8 @@ entUnaUser:
 	.cfi_restore	$0
 	.cfi_adjust_cfa_offset	-256
 	SAVE_ALL		/* setup normal kernel stack */
-	lda	$sp, -56($sp)
-	.cfi_adjust_cfa_offset	56
+	lda	$sp, -64($sp)
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -399,7 +395,7 @@ entUnaUser:
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
 	lda	$8, 0x3fff
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 	bic	$sp, $8, $8
 	jsr	$26, do_entUnaUser
 	ldq	$9, 0($sp)
@@ -409,7 +405,7 @@ entUnaUser:
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	lda	$sp, 56($sp)
+	lda	$sp, 64($sp)
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -417,7 +413,7 @@ entUnaUser:
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entUna
 
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 86185021f75a..a08e8edef1a4 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -1210,8 +1210,7 @@ SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
 	return ret;
 }
 
-/* Get an address range which is currently unmapped.  Similar to the
-   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
+/* Get an address range which is currently unmapped. */
 
 static unsigned long
 arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
@@ -1230,13 +1229,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		       unsigned long len, unsigned long pgoff,
 		       unsigned long flags, vm_flags_t vm_flags)
 {
-	unsigned long limit;
-
-	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
-	if (current->personality & ADDR_LIMIT_32BIT)
-		limit = 0x80000000;
-	else
-		limit = TASK_SIZE;
+	unsigned long limit = TASK_SIZE;
 
 	if (len > limit)
 		return -ENOMEM;
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 4458eb7f44f0..8e9b4ac86b7e 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -391,10 +391,7 @@ alloc_pci_controller(void)
 {
 	struct pci_controller *hose;
 
-	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
-	if (!hose)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*hose));
+	hose = memblock_alloc_or_panic(sizeof(*hose), SMP_CACHE_BYTES);
 
 	*hose_tail = hose;
 	hose_tail = &hose->next;
@@ -405,13 +402,7 @@ alloc_pci_controller(void)
 struct resource * __init
 alloc_resource(void)
 {
-	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-
-	if (!ptr)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(struct resource));
-
-	return ptr;
+	return memblock_alloc_or_panic(sizeof(struct resource), SMP_CACHE_BYTES);
 }
 
 
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 7fcf3e9b7103..955b6ca61627 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -13,6 +13,7 @@
 #include <linux/log2.h>
 #include <linux/dma-map-ops.h>
 #include <linux/iommu-helper.h>
+#include <linux/string_choices.h>
 
 #include <asm/io.h>
 #include <asm/hwrpb.h>
@@ -71,14 +72,8 @@ iommu_arena_new_node(int nid, struct pci_controller *hose, dma_addr_t base,
 	if (align < mem_size)
 		align = mem_size;
 
-	arena = memblock_alloc(sizeof(*arena), SMP_CACHE_BYTES);
-	if (!arena)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*arena));
-	arena->ptes = memblock_alloc(mem_size, align);
-	if (!arena->ptes)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, mem_size, align);
+	arena = memblock_alloc_or_panic(sizeof(*arena), SMP_CACHE_BYTES);
+	arena->ptes = memblock_alloc_or_panic(mem_size, align);
 
 	spin_lock_init(&arena->lock);
 	arena->hose = hose;
@@ -218,7 +213,7 @@ static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
 
 	/* If both conditions above are met, we are fine. */
 	DBGA("pci_dac_dma_supported %s from %ps\n",
-	     ok ? "yes" : "no", __builtin_return_address(0));
+	     str_yes_no(ok), __builtin_return_address(0));
 
 	return ok;
 }
@@ -229,28 +224,26 @@ static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
    until either pci_unmap_single or pci_dma_sync_single is performed.  */
 
 static dma_addr_t
-pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
+pci_map_single_1(struct pci_dev *pdev, phys_addr_t paddr, size_t size,
 		 int dac_allowed)
 {
 	struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose;
 	dma_addr_t max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
+	unsigned long offset = offset_in_page(paddr);
 	struct pci_iommu_arena *arena;
 	long npages, dma_ofs, i;
-	unsigned long paddr;
 	dma_addr_t ret;
 	unsigned int align = 0;
 	struct device *dev = pdev ? &pdev->dev : NULL;
 
-	paddr = __pa(cpu_addr);
-
 #if !DEBUG_NODIRECT
 	/* First check to see if we can use the direct map window.  */
 	if (paddr + size + __direct_map_base - 1 <= max_dma
 	    && paddr + size <= __direct_map_size) {
 		ret = paddr + __direct_map_base;
 
-		DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %ps\n",
-		      cpu_addr, size, ret, __builtin_return_address(0));
+		DBGA2("pci_map_single: [%pa,%zx] -> direct %llx from %ps\n",
+		      &paddr, size, ret, __builtin_return_address(0));
 
 		return ret;
 	}
@@ -260,8 +253,8 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 	if (dac_allowed) {
 		ret = paddr + alpha_mv.pci_dac_offset;
 
-		DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %ps\n",
-		      cpu_addr, size, ret, __builtin_return_address(0));
+		DBGA2("pci_map_single: [%pa,%zx] -> DAC %llx from %ps\n",
+		      &paddr, size, ret, __builtin_return_address(0));
 
 		return ret;
 	}
@@ -295,10 +288,10 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 		arena->ptes[i + dma_ofs] = mk_iommu_pte(paddr);
 
 	ret = arena->dma_base + dma_ofs * PAGE_SIZE;
-	ret += (unsigned long)cpu_addr & ~PAGE_MASK;
+	ret += offset;
 
-	DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %ps\n",
-	      cpu_addr, size, npages, ret, __builtin_return_address(0));
+	DBGA2("pci_map_single: [%pa,%zx] np %ld -> sg %llx from %ps\n",
+	      &paddr, size, npages, ret, __builtin_return_address(0));
 
 	return ret;
 }
@@ -327,19 +320,18 @@ static struct pci_dev *alpha_gendev_to_pci(struct device *dev)
 	return NULL;
 }
 
-static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
-				     unsigned long offset, size_t size,
-				     enum dma_data_direction dir,
+static dma_addr_t alpha_pci_map_phys(struct device *dev, phys_addr_t phys,
+				     size_t size, enum dma_data_direction dir,
 				     unsigned long attrs)
 {
 	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	int dac_allowed;
 
-	BUG_ON(dir == DMA_NONE);
+	if (unlikely(attrs & DMA_ATTR_MMIO))
+		return DMA_MAPPING_ERROR;
 
-	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; 
-	return pci_map_single_1(pdev, (char *)page_address(page) + offset, 
-				size, dac_allowed);
+	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
+	return pci_map_single_1(pdev, phys, size, dac_allowed);
 }
 
 /* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
@@ -348,7 +340,7 @@ static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
    the cpu to the buffer are guaranteed to see whatever the device
    wrote there.  */
 
-static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
+static void alpha_pci_unmap_phys(struct device *dev, dma_addr_t dma_addr,
 				 size_t size, enum dma_data_direction dir,
 				 unsigned long attrs)
 {
@@ -358,8 +350,6 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
 	struct pci_iommu_arena *arena;
 	long dma_ofs, npages;
 
-	BUG_ON(dir == DMA_NONE);
-
 	if (dma_addr >= __direct_map_base
 	    && dma_addr < __direct_map_base + __direct_map_size) {
 		/* Nothing to do.  */
@@ -434,7 +424,7 @@ try_again:
 	}
 	memset(cpu_addr, 0, size);
 
-	*dma_addrp = pci_map_single_1(pdev, cpu_addr, size, 0);
+	*dma_addrp = pci_map_single_1(pdev, virt_to_phys(cpu_addr), size, 0);
 	if (*dma_addrp == DMA_MAPPING_ERROR) {
 		free_pages((unsigned long)cpu_addr, order);
 		if (alpha_mv.mv_pci_tbi || (gfp & GFP_DMA))
@@ -648,9 +638,8 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 	/* Fast path single entry scatterlists.  */
 	if (nents == 1) {
 		sg->dma_length = sg->length;
-		sg->dma_address
-		  = pci_map_single_1(pdev, SG_ENT_VIRT_ADDRESS(sg),
-				     sg->length, dac_allowed);
+		sg->dma_address = pci_map_single_1(pdev, sg_phys(sg),
+						   sg->length, dac_allowed);
 		if (sg->dma_address == DMA_MAPPING_ERROR)
 			return -EIO;
 		return 1;
@@ -922,8 +911,8 @@ iommu_unbind(struct pci_iommu_arena *arena, long pg_start, long pg_count)
 const struct dma_map_ops alpha_pci_ops = {
 	.alloc			= alpha_pci_alloc_coherent,
 	.free			= alpha_pci_free_coherent,
-	.map_page		= alpha_pci_map_page,
-	.unmap_page		= alpha_pci_unmap_page,
+	.map_phys		= alpha_pci_map_phys,
+	.unmap_phys		= alpha_pci_unmap_phys,
 	.map_sg			= alpha_pci_map_sg,
 	.unmap_sg		= alpha_pci_unmap_sg,
 	.dma_supported		= alpha_pci_supported,
diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c
index 1f0eb4f25c0f..a3eaab094ece 100644
--- a/arch/alpha/kernel/perf_event.c
+++ b/arch/alpha/kernel/perf_event.c
@@ -852,14 +852,9 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 	alpha_perf_event_update(event, hwc, idx, alpha_pmu->pmc_max_period[idx]+1);
 	perf_sample_data_init(&data, 0, hwc->last_period);
 
-	if (alpha_perf_event_set_period(event, hwc, idx)) {
-		if (perf_event_overflow(event, &data, regs)) {
-			/* Interrupts coming too quickly; "throttle" the
-			 * counter, i.e., disable it for a little while.
-			 */
-			alpha_pmu_stop(event, 0);
-		}
-	}
+	if (alpha_perf_event_set_period(event, hwc, idx))
+		perf_event_overflow(event, &data, regs);
+
 	wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
 
 	return;
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 582d96548385..06522451f018 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -231,7 +231,7 @@ flush_thread(void)
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	extern void ret_from_fork(void);
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 3e61073f4b30..d19e51ec711d 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -69,7 +69,8 @@ srmcons_do_receive_chars(struct tty_port *port)
 static void
 srmcons_receive_chars(struct timer_list *t)
 {
-	struct srmcons_private *srmconsp = from_timer(srmconsp, t, timer);
+	struct srmcons_private *srmconsp = timer_container_of(srmconsp, t,
+							      timer);
 	struct tty_port *port = &srmconsp->port;
 	unsigned long flags;
 	int incr = 10;
@@ -177,7 +178,7 @@ srmcons_close(struct tty_struct *tty, struct file *filp)
 
 	if (tty->count == 1) {
 		port->tty = NULL;
-		del_timer(&srmconsp->timer);
+		timer_delete(&srmconsp->timer);
 	}
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -196,40 +197,44 @@ static const struct tty_operations srmcons_ops = {
 static int __init
 srmcons_init(void)
 {
+	struct tty_driver *driver;
+	int err;
+
 	timer_setup(&srmcons_singleton.timer, srmcons_receive_chars, 0);
-	if (srm_is_registered_console) {
-		struct tty_driver *driver;
-		int err;
-
-		driver = tty_alloc_driver(MAX_SRM_CONSOLE_DEVICES, 0);
-		if (IS_ERR(driver))
-			return PTR_ERR(driver);
-
-		tty_port_init(&srmcons_singleton.port);
-
-		driver->driver_name = "srm";
-		driver->name = "srm";
-		driver->major = 0; 	/* dynamic */
-		driver->minor_start = 0;
-		driver->type = TTY_DRIVER_TYPE_SYSTEM;
-		driver->subtype = SYSTEM_TYPE_SYSCONS;
-		driver->init_termios = tty_std_termios;
-		tty_set_operations(driver, &srmcons_ops);
-		tty_port_link_device(&srmcons_singleton.port, driver, 0);
-		err = tty_register_driver(driver);
-		if (err) {
-			tty_driver_kref_put(driver);
-			tty_port_destroy(&srmcons_singleton.port);
-			return err;
-		}
-		srmcons_driver = driver;
-	}
 
-	return -ENODEV;
+	if (!srm_is_registered_console)
+		return -ENODEV;
+
+	driver = tty_alloc_driver(MAX_SRM_CONSOLE_DEVICES, 0);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
+
+	tty_port_init(&srmcons_singleton.port);
+
+	driver->driver_name = "srm";
+	driver->name = "srm";
+	driver->major = 0;	/* dynamic */
+	driver->minor_start = 0;
+	driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	driver->subtype = SYSTEM_TYPE_SYSCONS;
+	driver->init_termios = tty_std_termios;
+	tty_set_operations(driver, &srmcons_ops);
+	tty_port_link_device(&srmcons_singleton.port, driver, 0);
+	err = tty_register_driver(driver);
+	if (err)
+		goto err_free_drv;
+
+	srmcons_driver = driver;
+
+	return 0;
+err_free_drv:
+	tty_driver_kref_put(driver);
+	tty_port_destroy(&srmcons_singleton.port);
+
+	return err;
 }
 device_initcall(srmcons_init);
 
-
 /*
  * The console driver
  */
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index c59d53d6d3f3..3fed97478058 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -506,3 +506,7 @@
 574	common	getxattrat			sys_getxattrat
 575	common	listxattrat			sys_listxattrat
 576	common	removexattrat			sys_removexattrat
+577	common	open_tree_attr			sys_open_tree_attr
+578	common	file_getattr			sys_file_getattr
+579	common	file_setattr			sys_file_setattr
+580	common	listns				sys_listns
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index a9a38c80c4a7..7004397937cf 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -649,7 +649,7 @@ s_reg_to_mem (unsigned long s_reg)
 static int unauser_reg_offsets[32] = {
 	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
 	/* r9 ... r15 are stored in front of regs.  */
-	-56, -48, -40, -32, -24, -16, -8,
+	-64, -56, -48, -40, -32, -24, -16,	/* padding at -8 */
 	R(r16), R(r17), R(r18),
 	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
 	R(r27), R(r28), R(gp),
diff --git a/arch/alpha/lib/fpreg.c b/arch/alpha/lib/fpreg.c
index 9a238e7536ae..3d32165043f8 100644
--- a/arch/alpha/lib/fpreg.c
+++ b/arch/alpha/lib/fpreg.c
@@ -10,7 +10,6 @@
 #include <linux/preempt.h>
 #include <asm/fpu.h>
 #include <asm/thread_info.h>
-#include <asm/fpu.h>
 
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
 #define STT(reg,val)  asm volatile ("ftoit $f"#reg",%0" : "=r"(val));
diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
index 8c9850437e67..a9816bbc9f34 100644
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@@ -78,8 +78,8 @@ __load_new_mm_context(struct mm_struct *next_mm)
 
 /* Macro for exception fixup code to access integer registers.  */
 #define dpf_reg(r)							\
-	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 :	\
-				 (r) <= 18 ? (r)+10 : (r)-10])
+	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-17 :	\
+				 (r) <= 18 ? (r)+11 : (r)-10])
 
 asmlinkage void
 do_page_fault(unsigned long address, unsigned long mmcsr,
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 4fe618446e4c..4c5ab9cd8a0a 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -42,7 +42,7 @@ pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *ret, *init;
 
-	ret = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+	ret = __pgd_alloc(mm, 0);
 	init = pgd_offset(&init_mm, 0UL);
 	if (ret) {
 #ifdef CONFIG_ALPHA_LARGE_VMALLOC
@@ -60,33 +60,6 @@ pgd_alloc(struct mm_struct *mm)
 }
 
 
-/*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving an inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-pmd_t *
-__bad_pagetable(void)
-{
-	memset(absolute_pointer(EMPTY_PGT), 0, PAGE_SIZE);
-	return (pmd_t *) EMPTY_PGT;
-}
-
-pte_t
-__bad_page(void)
-{
-	memset(absolute_pointer(EMPTY_PGE), 0, PAGE_SIZE);
-	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
-}
-
 static inline unsigned long
 load_PCB(struct pcb_struct *pcb)
 {
@@ -273,14 +246,6 @@ srm_paging_stop (void)
 }
 #endif
 
-void __init
-mem_init(void)
-{
-	set_max_mapnr(max_low_pfn);
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
-	memblock_free_all();
-}
-
 static const pgprot_t protection_map[16] = {
 	[VM_NONE]					= _PAGE_P(_PAGE_FOE | _PAGE_FOW |
 								  _PAGE_FOR),
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 5b2488142041..f27e6b90428e 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -6,6 +6,7 @@
 config ARC
 	def_bool y
 	select ARC_TIMERS
+	select ARCH_HAS_CPU_CACHE_ALIASING
 	select ARCH_HAS_CACHE_LINE_SIZE
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DMA_PREP_COHERENT
@@ -17,6 +18,7 @@ config ARC
 	select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
 	select ARCH_32BIT_OFF_T
 	select BUILDTIME_TABLE_SORT
+	select GENERIC_BUILTIN_DTB
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select DMA_DIRECT_REMAP
@@ -24,7 +26,6 @@ config ARC
 	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
-	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_IOREMAP
@@ -297,7 +298,6 @@ config ARC_PAGE_SIZE_16K
 config ARC_PAGE_SIZE_4K
 	bool "4KB"
 	select HAVE_PAGE_SIZE_4KB
-	depends on ARC_MMU_V3 || ARC_MMU_V4
 
 endchoice
 
@@ -474,7 +474,8 @@ config HIGHMEM
 
 config ARC_HAS_PAE40
 	bool "Support for the 40-bit Physical Address Extension"
-	depends on ISA_ARCV2
+	depends on ARC_MMU_V4
+	depends on !ARC_PAGE_SIZE_4K
 	select HIGHMEM
 	select PHYS_ADDR_T_64BIT
 	help
@@ -550,11 +551,11 @@ config ARC_DBG_JUMP_LABEL
 	  part of static keys (jump labels) related code.
 endif
 
-config ARC_BUILTIN_DTB_NAME
+config BUILTIN_DTB_NAME
 	string "Built in DTB"
+	default "nsim_700"
 	help
-	  Set the name of the DTB to embed in the vmlinux binary
-	  Leaving it blank selects the "nsim_700" dtb.
+	  Set the name of the DTB to embed in the vmlinux binary.
 
 endmenu	 # "ARC Architecture Configuration"
 
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 2390dd042e36..0c5e6e6314f2 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -6,7 +6,7 @@
 KBUILD_DEFCONFIG := haps_hs_smp_defconfig
 
 ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux- arc-linux-gnu-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
@@ -82,9 +82,6 @@ KBUILD_CFLAGS	+= $(cflags-y)
 KBUILD_AFLAGS	+= $(KBUILD_CFLAGS)
 KBUILD_LDFLAGS	+= $(ldflags-y)
 
-# w/o this dtb won't embed into kernel binary
-core-y		+= arch/arc/boot/dts/
-
 core-y				+= arch/arc/plat-sim/
 core-$(CONFIG_ARC_PLAT_TB10X)	+= arch/arc/plat-tb10x/
 core-$(CONFIG_ARC_PLAT_AXS10X)	+= arch/arc/plat-axs10x/
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
index 48704dfdf75c..ee5664f0640d 100644
--- a/arch/arc/boot/dts/Makefile
+++ b/arch/arc/boot/dts/Makefile
@@ -1,13 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
-# Built-in dtb
-builtindtb-y		:= nsim_700
 
-ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),)
-	builtindtb-y	:= $(CONFIG_ARC_BUILTIN_DTB_NAME)
-endif
-
-obj-y   += $(builtindtb-y).dtb.o
-dtb-y := $(builtindtb-y).dtb
+dtb-y	:= $(addsuffix .dtb, $(CONFIG_BUILTIN_DTB_NAME))
 
 # for CONFIG_OF_ALL_DTBS test
 dtb-	:= $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index 2a151607b080..88bcc7ab6f5a 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -54,7 +54,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index c0a812674ce9..9a2dc39a5cff 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -62,7 +62,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 67556f4b7057..f31382cb8be4 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -69,7 +69,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index b64435385304..3add2fe257f8 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -250,7 +250,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 			};
 
@@ -258,7 +258,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <1>;
 			};
 
@@ -266,7 +266,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <2>;
 			};
 		};
@@ -281,7 +281,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 			};
 
@@ -289,7 +289,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <10>;
+				ngpios = <10>;
 				reg = <1>;
 			};
 
@@ -297,7 +297,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <2>;
 			};
 		};
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 41b980df862b..98bb850722a4 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -308,7 +308,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <24>;
+				ngpios = <24>;
 				reg = <0>;
 			};
 		};
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index 319bbe270322..f930396d9dae 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -23,7 +23,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS101=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
-CONFIG_ARC_BUILTIN_DTB_NAME="axs101"
+CONFIG_BUILTIN_DTB_NAME="axs101"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -88,7 +88,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index 8c1f1a111a17..6b779dee5ea0 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -22,7 +22,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="axs103"
+CONFIG_BUILTIN_DTB_NAME="axs103"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -86,7 +86,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index 75cab9f25b5b..a89b50d5369d 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -22,7 +22,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="axs103_idu"
+CONFIG_BUILTIN_DTB_NAME="axs103_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -88,7 +88,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig
index 8c3ed5d6e6c3..3a1577112078 100644
--- a/arch/arc/configs/haps_hs_defconfig
+++ b/arch/arc/configs/haps_hs_defconfig
@@ -14,7 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs"
+CONFIG_BUILTIN_DTB_NAME="haps_hs"
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_COMPACTION is not set
diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig
index 6fc98c1b9b36..a3cf940b1f5b 100644
--- a/arch/arc/configs/haps_hs_smp_defconfig
+++ b/arch/arc/configs/haps_hs_smp_defconfig
@@ -16,7 +16,7 @@ CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu"
+CONFIG_BUILTIN_DTB_NAME="haps_hs_idu"
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index 9e79154b5535..1b8b2a098cda 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -20,7 +20,7 @@ CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 CONFIG_LINUX_LINK_BASE=0x90000000
 CONFIG_LINUX_RAM_BASE=0x80000000
-CONFIG_ARC_BUILTIN_DTB_NAME="hsdk"
+CONFIG_BUILTIN_DTB_NAME="hsdk"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -77,7 +77,7 @@ CONFIG_DMADEVICES=y
 CONFIG_DW_AXI_DMAC=y
 CONFIG_IIO=y
 CONFIG_TI_ADC108S102=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig
index 51092c39e360..f8b3235d9a65 100644
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@@ -17,7 +17,7 @@ CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_ISA_ARCOMPACT=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
+CONFIG_BUILTIN_DTB_NAME="nsim_700"
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig
index 70c17bca4939..ee45dc0877fb 100644
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -19,7 +19,7 @@ CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
+CONFIG_BUILTIN_DTB_NAME="nsimosci"
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig
index 59a3b6642fe7..e0a309970c20 100644
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@@ -19,7 +19,7 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs"
+CONFIG_BUILTIN_DTB_NAME="nsimosci_hs"
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig
index 1419fc946a08..88325b8b49cf 100644
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@@ -16,7 +16,7 @@ CONFIG_MODULES=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
+CONFIG_BUILTIN_DTB_NAME="nsimosci_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
index 5aba3d850fa2..865fbc19ef03 100644
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@@ -26,7 +26,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARC_PLAT_TB10X=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
 CONFIG_HZ=250
-CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
+CONFIG_BUILTIN_DTB_NAME="abilis_tb100_dvk"
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
index 50c343913825..b7120523e09a 100644
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -13,7 +13,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38"
+CONFIG_BUILTIN_DTB_NAME="vdk_hs38"
 CONFIG_PREEMPT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -74,7 +74,7 @@ CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index 6d9e1d9f71d2..4077abd5980c 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -15,7 +15,7 @@ CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
+CONFIG_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -81,7 +81,7 @@ CONFIG_MMC_DW=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 4b13f60fe7ca..d84908a177bd 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -144,16 +144,13 @@
 #define ARC_AUX_AGU_MOD2	0x5E2
 #define ARC_AUX_AGU_MOD3	0x5E3
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
-#include <soc/arc/aux.h>
+#include <soc/arc/arc_aux.h>
 
 /* Helpers */
 #define TO_KB(bytes)		((bytes) >> 10)
 #define TO_MB(bytes)		(TO_KB(bytes) >> 10)
-#define PAGES_TO_KB(n_pages)	((n_pages) << (PAGE_SHIFT - 10))
-#define PAGES_TO_MB(n_pages)	(PAGES_TO_KB(n_pages) >> 10)
-
 
 /*
  ***************************************************************
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 592d7fffc223..e615c42b93ba 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_ATOMIC_H
 #define _ASM_ARC_ATOMIC_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
@@ -31,6 +31,6 @@
 #include <asm/atomic64-arcv2.h>
 #endif
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/atomic64-arcv2.h b/arch/arc/include/asm/atomic64-arcv2.h
index 9b5791b85471..73080a664369 100644
--- a/arch/arc/include/asm/atomic64-arcv2.h
+++ b/arch/arc/include/asm/atomic64-arcv2.h
@@ -137,12 +137,9 @@ ATOMIC64_OPS(xor, xor, xor)
 #undef ATOMIC64_OP_RETURN
 #undef ATOMIC64_OP
 
-static inline s64
-arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
+static inline u64 __arch_cmpxchg64_relaxed(volatile void *ptr, u64 old, u64 new)
 {
-	s64 prev;
-
-	smp_mb();
+	u64 prev;
 
 	__asm__ __volatile__(
 	"1:	llockd  %0, [%1]	\n"
@@ -152,14 +149,12 @@ arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
 	"	bnz     1b		\n"
 	"2:				\n"
 	: "=&r"(prev)
-	: "r"(ptr), "ir"(expected), "r"(new)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
+	: "r"(ptr), "ir"(old), "r"(new)
+	: "memory", "cc");
 
 	return prev;
 }
-#define arch_atomic64_cmpxchg arch_atomic64_cmpxchg
+#define arch_cmpxchg64_relaxed __arch_cmpxchg64_relaxed
 
 static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
 {
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index f5a936496f06..df894235fdbc 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -10,7 +10,7 @@
 #error only <linux/bitops.h> can be included directly
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
@@ -133,6 +133,8 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
  */
 static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
+	if (__builtin_constant_p(x))
+		return x ? BITS_PER_LONG - 1 - __builtin_clzl(x) : 0;
 	/* FLS insn has exactly same semantics as the API */
 	return	__builtin_arc_fls(x);
 }
@@ -192,6 +194,6 @@ static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
 #include <asm-generic/bitops/le.h>
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/bug.h b/arch/arc/include/asm/bug.h
index 4c453ba96c51..171c16021f70 100644
--- a/arch/arc/include/asm/bug.h
+++ b/arch/arc/include/asm/bug.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_BUG_H
 #define _ASM_ARC_BUG_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
 
@@ -29,6 +29,6 @@ void die(const char *str, struct pt_regs *regs, unsigned long address);
 
 #include <asm-generic/bug.h>
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index f0f1fc5d62b6..040a97f4dd82 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -23,7 +23,7 @@
  */
 #define ARC_UNCACHED_ADDR_SPACE	0xc0000000
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/build_bug.h>
 
@@ -65,7 +65,7 @@
 extern int ioc_enable;
 extern unsigned long perip_base, perip_end;
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 /* Instruction cache related Auxiliary registers */
 #define ARC_REG_IC_BCR		0x77	/* Build Config reg */
diff --git a/arch/arc/include/asm/cachetype.h b/arch/arc/include/asm/cachetype.h
new file mode 100644
index 000000000000..acd3b6cb4bf5
--- /dev/null
+++ b/arch/arc/include/asm/cachetype.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARC_CACHETYPE_H
+#define __ASM_ARC_CACHETYPE_H
+
+#define cpu_dcache_is_aliasing()	false
+#define cpu_icache_is_aliasing()	true
+
+#endif
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index 58045c898340..76f43db0890f 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -48,7 +48,7 @@
 									\
 	switch(sizeof((_p_))) {						\
 	case 1:								\
-		_prev_ = (__typeof__(*(ptr)))cmpxchg_emu_u8((volatile u8 *)_p_, (uintptr_t)_o_, (uintptr_t)_n_);	\
+		_prev_ = (__typeof__(*(ptr)))cmpxchg_emu_u8((volatile u8 *__force)_p_, (uintptr_t)_o_, (uintptr_t)_n_);	\
 		break;							\
 	case 4:								\
 		_prev_ = __cmpxchg(_p_, _o_, _n_);			\
diff --git a/arch/arc/include/asm/current.h b/arch/arc/include/asm/current.h
index 06be89f6f2f0..03ffd005f3fa 100644
--- a/arch/arc/include/asm/current.h
+++ b/arch/arc/include/asm/current.h
@@ -9,7 +9,7 @@
 #ifndef _ASM_ARC_CURRENT_H
 #define _ASM_ARC_CURRENT_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_ARC_CURR_IN_REG
 
@@ -20,6 +20,6 @@ register struct task_struct *curr_arc asm("gp");
 #include <asm-generic/current.h>
 #endif /* ! CONFIG_ARC_CURR_IN_REG */
 
-#endif /* ! __ASSEMBLY__ */
+#endif /* ! __ASSEMBLER__ */
 
 #endif /* _ASM_ARC_CURRENT_H */
diff --git a/arch/arc/include/asm/dsp-impl.h b/arch/arc/include/asm/dsp-impl.h
index cd5636dfeb6f..fd5fdaad90c1 100644
--- a/arch/arc/include/asm/dsp-impl.h
+++ b/arch/arc/include/asm/dsp-impl.h
@@ -11,7 +11,7 @@
 
 #define DSP_CTRL_DISABLED_ALL		0
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 /* clobbers r5 register */
 .macro DSP_EARLY_INIT
diff --git a/arch/arc/include/asm/dsp.h b/arch/arc/include/asm/dsp.h
index f496dbc4640b..eeaaf4e4eabd 100644
--- a/arch/arc/include/asm/dsp.h
+++ b/arch/arc/include/asm/dsp.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_ARC_DSP_H
 #define __ASM_ARC_DSP_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * DSP-related saved registers - need to be saved only when you are
@@ -24,6 +24,6 @@ struct dsp_callee_regs {
 #endif
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_ARC_DSP_H */
diff --git a/arch/arc/include/asm/dwarf.h b/arch/arc/include/asm/dwarf.h
index a0d5ebe1bc3f..1524c5cf8b59 100644
--- a/arch/arc/include/asm/dwarf.h
+++ b/arch/arc/include/asm/dwarf.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_DWARF_H
 #define _ASM_ARC_DWARF_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef ARC_DW2_UNWIND_AS_CFI
 
@@ -38,6 +38,6 @@
 
 #endif	/* !ARC_DW2_UNWIND_AS_CFI */
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* _ASM_ARC_DWARF_H */
diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
index 38c35722cebf..f453af251a1a 100644
--- a/arch/arc/include/asm/entry.h
+++ b/arch/arc/include/asm/entry.h
@@ -13,7 +13,7 @@
 #include <asm/processor.h>	/* For VMALLOC_START */
 #include <asm/mmu.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef CONFIG_ISA_ARCOMPACT
 #include <asm/entry-compact.h>	/* ISA specific bits */
@@ -146,7 +146,7 @@
 
 #endif	/* CONFIG_ARC_CURR_IN_REG */
 
-#else	/* !__ASSEMBLY__ */
+#else	/* !__ASSEMBLER__ */
 
 extern void do_signal(struct pt_regs *);
 extern void do_notify_resume(struct pt_regs *);
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h
index 8a2441670a8f..7765dc105d54 100644
--- a/arch/arc/include/asm/hugepage.h
+++ b/arch/arc/include/asm/hugepage.h
@@ -40,8 +40,6 @@ static inline pmd_t pte_pmd(pte_t pte)
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 
-#define mk_pmd(page, prot)	pte_pmd(mk_pte(page, prot))
-
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) & _PAGE_HW_SZ)
 
 #define pfn_pmd(pfn, prot)	(__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h
index fb3c21f1a238..30aea562f8aa 100644
--- a/arch/arc/include/asm/irqflags-arcv2.h
+++ b/arch/arc/include/asm/irqflags-arcv2.h
@@ -50,7 +50,7 @@
 #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | __AD_ENB | \
 					(ARCV2_IRQ_DEF_PRIO << 1))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * Save IRQ state and disable IRQs
@@ -170,6 +170,6 @@ static inline void arc_softirq_clear(int irq)
 	seti
 .endm
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
index 936a2f21f315..85c2f6bcde0c 100644
--- a/arch/arc/include/asm/irqflags-compact.h
+++ b/arch/arc/include/asm/irqflags-compact.h
@@ -40,7 +40,7 @@
 
 #define ISA_INIT_STATUS_BITS	STATUS_IE_MASK
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /******************************************************************
  * IRQ Control Macros
@@ -196,6 +196,6 @@ static inline int arch_irqs_disabled(void)
 	flag	\scratch
 .endm
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/jump_label.h b/arch/arc/include/asm/jump_label.h
index a339223d9e05..66ead75784d9 100644
--- a/arch/arc/include/asm/jump_label.h
+++ b/arch/arc/include/asm/jump_label.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_ARC_JUMP_LABEL_H
 #define _ASM_ARC_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/stringify.h>
 #include <linux/types.h>
@@ -68,5 +68,5 @@ struct jump_entry {
 	jump_label_t key;
 };
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif
diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h
index 8a3fb71e9cfa..ba3cb65b5eaa 100644
--- a/arch/arc/include/asm/linkage.h
+++ b/arch/arc/include/asm/linkage.h
@@ -12,7 +12,7 @@
 #define __ALIGN		.align 4
 #define __ALIGN_STR	__stringify(__ALIGN)
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 .macro ST2 e, o, off
 #ifdef CONFIG_ARC_HAS_LL64
@@ -61,7 +61,7 @@
 	CFI_ENDPROC ASM_NL	\
 	.size name, .-name
 
-#else	/* !__ASSEMBLY__ */
+#else	/* !__ASSEMBLER__ */
 
 #ifdef CONFIG_ARC_HAS_ICCM
 #define __arcfp_code __section(".text.arcfp")
@@ -75,6 +75,6 @@
 #define __arcfp_data __section(".data")
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/mmu-arcv2.h b/arch/arc/include/asm/mmu-arcv2.h
index d85dc0721907..5e5482026ac9 100644
--- a/arch/arc/include/asm/mmu-arcv2.h
+++ b/arch/arc/include/asm/mmu-arcv2.h
@@ -9,7 +9,7 @@
 #ifndef _ASM_ARC_MMU_ARCV2_H
 #define _ASM_ARC_MMU_ARCV2_H
 
-#include <soc/arc/aux.h>
+#include <soc/arc/arc_aux.h>
 
 /*
  * TLB Management regs
@@ -69,7 +69,7 @@
 
 #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct mm_struct;
 extern int pae40_exist_but_not_enab(void);
@@ -100,6 +100,6 @@ static inline void mmu_setup_pgd(struct mm_struct *mm, void *pgd)
 	sr \reg, [ARC_REG_PID]
 .endm
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
index 4ae2db59d494..e3b35ceab582 100644
--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_MMU_H
 #define _ASM_ARC_MMU_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/threads.h>	/* NR_CPUS */
 
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index def0dfb95b43..9720fe6b2c24 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -19,7 +19,7 @@
 
 #endif /* CONFIG_ARC_HAS_PAE40 */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
@@ -136,6 +136,6 @@ static inline unsigned long virt_to_pfn(const void *kaddr)
 #include <asm-generic/memory_model.h>   /* page_to_pfn, pfn_to_page */
 #include <asm-generic/getorder.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/pgalloc.h b/arch/arc/include/asm/pgalloc.h
index 096b8ef58edb..dfae070fe8d5 100644
--- a/arch/arc/include/asm/pgalloc.h
+++ b/arch/arc/include/asm/pgalloc.h
@@ -53,19 +53,14 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte_
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	pgd_t *ret = (pgd_t *) __get_free_page(GFP_KERNEL);
+	pgd_t *ret = __pgd_alloc(mm, 0);
 
 	if (ret) {
 		int num, num2;
-		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
-		memzero(ret, num * sizeof(pgd_t));
 
+		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
 		num2 = VMALLOC_SIZE / PGDIR_SIZE;
 		memcpy(ret + num, swapper_pg_dir + num, num2 * sizeof(pgd_t));
-
-		memzero(ret + num + num2,
-			       (PTRS_PER_PGD - num - num2) * sizeof(pgd_t));
-
 	}
 	return ret;
 }
diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h
index 8ebec1b21d24..4630c5acca05 100644
--- a/arch/arc/include/asm/pgtable-bits-arcv2.h
+++ b/arch/arc/include/asm/pgtable-bits-arcv2.h
@@ -75,7 +75,7 @@
  *     This is to enable COW mechanism
  */
 	/* xwr */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
 #define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
@@ -130,7 +130,7 @@ void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -142,6 +142,6 @@ PTE_BIT_FUNC(swp_clear_exclusive, &= ~(_PAGE_SWP_EXCLUSIVE));
 #include <asm/hugepage.h>
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/pgtable-levels.h b/arch/arc/include/asm/pgtable-levels.h
index 86e148226463..c8f9273372c0 100644
--- a/arch/arc/include/asm/pgtable-levels.h
+++ b/arch/arc/include/asm/pgtable-levels.h
@@ -85,7 +85,7 @@
 
 #define PTRS_PER_PTE		BIT(PMD_SHIFT - PAGE_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #if CONFIG_PGTABLE_LEVELS > 3
 #include <asm-generic/pgtable-nop4d.h>
@@ -142,7 +142,6 @@
 
 #define pmd_pfn(pmd)		((pmd_val(pmd) & PMD_MASK) >> PAGE_SHIFT)
 #define pfn_pmd(pfn,prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
 #endif
 
@@ -177,12 +176,11 @@
 #define set_pte(ptep, pte)	((*(ptep)) = (pte))
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
 #define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
-#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
 
 #ifdef CONFIG_ISA_ARCV2
 #define pmd_leaf(x)		(pmd_val(x) & _PAGE_HW_SZ)
 #endif
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 4cf45a99fd79..bd580e2b62d7 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -19,7 +19,7 @@
  */
 #define	USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern char empty_zero_page[PAGE_SIZE];
 #define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
@@ -29,6 +29,6 @@ extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
 /* to cope with aliasing VIPT cache */
 #define HAVE_ARCH_UNMAPPED_AREA
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index d606658e2fe7..7f7901ac6643 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARC_PROCESSOR_H
 #define __ASM_ARC_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
 #include <asm/dsp.h>
@@ -66,7 +66,7 @@ extern void start_thread(struct pt_regs * regs, unsigned long pc,
 
 extern unsigned int __get_wchan(struct task_struct *p);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Default System Memory Map on ARC
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
index cf79df0b2570..f6c052af8f4d 100644
--- a/arch/arc/include/asm/ptrace.h
+++ b/arch/arc/include/asm/ptrace.h
@@ -10,7 +10,7 @@
 #include <uapi/asm/ptrace.h>
 #include <linux/compiler.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef union {
 	struct {
@@ -172,6 +172,6 @@ static inline unsigned long regs_get_register(struct pt_regs *regs,
 extern int syscall_trace_enter(struct pt_regs *);
 extern void syscall_trace_exit(struct pt_regs *);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_PTRACE_H */
diff --git a/arch/arc/include/asm/switch_to.h b/arch/arc/include/asm/switch_to.h
index 1f85de8288b1..5806106a65f9 100644
--- a/arch/arc/include/asm/switch_to.h
+++ b/arch/arc/include/asm/switch_to.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_SWITCH_TO_H
 #define _ASM_ARC_SWITCH_TO_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/sched.h>
 #include <asm/dsp-impl.h>
diff --git a/arch/arc/include/asm/syscall.h b/arch/arc/include/asm/syscall.h
index 9709256e31c8..728d625a10f1 100644
--- a/arch/arc/include/asm/syscall.h
+++ b/arch/arc/include/asm/syscall.h
@@ -24,6 +24,17 @@ syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 }
 
 static inline void
+syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr)
+{
+	/*
+	 * Unlike syscall_get_nr(), syscall_set_nr() can be called only when
+	 * the target task is stopped for tracing on entering syscall, so
+	 * there is no need to have the same check syscall_get_nr() has.
+	 */
+	regs->r8 = nr;
+}
+
+static inline void
 syscall_rollback(struct task_struct *task, struct pt_regs *regs)
 {
 	regs->r0 = regs->orig_r0;
@@ -67,6 +78,20 @@ syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
 	}
 }
 
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+		      unsigned long *args)
+{
+	unsigned long *inside_ptregs = &regs->r0;
+	unsigned int n = 6;
+	unsigned int i = 0;
+
+	while (n--) {
+		*inside_ptregs = args[i++];
+		inside_ptregs--;
+	}
+}
+
 static inline int
 syscall_get_arch(struct task_struct *task)
 {
diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h
index 12daaf3a61ea..255d2c774219 100644
--- a/arch/arc/include/asm/thread_info.h
+++ b/arch/arc/include/asm/thread_info.h
@@ -24,7 +24,7 @@
 #define THREAD_SIZE     (PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_SHIFT	(PAGE_SHIFT << THREAD_SIZE_ORDER)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/thread_info.h>
 
@@ -62,7 +62,7 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * thread information flags
diff --git a/arch/arc/include/uapi/asm/ptrace.h b/arch/arc/include/uapi/asm/ptrace.h
index 2a6eff57f6dd..3ae832db278c 100644
--- a/arch/arc/include/uapi/asm/ptrace.h
+++ b/arch/arc/include/uapi/asm/ptrace.h
@@ -14,7 +14,7 @@
 
 #define PTRACE_GET_THREAD_AREA	25
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * Userspace ABI: Register state needed by
  *  -ptrace (gdbserver)
@@ -53,6 +53,6 @@ struct user_regs_arcv2 {
 	unsigned long r30, r58, r59;
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _UAPI__ASM_ARC_PTRACE_H */
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index 95fbf9364c67..fa94fff02419 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -26,4 +26,4 @@ ifdef CONFIG_ISA_ARCOMPACT
 CFLAGS_fpu.o   += -mdpfp
 endif
 
-extra-y := vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c
index f77deb799175..2978da85fcb6 100644
--- a/arch/arc/kernel/asm-offsets.c
+++ b/arch/arc/kernel/asm-offsets.c
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  */
+#define COMPILE_OFFSETS
 
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index f324f0e3341a..809edc59af25 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -170,7 +170,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
+	root_domain = irq_domain_create_linear(of_fwnode_handle(intc), nr_cpu_irqs, &arcv2_irq_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
@@ -178,7 +178,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	 * Needed for primary domain lookup to succeed
 	 * This is a primary irqchip, and can never have a parent
 	 */
-	irq_set_default_host(root_domain);
+	irq_set_default_domain(root_domain);
 
 #ifdef CONFIG_SMP
 	irq_create_mapping(root_domain, IPI_IRQ);
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
index 6885e422870e..1b159e9e0234 100644
--- a/arch/arc/kernel/intc-compact.c
+++ b/arch/arc/kernel/intc-compact.c
@@ -112,8 +112,9 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS,
-					    &arc_intc_domain_ops, NULL);
+	root_domain = irq_domain_create_linear(of_fwnode_handle(intc),
+					       NR_CPU_IRQS,
+					       &arc_intc_domain_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
@@ -121,7 +122,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	 * Needed for primary domain lookup to succeed
 	 * This is a primary irqchip, and can never have a parent
 	 */
-	irq_set_default_host(root_domain);
+	irq_set_default_domain(root_domain);
 
 	return 0;
 }
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index 55373ca0d28b..02b28a9324f4 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -357,8 +357,6 @@ static void idu_cascade_isr(struct irq_desc *desc)
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
 {
 	irq_set_chip_and_handler(virq, &idu_irq_chip, handle_level_irq);
-	irq_set_status_flags(virq, IRQ_MOVE_PCNTXT);
-
 	return 0;
 }
 
@@ -393,7 +391,8 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 
 	pr_info("MCIP: IDU supports %u common irqs\n", nr_irqs);
 
-	domain = irq_domain_add_linear(intc, nr_irqs, &idu_irq_ops, NULL);
+	domain = irq_domain_create_linear(of_fwnode_handle(intc), nr_irqs,
+					  &idu_irq_ops, NULL);
 
 	/* Parent interrupts (core-intc) are already mapped */
 
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index 6e5a651cd75c..ed6d4f0cd621 100644
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -599,10 +599,8 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 
 		arc_perf_event_update(event, &event->hw, event->hw.idx);
 		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (arc_pmu_event_set_period(event)) {
-			if (perf_event_overflow(event, &data, regs))
-				arc_pmu_stop(event, 0);
-		}
+		if (arc_pmu_event_set_period(event))
+			perf_event_overflow(event, &data, regs);
 
 		active_ints &= ~BIT(idx);
 	} while (active_ints);
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 186ceab661eb..8166d0908713 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -166,7 +166,7 @@ asmlinkage void ret_from_fork(void);
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *c_regs;        /* child's pt_regs */
diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c
index e0c233c178b1..cad5367b7c37 100644
--- a/arch/arc/kernel/ptrace.c
+++ b/arch/arc/kernel/ptrace.c
@@ -284,7 +284,7 @@ enum arc_getset {
 
 static const struct user_regset arc_regsets[] = {
 	[REGSET_CMN] = {
-	       .core_note_type = NT_PRSTATUS,
+	       USER_REGSET_NOTE_TYPE(PRSTATUS),
 	       .n = ELF_NGREG,
 	       .size = sizeof(unsigned long),
 	       .align = sizeof(unsigned long),
@@ -293,7 +293,7 @@ static const struct user_regset arc_regsets[] = {
 	},
 #ifdef CONFIG_ISA_ARCV2
 	[REGSET_ARCV2] = {
-	       .core_note_type = NT_ARC_V2,
+	       USER_REGSET_NOTE_TYPE(ARC_V2),
 	       .n = ELF_ARCV2REG,
 	       .size = sizeof(unsigned long),
 	       .align = sizeof(unsigned long),
diff --git a/arch/arc/kernel/unaligned.c b/arch/arc/kernel/unaligned.c
index d2f5ceaaed1b..3b2d8b1bd271 100644
--- a/arch/arc/kernel/unaligned.c
+++ b/arch/arc/kernel/unaligned.c
@@ -200,7 +200,6 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		     struct callee_regs *cregs)
 {
 	struct disasm_state state;
-	char buf[TASK_COMM_LEN];
 
 	/* handle user mode only and only if enabled by sysadmin */
 	if (!user_mode(regs) || !unaligned_enabled)
@@ -212,11 +211,11 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 			     " performance significantly\n. To enable further"
 			     " logging of such instances, please \n"
 			     " echo 0 > /proc/sys/kernel/ignore-unaligned-usertrap\n",
-			     get_task_comm(buf, current), task_pid_nr(current));
+			     current->comm, task_pid_nr(current));
 	} else {
 		/* Add rate limiting if it gets down to it */
 		pr_warn("%s(%d): unaligned access to/from 0x%lx by PC: 0x%lx\n",
-			get_task_comm(buf, current), task_pid_nr(current),
+			current->comm, task_pid_nr(current),
 			address, regs->ret);
 
 	}
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index d8969dab12d4..789cfb9ea14e 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -241,15 +241,6 @@ static int cmp_eh_frame_hdr_table_entries(const void *p1, const void *p2)
 	return (e1->start > e2->start) - (e1->start < e2->start);
 }
 
-static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size)
-{
-	struct eh_frame_hdr_table_entry *e1 = p1;
-	struct eh_frame_hdr_table_entry *e2 = p2;
-
-	swap(e1->start, e2->start);
-	swap(e1->fde, e2->fde);
-}
-
 static void init_unwind_hdr(struct unwind_table *table,
 			    void *(*alloc) (unsigned long))
 {
@@ -345,7 +336,7 @@ static void init_unwind_hdr(struct unwind_table *table,
 	sort(header->table,
 	     n,
 	     sizeof(*header->table),
-	     cmp_eh_frame_hdr_table_entries, swap_eh_frame_hdr_table_entries);
+	     cmp_eh_frame_hdr_table_entries, NULL);
 
 	table->hdrsz = hdrSize;
 	smp_wmb();
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index 9106ceac323c..7d2f93dc1e91 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -704,7 +704,7 @@ static inline void arc_slc_enable(void)
 
 void flush_dcache_folio(struct folio *folio)
 {
-	clear_bit(PG_dc_clean, &folio->flags);
+	clear_bit(PG_dc_clean, &folio->flags.f);
 	return;
 }
 EXPORT_SYMBOL(flush_dcache_folio);
@@ -889,8 +889,8 @@ void copy_user_highpage(struct page *to, struct page *from,
 
 	copy_page(kto, kfrom);
 
-	clear_bit(PG_dc_clean, &dst->flags);
-	clear_bit(PG_dc_clean, &src->flags);
+	clear_bit(PG_dc_clean, &dst->flags.f);
+	clear_bit(PG_dc_clean, &src->flags.f);
 
 	kunmap_atomic(kto);
 	kunmap_atomic(kfrom);
@@ -900,7 +900,7 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
 {
 	struct folio *folio = page_folio(page);
 	clear_page(to);
-	clear_bit(PG_dc_clean, &folio->flags);
+	clear_bit(PG_dc_clean, &folio->flags.f);
 }
 EXPORT_SYMBOL(clear_user_page);
 
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index 6a71b23f1383..a73cc94f806e 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -150,41 +150,18 @@ void __init setup_arch_memory(void)
 	 */
 	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
 
-	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
-
 	arch_pfn_offset = min(min_low_pfn, min_high_pfn);
 	kmap_init();
-
-#else /* CONFIG_HIGHMEM */
-	/* pfn_valid() uses this when FLATMEM=y and HIGHMEM=n */
-	max_mapnr = max_low_pfn - min_low_pfn;
-
 #endif /* CONFIG_HIGHMEM */
 
 	free_area_init(max_zone_pfn);
 }
 
-static void __init highmem_init(void)
+void __init arch_mm_preinit(void)
 {
 #ifdef CONFIG_HIGHMEM
-	unsigned long tmp;
-
 	memblock_phys_free(high_mem_start, high_mem_sz);
-	for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
-		free_highmem_page(pfn_to_page(tmp));
 #endif
-}
-
-/*
- * mem_init - initializes memory
- *
- * Frees up bootmem
- * Calculates and displays memory available/used
- */
-void __init mem_init(void)
-{
-	memblock_free_all();
-	highmem_init();
 
 	BUILD_BUG_ON((PTRS_PER_PGD * sizeof(pgd_t)) > PAGE_SIZE);
 	BUILD_BUG_ON((PTRS_PER_PUD * sizeof(pud_t)) > PAGE_SIZE);
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index b07004d53267..fd8897a0e52c 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -32,7 +32,7 @@ void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
 		return (void __iomem *)(u32)paddr;
 
 	return ioremap_prot(paddr, size,
-			    pgprot_val(pgprot_noncached(PAGE_KERNEL)));
+			    pgprot_noncached(PAGE_KERNEL));
 }
 EXPORT_SYMBOL(ioremap);
 
@@ -44,10 +44,8 @@ EXPORT_SYMBOL(ioremap);
  * might need finer access control (R/W/X)
  */
 void __iomem *ioremap_prot(phys_addr_t paddr, size_t size,
-			   unsigned long flags)
+			   pgprot_t prot)
 {
-	pgprot_t prot = __pgprot(flags);
-
 	/* force uncached */
 	return generic_ioremap_prot(paddr, size, pgprot_noncached(prot));
 }
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index cae4a7aae0ed..ed6915ba76ec 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -488,7 +488,7 @@ void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
 	 */
 	if (vma->vm_flags & VM_EXEC) {
 		struct folio *folio = page_folio(page);
-		int dirty = !test_and_set_bit(PG_dc_clean, &folio->flags);
+		int dirty = !test_and_set_bit(PG_dc_clean, &folio->flags.f);
 		if (dirty) {
 			unsigned long offset = offset_in_folio(folio, paddr);
 			nr = folio_nr_pages(folio);
diff --git a/arch/arc/net/bpf_jit_arcv2.c b/arch/arc/net/bpf_jit_arcv2.c
index 4458e409ca0a..6d989b6d88c6 100644
--- a/arch/arc/net/bpf_jit_arcv2.c
+++ b/arch/arc/net/bpf_jit_arcv2.c
@@ -2916,7 +2916,7 @@ bool check_jmp_32(u32 curr_off, u32 targ_off, u8 cond)
 	addendum = (cond == ARC_CC_AL) ? 0 : INSN_len_normal;
 	disp = get_displacement(curr_off + addendum, targ_off);
 
-	if (ARC_CC_AL)
+	if (cond == ARC_CC_AL)
 		return is_valid_far_disp(disp);
 	else
 		return is_valid_near_disp(disp);
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 202397be76d8..ff61891abe53 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -5,6 +5,7 @@ config ARM
 	select ARCH_32BIT_OFF_T
 	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CACHE_LINE_SIZE if OF
 	select ARCH_HAS_CPU_CACHE_ALIASING
 	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
 	select ARCH_HAS_CURRENT_STACK_POINTER
@@ -37,12 +38,14 @@ config ARM
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
 	select ARCH_NEED_CMPXCHG_1_EMU if CPU_V6
 	select ARCH_SUPPORTS_ATOMIC_RMW
-	select ARCH_SUPPORTS_CFI_CLANG
+	select ARCH_SUPPORTS_CFI
 	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
 	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_MEMTEST
+	# https://github.com/llvm/llvm-project/commit/d130f402642fba3d065aacb506cb061c899558de
+	select ARCH_USES_CFI_GENERIC_LLVM_PASS if CLANG_VERSION < 220000
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_IPC_PARSE_VERSION
@@ -84,11 +87,11 @@ config ARM
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
 	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
+	select HAVE_ARCH_KSTACK_ERASE
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_PFN_VALID
 	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
-	select HAVE_ARCH_STACKLEAK
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE
@@ -99,14 +102,15 @@ config ARM
 	select HAVE_BUILDTIME_MCOUNT_SORT
 	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
+	select HAVE_EXTRA_IPI_TRACEPOINTS
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
 	select HAVE_EXIT_THREAD
 	select HAVE_GUP_FAST if ARM_LPAE
-	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_ERROR_INJECTION
 	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
@@ -118,7 +122,7 @@ config ARM
 	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
 	select HAVE_KRETPROBES if HAVE_KPROBES
-	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD)
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD) && LD_CAN_USE_KEEP_IN_OVERLAY
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
@@ -130,6 +134,7 @@ config ARM
 	select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
+	select HAVE_RUST if CPU_LITTLE_ENDIAN && CPU_32v7
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
@@ -164,15 +169,12 @@ config ARM
 	  <http://www.arm.linux.org.uk/>.
 
 config ARM_HAS_GROUP_RELOCS
-	def_bool y
-	depends on !LD_IS_LLD || LLD_VERSION >= 140000
-	depends on !COMPILE_TEST
+	def_bool !COMPILE_TEST
 	help
 	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
-	  relocations, which have been around for a long time, but were not
-	  supported in LLD until version 14. The combined range is -/+ 256 MiB,
-	  which is usually sufficient, but not for allyesconfig, so we disable
-	  this feature when doing compile testing.
+	  relocations. The combined range is -/+ 256 MiB, which is usually
+	  sufficient, but not for allyesconfig, so we disable this feature
+	  when doing compile testing.
 
 config ARM_DMA_USE_IOMMU
 	bool
@@ -391,8 +393,6 @@ source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-hisi/Kconfig"
 
-source "arch/arm/mach-hpe/Kconfig"
-
 source "arch/arm/mach-imx/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
@@ -939,28 +939,14 @@ config IRQSTACKS
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
 	depends on SMP && CPU_V7
+	select ARCH_SUPPORTS_SCHED_MC
+	select ARCH_SUPPORTS_SCHED_SMT
 	default y
 	help
 	  Support ARM cpu topology definition. The MPIDR register defines
 	  affinity between processors which is then used to describe the cpu
 	  topology of an ARM System.
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config HAVE_ARM_SCU
 	bool
 	help
@@ -1175,8 +1161,6 @@ config AEABI
 	  disambiguate both ABIs and allow for backward compatibility support
 	  (selected with CONFIG_OABI_COMPAT).
 
-	  To use this you need GCC version 4.0.0 or later.
-
 config OABI_COMPAT
 	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
 	depends on AEABI && !THUMB2_KERNEL
@@ -1376,8 +1360,7 @@ config CC_HAVE_STACKPROTECTOR_TLS
 config STACKPROTECTOR_PER_TASK
 	bool "Use a unique stack canary value for each task"
 	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
-	depends on GCC_PLUGINS || CC_HAVE_STACKPROTECTOR_TLS
-	select GCC_PLUGIN_ARM_SSP_PER_TASK if !CC_HAVE_STACKPROTECTOR_TLS
+	depends on CC_HAVE_STACKPROTECTOR_TLS
 	default y
 	help
 	  Due to the fact that GCC uses an ordinary symbol reference from
@@ -1751,5 +1734,3 @@ config ARCH_HIBERNATION_POSSIBLE
 	default y if ARCH_SUSPEND_POSSIBLE
 
 endmenu
-
-source "arch/arm/Kconfig.assembler"
diff --git a/arch/arm/Kconfig.assembler b/arch/arm/Kconfig.assembler
deleted file mode 100644
index 5cb31aae1188..000000000000
--- a/arch/arm/Kconfig.assembler
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-config AS_VFP_VMRS_FPINST
-	def_bool $(as-instr,.fpu vfpv2\nvmrs r0$(comma)FPINST)
-	help
-	  Supported by binutils >= 2.24 and LLVM integrated assembler.
diff --git a/arch/arm/Kconfig.platforms b/arch/arm/Kconfig.platforms
index 845ab08e20a4..5c19c1f2cff6 100644
--- a/arch/arm/Kconfig.platforms
+++ b/arch/arm/Kconfig.platforms
@@ -87,6 +87,31 @@ config MACH_ASM9260
 	help
 	  Support for Alphascale ASM9260 based platform.
 
+menuconfig ARCH_HPE
+	bool "HPE SoC support"
+	depends on ARCH_MULTI_V7
+	help
+	  This enables support for HPE ARM based BMC chips.
+
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+	bool "HPE GXP SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_VIC
+	select GENERIC_IRQ_CHIP
+	select CLKSRC_MMIO
+	help
+	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+	  A9 core. It is capable of using an AXI bus to which a memory controller
+	  is attached. It has multiple SPI interfaces to connect boot flash and
+	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+	  has multiple i2c engines to drive connectivity with a host
+	  infrastructure.
+
+endif
+
 menuconfig ARCH_MOXART
 	bool "MOXA ART SoC"
 	depends on ARCH_MULTI_V4
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 00ca7886b18e..b7de4b6b284c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -149,7 +149,8 @@ endif
 # Need -Uarm for gcc < 3.x
 KBUILD_CPPFLAGS	+=$(cpp-y)
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include $(srctree)/arch/arm/include/asm/unified.h -msoft-float
+KBUILD_RUSTFLAGS += --target=arm-unknown-linux-gnueabi
 
 CHECKFLAGS	+= -D__arm__
 
@@ -188,7 +189,6 @@ machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_HPE)		+= hpe
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 945b5975fce2..a159120d1e42 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -9,7 +9,6 @@ OBJS		=
 
 HEAD	= head.o
 OBJS	+= misc.o decompress.o
-CFLAGS_decompress.o += $(DISABLE_STACKLEAK_PLUGIN)
 ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y)
 OBJS	+= debug.o
 AFLAGS_head.o += -DDEBUG
@@ -96,7 +95,8 @@ KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
 ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
 	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
-	     -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
+	     $(DISABLE_KSTACK_ERASE) \
+	     -I$(obj)
 ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
 
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
index 230030c13085..65a3025c0e13 100644
--- a/arch/arm/boot/compressed/efi-header.S
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -20,7 +20,7 @@
 		@ is accepted as an EFI binary. Booting via the UEFI stub
 		@ will not execute those instructions, but the ARM/Linux
 		@ boot protocol does, so we need some NOPs here.
-		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		.inst	IMAGE_DOS_SIGNATURE | (0xe225 << 16) @ eor r5, r5, 0x4d000
 		eor	r5, r5, 0x4d000			@ undo previous insn
 #else
 		__nop
@@ -43,7 +43,7 @@
 		.long	pe_header - start		@ Offset to the PE header.
 
 pe_header:
-		.long	PE_MAGIC
+		.long	IMAGE_NT_SIGNATURE
 
 coff_header:
 		.short	IMAGE_FILE_MACHINE_THUMB	@ Machine
@@ -60,7 +60,7 @@ coff_header:
 #define __pecoff_code_size (__pecoff_data_start - __efi_start)
 
 optional_header:
-		.short	PE_OPT_MAGIC_PE32		@ PE32 format
+		.short	IMAGE_NT_OPTIONAL_HDR32_MAGIC	@ PE32 format
 		.byte	0x02				@ MajorLinkerVersion
 		.byte	0x14				@ MinorLinkerVersion
 		.long	__pecoff_code_size		@ SizeOfCode
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
index 48666f73e638..f71392a55df8 100644
--- a/arch/arm/boot/dts/allwinner/Makefile
+++ b/arch/arm/boot/dts/allwinner/Makefile
@@ -182,6 +182,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-wits-pro-a20-dkt.dtb
 
 # Enables support for device-tree overlays for all pis
+DTC_FLAGS_sun8i-h2-plus-orangepi-zero := -@
 DTC_FLAGS_sun8i-h3-orangepi-lite := -@
 DTC_FLAGS_sun8i-h3-bananapi-m2-plus := -@
 DTC_FLAGS_sun8i-h3-nanopi-m1-plus := -@
@@ -199,6 +200,8 @@ DTC_FLAGS_sun8i-h3-nanopi-r1 := -@
 DTC_FLAGS_sun8i-h3-orangepi-pc := -@
 DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@
 DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@
+DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@
+DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@
 dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-evb.dtb \
 	sun8i-a23-gt90h-v4.dtb \
@@ -224,6 +227,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h2-plus-libretech-all-h3-cc.dtb \
 	sun8i-h2-plus-orangepi-r1.dtb \
 	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h2-plus-orangepi-zero-interface-board.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
 	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
 	sun8i-h3-beelink-x2.dtb \
@@ -243,6 +247,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h3-orangepi-plus.dtb \
 	sun8i-h3-orangepi-plus2e.dtb \
 	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-orangepi-zero-plus2-interface-board.dtb \
 	sun8i-h3-rervision-dvk.dtb \
 	sun8i-h3-zeropi.dtb \
 	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
@@ -256,12 +261,19 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-s3-pinecube.dtb \
 	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t113s-netcube-nagami-basic-carrier.dtb \
+	sun8i-t113s-netcube-nagami-keypad-carrier.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
 	sun8i-v3-sl631-imx179.dtb \
 	sun8i-v3s-anbernic-rg-nano.dtb \
 	sun8i-v3s-licheepi-zero.dtb \
 	sun8i-v3s-licheepi-zero-dock.dtb \
+	sun8i-v3s-netcube-kumquat.dtb \
 	sun8i-v40-bananapi-m2-berry.dtb
+sun8i-h2-plus-orangepi-zero-interface-board-dtbs += \
+	sun8i-h2-plus-orangepi-zero.dtb sun8i-orangepi-zero-interface-board.dtbo
+sun8i-h3-orangepi-zero-plus2-interface-board-dtbs += \
+	sun8i-h3-orangepi-zero-plus2.dtb sun8i-orangepi-zero-interface-board.dtbo
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
index 83d283cf6633..d425d9ee83db 100644
--- a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
@@ -218,7 +218,7 @@
 &usbphy {
 	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
-	usb0_vbus-supply   = <&reg_usb0_vbus>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
index 46ecf9db2324..d8b362c9661a 100644
--- a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
@@ -48,6 +48,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "LeMaker Banana Pi";
@@ -169,6 +170,32 @@
 &gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
index addf0cb0f465..6f88d8764e6a 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
@@ -1225,7 +1225,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu0_hot>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -1255,7 +1255,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu1_hot>;
 					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
index 1b001f2ad0ef..b23cec5b89eb 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
@@ -112,6 +112,20 @@
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - https://linux-sunxi.org/Xunlong_Orange_Pi_Zero#Expansion_Port
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_vdd_cpux>;
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
index 6d85370e04f1..9a2742363cd0 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
@@ -94,7 +94,7 @@
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
index 7a6444a10e25..97a3565ac7a8 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
@@ -99,6 +99,20 @@
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
index eac2349a2380..cfd039840b43 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
@@ -262,7 +262,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git a/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
new file mode 100644
index 000000000000..e137eefee341
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Devicetree overlay for the Orange Pi Zero Interface board (OP0014).
+ *
+ *   https://orangepi.com/index.php?route=product/product&product_id=871
+ *
+ * This overlay applies to the following base files:
+ *
+ * - arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+ * - arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
index 272584881bb2..a0f787581dd9 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
@@ -82,7 +82,7 @@
 };
 
 &ehci0 {
-	status  = "okay";
+	status = "okay";
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
index a5b1f1e3900d..f0ed802a9d08 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
@@ -146,7 +146,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -705,7 +705,7 @@
 			};
 
 			/omit-if-no-ref/
-			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
+			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins {
 				pins = "PI16", "PI17";
 				function = "uart2";
 			};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
new file mode 100644
index 000000000000..5262102a85f6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+/ {
+	model = "NetCube Systems Nagami Basic Carrier Board";
+	compatible = "netcube,nagami-basic-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	broken-cd;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
new file mode 100644
index 000000000000..4ffa6a0216d8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "NetCube Systems Nagami Keypad Carrier Board";
+	compatible = "netcube,nagami-keypad-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: led-status-red {
+			gpios = <&pio 3 16 GPIO_ACTIVE_HIGH>;  /* PD16 */
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_status_green: led-status-green {
+			gpios = <&pio 3 22 GPIO_ACTIVE_HIGH>;  /* PD22 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		reg = <0x34>;
+		interrupts-extended = <&pio 5 6 IRQ_TYPE_EDGE_FALLING>;  /* PF6 */
+		linux,keymap = <MATRIX_KEY(0x03, 0x00, KEY_NUMERIC_A)
+				MATRIX_KEY(0x03, 0x01, KEY_NUMERIC_1)
+				MATRIX_KEY(0x03, 0x02, KEY_NUMERIC_2)
+				MATRIX_KEY(0x03, 0x03, KEY_NUMERIC_3)
+				MATRIX_KEY(0x02, 0x00, KEY_NUMERIC_B)
+				MATRIX_KEY(0x02, 0x01, KEY_NUMERIC_4)
+				MATRIX_KEY(0x02, 0x02, KEY_NUMERIC_5)
+				MATRIX_KEY(0x02, 0x03, KEY_NUMERIC_6)
+				MATRIX_KEY(0x01, 0x00, KEY_NUMERIC_C)
+				MATRIX_KEY(0x01, 0x01, KEY_NUMERIC_7)
+				MATRIX_KEY(0x01, 0x02, KEY_NUMERIC_8)
+				MATRIX_KEY(0x01, 0x03, KEY_NUMERIC_9)
+				MATRIX_KEY(0x00, 0x00, KEY_NUMERIC_D)
+				MATRIX_KEY(0x00, 0x01, KEY_CLEAR)
+				MATRIX_KEY(0x00, 0x02, KEY_NUMERIC_0)
+				MATRIX_KEY(0x00, 0x03, KEY_OK)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+};
+
+&pio {
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PB
+			  "", "", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "", "",
+			  "", "", "", "",
+			  "LED_STATUS_RED", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "LED_STATUS_GREEN", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PF
+			  "", "", "KEY_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
new file mode 100644
index 000000000000..544d60cfc32e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NetCube Systems Nagami SoM";
+	compatible = "netcube,nagami", "allwinner,sun8i-t113s";
+
+	aliases {
+		serial1 = &uart1; // ESP32 Bootloader UART
+		serial3 = &uart3; // Console UART on Card Edge
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	/* module wide 3.3V supply directly from the card edge */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	/* USB0 MUX to switch connect to Card-Edge only after BootROM */
+	usb0_sec_mux: mux-controller{
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */
+		idle-state = <1>; /* USB connected to Card-Edge by default */
+	};
+
+	/* Reset of ESP32 */
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		post-power-on-delay-ms = <1500>;
+		power-off-delay-us = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&emac {
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	phy-handle = <&lan8720a>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&rmii_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Default I2C Interface on Card-Edge */
+&i2c2 {
+	pinctrl-0 = <&i2c2_pd_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Exposed as the QWIIC connector and used by the internal EEPROM */
+&i2c3 {
+	pinctrl-0 = <&i2c3_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
+
+/* Default I2S Interface on Card-Edge */
+&i2s1 {
+	pinctrl-0 = <&i2s1_pins>, <&i2s1_din0_pin>, <&i2s1_dout0_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Phy is on SoM. MDI signals pre-magnetics are on the card edge */
+&mdio {
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+/* Default SD Interface on Card-Edge */
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+/* Connected to the on-board eMMC */
+&mmc2 {
+	pinctrl-0 = <&mmc2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "CAN0_TX", "CAN0_RX", // PB
+			  "CAN1_TX", "CAN1_RX", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "SPI1_CS", "SPI1_CLK",
+			  "SPI1_MOSI", "SPI1_MISO", "SPI1_HOLD", "SPI1_WP",
+			  "PD16", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "PD22", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CLK", // PF
+			  "SD_D3", "SD_D2", "PF6", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "I2S1_WS", "I2S1_CLK", "I2S1_DIN0", "I2S1_DOUT0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Remove the unused CK pin from the pinctl as it is unconnected */
+&rmii_pe_pins {
+	pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+	       "PE5", "PE6", "PE8", "PE9";
+};
+
+/* Default SPI Interface on Card-Edge */
+&spi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&spi1_pins>, <&spi1_hold_pin>, <&spi1_wp_pin>;
+	pinctrl-names = "default";
+	cs-gpios = <0>;
+	status = "disabled";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pg6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Console/Debug UART on Card-Edge */
+&uart3 {
+	pinctrl-0 = <&uart3_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
index 186c30cbe6ee..95bd0b616349 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
@@ -56,6 +56,15 @@
 		function = "i2s";
 	};
 
+	/omit-if-no-ref/
+	lcd_rgb666_pd_pins: lcd-rgb666-pd-pins {
+		pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+		       "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
+		       "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
+		       "PD18", "PD19", "PD20", "PD21";
+		function = "lcd";
+	};
+
 	uart1_pg_pins: uart1-pg-pins {
 		pins = "PG6", "PG7";
 		function = "uart1";
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
new file mode 100644
index 000000000000..cb6292319f39
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	model = "NetCube Systems Kumquat";
+	compatible = "netcube,kumquat", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		rtc0 = &ds3232;
+		rtc1 = &rtc; /* not battery backed */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 40 MHz Crystal Oscillator on PCB */
+	clk_can0: clock-can0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-user {
+			label = "GPIO Key User";
+			linux,code = <KEY_PROG1>;
+			gpios = <&pio 1 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PB2 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-mmc0-act {
+			gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+			linux,default-trigger = "mmc0";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+		};
+	};
+
+	/* EA3036C Switching 3 Channel Regulator - Channel 2 */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* K7805-1000R3 Switching Regulator supplied from main 12/24V terminal block */
+	reg_vcc5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC1", "Mic",
+		"Mic", "HBIAS";
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emac {
+	allwinner,leds-active-low;
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+
+	tusb320: typec@60 {
+		compatible = "ti,tusb320";
+		reg = <0x60>;
+		interrupts-extended = <&pio 1 5 IRQ_TYPE_LEVEL_LOW>;  /* PB5 */
+	};
+
+	ds3232: rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+/* Exposed as the Flash/SD Header on the board */
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&osc32k {
+	status = "disabled";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "CAN_nCS", "CAN_nINT", "USER_SW", "PB3", // PB
+			  "USB_ID", "USBC_nINT", "I2C0_SCL", "I2C0_SDA",
+			  "UART0_TX", "UART0_RX", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SPI_MISO", "SPI_SCK", "FLASH_nCS", "SPI_MOSI", // PC
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "Q12", "Q11", "Q10", "Q9", // PE
+			  "LED_SYS0", "I1", "Q1", "Q2",
+			  "I2", "I3", "Q3", "Q4",
+			  "I4", "I5", "Q5", "Q6",
+			  "I6", "I7", "Q7", "Q8",
+			  "I8", "UART1_TXD", "UART1_RXD", "ESP_nRST",
+			  "ESP_nBOOT", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CMD", // PF
+			  "SD_D3", "SD_D2", "LED_SYS1", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&rtc {
+	/delete-property/ clocks;
+};
+
+/* Exposed as a USB-C connector with USB-Serial converter */
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	extcon = <&tusb320 0>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	status = "okay";
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <0>, <&pio 1 0 GPIO_ACTIVE_LOW>; /* PB0 */
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		label = "firmware";
+		spi-max-frequency = <40000000>;
+	};
+
+	can@1 {
+		compatible = "microchip,mcp2518fd";
+		reg = <1>;
+		clocks = <&clk_can0>;
+		interrupts-extended = <&pio 1 1 IRQ_TYPE_LEVEL_LOW>;  /* PB1 */
+		spi-max-frequency = <20000000>;
+		vdd-supply = <&reg_vcc3v3>;
+		xceiver-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
index 9e13c2aa8911..fa54510319ac 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
@@ -411,11 +411,26 @@
 				function = "i2c1";
 			};
 
+			/omit-if-no-ref/
+			lcd_rgb666_pe_pins: lcd-rgb666-pe-pins {
+				pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13", "PE14", "PE15", "PE16", "PE17",
+				       "PE18", "PE19", "PE23", "PE24";
+				function = "lcd";
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB8", "PB9";
 				function = "uart0";
 			};
 
+			/omit-if-no-ref/
+			uart1_pe_pins: uart1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "uart1";
+			};
+
 			uart2_pins: uart2-pins {
 				pins = "PB0", "PB1";
 				function = "uart2";
@@ -646,7 +661,7 @@
 			reg = <0x01cb4000 0x3000>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_CSI>,
-				 <&ccu CLK_CSI1_SCLK>,
+				 <&ccu CLK_CSI_SCLK>,
 				 <&ccu CLK_DRAM_CSI>;
 			clock-names = "bus", "mod", "ram";
 			resets = <&ccu RST_BUS_CSI>;
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
index 43896723a994..472ded0aafcf 100644
--- a/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
@@ -62,6 +62,14 @@
 	status = "okay";
 };
 
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC", "Mic";
+	status = "okay";
+};
+
 &usb_otg {
 	dr_mode = "otg";
 	status = "okay";
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
index 3c61d59ab5f8..e4b41bc93852 100644
--- a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/clock/suniv-ccu-f1c100s.h>
 #include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+#include <dt-bindings/dma/sun4i-a10.h>
 
 / {
 	#address-cells = <1>;
@@ -159,6 +160,15 @@
 			status = "disabled";
 		};
 
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,suniv-f1c100s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <2>;
+		};
+
 		ccu: clock@1c20000 {
 			compatible = "allwinner,suniv-f1c100s-ccu";
 			reg = <0x01c20000 0x400>;
@@ -326,5 +336,19 @@
 			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
+
+		codec: codec@1c23c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,suniv-f1c100s-codec";
+			reg = <0x01c23c00 0x400>;
+			interrupts = <21>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 12>,
+			       <&dma SUN4I_DMA_NORMAL 12>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CODEC>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/amlogic/Makefile b/arch/arm/boot/dts/amlogic/Makefile
index 504c533b1173..3c8a1e88b386 100644
--- a/arch/arm/boot/dts/amlogic/Makefile
+++ b/arch/arm/boot/dts/amlogic/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_MACH_MESON8) += \
 	meson8-minix-neo-x8.dtb \
+	meson8-fernsehfee3.dtb \
 	meson8b-ec100.dtb \
 	meson8b-mxq.dtb \
 	meson8b-odroidc1.dtb \
diff --git a/arch/arm/boot/dts/amlogic/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi
index 8cb0fc78b2af..28ec2c821cdc 100644
--- a/arch/arm/boot/dts/amlogic/meson.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson.dtsi
@@ -255,8 +255,6 @@
 
 		usb0: usb@c9040000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc9040000 0x40000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb0_phy>;
@@ -270,8 +268,6 @@
 
 		usb1: usb@c90c0000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc90c0000 0x40000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb1_phy>;
diff --git a/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
new file mode 100644
index 000000000000..4e52447d51bd
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+// Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Fernsehfee 3.0";
+	compatible = "tcu,fernsehfee3", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+		gpiochip0 = &gpio;
+		gpiochip1 = &gpio_ao;
+		i2c0 = &i2c_AO;
+		i2c1 = &i2c_B;
+		mmc0 = &sdhc;
+		mmc1 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;  /* 1 GiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/*
+			 * The power LED can be turned red, otherwise it is green.
+			 */
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+
+	vcc_5v: regulator-5v {
+		/* 5V rail, always on as long as the system is running */
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-3v3 {
+		/* Chipown AP2420 step-down converter */
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+	};
+
+	wifi_3v3: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V-WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		gpio = <&gpio GPIOX_11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc1v8_usb: LDO3 {
+				regulator-name = "VCC1V8_USB";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			LDO4 {
+				/* This one appears to be unused */
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		/* Fairchild FM24C08A */
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+		wp-gpios = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		num-addresses = <4>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	/* TODO: SiI9293 HDMI receiver @ 0x39 */
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&sdhc {
+	status = "okay";
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	/* eMMC */
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&sd_b_pins>;
+
+	/* SD card */
+	slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		/* Realtek RTL8188 2.4GHz WiFi module */
+		compatible = "usbbda,179";
+		reg = <1>;
+		vdd-supply = <&wifi_3v3>;
+	};
+};
+
+&usb1_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi
index 9ff142d9fe3f..a609b5a0fda4 100644
--- a/arch/arm/boot/dts/amlogic/meson8.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -398,7 +398,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -449,7 +449,11 @@
 	};
 
 	pwm_ef: pwm@86c0 {
-		compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+		compatible = "amlogic,meson8-pwm-v2";
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
 		reg = <0x86c0 0x10>;
 		#pwm-cells = <3>;
 		status = "disabled";
@@ -477,6 +481,14 @@
 			gpio-ranges = <&pinctrl_cbus 0 0 120>;
 		};
 
+		i2c_b_pins: i2c-b {
+			mux {
+				groups = "i2c_sda_b", "i2c_sck_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
 		sd_a_pins: sd-a {
 			mux {
 				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
@@ -522,6 +534,16 @@
 			};
 		};
 
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					"sdxc_clk_c", "sdxc_cmd_c",
+					"sdxc_d47_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
 		spdif_out_pins: spdif-out {
 			mux {
 				groups = "spdif_out";
@@ -563,7 +585,7 @@
 				groups = "uart_tx_a1",
 				       "uart_rx_a1";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -699,11 +721,19 @@
 };
 
 &pwm_ab {
-	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &pwm_cd {
-	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/amlogic/meson8b-ec100.dts b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
index 18ea6592b7d7..236999548094 100644
--- a/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
@@ -443,8 +443,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/amlogic/meson8b-mxq.dts b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
index fb28cb330f17..0bca0b33eea2 100644
--- a/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
@@ -162,8 +162,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &uart_AO {
diff --git a/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
index 2aa012f38a3b..1cd2093202ca 100644
--- a/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
@@ -347,8 +347,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/amlogic/meson8b.dtsi b/arch/arm/boot/dts/amlogic/meson8b.dtsi
index 9e02a97f86a0..2d77b9876bf4 100644
--- a/arch/arm/boot/dts/amlogic/meson8b.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8b.dtsi
@@ -368,7 +368,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -403,8 +403,12 @@
 	};
 
 	pwm_ef: pwm@86c0 {
-		compatible = "amlogic,meson8b-pwm";
+		compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
 		reg = <0x86c0 0x10>;
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -517,7 +521,7 @@
 				groups = "uart_tx_b0",
 				       "uart_rx_b0";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -674,11 +678,19 @@
 };
 
 &pwm_ab {
-	compatible = "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &pwm_cd {
-	compatible = "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index c4f064e4b073..9adf9278dc94 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-amd-daytonax.dtb \
 	aspeed-bmc-amd-ethanolx.dtb \
 	aspeed-bmc-ampere-mtjade.dtb \
+	aspeed-bmc-ampere-mtjefferson.dtb \
 	aspeed-bmc-ampere-mtmitchell.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
@@ -18,21 +19,28 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-delta-ahe50dc.dtb \
 	aspeed-bmc-facebook-bletchley.dtb \
 	aspeed-bmc-facebook-catalina.dtb \
+	aspeed-bmc-facebook-clemente.dtb \
 	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-darwin.dtb \
 	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji-data64.dtb \
 	aspeed-bmc-facebook-fuji.dtb \
 	aspeed-bmc-facebook-galaxy100.dtb \
 	aspeed-bmc-facebook-greatlakes.dtb \
 	aspeed-bmc-facebook-harma.dtb \
 	aspeed-bmc-facebook-minerva.dtb \
 	aspeed-bmc-facebook-minipack.dtb \
+	aspeed-bmc-facebook-santabarbara.dtb \
 	aspeed-bmc-facebook-tiogapass.dtb \
 	aspeed-bmc-facebook-wedge40.dtb \
 	aspeed-bmc-facebook-wedge100.dtb \
+	aspeed-bmc-facebook-wedge400-data64.dtb \
 	aspeed-bmc-facebook-wedge400.dtb \
 	aspeed-bmc-facebook-yamp.dtb \
 	aspeed-bmc-facebook-yosemitev2.dtb \
 	aspeed-bmc-facebook-yosemite4.dtb \
+	aspeed-bmc-facebook-yosemite5.dtb \
+	aspeed-bmc-ibm-balcones.dtb \
 	aspeed-bmc-ibm-blueridge.dtb \
 	aspeed-bmc-ibm-bonnell.dtb \
 	aspeed-bmc-ibm-everest.dtb \
@@ -40,6 +48,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-ibm-rainier.dtb \
 	aspeed-bmc-ibm-rainier-1s4u.dtb \
 	aspeed-bmc-ibm-rainier-4u.dtb \
+	aspeed-bmc-ibm-sbp1.dtb \
 	aspeed-bmc-ibm-system1.dtb \
 	aspeed-bmc-intel-s2600wf.dtb \
 	aspeed-bmc-inspur-fp5280g2.dtb \
@@ -48,12 +57,12 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-nvidia-gb200nvl-bmc.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
 	aspeed-bmc-opp-mowgli.dtb \
 	aspeed-bmc-opp-nicole.dtb \
 	aspeed-bmc-opp-palmetto.dtb \
 	aspeed-bmc-opp-romulus.dtb \
-	aspeed-bmc-opp-swift.dtb \
 	aspeed-bmc-opp-tacoma.dtb \
 	aspeed-bmc-opp-vesnin.dtb \
 	aspeed-bmc-opp-witherspoon.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
index 31c5d319aa0a..263702599767 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
@@ -825,7 +825,7 @@
 		line-name = "ocp-aux-pwren";
 	};
 
-	bmc-ready {
+	bmc-ready-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
new file mode 100644
index 000000000000..53b4372f1a08
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2024 Ampere Computing LLC.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jefferson BMC";
+	compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c20 = &i2c4_bus70_chn0;
+		i2c22 = &i2c4_bus70_chn2;
+
+		/*
+		 *  I2C OCP alias port
+		 */
+		i2c30 = &ocpslot;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =   <&adc0 0>, <&adc0 1>, <&adc0 2>,
+				<&adc_i2c_2 0>, <&adc_i2c_2 1>,
+				<&adc_i2c_2 2>, <&adc_i2c_2 3>,
+				<&adc_i2c_2 4>, <&adc_i2c_2 5>,
+				<&adc_i2c_2 6>, <&adc_i2c_2 7>,
+				<&adc_i2c_2 8>, <&adc_i2c_2 9>,
+				<&adc_i2c_2 10>, <&adc_i2c_2 11>,
+				<&adc_i2c_2 12>, <&adc_i2c_2 13>,
+				<&adc_i2c_2 14>, <&adc_i2c_2 15>,
+				<&adc_i2c_0 0>, <&adc_i2c_0 1>,
+				<&adc_i2c_0 2>, <&adc_i2c_0 3>,
+				<&adc_i2c_0 4>, <&adc_i2c_0 5>,
+				<&adc_i2c_0 6>, <&adc_i2c_0 7>,
+				<&adc_i2c_0 8>, <&adc_i2c_0 9>,
+				<&adc_i2c_0 10>, <&adc_i2c_0 11>,
+				<&adc_i2c_0 12>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+			temperature-sensor@4a {
+				compatible = "ti,tmp75";
+				reg = <0x4a>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp464";
+				reg = <0x4b>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				channel@0 {
+					reg = <0x0>;
+					status = "disabled";
+				};
+				channel@1 {
+					reg = <0x1>;
+					status = "disabled";
+				};
+				channel@2 {
+					reg = <0x2>;
+					status = "disabled";
+				};
+				channel@3 {
+					reg = <0x3>;
+					status = "disabled";
+				};
+				channel@4 {
+					reg = <0x4>;
+				};
+			};
+			temperature-sensor@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+			temperature-sensor@28 {
+				compatible = "nuvoton,nct7802";
+				reg = <0x28>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel@1 { /* RTD1 */
+					reg = <1>;
+					sensor-type = "temperature";
+					temperature-mode = "thermistor";
+				};
+			};
+			adc_i2c_0: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			adc_i2c_2: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				ocpslot: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					ocpslot_temp: temperature-sensor@1f {
+						compatible = "ti,tmp421";
+						reg = <0x1f>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						channel@0 {
+							reg = <0x0>;
+							status = "disabled";
+						};
+						channel@1 {
+							reg = <0x1>;
+						};
+					};
+				};
+
+				nvmeslot_0: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_1: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_2: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_3: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	fan-controller@5c {
+		compatible = "onnn,adt7462";
+		reg = <0x5c>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+	temperature-sensor@18 {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	temperature-sensor@1a {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"presence-ocp1","presence-ocp2",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete",
+			"chassis-id-sel",
+	/*C0-C7*/	"s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel",
+			"spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","","","",
+	/*E0-E7*/	"eth-phy-rst-n","eth-phy-int-n","","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr",
+			"led-fp-sta-amb",
+	/*H0-H7*/	"jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","",
+			"","",
+	/*I0-I7*/	"","","","","","","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","reset-button","","","",
+	/*M0-M7*/	"nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock",
+			"","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n",
+			"led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify","","spi-nor-access","host0-ready","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","vrd-prg-en-n","","","","host0-special-boot",
+	/*Z0-Z7*/	"","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
index 0295f5adcfbc..2b336aa0146d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -677,6 +677,12 @@
 		#size-cells = <0>;
 		#gpio-cells = <2>;
 
+		gpio-line-names =
+		"ext-vref-sel","","presence-hdd-bp5-n","presence-hdd-bp6-n",
+		"","bmc-riser-en-n","bmc-ocp1-en-n","bmc-ocp0-en-n",
+		"","","","",
+		"","","","";
+
 		bmc-ocp0-en-hog {
 			gpio-hog;
 			gpios = <7 GPIO_ACTIVE_LOW>;
@@ -684,6 +690,16 @@
 			line-name = "bmc-ocp0-en-n";
 		};
 	};
+
+	fan-controller0@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	fan-controller1@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
 };
 
 &i2c9 {
@@ -958,7 +974,7 @@
 			"fan-fault","psu-fault",
 			"","",
 			"","",
-			"","",
+			"gpi0","gpi1",
 			"","",
 			"","",
 			"","",
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
index 29c68c37e7f5..b550a48f48f0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -171,7 +171,7 @@
 				reg = <0x50>;
 			};
 			dps650ab@58 {
-				compatible = "dps650ab";
+				compatible = "delta,dps650ab";
 				reg = <0x58>;
 			};
 		};
@@ -201,13 +201,13 @@
 };
 
 &gpio {
-	pin_gpio_c7 {
+	pin-gpio-c7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BIOS_SPI_MUX_S";
 	};
-	pin_gpio_d1 {
+	pin-gpio-d1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
index bb2e6ef609af..3ebd80db06f9 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
@@ -106,11 +106,15 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		eth0_macaddress: macaddress@3f80 {
-			reg = <0x3f80 6>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
 		};
 	};
 };
@@ -182,7 +186,7 @@
 			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
 
 	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
-	bmc-ready {
+	bmc-ready-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
index 9d00ce9475f2..8c57a071f488 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
@@ -191,11 +191,15 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		eth0_macaddress: macaddress@3f80 {
-			reg = <0x3f80 6>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
index 6dd221644dc6..e306655ce4a3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
@@ -134,11 +134,15 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x50>;
 		pagesize = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		eth0_macaddress: macaddress@3f80 {
-			reg = <0x3f80 6>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
index 0943e0bf1305..e61a6cb43438 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -232,15 +232,19 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		eth0_macaddress: macaddress@3f80 {
-			reg = <0x3f80 6>;
-		};
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
 
-		eth1_macaddress: macaddress@3f88 {
-			reg = <0x3f88 6>;
+			eth1_macaddress: macaddress@3f88 {
+				reg = <0x3f88 6>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
index 3f03a198a1a8..54a5509b04f1 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
@@ -915,14 +915,14 @@
 };
 
 &gpio {
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "NCSI_BMC_R_SEL";
 	};
 
-	pin_gpio_b6 {
+	pin-gpio-b6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
index b6bfdaea08e6..cce8d0416dc8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
@@ -395,7 +395,7 @@
 	 * back to one causes a power output glitch, so install a hog to keep
 	 * it at one as a failsafe to ensure nothing accidentally touches it.
 	 */
-	doom-guardrail {
+	doom-guardrail-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index 5be0e8fd2633..24969c82d05e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -52,10 +52,6 @@
 		};
 	};
 
-	switchphy: ethernet-phy@0 {
-		// Fixed link
-	};
-
 	front_gpio_leds {
 		compatible = "gpio-leds";
 		sys_log_id {
@@ -285,7 +281,6 @@
 &mac2 {
 	status = "okay";
 	phy-mode = "rgmii";
-	phy-handle = <&switchphy>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii3_default>;
 
@@ -398,10 +393,13 @@
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
 		};
 	};
 
@@ -484,10 +482,13 @@
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
 		};
 	};
 
@@ -570,10 +571,13 @@
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
 		};
 	};
 
@@ -656,10 +660,13 @@
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
 		};
 	};
 
@@ -742,10 +749,13 @@
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
 		};
 	};
 
@@ -828,10 +838,13 @@
 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
-			power-role = "source";
-			data-role = "host";
-			pd-disable;
-			typec-power-opmode = "default";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 82835e96317d..14dd0ab64130 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -50,14 +50,14 @@
 		i2c45 = &i2c0mux5ch1;
 		i2c46 = &i2c0mux5ch2;
 		i2c47 = &i2c0mux5ch3;
-		i2c48 = &i2c30mux0ch0;
-		i2c49 = &i2c30mux0ch1;
-		i2c50 = &i2c30mux0ch2;
-		i2c51 = &i2c30mux0ch3;
-		i2c52 = &i2c30mux0ch4;
-		i2c53 = &i2c30mux0ch5;
-		i2c54 = &i2c30mux0ch6;
-		i2c55 = &i2c30mux0ch7;
+		i2c48 = &i2c5mux0ch0;
+		i2c49 = &i2c5mux0ch1;
+		i2c50 = &i2c5mux0ch2;
+		i2c51 = &i2c5mux0ch3;
+		i2c52 = &i2c5mux0ch4;
+		i2c53 = &i2c5mux0ch5;
+		i2c54 = &i2c5mux0ch6;
+		i2c55 = &i2c5mux0ch7;
 	};
 
 	chosen {
@@ -153,6 +153,13 @@
 	status = "okay";
 };
 
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
 &mac3 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -179,6 +186,11 @@
 
 &i2c0 {
 	status = "okay";
+	multi-master;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
 
 	i2c-mux@71 {
 		compatible = "nxp,pca9546";
@@ -190,6 +202,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			mctp-controller;
+
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux0ch1: i2c@1 {
 			#address-cells = <1>;
@@ -200,6 +219,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+			mctp-controller;
+
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux0ch3: i2c@3 {
 			#address-cells = <1>;
@@ -213,6 +239,7 @@
 		reg = <0x72>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
 
 		i2c0mux1ch0: i2c@0 {
 			#address-cells = <1>;
@@ -242,79 +269,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			i2c-mux@70 {
-				compatible = "nxp,pca9548";
-				reg = <0x70>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				i2c30mux0ch0: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-				i2c30mux0ch1: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-				i2c30mux0ch2: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-				i2c30mux0ch3: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-				i2c30mux0ch4: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-				i2c30mux0ch5: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-				i2c30mux0ch6: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-					// HDD FRU EEPROM
-					eeprom@52 {
-						compatible = "atmel,24c64";
-						reg = <0x52>;
-					};
-				};
-				i2c30mux0ch7: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-
-					power-sensor@40 {
-						compatible = "ti,ina230";
-						reg = <0x40>;
-						shunt-resistor = <2000>;
-					};
-					power-sensor@41 {
-						compatible = "ti,ina230";
-						reg = <0x41>;
-						shunt-resistor = <2000>;
-					};
-					power-sensor@44 {
-						compatible = "ti,ina230";
-						reg = <0x44>;
-						shunt-resistor = <2000>;
-					};
-					power-sensor@45 {
-						compatible = "ti,ina230";
-						reg = <0x45>;
-						shunt-resistor = <2000>;
-					};
-				};
-			};
 		};
 		i2c0mux1ch3: i2c@3 {
 			#address-cells = <1>;
@@ -328,6 +282,7 @@
 		reg = <0x73>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
 
 		i2c0mux2ch0: i2c@0 {
 			#address-cells = <1>;
@@ -361,6 +316,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			mctp-controller;
+
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux3ch1: i2c@1 {
 			#address-cells = <1>;
@@ -371,6 +333,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+			mctp-controller;
+
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux3ch3: i2c@3 {
 			#address-cells = <1>;
@@ -384,6 +353,7 @@
 		reg = <0x76>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
 
 		i2c0mux4ch0: i2c@0 {
 			#address-cells = <1>;
@@ -426,6 +396,7 @@
 		reg = <0x77>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
 
 		i2c0mux5ch0: i2c@0 {
 			#address-cells = <1>;
@@ -464,40 +435,105 @@
 			#size-cells = <0>;
 			reg = <0x0>;
 
-			power-sensor@41 {
-				compatible = "ti,ina238";
-				reg = <0x41>;
-				shunt-resistor = <500>;
-			};
-			power-sensor@42 {
-				compatible = "ti,ina238";
-				reg = <0x42>;
-				shunt-resistor = <500>;
-			};
-			power-sensor@44 {
-				compatible = "ti,ina238";
-				reg = <0x44>;
-				shunt-resistor = <500>;
+			power-sensor@22 {
+				compatible = "mps,mp5990";
+				reg = <0x22>;
 			};
 		};
 		i2c1mux0ch1: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x1>;
-
-			power-sensor@41 {
-				compatible = "ti,ina238";
-				reg = <0x41>;
-			};
-			power-sensor@43 {
-				compatible = "ti,ina238";
-				reg = <0x43>;
-			};
 		};
 		i2c1mux0ch2: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x2>;
+
+			fanctl2: fan-controller@1 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x01>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl3: fan-controller@2 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x02>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl0: fan-controller@21 {
+				compatible = "maxim,max31790";
+				reg = <0x21>;
+			};
+			fanctl1: fan-controller@27 {
+				compatible = "maxim,max31790";
+				reg = <0x27>;
+			};
 		};
 		i2c1mux0ch3: i2c@3 {
 			#address-cells = <1>;
@@ -509,15 +545,23 @@
 			#size-cells = <0>;
 			reg = <0x4>;
 
+			power-monitor@13 {
+				compatible = "infineon,xdp710";
+				reg = <0x13>;
+			};
+			power-monitor@1c {
+				compatible = "infineon,xdp710";
+				reg = <0x1c>;
+			};
 			power-monitor@42 {
 				compatible = "lltc,ltc4287";
 				reg = <0x42>;
-				shunt-resistor-micro-ohms = <200>;
+				shunt-resistor-micro-ohms = <100>;
 			};
 			power-monitor@43 {
 				compatible = "lltc,ltc4287";
 				reg = <0x43>;
-				shunt-resistor-micro-ohms = <200>;
+				shunt-resistor-micro-ohms = <100>;
 			};
 		};
 		i2c1mux0ch5: i2c@5 {
@@ -580,6 +624,12 @@
 				compatible = "ti,tmp75";
 				reg = <0x4b>;
 			};
+
+			// FIO REMOTE TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
 		};
 	};
 };
@@ -593,8 +643,6 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	// Module 1 IOEXP
@@ -603,8 +651,6 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	// HMC IOEXP
@@ -613,8 +659,6 @@
 		reg = <0x27>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	// Module 0 EEPROM
@@ -640,6 +684,60 @@
 
 &i2c5 {
 	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c5mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c5mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c5mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		i2c5mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+		i2c5mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+		i2c5mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			// HDD FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+		i2c5mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
 };
 
 &i2c6 {
@@ -699,6 +797,12 @@
 
 &i2c10 {
 	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
 
 	// OCP NIC0 TEMP
 	temperature-sensor@1f {
@@ -724,16 +828,24 @@
 
 &i2c12 {
 	status = "okay";
+	multi-master;
 
 	// Module 1 FRU EEPROM
 	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
+
+	// Secondary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
 };
 
 &i2c13 {
 	status = "okay";
+	multi-master;
 
 	// Module 0 FRU EEPROM
 	eeprom@50 {
@@ -741,18 +853,12 @@
 		reg = <0x50>;
 	};
 
-	// Left CBC FRU EEPROM
+	// Primary CBC FRU EEPROM
 	eeprom@54 {
 		compatible = "atmel,24c02";
 		reg = <0x54>;
 	};
 
-	// Right CBC FRU EEPROM
-	eeprom@55 {
-		compatible = "atmel,24c02";
-		reg = <0x55>;
-	};
-
 	// HMC FRU EEPROM
 	eeprom@57 {
 		compatible = "atmel,24c02";
@@ -826,6 +932,12 @@
 
 &i2c15 {
 	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
 
 	// OCP NIC1 TEMP
 	temperature-sensor@1f {
@@ -834,9 +946,9 @@
 	};
 
 	// OCP NIC1 FRU EEPROM
-	eeprom@50 {
+	eeprom@52 {
 		compatible = "atmel,24c64";
-		reg = <0x50>;
+		reg = <0x52>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..450446913e36
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1290 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Clemente BMC";
+	compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c0mux0ch1mux0ch0;
+		i2c49 = &i2c0mux0ch1mux0ch1;
+		i2c50 = &i2c0mux0ch1mux0ch2;
+		i2c51 = &i2c0mux0ch1mux0ch3;
+		i2c52 = &i2c0mux3ch1mux0ch0;
+		i2c53 = &i2c0mux3ch1mux0ch1;
+		i2c54 = &i2c0mux3ch1mux0ch2;
+		i2c55 = &i2c0mux3ch1mux0ch3;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-hdd {
+			label = "hdd_led";
+			gpios = <&io_expander13 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>;
+		};
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"BMC_GPIOC0","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","BMC_GPIOD4","","","",
+	/*E0-E7*/	"BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"BMC_GPIOY4","BMC_GPIOY5","","",
+	/*Z0-Z7*/	"","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B3*/	"","","","",
+	/*18B4-18B7*/	"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane
+			i2c0mux0ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux0ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux0ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux0ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux0ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"RST_CX7_0",
+					"RST_CX7_1",
+					"CX0_SSD0_PRSNT_L",
+					"CX1_SSD1_PRSNT_L",
+					"CX_BOOT_CMPLT_CX0",
+					"CX_BOOT_CMPLT_CX1",
+					"CX_TWARN_CX0_L",
+					"CX_TWARN_CX1_L",
+					"CX_OVT_SHDN_CX0",
+					"CX_OVT_SHDN_CX1",
+					"FNP_L_CX0",
+					"FNP_L_CX1",
+					"",
+					"MCU_GPIO",
+					"MCU_RST_N",
+					"MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 0 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// E1.S Backplane HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane MUX
+			i2c0mux3ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux3ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux3ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux3ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux3ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"SEC_RST_CX7_0",
+					"SEC_RST_CX7_1",
+					"SEC_CX0_SSD0_PRSNT_L",
+					"SEC_CX1_SSD1_PRSNT_L",
+					"SEC_CX_BOOT_CMPLT_CX0",
+					"SEC_CX_BOOT_CMPLT_CX1",
+					"SEC_CX_TWARN_CX0_L",
+					"SEC_CX_TWARN_CX1_L",
+					"SEC_CX_OVT_SHDN_CX0",
+					"SEC_CX_OVT_SHDN_CX1",
+					"SEC_FNP_L_CX0",
+					"SEC_FNP_L_CX1",
+					"",
+					"SEC_MCU_GPIO",
+					"SEC_MCU_RST_N",
+					"SEC_MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 1 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	// PDB
+	power-monitor@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+		shunt-resistor-micro-ohms = <183>;
+	};
+
+	// PDB
+	power-monitor@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+		shunt-resistor-micro-ohms = <183>;
+	};
+
+	// Module 0
+	fanctl0: fan-controller@20{
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	// Module 0
+	fanctl1: fan-controller@23{
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	// Module 1
+	fanctl2: fan-controller@2c{
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	// Module 1
+	fanctl3: fan-controller@2f{
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+
+	// Module 0 Leak Sensor
+	adc@34 {
+		compatible = "maxim,max1363";
+		reg = <0x34>;
+	};
+
+	// Module 1 Leak Sensor
+	adc@35 {
+		compatible = "maxim,max1363";
+		reg = <0x35>;
+	};
+
+	// PDB TEMP SENSOR
+	temperature-sensor@4e {
+		compatible = "ti,tmp1075";
+		reg = <0x4e>;
+	};
+
+	// PDB FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	// PDB
+	vrm@60 {
+		compatible = "renesas,raa228004";
+		reg = <0x60>;
+	};
+
+	// PDB
+	vrm@61 {
+		compatible = "renesas,raa228004";
+		reg = <0x61>;
+	};
+
+	// Interposer
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// Interposer TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// Interposer FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+		};
+
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// Interposer IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"JTAG_MUX_SEL",
+					"IOX_BMC_RESET",
+					"RTC_CLR_L",
+					"RTC_U77_ALRT_N",
+					"",
+					"PSU_ALERT_N",
+					"",
+					"RST_P12V_STBY_N";
+			};
+		};
+
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Module 0, Expander @0x20
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB2_HUB_RST_L-O",
+			"",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L",
+			"SEC_FPGA_READY_BMC",
+			"SEC_HMC_BMC_DETECT",
+			"SEC_HMC_PGOOD",
+			"",
+			"SEC_BMC_SELF_POWER_CYCLE",
+			"SEC_SEC_FPGA_EROT_FATAL_ERROR_L",
+			"SEC_WP_HW_EXT_CTRL_L",
+			"SEC_EROT_FPGA_RST_L",
+			"SEC_FPGA_EROT_RECOVERY_L",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL",
+			"SEC_USB2_HUB_RST_L",
+			"",
+			"SEC_SGPIO_EN_L",
+			"SEC_IOB_IOEXP_INT_L",
+			"SEC_I2C_BUS_MUX_RESET_L";
+	};
+
+	// HMC Expander @0x27
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// Module 0 Aux EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 Aux EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RTC_MUX_SEL",
+			"PCI_MUX_SEL",
+			"TPM_MUX_SEL",
+			"FAN_MUX-SEL",
+			"SGMII_MUX_SEL",
+			"DP_MUX_SEL",
+			"UPHY3_USB_SEL",
+			"NCSI_MUX_SEL",
+			"BMC_PHY_RST",
+			"RTC_CLR_L",
+			"BMC_12V_CTRL",
+			"PS_RUN_IO0_PG",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+	// SCM TEMP SENSOR BOARD
+	temperature-sensor@4b {
+		compatible = "national,lm75b";
+		reg = <0x4b>;
+	};
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"stby_power_en_cpld",
+			"stby_power_gd_cpld",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// HPM 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+	// CBC 2 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+	// CBC 3 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// HPM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// CBC 0 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// CBC 1 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"wSequence_Latch_State_N",
+			"wP12V_N1N2_RUNTIME_FLT_N",
+			"wP12V_FAN_RUNTIME_FLT_N",
+			"wP12V_AUX_RUNTIME_FLT_N",
+			"wHost_PERST_SEQPWR_FLT_N",
+			"wP12V_N1N2_SEQPWR_FLT_N",
+			"wP12V_FAN_SEQPWR_FLT_N",
+			"wP12V_AUX_SEQPWR_FLT_N",
+			"wP12V_RUNTIME_FLT_NIC1_N",
+			"wAUX_RUNTIME_FLT_NIC1_N",
+			"wP12V_SEQPWR_FLT_NIC1_N",
+			"wAUX_SEQPWR_FLT_NIC1_N",
+			"wP12V_RUNTIME_FLT_NIC0_N",
+			"wAUX_RUNTIME_FLT_NIC0_N",
+			"wP12V_SEQPWR_FLT_NIC0_N",
+			"wAUX_SEQPWR_FLT_NIC0_N";
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FM_P12V_NIC1_FLTB_R_N",
+			"FM_P3V3_NIC1_FAULT_R_N",
+			"FM_P12V_NIC0_FLTB_R_N",
+			"FM_P3V3_NIC0_FAULT_R_N",
+			"P48V_HS2_FAULT_N_PLD",
+			"P48V_HS1_FAULT_N_PLD",
+			"P12V_AUX_FAN_OC_PLD_N",
+			"P12V_AUX_FAN_FAULT_PLD_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"FM_SYS_THROTTLE_N",
+			"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+			"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_AUX_PSU_SMB_ALERT_R_L",
+			"P12V_SCM_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+			"NODEB_PSU_SMB_ALERT_R_L",
+			"NODEA_PSU_SMB_ALERT_R_L",
+			"P12V_AUX_FAN_ALERT_PLD_N",
+			"P52V_SENSE_ALERT_PLD_N",
+			"PRSNT_RJ45_FIO_N_R",
+			"FM_MAIN_PWREN_RMC_EN_ISO_R",
+			"CHASSIS3_LEAK_Q_N_PLD",
+			"CHASSIS2_LEAK_Q_N_PLD",
+			"CHASSIS1_LEAK_Q_N_PLD",
+			"CHASSIS0_LEAK_Q_N_PLD",
+			"",
+			"SMB_RJ45_FIO_TMP_ALERT";
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FAN_7_PRESENT_N",
+			"FAN_6_PRESENT_N",
+			"FAN_5_PRESENT_N",
+			"FAN_4_PRESENT_N",
+			"FAN_3_PRESENT_N",
+			"FAN_2_PRESENT_N",
+			"FAN_1_PRESENT_N",
+			"FAN_0_PRESENT_N",
+			"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N",
+			"HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+			"PRSNT_HDDBD_POWER_CABLE_N",
+			"PRSNT_OSFP0_POWER_CABLE_N",
+			"PRSNT_CHASSIS3_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"rmc_en_dc_pwr_on",
+			"HDD_LED_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"leak_config_0",
+			"leak_config_1",
+			"leak_config_2",
+			"leak_config_3",
+			"mfg_led_test_mode_l",
+			"small_leak_err_inj",
+			"large_leak_err_inj",
+			"";
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&udma {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
new file mode 100644
index 000000000000..58c107a1b6cf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Darwin BMC";
+	compatible = "facebook,darwin-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		     &pinctrl_adc2_default &pinctrl_adc3_default
+		     &pinctrl_adc4_default &pinctrl_adc5_default
+		     &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		     &pinctrl_adc10_default &pinctrl_adc11_default
+		     &pinctrl_adc12_default &pinctrl_adc13_default
+		     &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
index 74f3c67e0eff..ff1009ea1c49 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -201,3 +201,15 @@
 		full-duplex;
 	};
 };
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
new file mode 100644
index 000000000000..48ca25f57ef6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
@@ -0,0 +1,1270 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC (64MB Datastore)";
+	compatible = "facebook,fuji-data64-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
+
+/*
+ * FIXME: rgmii delay is introduced by MAC (configured in u-boot now)
+ * instead of PCB on fuji board, so the "phy-mode" should be updated to
+ * "rgmii-[tx|rx]id" when the aspeed-mac driver can handle the delay
+ * properly.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
index f23c26a3441d..5dc2a165e441 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -1,1251 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0+
 // Copyright (c) 2020 Facebook Inc.
 
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
+#include "aspeed-bmc-facebook-fuji-data64.dts"
 
 / {
 	model = "Facebook Fuji BMC";
 	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
-
-	aliases {
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (11-0077) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-
-		/*
-		 * PCA9548 (24-0071) provides 8 channels connecting to
-		 * PDB-Left.
-		 */
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-
-		/*
-		 * PCA9548 (25-0072) provides 8 channels connecting to
-		 * PDB-Right.
-		 */
-		i2c56 = &imux56;
-		i2c57 = &imux57;
-		i2c58 = &imux58;
-		i2c59 = &imux59;
-		i2c60 = &imux60;
-		i2c61 = &imux61;
-		i2c62 = &imux62;
-		i2c63 = &imux63;
-
-		/*
-		 * PCA9548 (26-0076) provides 8 channels connecting to
-		 * FCM1.
-		 */
-		i2c64 = &imux64;
-		i2c65 = &imux65;
-		i2c66 = &imux66;
-		i2c67 = &imux67;
-		i2c68 = &imux68;
-		i2c69 = &imux69;
-		i2c70 = &imux70;
-		i2c71 = &imux71;
-
-		/*
-		 * PCA9548 (27-0076) provides 8 channels connecting to
-		 * FCM2.
-		 */
-		i2c72 = &imux72;
-		i2c73 = &imux73;
-		i2c74 = &imux74;
-		i2c75 = &imux75;
-		i2c76 = &imux76;
-		i2c77 = &imux77;
-		i2c78 = &imux78;
-		i2c79 = &imux79;
-
-		/*
-		 * PCA9548 (40-0076) provides 8 channels connecting to
-		 * PIM1.
-		 */
-		i2c80 = &imux80;
-		i2c81 = &imux81;
-		i2c82 = &imux82;
-		i2c83 = &imux83;
-		i2c84 = &imux84;
-		i2c85 = &imux85;
-		i2c86 = &imux86;
-		i2c87 = &imux87;
-
-		/*
-		 * PCA9548 (41-0076) provides 8 channels connecting to
-		 * PIM2.
-		 */
-		i2c88 = &imux88;
-		i2c89 = &imux89;
-		i2c90 = &imux90;
-		i2c91 = &imux91;
-		i2c92 = &imux92;
-		i2c93 = &imux93;
-		i2c94 = &imux94;
-		i2c95 = &imux95;
-
-		/*
-		 * PCA9548 (42-0076) provides 8 channels connecting to
-		 * PIM3.
-		 */
-		i2c96 = &imux96;
-		i2c97 = &imux97;
-		i2c98 = &imux98;
-		i2c99 = &imux99;
-		i2c100 = &imux100;
-		i2c101 = &imux101;
-		i2c102 = &imux102;
-		i2c103 = &imux103;
-
-		/*
-		 * PCA9548 (43-0076) provides 8 channels connecting to
-		 * PIM4.
-		 */
-		i2c104 = &imux104;
-		i2c105 = &imux105;
-		i2c106 = &imux106;
-		i2c107 = &imux107;
-		i2c108 = &imux108;
-		i2c109 = &imux109;
-		i2c110 = &imux110;
-		i2c111 = &imux111;
-
-		/*
-		 * PCA9548 (44-0076) provides 8 channels connecting to
-		 * PIM5.
-		 */
-		i2c112 = &imux112;
-		i2c113 = &imux113;
-		i2c114 = &imux114;
-		i2c115 = &imux115;
-		i2c116 = &imux116;
-		i2c117 = &imux117;
-		i2c118 = &imux118;
-		i2c119 = &imux119;
-
-		/*
-		 * PCA9548 (45-0076) provides 8 channels connecting to
-		 * PIM6.
-		 */
-		i2c120 = &imux120;
-		i2c121 = &imux121;
-		i2c122 = &imux122;
-		i2c123 = &imux123;
-		i2c124 = &imux124;
-		i2c125 = &imux125;
-		i2c126 = &imux126;
-		i2c127 = &imux127;
-
-		/*
-		 * PCA9548 (46-0076) provides 8 channels connecting to
-		 * PIM7.
-		 */
-		i2c128 = &imux128;
-		i2c129 = &imux129;
-		i2c130 = &imux130;
-		i2c131 = &imux131;
-		i2c132 = &imux132;
-		i2c133 = &imux133;
-		i2c134 = &imux134;
-		i2c135 = &imux135;
-
-		/*
-		 * PCA9548 (47-0076) provides 8 channels connecting to
-		 * PIM8.
-		 */
-		i2c136 = &imux136;
-		i2c137 = &imux137;
-		i2c138 = &imux138;
-		i2c139 = &imux139;
-		i2c140 = &imux140;
-		i2c141 = &imux141;
-		i2c142 = &imux142;
-		i2c143 = &imux143;
-	};
-
-	spi_gpio: spi {
-		num-chipselects = <3>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
-			   <0>,	/* device reg=<1> does not exist */
-			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
-
-		eeprom@2 {
-			compatible = "atmel,at93c46d";
-			spi-max-frequency = <250000>;
-			data-size = <16>;
-			spi-cs-high;
-			reg = <2>;
-		};
-	};
 };
 
-&i2c0 {
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c2 {
-	/*
-	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
-	 * Controller Module).
-	 */
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adm1278@10 {
-				compatible = "adi,adm1278";
-				reg = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				shunt-resistor-micro-ohms = <1500>;
-			};
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c8 {
-	/*
-	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-mux@71 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x71>;
-				i2c-mux-idle-disconnect;
-
-				imux48: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux49: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux50: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-
-					lp5012@14 {
-						compatible = "ti,lp5012";
-						reg = <0x14>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						multi-led@0 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <0>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "sys";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@1 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <1>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "fan";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@2 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <2>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "psu";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@3 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <3>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "smb";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-					};
-				};
-
-				imux51: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux52: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux53: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux54: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux55: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-mux@72 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72>;
-				i2c-mux-idle-disconnect;
-
-				imux56: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux57: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux58: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux59: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux60: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux61: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux62: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux63: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux64: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux65: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux66: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux67: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					adm1278@10 {
-						compatible = "adi,adm1278";
-						reg = <0x10>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						shunt-resistor-micro-ohms = <250>;
-					};
-				};
-
-				imux68: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux69: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux70: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux71: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux72: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux73: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux74: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux75: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					adm1278@10 {
-						compatible = "adi,adm1278";
-						reg = <0x10>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						shunt-resistor-micro-ohms = <250>;
-					};
-				};
-
-				imux76: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux77: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux78: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux79: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
 	};
 };
-
-&i2c11 {
-	status = "okay";
-
-	/*
-	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-mux@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux80: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux81: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux82: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux83: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux84: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux85: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux86: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux87: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux88: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux89: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux90: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux91: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux92: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux93: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux94: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux95: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux96: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux97: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux98: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux99: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux100: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux101: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux102: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux103: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux104: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux105: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux106: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux107: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux108: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux109: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux110: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux111: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux112: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux113: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux114: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux115: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux116: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux117: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux118: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux119: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux120: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux121: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux122: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux123: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux124: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux125: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux126: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux127: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux128: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux129: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux130: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux131: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux132: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux133: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux134: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux135: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux136: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux137: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux138: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux139: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux140: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux141: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux142: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux143: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&mdio1 {
-	status = "okay";
-
-	ethphy3: ethernet-phy@13 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0d>;
-	};
-};
-
-&mac3 {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index cf3f807a38fe..1c50e4a367b2 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -135,10 +135,6 @@
 	use-ncsi;
 };
 
-&rtc {
-	status = "okay";
-};
-
 &fmc {
 	status = "okay";
 
@@ -187,11 +183,9 @@
 &i2c0 {
 	status = "okay";
 
-	pwm@5e{
-		compatible = "max31790";
+	pwm@5e {
+		compatible = "maxim,max31790";
 		reg = <0x5e>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 	};
 
 	power-sensor@40 {
@@ -222,11 +216,38 @@
 		compatible = "ti,tmp75";
 		reg = <0x4b>;
 	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb2-activate",
+		"","";
+	};
 };
 
 &i2c1 {
 	status = "okay";
 
+	mctp-controller;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
 	temperature-sensor@4b {
 		compatible = "ti,tmp75";
 		reg = <0x4b>;
@@ -242,11 +263,9 @@
 &i2c2 {
 	status = "okay";
 
-	pwm@5e{
-		compatible = "max31790";
+	pwm@5e {
+		compatible = "maxim,max31790";
 		reg = <0x5e>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 	};
 
 	power-sensor@40 {
@@ -277,6 +296,25 @@
 		compatible = "ti,tmp75";
 		reg = <0x4b>;
 	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb1-activate",
+		"","";
+	};
 };
 
 &i2c3 {
@@ -339,6 +377,12 @@
 		compatible = "infineon,xdp710";
 		reg = <0x40>;
 	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <500>;
+	};
 };
 
 &i2c5 {
@@ -358,11 +402,22 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
 		};
 		imux23: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
 		};
 	};
 };
@@ -397,12 +452,6 @@
 		reg = <0x31>;
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"","","","",
-		"","","presence-cmm","",
-		"","","","",
-		"","","","";
 	};
 
 	// PTTV FRU
@@ -415,6 +464,25 @@
 &i2c11 {
 	status = "okay";
 
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <222 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","health-mmc",
+		"","",
+		"","",
+		"","",
+		"","";
+	};
+
 	gpio@30 {
 		compatible = "nxp,pca9555";
 		reg = <0x30>;
@@ -426,12 +494,6 @@
 		reg = <0x31>;
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"","","","",
-		"","","presence-cmm","",
-		"","","","",
-		"","","","";
 	};
 
 	// Aegis FRU
@@ -462,6 +524,10 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			power-sensor@20 {
+				compatible = "mps,mp5990";
+				reg = <0x20>;
+			};
 			power-monitor@61 {
 				compatible = "isil,isl69260";
 				reg = <0x61>;
@@ -496,6 +562,19 @@
 				compatible = "atmel,24c64";
 				reg = <0x54>;
 			};
+
+			adc@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
 		};
 		imux30: i2c@2 {
 			#address-cells = <1>;
@@ -506,6 +585,11 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
 		};
 	};
 };
@@ -565,7 +649,7 @@
 	/*B0-B7*/	"","","","",
 			"bmc-spi-mux-select-0","led-identify","","",
 	/*C0-C7*/	"reset-cause-platrst","","","","",
-			"cpu0-err-alert","","",
+			"power-hsc-good","power-chassis-good","",
 	/*D0-D7*/	"","","sol-uart-select","","","","","",
 	/*E0-E7*/	"","","","","","","","",
 	/*F0-F7*/	"","","","","","","","",
@@ -584,14 +668,16 @@
 	/*O0-O7*/	"","","","","","","","",
 	/*P0-P7*/	"power-button","power-host-control",
 			"reset-button","","led-power","","","",
-	/*Q0-Q7*/	"","","","","","power-chassis-control","","",
+	/*Q0-Q7*/
+			"","","","",
+			"","power-chassis-control","","uart-switch-button",
 	/*R0-R7*/	"","","","","","","","",
 	/*S0-S7*/	"","","","","","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","led-identify-gate","",
 	/*V0-V7*/	"","","","",
-			"rtc-battery-voltage-read-enable","",
-			"power-chassis-good","",
+			"","",
+			"","",
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
@@ -620,14 +706,14 @@
 	"","",
 	/*A4-A7 line 8-15*/
 	"","power-config-asic-module-enable",
-	"","power-config-asic-power-good",
-	"","power-config-pdb-power-good",
+	"power-p3v3-standby","power-config-asic-power-good",
+	"power-p1v8-good","power-config-pdb-power-good",
 	"presence-cpu","smi-control-n",
 	/*B0-B3 line 16-23*/
 	"","nmi-control-n",
-	"","nmi-control-sync-flood-n",
-	"","",
+	"power-pvdd33-s5","nmi-control-sync-flood-n",
 	"","",
+	"power-pvdd18-s5","",
 	/*B4-B7 line 24-31*/
 	"","FM_CPU_SP5R1",
 	"reset-cause-rsmrst","FM_CPU_SP5R2",
@@ -671,11 +757,11 @@
 	/*F4-F7 line 88-95*/
 	"presence-asic-modules-0","rt-cpu0-p1-force-enable",
 	"presence-asic-modules-1","bios-debug-msg-disable",
-	"","uart-control-buffer-select",
-	"","ac-control-n",
+	"power-asic-good","uart-control-buffer-select",
+	"presence-cmm","ac-control-n",
 	/*G0-G3 line 96-103*/
 	"FM_CPU_CORETYPE2","",
-	"FM_CPU_CORETYPE1","",
+	"FM_CPU_CORETYPE1","rtc-battery-voltage-read-enable",
 	"FM_CPU_CORETYPE0","",
 	"FM_BOARD_REV_ID5","",
 	/*G4-G7 line 104-111*/
@@ -684,7 +770,7 @@
 	"FM_BOARD_REV_ID2","",
 	"FM_BOARD_REV_ID1","",
 	/*H0-H3 line 112-119*/
-	"FM_BOARD_REV_ID0","",
+	"FM_BOARD_REV_ID0","reset-control-cmos-clear",
 	"","","","","","",
 	/*H4-H7 line 120-127*/
 	"","",
@@ -699,7 +785,7 @@
 	/*I4-I7 line 136-143*/
 	"","","","","","","","",
 	/*J0-J3 line 144-151*/
-	"","","","","","","","",
+	"","","power-card-enable","","","","","",
 	/*J4-J7 line 152-159*/
 	"SLOT_ID_BCB_0","",
 	"SLOT_ID_BCB_1","",
@@ -715,9 +801,15 @@
 	"cpu0-thermtrip-alert","",
 	"reset-cause-pcie","",
 	/*L4-L7 line 184-191*/
-	"pvdd11-ocp-alert","","","","","","","",
+	"pvdd11-ocp-alert","",
+	"power-fault-n","",
+	"asic0-card-type-detection0-n","",
+	"asic0-card-type-detection1-n","",
 	/*M0-M3 line 192-199*/
-	"","","","","","","","",
+	"asic0-card-type-detection2-n","",
+	"uart-switch-lsb","",
+	"uart-switch-msb","",
+	"power-12v-memory-good","",
 	/*M4-M7 line 200-207*/
 	"","","","","","","","",
 	/*N0-N3 line 208-215*/
@@ -725,7 +817,10 @@
 	/*N4-N7 line 216-223*/
 	"","","","","","","","",
 	/*O0-O3 line 224-231*/
-	"","","","","","","","",
+	"","",
+	"irq-pvddcore0-ocp-alert","",
+	"irq-pvddcore1-ocp-alert","",
+	"","",
 	/*O4-O7 line 232-239*/
 	"","","","","","","","",
 	/*P0-P3 line 240-247*/
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
index 41e2246cfbd1..eb8d4b95596c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -23,6 +23,32 @@
 		i2c19 = &imux19;
 		i2c20 = &imux20;
 		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
 
 		spi1 = &spi_gpio;
 	};
@@ -75,6 +101,11 @@
 			gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
+
+		led-5 {
+			label = "bmc_ready_noled";
+			gpios = <&sgpiom0 141 (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
 	};
 
 	spi_gpio: spi {
@@ -182,6 +213,63 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	gpio@11 {
+		compatible = "nxp,pca9555";
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <238 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"PWRGD_P24V_SMPWROK", "P1V5_PWROK",
+		"P3V3_PWROK", "P5V_PWROK",
+		"P12V_SCM_PWROK", "P12V_PWROK",
+		"P24V_PWROK", "P48V_HSC_PWROK",
+		"ERR_GPIO_IRQ", "TMP75_ALERT_N",
+		"BMC_PWROK", "P12V_INA230_ALERT_N",
+		"P24V_INA230_ALERT_N","",
+		"P48V_HSC_ALERT_N", "P1V05_PWROK";
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <240 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"P1V05_PWR_FAIL", "P1V5_PWR_FAIL",
+		"P24V_PWR_FAIL", "P24V_SM_PWR_FAIL",
+		"IRQ_NW0/1/2_N", "IRQ_NW3/4/5_N",
+		"RTC_INT_N_R", "ERR_GPIO_IRQ",
+		"", "",
+		"", "",
+		"", "",
+		"", "";
+	};
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <242 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"", "",
+		"", "",
+		"", "",
+		"", "",
+		"RACKMON_A_1", "RACKMON_A_2",
+		"RACKMON_B_1", "RACKMON_B_2",
+		"", "",
+		"", "";
+	};
 };
 
 &i2c1 {
@@ -213,21 +301,20 @@
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
 
-		imux16: i2c@0 {
+		// FCB 1
+		imux16: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0>;
+			reg = <1>;
 
 			eeprom@50 {
 				compatible = "atmel,24c128";
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -258,23 +345,97 @@
 				compatible = "ti,tmp75";
 				reg = <0x4b>;
 			};
-		};
 
-		imux17: i2c@1 {
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R",
+				"P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R",
+				"FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R",
+				"FCB_1_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N",
+				"INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N",
+				"FCB_1_TMP75_ALERT_N", "",
+				"", "",
+				"FAN1_PRSNT", "FAN2_PRSNT",
+				"FAN3_PRSNT", "FAN4_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT",
+				"FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT",
+				"FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT",
+				"FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL",
+				"FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL",
+				"FAN2_POWER_FAIL", "FAN3_POWER_FAIL",
+				"FAN4_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 2
+		imux17: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <1>;
+			reg = <0>;
 
 			eeprom@50 {
 				compatible = "atmel,24c128";
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -305,23 +466,97 @@
 				compatible = "ti,tmp75";
 				reg = <0x4b>;
 			};
-		};
 
-		imux18: i2c@2 {
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R",
+				"P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R",
+				"FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R",
+				"FCB_2_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N",
+				"INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N",
+				"FCB_2_TMP75_ALERT_N", "",
+				"", "",
+				"FAN5_PRSNT", "FAN6_PRSNT",
+				"FAN7_PRSNT", "FAN8_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT",
+				"FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT",
+				"FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT",
+				"FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL",
+				"FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL",
+				"FAN6_POWER_FAIL", "FAN7_POWER_FAIL",
+				"FAN8_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 3
+		imux18: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <2>;
+			reg = <3>;
 
 			eeprom@50 {
 				compatible = "atmel,24c128";
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -352,23 +587,97 @@
 				compatible = "ti,tmp75";
 				reg = <0x4b>;
 			};
-		};
 
-		imux19: i2c@3 {
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R",
+				"P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R",
+				"FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R",
+				"FCB_3_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N",
+				"INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N",
+				"FCB_3_TMP75_ALERT_N", "",
+				"", "",
+				"FAN9_PRSNT", "FAN10_PRSNT",
+				"FAN11_PRSNT", "FAN12_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT",
+				"FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT",
+				"FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT",
+				"FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL",
+				"FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL",
+				"FAN10_POWER_FAIL", "FAN11_POWER_FAIL",
+				"FAN12_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 4
+		imux19: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <3>;
+			reg = <2>;
 
 			eeprom@50 {
 				compatible = "atmel,24c128";
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -399,9 +708,85 @@
 				compatible = "ti,tmp75";
 				reg = <0x4b>;
 			};
-		};
 
-		imux20: i2c@5 {
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R",
+				"P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R",
+				"FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R",
+				"FCB_4_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N",
+				"INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N",
+				"FCB_4_TMP75_ALERT_N", "",
+				"", "",
+				"FAN13_PRSNT", "FAN14_PRSNT",
+				"FAN15_PRSNT", "FAN16_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT",
+				"FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT",
+				"FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT",
+				"FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL",
+				"FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL",
+				"FAN14_POWER_FAIL", "FAN15_POWER_FAIL",
+				"FAN16_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 5
+		imux20: i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
@@ -411,11 +796,9 @@
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -445,9 +828,85 @@
 				compatible = "ti,tmp75";
 				reg = <0x4b>;
 			};
-		};
 
-		imux21: i2c@4 {
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R",
+				"P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R",
+				"FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R",
+				"FCB_5_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N",
+				"INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N",
+				"FCB_5_TMP75_ALERT_N", "",
+				"", "",
+				"FAN20_PRSNT", "FAN19_PRSNT",
+				"FAN18_PRSNT", "FAN17_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT",
+				"FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT",
+				"FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT",
+				"FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL",
+				"FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL",
+				"FAN19_POWER_FAIL", "FAN18_POWER_FAIL",
+				"FAN17_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 6
+		imux21: i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
@@ -457,11 +916,9 @@
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -491,24 +948,316 @@
 				compatible = "ti,tmp75";
 				reg = <0x4b>;
 			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R",
+				"P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R",
+				"FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R",
+				"FCB_6_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N",
+				"INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N",
+				"FCB_6_TMP75_ALERT_N", "",
+				"", "",
+				"FAN24_PRSNT", "FAN23_PRSNT",
+				"FAN22_PRSNT", "FAN21_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT",
+				"FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT",
+				"FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT",
+				"FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL",
+				"FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL",
+				"FAN23_POWER_FAIL", "FAN22_POWER_FAIL",
+				"FAN21_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
 		};
 	};
 };
 
 &i2c3 {
 	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
 };
 
 &i2c4 {
 	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
 };
 
 &i2c5 {
 	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
 };
 
 &i2c6 {
 	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
 };
 
 &i2c7 {
@@ -531,14 +1280,111 @@
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
 };
 
 &i2c12 {
 	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
 };
 
 &i2c13 {
 	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux44: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux45: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux46: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux47: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
 };
 
 &i2c14 {
@@ -627,7 +1473,6 @@
 	gpio-line-names =
 	/*"input pin","output pin"*/
 	/*A0 - A7*/
-	"PRSNT_MTIA_BLADE0_N","PWREN_MTIA_BLADE0_EN_N",
 	"PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N",
 	"PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N",
 	"PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N",
@@ -635,8 +1480,8 @@
 	"PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N",
 	"PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N",
 	"PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N",
-	/*B0 - B7*/
 	"PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N",
+	/*B0 - B7*/
 	"PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N",
 	"PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N",
 	"PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N",
@@ -644,80 +1489,80 @@
 	"PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N",
 	"PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N",
 	"PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N",
+	"PRSNT_MTIA_BLADE16_N","PWREN_MTIA_BLADE16_EN_N",
 	/*C0 - C7*/
-	"PRSNT_NW_BLADE0_N","PWREN_NW_BLADE0_EN_N",
 	"PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N",
 	"PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N",
 	"PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N",
 	"PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N",
 	"PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N",
-	"PRSNT_FCB_TOP_0_N","PWREN_MTIA_BLADE0_HSC_EN_N",
-	"PRSNT_FCB_TOP_1_N","PWREN_MTIA_BLADE1_HSC_EN_N",
+	"PRSNT_NW_BLADE6_N","PWREN_NW_BLADE6_EN_N",
+	"PRSNT_FCB_1_N","PWREN_MTIA_BLADE1_HSC_EN_N",
+	"PRSNT_FCB_2_N","PWREN_MTIA_BLADE2_HSC_EN_N",
 	/*D0 - D7*/
-	"PRSNT_FCB_MIDDLE_0_N","PWREN_MTIA_BLADE2_HSC_EN_N",
-	"PRSNT_FCB_MIDDLE_1_N","PWREN_MTIA_BLADE3_HSC_EN_N",
-	"PRSNT_FCB_BOTTOM_1_N","PWREN_MTIA_BLADE4_HSC_EN_N",
-	"PRSNT_FCB_BOTTOM_0_N","PWREN_MTIA_BLADE5_HSC_EN_N",
-	"PWRGD_MTIA_BLADE0_PWROK_N","PWREN_MTIA_BLADE6_HSC_EN_N",
+	"PRSNT_FCB_3_N","PWREN_MTIA_BLADE3_HSC_EN_N",
+	"PRSNT_FCB_4_N","PWREN_MTIA_BLADE4_HSC_EN_N",
+	"PRSNT_FCB_6_N","PWREN_MTIA_BLADE5_HSC_EN_N",
+	"PRSNT_FCB_5_N","PWREN_MTIA_BLADE6_HSC_EN_N",
 	"PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N",
 	"PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N",
 	"PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N",
-	/*E0 - E7*/
 	"PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N",
+	/*E0 - E7*/
 	"PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N",
 	"PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N",
 	"PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N",
 	"PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N",
 	"PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N",
-	"PWRGD_MTIA_BLADE10_PWROK_N","PWREN_NW_BLADE0_HSC_EN_N",
+	"PWRGD_MTIA_BLADE10_PWROK_N","PWREN_MTIA_BLADE16_HSC_EN_N",
 	"PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N",
-	/*F0 - F7*/
 	"PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N",
+	/*F0 - F7*/
 	"PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N",
 	"PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N",
 	"PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N",
-	"PWRGD_NW_BLADE0_PWROK_N","PWREN_FCB_TOP_0_EN_N",
-	"PWRGD_NW_BLADE1_PWROK_N","PWREN_FCB_TOP_1_EN_N",
-	"PWRGD_NW_BLADE2_PWROK_N","PWREN_FCB_MIDDLE_0_EN_N",
-	"PWRGD_NW_BLADE3_PWROK_N","PWREN_FCB_MIDDLE_1_EN_N",
+	"PWRGD_MTIA_BLADE16_PWROK_N","PWREN_NW_BLADE6_HSC_EN_N",
+	"PWRGD_NW_BLADE1_PWROK_N","PWREN_SGPIO_FCB_2_EN_N",
+	"PWRGD_NW_BLADE2_PWROK_N","PWREN_SGPIO_FCB_1_EN_N",
+	"PWRGD_NW_BLADE3_PWROK_N","PWREN_SGPIO_FCB_4_EN_N",
+	"PWRGD_NW_BLADE4_PWROK_N","PWREN_SGPIO_FCB_3_EN_N",
 	/*G0 - G7*/
-	"PWRGD_NW_BLADE4_PWROK_N","PWREN_FCB_BOTTOM_1_EN_N",
-	"PWRGD_NW_BLADE5_PWROK_N","PWREN_FCB_BOTTOM_0_EN_N",
-	"PWRGD_FCB_TOP_0_PWROK_N","FM_CMM_AC_CYCLE_N",
-	"PWRGD_FCB_TOP_1_PWROK_N","MGMT_SFP_TX_DIS",
-	"PWRGD_FCB_MIDDLE_0_PWROK_N","FM_MDIO_SW_SEL",
-	"PWRGD_FCB_MIDDLE_1_PWROK_N","FM_P24V_SMPWR_EN",
-	"PWRGD_FCB_BOTTOM_1_PWROK_N","",
-	"PWRGD_FCB_BOTTOM_0_PWROK_N","",
+	"PWRGD_NW_BLADE5_PWROK_N","PWREN_SGPIO_FCB_5_EN_N",
+	"PWRGD_NW_BLADE6_PWROK_N","PWREN_SGPIO_FCB_6_EN_N",
+	"PWRGD_FCB_1","FM_BMC_RST_RTCRST_R",
+	"PWRGD_FCB_2","",
+	"PWRGD_FCB_3","FM_MDIO_SW_SEL",
+	"PWRGD_FCB_4","FM_P24V_SMPWR_EN",
+	"PWRGD_FCB_6","",
+	"PWRGD_FCB_5","",
 	/*H0 - H7*/
-	"LEAK_DETECT_MTIA_BLADE0_N","",
 	"LEAK_DETECT_MTIA_BLADE1_N","",
 	"LEAK_DETECT_MTIA_BLADE2_N","",
 	"LEAK_DETECT_MTIA_BLADE3_N","",
 	"LEAK_DETECT_MTIA_BLADE4_N","",
 	"LEAK_DETECT_MTIA_BLADE5_N","",
 	"LEAK_DETECT_MTIA_BLADE6_N","",
-	"LEAK_DETECT_MTIA_BLADE7_N","",
+	"LEAK_DETECT_MTIA_BLADE7_N","ERR_INJECT_CMM_PWR_FAIL_N",
+	"LEAK_DETECT_MTIA_BLADE8_N","",
 	/*I0 - I7*/
-	"LEAK_DETECT_MTIA_BLADE8_N","RST_I2CRST_FCB_BOTTOM_1_N",
-	"LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_BOTTOM_0_N",
-	"LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_MIDDLE_0_N",
-	"LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_MIDDLE_1_N",
-	"LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_TOP_0_N",
-	"LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_TOP_1_N",
-	"LEAK_DETECT_MTIA_BLADE14_N","BMC_READY",
-	"LEAK_DETECT_MTIA_BLADE15_N","FM_88E6393X_BIN_UPDATE_EN_N",
+	"LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_5_N",
+	"LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_6_N",
+	"LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_4_N",
+	"LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_3_N",
+	"LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_2_N",
+	"LEAK_DETECT_MTIA_BLADE14_N","RST_I2CRST_FCB_1_N",
+	"LEAK_DETECT_MTIA_BLADE15_N","BMC_READY",
+	"LEAK_DETECT_MTIA_BLADE16_N","FM_88E6393X_BIN_UPDATE_EN_N",
 	/*J0 - J7*/
-	"LEAK_DETECT_NW_BLADE0_N","WATER_VALVE_CLOSED_N",
-	"LEAK_DETECT_NW_BLADE1_N","",
+	"LEAK_DETECT_NW_BLADE1_N","WATER_VALVE_CLOSED_N",
 	"LEAK_DETECT_NW_BLADE2_N","",
 	"LEAK_DETECT_NW_BLADE3_N","",
 	"LEAK_DETECT_NW_BLADE4_N","",
 	"LEAK_DETECT_NW_BLADE5_N","",
-	"PWRGD_MTIA_BLADE0_HSC_PWROK_N","",
+	"LEAK_DETECT_NW_BLADE6_N","",
 	"PWRGD_MTIA_BLADE1_HSC_PWROK_N","",
-	/*K0 - K7*/
 	"PWRGD_MTIA_BLADE2_HSC_PWROK_N","",
+	/*K0 - K7*/
 	"PWRGD_MTIA_BLADE3_HSC_PWROK_N","",
 	"PWRGD_MTIA_BLADE4_HSC_PWROK_N","",
 	"PWRGD_MTIA_BLADE5_HSC_PWROK_N","",
@@ -725,49 +1570,50 @@
 	"PWRGD_MTIA_BLADE7_HSC_PWROK_N","",
 	"PWRGD_MTIA_BLADE8_HSC_PWROK_N","",
 	"PWRGD_MTIA_BLADE9_HSC_PWROK_N","",
-	/*L0 - L7*/
 	"PWRGD_MTIA_BLADE10_HSC_PWROK_N","",
+	/*L0 - L7*/
 	"PWRGD_MTIA_BLADE11_HSC_PWROK_N","",
 	"PWRGD_MTIA_BLADE12_HSC_PWROK_N","",
 	"PWRGD_MTIA_BLADE13_HSC_PWROK_N","",
 	"PWRGD_MTIA_BLADE14_HSC_PWROK_N","",
 	"PWRGD_MTIA_BLADE15_HSC_PWROK_N","",
-	"PWRGD_NW_BLADE0_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE16_HSC_PWROK_N","",
 	"PWRGD_NW_BLADE1_HSC_PWROK_N","",
-	/*M0 - M7*/
 	"PWRGD_NW_BLADE2_HSC_PWROK_N","",
+	/*M0 - M7*/
 	"PWRGD_NW_BLADE3_HSC_PWROK_N","",
 	"PWRGD_NW_BLADE4_HSC_PWROK_N","",
 	"PWRGD_NW_BLADE5_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE6_HSC_PWROK_N","",
 	"RPU_READY","",
 	"IT_GEAR_RPU_LINK_N","",
 	"IT_GEAR_LEAK","",
 	"WATER_VALVE_CLOSED_N","",
 	/*N0 - N7*/
-	"VALVE_STS0","",
-	"VALVE_STS1","",
-	"PCA9555_IRQ0_N","",
+	"VALVE_STATUS_0","",
+	"VALVE_STATUS_1","",
 	"PCA9555_IRQ1_N","",
+	"PCA9555_IRQ2_N","",
 	"CR_TOGGLE_BOOT_N","",
-	"IRQ_FCB_TOP0_N","",
-	"IRQ_FCB_TOP1_N","",
+	"IRQ_FCB_1_N","",
+	"IRQ_FCB_2_N","",
 	"CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","",
 	/*O0 - O7*/
 	"CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","",
 	"BOT_BCB_CABLE_PRSNT_N","",
 	"TOP_BCB_CABLE_PRSNT_N","",
-	"IRQ_FCB_MID0_N","",
-	"IRQ_FCB_MID1_N","",
+	"IRQ_FCB_3_N","",
+	"IRQ_FCB_4_N","",
 	"CHASSIS_LEAK0_DETECT_N","",
 	"CHASSIS_LEAK1_DETECT_N","",
-	"VALVE_RMON_A_1","",
+	"PCA9555_IRQ3_N","",
 	/*P0 - P7*/
-	"VALVE_RMON_A_2","",
-	"VALVE_RMON_B_1","",
-	"VALVE_RMON_B_2","",
+	"PCA9555_IRQ4_N","",
+	"PCA9555_IRQ5_N","",
+	"CMM_AC_PWR_BTN_N","",
 	"RPU_READY_SPARE","",
 	"IT_GEAR_LEAK_SPARE","",
 	"IT_GEAR_RPU_LINK_SPARE_N","",
-	"IRQ_FCB_BOT0_N","",
-	"IRQ_FCB_BOT0_N","";
+	"IRQ_FCB_6_N","",
+	"IRQ_FCB_5_N","";
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
new file mode 100644
index 000000000000..f74f463cc878
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -0,0 +1,1889 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Santabarbara BMC";
+	compatible = "facebook,santabarbara-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c4mux0ch0;
+		i2c17 = &i2c4mux0ch1;
+		i2c18 = &i2c4mux0ch2;
+		i2c19 = &i2c4mux0ch3;
+		i2c20 = &i2c4mux0ch4;
+		i2c21 = &i2c4mux0ch5;
+		i2c22 = &i2c4mux0ch6;
+		i2c23 = &i2c4mux0ch7;
+		i2c24 = &i2c5mux0ch0;
+		i2c25 = &i2c5mux0ch1;
+		i2c26 = &i2c5mux0ch2;
+		i2c27 = &i2c5mux0ch3;
+		i2c28 = &i2c5mux1ch0;
+		i2c29 = &i2c5mux1ch1;
+		i2c30 = &i2c5mux1ch2;
+		i2c31 = &i2c5mux1ch3;
+		i2c32 = &i2c12mux0ch0;
+		i2c33 = &i2c12mux0ch1;
+		i2c34 = &i2c12mux0ch2;
+		i2c35 = &i2c12mux0ch3;
+		i2c36 = &i2c12mux0ch4;
+		i2c37 = &i2c12mux0ch5;
+		i2c38 = &i2c12mux0ch6;
+		i2c39 = &i2c12mux0ch7;
+		i2c48 = &i2c6mux0ch0;
+		i2c49 = &i2c6mux0ch1;
+		i2c50 = &i2c6mux0ch2;
+		i2c51 = &i2c6mux0ch3;
+		i2c52 = &i2c8mux0ch0;
+		i2c53 = &i2c8mux0ch1;
+		i2c54 = &i2c8mux0ch2;
+		i2c55 = &i2c8mux0ch3;
+		i2c56 = &i2c10mux0ch0;
+		i2c57 = &i2c10mux0ch1;
+		i2c58 = &i2c10mux0ch2;
+		i2c59 = &i2c10mux0ch3;
+		i2c60 = &i2c13mux0ch0;
+		i2c61 = &i2c13mux0ch1;
+		i2c62 = &i2c13mux0ch2;
+		i2c63 = &i2c13mux0ch3;
+		i2c64 = &i2c6mux1ch0;
+		i2c65 = &i2c6mux1ch1;
+		i2c66 = &i2c6mux1ch2;
+		i2c67 = &i2c6mux1ch3;
+		i2c68 = &i2c8mux1ch0;
+		i2c69 = &i2c8mux1ch1;
+		i2c70 = &i2c8mux1ch2;
+		i2c71 = &i2c8mux1ch3;
+		i2c72 = &i2c10mux1ch0;
+		i2c73 = &i2c10mux1ch1;
+		i2c74 = &i2c10mux1ch2;
+		i2c75 = &i2c10mux1ch3;
+		i2c76 = &i2c13mux1ch0;
+		i2c77 = &i2c13mux1ch1;
+		i2c78 = &i2c13mux1ch2;
+		i2c79 = &i2c13mux1ch3;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+	status = "okay";
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"rtc-battery-voltage-read-enable","","","BMC_READY",
+			"","led-identify","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"FM_MUX1_SEL_R","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","debug-card-mux",
+	/*P0-P7*/	"power-button","","reset-button","",
+			"led-power","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","power-host-control","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","",
+				"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1",
+				"FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"SPI_BMC_BIOS_ROM_IRQ0_R_N","","","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_R_N","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	// MB FRU
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <112 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_NIC_PPS_IN_OE_N","FM_NIC_PPS_OUT_OE_N",
+			"FM_CPU0_TRIGGERTSC_OE_N","FM_NIC_PPS_IN_MUX_OE_N",
+			"FM_CPU0_CORETYPE0","FM_CPU0_CORETYPE1",
+			"FM_CPU0_CORETYPE2","FM_NIC_PPS_OUT_MUX_OE",
+			"CLKMUX_INPUT_LOSS_U45_R_N","FM_CPU0_SP7R1",
+			"FM_CPU0_SP7R2","FM_CPU0_SP7R3",
+			"FM_CPU0_SP7R4","",
+			"FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R";
+	};
+
+	fan-controller@21 {
+		compatible = "maxim,max31790";
+		reg = <0x21>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_0A_N","FM_CBL_PRSNT_0B_N",
+			"FM_CBL_PRSNT_1A_N","FM_CBL_PRSNT_1B_N",
+			"FM_MODULE_PWRGD_0A","FM_MODULE_PWRGD_0B",
+			"CLKMUX_INPUT_LOSS_U88_R_N","FM_MODULE_PWRGD_1B",
+			"","",
+			"CLKMUX_INPUT_LOSS_U83_R_N","CLKMUX_INPUT_LOSS_U84_R_N",
+			"FM_P3V3_E1S_0_FAULT_R_N","FM_P3V3_E1S_1_FAULT_R_N",
+			"E1S_0_P12V_ADC_R_ALERT","E1S_1_P12V_ADC_R_ALERT";
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_2A_N","FM_CBL_PRSNT_2B_N",
+			"FM_CBL_PRSNT_3A_N","FM_CBL_PRSNT_3B_N",
+			"FM_CBL_PRSNT_4A_N","FM_CBL_PRSNT_4B_N",
+			"FM_P3V3_NIC_400G_FAULT_R_N","FM_MODULE_PWRGD_2B",
+			"OCP_SFF_P12V_ADC_R_ALERT","FM_MODULE_PWRGD_3B",
+			"FM_THERMAL_ALERT_R_N","FM_MODULE_PWRGD_4B",
+			"FM_CBL_PRSNT_OSFP_A_N","FM_CBL_PRSNT_OSFP_B_N",
+			"FM_JTAG_MCIO_MUX_S0","FM_JTAG_MCIO_MUX_S1";
+	};
+
+	gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <118 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FAN_0_PRSNT_R1_N","FAN_1_PRSNT_R1_N",
+			"FAN_2_PRSNT_R1_N","FAN_3_PRSNT_R1_N",
+			"P12V_FAN_0_ADC_ALERT","P12V_FAN_1_ADC_ALERT",
+			"P12V_FAN_2_ADC_ALERT","P12V_FAN_3_ADC_ALERT",
+			"P12V_FAN0_PWRGD_R","P12V_FAN1_PWRGD_R",
+			"P12V_FAN2_PWRGD_R","P12V_FAN3_PWRGD_R",
+			"","","","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	sbrmi@3c {
+		compatible = "amd,sbrmi";
+		reg = <0x3c>;
+	};
+
+	sbtsi@4c {
+		compatible = "amd,sbtsi";
+		reg = <0x4c>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// HPM Board ID EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			// SCM Board ID EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c128";
+				reg = <0x53>;
+			};
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			voltage-sensor@4a {
+				compatible = "ti,ads7830";
+				reg = <0x4a>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+		};
+
+		i2c4mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+
+		i2c4mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// FIO FRU
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// E1S BP FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux1ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+
+		i2c5mux1ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+
+		i2c5mux1ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+
+		i2c5mux1ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"P12V_E1S_ADC_ALERT","BUFF0_100M_LOSB_PLD",
+					"E1S_BP_SKU_ID0","E1S_BP_SKU_ID1",
+					"E1S_BP_SKU_ID2","E1S_BP_REV_ID0",
+					"E1S_BP_REV_ID1","E1S_BP_REV_ID2",
+					"P3V3_E1S_1_FAULT_R_N","P3V3_E1S_2_FAULT_R_N",
+					"P3V3_E1S_3_FAULT_R_N","P3V3_E1S_4_FAULT_R_N",
+					"P12V_E1S_1_FAULT_R_N","P12V_E1S_2_FAULT_R_N",
+					"P12V_E1S_3_FAULT_R_N","P12V_E1S_4_FAULT_R_N";
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Rainbow0 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c6mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c6mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c6mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c6mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c6mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c6mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c6mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	// Rainbow2 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c8mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c8mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c8mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c8mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c8mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c8mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c8mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	// Rainbow3 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c10mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c10mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c10mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c10mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c10mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c10mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c10mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c10mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c11 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	// SWB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c12mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+
+		i2c12mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@42 {
+				compatible = "mps,mp2971";
+				reg = <0x42>;
+			};
+
+			power-monitor@43 {
+				compatible = "mps,mp2971";
+				reg = <0x43>;
+			};
+		};
+
+		i2c12mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+		};
+
+		i2c12mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+
+		i2c12mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@49 {
+				compatible = "ti,ads7830";
+				reg = <0x49>;
+			};
+		};
+
+		i2c12mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c12mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c12mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	// Rainbow1 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c13mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c13mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c13mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c13mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c13mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c13mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c13mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c13mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&mac3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"PDB1_HSC_PWR_OK","power-chassis-control",
+	"PDB2_HSC_PWR_OK","FM_MODULE_PWRGD_0A_OUT",
+	"PWRGD_P12V_MEM","FM_MODULE_PWRGD_0B_OUT",
+	"PWRGD_P12V_SCM","FM_MODULE_PWRGD_1B_OUT",
+	/*A4-A7 line 8-15*/
+	"PWRGD_P12V_FAN","FM_MODULE_PWRGD_2B_OUT",
+	"PWRGD_P5V_AUX","FM_MODULE_PWRGD_3B_OUT",
+	"power-chassis-good","FM_MODULE_PWRGD_4B_OUT",
+	"PWRGD_P1V8_LDO","FM_CBL_PRSNT_0A_N_OUT",
+	/*B0-B3 line 16-23*/
+	"PWRGD_P1V_LDO","FM_CBL_PRSNT_0B_N_OUT",
+	"PWRGD_PVDD33_S5","FM_CBL_PRSNT_1A_N_OUT",
+	"PWRGD_PVDD18_S5_P0","FM_CBL_PRSNT_1B_N_OUT",
+	"CPU0_SLP_S5_N","FM_CBL_PRSNT_2A_N_OUT",
+	/*B4-B7 line 24-31*/
+	"PWRGD_PVDDIO_MEM_S3_P0","FM_CBL_PRSNT_2B_N_OUT",
+	"CPU0_SLP_S3_N","FM_CBL_PRSNT_3A_N_OUT",
+	"FM_MODULE_PWRGD_1B","FM_CBL_PRSNT_3B_N_OUT",
+	"FM_MODULE_PWRGD_2B","FM_CBL_PRSNT_4A_N_OUT",
+	/*C0-C3 line 32-39*/
+	"FM_MODULE_PWRGD_3B","FM_CBL_PRSNT_4B_N_OUT",
+	"FM_MODULE_PWRGD_4B","P12V_FAN0_PWRGD_OUT",
+	"FM_MODULE_PWRGD_0B","P12V_FAN1_PWRGD_OUT",
+	"PWRGD_PVDDIO_P0","P12V_FAN2_PWRGD_OUT",
+	/*C4-C7 line 40-47*/
+	"PWRGD_PVDDCR_SOC_P0","P12V_FAN3_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU0_P0","P12V_FAN4_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU1_P0","P12V_FAN5_PWRGD_OUT",
+	"FM_CPU0_PWR_GOOD","P12V_FAN6_PWRGD_OUT",
+	/*D0-D3 line 48-55*/
+	"host0-ready","P12V_FAN7_PWRGD_OUT",
+	"FM_PWRGD_CPU0_PWROK","FAN_0_PRSNT_R1_N_OUT",
+	"FM_RST_CPU0_RESETL_N","FAN_1_PRSNT_R1_N_OUT",
+	"RST_CPU0_PERST0_R_N","FAN_2_PRSNT_R1_N_OUT",
+	/*D4-D7 line 56-63*/
+	"RST_CPU0_PERST1_R_N","FAN_3_PRSNT_R1_N_OUT",
+	"BIOS_POST_CMPLT","FAN_4_PRSNT_R1_N_OUT",
+	"","FAN_5_PRSNT_R1_N_OUT",
+	"","FAN_6_PRSNT_R1_N_OUT",
+	/*E0-E3 line 64-71*/
+	"FM_PWRGD_CHAD_CPU0","FAN_7_PRSNT_R1_N_OUT",
+	"FM_PWRGD_CHEH_CPU0","TRAY_SLOT_ID0_OUT",
+	"FM_PWRGD_CHIL_CPU0","TRAY_SLOT_ID1_OUT",
+	"FM_PWRGD_CHMP_CPU0","TRAY_SLOT_ID2_OUT",
+	/*E4-E7 line 72-79*/
+	"P12V_E1S_0_PWRGD","TRAY_SLOT_ID3_OUT",
+	"P12V_E1S_1_PWRGD","TRAY_SLOT_ID4_OUT",
+	"P3V3_E1S_0_PWRGD","SCM_JTAG_MUX_S0_R",
+	"P3V3_E1S_1_PWRGD","SCM_JTAG_MUX_S1_R",
+	/*F0-F3 line 80-87*/
+	"FM_MODULE_PWRGD_0A","BMC_SGPIO_READY",
+	"OCP_V3_1_P3V3_PLD_R_PWRGD","CPU0_SYS_RESET_N",
+	"P12V_OCP_V3_1_PLD_PWRGD","RST_CPU0_KBRST_N",
+	"PWRGD_OCP_SFF_PWR_GOOD","BIOS_DEBUG_MODE",
+	/*F4-F7 line 88-95*/
+	"","CLR_CMOS",
+	"","I3C_SPD_MUX_FORCE_SEL",
+	"","FM_JTAG_HOST_SEL",
+	"","TRAY_PRESENT_N",
+	/*G0-G3 line 96-103*/
+	"MB_REV_ID_0","UART_BMC_SEL0",
+	"MB_REV_ID_1","UART_BMC_SEL1",
+	"MB_REV_ID_2","SCM_USB_SEL",
+	"MB_SKU_ID_0","FORCE_ALL_PWRON",
+	/*G4-G7 line 104-111*/
+	"MB_SKU_ID_1","PASSWORD_CLEAR",
+	"MB_SKU_ID_2","",
+	"MB_SKU_ID_3","",
+	"","BIOS_DEBUG_MODE",
+	/*H0-H3 line 112-119*/
+	"FM_IOEXP_U538_INT_N","",
+	"FM_IOEXP_U539_INT_N","",
+	"FM_IOEXP_U540_INT_N","",
+	"FM_IOEXP_U541_INT_N","",
+	/*H4-H7 line 120-127*/
+	"FM_IOEXP_PDB2_U1003_INT_N","",
+	"","",
+	"","",
+	"FM_MAIN_PWREN_RMC_EN_ISO_R","",
+	/*I0-I3 line 128-135*/
+	"","","","",
+	"PDB_IRQ_PMBUS_ALERT_ISO_R_N","",
+	"PDB_UV_ALERT_ISO_R_N","",
+	/*I4-I7 line 136-143*/
+	"P12V_SCM_ADC_ALERT","",
+	"CPU0_REGS_I2C_ALERT_N","",
+	"FM_RTC_ALERT_N","",
+	"P0_I3C_APML_ALERT_L","",
+	/*J0-J3 line 144-151*/
+	"SMB_RJ45_FIO_TMP_ALERT","",
+	"FM_SMB_ALERT_MCIO_0A_N","",
+	"I3C_MCIO_0B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_1A_N","",
+	/*J4-J7 line 152-159*/
+	"I3C_MCIO_1B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_2A_N","",
+	"I3C_MCIO_2B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_3A_N","",
+	/*K0-K3 line 160-167*/
+	"I3C_MCIO_3B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_4A_N","",
+	"I3C_MCIO_4B_ALERT_ISO_R_N","",
+	"","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","","",
+	/*L0-L3 line 176-183*/
+	"FM_CPU0_THERMTRIP_N","",
+	"FM_CPU0_PROCHOT_N","",
+	"FM_CPU0_SMERR_N","",
+	"FM_PVDDCR_CPU0_P0_OCP_N","",
+	/*L4-L7 line 184-191*/
+	"FM_PVDDCR_CPU1_P0_OCP_N","",
+	"FM_PVDDCR_SOC_P0_OCP_N","",
+	"FM_OCP_PWRBRK_R_N","",
+	"PMIC_ERROR_N","",
+	/*M0-M3 line 192-199*/
+	"","","","","","","","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"FM_PRSNT_CPU0_N","",
+	"OCP_SFF_PRSNT_N","",
+	"E1S_0_PRSNT_R_N","",
+	"E1S_BP_0_PRSNT_R_N","",
+	/*N4-N7 line 216-223*/
+	"E1S_BP_1_PRSNT_R_N","",
+	"E1S_BP_2_PRSNT_R_N","",
+	"E1S_BP_3_PRSNT_R_N","",
+	"PDB_PRSNT_J311_N","",
+	/*O0-O3 line 224-231*/
+	"PDB_PRSNT_J312_N","",
+	"PDB_PRSNT_J313_N","",
+	"PDB_PRSNT_J314_N","",
+	"PRSNT_RJ45_FIO_N_R","",
+	/*O4-O7 line 232-239*/
+	"PRSNT_LEAK_CABLE_1_R_N","",
+	"PRSNT_LEAK_CABLE_2_R_N","",
+	"PRSNT_HDT_N","",
+	"LEAK_SWB_COLDPLATE","",
+	/*P0-P3 line 240-247*/
+	"LEAK_R3_COLDPLATE","",
+	"LEAK_R2_COLDPLATE","",
+	"LEAK_R1_COLDPLATE","",
+	"LEAK_R0_COLDPLATE","",
+	/*P4-P7 line 248-255*/
+	"LEAK_MB_COLDPLATE","",
+	"LEAK_PDB1_RIGHT_MANIFOLD","",
+	"LEAK_PDB1_LEFT_MANIFOLD","",
+	"LEAK_MB_MANIFOLD","";
+	status = "okay";
+};
+
+// BIOS Flash
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+
+	flash@0 {
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		status = "okay";
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
index 704ee684e0fb..5d4c7d979f1e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
@@ -508,7 +508,7 @@
 	status = "okay";
 	//HSC, AirMax Conn A
 	adm1278@45 {
-		compatible = "adm1275";
+		compatible = "adi,adm1275";
 		reg = <0x45>;
 		shunt-resistor-micro-ohms = <250>;
 	};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
new file mode 100644
index 000000000000..1d46eaee8656
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 400 BMC (64MB Datastore)";
+	compatible = "facebook,wedge400-data64-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			      <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash1";
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdhci1 {
+	max-frequency = <25000000>;
+	/*
+	 * DMA mode needs to be disabled to avoid conflicts with UHCI
+	 * Controller in AST2500 SoC.
+	 */
+	sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index 5a8169bbda87..ef0cfc51cda4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -1,376 +1,14 @@
 // SPDX-License-Identifier: GPL-2.0+
 // Copyright (c) 2019 Facebook Inc.
-/dts-v1/;
 
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include "ast2500-facebook-netbmc-common.dtsi"
+#include "aspeed-bmc-facebook-wedge400-data64.dts"
 
 / {
 	model = "Facebook Wedge 400 BMC";
 	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (11-0076) provides 8 channels connecting to
-		 * FCM (Fan Controller Module).
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		spi2 = &spi_gpio;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
-	};
-
-	ast-adc-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
-			      <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
-	};
-
-	/*
-	 * GPIO-based SPI Master is required to access SPI TPM, because
-	 * full-duplex SPI transactions are not supported by ASPEED SPI
-	 * Controllers.
-	 */
-	spi_gpio: spi {
-		status = "okay";
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-		gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-
-		tpm@0 {
-			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
-			spi-max-frequency = <33000000>;
-			reg = <0>;
-		};
-	};
 };
 
-/*
- * Both firmware flashes are 128MB on Wedge400 BMC.
- */
 &fmc_flash0 {
+	/delete-node/partitions;
 #include "facebook-bmc-flash-layout-128.dtsi"
 };
-
-&fmc_flash1 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		flash1@0 {
-			reg = <0x0 0x8000000>;
-			label = "flash1";
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-		     &pinctrl_rxd2_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-/*
- * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
- * communication.
- */
-&i2c0 {
-	status = "okay";
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	i2c-mux@76 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x76>;
-		i2c-mux-idle-disconnect;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&sdhci1 {
-	max-frequency = <25000000>;
-	/*
-	 * DMA mode needs to be disabled to avoid conflicts with UHCI
-	 * Controller in AST2500 SoC.
-	 */
-	sdhci-caps-mask = <0x0 0x580000>;
-};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98477792aa00..e4172be84e7f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -17,6 +17,27 @@
 		serial6 = &uart7;
 		serial7 = &uart8;
 		serial8 = &uart9;
+
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
 	};
 
 	chosen {
@@ -28,11 +49,43 @@
 		reg = <0x80000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ramoops@b8dfa000 {
+			compatible = "ramoops";
+			reg = <0xb8dfa000 0x6000>;
+			record-size = <0x2000>;
+			console-size = <0x2000>;
+			pmsg-size = <0x2000>;
+			max-reason = <1>;
+		};
+	};
+
 	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
 				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
-				<&adc1 0>, <&adc1 1>;
+				<&adc1 0>, <&adc1 1>, <&adc1 7>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			reg = <0>;
+			spi-max-frequency = <33000000>;
+		};
 	};
 };
 
@@ -83,6 +136,13 @@
 	aspeed,ext-pulse-duration = <256>;
 };
 
+&wdt2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst2_default>;
+	aspeed,reset-type = "system";
+};
+
 &mac2 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -105,15 +165,17 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
 		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64.dtsi"
+#include "openbmc-flash-layout-128.dtsi"
 	};
 	flash@1 {
 		status = "okay";
 		m25p,fast-read;
-		label = "bmc2";
-		spi-rx-bus-width = <4>;
+		label = "alt-bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
 		spi-max-frequency = <50000000>;
 	};
 };
@@ -129,9 +191,43 @@
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+				"SLOT1_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
-		compatible = "adi,adm1278";
+		compatible = "adi,adm1281";
 		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
 	};
 };
 
@@ -146,9 +242,43 @@
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+				"SLOT2_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
-		compatible = "adi,adm1278";
+		compatible = "adi,adm1281";
 		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
 	};
 };
 
@@ -163,9 +293,43 @@
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+				"SLOT3_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
-		compatible = "adi,adm1278";
+		compatible = "adi,adm1281";
 		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
 	};
 };
 
@@ -180,9 +344,43 @@
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+				"SLOT4_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
-		compatible = "adi,adm1278";
+		compatible = "adi,adm1281";
 		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
 	};
 };
 
@@ -197,9 +395,43 @@
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+				"SLOT5_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
-		compatible = "adi,adm1278";
+		compatible = "adi,adm1281";
 		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
 	};
 };
 
@@ -214,9 +446,43 @@
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+				"SLOT6_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
-		compatible = "adi,adm1278";
+		compatible = "adi,adm1281";
 		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
 	};
 };
 
@@ -231,9 +497,43 @@
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+				"SLOT7_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
-		compatible = "adi,adm1278";
+		compatible = "adi,adm1281";
 		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
 	};
 };
 
@@ -248,48 +548,368 @@
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 	};
 
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+				"SLOT8_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	power-sensor@40 {
-		compatible = "adi,adm1278";
+		compatible = "adi,adm1281";
 		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
 	};
 };
 
 &i2c8 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 	bus-frequency = <400000>;
 	i2c-mux@70 {
 		compatible = "nxp,pca9544";
-		idle-state = <0>;
-		i2c-mux-idle-disconnect;
 		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux17: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux18: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux19: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
 	};
 };
 
 &i2c9 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 	bus-frequency = <400000>;
 	i2c-mux@71 {
 		compatible = "nxp,pca9544";
-		idle-state = <0>;
-		i2c-mux-idle-disconnect;
 		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux20: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux21: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux22: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux23: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
 	};
 };
 
 &i2c10 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 	bus-frequency = <400000>;
+	i2c-mux@74 {
+		compatible = "nxp,pca9544";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux28: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9506";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names = "","","","",
+						  "NIC0_MAIN_PWR_EN",
+						  "NIC1_MAIN_PWR_EN",
+						  "NIC2_MAIN_PWR_EN",
+						  "NIC3_MAIN_PWR_EN",
+						  "","","","","","","","",
+						  "","","","","","","","",
+						  "","","","","","","","";
+			};
+		};
+
+		imux29: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
 };
 
 &i2c11 {
 	status = "okay";
 	power-sensor@10 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
 	power-sensor@12 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x12>;
 	};
 
@@ -298,6 +918,20 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "P48V_OCP_GPIO1", "P48V_OCP_GPIO2",
+				  "P48V_OCP_GPIO3", "FAN_BOARD_0_REVISION_0_R",
+				  "FAN_BOARD_0_REVISION_1_R",
+				  "FAN_BOARD_1_REVISION_0_R",
+				  "FAN_BOARD_1_REVISION_1_R", "RST_MUX_R_N",
+				  "RST_LED_CONTROL_FAN_BOARD_0_N",
+				  "RST_LED_CONTROL_FAN_BOARD_1_N",
+				  "RST_IOEXP_FAN_BOARD_0_N",
+				  "RST_IOEXP_FAN_BOARD_1_N",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_0_R",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
+				  "", "";
 	};
 
 	gpio@21 {
@@ -305,6 +939,19 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC_OCP_SLOT_ODD_GPIO1",
+				  "HSC_OCP_SLOT_ODD_GPIO2",
+				  "HSC_OCP_SLOT_ODD_GPIO3",
+				  "HSC_OCP_SLOT_EVEN_GPIO1",
+				  "HSC_OCP_SLOT_EVEN_GPIO2",
+				  "HSC_OCP_SLOT_EVEN_GPIO3",
+				  "ADC_TYPE_0_R", "ADC_TYPE_1_R",
+				  "MEDUSA_BOARD_REV_0", "MEDUSA_BOARD_REV_1",
+				  "MEDUSA_BOARD_REV_2", "MEDUSA_BOARD_TYPE",
+				  "DELTA_MODULE_TYPE", "P12V_HSC_TYPE",
+				  "", "";
 	};
 
 	gpio@22 {
@@ -312,6 +959,16 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "CARD_TYPE_SLOT1", "CARD_TYPE_SLOT2",
+				  "CARD_TYPE_SLOT3", "CARD_TYPE_SLOT4",
+				  "CARD_TYPE_SLOT5", "CARD_TYPE_SLOT6",
+				  "CARD_TYPE_SLOT7", "CARD_TYPE_SLOT8",
+				  "OC_P48V_HSC_0_N", "FLT_P48V_HSC_0_N",
+				  "OC_P48V_HSC_1_N", "FLT_P48V_HSC_1_N",
+				  "EN_P48V_AUX_0", "EN_P48V_AUX_1",
+				  "PWRGD_P12V_AUX_0", "PWRGD_P12V_AUX_1";
 	};
 
 	gpio@23 {
@@ -319,6 +976,16 @@
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC1_ALERT1_R_N", "HSC2_ALERT1_R_N",
+				  "HSC3_ALERT1_R_N", "HSC4_ALERT1_R_N",
+				  "HSC5_ALERT1_R_N", "HSC6_ALERT1_R_N",
+				  "HSC7_ALERT1_R_N", "HSC8_ALERT1_R_N",
+				  "HSC1_ALERT2_R_N", "HSC2_ALERT2_R_N",
+				  "HSC3_ALERT2_R_N", "HSC4_ALERT2_R_N",
+				  "HSC5_ALERT2_R_N", "HSC6_ALERT2_R_N",
+				  "HSC7_ALERT2_R_N", "HSC8_ALERT2_R_N";
 	};
 
 	temperature-sensor@48 {
@@ -331,39 +998,84 @@
 		reg = <0x49>;
 	};
 
-	temperature-sensor@4a {
-		compatible = "ti,tmp75";
-		reg = <0x4a>;
-	};
-
-	temperature-sensor@4b {
-		compatible = "ti,tmp75";
-		reg = <0x4b>;
-	};
-
 	eeprom@54 {
-		compatible = "atmel,24c256";
+		compatible = "atmel,24c128";
 		reg = <0x54>;
 	};
 };
 
 &i2c12 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 	bus-frequency = <400000>;
 
-	temperature-sensor@48 {
-		compatible = "ti,tmp75";
-		reg = <0x48>;
-	};
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
 
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
+		imux34: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
 
-	rtc@6f {
-		compatible = "nuvoton,nct3018y";
-		reg = <0x6f>;
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			rtc@6f {
+				compatible = "nuvoton,nct3018y";
+				reg = <0x6f>;
+			};
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux35: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 };
 
@@ -380,24 +1092,26 @@
 };
 
 &i2c14 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 	bus-frequency = <400000>;
 	adc@1d {
 		compatible = "ti,adc128d818";
 		reg = <0x1d>;
-		ti,mode = /bits/ 8 <2>;
+		ti,mode = /bits/ 8 <1>;
 	};
 
-	adc@35 {
+	adc@36 {
 		compatible = "ti,adc128d818";
-		reg = <0x35>;
-		ti,mode = /bits/ 8 <2>;
+		reg = <0x36>;
+		ti,mode = /bits/ 8 <1>;
 	};
 
 	adc@37 {
 		compatible = "ti,adc128d818";
 		reg = <0x37>;
-		ti,mode = /bits/ 8 <2>;
+		ti,mode = /bits/ 8 <1>;
 	};
 
 	power-sensor@40 {
@@ -440,43 +1154,67 @@
 		reg = <0x51>;
 	};
 
-	i2c-mux@71 {
-		compatible = "nxp,pca9846";
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
+		reg = <0x73>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-
-		idle-state = <0>;
 		i2c-mux-idle-disconnect;
-		reg = <0x71>;
 
-		i2c@0 {
+		imux32: i2c@0 {
+			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+
+		imux33: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+	};
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux30: i2c@0 {
 			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			adc@1f {
 				compatible = "ti,adc128d818";
 				reg = <0x1f>;
-				ti,mode = /bits/ 8 <2>;
+				ti,mode = /bits/ 8 <1>;
 			};
 
-			pwm@20{
-				compatible = "max31790";
+			pwm@20 {
+				compatible = "maxim,max31790";
 				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
-			gpio@22{
+			gpio@22 {
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
-			pwm@23{
-				compatible = "max31790";
-				reg = <0x23>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
 			};
 
 			adc@33 {
@@ -499,34 +1237,32 @@
 			};
 		};
 
-		i2c@1 {
+		imux31: i2c@1 {
+			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0>;
 
 			adc@1f {
 				compatible = "ti,adc128d818";
 				reg = <0x1f>;
-				ti,mode = /bits/ 8 <2>;
+				ti,mode = /bits/ 8 <1>;
 			};
 
-			pwm@20{
-				compatible = "max31790";
+			pwm@20 {
+				compatible = "maxim,max31790";
 				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
-			gpio@22{
+			gpio@22 {
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
-			pwm@23{
-				compatible = "max31790";
-				reg = <0x23>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
 			};
 
 			adc@33 {
@@ -549,56 +1285,89 @@
 			};
 		};
 	};
+};
 
-	i2c-mux@73 {
+&i2c15 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	multi-master;
+	bus-frequency = <400000>;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@72 {
 		compatible = "nxp,pca9544";
+		reg = <0x72>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		idle-state = <0>;
-		i2c-mux-idle-disconnect;
-		reg = <0x73>;
-
-		i2c@0 {
+		imux24: i2c@0 {
+			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 
-			adc@35 {
-				compatible = "maxim,max11617";
-				reg = <0x35>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
 			};
 		};
 
-		i2c@1 {
+		imux25: i2c@1 {
+			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 
-			adc@35 {
-				compatible = "maxim,max11617";
-				reg = <0x35>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
 			};
 		};
-	};
-};
 
-&i2c15 {
-	status = "okay";
-	mctp-controller;
-	multi-master;
-	bus-frequency = <400000>;
+		imux26: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 
-	mctp@10 {
-		compatible = "mctp-i2c-controller";
-		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
-	};
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
 
-	i2c-mux@72 {
-		compatible = "nxp,pca9544";
-		idle-state = <0>;
-		i2c-mux-idle-disconnect;
-		reg = <0x72>;
+		imux27: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
 	};
 };
 
@@ -612,10 +1381,10 @@
 
 &adc1 {
 	status = "okay";
-	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>;
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+			&pinctrl_adc15_default>;
 };
 
-
 &ehci0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
new file mode 100644
index 000000000000..2486981f3d6b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
@@ -0,0 +1,1067 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 5 BMC";
+	compatible = "facebook,yosemite5-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c16 = &i2c5mux0ch0;
+		i2c17 = &i2c5mux0ch1;
+		i2c18 = &i2c5mux0ch2;
+		i2c19 = &i2c5mux0ch3;
+		i2c20 = &i2c5mux1ch0;
+		i2c21 = &i2c5mux1ch1;
+		i2c22 = &i2c5mux1ch2;
+		i2c23 = &i2c5mux1ch3;
+		i2c24 = &i2c6mux0ch0;
+		i2c25 = &i2c6mux0ch1;
+		i2c26 = &i2c6mux0ch2;
+		i2c27 = &i2c6mux0ch3;
+		i2c28 = &i2c8mux0ch0;
+		i2c29 = &i2c8mux0ch1;
+		i2c30 = &i2c8mux0ch2;
+		i2c31 = &i2c8mux0ch3;
+		i2c32 = &i2c30mux0ch0;
+		i2c33 = &i2c30mux0ch1;
+		i2c34 = &i2c30mux0ch2;
+		i2c35 = &i2c30mux0ch3;
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+					  <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+					  <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default>;
+	status = "okay";
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","","BMC_I2C1_FPGA_ALERT","BMC_READY",
+			"IOEXP_INT_3V3","FM_ID_LED","","",
+	/*C0-C7*/	"","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N","","BMC_I2C_SSIF_ALERT",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"FM_BMC_MUX1_SEL","","","",
+			"","","FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","FLASH_WP_STATUS","BMC_JTAG_MUX_SEL","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP","SCM_HPM_STBY_RST_N",
+			"SCM_HPM_STBY_EN","STBY_POWER_PG_3V3","TH500_SHDN_OK","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1","led-postcode-2",
+			"led-postcode-3","led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"RUN_POWER_PG","PWR_BRAKE","CHASSIS_AC_LOSS","BSM_PRSNT_N",
+			"PSU_SMB_ALERT","FM_TPM_PRSNT_0_N","PSU_FW_UPDATING_N","",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT","ID_RST_BTN_BMC_N",
+			"RST_BMC_RSTBTN_OUT_N","BMC_PWR_LED","RUN_POWER_EN","SHDN_FORCE","",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_LV3_N","USB_OC0_REAR_N","UART_MUX_SEL",
+			"I2C_MUX_RESET","RSVD_NV_PLT_DETECT","SPI_TPM_INT",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT",
+	/*R0-R7*/	"THERM_BB_WARN","SPI_BMC_FPGA_INT","CPU_BOOT_DONE","PMBUS_GNT",
+			"CHASSIS_PWR_BRK","PCIE_WAKE","PDB_THERM_OVERT","SHDN_REQ",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N","SYS_FAULT_LED_N","RUN_POWER_FAULT",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"FM_DBP_BMC_PRDY_N","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT","L0L1_RST_REQ_OUT","BMC_ID_BEEP_SEL",
+			"BMC_I2C0_FPGA_ALERT","SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","IRQ_ESPI_LPC_SERIRQ_ALERT0_N","",
+	/*X0-X7*/	"","FM_DBP_CPU_PREQ_GF_N","","","","","","",
+	/*Y0-Y7*/	"","","FM_FLASH_LATCH_N","BMC_EMMC_RST_N","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","FM_BOARD_BMC_REV_ID0",
+			"FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","SPI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_N","","";
+};
+
+/* MB CPLD I2C */
+&i2c0 {
+	status = "okay";
+};
+
+/* CPU I2C */
+&i2c1 {
+	status = "okay";
+};
+
+/* MCIO 2A I2C */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* Socket 0 SBRMI */
+	sbrmi@3c {
+		compatible = "amd,sbrmi";
+		reg = <0x3c>;
+	};
+
+	/* Socket 0 SBTSI */
+	sbtsi@4c {
+		compatible = "amd,sbtsi";
+		reg = <0x4c>;
+	};
+};
+
+&i2c4 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	/* OCP NIC TEMP */
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	/* OCP NIC FRU EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* I2C MUX for MCIO 1A */
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	/* I2C MUX for MCIO 0A */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux1ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* I2C MUX for PWRPIC #13 ~ #16 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		/* PWRPIC #13 */
+		i2c6mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #14 */
+		i2c6mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #16 */
+		i2c6mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #15 */
+		i2c6mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* SCM CPLD I2C */
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	power-monitor@14 {
+		compatible = "infineon,xdp710";
+		reg = <0x14>;
+	};
+
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	/* PADDLE BD IOEXP */
+	gpio-expander@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HSC_OC_GPIO0", "HSC_OC_GPIO1",
+			"HSC_OC_GPIO2", "HSC_OC_GPIO3";
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina238";
+		reg = <0x42>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@43 {
+		compatible = "lltc,ltc4287";
+		reg = <0x43>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@47 {
+		compatible = "ti,tps25990";
+		reg = <0x47>;
+		ti,rimon-micro-ohms = <430000000>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	/* PDB FRU */
+	eeprom@56 {
+		compatible = "atmel,24c128";
+		reg = <0x56>;
+	};
+
+	/* Paddle BD FRU */
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+	};
+
+	power-monitor@58 {
+		compatible = "renesas,isl28022";
+		reg = <0x58>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@59 {
+		compatible = "renesas,isl28022";
+		reg = <0x59>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@5a {
+		compatible = "renesas,isl28022";
+		reg = <0x5a>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@5b {
+		compatible = "renesas,isl28022";
+		reg = <0x5b>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	psu@5c {
+		compatible = "renesas,raa228006";
+		reg = <0x5c>;
+	};
+
+	fan-controller@5e{
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	/* I2C MUX for PWRPIC #1, #2, #11, #12 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		/* PWRPIC #1 */
+		i2c8mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #2 */
+		i2c8mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #12 (Connector to CXL BD) */
+		i2c8mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c30mux0ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c30mux0ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c30mux0ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					adc@1e {
+						compatible = "ti,adc128d818";
+						reg = <0x1e>;
+						ti,mode = /bits/ 8 <1>;
+					};
+
+					adc@1f {
+						compatible = "ti,adc128d818";
+						reg = <0x1f>;
+						ti,mode = /bits/ 8 <1>;
+					};
+
+					/* CXL BD IOEXP */
+					gpio-expander@27 {
+						compatible = "nxp,pca9535";
+						reg = <0x27>;
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-line-names =
+						"IRQ_TEMP_0_ALERT_N","IRQ_TEMP_1_ALERT_N",
+						"ALERT_PMBUS_0_N","ALERT_PMBUS_1_N",
+						"ALERT_PMBUS_2_N","IRQ_INA230_12V_ALERT_N",
+						"RST_IOX_CXL_N","DEBUG_UART_SEL_0",
+						"DEBUG_UART_SEL_1","BMC_REMOTEJTAG_EN_N",
+						"JTAG_BMC_3V3_CTL_CLR_N","DDR_CH02_I2C_MUX_SEL",
+						"DDR_CH13_I2C_MUX_SEL","SYS_OK",
+						"CXL_VRHOT_ALERT_R1_N","";
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp75";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4c {
+						compatible = "ti,tmp432";
+						reg = <0x4c>;
+					};
+
+					power-sensor@4d {
+						compatible = "ti,ina230";
+						reg = <0x4d>;
+						shunt-resistor = <2000>;
+					};
+
+					temperature-sensor@4e {
+						compatible = "ti,tmp75";
+						reg = <0x4e>;
+					};
+
+					/* CXL FRU */
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+					};
+				};
+
+				i2c30mux0ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		/* PWRPIC #11 */
+		i2c8mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	/* SCM FRU */
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	/* BSM FRU */
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+/* MCIO 0A I2C */
+&i2c10 {
+	status = "okay";
+
+	/* E1S EB IOEXP0 */
+	gpio-expander@21 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <172 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RST_SMB_E1S_0","LED_ACTIVE_E1S_0",
+			"E1S_0_PRSNT_N","RST_PCIE_E1S_0_PERST",
+			"E1S_0_PWRDIS","ALERT_INA_0",
+			"","",
+			"RST_SMB_E1S_1","LED_ACTIVE_E1S_1",
+			"E1S_1_PRSNT_N","RST_PCIE_E1S_1_PERST",
+			"E1S_1_PWRDIS","ALERT_INA_1",
+			"","";
+	};
+
+	/* E1S EB IOEXP1 */
+	gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <174 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_E1S_EN_0","PWRGD_P12V_E1S_0",
+			"P12V_E1S_FLTB_0","PWRGD_P3V3_E1S_0",
+			"FM_P3V3_E1S_0_FAULT","P12V_E1S_EN_1",
+			"PWRGD_P12V_E1S_1","P12V_E1S_FLTB_1",
+			"PWRGD_P3V3_E1S_1","FM_P3V3_E1S_1_FAULT",
+			"","",
+			"","",
+			"PWRGD_P3V3_AUX","ALERT_TEMP";
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina233";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+		ti,maximum-expected-current-microamp = <32768000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina233";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+		ti,maximum-expected-current-microamp = <32768000>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	/* E1S EB FRU */
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* MB IOEXP */
+	gpio-expander@21 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <170 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"ALERT_CLKMUX_0_LOSS_N","ALERT_CLKMUX_1_LOSS_N",
+			"ALERT_CLKMUX_2_LOSS_N","ALERT_CLKMUX_3_LOSS_N",
+			"FM_CLKMUX_0_SEL","FM_CLKMUX_1_SEL",
+			"FM_CLKMUX_2_SEL","FM_CLKMUX_3_SEL",
+			"RST_USB_HUB_0_N","FM_CLKGEN_GPIO2",
+			"","FM_BMC_RTC_RST",
+			"FM_P3V_BAT_SCALED_EN","",
+			"FM_CLKGEN_GPIO4","RST_USB_HUB_1_N";
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@43 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads7830";
+		reg = <0x49>;
+	};
+
+	adc@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+};
+
+/* MCIO 4A I2C */
+&i2c12 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "national,lm75b";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "national,lm75b";
+		reg = <0x49>;
+	};
+
+	/* CLKGEN FRU */
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+	};
+
+	/* MB FRU */
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	/* CPU FRU */
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+/* PROT reserve */
+&i2c14 {
+	status = "okay";
+};
+
+/* MCIO 3A I2C */
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*"input pin","output pin"*/
+	/*bit0-bit7*/
+	"PWRGD_CPU_PWROK","SGPIO_RSTBTN_OUT",
+	"PWRGD_CPU_PWROK_1","SGPIO_BMC_READY",
+	"PWRGD_CPU_PWROK_2","IBB_BMC_SRST",
+	"host0-ready","FM_I3C_SPD_AH_SEL_R",
+	"PCIe_HP_BOOT","FM_I3C_SPD_IP_SEL_R",
+	"PCIe_HP_DATA","FM_JTAG_BMC_MUX_S0_R",
+	"PCIe_HP_NIC","FM_JTAG_BMC_MUX_S1_R",
+	"","FM_JTAG_BMC_OE_1_R_N",
+	/*bit8-bit15*/
+	"PWRGD_PVDDCR_CPU0_P0","FM_JTAG_BMC_OE_R_N",
+	"PWRGD_PVDDCR_SOC_P0","FM_REMOTEJTAG_EN_R_N",
+	"PWRGD_PVDDCR_CPU1_P0","FM_CPU_FORCE_SELFREFRESH_R",
+	"PWRGD_P3V3_STBY","FM_CPU_NMI_SYNC_FLOOD_R_N",
+	"PWRGD_PVDD33_S5","FM_CPU_TRIGGERTSC_OE_R_N",
+	"PWRGD_PVDD18_S5_P0","FM_PASSWORD_CLEAR_R_N",
+	"PWRGD_PVDDIO_P0","FM_BIOS_USB_RECOVERY_N",
+	"PWRGD_PVDDIO_MEM_S3_P0","FM_USB_MUX_OE_R_N",
+	/*bit16-bit23*/
+	"PWRGD_P1V8_STBY","FM_USB_MUX_SEL_R",
+	"PWRGD_P1V0_STBY","RST_SMB_BOOT_R_N",
+	"PWRGD_P1V2_STBY","RST_SMB_MCIO0A_R_N",
+	"IBB_BMC_SRST","RST_SMB_NIC_R_N",
+	"PWRGD_P12V_E1S_0","FM_PPS_NIC_IN_BUF_OE_R_N",
+	"PWRGD_P12V_E1S_1","FM_PPS_NIC_IN_EN_R",
+	"RST_PCIE_BOOT_PERST_N","FM_PPS_NIC_IN_OE_R_N",
+	"PWRGD_P12V_NIC","FM_PPS_NIC_IN_S0_R",
+	/*bit24-bit31*/
+	"PWRGD_P12V_SCM","FM_PPS_NIC_IN_S1_R",
+	"PWRGD_P12V_DIMM","FM_PPS_NIC_OUT_BUF_OE_R_N",
+	"PWRGD_CPU_DIMM0_AH","FM_PPS_NIC_OUT_CPU_OE_R_N",
+	"PWRGD_CPU_DIMM1_IP","FM_PPS_NIC_OUT_EN_R",
+	"PWRGD_NIC_CPLD","JTAG_CPLD_DBREQ_R_N",
+	"ALERT_INA230_DIMM_0_N","HDT_HDR_RESET_R_N",
+	"ALERT_INA230_DIMM_1_N","FM_SMB_AUTH_MUX_OE_R_N",
+	"ALERT_INA230_E1S_0_N","FM_SCM_LED_R_N",
+	/*bit32-bit39*/
+	"ALERT_INA230_E1S_1_N","",
+	"ALERT_INA230_FAN0_N","",
+	"ALERT_INA230_FAN1_N","",
+	"ALERT_INA230_FAN2_N","",
+	"ALERT_INA230_FAN3_N","",
+	"ALERT_INA230_NIC_N","",
+	"ALERT_INA230_SCM_N","",
+	"ALERT_IRQ_PMBUS_PWR11_N","",
+	/*bit40-bit47*/
+	"ALERT_MCIO2A_LEAK_DETECT_N","",
+	"ALERT_MCIO3A_LEAK_DETECT_N","",
+	"ALERT_MCIO4A_LEAK_DETECT_N","",
+	"ALERT_OC_PADDLE2_N","",
+	"ALERT_OC_PWR2_N","",
+	"ALERT_OC_PWR11_N","",
+	"ALERT_PADDLE2_SMB_N","",
+	"ALERT_PWR14_SB2_LEAK_DETECT_N","",
+	/*bit48-bit55*/
+	"ALERT_PWR14_SB3_LEAK_DETECT_N","",
+	"ALERT_PWR15_SB2_LEAK_DETECT_N","",
+	"ALERT_PWR15_SB3_LEAK_DETECT_N","",
+	"ALERT_SMB_MCIO0A_N","",
+	"ALERT_SMB_MCIO1A_N","",
+	"ALERT_SMB_MCIO2A_N","",
+	"ALERT_SMB_MCIO2B_N","",
+	"ALERT_SMB_MCIO3A_N","",
+	/*bit56-bit63*/
+	"ALERT_SMB_MCIO3B_N","",
+	"ALERT_SMB_MCIO4A_N","",
+	"ALERT_SMB_MCIO4B_N","",
+	"ALERT_THERMALTRIP_MCIO1A_N","",
+	"ALERT_THERMALTRIP_MCIO2A_N","",
+	"ALERT_THERMALTRIP_MCIO3A_N","",
+	"ALERT_THERMALTRIP_MCIO4A_N","",
+	"ALERT_UV_PADDLE2_N","",
+	/*bit64-bit71*/
+	"ALERT_UV_PWR2_N","",
+	"ALERT_UV_PWR11_N","",
+	"ALERT_VR_SMB_N","",
+	"FAULT_FAN_0_N","",
+	"FAULT_FAN_1_N","",
+	"FAULT_FAN_2_N","",
+	"FAULT_FAN_3_N","",
+	"FAULT_P3V3_E1S_0_N","",
+	/*bit72-bit79*/
+	"FAULT_P3V3_E1S_1_N","",
+	"FAULT_P3V3_NIC_N","",
+	"FAULT_P12V_NIC_N","",
+	"FAULT_P12V_SCM_N","",
+	"P0_I3C_APML_ALERT_L","",
+	"ALERT_INLET_TEMP_N","",
+	"FM_CPU_PROCHOT_R_N","",
+	"FM_CPU_THERMTRIP_N","",
+	/*bit80-bit87*/
+	"ALERT_OUTLET_TEMP_N","",
+	"ALERT_RTC_N","",
+	"PVDDCR_CPU0_P0_OCP_N","",
+	"PVDDCR_CPU1_P0_OCP_N","",
+	"PVDDCR_SOC_P0_OCP_N","",
+	"MB_IOEXP_INT","",
+	"E1S_0_BD_IOEXP","",
+	"E1S_1_BD_IOEXP","",
+	/*bit88-bit95*/
+	"PADDLE_BD_IOEXP_INT","",
+	"FM_BOARD_REV_ID0","",
+	"FM_BOARD_REV_ID1","",
+	"FM_BOARD_REV_ID2","",
+	"FM_VR_TYPE_ID0","",
+	"FM_VR_TYPE_ID1","",
+	"PRSNT_BOOT_N_IOEXP","",
+	"PRSNT_DATA_N_IOEXP","",
+	/*bit96-bit103*/
+	"PRSNT_NIC_N_IOEXP","",
+	"PRSNT_BOOT_N_FF","",
+	"PRSNT_MCIO1A_N_FF","",
+	"NIC_PRSNT_N","",
+	"","",
+	"","",
+	"","",
+	"","",
+	/*bit104-bit111*/
+	"","","","","","","","","","","","","","","","",
+	/*bit112-bit119*/
+	"","","","","","","","","","","","","","","","",
+	/*bit120-bit127*/
+	"","","","","","","","","","","","","","","","";
+	status = "okay";
+};
+
+/* BIOS Flash */
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+
+	flash@0 {
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		status = "okay";
+	};
+};
+
+/* Host Console */
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+/* SOL */
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+/* BMC Console */
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
new file mode 100644
index 000000000000..63fcb7a7619a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
@@ -0,0 +1,609 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-dual.dtsi"
+
+/ {
+	model = "Balcones";
+	compatible = "ibm,balcones-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+			no-map;
+		};
+	};
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc {
+	clk-phase-mmc-hs200 = <180>, <180>;
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","fan-ctlr-reset","rtc-battery-voltage-read-enable",
+				"reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+				"","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","",
+				"",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	pmic@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9551";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "cablecard2-cxp-top";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "cablecard2-cxp-bot";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pwm@53 {
+		compatible = "maxim,max31785a";
+		reg = <0x53>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "front-sys-id0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "front-check-log0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "front-enc-fault1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "front-sys-pwron0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	pressure-sensor@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"",
+			"",
+			"SLOT2_PRSNT_EN_RSVD",
+			"",
+			"",
+			"",
+			"",
+			"SLOT2_EXPANDER_PRSNT_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	status = "okay";
+};
+
+&lpc_ctrl {
+	memory-region = <&flash_memory>;
+	status = "okay";
+};
+
+&mac2 {
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
index dfe5cc3edb52..bc4c46235421 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
@@ -207,7 +207,8 @@
 	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
 			"factory-reset-toggle","",
 	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","",
+			"",
 	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
 	/*J0-J7*/	"","","","","","","","",
 	/*K0-K7*/	"","","","","","","","",
@@ -215,7 +216,7 @@
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"","","","","","","","",
 	/*O0-O7*/	"","","","usb-power","","","","",
-	/*P0-P7*/	"","","","","pcieslot-power","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
 	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
 	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","",
 			"",
@@ -739,7 +740,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@10 {
+		led@a {
 			reg = <10>;
 			default-state = "keep";
 			label = "ddimm10";
@@ -747,7 +748,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@11 {
+		led@b {
 			reg = <11>;
 			default-state = "keep";
 			label = "ddimm11";
@@ -755,7 +756,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@12 {
+		led@c {
 			reg = <12>;
 			default-state = "keep";
 			label = "ddimm12";
@@ -763,7 +764,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@13 {
+		led@d {
 			reg = <13>;
 			default-state = "keep";
 			label = "ddimm13";
@@ -771,7 +772,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@14 {
+		led@e {
 			reg = <14>;
 			default-state = "keep";
 			label = "ddimm14";
@@ -779,7 +780,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@15 {
+		led@f {
 			reg = <15>;
 			default-state = "keep";
 			label = "ddimm15";
@@ -876,7 +877,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@10 {
+		led@a {
 			reg = <10>;
 			default-state = "keep";
 			label = "ddimm26";
@@ -884,7 +885,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@11 {
+		led@b {
 			reg = <11>;
 			default-state = "keep";
 			label = "ddimm27";
@@ -892,7 +893,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@12 {
+		led@c {
 			reg = <12>;
 			default-state = "keep";
 			label = "ddimm28";
@@ -900,7 +901,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@13 {
+		led@d {
 			reg = <13>;
 			default-state = "keep";
 			label = "ddimm29";
@@ -908,7 +909,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@14 {
+		led@e {
 			reg = <14>;
 			default-state = "keep";
 			label = "ddimm30";
@@ -916,7 +917,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@15 {
+		led@f {
 			reg = <15>;
 			default-state = "keep";
 			label = "ddimm31";
@@ -1005,7 +1006,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@10 {
+		led@a {
 			reg = <10>;
 			default-state = "keep";
 			label = "pcieslot7";
@@ -1013,7 +1014,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@11 {
+		led@b {
 			reg = <11>;
 			default-state = "keep";
 			label = "pcieslot8";
@@ -1021,7 +1022,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@12 {
+		led@c {
 			reg = <12>;
 			default-state = "keep";
 			label = "pcieslot9";
@@ -1029,7 +1030,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@13 {
+		led@d {
 			reg = <13>;
 			default-state = "keep";
 			label = "pcieslot10";
@@ -1037,7 +1038,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@14 {
+		led@e {
 			reg = <14>;
 			default-state = "keep";
 			label = "pcieslot11";
@@ -1045,7 +1046,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@15 {
+		led@f {
 			reg = <15>;
 			default-state = "keep";
 			label = "tpm-wilson";
@@ -1231,8 +1232,9 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-			"", "", "", "", "", "", "", "",
-			"", "", "", "", "", "", "power-config-full-load", "";
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
 	};
 
 	led-controller@61 {
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
index 7364adc6b80d..a37399ff3cea 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -155,7 +155,7 @@
 		/*Y0-Y7*/	"","","","","","","","",
 		/*Z0-Z7*/	"","","","","","","","";
 
-	usb_power {
+	usb-power-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
 		output-high;
@@ -277,15 +277,11 @@
 		#size-cells = <0>;
 
 		fan0: fan@0 {
-			compatible = "pmbus-fan";
 			reg = <0>;
-			tach-pulses = <2>;
 		};
 
 		fan1: fan@1 {
-			compatible = "pmbus-fan";
 			reg = <1>;
-			tach-pulses = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index 513077a1f4be..5a0975d52492 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -312,7 +312,7 @@
 	/*Y0-Y7*/	"","","","","","","","",
 	/*Z0-Z7*/   "","","","","","","","";
 
-	usb_power {
+	usb-power-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
 		output-high;
@@ -353,6 +353,33 @@
 			"presence-base-op",
 			"";
 	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
 };
 
 &i2c1 {
@@ -2039,27 +2066,19 @@
 				reg = <0x52>;
 
 				fan@0 {
-					compatible = "pmbus-fan";
 					reg = <0>;
-					tach-pulses = <2>;
 				};
 
 				fan@1 {
-					compatible = "pmbus-fan";
 					reg = <1>;
-					tach-pulses = <2>;
 				};
 
 				fan@2 {
-					compatible = "pmbus-fan";
 					reg = <2>;
-					tach-pulses = <2>;
 				};
 
 				fan@3 {
-					compatible = "pmbus-fan";
 					reg = <3>;
-					tach-pulses = <2>;
 				};
 			};
 
@@ -2781,6 +2800,7 @@
 			#size-cells = <0>;
 
 			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2797,6 +2817,7 @@
 			};
 
 			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2813,8 +2834,8 @@
 			};
 
 			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -2830,8 +2851,8 @@
 			};
 
 			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3154,6 +3175,7 @@
 			#size-cells = <0>;
 
 			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3170,6 +3192,7 @@
 			};
 
 			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3186,8 +3209,8 @@
 			};
 
 			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3203,8 +3226,8 @@
 			};
 
 			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3527,6 +3550,7 @@
 			#size-cells = <0>;
 
 			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3543,6 +3567,7 @@
 			};
 
 			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3559,8 +3584,8 @@
 			};
 
 			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3576,8 +3601,8 @@
 			};
 
 			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3900,6 +3925,7 @@
 			#size-cells = <0>;
 
 			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3916,6 +3942,7 @@
 			};
 
 			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3932,8 +3959,8 @@
 			};
 
 			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3949,8 +3976,8 @@
 			};
 
 			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
index c24e464e5faa..9a43fc7bcebe 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
@@ -355,6 +355,33 @@
 			"presence-base-op",
 			"";
 	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
 };
 
 &i2c1 {
@@ -949,7 +976,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@10 {
+		led@a {
 			reg = <10>;
 			default-state = "keep";
 			label = "pcieslot-c10";
@@ -957,7 +984,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@11 {
+		led@b {
 			reg = <11>;
 			default-state = "keep";
 			label = "pcieslot-c11";
@@ -1058,7 +1085,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@10 {
+		led@a {
 			reg = <10>;
 			default-state = "keep";
 			label = "ddimm10";
@@ -1066,7 +1093,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@11 {
+		led@b {
 			reg = <11>;
 			default-state = "keep";
 			label = "ddimm11";
@@ -1074,7 +1101,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@12 {
+		led@c {
 			reg = <12>;
 			default-state = "keep";
 			label = "ddimm12";
@@ -1082,7 +1109,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@13 {
+		led@d {
 			reg = <13>;
 			default-state = "keep";
 			label = "ddimm13";
@@ -1090,7 +1117,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@14 {
+		led@e {
 			reg = <14>;
 			default-state = "keep";
 			label = "ddimm14";
@@ -1098,7 +1125,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@15 {
+		led@f {
 			reg = <15>;
 			default-state = "keep";
 			label = "ddimm15";
@@ -1195,7 +1222,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@10 {
+		led@a {
 			reg = <10>;
 			default-state = "keep";
 			label = "ddimm26";
@@ -1203,7 +1230,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@11 {
+		led@b {
 			reg = <11>;
 			default-state = "keep";
 			label = "ddimm27";
@@ -1211,7 +1238,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@12 {
+		led@c {
 			reg = <12>;
 			default-state = "keep";
 			label = "ddimm28";
@@ -1219,7 +1246,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@13 {
+		led@d {
 			reg = <13>;
 			default-state = "keep";
 			label = "ddimm29";
@@ -1227,7 +1254,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@14 {
+		led@e {
 			reg = <14>;
 			default-state = "keep";
 			label = "ddimm30";
@@ -1235,7 +1262,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@15 {
+		led@f {
 			reg = <15>;
 			default-state = "keep";
 			label = "ddimm31";
@@ -1332,7 +1359,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@10 {
+		led@a {
 			reg = <10>;
 			default-state = "keep";
 			label = "ddimm42";
@@ -1340,7 +1367,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@11 {
+		led@b {
 			reg = <11>;
 			default-state = "keep";
 			label = "ddimm43";
@@ -1348,7 +1375,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@12 {
+		led@c {
 			reg = <12>;
 			default-state = "keep";
 			label = "ddimm44";
@@ -1356,7 +1383,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@13 {
+		led@d {
 			reg = <13>;
 			default-state = "keep";
 			label = "ddimm45";
@@ -1364,7 +1391,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@14 {
+		led@e {
 			reg = <14>;
 			default-state = "keep";
 			label = "ddimm46";
@@ -1372,7 +1399,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@15 {
+		led@f {
 			reg = <15>;
 			default-state = "keep";
 			label = "ddimm47";
@@ -1469,7 +1496,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@10 {
+		led@a {
 			reg = <10>;
 			default-state = "keep";
 			label = "ddimm58";
@@ -1477,7 +1504,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@11 {
+		led@b {
 			reg = <11>;
 			default-state = "keep";
 			label = "ddimm59";
@@ -1485,7 +1512,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@12 {
+		led@c {
 			reg = <12>;
 			default-state = "keep";
 			label = "ddimm60";
@@ -1493,7 +1520,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@13 {
+		led@d {
 			reg = <13>;
 			default-state = "keep";
 			label = "ddimm61";
@@ -1501,7 +1528,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@14 {
+		led@e {
 			reg = <14>;
 			default-state = "keep";
 			label = "ddimm62";
@@ -1509,7 +1536,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@15 {
+		led@f {
 			reg = <15>;
 			default-state = "keep";
 			label = "ddimm63";
@@ -1598,7 +1625,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@10 {
+		led@a {
 			reg = <10>;
 			default-state = "keep";
 			label = "vrm6";
@@ -1606,7 +1633,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@11 {
+		led@b {
 			reg = <11>;
 			default-state = "keep";
 			label = "vrm7";
@@ -1614,7 +1641,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@12 {
+		led@c {
 			reg = <12>;
 			default-state = "keep";
 			label = "vrm12";
@@ -1622,7 +1649,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@13 {
+		led@d {
 			reg = <13>;
 			default-state = "keep";
 			label = "vrm13";
@@ -1630,7 +1657,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@14 {
+		led@e {
 			reg = <14>;
 			default-state = "keep";
 			label = "vrm14";
@@ -1638,7 +1665,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@15 {
+		led@f {
 			reg = <15>;
 			default-state = "keep";
 			label = "vrm15";
@@ -1727,7 +1754,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@10 {
+		led@a {
 			reg = <10>;
 			default-state = "keep";
 			label = "vrm2";
@@ -1735,7 +1762,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@11 {
+		led@b {
 			reg = <11>;
 			default-state = "keep";
 			label = "vrm3";
@@ -1743,7 +1770,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@12 {
+		led@c {
 			reg = <12>;
 			default-state = "keep";
 			label = "vrm8";
@@ -1751,7 +1778,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@13 {
+		led@d {
 			reg = <13>;
 			default-state = "keep";
 			label = "vrm9";
@@ -1759,7 +1786,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@14 {
+		led@e {
 			reg = <14>;
 			default-state = "keep";
 			label = "vrm10";
@@ -1767,7 +1794,7 @@
 			type = <PCA955X_TYPE_LED>;
 		};
 
-		led@15 {
+		led@f {
 			reg = <15>;
 			default-state = "keep";
 			label = "vrm11";
@@ -2118,7 +2145,7 @@
 					type = <PCA955X_TYPE_LED>;
 				};
 
-				led@10 {
+				led@a {
 					reg = <10>;
 					default-state = "keep";
 					label = "fan0";
@@ -2126,7 +2153,7 @@
 					type = <PCA955X_TYPE_LED>;
 				};
 
-				led@11 {
+				led@b {
 					reg = <11>;
 					default-state = "keep";
 					label = "fan1";
@@ -2134,7 +2161,7 @@
 					type = <PCA955X_TYPE_LED>;
 				};
 
-				led@12 {
+				led@c {
 					reg = <12>;
 					default-state = "keep";
 					label = "fan2";
@@ -2142,7 +2169,7 @@
 					type = <PCA955X_TYPE_LED>;
 				};
 
-				led@13 {
+				led@d {
 					reg = <13>;
 					default-state = "keep";
 					label = "fan3";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
index 0776b72c2199..e90421bf7e3a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -109,22 +109,22 @@
 		compatible = "gpio-leds";
 
 		/* BMC Card fault LED at the back */
-		bmc-ingraham0 {
+		led-bmc-ingraham0 {
 			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
 		};
 
 		/* Enclosure ID LED at the back */
-		rear-enc-id0 {
+		led-rear-enc-id0 {
 			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
 		};
 
 		/* Enclosure fault LED at the back */
-		rear-enc-fault0 {
+		led-rear-enc-fault0 {
 			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
 		};
 
 		/* PCIE slot power LED */
-		pcieslot-power {
+		led-pcieslot-power {
 			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
 		};
 	};
@@ -203,7 +203,7 @@
 	/*E0-E7*/	"","","","","","","","",
 	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
 	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","","",
 	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
 	/*J0-J7*/	"","","","","","","","",
 	/*K0-K7*/	"","","","","","","","",
@@ -211,7 +211,7 @@
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"","","","","","","","",
 	/*O0-O7*/	"","","","usb-power","","","","",
-	/*P0-P7*/	"","","","","pcieslot-power","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
 	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
 	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
 	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
@@ -224,14 +224,14 @@
 	/*Y0-Y7*/	"","","","","","","","",
 	/*Z0-Z7*/	"","","","","","","","";
 
-	i2c3_mux_oe_n {
+	i2c3-mux-oe-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "I2C3_MUX_OE_N";
 	};
 
-	usb_power {
+	usb-power-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
 		output-high;
@@ -263,7 +263,7 @@
 		reg = <0x51>;
 	};
 
-	tca_pres1: tca9554@20{
+	tca_pres1: tca9554@20 {
 		compatible = "ti,tca9554";
 		reg = <0x20>;
 		#address-cells = <1>;
@@ -1080,39 +1080,27 @@
 		#size-cells = <0>;
 
 		fan0: fan@0 {
-			compatible = "pmbus-fan";
 			reg = <0>;
-			tach-pulses = <2>;
 		};
 
 		fan1: fan@1 {
-			compatible = "pmbus-fan";
 			reg = <1>;
-			tach-pulses = <2>;
 		};
 
 		fan2: fan@2 {
-			compatible = "pmbus-fan";
 			reg = <2>;
-			tach-pulses = <2>;
 		};
 
 		fan3: fan@3 {
-			compatible = "pmbus-fan";
 			reg = <3>;
-			tach-pulses = <2>;
 		};
 
 		fan4: fan@4 {
-			compatible = "pmbus-fan";
 			reg = <4>;
-			tach-pulses = <2>;
 		};
 
 		fan5: fan@5 {
-			compatible = "pmbus-fan";
 			reg = <5>;
-			tach-pulses = <2>;
 		};
 	};
 
@@ -1280,8 +1268,9 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-			"", "", "", "", "", "", "", "",
-			"", "", "", "", "", "", "power-config-full-load", "";
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
 	};
 
 	pca_pres2: pca9552@61 {
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
new file mode 100644
index 000000000000..dbadba8eb698
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
@@ -0,0 +1,6086 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/i2c/i2c.h>
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "IBM SBP1";
+	compatible = "ibm,sbp1-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "LED_BMC_READY";
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			retain-state-suspended;
+			panic-indicator;
+		};
+
+		led-id-tpm {
+			label = "LED_ID_TPM";
+			gpios = <&smb_pex_vr_ctrl 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-bat {
+			label = "LED_ID_BAT";
+			gpios = <&smb_pex_vr_ctrl 16 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port2 {
+			label = "LED_ID_MGMT_PORT2";
+			gpios = <&smb_pex_vr_ctrl 17 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port1 {
+			label = "LED_ID_MGMT_PORT1";
+			gpios = <&smb_pex_vr_ctrl 18 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port1 {
+			label = "LED_ID_NIC1_PORT1";
+			gpios = <&smb_pex_vr_ctrl 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port2 {
+			label = "LED_ID_NIC1_PORT2";
+			gpios = <&smb_pex_vr_ctrl 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port1 {
+			label = "LED_ID_NIC2_PORT1";
+			gpios = <&smb_pex_vr_ctrl 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port2 {
+			label = "LED_ID_NIC2_PORT2";
+			gpios = <&smb_pex_vr_ctrl 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd2 {
+			label = "LED_ID_M2_SSD2";
+			gpios = <&smb_pex_vr_ctrl 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd1 {
+			label = "LED_ID_M2_SSD1";
+			gpios = <&smb_pex_vr_ctrl 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dwr-frnt-p {
+			label = "LED_ID_DWR_FRNT_P";
+			gpios = <&smb_svc_pex_cpu3_led 37 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-frnt {
+			label = "LED_PWR_DWR_FRNT";
+			gpios = <&smb_svc_pex_cpu3_led 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-back {
+			label = "LED_PWR_DWR_BACK";
+			gpios = <&smb_pex_vr_ctrl 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-dwr-back-p {
+			label = "LED_ID_DWR_BACK_P";
+			gpios = <&smb_pex_vr_ctrl 35 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-cpu0 {
+			label = "LED_ID_CPU0";
+			gpios = <&smb_svc_pex_cpu0_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu1 {
+			label = "LED_ID_CPU1";
+			gpios = <&smb_svc_pex_cpu1_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu2 {
+			label = "LED_ID_CPU2";
+			gpios = <&smb_svc_pex_cpu2_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu3 {
+			label = "LED_ID_CPU3";
+			gpios = <&smb_svc_pex_cpu3_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e2 {
+			label = "LED_ID_DIMM_C0E2";
+			gpios = <&smb_svc_pex_cpu0_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e1 {
+			label = "LED_ID_DIMM_C0E1";
+			gpios = <&smb_svc_pex_cpu0_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f2 {
+			label = "LED_ID_DIMM_C0F2";
+			gpios = <&smb_svc_pex_cpu0_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f1 {
+			label = "LED_ID_DIMM_C0F1";
+			gpios = <&smb_svc_pex_cpu0_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g2 {
+			label = "LED_ID_DIMM_C0G2";
+			gpios = <&smb_svc_pex_cpu0_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g1 {
+			label = "LED_ID_DIMM_C0G1";
+			gpios = <&smb_svc_pex_cpu0_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h2 {
+			label = "LED_ID_DIMM_C0H2";
+			gpios = <&smb_svc_pex_cpu0_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h1 {
+			label = "LED_ID_DIMM_C0H1";
+			gpios = <&smb_svc_pex_cpu0_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a2 {
+			label = "LED_ID_DIMM_C0A2";
+			gpios = <&smb_svc_pex_cpu0_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a1 {
+			label = "LED_ID_DIMM_C0A1";
+			gpios = <&smb_svc_pex_cpu0_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b2 {
+			label = "LED_ID_DIMM_C0B2";
+			gpios = <&smb_svc_pex_cpu0_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b1 {
+			label = "LED_ID_DIMM_C0B1";
+			gpios = <&smb_svc_pex_cpu0_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c2 {
+			label = "LED_ID_DIMM_C0C2";
+			gpios = <&smb_svc_pex_cpu0_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c1 {
+			label = "LED_ID_DIMM_C0C1";
+			gpios = <&smb_svc_pex_cpu0_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d2 {
+			label = "LED_ID_DIMM_C0D2";
+			gpios = <&smb_svc_pex_cpu0_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d1 {
+			label = "LED_ID_DIMM_C0D1";
+			gpios = <&smb_svc_pex_cpu0_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e2 {
+			label = "LED_ID_DIMM_C1E2";
+			gpios = <&smb_svc_pex_cpu1_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e1 {
+			label = "LED_ID_DIMM_C1E1";
+			gpios = <&smb_svc_pex_cpu1_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f2 {
+			label = "LED_ID_DIMM_C1F2";
+			gpios = <&smb_svc_pex_cpu1_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f1 {
+			label = "LED_ID_DIMM_C1F1";
+			gpios = <&smb_svc_pex_cpu1_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g2 {
+			label = "LED_ID_DIMM_C1G2";
+			gpios = <&smb_svc_pex_cpu1_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g1 {
+			label = "LED_ID_DIMM_C1G1";
+			gpios = <&smb_svc_pex_cpu1_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h2 {
+			label = "LED_ID_DIMM_C1H2";
+			gpios = <&smb_svc_pex_cpu1_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h1 {
+			label = "LED_ID_DIMM_C1H1";
+			gpios = <&smb_svc_pex_cpu1_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a2 {
+			label = "LED_ID_DIMM_C1A2";
+			gpios = <&smb_svc_pex_cpu1_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a1 {
+			label = "LED_ID_DIMM_C1A1";
+			gpios = <&smb_svc_pex_cpu1_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b2 {
+			label = "LED_ID_DIMM_C1B2";
+			gpios = <&smb_svc_pex_cpu1_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b1 {
+			label = "LED_ID_DIMM_C1B1";
+			gpios = <&smb_svc_pex_cpu1_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c2 {
+			label = "LED_ID_DIMM_C1C2";
+			gpios = <&smb_svc_pex_cpu1_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c1 {
+			label = "LED_ID_DIMM_C1C1";
+			gpios = <&smb_svc_pex_cpu1_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d2 {
+			label = "LED_ID_DIMM_C1D2";
+			gpios = <&smb_svc_pex_cpu1_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d1 {
+			label = "LED_ID_DIMM_C1D1";
+			gpios = <&smb_svc_pex_cpu1_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e2 {
+			label = "LED_ID_DIMM_C2E2";
+			gpios = <&smb_svc_pex_cpu2_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e1 {
+			label = "LED_ID_DIMM_C2E1";
+			gpios = <&smb_svc_pex_cpu2_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f2 {
+			label = "LED_ID_DIMM_C2F2";
+			gpios = <&smb_svc_pex_cpu2_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f1 {
+			label = "LED_ID_DIMM_C2F1";
+			gpios = <&smb_svc_pex_cpu2_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g2 {
+			label = "LED_ID_DIMM_C2G2";
+			gpios = <&smb_svc_pex_cpu2_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g1 {
+			label = "LED_ID_DIMM_C2G1";
+			gpios = <&smb_svc_pex_cpu2_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h2 {
+			label = "LED_ID_DIMM_C2H2";
+			gpios = <&smb_svc_pex_cpu2_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h1 {
+			label = "LED_ID_DIMM_C2H1";
+			gpios = <&smb_svc_pex_cpu2_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a2 {
+			label = "LED_ID_DIMM_C2A2";
+			gpios = <&smb_svc_pex_cpu2_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a1 {
+			label = "LED_ID_DIMM_C2A1";
+			gpios = <&smb_svc_pex_cpu2_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b2 {
+			label = "LED_ID_DIMM_C2B2";
+			gpios = <&smb_svc_pex_cpu2_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b1 {
+			label = "LED_ID_DIMM_C2B1";
+			gpios = <&smb_svc_pex_cpu2_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c2 {
+			label = "LED_ID_DIMM_C2C2";
+			gpios = <&smb_svc_pex_cpu2_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c1 {
+			label = "LED_ID_DIMM_C2C1";
+			gpios = <&smb_svc_pex_cpu2_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d2 {
+			label = "LED_ID_DIMM_C2D2";
+			gpios = <&smb_svc_pex_cpu2_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d1 {
+			label = "LED_ID_DIMM_C2D1";
+			gpios = <&smb_svc_pex_cpu2_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e2 {
+			label = "LED_ID_DIMM_C3E2";
+			gpios = <&smb_svc_pex_cpu3_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e1 {
+			label = "LED_ID_DIMM_C3E1";
+			gpios = <&smb_svc_pex_cpu3_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f2 {
+			label = "LED_ID_DIMM_C3F2";
+			gpios = <&smb_svc_pex_cpu3_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f1 {
+			label = "LED_ID_DIMM_C3F1";
+			gpios = <&smb_svc_pex_cpu3_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g2 {
+			label = "LED_ID_DIMM_C3G2";
+			gpios = <&smb_svc_pex_cpu3_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g1 {
+			label = "LED_ID_DIMM_C3G1";
+			gpios = <&smb_svc_pex_cpu3_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h2 {
+			label = "LED_ID_DIMM_C3H2";
+			gpios = <&smb_svc_pex_cpu3_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h1 {
+			label = "LED_ID_DIMM_C3H1";
+			gpios = <&smb_svc_pex_cpu3_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a2 {
+			label = "LED_ID_DIMM_C3A2";
+			gpios = <&smb_svc_pex_cpu3_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a1 {
+			label = "LED_ID_DIMM_C3A1";
+			gpios = <&smb_svc_pex_cpu3_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b2 {
+			label = "LED_ID_DIMM_C3B2";
+			gpios = <&smb_svc_pex_cpu3_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b1 {
+			label = "LED_ID_DIMM_C3B1";
+			gpios = <&smb_svc_pex_cpu3_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c2 {
+			label = "LED_ID_DIMM_C3C2";
+			gpios = <&smb_svc_pex_cpu3_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c1 {
+			label = "LED_ID_DIMM_C3C1";
+			gpios = <&smb_svc_pex_cpu3_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d2 {
+			label = "LED_ID_DIMM_C3D2";
+			gpios = <&smb_svc_pex_cpu3_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d1 {
+			label = "LED_ID_DIMM_C3D1";
+			gpios = <&smb_svc_pex_cpu3_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd01 {
+			label = "LED_ID_RSSD01";
+			gpios = <&smb_svc_pex_rssd01_16 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd02 {
+			label = "LED_ID_RSSD02";
+			gpios = <&smb_svc_pex_rssd01_16 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd03 {
+			label = "LED_ID_RSSD03";
+			gpios = <&smb_svc_pex_rssd01_16 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd04 {
+			label = "LED_ID_RSSD04";
+			gpios = <&smb_svc_pex_rssd01_16 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd05 {
+			label = "LED_ID_RSSD05";
+			gpios = <&smb_svc_pex_rssd01_16 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd06 {
+			label = "LED_ID_RSSD06";
+			gpios = <&smb_svc_pex_rssd01_16 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd07 {
+			label = "LED_ID_RSSD07";
+			gpios = <&smb_svc_pex_rssd01_16 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd08 {
+			label = "LED_ID_RSSD08";
+			gpios = <&smb_svc_pex_rssd01_16 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd09 {
+			label = "LED_ID_RSSD09";
+			gpios = <&smb_svc_pex_rssd01_16 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd10 {
+			label = "LED_ID_RSSD10";
+			gpios = <&smb_svc_pex_rssd01_16 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd11 {
+			label = "LED_ID_RSSD11";
+			gpios = <&smb_svc_pex_rssd01_16 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd12 {
+			label = "LED_ID_RSSD12";
+			gpios = <&smb_svc_pex_rssd01_16 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd13 {
+			label = "LED_ID_RSSD13";
+			gpios = <&smb_svc_pex_rssd01_16 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd14 {
+			label = "LED_ID_RSSD14";
+			gpios = <&smb_svc_pex_rssd01_16 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd15 {
+			label = "LED_ID_RSSD15";
+			gpios = <&smb_svc_pex_rssd01_16 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd16 {
+			label = "LED_ID_RSSD16";
+			gpios = <&smb_svc_pex_rssd01_16 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd17 {
+			label = "LED_ID_RSSD17";
+			gpios = <&smb_svc_pex_rssd17_32 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd18 {
+			label = "LED_ID_RSSD18";
+			gpios = <&smb_svc_pex_rssd17_32 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd19 {
+			label = "LED_ID_RSSD19";
+			gpios = <&smb_svc_pex_rssd17_32 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd20 {
+			label = "LED_ID_RSSD20";
+			gpios = <&smb_svc_pex_rssd17_32 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd21 {
+			label = "LED_ID_RSSD21";
+			gpios = <&smb_svc_pex_rssd17_32 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd22 {
+			label = "LED_ID_RSSD22";
+			gpios = <&smb_svc_pex_rssd17_32 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd23 {
+			label = "LED_ID_RSSD23";
+			gpios = <&smb_svc_pex_rssd17_32 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd24 {
+			label = "LED_ID_RSSD24";
+			gpios = <&smb_svc_pex_rssd17_32 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd25 {
+			label = "LED_ID_RSSD25";
+			gpios = <&smb_svc_pex_rssd17_32 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd26 {
+			label = "LED_ID_RSSD26";
+			gpios = <&smb_svc_pex_rssd17_32 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd27 {
+			label = "LED_ID_RSSD27";
+			gpios = <&smb_svc_pex_rssd17_32 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd28 {
+			label = "LED_ID_RSSD28";
+			gpios = <&smb_svc_pex_rssd17_32 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd29 {
+			label = "LED_ID_RSSD29";
+			gpios = <&smb_svc_pex_rssd17_32 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd30 {
+			label = "LED_ID_RSSD30";
+			gpios = <&smb_svc_pex_rssd17_32 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd31 {
+			label = "LED_ID_RSSD31";
+			gpios = <&smb_svc_pex_rssd17_32 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd32 {
+			label = "LED_ID_RSSD32";
+			gpios = <&smb_svc_pex_rssd17_32 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm01 {
+			label = "LED_ID_FAN_ASM01";
+			gpios = <&smb_svc_pex_rssd01_16 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm02 {
+			label = "LED_ID_FAN_ASM02";
+			gpios = <&smb_svc_pex_rssd01_16 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm03 {
+			label = "LED_ID_FAN_ASM03";
+			gpios = <&smb_svc_pex_rssd01_16 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm04 {
+			label = "LED_ID_FAN_ASM04";
+			gpios = <&smb_svc_pex_rssd01_16 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm05 {
+			label = "LED_ID_FAN_ASM05";
+			gpios = <&smb_svc_pex_rssd01_16 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm06 {
+			label = "LED_ID_FAN_ASM06";
+			gpios = <&smb_svc_pex_rssd01_16 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm07 {
+			label = "LED_ID_FAN_ASM07";
+			gpios = <&smb_svc_pex_rssd17_32 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm08 {
+			label = "LED_ID_FAN_ASM08";
+			gpios = <&smb_svc_pex_rssd17_32 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm09 {
+			label = "LED_ID_FAN_ASM09";
+			gpios = <&smb_svc_pex_rssd17_32 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm10 {
+			label = "LED_ID_FAN_ASM10";
+			gpios = <&smb_svc_pex_rssd17_32 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm11 {
+			label = "LED_ID_FAN_ASM11";
+			gpios = <&smb_svc_pex_rssd17_32 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm12 {
+			label = "LED_ID_FAN_ASM12";
+			gpios = <&smb_svc_pex_rssd17_32 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>, <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>, <&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2V5_aux_vd 0>, <&p3v3_rtc_vd 0>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2V5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p3v3_rtc_vd: voltage-divider8 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 231000/100000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <100>;
+		full-ohms = <231>;
+	};
+
+	thermistor0: thermistor-0 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor1: thermistor-1 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor2: thermistor-2 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 4>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor3: thermistor-3 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 5>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	p12v: fixedregulator-p12v {
+		compatible = "regulator-fixed";
+		regulator-name = "p12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p3v3_bmc_aux: fixedregulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p1v2_bmc_aux: fixedregulator-p1v2-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v2_bmc_aux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p12v-a-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_a>;
+	};
+
+	p12v-b-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_b>;
+	};
+
+	p12v-c-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_c>;
+	};
+
+	p12v-d-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_d>;
+	};
+
+	pvccinfaon-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu0>;
+	};
+
+	pvccfa-ehv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu0>;
+	};
+
+	pvnn-main-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu0>;
+	};
+
+	pvccin-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu0>;
+	};
+
+	pvccfa-ehv-fivra-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu0>;
+	};
+
+	pvccd-hv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu0>;
+	};
+
+	pvpp-hbm-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu0>;
+	};
+
+	pvccinfaon-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu1>;
+	};
+
+	pvccfa-ehv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu1>;
+	};
+
+	pvnn-main-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu1>;
+	};
+
+	pvccin-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu1>;
+	};
+
+	pvccfa-ehv-fivra-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu1>;
+	};
+
+	pvccd-hv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu1>;
+	};
+
+	pvpp-hbm-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu1>;
+	};
+
+	pvccinfaon-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu2>;
+	};
+
+	pvccfa-ehv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu2>;
+	};
+
+	pvnn-main-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu2>;
+	};
+
+	pvccin-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu2>;
+	};
+
+	pvccfa-ehv-fivra-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu2>;
+	};
+
+	pvccd-hv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu2>;
+	};
+
+	pvpp-hbm-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu2>;
+	};
+
+	pvccinfaon-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu3>;
+	};
+
+	pvccfa-ehv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu3>;
+	};
+
+	pvnn-main-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu3>;
+	};
+
+	pvccin-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu3>;
+	};
+
+	pvccfa-ehv-fivra-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu3>;
+	};
+
+	pvccd-hv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu3>;
+	};
+
+	pvpp-hbm-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu3>;
+	};
+
+	p1v05-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v05_pch_aux>;
+	};
+
+	p1v8-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_pch_aux>;
+	};
+
+	p3v3-pch-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_pch>;
+	};
+
+	p5v-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p5v>;
+	};
+
+	smb-m2-ssb-ssd2 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd2>;
+	};
+
+	smb-m2-ssb-ssd1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd1>;
+	};
+
+	ssb-rssd01-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd01>;
+	};
+
+	ssb-rssd01-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd01>;
+	};
+
+	ssb-rssd02-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd02>;
+	};
+
+	ssb-rssd02-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd02>;
+	};
+
+	ssb-rssd03-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd03>;
+	};
+
+	ssb-rssd03-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd03>;
+	};
+
+	ssb-rssd04-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd04>;
+	};
+
+	ssb-rssd04-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd04>;
+	};
+
+	ssb-rssd05-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd05>;
+	};
+
+	ssb-rssd05-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd05>;
+	};
+
+	ssb-rssd06-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd06>;
+	};
+
+	ssb-rssd06-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd06>;
+	};
+
+	ssb-rssd07-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd07>;
+	};
+
+	ssb-rssd07-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd07>;
+	};
+
+	ssb-rssd08-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd08>;
+	};
+
+	ssb-rssd08-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd08>;
+	};
+
+	ssb-rssd09-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd09>;
+	};
+
+	ssb-rssd09-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd09>;
+	};
+
+	ssb-rssd10-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd10>;
+	};
+
+	ssb-rssd10-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd10>;
+	};
+
+	ssb-rssd11-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd11>;
+	};
+
+	ssb-rssd11-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd11>;
+	};
+
+	ssb-rssd12-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd12>;
+	};
+
+	ssb-rssd12-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd12>;
+	};
+
+	ssb-rssd13-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd13>;
+	};
+
+	ssb-rssd13-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd13>;
+	};
+
+	ssb-rssd14-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd14>;
+	};
+
+	ssb-rssd14-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd14>;
+	};
+
+	ssb-rssd15-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd15>;
+	};
+
+	ssb-rssd15-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd15>;
+	};
+
+	ssb-rssd16-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd16>;
+	};
+
+	ssb-rssd16-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd16>;
+	};
+
+	ssb-rssd17-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd17>;
+	};
+
+	ssb-rssd17-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd17>;
+	};
+
+	ssb-rssd18-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd18>;
+	};
+
+	ssb-rssd18-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd18>;
+	};
+
+	ssb-rssd19-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd19>;
+	};
+
+	ssb-rssd19-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd19>;
+	};
+
+	ssb-rssd20-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd20>;
+	};
+
+	ssb-rssd20-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd20>;
+	};
+
+	ssb-rssd21-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd21>;
+	};
+
+	ssb-rssd21-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd21>;
+	};
+
+	ssb-rssd22-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd22>;
+	};
+
+	ssb-rssd22-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd22>;
+	};
+
+	ssb-rssd23-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd23>;
+	};
+
+	ssb-rssd23-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd23>;
+	};
+
+	ssb-rssd24-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd24>;
+	};
+
+	ssb-rssd24-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd24>;
+	};
+
+	ssb-rssd25-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd25>;
+	};
+
+	ssb-rssd25-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd25>;
+	};
+
+	ssb-rssd26-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd26>;
+	};
+
+	ssb-rssd26-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd26>;
+	};
+
+	ssb-rssd27-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd27>;
+	};
+
+	ssb-rssd27-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd27>;
+	};
+
+	ssb-rssd28-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd28>;
+	};
+
+	ssb-rssd28-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd28>;
+	};
+
+	ssb-rssd29-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd29>;
+	};
+
+	ssb-rssd29-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd29>;
+	};
+
+	ssb-rssd30-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd30>;
+	};
+
+	ssb-rssd30-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd30>;
+	};
+
+	ssb-rssd31-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd31>;
+	};
+
+	ssb-rssd31-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd31>;
+	};
+
+	ssb-rssd32-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd32>;
+	};
+
+	ssb-rssd32-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd32>;
+	};
+
+	p3v3-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_nic>;
+	};
+
+	p1v8-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_nic>;
+	};
+
+	p1v2-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v2_nic>;
+	};
+
+	pvcore-nic1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic1>;
+	};
+
+	pvcore-nic2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic2>;
+	};
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(V, 7) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default
+		     &pinctrl_adc5_default
+		     &pinctrl_adc6_default
+		     &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		     &pinctrl_adc9_default
+		     &pinctrl_adc10_default
+		     &pinctrl_adc11_default
+		     &pinctrl_adc12_default
+		     &pinctrl_adc13_default
+		     &pinctrl_adc15_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/* A0 - A7 */
+	"", "", "", "", "", "", "", "",
+	/* B0 - B7 */
+	"", "", "FM_ADR_TRIGGER_R_N", "RST_PLTRST_BUF_N", "BMC_TPM_RESET_N", "BMC_TPM_IRQ_N",
+	"PCH_TPM_RESET_N", "PCH_TPM_IRQ_N",
+	/* C0 - C7 */
+	"", "", "", "", "", "", "", "",
+	/* D0 - D7 */
+	"", "", "", "", "", "", "", "",
+	/* E0 - E7 */
+	"", "", "", "", "", "", "", "",
+	/* F0 - F7 */
+	"", "", "", "BMC_MUX_CPU1_RST_INT_N", "BMC_MUX_CPU2_RST_INT_N", "", "", "",
+	/* G0 - G7 */
+	"FM_SSD_CLK_DRVR1_EN", "FM_CK440Q_DEV_EN", "BMC_MAC1_RESET_N", "FM_DB2000_DEV_EN",
+	"FM_CPU_RMCA_LVT3_N", "FM_CPU_CATERR_LVT3_N", "FM_DBP_PRESENT_N", "",
+	/* H0 - H7 */
+	"SMB_SVC_PEX_RSSD17_32_INT", "LED_BMC_RDY", "RST_DBP_N", "", "", "", "", "",
+	/* I0 - I7 */
+	"JTAG_MUX_MODE_SEL", "JTAG_MUX_TRANS_ENBL", "JTAG_MUX_LSP_SEL5", "JTAG_MUX_MSTR_SEL",
+	"JTAG_MUX_LSP_SEL3", "", "JTAG_MUX_ENBL_N", "JTAG_MUX_RST_N",
+	/* J0 - J7 */
+	"", "", "", "", "", "", "", "",
+	/* K0 - K7 */
+	"", "", "", "", "", "", "", "",
+	/* L0 - L7 */
+	"", "", "", "", "RST_RTCRST_N", "RST_SRTCRST_N", "", "",
+	/* M0 - M7 */
+	"BMC_UART1_CTS_N", "BMC_UART1_DCD_N", "BMC_UART1_DSR_N", "BMC_UART1_RI_N",
+	"BMC_UART1_DTR_N", "BMC_UART1_RTS_N", "", "",
+	/* N0 - N7 */
+	"IRQ_BMC_PCH_NMI", "", "FM_PCH_BMC_THERMTRIP_N", "FM_BIOS_POST_CMPLT_N", "RST_PLTRST_N",
+	"FM_FLASH_SEC_OVRD", "FM_SMI_ACTIVE_N", "PWRGD_DBP",
+	/* O0 - O7 */
+	"CATERR_CPU2_EN", "H_LVT1_THERMTRIP_N", "CATERR_CPU3_EN", "SMB_SVC_PEX_CPU0_LED_INT",
+	"H_LVT1_MEMTRIP_N", "", "CATERR_CPU1_EN", "FM_PCH_ADR_COMPLETE_N",
+	/* P0 - P7 */
+	"PWRGD_SYS_PWROK", "PWRGD_PCH_PWROK", "BMC_MUX_CPU3_RST_INT_N", "BMC_MUX_SVC_RSSD_INT",
+	"FM_SLPS4_N", "IRQ_SML0_ALERT_N", "FM_SLPS3_N", "LED_BMC_HB",
+	/* Q0 - Q7 */
+	"", "PEX_BMC_RST", "PEX_VR_CTRL_RST", "PEX_NIC_RST", "PEX_CPU0_LED_RST", "PEX_CPU1_LED_RST",
+	"PEX_CPU2_LED_RST", "PEX_CPU3_LED_RST",
+	/* R0 - R7 */
+	"BMC_MUX_FANSSB_RSSD17_32_RST_INT_N", "BMC_MUX_FANPWM_RSSD01_16_RST_INT_N",
+	"BMC_MUX_SVC_VR_RST_INT_N", "BMC_MUX_NIC_RST_INT_N", "BMC_MUX_SVC_EXP_RST_INT_N",
+	"FM_CPU_ERR2_LVT3_N", "BMC_MUX_CPU0_RST_INT_N", "BMC_MUX_M2_RST_INT_N",
+	/* S0 - S7 */
+	"SMB_SVC_PEX_RSSD01_16_INT", "RST_PCH_RSMRST_R_N", "", "", "BMC_ROT_FPGA_RESET_N",
+	"FM_SSD_CLK_DRVR0_EN", "", "",
+	/* T0 - T7 */
+	"", "", "", "", "", "", "", "",
+	/* U0 - U7 */
+	"", "", "", "", "", "", "", "",
+	/* V0 - V7 */
+	"BMC_PEX_IRQ_INT", "RTC_BATT_TEST", "SMB_PEX_VR_CTRL_INT", "SMB_SVC_PEX_CPU3_LED_INT",
+	"PWRGD_CPUPWRGD", "SMB_SVC_PEX_CPU2_LED_INT", "SMB_SVC_PEX_CPU1_LED_INT",
+	"BMC_MAC0_RESET_N",
+	/* W0 - W7 */
+	"", "", "", "", "", "", "", "",
+	/* X0 - X7 */
+	"", "", "", "", "", "", "", "",
+	/* Y0 - Y7 */
+	"FM_THROTTLE_N", "FM_PASSWORD_CLEAR_N", "H_LVT3_CATERR_DLY_N", "FM_CPU_OL_INT_R_N", "", "",
+	"", "",
+	/* Z0 - Z7 */
+	"FM_CPU_ERR0_LVT3_N", "FM_CPU_ERR1_LVT3_N", "BMC_MUX_VR_PCH_CPU_RST_INT_N",
+	"JTAG_MUX_LSP_SEL1", "", "JTAG_MUX_LSP_SEL4", "JTAG_MUX_LSP_SEL2", "";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_unbiased_default>;
+};
+
+&pinctrl {
+	pinctrl_gpio0_unbiased_default: gpio_default {
+		pins = "AB15", "AD14", "R23", "A18", "AD24", "AD15", "AE14", "AC15", "U25", "AA24",
+		       "V24", "W26", "AA23", "V26", "U24", "V25", "AE15", "C15", "F15";
+		bias-disable;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	bmc_mux_nic: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_nic: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&gpio0 ASPEED_GPIO(Q, 3) GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <19 1>, <22 6>, <30 6>, <38 2>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"IRQ_NIC2_OVT_WRNG", "FM_NIC2_ALLSTANDBY_N", "IRQ_NIC2_OVT_SHTDN",
+				"SMB_VR_PVCORE_NIC2_ALERT_N", "FM_NIC2_PERST1_N",
+				"SMB_NIC2_ALERT_N", "FM_NIC2_PERST3_N", "FM_NIC2_PERST2_N",
+				/* GPORT1 */
+				"FM_NIC1_RST_N", "FM_NIC1_PERST0_N", "FM_NIC1_PERST2_N",
+				"FM_NIC1_PERST3_N", "SMB_NIC1_ALERT_N", "FM_NIC1_PERST1_N",
+				"SMB_VR_PVCORE_NIC1_ALERT_N", "IRQ_NIC1_OVT_SHTDN",
+				/* GPORT2 */
+				"SMB_VR_P3V3_NIC_ALERT_N", "FM_NIC2_FLASH_PRSNT",
+				"FM_NIC1_FLASH_PRSNT", "",
+				/* GPORT3 */
+				"FM_NIC2_PERST0_N", "FM_NIC2_RST_N", "", "", "", "", "", "",
+				/* GPORT4 */
+				"FM_NIC1_ALLSTANDBY_N", "IRQ_NIC1_OVT_WRNG", "", "", "", "", "", "",
+				/* GPORT5 */
+				"SMB_VR_P1V8_NIC_ALERT_N", "SMB_VR_P1V2_NIC_ALERT_N", "", "";
+
+				pinctrl-0 = <&U62160_pins>;
+				pinctrl-names = "default";
+				U62160_pins: cfg-pins {
+					pins = "gp03", "gp16", "gp20", "gp50", "gp51";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic2: ir38263-pvcore-nic2@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic2";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic1: ir38263-pvcore-nic1@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic1";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p3v3_nic: ir38263-p3v3-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p3v3_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v2_nic: ir38263-p1v2-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v2_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_nic: ir38263-p1v8-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2cmux1: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 7) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd1: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+				vss1-supply = <&p3v3_aux>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd1:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd1: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd1";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd2: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
+				vss1-supply = <&p3v3_aux>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd2:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd2: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd2";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	bmc-slave@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2cmux2: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(Z, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v05_pch_aux: ir38263-p1v05-pch-aux@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v05_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_pch_aux: ir38060-p1v8-pch-aux@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2cmux13: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 6) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu0_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu0_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU0", "PWRGD_CHC_CPU0",
+				"PWRGD_CHB_CPU0", "PWRGD_CHA_CPU0",
+				"PWRGD_CHE_CPU0", "PWRGD_CHF_CPU0",
+				"PWRGD_CHG_CPU0", "PWRGD_CHH_CPU0",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU0_ALERT_N", "SMB_VR_PVCCINFAON_CPU0_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU0_ALERT_N", "SMB_VR_PVCCD_HV_CPU0_ALERT_N",
+				"SMB_VR_PVCCIN_CPU0_ALERT_N", "SEL_SMB_DIMM_CPU0",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU0_AB_DRAM_G", "PWRGD_LVC3_CPU0_CD_DRAM_G",
+				"PWRGD_LVC3_CPU0_EF_DRAM_G", "PWRGD_LVC3_CPU0_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU0_DISABLE_COD_N", "",
+				"RST_LVC3_CPU0_RESET_N", "PWRGD_LVC3_CPU0_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU0_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU0_PROCHOT_N", "H_LVT3_CPU0_MEMHOT_IN_N",
+				"H_LVT3_CPU0_MEMHOT_OUT_N", "H_LVT3_CPU0_MEMTRIP_OUT_N",
+				"H_LVT3_CPU0_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU0_NMI", "FM_S3M_CPU0_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU0_PKG_ID0", "FM_CPU0_PKG_ID1",
+				"FM_CPU0_PROC_ID0", "FM_CPU0_PROC_ID1";
+
+				pinctrl-0 = <&U62080_pins>;
+				pinctrl-names = "default";
+				U62080_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu0@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu0: vout0 {
+						regulator-name = "pvccinfaon_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu0: vout {
+						regulator-name = "pvnn_main_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu0@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu0: vout0 {
+						regulator-name = "pvccin_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu0: vout {
+						regulator-name = "pvccd_hv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu0: vout {
+						regulator-name = "pvpp_hbm_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2cmux4: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(F, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu1_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu1_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU1", "PWRGD_CHC_CPU1",
+				"PWRGD_CHB_CPU1", "PWRGD_CHA_CPU1",
+				"PWRGD_CHE_CPU1", "PWRGD_CHF_CPU1",
+				"PWRGD_CHG_CPU1", "PWRGD_CHH_CPU1",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU1_ALERT_N", "SMB_VR_PVCCINFAON_CPU1_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU1_ALERT_N", "SMB_VR_PVCCD_HV_CPU1_ALERT_N",
+				"SMB_VR_PVCCIN_CPU1_ALERT_N", "SEL_SMB_DIMM_CPU1",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU1_AB_DRAM_G", "PWRGD_LVC3_CPU1_CD_DRAM_G",
+				"PWRGD_LVC3_CPU1_EF_DRAM_G", "PWRGD_LVC3_CPU1_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU1_DISABLE_COD_N", "",
+				"RST_LVC3_CPU1_RESET_N", "PWRGD_LVC3_CPU1_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU1_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU1_PROCHOT_N", "H_LVT3_CPU1_MEMHOT_IN_N",
+				"H_LVT3_CPU1_MEMHOT_OUT_N", "H_LVT3_CPU1_MEMTRIP_OUT_N",
+				"H_LVT3_CPU1_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU1_NMI", "FM_S3M_CPU1_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU1_PKG_ID0", "FM_CPU1_PKG_ID1",
+				"FM_CPU1_PROC_ID0", "FM_CPU1_PROC_ID1";
+
+				pinctrl-0 = <&U62090_pins>;
+				pinctrl-names = "default";
+				U62090_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu1@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu1: vout0 {
+						regulator-name = "pvccinfaon_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu1: vout {
+						regulator-name = "pvnn_main_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu1@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu1: vout0 {
+						regulator-name = "pvccin_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu1: vout {
+						regulator-name = "pvccd_hv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu1: vout {
+						regulator-name = "pvpp_hbm_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2cmux3: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu2_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu2_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU2", "PWRGD_CHC_CPU2",
+				"PWRGD_CHB_CPU2", "PWRGD_CHA_CPU2",
+				"PWRGD_CHE_CPU2", "PWRGD_CHF_CPU2",
+				"PWRGD_CHG_CPU2", "PWRGD_CHH_CPU2",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU2_ALERT_N", "SMB_VR_PVCCINFAON_CPU2_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU2_ALERT_N", "SMB_VR_PVCCD_HV_CPU2_ALERT_N",
+				"SMB_VR_PVCCIN_CPU2_ALERT_N", "SEL_SMB_DIMM_CPU2",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU2_AB_DRAM_G", "PWRGD_LVC3_CPU2_CD_DRAM_G",
+				"PWRGD_LVC3_CPU2_EF_DRAM_G", "PWRGD_LVC3_CPU2_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU2_DISABLE_COD_N", "",
+				"RST_LVC3_CPU2_RESET_N", "PWRGD_LVC3_CPU2_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU2_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU2_PROCHOT_N", "H_LVT3_CPU2_MEMHOT_IN_N",
+				"H_LVT3_CPU2_MEMHOT_OUT_N", "H_LVT3_CPU2_MEMTRIP_OUT_N",
+				"H_LVT3_CPU2_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU2_NMI", "FM_S3M_CPU2_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU2_PKG_ID0", "FM_CPU2_PKG_ID1",
+				"FM_CPU2_PROC_ID0", "FM_CPU2_PROC_ID1";
+
+				pinctrl-0 = <&U62100_pins>;
+				pinctrl-names = "default";
+				U62100_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu2@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu2: vout0 {
+						regulator-name = "pvccinfaon_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu2: vout {
+						regulator-name = "pvnn_main_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu2@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu2: vout0 {
+						regulator-name = "pvccin_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu2: vout {
+						regulator-name = "pvccd_hv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu2: vout {
+						regulator-name = "pvpp_hbm_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2cmux22: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(P, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu3_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu3_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU3", "PWRGD_CHC_CPU3",
+				"PWRGD_CHB_CPU3", "PWRGD_CHA_CPU3",
+				"PWRGD_CHE_CPU3", "PWRGD_CHF_CPU3",
+				"PWRGD_CHG_CPU3", "PWRGD_CHH_CPU3",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU3_ALERT_N", "SMB_VR_PVCCINFAON_CPU3_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU3_ALERT_N", "SMB_VR_PVCCD_HV_CPU3_ALERT_N",
+				"SMB_VR_PVCCIN_CPU3_ALERT_N", "SEL_SMB_DIMM_CPU3",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU3_AB_DRAM_G", "PWRGD_LVC3_CPU3_CD_DRAM_G",
+				"PWRGD_LVC3_CPU3_EF_DRAM_G", "PWRGD_LVC3_CPU3_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU3_DISABLE_COD_N", "",
+				"RST_LVC3_CPU3_RESET_N", "PWRGD_LVC3_CPU3_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU3_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU3_PROCHOT_N", "H_LVT3_CPU3_MEMHOT_IN_N",
+				"H_LVT3_CPU3_MEMHOT_OUT_N", "H_LVT3_CPU3_MEMTRIP_OUT_N",
+				"H_LVT3_CPU3_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU3_NMI", "FM_S3M_CPU3_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU3_PKG_ID0", "FM_CPU3_PKG_ID1",
+				"FM_CPU3_PROC_ID0", "FM_CPU3_PROC_ID1";
+
+				pinctrl-0 = <&U62110_pins>;
+				pinctrl-names = "default";
+				U62110_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu3@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu3: vout0 {
+						regulator-name = "pvccinfaon_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu3: vout {
+						regulator-name = "pvnn_main_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu3@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu3: vout0 {
+						regulator-name = "pvccin_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu3: vout {
+						regulator-name = "pvccd_hv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu3: vout {
+						regulator-name = "pvpp_hbm_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2cmux14: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux15: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 11 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux16: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux17: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 0 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux18: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux19: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd17_32: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 19 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD17_SMBRST_N", "RSSD18_SMBRST_N",
+				"RSSD19_SMBRST_N", "RSSD20_SMBRST_N",
+				"RSSD21_SMBRST_N", "RSSD22_SMBRST_N",
+				"RSSD23_SMBRST_N", "RSSD24_SMBRST_N",
+				/* GPORT1 */
+				"RSSD25_SMBRST_N", "RSSD26_SMBRST_N",
+				"RSSD27_SMBRST_N", "RSSD28_SMBRST_N",
+				"RSSD29_SMBRST_N", "RSSD30_SMBRST_N",
+				"RSSD31_SMBRST_N", "RSSD32_SMBRST_N",
+				/* GPORT2 */
+				"RSSD17_PWRDIS", "RSSD18_PWRDIS",
+				"RSSD19_PWRDIS", "RSSD20_PWRDIS",
+				/* GPORT3 */
+				"RSSD21_PWRDIS", "RSSD22_PWRDIS",
+				"RSSD23_PWRDIS", "RSSD24_PWRDIS",
+				"RSSD25_PWRDIS", "RSSD26_PWRDIS",
+				"RSSD27_PWRDIS", "RSSD28_PWRDIS",
+				/* GPORT4 */
+				"RSSD29_PWRDIS", "RSSD30_PWRDIS",
+				"RSSD31_PWRDIS", "RSSD32_PWRDIS",
+				"RSSD17_RESET_N", "RSSD18_RESET_N",
+				"RSSD19_RESET_N", "RSSD20_RESET_N",
+				/* GPORT5 */
+				"RSSD21_RESET_N", "RSSD22_RESET_N",
+				"RSSD23_RESET_N", "RSSD24_RESET_N",
+				"RSSD25_RESET_N", "RSSD26_RESET_N",
+				"RSSD27_RESET_N", "RSSD28_RESET_N",
+				/* GPORT6 */
+				"RSSD29_RESET_N", "RSSD30_RESET_N",
+				"RSSD31_RESET_N", "RSSD32_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux20: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 4 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux21: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 5 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2cmux5: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 0) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux6: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux7: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux8: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux9: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux10: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd_01_16: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 18 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD01_SMBRST_N", "RSSD02_SMBRST_N",
+				"RSSD03_SMBRST_N", "RSSD04_SMBRST_N",
+				"RSSD05_SMBRST_N", "RSSD06_SMBRST_N",
+				"RSSD07_SMBRST_N", "RSSD08_SMBRST_N",
+				/* GPORT1 */
+				"RSSD09_SMBRST_N", "RSSD10_SMBRST_N",
+				"RSSD11_SMBRST_N", "RSSD12_SMBRST_N",
+				"RSSD13_SMBRST_N", "RSSD14_SMBRST_N",
+				"RSSD15_SMBRST_N", "RSSD16_SMBRST_N",
+				/* GPORT2 */
+				"RSSD01_PWRDIS", "RSSD02_PWRDIS",
+				"RSSD03_PWRDIS", "RSSD04_PWRDIS",
+				/* GPORT3 */
+				"RSSD05_PWRDIS", "RSSD06_PWRDIS",
+				"RSSD07_PWRDIS", "RSSD08_PWRDIS",
+				"RSSD09_PWRDIS", "RSSD10_PWRDIS",
+				"RSSD11_PWRDIS", "RSSD12_PWRDIS",
+				/* GPORT4 */
+				"RSSD13_PWRDIS", "RSSD14_PWRDIS",
+				"RSSD15_PWRDIS", "RSSD16_PWRDIS",
+				"RSSD01_RESET_N", "RSSD02_RESET_N",
+				"RSSD03_RESET_N", "RSSD04_RESET_N",
+				/* GPORT5 */
+				"RSSD05_RESET_N", "RSSD06_RESET_N",
+				"RSSD07_RESET_N", "RSSD08_RESET_N",
+				"RSSD09_RESET_N", "RSSD10_RESET_N",
+				"RSSD11_RESET_N", "RSSD12_RESET_N",
+				/* GPORT6 */
+				"RSSD13_RESET_N", "RSSD14_RESET_N",
+				"RSSD15_RESET_N", "RSSD16_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux11: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux12: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 14 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2cmux23: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 4) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_bmc_aux>;
+	};
+};
+
+&i2cmux23 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_pex_vr_ctrl: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 2) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"BCM0_INPUT_DISABLE_N", "SMB_VR_P3V3_AUX_ALERT_N",
+			"SMB_PEX_CPU1_EVENT_INT", "SMB_PEX_CPU2_EVENT_INT",
+			"DPIC0_VOLTAGE_DETECTB_N", "DPIC0_VOLTAGE_DETECTA_N",
+			"DPIC1_VOLTAGE_DETECTA_N", "DPIC1_VOLTAGE_DETECTB_N",
+			/* GPORT1 */
+			"SMB_PEX_NIC_INT", "SMB_VR_P1V05_PCH_AUX_ALERT_N",
+			"SMB_PEX_CPU0_EVENT_INT", "SMB_PEX_CPU3_EVENT_INT",
+			"LED_ID_TPM", "PLUG_DETECT_TPM",
+			"PLUG_DETECT_M2_SSD_CARRIER1", "RST_M2_SSD1_PERST_N",
+			/* GPORT2 */
+			"LED_ID_BAT", "LED_ID_MGMT_PORT2",
+			"LED_ID_MGMT_PORT1", "SMB_VR_P5V_AUX_ALERT_N",
+			/* GPORT3 */
+			"SMB_VR_AUX_SSB_ALERT_N", "BCM1_INPUT_DISABLE_N",
+			"LED_ID_NIC1_PORT1", "LED_ID_NIC1_PORT2",
+			"LED_ID_NIC2_PORT1", "LED_ID_NIC2_PORT2",
+			"RST_M2_SSD2_PERST_N", "PLUG_DETECT_M2_SSD2",
+			/* GPORT4 */
+			"PLUG_DETECT_BAT", "PLUG_DETECT_M2_SSD1",
+			"M2_SSD1_SSB_ALERT_N", "BCM2_INPUT_DISABLE_N",
+			"SMB_VR_P1V8_PCH_AUX_ALERT_N", "BCM3_INPUT_DISABLE_N",
+			"LED_PWR_DWR_BACK", "LED_ID_DWR_BACK_P",
+			/* GPORT5 */
+			"LED_ID_M2_SSD2", "LED_ID_M2_SSD1",
+			"PLUG_DETECT_M2_SSD_CARRIER2", "M2_SSD2_SSB_ALERT_N";
+
+			pinctrl-0 = <&U62120_input &U62120_input_pullup>;
+			pinctrl-names = "default";
+			U62120_input: input-pins {
+				pins = "gp10";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+			U62120_input_pullup: input-pullup-pins {
+				pins = "gp01", "gp02", "gp03", "gp11", "gp12", "gp13",
+				"gp23", "gp30", "gp40", "gp42", "gp44", "gp53";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		bmc_pex_irq: pinctrl@20 {
+			compatible = "cypress,cy8c9520";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"SMB_MUX_PWM_FANGRP2_RST_INT_N", "SMB_MUX_SSB_FANGRP2_RST_INT_N",
+			"SMB_MUX_PWM_FANGRP1_RST_INT_N", "SMB_MUX_SSB_RSSD01_08_RST_INT_N",
+			"SMB_MUX_RSSD01_08_RST_INT_N", "SMB_MUX_RSSD09_16_RST_INT_N",
+			"SMB_PEX_RSSD01_16_INT", "SMB_MUX_SSB_FANGRP1_RST_INT_N",
+			/* GPORT1 */
+			"SMB_SVC_PEX_FAN_ALERT_INT", "SMB_MUX_SSB_RSSD09_16_RST_INT_N",
+			"SMB_MUX_SSB_RSSD17_24_RST_INT_N", "SMB_MUX_PWM_FANGRP0_RST_INT_N",
+			"SMB_MUX_RSSD17_24_RST_INT_N", "SMB_PEX_RSSD17_32_INT",
+			"SMB_MUX_RSSD25_32_RST_INT_N", "SMB_MUX_SSB_RSSD25_32_RST_INT_N",
+			/* GPORT2 */
+			"SMB_MUX_SSB_FANGRP0_RST_INT_N", "PEX_FAN_ALERT_RST",
+			"PEX_RSSD01_16_RST", "PEX_RSSD17_32_RST";
+			pinctrl-0 = <&U60000_pins>;
+			pinctrl-names = "default";
+			U60000_pins: cfg-pins {
+				pins = "gp06", "gp10", "gp15";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux24: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		eeprom@51 {
+			compatible = "atmel,24c32";
+			reg = <0x51>;
+			pagesize = <32>;
+			vcc-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux25: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2cmux25 {
+	reset-gpios = <&gpio0 ASPEED_GPIO(R, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+	vdd-supply = <&p3v3_bmc_aux>;
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p5v_aux: ir38263-p5v-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			regulator-name = "p5v_aux";
+			regulator-enable-ramp-delay = <2000>;
+			vin-supply = <&p12v>;
+			vbus-supply = <&p3v3_bmc_aux>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p3v3_aux: ir38263-p3v3-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			vin-supply = <&p12v>;
+			regulator-name = "p3v3_aux";
+			/*
+			 * 2msec for regulator + 18msec for board capacitance
+			 * Note: Every IC has a PTC which slowly charges the bypass
+			 * cap.
+			 */
+			regulator-enable-ramp-delay = <200000>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		aux_ssb: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_pex_vr_ctrl>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+			vss1-supply = <&p5v_aux>;
+			vss2-supply = <&p3v3_aux>;
+			regulators {
+				p5v: sw0 {
+					regulator-name = "p5v";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+				p3v3_pch: sw1 {
+					regulator-name = "p3v3_pch";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_a: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_a: vout2 {
+					regulator-name = "bcm0";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_b: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_b: vout2 {
+					regulator-name = "bcm1";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_c: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_c: vout2 {
+					regulator-name = "bcm2";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_d: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_d: vout2 {
+					regulator-name = "bcm3";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux24 {
+
+	reset-gpios = <&gpio0 ASPEED_GPIO(P, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		smb_svc_pex_rssd01_16: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu0_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD01", "LED_ID_RSSD02",
+			"LED_ID_RSSD03", "LED_ID_RSSD04",
+			"LED_ID_RSSD05", "LED_ID_RSSD06",
+			"LED_ID_RSSD07", "LED_ID_RSSD08",
+			/* GPORT1 */
+			"LED_ID_RSSD09", "LED_ID_RSSD10",
+			"LED_ID_RSSD11", "LED_ID_RSSD12",
+			"LED_ID_RSSD13", "LED_ID_RSSD14",
+			"LED_ID_RSSD15", "LED_ID_RSSD16",
+			/* GPORT2 */
+			"RSSD01_PRESENT_N", "RSSD02_PRESENT_N",
+			"RSSD03_PRESENT_N", "RSSD04_PRESENT_N",
+			/* GPORT3 */
+			"RSSD05_PRESENT_N", "RSSD06_PRESENT_N",
+			"RSSD07_PRESENT_N", "RSSD08_PRESENT_N",
+			"RSSD09_PRESENT_N", "RSSD10_PRESENT_N",
+			"RSSD11_PRESENT_N", "RSSD12_PRESENT_N",
+			/* GPORT4 */
+			"RSSD13_PRESENT_N", "RSSD14_PRESENT_N",
+			"RSSD15_PRESENT_N", "RSSD16_PRESENT_N",
+			"LED_ID_FAN_ASM01", "LED_ID_FAN_ASM02",
+			"LED_ID_FAN_ASM03", "LED_ID_FAN_ASM04",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM05", "LED_ID_FAN_ASM06",
+			"PLUG_DETECT_FAN_ASM01", "PLUG_DETECT_FAN_ASM02",
+			"PLUG_DETECT_FAN_ASM03", "PLUG_DETECT_FAN_ASM04",
+			"PLUG_DETECT_FAN_ASM05", "PLUG_DETECT_FAN_ASM06",
+			/* GPORT6 */
+			"SSB_RSSD01_ALERT_N", "SSB_RSSD02_ALERT_N",
+			"SSB_RSSD03_ALERT_N", "SSB_RSSD04_ALERT_N",
+			"SSB_RSSD05_ALERT_N", "SSB_RSSD06_ALERT_N",
+			"SSB_RSSD07_ALERT_N", "SSB_RSSD08_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD09_ALERT_N", "SSB_RSSD10_ALERT_N",
+			"SSB_RSSD11_ALERT_N", "SSB_RSSD12_ALERT_N",
+			"SSB_RSSD13_ALERT_N", "SSB_RSSD14_ALERT_N",
+			"SSB_RSSD15_ALERT_N", "SSB_RSSD16_ALERT_N";
+			pinctrl-0 = <&U65200_pins>;
+			pinctrl-names = "default";
+			U65200_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62", "gp63", "gp64",
+				       "gp65", "gp66", "gp67", "gp70", "gp71",
+				       "gp72", "gp73", "gp74", "gp75", "gp76",
+				       "gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_rssd17_32: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(H, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu1_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD17", "LED_ID_RSSD18",
+			"LED_ID_RSSD19", "LED_ID_RSSD20",
+			"LED_ID_RSSD21", "LED_ID_RSSD22",
+			"LED_ID_RSSD23", "LED_ID_RSSD24",
+			/* GPORT1 */
+			"LED_ID_RSSD25", "LED_ID_RSSD26",
+			"LED_ID_RSSD27", "LED_ID_RSSD28",
+			"LED_ID_RSSD29", "LED_ID_RSSD30",
+			"LED_ID_RSSD31", "LED_ID_RSSD32",
+			/* GPORT2 */
+			"RSSD17_PRESENT_N", "RSSD18_PRESENT_N",
+			"RSSD19_PRESENT_N", "RSSD20_PRESENT_N",
+			/* GPORT3 */
+			"RSSD21_PRESENT_N", "RSSD22_PRESENT_N",
+			"RSSD23_PRESENT_N", "RSSD24_PRESENT_N",
+			"RSSD25_PRESENT_N", "RSSD26_PRESENT_N",
+			"RSSD27_PRESENT_N", "RSSD28_PRESENT_N",
+			/* GPORT4 */
+			"RSSD29_PRESENT_N", "RSSD30_PRESENT_N",
+			"RSSD31_PRESENT_N", "RSSD32_PRESENT_N",
+			"LED_ID_FAN_ASM07", "LED_ID_FAN_ASM08",
+			"LED_ID_FAN_ASM09", "LED_ID_FAN_ASM10",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM11", "LED_ID_FAN_ASM12",
+			"PLUG_DETECT_FAN_ASM07", "PLUG_DETECT_FAN_ASM08",
+			"PLUG_DETECT_FAN_ASM09", "PLUG_DETECT_FAN_ASM10",
+			"PLUG_DETECT_FAN_ASM11", "PLUG_DETECT_FAN_ASM12",
+			/* GPORT6 */
+			"SSB_RSSD17_ALERT_N", "SSB_RSSD18_ALERT_N",
+			"SSB_RSSD19_ALERT_N", "SSB_RSSD20_ALERT_N",
+			"SSB_RSSD21_ALERT_N", "SSB_RSSD22_ALERT_N",
+			"SSB_RSSD23_ALERT_N", "SSB_RSSD24_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD25_ALERT_N", "SSB_RSSD26_ALERT_N",
+			"SSB_RSSD27_ALERT_N", "SSB_RSSD28_ALERT_N",
+			"SSB_RSSD29_ALERT_N", "SSB_RSSD30_ALERT_N",
+			"SSB_RSSD31_ALERT_N", "SSB_RSSD32_ALERT_N";
+			pinctrl-0 = <&U65300_pins>;
+			pinctrl-names = "default";
+			U65300_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62",
+				"gp63", "gp64", "gp65", "gp66",
+				"gp67", "gp70", "gp71", "gp72",
+				"gp73", "gp74", "gp75", "gp76",
+				"gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu1_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 6) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C1E2", "PLUG_DETECT_DIMM_C1E1",
+			"PLUG_DETECT_DIMM_C1F2", "PLUG_DETECT_DIMM_C1F1",
+			"PLUG_DETECT_DIMM_C1G2", "PLUG_DETECT_DIMM_C1G1",
+			"PLUG_DETECT_DIMM_C1H2", "PLUG_DETECT_DIMM_C1H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C1D1", "PLUG_DETECT_DIMM_C1D2",
+			"PLUG_DETECT_DIMM_C1C1", "PLUG_DETECT_DIMM_C1C2",
+			"PLUG_DETECT_DIMM_C1B1", "PLUG_DETECT_DIMM_C1B2",
+			"PLUG_DETECT_DIMM_C1A1", "PLUG_DETECT_DIMM_C1A2",
+			/* GPORT2 */
+			"PEX_CPU1_EVENT_RST", "SVC_PEX_RSSD17_32_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C1E2", "LED_ID_DIMM_C1E1",
+			"LED_ID_DIMM_C1F2", "LED_ID_DIMM_C1F1",
+			"LED_ID_DIMM_C1G2", "LED_ID_DIMM_C1G1",
+			"LED_ID_DIMM_C1H2", "LED_ID_DIMM_C1H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C1A2", "LED_ID_DIMM_C1A1",
+			"LED_ID_DIMM_C1B2", "LED_ID_DIMM_C1B1",
+			"LED_ID_DIMM_C1C2", "LED_ID_DIMM_C1C1",
+			"LED_ID_DIMM_C1D2", "LED_ID_DIMM_C1D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU1_SKTOCC_N", "LED_ID_CPU1";
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_fan_alert: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&bmc_pex_irq>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&bmc_pex_irq 17 GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <24 3>, <51 9>;
+			gpio-line-names =
+			/* GPORT0 */
+			"FAN01_SSB_ALERT_N", "FAN02_SSB_ALERT_N",
+			"FAN03_SSB_ALERT_N", "FAN04_SSB_ALERT_N",
+			"FAN05_SSB_ALERT_N", "FAN06_SSB_ALERT_N",
+			"FAN07_SSB_ALERT_N", "FAN08_SSB_ALERT_N",
+			/* GPORT1 */
+			"FAN09_SSB_ALERT_N", "FAN10_SSB_ALERT_N",
+			"FAN11_SSB_ALERT_N", "FAN12_SSB_ALERT_N",
+			"FAN13_SSB_ALERT_N", "FAN14_SSB_ALERT_N",
+			"FAN15_SSB_ALERT_N", "FAN16_SSB_ALERT_N",
+			/* GPORT2 */
+			"FAN17_SSB_ALERT_N", "FAN18_SSB_ALERT_N",
+			"FAN19_SSB_ALERT_N", "FAN20_SSB_ALERT_N",
+			/* GPORT3 */
+			"FAN21_SSB_ALERT_N", "FAN22_SSB_ALERT_N",
+			"FAN23_SSB_ALERT_N", "FAN24_SSB_ALERT_N",
+			"", "",
+			"", "FAN01_PWM_ALERT_N",
+			/* GPORT4 */
+			"FAN02_PWM_ALERT_N", "FAN03_PWM_ALERT_N",
+			"FAN04_PWM_ALERT_N", "FAN05_PWM_ALERT_N",
+			"FAN06_PWM_ALERT_N", "FAN07_PWM_ALERT_N",
+			"FAN08_PWM_ALERT_N", "FAN09_PWM_ALERT_N",
+			/* GPORT5 */
+			"FAN10_PWM_ALERT_N", "FAN11_PWM_ALERT_N",
+			"FAN12_PWM_ALERT_N", "FAN13_PWM_ALERT_N",
+			"FAN14_PWM_ALERT_N", "FAN15_PWM_ALERT_N",
+			"FAN16_PWM_ALERT_N", "FAN17_PWM_ALERT_N",
+			/* GPORT6 */
+			"FAN18_PWM_ALERT_N", "FAN19_PWM_ALERT_N",
+			"FAN20_PWM_ALERT_N", "FAN21_PWM_ALERT_N",
+			"FAN22_PWM_ALERT_N", "FAN23_PWM_ALERT_N",
+			"FAN24_PWM_ALERT_N", "",
+			/* GPORT7 */
+			"", "",
+			"", "",
+			"", "",
+			"", "";
+			pinctrl-0 = <&U65600_pins>;
+			pinctrl-names = "default";
+			U65600_pins: cfg-pins {
+				pins = "gp00", "gp01", "gp02",
+				"gp03", "gp04", "gp05", "gp06",
+				"gp07", "gp10", "gp11", "gp12",
+				"gp13", "gp14", "gp15", "gp16",
+				"gp17", "gp20", "gp21", "gp22",
+				"gp23", "gp30", "gp31", "gp32",
+				"gp33", "gp37", "gp40", "gp41",
+				"gp42", "gp43", "gp44", "gp45",
+				"gp46", "gp47", "gp50", "gp51",
+				"gp52", "gp53", "gp54", "gp55",
+				"gp56", "gp57", "gp60", "gp61",
+				"gp62", "gp63", "gp64", "gp65",
+				"gp66";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu2_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 5) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C2E2", "PLUG_DETECT_DIMM_C2E1",
+			"PLUG_DETECT_DIMM_C2F2", "PLUG_DETECT_DIMM_C2F1",
+			"PLUG_DETECT_DIMM_C2G2", "PLUG_DETECT_DIMM_C2G1",
+			"PLUG_DETECT_DIMM_C2H2", "PLUG_DETECT_DIMM_C2H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C2D1", "PLUG_DETECT_DIMM_C2D2",
+			"PLUG_DETECT_DIMM_C2C1", "PLUG_DETECT_DIMM_C2C2",
+			"PLUG_DETECT_DIMM_C2B1", "PLUG_DETECT_DIMM_C2B2",
+			"PLUG_DETECT_DIMM_C2A1", "PLUG_DETECT_DIMM_C2A2",
+			/* GPORT2 */
+			"PEX_CPU2_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C2E2", "LED_ID_DIMM_C2E1",
+			"LED_ID_DIMM_C2F2", "LED_ID_DIMM_C2F1",
+			"LED_ID_DIMM_C2G2", "LED_ID_DIMM_C2G1",
+			"LED_ID_DIMM_C2H2", "LED_ID_DIMM_C2H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C2A2", "LED_ID_DIMM_C2A1",
+			"LED_ID_DIMM_C2B2", "LED_ID_DIMM_C2B1",
+			"LED_ID_DIMM_C2C2", "LED_ID_DIMM_C2C1",
+			"LED_ID_DIMM_C2D2", "LED_ID_DIMM_C2D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU2_SKTOCC_N", "LED_ID_CPU2";
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		smb_svc_pex_cpu3_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C3E2", "PLUG_DETECT_DIMM_C3E1",
+			"PLUG_DETECT_DIMM_C3F2", "PLUG_DETECT_DIMM_C3F1",
+			"PLUG_DETECT_DIMM_C3G2", "PLUG_DETECT_DIMM_C3G1",
+			"PLUG_DETECT_DIMM_C3H2", "PLUG_DETECT_DIMM_C3H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C3D1", "PLUG_DETECT_DIMM_C3D2",
+			"PLUG_DETECT_DIMM_C3C1", "PLUG_DETECT_DIMM_C3C2",
+			"PLUG_DETECT_DIMM_C3B1", "PLUG_DETECT_DIMM_C3B2",
+			"PLUG_DETECT_DIMM_C3A1", "PLUG_DETECT_DIMM_C3A2",
+			/* GPORT2 */
+			"PEX_CPU3_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C3E2", "LED_ID_DIMM_C3E1",
+			"LED_ID_DIMM_C3F2", "LED_ID_DIMM_C3F1",
+			"LED_ID_DIMM_C3G2", "LED_ID_DIMM_C3G1",
+			"LED_ID_DIMM_C3H2", "LED_ID_DIMM_C3H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C3A2", "LED_ID_DIMM_C3A1",
+			"LED_ID_DIMM_C3B2", "LED_ID_DIMM_C3B1",
+			"LED_ID_DIMM_C3C2", "LED_ID_DIMM_C3C1",
+			"LED_ID_DIMM_C3D2", "LED_ID_DIMM_C3D1",
+			/* GPORT5 */
+			"LED_PWR_DWR_FRNT", "LED_ID_DWR_FRNT_P",
+			"FM_CPU3_SKTOCC_N", "LED_ID_CPU3";
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu0_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(O, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C0E2", "PLUG_DETECT_DIMM_C0E1",
+			"PLUG_DETECT_DIMM_C0F2", "PLUG_DETECT_DIMM_C0F1",
+			"PLUG_DETECT_DIMM_C0G2", "PLUG_DETECT_DIMM_C0G1",
+			"PLUG_DETECT_DIMM_C0H2", "PLUG_DETECT_DIMM_C0H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C0D1", "PLUG_DETECT_DIMM_C0D2",
+			"PLUG_DETECT_DIMM_C0C1", "PLUG_DETECT_DIMM_C0C2",
+			"PLUG_DETECT_DIMM_C0B1", "PLUG_DETECT_DIMM_C0B2",
+			"PLUG_DETECT_DIMM_C0A1", "PLUG_DETECT_DIMM_C0A2",
+			/* GPORT2 */
+			"PEX_CPU0_EVENT_RST", "SVC_PEX_RSSD01_16_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C0E2", "LED_ID_DIMM_C0E1",
+			"LED_ID_DIMM_C0F2", "LED_ID_DIMM_C0F1",
+			"LED_ID_DIMM_C0G2", "LED_ID_DIMM_C0G1",
+			"LED_ID_DIMM_C0H2", "LED_ID_DIMM_C0H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C0A2", "LED_ID_DIMM_C0A1",
+			"LED_ID_DIMM_C0B2", "LED_ID_DIMM_C0B1",
+			"LED_ID_DIMM_C0C2", "LED_ID_DIMM_C0C1",
+			"LED_ID_DIMM_C0D2", "LED_ID_DIMM_C0D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU0_SKTOCC_N", "LED_ID_CPU0";
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	p1v2_bmc_aux_mon: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+		max8952,default-mode = <3>;
+		max8952,dvs-mode-microvolt = <1100000>, <1100000>,
+					     <1100000>, <1100000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2cmux8 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan10_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan10_ssb: sw0 {
+					regulator-name = "fan10_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan12_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan12_ssb: sw0 {
+					regulator-name = "fan12_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan14_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan14_ssb: sw0 {
+					regulator-name = "fan14_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan16_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan16_ssb: sw0 {
+					regulator-name = "fan16_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan18_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan18_ssb: sw0 {
+					regulator-name = "fan18_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan20_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan20_ssb: sw0 {
+					regulator-name = "fan20_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan22_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan22_ssb: sw0 {
+					regulator-name = "fan22_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan24_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan24_ssb: sw0 {
+					regulator-name = "fan24_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux7 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan17_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan17_ssb: sw0 {
+					regulator-name = "fan17_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan19_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan19_ssb: sw0 {
+					regulator-name = "fan19_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan21_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan21_ssb: sw0 {
+					regulator-name = "fan21_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan23_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan23_ssb: sw0 {
+					regulator-name = "fan23_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan02_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan02_ssb: sw0 {
+					regulator-name = "fan02_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan04_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan04_ssb: sw0 {
+					regulator-name = "fan04_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan06_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan06_ssb: sw0 {
+					regulator-name = "fan06_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan08_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan08_ssb: sw0 {
+					regulator-name = "fan08_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux6 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan01_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan01_ssb: sw0 {
+					regulator-name = "fan01_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan03_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan03_ssb: sw0 {
+					regulator-name = "fan03_supply";
+
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan05_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan05_ssb: sw0 {
+					regulator-name = "fan05_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan07_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan07_ssb: sw0 {
+					regulator-name = "fan07_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan09_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan09_ssb: sw0 {
+					regulator-name = "fan09_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan11_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan11_ssb: sw0 {
+					regulator-name = "fan11_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan13_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan13_ssb: sw0 {
+					regulator-name = "fan13_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan15_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan15_ssb: sw0 {
+					regulator-name = "fan15_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+};
+
+&i2cmux9 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd19: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd19:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd19: sw0 {
+					regulator-name = "rssd19_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd19: sw1 {
+					regulator-name = "rssd19_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd18: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd18:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd18: sw0 {
+					regulator-name = "rssd18_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd18: sw1 {
+					regulator-name = "rssd18_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd17: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd17:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd17: sw0 {
+					regulator-name = "rssd17_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd17: sw1 {
+					regulator-name = "rssd17_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd20: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd20:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd20: sw0 {
+					regulator-name = "rssd20_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd20: sw1 {
+					regulator-name = "rssd20_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd21: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd21:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd21: sw0 {
+					regulator-name = "rssd21_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd21: sw1 {
+					regulator-name = "rssd21_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd22: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd22:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd22: sw0 {
+					regulator-name = "rssd22_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd22: sw1 {
+					regulator-name = "rssd22_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd24: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd24:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd24: sw0 {
+					regulator-name = "rssd24_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd24: sw1 {
+					regulator-name = "rssd24_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd23: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd23:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd23: sw0 {
+					regulator-name = "rssd23_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd23: sw1 {
+					regulator-name = "rssd23_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux10 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd25: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd25:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd25: sw0 {
+					regulator-name = "rssd25_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd25: sw1 {
+					regulator-name = "rssd25_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd26: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd26:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd26: sw0 {
+					regulator-name = "rssd26_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd26: sw1 {
+					regulator-name = "rssd26_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd27: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd27:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd27: sw0 {
+					regulator-name = "rssd27_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd27: sw1 {
+					regulator-name = "rssd27_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd32: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd32:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd32: sw0 {
+					regulator-name = "rssd32_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd32: sw1 {
+					regulator-name = "rssd32_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd31: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd31:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd31: sw0 {
+					regulator-name = "rssd31_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd31: sw1 {
+					regulator-name = "rssd31_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd30: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd30:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd30: sw0 {
+					regulator-name = "rssd30_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd30: sw1 {
+					regulator-name = "rssd30_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd29: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd29:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd29: sw0 {
+					regulator-name = "rssd29_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd29: sw1 {
+					regulator-name = "rssd29_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd28: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd28:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd28: sw0 {
+					regulator-name = "rssd28_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd28: sw1 {
+					regulator-name = "rssd28_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux18 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd03: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd03:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd03: sw0 {
+					regulator-name = "rssd03_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd03: sw1 {
+					regulator-name = "rssd03_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd02: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd02:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd02: sw0 {
+					regulator-name = "rssd02_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd02: sw1 {
+					regulator-name = "rssd02_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd01: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd01:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd01: sw0 {
+					regulator-name = "rssd01_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd01: sw1 {
+					regulator-name = "rssd01_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd04: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd04:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd04: sw0 {
+					regulator-name = "rssd04_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd04: sw1 {
+					regulator-name = "rssd04_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd05: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd05:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd05: sw0 {
+					regulator-name = "rssd05_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd05: sw1 {
+					regulator-name = "rssd05_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd08: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd08:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd08: sw0 {
+					regulator-name = "rssd08_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd08: sw1 {
+					regulator-name = "rssd08_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd07: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd07:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd07: sw0 {
+					regulator-name = "rssd07_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd07: sw1 {
+					regulator-name = "rssd07_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd06: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd06:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd06: sw0 {
+					regulator-name = "rssd06_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd06: sw1 {
+					regulator-name = "rssd06_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux19 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd14: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd14:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd14: sw0 {
+					regulator-name = "rssd14_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd14: sw1 {
+					regulator-name = "rssd14_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd13: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd13:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd13: sw0 {
+					regulator-name = "rssd13_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd13: sw1 {
+					regulator-name = "rssd13_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd12: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd12:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd12: sw0 {
+					regulator-name = "rssd12_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd12: sw1 {
+					regulator-name = "rssd12_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd11: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd11:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd11: sw0 {
+					regulator-name = "rssd11_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd11: sw1 {
+					regulator-name = "rssd11_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd10: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd10:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd10: sw0 {
+					regulator-name = "rssd10_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd10: sw1 {
+					regulator-name = "rssd10_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd09: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd09:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd09: sw0 {
+					regulator-name = "rssd09_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd09: sw1 {
+					regulator-name = "rssd09_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd15: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd15:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd15: sw0 {
+					regulator-name = "rssd15_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd15: sw1 {
+					regulator-name = "rssd15_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd16: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd16:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd16: sw0 {
+					regulator-name = "rssd16_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd16: sw1 {
+					regulator-name = "rssd16_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index f3efecc7eb8d..c8267c97a44e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -116,63 +116,63 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led-0 {
+		led-bmc-ready {
 			gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		led-1 {
+		led-bmc-hb {
 			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		led-2 {
+		led-rear-enc-fault0 {
 			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
 		};
 
-		led-3 {
+		led-rear-enc-id0 {
 			gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		led-4 {
+		led-fan0-fault {
 			gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
 		};
 
-		led-5 {
+		led-fan1-fault {
 			gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
 		};
 
-		led-6 {
+		led-fan2-fault {
 			gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
 		};
 
-		led-7 {
+		led-fan3-fault {
 			gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
 		};
 
-		led-8 {
+		led-fan4-fault {
 			gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
 		};
 
-		led-9 {
+		led-fan5-fault {
 			gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
 		};
 
-		led-a {
+		led-fan6-fault {
 			gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
 		};
 
-		led-b {
+		led-nvmed0-fault {
 			gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		led-c {
+		led-nvmed1-fault {
 			gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		led-d {
+		led-nvmed2-fault {
 			gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		led-e {
+		led-nvmed3-fault {
 			gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
 		};
 	};
@@ -355,7 +355,35 @@
 	status = "okay";
 };
 
+&pinctrl {
+	pinctrl_gpiol4_unbiased: gpiol4 {
+		pins = "C15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol5_unbiased: gpiol5 {
+		pins = "F15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol6_unbiased: gpiol6 {
+		pins = "B14";
+		bias-disable;
+	};
+
+	pinctrl_gpiol7_unbiased: gpiol7 {
+		pins = "C14";
+		bias-disable;
+	};
+};
+
 &gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiol4_unbiased
+		&pinctrl_gpiol5_unbiased
+		&pinctrl_gpiol6_unbiased
+		&pinctrl_gpiol7_unbiased>;
+
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
 	/*B0-B7*/	"","","","","bmc-tpm-reset","","","",
@@ -368,21 +396,49 @@
 	/*I0-I7*/	"","","","","","","","",
 	/*J0-J7*/	"","","","","","","","",
 	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","bmc-ready",
+	/*L0-L7*/	"","","","","","","","led-bmc-ready",
 	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
+	/*N0-N7*/	"pch-reset","","","","","flash-write-override","","",
 	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","bmc-hb",
-	/*Q0-Q7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","pch-ready","",
 	/*R0-R7*/	"","","","","","","","",
-	/*S0-S7*/	"","","","","","","rear-enc-fault0","rear-enc-id0",
+	/*S0-S7*/	"","","","","","","led-rear-enc-fault0","led-rear-enc-id0",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
 	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","power-chassis-good","","","","","","",
+	/*X0-X7*/	"fpga-pgood","power-chassis-good","pch-pgood","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
 	/*Z0-Z7*/	"","","","","","","","";
+
+	pin-gpio-hog-0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_RTCRST_N";
+	};
+
+	pin-gpio-hog-1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_SRTCRST_N";
+	};
+
+	pin-gpio-hog-2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_E3_SVC_PEX_INT_N";
+	};
+
+	pin-gpio-hog-3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 6) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "isolate_errs_cpu1";
+	};
 };
 
 &emmc_controller {
@@ -398,6 +454,12 @@
 	clk-phase-mmc-hs200 = <180>, <180>;
 };
 
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <500000>;
+};
+
 &ibt {
 	status = "okay";
 };
@@ -464,6 +526,15 @@
 	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 };
 
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -471,23 +542,6 @@
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
-
-	regulator@60 {
-		compatible = "maxim,max8952";
-		reg = <0x60>;
-
-		max8952,default-mode = <0>;
-		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-						<1050000>, <950000>;
-		max8952,sync-freq = <0>;
-		max8952,ramp-speed = <0>;
-
-		regulator-name = "VR_v77_1v4";
-		regulator-min-microvolt = <770000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
 };
 
 &i2c1 {
@@ -666,22 +720,22 @@
 	status = "okay";
 
 	power-supply@58 {
-		compatible = "ibm,cffps";
+		compatible = "intel,crps185";
 		reg = <0x58>;
 	};
 
 	power-supply@59 {
-		compatible = "ibm,cffps";
+		compatible = "intel,crps185";
 		reg = <0x59>;
 	};
 
 	power-supply@5a {
-		compatible = "ibm,cffps";
+		compatible = "intel,crps185";
 		reg = <0x5a>;
 	};
 
 	power-supply@5b {
-		compatible = "ibm,cffps";
+		compatible = "intel,crps185";
 		reg = <0x5b>;
 	};
 };
@@ -748,6 +802,15 @@
 
 &i2c4 {
 	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
 };
 
 &i2c5 {
@@ -1007,6 +1070,7 @@
 
 &i2c8 {
 	status = "okay";
+	bus-frequency = <400000>;
 
 	i2c-mux@71 {
 		compatible = "nxp,pca9548";
@@ -1173,23 +1237,6 @@
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
-
-	regulator@60 {
-		compatible = "maxim,max8952";
-		reg = <0x60>;
-
-		max8952,default-mode = <0>;
-		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-						<1050000>, <950000>;
-		max8952,sync-freq = <0>;
-		max8952,ramp-speed = <0>;
-
-		regulator-name = "VR_v77_1v4";
-		regulator-min-microvolt = <770000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
 };
 
 &i2c11 {
@@ -1468,6 +1515,7 @@
 
 &i2c15 {
 	status = "okay";
+	bus-frequency = <400000>;
 
 	i2c-mux@71 {
 		compatible = "nxp,pca9548";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
index 78a5656ef75d..79c6919b3570 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -54,10 +54,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
index ddbcbc64e235..4ad0f44af1ab 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
@@ -405,161 +405,161 @@
 
 &gpio {
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 	};
 
-	pin_gpio_f0 {
+	pin-gpio-f0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "IRQ_BMC_PCH_NMI_R";
 	};
 
-	pin_gpio_f3 {
+	pin-gpio-f3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_BUS0_RST_OUT_N";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_SKT0_FAULT_LED";
 	};
 
-	pin_gpio_f5 {
+	pin-gpio-f5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_SKT1_FAULT_LED";
 	};
 
-	pin_gpio_g4 {
+	pin-gpio-g4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FAN_PWR_CTL_N";
 	};
 
-	pin_gpio_g7 {
+	pin-gpio-g7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_BMC_PCIE_I2CMUX_N";
 	};
 
-	pin_gpio_h2 {
+	pin-gpio-h2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PSU1_FFS_N_R";
 	};
 
-	pin_gpio_h3 {
+	pin-gpio-h3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PSU2_FFS_N_R";
 	};
 
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_INTRUDED_COVER";
 	};
 
-	pin_gpio_j2 {
+	pin-gpio-j2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_BIOS_UPDATE_N";
 	};
 
-	pin_gpio_j3 {
+	pin-gpio-j3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_BMC_HDD_I2CMUX_N";
 	};
 
-	pin_gpio_s2 {
+	pin-gpio-s2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_VGA_SW";
 	};
 
-	pin_gpio_s4 {
+	pin-gpio-s4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
 		output;
 		line-name = "VBAT_EN_N";
 	};
 
-	pin_gpio_s6 {
+	pin-gpio-s6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PU_BMC_GPIOS6";
 	};
 
-	pin_gpio_y0 {
+	pin-gpio-y0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_NCSI_MUX_CTL_S0";
 	};
 
-	pin_gpio_y1 {
+	pin-gpio-y1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_NCSI_MUX_CTL_S1";
 	};
 
-	pin_gpio_z0 {
+	pin-gpio-z0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_RISER2_INT_N";
 	};
 
-	pin_gpio_z2 {
+	pin-gpio-z2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_RISER2_RESET_N";
 	};
 
-	pin_gpio_z3 {
+	pin-gpio-z3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_PCH_SCI_LPC_N";
 	};
 
-	pin_gpio_z7 {
+	pin-gpio-z7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_POST_CMPLT_N";
 	};
 
-	pin_gpio_aa0 {
+	pin-gpio-aa0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "HOST_BMC_USB_SEL";
 	};
 
-	pin_gpio_aa5 {
+	pin-gpio-aa5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
index 6045b60b80da..fdcf4492fb4e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
@@ -151,7 +151,7 @@
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
 
-&adc{
+&adc {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc0_default
@@ -211,7 +211,7 @@
 	status = "okay";
 	bus-frequency = <90000>;
 	HotSwap@10 {
-		compatible = "adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
@@ -425,238 +425,238 @@
 
 &gpio {
 
-	pin_gpio_a1 {
+	pin-gpio-a1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "BMC_EMMC_RST_N";
 	};
 
-	pin_gpio_a3 {
+	pin-gpio-a3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "PCH_PWROK_BMC_FPGA";
 	};
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 	};
 
-	pin_gpio_b7 {
+	pin-gpio-b7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "CPU_SM_WP";
 	};
 
-	pin_gpio_e0 {
+	pin-gpio-e0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "PDB_PSU_SEL";
 	};
 
-	pin_gpio_e2 {
+	pin-gpio-e2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "LOCATOR_LED_N";
 	};
 
-	pin_gpio_e5 {
+	pin-gpio-e5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_DBP_PRESENT_R1_N";
 	};
 
-	pin_gpio_e6 {
+	pin-gpio-e6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_ME_SECURITY_OVERRIDE_N";
 	};
 
-	pin_gpio_f0 {
+	pin-gpio-f0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_NMI_R";
 	};
 
-	pin_gpio_f1 {
+	pin-gpio-f1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU2_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_f2 {
+	pin-gpio-f2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RM_THROTTLE_EN_N";
 	};
 
-	pin_gpio_f3 {
+	pin-gpio-f3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_PMBUS_ALERT_B_EN";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FORCE_NM_THROTTLE_N";
 	};
 
-	pin_gpio_f6 {
+	pin-gpio-f6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_CPU_PWR_DEBUG_N";
 	};
 
-	pin_gpio_g7 {
+	pin-gpio-g7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_PCIE_I2C_MUX_RST_N";
 	};
 
-	pin_gpio_h6 {
+	pin-gpio-h6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_DBP_PRESENT_R2_N";
 	};
 
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPI_BMC_BIOS_WP_N";
 	};
 
-	pin_gpio_j1 {
+	pin-gpio-j1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_USB_SEL";
 	};
 
-	pin_gpio_j2 {
+	pin-gpio-j2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PDB_SMB_RST_N";
 	};
 
-	pin_gpio_j3 {
+	pin-gpio-j3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPI_BMC_BIOS_HOLD_N";
 	};
 
-	pin_gpio_l0 {
+	pin-gpio-l0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PDB_FAN_TACH_SEL";
 	};
 
-	pin_gpio_l1 {
+	pin-gpio-l1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SYS_RESET_BMC_FPGA_N";
 	};
 
-	pin_gpio_l4 {
+	pin-gpio-l4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_EFUSE_FAN_G1_EN";
 	};
 
-	pin_gpio_l5 {
+	pin-gpio-l5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_EFUSE_FAN_G2_EN";
 	};
 
-	pin_gpio_r6 {
+	pin-gpio-r6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU3_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_r7 {
+	pin-gpio-r7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU4_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_s1 {
+	pin-gpio-s1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "DBP_SYSPWROK_BMC";
 	};
 
-	pin_gpio_s2 {
+	pin-gpio-s2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PCH_RST_RSMRST_N";
 	};
 
-	pin_gpio_s6 {
+	pin-gpio-s6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_HW_STRAP_5";
 	};
 
-	pin_gpio_z3 {
+	pin-gpio-z3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_PCH_SCI_LPC_N";
 	};
 
-	pin_gpio_aa0 {
+	pin-gpio-aa0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FW_PSU_ALERT_EN_N";
 	};
 
-	pin_gpio_aa4 {
+	pin-gpio-aa4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "DBP_CPU_PREQ_N";
 	};
 
-	pin_gpio_ab3 {
+	pin-gpio-ab3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_WDTRST";
 	};
 
-	pin_gpio_ac6 {
+	pin-gpio-ac6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
new file mode 100644
index 000000000000..4de38613b0ea
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
@@ -0,0 +1,1178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "AST2600 GB200NVL BMC";
+	compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial2 = &uart3;
+		serial4 = &uart5;
+		i2c16   = &imux16;
+		i2c17   = &imux17;
+		i2c18   = &imux18;
+		i2c19   = &imux19;
+		i2c20   = &imux20;
+		i2c21   = &imux21;
+		i2c22   = &imux22;
+		i2c23   = &imux23;
+		i2c24   = &imux24;
+		i2c25   = &imux25;
+		i2c26   = &imux26;
+		i2c27   = &imux27;
+		i2c28   = &imux28;
+		i2c29   = &imux29;
+		i2c30   = &imux30;
+		i2c31   = &imux31;
+		i2c32   = &imux32;
+		i2c33   = &imux33;
+		i2c34   = &imux34;
+		i2c35   = &imux35;
+		i2c36   = &imux36;
+		i2c37   = &imux37;
+		i2c38   = &imux38;
+		i2c39   = &imux39;
+		i2c40	= &e1si2c0;
+		i2c41	= &e1si2c1;
+		i2c42	= &e1si2c2;
+		i2c43	= &e1si2c3;
+		i2c44	= &e1si2c4;
+		i2c45	= &e1si2c5;
+		i2c46	= &e1si2c6;
+		i2c47	= &e1si2c7;
+		i2c48	= &i2c17mux0;
+		i2c49	= &i2c17mux1;
+		i2c50	= &i2c17mux2;
+		i2c51	= &i2c17mux3;
+		i2c52	= &i2c25mux0;
+		i2c53	= &i2c25mux1;
+		i2c54	= &i2c25mux2;
+		i2c55	= &i2c25mux3;
+		i2c56	= &i2c29mux0;
+		i2c57	= &i2c29mux1;
+		i2c58	= &i2c29mux2;
+		i2c59	= &i2c29mux3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		ramoops@a0000000 {
+			compatible = "ramoops";
+			reg = <0xa0000000 0x100000>; /* 1MB */
+			record-size = <0x10000>; /* 64KB */
+			max-reason = <2>; /* KMSG_DUMP_OOPS */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "uid_led";
+			gpios = <&sgpiom0 27 GPIO_ACTIVE_LOW>;
+		};
+		led-1 {
+			label = "fault_led";
+			gpios = <&sgpiom0 29 GPIO_ACTIVE_LOW>;
+		};
+		led-2 {
+			label = "power_led";
+			gpios = <&sgpiom0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buttons {
+		button-power {
+			label = "power-btn";
+			gpio = <&sgpiom0 156 GPIO_ACTIVE_LOW>;
+		};
+		button-uid {
+			label = "uid-btn";
+			gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	standby_power_regulator: standby-power-regulator {
+		status = "okay";
+		compatible = "regulator-fixed";
+		regulator-name = "standby_power";
+		gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+// Enable Primary flash on FMC for bring up activity
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		compatible = "jedec,spi-nor";
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot@0 {
+				// 896KB
+				reg = <0x0 0xe0000>;
+				label = "u-boot";
+			};
+
+			kernel@100000 {
+				// 9MB
+				reg = <0x100000 0x900000>;
+				label = "kernel";
+			};
+
+			rofs@a00000 {
+				// 55292KB (extends to end of 64MB SPI - 4KB)
+				reg = <0xa00000 0x35FF000>;
+				label = "rofs";
+			};
+		};
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	// Data SPI is 64MB in size
+	flash@0 {
+		status = "okay";
+		label = "config";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot-env@0 {
+				// 256KB
+				reg = <0x0 0x40000>;
+				label = "u-boot-env";
+			};
+
+			rwfs@40000 {
+				// 16MB
+				reg = <0x40000 0x1000000>;
+				label = "rwfs";
+			};
+
+			log@1040000 {
+				// 40MB
+				reg = <0x1040000 0x2800000>;
+				label = "log";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	// Enabling SOL
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Debug Console
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	ethphy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+/*
+ * Enable USB port A as device (via the virtual hub) to host
+ */
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+// USB 2.0 to HMC, on USB Port B
+&ehci1 {
+	status = "okay";
+};
+
+// USB 1.0
+&uhci {
+	status = "okay";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RUN_POWER_FAULT_L-I","SYS_RST_IN_L-O",
+		"RUN_POWER_PG-I","PWR_BRAKE_L-O",
+		"SYS_RST_OUT_L-I","RUN_POWER_EN-O",
+		"L0L1_RST_REQ_OUT_L-I","SHDN_FORCE_L-O",
+		"L2_RST_REQ_OUT_L-I","SHDN_REQ_L-O",
+		"SHDN_OK_L-I","UID_LED_N-O",
+		"BMC_I2C1_FPGA_ALERT_L-I","SYS_FAULT_LED_N-O",
+		"BMC_I2C0_FPGA_ALERT_L-I","PWR_LED_N-O",
+		"FPGA_RSVD_FFU3-I","",
+		"FPGA_RSVD_FFU2-I","",
+		"FPGA_RSVD_FFU1-I","",
+		"FPGA_RSVD_FFU0-I","BMC_I2C_SSIF_ALERT_L-O",
+		"CPU_BOOT_DONE-I","JTAG_MUX_SELECT-O",
+		"SPI_BMC_FPGA_INT_L-I","RTC_CLR_L-O",
+		"THERM_BB_WARN_L-I","UART_MUX_SEL-O",
+		"THERM_BB_OVERT_L-I","",
+		"CPU0_UPHY3_PRSNT1_L-I","IOBRD0_RUN_POWER_EN-O",
+		"CPU0_UPHY3_PRSNT0_L-I","IOBRD1_RUN_POWER_EN-O",
+		"CPU0_UPHY2_PRSNT1_L-I","FPGA_RSVD_FFU4-O",
+		"CPU0_UPHY2_PRSNT0_L-I","FPGA_RSVD_FFU5-O",
+		"CPU0_UPHY1_PRSNT1_L-I","FPGA_RSVD_FFU6-O",
+		"CPU0_UPHY1_PRSNT0_L-I","FPGA_RSVD_FFU7-O",
+		"CPU0_UPHY0_PRSNT1_L-I","RSVD_NV_PLT_DETECT-O",
+		"CPU0_UPHY0_PRSNT0_L-I","SPI1_INT_L-O",
+		"CPU1_UPHY3_PRSNT1_L-I","",
+		"CPU1_UPHY3_PRSNT0_L-I","HMC_EROT_MUX_STATUS",
+		"CPU1_UPHY2_PRSNT1_L-I","",
+		"CPU1_UPHY2_PRSNT0_L-I","",
+		"CPU1_UPHY1_PRSNT1_L-I","",
+		"CPU1_UPHY1_PRSNT0_L-I","",
+		"CPU1_UPHY0_PRSNT1_L-I","",
+		"CPU1_UPHY0_PRSNT0_L-I","",
+		"FAN1_PRESENT_L-I","",
+		"FAN0_PRESENT_L-I","",
+		"","",
+		"IPEX_CABLE_PRSNT_L-I","",
+		"M2_1_PRSNT_L-I","",
+		"M2_0_PRSNT_L-I","",
+		"CPU1_UPHY4_PRSNT1_L-I","",
+		"CPU0_UPHY4_PRSNT0_L-I","",
+		"","",
+		"I2C_RTC_ALERT_L-I","",
+		"FAN7_PRESENT_L-I","",
+		"FAN6_PRESENT_L-I","",
+		"FAN5_PRESENT_L-I","",
+		"FAN4_PRESENT_L-I","",
+		"FAN3_PRESENT_L-I","",
+		"FAN2_PRESENT_L-I","",
+		"IOBRD0_IOX_INT_L-I","",
+		"IOBRD1_PRSNT_L-I","",
+		"IOBRD0_PRSNT_L-I","",
+		"IOBRD1_PWR_GOOD-I","",
+		"IOBRD0_PWR_GOOD-I","",
+		"","",
+		"","",
+		"FAN_FAIL_IN_L-I","",
+		"","",
+		"","",
+		"","",
+		"PDB_CABLE_PRESENT_L-I","",
+		"","",
+		"CHASSIS_PWR_BRK_L-I","",
+		"","",
+		"IOBRD1_IOX_INT_L-I","",
+		"10GBE_SMBALRT_L-I","",
+		"PCIE_WAKE_L-I","",
+		"I2C_M21_ALERT_L-I","",
+		"I2C_M20_ALERT_L-I","",
+		"TRAY_FAST_SHDN_L-I","",
+		"UID_BTN_N-I","",
+		"PWR_BTN_L-I","",
+		"PSU_SMB_ALERT_L-I","",
+		"","",
+		"","",
+		"NODE_LOC_ID[0]-I","",
+		"NODE_LOC_ID[1]-I","",
+		"NODE_LOC_ID[2]-I","",
+		"NODE_LOC_ID[3]-I","",
+		"NODE_LOC_ID[4]-I","",
+		"NODE_LOC_ID[5]-I","",
+		"FAN10_PRESENT_L-I","",
+		"FAN9_PRESENT_L-I","",
+		"FAN8_PRESENT_L-I","",
+		"FPGA1_READY_HMC-I","",
+		"DP_HPD-I","",
+		"HMC_I2C3_FPGA_ALERT_L-I","",
+		"HMC_I2C2_FPGA_ALERT_L-I","",
+		"FPGA0_READY_HMC-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"LEAK_DETECT_ALERT_L-I","",
+		"MOD1_B2B_CABLE_PRESENT_L-I","",
+		"MOD1_CLINK_CABLE_PRESENT_L-I","",
+		"FAN11_PRESENT_L-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RSVD_SGPIO_IN_CRC[0]","RSVD_SGPIO_O_CRC[7]",
+		"RSVD_SGPIO_IN_CRC[1]","RSVD_SGPIO_O_CRC[6]",
+		"RSVD_SGPIO_IN_CRC[2]","RSVD_SGPIO_O_CRC[5]",
+		"RSVD_SGPIO_IN_CRC[3]","RSVD_SGPIO_O_CRC[4]",
+		"RSVD_SGPIO_IN_CRC[4]","RSVD_SGPIO_O_CRC[3]",
+		"RSVD_SGPIO_IN_CRC[5]","RSVD_SGPIO_O_CRC[2]",
+		"RSVD_SGPIO_IN_CRC[6]","RSVD_SGPIO_O_CRC[1]",
+		"RSVD_SGPIO_IN_CRC[7]","RSVD_SGPIO_O_CRC[0]";
+};
+
+// I2C1, SSIF IPMI interface
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+// I2C2
+// BMC_I2C1_FPGA - Secondary FPGA
+// HMC EROT
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C3
+// BMC_I2C0_FPGA - Primary FPGA
+// HMC FRU EEPROM
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C4
+&i2c3 {
+	status = "okay";
+};
+
+// I2C5
+// RTC Driver
+// IO Expander
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x21
+	exp4: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"RTC_MUX_SEL-O",
+			"PCI_MUX_SEL-O",
+			"TPM_MUX_SEL-O",
+			"FAN_MUX-SEL-O",
+			"SGMII_MUX_SEL-O",
+			"DP_MUX_SEL-O",
+			"UPHY3_USB_SEL-O",
+			"NCSI_MUX_SEL-O",
+			"BMC_PHY_RST-O",
+			"RTC_CLR_L-O",
+			"BMC_12V_CTRL-O",
+			"PS_RUN_IO0_PG-I",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C6
+// Module 0/1 I2C MUX x3
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c17mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c17mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c17mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c17mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"RST_CX_0_L-O",
+					"RST_CX_1_L-O",
+					"CX0_SSD0_PRSNT_L-I",
+					"CX1_SSD1_PRSNT_L-I",
+					"CX_BOOT_CMPLT_CX0-I",
+					"CX_BOOT_CMPLT_CX1-I",
+					"CX_TWARN_CX0_L-I",
+					"CX_TWARN_CX1_L-I",
+					"CX_OVT_SHDN_CX0-I",
+					"CX_OVT_SHDN_CX1-I",
+					"FNP_L_CX0-O",
+					"FNP_L_CX1-O",
+					"",
+					"MCU_GPIO-I",
+					"MCU_RST_N-O",
+					"MCU_RECOVERY_N-O";
+			};
+		};
+
+		imux22: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+				vdd-supply = <&standby_power_regulator>;
+
+				i2c25mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c25mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c25mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c25mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c29mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c29mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c29mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c29mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"SEC_RST_CX_0_L-O",
+					"SEC_RST_CX_1_L-O",
+					"SEC_CX0_SSD0_PRSNT_L-I",
+					"SEC_CX1_SSD1_PRSNT_L-I",
+					"SEC_CX_BOOT_CMPLT_CX0-I",
+					"SEC_CX_BOOT_CMPLT_CX1-I",
+					"SEC_CX_TWARN_CX0_L-I",
+					"SEC_CX_TWARN_CX1_L-I",
+					"SEC_CX_OVT_SHDN_CX0-I",
+					"SEC_CX_OVT_SHDN_CX1-I",
+					"SEC_FNP_L_CX0-O",
+					"SEC_FNP_L_CX1-O",
+					"",
+					"SEC_MCU_GPIO-I",
+					"SEC_MCU_RST_N-O",
+					"SEC_MCU_RECOVERY_N-O";
+				};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C7
+// Module 0/1 Leak Sensors
+// Module 0/1 Fan Controllers
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pmic@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pmic@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pwm@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	pwm@23 {
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	pwm@2c {
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	pwm@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+// I2C9
+// M.2
+&i2c8 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C10
+// HMC IO Expander
+// Module 0/1 IO Expanders
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x20
+	exp0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB_HUB_RESET_L-O",
+			"NCSI_CS1_SEL-O",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	exp1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L-I",
+			"SEC_FPGA_READY_BMC-I",
+			"",
+			"",
+			"",
+			"",
+			"SEC_FPGA_EROT_FATAL_ERROR_L-I",
+			"SEC_WP_HW_EXT_CTRL_L-O",
+			"SEC_EROT_FPGA_RST_L-O",
+			"SEC_FPGA_EROT_RECOVERY_L-O",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"SEC_USB2_HUB_RST_L-O",
+			"",
+			"",
+			"",
+			"SEC_I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// HMC Expander @0x27
+	exp2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// HMC Expander @0x74
+	exp3: gpio@74 {
+		compatible = "nxp,pca9555";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"IOB_PRSNT_L",
+			"IOB_DP_HPD",
+			"IOX_BMC_RESET",
+			"IOB_IOEXP_INT_L",
+			"IOB_UID_LED_L",
+			"IOB_UID_BTN_L",
+			"IOB_SYS_RST_BTN_L",
+			"IOB_PWR_LED_L",
+			"IOB_PWR_BTN_L",
+			"IOB_PHY_RST",
+			"CPLD_JTAG_MUX_SEL",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C11
+// BMC FRU EEPROM
+// BMC Temp Sensor
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// BMC FRU EEPROM - 256 bytes
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+// I2C12
+&i2c11 {
+	status = "disabled";
+};
+
+// I2C13
+&i2c12 {
+	status = "disabled";
+};
+
+// I2C14
+// Module 0 UPHY3 SMBus
+&i2c13 {
+	status = "disabled";
+};
+
+// I2C15
+// Module 1 UPHY3 SMBus
+&i2c14 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 0-3
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C16
+&i2c15 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 4-7
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&rng {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "", "",
+		/*C0-C7*/ "SGPIO_I2C_MUX_SEL-O", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "UART1_MUX_SEL-O", "", "FPGA_PEX_RST_L-O", "", "",
+		/*E0-E7*/ "RTL8221_PHY_RST_L-O", "RTL8211_PHY_INT_L-I",	"", "UART3_MUX_SEL-O",
+					"", "", "", "SGPIO_BMC_EN-O",
+		/*F0-F7*/ "", "", "", "", "", "", "", "",
+		/*G0-G7*/ "", "", "", "", "", "", "", "",
+		/*H0-H7*/ "", "", "", "", "", "", "", "",
+		/*I0-I7*/ "", "", "", "", "", "QSPI2_RST_L-O", "GLOBAL_WP_BMC-O", "BMC_DDR4_TEN-O",
+		/*J0-J7*/ "", "", "", "", "", "", "", "",
+		/*K0-K7*/ "", "", "", "", "", "", "", "",
+		/*L0-L7*/ "", "", "", "", "", "", "", "",
+		/*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O",
+					"STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "",
+		/*N0-N7*/ "", "", "", "", "", "", "", "",
+		/*O0-O7*/ "", "", "", "", "", "", "", "",
+		/*P0-P7*/ "", "", "", "", "", "", "", "",
+		/*Q0-Q7*/ "", "", "", "", "", "", "", "",
+		/*R0-R7*/ "", "", "", "", "", "", "", "",
+		/*S0-S7*/ "", "", "", "", "", "", "", "",
+		/*T0-T7*/ "", "", "", "", "", "", "", "",
+		/*U0-U7*/ "", "", "", "", "", "", "", "",
+		/*V0-V7*/ "AP_EROT_REQ-O", "EROT_AP_GNT-I", "", "","PCB_TEMP_ALERT-I", "","", "",
+		/*W0-W7*/ "", "", "", "", "", "", "", "",
+		/*X0-X7*/ "", "", "TPM_MUX_SEL-O", "", "", "", "", "",
+		/*Y0-Y7*/ "", "", "", "EMMC_RST-O", "","", "", "",
+		/*Z0-Z7*/ "BMC_READY-O","", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	/* 36 1.8V GPIOs */
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "IO_EXPANDER_INT_L-I","",
+		/*C0-C7*/ "", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "", "", "", "SPI_HOST_TPM_RST_L-O", "SPI_BMC_FPGA_INT_L-I",
+		/*E0-E7*/ "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
index 370738572a55..9f2ad551255d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -52,18 +52,18 @@
 			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
 		};
 		bmc_err {
-			lable = "BMC_fault";
+			label = "BMC_fault";
 			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
 		};
 
 		sys_err {
-			lable = "Sys_fault";
+			label = "Sys_fault";
 			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 
@@ -264,49 +264,49 @@
 };
 
 &gpio {
-	pin_gpio_b0 {
+	pin-gpio-b0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_HDD1_PWR_EN";
 	};
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_USB1_OCI2";
 	};
 
-	pin_gpio_h5 {
+	pin-gpio-h5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_CP0_PERST_ENABLE_R";
 	};
 
-	pin_gpio_z2 {
+	pin-gpio-z2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_PCA9546_U177_N";
 	};
 
-	pin_gpio_aa6 {
+	pin-gpio-aa6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_CP0_RESET_N";
 	};
 
-	pin_gpio_aa7 {
+	pin-gpio-aa7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_TPM_RESET_N";
 	};
 
-	pin_gpio_ab0 {
+	pin-gpio-ab0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
index 31ff19ef87a0..6c8b966ffccc 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
@@ -165,7 +165,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
index b1d0ff85d397..ce6d30ddf07c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
@@ -77,10 +77,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
@@ -248,27 +247,27 @@
 	/*AB0-AB7*/	"","","","","","","","",
 	/*AC0-AC7*/	"","","","","","","","";
 
-	func_mode0 {
+	func-mode0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	func_mode1 {
+	func-mode1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	func_mode2 {
+	func-mode2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	seq_cont {
+	seq-cont-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	ncsi_cfg {
+	ncsi-cfg-hog {
 		gpio-hog;
 		input;
 		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
index 45631b47a7b3..7953059a6c67 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
@@ -55,7 +55,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2400-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
 
@@ -151,7 +151,7 @@
 	};
 
 	rtc@68 {
-		compatible = "dallas,ds3231";
+		compatible = "maxim,ds3231";
 		reg = <0x68>;
 	};
 };
@@ -209,140 +209,140 @@
 };
 
 &gpio {
-	pin_func_mode0 {
+	pin-func-mode0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode0";
 	};
 
-	pin_func_mode1 {
+	pin-func-mode1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode1";
 	};
 
-	pin_func_mode2 {
+	pin-func-mode2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode2";
 	};
 
-	pin_gpio_a0 {
+	pin-gpio-a0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_FAN_RESERVED_N";
 	};
 
-	pin_gpio_a1 {
+	pin-gpio-a1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_WDT_N";
 	};
 
-	pin_gpio_b1 {
+	pin-gpio-b1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_BOOT_MODE";
 	};
 
-	pin_gpio_b2 {
+	pin-gpio-b2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_RESET_N";
 	};
 
-	pin_gpio_b7 {
+	pin-gpio-b7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPIVID_STBY_RESET_N";
 	};
 
-	pin_gpio_d1 {
+	pin-gpio-d1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_POWER_UP";
 	};
 
-	pin_gpio_f1 {
+	pin-gpio-f1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_BATTERY_TEST";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "AST_HW_FAULT_N";
 	};
 
-	pin_gpio_f5 {
+	pin-gpio-f5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "AST_SYS_FAULT_N";
 	};
 
-	pin_gpio_f7 {
+	pin-gpio-f7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FULL_SPEED_N";
 	};
 
-	pin_gpio_g3 {
+	pin-gpio-g3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FAN_ERROR_N";
 	};
 
-	pin_gpio_g4 {
+	pin-gpio-g4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_WDT_RST1_P";
 	};
 
-	pin_gpio_g5 {
+	pin-gpio-g5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_WDT_RST2_P";
 	};
 
-	pin_gpio_h0 {
+	pin-gpio-h0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "PE_SLOT_TEST_EN_N";
 	};
 
-	pin_gpio_h1 {
+	pin-gpio-h1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_RTCRST_N";
 	};
 
-	pin_gpio_h2 {
+	pin-gpio-h2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SYS_PWROK_BMC";
 	};
 
-	pin_gpio_h7 {
+	pin-gpio-h7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
index 24df24ad9c80..a0263d969e51 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
@@ -68,10 +68,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
@@ -263,17 +262,17 @@
 	/*AB0-AB7*/	"","","","","","","","",
 	/*AC0-AC7*/	"","","","","","","","";
 
-	nic_func_mode0 {
+	nic-func-mode0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	nic_func_mode1 {
+	nic-func-mode1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	seq_cont {
+	seq-cont-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts
deleted file mode 100644
index a0e8c97e944a..000000000000
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts
+++ /dev/null
@@ -1,974 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Swift BMC";
-	compatible = "ibm,swift-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		event-air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(B, 5)>;
-		};
-
-		event-checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		event-ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(R, 7)>;
-		};
-
-		event-ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(N, 0)>;
-		};
-
-		event-oppanel-presence {
-			label = "oppanel-presence";
-			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(A, 7)>;
-		};
-
-		event-opencapi-riser-presence {
-			label = "opencapi-riser-presence";
-			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 0)>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		event-scm0-presence {
-			label = "scm0-presence";
-			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-scm1-presence {
-			label = "scm1-presence";
-			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		event-cpu0vrm-presence {
-			label = "cpu0vrm-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		event-cpu1vrm-presence {
-			label = "cpu1vrm-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		event-fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
-
-		event-fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		event-fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		event-fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-		};
-
-		event-fanboost-presence {
-			label = "fanboost-presence";
-			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fanboost {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
-		};
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		front-power {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
-		};
-
-		rear-fault {
-			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-id {
-			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
-	};
-
-	iio-hwmon-dps310 {
-		compatible = "iio-hwmon";
-		io-channels = <&dps 0>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x7F80000>;
-				label = "obmc-ubi";
-			};
-		};
-	};
-
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x7F80000>;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	use-ncsi;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* MUX ->
-	 *    Samtec 1
-	 *    Samtec 2
-	 */
-};
-
-&i2c3 {
-	status = "okay";
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@4 {
-			compatible = "pmbus-fan";
-			reg = <4>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps2";
-		reg = <0x68>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps2";
-		reg = <0x69>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	si7021a20@20 {
-		compatible = "si,si7021a20";
-		reg = <0x20>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca1: pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
-			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
-			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
-			"P9_SCM0_PRES",	"P9_SCM1_PRES",
-			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
-			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
-			"PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
-			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	pca2: pca9539@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	pca3: pca9539@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-};
-
-&i2c11 {
-	/* MUX
-	 *   -> PCIe Slot 0
-	 *   -> PCIe Slot 1
-	 *   -> PCIe Slot 2
-	 *   -> PCIe Slot 3
-	 */
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&sdmmc {
-       status = "okay";
-};
-
-&sdhci1 {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_sd2_default>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index b31eb8e58c6b..6fe7023599e8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -481,55 +481,19 @@
 		#size-cells = <0>;
 
 		fan@0 {
-			compatible = "pmbus-fan";
 			reg = <0>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
 		};
 
 		fan@1 {
-			compatible = "pmbus-fan";
 			reg = <1>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
 		};
 
 		fan@2 {
-			compatible = "pmbus-fan";
 			reg = <2>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
 		};
 
 		fan@3 {
-			compatible = "pmbus-fan";
 			reg = <3>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
index 8b1e82c8cdfe..89907b628b65 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -173,7 +173,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
index 9904f0a58cfa..af3a9d39d277 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -64,7 +64,7 @@
 			linux,code = <ASPEED_GPIO(F, 7)>;
 		};
 
-		event-pcie-e2b-present{
+		event-pcie-e2b-present {
 			label = "pcie-e2b-present";
 			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(E, 7)>;
@@ -96,7 +96,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
@@ -509,25 +509,25 @@
 	/*AB0-AB7*/	"","","","","","","","",
 	/*AC0-AC7*/	"","","","","","","","";
 
-	line_iso_u146_en {
+	line-iso-u146-en-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	ncsi_mux_en_n {
+	ncsi-mux-en-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
 
-	line_bmc_i2c2_sw_rst_n {
+	line-bmc-i2c2-sw-rst-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	line_bmc_i2c5_sw_rst_n {
+	line-bmc-i2c5-sw-rst-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
index 983853eedaef..86451227847b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -381,7 +381,7 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			U190_fru@51 {
+			eeprom@51 {
 				compatible = "atmel,24c128";
 				reg = <0x51>;
 				pagesize = <32>;
@@ -460,7 +460,7 @@
 	status = "okay";
 
 	/* MB FRU (U173) @ 0xA2 */
-	mb_fru: mb_fru@51 {
+	mb_fru: eeprom@51 {
 		compatible = "atmel,24c128";
 		reg = <0x51>;
 		pagesize = <32>;
@@ -472,7 +472,7 @@
 		reg = <0x4a>;
 	};
 
-	FP_U4_fru@52 {
+	eeprom@52 {
 		compatible = "atmel,24c02";
 		reg = <0x52>;
 		pagesize = <16>;
@@ -509,7 +509,7 @@
 			reg = <1>;
 
 			cpu0_pvccin@60 {
-				compatible = "isil,raa229004";
+				compatible = "renesas,raa229004";
 				reg = <0x60>;
 			};
 
@@ -530,7 +530,7 @@
 			reg = <2>;
 
 			cpu1_pvccin@72 {
-				compatible = "isil,raa229004";
+				compatible = "renesas,raa229004";
 				reg = <0x72>;
 			};
 
@@ -593,7 +593,7 @@
 	status = "okay";
 
 	/* SCM FRU (U19) @ 0xA2 */
-	scm_fru: scm_fru@51 {
+	scm_fru: eeprom@51 {
 		compatible = "atmel,24c128";
 		reg = <0x51>;
 		pagesize = <32>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
index b8f0b08018a3..98f3e0437704 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
@@ -154,7 +154,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <7>;
-					at24@50 {
+					eeprom@50 {
 						compatible = "atmel,24c64";
 						reg = <0x50>;
 						pagesize = <32>;
@@ -196,7 +196,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <7>;
-					at24@50 {
+					eeprom@50 {
 						compatible = "atmel,24c64";
 						reg = <0x50>;
 						pagesize = <32>;
@@ -205,7 +205,7 @@
 					};
 				};
 			};
-			at24@50 {
+			eeprom@50 {
 				compatible = "atmel,24c64";
 				reg = <0x50>;
 				pagesize = <32>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
index 1a5b25b2ea29..8c953e3a1d41 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
@@ -30,7 +30,7 @@
 			reusable;
 		};
 
-		ramoops@9eff0000{
+		ramoops@9eff0000 {
 			compatible = "ramoops";
 			reg = <0x9eff0000 0x10000>;
 			record-size = <0x2000>;
@@ -291,7 +291,7 @@
 	/* SMB_BMC_MGMT_LVC3 */
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 78c967812492..c3d4d916c69b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -356,7 +356,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 57a699a7c149..39500bdb4747 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -273,7 +273,6 @@
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2500-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
 				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
 				resets = <&syscon ASPEED_RESET_CRT1>;
 				syscon = <&syscon>;
@@ -441,7 +440,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
index 289668f051eb..e87c4b58994a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
@@ -412,6 +412,16 @@
 		groups = "MDIO4";
 	};
 
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+
 	pinctrl_ncts1_default: ncts1_default {
 		function = "NCTS1";
 		groups = "NCTS1";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 8ed715bd53aa..f8662c8ac089 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -382,7 +382,6 @@
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2600-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
 				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
 				resets = <&syscon ASPEED_RESET_GRAPHICS>;
 				syscon = <&syscon>;
@@ -572,7 +571,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -662,7 +660,7 @@
 				status = "disabled";
 
 				sdhci0: sdhci@1e740100 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x100 0x100>;
 					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
@@ -671,7 +669,7 @@
 				};
 
 				sdhci1: sdhci@1e740200 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x200 0x100>;
 					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
@@ -847,7 +845,7 @@
 
 			fsim0: fsi@1e79b000 {
 				#interrupt-cells = <1>;
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				compatible = "aspeed,ast2600-fsi-master";
 				reg = <0x1e79b000 0x94>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
@@ -859,7 +857,7 @@
 
 			fsim1: fsi@1e79b100 {
 				#interrupt-cells = <1>;
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				compatible = "aspeed,ast2600-fsi-master";
 				reg = <0x1e79b100 0x94>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 00e5887c926f..0ef225acddfc 100644
--- a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -31,9 +31,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		/*
+		 * chipselect pins are defined in platform .dts files
+		 * separately.
+		 */
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
 
 		tpm@0 {
 			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
@@ -152,18 +156,6 @@
 	status = "okay";
 };
 
-&emmc_controller {
-	status = "okay";
-};
-
-&emmc {
-	status = "okay";
-
-	non-removable;
-	max-frequency = <25000000>;
-	bus-width = <4>;
-};
-
 &rtc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
new file mode 100644
index 000000000000..efd92232cda2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 63 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x3f00000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (64MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@4000000 {
+		reg = <0x4000000 0x4000000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index 07ce3b2bc62a..06fac236773f 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -82,6 +82,7 @@
 			#size-cells = <0>;
 
 			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -98,6 +99,7 @@
 			};
 
 			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -114,8 +116,8 @@
 			};
 
 			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -131,8 +133,8 @@
 			};
 
 			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -249,6 +251,7 @@
 			#size-cells = <0>;
 
 			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -265,6 +268,7 @@
 			};
 
 			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -281,8 +285,8 @@
 			};
 
 			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -298,8 +302,8 @@
 			};
 
 			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
index 57494c744b5d..9501f66d0030 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
@@ -733,6 +733,7 @@
 			#size-cells = <0>;
 
 			cfam2_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -749,6 +750,7 @@
 			};
 
 			cfam2_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -765,8 +767,8 @@
 			};
 
 			cfam2_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -782,8 +784,8 @@
 			};
 
 			cfam2_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1106,6 +1108,7 @@
 			#size-cells = <0>;
 
 			cfam3_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1122,6 +1125,7 @@
 			};
 
 			cfam3_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1138,8 +1142,8 @@
 			};
 
 			cfam3_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1155,8 +1159,8 @@
 			};
 
 			cfam3_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
new file mode 100644
index 000000000000..6db02d475380
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 IBM Corp.
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		sbefifo100 = &sbefifo100;
+		sbefifo101 = &sbefifo101;
+		sbefifo110 = &sbefifo110;
+		sbefifo111 = &sbefifo111;
+		sbefifo112 = &sbefifo112;
+		sbefifo113 = &sbefifo113;
+		sbefifo114 = &sbefifo114;
+		sbefifo115 = &sbefifo115;
+		sbefifo202 = &sbefifo202;
+		sbefifo203 = &sbefifo203;
+		sbefifo210 = &sbefifo210;
+		sbefifo211 = &sbefifo211;
+		sbefifo214 = &sbefifo214;
+		sbefifo215 = &sbefifo215;
+		sbefifo216 = &sbefifo216;
+		sbefifo217 = &sbefifo217;
+
+		scom100 = &scom100;
+		scom101 = &scom101;
+		scom110 = &scom110;
+		scom111 = &scom111;
+		scom112 = &scom112;
+		scom113 = &scom113;
+		scom114 = &scom114;
+		scom115 = &scom115;
+		scom202 = &scom202;
+		scom203 = &scom203;
+		scom210 = &scom210;
+		scom211 = &scom211;
+		scom214 = &scom214;
+		scom215 = &scom215;
+		scom216 = &scom216;
+		scom217 = &scom217;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+	};
+};
+
+&fsim0 {
+	bus-frequency = <100000000>;
+	#address-cells = <2>;
+	#size-cells = <0>;
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom100: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo100: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom101: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo101: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom110: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo110: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom111: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo111: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom112: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo112: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom113: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo113: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom114: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo114: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom115: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo115: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom202: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo202: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom203: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo203: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom210: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo210: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom211: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo211: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom214: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo214: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom215: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo215: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom216: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo216: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom217: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo217: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
index 68c941a194b6..7aa4113d3026 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
@@ -1,24 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 // Copyright 2024 IBM Corp.
 
+#include "ibm-power11-dual.dtsi"
+
 / {
 	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c115 = &cfam0_i2c15;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c214 = &cfam1_i2c14;
-		i2c215 = &cfam1_i2c15;
-		i2c216 = &cfam1_i2c16;
-		i2c217 = &cfam1_i2c17;
 		i2c300 = &cfam2_i2c0;
 		i2c301 = &cfam2_i2c1;
 		i2c310 = &cfam2_i2c10;
@@ -36,22 +22,6 @@
 		i2c416 = &cfam3_i2c16;
 		i2c417 = &cfam3_i2c17;
 
-		sbefifo100 = &sbefifo100;
-		sbefifo101 = &sbefifo101;
-		sbefifo110 = &sbefifo110;
-		sbefifo111 = &sbefifo111;
-		sbefifo112 = &sbefifo112;
-		sbefifo113 = &sbefifo113;
-		sbefifo114 = &sbefifo114;
-		sbefifo115 = &sbefifo115;
-		sbefifo202 = &sbefifo202;
-		sbefifo203 = &sbefifo203;
-		sbefifo210 = &sbefifo210;
-		sbefifo211 = &sbefifo211;
-		sbefifo214 = &sbefifo214;
-		sbefifo215 = &sbefifo215;
-		sbefifo216 = &sbefifo216;
-		sbefifo217 = &sbefifo217;
 		sbefifo300 = &sbefifo300;
 		sbefifo301 = &sbefifo301;
 		sbefifo310 = &sbefifo310;
@@ -69,22 +39,6 @@
 		sbefifo416 = &sbefifo416;
 		sbefifo417 = &sbefifo417;
 
-		scom100 = &scom100;
-		scom101 = &scom101;
-		scom110 = &scom110;
-		scom111 = &scom111;
-		scom112 = &scom112;
-		scom113 = &scom113;
-		scom114 = &scom114;
-		scom115 = &scom115;
-		scom202 = &scom202;
-		scom203 = &scom203;
-		scom210 = &scom210;
-		scom211 = &scom211;
-		scom214 = &scom214;
-		scom215 = &scom215;
-		scom216 = &scom216;
-		scom217 = &scom217;
 		scom300 = &scom300;
 		scom301 = &scom301;
 		scom310 = &scom310;
@@ -102,14 +56,6 @@
 		scom416 = &scom416;
 		scom417 = &scom417;
 
-		spi10 = &cfam0_spi0;
-		spi11 = &cfam0_spi1;
-		spi12 = &cfam0_spi2;
-		spi13 = &cfam0_spi3;
-		spi20 = &cfam1_spi0;
-		spi21 = &cfam1_spi1;
-		spi22 = &cfam1_spi2;
-		spi23 = &cfam1_spi3;
 		spi30 = &cfam2_spi0;
 		spi31 = &cfam2_spi1;
 		spi32 = &cfam2_spi2;
@@ -121,718 +67,7 @@
 	};
 };
 
-&fsim0 {
-	#address-cells = <2>;
-	#size-cells = <0>;
-	status = "okay";
-	bus-frequency = <100000000>;
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam@0,0 {
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,p9-scom";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,i2c-fsi";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OMI01 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom100: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo100: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OMI23 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom101: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo101: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom110: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo110: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom111: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo111: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom112: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo112: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom113: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo113: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom114: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo114: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam0_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom115: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo115: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_spi0: spi@0 {
-				compatible = "ibm,spi-fsi";
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					compatible = "atmel,at25";
-					reg = <0>;
-					address-width = <24>;
-					pagesize = <256>;
-					size = <0x80000>;
-					spi-max-frequency = <10000000>;
-				};
-			};
-
-			cfam0_spi1: spi@20 {
-				compatible = "ibm,spi-fsi";
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					compatible = "atmel,at25";
-					reg = <0>;
-					address-width = <24>;
-					pagesize = <256>;
-					size = <0x80000>;
-					spi-max-frequency = <10000000>;
-				};
-			};
-
-			cfam0_spi2: spi@40 {
-				compatible = "ibm,spi-fsi";
-				reg = <0x40>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					compatible = "atmel,at25";
-					reg = <0>;
-					address-width = <24>;
-					pagesize = <256>;
-					size = <0x80000>;
-					spi-max-frequency = <10000000>;
-				};
-			};
-
-			cfam0_spi3: spi@60 {
-				compatible = "ibm,spi-fsi";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					compatible = "atmel,at25";
-					reg = <0>;
-					address-width = <24>;
-					pagesize = <256>;
-					size = <0x80000>;
-					spi-max-frequency = <10000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-
-			occ {
-				compatible = "ibm,p10-occ";
-
-				hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi_hub0: fsi@3400 {
-			compatible = "ibm,p9-fsi-controller";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-		};
-	};
-};
-
 &fsi_hub0 {
-	cfam@1,0 {
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,p9-scom";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,i2c-fsi";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OMI45 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom202: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo202: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OMI67 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom203: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo203: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom210: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo210: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom211: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo211: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom214: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo214: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam1_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom215: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo215: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam1_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom216: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo216: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-
-			cfam1_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fsi@20 {
-					compatible = "ibm,i2cr-fsi-master";
-					reg = <0x20>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-
-					cfam@0,0 {
-						reg = <0 0>;
-						#address-cells = <1>;
-						#size-cells = <1>;
-						chip-id = <0>;
-
-						scom217: scom@1000 {
-							compatible = "ibm,i2cr-scom";
-							reg = <0x1000 0x400>;
-						};
-
-						sbefifo217: sbefifo@2400 {
-							compatible = "ibm,odyssey-sbefifo";
-							reg = <0x2400 0x400>;
-						};
-					};
-				};
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_spi0: spi@0 {
-				compatible = "ibm,spi-fsi";
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					compatible = "atmel,at25";
-					reg = <0>;
-					address-width = <24>;
-					pagesize = <256>;
-					size = <0x80000>;
-					spi-max-frequency = <10000000>;
-				};
-			};
-
-			cfam1_spi1: spi@20 {
-				compatible = "ibm,spi-fsi";
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					compatible = "atmel,at25";
-					reg = <0>;
-					address-width = <24>;
-					pagesize = <256>;
-					size = <0x80000>;
-					spi-max-frequency = <10000000>;
-				};
-			};
-
-			cfam1_spi2: spi@40 {
-				compatible = "ibm,spi-fsi";
-				reg = <0x40>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					compatible = "atmel,at25";
-					reg = <0>;
-					address-width = <24>;
-					pagesize = <256>;
-					size = <0x80000>;
-					spi-max-frequency = <10000000>;
-				};
-			};
-
-			cfam1_spi3: spi@60 {
-				compatible = "ibm,spi-fsi";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					compatible = "atmel,at25";
-					reg = <0>;
-					address-width = <24>;
-					pagesize = <256>;
-					size = <0x80000>;
-					spi-max-frequency = <10000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-
-			occ {
-				compatible = "ibm,p10-occ";
-
-				hwmon {
-					compatible = "ibm,p10-occ-hwmon";
-					ibm,no-poll-on-init;
-				};
-			};
-		};
-
-		fsi@3400 {
-			compatible = "ibm,p9-fsi-controller";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			no-scan-on-init;
-		};
-	};
-
 	cfam@2,0 {
 		reg = <2 0>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
index 5881bcc95eba..2552e11b5e31 100644
--- a/arch/arm/boot/dts/broadcom/Makefile
+++ b/arch/arm/boot/dts/broadcom/Makefile
@@ -7,6 +7,7 @@ DTC_FLAGS_bcm2835-rpi-b-plus := -@
 DTC_FLAGS_bcm2835-rpi-a-plus := -@
 DTC_FLAGS_bcm2835-rpi-cm1-io1 := -@
 DTC_FLAGS_bcm2836-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-2-b := -@
 DTC_FLAGS_bcm2837-rpi-3-a-plus := -@
 DTC_FLAGS_bcm2837-rpi-3-b := -@
 DTC_FLAGS_bcm2837-rpi-3-b-plus := -@
@@ -25,6 +26,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2835-rpi-cm1-io1.dtb \
 	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-2-b.dtb \
 	bcm2837-rpi-3-a-plus.dtb \
 	bcm2837-rpi-3-b.dtb \
 	bcm2837-rpi-3-b-plus.dtb \
@@ -36,6 +38,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-zero.dtb \
 	bcm2835-rpi-zero-w.dtb
 dtb-$(CONFIG_ARCH_BCMBCA) += \
+	bcm6846-genexis-xg6846b.dtb \
 	bcm947622.dtb \
 	bcm963138.dtb \
 	bcm963138dvt.dtb \
@@ -48,6 +51,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
+	bcm4708-buffalo-wxr-1750dhp.dtb \
 	bcm4708-buffalo-wzr-1750dhp.dtb \
 	bcm4708-buffalo-wzr-1166dhp.dtb \
 	bcm4708-buffalo-wzr-1166dhp2.dtb \
diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
index 87180b7fd695..f535212cb52f 100644
--- a/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
@@ -46,6 +46,11 @@
 			interrupt-controller;
 		};
 
+		pinctrl: pinctrl@1004800 {
+			compatible = "brcm,bcm21664-pinctrl";
+			reg = <0x01004800 0x7f4>;
+		};
+
 		timer@1006000 {
 			compatible = "brcm,kona-timer";
 			reg = <0x01006000 0x1c>;
@@ -332,3 +337,5 @@
 		};
 	};
 };
+
+#include "bcm2166x-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
new file mode 100644
index 000000000000..51b8730c8fee
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common pinmux configrations for BCM2166x (BCM21664/BCM23550).
+ *
+ * Copyright (C) 2025 Artur Weber <aweber.kernel@gmail.com>
+ */
+
+&pinctrl {
+	/* BSC1 */
+	bsc1_pins: bsc1-pins {
+		bsc1clk-grp0 {
+			pins = "bsc1clk";
+			function = "alt1"; /* BSC1CLK */
+		};
+
+		bsc1dat-grp0 {
+			pins = "bsc1dat";
+			function = "alt1"; /* BSC1DAT */
+		};
+	};
+
+	/* BSC2 */
+	bsc2_pins: bsc2-pins {
+		bsc2clk-grp0 {
+			pins = "gpio16";
+			function = "alt2"; /* BSC2CLK */
+		};
+
+		bsc2dat-grp0 {
+			pins = "gpio17";
+			function = "alt2"; /* BSC2DAT */
+		};
+	};
+
+	/* BSC3 */
+	bsc3_pins: bsc3-pins {
+		bsc3clk-grp0 {
+			pins = "lcdscl";
+			function = "alt1"; /* BSC3_CLK */
+		};
+
+		bsc3dat-grp0 {
+			pins = "lcdsda";
+			function = "alt1"; /* BSC3_SDA */
+		};
+	};
+
+	/* BSC4 */
+	bsc4_pins: bsc4-pins {
+		bsc4clk-grp0 {
+			pins = "lcdres";
+			function = "alt1"; /* BSC4_CLK */
+		};
+
+		bsc4dat-grp0 {
+			pins = "lcdte";
+			function = "alt1"; /* BSC4_SDA */
+		};
+	};
+
+	/* PMBSC */
+	pmbsc_pins: pmbsc-pins {
+		pmbscclk-grp0 {
+			pins = "pmbscclk";
+			function = "alt1"; /* PMBSCCLK */
+		};
+
+		pmbscdat-grp0 {
+			pins = "pmbscdat";
+			function = "alt1"; /* PMBSCDAT */
+		};
+	};
+
+	/* SD */
+	sd_width1_pins: sd-width1-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	sd_width4_pins: sd-width4-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0", "sddat1", "sddat2", "sddat3";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	/* SD1 */
+	sd1_width1_pins: sd1-width1-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+	};
+
+	sd1_width4_pins: sd1-width4-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+
+		sd1dat1-grp0 {
+			pins = "gpio93";
+			function = "alt1"; /* SD1DAT1 */
+			bias-pull-up;
+		};
+
+		sd1dat2-grp0 {
+			pins = "gpio94";
+			function = "alt1"; /* SD1DAT2 */
+			bias-pull-up;
+		};
+
+		sd1dat3-grp0 {
+			pins = "mmc1dat3";
+			function = "alt6"; /* SD1DAT3 */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC0 */
+	mmc0_width1_pins: mmc0-width1-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width4_pins: mmc0-width4-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width8_pins: mmc0-width8-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3",
+			       "mmc0dat4", "mmc0dat5", "mmc0dat6", "mmc0dat7";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC1 */
+	mmc1_width1_pins: mmc1-width1-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width4_pins: mmc1-width4-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width8_pins: mmc1-width8-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3",
+			       "mmc1dat4", "mmc1dat5", "mmc1dat6", "mmc1dat7";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
index 6bf4241fe3b7..1eb6406449d1 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
 
-#include <dt-bindings/power/raspberrypi-power.h>
 #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
 
 / {
@@ -78,6 +77,14 @@
 	/delete-property/ pinctrl-0;
 };
 
+&pm {
+	clocks = <&firmware_clocks 5>,
+		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+		 <&clocks BCM2835_CLOCK_H264>,
+		 <&clocks BCM2835_CLOCK_ISP>;
+	clock-names = "v3d", "peri_image", "h264", "isp";
+};
+
 &rmem {
 	/*
 	 * RPi4's co-processor will copy the board's bootloader configuration
@@ -101,7 +108,3 @@
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
-
-&xhci {
-	power-domains = <&power RPI_POWER_DOMAIN_USB>;
-};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index e4e42af21ef3..c06d9f5e53c8 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -134,7 +134,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -145,7 +145,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -156,7 +156,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -167,7 +167,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -451,8 +451,6 @@
 					  IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 					  IRQ_TYPE_LEVEL_LOW)>;
-		/* This only applies to the ARMv7 stub */
-		arm,cpu-registers-not-fw-configured;
 	};
 
 	cpus: cpus {
@@ -610,6 +608,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_USB>;
 			/* DWC2 and this IP block share the same USB PHY,
 			 * enabling both at the same time results in lockups.
 			 * So keep this node disabled and let the bootloader
@@ -1177,6 +1176,7 @@
 };
 
 &uart0 {
+	arm,primecell-periphid = <0x00341011>;
 	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 };
 
diff --git a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
index 2f3634545e64..cefaa9a3c45c 100644
--- a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
@@ -37,7 +37,39 @@
 	status = "okay";
 
 	pmu: pmu@8 {
+		compatible = "brcm,bcm59056";
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x08>;
+
+		regulators {
+			camldo1_reg: camldo1 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sdldo_reg: sdldo {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			sdxldo_reg: sdxldo {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			usbldo_reg: usbldo {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			iosr1_reg: iosr1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
 	};
 };
 
@@ -74,39 +106,3 @@
 &usbphy {
 	status = "okay";
 };
-
-#include "bcm59056.dtsi"
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-	regulators {
-		camldo1_reg: camldo1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdldo_reg: sdldo {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		sdxldo_reg: sdxldo {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		usbldo_reg: usbldo {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		iosr1_reg: iosr1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
index 8b3c21d9f333..fa9d784c88b6 100644
--- a/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
@@ -13,7 +13,16 @@
 	clock-names = "pixel", "hdmi";
 };
 
+&pm {
+	clocks = <&firmware_clocks 5>,
+		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+		 <&clocks BCM2835_CLOCK_H264>,
+		 <&clocks BCM2835_CLOCK_ISP>;
+	clock-names = "v3d", "peri_image", "h264", "isp";
+};
+
 &v3d {
+	clocks = <&firmware_clocks 5>;
 	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
 };
 
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
new file mode 100644
index 000000000000..1868cee05853
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837";
+	model = "Raspberry Pi 2 Model B rev 1.2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETH_CLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
new file mode 100644
index 000000000000..f5c95c9a712e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Taishi Shimizu <s.taishi14142@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "buffalo,wxr-1750dhp", "brcm,bcm4708";
+	model = "Buffalo WXR-1750DHP";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-aoss {
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		/* GPIO 3 is a switch button with AUTO / MANUAL. */
+		button-manual {
+			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+			label = "MANUAL";
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-restart {
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+		};
+
+		/* GPIO 8 and 9 are a tri-state switch button with
+		 * ROUTER / AP / WB.
+		 */
+		button-router {
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			label = "ROUTER";
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-wb {
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+			label = "WB";
+			linux,code = <BTN_2>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-internet {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "internet";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "router";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "router";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&xhci_port1 &ehci_port1 &ohci_port1>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
index 53cb0c58f6d0..3da2daee0c84 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -124,19 +124,19 @@
 		};
 
 		port@1 {
-			label = "lan1";
+			label = "lan4";
 		};
 
 		port@2 {
-			label = "lan2";
+			label = "lan3";
 		};
 
 		port@3 {
-			label = "lan3";
+			label = "lan2";
 		};
 
 		port@4 {
-			label = "lan4";
+			label = "lan1";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
index 6c666dc7ad23..01ec8c03686a 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
@@ -126,11 +126,11 @@
 
 	ports {
 		port@0 {
-			label = "lan4";
+			label = "wan";
 		};
 
 		port@1 {
-			label = "lan3";
+			label = "lan1";
 		};
 
 		port@2 {
@@ -138,11 +138,11 @@
 		};
 
 		port@3 {
-			label = "lan1";
+			label = "lan3";
 		};
 
 		port@4 {
-			label = "wan";
+			label = "lan4";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
index ac44c745bdf8..a39a021a3910 100644
--- a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -55,8 +55,8 @@
 	mdio {
 		/delete-node/ switch@1e;
 
-		bcm54210e: ethernet-phy@0 {
-			reg = <0>;
+		bcm54210e: ethernet-phy@25 {
+			reg = <25>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
index 0bf5106f7012..08abfdc63d18 100644
--- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
@@ -59,6 +59,9 @@
 
 &gmac0 {
 	status = "okay";
+
+	nvmem-cells = <&macaddr_board_config_66>;
+	nvmem-cell-names = "mac-address";
 };
 
 &gmac1 {
@@ -102,8 +105,25 @@
 		};
 
 		partition@800000 {
+			compatible = "linux,ubi";
 			label = "ubi";
 			reg = <0x800000 0x7780000>;
+
+			volumes {
+				ubi-volume-board-config {
+					volname = "board-config";
+
+					nvmem-layout {
+						compatible = "fixed-layout";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						macaddr_board_config_66: macaddr@66 {
+							reg = <0x66 0x6>;
+						};
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
index 975f854f652f..08cf1220b655 100644
--- a/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
+++ b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
@@ -32,7 +32,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 
 	flash: flash@0 {
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/broadcom/bcm59056.dtsi b/arch/arm/boot/dts/broadcom/bcm59056.dtsi
deleted file mode 100644
index a9bb7ad81378..000000000000
--- a/arch/arm/boot/dts/broadcom/bcm59056.dtsi
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-* Copyright 2014 Linaro Limited
-* Author: Matt Porter <mporter@linaro.org>
-*/
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	regulators {
-		rfldo_reg: rfldo {
-		};
-
-		camldo1_reg: camldo1 {
-		};
-
-		camldo2_reg: camldo2 {
-		};
-
-		simldo1_reg: simldo1 {
-		};
-
-		simldo2_reg: simldo2 {
-		};
-
-		sdldo_reg: sdldo {
-		};
-
-		sdxldo_reg: sdxldo {
-		};
-
-		mmcldo1_reg: mmcldo1 {
-		};
-
-		mmcldo2_reg: mmcldo2 {
-		};
-
-		audldo_reg: audldo {
-		};
-
-		micldo_reg: micldo {
-		};
-
-		usbldo_reg: usbldo {
-		};
-
-		vibldo_reg: vibldo {
-		};
-
-		csr_reg: csr {
-		};
-
-		iosr1_reg: iosr1 {
-		};
-
-		iosr2_reg: iosr2 {
-		};
-
-		msr_reg: msr {
-		};
-
-		sdsr1_reg: sdsr1 {
-		};
-
-		sdsr2_reg: sdsr2 {
-		};
-
-		vsr_reg: vsr {
-		};
-
-		gpldo1_reg: gpldo1 {
-		};
-
-		gpldo2_reg: gpldo2 {
-		};
-
-		gpldo3_reg: gpldo3 {
-		};
-
-		gpldo4_reg: gpldo4 {
-		};
-
-		gpldo5_reg: gpldo5 {
-		};
-
-		gpldo6_reg: gpldo6 {
-		};
-
-		vbus_reg: vbus {
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
index e74ba6bf370d..4ec568586b14 100644
--- a/arch/arm/boot/dts/broadcom/bcm63138.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
@@ -184,13 +184,69 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0 0xfffe8000 0x8100>;
+		ranges = <0 0xfffe8000 0x10000>;
 
 		timer: timer@80 {
 			compatible = "brcm,bcm6328-timer", "syscon";
 			reg = <0x80 0x3c>;
 		};
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		serial0: serial@600 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x600 0x1b>;
@@ -209,6 +265,14 @@
 			status = "disabled";
 		};
 
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -248,6 +312,19 @@
 			reg = <0x8000 0x50>;
 		};
 
+		pl081_dma: dma-controller@d000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0xd000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
 		reboot {
 			compatible = "syscon-reboot";
 			regmap = <&timer>;
diff --git a/arch/arm/boot/dts/broadcom/bcm63148.dtsi b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
index 53703827ee3f..e071cddb28fc 100644
--- a/arch/arm/boot/dts/broadcom/bcm63148.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
@@ -99,6 +99,62 @@
 		#size-cells = <1>;
 		ranges = <0 0xfffe8000 0x8000>;
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		uart0: serial@600 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x600 0x20>;
@@ -108,6 +164,14 @@
 			status = "disabled";
 		};
 
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/broadcom/bcm63178.dtsi b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
index 6d8d33498983..430750b3030f 100644
--- a/arch/arm/boot/dts/broadcom/bcm63178.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
@@ -117,6 +117,97 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -143,6 +234,27 @@
 			};
 		};
 
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts
new file mode 100644
index 000000000000..a3616fb7b3a8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Genexis XG6846B Ethernet layer 2/3 router";
+	compatible = "genexis,xg6846b", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Micron D9PTK 256 MB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		secondary-boot@0 {
+			no-map;
+			reg = <0x00000000 0x00008000>;
+		};
+		pmc3-firmware@8000 {
+			no-map;
+			reg = <0x00008000 0x00100000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20000>;
+
+		/* Called "canyon rescue button" in the vendor DTB */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 41 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+	/* Totally 79 GPIOs are available */
+	ngpios = <15>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+	brcm,serial-shift-bits = <16>;
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		function = "ext";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@1 {
+		reg = <1>;
+		active-low;
+		function = "ext";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@3 {
+		reg = <3>;
+		active-low;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@4 {
+		reg = <4>;
+		active-low;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@5 {
+		reg = <5>;
+		active-low;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@6 {
+		reg = <6>;
+		active-low;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@15 {
+		reg = <15>;
+		active-low;
+		function = LED_FUNCTION_USB;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@7 {
+		/* Activity 03 */
+		reg = <7>;
+		active-low;
+		function = "lan1";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@8 {
+		/* Activity 04 */
+		reg = <8>;
+		active-low;
+		function = "lan1";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@9 {
+		/* Activity 03 */
+		reg = <9>;
+		active-low;
+		function = "lan2";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@10 {
+		/* Activity 04 */
+		reg = <10>;
+		active-low;
+		function = "lan2";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@11 {
+		/* Activity 03 */
+		reg = <11>;
+		active-low;
+		function = "lan3";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@12 {
+		/* Activity 04 */
+		reg = <12>;
+		active-low;
+		function = "lan3";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@13 {
+		/* Activity 03 */
+		reg = <13>;
+		active-low;
+		function = "lan4";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@14 {
+		/* Activity 04 */
+		reg = <14>;
+		active-low;
+		function = "lan4";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+
+	/* Winbond W29N02GV, 256MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		loader@0 {
+			label = "loader";
+			reg = <0x00000000 0x00400000>;
+		};
+		image@400000 {
+			label = "image";
+			reg = <0x00400000 0x0fb00000>;
+		};
+		/* 0x00ff0000-0x00ffffff: bad block list */
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+	phy21: ethernet-phy@21 {
+		reg = <21>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
index ee361cb00b7c..f5591a45d2e4 100644
--- a/arch/arm/boot/dts/broadcom/bcm6846.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
@@ -99,6 +99,91 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x640 0x1b>;
@@ -108,6 +193,20 @@
 			status = "disabled";
 		};
 
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -133,5 +232,27 @@
 				reg = <0>;
 			};
 		};
+
+		mdio: mdio@2060 {
+			compatible = "brcm,bcm6846-mdio";
+			reg = <0x02060 0x10>, <0x5a068 0x4>;
+			reg-names = "mdio", "mdio_indir_rw";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm6855.dtsi b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
index 52915ec6f339..a88c3f0fbcb0 100644
--- a/arch/arm/boot/dts/broadcom/bcm6855.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
@@ -116,6 +116,103 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -143,6 +240,27 @@
 			};
 		};
 
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
@@ -151,5 +269,14 @@
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
+
+		uart1: serial@13000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x13000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm6878.dtsi b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
index 70cf23a65fdb..dd837bf69390 100644
--- a/arch/arm/boot/dts/broadcom/bcm6878.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
@@ -108,6 +108,111 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -134,10 +239,23 @@
 			};
 		};
 
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&uart_clk>, <&uart_clk>;
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
diff --git a/arch/arm/boot/dts/broadcom/bcm7445.dtsi b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
index 5ac2042515b8..c6307c7437e3 100644
--- a/arch/arm/boot/dts/broadcom/bcm7445.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
@@ -237,7 +237,8 @@
 			ranges = <0x0 0x0 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -259,7 +260,8 @@
 			ranges = <0x0 0x80000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -281,7 +283,8 @@
 			ranges = <0x0 0x100000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
diff --git a/arch/arm/boot/dts/broadcom/bcm953012hr.dts b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
index b070b69466bd..b728cd54715e 100644
--- a/arch/arm/boot/dts/broadcom/bcm953012hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
@@ -74,7 +74,6 @@
 &spi_nor {
 	status = "okay";
 	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
 
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm953012k.dts b/arch/arm/boot/dts/broadcom/bcm953012k.dts
index f1e6bcaa1edd..27c0992f1855 100644
--- a/arch/arm/boot/dts/broadcom/bcm953012k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012k.dts
@@ -84,7 +84,6 @@
 &spi_nor {
 	status = "okay";
 	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
 
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm958522er.dts b/arch/arm/boot/dts/broadcom/bcm958522er.dts
index 15f023656df0..2f20f86bd31c 100644
--- a/arch/arm/boot/dts/broadcom/bcm958522er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958522er.dts
@@ -135,7 +135,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm958525er.dts b/arch/arm/boot/dts/broadcom/bcm958525er.dts
index 9b9c225a1fb3..980c03f74a19 100644
--- a/arch/arm/boot/dts/broadcom/bcm958525er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958525er.dts
@@ -135,7 +135,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm958525xmc.dts b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
index ca9311452739..440bb2d617f2 100644
--- a/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
@@ -151,7 +151,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm958622hr.dts b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
index 9db3c851451a..116f3a7c3bc6 100644
--- a/arch/arm/boot/dts/broadcom/bcm958622hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
@@ -139,7 +139,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm958623hr.dts b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
index 32786e7c4e12..fc6ab73ecf56 100644
--- a/arch/arm/boot/dts/broadcom/bcm958623hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
@@ -143,7 +143,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
index 71a8b77b46f4..7e71aecb7251 100644
--- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
@@ -17,21 +17,21 @@
 		led-1 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
-			pwms = <&pwm 1 50000>;
+			pwms = <&pwm 1 50000 0>;
 			max-brightness = <255>;
 		};
 
 		led-2 {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
-			pwms = <&pwm 2 50000>;
+			pwms = <&pwm 2 50000 0>;
 			max-brightness = <255>;
 		};
 
 		led-3 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
-			pwms = <&pwm 3 50000>;
+			pwms = <&pwm 3 50000 0>;
 			max-brightness = <255>;
 		};
 	};
@@ -132,7 +132,6 @@
 
 &pwm {
 	status = "okay";
-	#pwm-cells = <2>;
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/broadcom/bcm958625hr.dts b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
index 74263d98de73..a9b6aa04d573 100644
--- a/arch/arm/boot/dts/broadcom/bcm958625hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
@@ -150,7 +150,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm958625k.dts b/arch/arm/boot/dts/broadcom/bcm958625k.dts
index 69ebc7a913a7..7996116fc923 100644
--- a/arch/arm/boot/dts/broadcom/bcm958625k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625k.dts
@@ -154,7 +154,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm988312hr.dts b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
index e96bc3f2d5cf..663a3f27b6e4 100644
--- a/arch/arm/boot/dts/broadcom/bcm988312hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
@@ -139,7 +139,6 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
index 808cd5778e27..0b15ccaa762e 100644
--- a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
@@ -46,8 +46,8 @@
 
 	i2c: i2c {
 		compatible = "i2c-gpio";
-		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
-			<&portd 5 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&portd 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&portd 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;
 		i2c-gpio,scl-output-only;
 		#address-cells = <1>;
@@ -88,7 +88,7 @@
 };
 
 &portd {
-	lcden {
+	lcden-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/intel/ixp/Makefile b/arch/arm/boot/dts/intel/ixp/Makefile
index ab8525f1ea1d..cb30d8d55016 100644
--- a/arch/arm/boot/dts/intel/ixp/Makefile
+++ b/arch/arm/boot/dts/intel/ixp/Makefile
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-actiontec-mi424wr-ac.dtb \
+	intel-ixp42x-actiontec-mi424wr-d.dtb \
 	intel-ixp42x-linksys-nslu2.dtb \
 	intel-ixp42x-linksys-wrv54g.dtb \
 	intel-ixp42x-freecom-fsg-3.dtb \
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
new file mode 100644
index 000000000000..413b9255f9e3
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision A and C
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+	model = "Actiontec MI424WR rev A/C";
+	compatible = "actiontec,mi424wr-ac", "intel,ixp42x";
+
+	soc {
+		/* EthB used for WAN */
+		ethernet@c8009000 {
+			phy-handle = <&phy17>; // 17 on revision A-C
+
+			mdio {
+				phy17: ethernet-phy@17 {
+					/* WAN */
+					reg = <17>;
+				};
+			};
+		};
+
+		/* EthC used for LAN */
+		ethernet@c800a000 {
+			/* Fixed link to the CPU MII port on the KS8995 */
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
new file mode 100644
index 000000000000..3619c6411a5c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision D
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+	model = "Actiontec MI424WR rev D";
+	compatible = "actiontec,mi424wr-d", "intel,ixp42x";
+
+	soc {
+		/* EthB used for LAN */
+		ethernet@c8009000 {
+			/* Fixed link to the CPU MII port on the KS8995 */
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+
+			mdio {
+				/* PHY ID 0x00221450 */
+				phy5: ethernet-phy@5 {
+					/* WAN */
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC used for WAN */
+		ethernet@c800a000 {
+			phy-handle = <&phy5>; // 5 on revision D
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
new file mode 100644
index 000000000000..76fd97c5beb6
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wan-coax {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "wan-coax";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-power-alarm {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_ALARM;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-power {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-internet-down {
+			color = <LED_COLOR_ID_RED>;
+			function = "internet-down";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-internet-up {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "internet-up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-lan-coax {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "lan-coax";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-wan-ethernet-alarm {
+			color = <LED_COLOR_ID_RED>;
+			function = "wan-ethernet-alarm";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		/* The last three LEDs are not mounted but traces exist on the PCB */
+		led-phone-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "phone-1";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-phone-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "phone-2";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-voip {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "voip";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "lan1";
+					phy-mode = "mii";
+					phy-handle = <&phy1>;
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "lan2";
+					phy-mode = "mii";
+					phy-handle = <&phy2>;
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "lan3";
+					phy-mode = "mii";
+					phy-handle = <&phy3>;
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "lan4";
+					phy-mode = "mii";
+					phy-handle = <&phy4>;
+				};
+				ethernet-port@4 {
+					reg = <4>;
+					ethernet = <&ethc>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+			};
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x0800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x3f>;
+				};
+			};
+			gpio1: gpio@1,0 {
+				/* MMIO GPIO at CS1 */
+				compatible = "intel,ixp4xx-expansion-bus-mmio-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				big-endian;
+				reg = <1 0x00000000 0x2>;
+				reg-names = "dat";
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				pci-reset-hog {
+					gpio-hog;
+					gpios = <7 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "PCI reset";
+				};
+				pstn-relay-hog-1 {
+					gpio-hog;
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					output-low;
+					line-name = "PSTN relay control 1";
+				};
+				pstn-relay-hog-2 {
+					gpio-hog;
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					output-low;
+					line-name = "PSTN relay control 2";
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 8 */
+			<0x6800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 6 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 8 */
+			/* IDSEL 15 */
+			<0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 6 */
+			<0x7800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 15 is irq 7 */
+		};
+
+		ethb: ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "mii";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* 1, 2, 3 and 4 are ports on the KS8995 switch */
+				phy1: ethernet-phy@1 {
+					/* LAN1 */
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					/* LAN2 */
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					/* LAN3 */
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					/* LAN4 */
+					reg = <4>;
+				};
+			};
+		};
+
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "mii";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
index 98275a363c57..cb1842c83ac8 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
@@ -72,10 +72,55 @@
 		cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "micrel,ks8995";
 			reg = <0>;
 			spi-max-frequency = <50000000>;
+
+			/*
+			 * The PHYs are accessed over the external MDIO
+			 * bus and not internally through the switch control
+			 * registers.
+			 */
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "1";
+					phy-mode = "mii";
+					phy-handle = <&phy1>;
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "2";
+					phy-mode = "mii";
+					phy-handle = <&phy2>;
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "3";
+					phy-mode = "mii";
+					phy-handle = <&phy3>;
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "4";
+					phy-mode = "mii";
+					phy-handle = <&phy4>;
+				};
+				ethernet-port@4 {
+					reg = <4>;
+					ethernet = <&ethb>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+			};
 		};
 	};
 
@@ -135,40 +180,59 @@
 		};
 
 		/*
-		 * EthB - connected to the KS8995 switch ports 1-4
-		 * FIXME: the boardfile defines .phy_mask = 0x1e for this port to enable output to
-		 * all four switch ports, also using an out of tree multiphy patch.
-		 * Do we need a new binding and property for this?
+		 * EthB connects to the KS8995 CPU port and faces ports 1-4
+		 * through the switch fabric.
+		 *
+		 * To complicate things, the MDIO channel is also only
+		 * accessible through EthB, but used independently for PHY
+		 * control.
 		 */
-		ethernet@c8009000 {
+		ethb: ethernet@c8009000 {
 			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy4>;
+			phy-mode = "mii";
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
 
 			mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				/* Should be ports 1-4 on the KS8995 switch */
+				/*
+				 * LAN ports 1-4 on the KS8995 switch
+				 * and PHY5 for WAN need to be accessed
+				 * through this external MDIO channel.
+				 */
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
 				phy4: ethernet-phy@4 {
 					reg = <4>;
 				};
-
-				/* Should be port 5 on the KS8995 switch */
 				phy5: ethernet-phy@5 {
 					reg = <5>;
 				};
 			};
 		};
 
-		/* EthC - connected to KS8995 switch port 5 */
-		ethernet@c800a000 {
+		/*
+		 * EthC connects to MII-P5 on the KS8995 bypassing
+		 * all of the switch logic and facing PHY5
+		 */
+		ethc: ethernet@c800a000 {
 			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
+			phy-mode = "mii";
 			phy-handle = <&phy5>;
 		};
 	};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
index 19d56e9aec9d..a351a97d257e 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
@@ -8,6 +8,7 @@
 
 #include "intel-ixp42x.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Netgear WG302 v1";
@@ -32,6 +33,35 @@
 		serial0 = &uart1;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		test_led: led-test {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "test";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		wlan_led: led-wlan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy0tx";
+		};
+	};
+
+	gpio_keys {
+		/* RESET is on GPIO13 which can't fire interrupts */
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button-reset {
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	soc {
 		bus@c4000000 {
 			flash@0,0 {
@@ -57,7 +87,7 @@
 			status = "okay";
 
 			/*
-			 * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
+			 * Taken from WG302 v1 PCI boardfile (wg302v1-pci.c)
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
@@ -70,10 +100,10 @@
 			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
 			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
 			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */
-			<0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */
-			<0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
+			<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
+			<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
 		};
 
 		ethernet@c8009000 {
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
index 51a716c59669..0adeccabd4fe 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
@@ -193,10 +193,10 @@
 			compatible = "intel,ixp4xx-ethernet";
 			reg = <0xc800c000 0x1000>;
 			status = "disabled";
-			intel,npe = <0>;
 			/* Dummy values that depend on firmware */
 			queue-rx = <&qmgr 0>;
 			queue-txready = <&qmgr 0>;
+			intel,npe-handle = <&npe 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
index c467828aeb4b..8df0976da01c 100644
--- a/arch/arm/boot/dts/intel/socfpga/Makefile
+++ b/arch/arm/boot/dts/intel/socfpga/Makefile
@@ -2,7 +2,30 @@
 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
 	socfpga_arria10_chameleonv3.dtb \
-	socfpga_arria10_mercury_pe1.dtb \
+	socfpga_arria10_mercury_aa1_pe1_emmc.dtb \
+	socfpga_arria10_mercury_aa1_pe1_qspi.dtb \
+	socfpga_arria10_mercury_aa1_pe1_sdmmc.dtb \
+	socfpga_arria10_mercury_aa1_pe3_emmc.dtb \
+	socfpga_arria10_mercury_aa1_pe3_qspi.dtb \
+	socfpga_arria10_mercury_aa1_pe3_sdmmc.dtb \
+	socfpga_arria10_mercury_aa1_st1_emmc.dtb \
+	socfpga_arria10_mercury_aa1_st1_qspi.dtb \
+	socfpga_arria10_mercury_aa1_st1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe1_emmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe3_emmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe3_qspi.dtb \
+	socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa1_st1_emmc.dtb \
+	socfpga_cyclone5_mercury_sa1_st1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa1_st1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa2_pe1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa2_pe3_qspi.dtb \
+	socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa2_st1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa2_st1_sdmmc.dtb \
 	socfpga_arria10_socdk_nand.dtb \
 	socfpga_arria10_socdk_qspi.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
@@ -10,6 +33,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_cyclone5_mcvevk.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_de0_nano_soc.dtb \
+	socfpga_cyclone5_de10nano.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
 	socfpga_cyclone5_sodia.dtb \
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
index 6b6e77596ffa..b108265e9bde 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@@ -440,7 +440,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
@@ -460,7 +460,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
@@ -480,7 +480,7 @@
 			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
 			clock-names = "stmmaceth", "ptp_ref";
 			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
-			reset-names = "stmmaceth", "ahb";
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
index 41f865c8c098..c80201bce793 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
@@ -7,12 +7,14 @@
 
 / {
 
-	model = "Enclustra Mercury AA1";
-	compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
+	model = "Enclustra Mercury+ AA1";
+	compatible = "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
 
 	aliases {
 		ethernet0 = &gmac0;
 		serial1 = &uart1;
+		spi0 = &qspi;
 	};
 
 	memory@0 {
@@ -24,52 +26,102 @@
 	chosen {
 		stdout-path = "serial1:115200n8";
 	};
+
+	/* Adjusted the i2c labels to use generic base-board dtsi files for
+	 * Enclustra Arria10 and Cyclone5 SoMs.
+	 *
+	 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
+	 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
+	 * fragments. Thus define generic labels here to match the correct i2c
+	 * bus in a generic base-board .dtsi file.
+	 */
+	soc {
+		i2c_encl: i2c@ffc02300 {
+		};
+		i2c_encl_fpga: i2c@ffc02200 {
+		};
+	};
+};
+
+&i2c_encl {
+	status = "okay";
+	i2c-sda-hold-time-ns = <300>;
+	clock-frequency = <100000>;
+
+	atsha204a: crypto@64 {
+		compatible = "atmel,atsha204a";
+		reg = <0x64>;
+	};
+
+	isl12022: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+&i2c_encl_fpga {
+	i2c-sda-hold-time-ns = <300>;
+	status = "disabled";
 };
 
 &gmac0 {
-	phy-mode = "rgmii";
+	status = "okay";
+	phy-mode = "rgmii-id";
 	phy-addr = <0xffffffff>; /* probe for phy addr */
-
 	max-frame-size = <3800>;
-
 	phy-handle = <&phy3>;
 
+	/delete-property/ mac-address;
+
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
 		phy3: ethernet-phy@3 {
-			txd0-skew-ps = <0>; /* -420ps */
-			txd1-skew-ps = <0>; /* -420ps */
-			txd2-skew-ps = <0>; /* -420ps */
-			txd3-skew-ps = <0>; /* -420ps */
+			reg = <3>;
+
+			/* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
+			rxc-skew-ps = <1680>; /* 780ps */
 			rxd0-skew-ps = <420>; /* 0ps */
 			rxd1-skew-ps = <420>; /* 0ps */
 			rxd2-skew-ps = <420>; /* 0ps */
 			rxd3-skew-ps = <420>; /* 0ps */
-			txen-skew-ps = <0>; /* -420ps */
-			txc-skew-ps = <1860>; /* 960ps */
 			rxdv-skew-ps = <420>; /* 0ps */
-			rxc-skew-ps = <1680>; /* 780ps */
-			reg = <3>;
+
+			/* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
+			txc-skew-ps = <1860>; /* 960ps */
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			txen-skew-ps = <0>; /* -420ps */
 		};
 	};
 };
 
-&i2c1 {
-	atsha204a: crypto@64 {
-		compatible = "atmel,atsha204a";
-		reg = <0x64>;
-	};
+&gpio0 {
+	status = "okay";
+};
 
-	isl12022: isl12022@6f {
-		compatible = "isil,isl12022";
-		reg = <0x6f>;
-	};
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
 };
 
 /* Following mappings are taken from arria10 socdk dts */
 &mmc {
+	status = "okay";
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
@@ -79,3 +131,50 @@
 &osc1 {
 	clock-frequency = <33330000>;
 };
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					 <47 IRQ_TYPE_LEVEL_HIGH>,
+					 <16 IRQ_TYPE_LEVEL_HIGH>,
+					 <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash0: flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <10000000>;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@raw {
+			label = "Flash Raw";
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&watchdog1 {
+	status = "disabled";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts
new file mode 100644
index 000000000000..b6cca0b5fd09
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts
new file mode 100644
index 000000000000..6ad023477cd2
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-aa1-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts
new file mode 100644
index 000000000000..653c9a86516b
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-aa1-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts
new file mode 100644
index 000000000000..ae9c7c6a2370
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts
new file mode 100644
index 000000000000..c3a0c30a07a5
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts
new file mode 100644
index 000000000000..dc1e1ad20381
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts
new file mode 100644
index 000000000000..61d5e4c85d9b
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts
new file mode 100644
index 000000000000..a3b99c9b16fd
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts
new file mode 100644
index 000000000000..5deb289e2b55
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts
deleted file mode 100644
index cf533f76a9fd..000000000000
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2023 Steffen Trumtrar <kernel@pengutronix.de>
- */
-/dts-v1/;
-#include "socfpga_arria10_mercury_aa1.dtsi"
-
-/ {
-	model = "Enclustra Mercury+ PE1";
-	compatible = "enclustra,mercury-pe1", "enclustra,mercury-aa1",
-		     "altr,socfpga-arria10", "altr,socfpga";
-
-	aliases {
-		ethernet0 = &gmac0;
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-};
-
-&gmac0 {
-	status = "okay";
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&mmc {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts
new file mode 100644
index 000000000000..ec25106caacf
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, Intel Corporation
+ *
+ * based on socfpga_cyclone5_de0_nano_soc.dts
+ */
+/dts-v1/;
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Terasic DE10-Nano";
+	compatible = "terasic,de10-nano", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		/* 1 GiB */
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	soc {
+		fpga: bus@ff200000 {
+			compatible = "simple-bus";
+			reg = <0xff200000 0x00200000>;
+			ranges = <0x00000000 0xff200000 0x00200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/*
+			 * Here the devices will appear if an FPGA image is
+			 * loaded. Their description is expected to be added
+			 * using a device tree overlay that matches the image.
+			 */
+		};
+	};
+};
+
+&gmac1 {
+	/* Uses a KSZ9031RNX phy */
+	phy-mode = "rgmii-id";
+	rxd0-skew-ps = <420>;
+	rxd1-skew-ps = <420>;
+	rxd2-skew-ps = <420>;
+	rxd3-skew-ps = <420>;
+	txen-skew-ps = <0>;
+	rxdv-skew-ps = <420>;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+		/* HPS_GSENSOR_INT is routed to UART0_RX/CAN0_RX/SPIM0_SS1/HPS_GPIO61 */
+		interrupt-parent = <&portc>;
+		interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "INT1";
+	};
+};
+
+&mmc0 {
+	/* micro SD card socket J11 */
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Accessible via USB (FT232R) on Mini-USB plug J4
+	 * RX = TRACE_D0/SPIS0_CLK/UART0_RX/HPS_GPIO49
+	 * TX = TRACE_D1/SPIS0_MOSI/UART0_TX/HPS_GPIO50
+	 * no handshaking lines
+	 */
+	clock-frequency = <100000000>;
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
index ceaec29770c6..c1e1264bcb09 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
@@ -50,8 +50,6 @@
 
 	stmpe1: stmpe811@41 {
 		compatible = "st,stmpe811";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x41>;
 		id = <0>;
 		blocks = <0x5>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi
new file mode 100644
index 000000000000..49944f9632f9
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	/* Adjusted the i2c labels to use generic base-board dtsi files for
+	 * Enclustra Arria10 and Cyclone5 SoMs.
+	 *
+	 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
+	 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
+	 * fragments. Thus define generic labels here to match the correct i2c
+	 * bus in a generic base-board .dtsi file.
+	 */
+	soc {
+		i2c_encl: i2c@ffc04000 {
+		};
+		i2c_encl_fpga: i2c@ffc05000 {
+		};
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&osc1 {
+	clock-frequency = <50000000>;
+};
+
+&i2c_encl {
+	i2c-sda-hold-time-ns = <300>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	isl12020: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+&i2c_encl_fpga {
+	i2c-sda-hold-time-ns = <300>;
+	status = "disabled";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+};
+
+&mmc0 {
+	status = "okay";
+	/delete-property/ cap-mmc-highspeed;
+	/delete-property/ cap-sd-highspeed;
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <10000000>;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@raw {
+			label = "Flash Raw";
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	/delete-property/ mac-address;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy3>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+
+			/* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
+			rxc-skew-ps = <1680>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+			rxdv-skew-ps = <420>;
+
+			/* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
+			txc-skew-ps = <1860>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts
new file mode 100644
index 000000000000..85d6146da0da
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts
new file mode 100644
index 000000000000..770ab680a18c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts
new file mode 100644
index 000000000000..990ca0fec61e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts
new file mode 100644
index 000000000000..6c8fd5b0d6eb
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts
new file mode 100644
index 000000000000..3292426078a1
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts
new file mode 100644
index 000000000000..1eb10b5244dd
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts
new file mode 100644
index 000000000000..8c97b5b3adea
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts
new file mode 100644
index 000000000000..e6d14b22e41d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts
new file mode 100644
index 000000000000..beaeca94d4df
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi
new file mode 100644
index 000000000000..0b28964e0378
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	/* Adjusted the i2c labels to use generic base-board dtsi files for
+	 * Enclustra Arria10 and Cyclone5 SoMs.
+	 *
+	 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
+	 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
+	 * fragments. Thus define generic labels here to match the correct i2c
+	 * bus in a generic base-board .dtsi file.
+	 */
+	soc {
+		i2c_encl: i2c@ffc04000 {
+		};
+		i2c_encl_fpga: i2c@ffc05000 {
+		};
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+};
+
+&osc1 {
+	clock-frequency = <50000000>;
+};
+
+&i2c_encl {
+	i2c-sda-hold-time-ns = <300>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	isl12020: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+
+	atsha204a: crypto@64 {
+		compatible = "atmel,atsha204a";
+		reg = <0x64>;
+	};
+};
+
+&i2c_encl_fpga {
+	i2c-sda-hold-time-ns = <300>;
+	status = "disabled";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <10000000>;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@raw {
+			label = "Flash Raw";
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	/delete-property/ mac-address;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy3>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+
+			/* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
+			rxc-skew-ps = <1680>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+			rxdv-skew-ps = <420>;
+
+			/* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
+			txc-skew-ps = <1860>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts
new file mode 100644
index 000000000000..6f79d9ed1d36
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa2-pe1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts
new file mode 100644
index 000000000000..b94bd8bafc26
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa2-pe1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts
new file mode 100644
index 000000000000..51fc4a22937a
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa2-pe3", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts
new file mode 100644
index 000000000000..e4209209f4fa
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa2-pe3", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts
new file mode 100644
index 000000000000..ab4549a0d455
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa2-st1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts
new file mode 100644
index 000000000000..ebe62879c3fb
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa2-st1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
index d37a982e8571..97622febc44e 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -151,12 +151,6 @@
 
 &spi0 {
 	status = "okay";
-
-	spidev@0 {
-		compatible = "rohm,dh2228fv";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
 };
 
 &usb1 {
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
index ce0d6514eeb5..e4794ccb8e41 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -66,8 +66,10 @@
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		phy0: ethernet-phy@0 {
-			reg = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
 			rxd0-skew-ps = <0>;
 			rxd1-skew-ps = <0>;
 			rxd2-skew-ps = <0>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi
new file mode 100644
index 000000000000..d79cb64da0de
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&qspi {
+	status = "disabled";
+};
+
+&mmc {
+	bus-width = <8>;
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi
new file mode 100644
index 000000000000..5ba21dd8f5ba
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&mmc {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi
new file mode 100644
index 000000000000..2b102e0b6217
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&qspi {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi
new file mode 100644
index 000000000000..abc4bfb7fccf
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+	status = "okay";
+
+	eeprom@57 {
+		status = "okay";
+		compatible = "microchip,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+		label = "user eeprom";
+		address-width = <16>;
+	};
+
+	lm96080: temperature-sensor@2f {
+		status = "okay";
+		compatible = "national,lm80";
+		reg = <0x2f>;
+	};
+
+	si5338: clock-controller@70 {
+		compatible = "silabs,si5338";
+		reg = <0x70>;
+	};
+
+};
+
+&i2c_encl_fpga {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi
new file mode 100644
index 000000000000..bc57b0680878
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+	i2c-mux@74 {
+		status = "okay";
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@56 {
+				status = "okay";
+				compatible = "microchip,24c128";
+				reg = <0x56>;
+				pagesize = <64>;
+				label = "user eeprom";
+				address-width = <16>;
+			};
+
+			lm96080: temperature-sensor@2f {
+				status = "okay";
+				compatible = "national,lm80";
+				reg = <0x2f>;
+			};
+
+			pcal6416: gpio@20 {
+				status = "okay";
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&i2c_encl_fpga {
+	status = "okay";
+
+	i2c-mux@75 {
+		status = "okay";
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi
new file mode 100644
index 000000000000..4c00475f4303
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+	si5338: clock-controller@70 {
+		compatible = "silabs,si5338";
+		reg = <0x70>;
+	};
+};
+
+&i2c_encl_fpga {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-db.dts b/arch/arm/boot/dts/marvell/armada-370-db.dts
index a7dc4c04d10b..a9a05d826f22 100644
--- a/arch/arm/boot/dts/marvell/armada-370-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-db.dts
@@ -119,7 +119,7 @@
 			"Out Jack", "HPL",
 			"Out Jack", "HPR",
 			"AIN1L", "In Jack",
-			"AIN1L", "In Jack";
+			"AIN1R", "In Jack";
 		status = "okay";
 
 		simple-audio-card,dai-link@0 {
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
index 8208c6a9627a..7aa71a9aa1bb 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
@@ -453,7 +453,7 @@
 	pinctrl-0 = <&cf_gtr_fan_pwm &cf_gtr_wifi_disable_pins>;
 	pinctrl-names = "default";
 
-	wifi-disable {
+	wifi-disable-hog {
 		gpio-hog;
 		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -465,7 +465,7 @@
 	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins &cf_gtr_lte_disable_pins>;
 	pinctrl-names = "default";
 
-	lte-disable {
+	lte-disable-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -476,14 +476,14 @@
 	 * This signal, when asserted, isolates Armada 38x sample at reset pins
 	 * from control of external devices. Should be de-asserted after reset.
 	 */
-	sar-isolation {
+	sar-isolation-hog {
 		gpio-hog;
 		gpios = <15 GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "sar-isolation";
 	};
 
-	poe-reset {
+	poe-reset-hog {
 		gpio-hog;
 		gpios = <16 GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
index f7daa3bc707e..cf32ba9b4e8e 100644
--- a/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
@@ -34,7 +34,7 @@
 };
 
 &gpio0 {
-	phy1_reset {
+	phy1-reset-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm/boot/dts/marvell/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi
index 1181b13deabc..1d616edda322 100644
--- a/arch/arm/boot/dts/marvell/armada-38x.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi
@@ -247,7 +247,7 @@
 					marvell,function = "dev";
 				};
 
-				nand_rb: nand-rb {
+				nand_rb: nand-rb-pins {
 					marvell,pins = "mpp41";
 					marvell,function = "nand";
 				};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
index 7a7e2066c498..a9a71326aafc 100644
--- a/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
@@ -322,7 +322,7 @@
 		marvell,function = "dev";
 	};
 
-	nand_rb: nand-rb {
+	nand_rb: nand-rb-pins {
 		marvell,pins = "mpp19";
 		marvell,function = "nand";
 	};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-db.dtsi b/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
index 6fe2e31534af..8bacaeb4f4bd 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
@@ -39,7 +39,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
index 2f6793f794cd..36394d1ab3e2 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
@@ -129,7 +129,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
index 52baffe45f12..259cb3d5f16d 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
@@ -27,8 +27,8 @@
 
 	i2c {
 		compatible = "i2c-gpio";
-		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
-			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
+		sda-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
index e3b41784c876..051579fc36b8 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -63,7 +63,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
index d4e0b8150a84..cf26e2ceaaa0 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
@@ -38,7 +38,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0 0>;
+			sound-dai = <&audio0>;
 		};
 
 		simple-audio-card,codec {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
index 47f03c69c55a..9d7cff4feada 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
@@ -53,7 +53,7 @@
 			cd-gpios = <&gpio0 29 9>;
 		};
 		gpio@10100 {
-			p28 {
+			p28-hog {
 				gpio-hog;
 				gpios = <28 GPIO_ACTIVE_HIGH>;
 				/*
@@ -71,7 +71,7 @@
 			};
 		};
 		gpio@10140 {
-			p2 {
+			p2-hog {
 				gpio-hog;
 				gpios = <2 GPIO_ACTIVE_HIGH>;
 				/*
diff --git a/arch/arm/boot/dts/marvell/kirkwood.dtsi b/arch/arm/boot/dts/marvell/kirkwood.dtsi
index 815ef7719d13..8a1338e672b3 100644
--- a/arch/arm/boot/dts/marvell/kirkwood.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood.dtsi
@@ -263,7 +263,7 @@
 			status = "okay";
 		};
 
-		usb0: ehci@50000 {
+		usb0: usb@50000 {
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
diff --git a/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
index 55ea87870af3..86c425b72fa7 100644
--- a/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
+++ b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
@@ -113,8 +113,8 @@
 			  "Headphones", "HPOR",
 			  "MIC2", "Mic Jack";
 		widgets = "Headphone", "Headphones", "Microphone", "Mic Jack";
-		hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>;
-		mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>;
+		hp-det-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		mic-det-gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/marvell/orion5x.dtsi b/arch/arm/boot/dts/marvell/orion5x.dtsi
index 2d41f5c166ee..939259c57e05 100644
--- a/arch/arm/boot/dts/marvell/orion5x.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x.dtsi
@@ -146,7 +146,7 @@
 				status = "okay";
 			};
 
-			ehci0: ehci@50000 {
+			ehci0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x1000>;
 				interrupts = <17>;
@@ -218,7 +218,7 @@
 				status = "okay";
 			};
 
-			ehci1: ehci@a0000 {
+			ehci1: usb@a0000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0xa0000 0x1000>;
 				interrupts = <12>;
diff --git a/arch/arm/boot/dts/mediatek/Makefile b/arch/arm/boot/dts/mediatek/Makefile
index 1957947cb41c..37c4cded0eae 100644
--- a/arch/arm/boot/dts/mediatek/Makefile
+++ b/arch/arm/boot/dts/mediatek/Makefile
@@ -1,7 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt2701-evb.dtb \
+	mt6572-jty-d101.dtb \
+	mt6572-lenovo-a369i.dtb \
 	mt6580-evbp1.dtb \
+	mt6582-alcatel-yarisxl.dtb \
 	mt6582-prestigio-pmt5008-3g.dtb \
 	mt6589-aquaris5.dtb \
 	mt6589-fairphone-fp1.dtb \
diff --git a/arch/arm/boot/dts/mediatek/mt2701-evb.dts b/arch/arm/boot/dts/mediatek/mt2701-evb.dts
index 4c76366aa938..e97dc37f716c 100644
--- a/arch/arm/boot/dts/mediatek/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mediatek/mt2701-evb.dts
@@ -50,6 +50,7 @@
 
 	bt_sco_codec:bt_sco_codec {
 		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
 	};
 
 	backlight_lcd: backlight_lcd {
diff --git a/arch/arm/boot/dts/mediatek/mt2701.dtsi b/arch/arm/boot/dts/mediatek/mt2701.dtsi
index ce6a4015fed5..128b87229f3d 100644
--- a/arch/arm/boot/dts/mediatek/mt2701.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt2701.dtsi
@@ -597,7 +597,7 @@
 	};
 
 	hifsys: syscon@1a000000 {
-		compatible = "mediatek,mt2701-hifsys", "syscon";
+		compatible = "mediatek,mt2701-hifsys";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
diff --git a/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts b/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts
new file mode 100644
index 000000000000..18c3cab6b7a3
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+/dts-v1/;
+#include "mt6572.dtsi"
+
+/ {
+	model = "JTY D101";
+	compatible = "jty,d101", "mediatek,mt6572";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@bf400000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <1024>;
+			height = <600>;
+			stride = <(1024 * 2)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@80000000 {
+			reg = <0x80000000 0x100000>;
+			no-map;
+		};
+
+		modem@be000000 {
+			reg = <0xbe000000 0x1400000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@bf400000 {
+			reg = <0xbf400000 0xc00000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts b/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts
new file mode 100644
index 000000000000..c2f0c60ea777
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+/dts-v1/;
+#include "mt6572.dtsi"
+
+/ {
+	model = "Lenovo A369i";
+	compatible = "lenovo,a369i", "mediatek,mt6572";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@9fa00000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <480>;
+			height = <800>;
+			stride = <(480 * 2)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@80000000 {
+			reg = <0x80000000 0x100000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@9fa00000 {
+			reg = <0x9fa00000 0x600000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6572.dtsi b/arch/arm/boot/dts/mediatek/mt6572.dtsi
new file mode 100644
index 000000000000..ac70f266d698
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt6572-wdt", "mediatek,mt6589-wdt";
+			reg = <0x10007000 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
+			timeout-sec = <15>;
+			#reset-cells = <1>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6572-timer", "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6572-sysirq", "mediatek,mt6577-sysirq";
+			reg = <0x10200100 0x1c>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x2000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		uart0: serial@11005000 {
+			compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart";
+			reg = <0x11005000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart1: serial@11006000 {
+			compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart";
+			reg = <0x11006000 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts b/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts
new file mode 100644
index 000000000000..f55d8edad1ac
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Cristian Cozzolino <cristian_ci@protonmail.com>
+ */
+
+/dts-v1/;
+#include "mt6582.dtsi"
+
+/ {
+	model = "Alcatel One Touch Pop C7 (OT-7041D)";
+	compatible = "alcatel,yarisxl", "mediatek,mt6582";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@9fa00000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <480>;
+			height = <854>;
+			stride = <(480 * 4)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@9f900000 {
+			reg = <0x9f900000 0x100000>;
+			no-map;
+		};
+
+		modem@9e000000 {
+			reg = <0x9e000000 0x1800000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@9fa00000 {
+			reg = <0x9fa00000 0x600000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6582.dtsi b/arch/arm/boot/dts/mediatek/mt6582.dtsi
index 4263371784cd..f941ea44898a 100644
--- a/arch/arm/boot/dts/mediatek/mt6582.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6582.dtsi
@@ -9,12 +9,12 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	compatible = "mediatek,mt6582";
 	interrupt-parent = <&sysirq>;
 
 	cpus {
-		#address-cells = <1>;
 		#size-cells = <0>;
+		#address-cells = <1>;
+		enable-method = "mediatek,mt6589-smp";
 
 		cpu@0 {
 			device_type = "cpu";
@@ -38,91 +38,95 @@
 		};
 	};
 
-	system_clk: dummy13m {
+	uart_clk: dummy26m {
 		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
 		#clock-cells = <0>;
+		clock-frequency = <26000000>;
 	};
 
-	rtc_clk: dummy32k {
+	system_clk: dummy13m {
 		compatible = "fixed-clock";
-		clock-frequency = <32000>;
 		#clock-cells = <0>;
+		clock-frequency = <13000000>;
 	};
 
-	uart_clk: dummy26m {
+	rtc_clk: dummy32k {
 		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
 		#clock-cells = <0>;
+		clock-frequency = <32000>;
 	};
 
-	timer: timer@11008000 {
-		compatible = "mediatek,mt6577-timer";
-		reg = <0x10008000 0x80>;
-		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc_clk>;
-		clock-names = "system-clk", "rtc-clk";
-	};
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
 
-	sysirq: interrupt-controller@10200100 {
-		compatible = "mediatek,mt6582-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0x10200100 0x1c>;
-	};
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt6582-wdt", "mediatek,mt6589-wdt";
+			reg = <0x10007000 0x100>;
+		};
 
-	gic: interrupt-controller@10211000 {
-		compatible = "arm,cortex-a7-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0x10211000 0x1000>,
-		      <0x10212000 0x2000>,
-		      <0x10214000 0x2000>,
-		      <0x10216000 0x2000>;
-	};
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6582-timer", "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+		};
 
-	uart0: serial@11002000 {
-		compatible = "mediatek,mt6582-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0x11002000 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq";
+			reg = <0x10200100 0x1c>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
 
-	uart1: serial@11003000 {
-		compatible = "mediatek,mt6582-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0x11003000 0x400>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x2000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+		};
 
-	uart2: serial@11004000 {
-		compatible = "mediatek,mt6582-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0x11004000 0x400>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11002000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
 
-	uart3: serial@11005000 {
-		compatible = "mediatek,mt6582-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0x11005000 0x400>;
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&uart_clk>;
-		status = "disabled";
-	};
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11003000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
 
-	watchdog: watchdog@10007000 {
-		compatible = "mediatek,mt6582-wdt",
-			     "mediatek,mt6589-wdt";
-		reg = <0x10007000 0x100>;
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11004000 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11005000 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/mediatek/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi
index 814586abc297..4b1685b93989 100644
--- a/arch/arm/boot/dts/mediatek/mt7623.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi
@@ -308,7 +308,7 @@
 		clock-names = "spi", "wrap";
 	};
 
-	cir: cir@10013000 {
+	cir: ir-receiver@10013000 {
 		compatible = "mediatek,mt7623-cir";
 		reg = <0 0x10013000 0 0x1000>;
 		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -744,8 +744,7 @@
 
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
-			     "mediatek,mt2701-hifsys",
-			     "syscon";
+			     "mediatek,mt2701-hifsys";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile
index 470fe46433a9..79cd38fdc7da 100644
--- a/arch/arm/boot/dts/microchip/Makefile
+++ b/arch/arm/boot/dts/microchip/Makefile
@@ -12,6 +12,7 @@ DTC_FLAGS_at91-sama5d2_xplained := -@
 DTC_FLAGS_at91-sama5d3_eds := -@
 DTC_FLAGS_at91-sama5d3_xplained := -@
 DTC_FLAGS_at91-sama5d4_xplained := -@
+DTC_FLAGS_at91-sama7d65_curiosity := -@
 DTC_FLAGS_at91-sama7g54_curiosity := -@
 DTC_FLAGS_at91-sama7g5ek := -@
 dtb-$(CONFIG_SOC_AT91RM9200) += \
@@ -90,6 +91,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-sama5d4_xplained.dtb \
 	at91-sama5d4ek.dtb \
 	at91-vinco.dtb
+dtb-$(CONFIG_SOC_SAMA7D65) += \
+	at91-sama7d65_curiosity.dtb
 dtb-$(CONFIG_SOC_SAMA7G5) += \
 	at91-sama7g54_curiosity.dtb \
 	at91-sama7g5ek.dtb
diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts
index b65f80e1ef05..302cb872efa1 100644
--- a/arch/arm/boot/dts/microchip/aks-cdu.dts
+++ b/arch/arm/boot/dts/microchip/aks-cdu.dts
@@ -56,7 +56,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts
index 7f527622d3f2..c11f4f7dac94 100644
--- a/arch/arm/boot/dts/microchip/animeo_ip.dts
+++ b/arch/arm/boot/dts/microchip/animeo_ip.dts
@@ -136,7 +136,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
 			status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-foxg20.dts b/arch/arm/boot/dts/microchip/at91-foxg20.dts
index 9dfd5de808d1..8e9e87665045 100644
--- a/arch/arm/boot/dts/microchip/at91-foxg20.dts
+++ b/arch/arm/boot/dts/microchip/at91-foxg20.dts
@@ -131,7 +131,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
index 5ccb3c139592..892dbd8dbbed 100644
--- a/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
@@ -114,7 +114,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
index 2fb51b9aca2a..49dc1a4ccb36 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
@@ -105,7 +105,7 @@
 			status = "okay";
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
index cdc56b53299d..c1ff3248bd8f 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -609,7 +609,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <104000000>;
-		spi-cs-setup-ns = <7>;
+		spi-cs-setup-delay-ns = <7>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
index 87b6ea97590b..1a6a909a5043 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
@@ -88,8 +88,6 @@
 };
 
 &i2c6 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flx6_default>;
 	i2c-analog-filter;
@@ -200,6 +198,52 @@
 	};
 };
 
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&i2c7 {
+	dmas = <0>, <0>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flx7_default>;
+	status = "okay";
+
+	power-monitor@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDD3V3";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "DCDC4";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDCORE";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDIODDR";
+		};
+	};
+};
+
 &i2s {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2s_default>;
@@ -233,6 +277,12 @@
 				<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 				<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 		};
+
+		pinctrl_flx7_default: flx7-default {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
index 8ac85dac5a96..13c28e92b17e 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
@@ -44,7 +44,7 @@
 					compatible = "jedec,spi-nor";
 					reg = <0>;
 					spi-max-frequency = <104000000>;
-					spi-cs-setup-ns = <7>;
+					spi-cs-setup-delay-ns = <7>;
 					spi-tx-bus-width = <4>;
 					spi-rx-bus-width = <4>;
 					m25p,fast-read;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
index f3ffb8f01d8a..45edf6214cf7 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
@@ -37,7 +37,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
 					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
@@ -48,7 +48,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
index ef11606a82b3..0417f53b3e96 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -234,7 +234,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <104000000>;
-		spi-cs-setup-ns = <7>;
+		spi-cs-setup-delay-ns = <7>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		m25p,fast-read;
@@ -385,7 +385,7 @@
 
 	wilc: wifi@0 {
 		reg = <0>;
-		compatible = "microchip,wilc1000";
+		compatible = "microchip,wilc3000", "microchip,wilc1000";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wilc_default>;
 		clocks = <&pmc PMC_TYPE_SYSTEM 9>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index 15239834d886..35a933eec573 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,6 +197,7 @@
 
 &sdmmc0 {
 	bus-width = <4>;
+	no-1-8-v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
index b6684bf67d3e..7be215781549 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
@@ -514,6 +514,7 @@
 
 &sdmmc0 {
 	bus-width = <4>;
+	no-1-8-v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	disable-wp;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
index 9fa6f1395aa6..fbae6a9af6c3 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
@@ -714,7 +714,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <104000000>;
-		spi-cs-setup-ns = <7>;
+		spi-cs-setup-delay-ns = <7>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
index e4ae60ef5f8a..10d69f6957cf 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
@@ -47,7 +47,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
@@ -58,7 +58,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
index 4bab3f25b855..7e77a55ed41d 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -46,7 +46,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
 					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
@@ -57,7 +57,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
index 5662992cf213..d2c43957497d 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
@@ -283,7 +283,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@600000 {
+		usb1: usb@600000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 3 GPIO_ACTIVE_LOW
@@ -294,7 +294,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@700000 {
+		usb2: usb@700000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
index 8adf567f2f0f..b9725e400501 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
@@ -22,7 +22,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_LOW
@@ -31,7 +31,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
index 95d701d13fef..0ecccb9a809d 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
@@ -164,7 +164,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_HIGH
@@ -175,7 +175,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
index 20ac775059ca..69107d6cd26c 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
@@ -198,7 +198,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
 					   &pioE 11 GPIO_ACTIVE_LOW
@@ -207,7 +207,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
new file mode 100644
index 000000000000..927c27260b6c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7d65_curiosity.dts - Device Tree file for SAMA7D65 Curiosity board
+ *
+ *  Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Romain Sioen <romain.sioen@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7d65-pinfunc.h"
+#include "sama7d65.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA7D65 Curiosity";
+	compatible = "microchip,sama7d65-curiosity", "microchip,sama7d65",
+		     "microchip,sama7d6", "microchip,sama7";
+
+	aliases {
+		serial0 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led0: led-red {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led1: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led2: led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2_default>;
+	status = "okay";
+};
+
+&can3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can3_default>;
+	status = "okay";
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6_default>;
+	status = "okay";
+};
+
+&flx10 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&eeprom0_eui48>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioa>;
+		interrupts = <PIN_PC1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c10 {
+	dmas = <0>, <0>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c10_default>;
+	status = "okay";
+
+	power-monitor@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDD3V3";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDIODDR";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDCORE";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDCPU";
+		};
+	};
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
+		status = "okay";
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddioddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1350000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1350000>;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcore: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1050000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcpu: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1050000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-suspend-microvolt = <1800000>;
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	eeprom0: eeprom@51 {
+		compatible = "microchip,24aa025e48";
+		reg = <0x51>;
+		size = <256>;
+		pagesize = <16>;
+		vcc-supply = <&vdd_3v3>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eeprom0_eui48: eui48@fa {
+				reg = <0xfa 0x6>;
+			};
+		};
+	};
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&pioa {
+	pinctrl_can1_default: can1-default {
+		pinmux = <PIN_PD10__CANTX1>,
+			 <PIN_PD11__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_can2_default: can2-default {
+		pinmux = <PIN_PD12__CANTX2>,
+			 <PIN_PD13__CANRX2>;
+		bias-disable;
+	};
+
+	pinctrl_can3_default: can3-default {
+		pinmux = <PIN_PD14__CANTX3>,
+			 <PIN_PD15__CANRX3>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0-default {
+		pinmux = <PIN_PA26__G0_TX0>,
+			 <PIN_PA27__G0_TX1>,
+			 <PIN_PB4__G0_TX2>,
+			 <PIN_PB5__G0_TX3>,
+			 <PIN_PA29__G0_RX0>,
+			 <PIN_PA30__G0_RX1>,
+			 <PIN_PB2__G0_RX2>,
+			 <PIN_PB6__G0_RX3>,
+			 <PIN_PA25__G0_TXCTL>,
+			 <PIN_PB3__G0_RXCK>,
+			 <PIN_PA28__G0_RXCTL>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0-mdio-default {
+		pinmux = <PIN_PA31__G0_MDC>,
+			 <PIN_PB0__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0-phy-irq {
+		pinmux = <PIN_PC1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0-txck-default {
+		pinmux = <PIN_PB1__G0_REFCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_i2c10_default: i2c10-default {
+		pinmux = <PIN_PB19__FLEXCOM10_IO1>,
+			 <PIN_PB20__FLEXCOM10_IO0>;
+		bias-pull-up;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PC10__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PB15__GPIO>,
+			 <PIN_PB17__GPIO>,
+			 <PIN_PA21__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		cmd-data {
+			pinmux = <PIN_PB22__SDMMC1_CMD>,
+				 <PIN_PB24__SDMMC1_DAT0>,
+				 <PIN_PB25__SDMMC1_DAT1>,
+				 <PIN_PB26__SDMMC1_DAT2>,
+				 <PIN_PB27__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-disable;
+		};
+
+		ck-cd-rstn-vddsel {
+			pinmux = <PIN_PB23__SDMMC1_CK>,
+				 <PIN_PB21__SDMMC1_RSTN>,
+				 <PIN_PB30__SDMMC1_1V8SEL>,
+				 <PIN_PB29__SDMMC1_CD>,
+				 <PIN_PB28__SDMMC1_WP>;
+			slew-rate = <0>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart6_default: uart6-default {
+		pinmux = <PIN_PD18__FLEXCOM6_IO0>,
+			 <PIN_PD19__FLEXCOM6_IO1>;
+		bias-disable;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
index 2dec2218f32c..eb5f27ce1942 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
@@ -369,6 +369,38 @@
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
+		label = "at91-qspi";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "qspi1: at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "qspi1: u-boot";
+				reg = <0x40000 0x100000>;
+			};
+
+			bootloaderenv@140000 {
+				label = "qspi1: u-boot env";
+				reg = <0x140000 0x40000>;
+			};
+
+			dtb@180000 {
+				label = "qspi1: device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "qspi1: kernel";
+				reg = <0x200000 0x600000>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
index 0f5e6ad438dd..3924f62ff0fb 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -35,16 +35,6 @@
 		i2c2 = &i2c9;
 	};
 
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -137,6 +127,7 @@
 	vref-supply = <&vddout25>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
 	status = "okay";
 };
 
@@ -555,6 +546,10 @@
 	pinctrl-0 = <&pinctrl_i2s0_default>;
 };
 
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
 &pdmc0 {
 	#sound-dai-cells = <0>;
 	microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
@@ -884,6 +879,10 @@
 	};
 };
 
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
 &spdifrx {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spdifrx_default>;
diff --git a/arch/arm/boot/dts/microchip/at91-vinco.dts b/arch/arm/boot/dts/microchip/at91-vinco.dts
index ecbdacf48708..c5fc51667066 100644
--- a/arch/arm/boot/dts/microchip/at91-vinco.dts
+++ b/arch/arm/boot/dts/microchip/at91-vinco.dts
@@ -162,7 +162,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_LOW
@@ -171,7 +171,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			/* 4G Modem */
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
index 02a838541dc3..e105ad855ce8 100644
--- a/arch/arm/boot/dts/microchip/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
@@ -702,7 +702,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@300000 {
+		usb0: usb@300000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00300000 0x100000>;
 			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -714,9 +714,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 25 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 26 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
index 0bf472b157a5..ce691c4692b9 100644
--- a/arch/arm/boot/dts/microchip/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
@@ -89,7 +89,7 @@
 			};
 		};
 
-		usb0: ohci@300000 {
+		usb0: usb@300000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
index 0038183e9a53..fc0b6a73204f 100644
--- a/arch/arm/boot/dts/microchip/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
@@ -742,7 +742,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -781,9 +781,8 @@
 
 	i2c_gpio0: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
index e8e65e60564d..8522a210b484 100644
--- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
@@ -131,7 +131,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
index b57a7fd67197..d1d678b77e84 100644
--- a/arch/arm/boot/dts/microchip/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
@@ -77,7 +77,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -655,8 +655,8 @@
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_bitbang>;
-		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 8 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/microchip/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
index a8f523131cd6..313bc2797fde 100644
--- a/arch/arm/boot/dts/microchip/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
@@ -31,7 +31,7 @@
 	};
 
 	ahb {
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
index b95d4016ae9f..a4b5d1f228f9 100644
--- a/arch/arm/boot/dts/microchip/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
@@ -768,7 +768,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@a00000 {
+		usb0: usb@a00000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00a00000 0x100000>;
 			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -826,9 +826,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
-			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index f25692543d71..93c5268a0845 100644
--- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -152,7 +152,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
@@ -207,7 +207,7 @@
 			};
 		};
 
-		usb0: ohci@a00000 {
+		usb0: usb@a00000 {
 			num-ports = <2>;
 			status = "okay";
 			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
index 4e7cfbbd4241..84a7287107f8 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
@@ -211,7 +211,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
index e0c1e8df81b1..947c011c1b00 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -46,7 +46,7 @@
 		led-power-green {
 			label = "smartgw:power:green";
 			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
+			linux,default-trigger = "timer";
 		};
 
 		led-power-red {
diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
index 157d306ef5c9..4e00ed2d3ecd 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
@@ -964,7 +964,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@700000 {
+		usb0: usb@700000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -973,7 +973,7 @@
 			status = "disabled";
 		};
 
-		usb1: ehci@800000 {
+		usb1: usb@800000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1010,9 +1010,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
index 071db4f16313..2a31b2f14893 100644
--- a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
@@ -303,14 +303,14 @@
 			};
 		};
 
-		usb0: ohci@700000 {
+		usb0: usb@700000 {
 			status = "okay";
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
 					   &pioD 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1: ehci@800000 {
+		usb1: usb@800000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
index 844bd50943fc..af41c3dbb4bf 100644
--- a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
@@ -748,7 +748,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x00100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -786,9 +786,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
index 643c3b2ab97e..b06a54e8e237 100644
--- a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
@@ -180,7 +180,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <1>;
 			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
 			status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
index 1fec9fcc7cd1..de74cf2980a0 100644
--- a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
@@ -833,8 +833,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
@@ -847,8 +847,8 @@
 
 	i2c-gpio-1 {
 		compatible = "i2c-gpio";
-		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
index 27c1f2861cc3..9070fd06995a 100644
--- a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
@@ -886,7 +886,7 @@
 			};
 		};
 
-		usb0: ohci@600000 {
+		usb0: usb@600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -895,7 +895,7 @@
 			status = "disabled";
 		};
 
-		usb1: ehci@700000 {
+		usb1: usb@700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -933,9 +933,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
@@ -948,9 +947,8 @@
 
 	i2c-gpio-1 {
 		compatible = "i2c-gpio";
-		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
-			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioC 1 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
@@ -963,9 +961,8 @@
 
 	i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
-			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/microchip/ethernut5.dts b/arch/arm/boot/dts/microchip/ethernut5.dts
index ad7a0850252a..52ccef31b391 100644
--- a/arch/arm/boot/dts/microchip/ethernut5.dts
+++ b/arch/arm/boot/dts/microchip/ethernut5.dts
@@ -101,7 +101,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/microchip/evk-pro3.dts b/arch/arm/boot/dts/microchip/evk-pro3.dts
index 6d519d02d190..40c5111c2f0a 100644
--- a/arch/arm/boot/dts/microchip/evk-pro3.dts
+++ b/arch/arm/boot/dts/microchip/evk-pro3.dts
@@ -45,7 +45,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/microchip/mpa1600.dts b/arch/arm/boot/dts/microchip/mpa1600.dts
index 005c2758e229..2a97e2c0b894 100644
--- a/arch/arm/boot/dts/microchip/mpa1600.dts
+++ b/arch/arm/boot/dts/microchip/mpa1600.dts
@@ -57,7 +57,7 @@
 			};
 		};
 
-		usb0: ohci@300000 {
+		usb0: usb@300000 {
 			num-ports = <1>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/microchip/pm9g45.dts b/arch/arm/boot/dts/microchip/pm9g45.dts
index c349fd3758a6..2258e62f5864 100644
--- a/arch/arm/boot/dts/microchip/pm9g45.dts
+++ b/arch/arm/boot/dts/microchip/pm9g45.dts
@@ -139,12 +139,12 @@
 			};
 		};
 
-		usb0: ohci@700000 {
+		usb0: usb@700000 {
 			status = "okay";
 			num-ports = <2>;
 		};
 
-		usb1: ehci@800000 {
+		usb1: usb@800000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 36944e18a329..b075865e6a76 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -88,7 +88,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@600000 {
+		usb1: usb@600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -97,7 +97,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@700000 {
+		usb2: usb@700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -197,6 +197,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -268,6 +270,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -768,6 +772,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -839,6 +845,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -910,6 +918,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
@@ -981,6 +991,8 @@
 					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
 					reg = <0x400 0x200>;
 					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 					clock-names = "spi_clk";
 					dmas = <&dma0
diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
index beb1f34b38d3..46dacbbd201d 100644
--- a/arch/arm/boot/dts/microchip/sam9x7.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
@@ -45,11 +45,13 @@
 	clocks {
 		slow_xtal: clock-slowxtal {
 			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
 			#clock-cells = <0>;
 		};
 
 		main_xtal: clock-mainxtal {
 			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
 			#clock-cells = <0>;
 		};
 	};
@@ -132,6 +134,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -151,6 +155,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -201,6 +207,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -220,6 +228,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -261,6 +271,27 @@
 			status = "disabled";
 		};
 
+		qspi: spi@f0014000 {
+			compatible = "microchip,sam9x7-ospi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xf0014000 0x100>, <0x60000000 0x20000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				AT91_XDMAC_DT_PERID(26))>,
+				<&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				AT91_XDMAC_DT_PERID(27))>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>;
+			clock-names = "pclk", "gclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 35>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_PLLADIV2>;
+			status = "disabled";
+		};
+
 		i2s: i2s@f001c000 {
 			compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
 			reg = <0xf001c000 0x100>;
@@ -312,6 +343,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -362,6 +395,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -533,6 +568,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -583,6 +620,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -633,6 +672,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -683,6 +724,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -702,6 +745,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -752,6 +797,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -771,6 +818,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -821,6 +870,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -840,6 +891,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -890,6 +943,8 @@
 				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
 				reg = <0x400 0x200>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "spi_clk";
 				dmas = <&dma0
@@ -909,6 +964,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -949,6 +1006,32 @@
 			status = "disabled";
 		};
 
+		hlcdc: hlcdc@f8038000 {
+			compatible = "microchip,sam9x75-xlcdc";
+			reg = <0xf8038000 0x4000>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+			clock-names = "periph_clk", "sys_clk", "slow_clk";
+			status = "disabled";
+
+			display-controller {
+				compatible = "atmel,hlcdc-display-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			pwm {
+				compatible = "atmel,hlcdc-pwm";
+				#pwm-cells = <3>;
+			};
+		};
+
 		flx9: flexcom@f8040000 {
 			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xf8040000 0x200>;
@@ -984,6 +1067,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -1034,6 +1119,8 @@
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -1049,6 +1136,15 @@
 			};
 		};
 
+		lvds_controller: lvds-controller@f8060000 {
+			compatible = "microchip,sam9x75-lvds";
+			reg = <0xf8060000 0x100>;
+			interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
 		matrix: matrix@ffffde00 {
 			compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
 			reg = <0xffffde00 0x200>;
diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi
index 3f99451aef83..fde890f18d20 100644
--- a/arch/arm/boot/dts/microchip/sama5d2.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi
@@ -32,6 +32,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			reg = <0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
 			next-level-cache = <&L2>;
 		};
 	};
@@ -136,7 +138,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00400000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -145,7 +147,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -160,6 +162,7 @@
 			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
 			cache-unified;
 			cache-level = <2>;
+			cache-size = <0x20000>;		// L2, 128 KB
 		};
 
 		ebi: ebi@10000000 {
@@ -568,7 +571,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(12))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -639,7 +642,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(14))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -851,7 +854,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(16))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -922,7 +925,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(18))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -994,7 +997,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(20))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi
index 70f380c399ce..00ba59ac1968 100644
--- a/arch/arm/boot/dts/microchip/sama5d3.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi
@@ -48,6 +48,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			reg = <0x0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
 		};
 	};
 
@@ -1074,7 +1076,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@600000 {
+		usb1: usb@600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1083,7 +1085,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@700000 {
+		usb2: usb@700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
index 3652c9e24124..90da04b84b39 100644
--- a/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
@@ -172,7 +172,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@600000 {
+		usb1: usb@600000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
 					   &pioD 26 GPIO_ACTIVE_LOW
@@ -181,7 +181,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@700000 {
+		usb2: usb@700000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi
index 355132628604..ec1d68c640de 100644
--- a/arch/arm/boot/dts/microchip/sama5d4.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi
@@ -50,6 +50,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			reg = <0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
 			next-level-cache = <&L2>;
 		};
 	};
@@ -119,7 +121,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -128,7 +130,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -143,6 +145,7 @@
 			interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
 			cache-unified;
 			cache-level = <2>;
+			cache-size = <0x20000>;		// L2, 128 KB
 		};
 
 		ebi: ebi@10000000 {
diff --git a/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h
new file mode 100644
index 000000000000..c591f333cacb
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h
@@ -0,0 +1,947 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__NWER0			PINMUX_PIN(PIN_PA0, 3, 1)
+
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__A21			PINMUX_PIN(PIN_PA1, 3, 1)
+
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__A22			PINMUX_PIN(PIN_PA2, 3, 1)
+
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D0			PINMUX_PIN(PIN_PA3, 3, 1)
+
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D1			PINMUX_PIN(PIN_PA4, 3, 1)
+
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT4		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA5, 2, 3)
+#define PIN_PA5__D4			PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__TCLK4			PINMUX_PIN(PIN_PA5, 6, 3)
+
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT5		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA6, 2, 3)
+#define PIN_PA6__D5			PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__TIOB4			PINMUX_PIN(PIN_PA6, 6, 3)
+
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT6		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA7, 2, 3)
+#define PIN_PA7__D6			PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__TIOA4			PINMUX_PIN(PIN_PA7, 6, 3)
+
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT7		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA8, 2, 3)
+#define PIN_PA8__D7			PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__TIOA5			PINMUX_PIN(PIN_PA8, 6, 3)
+
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT2		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__D2			PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__TIOB5			PINMUX_PIN(PIN_PA9, 6, 3)
+
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT3		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__D3			PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__TCLK5			PINMUX_PIN(PIN_PA10, 6, 3)
+
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__NANDRDY		PINMUX_PIN(PIN_PA11, 3, 1)
+#define PIN_PA11__TIOB3			PINMUX_PIN(PIN_PA11, 6, 3)
+
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD			PINMUX_PIN(PIN_PA12, 3, 1)
+#define PIN_PA12__PCK0			PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__EXT_IRQ0		PINMUX_PIN(PIN_PA12, 5, 1)
+#define PIN_PA12__TIOA3			PINMUX_PIN(PIN_PA12, 6, 3)
+
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__NCS0			PINMUX_PIN(PIN_PA13, 3, 1)
+#define PIN_PA13__PCK1			PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__TCLK3			PINMUX_PIN(PIN_PA13, 6, 3)
+
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__SDMMC0_WP		PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA14, 3, 4)
+
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA15, 3, 4)
+
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__SDMMCo_CD		PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__PCK2			PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__EXT_IRQ1		PINMUX_PIN(PIN_PA16, 5, 1)
+
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA17, 1, 1)
+
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA18, 1, 1)
+
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__TK0			PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM4_IO5		PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__PWML0			PINMUX_PIN(PIN_PA19, 4, 3)
+
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__TD0			PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA20, 2, 2)
+#define PIN_PA20__FLEXCOM4_IO6		PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__PWMH0			PINMUX_PIN(PIN_PA20, 4, 3)
+
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__TF0			PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA21, 2, 2)
+#define PIN_PA21__PWML1			PINMUX_PIN(PIN_PA21, 4, 3)
+
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__RD0			PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA22, 2, 2)
+#define PIN_PA22__PDMC0_DS1		PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__PWMH1			PINMUX_PIN(PIN_PA22, 4, 3)
+
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__RK0			PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA23, 2, 2)
+#define PIN_PA23__PDMC0_CLK		PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__PWML2			PINMUX_PIN(PIN_PA23, 4, 3)
+
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__RF0			PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA24, 2, 2)
+#define PIN_PA24__PDMC0_DS0		PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__PWMH2			PINMUX_PIN(PIN_PA24, 4, 3)
+
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_TXCTL		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA25, 2, 1)
+
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX0		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM6_IO3		PINMUX_PIN(PIN_PA26, 2, 1)
+
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX1		PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA27, 2, 1)
+
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RXCTL		PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
+
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX0		PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
+
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RX1		PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA30, 2, 1)
+
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_MDC		PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA31, 2, 1)
+
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_MDIO		PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
+
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_REFCK		PINMUX_PIN(PIN_PB1, 1, 2)
+#define PIN_PB1__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB1, 2, 1)
+
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_RX2			PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__G0_RXER		PINMUX_PIN(PIN_PB2, 3, 2)
+#define PIN_PB2__RK0			PINMUX_PIN(PIN_PB2, 4, 2)
+
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__G0_RXCK		PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB3, 2, 2)
+#define PIN_PB3__TK0			PINMUX_PIN(PIN_PB3, 4, 2)
+
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__G0_TX2			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB4, 2, 2)
+#define PIN_PB4__TF0			PINMUX_PIN(PIN_PB4, 4, 2)
+
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__G0_TX3			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__TD0			PINMUX_PIN(PIN_PB5, 4, 2)
+
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__G0_RX3			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB6, 2, 2)
+#define PIN_PB6__RD0			PINMUX_PIN(PIN_PB6, 4, 2)
+
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__G0_TSUCOMP		PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB7, 2, 2)
+#define PIN_PB7__ADTRG			PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__RF0			PINMUX_PIN(PIN_PB7, 4, 2)
+
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__QSPI0_IO3		PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__PCK3			PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PB8, 4, 2)
+
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO2		PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM2_IO0		PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__PWMEXTRG0		PINMUX_PIN(PIN_PB9, 5, 1)
+
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO1		PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM2_IO4		PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__PWMEXTRG1		PINMUX_PIN(PIN_PB10, 5, 1)
+
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO0		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM2_IO5		PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__PWML3			PINMUX_PIN(PIN_PB11, 5, 1)
+#define PIN_PB11__TIOB3			PINMUX_PIN(PIN_PB11, 6, 2)
+
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_CS		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM2_IO3		PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__PWMFI1		PINMUX_PIN(PIN_PB12, 6, 1)
+#define PIN_PB12__TIOA3			PINMUX_PIN(PIN_PB12, 6, 2)
+
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_SCK		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM2_IO2		PINMUX_PIN(PIN_PB13, 4, 2)
+#define PIN_PB13__PWMFI0		PINMUX_PIN(PIN_PB13, 5, 1)
+#define PIN_PB13__TCLK3			PINMUX_PIN(PIN_PB13, 6, 2)
+
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCKN		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__QSPI1_SCK		PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__I2SMCC0_CK		PINMUX_PIN(PIN_PB14, 3, 3)
+#define PIN_PB14__FLEXCOM10_IO5		PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH3			PINMUX_PIN(PIN_PB14, 5, 1)
+#define PIN_PB14__FLEXCOM2_IO1		PINMUX_PIN(PIN_PB14, 7, 4)
+
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_IO4		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__QSPI1_IO0		PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__I2SMCC0_WS		PINMUX_PIN(PIN_PB15, 3, 3)
+#define PIN_PB15__FLEXCOM10_IO6		PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML0			PINMUX_PIN(PIN_PB15, 5, 1)
+#define PIN_PB15__TCLK4			PINMUX_PIN(PIN_PB15, 6, 2)
+#define PIN_PB15__FLEXCOM2_IO0		PINMUX_PIN(PIN_PB15, 7, 4)
+
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO5		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__QSPI1_IO1		PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__I2SMCC0_DIN0		PINMUX_PIN(PIN_PB16, 3, 3)
+#define PIN_PB16__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH0			PINMUX_PIN(PIN_PB16, 5, 1)
+#define PIN_PB16__TIOB4			PINMUX_PIN(PIN_PB16, 6, 2)
+
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO6		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__QSPI1_IO2		PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB17, 3, 3)
+#define PIN_PB17__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWML1			PINMUX_PIN(PIN_PB17, 5, 1)
+#define PIN_PB17__TIOA4			PINMUX_PIN(PIN_PB17, 6, 2)
+
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO7		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__QSPI1_IO3		PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__I2SMCC0_MCK		PINMUX_PIN(PIN_PB18, 3, 3)
+#define PIN_PB18__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMH1			PINMUX_PIN(PIN_PB18, 5, 1)
+#define PIN_PB18__TIOA5			PINMUX_PIN(PIN_PB18, 6, 2)
+
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_DQS		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__EXT_IRQ1		PINMUX_PIN(PIN_PB19, 2, 2)
+#define PIN_PB19__PCK4			PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWML2			PINMUX_PIN(PIN_PB19, 5, 1)
+#define PIN_PB19__TIOB5			PINMUX_PIN(PIN_PB19, 6, 2)
+
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_INT		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__QSPI1_CS		PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMH2			PINMUX_PIN(PIN_PB20, 5, 1)
+#define PIN_PB20__TCLK5			PINMUX_PIN(PIN_PB20, 6, 2)
+
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__SDMMC1_RSTN		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM6_IO4		PINMUX_PIN(PIN_PB21, 2, 2)
+#define PIN_PB21__TIOB2			PINMUX_PIN(PIN_PB21, 3, 2)
+#define PIN_PB21__ADTRG			PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__EXT_IRQ0		PINMUX_PIN(PIN_PB21, 5, 2)
+
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__SDMMC1_CMD		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB22, 2, 2)
+#define PIN_PB22__TCLK2			PINMUX_PIN(PIN_PB22, 3, 2)
+
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__SDMMC1_CK		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM6_IO2		PINMUX_PIN(PIN_PB23, 2, 2)
+#define PIN_PB23__TIOA2			PINMUX_PIN(PIN_PB23, 3, 2)
+
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__SDMMC1_DAT0		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB24, 2, 2)
+
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__SDMMC1_DAT1		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB25, 2, 2)
+#define PIN_PB25__TIOB2			PINMUX_PIN(PIN_PB25, 3, 1)
+
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__SDMMC1_DAT2		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB26, 2, 3)
+#define PIN_PB26__TCLK2			PINMUX_PIN(PIN_PB26, 3, 1)
+
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__SDMMC1_DAT3		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB27, 2, 3)
+#define PIN_PB27__TIOA2			PINMUX_PIN(PIN_PB27, 3, 1)
+
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_WP		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__FLEXCOM1_IO0		PINMUX_PIN(PIN_PB28, 3, 3)
+#define PIN_PB28__D15			PINMUX_PIN(PIN_PB28, 5, 1)
+
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CD		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__I2SMCC0_MCK		PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM1_IO1		PINMUX_PIN(PIN_PB29, 3, 3)
+#define PIN_PB29__D14			PINMUX_PIN(PIN_PB29, 5, 2)
+
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__I2SMCC1_MCK		PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM1_IO2		PINMUX_PIN(PIN_PB30, 3, 3)
+#define PIN_PB30__TIOA1			PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__NCS1			PINMUX_PIN(PIN_PB30, 5, 1)
+
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__PCK7			PINMUX_PIN(PIN_PB31, 1, 2)
+#define PIN_PB31__I2SMCC1_DIN1		PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM1_IO3		PINMUX_PIN(PIN_PB31, 3, 3)
+#define PIN_PB31__TCLK1			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__NWE			PINMUX_PIN(PIN_PB31, 5, 2)
+
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__PCK6			PINMUX_PIN(PIN_PC0, 1, 2)
+#define PIN_PC0__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC0, 3, 2)
+#define PIN_PC0__TIOB1			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__NWR1			PINMUX_PIN(PIN_PC0, 5, 1)
+
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__PCK5			PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC1, 3, 2)
+#define PIN_PC1__SMCK			PINMUX_PIN(PIN_PC1, 5, 1)
+
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__EXT_IRQ0		PINMUX_PIN(PIN_PC2, 1, 3)
+#define PIN_PC2__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC2, 3, 2)
+#define PIN_PC2__A11			PINMUX_PIN(PIN_PC2, 5, 1)
+
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SPDIF_RX		PINMUX_PIN(PIN_PC3, 1, 2)
+#define PIN_PC3__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC3, 3, 2)
+#define PIN_PC3__FLEXCOM0_IO4		PINMUX_PIN(PIN_PC3, 4, 2)
+#define PIN_PC3__A10			PINMUX_PIN(PIN_PC3, 5, 1)
+
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SPDIF_TX		PINMUX_PIN(PIN_PC4, 1, 2)
+#define PIN_PC4__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__FLEXCOM0_IO3		PINMUX_PIN(PIN_PC4, 4, 2)
+#define PIN_PC4__D0			PINMUX_PIN(PIN_PC4, 5, 2)
+
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__I3CC_SDASPUE		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PC5, 4, 2)
+#define PIN_PC5__D1			PINMUX_PIN(PIN_PC5, 5, 2)
+
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__I3CC_SCL		PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__FLEXCOM0_IO1		PINMUX_PIN(PIN_PC6, 4, 2)
+#define PIN_PC6__D4			PINMUX_PIN(PIN_PC6, 5, 2)
+
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I3CC_SDA		PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM0_IO0		PINMUX_PIN(PIN_PC7, 4, 2)
+#define PIN_PC7__D5			PINMUX_PIN(PIN_PC7, 5, 2)
+
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__PDMC0_DS1		PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC8__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC8, 4, 1)
+#define PIN_PC8__D6			PINMUX_PIN(PIN_PC8, 5, 2)
+
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__PDMC0_CLK		PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PC9, 3, 1)
+#define PIN_PC9__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC9, 4, 1)
+#define PIN_PC9__D7			PINMUX_PIN(PIN_PC9, 5, 2)
+
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__PDMC0_DS0		PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC10, 4, 1)
+#define PIN_PC10__D2			PINMUX_PIN(PIN_PC10, 5, 2)
+
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__PDMC1_DS0		PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC11, 4, 1)
+#define PIN_PC10__D3			PINMUX_PIN(PIN_PC10, 5, 2)
+
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__PDMC1_CLK		PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__A9			PINMUX_PIN(PIN_PC12, 5, 1)
+
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__PDMC1_DS1		PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__A8			PINMUX_PIN(PIN_PC13, 5, 1)
+
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__SPDIF_RX		PINMUX_PIN(PIN_PC14, 2, 3)
+#define PIN_PC14__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC14, 3, 2)
+#define PIN_PC14__A7			PINMUX_PIN(PIN_PC14, 5, 1)
+
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_WS		PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__PDMC1_DS1		PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC15, 3, 2)
+#define PIN_PC15__A6			PINMUX_PIN(PIN_PC15, 5, 1)
+
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC1_CK		PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__PDMC1_CLK		PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM1_IO2		PINMUX_PIN(PIN_PC16, 3, 2)
+#define PIN_PC16__TIOA1			PINMUX_PIN(PIN_PC16, 4, 2)
+#define PIN_PC16__A5			PINMUX_PIN(PIN_PC16, 5, 1)
+
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__PDMC1_DS0		PINMUX_PIN(PIN_PC17, 2, 2)
+#define PIN_PC17__FLEXCOM1_IO3		PINMUX_PIN(PIN_PC17, 3, 2)
+#define PIN_PC17__TCLK1			PINMUX_PIN(PIN_PC17, 4, 2)
+#define PIN_PC17__A4			PINMUX_PIN(PIN_PC17, 5, 1)
+
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__SPDIF_TX		PINMUX_PIN(PIN_PC18, 2, 3)
+#define PIN_PC18__FLEXCOM1_IO4		PINMUX_PIN(PIN_PC18, 3, 2)
+#define PIN_PC18__TIOB1			PINMUX_PIN(PIN_PC18, 4, 2)
+#define PIN_PC18__A3			PINMUX_PIN(PIN_PC18, 5, 1)
+
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC0_WS		PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__PCK6			PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__A2			PINMUX_PIN(PIN_PC19, 5, 1)
+
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__A1			PINMUX_PIN(PIN_PC20, 5, 1)
+
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC0_CK		PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__PCK7			PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__A0			PINMUX_PIN(PIN_PC21, 5, 1)
+
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__NTRST			PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__NWAIT			PINMUX_PIN(PIN_PC22, 5, 1)
+
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__TCK_SWCLK		PINMUX_PIN(PIN_PC23, 1, 1)
+
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__TMS_SWDIO		PINMUX_PIN(PIN_PC24, 1, 1)
+
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__TDI			PINMUX_PIN(PIN_PC25, 1, 1)
+
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TDO			PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC26__A15			PINMUX_PIN(PIN_PC26, 5, 1)
+
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__SDMMC2_CMD		PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC27, 2, 2)
+#define PIN_PC27__TD1			PINMUX_PIN(PIN_PC27, 4, 2)
+#define PIN_PC27__D8			PINMUX_PIN(PIN_PC27, 5, 1)
+
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__SDMMC2_CK		PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC28, 2, 2)
+#define PIN_PC28__TF1			PINMUX_PIN(PIN_PC28, 4, 2)
+#define PIN_PC28__D9			PINMUX_PIN(PIN_PC28, 5, 1)
+
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__SDMMC2_DAT0		PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC29__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC29, 2, 2)
+#define PIN_PC29__TK1			PINMUX_PIN(PIN_PC29, 4, 2)
+#define PIN_PC29__D10			PINMUX_PIN(PIN_PC29, 5, 1)
+#define PIN_PC29__TCLK0			PINMUX_PIN(PIN_PC29, 6, 1)
+
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__SDMMC2_DAT1		PINMUX_PIN(PIN_PC30, 1, 1)
+#define PIN_PC30__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC30__RD1			PINMUX_PIN(PIN_PC30, 4, 2)
+#define PIN_PC30__D11			PINMUX_PIN(PIN_PC30, 5, 1)
+#define PIN_PC30__TIOA0			PINMUX_PIN(PIN_PC30, 6, 1)
+
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__SDMMC2_DAT2		PINMUX_PIN(PIN_PC31, 1, 1)
+#define PIN_PC31__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PC31__PCK0			PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__RK1			PINMUX_PIN(PIN_PC31, 4, 2)
+#define PIN_PC31__D12			PINMUX_PIN(PIN_PC31, 5, 1)
+#define PIN_PC31__TIOB0			PINMUX_PIN(PIN_PC31, 6, 1)
+
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__SDMMC2_DAT3		PINMUX_PIN(PIN_PD0, 1, 1)
+#define PIN_PD0__PCK1			PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__RF1			PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__D13			PINMUX_PIN(PIN_PD0, 5, 1)
+
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__SDMMC2_WP		PINMUX_PIN(PIN_PD1, 1, 1)
+#define PIN_PD1__FLEXCOM1_IO5		PINMUX_PIN(PIN_PD1, 2, 1)
+#define PIN_PD1__LCDC_HSYNC		PINMUX_PIN(PIN_PD1, 3, 2)
+#define PIN_PD1__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD1, 4, 3)
+
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_CD		PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__FLEXCOM1_IO6		PINMUX_PIN(PIN_PD2, 2, 1)
+#define PIN_PD2__LCDC_VSYNC		PINMUX_PIN(PIN_PD2, 3, 2)
+#define PIN_PD2__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD2, 4, 3)
+
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD3, 2, 1)
+#define PIN_PD3__TIOA0			PINMUX_PIN(PIN_PD3, 3, 2)
+#define PIN_PD3__FLEXCOM3_IO2		PINMUX_PIN(PIN_PD3, 4, 3)
+#define PIN_PD3__EXT_IRQ1		PINMUX_PIN(PIN_PD3, 5, 3)
+
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__LCDC_HSYNC		PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__TIOB0			PINMUX_PIN(PIN_PD4, 3, 2)
+#define PIN_PD4__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD4, 4, 3)
+
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__LCDC_VSYNC		PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__TCLK0			PINMUX_PIN(PIN_PD5, 3, 2)
+#define PIN_PD5__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD5, 4, 3)
+
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__LCDC_PWM		PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD6, 4, 3)
+
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__LCDC_DISP		PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD7, 2, 1)
+#define PIN_PD7__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD7, 4, 3)
+
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__CANTX0			PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD8, 2, 1)
+
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__CANRX0			PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD9, 2, 1)
+
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__CANTX1		PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD10, 2, 1)
+#define PIN_PD10__TIOA1			PINMUX_PIN(PIN_PD10, 3, 3)
+
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__CANRX1		PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD11, 2, 1)
+#define PIN_PD11__TCLK1			PINMUX_PIN(PIN_PD11, 3, 3)
+
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__CANTX2		PINMUX_PIN(PIN_PD12, 1, 1)
+#define PIN_PD12__FLEXCOM7_IO4		PINMUX_PIN(PIN_PD12, 2, 1)
+#define PIN_PD12__TIOB1			PINMUX_PIN(PIN_PD12, 3, 3)
+#define PIN_PD12__PCK2			PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__FLEXCOM3_IO3		PINMUX_PIN(PIN_PD12, 5, 3)
+
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__CANRX2		PINMUX_PIN(PIN_PD13, 1, 1)
+#define PIN_PD13__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD13, 2, 1)
+#define PIN_PD13__TIOA2			PINMUX_PIN(PIN_PD13, 3, 3)
+#define PIN_PD13__PCK3			PINMUX_PIN(PIN_PD13, 4, 2)
+
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__CANTX3		PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD14, 2, 1)
+#define PIN_PD14__TIOB2			PINMUX_PIN(PIN_PD14, 3, 3)
+
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__CANRX3		PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD15, 2, 1)
+#define PIN_PD15__TCLK2			PINMUX_PIN(PIN_PD15, 3, 3)
+
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__CANTX4		PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD16, 2, 1)
+
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__CANRX4		PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD17, 2, 1)
+
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD18, 2, 4)
+#define PIN_PD18__CANTX1		PINMUX_PIN(PIN_PD18, 3, 2)
+#define PIN_PD18__PCK4			PINMUX_PIN(PIN_PD18, 4, 2)
+
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD19, 2, 4)
+#define PIN_PD19__CANRX1		PINMUX_PIN(PIN_PD19, 3, 2)
+#define PIN_PD19__PCK2			PINMUX_PIN(PIN_PD19, 4, 3)
+
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PFLEXCOM6_IO2		PINMUX_PIN(PIN_PD20, 2, 4)
+#define PIN_PD20__I2SMCC1_MCK		PINMUX_PIN(PIN_PD20, 3, 2)
+#define PIN_PD20__PCK3			PINMUX_PIN(PIN_PD20, 4, 3)
+
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__G1_TXCTL		PINMUX_PIN(PIN_PD21, 1, 2)
+#define PIN_PD21__FLEXCOM6_IO2		PINMUX_PIN(PIN_PD21, 2, 3)
+#define PIN_PD21__TK1			PINMUX_PIN(PIN_PD21, 3, 1)
+
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 1, 1)
+#define PIN_PD22__FLEXCOM6_IO3		PINMUX_PIN(PIN_PD22, 2, 3)
+#define PIN_PD22__TF1			PINMUX_PIN(PIN_PD22, 3, 1)
+
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 1, 1)
+#define PIN_PD23__FLEXCOM6_IO4		PINMUX_PIN(PIN_PD23, 2, 3)
+#define PIN_PD23__TD1			PINMUX_PIN(PIN_PD23, 3, 1)
+
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__G1_RXCTL		PINMUX_PIN(PIN_PD24, 1, 1)
+#define PIN_PD24__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD24, 2, 3)
+#define PIN_PD24__RD1			PINMUX_PIN(PIN_PD24, 3, 1)
+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 5, 3)
+
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__G1_MDC		PINMUX_PIN(PIN_PD25, 1, 1)
+#define PIN_PD25__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD25, 2, 3)
+#define PIN_PD25__RK1			PINMUX_PIN(PIN_PD25, 3, 1)
+#define PIN_PD25__PDMC0_CLK		PINMUX_PIN(PIN_PD25, 5, 3)
+
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__G1_MDIO		PINMUX_PIN(PIN_PD26, 1, 1)
+#define PIN_PD26__FLEXCOM7_IO4		PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__RF1			PINMUX_PIN(PIN_PD26, 3, 1)
+#define PIN_PD26__I2SMCC1_DIN2		PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__PDMC0_DS0		PINMUX_PIN(PIN_PD26, 5, 3)
+
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__G1_RX0		PINMUX_PIN(PIN_PD27, 1, 1)
+#define PIN_PD27__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__SPDIF_RX		PINMUX_PIN(PIN_PD27, 3, 1)
+#define PIN_PD27__I2SMCC1_DIN3		PINMUX_PIN(PIN_PD27, 4, 2)
+
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__G1_RX1		PINMUX_PIN(PIN_PD28, 1, 1)
+#define PIN_PD28__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__SPDIF_TX		PINMUX_PIN(PIN_PD28, 3, 1)
+#define PIN_PD28__I2SMCC1_DIN1		PINMUX_PIN(PIN_PD28, 4, 2)
+
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__G1_REFCK		PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PD29, 3, 2)
+
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__G1_RX2		PINMUX_PIN(PIN_PD30, 1, 1)
+#define PIN_PD30__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__PDMC1_DS1		PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__G1_RXER		PINMUX_PIN(PIN_PD30, 5, 2)
+
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__G1_RX3		PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__PDMC1_DS0		PINMUX_PIN(PIN_PD31, 4, 3)
+
+#define PIN_PE0				128
+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__G1_TX2			PINMUX_PIN(PIN_PE0, 1, 1)
+#define PIN_PE0__FLEXCOM5_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE0, 3, 2)
+#define PIN_PE0__PDMC1_CLK		PINMUX_PIN(PIN_PE0, 4, 3)
+
+#define PIN_PE1				129
+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__G1_TX3			PINMUX_PIN(PIN_PE1, 1, 1)
+#define PIN_PE1__FLEXCOM5_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__I2SMCC1_WS		PINMUX_PIN(PIN_PE1, 3, 2)
+#define PIN_PE1__PDMC0_DS1		PINMUX_PIN(PIN_PE1, 4, 4)
+
+#define PIN_PE2				130
+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__G1_RXCK		PINMUX_PIN(PIN_PE2, 1, 1)
+#define PIN_PE2__FLEXCOM5_IO1		PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__I2SMCC1_CK		PINMUX_PIN(PIN_PE2, 3, 2)
+#define PIN_PE2__PDMC0_CLK		PINMUX_PIN(PIN_PE2, 4, 4)
+
+#define PIN_PE3				131
+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__G1_TSUCOMP		PINMUX_PIN(PIN_PE3, 1, 1)
+#define PIN_PE3__FLEXCOM5_IO0		PINMUX_PIN(PIN_PE3, 2, 2)
+#define PIN_PE3__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PE3, 3, 2)
+#define PIN_PE3__PDMC0_DS0		PINMUX_PIN(PIN_PE3, 4, 4)
+
+#define PIN_PE4				132
+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__LCDC_DAT0		PINMUX_PIN(PIN_PE4, 1, 1)
+#define PIN_PE4__FLEXCOM2_IO2		PINMUX_PIN(PIN_PE4, 2, 1)
+#define PIN_PE4__PWML0			PINMUX_PIN(PIN_PE4, 3, 2)
+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 4, 1)
+#define PIN_PE4__I2SMCC0_DIN1		PINMUX_PIN(PIN_PE4, 5, 2)
+
+#define PIN_PE5				133
+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__LCDC_DAT1		PINMUX_PIN(PIN_PE5, 1, 1)
+#define PIN_PE5__FLEXCOM2_IO3		PINMUX_PIN(PIN_PE5, 2, 1)
+#define PIN_PE5__PWMH0			PINMUX_PIN(PIN_PE5, 3, 2)
+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 4, 1)
+#define PIN_PE5__I2SMCC0_DIN2		PINMUX_PIN(PIN_PE5, 5, 2)
+
+#define PIN_PE6				134
+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__LCDC_DAT2		PINMUX_PIN(PIN_PE6, 1, 1)
+#define PIN_PE6__FLEXCOM2_IO4		PINMUX_PIN(PIN_PE6, 2, 1)
+#define PIN_PE6__PWML1			PINMUX_PIN(PIN_PE6, 3, 2)
+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 4, 1)
+#define PIN_PE6__I2SMCC0_DIN3		PINMUX_PIN(PIN_PE6, 5, 2)
+
+#define PIN_PE7				135
+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__LCDC_DAT3		PINMUX_PIN(PIN_PE7, 1, 1)
+#define PIN_PE7__FLEXCOM2_IO5		PINMUX_PIN(PIN_PE7, 2, 1)
+#define PIN_PE7__PWMH1			PINMUX_PIN(PIN_PE7, 3, 2)
+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 4, 1)
+#define PIN_PE7__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PE7, 5, 2)
+
+#define PIN_PE8				136
+#define PIN_PE8__GPIO			PINMUX_PIN(PIN_PE8, 0, 0)
+#define PIN_PE8__LCDC_DAT4		PINMUX_PIN(PIN_PE8, 1, 1)
+#define PIN_PE8__FLEXCOM2_IO0		PINMUX_PIN(PIN_PE8, 2, 1)
+#define PIN_PE8__PWML2			PINMUX_PIN(PIN_PE8, 3, 2)
+#define PIN_PE8__TIOB4			PINMUX_PIN(PIN_PE8, 4, 1)
+#define PIN_PE8__I2SMCC0_CK		PINMUX_PIN(PIN_PE8, 5, 2)
+
+#define PIN_PE9				137
+#define PIN_PE9__GPIO			PINMUX_PIN(PIN_PE9, 0, 0)
+#define PIN_PE9__LCDC_DAT5		PINMUX_PIN(PIN_PE9, 1, 1)
+#define PIN_PE9__FLEXCOM2_IO1		PINMUX_PIN(PIN_PE9, 2, 1)
+#define PIN_PE9__PWMH2			PINMUX_PIN(PIN_PE9, 3, 2)
+#define PIN_PE9__TCLK4			PINMUX_PIN(PIN_PE9, 4, 1)
+#define PIN_PE9__I2SMCC0_WS		PINMUX_PIN(PIN_PE9, 5, 2)
+
+#define PIN_PE10			138
+#define PIN_PE10__GPIO			PINMUX_PIN(PIN_PE10, 0, 0)
+#define PIN_PE10__LCDC_DAT6		PINMUX_PIN(PIN_PE10, 1, 1)
+#define PIN_PE10__FLEXCOM2_IO6		PINMUX_PIN(PIN_PE10, 2, 1)
+#define PIN_PE10__PWML3			PINMUX_PIN(PIN_PE10, 3, 2)
+#define PIN_PE10__TIOA5			PINMUX_PIN(PIN_PE10, 4, 1)
+#define PIN_PE10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PE10, 5, 2)
+
+#define PIN_PE11			139
+#define PIN_PE11__GPIO			PINMUX_PIN(PIN_PE11, 0, 0)
+#define PIN_PE11__LCDC_DAT7		PINMUX_PIN(PIN_PE11, 1, 1)
+#define PIN_PE11__PWMH3			PINMUX_PIN(PIN_PE11, 3, 2)
+#define PIN_PE11__TIOB5			PINMUX_PIN(PIN_PE11, 4, 1)
+#define PIN_PE11__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PE11, 5, 2)
+
+#define PIN_PE12			140
+#define PIN_PE12__GPIO			PINMUX_PIN(PIN_PE12, 0, 0)
+#define PIN_PE12__LCDC_DEN		PINMUX_PIN(PIN_PE12, 1, 1)
+#define PIN_PE12__PCK3			PINMUX_PIN(PIN_PE12, 2, 4)
+#define PIN_PE12__PWMEXTRG0		PINMUX_PIN(PIN_PE12, 3, 2)
+#define PIN_PE12__TCLK5			PINMUX_PIN(PIN_PE12, 4, 1)
+#define PIN_PE12__I2SMCC0_DIN0		PINMUX_PIN(PIN_PE12, 5, 2)
+
+#define PIN_PE13			141
+#define PIN_PE13__GPIO			PINMUX_PIN(PIN_PE13, 0, 0)
+#define PIN_PE13__LCDC_PCK		PINMUX_PIN(PIN_PE13, 1, 1)
+#define PIN_PE13__PCK4			PINMUX_PIN(PIN_PE13, 2, 3)
+#define PIN_PE13__PWMEXTRG1		PINMUX_PIN(PIN_PE13, 3, 2)
+#define PIN_PE13__I2SMCC0DOUT0		PINMUX_PIN(PIN_PE13, 5, 2)
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
new file mode 100644
index 000000000000..cd2cf9a6f40b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -0,0 +1,740 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  sama7d65.dtsi - Device Tree Include file for SAMA7D65 SoC
+ *
+ *  Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Ryan Wanner <Ryan.Wanner@microchip.com>
+ *
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	model = "Microchip SAMA7D65 family SoC";
+	compatible = "microchip,sama7d65";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			device_type = "cpu";
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+			next-level-cache = <&L2>;
+
+			L2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>; // L2, 256 KB
+				cache-unified;
+			};
+		};
+	};
+
+	clocks {
+		main_xtal: clock-mainxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
+			#clock-cells = <0>;
+		};
+
+		slow_xtal: clock-slowxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
+			#clock-cells = <0>;
+		};
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		reg = <0x100000 0x20000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		securam: sram@e0000800 {
+			compatible = "microchip,sama7d65-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000800 0x4000>;
+			ranges = <0 0xe0000800 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			no-memory-wc;
+		};
+
+		secumod: security-module@e0004000 {
+			compatible = "microchip,sama7d65-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pioa: pinctrl@e0014000 {
+			compatible = "microchip,sama7d65-pinctrl", "microchip,sama7g5-pinctrl";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc: clock-controller@e0018000 {
+			compatible = "microchip,sama7d65-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		ps_wdt: watchdog@e001d000 {
+			compatible = "microchip,sama7d65-wdt", "microchip,sama7g5-wdt";
+			reg = <0xe001d000 0x30>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		reset_controller: reset-controller@e001d100 {
+			compatible = "microchip,sama7d65-rstc", "microchip,sama7g5-rstc";
+			reg = <0xe001d100 0xc>, <0xe001d1e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
+		shdwc: poweroff@e001d200 {
+			compatible = "microchip,sama7d65-shdwc", "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d200 0x20>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@e001d300 {
+			compatible = "microchip,sama7d65-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d300 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@e001d500 {
+			compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d500 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: syscon@e001d700 {
+			compatible = "microchip,sama7d65-gpbr", "syscon";
+			reg = <0xe001d700 0x48>;
+		};
+
+		rtc: rtc@e001d800 {
+			compatible = "microchip,sama7d65-rtc", "microchip,sam9x60-rtc";
+			reg = <0xe001d800 0x30>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		chipid@e0020000 {
+			compatible = "microchip,sama7d65-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x200>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 58>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x200>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 59>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x200>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 60>, <&pmc PMC_TYPE_GCK 60>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 60>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x200>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x200>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7d65-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 76>, <&pmc PMC_TYPE_GCK 76>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 76>;
+			assigned-clock-rates = <200000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+		};
+
+		aes: crypto@e1600000 {
+			compatible = "microchip,sama7d65-aes", "atmel,at91sam9g46-aes";
+			reg = <0xe1600000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1604000 {
+			compatible = "microchip,sama7d65-sha", "atmel,at91sam9g46-sha";
+			reg = <0xe1604000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
+		tdes: crypto@e1608000 {
+			compatible = "microchip,sama7d65-tdes", "atmel,at91sam9g46-tdes";
+			reg = <0xe1608000 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
+		trng: rng@e160c000 {
+			compatible = "microchip,sama7d65-trng", "microchip,sam9x60-trng";
+			reg = <0xe160c000 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 92>;
+		};
+
+		dma0: dma-controller@e1610000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1610000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e1614000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1614000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@e1618000 {
+			compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem";
+			reg = <0xe1618000 0x2000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>;
+			assigned-clock-rates = <125000000>, <200000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e161c000 {
+			compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem";
+			reg = <0xe161c000 0x2000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_PERIPHERAL 47>,<&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>;
+			assigned-clock-rates = <125000000>, <200000000>;
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 67>, <&pmc PMC_TYPE_GCK 67>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pwm: pwm@e1818000 {
+			compatible = "microchip,sama7d65-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1818000 0x500>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 72>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		flx0: flexcom@e1820000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1820000 0x200>;
+			ranges = <0x0 0xe1820000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e1824000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			ranges = <0x0 0xe1824000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			spi1: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx2: flexcom@e1828000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1828000 0x200>;
+			ranges = <0x0 0xe1828000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart2: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(9)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e182c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe182c000 0x200>;
+			ranges = <0x0 0xe182c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "usart";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			ranges = <0x0 0xe2018000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx5: flexcom@e201c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe201c000 0x200>;
+			ranges = <0x0 0xe201c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c5: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(15)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx6: flexcom@e2020000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2020000 0x200>;
+			ranges = <0x0 0xe2020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+			status = "disabled";
+
+			uart6: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@e2024000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			ranges = <0x0 0xe2024000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+		};
+
+		flx8: flexcom@e281c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			ranges = <0x0 0xe281c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e2820000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			ranges = <0x0 0xe281c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@e2824000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			ranges = <0x0 0xe2824000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7d65-ddr3phy", "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 17bcdcf0cf4a..03ef3d9aaeec 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -38,6 +38,16 @@
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+			next-level-cache = <&L2>;
+
+			L2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>; // L2, 256 KB
+				cache-unified;
+			};
 		};
 	};
 
@@ -117,19 +127,22 @@
 	};
 
 	clocks {
-		slow_xtal: slow_xtal {
+		slow_xtal: clock-slowxtal {
 			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
 			#clock-cells = <0>;
 		};
 
-		main_xtal: main_xtal {
+		main_xtal: clock-mainxtal {
 			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
 			#clock-cells = <0>;
 		};
 
-		usb_clk: usb_clk {
+		usb_clk: clock-usbclk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-output-names = "usb_clk";
 			clock-frequency = <48000000>;
 		};
 	};
@@ -811,7 +824,7 @@
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
-				atmel,fifo-size = <16>;
+				atmel,fifo-size = <32>;
 				status = "disabled";
 			};
 		};
@@ -837,7 +850,7 @@
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
-				atmel,fifo-size = <16>;
+				atmel,fifo-size = <32>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/microchip/tny_a9260.dts b/arch/arm/boot/dts/microchip/tny_a9260.dts
index ef6d586ce887..f0f2a787d669 100644
--- a/arch/arm/boot/dts/microchip/tny_a9260.dts
+++ b/arch/arm/boot/dts/microchip/tny_a9260.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board
+ * tny_a9260.dts - Device Tree file for Calao TNY A9260 board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
diff --git a/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
index 70e5635c78ed..4d4377f51bec 100644
--- a/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ * tny_a9260_common.dtsi - Device Tree file for Calao TNY A926x board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
diff --git a/arch/arm/boot/dts/microchip/tny_a9263.dts b/arch/arm/boot/dts/microchip/tny_a9263.dts
index 62b7d9f9a926..fd8244b56e05 100644
--- a/arch/arm/boot/dts/microchip/tny_a9263.dts
+++ b/arch/arm/boot/dts/microchip/tny_a9263.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ * usb_a9263.dts - Device Tree file for Calao USB A9293 board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
@@ -64,7 +64,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/microchip/tny_a9g20.dts b/arch/arm/boot/dts/microchip/tny_a9g20.dts
index 118d766a1265..cebd5696a2c1 100644
--- a/arch/arm/boot/dts/microchip/tny_a9g20.dts
+++ b/arch/arm/boot/dts/microchip/tny_a9g20.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board
+ * tny_a9g20.dts - Device Tree file for Calao TNY A9G20 board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
diff --git a/arch/arm/boot/dts/microchip/usb_a9260.dts b/arch/arm/boot/dts/microchip/usb_a9260.dts
index 66f8da89007d..3b61e7145060 100644
--- a/arch/arm/boot/dts/microchip/usb_a9260.dts
+++ b/arch/arm/boot/dts/microchip/usb_a9260.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * usb_a9260.dts - Device Tree file for Caloa USB A9260 board
+ * usb_a9260.dts - Device Tree file for Calao USB A9260 board
  *
  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
@@ -12,14 +12,6 @@
 	model = "Calao USB A9260";
 	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
 
-	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
 	ahb {
 		apb {
 			shdwc: poweroff@fffffd10 {
diff --git a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
index 8744b5f6f792..da32c5fdcc47 100644
--- a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
@@ -1,11 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ * usb_a926x.dts - Device Tree file for Calao USB A926x board
  *
  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 
 / {
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
@@ -16,6 +21,10 @@
 		};
 	};
 
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
 	ahb {
 		apb {
 			dbgu: serial@fffff200 {
@@ -111,7 +120,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -122,17 +131,14 @@
 
 		user_led {
 			label = "user_led";
-			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user-pb {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/microchip/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts
index 45745915b2e1..8e1a3fb61087 100644
--- a/arch/arm/boot/dts/microchip/usb_a9263.dts
+++ b/arch/arm/boot/dts/microchip/usb_a9263.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ * usb_a9263.dts - Device Tree file for Calao USB A9293 board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
@@ -9,7 +9,7 @@
 
 / {
 	model = "Calao USB A9263";
-	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+	compatible = "calao,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
 
 	chosen {
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
@@ -58,7 +58,7 @@
 			};
 
 			spi0: spi@fffa4000 {
-				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				cs-gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 				status = "okay";
 				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
@@ -84,7 +84,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
@@ -139,7 +139,7 @@
 			};
 		};
 
-		usb0: ohci@a00000 {
+		usb0: usb@a00000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -151,16 +151,13 @@
 		user_led {
 			label = "user_led";
 			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
 		};
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user-pb {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
index 08d58081201a..5b1d80c0ab26 100644
--- a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
+++ b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
@@ -65,28 +65,26 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb1 {
+		button-user-pb1 {
 			label = "user_pb1";
 			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
 		};
 
-		user_pb2 {
+		button-user-pb2 {
 			label = "user_pb2";
 			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
 			linux,code = <0x101>;
 		};
 
-		user_pb3 {
+		button-user-pb3 {
 			label = "user_pb3";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 		};
 
-		user_pb4 {
+		button-user-pb4 {
 			label = "user_pb4";
 			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20.dts b/arch/arm/boot/dts/microchip/usb_a9g20.dts
index 2f667b083e81..555291cd30b3 100644
--- a/arch/arm/boot/dts/microchip/usb_a9g20.dts
+++ b/arch/arm/boot/dts/microchip/usb_a9g20.dts
@@ -1,13 +1,28 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ * usb_a9g20.dts - Device Tree file for Calao USB A9G20 board
  *
  *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 /dts-v1/;
-#include "usb_a9g20_common.dtsi"
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
 
 / {
 	model = "Calao USB A9G20";
 	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
 };
+
+&spi0 {
+	cs-gpios = <&pioC 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	/* TODO: Some revisions might have a dataflash here instead of an EEPROM */
+	eeprom@0 {
+		compatible = "st,m95640", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+		size = <8192>;
+		pagesize = <32>;
+		address-width = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi
deleted file mode 100644
index 7d10b36db1ee..000000000000
--- a/arch/arm/boot/dts/microchip/usb_a9g20_common.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
- *
- *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-
-#include "at91sam9g20.dtsi"
-#include "usb_a9260_common.dtsi"
-
-/ {
-	chosen {
-		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@20000000 {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	i2c-gpio-0 {
-		rtc@56 {
-			compatible = "microcrystal,rv3029";
-			reg = <0x56>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
index f65712015d40..2eda00477bc5 100644
--- a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
+++ b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
@@ -1,11 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board
+ * usb_a9g20_lpw.dts - Device Tree file for Calao USB A9G20 Low Power board
  *
  *  Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 /dts-v1/;
-#include "usb_a9g20_common.dtsi"
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
 
 / {
 	model = "Calao USB A9G20 Low Power";
@@ -16,7 +17,7 @@
 			spi1: spi@fffcc000 {
 				cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
 				status = "okay";
-				mmc-slot@0 {
+				mmc@0 {
 					compatible = "mmc-spi-slot";
 					reg = <0>;
 					voltage-ranges = <3200 3400>;
@@ -27,4 +28,11 @@
 			};
 		};
 	};
+
+	i2c-gpio-0 {
+		rtc@56 {
+			compatible = "microcrystal,rv3029";
+			reg = <0x56>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
index 868454ae6bde..98c35771534e 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
@@ -99,6 +99,11 @@
 		};
 	};
 
+	udc0_phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
 	ahb {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -122,7 +127,14 @@
 			clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
 		};
 
-		gmac0: eth@f0802000 {
+		mc: memory-controller@f0824000 {
+			compatible = "nuvoton,npcm750-memory-controller";
+			reg = <0xf0824000 0x1000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gmac0: ethernet@f0802000 {
 			device_type = "network";
 			compatible = "snps,dwmac";
 			reg = <0xf0802000 0x2000>;
@@ -137,6 +149,29 @@
 			status = "disabled";
 		};
 
+		sdmmc: mmc@f0842000 {
+			compatible = "nuvoton,npcm750-sdhci";
+			status = "disabled";
+			reg = <0xf0842000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =  <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "clk_mmc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc8_pins
+					&mmc_pins>;
+		};
+
+		sdhci: mmc@f0840000 {
+			compatible = "nuvoton,npcm750-sdhci";
+			status = "disabled";
+			reg = <0xf0840000 0x200>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =  <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "clk_sdhc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd1_pins>;
+		};
+
 		ehci1: usb@f0806000 {
 			compatible = "nuvoton,npcm750-ehci";
 			reg = <0xf0806000 0x1000>;
@@ -144,6 +179,13 @@
 			status = "disabled";
 		};
 
+		ohci1: usb@f0807000 {
+			compatible = "generic-ohci";
+			reg = <0xf0807000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		fiu0: spi@fb000000 {
 			compatible = "nuvoton,npcm750-fiu";
 			#address-cells = <1>;
@@ -179,6 +221,72 @@
 			status = "disabled";
 		};
 
+		udc5: usb@f0835000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0835000 0x1000
+			       0xfffd2800 0x800>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc6: usb@f0836000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0836000 0x1000
+			       0xfffd3000 0x800>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc7: usb@f0837000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0837000 0x1000
+			       0xfffd3800 0x800>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc8: usb@f0838000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0838000 0x1000
+			       0xfffd4000 0x800>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc9: usb@f0839000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0839000 0x1000
+			       0xfffd4800 0x800>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			nuvoton,sysgcr = <&gcr>;
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
 		apb {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
index 9f64c85e1c20..231228842e63 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
@@ -661,7 +661,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	mb_fru@50 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
@@ -704,7 +704,7 @@
 				reg = <0x5d>;
 				status = "okay";
 			};
-			fan_fru@51 {
+			eeprom@51 {
 				compatible = "atmel,24c64";
 				reg = <0x51>;
 			};
@@ -714,7 +714,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			hsbp_fru@52 {
+			eeprom@52 {
 				compatible = "atmel,24c64";
 				reg = <0x52>;
 				status = "okay";
@@ -1050,19 +1050,19 @@
 		"","","","SIO_POWER_GOOD","","","","";
 	};
 	gpio2: gpio@f0012000 {
-		bmc_usb_mux_oe_n {
+		bmc-usb-mux-oe-n-hog {
 			gpio-hog;
 			gpios = <25 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "bmc-usb-mux-oe-n";
 		};
-		bmc_usb_mux_sel {
+		bmc-usb-mux-sel-hog {
 			gpio-hog;
 			gpios = <26 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "bmc-usb-mux-sel";
 		};
-		bmc_usb2517_reset_n {
+		bmc-usb2517-reset-n-hog {
 			gpio-hog;
 			gpios = <27 GPIO_ACTIVE_LOW>;
 			output-low;
@@ -1070,19 +1070,19 @@
 		};
 	};
 	gpio3: gpio@f0013000 {
-		assert_cpu0_reset {
+		assert-cpu0-reset-hog {
 			gpio-hog;
 			gpios = <14 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "assert-cpu0-reset";
 		};
-		assert_pwrok_cpu0_n {
+		assert-pwrok-cpu0-n-hog {
 			gpio-hog;
 			gpios = <15 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "assert-pwrok-cpu0-n";
 		};
-		assert_cpu0_prochot {
+		assert-cpu0-prochot-hog {
 			gpio-hog;
 			gpios = <16 GPIO_ACTIVE_HIGH>;
 			output-low;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
index 087f4ac43187..0c94e14d40e8 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
@@ -427,91 +427,91 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-		G1A_P0_0 {
+		g1a-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			output-high;
 			line-name = "TPM_BMC_ALERT_N";
 		};
-		G1A_P0_1 {
+		g1a-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "FM_BIOS_TOP_SWAP";
 		};
-		G1A_P0_2 {
+		g1a-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "FM_BIOS_PREFRB2_GOOD";
 		};
-		G1A_P0_3 {
+		g1a-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			input;
 			line-name = "BMC_SATAXPCIE_0TO3_SEL";
 		};
-		G1A_P0_4 {
+		g1a-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			input;
 			line-name = "BMC_SATAXPCIE_4TO7_SEL";
 		};
-		G1A_P0_5 {
+		g1a-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-low;
 			line-name = "FM_UV_ADR_TRIGGER_EN_N";
 		};
-		G1A_P0_6 {
+		g1a-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "RM_THROTTLE_EN_N";
 		};
-		G1A_P1_0 {
+		g1a-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_BMC_TPM_PRES_N";
 		};
-		G1A_P1_1 {
+		g1a-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_CPU0_SKTOCC_LVT3_N";
 		};
-		G1A_P1_2 {
+		g1a-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			input;
 			line-name = "FM_CPU1_SKTOCC_LVT3_N";
 		};
-		G1A_P1_3 {
+		g1a-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			input;
 			line-name = "PSU1_ALERT_N";
 		};
-		G1A_P1_4 {
+		g1a-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			input;
 			line-name = "PSU2_ALERT_N";
 		};
-		G1A_P1_5 {
+		g1a-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			input;
 			line-name = "H_CPU0_FAST_WAKE_LVT3_N";
 		};
-		G1A_P1_6 {
+		g1a-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
 			line-name = "I2C_MUX1_RESET_N";
 		};
-		G1A_P1_7 {
+		g1a-p1-7-hog {
 			gpio-hog;
 			gpios = <15 0>;
 			input;
@@ -524,91 +524,91 @@
 		reg = <0x75>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		G1B_P0_0 {
+		g1b-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			input;
 			line-name = "PVDDQ_ABC_PINALERT_N";
 		};
-		G1B_P0_1 {
+		g1b-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "PVDDQ_DEF_PINALERT_N";
 		};
-		G1B_P0_2 {
+		g1b-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "PVDDQ_GHJ_PINALERT_N";
 		};
-		G1B_P0_3 {
+		g1b-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			input;
 			line-name = "PVDDQ_KLM_PINALERT_N";
 		};
-		G1B_P0_5 {
+		g1b-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID0";
 		};
-		G1B_P0_6 {
+		g1b-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID1";
 		};
-		G1B_P0_7 {
+		g1b-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID2";
 		};
-		G1B_P1_0 {
+		g1b-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_OC_DETECT_EN_N";
 		};
-		G1B_P1_1 {
+		g1b-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_FLASH_DESC_OVERRIDE";
 		};
-		G1B_P1_2 {
+		g1b-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			output-low;
 			line-name = "FP_PWR_ID_LED_N";
 		};
-		G1B_P1_3 {
+		g1b-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			output-low;
 			line-name = "BMC_LED_PWR_GRN";
 		};
-		G1B_P1_4 {
+		g1b-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			output-low;
 			line-name = "BMC_LED_PWR_AMBER";
 		};
-		G1B_P1_5 {
+		g1b-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-high;
 			line-name = "FM_BMC_FAULT_LED_N";
 		};
-		G1B_P1_6 {
+		g1b-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
 			line-name = "FM_CPLD_BMC_PWRDN_N";
 		};
-		G1B_P1_7 {
+		g1b-p1-7-hog {
 			gpio-hog;
 			gpios = <15 0>;
 			output-high;
@@ -626,91 +626,91 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-		G2A_P0_0 {
+		g2a-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			output-high;
 			line-name = "BMC_PON_RST_REQ_N";
 		};
-		G2A_P0_1 {
+		g2a-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			output-high;
 			line-name = "BMC_RST_IND_REQ_N";
 		};
-		G2A_P0_2 {
+		g2a-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "RST_BMC_RTCRST";
 		};
-		G2A_P0_3 {
+		g2a-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			output-high;
 			line-name = "FM_BMC_PWRBTN_OUT_N";
 		};
-		G2A_P0_4 {
+		g2a-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			output-high;
 			line-name = "RST_BMC_SYSRST_BTN_OUT_N";
 		};
-		G2A_P0_5 {
+		g2a-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-high;
 			line-name = "FM_BATTERY_SENSE_EN_N";
 		};
-		G2A_P0_6 {
+		g2a-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			output-high;
 			line-name = "FM_BMC_READY_N";
 		};
-		G2A_P0_7 {
+		g2a-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			input;
 			line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 		};
-		G2A_P1_0 {
+		g2a-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_SLOT4_CFG0";
 		};
-		G2A_P1_1 {
+		g2a-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_SLOT4_CFG1";
 		};
-		G2A_P1_2 {
+		g2a-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			input;
 			line-name = "FM_NVDIMM_EVENT_N";
 		};
-		G2A_P1_3 {
+		g2a-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			input;
 			line-name = "PSU1_BLADE_EN_N";
 		};
-		G2A_P1_4 {
+		g2a-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			input;
 			line-name = "BMC_PCH_FNM";
 		};
-		G2A_P1_5 {
+		g2a-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			input;
 			line-name = "FM_SOL_UART_CH_SEL";
 		};
-		G2A_P1_6 {
+		g2a-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			input;
@@ -723,91 +723,91 @@
 		reg = <0x75>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		G2B_P0_0 {
+		g2b-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			input;
 			line-name = "FM_CPU_MSMI_LVT3_N";
 		};
-		G2B_P0_1 {
+		g2b-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "FM_BIOS_MRC_DEBUG_MSG_DIS";
 		};
-		G2B_P0_2 {
+		g2b-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "FM_CPU1_DISABLE_BMC_N";
 		};
-		G2B_P0_3 {
+		g2b-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			output-low;
 			line-name = "BMC_JTAG_SELECT";
 		};
-		G2B_P0_4 {
+		g2b-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			output-high;
 			line-name = "PECI_MUX_SELECT";
 		};
-		G2B_P0_5 {
+		g2b-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-high;
 			line-name = "I2C_MUX2_RESET_N";
 		};
-		G2B_P0_6 {
+		g2b-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "FM_BMC_CPLD_PSU2_ON";
 		};
-		G2B_P0_7 {
+		g2b-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			output-high;
 			line-name = "PSU2_ALERT_EN_N";
 		};
-		G2B_P1_0 {
+		g2b-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			output-high;
 			line-name = "FM_CPU_BMC_INIT";
 		};
-		G2B_P1_1 {
+		g2b-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			output-high;
 			line-name = "IRQ_BMC_PCH_SCI_LPC_N";
 		};
-		G2B_P1_2 {
+		g2b-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			output-low;
 			line-name = "PMB_ALERT_EN_N";
 		};
-		G2B_P1_3 {
+		g2b-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			output-high;
 			line-name = "FM_FAST_PROCHOT_EN_N";
 		};
-		G2B_P1_4 {
+		g2b-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			output-high;
 			line-name = "BMC_NVDIMM_PRSNT_N";
 		};
-		G2B_P1_5 {
+		g2b-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-low;
 			line-name = "FM_BACKUP_BIOS_SEL_H_BMC";
 		};
-		G2B_P1_6 {
+		g2b-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
@@ -824,7 +824,7 @@
 		reg = <0x4a>;
 		status = "okay";
 	};
-	m24128_fru@51 {
+	eeprom@51 {
 		compatible = "atmel,24c128";
 		reg = <0x51>;
 		pagesize = <64>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
index 30eed40b89b5..65fe3a180bb1 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
@@ -44,7 +44,7 @@
 	};
 
 	ahb {
-		gmac1: eth@f0804000 {
+		gmac1: ethernet@f0804000 {
 			device_type = "network";
 			compatible = "snps,dwmac";
 			reg = <0xf0804000 0x2000>;
@@ -58,5 +58,70 @@
 					&rg2mdio_pins>;
 			status = "disabled";
 		};
+
+		udc0: usb@f0830000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0830000 0x1000
+			       0xfffd0000 0x800>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc1: usb@f0831000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0831000 0x1000
+			       0xfffd0800 0x800>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc2: usb@f0832000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0832000 0x1000
+			       0xfffd1000 0x800>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc3: usb@f0833000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0833000 0x1000
+			       0xfffd1800 0x800>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc4: usb@f0834000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0834000 0x1000
+			       0xfffd2000 0x800>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/nvidia/Makefile b/arch/arm/boot/dts/nvidia/Makefile
index 96972559253c..faf591485ada 100644
--- a/arch/arm/boot/dts/nvidia/Makefile
+++ b/arch/arm/boot/dts/nvidia/Makefile
@@ -11,9 +11,11 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
 	tegra124-nyan-big.dtb \
 	tegra124-nyan-big-fhd.dtb \
 	tegra124-nyan-blaze.dtb \
-	tegra124-venice2.dtb
+	tegra124-venice2.dtb \
+	tegra124-xiaomi-mocha.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-acer-a500-picasso.dtb \
+	tegra20-asus-sl101.dtb \
 	tegra20-asus-tf101.dtb \
 	tegra20-harmony.dtb \
 	tegra20-colibri-eval-v3.dtb \
@@ -31,9 +33,12 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-asus-nexus7-grouper-PM269.dtb \
 	tegra30-asus-nexus7-grouper-E1565.dtb \
 	tegra30-asus-nexus7-tilapia-E1565.dtb \
+	tegra30-asus-p1801-t.dtb \
 	tegra30-asus-tf201.dtb \
 	tegra30-asus-tf300t.dtb \
 	tegra30-asus-tf300tg.dtb \
+	tegra30-asus-tf300tl.dtb \
+	tegra30-asus-tf600t.dtb \
 	tegra30-asus-tf700t.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi
index 86f14e2fd29f..a98667641be2 100644
--- a/arch/arm/boot/dts/nvidia/tegra114.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/memory/tegra114-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/nvidia,tegra114-car.h>
 #include <dt-bindings/soc/tegra-pmc.h>
 
 / {
@@ -47,6 +48,45 @@
 
 		ranges = <0x54000000 0x54000000 0x01000000>;
 
+		vi@54080000 {
+			compatible = "nvidia,tegra114-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+
+			iommus = <&mc TEGRA_SWGROUP_VI>;
+
+			status = "disabled";
+		};
+
+		epp@540c0000 {
+			compatible = "nvidia,tegra114-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_EPP>;
+			resets = <&tegra_car TEGRA114_CLK_EPP>;
+			reset-names = "epp";
+
+			iommus = <&mc TEGRA_SWGROUP_EPP>;
+
+			status = "disabled";
+		};
+
+		isp@54100000 {
+			compatible = "nvidia,tegra114-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_ISP>;
+			resets = <&tegra_car TEGRA114_CLK_ISP>;
+			reset-names = "isp";
+
+			iommus = <&mc TEGRA_SWGROUP_ISP>;
+
+			status = "disabled";
+		};
+
 		gr2d@54140000 {
 			compatible = "nvidia,tegra114-gr2d";
 			reg = <0x54140000 0x00040000>;
@@ -139,7 +179,7 @@
 			reg = <0x54400000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
 				 <&tegra_car TEGRA114_CLK_DSIBLP>,
-				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 82>;
 			reset-names = "dsi";
@@ -149,6 +189,31 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		msenc@544c0000 {
+			compatible = "nvidia,tegra114-msenc";
+			reg = <0x544c0000 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_MSENC>;
+			resets = <&tegra_car TEGRA114_CLK_MSENC>;
+			reset-names = "mpe";
+
+			iommus = <&mc TEGRA_SWGROUP_MSENC>;
+
+			status = "disabled";
+		};
+
+		tsec@54500000 {
+			compatible = "nvidia,tegra114-tsec";
+			reg = <0x54500000 0x00040000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_TSEC>;
+			resets = <&tegra_car TEGRA114_CLK_TSEC>;
+
+			iommus = <&mc TEGRA_SWGROUP_TSEC>;
+
+			status = "disabled";
+		};
 	};
 
 	gic: interrupt-controller@50041000 {
@@ -577,6 +642,21 @@
 		#iommu-cells = <1>;
 	};
 
+	hda@70030000 {
+		compatible = "nvidia,tegra114-hda", "nvidia,tegra30-hda";
+		reg = <0x70030000 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_HDA>,
+			 <&tegra_car TEGRA114_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA114_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
 	ahub@70080000 {
 		compatible = "nvidia,tegra114-ahub";
 		reg = <0x70080000 0x200>,
@@ -678,6 +758,29 @@
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
+	dfll: clock@70110000 {
+		compatible = "nvidia,tegra114-dfll";
+		reg = <0x70110000 0x100>, /* DFLL control */
+		      <0x70110000 0x100>, /* I2C output control */
+		      <0x70110100 0x100>, /* Integrated I2C controller */
+		      <0x70110200 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA114_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA114_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA114_RST_DFLL_DVCO>;
+		reset-names = "dvco";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,cf = <10>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		status = "disabled";
+	};
+
 	mmc@78000000 {
 		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000000 0x200>;
@@ -805,31 +908,49 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+
+			clocks = <&tegra_car TEGRA114_CLK_CCLK_G>,
+				 <&tegra_car TEGRA114_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA114_CLK_PLL_X>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <3>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts =
diff --git a/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts b/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
index 0f3debeb294b..1aa7265554d9 100644
--- a/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
@@ -84,11 +84,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
diff --git a/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
index d13b8d25ca6a..23158bb82173 100644
--- a/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
@@ -85,11 +85,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
index 8125c1b3e8d7..974c76f007db 100644
--- a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
@@ -716,6 +716,7 @@
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		gpio-open-drain;
@@ -727,6 +728,7 @@
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		gpio-open-drain;
diff --git a/arch/arm/boot/dts/nvidia/tegra124-xiaomi-mocha.dts b/arch/arm/boot/dts/nvidia/tegra124-xiaomi-mocha.dts
new file mode 100644
index 000000000000..18c9cdf45eca
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-xiaomi-mocha.dts
@@ -0,0 +1,2790 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/ti-drv260x.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra124.dtsi"
+
+/ {
+	model = "Xiaomi Mi Pad A0101";
+	compatible = "xiaomi,mocha", "nvidia,tegra124";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* uSD slot */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &palmas;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0 0x80000000 0 0x80000000>;
+	};
+
+	host1x@50000000 {
+		dsia: dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+			nvidia,ganged-mode = <&dsib>;
+
+			panel@0 {
+				compatible = "sharp,lq079l1sx01";
+				reg = <0>;
+
+				reset-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+
+				avdd-supply = <&avdd_lcd>;
+				vddio-supply = <&vdd_lcd_io>;
+
+				vsp-supply = <&vsp_5v5_lcd>;
+				vsn-supply = <&vsn_5v5_lcd>;
+
+				backlight = <&lp8556>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						panel_link0: endpoint {
+							remote-endpoint = <&dsia_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						panel_link1: endpoint {
+							remote-endpoint = <&dsib_out>;
+						};
+					};
+				};
+			};
+
+			port {
+				dsia_out: endpoint {
+					remote-endpoint = <&panel_link0>;
+				};
+			};
+		};
+
+		dsib: dsi@54400000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+
+			port {
+				dsib_out: endpoint {
+					remote-endpoint = <&panel_link1>;
+				};
+			};
+		};
+	};
+
+	gpu@57000000 {
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	clock@60006000 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+				nvidia,parent-clock-frequency = <924000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Keys pinmux */
+			keys {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col6_pq6",
+					      "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hall-front {
+				nvidia,pins = "pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hall-back {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Leds pinmux */
+			bl-en {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			keys-led {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			rgb-led-en {
+				nvidia,pins = "pg7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Panel pinmux */
+			lcd-rst {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd-vsp-en {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd-vsn-en {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd-id {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "displaya_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd-pwm {
+				nvidia,pins = "ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SDMMC1 pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3-cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3-cd {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			usd-pwr {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4-cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B pinmux */
+			uartb-cts {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartb-rts {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartb-rxd {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartb-txd {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-C pinmux */
+			uartc-cts-rxd {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartc-rts-txd {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D pinmux */
+			uartd-txd {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartd-rxd {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_sda_pc5",
+					      "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			ts-irq {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ts-rst {
+				nvidia,pins = "pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ts-en {
+				nvidia,pins = "pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hapt-en {
+				nvidia,pins = "pg6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			charger-irq {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bat-irq {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			compass-rst {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			als-irq {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			therm-irq {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			wlan-reg-on {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			wlan-host-wake {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bt-reg-on {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bt-dev-wake {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			imu-irq {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			imu-sync {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cdc-mclk1 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cdc-din {
+				nvidia,pins = "dap1_din_pn1",
+					      "dap1_fs_pn0",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cdc-dout {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spkr-rl-rst {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spkr-rl-irq {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dvfs-pwm {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dvfs-clk {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-mclk2 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vimclk2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vbrtr-pwm {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			soc-pins {
+				nvidia,pins = "pj2", "kb_row15_ps7",
+					      "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk-32k-in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			core-pwr-req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cpu-pwr-req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwr-int-n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			reset-out-n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd-id-det0 {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cdc-rst {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cdc-det-irq {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hph-pa-sd {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hph-en {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-rear-rst-n {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-af-pwdn {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-front-pwdn {
+				nvidia,pins = "pbb6";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-front-rst-n {
+				nvidia,pins = "pcc1";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gps-en {
+				nvidia,pins = "ph5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			boot-select {
+				nvidia,pins = "pg0", "pg1", "pg2", "pg3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ram-select {
+				nvidia,pins = "pg4", "pg5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			line-in-det {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gpadc-sync {
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gpu-pwr-req {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ear-uart-sw {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dsi-b {
+				nvidia,pins = "mipi_pad_ctrl_dsi_b";
+				nvidia,function = "dsi_b";
+			};
+
+			/* GPIO power/drive control */
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <32>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <20>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <1>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		bluetooth {
+			compatible = "brcm,bcm43540-bt";
+			max-speed = <4000000>;
+
+			clocks = <&clk32k_pmic>;
+			clock-names = "lpo";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+
+		/* Console */
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	gen1_i2c: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		lp8556: backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+
+			dev-ctrl = /bits/ 8 <0x83>;
+			init-brt = /bits/ 8 <0x1f>;
+
+			power-supply = <&vdd_3v3_sys>;
+			enable-supply = <&vddio_1v8_bl>;
+
+			rom-98h {
+				rom-addr = /bits/ 8 <0x98>;
+				rom-val = /bits/ 8 <0x80>;
+			};
+
+			rom-9eh {
+				rom-addr = /bits/ 8 <0x9e>;
+				rom-val = /bits/ 8 <0x21>;
+			};
+
+			rom-a0h {
+				rom-addr = /bits/ 8 <0xa0>;
+				rom-val = /bits/ 8 <0xff>;
+			};
+
+			rom-a1h {
+				rom-addr = /bits/ 8 <0xa1>;
+				rom-val = /bits/ 8 <0x3f>;
+			};
+
+			rom-a2h {
+				rom-addr = /bits/ 8 <0xa2>;
+				rom-val = /bits/ 8 <0x20>;
+			};
+
+			rom-a3h {
+				rom-addr = /bits/ 8 <0xa3>;
+				rom-val = /bits/ 8 <0x00>;
+			};
+
+			rom-a4h {
+				rom-addr = /bits/ 8 <0xa4>;
+				rom-val = /bits/ 8 <0x72>;
+			};
+
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x24>;
+			};
+
+			rom-a6h {
+				rom-addr = /bits/ 8 <0xa6>;
+				rom-val = /bits/ 8 <0x80>;
+			};
+
+			rom-a7h {
+				rom-addr = /bits/ 8 <0xa7>;
+				rom-val = /bits/ 8 <0xf5>;
+			};
+
+			rom-a8h {
+				rom-addr = /bits/ 8 <0xa8>;
+				rom-val = /bits/ 8 <0x24>;
+			};
+
+			rom-a9h {
+				rom-addr = /bits/ 8 <0xa9>;
+				rom-val = /bits/ 8 <0xb2>;
+			};
+
+			rom-aah {
+				rom-addr = /bits/ 8 <0xaa>;
+				rom-val = /bits/ 8 <0x8f>;
+			};
+
+			rom-aeh {
+				rom-addr = /bits/ 8 <0xae>;
+				rom-val = /bits/ 8 <0x0f>;
+			};
+		};
+
+		led-controller@32 {
+			compatible = "national,lp5521";
+			reg = <0x32>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+			clock-mode = /bits/ 8 <2>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+
+				led-cur = /bits/ 8 <0x14>;
+				max-cur = /bits/ 8 <0xff>;
+
+				color = <LED_COLOR_ID_RED>;
+				function = LED_FUNCTION_STATUS;
+			};
+
+			led@1 {
+				reg = <1>;
+
+				led-cur = /bits/ 8 <0x14>;
+				max-cur = /bits/ 8 <0xff>;
+
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_STATUS;
+			};
+
+			led@2 {
+				reg = <2>;
+
+				led-cur = /bits/ 8 <0x14>;
+				max-cur = /bits/ 8 <0xff>;
+
+				color = <LED_COLOR_ID_BLUE>;
+				function = LED_FUNCTION_STATUS;
+			};
+		};
+
+		audio-codec@34 {
+			compatible = "nxp,tfa9890";
+			reg = <0x34>;
+
+			sound-name-prefix = "Speaker Right";
+			vddd-supply = <&vdd_1v8_vio>;
+
+			#sound-dai-cells = <0>;
+		};
+
+		audio-codec@37 {
+			compatible = "nxp,tfa9890";
+			reg = <0x37>;
+
+			sound-name-prefix = "Speaker Left";
+			vddd-supply = <&vdd_1v8_vio>;
+
+			#sound-dai-cells = <0>;
+		};
+
+		light-sensor@44 {
+			compatible = "isil,isl29035";
+			reg = <0x44>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_LOW>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+		};
+
+		temp_sensor: temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_1v8_vio>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		haptic-engine@5a {
+			compatible = "ti,drv2604";
+			reg = <0x5a>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(G, 6) GPIO_ACTIVE_HIGH>;
+
+			mode = <DRV260X_ERM_MODE>;
+			library-sel = <DRV260X_ERM_LIB_A>;
+
+			vib-rated-mv = <3200>;
+			vib-overdrive-mv = <3400>;
+
+			vbat-supply = <&vdd_3v3_sys>;
+		};
+	};
+
+	gen2_i2c: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		power-sensor@40 {
+			compatible = "ti,ina230";
+			reg = <0x40>;
+
+			vs-supply = <&vdd_hv_sdmmc>;
+			#io-channel-cells = <1>;
+		};
+
+		fuel-gauge@55 {
+			compatible = "ti,bq27520g4";
+			reg = <0x55>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			monitored-battery = <&battery>;
+			power-supplies = <&bq24192>;
+		};
+
+		bq24192: charger@6b {
+			compatible = "ti,bq24192";
+			reg = <0x6b>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_EDGE_FALLING>;
+
+			ce-gpios = <&palmas_gpio 7 GPIO_ACTIVE_LOW>;
+
+			monitored-battery = <&battery>;
+
+			omit-battery-class;
+			ti,system-minimum-microvolt = <3500000>;
+
+			usb_otg_vbus: usb-otg-vbus {
+				regulator-name = "usb_otg_vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+			};
+		};
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Atmel mxT1664T/mxT1066T touchscreen */
+		touchscreen@4a {
+			compatible = "atmel,maxtouch";
+			reg = <0x4a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(R, 7) IRQ_TYPE_EDGE_FALLING>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(K, 4) GPIO_ACTIVE_LOW>;
+
+			linux,keycodes = <KEY_BACK KEY_HOME KEY_MENU>;
+
+			vdda-supply = <&avdd_3v3_ts>;
+			vdd-supply  = <&vdd_2v8_tp>;
+		};
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Texas Instruments TPS65913 PMIC */
+		palmas: pmic@58 {
+			compatible = "ti,tps65913", "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			adc {
+				compatible = "ti,palmas-gpadc";
+				interrupts = <18 IRQ_TYPE_NONE>,
+					     <16 IRQ_TYPE_NONE>,
+					     <17 IRQ_TYPE_NONE>;
+
+				ti,channel0-current-microamp = <20>;
+				#io-channel-cells = <1>;
+			};
+
+			palmas_extcon: extcon {
+				compatible = "ti,palmas-usb-vid";
+
+				ti,enable-vbus-detection;
+				ti,enable-id-detection;
+
+				ti,wakeup;
+			};
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			clk32k_pmic: palmas-clk32k@0 {
+				compatible = "ti,palmas-clk32kg";
+				#clock-cells = <0>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio0 {
+						pins = "gpio0";
+						function = "id";
+						bias-pull-up;
+					};
+
+					pin_gpio1 {
+						pins = "gpio1";
+						function = "gpio";
+					};
+
+					pin_gpio2 {
+						pins = "gpio2";
+						function = "gpio";
+					};
+
+					/* GPIO3 is not used */
+
+					pin_gpio4 {
+						pins = "gpio4";
+						function = "gpio";
+					};
+
+					pin_gpio5 {
+						pins = "gpio5";
+						function = "clk32kgaudio";
+					};
+
+					/* GPIO6 is not used */
+
+					pin_gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+					};
+
+					pin_powergood {
+						pins = "powergood";
+						function = "powergood";
+					};
+
+					pin_vac {
+						pins = "vac";
+						function = "vac";
+					};
+				};
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldo1-in-supply = <&vdd_1v8_vio>;
+				ldo2-in-supply = <&vdd_3v3_sys>;
+				ldo3-in-supply = <&vdd_smps10_out2>;
+				ldo4-in-supply = <&vdd_3v3_sys>;
+				ldo5-in-supply = <&vdd_1v8_vio>;
+				ldo6-in-supply = <&vdd_3v3_sys>;
+				ldo7-in-supply = <&vdd_3v3_sys>;
+				ldo8-in-supply = <&vdd_3v3_sys>;
+				ldo9-in-supply = <&vdd_hv_sdmmc>;
+				ldousb-in-supply = <&vdd_smps10_out2>;
+				ldoln-in-supply = <&vdd_smps10_out2>;
+
+				regulators {
+					vdd_cpu: smps123 {
+						regulator-name = "vdd_cpu";
+						regulator-min-microvolt = <700000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <1>;
+						ti,mode-sleep = <3>;
+					};
+
+					vdd_gpu: smps45 {
+						regulator-name = "vdd_gpu";
+						regulator-min-microvolt = <700000>;
+						regulator-max-microvolt = <1400000>;
+					};
+
+					vddio_ddr: smps6 {
+						regulator-name = "vddio_ddr";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_core: smps7 {
+						regulator-name = "vdd_core";
+						regulator-min-microvolt = <700000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					vdd_1v8_vio: smps8 {
+						regulator-name = "vdd_1v8_gen";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_hv_sdmmc: smps9 {
+						regulator-name = "vdd_hv_sdmmc";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vd_smps10_out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out2: smps10_out2 {
+						regulator-name = "vd_smps10_out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					avdd_pll: ldo1 {
+						regulator-name = "avdd_pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					avdd_lcd: ldo2 {
+						regulator-name = "avdd_lcd";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+					};
+
+					avdd_3v3_ts: ldo3 {
+						regulator-name = "avdd_3v3_ts";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-boot-on;
+					};
+
+					avdd_2v7_cam: ldo4 {
+						regulator-name = "avdd_2v7_cam";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					avdd_dsi_csi: ldo5 {
+						regulator-name = "avdd_dsi_csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-boot-on;
+					};
+
+					ldo6 {
+						regulator-name = "vdd_1v8_fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					avdd_2v7_vcm: ldo7 {
+						regulator-name = "avdd_2v7_vcm";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd_rtc";
+						regulator-min-microvolt = <950000>;
+						regulator-max-microvolt = <950000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_usd: ldo9 {
+						regulator-name = "vddio_sdmmc";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					avdd_usb: ldousb {
+						regulator-name = "vdd_usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "vddio_hv";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 IRQ_TYPE_NONE>;
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <2000>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Clear DEV_ON bit in DEV_CTRL register of TPS65913 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x58>;
+			nvidia,reg-addr = <0xa0>;
+			nvidia,reg-data = <0x00>;
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-0 {
+			/* Hynix H9CKNNNBKTMTDR DDR3 924MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = < 0x40040001 0x8000000a
+					0x00000001 0x00000002 0x00000004 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x05040102 0x000b0604 0x77230305 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = < 0x40020001 0x80000012
+					0x00000001 0x00000002 0x00000004 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x05040102 0x000b0604 0x75a30305 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = < 0xa0000001 0x80000017
+					0x00000001 0x00000002 0x00000004 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x05040102 0x000b0604 0x74030305 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0x8000001e
+					0x00000001 0x00000002 0x00000003 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x05040102 0x000a0503 0x73830404 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x08000001 0x80000026
+					0x00000001 0x00000002 0x00000004 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x05040102 0x000a0504 0x73430505 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x01000003 0x80000040
+					0x00000001 0x00000002 0x00000007 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000007
+					0x00000003 0x00000001 0x00000005 0x00000005
+					0x05050103 0x000b0607 0x72e40a08 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = < 0x08000004 0x80000040
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000007 0x00000001 0x00000002 0x00000007
+					0x00000003 0x00000001 0x00000005 0x00000005
+					0x05050103 0x000c0709 0x72c50e0a 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = < 0x0f000005 0x80000040
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000007
+					0x00000003 0x00000001 0x00000005 0x00000005
+					0x05050103 0x000e090c 0x72c6120d 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = < 0x0f000007 0x80000040
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000009
+					0x00000003 0x00000001 0x00000006 0x00000006
+					0x06060103 0x00120b10 0x72c81811 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = < 0x00000009 0x80000040
+					0x00000004 0x00000005 0x00000012 0x0000000b
+					0x0000000e 0x00000002 0x00000003 0x0000000a
+					0x00000003 0x00000001 0x00000006 0x00000007
+					0x07060103 0x00140d12 0x72c91b13 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = < 0x0e00000b 0x80000040
+					0x00000006 0x00000007 0x00000018 0x0000000f
+					0x00000013 0x00000003 0x00000003 0x0000000c
+					0x00000003 0x00000001 0x00000008 0x00000008
+					0x08080103 0x001a1118 0x72ac2419 0x70000f02
+					0x001f0000 >;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = < 0x0e00000d 0x80000040
+					0x00000007 0x00000008 0x0000001b 0x00000012
+					0x00000017 0x00000004 0x00000004 0x0000000e
+					0x00000004 0x00000001 0x00000009 0x00000009
+					0x09090104 0x001e141b 0x72ae2a1c 0x70000f02
+					0x001f0000 >;
+			};
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		emc-timings-0 {
+			/* Hynix H9CKNNNBKTMTDR DDR3 924MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008c7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x000d0011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000015>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000000 0x00000002 0x00000000 0x00000002
+					0x00000005 0x00000006 0x00000008 0x00000003
+					0x0000000a 0x00000002 0x00000002 0x00000001
+					0x00000002 0x00000000 0x00000003 0x00000003
+					0x00000006 0x00000002 0x00000000 0x00000005
+					0x00000005 0x00010000 0x00000003 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x0000000c 0x0000000d 0x0000000f 0x00000030
+					0x00000000 0x0000000c 0x00000002 0x00000002
+					0x00000005 0x00000000 0x00000001 0x0000000c
+					0x00000003 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000006 0x00000006 0x00000003
+					0x00000003 0x00000056 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x000fc000 0x000fc000 0x00000000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x00000011 0x000d0011 0x00000000 0x00000003
+					0x0000f3f3 0x80000164 0x0000000a >;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008c7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x00150011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000015>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000001 0x00000004 0x00000000 0x00000002
+					0x00000005 0x00000006 0x00000008 0x00000003
+					0x0000000a 0x00000002 0x00000002 0x00000001
+					0x00000002 0x00000000 0x00000003 0x00000003
+					0x00000006 0x00000002 0x00000000 0x00000005
+					0x00000005 0x00010000 0x00000003 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x0000000c 0x0000000d 0x0000000f 0x0000004d
+					0x00000000 0x00000013 0x00000002 0x00000002
+					0x00000005 0x00000000 0x00000001 0x0000000c
+					0x00000005 0x00000005 0x00000003 0x00000003
+					0x00000003 0x00000006 0x00000006 0x00000003
+					0x00000003 0x0000008a 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x000fc000 0x000fc000 0x00000000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x00000011 0x00150011 0x00000000 0x00000003
+					0x0000f3f3 0x8000019f 0x0000000a >;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008c7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x00290011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000015>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000002 0x00000008 0x00000000 0x00000002
+					0x00000005 0x00000006 0x00000008 0x00000003
+					0x0000000a 0x00000002 0x00000002 0x00000001
+					0x00000002 0x00000000 0x00000003 0x00000003
+					0x00000006 0x00000002 0x00000000 0x00000005
+					0x00000005 0x00010000 0x00000003 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x0000000c 0x0000000d 0x0000000f 0x0000009a
+					0x00000000 0x00000026 0x00000002 0x00000002
+					0x00000005 0x00000000 0x00000001 0x0000000c
+					0x00000009 0x00000009 0x00000003 0x00000003
+					0x00000003 0x00000006 0x00000007 0x00000003
+					0x00000003 0x00000113 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x000fc000 0x000fc000 0x00000000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x00000011 0x00290011 0x00000000 0x00000003
+					0x0000f3f3 0x8000023a 0x0000000a >;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008c7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x00440011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000015>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000004 0x00000010 0x00000000 0x00000002
+					0x00000004 0x00000006 0x00000008 0x00000003
+					0x0000000a 0x00000002 0x00000002 0x00000001
+					0x00000002 0x00000000 0x00000003 0x00000003
+					0x00000006 0x00000002 0x00000000 0x00000005
+					0x00000005 0x00010000 0x00000003 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x0000000c 0x0000000d 0x0000000f 0x00000101
+					0x00000000 0x00000040 0x00000002 0x00000002
+					0x00000004 0x00000000 0x00000001 0x0000000c
+					0x0000000f 0x0000000f 0x00000003 0x00000003
+					0x00000003 0x00000006 0x00000005 0x00000003
+					0x00000003 0x000001c9 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x000fc000 0x000fc000 0x00000000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x00000019 0x00440011 0x00000000 0x00000003
+					0x0000f3f3 0x80000309 0x0000000a >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008c7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x00660011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000015>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000006 0x00000015 0x00000000 0x00000004
+					0x00000004 0x00000006 0x00000008 0x00000003
+					0x0000000a 0x00000002 0x00000002 0x00000001
+					0x00000002 0x00000000 0x00000003 0x00000003
+					0x00000006 0x00000002 0x00000000 0x00000005
+					0x00000005 0x00010000 0x00000003 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x0000000c 0x0000000d 0x0000000f 0x00000182
+					0x00000000 0x00000060 0x00000002 0x00000002
+					0x00000004 0x00000000 0x00000001 0x0000000c
+					0x00000017 0x00000017 0x00000003 0x00000003
+					0x00000003 0x00000006 0x00000005 0x00000003
+					0x00000003 0x000002ae 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x000fc000 0x000fc000 0x00000000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x00000025 0x00660011 0x00000000 0x00000003
+					0x0000f3f3 0x8000040b 0x0000000a >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008cf>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x00cc0011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000017>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x0000000c 0x0000002a 0x00000000 0x00000008
+					0x00000005 0x00000007 0x00000008 0x00000003
+					0x0000000a 0x00000003 0x00000003 0x00000002
+					0x00000003 0x00000000 0x00000002 0x00000002
+					0x00000005 0x00000003 0x00000000 0x00000003
+					0x00000007 0x00010000 0x00000004 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000002
+					0x0000000e 0x0000000f 0x00000011 0x00000304
+					0x00000000 0x000000c1 0x00000002 0x00000002
+					0x00000005 0x00000000 0x00000001 0x0000000c
+					0x0000002d 0x0000002d 0x00000003 0x00000004
+					0x00000003 0x00000009 0x00000006 0x00000003
+					0x00000003 0x0000055b 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00098000 0x00098000 0x00000000 0x00098000
+					0x00098000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x0008c000 0x00088000
+					0x00088000 0x00088000 0x00008800 0x00008800
+					0x00008800 0x00008800 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x0000004a 0x00cc0011 0x00000000 0x00000004
+					0x0000d3b3 0x80000713 0x0000000a >;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x000008d7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x012c0011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231239>;
+				nvidia,emc-zcal-cnt-long = <0x0000001f>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000011 0x0000003e 0x00000000 0x0000000c
+					0x00000005 0x00000007 0x00000008 0x00000003
+					0x0000000a 0x00000005 0x00000005 0x00000002
+					0x00000003 0x00000000 0x00000002 0x00000002
+					0x00000006 0x00000003 0x00000000 0x00000003
+					0x00000008 0x00030000 0x00000004 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000002
+					0x0000000f 0x00000012 0x00000014 0x0000046e
+					0x00000000 0x0000011b 0x00000002 0x00000002
+					0x00000005 0x00000000 0x00000001 0x0000000c
+					0x00000042 0x00000042 0x00000003 0x00000005
+					0x00000003 0x0000000d 0x00000007 0x00000003
+					0x00000003 0x000007e0 0x00000000 0x00000000
+					0x00000000 0x1363a096 0x005800a0 0x00008000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00060000 0x00060000 0x00000000 0x00060000
+					0x00060000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00048000 0x00048000
+					0x00048000 0x00048000 0x00004800 0x00004800
+					0x00004800 0x00004800 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451420 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x0000006c 0x012c0011 0x00000000 0x00000004
+					0x000052a3 0x800009ed 0x0000000b >;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x00000897>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x018c0011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004001c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231239>;
+				nvidia,emc-zcal-cnt-long = <0x00000028>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000017 0x00000053 0x00000000 0x00000010
+					0x00000007 0x00000008 0x00000008 0x00000003
+					0x0000000a 0x00000007 0x00000007 0x00000003
+					0x00000003 0x00000000 0x00000002 0x00000002
+					0x00000006 0x00000003 0x00000000 0x00000002
+					0x00000009 0x00030000 0x00000004 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000001
+					0x00000010 0x00000012 0x00000014 0x000005d9
+					0x00000000 0x00000176 0x00000002 0x00000002
+					0x00000007 0x00000000 0x00000001 0x0000000e
+					0x00000058 0x00000058 0x00000003 0x00000006
+					0x00000003 0x00000012 0x00000009 0x00000003
+					0x00000003 0x00000a66 0x00000000 0x00000000
+					0x00000000 0x1363a096 0x005800a0 0x00008000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00048000 0x00048000 0x00000000 0x00048000
+					0x00048000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00038000 0x00038000
+					0x00038000 0x00038000 0x00003800 0x00003800
+					0x00003800 0x00003800 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451420 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x0000008f 0x018c0011 0x00000000 0x00000004
+					0x000052a3 0x80000cc7 0x0000000b >;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x0000089f>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x800100c3>;
+				nvidia,emc-mode-2 = <0x80020006>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x02100013>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004001c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123123d>;
+				nvidia,emc-zcal-cnt-long = <0x00000034>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x0000001f 0x0000006e 0x00000000 0x00000016
+					0x00000009 0x00000009 0x00000009 0x00000003
+					0x0000000d 0x00000009 0x00000009 0x00000005
+					0x00000004 0x00000000 0x00000002 0x00000002
+					0x00000008 0x00000003 0x00000000 0x00000003
+					0x0000000a 0x00050000 0x00000004 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000002
+					0x00000011 0x00000015 0x00000017 0x000007cd
+					0x00000000 0x000001f3 0x00000003 0x00000003
+					0x00000009 0x00000000 0x00000001 0x00000011
+					0x00000075 0x00000075 0x00000004 0x00000008
+					0x00000004 0x00000019 0x0000000c 0x00000003
+					0x00000003 0x00000ddd 0x00000000 0x00000000
+					0x00000000 0x1363a096 0xe01200b9 0x00008000
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00004010 0x00004010 0x00000000 0x00004010
+					0x00004010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x0000000c 0x0000000c
+					0x0000000c 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x0000000c 0x00000220 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc004
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451420 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x000000bf 0x02100013 0x00000000 0x00000004
+					0x000042a0 0x800010b3 0x0000000d >;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x0000089f>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x800100e3>;
+				nvidia,emc-mode-2 = <0x80020007>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x02580014>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004001c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121103d>;
+				nvidia,emc-zcal-cnt-long = <0x0000003a>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000023 0x0000007d 0x00000000 0x00000019
+					0x0000000a 0x0000000a 0x0000000b 0x00000004
+					0x0000000f 0x0000000a 0x0000000a 0x00000005
+					0x00000004 0x00000000 0x00000004 0x00000004
+					0x0000000a 0x00000004 0x00000000 0x00000003
+					0x0000000d 0x00070000 0x00000005 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000002
+					0x00000014 0x00000018 0x0000001a 0x000008e4
+					0x00000000 0x00000239 0x00000004 0x00000004
+					0x0000000a 0x00000000 0x00000001 0x00000013
+					0x00000084 0x00000084 0x00000005 0x00000009
+					0x00000005 0x0000001c 0x0000000d 0x00000003
+					0x00000003 0x00000fc0 0x00000000 0x00000000
+					0x00000000 0x1363a096 0xe00e00b9 0x00008000
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000010 0x00000010 0x00000000 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000001
+					0x00000000 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000000 0x00000000 0x00000001
+					0x00000000 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000000 0x0000000c 0x0000000b
+					0x0000000b 0x0000000b 0x0000000b 0x0000000b
+					0x0000000b 0x0000000b 0x00000220 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc004
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451420 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x000000d8 0x02580014 0x00000000 0x00000005
+					0x000040a0 0x800012d6 0x00000010 >;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x0000089f>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010043>;
+				nvidia,emc-mode-2 = <0x8002001a>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x03180017>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004001c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120103d>;
+				nvidia,emc-zcal-cnt-long = <0x0000004c>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x0000002f 0x000000a6 0x00000000 0x00000021
+					0x0000000e 0x0000000d 0x0000000d 0x00000005
+					0x00000013 0x0000000e 0x0000000e 0x00000007
+					0x00000004 0x00000000 0x00000005 0x00000005
+					0x0000000e 0x00000004 0x00000000 0x00000005
+					0x0000000f 0x000b0000 0x00000006 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x00000016 0x0000001d 0x0000001f 0x00000bd1
+					0x00000000 0x000002f4 0x00000005 0x00000005
+					0x0000000e 0x00000000 0x00000001 0x00000017
+					0x000000af 0x000000af 0x00000006 0x0000000c
+					0x00000006 0x00000026 0x00000011 0x00000003
+					0x00000003 0x000014cb 0x00000000 0x00000000
+					0x00000000 0x1363a096 0xe00700b9 0x00008000
+					0x00000006 0x00000006 0x00000006 0x00000006
+					0x00000006 0x00000006 0x00000006 0x00000006
+					0x00000006 0x00000006 0x00000006 0x00000006
+					0x00000006 0x00000006 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00008012 0x00008012 0x00000000 0x00008012
+					0x00008012 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000002 0x00000005
+					0x00000002 0x00000004 0x00000005 0x00000004
+					0x00000004 0x00000003 0x00000002 0x00000005
+					0x00000002 0x00000004 0x00000005 0x00000004
+					0x00000004 0x00000003 0x0000000b 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x00000220 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc004
+					0x00000808 0x81f1f008 0x07070000 0x00000000
+					0x015ddddd 0x61861820 0x00514514 0x00514514
+					0x61861800 0x0000003f 0x00000000 0x00000000
+					0x0000011e 0x03180017 0x00000000 0x00000006
+					0x00004080 0x8000188b 0x00000014 >;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x0000089f>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x8002001c>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x039c0019>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004001c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120103d>;
+				nvidia,emc-zcal-cnt-long = <0x00000058>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000037 0x000000c2 0x00000000 0x00000026
+					0x00000010 0x0000000f 0x00000010 0x00000006
+					0x00000017 0x00000010 0x00000010 0x00000009
+					0x00000005 0x00000000 0x00000007 0x00000007
+					0x00000010 0x00000005 0x00000000 0x00000005
+					0x00000012 0x000d0000 0x00000007 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x00000019 0x00000020 0x00000022 0x00000dd4
+					0x00000000 0x00000375 0x00000006 0x00000006
+					0x00000010 0x00000000 0x00000001 0x0000001b
+					0x000000cc 0x000000cc 0x00000007 0x0000000e
+					0x00000007 0x0000002d 0x00000014 0x00000003
+					0x00000003 0x00001842 0x00000000 0x00000000
+					0x00000000 0x1363a896 0xe00400b9 0x00008000
+					0x00000004 0x00000004 0x00000004 0x00000004
+					0x00000004 0x00000004 0x00000004 0x00000004
+					0x00000004 0x00000004 0x00000004 0x00000004
+					0x00000004 0x00000004 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x0000000f 0x0000000f 0x00000000 0x00000011
+					0x00000012 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000004 0x00000006
+					0x00000004 0x00000006 0x00000006 0x00000006
+					0x00000006 0x00000005 0x00000004 0x00000006
+					0x00000004 0x00000006 0x00000006 0x00000006
+					0x00000006 0x00000005 0x0000000a 0x00000009
+					0x00000009 0x0000000a 0x00000009 0x00000009
+					0x00000009 0x00000009 0x00000220 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc004
+					0x00000404 0x81f1f008 0x07070000 0x00000000
+					0x015ddddd 0x51451420 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x0000014d 0x039c0019 0x00000000 0x00000007
+					0x00004080 0x80001c77 0x00000017 >;
+			};
+		};
+	};
+
+	padctl@7009f000 {
+		status = "disabled";
+	};
+
+	/* WiFi */
+	sdmmc1: mmc@700b0000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_P>;
+		assigned-clock-rates = <204000000>;
+
+		max-frequency = <82000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		sd-uhs-sdr104;
+		mmc-ddr-1_8v;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* BCM4354XKUBG */
+		wifi@1 {
+			compatible = "brcm,bcm4354-fmac", "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			clocks = <&clk32k_pmic>;
+			clock-names = "lpo";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	/* MicroSD */
+	sdmmc3: mmc@700b0400 {
+		status = "okay";
+		bus-width = <4>;
+
+		sd-uhs-sdr104;
+		mmc-ddr-1_8v;
+
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+
+		vmmc-supply = <&vdd_hv_sdmmc>;
+		vqmmc-supply = <&vddio_usd>;
+	};
+
+	/* eMMC */
+	sdmmc4: mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+
+		mmc-hs200-1_8v;
+		non-removable;
+
+		vmmc-supply = <&vdd_hv_sdmmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		/* HIFI CODEC */
+		i2s@70301000 {		/* i2s0 */
+			status = "okay";
+		};
+
+		/* LEFT SPK */
+		i2s@70301100 {		/* i2s1 */
+			status = "okay";
+		};
+
+		/* RIGHT SPK */
+		i2s@70301200 {		/* i2s2 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70301300 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	usb1: usb@7d000000 {
+		compatible = "nvidia,tegra124-udc";
+		status = "okay";
+		dr_mode = "otg";
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		usb-role-switch;
+		extcon = <&bq24192>, <&palmas_extcon>; /* vbus, id */
+		vbus-supply = <&usb_otg_vbus>;
+
+		port {
+			usb_in: endpoint {
+				remote-endpoint = <&connector_out>;
+			};
+		};
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&avdd_usb>;
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+
+		charge-full-design-microamp-hours = <6520000>;
+		energy-full-design-microwatt-hours = <2478000>;
+
+		voltage-min-design-microvolt = <4300000>;
+		voltage-max-design-microvolt = <4350000>;
+
+		precharge-current-microamp = <256000>;
+		charge-term-current-microamp = <400000>;
+
+		operating-range-celsius = <0 45>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ref-oscillator";
+	};
+
+	connector {
+		compatible = "usb-b-connector";
+		type = "micro";
+
+		port {
+			connector_out: endpoint {
+				remote-endpoint = <&usb_in>;
+			};
+		};
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			#cooling-cells = <2>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-back-hall-sensor {
+			label = "Hall sensor (back)";
+			gpios = <&gpio TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		switch-front-hall-sensor {
+			label = "Hall sensor (front)";
+			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-button {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_BACKLIGHT;
+
+			pwms = <&pwm 1 10000>;
+			max-brightness = <100>;
+		};
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_3v3_sys: regulator-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vddio_1v8_bl: regulator-bl-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_1v8_bl";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vdd_lcd_io: regulator-lcd-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vsp_5v5_lcd: regulator-vsp {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_lcd_vsp";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vsn_5v5_lcd: regulator-vsn {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_lcd_vsn";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_2v8_tp: regulator-vtp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_2v8_tp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_smps10_out2>;
+	};
+
+	iovdd_1v8_cam: regulator-iovdd-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "iovdd_1v8_cam";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&palmas_gpio 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	dvdd_1v2_cam: regulator-dvdd-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd_1v2_cam";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&palmas_gpio 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vdd_3v3_hph: regulator-hph {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_hph";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	thermal-zones {
+		/*
+		 * TMP451 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * tablet from getting too hot from a user's tactile
+		 * perspective. The CPU zone is intended to protect
+		 * silicon from damage.
+		 */
+
+		tmp451-skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <10000>; /* milliseconds */
+
+			thermal-sensors = <&temp_sensor 0>;
+
+			trips {
+				skip_alert_trip: skin-alert {
+					/* throttle at 50C until temperature drops to 49.5C */
+					temperature = <50000>;
+					hysteresis = <500>;
+					type = "passive";
+				};
+
+				skin-crit {
+					/* shut down at 85C */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map-skip {
+					trip = <&skip_alert_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		tmp451-cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <10000>; /* milliseconds */
+
+			thermal-sensors = <&temp_sensor 1>;
+
+			trips {
+				cpu_alert_trip: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.5C */
+					temperature = <85000>;
+					hysteresis = <500>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					/* shut down at 95C */
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map-cpu {
+					trip = <&cpu_alert_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra124.dtsi b/arch/arm/boot/dts/nvidia/tegra124.dtsi
index 8f1fff373461..ce4efa1de509 100644
--- a/arch/arm/boot/dts/nvidia/tegra124.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124.dtsi
@@ -103,6 +103,45 @@
 
 		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
 
+		vi@54080000 {
+			compatible = "nvidia,tegra124-vi";
+			reg = <0x0 0x54080000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+
+			iommus = <&mc TEGRA_SWGROUP_VI>;
+
+			status = "disabled";
+		};
+
+		isp@54600000 {
+			compatible = "nvidia,tegra124-isp";
+			reg = <0x0 0x54600000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_ISP>;
+			resets = <&tegra_car TEGRA124_CLK_ISP>;
+			reset-names = "isp";
+
+			iommus = <&mc TEGRA_SWGROUP_ISP2>;
+
+			status = "disabled";
+		};
+
+		isp@54680000 {
+			compatible = "nvidia,tegra124-isp";
+			reg = <0x0 0x54680000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_ISPB>;
+			resets = <&tegra_car TEGRA124_CLK_ISPB>;
+			reset-names = "isp";
+
+			iommus = <&mc TEGRA_SWGROUP_ISP2B>;
+
+			status = "disabled";
+		};
+
 		dc@54200000 {
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
@@ -165,6 +204,22 @@
 			status = "disabled";
 		};
 
+		dsia: dsi@54300000 {
+			compatible = "nvidia,tegra124-dsi";
+			reg = <0x0 0x54300000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA124_CLK_DSIA>,
+				 <&tegra_car TEGRA124_CLK_DSIALP>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		vic@54340000 {
 			compatible = "nvidia,tegra124-vic";
 			reg = <0x0 0x54340000 0x0 0x00040000>;
@@ -177,6 +232,47 @@
 			iommus = <&mc TEGRA_SWGROUP_VIC>;
 		};
 
+		dsib: dsi@54400000 {
+			compatible = "nvidia,tegra124-dsi";
+			reg = <0x0 0x54400000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA124_CLK_DSIB>,
+				 <&tegra_car TEGRA124_CLK_DSIBLP>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		msenc@544c0000 {
+			compatible = "nvidia,tegra124-msenc";
+			reg = <0x0 0x544c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_MSENC>;
+			resets = <&tegra_car TEGRA124_CLK_MSENC>;
+			reset-names = "mpe";
+
+			iommus = <&mc TEGRA_SWGROUP_MSENC>;
+
+			status = "disabled";
+		};
+
+		tsec@54500000 {
+			compatible = "nvidia,tegra124-tsec";
+			reg = <0x0 0x54500000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_TSEC>;
+			resets = <&tegra_car TEGRA124_CLK_TSEC>;
+
+			iommus = <&mc TEGRA_SWGROUP_TSEC>;
+
+			status = "disabled";
+		};
+
 		sor@54540000 {
 			compatible = "nvidia,tegra124-sor";
 			reg = <0x0 0x54540000 0x0 0x00040000>;
@@ -938,6 +1034,14 @@
 		};
 	};
 
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra124-mipi";
+		reg = <0x0 0x700e3000 0x0 0x100>;
+		clocks = <&tegra_car TEGRA124_CLK_MIPI_CAL>;
+		clock-names = "mipi-cal";
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
 	dfll: clock@70110000 {
 		compatible = "nvidia,tegra124-dfll";
 		reg = <0 0x70110000 0 0x100>, /* DFLL control */
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts
new file mode 100644
index 000000000000..8828129d1fa3
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-asus-transformer-common.dtsi"
+
+/ {
+	model = "ASUS Eee Pad Slider SL101";
+	compatible = "asus,sl101", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		magnetometer@e {
+			mount-matrix =  "1",  "0",  "0",
+					"0", "-1",  "0",
+					"0",  "0",  "1";
+		};
+
+		/* Atmel MXT1386 Touchscreen */
+		touchscreen@5a {
+			compatible = "atmel,maxtouch";
+			reg = <0x5a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			mount-matrix =	 "0",  "1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0",  "1";
+
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =	 "1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-tablet-mode {
+			label = "Tablet Mode";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
index e118809dc6d9..0d93820a5ad4 100644
--- a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
@@ -1,542 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-#include <dt-bindings/input/atmel-maxtouch.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-
-#include "tegra20.dtsi"
-#include "tegra20-cpu-opp.dtsi"
-#include "tegra20-cpu-opp-microvolt.dtsi"
+#include "tegra20-asus-transformer-common.dtsi"
 
 / {
-	model = "ASUS EeePad Transformer TF101";
+	model = "ASUS Eee Pad Transformer TF101";
 	compatible = "asus,tf101", "nvidia,tegra20";
-	chassis-type = "convertible";
-
-	aliases {
-		mmc0 = &sdmmc4; /* eMMC */
-		mmc1 = &sdmmc3; /* MicroSD */
-		mmc2 = &sdmmc1; /* WiFi */
-
-		rtc0 = &pmic;
-		rtc1 = "/rtc@7000e000";
-
-		serial0 = &uartd;
-		serial1 = &uartc; /* Bluetooth */
-		serial2 = &uartb; /* GPS */
-	};
-
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	memory@0 {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ramoops@2ffe0000 {
-			compatible = "ramoops";
-			reg = <0x2ffe0000 0x10000>;	/* 64kB */
-			console-size = <0x8000>;	/* 32kB */
-			record-size = <0x400>;		/*  1kB */
-			ecc-size = <16>;
-		};
-
-		linux,cma@30000000 {
-			compatible = "shared-dma-pool";
-			alloc-ranges = <0x30000000 0x10000000>;
-			size = <0x10000000>; /* 256MiB */
-			linux,cma-default;
-			reusable;
-		};
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				port {
-					lcd_output: endpoint {
-						remote-endpoint = <&lvds_encoder_input>;
-						bus-width = <18>;
-					};
-				};
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-			hdmi-supply = <&vdd_hdmi_en>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio@6000d000 {
-		charging-enable-hog {
-			gpio-hog;
-			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
-			output-low;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "spia",
-					"spib", "spic";
-				nvidia,function = "gmi";
-			};
-
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-
-			lm1 {
-				nvidia,pins = "lm1";
-				nvidia,function = "rsvd3";
-			};
-
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "vi";
-			};
-
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-
-			gmd {
-				nvidia,pins = "gmd";
-				nvidia,function = "sflash";
-			};
-
-			gpu {
-				nvidia,pins = "gpu";
-				nvidia,function = "pwm";
-			};
-
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-
-			gpv {
-				nvidia,pins = "gpv", "slxa";
-				nvidia,function = "pcie";
-			};
-
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-			};
-
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-
-			lcsn {
-				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
-					"lsdi", "lvp0";
-				nvidia,function = "rsvd4";
-			};
-
-			ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
-					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
-					"lspi", "lvp1", "lvs";
-				nvidia,function = "displaya";
-			};
-
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
-				nvidia,function = "sdio3";
-			};
-
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-
-			slxd {
-				nvidia,pins = "slxd";
-				nvidia,function = "spdif";
-			};
-
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd",
-					"cdev1", "cdev2", "dap1", "dap4",
-					"dte", "ddc", "dtf", "gma", "gmc",
-					"gme", "gpu", "gpu7", "gpv", "i2cp",
-					"irrx", "irtx", "pta", "rm", "sdc",
-					"sdd", "slxc", "slxd", "slxk", "spdi",
-					"spdo", "uac", "uad",
-					"uda", "csus";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_ate {
-				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
-					"owc", "spia", "spib", "spic",
-					"spid", "spie", "spig", "slxa";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-
-			conf_crtp {
-				nvidia,pins = "crtp", "spih";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_spif {
-				nvidia,pins = "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf", "sdio1", "uaa", "uab",
-					"uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
-					"lvp1", "lvs", "pmc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <31>;
-				nvidia,pull-up-strength = <31>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-			};
-
-			drive_csus {
-				nvidia,pins = "drive_csus";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <31>;
-				nvidia,pull-up-strength = <31>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-			};
-		};
-
-		state_i2cmux_ddc: pinmux-i2cmux-ddc {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_idle: pinmux-i2cmux-idle {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_pta: pinmux-i2cmux-pta {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
-			};
-		};
-	};
-
-	spdif@70002400 {
-		status = "okay";
-
-		nvidia,fixed-parent-rate;
-	};
-
-	i2s@70002800 {
-		status = "okay";
-
-		nvidia,fixed-parent-rate;
-	};
-
-	serial@70006040 {
-		compatible = "nvidia,tegra20-hsuart";
-		reset-names = "serial";
-		/delete-property/ reg-shift;
-		/* GPS BCM4751 */
-	};
-
-	serial@70006200 {
-		compatible = "nvidia,tegra20-hsuart";
-		reset-names = "serial";
-		/delete-property/ reg-shift;
-		status = "okay";
-
-		/* Azurewave AW-NH615 BCM4329B1 */
-		bluetooth {
-			compatible = "brcm,bcm4329-bt";
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "host-wakeup";
-
-			/* PLLP 216MHz / 16 / 4 */
-			max-speed = <3375000>;
-
-			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-			clock-names = "txco";
-
-			vbat-supply  = <&vdd_3v3_sys>;
-			vddio-supply = <&vdd_1v8_sys>;
-
-			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	serial@70006300 {
-		/delete-property/ dmas;
-		/delete-property/ dma-names;
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
 
 	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		/* Aichi AMI306 digital compass */
 		magnetometer@e {
-			compatible = "asahi-kasei,ak8974";
-			reg = <0xe>;
-
-			avdd-supply = <&vdd_3v3_sys>;
-			dvdd-supply = <&vdd_1v8_sys>;
-
 			mount-matrix = "-1",  "0",  "0",
 					"0",  "1",  "0",
 					"0",  "0", "-1";
 		};
 
-		wm8903: audio-codec@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_BOTH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0x83>;
-			micdet-delay = <100>;
-
-			gpio-cfg = <
-				0x00000600 /* DMIC_LR, output */
-				0x00000680 /* DMIC_DAT, input */
-				0x00000000 /* Speaker-enable GPIO, output, low */
-				0xffffffff /* don't touch */
-				0xffffffff /* don't touch */
-			>;
-
-			AVDD-supply  = <&vdd_1v8_sys>;
-			CPVDD-supply = <&vdd_1v8_sys>;
-			DBVDD-supply = <&vdd_1v8_sys>;
-			DCVDD-supply = <&vdd_1v8_sys>;
-		};
-
 		/* Atmel MXT1386 Touchscreen */
 		touchscreen@5b {
 			compatible = "atmel,maxtouch";
@@ -554,33 +31,12 @@
 		};
 
 		gyroscope@68 {
-			compatible = "invensense,mpu3050";
-			reg = <0x68>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
-
-			vdd-supply    = <&vdd_3v3_sys>;
-			vlogic-supply = <&vdd_1v8_sys>;
-
 			mount-matrix =	 "0",  "1",  "0",
 					"-1",  "0",  "0",
 					 "0",  "0",  "1";
 
 			i2c-gate {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				accelerometer@f {
-					compatible = "kionix,kxtf9";
-					reg = <0xf>;
-
-					interrupt-parent = <&gpio>;
-					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
-
-					vdd-supply = <&vdd_1v8_sys>;
-					vddio-supply = <&vdd_1v8_sys>;
-
 					mount-matrix =	"-1",  "0",  "0",
 							 "0", "-1",  "0",
 							 "0",  "0", "-1";
@@ -589,461 +45,9 @@
 		};
 	};
 
-	i2c2: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: pmic@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_5v0_sys>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				vdd_core: sm0 {
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
-					regulator-coupled-max-spread = <170000 550000>;
-					regulator-always-on;
-					regulator-boot-on;
-
-					nvidia,tegra-core-regulator;
-				};
-
-				vdd_cpu: sm1 {
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1125000>;
-					regulator-coupled-with = <&vdd_core &rtc_vdd>;
-					regulator-coupled-max-spread = <550000 550000>;
-					regulator-always-on;
-					regulator-boot-on;
-
-					nvidia,tegra-cpu-regulator;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				rtc_vdd: ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-coupled-with = <&vdd_core &vdd_cpu>;
-					regulator-coupled-max-spread = <170000 550000>;
-					regulator-always-on;
-					regulator-boot-on;
-
-					nvidia,tegra-rtc-regulator;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				vcore_emmc: ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		nct1008: temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-			vcc-supply = <&vdd_3v3_sys>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
-
-			#thermal-sensor-cells = <1>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <100>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <458>;
-		nvidia,sys-clock-req-active-high;
-		core-supply = <&vdd_core>;
-	};
-
-	memory-controller@7000f400 {
-		nvidia,use-ram-code;
-
-		emc-tables@3 {
-			reg = <0x3>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			emc-table@25000 {
-				reg = <25000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <25000>;
-				nvidia,emc-registers = <0x00000002 0x00000006
-					0x00000003 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000004
-					0x00000003 0x00000008 0x0000000b 0x0000004d
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x00000004
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x00000068 0x00000000 0x00000003
-					0x00000000 0x00000000 0x00000282 0xa0ae04ae
-					0x00070000 0x00000000 0x00000000 0x00000003
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@50000 {
-				reg = <50000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <50000>;
-				nvidia,emc-registers = <0x00000003 0x00000007
-					0x00000003 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000005
-					0x00000003 0x00000008 0x0000000b 0x0000009f
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x00000007
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x000000d0 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000282 0xa0ae04ae
-					0x00070000 0x00000000 0x00000000 0x00000005
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@75000 {
-				reg = <75000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <75000>;
-				nvidia,emc-registers = <0x00000005 0x0000000a
-					0x00000004 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000005
-					0x00000003 0x00000008 0x0000000b 0x000000ff
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x0000000b
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x00000138 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000282 0xa0ae04ae
-					0x00070000 0x00000000 0x00000000 0x00000007
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@150000 {
-				reg = <150000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <150000>;
-				nvidia,emc-registers = <0x00000009 0x00000014
-					0x00000007 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000005
-					0x00000003 0x00000008 0x0000000b 0x0000021f
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x00000015
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x00000270 0x00000000 0x00000001
-					0x00000000 0x00000000 0x00000282 0xa07c04ae
-					0x007dc010 0x00000000 0x00000000 0x0000000e
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@300000 {
-				reg = <300000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <300000>;
-				nvidia,emc-registers = <0x00000012 0x00000027
-					0x0000000d 0x00000006 0x00000007 0x00000005
-					0x00000003 0x00000009 0x00000006 0x00000006
-					0x00000003 0x00000003 0x00000002 0x00000006
-					0x00000003 0x00000009 0x0000000c 0x0000045f
-					0x00000000 0x00000004 0x00000004 0x00000006
-					0x00000008 0x00000001 0x0000000e 0x0000002a
-					0x00000003 0x0000000f 0x00000007 0x00000005
-					0x00000002 0x000004e0 0x00000005 0x00000002
-					0x00000000 0x00000000 0x00000282 0xe059048b
-					0x007e0010 0x00000000 0x00000000 0x0000001b
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			lpddr2 {
-				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
-				revision-id = <1 0>;
-				density = <2048>;
-				io-width = <16>;
-			};
-		};
-	};
-
-	/* Peripheral USB via ASUS connector */
-	usb@c5000000 {
-		compatible = "nvidia,tegra20-udc";
-		status = "okay";
-		dr_mode = "peripheral";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		dr_mode = "peripheral";
-		nvidia,xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_5v0_sys>;
-	};
-
-	/* Dock's USB port */
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-		nvidia,xcvr-setup-use-fuses;
-		vbus-supply = <&vdd_5v0_sys>;
-	};
-
-	sdmmc1: mmc@c8000000 {
-		status = "okay";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
-		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
-		assigned-clock-rates = <40000000>;
-
-		max-frequency = <40000000>;
-		keep-power-in-suspend;
-		bus-width = <4>;
-		non-removable;
-
-		mmc-pwrseq = <&brcm_wifi_pwrseq>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-
-		/* Azurewave AW-NH615 BCM4329B1 */
-		wifi@1 {
-			compatible = "brcm,bcm4329-fmac";
-			reg = <1>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "host-wake";
-		};
-	};
-
-	sdmmc3: mmc@c8000400 {
-		status = "okay";
-		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-	};
-
-	sdmmc4: mmc@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		vmmc-supply = <&vcore_emmc>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-		non-removable;
-	};
-
-	mains: ac-adapter-detect {
-		compatible = "gpio-charger";
-		charger-type = "mains";
-		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_3v3_sys>;
-		pwms = <&pwm 2 4000000>;
-
-		brightness-levels = <7 255>;
-		num-interpolated-steps = <248>;
-		default-brightness-level = <20>;
-	};
-
-	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock-32k-in {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		#clock-cells = <0>;
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@1 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-	};
-
-	display-panel {
-		compatible = "auo,b101ew05", "panel-lvds";
-
-		/* AUO B101EW05 using custom timings */
-
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&lvds_ddc>;
-		power-supply = <&vdd_pnl_reg>;
-
-		width-mm = <218>;
-		height-mm = <135>;
-
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			clock-frequency = <71200000>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <8>;
-			hback-porch = <18>;
-			hsync-len = <184>;
-			vsync-len = <3>;
-			vfront-porch = <4>;
-			vback-porch = <8>;
-		};
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
-	};
-
-	gpio-keys {
+	extcon-keys {
 		compatible = "gpio-keys";
 
-		key-power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
 		switch-dock-hall-sensor {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
@@ -1054,242 +58,4 @@
 			wakeup-source;
 		};
 	};
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c2>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			smart-battery@b {
-				compatible = "ti,bq20z75", "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,i2c-retry-count = <2>;
-				sbs,poll-retry-count = <10>;
-				power-supplies = <&mains>;
-			};
-		};
-	};
-
-	lvds-encoder {
-		compatible = "ti,sn75lvds83", "lvds-encoder";
-
-		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_3v3_sys>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&lcd_output>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-	};
-
-	opp-table-emc {
-		/delete-node/ opp-666000000;
-		/delete-node/ opp-760000000;
-	};
-
-	vdd_5v0_sys: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vdd_3v3_sys: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3_vs";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	regulator-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "pcie_vdd";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-	};
-
-	vdd_pnl_reg: regulator-panel {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_pnl";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vdd_1v8_sys: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_1v8_vs";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_hdmi_en: regulator-hdmi {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0_hdmi_en";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "asus,tegra-audio-wm8903-tf101",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Asus EeePad Transformer WM8903";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"IN2L", "Mic Jack",
-			"DMICDAT", "Int Mic";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
-		nvidia,coupled-mic-hp-det;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	thermal-zones {
-		/*
-		 * NCT1008 has two sensors:
-		 *
-		 *	0: internal that monitors ambient/skin temperature
-		 *	1: external that is connected to the CPU's diode
-		 *
-		 * Ideally we should use userspace thermal governor,
-		 * but it's a much more complex solution.  The "skin"
-		 * zone is a simpler solution which prevents TF101 from
-		 * getting too hot from a user's tactile perspective.
-		 * The CPU zone is intended to protect silicon from damage.
-		 */
-
-		skin-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 0>;
-
-			trips {
-				trip0: skin-alert {
-					/* start throttling at 60C */
-					temperature = <60000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-
-				trip1: skin-crit {
-					/* shut down at 70C */
-					temperature = <70000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&trip0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 1>;
-
-			trips {
-				trip2: cpu-alert {
-					/* throttle at 85C until temperature drops to 84.8C */
-					temperature = <85000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-
-				trip3: cpu-crit {
-					/* shut down at 90C */
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map1 {
-					trip = <&trip2>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
-	brcm_wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <200>;
-		power-off-delay-us = <200>;
-	};
 };
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
new file mode 100644
index 000000000000..b48f53c00efa
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
@@ -0,0 +1,1268 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd;
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi_en>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio@6000d000 {
+		charging-enable-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+			};
+
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+
+			conf-ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap4",
+					"dte", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm", "sdc",
+					"sdd", "slxc", "slxd", "slxk", "spdi",
+					"spdo", "uac", "uad",
+					"uda", "csus";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-ate {
+				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
+					"owc", "spia", "spib", "spic",
+					"spid", "spie", "spig", "slxa";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+
+			conf-crtp {
+				nvidia,pins = "crtp", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+
+			conf-ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-ld17-0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive-csus {
+				nvidia,pins = "drive_csus";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	i2s@70002800 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		/* GPS BCM4751 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0xe>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_sys>;
+		};
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0x83>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0xf>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+				};
+			};
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_sys>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@3 {
+			reg = <0x3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dc010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e0 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			lpddr2 {
+				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+				revision-id = <1 0>;
+				density = <2048>;
+				io-width = <16>;
+			};
+		};
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <40000000>;
+
+		max-frequency = <40000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 4000000>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		/* AUO B101EW05 using custom timings */
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c2>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+				power-supplies = <&mains>;
+			};
+
+			/* Dynaimage ambient light sensor */
+			light-sensor@1c {
+				compatible = "dynaimage,al3000a";
+				reg = <0x1c>;
+
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+				vdd-supply = <&vdd_1v8_sys>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie_vdd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi_en: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf101",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus EeePad Transformer WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents TF101 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <200>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20.dtsi b/arch/arm/boot/dts/nvidia/tegra20.dtsi
index 8da75ccc4402..c60fc1971188 100644
--- a/arch/arm/boot/dts/nvidia/tegra20.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20.dtsi
@@ -64,7 +64,7 @@
 
 		vi@54080000 {
 			compatible = "nvidia,tegra20-vi";
-			reg = <0x54080000 0x00040000>;
+			reg = <0x54080000 0x00000800>;
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA20_CLK_VI>;
 			resets = <&tegra_car 20>;
@@ -72,6 +72,23 @@
 			power-domains = <&pd_venc>;
 			operating-points-v2 = <&vi_dvfs_opp_table>;
 			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0x0 0x54080000 0x4000>;
+
+			csi: csi@800 {
+				compatible = "nvidia,tegra20-csi";
+				reg = <0x800 0x200>;
+				clocks = <&tegra_car TEGRA20_CLK_CSI>;
+				power-domains = <&pd_venc>;
+				#nvidia,mipi-calibrate-cells = <1>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		epp@540c0000 {
@@ -284,7 +301,7 @@
 		reg = <0x60007000 0x1000>;
 	};
 
-	apbdma: dma@6000a000 {
+	apbdma: dma-controller@6000a000 {
 		compatible = "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1200>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts b/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
index fc284155cd76..ccb9f29c5de3 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
@@ -91,11 +91,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
index 9d08e2b094b4..bc353324df43 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
@@ -92,11 +92,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts
new file mode 100644
index 000000000000..9241cc269a89
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts
@@ -0,0 +1,2087 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Asus Portable AiO P1801-T";
+	compatible = "asus,p1801-t", "nvidia,tegra30";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		framebuffer@abe01000 {
+			reg = <0xabe01000 (1920 * 1080 * 4)>;
+			no-map;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+
+		ramoops@fea00000 {
+			compatible = "ramoops";
+			reg = <0xfea00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			port {
+				hdmi_out: endpoint {
+					remote-endpoint = <&bridge_in>;
+				};
+			};
+		};
+	};
+
+	gpio@6000d000 {
+		init-lpm-in-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		init-lpm-out-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		tp-vendor-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi-d1-pd5 {
+				nvidia,pins = "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d5_pl3",
+					      "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-d8-pl6 {
+				nvidia,pins = "vi_d8_pl6",
+					      "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-rst-n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			drive-sdmmc4 {
+				nvidia,pins = "drive_gma",
+					      "drive_gmb",
+					      "drive_gmc",
+					      "drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			hotplug-i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi-cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi-data0-po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data1-po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data5-po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data7-po0 {
+				nvidia,pins = "ulpi_data7_po0",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb-txd-rts {
+				nvidia,pins = "uart2_txd_pc2",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uartb-rxd-cts {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc-rxd-cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc-txd-rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi-nxt-py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap-i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-fs {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-dout {
+				nvidia,pins = "dap3_dout_pp2",
+					      "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* sensors pinmux */
+			nct-irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec-irqs {
+				nvidia,pins = "kb_row10_ps2",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ec-reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* memory type bootstrap */
+			mem-boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+					      "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex-l2-rst-n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+					      "pex_l0_rst_n_pdd1",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex-l2-clkreq-n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+					      "pex_l0_prsnt_n_pdd0",
+					      "pex_l0_clkreq_n_pdd2",
+					      "pex_wake_n_pdd3",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1-mosi-px4 {
+				nvidia,pins = "spi1_mosi_px4",
+					      "spi1_sck_px5",
+					      "spi1_cs0_n_px6",
+					      "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2-sck-px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-a17-pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+					      "gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-a18-pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-a19-pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pclk_pb3",
+					      "lcd_pwr1_pc1",
+					      "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_vsync_pj4",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_dc0_pn6",
+					      "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-cs0-n-pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+					      "lcd_sdout_pn5",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col1-pq1 {
+				nvidia,pins = "kb_row1_pr1",
+					      "kb_row3_pr3",
+					      "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col4-pq4 {
+				nvidia,pins = "kb_col4_pq4",
+					      "kb_col5_pq5",
+					      "kb_col7_pq7",
+					      "kb_row2_pr2",
+					      "kb_row4_pr4",
+					      "kb_row5_pr5",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-wp-n-pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+					      "gmi_wait_pi7",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-pclk-pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power-key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vol-keys {
+				nvidia,pins = "kb_col2_pq2",
+					      "kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt-shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt-dev-wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+					      "vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-d10-pt2 {
+				nvidia,pins = "vi_d10_pt2",
+					      "vi_d0_pt4",
+					      "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad1_pg1",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_wr_n_pi0",
+					      "gmi_oe_n_pi1",
+					      "gmi_dqs_pi2",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad13-ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-ad10-ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad12-ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+					      "gmi_rst_n_pi4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* USB2 VBUS control */
+			usb2-vbus-control {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pinmux */
+			pwm-0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwm-2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* S/PDIF pinmux */
+			spdif-out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif-in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-d4-pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-d6-pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1-out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sys-clk-req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+					      "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-req-pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* P1801-T specific pinmux */
+			lcd-pwr2 {
+				nvidia,pins = "lcd_pwr2_pc6",
+					      "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-m1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			key-mode {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			splashtop {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			w8-detect {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2-mosi-px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tp-vendor {
+				nvidia,pins = "kb_row6_pr6",
+					      "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tp-power {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-dap1 {
+				nvidia,pins = "drive_dap1",
+					      "drive_dap2",
+					      "drive_dbg",
+					      "drive_at5",
+					      "drive_gme",
+					      "drive_ddc",
+					      "drive_ao1",
+					      "drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1",
+					      "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-AH691 BCM43241B0 */
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <280000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Nuvoton NPCE791LA0DX embedded controller */
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		accelerometer@f {
+			compatible = "kionix,kxtf9";
+			reg = <0x0f>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 5) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_1v8_vio>;
+			vddio-supply = <&vdd_1v8_vio>;
+
+			mount-matrix = "0", "1", "0",
+				       "1", "0", "0",
+				       "0", "0", "1";
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <33000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		rt5640: audio-codec@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+
+			realtek,dmic1-data-pin = <1>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+
+			realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_bat>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vddio_ddr>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* vdd1 is not used by Portable AiO */
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3100000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* ldo5 is not used by Portable AiO */
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-3 {
+			/* Micron 2GB 800MHz */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x00000018 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000b 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-3 {
+			/* Micron 2GB 800MHz */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000003 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000012 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000018 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000c00a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10202 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 { /* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 { /* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		/* SDR104 mode unsupported yet */
+		max-frequency = <104000000>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;	/* ldo2 */
+		vqmmc-supply = <&vddio_usd>;	/* ldo3 */
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-AH691 BCM43241B0 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-3_3v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* mini-USB port */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&usb2_vbus>;
+	};
+
+	/* Full size USB */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	pad_battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <5136000>;
+		energy-full-design-microwatt-hours = <38000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	/* Connected to a 18.4" LVDS panel */
+	bridge {
+		compatible = "mstar,tsumu88adt3-lf-1";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "HDMI";
+		type = "a";
+
+		/* low: tablet, high: dock */
+		hpd-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+		ddc-i2c-bus = <&hdmi_ddc>;
+		ddc-en-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-docking-station-mode {
+			label = "Mode";
+			gpios = <&gpio TEGRA_GPIO(K, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MODE>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	opp-table-actmon {
+		opp-800000000 {
+			opp-supported-hw = <0x0006>;
+		};
+
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		opp-800000000-1300 {
+			opp-supported-hw = <0x0006>;
+		};
+
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5640-p1801-t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus Portable AiO P1801-T RT5642";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"DMIC1", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution. The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * the Portable AiO from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts
new file mode 100644
index 000000000000..2ef9d8737901
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts
@@ -0,0 +1,857 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad LTE TF300TL";
+	compatible = "asus,tf300tl", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300tl-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+					      "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_vsync_pv7 {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =  "-1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0",  "1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0a000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	pad_battery: battery-pad {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2940000>;
+		energy-full-design-microwatt-hours = <22000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	dock_battery: battery-dock {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2260000>;
+		energy-full-design-microwatt-hours = <16000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf300tl",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Pad TF300TL RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
new file mode 100644
index 000000000000..5d9e23a43820
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
@@ -0,0 +1,2500 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Asus VivoTab RT TF600T";
+	compatible = "asus,tf600t", "nvidia,tegra30";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi-d1-pd5 {
+				nvidia,pins = "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d5_pl3",
+					      "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-d8-pl6 {
+				nvidia,pins = "vi_d8_pl6",
+					      "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-rst-n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			hotplug-i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi-cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi-data0-po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data1-po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data5-po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data7-po0 {
+				nvidia,pins = "ulpi_data7_po0",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb-txd-rts {
+				nvidia,pins = "uart2_txd_pc2",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uartb-rxd-cts {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc-rxd-cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc-txd-rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi-nxt-py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap-i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-fs {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-din {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-dout {
+				nvidia,pins = "dap3_dout_pp2",
+					      "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			i2s4 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			nct-irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hall {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec-irqs {
+				nvidia,pins = "kb_row10_ps2",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ec-reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Memory type bootstrap */
+			mem-boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+					      "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex-l2-rst-n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+					      "pex_l0_rst_n_pdd1",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex-l2-clkreq-n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+					      "pex_l0_prsnt_n_pdd0",
+					      "pex_l0_clkreq_n_pdd2",
+					      "pex_wake_n_pdd3",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pclk_pb3",
+					      "lcd_pwr1_pc1",
+					      "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_vsync_pj4",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_dc0_pn6",
+					      "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-cs0-n-pn4 {
+				nvidia,pins = "lcd_sdout_pn5",
+					      "lcd_wr_n_pz3",
+					      "lcd_pwr2_pc6",
+					      "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb-col0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_row1_pr1",
+					      "kb_row3_pr3",
+					      "kb_row7_pr7",
+					      "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col5 {
+				nvidia,pins = "kb_col5_pq5",
+					      "kb_col7_pq7",
+					      "kb_row2_pr2",
+					      "kb_row4_pr4",
+					      "kb_row5_pr5",
+					      "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_wp_n_pc7",
+					      "gmi_wait_pi7",
+					      "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi-pclk-pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power-key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vol-keys {
+				nvidia,pins = "kb_col3_pq3",
+					      "kb_col4_pq4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt-shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt-dev-wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+					      "vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-d10-pt2 {
+				nvidia,pins = "vi_d10_pt2",
+					      "vi_d0_pt4",
+					      "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad1_pg1",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_wr_n_pi0",
+					      "gmi_oe_n_pi1",
+					      "gmi_dqs_pi2",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad13-ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-ad10-ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad12-ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+					      "gmi_rst_n_pi4",
+					      "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Vibrator control */
+			vibrator {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pinmux */
+			pwm-0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwm-2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-cs-n {
+				nvidia,pins = "gmi_cs4_n_pk2",
+					      "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Spdif pinmux */
+			spdif-out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif-in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi-d4-pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-d6-pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt-sync {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1-out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sys-clk-req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+					      "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-req-pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-dap1 {
+				nvidia,pins = "drive_dap1",
+					      "drive_dap2",
+					      "drive_dbg",
+					      "drive_at5",
+					      "drive_gme",
+					      "drive_ddc",
+					      "drive_ao1",
+					      "drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1",
+					      "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+			drive-sdmmc4 {
+				nvidia,pins = "drive_gma",
+					      "drive_gmb",
+					      "drive_gmc",
+					      "drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-NH665 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply = <&vdd_3v3_com>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	gen1_i2c: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* Nuvoton NPCE698LA0BX embedded controller */
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Atmel Maxtouch MXT1664 HID over I2C */
+		touchscreen@4b {
+			compatible = "hid-over-i2c";
+			reg = <0x4b>;
+
+			hid-descr-addr = <0x0000>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_LOW>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+			vddl-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* TI TPS61050/61052 Boost Converter */
+		flash-led@33 {
+			compatible = "ti,tps61052";
+			reg = <0x33>;
+
+			led {
+				color = <LED_COLOR_ID_WHITE>;
+			};
+		};
+
+		imu@69 {
+			compatible = "invensense,mpu6050";
+			reg = <0x69>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply   = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =	 "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				magnetometer@d {
+					compatible = "asahi-kasei,ak8975";
+					reg = <0x0d>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(D, 5) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_3v3_sys>;
+					vid-supply = <&vdd_1v8_vio>;
+
+					mount-matrix =	 "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0", "-1";
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		rt5640: audio-codec@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+		};
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vdd_3v3_sys>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				vdd_lcd: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* ldo2 and ldo3 are not used by TF600T */
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo5 {
+					regulator-name = "vddio_sdmmc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				avdd_dsi_csi: ldo6 {
+					regulator-name = "avdd_dsi_csi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		/* Capella CM3218 ambient light sensor */
+		light-sensor@48 {
+			compatible = "capella,cm32181";
+			reg = <0x48>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v3_als>;
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@1 {
+			compatible = "winbond,w25q32", "jedec,spi-nor";
+			reg = <1>;
+
+			spi-max-frequency = <20000000>;
+			vcc-supply = <&vdd_3v3_sys>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 2GB 750 MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74e30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x74430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x74040a06 0x001f0000 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc0000044
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086110a 0x001f0000 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emem-configuration = < 0x0000000b 0xc0000087
+					0x00000004 0x00000005 0x00000012 0x0000000c
+					0x0000000b 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d12 0x710c2213 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 2GB 750 MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emem-configuration = < 0x0000000b 0xc0000044
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000c0609 0x7086110a 0x001f0000 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emem-configuration = < 0x00000016 0xc0000087
+					0x00000003 0x00000004 0x00000012 0x0000000c
+					0x0000000b 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00150c12 0x710c2213 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 2GB 750 MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x74430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x74040a06 0x001f0000 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emem-configuration = < 0x0000000b 0xc0000044
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086110a 0x001f0000 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emem-configuration = < 0x00000016 0xc0000087
+					0x00000004 0x00000005 0x00000012 0x0000000c
+					0x0000000b 0x00000003 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d12 0x710c2213 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 2GB 750 MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000007 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000008 0x00000008
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000f 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000010 0x00000010
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001e 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000020 0x00000020
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x0000003d 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000040 0x00000040
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000011
+					0x0000006f 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000b2d 0x00000000 0x000002cb
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000075 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000b6d 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x00200084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x06000021 0x00000802 0x00020000
+					0x00000100 0x0150000c 0xa0f10000 0x00000000
+					0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000023
+					0x000000df 0x00000019 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000003 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x0000169a 0x00000000 0x000005a6
+					0x00000003 0x00000010 0x00000001 0x00000000
+					0x0000000e 0x00000018 0x000000e9 0x00000200
+					0x00000005 0x00000017 0x00000000 0x00000007
+					0x00000008 0x000016da 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0080191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x06000021 0x00000802 0x00020000
+					0x00000100 0x00df000c 0xa0f10000 0x00000000
+					0x00000000 0x80002d93 0xf8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 2GB 750 MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000011
+					0x00000060 0x0000000c 0x00000003 0x00000004
+					0x00000008 0x00000002 0x0000000a 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000b2d 0x00000000 0x000002cb
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x00000010 0x00000066 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000b6d 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007288 0x00200084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x08000168 0x06000021 0x00000802 0x00020000
+					0x00000100 0x015f000c 0xa0f10000 0x00000000
+					0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000023
+					0x000000c1 0x00000019 0x00000008 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000008
+					0x00000008 0x00000003 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x0000169a 0x00000000 0x000005a6
+					0x00000003 0x00000010 0x00000001 0x00000000
+					0x0000000e 0x00000018 0x000000cb 0x00000200
+					0x00000005 0x00000017 0x00000000 0x00000007
+					0x00000008 0x000016da 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0080191
+					0x00008000 0x00008008 0x00000008 0x00000008
+					0x00000008 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00fd000c 0xa0f10000 0x00000000
+					0x00000000 0x80002d93 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 2GB 750 MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001e 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000020 0x00000020
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x0000003d 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000040 0x00000040
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000011
+					0x0000006f 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000b2d 0x00000000 0x000002cb
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000075 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000b6d 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x00200084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0150000c 0xa0f10000 0x00000000
+					0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000023
+					0x000000df 0x00000019 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000006 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x0000169a 0x00000000 0x000005a6
+					0x00000003 0x00000010 0x00000001 0x00000000
+					0x0000000e 0x00000018 0x000000e9 0x00000200
+					0x00000005 0x00000017 0x00000000 0x00000007
+					0x00000008 0x000016da 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0080191
+					0x00008000 0x0000800a 0x0000000a 0x0000000a
+					0x0000000a 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x007fc00a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00df000c 0xa0f10000 0x00000000
+					0x00000000 0x80002d93 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {		/* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+		bus-width = <4>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		power-gpios =  <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vddio_usd>;
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-NH665 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-1_8v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 71428>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <15>;
+	};
+
+	pad_battery: battery-pad {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <6760000>;
+		energy-full-design-microwatt-hours = <25000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	dock_battery: battery-dock {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2980000>;
+		energy-full-design-microwatt-hours = <22000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-hall-sensor {
+			label = "Lid sensor";
+			gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_als: regulator-als {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_als";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5640-tf600t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus VivoTab RT TF600T RT5640";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"DMIC1", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Transformers from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
index 2f7754fd42a1..c6ef0a20c19f 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
@@ -108,8 +108,8 @@
 	i2c@7000c400 {
 		touchscreen@20 {
 			rmi4-f11@11 {
-				syna,clip-x-high = <1110>;
-				syna,clip-y-high = <1973>;
+				syna,clip-x-high = <1440>;
+				syna,clip-y-high = <2560>;
 
 				touchscreen-inverted-y;
 			};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts
index 4012f9c799a8..b7d0ebb766a6 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts
@@ -1155,6 +1155,14 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
+		embedded-controller@10 {
+			compatible = "pegatron,chagall-ec";
+			reg = <0x10>;
+
+			monitored-battery = <&battery>;
+			power-supplies = <&mains>;
+		};
+
 		/* Wolfson Microelectronics WM8903 audio codec */
 		wm8903: audio-codec@1a {
 			compatible = "wlf,wm8903";
@@ -2596,6 +2604,14 @@
 		default-brightness-level = <15>;
 	};
 
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <3050000>;
+		energy-full-design-microwatt-hours = <23000000>;
+		operating-range-celsius = <0 45>;
+	};
+
 	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
 	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/nvidia/tegra30.dtsi b/arch/arm/boot/dts/nvidia/tegra30.dtsi
index f866fa7b55a5..4c4e6097c916 100644
--- a/arch/arm/boot/dts/nvidia/tegra30.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30.dtsi
@@ -150,8 +150,8 @@
 		};
 
 		vi@54080000 {
-			compatible = "nvidia,tegra30-vi";
-			reg = <0x54080000 0x00040000>;
+			compatible = "nvidia,tegra30-vi", "nvidia,tegra20-vi";
+			reg = <0x54080000 0x00000800>;
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_VI>;
 			resets = <&tegra_car 20>;
@@ -162,6 +162,26 @@
 			iommus = <&mc TEGRA_SWGROUP_VI>;
 
 			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0x0 0x54080000 0x4000>;
+
+			csi: csi@800 {
+				compatible = "nvidia,tegra30-csi";
+				reg = <0x800 0x200>;
+				clocks = <&tegra_car TEGRA30_CLK_CSI>,
+					 <&tegra_car TEGRA30_CLK_CSIA_PAD>,
+					 <&tegra_car TEGRA30_CLK_CSIB_PAD>;
+				clock-names = "csi", "csia-pad", "csib-pad";
+				power-domains = <&pd_venc>;
+				#nvidia,mipi-calibrate-cells = <1>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		epp@540c0000 {
@@ -431,7 +451,7 @@
 		reg = <0x60007000 0x1000>;
 	};
 
-	apbdma: dma@6000a000 {
+	apbdma: dma-controller@6000a000 {
 		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index 39a153536d2a..de4142e8f3ce 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -69,6 +69,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-colibri-eval-v3.dtb \
 	imx6dl-colibri-iris.dtb \
 	imx6dl-colibri-iris-v2.dtb \
+	imx6dl-colibri-v1.2-aster.dtb \
+	imx6dl-colibri-v1.2-eval-v3.dtb \
+	imx6dl-colibri-v1.2-iris.dtb \
+	imx6dl-colibri-v1.2-iris-v2.dtb \
 	imx6dl-cubox-i.dtb \
 	imx6dl-cubox-i-emmc-som-v15.dtb \
 	imx6dl-cubox-i-som-v15.dtb \
@@ -158,6 +162,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-apalis-ixora.dtb \
 	imx6q-apalis-ixora-v1.1.dtb \
 	imx6q-apalis-ixora-v1.2.dtb \
+	imx6q-apalis-v1.2-eval.dtb \
+	imx6q-apalis-v1.2-eval-v1.2.dtb \
+	imx6q-apalis-v1.2-ixora.dtb \
+	imx6q-apalis-v1.2-ixora-v1.1.dtb \
+	imx6q-apalis-v1.2-ixora-v1.2.dtb \
 	imx6q-apf6dev.dtb \
 	imx6q-arm2.dtb \
 	imx6q-b450v3.dtb \
@@ -329,6 +338,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-0010.dtb \
 	imx6ul-tx6ul-0011.dtb \
 	imx6ul-tx6ul-mainboard.dtb \
+	imx6ul-var-som-concerto.dtb \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri-aster.dtb \
 	imx6ull-colibri-emmc-aster.dtb \
@@ -346,6 +356,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ull-dhcom-pdk2.dtb \
 	imx6ull-dhcom-picoitx.dtb \
 	imx6ull-dhcor-maveo-box.dtb \
+	imx6ull-engicam-microgea-bmm.dtb \
+	imx6ull-engicam-microgea-gtw.dtb \
+	imx6ull-engicam-microgea-rmm.dtb \
 	imx6ull-jozacp.dtb \
 	imx6ull-kontron-bl.dtb \
 	imx6ull-myir-mys-6ulx-eval.dtb \
diff --git a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
index dcc3c9d488a8..3bb11c5a6353 100644
--- a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
@@ -69,6 +69,14 @@
 		reg = <0x80000000 0x20000000>;
 	};
 
+	epd_pmic_supply: regulator-epd-pmic-in {
+		compatible = "regulator-fixed";
+		regulator-name = "epd_pmic_supply";
+		gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <20000>;
+	};
+
 	reg_wifi: regulator-wifi {
 		compatible = "regulator-fixed";
 		regulator-name = "SD3_SPWR";
@@ -133,7 +141,22 @@
 		vdd-supply = <&ldo5_reg>;
 	};
 
-	/* TODO: SY7636 PMIC for E Ink at 0x62 */
+	sy7636: pmic@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		vcom-en-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		epd-pwr-good-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&epd_pmic_supply>;
+
+		#thermal-sensor-cells = <0>;
+
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+			};
+		};
+	};
 
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index 9cfff2151b7e..82601a4b7b4b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -611,7 +611,7 @@
 			reg = <0x80000000 0x3b002000>;
 			ranges;
 
-			nfc: nand@bb000000 {
+			nfc: nand-controller@bb000000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx31-lite.dts b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
index d17abdfb6330..630f8fa69ba8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
@@ -157,7 +157,7 @@
 &weim {
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x0 0x200000>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx31.dtsi b/arch/arm/boot/dts/nxp/imx/imx31.dtsi
index 00006c90d9a7..8541a666747a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx31.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx31.dtsi
@@ -218,7 +218,7 @@
 			};
 
 			iim: efuse@5001c000 {
-				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx31-iim";
 				reg = <0x5001c000 0x1000>;
 				interrupts = <19>;
 				clocks = <&clks 25>;
@@ -340,7 +340,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			nfc: nand@b8000000 {
+			nfc: nand-controller@b8000000 {
 				compatible = "fsl,imx31-nand", "fsl,imx27-nand";
 				reg = <0xb8000000 0x1000>;
 				interrupts = <33>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
index ef546525e2ec..0064b5452b54 100644
--- a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
@@ -26,7 +26,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
index 30beb39e0162..111d7c0331f5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx35.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
@@ -363,7 +363,7 @@
 			reg = <0x80000000 0x40000000>;
 			ranges;
 
-			nfc: nand@bb000000 {
+			nfc: nand-controller@bb000000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
diff --git a/arch/arm/boot/dts/nxp/imx/imx50.dtsi b/arch/arm/boot/dts/nxp/imx/imx50.dtsi
index 1b6f444443dd..d76c496b3f71 100644
--- a/arch/arm/boot/dts/nxp/imx/imx50.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx50.dtsi
@@ -338,7 +338,7 @@
 			clks: ccm@53fd4000 {
 				compatible = "fsl,imx50-ccm";
 				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
+				interrupts = <71>, <72>;
 				#clock-cells = <1>;
 			};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
index dc72a2d14960..1980f751f161 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
@@ -165,7 +165,7 @@
 	mma7455l@1d {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_mma7455l>;
-		compatible = "fsl,mma7455l";
+		compatible = "fsl,mma7455";
 		reg = <0x1d>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
index 0a150c91d30f..244740d65b3d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
@@ -26,7 +26,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
index 7cd17b43b4b2..43ff5eafb2bb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
@@ -160,7 +160,7 @@
 		};
 	};
 
-	mdio_gpio: mdio-gpio {
+	mdio_gpio: mdio {
 		compatible = "virtual,mdio-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_swmdio>;
@@ -259,7 +259,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -271,7 +271,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts
index 625f9ac671ae..26eb7a9506e4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts
@@ -37,7 +37,7 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	mdio_gpio: mdio-gpio {
+	mdio_gpio: mdio {
 		compatible = "virtual,mdio-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_swmdio>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
index cc88da4d7785..c8698a9af1a7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
@@ -458,7 +458,7 @@
 			clks: ccm@73fd4000 {
 				compatible = "fsl,imx51-ccm";
 				reg = <0x73fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
+				interrupts = <71>, <72>;
 				#clock-cells = <1>;
 			};
 		};
@@ -476,7 +476,7 @@
 			};
 
 			iim: efuse@83f98000 {
-				compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon";
+				compatible = "fsl,imx51-iim";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -595,7 +595,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@83fdb000 {
+			nfc: nand-controller@83fdb000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx51-nand";
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
index ebbd4d93e460..543cf723008f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
@@ -42,14 +42,14 @@
 		led-bus {
 			label = "bus";
 			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 
 		led-error {
 			label = "error";
 			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
index df543b4751e0..89b17509ad48 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
@@ -47,7 +47,7 @@
 		interrupt-parent = <&gpio7>;
 		irq-trigger = <0x1>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
index c14eb7280f09..3cdb87ac1d7c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
@@ -162,7 +162,7 @@
 	};
 
 	expander: pca9554@20 {
-		compatible = "pca9554";
+		compatible = "nxp,pca9554";
 		reg = <0x20>;
 		interrupts = <109>;
 		#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
index e939acc1c88b..e45a97d3f449 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
@@ -537,6 +537,8 @@
 			mpl3115: pressure-sensor@60 {
 				compatible = "fsl,mpl3115";
 				reg = <0x60>;
+				vdd-supply = <&reg_3v3>;
+				vddio-supply = <&reg_3v3>;
 			};
 
 			eeprom: eeprom@50 {
@@ -593,7 +595,7 @@
 
 	touchscreen@4b {
 		compatible = "atmel,maxtouch";
-		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
 		reg = <0x4b>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts
index 2f06ad61a766..6938ad6dbc2c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts
@@ -28,6 +28,7 @@
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-rtc;
 		regulators {
 			sw1_reg: sw1a {
 				regulator-name = "SW1";
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
index 5f62c99909c5..872cf7e16f20 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts
index 9c9122da3737..96c37f4296e5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi
index 29e3f5f37c25..88855d3b2031 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2012-2017 <LW@KARO-electronics.de>
  * based on imx53-qsb.dts
  *   Copyright 2011 Freescale Semiconductor, Inc.
  *   Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "imx53.dtsi"
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts
index acc44010d510..3ad9db4b1442 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
  * USB armory MkI device tree file
  * https://inversepath.com/usbarmory
  *
  * Copyright (C) 2015, Inverse Path
  * Andrej Rosano <andrej@inversepath.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53.dtsi
index 845e2bf8460a..93225a56896f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53.dtsi
@@ -598,7 +598,7 @@
 			clks: ccm@53fd4000 {
 				compatible = "fsl,imx53-ccm";
 				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
+				interrupts = <71>, <72>;
 				#clock-cells = <1>;
 			};
 
@@ -668,7 +668,7 @@
 			};
 
 			iim: efuse@63f98000 {
-				compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon";
+				compatible = "fsl,imx53-iim";
 				reg = <0x63f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -775,7 +775,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@63fdb000 {
+			nfc: nand-controller@63fdb000 {
 				compatible = "fsl,imx53-nand";
 				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 				interrupts = <8>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
index 4989e8d069a1..9bb36db131c2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
@@ -25,7 +25,7 @@
 		clock-output-names = "enet_ref_pad";
 	};
 
-	i2c2-mux {
+	i2c-mux-2 {
 		compatible = "i2c-mux";
 		i2c-parent = <&i2c2>;
 		mux-controls = <&i2c_mux>;
@@ -45,7 +45,7 @@
 		};
 	};
 
-	i2c4-mux {
+	i2c-mux-4 {
 		compatible = "i2c-mux";
 		i2c-parent = <&i2c4>;
 		mux-controls = <&i2c_mux>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
index c9b2ea2b24b2..fc62ba2a4fcb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * support for the imx6 based aristainetos2 board
  *
  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
index 5e15212eaf3a..bf8e07f97143 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * support for the imx6 based aristainetos2 board
  *
  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
@@ -56,6 +20,7 @@
 	panel: panel {
 		compatible = "lg,lb070wv8";
 		backlight = <&backlight>;
+		power-supply = <&reg_3p3v>;
 		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 
 		port {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi
index 590dcc0953cc..5dc7f1f9ca17 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi
@@ -47,7 +47,8 @@
 	mpl3115a2: pressure-sensor@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
-
+		vdd-supply = <&reg_3v3>;
+		vddio-supply = <&reg_3v3>;
 		/*
 		 * The MPL3115 interrupts are connected to pin 22 and 23
 		 * of &tca6424a, but the binding does not yet support
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts
new file mode 100644
index 000000000000..44c78c07f431
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-aster.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Aster Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts
new file mode 100644
index 000000000000..93fd0af53a3c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-eval-v3.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Evaluation Board V3";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts
new file mode 100644
index 000000000000..92d41fc9a13f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris-v2.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Iris V2 Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts
new file mode 100644
index 000000000000..c8957948c887
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Iris Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts
index 82d5f85722ea..50dd3df9dd04 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts
index 59b8afc36e66..8ca5b6b8da07 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts
index 21bdfaf8df53..b94455406a57 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts
index 103261ea9334..dd978105b42f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts
index 9c6d3cd3d6a7..172dad423639 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts
index 7c62db91173b..47a6d63c8e04 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts
@@ -72,6 +72,7 @@
 	panel {
 		compatible = "edt,etm0700g0bdh6";
 		backlight = <&backlight>;
+		power-supply = <&reg_panel>;
 
 		port {
 			panel_in: endpoint {
@@ -89,6 +90,13 @@
 		enable-active-high;
 	};
 
+	reg_panel: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
index dfa8110b1d97..0ef24a07dedf 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
@@ -123,7 +123,7 @@
 			};
 		};
 
-		touch-thermal0 {
+		touch-0-thermal {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
@@ -137,7 +137,7 @@
 			};
 		};
 
-		touch-thermal1 {
+		touch-1-thermal {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
index 0b1275a8891f..2160b7177835 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
@@ -557,7 +557,6 @@
 
 &usbh1 {
 	vbus-supply = <&reg_h1_vbus>;
-	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
 	disable-over-current;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts
index 29dc6875ab66..353f7097cb7e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts
@@ -55,7 +55,7 @@
 
 	iio-hwmon {
 		compatible = "iio-hwmon";
-		io-channels = <&vdiv_vaccu>;
+		io-channels = <&vdiv_vaccu 0>;
 	};
 
 	keys {
@@ -256,7 +256,7 @@
 			};
 		};
 
-		touch-thermal0 {
+		touch-0-thermal {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
@@ -270,7 +270,7 @@
 			};
 		};
 
-		touch-thermal1 {
+		touch-1-thermal {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
@@ -318,7 +318,7 @@
 		io-channels = <&adc_ts 2>;
 		output-ohms = <2500>;
 		full-ohms = <64000>;
-		#io-channel-cells = <0>;
+		#io-channel-cells = <1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
index de80ca141bca..d5baec5e7a78 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
@@ -14,6 +14,7 @@
 / {
 	memory@10000000 {
 		reg = <0x10000000 0x40000000>;
+		device_type = "memory";
 	};
 
 	reg_3p3v: 3p3v {
@@ -157,7 +158,7 @@
 	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	rtc: m41t62@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t62";
 		reg = <0x68>;
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
index e9ac4768f36c..55b7e91d2ac0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
@@ -389,8 +389,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts
index 7436626673fc..136ae7841878 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts
index fc23b4d291a1..e1b525ed292a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts
index 9eb2ef17339c..9a6a5cda9a3b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts
index 4101c6597721..0e8f4c3f3760 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts
index a5532ecc18c5..9958e8701c98 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts
index 67ed0452f5de..d9bfd340efb2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts
index d34189fc52d9..8243f0d6d387 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts
index 7030b2654bbd..2d031403ab19 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts
index aef5fcc42904..684a2583db75 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts
index 5342f2f5a8a8..7fdc794615f2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts
index c4588fb0bf6f..209aaebe148a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
index 4875afadb630..76b0007d20ad 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
@@ -35,7 +35,7 @@
 
 	iio-hwmon {
 		compatible = "iio-hwmon";
-		io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
+		io-channels = <&vdiv_vaccu 0>, <&vdiv_hitch_pos 0>;
 	};
 
 	panel {
@@ -84,7 +84,7 @@
 			};
 		};
 
-		touch-thermal0 {
+		touch-0-thermal {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
@@ -98,7 +98,7 @@
 			};
 		};
 
-		touch-thermal1 {
+		touch-1-thermal {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
@@ -147,7 +147,7 @@
 		io-channels = <&adc_ts 2>;
 		output-ohms = <2500>;
 		full-ohms = <64000>;
-		#io-channel-cells = <0>;
+		#io-channel-cells = <1>;
 	};
 
 	vdiv_hitch_pos: voltage-divider-hitch-pos {
@@ -155,7 +155,7 @@
 		io-channels = <&adc_ts 6>;
 		output-ohms = <3300>;
 		full-ohms = <13300>;
-		#io-channel-cells = <0>;
+		#io-channel-cells = <1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index 8bc6376d0dc1..4a5736526927 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -279,28 +279,32 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		led@0 {
-			chan-name = "R";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <0>;
-			color = <LED_COLOR_ID_RED>;
-		};
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_INDICATOR;
+
+			led@0 {
+				led-cur = /bits/ 8 <0x20>;
+				max-cur = /bits/ 8 <0x60>;
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
 
-		led@1 {
-			chan-name = "G";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
+			led@1 {
+				led-cur = /bits/ 8 <0x20>;
+				max-cur = /bits/ 8 <0x60>;
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
 
-		led@2 {
-			chan-name = "B";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <2>;
-			color = <LED_COLOR_ID_BLUE>;
+			led@2 {
+				led-cur = /bits/ 8 <0x20>;
+				max-cur = /bits/ 8 <0x60>;
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts
index 5c2cd517589b..0a6b668428a3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts
@@ -21,6 +21,10 @@
 	status = "okay";
 };
 
+&beeper {
+	status = "okay";
+};
+
 &lcd_display {
 	status = "okay";
 };
@@ -37,6 +41,10 @@
 	status = "okay";
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
index 2f42c56c21f6..6e49e1ccf6fc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
@@ -26,6 +26,12 @@
 		status = "disabled";
 	};
 
+	beeper: beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm3 0 500000 0>;
+		status = "disabled";
+	};
+
 	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -272,28 +278,32 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		led@0 {
-			chan-name = "R";
-			led-cur = /bits/ 8 <0x6e>;
-			max-cur = /bits/ 8 <0xc8>;
-			reg = <0>;
-			color = <LED_COLOR_ID_RED>;
-		};
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_INDICATOR;
+
+			led@0 {
+				led-cur = /bits/ 8 <0x6e>;
+				max-cur = /bits/ 8 <0xc8>;
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
 
-		led@1 {
-			chan-name = "G";
-			led-cur = /bits/ 8 <0xbe>;
-			max-cur = /bits/ 8 <0xc8>;
-			reg = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
+			led@1 {
+				led-cur = /bits/ 8 <0xbe>;
+				max-cur = /bits/ 8 <0xc8>;
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
 
-		led@2 {
-			chan-name = "B";
-			led-cur = /bits/ 8 <0xbe>;
-			max-cur = /bits/ 8 <0xc8>;
-			reg = <2>;
-			color = <LED_COLOR_ID_BLUE>;
+			led@2 {
+				led-cur = /bits/ 8 <0xbe>;
+				max-cur = /bits/ 8 <0xc8>;
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
 		};
 	};
 
@@ -466,6 +476,13 @@
 		>;
 	};
 
+	pinctrl_sound: soundgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x1b0b0
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x8
+		>;
+	};
+
 	pinctrl_touch: touchgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
@@ -551,6 +568,12 @@
 	status = "disabled";
 };
 
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sound>;
+	status = "disabled";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
index e1077e2da5f4..1f2200f50059 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
@@ -36,15 +36,6 @@
 	status = "okay";
 };
 
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	/* PCIe Switch */
-	pcie-switch@58 {
-		compatible = "plx,pex8605";
-		reg = <0x58>;
-	};
-};
-
 &pcie {
 	vpcie-supply = <&reg_pcie_switch>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts
new file mode 100644
index 000000000000..908dab57fd87
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval-v1.2.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Apalis Evaluation Board v1.2";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts
new file mode 100644
index 000000000000..5463d4127382
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Apalis Evaluation Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts
new file mode 100644
index 000000000000..84eabf81ba84
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-ixora-v1.1.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board V1.1";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts
new file mode 100644
index 000000000000..d7cfab4de457
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-ixora-v1.2.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board V1.2";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts
new file mode 100644
index 000000000000..189b074e31ce
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-ixora.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
index d77472519086..53013b12c2ec 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
@@ -222,6 +222,8 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
index d3f14b4d3b51..929def2bb35e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
@@ -46,6 +46,7 @@
 	panel {
 		compatible = "dataimage,fg1001l0dsswmg01";
 		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lcd>;
 
 		port {
 			panel_in: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index c1ae7c47b442..1e2266a2368b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -94,7 +94,7 @@
 		mdio-gpio0 = &mdio0;
 	};
 
-	mdio0: mdio-gpio {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
 			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
@@ -160,7 +160,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: flash@0 {
+	m25_eeprom: eeprom@0 {
 		compatible = "atmel,at25";
 		spi-max-frequency = <10000000>;
 		size = <0x8000>;
@@ -195,6 +195,8 @@
 			mma8453: mma8453@1c {
 				compatible = "fsl,mma8453";
 				reg = <0x1c>;
+				vdd-supply = <&reg_3p3v>;
+				vddio-supply = <&reg_3p3v>;
 			};
 		};
 
@@ -211,6 +213,8 @@
 			mpl3115: mpl3115@60 {
 				compatible = "fsl,mpl3115";
 				reg = <0x60>;
+				vdd-supply = <&reg_3p3v>;
+				vddio-supply = <&reg_3p3v>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts
index 299106fbe51c..13245af8f74d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts
@@ -73,7 +73,7 @@
 		reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
 	};
 
-	reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
+	reg_pcie_power_on_gpio: regulator-pcie-power-on {
 		compatible = "regulator-fixed";
 		regulator-name = "regulator-pcie-power-on-gpio";
 		regulator-min-microvolt = <3300000>;
@@ -99,6 +99,34 @@
 		enable-active-high;
 	};
 
+	avdd_reg: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	hpvdd_reg: regulator-hpvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "hpvdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	dcvdd_reg: regulator-dcvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "dcvdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	dbvdd_reg: regulator-dbvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "dbvdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound-analog {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "On-board analog audio";
@@ -307,6 +335,10 @@
 		#sound-dai-cells = <0>;
 		compatible = "wlf,wm8731";
 		reg = <0x1a>;
+		AVDD-supply = <&avdd_reg>;
+		HPVDD-supply = <&hpvdd_reg>;
+		DCVDD-supply = <&dcvdd_reg>;
+		DBVDD-supply = <&dbvdd_reg>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
index 16658b76fc4e..059750270fc4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
@@ -1,38 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017
  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
index 4ab31f2217cd..4e448b4810f2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
@@ -1,38 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017
  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
index c5525b2c1dbd..cbe580dec182 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
@@ -236,9 +236,12 @@
 		vcc-supply = <&sw2_reg>;
 		vio-supply = <&sw2_reg>;
 
-		stmpe_gpio1: stmpe_gpio {
+		stmpe_gpio1: gpio {
 			#gpio-cells = <2>;
 			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
 		};
 	};
 
@@ -250,9 +253,12 @@
 		vcc-supply = <&sw2_reg>;
 		vio-supply = <&sw2_reg>;
 
-		stmpe_gpio2: stmpe_gpio {
+		stmpe_gpio2: gpio {
 			#gpio-cells = <2>;
 			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
 		};
 	};
 
@@ -266,7 +272,7 @@
 		reg = <0x4d>;
 	};
 
-	rtc: m41t62@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t62";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
index d2d0a82ea178..484a60892229 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: flash@0 {
+	m25_eeprom: eeprom@0 {
 		compatible = "atmel,at25256B", "atmel,at25";
 		spi-max-frequency = <20000000>;
 		size = <0x8000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts
index 78d941fef5df..c936180ed32a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts
@@ -55,6 +55,13 @@
 		reg = <0x10000000 0x40000000>;
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usbh1_vbus: regulator-usbhubreset {
 		compatible = "regulator-fixed";
 		regulator-name = "usbh1_vbus";
@@ -81,6 +88,7 @@
 
 	panel {
 		compatible = "sharp,lq101k1ly04";
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -124,7 +132,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>;
 	status = "okay";
 
-	eeprom: m95m02@1 {
+	eeprom: eeprom@1 {
 		compatible = "st,m95m02", "atmel,at25";
 		size = <262144>;
 		pagesize = <256>;
@@ -134,7 +142,7 @@
 	};
 
 	pb_rtc: rtc@3 {
-		compatible = "nxp,rtc-pcf2123";
+		compatible = "nxp,pcf2123";
 		spi-max-frequency = <2450000>;
 		spi-cs-high;
 		reg = <3>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
index c5c144879fa6..bf8fde9cb38d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
@@ -184,7 +184,7 @@
 		#gpio-cells = <2>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts
index 2c7feeef1b0e..44d1871ac666 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts
index e9c224cea752..22842f2ef685 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts
index 735f2bbf1439..c69fdd064e2f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts
index a182e4cb0e6e..a9a33eeb9712 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts
index ca1e2ae3341e..25a93cd4e5f5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
index 46e011a363e8..4c8ea4381559 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
@@ -171,7 +171,7 @@
 		reg = <0x51>;
 	};
 
-	rtc: pcf8523@68 {
+	rtc: rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts
index 02aca1e28ce3..1ad3bdcea4a3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts
@@ -16,6 +16,7 @@
 	panel {
 		compatible = "ampire,am-1280800n3tzqw-t00h";
 		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts
index 241811c52b62..9e1c64da0b30 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts
@@ -16,6 +16,7 @@
 	panel {
 		compatible = "koe,tx31d200vm0baa";
 		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
index c425d427663d..d6deb8c22b8c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
@@ -69,14 +69,14 @@
 		led-green {
 			label = "led1";
 			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 
 		led-red {
 			label = "led0";
 			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
index f08b37010291..ef5c0eda8b15 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
@@ -279,7 +279,7 @@
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0 0x02000000>;
 		#address-cells = <1>;
@@ -292,8 +292,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_backlight: dispgrp {
 		fsl,pins = <
 			/* BLEN_OUT */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
index 8c3a9ea8d5b3..24fc3ff1c70c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
@@ -265,7 +265,7 @@
 		reg = <0x1c>;
 	};
 
-	rtc: pcf8523@68 {
+	rtc: rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
@@ -288,7 +288,7 @@
 		vio-supply = <&reg_3p3v>;
 		vcc-supply = <&reg_3p3v>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts
index 56b77cc0af2b..b8567167779c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts
@@ -145,6 +145,7 @@
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
@@ -324,8 +325,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0  /*pcie power*/
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
index fb81bd8ba035..73ed40ae5a7b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
@@ -57,6 +57,7 @@
 	panel {
 		compatible = "kyo,tcg121xglp";
 		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -72,6 +73,13 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_wifi: regulator-wifi {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
index 5353a0c24420..3bd0e2c9e57a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
@@ -37,7 +37,7 @@
 				      3000 1>;
 	};
 
-	ir_recv {
+	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts
index 393bfec58e2f..d630c572c704 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts
index 4ee860b626ff..01ac3493fa32 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts
index 1ab175ffa238..1013025cb2d5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts
index 0a4daec8d3ad..5dd8f1642db3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts
index 9ffbb0fe7df8..ffa79c0eb05a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts
index cb2fcb4896c6..1346fd663d68 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts
index d43a5d8f1749..eac07d5944cc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts
index f7b0acb65352..c485da35d333 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts
index 387edf2b3f96..53304fc3a90b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
index aae81feee00d..c78f101c3cc1 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
@@ -326,11 +326,14 @@
 &pcie {
 	pcie@0,0 {
 		reg = <0x000000 0 0 0 0>;
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
+		bus-range = <0x00 0xff>;
+		ranges;
 
 		/* non-removable i211 ethernet card */
-		eth1: intel,i211@pcie0,0 {
+		eth1: ethernet@0,0 {
 			reg = <0x010000 0 0 0 0>;
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
index 18a620832a2a..a55644529c67 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "imx6q.dtsi"
 #include "imx6qdl-var-som.dtsi"
 #include <dt-bindings/pwm/pwm.h>
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts
index ec6651ba4ba2..7332f2718982 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts
@@ -17,6 +17,10 @@
 	};
 };
 
+&beeper {
+	status = "okay";
+};
+
 &gpio_oled {
 	status = "okay";
 };
@@ -37,6 +41,10 @@
 	status = "okay";
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &reg_pu {
 	regulator-always-on;
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi
new file mode 100644
index 000000000000..83fa04fc9f18
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+&i2c2 {
+	/delete-node/ stmpe811@41;
+
+	ad7879_ts: touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio4>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+
+	tla2024_adc: adc@49 {
+		compatible = "ti,tla2024";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Apalis AN1_ADC0 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Apalis AN1_ADC1 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Apalis AN1_ADC2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Apalis AN1_TSWIP_ADC3 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index 1c72da417011..5fcd7cdb7001 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -10,7 +10,6 @@
 
 / {
 	model = "Toradex Apalis iMX6Q/D Module";
-	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
 
 	aliases {
 		mmc0 = &usdhc3; /* eMMC */
@@ -108,6 +107,11 @@
 		};
 	};
 
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&vgen2_reg>;
+	};
+
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@@ -236,10 +240,6 @@
 	status = "disabled";
 };
 
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
 /* Apalis SPI1 */
 &ecspi1 {
 	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
@@ -527,7 +527,6 @@
 
 	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
-		fsl,pmic-stby-poweroff;
 		reg = <0x08>;
 
 		regulators {
@@ -649,7 +648,7 @@
 		/* ADC conversion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_ts: stmpe_touchscreen {
+		stmpe_ts: touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
@@ -664,10 +663,9 @@
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
-			status = "disabled";
 		};
 
-		stmpe_adc: stmpe_adc {
+		stmpe_adc: adc {
 			compatible = "st,stmpe-adc";
 			#io-channel-cells = <1>;
 			/* forbid to use ADC channels 3-0 (touch) */
@@ -691,7 +689,7 @@
 
 	adv_7280: adv7280@21 {
 		compatible = "adi,adv7280";
-		adv,force-bt656-4;
+		adi,force-bt656-4;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu1_csi0>;
 		reg = <0x21>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
index 7cc7ae195988..01d4ea20b13d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * support for the imx6 based aristainetos2 board
  *
  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/imx6qdl-clock.h>
@@ -150,6 +114,8 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <04 0x8>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
 
 		regulators {
 			bcore1 {
@@ -324,8 +290,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy: ethernet-phy {
+		ethphy: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
 			txd0-skew-ps = <0>;
 			txd1-skew-ps = <0>;
 			txd2-skew-ps = <0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi
new file mode 100644
index 000000000000..d11bf911b728
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+&i2c2 {
+	/delete-node/ stmpe811@41;
+
+	ad7879_ts: touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio6>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+
+	tla2024_adc: adc@49 {
+		compatible = "ti,tla2024";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Colibri AIN0 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Colibri AIN1 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Colibri AIN2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Colibri AIN3 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 9f33419c260b..8a0ce250e576 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -10,7 +10,6 @@
 
 / {
 	model = "Toradex Colibri iMX6DL/S Module";
-	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
 
 	aliases {
 		mmc0 = &usdhc3; /* eMMC */
@@ -573,7 +572,7 @@
 		/* ADC converstion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_ts: stmpe_touchscreen {
+		stmpe_ts: touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
@@ -588,10 +587,9 @@
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
-			status = "disabled";
 		};
 
-		stmpe_adc: stmpe_adc {
+		stmpe_adc: adc {
 			compatible = "st,stmpe-adc";
 			/* forbid to use ADC channels 3-0 (touch) */
 			st,norequest-mask = <0x0F>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
index 41d073f5bfe7..c504cf7e9492 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
@@ -118,7 +118,7 @@
 		pinctrl-0 = <&pinctrl_gpio_key>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			label = "Button 0";
 			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index 97763db3959f..9f4e746beb2d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -33,7 +33,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_emcon_wake>;
 
-		wake {
+		key-wake {
 			label = "Wake";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
@@ -225,6 +225,8 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
index e75e1a5364b8..beff5a0f58ab 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -156,6 +156,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -270,7 +271,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
index b57f4073f881..9d3ba4083216 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
@@ -33,13 +33,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -53,21 +53,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -230,6 +230,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -350,7 +351,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
index 090c0057d117..7e84e0a52ef3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
@@ -33,13 +33,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -53,21 +53,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -223,6 +223,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -349,7 +350,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
index 94f1d1ae59aa..81394d47dd68 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
@@ -34,13 +34,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -54,21 +54,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -376,7 +376,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
index 29960d1cf6a0..6136a95b9259 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -68,13 +26,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -88,21 +46,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -221,6 +179,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -329,7 +288,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
index 77ae611b817a..9c822ca23130 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
@@ -25,13 +25,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -45,21 +45,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -146,6 +146,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -260,7 +261,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
index c6e231de674a..552114a69f5b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -66,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -86,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -184,6 +142,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -298,7 +257,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
index d0f648938cae..e9d5bbb43145 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -92,13 +50,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -112,21 +70,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -296,6 +254,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -503,7 +462,6 @@
 				regulator-ramp-delay = <7000>;
 				regulator-boot-on;
 				regulator-always-on;
-				linux,phandle = <&reg_vdd_arm>;
 			};
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
index 71911df881cc..01f77142e153 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -76,13 +34,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -96,21 +54,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -237,6 +195,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -401,7 +360,6 @@
 				regulator-ramp-delay = <7000>;
 				regulator-boot-on;
 				regulator-always-on;
-				linux,phandle = <&reg_vdd_arm>;
 			};
 
 			/* VDD_SOC (1+R1/R2 = 1.635) */
@@ -413,7 +371,6 @@
 				regulator-ramp-delay = <7000>;
 				regulator-boot-on;
 				regulator-always-on;
-				linux,phandle = <&reg_vdd_soc>;
 			};
 
 			/* VDD_1P0 (1+R1/R2 = 1.38): */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
index 716c324a7458..3df4d345da98 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -78,13 +36,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -98,21 +56,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -302,6 +260,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
index 955a51226eda..87fdc9e2a727 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -156,6 +156,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -270,7 +271,7 @@
 		pagesize = <16>;
 	};
 
-	ds1672@68 {
+	rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
index 453dee4d9227..099ed2f94d61 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
@@ -27,13 +27,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -47,21 +47,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -165,6 +165,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
index add700bc11cc..cbca5e58e812 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
@@ -25,13 +25,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -45,21 +45,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
index 82f47c295b08..4e4dce5adc15 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -141,6 +141,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
index 54d4bced2395..6b737360a532 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
@@ -332,7 +332,6 @@
 };
 
 &pwm2 {
-	 pinctrl-names = "default";
 	 status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
index 8cefda70db63..ee2c6bec92e8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
@@ -124,7 +124,7 @@
 		compatible = "fsl,imx-audio-tlv320aic32x4";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_audmux>;
-		model = "imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&ssi1>;
 		audio-codec = <&tlv320aic32x4>;
 		audio-asrc = <&asrc>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
index 8ee65f9858c0..610b2a72fe82 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
@@ -57,13 +57,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
 			linux,code = <102>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
 			linux,code = <158>;
@@ -127,6 +127,7 @@
 	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in_lvds0: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
index 43d474bbf55d..ef0c26688446 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
@@ -86,45 +86,45 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
 
-	i2c2mux {
+	i2c-mux-2 {
 		compatible = "i2c-mux-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2mux>;
@@ -135,20 +135,20 @@
 		i2c-parent = <&i2c2>;
 		idle-state = <0>;
 
-		i2c2mux@1 {
+		i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		i2c2mux@2 {
+		i2c@2 {
 			reg = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 	};
 
-	i2c3mux {
+	i2c-mux-3 {
 		compatible = "i2c-mux-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3mux>;
@@ -158,7 +158,7 @@
 		i2c-parent = <&i2c3>;
 		idle-state = <0>;
 
-		i2c3mux@1 {
+		i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -237,6 +237,7 @@
 	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			lcd_panel_in: endpoint {
@@ -248,6 +249,7 @@
 	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in_lvds0: endpoint {
@@ -259,6 +261,7 @@
 	panel-lvds1 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in_lvds1: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
index 8e64314fa8b2..03fe053880ca 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
@@ -47,38 +47,38 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -114,6 +114,7 @@
 	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			lcd_panel_in: endpoint {
@@ -125,6 +126,7 @@
 	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in_lvds0: endpoint {
@@ -136,6 +138,7 @@
 	panel-lvds1 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in_lvds1: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
index 8a0bfc387a59..6a353a99e13d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
@@ -80,38 +80,38 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -179,6 +179,7 @@
 	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			lcd_panel_in: endpoint {
@@ -190,6 +191,7 @@
 	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
index 037b60197598..fc78acc9f5c5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
@@ -13,14 +13,14 @@
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 		status = "disabled";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
 			wakeup-source;
 		};
 
-		sleep {
+		key-sleep {
 			label = "Sleep Button";
 			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_SLEEP>;
@@ -35,19 +35,19 @@
 
 		user-led1 {
 			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		user-led2 {
 			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		user-led3 {
 			gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
index 0b4c09b09c03..a3c2811e9c6f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -162,7 +162,7 @@
 		interrupts = <12 IRQ_TYPE_NONE>;
 		status = "disabled";
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
index 64ded5e5559c..22d5918ee4d8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
@@ -23,7 +23,6 @@
 
 	reg_usbh1_vbus: regulator-usbh1-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
 		regulator-name = "usbh1_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -33,7 +32,6 @@
 
 	reg_usb_otg_vbus: regulator-otg-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
 		regulator-name = "usb_otg_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
index a381cb224c1e..b9dde0af3b99 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -32,35 +32,35 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			wakeup-source;
 		};
 
-		program {
+		key-program {
 			label = "Program";
 			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROGRAM>;
 			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -854,7 +854,7 @@
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "disabled"; /* pin conflict with SPI NOR */
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0 0x02000000>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
index bdef7e642d3c..3b7d01065e87 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 / {
 	chosen {
@@ -108,38 +109,38 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -207,6 +208,7 @@
 	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			lcd_panel_in: endpoint {
@@ -218,6 +220,7 @@
 	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
@@ -360,7 +363,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ov5642>;
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
 		reg = <0x42>;
 		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
@@ -370,6 +372,7 @@
 		port {
 			ov5642_to_ipu1_csi0_mux: endpoint {
 				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 				bus-width = <8>;
 				hsync-active = <1>;
 				vsync-active = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
index dc8298f6db34..ba29720e3f72 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 / {
 	chosen {
@@ -17,6 +18,13 @@
 		reg = <0x10000000 0x40000000>;
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usb_otg_vbus: regulator-usb-otg-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg_vbus";
@@ -71,21 +79,21 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 			linux,code = <KEY_POWER>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 			wakeup-source;
@@ -113,8 +121,8 @@
 			"DMICDAT", "DMIC";
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
-		mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		hp-det-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+		mic-det-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	};
 
 	backlight_lvds: backlight-lvds {
@@ -139,6 +147,7 @@
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -278,7 +287,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ov5642>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
 		reg = <0x3c>;
 		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
 		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
@@ -291,6 +299,7 @@
 		port {
 			ov5642_to_ipu1_csi0_mux: endpoint {
 				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 				bus-width = <8>;
 				hsync-active = <1>;
 				vsync-active = <1>;
@@ -804,6 +813,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;
+	dr_mode = "otg";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
index 6823a639ed2f..2daf2b6af884 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
@@ -58,7 +58,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
index 6ab71a729fd8..c93dbc595ef6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -69,7 +69,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
 			interrupt-parent = <&gpio3>;
-			interrupt = <30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
 			reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 			reg = <0>;
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
index 6152a9ed4768..07492f63a1f8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
@@ -7,16 +7,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-/ {
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "supply-3p3v";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
@@ -25,11 +15,16 @@
 
 	m25p80: flash@0 {
 		compatible = "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		vcc-supply = <&sw4_reg>;
 		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -119,7 +114,7 @@
 		};
 
 		sw4_reg: sw4 {
-			regulator-min-microvolt = <800000>;
+			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
@@ -183,7 +178,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&sw4_reg>;
 	non-removable;
 	disable-wp;
 	no-sd;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
index 828996382f24..e8fd37dd8835 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
@@ -30,14 +30,14 @@
 	temperature-sensor@48 {
 		compatible = "national,lm75a";
 		reg = <0x48>;
-		vs-supply = <&reg_3p3v>;
+		vs-supply = <&sw4_reg>;
 	};
 
 	eeprom@50 {
 		compatible = "st,24c64", "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
-		vcc-supply = <&reg_3p3v>;
+		vcc-supply = <&sw4_reg>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
index 1d0966b8d99e..0e404c1f62f2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
@@ -23,14 +23,14 @@
 	temperature-sensor@48 {
 		compatible = "national,lm75a";
 		reg = <0x48>;
-		vs-supply = <&reg_3p3v>;
+		vs-supply = <&sw4_reg>;
 	};
 
 	eeprom@50 {
 		compatible = "st,24c64", "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
-		vcc-supply = <&reg_3p3v>;
+		vcc-supply = <&sw4_reg>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi
index f88da757edda..948b612496a5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi
@@ -140,7 +140,7 @@
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <32>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
index 11c70431feec..17f6a568f0e8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
@@ -213,12 +213,12 @@
 	status = "okay";
 
 	m41t00s: rtc@68 {
-		compatible = "m41t00";
+		compatible = "st,m41t00";
 		reg = <0x68>;
 	};
 
 	isl12022: rtc@6f {
-		compatible = "isl,isl12022";
+		compatible = "isil,isl12022";
 		reg = <0x6f>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi
index 77594546ef37..cdeaca36867e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi
index 4eb53d5677a6..63d09c01a3c6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi
index bae7313d729d..8232f4ea2752 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
@@ -52,16 +16,19 @@
 
 	lcd-panel {
 		compatible = "edt,et057090dhu";
+		power-supply = <&reg_lcd1_pwr>;
 		pixelclk-active = <0>;
 	};
 
 	lvds0-panel {
 		compatible = "edt,etml1010g0dka";
+		power-supply = <&reg_lcd1_pwr>;
 		pixelclk-active = <0>;
 	};
 
 	lvds1-panel {
 		compatible = "edt,etml1010g0dka";
+		power-supply = <&reg_lcd1_pwr>;
 		pixelclk-active = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
index 2fa37d1b16cc..57297d6521cf 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -80,7 +44,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
index 2bff5f92242a..fef34ce961d5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
@@ -9,9 +9,6 @@
  * Copyright 2022 Bootlin
  */
 
-/dts-v1/;
-
-#include "imx6q.dtsi"
 #include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/sound/fsl-imx-audmux.h>
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
index 96e4f4b0b248..de2b12dad7d8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
@@ -429,7 +429,6 @@
 };
 
 &usbh1 {
-	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
 	disable-over-current;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index d2200c9db25a..45bcfd7faf9d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -711,8 +711,8 @@
 				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x120>;
 					anatop-vol-bit-shift = <8>;
@@ -806,6 +806,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -814,6 +815,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
index fbe260c9872e..cad985e341a1 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
@@ -384,7 +384,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts
index 92b38e6699aa..3183abdd25aa 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts
index ffc0f2ee11d2..174824a8138e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts
index 07ad70718aec..31854bc52e76 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts
index dd494d587014..dfe1535128fe 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts
index 4a961a33bf2d..770a85e0561c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts
@@ -17,6 +17,10 @@
 	};
 };
 
+&beeper {
+	status = "okay";
+};
+
 &gpio_oled {
 	status = "okay";
 };
@@ -37,6 +41,10 @@
 	status = "okay";
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &reg_pu {
 	regulator-always-on;
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
index 55cdfa7ea206..036705b783f4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
@@ -108,7 +108,7 @@
 			"IN3R", "AMIC";
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+		hp-det-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
 	};
 
 	panel {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
index 56040da0bd25..b6c336e3079e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -84,7 +84,7 @@
 		led-1 {
 			label = "tolinoshine2hd:white:backlightboost";
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
+			linux,default-trigger = "none";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts
index 2694fe18a91b..7cda1f21e418 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts
@@ -227,7 +227,6 @@
 };
 
 &usbotg1 {
-	pinctrl-names = "default";
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts
index a2534c422a52..f8709a952409 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts
@@ -26,6 +26,11 @@
 	compatible = "kobo,tolino-vision5", "fsl,imx6sl";
 };
 
+&epd_pmic_supply {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epd_pmic_supply>;
+};
+
 &gpio_keys {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio_keys>;
@@ -59,6 +64,12 @@
 		>;
 	};
 
+	pinctrl_epd_pmic_supply: epd-pmic-supplygrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14    0x40010059
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x17059	/* PWR_SW */
@@ -159,6 +170,14 @@
 		>;
 	};
 
+	pinctrl_sy7636_gpio: sy7636-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03        0x40010059 /* VCOM_CTRL */
+			MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08     0x40010059 /* EN */
+			MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13      0x17059 /* PWR_GOOD */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
@@ -329,6 +348,11 @@
 	pinctrl-0 = <&pinctrl_ricoh_gpio>;
 };
 
+&sy7636 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sy7636_gpio>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
index 941a2f185056..7381fb7f8912 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
@@ -546,8 +546,8 @@
 				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x120>;
 					anatop-vol-bit-shift = <8>;
@@ -640,6 +640,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -648,6 +649,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts
index 05d6827ea2af..814401486792 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts
@@ -157,7 +157,7 @@
 			"IN3R", "AMIC";
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		hp-det-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts
index 660620d226f7..19bbe60331b3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts
@@ -36,6 +36,11 @@
 	soc-supply = <&dcdc1_reg>;
 };
 
+&epd_pmic_supply {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epd_pmic_supply>;
+};
+
 &gpio_keys {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio_keys>;
@@ -69,6 +74,12 @@
 		>;
 	};
 
+	pinctrl_epd_pmic_supply: epd-pmic-supplygrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14    0x40010059
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25	0x17059	/* PWR_SW */
@@ -169,6 +180,14 @@
 		>;
 	};
 
+	pinctrl_sy7636_gpio: sy7636-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03       0x40010059 /* VCOM_CTRL */
+			MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08   0x40010059 /* EN */
+			MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13    0x17059 /* PWR_GOOD */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
@@ -319,6 +338,11 @@
 	pinctrl-0 = <&pinctrl_ricoh_gpio>;
 };
 
+&sy7636 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sy7636_gpio>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index 8c5ca4f9b87f..704870e8c10c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -309,7 +309,7 @@
 					reg = <0x02034000 0x4000>;
 					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
-					dma-name = "rx", "tx";
+					dma-names = "rx", "tx";
 					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
 						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
 					clock-names = "ipg", "per";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
index 1beac42c1a27..3e238d8118fa 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -33,14 +33,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -119,7 +119,7 @@
 		regulator-always-on;
 	};
 
-	reg_pcie_gpio: regulator-pcie-gpio {
+	reg_pcie_gpio: regulator-pcie {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pcie_reg>;
@@ -167,7 +167,7 @@
 			"IN3R", "AMIC";
 		mux-int-port = <2>;
 		mux-ext-port = <6>;
-		hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		hp-det-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 	};
 
 	panel {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
index a9550f115f82..5132b575b001 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -637,8 +637,8 @@
 				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x120>;
 					anatop-vol-bit-shift = <8>;
@@ -731,6 +731,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -739,6 +740,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index b74ee8948a78..3d147b160ecf 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -22,6 +22,33 @@
 		status = "okay";
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_2v8: regulator-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-fixed";
@@ -62,13 +89,40 @@
 		gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
 	};
 
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	sound-wm8960 {
 		compatible = "fsl,imx-audio-wm8960";
 		model = "wm8960-audio";
 		audio-cpu = <&sai2>;
 		audio-codec = <&codec>;
 		audio-asrc = <&asrc>;
-		hp-det-gpio = <&gpio5 4 0>;
+		hp-det-gpios = <&gpio5 4 0>;
 		audio-routing =
 			"Headphone Jack", "HP_L",
 			"Headphone Jack", "HP_R",
@@ -110,6 +164,7 @@
 	panel {
 		compatible = "innolux,at043tn24";
 		backlight = <&backlight_display>;
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -139,6 +194,11 @@
 		wlf,gpio-cfg = <1 3>;
 		clocks = <&clks IMX6UL_CLK_SAI2>;
 		clock-names = "mclk";
+		AVDD-supply = <&reg_audio_3v3>;
+		DBVDD-supply = <&reg_audio_1v8>;
+		DCVDD-supply = <&reg_audio_1v8>;
+		SPKVDD1-supply = <&reg_audio_5v>;
+		SPKVDD2-supply = <&reg_audio_5v>;
 	};
 
 	camera@3c {
@@ -150,6 +210,9 @@
 		clock-names = "xclk";
 		powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
 
 		port {
 			ov5640_to_parallel: endpoint {
@@ -389,8 +452,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_camera_clock: cameraclockgrp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
index f2386dcb9ff2..dda4fa91b2f2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
@@ -40,6 +40,9 @@
 			reg = <1>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
index 4c09bb312696..e34c8cbe36ae 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
@@ -122,15 +122,21 @@
 		VDDD-supply = <&reg_1p8v>;
 	};
 
-	stmpe811: gpio-expander@44 {
+	gpio-expander@44 {
 		compatible = "st,stmpe811";
 		reg = <0x44>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_stmpe>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
+
+		gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 
 		stmpe: touchscreen {
 			compatible = "st,stmpe-ts";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
index 29d2f86d5e34..f4c45e964daf 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
@@ -168,7 +168,6 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	linux,rs485-enabled-at-boot-time;
 	rs485-rx-during-tx;
-	rs485-rts-active-low;
 	uart-has-rtscts;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi
index dcf88f610346..4c0ac4d4df68 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi
@@ -26,8 +26,29 @@
 
 	flash@0 {
 		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
 		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0xf0000>;
+				label = "u-boot";
+			};
+
+			partition@f0000 {
+				reg = <0xf0000 0x8000>;
+				label = "env";
+			};
+
+			partition@f8000 {
+				reg = <0xf8000 0x8000>;
+				label = "env_redundant";
+			};
+		};
 	};
 };
 
@@ -61,7 +82,7 @@
 	pinctrl-0 = <&pinctrl_qspi>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spi-nand";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
index ec042648bd98..c6064f4c679b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -61,7 +61,7 @@
 		wakeup-source;
 		status = "disabled";
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
index 2f3fd32a1167..113485e3397a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -8,12 +8,12 @@
 
 / {
 	gpio_keys: gpio-keys {
-		compatible = "gpio-key";
+		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 		status = "disabled";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -29,13 +29,13 @@
 
 		user-led1 {
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		user-led2 {
 			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts
index fb206c1d8aca..fbab126f95b9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts
@@ -49,5 +49,7 @@
 	pressure-sensor@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
+		vdd-supply = <&reg_3p3v>;
+		vddio-supply = <&reg_3p3v>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
index fe307f49b9e5..9fa5225994e3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
@@ -76,6 +76,7 @@
 	panel {
 		compatible = "vxt,vl050-8048nt-c01";
 		backlight = <&backlight>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi
index c9c0794f01a2..2dd635a615cb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi
@@ -162,13 +162,18 @@
 	status = "okay";
 
 	flash0: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-max-frequency = <33000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
-		reg = <0>;
+		vcc-supply = <&reg_vldo4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts
index f2a5f17f312e..2e7b96e7b791 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts
@@ -6,8 +6,9 @@
 
 /dts-v1/;
 
-#include "imx6ul-tqma6ul1.dtsi"
+#include "imx6ul-tqma6ul2.dtsi"
 #include "mba6ulx.dtsi"
+#include "imx6ul-tqma6ul1.dtsi"
 
 / {
 	model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi
index 24192d012ef7..79c8c5529135 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi
@@ -4,8 +4,6 @@
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
-#include "imx6ul-tqma6ul2.dtsi"
-
 / {
 	model = "TQ-Systems TQMa6UL1 SoM";
 	compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts
index 8c2f3df79b47..188f3a2a312f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts
index d82698e7d50f..247a0aab7791 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts
index 20c810a81403..84b45542814e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
index 278120404d31..1992dfb53b45 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -108,7 +72,7 @@
 		default-brightness-level = <50>;
 	};
 
-	i2c_gpio: i2c-gpio {
+	i2c_gpio: i2c {
 		compatible = "i2c-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -282,7 +246,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy0>;
 	status = "okay";
@@ -298,6 +261,11 @@
 			pinctrl-0 = <&pinctrl_etnphy0_int>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100>;
+			reset-deassert-us = <25000>;
+			/* Energy detect sometimes causes link failures */
+			smsc,disable-energy-detect;
 			status = "okay";
 		};
 
@@ -308,6 +276,9 @@
 			pinctrl-0 = <&pinctrl_etnphy1_int>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100>;
+			reset-deassert-us = <25000>;
 			status = "okay";
 		};
 	};
@@ -317,7 +288,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy1>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
new file mode 100644
index 000000000000..9ff3b374a2b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-MX6UL
+ * Variscite SoM mounted on it
+ *
+ * Copyright 2019 Variscite Ltd.
+ * Copyright 2025 Bootlin
+ */
+
+#include "imx6ul-var-som.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Variscite VAR-SOM-MX6UL Concerto Board";
+	compatible = "variscite,mx6ulconcerto", "variscite,var-som-imx6ul", "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_key_back>, <&pinctrl_gpio_key_wakeup>;
+
+		key-back {
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-wakeup {
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "gpled2";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&fec1 {
+	status = "disabled";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_gpio>, <&pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			clocks = <&rmii_ref_clk>;
+			clock-names = "rmii-ref";
+			reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100000>;
+			micrel,led-mode = <0>;
+			micrel,rmii-reference-clock-select-25-mhz = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@68 {
+		/*
+		 * To actually use this interrupt
+		 * connect pins J14.8 & J14.10 on the Concerto-Board.
+		 */
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2_gpio: enet2-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0 /* fec2 reset */
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio_key_back: gpio-key-backgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x17059
+		>;
+	};
+
+	pinctrl_gpio_leds: gpio-ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x1b0b0	/* GPLED2 */
+		>;
+	};
+
+	pinctrl_gpio_key_wakeup: gpio-keys-wakeupgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0 /* RTC alarm IRQ */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x1b0b1 /* CD */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B	0x78b0
+		>;
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&tsc {
+	/*
+	 * Conflics with wdog1 ext-reset-output & SD CD pins,
+	 * so we keep it disabled by default.
+	 */
+	status = "disabled";
+};
+
+/* Console UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* ttymxc4 UART */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	/*
+	 * To actually use ext-reset-output
+	 * connect pins J17.3 & J17.8 on the Concerto-Board
+	 */
+	fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
new file mode 100644
index 000000000000..4e536e0252de
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite VAR-SOM-MX6UL Module
+ *
+ * Copyright 2019 Variscite Ltd.
+ * Copyright 2025 Bootlin
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Variscite VAR-SOM-MX6UL module";
+	compatible = "variscite,var-som-imx6ul", "fsl,imx6ul";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_gpio_dvfs: reg-gpio-dvfs {
+		compatible = "regulator-gpio";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-name = "gpio_dvfs";
+		regulator-type = "voltage";
+		gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		states = <1300000 0x1
+			  1400000 0x0>;
+	};
+
+	rmii_ref_clk: rmii-ref-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "rmii-ref";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&cpu0 {
+	dc-supply = <&reg_gpio_dvfs>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_gpio>, <&pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			clocks = <&rmii_ref_clk>;
+			clock-names = "rmii-ref";
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100000>;
+			micrel,led-mode = <1>;
+			micrel,rmii-reference-clock-select-25-mhz = <1>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet1_gpio: enet1-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* fec1 reset */
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* BT Enable */
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x03029	/* WLAN Enable */
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
+
+&pxp {
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
index 6de224dd2bb9..6eb80f867f50 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
@@ -339,7 +339,7 @@
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 					reg = <0x02030000 0x4000>;
-					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
 						 <&clks IMX6UL_CLK_SAI3>,
 						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
index de4dc7c1a03a..e75dad0f0e23 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
@@ -13,7 +13,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
 
-		power {
+		key-power {
 			label = "Wake-Up";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
index f52f8b5ad8a6..bce6fbf230b3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
@@ -13,7 +13,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
 
-		power {
+		key-power {
 			label = "Wake-Up";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
index b29713831a74..04e570d76e42 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
@@ -199,7 +199,7 @@
 		reg = <0x38>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		power-supply = <&reg_panel_3v3>;
+		vcc-supply = <&reg_panel_3v3>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts
new file mode 100644
index 000000000000..279d46c22cd7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull-bmm",
+		     "engicam,microgea-imx6ull", "fsl,imx6ull";
+	model = "Engicam MicroGEA i.MX6ULL BMM Board";
+
+	backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <85>;
+		pwms = <&pwm8 0 100000 0>;
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 1000000 0>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ext_pwr: regulator-ext-pwr {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_ext_pwr>;
+		regulator-name = "ext-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6ull-microgea-bmm-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	codec: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_CKO>;
+		assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>,
+				  <&clks IMX6UL_CLK_CKO2_PODF>,
+				  <&clks IMX6UL_CLK_CKO2>,
+				  <&clks IMX6UL_CLK_CKO>;
+		assigned-clock-parents = <&clks IMX6UL_CLK_OSC>,
+					 <&clks IMX6UL_CLK_CKO2_SEL>,
+					 <&clks IMX6UL_CLK_CKO2_PODF>,
+					 <&clks IMX6UL_CLK_CKO2>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	measure-delay-time = <0x9ffff>;
+	pre-charge-time = <0xfff>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can: can-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL		0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_mclk: mclkgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x13009
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x11008
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x000b0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x000b0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x000b0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x000b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb2grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_reg_ext_pwr: reg-ext-pwrgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts
new file mode 100644
index 000000000000..d500f8839102
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull-gtw",
+		     "engicam,microgea-imx6ull", "fsl,imx6ull";
+	model = "Engicam MicroGEA i.MX6ULL GTW Board";
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>, <&pinctrl_pwrled>;
+
+		led-0 {
+			gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x0b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x130b0
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x130b0
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x130b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_pwrled: ledsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x130b0
+		>;
+	};
+
+	pinctrl_usb_hub: usb_hubgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
new file mode 100644
index 000000000000..540642e99a41
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull-rmm",
+		     "engicam,microgea-imx6ull", "fsl,imx6ull";
+	model = "Engicam MicroGEA i.MX6ULL BMM Board";
+
+	backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <85>;
+		pwms = <&pwm8 0 100000 0>;
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 1000000 0>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ext_pwr: regulator-ext-pwr {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_ext_pwr>;
+		regulator-name = "ext-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6ull-microgea-rmm-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			status = "okay";
+		};
+
+		led-1 {
+			gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			status = "okay";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen: touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+		report-rate-hz = <60>;
+		/* settings valid only for Hycon touchscreen */
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	codec: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_CKO>;
+		assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>,
+				  <&clks IMX6UL_CLK_CKO2_PODF>,
+				  <&clks IMX6UL_CLK_CKO2>,
+				  <&clks IMX6UL_CLK_CKO>;
+		assigned-clock-parents = <&clks IMX6UL_CLK_OSC>,
+					 <&clks IMX6UL_CLK_CKO2_SEL>,
+					 <&clks IMX6UL_CLK_CKO2_PODF>,
+					 <&clks IMX6UL_CLK_CKO2>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can: can-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL		0x4001b8b0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x130b0
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x130b0
+		>;
+	};
+
+	pinctrl_mclk: mclkgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x13009
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_touchscreen: touchgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x17059
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb2grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_reg_ext_pwr: reg-ext-pwrgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi
new file mode 100644
index 000000000000..43518bf07602
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+ #include "imx6ull.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull", "fsl,imx6ull";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_phy_reset>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
+};
+
+/* NAND */
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-ecc-mode = "hw";
+	nand-ecc-strength = <0>;
+	nand-ecc-step-size = <0>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b009
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_phy_reset: phy-resetgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
index d12fb44aeb14..6fd68970c0b4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -15,7 +15,7 @@
 	};
 
 	gpio_keys: gpio-keys {
-		compatible = "gpio-key";
+		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
@@ -79,13 +79,13 @@
 		user-led1 {
 			label = "yellow";
 			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
+			linux,default-trigger = "none";
 		};
 
 		user-led2 {
 			label = "red";
 			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
+			linux,default-trigger = "none";
 		};
 	};
 };
@@ -126,7 +126,7 @@
 	s25fl064: flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = " jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		reg = <2>;
 		spi-max-frequency = <40000000>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
index 6159ed70d966..2d9f495660c9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&uart2 {
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
index e1c401f468e1..4d948a9757f9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
@@ -87,34 +87,6 @@
 			      <&adc2 0>, <&adc2 1>, <&adc2 2>, <&adc2 3>;
 	};
 
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3_SD1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_fec1_pwdn: regulator-fec1-pwdn {
-		compatible = "regulator-fixed";
-		regulator-name = "PWDN_FEC1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_fec2_pwdn: regulator-fec2-pwdn {
-		compatible = "regulator-fixed";
-		regulator-name = "PWDN_FEC2";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS_USBOTG1";
@@ -141,6 +113,7 @@
 		gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
+		vin-supply = <&reg_mba_5v>;
 	};
 
 	reg_mpcie_3v3: regulator-mpcie-3v3 {
@@ -151,6 +124,7 @@
 		gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
+		vin-supply = <&reg_mba_3v3>;
 	};
 
 	reg_mba_12v0: regulator-mba-12v0 {
@@ -162,13 +136,18 @@
 		enable-active-high;
 	};
 
-	reg_lvds_transmitter: regulator-lvds-transmitter {
+	reg_mba_5v: regulator-mba-5v {
 		compatible = "regulator-fixed";
-		regulator-name = "#SHTDN_LVDS";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_mba_3v3: regulator-mba-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
 	};
 
 	reg_vref_1v8: regulator-vref-1v8 {
@@ -186,19 +165,12 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
-	};
-
-	reg_vcc_3v3: regulator-vcc-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
+		vin-supply = <&reg_mba_3v3>;
 	};
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&sai1>;
 		audio-codec = <&tlv320aic32x4>;
 		audio-routing =
@@ -239,7 +211,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rgmii-id";
-	phy-supply = <&reg_fec1_pwdn>;
 	phy-handle = <&ethphy1_0>;
 	fsl,magic-packet;
 	status = "okay";
@@ -260,6 +231,8 @@
 			reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <500>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		};
 	};
 };
@@ -318,7 +291,7 @@
 	lm75: temperature-sensor@49 {
 		compatible = "national,lm75a";
 		reg = <0x49>;
-		vs-supply = <&reg_vcc_3v3>;
+		vs-supply = <&reg_mba_3v3>;
 	};
 };
 
@@ -351,7 +324,7 @@
 		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		vcc-supply = <&reg_vcc_3v3>;
+		vcc-supply = <&reg_mba_3v3>;
 	};
 };
 
@@ -668,7 +641,7 @@
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_sd1_vmmc>;
+	vmmc-supply = <&reg_mba_3v3>;
 	bus-width = <4>;
 	no-1-8-v;
 	no-sdio;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index 028961eb7108..2966a33bc528 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -135,6 +135,7 @@
 	lm75a: temperature-sensor@48 {
 		compatible = "national,lm75a";
 		reg = <0x48>;
+		vs-supply = <&vgen4_reg>;
 	};
 
 	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
@@ -150,7 +151,6 @@
 		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&vgen4_reg>;
-		status = "okay";
 	};
 
 	at24c02: eeprom@56 {
@@ -158,7 +158,6 @@
 		reg = <0x56>;
 		pagesize = <16>;
 		vcc-supply = <&vgen4_reg>;
-		status = "okay";
 	};
 
 	ds1339: rtc@68 {
@@ -266,6 +265,13 @@
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&vgen4_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
index 0443faa3dfae..e3ee16f1aaa9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
@@ -21,7 +21,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rgmii-id";
-	phy-supply = <&reg_fec2_pwdn>;
 	phy-handle = <&ethphy2_0>;
 	fsl,magic-packet;
 	status = "okay";
@@ -42,6 +41,8 @@
 			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <500>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
index 7ee66be8bccb..2192f105ec81 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
@@ -35,6 +35,7 @@
 	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -61,6 +62,13 @@
 		enable-active-high;
 	};
 
+	reg_3v3: regulator-3v3 {
+		  compatible = "regulator-fixed";
+		  regulator-name = "reg-3v3";
+		  regulator-min-microvolt = <3300000>;
+		  regulator-max-microvolt = <3300000>;
+	 };
+
 	reg_can2_3v3: regulator-can2-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "can2-3v3";
@@ -270,7 +278,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	touch@48 {
+	touchscreen@48 {
 		compatible = "ti,tsc2004";
 		reg = <0x48>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 1b965652291b..347dd0fe4f82 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -49,6 +49,8 @@
 	pressure-sensor@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
+		vdd-supply = <&reg_3p3v>;
+		vddio-supply = <&reg_3p3v>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
index eec526a96311..ff9d50942884 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
@@ -374,7 +374,7 @@
 	cap-power-off-card;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
index f712537fca16..a370e868cafe 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
@@ -143,6 +143,33 @@
 		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	};
 
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000 0>;
@@ -169,7 +196,7 @@
 		model = "wm8960-audio";
 		audio-cpu = <&sai1>;
 		audio-codec = <&codec>;
-		hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+		hp-det-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
 		audio-routing =
 			"Headphone Jack", "HP_L",
 			"Headphone Jack", "HP_R",
@@ -379,6 +406,8 @@
 	mpl3115@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
+		vdd-supply = <&reg_audio_3v3>;
+		vddio-supply = <&reg_audio_3v3>;
 	};
 };
 
@@ -406,6 +435,11 @@
 				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
 		assigned-clock-rates = <0>, <884736000>, <12288000>;
+		AVDD-supply = <&reg_audio_3v3>;
+		DBVDD-supply = <&reg_audio_1v8>;
+		DCVDD-supply = <&reg_audio_1v8>;
+		SPKVDD1-supply = <&reg_audio_5v>;
+		SPKVDD2-supply = <&reg_audio_5v>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
index 0484e349e064..d961c61a93af 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
@@ -48,7 +48,7 @@
 
 		opp-792000000 {
 			opp-hz = /bits/ 64 <792000000>;
-			opp-microvolt = <1000000>;
+			opp-microvolt = <1000000 950000 1250000>;
 			clock-latency-ns = <150000>;
 			opp-supported-hw = <0xd>, <0x7>;
 			opp-suspend;
@@ -56,7 +56,7 @@
 
 		opp-996000000 {
 			opp-hz = /bits/ 64 <996000000>;
-			opp-microvolt = <1100000>;
+			opp-microvolt = <1100000 1045000 1250000>;
 			clock-latency-ns = <150000>;
 			opp-supported-hw = <0xc>, <0x7>;
 			opp-suspend;
@@ -64,7 +64,7 @@
 
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1225000>;
+			opp-microvolt = <1225000 1200000 1250000>;
 			clock-latency-ns = <150000>;
 			opp-supported-hw = <0x8>, <0x3>;
 			opp-suspend;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
index af4acc311572..92b6258059ee 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
@@ -23,7 +23,7 @@
 		pinctrl-0 = <&pinctrl_gpio>;
 		autorepeat;
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_BACK>;
@@ -31,28 +31,11 @@
 		};
 	};
 
-	reg_brcm: regulator-brcm {
+	reg_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	reg_bt: regulator-bt {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bt_reg>;
-		enable-active-high;
-		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		regulator-name = "bt_reg";
+		regulator-name = "3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
 	};
 
 	reg_peri_3p15v: regulator-peri-3p15v {
@@ -63,6 +46,14 @@
 		regulator-always-on;
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "imx7-sgtl5000";
@@ -244,6 +235,8 @@
 	mpl3115@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
+		vdd-supply = <&reg_3v3>;
+		vddio-supply = <&reg_3v3>;
 	};
 };
 
@@ -288,6 +281,14 @@
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
 	uart-has-rtscts;
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		shutdown-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+	};
 };
 
 &uart6 {
@@ -305,14 +306,21 @@
 };
 
 &usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
 	keep-power-in-suspend;
 	no-1-8-v;
 	non-removable;
-	vmmc-supply = <&reg_brcm>;
+	mmc-pwrseq = <&sdio_pwrseq>;
 	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
 };
 
 &usdhc3 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index 22dd72499ef2..9235dd7e93bb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -73,7 +73,6 @@
 			device_type = "cpu";
 			reg = <0>;
 			clock-frequency = <792000000>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
 			cpu-idle-states = <&cpu_sleep_wait>;
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -176,6 +175,34 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	video_mux: csi-mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			csi_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_csi_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			csi_mux_to_csi: endpoint {
+				remote-endpoint = <&csi_from_csi_mux>;
+			};
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -529,34 +556,6 @@
 					#mux-control-cells = <1>;
 					mux-reg-masks = <0x14 0x00000010>;
 				};
-
-				video_mux: csi-mux {
-					compatible = "video-mux";
-					mux-controls = <&mux 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					status = "disabled";
-
-					port@0 {
-						reg = <0>;
-					};
-
-					port@1 {
-						reg = <1>;
-
-						csi_mux_from_mipi_vc0: endpoint {
-							remote-endpoint = <&mipi_vc0_to_csi_mux>;
-						};
-					};
-
-					port@2 {
-						reg = <2>;
-
-						csi_mux_to_csi: endpoint {
-							remote-endpoint = <&csi_from_csi_mux>;
-						};
-					};
-				};
 			};
 
 			ocotp: efuse@30350000 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts
index eff51e113db4..88d7dc005fa0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts
@@ -92,7 +92,6 @@
 			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
 			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
 		>;
-		bias-pull-up;
 	};
 
 	pinctrl_pwm0: pwm0grp {
diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
index 3c6ef7bfba60..880b9a4f32b0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
@@ -399,6 +399,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLC>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 0 20>;
+			ngpios = <20>;
 		};
 
 		gpio_ptd: gpio@40af0000 {
@@ -413,6 +414,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLD>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 32 12>;
+			ngpios = <12>;
 		};
 
 		gpio_pte: gpio@40b00000 {
@@ -427,6 +429,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLE>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 64 16>;
+			ngpios = <16>;
 		};
 
 		gpio_ptf: gpio@40b10000 {
@@ -441,6 +444,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLF>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 96 20>;
+			ngpios = <20>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi b/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
index dd714d235d5f..b0bad0d1ba36 100644
--- a/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
@@ -87,7 +87,7 @@
 			reg = <0x402c0000 0x4000>;
 			interrupts = <110>;
 			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
-				<&clks IMXRT1050_CLK_OSC>,
+				<&clks IMXRT1050_CLK_AHB_PODF>,
 				<&clks IMXRT1050_CLK_USDHC1>;
 			clock-names = "ipg", "ahb", "per";
 			bus-width = <4>;
diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
index 941d9860218e..65fde4f52587 100644
--- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -142,10 +142,17 @@
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&sai1>;
 		audio-codec = <&tlv320aic32x4>;
 		audio-asrc = <&asrc>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
index 6dd73290f0c6..152e98cf0c4e 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
@@ -100,23 +100,25 @@
 			memcpy-bus-width = <32>;
 		};
 
-		spifi: flash-controller@40003000 {
+		spifi: spi@40003000 {
 			compatible = "nxp,lpc1773-spifi";
 			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
 			reg-names = "spifi", "flash";
 			interrupts = <30>;
 			clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
 			clock-names = "spifi", "reg";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			resets = <&rgu 53>;
 			status = "disabled";
 		};
 
-		mmcsd: mmcsd@40004000 {
+		mmcsd: mmc@40004000 {
 			compatible = "snps,dw-mshc";
 			reg = <0x40004000 0x1000>;
 			interrupts = <6>;
-			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
-			clock-names = "ciu", "biu";
+			clocks = <&ccu1 CLK_CPU_SDIO>, <&ccu2 CLK_SDIO>;
+			clock-names = "biu", "ciu";
 			resets = <&rgu 20>;
 			status = "disabled";
 		};
@@ -535,3 +537,7 @@
 		};
 	};
 };
+
+&nvic {
+	arm,num-irq-priority-bits = <3>;
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
index 974410918f35..2236901a0031 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
@@ -77,12 +77,13 @@
 			status = "disabled";
 		};
 
-		dma: dma@31000000 {
+		dma: dma-controller@31000000 {
 			compatible = "arm,pl080", "arm,primecell";
 			reg = <0x31000000 0x1000>;
 			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_DMA>;
 			clock-names = "apb_pclk";
+			#dma-cells = <2>;
 		};
 
 		usb {
@@ -94,7 +95,7 @@
 			/*
 			 * Enable either ohci or usbd (gadget)!
 			 */
-			ohci: ohci@0 {
+			ohci: usb@0 {
 				compatible = "nxp,ohci-nxp", "usb-ohci";
 				reg = <0x0 0x300>;
 				interrupt-parent = <&sic1>;
@@ -224,8 +225,8 @@
 				status = "disabled";
 			};
 
-			sd: sd@20098000 {
-				compatible = "arm,pl18x", "arm,primecell";
+			sd: mmc@20098000 {
+				compatible = "arm,pl180", "arm,primecell";
 				reg = <0x20098000 0x1000>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
 					     <13 IRQ_TYPE_LEVEL_HIGH>;
@@ -298,11 +299,11 @@
 				clocks = <&clk LPC32XX_CLK_I2C2>;
 			};
 
-			mpwm: mpwm@400e8000 {
+			mpwm: pwm@400e8000 {
 				compatible = "nxp,lpc3220-motor-pwm";
 				reg = <0x400e8000 0x78>;
+				#pwm-cells = <3>;
 				status = "disabled";
-				#pwm-cells = <2>;
 			};
 		};
 
@@ -481,6 +482,7 @@
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005c000 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM1>;
+				#pwm-cells = <3>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
@@ -490,6 +492,7 @@
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005c004 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM2>;
+				#pwm-cells = <3>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
index beddaba85393..5ff43c825944 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
@@ -108,14 +108,14 @@
 	};
 
 	ssp_pins: ssp-pins {
-		ssp1_cs {
+		ssp1_cs_cfg {
 			pins = "p6_7";
 			function = "gpio";
 			bias-pull-up;
 			bias-disable;
 		};
 
-		ssp1_miso_mosi {
+		ssp1_miso_mosi_cfg {
 			pins = "p1_3", "p1_4";
 			function = "ssp1";
 			slew-rate = <1>;
@@ -124,7 +124,7 @@
 			input-schmitt-disable;
 		};
 
-		ssp1_sck {
+		ssp1_sck_cfg {
 			pins = "pf_4";
 			function = "ssp1";
 			slew-rate = <1>;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
index 93d0c2e99e7c..18f757c56905 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
@@ -43,50 +43,50 @@
 		poll-interval = <100>;
 		autorepeat;
 
-		button0 {
+		button-0 {
 			label = "joy:right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
 		};
 
-		button1 {
+		button-1 {
 			label = "joy:up";
 			linux,code = <KEY_UP>;
 			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
 		};
 
 
-		button2 {
+		button-2 {
 			label = "joy:enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
 		};
 
-		button3 {
+		button-3 {
 			label = "joy:left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
 		};
 
-		button4 {
+		button-4 {
 			label = "joy:down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
 		};
 
-		button5 {
+		button-5 {
 			label = "user:sw3";
 			linux,code = <KEY_F1>;
 			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
 		};
 
-		button6 {
+		button-6 {
 			label = "user:sw4";
 			linux,code = <KEY_F2>;
 			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
 		};
 
-		button7 {
+		button-7 {
 			label = "user:sw5";
 			linux,code = <KEY_F3>;
 			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
@@ -406,6 +406,9 @@
 		ext_sram: sram@2,0 {
 			compatible = "mmio-sram";
 			reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 2 0 0x80000>;
 		};
 	};
 };
@@ -451,8 +454,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spifi_pins>;
 
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-rx-bus-width = <4>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
index c4422f587055..707d22a219d8 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
@@ -24,16 +24,25 @@
 		sram0: sram@10000000 {
 			compatible = "mmio-sram";
 			reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram1: sram@10080000 {
 			compatible = "mmio-sram";
 			reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram2: sram@20000000 {
 			compatible = "mmio-sram";
 			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
index 4aefbc01dfc0..7ccb4c2ca571 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
@@ -60,31 +60,31 @@
 		poll-interval = <100>;
 		autorepeat;
 
-		button0 {
+		button-0 {
 			label = "joy_enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
 		};
 
-		button1 {
+		button-1 {
 			label = "joy_left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
 		};
 
-		button2 {
+		button-2 {
 			label = "joy_up";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
 		};
 
-		button3 {
+		button-3 {
 			label = "joy_right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
 		};
 
-		button4 {
+		button-4 {
 			label = "joy_down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
@@ -403,7 +403,7 @@
 	};
 
 	ssp0_pins: ssp0-pins {
-		ssp0_sck_miso_mosi {
+		ssp0_sck_miso_mosi_cfg {
 			pins = "pf_0", "pf_2", "pf_3";
 			function = "ssp0";
 			slew-rate = <1>;
@@ -412,7 +412,7 @@
 			input-schmitt-disable;
 		};
 
-		ssp0_ssel {
+		ssp0_ssel_cfg {
 			pins = "pf_1";
 			function = "ssp0";
 			bias-pull-up;
@@ -452,12 +452,12 @@
 	};
 
 	usb0_pins: usb0-pins {
-		usb0_pwr_enable {
+		usb0_pwr_enable_cfg {
 			pins = "p2_3";
 			function = "usb0";
 		};
 
-		usb0_pwr_fault {
+		usb0_pwr_fault_cfg {
 			pins = "p8_0";
 			function = "usb0";
 			bias-disable;
@@ -582,8 +582,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spifi_pins>;
 
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-cpol;
 		spi-cpha;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
index 846afb8ccbf1..d18f2b2caf68 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
@@ -63,6 +63,7 @@
 
 	panel: panel {
 		compatible = "innolux,at070tn92";
+		power-supply = <&vcc>;
 
 		port {
 			panel_input: endpoint {
@@ -543,7 +544,7 @@
 	pinctrl-0 = <&enet_rmii_pins>;
 	phy-handle = <&phy1>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -569,8 +570,9 @@
 	pinctrl-0 = <&spifi_pins>;
 
 	/* Atmel AT25DF321A */
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-max-frequency = <51000000>;
 		spi-cpol;
 		spi-cpha;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
index 72f12db8d53a..d138ee7869ff 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
@@ -24,16 +24,25 @@
 		sram0: sram@10000000 {
 			compatible = "mmio-sram";
 			reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram1: sram@10080000 {
 			compatible = "mmio-sram";
 			reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram2: sram@20000000 {
 			compatible = "mmio-sram";
 			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/ls/Makefile b/arch/arm/boot/dts/nxp/ls/Makefile
index 14759331dba2..53240b04c968 100644
--- a/arch/arm/boot/dts/nxp/ls/Makefile
+++ b/arch/arm/boot/dts/nxp/ls/Makefile
@@ -6,3 +6,12 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-tqmls1021a-mbls1021a.dtb \
 	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
+
+ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
+ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
+ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtbo
+ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtbo
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtb
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
index f1acb97aee69..a880875ced83 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
@@ -66,7 +66,7 @@
 	bus-num = <0>;
 	status = "okay";
 
-	dspiflash: at45db021d@0 {
+	dspiflash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
@@ -187,7 +187,7 @@
 		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
@@ -211,8 +211,8 @@
 		device-width = <1>;
 		ranges = <0 3 0 0x100>;
 
-		mdio-mux-emi1 {
-			compatible = "mdio-mux-mmioreg";
+		mdio-mux@54 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
 			mdio-parent-bus = <&mdio0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
new file mode 100644
index 000000000000..e713a2ecbfc2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&sii9022a_in>;
+		};
+	};
+};
+
+&hdmi_out {
+	status = "okay";
+};
+
+&sii9022a {
+	status = "okay";
+};
+
+&sii9022a_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000000..e9708f3c6740
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&lvds_encoder_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
+
+&lvds_encoder {
+	status = "okay";
+};
+
+&lvds_encoder_in {
+	remote-endpoint = <&dcu_out>;
+};
+
+&lvds_encoder_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&panel_in {
+	remote-endpoint = <&lvds_encoder_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
new file mode 100644
index 000000000000..66cedc2dcd96
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070swv29hg-dc44";
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&panel_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
new file mode 100644
index 000000000000..8b9455bffbd2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070pws19hp-fc21";
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&panel_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
index 34636fcdfd6a..5606585dd560 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
@@ -147,6 +147,7 @@
 	display: panel {
 		backlight = <&backlight_dcu>;
 		enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3p3v>;
 		status = "disabled";
 
 		port {
@@ -156,7 +157,7 @@
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "ls1021a-mbls1021a-tlv320aic32";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&sai1>;
 		audio-codec = <&tlv320aic32x4>;
 	};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
index 1b13851ad997..167559521ae1 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
@@ -66,12 +66,11 @@
 
 	qflash0: flash@0 {
 		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <20000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		reg = <0>;
+		vcc-supply = <&reg_3p3v_som>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
index 1ea32fff4120..da76566f3510 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
@@ -40,8 +40,6 @@
 	/* ADG704BRMZ 1:4 SPI mux/demux */
 	sja1105: ethernet-switch@1 {
 		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "nxp,sja1105t";
 		/* 12 MHz */
 		spi-max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
index f5c03871b205..38281b904301 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
@@ -151,7 +151,7 @@
 	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index e86998ca77d6..e0b9ea6dd510 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -93,10 +93,9 @@
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
 		};
 
-		gic: interrupt-controller@1400000 {
+		gic: interrupt-controller@1401000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
@@ -155,14 +154,13 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@1560000 {
+		esdhc: mmc@1560000 {
 			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 			status = "disabled";
 		};
@@ -611,11 +609,10 @@
 		};
 
 		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
+			compatible = "fsl,ls1021a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
-			clock-names = "wdog-en";
 			big-endian;
 		};
 
@@ -627,9 +624,9 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 				 <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 47>,
-			       <&edma0 1 46>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 46>,
+			       <&edma0 1 47>;
 			status = "disabled";
 		};
 
@@ -641,9 +638,9 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 				 <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 45>,
-			       <&edma0 1 44>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 44>,
+			       <&edma0 1 45>;
 			status = "disabled";
 		};
 
@@ -707,6 +704,7 @@
 
 		enet0: ethernet@2d10000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d10000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -717,8 +715,6 @@
 			dma-coherent;
 
 			queue-group@2d10000 {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d10000 0x0 0x1000>;
 				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
@@ -726,8 +722,6 @@
 			};
 
 			queue-group@2d14000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d14000 0x0 0x1000>;
 				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
@@ -737,6 +731,7 @@
 
 		enet1: ethernet@2d50000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d50000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -746,8 +741,6 @@
 			dma-coherent;
 
 			queue-group@2d50000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d50000 0x0 0x1000>;
 				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
@@ -755,8 +748,6 @@
 			};
 
 			queue-group@2d54000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d54000 0x0 0x1000>;
 				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
@@ -766,6 +757,7 @@
 
 		enet2: ethernet@2d90000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d90000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -775,8 +767,6 @@
 			dma-coherent;
 
 			queue-group@2d90000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d90000 0x0 0x1000>;
 				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
@@ -784,8 +774,6 @@
 			};
 
 			queue-group@2d94000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d94000 0x0 0x1000>;
 				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
@@ -810,7 +798,6 @@
 			snps,dis_rxdet_inp3_quirk;
 			usb3-lpm-capable;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-			snps,host-vbus-glitches;
 		};
 
 		pcie@3400000 {
@@ -917,7 +904,7 @@
 			ranges = <0x0 0x0 0x10010000 0x10000>;
 		};
 
-		qdma: dma-controller@8390000 {
+		qdma: dma-controller@8388000 {
 			compatible = "fsl,ls1021a-qdma";
 			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
 			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
@@ -937,17 +924,15 @@
 			big-endian;
 		};
 
-		rcpm: power-controller@1ee2140 {
+		rcpm: wakeup-controller@1ee2140 {
 			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x8>;
 			#fsl,rcpm-wakeup-cells = <2>;
-			#power-domain-cells = <0>;
 		};
 
-		ftm_alarm0: timer0@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1021a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
-			reg-names = "ftm";
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			big-endian;
diff --git a/arch/arm/boot/dts/nxp/mxs/Makefile b/arch/arm/boot/dts/nxp/mxs/Makefile
index a430d04f9c69..d72ba702b6fa 100644
--- a/arch/arm/boot/dts/nxp/mxs/Makefile
+++ b/arch/arm/boot/dts/nxp/mxs/Makefile
@@ -5,9 +5,13 @@ dtb-$(CONFIG_ARCH_MXS) += \
 	imx23-sansa.dtb \
 	imx23-stmp378x_devb.dtb \
 	imx23-xfi3.dtb \
+	imx28-amarula-rmm.dtb \
 	imx28-apf28.dtb \
 	imx28-apf28dev.dtb \
 	imx28-apx4devkit.dtb \
+	imx28-btt3-0.dtb \
+	imx28-btt3-1.dtb \
+	imx28-btt3-2.dtb \
 	imx28-cfa10036.dtb \
 	imx28-cfa10037.dtb \
 	imx28-cfa10049.dtb \
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
index cb661bf2d157..613f13b6c8a8 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
@@ -93,9 +93,9 @@
 						MX23_PAD_LCD_HSYNC__GPIO_1_24
 						MX23_PAD_PWM3__GPIO_1_29
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
index 0b088c8ab6b6..fad08f6c008f 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
@@ -83,9 +83,9 @@
 					fsl,pinmux-ids = <
 						MX23_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				key_pins_a: keys@0 {
@@ -94,9 +94,9 @@
 						MX23_PAD_ROTARYA__GPIO_2_7
 						MX23_PAD_ROTARYB__GPIO_2_8
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts
new file mode 100644
index 000000000000..ddb64f3d0471
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "amarula,imx28-rmm", "fsl,imx28";
+	model = "Amarula i.MX28 rmm";
+
+	memory@40000000 {
+		reg = <0x40000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		power-supply = <&reg_5v>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 7 100000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		led-0 {
+			gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_fec_3v3: regulator-fec-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&fec_3v3_enable_pin>;
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <300000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_vbus_enable_pin>;
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_enable_pin>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx28-mrmmi-tlv320aic3x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPROUT",
+			"Headphone Jack", "HPRCOM";
+		simple-audio-card,mclk-fs = <512>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&saif0>;
+			clocks = <&saif0>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3x>;
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&duart_pins_b {
+	fsl,voltage = <MXS_VOLTAGE_LOW>;
+};
+
+&gpmi {
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	tlv320aic3x: audio-codec@18 {
+		compatible = "ti,tlv320aic3x";
+		pinctrl-names = "default";
+		pinctrl-0 = <&tlv320aic3x_pins>;
+		reg = <0x18>;
+		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		DVDD-supply = <&reg_1v8>;
+		IOVDD-supply = <&reg_3v3>;
+		AVDD-supply = <&reg_3v3>;
+		DRVDD-supply = <&reg_3v3>;
+	};
+
+	touchscreen: touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5x06_pins &edt_ft5x06_wake_pin>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&lradc {
+	status = "okay";
+};
+
+&mac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_fec_3v3>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			max-speed = <100>;
+			reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	edt_ft5x06_pins: edt-ft5x06@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY1__GPIO_0_21 /* Reset */
+			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* Interrupt */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	edt_ft5x06_wake_pin: edt-ft5x06-wake@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_GPMI_CE2N__GPIO_0_18>;
+		fsl,drive-strength = <MXS_DRIVE_16mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	fec_3v3_enable_pin: fec-3v3-enable@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SPDIF__GPIO_3_27>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS1__GPIO_2_20  /* External power */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	leds_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7
+			MX28_PAD_PWM0__GPIO_3_16
+			MX28_PAD_PWM1__GPIO_3_17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	tlv320aic3x_pins: tlv320aic3x-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DATA4__GPIO_2_4>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	usb0_vbus_enable_pin: usb0-vbus-enable@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DATA5__GPIO_2_5>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	usb1_vbus_enable_pin: usb1-vbus-enable@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DATA6__GPIO_2_6>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a &pwm7_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+/* microSD */
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+	broken-cd;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts
new file mode 100644
index 000000000000..6ac46e4b21bb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-btt3.dtsi"
+
+&hog_pins_rev {
+	fsl,pull-up = <MXS_PULL_ENABLE>;
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts
new file mode 100644
index 000000000000..213fe931c58b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-btt3.dtsi"
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts
new file mode 100644
index 000000000000..4bccd784d065
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-btt3.dtsi"
+
+/ {
+	panel {
+		compatible = "powertip,st7272", "panel-dpi";
+		power-supply = <&reg_3v3>;
+		width-mm = <70>;
+		height-mm = <52>;
+
+		panel-timing {
+			clock-frequency = <6500000>;
+			hactive = <320>;
+			vactive = <240>;
+			hfront-porch = <20>;
+			hback-porch = <68>;
+			hsync-len = <30>;
+			vfront-porch = <4>;
+			vback-porch = <14>;
+			vsync-len = <4>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi
new file mode 100644
index 000000000000..a6903ef2b093
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+/dts-v1/;
+#include "imx28-lwe.dtsi"
+
+/ {
+	model = "BTT3";
+
+	compatible = "lwn,imx28-btt3", "fsl,imx28";
+
+	chosen {
+	       bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1 quiet";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+		device_type = "memory";
+	};
+
+	panel {
+		compatible = "powertip,hx8238a", "panel-dpi";
+		power-supply = <&reg_3v3>;
+		width-mm = <70>;
+		height-mm = <52>;
+
+		panel-timing {
+			clock-frequency = <6500000>;
+			hactive = <320>;
+			vactive = <240>;
+			hfront-porch = <20>;
+			hback-porch = <38>;
+			hsync-len = <30>;
+			vfront-porch = <4>;
+			vback-porch = <14>;
+			vsync-len = <4>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <0>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BTTC Audio";
+		simple-audio-card,widgets = "Speaker", "BTTC Speaker";
+		simple-audio-card,routing = "BTTC Speaker", "SPKOUTN", "BTTC Speaker", "SPKOUTP";
+
+		simple-audio-card,dai-link@0 {
+			format = "left_j";
+			bitclock-master = <&dai0_master>;
+			frame-master = <&dai0_master>;
+			mclk-fs = <256>;
+
+			dai0_master: cpu {
+				sound-dai = <&saif0>;
+			};
+
+			codec {
+				sound-dai = <&wm89xx>;
+				clocks = <&saif0>;
+			};
+		};
+	};
+
+	wifi_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_pin_bttc>;
+		reset-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		/* W1-163 needs 60us for WL_EN to be low and */
+		/* 150ms after high before downloading FW is possible */
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <100>;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c0 {
+	wm89xx: audio-codec@1a {
+		compatible = "wlf,wm8940";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a>, <&lcdif_sync_pins_bttc>,
+		    <&lcdif_reset_pins_bttc>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&mac0 {
+	clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+	clock-names = "ipg", "ahb", "enet_out";
+	phy-handle = <&mac0_phy>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_3v3>;
+	/*
+	 * This MAC address is adjusted during production.
+	 * Value specified below is used as a fallback during recovery.
+	 */
+	local-mac-address = [ 00 11 B8 00 BF 8A ];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mac0_phy: ethernet-phy@0 {
+			/* LAN8720Ai - PHY ID */
+			compatible = "ethernet-phy-id0007.c0f0","ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			smsc,disable-energy-detect;
+			max-speed = <100>;
+			reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>, <&hog_pins_rev>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY2__GPIO_0_22
+			MX28_PAD_GPMI_RDY3__GPIO_0_23
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_LCD_VSYNC__GPIO_1_28
+			MX28_PAD_SSP2_SS1__GPIO_2_20
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+			MX28_PAD_AUART2_CTS__GPIO_3_10
+			MX28_PAD_AUART2_RTS__GPIO_3_11
+			MX28_PAD_GPMI_WRN__GPIO_0_25
+			MX28_PAD_ENET0_RXD2__GPIO_4_9
+			MX28_PAD_ENET0_TXD2__GPIO_4_11
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_rev: hog@1 {
+		reg = <1>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RXD3__GPIO_4_10
+			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+			MX28_PAD_ENET0_COL__GPIO_4_14
+			MX28_PAD_ENET0_CRS__GPIO_4_15
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	keypad_pins_bttc: keypad-bttc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_AUART0_CTS__GPIO_3_2
+			MX28_PAD_AUART0_RTS__GPIO_3_3
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D04__GPIO_0_4
+			MX28_PAD_GPMI_D05__GPIO_0_5
+			MX28_PAD_GPMI_D06__GPIO_0_6
+			MX28_PAD_GPMI_D07__GPIO_0_7
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_CE2N__GPIO_0_18
+			MX28_PAD_GPMI_CE3N__GPIO_0_19
+			MX28_PAD_GPMI_RDY0__GPIO_0_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_sync_pins_bttc: lcdif-bttc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_reset_pins_bttc: lcdif-bttc@1 {
+		reg = <1>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	ssp1_sdio_pins_a: ssp1-sdio@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP1_DATA0__SSP1_D0
+			MX28_PAD_GPMI_D01__SSP1_D1
+			MX28_PAD_GPMI_D02__SSP1_D2
+			MX28_PAD_SSP1_DATA3__SSP1_D3
+			MX28_PAD_SSP1_CMD__SSP1_CMD
+			MX28_PAD_SSP1_SCK__SSP1_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	wifi_en_pin_bttc: wifi-en-pin@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a>;
+	status = "okay";
+};
+
+&reg_usb_5v {
+	gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clks 53>;
+	assigned-clock-rates = <12000000>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	#sound-dai-cells = <0>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp1 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp1_sdio_pins_a>;
+	bus-width = <4>;
+	no-1-8-v;       /* force 3.3V VIO */
+	non-removable;
+	vmmc-supply = <&reg_3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
index d004b1cbb4ae..f170df37b3f8 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
@@ -102,9 +102,9 @@
 			0x31c3 /*
 			MX28_PAD_PWM3__GPIO_3_28 */
 		>;
-		fsl,drive-strength = <0>;
-		fsl,voltage = <1>;
-		fsl,pull-up = <0>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
index 0f01dded4e3d..ca62e7933116 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
@@ -24,30 +24,25 @@
 	};
 
 	leds {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "gpio-leds";
 		status = "okay";
 
-		led@1 {
+		led-1 {
 			label = "sps1-1:yellow:user";
 			gpios = <&gpio0 6 0>;
 			linux,default-trigger = "heartbeat";
-			reg = <0>;
 		};
 
-		led@2 {
+		led-2 {
 			label = "sps1-2:red:user";
 			gpios = <&gpio0 3 0>;
 			linux,default-trigger = "heartbeat";
-			reg = <1>;
 		};
 
-		led@3 {
+		led-3 {
 			label = "sps1-3:red:user";
 			gpios = <&gpio0 0 0>;
-			default-trigger = "heartbeat";
-			reg = <2>;
+			linux,default-trigger = "heartbeat";
 		};
 
 	};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index bbea8b77386f..ece46d0e7c7f 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -755,6 +755,16 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				pwm7_pins_a: pwm7@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__PWM_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
index 5a19da9313ae..86c360868e4b 100644
--- a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
@@ -17,6 +17,7 @@
 	panel: panel {
 		compatible = "edt,et057090dhu";
 		backlight = <&bl>;
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -142,11 +143,9 @@
 };
 
 &iomuxc {
-	vf610-colibri {
-		pinctrl_can_int: can_int {
-			fsl,pins = <
-				VF610_PAD_PTB21__GPIO_43	0x22ed
-			>;
-		};
+	pinctrl_can_int: can_intgrp {
+		fsl,pins = <
+			VF610_PAD_PTB21__GPIO_43	0x22ed
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
index cc1e069c44e6..98f9ee1b0030 100644
--- a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
@@ -171,180 +171,178 @@
 };
 
 &iomuxc {
-	vf610-colibri {
-		pinctrl_flexcan0: can0grp {
-			fsl,pins = <
-				VF610_PAD_PTB14__CAN0_RX	0x31F1
-				VF610_PAD_PTB15__CAN0_TX	0x31F2
-			>;
-		};
-
-		pinctrl_flexcan1: can1grp {
-			fsl,pins = <
-				VF610_PAD_PTB16__CAN1_RX	0x31F1
-				VF610_PAD_PTB17__CAN1_TX	0x31F2
-			>;
-		};
-
-		pinctrl_gpio_ext: gpio_ext {
-			fsl,pins = <
-				VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
-				VF610_PAD_PTD9__GPIO_88		0x22ed /* EXT_IO_1 */
-				VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
-			>;
-		};
-
-		pinctrl_dcu0_1: dcu0grp_1 {
-			fsl,pins = <
-				VF610_PAD_PTE0__DCU0_HSYNC	0x1902
-				VF610_PAD_PTE1__DCU0_VSYNC	0x1902
-				VF610_PAD_PTE2__DCU0_PCLK	0x1902
-				VF610_PAD_PTE4__DCU0_DE		0x1902
-				VF610_PAD_PTE5__DCU0_R0		0x1902
-				VF610_PAD_PTE6__DCU0_R1		0x1902
-				VF610_PAD_PTE7__DCU0_R2		0x1902
-				VF610_PAD_PTE8__DCU0_R3		0x1902
-				VF610_PAD_PTE9__DCU0_R4		0x1902
-				VF610_PAD_PTE10__DCU0_R5	0x1902
-				VF610_PAD_PTE11__DCU0_R6	0x1902
-				VF610_PAD_PTE12__DCU0_R7	0x1902
-				VF610_PAD_PTE13__DCU0_G0	0x1902
-				VF610_PAD_PTE14__DCU0_G1	0x1902
-				VF610_PAD_PTE15__DCU0_G2	0x1902
-				VF610_PAD_PTE16__DCU0_G3	0x1902
-				VF610_PAD_PTE17__DCU0_G4	0x1902
-				VF610_PAD_PTE18__DCU0_G5	0x1902
-				VF610_PAD_PTE19__DCU0_G6	0x1902
-				VF610_PAD_PTE20__DCU0_G7	0x1902
-				VF610_PAD_PTE21__DCU0_B0	0x1902
-				VF610_PAD_PTE22__DCU0_B1	0x1902
-				VF610_PAD_PTE23__DCU0_B2	0x1902
-				VF610_PAD_PTE24__DCU0_B3	0x1902
-				VF610_PAD_PTE25__DCU0_B4	0x1902
-				VF610_PAD_PTE26__DCU0_B5	0x1902
-				VF610_PAD_PTE27__DCU0_B6	0x1902
-				VF610_PAD_PTE28__DCU0_B7	0x1902
-			>;
-		};
-
-		pinctrl_dspi1: dspi1grp {
-			fsl,pins = <
-				VF610_PAD_PTD5__DSPI1_CS0		0x33e2
-				VF610_PAD_PTD6__DSPI1_SIN		0x33e1
-				VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
-				VF610_PAD_PTD8__DSPI1_SCK		0x33e2
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-				VF610_PAD_PTB20__GPIO_42	0x219d
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTA6__RMII_CLKOUT		0x30d2
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
-
-		pinctrl_gpio_bl_on: gpio_bl_on {
-			fsl,pins = <
-				VF610_PAD_PTC0__GPIO_45		0x22ef
-			>;
-		};
-
-		pinctrl_i2c0: i2c0grp {
-			fsl,pins = <
-				VF610_PAD_PTB14__I2C0_SCL		0x37ff
-				VF610_PAD_PTB15__I2C0_SDA		0x37ff
-			>;
-		};
-
-		pinctrl_i2c0_gpio: i2c0gpiogrp {
-			fsl,pins = <
-				VF610_PAD_PTB14__GPIO_36		0x37ff
-				VF610_PAD_PTB15__GPIO_37		0x37ff
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				VF610_PAD_PTD23__NF_IO7		0x28df
-				VF610_PAD_PTD22__NF_IO6		0x28df
-				VF610_PAD_PTD21__NF_IO5		0x28df
-				VF610_PAD_PTD20__NF_IO4		0x28df
-				VF610_PAD_PTD19__NF_IO3		0x28df
-				VF610_PAD_PTD18__NF_IO2		0x28df
-				VF610_PAD_PTD17__NF_IO1		0x28df
-				VF610_PAD_PTD16__NF_IO0		0x28df
-				VF610_PAD_PTB24__NF_WE_B	0x28c2
-				VF610_PAD_PTB25__NF_CE0_B	0x28c2
-				VF610_PAD_PTB27__NF_RE_B	0x28c2
-				VF610_PAD_PTC26__NF_RB_B	0x283d
-				VF610_PAD_PTC27__NF_ALE		0x28c2
-				VF610_PAD_PTC28__NF_CLE		0x28c2
-			>;
-		};
-
-		pinctrl_pwm0: pwm0grp {
-			fsl,pins = <
-				VF610_PAD_PTB0__FTM0_CH0		0x1182
-				VF610_PAD_PTB1__FTM0_CH1		0x1182
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				VF610_PAD_PTB8__FTM1_CH0		0x1182
-				VF610_PAD_PTB9__FTM1_CH1		0x1182
-			>;
-		};
-
-		pinctrl_uart0: uart0grp {
-			fsl,pins = <
-				VF610_PAD_PTB10__UART0_TX		0x21a2
-				VF610_PAD_PTB11__UART0_RX		0x21a1
-				VF610_PAD_PTB12__UART0_RTS		0x21a2
-				VF610_PAD_PTB13__UART0_CTS		0x21a1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				VF610_PAD_PTD0__UART2_TX		0x21a2
-				VF610_PAD_PTD1__UART2_RX		0x21a1
-				VF610_PAD_PTD2__UART2_RTS		0x21a2
-				VF610_PAD_PTD3__UART2_CTS		0x21a1
-			>;
-		};
-
-		pinctrl_usbh1_reg: gpio_usb_vbus {
-			fsl,pins = <
-				VF610_PAD_PTD4__GPIO_83			0x22ed
-			>;
-		};
+	pinctrl_flexcan0: can0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__CAN0_RX	0x31F1
+			VF610_PAD_PTB15__CAN0_TX	0x31F2
+		>;
+	};
+
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__CAN1_RX	0x31F1
+			VF610_PAD_PTB17__CAN1_TX	0x31F2
+		>;
+	};
+
+	pinctrl_gpio_ext: gpio_extgrp {
+		fsl,pins = <
+			VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
+			VF610_PAD_PTD9__GPIO_88		0x22ed /* EXT_IO_1 */
+			VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
+		>;
+	};
+
+	pinctrl_dcu0_1: dcu01grp {
+		fsl,pins = <
+			VF610_PAD_PTE0__DCU0_HSYNC	0x1902
+			VF610_PAD_PTE1__DCU0_VSYNC	0x1902
+			VF610_PAD_PTE2__DCU0_PCLK	0x1902
+			VF610_PAD_PTE4__DCU0_DE		0x1902
+			VF610_PAD_PTE5__DCU0_R0		0x1902
+			VF610_PAD_PTE6__DCU0_R1		0x1902
+			VF610_PAD_PTE7__DCU0_R2		0x1902
+			VF610_PAD_PTE8__DCU0_R3		0x1902
+			VF610_PAD_PTE9__DCU0_R4		0x1902
+			VF610_PAD_PTE10__DCU0_R5	0x1902
+			VF610_PAD_PTE11__DCU0_R6	0x1902
+			VF610_PAD_PTE12__DCU0_R7	0x1902
+			VF610_PAD_PTE13__DCU0_G0	0x1902
+			VF610_PAD_PTE14__DCU0_G1	0x1902
+			VF610_PAD_PTE15__DCU0_G2	0x1902
+			VF610_PAD_PTE16__DCU0_G3	0x1902
+			VF610_PAD_PTE17__DCU0_G4	0x1902
+			VF610_PAD_PTE18__DCU0_G5	0x1902
+			VF610_PAD_PTE19__DCU0_G6	0x1902
+			VF610_PAD_PTE20__DCU0_G7	0x1902
+			VF610_PAD_PTE21__DCU0_B0	0x1902
+			VF610_PAD_PTE22__DCU0_B1	0x1902
+			VF610_PAD_PTE23__DCU0_B2	0x1902
+			VF610_PAD_PTE24__DCU0_B3	0x1902
+			VF610_PAD_PTE25__DCU0_B4	0x1902
+			VF610_PAD_PTE26__DCU0_B5	0x1902
+			VF610_PAD_PTE27__DCU0_B6	0x1902
+			VF610_PAD_PTE28__DCU0_B7	0x1902
+		>;
+	};
+
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x33e2
+			VF610_PAD_PTD6__DSPI1_SIN		0x33e1
+			VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
+			VF610_PAD_PTD8__DSPI1_SCK		0x33e2
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTB20__GPIO_42	0x219d
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKOUT		0x30d2
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpio_bl_ongrp {
+		fsl,pins = <
+			VF610_PAD_PTC0__GPIO_45		0x22ef
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c0_gpio: i2c0gpiogrp {
+		fsl,pins = <
+			VF610_PAD_PTB14__GPIO_36		0x37ff
+			VF610_PAD_PTB15__GPIO_37		0x37ff
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B	0x28c2
+			VF610_PAD_PTB25__NF_CE0_B	0x28c2
+			VF610_PAD_PTB27__NF_RE_B	0x28c2
+			VF610_PAD_PTC26__NF_RB_B	0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+		>;
+	};
+
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <
+			VF610_PAD_PTB0__FTM0_CH0		0x1182
+			VF610_PAD_PTB1__FTM0_CH1		0x1182
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			VF610_PAD_PTB8__FTM1_CH0		0x1182
+			VF610_PAD_PTB9__FTM1_CH1		0x1182
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+			VF610_PAD_PTB12__UART0_RTS		0x21a2
+			VF610_PAD_PTB13__UART0_CTS		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+			VF610_PAD_PTD2__UART2_RTS		0x21a2
+			VF610_PAD_PTD3__UART2_CTS		0x21a1
+		>;
+	};
+
+	pinctrl_usbh1_reg: gpio_usb_vbusgrp {
+		fsl,pins = <
+			VF610_PAD_PTD4__GPIO_83			0x22ed
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi
index 8af7ed56e653..ae3403c766d6 100644
--- a/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi
@@ -40,30 +40,28 @@
 };
 
 &iomuxc {
-	vf610-colibri {
-		pinctrl_touchctrl_idle: touchctrl_idle {
-			fsl,pins = <
-				VF610_PAD_PTA18__GPIO_8		0x006d
-				VF610_PAD_PTA19__GPIO_9		0x006c
-				>;
-		};
+	pinctrl_touchctrl_idle: touchctrl_idlegrp {
+		fsl,pins = <
+			VF610_PAD_PTA18__GPIO_8		0x006d
+			VF610_PAD_PTA19__GPIO_9		0x006c
+			>;
+	};
 
-		pinctrl_touchctrl_default: touchctrl_default {
-			fsl,pins = <
-				VF610_PAD_PTA18__ADC0_SE0	0x0040
-				VF610_PAD_PTA19__ADC0_SE1	0x0040
-				VF610_PAD_PTA16__ADC1_SE0	0x0040
-				VF610_PAD_PTB2__ADC1_SE2	0x0040
-				>;
-		};
+	pinctrl_touchctrl_default: touchctrl_defaultgrp {
+		fsl,pins = <
+			VF610_PAD_PTA18__ADC0_SE0	0x0040
+			VF610_PAD_PTA19__ADC0_SE1	0x0040
+			VF610_PAD_PTA16__ADC1_SE0	0x0040
+			VF610_PAD_PTB2__ADC1_SE2	0x0040
+			>;
+	};
 
-		pinctrl_touchctrl_gpios: touchctrl_gpios {
-			fsl,pins = <
-				VF610_PAD_PTA23__GPIO_13	0x22e9
-				VF610_PAD_PTB23__GPIO_93	0x22e9
-				VF610_PAD_PTA22__GPIO_12	0x22e9
-				VF610_PAD_PTA11__GPIO_4		0x22e9
-				>;
-		};
+	pinctrl_touchctrl_gpios: touchctrl_gpiosgrp {
+		fsl,pins = <
+			VF610_PAD_PTA23__GPIO_13	0x22e9
+			VF610_PAD_PTB23__GPIO_93	0x22e9
+			VF610_PAD_PTA22__GPIO_12	0x22e9
+			VF610_PAD_PTA11__GPIO_4		0x22e9
+			>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/vf/vf500.dtsi b/arch/arm/boot/dts/nxp/vf/vf500.dtsi
index 0c0dd442300a..71ccdaa6f269 100644
--- a/arch/arm/boot/dts/nxp/vf/vf500.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf500.dtsi
@@ -43,15 +43,13 @@
 			};
 		};
 
-		bus@40080000 {
-			pmu@40089000 {
-				compatible = "arm,cortex-a5-pmu";
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-affinity = <&a5_cpu>;
-				reg = <0x40089000 0x1000>;
-			};
-		};
+	};
 
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a5_cpu>;
+		interrupt-parent = <&mscm_ir>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
index 722182f5fd17..e36c854dc297 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
@@ -119,7 +119,7 @@
 	status = "okay";
 
 	spidev0@0 {
-		compatible = "lwn,bk4";
+		compatible = "lwn,bk4-spi";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
 		fsl,spi-cs-sck-delay = <200>;
@@ -136,7 +136,7 @@
 	#address-cells = <0>;
 
 	slave {
-		compatible = "lwn,bk4";
+		compatible = "lwn,bk4-spi";
 		spi-max-frequency = <30000000>;
 	};
 };
@@ -458,7 +458,7 @@
 		>;
 	};
 
-	pinctrl_gpio_spi: pinctrl-gpio-spi {
+	pinctrl_gpio_spi: pinctrl-gpio-spigrp {
 		fsl,pins = <
 			VF610_PAD_PTB18__GPIO_40        0x1183
 			VF610_PAD_PTD10__GPIO_89        0x1183
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi
index 607cec2df861..20aed3946214 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi
@@ -8,7 +8,6 @@
 
 / {
 	model = "Toradex Colibri VF61 COM";
-	compatible = "toradex,vf610-colibri_vf61", "fsl,vf610";
 
 	memory@80000000 {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts
index 703f375d7e24..f1e6344b0c69 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts
@@ -47,39 +47,37 @@
 };
 
 &iomuxc {
-	vf610-cosmic {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-				VF610_PAD_PTB28__GPIO_98	0x219d
-			>;
-		};
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTB28__GPIO_98	0x219d
+		>;
+	};
 
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-twr.dts b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts
index 876c14ecceb6..e7c2f6d46ab2 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-twr.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts
@@ -166,131 +166,129 @@
 };
 
 &iomuxc {
-	vf610-twr {
-		pinctrl_adc0_ad5: adc0ad5grp {
-			fsl,pins = <
-				VF610_PAD_PTC30__ADC0_SE5		0xa1
-			>;
-		};
+	pinctrl_adc0_ad5: adc0ad5grp {
+		fsl,pins = <
+			VF610_PAD_PTC30__ADC0_SE5		0xa1
+		>;
+	};
 
-		pinctrl_dspi0: dspi0grp {
-			fsl,pins = <
-				VF610_PAD_PTB19__DSPI0_CS0		0x1182
-				VF610_PAD_PTB20__DSPI0_SIN		0x1181
-				VF610_PAD_PTB21__DSPI0_SOUT		0x1182
-				VF610_PAD_PTB22__DSPI0_SCK		0x1182
-			>;
-		};
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB19__DSPI0_CS0		0x1182
+			VF610_PAD_PTB20__DSPI0_SIN		0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+			VF610_PAD_PTB22__DSPI0_SCK		0x1182
+		>;
+	};
 
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-				VF610_PAD_PTA7__GPIO_134	0x219d
-			>;
-		};
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTA7__GPIO_134	0x219d
+		>;
+	};
 
-		pinctrl_fec0: fec0grp {
-			fsl,pins = <
-				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
-				VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
-				VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
-				VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
-				VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
-				VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
-				VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
-				VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
-				VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
-				VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
-			>;
-		};
+	pinctrl_fec0: fec0grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
+			VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
+			VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
+			VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
+			VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
+			VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
+			VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
+			VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
+			VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
+		>;
+	};
 
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
 
-		pinctrl_i2c0: i2c0grp {
-			fsl,pins = <
-				VF610_PAD_PTB14__I2C0_SCL		0x30d3
-				VF610_PAD_PTB15__I2C0_SDA		0x30d3
-			>;
-		};
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x30d3
+			VF610_PAD_PTB15__I2C0_SDA		0x30d3
+		>;
+	};
 
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				VF610_PAD_PTD31__NF_IO15	0x28df
-				VF610_PAD_PTD30__NF_IO14	0x28df
-				VF610_PAD_PTD29__NF_IO13	0x28df
-				VF610_PAD_PTD28__NF_IO12	0x28df
-				VF610_PAD_PTD27__NF_IO11	0x28df
-				VF610_PAD_PTD26__NF_IO10	0x28df
-				VF610_PAD_PTD25__NF_IO9		0x28df
-				VF610_PAD_PTD24__NF_IO8		0x28df
-				VF610_PAD_PTD23__NF_IO7		0x28df
-				VF610_PAD_PTD22__NF_IO6		0x28df
-				VF610_PAD_PTD21__NF_IO5		0x28df
-				VF610_PAD_PTD20__NF_IO4		0x28df
-				VF610_PAD_PTD19__NF_IO3		0x28df
-				VF610_PAD_PTD18__NF_IO2		0x28df
-				VF610_PAD_PTD17__NF_IO1		0x28df
-				VF610_PAD_PTD16__NF_IO0		0x28df
-				VF610_PAD_PTB24__NF_WE_B	0x28c2
-				VF610_PAD_PTB25__NF_CE0_B	0x28c2
-				VF610_PAD_PTB27__NF_RE_B	0x28c2
-				VF610_PAD_PTC26__NF_RB_B	0x283d
-				VF610_PAD_PTC27__NF_ALE		0x28c2
-				VF610_PAD_PTC28__NF_CLE		0x28c2
-			>;
-		};
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD31__NF_IO15	0x28df
+			VF610_PAD_PTD30__NF_IO14	0x28df
+			VF610_PAD_PTD29__NF_IO13	0x28df
+			VF610_PAD_PTD28__NF_IO12	0x28df
+			VF610_PAD_PTD27__NF_IO11	0x28df
+			VF610_PAD_PTD26__NF_IO10	0x28df
+			VF610_PAD_PTD25__NF_IO9		0x28df
+			VF610_PAD_PTD24__NF_IO8		0x28df
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B	0x28c2
+			VF610_PAD_PTB25__NF_CE0_B	0x28c2
+			VF610_PAD_PTB27__NF_RE_B	0x28c2
+			VF610_PAD_PTC26__NF_RB_B	0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+		>;
+	};
 
-		pinctrl_pwm0: pwm0grp {
-			fsl,pins = <
-				VF610_PAD_PTB0__FTM0_CH0		0x1582
-				VF610_PAD_PTB1__FTM0_CH1		0x1582
-				VF610_PAD_PTB2__FTM0_CH2		0x1582
-				VF610_PAD_PTB3__FTM0_CH3		0x1582
-			>;
-		};
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <
+			VF610_PAD_PTB0__FTM0_CH0		0x1582
+			VF610_PAD_PTB1__FTM0_CH1		0x1582
+			VF610_PAD_PTB2__FTM0_CH2		0x1582
+			VF610_PAD_PTB3__FTM0_CH3		0x1582
+		>;
+	};
 
-		pinctrl_sai2: sai2grp {
-			fsl,pins = <
-				VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
-				VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
-				VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
-				VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
-				VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
-				VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
-				VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
-			>;
-		};
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
+			VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
+			VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
+			VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
+			VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
+			VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
+			VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				VF610_PAD_PTB6__UART2_TX		0x21a2
-				VF610_PAD_PTB7__UART2_RX		0x21a1
-			>;
-		};
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTB6__UART2_TX		0x21a2
+			VF610_PAD_PTB7__UART2_RX		0x21a1
+		>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
index 7e72f860c3c5..929426c1299c 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
@@ -68,8 +68,8 @@
 		pinctrl-0 = <&pinctrl_optical>;
 		pinctrl-names = "default";
 		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 	};
 
 	supply-voltage-monitor {
@@ -333,7 +333,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 			VF610_PAD_PTE3__GPIO_108		0x31c2
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 029f49be40e3..be6147239362 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -412,13 +412,13 @@
 };
 
 &iomuxc {
-	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
+	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTE27__GPIO_132	0x33e2
 		>;
 	};
 
-	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB22__GPIO_44	0x33e2
 			VF610_PAD_PTB21__GPIO_43	0x33e2
@@ -428,7 +428,7 @@
 		>;
 	};
 
-	pinctrl_mdio_mux: pinctrl-mdio-mux {
+	pinctrl_mdio_mux: pinctrl-mdio-mux-grp {
 		fsl,pins = <
 			VF610_PAD_PTA18__GPIO_8		0x31c2
 			VF610_PAD_PTA19__GPIO_9		0x31c2
@@ -437,7 +437,7 @@
 		>;
 	};
 
-	pinctrl_pca9554_22: pinctrl-pca95540-22 {
+	pinctrl_pca9554_22: pinctrl-pca95540-22-grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98	0x219d
 		>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts
index 6f9878f124c4..79ea7cf57a4d 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts
@@ -311,7 +311,7 @@
 	 *    I/O14 - OPT1_TX_DIS
 	 *    I/O15 - OPT2_TX_DIS
 	 */
-	gpio6: sx1503@20 {
+	gpio6: pinctrl@20 {
 		compatible = "semtech,sx1503q";
 
 		pinctrl-names = "default";
@@ -392,7 +392,7 @@
 };
 
 &gpio0 {
-	eth0_intrp {
+	eth0-intrp-hog {
 		gpio-hog;
 		gpios = <23 GPIO_ACTIVE_HIGH>;
 		input;
@@ -401,7 +401,7 @@
 };
 
 &gpio3 {
-	eth0_intrp {
+	eth0-intrp-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		input;
@@ -429,7 +429,7 @@
 };
 
 &iomuxc {
-	pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
+	pinctr_atzb_rf_233: pinctrl-atzb-rf-233grp {
 		fsl,pins = <
 			VF610_PAD_PTB2__GPIO_24		0x31c2
 			VF610_PAD_PTE27__GPIO_132	0x33e2
@@ -437,7 +437,7 @@
 	};
 
 
-	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+	pinctrl_sx1503_20: pinctrl-sx1503-20grp {
 		fsl,pins = <
 			VF610_PAD_PTB1__GPIO_23		0x219d
 		>;
@@ -450,7 +450,7 @@
 		>;
 	};
 
-	pinctrl_mdio_mux: pinctrl-mdio-mux {
+	pinctrl_mdio_mux: pinctrl-mdio-muxgrp {
 		fsl,pins = <
 			VF610_PAD_PTA18__GPIO_8		0x31c2
 			VF610_PAD_PTA19__GPIO_9		0x31c2
@@ -458,7 +458,7 @@
 		>;
 	};
 
-	pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
+	pinctrl_fec0_phy_int: pinctrl-fec0-phy-intgrp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98	0x219d
 		>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
index ce5e52896b19..91cc496ffb90 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
@@ -335,7 +335,7 @@
 		>;
 	};
 
-	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB22__GPIO_44	0x33e2
 			VF610_PAD_PTB21__GPIO_43	0x33e2
@@ -345,19 +345,19 @@
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB5__GPIO_27		0x219d
 		>;
 	};
 
-	pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+	pinctrl_gpio_switch1: pinctrl-gpio-switch1-grp {
 		fsl,pins = <
 			VF610_PAD_PTB4__GPIO_26		0x219d
 		>;
 	};
 
-	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset-grp {
 		fsl,pins = <
 			 VF610_PAD_PTE14__GPIO_119	0x31c2
 			 >;
@@ -370,7 +370,7 @@
 		>;
 	};
 
-	pinctrl_i2c0_gpio: i2c0grp-gpio {
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		fsl,pins = <
 			VF610_PAD_PTB14__GPIO_36	0x31c2
 			VF610_PAD_PTB15__GPIO_37	0x31c2
@@ -392,7 +392,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debug-grp {
 		fsl,pins = <
 			 VF610_PAD_PTD20__GPIO_74	0x31c2
 			 >;
@@ -436,7 +436,7 @@
 		>;
 	};
 
-	pinctrl_usb_vbus: pinctrl-usb-vbus {
+	pinctrl_usb_vbus: pinctrl-usb-vbus-grp {
 		fsl,pins = <
 			VF610_PAD_PTA16__GPIO_6	0x31c2
 		>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
index 77492eeea450..8020a644dd9d 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
@@ -583,7 +583,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	gpio9: io-expander@20 {
+	gpio9: pinctrl@20 {
 		compatible = "semtech,sx1503q";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -623,7 +623,6 @@
 
 	i2c-mux@70 {
 		compatible = "nxp,pca9548";
-		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
@@ -662,7 +661,6 @@
 
 	i2c-mux@71 {
 		compatible = "nxp,pca9548";
-		pinctrl-names = "default";
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -747,7 +745,7 @@
 		>;
 	};
 
-	pinctrl_dspi2: dspi2gpio {
+	pinctrl_dspi2: dspi2gpiogrp {
 		fsl,pins = <
 			VF610_PAD_PTD30__GPIO_64		0x33e2
 			VF610_PAD_PTD29__GPIO_65		0x33e1
@@ -819,13 +817,13 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			 VF610_PAD_PTB26__GPIO_96		0x31c2
 		   >;
 	};
 
-	pinctrl_mdio_mux: pinctrl-mdio-mux {
+	pinctrl_mdio_mux: pinctrl-mdio-muxgrp {
 		fsl,pins = <
 			VF610_PAD_PTE27__GPIO_132		0x31c2
 			VF610_PAD_PTE28__GPIO_133		0x31c2
@@ -845,7 +843,7 @@
 		>;
 	};
 
-	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+	pinctrl_sx1503_20: pinctrl-sx1503-20grp {
 		fsl,pins = <
 			VF610_PAD_PTD31__GPIO_63		0x219d
 			>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
index 2a490464660c..423d185c971f 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
@@ -323,7 +323,7 @@
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
@@ -343,7 +343,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 		>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
index 078d8699e16d..d5c7f710c314 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
@@ -284,13 +284,13 @@
 		>;
 	};
 
-	pinctrl_gpio_phy9: pinctrl-gpio-phy9 {
+	pinctrl_gpio_phy9: pinctrl-gpio-phy9grp {
 		fsl,pins = <
 			VF610_PAD_PTB24__GPIO_94		0x219d
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
@@ -310,7 +310,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 		>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
index 22c8f44390a9..344cc2b4d0ad 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
@@ -330,7 +330,7 @@
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
@@ -350,7 +350,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 		>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
index 2c2db47af441..86d32f54c250 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
@@ -50,14 +50,12 @@
 };
 
 &iomuxc {
-	vf610-colibri {
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				VF610_PAD_PTD0__UART2_TX		0x21a2
-				VF610_PAD_PTD1__UART2_RX		0x21a1
-				VF610_PAD_PTD2__UART2_RTS		0x21a2
-				VF610_PAD_PTD3__UART2_CTS		0x21a1
-			>;
-		};
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+			VF610_PAD_PTD2__UART2_RTS		0x21a2
+			VF610_PAD_PTD3__UART2_CTS		0x21a1
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
index f7474c11aabd..454b484368cb 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
@@ -79,12 +79,10 @@
 };
 
 &iomuxc {
-	vf610-cosmic {
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				VF610_PAD_PTA20__UART3_TX		0x21a2
-				VF610_PAD_PTA21__UART3_RX		0x21a1
-			>;
-		};
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			VF610_PAD_PTA20__UART3_TX		0x21a2
+			VF610_PAD_PTA21__UART3_RX		0x21a1
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
index 2bb331a87721..648d219e1d0e 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
@@ -55,3 +55,7 @@
 &mscm_ir {
 	interrupt-parent = <&nvic>;
 };
+
+&nvic {
+	arm,num-irq-priority-bits = <4>;
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
index acccf9a3c898..568d81807c81 100644
--- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -158,8 +158,8 @@
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <6>;
-				dmas = <&edma1 1 12>, <&edma1 1 13>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 1 13>, <&edma1 1 12>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -172,8 +172,8 @@
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
 				spi-num-chipselects = <4>;
-				dmas = <&edma1 1 14>, <&edma1 1 15>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 1 15>, <&edma1 1 14>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -304,7 +304,7 @@
 				status = "disabled";
 			};
 
-			iomuxc: iomuxc@40048000 {
+			iomuxc: pinctrl@40048000 {
 				compatible = "fsl,vf610-iomuxc";
 				reg = <0x40048000 0x1000>;
 			};
@@ -318,6 +318,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 0 32>;
+				ngpios = <32>;
 			};
 
 			gpio1: gpio@4004a000 {
@@ -329,6 +330,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 32 32>;
+				ngpios = <32>;
 			};
 
 			gpio2: gpio@4004b000 {
@@ -340,6 +342,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 64 32>;
+				ngpios = <32>;
 			};
 
 			gpio3: gpio@4004c000 {
@@ -351,6 +354,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 96 32>;
+				ngpios = <32>;
 			};
 
 			gpio4: gpio@4004d000 {
@@ -362,6 +366,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 128 7>;
+				ngpios = <7>;
 			};
 
 			anatop: anatop@40050000 {
@@ -529,9 +534,8 @@
 				clocks = <&clks VF610_CLK_DSPI2>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 10>,
-					<&edma1 0 11>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 0 11>, <&edma1 0 10>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -544,8 +548,8 @@
 				clocks = <&clks VF610_CLK_DSPI3>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 12>, <&edma1 0 13>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 0 13>, <&edma1 0 12>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -604,7 +608,7 @@
 
 			ftm: ftm@400b8000 {
 				compatible = "fsl,ftm-timer";
-				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				reg = <0x400b8000 0x1000>, <0x400b9000 0x1000>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "ftm-evt", "ftm-src",
 					"ftm-evt-counter-en", "ftm-src-counter-en";
@@ -678,7 +682,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@400e0000 {
+			nfc: nand-controller@400e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-nfc";
@@ -725,13 +729,13 @@
 				clocks = <&clks VF610_CLK_CAAM>;
 				clock-names = "ipg";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index f06c6d425e91..c7873dcef154 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8064-ifc6410.dtb \
 	qcom-apq8064-sony-xperia-lagan-yuga.dtb \
 	qcom-apq8064-asus-nexus7-flo.dtb \
+	qcom-apq8064-lg-nexus4-mako.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
@@ -42,10 +43,12 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8926-samsung-matisselte.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8960-samsung-expressatt.dtb \
+	qcom-msm8960-sony-huashan.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
 	qcom-msm8974-samsung-hlte.dtb \
 	qcom-msm8974-sony-xperia-rhine-amami.dtb \
 	qcom-msm8974-sony-xperia-rhine-honami.dtb \
+	qcom-msm8974-sony-xperia-rhine-togari.dtb \
 	qcom-msm8974pro-fairphone-fp2.dtb \
 	qcom-msm8974pro-htc-m8.dtb \
 	qcom-msm8974pro-oneplus-bacon.dtb \
diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
index 5dbca83f2230..e6392f7d14c7 100644
--- a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
+++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
@@ -31,6 +31,15 @@
 			vsp-supply = <&reg_lcd_pos>;
 			vsn-supply = <&reg_lcd_neg>;
 			vddio-supply = <&vddio_disp_vreg>;
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_ESC0_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MMSS_MISC_AHB_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
 		};
 	};
 
@@ -53,9 +62,12 @@
 		};
 	};
 
+	/* TI TPS22902 */
 	vddio_disp_vreg: regulator-vddio-disp {
 		compatible = "regulator-fixed";
 		regulator-name = "vddio_disp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 		gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&pm8226_l8>;
 		startup-delay-us = <300>;
@@ -97,6 +109,7 @@
 };
 
 &blsp1_i2c2 {
+	clock-frequency = <100000>;
 	status = "okay";
 
 	magnetometer@c {
@@ -126,6 +139,7 @@
 };
 
 &blsp1_i2c3 {
+	clock-frequency = <400000>;
 	status = "okay";
 
 	regulator@3e {
@@ -136,8 +150,8 @@
 
 		reg_lcd_pos: outp {
 			regulator-name = "outp";
-			regulator-min-microvolt = <4000000>;
-			regulator-max-microvolt = <6000000>;
+			regulator-min-microvolt = <5400000>;
+			regulator-max-microvolt = <5400000>;
 			regulator-active-discharge = <1>;
 			regulator-boot-on;
 			enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
@@ -145,8 +159,8 @@
 
 		reg_lcd_neg: outn {
 			regulator-name = "outn";
-			regulator-min-microvolt = <4000000>;
-			regulator-max-microvolt = <6000000>;
+			regulator-min-microvolt = <5400000>;
+			regulator-max-microvolt = <5400000>;
 			regulator-active-discharge = <1>;
 			regulator-boot-on;
 			enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/qcom/msm8926.dtsi b/arch/arm/boot/dts/qcom/msm8926.dtsi
new file mode 100644
index 000000000000..629654c525b4
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/msm8926.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Luca Weiss <luca@lucaweiss.eu>
+ */
+
+#include "qcom-msm8226.dtsi"
+
+&modem {
+	compatible = "qcom,msm8926-mss-pil";
+	/delete-property/ qcom,ext-bhs-reg;
+};
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index 058962af3005..535cb6a2543f 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -17,6 +17,12 @@
 			pull-up;
 		};
 
+		pm8921_vibrator: vibrator@4a {
+			compatible = "qcom,pm8921-vib";
+			reg = <0x4a>;
+			status = "disabled";
+		};
+
 		pm8921_mpps: mpps@50 {
 			compatible = "qcom,pm8921-mpp",
 				     "qcom,ssbi-mpp";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index da3be658e822..4546fa8beba4 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "qcom-msm8226.dtsi"
 #include "qcom-msm8226-samsung-matisse-common.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
index 7d519156d91d..a8543ca7b556 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
@@ -12,6 +12,8 @@
 #include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
 /delete-node/ &smem_region;
 
 / {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index b3ff8010b149..717bfd74edb7 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -138,7 +138,6 @@
 
 &hdmi {
 	core-vdda-supply = <&pm8921_hdmi_switch>;
-	hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
new file mode 100644
index 000000000000..fdbbc1389297
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "LG Nexus 4 (mako)";
+	compatible = "lg,nexus4-mako", "qcom,apq8064";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+		serial2 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <900000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@88d00000 {
+			compatible = "ramoops";
+			reg = <0x88d00000 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x20000>;
+		};
+	};
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+
+	status = "okay";
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+
+	status = "okay";
+};
+
+&gsbi4_serial {
+	status = "okay";
+};
+
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 1, KEY_VOLUMEUP)
+	>;
+
+	keypad,num-rows = <1>;
+	keypad,num-columns = <5>;
+
+	status = "okay";
+};
+
+&riva {
+	pinctrl-names = "default";
+	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+	vddcx-supply = <&pm8921_s3>;
+	vddmx-supply = <&pm8921_l24>;
+	vddpx-supply = <&pm8921_s4>;
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8921_l4>;
+		vddrfa-supply = <&pm8921_s2>;
+		vddpa-supply = <&pm8921_l10>;
+		vdddig-supply = <&pm8921_lvs2>;
+	};
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		pm8921_l1: l1 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi1_pll_vdda */
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		/* msm_otg-HSUSB_3p3 */
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3500000>;
+			bias-pull-down;
+		};
+
+		/* msm_otg-HSUSB_1p8 */
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		/* msm_sdcc.1-sdc_vdd */
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		/* earjack_debug */
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi_vci */
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		/* wcnss_wlan.0-iris_vddpa */
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi1_avdd */
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		/* touch_vdd */
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		/* slimport_dvdd */
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			bias-pull-down;
+		};
+
+		/* touch_io */
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * mipi_dsi.1-dsi_vddio
+		 * pil_qdsp6v4.1-pll_vdd
+		 * pil_qdsp6v4.2-pll_vdd
+		 * msm_ehci_host.0-HSUSB_1p8
+		 * msm_ehci_host.1-HSUSB_1p8
+		 */
+		pm8921_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * tabla2x-slim-CDC_VDDA_A_1P2V
+		 * tabla2x-slim-VDDD_CDC_D
+		 */
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		pm8921_l26: l26 {
+			regulator-min-microvolt = <375000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+
+		pm8921_l27: l27 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8921_l28: l28 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		/* wcnss_wlan.0-iris_vddio */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		/* wcnss_wlan.0-iris_vdddig */
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		/* mipi_dsi.1-dsi_iovcc */
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		/*
+		 * pil_riva-pll_vdd
+		 * lvds.0-lvds_vdda
+		 * mipi_dsi.1-dsi1_vddio
+		 * hdmi_msm.0-hdmi_vdda
+		 */
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* msm otg HSUSB_VDDCX */
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		/*
+		 * msm_sdcc.1-sdc-vdd_io
+		 * tabla2x-slim-CDC_VDDA_RX
+		 * tabla2x-slim-CDC_VDDA_TX
+		 * tabla2x-slim-CDC_VDD_CP
+		 * tabla2x-slim-VDDIO_CDC
+		 */
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		/*
+		 * supply vdd_l26, vdd_l27, vdd_l28
+		 */
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		pm8921_s8: s8 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 5f1a6b4b7644..09062b2ad8ba 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -213,12 +213,6 @@
 		};
 	};
 
-	sfpb_mutex: hwmutex {
-		compatible = "qcom,sfpb-mutex";
-		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
-		#hwlock-cells = <1>;
-	};
-
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_region>;
@@ -284,6 +278,40 @@
 		};
 	};
 
+	replicator {
+		compatible = "arm,coresight-static-replicator";
+
+		clocks = <&rpmcc RPM_QDSS_CLK>;
+		clock-names = "apb_pclk";
+
+		in-ports {
+			port {
+				replicator_in: endpoint {
+					remote-endpoint = <&funnel_out>;
+				};
+			};
+		};
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator_out0: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out1: endpoint {
+					remote-endpoint = <&tpiu_in>;
+				};
+			};
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -305,14 +333,16 @@
 			pinctrl-0 = <&ps_hold_default_state>;
 		};
 
-		sfpb_wrapper_mutex: syscon@1200000 {
-			compatible = "syscon";
-			reg = <0x01200000 0x8000>;
+		sfpb_mutex: hwmutex@1200600 {
+			compatible = "qcom,sfpb-mutex";
+			reg = <0x01200600 0x100>;
+			#hwlock-cells = <1>;
 		};
 
 		intc: interrupt-controller@2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x02000000 0x1000>,
 			      <0x02002000 0x1000>;
@@ -326,6 +356,8 @@
 				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <27000000>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
 			cpu-offset = <0x80000>;
 		};
 
@@ -405,8 +437,8 @@
 			};
 		};
 
-		sps_sic_non_secure: sps-sic-non-secure@12100000 {
-			compatible = "syscon";
+		sps_sic_non_secure: interrupt-controller@12100000 {
+			compatible = "qcom,apq8064-sps-sic", "syscon";
 			reg = <0x12100000 0x10000>;
 		};
 
@@ -737,7 +769,8 @@
 				 <&dsi0_phy 0>,
 				 <&dsi1_phy 1>,
 				 <&dsi1_phy 0>,
-				 <&hdmi_phy>;
+				 <&hdmi_phy>,
+				 <&mdp>;
 			clock-names = "pxo",
 				      "pll3",
 				      "pll8_vote",
@@ -745,7 +778,8 @@
 				      "dsi1pllbyte",
 				      "dsi2pll",
 				      "dsi2pllbyte",
-				      "hdmipll";
+				      "hdmipll",
+				      "lvdspll";
 		};
 
 		l2cc: clock-controller@2011000 {
@@ -1089,7 +1123,7 @@
 		};
 
 		mmss_sfpb: syscon@5700000 {
-			compatible = "syscon";
+			compatible = "qcom,apq8064-mmss-sfpb", "syscon";
 			reg = <0x5700000 0x70>;
 		};
 
@@ -1317,10 +1351,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 			clocks = <&gcc PCIE_A_CLK>,
 				 <&gcc PCIE_H_CLK>,
 				 <&gcc PCIE_PHY_REF_CLK>;
@@ -1404,13 +1438,19 @@
 				 <&mmcc MDP_AXI_CLK>,
 				 <&mmcc MDP_LUT_CLK>,
 				 <&mmcc HDMI_TV_CLK>,
-				 <&mmcc MDP_TV_CLK>;
+				 <&mmcc MDP_TV_CLK>,
+				 <&mmcc LVDS_CLK>,
+				 <&rpmcc RPM_PXO_CLK>;
 			clock-names = "core_clk",
 				      "iface_clk",
 				      "bus_clk",
 				      "lut_clk",
 				      "hdmi_clk",
-				      "tv_clk";
+				      "tv_clk",
+				      "lcdc_clk",
+				      "pxo";
+
+			#clock-cells = <0>;
 
 			iommus = <&mdp_port0 0
 				  &mdp_port0 2
@@ -1532,39 +1572,6 @@
 			};
 		};
 
-		replicator {
-			compatible = "arm,coresight-static-replicator";
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etb_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&funnel_out>;
-					};
-				};
-			};
-		};
-
 		funnel@1a04000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x1a04000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 6fce0112361f..34b0cf35fdac 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -149,7 +149,7 @@
 };
 
 &pm8941_gpios {
-        msm_keys_default: pm8941-gpio-keys-state {
+	msm_keys_default: pm8941-gpio-keys-state {
 		pins = "gpio5", "gpio23";
 		function = "normal";
 		input-enable;
@@ -157,7 +157,7 @@
 		bias-pull-up;
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 		power-source = <PM8941_GPIO_S3>; /* 1.8V */
-        };
+	};
 };
 
 &pm8941_lpg {
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
index a6d4390efa7c..be76bc39ac27 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi
@@ -251,7 +251,7 @@
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
 	nvmem-cells = <&precal_art_5000>;
-	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
+	qcom,calibration-variant = "ALFA-Network-AP120C-AC";
 };
 
 &usb3_hs_phy {
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
index 6640ea7b6acb..15baaf0d1529 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts
@@ -179,13 +179,13 @@
 &wifi0 {
 	status = "okay";
 
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+	qcom,calibration-variant = "8devices-Jalapeno";
 };
 
 &wifi1 {
 	status = "okay";
 
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+	qcom,calibration-variant = "8devices-Jalapeno";
 };
 
 &usb3_ss_phy {
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
index cc88cf5f0d9b..5a95a2d03c42 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi
@@ -43,7 +43,7 @@
 				       "gpio64", "gpio65", "gpio66",
 				       "gpio67", "gpio68", "gpio69";
 				function = "qpic";
-                        };
+			};
 		};
 
 		serial@78af000 {
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 06b20c196faf..8eeaab1c0be1 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -53,7 +53,6 @@
 			reg = <0x0>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -67,7 +66,6 @@
 			reg = <0x1>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -81,7 +79,6 @@
 			reg = <0x2>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -95,7 +92,6 @@
 			reg = <0x3>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -126,7 +122,7 @@
 		opp-716000000 {
 			opp-hz = /bits/ 64 <716000000>;
 			clock-latency-ns = <256000>;
- 		};
+		};
 	};
 
 	memory {
@@ -179,6 +175,7 @@
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0b000000 0x1000>,
 			<0x0b002000 0x1000>;
@@ -432,10 +429,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 			clocks = <&gcc GCC_PCIE_AHB_CLK>,
 				 <&gcc GCC_PCIE_AXI_M_CLK>,
 				 <&gcc GCC_PCIE_AXI_S_CLK>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 96e973501535..adedcc6da1da 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -527,6 +527,7 @@
 		intc: interrupt-controller@2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x02000000 0x1000>,
 			      <0x02002000 0x1000>;
@@ -1076,10 +1077,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_A_CLK>,
 				 <&gcc PCIE_H_CLK>,
@@ -1137,10 +1138,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_1_A_CLK>,
 				 <&gcc PCIE_1_H_CLK>,
@@ -1198,10 +1199,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_2_A_CLK>,
 				 <&gcc PCIE_2_H_CLK>,
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
index ca76bf8af75e..d4a32af0ef8f 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -8,7 +8,11 @@
  * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
  */
 
-#include "qcom-msm8226.dtsi"
+/*
+ * The .dts should first include qcom-msm8226.dtsi or msm8926.dtsi depending on
+ * the SoC on the given device.
+ */
+
 #include "pm8226.dtsi"
 #include <dt-bindings/input/input.h>
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
index 2c664b5934ec..f448c9088416 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "qcom-msm8226.dtsi"
 #include "qcom-msm8226-microsoft-common.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
index 731c5c375678..94bf3b1ad1bd 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "qcom-msm8226.dtsi"
 #include "qcom-msm8226-microsoft-common.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
index a28a83cb5340..d8cdb75dfbb8 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "qcom-msm8226.dtsi"
 #include "qcom-msm8226-microsoft-common.dtsi"
 
 /* This device has no magnetometer */
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
index a15a44fc0181..f1544a7e8369 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
@@ -3,11 +3,17 @@
  * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
  */
 
+/*
+ * The .dts should first include qcom-msm8226.dtsi or msm8926.dtsi depending on
+ * the SoC on the given device.
+ */
+
 #include <dt-bindings/input/input.h>
-#include "qcom-msm8226.dtsi"
 #include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
 /delete-node/ &smem_region;
 
 / {
@@ -145,12 +151,12 @@
 			no-map;
 		};
 
-		mpss@8400000 {
+		mpss_region: mpss@8400000 {
 			reg = <0x08400000 0x1f00000>;
 			no-map;
 		};
 
-		mba@a300000 {
+		mba_region: mba@a300000 {
 			reg = <0x0a300000 0x100000>;
 			no-map;
 		};
@@ -223,6 +229,13 @@
 	status = "okay";
 };
 
+&modem {
+	mx-supply = <&pm8226_l3>;
+	pll-supply = <&pm8226_l8>;
+
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
index 2ecc5983d365..80fe2916501a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
@@ -13,13 +13,37 @@
 	chassis-type = "handset";
 
 	aliases {
+		display0 = &framebuffer0;
 		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
 		mmc1 = &sdhc_2; /* SDC2 SD card slot */
 		serial0 = &blsp1_uart3;
 	};
 
 	chosen {
-		stdout-path = "serial0:115200n8";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			memory-region = <&cont_splash_region>;
+
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
 	};
 
 	gpio-hall-sensor {
@@ -93,6 +117,11 @@
 	};
 
 	reserved-memory {
+		cont_splash_region: cont-splash@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
 		smem_region: smem@fa00000 {
 			reg = <0x0fa00000 0x100000>;
 			no-map;
@@ -144,6 +173,8 @@
 
 		pinctrl-0 = <&tsp_int_default>;
 		pinctrl-names = "default";
+
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 64c8ac94f352..51a7a3fb36d8 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -213,6 +214,18 @@
 			no-map;
 		};
 
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
+			status = "disabled";
+		};
+
 		adsp_region: adsp@dc00000 {
 			reg = <0x0dc00000 0x1900000>;
 			no-map;
@@ -253,6 +266,65 @@
 		};
 	};
 
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		adsp_smsm: adsp@2 {
+			reg = <2>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@7 {
+			reg = <7>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -845,12 +917,96 @@
 			#interrupt-cells = <4>;
 		};
 
+		bam_dmux_dma: dma-controller@fc834000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xfc834000 0x7000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+		};
+
+		modem: remoteproc@fc880000 {
+			compatible = "qcom,msm8226-mss-pil";
+			reg = <0xfc880000 0x4040>,
+			      <0xfc820000 0x10000>;
+			reg-names = "qdsp6",
+				    "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			power-domains = <&rpmpd MSM8226_VDDCX>;
+			power-domain-names = "cx";
+
+			qcom,ext-bhs-reg = <&tcsr_regs_1 0x194>;
+			qcom,halt-regs = <&tcsr_regs_1 0x180 0x200 0x280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			memory-region = <&mba_region>, <&mpss_region>;
+
+			status = "disabled";
+
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&modem_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
 		tcsr_mutex: hwlock@fd484000 {
 			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
 			reg = <0xfd484000 0x1000>;
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs_1: syscon@fd485000 {
+			compatible = "qcom,tcsr-msm8226", "syscon";
+			reg = <0xfd485000 0x1000>;
+		};
+
 		tlmm: pinctrl@fd510000 {
 			compatible = "qcom,msm8226-pinctrl";
 			reg = <0xfd510000 0x4000>;
@@ -983,8 +1139,8 @@
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>;
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>;
 			clock-names = "xo",
 				      "mmss_gpll0_vote",
 				      "gpll0_vote",
@@ -1060,8 +1216,8 @@
 
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
 						  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
index 3037344eb240..cb571aa13c11 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
@@ -5,10 +5,12 @@
 
 /dts-v1/;
 
-#include "qcom-msm8226.dtsi"
+#include "msm8926.dtsi"
 #include "pm8226.dtsi"
 
 /delete-node/ &adsp_region;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
 /delete-node/ &smem_region;
 
 / {
@@ -193,6 +195,16 @@
 	/* TPS61310 Flash/Torch @ 33 */
 };
 
+&modem {
+	mx-supply = <&pm8226_l3>;
+	pll-supply = <&pm8226_l8>;
+	mss-supply = <&pm8226_s5>;
+
+	firmware-name = "qcom/msm8926/memul/mba.b00", "qcom/msm8926/memul/modem.mdt";
+
+	status = "okay";
+};
+
 &pm8226_vib {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
index 9b48661d69c5..eea4fd8cd972 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "msm8926.dtsi"
 #include "qcom-msm8226-microsoft-common.dtsi"
 
 /* This device has touchscreen on i2c3 instead */
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
index 55077a5f2e34..f23bbb94cc5e 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include "msm8926.dtsi"
 #include "qcom-msm8226-microsoft-common.dtsi"
 
 /* This device has touchscreen on i2c1 instead */
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
index 376a33125941..db3273c755c2 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -2,7 +2,7 @@
 
 /dts-v1/;
 
-#include "qcom-msm8226.dtsi"
+#include "msm8926.dtsi"
 #include "pm8226.dtsi"
 
 /delete-node/ &smem_region;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
index d0e1bc39f8ef..73e19176eb97 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include "msm8926.dtsi"
 #include "qcom-msm8226-samsung-matisse-common.dtsi"
 
 / {
@@ -27,6 +28,10 @@
 	};
 };
 
+&modem {
+	mss-supply = <&pm8226_s5>;
+};
+
 &tlmm {
 	tsp_en1_default_state: tsp-en1-default-state {
 		pins = "gpio32";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 36f4c997b0b3..1df078d7d89b 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -19,7 +19,7 @@
 	ext_l2: gpio-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ext_l2";
-		gpio = <&msmgpio 91 0>;
+		gpio = <&tlmm 91 0>;
 		startup-delay-us = <10000>;
 		enable-active-high;
 	};
@@ -38,12 +38,12 @@
 	ethernet@0 {
 		compatible = "micrel,ks8851";
 		reg = <0>;
-		interrupt-parent = <&msmgpio>;
+		interrupt-parent = <&tlmm>;
 		interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
 		spi-max-frequency = <5400000>;
 		vdd-supply = <&ext_l2>;
 		vdd-io-supply = <&pm8921_lvs6>;
-		reset-gpios = <&msmgpio 89 0>;
+		reset-gpios = <&tlmm 89 0>;
 	};
 };
 
@@ -56,7 +56,7 @@
 	status = "okay";
 };
 
-&msmgpio {
+&tlmm {
 	spi1_default: spi1-default-state {
 		 mosi-pins {
 			pins = "gpio6";
@@ -90,7 +90,7 @@
 };
 
 &pm8921 {
-	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &pm8921_keypad {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
deleted file mode 100644
index 4fa982771288..000000000000
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-&msmgpio {
-	i2c3_default_state: i2c3-default-state {
-		i2c3-pins {
-			pins = "gpio16", "gpio17";
-			function = "gsbi3";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	i2c3_sleep_state: i2c3-sleep-state {
-		i2c3-pins {
-			pins = "gpio16", "gpio17";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-bus-hold;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index af6cc6393d74..5ee919dce75b 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -31,7 +31,7 @@
 
 		key-home {
 			label = "Home";
-			gpios = <&msmgpio 40 GPIO_ACTIVE_LOW>;
+			gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
 			debounce-interval = <5>;
 			linux,code = <KEY_HOMEPAGE>;
 			wakeup-event-action = <EV_ACT_ASSERTED>;
@@ -40,14 +40,14 @@
 
 		key-volume-up {
 			label = "Volume Up";
-			gpios = <&msmgpio 50 GPIO_ACTIVE_LOW>;
+			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
 			debounce-interval = <5>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
 		key-volume-down {
 			label = "Volume Down";
-			gpios = <&msmgpio 81 GPIO_ACTIVE_LOW>;
+			gpios = <&tlmm 81 GPIO_ACTIVE_LOW>;
 			debounce-interval = <5>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
@@ -71,6 +71,11 @@
 &sdcc3 {
 	vmmc-supply = <&pm8921_l6>;
 	vqmmc-supply = <&pm8921_l7>;
+
+	pinctrl-0 = <&sdcc3_default_state>;
+	pinctrl-1 = <&sdcc3_sleep_state>;
+	pinctrl-names = "default", "sleep";
+
 	status = "okay";
 };
 
@@ -97,7 +102,7 @@
 	touchscreen@4a {
 		compatible = "atmel,maxtouch";
 		reg = <0x4a>;
-		interrupt-parent = <&msmgpio>;
+		interrupt-parent = <&tlmm>;
 		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		vdda-supply = <&pm8921_lvs6>;
 		vdd-supply = <&pm8921_l17>;
@@ -106,7 +111,7 @@
 	};
 };
 
-&msmgpio {
+&tlmm {
 	spi1_default: spi1-default-state {
 		mosi-pins {
 			pins = "gpio6";
@@ -155,7 +160,7 @@
 };
 
 &pm8921 {
-	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &rpm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
new file mode 100644
index 000000000000..591dc837e600
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2025, Antony Kurniawan Soemardi <linux@smankusors.com>
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+
+#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "Sony Xperia SP";
+	compatible = "sony,huashan", "qcom,msm8960t", "qcom,msm8960";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi8_serial;
+		mmc0 = &sdcc1; /* SDCC1 eMMC slot */
+		mmc1 = &sdcc3; /* SDCC3 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8921_gpio 21 GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8921_gpio 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&gsbi8 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi8_serial {
+	status = "okay";
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_gpio {
+	keypad_default_state: keypad-default-state {
+		keypad-sense-pins {
+			pins = "gpio1", "gpio2", "gpio3", "gpio4", "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			bias-pull-up;
+			input-enable;
+			power-source = <PM8921_GPIO_S4>;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_31P5>;
+		};
+
+		keypad-drive-pins {
+			pins = "gpio9", "gpio10";
+			function = PMIC_GPIO_FUNC_FUNC1;
+			bias-disable;
+			drive-open-drain;
+			output-low;
+			power-source = <PM8921_GPIO_S4>;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		};
+	};
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(1, 0, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(1, 1, KEY_CAMERA)
+	>;
+	keypad,num-rows = <2>;
+	keypad,num-columns = <5>;
+
+	pinctrl-0 = <&keypad_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+		vdd_ncp-supply = <&pm8921_l6>;
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l21_l23_l29-supply = <&pm8921_s8>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+		vdd_l29-supply = <&pm8921_s8>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s8: s8 {
+			regulator-always-on;
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8921_l1: l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l7: l7 {
+			regulator-always-on;
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l9: l9 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l12: l12 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l16: l16 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l17: l17 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l21: l21 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	status = "okay";
+};
+
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	vqmmc-supply = <&pm8921_l7>;
+
+	pinctrl-0 = <&sdcc3_default_state>;
+	pinctrl-1 = <&sdcc3_sleep_state>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 865fe7cc3951..38bd4fd8dda5 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -15,16 +15,45 @@
 	compatible = "qcom,msm8960";
 	interrupt-parent = <&intc>;
 
+	clocks {
+		cxo_board: cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
+		};
+
+		pxo_board: pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		qcom,no-pc-write;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		interrupts = <GIC_PPI 14 0x304>;
+		interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 
 		cpu@0 {
 			compatible = "qcom,krait";
+			reg = <0>;
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
-			reg = <0>;
 			next-level-cache = <&l2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
@@ -32,9 +61,9 @@
 
 		cpu@1 {
 			compatible = "qcom,krait";
+			reg = <1>;
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
-			reg = <1>;
 			next-level-cache = <&l2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
@@ -52,134 +81,231 @@
 		reg = <0x80000000 0>;
 	};
 
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 10 0x304>;
-		qcom,no-pc-write;
-	};
+	soc: soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-	clocks {
-		cxo_board: cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-			clock-output-names = "cxo_board";
-		};
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-msm8960";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
 
-		pxo_board: pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-			clock-output-names = "pxo_board";
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack",
+					  "err",
+					  "wakeup";
 		};
 
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "sleep_clk";
+		ssbi: ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
 		};
-	};
 
-	/* Temporary fixed regulator */
-	vsdcc_fixed: vsdcc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "SDCC Power";
-		regulator-min-microvolt = <2700000>;
-		regulator-max-microvolt = <2700000>;
-		regulator-always-on;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
+		qfprom: efuse@700000 {
+			compatible = "qcom,msm8960-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
+			tsens_calib: calib@404 {
+				reg = <0x404 0x10>;
+			};
 
-		timer@200a000 {
-			compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
-				     "qcom,msm-timer";
-			interrupts = <GIC_PPI 1 0x301>,
-				     <GIC_PPI 2 0x301>,
-				     <GIC_PPI 3 0x301>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>;
-			cpu-offset = <0x80000>;
+			tsens_backup: backup-calib@414 {
+				reg = <0x414 0x10>;
+			};
 		};
 
-		msmgpio: pinctrl@800000 {
+		tlmm: pinctrl@800000 {
 			compatible = "qcom,msm8960-pinctrl";
+			reg = <0x800000 0x4000>;
 			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 152>;
+			gpio-ranges = <&tlmm 0 0 152>;
 			#gpio-cells = <2>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0x800000 0x4000>;
+
+			i2c1_default_state: i2c1-default-state {
+				i2c1-pins {
+					pins = "gpio8", "gpio9";
+					function = "gsbi1";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c1_sleep_state: i2c1-sleep-state {
+				i2c1-pins {
+					pins = "gpio8", "gpio9";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
+			i2c3_default_state: i2c3-default-state {
+				i2c3-pins {
+					pins = "gpio16", "gpio17";
+					function = "gsbi3";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c3_sleep_state: i2c3-sleep-state {
+				i2c3-pins {
+					pins = "gpio16", "gpio17";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
+			i2c8_default_state: i2c8-default-state {
+				i2c8-pins {
+					pins = "gpio36", "gpio37";
+					function = "gsbi8";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c8_sleep_state: i2c8-sleep-state {
+				i2c8-pins {
+					pins = "gpio36", "gpio37";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
+			i2c10_default_state: i2c10-default-state {
+				i2c10-pins {
+					pins = "gpio73", "gpio74";
+					function = "gsbi10";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c10_sleep_state: i2c10-sleep-state {
+				i2c10-pins {
+					pins = "gpio73", "gpio74";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
+			i2c12_default_state: i2c12-default-state {
+				i2c12-pins {
+					pins = "gpio44", "gpio45";
+					function = "gsbi12";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c12_sleep_state: i2c12-sleep-state {
+				i2c12-pins {
+					pins = "gpio44", "gpio45";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
+			sdcc3_default_state: sdcc3-default-state {
+				clk-pins {
+					pins = "sdc3_clk";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc3_cmd";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc3_data";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			sdcc3_sleep_state: sdcc3-sleep-state {
+				clk-pins {
+					pins = "sdc3_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc3_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc3_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-msm8960";
+			compatible = "qcom,gcc-msm8960", "syscon";
+			reg = <0x900000 0x4000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
 			clocks = <&cxo_board>,
 				 <&pxo_board>,
 				 <&lcc PLL4>;
-			clock-names = "cxo", "pxo", "pll4";
+			clock-names = "cxo",
+				      "pxo",
+				      "pll4";
+
+			tsens: thermal-sensor {
+				compatible = "qcom,msm8960-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <5>;
+				#thermal-sensor-cells = <1>;
+			};
 		};
 
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-msm8960";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			clocks = <&pxo_board>,
-				 <&gcc PLL4_VOTE>,
-				 <0>,
-				 <0>, <0>,
-				 <0>, <0>,
-				 <0>;
-			clock-names = "pxo",
-				      "pll4_vote",
-				      "mi2s_codec_clk",
-				      "codec_i2s_mic_codec_clk",
-				      "spare_i2s_mic_codec_clk",
-				      "codec_i2s_spkr_codec_clk",
-				      "spare_i2s_spkr_codec_clk",
-				      "pcm_codec_clk";
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 
-		clock-controller@4000000 {
-			compatible = "qcom,mmcc-msm8960";
-			reg = <0x4000000 0x1000>;
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			clocks = <&pxo_board>,
-				 <&gcc PLL3>,
-				 <&gcc PLL8_VOTE>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
-			clock-names = "pxo",
-				      "pll3",
-				      "pll8_vote",
-				      "dsi1pll",
-				      "dsi1pllbyte",
-				      "dsi2pll",
-				      "dsi2pllbyte",
-				      "hdmipll";
+		timer@200a000 {
+			compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			reg = <0x0200a000 0x100>;
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+			clock-frequency = <27000000>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
+			cpu-offset = <0x80000>;
 		};
 
 		l2cc: clock-controller@2011000 {
@@ -190,17 +316,6 @@
 			#clock-cells = <0>;
 		};
 
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-msm8960";
-			reg = <0x108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ack", "err", "wakeup";
-		};
-
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
@@ -210,15 +325,6 @@
 			#clock-cells = <0>;
 		};
 
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu1_aux";
-			#clock-cells = <0>;
-		};
-
 		saw0: power-manager@2089000 {
 			compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
@@ -229,6 +335,15 @@
 			};
 		};
 
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
+		};
+
 		saw1: power-manager@2099000 {
 			compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
@@ -239,47 +354,34 @@
 			};
 		};
 
-		gsbi5: gsbi@16400000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x16400000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi5_serial: serial@16440000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16440000 0x1000>,
-				      <0x16400000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		ssbi: ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
+		clock-controller@4000000 {
+			compatible = "qcom,mmcc-msm8960";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll";
 		};
 
 		sdcc3: mmc@12180000 {
 			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x12180000 0x2000>;
 			arm,primecell-periphid = <0x00051180>;
-			status = "disabled";
-			reg = <0x12180000 0x8000>;
 			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 			clock-names = "mclk", "apb_pclk";
@@ -289,13 +391,26 @@
 			max-frequency = <192000000>;
 			no-1-8-v;
 			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+			dma-names = "tx", "rx";
+
+			status = "disabled";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x4000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
 		};
 
 		sdcc1: mmc@12400000 {
-			status = "disabled";
 			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x12400000 0x2000>;
 			arm,primecell-periphid = <0x00051180>;
-			reg = <0x12400000 0x8000>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 			clock-names = "mclk", "apb_pclk";
@@ -305,33 +420,48 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+
+			status = "disabled";
 		};
 
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-msm8960", "syscon";
-			reg = <0x1a400000 0x100>;
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x4000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
 		};
 
-		gsbi1: gsbi@16000000 {
+		gsbi12: gsbi@12480000 {
 			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <1>;
-			reg = <0x16000000 0x100>;
-			clocks = <&gcc GSBI1_H_CLK>;
+			reg = <0x12480000 0x100>;
+			ranges;
+			cell-index = <12>;
+			clocks = <&gcc GSBI12_H_CLK>;
 			clock-names = "iface";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
 
-			gsbi1_spi: spi@16080000 {
-				compatible = "qcom,spi-qup-v1.1.1";
+			status = "disabled";
+
+			gsbi12_i2c: i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				pinctrl-0 = <&i2c12_default_state>;
+				pinctrl-1 = <&i2c12_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI12_QUP_CLK>,
+					 <&gcc GSBI12_H_CLK>;
+				clock-names = "core",
+					      "iface";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				reg = <0x16080000 0x1000>;
-				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-				cs-gpios = <&msmgpio 8 0>;
 
-				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
 				status = "disabled";
 			};
 		};
@@ -352,6 +482,7 @@
 			phys = <&usb_hs1_phy>;
 			phy-names = "usb-phy";
 			#reset-cells = <1>;
+
 			status = "disabled";
 
 			ulpi {
@@ -367,6 +498,51 @@
 			};
 		};
 
+		gsbi1: gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16000000 0x100>;
+			ranges;
+			cell-index = <1>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			gsbi1_i2c: i2c@16080000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16080000 0x1000>;
+				pinctrl-0 = <&i2c1_default_state>;
+				pinctrl-1 = <&i2c1_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>,
+					 <&gcc GSBI1_H_CLK>;
+				clock-names = "core",
+					      "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			gsbi1_spi: spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x16080000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				cs-gpios = <&tlmm 8 0>;
+				clocks = <&gcc GSBI1_QUP_CLK>,
+					 <&gcc GSBI1_H_CLK>;
+				clock-names = "core",
+					      "iface";
+
+				status = "disabled";
+			};
+		};
+
 		gsbi3: gsbi@16200000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			reg = <0x16200000 0x100>;
@@ -376,6 +552,7 @@
 			clock-names = "iface";
 			#address-cells = <1>;
 			#size-cells = <1>;
+
 			status = "disabled";
 
 			gsbi3_i2c: i2c@16280000 {
@@ -387,12 +564,200 @@
 				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI3_QUP_CLK>,
 					 <&gcc GSBI3_H_CLK>;
-				clock-names = "core", "iface";
+				clock-names = "core",
+					      "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16400000 0x100>;
+			ranges;
+			cell-index = <5>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>,
+					 <&gcc GSBI5_H_CLK>;
+				clock-names = "core",
+					      "iface";
+
+				status = "disabled";
+			};
+		};
+
+		gsbi8: gsbi@1a000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x1a000000 0x100>;
+			ranges;
+			cell-index = <8>;
+			clocks = <&gcc GSBI8_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi8_serial: serial@1a040000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a040000 0x1000>,
+				      <0x1a000000 0x1000>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI8_UART_CLK>,
+					 <&gcc GSBI8_H_CLK>;
+				clock-names = "core",
+					      "iface";
+
+				status = "disabled";
+			};
+
+			gsbi8_i2c: i2c@1a080000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x1a080000 0x1000>;
+				pinctrl-0 = <&i2c8_default_state>;
+				pinctrl-1 = <&i2c8_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI8_QUP_CLK>,
+					 <&gcc GSBI8_H_CLK>;
+				clock-names = "core",
+					      "iface";
 				#address-cells = <1>;
 				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gsbi10: gsbi@1a200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x1a200000 0x100>;
+			ranges;
+			cell-index = <10>;
+			clocks = <&gcc GSBI10_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			gsbi10_i2c: i2c@1a280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				pinctrl-0 = <&i2c10_default_state>;
+				pinctrl-1 = <&i2c10_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI10_QUP_CLK>,
+					 <&gcc GSBI10_H_CLK>;
+				clock-names = "core",
+					      "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				status = "disabled";
 			};
 		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-msm8960", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-msm8960";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <95000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
 	};
 };
-#include "qcom-msm8960-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 261044fdfee8..b3127f0383cf 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -12,6 +12,7 @@
 	chassis-type = "handset";
 
 	aliases {
+		mmc0 = &sdhc_1;
 		serial0 = &blsp1_uart1;
 		serial1 = &blsp2_uart4;
 	};
@@ -598,7 +599,7 @@
 	pinctrl-0 = <&sdc2_on>;
 	pinctrl-1 = <&sdc2_off>;
 
-	bcrmf@1 {
+	wifi@1 {
 		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
index 903bb4d12513..b7a1367d3470 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
@@ -50,6 +50,34 @@
 		};
 	};
 
+	i2c-touchkey {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&i2c_touchkey_pins>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "cypress,midas-touchkey";
+			reg = <0x20>;
+
+			interrupts-extended = <&pm8941_gpios 29 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-0 = <&touchkey_pin>;
+			pinctrl-names = "default";
+
+			vcc-supply = <&pm8941_lvs3>;
+			vdd-supply = <&pm8941_l13>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+		};
+	};
+
 	touch_ldo: regulator-touch {
 		compatible = "regulator-fixed";
 		regulator-name = "touch-ldo";
@@ -149,6 +177,14 @@
 		power-source = <PM8941_GPIO_S3>;
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
 	};
+
+	touchkey_pin: touchkey-int-state {
+		pins = "gpio29";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
 };
 
 &remoteproc_adsp {
@@ -332,6 +368,9 @@
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 		};
+
+		pm8941_lvs1: lvs1 {};
+		pm8941_lvs3: lvs3 {};
 	};
 };
 
@@ -378,6 +417,12 @@
 		drive-strength = <8>;
 		bias-disable;
 	};
+
+	i2c_touchkey_pins: i2c-touchkey-state {
+		pins = "gpio95", "gpio96";
+		function = "gpio";
+		bias-pull-up;
+	};
 };
 
 &usb {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts
index 9f2ab5c122d0..472a45408add 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts
@@ -5,6 +5,22 @@
 	model = "Sony Xperia Z1 Compact";
 	compatible = "sony,xperia-amami", "qcom,msm8974";
 	chassis-type = "handset";
+
+	gpio-keys {
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+	};
 };
 
 &smbb {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts
index 9028f17e5c4a..c3d69641fc1d 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts
@@ -5,4 +5,20 @@
 	model = "Sony Xperia Z1";
 	compatible = "sony,xperia-honami", "qcom,msm8974";
 	chassis-type = "handset";
+
+	gpio-keys {
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-togari.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-togari.dts
new file mode 100644
index 000000000000..f60f7304d35e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-togari.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/* Togari uses a different touchscreen compared to other rhine devices */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Sony Xperia Z Ultra";
+	compatible = "sony,xperia-togari", "qcom,msm8974";
+	chassis-type = "handset";
+};
+
+&pm8941_l23 {
+	regulator-min-microvolt = <2600000>;
+	regulator-max-microvolt = <2600000>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index d34659ebac22..d7322fc6a095 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -8,6 +8,8 @@
 
 / {
 	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
 		serial0 = &blsp1_uart2;
 	};
 
@@ -28,20 +30,6 @@
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		key-camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		key-camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
 		key-volume-up {
 			label = "volume_up";
 			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
@@ -98,7 +86,7 @@
 	status = "okay";
 	clock-frequency = <355000>;
 
-	synaptics@2c {
+	touchscreen: synaptics@2c {
 		compatible = "syna,rmi4-i2c";
 		reg = <0x2c>;
 
@@ -446,6 +434,8 @@
 };
 
 &smbb {
+	usb-charge-current-limit = <1800000>;
+
 	qcom,fast-charge-safe-current = <1500000>;
 	qcom,fast-charge-current-limit = <1500000>;
 	qcom,dc-current-limit = <1800000>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index e3f9c56a778c..7e119370f337 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/interconnect/qcom,msm8974.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -1871,10 +1872,10 @@
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1961,8 +1962,10 @@
 				interrupt-parent = <&mdss>;
 				interrupts = <4>;
 
-				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
@@ -2032,8 +2035,10 @@
 				interrupt-parent = <&mdss>;
 				interrupts = <4>;
 
-				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+						  <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index 4c8edadea0ac..88ff6535477b 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -13,6 +13,7 @@
 	qcom,board-id = <8 0>;
 
 	aliases {
+		mmc0 = &sdhc_1;
 		serial0 = &blsp1_uart2;
 	};
 
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index d0f6120b665d..05b79281df57 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -57,7 +57,7 @@
 			enable-method = "psci";
 			clocks = <&apcs>;
 			power-domains = <&rpmhpd SDX55_CX>;
-			power-domain-names = "rpmhpd";
+			power-domain-names = "perf";
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
@@ -340,10 +340,10 @@
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,
@@ -427,8 +427,9 @@
 			interrupt-names = "global",
 					  "doorbell";
 
-			interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>;
-			interconnect-names = "pcie-mem";
+			interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>,
+					<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			resets = <&gcc GCC_PCIE_BCR>;
 			reset-names = "core";
@@ -613,6 +614,8 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -704,6 +707,7 @@
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
 			interrupt-parent = <&intc>;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x17800000 0x1000>,
 			      <0x17802000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index 3bc67bb8c1eb..c8e312dcd26b 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -58,7 +58,7 @@
 			enable-method = "psci";
 			clocks = <&apcs>;
 			power-domains = <&rpmhpd SDX65_CX_AO>;
-			power-domain-names = "rpmhpd";
+			power-domain-names = "perf";
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
@@ -335,6 +335,10 @@
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "global", "doorbell";
 
+			interconnects = <&system_noc MASTER_PCIE_0 &mc_virt SLAVE_EBI1>,
+					<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_PCIE_0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
 			resets = <&gcc GCC_PCIE_BCR>;
 			reset-names = "core";
 
@@ -526,6 +530,8 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
diff --git a/arch/arm/boot/dts/renesas/Makefile b/arch/arm/boot/dts/renesas/Makefile
index 833a02447ecf..947c7fe02803 100644
--- a/arch/arm/boot/dts/renesas/Makefile
+++ b/arch/arm/boot/dts/renesas/Makefile
@@ -30,4 +30,5 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \
 	r9a06g032-rzn1d400-db.dtb \
+	r9a06g032-rzn1d400-eb.dtb \
 	sh73a0-kzm9g.dtb
diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
index c81840dfb7da..3c3756509714 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
@@ -203,6 +203,7 @@
 };
 
 &ostm0 {
+	bootph-all;
 	status = "okay";
 };
 
@@ -258,6 +259,7 @@
 	};
 
 	scif2_pins: serial2 {
+		bootph-all;
 		/* P3_0 as TxD2; P3_2 as RxD2 */
 		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
 	};
@@ -286,7 +288,7 @@
 &scif2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&scif2_pins>;
-
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
index 9d29861f23f1..23ddec217685 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
@@ -59,6 +59,7 @@
 
 &pinctrl {
 	scif2_pins: serial2 {
+		bootph-all;
 		/* P6_2 as RxD2; P6_3 as TxD2 */
 		pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
 	};
@@ -99,6 +100,7 @@
 };
 
 &ostm0 {
+	bootph-all;
 	status = "okay";
 };
 
@@ -109,7 +111,7 @@
 &scif2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&scif2_pins>;
-
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
index 25c6d0c78828..91178fb9e721 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
@@ -199,6 +199,7 @@
 
 	/* Serial Console */
 	scif2_pins: serial2 {
+		bootph-all;
 		pinmux = <RZA1_PINMUX(3, 0, 6)>,	/* TxD2 */
 			 <RZA1_PINMUX(3, 2, 4)>;	/* RxD2 */
 	};
@@ -264,6 +265,7 @@
 };
 
 &ostm0 {
+	bootph-all;
 	status = "okay";
 };
 
@@ -278,6 +280,7 @@
 &scif2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&scif2_pins>;
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/renesas/r7s72100.dtsi b/arch/arm/boot/dts/renesas/r7s72100.dtsi
index b831bbc431ef..245c26bb8e03 100644
--- a/arch/arm/boot/dts/renesas/r7s72100.dtsi
+++ b/arch/arm/boot/dts/renesas/r7s72100.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r7s72100";
 	#address-cells = <1>;
 	#size-cells = <1>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		i2c0 = &i2c0;
@@ -41,6 +42,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0x18000000>;
+		bootph-all;
 	};
 
 	cpus {
@@ -83,7 +85,7 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts-extended = <&gic GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	rtc_x1_clk: rtc_x1 {
@@ -102,11 +104,11 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
+		bootph-all;
 
 		L2: cache-controller@3ffff000 {
 			compatible = "arm,pl310-cache";
@@ -238,6 +240,8 @@
 				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
+			dmas = <&dmac 0x2d21>, <&dmac 0x2d22>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
 			num-cs = <1>;
 			#address-cells = <1>;
@@ -253,6 +257,8 @@
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
+			dmas = <&dmac 0x2d25>, <&dmac 0x2d26>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
 			num-cs = <1>;
 			#address-cells = <1>;
@@ -268,6 +274,8 @@
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
+			dmas = <&dmac 0x2d29>, <&dmac 0x2d2a>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
 			num-cs = <1>;
 			#address-cells = <1>;
@@ -283,6 +291,8 @@
 				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
+			dmas = <&dmac 0x2d2d>, <&dmac 0x2d2e>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
 			num-cs = <1>;
 			#address-cells = <1>;
@@ -298,6 +308,8 @@
 				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error", "rx", "tx";
 			clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
+			dmas = <&dmac 0x2d31>, <&dmac 0x2d32>;
+			dma-names = "tx", "rx";
 			power-domains = <&cpg_clocks>;
 			num-cs = <1>;
 			#address-cells = <1>;
@@ -547,6 +559,7 @@
 
 		pinctrl: pinctrl@fcfe3000 {
 			compatible = "renesas,r7s72100-ports";
+			bootph-all;
 
 			reg = <0xfcfe3000 0x4230>;
 
diff --git a/arch/arm/boot/dts/renesas/r7s9210.dtsi b/arch/arm/boot/dts/renesas/r7s9210.dtsi
index fdeb0bc12cb7..2b349b51003b 100644
--- a/arch/arm/boot/dts/renesas/r7s9210.dtsi
+++ b/arch/arm/boot/dts/renesas/r7s9210.dtsi
@@ -52,7 +52,6 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/renesas/r8a7742.dtsi b/arch/arm/boot/dts/renesas/r8a7742.dtsi
index 9083d288cc33..4220b2349b40 100644
--- a/arch/arm/boot/dts/renesas/r8a7742.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7742.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r8a7742";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -208,19 +209,19 @@
 
 	pmu-0 {
 		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 	};
 
 	pmu-1 {
 		compatible = "arm,cortex-a7-pmu";
-		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
 	};
 
@@ -234,7 +235,6 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -1932,10 +1932,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm/boot/dts/renesas/r8a7743.dtsi b/arch/arm/boot/dts/renesas/r8a7743.dtsi
index 58a06cf37784..c697942387e1 100644
--- a/arch/arm/boot/dts/renesas/r8a7743.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7743.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r8a7743";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -115,8 +116,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
@@ -130,7 +131,6 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -1841,10 +1841,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm/boot/dts/renesas/r8a7744.dtsi b/arch/arm/boot/dts/renesas/r8a7744.dtsi
index 034244648d18..fed46345807c 100644
--- a/arch/arm/boot/dts/renesas/r8a7744.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7744.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r8a7744";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -115,8 +116,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
@@ -130,7 +131,6 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -1827,10 +1827,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm/boot/dts/renesas/r8a7745.dtsi b/arch/arm/boot/dts/renesas/r8a7745.dtsi
index 704fa6f3cbd0..5424a73562dd 100644
--- a/arch/arm/boot/dts/renesas/r8a7745.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7745.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r8a7745";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		i2c0 = &i2c0;
@@ -105,8 +106,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
-		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
@@ -120,7 +121,6 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -1631,10 +1631,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm/boot/dts/renesas/r8a77470.dtsi b/arch/arm/boot/dts/renesas/r8a77470.dtsi
index a8a12275c98a..c61790e7667f 100644
--- a/arch/arm/boot/dts/renesas/r8a77470.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a77470.dtsi
@@ -13,6 +13,7 @@
 	compatible = "renesas,r8a77470";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		i2c0 = &i2c0;
@@ -66,8 +67,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
-		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
@@ -81,7 +82,6 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -1057,10 +1057,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
index 3bce5876a9d8..4f002aa7fbaf 100644
--- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
@@ -754,6 +754,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
index d7c0a9574ce8..b1e20579e071 100644
--- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
@@ -268,6 +268,7 @@
 &scifa0 {
 	pinctrl-0 = <&scifa0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7790.dtsi b/arch/arm/boot/dts/renesas/r8a7790.dtsi
index f746f0b9e686..12cce9bdc449 100644
--- a/arch/arm/boot/dts/renesas/r8a7790.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7790.dtsi
@@ -16,6 +16,7 @@
 	compatible = "renesas,r8a7790";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		i2c0 = &i2c0;
@@ -227,6 +228,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -238,19 +240,19 @@
 
 	pmu-0 {
 		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 	};
 
 	pmu-1 {
 		compatible = "arm,cortex-a7-pmu";
-		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
 	};
 
@@ -264,7 +266,7 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -374,6 +376,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7790";
 			reg = <0 0xe6060000 0 0x250>;
+			bootph-all;
 		};
 
 		tpu: pwm@e60f0000 {
@@ -395,6 +398,7 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		apmu@e6151000 {
@@ -412,6 +416,7 @@
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7790-rst";
 			reg = <0 0xe6160000 0 0x0100>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1948,6 +1953,7 @@
 		prr: chipid@ff000044 {
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
+			bootph-all;
 		};
 
 		cmt0: timer@ffca0000 {
@@ -2006,10 +2012,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
@@ -2018,5 +2024,6 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
+		bootph-all;
 	};
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
index e4e1d9c98c61..61ea438eb6af 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
@@ -301,6 +301,16 @@
 		clock-frequency = <12000000>;
 	};
 
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
 	hdmi-out {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -383,13 +393,25 @@
 		};
 
 		composite-in@20 {
-			compatible = "adi,adv7180";
+			compatible = "adi,adv7180cp";
 			reg = <0x20>;
 
-			port {
-				adv7180: endpoint {
-					bus-width = <8>;
-					remote-endpoint = <&vin1ep>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7180_in: endpoint {
+						remote-endpoint = <&composite_con_in>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					adv7180_out: endpoint {
+						remote-endpoint = <&vin1ep>;
+					};
 				};
 			};
 		};
@@ -679,6 +701,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -899,7 +922,7 @@
 
 	port {
 		vin1ep: endpoint {
-			remote-endpoint = <&adv7180>;
+			remote-endpoint = <&adv7180_out>;
 			bus-width = <8>;
 		};
 	};
diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index 08381498350a..81b3c5d74e9b 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -289,7 +289,7 @@
 	};
 
 	can0_pins: can0 {
-		groups = "can0_data";
+		groups = "can0_data_b";
 		function = "can0";
 	};
 
@@ -312,6 +312,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7791.dtsi b/arch/arm/boot/dts/renesas/r8a7791.dtsi
index e57567adff55..35313e8da426 100644
--- a/arch/arm/boot/dts/renesas/r8a7791.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7791.dtsi
@@ -16,6 +16,7 @@
 	compatible = "renesas,r8a7791";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		i2c0 = &i2c0;
@@ -125,6 +126,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -136,8 +138,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
@@ -151,7 +153,7 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -291,6 +293,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7791";
 			reg = <0 0xe6060000 0 0x250>;
+			bootph-all;
 		};
 
 		tpu: pwm@e60f0000 {
@@ -312,6 +315,7 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		apmu@e6152000 {
@@ -323,6 +327,7 @@
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7791-rst";
 			reg = <0 0xe6160000 0 0x0100>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1875,6 +1880,7 @@
 		prr: chipid@ff000044 {
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
+			bootph-all;
 		};
 
 		cmt0: timer@ffca0000 {
@@ -1933,10 +1939,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
@@ -1945,5 +1951,6 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
+		bootph-all;
 	};
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
index a3986076d8e3..23ec0f8a6651 100644
--- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
@@ -301,6 +301,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
index bfc780f7e396..93bd81723c8f 100644
--- a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts
@@ -183,6 +183,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7792.dtsi b/arch/arm/boot/dts/renesas/r8a7792.dtsi
index 08cbe6c13cee..9e0de69ac3a3 100644
--- a/arch/arm/boot/dts/renesas/r8a7792.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7792.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r8a7792";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		i2c0 = &i2c0;
@@ -82,6 +83,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	lbsc: bus {
@@ -93,8 +95,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
@@ -108,7 +110,7 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -308,6 +310,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7792";
 			reg = <0 0xe6060000 0 0x144>;
+			bootph-all;
 		};
 
 		cpg: clock-controller@e6150000 {
@@ -318,6 +321,7 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		apmu@e6152000 {
@@ -329,6 +333,7 @@
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7792-rst";
 			reg = <0 0xe6160000 0 0x0100>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -947,6 +952,7 @@
 		prr: chipid@ff000044 {
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
+			bootph-all;
 		};
 
 		cmt0: timer@ffca0000 {
@@ -986,10 +992,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
index 2c05d7c2b377..5c6928c941ac 100644
--- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
@@ -373,7 +373,6 @@
 				port@3 {
 					reg = <3>;
 					adv7180_out: endpoint {
-						bus-width = <8>;
 						remote-endpoint = <&vin1ep>;
 					};
 				};
@@ -642,6 +641,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7793.dtsi b/arch/arm/boot/dts/renesas/r8a7793.dtsi
index e48e43cc6b03..1ad50070a1a7 100644
--- a/arch/arm/boot/dts/renesas/r8a7793.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7793.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r8a7793";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		i2c0 = &i2c0;
@@ -117,12 +118,13 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
@@ -136,7 +138,7 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -276,6 +278,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7793";
 			reg = <0 0xe6060000 0 0x250>;
+			bootph-all;
 		};
 
 		/* Special CPG clocks */
@@ -287,6 +290,7 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		apmu@e6152000 {
@@ -298,6 +302,7 @@
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7793-rst";
 			reg = <0 0xe6160000 0 0x0100>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1454,6 +1459,7 @@
 		prr: chipid@ff000044 {
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
+			bootph-all;
 		};
 
 		cmt0: timer@ffca0000 {
@@ -1512,10 +1518,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
@@ -1524,5 +1530,6 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
+		bootph-all;
 	};
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
index f70e26aa83a0..3f06a7f67d62 100644
--- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
@@ -479,6 +479,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
index 2a0819311a3c..342825605768 100644
--- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
@@ -394,6 +394,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/renesas/r8a7794.dtsi b/arch/arm/boot/dts/renesas/r8a7794.dtsi
index bc16c896c0f9..7669a67377c9 100644
--- a/arch/arm/boot/dts/renesas/r8a7794.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7794.dtsi
@@ -15,6 +15,7 @@
 	compatible = "renesas,r8a7794";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		i2c0 = &i2c0;
@@ -99,12 +100,13 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
-		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
@@ -118,7 +120,7 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -243,6 +245,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7794";
 			reg = <0 0xe6060000 0 0x11c>;
+			bootph-all;
 		};
 
 		cpg: clock-controller@e6150000 {
@@ -253,6 +256,7 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		apmu@e6151000 {
@@ -264,6 +268,7 @@
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7794-rst";
 			reg = <0 0xe6160000 0 0x0100>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1440,6 +1445,7 @@
 		prr: chipid@ff000044 {
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
+			bootph-all;
 		};
 
 		cmt0: timer@ffca0000 {
@@ -1479,10 +1485,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
@@ -1491,5 +1497,6 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
+		bootph-all;
 	};
 };
diff --git a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
index 31cdca3e623c..4a72aa7663f2 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
+++ b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts
@@ -8,8 +8,11 @@
 
 /dts-v1/;
 
-#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/pcs-rzn1-miic.h>
+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
 
 #include "r9a06g032.dtsi"
 
@@ -24,6 +27,127 @@
 	aliases {
 		serial0 = &uart0;
 	};
+
+	keyboard {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		switch-1 {
+			linux,code = <KEY_1>;
+			label = "SW1-1";
+			debounce-interval = <20>;
+			gpios = <&pca9698 8 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-2 {
+			linux,code = <KEY_2>;
+			label = "SW1-2";
+			debounce-interval = <20>;
+			gpios = <&pca9698 9 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			linux,code = <KEY_3>;
+			label = "SW1-3";
+			debounce-interval = <20>;
+			gpios = <&pca9698 10 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-4 {
+			linux,code = <KEY_4>;
+			label = "SW1-4";
+			debounce-interval = <20>;
+			gpios = <&pca9698 11 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-5 {
+			linux,code = <KEY_5>;
+			label = "SW1-5";
+			debounce-interval = <20>;
+			gpios = <&pca9698 12 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-6 {
+			linux,code = <KEY_6>;
+			label = "SW1-6";
+			debounce-interval = <20>;
+			gpios = <&pca9698 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-7 {
+			linux,code = <KEY_7>;
+			label = "SW1-7";
+			debounce-interval = <20>;
+			gpios = <&pca9698 14 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-8 {
+			linux,code = <KEY_8>;
+			label = "SW1-8";
+			debounce-interval = <20>;
+			gpios = <&pca9698 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-dbg0 {
+			gpios = <&pca9698 0 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <0>;
+		};
+
+		led-dbg1 {
+			gpios = <&pca9698 1 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+		};
+
+		led-dbg2 {
+			gpios = <&pca9698 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+		};
+
+		led-dbg3 {
+			gpios = <&pca9698 3 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <3>;
+		};
+
+		led-dbg4 {
+			gpios = <&pca9698 4 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <4>;
+		};
+
+		led-dbg5 {
+			gpios = <&pca9698 5 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <5>;
+		};
+
+		led-dbg6 {
+			gpios = <&pca9698 6 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <6>;
+		};
+
+		led-dbg7 {
+			gpios = <&pca9698 7 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <7>;
+		};
+	};
 };
 
 &can0 {
@@ -47,6 +171,10 @@
 	renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
 };
 
+&ext_rtc_clk {
+	clock-frequency = <32768>;
+};
+
 &gmac2 {
 	status = "okay";
 	phy-mode = "gmii";
@@ -57,6 +185,44 @@
 	};
 };
 
+&i2c2 {
+	pinctrl-0 = <&pins_i2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pca9698: gpio@20 {
+		compatible = "nxp,pca9698";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		/* configure the analog switch to let i2c2 access the eeprom */
+		max4662-in1-hog {
+			gpio-hog;
+			gpios = <16 0>;
+			output-high;
+		};
+		max4662-in2-hog {
+			gpio-hog;
+			gpios = <17 0>;
+			output-low;
+		};
+		max4662-in3-hog {
+			gpio-hog;
+			gpios = <18 0>;
+			output-low;
+		};
+	};
+
+	/* Some revisions may have a 24cs64 at address 0x58 */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+};
+
 &mii_conv4 {
 	renesas,miic-input = <MIIC_SWITCH_PORTB>;
 	status = "okay";
@@ -68,6 +234,9 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_cpld>;
+
 	pins_can0: pins_can0 {
 		pinmux = <RZN1_PINMUX(162, RZN1_FUNC_CAN)>,	/* CAN0_TXD */
 			 <RZN1_PINMUX(163, RZN1_FUNC_CAN)>;	/* CAN0_RXD */
@@ -80,6 +249,13 @@
 		drive-strength = <6>;
 	};
 
+	pins_cpld: pins-cpld {
+		pinmux = <RZN1_PINMUX(119, RZN1_FUNC_USB)>,
+			 <RZN1_PINMUX(120, RZN1_FUNC_USB)>,
+			 <RZN1_PINMUX(121, RZN1_FUNC_USB)>,
+			 <RZN1_PINMUX(122, RZN1_FUNC_USB)>;
+	};
+
 	pins_eth3: pins_eth3 {
 		pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
 			 <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
@@ -114,6 +290,12 @@
 		bias-disable;
 	};
 
+	pins_i2c2: pins_i2c2 {
+		pinmux = <RZN1_PINMUX(115, RZN1_FUNC_I2C)>,
+			 <RZN1_PINMUX(116, RZN1_FUNC_I2C)>;
+		drive-strength = <12>;
+	};
+
 	pins_mdio1: pins_mdio1 {
 		pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>,
 			 <RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>;
@@ -126,8 +308,6 @@
 
 &switch {
 	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>;
@@ -174,6 +354,10 @@
 	status = "okay";
 };
 
+&udc {
+	status = "okay";
+};
+
 &wdt0 {
 	timeout-sec = <60>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
new file mode 100644
index 000000000000..97a339b30d76
--- /dev/null
+++ b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-eb.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZN1D-EB Board
+ *
+ * Copyright (C) 2023 Schneider-Electric
+ *
+ */
+
+#include <dt-bindings/leds/common.h>
+#include "r9a06g032-rzn1d400-db.dts"
+
+/ {
+	model = "RZN1D-EB Board";
+	compatible = "renesas,rzn1d400-eb", "renesas,rzn1d400-db",
+		     "renesas,r9a06g032";
+};
+
+&gmac1 {
+	pinctrl-0 = <&pins_eth0>, <&pins_mdio0>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy_mii0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy_mii0: ethernet-phy@8 {
+			reg = <8>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_ORANGE>;
+					function = LED_FUNCTION_ACTIVITY;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* Sensors are different across revisions. All are LM75B compatible */
+	sensor@49 {
+		compatible = "national,lm75b";
+		reg = <0x49>;
+	};
+};
+
+&mii_conv1 {
+	renesas,miic-input = <MIIC_GMAC1_PORT>;
+	status = "okay";
+};
+
+&mii_conv2 {
+	renesas,miic-input = <MIIC_SWITCH_PORTD>;
+	status = "okay";
+};
+
+&mii_conv3 {
+	renesas,miic-input = <MIIC_SWITCH_PORTC>;
+	status = "okay";
+};
+
+&pci_usb {
+	status = "okay";
+};
+
+&pinctrl {
+	pins_eth0: pins-eth0 {
+		pinmux = <RZN1_PINMUX(0, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(1, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(2, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(3, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(4, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(5, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(6, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(7, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(8, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(9, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(10, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(11, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth1: pins-eth1 {
+		pinmux = <RZN1_PINMUX(12, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(13, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(14, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(15, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(16, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(17, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(18, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(19, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(20, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(21, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(22, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(23, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth2: pins-eth2 {
+		pinmux = <RZN1_PINMUX(24, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(25, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(26, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(27, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(28, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(29, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(30, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(31, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(32, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(33, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(34, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(35, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_mdio0: pins-mdio0 {
+		pinmux = <RZN1_PINMUX(150, RZN1_FUNC_MDIO0_GMAC0)>,
+			 <RZN1_PINMUX(151, RZN1_FUNC_MDIO0_GMAC0)>;
+	};
+
+	pins_sdio1: pins-sdio1 {
+		pinmux = <RZN1_PINMUX(95, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(97, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(98, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(99, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(100, RZN1_FUNC_SDIO)>,
+			 <RZN1_PINMUX(101, RZN1_FUNC_SDIO_E)>,
+			 <RZN1_PINMUX(102, RZN1_FUNC_SDIO_E)>;
+	};
+
+	pins_sdio1_clk: pins-sdio1-clk {
+		pinmux = <RZN1_PINMUX(96, RZN1_FUNC_SDIO)>;
+		drive-strength = <12>;
+	};
+
+	pins_uart2: pins-uart2 {
+		pinmux = <RZN1_PINMUX(105, RZN1_FUNC_UART2)>,
+			 <RZN1_PINMUX(106, RZN1_FUNC_UART2)>,
+			 <RZN1_PINMUX(107, RZN1_FUNC_UART2)>,
+			 <RZN1_PINMUX(108, RZN1_FUNC_UART2)>;
+		bias-disable;
+	};
+};
+
+&sdio1 {
+	pinctrl-0 = <&pins_sdio1>, <&pins_sdio1_clk>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pins_eth1>, <&pins_eth2>, <&pins_eth3>, <&pins_eth4>,
+		    <&pins_mdio1>;
+
+	mdio {
+		/* CN15 and CN16 switches must be configured in MDIO2 mode */
+		switch0phy1: ethernet-phy@1 {
+			reg = <1>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_ORANGE>;
+					function = LED_FUNCTION_ACTIVITY;
+					default-state = "keep";
+				};
+			};
+		};
+
+		switch0phy10: ethernet-phy@10 {
+			reg = <10>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_ORANGE>;
+					function = LED_FUNCTION_ACTIVITY;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&switch_port2 {
+	label = "lan2";
+	phy-mode = "rgmii-id";
+	phy-handle = <&switch0phy10>;
+	status = "okay";
+};
+
+&switch_port3 {
+	label = "lan3";
+	phy-mode = "rgmii-id";
+	phy-handle = <&switch0phy1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pins_uart2>;
+	pinctrl-names = "default";
+	status = "okay";
+	uart-has-rtscts;
+};
diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 7548291c8d7e..8debb77803bb 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -13,6 +13,7 @@
 	compatible = "renesas,r9a06g032";
 	#address-cells = <1>;
 	#size-cells = <1>;
+	interrupt-parent = <&gic>;
 
 	cpus {
 		#address-cells = <1>;
@@ -63,7 +64,6 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		interrupt-parent = <&gic>;
 		ranges;
 
 		rtc0: rtc@40006000 {
@@ -73,8 +73,8 @@
 				     <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "alarm", "timer", "pps";
-			clocks = <&sysctrl R9A06G032_HCLK_RTC>;
-			clock-names = "hclk";
+			clocks = <&sysctrl R9A06G032_HCLK_RTC>, <&ext_rtc_clk>;
+			clock-names = "hclk", "xtal";
 			power-domains = <&sysctrl>;
 			status = "disabled";
 		};
@@ -211,8 +211,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 1 0 0 0 1 1>, <&dmamux 0 0 0 0 0 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -224,8 +224,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 3 0 0 0 3 1>, <&dmamux 2 0 0 0 2 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -237,8 +237,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 5 0 0 0 5 1>, <&dmamux 4 0 0 0 4 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -250,8 +250,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 7 0 0 0 7 1>, <&dmamux 6 0 0 0 6 1>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -263,8 +263,40 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
 			clock-names = "baudclk", "apb_pclk";
-			dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
-			dma-names = "rx", "tx";
+			dmas = <&dmamux 5 0 0 0 21 1>, <&dmamux 4 0 0 0 20 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@40063000 {
+			compatible = "renesas,r9a06g032-i2c", "renesas,rzn1-i2c", "snps,designware-i2c";
+			reg = <0x40063000 0x100>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_I2C0>, <&sysctrl R9A06G032_CLK_I2C0>;
+			clock-names = "ref", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40064000 {
+			compatible = "renesas,r9a06g032-i2c", "renesas,rzn1-i2c", "snps,designware-i2c";
+			reg = <0x40064000 0x100>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_I2C1>, <&sysctrl R9A06G032_CLK_I2C1>;
+			clock-names = "ref", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		adc: adc@40065000 {
+			compatible = "renesas,r9a06g032-adc", "renesas,rzn1-adc";
+			reg = <0x40065000 0x200>;
+			clocks = <&sysctrl R9A06G032_HCLK_ADC>, <&sysctrl R9A06G032_CLK_ADC>;
+			clock-names = "pclk", "adc";
+			power-domains = <&sysctrl>;
+			#io-channel-cells = <1>;
 			status = "disabled";
 		};
 
@@ -276,6 +308,30 @@
 			status = "okay";
 		};
 
+		sdio1: mmc@40100000 {
+			compatible = "renesas,r9a06g032-sdhci", "renesas,rzn1-sdhci", "arasan,sdhci-8.9a";
+			reg = <0x40100000 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int", "wakeup";
+			clocks = <&sysctrl R9A06G032_CLK_SDIO0>, <&sysctrl R9A06G032_HCLK_SDIO0>;
+			clock-names = "clk_xin", "clk_ahb";
+			no-1-8-v;
+			status = "disabled";
+		};
+
+		sdio2: mmc@40101000 {
+			compatible = "renesas,r9a06g032-sdhci", "renesas,rzn1-sdhci", "arasan,sdhci-8.9a";
+			reg = <0x40101000 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int", "wakeup";
+			clocks = <&sysctrl R9A06G032_CLK_SDIO1>, <&sysctrl R9A06G032_HCLK_SDIO1>;
+			clock-names = "clk_xin", "clk_ahb";
+			no-1-8-v;
+			status = "disabled";
+		};
+
 		nand_controller: nand-controller@40102000 {
 			compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
 			reg = <0x40102000 0x2000>;
@@ -476,7 +532,6 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
 		arm,cpu-registers-not-fw-configured;
 		always-on;
 		interrupts =
diff --git a/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts b/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts
index 1ce07d0878dc..0a9cd61bcb5f 100644
--- a/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts
@@ -209,6 +209,7 @@
 		reg = <0x1d>;
 		interrupts-extended = <&irqpin3 2 IRQ_TYPE_LEVEL_HIGH>,
 				      <&irqpin3 3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "INT1", "INT2";
 	};
 
 	rtc@32 {
diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index 4f928c7898e9..ae2f84a4e922 100644
--- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -8,6 +8,12 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -382,6 +388,18 @@
 	status = "okay";
 };
 
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
+
 &vop {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 63b9912be06a..fca21ebb224b 100644
--- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -213,6 +213,8 @@
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <275>;
 		g-tx-fifo-size = <256 128 128 64 64 32>;
+		phys = <&usb2phy_otg>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -224,6 +226,8 @@
 		clocks = <&cru HCLK_OTG1>;
 		clock-names = "otg";
 		dr_mode = "host";
+		phys = <&usb2phy_host>;
+		phy-names = "usb2-phy";
 		status = "disabled";
 	};
 
@@ -342,6 +346,37 @@
 	grf: syscon@20008000 {
 		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
 		reg = <0x20008000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usb2phy: usb2phy@17c {
+			compatible = "rockchip,rk3036-usb2phy";
+			reg = <0x017c 0x20>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			assigned-clocks = <&cru SCLK_USB480M>;
+			assigned-clock-parents = <&usb2phy>;
+			#clock-cells = <0>;
+			status = "disabled";
+
+			usb2phy_host: host-port {
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb2phy_otg: otg-port {
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
 
 		power: power-controller {
 			compatible = "rockchip,rk3036-power-controller";
@@ -398,8 +433,9 @@
 		compatible = "rockchip,rk3036-inno-hdmi";
 		reg = <0x20034000 0x4000>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru  PCLK_HDMI>;
-		clock-names = "pclk";
+		clocks = <&cru PCLK_HDMI>, <&cru SCLK_LCDC>;
+		clock-names = "pclk", "ref";
+		rockchip,grf = <&grf>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmi_ctl>;
 		#sound-dai-cells = <0>;
diff --git a/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts
index c227691013ea..65f8bc804d21 100644
--- a/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts
@@ -80,26 +80,33 @@
 	clock-frequency = <400000>;
 
 	tps: tps@2d {
+		compatible = "ti,tps65910";
 		reg = <0x2d>;
 
+		gpio-controller;
+		#gpio-cells = <2>;
+
 		interrupt-parent = <&gpio6>;
 		interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
 
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
 		vcc5-supply = <&vcc_io>;
 		vcc6-supply = <&vcc_io>;
 
 		regulators {
-			vcc_rtc: regulator@0 {
+			vcc_rtc: vrtc {
 				regulator-name = "vcc_rtc";
 				regulator-always-on;
 			};
 
-			vcc_io: regulator@1 {
+			vcc_io: vio {
 				regulator-name = "vcc_io";
 				regulator-always-on;
 			};
 
-			vdd_arm: regulator@2 {
+			vdd_arm: vdd1 {
 				regulator-name = "vdd_arm";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <1500000>;
@@ -107,7 +114,7 @@
 				regulator-always-on;
 			};
 
-			vcc_ddr: regulator@3 {
+			vcc_ddr: vdd2 {
 				regulator-name = "vcc_ddr";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <1500000>;
@@ -115,42 +122,42 @@
 				regulator-always-on;
 			};
 
-			vcc18_cif: regulator@5 {
+			vcc18_cif: vdig1 {
 				regulator-name = "vcc18_cif";
 				regulator-always-on;
 			};
 
-			vdd_11: regulator@6 {
+			vdd_11: vdig2 {
 				regulator-name = "vdd_11";
 				regulator-always-on;
 			};
 
-			vcc_25: regulator@7 {
+			vcc_25: vpll {
 				regulator-name = "vcc_25";
 				regulator-always-on;
 			};
 
-			vcc_18: regulator@8 {
+			vcc_18: vdac {
 				regulator-name = "vcc_18";
 				regulator-always-on;
 			};
 
-			vcc25_hdmi: regulator@9 {
+			vcc25_hdmi: vaux1 {
 				regulator-name = "vcc25_hdmi";
 				regulator-always-on;
 			};
 
-			vcca_33: regulator@10 {
+			vcca_33: vaux2 {
 				regulator-name = "vcca_33";
 				regulator-always-on;
 			};
 
-			vcc_tp: regulator@11 {
+			vcc_tp: vaux33 {
 				regulator-name = "vcc_tp";
 				regulator-always-on;
 			};
 
-			vcc28_cif: regulator@12 {
+			vcc28_cif: vmmc {
 				regulator-name = "vcc28_cif";
 				regulator-always-on;
 			};
@@ -158,9 +165,6 @@
 	};
 };
 
-/* must be included after &tps gets defined */
-#include "../tps65910.dtsi"
-
 &mmc0 { /* sdmmc */
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
index ada7dbfc06a5..15dbe1677e30 100644
--- a/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
@@ -19,6 +19,17 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
+	hdmi_con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	vdd_log: regulator-vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm3 0 1000>;
@@ -58,16 +69,45 @@
 	cpu-supply = <&vdd_arm>;
 };
 
+&gpu {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in_vop1 {
+	status = "disabled";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
 
 	tps: tps@2d {
+		compatible = "ti,tps65910";
 		reg = <0x2d>;
 
+		gpio-controller;
+		#gpio-cells = <2>;
+
 		interrupt-parent = <&gpio6>;
 		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
 
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
 		vcc1-supply = <&vsys>;
 		vcc2-supply = <&vsys>;
 		vcc3-supply = <&vsys>;
@@ -78,17 +118,17 @@
 		vccio-supply = <&vsys>;
 
 		regulators {
-			vcc_rtc: regulator@0 {
+			vcc_rtc: vrtc {
 				regulator-name = "vcc_rtc";
 				regulator-always-on;
 			};
 
-			vcc_io: regulator@1 {
+			vcc_io: vio {
 				regulator-name = "vcc_io";
 				regulator-always-on;
 			};
 
-			vdd_arm: regulator@2 {
+			vdd_arm: vdd1 {
 				regulator-name = "vdd_arm";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <1500000>;
@@ -96,7 +136,7 @@
 				regulator-always-on;
 			};
 
-			vcc_ddr: regulator@3 {
+			vcc_ddr: vdd2 {
 				regulator-name = "vcc_ddr";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <1500000>;
@@ -104,41 +144,41 @@
 				regulator-always-on;
 			};
 
-			vcc18_cif: regulator@5 {
+			vcc18_cif: vdig1 {
 				regulator-name = "vcc18_cif";
 				regulator-always-on;
 			};
 
-			vdd_11: regulator@6 {
+			vdd_11: vdig2 {
 				regulator-name = "vdd_11";
 				regulator-always-on;
 			};
 
-			vcc_25: regulator@7 {
+			vcc_25: vpll {
 				regulator-name = "vcc_25";
 				regulator-always-on;
 			};
 
-			vcc_18: regulator@8 {
+			vcc_18: vdac {
 				regulator-name = "vcc_18";
 				regulator-always-on;
 			};
 
-			vcc25_hdmi: regulator@9 {
+			vcc25_hdmi: vaux1 {
 				regulator-name = "vcc25_hdmi";
 				regulator-always-on;
 			};
 
-			vcca_33: regulator@10 {
+			vcca_33: vaux2 {
 				regulator-name = "vcca_33";
 				regulator-always-on;
 			};
 
-			vcc_rmii: regulator@11 {
+			vcc_rmii: vaux33 {
 				regulator-name = "vcc_rmii";
 			};
 
-			vcc28_cif: regulator@12 {
+			vcc28_cif: vmmc {
 				regulator-name = "vcc28_cif";
 				regulator-always-on;
 			};
@@ -146,9 +186,6 @@
 	};
 };
 
-/* must be included after &tps gets defined */
-#include "../tps65910.dtsi"
-
 &emac {
 	phy = <&phy0>;
 	phy-supply = <&vcc_rmii>;
@@ -216,6 +253,10 @@
 	status = "okay";
 };
 
+&vop0 {
+	status = "okay";
+};
+
 &wdt {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
index b0b029f14643..07c03ed6fac6 100644
--- a/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
@@ -198,9 +198,18 @@
 	status = "okay";
 
 	tps: tps@2d {
+		compatible = "ti,tps65910";
 		reg = <0x2d>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
 		interrupt-parent = <&gpio6>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_int>, <&pwr_hold>;
 
@@ -214,19 +223,19 @@
 		vccio-supply = <&vsys>;
 
 		regulators {
-			vcc_rtc: regulator@0 {
+			vcc_rtc: vrtc {
 				regulator-name = "vcc_rtc";
 				regulator-always-on;
 			};
 
-			vcc_io: regulator@1 {
+			vcc_io: vio {
 				regulator-name = "vcc_io";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 
-			vdd_arm: regulator@2 {
+			vdd_arm: vdd1 {
 				regulator-name = "vdd_arm";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <1500000>;
@@ -234,7 +243,7 @@
 				regulator-boot-on;
 			};
 
-			vcc_ddr: regulator@3 {
+			vcc_ddr: vdd2 {
 				regulator-name = "vcc_ddr";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <1500000>;
@@ -242,52 +251,52 @@
 				regulator-boot-on;
 			};
 
-			vcc18: regulator@5 {
+			vcc18: vdig1 {
 				regulator-name = "vcc18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
-			vdd_11: regulator@6 {
+			vdd_11: vdig2 {
 				regulator-name = "vdd_11";
 				regulator-min-microvolt = <1100000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 			};
 
-			vcc_25: regulator@7 {
+			vcc_25: vpll {
 				regulator-name = "vcc_25";
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
 				regulator-always-on;
 			};
 
-			vccio_wl: regulator@8 {
+			vccio_wl: vdac {
 				regulator-name = "vccio_wl";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			vcc25_hdmi: regulator@9 {
+			vcc25_hdmi: vaux1 {
 				regulator-name = "vcc25_hdmi";
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
 			};
 
-			vcca_33: regulator@10 {
+			vcca_33: vaux2 {
 				regulator-name = "vcca_33";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			vcc_rmii: regulator@11 {
+			vcc_rmii: vaux33 {
 				regulator-name = "vcc_rmii";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			vcc28_cif: regulator@12 {
+			vcc28_cif: vmmc {
 				regulator-name = "vcc28_cif";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -296,8 +305,6 @@
 	};
 };
 
-#include "../tps65910.dtsi"
-
 &i2c2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
index 21f824b09191..decbf2726ec4 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -272,7 +272,7 @@
 	phy-mode = "rmii";
 	phy-handle = <&phy0>;
 	assigned-clocks = <&cru SCLK_MAC_SRC>;
-	assigned-clock-rates= <50000000>;
+	assigned-clock-rates = <50000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&rmii_pins>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index d4572146d135..c49099954c28 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -48,7 +48,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu_opp_table>;
@@ -87,31 +86,38 @@
 		opp-216000000 {
 			opp-hz = /bits/ 64 <216000000>;
 			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-408000000 {
 			opp-hz = /bits/ 64 <408000000>;
 			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-696000000 {
 			opp-hz = /bits/ 64 <696000000>;
 			opp-microvolt = <975000 975000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
 			opp-microvolt = <1075000 1075000 1325000>;
 			opp-suspend;
+			clock-latency-ns = <40000>;
 		};
 		opp-1008000000 {
 			opp-hz = /bits/ 64 <1008000000>;
 			opp-microvolt = <1200000 1200000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1325000 1325000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rockchip/rk3188.dtsi b/arch/arm/boot/dts/rockchip/rk3188.dtsi
index 44b54af0bbf9..850bd6e67895 100644
--- a/arch/arm/boot/dts/rockchip/rk3188.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3188.dtsi
@@ -23,7 +23,6 @@
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			reg = <0x0>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			resets = <&cru SRST_CORE0>;
diff --git a/arch/arm/boot/dts/rockchip/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi
index 96421355c274..cd11a018105b 100644
--- a/arch/arm/boot/dts/rockchip/rk322x.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -36,7 +36,6 @@
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			enable-method = "psci";
 		};
diff --git a/arch/arm/boot/dts/rockchip/rk3288-miqi.dts b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
index dd42f8d31f70..a5f5c6d38f80 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
@@ -78,6 +78,21 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "HDMI";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+	};
 };
 
 &cpu0 {
@@ -130,6 +145,8 @@
 
 &hdmi {
 	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec_c0>;
 	status = "okay";
 };
 
@@ -283,6 +300,11 @@
 	status = "okay";
 };
 
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
 &io_domains {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi
index 260d6c92cfd1..2d6cf08d00f9 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi
@@ -388,7 +388,7 @@
 
 	rx-sample-delay-ns = <12>;
 
-	flash@0 {
+	spi_flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
index 3f1d640afafa..7477fc5da3ec 100644
--- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -34,10 +34,6 @@
 		i2c3 = &i2c3;
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
-		mshc0 = &emmc;
-		mshc1 = &sdmmc;
-		mshc2 = &sdio0;
-		mshc3 = &sdio1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -70,7 +66,6 @@
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -81,7 +76,6 @@
 			resets = <&cru SRST_CORE1>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -92,7 +86,6 @@
 			resets = <&cru SRST_CORE2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -103,7 +96,6 @@
 			resets = <&cru SRST_CORE3>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -116,6 +108,7 @@
 		opp-126000000 {
 			opp-hz = /bits/ 64 <126000000>;
 			opp-microvolt = <900000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-216000000 {
 			opp-hz = /bits/ 64 <216000000>;
@@ -748,9 +741,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			assigned-clocks = <&cru SCLK_EDP_24M>;
-			assigned-clock-parents = <&xin24m>;
-
 			/*
 			 * Note: Although SCLK_* are the working clocks
 			 * of device without including on the NOC, needed for
@@ -1200,6 +1190,8 @@
 		compatible = "rockchip,rk3288-dp";
 		reg = <0x0 0xff970000 0x0 0x4000>;
 		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_EDP_24M>;
+		assigned-clock-parents = <&xin24m>;
 		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
 		clock-names = "dp", "pclk";
 		phys = <&edp_phy>;
diff --git a/arch/arm/boot/dts/rockchip/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi
index f3291f3bbc6f..42a4d72597a5 100644
--- a/arch/arm/boot/dts/rockchip/rv1108.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -32,7 +32,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <75>;
diff --git a/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts
index c13829d32c32..8a92700349b4 100644
--- a/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts
+++ b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts
@@ -250,9 +250,9 @@
 &i2s0 {
 	/delete-property/ pinctrl-0;
 	rockchip,trcm-sync-rx-only;
-	pinctrl-0 =  <&i2s0m0_sclk_rx>,
-		     <&i2s0m0_lrck_rx>,
-		     <&i2s0m0_sdi0>;
+	pinctrl-0 = <&i2s0m0_sclk_rx>,
+		    <&i2s0m0_lrck_rx>,
+		    <&i2s0m0_sdi0>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
index 9a87dc0d5f66..1aedcd3a2167 100644
--- a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
@@ -323,15 +323,15 @@
 };
 
 &pmu_io_domains {
-	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio0-supply = <&vcc3v3_sys>;
 	pmuio1-supply = <&vcc3v3_sys>;
 	vccio1-supply = <&vcc_1v8>;
 	vccio2-supply = <&vccio_sd>;
 	vccio3-supply = <&vcc3v3_sd>;
-	vccio4-supply = <&vcc_dovdd>;
-	vccio5-supply = <&vcc_1v8>;
-	vccio6-supply = <&vcc_1v8>;
-	vccio7-supply = <&vcc_dovdd>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_1v8>;
 	status = "okay";
 };
 
@@ -342,16 +342,14 @@
 
 &sdio {
 	bus-width = <4>;
-	cap-sd-highspeed;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	max-frequency = <50000000>;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
 	rockchip,default-sample-phase = <90>;
-	sd-uhs-sdr50;
 	vmmc-supply = <&vcc3v3_sd>;
 	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/samsung/exynos3250-monk.dts b/arch/arm/boot/dts/samsung/exynos3250-monk.dts
index 2de877d4ccc5..68236c7297d7 100644
--- a/arch/arm/boot/dts/samsung/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/samsung/exynos3250-monk.dts
@@ -56,7 +56,7 @@
 		enable-active-high;
 	};
 
-	i2c_max77836: i2c-gpio-0 {
+	i2c_max77836: i2c-8 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
diff --git a/arch/arm/boot/dts/samsung/exynos3250-rinato.dts b/arch/arm/boot/dts/samsung/exynos3250-rinato.dts
index 88fb3e68ff02..36d2171c1ce8 100644
--- a/arch/arm/boot/dts/samsung/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/samsung/exynos3250-rinato.dts
@@ -58,7 +58,7 @@
 		reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
 	};
 
-	i2c_max77836: i2c-gpio-0 {
+	i2c_max77836: i2c-8 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
diff --git a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
index 0d8495792a70..8a635bee59fa 100644
--- a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts
@@ -130,7 +130,7 @@
 		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
 	};
 
-	i2c_max17042_fuel: i2c-gpio-0 {
+	i2c_max17042_fuel: i2c-9 {
 		compatible = "i2c-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -154,7 +154,7 @@
 		};
 	};
 
-	i2c_s5k5baf: i2c-gpio-1 {
+	i2c_s5k5baf: i2c-10 {
 		compatible = "i2c-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -184,7 +184,7 @@
 		};
 	};
 
-	i2c-gpio-2 {
+	i2c-11 {
 		compatible = "i2c-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -853,6 +853,7 @@
 	#size-cells = <0>;
 
 	non-removable;
+	cap-power-off-card;
 	bus-width = <4>;
 	mmc-pwrseq = <&wlan_pwrseq>;
 	vmmc-supply = <&vtf_reg>;
diff --git a/arch/arm/boot/dts/samsung/exynos4210-trats.dts b/arch/arm/boot/dts/samsung/exynos4210-trats.dts
index 95e0e01b6ff6..6bd902cb8f4a 100644
--- a/arch/arm/boot/dts/samsung/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/samsung/exynos4210-trats.dts
@@ -518,6 +518,7 @@
 	#size-cells = <0>;
 
 	non-removable;
+	cap-power-off-card;
 	bus-width = <4>;
 	mmc-pwrseq = <&wlan_pwrseq>;
 	vmmc-supply = <&tflash_reg>;
diff --git a/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts b/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts
index bdc30f8cf748..91490693432b 100644
--- a/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts
@@ -610,6 +610,7 @@
 	#size-cells = <0>;
 
 	non-removable;
+	cap-power-off-card;
 	bus-width = <4>;
 	mmc-pwrseq = <&wlan_pwrseq>;
 	vmmc-supply = <&ldo5_reg>;
diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index 9bc05961577d..12b7f252b24d 100644
--- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -123,7 +123,7 @@
 		color = <LED_COLOR_ID_WHITE>;
 	};
 
-	i2c_max77693: i2c-gpio-1 {
+	i2c_max77693: i2c-9 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -169,7 +169,7 @@
 		};
 	};
 
-	i2c_max77693_fuel: i2c-gpio-2 {
+	i2c_max77693_fuel: i2c-10 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -190,7 +190,7 @@
 		};
 	};
 
-	i2c_magnetometer: i2c-gpio-3 {
+	i2c_magnetometer: i2c-11 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -208,7 +208,7 @@
 		};
 	};
 
-	i2c_lightsensor: i2c-gpio-4 {
+	i2c_lightsensor: i2c-12 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -220,7 +220,7 @@
 		/* WiFi model uses CM3323, 3G/LTE use CM36653 */
 	};
 
-	i2c_bl: i2c-gpio-5 {
+	i2c_bl: i2c-13 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpm4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpm4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -300,12 +300,31 @@
 		regulator-max-microvolt = <2800000>;
 	};
 
+	earmic_bias_reg: voltage-regulator-6 {
+		compatible = "regulator-fixed";
+		regulator-name = "EAR_MICBIAS_LDO_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	sound: sound {
 		compatible = "samsung,midas-audio";
 		model = "TAB3";
 		mic-bias-supply = <&mic_bias_reg>;
 		submic-bias-supply = <&submic_bias_reg>;
 
+		lineout-sel-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+		headset-mic-bias-supply = <&earmic_bias_reg>;
+		headset-detect-gpios = <&gpx0 4 GPIO_ACTIVE_LOW>;
+		headset-key-gpios = <&gpx3 6 GPIO_ACTIVE_LOW>;
+		samsung,headset-4pole-threshold-microvolt = <710 2000>;
+		samsung,headset-button-threshold-microvolt = <0 130 260>;
+		io-channel-names = "headset-detect";
+		io-channels = <&adc 0>;
+
 		audio-routing = "HP", "HPOUT1L",
 				"HP", "HPOUT1R",
 
@@ -351,6 +370,11 @@
 	};
 };
 
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
 &bus_acp {
 	devfreq = <&bus_dmc>;
 	status = "okay";
@@ -511,12 +535,11 @@
 	wm1811: audio-codec@1a {
 		compatible = "wlf,wm1811";
 		reg = <0x1a>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clocks = <&pmu_system_controller 0>,
+			 <&s5m8767_osc S2MPS11_CLK_BT>;
+		clock-names = "MCLK1", "MCLK2";
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
 
 		gpio-controller;
 		#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/samsung/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/samsung/exynos4412-galaxy-s3.dtsi
index 54e1a57ae886..3248be990059 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-galaxy-s3.dtsi
@@ -53,7 +53,7 @@
 		enable-active-high;
 	};
 
-	i2c_ak8975: i2c-gpio-0 {
+	i2c_ak8975: i2c-13 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -68,7 +68,7 @@
 		};
 	};
 
-	i2c_cm36651: i2c-gpio-2 {
+	i2c_cm36651: i2c-14 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
diff --git a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
index 3d5aace668dc..48245b1665a6 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
@@ -166,7 +166,7 @@
 		};
 	};
 
-	i2c_max77693: i2c-gpio-1 {
+	i2c_max77693: i2c-9 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -246,7 +246,7 @@
 		};
 	};
 
-	i2c_max77693_fuel: i2c-gpio-3 {
+	i2c_max77693_fuel: i2c-10 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -267,7 +267,7 @@
 		};
 	};
 
-	i2c-gpio-4 {
+	i2c-11 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -286,7 +286,7 @@
 		};
 	};
 
-	i2c-mhl {
+	i2c-12 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -1440,6 +1440,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	non-removable;
+	cap-power-off-card;
 	bus-width = <4>;
 
 	mmc-pwrseq = <&wlan_pwrseq>;
diff --git a/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi b/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi
index 28a605802733..8d52aa13b862 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi
@@ -140,7 +140,7 @@
 		constant-charge-voltage-max-microvolt = <4200000>;
 	};
 
-	i2c-gpio-1 {
+	i2c-9 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -158,7 +158,7 @@
 		};
 	};
 
-	i2c-gpio-2 {
+	i2c-10 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -179,7 +179,7 @@
 		};
 	};
 
-	i2c-gpio-3 {
+	i2c-11 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -207,7 +207,7 @@
 		};
 	};
 
-	i2c-gpio-4 {
+	i2c-12 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
diff --git a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
index bb623726ef1e..6af1f64c984b 100644
--- a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
@@ -422,6 +422,43 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
+
+	srom_ctl: srom-ctl-pins {
+		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	srom_ebi: srom-ebi-pins {
+		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&sromc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+	ethernet@1,0 {
+		compatible = "smsc,lan9115";
+		reg = <1 0 0x100>;
+		phy-mode = "mii";
+		smsc,irq-push-pull;
+		interrupt-parent = <&gpx0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reg-io-width = <2>;
+
+		samsung,srom-page-mode;
+		samsung,srom-timing = <9 12 1 6 1 1>;
+	};
 };
 
 &usbdrd {
diff --git a/arch/arm/boot/dts/samsung/exynos5250.dtsi b/arch/arm/boot/dts/samsung/exynos5250.dtsi
index b9e7c4938818..4616794b19e8 100644
--- a/arch/arm/boot/dts/samsung/exynos5250.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5250.dtsi
@@ -1214,6 +1214,15 @@
 	dma-names = "rx", "tx";
 };
 
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000>,
+		 <1 0 0x05000000 0x20000>,
+		 <2 0 0x06000000 0x20000>,
+		 <3 0 0x07000000 0x20000>;
+};
+
 &sss {
 	clocks = <&clock CLK_SSS>;
 	clock-names = "secss";
diff --git a/arch/arm/boot/dts/samsung/exynos5410.dtsi b/arch/arm/boot/dts/samsung/exynos5410.dtsi
index 546035e78f40..350bc8d6aa5c 100644
--- a/arch/arm/boot/dts/samsung/exynos5410.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5410.dtsi
@@ -372,10 +372,10 @@
 &sromc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	ranges = <0 0 0x04000000 0x20000
-		  1 0 0x05000000 0x20000
-		  2 0 0x06000000 0x20000
-		  3 0 0x07000000 0x20000>;
+	ranges = <0 0 0x04000000 0x20000>,
+		 <1 0 0x05000000 0x20000>,
+		 <2 0 0x06000000 0x20000>,
+		 <3 0 0x07000000 0x20000>;
 };
 
 &trng {
diff --git a/arch/arm/boot/dts/samsung/s5pv210-aquila.dts b/arch/arm/boot/dts/samsung/s5pv210-aquila.dts
index 0f5c6cd0f3a1..e9ec2cc718e0 100644
--- a/arch/arm/boot/dts/samsung/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/samsung/s5pv210-aquila.dts
@@ -62,7 +62,7 @@
 		regulator-max-microvolt = <3700000>;
 	};
 
-	i2c_pmic: i2c-pmic {
+	i2c_pmic: i2c-3 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
 		scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi b/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
index f628d3660493..0a1a35f4f7cc 100644
--- a/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi
@@ -102,7 +102,7 @@
 		power-off-delay-us = <500>;
 	};
 
-	i2c_sound: i2c-gpio-0 {
+	i2c_sound: i2c-3 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -150,7 +150,7 @@
 		};
 	};
 
-	i2c_accel: i2c-gpio-1 {
+	i2c_accel: i2c-4 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -170,7 +170,7 @@
 		};
 	};
 
-	i2c_pmic: i2c-gpio-2 {
+	i2c_pmic: i2c-5 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -420,7 +420,7 @@
 		};
 	};
 
-	i2c_musb: i2c-gpio-3 {
+	i2c_musb: i2c-6 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -442,7 +442,7 @@
 		};
 	};
 
-	i2c_fuel: i2c-gpio-4 {
+	i2c_fuel: i2c-7 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -459,7 +459,7 @@
 		};
 	};
 
-	i2c_touchkey: i2c-gpio-5 {
+	i2c_touchkey: i2c-8 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -485,7 +485,7 @@
 		};
 	};
 
-	i2c_prox: i2c-gpio-6 {
+	i2c_prox: i2c-9 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -513,7 +513,7 @@
 		};
 	};
 
-	i2c_magnetometer: i2c-gpio-7 {
+	i2c_magnetometer: i2c-10 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -855,7 +855,7 @@
 	assigned-clock-rates = <0>, <50000000>;
 	assigned-clock-parents = <&clocks MOUT_MPLL>;
 
-	wlan@1 {
+	wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gph2>;
diff --git a/arch/arm/boot/dts/samsung/s5pv210-galaxys.dts b/arch/arm/boot/dts/samsung/s5pv210-galaxys.dts
index 879294412381..5863a1300cc1 100644
--- a/arch/arm/boot/dts/samsung/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/samsung/s5pv210-galaxys.dts
@@ -51,7 +51,7 @@
 		};
 	};
 
-	i2c_fmradio: i2c-gpio-8 {
+	i2c_fmradio: i2c-11 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
diff --git a/arch/arm/boot/dts/samsung/s5pv210-goni.dts b/arch/arm/boot/dts/samsung/s5pv210-goni.dts
index d32f42dd1bf5..079581f4dfec 100644
--- a/arch/arm/boot/dts/samsung/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/samsung/s5pv210-goni.dts
@@ -74,7 +74,7 @@
 		enable-active-high;
 	};
 
-	i2c_pmic: i2c-pmic {
+	i2c_pmic: i2c-3 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
 		scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
index 7e08a459f7d8..ab910e1b5e6a 100644
--- a/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
@@ -43,7 +43,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			spdif_tx: endpoint {
 				remote-endpoint = <&spdif_hiecout1>;
 			};
@@ -54,7 +54,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			comp_spdif_tx: endpoint {
 				remote-endpoint = <&comp_spdif_hiecout1>;
 			};
diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
index eab3a9bd435f..e906bf6ba004 100644
--- a/arch/arm/boot/dts/st/Makefile
+++ b/arch/arm/boot/dts/st/Makefile
@@ -13,8 +13,6 @@ dtb-$(CONFIG_ARCH_SPEAR3XX) += \
 dtb-$(CONFIG_ARCH_SPEAR6XX) += \
 	spear600-evb.dtb
 dtb-$(CONFIG_ARCH_STI) += \
-	stih407-b2120.dtb \
-	stih410-b2120.dtb \
 	stih410-b2260.dtb \
 	stih418-b2199.dtb \
 	stih418-b2264.dtb
@@ -28,7 +26,9 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32746g-eval.dtb \
 	stm32h743i-eval.dtb \
 	stm32h743i-disco.dtb \
+	stm32h747i-disco.dtb \
 	stm32h750i-art-pi.dtb \
+	stm32mp133c-prihmb.dtb \
 	stm32mp135f-dhcor-dhsbc.dtb \
 	stm32mp135f-dk.dtb \
 	stm32mp151a-prtt1a.dtb \
@@ -37,8 +37,12 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp151a-dhcor-testbench.dtb \
 	stm32mp151c-mecio1r0.dtb \
 	stm32mp151c-mect1s.dtb \
+	stm32mp151c-plyaqm.dtb \
 	stm32mp153c-dhcom-drc02.dtb \
 	stm32mp153c-dhcor-drc-compact.dtb \
+	stm32mp153c-lxa-fairytux2-gen1.dtb \
+	stm32mp153c-lxa-fairytux2-gen2.dtb \
+	stm32mp153c-lxa-tac-gen3.dtb \
 	stm32mp153c-mecio1r1.dtb \
 	stm32mp157a-avenger96.dtb \
 	stm32mp157a-dhcor-avenger96.dtb \
@@ -65,7 +69,9 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157c-lxa-tac-gen2.dtb \
 	stm32mp157c-odyssey.dtb \
 	stm32mp157c-osd32mp1-red.dtb \
-	stm32mp157c-phycore-stm32mp1-3.dtb
+	stm32mp157c-phycore-stm32mp1-3.dtb \
+	stm32mp157c-ultra-fly-sbc.dtb \
+	stm32mp157f-dk2.dtb
 dtb-$(CONFIG_ARCH_U8500) += \
 	ste-snowball.dtb \
 	ste-hrefprev60-stuib.dtb \
diff --git a/arch/arm/boot/dts/st/spear1310-evb.dts b/arch/arm/boot/dts/st/spear1310-evb.dts
index ad216571ba57..417a064db11e 100644
--- a/arch/arm/boot/dts/st/spear1310-evb.dts
+++ b/arch/arm/boot/dts/st/spear1310-evb.dts
@@ -159,7 +159,7 @@
 			};
 		};
 
-		gmac0: eth@e2000000 {
+		gmac0: ethernet@e2000000 {
 			phy-mode = "gmii";
 			status = "okay";
 		};
@@ -205,19 +205,19 @@
 			};
 		};
 
-		ehci@e4800000 {
+		usb@e4800000 {
 			status = "okay";
 		};
 
-		ehci@e5800000 {
+		usb@e5800000 {
 			status = "okay";
 		};
 
-		ohci@e4000000 {
+		usb@e4000000 {
 			status = "okay";
 		};
 
-		ohci@e5000000 {
+		usb@e5000000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/spear1310.dtsi b/arch/arm/boot/dts/st/spear1310.dtsi
index ba827d60bf07..1498996be14e 100644
--- a/arch/arm/boot/dts/st/spear1310.dtsi
+++ b/arch/arm/boot/dts/st/spear1310.dtsi
@@ -128,7 +128,7 @@
 			status = "disabled";
 		};
 
-		gmac1: eth@5c400000 {
+		gmac1: ethernet@5c400000 {
 			compatible = "st,spear600-gmac";
 			reg = <0x5c400000 0x8000>;
 			interrupts = <0 95 0x4>;
@@ -137,7 +137,7 @@
 			status = "disabled";
 		};
 
-		gmac2: eth@5c500000 {
+		gmac2: ethernet@5c500000 {
 			compatible = "st,spear600-gmac";
 			reg = <0x5c500000 0x8000>;
 			interrupts = <0 96 0x4>;
@@ -146,7 +146,7 @@
 			status = "disabled";
 		};
 
-		gmac3: eth@5c600000 {
+		gmac3: ethernet@5c600000 {
 			compatible = "st,spear600-gmac";
 			reg = <0x5c600000 0x8000>;
 			interrupts = <0 97 0x4>;
@@ -155,7 +155,7 @@
 			status = "disabled";
 		};
 
-		gmac4: eth@5c700000 {
+		gmac4: ethernet@5c700000 {
 			compatible = "st,spear600-gmac";
 			reg = <0x5c700000 0x8000>;
 			interrupts = <0 98 0x4>;
diff --git a/arch/arm/boot/dts/st/spear1340-evb.dts b/arch/arm/boot/dts/st/spear1340-evb.dts
index 9b515b21a633..9e7c356b1d9e 100644
--- a/arch/arm/boot/dts/st/spear1340-evb.dts
+++ b/arch/arm/boot/dts/st/spear1340-evb.dts
@@ -157,7 +157,7 @@
 			};
 		};
 
-		gmac0: eth@e2000000 {
+		gmac0: ethernet@e2000000 {
 			phy-mode = "rgmii";
 			status = "okay";
 		};
@@ -203,7 +203,7 @@
 			};
 		};
 
-		ehci@e4800000 {
+		usb@e4800000 {
 			status = "okay";
 		};
 
@@ -221,7 +221,7 @@
 			};
 		};
 
-		ehci@e5800000 {
+		usb@e5800000 {
 			status = "okay";
 		};
 
@@ -238,11 +238,11 @@
 			status = "okay";
 		};
 
-		ohci@e4000000 {
+		usb@e4000000 {
 			status = "okay";
 		};
 
-		ohci@e5000000 {
+		usb@e5000000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/spear13xx.dtsi b/arch/arm/boot/dts/st/spear13xx.dtsi
index 3b6897084e26..159e941708ca 100644
--- a/arch/arm/boot/dts/st/spear13xx.dtsi
+++ b/arch/arm/boot/dts/st/spear13xx.dtsi
@@ -149,7 +149,7 @@
 			status = "disabled";
 		};
 
-		gmac0: eth@e2000000 {
+		gmac0: ethernet@e2000000 {
 			compatible = "st,spear600-gmac";
 			reg = <0xe2000000 0x8000>;
 			interrupts = <0 33 0x4>,
@@ -174,7 +174,7 @@
 			status = "disabled";
 		};
 
-		ehci@e4800000 {
+		usb@e4800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe4800000 0x1000>;
 			interrupts = <0 64 0x4>;
@@ -182,7 +182,7 @@
 			status = "disabled";
 		};
 
-		ehci@e5800000 {
+		usb@e5800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe5800000 0x1000>;
 			interrupts = <0 66 0x4>;
@@ -190,7 +190,7 @@
 			status = "disabled";
 		};
 
-		ohci@e4000000 {
+		usb@e4000000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe4000000 0x1000>;
 			interrupts = <0 65 0x4>;
@@ -198,7 +198,7 @@
 			status = "disabled";
 		};
 
-		ohci@e5000000 {
+		usb@e5000000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe5000000 0x1000>;
 			interrupts = <0 67 0x4>;
diff --git a/arch/arm/boot/dts/st/spear300-evb.dts b/arch/arm/boot/dts/st/spear300-evb.dts
index 303ef29fb805..80fae76d4610 100644
--- a/arch/arm/boot/dts/st/spear300-evb.dts
+++ b/arch/arm/boot/dts/st/spear300-evb.dts
@@ -69,7 +69,7 @@
 			status = "okay";
 		};
 
-		gmac: eth@e0800000 {
+		gmac: ethernet@e0800000 {
 			status = "okay";
 		};
 
@@ -119,15 +119,15 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/spear310-evb.dts b/arch/arm/boot/dts/st/spear310-evb.dts
index ea0b53036f7b..a3449eb7e59b 100644
--- a/arch/arm/boot/dts/st/spear310-evb.dts
+++ b/arch/arm/boot/dts/st/spear310-evb.dts
@@ -88,7 +88,7 @@
 			status = "okay";
 		};
 
-		gmac: eth@e0800000 {
+		gmac: ethernet@e0800000 {
 			status = "okay";
 		};
 
@@ -133,15 +133,15 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/spear320-evb.dts b/arch/arm/boot/dts/st/spear320-evb.dts
index 3c026d021c92..984075e60634 100644
--- a/arch/arm/boot/dts/st/spear320-evb.dts
+++ b/arch/arm/boot/dts/st/spear320-evb.dts
@@ -84,7 +84,7 @@
 			status = "okay";
 		};
 
-		gmac: eth@e0800000 {
+		gmac: ethernet@e0800000 {
 			status = "okay";
 		};
 
@@ -142,15 +142,15 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/spear320-hmi.dts b/arch/arm/boot/dts/st/spear320-hmi.dts
index 721e5ee7b680..8010918e5257 100644
--- a/arch/arm/boot/dts/st/spear320-hmi.dts
+++ b/arch/arm/boot/dts/st/spear320-hmi.dts
@@ -92,7 +92,7 @@
 			status = "okay";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			status = "okay";
 		};
 
@@ -147,11 +147,11 @@
 			};
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			status = "okay";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/st/spear3xx.dtsi b/arch/arm/boot/dts/st/spear3xx.dtsi
index cc88ebe7a60c..54e87ac98164 100644
--- a/arch/arm/boot/dts/st/spear3xx.dtsi
+++ b/arch/arm/boot/dts/st/spear3xx.dtsi
@@ -46,7 +46,7 @@
 			status = "disabled";
 		};
 
-		gmac: eth@e0800000 {
+		gmac: ethernet@e0800000 {
 			compatible = "snps,dwmac-3.40a";
 			reg = <0xe0800000 0x8000>;
 			interrupts = <23 22>;
@@ -73,21 +73,21 @@
 			status = "disabled";
 		};
 
-		ehci@e1800000 {
+		usb@e1800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe1800000 0x1000>;
 			interrupts = <26>;
 			status = "disabled";
 		};
 
-		ohci@e1900000 {
+		usb@e1900000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe1900000 0x1000>;
 			interrupts = <25>;
 			status = "disabled";
 		};
 
-		ohci@e2100000 {
+		usb@e2100000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe2100000 0x1000>;
 			interrupts = <27>;
diff --git a/arch/arm/boot/dts/st/spear600.dtsi b/arch/arm/boot/dts/st/spear600.dtsi
index 6b67c0ceaed9..9a93367445ca 100644
--- a/arch/arm/boot/dts/st/spear600.dtsi
+++ b/arch/arm/boot/dts/st/spear600.dtsi
@@ -91,7 +91,7 @@
 			status = "disabled";
 		};
 
-		ehci_usb0: ehci@e1800000 {
+		ehci_usb0: usb@e1800000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe1800000 0x1000>;
 			interrupt-parent = <&vic1>;
@@ -99,7 +99,7 @@
 			status = "disabled";
 		};
 
-		ehci_usb1: ehci@e2000000 {
+		ehci_usb1: usb@e2000000 {
 			compatible = "st,spear600-ehci", "usb-ehci";
 			reg = <0xe2000000 0x1000>;
 			interrupt-parent = <&vic1>;
@@ -107,7 +107,7 @@
 			status = "disabled";
 		};
 
-		ohci_usb0: ohci@e1900000 {
+		ohci_usb0: usb@e1900000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe1900000 0x1000>;
 			interrupt-parent = <&vic1>;
@@ -115,7 +115,7 @@
 			status = "disabled";
 		};
 
-		ohci_usb1: ohci@e2100000 {
+		ohci_usb1: usb@e2100000 {
 			compatible = "st,spear600-ohci", "usb-ohci";
 			reg = <0xe2100000 0x1000>;
 			interrupt-parent = <&vic1>;
diff --git a/arch/arm/boot/dts/st/ste-nomadik-s8815.dts b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
index c905c2643a12..7c7a53604204 100644
--- a/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
@@ -23,7 +23,7 @@
 
 	gpio3: gpio@101e7000 {
 		/* This hog will bias the MMC/SD card detect line */
-		mmcsd-gpio {
+		mmcsd-hog {
 			gpio-hog;
 			gpios = <16 0x0>;
 			output-low;
@@ -117,8 +117,8 @@
 	/* GPIO I2C connected to the USB portions of the STw4811 only */
 	gpio-i2c {
 		compatible = "i2c-gpio";
-		gpios = <&gpio2 10 0>, /* sda */
-			<&gpio2 9 0>; /* scl */
+		sda-gpios = <&gpio2 10 0>;
+		scl-gpios = <&gpio2 9 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
index 404d4ea9347b..8f1780d560ff 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
@@ -383,8 +383,9 @@
 				/* BT_WAKE on GPIO199 */
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 				/* BT_HOST_WAKE on GPIO97 */
-				/* FIXME: convert to interrupt */
-				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&gpio3>;
+				interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "host-wakeup";
 				/* BT_RST_N on GPIO209 */
 				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
index 40b0d92dfb15..9f58a3c2d06d 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
@@ -479,8 +479,9 @@
 				/* BT_WAKE on GPIO199 */
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 				/* BT_HOST_WAKE on GPIO97 */
-				/* FIXME: convert to interrupt */
-				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&gpio3>;
+				interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "host-wakeup";
 				/* BT_RST_N on GPIO209 */
 				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
index 229f7c32103c..64562a3a262c 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
@@ -481,8 +481,9 @@
 				/* BT_WAKE on GPIO199 */
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 				/* BT_HOST_WAKE on GPIO97 */
-				/* FIXME: convert to interrupt */
-				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&gpio3>;
+				interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "host-wakeup";
 				/* BT_RST_N on GPIO209 */
 				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/stih407-b2120.dts b/arch/arm/boot/dts/st/stih407-b2120.dts
deleted file mode 100644
index 9c79982ee7ba..000000000000
--- a/arch/arm/boot/dts/st/stih407-b2120.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- */
-/dts-v1/;
-#include "stih407.dtsi"
-#include "stihxxx-b2120.dtsi"
-/ {
-	model = "STiH407 B2120";
-	compatible = "st,stih407-b2120", "st,stih407";
-
-	chosen {
-		stdout-path = &sbc_serial0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		serial0 = &sbc_serial0;
-		ethernet0 = &ethernet0;
-	};
-
-};
diff --git a/arch/arm/boot/dts/st/stih407-clock.dtsi b/arch/arm/boot/dts/st/stih407-clock.dtsi
deleted file mode 100644
index 350bcfcf498b..000000000000
--- a/arch/arm/boot/dts/st/stih407-clock.dtsi
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics R&D Limited
- */
-#include <dt-bindings/clock/stih407-clks.h>
-/ {
-	/*
-	 * Fixed 30MHz oscillator inputs to SoC
-	 */
-	clk_sysin: clk-sysin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <30000000>;
-	};
-
-	clk_tmdsout_hdmi: clk-tmdsout-hdmi {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * A9 PLL.
-		 */
-		clockgen-a9@92b0000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0x10000>;
-
-			clockgen_a9_pll: clockgen-a9-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih407-clkgen-plla9";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_m_a9: clk-m-a9 {
-				#clock-cells = <0>;
-				compatible = "st,stih407-clkgen-a9-mux";
-
-				clocks = <&clockgen_a9_pll 0>,
-					 <&clockgen_a9_pll 0>,
-					 <&clk_s_c0_flexgen 13>,
-					 <&clk_m_a9_ext2f_div2>;
-
-				/*
-				 * ARM Peripheral clock for timers
-				 */
-				arm_periph_clk: clk-m-a9-periphs {
-					#clock-cells = <0>;
-					compatible = "fixed-factor-clock";
-
-					clocks = <&clk_m_a9>;
-					clock-div = <2>;
-					clock-mult = <1>;
-				};
-			};
-		};
-
-		clockgen-a@90ff000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x90ff000 0x1000>;
-
-			clk_s_a0_pll: clk-s-a0-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0-a0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen", "st,flexgen-stih407-a0";
-
-				#clock-cells = <1>;
-
-				clocks = <&clk_s_a0_pll 0>,
-					 <&clk_sysin>;
-			};
-		};
-
-		clk_s_c0: clockgen-c@9103000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9103000 0x1000>;
-
-			clk_s_c0_pll0: clk-s-c0-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0-c0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_pll1: clk-s-c0-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1-c0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_quadfs: clk-s-c0-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-pll";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_flexgen: clk-s-c0-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-c0";
-
-				clocks = <&clk_s_c0_pll0 0>,
-					 <&clk_s_c0_pll1 0>,
-					 <&clk_s_c0_quadfs 0>,
-					 <&clk_s_c0_quadfs 1>,
-					 <&clk_s_c0_quadfs 2>,
-					 <&clk_s_c0_quadfs 3>,
-					 <&clk_sysin>;
-
-				/*
-				 * ARM Peripheral clock for timers
-				 */
-				clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
-					#clock-cells = <0>;
-					compatible = "fixed-factor-clock";
-
-					clocks = <&clk_s_c0_flexgen 13>;
-
-					clock-output-names = "clk-m-a9-ext2f-div2";
-
-					clock-div = <2>;
-					clock-mult = <1>;
-				};
-			};
-		};
-
-		clockgen-d0@9104000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9104000 0x1000>;
-
-			clk_s_d0_quadfs: clk-s-d0-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d0_flexgen: clk-s-d0-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d0";
-
-				clocks = <&clk_s_d0_quadfs 0>,
-					 <&clk_s_d0_quadfs 1>,
-					 <&clk_s_d0_quadfs 2>,
-					 <&clk_s_d0_quadfs 3>,
-					 <&clk_sysin>;
-			};
-		};
-
-		clockgen-d2@9106000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9106000 0x1000>;
-
-			clk_s_d2_quadfs: clk-s-d2-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d2";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d2_flexgen: clk-s-d2-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d2";
-
-				clocks = <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>,
-					 <&clk_s_d2_quadfs 2>,
-					 <&clk_s_d2_quadfs 3>,
-					 <&clk_sysin>,
-					 <&clk_sysin>,
-					 <&clk_tmdsout_hdmi>;
-			};
-		};
-
-		clockgen-d3@9107000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9107000 0x1000>;
-
-			clk_s_d3_quadfs: clk-s-d3-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d3";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d3_flexgen: clk-s-d3-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d3";
-
-				clocks = <&clk_s_d3_quadfs 0>,
-					 <&clk_s_d3_quadfs 1>,
-					 <&clk_s_d3_quadfs 2>,
-					 <&clk_s_d3_quadfs 3>,
-					 <&clk_sysin>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/st/stih407-family.dtsi b/arch/arm/boot/dts/st/stih407-family.dtsi
index 35a55aef7f4b..3e6a0542e3ae 100644
--- a/arch/arm/boot/dts/st/stih407-family.dtsi
+++ b/arch/arm/boot/dts/st/stih407-family.dtsi
@@ -669,7 +669,7 @@
 			interrupt-names = "hostc";
 
 			phys = <&phy_port0 PHY_TYPE_SATA>;
-			phy-names = "ahci_phy";
+			phy-names = "sata-phy";
 
 			resets = <&powerdown STIH407_SATA0_POWERDOWN>,
 				 <&softreset STIH407_SATA0_SOFTRESET>,
@@ -692,7 +692,7 @@
 			interrupt-names = "hostc";
 
 			phys = <&phy_port1 PHY_TYPE_SATA>;
-			phy-names = "ahci_phy";
+			phy-names = "sata-phy";
 
 			resets = <&powerdown STIH407_SATA1_POWERDOWN>,
 				 <&softreset STIH407_SATA1_SOFTRESET>,
diff --git a/arch/arm/boot/dts/st/stih407.dtsi b/arch/arm/boot/dts/st/stih407.dtsi
deleted file mode 100644
index aca43d2bdaad..000000000000
--- a/arch/arm/boot/dts/st/stih407.dtsi
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 STMicroelectronics Limited.
- * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org>
- */
-#include "stih407-clock.dtsi"
-#include "stih407-family.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	soc {
-		sti-display-subsystem@0 {
-			compatible = "st,sti-display-subsystem";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0>;
-			assigned-clocks = <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 1>,
-					  <&clk_s_c0_pll1 0>,
-					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
-
-			assigned-clock-parents = <0>,
-						 <0>,
-						 <0>,
-						 <&clk_s_c0_pll1 0>,
-						 <&clk_s_c0_pll1 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 1>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>;
-
-			assigned-clock-rates = <297000000>,
-					       <108000000>,
-					       <0>,
-					       <400000000>,
-					       <400000000>;
-
-			ranges;
-
-			sti-compositor@9d11000 {
-				compatible = "st,stih407-compositor";
-				reg = <0x9d11000 0x1000>;
-
-				clock-names = "compo_main",
-					      "compo_aux",
-					      "pix_main",
-					      "pix_aux",
-					      "pix_gdp1",
-					      "pix_gdp2",
-					      "pix_gdp3",
-					      "pix_gdp4",
-					      "main_parent",
-					      "aux_parent";
-
-				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-
-				reset-names = "compo-main", "compo-aux";
-				resets = <&softreset STIH407_COMPO_SOFTRESET>,
-					 <&softreset STIH407_COMPO_SOFTRESET>;
-				st,vtg = <&vtg_main>, <&vtg_aux>;
-			};
-
-			sti-tvout@8d08000 {
-				compatible = "st,stih407-tvout";
-				reg = <0x8d08000 0x1000>;
-				reg-names = "tvout-reg";
-				reset-names = "tvout";
-				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-						  <&clk_s_d0_flexgen CLK_PCM_0>,
-						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-						  <&clk_s_d2_flexgen CLK_HDDAC>;
-
-				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
-							 <&clk_tmdsout_hdmi>,
-							 <&clk_s_d2_quadfs 0>,
-							 <&clk_s_d0_quadfs 0>,
-							 <&clk_s_d2_quadfs 0>,
-							 <&clk_s_d2_quadfs 0>;
-			};
-
-			sti_hdmi: sti-hdmi@8d04000 {
-				compatible = "st,stih407-hdmi";
-				reg = <0x8d04000 0x1000>;
-				reg-names = "hdmi-reg";
-				#sound-dai-cells = <0>;
-				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "irq";
-				clock-names = "pix",
-					      "tmds",
-					      "phy",
-					      "audio",
-					      "main_parent",
-					      "aux_parent";
-
-				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-					 <&clk_s_d0_flexgen CLK_PCM_0>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-
-				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
-				reset-names = "hdmi";
-				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
-				ddc = <&hdmiddc>;
-			};
-
-			sti-hda@8d02000 {
-				compatible = "st,stih407-hda";
-				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
-				reg-names = "hda-reg", "video-dacs-ctrl";
-				clock-names = "pix",
-					      "hddac",
-					      "main_parent",
-					      "aux_parent";
-				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-					 <&clk_s_d2_flexgen CLK_HDDAC>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/st/stih410-b2120.dts b/arch/arm/boot/dts/st/stih410-b2120.dts
deleted file mode 100644
index 538ff98ca1b1..000000000000
--- a/arch/arm/boot/dts/st/stih410-b2120.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Peter Griffin <peter.griffin@linaro.org>
- */
-/dts-v1/;
-#include "stih410.dtsi"
-#include "stihxxx-b2120.dtsi"
-/ {
-	model = "STiH410 B2120";
-	compatible = "st,stih410-b2120", "st,stih410";
-
-	chosen {
-		stdout-path = &sbc_serial0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		serial0 = &sbc_serial0;
-		ethernet0 = &ethernet0;
-	};
-
-	usb2_picophy1: phy2 {
-		status = "okay";
-	};
-
-	usb2_picophy2: phy3 {
-		status = "okay";
-	};
-
-	soc {
-
-		mmc0: sdhci@9060000 {
-			max-frequency = <200000000>;
-			sd-uhs-sdr50;
-			sd-uhs-sdr104;
-			sd-uhs-ddr50;
-		};
-
-		ohci0: usb@9a03c00 {
-			status = "okay";
-		};
-
-		ehci0: usb@9a03e00 {
-			status = "okay";
-		};
-
-		ohci1: usb@9a83c00 {
-			status = "okay";
-		};
-
-		ehci1: usb@9a83e00 {
-			status = "okay";
-		};
-
-		sti-display-subsystem@0 {
-			sti-hda@8d02000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/st/stih410-b2260.dts b/arch/arm/boot/dts/st/stih410-b2260.dts
index 240b62040000..736b1e059b0a 100644
--- a/arch/arm/boot/dts/st/stih410-b2260.dts
+++ b/arch/arm/boot/dts/st/stih410-b2260.dts
@@ -206,5 +206,9 @@
 		sata1: sata@9b28000 {
 			status = "okay";
 		};
+
+		gpu: gpu@9f00000 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/st/stih410.dtsi b/arch/arm/boot/dts/st/stih410.dtsi
index a69231854f78..07da9b48ccac 100644
--- a/arch/arm/boot/dts/st/stih410.dtsi
+++ b/arch/arm/boot/dts/st/stih410.dtsi
@@ -34,6 +34,41 @@
 		status = "disabled";
 	};
 
+	display-subsystem {
+		compatible = "st,sti-display-subsystem";
+		ports = <&compositor>, <&hqvdp>, <&tvout>, <&sti_hdmi>;
+
+		assigned-clocks = <&clk_s_d2_quadfs 0>,
+				  <&clk_s_d2_quadfs 1>,
+				  <&clk_s_c0_pll1 0>,
+				  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+				  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+				  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+				  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+				  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+				  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+				  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+				  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+		assigned-clock-parents = <0>,
+					 <0>,
+					 <0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 0>;
+
+		assigned-clock-rates = <297000000>,
+				       <297000000>,
+				       <0>,
+				       <400000000>,
+				       <400000000>;
+	};
+
 	soc {
 		ohci0: usb@9a03c00 {
 			compatible = "st,st-ohci-300x";
@@ -99,151 +134,174 @@
 			status = "disabled";
 		};
 
-		sti-display-subsystem@0 {
-			compatible = "st,sti-display-subsystem";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			reg = <0 0>;
-			assigned-clocks = <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 1>,
-					  <&clk_s_c0_pll1 0>,
-					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
-
-			assigned-clock-parents = <0>,
-						 <0>,
-						 <0>,
-						 <&clk_s_c0_pll1 0>,
-						 <&clk_s_c0_pll1 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 1>,
-						 <&clk_s_d2_quadfs 0>,
+		compositor: display-controller@9d11000 {
+			compatible = "st,stih407-compositor";
+			reg = <0x9d11000 0x1000>;
+
+			clock-names = "compo_main",
+				      "compo_aux",
+				      "pix_main",
+				      "pix_aux",
+				      "pix_gdp1",
+				      "pix_gdp2",
+				      "pix_gdp3",
+				      "pix_gdp4",
+				      "main_parent",
+				      "aux_parent";
+
+			clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+				 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+				 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+				 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+				 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+				 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+				 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+				 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+				 <&clk_s_d2_quadfs 0>,
+				 <&clk_s_d2_quadfs 1>;
+
+			reset-names = "compo-main", "compo-aux";
+			resets = <&softreset STIH407_COMPO_SOFTRESET>,
+				 <&softreset STIH407_COMPO_SOFTRESET>;
+			st,vtg = <&vtg_main>, <&vtg_aux>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					compo_main_out: endpoint {
+						remote-endpoint = <&tvout_in0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					compo_aux_out: endpoint {
+						remote-endpoint = <&tvout_in1>;
+					};
+				};
+			};
+		};
+
+		tvout: encoder@8d08000 {
+			compatible = "st,stih407-tvout";
+			reg = <0x8d08000 0x1000>;
+			reg-names = "tvout-reg";
+			reset-names = "tvout";
+			resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+			assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+					  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+					  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+					  <&clk_s_d0_flexgen CLK_PCM_0>,
+					  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+					  <&clk_s_d2_flexgen CLK_HDDAC>;
+
+			assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+						 <&clk_tmdsout_hdmi>,
 						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d0_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>;
 
-			assigned-clock-rates = <297000000>,
-					       <297000000>,
-					       <0>,
-					       <400000000>,
-					       <400000000>;
-
-			ranges;
-
-			sti-compositor@9d11000 {
-				compatible = "st,stih407-compositor";
-				reg = <0x9d11000 0x1000>;
-
-				clock-names = "compo_main",
-					      "compo_aux",
-					      "pix_main",
-					      "pix_aux",
-					      "pix_gdp1",
-					      "pix_gdp2",
-					      "pix_gdp3",
-					      "pix_gdp4",
-					      "main_parent",
-					      "aux_parent";
-
-				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-
-				reset-names = "compo-main", "compo-aux";
-				resets = <&softreset STIH407_COMPO_SOFTRESET>,
-					 <&softreset STIH407_COMPO_SOFTRESET>;
-				st,vtg = <&vtg_main>, <&vtg_aux>;
-			};
-
-			sti-tvout@8d08000 {
-				compatible = "st,stih407-tvout";
-				reg = <0x8d08000 0x1000>;
-				reg-names = "tvout-reg";
-				reset-names = "tvout";
-				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+			ports {
 				#address-cells = <1>;
-				#size-cells = <1>;
-				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-						  <&clk_s_d0_flexgen CLK_PCM_0>,
-						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-						  <&clk_s_d2_flexgen CLK_HDDAC>;
-
-				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
-							 <&clk_tmdsout_hdmi>,
-							 <&clk_s_d2_quadfs 0>,
-							 <&clk_s_d0_quadfs 0>,
-							 <&clk_s_d2_quadfs 0>,
-							 <&clk_s_d2_quadfs 0>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					tvout_in0: endpoint {
+						remote-endpoint = <&compo_main_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					tvout_in1: endpoint {
+						remote-endpoint = <&compo_aux_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					tvout_out0: endpoint {
+						remote-endpoint = <&hdmi_in>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					tvout_out1: endpoint {
+						remote-endpoint = <&hda_in>;
+					};
+				};
 			};
+		};
 
-			sti_hdmi: sti-hdmi@8d04000 {
-				compatible = "st,stih407-hdmi";
-				reg = <0x8d04000 0x1000>;
-				reg-names = "hdmi-reg";
-				#sound-dai-cells = <0>;
-				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "irq";
-				clock-names = "pix",
-					      "tmds",
-					      "phy",
-					      "audio",
-					      "main_parent",
-					      "aux_parent";
-
-				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-					 <&clk_s_d0_flexgen CLK_PCM_0>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-
-				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
-				reset-names = "hdmi";
-				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
-				ddc = <&hdmiddc>;
+		sti_hdmi: hdmi@8d04000 {
+			compatible = "st,stih407-hdmi";
+			reg = <0x8d04000 0x1000>;
+			reg-names = "hdmi-reg";
+			#sound-dai-cells = <0>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irq";
+			clock-names = "pix",
+				      "tmds",
+				      "phy",
+				      "audio",
+				      "main_parent",
+				      "aux_parent";
+
+			clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+				 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+				 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+				 <&clk_s_d0_flexgen CLK_PCM_0>,
+				 <&clk_s_d2_quadfs 0>,
+				 <&clk_s_d2_quadfs 1>;
+
+			hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
+			reset-names = "hdmi";
+			resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+			ddc = <&hdmiddc>;
+
+			port {
+				hdmi_in: endpoint {
+					remote-endpoint = <&tvout_out0>;
+				};
 			};
+		};
 
-			sti-hda@8d02000 {
-				compatible = "st,stih407-hda";
-				status = "disabled";
-				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
-				reg-names = "hda-reg", "video-dacs-ctrl";
-				clock-names = "pix",
-					      "hddac",
-					      "main_parent",
-					      "aux_parent";
-				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-					 <&clk_s_d2_flexgen CLK_HDDAC>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
+		analog@8d02000 {
+			compatible = "st,stih407-hda";
+			status = "disabled";
+			reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+			reg-names = "hda-reg", "video-dacs-ctrl";
+			clock-names = "pix",
+				      "hddac",
+				      "main_parent",
+				      "aux_parent";
+			clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+				 <&clk_s_d2_flexgen CLK_HDDAC>,
+				 <&clk_s_d2_quadfs 0>,
+				 <&clk_s_d2_quadfs 1>;
+
+			port {
+				hda_in: endpoint {
+					remote-endpoint = <&tvout_out1>;
+				};
 			};
+		};
 
-			sti-hqvdp@9c00000 {
-				compatible = "st,stih407-hqvdp";
-				reg = <0x9C00000 0x100000>;
-				clock-names = "hqvdp", "pix_main";
-				clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
-				reset-names = "hqvdp";
-				resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
-				st,vtg = <&vtg_main>;
-			};
+		hqvdp: plane@9c00000 {
+			compatible = "st,stih407-hqvdp";
+			reg = <0x9C00000 0x100000>;
+			clock-names = "hqvdp", "pix_main";
+			clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+				 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+			reset-names = "hqvdp";
+			resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
+			st,vtg = <&vtg_main>;
 		};
 
 		bdisp0:bdisp@9f10000 {
@@ -285,5 +343,39 @@
 			resets = <&softreset STIH407_LPM_SOFTRESET>;
 			hdmi-phandle = <&sti_hdmi>;
 		};
+
+		gpu: gpu@9f00000 {
+			compatible = "st,stih410-mali", "arm,mali-400";
+			reg = <0x9f00000 0x10000>;
+			/* LIMA driver needs 2 clocks, use the same for both */
+			clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>,
+				 <&clk_s_c0_flexgen CLK_ICN_GPU>;
+			clock-names = "bus", "core";
+			assigned-clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
+			assigned-clock-rates = <400000000>;
+			resets = <&softreset STIH407_GPU_SOFTRESET>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pp2",
+					  "ppmmu2",
+					  "pp3",
+					  "ppmmu3";
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/st/stihxxx-b2120.dtsi b/arch/arm/boot/dts/st/stihxxx-b2120.dtsi
deleted file mode 100644
index 8d9a2dfa76f1..000000000000
--- a/arch/arm/boot/dts/st/stihxxx-b2120.dtsi
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- */
-#include <dt-bindings/clock/stih407-clks.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/media/c8sectpfe.h>
-/ {
-	leds {
-		compatible = "gpio-leds";
-		led-red {
-			label = "Front Panel LED";
-			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-		led-green {
-			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "STI-B2120";
-		status = "okay";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		simple-audio-card,dai-link@0 {
-			reg = <0>;
-			/* HDMI */
-			format = "i2s";
-			mclk-fs = <128>;
-			cpu {
-				sound-dai = <&sti_uni_player0>;
-			};
-
-			codec {
-				sound-dai = <&sti_hdmi>;
-			};
-		};
-
-		simple-audio-card,dai-link@1 {
-			reg = <1>;
-			/* DAC */
-			format = "i2s";
-			mclk-fs = <256>;
-			frame-inversion;
-			cpu {
-				sound-dai = <&sti_uni_player2>;
-			};
-
-			codec {
-				sound-dai = <&sti_sasg_codec 1>;
-			};
-		};
-
-		simple-audio-card,dai-link@2 {
-			reg = <2>;
-			/* SPDIF */
-			format = "left_j";
-			mclk-fs = <128>;
-			cpu {
-				sound-dai = <&sti_uni_player3>;
-			};
-
-			codec {
-				sound-dai = <&sti_sasg_codec 0>;
-			};
-		};
-	};
-
-	miphy28lp_phy: miphy28lp {
-
-		phy_port0: port@9b22000 {
-			st,osc-rdy;
-		};
-
-		phy_port1: port@9b2a000 {
-			st,osc-force-ext;
-		};
-	};
-
-	soc {
-		sbc_serial0: serial@9530000 {
-			status = "okay";
-		};
-
-		pwm0: pwm@9810000 {
-			status = "okay";
-		};
-
-		pwm1: pwm@9510000 {
-			status = "okay";
-		};
-
-		ssc2: i2c@9842000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		ssc3: i2c@9843000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		i2c@9844000 {
-			status = "okay";
-		};
-
-		i2c@9845000 {
-			status = "okay";
-		};
-
-		i2c@9540000 {
-			status = "okay";
-		};
-
-		mmc0: sdhci@9060000 {
-			non-removable;
-			status = "okay";
-		};
-
-		mmc1: sdhci@9080000 {
-			status = "okay";
-		};
-
-		/* SSC11 to HDMI */
-		hdmiddc: i2c@9541000 {
-			status = "okay";
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		st_dwc3: dwc3@8f94000 {
-			status = "okay";
-		};
-
-		ethernet0: dwmac@9630000 {
-			st,tx-retime-src = "clkgen";
-			status = "okay";
-			phy-mode = "rgmii";
-			fixed-link = <0 1 1000 0 0>;
-		};
-
-		demux@8a20000 {
-			compatible	= "st,stih407-c8sectpfe";
-			status		= "okay";
-			reg		= <0x08a20000 0x10000>,
-					  <0x08a00000 0x4000>;
-			reg-names	= "c8sectpfe", "c8sectpfe-ram";
-			interrupts	= <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-					  <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "c8sectpfe-error-irq",
-					  "c8sectpfe-idle-irq";
-			pinctrl-0	= <&pinctrl_tsin0_serial>;
-			pinctrl-1	= <&pinctrl_tsin0_parallel>;
-			pinctrl-2	= <&pinctrl_tsin3_serial>;
-			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
-			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
-			pinctrl-names	= "tsin0-serial",
-					  "tsin0-parallel",
-					  "tsin3-serial",
-					  "tsin4-serial",
-					  "tsin5-serial";
-			clocks		= <&clk_s_c0_flexgen CLK_PROC_STFE>;
-			clock-names	= "c8sectpfe";
-
-			/* tsin0 is TSA on NIMA */
-			tsin0: port {
-				tsin-num = <0>;
-				serial-not-parallel;
-				i2c-bus = <&ssc2>;
-				reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
-				dvb-card = <STV0367_TDA18212_NIMA_1>;
-			};
-		};
-
-		sti_uni_player0: sti-uni-player@8d80000 {
-			status = "okay";
-		};
-
-		sti_uni_player2: sti-uni-player@8d82000 {
-			status = "okay";
-		};
-
-		sti_uni_player3: sti-uni-player@8d85000 {
-			status = "okay";
-		};
-
-		syscfg_core: core-syscfg@92b0000 {
-			sti_sasg_codec: sti-sasg-codec {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spdif_out>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/st/stm32f746-disco.dts b/arch/arm/boot/dts/st/stm32f746-disco.dts
index 087de6f09629..b57dbdce2f40 100644
--- a/arch/arm/boot/dts/st/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f746-disco.dts
@@ -78,6 +78,24 @@
 		serial0 = &usart1;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		led-usr {
+			gpios = <&gpioi 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "User";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	usbotg_hs_phy: usb-phy {
 		#phy-cells = <0>;
 		compatible = "usb-nop-xceiv";
diff --git a/arch/arm/boot/dts/st/stm32f746.dtsi b/arch/arm/boot/dts/st/stm32f746.dtsi
index 2537b3d47e6f..208f8c6dfc9d 100644
--- a/arch/arm/boot/dts/st/stm32f746.dtsi
+++ b/arch/arm/boot/dts/st/stm32f746.dtsi
@@ -43,6 +43,7 @@
 #include "../armv7-m.dtsi"
 #include <dt-bindings/clock/stm32fx-clock.h>
 #include <dt-bindings/mfd/stm32f7-rcc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	#address-cells = <1>;
@@ -245,6 +246,39 @@
 			};
 		};
 
+		lptimer1: timer@40002400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x40002400 0x400>;
+			interrupts-extended = <&exti 23 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&rcc 1 CLK_LPTIMER>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@0 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
 		rtc: rtc@40002800 {
 			compatible = "st,stm32-rtc";
 			reg = <0x40002800 0x400>;
diff --git a/arch/arm/boot/dts/st/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts
index 52c5baf58ab9..535cfdc4681c 100644
--- a/arch/arm/boot/dts/st/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f769-disco.dts
@@ -79,13 +79,16 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led-green {
+		led-usr2 {
 			gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		led-red {
+		led-usr1 {
 			gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>;
 		};
+		led-usr3 {
+			gpios = <&gpioa 12 GPIO_ACTIVE_HIGH>;
+		};
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/st/stm32h7-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32h7-pinctrl.dtsi
index 7f1d234e1024..8a6db484383d 100644
--- a/arch/arm/boot/dts/st/stm32h7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32h7-pinctrl.dtsi
@@ -198,7 +198,7 @@
 		};
 	};
 
-	uart4_pins: uart4-0 {
+	uart4_pins_a: uart4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
 			bias-disable;
@@ -211,7 +211,20 @@
 		};
 	};
 
-	usart1_pins: usart1-0 {
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('J', 8, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('J', 9, AF8)>; /* UART8_RX */
+			bias-disable;
+		};
+	};
+
+	usart1_pins_a: usart1-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
 			bias-disable;
@@ -224,7 +237,20 @@
 		};
 	};
 
-	usart2_pins: usart2-0 {
+	usart1_pins_b: usart1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
 			bias-disable;
@@ -237,7 +263,7 @@
 		};
 	};
 
-	usart3_pins: usart3-0 {
+	usart3_pins_a: usart3-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
 				 <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
diff --git a/arch/arm/boot/dts/st/stm32h743.dtsi b/arch/arm/boot/dts/st/stm32h743.dtsi
index b8d4c44c8a82..2f19cfbc57ad 100644
--- a/arch/arm/boot/dts/st/stm32h743.dtsi
+++ b/arch/arm/boot/dts/st/stm32h743.dtsi
@@ -211,6 +211,14 @@
 			};
 		};
 
+		uart8: serial@40007c00 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			status = "disabled";
+			clocks = <&rcc UART8_CK>;
+		};
+
 		usart1: serial@40011000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40011000 0x400>;
diff --git a/arch/arm/boot/dts/st/stm32h743i-disco.dts b/arch/arm/boot/dts/st/stm32h743i-disco.dts
index 2b452883a708..8451a54a9a08 100644
--- a/arch/arm/boot/dts/st/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/st/stm32h743i-disco.dts
@@ -105,7 +105,7 @@
 };
 
 &usart2 {
-	pinctrl-0 = <&usart2_pins>;
+	pinctrl-0 = <&usart2_pins_a>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/st/stm32h743i-eval.dts b/arch/arm/boot/dts/st/stm32h743i-eval.dts
index 5c5d8059bdc7..4b0ced27b80e 100644
--- a/arch/arm/boot/dts/st/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/st/stm32h743i-eval.dts
@@ -145,7 +145,7 @@
 };
 
 &usart1 {
-	pinctrl-0 = <&usart1_pins>;
+	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/st/stm32h747i-disco.dts b/arch/arm/boot/dts/st/stm32h747i-disco.dts
new file mode 100644
index 000000000000..99f0255dae8e
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32h747i-disco.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+/dts-v1/;
+#include "stm32h743.dtsi"
+#include "stm32h7-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32H747i-Discovery board";
+	compatible = "st,stm32h747i-disco", "st,stm32h747";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@d0000000 {
+		device_type = "memory";
+		reg = <0xd0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+		serial1 = &uart8;
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpioi 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-orange {
+			gpios = <&gpioi 13 GPIO_ACTIVE_LOW>;
+		};
+		led-red {
+			gpios = <&gpioi 14 GPIO_ACTIVE_LOW>;
+		};
+		led-blue {
+			gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "User";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
+		};
+		button-1 {
+			label = "JoySel";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpiok 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-2 {
+			label = "JoyDown";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpiok 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-3 {
+			label = "JoyUp";
+			linux,code = <KEY_UP>;
+			gpios = <&gpiok 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-4 {
+			label = "JoyLeft";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpiok 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+		button-5 {
+			label = "JoyRight";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpiok 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&mac {
+	status = "disabled";
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-0 = <&uart8_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/st/stm32h750i-art-pi.dts b/arch/arm/boot/dts/st/stm32h750i-art-pi.dts
index 44c307f8b09c..56c53e262da7 100644
--- a/arch/arm/boot/dts/st/stm32h750i-art-pi.dts
+++ b/arch/arm/boot/dts/st/stm32h750i-art-pi.dts
@@ -167,7 +167,7 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -197,14 +197,14 @@
 };
 
 &usart2 {
-	pinctrl-0 = <&usart2_pins>;
+	pinctrl-0 = <&usart2_pins_a>;
 	pinctrl-names = "default";
 	status = "disabled";
 };
 
 &usart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&usart3_pins>;
+	pinctrl-0 = <&usart3_pins_a>;
 	dmas = <&dmamux1 45 0x400 0x05>,
 	       <&dmamux1 46 0x400 0x05>;
 	dma-names = "rx", "tx";
@@ -221,7 +221,7 @@
 };
 
 &uart4 {
-	pinctrl-0 = <&uart4_pins>;
+	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index e1a764d269d2..b9657ff91c23 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -29,6 +29,12 @@
 		interrupt-parent = <&intc>;
 	};
 
+	arm_wdt: watchdog {
+		compatible = "arm,smc-wdt";
+		arm,smc-id = <0xbc000000>;
+		status = "disabled";
+	};
+
 	firmware {
 		optee {
 			method = "smc";
@@ -100,6 +106,31 @@
 		always-on;
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&dts>;
+
+			trips {
+				cpu_alert1: cpu-alert1 {
+					temperature = <85000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -261,6 +292,11 @@
 			dma-names = "up";
 			status = "disabled";
 
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+
 			timer@5 {
 				compatible = "st,stm32h7-timer-trigger";
 				reg = <5>;
@@ -281,6 +317,11 @@
 			dma-names = "up";
 			status = "disabled";
 
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+
 			timer@6 {
 				compatible = "st,stm32h7-timer-trigger";
 				reg = <6>;
@@ -909,6 +950,23 @@
 			};
 		};
 
+		dts: thermal@50028000 {
+			compatible = "st,stm32-thermal";
+			reg = <0x50028000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DTS>;
+			clock-names = "pclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		hdp: pinctrl@5002a000 {
+			compatible = "st,stm32mp131-hdp";
+			reg = <0x5002a000 0x400>;
+			clocks = <&rcc HDP>;
+			status = "disabled";
+		};
+
 		mdma: dma-controller@58000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x58000000 0x1000>;
@@ -948,6 +1006,7 @@
 		iwdg2: watchdog@5a002000 {
 			compatible = "st,stm32mp1-iwdg";
 			reg = <0x5a002000 0x400>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
 			clock-names = "pclk", "lsi";
 			status = "disabled";
@@ -973,6 +1032,9 @@
 				reg = <0x4 0x2>;
 				bits = <0 12>;
 			};
+			vrefint: vrefin-cal@52 {
+				reg = <0x52 0x2>;
+			};
 			ts_cal1: calib@5c {
 				reg = <0x5c 0x2>;
 			};
@@ -1018,6 +1080,8 @@
 					interrupts = <0>;
 					dmas = <&dmamux1 10 0x400 0x80000001>;
 					dma-names = "rx";
+					nvmem-cells = <&vrefint>;
+					nvmem-cell-names = "vrefint";
 					status = "disabled";
 
 					channel@13 {
@@ -1196,6 +1260,11 @@
 				access-controllers = <&etzpc 23>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -1221,6 +1290,11 @@
 				access-controllers = <&etzpc 24>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -1246,6 +1320,11 @@
 				access-controllers = <&etzpc 25>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -1276,6 +1355,11 @@
 				access-controllers = <&etzpc 26>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -1304,6 +1388,11 @@
 				access-controllers = <&etzpc 27>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -1332,6 +1421,11 @@
 				access-controllers = <&etzpc 28>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -1522,11 +1616,13 @@
 					      "mac-clk-tx",
 					      "mac-clk-rx",
 					      "ethstp",
+					      "ptp_ref",
 					      "eth-ck";
 				clocks = <&rcc ETH1MAC>,
 					 <&rcc ETH1TX>,
 					 <&rcc ETH1RX>,
 					 <&rcc ETH1STP>,
+					 <&rcc ETH1PTP_K>,
 					 <&rcc ETH1CK_K>;
 				st,syscon = <&syscfg 0x4 0xff0000>;
 				snps,mixed-burst;
@@ -1534,6 +1630,8 @@
 				snps,axi-config = <&stmmac_axi_config_1>;
 				snps,tso;
 				access-controllers = <&etzpc 48>;
+				nvmem-cells = <&ethernet_mac1_address>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 
 				stmmac_axi_config_1: stmmac-axi-config {
@@ -1566,6 +1664,16 @@
 					reg = <1>;
 				};
 			};
+
+			iwdg1: watchdog@5c003000 {
+				compatible = "st,stm32mp1-iwdg";
+				reg = <0x5c003000 0x400>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc IWDG1>, <&scmi_clk CK_SCMI_LSI>;
+				clock-names = "pclk", "lsi";
+				access-controllers = <&etzpc 12>;
+				status = "disabled";
+			};
 		};
 
 		/*
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index 73e470019ce4..053fc6691205 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -60,6 +60,8 @@
 			interrupts = <0>;
 			dmas = <&dmamux1 9 0x400 0x80000001>;
 			dma-names = "rx";
+			nvmem-cells = <&vrefint>;
+			nvmem-cell-names = "vrefint";
 			status = "disabled";
 
 			channel@18 {
@@ -79,11 +81,13 @@
 			      "mac-clk-tx",
 			      "mac-clk-rx",
 			      "ethstp",
+			      "ptp_ref",
 			      "eth-ck";
 		clocks = <&rcc ETH2MAC>,
 			 <&rcc ETH2TX>,
 			 <&rcc ETH2RX>,
 			 <&rcc ETH2STP>,
+			 <&rcc ETH2PTP_K>,
 			 <&rcc ETH2CK_K>;
 		st,syscon = <&syscfg 0x4 0xff000000>;
 		snps,mixed-burst;
@@ -91,6 +95,8 @@
 		snps,axi-config = <&stmmac_axi_config_2>;
 		snps,tso;
 		access-controllers = <&etzpc 49>;
+		nvmem-cells = <&ethernet_mac2_address>;
+		nvmem-cell-names = "mac-address";
 		status = "disabled";
 
 		stmmac_axi_config_2: stmmac-axi-config {
diff --git a/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts b/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts
new file mode 100644
index 000000000000..663b6de1b814
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
+#include "stm32mp133.dtsi"
+#include "stm32mp13xc.dtsi"
+#include "stm32mp13-pinctrl.dtsi"
+
+/ {
+	model = "Priva E-Measuringbox board";
+	compatible = "pri,prihmb", "st,stm32mp133";
+
+	aliases {
+		ethernet0 = &ethernet1;
+		mdio-gpio0 = &mdio0;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+		serial1 = &usart6;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	counter-0 {
+		compatible = "interrupt-counter";
+		gpios = <&gpioa 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-reset {
+			label = "reset-button";
+			linux,code = <BTN_1>;
+			gpios = <&gpioi 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	led-controller-0 {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+
+			led-red {
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm2 2 1000000 1>;
+			};
+
+			led-green {
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm1 1 1000000 1>;
+			};
+
+			led-blue {
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm1 2 1000000 1>;
+			};
+		};
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+
+			led-red {
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm1 0 1000000 1>;
+			};
+
+			led-green {
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm2 0 1000000 1>;
+			};
+
+			led-blue {
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm2 1 1000000 1>;
+			};
+		};
+	};
+
+	/* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce
+	 * stmmac MDC clock without reducing system bus rate, we need to use
+	 * gpio based MDIO bus.
+	 */
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpiog 2 GPIO_ACTIVE_HIGH
+			 &gpioa 2 GPIO_ACTIVE_HIGH>;
+
+		/* TI DP83TD510E */
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id2000.0181";
+			reg = <0>;
+			interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10>;
+			reset-deassert-us = <35>;
+		};
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x10000000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		optee@ce000000 {
+			reg = <0xce000000 0x02000000>;
+			no-map;
+		};
+	};
+};
+
+&adc_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc_1_pins_a>;
+	vdda-supply = <&reg_3v3>;
+	vref-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+
+	channel@0 { /* Fan current PC0*/
+		reg = <0>;
+		st,min-sample-time-ns = <10000>;  /* 10µs sampling time */
+	};
+	channel@11 { /* Fan voltage */
+		reg = <11>;
+		st,min-sample-time-ns = <10000>;  /* 10µs sampling time */
+	};
+	channel@15 { /* Supply voltage */
+		reg = <15>;
+		st,min-sample-time-ns = <10000>;  /* 10µs sampling time */
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet1 {
+	status = "okay";
+	pinctrl-0 = <&ethernet1_rmii_pins_a>;
+	pinctrl-1 = <&ethernet1_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	clock-frequency = <100000>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	board-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+		vs-supply = <&reg_3v3>;
+	};
+};
+
+&{i2c1_pins_a/pins} {
+	pinmux = <STM32_PINMUX('D', 3, AF5)>, /* I2C1_SCL */
+		 <STM32_PINMUX('B', 8, AF4)>; /* I2C1_SDA */
+	bias-disable;
+	drive-open-drain;
+	slew-rate = <0>;
+};
+
+&{i2c1_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('D', 3, ANALOG)>, /* I2C1_SCL */
+		 <STM32_PINMUX('B', 8, ANALOG)>; /* I2C1_SDA */
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+/* SD card without Card-detect */
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+/* EMMC */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	mmc-ddr-3_3v;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&timers1 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pwm1: pwm {
+		pinctrl-0 = <&pwm1_pins_a>;
+		pinctrl-1 = <&pwm1_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&timers4 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pwm2: pwm {
+		pinctrl-0 = <&pwm4_pins_a>;
+		pinctrl-1 = <&pwm4_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+/* Fan PWM */
+&timers5 {
+	status = "okay";
+
+	pwm3: pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&timers2 {
+	status = "okay";
+
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-1 = <&uart7_sleep_pins_a>;
+	pinctrl-2 = <&uart7_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usart6 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart6_pins_a>;
+	pinctrl-1 = <&usart6_sleep_pins_a>;
+	pinctrl-2 = <&usart6_idle_pins_a>;
+	linux,rs485-enabled-at-boot-time;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&pinctrl {
+	adc_1_pins_a: adc1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1 in0 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ADC1 in15 */
+				 <STM32_PINMUX('F', 13, ANALOG)>; /* ADC1 in11 */
+		};
+	};
+
+	ethernet1_rmii_pins_a: rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>;   /* ETH1_RMII_REF_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	ethernet1_rmii_sleep_pins_a: rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+
+	pwm1_pins_a: pwm1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 13, AF1)>; /* TIM1_CH3 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_sleep_pins_a: pwm1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 13, ANALOG)>; /* TIM1_CH3 */
+		};
+	};
+
+	pwm4_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF2)>, /* TIM4_CH1 */
+				 <STM32_PINMUX('B', 7, AF2)>, /* TIM4_CH2 */
+				 <STM32_PINMUX('D', 14, AF2)>; /* TIM4_CH3 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* TIM4_CH1 */
+				 <STM32_PINMUX('B', 7, ANALOG)>, /* TIM4_CH2 */
+				 <STM32_PINMUX('D', 14, ANALOG)>; /* TIM4_CH3 */
+		};
+	};
+	pwm5_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
+		};
+	};
+
+	pwm5_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
+		};
+	};
+
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart7_idle_pins_a: uart7-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>; /* UART7_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart7_sleep_pins_a: uart7-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('E', 10, ANALOG)>; /* UART7_RX */
+		};
+	};
+
+	usart6_pins_a: usart6-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, AF7)>, /* USART6_TX */
+				 <STM32_PINMUX('F', 10, AF7)>; /* USART6_DE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('H', 11, AF7)>; /* USART6_RX */
+			bias-disable;
+		};
+	};
+
+	usart6_idle_pins_a: usart6-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>; /* USART6_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 10, AF7)>; /* USART6_DE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('H', 11, AF7)>; /* USART6_RX */
+			bias-disable;
+		};
+	};
+
+	usart6_sleep_pins_a: usart6-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* USART6_TX */
+				 <STM32_PINMUX('F', 10, ANALOG)>, /* USART6_DE */
+				 <STM32_PINMUX('H', 11, ANALOG)>; /* USART6_RX */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
index 853dc21449d9..9902849ed040 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts
@@ -176,7 +176,7 @@
 	gpio-line-names = "", "", "", "",
 			  "", "DHSBC_USB_PWR_CC1", "", "",
 			  "", "", "", "DHSBC_nETH1_RST",
-			  "", "DHCOR_HW-CODING_0", "", "";
+			  "", "DHCOR_HW-CODING_0", "", "DHSBC_HW-CODE_2";
 };
 
 &gpiob {
@@ -197,7 +197,7 @@
 	gpio-line-names = "", "", "", "",
 			  "", "DHCOR_RAM-CODING_0", "", "",
 			  "", "DHCOR_RAM-CODING_1", "", "",
-			  "", "", "", "";
+			  "", "DHSBC_HW-CODE_1", "", "";
 };
 
 &gpioe {
@@ -221,6 +221,13 @@
 			  "DHSBC_ETH1_INTB", "", "", "DHSBC_ETH2_INTB";
 };
 
+&gpioh {
+	gpio-line-names = "", "", "", "DHSBC_HW-CODE_0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
 &gpioi {
 	gpio-line-names = "DHCOR_RTC_nINT", "DHCOR_HW-CODING_1",
 			  "DHCOR_BT_REG_ON", "DHCOR_PMIC_nINT",
@@ -296,6 +303,9 @@
 	st33htph: tpm@0 {
 		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
 		reg = <0>;
+		interrupt-parent = <&gpioe>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioe 12 GPIO_ACTIVE_LOW>;
 		spi-max-frequency = <24000000>;
 	};
 };
@@ -419,3 +429,19 @@
 		type = "micro";
 	};
 };
+
+/* LDO2 is expansion connector 3V3 supply on STM32MP13xx DHCOR DHSBC rev.200 */
+&vdd_ldo2 {
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+/* LDO5 is carrier board 3V3 supply on STM32MP13xx DHCOR DHSBC rev.200 */
+&vdd_sd {
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index 3a276589fef7..f894ee35b3db 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -161,6 +161,11 @@
 	};
 };
 
+&arm_wdt {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
 &crc1 {
 	status = "okay";
 };
@@ -421,7 +426,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
@@ -440,6 +445,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		/* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 func */
 		pinctrl-0 = <&pwm3_pins_a>;
@@ -456,6 +464,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		/* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 func */
 		pinctrl-0 = <&pwm4_pins_a>;
@@ -472,6 +483,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		/* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 func */
 		pinctrl-0 = <&pwm8_pins_a>;
@@ -486,6 +500,9 @@
 
 &timers14 {
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		/* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 func */
 		pinctrl-0 = <&pwm14_pins_a>;
diff --git a/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
index 5edbc790d1d2..c18156807027 100644
--- a/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
@@ -85,8 +85,8 @@
 
 			vddcpu: buck1 { /* VDD_CPU_1V2 */
 				regulator-name = "vddcpu";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-initial-mode = <0>;
 				regulator-over-current-protection;
@@ -201,17 +201,17 @@
 		pagesize = <64>;
 	};
 
-	eeprom0wl: eeprom@58 {
-		compatible = "st,24256e-wl";	/* ST M24256E WL page of 0x50 */
-		pagesize = <64>;
-		reg = <0x58>;
-	};
-
 	rv3032: rtc@51 {
 		compatible = "microcrystal,rv3032";
 		reg = <0x51>;
 		interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>;
 	};
+
+	eeprom0wl: eeprom@58 {
+		compatible = "st,24256e-wl";	/* ST M24256E WL page of 0x50 */
+		pagesize = <64>;
+		reg = <0x58>;
+	};
 };
 
 &iwdg2 {
@@ -287,7 +287,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {	/* muRata 1YN */
+	brcmf: wifi@1 {	/* muRata 1YN */
 		reg = <1>;
 		compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpioe>;
diff --git a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
index 95fafc51a1c8..8613a6a17ee9 100644
--- a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
@@ -5,6 +5,14 @@
  */
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
+&hdp {
+	/omit-if-no-ref/
+	hdp2_gpo: hdp2-pins {
+		function = "gpoval2";
+		pins = "HDP2";
+	};
+};
+
 &pinctrl {
 	/omit-if-no-ref/
 	adc1_ain_pins_a: adc1-ain-0 {
@@ -26,6 +34,13 @@
 	};
 
 	/omit-if-no-ref/
+	adc1_in10_pins_a: adc1-in10-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>;
+		};
+	};
+
+	/omit-if-no-ref/
 	adc12_ain_pins_a: adc12-ain-0 {
 		pins {
 			pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
@@ -585,6 +600,43 @@
 	};
 
 	/omit-if-no-ref/
+	ethernet0_rmii_pins_d: rmii-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	ethernet0_rmii_sleep_pins_d: rmii-sleep-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
+		};
+	};
+
+	/omit-if-no-ref/
 	fmc_pins_a: fmc-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
@@ -688,6 +740,23 @@
 	};
 
 	/omit-if-no-ref/
+	hdp2_pins_a: hdp2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 13, AF0)>; /* HDP2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	/omit-if-no-ref/
+	hdp2_sleep_pins_a: hdp2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 13, ANALOG)>; /* HDP2 */
+		};
+	};
+
+	/omit-if-no-ref/
 	i2c1_pins_a: i2c1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
@@ -726,6 +795,25 @@
 	};
 
 	/omit-if-no-ref/
+	i2c1_pins_c: i2c1-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c1_sleep_pins_c: i2c1-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
 	i2c2_pins_a: i2c2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
@@ -820,6 +908,27 @@
 	};
 
 	/omit-if-no-ref/
+	i2s1_pins_a: i2s1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>, /* I2S2_SDI */
+				 <STM32_PINMUX('A', 4, AF5)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 5, AF5)>; /* I2S2_CK */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2s1_sleep_pins_a: i2s1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 6, ANALOG)>, /* I2S2_SDI */
+				 <STM32_PINMUX('A', 4, ANALOG)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 5, ANALOG)>; /* I2S2_CK */
+		};
+	};
+
+	/omit-if-no-ref/
 	i2s2_pins_a: i2s2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
@@ -1221,6 +1330,20 @@
 	};
 
 	/omit-if-no-ref/
+	m4_leds_orange_pins_a: m4-leds-orange-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 7, RSVD)>;
+		};
+	};
+
+	/omit-if-no-ref/
+	m4_leds_orange_pins_b: m4-leds-orange-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 8, RSVD)>;
+		};
+	};
+
+	/omit-if-no-ref/
 	mco1_pins_a: mco1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
@@ -1419,6 +1542,23 @@
 	};
 
 	/omit-if-no-ref/
+	pwm1_pins_d: pwm1-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm1_sleep_pins_d: pwm1-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, ANALOG)>;
+		};
+	};
+
+	/omit-if-no-ref/
 	pwm2_pins_a: pwm2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
@@ -2161,6 +2301,66 @@
 	};
 
 	/omit-if-no-ref/
+	sdmmc2_b4_pins_c: sdmmc2-b4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_od_pins_c: sdmmc2-b4-od-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_b4_sleep_pins_c: sdmmc2-b4-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
 	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
@@ -2390,6 +2590,66 @@
 	};
 
 	/omit-if-no-ref/
+	sdmmc3_b4_pins_c: sdmmc3-b4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_od_pins_c: sdmmc3-b4-od-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc3_b4_sleep_pins_c: sdmmc3-b4-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
+	/omit-if-no-ref/
 	spdifrx_pins_a: spdifrx-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
@@ -2601,6 +2861,41 @@
 	};
 
 	/omit-if-no-ref/
+	uart4_pins_e: uart4-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_idle_pins_e: uart4-idle-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_sleep_pins_e: uart4-sleep-4 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 8, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	/omit-if-no-ref/
 	uart5_pins_a: uart5-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
@@ -2678,6 +2973,23 @@
 	};
 
 	/omit-if-no-ref/
+	uart7_pins_d: uart7-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF7)>, /* UART7_TX */
+				 <STM32_PINMUX('F', 8, AF7)>; /* UART7_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('F', 9, AF7)>; /* UART7_CTS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
 	uart8_pins_a: uart8-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
@@ -3119,6 +3431,25 @@
 	};
 
 	/omit-if-no-ref/
+	i2c6_pins_b: i2c6-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, AF2)>, /* I2C6_SCL */
+				 <STM32_PINMUX('A', 12, AF2)>; /* I2C6_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c6_sleep_pins_b: i2c6-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C6_SCL */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C6_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
 	spi1_pins_a: spi1-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
diff --git a/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi b/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi
index dc3b09f2f2af..98552fe45d4e 100644
--- a/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi
@@ -4,11 +4,15 @@
  * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
  */
 
+#include <dt-bindings/regulator/st,stm32mp15-regulator.h>
+
 / {
 	firmware {
 		optee: optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		};
 
 		scmi: scmi {
@@ -35,21 +39,21 @@
 					#size-cells = <0>;
 
 					scmi_reg11: regulator@0 {
-						reg = <0>;
+						reg = <VOLTD_SCMI_REG11>;
 						regulator-name = "reg11";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <1100000>;
 					};
 
 					scmi_reg18: regulator@1 {
-						reg = <1>;
+						reg = <VOLTD_SCMI_REG18>;
 						regulator-name = "reg18";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <1800000>;
 					};
 
 					scmi_usb33: regulator@2 {
-						reg = <2>;
+						reg = <VOLTD_SCMI_USB33>;
 						regulator-name = "usb33";
 						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index b28dc90926bd..b1b568dfd126 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -129,7 +129,7 @@
 			reg = <0x4c001000 0x400>;
 			st,proc-id = <0>;
 			interrupts-extended =
-				<&exti 61 1>,
+				<&exti 61 IRQ_TYPE_LEVEL_HIGH>,
 				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "rx", "tx";
 			clocks = <&rcc IPCC>;
@@ -270,6 +270,13 @@
 			status = "disabled";
 		};
 
+		hdp: pinctrl@5002a000 {
+			compatible = "st,stm32mp151-hdp";
+			reg = <0x5002a000 0x400>;
+			clocks = <&rcc HDP>;
+			status = "disabled";
+		};
+
 		mdma1: dma-controller@58000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x58000000 0x1000>;
@@ -578,6 +585,11 @@
 				access-controllers = <&etzpc 20>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				timer@5 {
 					compatible = "st,stm32h7-timer-trigger";
 					reg = <5>;
@@ -599,6 +611,11 @@
 				access-controllers = <&etzpc 21>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				timer@6 {
 					compatible = "st,stm32h7-timer-trigger";
 					reg = <6>;
@@ -618,6 +635,11 @@
 				access-controllers = <&etzpc 22>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -643,6 +665,11 @@
 				access-controllers = <&etzpc 23>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -668,6 +695,11 @@
 				access-controllers = <&etzpc 24>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -1116,6 +1148,11 @@
 				access-controllers = <&etzpc 54>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -1144,11 +1181,17 @@
 				access-controllers = <&etzpc 55>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
 					status = "disabled";
 				};
+
 				timer@15 {
 					compatible = "st,stm32h7-timer-trigger";
 					reg = <15>;
@@ -1171,6 +1214,11 @@
 				access-controllers = <&etzpc 56>;
 				status = "disabled";
 
+				counter {
+					compatible = "st,stm32-timer-counter";
+					status = "disabled";
+				};
+
 				pwm {
 					compatible = "st,stm32-pwm";
 					#pwm-cells = <3>;
@@ -1740,7 +1788,6 @@
 				st,syscon = <&syscfg 0x4>;
 				snps,mixed-burst;
 				snps,pbl = <2>;
-				snps,en-tx-lpi-clockgating;
 				snps,axi-config = <&stmmac_axi_config_0>;
 				snps,tso;
 				access-controllers = <&etzpc 94>;
diff --git a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
new file mode 100644
index 000000000000..5d219a448763
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/dts-v1/;
+
+#include <arm/st/stm32mp151.dtsi>
+#include <arm/st/stm32mp15xc.dtsi>
+#include <arm/st/stm32mp15-pinctrl.dtsi>
+#include <arm/st/stm32mp15xxad-pinctrl.dtsi>
+#include <arm/st/stm32mp15-scmi.dtsi>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Plymovent AQM board";
+	compatible = "ply,plyaqm", "st,stm32mp151";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &uart7;
+	};
+
+	codec {
+		compatible = "invensense,ics43432";
+
+		port {
+			codec_endpoint: endpoint {
+				remote-endpoint = <&i2s1_endpoint>;
+				dai-format = "i2s";
+			};
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>; /* WHITE_EN */
+			color = <LED_COLOR_ID_WHITE>;
+			default-state = "on";
+		};
+	};
+
+	v3v3: fixed-regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	v5v_sw: fixed-regulator-v5sw {
+		compatible = "regulator-fixed";
+		regulator-name = "5v-switched";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpioe 10 GPIO_ACTIVE_HIGH>; /* 5V_SWITCHED_EN */
+		startup-delay-us = <100000>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		optee@cfd00000 {
+			reg = <0xcfd00000 0x300000>;
+			no-map;
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP15";
+		dais = <&i2s1_port>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpioe 12 GPIO_ACTIVE_LOW>; /* WLAN_REG_ON */
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_in10_pins_a>;
+	vdda-supply = <&v3v3>;
+	vref-supply = <&v3v3>;
+	status = "okay";
+
+	adc@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@10 { /* NTC */
+			reg = <10>;
+			st,min-sample-time-ns = <10000>;  /* 10µs sampling time */
+		};
+	};
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+	status = "okay";
+};
+
+&ethernet0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ethernet0_rmii_pins_d>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_d>;
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		/* KSZ8081RNA PHY */
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpiob 0 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpiob 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "HWID_PL_N", "HWID_CP", "";
+};
+
+&gpiob {
+	gpio-line-names =
+		"", "", "", "", "", "", "LED_LATCH", "",
+		"", "RELAY1_EN", "", "", "", "", "", "";
+};
+
+&gpioc {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "HWID_Q7", "", "";
+};
+
+&gpioe {
+	gpio-line-names =
+		"", "", "", "", "RELAY2_EN", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpiog {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "SW1",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_c>;
+	pinctrl-1 = <&i2c1_sleep_pins_c>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	clocks = <&scmi_clk CK_SCMI_I2C4>;
+	resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&i2c6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c6_pins_b>;
+	pinctrl-1 = <&i2c6_sleep_pins_b>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clocks = <&scmi_clk CK_SCMI_I2C6>;
+	resets = <&scmi_reset RST_SCMI_I2C6>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pressure-sensor@47 {
+		compatible = "bosch,bmp580";
+		reg = <0x47>;
+		vdda-supply = <&v5v_sw>;
+		vddd-supply = <&v5v_sw>;
+	};
+
+	co2-sensor@62 {
+		compatible = "sensirion,scd41";
+		reg = <0x62>;
+		vdd-supply = <&v5v_sw>;
+	};
+
+	pm-sensor@69 {
+		compatible = "sensirion,sps30";
+		reg = <0x69>;
+	};
+};
+
+&i2s1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2s1_pins_a>;
+	pinctrl-1 = <&i2s1_sleep_pins_a>;
+	clocks = <&rcc SPI1>, <&rcc SPI1_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "i2sclk", "x8k", "x11k";
+	#clock-cells = <0>; /* Set I2S2 as master clock provider */
+	status = "okay";
+
+	i2s1_port: port {
+		i2s1_endpoint: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&codec_endpoint>;
+		};
+	};
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+	status = "okay";
+};
+
+&m4_rproc {
+	/delete-property/ st,syscfg-holdboot;
+	resets = <&scmi_reset RST_SCMI_MCU>,
+		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+	reset-names = "mcu_rst", "hold_boot";
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
+
+/* SD card without Card-detect */
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+/* EMMC */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_c &sdmmc2_d47_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_c &sdmmc2_d47_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_c &sdmmc2_d47_sleep_pins_b>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+/* Wifi */
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_c>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_c>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_c>;
+	non-removable;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&timers5 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pwm {
+		pinctrl-0 = <&pwm1_pins_d>;
+		pinctrl-1 = <&pwm1_sleep_pins_d>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_e>;
+	pinctrl-1 = <&uart4_idle_pins_e>;
+	pinctrl-2 = <&uart4_sleep_pins_e>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_d>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>; /* BT_REG_ON */
+		max-speed = <4000000>;
+		vbat-supply = <&v3v3>;
+		vddio-supply = <&v3v3>;
+		interrupt-parent = <&gpiog>;
+		interrupts = <12 IRQ_TYPE_EDGE_RISING>; /* BT_HOST_WAKE */
+		interrupt-names = "host-wakeup";
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp153.dtsi b/arch/arm/boot/dts/st/stm32mp153.dtsi
index 4640dafb1598..92794b942ab2 100644
--- a/arch/arm/boot/dts/st/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp153.dtsi
@@ -40,6 +40,7 @@
 		interrupt-names = "int0", "int1";
 		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 		clock-names = "hclk", "cclk";
+		resets = <&rcc FDCAN_R>;
 		bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
 		access-controllers = <&etzpc 62>;
 		status = "disabled";
@@ -54,6 +55,7 @@
 		interrupt-names = "int0", "int1";
 		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 		clock-names = "hclk", "cclk";
+		resets = <&rcc FDCAN_R>;
 		bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 		access-controllers = <&etzpc 62>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts
new file mode 100644
index 000000000000..3a0e84262424
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen1.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2024 Leonard Göhrs, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp153c-lxa-fairytux2.dtsi"
+
+/ {
+	model = "Linux Automation GmbH FairyTux 2 Gen 1";
+	compatible = "lxa,stm32mp153c-fairytux2-gen1", "oct,stm32mp153x-osd32", "st,stm32mp153";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-left {
+			label = "USER_BTN1";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpioi 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+
+		button-right {
+			label = "USER_BTN2";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioe 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+};
+
+&gpiof {
+	gpio-line-names = "GPIO1", "GPIO2", "", "", "",			/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioh {
+	gpio-line-names = "", "", "", "", "LCD_RESET",			/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "GPIO3", "",			/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioi {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "", "ETH_", "",			/*  5 */
+			  "", "USER_BTN1";				/* 10 */
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-1 = <&i2c1_sleep_pins_b>;
+	status = "okay";
+
+	io_board_gpio: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&v3v3_hdmi>;
+		gpio-line-names = "LED1_GA_YK", "LED2_GA_YK", "LED1_GK_YA", "LED2_GK_YA",
+				  "RS485_EN", "RS485_120R", "", "CAN_120R";
+	};
+};
+
+&led_controller_io {
+	/*
+	 * led-2 and led-3 are internally connected antiparallel to one
+	 * another inside the ethernet jack like this:
+	 * GPIO1 ---+---|led-2|>--+--- GPIO3
+	 *          +--<|led-3|---+
+	 * E.g. only one of the LEDs can be illuminated at a time while
+	 * the other output must be driven low.
+	 * This should likely be implemented using a multi color LED
+	 * driver for antiparallel LEDs.
+	 */
+	led-2 {
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_ACTIVITY;
+		gpios = <&io_board_gpio 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	led-3 {
+		color = <LED_COLOR_ID_ORANGE>;
+		function = LED_FUNCTION_ACTIVITY;
+		gpios = <&io_board_gpio 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usart3 {
+	/*
+	 * On Gen 1 FairyTux 2 only RTS can be used and not CTS as well,
+	 * Because pins PD11 (CTS) and PI11 (USER_BTN1) share the same
+	 * interrupt and only one of them can be used at a time.
+	 */
+	rts-gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts
new file mode 100644
index 000000000000..66e6da912508
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2-gen2.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2024 Leonard Göhrs, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp153c-lxa-fairytux2.dtsi"
+
+/ {
+	model = "Linux Automation GmbH FairyTux 2 Gen 2";
+	compatible = "lxa,stm32mp153c-fairytux2-gen2", "oct,stm32mp153x-osd32", "st,stm32mp153";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-left {
+			label = "USER_BTN1";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+
+		button-right {
+			label = "USER_BTN2";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioe 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+};
+
+&gpiof {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioh {
+	gpio-line-names = "", "", "", "", "LCD_RESET",			/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "GPIO1", "GPIO_INT", "",		/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioi {
+	gpio-line-names = "GPIO2", "", "", "", "",			/*  0 */
+			  "", "", "", "ETH_", "",			/*  5 */
+			  "", "USER_BTN1";				/* 10 */
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-1 = <&i2c1_sleep_pins_b>;
+	status = "okay";
+
+	io_board_gpio: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpioh>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&board_tca6408_pins>;
+		#interrupt-cells = <2>;
+		vcc-supply = <&v3v3_hdmi>;
+		gpio-line-names = "LED1_GA_YK", "LED2_GA_YK", "LED1_GK_YA", "USB_CC_ALERT",
+				  "RS485_EN", "RS485_120R", "USB_CC_RESET", "CAN_120R";
+	};
+
+	usb_c: typec@28 {
+		compatible = "st,stusb1600";
+		reg = <0x28>;
+		interrupt-parent = <&io_board_gpio>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&reg_5v>;
+		vsys-supply = <&v3v3_hdmi>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			typec-power-opmode = "default";
+
+			port {
+				con_usbotg_hs_ep: endpoint {
+					remote-endpoint = <&usbotg_hs_ep>;
+				};
+			};
+		};
+	};
+
+	temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		/*
+		 * The sensor itself is powered by a voltage divider from the
+		 * always-on 5V supply.
+		 * The required pull-up resistors however are on v3v3_hdmi.
+		 */
+		vs-supply = <&v3v3_hdmi>;
+	};
+
+	io_board_eeprom: eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		vcc-supply = <&v3v3_hdmi>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_controller_io {
+	led-2 {
+		color = <LED_COLOR_ID_ORANGE>;
+		function = LED_FUNCTION_ACTIVITY;
+		gpios = <&io_board_gpio 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usart3 {
+	rts-gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpiod 11 GPIO_ACTIVE_LOW>;
+};
+
+&usbotg_hs {
+	usb-role-switch;
+
+	port {
+		usbotg_hs_ep: endpoint {
+			remote-endpoint = <&con_usbotg_hs_ep>;
+		};
+	};
+};
+
+&pinctrl {
+	board_tca6408_pins: stusb1600-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, GPIO)>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi
new file mode 100644
index 000000000000..7d3a6a3b5d09
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2021 Rouven Czerwinski, Pengutronix
+ * Copyright (C) 2023, 2024 Leonard Göhrs, Pengutronix
+ */
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-osd32.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		can0 = &m_can1;
+		ethernet0 = &ethernet0;
+		i2c0 = &i2c1;
+		i2c1 = &i2c4;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		spi0 = &spi4;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&v3v3>;
+
+		brightness-levels = <0 31 63 95 127 159 191 223 255>;
+		default-brightness-level = <7>;
+		pwms = <&led_pwm 3 1000000 0>;
+	};
+
+	led-controller-cpu {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led_controller_io: led-controller-io {
+		compatible = "gpio-leds";
+
+		/*
+		 * led-0 and led-1 are internally connected antiparallel to one
+		 * another inside the ethernet jack like this:
+		 * GPIO0 ---+---|led-0|>--+--- GPIO2
+		 *          +--<|led-1|---+
+		 * E.g. only one of the LEDs can be illuminated at a time while
+		 * the other output must be driven low.
+		 * This should likely be implemented using a multi color LED
+		 * driver for antiparallel LEDs.
+		 */
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&io_board_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&io_board_gpio 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_1v2: regulator-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v>;
+	};
+};
+
+baseboard_eeprom: &sip_eeprom {
+};
+
+&crc1 {
+	status = "okay";
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>;
+	assigned-clock-parents = <&rcc PLL4_P>;
+	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF */
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ethernet0_rgmii_pins_b>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_b>;
+
+	st,eth-clk-sel;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 { /* KSZ9031RN */
+			reg = <3>;
+			reset-gpios = <&gpioe 11 GPIO_ACTIVE_LOW>; /* ETH_RST# */
+			interrupt-parent = <&gpioa>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+			micrel,force-master;
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "ETH_INT", "", "", "",			/*  5 */
+			  "", "", "", "BOOTROM_LED", "",		/* 10 */
+			  "";						/* 15 */
+};
+
+&gpiob {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioc {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "";					/* 10 */
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "LCD_TE", "", "",			/*  5 */
+			  "LCD_DC", "", "", "", "",			/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioe {
+	gpio-line-names = "LCD_CS", "", "", "", "",			/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpiof {
+	gpio-line-names = "GPIO1", "GPIO2", "", "", "",			/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpiog {
+	gpio-line-names = "", "", "", "", "",				/*  0 */
+			  "", "", "", "", "",				/*  5 */
+			  "", "", "", "", "",				/* 10 */
+			  "";						/* 15 */
+};
+
+&gpioz {
+	gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "",	/*  0 */
+			  "", "HWID4", "HWID5";				/*  5 */
+};
+
+&hash1 {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <8>;
+	status = "okay";
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_b>;
+	pinctrl-1 = <&m_can1_sleep_pins_b>;
+	status = "okay";
+	termination-gpios = <&io_board_gpio 7 GPIO_ACTIVE_HIGH>;
+	termination-ohms = <120>;
+};
+
+&pmic {
+	regulators {
+		buck1-supply = <&reg_5v>;	/* VIN */
+		buck2-supply = <&reg_5v>;	/* VIN */
+		buck3-supply = <&reg_5v>;	/* VIN */
+		buck4-supply = <&reg_5v>;	/* VIN */
+		ldo2-supply = <&reg_5v>;	/* PMIC_LDO25IN */
+		ldo4-supply = <&reg_5v>;	/* VIN */
+		ldo5-supply = <&reg_5v>;	/* PMIC_LDO25IN */
+		vref_ddr-supply = <&reg_5v>;	/* VIN */
+		boost-supply = <&reg_5v>;	/* PMIC_BSTIN */
+		pwr_sw2-supply = <&bst_out>;	/* PMIC_SWIN */
+	};
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;
+	vmmc-supply = <&v3v3>;
+
+	bus-width = <8>;
+	mmc-ddr-3_3v;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+
+	status = "okay";
+};
+
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins_a>;
+	cs-gpios = <&gpioe 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	lcd: display@0 {
+		compatible = "shineworld,lh133k", "panel-mipi-dbi-spi";
+		reg = <0>;
+		power-supply = <&v3v3>;
+		io-supply = <&v3v3>;
+		backlight = <&backlight>;
+		dc-gpios = <&gpiod 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpioh 4 GPIO_ACTIVE_HIGH>;
+		spi-3wire;
+		spi-max-frequency = <32000000>;
+
+		width-mm = <23>;
+		height-mm = <23>;
+		rotation = <180>;
+
+		panel-timing {
+			hactive = <240>;
+			vactive = <240>;
+			hback-porch = <0>;
+			vback-porch = <0>;
+
+			clock-frequency = <0>;
+			hfront-porch = <0>;
+			hsync-len = <0>;
+			vfront-porch = <0>;
+			vsync-len = <0>;
+		};
+	};
+};
+
+&timers2 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers8 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	led_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm8_pins_b>;
+		pinctrl-1 = <&pwm8_sleep_pins_b>;
+		status = "okay";
+	};
+};
+
+&uart4 {
+	label = "debug";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+};
+
+&usart3 {
+	label = "external";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_a>;
+
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+
+	status = "okay";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
+
+&v3v3_hdmi {
+	regulator-enable-ramp-delay = <1000>;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts b/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts
new file mode 100644
index 000000000000..a40b0eae8da3
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2021 Rouven Czerwinski, Pengutronix
+ * Copyright (C) 2023, 2024 Leonard Göhrs, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc-lxa-tac.dtsi"
+
+/ {
+	model = "Linux Automation Test Automation Controller (TAC) Gen 3";
+	compatible = "lxa,stm32mp153c-tac-gen3", "oct,stm32mp153x-osd32", "st,stm32mp153";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&v3v3>;
+
+		brightness-levels = <0 31 63 95 127 159 191 223 255>;
+		default-brightness-level = <7>;
+		pwms = <&led_pwm 3 1000000 0>;
+	};
+
+	reg_iobus_12v: regulator-iobus-12v {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12v>;
+		gpio = <&gpioh 13 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "12V_IOBUS";
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <65535>;
+
+			led-red {
+				active-low;
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&led_pwm 0 1000000 0>;
+			};
+
+			led-green {
+				active-low;
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&led_pwm 2 1000000 0>;
+			};
+
+			led-blue {
+				active-low;
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&led_pwm 1 1000000 0>;
+			};
+		};
+	};
+
+	led-controller-2 {
+		compatible = "gpio-leds";
+
+		led-5 {
+			label = "tac:green:iobus";
+			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			label = "tac:green:can";
+			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-7 {
+			label = "tac:green:out0";
+			gpios = <&gpiob 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			label = "tac:green:out1";
+			gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-9 {
+			label = "tac:green:uarttx";
+			gpios = <&gpiod 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-10 {
+			label = "tac:green:uartrx";
+			gpios = <&gpiof 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-11 {
+			label = "tac:green:usbh1";
+			gpios = <&gpioc 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-12 {
+			label = "tac:green:usbh2";
+			gpios = <&gpiod 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-13 {
+			label = "tac:green:usbh3";
+			gpios = <&gpiob 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-14 {
+			label = "tac:green:usbg";
+			gpios = <&gpiod 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-gadget";
+		};
+
+		led-15 {
+			label = "tac:green:dutpwr";
+			gpios = <&gpioa 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&board_adc1_ain_pins>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <2 5 9 10 13 14 15 18>;
+		st,min-sample-time-nsecs = <5000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@2 {
+			reg = <2>;
+			label = "OUT_0_FB";
+		};
+
+		channel@5 {
+			reg = <5>;
+			label = "IOBUS_CURR_FB";
+		};
+
+		channel@9 {
+			reg = <9>;
+			label = "IOBUS_VOLT_FB";
+		};
+
+		channel@10 {
+			reg = <10>;
+			label = "OUT_1_FB";
+		};
+
+		channel@13 {
+			reg = <13>;
+			label = "HOST_CURR_FB";
+		};
+
+		channel@14 {
+			reg = <14>;
+			label = "HOST_3_CURR_FB";
+		};
+
+		channel@15 {
+			reg = <15>;
+			label = "HOST_1_CURR_FB";
+		};
+
+		channel@18 {
+			reg = <18>;
+			label = "HOST_2_CURR_FB";
+		};
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <12>;
+		st,min-sample-time-nsecs = <500000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@12 {
+			reg = <12>;
+			label = "TEMP_INTERNAL";
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names = "", "", "", "", "",              /*  0 */
+	"ETH_GPIO1", "ETH_INT", "", "", "",                /*  5 */
+	"", "", "", "BOOTROM_LED", "ETH_LAB_LEDRP",        /* 10 */
+	"";                                                /* 15 */
+};
+
+&gpioc {
+	gpio-line-names = "", "DUT_PWR_DISCH", "", "", "", /*  0 */
+	"", "", "", "", "",                                /*  5 */
+	"", "";                                            /* 10 */
+};
+
+&gpioe {
+	gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /*  0 */
+	"", "", "USER_BTN2", "DUT_PWR_EN", "UART_TX_EN",    /*  5 */
+	"UART_RX_EN", "TP24", "", "TP25", "TP26",           /* 10 */
+	"TP27";                                             /* 15 */
+};
+
+&gpiog {
+	gpio-line-names = "ETH_RESET", "", "", "", "",               /*  0 */
+	"IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /*  5 */
+	"POWER_ADC_RESET", "", "", "", "",                           /* 10 */
+	"";                                                          /* 15 */
+};
+
+&m_can2 {
+	termination-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>;
+	termination-ohms = <120>;
+};
+
+&pinctrl {
+	board_adc1_ain_pins: board-adc1-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */
+				 <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1_INP13 */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ADC1_INP14 */
+				 <STM32_PINMUX('A', 3, ANALOG)>, /* ADC1_INP15 */
+				 <STM32_PINMUX('A', 4, ANALOG)>; /* ADC1_INP18 */
+		};
+	};
+};
+
+&spi2 {
+	adc@0 {
+		compatible = "ti,lmp92064";
+		reg = <0>;
+
+		reset-gpios = <&gpiog 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		shunt-resistor-micro-ohms = <15000>;
+		spi-max-frequency = <5000000>;
+		vdd-supply = <&reg_pb_3v3>;
+		vdig-supply = <&reg_pb_3v3>;
+	};
+};
+
+&timers8 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	status = "okay";
+
+	led_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm8_pins_b>;
+		pinctrl-1 = <&pwm8_sleep_pins_b>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/st/stm32mp157a-iot-box.dts
index 6a5a4af25bd9..84497026a106 100644
--- a/arch/arm/boot/dts/st/stm32mp157a-iot-box.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-iot-box.dts
@@ -46,7 +46,7 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 5f9c0160a9c4..1ec3b8f2faa9 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -45,7 +45,6 @@
 		reg = <0>;
 		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
 		power-supply = <&v3v3>;
-		status = "okay";
 
 		port {
 			panel_in: endpoint {
@@ -63,15 +62,20 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&hdp {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdp2_gpo &hdp2_pins_a>;
+	pinctrl-1 = <&hdp2_sleep_pins_a>;
+};
+
 &i2c1 {
 	touchscreen@38 {
 		compatible = "focaltech,ft6236";
 		reg = <0x38>;
-		interrupts = <2 2>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-parent = <&gpiof>;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
-		status = "okay";
 	};
 };
 
@@ -115,7 +119,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
index 9cf5ed111b52..f6c478dbd041 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
@@ -328,6 +328,8 @@
 			<&vdev0vring1>, <&vdev0buffer>;
 	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
 	mbox-names = "vq0", "vq1", "shutdown", "detach";
+	pinctrl-names = "default";
+	pinctrl-0 = <&m4_leds_orange_pins_b>;
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
index 9eb9a1bf4f2c..8f99c30f1af1 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
@@ -306,6 +306,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm2_pins_a>;
 		pinctrl-1 = <&pwm2_sleep_pins_a>;
@@ -321,6 +324,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm8_pins_a>;
 		pinctrl-1 = <&pwm8_sleep_pins_a>;
@@ -336,6 +342,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm12_pins_a>;
 		pinctrl-1 = <&pwm12_sleep_pins_a>;
diff --git a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts
index 81f254fb88b0..e72e42eb0eb4 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts
@@ -35,6 +35,76 @@
 	};
 };
 
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_ain_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 2 5 9 10 13 15>;
+		st,min-sample-time-nsecs = <5000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@0 {
+			reg = <0>;
+			label = "HOST_2_CURR_FB";
+		};
+
+		channel@1 {
+			reg = <1>;
+			label = "HOST_3_CURR_FB";
+		};
+
+		channel@2 {
+			reg = <2>;
+			label = "OUT_0_FB";
+		};
+
+		channel@5 {
+			reg = <5>;
+			label = "IOBUS_CURR_FB";
+		};
+
+		channel@9 {
+			reg = <9>;
+			label = "IOBUS_VOLT_FB";
+		};
+
+		channel@10 {
+			reg = <10>;
+			label = "OUT_1_FB";
+		};
+
+		channel@13 {
+			reg = <13>;
+			label = "HOST_CURR_FB";
+		};
+
+		channel@15 {
+			reg = <15>;
+			label = "HOST_1_CURR_FB";
+		};
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <12>;
+		st,min-sample-time-nsecs = <500000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@12 {
+			reg = <12>;
+			label = "TEMP_INTERNAL";
+		};
+	};
+};
+
 &gpioa {
 	gpio-line-names = "", "", "STACK_CS2", "", "STACK_CS3", /*  0 */
 	"ETH_GPIO1", "ETH_INT", "", "", "",                     /*  5 */
@@ -48,6 +118,20 @@
 	"", "";                                        /* 10 */
 };
 
+&gpioe {
+	gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /*  0 */
+	"", "", "USER_BTN2", "TP48", "UART_TX_EN",          /*  5 */
+	"UART_RX_EN", "TP24", "", "TP25", "TP26",           /* 10 */
+	"TP27";                                             /* 15 */
+};
+
+&gpiog {
+	gpio-line-names = "ETH_RESET", "", "", "", "",               /*  0 */
+	"IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /*  5 */
+	"TP49", "", "", "", "",                                      /* 10 */
+	"";                                                          /* 15 */
+};
+
 &gpu {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
index 4cc177031661..2ae281725a48 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
@@ -121,6 +121,76 @@
 	};
 };
 
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_ain_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 2 5 9 10 13 15>;
+		st,min-sample-time-nsecs = <5000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@0 {
+			reg = <0>;
+			label = "HOST_2_CURR_FB";
+		};
+
+		channel@1 {
+			reg = <1>;
+			label = "HOST_3_CURR_FB";
+		};
+
+		channel@2 {
+			reg = <2>;
+			label = "OUT_0_FB";
+		};
+
+		channel@5 {
+			reg = <5>;
+			label = "IOBUS_CURR_FB";
+		};
+
+		channel@9 {
+			reg = <9>;
+			label = "IOBUS_VOLT_FB";
+		};
+
+		channel@10 {
+			reg = <10>;
+			label = "OUT_1_FB";
+		};
+
+		channel@13 {
+			reg = <13>;
+			label = "HOST_CURR_FB";
+		};
+
+		channel@15 {
+			reg = <15>;
+			label = "HOST_1_CURR_FB";
+		};
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <12>;
+		st,min-sample-time-nsecs = <500000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		channel@12 {
+			reg = <12>;
+			label = "TEMP_INTERNAL";
+		};
+	};
+};
+
 &gpioa {
 	gpio-line-names = "", "", "DUT_PWR_EN", "", "STACK_CS3", /*  0 */
 	"ETH_GPIO1", "ETH_INT", "", "", "",                      /*  5 */
@@ -134,6 +204,20 @@
 	"", "";                                            /* 10 */
 };
 
+&gpioe {
+	gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /*  0 */
+	"", "", "USER_BTN2", "TP48", "UART_TX_EN",          /*  5 */
+	"UART_RX_EN", "TP24", "", "TP25", "TP26",           /* 10 */
+	"TP27";                                             /* 15 */
+};
+
+&gpiog {
+	gpio-line-names = "ETH_RESET", "", "", "", "",               /*  0 */
+	"IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /*  5 */
+	"TP49", "", "", "", "",                                      /* 10 */
+	"";                                                          /* 15 */
+};
+
 &gpu {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
index bf0c32027baf..370b2afbf15b 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi
@@ -185,13 +185,13 @@
 		interrupt-parent = <&gpioi>;
 		vio-supply = <&v3v3>;
 		vcc-supply = <&v3v3>;
+		st,sample-time = <4>;
+		st,mod-12b = <1>;
+		st,ref-sel = <0>;
+		st,adc-freq = <1>;
 
 		touchscreen {
 			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
 			st,ave-ctrl = <1>;
 			st,touch-det-delay = <2>;
 			st,settling = <2>;
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
new file mode 100644
index 000000000000..2531f4bc8ca4
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
@@ -0,0 +1,1152 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Ultratronik GmbH 2024-2025 - All Rights Reserved
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STM STM32MP15x Ultratronik MMI_A7 board";
+	compatible = "ultratronik,stm32mp157c-ultra-fly-sbc", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &uart5;
+		serial2 = &uart7;
+		serial3 = &usart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x40000000>;
+	};
+
+	usb_otg_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpioh 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x2000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x2000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10044000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10044000 0x4000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@f8000000 {
+			reg = <0xf8000000 0x8000000>;
+			no-map;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "buzzer";
+			gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "none";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&gpioa 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			label = "KEY1";
+			gpios = <&gpiod 1 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+			linux,code = <2>;
+		};
+
+		key-2 {
+			label = "KEY2";
+			gpios = <&gpiod 7 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+			linux,code = <3>;
+		};
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_ux_ain_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,min-sample-time-nsecs = <5000>;
+		st,adc-channels = <0 1 6 13>; /* ANA0 ANA1 PF12 PC3 */
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 12>; /* ANA0 ANA1 INT_TEMP*/
+		st,min-sample-time-nsecs = <10000>;
+		status = "okay";
+
+		channel@12 {
+			reg = <12>;  /* Channel 12 = internal temperature sensor */
+			label = "internal_temp";
+		};
+	};
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ux_ch1_pins_a &dac_ux_ch2_pins_a>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	dac1: dac@1 {
+		status = "okay";
+	};
+
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	compatible = "st,stm32-thermal";
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_ux_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_ux_rgmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names =
+	"#PMIC_IRQ", "", "", "", "DAC1", "DAC2", "", "",
+	"", "", "OTG_ID", "TIM1_4", "#LED1", "#LED2", "#LED3", "";
+};
+
+&gpiob {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpioc {
+	gpio-line-names =
+	"#AMP_SD", "", "", "ANA5", "", "", "", "",
+	"", "", "", "", "", "PMIC_WAKEUP", "", "";
+};
+
+&gpiod {
+	gpio-line-names =
+	"#G_INT", "#TASTER1", "", "", "GPIO1", "GPIO2", "", "#TASTER2",
+	"", "", "", "", "", "", "TIM4_3", "TIM4_4";
+};
+
+&gpioe {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "PWM2", "", "", "", "", "";
+};
+
+&gpiof {
+	gpio-line-names =
+	"#SD1_CD", "SD1_WP", "BUZZER", "#DISP_POW", "BKL_POW", "#CAM_RES", "", "",
+	"", "TIM17_1N", "", "CAM_PWDN", "ANA6", "ENA_USB", "", "";
+};
+
+&gpiog {
+	gpio-line-names =
+	"#ESP_RES", "#ESP_BOOT", "GPIO3", "GPIO4", "", "", "", "",
+	"", "#TOUCH_IRQ", "", "", "", "", "", "#PCAP_RES";
+};
+
+&gpioh {
+	gpio-line-names =
+	"", "CAM_LED", "", "USB_OTG_PWR", "", "USB_OTG_OC", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpioi {
+	gpio-line-names =
+	"BKL_PWM", "", "", "", "", "", "", "",
+	"#SPI_CS0", "", "", "#SPI_CS1", "", "", "", "";
+};
+
+&gpioj {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpiok {
+	gpio-line-names =
+	"", "", "", "", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpioz {
+	gpio-line-names =
+	"", "", "", "#SPI_CS2", "", "", "", "",
+	"", "", "", "", "", "", "", "";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_ux_pins_a>;
+	pinctrl-1 = <&i2c1_ux_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+		epson,vdet-disable;
+		trickle-diode-disable;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_ux_pins_a>;
+	pinctrl-1 = <&i2c4_ux_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: pmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&exti 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1600000>;/* offset +200 mv ??? */
+				regulator-max-microvolt = <1600000>;/* real 1800000 */
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge = <1>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m_can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_ux_pins_a>;
+	pinctrl-1 = <&m_can2_ux_sleep_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+
+	adc1_ux_ain_pins_a: adc1-ux-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F',12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('C', 3, ANALOG)>; /* ADC2 in13 */
+		};
+	};
+
+	dac_ux_ch1_pins_a: dac-ux-ch1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+		};
+	};
+
+	dac_ux_ch2_pins_a: dac-ux-ch2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+		};
+	};
+
+	ethernet0_ux_rgmii_pins_a: rgmii-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>; /* ETH_RGMII_TX_CTL */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	ethernet0_ux_rgmii_pins_sleep_a: rgmii-ux-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	i2c1_ux_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_ux_pins_sleep_a: i2c1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	m_can2_ux_pins_a: m-can2-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN1_TX */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can2_ux_sleep_pins_a: m-can2-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('B', 5, ANALOG)>; /* CAN1_RX */
+		};
+	};
+	pwm1_ux_pins_a: pwm1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A',11, AF1)>, /* TIM1_CH4 */
+				 <STM32_PINMUX('E',10, AF1)>; /* TIM1_CH2N */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_ux_sleep_pins_a: pwm1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A',11, ANALOG)>, /* TIM1_CH4 */
+				 <STM32_PINMUX('E',10, ANALOG)>; /* TIM1_CH2N */
+		};
+	};
+
+	pwm4_ux_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+			bias-disable;
+		};
+	};
+
+	pwm4_ux_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+		};
+	};
+
+	pwm5_ux_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_ux_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */
+		};
+	};
+
+	pwm17_ux_pins_a: pwm17-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 9, AF1)>; /* TIM17_CH1N */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm17_ux_sleep_pins_a: pwm17-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 9, ANALOG)>; /* TIM17_CH1N */
+		};
+	};
+
+	qspi_bk1_ux_pins_a: qspi-bk1-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('D',12, AF9)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B',10, AF9)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk1_ux_sleep_pins_a: qspi-bk1-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('D',12, ANALOG)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+				 <STM32_PINMUX('B',10, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_clk_ux_pins_a: qspi-clk_ux-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 7, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	qspi_clk_ux_sleep_pins_a: qspi-clk-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 7, ANALOG)>; /* QSPI_CLK */
+		};
+	};
+
+	sai2a_ux_pins_a: sai2a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D',11, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_ux_sleep_pins_a: sai2a-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D',11, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+		};
+	};
+
+	sdmmc1_ux_b4_pins_a: sdmmc1-ux-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C',10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C',11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_ux_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_ux_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc2_ux_b4_pins_a: sdmmc2-ux-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				<STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				<STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_ux_b4_od_pins_a: sdmmc2-ux-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				<STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_ux_b4_sleep_pins_a: sdmmc2-ux-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				<STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				<STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				<STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				<STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				<STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	sdmmc2_ux_d47_pins_a: sdmmc2-ux-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				<STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				<STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_ux_d47_sleep_pins_a: sdmmc2-ux-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				<STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				<STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				<STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	uart4_ux_pins_a: uart4-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_ux_idle_pins_a: uart4-ux-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+		};
+
+	uart4_ux_sleep_pins_a: uart4-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	uart5_ux_pins_a: uart5-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF14)>; /* UART5_RX */
+			bias-disable;
+		};
+	};
+
+	uart5_ux_idle_pins_a: uart5-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, ANALOG)>; /* UART5_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF14)>; /* UART5_RX*/
+			bias-disable;
+		};
+	};
+
+	uart5_ux_sleep_pins_a: uart5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 13, ANALOG)>, /* UART5_TX */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* UART5_RX */
+		};
+	};
+
+	uart7_ux_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* USART7_TX */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('E', 9, AF7)>; /* USART7_RTS/DE */
+		};
+	};
+
+	uart7_ux_idle_pins_a: uart7-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* USART7_TX */
+				 <STM32_PINMUX('E', 9, AF7)>; /* USART7_RTS/DE */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* USART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_ux_sleep_pins_a: uart7-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* USART7_TX */
+				 <STM32_PINMUX('E', 9, AF7)>, /* USART7_RTS/DE */
+				 <STM32_PINMUX('E', 7, ANALOG)>; /* USART7_RX */
+		};
+	};
+};
+
+&pinctrl_z {
+
+	i2c4_ux_pins_a: i2c4-ux-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+				<STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c4_ux_pins_sleep_a: i2c4-1 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+				<STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+		};
+	};
+
+	spi1_ux_pins_a: spi1-ux-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+				<STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	spi1_ux_sleep_pins_a: spi1-ux-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>, /* SPI1_SCK */
+				<STM32_PINMUX('Z', 1, ANALOG)>, /* SPI1_MISO */
+				<STM32_PINMUX('Z', 2, ANALOG)>; /* SPI1_MOSI */
+		};
+	};
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_ux_pins_a &qspi_bk1_ux_pins_a>;
+	pinctrl-1 = <&qspi_clk_ux_sleep_pins_a &qspi_bk1_ux_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x1000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <133000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_ux_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_ux_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_ux_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_ux_b4_pins_a &sdmmc2_ux_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_ux_b4_od_pins_a &sdmmc2_ux_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_ux_b4_sleep_pins_a &sdmmc2_ux_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_ux_pins_a>;
+	pinctrl-1 = <&spi1_ux_sleep_pins_a>;
+	status = "okay";
+	cs-gpios = <&gpioi 8 0>, <&gpioi 11 0>, <&gpioz 3 0>;
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm1_ux_pins_a>;
+		pinctrl-1 = <&pwm1_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	dmas = <&dmamux1 31 0x400 0x5>;
+	dma-names = "ch3";
+	status = "okay";
+
+	pwm4_4: pwm {
+		pinctrl-0 = <&pwm4_ux_pins_a>;
+		pinctrl-1 = <&pwm4_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm5_4: pwm {
+		pinctrl-0 = <&pwm5_ux_pins_a>;
+		pinctrl-1 = <&pwm5_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers17 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm17_4: pwm {
+		pinctrl-0 = <&pwm17_ux_pins_a>;
+		pinctrl-1 = <&pwm17_ux_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+
+	timer@16 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pinctrl-names = "default", "sleep", "idle", "no_console_suspend";
+	pinctrl-0 = <&uart4_ux_pins_a>;
+	pinctrl-1 = <&uart4_ux_sleep_pins_a>;
+	pinctrl-2 = <&uart4_ux_idle_pins_a>;
+	pinctrl-3 = <&uart4_ux_pins_a>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart5_ux_pins_a>;
+	pinctrl-1 = <&uart5_ux_sleep_pins_a>;
+	pinctrl-2 = <&uart5_ux_idle_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_ux_pins_a>;
+	pinctrl-1 = <&uart7_ux_sleep_pins_a>;
+	pinctrl-2 = <&uart7_ux_idle_pins_a>;
+	status = "okay";
+};
+
+&usart1 {
+	/*Muxing happens in uboot*/
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	vbus-supply = <&usb_otg_vbus>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi b/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi
new file mode 100644
index 000000000000..89de85a2eff3
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	reserved-memory {
+		optee@de000000 {
+			reg = <0xde000000 0x2000000>;
+			no-map;
+		};
+	};
+
+	arm_wdt: watchdog {
+		compatible = "arm,smc-wdt";
+		arm,smc-id = <0xbc000000>;
+		status = "disabled";
+	};
+
+};
+
+&adc {
+	vdd-supply = <&scmi_vdd>;
+	vdda-supply = <&scmi_vdd>;
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&cs42l51 {
+	VL-supply = <&scmi_v3v3>;
+	VD-supply = <&scmi_v1v8_audio>;
+	VA-supply = <&scmi_v1v8_audio>;
+	VAHP-supply = <&scmi_v1v8_audio>;
+};
+
+&dsi {
+	phy-dsi-supply = <&scmi_reg18>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c1 {
+	hdmi-transmitter@39 {
+		iovcc-supply = <&scmi_v3v3_hdmi>;
+		cvcc12-supply = <&scmi_v1v2_hdmi>;
+	};
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+	status = "disabled";
+};
+
+&m4_rproc {
+	/delete-property/ st,syscfg-holdboot;
+	resets = <&scmi_reset RST_SCMI_MCU>,
+		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+	reset-names = "mcu_rst", "hold_boot";
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
+&pwr_regulators {
+	vdd-supply = <&scmi_vdd>;
+	vdd_3v3_usbfs-supply = <&scmi_vdd_usb>;
+	status = "disabled";
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
+
+&scmi_reguls {
+	scmi_vddcore: regulator@3 {
+		reg = <VOLTD_SCMI_STPMIC1_BUCK1>;
+		regulator-name = "vddcore";
+	};
+
+	scmi_vdd: regulator@5 {
+		reg = <VOLTD_SCMI_STPMIC1_BUCK3>;
+		regulator-name = "vdd";
+	};
+
+	scmi_v3v3: regulator@6 {
+		reg = <VOLTD_SCMI_STPMIC1_BUCK4>;
+		regulator-name = "v3v3";
+	};
+
+	scmi_v1v8_audio: regulator@7 {
+		reg = <VOLTD_SCMI_STPMIC1_LDO1>;
+		regulator-name = "v1v8_audio";
+	};
+
+	scmi_v3v3_hdmi: regulator@8 {
+		reg = <VOLTD_SCMI_STPMIC1_LDO2>;
+		regulator-name = "v3v3_hdmi";
+	};
+
+	scmi_vdd_usb: regulator@a {
+		reg = <VOLTD_SCMI_STPMIC1_LDO4>;
+		regulator-name = "vdd_usb";
+	};
+
+	scmi_vdda: regulator@b {
+		reg = <VOLTD_SCMI_STPMIC1_LDO5>;
+		regulator-name = "vdda";
+	};
+
+	scmi_v1v2_hdmi: regulator@c {
+		reg = <VOLTD_SCMI_STPMIC1_LDO6>;
+		regulator-name = "v1v2_hdmi";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	scmi_vbus_otg: regulator@f {
+		reg = <VOLTD_SCMI_STPMIC1_PWR_SW1>;
+		regulator-name = "vbus_otg";
+	 };
+
+	 scmi_vbus_sw: regulator@10 {
+		reg = <VOLTD_SCMI_STPMIC1_PWR_SW2>;
+		regulator-name = "vbus_sw";
+	 };
+};
+
+&sdmmc1 {
+	vmmc-supply = <&scmi_v3v3>;
+};
+
+&sdmmc3 {
+	vmmc-supply = <&scmi_v3v3>;
+};
+
+&usbh_ehci {
+	hub@1 {
+		vdd-supply = <&scmi_v3v3>;
+	};
+};
+
+&usbphyc_port0 {
+	phy-supply = <&scmi_vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&scmi_vdd_usb>;
+};
+
+&vrefbuf {
+	vdda-supply = <&scmi_vdd>;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
new file mode 100644
index 000000000000..8fa61e54d026
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xf.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+#include "stm32mp157f-dk2-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157F-DK2 Discovery Board";
+	compatible = "st,stm32mp157f-dk2", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&arm_wdt {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+		power-supply = <&scmi_v3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_in {
+	remote-endpoint = <&ltdc_ep1_out>;
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&i2c1 {
+	touchscreen@38 {
+		compatible = "focaltech,ft6236";
+		reg = <0x38>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiof>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+	};
+};
+
+/* I2C4 is managed by OP-TEE */
+&i2c4 {
+	status = "disabled";
+
+	/* i2c4 subnodes, which won't be managed by Linux */
+	typec@28 {
+		status = "disabled";
+		connector {
+			status = "disabled";
+		};
+	};
+
+	stpmic@33 {
+		status = "disabled";
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep1_out: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&rtc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_rsvd_pins_a>;
+
+	rtc_lsco_pins_a: rtc-lsco-0 {
+		pins = "out2_rmp";
+		function = "lsco";
+	};
+};
+
+/* Wifi */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	non-removable;
+	cap-sdio-irq;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&scmi_v3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_lsco_pins_a>;
+	};
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_c>;
+	pinctrl-1 = <&usart2_sleep_pins_c>;
+	pinctrl-2 = <&usart2_idle_pins_c>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		vbat-supply = <&scmi_v3v3>;
+		vddio-supply = <&scmi_v3v3>;
+	};
+};
+
+/* Since I2C4 is disabled, STUSB1600 is also disabled so there is no Type-C support */
+&usbotg_hs {
+	dr_mode = "peripheral";
+	role-switch-default-mode = "peripheral";
+	/*
+	 * Forcing dr_mode = "peripheral"/"role-switch-default-mode = "peripheral";
+	 * will cause the pull-up on D+/D- to be raised as soon as the OTG is configured at runtime,
+	 * regardless of the presence of VBUS. Notice that on self-powered devices like
+	 * stm32mp157f-dk2, this isn't compliant with the USB standard. That's why usbotg_hs is kept
+	 * disabled here.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
index c87fd96cbd91..ab13f0c39892 100644
--- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
@@ -16,12 +16,20 @@
 
 / {
 	aliases {
+		can0 = &m_can1;
+		can1 = &m_can2;
 		ethernet0 = &ethernet0;
 		ethernet1 = &port_uplink;
 		ethernet2 = &port_dut;
+		i2c0 = &i2c1;
+		i2c1 = &i2c4;
+		i2c2 = &i2c5;
 		mmc1 = &sdmmc2;
 		serial0 = &uart4;
 		serial1 = &usart3;
+		spi0 = &spi2;
+		spi1 = &spi4;
+		spi2 = &spi5;
 	};
 
 	chosen {
@@ -142,76 +150,6 @@
 baseboard_eeprom: &sip_eeprom {
 };
 
-&adc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&adc1_ain_pins_a>;
-	vdd-supply = <&vdd>;
-	vdda-supply = <&vdda>;
-	vref-supply = <&vrefbuf>;
-	status = "okay";
-
-	adc1: adc@0 {
-		st,adc-channels = <0 1 2 5 9 10 13 15>;
-		st,min-sample-time-nsecs = <5000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		channel@0 {
-			reg = <0>;
-			label = "HOST_2_CURR_FB";
-		};
-
-		channel@1 {
-			reg = <1>;
-			label = "HOST_3_CURR_FB";
-		};
-
-		channel@2 {
-			reg = <2>;
-			label = "OUT_0_FB";
-		};
-
-		channel@5 {
-			reg = <5>;
-			label = "IOBUS_CURR_FB";
-		};
-
-		channel@9 {
-			reg = <9>;
-			label = "IOBUS_VOLT_FB";
-		};
-
-		channel@10 {
-			reg = <10>;
-			label = "OUT_1_FB";
-		};
-
-		channel@13 {
-			reg = <13>;
-			label = "HOST_CURR_FB";
-		};
-
-		channel@15 {
-			reg = <15>;
-			label = "HOST_1_CURR_FB";
-		};
-	};
-
-	adc2: adc@100 {
-		st,adc-channels = <12>;
-		st,min-sample-time-nsecs = <500000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		channel@12 {
-			reg = <12>;
-			label = "TEMP_INTERNAL";
-		};
-	};
-};
-
 &crc1 {
 	status = "okay";
 };
@@ -265,13 +203,6 @@ baseboard_eeprom: &sip_eeprom {
 	"ETH_LAB_LEDRN";                          /* 15 */
 };
 
-&gpioe {
-	gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /*  0 */
-	"", "", "USER_BTN2", "TP48", "UART_TX_EN",          /*  5 */
-	"UART_RX_EN", "TP24", "", "TP25", "TP26",           /* 10 */
-	"TP27";                                             /* 15 */
-};
-
 &gpiof {
 	gpio-line-names = "TP36", "TP37", "", "", "OLED_CS", /*  0 */
 	"", "", "", "", "",                                  /*  5 */
@@ -279,13 +210,6 @@ baseboard_eeprom: &sip_eeprom {
 	"";                                                  /* 15 */
 };
 
-&gpiog {
-	gpio-line-names = "ETH_RESET", "", "", "", "",               /*  0 */
-	"IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /*  5 */
-	"TP49", "", "", "", "",                                      /* 10 */
-	"";                                                          /* 15 */
-};
-
 &gpioh {
 	gpio-line-names = "", "", "OUT_1", "OUT_0", "OLED_RESET", /*  0 */
 	"", "", "", "", "",                                       /*  5 */
@@ -338,7 +262,7 @@ baseboard_eeprom: &sip_eeprom {
 	status = "okay";
 
 	usbhub: usbhub@2c {
-		compatible ="microchip,usb2514b";
+		compatible = "microchip,usb2514b";
 		reg = <0x2c>;
 		vdd-supply = <&v3v3>;
 		reset-gpios = <&gpiob 6 GPIO_ACTIVE_LOW>;
@@ -379,10 +303,6 @@ baseboard_eeprom: &sip_eeprom {
 	};
 };
 
-&rtc {
-	status = "okay";
-};
-
 &sdmmc2 {
 	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
@@ -573,8 +493,9 @@ baseboard_eeprom: &sip_eeprom {
 	phys = <&usbphyc_port1 0>;
 	phy-names = "usb2-phy";
 
-	vusb_d-supply = <&vdd_usb>;
-	vusb_a-supply = <&reg18>;
+	g-rx-fifo-size = <512>;
+	g-np-tx-fifo-size = <32>;
+	g-tx-fifo-size = <128 128 64 16 16 16 16 16>;
 
 	dr_mode = "peripheral";
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xf.dtsi b/arch/arm/boot/dts/st/stm32mp15xf.dtsi
new file mode 100644
index 000000000000..ffa55d64bea3
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp15xf.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&etzpc {
+	cryp1: cryp@54001000 {
+		compatible = "st,stm32mp1-cryp";
+		reg = <0x54001000 0x400>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CRYP1>;
+		resets = <&rcc CRYP1_R>;
+		access-controllers = <&etzpc 9>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
index bb4f8a0b937f..52c4e69597a4 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -6,18 +6,6 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 
-/ {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
 &adc {
 	status = "disabled";
 };
@@ -74,7 +62,6 @@
 	pinctrl-0 = <&i2c2_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
 	/* spare dmas for other usage */
 	/delete-property/dmas;
 	/delete-property/dma-names;
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 171d7c7658fa..5c77202ee196 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -7,16 +7,6 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	clk_ext_audio_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -30,7 +20,6 @@
 		default-brightness-level = <8>;
 		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
 		power-supply = <&reg_panel_bl>;
-		status = "okay";
 	};
 
 	gpio-keys-polled {
@@ -145,7 +134,6 @@
 			  "MIC_IN", "Microphone Jack",
 			  "Microphone Jack", "Mic Bias";
 		dais = <&sai2a_port &sai2b_port>;
-		status = "okay";
 	};
 };
 
@@ -160,7 +148,6 @@
 	pinctrl-0 = <&i2c2_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
 	/* spare dmas for other usage */
 	/delete-property/dmas;
 	/delete-property/dma-names;
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
index b5bc53accd6b..01c693cc0344 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
@@ -7,16 +7,6 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	led {
 		compatible = "gpio-leds";
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
index 74a11ccc5333..4cc633683c6b 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
@@ -14,6 +14,13 @@
 		ethernet1 = &ksz8851;
 		rtc0 = &hwrtc;
 		rtc1 = &rtc;
+		serial0 = &uart4;
+		serial1 = &uart8;
+		serial2 = &usart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@c0000000 {
@@ -262,7 +269,6 @@
 		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		status = "okay";
 
 		regulators {
 			compatible = "st,stpmic1-regulators";
@@ -381,7 +387,6 @@
 			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
 			interrupt-names = "onkey-falling", "onkey-rising";
 			power-off-time-sec = <10>;
-			status = "okay";
 		};
 
 		watchdog {
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
index 343a4613dfca..aceeff6c38ba 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi
@@ -435,7 +435,7 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index f7634c51efb2..8cea6facd27b 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -254,7 +254,7 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 
-	stusb1600@28 {
+	stusb1600: typec@28 {
 		compatible = "st,stusb1600";
 		reg = <0x28>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
@@ -479,6 +479,8 @@
 			<&vdev0vring1>, <&vdev0buffer>;
 	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
 	mbox-names = "vq0", "vq1", "shutdown", "detach";
+	pinctrl-names = "default";
+	pinctrl-0 = <&m4_leds_orange_pins_a>;
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
@@ -515,6 +517,7 @@
 				remote-endpoint = <&cs42l51_tx_endpoint>;
 				dai-format = "i2s";
 				mclk-fs = <256>;
+				system-clock-direction-out;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <32>;
 			};
@@ -570,6 +573,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm1_pins_a>;
 		pinctrl-1 = <&pwm1_sleep_pins_a>;
@@ -585,6 +591,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm3_pins_a>;
 		pinctrl-1 = <&pwm3_sleep_pins_a>;
@@ -600,6 +609,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
 		pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
@@ -615,6 +627,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm5_pins_a>;
 		pinctrl-1 = <&pwm5_sleep_pins_a>;
@@ -630,6 +645,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	timer@5 {
 		status = "okay";
 	};
@@ -639,6 +657,9 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 	status = "disabled";
+	counter {
+		status = "okay";
+	};
 	pwm {
 		pinctrl-0 = <&pwm12_pins_a>;
 		pinctrl-1 = <&pwm12_sleep_pins_a>;
diff --git a/arch/arm/boot/dts/ti/davinci/da850-evm.dts b/arch/arm/boot/dts/ti/davinci/da850-evm.dts
index 1f5cd35f8b74..38a191fb0414 100644
--- a/arch/arm/boot/dts/ti/davinci/da850-evm.dts
+++ b/arch/arm/boot/dts/ti/davinci/da850-evm.dts
@@ -60,7 +60,7 @@
 			sync-edge = <0>;
 			sync-ctrl = <1>;
 			raster-order = <0>;
-			fifo-th = <0>;
+			fifo-th = <1>;
 		};
 
 		display-timings {
diff --git a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
index 4df10379ff22..173401c58d53 100644
--- a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
@@ -412,14 +412,14 @@
 	status = "okay";
 
 	/* Don't pull down battery voltage adc io channel */
-	batt_volt_en {
+	batt-volt-en-hog {
 		gpio-hog;
 		gpios = <6 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
 	/* Don't impede Bluetooth clock signal */
-	bt_clock_en {
+	bt-clock-en-hog {
 		gpio-hog;
 		gpios = <5 GPIO_ACTIVE_HIGH>;
 		input;
@@ -433,19 +433,19 @@
 	 * anything, but they are present in the source code from LEGO.
 	 */
 
-	bt_pic_en {
+	bt-pic-en-hog {
 		gpio-hog;
 		gpios = <51 GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
 
-	bt_pic_rst {
+	bt-pic-rst-hog {
 		gpio-hog;
 		gpios = <78 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	bt_pic_cts {
+	bt-pic-cts-hog {
 		gpio-hog;
 		gpios = <87 GPIO_ACTIVE_HIGH>;
 		input;
diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index 95c68135dd0c..14e500846875 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -93,6 +93,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-boneblue.dtb \
 	am335x-bonegreen.dtb \
 	am335x-bonegreen-wireless.dtb \
+	am335x-bonegreen-eco.dtb \
 	am335x-chiliboard.dtb \
 	am335x-cm-t335.dtb \
 	am335x-evm.dtb \
@@ -100,6 +101,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-guardian.dtb \
 	am335x-icev2.dtb \
 	am335x-lxm.dtb \
+	am335x-mba335x.dtb \
 	am335x-moxa-uc-2101.dtb \
 	am335x-moxa-uc-8100-me-t.dtb \
 	am335x-myirtech-myd.dtb \
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi
index 049fd8e1b40f..ed194469973e 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi
@@ -17,18 +17,18 @@
 
 		compatible = "gpio-leds";
 
-		led-power {
+		led_power: led-power {
 			label = "onrisc:red:power";
 			linux,default-trigger = "default-on";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
-		led-wlan {
+		led_wlan: led-wlan {
 			label = "onrisc:blue:wlan";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led-app {
+		led_app: led-app {
 			label = "onrisc:green:app";
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
index ae2e8dffbe04..afb38f023b83 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
@@ -45,6 +45,23 @@
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
+
+	mpcie_regulator: mpcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie-regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 4 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	mpcie_power_switch: mpcie-power-switch {
+		compatible = "regulator-output";
+		regulator-name = "mpcie-power-switch";
+		regulator-supplies = "vcc";
+		vout-supply = <&mpcie_regulator>;
+	};
 };
 
 &am33xx_pinmux {
@@ -269,7 +286,7 @@
 	vcc7-supply = <&vbat>;
 	vccio-supply = <&vbat>;
 
-	ti,en-ck32k-xtal = <1>;
+	ti,en-ck32k-xtal;
 
 	regulators {
 		vrtc_reg: regulator@0 {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi
index c400b7b70d0d..1d83fc116b66 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi
@@ -16,7 +16,7 @@
 	};
 
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -212,12 +212,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	tps: tps@24 {
+	tps: pmic@24 {
 		reg = <0x24>;
 	};
 
 	baseboard_eeprom: eeprom@50 {
-		compatible = "atmel,24c256";
+		compatible = "atmel,24c32";
 		reg = <0x50>;
 		vcc-supply = <&ldo4_reg>;
 
diff --git a/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts
index 16b567e3cb47..b4fdcf9c02b5 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts
@@ -35,7 +35,7 @@
 		"P9_18 [spi0_d1]",
 		"P9_17 [spi0_cs0]",
 		"[mmc0_cd]",
-		"P8_42A [ecappwm0]",
+		"P9_42A [ecappwm0]",
 		"P8_35 [lcd d12]",
 		"P8_33 [lcd d13]",
 		"P8_31 [lcd d14]",
diff --git a/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts
index f579df4c2c54..d430f0bef165 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts
@@ -13,7 +13,7 @@
 	compatible = "ti,am335x-bone-blue", "ti,am33xx";
 
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts
new file mode 100644
index 000000000000..d21118cdb6c2
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 Bootlin
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "Seeed Studio BeagleBone Green Eco";
+	compatible = "seeed,am335x-bone-green-eco", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&buck1>;
+		};
+	};
+
+	sys_5v: regulator-sys-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-always-on;
+	};
+};
+
+&usb0 {
+	interrupts-extended = <&intc 18>;
+	interrupt-names = "mc";
+};
+
+&baseboard_eeprom {
+	vcc-supply = <&v3v3>;
+};
+
+&i2c0 {
+	/delete-node/ pmic@24;
+
+	tps65214: pmic@30 {
+		compatible = "ti,tps65214";
+		reg = <0x30>;
+		buck1-supply = <&sys_5v>;
+		buck2-supply = <&sys_5v>;
+		buck3-supply = <&sys_5v>;
+		ldo1-supply = <&sys_5v>;
+		ldo2-supply = <&sys_5v>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <7>;
+		pinctrl-0 = <&pmic_irq_pins_default>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-name = "vdd_mpu";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <1298500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2: buck2 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3: buck3 {
+				regulator-name = "vdds_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "vdd_1v8_1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "vdd_1v8_2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&dp83867_0>;
+	ti,dual-emac-pvid = <1>;
+};
+
+&mac_sw {
+	pinctrl-0 = <&cpsw_b_default>;
+	pinctrl-1 = <&cpsw_b_sleep>;
+};
+
+&davinci_mdio_sw {
+	/delete-node/ ethernet-phy@0;
+
+	dp83867_0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&am33xx_pinmux {
+	cpsw_b_default: cpsw-b-default-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+		>;
+	};
+
+	cpsw_b_sleep: cpsw-b-sleep-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(AM335X_PIN_NNMI, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts b/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts
index 648e97fe1dfd..ae5bc5898497 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts
@@ -12,7 +12,7 @@
 		     "ti,am33xx";
 
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
index 06767ea164b5..ece7f7854f6a 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
@@ -483,8 +483,6 @@ status = "okay";
 
 		op-mode = <0>;          /* MCASP_IIS_MODE */
 		tdm-slots = <2>;
-		/* 16 serializers */
-		num-serializer = <16>;
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
 		>;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-evm.dts b/arch/arm/boot/dts/ti/omap/am335x-evm.dts
index 61bf8bcd4c4e..856fa1191ed2 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-evm.dts
@@ -23,7 +23,7 @@
 	};
 
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	vbat: fixedregulator0 {
@@ -388,7 +388,7 @@
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
-
+	wakeup-source;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts b/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts
index eba888dcd60e..d8baccdf8bc4 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts
@@ -30,7 +30,7 @@
 	};
 
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	vbat: fixedregulator0 {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts
index 4b070e634b28..6ce3a2d029ee 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts
@@ -14,7 +14,7 @@
 	compatible = "bosch,am335x-guardian", "ti,am33xx";
 
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 		tick-timer = &timer2;
 	};
 
diff --git a/arch/arm/boot/dts/ti/omap/am335x-icev2.dts b/arch/arm/boot/dts/ti/omap/am335x-icev2.dts
index 6f0f4fba043b..ba488bba6925 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-icev2.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-icev2.dts
@@ -22,7 +22,7 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
+		stdout-path = "serial3:115200n8";
 	};
 
 	vbat: fixedregulator0 {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-mba335x.dts b/arch/arm/boot/dts/ti/omap/am335x-mba335x.dts
new file mode 100644
index 000000000000..8c0b2a1c99b1
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-mba335x.dts
@@ -0,0 +1,633 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ * Authors: Gregor Herburger, Matthias Schiffer
+ *
+ * Based on:
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am335x-tqma335x.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa335x[L] SoM on MBa335x carrier board";
+	compatible = "tq,tqma3359-mba335x", "tq,tqma3359", "ti,am33xx";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 58 61 66 75 90 125 170 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&expander1 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_mba335x_12v>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-s5 {
+			label = "S5";
+			linux,code = <BTN_0>;
+			gpios = <&expander2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-s6 {
+			label = "S6";
+			linux,code = <BTN_1>;
+			gpios = <&expander2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		button-s7 {
+			label = "S7";
+			linux,code = <BTN_2>;
+			gpios = <&expander2 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_mba335x_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "MBa335x-V12";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tqm-tlv320aic32";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPL",
+			"Headphone Jack",	"HPR",
+			"Line Out",		"LOL",
+			"Line Out",		"LOR",
+			"IN3_L",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"Line In",		"IN1_L",
+			"Line In",		"IN1_R";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			#sound-dai-cells = <0>;
+			system-clock-direction-out;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic32x4>;
+			system-clock-frequency = <24000000>;
+			system-clock-direction-out;
+		};
+	};
+};
+
+&am33xx_pinmux {
+	codec_pins: codec-pins {
+		pinctrl-single,pins = <
+			/* xdma_event_intr0.clkout1 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3)
+		>;
+	};
+
+	cpsw_default_pins: cpsw-default-pins {
+		pinctrl-single,pins = <
+			/* Port 1 */
+			/* mii1_tx_en.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rx_dv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_tx_clk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rx_clk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+
+			/* Port 2 */
+			/* gpmc_a0.rgmii2_tctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a1.rgmii2_rctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a2.rgmii2_td3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a3.rgmii2_td2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a4.rgmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a5.rgmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a6.rgmii2_tclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a7.rgmii2_rclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* gpmc_a11.rgmii2_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2)
+		>;
+	};
+
+	cpsw_sleep_pins: cpsw-sleep-pins {
+		pinctrl-single,pins = <
+			/* Port 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+
+			/* Port 2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default_pins: davinci_mdio-default-pins {
+		pinctrl-single,pins = <
+			/* mdio.mdio_data */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			/* mdc.mdio_clk */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep_pins: davinci_mdio-sleep-pins {
+		pinctrl-single,pins = <
+			/* mdio.mdio_data */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP, MUX_MODE7)
+			/* mdc.mdio_clk */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_phy0_pins: davinci_mdio-phy0-pins {
+		pinctrl-single,pins = <
+			/* usb0_drvvbus.gpio0_18 - PHY interrupt */
+			AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_INPUT, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_phy1_pins: davinci_mdio-phy1-pins {
+		pinctrl-single,pins = <
+			/* gpmc_csn0.gpio1_29 - PHY interrupt */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT, MUX_MODE7)
+		>;
+	};
+
+	dcan0_pins: dcan0-pins {
+		pinctrl-single,pins = <
+			/* uart1_ctsn.d_can0_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* uart1_rtsn.d_can0_rx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)
+		>;
+	};
+
+	dcan1_pins: dcan1-pins {
+		pinctrl-single,pins = <
+			/* uart0_ctsn.d_can1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* uart0_rtsn.d_can1_rx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)
+		>;
+	};
+
+	ecap2_pins: ecap2-pins {
+		pinctrl-single,pins = <
+			/* mcasp0_ahclkr.ecap2_in_pwm2_out */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT, MUX_MODE4)
+		>;
+	};
+
+	expander1_pins: expander1-pins {
+		pinctrl-single,pins = <
+			/* gpmc_csn3.gpio2_0 - interrupt */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE7 )
+		>;
+	};
+
+	expander2_pins: expander2-pins {
+		pinctrl-single,pins = <
+			/* gpmc_ben1.gpio1_28 - interrupt */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinctrl-single,pins = <
+			/* uart1_rxd.i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE3)
+			/* uart1_txd.i2c1_scl */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE3)
+		>;
+	};
+
+	lcd_pins: lcd-pins {
+		pinctrl-single,pins = <
+			/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)
+			/* lcd_data0.lcd_data0 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data1.lcd_data1 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data2.lcd_data2 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data3.lcd_data3 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data4.lcd_data4 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data5.lcd_data5 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data6.lcd_data6 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data7.lcd_data7 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data8.lcd_data8 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data9.lcd_data9 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data10.lcd_data10 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data11.lcd_data11 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data12.lcd_data12 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data13.lcd_data13 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data14.lcd_data14 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_data15.lcd_data15 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_vsync.lcd_vsync */
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_hsync.lcd_hsync */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_pclk.lcd_pclk */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	mcasp0_pins: mcasp0-pins {
+		pinctrl-single,pins = <
+			/* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			/* mcasp0_aclkx.mcasp0_aclkx*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			/* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			/* mcasp0_axr1.mcasp0_axr1 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			/* mcasp0_aclkr.mcasp0_aclkr */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			/* mcasp0_fsr.mcasp0_fsr */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins: mmc1-pins {
+		pinctrl-single,pins = <
+			/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			/* mmc0_clk.mmc0_clk */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			/* mmc0_cmd.mmc0_cmd */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	polytouch_pins: polytouch-pins {
+		pinctrl-single,pins = <
+			/* gpmc_clk.gpio2_1 - touch interrupt */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	uart0_pins: uart0-pins {
+		pinctrl-single,pins = <
+			/* uart0_rxd.uart0_rxd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			/* uart0_txd.uart0_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart3_pins: uart3-pins {
+		pinctrl-single,pins = <
+			/* spi0_cs1.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1)
+			/* ecap0_in_pwm0_out.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+		>;
+	};
+
+	uart4_pins: uart4-pins {
+		pinctrl-single,pins = <
+			/* gpmc_wait0.uart4_rxd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)
+			/* gpmc_wpn.uart4_txd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)
+		>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default_pins>;
+	pinctrl-1 = <&davinci_mdio_sleep_pins>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&davinci_mdio_phy0_pins>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-ps = <1860>;
+		rxd0-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd3-skew-ps = <0>;
+		rxdv-skew-ps = <0>;
+		txc-skew-ps = <1860>;
+		txd0-skew-ps = <0>;
+		txd1-skew-ps = <0>;
+		txd2-skew-ps = <0>;
+		txd3-skew-ps = <0>;
+		txen-skew-ps = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&davinci_mdio_phy1_pins>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-ps = <1860>;
+		rxd0-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd3-skew-ps = <0>;
+		rxdv-skew-ps = <0>;
+		txc-skew-ps = <1860>;
+		txd0-skew-ps = <0>;
+		txd1-skew-ps = <0>;
+		txd2-skew-ps = <0>;
+		txd3-skew-ps = <0>;
+		txen-skew-ps = <0>;
+	};
+};
+
+&dcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_pins>;
+	status = "okay";
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+&ds1339 {
+	interrupt-parent = <&expander2>;
+	interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+};
+
+&ecap2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap2_pins>;
+};
+
+&i2c0 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&codec_pins>;
+		clocks = <&clk_24mhz>;
+		clock-names = "mclk";
+		iov-supply = <&vcc3v3>;
+		ldoin-supply = <&vcc3v3>;
+		#sound-dai-cells = <0>;
+	};
+
+	jc42_2: temperature-sensor@19 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x19>;
+	};
+
+	expander1: gpio@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&expander1_pins>;
+		vcc-supply = <&vcc3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	expander2: gpio@21 {
+		compatible = "nxp,pca9554";
+		reg = <0x21>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&expander2_pins>;
+		vcc-supply = <&vcc3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	eeprom3: eeprom@51 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		vcc-supply = <&vcc3v3>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&lcdc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+	blue-and-red-wiring = "crossed";
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default_pins>;
+	pinctrl-1 = <&cpsw_sleep_pins>;
+	status = "okay";
+};
+
+&mcasp0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	#sound-dai-cells = <0>;
+	op-mode = <0>;
+	tdm-slots = <2>;
+	/* 16 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		2 1 0 0
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&tps {
+	interrupt-parent = <&expander2>;
+	interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+};
+
+&usb1 {
+	/* Should be "otg", but role switching currently doesn't work */
+	dr_mode = "peripheral";
+};
+
+/* SOM supply */
+&vcc3v3in {
+	vin-supply = <&vcc3v3>;
+};
diff --git a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
index fd91a3c01a63..476a6bdaf43f 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
@@ -15,7 +15,7 @@
 	compatible = "myir,myd-am335x", "myir,myc-am335x", "ti,am33xx";
 
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	clk12m: clk12m {
@@ -143,7 +143,7 @@
 
 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
-		reg =<0xa>;
+		reg = <0xa>;
 		clocks = <&clk12m>;
 		micbias-resistor-k-ohms = <4>;
 		micbias-voltage-m-volts = <2250>;
@@ -155,7 +155,7 @@
 
 	tda9988: tda9988@70 {
 		compatible = "nxp,tda998x";
-		reg =<0x70>;
+		reg = <0x70>;
 		audio-ports = <TDA998x_I2S 1>;
 
 		#sound-dai-cells = <0>;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-nano.dts b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
index 56929059f5af..d51cdd6e1ab4 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-nano.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
@@ -167,7 +167,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
 	status = "okay";
-	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+	rts-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 	rs485-rts-active-high;
 	rs485-rx-during-tx;
 	rs485-rts-delay = <1 1>;
@@ -178,7 +178,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 	status = "okay";
-	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	rts-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 	rs485-rts-active-high;
 	rs485-rts-delay = <1 1>;
 	linux,rs485-enabled-at-boot-time;
@@ -187,7 +187,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
-	rts-gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+	rts-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
 	rs485-rts-active-high;
 	rs485-rx-during-tx;
 	rs485-rts-delay = <1 1>;
@@ -198,7 +198,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins>;
-	rts-gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+	rts-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 	rs485-rts-active-high;
 	rs485-rx-during-tx;
 	rs485-rts-delay = <1 1>;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
index f66d57bb685e..f0519ab30141 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
@@ -222,10 +222,10 @@
 		"ModeA1",
 		"ModeA2",
 		"ModeA3",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
+		"ModeB0",
+		"ModeB1",
+		"ModeB2",
+		"ModeB3",
 		"NC",
 		"NC",
 		"NC",
diff --git a/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts
index d28d39728847..23caaaabf351 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts
@@ -147,7 +147,7 @@
 	};
 
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts
index ded19e24e666..9f611debc209 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts
@@ -21,7 +21,7 @@
 	compatible = "ti,am33xx";
 
 	chosen {
-		stdout-path = &uart3;
+		stdout-path = "serial3:115200n8";
 	};
 
 	cpus {
@@ -256,8 +256,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
 
-	rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	rs485-rts-active-high;
+	rs485-rx-during-tx;
 	rs485-rts-delay = <0 0>;
 	linux,rs485-enabled-at-boot-time;
 
diff --git a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts
index e7d561a527fd..10d54e0ad15a 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts
@@ -347,7 +347,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wireless_pins>;
-	vmmmc-supply = <&v3v3c_reg>;
+	vmmc-supply = <&v3v3c_reg>;
 	bus-width = <4>;
 	non-removable;
 	dmas = <&edma_xbar 12 0 1
diff --git a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
index 78ce860e59b3..24d9f90fad01 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts
@@ -15,7 +15,7 @@
 	compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
 
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
index 7c9f65126c63..8b47f45a9959 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
@@ -87,7 +87,6 @@
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
-	ti,needs-special-hs-handling;
 	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins>;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
index 757ebd96b3f0..1dc4e344efd6 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
@@ -25,7 +25,7 @@
 	};
 
 	chosen {
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -109,7 +109,7 @@
 		audio_mclk_fixed: oscillator@0 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency  = <24576000>;	/* 24.576MHz */
+			clock-frequency = <24576000>;	/* 24.576MHz */
 		};
 
 		audio_mclk: audio_mclk_gate@0 {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-tqma335x.dtsi b/arch/arm/boot/dts/ti/omap/am335x-tqma335x.dtsi
new file mode 100644
index 000000000000..b75949f0f023
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am335x-tqma335x.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ * Authors: Gregor Herburger, Matthias Schiffer
+ *
+ * Based on:
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am33xx.dtsi"
+
+/ {
+	compatible = "tq,tqma3359", "ti,am33xx";
+
+	aliases {
+		mmc0 = &mmc2;
+		mmc1 = &mmc1;
+		/delete-property/ mmc2;
+		rtc0 = &tps;
+		rtc1 = &ds1339;
+		rtc2 = &rtc;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	/* SOM input voltage */
+	vcc3v3in: regulator-vcc3v3in {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3IN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	/*
+	 * Regulator is enabled by PMIC power sequence. The supplied voltage
+	 * rail is also usable on baseboard.
+	 */
+	vddshv: regulator-vddshv {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDSHV";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3in>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: i2c0-pins {
+		pinctrl-single,pins = <
+			/* i2c0_sda.i2c0_sda */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			/* i2c0_scl.i2c0_scl */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	mmc2_pins: mmc2-pins {
+		pinctrl-single,pins = <
+			/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1)
+			/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1)
+			/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1)
+			/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1)
+			/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1)
+			/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1)
+			/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1)
+			/* gpmc_ad7.mmc1_dat7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1)
+			/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)
+			/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE2)
+		>;
+	};
+
+	spi0_pins: spi0-pins {
+		pinctrl-single,pins = <
+			/* spi0_sclk.spi0_sclk */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
+			/* spi0_d0.spi0_d0 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			/* spi0_d1.spi0_d1 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_OUTPUT, MUX_MODE0)
+			/* spi0_cs0.spi0_cs0 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+};
+
+&cpu {
+	cpu0-supply = <&vdd1_reg>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* optional, not on TQMa335xL */
+	jc42_1: temperature-sensor@1f {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1f>;
+	};
+
+	tps: pmic@2d {
+		reg = <0x2d>;
+		ti,en-ck32k-xtal;
+		/* Filled in by tps65910.dtsi */
+	};
+
+	/* optional, not on TQMa335xL */
+	eeprom: eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&vddshv>;
+	};
+
+	/* optional, not on TQMa335xL */
+	se97btp: eeprom@57 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		vcc-supply = <&vddshv>;
+	};
+
+	/* optional, not on TQMa335xL */
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+#include "../../tps65910.dtsi"
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	bus-width = <8>;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&vddshv>;
+	non-removable;
+	status = "okay";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&tps {
+	vcc1-supply = <&vcc3v3in>;
+	vcc2-supply = <&vcc3v3in>;
+	vcc3-supply = <&vcc3v3in>;
+	vcc4-supply = <&vcc3v3in>;
+	vcc5-supply = <&vcc3v3in>;
+	vcc6-supply = <&vcc3v3in>;
+	vcc7-supply = <&vcc3v3in>;
+	vccio-supply = <&vcc3v3in>;
+};
+
+/* TPS outputs */
+&vrtc_reg {
+	regulator-always-on;
+};
+
+&vio_reg {
+	regulator-always-on;
+};
+
+&vdd1_reg {
+	regulator-name = "vdd_mpu";
+	regulator-min-microvolt = <600000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-boot-on;
+	regulator-always-on;
+};
+
+&vdd2_reg {
+	regulator-name = "vdd_core";
+	regulator-min-microvolt = <600000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-boot-on;
+	regulator-always-on;
+};
+
+&vdd3_reg {
+	regulator-always-on;
+};
+
+&vdig1_reg {
+	regulator-always-on;
+};
+
+&vdig2_reg {
+	regulator-always-on;
+};
+
+&vpll_reg {
+	regulator-always-on;
+};
+
+&vdac_reg {
+	regulator-always-on;
+};
+
+&vaux1_reg {
+	regulator-always-on;
+};
+
+&vaux2_reg {
+	regulator-always-on;
+};
+
+&vaux33_reg {
+	regulator-always-on;
+};
+
+&vmmc_reg {
+	regulator-always-on;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <24000000>;
+		vcc-supply = <&vddshv>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&usb0_phy {
+	vcc-supply = <&vaux1_reg>;
+};
+
+&usb1_phy {
+	vcc-supply = <&vaux1_reg>;
+};
+
+&wkup_m3_ipc {
+	firmware-name = "am335x-evm-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
index d6a143abae5f..89d16fcc773e 100644
--- a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
@@ -200,7 +200,7 @@
 			ranges = <0x0 0x9000 0x1000>;
 
 			uart0: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <72>;
@@ -1108,7 +1108,7 @@
 			ranges = <0x0 0x22000 0x1000>;
 
 			uart1: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <73>;
@@ -1139,7 +1139,7 @@
 			ranges = <0x0 0x24000 0x1000>;
 
 			uart2: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <74>;
@@ -1457,10 +1457,10 @@
 
 			gpio1: gpio@0 {
 				compatible = "ti,omap4-gpio";
-				gpio-ranges =   <&am33xx_pinmux  0  0  8>,
-						<&am33xx_pinmux  8 90  4>,
-						<&am33xx_pinmux 12 12 16>,
-						<&am33xx_pinmux 28 30  4>;
+				gpio-ranges = <&am33xx_pinmux  0  0  8>,
+					      <&am33xx_pinmux  8 90  4>,
+					      <&am33xx_pinmux 12 12 16>,
+					      <&am33xx_pinmux 28 30  4>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -1501,7 +1501,6 @@
 
 			mmc1: mmc@0 {
 				compatible = "ti,am335-sdhci";
-				ti,needs-special-reset;
 				dmas = <&edma 24 0>, <&edma 25 0>;
 				dma-names = "tx", "rx";
 				interrupts = <64>;
@@ -1770,7 +1769,7 @@
 			ranges = <0x0 0xa6000 0x1000>;
 
 			uart3: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <44>;
@@ -1799,7 +1798,7 @@
 			ranges = <0x0 0xa8000 0x1000>;
 
 			uart4: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <45>;
@@ -1828,7 +1827,7 @@
 			ranges = <0x0 0xaa000 0x1000>;
 
 			uart5: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <46>;
@@ -1987,7 +1986,6 @@
 
 			mmc2: mmc@0 {
 				compatible = "ti,am335-sdhci";
-				ti,needs-special-reset;
 				dmas = <&edma 2 0
 					&edma 3 0>;
 				dma-names = "tx", "rx";
diff --git a/arch/arm/boot/dts/ti/omap/am33xx.dtsi b/arch/arm/boot/dts/ti/omap/am33xx.dtsi
index 0614ffdc1578..ca3e7f5d7d0d 100644
--- a/arch/arm/boot/dts/ti/omap/am33xx.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx.dtsi
@@ -45,7 +45,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@0 {
+		cpu: cpu@0 {
 			compatible = "arm,cortex-a8";
 			enable-method = "ti,am3352";
 			device_type = "cpu";
@@ -338,7 +338,6 @@
 
 			mmc3: mmc@0 {
 				compatible = "ti,am335-sdhci";
-				ti,needs-special-reset;
 				interrupts = <29>;
 				reg = <0x0 0x1000>;
 				status = "disabled";
@@ -461,10 +460,10 @@
 
 			cppi41dma: dma-controller@2000 {
 				compatible = "ti,am3359-cppi41";
-				reg =  <0x0000 0x1000>,
-				       <0x2000 0x1000>,
-				       <0x3000 0x1000>,
-				       <0x4000 0x4000>;
+				reg = <0x0000 0x1000>,
+				      <0x2000 0x1000>,
+				      <0x3000 0x1000>,
+				      <0x4000 0x4000>;
 				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
diff --git a/arch/arm/boot/dts/ti/omap/am4372.dtsi b/arch/arm/boot/dts/ti/omap/am4372.dtsi
index 0a1df30f2818..504fa6b57d39 100644
--- a/arch/arm/boot/dts/ti/omap/am4372.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am4372.dtsi
@@ -321,7 +321,6 @@
 
 			mmc3: mmc@0 {
 				compatible = "ti,am437-sdhci";
-				ti,needs-special-reset;
 				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x0 0x1000>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
index 824b9415ebbe..e08f356e71cb 100644
--- a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi
@@ -180,8 +180,7 @@
 			      <0x9058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -698,8 +697,7 @@
 			      <0x22058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -726,8 +724,7 @@
 			      <0x24058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -1106,7 +1103,6 @@
 			mmc1: mmc@0 {
 				compatible = "ti,am437-sdhci";
 				reg = <0x0 0x1000>;
-				ti,needs-special-reset;
 				dmas = <&edma 24 0>,
 					<&edma 25 0>;
 				dma-names = "tx", "rx";
@@ -1385,8 +1381,7 @@
 			      <0xa6058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -1413,8 +1408,7 @@
 			      <0xa8058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -1441,8 +1435,7 @@
 			      <0xaa058 0x4>;
 			reg-names = "rev", "sysc", "syss";
 			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
+					 SYSC_OMAP2_SOFTRESET)>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
@@ -1626,7 +1619,6 @@
 			mmc2: mmc@0 {
 				compatible = "ti,am437-sdhci";
 				reg = <0x0 0x1000>;
-				ti,needs-special-reset;
 				dmas = <&edma 2 0>,
 					<&edma 3 0>;
 				dma-names = "tx", "rx";
diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index e6a18954e449..43cf4ade950b 100644
--- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -545,7 +545,6 @@
 	non-removable;
 	mmc-pwrseq = <&emmc_pwrseq>;
 
-	ti,needs-special-reset;
 	dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
 	dma-names = "tx", "rx";
 
@@ -561,7 +560,6 @@
 	/* DDR50: DDR up to 50 MHz (1.8 V signaling). */
 	status = "okay";
 
-	ti,needs-special-reset;
 	vmmc-supply = <&vdd_3v3>;
 	cap-power-off-card;
 	keep-power-in-suspend;
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
index 994e69ab38d7..87b61a98d5e9 100644
--- a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
@@ -149,7 +149,7 @@
 	gpio_fan: gpio_fan {
 		/* Based on 5v 500mA AFB02505HHB */
 		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+		gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
 		#cooling-cells = <2>;
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts
index 3dd898955e76..77c9fbb3bfbd 100644
--- a/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts
@@ -481,7 +481,6 @@
 	vmmc-supply = <&vdd_3v3>;
 	bus-width = <8>;
 	ti,non-removable;
-	cap-mmc-dual-data-rate;
 };
 
 &qspi {
diff --git a/arch/arm/boot/dts/ti/omap/dm814x.dtsi b/arch/arm/boot/dts/ti/omap/dm814x.dtsi
index a8cd724ce4bc..27d1f35a31fd 100644
--- a/arch/arm/boot/dts/ti/omap/dm814x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm814x.dtsi
@@ -155,10 +155,10 @@
 
 			cppi41dma: dma-controller@47402000 {
 				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
+				reg = <0x47400000 0x1000>,
+				      <0x47402000 0x1000>,
+				      <0x47403000 0x1000>,
+				      <0x47404000 0x4000>;
 				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
diff --git a/arch/arm/boot/dts/ti/omap/dm816x.dtsi b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
index b68686f0643b..407d7bc5b13a 100644
--- a/arch/arm/boot/dts/ti/omap/dm816x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
@@ -643,10 +643,10 @@
 
 			cppi41dma: dma-controller@47402000 {
 				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
+				reg = <0x47400000 0x1000>,
+				      <0x47402000 0x1000>,
+				      <0x47403000 0x1000>,
+				      <0x47404000 0x4000>;
 				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
index 6e67d99832ac..c9282f57ffa5 100644
--- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
@@ -12,6 +12,7 @@
 	ranges = <0x00000000 0x4a000000 0x100000>,	/* segment 0 */
 		 <0x00100000 0x4a100000 0x100000>,	/* segment 1 */
 		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
+	dma-ranges;
 
 	segment@0 {					/* 0x4a000000 */
 		compatible = "simple-pm-bus";
@@ -266,8 +267,8 @@
 					syscon-phy-power = <&scm_conf 0x300>;
 					clocks = <&usb_phy1_always_on_clk32k>,
 						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"refclk";
+					clock-names = "wkupclk",
+						      "refclk";
 					#phy-cells = <0>;
 				};
 
@@ -278,8 +279,8 @@
 					syscon-phy-power = <&scm_conf 0xe74>;
 					clocks = <&usb_phy2_always_on_clk32k>,
 						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"refclk";
+					clock-names = "wkupclk",
+						      "refclk";
 					#phy-cells = <0>;
 				};
 
@@ -293,9 +294,9 @@
 					clocks = <&usb_phy3_always_on_clk32k>,
 						 <&sys_clkin1>,
 						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"sysclk",
-							"refclk";
+					clock-names = "wkupclk",
+						      "sysclk",
+						      "refclk";
 					#phy-cells = <0>;
 				};
 			};
@@ -557,6 +558,7 @@
 			 <0x0007e000 0x0017e000 0x001000>,	/* ap 124 */
 			 <0x00059000 0x00159000 0x001000>,	/* ap 125 */
 			 <0x0005a000 0x0015a000 0x001000>;	/* ap 126 */
+		dma-ranges;
 
 		target-module@2000 {			/* 0x4a102000, ap 27 3c.0 */
 			compatible = "ti,sysc";
diff --git a/arch/arm/boot/dts/ti/omap/dra7.dtsi b/arch/arm/boot/dts/ti/omap/dra7.dtsi
index b709703f6c0d..711ce4c31bb1 100644
--- a/arch/arm/boot/dts/ti/omap/dra7.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7.dtsi
@@ -195,24 +195,22 @@
 			clock-names = "fck", "phy-clk", "phy-clk-div";
 			#size-cells = <1>;
 			#address-cells = <1>;
-			ranges = <0x51000000 0x51000000 0x3000>,
-				 <0x20000000 0x20000000 0x10000000>;
+			ranges = <0x51000000 0x51000000 0x3000
+				  0x0	     0x20000000 0x10000000>;
 			dma-ranges;
 			/**
 			 * To enable PCI endpoint mode, disable the pcie1_rc
 			 * node and enable pcie1_ep mode.
 			 */
 			pcie1_rc: pcie@51000000 {
-				reg = <0x51000000 0x2000>,
-				      <0x51002000 0x14c>,
-				      <0x20001000 0x2000>;
+				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 232 0x4>, <0 233 0x4>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
-				ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>,
-					 <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>;
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -235,10 +233,7 @@
 			};
 
 			pcie1_ep: pcie_ep@51000000 {
-				reg = <0x51000000 0x28>,
-				      <0x51002000 0x14c>,
-				      <0x51001000 0x28>,
-				      <0x20001000 0x10000000>;
+				reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
 				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
 				interrupts = <0 232 0x4>;
 				num-lanes = <1>;
@@ -269,21 +264,19 @@
 			reset-names = "rstctrl";
 			#size-cells = <1>;
 			#address-cells = <1>;
-			ranges = <0x51800000 0x51800000 0x3000>,
-				 <0x30000000 0x30000000 0x10000000>;
+			ranges = <0x51800000 0x51800000 0x3000
+				  0x0	     0x30000000 0x10000000>;
 			dma-ranges;
 			status = "disabled";
 			pcie2_rc: pcie@51800000 {
-				reg = <0x51800000 0x2000>,
-				      <0x51802000 0x14c>,
-				      <0x30001000 0x2000>;
+				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 355 0x4>, <0 356 0x4>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
-				ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>,
-					 <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>;
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
diff --git a/arch/arm/boot/dts/ti/omap/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
index f747ac56eb92..1d2df8128cfe 100644
--- a/arch/arm/boot/dts/ti/omap/dra71-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
@@ -83,10 +83,10 @@
 		compatible = "ti,lp8733";
 		reg = <0x60>;
 
-		buck0-in-supply =<&vsys_3v3>;
-		buck1-in-supply =<&vsys_3v3>;
-		ldo0-in-supply =<&evm_5v0>;
-		ldo1-in-supply =<&evm_5v0>;
+		buck0-in-supply = <&vsys_3v3>;
+		buck1-in-supply = <&vsys_3v3>;
+		ldo0-in-supply = <&evm_5v0>;
+		ldo1-in-supply = <&evm_5v0>;
 
 		lp8733_regulators: regulators {
 			lp8733_buck0_reg: buck0 {
@@ -131,10 +131,10 @@
 		compatible = "ti,lp8732";
 		reg = <0x61>;
 
-		buck0-in-supply =<&vsys_3v3>;
-		buck1-in-supply =<&vsys_3v3>;
-		ldo0-in-supply =<&vsys_3v3>;
-		ldo1-in-supply =<&vsys_3v3>;
+		buck0-in-supply = <&vsys_3v3>;
+		buck1-in-supply = <&vsys_3v3>;
+		ldo0-in-supply = <&vsys_3v3>;
+		ldo1-in-supply = <&vsys_3v3>;
 
 		lp8732_regulators: regulators {
 			lp8732_buck0_reg: buck0 {
diff --git a/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts b/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts
index 08ee0f8ea68f..71b39a923d37 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts
@@ -291,7 +291,7 @@
 		};
 
 		twl_power: power {
-			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
+			compatible = "ti,twl4030-power-idle-osc-off";
 			ti,use_poweroff;
 		};
 	};
diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
index 07d5894ebb74..910e3b54f530 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
@@ -275,8 +275,8 @@
 
 	ethernet@6,0 {
 		compatible = "davicom,dm9000";
-		reg =  <6 0x000 2>,
-		       <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+		reg = <6 0x000 2>,
+		      <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
 		bank-width = <2>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
index a7f99ae0c1fe..78c657429f64 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
@@ -65,7 +65,7 @@
 		ti,debounce-max = /bits/ 16 <10>;
 		ti,debounce-tol = /bits/ 16 <5>;
 		ti,debounce-rep = /bits/ 16 <1>;
-		ti,keep-vref-on = <1>;
+		ti,keep-vref-on;
 		ti,settle-delay-usec = /bits/ 16 <150>;
 
 		wakeup-source;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi
index e27837093e43..70e33cdd519a 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-evm-processor-common.dtsi
@@ -205,7 +205,7 @@
 
 /* T2_GPIO_2 low to route GPIO_61 to on-board devices */
 &twl_gpio {
-	en_on_board_gpio_61 {
+	en-on-board-gpio-61-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
index 2ee3ddd64020..1b18ed8c1f7a 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi
@@ -446,6 +446,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <
 			&hsusb2_2_pins
+			&mcspi3hog_pins
 	>;
 
 	hsusb2_2_pins: hsusb2-2-pins {
@@ -459,6 +460,15 @@
 		>;
 	};
 
+	mcspi3hog_pins: mcspi3hog-pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* etk_d3 */
+		>;
+	};
+
 	spi_gpio_pins: spi-gpio-pinmux-pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
@@ -591,8 +601,10 @@
 		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
 		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;	/* GPIO_160 */
 		ti,x-plate-ohms = <600>;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <640>;
+		touchscreen-size-x = <0xf00>;
+		touchscreen-size-y = <0xf00>;
+		touchscreen-min-x = <0x100>;
+		touchscreen-min-y = <0x100>;
 		touchscreen-max-pressure = <1000>;
 		touchscreen-fuzz-x = <3>;
 		touchscreen-fuzz-y = <8>;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-n900.dts b/arch/arm/boot/dts/ti/omap/omap3-n900.dts
index 4bde3342bb95..7db73d9bed9e 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-n900.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-n900.dts
@@ -508,7 +508,7 @@
 	};
 
 	twl_power: power {
-		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+		compatible = "ti,twl4030-power-idle-osc-off";
 		ti,use_poweroff;
 	};
 };
@@ -816,8 +816,6 @@
 		reg = <0x0c>;
 
 		VANA-supply = <&vaux4>;
-
-		#io-channel-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
index 07bec48dc441..959fdeeb769e 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
@@ -57,8 +57,8 @@
 		&mmc1_aux_pins
 	>;
 
-	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
-	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+	wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
+	cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
 };
 
 &dss {
diff --git a/arch/arm/boot/dts/ti/omap/omap3.dtsi b/arch/arm/boot/dts/ti/omap/omap3.dtsi
index 92cd4c99dae7..817474ee2d13 100644
--- a/arch/arm/boot/dts/ti/omap/omap3.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3.dtsi
@@ -862,14 +862,14 @@
 			#size-cells = <1>;
 			ranges;
 
-			usbhsohci: ohci@48064400 {
+			usbhsohci: usb@48064400 {
 				compatible = "ti,ohci-omap3";
 				reg = <0x48064400 0x400>;
 				interrupts = <76>;
 				remote-wakeup-connected;
 			};
 
-			usbhsehci: ehci@48064800 {
+			usbhsehci: usb@48064800 {
 				compatible = "ti,ehci-omap";
 				reg = <0x48064800 0x400>;
 				interrupts = <77>;
diff --git a/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
index 3fcef3080eae..4ee53dfb71b4 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-l4.dtsi
@@ -302,14 +302,14 @@
 					      "refclk_60m_ext_p1",
 					      "refclk_60m_ext_p2";
 
-				usbhsohci: ohci@800 {
+				usbhsohci: usb@800 {
 					compatible = "ti,ohci-omap3";
 					reg = <0x800 0x400>;
 					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 					remote-wakeup-connected;
 				};
 
-				usbhsehci: ehci@c00 {
+				usbhsehci: usb@c00 {
 					compatible = "ti,ehci-omap";
 					reg = <0xc00 0x400>;
 					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -1414,7 +1414,7 @@
 			uart3: serial@0 {
 				compatible = "ti,omap4-uart";
 				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
 			};
 		};
@@ -1765,7 +1765,7 @@
 			uart1: serial@0 {
 				compatible = "ti,omap4-uart";
 				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
 			};
 		};
@@ -1794,7 +1794,7 @@
 			uart2: serial@0 {
 				compatible = "ti,omap4-uart";
 				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
 			};
 		};
@@ -1823,7 +1823,7 @@
 			uart4: serial@0 {
 				compatible = "ti,omap4-uart";
 				reg = <0x0 0x100>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
 			};
 		};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts b/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts
index 8fd076e5d1b0..4b8bfd0188ad 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts
@@ -7,6 +7,11 @@
 #include "omap443x.dtsi"
 #include "omap4-panda-common.dtsi"
 
+/ {
+	model = "TI OMAP4 PandaBoard (A4)";
+	compatible = "ti,omap4-panda-a4", "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+};
+
 /* Pandaboard Rev A4+ have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi b/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
index 97706d6296a6..05c871d31d7b 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
@@ -130,6 +130,12 @@
 		clock-frequency = <19200000>;
 	};
 
+	wl12xx_pwrseq: wl12xx-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&twl 0>;
+		clock-names = "ext_clock";
+	};
+
 	/* regulator for wl12xx on sdio5 */
 	wl12xx_vmmc: wl12xx_vmmc {
 		pinctrl-names = "default";
@@ -361,10 +367,8 @@
 	 */
 	wl12xx_gpio: wl12xx-gpio-pins {
 		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 - WLAN_EN */
 			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
 		>;
 	};
 
@@ -387,6 +391,22 @@
 			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpio_121 */
 		>;
 	};
+
+	bt_pins: bt-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)	  /* gpmc_a22.gpio_46 - BTEN */
+			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 - BTWAKEUP */
+		>;
+	};
+
+	uart2_pins: uart2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)  /* uart2_cts.uart2_cts - HCI */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)	  /* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)  /* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)	  /* uart2_tx.uart2_tx */
+		>;
+	};
 };
 
 &omap4_pmx_wkup {
@@ -408,6 +428,7 @@
 		reg = <0x48>;
 		/* IRQ# = 7 */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		#clock-cells = <1>;
 		system-power-controller;
 	};
 
@@ -488,6 +509,7 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	mmc-pwrseq = <&wl12xx_pwrseq>;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -523,8 +545,19 @@
 };
 
 &uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
 	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core OMAP4_UART2_RX>;
+
+	bluetooth {
+		compatible = "ti,wl1271-st";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;	/* GPIO_46 */
+		clocks = <&twl 0>;
+		clock-names = "ext_clock";
+	};
 };
 
 &uart3 {
diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts b/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
index fe7b156d10ed..a933fe560834 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts
@@ -49,22 +49,6 @@
 			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
 		>;
 	};
-
-	bt_pins: bt-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 - BTEN */
-			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 - BTWAKEUP */
-		>;
-	};
-
-	uart2_pins: uart2-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts - HCI */
-			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
 };
 
 &led_wkgpio_pins {
@@ -96,19 +80,3 @@
 &gpio1_target {
 	 ti,no-reset-on-init;
 };
-
-&wl12xx_gpio {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-		OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-	>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins &bt_pins>;
-	bluetooth: tiwi {
-		compatible = "ti,wl1271-st";
-		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;	/* GPIO_46 */
-	};
-};
diff --git a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
index b535d24c6140..b550105585a1 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
@@ -467,7 +467,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	eth@0 {
+	ethernet@0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ks8851_pins>;
 
diff --git a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
index cadc7e02592b..80e89a2f8be1 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
@@ -194,7 +194,7 @@
 	pinctrl-0 = <&mcspi1_pins>;
 	status = "okay";
 
-	eth@0 {
+	ethernet@0 {
 		compatible = "ks8851";
 		pinctrl-names = "default";
 		pinctrl-0 = <&ks8851_irq_pins>;
diff --git a/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi b/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
index 3b505fe415ed..9f6100c7c34d 100644
--- a/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap5-l4.dtsi
@@ -331,14 +331,14 @@
 					      "refclk_60m_ext_p1",
 					      "refclk_60m_ext_p2";
 
-				usbhsohci: ohci@800 {
+				usbhsohci: usb@800 {
 					compatible = "ti,ohci-omap3";
 					reg = <0x800 0x400>;
 					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 					remote-wakeup-connected;
 				};
 
-				usbhsehci: ehci@c00 {
+				usbhsehci: usb@c00 {
 					compatible = "ti,ehci-omap";
 					reg = <0xc00 0x400>;
 					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/vt8500/Makefile b/arch/arm/boot/dts/vt8500/Makefile
index 255f4403af91..6fd29c41f366 100644
--- a/arch/arm/boot/dts/vt8500/Makefile
+++ b/arch/arm/boot/dts/vt8500/Makefile
@@ -4,4 +4,5 @@ dtb-$(CONFIG_ARCH_VT8500) += \
 	wm8505-ref.dtb \
 	wm8650-mid.dtb \
 	wm8750-apc8750.dtb \
-	wm8850-w70v2.dtb
+	wm8850-w70v2.dtb \
+	wm8950-apc-rock.dtb
diff --git a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts
index 38a2da5e2c5d..c8c07c2b4acf 100644
--- a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts
+++ b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts
@@ -10,6 +10,11 @@
 
 / {
 	model = "Benign BV07 Netbook";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
 };
 
 &fb {
diff --git a/arch/arm/boot/dts/vt8500/vt8500.dtsi b/arch/arm/boot/dts/vt8500/vt8500.dtsi
index f23cb5ee11ae..9b87b1289792 100644
--- a/arch/arm/boot/dts/vt8500/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500/vt8500.dtsi
@@ -11,20 +11,16 @@
 	compatible = "via,vt8500";
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -55,6 +51,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -106,10 +107,10 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <43>;
@@ -121,7 +122,7 @@
 			interrupts = <43>;
 		};
 
-		fb: fb@d8050800 {
+		fb: lcd-controller@d800e400 {
 			compatible = "via,vt8500-fb";
 			reg = <0xd800e400 0x400>;
 			interrupts = <12>;
diff --git a/arch/arm/boot/dts/vt8500/wm8505-ref.dts b/arch/arm/boot/dts/vt8500/wm8505-ref.dts
index 8ce9e2ef0a81..d4ff99c70012 100644
--- a/arch/arm/boot/dts/vt8500/wm8505-ref.dts
+++ b/arch/arm/boot/dts/vt8500/wm8505-ref.dts
@@ -10,6 +10,11 @@
 
 / {
 	model = "Wondermedia WM8505 Netbook";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
 };
 
 &fb {
diff --git a/arch/arm/boot/dts/vt8500/wm8505.dtsi b/arch/arm/boot/dts/vt8500/wm8505.dtsi
index d9e1280372c5..915adbf6e1e0 100644
--- a/arch/arm/boot/dts/vt8500/wm8505.dtsi
+++ b/arch/arm/boot/dts/vt8500/wm8505.dtsi
@@ -11,20 +11,16 @@
 	compatible = "wm,wm8505";
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
  	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -66,6 +62,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -204,10 +205,10 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007100 {
+		usb@d8007100 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007100 0x200>;
 			interrupts = <1>;
@@ -283,7 +284,7 @@
 			interrupts = <48>;
 		};
 
-		sdhc@d800a000 {
+		mmc@d800a000 {
 			compatible = "wm,wm8505-sdhc";
 			reg = <0xd800a000 0x400>;
 			interrupts = <20>, <21>;
diff --git a/arch/arm/boot/dts/vt8500/wm8650-mid.dts b/arch/arm/boot/dts/vt8500/wm8650-mid.dts
index 7977b6c1e8eb..bfc570e80073 100644
--- a/arch/arm/boot/dts/vt8500/wm8650-mid.dts
+++ b/arch/arm/boot/dts/vt8500/wm8650-mid.dts
@@ -10,6 +10,11 @@
 
 / {
 	model = "Wondermedia WM8650-MID Tablet";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
 };
 
 &fb {
diff --git a/arch/arm/boot/dts/vt8500/wm8650.dtsi b/arch/arm/boot/dts/vt8500/wm8650.dtsi
index 35d12d77efc0..82eef7504364 100644
--- a/arch/arm/boot/dts/vt8500/wm8650.dtsi
+++ b/arch/arm/boot/dts/vt8500/wm8650.dtsi
@@ -11,20 +11,16 @@
 	compatible = "wm,wm8650";
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
  	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -62,6 +58,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -176,10 +177,10 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <43>;
@@ -191,7 +192,7 @@
 			interrupts = <43>;
 		};
 
-		sdhc@d800a000 {
+		mmc@d800a000 {
 			compatible = "wm,wm8505-sdhc";
 			reg = <0xd800a000 0x400>;
 			interrupts = <20>, <21>;
diff --git a/arch/arm/boot/dts/vt8500/wm8750-apc8750.dts b/arch/arm/boot/dts/vt8500/wm8750-apc8750.dts
index 136e812bc1e4..72d633bedff0 100644
--- a/arch/arm/boot/dts/vt8500/wm8750-apc8750.dts
+++ b/arch/arm/boot/dts/vt8500/wm8750-apc8750.dts
@@ -11,6 +11,11 @@
 
 / {
 	model = "VIA APC8750";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
 };
 
 &pinctrl {
diff --git a/arch/arm/boot/dts/vt8500/wm8750.dtsi b/arch/arm/boot/dts/vt8500/wm8750.dtsi
index b292f85d4e69..5342b7fe4ef8 100644
--- a/arch/arm/boot/dts/vt8500/wm8750.dtsi
+++ b/arch/arm/boot/dts/vt8500/wm8750.dtsi
@@ -11,20 +11,16 @@
 	compatible = "wm,wm8750";
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,arm1176jzf";
+			reg = <0x0>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -68,6 +64,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -248,10 +249,10 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <26>;
@@ -323,7 +324,7 @@
 			interrupts = <48>;
 		};
 
-		sdhc@d800a000 {
+		mmc@d800a000 {
 			compatible = "wm,wm8505-sdhc";
 			reg = <0xd800a000 0x1000>;
 			interrupts = <20 21>;
diff --git a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts
index 5d409323b10c..eb16991a2ccc 100644
--- a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts
+++ b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts
@@ -22,6 +22,11 @@
 		brightness-levels = <0 40 60 80 100 130 190 255>;
 		default-brightness-level = <5>;
 	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
 };
 
 &fb {
diff --git a/arch/arm/boot/dts/vt8500/wm8850.dtsi b/arch/arm/boot/dts/vt8500/wm8850.dtsi
index c61717ebb4f1..58109aa05f74 100644
--- a/arch/arm/boot/dts/vt8500/wm8850.dtsi
+++ b/arch/arm/boot/dts/vt8500/wm8850.dtsi
@@ -18,14 +18,10 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x0>;
+			next-level-cache = <&l2_cache>;
 		};
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -65,6 +61,11 @@
 			#gpio-cells = <2>;
 		};
 
+		chipid@d8120000 {
+			compatible = "via,vt8500-scc-id";
+			reg = <0xd8120000 0x4>;
+		};
+
 		pmc@d8130000 {
 			compatible = "via,vt8500-pmc";
 			reg = <0xd8130000 0x1000>;
@@ -235,10 +236,10 @@
 		timer@d8130100 {
 			compatible = "via,vt8500-timer";
 			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
+			interrupts = <36>, <37>, <38>, <39>;
 		};
 
-		ehci@d8007900 {
+		usb@d8007900 {
 			compatible = "via,vt8500-ehci";
 			reg = <0xd8007900 0x200>;
 			interrupts = <26>;
@@ -294,7 +295,7 @@
 			interrupts = <48>;
 		};
 
-		sdhc@d800a000 {
+		mmc@d800a000 {
 			compatible = "wm,wm8505-sdhc";
 			reg = <0xd800a000 0x1000>;
 			interrupts = <20 21>;
@@ -308,5 +309,18 @@
 			reg = <0xd8004000 0x100>;
 			interrupts = <10>;
                 };
+
+		l2_cache: cache-controller@d9000000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xd9000000 0x1000>;
+			arm,double-linefill = <1>;
+			arm,dynamic-clock-gating = <1>;
+			arm,shared-override;
+			arm,standby-mode = <1>;
+			cache-level = <2>;
+			cache-unified;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/vt8500/wm8950-apc-rock.dts b/arch/arm/boot/dts/vt8500/wm8950-apc-rock.dts
new file mode 100644
index 000000000000..58b3c8deb4f2
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500/wm8950-apc-rock.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2025 Alexey Charkov <alchark@gmail.com>
+ */
+
+/dts-v1/;
+/include/ "wm8950.dtsi"
+
+/ {
+	model = "VIA APC Rock";
+	compatible = "via,apc-rock", "wm,wm8950";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vt8500/wm8950.dtsi b/arch/arm/boot/dts/vt8500/wm8950.dtsi
new file mode 100644
index 000000000000..31fba05d3c3e
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500/wm8950.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2025 Alexey Charkov <alchark@gmail.com>
+ */
+
+/* No differences have been discovered vs. WM8850, but chip markings differ */
+/include/ "wm8850.dtsi"
+
+/ {
+	compatible = "wm,wm8950";
+};
diff --git a/arch/arm/boot/dts/xilinx/zynq-7000.dtsi b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi
index a7db3f3009f2..153b8d93cbee 100644
--- a/arch/arm/boot/dts/xilinx/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/xilinx/zynq-7000.dtsi
@@ -8,6 +8,13 @@
 	#size-cells = <1>;
 	compatible = "xlnx,zynq-7000";
 
+	options {
+		u-boot {
+			compatible = "u-boot,config";
+			bootscr-address = /bits/ 64 <0x3000000>;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -34,7 +41,7 @@
 		};
 	};
 
-	fpga_full: fpga-full {
+	fpga_full: fpga-region {
 		compatible = "fpga-region";
 		fpga-mgr = <&devcfg>;
 		#address-cells = <1>;
@@ -93,6 +100,7 @@
 	};
 
 	amba: axi {
+		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -190,6 +198,17 @@
 			reg = <0xf8006000 0x1000>;
 		};
 
+		ocm: sram@fffc0000 {
+			compatible = "mmio-sram";
+			reg = <0xfffc0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xfffc0000 0x10000>;
+			ocm-sram@0 {
+				reg = <0x0 0x10000>;
+			};
+		};
+
 		uart0: serial@e0000000 {
 			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 			status = "disabled";
@@ -277,13 +296,18 @@
 				  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 18 4>;
 
 			nfc0: nand-controller@0,0 {
 				compatible = "arm,pl353-nand-r2p1";
 				reg = <0 0 0x1000000>;
 				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
+			};
+			nor0: flash@1,0 {
+				status = "disabled";
+				compatible = "cfi-flash";
+				reg = <1 0 0x2000000>;
 			};
 		};
 
@@ -308,12 +332,14 @@
 		};
 
 		slcr: slcr@f8000000 {
+			bootph-all;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
+				bootph-all;
 				#clock-cells = <1>;
 				compatible = "xlnx,ps7-clkc";
 				fclk-enable = <0>;
@@ -398,6 +424,7 @@
 		};
 
 		scutimer: timer@f8f00600 {
+			bootph-all;
 			interrupt-parent = <&intc>;
 			interrupts = <1 13 0x301>;
 			compatible = "arm,cortex-a9-twd-timer";
diff --git a/arch/arm/boot/dts/xilinx/zynq-cc108.dts b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
index 8b9ab9bba23b..f5525c048426 100644
--- a/arch/arm/boot/dts/xilinx/zynq-cc108.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
@@ -18,6 +18,7 @@
 	aliases {
 		ethernet0 = &gem0;
 		serial0 = &uart0;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -48,7 +49,44 @@
 
 	ethernet_phy: ethernet-phy@1 {
 		reg = <1>;
-		device_type = "ethernet-phy";
+	};
+};
+
+&qspi {
+	status = "okay";
+	num-cs = <1>;
+	flash@0 { /* 16 MB */
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "qspi-fsbl-uboot-bs";
+			reg = <0x0 0x400000>; /* 4MB */
+		};
+		partition@400000 {
+			label = "qspi-linux";
+			reg = <0x400000 0x400000>; /* 4MB */
+		};
+		partition@800000 {
+			label = "qspi-rootfs";
+			reg = <0x800000 0x400000>; /* 4MB */
+		};
+		partition@c00000 {
+			label = "qspi-devicetree";
+			reg = <0xc00000 0x100000>; /* 1MB */
+		};
+		partition@d00000 {
+			label = "qspi-scratch";
+			reg = <0xd00000 0x200000>; /* 2MB */
+		};
+		partition@f00000 {
+			label = "qspi-uboot-env";
+			reg = <0xf00000 0x100000>; /* 1MB */
+		};
 	};
 };
 
@@ -59,6 +97,7 @@
 };
 
 &uart0 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts
index 53fa6dbfd8fd..14f644156a6f 100644
--- a/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-ebaz4205.dts
@@ -51,6 +51,8 @@
 &nfc0 {
 	status = "okay";
 
+	#address-cells = <1>;
+	#size-cells = <0>;
 	nand@0 {
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/xilinx/zynq-microzed.dts b/arch/arm/boot/dts/xilinx/zynq-microzed.dts
index 6ed84fb15902..68b867e8369e 100644
--- a/arch/arm/boot/dts/xilinx/zynq-microzed.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-microzed.dts
@@ -11,8 +11,9 @@
 	compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
 
 	aliases {
-		ethernet0 = &gem0;
 		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
 	};
 
 	memory@0 {
@@ -35,6 +36,11 @@
 	ps-clk-frequency = <33333333>;
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+};
+
 &gem0 {
 	status = "okay";
 	phy-mode = "rgmii-id";
@@ -46,10 +52,12 @@
 };
 
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/xilinx/zynq-parallella.dts b/arch/arm/boot/dts/xilinx/zynq-parallella.dts
index 54592aeb92b9..366af4fcf8d9 100644
--- a/arch/arm/boot/dts/xilinx/zynq-parallella.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-parallella.dts
@@ -46,7 +46,6 @@
 		compatible = "ethernet-phy-id0141.0e90",
 		             "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
-		device_type = "ethernet-phy";
 		marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
 		                   <0x3 0x11 0xfff0 0xa>;
 	};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc702.dts b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
index 6efdbca9d3ef..6955637c5b1a 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc702.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
@@ -15,7 +15,10 @@
 		ethernet0 = &gem0;
 		i2c0 = &i2c0;
 		serial0 = &uart1;
+		spi0 = &qspi;
 		mmc0 = &sdhci0;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
 	};
 
 	memory@0 {
@@ -63,19 +66,6 @@
 	};
 };
 
-&amba {
-	ocm: sram@fffc0000 {
-		compatible = "mmio-sram";
-		reg = <0xfffc0000 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfffc0000 0x10000>;
-		ocm-sram@0 {
-			reg = <0x0 0x10000>;
-		};
-	};
-};
-
 &can0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -95,7 +85,6 @@
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
-		device_type = "ethernet-phy";
 	};
 };
 
@@ -152,7 +141,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			eeprom@54 {
+			eeprom: eeprom@54 {
 				compatible = "atmel,24c08";
 				reg = <0x54>;
 			};
@@ -174,7 +163,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			rtc@51 {
+			rtc: rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
 			};
@@ -210,7 +199,7 @@
 		conf {
 			groups = "can0_9_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -233,7 +222,7 @@
 		conf {
 			groups = "ethernet0_0_grp";
 			slew-rate = <0>;
-			io-standard = <4>;
+			power-source = <4>;
 		};
 
 		conf-rx {
@@ -256,7 +245,7 @@
 		conf-mdio {
 			groups = "mdio0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 	};
@@ -274,7 +263,7 @@
 				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
 				 "gpio0_13_grp", "gpio0_14_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-pull-up {
@@ -298,11 +287,11 @@
 			groups = "i2c0_10_grp";
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
-	pinctrl_i2c0_gpio: i2c0-gpio {
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		mux {
 			groups = "gpio0_50_grp", "gpio0_51_grp";
 			function = "gpio0";
@@ -311,7 +300,7 @@
 		conf {
 			groups = "gpio0_50_grp", "gpio0_51_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -324,7 +313,7 @@
 		conf {
 			groups = "sdio0_2_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 
@@ -338,7 +327,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		mux-wp {
@@ -351,7 +340,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -364,7 +353,7 @@
 		conf {
 			groups = "uart1_10_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -387,7 +376,7 @@
 		conf {
 			groups = "usb0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -403,13 +392,53 @@
 	};
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "qspi-fsbl-uboot";
+				reg = <0x0 0x100000>;
+			};
+			partition@100000 {
+				label = "qspi-linux";
+				reg = <0x100000 0x500000>;
+			};
+			partition@600000 {
+				label = "qspi-device-tree";
+				reg = <0x600000 0x20000>;
+			};
+			partition@620000 {
+				label = "qspi-rootfs";
+				reg = <0x620000 0x5e0000>;
+			};
+			partition@c00000 {
+				label = "qspi-bitstream";
+				reg = <0xc00000 0x400000>;
+			};
+		};
+	};
+};
+
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_default>;
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc706.dts b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
index 77943c16d33f..3b803c698473 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc706.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
@@ -14,7 +14,10 @@
 		ethernet0 = &gem0;
 		i2c0 = &i2c0;
 		serial0 = &uart1;
+		spi0 = &qspi;
 		mmc0 = &sdhci0;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
 	};
 
 	memory@0 {
@@ -46,7 +49,6 @@
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
-		device_type = "ethernet-phy";
 	};
 };
 
@@ -100,7 +102,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			eeprom@54 {
+			eeprom: eeprom@54 {
 				compatible = "atmel,24c08";
 				reg = <0x54>;
 			};
@@ -122,7 +124,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			rtc@51 {
+			rtc: rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
 			};
@@ -150,7 +152,7 @@
 		conf {
 			groups = "ethernet0_0_grp";
 			slew-rate = <0>;
-			io-standard = <4>;
+			power-source = <4>;
 		};
 
 		conf-rx {
@@ -173,7 +175,7 @@
 		conf-mdio {
 			groups = "mdio0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 	};
@@ -187,7 +189,7 @@
 		conf {
 			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-pull-up {
@@ -211,7 +213,7 @@
 			groups = "i2c0_10_grp";
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -224,7 +226,7 @@
 		conf {
 			groups = "sdio0_2_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 			bias-disable;
 		};
 
@@ -238,7 +240,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		mux-wp {
@@ -251,7 +253,7 @@
 			bias-high-impedance;
 			bias-pull-up;
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 	};
 
@@ -264,7 +266,7 @@
 		conf {
 			groups = "uart1_10_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -287,7 +289,7 @@
 		conf {
 			groups = "usb0_0_grp";
 			slew-rate = <0>;
-			io-standard = <1>;
+			power-source = <1>;
 		};
 
 		conf-rx {
@@ -303,13 +305,54 @@
 	};
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+	num-cs = <2>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>, <1>;
+		parallel-memories = /bits/ 64 <0x1000000 0x1000000>; /* 16MB */
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "qspi-fsbl-uboot";
+				reg = <0x0 0x100000>;
+			};
+			partition@100000 {
+				label = "qspi-linux";
+				reg = <0x100000 0x500000>;
+			};
+			partition@600000 {
+				label = "qspi-device-tree";
+				reg = <0x600000 0x20000>;
+			};
+			partition@620000 {
+				label = "qspi-rootfs";
+				reg = <0x620000 0x5e0000>;
+			};
+			partition@c00000 {
+				label = "qspi-bitstream";
+				reg = <0xc00000 0x400000>;
+			};
+		};
+	};
+};
+
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdhci0_default>;
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_default>;
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
index 0dd352289a45..5fe799c3c7cf 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
@@ -15,6 +15,7 @@
 		ethernet0 = &gem0;
 		i2c0 = &i2c0;
 		serial0 = &uart1;
+		spi0 = &qspi;
 		spi1 = &spi1;
 	};
 
@@ -45,7 +46,6 @@
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
-		device_type = "ethernet-phy";
 	};
 };
 
@@ -57,7 +57,43 @@
 		compatible = "atmel,24c02";
 		reg = <0x52>;
 	};
+};
 
+&qspi {
+	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "qspi-fsbl-uboot";
+				reg = <0x0 0x100000>;
+			};
+			partition@100000 {
+				label = "qspi-linux";
+				reg = <0x100000 0x500000>;
+			};
+			partition@600000 {
+				label = "qspi-device-tree";
+				reg = <0x600000 0x20000>;
+			};
+			partition@620000 {
+				label = "qspi-rootfs";
+				reg = <0x620000 0x5e0000>;
+			};
+			partition@c00000 {
+				label = "qspi-bitstream";
+				reg = <0xc00000 0x400000>;
+			};
+		};
+	};
 };
 
 &sdhci0 {
@@ -85,6 +121,7 @@
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts
index 56732e8f6ca1..f9a086fe66d3 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm011.dts
@@ -47,6 +47,36 @@
 	};
 };
 
+&nfc0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	nand@0 {
+		reg = <0>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "nand-fsbl-uboot";
+				reg = <0x0 0x1000000>;
+			};
+			partition@1000000 {
+				label = "nand-linux";
+				reg = <0x1000000 0x2000000>;
+			};
+			partition@3000000 {
+				label = "nand-rootfs";
+				reg = <0x3000000 0x200000>;
+			};
+		};
+	};
+};
+
+&smcc {
+	status = "okay";
+};
+
 &spi0 {
 	status = "okay";
 	num-cs = <4>;
@@ -54,6 +84,7 @@
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts
index d2359b789eb8..24520e7d3965 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm012.dts
@@ -53,6 +53,40 @@
 	};
 };
 
+&nor0 {
+	status = "okay";
+	bank-width = <1>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "nor-fsbl-uboot";
+			reg = <0x0 0x100000>;
+		};
+		partition@100000 {
+			label = "nor-linux";
+			reg = <0x100000 0x500000>;
+		};
+		partition@600000 {
+			label = "nor-device-tree";
+			reg = <0x600000 0x20000>;
+		};
+		partition@620000 {
+			label = "nor-rootfs";
+			reg = <0x620000 0x5e0000>;
+		};
+		partition@c00000 {
+			label = "nor-bitstream";
+			reg = <0xc00000 0x400000>;
+		};
+	};
+};
+
+&smcc {
+	status = "okay";
+};
+
 &spi1 {
 	status = "okay";
 	num-cs = <4>;
@@ -60,5 +94,6 @@
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
index 38d96adc870c..103e87ea7253 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
@@ -15,6 +15,7 @@
 		ethernet0 = &gem1;
 		i2c0 = &i2c1;
 		serial0 = &uart0;
+		spi0 = &qspi;
 		spi1 = &spi0;
 	};
 
@@ -40,7 +41,6 @@
 
 	ethernet_phy: ethernet-phy@7 {
 		reg = <7>;
-		device_type = "ethernet-phy";
 	};
 };
 
@@ -58,6 +58,44 @@
 	};
 };
 
+&qspi {
+	status = "okay";
+	num-cs = <2>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>, <1>;
+		parallel-memories = /bits/ 64 <0x1000000 0x1000000>; /* 16MB */
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "qspi-fsbl-uboot";
+				reg = <0x0 0x100000>;
+			};
+			partition@100000 {
+				label = "qspi-linux";
+				reg = <0x100000 0x500000>;
+			};
+			partition@600000 {
+				label = "qspi-device-tree";
+				reg = <0x600000 0x20000>;
+			};
+			partition@620000 {
+				label = "qspi-rootfs";
+				reg = <0x620000 0x5e0000>;
+			};
+			partition@c00000 {
+				label = "qspi-bitstream";
+				reg = <0xc00000 0x400000>;
+			};
+		};
+	};
+};
+
 &spi0 {
 	status = "okay";
 	num-cs = <4>;
@@ -73,5 +111,6 @@
 };
 
 &uart0 {
+	bootph-all;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/xilinx/zynq-zed.dts b/arch/arm/boot/dts/xilinx/zynq-zed.dts
index 6a5a93aa6552..52ba569b2b9f 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zed.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zed.dts
@@ -13,6 +13,7 @@
 	aliases {
 		ethernet0 = &gem0;
 		serial0 = &uart1;
+		spi0 = &qspi;
 		mmc0 = &sdhci0;
 	};
 
@@ -43,15 +44,55 @@
 
 	ethernet_phy: ethernet-phy@0 {
 		reg = <0>;
-		device_type = "ethernet-phy";
+	};
+};
+
+&qspi {
+	bootph-all;
+	status = "okay";
+	num-cs = <1>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "qspi-fsbl-uboot";
+				reg = <0x0 0x100000>;
+			};
+			partition@100000 {
+				label = "qspi-linux";
+				reg = <0x100000 0x500000>;
+			};
+			partition@600000 {
+				label = "qspi-device-tree";
+				reg = <0x600000 0x20000>;
+			};
+			partition@620000 {
+				label = "qspi-rootfs";
+				reg = <0x620000 0x5e0000>;
+			};
+			partition@c00000 {
+				label = "qspi-bitstream";
+				reg = <0xc00000 0x400000>;
+			};
+		};
 	};
 };
 
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
index 33b02e05ce82..defef9c8da13 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
+++ b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
@@ -63,6 +63,11 @@
 	ps-clk-frequency = <33333333>;
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+};
+
 &gem0 {
 	status = "okay";
 	phy-mode = "rgmii-id";
@@ -73,14 +78,17 @@
 };
 
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
index 7b87e10d3953..56b917eec783 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
@@ -10,6 +10,8 @@
 	aliases {
 		ethernet0 = &gem0;
 		serial0 = &uart1;
+		spi0 = &qspi;
+		mmc0 = &sdhci0;
 	};
 
 	memory@0 {
@@ -49,15 +51,21 @@
 
 	ethernet_phy: ethernet-phy@0 {
 		reg = <0>;
-		device_type = "ethernet-phy";
 	};
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+};
+
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/xilinx/zynq-zybo.dts b/arch/arm/boot/dts/xilinx/zynq-zybo.dts
index 755f6f109d5a..fbc7d1b12e94 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zybo.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zybo.dts
@@ -13,6 +13,7 @@
 	aliases {
 		ethernet0 = &gem0;
 		serial0 = &uart1;
+		spi0 = &qspi;
 		mmc0 = &sdhci0;
 	};
 
@@ -44,15 +45,21 @@
 
 	ethernet_phy: ethernet-phy@0 {
 		reg = <0>;
-		device_type = "ethernet-phy";
 	};
 };
 
+&qspi {
+	bootph-all;
+	status = "okay";
+};
+
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 };
 
 &uart1 {
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c
index 9a9aa53547a6..d1e82a318e3b 100644
--- a/arch/arm/common/bL_switcher.c
+++ b/arch/arm/common/bL_switcher.c
@@ -307,13 +307,11 @@ static struct task_struct *bL_switcher_thread_create(int cpu, void *arg)
 {
 	struct task_struct *task;
 
-	task = kthread_create_on_node(bL_switcher_thread, arg,
-				      cpu_to_node(cpu), "kswitcher_%d", cpu);
-	if (!IS_ERR(task)) {
-		kthread_bind(task, cpu);
-		wake_up_process(task);
-	} else
+	task = kthread_run_on_cpu(bL_switcher_thread, arg,
+				  cpu, "kswitcher_%d");
+	if (IS_ERR(task))
 		pr_err("%s failed for CPU %d\n", __func__, cpu);
+
 	return task;
 }
 
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 06b0e5fd54a6..cb6ef449b987 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -516,7 +516,7 @@ static void locomo_remove(struct platform_device *dev)
  */
 static struct platform_driver locomo_device_driver = {
 	.probe		= locomo_probe,
-	.remove_new	= locomo_remove,
+	.remove		= locomo_remove,
 #ifdef CONFIG_PM
 	.suspend	= locomo_suspend,
 	.resume		= locomo_resume,
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 550978dc3c50..04ff75dcc20e 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -416,9 +416,9 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 	writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
 	writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
 
-	sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
-						  &sa1111_irqdomain_ops,
-						  sachip);
+	sachip->irqdomain = irq_domain_create_linear(NULL, SA1111_IRQ_NR,
+						     &sa1111_irqdomain_ops,
+						     sachip);
 	if (!sachip->irqdomain) {
 		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
 		return -ENOMEM;
@@ -563,7 +563,7 @@ static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
 	return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
 }
 
-static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+static int sa1111_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
 {
 	struct sa1111 *sachip = gc_to_sa1111(gc);
 	unsigned long flags;
@@ -574,10 +574,12 @@ static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
 	sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
 	sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
 	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	return 0;
 }
 
-static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
-	unsigned long *bits)
+static int sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+				    unsigned long *bits)
 {
 	struct sa1111 *sachip = gc_to_sa1111(gc);
 	unsigned long flags;
@@ -595,6 +597,8 @@ static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
 	sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
 	sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
 	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	return 0;
 }
 
 static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
@@ -1154,7 +1158,7 @@ static struct dev_pm_ops sa1111_pm_ops = {
  */
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
-	.remove_new	= sa1111_remove,
+	.remove		= sa1111_remove,
 	.driver		= {
 		.name	= "sa1111",
 		.pm	= &sa1111_pm_ops,
@@ -1367,7 +1371,7 @@ static void sa1111_bus_remove(struct device *dev)
 		drv->remove(sadev);
 }
 
-struct bus_type sa1111_bus_type = {
+const struct bus_type sa1111_bus_type = {
 	.name		= "sa1111-rab",
 	.match		= sa1111_match,
 	.probe		= sa1111_bus_probe,
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 9018c7240166..dddb73c96826 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -63,7 +63,8 @@ static void __scoop_gpio_set(struct scoop_dev *sdev,
 	iowrite16(gpwr, sdev->base + SCOOP_GPWR);
 }
 
-static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+static int scoop_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			  int value)
 {
 	struct scoop_dev *sdev = gpiochip_get_data(chip);
 	unsigned long flags;
@@ -73,6 +74,8 @@ static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	__scoop_gpio_set(sdev, offset, value);
 
 	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+
+	return 0;
 }
 
 static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -250,7 +253,7 @@ static void scoop_remove(struct platform_device *pdev)
 
 static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
-	.remove_new	= scoop_remove,
+	.remove		= scoop_remove,
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
 	.driver		= {
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
index 28b724d59e7e..45d8738abb75 100644
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -117,7 +117,6 @@ CONFIG_KEYBOARD_GPIO_POLLED=y
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_RUNTIME_UARTS=6
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
index 61cee1e7ebea..2e6ea13c1e9b 100644
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -138,7 +138,6 @@ CONFIG_SERIO_RAW=y
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_RUNTIME_UARTS=6
@@ -308,7 +307,7 @@ CONFIG_PANIC_ON_OOPS=y
 CONFIG_PANIC_TIMEOUT=-1
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=1
 CONFIG_WQ_WATCHDOG=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_FUNCTION_TRACER=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index f2596a1b2f7d..4f1153098b16 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -181,7 +181,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_AT91=y
 CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_SPI=y
+CONFIG_MMC_SPI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
@@ -232,7 +232,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=y
 CONFIG_CRYPTO_DEV_ATMEL_TDES=y
 CONFIG_CRYPTO_DEV_ATMEL_SHA=y
-CONFIG_CRC_CCITT=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_ACORN_8x8=y
diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig
index 516689dc6cf1..22b189090e15 100644
--- a/arch/arm/configs/axm55xx_defconfig
+++ b/arch/arm/configs/axm55xx_defconfig
@@ -194,8 +194,7 @@ CONFIG_MAILBOX=y
 CONFIG_PL320_MBOX=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_AUTOFS_FS=y
 CONFIG_FUSE_FS=y
@@ -233,4 +232,3 @@ CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_GCM=y
 CONFIG_CRYPTO_SHA256=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index b5f0bd8dd536..4a8ac09843d7 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -7,7 +7,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
@@ -155,8 +154,8 @@ CONFIG_PWM_BCM2835=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 6fa3477e6b02..f66d502ce2ef 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -75,5 +75,4 @@ CONFIG_MINIX_FS=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 42cb1c854118..578c6a4af620 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -78,7 +78,6 @@ CONFIG_ROMFS_FS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_CCITT=y
 CONFIG_FONTS=y
 CONFIG_FONT_MINI_4x6=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 3474e475373a..673408a10888 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -14,7 +14,6 @@ CONFIG_ARCH_MULTIPLATFORM=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -229,7 +228,7 @@ CONFIG_PWM=y
 CONFIG_PWM_TIECAP=m
 CONFIG_PWM_TIEHRPWM=m
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_AUTOFS_FS=m
@@ -249,7 +248,6 @@ CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=m
 CONFIG_DMA_CMA=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_RT_MUTEXES=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 2849d17f5856..e98c35df675e 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -95,8 +95,8 @@ CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
 CONFIG_MV_XOR=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
 CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
@@ -126,10 +126,7 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 7dece9d98828..9f3c7324d1cf 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -103,8 +103,8 @@ CONFIG_RTC_DRV_EP93XX=y
 CONFIG_DMADEVICES=y
 CONFIG_EP93XX_DMA=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
 CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -113,11 +113,9 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_LIBCRC32C=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 7ad48fdda1da..84070e9698e8 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -167,7 +167,7 @@ CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8997=y
 CONFIG_MFD_MAX8998=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_STMPE=y
 CONFIG_STMPE_I2C=y
 CONFIG_MFD_TPS65090=y
@@ -349,7 +349,7 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_USER=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_XTS=m
@@ -363,14 +363,9 @@ CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_DEV_EXYNOS_RNG=y
 CONFIG_CRYPTO_DEV_S5P=y
-CONFIG_CRC_CCITT=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=96
 CONFIG_FONTS=y
diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
index e19c1039fb93..384aade1a48b 100644
--- a/arch/arm/configs/hisi_defconfig
+++ b/arch/arm/configs/hisi_defconfig
@@ -35,7 +35,6 @@ CONFIG_NETDEVICES=y
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_HIP04_ETH=y
 CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0beecdde55f5..0d55056c6f82 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -12,6 +12,7 @@ CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
+CONFIG_KEXEC=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX31=y
@@ -32,7 +33,6 @@ CONFIG_ARM_PSCI=y
 CONFIG_HIGHMEM=y
 CONFIG_ARCH_FORCE_MAX_ORDER=13
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
-CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -68,6 +68,7 @@ CONFIG_BT=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_NXPUART=m
 CONFIG_CFG80211=y
 CONFIG_CFG80211_WEXT=y
@@ -129,7 +130,6 @@ CONFIG_CS89x0_PLATFORM=y
 CONFIG_QCA7000_SPI=m
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
-CONFIG_SMC911X=y
 CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_MICREL_PHY=y
@@ -153,9 +153,7 @@ CONFIG_MWIFIEX_PCIE=m
 CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SDIO=m
-# CONFIG_WILINK_PLATFORM_DATA is not set
 CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_SNVS_PWRKEY=y
 CONFIG_KEYBOARD_IMX=y
@@ -183,6 +181,7 @@ CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MMA8450=y
 CONFIG_INPUT_GPIO_BEEPER=m
+CONFIG_INPUT_PWM_BEEPER=y
 CONFIG_SERIO_SERPORT=m
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_IMX=y
@@ -190,9 +189,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_SERIAL_DEV_BUS=y
-# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_GPIO=y
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_ALGOPCF=m
@@ -204,14 +201,9 @@ CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_FSL_DSPI=y
-CONFIG_PINCTRL_IMX8MM=y
-CONFIG_PINCTRL_IMX8MN=y
-CONFIG_PINCTRL_IMX8MP=y
-CONFIG_PINCTRL_IMX8MQ=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_SIOX=m
-CONFIG_GPIO_VF610=y
 CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
@@ -225,11 +217,11 @@ CONFIG_W1_SLAVE_THERM=m
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_RN5T618_POWER=m
 CONFIG_SENSORS_MC13783_ADC=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_JC42=m
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_PWM_FAN=y
 CONFIG_SENSORS_SY7636A=y
@@ -282,13 +274,13 @@ CONFIG_VIDEO_OV5645=m
 CONFIG_VIDEO_ADV7180=m
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
-CONFIG_DRM_I2C_NXP_TDA998X=y
 CONFIG_DRM_MSM=y
 CONFIG_DRM_PANEL_LVDS=y
-CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
+CONFIG_DRM_PANEL_EDP=y
+CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
+CONFIG_DRM_I2C_NXP_TDA998X=y
 CONFIG_DRM_LVDS_CODEC=m
 CONFIG_DRM_SII902X=y
 CONFIG_DRM_TI_TFP410=y
@@ -309,7 +301,6 @@ CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_GPIO=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -323,6 +314,7 @@ CONFIG_SND_SOC_IMX_SGTL5000=y
 CONFIG_SND_SOC_FSL_ASOC_CARD=y
 CONFIG_SND_SOC_AC97_CODEC=y
 CONFIG_SND_SOC_CS42XX8_I2C=y
+CONFIG_SND_SOC_SPDIF=y
 CONFIG_SND_SOC_TLV320AIC3X_I2C=y
 CONFIG_SND_SOC_WM8960=y
 CONFIG_SND_SOC_WM8962=y
@@ -344,6 +336,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_TEST=m
 CONFIG_USB_EHSET_TEST_FIXTURE=m
+CONFIG_USB_HSIC_USB3503=y
 CONFIG_USB_ONBOARD_DEV=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
@@ -378,11 +371,8 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -446,12 +436,11 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_ISO9660_FS=m
@@ -479,10 +468,6 @@ CONFIG_SECURITYFS=y
 CONFIG_CRYPTO_DEV_FSL_CAAM=y
 CONFIG_CRYPTO_DEV_SAHARA=y
 CONFIG_CRYPTO_DEV_MXS_DCP=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
@@ -492,5 +477,4 @@ CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SCHED_DEBUG is not set
 # CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 3cb995b9616a..81199dddcde7 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -158,8 +158,8 @@ CONFIG_IXP4XX_NPE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_OVERLAY_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index e6ec768f42e2..d57285cfefb2 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -92,4 +92,3 @@ CONFIG_NLS_UTF8=m
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index c1291ca290b2..b0cadd878152 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -228,7 +228,6 @@ CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTR=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_USER_API_HASH=y
 CONFIG_CRYPTO_USER_API_SKCIPHER=y
 CONFIG_DMA_CMA=y
diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
index f55c231e0870..f142a6637ede 100644
--- a/arch/arm/configs/lpc18xx_defconfig
+++ b/arch/arm/configs/lpc18xx_defconfig
@@ -90,7 +90,6 @@ CONFIG_KEYBOARD_GPIO_POLLED=y
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_NONSTANDARD=y
@@ -147,8 +146,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_INOTIFY_USER is not set
 CONFIG_JFFS2_FS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 98e267213b21..2bddb0924a8c 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -177,9 +177,7 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig
index f5eeac9c65c3..a2995eb390c6 100644
--- a/arch/arm/configs/milbeaut_m10v_defconfig
+++ b/arch/arm/configs/milbeaut_m10v_defconfig
@@ -93,24 +93,15 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_KEYS=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_SELFTESTS=y
 # CONFIG_CRYPTO_ECHAINIV is not set
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA1_ARM_CE=m
-CONFIG_CRYPTO_SHA2_ARM_CE=m
-CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_AES_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
-CONFIG_CRYPTO_CRC32_ARM_CE=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_ITU_T=m
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index f6f9e135353e..a9a212abfd69 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -53,7 +53,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX8925=y
 # CONFIG_RESET_CONTROLLER is not set
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_MSDOS_FS=y
@@ -67,7 +67,6 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
@@ -79,4 +78,3 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_MMP_UART3=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig
index 34d079e03b3c..e2d9f3610063 100644
--- a/arch/arm/configs/moxart_defconfig
+++ b/arch/arm/configs/moxart_defconfig
@@ -113,12 +113,11 @@ CONFIG_RTC_DRV_MOXART=y
 CONFIG_DMADEVICES=y
 CONFIG_MOXART_DMA=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_KEYS=y
-CONFIG_CRC32_BIT=y
 CONFIG_DMA_API_DEBUG=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index 27d650635d9b..1a86dc305523 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -91,6 +91,5 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_CRAMFS=y
 CONFIG_MINIX_FS=y
-CONFIG_CRC_CCITT=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 3f4ddcf49ec7..59b020e66a0b 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -12,7 +12,6 @@ CONFIG_MACH_ASPEED_G4=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91SAM9=y
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX25=y
@@ -269,7 +268,7 @@ CONFIG_PWM_ATMEL=m
 CONFIG_PWM_ATMEL_HLCDC_PWM=m
 CONFIG_PWM_ATMEL_TCB=m
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -289,8 +288,6 @@ CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 758276027dbc..7f1fa9dd88c9 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -20,6 +20,7 @@ CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
+CONFIG_SOC_SAMA7D65=y
 CONFIG_SOC_SAMA7G5=y
 CONFIG_SOC_LAN966=y
 CONFIG_ARCH_BCM=y
@@ -86,10 +87,6 @@ CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8916=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_INTEL_SOCFPGA=y
@@ -284,6 +281,8 @@ CONFIG_TI_CPSW_SWITCHDEV=y
 CONFIG_TI_CPTS=y
 CONFIG_TI_KEYSTONE_NETCP=y
 CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
+CONFIG_TI_PRUSS=m
+CONFIG_TI_PRUETH=m
 CONFIG_XILINX_EMACLITE=y
 CONFIG_SFP=m
 CONFIG_BROADCOM_PHY=y
@@ -343,6 +342,7 @@ CONFIG_INPUT_MAX77693_HAPTIC=m
 CONFIG_INPUT_MAX8997_HAPTIC=m
 CONFIG_INPUT_GPIO_DECODER=m
 CONFIG_INPUT_CPCAP_PWRBUTTON=m
+CONFIG_INPUT_TPS65219_PWRBUTTON=m
 CONFIG_INPUT_AXP20X_PEK=m
 CONFIG_INPUT_DA9063_ONKEY=m
 CONFIG_INPUT_ADXL34X=m
@@ -611,12 +611,13 @@ CONFIG_MFD_QCOM_RPM=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK8XX_I2C=y
 CONFIG_MFD_RN5T618=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65218=y
+CONFIG_MFD_TPS65219=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
 CONFIG_MFD_STM32_LPTIMER=m
@@ -666,6 +667,7 @@ CONFIG_REGULATOR_TPS62360=y
 CONFIG_REGULATOR_TPS65090=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65218=y
+CONFIG_REGULATOR_TPS65219=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
@@ -713,10 +715,10 @@ CONFIG_VIDEO_ADV7604_CEC=y
 CONFIG_VIDEO_ML86V7667=m
 CONFIG_IMX_IPUV3_CORE=m
 CONFIG_DRM=y
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_SIL164 is not set
 CONFIG_DRM_I2C_NXP_TDA998X=m
 CONFIG_DRM_NOUVEAU=m
+# CONFIG_DRM_NOUVEAU_CH7006 is not set
+# CONFIG_DRM_NOUVEAU_SIL164 is not set
 CONFIG_DRM_EXYNOS=m
 CONFIG_DRM_EXYNOS_FIMD=y
 CONFIG_DRM_EXYNOS_MIXER=y
@@ -791,7 +793,12 @@ CONFIG_SND_HDA_TEGRA=m
 CONFIG_SND_HDA_INPUT_BEEP=y
 CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_REALTEK_LIB=m
+CONFIG_SND_HDA_CODEC_ALC269=m
 CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_HDA_CODEC_HDMI_GENERIC=m
+CONFIG_SND_HDA_CODEC_HDMI_NVIDIA=m
+CONFIG_SND_HDA_CODEC_HDMI_TEGRA=m
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_ATMEL_SOC=m
@@ -1120,25 +1127,6 @@ CONFIG_QCOM_SMSM=y
 CONFIG_QCOM_SOCINFO=m
 CONFIG_QCOM_STATS=m
 CONFIG_QCOM_WCNSS_CTRL=m
-CONFIG_ARCH_EMEV2=y
-CONFIG_ARCH_R8A7794=y
-CONFIG_ARCH_R8A7779=y
-CONFIG_ARCH_R8A7790=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_ARCH_R8A7793=y
-CONFIG_ARCH_R8A7791=y
-CONFIG_ARCH_R8A7792=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_ARCH_R8A73A4=y
-CONFIG_ARCH_R7S72100=y
-CONFIG_ARCH_R7S9210=y
-CONFIG_ARCH_R8A77470=y
-CONFIG_ARCH_R8A7745=y
-CONFIG_ARCH_R8A7742=y
-CONFIG_ARCH_R8A7743=y
-CONFIG_ARCH_R8A7744=y
-CONFIG_ARCH_R9A06G032=y
-CONFIG_ARCH_SH73A0=y
 CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
@@ -1202,7 +1190,7 @@ CONFIG_PWM_BCM2835=y
 CONFIG_PWM_BRCMSTB=m
 CONFIG_PWM_FSL_FTM=m
 CONFIG_PWM_MESON=m
-CONFIG_PWM_RCAR=m
+CONFIG_PWM_RENESAS_RCAR=m
 CONFIG_PWM_RENESAS_TPU=y
 CONFIG_PWM_ROCKCHIP=m
 CONFIG_PWM_SAMSUNG=m
@@ -1298,15 +1286,9 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA1_ARM_CE=m
-CONFIG_CRYPTO_SHA2_ARM_CE=m
-CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_AES_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
-CONFIG_CRYPTO_CRC32_ARM_CE=m
 CONFIG_CRYPTO_DEV_SUN4I_SS=m
 CONFIG_CRYPTO_DEV_FSL_CAAM=m
 CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
@@ -1318,7 +1300,6 @@ CONFIG_CRYPTO_DEV_MARVELL_CESA=m
 CONFIG_CRYPTO_DEV_QCE=m
 CONFIG_CRYPTO_DEV_QCOM_RNG=m
 CONFIG_CRYPTO_DEV_ROCKCHIP=m
-CONFIG_CRYPTO_DEV_STM32_CRC=m
 CONFIG_CRYPTO_DEV_STM32_HASH=m
 CONFIG_CRYPTO_DEV_STM32_CRYP=m
 CONFIG_CMA_SIZE_MBYTES=64
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 3343f72de7ea..d3a26efe766c 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -91,8 +91,8 @@ CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_RS5C372=y
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
 CONFIG_EXT4_FS=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
@@ -121,4 +121,3 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHEDSTATS=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index 2467afd32146..d1742a7cae6a 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -168,7 +168,7 @@ CONFIG_MV_XOR=y
 CONFIG_STAGING=y
 CONFIG_FB_XGI=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -187,8 +187,6 @@ CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 43bc1255a5db..603fb003b223 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -32,9 +32,6 @@ CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=m
@@ -45,7 +42,6 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
@@ -60,7 +56,6 @@ CONFIG_ENC28J60=y
 CONFIG_ICPLUS_PHY=y
 CONFIG_MICREL_PHY=y
 CONFIG_REALTEK_PHY=y
-CONFIG_SMSC_PHY=y
 CONFIG_CAN_FLEXCAN=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
@@ -69,21 +64,22 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
 CONFIG_TOUCHSCREEN_MXS_LRADC=y
 CONFIG_TOUCHSCREEN_TSC2007=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PWM_BEEPER=y
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_MXS_AUART=y
 # CONFIG_HW_RANDOM is not set
-# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MXS=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_MXS=y
-CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_STMP3XXX_RTC_WATCHDOG=y
@@ -104,6 +100,8 @@ CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_MXS_SOC=y
 CONFIG_SND_SOC_MXS_SGTL5000=y
+CONFIG_SND_SOC_TLV320AIC3X_I2C=y
+CONFIG_SND_SIMPLE_CARD=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
@@ -138,10 +136,6 @@ CONFIG_PWM_MXS=y
 CONFIG_NVMEM_MXS_OCOTP=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
-CONFIG_NETFS_SUPPORT=m
-CONFIG_FSCACHE=y
-CONFIG_FSCACHE_STATS=y
-CONFIG_CACHEFILES=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -160,8 +154,6 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_CRYPTO_DEV_MXS_DCP=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC7=m
 CONFIG_FONTS=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index ea28ed8991b4..696b4fbc2412 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -116,7 +116,7 @@ CONFIG_IIO_ST_ACCEL_3AXIS=y
 CONFIG_PWM=y
 CONFIG_PWM_STMPE=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 025b595dd837..dee820474f44 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -184,7 +184,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_OMAP=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_ISO9660_FS=y
@@ -220,8 +220,6 @@ CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_LIBCRC32C=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 3a166c2f02bd..4e53c331cd84 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -13,7 +13,6 @@ CONFIG_MEMCG=y
 CONFIG_BLK_CGROUP=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
@@ -143,7 +142,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -386,6 +384,7 @@ CONFIG_TOUCHSCREEN_TSC2007=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_CPCAP_PWRBUTTON=m
 CONFIG_INPUT_TPS65218_PWRBUTTON=m
+CONFIG_INPUT_TPS65219_PWRBUTTON=m
 CONFIG_INPUT_TWL4030_PWRBUTTON=m
 CONFIG_INPUT_UINPUT=m
 CONFIG_INPUT_PALMAS_PWRBUTTON=m
@@ -428,6 +427,7 @@ CONFIG_POWER_RESET_GPIO=y
 CONFIG_BATTERY_BQ27XXX=m
 CONFIG_CHARGER_ISP1704=m
 CONFIG_CHARGER_TWL4030=m
+CONFIG_CHARGER_TWL6030=m
 CONFIG_CHARGER_BQ2415X=m
 CONFIG_CHARGER_BQ24190=m
 CONFIG_CHARGER_BQ24735=m
@@ -454,6 +454,7 @@ CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TI_LP873X=y
 CONFIG_MFD_TI_LP87565=y
 CONFIG_MFD_TPS65218=y
+CONFIG_MFD_TPS65219=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
 CONFIG_REGULATOR_CPCAP=y
@@ -470,6 +471,7 @@ CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65218=y
+CONFIG_REGULATOR_TPS65219=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_RC_CORE=m
@@ -608,6 +610,7 @@ CONFIG_LEDS_LP5523=m
 CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_PWM=m
 CONFIG_LEDS_BD2606MVV=m
+CONFIG_LEDS_TCA6507=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
@@ -642,6 +645,8 @@ CONFIG_TI_EMIF_SRAM=m
 CONFIG_IIO=m
 CONFIG_IIO_SW_DEVICE=m
 CONFIG_IIO_SW_TRIGGER=m
+CONFIG_BMA180=m
+CONFIG_BMC150_ACCEL=m
 CONFIG_IIO_ST_ACCEL_3AXIS=m
 CONFIG_KXCJK1013=m
 CONFIG_CPCAP_ADC=m
@@ -649,10 +654,15 @@ CONFIG_INA2XX_ADC=m
 CONFIG_TI_AM335X_ADC=m
 CONFIG_TWL4030_MADC=m
 CONFIG_TWL6030_GPADC=m
+CONFIG_BMG160=m
 CONFIG_MPU3050_I2C=m
+CONFIG_ITG3200=m
+CONFIG_BOSCH_BNO055_I2C=m
 CONFIG_INV_MPU6050_I2C=m
 CONFIG_SENSORS_ISL29028=m
 CONFIG_AK8975=m
+CONFIG_BMC150_MAGN_I2C=m
+CONFIG_SENSORS_HMC5843_I2C=m
 CONFIG_BMP280=m
 CONFIG_PWM=y
 CONFIG_PWM_OMAP_DMTIMER=m
@@ -669,7 +679,7 @@ CONFIG_TWL4030_USB=m
 CONFIG_COUNTER=m
 CONFIG_TI_EQEP=m
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_SECURITY=y
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
@@ -696,21 +706,12 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_GHASH_ARM_CE=m
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_DEV_OMAP=m
 CONFIG_CRYPTO_DEV_OMAP_SHAM=m
 CONFIG_CRYPTO_DEV_OMAP_AES=m
 CONFIG_CRYPTO_DEV_OMAP_DES=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
 CONFIG_DMA_CMA=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 0629b088a584..002c9145026b 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -115,8 +115,8 @@ CONFIG_RTC_DRV_M48T86=y
 CONFIG_DMADEVICES=y
 CONFIG_MV_XOR=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
 CONFIG_EXT4_FS=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
@@ -136,7 +136,6 @@ CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_T10DIF=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
@@ -146,4 +145,3 @@ CONFIG_LATENCYTOP=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index ce10fe2104bf..8cbca84fe33a 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -41,7 +41,6 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
@@ -49,4 +48,3 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index 381356faf382..07d422f0ff34 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -106,5 +106,4 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 1f28aea86014..71ed0d73f8a9 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -50,7 +50,6 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
@@ -60,4 +59,3 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_MMP_UART2=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 38916ac4bce4..3ea189f1f42f 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -335,7 +335,7 @@ CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8907=m
 CONFIG_EZX_PCAP=y
 CONFIG_UCB1400_CORE=m
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
@@ -498,7 +498,6 @@ CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
 CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_GPIO_VBUS=m
 CONFIG_USB_ISP1301=m
 CONFIG_USB_GADGET=m
@@ -580,9 +579,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_XFS_FS=m
 CONFIG_AUTOFS_FS=m
 CONFIG_FUSE_FS=m
@@ -636,10 +635,9 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
 CONFIG_TIMER_STATS=y
 CONFIG_SECURITY=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
@@ -652,7 +650,6 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
@@ -660,12 +657,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_SHA1_ARM=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=m
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index ec52ccece0ca..29a1dea500f0 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -10,9 +10,6 @@ CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_MDM9615=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
@@ -187,7 +184,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_OTG=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_ACM=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_CHIPIDEA=y
@@ -295,7 +291,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8974=m
 CONFIG_INTERCONNECT_QCOM_SDX55=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index 24f1fa868230..46df453e224e 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -77,7 +77,7 @@ CONFIG_SOUND_VIDC=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8583=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_AUTOFS_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index a37e6ac40825..7bf28a83946a 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -11,7 +11,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_EEPROM_AT24=y
@@ -53,9 +52,9 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_PWM=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CRAMFS=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index 5dbe85c263de..02121eec3658 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -113,7 +113,6 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
-CONFIG_CRC_CCITT=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index e447329398d5..2cad045e1d8d 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -95,6 +95,7 @@ CONFIG_LIBERTAS_THINFIRM_USB=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
 CONFIG_MWIFIEX_USB=m
+CONFIG_WILC1000_SDIO=m
 CONFIG_RT2X00=m
 CONFIG_RT2500USB=m
 CONFIG_RT73USB=m
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index 1a2e93c8ee71..e2ad9a05566f 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -12,6 +12,7 @@ CONFIG_EXPERT=y
 # CONFIG_IO_URING is not set
 CONFIG_KALLSYMS_ALL=y
 CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAMA7D65=y
 CONFIG_SOC_SAMA7G5=y
 CONFIG_ATMEL_CLOCKSOURCE_TCB=y
 # CONFIG_CACHE_L2X0 is not set
@@ -200,7 +201,7 @@ CONFIG_MCHP_EIC=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_NVMEM_MICROCHIP_OTPC=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_VFAT_FS=y
@@ -226,8 +227,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=y
 CONFIG_CRYPTO_DEV_ATMEL_TDES=y
 CONFIG_CRYPTO_DEV_ATMEL_SHA=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_CMA_ALIGNMENT=9
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 0e380e450a62..0085921833c3 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -10,10 +10,10 @@ CONFIG_KEXEC=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_PL310_ERRATA_588369=y
 CONFIG_SMP=y
-CONFIG_SCHED_MC=y
 CONFIG_NR_CPUS=8
 CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
@@ -23,6 +23,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+# CONFIG_SCHED_SMT is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_SLAB_FREELIST_HARDENED=y
 CONFIG_CMA=y
@@ -57,11 +58,13 @@ CONFIG_SH_ETH=y
 CONFIG_RAVB=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
+# CONFIG_DWMAC_RENESAS_GBETH is not set
 CONFIG_MICREL_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_CAN_RCAR=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_EDT_FT5X06=y
@@ -72,7 +75,6 @@ CONFIG_INPUT_DA9063_ONKEY=y
 CONFIG_INPUT_ADXL34X=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 # CONFIG_SERIAL_8250_16550A_VARIANTS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
@@ -83,6 +85,7 @@ CONFIG_SERIAL_8250_EM=y
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DEMUX_PINCTRL=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_EMEV2=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_RIIC=y
@@ -103,7 +106,7 @@ CONFIG_GPIO_PCF857X=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_RMOBILE=y
 CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_LM75=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_RCAR_THERMAL=y
@@ -173,6 +176,9 @@ CONFIG_USB_RENESAS_USBHS_UDC=y
 CONFIG_USB_RENESAS_USBF=y
 CONFIG_USB_ETH=y
 CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_SH_MMCIF=y
 CONFIG_NEW_LEDS=y
@@ -192,30 +198,13 @@ CONFIG_DW_DMAC=y
 CONFIG_RZN1_DMAMUX=y
 CONFIG_RCAR_DMAC=y
 CONFIG_RENESAS_USB_DMAC=y
+CONFIG_RZ_DMAC=y
+CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_ARCH_EMEV2=y
-CONFIG_ARCH_R8A7794=y
-CONFIG_ARCH_R8A7779=y
-CONFIG_ARCH_R8A7790=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_ARCH_R8A7793=y
-CONFIG_ARCH_R8A7791=y
-CONFIG_ARCH_R8A7792=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_ARCH_R8A73A4=y
-CONFIG_ARCH_R7S72100=y
-CONFIG_ARCH_R7S9210=y
-CONFIG_ARCH_R8A77470=y
-CONFIG_ARCH_R8A7745=y
-CONFIG_ARCH_R8A7742=y
-CONFIG_ARCH_R8A7743=y
-CONFIG_ARCH_R8A7744=y
-CONFIG_ARCH_R9A06G032=y
-CONFIG_ARCH_SH73A0=y
 CONFIG_IIO=y
 CONFIG_AK8975=y
 CONFIG_PWM=y
-CONFIG_PWM_RCAR=y
+CONFIG_PWM_RENESAS_RCAR=y
 CONFIG_PWM_RENESAS_TPU=y
 CONFIG_PHY_RCAR_GEN2=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
@@ -229,6 +218,7 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFS_V4_1=y
 CONFIG_ROOT_NFS=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_DMA_CMA=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 294906c8f16e..f2e42846b116 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -136,7 +136,7 @@ CONFIG_FPGA_REGION=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_AUTOFS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
index a8f992fdb30d..8b19af1ea67c 100644
--- a/arch/arm/configs/spear13xx_defconfig
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -84,8 +84,8 @@ CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_FUSE_FS=y
 CONFIG_MSDOS_FS=m
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index 8dc5a388759c..b4e4b96a98af 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -67,8 +67,8 @@ CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index 4e9e1a6ff381..7083b1bd8573 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -53,8 +53,8 @@ CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 294d16ddeb18..c130af6d44d4 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -193,8 +193,8 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -215,7 +215,7 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_AES=m
@@ -228,14 +228,11 @@ CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=m
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 3baec075d1ef..82190b155b14 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -6,23 +6,25 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
+# CONFIG_POSIX_TIMERS is not set
 CONFIG_BASE_SMALL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IO_URING is not set
+# CONFIG_ADVISE_SYSCALLS is not set
 # CONFIG_MMU is not set
 CONFIG_ARCH_STM32=y
 CONFIG_CPU_V7M_NUM_IRQ=240
 CONFIG_SET_MEM_PARAM=y
 CONFIG_DRAM_BASE=0x90000000
-CONFIG_FLASH_MEM_BASE=0x08000000
-CONFIG_FLASH_SIZE=0x00200000
 # CONFIG_ATAGS is not set
 CONFIG_XIP_KERNEL=y
 CONFIG_XIP_PHYS_ADDR=0x08008000
+# CONFIG_SUSPEND is not set
+# CONFIG_GCC_PLUGINS is not set
 CONFIG_BINFMT_FLAT=y
 # CONFIG_COREDUMP is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -63,21 +65,17 @@ CONFIG_DMADEVICES=y
 CONFIG_STM32_DMA=y
 CONFIG_STM32_DMAMUX=y
 CONFIG_STM32_MDMA=y
+# CONFIG_COMMON_CLK_STM32MP is not set
 CONFIG_IIO=y
 CONFIG_STM32_ADC_CORE=y
 CONFIG_STM32_ADC=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 CONFIG_NLS=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
 CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_CRYPTO=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index d2a094ad360c..ce70ff07c978 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -6,7 +6,6 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_DEBUG=y
@@ -226,7 +225,12 @@ CONFIG_SND_HDA_TEGRA=y
 CONFIG_SND_HDA_INPUT_BEEP=y
 CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_REALTEK_LIB=y
+CONFIG_SND_HDA_CODEC_ALC269=y
 CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_HDMI_GENERIC=y
+CONFIG_SND_HDA_CODEC_HDMI_NVIDIA=y
+CONFIG_SND_HDA_CODEC_HDMI_TEGRA=y
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
@@ -311,13 +315,9 @@ CONFIG_AK8975=y
 CONFIG_PWM=y
 CONFIG_PWM_TEGRA=y
 CONFIG_PHY_TEGRA_XUSB=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 0f55815eecb3..e88533b78327 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -40,7 +40,7 @@ CONFIG_MAC80211_LEDS=y
 CONFIG_CAIF=y
 CONFIG_NFC=m
 CONFIG_NFC_HCI=m
-CONFIG_NFC_SHDLC=m
+CONFIG_NFC_SHDLC=y
 CONFIG_NFC_PN544_I2C=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -175,7 +175,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index cdb6065e04fd..b9454f6954f8 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -120,7 +120,7 @@ CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
diff --git a/arch/arm/configs/wpcm450_defconfig b/arch/arm/configs/wpcm450_defconfig
index 45483deab034..cd4b3e70ff68 100644
--- a/arch/arm/configs/wpcm450_defconfig
+++ b/arch/arm/configs/wpcm450_defconfig
@@ -191,9 +191,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
 CONFIG_X509_CERTIFICATE_PARSER=y
 CONFIG_PKCS7_MESSAGE_PARSER=y
 CONFIG_SYSTEM_TRUSTED_KEYRING=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=m
-CONFIG_LIBCRC32C=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig
index 5ff49a5e9afc..f30d743df264 100644
--- a/arch/arm/crypto/Kconfig
+++ b/arch/arm/crypto/Kconfig
@@ -2,17 +2,6 @@
 
 menu "Accelerated Cryptographic Algorithms for CPU (arm)"
 
-config CRYPTO_CURVE25519_NEON
-	tristate "Public key crypto: Curve25519 (NEON)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_LIB_CURVE25519_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
-	help
-	  Curve25519 algorithm
-
-	  Architecture: arm with
-	  - NEON (Advanced SIMD) extensions
-
 config CRYPTO_GHASH_ARM_CE
 	tristate "Hash functions: GHASH (PMULL/NEON/ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
@@ -44,107 +33,6 @@ config CRYPTO_NHPOLY1305_NEON
 	  Architecture: arm using:
 	  - NEON (Advanced SIMD) extensions
 
-config CRYPTO_POLY1305_ARM
-	tristate "Hash functions: Poly1305 (NEON)"
-	select CRYPTO_HASH
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-	help
-	  Poly1305 authenticator algorithm (RFC7539)
-
-	  Architecture: arm optionally using
-	  - NEON (Advanced SIMD) extensions
-
-config CRYPTO_BLAKE2S_ARM
-	bool "Hash functions: BLAKE2s"
-	select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
-	help
-	  BLAKE2s cryptographic hash function (RFC 7693)
-
-	  Architecture: arm
-
-	  This is faster than the generic implementations of BLAKE2s and
-	  BLAKE2b, but slower than the NEON implementation of BLAKE2b.
-	  There is no NEON implementation of BLAKE2s, since NEON doesn't
-	  really help with it.
-
-config CRYPTO_BLAKE2B_NEON
-	tristate "Hash functions: BLAKE2b (NEON)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_BLAKE2B
-	help
-	  BLAKE2b cryptographic hash function (RFC 7693)
-
-	  Architecture: arm using
-	  - NEON (Advanced SIMD) extensions
-
-	  BLAKE2b digest algorithm optimized with ARM NEON instructions.
-	  On ARM processors that have NEON support but not the ARMv8
-	  Crypto Extensions, typically this BLAKE2b implementation is
-	  much faster than the SHA-2 family and slightly faster than
-	  SHA-1.
-
-config CRYPTO_SHA1_ARM
-	tristate "Hash functions: SHA-1"
-	select CRYPTO_SHA1
-	select CRYPTO_HASH
-	help
-	  SHA-1 secure hash algorithm (FIPS 180)
-
-	  Architecture: arm
-
-config CRYPTO_SHA1_ARM_NEON
-	tristate "Hash functions: SHA-1 (NEON)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_SHA1_ARM
-	select CRYPTO_SHA1
-	select CRYPTO_HASH
-	help
-	  SHA-1 secure hash algorithm (FIPS 180)
-
-	  Architecture: arm using
-	  - NEON (Advanced SIMD) extensions
-
-config CRYPTO_SHA1_ARM_CE
-	tristate "Hash functions: SHA-1 (ARMv8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_SHA1_ARM
-	select CRYPTO_HASH
-	help
-	  SHA-1 secure hash algorithm (FIPS 180)
-
-	  Architecture: arm using ARMv8 Crypto Extensions
-
-config CRYPTO_SHA2_ARM_CE
-	tristate "Hash functions: SHA-224 and SHA-256 (ARMv8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_SHA256_ARM
-	select CRYPTO_HASH
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm using
-	  - ARMv8 Crypto Extensions
-
-config CRYPTO_SHA256_ARM
-	tristate "Hash functions: SHA-224 and SHA-256 (NEON)"
-	select CRYPTO_HASH
-	depends on !CPU_V7M
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm using
-	  - NEON (Advanced SIMD) extensions
-
-config CRYPTO_SHA512_ARM
-	tristate "Hash functions: SHA-384 and SHA-512 (NEON)"
-	select CRYPTO_HASH
-	depends on !CPU_V7M
-	help
-	  SHA-384 and SHA-512 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm using
-	  - NEON (Advanced SIMD) extensions
-
 config CRYPTO_AES_ARM
 	tristate "Ciphers: AES"
 	select CRYPTO_ALGAPI
@@ -169,7 +57,6 @@ config CRYPTO_AES_ARM_BS
 	select CRYPTO_AES_ARM
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
-	select CRYPTO_SIMD
 	help
 	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
 	  with block cipher modes:
@@ -197,7 +84,6 @@ config CRYPTO_AES_ARM_CE
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
-	select CRYPTO_SIMD
 	help
 	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
 	   with block cipher modes:
@@ -211,41 +97,5 @@ config CRYPTO_AES_ARM_CE
 	  Architecture: arm using:
 	  - ARMv8 Crypto Extensions
 
-config CRYPTO_CHACHA20_NEON
-	tristate "Ciphers: ChaCha20, XChaCha20, XChaCha12 (NEON)"
-	select CRYPTO_SKCIPHER
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-	help
-	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
-	  stream cipher algorithms
-
-	  Architecture: arm using:
-	  - NEON (Advanced SIMD) extensions
-
-config CRYPTO_CRC32_ARM_CE
-	tristate "CRC32C and CRC32"
-	depends on KERNEL_MODE_NEON
-	depends on CRC32
-	select CRYPTO_HASH
-	help
-	  CRC32c CRC algorithm with the iSCSI polynomial (RFC 3385 and RFC 3720)
-	  and CRC32 CRC algorithm (IEEE 802.3)
-
-	  Architecture: arm using:
-	  - CRC and/or PMULL instructions
-
-	  Drivers: crc32-arm-ce and crc32c-arm-ce
-
-config CRYPTO_CRCT10DIF_ARM_CE
-	tristate "CRCT10DIF"
-	depends on KERNEL_MODE_NEON
-	depends on CRC_T10DIF
-	select CRYPTO_HASH
-	help
-	  CRC16 CRC algorithm used for the T10 (SCSI) Data Integrity Field (DIF)
-
-	  Architecture: arm using:
-	  - PMULL (Polynomial Multiply Long) instructions
-
 endmenu
 
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
index 13e62c7c25dc..86dd43313dbf 100644
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -5,60 +5,13 @@
 
 obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o
 obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o
-obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
-obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
-obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
-obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
-obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += libblake2s-arm.o
-obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o
-obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
-obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
 obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
-obj-$(CONFIG_CRYPTO_CURVE25519_NEON) += curve25519-neon.o
 
 obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o
-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o
-obj-$(CONFIG_CRYPTO_SHA2_ARM_CE) += sha2-arm-ce.o
 obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o
-obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM_CE) += crct10dif-arm-ce.o
-obj-$(CONFIG_CRYPTO_CRC32_ARM_CE) += crc32-arm-ce.o
 
 aes-arm-y	:= aes-cipher-core.o aes-cipher-glue.o
 aes-arm-bs-y	:= aes-neonbs-core.o aes-neonbs-glue.o
-sha1-arm-y	:= sha1-armv4-large.o sha1_glue.o
-sha1-arm-neon-y	:= sha1-armv7-neon.o sha1_neon_glue.o
-sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o
-sha256-arm-y	:= sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
-sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
-sha512-arm-y	:= sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
-libblake2s-arm-y:= blake2s-core.o blake2s-glue.o
-blake2b-neon-y  := blake2b-neon-core.o blake2b-neon-glue.o
-sha1-arm-ce-y	:= sha1-ce-core.o sha1-ce-glue.o
-sha2-arm-ce-y	:= sha2-ce-core.o sha2-ce-glue.o
 aes-arm-ce-y	:= aes-ce-core.o aes-ce-glue.o
 ghash-arm-ce-y	:= ghash-ce-core.o ghash-ce-glue.o
-crct10dif-arm-ce-y	:= crct10dif-ce-core.o crct10dif-ce-glue.o
-crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o
-chacha-neon-y := chacha-scalar-core.o chacha-glue.o
-chacha-neon-$(CONFIG_KERNEL_MODE_NEON) += chacha-neon-core.o
-poly1305-arm-y := poly1305-core.o poly1305-glue.o
 nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
-curve25519-neon-y := curve25519-core.o curve25519-glue.o
-
-quiet_cmd_perl = PERL    $@
-      cmd_perl = $(PERL) $(<) > $(@)
-
-$(obj)/%-core.S: $(src)/%-armv4.pl
-	$(call cmd,perl)
-
-clean-files += poly1305-core.S sha256-core.S sha512-core.S
-
-aflags-thumb2-$(CONFIG_THUMB2_KERNEL)  := -U__thumb2__ -D__thumb2__=1
-
-AFLAGS_sha256-core.o += $(aflags-thumb2-y)
-AFLAGS_sha512-core.o += $(aflags-thumb2-y)
-
-# massage the perlasm code a bit so we only get the NEON routine if we need it
-poly1305-aflags-$(CONFIG_CPU_V7) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=5
-poly1305-aflags-$(CONFIG_KERNEL_MODE_NEON) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=7
-AFLAGS_poly1305-core.o += $(poly1305-aflags-y) $(aflags-thumb2-y)
diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c
index 21df5e7f51f9..00591895d540 100644
--- a/arch/arm/crypto/aes-ce-glue.c
+++ b/arch/arm/crypto/aes-ce-glue.c
@@ -10,8 +10,6 @@
 #include <asm/simd.h>
 #include <linux/unaligned.h>
 #include <crypto/aes.h>
-#include <crypto/ctr.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
 #include <linux/cpufeature.h>
@@ -399,9 +397,9 @@ static int ctr_encrypt(struct skcipher_request *req)
 	}
 	if (walk.nbytes) {
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];
+		const u8 *tsrc = walk.src.virt.addr;
 		unsigned int nbytes = walk.nbytes;
 		u8 *tdst = walk.dst.virt.addr;
-		u8 *tsrc = walk.src.virt.addr;
 
 		/*
 		 * Tell aes_ctr_encrypt() to process a tail block.
@@ -418,29 +416,6 @@ static int ctr_encrypt(struct skcipher_request *req)
 	return err;
 }
 
-static void ctr_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst)
-{
-	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
-	unsigned long flags;
-
-	/*
-	 * Temporarily disable interrupts to avoid races where
-	 * cachelines are evicted when the CPU is interrupted
-	 * to do something else.
-	 */
-	local_irq_save(flags);
-	aes_encrypt(ctx, dst, src);
-	local_irq_restore(flags);
-}
-
-static int ctr_encrypt_sync(struct skcipher_request *req)
-{
-	if (!crypto_simd_usable())
-		return crypto_ctr_encrypt_walk(req, ctr_encrypt_one);
-
-	return ctr_encrypt(req);
-}
-
 static int xts_encrypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -586,10 +561,9 @@ static int xts_decrypt(struct skcipher_request *req)
 }
 
 static struct skcipher_alg aes_algs[] = { {
-	.base.cra_name		= "__ecb(aes)",
-	.base.cra_driver_name	= "__ecb-aes-ce",
+	.base.cra_name		= "ecb(aes)",
+	.base.cra_driver_name	= "ecb-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -600,10 +574,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ecb_encrypt,
 	.decrypt		= ecb_decrypt,
 }, {
-	.base.cra_name		= "__cbc(aes)",
-	.base.cra_driver_name	= "__cbc-aes-ce",
+	.base.cra_name		= "cbc(aes)",
+	.base.cra_driver_name	= "cbc-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -615,10 +588,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= cbc_encrypt,
 	.decrypt		= cbc_decrypt,
 }, {
-	.base.cra_name		= "__cts(cbc(aes))",
-	.base.cra_driver_name	= "__cts-cbc-aes-ce",
+	.base.cra_name		= "cts(cbc(aes))",
+	.base.cra_driver_name	= "cts-cbc-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -631,10 +603,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= cts_cbc_encrypt,
 	.decrypt		= cts_cbc_decrypt,
 }, {
-	.base.cra_name		= "__ctr(aes)",
-	.base.cra_driver_name	= "__ctr-aes-ce",
+	.base.cra_name		= "ctr(aes)",
+	.base.cra_driver_name	= "ctr-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= 1,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -647,25 +618,9 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ctr_encrypt,
 	.decrypt		= ctr_encrypt,
 }, {
-	.base.cra_name		= "ctr(aes)",
-	.base.cra_driver_name	= "ctr-aes-ce-sync",
-	.base.cra_priority	= 300 - 1,
-	.base.cra_blocksize	= 1,
-	.base.cra_ctxsize	= sizeof(struct crypto_aes_ctx),
-	.base.cra_module	= THIS_MODULE,
-
-	.min_keysize		= AES_MIN_KEY_SIZE,
-	.max_keysize		= AES_MAX_KEY_SIZE,
-	.ivsize			= AES_BLOCK_SIZE,
-	.chunksize		= AES_BLOCK_SIZE,
-	.setkey			= ce_aes_setkey,
-	.encrypt		= ctr_encrypt_sync,
-	.decrypt		= ctr_encrypt_sync,
-}, {
-	.base.cra_name		= "__xts(aes)",
-	.base.cra_driver_name	= "__xts-aes-ce",
+	.base.cra_name		= "xts(aes)",
+	.base.cra_driver_name	= "xts-aes-ce",
 	.base.cra_priority	= 300,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct crypto_aes_xts_ctx),
 	.base.cra_module	= THIS_MODULE,
@@ -679,51 +634,14 @@ static struct skcipher_alg aes_algs[] = { {
 	.decrypt		= xts_decrypt,
 } };
 
-static struct simd_skcipher_alg *aes_simd_algs[ARRAY_SIZE(aes_algs)];
-
 static void aes_exit(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(aes_simd_algs) && aes_simd_algs[i]; i++)
-		simd_skcipher_free(aes_simd_algs[i]);
-
 	crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
 static int __init aes_init(void)
 {
-	struct simd_skcipher_alg *simd;
-	const char *basename;
-	const char *algname;
-	const char *drvname;
-	int err;
-	int i;
-
-	err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
-	if (err)
-		return err;
-
-	for (i = 0; i < ARRAY_SIZE(aes_algs); i++) {
-		if (!(aes_algs[i].base.cra_flags & CRYPTO_ALG_INTERNAL))
-			continue;
-
-		algname = aes_algs[i].base.cra_name + 2;
-		drvname = aes_algs[i].base.cra_driver_name + 2;
-		basename = aes_algs[i].base.cra_driver_name;
-		simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename);
-		err = PTR_ERR(simd);
-		if (IS_ERR(simd))
-			goto unregister_simds;
-
-		aes_simd_algs[i] = simd;
-	}
-
-	return 0;
-
-unregister_simds:
-	aes_exit();
-	return err;
+	return crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
 module_cpu_feature_match(AES, aes_init);
diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c
index f6be80b5938b..df5afe601e4a 100644
--- a/arch/arm/crypto/aes-neonbs-glue.c
+++ b/arch/arm/crypto/aes-neonbs-glue.c
@@ -8,8 +8,6 @@
 #include <asm/neon.h>
 #include <asm/simd.h>
 #include <crypto/aes.h>
-#include <crypto/ctr.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
 #include <crypto/xts.h>
@@ -59,11 +57,6 @@ struct aesbs_xts_ctx {
 	struct crypto_aes_ctx	tweak_key;
 };
 
-struct aesbs_ctr_ctx {
-	struct aesbs_ctx	key;		/* must be first member */
-	struct crypto_aes_ctx	fallback;
-};
-
 static int aesbs_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 			unsigned int key_len)
 {
@@ -200,25 +193,6 @@ static int cbc_decrypt(struct skcipher_request *req)
 	return err;
 }
 
-static int aesbs_ctr_setkey_sync(struct crypto_skcipher *tfm, const u8 *in_key,
-				 unsigned int key_len)
-{
-	struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
-	int err;
-
-	err = aes_expandkey(&ctx->fallback, in_key, key_len);
-	if (err)
-		return err;
-
-	ctx->key.rounds = 6 + key_len / 4;
-
-	kernel_neon_begin();
-	aesbs_convert_key(ctx->key.rk, ctx->fallback.key_enc, ctx->key.rounds);
-	kernel_neon_end();
-
-	return 0;
-}
-
 static int ctr_encrypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -232,7 +206,7 @@ static int ctr_encrypt(struct skcipher_request *req)
 	while (walk.nbytes > 0) {
 		const u8 *src = walk.src.virt.addr;
 		u8 *dst = walk.dst.virt.addr;
-		int bytes = walk.nbytes;
+		unsigned int bytes = walk.nbytes;
 
 		if (unlikely(bytes < AES_BLOCK_SIZE))
 			src = dst = memcpy(buf + sizeof(buf) - bytes,
@@ -254,21 +228,6 @@ static int ctr_encrypt(struct skcipher_request *req)
 	return err;
 }
 
-static void ctr_encrypt_one(struct crypto_skcipher *tfm, const u8 *src, u8 *dst)
-{
-	struct aesbs_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	__aes_arm_encrypt(ctx->fallback.key_enc, ctx->key.rounds, src, dst);
-}
-
-static int ctr_encrypt_sync(struct skcipher_request *req)
-{
-	if (!crypto_simd_usable())
-		return crypto_ctr_encrypt_walk(req, ctr_encrypt_one);
-
-	return ctr_encrypt(req);
-}
-
 static int aesbs_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 			    unsigned int key_len)
 {
@@ -374,13 +333,12 @@ static int xts_decrypt(struct skcipher_request *req)
 }
 
 static struct skcipher_alg aes_algs[] = { {
-	.base.cra_name		= "__ecb(aes)",
-	.base.cra_driver_name	= "__ecb-aes-neonbs",
+	.base.cra_name		= "ecb(aes)",
+	.base.cra_driver_name	= "ecb-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct aesbs_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
@@ -389,13 +347,12 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ecb_encrypt,
 	.decrypt		= ecb_decrypt,
 }, {
-	.base.cra_name		= "__cbc(aes)",
-	.base.cra_driver_name	= "__cbc-aes-neonbs",
+	.base.cra_name		= "cbc(aes)",
+	.base.cra_driver_name	= "cbc-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct aesbs_cbc_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
@@ -405,13 +362,12 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= cbc_encrypt,
 	.decrypt		= cbc_decrypt,
 }, {
-	.base.cra_name		= "__ctr(aes)",
-	.base.cra_driver_name	= "__ctr-aes-neonbs",
+	.base.cra_name		= "ctr(aes)",
+	.base.cra_driver_name	= "ctr-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= 1,
 	.base.cra_ctxsize	= sizeof(struct aesbs_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
@@ -422,29 +378,12 @@ static struct skcipher_alg aes_algs[] = { {
 	.encrypt		= ctr_encrypt,
 	.decrypt		= ctr_encrypt,
 }, {
-	.base.cra_name		= "ctr(aes)",
-	.base.cra_driver_name	= "ctr-aes-neonbs-sync",
-	.base.cra_priority	= 250 - 1,
-	.base.cra_blocksize	= 1,
-	.base.cra_ctxsize	= sizeof(struct aesbs_ctr_ctx),
-	.base.cra_module	= THIS_MODULE,
-
-	.min_keysize		= AES_MIN_KEY_SIZE,
-	.max_keysize		= AES_MAX_KEY_SIZE,
-	.chunksize		= AES_BLOCK_SIZE,
-	.walksize		= 8 * AES_BLOCK_SIZE,
-	.ivsize			= AES_BLOCK_SIZE,
-	.setkey			= aesbs_ctr_setkey_sync,
-	.encrypt		= ctr_encrypt_sync,
-	.decrypt		= ctr_encrypt_sync,
-}, {
-	.base.cra_name		= "__xts(aes)",
-	.base.cra_driver_name	= "__xts-aes-neonbs",
+	.base.cra_name		= "xts(aes)",
+	.base.cra_driver_name	= "xts-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct aesbs_xts_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
 
 	.min_keysize		= 2 * AES_MIN_KEY_SIZE,
 	.max_keysize		= 2 * AES_MAX_KEY_SIZE,
@@ -455,55 +394,18 @@ static struct skcipher_alg aes_algs[] = { {
 	.decrypt		= xts_decrypt,
 } };
 
-static struct simd_skcipher_alg *aes_simd_algs[ARRAY_SIZE(aes_algs)];
-
 static void aes_exit(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(aes_simd_algs); i++)
-		if (aes_simd_algs[i])
-			simd_skcipher_free(aes_simd_algs[i]);
-
 	crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
 static int __init aes_init(void)
 {
-	struct simd_skcipher_alg *simd;
-	const char *basename;
-	const char *algname;
-	const char *drvname;
-	int err;
-	int i;
-
 	if (!(elf_hwcap & HWCAP_NEON))
 		return -ENODEV;
 
-	err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
-	if (err)
-		return err;
-
-	for (i = 0; i < ARRAY_SIZE(aes_algs); i++) {
-		if (!(aes_algs[i].base.cra_flags & CRYPTO_ALG_INTERNAL))
-			continue;
-
-		algname = aes_algs[i].base.cra_name + 2;
-		drvname = aes_algs[i].base.cra_driver_name + 2;
-		basename = aes_algs[i].base.cra_driver_name;
-		simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename);
-		err = PTR_ERR(simd);
-		if (IS_ERR(simd))
-			goto unregister_simds;
-
-		aes_simd_algs[i] = simd;
-	}
-	return 0;
-
-unregister_simds:
-	aes_exit();
-	return err;
+	return crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
 }
 
-late_initcall(aes_init);
+module_init(aes_init);
 module_exit(aes_exit);
diff --git a/arch/arm/crypto/blake2b-neon-core.S b/arch/arm/crypto/blake2b-neon-core.S
deleted file mode 100644
index 0406a186377f..000000000000
--- a/arch/arm/crypto/blake2b-neon-core.S
+++ /dev/null
@@ -1,347 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * BLAKE2b digest algorithm, NEON accelerated
- *
- * Copyright 2020 Google LLC
- *
- * Author: Eric Biggers <ebiggers@google.com>
- */
-
-#include <linux/linkage.h>
-
-	.text
-	.fpu		neon
-
-	// The arguments to blake2b_compress_neon()
-	STATE		.req	r0
-	BLOCK		.req	r1
-	NBLOCKS		.req	r2
-	INC		.req	r3
-
-	// Pointers to the rotation tables
-	ROR24_TABLE	.req	r4
-	ROR16_TABLE	.req	r5
-
-	// The original stack pointer
-	ORIG_SP		.req	r6
-
-	// NEON registers which contain the message words of the current block.
-	// M_0-M_3 are occasionally used for other purposes too.
-	M_0		.req	d16
-	M_1		.req	d17
-	M_2		.req	d18
-	M_3		.req	d19
-	M_4		.req	d20
-	M_5		.req	d21
-	M_6		.req	d22
-	M_7		.req	d23
-	M_8		.req	d24
-	M_9		.req	d25
-	M_10		.req	d26
-	M_11		.req	d27
-	M_12		.req	d28
-	M_13		.req	d29
-	M_14		.req	d30
-	M_15		.req	d31
-
-	.align		4
-	// Tables for computing ror64(x, 24) and ror64(x, 16) using the vtbl.8
-	// instruction.  This is the most efficient way to implement these
-	// rotation amounts with NEON.  (On Cortex-A53 it's the same speed as
-	// vshr.u64 + vsli.u64, while on Cortex-A7 it's faster.)
-.Lror24_table:
-	.byte		3, 4, 5, 6, 7, 0, 1, 2
-.Lror16_table:
-	.byte		2, 3, 4, 5, 6, 7, 0, 1
-	// The BLAKE2b initialization vector
-.Lblake2b_IV:
-	.quad		0x6a09e667f3bcc908, 0xbb67ae8584caa73b
-	.quad		0x3c6ef372fe94f82b, 0xa54ff53a5f1d36f1
-	.quad		0x510e527fade682d1, 0x9b05688c2b3e6c1f
-	.quad		0x1f83d9abfb41bd6b, 0x5be0cd19137e2179
-
-// Execute one round of BLAKE2b by updating the state matrix v[0..15] in the
-// NEON registers q0-q7.  The message block is in q8..q15 (M_0-M_15).  The stack
-// pointer points to a 32-byte aligned buffer containing a copy of q8 and q9
-// (M_0-M_3), so that they can be reloaded if they are used as temporary
-// registers.  The macro arguments s0-s15 give the order in which the message
-// words are used in this round.  'final' is 1 if this is the final round.
-.macro	_blake2b_round	s0, s1, s2, s3, s4, s5, s6, s7, \
-			s8, s9, s10, s11, s12, s13, s14, s15, final=0
-
-	// Mix the columns:
-	// (v[0], v[4], v[8], v[12]), (v[1], v[5], v[9], v[13]),
-	// (v[2], v[6], v[10], v[14]), and (v[3], v[7], v[11], v[15]).
-
-	// a += b + m[blake2b_sigma[r][2*i + 0]];
-	vadd.u64	q0, q0, q2
-	vadd.u64	q1, q1, q3
-	vadd.u64	d0, d0, M_\s0
-	vadd.u64	d1, d1, M_\s2
-	vadd.u64	d2, d2, M_\s4
-	vadd.u64	d3, d3, M_\s6
-
-	// d = ror64(d ^ a, 32);
-	veor		q6, q6, q0
-	veor		q7, q7, q1
-	vrev64.32	q6, q6
-	vrev64.32	q7, q7
-
-	// c += d;
-	vadd.u64	q4, q4, q6
-	vadd.u64	q5, q5, q7
-
-	// b = ror64(b ^ c, 24);
-	vld1.8		{M_0}, [ROR24_TABLE, :64]
-	veor		q2, q2, q4
-	veor		q3, q3, q5
-	vtbl.8		d4, {d4}, M_0
-	vtbl.8		d5, {d5}, M_0
-	vtbl.8		d6, {d6}, M_0
-	vtbl.8		d7, {d7}, M_0
-
-	// a += b + m[blake2b_sigma[r][2*i + 1]];
-	//
-	// M_0 got clobbered above, so we have to reload it if any of the four
-	// message words this step needs happens to be M_0.  Otherwise we don't
-	// need to reload it here, as it will just get clobbered again below.
-.if \s1 == 0 || \s3 == 0 || \s5 == 0 || \s7 == 0
-	vld1.8		{M_0}, [sp, :64]
-.endif
-	vadd.u64	q0, q0, q2
-	vadd.u64	q1, q1, q3
-	vadd.u64	d0, d0, M_\s1
-	vadd.u64	d1, d1, M_\s3
-	vadd.u64	d2, d2, M_\s5
-	vadd.u64	d3, d3, M_\s7
-
-	// d = ror64(d ^ a, 16);
-	vld1.8		{M_0}, [ROR16_TABLE, :64]
-	veor		q6, q6, q0
-	veor		q7, q7, q1
-	vtbl.8		d12, {d12}, M_0
-	vtbl.8		d13, {d13}, M_0
-	vtbl.8		d14, {d14}, M_0
-	vtbl.8		d15, {d15}, M_0
-
-	// c += d;
-	vadd.u64	q4, q4, q6
-	vadd.u64	q5, q5, q7
-
-	// b = ror64(b ^ c, 63);
-	//
-	// This rotation amount isn't a multiple of 8, so it has to be
-	// implemented using a pair of shifts, which requires temporary
-	// registers.  Use q8-q9 (M_0-M_3) for this, and reload them afterwards.
-	veor		q8, q2, q4
-	veor		q9, q3, q5
-	vshr.u64	q2, q8, #63
-	vshr.u64	q3, q9, #63
-	vsli.u64	q2, q8, #1
-	vsli.u64	q3, q9, #1
-	vld1.8		{q8-q9}, [sp, :256]
-
-	// Mix the diagonals:
-	// (v[0], v[5], v[10], v[15]), (v[1], v[6], v[11], v[12]),
-	// (v[2], v[7], v[8], v[13]), and (v[3], v[4], v[9], v[14]).
-	//
-	// There are two possible ways to do this: use 'vext' instructions to
-	// shift the rows of the matrix so that the diagonals become columns,
-	// and undo it afterwards; or just use 64-bit operations on 'd'
-	// registers instead of 128-bit operations on 'q' registers.  We use the
-	// latter approach, as it performs much better on Cortex-A7.
-
-	// a += b + m[blake2b_sigma[r][2*i + 0]];
-	vadd.u64	d0, d0, d5
-	vadd.u64	d1, d1, d6
-	vadd.u64	d2, d2, d7
-	vadd.u64	d3, d3, d4
-	vadd.u64	d0, d0, M_\s8
-	vadd.u64	d1, d1, M_\s10
-	vadd.u64	d2, d2, M_\s12
-	vadd.u64	d3, d3, M_\s14
-
-	// d = ror64(d ^ a, 32);
-	veor		d15, d15, d0
-	veor		d12, d12, d1
-	veor		d13, d13, d2
-	veor		d14, d14, d3
-	vrev64.32	d15, d15
-	vrev64.32	d12, d12
-	vrev64.32	d13, d13
-	vrev64.32	d14, d14
-
-	// c += d;
-	vadd.u64	d10, d10, d15
-	vadd.u64	d11, d11, d12
-	vadd.u64	d8, d8, d13
-	vadd.u64	d9, d9, d14
-
-	// b = ror64(b ^ c, 24);
-	vld1.8		{M_0}, [ROR24_TABLE, :64]
-	veor		d5, d5, d10
-	veor		d6, d6, d11
-	veor		d7, d7, d8
-	veor		d4, d4, d9
-	vtbl.8		d5, {d5}, M_0
-	vtbl.8		d6, {d6}, M_0
-	vtbl.8		d7, {d7}, M_0
-	vtbl.8		d4, {d4}, M_0
-
-	// a += b + m[blake2b_sigma[r][2*i + 1]];
-.if \s9 == 0 || \s11 == 0 || \s13 == 0 || \s15 == 0
-	vld1.8		{M_0}, [sp, :64]
-.endif
-	vadd.u64	d0, d0, d5
-	vadd.u64	d1, d1, d6
-	vadd.u64	d2, d2, d7
-	vadd.u64	d3, d3, d4
-	vadd.u64	d0, d0, M_\s9
-	vadd.u64	d1, d1, M_\s11
-	vadd.u64	d2, d2, M_\s13
-	vadd.u64	d3, d3, M_\s15
-
-	// d = ror64(d ^ a, 16);
-	vld1.8		{M_0}, [ROR16_TABLE, :64]
-	veor		d15, d15, d0
-	veor		d12, d12, d1
-	veor		d13, d13, d2
-	veor		d14, d14, d3
-	vtbl.8		d12, {d12}, M_0
-	vtbl.8		d13, {d13}, M_0
-	vtbl.8		d14, {d14}, M_0
-	vtbl.8		d15, {d15}, M_0
-
-	// c += d;
-	vadd.u64	d10, d10, d15
-	vadd.u64	d11, d11, d12
-	vadd.u64	d8, d8, d13
-	vadd.u64	d9, d9, d14
-
-	// b = ror64(b ^ c, 63);
-	veor		d16, d4, d9
-	veor		d17, d5, d10
-	veor		d18, d6, d11
-	veor		d19, d7, d8
-	vshr.u64	q2, q8, #63
-	vshr.u64	q3, q9, #63
-	vsli.u64	q2, q8, #1
-	vsli.u64	q3, q9, #1
-	// Reloading q8-q9 can be skipped on the final round.
-.if ! \final
-	vld1.8		{q8-q9}, [sp, :256]
-.endif
-.endm
-
-//
-// void blake2b_compress_neon(struct blake2b_state *state,
-//			      const u8 *block, size_t nblocks, u32 inc);
-//
-// Only the first three fields of struct blake2b_state are used:
-//	u64 h[8];	(inout)
-//	u64 t[2];	(inout)
-//	u64 f[2];	(in)
-//
-	.align		5
-ENTRY(blake2b_compress_neon)
-	push		{r4-r10}
-
-	// Allocate a 32-byte stack buffer that is 32-byte aligned.
-	mov		ORIG_SP, sp
-	sub		ip, sp, #32
-	bic		ip, ip, #31
-	mov		sp, ip
-
-	adr		ROR24_TABLE, .Lror24_table
-	adr		ROR16_TABLE, .Lror16_table
-
-	mov		ip, STATE
-	vld1.64		{q0-q1}, [ip]!		// Load h[0..3]
-	vld1.64		{q2-q3}, [ip]!		// Load h[4..7]
-.Lnext_block:
-	  adr		r10, .Lblake2b_IV
-	vld1.64		{q14-q15}, [ip]		// Load t[0..1] and f[0..1]
-	vld1.64		{q4-q5}, [r10]!		// Load IV[0..3]
-	  vmov		r7, r8, d28		// Copy t[0] to (r7, r8)
-	vld1.64		{q6-q7}, [r10]		// Load IV[4..7]
-	  adds		r7, r7, INC		// Increment counter
-	bcs		.Lslow_inc_ctr
-	vmov.i32	d28[0], r7
-	vst1.64		{d28}, [ip]		// Update t[0]
-.Linc_ctr_done:
-
-	// Load the next message block and finish initializing the state matrix
-	// 'v'.  Fortunately, there are exactly enough NEON registers to fit the
-	// entire state matrix in q0-q7 and the entire message block in q8-15.
-	//
-	// However, _blake2b_round also needs some extra registers for rotates,
-	// so we have to spill some registers.  It's better to spill the message
-	// registers than the state registers, as the message doesn't change.
-	// Therefore we store a copy of the first 32 bytes of the message block
-	// (q8-q9) in an aligned buffer on the stack so that they can be
-	// reloaded when needed.  (We could just reload directly from the
-	// message buffer, but it's faster to use aligned loads.)
-	vld1.8		{q8-q9}, [BLOCK]!
-	  veor		q6, q6, q14	// v[12..13] = IV[4..5] ^ t[0..1]
-	vld1.8		{q10-q11}, [BLOCK]!
-	  veor		q7, q7, q15	// v[14..15] = IV[6..7] ^ f[0..1]
-	vld1.8		{q12-q13}, [BLOCK]!
-	vst1.8		{q8-q9}, [sp, :256]
-	  mov		ip, STATE
-	vld1.8		{q14-q15}, [BLOCK]!
-
-	// Execute the rounds.  Each round is provided the order in which it
-	// needs to use the message words.
-	_blake2b_round	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
-	_blake2b_round	14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3
-	_blake2b_round	11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4
-	_blake2b_round	7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8
-	_blake2b_round	9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13
-	_blake2b_round	2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9
-	_blake2b_round	12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11
-	_blake2b_round	13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10
-	_blake2b_round	6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5
-	_blake2b_round	10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0
-	_blake2b_round	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
-	_blake2b_round	14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3 \
-			final=1
-
-	// Fold the final state matrix into the hash chaining value:
-	//
-	//	for (i = 0; i < 8; i++)
-	//		h[i] ^= v[i] ^ v[i + 8];
-	//
-	  vld1.64	{q8-q9}, [ip]!		// Load old h[0..3]
-	veor		q0, q0, q4		// v[0..1] ^= v[8..9]
-	veor		q1, q1, q5		// v[2..3] ^= v[10..11]
-	  vld1.64	{q10-q11}, [ip]		// Load old h[4..7]
-	veor		q2, q2, q6		// v[4..5] ^= v[12..13]
-	veor		q3, q3, q7		// v[6..7] ^= v[14..15]
-	veor		q0, q0, q8		// v[0..1] ^= h[0..1]
-	veor		q1, q1, q9		// v[2..3] ^= h[2..3]
-	  mov		ip, STATE
-	  subs		NBLOCKS, NBLOCKS, #1	// nblocks--
-	  vst1.64	{q0-q1}, [ip]!		// Store new h[0..3]
-	veor		q2, q2, q10		// v[4..5] ^= h[4..5]
-	veor		q3, q3, q11		// v[6..7] ^= h[6..7]
-	  vst1.64	{q2-q3}, [ip]!		// Store new h[4..7]
-
-	// Advance to the next block, if there is one.
-	bne		.Lnext_block		// nblocks != 0?
-
-	mov		sp, ORIG_SP
-	pop		{r4-r10}
-	mov		pc, lr
-
-.Lslow_inc_ctr:
-	// Handle the case where the counter overflowed its low 32 bits, by
-	// carrying the overflow bit into the full 128-bit counter.
-	vmov		r9, r10, d29
-	adcs		r8, r8, #0
-	adcs		r9, r9, #0
-	adc		r10, r10, #0
-	vmov		d28, r7, r8
-	vmov		d29, r9, r10
-	vst1.64		{q14}, [ip]		// Update t[0] and t[1]
-	b		.Linc_ctr_done
-ENDPROC(blake2b_compress_neon)
diff --git a/arch/arm/crypto/blake2b-neon-glue.c b/arch/arm/crypto/blake2b-neon-glue.c
deleted file mode 100644
index 4b59d027ba4a..000000000000
--- a/arch/arm/crypto/blake2b-neon-glue.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * BLAKE2b digest algorithm, NEON accelerated
- *
- * Copyright 2020 Google LLC
- */
-
-#include <crypto/internal/blake2b.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-
-#include <linux/module.h>
-#include <linux/sizes.h>
-
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-asmlinkage void blake2b_compress_neon(struct blake2b_state *state,
-				      const u8 *block, size_t nblocks, u32 inc);
-
-static void blake2b_compress_arch(struct blake2b_state *state,
-				  const u8 *block, size_t nblocks, u32 inc)
-{
-	if (!crypto_simd_usable()) {
-		blake2b_compress_generic(state, block, nblocks, inc);
-		return;
-	}
-
-	do {
-		const size_t blocks = min_t(size_t, nblocks,
-					    SZ_4K / BLAKE2B_BLOCK_SIZE);
-
-		kernel_neon_begin();
-		blake2b_compress_neon(state, block, blocks, inc);
-		kernel_neon_end();
-
-		nblocks -= blocks;
-		block += blocks * BLAKE2B_BLOCK_SIZE;
-	} while (nblocks);
-}
-
-static int crypto_blake2b_update_neon(struct shash_desc *desc,
-				      const u8 *in, unsigned int inlen)
-{
-	return crypto_blake2b_update(desc, in, inlen, blake2b_compress_arch);
-}
-
-static int crypto_blake2b_final_neon(struct shash_desc *desc, u8 *out)
-{
-	return crypto_blake2b_final(desc, out, blake2b_compress_arch);
-}
-
-#define BLAKE2B_ALG(name, driver_name, digest_size)			\
-	{								\
-		.base.cra_name		= name,				\
-		.base.cra_driver_name	= driver_name,			\
-		.base.cra_priority	= 200,				\
-		.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,	\
-		.base.cra_blocksize	= BLAKE2B_BLOCK_SIZE,		\
-		.base.cra_ctxsize	= sizeof(struct blake2b_tfm_ctx), \
-		.base.cra_module	= THIS_MODULE,			\
-		.digestsize		= digest_size,			\
-		.setkey			= crypto_blake2b_setkey,	\
-		.init			= crypto_blake2b_init,		\
-		.update			= crypto_blake2b_update_neon,	\
-		.final			= crypto_blake2b_final_neon,	\
-		.descsize		= sizeof(struct blake2b_state),	\
-	}
-
-static struct shash_alg blake2b_neon_algs[] = {
-	BLAKE2B_ALG("blake2b-160", "blake2b-160-neon", BLAKE2B_160_HASH_SIZE),
-	BLAKE2B_ALG("blake2b-256", "blake2b-256-neon", BLAKE2B_256_HASH_SIZE),
-	BLAKE2B_ALG("blake2b-384", "blake2b-384-neon", BLAKE2B_384_HASH_SIZE),
-	BLAKE2B_ALG("blake2b-512", "blake2b-512-neon", BLAKE2B_512_HASH_SIZE),
-};
-
-static int __init blake2b_neon_mod_init(void)
-{
-	if (!(elf_hwcap & HWCAP_NEON))
-		return -ENODEV;
-
-	return crypto_register_shashes(blake2b_neon_algs,
-				       ARRAY_SIZE(blake2b_neon_algs));
-}
-
-static void __exit blake2b_neon_mod_exit(void)
-{
-	crypto_unregister_shashes(blake2b_neon_algs,
-				  ARRAY_SIZE(blake2b_neon_algs));
-}
-
-module_init(blake2b_neon_mod_init);
-module_exit(blake2b_neon_mod_exit);
-
-MODULE_DESCRIPTION("BLAKE2b digest algorithm, NEON accelerated");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>");
-MODULE_ALIAS_CRYPTO("blake2b-160");
-MODULE_ALIAS_CRYPTO("blake2b-160-neon");
-MODULE_ALIAS_CRYPTO("blake2b-256");
-MODULE_ALIAS_CRYPTO("blake2b-256-neon");
-MODULE_ALIAS_CRYPTO("blake2b-384");
-MODULE_ALIAS_CRYPTO("blake2b-384-neon");
-MODULE_ALIAS_CRYPTO("blake2b-512");
-MODULE_ALIAS_CRYPTO("blake2b-512-neon");
diff --git a/arch/arm/crypto/blake2s-core.S b/arch/arm/crypto/blake2s-core.S
deleted file mode 100644
index df40e46601f1..000000000000
--- a/arch/arm/crypto/blake2s-core.S
+++ /dev/null
@@ -1,306 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * BLAKE2s digest algorithm, ARM scalar implementation
- *
- * Copyright 2020 Google LLC
- *
- * Author: Eric Biggers <ebiggers@google.com>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	// Registers used to hold message words temporarily.  There aren't
-	// enough ARM registers to hold the whole message block, so we have to
-	// load the words on-demand.
-	M_0		.req	r12
-	M_1		.req	r14
-
-// The BLAKE2s initialization vector
-.Lblake2s_IV:
-	.word	0x6A09E667, 0xBB67AE85, 0x3C6EF372, 0xA54FF53A
-	.word	0x510E527F, 0x9B05688C, 0x1F83D9AB, 0x5BE0CD19
-
-.macro __ldrd		a, b, src, offset
-#if __LINUX_ARM_ARCH__ >= 6
-	ldrd		\a, \b, [\src, #\offset]
-#else
-	ldr		\a, [\src, #\offset]
-	ldr		\b, [\src, #\offset + 4]
-#endif
-.endm
-
-.macro __strd		a, b, dst, offset
-#if __LINUX_ARM_ARCH__ >= 6
-	strd		\a, \b, [\dst, #\offset]
-#else
-	str		\a, [\dst, #\offset]
-	str		\b, [\dst, #\offset + 4]
-#endif
-.endm
-
-.macro _le32_bswap	a, tmp
-#ifdef __ARMEB__
-	rev_l		\a, \tmp
-#endif
-.endm
-
-.macro _le32_bswap_8x	a, b, c, d, e, f, g, h,  tmp
-	_le32_bswap	\a, \tmp
-	_le32_bswap	\b, \tmp
-	_le32_bswap	\c, \tmp
-	_le32_bswap	\d, \tmp
-	_le32_bswap	\e, \tmp
-	_le32_bswap	\f, \tmp
-	_le32_bswap	\g, \tmp
-	_le32_bswap	\h, \tmp
-.endm
-
-// Execute a quarter-round of BLAKE2s by mixing two columns or two diagonals.
-// (a0, b0, c0, d0) and (a1, b1, c1, d1) give the registers containing the two
-// columns/diagonals.  s0-s1 are the word offsets to the message words the first
-// column/diagonal needs, and likewise s2-s3 for the second column/diagonal.
-// M_0 and M_1 are free to use, and the message block can be found at sp + 32.
-//
-// Note that to save instructions, the rotations don't happen when the
-// pseudocode says they should, but rather they are delayed until the values are
-// used.  See the comment above _blake2s_round().
-.macro _blake2s_quarterround  a0, b0, c0, d0,  a1, b1, c1, d1,  s0, s1, s2, s3
-
-	ldr		M_0, [sp, #32 + 4 * \s0]
-	ldr		M_1, [sp, #32 + 4 * \s2]
-
-	// a += b + m[blake2s_sigma[r][2*i + 0]];
-	add		\a0, \a0, \b0, ror #brot
-	add		\a1, \a1, \b1, ror #brot
-	add		\a0, \a0, M_0
-	add		\a1, \a1, M_1
-
-	// d = ror32(d ^ a, 16);
-	eor		\d0, \a0, \d0, ror #drot
-	eor		\d1, \a1, \d1, ror #drot
-
-	// c += d;
-	add		\c0, \c0, \d0, ror #16
-	add		\c1, \c1, \d1, ror #16
-
-	// b = ror32(b ^ c, 12);
-	eor		\b0, \c0, \b0, ror #brot
-	eor		\b1, \c1, \b1, ror #brot
-
-	ldr		M_0, [sp, #32 + 4 * \s1]
-	ldr		M_1, [sp, #32 + 4 * \s3]
-
-	// a += b + m[blake2s_sigma[r][2*i + 1]];
-	add		\a0, \a0, \b0, ror #12
-	add		\a1, \a1, \b1, ror #12
-	add		\a0, \a0, M_0
-	add		\a1, \a1, M_1
-
-	// d = ror32(d ^ a, 8);
-	eor		\d0, \a0, \d0, ror#16
-	eor		\d1, \a1, \d1, ror#16
-
-	// c += d;
-	add		\c0, \c0, \d0, ror#8
-	add		\c1, \c1, \d1, ror#8
-
-	// b = ror32(b ^ c, 7);
-	eor		\b0, \c0, \b0, ror#12
-	eor		\b1, \c1, \b1, ror#12
-.endm
-
-// Execute one round of BLAKE2s by updating the state matrix v[0..15].  v[0..9]
-// are in r0..r9.  The stack pointer points to 8 bytes of scratch space for
-// spilling v[8..9], then to v[9..15], then to the message block.  r10-r12 and
-// r14 are free to use.  The macro arguments s0-s15 give the order in which the
-// message words are used in this round.
-//
-// All rotates are performed using the implicit rotate operand accepted by the
-// 'add' and 'eor' instructions.  This is faster than using explicit rotate
-// instructions.  To make this work, we allow the values in the second and last
-// rows of the BLAKE2s state matrix (rows 'b' and 'd') to temporarily have the
-// wrong rotation amount.  The rotation amount is then fixed up just in time
-// when the values are used.  'brot' is the number of bits the values in row 'b'
-// need to be rotated right to arrive at the correct values, and 'drot'
-// similarly for row 'd'.  (brot, drot) start out as (0, 0) but we make it such
-// that they end up as (7, 8) after every round.
-.macro	_blake2s_round	s0, s1, s2, s3, s4, s5, s6, s7, \
-			s8, s9, s10, s11, s12, s13, s14, s15
-
-	// Mix first two columns:
-	// (v[0], v[4], v[8], v[12]) and (v[1], v[5], v[9], v[13]).
-	__ldrd		r10, r11, sp, 16	// load v[12] and v[13]
-	_blake2s_quarterround	r0, r4, r8, r10,  r1, r5, r9, r11, \
-				\s0, \s1, \s2, \s3
-	__strd		r8, r9, sp, 0
-	__strd		r10, r11, sp, 16
-
-	// Mix second two columns:
-	// (v[2], v[6], v[10], v[14]) and (v[3], v[7], v[11], v[15]).
-	__ldrd		r8, r9, sp, 8		// load v[10] and v[11]
-	__ldrd		r10, r11, sp, 24	// load v[14] and v[15]
-	_blake2s_quarterround	r2, r6, r8, r10,  r3, r7, r9, r11, \
-				\s4, \s5, \s6, \s7
-	str		r10, [sp, #24]		// store v[14]
-	// v[10], v[11], and v[15] are used below, so no need to store them yet.
-
-	.set brot, 7
-	.set drot, 8
-
-	// Mix first two diagonals:
-	// (v[0], v[5], v[10], v[15]) and (v[1], v[6], v[11], v[12]).
-	ldr		r10, [sp, #16]		// load v[12]
-	_blake2s_quarterround	r0, r5, r8, r11,  r1, r6, r9, r10, \
-				\s8, \s9, \s10, \s11
-	__strd		r8, r9, sp, 8
-	str		r11, [sp, #28]
-	str		r10, [sp, #16]
-
-	// Mix second two diagonals:
-	// (v[2], v[7], v[8], v[13]) and (v[3], v[4], v[9], v[14]).
-	__ldrd		r8, r9, sp, 0		// load v[8] and v[9]
-	__ldrd		r10, r11, sp, 20	// load v[13] and v[14]
-	_blake2s_quarterround	r2, r7, r8, r10,  r3, r4, r9, r11, \
-				\s12, \s13, \s14, \s15
-	__strd		r10, r11, sp, 20
-.endm
-
-//
-// void blake2s_compress(struct blake2s_state *state,
-//			 const u8 *block, size_t nblocks, u32 inc);
-//
-// Only the first three fields of struct blake2s_state are used:
-//	u32 h[8];	(inout)
-//	u32 t[2];	(inout)
-//	u32 f[2];	(in)
-//
-	.align		5
-ENTRY(blake2s_compress)
-	push		{r0-r2,r4-r11,lr}	// keep this an even number
-
-.Lnext_block:
-	// r0 is 'state'
-	// r1 is 'block'
-	// r3 is 'inc'
-
-	// Load and increment the counter t[0..1].
-	__ldrd		r10, r11, r0, 32
-	adds		r10, r10, r3
-	adc		r11, r11, #0
-	__strd		r10, r11, r0, 32
-
-	// _blake2s_round is very short on registers, so copy the message block
-	// to the stack to save a register during the rounds.  This also has the
-	// advantage that misalignment only needs to be dealt with in one place.
-	sub		sp, sp, #64
-	mov		r12, sp
-	tst		r1, #3
-	bne		.Lcopy_block_misaligned
-	ldmia		r1!, {r2-r9}
-	_le32_bswap_8x	r2, r3, r4, r5, r6, r7, r8, r9,  r14
-	stmia		r12!, {r2-r9}
-	ldmia		r1!, {r2-r9}
-	_le32_bswap_8x	r2, r3, r4, r5, r6, r7, r8, r9,  r14
-	stmia		r12, {r2-r9}
-.Lcopy_block_done:
-	str		r1, [sp, #68]		// Update message pointer
-
-	// Calculate v[8..15].  Push v[9..15] onto the stack, and leave space
-	// for spilling v[8..9].  Leave v[8..9] in r8-r9.
-	mov		r14, r0			// r14 = state
-	adr		r12, .Lblake2s_IV
-	ldmia		r12!, {r8-r9}		// load IV[0..1]
-	__ldrd		r0, r1, r14, 40		// load f[0..1]
-	ldm		r12, {r2-r7}		// load IV[3..7]
-	eor		r4, r4, r10		// v[12] = IV[4] ^ t[0]
-	eor		r5, r5, r11		// v[13] = IV[5] ^ t[1]
-	eor		r6, r6, r0		// v[14] = IV[6] ^ f[0]
-	eor		r7, r7, r1		// v[15] = IV[7] ^ f[1]
-	push		{r2-r7}			// push v[9..15]
-	sub		sp, sp, #8		// leave space for v[8..9]
-
-	// Load h[0..7] == v[0..7].
-	ldm		r14, {r0-r7}
-
-	// Execute the rounds.  Each round is provided the order in which it
-	// needs to use the message words.
-	.set brot, 0
-	.set drot, 0
-	_blake2s_round	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
-	_blake2s_round	14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3
-	_blake2s_round	11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4
-	_blake2s_round	7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8
-	_blake2s_round	9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13
-	_blake2s_round	2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9
-	_blake2s_round	12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11
-	_blake2s_round	13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10
-	_blake2s_round	6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5
-	_blake2s_round	10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0
-
-	// Fold the final state matrix into the hash chaining value:
-	//
-	//	for (i = 0; i < 8; i++)
-	//		h[i] ^= v[i] ^ v[i + 8];
-	//
-	ldr		r14, [sp, #96]		// r14 = &h[0]
-	add		sp, sp, #8		// v[8..9] are already loaded.
-	pop		{r10-r11}		// load v[10..11]
-	eor		r0, r0, r8
-	eor		r1, r1, r9
-	eor		r2, r2, r10
-	eor		r3, r3, r11
-	ldm		r14, {r8-r11}		// load h[0..3]
-	eor		r0, r0, r8
-	eor		r1, r1, r9
-	eor		r2, r2, r10
-	eor		r3, r3, r11
-	stmia		r14!, {r0-r3}		// store new h[0..3]
-	ldm		r14, {r0-r3}		// load old h[4..7]
-	pop		{r8-r11}		// load v[12..15]
-	eor		r0, r0, r4, ror #brot
-	eor		r1, r1, r5, ror #brot
-	eor		r2, r2, r6, ror #brot
-	eor		r3, r3, r7, ror #brot
-	eor		r0, r0, r8, ror #drot
-	eor		r1, r1, r9, ror #drot
-	eor		r2, r2, r10, ror #drot
-	eor		r3, r3, r11, ror #drot
-	  add		sp, sp, #64		// skip copy of message block
-	stm		r14, {r0-r3}		// store new h[4..7]
-
-	// Advance to the next block, if there is one.  Note that if there are
-	// multiple blocks, then 'inc' (the counter increment amount) must be
-	// 64.  So we can simply set it to 64 without re-loading it.
-	ldm		sp, {r0, r1, r2}	// load (state, block, nblocks)
-	mov		r3, #64			// set 'inc'
-	subs		r2, r2, #1		// nblocks--
-	str		r2, [sp, #8]
-	bne		.Lnext_block		// nblocks != 0?
-
-	pop		{r0-r2,r4-r11,pc}
-
-	// The next message block (pointed to by r1) isn't 4-byte aligned, so it
-	// can't be loaded using ldmia.  Copy it to the stack buffer (pointed to
-	// by r12) using an alternative method.  r2-r9 are free to use.
-.Lcopy_block_misaligned:
-	mov		r2, #64
-1:
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-	ldr		r3, [r1], #4
-	_le32_bswap	r3, r4
-#else
-	ldrb		r3, [r1, #0]
-	ldrb		r4, [r1, #1]
-	ldrb		r5, [r1, #2]
-	ldrb		r6, [r1, #3]
-	add		r1, r1, #4
-	orr		r3, r3, r4, lsl #8
-	orr		r3, r3, r5, lsl #16
-	orr		r3, r3, r6, lsl #24
-#endif
-	subs		r2, r2, #4
-	str		r3, [r12], #4
-	bne		1b
-	b		.Lcopy_block_done
-ENDPROC(blake2s_compress)
diff --git a/arch/arm/crypto/blake2s-glue.c b/arch/arm/crypto/blake2s-glue.c
deleted file mode 100644
index 0238a70d9581..000000000000
--- a/arch/arm/crypto/blake2s-glue.c
+++ /dev/null
@@ -1,7 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include <crypto/internal/blake2s.h>
-#include <linux/module.h>
-
-/* defined in blake2s-core.S */
-EXPORT_SYMBOL(blake2s_compress);
diff --git a/arch/arm/crypto/chacha-glue.c b/arch/arm/crypto/chacha-glue.c
deleted file mode 100644
index cdde8fd01f8f..000000000000
--- a/arch/arm/crypto/chacha-glue.c
+++ /dev/null
@@ -1,358 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * ARM NEON accelerated ChaCha and XChaCha stream ciphers,
- * including ChaCha20 (RFC7539)
- *
- * Copyright (C) 2016-2019 Linaro, Ltd. <ard.biesheuvel@linaro.org>
- * Copyright (C) 2015 Martin Willi
- */
-
-#include <crypto/algapi.h>
-#include <crypto/internal/chacha.h>
-#include <crypto/internal/simd.h>
-#include <crypto/internal/skcipher.h>
-#include <linux/jump_label.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/cputype.h>
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-asmlinkage void chacha_block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
-				      int nrounds);
-asmlinkage void chacha_4block_xor_neon(const u32 *state, u8 *dst, const u8 *src,
-				       int nrounds, unsigned int nbytes);
-asmlinkage void hchacha_block_arm(const u32 *state, u32 *out, int nrounds);
-asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
-
-asmlinkage void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
-			     const u32 *state, int nrounds);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_neon);
-
-static inline bool neon_usable(void)
-{
-	return static_branch_likely(&use_neon) && crypto_simd_usable();
-}
-
-static void chacha_doneon(u32 *state, u8 *dst, const u8 *src,
-			  unsigned int bytes, int nrounds)
-{
-	u8 buf[CHACHA_BLOCK_SIZE];
-
-	while (bytes > CHACHA_BLOCK_SIZE) {
-		unsigned int l = min(bytes, CHACHA_BLOCK_SIZE * 4U);
-
-		chacha_4block_xor_neon(state, dst, src, nrounds, l);
-		bytes -= l;
-		src += l;
-		dst += l;
-		state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
-	}
-	if (bytes) {
-		const u8 *s = src;
-		u8 *d = dst;
-
-		if (bytes != CHACHA_BLOCK_SIZE)
-			s = d = memcpy(buf, src, bytes);
-		chacha_block_xor_neon(state, d, s, nrounds);
-		if (d != dst)
-			memcpy(dst, buf, bytes);
-		state[12]++;
-	}
-}
-
-void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
-{
-	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable()) {
-		hchacha_block_arm(state, stream, nrounds);
-	} else {
-		kernel_neon_begin();
-		hchacha_block_neon(state, stream, nrounds);
-		kernel_neon_end();
-	}
-}
-EXPORT_SYMBOL(hchacha_block_arch);
-
-void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
-{
-	chacha_init_generic(state, key, iv);
-}
-EXPORT_SYMBOL(chacha_init_arch);
-
-void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
-		       int nrounds)
-{
-	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon_usable() ||
-	    bytes <= CHACHA_BLOCK_SIZE) {
-		chacha_doarm(dst, src, bytes, state, nrounds);
-		state[12] += DIV_ROUND_UP(bytes, CHACHA_BLOCK_SIZE);
-		return;
-	}
-
-	do {
-		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
-
-		kernel_neon_begin();
-		chacha_doneon(state, dst, src, todo, nrounds);
-		kernel_neon_end();
-
-		bytes -= todo;
-		src += todo;
-		dst += todo;
-	} while (bytes);
-}
-EXPORT_SYMBOL(chacha_crypt_arch);
-
-static int chacha_stream_xor(struct skcipher_request *req,
-			     const struct chacha_ctx *ctx, const u8 *iv,
-			     bool neon)
-{
-	struct skcipher_walk walk;
-	u32 state[16];
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	chacha_init_generic(state, ctx->key, iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-
-		if (nbytes < walk.total)
-			nbytes = round_down(nbytes, walk.stride);
-
-		if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon) {
-			chacha_doarm(walk.dst.virt.addr, walk.src.virt.addr,
-				     nbytes, state, ctx->nrounds);
-			state[12] += DIV_ROUND_UP(nbytes, CHACHA_BLOCK_SIZE);
-		} else {
-			kernel_neon_begin();
-			chacha_doneon(state, walk.dst.virt.addr,
-				      walk.src.virt.addr, nbytes, ctx->nrounds);
-			kernel_neon_end();
-		}
-		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
-	}
-
-	return err;
-}
-
-static int do_chacha(struct skcipher_request *req, bool neon)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	return chacha_stream_xor(req, ctx, req->iv, neon);
-}
-
-static int chacha_arm(struct skcipher_request *req)
-{
-	return do_chacha(req, false);
-}
-
-static int chacha_neon(struct skcipher_request *req)
-{
-	return do_chacha(req, neon_usable());
-}
-
-static int do_xchacha(struct skcipher_request *req, bool neon)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct chacha_ctx subctx;
-	u32 state[16];
-	u8 real_iv[16];
-
-	chacha_init_generic(state, ctx->key, req->iv);
-
-	if (!IS_ENABLED(CONFIG_KERNEL_MODE_NEON) || !neon) {
-		hchacha_block_arm(state, subctx.key, ctx->nrounds);
-	} else {
-		kernel_neon_begin();
-		hchacha_block_neon(state, subctx.key, ctx->nrounds);
-		kernel_neon_end();
-	}
-	subctx.nrounds = ctx->nrounds;
-
-	memcpy(&real_iv[0], req->iv + 24, 8);
-	memcpy(&real_iv[8], req->iv + 16, 8);
-	return chacha_stream_xor(req, &subctx, real_iv, neon);
-}
-
-static int xchacha_arm(struct skcipher_request *req)
-{
-	return do_xchacha(req, false);
-}
-
-static int xchacha_neon(struct skcipher_request *req)
-{
-	return do_xchacha(req, neon_usable());
-}
-
-static struct skcipher_alg arm_algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-arm",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_arm,
-		.decrypt		= chacha_arm,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-arm",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_arm,
-		.decrypt		= xchacha_arm,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-arm",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_arm,
-		.decrypt		= xchacha_arm,
-	},
-};
-
-static struct skcipher_alg neon_algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_neon,
-		.decrypt		= chacha_neon,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_neon,
-		.decrypt		= xchacha_neon,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 4 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_neon,
-		.decrypt		= xchacha_neon,
-	}
-};
-
-static int __init chacha_simd_mod_init(void)
-{
-	int err = 0;
-
-	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) {
-		err = crypto_register_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-		if (err)
-			return err;
-	}
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON)) {
-		int i;
-
-		switch (read_cpuid_part()) {
-		case ARM_CPU_PART_CORTEX_A7:
-		case ARM_CPU_PART_CORTEX_A5:
-			/*
-			 * The Cortex-A7 and Cortex-A5 do not perform well with
-			 * the NEON implementation but do incredibly with the
-			 * scalar one and use less power.
-			 */
-			for (i = 0; i < ARRAY_SIZE(neon_algs); i++)
-				neon_algs[i].base.cra_priority = 0;
-			break;
-		default:
-			static_branch_enable(&use_neon);
-		}
-
-		if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) {
-			err = crypto_register_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-			if (err)
-				crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-		}
-	}
-	return err;
-}
-
-static void __exit chacha_simd_mod_fini(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER)) {
-		crypto_unregister_skciphers(arm_algs, ARRAY_SIZE(arm_algs));
-		if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && (elf_hwcap & HWCAP_NEON))
-			crypto_unregister_skciphers(neon_algs, ARRAY_SIZE(neon_algs));
-	}
-}
-
-module_init(chacha_simd_mod_init);
-module_exit(chacha_simd_mod_fini);
-
-MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (scalar and NEON accelerated)");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("chacha20");
-MODULE_ALIAS_CRYPTO("chacha20-arm");
-MODULE_ALIAS_CRYPTO("xchacha20");
-MODULE_ALIAS_CRYPTO("xchacha20-arm");
-MODULE_ALIAS_CRYPTO("xchacha12");
-MODULE_ALIAS_CRYPTO("xchacha12-arm");
-#ifdef CONFIG_KERNEL_MODE_NEON
-MODULE_ALIAS_CRYPTO("chacha20-neon");
-MODULE_ALIAS_CRYPTO("xchacha20-neon");
-MODULE_ALIAS_CRYPTO("xchacha12-neon");
-#endif
diff --git a/arch/arm/crypto/chacha-neon-core.S b/arch/arm/crypto/chacha-neon-core.S
deleted file mode 100644
index 13d12f672656..000000000000
--- a/arch/arm/crypto/chacha-neon-core.S
+++ /dev/null
@@ -1,643 +0,0 @@
-/*
- * ChaCha/XChaCha NEON helper functions
- *
- * Copyright (C) 2016 Linaro, Ltd. <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Based on:
- * ChaCha20 256-bit cipher algorithm, RFC7539, x64 SSE3 functions
- *
- * Copyright (C) 2015 Martin Willi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
- /*
-  * NEON doesn't have a rotate instruction.  The alternatives are, more or less:
-  *
-  * (a)  vshl.u32 + vsri.u32		(needs temporary register)
-  * (b)  vshl.u32 + vshr.u32 + vorr	(needs temporary register)
-  * (c)  vrev32.16			(16-bit rotations only)
-  * (d)  vtbl.8 + vtbl.8		(multiple of 8 bits rotations only,
-  *					 needs index vector)
-  *
-  * ChaCha has 16, 12, 8, and 7-bit rotations.  For the 12 and 7-bit rotations,
-  * the only choices are (a) and (b).  We use (a) since it takes two-thirds the
-  * cycles of (b) on both Cortex-A7 and Cortex-A53.
-  *
-  * For the 16-bit rotation, we use vrev32.16 since it's consistently fastest
-  * and doesn't need a temporary register.
-  *
-  * For the 8-bit rotation, we use vtbl.8 + vtbl.8.  On Cortex-A7, this sequence
-  * is twice as fast as (a), even when doing (a) on multiple registers
-  * simultaneously to eliminate the stall between vshl and vsri.  Also, it
-  * parallelizes better when temporary registers are scarce.
-  *
-  * A disadvantage is that on Cortex-A53, the vtbl sequence is the same speed as
-  * (a), so the need to load the rotation table actually makes the vtbl method
-  * slightly slower overall on that CPU (~1.3% slower ChaCha20).  Still, it
-  * seems to be a good compromise to get a more significant speed boost on some
-  * CPUs, e.g. ~4.8% faster ChaCha20 on Cortex-A7.
-  */
-
-#include <linux/linkage.h>
-#include <asm/cache.h>
-
-	.text
-	.fpu		neon
-	.align		5
-
-/*
- * chacha_permute - permute one block
- *
- * Permute one 64-byte block where the state matrix is stored in the four NEON
- * registers q0-q3.  It performs matrix operations on four words in parallel,
- * but requires shuffling to rearrange the words after each round.
- *
- * The round count is given in r3.
- *
- * Clobbers: r3, ip, q4-q5
- */
-chacha_permute:
-
-	adr		ip, .Lrol8_table
-	vld1.8		{d10}, [ip, :64]
-
-.Ldoubleround:
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 16)
-	vadd.i32	q0, q0, q1
-	veor		q3, q3, q0
-	vrev32.16	q3, q3
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 12)
-	vadd.i32	q2, q2, q3
-	veor		q4, q1, q2
-	vshl.u32	q1, q4, #12
-	vsri.u32	q1, q4, #20
-
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 8)
-	vadd.i32	q0, q0, q1
-	veor		q3, q3, q0
-	vtbl.8		d6, {d6}, d10
-	vtbl.8		d7, {d7}, d10
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 7)
-	vadd.i32	q2, q2, q3
-	veor		q4, q1, q2
-	vshl.u32	q1, q4, #7
-	vsri.u32	q1, q4, #25
-
-	// x1 = shuffle32(x1, MASK(0, 3, 2, 1))
-	vext.8		q1, q1, q1, #4
-	// x2 = shuffle32(x2, MASK(1, 0, 3, 2))
-	vext.8		q2, q2, q2, #8
-	// x3 = shuffle32(x3, MASK(2, 1, 0, 3))
-	vext.8		q3, q3, q3, #12
-
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 16)
-	vadd.i32	q0, q0, q1
-	veor		q3, q3, q0
-	vrev32.16	q3, q3
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 12)
-	vadd.i32	q2, q2, q3
-	veor		q4, q1, q2
-	vshl.u32	q1, q4, #12
-	vsri.u32	q1, q4, #20
-
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 8)
-	vadd.i32	q0, q0, q1
-	veor		q3, q3, q0
-	vtbl.8		d6, {d6}, d10
-	vtbl.8		d7, {d7}, d10
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 7)
-	vadd.i32	q2, q2, q3
-	veor		q4, q1, q2
-	vshl.u32	q1, q4, #7
-	vsri.u32	q1, q4, #25
-
-	// x1 = shuffle32(x1, MASK(2, 1, 0, 3))
-	vext.8		q1, q1, q1, #12
-	// x2 = shuffle32(x2, MASK(1, 0, 3, 2))
-	vext.8		q2, q2, q2, #8
-	// x3 = shuffle32(x3, MASK(0, 3, 2, 1))
-	vext.8		q3, q3, q3, #4
-
-	subs		r3, r3, #2
-	bne		.Ldoubleround
-
-	bx		lr
-ENDPROC(chacha_permute)
-
-ENTRY(chacha_block_xor_neon)
-	// r0: Input state matrix, s
-	// r1: 1 data block output, o
-	// r2: 1 data block input, i
-	// r3: nrounds
-	push		{lr}
-
-	// x0..3 = s0..3
-	add		ip, r0, #0x20
-	vld1.32		{q0-q1}, [r0]
-	vld1.32		{q2-q3}, [ip]
-
-	vmov		q8, q0
-	vmov		q9, q1
-	vmov		q10, q2
-	vmov		q11, q3
-
-	bl		chacha_permute
-
-	add		ip, r2, #0x20
-	vld1.8		{q4-q5}, [r2]
-	vld1.8		{q6-q7}, [ip]
-
-	// o0 = i0 ^ (x0 + s0)
-	vadd.i32	q0, q0, q8
-	veor		q0, q0, q4
-
-	// o1 = i1 ^ (x1 + s1)
-	vadd.i32	q1, q1, q9
-	veor		q1, q1, q5
-
-	// o2 = i2 ^ (x2 + s2)
-	vadd.i32	q2, q2, q10
-	veor		q2, q2, q6
-
-	// o3 = i3 ^ (x3 + s3)
-	vadd.i32	q3, q3, q11
-	veor		q3, q3, q7
-
-	add		ip, r1, #0x20
-	vst1.8		{q0-q1}, [r1]
-	vst1.8		{q2-q3}, [ip]
-
-	pop		{pc}
-ENDPROC(chacha_block_xor_neon)
-
-ENTRY(hchacha_block_neon)
-	// r0: Input state matrix, s
-	// r1: output (8 32-bit words)
-	// r2: nrounds
-	push		{lr}
-
-	vld1.32		{q0-q1}, [r0]!
-	vld1.32		{q2-q3}, [r0]
-
-	mov		r3, r2
-	bl		chacha_permute
-
-	vst1.32		{q0}, [r1]!
-	vst1.32		{q3}, [r1]
-
-	pop		{pc}
-ENDPROC(hchacha_block_neon)
-
-	.align		4
-.Lctrinc:	.word	0, 1, 2, 3
-.Lrol8_table:	.byte	3, 0, 1, 2, 7, 4, 5, 6
-
-	.align		5
-ENTRY(chacha_4block_xor_neon)
-	push		{r4, lr}
-	mov		r4, sp			// preserve the stack pointer
-	sub		ip, sp, #0x20		// allocate a 32 byte buffer
-	bic		ip, ip, #0x1f		// aligned to 32 bytes
-	mov		sp, ip
-
-	// r0: Input state matrix, s
-	// r1: 4 data blocks output, o
-	// r2: 4 data blocks input, i
-	// r3: nrounds
-
-	//
-	// This function encrypts four consecutive ChaCha blocks by loading
-	// the state matrix in NEON registers four times. The algorithm performs
-	// each operation on the corresponding word of each state matrix, hence
-	// requires no word shuffling. The words are re-interleaved before the
-	// final addition of the original state and the XORing step.
-	//
-
-	// x0..15[0-3] = s0..15[0-3]
-	add		ip, r0, #0x20
-	vld1.32		{q0-q1}, [r0]
-	vld1.32		{q2-q3}, [ip]
-
-	adr		lr, .Lctrinc
-	vdup.32		q15, d7[1]
-	vdup.32		q14, d7[0]
-	vld1.32		{q4}, [lr, :128]
-	vdup.32		q13, d6[1]
-	vdup.32		q12, d6[0]
-	vdup.32		q11, d5[1]
-	vdup.32		q10, d5[0]
-	vadd.u32	q12, q12, q4		// x12 += counter values 0-3
-	vdup.32		q9, d4[1]
-	vdup.32		q8, d4[0]
-	vdup.32		q7, d3[1]
-	vdup.32		q6, d3[0]
-	vdup.32		q5, d2[1]
-	vdup.32		q4, d2[0]
-	vdup.32		q3, d1[1]
-	vdup.32		q2, d1[0]
-	vdup.32		q1, d0[1]
-	vdup.32		q0, d0[0]
-
-	adr		ip, .Lrol8_table
-	b		1f
-
-.Ldoubleround4:
-	vld1.32		{q8-q9}, [sp, :256]
-1:
-	// x0 += x4, x12 = rotl32(x12 ^ x0, 16)
-	// x1 += x5, x13 = rotl32(x13 ^ x1, 16)
-	// x2 += x6, x14 = rotl32(x14 ^ x2, 16)
-	// x3 += x7, x15 = rotl32(x15 ^ x3, 16)
-	vadd.i32	q0, q0, q4
-	vadd.i32	q1, q1, q5
-	vadd.i32	q2, q2, q6
-	vadd.i32	q3, q3, q7
-
-	veor		q12, q12, q0
-	veor		q13, q13, q1
-	veor		q14, q14, q2
-	veor		q15, q15, q3
-
-	vrev32.16	q12, q12
-	vrev32.16	q13, q13
-	vrev32.16	q14, q14
-	vrev32.16	q15, q15
-
-	// x8 += x12, x4 = rotl32(x4 ^ x8, 12)
-	// x9 += x13, x5 = rotl32(x5 ^ x9, 12)
-	// x10 += x14, x6 = rotl32(x6 ^ x10, 12)
-	// x11 += x15, x7 = rotl32(x7 ^ x11, 12)
-	vadd.i32	q8, q8, q12
-	vadd.i32	q9, q9, q13
-	vadd.i32	q10, q10, q14
-	vadd.i32	q11, q11, q15
-
-	vst1.32		{q8-q9}, [sp, :256]
-
-	veor		q8, q4, q8
-	veor		q9, q5, q9
-	vshl.u32	q4, q8, #12
-	vshl.u32	q5, q9, #12
-	vsri.u32	q4, q8, #20
-	vsri.u32	q5, q9, #20
-
-	veor		q8, q6, q10
-	veor		q9, q7, q11
-	vshl.u32	q6, q8, #12
-	vshl.u32	q7, q9, #12
-	vsri.u32	q6, q8, #20
-	vsri.u32	q7, q9, #20
-
-	// x0 += x4, x12 = rotl32(x12 ^ x0, 8)
-	// x1 += x5, x13 = rotl32(x13 ^ x1, 8)
-	// x2 += x6, x14 = rotl32(x14 ^ x2, 8)
-	// x3 += x7, x15 = rotl32(x15 ^ x3, 8)
-	vld1.8		{d16}, [ip, :64]
-	vadd.i32	q0, q0, q4
-	vadd.i32	q1, q1, q5
-	vadd.i32	q2, q2, q6
-	vadd.i32	q3, q3, q7
-
-	veor		q12, q12, q0
-	veor		q13, q13, q1
-	veor		q14, q14, q2
-	veor		q15, q15, q3
-
-	vtbl.8		d24, {d24}, d16
-	vtbl.8		d25, {d25}, d16
-	vtbl.8		d26, {d26}, d16
-	vtbl.8		d27, {d27}, d16
-	vtbl.8		d28, {d28}, d16
-	vtbl.8		d29, {d29}, d16
-	vtbl.8		d30, {d30}, d16
-	vtbl.8		d31, {d31}, d16
-
-	vld1.32		{q8-q9}, [sp, :256]
-
-	// x8 += x12, x4 = rotl32(x4 ^ x8, 7)
-	// x9 += x13, x5 = rotl32(x5 ^ x9, 7)
-	// x10 += x14, x6 = rotl32(x6 ^ x10, 7)
-	// x11 += x15, x7 = rotl32(x7 ^ x11, 7)
-	vadd.i32	q8, q8, q12
-	vadd.i32	q9, q9, q13
-	vadd.i32	q10, q10, q14
-	vadd.i32	q11, q11, q15
-
-	vst1.32		{q8-q9}, [sp, :256]
-
-	veor		q8, q4, q8
-	veor		q9, q5, q9
-	vshl.u32	q4, q8, #7
-	vshl.u32	q5, q9, #7
-	vsri.u32	q4, q8, #25
-	vsri.u32	q5, q9, #25
-
-	veor		q8, q6, q10
-	veor		q9, q7, q11
-	vshl.u32	q6, q8, #7
-	vshl.u32	q7, q9, #7
-	vsri.u32	q6, q8, #25
-	vsri.u32	q7, q9, #25
-
-	vld1.32		{q8-q9}, [sp, :256]
-
-	// x0 += x5, x15 = rotl32(x15 ^ x0, 16)
-	// x1 += x6, x12 = rotl32(x12 ^ x1, 16)
-	// x2 += x7, x13 = rotl32(x13 ^ x2, 16)
-	// x3 += x4, x14 = rotl32(x14 ^ x3, 16)
-	vadd.i32	q0, q0, q5
-	vadd.i32	q1, q1, q6
-	vadd.i32	q2, q2, q7
-	vadd.i32	q3, q3, q4
-
-	veor		q15, q15, q0
-	veor		q12, q12, q1
-	veor		q13, q13, q2
-	veor		q14, q14, q3
-
-	vrev32.16	q15, q15
-	vrev32.16	q12, q12
-	vrev32.16	q13, q13
-	vrev32.16	q14, q14
-
-	// x10 += x15, x5 = rotl32(x5 ^ x10, 12)
-	// x11 += x12, x6 = rotl32(x6 ^ x11, 12)
-	// x8 += x13, x7 = rotl32(x7 ^ x8, 12)
-	// x9 += x14, x4 = rotl32(x4 ^ x9, 12)
-	vadd.i32	q10, q10, q15
-	vadd.i32	q11, q11, q12
-	vadd.i32	q8, q8, q13
-	vadd.i32	q9, q9, q14
-
-	vst1.32		{q8-q9}, [sp, :256]
-
-	veor		q8, q7, q8
-	veor		q9, q4, q9
-	vshl.u32	q7, q8, #12
-	vshl.u32	q4, q9, #12
-	vsri.u32	q7, q8, #20
-	vsri.u32	q4, q9, #20
-
-	veor		q8, q5, q10
-	veor		q9, q6, q11
-	vshl.u32	q5, q8, #12
-	vshl.u32	q6, q9, #12
-	vsri.u32	q5, q8, #20
-	vsri.u32	q6, q9, #20
-
-	// x0 += x5, x15 = rotl32(x15 ^ x0, 8)
-	// x1 += x6, x12 = rotl32(x12 ^ x1, 8)
-	// x2 += x7, x13 = rotl32(x13 ^ x2, 8)
-	// x3 += x4, x14 = rotl32(x14 ^ x3, 8)
-	vld1.8		{d16}, [ip, :64]
-	vadd.i32	q0, q0, q5
-	vadd.i32	q1, q1, q6
-	vadd.i32	q2, q2, q7
-	vadd.i32	q3, q3, q4
-
-	veor		q15, q15, q0
-	veor		q12, q12, q1
-	veor		q13, q13, q2
-	veor		q14, q14, q3
-
-	vtbl.8		d30, {d30}, d16
-	vtbl.8		d31, {d31}, d16
-	vtbl.8		d24, {d24}, d16
-	vtbl.8		d25, {d25}, d16
-	vtbl.8		d26, {d26}, d16
-	vtbl.8		d27, {d27}, d16
-	vtbl.8		d28, {d28}, d16
-	vtbl.8		d29, {d29}, d16
-
-	vld1.32		{q8-q9}, [sp, :256]
-
-	// x10 += x15, x5 = rotl32(x5 ^ x10, 7)
-	// x11 += x12, x6 = rotl32(x6 ^ x11, 7)
-	// x8 += x13, x7 = rotl32(x7 ^ x8, 7)
-	// x9 += x14, x4 = rotl32(x4 ^ x9, 7)
-	vadd.i32	q10, q10, q15
-	vadd.i32	q11, q11, q12
-	vadd.i32	q8, q8, q13
-	vadd.i32	q9, q9, q14
-
-	vst1.32		{q8-q9}, [sp, :256]
-
-	veor		q8, q7, q8
-	veor		q9, q4, q9
-	vshl.u32	q7, q8, #7
-	vshl.u32	q4, q9, #7
-	vsri.u32	q7, q8, #25
-	vsri.u32	q4, q9, #25
-
-	veor		q8, q5, q10
-	veor		q9, q6, q11
-	vshl.u32	q5, q8, #7
-	vshl.u32	q6, q9, #7
-	vsri.u32	q5, q8, #25
-	vsri.u32	q6, q9, #25
-
-	subs		r3, r3, #2
-	bne		.Ldoubleround4
-
-	// x0..7[0-3] are in q0-q7, x10..15[0-3] are in q10-q15.
-	// x8..9[0-3] are on the stack.
-
-	// Re-interleave the words in the first two rows of each block (x0..7).
-	// Also add the counter values 0-3 to x12[0-3].
-	  vld1.32	{q8}, [lr, :128]	// load counter values 0-3
-	vzip.32		q0, q1			// => (0 1 0 1) (0 1 0 1)
-	vzip.32		q2, q3			// => (2 3 2 3) (2 3 2 3)
-	vzip.32		q4, q5			// => (4 5 4 5) (4 5 4 5)
-	vzip.32		q6, q7			// => (6 7 6 7) (6 7 6 7)
-	  vadd.u32	q12, q8			// x12 += counter values 0-3
-	vswp		d1, d4
-	vswp		d3, d6
-	  vld1.32	{q8-q9}, [r0]!		// load s0..7
-	vswp		d9, d12
-	vswp		d11, d14
-
-	// Swap q1 and q4 so that we'll free up consecutive registers (q0-q1)
-	// after XORing the first 32 bytes.
-	vswp		q1, q4
-
-	// First two rows of each block are (q0 q1) (q2 q6) (q4 q5) (q3 q7)
-
-	// x0..3[0-3] += s0..3[0-3]	(add orig state to 1st row of each block)
-	vadd.u32	q0, q0, q8
-	vadd.u32	q2, q2, q8
-	vadd.u32	q4, q4, q8
-	vadd.u32	q3, q3, q8
-
-	// x4..7[0-3] += s4..7[0-3]	(add orig state to 2nd row of each block)
-	vadd.u32	q1, q1, q9
-	vadd.u32	q6, q6, q9
-	vadd.u32	q5, q5, q9
-	vadd.u32	q7, q7, q9
-
-	// XOR first 32 bytes using keystream from first two rows of first block
-	vld1.8		{q8-q9}, [r2]!
-	veor		q8, q8, q0
-	veor		q9, q9, q1
-	vst1.8		{q8-q9}, [r1]!
-
-	// Re-interleave the words in the last two rows of each block (x8..15).
-	vld1.32		{q8-q9}, [sp, :256]
-	  mov		sp, r4		// restore original stack pointer
-	  ldr		r4, [r4, #8]	// load number of bytes
-	vzip.32		q12, q13	// => (12 13 12 13) (12 13 12 13)
-	vzip.32		q14, q15	// => (14 15 14 15) (14 15 14 15)
-	vzip.32		q8, q9		// => (8 9 8 9) (8 9 8 9)
-	vzip.32		q10, q11	// => (10 11 10 11) (10 11 10 11)
-	  vld1.32	{q0-q1}, [r0]	// load s8..15
-	vswp		d25, d28
-	vswp		d27, d30
-	vswp		d17, d20
-	vswp		d19, d22
-
-	// Last two rows of each block are (q8 q12) (q10 q14) (q9 q13) (q11 q15)
-
-	// x8..11[0-3] += s8..11[0-3]	(add orig state to 3rd row of each block)
-	vadd.u32	q8,  q8,  q0
-	vadd.u32	q10, q10, q0
-	vadd.u32	q9,  q9,  q0
-	vadd.u32	q11, q11, q0
-
-	// x12..15[0-3] += s12..15[0-3] (add orig state to 4th row of each block)
-	vadd.u32	q12, q12, q1
-	vadd.u32	q14, q14, q1
-	vadd.u32	q13, q13, q1
-	vadd.u32	q15, q15, q1
-
-	// XOR the rest of the data with the keystream
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #96
-	veor		q0, q0, q8
-	veor		q1, q1, q12
-	ble		.Lle96
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #32
-	veor		q0, q0, q2
-	veor		q1, q1, q6
-	ble		.Lle128
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #32
-	veor		q0, q0, q10
-	veor		q1, q1, q14
-	ble		.Lle160
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #32
-	veor		q0, q0, q4
-	veor		q1, q1, q5
-	ble		.Lle192
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #32
-	veor		q0, q0, q9
-	veor		q1, q1, q13
-	ble		.Lle224
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]!
-	subs		r4, r4, #32
-	veor		q0, q0, q3
-	veor		q1, q1, q7
-	blt		.Llt256
-.Lout:
-	vst1.8		{q0-q1}, [r1]!
-
-	vld1.8		{q0-q1}, [r2]
-	veor		q0, q0, q11
-	veor		q1, q1, q15
-	vst1.8		{q0-q1}, [r1]
-
-	pop		{r4, pc}
-
-.Lle192:
-	vmov		q4, q9
-	vmov		q5, q13
-
-.Lle160:
-	// nothing to do
-
-.Lfinalblock:
-	// Process the final block if processing less than 4 full blocks.
-	// Entered with 32 bytes of ChaCha cipher stream in q4-q5, and the
-	// previous 32 byte output block that still needs to be written at
-	// [r1] in q0-q1.
-	beq		.Lfullblock
-
-.Lpartialblock:
-	adr		lr, .Lpermute + 32
-	add		r2, r2, r4
-	add		lr, lr, r4
-	add		r4, r4, r1
-
-	vld1.8		{q2-q3}, [lr]
-	vld1.8		{q6-q7}, [r2]
-
-	add		r4, r4, #32
-
-	vtbl.8		d4, {q4-q5}, d4
-	vtbl.8		d5, {q4-q5}, d5
-	vtbl.8		d6, {q4-q5}, d6
-	vtbl.8		d7, {q4-q5}, d7
-
-	veor		q6, q6, q2
-	veor		q7, q7, q3
-
-	vst1.8		{q6-q7}, [r4]	// overlapping stores
-	vst1.8		{q0-q1}, [r1]
-	pop		{r4, pc}
-
-.Lfullblock:
-	vmov		q11, q4
-	vmov		q15, q5
-	b		.Lout
-.Lle96:
-	vmov		q4, q2
-	vmov		q5, q6
-	b		.Lfinalblock
-.Lle128:
-	vmov		q4, q10
-	vmov		q5, q14
-	b		.Lfinalblock
-.Lle224:
-	vmov		q4, q3
-	vmov		q5, q7
-	b		.Lfinalblock
-.Llt256:
-	vmov		q4, q11
-	vmov		q5, q15
-	b		.Lpartialblock
-ENDPROC(chacha_4block_xor_neon)
-
-	.align		L1_CACHE_SHIFT
-.Lpermute:
-	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
-	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
-	.byte		0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17
-	.byte		0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
-	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
-	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
-	.byte		0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17
-	.byte		0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
diff --git a/arch/arm/crypto/chacha-scalar-core.S b/arch/arm/crypto/chacha-scalar-core.S
deleted file mode 100644
index 083fe1ab96d0..000000000000
--- a/arch/arm/crypto/chacha-scalar-core.S
+++ /dev/null
@@ -1,443 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2018 Google, Inc.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Design notes:
- *
- * 16 registers would be needed to hold the state matrix, but only 14 are
- * available because 'sp' and 'pc' cannot be used.  So we spill the elements
- * (x8, x9) to the stack and swap them out with (x10, x11).  This adds one
- * 'ldrd' and one 'strd' instruction per round.
- *
- * All rotates are performed using the implicit rotate operand accepted by the
- * 'add' and 'eor' instructions.  This is faster than using explicit rotate
- * instructions.  To make this work, we allow the values in the second and last
- * rows of the ChaCha state matrix (rows 'b' and 'd') to temporarily have the
- * wrong rotation amount.  The rotation amount is then fixed up just in time
- * when the values are used.  'brot' is the number of bits the values in row 'b'
- * need to be rotated right to arrive at the correct values, and 'drot'
- * similarly for row 'd'.  (brot, drot) start out as (0, 0) but we make it such
- * that they end up as (25, 24) after every round.
- */
-
-	// ChaCha state registers
-	X0	.req	r0
-	X1	.req	r1
-	X2	.req	r2
-	X3	.req	r3
-	X4	.req	r4
-	X5	.req	r5
-	X6	.req	r6
-	X7	.req	r7
-	X8_X10	.req	r8	// shared by x8 and x10
-	X9_X11	.req	r9	// shared by x9 and x11
-	X12	.req	r10
-	X13	.req	r11
-	X14	.req	r12
-	X15	.req	r14
-
-.macro _le32_bswap_4x	a, b, c, d,  tmp
-#ifdef __ARMEB__
-	rev_l		\a,  \tmp
-	rev_l		\b,  \tmp
-	rev_l		\c,  \tmp
-	rev_l		\d,  \tmp
-#endif
-.endm
-
-.macro __ldrd		a, b, src, offset
-#if __LINUX_ARM_ARCH__ >= 6
-	ldrd		\a, \b, [\src, #\offset]
-#else
-	ldr		\a, [\src, #\offset]
-	ldr		\b, [\src, #\offset + 4]
-#endif
-.endm
-
-.macro __strd		a, b, dst, offset
-#if __LINUX_ARM_ARCH__ >= 6
-	strd		\a, \b, [\dst, #\offset]
-#else
-	str		\a, [\dst, #\offset]
-	str		\b, [\dst, #\offset + 4]
-#endif
-.endm
-
-.macro _halfround	a1, b1, c1, d1,  a2, b2, c2, d2
-
-	// a += b; d ^= a; d = rol(d, 16);
-	add		\a1, \a1, \b1, ror #brot
-	add		\a2, \a2, \b2, ror #brot
-	eor		\d1, \a1, \d1, ror #drot
-	eor		\d2, \a2, \d2, ror #drot
-	// drot == 32 - 16 == 16
-
-	// c += d; b ^= c; b = rol(b, 12);
-	add		\c1, \c1, \d1, ror #16
-	add		\c2, \c2, \d2, ror #16
-	eor		\b1, \c1, \b1, ror #brot
-	eor		\b2, \c2, \b2, ror #brot
-	// brot == 32 - 12 == 20
-
-	// a += b; d ^= a; d = rol(d, 8);
-	add		\a1, \a1, \b1, ror #20
-	add		\a2, \a2, \b2, ror #20
-	eor		\d1, \a1, \d1, ror #16
-	eor		\d2, \a2, \d2, ror #16
-	// drot == 32 - 8 == 24
-
-	// c += d; b ^= c; b = rol(b, 7);
-	add		\c1, \c1, \d1, ror #24
-	add		\c2, \c2, \d2, ror #24
-	eor		\b1, \c1, \b1, ror #20
-	eor		\b2, \c2, \b2, ror #20
-	// brot == 32 - 7 == 25
-.endm
-
-.macro _doubleround
-
-	// column round
-
-	// quarterrounds: (x0, x4, x8, x12) and (x1, x5, x9, x13)
-	_halfround	X0, X4, X8_X10, X12,  X1, X5, X9_X11, X13
-
-	// save (x8, x9); restore (x10, x11)
-	__strd		X8_X10, X9_X11, sp, 0
-	__ldrd		X8_X10, X9_X11, sp, 8
-
-	// quarterrounds: (x2, x6, x10, x14) and (x3, x7, x11, x15)
-	_halfround	X2, X6, X8_X10, X14,  X3, X7, X9_X11, X15
-
-	.set brot, 25
-	.set drot, 24
-
-	// diagonal round
-
-	// quarterrounds: (x0, x5, x10, x15) and (x1, x6, x11, x12)
-	_halfround	X0, X5, X8_X10, X15,  X1, X6, X9_X11, X12
-
-	// save (x10, x11); restore (x8, x9)
-	__strd		X8_X10, X9_X11, sp, 8
-	__ldrd		X8_X10, X9_X11, sp, 0
-
-	// quarterrounds: (x2, x7, x8, x13) and (x3, x4, x9, x14)
-	_halfround	X2, X7, X8_X10, X13,  X3, X4, X9_X11, X14
-.endm
-
-.macro _chacha_permute	nrounds
-	.set brot, 0
-	.set drot, 0
-	.rept \nrounds / 2
-	 _doubleround
-	.endr
-.endm
-
-.macro _chacha		nrounds
-
-.Lnext_block\@:
-	// Stack: unused0-unused1 x10-x11 x0-x15 OUT IN LEN
-	// Registers contain x0-x9,x12-x15.
-
-	// Do the core ChaCha permutation to update x0-x15.
-	_chacha_permute	\nrounds
-
-	add		sp, #8
-	// Stack: x10-x11 orig_x0-orig_x15 OUT IN LEN
-	// Registers contain x0-x9,x12-x15.
-	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
-
-	// Free up some registers (r8-r12,r14) by pushing (x8-x9,x12-x15).
-	push		{X8_X10, X9_X11, X12, X13, X14, X15}
-
-	// Load (OUT, IN, LEN).
-	ldr		r14, [sp, #96]
-	ldr		r12, [sp, #100]
-	ldr		r11, [sp, #104]
-
-	orr		r10, r14, r12
-
-	// Use slow path if fewer than 64 bytes remain.
-	cmp		r11, #64
-	blt		.Lxor_slowpath\@
-
-	// Use slow path if IN and/or OUT isn't 4-byte aligned.  Needed even on
-	// ARMv6+, since ldmia and stmia (used below) still require alignment.
-	tst		r10, #3
-	bne		.Lxor_slowpath\@
-
-	// Fast path: XOR 64 bytes of aligned data.
-
-	// Stack: x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN
-	// Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is OUT.
-	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
-
-	// x0-x3
-	__ldrd		r8, r9, sp, 32
-	__ldrd		r10, r11, sp, 40
-	add		X0, X0, r8
-	add		X1, X1, r9
-	add		X2, X2, r10
-	add		X3, X3, r11
-	_le32_bswap_4x	X0, X1, X2, X3,  r8
-	ldmia		r12!, {r8-r11}
-	eor		X0, X0, r8
-	eor		X1, X1, r9
-	eor		X2, X2, r10
-	eor		X3, X3, r11
-	stmia		r14!, {X0-X3}
-
-	// x4-x7
-	__ldrd		r8, r9, sp, 48
-	__ldrd		r10, r11, sp, 56
-	add		X4, r8, X4, ror #brot
-	add		X5, r9, X5, ror #brot
-	ldmia		r12!, {X0-X3}
-	add		X6, r10, X6, ror #brot
-	add		X7, r11, X7, ror #brot
-	_le32_bswap_4x	X4, X5, X6, X7,  r8
-	eor		X4, X4, X0
-	eor		X5, X5, X1
-	eor		X6, X6, X2
-	eor		X7, X7, X3
-	stmia		r14!, {X4-X7}
-
-	// x8-x15
-	pop		{r0-r7}			// (x8-x9,x12-x15,x10-x11)
-	__ldrd		r8, r9, sp, 32
-	__ldrd		r10, r11, sp, 40
-	add		r0, r0, r8		// x8
-	add		r1, r1, r9		// x9
-	add		r6, r6, r10		// x10
-	add		r7, r7, r11		// x11
-	_le32_bswap_4x	r0, r1, r6, r7,  r8
-	ldmia		r12!, {r8-r11}
-	eor		r0, r0, r8		// x8
-	eor		r1, r1, r9		// x9
-	eor		r6, r6, r10		// x10
-	eor		r7, r7, r11		// x11
-	stmia		r14!, {r0,r1,r6,r7}
-	ldmia		r12!, {r0,r1,r6,r7}
-	__ldrd		r8, r9, sp, 48
-	__ldrd		r10, r11, sp, 56
-	add		r2, r8, r2, ror #drot	// x12
-	add		r3, r9, r3, ror #drot	// x13
-	add		r4, r10, r4, ror #drot	// x14
-	add		r5, r11, r5, ror #drot	// x15
-	_le32_bswap_4x	r2, r3, r4, r5,  r9
-	  ldr		r9, [sp, #72]		// load LEN
-	eor		r2, r2, r0		// x12
-	eor		r3, r3, r1		// x13
-	eor		r4, r4, r6		// x14
-	eor		r5, r5, r7		// x15
-	  subs		r9, #64			// decrement and check LEN
-	stmia		r14!, {r2-r5}
-
-	beq		.Ldone\@
-
-.Lprepare_for_next_block\@:
-
-	// Stack: x0-x15 OUT IN LEN
-
-	// Increment block counter (x12)
-	add		r8, #1
-
-	// Store updated (OUT, IN, LEN)
-	str		r14, [sp, #64]
-	str		r12, [sp, #68]
-	str		r9, [sp, #72]
-
-	  mov		r14, sp
-
-	// Store updated block counter (x12)
-	str		r8, [sp, #48]
-
-	  sub		sp, #16
-
-	// Reload state and do next block
-	ldmia		r14!, {r0-r11}		// load x0-x11
-	__strd		r10, r11, sp, 8		// store x10-x11 before state
-	ldmia		r14, {r10-r12,r14}	// load x12-x15
-	b		.Lnext_block\@
-
-.Lxor_slowpath\@:
-	// Slow path: < 64 bytes remaining, or unaligned input or output buffer.
-	// We handle it by storing the 64 bytes of keystream to the stack, then
-	// XOR-ing the needed portion with the data.
-
-	// Allocate keystream buffer
-	sub		sp, #64
-	mov		r14, sp
-
-	// Stack: ks0-ks15 x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN
-	// Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is &ks0.
-	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
-
-	// Save keystream for x0-x3
-	__ldrd		r8, r9, sp, 96
-	__ldrd		r10, r11, sp, 104
-	add		X0, X0, r8
-	add		X1, X1, r9
-	add		X2, X2, r10
-	add		X3, X3, r11
-	_le32_bswap_4x	X0, X1, X2, X3,  r8
-	stmia		r14!, {X0-X3}
-
-	// Save keystream for x4-x7
-	__ldrd		r8, r9, sp, 112
-	__ldrd		r10, r11, sp, 120
-	add		X4, r8, X4, ror #brot
-	add		X5, r9, X5, ror #brot
-	add		X6, r10, X6, ror #brot
-	add		X7, r11, X7, ror #brot
-	_le32_bswap_4x	X4, X5, X6, X7,  r8
-	  add		r8, sp, #64
-	stmia		r14!, {X4-X7}
-
-	// Save keystream for x8-x15
-	ldm		r8, {r0-r7}		// (x8-x9,x12-x15,x10-x11)
-	__ldrd		r8, r9, sp, 128
-	__ldrd		r10, r11, sp, 136
-	add		r0, r0, r8		// x8
-	add		r1, r1, r9		// x9
-	add		r6, r6, r10		// x10
-	add		r7, r7, r11		// x11
-	_le32_bswap_4x	r0, r1, r6, r7,  r8
-	stmia		r14!, {r0,r1,r6,r7}
-	__ldrd		r8, r9, sp, 144
-	__ldrd		r10, r11, sp, 152
-	add		r2, r8, r2, ror #drot	// x12
-	add		r3, r9, r3, ror #drot	// x13
-	add		r4, r10, r4, ror #drot	// x14
-	add		r5, r11, r5, ror #drot	// x15
-	_le32_bswap_4x	r2, r3, r4, r5,  r9
-	stmia		r14, {r2-r5}
-
-	// Stack: ks0-ks15 unused0-unused7 x0-x15 OUT IN LEN
-	// Registers: r8 is block counter, r12 is IN.
-
-	ldr		r9, [sp, #168]		// LEN
-	ldr		r14, [sp, #160]		// OUT
-	cmp		r9, #64
-	  mov		r0, sp
-	movle		r1, r9
-	movgt		r1, #64
-	// r1 is number of bytes to XOR, in range [1, 64]
-
-.if __LINUX_ARM_ARCH__ < 6
-	orr		r2, r12, r14
-	tst		r2, #3			// IN or OUT misaligned?
-	bne		.Lxor_next_byte\@
-.endif
-
-	// XOR a word at a time
-.rept 16
-	subs		r1, #4
-	blt		.Lxor_words_done\@
-	ldr		r2, [r12], #4
-	ldr		r3, [r0], #4
-	eor		r2, r2, r3
-	str		r2, [r14], #4
-.endr
-	b		.Lxor_slowpath_done\@
-.Lxor_words_done\@:
-	ands		r1, r1, #3
-	beq		.Lxor_slowpath_done\@
-
-	// XOR a byte at a time
-.Lxor_next_byte\@:
-	ldrb		r2, [r12], #1
-	ldrb		r3, [r0], #1
-	eor		r2, r2, r3
-	strb		r2, [r14], #1
-	subs		r1, #1
-	bne		.Lxor_next_byte\@
-
-.Lxor_slowpath_done\@:
-	subs		r9, #64
-	add		sp, #96
-	bgt		.Lprepare_for_next_block\@
-
-.Ldone\@:
-.endm	// _chacha
-
-/*
- * void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
- *		     const u32 *state, int nrounds);
- */
-ENTRY(chacha_doarm)
-	cmp		r2, #0			// len == 0?
-	reteq		lr
-
-	ldr		ip, [sp]
-	cmp		ip, #12
-
-	push		{r0-r2,r4-r11,lr}
-
-	// Push state x0-x15 onto stack.
-	// Also store an extra copy of x10-x11 just before the state.
-
-	add		X12, r3, #48
-	ldm		X12, {X12,X13,X14,X15}
-	push		{X12,X13,X14,X15}
-	sub		sp, sp, #64
-
-	__ldrd		X8_X10, X9_X11, r3, 40
-	__strd		X8_X10, X9_X11, sp, 8
-	__strd		X8_X10, X9_X11, sp, 56
-	ldm		r3, {X0-X9_X11}
-	__strd		X0, X1, sp, 16
-	__strd		X2, X3, sp, 24
-	__strd		X4, X5, sp, 32
-	__strd		X6, X7, sp, 40
-	__strd		X8_X10, X9_X11, sp, 48
-
-	beq		1f
-	_chacha		20
-
-0:	add		sp, #76
-	pop		{r4-r11, pc}
-
-1:	_chacha		12
-	b		0b
-ENDPROC(chacha_doarm)
-
-/*
- * void hchacha_block_arm(const u32 state[16], u32 out[8], int nrounds);
- */
-ENTRY(hchacha_block_arm)
-	push		{r1,r4-r11,lr}
-
-	cmp		r2, #12			// ChaCha12 ?
-
-	mov		r14, r0
-	ldmia		r14!, {r0-r11}		// load x0-x11
-	push		{r10-r11}		// store x10-x11 to stack
-	ldm		r14, {r10-r12,r14}	// load x12-x15
-	sub		sp, #8
-
-	beq		1f
-	_chacha_permute	20
-
-	// Skip over (unused0-unused1, x10-x11)
-0:	add		sp, #16
-
-	// Fix up rotations of x12-x15
-	ror		X12, X12, #drot
-	ror		X13, X13, #drot
-	  pop		{r4}			// load 'out'
-	ror		X14, X14, #drot
-	ror		X15, X15, #drot
-
-	// Store (x0-x3,x12-x15) to 'out'
-	stm		r4, {X0,X1,X2,X3,X12,X13,X14,X15}
-
-	pop		{r4-r11,pc}
-
-1:	_chacha_permute	12
-	b		0b
-ENDPROC(hchacha_block_arm)
diff --git a/arch/arm/crypto/crc32-ce-core.S b/arch/arm/crypto/crc32-ce-core.S
deleted file mode 100644
index 88f9edf94e95..000000000000
--- a/arch/arm/crypto/crc32-ce-core.S
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions instructions
- *
- * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* GPL HEADER START
- *
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 only,
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License version 2 for more details (a copy is included
- * in the LICENSE file that accompanied this code).
- *
- * You should have received a copy of the GNU General Public License
- * version 2 along with this program; If not, see http://www.gnu.org/licenses
- *
- * Please  visit http://www.xyratex.com/contact if you need additional
- * information or have any questions.
- *
- * GPL HEADER END
- */
-
-/*
- * Copyright 2012 Xyratex Technology Limited
- *
- * Using hardware provided PCLMULQDQ instruction to accelerate the CRC32
- * calculation.
- * CRC32 polynomial:0x04c11db7(BE)/0xEDB88320(LE)
- * PCLMULQDQ is a new instruction in Intel SSE4.2, the reference can be found
- * at:
- * https://www.intel.com/products/processor/manuals/
- * Intel(R) 64 and IA-32 Architectures Software Developer's Manual
- * Volume 2B: Instruction Set Reference, N-Z
- *
- * Authors:   Gregory Prestas <Gregory_Prestas@us.xyratex.com>
- *	      Alexander Boyko <Alexander_Boyko@xyratex.com>
- */
-
-#include <linux/linkage.h>
-#include <linux/cfi_types.h>
-#include <asm/assembler.h>
-
-	.text
-	.align		6
-	.arch		armv8-a
-	.arch_extension	crc
-	.fpu		crypto-neon-fp-armv8
-
-.Lcrc32_constants:
-	/*
-	 * [x4*128+32 mod P(x) << 32)]'  << 1   = 0x154442bd4
-	 * #define CONSTANT_R1  0x154442bd4LL
-	 *
-	 * [(x4*128-32 mod P(x) << 32)]' << 1   = 0x1c6e41596
-	 * #define CONSTANT_R2  0x1c6e41596LL
-	 */
-	.quad		0x0000000154442bd4
-	.quad		0x00000001c6e41596
-
-	/*
-	 * [(x128+32 mod P(x) << 32)]'   << 1   = 0x1751997d0
-	 * #define CONSTANT_R3  0x1751997d0LL
-	 *
-	 * [(x128-32 mod P(x) << 32)]'   << 1   = 0x0ccaa009e
-	 * #define CONSTANT_R4  0x0ccaa009eLL
-	 */
-	.quad		0x00000001751997d0
-	.quad		0x00000000ccaa009e
-
-	/*
-	 * [(x64 mod P(x) << 32)]'       << 1   = 0x163cd6124
-	 * #define CONSTANT_R5  0x163cd6124LL
-	 */
-	.quad		0x0000000163cd6124
-	.quad		0x00000000FFFFFFFF
-
-	/*
-	 * #define CRCPOLY_TRUE_LE_FULL 0x1DB710641LL
-	 *
-	 * Barrett Reduction constant (u64`) = u` = (x**64 / P(x))`
-	 *                                                      = 0x1F7011641LL
-	 * #define CONSTANT_RU  0x1F7011641LL
-	 */
-	.quad		0x00000001DB710641
-	.quad		0x00000001F7011641
-
-.Lcrc32c_constants:
-	.quad		0x00000000740eef02
-	.quad		0x000000009e4addf8
-	.quad		0x00000000f20c0dfe
-	.quad		0x000000014cd00bd6
-	.quad		0x00000000dd45aab8
-	.quad		0x00000000FFFFFFFF
-	.quad		0x0000000105ec76f0
-	.quad		0x00000000dea713f1
-
-	dCONSTANTl	.req	d0
-	dCONSTANTh	.req	d1
-	qCONSTANT	.req	q0
-
-	BUF		.req	r0
-	LEN		.req	r1
-	CRC		.req	r2
-
-	qzr		.req	q9
-
-	/**
-	 * Calculate crc32
-	 * BUF - buffer
-	 * LEN - sizeof buffer (multiple of 16 bytes), LEN should be > 63
-	 * CRC - initial crc32
-	 * return %eax crc32
-	 * uint crc32_pmull_le(unsigned char const *buffer,
-	 *                     size_t len, uint crc32)
-	 */
-SYM_FUNC_START(crc32_pmull_le)
-	adr		r3, .Lcrc32_constants
-	b		0f
-SYM_FUNC_END(crc32_pmull_le)
-
-SYM_FUNC_START(crc32c_pmull_le)
-	adr		r3, .Lcrc32c_constants
-
-0:	bic		LEN, LEN, #15
-	vld1.8		{q1-q2}, [BUF, :128]!
-	vld1.8		{q3-q4}, [BUF, :128]!
-	vmov.i8		qzr, #0
-	vmov.i8		qCONSTANT, #0
-	vmov.32		dCONSTANTl[0], CRC
-	veor.8		d2, d2, dCONSTANTl
-	sub		LEN, LEN, #0x40
-	cmp		LEN, #0x40
-	blt		less_64
-
-	vld1.64		{qCONSTANT}, [r3]
-
-loop_64:		/* 64 bytes Full cache line folding */
-	sub		LEN, LEN, #0x40
-
-	vmull.p64	q5, d3, dCONSTANTh
-	vmull.p64	q6, d5, dCONSTANTh
-	vmull.p64	q7, d7, dCONSTANTh
-	vmull.p64	q8, d9, dCONSTANTh
-
-	vmull.p64	q1, d2, dCONSTANTl
-	vmull.p64	q2, d4, dCONSTANTl
-	vmull.p64	q3, d6, dCONSTANTl
-	vmull.p64	q4, d8, dCONSTANTl
-
-	veor.8		q1, q1, q5
-	vld1.8		{q5}, [BUF, :128]!
-	veor.8		q2, q2, q6
-	vld1.8		{q6}, [BUF, :128]!
-	veor.8		q3, q3, q7
-	vld1.8		{q7}, [BUF, :128]!
-	veor.8		q4, q4, q8
-	vld1.8		{q8}, [BUF, :128]!
-
-	veor.8		q1, q1, q5
-	veor.8		q2, q2, q6
-	veor.8		q3, q3, q7
-	veor.8		q4, q4, q8
-
-	cmp		LEN, #0x40
-	bge		loop_64
-
-less_64:		/* Folding cache line into 128bit */
-	vldr		dCONSTANTl, [r3, #16]
-	vldr		dCONSTANTh, [r3, #24]
-
-	vmull.p64	q5, d3, dCONSTANTh
-	vmull.p64	q1, d2, dCONSTANTl
-	veor.8		q1, q1, q5
-	veor.8		q1, q1, q2
-
-	vmull.p64	q5, d3, dCONSTANTh
-	vmull.p64	q1, d2, dCONSTANTl
-	veor.8		q1, q1, q5
-	veor.8		q1, q1, q3
-
-	vmull.p64	q5, d3, dCONSTANTh
-	vmull.p64	q1, d2, dCONSTANTl
-	veor.8		q1, q1, q5
-	veor.8		q1, q1, q4
-
-	teq		LEN, #0
-	beq		fold_64
-
-loop_16:		/* Folding rest buffer into 128bit */
-	subs		LEN, LEN, #0x10
-
-	vld1.8		{q2}, [BUF, :128]!
-	vmull.p64	q5, d3, dCONSTANTh
-	vmull.p64	q1, d2, dCONSTANTl
-	veor.8		q1, q1, q5
-	veor.8		q1, q1, q2
-
-	bne		loop_16
-
-fold_64:
-	/* perform the last 64 bit fold, also adds 32 zeroes
-	 * to the input stream */
-	vmull.p64	q2, d2, dCONSTANTh
-	vext.8		q1, q1, qzr, #8
-	veor.8		q1, q1, q2
-
-	/* final 32-bit fold */
-	vldr		dCONSTANTl, [r3, #32]
-	vldr		d6, [r3, #40]
-	vmov.i8		d7, #0
-
-	vext.8		q2, q1, qzr, #4
-	vand.8		d2, d2, d6
-	vmull.p64	q1, d2, dCONSTANTl
-	veor.8		q1, q1, q2
-
-	/* Finish up with the bit-reversed barrett reduction 64 ==> 32 bits */
-	vldr		dCONSTANTl, [r3, #48]
-	vldr		dCONSTANTh, [r3, #56]
-
-	vand.8		q2, q1, q3
-	vext.8		q2, qzr, q2, #8
-	vmull.p64	q2, d5, dCONSTANTh
-	vand.8		q2, q2, q3
-	vmull.p64	q2, d4, dCONSTANTl
-	veor.8		q1, q1, q2
-	vmov		r0, s5
-
-	bx		lr
-SYM_FUNC_END(crc32c_pmull_le)
-
-	.macro		__crc32, c
-	subs		ip, r2, #8
-	bmi		.Ltail\c
-
-	tst		r1, #3
-	bne		.Lunaligned\c
-
-	teq		ip, #0
-.Laligned8\c:
-	ldrd		r2, r3, [r1], #8
-ARM_BE8(rev		r2, r2		)
-ARM_BE8(rev		r3, r3		)
-	crc32\c\()w	r0, r0, r2
-	crc32\c\()w	r0, r0, r3
-	bxeq		lr
-	subs		ip, ip, #8
-	bpl		.Laligned8\c
-
-.Ltail\c:
-	tst		ip, #4
-	beq		2f
-	ldr		r3, [r1], #4
-ARM_BE8(rev		r3, r3		)
-	crc32\c\()w	r0, r0, r3
-
-2:	tst		ip, #2
-	beq		1f
-	ldrh		r3, [r1], #2
-ARM_BE8(rev16		r3, r3		)
-	crc32\c\()h	r0, r0, r3
-
-1:	tst		ip, #1
-	bxeq		lr
-	ldrb		r3, [r1]
-	crc32\c\()b	r0, r0, r3
-	bx		lr
-
-.Lunaligned\c:
-	tst		r1, #1
-	beq		2f
-	ldrb		r3, [r1], #1
-	subs		r2, r2, #1
-	crc32\c\()b	r0, r0, r3
-
-	tst		r1, #2
-	beq		0f
-2:	ldrh		r3, [r1], #2
-	subs		r2, r2, #2
-ARM_BE8(rev16		r3, r3		)
-	crc32\c\()h	r0, r0, r3
-
-0:	subs		ip, r2, #8
-	bpl		.Laligned8\c
-	b		.Ltail\c
-	.endm
-
-	.align		5
-SYM_TYPED_FUNC_START(crc32_armv8_le)
-	__crc32
-SYM_FUNC_END(crc32_armv8_le)
-
-	.align		5
-SYM_TYPED_FUNC_START(crc32c_armv8_le)
-	__crc32		c
-SYM_FUNC_END(crc32c_armv8_le)
diff --git a/arch/arm/crypto/crc32-ce-glue.c b/arch/arm/crypto/crc32-ce-glue.c
deleted file mode 100644
index 20b4dff13e3a..000000000000
--- a/arch/arm/crypto/crc32-ce-glue.c
+++ /dev/null
@@ -1,247 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions instructions
- *
- * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/cpufeature.h>
-#include <linux/crc32.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
-
-#define PMULL_MIN_LEN		64L	/* minimum size of buffer
-					 * for crc32_pmull_le_16 */
-#define SCALE_F			16L	/* size of NEON register */
-
-asmlinkage u32 crc32_pmull_le(const u8 buf[], u32 len, u32 init_crc);
-asmlinkage u32 crc32_armv8_le(u32 init_crc, const u8 buf[], u32 len);
-
-asmlinkage u32 crc32c_pmull_le(const u8 buf[], u32 len, u32 init_crc);
-asmlinkage u32 crc32c_armv8_le(u32 init_crc, const u8 buf[], u32 len);
-
-static u32 (*fallback_crc32)(u32 init_crc, const u8 buf[], u32 len);
-static u32 (*fallback_crc32c)(u32 init_crc, const u8 buf[], u32 len);
-
-static int crc32_cra_init(struct crypto_tfm *tfm)
-{
-	u32 *key = crypto_tfm_ctx(tfm);
-
-	*key = 0;
-	return 0;
-}
-
-static int crc32c_cra_init(struct crypto_tfm *tfm)
-{
-	u32 *key = crypto_tfm_ctx(tfm);
-
-	*key = ~0;
-	return 0;
-}
-
-static int crc32_setkey(struct crypto_shash *hash, const u8 *key,
-			unsigned int keylen)
-{
-	u32 *mctx = crypto_shash_ctx(hash);
-
-	if (keylen != sizeof(u32))
-		return -EINVAL;
-	*mctx = le32_to_cpup((__le32 *)key);
-	return 0;
-}
-
-static int crc32_init(struct shash_desc *desc)
-{
-	u32 *mctx = crypto_shash_ctx(desc->tfm);
-	u32 *crc = shash_desc_ctx(desc);
-
-	*crc = *mctx;
-	return 0;
-}
-
-static int crc32_update(struct shash_desc *desc, const u8 *data,
-			unsigned int length)
-{
-	u32 *crc = shash_desc_ctx(desc);
-
-	*crc = crc32_armv8_le(*crc, data, length);
-	return 0;
-}
-
-static int crc32c_update(struct shash_desc *desc, const u8 *data,
-			 unsigned int length)
-{
-	u32 *crc = shash_desc_ctx(desc);
-
-	*crc = crc32c_armv8_le(*crc, data, length);
-	return 0;
-}
-
-static int crc32_final(struct shash_desc *desc, u8 *out)
-{
-	u32 *crc = shash_desc_ctx(desc);
-
-	put_unaligned_le32(*crc, out);
-	return 0;
-}
-
-static int crc32c_final(struct shash_desc *desc, u8 *out)
-{
-	u32 *crc = shash_desc_ctx(desc);
-
-	put_unaligned_le32(~*crc, out);
-	return 0;
-}
-
-static int crc32_pmull_update(struct shash_desc *desc, const u8 *data,
-			      unsigned int length)
-{
-	u32 *crc = shash_desc_ctx(desc);
-	unsigned int l;
-
-	if (crypto_simd_usable()) {
-		if ((u32)data % SCALE_F) {
-			l = min_t(u32, length, SCALE_F - ((u32)data % SCALE_F));
-
-			*crc = fallback_crc32(*crc, data, l);
-
-			data += l;
-			length -= l;
-		}
-
-		if (length >= PMULL_MIN_LEN) {
-			l = round_down(length, SCALE_F);
-
-			kernel_neon_begin();
-			*crc = crc32_pmull_le(data, l, *crc);
-			kernel_neon_end();
-
-			data += l;
-			length -= l;
-		}
-	}
-
-	if (length > 0)
-		*crc = fallback_crc32(*crc, data, length);
-
-	return 0;
-}
-
-static int crc32c_pmull_update(struct shash_desc *desc, const u8 *data,
-			       unsigned int length)
-{
-	u32 *crc = shash_desc_ctx(desc);
-	unsigned int l;
-
-	if (crypto_simd_usable()) {
-		if ((u32)data % SCALE_F) {
-			l = min_t(u32, length, SCALE_F - ((u32)data % SCALE_F));
-
-			*crc = fallback_crc32c(*crc, data, l);
-
-			data += l;
-			length -= l;
-		}
-
-		if (length >= PMULL_MIN_LEN) {
-			l = round_down(length, SCALE_F);
-
-			kernel_neon_begin();
-			*crc = crc32c_pmull_le(data, l, *crc);
-			kernel_neon_end();
-
-			data += l;
-			length -= l;
-		}
-	}
-
-	if (length > 0)
-		*crc = fallback_crc32c(*crc, data, length);
-
-	return 0;
-}
-
-static struct shash_alg crc32_pmull_algs[] = { {
-	.setkey			= crc32_setkey,
-	.init			= crc32_init,
-	.update			= crc32_update,
-	.final			= crc32_final,
-	.descsize		= sizeof(u32),
-	.digestsize		= sizeof(u32),
-
-	.base.cra_ctxsize	= sizeof(u32),
-	.base.cra_init		= crc32_cra_init,
-	.base.cra_name		= "crc32",
-	.base.cra_driver_name	= "crc32-arm-ce",
-	.base.cra_priority	= 200,
-	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-	.base.cra_blocksize	= 1,
-	.base.cra_module	= THIS_MODULE,
-}, {
-	.setkey			= crc32_setkey,
-	.init			= crc32_init,
-	.update			= crc32c_update,
-	.final			= crc32c_final,
-	.descsize		= sizeof(u32),
-	.digestsize		= sizeof(u32),
-
-	.base.cra_ctxsize	= sizeof(u32),
-	.base.cra_init		= crc32c_cra_init,
-	.base.cra_name		= "crc32c",
-	.base.cra_driver_name	= "crc32c-arm-ce",
-	.base.cra_priority	= 200,
-	.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,
-	.base.cra_blocksize	= 1,
-	.base.cra_module	= THIS_MODULE,
-} };
-
-static int __init crc32_pmull_mod_init(void)
-{
-	if (elf_hwcap2 & HWCAP2_PMULL) {
-		crc32_pmull_algs[0].update = crc32_pmull_update;
-		crc32_pmull_algs[1].update = crc32c_pmull_update;
-
-		if (elf_hwcap2 & HWCAP2_CRC32) {
-			fallback_crc32 = crc32_armv8_le;
-			fallback_crc32c = crc32c_armv8_le;
-		} else {
-			fallback_crc32 = crc32_le;
-			fallback_crc32c = __crc32c_le;
-		}
-	} else if (!(elf_hwcap2 & HWCAP2_CRC32)) {
-		return -ENODEV;
-	}
-
-	return crypto_register_shashes(crc32_pmull_algs,
-				       ARRAY_SIZE(crc32_pmull_algs));
-}
-
-static void __exit crc32_pmull_mod_exit(void)
-{
-	crypto_unregister_shashes(crc32_pmull_algs,
-				  ARRAY_SIZE(crc32_pmull_algs));
-}
-
-static const struct cpu_feature __maybe_unused crc32_cpu_feature[] = {
-	{ cpu_feature(CRC32) }, { cpu_feature(PMULL) }, { }
-};
-MODULE_DEVICE_TABLE(cpu, crc32_cpu_feature);
-
-module_init(crc32_pmull_mod_init);
-module_exit(crc32_pmull_mod_exit);
-
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_DESCRIPTION("Accelerated CRC32(C) using ARM CRC, NEON and Crypto Extensions");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("crc32");
-MODULE_ALIAS_CRYPTO("crc32c");
diff --git a/arch/arm/crypto/crct10dif-ce-core.S b/arch/arm/crypto/crct10dif-ce-core.S
deleted file mode 100644
index 2bbf2df9c1e2..000000000000
--- a/arch/arm/crypto/crct10dif-ce-core.S
+++ /dev/null
@@ -1,468 +0,0 @@
-//
-// Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions
-//
-// Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
-// Copyright (C) 2019 Google LLC <ebiggers@google.com>
-//
-// This program is free software; you can redistribute it and/or modify
-// it under the terms of the GNU General Public License version 2 as
-// published by the Free Software Foundation.
-//
-
-// Derived from the x86 version:
-//
-// Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions
-//
-// Copyright (c) 2013, Intel Corporation
-//
-// Authors:
-//     Erdinc Ozturk <erdinc.ozturk@intel.com>
-//     Vinodh Gopal <vinodh.gopal@intel.com>
-//     James Guilford <james.guilford@intel.com>
-//     Tim Chen <tim.c.chen@linux.intel.com>
-//
-// This software is available to you under a choice of one of two
-// licenses.  You may choose to be licensed under the terms of the GNU
-// General Public License (GPL) Version 2, available from the file
-// COPYING in the main directory of this source tree, or the
-// OpenIB.org BSD license below:
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-// * Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// * Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the
-//   distribution.
-//
-// * Neither the name of the Intel Corporation nor the names of its
-//   contributors may be used to endorse or promote products derived from
-//   this software without specific prior written permission.
-//
-//
-// THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY
-// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR
-// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//       Reference paper titled "Fast CRC Computation for Generic
-//	Polynomials Using PCLMULQDQ Instruction"
-//       URL: http://www.intel.com/content/dam/www/public/us/en/documents
-//  /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
-//
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#ifdef CONFIG_CPU_ENDIAN_BE8
-#define CPU_LE(code...)
-#else
-#define CPU_LE(code...)		code
-#endif
-
-	.text
-	.arch		armv8-a
-	.fpu		crypto-neon-fp-armv8
-
-	init_crc	.req	r0
-	buf		.req	r1
-	len		.req	r2
-
-	fold_consts_ptr	.req	ip
-
-	q0l		.req	d0
-	q0h		.req	d1
-	q1l		.req	d2
-	q1h		.req	d3
-	q2l		.req	d4
-	q2h		.req	d5
-	q3l		.req	d6
-	q3h		.req	d7
-	q4l		.req	d8
-	q4h		.req	d9
-	q5l		.req	d10
-	q5h		.req	d11
-	q6l		.req	d12
-	q6h		.req	d13
-	q7l		.req	d14
-	q7h		.req	d15
-	q8l		.req	d16
-	q8h		.req	d17
-	q9l		.req	d18
-	q9h		.req	d19
-	q10l		.req	d20
-	q10h		.req	d21
-	q11l		.req	d22
-	q11h		.req	d23
-	q12l		.req	d24
-	q12h		.req	d25
-
-	FOLD_CONSTS	.req	q10
-	FOLD_CONST_L	.req	q10l
-	FOLD_CONST_H	.req	q10h
-
-	/*
-	 * Pairwise long polynomial multiplication of two 16-bit values
-	 *
-	 *   { w0, w1 }, { y0, y1 }
-	 *
-	 * by two 64-bit values
-	 *
-	 *   { x0, x1, x2, x3, x4, x5, x6, x7 }, { z0, z1, z2, z3, z4, z5, z6, z7 }
-	 *
-	 * where each vector element is a byte, ordered from least to most
-	 * significant. The resulting 80-bit vectors are XOR'ed together.
-	 *
-	 * This can be implemented using 8x8 long polynomial multiplication, by
-	 * reorganizing the input so that each pairwise 8x8 multiplication
-	 * produces one of the terms from the decomposition below, and
-	 * combining the results of each rank and shifting them into place.
-	 *
-	 * Rank
-	 *  0            w0*x0 ^              |        y0*z0 ^
-	 *  1       (w0*x1 ^ w1*x0) <<  8 ^   |   (y0*z1 ^ y1*z0) <<  8 ^
-	 *  2       (w0*x2 ^ w1*x1) << 16 ^   |   (y0*z2 ^ y1*z1) << 16 ^
-	 *  3       (w0*x3 ^ w1*x2) << 24 ^   |   (y0*z3 ^ y1*z2) << 24 ^
-	 *  4       (w0*x4 ^ w1*x3) << 32 ^   |   (y0*z4 ^ y1*z3) << 32 ^
-	 *  5       (w0*x5 ^ w1*x4) << 40 ^   |   (y0*z5 ^ y1*z4) << 40 ^
-	 *  6       (w0*x6 ^ w1*x5) << 48 ^   |   (y0*z6 ^ y1*z5) << 48 ^
-	 *  7       (w0*x7 ^ w1*x6) << 56 ^   |   (y0*z7 ^ y1*z6) << 56 ^
-	 *  8            w1*x7      << 64     |        y1*z7      << 64
-	 *
-	 * The inputs can be reorganized into
-	 *
-	 *   { w0, w0, w0, w0, y0, y0, y0, y0 }, { w1, w1, w1, w1, y1, y1, y1, y1 }
-	 *   { x0, x2, x4, x6, z0, z2, z4, z6 }, { x1, x3, x5, x7, z1, z3, z5, z7 }
-	 *
-	 * and after performing 8x8->16 bit long polynomial multiplication of
-	 * each of the halves of the first vector with those of the second one,
-	 * we obtain the following four vectors of 16-bit elements:
-	 *
-	 *   a := { w0*x0, w0*x2, w0*x4, w0*x6 }, { y0*z0, y0*z2, y0*z4, y0*z6 }
-	 *   b := { w0*x1, w0*x3, w0*x5, w0*x7 }, { y0*z1, y0*z3, y0*z5, y0*z7 }
-	 *   c := { w1*x0, w1*x2, w1*x4, w1*x6 }, { y1*z0, y1*z2, y1*z4, y1*z6 }
-	 *   d := { w1*x1, w1*x3, w1*x5, w1*x7 }, { y1*z1, y1*z3, y1*z5, y1*z7 }
-	 *
-	 * Results b and c can be XORed together, as the vector elements have
-	 * matching ranks. Then, the final XOR can be pulled forward, and
-	 * applied between the halves of each of the remaining three vectors,
-	 * which are then shifted into place, and XORed together to produce the
-	 * final 80-bit result.
-	 */
-        .macro		pmull16x64_p8, v16, v64
-	vext.8		q11, \v64, \v64, #1
-	vld1.64		{q12}, [r4, :128]
-	vuzp.8		q11, \v64
-	vtbl.8		d24, {\v16\()_L-\v16\()_H}, d24
-	vtbl.8		d25, {\v16\()_L-\v16\()_H}, d25
-	bl		__pmull16x64_p8
-	veor		\v64, q12, q14
-        .endm
-
-__pmull16x64_p8:
-	vmull.p8	q13, d23, d24
-	vmull.p8	q14, d23, d25
-	vmull.p8	q15, d22, d24
-	vmull.p8	q12, d22, d25
-
-	veor		q14, q14, q15
-	veor		d24, d24, d25
-	veor		d26, d26, d27
-	veor		d28, d28, d29
-	vmov.i32	d25, #0
-	vmov.i32	d29, #0
-	vext.8		q12, q12, q12, #14
-	vext.8		q14, q14, q14, #15
-	veor		d24, d24, d26
-	bx		lr
-ENDPROC(__pmull16x64_p8)
-
-        .macro		pmull16x64_p64, v16, v64
-	vmull.p64	q11, \v64\()l, \v16\()_L
-	vmull.p64	\v64, \v64\()h, \v16\()_H
-	veor		\v64, \v64, q11
-	.endm
-
-	// Fold reg1, reg2 into the next 32 data bytes, storing the result back
-	// into reg1, reg2.
-	.macro		fold_32_bytes, reg1, reg2, p
-	vld1.64		{q8-q9}, [buf]!
-
-	pmull16x64_\p	FOLD_CONST, \reg1
-	pmull16x64_\p	FOLD_CONST, \reg2
-
-CPU_LE(	vrev64.8	q8, q8	)
-CPU_LE(	vrev64.8	q9, q9	)
-	vswp		q8l, q8h
-	vswp		q9l, q9h
-
-	veor.8		\reg1, \reg1, q8
-	veor.8		\reg2, \reg2, q9
-	.endm
-
-	// Fold src_reg into dst_reg, optionally loading the next fold constants
-	.macro		fold_16_bytes, src_reg, dst_reg, p, load_next_consts
-	pmull16x64_\p	FOLD_CONST, \src_reg
-	.ifnb		\load_next_consts
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
-	.endif
-	veor.8		\dst_reg, \dst_reg, \src_reg
-	.endm
-
-	.macro		crct10dif, p
-	// For sizes less than 256 bytes, we can't fold 128 bytes at a time.
-	cmp		len, #256
-	blt		.Lless_than_256_bytes\@
-
-	mov_l		fold_consts_ptr, .Lfold_across_128_bytes_consts
-
-	// Load the first 128 data bytes.  Byte swapping is necessary to make
-	// the bit order match the polynomial coefficient order.
-	vld1.64		{q0-q1}, [buf]!
-	vld1.64		{q2-q3}, [buf]!
-	vld1.64		{q4-q5}, [buf]!
-	vld1.64		{q6-q7}, [buf]!
-CPU_LE(	vrev64.8	q0, q0	)
-CPU_LE(	vrev64.8	q1, q1	)
-CPU_LE(	vrev64.8	q2, q2	)
-CPU_LE(	vrev64.8	q3, q3	)
-CPU_LE(	vrev64.8	q4, q4	)
-CPU_LE(	vrev64.8	q5, q5	)
-CPU_LE(	vrev64.8	q6, q6	)
-CPU_LE(	vrev64.8	q7, q7	)
-	vswp		q0l, q0h
-	vswp		q1l, q1h
-	vswp		q2l, q2h
-	vswp		q3l, q3h
-	vswp		q4l, q4h
-	vswp		q5l, q5h
-	vswp		q6l, q6h
-	vswp		q7l, q7h
-
-	// XOR the first 16 data *bits* with the initial CRC value.
-	vmov.i8		q8h, #0
-	vmov.u16	q8h[3], init_crc
-	veor		q0h, q0h, q8h
-
-	// Load the constants for folding across 128 bytes.
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
-
-	// Subtract 128 for the 128 data bytes just consumed.  Subtract another
-	// 128 to simplify the termination condition of the following loop.
-	sub		len, len, #256
-
-	// While >= 128 data bytes remain (not counting q0-q7), fold the 128
-	// bytes q0-q7 into them, storing the result back into q0-q7.
-.Lfold_128_bytes_loop\@:
-	fold_32_bytes	q0, q1, \p
-	fold_32_bytes	q2, q3, \p
-	fold_32_bytes	q4, q5, \p
-	fold_32_bytes	q6, q7, \p
-	subs		len, len, #128
-	bge		.Lfold_128_bytes_loop\@
-
-	// Now fold the 112 bytes in q0-q6 into the 16 bytes in q7.
-
-	// Fold across 64 bytes.
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
-	fold_16_bytes	q0, q4, \p
-	fold_16_bytes	q1, q5, \p
-	fold_16_bytes	q2, q6, \p
-	fold_16_bytes	q3, q7, \p, 1
-	// Fold across 32 bytes.
-	fold_16_bytes	q4, q6, \p
-	fold_16_bytes	q5, q7, \p, 1
-	// Fold across 16 bytes.
-	fold_16_bytes	q6, q7, \p
-
-	// Add 128 to get the correct number of data bytes remaining in 0...127
-	// (not counting q7), following the previous extra subtraction by 128.
-	// Then subtract 16 to simplify the termination condition of the
-	// following loop.
-	adds		len, len, #(128-16)
-
-	// While >= 16 data bytes remain (not counting q7), fold the 16 bytes q7
-	// into them, storing the result back into q7.
-	blt		.Lfold_16_bytes_loop_done\@
-.Lfold_16_bytes_loop\@:
-	pmull16x64_\p	FOLD_CONST, q7
-	vld1.64		{q0}, [buf]!
-CPU_LE(	vrev64.8	q0, q0	)
-	vswp		q0l, q0h
-	veor.8		q7, q7, q0
-	subs		len, len, #16
-	bge		.Lfold_16_bytes_loop\@
-
-.Lfold_16_bytes_loop_done\@:
-	// Add 16 to get the correct number of data bytes remaining in 0...15
-	// (not counting q7), following the previous extra subtraction by 16.
-	adds		len, len, #16
-	beq		.Lreduce_final_16_bytes\@
-
-.Lhandle_partial_segment\@:
-	// Reduce the last '16 + len' bytes where 1 <= len <= 15 and the first
-	// 16 bytes are in q7 and the rest are the remaining data in 'buf'.  To
-	// do this without needing a fold constant for each possible 'len',
-	// redivide the bytes into a first chunk of 'len' bytes and a second
-	// chunk of 16 bytes, then fold the first chunk into the second.
-
-	// q0 = last 16 original data bytes
-	add		buf, buf, len
-	sub		buf, buf, #16
-	vld1.64		{q0}, [buf]
-CPU_LE(	vrev64.8	q0, q0	)
-	vswp		q0l, q0h
-
-	// q1 = high order part of second chunk: q7 left-shifted by 'len' bytes.
-	mov_l		r1, .Lbyteshift_table + 16
-	sub		r1, r1, len
-	vld1.8		{q2}, [r1]
-	vtbl.8		q1l, {q7l-q7h}, q2l
-	vtbl.8		q1h, {q7l-q7h}, q2h
-
-	// q3 = first chunk: q7 right-shifted by '16-len' bytes.
-	vmov.i8		q3, #0x80
-	veor.8		q2, q2, q3
-	vtbl.8		q3l, {q7l-q7h}, q2l
-	vtbl.8		q3h, {q7l-q7h}, q2h
-
-	// Convert to 8-bit masks: 'len' 0x00 bytes, then '16-len' 0xff bytes.
-	vshr.s8		q2, q2, #7
-
-	// q2 = second chunk: 'len' bytes from q0 (low-order bytes),
-	// then '16-len' bytes from q1 (high-order bytes).
-	vbsl.8		q2, q1, q0
-
-	// Fold the first chunk into the second chunk, storing the result in q7.
-	pmull16x64_\p	FOLD_CONST, q3
-	veor.8		q7, q3, q2
-	b		.Lreduce_final_16_bytes\@
-
-.Lless_than_256_bytes\@:
-	// Checksumming a buffer of length 16...255 bytes
-
-	mov_l		fold_consts_ptr, .Lfold_across_16_bytes_consts
-
-	// Load the first 16 data bytes.
-	vld1.64		{q7}, [buf]!
-CPU_LE(	vrev64.8	q7, q7	)
-	vswp		q7l, q7h
-
-	// XOR the first 16 data *bits* with the initial CRC value.
-	vmov.i8		q0h, #0
-	vmov.u16	q0h[3], init_crc
-	veor.8		q7h, q7h, q0h
-
-	// Load the fold-across-16-bytes constants.
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
-
-	cmp		len, #16
-	beq		.Lreduce_final_16_bytes\@	// len == 16
-	subs		len, len, #32
-	addlt		len, len, #16
-	blt		.Lhandle_partial_segment\@	// 17 <= len <= 31
-	b		.Lfold_16_bytes_loop\@		// 32 <= len <= 255
-
-.Lreduce_final_16_bytes\@:
-	.endm
-
-//
-// u16 crc_t10dif_pmull(u16 init_crc, const u8 *buf, size_t len);
-//
-// Assumes len >= 16.
-//
-ENTRY(crc_t10dif_pmull64)
-	crct10dif	p64
-
-	// Reduce the 128-bit value M(x), stored in q7, to the final 16-bit CRC.
-
-	// Load 'x^48 * (x^48 mod G(x))' and 'x^48 * (x^80 mod G(x))'.
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]!
-
-	// Fold the high 64 bits into the low 64 bits, while also multiplying by
-	// x^64.  This produces a 128-bit value congruent to x^64 * M(x) and
-	// whose low 48 bits are 0.
-	vmull.p64	q0, q7h, FOLD_CONST_H	// high bits * x^48 * (x^80 mod G(x))
-	veor.8		q0h, q0h, q7l		// + low bits * x^64
-
-	// Fold the high 32 bits into the low 96 bits.  This produces a 96-bit
-	// value congruent to x^64 * M(x) and whose low 48 bits are 0.
-	vmov.i8		q1, #0
-	vmov		s4, s3			// extract high 32 bits
-	vmov		s3, s5			// zero high 32 bits
-	vmull.p64	q1, q1l, FOLD_CONST_L	// high 32 bits * x^48 * (x^48 mod G(x))
-	veor.8		q0, q0, q1		// + low bits
-
-	// Load G(x) and floor(x^48 / G(x)).
-	vld1.64		{FOLD_CONSTS}, [fold_consts_ptr, :128]
-
-	// Use Barrett reduction to compute the final CRC value.
-	vmull.p64	q1, q0h, FOLD_CONST_H	// high 32 bits * floor(x^48 / G(x))
-	vshr.u64	q1l, q1l, #32		// /= x^32
-	vmull.p64	q1, q1l, FOLD_CONST_L	// *= G(x)
-	vshr.u64	q0l, q0l, #48
-	veor.8		q0l, q0l, q1l		// + low 16 nonzero bits
-	// Final CRC value (x^16 * M(x)) mod G(x) is in low 16 bits of q0.
-
-	vmov.u16	r0, q0l[0]
-	bx		lr
-ENDPROC(crc_t10dif_pmull64)
-
-ENTRY(crc_t10dif_pmull8)
-	push		{r4, lr}
-	mov_l		r4, .L16x64perm
-
-	crct10dif	p8
-
-CPU_LE(	vrev64.8	q7, q7	)
-	vswp		q7l, q7h
-	vst1.64		{q7}, [r3, :128]
-	pop		{r4, pc}
-ENDPROC(crc_t10dif_pmull8)
-
-	.section	".rodata", "a"
-	.align		4
-
-// Fold constants precomputed from the polynomial 0x18bb7
-// G(x) = x^16 + x^15 + x^11 + x^9 + x^8 + x^7 + x^5 + x^4 + x^2 + x^1 + x^0
-.Lfold_across_128_bytes_consts:
-	.quad		0x0000000000006123	// x^(8*128)	mod G(x)
-	.quad		0x0000000000002295	// x^(8*128+64)	mod G(x)
-// .Lfold_across_64_bytes_consts:
-	.quad		0x0000000000001069	// x^(4*128)	mod G(x)
-	.quad		0x000000000000dd31	// x^(4*128+64)	mod G(x)
-// .Lfold_across_32_bytes_consts:
-	.quad		0x000000000000857d	// x^(2*128)	mod G(x)
-	.quad		0x0000000000007acc	// x^(2*128+64)	mod G(x)
-.Lfold_across_16_bytes_consts:
-	.quad		0x000000000000a010	// x^(1*128)	mod G(x)
-	.quad		0x0000000000001faa	// x^(1*128+64)	mod G(x)
-// .Lfinal_fold_consts:
-	.quad		0x1368000000000000	// x^48 * (x^48 mod G(x))
-	.quad		0x2d56000000000000	// x^48 * (x^80 mod G(x))
-// .Lbarrett_reduction_consts:
-	.quad		0x0000000000018bb7	// G(x)
-	.quad		0x00000001f65a57f8	// floor(x^48 / G(x))
-
-// For 1 <= len <= 15, the 16-byte vector beginning at &byteshift_table[16 -
-// len] is the index vector to shift left by 'len' bytes, and is also {0x80,
-// ..., 0x80} XOR the index vector to shift right by '16 - len' bytes.
-.Lbyteshift_table:
-	.byte		 0x0, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87
-	.byte		0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f
-	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
-	.byte		 0x8,  0x9,  0xa,  0xb,  0xc,  0xd,  0xe , 0x0
-
-.L16x64perm:
-	.quad		0x808080800000000, 0x909090901010101
diff --git a/arch/arm/crypto/crct10dif-ce-glue.c b/arch/arm/crypto/crct10dif-ce-glue.c
deleted file mode 100644
index a8b74523729e..000000000000
--- a/arch/arm/crypto/crct10dif-ce-glue.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions instructions
- *
- * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/crc-t10dif.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#define CRC_T10DIF_PMULL_CHUNK_SIZE	16U
-
-asmlinkage u16 crc_t10dif_pmull64(u16 init_crc, const u8 *buf, size_t len);
-asmlinkage void crc_t10dif_pmull8(u16 init_crc, const u8 *buf, size_t len,
-				  u8 out[16]);
-
-static int crct10dif_init(struct shash_desc *desc)
-{
-	u16 *crc = shash_desc_ctx(desc);
-
-	*crc = 0;
-	return 0;
-}
-
-static int crct10dif_update_ce(struct shash_desc *desc, const u8 *data,
-			       unsigned int length)
-{
-	u16 *crc = shash_desc_ctx(desc);
-
-	if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) {
-		kernel_neon_begin();
-		*crc = crc_t10dif_pmull64(*crc, data, length);
-		kernel_neon_end();
-	} else {
-		*crc = crc_t10dif_generic(*crc, data, length);
-	}
-
-	return 0;
-}
-
-static int crct10dif_update_neon(struct shash_desc *desc, const u8 *data,
-			         unsigned int length)
-{
-	u16 *crcp = shash_desc_ctx(desc);
-	u8 buf[16] __aligned(16);
-	u16 crc = *crcp;
-
-	if (length > CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) {
-		kernel_neon_begin();
-		crc_t10dif_pmull8(crc, data, length, buf);
-		kernel_neon_end();
-
-		crc = 0;
-		data = buf;
-		length = sizeof(buf);
-	}
-
-	*crcp = crc_t10dif_generic(crc, data, length);
-	return 0;
-}
-
-static int crct10dif_final(struct shash_desc *desc, u8 *out)
-{
-	u16 *crc = shash_desc_ctx(desc);
-
-	*(u16 *)out = *crc;
-	return 0;
-}
-
-static struct shash_alg algs[] = {{
-	.digestsize		= CRC_T10DIF_DIGEST_SIZE,
-	.init			= crct10dif_init,
-	.update			= crct10dif_update_neon,
-	.final			= crct10dif_final,
-	.descsize		= CRC_T10DIF_DIGEST_SIZE,
-
-	.base.cra_name		= "crct10dif",
-	.base.cra_driver_name	= "crct10dif-arm-neon",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= CRC_T10DIF_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-}, {
-	.digestsize		= CRC_T10DIF_DIGEST_SIZE,
-	.init			= crct10dif_init,
-	.update			= crct10dif_update_ce,
-	.final			= crct10dif_final,
-	.descsize		= CRC_T10DIF_DIGEST_SIZE,
-
-	.base.cra_name		= "crct10dif",
-	.base.cra_driver_name	= "crct10dif-arm-ce",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= CRC_T10DIF_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-}};
-
-static int __init crc_t10dif_mod_init(void)
-{
-	if (!(elf_hwcap & HWCAP_NEON))
-		return -ENODEV;
-
-	return crypto_register_shashes(algs, 1 + !!(elf_hwcap2 & HWCAP2_PMULL));
-}
-
-static void __exit crc_t10dif_mod_exit(void)
-{
-	crypto_unregister_shashes(algs, 1 + !!(elf_hwcap2 & HWCAP2_PMULL));
-}
-
-module_init(crc_t10dif_mod_init);
-module_exit(crc_t10dif_mod_exit);
-
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_DESCRIPTION("Accelerated CRC-T10DIF using ARM NEON and Crypto Extensions");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("crct10dif");
diff --git a/arch/arm/crypto/curve25519-core.S b/arch/arm/crypto/curve25519-core.S
deleted file mode 100644
index b697fa5d059a..000000000000
--- a/arch/arm/crypto/curve25519-core.S
+++ /dev/null
@@ -1,2062 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-/*
- * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- *
- * Based on public domain code from Daniel J. Bernstein and Peter Schwabe. This
- * began from SUPERCOP's curve25519/neon2/scalarmult.s, but has subsequently been
- * manually reworked for use in kernel space.
- */
-
-#include <linux/linkage.h>
-
-.text
-.arch armv7-a
-.fpu neon
-.align 4
-
-ENTRY(curve25519_neon)
-	push		{r4-r11, lr}
-	mov		ip, sp
-	sub		r3, sp, #704
-	and		r3, r3, #0xfffffff0
-	mov		sp, r3
-	movw		r4, #0
-	movw		r5, #254
-	vmov.i32	q0, #1
-	vshr.u64	q1, q0, #7
-	vshr.u64	q0, q0, #8
-	vmov.i32	d4, #19
-	vmov.i32	d5, #38
-	add		r6, sp, #480
-	vst1.8		{d2-d3}, [r6, : 128]!
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vst1.8		{d4-d5}, [r6, : 128]
-	add		r6, r3, #0
-	vmov.i32	q2, #0
-	vst1.8		{d4-d5}, [r6, : 128]!
-	vst1.8		{d4-d5}, [r6, : 128]!
-	vst1.8		d4, [r6, : 64]
-	add		r6, r3, #0
-	movw		r7, #960
-	sub		r7, r7, #2
-	neg		r7, r7
-	sub		r7, r7, r7, LSL #7
-	str		r7, [r6]
-	add		r6, sp, #672
-	vld1.8		{d4-d5}, [r1]!
-	vld1.8		{d6-d7}, [r1]
-	vst1.8		{d4-d5}, [r6, : 128]!
-	vst1.8		{d6-d7}, [r6, : 128]
-	sub		r1, r6, #16
-	ldrb		r6, [r1]
-	and		r6, r6, #248
-	strb		r6, [r1]
-	ldrb		r6, [r1, #31]
-	and		r6, r6, #127
-	orr		r6, r6, #64
-	strb		r6, [r1, #31]
-	vmov.i64	q2, #0xffffffff
-	vshr.u64	q3, q2, #7
-	vshr.u64	q2, q2, #6
-	vld1.8		{d8}, [r2]
-	vld1.8		{d10}, [r2]
-	add		r2, r2, #6
-	vld1.8		{d12}, [r2]
-	vld1.8		{d14}, [r2]
-	add		r2, r2, #6
-	vld1.8		{d16}, [r2]
-	add		r2, r2, #4
-	vld1.8		{d18}, [r2]
-	vld1.8		{d20}, [r2]
-	add		r2, r2, #6
-	vld1.8		{d22}, [r2]
-	add		r2, r2, #2
-	vld1.8		{d24}, [r2]
-	vld1.8		{d26}, [r2]
-	vshr.u64	q5, q5, #26
-	vshr.u64	q6, q6, #3
-	vshr.u64	q7, q7, #29
-	vshr.u64	q8, q8, #6
-	vshr.u64	q10, q10, #25
-	vshr.u64	q11, q11, #3
-	vshr.u64	q12, q12, #12
-	vshr.u64	q13, q13, #38
-	vand		q4, q4, q2
-	vand		q6, q6, q2
-	vand		q8, q8, q2
-	vand		q10, q10, q2
-	vand		q2, q12, q2
-	vand		q5, q5, q3
-	vand		q7, q7, q3
-	vand		q9, q9, q3
-	vand		q11, q11, q3
-	vand		q3, q13, q3
-	add		r2, r3, #48
-	vadd.i64	q12, q4, q1
-	vadd.i64	q13, q10, q1
-	vshr.s64	q12, q12, #26
-	vshr.s64	q13, q13, #26
-	vadd.i64	q5, q5, q12
-	vshl.i64	q12, q12, #26
-	vadd.i64	q14, q5, q0
-	vadd.i64	q11, q11, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q11, q0
-	vsub.i64	q4, q4, q12
-	vshr.s64	q12, q14, #25
-	vsub.i64	q10, q10, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q12
-	vshl.i64	q12, q12, #25
-	vadd.i64	q14, q6, q1
-	vadd.i64	q2, q2, q13
-	vsub.i64	q5, q5, q12
-	vshr.s64	q12, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q1
-	vadd.i64	q7, q7, q12
-	vshl.i64	q12, q12, #26
-	vadd.i64	q15, q7, q0
-	vsub.i64	q11, q11, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q12
-	vshr.s64	q12, q15, #25
-	vadd.i64	q3, q3, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q3, q0
-	vadd.i64	q8, q8, q12
-	vshl.i64	q12, q12, #25
-	vadd.i64	q15, q8, q1
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q7, q12
-	vshr.s64	q12, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q9, q9, q12
-	vtrn.32		d12, d14
-	vshl.i64	q12, q12, #26
-	vtrn.32		d13, d15
-	vadd.i64	q0, q9, q0
-	vadd.i64	q4, q4, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q6, q13, #4
-	vsub.i64	q7, q8, q12
-	vshr.s64	q0, q0, #25
-	vadd.i64	q4, q4, q6
-	vadd.i64	q6, q10, q0
-	vshl.i64	q0, q0, #25
-	vadd.i64	q8, q6, q1
-	vadd.i64	q4, q4, q13
-	vshl.i64	q10, q13, #25
-	vadd.i64	q1, q4, q1
-	vsub.i64	q0, q9, q0
-	vshr.s64	q8, q8, #26
-	vsub.i64	q3, q3, q10
-	vtrn.32		d14, d0
-	vshr.s64	q1, q1, #26
-	vtrn.32		d15, d1
-	vadd.i64	q0, q11, q8
-	vst1.8		d14, [r2, : 64]
-	vshl.i64	q7, q8, #26
-	vadd.i64	q5, q5, q1
-	vtrn.32		d4, d6
-	vshl.i64	q1, q1, #26
-	vtrn.32		d5, d7
-	vsub.i64	q3, q6, q7
-	add		r2, r2, #16
-	vsub.i64	q1, q4, q1
-	vst1.8		d4, [r2, : 64]
-	vtrn.32		d6, d0
-	vtrn.32		d7, d1
-	sub		r2, r2, #8
-	vtrn.32		d2, d10
-	vtrn.32		d3, d11
-	vst1.8		d6, [r2, : 64]
-	sub		r2, r2, #24
-	vst1.8		d2, [r2, : 64]
-	add		r2, r3, #96
-	vmov.i32	q0, #0
-	vmov.i64	d2, #0xff
-	vmov.i64	d3, #0
-	vshr.u32	q1, q1, #7
-	vst1.8		{d2-d3}, [r2, : 128]!
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		d0, [r2, : 64]
-	add		r2, r3, #144
-	vmov.i32	q0, #0
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		d0, [r2, : 64]
-	add		r2, r3, #240
-	vmov.i32	q0, #0
-	vmov.i64	d2, #0xff
-	vmov.i64	d3, #0
-	vshr.u32	q1, q1, #7
-	vst1.8		{d2-d3}, [r2, : 128]!
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		d0, [r2, : 64]
-	add		r2, r3, #48
-	add		r6, r3, #192
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4}, [r2, : 64]
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vst1.8		{d2-d3}, [r6, : 128]!
-	vst1.8		d4, [r6, : 64]
-.Lmainloop:
-	mov		r2, r5, LSR #3
-	and		r6, r5, #7
-	ldrb		r2, [r1, r2]
-	mov		r2, r2, LSR r6
-	and		r2, r2, #1
-	str		r5, [sp, #456]
-	eor		r4, r4, r2
-	str		r2, [sp, #460]
-	neg		r2, r4
-	add		r4, r3, #96
-	add		r5, r3, #192
-	add		r6, r3, #144
-	vld1.8		{d8-d9}, [r4, : 128]!
-	add		r7, r3, #240
-	vld1.8		{d10-d11}, [r5, : 128]!
-	veor		q6, q4, q5
-	vld1.8		{d14-d15}, [r6, : 128]!
-	vdup.i32	q8, r2
-	vld1.8		{d18-d19}, [r7, : 128]!
-	veor		q10, q7, q9
-	vld1.8		{d22-d23}, [r4, : 128]!
-	vand		q6, q6, q8
-	vld1.8		{d24-d25}, [r5, : 128]!
-	vand		q10, q10, q8
-	vld1.8		{d26-d27}, [r6, : 128]!
-	veor		q4, q4, q6
-	vld1.8		{d28-d29}, [r7, : 128]!
-	veor		q5, q5, q6
-	vld1.8		{d0}, [r4, : 64]
-	veor		q6, q7, q10
-	vld1.8		{d2}, [r5, : 64]
-	veor		q7, q9, q10
-	vld1.8		{d4}, [r6, : 64]
-	veor		q9, q11, q12
-	vld1.8		{d6}, [r7, : 64]
-	veor		q10, q0, q1
-	sub		r2, r4, #32
-	vand		q9, q9, q8
-	sub		r4, r5, #32
-	vand		q10, q10, q8
-	sub		r5, r6, #32
-	veor		q11, q11, q9
-	sub		r6, r7, #32
-	veor		q0, q0, q10
-	veor		q9, q12, q9
-	veor		q1, q1, q10
-	veor		q10, q13, q14
-	veor		q12, q2, q3
-	vand		q10, q10, q8
-	vand		q8, q12, q8
-	veor		q12, q13, q10
-	veor		q2, q2, q8
-	veor		q10, q14, q10
-	veor		q3, q3, q8
-	vadd.i32	q8, q4, q6
-	vsub.i32	q4, q4, q6
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vadd.i32	q6, q11, q12
-	vst1.8		{d8-d9}, [r5, : 128]!
-	vsub.i32	q4, q11, q12
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vadd.i32	q6, q0, q2
-	vst1.8		{d8-d9}, [r5, : 128]!
-	vsub.i32	q0, q0, q2
-	vst1.8		d12, [r2, : 64]
-	vadd.i32	q2, q5, q7
-	vst1.8		d0, [r5, : 64]
-	vsub.i32	q0, q5, q7
-	vst1.8		{d4-d5}, [r4, : 128]!
-	vadd.i32	q2, q9, q10
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vsub.i32	q0, q9, q10
-	vst1.8		{d4-d5}, [r4, : 128]!
-	vadd.i32	q2, q1, q3
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vsub.i32	q0, q1, q3
-	vst1.8		d4, [r4, : 64]
-	vst1.8		d0, [r6, : 64]
-	add		r2, sp, #512
-	add		r4, r3, #96
-	add		r5, r3, #144
-	vld1.8		{d0-d1}, [r2, : 128]
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4-d5}, [r5, : 128]!
-	vzip.i32	q1, q2
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vld1.8		{d8-d9}, [r5, : 128]!
-	vshl.i32	q5, q1, #1
-	vzip.i32	q3, q4
-	vshl.i32	q6, q2, #1
-	vld1.8		{d14}, [r4, : 64]
-	vshl.i32	q8, q3, #1
-	vld1.8		{d15}, [r5, : 64]
-	vshl.i32	q9, q4, #1
-	vmul.i32	d21, d7, d1
-	vtrn.32		d14, d15
-	vmul.i32	q11, q4, q0
-	vmul.i32	q0, q7, q0
-	vmull.s32	q12, d2, d2
-	vmlal.s32	q12, d11, d1
-	vmlal.s32	q12, d12, d0
-	vmlal.s32	q12, d13, d23
-	vmlal.s32	q12, d16, d22
-	vmlal.s32	q12, d7, d21
-	vmull.s32	q10, d2, d11
-	vmlal.s32	q10, d4, d1
-	vmlal.s32	q10, d13, d0
-	vmlal.s32	q10, d6, d23
-	vmlal.s32	q10, d17, d22
-	vmull.s32	q13, d10, d4
-	vmlal.s32	q13, d11, d3
-	vmlal.s32	q13, d13, d1
-	vmlal.s32	q13, d16, d0
-	vmlal.s32	q13, d17, d23
-	vmlal.s32	q13, d8, d22
-	vmull.s32	q1, d10, d5
-	vmlal.s32	q1, d11, d4
-	vmlal.s32	q1, d6, d1
-	vmlal.s32	q1, d17, d0
-	vmlal.s32	q1, d8, d23
-	vmull.s32	q14, d10, d6
-	vmlal.s32	q14, d11, d13
-	vmlal.s32	q14, d4, d4
-	vmlal.s32	q14, d17, d1
-	vmlal.s32	q14, d18, d0
-	vmlal.s32	q14, d9, d23
-	vmull.s32	q11, d10, d7
-	vmlal.s32	q11, d11, d6
-	vmlal.s32	q11, d12, d5
-	vmlal.s32	q11, d8, d1
-	vmlal.s32	q11, d19, d0
-	vmull.s32	q15, d10, d8
-	vmlal.s32	q15, d11, d17
-	vmlal.s32	q15, d12, d6
-	vmlal.s32	q15, d13, d5
-	vmlal.s32	q15, d19, d1
-	vmlal.s32	q15, d14, d0
-	vmull.s32	q2, d10, d9
-	vmlal.s32	q2, d11, d8
-	vmlal.s32	q2, d12, d7
-	vmlal.s32	q2, d13, d6
-	vmlal.s32	q2, d14, d1
-	vmull.s32	q0, d15, d1
-	vmlal.s32	q0, d10, d14
-	vmlal.s32	q0, d11, d19
-	vmlal.s32	q0, d12, d8
-	vmlal.s32	q0, d13, d17
-	vmlal.s32	q0, d6, d6
-	add		r2, sp, #480
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vmull.s32	q3, d16, d7
-	vmlal.s32	q3, d10, d15
-	vmlal.s32	q3, d11, d14
-	vmlal.s32	q3, d12, d9
-	vmlal.s32	q3, d13, d8
-	vld1.8		{d8-d9}, [r2, : 128]
-	vadd.i64	q5, q12, q9
-	vadd.i64	q6, q15, q9
-	vshr.s64	q5, q5, #26
-	vshr.s64	q6, q6, #26
-	vadd.i64	q7, q10, q5
-	vshl.i64	q5, q5, #26
-	vadd.i64	q8, q7, q4
-	vadd.i64	q2, q2, q6
-	vshl.i64	q6, q6, #26
-	vadd.i64	q10, q2, q4
-	vsub.i64	q5, q12, q5
-	vshr.s64	q8, q8, #25
-	vsub.i64	q6, q15, q6
-	vshr.s64	q10, q10, #25
-	vadd.i64	q12, q13, q8
-	vshl.i64	q8, q8, #25
-	vadd.i64	q13, q12, q9
-	vadd.i64	q0, q0, q10
-	vsub.i64	q7, q7, q8
-	vshr.s64	q8, q13, #26
-	vshl.i64	q10, q10, #25
-	vadd.i64	q13, q0, q9
-	vadd.i64	q1, q1, q8
-	vshl.i64	q8, q8, #26
-	vadd.i64	q15, q1, q4
-	vsub.i64	q2, q2, q10
-	vshr.s64	q10, q13, #26
-	vsub.i64	q8, q12, q8
-	vshr.s64	q12, q15, #25
-	vadd.i64	q3, q3, q10
-	vshl.i64	q10, q10, #26
-	vadd.i64	q13, q3, q4
-	vadd.i64	q14, q14, q12
-	add		r2, r3, #288
-	vshl.i64	q12, q12, #25
-	add		r4, r3, #336
-	vadd.i64	q15, q14, q9
-	add		r2, r2, #8
-	vsub.i64	q0, q0, q10
-	add		r4, r4, #8
-	vshr.s64	q10, q13, #25
-	vsub.i64	q1, q1, q12
-	vshr.s64	q12, q15, #26
-	vadd.i64	q13, q10, q10
-	vadd.i64	q11, q11, q12
-	vtrn.32		d16, d2
-	vshl.i64	q12, q12, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q11, q4
-	vadd.i64	q4, q5, q13
-	vst1.8		d16, [r2, : 64]!
-	vshl.i64	q5, q10, #4
-	vst1.8		d17, [r4, : 64]!
-	vsub.i64	q8, q14, q12
-	vshr.s64	q1, q1, #25
-	vadd.i64	q4, q4, q5
-	vadd.i64	q5, q6, q1
-	vshl.i64	q1, q1, #25
-	vadd.i64	q6, q5, q9
-	vadd.i64	q4, q4, q10
-	vshl.i64	q10, q10, #25
-	vadd.i64	q9, q4, q9
-	vsub.i64	q1, q11, q1
-	vshr.s64	q6, q6, #26
-	vsub.i64	q3, q3, q10
-	vtrn.32		d16, d2
-	vshr.s64	q9, q9, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q2, q6
-	vst1.8		d16, [r2, : 64]
-	vshl.i64	q2, q6, #26
-	vst1.8		d17, [r4, : 64]
-	vadd.i64	q6, q7, q9
-	vtrn.32		d0, d6
-	vshl.i64	q7, q9, #26
-	vtrn.32		d1, d7
-	vsub.i64	q2, q5, q2
-	add		r2, r2, #16
-	vsub.i64	q3, q4, q7
-	vst1.8		d0, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d1, [r4, : 64]
-	vtrn.32		d4, d2
-	vtrn.32		d5, d3
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d6, d12
-	vtrn.32		d7, d13
-	vst1.8		d4, [r2, : 64]
-	vst1.8		d5, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d6, [r2, : 64]
-	vst1.8		d7, [r4, : 64]
-	add		r2, r3, #240
-	add		r4, r3, #96
-	vld1.8		{d0-d1}, [r4, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4}, [r4, : 64]
-	add		r4, r3, #144
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vtrn.32		q0, q3
-	vld1.8		{d8-d9}, [r4, : 128]!
-	vshl.i32	q5, q0, #4
-	vtrn.32		q1, q4
-	vshl.i32	q6, q3, #4
-	vadd.i32	q5, q5, q0
-	vadd.i32	q6, q6, q3
-	vshl.i32	q7, q1, #4
-	vld1.8		{d5}, [r4, : 64]
-	vshl.i32	q8, q4, #4
-	vtrn.32		d4, d5
-	vadd.i32	q7, q7, q1
-	vadd.i32	q8, q8, q4
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vshl.i32	q10, q2, #4
-	vld1.8		{d22-d23}, [r2, : 128]!
-	vadd.i32	q10, q10, q2
-	vld1.8		{d24}, [r2, : 64]
-	vadd.i32	q5, q5, q0
-	add		r2, r3, #192
-	vld1.8		{d26-d27}, [r2, : 128]!
-	vadd.i32	q6, q6, q3
-	vld1.8		{d28-d29}, [r2, : 128]!
-	vadd.i32	q8, q8, q4
-	vld1.8		{d25}, [r2, : 64]
-	vadd.i32	q10, q10, q2
-	vtrn.32		q9, q13
-	vadd.i32	q7, q7, q1
-	vadd.i32	q5, q5, q0
-	vtrn.32		q11, q14
-	vadd.i32	q6, q6, q3
-	add		r2, sp, #528
-	vadd.i32	q10, q10, q2
-	vtrn.32		d24, d25
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q6, q13, #1
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vshl.i32	q10, q14, #1
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q15, q12, #1
-	vadd.i32	q8, q8, q4
-	vext.32		d10, d31, d30, #0
-	vadd.i32	q7, q7, q1
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q8, d18, d5
-	vmlal.s32	q8, d26, d4
-	vmlal.s32	q8, d19, d9
-	vmlal.s32	q8, d27, d3
-	vmlal.s32	q8, d22, d8
-	vmlal.s32	q8, d28, d2
-	vmlal.s32	q8, d23, d7
-	vmlal.s32	q8, d29, d1
-	vmlal.s32	q8, d24, d6
-	vmlal.s32	q8, d25, d0
-	vst1.8		{d14-d15}, [r2, : 128]!
-	vmull.s32	q2, d18, d4
-	vmlal.s32	q2, d12, d9
-	vmlal.s32	q2, d13, d8
-	vmlal.s32	q2, d19, d3
-	vmlal.s32	q2, d22, d2
-	vmlal.s32	q2, d23, d1
-	vmlal.s32	q2, d24, d0
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vmull.s32	q7, d18, d9
-	vmlal.s32	q7, d26, d3
-	vmlal.s32	q7, d19, d8
-	vmlal.s32	q7, d27, d2
-	vmlal.s32	q7, d22, d7
-	vmlal.s32	q7, d28, d1
-	vmlal.s32	q7, d23, d6
-	vmlal.s32	q7, d29, d0
-	vst1.8		{d10-d11}, [r2, : 128]!
-	vmull.s32	q5, d18, d3
-	vmlal.s32	q5, d19, d2
-	vmlal.s32	q5, d22, d1
-	vmlal.s32	q5, d23, d0
-	vmlal.s32	q5, d12, d8
-	vst1.8		{d16-d17}, [r2, : 128]
-	vmull.s32	q4, d18, d8
-	vmlal.s32	q4, d26, d2
-	vmlal.s32	q4, d19, d7
-	vmlal.s32	q4, d27, d1
-	vmlal.s32	q4, d22, d6
-	vmlal.s32	q4, d28, d0
-	vmull.s32	q8, d18, d7
-	vmlal.s32	q8, d26, d1
-	vmlal.s32	q8, d19, d6
-	vmlal.s32	q8, d27, d0
-	add		r2, sp, #544
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q7, d24, d21
-	vmlal.s32	q7, d25, d20
-	vmlal.s32	q4, d23, d21
-	vmlal.s32	q4, d29, d20
-	vmlal.s32	q8, d22, d21
-	vmlal.s32	q8, d28, d20
-	vmlal.s32	q5, d24, d20
-	vst1.8		{d14-d15}, [r2, : 128]
-	vmull.s32	q7, d18, d6
-	vmlal.s32	q7, d26, d0
-	add		r2, sp, #624
-	vld1.8		{d30-d31}, [r2, : 128]
-	vmlal.s32	q2, d30, d21
-	vmlal.s32	q7, d19, d21
-	vmlal.s32	q7, d27, d20
-	add		r2, sp, #592
-	vld1.8		{d26-d27}, [r2, : 128]
-	vmlal.s32	q4, d25, d27
-	vmlal.s32	q8, d29, d27
-	vmlal.s32	q8, d25, d26
-	vmlal.s32	q7, d28, d27
-	vmlal.s32	q7, d29, d26
-	add		r2, sp, #576
-	vld1.8		{d28-d29}, [r2, : 128]
-	vmlal.s32	q4, d24, d29
-	vmlal.s32	q8, d23, d29
-	vmlal.s32	q8, d24, d28
-	vmlal.s32	q7, d22, d29
-	vmlal.s32	q7, d23, d28
-	vst1.8		{d8-d9}, [r2, : 128]
-	add		r2, sp, #528
-	vld1.8		{d8-d9}, [r2, : 128]
-	vmlal.s32	q7, d24, d9
-	vmlal.s32	q7, d25, d31
-	vmull.s32	q1, d18, d2
-	vmlal.s32	q1, d19, d1
-	vmlal.s32	q1, d22, d0
-	vmlal.s32	q1, d24, d27
-	vmlal.s32	q1, d23, d20
-	vmlal.s32	q1, d12, d7
-	vmlal.s32	q1, d13, d6
-	vmull.s32	q6, d18, d1
-	vmlal.s32	q6, d19, d0
-	vmlal.s32	q6, d23, d27
-	vmlal.s32	q6, d22, d20
-	vmlal.s32	q6, d24, d26
-	vmull.s32	q0, d18, d0
-	vmlal.s32	q0, d22, d27
-	vmlal.s32	q0, d23, d26
-	vmlal.s32	q0, d24, d31
-	vmlal.s32	q0, d19, d20
-	add		r2, sp, #608
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q2, d18, d7
-	vmlal.s32	q5, d18, d6
-	vmlal.s32	q1, d18, d21
-	vmlal.s32	q0, d18, d28
-	vmlal.s32	q6, d18, d29
-	vmlal.s32	q2, d19, d6
-	vmlal.s32	q5, d19, d21
-	vmlal.s32	q1, d19, d29
-	vmlal.s32	q0, d19, d9
-	vmlal.s32	q6, d19, d28
-	add		r2, sp, #560
-	vld1.8		{d18-d19}, [r2, : 128]
-	add		r2, sp, #480
-	vld1.8		{d22-d23}, [r2, : 128]
-	vmlal.s32	q5, d19, d7
-	vmlal.s32	q0, d18, d21
-	vmlal.s32	q0, d19, d29
-	vmlal.s32	q6, d18, d6
-	add		r2, sp, #496
-	vld1.8		{d6-d7}, [r2, : 128]
-	vmlal.s32	q6, d19, d21
-	add		r2, sp, #544
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q0, d30, d8
-	add		r2, sp, #640
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q5, d30, d29
-	add		r2, sp, #576
-	vld1.8		{d24-d25}, [r2, : 128]
-	vmlal.s32	q1, d30, d28
-	vadd.i64	q13, q0, q11
-	vadd.i64	q14, q5, q11
-	vmlal.s32	q6, d30, d9
-	vshr.s64	q4, q13, #26
-	vshr.s64	q13, q14, #26
-	vadd.i64	q7, q7, q4
-	vshl.i64	q4, q4, #26
-	vadd.i64	q14, q7, q3
-	vadd.i64	q9, q9, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q9, q3
-	vsub.i64	q0, q0, q4
-	vshr.s64	q4, q14, #25
-	vsub.i64	q5, q5, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q4
-	vshl.i64	q4, q4, #25
-	vadd.i64	q14, q6, q11
-	vadd.i64	q2, q2, q13
-	vsub.i64	q4, q7, q4
-	vshr.s64	q7, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q11
-	vadd.i64	q8, q8, q7
-	vshl.i64	q7, q7, #26
-	vadd.i64	q15, q8, q3
-	vsub.i64	q9, q9, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q7
-	vshr.s64	q7, q15, #25
-	vadd.i64	q10, q10, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q10, q3
-	vadd.i64	q1, q1, q7
-	add		r2, r3, #144
-	vshl.i64	q7, q7, #25
-	add		r4, r3, #96
-	vadd.i64	q15, q1, q11
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	add		r4, r4, #8
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q8, q7
-	vshr.s64	q8, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q12, q12, q8
-	vtrn.32		d12, d14
-	vshl.i64	q8, q8, #26
-	vtrn.32		d13, d15
-	vadd.i64	q3, q12, q3
-	vadd.i64	q0, q0, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q7, q13, #4
-	vst1.8		d13, [r4, : 64]!
-	vsub.i64	q1, q1, q8
-	vshr.s64	q3, q3, #25
-	vadd.i64	q0, q0, q7
-	vadd.i64	q5, q5, q3
-	vshl.i64	q3, q3, #25
-	vadd.i64	q6, q5, q11
-	vadd.i64	q0, q0, q13
-	vshl.i64	q7, q13, #25
-	vadd.i64	q8, q0, q11
-	vsub.i64	q3, q12, q3
-	vshr.s64	q6, q6, #26
-	vsub.i64	q7, q10, q7
-	vtrn.32		d2, d6
-	vshr.s64	q8, q8, #26
-	vtrn.32		d3, d7
-	vadd.i64	q3, q9, q6
-	vst1.8		d2, [r2, : 64]
-	vshl.i64	q6, q6, #26
-	vst1.8		d3, [r4, : 64]
-	vadd.i64	q1, q4, q8
-	vtrn.32		d4, d14
-	vshl.i64	q4, q8, #26
-	vtrn.32		d5, d15
-	vsub.i64	q5, q5, q6
-	add		r2, r2, #16
-	vsub.i64	q0, q0, q4
-	vst1.8		d4, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d5, [r4, : 64]
-	vtrn.32		d10, d6
-	vtrn.32		d11, d7
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d0, d2
-	vtrn.32		d1, d3
-	vst1.8		d10, [r2, : 64]
-	vst1.8		d11, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d0, [r2, : 64]
-	vst1.8		d1, [r4, : 64]
-	add		r2, r3, #288
-	add		r4, r3, #336
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vsub.i32	q0, q0, q1
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4-d5}, [r4, : 128]!
-	vsub.i32	q1, q1, q2
-	add		r5, r3, #240
-	vld1.8		{d4}, [r2, : 64]
-	vld1.8		{d6}, [r4, : 64]
-	vsub.i32	q2, q2, q3
-	vst1.8		{d0-d1}, [r5, : 128]!
-	vst1.8		{d2-d3}, [r5, : 128]!
-	vst1.8		d4, [r5, : 64]
-	add		r2, r3, #144
-	add		r4, r3, #96
-	add		r5, r3, #144
-	add		r6, r3, #192
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vsub.i32	q2, q0, q1
-	vadd.i32	q0, q0, q1
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vsub.i32	q4, q1, q3
-	vadd.i32	q1, q1, q3
-	vld1.8		{d6}, [r2, : 64]
-	vld1.8		{d10}, [r4, : 64]
-	vsub.i32	q6, q3, q5
-	vadd.i32	q3, q3, q5
-	vst1.8		{d4-d5}, [r5, : 128]!
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vst1.8		{d8-d9}, [r5, : 128]!
-	vst1.8		{d2-d3}, [r6, : 128]!
-	vst1.8		d12, [r5, : 64]
-	vst1.8		d6, [r6, : 64]
-	add		r2, r3, #0
-	add		r4, r3, #240
-	vld1.8		{d0-d1}, [r4, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4}, [r4, : 64]
-	add		r4, r3, #336
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vtrn.32		q0, q3
-	vld1.8		{d8-d9}, [r4, : 128]!
-	vshl.i32	q5, q0, #4
-	vtrn.32		q1, q4
-	vshl.i32	q6, q3, #4
-	vadd.i32	q5, q5, q0
-	vadd.i32	q6, q6, q3
-	vshl.i32	q7, q1, #4
-	vld1.8		{d5}, [r4, : 64]
-	vshl.i32	q8, q4, #4
-	vtrn.32		d4, d5
-	vadd.i32	q7, q7, q1
-	vadd.i32	q8, q8, q4
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vshl.i32	q10, q2, #4
-	vld1.8		{d22-d23}, [r2, : 128]!
-	vadd.i32	q10, q10, q2
-	vld1.8		{d24}, [r2, : 64]
-	vadd.i32	q5, q5, q0
-	add		r2, r3, #288
-	vld1.8		{d26-d27}, [r2, : 128]!
-	vadd.i32	q6, q6, q3
-	vld1.8		{d28-d29}, [r2, : 128]!
-	vadd.i32	q8, q8, q4
-	vld1.8		{d25}, [r2, : 64]
-	vadd.i32	q10, q10, q2
-	vtrn.32		q9, q13
-	vadd.i32	q7, q7, q1
-	vadd.i32	q5, q5, q0
-	vtrn.32		q11, q14
-	vadd.i32	q6, q6, q3
-	add		r2, sp, #528
-	vadd.i32	q10, q10, q2
-	vtrn.32		d24, d25
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q6, q13, #1
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vshl.i32	q10, q14, #1
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q15, q12, #1
-	vadd.i32	q8, q8, q4
-	vext.32		d10, d31, d30, #0
-	vadd.i32	q7, q7, q1
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q8, d18, d5
-	vmlal.s32	q8, d26, d4
-	vmlal.s32	q8, d19, d9
-	vmlal.s32	q8, d27, d3
-	vmlal.s32	q8, d22, d8
-	vmlal.s32	q8, d28, d2
-	vmlal.s32	q8, d23, d7
-	vmlal.s32	q8, d29, d1
-	vmlal.s32	q8, d24, d6
-	vmlal.s32	q8, d25, d0
-	vst1.8		{d14-d15}, [r2, : 128]!
-	vmull.s32	q2, d18, d4
-	vmlal.s32	q2, d12, d9
-	vmlal.s32	q2, d13, d8
-	vmlal.s32	q2, d19, d3
-	vmlal.s32	q2, d22, d2
-	vmlal.s32	q2, d23, d1
-	vmlal.s32	q2, d24, d0
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vmull.s32	q7, d18, d9
-	vmlal.s32	q7, d26, d3
-	vmlal.s32	q7, d19, d8
-	vmlal.s32	q7, d27, d2
-	vmlal.s32	q7, d22, d7
-	vmlal.s32	q7, d28, d1
-	vmlal.s32	q7, d23, d6
-	vmlal.s32	q7, d29, d0
-	vst1.8		{d10-d11}, [r2, : 128]!
-	vmull.s32	q5, d18, d3
-	vmlal.s32	q5, d19, d2
-	vmlal.s32	q5, d22, d1
-	vmlal.s32	q5, d23, d0
-	vmlal.s32	q5, d12, d8
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q4, d18, d8
-	vmlal.s32	q4, d26, d2
-	vmlal.s32	q4, d19, d7
-	vmlal.s32	q4, d27, d1
-	vmlal.s32	q4, d22, d6
-	vmlal.s32	q4, d28, d0
-	vmull.s32	q8, d18, d7
-	vmlal.s32	q8, d26, d1
-	vmlal.s32	q8, d19, d6
-	vmlal.s32	q8, d27, d0
-	add		r2, sp, #544
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q7, d24, d21
-	vmlal.s32	q7, d25, d20
-	vmlal.s32	q4, d23, d21
-	vmlal.s32	q4, d29, d20
-	vmlal.s32	q8, d22, d21
-	vmlal.s32	q8, d28, d20
-	vmlal.s32	q5, d24, d20
-	vst1.8		{d14-d15}, [r2, : 128]
-	vmull.s32	q7, d18, d6
-	vmlal.s32	q7, d26, d0
-	add		r2, sp, #624
-	vld1.8		{d30-d31}, [r2, : 128]
-	vmlal.s32	q2, d30, d21
-	vmlal.s32	q7, d19, d21
-	vmlal.s32	q7, d27, d20
-	add		r2, sp, #592
-	vld1.8		{d26-d27}, [r2, : 128]
-	vmlal.s32	q4, d25, d27
-	vmlal.s32	q8, d29, d27
-	vmlal.s32	q8, d25, d26
-	vmlal.s32	q7, d28, d27
-	vmlal.s32	q7, d29, d26
-	add		r2, sp, #576
-	vld1.8		{d28-d29}, [r2, : 128]
-	vmlal.s32	q4, d24, d29
-	vmlal.s32	q8, d23, d29
-	vmlal.s32	q8, d24, d28
-	vmlal.s32	q7, d22, d29
-	vmlal.s32	q7, d23, d28
-	vst1.8		{d8-d9}, [r2, : 128]
-	add		r2, sp, #528
-	vld1.8		{d8-d9}, [r2, : 128]
-	vmlal.s32	q7, d24, d9
-	vmlal.s32	q7, d25, d31
-	vmull.s32	q1, d18, d2
-	vmlal.s32	q1, d19, d1
-	vmlal.s32	q1, d22, d0
-	vmlal.s32	q1, d24, d27
-	vmlal.s32	q1, d23, d20
-	vmlal.s32	q1, d12, d7
-	vmlal.s32	q1, d13, d6
-	vmull.s32	q6, d18, d1
-	vmlal.s32	q6, d19, d0
-	vmlal.s32	q6, d23, d27
-	vmlal.s32	q6, d22, d20
-	vmlal.s32	q6, d24, d26
-	vmull.s32	q0, d18, d0
-	vmlal.s32	q0, d22, d27
-	vmlal.s32	q0, d23, d26
-	vmlal.s32	q0, d24, d31
-	vmlal.s32	q0, d19, d20
-	add		r2, sp, #608
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q2, d18, d7
-	vmlal.s32	q5, d18, d6
-	vmlal.s32	q1, d18, d21
-	vmlal.s32	q0, d18, d28
-	vmlal.s32	q6, d18, d29
-	vmlal.s32	q2, d19, d6
-	vmlal.s32	q5, d19, d21
-	vmlal.s32	q1, d19, d29
-	vmlal.s32	q0, d19, d9
-	vmlal.s32	q6, d19, d28
-	add		r2, sp, #560
-	vld1.8		{d18-d19}, [r2, : 128]
-	add		r2, sp, #480
-	vld1.8		{d22-d23}, [r2, : 128]
-	vmlal.s32	q5, d19, d7
-	vmlal.s32	q0, d18, d21
-	vmlal.s32	q0, d19, d29
-	vmlal.s32	q6, d18, d6
-	add		r2, sp, #496
-	vld1.8		{d6-d7}, [r2, : 128]
-	vmlal.s32	q6, d19, d21
-	add		r2, sp, #544
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q0, d30, d8
-	add		r2, sp, #640
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q5, d30, d29
-	add		r2, sp, #576
-	vld1.8		{d24-d25}, [r2, : 128]
-	vmlal.s32	q1, d30, d28
-	vadd.i64	q13, q0, q11
-	vadd.i64	q14, q5, q11
-	vmlal.s32	q6, d30, d9
-	vshr.s64	q4, q13, #26
-	vshr.s64	q13, q14, #26
-	vadd.i64	q7, q7, q4
-	vshl.i64	q4, q4, #26
-	vadd.i64	q14, q7, q3
-	vadd.i64	q9, q9, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q9, q3
-	vsub.i64	q0, q0, q4
-	vshr.s64	q4, q14, #25
-	vsub.i64	q5, q5, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q4
-	vshl.i64	q4, q4, #25
-	vadd.i64	q14, q6, q11
-	vadd.i64	q2, q2, q13
-	vsub.i64	q4, q7, q4
-	vshr.s64	q7, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q11
-	vadd.i64	q8, q8, q7
-	vshl.i64	q7, q7, #26
-	vadd.i64	q15, q8, q3
-	vsub.i64	q9, q9, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q7
-	vshr.s64	q7, q15, #25
-	vadd.i64	q10, q10, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q10, q3
-	vadd.i64	q1, q1, q7
-	add		r2, r3, #288
-	vshl.i64	q7, q7, #25
-	add		r4, r3, #96
-	vadd.i64	q15, q1, q11
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	add		r4, r4, #8
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q8, q7
-	vshr.s64	q8, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q12, q12, q8
-	vtrn.32		d12, d14
-	vshl.i64	q8, q8, #26
-	vtrn.32		d13, d15
-	vadd.i64	q3, q12, q3
-	vadd.i64	q0, q0, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q7, q13, #4
-	vst1.8		d13, [r4, : 64]!
-	vsub.i64	q1, q1, q8
-	vshr.s64	q3, q3, #25
-	vadd.i64	q0, q0, q7
-	vadd.i64	q5, q5, q3
-	vshl.i64	q3, q3, #25
-	vadd.i64	q6, q5, q11
-	vadd.i64	q0, q0, q13
-	vshl.i64	q7, q13, #25
-	vadd.i64	q8, q0, q11
-	vsub.i64	q3, q12, q3
-	vshr.s64	q6, q6, #26
-	vsub.i64	q7, q10, q7
-	vtrn.32		d2, d6
-	vshr.s64	q8, q8, #26
-	vtrn.32		d3, d7
-	vadd.i64	q3, q9, q6
-	vst1.8		d2, [r2, : 64]
-	vshl.i64	q6, q6, #26
-	vst1.8		d3, [r4, : 64]
-	vadd.i64	q1, q4, q8
-	vtrn.32		d4, d14
-	vshl.i64	q4, q8, #26
-	vtrn.32		d5, d15
-	vsub.i64	q5, q5, q6
-	add		r2, r2, #16
-	vsub.i64	q0, q0, q4
-	vst1.8		d4, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d5, [r4, : 64]
-	vtrn.32		d10, d6
-	vtrn.32		d11, d7
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d0, d2
-	vtrn.32		d1, d3
-	vst1.8		d10, [r2, : 64]
-	vst1.8		d11, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d0, [r2, : 64]
-	vst1.8		d1, [r4, : 64]
-	add		r2, sp, #512
-	add		r4, r3, #144
-	add		r5, r3, #192
-	vld1.8		{d0-d1}, [r2, : 128]
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4-d5}, [r5, : 128]!
-	vzip.i32	q1, q2
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vld1.8		{d8-d9}, [r5, : 128]!
-	vshl.i32	q5, q1, #1
-	vzip.i32	q3, q4
-	vshl.i32	q6, q2, #1
-	vld1.8		{d14}, [r4, : 64]
-	vshl.i32	q8, q3, #1
-	vld1.8		{d15}, [r5, : 64]
-	vshl.i32	q9, q4, #1
-	vmul.i32	d21, d7, d1
-	vtrn.32		d14, d15
-	vmul.i32	q11, q4, q0
-	vmul.i32	q0, q7, q0
-	vmull.s32	q12, d2, d2
-	vmlal.s32	q12, d11, d1
-	vmlal.s32	q12, d12, d0
-	vmlal.s32	q12, d13, d23
-	vmlal.s32	q12, d16, d22
-	vmlal.s32	q12, d7, d21
-	vmull.s32	q10, d2, d11
-	vmlal.s32	q10, d4, d1
-	vmlal.s32	q10, d13, d0
-	vmlal.s32	q10, d6, d23
-	vmlal.s32	q10, d17, d22
-	vmull.s32	q13, d10, d4
-	vmlal.s32	q13, d11, d3
-	vmlal.s32	q13, d13, d1
-	vmlal.s32	q13, d16, d0
-	vmlal.s32	q13, d17, d23
-	vmlal.s32	q13, d8, d22
-	vmull.s32	q1, d10, d5
-	vmlal.s32	q1, d11, d4
-	vmlal.s32	q1, d6, d1
-	vmlal.s32	q1, d17, d0
-	vmlal.s32	q1, d8, d23
-	vmull.s32	q14, d10, d6
-	vmlal.s32	q14, d11, d13
-	vmlal.s32	q14, d4, d4
-	vmlal.s32	q14, d17, d1
-	vmlal.s32	q14, d18, d0
-	vmlal.s32	q14, d9, d23
-	vmull.s32	q11, d10, d7
-	vmlal.s32	q11, d11, d6
-	vmlal.s32	q11, d12, d5
-	vmlal.s32	q11, d8, d1
-	vmlal.s32	q11, d19, d0
-	vmull.s32	q15, d10, d8
-	vmlal.s32	q15, d11, d17
-	vmlal.s32	q15, d12, d6
-	vmlal.s32	q15, d13, d5
-	vmlal.s32	q15, d19, d1
-	vmlal.s32	q15, d14, d0
-	vmull.s32	q2, d10, d9
-	vmlal.s32	q2, d11, d8
-	vmlal.s32	q2, d12, d7
-	vmlal.s32	q2, d13, d6
-	vmlal.s32	q2, d14, d1
-	vmull.s32	q0, d15, d1
-	vmlal.s32	q0, d10, d14
-	vmlal.s32	q0, d11, d19
-	vmlal.s32	q0, d12, d8
-	vmlal.s32	q0, d13, d17
-	vmlal.s32	q0, d6, d6
-	add		r2, sp, #480
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vmull.s32	q3, d16, d7
-	vmlal.s32	q3, d10, d15
-	vmlal.s32	q3, d11, d14
-	vmlal.s32	q3, d12, d9
-	vmlal.s32	q3, d13, d8
-	vld1.8		{d8-d9}, [r2, : 128]
-	vadd.i64	q5, q12, q9
-	vadd.i64	q6, q15, q9
-	vshr.s64	q5, q5, #26
-	vshr.s64	q6, q6, #26
-	vadd.i64	q7, q10, q5
-	vshl.i64	q5, q5, #26
-	vadd.i64	q8, q7, q4
-	vadd.i64	q2, q2, q6
-	vshl.i64	q6, q6, #26
-	vadd.i64	q10, q2, q4
-	vsub.i64	q5, q12, q5
-	vshr.s64	q8, q8, #25
-	vsub.i64	q6, q15, q6
-	vshr.s64	q10, q10, #25
-	vadd.i64	q12, q13, q8
-	vshl.i64	q8, q8, #25
-	vadd.i64	q13, q12, q9
-	vadd.i64	q0, q0, q10
-	vsub.i64	q7, q7, q8
-	vshr.s64	q8, q13, #26
-	vshl.i64	q10, q10, #25
-	vadd.i64	q13, q0, q9
-	vadd.i64	q1, q1, q8
-	vshl.i64	q8, q8, #26
-	vadd.i64	q15, q1, q4
-	vsub.i64	q2, q2, q10
-	vshr.s64	q10, q13, #26
-	vsub.i64	q8, q12, q8
-	vshr.s64	q12, q15, #25
-	vadd.i64	q3, q3, q10
-	vshl.i64	q10, q10, #26
-	vadd.i64	q13, q3, q4
-	vadd.i64	q14, q14, q12
-	add		r2, r3, #144
-	vshl.i64	q12, q12, #25
-	add		r4, r3, #192
-	vadd.i64	q15, q14, q9
-	add		r2, r2, #8
-	vsub.i64	q0, q0, q10
-	add		r4, r4, #8
-	vshr.s64	q10, q13, #25
-	vsub.i64	q1, q1, q12
-	vshr.s64	q12, q15, #26
-	vadd.i64	q13, q10, q10
-	vadd.i64	q11, q11, q12
-	vtrn.32		d16, d2
-	vshl.i64	q12, q12, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q11, q4
-	vadd.i64	q4, q5, q13
-	vst1.8		d16, [r2, : 64]!
-	vshl.i64	q5, q10, #4
-	vst1.8		d17, [r4, : 64]!
-	vsub.i64	q8, q14, q12
-	vshr.s64	q1, q1, #25
-	vadd.i64	q4, q4, q5
-	vadd.i64	q5, q6, q1
-	vshl.i64	q1, q1, #25
-	vadd.i64	q6, q5, q9
-	vadd.i64	q4, q4, q10
-	vshl.i64	q10, q10, #25
-	vadd.i64	q9, q4, q9
-	vsub.i64	q1, q11, q1
-	vshr.s64	q6, q6, #26
-	vsub.i64	q3, q3, q10
-	vtrn.32		d16, d2
-	vshr.s64	q9, q9, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q2, q6
-	vst1.8		d16, [r2, : 64]
-	vshl.i64	q2, q6, #26
-	vst1.8		d17, [r4, : 64]
-	vadd.i64	q6, q7, q9
-	vtrn.32		d0, d6
-	vshl.i64	q7, q9, #26
-	vtrn.32		d1, d7
-	vsub.i64	q2, q5, q2
-	add		r2, r2, #16
-	vsub.i64	q3, q4, q7
-	vst1.8		d0, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d1, [r4, : 64]
-	vtrn.32		d4, d2
-	vtrn.32		d5, d3
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d6, d12
-	vtrn.32		d7, d13
-	vst1.8		d4, [r2, : 64]
-	vst1.8		d5, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d6, [r2, : 64]
-	vst1.8		d7, [r4, : 64]
-	add		r2, r3, #336
-	add		r4, r3, #288
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vadd.i32	q0, q0, q1
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4-d5}, [r4, : 128]!
-	vadd.i32	q1, q1, q2
-	add		r5, r3, #288
-	vld1.8		{d4}, [r2, : 64]
-	vld1.8		{d6}, [r4, : 64]
-	vadd.i32	q2, q2, q3
-	vst1.8		{d0-d1}, [r5, : 128]!
-	vst1.8		{d2-d3}, [r5, : 128]!
-	vst1.8		d4, [r5, : 64]
-	add		r2, r3, #48
-	add		r4, r3, #144
-	vld1.8		{d0-d1}, [r4, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4}, [r4, : 64]
-	add		r4, r3, #288
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vtrn.32		q0, q3
-	vld1.8		{d8-d9}, [r4, : 128]!
-	vshl.i32	q5, q0, #4
-	vtrn.32		q1, q4
-	vshl.i32	q6, q3, #4
-	vadd.i32	q5, q5, q0
-	vadd.i32	q6, q6, q3
-	vshl.i32	q7, q1, #4
-	vld1.8		{d5}, [r4, : 64]
-	vshl.i32	q8, q4, #4
-	vtrn.32		d4, d5
-	vadd.i32	q7, q7, q1
-	vadd.i32	q8, q8, q4
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vshl.i32	q10, q2, #4
-	vld1.8		{d22-d23}, [r2, : 128]!
-	vadd.i32	q10, q10, q2
-	vld1.8		{d24}, [r2, : 64]
-	vadd.i32	q5, q5, q0
-	add		r2, r3, #240
-	vld1.8		{d26-d27}, [r2, : 128]!
-	vadd.i32	q6, q6, q3
-	vld1.8		{d28-d29}, [r2, : 128]!
-	vadd.i32	q8, q8, q4
-	vld1.8		{d25}, [r2, : 64]
-	vadd.i32	q10, q10, q2
-	vtrn.32		q9, q13
-	vadd.i32	q7, q7, q1
-	vadd.i32	q5, q5, q0
-	vtrn.32		q11, q14
-	vadd.i32	q6, q6, q3
-	add		r2, sp, #528
-	vadd.i32	q10, q10, q2
-	vtrn.32		d24, d25
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q6, q13, #1
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vshl.i32	q10, q14, #1
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q15, q12, #1
-	vadd.i32	q8, q8, q4
-	vext.32		d10, d31, d30, #0
-	vadd.i32	q7, q7, q1
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q8, d18, d5
-	vmlal.s32	q8, d26, d4
-	vmlal.s32	q8, d19, d9
-	vmlal.s32	q8, d27, d3
-	vmlal.s32	q8, d22, d8
-	vmlal.s32	q8, d28, d2
-	vmlal.s32	q8, d23, d7
-	vmlal.s32	q8, d29, d1
-	vmlal.s32	q8, d24, d6
-	vmlal.s32	q8, d25, d0
-	vst1.8		{d14-d15}, [r2, : 128]!
-	vmull.s32	q2, d18, d4
-	vmlal.s32	q2, d12, d9
-	vmlal.s32	q2, d13, d8
-	vmlal.s32	q2, d19, d3
-	vmlal.s32	q2, d22, d2
-	vmlal.s32	q2, d23, d1
-	vmlal.s32	q2, d24, d0
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vmull.s32	q7, d18, d9
-	vmlal.s32	q7, d26, d3
-	vmlal.s32	q7, d19, d8
-	vmlal.s32	q7, d27, d2
-	vmlal.s32	q7, d22, d7
-	vmlal.s32	q7, d28, d1
-	vmlal.s32	q7, d23, d6
-	vmlal.s32	q7, d29, d0
-	vst1.8		{d10-d11}, [r2, : 128]!
-	vmull.s32	q5, d18, d3
-	vmlal.s32	q5, d19, d2
-	vmlal.s32	q5, d22, d1
-	vmlal.s32	q5, d23, d0
-	vmlal.s32	q5, d12, d8
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q4, d18, d8
-	vmlal.s32	q4, d26, d2
-	vmlal.s32	q4, d19, d7
-	vmlal.s32	q4, d27, d1
-	vmlal.s32	q4, d22, d6
-	vmlal.s32	q4, d28, d0
-	vmull.s32	q8, d18, d7
-	vmlal.s32	q8, d26, d1
-	vmlal.s32	q8, d19, d6
-	vmlal.s32	q8, d27, d0
-	add		r2, sp, #544
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q7, d24, d21
-	vmlal.s32	q7, d25, d20
-	vmlal.s32	q4, d23, d21
-	vmlal.s32	q4, d29, d20
-	vmlal.s32	q8, d22, d21
-	vmlal.s32	q8, d28, d20
-	vmlal.s32	q5, d24, d20
-	vst1.8		{d14-d15}, [r2, : 128]
-	vmull.s32	q7, d18, d6
-	vmlal.s32	q7, d26, d0
-	add		r2, sp, #624
-	vld1.8		{d30-d31}, [r2, : 128]
-	vmlal.s32	q2, d30, d21
-	vmlal.s32	q7, d19, d21
-	vmlal.s32	q7, d27, d20
-	add		r2, sp, #592
-	vld1.8		{d26-d27}, [r2, : 128]
-	vmlal.s32	q4, d25, d27
-	vmlal.s32	q8, d29, d27
-	vmlal.s32	q8, d25, d26
-	vmlal.s32	q7, d28, d27
-	vmlal.s32	q7, d29, d26
-	add		r2, sp, #576
-	vld1.8		{d28-d29}, [r2, : 128]
-	vmlal.s32	q4, d24, d29
-	vmlal.s32	q8, d23, d29
-	vmlal.s32	q8, d24, d28
-	vmlal.s32	q7, d22, d29
-	vmlal.s32	q7, d23, d28
-	vst1.8		{d8-d9}, [r2, : 128]
-	add		r2, sp, #528
-	vld1.8		{d8-d9}, [r2, : 128]
-	vmlal.s32	q7, d24, d9
-	vmlal.s32	q7, d25, d31
-	vmull.s32	q1, d18, d2
-	vmlal.s32	q1, d19, d1
-	vmlal.s32	q1, d22, d0
-	vmlal.s32	q1, d24, d27
-	vmlal.s32	q1, d23, d20
-	vmlal.s32	q1, d12, d7
-	vmlal.s32	q1, d13, d6
-	vmull.s32	q6, d18, d1
-	vmlal.s32	q6, d19, d0
-	vmlal.s32	q6, d23, d27
-	vmlal.s32	q6, d22, d20
-	vmlal.s32	q6, d24, d26
-	vmull.s32	q0, d18, d0
-	vmlal.s32	q0, d22, d27
-	vmlal.s32	q0, d23, d26
-	vmlal.s32	q0, d24, d31
-	vmlal.s32	q0, d19, d20
-	add		r2, sp, #608
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q2, d18, d7
-	vmlal.s32	q5, d18, d6
-	vmlal.s32	q1, d18, d21
-	vmlal.s32	q0, d18, d28
-	vmlal.s32	q6, d18, d29
-	vmlal.s32	q2, d19, d6
-	vmlal.s32	q5, d19, d21
-	vmlal.s32	q1, d19, d29
-	vmlal.s32	q0, d19, d9
-	vmlal.s32	q6, d19, d28
-	add		r2, sp, #560
-	vld1.8		{d18-d19}, [r2, : 128]
-	add		r2, sp, #480
-	vld1.8		{d22-d23}, [r2, : 128]
-	vmlal.s32	q5, d19, d7
-	vmlal.s32	q0, d18, d21
-	vmlal.s32	q0, d19, d29
-	vmlal.s32	q6, d18, d6
-	add		r2, sp, #496
-	vld1.8		{d6-d7}, [r2, : 128]
-	vmlal.s32	q6, d19, d21
-	add		r2, sp, #544
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q0, d30, d8
-	add		r2, sp, #640
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q5, d30, d29
-	add		r2, sp, #576
-	vld1.8		{d24-d25}, [r2, : 128]
-	vmlal.s32	q1, d30, d28
-	vadd.i64	q13, q0, q11
-	vadd.i64	q14, q5, q11
-	vmlal.s32	q6, d30, d9
-	vshr.s64	q4, q13, #26
-	vshr.s64	q13, q14, #26
-	vadd.i64	q7, q7, q4
-	vshl.i64	q4, q4, #26
-	vadd.i64	q14, q7, q3
-	vadd.i64	q9, q9, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q9, q3
-	vsub.i64	q0, q0, q4
-	vshr.s64	q4, q14, #25
-	vsub.i64	q5, q5, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q4
-	vshl.i64	q4, q4, #25
-	vadd.i64	q14, q6, q11
-	vadd.i64	q2, q2, q13
-	vsub.i64	q4, q7, q4
-	vshr.s64	q7, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q11
-	vadd.i64	q8, q8, q7
-	vshl.i64	q7, q7, #26
-	vadd.i64	q15, q8, q3
-	vsub.i64	q9, q9, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q7
-	vshr.s64	q7, q15, #25
-	vadd.i64	q10, q10, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q10, q3
-	vadd.i64	q1, q1, q7
-	add		r2, r3, #240
-	vshl.i64	q7, q7, #25
-	add		r4, r3, #144
-	vadd.i64	q15, q1, q11
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	add		r4, r4, #8
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q8, q7
-	vshr.s64	q8, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q12, q12, q8
-	vtrn.32		d12, d14
-	vshl.i64	q8, q8, #26
-	vtrn.32		d13, d15
-	vadd.i64	q3, q12, q3
-	vadd.i64	q0, q0, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q7, q13, #4
-	vst1.8		d13, [r4, : 64]!
-	vsub.i64	q1, q1, q8
-	vshr.s64	q3, q3, #25
-	vadd.i64	q0, q0, q7
-	vadd.i64	q5, q5, q3
-	vshl.i64	q3, q3, #25
-	vadd.i64	q6, q5, q11
-	vadd.i64	q0, q0, q13
-	vshl.i64	q7, q13, #25
-	vadd.i64	q8, q0, q11
-	vsub.i64	q3, q12, q3
-	vshr.s64	q6, q6, #26
-	vsub.i64	q7, q10, q7
-	vtrn.32		d2, d6
-	vshr.s64	q8, q8, #26
-	vtrn.32		d3, d7
-	vadd.i64	q3, q9, q6
-	vst1.8		d2, [r2, : 64]
-	vshl.i64	q6, q6, #26
-	vst1.8		d3, [r4, : 64]
-	vadd.i64	q1, q4, q8
-	vtrn.32		d4, d14
-	vshl.i64	q4, q8, #26
-	vtrn.32		d5, d15
-	vsub.i64	q5, q5, q6
-	add		r2, r2, #16
-	vsub.i64	q0, q0, q4
-	vst1.8		d4, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d5, [r4, : 64]
-	vtrn.32		d10, d6
-	vtrn.32		d11, d7
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d0, d2
-	vtrn.32		d1, d3
-	vst1.8		d10, [r2, : 64]
-	vst1.8		d11, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d0, [r2, : 64]
-	vst1.8		d1, [r4, : 64]
-	ldr		r2, [sp, #456]
-	ldr		r4, [sp, #460]
-	subs		r5, r2, #1
-	bge		.Lmainloop
-	add		r1, r3, #144
-	add		r2, r3, #336
-	vld1.8		{d0-d1}, [r1, : 128]!
-	vld1.8		{d2-d3}, [r1, : 128]!
-	vld1.8		{d4}, [r1, : 64]
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		{d2-d3}, [r2, : 128]!
-	vst1.8		d4, [r2, : 64]
-	movw		r1, #0
-.Linvertloop:
-	add		r2, r3, #144
-	movw		r4, #0
-	movw		r5, #2
-	cmp		r1, #1
-	moveq		r5, #1
-	addeq		r2, r3, #336
-	addeq		r4, r3, #48
-	cmp		r1, #2
-	moveq		r5, #1
-	addeq		r2, r3, #48
-	cmp		r1, #3
-	moveq		r5, #5
-	addeq		r4, r3, #336
-	cmp		r1, #4
-	moveq		r5, #10
-	cmp		r1, #5
-	moveq		r5, #20
-	cmp		r1, #6
-	moveq		r5, #10
-	addeq		r2, r3, #336
-	addeq		r4, r3, #336
-	cmp		r1, #7
-	moveq		r5, #50
-	cmp		r1, #8
-	moveq		r5, #100
-	cmp		r1, #9
-	moveq		r5, #50
-	addeq		r2, r3, #336
-	cmp		r1, #10
-	moveq		r5, #5
-	addeq		r2, r3, #48
-	cmp		r1, #11
-	moveq		r5, #0
-	addeq		r2, r3, #96
-	add		r6, r3, #144
-	add		r7, r3, #288
-	vld1.8		{d0-d1}, [r6, : 128]!
-	vld1.8		{d2-d3}, [r6, : 128]!
-	vld1.8		{d4}, [r6, : 64]
-	vst1.8		{d0-d1}, [r7, : 128]!
-	vst1.8		{d2-d3}, [r7, : 128]!
-	vst1.8		d4, [r7, : 64]
-	cmp		r5, #0
-	beq		.Lskipsquaringloop
-.Lsquaringloop:
-	add		r6, r3, #288
-	add		r7, r3, #288
-	add		r8, r3, #288
-	vmov.i32	q0, #19
-	vmov.i32	q1, #0
-	vmov.i32	q2, #1
-	vzip.i32	q1, q2
-	vld1.8		{d4-d5}, [r7, : 128]!
-	vld1.8		{d6-d7}, [r7, : 128]!
-	vld1.8		{d9}, [r7, : 64]
-	vld1.8		{d10-d11}, [r6, : 128]!
-	add		r7, sp, #384
-	vld1.8		{d12-d13}, [r6, : 128]!
-	vmul.i32	q7, q2, q0
-	vld1.8		{d8}, [r6, : 64]
-	vext.32		d17, d11, d10, #1
-	vmul.i32	q9, q3, q0
-	vext.32		d16, d10, d8, #1
-	vshl.u32	q10, q5, q1
-	vext.32		d22, d14, d4, #1
-	vext.32		d24, d18, d6, #1
-	vshl.u32	q13, q6, q1
-	vshl.u32	d28, d8, d2
-	vrev64.i32	d22, d22
-	vmul.i32	d1, d9, d1
-	vrev64.i32	d24, d24
-	vext.32		d29, d8, d13, #1
-	vext.32		d0, d1, d9, #1
-	vrev64.i32	d0, d0
-	vext.32		d2, d9, d1, #1
-	vext.32		d23, d15, d5, #1
-	vmull.s32	q4, d20, d4
-	vrev64.i32	d23, d23
-	vmlal.s32	q4, d21, d1
-	vrev64.i32	d2, d2
-	vmlal.s32	q4, d26, d19
-	vext.32		d3, d5, d15, #1
-	vmlal.s32	q4, d27, d18
-	vrev64.i32	d3, d3
-	vmlal.s32	q4, d28, d15
-	vext.32		d14, d12, d11, #1
-	vmull.s32	q5, d16, d23
-	vext.32		d15, d13, d12, #1
-	vmlal.s32	q5, d17, d4
-	vst1.8		d8, [r7, : 64]!
-	vmlal.s32	q5, d14, d1
-	vext.32		d12, d9, d8, #0
-	vmlal.s32	q5, d15, d19
-	vmov.i64	d13, #0
-	vmlal.s32	q5, d29, d18
-	vext.32		d25, d19, d7, #1
-	vmlal.s32	q6, d20, d5
-	vrev64.i32	d25, d25
-	vmlal.s32	q6, d21, d4
-	vst1.8		d11, [r7, : 64]!
-	vmlal.s32	q6, d26, d1
-	vext.32		d9, d10, d10, #0
-	vmlal.s32	q6, d27, d19
-	vmov.i64	d8, #0
-	vmlal.s32	q6, d28, d18
-	vmlal.s32	q4, d16, d24
-	vmlal.s32	q4, d17, d5
-	vmlal.s32	q4, d14, d4
-	vst1.8		d12, [r7, : 64]!
-	vmlal.s32	q4, d15, d1
-	vext.32		d10, d13, d12, #0
-	vmlal.s32	q4, d29, d19
-	vmov.i64	d11, #0
-	vmlal.s32	q5, d20, d6
-	vmlal.s32	q5, d21, d5
-	vmlal.s32	q5, d26, d4
-	vext.32		d13, d8, d8, #0
-	vmlal.s32	q5, d27, d1
-	vmov.i64	d12, #0
-	vmlal.s32	q5, d28, d19
-	vst1.8		d9, [r7, : 64]!
-	vmlal.s32	q6, d16, d25
-	vmlal.s32	q6, d17, d6
-	vst1.8		d10, [r7, : 64]
-	vmlal.s32	q6, d14, d5
-	vext.32		d8, d11, d10, #0
-	vmlal.s32	q6, d15, d4
-	vmov.i64	d9, #0
-	vmlal.s32	q6, d29, d1
-	vmlal.s32	q4, d20, d7
-	vmlal.s32	q4, d21, d6
-	vmlal.s32	q4, d26, d5
-	vext.32		d11, d12, d12, #0
-	vmlal.s32	q4, d27, d4
-	vmov.i64	d10, #0
-	vmlal.s32	q4, d28, d1
-	vmlal.s32	q5, d16, d0
-	sub		r6, r7, #32
-	vmlal.s32	q5, d17, d7
-	vmlal.s32	q5, d14, d6
-	vext.32		d30, d9, d8, #0
-	vmlal.s32	q5, d15, d5
-	vld1.8		{d31}, [r6, : 64]!
-	vmlal.s32	q5, d29, d4
-	vmlal.s32	q15, d20, d0
-	vext.32		d0, d6, d18, #1
-	vmlal.s32	q15, d21, d25
-	vrev64.i32	d0, d0
-	vmlal.s32	q15, d26, d24
-	vext.32		d1, d7, d19, #1
-	vext.32		d7, d10, d10, #0
-	vmlal.s32	q15, d27, d23
-	vrev64.i32	d1, d1
-	vld1.8		{d6}, [r6, : 64]
-	vmlal.s32	q15, d28, d22
-	vmlal.s32	q3, d16, d4
-	add		r6, r6, #24
-	vmlal.s32	q3, d17, d2
-	vext.32		d4, d31, d30, #0
-	vmov		d17, d11
-	vmlal.s32	q3, d14, d1
-	vext.32		d11, d13, d13, #0
-	vext.32		d13, d30, d30, #0
-	vmlal.s32	q3, d15, d0
-	vext.32		d1, d8, d8, #0
-	vmlal.s32	q3, d29, d3
-	vld1.8		{d5}, [r6, : 64]
-	sub		r6, r6, #16
-	vext.32		d10, d6, d6, #0
-	vmov.i32	q1, #0xffffffff
-	vshl.i64	q4, q1, #25
-	add		r7, sp, #480
-	vld1.8		{d14-d15}, [r7, : 128]
-	vadd.i64	q9, q2, q7
-	vshl.i64	q1, q1, #26
-	vshr.s64	q10, q9, #26
-	vld1.8		{d0}, [r6, : 64]!
-	vadd.i64	q5, q5, q10
-	vand		q9, q9, q1
-	vld1.8		{d16}, [r6, : 64]!
-	add		r6, sp, #496
-	vld1.8		{d20-d21}, [r6, : 128]
-	vadd.i64	q11, q5, q10
-	vsub.i64	q2, q2, q9
-	vshr.s64	q9, q11, #25
-	vext.32		d12, d5, d4, #0
-	vand		q11, q11, q4
-	vadd.i64	q0, q0, q9
-	vmov		d19, d7
-	vadd.i64	q3, q0, q7
-	vsub.i64	q5, q5, q11
-	vshr.s64	q11, q3, #26
-	vext.32		d18, d11, d10, #0
-	vand		q3, q3, q1
-	vadd.i64	q8, q8, q11
-	vadd.i64	q11, q8, q10
-	vsub.i64	q0, q0, q3
-	vshr.s64	q3, q11, #25
-	vand		q11, q11, q4
-	vadd.i64	q3, q6, q3
-	vadd.i64	q6, q3, q7
-	vsub.i64	q8, q8, q11
-	vshr.s64	q11, q6, #26
-	vand		q6, q6, q1
-	vadd.i64	q9, q9, q11
-	vadd.i64	d25, d19, d21
-	vsub.i64	q3, q3, q6
-	vshr.s64	d23, d25, #25
-	vand		q4, q12, q4
-	vadd.i64	d21, d23, d23
-	vshl.i64	d25, d23, #4
-	vadd.i64	d21, d21, d23
-	vadd.i64	d25, d25, d21
-	vadd.i64	d4, d4, d25
-	vzip.i32	q0, q8
-	vadd.i64	d12, d4, d14
-	add		r6, r8, #8
-	vst1.8		d0, [r6, : 64]
-	vsub.i64	d19, d19, d9
-	add		r6, r6, #16
-	vst1.8		d16, [r6, : 64]
-	vshr.s64	d22, d12, #26
-	vand		q0, q6, q1
-	vadd.i64	d10, d10, d22
-	vzip.i32	q3, q9
-	vsub.i64	d4, d4, d0
-	sub		r6, r6, #8
-	vst1.8		d6, [r6, : 64]
-	add		r6, r6, #16
-	vst1.8		d18, [r6, : 64]
-	vzip.i32	q2, q5
-	sub		r6, r6, #32
-	vst1.8		d4, [r6, : 64]
-	subs		r5, r5, #1
-	bhi		.Lsquaringloop
-.Lskipsquaringloop:
-	mov		r2, r2
-	add		r5, r3, #288
-	add		r6, r3, #144
-	vmov.i32	q0, #19
-	vmov.i32	q1, #0
-	vmov.i32	q2, #1
-	vzip.i32	q1, q2
-	vld1.8		{d4-d5}, [r5, : 128]!
-	vld1.8		{d6-d7}, [r5, : 128]!
-	vld1.8		{d9}, [r5, : 64]
-	vld1.8		{d10-d11}, [r2, : 128]!
-	add		r5, sp, #384
-	vld1.8		{d12-d13}, [r2, : 128]!
-	vmul.i32	q7, q2, q0
-	vld1.8		{d8}, [r2, : 64]
-	vext.32		d17, d11, d10, #1
-	vmul.i32	q9, q3, q0
-	vext.32		d16, d10, d8, #1
-	vshl.u32	q10, q5, q1
-	vext.32		d22, d14, d4, #1
-	vext.32		d24, d18, d6, #1
-	vshl.u32	q13, q6, q1
-	vshl.u32	d28, d8, d2
-	vrev64.i32	d22, d22
-	vmul.i32	d1, d9, d1
-	vrev64.i32	d24, d24
-	vext.32		d29, d8, d13, #1
-	vext.32		d0, d1, d9, #1
-	vrev64.i32	d0, d0
-	vext.32		d2, d9, d1, #1
-	vext.32		d23, d15, d5, #1
-	vmull.s32	q4, d20, d4
-	vrev64.i32	d23, d23
-	vmlal.s32	q4, d21, d1
-	vrev64.i32	d2, d2
-	vmlal.s32	q4, d26, d19
-	vext.32		d3, d5, d15, #1
-	vmlal.s32	q4, d27, d18
-	vrev64.i32	d3, d3
-	vmlal.s32	q4, d28, d15
-	vext.32		d14, d12, d11, #1
-	vmull.s32	q5, d16, d23
-	vext.32		d15, d13, d12, #1
-	vmlal.s32	q5, d17, d4
-	vst1.8		d8, [r5, : 64]!
-	vmlal.s32	q5, d14, d1
-	vext.32		d12, d9, d8, #0
-	vmlal.s32	q5, d15, d19
-	vmov.i64	d13, #0
-	vmlal.s32	q5, d29, d18
-	vext.32		d25, d19, d7, #1
-	vmlal.s32	q6, d20, d5
-	vrev64.i32	d25, d25
-	vmlal.s32	q6, d21, d4
-	vst1.8		d11, [r5, : 64]!
-	vmlal.s32	q6, d26, d1
-	vext.32		d9, d10, d10, #0
-	vmlal.s32	q6, d27, d19
-	vmov.i64	d8, #0
-	vmlal.s32	q6, d28, d18
-	vmlal.s32	q4, d16, d24
-	vmlal.s32	q4, d17, d5
-	vmlal.s32	q4, d14, d4
-	vst1.8		d12, [r5, : 64]!
-	vmlal.s32	q4, d15, d1
-	vext.32		d10, d13, d12, #0
-	vmlal.s32	q4, d29, d19
-	vmov.i64	d11, #0
-	vmlal.s32	q5, d20, d6
-	vmlal.s32	q5, d21, d5
-	vmlal.s32	q5, d26, d4
-	vext.32		d13, d8, d8, #0
-	vmlal.s32	q5, d27, d1
-	vmov.i64	d12, #0
-	vmlal.s32	q5, d28, d19
-	vst1.8		d9, [r5, : 64]!
-	vmlal.s32	q6, d16, d25
-	vmlal.s32	q6, d17, d6
-	vst1.8		d10, [r5, : 64]
-	vmlal.s32	q6, d14, d5
-	vext.32		d8, d11, d10, #0
-	vmlal.s32	q6, d15, d4
-	vmov.i64	d9, #0
-	vmlal.s32	q6, d29, d1
-	vmlal.s32	q4, d20, d7
-	vmlal.s32	q4, d21, d6
-	vmlal.s32	q4, d26, d5
-	vext.32		d11, d12, d12, #0
-	vmlal.s32	q4, d27, d4
-	vmov.i64	d10, #0
-	vmlal.s32	q4, d28, d1
-	vmlal.s32	q5, d16, d0
-	sub		r2, r5, #32
-	vmlal.s32	q5, d17, d7
-	vmlal.s32	q5, d14, d6
-	vext.32		d30, d9, d8, #0
-	vmlal.s32	q5, d15, d5
-	vld1.8		{d31}, [r2, : 64]!
-	vmlal.s32	q5, d29, d4
-	vmlal.s32	q15, d20, d0
-	vext.32		d0, d6, d18, #1
-	vmlal.s32	q15, d21, d25
-	vrev64.i32	d0, d0
-	vmlal.s32	q15, d26, d24
-	vext.32		d1, d7, d19, #1
-	vext.32		d7, d10, d10, #0
-	vmlal.s32	q15, d27, d23
-	vrev64.i32	d1, d1
-	vld1.8		{d6}, [r2, : 64]
-	vmlal.s32	q15, d28, d22
-	vmlal.s32	q3, d16, d4
-	add		r2, r2, #24
-	vmlal.s32	q3, d17, d2
-	vext.32		d4, d31, d30, #0
-	vmov		d17, d11
-	vmlal.s32	q3, d14, d1
-	vext.32		d11, d13, d13, #0
-	vext.32		d13, d30, d30, #0
-	vmlal.s32	q3, d15, d0
-	vext.32		d1, d8, d8, #0
-	vmlal.s32	q3, d29, d3
-	vld1.8		{d5}, [r2, : 64]
-	sub		r2, r2, #16
-	vext.32		d10, d6, d6, #0
-	vmov.i32	q1, #0xffffffff
-	vshl.i64	q4, q1, #25
-	add		r5, sp, #480
-	vld1.8		{d14-d15}, [r5, : 128]
-	vadd.i64	q9, q2, q7
-	vshl.i64	q1, q1, #26
-	vshr.s64	q10, q9, #26
-	vld1.8		{d0}, [r2, : 64]!
-	vadd.i64	q5, q5, q10
-	vand		q9, q9, q1
-	vld1.8		{d16}, [r2, : 64]!
-	add		r2, sp, #496
-	vld1.8		{d20-d21}, [r2, : 128]
-	vadd.i64	q11, q5, q10
-	vsub.i64	q2, q2, q9
-	vshr.s64	q9, q11, #25
-	vext.32		d12, d5, d4, #0
-	vand		q11, q11, q4
-	vadd.i64	q0, q0, q9
-	vmov		d19, d7
-	vadd.i64	q3, q0, q7
-	vsub.i64	q5, q5, q11
-	vshr.s64	q11, q3, #26
-	vext.32		d18, d11, d10, #0
-	vand		q3, q3, q1
-	vadd.i64	q8, q8, q11
-	vadd.i64	q11, q8, q10
-	vsub.i64	q0, q0, q3
-	vshr.s64	q3, q11, #25
-	vand		q11, q11, q4
-	vadd.i64	q3, q6, q3
-	vadd.i64	q6, q3, q7
-	vsub.i64	q8, q8, q11
-	vshr.s64	q11, q6, #26
-	vand		q6, q6, q1
-	vadd.i64	q9, q9, q11
-	vadd.i64	d25, d19, d21
-	vsub.i64	q3, q3, q6
-	vshr.s64	d23, d25, #25
-	vand		q4, q12, q4
-	vadd.i64	d21, d23, d23
-	vshl.i64	d25, d23, #4
-	vadd.i64	d21, d21, d23
-	vadd.i64	d25, d25, d21
-	vadd.i64	d4, d4, d25
-	vzip.i32	q0, q8
-	vadd.i64	d12, d4, d14
-	add		r2, r6, #8
-	vst1.8		d0, [r2, : 64]
-	vsub.i64	d19, d19, d9
-	add		r2, r2, #16
-	vst1.8		d16, [r2, : 64]
-	vshr.s64	d22, d12, #26
-	vand		q0, q6, q1
-	vadd.i64	d10, d10, d22
-	vzip.i32	q3, q9
-	vsub.i64	d4, d4, d0
-	sub		r2, r2, #8
-	vst1.8		d6, [r2, : 64]
-	add		r2, r2, #16
-	vst1.8		d18, [r2, : 64]
-	vzip.i32	q2, q5
-	sub		r2, r2, #32
-	vst1.8		d4, [r2, : 64]
-	cmp		r4, #0
-	beq		.Lskippostcopy
-	add		r2, r3, #144
-	mov		r4, r4
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4}, [r2, : 64]
-	vst1.8		{d0-d1}, [r4, : 128]!
-	vst1.8		{d2-d3}, [r4, : 128]!
-	vst1.8		d4, [r4, : 64]
-.Lskippostcopy:
-	cmp		r1, #1
-	bne		.Lskipfinalcopy
-	add		r2, r3, #288
-	add		r4, r3, #144
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4}, [r2, : 64]
-	vst1.8		{d0-d1}, [r4, : 128]!
-	vst1.8		{d2-d3}, [r4, : 128]!
-	vst1.8		d4, [r4, : 64]
-.Lskipfinalcopy:
-	add		r1, r1, #1
-	cmp		r1, #12
-	blo		.Linvertloop
-	add		r1, r3, #144
-	ldr		r2, [r1], #4
-	ldr		r3, [r1], #4
-	ldr		r4, [r1], #4
-	ldr		r5, [r1], #4
-	ldr		r6, [r1], #4
-	ldr		r7, [r1], #4
-	ldr		r8, [r1], #4
-	ldr		r9, [r1], #4
-	ldr		r10, [r1], #4
-	ldr		r1, [r1]
-	add		r11, r1, r1, LSL #4
-	add		r11, r11, r1, LSL #1
-	add		r11, r11, #16777216
-	mov		r11, r11, ASR #25
-	add		r11, r11, r2
-	mov		r11, r11, ASR #26
-	add		r11, r11, r3
-	mov		r11, r11, ASR #25
-	add		r11, r11, r4
-	mov		r11, r11, ASR #26
-	add		r11, r11, r5
-	mov		r11, r11, ASR #25
-	add		r11, r11, r6
-	mov		r11, r11, ASR #26
-	add		r11, r11, r7
-	mov		r11, r11, ASR #25
-	add		r11, r11, r8
-	mov		r11, r11, ASR #26
-	add		r11, r11, r9
-	mov		r11, r11, ASR #25
-	add		r11, r11, r10
-	mov		r11, r11, ASR #26
-	add		r11, r11, r1
-	mov		r11, r11, ASR #25
-	add		r2, r2, r11
-	add		r2, r2, r11, LSL #1
-	add		r2, r2, r11, LSL #4
-	mov		r11, r2, ASR #26
-	add		r3, r3, r11
-	sub		r2, r2, r11, LSL #26
-	mov		r11, r3, ASR #25
-	add		r4, r4, r11
-	sub		r3, r3, r11, LSL #25
-	mov		r11, r4, ASR #26
-	add		r5, r5, r11
-	sub		r4, r4, r11, LSL #26
-	mov		r11, r5, ASR #25
-	add		r6, r6, r11
-	sub		r5, r5, r11, LSL #25
-	mov		r11, r6, ASR #26
-	add		r7, r7, r11
-	sub		r6, r6, r11, LSL #26
-	mov		r11, r7, ASR #25
-	add		r8, r8, r11
-	sub		r7, r7, r11, LSL #25
-	mov		r11, r8, ASR #26
-	add		r9, r9, r11
-	sub		r8, r8, r11, LSL #26
-	mov		r11, r9, ASR #25
-	add		r10, r10, r11
-	sub		r9, r9, r11, LSL #25
-	mov		r11, r10, ASR #26
-	add		r1, r1, r11
-	sub		r10, r10, r11, LSL #26
-	mov		r11, r1, ASR #25
-	sub		r1, r1, r11, LSL #25
-	add		r2, r2, r3, LSL #26
-	mov		r3, r3, LSR #6
-	add		r3, r3, r4, LSL #19
-	mov		r4, r4, LSR #13
-	add		r4, r4, r5, LSL #13
-	mov		r5, r5, LSR #19
-	add		r5, r5, r6, LSL #6
-	add		r6, r7, r8, LSL #25
-	mov		r7, r8, LSR #7
-	add		r7, r7, r9, LSL #19
-	mov		r8, r9, LSR #13
-	add		r8, r8, r10, LSL #12
-	mov		r9, r10, LSR #20
-	add		r1, r9, r1, LSL #6
-	str		r2, [r0]
-	str		r3, [r0, #4]
-	str		r4, [r0, #8]
-	str		r5, [r0, #12]
-	str		r6, [r0, #16]
-	str		r7, [r0, #20]
-	str		r8, [r0, #24]
-	str		r1, [r0, #28]
-	movw		r0, #0
-	mov		sp, ip
-	pop		{r4-r11, pc}
-ENDPROC(curve25519_neon)
diff --git a/arch/arm/crypto/curve25519-glue.c b/arch/arm/crypto/curve25519-glue.c
deleted file mode 100644
index e7b87e09dd99..000000000000
--- a/arch/arm/crypto/curve25519-glue.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- *
- * Based on public domain code from Daniel J. Bernstein and Peter Schwabe. This
- * began from SUPERCOP's curve25519/neon2/scalarmult.s, but has subsequently been
- * manually reworked for use in kernel space.
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <crypto/internal/kpp.h>
-#include <crypto/internal/simd.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/jump_label.h>
-#include <linux/scatterlist.h>
-#include <crypto/curve25519.h>
-
-asmlinkage void curve25519_neon(u8 mypublic[CURVE25519_KEY_SIZE],
-				const u8 secret[CURVE25519_KEY_SIZE],
-				const u8 basepoint[CURVE25519_KEY_SIZE]);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-
-void curve25519_arch(u8 out[CURVE25519_KEY_SIZE],
-		     const u8 scalar[CURVE25519_KEY_SIZE],
-		     const u8 point[CURVE25519_KEY_SIZE])
-{
-	if (static_branch_likely(&have_neon) && crypto_simd_usable()) {
-		kernel_neon_begin();
-		curve25519_neon(out, scalar, point);
-		kernel_neon_end();
-	} else {
-		curve25519_generic(out, scalar, point);
-	}
-}
-EXPORT_SYMBOL(curve25519_arch);
-
-void curve25519_base_arch(u8 pub[CURVE25519_KEY_SIZE],
-			  const u8 secret[CURVE25519_KEY_SIZE])
-{
-	return curve25519_arch(pub, secret, curve25519_base_point);
-}
-EXPORT_SYMBOL(curve25519_base_arch);
-
-static int curve25519_set_secret(struct crypto_kpp *tfm, const void *buf,
-				 unsigned int len)
-{
-	u8 *secret = kpp_tfm_ctx(tfm);
-
-	if (!len)
-		curve25519_generate_secret(secret);
-	else if (len == CURVE25519_KEY_SIZE &&
-		 crypto_memneq(buf, curve25519_null_point, CURVE25519_KEY_SIZE))
-		memcpy(secret, buf, CURVE25519_KEY_SIZE);
-	else
-		return -EINVAL;
-	return 0;
-}
-
-static int curve25519_compute_value(struct kpp_request *req)
-{
-	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-	const u8 *secret = kpp_tfm_ctx(tfm);
-	u8 public_key[CURVE25519_KEY_SIZE];
-	u8 buf[CURVE25519_KEY_SIZE];
-	int copied, nbytes;
-	u8 const *bp;
-
-	if (req->src) {
-		copied = sg_copy_to_buffer(req->src,
-					   sg_nents_for_len(req->src,
-							    CURVE25519_KEY_SIZE),
-					   public_key, CURVE25519_KEY_SIZE);
-		if (copied != CURVE25519_KEY_SIZE)
-			return -EINVAL;
-		bp = public_key;
-	} else {
-		bp = curve25519_base_point;
-	}
-
-	curve25519_arch(buf, secret, bp);
-
-	/* might want less than we've got */
-	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-								nbytes),
-				     buf, nbytes);
-	if (copied != nbytes)
-		return -EINVAL;
-	return 0;
-}
-
-static unsigned int curve25519_max_size(struct crypto_kpp *tfm)
-{
-	return CURVE25519_KEY_SIZE;
-}
-
-static struct kpp_alg curve25519_alg = {
-	.base.cra_name		= "curve25519",
-	.base.cra_driver_name	= "curve25519-neon",
-	.base.cra_priority	= 200,
-	.base.cra_module	= THIS_MODULE,
-	.base.cra_ctxsize	= CURVE25519_KEY_SIZE,
-
-	.set_secret		= curve25519_set_secret,
-	.generate_public_key	= curve25519_compute_value,
-	.compute_shared_secret	= curve25519_compute_value,
-	.max_size		= curve25519_max_size,
-};
-
-static int __init arm_curve25519_init(void)
-{
-	if (elf_hwcap & HWCAP_NEON) {
-		static_branch_enable(&have_neon);
-		return IS_REACHABLE(CONFIG_CRYPTO_KPP) ?
-			crypto_register_kpp(&curve25519_alg) : 0;
-	}
-	return 0;
-}
-
-static void __exit arm_curve25519_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_KPP) && elf_hwcap & HWCAP_NEON)
-		crypto_unregister_kpp(&curve25519_alg);
-}
-
-module_init(arm_curve25519_init);
-module_exit(arm_curve25519_exit);
-
-MODULE_ALIAS_CRYPTO("curve25519");
-MODULE_ALIAS_CRYPTO("curve25519-neon");
-MODULE_DESCRIPTION("Public key crypto: Curve25519 (NEON-accelerated)");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c
index 3af997082534..a52dcc8c1e33 100644
--- a/arch/arm/crypto/ghash-ce-glue.c
+++ b/arch/arm/crypto/ghash-ce-glue.c
@@ -8,22 +8,22 @@
 
 #include <asm/hwcap.h>
 #include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/aes.h>
-#include <crypto/gcm.h>
 #include <crypto/b128ops.h>
-#include <crypto/cryptd.h>
+#include <crypto/gcm.h>
+#include <crypto/gf128mul.h>
+#include <crypto/ghash.h>
 #include <crypto/internal/aead.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
-#include <crypto/gf128mul.h>
 #include <crypto/scatterwalk.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/errno.h>
 #include <linux/jump_label.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
+#include <linux/unaligned.h>
 
 MODULE_DESCRIPTION("GHASH hash function using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ardb@kernel.org>");
@@ -32,9 +32,6 @@ MODULE_ALIAS_CRYPTO("ghash");
 MODULE_ALIAS_CRYPTO("gcm(aes)");
 MODULE_ALIAS_CRYPTO("rfc4106(gcm(aes))");
 
-#define GHASH_BLOCK_SIZE	16
-#define GHASH_DIGEST_SIZE	16
-
 #define RFC4106_NONCE_SIZE	4
 
 struct ghash_key {
@@ -49,14 +46,8 @@ struct gcm_key {
 	u8	nonce[];	// for RFC4106 nonce
 };
 
-struct ghash_desc_ctx {
+struct arm_ghash_desc_ctx {
 	u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)];
-	u8 buf[GHASH_BLOCK_SIZE];
-	u32 count;
-};
-
-struct ghash_async_ctx {
-	struct cryptd_ahash *cryptd_tfm;
 };
 
 asmlinkage void pmull_ghash_update_p64(int blocks, u64 dg[], const char *src,
@@ -69,94 +60,69 @@ static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_p64);
 
 static int ghash_init(struct shash_desc *desc)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	*ctx = (struct ghash_desc_ctx){};
+	*ctx = (struct arm_ghash_desc_ctx){};
 	return 0;
 }
 
 static void ghash_do_update(int blocks, u64 dg[], const char *src,
 			    struct ghash_key *key, const char *head)
 {
-	if (likely(crypto_simd_usable())) {
-		kernel_neon_begin();
-		if (static_branch_likely(&use_p64))
-			pmull_ghash_update_p64(blocks, dg, src, key->h, head);
-		else
-			pmull_ghash_update_p8(blocks, dg, src, key->h, head);
-		kernel_neon_end();
-	} else {
-		be128 dst = { cpu_to_be64(dg[1]), cpu_to_be64(dg[0]) };
-
-		do {
-			const u8 *in = src;
-
-			if (head) {
-				in = head;
-				blocks++;
-				head = NULL;
-			} else {
-				src += GHASH_BLOCK_SIZE;
-			}
-
-			crypto_xor((u8 *)&dst, in, GHASH_BLOCK_SIZE);
-			gf128mul_lle(&dst, &key->k);
-		} while (--blocks);
-
-		dg[0] = be64_to_cpu(dst.b);
-		dg[1] = be64_to_cpu(dst.a);
-	}
+	kernel_neon_begin();
+	if (static_branch_likely(&use_p64))
+		pmull_ghash_update_p64(blocks, dg, src, key->h, head);
+	else
+		pmull_ghash_update_p8(blocks, dg, src, key->h, head);
+	kernel_neon_end();
 }
 
 static int ghash_update(struct shash_desc *desc, const u8 *src,
 			unsigned int len)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
+	struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	int blocks;
 
-	ctx->count += len;
-
-	if ((partial + len) >= GHASH_BLOCK_SIZE) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
-		int blocks;
+	blocks = len / GHASH_BLOCK_SIZE;
+	ghash_do_update(blocks, ctx->digest, src, key, NULL);
+	return len - blocks * GHASH_BLOCK_SIZE;
+}
 
-		if (partial) {
-			int p = GHASH_BLOCK_SIZE - partial;
+static int ghash_export(struct shash_desc *desc, void *out)
+{
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	u8 *dst = out;
 
-			memcpy(ctx->buf + partial, src, p);
-			src += p;
-			len -= p;
-		}
+	put_unaligned_be64(ctx->digest[1], dst);
+	put_unaligned_be64(ctx->digest[0], dst + 8);
+	return 0;
+}
 
-		blocks = len / GHASH_BLOCK_SIZE;
-		len %= GHASH_BLOCK_SIZE;
+static int ghash_import(struct shash_desc *desc, const void *in)
+{
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	const u8 *src = in;
 
-		ghash_do_update(blocks, ctx->digest, src, key,
-				partial ? ctx->buf : NULL);
-		src += blocks * GHASH_BLOCK_SIZE;
-		partial = 0;
-	}
-	if (len)
-		memcpy(ctx->buf + partial, src, len);
+	ctx->digest[1] = get_unaligned_be64(src);
+	ctx->digest[0] = get_unaligned_be64(src + 8);
 	return 0;
 }
 
-static int ghash_final(struct shash_desc *desc, u8 *dst)
+static int ghash_finup(struct shash_desc *desc, const u8 *src,
+		       unsigned int len, u8 *dst)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
+	struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	if (partial) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	if (len) {
+		u8 buf[GHASH_BLOCK_SIZE] = {};
 
-		memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial);
-		ghash_do_update(1, ctx->digest, ctx->buf, key, NULL);
+		memcpy(buf, src, len);
+		ghash_do_update(1, ctx->digest, buf, key, NULL);
+		memzero_explicit(buf, sizeof(buf));
 	}
-	put_unaligned_be64(ctx->digest[1], dst);
-	put_unaligned_be64(ctx->digest[0], dst + 8);
-
-	*ctx = (struct ghash_desc_ctx){};
-	return 0;
+	return ghash_export(desc, dst);
 }
 
 static void ghash_reflect(u64 h[], const be128 *k)
@@ -201,167 +167,22 @@ static struct shash_alg ghash_alg = {
 	.digestsize		= GHASH_DIGEST_SIZE,
 	.init			= ghash_init,
 	.update			= ghash_update,
-	.final			= ghash_final,
+	.finup			= ghash_finup,
 	.setkey			= ghash_setkey,
-	.descsize		= sizeof(struct ghash_desc_ctx),
+	.export			= ghash_export,
+	.import			= ghash_import,
+	.descsize		= sizeof(struct arm_ghash_desc_ctx),
+	.statesize		= sizeof(struct ghash_desc_ctx),
 
 	.base.cra_name		= "ghash",
-	.base.cra_driver_name	= "ghash-ce-sync",
-	.base.cra_priority	= 300 - 1,
+	.base.cra_driver_name	= "ghash-ce",
+	.base.cra_priority	= 300,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 	.base.cra_blocksize	= GHASH_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct ghash_key) + sizeof(u64[2]),
 	.base.cra_module	= THIS_MODULE,
 };
 
-static int ghash_async_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
-	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-	struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm);
-
-	desc->tfm = child;
-	return crypto_shash_init(desc);
-}
-
-static int ghash_async_update(struct ahash_request *req)
-{
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
-
-	if (!crypto_simd_usable() ||
-	    (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) {
-		memcpy(cryptd_req, req, sizeof(*req));
-		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
-		return crypto_ahash_update(cryptd_req);
-	} else {
-		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-		return shash_ahash_update(req, desc);
-	}
-}
-
-static int ghash_async_final(struct ahash_request *req)
-{
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
-
-	if (!crypto_simd_usable() ||
-	    (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) {
-		memcpy(cryptd_req, req, sizeof(*req));
-		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
-		return crypto_ahash_final(cryptd_req);
-	} else {
-		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-		return crypto_shash_final(desc, req->result);
-	}
-}
-
-static int ghash_async_digest(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
-
-	if (!crypto_simd_usable() ||
-	    (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) {
-		memcpy(cryptd_req, req, sizeof(*req));
-		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
-		return crypto_ahash_digest(cryptd_req);
-	} else {
-		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-		struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm);
-
-		desc->tfm = child;
-		return shash_ahash_digest(req, desc);
-	}
-}
-
-static int ghash_async_import(struct ahash_request *req, const void *in)
-{
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-
-	desc->tfm = cryptd_ahash_child(ctx->cryptd_tfm);
-
-	return crypto_shash_import(desc, in);
-}
-
-static int ghash_async_export(struct ahash_request *req, void *out)
-{
-	struct ahash_request *cryptd_req = ahash_request_ctx(req);
-	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
-
-	return crypto_shash_export(desc, out);
-}
-
-static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key,
-			      unsigned int keylen)
-{
-	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct crypto_ahash *child = &ctx->cryptd_tfm->base;
-
-	crypto_ahash_clear_flags(child, CRYPTO_TFM_REQ_MASK);
-	crypto_ahash_set_flags(child, crypto_ahash_get_flags(tfm)
-			       & CRYPTO_TFM_REQ_MASK);
-	return crypto_ahash_setkey(child, key, keylen);
-}
-
-static int ghash_async_init_tfm(struct crypto_tfm *tfm)
-{
-	struct cryptd_ahash *cryptd_tfm;
-	struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm);
-
-	cryptd_tfm = cryptd_alloc_ahash("ghash-ce-sync", 0, 0);
-	if (IS_ERR(cryptd_tfm))
-		return PTR_ERR(cryptd_tfm);
-	ctx->cryptd_tfm = cryptd_tfm;
-	crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
-				 sizeof(struct ahash_request) +
-				 crypto_ahash_reqsize(&cryptd_tfm->base));
-
-	return 0;
-}
-
-static void ghash_async_exit_tfm(struct crypto_tfm *tfm)
-{
-	struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm);
-
-	cryptd_free_ahash(ctx->cryptd_tfm);
-}
-
-static struct ahash_alg ghash_async_alg = {
-	.init			= ghash_async_init,
-	.update			= ghash_async_update,
-	.final			= ghash_async_final,
-	.setkey			= ghash_async_setkey,
-	.digest			= ghash_async_digest,
-	.import			= ghash_async_import,
-	.export			= ghash_async_export,
-	.halg.digestsize	= GHASH_DIGEST_SIZE,
-	.halg.statesize		= sizeof(struct ghash_desc_ctx),
-	.halg.base		= {
-		.cra_name	= "ghash",
-		.cra_driver_name = "ghash-ce",
-		.cra_priority	= 300,
-		.cra_flags	= CRYPTO_ALG_ASYNC,
-		.cra_blocksize	= GHASH_BLOCK_SIZE,
-		.cra_ctxsize	= sizeof(struct ghash_async_ctx),
-		.cra_module	= THIS_MODULE,
-		.cra_init	= ghash_async_init_tfm,
-		.cra_exit	= ghash_async_exit_tfm,
-	},
-};
-
-
 void pmull_gcm_encrypt(int blocks, u64 dg[], const char *src,
 		       struct gcm_key const *k, char *dst,
 		       const char *iv, int rounds, u32 counter);
@@ -459,17 +280,11 @@ static void gcm_calculate_auth_mac(struct aead_request *req, u64 dg[], u32 len)
 	scatterwalk_start(&walk, req->src);
 
 	do {
-		u32 n = scatterwalk_clamp(&walk, len);
-		u8 *p;
-
-		if (!n) {
-			scatterwalk_start(&walk, sg_next(walk.sg));
-			n = scatterwalk_clamp(&walk, len);
-		}
+		unsigned int n;
 
-		p = scatterwalk_map(&walk);
-		gcm_update_mac(dg, p, n, buf, &buf_count, ctx);
-		scatterwalk_unmap(p);
+		n = scatterwalk_next(&walk, len);
+		gcm_update_mac(dg, walk.addr, n, buf, &buf_count, ctx);
+		scatterwalk_done_src(&walk,  n);
 
 		if (unlikely(len / SZ_4K > (len - n) / SZ_4K)) {
 			kernel_neon_end();
@@ -477,8 +292,6 @@ static void gcm_calculate_auth_mac(struct aead_request *req, u64 dg[], u32 len)
 		}
 
 		len -= n;
-		scatterwalk_advance(&walk, n);
-		scatterwalk_done(&walk, 0, len);
 	} while (len);
 
 	if (buf_count) {
@@ -500,9 +313,6 @@ static int gcm_encrypt(struct aead_request *req, const u8 *iv, u32 assoclen)
 	u8 *tag, *dst;
 	int tail, err;
 
-	if (WARN_ON_ONCE(!may_use_simd()))
-		return -EBUSY;
-
 	err = skcipher_walk_aead_encrypt(&walk, req, false);
 
 	kernel_neon_begin();
@@ -592,9 +402,6 @@ static int gcm_decrypt(struct aead_request *req, const u8 *iv, u32 assoclen)
 	u8 *tag, *dst;
 	int tail, err, ret;
 
-	if (WARN_ON_ONCE(!may_use_simd()))
-		return -EBUSY;
-
 	scatterwalk_map_and_copy(otag, req->src,
 				 req->assoclen + req->cryptlen - authsize,
 				 authsize, 0);
@@ -767,14 +574,9 @@ static int __init ghash_ce_mod_init(void)
 	err = crypto_register_shash(&ghash_alg);
 	if (err)
 		goto err_aead;
-	err = crypto_register_ahash(&ghash_async_alg);
-	if (err)
-		goto err_shash;
 
 	return 0;
 
-err_shash:
-	crypto_unregister_shash(&ghash_alg);
 err_aead:
 	if (elf_hwcap2 & HWCAP2_PMULL)
 		crypto_unregister_aeads(gcm_aes_algs,
@@ -784,7 +586,6 @@ err_aead:
 
 static void __exit ghash_ce_mod_exit(void)
 {
-	crypto_unregister_ahash(&ghash_async_alg);
 	crypto_unregister_shash(&ghash_alg);
 	if (elf_hwcap2 & HWCAP2_PMULL)
 		crypto_unregister_aeads(gcm_aes_algs,
diff --git a/arch/arm/crypto/poly1305-armv4.pl b/arch/arm/crypto/poly1305-armv4.pl
deleted file mode 100644
index 6d79498d3115..000000000000
--- a/arch/arm/crypto/poly1305-armv4.pl
+++ /dev/null
@@ -1,1236 +0,0 @@
-#!/usr/bin/env perl
-# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause
-#
-# ====================================================================
-# Written by Andy Polyakov, @dot-asm, initially for the OpenSSL
-# project.
-# ====================================================================
-#
-#			IALU(*)/gcc-4.4		NEON
-#
-# ARM11xx(ARMv6)	7.78/+100%		-
-# Cortex-A5		6.35/+130%		3.00
-# Cortex-A8		6.25/+115%		2.36
-# Cortex-A9		5.10/+95%		2.55
-# Cortex-A15		3.85/+85%		1.25(**)
-# Snapdragon S4		5.70/+100%		1.48(**)
-#
-# (*)	this is for -march=armv6, i.e. with bunch of ldrb loading data;
-# (**)	these are trade-off results, they can be improved by ~8% but at
-#	the cost of 15/12% regression on Cortex-A5/A7, it's even possible
-#	to improve Cortex-A9 result, but then A5/A7 loose more than 20%;
-
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
-
-if ($flavour && $flavour ne "void") {
-    $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-    ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
-    ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
-    die "can't locate arm-xlate.pl";
-
-    open STDOUT,"| \"$^X\" $xlate $flavour $output";
-} else {
-    open STDOUT,">$output";
-}
-
-($ctx,$inp,$len,$padbit)=map("r$_",(0..3));
-
-$code.=<<___;
-#ifndef	__KERNEL__
-# include "arm_arch.h"
-#else
-# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-# define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__
-# define poly1305_init   poly1305_init_arm
-# define poly1305_blocks poly1305_blocks_arm
-# define poly1305_emit   poly1305_emit_arm
-.globl	poly1305_blocks_neon
-#endif
-
-#if defined(__thumb2__)
-.syntax	unified
-.thumb
-#else
-.code	32
-#endif
-
-.text
-
-.globl	poly1305_emit
-.globl	poly1305_blocks
-.globl	poly1305_init
-.type	poly1305_init,%function
-.align	5
-poly1305_init:
-.Lpoly1305_init:
-	stmdb	sp!,{r4-r11}
-
-	eor	r3,r3,r3
-	cmp	$inp,#0
-	str	r3,[$ctx,#0]		@ zero hash value
-	str	r3,[$ctx,#4]
-	str	r3,[$ctx,#8]
-	str	r3,[$ctx,#12]
-	str	r3,[$ctx,#16]
-	str	r3,[$ctx,#36]		@ clear is_base2_26
-	add	$ctx,$ctx,#20
-
-#ifdef	__thumb2__
-	it	eq
-#endif
-	moveq	r0,#0
-	beq	.Lno_key
-
-#if	__ARM_MAX_ARCH__>=7
-	mov	r3,#-1
-	str	r3,[$ctx,#28]		@ impossible key power value
-# ifndef __KERNEL__
-	adr	r11,.Lpoly1305_init
-	ldr	r12,.LOPENSSL_armcap
-# endif
-#endif
-	ldrb	r4,[$inp,#0]
-	mov	r10,#0x0fffffff
-	ldrb	r5,[$inp,#1]
-	and	r3,r10,#-4		@ 0x0ffffffc
-	ldrb	r6,[$inp,#2]
-	ldrb	r7,[$inp,#3]
-	orr	r4,r4,r5,lsl#8
-	ldrb	r5,[$inp,#4]
-	orr	r4,r4,r6,lsl#16
-	ldrb	r6,[$inp,#5]
-	orr	r4,r4,r7,lsl#24
-	ldrb	r7,[$inp,#6]
-	and	r4,r4,r10
-
-#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-# if !defined(_WIN32)
-	ldr	r12,[r11,r12]		@ OPENSSL_armcap_P
-# endif
-# if defined(__APPLE__) || defined(_WIN32)
-	ldr	r12,[r12]
-# endif
-#endif
-	ldrb	r8,[$inp,#7]
-	orr	r5,r5,r6,lsl#8
-	ldrb	r6,[$inp,#8]
-	orr	r5,r5,r7,lsl#16
-	ldrb	r7,[$inp,#9]
-	orr	r5,r5,r8,lsl#24
-	ldrb	r8,[$inp,#10]
-	and	r5,r5,r3
-
-#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	tst	r12,#ARMV7_NEON		@ check for NEON
-# ifdef	__thumb2__
-	adr	r9,.Lpoly1305_blocks_neon
-	adr	r11,.Lpoly1305_blocks
-	it	ne
-	movne	r11,r9
-	adr	r12,.Lpoly1305_emit
-	orr	r11,r11,#1		@ thumb-ify addresses
-	orr	r12,r12,#1
-# else
-	add	r12,r11,#(.Lpoly1305_emit-.Lpoly1305_init)
-	ite	eq
-	addeq	r11,r11,#(.Lpoly1305_blocks-.Lpoly1305_init)
-	addne	r11,r11,#(.Lpoly1305_blocks_neon-.Lpoly1305_init)
-# endif
-#endif
-	ldrb	r9,[$inp,#11]
-	orr	r6,r6,r7,lsl#8
-	ldrb	r7,[$inp,#12]
-	orr	r6,r6,r8,lsl#16
-	ldrb	r8,[$inp,#13]
-	orr	r6,r6,r9,lsl#24
-	ldrb	r9,[$inp,#14]
-	and	r6,r6,r3
-
-	ldrb	r10,[$inp,#15]
-	orr	r7,r7,r8,lsl#8
-	str	r4,[$ctx,#0]
-	orr	r7,r7,r9,lsl#16
-	str	r5,[$ctx,#4]
-	orr	r7,r7,r10,lsl#24
-	str	r6,[$ctx,#8]
-	and	r7,r7,r3
-	str	r7,[$ctx,#12]
-#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	stmia	r2,{r11,r12}		@ fill functions table
-	mov	r0,#1
-#else
-	mov	r0,#0
-#endif
-.Lno_key:
-	ldmia	sp!,{r4-r11}
-#if	__ARM_ARCH__>=5
-	ret				@ bx	lr
-#else
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	poly1305_init,.-poly1305_init
-___
-{
-my ($h0,$h1,$h2,$h3,$h4,$r0,$r1,$r2,$r3)=map("r$_",(4..12));
-my ($s1,$s2,$s3)=($r1,$r2,$r3);
-
-$code.=<<___;
-.type	poly1305_blocks,%function
-.align	5
-poly1305_blocks:
-.Lpoly1305_blocks:
-	stmdb	sp!,{r3-r11,lr}
-
-	ands	$len,$len,#-16
-	beq	.Lno_data
-
-	add	$len,$len,$inp		@ end pointer
-	sub	sp,sp,#32
-
-#if __ARM_ARCH__<7
-	ldmia	$ctx,{$h0-$r3}		@ load context
-	add	$ctx,$ctx,#20
-	str	$len,[sp,#16]		@ offload stuff
-	str	$ctx,[sp,#12]
-#else
-	ldr	lr,[$ctx,#36]		@ is_base2_26
-	ldmia	$ctx!,{$h0-$h4}		@ load hash value
-	str	$len,[sp,#16]		@ offload stuff
-	str	$ctx,[sp,#12]
-
-	adds	$r0,$h0,$h1,lsl#26	@ base 2^26 -> base 2^32
-	mov	$r1,$h1,lsr#6
-	adcs	$r1,$r1,$h2,lsl#20
-	mov	$r2,$h2,lsr#12
-	adcs	$r2,$r2,$h3,lsl#14
-	mov	$r3,$h3,lsr#18
-	adcs	$r3,$r3,$h4,lsl#8
-	mov	$len,#0
-	teq	lr,#0
-	str	$len,[$ctx,#16]		@ clear is_base2_26
-	adc	$len,$len,$h4,lsr#24
-
-	itttt	ne
-	movne	$h0,$r0			@ choose between radixes
-	movne	$h1,$r1
-	movne	$h2,$r2
-	movne	$h3,$r3
-	ldmia	$ctx,{$r0-$r3}		@ load key
-	it	ne
-	movne	$h4,$len
-#endif
-
-	mov	lr,$inp
-	cmp	$padbit,#0
-	str	$r1,[sp,#20]
-	str	$r2,[sp,#24]
-	str	$r3,[sp,#28]
-	b	.Loop
-
-.align	4
-.Loop:
-#if __ARM_ARCH__<7
-	ldrb	r0,[lr],#16		@ load input
-# ifdef	__thumb2__
-	it	hi
-# endif
-	addhi	$h4,$h4,#1		@ 1<<128
-	ldrb	r1,[lr,#-15]
-	ldrb	r2,[lr,#-14]
-	ldrb	r3,[lr,#-13]
-	orr	r1,r0,r1,lsl#8
-	ldrb	r0,[lr,#-12]
-	orr	r2,r1,r2,lsl#16
-	ldrb	r1,[lr,#-11]
-	orr	r3,r2,r3,lsl#24
-	ldrb	r2,[lr,#-10]
-	adds	$h0,$h0,r3		@ accumulate input
-
-	ldrb	r3,[lr,#-9]
-	orr	r1,r0,r1,lsl#8
-	ldrb	r0,[lr,#-8]
-	orr	r2,r1,r2,lsl#16
-	ldrb	r1,[lr,#-7]
-	orr	r3,r2,r3,lsl#24
-	ldrb	r2,[lr,#-6]
-	adcs	$h1,$h1,r3
-
-	ldrb	r3,[lr,#-5]
-	orr	r1,r0,r1,lsl#8
-	ldrb	r0,[lr,#-4]
-	orr	r2,r1,r2,lsl#16
-	ldrb	r1,[lr,#-3]
-	orr	r3,r2,r3,lsl#24
-	ldrb	r2,[lr,#-2]
-	adcs	$h2,$h2,r3
-
-	ldrb	r3,[lr,#-1]
-	orr	r1,r0,r1,lsl#8
-	str	lr,[sp,#8]		@ offload input pointer
-	orr	r2,r1,r2,lsl#16
-	add	$s1,$r1,$r1,lsr#2
-	orr	r3,r2,r3,lsl#24
-#else
-	ldr	r0,[lr],#16		@ load input
-	it	hi
-	addhi	$h4,$h4,#1		@ padbit
-	ldr	r1,[lr,#-12]
-	ldr	r2,[lr,#-8]
-	ldr	r3,[lr,#-4]
-# ifdef	__ARMEB__
-	rev	r0,r0
-	rev	r1,r1
-	rev	r2,r2
-	rev	r3,r3
-# endif
-	adds	$h0,$h0,r0		@ accumulate input
-	str	lr,[sp,#8]		@ offload input pointer
-	adcs	$h1,$h1,r1
-	add	$s1,$r1,$r1,lsr#2
-	adcs	$h2,$h2,r2
-#endif
-	add	$s2,$r2,$r2,lsr#2
-	adcs	$h3,$h3,r3
-	add	$s3,$r3,$r3,lsr#2
-
-	umull	r2,r3,$h1,$r0
-	 adc	$h4,$h4,#0
-	umull	r0,r1,$h0,$r0
-	umlal	r2,r3,$h4,$s1
-	umlal	r0,r1,$h3,$s1
-	ldr	$r1,[sp,#20]		@ reload $r1
-	umlal	r2,r3,$h2,$s3
-	umlal	r0,r1,$h1,$s3
-	umlal	r2,r3,$h3,$s2
-	umlal	r0,r1,$h2,$s2
-	umlal	r2,r3,$h0,$r1
-	str	r0,[sp,#0]		@ future $h0
-	 mul	r0,$s2,$h4
-	ldr	$r2,[sp,#24]		@ reload $r2
-	adds	r2,r2,r1		@ d1+=d0>>32
-	 eor	r1,r1,r1
-	adc	lr,r3,#0		@ future $h2
-	str	r2,[sp,#4]		@ future $h1
-
-	mul	r2,$s3,$h4
-	eor	r3,r3,r3
-	umlal	r0,r1,$h3,$s3
-	ldr	$r3,[sp,#28]		@ reload $r3
-	umlal	r2,r3,$h3,$r0
-	umlal	r0,r1,$h2,$r0
-	umlal	r2,r3,$h2,$r1
-	umlal	r0,r1,$h1,$r1
-	umlal	r2,r3,$h1,$r2
-	umlal	r0,r1,$h0,$r2
-	umlal	r2,r3,$h0,$r3
-	ldr	$h0,[sp,#0]
-	mul	$h4,$r0,$h4
-	ldr	$h1,[sp,#4]
-
-	adds	$h2,lr,r0		@ d2+=d1>>32
-	ldr	lr,[sp,#8]		@ reload input pointer
-	adc	r1,r1,#0
-	adds	$h3,r2,r1		@ d3+=d2>>32
-	ldr	r0,[sp,#16]		@ reload end pointer
-	adc	r3,r3,#0
-	add	$h4,$h4,r3		@ h4+=d3>>32
-
-	and	r1,$h4,#-4
-	and	$h4,$h4,#3
-	add	r1,r1,r1,lsr#2		@ *=5
-	adds	$h0,$h0,r1
-	adcs	$h1,$h1,#0
-	adcs	$h2,$h2,#0
-	adcs	$h3,$h3,#0
-	adc	$h4,$h4,#0
-
-	cmp	r0,lr			@ done yet?
-	bhi	.Loop
-
-	ldr	$ctx,[sp,#12]
-	add	sp,sp,#32
-	stmdb	$ctx,{$h0-$h4}		@ store the result
-
-.Lno_data:
-#if	__ARM_ARCH__>=5
-	ldmia	sp!,{r3-r11,pc}
-#else
-	ldmia	sp!,{r3-r11,lr}
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	poly1305_blocks,.-poly1305_blocks
-___
-}
-{
-my ($ctx,$mac,$nonce)=map("r$_",(0..2));
-my ($h0,$h1,$h2,$h3,$h4,$g0,$g1,$g2,$g3)=map("r$_",(3..11));
-my $g4=$ctx;
-
-$code.=<<___;
-.type	poly1305_emit,%function
-.align	5
-poly1305_emit:
-.Lpoly1305_emit:
-	stmdb	sp!,{r4-r11}
-
-	ldmia	$ctx,{$h0-$h4}
-
-#if __ARM_ARCH__>=7
-	ldr	ip,[$ctx,#36]		@ is_base2_26
-
-	adds	$g0,$h0,$h1,lsl#26	@ base 2^26 -> base 2^32
-	mov	$g1,$h1,lsr#6
-	adcs	$g1,$g1,$h2,lsl#20
-	mov	$g2,$h2,lsr#12
-	adcs	$g2,$g2,$h3,lsl#14
-	mov	$g3,$h3,lsr#18
-	adcs	$g3,$g3,$h4,lsl#8
-	mov	$g4,#0
-	adc	$g4,$g4,$h4,lsr#24
-
-	tst	ip,ip
-	itttt	ne
-	movne	$h0,$g0
-	movne	$h1,$g1
-	movne	$h2,$g2
-	movne	$h3,$g3
-	it	ne
-	movne	$h4,$g4
-#endif
-
-	adds	$g0,$h0,#5		@ compare to modulus
-	adcs	$g1,$h1,#0
-	adcs	$g2,$h2,#0
-	adcs	$g3,$h3,#0
-	adc	$g4,$h4,#0
-	tst	$g4,#4			@ did it carry/borrow?
-
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	$h0,$g0
-	ldr	$g0,[$nonce,#0]
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	$h1,$g1
-	ldr	$g1,[$nonce,#4]
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	$h2,$g2
-	ldr	$g2,[$nonce,#8]
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	$h3,$g3
-	ldr	$g3,[$nonce,#12]
-
-	adds	$h0,$h0,$g0
-	adcs	$h1,$h1,$g1
-	adcs	$h2,$h2,$g2
-	adc	$h3,$h3,$g3
-
-#if __ARM_ARCH__>=7
-# ifdef __ARMEB__
-	rev	$h0,$h0
-	rev	$h1,$h1
-	rev	$h2,$h2
-	rev	$h3,$h3
-# endif
-	str	$h0,[$mac,#0]
-	str	$h1,[$mac,#4]
-	str	$h2,[$mac,#8]
-	str	$h3,[$mac,#12]
-#else
-	strb	$h0,[$mac,#0]
-	mov	$h0,$h0,lsr#8
-	strb	$h1,[$mac,#4]
-	mov	$h1,$h1,lsr#8
-	strb	$h2,[$mac,#8]
-	mov	$h2,$h2,lsr#8
-	strb	$h3,[$mac,#12]
-	mov	$h3,$h3,lsr#8
-
-	strb	$h0,[$mac,#1]
-	mov	$h0,$h0,lsr#8
-	strb	$h1,[$mac,#5]
-	mov	$h1,$h1,lsr#8
-	strb	$h2,[$mac,#9]
-	mov	$h2,$h2,lsr#8
-	strb	$h3,[$mac,#13]
-	mov	$h3,$h3,lsr#8
-
-	strb	$h0,[$mac,#2]
-	mov	$h0,$h0,lsr#8
-	strb	$h1,[$mac,#6]
-	mov	$h1,$h1,lsr#8
-	strb	$h2,[$mac,#10]
-	mov	$h2,$h2,lsr#8
-	strb	$h3,[$mac,#14]
-	mov	$h3,$h3,lsr#8
-
-	strb	$h0,[$mac,#3]
-	strb	$h1,[$mac,#7]
-	strb	$h2,[$mac,#11]
-	strb	$h3,[$mac,#15]
-#endif
-	ldmia	sp!,{r4-r11}
-#if	__ARM_ARCH__>=5
-	ret				@ bx	lr
-#else
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	poly1305_emit,.-poly1305_emit
-___
-{
-my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("d$_",(0..9));
-my ($D0,$D1,$D2,$D3,$D4, $H0,$H1,$H2,$H3,$H4) = map("q$_",(5..14));
-my ($T0,$T1,$MASK) = map("q$_",(15,4,0));
-
-my ($in2,$zeros,$tbl0,$tbl1) = map("r$_",(4..7));
-
-$code.=<<___;
-#if	__ARM_MAX_ARCH__>=7
-.fpu	neon
-
-.type	poly1305_init_neon,%function
-.align	5
-poly1305_init_neon:
-.Lpoly1305_init_neon:
-	ldr	r3,[$ctx,#48]		@ first table element
-	cmp	r3,#-1			@ is value impossible?
-	bne	.Lno_init_neon
-
-	ldr	r4,[$ctx,#20]		@ load key base 2^32
-	ldr	r5,[$ctx,#24]
-	ldr	r6,[$ctx,#28]
-	ldr	r7,[$ctx,#32]
-
-	and	r2,r4,#0x03ffffff	@ base 2^32 -> base 2^26
-	mov	r3,r4,lsr#26
-	mov	r4,r5,lsr#20
-	orr	r3,r3,r5,lsl#6
-	mov	r5,r6,lsr#14
-	orr	r4,r4,r6,lsl#12
-	mov	r6,r7,lsr#8
-	orr	r5,r5,r7,lsl#18
-	and	r3,r3,#0x03ffffff
-	and	r4,r4,#0x03ffffff
-	and	r5,r5,#0x03ffffff
-
-	vdup.32	$R0,r2			@ r^1 in both lanes
-	add	r2,r3,r3,lsl#2		@ *5
-	vdup.32	$R1,r3
-	add	r3,r4,r4,lsl#2
-	vdup.32	$S1,r2
-	vdup.32	$R2,r4
-	add	r4,r5,r5,lsl#2
-	vdup.32	$S2,r3
-	vdup.32	$R3,r5
-	add	r5,r6,r6,lsl#2
-	vdup.32	$S3,r4
-	vdup.32	$R4,r6
-	vdup.32	$S4,r5
-
-	mov	$zeros,#2		@ counter
-
-.Lsquare_neon:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-	@ d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-	@ d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-	@ d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-	@ d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-
-	vmull.u32	$D0,$R0,${R0}[1]
-	vmull.u32	$D1,$R1,${R0}[1]
-	vmull.u32	$D2,$R2,${R0}[1]
-	vmull.u32	$D3,$R3,${R0}[1]
-	vmull.u32	$D4,$R4,${R0}[1]
-
-	vmlal.u32	$D0,$R4,${S1}[1]
-	vmlal.u32	$D1,$R0,${R1}[1]
-	vmlal.u32	$D2,$R1,${R1}[1]
-	vmlal.u32	$D3,$R2,${R1}[1]
-	vmlal.u32	$D4,$R3,${R1}[1]
-
-	vmlal.u32	$D0,$R3,${S2}[1]
-	vmlal.u32	$D1,$R4,${S2}[1]
-	vmlal.u32	$D3,$R1,${R2}[1]
-	vmlal.u32	$D2,$R0,${R2}[1]
-	vmlal.u32	$D4,$R2,${R2}[1]
-
-	vmlal.u32	$D0,$R2,${S3}[1]
-	vmlal.u32	$D3,$R0,${R3}[1]
-	vmlal.u32	$D1,$R3,${S3}[1]
-	vmlal.u32	$D2,$R4,${S3}[1]
-	vmlal.u32	$D4,$R1,${R3}[1]
-
-	vmlal.u32	$D3,$R4,${S4}[1]
-	vmlal.u32	$D0,$R1,${S4}[1]
-	vmlal.u32	$D1,$R2,${S4}[1]
-	vmlal.u32	$D2,$R3,${S4}[1]
-	vmlal.u32	$D4,$R0,${R4}[1]
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
-	@ and P. Schwabe
-	@
-	@ H0>>+H1>>+H2>>+H3>>+H4
-	@ H3>>+H4>>*5+H0>>+H1
-	@
-	@ Trivia.
-	@
-	@ Result of multiplication of n-bit number by m-bit number is
-	@ n+m bits wide. However! Even though 2^n is a n+1-bit number,
-	@ m-bit number multiplied by 2^n is still n+m bits wide.
-	@
-	@ Sum of two n-bit numbers is n+1 bits wide, sum of three - n+2,
-	@ and so is sum of four. Sum of 2^m n-m-bit numbers and n-bit
-	@ one is n+1 bits wide.
-	@
-	@ >>+ denotes Hnext += Hn>>26, Hn &= 0x3ffffff. This means that
-	@ H0, H2, H3 are guaranteed to be 26 bits wide, while H1 and H4
-	@ can be 27. However! In cases when their width exceeds 26 bits
-	@ they are limited by 2^26+2^6. This in turn means that *sum*
-	@ of the products with these values can still be viewed as sum
-	@ of 52-bit numbers as long as the amount of addends is not a
-	@ power of 2. For example,
-	@
-	@ H4 = H4*R0 + H3*R1 + H2*R2 + H1*R3 + H0 * R4,
-	@
-	@ which can't be larger than 5 * (2^26 + 2^6) * (2^26 + 2^6), or
-	@ 5 * (2^52 + 2*2^32 + 2^12), which in turn is smaller than
-	@ 8 * (2^52) or 2^55. However, the value is then multiplied by
-	@ by 5, so we should be looking at 5 * 5 * (2^52 + 2^33 + 2^12),
-	@ which is less than 32 * (2^52) or 2^57. And when processing
-	@ data we are looking at triple as many addends...
-	@
-	@ In key setup procedure pre-reduced H0 is limited by 5*4+1 and
-	@ 5*H4 - by 5*5 52-bit addends, or 57 bits. But when hashing the
-	@ input H0 is limited by (5*4+1)*3 addends, or 58 bits, while
-	@ 5*H4 by 5*5*3, or 59[!] bits. How is this relevant? vmlal.u32
-	@ instruction accepts 2x32-bit input and writes 2x64-bit result.
-	@ This means that result of reduction have to be compressed upon
-	@ loop wrap-around. This can be done in the process of reduction
-	@ to minimize amount of instructions [as well as amount of
-	@ 128-bit instructions, which benefits low-end processors], but
-	@ one has to watch for H2 (which is narrower than H0) and 5*H4
-	@ not being wider than 58 bits, so that result of right shift
-	@ by 26 bits fits in 32 bits. This is also useful on x86,
-	@ because it allows to use paddd in place for paddq, which
-	@ benefits Atom, where paddq is ridiculously slow.
-
-	vshr.u64	$T0,$D3,#26
-	vmovn.i64	$D3#lo,$D3
-	 vshr.u64	$T1,$D0,#26
-	 vmovn.i64	$D0#lo,$D0
-	vadd.i64	$D4,$D4,$T0		@ h3 -> h4
-	vbic.i32	$D3#lo,#0xfc000000	@ &=0x03ffffff
-	 vadd.i64	$D1,$D1,$T1		@ h0 -> h1
-	 vbic.i32	$D0#lo,#0xfc000000
-
-	vshrn.u64	$T0#lo,$D4,#26
-	vmovn.i64	$D4#lo,$D4
-	 vshr.u64	$T1,$D1,#26
-	 vmovn.i64	$D1#lo,$D1
-	 vadd.i64	$D2,$D2,$T1		@ h1 -> h2
-	vbic.i32	$D4#lo,#0xfc000000
-	 vbic.i32	$D1#lo,#0xfc000000
-
-	vadd.i32	$D0#lo,$D0#lo,$T0#lo
-	vshl.u32	$T0#lo,$T0#lo,#2
-	 vshrn.u64	$T1#lo,$D2,#26
-	 vmovn.i64	$D2#lo,$D2
-	vadd.i32	$D0#lo,$D0#lo,$T0#lo	@ h4 -> h0
-	 vadd.i32	$D3#lo,$D3#lo,$T1#lo	@ h2 -> h3
-	 vbic.i32	$D2#lo,#0xfc000000
-
-	vshr.u32	$T0#lo,$D0#lo,#26
-	vbic.i32	$D0#lo,#0xfc000000
-	 vshr.u32	$T1#lo,$D3#lo,#26
-	 vbic.i32	$D3#lo,#0xfc000000
-	vadd.i32	$D1#lo,$D1#lo,$T0#lo	@ h0 -> h1
-	 vadd.i32	$D4#lo,$D4#lo,$T1#lo	@ h3 -> h4
-
-	subs		$zeros,$zeros,#1
-	beq		.Lsquare_break_neon
-
-	add		$tbl0,$ctx,#(48+0*9*4)
-	add		$tbl1,$ctx,#(48+1*9*4)
-
-	vtrn.32		$R0,$D0#lo		@ r^2:r^1
-	vtrn.32		$R2,$D2#lo
-	vtrn.32		$R3,$D3#lo
-	vtrn.32		$R1,$D1#lo
-	vtrn.32		$R4,$D4#lo
-
-	vshl.u32	$S2,$R2,#2		@ *5
-	vshl.u32	$S3,$R3,#2
-	vshl.u32	$S1,$R1,#2
-	vshl.u32	$S4,$R4,#2
-	vadd.i32	$S2,$S2,$R2
-	vadd.i32	$S1,$S1,$R1
-	vadd.i32	$S3,$S3,$R3
-	vadd.i32	$S4,$S4,$R4
-
-	vst4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!
-	vst4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!
-	vst4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-	vst4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-	vst1.32		{${S4}[0]},[$tbl0,:32]
-	vst1.32		{${S4}[1]},[$tbl1,:32]
-
-	b		.Lsquare_neon
-
-.align	4
-.Lsquare_break_neon:
-	add		$tbl0,$ctx,#(48+2*4*9)
-	add		$tbl1,$ctx,#(48+3*4*9)
-
-	vmov		$R0,$D0#lo		@ r^4:r^3
-	vshl.u32	$S1,$D1#lo,#2		@ *5
-	vmov		$R1,$D1#lo
-	vshl.u32	$S2,$D2#lo,#2
-	vmov		$R2,$D2#lo
-	vshl.u32	$S3,$D3#lo,#2
-	vmov		$R3,$D3#lo
-	vshl.u32	$S4,$D4#lo,#2
-	vmov		$R4,$D4#lo
-	vadd.i32	$S1,$S1,$D1#lo
-	vadd.i32	$S2,$S2,$D2#lo
-	vadd.i32	$S3,$S3,$D3#lo
-	vadd.i32	$S4,$S4,$D4#lo
-
-	vst4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!
-	vst4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!
-	vst4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-	vst4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-	vst1.32		{${S4}[0]},[$tbl0]
-	vst1.32		{${S4}[1]},[$tbl1]
-
-.Lno_init_neon:
-	ret				@ bx	lr
-.size	poly1305_init_neon,.-poly1305_init_neon
-
-.type	poly1305_blocks_neon,%function
-.align	5
-poly1305_blocks_neon:
-.Lpoly1305_blocks_neon:
-	ldr	ip,[$ctx,#36]		@ is_base2_26
-
-	cmp	$len,#64
-	blo	.Lpoly1305_blocks
-
-	stmdb	sp!,{r4-r7}
-	vstmdb	sp!,{d8-d15}		@ ABI specification says so
-
-	tst	ip,ip			@ is_base2_26?
-	bne	.Lbase2_26_neon
-
-	stmdb	sp!,{r1-r3,lr}
-	bl	.Lpoly1305_init_neon
-
-	ldr	r4,[$ctx,#0]		@ load hash value base 2^32
-	ldr	r5,[$ctx,#4]
-	ldr	r6,[$ctx,#8]
-	ldr	r7,[$ctx,#12]
-	ldr	ip,[$ctx,#16]
-
-	and	r2,r4,#0x03ffffff	@ base 2^32 -> base 2^26
-	mov	r3,r4,lsr#26
-	 veor	$D0#lo,$D0#lo,$D0#lo
-	mov	r4,r5,lsr#20
-	orr	r3,r3,r5,lsl#6
-	 veor	$D1#lo,$D1#lo,$D1#lo
-	mov	r5,r6,lsr#14
-	orr	r4,r4,r6,lsl#12
-	 veor	$D2#lo,$D2#lo,$D2#lo
-	mov	r6,r7,lsr#8
-	orr	r5,r5,r7,lsl#18
-	 veor	$D3#lo,$D3#lo,$D3#lo
-	and	r3,r3,#0x03ffffff
-	orr	r6,r6,ip,lsl#24
-	 veor	$D4#lo,$D4#lo,$D4#lo
-	and	r4,r4,#0x03ffffff
-	mov	r1,#1
-	and	r5,r5,#0x03ffffff
-	str	r1,[$ctx,#36]		@ set is_base2_26
-
-	vmov.32	$D0#lo[0],r2
-	vmov.32	$D1#lo[0],r3
-	vmov.32	$D2#lo[0],r4
-	vmov.32	$D3#lo[0],r5
-	vmov.32	$D4#lo[0],r6
-	adr	$zeros,.Lzeros
-
-	ldmia	sp!,{r1-r3,lr}
-	b	.Lhash_loaded
-
-.align	4
-.Lbase2_26_neon:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ load hash value
-
-	veor		$D0#lo,$D0#lo,$D0#lo
-	veor		$D1#lo,$D1#lo,$D1#lo
-	veor		$D2#lo,$D2#lo,$D2#lo
-	veor		$D3#lo,$D3#lo,$D3#lo
-	veor		$D4#lo,$D4#lo,$D4#lo
-	vld4.32		{$D0#lo[0],$D1#lo[0],$D2#lo[0],$D3#lo[0]},[$ctx]!
-	adr		$zeros,.Lzeros
-	vld1.32		{$D4#lo[0]},[$ctx]
-	sub		$ctx,$ctx,#16		@ rewind
-
-.Lhash_loaded:
-	add		$in2,$inp,#32
-	mov		$padbit,$padbit,lsl#24
-	tst		$len,#31
-	beq		.Leven
-
-	vld4.32		{$H0#lo[0],$H1#lo[0],$H2#lo[0],$H3#lo[0]},[$inp]!
-	vmov.32		$H4#lo[0],$padbit
-	sub		$len,$len,#16
-	add		$in2,$inp,#32
-
-# ifdef	__ARMEB__
-	vrev32.8	$H0,$H0
-	vrev32.8	$H3,$H3
-	vrev32.8	$H1,$H1
-	vrev32.8	$H2,$H2
-# endif
-	vsri.u32	$H4#lo,$H3#lo,#8	@ base 2^32 -> base 2^26
-	vshl.u32	$H3#lo,$H3#lo,#18
-
-	vsri.u32	$H3#lo,$H2#lo,#14
-	vshl.u32	$H2#lo,$H2#lo,#12
-	vadd.i32	$H4#hi,$H4#lo,$D4#lo	@ add hash value and move to #hi
-
-	vbic.i32	$H3#lo,#0xfc000000
-	vsri.u32	$H2#lo,$H1#lo,#20
-	vshl.u32	$H1#lo,$H1#lo,#6
-
-	vbic.i32	$H2#lo,#0xfc000000
-	vsri.u32	$H1#lo,$H0#lo,#26
-	vadd.i32	$H3#hi,$H3#lo,$D3#lo
-
-	vbic.i32	$H0#lo,#0xfc000000
-	vbic.i32	$H1#lo,#0xfc000000
-	vadd.i32	$H2#hi,$H2#lo,$D2#lo
-
-	vadd.i32	$H0#hi,$H0#lo,$D0#lo
-	vadd.i32	$H1#hi,$H1#lo,$D1#lo
-
-	mov		$tbl1,$zeros
-	add		$tbl0,$ctx,#48
-
-	cmp		$len,$len
-	b		.Long_tail
-
-.align	4
-.Leven:
-	subs		$len,$len,#64
-	it		lo
-	movlo		$in2,$zeros
-
-	vmov.i32	$H4,#1<<24		@ padbit, yes, always
-	vld4.32		{$H0#lo,$H1#lo,$H2#lo,$H3#lo},[$inp]	@ inp[0:1]
-	add		$inp,$inp,#64
-	vld4.32		{$H0#hi,$H1#hi,$H2#hi,$H3#hi},[$in2]	@ inp[2:3] (or 0)
-	add		$in2,$in2,#64
-	itt		hi
-	addhi		$tbl1,$ctx,#(48+1*9*4)
-	addhi		$tbl0,$ctx,#(48+3*9*4)
-
-# ifdef	__ARMEB__
-	vrev32.8	$H0,$H0
-	vrev32.8	$H3,$H3
-	vrev32.8	$H1,$H1
-	vrev32.8	$H2,$H2
-# endif
-	vsri.u32	$H4,$H3,#8		@ base 2^32 -> base 2^26
-	vshl.u32	$H3,$H3,#18
-
-	vsri.u32	$H3,$H2,#14
-	vshl.u32	$H2,$H2,#12
-
-	vbic.i32	$H3,#0xfc000000
-	vsri.u32	$H2,$H1,#20
-	vshl.u32	$H1,$H1,#6
-
-	vbic.i32	$H2,#0xfc000000
-	vsri.u32	$H1,$H0,#26
-
-	vbic.i32	$H0,#0xfc000000
-	vbic.i32	$H1,#0xfc000000
-
-	bls		.Lskip_loop
-
-	vld4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!	@ load r^2
-	vld4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!	@ load r^4
-	vld4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-	vld4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-	b		.Loop_neon
-
-.align	5
-.Loop_neon:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
-	@ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
-	@   \___________________/
-	@ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
-	@ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
-	@   \___________________/ \____________________/
-	@
-	@ Note that we start with inp[2:3]*r^2. This is because it
-	@ doesn't depend on reduction in previous iteration.
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-	@ d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-	@ d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-	@ d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-	@ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ inp[2:3]*r^2
-
-	vadd.i32	$H2#lo,$H2#lo,$D2#lo	@ accumulate inp[0:1]
-	vmull.u32	$D2,$H2#hi,${R0}[1]
-	vadd.i32	$H0#lo,$H0#lo,$D0#lo
-	vmull.u32	$D0,$H0#hi,${R0}[1]
-	vadd.i32	$H3#lo,$H3#lo,$D3#lo
-	vmull.u32	$D3,$H3#hi,${R0}[1]
-	vmlal.u32	$D2,$H1#hi,${R1}[1]
-	vadd.i32	$H1#lo,$H1#lo,$D1#lo
-	vmull.u32	$D1,$H1#hi,${R0}[1]
-
-	vadd.i32	$H4#lo,$H4#lo,$D4#lo
-	vmull.u32	$D4,$H4#hi,${R0}[1]
-	subs		$len,$len,#64
-	vmlal.u32	$D0,$H4#hi,${S1}[1]
-	it		lo
-	movlo		$in2,$zeros
-	vmlal.u32	$D3,$H2#hi,${R1}[1]
-	vld1.32		${S4}[1],[$tbl1,:32]
-	vmlal.u32	$D1,$H0#hi,${R1}[1]
-	vmlal.u32	$D4,$H3#hi,${R1}[1]
-
-	vmlal.u32	$D0,$H3#hi,${S2}[1]
-	vmlal.u32	$D3,$H1#hi,${R2}[1]
-	vmlal.u32	$D4,$H2#hi,${R2}[1]
-	vmlal.u32	$D1,$H4#hi,${S2}[1]
-	vmlal.u32	$D2,$H0#hi,${R2}[1]
-
-	vmlal.u32	$D3,$H0#hi,${R3}[1]
-	vmlal.u32	$D0,$H2#hi,${S3}[1]
-	vmlal.u32	$D4,$H1#hi,${R3}[1]
-	vmlal.u32	$D1,$H3#hi,${S3}[1]
-	vmlal.u32	$D2,$H4#hi,${S3}[1]
-
-	vmlal.u32	$D3,$H4#hi,${S4}[1]
-	vmlal.u32	$D0,$H1#hi,${S4}[1]
-	vmlal.u32	$D4,$H0#hi,${R4}[1]
-	vmlal.u32	$D1,$H2#hi,${S4}[1]
-	vmlal.u32	$D2,$H3#hi,${S4}[1]
-
-	vld4.32		{$H0#hi,$H1#hi,$H2#hi,$H3#hi},[$in2]	@ inp[2:3] (or 0)
-	add		$in2,$in2,#64
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ (hash+inp[0:1])*r^4 and accumulate
-
-	vmlal.u32	$D3,$H3#lo,${R0}[0]
-	vmlal.u32	$D0,$H0#lo,${R0}[0]
-	vmlal.u32	$D4,$H4#lo,${R0}[0]
-	vmlal.u32	$D1,$H1#lo,${R0}[0]
-	vmlal.u32	$D2,$H2#lo,${R0}[0]
-	vld1.32		${S4}[0],[$tbl0,:32]
-
-	vmlal.u32	$D3,$H2#lo,${R1}[0]
-	vmlal.u32	$D0,$H4#lo,${S1}[0]
-	vmlal.u32	$D4,$H3#lo,${R1}[0]
-	vmlal.u32	$D1,$H0#lo,${R1}[0]
-	vmlal.u32	$D2,$H1#lo,${R1}[0]
-
-	vmlal.u32	$D3,$H1#lo,${R2}[0]
-	vmlal.u32	$D0,$H3#lo,${S2}[0]
-	vmlal.u32	$D4,$H2#lo,${R2}[0]
-	vmlal.u32	$D1,$H4#lo,${S2}[0]
-	vmlal.u32	$D2,$H0#lo,${R2}[0]
-
-	vmlal.u32	$D3,$H0#lo,${R3}[0]
-	vmlal.u32	$D0,$H2#lo,${S3}[0]
-	vmlal.u32	$D4,$H1#lo,${R3}[0]
-	vmlal.u32	$D1,$H3#lo,${S3}[0]
-	vmlal.u32	$D3,$H4#lo,${S4}[0]
-
-	vmlal.u32	$D2,$H4#lo,${S3}[0]
-	vmlal.u32	$D0,$H1#lo,${S4}[0]
-	vmlal.u32	$D4,$H0#lo,${R4}[0]
-	vmov.i32	$H4,#1<<24		@ padbit, yes, always
-	vmlal.u32	$D1,$H2#lo,${S4}[0]
-	vmlal.u32	$D2,$H3#lo,${S4}[0]
-
-	vld4.32		{$H0#lo,$H1#lo,$H2#lo,$H3#lo},[$inp]	@ inp[0:1]
-	add		$inp,$inp,#64
-# ifdef	__ARMEB__
-	vrev32.8	$H0,$H0
-	vrev32.8	$H1,$H1
-	vrev32.8	$H2,$H2
-	vrev32.8	$H3,$H3
-# endif
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ lazy reduction interleaved with base 2^32 -> base 2^26 of
-	@ inp[0:3] previously loaded to $H0-$H3 and smashed to $H0-$H4.
-
-	vshr.u64	$T0,$D3,#26
-	vmovn.i64	$D3#lo,$D3
-	 vshr.u64	$T1,$D0,#26
-	 vmovn.i64	$D0#lo,$D0
-	vadd.i64	$D4,$D4,$T0		@ h3 -> h4
-	vbic.i32	$D3#lo,#0xfc000000
-	  vsri.u32	$H4,$H3,#8		@ base 2^32 -> base 2^26
-	 vadd.i64	$D1,$D1,$T1		@ h0 -> h1
-	  vshl.u32	$H3,$H3,#18
-	 vbic.i32	$D0#lo,#0xfc000000
-
-	vshrn.u64	$T0#lo,$D4,#26
-	vmovn.i64	$D4#lo,$D4
-	 vshr.u64	$T1,$D1,#26
-	 vmovn.i64	$D1#lo,$D1
-	 vadd.i64	$D2,$D2,$T1		@ h1 -> h2
-	  vsri.u32	$H3,$H2,#14
-	vbic.i32	$D4#lo,#0xfc000000
-	  vshl.u32	$H2,$H2,#12
-	 vbic.i32	$D1#lo,#0xfc000000
-
-	vadd.i32	$D0#lo,$D0#lo,$T0#lo
-	vshl.u32	$T0#lo,$T0#lo,#2
-	  vbic.i32	$H3,#0xfc000000
-	 vshrn.u64	$T1#lo,$D2,#26
-	 vmovn.i64	$D2#lo,$D2
-	vaddl.u32	$D0,$D0#lo,$T0#lo	@ h4 -> h0 [widen for a sec]
-	  vsri.u32	$H2,$H1,#20
-	 vadd.i32	$D3#lo,$D3#lo,$T1#lo	@ h2 -> h3
-	  vshl.u32	$H1,$H1,#6
-	 vbic.i32	$D2#lo,#0xfc000000
-	  vbic.i32	$H2,#0xfc000000
-
-	vshrn.u64	$T0#lo,$D0,#26		@ re-narrow
-	vmovn.i64	$D0#lo,$D0
-	  vsri.u32	$H1,$H0,#26
-	  vbic.i32	$H0,#0xfc000000
-	 vshr.u32	$T1#lo,$D3#lo,#26
-	 vbic.i32	$D3#lo,#0xfc000000
-	vbic.i32	$D0#lo,#0xfc000000
-	vadd.i32	$D1#lo,$D1#lo,$T0#lo	@ h0 -> h1
-	 vadd.i32	$D4#lo,$D4#lo,$T1#lo	@ h3 -> h4
-	  vbic.i32	$H1,#0xfc000000
-
-	bhi		.Loop_neon
-
-.Lskip_loop:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
-
-	add		$tbl1,$ctx,#(48+0*9*4)
-	add		$tbl0,$ctx,#(48+1*9*4)
-	adds		$len,$len,#32
-	it		ne
-	movne		$len,#0
-	bne		.Long_tail
-
-	vadd.i32	$H2#hi,$H2#lo,$D2#lo	@ add hash value and move to #hi
-	vadd.i32	$H0#hi,$H0#lo,$D0#lo
-	vadd.i32	$H3#hi,$H3#lo,$D3#lo
-	vadd.i32	$H1#hi,$H1#lo,$D1#lo
-	vadd.i32	$H4#hi,$H4#lo,$D4#lo
-
-.Long_tail:
-	vld4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!	@ load r^1
-	vld4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!	@ load r^2
-
-	vadd.i32	$H2#lo,$H2#lo,$D2#lo	@ can be redundant
-	vmull.u32	$D2,$H2#hi,$R0
-	vadd.i32	$H0#lo,$H0#lo,$D0#lo
-	vmull.u32	$D0,$H0#hi,$R0
-	vadd.i32	$H3#lo,$H3#lo,$D3#lo
-	vmull.u32	$D3,$H3#hi,$R0
-	vadd.i32	$H1#lo,$H1#lo,$D1#lo
-	vmull.u32	$D1,$H1#hi,$R0
-	vadd.i32	$H4#lo,$H4#lo,$D4#lo
-	vmull.u32	$D4,$H4#hi,$R0
-
-	vmlal.u32	$D0,$H4#hi,$S1
-	vld4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-	vmlal.u32	$D3,$H2#hi,$R1
-	vld4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-	vmlal.u32	$D1,$H0#hi,$R1
-	vmlal.u32	$D4,$H3#hi,$R1
-	vmlal.u32	$D2,$H1#hi,$R1
-
-	vmlal.u32	$D3,$H1#hi,$R2
-	vld1.32		${S4}[1],[$tbl1,:32]
-	vmlal.u32	$D0,$H3#hi,$S2
-	vld1.32		${S4}[0],[$tbl0,:32]
-	vmlal.u32	$D4,$H2#hi,$R2
-	vmlal.u32	$D1,$H4#hi,$S2
-	vmlal.u32	$D2,$H0#hi,$R2
-
-	vmlal.u32	$D3,$H0#hi,$R3
-	 it		ne
-	 addne		$tbl1,$ctx,#(48+2*9*4)
-	vmlal.u32	$D0,$H2#hi,$S3
-	 it		ne
-	 addne		$tbl0,$ctx,#(48+3*9*4)
-	vmlal.u32	$D4,$H1#hi,$R3
-	vmlal.u32	$D1,$H3#hi,$S3
-	vmlal.u32	$D2,$H4#hi,$S3
-
-	vmlal.u32	$D3,$H4#hi,$S4
-	 vorn		$MASK,$MASK,$MASK	@ all-ones, can be redundant
-	vmlal.u32	$D0,$H1#hi,$S4
-	 vshr.u64	$MASK,$MASK,#38
-	vmlal.u32	$D4,$H0#hi,$R4
-	vmlal.u32	$D1,$H2#hi,$S4
-	vmlal.u32	$D2,$H3#hi,$S4
-
-	beq		.Lshort_tail
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ (hash+inp[0:1])*r^4:r^3 and accumulate
-
-	vld4.32		{${R0}[1],${R1}[1],${S1}[1],${R2}[1]},[$tbl1]!	@ load r^3
-	vld4.32		{${R0}[0],${R1}[0],${S1}[0],${R2}[0]},[$tbl0]!	@ load r^4
-
-	vmlal.u32	$D2,$H2#lo,$R0
-	vmlal.u32	$D0,$H0#lo,$R0
-	vmlal.u32	$D3,$H3#lo,$R0
-	vmlal.u32	$D1,$H1#lo,$R0
-	vmlal.u32	$D4,$H4#lo,$R0
-
-	vmlal.u32	$D0,$H4#lo,$S1
-	vld4.32		{${S2}[1],${R3}[1],${S3}[1],${R4}[1]},[$tbl1]!
-	vmlal.u32	$D3,$H2#lo,$R1
-	vld4.32		{${S2}[0],${R3}[0],${S3}[0],${R4}[0]},[$tbl0]!
-	vmlal.u32	$D1,$H0#lo,$R1
-	vmlal.u32	$D4,$H3#lo,$R1
-	vmlal.u32	$D2,$H1#lo,$R1
-
-	vmlal.u32	$D3,$H1#lo,$R2
-	vld1.32		${S4}[1],[$tbl1,:32]
-	vmlal.u32	$D0,$H3#lo,$S2
-	vld1.32		${S4}[0],[$tbl0,:32]
-	vmlal.u32	$D4,$H2#lo,$R2
-	vmlal.u32	$D1,$H4#lo,$S2
-	vmlal.u32	$D2,$H0#lo,$R2
-
-	vmlal.u32	$D3,$H0#lo,$R3
-	vmlal.u32	$D0,$H2#lo,$S3
-	vmlal.u32	$D4,$H1#lo,$R3
-	vmlal.u32	$D1,$H3#lo,$S3
-	vmlal.u32	$D2,$H4#lo,$S3
-
-	vmlal.u32	$D3,$H4#lo,$S4
-	 vorn		$MASK,$MASK,$MASK	@ all-ones
-	vmlal.u32	$D0,$H1#lo,$S4
-	 vshr.u64	$MASK,$MASK,#38
-	vmlal.u32	$D4,$H0#lo,$R4
-	vmlal.u32	$D1,$H2#lo,$S4
-	vmlal.u32	$D2,$H3#lo,$S4
-
-.Lshort_tail:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ horizontal addition
-
-	vadd.i64	$D3#lo,$D3#lo,$D3#hi
-	vadd.i64	$D0#lo,$D0#lo,$D0#hi
-	vadd.i64	$D4#lo,$D4#lo,$D4#hi
-	vadd.i64	$D1#lo,$D1#lo,$D1#hi
-	vadd.i64	$D2#lo,$D2#lo,$D2#hi
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ lazy reduction, but without narrowing
-
-	vshr.u64	$T0,$D3,#26
-	vand.i64	$D3,$D3,$MASK
-	 vshr.u64	$T1,$D0,#26
-	 vand.i64	$D0,$D0,$MASK
-	vadd.i64	$D4,$D4,$T0		@ h3 -> h4
-	 vadd.i64	$D1,$D1,$T1		@ h0 -> h1
-
-	vshr.u64	$T0,$D4,#26
-	vand.i64	$D4,$D4,$MASK
-	 vshr.u64	$T1,$D1,#26
-	 vand.i64	$D1,$D1,$MASK
-	 vadd.i64	$D2,$D2,$T1		@ h1 -> h2
-
-	vadd.i64	$D0,$D0,$T0
-	vshl.u64	$T0,$T0,#2
-	 vshr.u64	$T1,$D2,#26
-	 vand.i64	$D2,$D2,$MASK
-	vadd.i64	$D0,$D0,$T0		@ h4 -> h0
-	 vadd.i64	$D3,$D3,$T1		@ h2 -> h3
-
-	vshr.u64	$T0,$D0,#26
-	vand.i64	$D0,$D0,$MASK
-	 vshr.u64	$T1,$D3,#26
-	 vand.i64	$D3,$D3,$MASK
-	vadd.i64	$D1,$D1,$T0		@ h0 -> h1
-	 vadd.i64	$D4,$D4,$T1		@ h3 -> h4
-
-	cmp		$len,#0
-	bne		.Leven
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ store hash value
-
-	vst4.32		{$D0#lo[0],$D1#lo[0],$D2#lo[0],$D3#lo[0]},[$ctx]!
-	vst1.32		{$D4#lo[0]},[$ctx]
-
-	vldmia	sp!,{d8-d15}			@ epilogue
-	ldmia	sp!,{r4-r7}
-	ret					@ bx	lr
-.size	poly1305_blocks_neon,.-poly1305_blocks_neon
-
-.align	5
-.Lzeros:
-.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-#ifndef	__KERNEL__
-.LOPENSSL_armcap:
-# ifdef	_WIN32
-.word	OPENSSL_armcap_P
-# else
-.word	OPENSSL_armcap_P-.Lpoly1305_init
-# endif
-.comm	OPENSSL_armcap_P,4,4
-.hidden	OPENSSL_armcap_P
-#endif
-#endif
-___
-}	}
-$code.=<<___;
-.asciz	"Poly1305 for ARMv4/NEON, CRYPTOGAMS by \@dot-asm"
-.align	2
-___
-
-foreach (split("\n",$code)) {
-	s/\`([^\`]*)\`/eval $1/geo;
-
-	s/\bq([0-9]+)#(lo|hi)/sprintf "d%d",2*$1+($2 eq "hi")/geo	or
-	s/\bret\b/bx	lr/go						or
-	s/\bbx\s+lr\b/.word\t0xe12fff1e/go;	# make it possible to compile with -march=armv4
-
-	print $_,"\n";
-}
-close STDOUT; # enforce flush
diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c
deleted file mode 100644
index 4464ffbf8fd1..000000000000
--- a/arch/arm/crypto/poly1305-glue.c
+++ /dev/null
@@ -1,274 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OpenSSL/Cryptogams accelerated Poly1305 transform for ARM
- *
- * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
-#include <crypto/algapi.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/poly1305.h>
-#include <crypto/internal/simd.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/jump_label.h>
-#include <linux/module.h>
-
-void poly1305_init_arm(void *state, const u8 *key);
-void poly1305_blocks_arm(void *state, const u8 *src, u32 len, u32 hibit);
-void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit);
-void poly1305_emit_arm(void *state, u8 *digest, const u32 *nonce);
-
-void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
-{
-}
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
-{
-	poly1305_init_arm(&dctx->h, key);
-	dctx->s[0] = get_unaligned_le32(key + 16);
-	dctx->s[1] = get_unaligned_le32(key + 20);
-	dctx->s[2] = get_unaligned_le32(key + 24);
-	dctx->s[3] = get_unaligned_le32(key + 28);
-	dctx->buflen = 0;
-}
-EXPORT_SYMBOL(poly1305_init_arch);
-
-static int arm_poly1305_init(struct shash_desc *desc)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	dctx->buflen = 0;
-	dctx->rset = 0;
-	dctx->sset = false;
-
-	return 0;
-}
-
-static void arm_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-				 u32 len, u32 hibit, bool do_neon)
-{
-	if (unlikely(!dctx->sset)) {
-		if (!dctx->rset) {
-			poly1305_init_arm(&dctx->h, src);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->rset = 1;
-		}
-		if (len >= POLY1305_BLOCK_SIZE) {
-			dctx->s[0] = get_unaligned_le32(src +  0);
-			dctx->s[1] = get_unaligned_le32(src +  4);
-			dctx->s[2] = get_unaligned_le32(src +  8);
-			dctx->s[3] = get_unaligned_le32(src + 12);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->sset = true;
-		}
-		if (len < POLY1305_BLOCK_SIZE)
-			return;
-	}
-
-	len &= ~(POLY1305_BLOCK_SIZE - 1);
-
-	if (static_branch_likely(&have_neon) && likely(do_neon))
-		poly1305_blocks_neon(&dctx->h, src, len, hibit);
-	else
-		poly1305_blocks_arm(&dctx->h, src, len, hibit);
-}
-
-static void arm_poly1305_do_update(struct poly1305_desc_ctx *dctx,
-				    const u8 *src, u32 len, bool do_neon)
-{
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		len -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			arm_poly1305_blocks(dctx, dctx->buf,
-					    POLY1305_BLOCK_SIZE, 1, false);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(len >= POLY1305_BLOCK_SIZE)) {
-		arm_poly1305_blocks(dctx, src, len, 1, do_neon);
-		src += round_down(len, POLY1305_BLOCK_SIZE);
-		len %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(len)) {
-		dctx->buflen = len;
-		memcpy(dctx->buf, src, len);
-	}
-}
-
-static int arm_poly1305_update(struct shash_desc *desc,
-			       const u8 *src, unsigned int srclen)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	arm_poly1305_do_update(dctx, src, srclen, false);
-	return 0;
-}
-
-static int __maybe_unused arm_poly1305_update_neon(struct shash_desc *desc,
-						   const u8 *src,
-						   unsigned int srclen)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-	bool do_neon = crypto_simd_usable() && srclen > 128;
-
-	if (static_branch_likely(&have_neon) && do_neon)
-		kernel_neon_begin();
-	arm_poly1305_do_update(dctx, src, srclen, do_neon);
-	if (static_branch_likely(&have_neon) && do_neon)
-		kernel_neon_end();
-	return 0;
-}
-
-void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-			  unsigned int nbytes)
-{
-	bool do_neon = IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
-		       crypto_simd_usable();
-
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		nbytes -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			poly1305_blocks_arm(&dctx->h, dctx->buf,
-					    POLY1305_BLOCK_SIZE, 1);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
-
-		if (static_branch_likely(&have_neon) && do_neon) {
-			do {
-				unsigned int todo = min_t(unsigned int, len, SZ_4K);
-
-				kernel_neon_begin();
-				poly1305_blocks_neon(&dctx->h, src, todo, 1);
-				kernel_neon_end();
-
-				len -= todo;
-				src += todo;
-			} while (len);
-		} else {
-			poly1305_blocks_arm(&dctx->h, src, len, 1);
-			src += len;
-		}
-		nbytes %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(nbytes)) {
-		dctx->buflen = nbytes;
-		memcpy(dctx->buf, src, nbytes);
-	}
-}
-EXPORT_SYMBOL(poly1305_update_arch);
-
-void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
-{
-	if (unlikely(dctx->buflen)) {
-		dctx->buf[dctx->buflen++] = 1;
-		memset(dctx->buf + dctx->buflen, 0,
-		       POLY1305_BLOCK_SIZE - dctx->buflen);
-		poly1305_blocks_arm(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-	}
-
-	poly1305_emit_arm(&dctx->h, dst, dctx->s);
-	*dctx = (struct poly1305_desc_ctx){};
-}
-EXPORT_SYMBOL(poly1305_final_arch);
-
-static int arm_poly1305_final(struct shash_desc *desc, u8 *dst)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (unlikely(!dctx->sset))
-		return -ENOKEY;
-
-	poly1305_final_arch(dctx, dst);
-	return 0;
-}
-
-static struct shash_alg arm_poly1305_algs[] = {{
-	.init			= arm_poly1305_init,
-	.update			= arm_poly1305_update,
-	.final			= arm_poly1305_final,
-	.digestsize		= POLY1305_DIGEST_SIZE,
-	.descsize		= sizeof(struct poly1305_desc_ctx),
-
-	.base.cra_name		= "poly1305",
-	.base.cra_driver_name	= "poly1305-arm",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-#ifdef CONFIG_KERNEL_MODE_NEON
-}, {
-	.init			= arm_poly1305_init,
-	.update			= arm_poly1305_update_neon,
-	.final			= arm_poly1305_final,
-	.digestsize		= POLY1305_DIGEST_SIZE,
-	.descsize		= sizeof(struct poly1305_desc_ctx),
-
-	.base.cra_name		= "poly1305",
-	.base.cra_driver_name	= "poly1305-neon",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-#endif
-}};
-
-static int __init arm_poly1305_mod_init(void)
-{
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
-	    (elf_hwcap & HWCAP_NEON))
-		static_branch_enable(&have_neon);
-	else if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		/* register only the first entry */
-		return crypto_register_shash(&arm_poly1305_algs[0]);
-
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shashes(arm_poly1305_algs,
-					ARRAY_SIZE(arm_poly1305_algs)) : 0;
-}
-
-static void __exit arm_poly1305_mod_exit(void)
-{
-	if (!IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		return;
-	if (!static_branch_likely(&have_neon)) {
-		crypto_unregister_shash(&arm_poly1305_algs[0]);
-		return;
-	}
-	crypto_unregister_shashes(arm_poly1305_algs,
-				  ARRAY_SIZE(arm_poly1305_algs));
-}
-
-module_init(arm_poly1305_mod_init);
-module_exit(arm_poly1305_mod_exit);
-
-MODULE_DESCRIPTION("Accelerated Poly1305 transform for ARM");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("poly1305");
-MODULE_ALIAS_CRYPTO("poly1305-arm");
-MODULE_ALIAS_CRYPTO("poly1305-neon");
diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
deleted file mode 100644
index 1c8b685149f2..000000000000
--- a/arch/arm/crypto/sha1-armv4-large.S
+++ /dev/null
@@ -1,507 +0,0 @@
-#define __ARM_ARCH__ __LINUX_ARM_ARCH__
-@ SPDX-License-Identifier: GPL-2.0
-
-@ This code is taken from the OpenSSL project but the author (Andy Polyakov)
-@ has relicensed it under the GPLv2. Therefore this program is free software;
-@ you can redistribute it and/or modify it under the terms of the GNU General
-@ Public License version 2 as published by the Free Software Foundation.
-@
-@ The original headers, including the original license headers, are
-@ included below for completeness.
-
-@ ====================================================================
-@ Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-@ project. The module is, however, dual licensed under OpenSSL and
-@ CRYPTOGAMS licenses depending on where you obtain it. For further
-@ details see https://www.openssl.org/~appro/cryptogams/.
-@ ====================================================================
-
-@ sha1_block procedure for ARMv4.
-@
-@ January 2007.
-
-@ Size/performance trade-off
-@ ====================================================================
-@ impl		size in bytes	comp cycles[*]	measured performance
-@ ====================================================================
-@ thumb		304		3212		4420
-@ armv4-small	392/+29%	1958/+64%	2250/+96%
-@ armv4-compact	740/+89%	1552/+26%	1840/+22%
-@ armv4-large	1420/+92%	1307/+19%	1370/+34%[***]
-@ full unroll	~5100/+260%	~1260/+4%	~1300/+5%
-@ ====================================================================
-@ thumb		= same as 'small' but in Thumb instructions[**] and
-@		  with recurring code in two private functions;
-@ small		= detached Xload/update, loops are folded;
-@ compact	= detached Xload/update, 5x unroll;
-@ large		= interleaved Xload/update, 5x unroll;
-@ full unroll	= interleaved Xload/update, full unroll, estimated[!];
-@
-@ [*]	Manually counted instructions in "grand" loop body. Measured
-@	performance is affected by prologue and epilogue overhead,
-@	i-cache availability, branch penalties, etc.
-@ [**]	While each Thumb instruction is twice smaller, they are not as
-@	diverse as ARM ones: e.g., there are only two arithmetic
-@	instructions with 3 arguments, no [fixed] rotate, addressing
-@	modes are limited. As result it takes more instructions to do
-@	the same job in Thumb, therefore the code is never twice as
-@	small and always slower.
-@ [***]	which is also ~35% better than compiler generated code. Dual-
-@	issue Cortex A8 core was measured to process input block in
-@	~990 cycles.
-
-@ August 2010.
-@
-@ Rescheduling for dual-issue pipeline resulted in 13% improvement on
-@ Cortex A8 core and in absolute terms ~870 cycles per input block
-@ [or 13.6 cycles per byte].
-
-@ February 2011.
-@
-@ Profiler-assisted and platform-specific optimization resulted in 10%
-@ improvement on Cortex A8 core and 12.2 cycles per byte.
-
-#include <linux/linkage.h>
-
-.text
-
-.align	2
-ENTRY(sha1_block_data_order)
-	stmdb	sp!,{r4-r12,lr}
-	add	r2,r1,r2,lsl#6	@ r2 to point at the end of r1
-	ldmia	r0,{r3,r4,r5,r6,r7}
-.Lloop:
-	ldr	r8,.LK_00_19
-	mov	r14,sp
-	sub	sp,sp,#15*4
-	mov	r5,r5,ror#30
-	mov	r6,r6,ror#30
-	mov	r7,r7,ror#30		@ [6]
-.L_00_15:
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r7,r8,r7,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r5,r6			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r7,r8,r7,ror#2			@ E+=K_00_19
-	eor	r10,r5,r6			@ F_xx_xx
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r4,r10,ror#2
-	add	r7,r7,r9			@ E+=X[i]
-	eor	r10,r10,r6,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r7,r7,r10			@ E+=F_00_19(B,C,D)
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r6,r8,r6,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r4,r5			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r6,r8,r6,ror#2			@ E+=K_00_19
-	eor	r10,r4,r5			@ F_xx_xx
-	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r3,r10,ror#2
-	add	r6,r6,r9			@ E+=X[i]
-	eor	r10,r10,r5,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r6,r6,r10			@ E+=F_00_19(B,C,D)
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r5,r8,r5,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r3,r4			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r5,r8,r5,ror#2			@ E+=K_00_19
-	eor	r10,r3,r4			@ F_xx_xx
-	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r7,r10,ror#2
-	add	r5,r5,r9			@ E+=X[i]
-	eor	r10,r10,r4,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r5,r5,r10			@ E+=F_00_19(B,C,D)
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r4,r8,r4,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r7,r3			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r4,r8,r4,ror#2			@ E+=K_00_19
-	eor	r10,r7,r3			@ F_xx_xx
-	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r6,r10,ror#2
-	add	r4,r4,r9			@ E+=X[i]
-	eor	r10,r10,r3,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r4,r4,r10			@ E+=F_00_19(B,C,D)
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r3,r8,r3,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r6,r7			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r3,r8,r3,ror#2			@ E+=K_00_19
-	eor	r10,r6,r7			@ F_xx_xx
-	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r5,r10,ror#2
-	add	r3,r3,r9			@ E+=X[i]
-	eor	r10,r10,r7,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
-	cmp	r14,sp
-	bne	.L_00_15		@ [((11+4)*5+2)*3]
-	sub	sp,sp,#25*4
-#if __ARM_ARCH__<7
-	ldrb	r10,[r1,#2]
-	ldrb	r9,[r1,#3]
-	ldrb	r11,[r1,#1]
-	add	r7,r8,r7,ror#2			@ E+=K_00_19
-	ldrb	r12,[r1],#4
-	orr	r9,r9,r10,lsl#8
-	eor	r10,r5,r6			@ F_xx_xx
-	orr	r9,r9,r11,lsl#16
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-	orr	r9,r9,r12,lsl#24
-#else
-	ldr	r9,[r1],#4			@ handles unaligned
-	add	r7,r8,r7,ror#2			@ E+=K_00_19
-	eor	r10,r5,r6			@ F_xx_xx
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-#ifdef __ARMEL__
-	rev	r9,r9				@ byte swap
-#endif
-#endif
-	and	r10,r4,r10,ror#2
-	add	r7,r7,r9			@ E+=X[i]
-	eor	r10,r10,r6,ror#2		@ F_00_19(B,C,D)
-	str	r9,[r14,#-4]!
-	add	r7,r7,r10			@ E+=F_00_19(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r4,r5			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r3,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r6,r6,r9			@ E+=X[i]
-	eor	r10,r10,r5,ror#2		@ F_00_19(B,C,D)
-	add	r6,r6,r10			@ E+=F_00_19(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r3,r4			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r7,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r5,r5,r9			@ E+=X[i]
-	eor	r10,r10,r4,ror#2		@ F_00_19(B,C,D)
-	add	r5,r5,r10			@ E+=F_00_19(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r7,r3			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r6,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r4,r4,r9			@ E+=X[i]
-	eor	r10,r10,r3,ror#2		@ F_00_19(B,C,D)
-	add	r4,r4,r10			@ E+=F_00_19(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r6,r7			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r5,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r3,r3,r9			@ E+=X[i]
-	eor	r10,r10,r7,ror#2		@ F_00_19(B,C,D)
-	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
-
-	ldr	r8,.LK_20_39		@ [+15+16*4]
-	cmn	sp,#0			@ [+3], clear carry to denote 20_39
-.L_20_39_or_60_79:
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r7,r8,r7,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r5,r6			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	eor r10,r4,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r7,r7,r9			@ E+=X[i]
-	add	r7,r7,r10			@ E+=F_20_39(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r4,r5			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	eor r10,r3,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r6,r6,r9			@ E+=X[i]
-	add	r6,r6,r10			@ E+=F_20_39(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r3,r4			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	eor r10,r7,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r5,r5,r9			@ E+=X[i]
-	add	r5,r5,r10			@ E+=F_20_39(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r7,r3			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	eor r10,r6,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r4,r4,r9			@ E+=X[i]
-	add	r4,r4,r10			@ E+=F_20_39(B,C,D)
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r6,r7			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	eor r10,r5,r10,ror#2					@ F_xx_xx
-						@ F_xx_xx
-	add	r3,r3,r9			@ E+=X[i]
-	add	r3,r3,r10			@ E+=F_20_39(B,C,D)
- ARM(	teq	r14,sp		)	@ preserve carry
- THUMB(	mov	r11,sp		)
- THUMB(	teq	r14,r11		)	@ preserve carry
-	bne	.L_20_39_or_60_79	@ [+((12+3)*5+2)*4]
-	bcs	.L_done			@ [+((12+3)*5+2)*4], spare 300 bytes
-
-	ldr	r8,.LK_40_59
-	sub	sp,sp,#20*4		@ [+2]
-.L_40_59:
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r7,r8,r7,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r5,r6			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r4,r10,ror#2					@ F_xx_xx
-	and r11,r5,r6					@ F_xx_xx
-	add	r7,r7,r9			@ E+=X[i]
-	add	r7,r7,r10			@ E+=F_40_59(B,C,D)
-	add	r7,r7,r11,ror#2
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r4,r5			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r3,r10,ror#2					@ F_xx_xx
-	and r11,r4,r5					@ F_xx_xx
-	add	r6,r6,r9			@ E+=X[i]
-	add	r6,r6,r10			@ E+=F_40_59(B,C,D)
-	add	r6,r6,r11,ror#2
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r3,r4			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r7,r10,ror#2					@ F_xx_xx
-	and r11,r3,r4					@ F_xx_xx
-	add	r5,r5,r9			@ E+=X[i]
-	add	r5,r5,r10			@ E+=F_40_59(B,C,D)
-	add	r5,r5,r11,ror#2
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r7,r3			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r6,r10,ror#2					@ F_xx_xx
-	and r11,r7,r3					@ F_xx_xx
-	add	r4,r4,r9			@ E+=X[i]
-	add	r4,r4,r10			@ E+=F_40_59(B,C,D)
-	add	r4,r4,r11,ror#2
-	ldr	r9,[r14,#15*4]
-	ldr	r10,[r14,#13*4]
-	ldr	r11,[r14,#7*4]
-	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
-	ldr	r12,[r14,#2*4]
-	eor	r9,r9,r10
-	eor	r11,r11,r12			@ 1 cycle stall
-	eor	r10,r6,r7			@ F_xx_xx
-	mov	r9,r9,ror#31
-	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
-	eor	r9,r9,r11,ror#31
-	str	r9,[r14,#-4]!
-	and r10,r5,r10,ror#2					@ F_xx_xx
-	and r11,r6,r7					@ F_xx_xx
-	add	r3,r3,r9			@ E+=X[i]
-	add	r3,r3,r10			@ E+=F_40_59(B,C,D)
-	add	r3,r3,r11,ror#2
-	cmp	r14,sp
-	bne	.L_40_59		@ [+((12+5)*5+2)*4]
-
-	ldr	r8,.LK_60_79
-	sub	sp,sp,#20*4
-	cmp	sp,#0			@ set carry to denote 60_79
-	b	.L_20_39_or_60_79	@ [+4], spare 300 bytes
-.L_done:
-	add	sp,sp,#80*4		@ "deallocate" stack frame
-	ldmia	r0,{r8,r9,r10,r11,r12}
-	add	r3,r8,r3
-	add	r4,r9,r4
-	add	r5,r10,r5,ror#2
-	add	r6,r11,r6,ror#2
-	add	r7,r12,r7,ror#2
-	stmia	r0,{r3,r4,r5,r6,r7}
-	teq	r1,r2
-	bne	.Lloop			@ [+18], total 1307
-
-	ldmia	sp!,{r4-r12,pc}
-.align	2
-.LK_00_19:	.word	0x5a827999
-.LK_20_39:	.word	0x6ed9eba1
-.LK_40_59:	.word	0x8f1bbcdc
-.LK_60_79:	.word	0xca62c1d6
-ENDPROC(sha1_block_data_order)
-.asciz	"SHA1 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>"
-.align	2
diff --git a/arch/arm/crypto/sha1-armv7-neon.S b/arch/arm/crypto/sha1-armv7-neon.S
deleted file mode 100644
index 28d816a6a530..000000000000
--- a/arch/arm/crypto/sha1-armv7-neon.S
+++ /dev/null
@@ -1,634 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/* sha1-armv7-neon.S - ARM/NEON accelerated SHA-1 transform function
- *
- * Copyright © 2013-2014 Jussi Kivilinna <jussi.kivilinna@iki.fi>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-.syntax unified
-.fpu neon
-
-.text
-
-
-/* Context structure */
-
-#define state_h0 0
-#define state_h1 4
-#define state_h2 8
-#define state_h3 12
-#define state_h4 16
-
-
-/* Constants */
-
-#define K1  0x5A827999
-#define K2  0x6ED9EBA1
-#define K3  0x8F1BBCDC
-#define K4  0xCA62C1D6
-.align 4
-.LK_VEC:
-.LK1:	.long K1, K1, K1, K1
-.LK2:	.long K2, K2, K2, K2
-.LK3:	.long K3, K3, K3, K3
-.LK4:	.long K4, K4, K4, K4
-
-
-/* Register macros */
-
-#define RSTATE r0
-#define RDATA r1
-#define RNBLKS r2
-#define ROLDSTACK r3
-#define RWK lr
-
-#define _a r4
-#define _b r5
-#define _c r6
-#define _d r7
-#define _e r8
-
-#define RT0 r9
-#define RT1 r10
-#define RT2 r11
-#define RT3 r12
-
-#define W0 q0
-#define W1 q7
-#define W2 q2
-#define W3 q3
-#define W4 q4
-#define W5 q6
-#define W6 q5
-#define W7 q1
-
-#define tmp0 q8
-#define tmp1 q9
-#define tmp2 q10
-#define tmp3 q11
-
-#define qK1 q12
-#define qK2 q13
-#define qK3 q14
-#define qK4 q15
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-#define ARM_LE(code...)
-#else
-#define ARM_LE(code...)		code
-#endif
-
-/* Round function macros. */
-
-#define WK_offs(i) (((i) & 15) * 4)
-
-#define _R_F1(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	      W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	ldr RT3, [sp, WK_offs(i)]; \
-		pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	bic RT0, d, b; \
-	add e, e, a, ror #(32 - 5); \
-	and RT1, c, b; \
-		pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	add RT0, RT0, RT3; \
-	add e, e, RT1; \
-	ror b, #(32 - 30); \
-		pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	add e, e, RT0;
-
-#define _R_F2(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	      W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	ldr RT3, [sp, WK_offs(i)]; \
-		pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	eor RT0, d, b; \
-	add e, e, a, ror #(32 - 5); \
-	eor RT0, RT0, c; \
-		pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	add e, e, RT3; \
-	ror b, #(32 - 30); \
-		pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	add e, e, RT0; \
-
-#define _R_F3(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	      W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	ldr RT3, [sp, WK_offs(i)]; \
-		pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	eor RT0, b, c; \
-	and RT1, b, c; \
-	add e, e, a, ror #(32 - 5); \
-		pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	and RT0, RT0, d; \
-	add RT1, RT1, RT3; \
-	add e, e, RT0; \
-	ror b, #(32 - 30); \
-		pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \
-	add e, e, RT1;
-
-#define _R_F4(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	      W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	_R_F2(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	      W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28)
-
-#define _R(a,b,c,d,e,f,i,pre1,pre2,pre3,i16,\
-           W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	_R_##f(a,b,c,d,e,i,pre1,pre2,pre3,i16,\
-	       W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28)
-
-#define R(a,b,c,d,e,f,i) \
-	_R_##f(a,b,c,d,e,i,dummy,dummy,dummy,i16,\
-	       W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28)
-
-#define dummy(...)
-
-
-/* Input expansion macros. */
-
-/********* Precalc macros for rounds 0-15 *************************************/
-
-#define W_PRECALC_00_15() \
-	add       RWK, sp, #(WK_offs(0));			\
-	\
-	vld1.32   {W0, W7}, [RDATA]!;				\
- ARM_LE(vrev32.8  W0, W0;	)	/* big => little */	\
-	vld1.32   {W6, W5}, [RDATA]!;				\
-	vadd.u32  tmp0, W0, curK;				\
- ARM_LE(vrev32.8  W7, W7;	)	/* big => little */	\
- ARM_LE(vrev32.8  W6, W6;	)	/* big => little */	\
-	vadd.u32  tmp1, W7, curK;				\
- ARM_LE(vrev32.8  W5, W5;	)	/* big => little */	\
-	vadd.u32  tmp2, W6, curK;				\
-	vst1.32   {tmp0, tmp1}, [RWK]!;				\
-	vadd.u32  tmp3, W5, curK;				\
-	vst1.32   {tmp2, tmp3}, [RWK];				\
-
-#define WPRECALC_00_15_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vld1.32   {W0, W7}, [RDATA]!;				\
-
-#define WPRECALC_00_15_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	add       RWK, sp, #(WK_offs(0));			\
-
-#define WPRECALC_00_15_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
- ARM_LE(vrev32.8  W0, W0;	)	/* big => little */	\
-
-#define WPRECALC_00_15_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vld1.32   {W6, W5}, [RDATA]!;				\
-
-#define WPRECALC_00_15_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32  tmp0, W0, curK;				\
-
-#define WPRECALC_00_15_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
- ARM_LE(vrev32.8  W7, W7;	)	/* big => little */	\
-
-#define WPRECALC_00_15_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
- ARM_LE(vrev32.8  W6, W6;	)	/* big => little */	\
-
-#define WPRECALC_00_15_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32  tmp1, W7, curK;				\
-
-#define WPRECALC_00_15_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
- ARM_LE(vrev32.8  W5, W5;	)	/* big => little */	\
-
-#define WPRECALC_00_15_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32  tmp2, W6, curK;				\
-
-#define WPRECALC_00_15_10(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vst1.32   {tmp0, tmp1}, [RWK]!;				\
-
-#define WPRECALC_00_15_11(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32  tmp3, W5, curK;				\
-
-#define WPRECALC_00_15_12(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vst1.32   {tmp2, tmp3}, [RWK];				\
-
-
-/********* Precalc macros for rounds 16-31 ************************************/
-
-#define WPRECALC_16_31_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor      tmp0, tmp0;			\
-	vext.8    W, W_m16, W_m12, #8;		\
-
-#define WPRECALC_16_31_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	add       RWK, sp, #(WK_offs(i));	\
-	vext.8    tmp0, W_m04, tmp0, #4;	\
-
-#define WPRECALC_16_31_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor      tmp0, tmp0, W_m16;		\
-	veor.32   W, W, W_m08;			\
-
-#define WPRECALC_16_31_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor      tmp1, tmp1;			\
-	veor      W, W, tmp0;			\
-
-#define WPRECALC_16_31_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vshl.u32  tmp0, W, #1;			\
-
-#define WPRECALC_16_31_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vext.8    tmp1, tmp1, W, #(16-12);	\
-	vshr.u32  W, W, #31;			\
-
-#define WPRECALC_16_31_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vorr      tmp0, tmp0, W;		\
-	vshr.u32  W, tmp1, #30;			\
-
-#define WPRECALC_16_31_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vshl.u32  tmp1, tmp1, #2;		\
-
-#define WPRECALC_16_31_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor      tmp0, tmp0, W;		\
-
-#define WPRECALC_16_31_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor      W, tmp0, tmp1;		\
-
-#define WPRECALC_16_31_10(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32  tmp0, W, curK;		\
-
-#define WPRECALC_16_31_11(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vst1.32   {tmp0}, [RWK];
-
-
-/********* Precalc macros for rounds 32-79 ************************************/
-
-#define WPRECALC_32_79_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor W, W_m28; \
-
-#define WPRECALC_32_79_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vext.8 tmp0, W_m08, W_m04, #8; \
-
-#define WPRECALC_32_79_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor W, W_m16; \
-
-#define WPRECALC_32_79_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	veor W, tmp0; \
-
-#define WPRECALC_32_79_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	add RWK, sp, #(WK_offs(i&~3)); \
-
-#define WPRECALC_32_79_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vshl.u32 tmp1, W, #2; \
-
-#define WPRECALC_32_79_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vshr.u32 tmp0, W, #30; \
-
-#define WPRECALC_32_79_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vorr W, tmp0, tmp1; \
-
-#define WPRECALC_32_79_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vadd.u32 tmp0, W, curK; \
-
-#define WPRECALC_32_79_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
-	vst1.32 {tmp0}, [RWK];
-
-
-/*
- * Transform nblks*64 bytes (nblks*16 32-bit words) at DATA.
- *
- * unsigned int
- * sha1_transform_neon (void *ctx, const unsigned char *data,
- *                      unsigned int nblks)
- */
-.align 3
-ENTRY(sha1_transform_neon)
-  /* input:
-   *	r0: ctx, CTX
-   *	r1: data (64*nblks bytes)
-   *	r2: nblks
-   */
-
-  cmp RNBLKS, #0;
-  beq .Ldo_nothing;
-
-  push {r4-r12, lr};
-  /*vpush {q4-q7};*/
-
-  adr RT3, .LK_VEC;
-
-  mov ROLDSTACK, sp;
-
-  /* Align stack. */
-  sub RT0, sp, #(16*4);
-  and RT0, #(~(16-1));
-  mov sp, RT0;
-
-  vld1.32 {qK1-qK2}, [RT3]!; /* Load K1,K2 */
-
-  /* Get the values of the chaining variables. */
-  ldm RSTATE, {_a-_e};
-
-  vld1.32 {qK3-qK4}, [RT3]; /* Load K3,K4 */
-
-#undef curK
-#define curK qK1
-  /* Precalc 0-15. */
-  W_PRECALC_00_15();
-
-.Loop:
-  /* Transform 0-15 + Precalc 16-31. */
-  _R( _a, _b, _c, _d, _e, F1,  0,
-      WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 16,
-      W4, W5, W6, W7, W0, _, _, _ );
-  _R( _e, _a, _b, _c, _d, F1,  1,
-      WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 16,
-      W4, W5, W6, W7, W0, _, _, _ );
-  _R( _d, _e, _a, _b, _c, F1,  2,
-      WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 16,
-      W4, W5, W6, W7, W0, _, _, _ );
-  _R( _c, _d, _e, _a, _b, F1,  3,
-      WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,16,
-      W4, W5, W6, W7, W0, _, _, _ );
-
-#undef curK
-#define curK qK2
-  _R( _b, _c, _d, _e, _a, F1,  4,
-      WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 20,
-      W3, W4, W5, W6, W7, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F1,  5,
-      WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 20,
-      W3, W4, W5, W6, W7, _, _, _ );
-  _R( _e, _a, _b, _c, _d, F1,  6,
-      WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 20,
-      W3, W4, W5, W6, W7, _, _, _ );
-  _R( _d, _e, _a, _b, _c, F1,  7,
-      WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,20,
-      W3, W4, W5, W6, W7, _, _, _ );
-
-  _R( _c, _d, _e, _a, _b, F1,  8,
-      WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 24,
-      W2, W3, W4, W5, W6, _, _, _ );
-  _R( _b, _c, _d, _e, _a, F1,  9,
-      WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 24,
-      W2, W3, W4, W5, W6, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F1, 10,
-      WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 24,
-      W2, W3, W4, W5, W6, _, _, _ );
-  _R( _e, _a, _b, _c, _d, F1, 11,
-      WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,24,
-      W2, W3, W4, W5, W6, _, _, _ );
-
-  _R( _d, _e, _a, _b, _c, F1, 12,
-      WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 28,
-      W1, W2, W3, W4, W5, _, _, _ );
-  _R( _c, _d, _e, _a, _b, F1, 13,
-      WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 28,
-      W1, W2, W3, W4, W5, _, _, _ );
-  _R( _b, _c, _d, _e, _a, F1, 14,
-      WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 28,
-      W1, W2, W3, W4, W5, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F1, 15,
-      WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,28,
-      W1, W2, W3, W4, W5, _, _, _ );
-
-  /* Transform 16-63 + Precalc 32-79. */
-  _R( _e, _a, _b, _c, _d, F1, 16,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 32,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _d, _e, _a, _b, _c, F1, 17,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 32,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _c, _d, _e, _a, _b, F1, 18,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 32,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _b, _c, _d, _e, _a, F1, 19,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 32,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-
-  _R( _a, _b, _c, _d, _e, F2, 20,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 36,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _e, _a, _b, _c, _d, F2, 21,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 36,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _d, _e, _a, _b, _c, F2, 22,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 36,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _c, _d, _e, _a, _b, F2, 23,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 36,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-
-#undef curK
-#define curK qK3
-  _R( _b, _c, _d, _e, _a, F2, 24,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 40,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _a, _b, _c, _d, _e, F2, 25,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 40,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _e, _a, _b, _c, _d, F2, 26,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 40,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _d, _e, _a, _b, _c, F2, 27,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 40,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-
-  _R( _c, _d, _e, _a, _b, F2, 28,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 44,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _b, _c, _d, _e, _a, F2, 29,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 44,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _a, _b, _c, _d, _e, F2, 30,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 44,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _e, _a, _b, _c, _d, F2, 31,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 44,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-
-  _R( _d, _e, _a, _b, _c, F2, 32,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 48,
-      W4, W5, W6, W7, W0, W1, W2, W3);
-  _R( _c, _d, _e, _a, _b, F2, 33,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 48,
-      W4, W5, W6, W7, W0, W1, W2, W3);
-  _R( _b, _c, _d, _e, _a, F2, 34,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 48,
-      W4, W5, W6, W7, W0, W1, W2, W3);
-  _R( _a, _b, _c, _d, _e, F2, 35,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 48,
-      W4, W5, W6, W7, W0, W1, W2, W3);
-
-  _R( _e, _a, _b, _c, _d, F2, 36,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 52,
-      W3, W4, W5, W6, W7, W0, W1, W2);
-  _R( _d, _e, _a, _b, _c, F2, 37,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 52,
-      W3, W4, W5, W6, W7, W0, W1, W2);
-  _R( _c, _d, _e, _a, _b, F2, 38,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 52,
-      W3, W4, W5, W6, W7, W0, W1, W2);
-  _R( _b, _c, _d, _e, _a, F2, 39,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 52,
-      W3, W4, W5, W6, W7, W0, W1, W2);
-
-  _R( _a, _b, _c, _d, _e, F3, 40,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 56,
-      W2, W3, W4, W5, W6, W7, W0, W1);
-  _R( _e, _a, _b, _c, _d, F3, 41,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 56,
-      W2, W3, W4, W5, W6, W7, W0, W1);
-  _R( _d, _e, _a, _b, _c, F3, 42,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 56,
-      W2, W3, W4, W5, W6, W7, W0, W1);
-  _R( _c, _d, _e, _a, _b, F3, 43,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 56,
-      W2, W3, W4, W5, W6, W7, W0, W1);
-
-#undef curK
-#define curK qK4
-  _R( _b, _c, _d, _e, _a, F3, 44,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 60,
-      W1, W2, W3, W4, W5, W6, W7, W0);
-  _R( _a, _b, _c, _d, _e, F3, 45,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 60,
-      W1, W2, W3, W4, W5, W6, W7, W0);
-  _R( _e, _a, _b, _c, _d, F3, 46,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 60,
-      W1, W2, W3, W4, W5, W6, W7, W0);
-  _R( _d, _e, _a, _b, _c, F3, 47,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 60,
-      W1, W2, W3, W4, W5, W6, W7, W0);
-
-  _R( _c, _d, _e, _a, _b, F3, 48,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 64,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _b, _c, _d, _e, _a, F3, 49,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 64,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _a, _b, _c, _d, _e, F3, 50,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 64,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-  _R( _e, _a, _b, _c, _d, F3, 51,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 64,
-      W0, W1, W2, W3, W4, W5, W6, W7);
-
-  _R( _d, _e, _a, _b, _c, F3, 52,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 68,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _c, _d, _e, _a, _b, F3, 53,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 68,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _b, _c, _d, _e, _a, F3, 54,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 68,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-  _R( _a, _b, _c, _d, _e, F3, 55,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 68,
-      W7, W0, W1, W2, W3, W4, W5, W6);
-
-  _R( _e, _a, _b, _c, _d, F3, 56,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 72,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _d, _e, _a, _b, _c, F3, 57,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 72,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _c, _d, _e, _a, _b, F3, 58,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 72,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-  _R( _b, _c, _d, _e, _a, F3, 59,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 72,
-      W6, W7, W0, W1, W2, W3, W4, W5);
-
-  subs RNBLKS, #1;
-
-  _R( _a, _b, _c, _d, _e, F4, 60,
-      WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 76,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _e, _a, _b, _c, _d, F4, 61,
-      WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 76,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _d, _e, _a, _b, _c, F4, 62,
-      WPRECALC_32_79_6, dummy,            WPRECALC_32_79_7, 76,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-  _R( _c, _d, _e, _a, _b, F4, 63,
-      WPRECALC_32_79_8, dummy,            WPRECALC_32_79_9, 76,
-      W5, W6, W7, W0, W1, W2, W3, W4);
-
-  beq .Lend;
-
-  /* Transform 64-79 + Precalc 0-15 of next block. */
-#undef curK
-#define curK qK1
-  _R( _b, _c, _d, _e, _a, F4, 64,
-      WPRECALC_00_15_0, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F4, 65,
-      WPRECALC_00_15_1, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _e, _a, _b, _c, _d, F4, 66,
-      WPRECALC_00_15_2, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _d, _e, _a, _b, _c, F4, 67,
-      WPRECALC_00_15_3, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-
-  _R( _c, _d, _e, _a, _b, F4, 68,
-      dummy,            dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _b, _c, _d, _e, _a, F4, 69,
-      dummy,            dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F4, 70,
-      WPRECALC_00_15_4, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _e, _a, _b, _c, _d, F4, 71,
-      WPRECALC_00_15_5, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-
-  _R( _d, _e, _a, _b, _c, F4, 72,
-      dummy,            dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _c, _d, _e, _a, _b, F4, 73,
-      dummy,            dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _b, _c, _d, _e, _a, F4, 74,
-      WPRECALC_00_15_6, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _a, _b, _c, _d, _e, F4, 75,
-      WPRECALC_00_15_7, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-
-  _R( _e, _a, _b, _c, _d, F4, 76,
-      WPRECALC_00_15_8, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _d, _e, _a, _b, _c, F4, 77,
-      WPRECALC_00_15_9, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _c, _d, _e, _a, _b, F4, 78,
-      WPRECALC_00_15_10, dummy, dummy, _, _, _, _, _, _, _, _, _ );
-  _R( _b, _c, _d, _e, _a, F4, 79,
-      WPRECALC_00_15_11, dummy, WPRECALC_00_15_12, _, _, _, _, _, _, _, _, _ );
-
-  /* Update the chaining variables. */
-  ldm RSTATE, {RT0-RT3};
-  add _a, RT0;
-  ldr RT0, [RSTATE, #state_h4];
-  add _b, RT1;
-  add _c, RT2;
-  add _d, RT3;
-  add _e, RT0;
-  stm RSTATE, {_a-_e};
-
-  b .Loop;
-
-.Lend:
-  /* Transform 64-79 */
-  R( _b, _c, _d, _e, _a, F4, 64 );
-  R( _a, _b, _c, _d, _e, F4, 65 );
-  R( _e, _a, _b, _c, _d, F4, 66 );
-  R( _d, _e, _a, _b, _c, F4, 67 );
-  R( _c, _d, _e, _a, _b, F4, 68 );
-  R( _b, _c, _d, _e, _a, F4, 69 );
-  R( _a, _b, _c, _d, _e, F4, 70 );
-  R( _e, _a, _b, _c, _d, F4, 71 );
-  R( _d, _e, _a, _b, _c, F4, 72 );
-  R( _c, _d, _e, _a, _b, F4, 73 );
-  R( _b, _c, _d, _e, _a, F4, 74 );
-  R( _a, _b, _c, _d, _e, F4, 75 );
-  R( _e, _a, _b, _c, _d, F4, 76 );
-  R( _d, _e, _a, _b, _c, F4, 77 );
-  R( _c, _d, _e, _a, _b, F4, 78 );
-  R( _b, _c, _d, _e, _a, F4, 79 );
-
-  mov sp, ROLDSTACK;
-
-  /* Update the chaining variables. */
-  ldm RSTATE, {RT0-RT3};
-  add _a, RT0;
-  ldr RT0, [RSTATE, #state_h4];
-  add _b, RT1;
-  add _c, RT2;
-  add _d, RT3;
-  /*vpop {q4-q7};*/
-  add _e, RT0;
-  stm RSTATE, {_a-_e};
-
-  pop {r4-r12, pc};
-
-.Ldo_nothing:
-  bx lr
-ENDPROC(sha1_transform_neon)
diff --git a/arch/arm/crypto/sha1-ce-core.S b/arch/arm/crypto/sha1-ce-core.S
deleted file mode 100644
index 8a702e051738..000000000000
--- a/arch/arm/crypto/sha1-ce-core.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * sha1-ce-core.S - SHA-1 secure hash using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2015 Linaro Ltd.
- * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.arch		armv8-a
-	.fpu		crypto-neon-fp-armv8
-
-	k0		.req	q0
-	k1		.req	q1
-	k2		.req	q2
-	k3		.req	q3
-
-	ta0		.req	q4
-	ta1		.req	q5
-	tb0		.req	q5
-	tb1		.req	q4
-
-	dga		.req	q6
-	dgb		.req	q7
-	dgbs		.req	s28
-
-	dg0		.req	q12
-	dg1a0		.req	q13
-	dg1a1		.req	q14
-	dg1b0		.req	q14
-	dg1b1		.req	q13
-
-	.macro		add_only, op, ev, rc, s0, dg1
-	.ifnb		\s0
-	vadd.u32	tb\ev, q\s0, \rc
-	.endif
-	sha1h.32	dg1b\ev, dg0
-	.ifb		\dg1
-	sha1\op\().32	dg0, dg1a\ev, ta\ev
-	.else
-	sha1\op\().32	dg0, \dg1, ta\ev
-	.endif
-	.endm
-
-	.macro		add_update, op, ev, rc, s0, s1, s2, s3, dg1
-	sha1su0.32	q\s0, q\s1, q\s2
-	add_only	\op, \ev, \rc, \s1, \dg1
-	sha1su1.32	q\s0, q\s3
-	.endm
-
-	.align		6
-.Lsha1_rcon:
-	.word		0x5a827999, 0x5a827999, 0x5a827999, 0x5a827999
-	.word		0x6ed9eba1, 0x6ed9eba1, 0x6ed9eba1, 0x6ed9eba1
-	.word		0x8f1bbcdc, 0x8f1bbcdc, 0x8f1bbcdc, 0x8f1bbcdc
-	.word		0xca62c1d6, 0xca62c1d6, 0xca62c1d6, 0xca62c1d6
-
-	/*
-	 * void sha1_ce_transform(struct sha1_state *sst, u8 const *src,
-	 *			  int blocks);
-	 */
-ENTRY(sha1_ce_transform)
-	/* load round constants */
-	adr		ip, .Lsha1_rcon
-	vld1.32		{k0-k1}, [ip, :128]!
-	vld1.32		{k2-k3}, [ip, :128]
-
-	/* load state */
-	vld1.32		{dga}, [r0]
-	vldr		dgbs, [r0, #16]
-
-	/* load input */
-0:	vld1.32		{q8-q9}, [r1]!
-	vld1.32		{q10-q11}, [r1]!
-	subs		r2, r2, #1
-
-#ifndef CONFIG_CPU_BIG_ENDIAN
-	vrev32.8	q8, q8
-	vrev32.8	q9, q9
-	vrev32.8	q10, q10
-	vrev32.8	q11, q11
-#endif
-
-	vadd.u32	ta0, q8, k0
-	vmov		dg0, dga
-
-	add_update	c, 0, k0,  8,  9, 10, 11, dgb
-	add_update	c, 1, k0,  9, 10, 11,  8
-	add_update	c, 0, k0, 10, 11,  8,  9
-	add_update	c, 1, k0, 11,  8,  9, 10
-	add_update	c, 0, k1,  8,  9, 10, 11
-
-	add_update	p, 1, k1,  9, 10, 11,  8
-	add_update	p, 0, k1, 10, 11,  8,  9
-	add_update	p, 1, k1, 11,  8,  9, 10
-	add_update	p, 0, k1,  8,  9, 10, 11
-	add_update	p, 1, k2,  9, 10, 11,  8
-
-	add_update	m, 0, k2, 10, 11,  8,  9
-	add_update	m, 1, k2, 11,  8,  9, 10
-	add_update	m, 0, k2,  8,  9, 10, 11
-	add_update	m, 1, k2,  9, 10, 11,  8
-	add_update	m, 0, k3, 10, 11,  8,  9
-
-	add_update	p, 1, k3, 11,  8,  9, 10
-	add_only	p, 0, k3,  9
-	add_only	p, 1, k3, 10
-	add_only	p, 0, k3, 11
-	add_only	p, 1
-
-	/* update state */
-	vadd.u32	dga, dga, dg0
-	vadd.u32	dgb, dgb, dg1a0
-	bne		0b
-
-	/* store new state */
-	vst1.32		{dga}, [r0]
-	vstr		dgbs, [r0, #16]
-	bx		lr
-ENDPROC(sha1_ce_transform)
diff --git a/arch/arm/crypto/sha1-ce-glue.c b/arch/arm/crypto/sha1-ce-glue.c
deleted file mode 100644
index de9100c67b37..000000000000
--- a/arch/arm/crypto/sha1-ce-glue.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha1-ce-glue.c - SHA-1 secure hash using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha1.h>
-#include <crypto/sha1_base.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#include "sha1.h"
-
-MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-
-asmlinkage void sha1_ce_transform(struct sha1_state *sst, u8 const *src,
-				  int blocks);
-
-static int sha1_ce_update(struct shash_desc *desc, const u8 *data,
-			  unsigned int len)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE)
-		return sha1_update_arm(desc, data, len);
-
-	kernel_neon_begin();
-	sha1_base_do_update(desc, data, len, sha1_ce_transform);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int sha1_ce_finup(struct shash_desc *desc, const u8 *data,
-			 unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return sha1_finup_arm(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha1_base_do_update(desc, data, len, sha1_ce_transform);
-	sha1_base_do_finalize(desc, sha1_ce_transform);
-	kernel_neon_end();
-
-	return sha1_base_finish(desc, out);
-}
-
-static int sha1_ce_final(struct shash_desc *desc, u8 *out)
-{
-	return sha1_ce_finup(desc, NULL, 0, out);
-}
-
-static struct shash_alg alg = {
-	.init			= sha1_base_init,
-	.update			= sha1_ce_update,
-	.final			= sha1_ce_final,
-	.finup			= sha1_ce_finup,
-	.descsize		= sizeof(struct sha1_state),
-	.digestsize		= SHA1_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha1",
-		.cra_driver_name	= "sha1-ce",
-		.cra_priority		= 200,
-		.cra_blocksize		= SHA1_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-};
-
-static int __init sha1_ce_mod_init(void)
-{
-	return crypto_register_shash(&alg);
-}
-
-static void __exit sha1_ce_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-module_cpu_feature_match(SHA1, sha1_ce_mod_init);
-module_exit(sha1_ce_mod_fini);
diff --git a/arch/arm/crypto/sha1.h b/arch/arm/crypto/sha1.h
deleted file mode 100644
index b1b7e21da2c3..000000000000
--- a/arch/arm/crypto/sha1.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASM_ARM_CRYPTO_SHA1_H
-#define ASM_ARM_CRYPTO_SHA1_H
-
-#include <linux/crypto.h>
-#include <crypto/sha1.h>
-
-extern int sha1_update_arm(struct shash_desc *desc, const u8 *data,
-			   unsigned int len);
-
-extern int sha1_finup_arm(struct shash_desc *desc, const u8 *data,
-			   unsigned int len, u8 *out);
-
-#endif
diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c
deleted file mode 100644
index 95a727bcd664..000000000000
--- a/arch/arm/crypto/sha1_glue.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cryptographic API.
- * Glue code for the SHA1 Secure Hash Algorithm assembler implementation
- *
- * This file is based on sha1_generic.c and sha1_ssse3_glue.c
- *
- * Copyright (c) Alan Smithee.
- * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
- * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
- * Copyright (c) Mathias Krause <minipli@googlemail.com>
- */
-
-#include <crypto/internal/hash.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <crypto/sha1.h>
-#include <crypto/sha1_base.h>
-#include <asm/byteorder.h>
-
-#include "sha1.h"
-
-asmlinkage void sha1_block_data_order(struct sha1_state *digest,
-		const u8 *data, int rounds);
-
-int sha1_update_arm(struct shash_desc *desc, const u8 *data,
-		    unsigned int len)
-{
-	/* make sure signature matches sha1_block_fn() */
-	BUILD_BUG_ON(offsetof(struct sha1_state, state) != 0);
-
-	return sha1_base_do_update(desc, data, len, sha1_block_data_order);
-}
-EXPORT_SYMBOL_GPL(sha1_update_arm);
-
-static int sha1_final(struct shash_desc *desc, u8 *out)
-{
-	sha1_base_do_finalize(desc, sha1_block_data_order);
-	return sha1_base_finish(desc, out);
-}
-
-int sha1_finup_arm(struct shash_desc *desc, const u8 *data,
-		   unsigned int len, u8 *out)
-{
-	sha1_base_do_update(desc, data, len, sha1_block_data_order);
-	return sha1_final(desc, out);
-}
-EXPORT_SYMBOL_GPL(sha1_finup_arm);
-
-static struct shash_alg alg = {
-	.digestsize	=	SHA1_DIGEST_SIZE,
-	.init		=	sha1_base_init,
-	.update		=	sha1_update_arm,
-	.final		=	sha1_final,
-	.finup		=	sha1_finup_arm,
-	.descsize	=	sizeof(struct sha1_state),
-	.base		=	{
-		.cra_name	=	"sha1",
-		.cra_driver_name=	"sha1-asm",
-		.cra_priority	=	150,
-		.cra_blocksize	=	SHA1_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-};
-
-
-static int __init sha1_mod_init(void)
-{
-	return crypto_register_shash(&alg);
-}
-
-
-static void __exit sha1_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-
-module_init(sha1_mod_init);
-module_exit(sha1_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm (ARM)");
-MODULE_ALIAS_CRYPTO("sha1");
-MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
diff --git a/arch/arm/crypto/sha1_neon_glue.c b/arch/arm/crypto/sha1_neon_glue.c
deleted file mode 100644
index 9c70b87e69f7..000000000000
--- a/arch/arm/crypto/sha1_neon_glue.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Glue code for the SHA1 Secure Hash Algorithm assembler implementation using
- * ARM NEON instructions.
- *
- * Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi>
- *
- * This file is based on sha1_generic.c and sha1_ssse3_glue.c:
- *  Copyright (c) Alan Smithee.
- *  Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
- *  Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
- *  Copyright (c) Mathias Krause <minipli@googlemail.com>
- *  Copyright (c) Chandramouli Narayanan <mouli@linux.intel.com>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
-#include <crypto/sha1.h>
-#include <crypto/sha1_base.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#include "sha1.h"
-
-asmlinkage void sha1_transform_neon(struct sha1_state *state_h,
-				    const u8 *data, int rounds);
-
-static int sha1_neon_update(struct shash_desc *desc, const u8 *data,
-			  unsigned int len)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE)
-		return sha1_update_arm(desc, data, len);
-
-	kernel_neon_begin();
-	sha1_base_do_update(desc, data, len, sha1_transform_neon);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int sha1_neon_finup(struct shash_desc *desc, const u8 *data,
-			   unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return sha1_finup_arm(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha1_base_do_update(desc, data, len, sha1_transform_neon);
-	sha1_base_do_finalize(desc, sha1_transform_neon);
-	kernel_neon_end();
-
-	return sha1_base_finish(desc, out);
-}
-
-static int sha1_neon_final(struct shash_desc *desc, u8 *out)
-{
-	return sha1_neon_finup(desc, NULL, 0, out);
-}
-
-static struct shash_alg alg = {
-	.digestsize	=	SHA1_DIGEST_SIZE,
-	.init		=	sha1_base_init,
-	.update		=	sha1_neon_update,
-	.final		=	sha1_neon_final,
-	.finup		=	sha1_neon_finup,
-	.descsize	=	sizeof(struct sha1_state),
-	.base		=	{
-		.cra_name		= "sha1",
-		.cra_driver_name	= "sha1-neon",
-		.cra_priority		= 250,
-		.cra_blocksize		= SHA1_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-};
-
-static int __init sha1_neon_mod_init(void)
-{
-	if (!cpu_has_neon())
-		return -ENODEV;
-
-	return crypto_register_shash(&alg);
-}
-
-static void __exit sha1_neon_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-module_init(sha1_neon_mod_init);
-module_exit(sha1_neon_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, NEON accelerated");
-MODULE_ALIAS_CRYPTO("sha1");
diff --git a/arch/arm/crypto/sha2-ce-core.S b/arch/arm/crypto/sha2-ce-core.S
deleted file mode 100644
index b6369d2440a1..000000000000
--- a/arch/arm/crypto/sha2-ce-core.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * sha2-ce-core.S - SHA-224/256 secure hash using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2015 Linaro Ltd.
- * Author: Ard Biesheuvel <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.arch		armv8-a
-	.fpu		crypto-neon-fp-armv8
-
-	k0		.req	q7
-	k1		.req	q8
-	rk		.req	r3
-
-	ta0		.req	q9
-	ta1		.req	q10
-	tb0		.req	q10
-	tb1		.req	q9
-
-	dga		.req	q11
-	dgb		.req	q12
-
-	dg0		.req	q13
-	dg1		.req	q14
-	dg2		.req	q15
-
-	.macro		add_only, ev, s0
-	vmov		dg2, dg0
-	.ifnb		\s0
-	vld1.32		{k\ev}, [rk, :128]!
-	.endif
-	sha256h.32	dg0, dg1, tb\ev
-	sha256h2.32	dg1, dg2, tb\ev
-	.ifnb		\s0
-	vadd.u32	ta\ev, q\s0, k\ev
-	.endif
-	.endm
-
-	.macro		add_update, ev, s0, s1, s2, s3
-	sha256su0.32	q\s0, q\s1
-	add_only	\ev, \s1
-	sha256su1.32	q\s0, q\s2, q\s3
-	.endm
-
-	.align		6
-.Lsha256_rcon:
-	.word		0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5
-	.word		0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5
-	.word		0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3
-	.word		0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174
-	.word		0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc
-	.word		0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da
-	.word		0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7
-	.word		0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967
-	.word		0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13
-	.word		0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85
-	.word		0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3
-	.word		0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070
-	.word		0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5
-	.word		0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3
-	.word		0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208
-	.word		0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
-
-	/*
-	 * void sha2_ce_transform(struct sha256_state *sst, u8 const *src,
-				  int blocks);
-	 */
-ENTRY(sha2_ce_transform)
-	/* load state */
-	vld1.32		{dga-dgb}, [r0]
-
-	/* load input */
-0:	vld1.32		{q0-q1}, [r1]!
-	vld1.32		{q2-q3}, [r1]!
-	subs		r2, r2, #1
-
-#ifndef CONFIG_CPU_BIG_ENDIAN
-	vrev32.8	q0, q0
-	vrev32.8	q1, q1
-	vrev32.8	q2, q2
-	vrev32.8	q3, q3
-#endif
-
-	/* load first round constant */
-	adr		rk, .Lsha256_rcon
-	vld1.32		{k0}, [rk, :128]!
-
-	vadd.u32	ta0, q0, k0
-	vmov		dg0, dga
-	vmov		dg1, dgb
-
-	add_update	1, 0, 1, 2, 3
-	add_update	0, 1, 2, 3, 0
-	add_update	1, 2, 3, 0, 1
-	add_update	0, 3, 0, 1, 2
-	add_update	1, 0, 1, 2, 3
-	add_update	0, 1, 2, 3, 0
-	add_update	1, 2, 3, 0, 1
-	add_update	0, 3, 0, 1, 2
-	add_update	1, 0, 1, 2, 3
-	add_update	0, 1, 2, 3, 0
-	add_update	1, 2, 3, 0, 1
-	add_update	0, 3, 0, 1, 2
-
-	add_only	1, 1
-	add_only	0, 2
-	add_only	1, 3
-	add_only	0
-
-	/* update state */
-	vadd.u32	dga, dga, dg0
-	vadd.u32	dgb, dgb, dg1
-	bne		0b
-
-	/* store new state */
-	vst1.32		{dga-dgb}, [r0]
-	bx		lr
-ENDPROC(sha2_ce_transform)
diff --git a/arch/arm/crypto/sha2-ce-glue.c b/arch/arm/crypto/sha2-ce-glue.c
deleted file mode 100644
index aeac45bfbf9f..000000000000
--- a/arch/arm/crypto/sha2-ce-glue.c
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha2-ce-glue.c - SHA-224/SHA-256 using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-#include <asm/hwcap.h>
-#include <asm/simd.h>
-#include <asm/neon.h>
-#include <linux/unaligned.h>
-
-#include "sha256_glue.h"
-
-MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-
-asmlinkage void sha2_ce_transform(struct sha256_state *sst, u8 const *src,
-				  int blocks);
-
-static int sha2_ce_update(struct shash_desc *desc, const u8 *data,
-			  unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE)
-		return crypto_sha256_arm_update(desc, data, len);
-
-	kernel_neon_begin();
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha2_ce_transform);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int sha2_ce_finup(struct shash_desc *desc, const u8 *data,
-			 unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return crypto_sha256_arm_finup(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha256_base_do_update(desc, data, len,
-				      (sha256_block_fn *)sha2_ce_transform);
-	sha256_base_do_finalize(desc, (sha256_block_fn *)sha2_ce_transform);
-	kernel_neon_end();
-
-	return sha256_base_finish(desc, out);
-}
-
-static int sha2_ce_final(struct shash_desc *desc, u8 *out)
-{
-	return sha2_ce_finup(desc, NULL, 0, out);
-}
-
-static struct shash_alg algs[] = { {
-	.init			= sha224_base_init,
-	.update			= sha2_ce_update,
-	.final			= sha2_ce_final,
-	.finup			= sha2_ce_finup,
-	.descsize		= sizeof(struct sha256_state),
-	.digestsize		= SHA224_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha224",
-		.cra_driver_name	= "sha224-ce",
-		.cra_priority		= 300,
-		.cra_blocksize		= SHA256_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-}, {
-	.init			= sha256_base_init,
-	.update			= sha2_ce_update,
-	.final			= sha2_ce_final,
-	.finup			= sha2_ce_finup,
-	.descsize		= sizeof(struct sha256_state),
-	.digestsize		= SHA256_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha256",
-		.cra_driver_name	= "sha256-ce",
-		.cra_priority		= 300,
-		.cra_blocksize		= SHA256_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-} };
-
-static int __init sha2_ce_mod_init(void)
-{
-	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
-}
-
-static void __exit sha2_ce_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_cpu_feature_match(SHA2, sha2_ce_mod_init);
-module_exit(sha2_ce_mod_fini);
diff --git a/arch/arm/crypto/sha256-armv4.pl b/arch/arm/crypto/sha256-armv4.pl
deleted file mode 100644
index f3a2b54efd4e..000000000000
--- a/arch/arm/crypto/sha256-armv4.pl
+++ /dev/null
@@ -1,724 +0,0 @@
-#!/usr/bin/env perl
-# SPDX-License-Identifier: GPL-2.0
-
-# This code is taken from the OpenSSL project but the author (Andy Polyakov)
-# has relicensed it under the GPLv2. Therefore this program is free software;
-# you can redistribute it and/or modify it under the terms of the GNU General
-# Public License version 2 as published by the Free Software Foundation.
-#
-# The original headers, including the original license headers, are
-# included below for completeness.
-
-# ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see https://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# SHA256 block procedure for ARMv4. May 2007.
-
-# Performance is ~2x better than gcc 3.4 generated code and in "abso-
-# lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per
-# byte [on single-issue Xscale PXA250 core].
-
-# July 2010.
-#
-# Rescheduling for dual-issue pipeline resulted in 22% improvement on
-# Cortex A8 core and ~20 cycles per processed byte.
-
-# February 2011.
-#
-# Profiler-assisted and platform-specific optimization resulted in 16%
-# improvement on Cortex A8 core and ~15.4 cycles per processed byte.
-
-# September 2013.
-#
-# Add NEON implementation. On Cortex A8 it was measured to process one
-# byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon
-# S4 does it in 12.5 cycles too, but it's 50% faster than integer-only
-# code (meaning that latter performs sub-optimally, nothing was done
-# about it).
-
-# May 2014.
-#
-# Add ARMv8 code path performing at 2.0 cpb on Apple A7.
-
-while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
-
-$ctx="r0";	$t0="r0";
-$inp="r1";	$t4="r1";
-$len="r2";	$t1="r2";
-$T1="r3";	$t3="r3";
-$A="r4";
-$B="r5";
-$C="r6";
-$D="r7";
-$E="r8";
-$F="r9";
-$G="r10";
-$H="r11";
-@V=($A,$B,$C,$D,$E,$F,$G,$H);
-$t2="r12";
-$Ktbl="r14";
-
-@Sigma0=( 2,13,22);
-@Sigma1=( 6,11,25);
-@sigma0=( 7,18, 3);
-@sigma1=(17,19,10);
-
-sub BODY_00_15 {
-my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
-
-$code.=<<___ if ($i<16);
-#if __ARM_ARCH__>=7
-	@ ldr	$t1,[$inp],#4			@ $i
-# if $i==15
-	str	$inp,[sp,#17*4]			@ make room for $t4
-# endif
-	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
-	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
-	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	$t1,$t1
-# endif
-#else
-	@ ldrb	$t1,[$inp,#3]			@ $i
-	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
-	ldrb	$t2,[$inp,#2]
-	ldrb	$t0,[$inp,#1]
-	orr	$t1,$t1,$t2,lsl#8
-	ldrb	$t2,[$inp],#4
-	orr	$t1,$t1,$t0,lsl#16
-# if $i==15
-	str	$inp,[sp,#17*4]			@ make room for $t4
-# endif
-	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
-	orr	$t1,$t1,$t2,lsl#24
-	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
-#endif
-___
-$code.=<<___;
-	ldr	$t2,[$Ktbl],#4			@ *K256++
-	add	$h,$h,$t1			@ h+=X[i]
-	str	$t1,[sp,#`$i%16`*4]
-	eor	$t1,$f,$g
-	add	$h,$h,$t0,ror#$Sigma1[0]	@ h+=Sigma1(e)
-	and	$t1,$t1,$e
-	add	$h,$h,$t2			@ h+=K256[i]
-	eor	$t1,$t1,$g			@ Ch(e,f,g)
-	eor	$t0,$a,$a,ror#`$Sigma0[1]-$Sigma0[0]`
-	add	$h,$h,$t1			@ h+=Ch(e,f,g)
-#if $i==31
-	and	$t2,$t2,#0xff
-	cmp	$t2,#0xf2			@ done?
-#endif
-#if $i<15
-# if __ARM_ARCH__>=7
-	ldr	$t1,[$inp],#4			@ prefetch
-# else
-	ldrb	$t1,[$inp,#3]
-# endif
-	eor	$t2,$a,$b			@ a^b, b^c in next round
-#else
-	ldr	$t1,[sp,#`($i+2)%16`*4]		@ from future BODY_16_xx
-	eor	$t2,$a,$b			@ a^b, b^c in next round
-	ldr	$t4,[sp,#`($i+15)%16`*4]	@ from future BODY_16_xx
-#endif
-	eor	$t0,$t0,$a,ror#`$Sigma0[2]-$Sigma0[0]`	@ Sigma0(a)
-	and	$t3,$t3,$t2			@ (b^c)&=(a^b)
-	add	$d,$d,$h			@ d+=h
-	eor	$t3,$t3,$b			@ Maj(a,b,c)
-	add	$h,$h,$t0,ror#$Sigma0[0]	@ h+=Sigma0(a)
-	@ add	$h,$h,$t3			@ h+=Maj(a,b,c)
-___
-	($t2,$t3)=($t3,$t2);
-}
-
-sub BODY_16_XX {
-my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
-
-$code.=<<___;
-	@ ldr	$t1,[sp,#`($i+1)%16`*4]		@ $i
-	@ ldr	$t4,[sp,#`($i+14)%16`*4]
-	mov	$t0,$t1,ror#$sigma0[0]
-	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
-	mov	$t2,$t4,ror#$sigma1[0]
-	eor	$t0,$t0,$t1,ror#$sigma0[1]
-	eor	$t2,$t2,$t4,ror#$sigma1[1]
-	eor	$t0,$t0,$t1,lsr#$sigma0[2]	@ sigma0(X[i+1])
-	ldr	$t1,[sp,#`($i+0)%16`*4]
-	eor	$t2,$t2,$t4,lsr#$sigma1[2]	@ sigma1(X[i+14])
-	ldr	$t4,[sp,#`($i+9)%16`*4]
-
-	add	$t2,$t2,$t0
-	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`	@ from BODY_00_15
-	add	$t1,$t1,$t2
-	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
-	add	$t1,$t1,$t4			@ X[i]
-___
-	&BODY_00_15(@_);
-}
-
-$code=<<___;
-#ifndef __KERNEL__
-# include "arm_arch.h"
-#else
-# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-# define __ARM_MAX_ARCH__ 7
-#endif
-
-.text
-#if __ARM_ARCH__<7
-.code	32
-#else
-.syntax unified
-# ifdef __thumb2__
-.thumb
-# else
-.code   32
-# endif
-#endif
-
-.type	K256,%object
-.align	5
-K256:
-.word	0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
-.word	0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
-.word	0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
-.word	0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
-.word	0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
-.word	0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
-.word	0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
-.word	0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
-.word	0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
-.word	0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
-.word	0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
-.word	0xd192e819,0xd6990624,0xf40e3585,0x106aa070
-.word	0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
-.word	0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
-.word	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
-.word	0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
-.size	K256,.-K256
-.word	0				@ terminator
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.LOPENSSL_armcap:
-.word	OPENSSL_armcap_P-sha256_block_data_order
-#endif
-.align	5
-
-.global	sha256_block_data_order
-.type	sha256_block_data_order,%function
-sha256_block_data_order:
-.Lsha256_block_data_order:
-#if __ARM_ARCH__<7
-	sub	r3,pc,#8		@ sha256_block_data_order
-#else
-	adr	r3,.Lsha256_block_data_order
-#endif
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	ldr	r12,.LOPENSSL_armcap
-	ldr	r12,[r3,r12]		@ OPENSSL_armcap_P
-	tst	r12,#ARMV8_SHA256
-	bne	.LARMv8
-	tst	r12,#ARMV7_NEON
-	bne	.LNEON
-#endif
-	add	$len,$inp,$len,lsl#6	@ len to point at the end of inp
-	stmdb	sp!,{$ctx,$inp,$len,r4-r11,lr}
-	ldmia	$ctx,{$A,$B,$C,$D,$E,$F,$G,$H}
-	sub	$Ktbl,r3,#256+32	@ K256
-	sub	sp,sp,#16*4		@ alloca(X[16])
-.Loop:
-# if __ARM_ARCH__>=7
-	ldr	$t1,[$inp],#4
-# else
-	ldrb	$t1,[$inp,#3]
-# endif
-	eor	$t3,$B,$C		@ magic
-	eor	$t2,$t2,$t2
-___
-for($i=0;$i<16;$i++)	{ &BODY_00_15($i,@V); unshift(@V,pop(@V)); }
-$code.=".Lrounds_16_xx:\n";
-for (;$i<32;$i++)	{ &BODY_16_XX($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-#if __ARM_ARCH__>=7
-	ite	eq			@ Thumb2 thing, sanity check in ARM
-#endif
-	ldreq	$t3,[sp,#16*4]		@ pull ctx
-	bne	.Lrounds_16_xx
-
-	add	$A,$A,$t2		@ h+=Maj(a,b,c) from the past
-	ldr	$t0,[$t3,#0]
-	ldr	$t1,[$t3,#4]
-	ldr	$t2,[$t3,#8]
-	add	$A,$A,$t0
-	ldr	$t0,[$t3,#12]
-	add	$B,$B,$t1
-	ldr	$t1,[$t3,#16]
-	add	$C,$C,$t2
-	ldr	$t2,[$t3,#20]
-	add	$D,$D,$t0
-	ldr	$t0,[$t3,#24]
-	add	$E,$E,$t1
-	ldr	$t1,[$t3,#28]
-	add	$F,$F,$t2
-	ldr	$inp,[sp,#17*4]		@ pull inp
-	ldr	$t2,[sp,#18*4]		@ pull inp+len
-	add	$G,$G,$t0
-	add	$H,$H,$t1
-	stmia	$t3,{$A,$B,$C,$D,$E,$F,$G,$H}
-	cmp	$inp,$t2
-	sub	$Ktbl,$Ktbl,#256	@ rewind Ktbl
-	bne	.Loop
-
-	add	sp,sp,#`16+3`*4	@ destroy frame
-#if __ARM_ARCH__>=5
-	ldmia	sp!,{r4-r11,pc}
-#else
-	ldmia	sp!,{r4-r11,lr}
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	sha256_block_data_order,.-sha256_block_data_order
-___
-######################################################################
-# NEON stuff
-#
-{{{
-my @X=map("q$_",(0..3));
-my ($T0,$T1,$T2,$T3,$T4,$T5)=("q8","q9","q10","q11","d24","d25");
-my $Xfer=$t4;
-my $j=0;
-
-sub Dlo()   { shift=~m|q([1]?[0-9])|?"d".($1*2):"";     }
-sub Dhi()   { shift=~m|q([1]?[0-9])|?"d".($1*2+1):"";   }
-
-sub AUTOLOAD()          # thunk [simplified] x86-style perlasm
-{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
-  my $arg = pop;
-    $arg = "#$arg" if ($arg*1 eq $arg);
-    $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
-}
-
-sub Xupdate()
-{ use integer;
-  my $body = shift;
-  my @insns = (&$body,&$body,&$body,&$body);
-  my ($a,$b,$c,$d,$e,$f,$g,$h);
-
-	&vext_8		($T0,@X[0],@X[1],4);	# X[1..4]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vext_8		($T1,@X[2],@X[3],4);	# X[9..12]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vshr_u32	($T2,$T0,$sigma0[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(@X[0],@X[0],$T1);	# X[0..3] += X[9..12]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vshr_u32	($T1,$T0,$sigma0[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vsli_32	($T2,$T0,32-$sigma0[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vshr_u32	($T3,$T0,$sigma0[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&veor		($T1,$T1,$T2);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vsli_32	($T3,$T0,32-$sigma0[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dhi(@X[3]),$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&veor		($T1,$T1,$T3);		# sigma0(X[1..4])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dhi(@X[3]),32-$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T5,&Dhi(@X[3]),$sigma1[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(@X[0],@X[0],$T1);	# X[0..3] += sigma0(X[1..4])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dhi(@X[3]),$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dhi(@X[3]),32-$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);		# sigma1(X[14..15])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(&Dlo(@X[0]),&Dlo(@X[0]),$T5);# X[0..1] += sigma1(X[14..15])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dlo(@X[0]),$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dlo(@X[0]),32-$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T5,&Dlo(@X[0]),$sigma1[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vshr_u32	($T4,&Dlo(@X[0]),$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vld1_32	("{$T0}","[$Ktbl,:128]!");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &vsli_32	($T4,&Dlo(@X[0]),32-$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &veor		($T5,$T5,$T4);		# sigma1(X[16..17])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	(&Dhi(@X[0]),&Dhi(@X[0]),$T5);# X[2..3] += sigma1(X[16..17])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	($T0,$T0,@X[0]);
-	 while($#insns>=2) { eval(shift(@insns)); }
-	&vst1_32	("{$T0}","[$Xfer,:128]!");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-
-	push(@X,shift(@X));		# "rotate" X[]
-}
-
-sub Xpreload()
-{ use integer;
-  my $body = shift;
-  my @insns = (&$body,&$body,&$body,&$body);
-  my ($a,$b,$c,$d,$e,$f,$g,$h);
-
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vld1_32	("{$T0}","[$Ktbl,:128]!");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vrev32_8	(@X[0],@X[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&vadd_i32	($T0,$T0,@X[0]);
-	 foreach (@insns) { eval; }	# remaining instructions
-	&vst1_32	("{$T0}","[$Xfer,:128]!");
-
-	push(@X,shift(@X));		# "rotate" X[]
-}
-
-sub body_00_15 () {
-	(
-	'($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
-	'&add	($h,$h,$t1)',			# h+=X[i]+K[i]
-	'&eor	($t1,$f,$g)',
-	'&eor	($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
-	'&add	($a,$a,$t2)',			# h+=Maj(a,b,c) from the past
-	'&and	($t1,$t1,$e)',
-	'&eor	($t2,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))',	# Sigma1(e)
-	'&eor	($t0,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
-	'&eor	($t1,$t1,$g)',			# Ch(e,f,g)
-	'&add	($h,$h,$t2,"ror#$Sigma1[0]")',	# h+=Sigma1(e)
-	'&eor	($t2,$a,$b)',			# a^b, b^c in next round
-	'&eor	($t0,$t0,$a,"ror#".($Sigma0[2]-$Sigma0[0]))',	# Sigma0(a)
-	'&add	($h,$h,$t1)',			# h+=Ch(e,f,g)
-	'&ldr	($t1,sprintf "[sp,#%d]",4*(($j+1)&15))	if (($j&15)!=15);'.
-	'&ldr	($t1,"[$Ktbl]")				if ($j==15);'.
-	'&ldr	($t1,"[sp,#64]")			if ($j==31)',
-	'&and	($t3,$t3,$t2)',			# (b^c)&=(a^b)
-	'&add	($d,$d,$h)',			# d+=h
-	'&add	($h,$h,$t0,"ror#$Sigma0[0]");'.	# h+=Sigma0(a)
-	'&eor	($t3,$t3,$b)',			# Maj(a,b,c)
-	'$j++;	unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
-	)
-}
-
-$code.=<<___;
-#if __ARM_MAX_ARCH__>=7
-.arch	armv7-a
-.fpu	neon
-
-.global	sha256_block_data_order_neon
-.type	sha256_block_data_order_neon,%function
-.align	4
-sha256_block_data_order_neon:
-.LNEON:
-	stmdb	sp!,{r4-r12,lr}
-
-	sub	$H,sp,#16*4+16
-	adr	$Ktbl,.Lsha256_block_data_order
-	sub	$Ktbl,$Ktbl,#.Lsha256_block_data_order-K256
-	bic	$H,$H,#15		@ align for 128-bit stores
-	mov	$t2,sp
-	mov	sp,$H			@ alloca
-	add	$len,$inp,$len,lsl#6	@ len to point at the end of inp
-
-	vld1.8		{@X[0]},[$inp]!
-	vld1.8		{@X[1]},[$inp]!
-	vld1.8		{@X[2]},[$inp]!
-	vld1.8		{@X[3]},[$inp]!
-	vld1.32		{$T0},[$Ktbl,:128]!
-	vld1.32		{$T1},[$Ktbl,:128]!
-	vld1.32		{$T2},[$Ktbl,:128]!
-	vld1.32		{$T3},[$Ktbl,:128]!
-	vrev32.8	@X[0],@X[0]		@ yes, even on
-	str		$ctx,[sp,#64]
-	vrev32.8	@X[1],@X[1]		@ big-endian
-	str		$inp,[sp,#68]
-	mov		$Xfer,sp
-	vrev32.8	@X[2],@X[2]
-	str		$len,[sp,#72]
-	vrev32.8	@X[3],@X[3]
-	str		$t2,[sp,#76]		@ save original sp
-	vadd.i32	$T0,$T0,@X[0]
-	vadd.i32	$T1,$T1,@X[1]
-	vst1.32		{$T0},[$Xfer,:128]!
-	vadd.i32	$T2,$T2,@X[2]
-	vst1.32		{$T1},[$Xfer,:128]!
-	vadd.i32	$T3,$T3,@X[3]
-	vst1.32		{$T2},[$Xfer,:128]!
-	vst1.32		{$T3},[$Xfer,:128]!
-
-	ldmia		$ctx,{$A-$H}
-	sub		$Xfer,$Xfer,#64
-	ldr		$t1,[sp,#0]
-	eor		$t2,$t2,$t2
-	eor		$t3,$B,$C
-	b		.L_00_48
-
-.align	4
-.L_00_48:
-___
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-$code.=<<___;
-	teq	$t1,#0				@ check for K256 terminator
-	ldr	$t1,[sp,#0]
-	sub	$Xfer,$Xfer,#64
-	bne	.L_00_48
-
-	ldr		$inp,[sp,#68]
-	ldr		$t0,[sp,#72]
-	sub		$Ktbl,$Ktbl,#256	@ rewind $Ktbl
-	teq		$inp,$t0
-	it		eq
-	subeq		$inp,$inp,#64		@ avoid SEGV
-	vld1.8		{@X[0]},[$inp]!		@ load next input block
-	vld1.8		{@X[1]},[$inp]!
-	vld1.8		{@X[2]},[$inp]!
-	vld1.8		{@X[3]},[$inp]!
-	it		ne
-	strne		$inp,[sp,#68]
-	mov		$Xfer,sp
-___
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-$code.=<<___;
-	ldr	$t0,[$t1,#0]
-	add	$A,$A,$t2			@ h+=Maj(a,b,c) from the past
-	ldr	$t2,[$t1,#4]
-	ldr	$t3,[$t1,#8]
-	ldr	$t4,[$t1,#12]
-	add	$A,$A,$t0			@ accumulate
-	ldr	$t0,[$t1,#16]
-	add	$B,$B,$t2
-	ldr	$t2,[$t1,#20]
-	add	$C,$C,$t3
-	ldr	$t3,[$t1,#24]
-	add	$D,$D,$t4
-	ldr	$t4,[$t1,#28]
-	add	$E,$E,$t0
-	str	$A,[$t1],#4
-	add	$F,$F,$t2
-	str	$B,[$t1],#4
-	add	$G,$G,$t3
-	str	$C,[$t1],#4
-	add	$H,$H,$t4
-	str	$D,[$t1],#4
-	stmia	$t1,{$E-$H}
-
-	ittte	ne
-	movne	$Xfer,sp
-	ldrne	$t1,[sp,#0]
-	eorne	$t2,$t2,$t2
-	ldreq	sp,[sp,#76]			@ restore original sp
-	itt	ne
-	eorne	$t3,$B,$C
-	bne	.L_00_48
-
-	ldmia	sp!,{r4-r12,pc}
-.size	sha256_block_data_order_neon,.-sha256_block_data_order_neon
-#endif
-___
-}}}
-######################################################################
-# ARMv8 stuff
-#
-{{{
-my ($ABCD,$EFGH,$abcd)=map("q$_",(0..2));
-my @MSG=map("q$_",(8..11));
-my ($W0,$W1,$ABCD_SAVE,$EFGH_SAVE)=map("q$_",(12..15));
-my $Ktbl="r3";
-
-$code.=<<___;
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-
-# ifdef __thumb2__
-#  define INST(a,b,c,d)	.byte	c,d|0xc,a,b
-# else
-#  define INST(a,b,c,d)	.byte	a,b,c,d
-# endif
-
-.type	sha256_block_data_order_armv8,%function
-.align	5
-sha256_block_data_order_armv8:
-.LARMv8:
-	vld1.32	{$ABCD,$EFGH},[$ctx]
-# ifdef __thumb2__
-	adr	$Ktbl,.LARMv8
-	sub	$Ktbl,$Ktbl,#.LARMv8-K256
-# else
-	adrl	$Ktbl,K256
-# endif
-	add	$len,$inp,$len,lsl#6	@ len to point at the end of inp
-
-.Loop_v8:
-	vld1.8		{@MSG[0]-@MSG[1]},[$inp]!
-	vld1.8		{@MSG[2]-@MSG[3]},[$inp]!
-	vld1.32		{$W0},[$Ktbl]!
-	vrev32.8	@MSG[0],@MSG[0]
-	vrev32.8	@MSG[1],@MSG[1]
-	vrev32.8	@MSG[2],@MSG[2]
-	vrev32.8	@MSG[3],@MSG[3]
-	vmov		$ABCD_SAVE,$ABCD	@ offload
-	vmov		$EFGH_SAVE,$EFGH
-	teq		$inp,$len
-___
-for($i=0;$i<12;$i++) {
-$code.=<<___;
-	vld1.32		{$W1},[$Ktbl]!
-	vadd.i32	$W0,$W0,@MSG[0]
-	sha256su0	@MSG[0],@MSG[1]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-	sha256su1	@MSG[0],@MSG[2],@MSG[3]
-___
-	($W0,$W1)=($W1,$W0);	push(@MSG,shift(@MSG));
-}
-$code.=<<___;
-	vld1.32		{$W1},[$Ktbl]!
-	vadd.i32	$W0,$W0,@MSG[0]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-
-	vld1.32		{$W0},[$Ktbl]!
-	vadd.i32	$W1,$W1,@MSG[1]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W1
-	sha256h2	$EFGH,$abcd,$W1
-
-	vld1.32		{$W1},[$Ktbl]
-	vadd.i32	$W0,$W0,@MSG[2]
-	sub		$Ktbl,$Ktbl,#256-16	@ rewind
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-
-	vadd.i32	$W1,$W1,@MSG[3]
-	vmov		$abcd,$ABCD
-	sha256h		$ABCD,$EFGH,$W1
-	sha256h2	$EFGH,$abcd,$W1
-
-	vadd.i32	$ABCD,$ABCD,$ABCD_SAVE
-	vadd.i32	$EFGH,$EFGH,$EFGH_SAVE
-	it		ne
-	bne		.Loop_v8
-
-	vst1.32		{$ABCD,$EFGH},[$ctx]
-
-	ret		@ bx lr
-.size	sha256_block_data_order_armv8,.-sha256_block_data_order_armv8
-#endif
-___
-}}}
-$code.=<<___;
-.asciz  "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
-.align	2
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.comm   OPENSSL_armcap_P,4,4
-#endif
-___
-
-open SELF,$0;
-while(<SELF>) {
-	next if (/^#!/);
-	last if (!s/^#/@/ and !/^$/);
-	print;
-}
-close SELF;
-
-{   my  %opcode = (
-	"sha256h"	=> 0xf3000c40,	"sha256h2"	=> 0xf3100c40,
-	"sha256su0"	=> 0xf3ba03c0,	"sha256su1"	=> 0xf3200c40	);
-
-    sub unsha256 {
-	my ($mnemonic,$arg)=@_;
-
-	if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) {
-	    my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19)
-					 |(($2&7)<<17)|(($2&8)<<4)
-					 |(($3&7)<<1) |(($3&8)<<2);
-	    # since ARMv7 instructions are always encoded little-endian.
-	    # correct solution is to use .inst directive, but older
-	    # assemblers don't implement it:-(
-	    sprintf "INST(0x%02x,0x%02x,0x%02x,0x%02x)\t@ %s %s",
-			$word&0xff,($word>>8)&0xff,
-			($word>>16)&0xff,($word>>24)&0xff,
-			$mnemonic,$arg;
-	}
-    }
-}
-
-foreach (split($/,$code)) {
-
-	s/\`([^\`]*)\`/eval $1/geo;
-
-	s/\b(sha256\w+)\s+(q.*)/unsha256($1,$2)/geo;
-
-	s/\bret\b/bx	lr/go		or
-	s/\bbx\s+lr\b/.word\t0xe12fff1e/go;	# make it possible to compile with -march=armv4
-
-	print $_,"\n";
-}
-
-close STDOUT; # enforce flush
diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c
deleted file mode 100644
index f85933fdec75..000000000000
--- a/arch/arm/crypto/sha256_glue.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Glue code for the SHA256 Secure Hash Algorithm assembly implementation
- * using optimized ARM assembler and NEON instructions.
- *
- * Copyright © 2015 Google Inc.
- *
- * This file is based on sha256_ssse3_glue.c:
- *   Copyright (C) 2013 Intel Corporation
- *   Author: Tim Chen <tim.c.chen@linux.intel.com>
- */
-
-#include <crypto/internal/hash.h>
-#include <linux/crypto.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <asm/simd.h>
-#include <asm/neon.h>
-
-#include "sha256_glue.h"
-
-asmlinkage void sha256_block_data_order(struct sha256_state *state,
-					const u8 *data, int num_blks);
-
-int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
-			     unsigned int len)
-{
-	/* make sure casting to sha256_block_fn() is safe */
-	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
-
-	return sha256_base_do_update(desc, data, len, sha256_block_data_order);
-}
-EXPORT_SYMBOL(crypto_sha256_arm_update);
-
-static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
-{
-	sha256_base_do_finalize(desc, sha256_block_data_order);
-	return sha256_base_finish(desc, out);
-}
-
-int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
-			    unsigned int len, u8 *out)
-{
-	sha256_base_do_update(desc, data, len, sha256_block_data_order);
-	return crypto_sha256_arm_final(desc, out);
-}
-EXPORT_SYMBOL(crypto_sha256_arm_finup);
-
-static struct shash_alg algs[] = { {
-	.digestsize	=	SHA256_DIGEST_SIZE,
-	.init		=	sha256_base_init,
-	.update		=	crypto_sha256_arm_update,
-	.final		=	crypto_sha256_arm_final,
-	.finup		=	crypto_sha256_arm_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha256",
-		.cra_driver_name =	"sha256-asm",
-		.cra_priority	=	150,
-		.cra_blocksize	=	SHA256_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-}, {
-	.digestsize	=	SHA224_DIGEST_SIZE,
-	.init		=	sha224_base_init,
-	.update		=	crypto_sha256_arm_update,
-	.final		=	crypto_sha256_arm_final,
-	.finup		=	crypto_sha256_arm_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha224",
-		.cra_driver_name =	"sha224-asm",
-		.cra_priority	=	150,
-		.cra_blocksize	=	SHA224_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-} };
-
-static int __init sha256_mod_init(void)
-{
-	int res = crypto_register_shashes(algs, ARRAY_SIZE(algs));
-
-	if (res < 0)
-		return res;
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) {
-		res = crypto_register_shashes(sha256_neon_algs,
-					      ARRAY_SIZE(sha256_neon_algs));
-
-		if (res < 0)
-			crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-	}
-
-	return res;
-}
-
-static void __exit sha256_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon())
-		crypto_unregister_shashes(sha256_neon_algs,
-					  ARRAY_SIZE(sha256_neon_algs));
-}
-
-module_init(sha256_mod_init);
-module_exit(sha256_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm (ARM), including NEON");
-
-MODULE_ALIAS_CRYPTO("sha256");
diff --git a/arch/arm/crypto/sha256_glue.h b/arch/arm/crypto/sha256_glue.h
deleted file mode 100644
index 9f0d578bab5f..000000000000
--- a/arch/arm/crypto/sha256_glue.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _CRYPTO_SHA256_GLUE_H
-#define _CRYPTO_SHA256_GLUE_H
-
-#include <linux/crypto.h>
-
-extern struct shash_alg sha256_neon_algs[2];
-
-int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
-			     unsigned int len);
-
-int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
-			    unsigned int len, u8 *hash);
-
-#endif /* _CRYPTO_SHA256_GLUE_H */
diff --git a/arch/arm/crypto/sha256_neon_glue.c b/arch/arm/crypto/sha256_neon_glue.c
deleted file mode 100644
index ccdcfff71910..000000000000
--- a/arch/arm/crypto/sha256_neon_glue.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Glue code for the SHA256 Secure Hash Algorithm assembly implementation
- * using NEON instructions.
- *
- * Copyright © 2015 Google Inc.
- *
- * This file is based on sha512_neon_glue.c:
- *   Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <asm/byteorder.h>
-#include <asm/simd.h>
-#include <asm/neon.h>
-
-#include "sha256_glue.h"
-
-asmlinkage void sha256_block_data_order_neon(struct sha256_state *digest,
-					     const u8 *data, int num_blks);
-
-static int crypto_sha256_neon_update(struct shash_desc *desc, const u8 *data,
-				     unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE)
-		return crypto_sha256_arm_update(desc, data, len);
-
-	kernel_neon_begin();
-	sha256_base_do_update(desc, data, len, sha256_block_data_order_neon);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int crypto_sha256_neon_finup(struct shash_desc *desc, const u8 *data,
-				    unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return crypto_sha256_arm_finup(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha256_base_do_update(desc, data, len,
-				      sha256_block_data_order_neon);
-	sha256_base_do_finalize(desc, sha256_block_data_order_neon);
-	kernel_neon_end();
-
-	return sha256_base_finish(desc, out);
-}
-
-static int crypto_sha256_neon_final(struct shash_desc *desc, u8 *out)
-{
-	return crypto_sha256_neon_finup(desc, NULL, 0, out);
-}
-
-struct shash_alg sha256_neon_algs[] = { {
-	.digestsize	=	SHA256_DIGEST_SIZE,
-	.init		=	sha256_base_init,
-	.update		=	crypto_sha256_neon_update,
-	.final		=	crypto_sha256_neon_final,
-	.finup		=	crypto_sha256_neon_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha256",
-		.cra_driver_name =	"sha256-neon",
-		.cra_priority	=	250,
-		.cra_blocksize	=	SHA256_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-}, {
-	.digestsize	=	SHA224_DIGEST_SIZE,
-	.init		=	sha224_base_init,
-	.update		=	crypto_sha256_neon_update,
-	.final		=	crypto_sha256_neon_final,
-	.finup		=	crypto_sha256_neon_finup,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha224",
-		.cra_driver_name =	"sha224-neon",
-		.cra_priority	=	250,
-		.cra_blocksize	=	SHA224_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-} };
diff --git a/arch/arm/crypto/sha512-armv4.pl b/arch/arm/crypto/sha512-armv4.pl
deleted file mode 100644
index 2fc3516912fa..000000000000
--- a/arch/arm/crypto/sha512-armv4.pl
+++ /dev/null
@@ -1,657 +0,0 @@
-#!/usr/bin/env perl
-# SPDX-License-Identifier: GPL-2.0
-
-# This code is taken from the OpenSSL project but the author (Andy Polyakov)
-# has relicensed it under the GPLv2. Therefore this program is free software;
-# you can redistribute it and/or modify it under the terms of the GNU General
-# Public License version 2 as published by the Free Software Foundation.
-#
-# The original headers, including the original license headers, are
-# included below for completeness.
-
-# ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see https://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# SHA512 block procedure for ARMv4. September 2007.
-
-# This code is ~4.5 (four and a half) times faster than code generated
-# by gcc 3.4 and it spends ~72 clock cycles per byte [on single-issue
-# Xscale PXA250 core].
-#
-# July 2010.
-#
-# Rescheduling for dual-issue pipeline resulted in 6% improvement on
-# Cortex A8 core and ~40 cycles per processed byte.
-
-# February 2011.
-#
-# Profiler-assisted and platform-specific optimization resulted in 7%
-# improvement on Coxtex A8 core and ~38 cycles per byte.
-
-# March 2011.
-#
-# Add NEON implementation. On Cortex A8 it was measured to process
-# one byte in 23.3 cycles or ~60% faster than integer-only code.
-
-# August 2012.
-#
-# Improve NEON performance by 12% on Snapdragon S4. In absolute
-# terms it's 22.6 cycles per byte, which is disappointing result.
-# Technical writers asserted that 3-way S4 pipeline can sustain
-# multiple NEON instructions per cycle, but dual NEON issue could
-# not be observed, see https://www.openssl.org/~appro/Snapdragon-S4.html
-# for further details. On side note Cortex-A15 processes one byte in
-# 16 cycles.
-
-# Byte order [in]dependence. =========================================
-#
-# Originally caller was expected to maintain specific *dword* order in
-# h[0-7], namely with most significant dword at *lower* address, which
-# was reflected in below two parameters as 0 and 4. Now caller is
-# expected to maintain native byte order for whole 64-bit values.
-$hi="HI";
-$lo="LO";
-# ====================================================================
-
-while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
-
-$ctx="r0";	# parameter block
-$inp="r1";
-$len="r2";
-
-$Tlo="r3";
-$Thi="r4";
-$Alo="r5";
-$Ahi="r6";
-$Elo="r7";
-$Ehi="r8";
-$t0="r9";
-$t1="r10";
-$t2="r11";
-$t3="r12";
-############	r13 is stack pointer
-$Ktbl="r14";
-############	r15 is program counter
-
-$Aoff=8*0;
-$Boff=8*1;
-$Coff=8*2;
-$Doff=8*3;
-$Eoff=8*4;
-$Foff=8*5;
-$Goff=8*6;
-$Hoff=8*7;
-$Xoff=8*8;
-
-sub BODY_00_15() {
-my $magic = shift;
-$code.=<<___;
-	@ Sigma1(x)	(ROTR((x),14) ^ ROTR((x),18)  ^ ROTR((x),41))
-	@ LO		lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23
-	@ HI		hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23
-	mov	$t0,$Elo,lsr#14
-	str	$Tlo,[sp,#$Xoff+0]
-	mov	$t1,$Ehi,lsr#14
-	str	$Thi,[sp,#$Xoff+4]
-	eor	$t0,$t0,$Ehi,lsl#18
-	ldr	$t2,[sp,#$Hoff+0]	@ h.lo
-	eor	$t1,$t1,$Elo,lsl#18
-	ldr	$t3,[sp,#$Hoff+4]	@ h.hi
-	eor	$t0,$t0,$Elo,lsr#18
-	eor	$t1,$t1,$Ehi,lsr#18
-	eor	$t0,$t0,$Ehi,lsl#14
-	eor	$t1,$t1,$Elo,lsl#14
-	eor	$t0,$t0,$Ehi,lsr#9
-	eor	$t1,$t1,$Elo,lsr#9
-	eor	$t0,$t0,$Elo,lsl#23
-	eor	$t1,$t1,$Ehi,lsl#23	@ Sigma1(e)
-	adds	$Tlo,$Tlo,$t0
-	ldr	$t0,[sp,#$Foff+0]	@ f.lo
-	adc	$Thi,$Thi,$t1		@ T += Sigma1(e)
-	ldr	$t1,[sp,#$Foff+4]	@ f.hi
-	adds	$Tlo,$Tlo,$t2
-	ldr	$t2,[sp,#$Goff+0]	@ g.lo
-	adc	$Thi,$Thi,$t3		@ T += h
-	ldr	$t3,[sp,#$Goff+4]	@ g.hi
-
-	eor	$t0,$t0,$t2
-	str	$Elo,[sp,#$Eoff+0]
-	eor	$t1,$t1,$t3
-	str	$Ehi,[sp,#$Eoff+4]
-	and	$t0,$t0,$Elo
-	str	$Alo,[sp,#$Aoff+0]
-	and	$t1,$t1,$Ehi
-	str	$Ahi,[sp,#$Aoff+4]
-	eor	$t0,$t0,$t2
-	ldr	$t2,[$Ktbl,#$lo]	@ K[i].lo
-	eor	$t1,$t1,$t3		@ Ch(e,f,g)
-	ldr	$t3,[$Ktbl,#$hi]	@ K[i].hi
-
-	adds	$Tlo,$Tlo,$t0
-	ldr	$Elo,[sp,#$Doff+0]	@ d.lo
-	adc	$Thi,$Thi,$t1		@ T += Ch(e,f,g)
-	ldr	$Ehi,[sp,#$Doff+4]	@ d.hi
-	adds	$Tlo,$Tlo,$t2
-	and	$t0,$t2,#0xff
-	adc	$Thi,$Thi,$t3		@ T += K[i]
-	adds	$Elo,$Elo,$Tlo
-	ldr	$t2,[sp,#$Boff+0]	@ b.lo
-	adc	$Ehi,$Ehi,$Thi		@ d += T
-	teq	$t0,#$magic
-
-	ldr	$t3,[sp,#$Coff+0]	@ c.lo
-#if __ARM_ARCH__>=7
-	it	eq			@ Thumb2 thing, sanity check in ARM
-#endif
-	orreq	$Ktbl,$Ktbl,#1
-	@ Sigma0(x)	(ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39))
-	@ LO		lo>>28^hi<<4  ^ hi>>2^lo<<30 ^ hi>>7^lo<<25
-	@ HI		hi>>28^lo<<4  ^ lo>>2^hi<<30 ^ lo>>7^hi<<25
-	mov	$t0,$Alo,lsr#28
-	mov	$t1,$Ahi,lsr#28
-	eor	$t0,$t0,$Ahi,lsl#4
-	eor	$t1,$t1,$Alo,lsl#4
-	eor	$t0,$t0,$Ahi,lsr#2
-	eor	$t1,$t1,$Alo,lsr#2
-	eor	$t0,$t0,$Alo,lsl#30
-	eor	$t1,$t1,$Ahi,lsl#30
-	eor	$t0,$t0,$Ahi,lsr#7
-	eor	$t1,$t1,$Alo,lsr#7
-	eor	$t0,$t0,$Alo,lsl#25
-	eor	$t1,$t1,$Ahi,lsl#25	@ Sigma0(a)
-	adds	$Tlo,$Tlo,$t0
-	and	$t0,$Alo,$t2
-	adc	$Thi,$Thi,$t1		@ T += Sigma0(a)
-
-	ldr	$t1,[sp,#$Boff+4]	@ b.hi
-	orr	$Alo,$Alo,$t2
-	ldr	$t2,[sp,#$Coff+4]	@ c.hi
-	and	$Alo,$Alo,$t3
-	and	$t3,$Ahi,$t1
-	orr	$Ahi,$Ahi,$t1
-	orr	$Alo,$Alo,$t0		@ Maj(a,b,c).lo
-	and	$Ahi,$Ahi,$t2
-	adds	$Alo,$Alo,$Tlo
-	orr	$Ahi,$Ahi,$t3		@ Maj(a,b,c).hi
-	sub	sp,sp,#8
-	adc	$Ahi,$Ahi,$Thi		@ h += T
-	tst	$Ktbl,#1
-	add	$Ktbl,$Ktbl,#8
-___
-}
-$code=<<___;
-#ifndef __KERNEL__
-# include "arm_arch.h"
-# define VFP_ABI_PUSH	vstmdb	sp!,{d8-d15}
-# define VFP_ABI_POP	vldmia	sp!,{d8-d15}
-#else
-# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-# define __ARM_MAX_ARCH__ 7
-# define VFP_ABI_PUSH
-# define VFP_ABI_POP
-#endif
-
-#ifdef __ARMEL__
-# define LO 0
-# define HI 4
-# define WORD64(hi0,lo0,hi1,lo1)	.word	lo0,hi0, lo1,hi1
-#else
-# define HI 0
-# define LO 4
-# define WORD64(hi0,lo0,hi1,lo1)	.word	hi0,lo0, hi1,lo1
-#endif
-
-.text
-#if __ARM_ARCH__<7
-.code	32
-#else
-.syntax unified
-# ifdef __thumb2__
-.thumb
-# else
-.code   32
-# endif
-#endif
-
-.type	K512,%object
-.align	5
-K512:
-WORD64(0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd)
-WORD64(0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc)
-WORD64(0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019)
-WORD64(0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118)
-WORD64(0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe)
-WORD64(0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2)
-WORD64(0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1)
-WORD64(0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694)
-WORD64(0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3)
-WORD64(0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65)
-WORD64(0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483)
-WORD64(0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5)
-WORD64(0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210)
-WORD64(0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4)
-WORD64(0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725)
-WORD64(0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70)
-WORD64(0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926)
-WORD64(0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df)
-WORD64(0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8)
-WORD64(0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b)
-WORD64(0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001)
-WORD64(0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30)
-WORD64(0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910)
-WORD64(0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8)
-WORD64(0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53)
-WORD64(0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8)
-WORD64(0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb)
-WORD64(0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3)
-WORD64(0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60)
-WORD64(0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec)
-WORD64(0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9)
-WORD64(0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b)
-WORD64(0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207)
-WORD64(0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178)
-WORD64(0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6)
-WORD64(0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b)
-WORD64(0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493)
-WORD64(0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c)
-WORD64(0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a)
-WORD64(0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817)
-.size	K512,.-K512
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.LOPENSSL_armcap:
-.word	OPENSSL_armcap_P-sha512_block_data_order
-.skip	32-4
-#else
-.skip	32
-#endif
-
-.global	sha512_block_data_order
-.type	sha512_block_data_order,%function
-sha512_block_data_order:
-.Lsha512_block_data_order:
-#if __ARM_ARCH__<7
-	sub	r3,pc,#8		@ sha512_block_data_order
-#else
-	adr	r3,.Lsha512_block_data_order
-#endif
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	ldr	r12,.LOPENSSL_armcap
-	ldr	r12,[r3,r12]		@ OPENSSL_armcap_P
-	tst	r12,#1
-	bne	.LNEON
-#endif
-	add	$len,$inp,$len,lsl#7	@ len to point at the end of inp
-	stmdb	sp!,{r4-r12,lr}
-	sub	$Ktbl,r3,#672		@ K512
-	sub	sp,sp,#9*8
-
-	ldr	$Elo,[$ctx,#$Eoff+$lo]
-	ldr	$Ehi,[$ctx,#$Eoff+$hi]
-	ldr	$t0, [$ctx,#$Goff+$lo]
-	ldr	$t1, [$ctx,#$Goff+$hi]
-	ldr	$t2, [$ctx,#$Hoff+$lo]
-	ldr	$t3, [$ctx,#$Hoff+$hi]
-.Loop:
-	str	$t0, [sp,#$Goff+0]
-	str	$t1, [sp,#$Goff+4]
-	str	$t2, [sp,#$Hoff+0]
-	str	$t3, [sp,#$Hoff+4]
-	ldr	$Alo,[$ctx,#$Aoff+$lo]
-	ldr	$Ahi,[$ctx,#$Aoff+$hi]
-	ldr	$Tlo,[$ctx,#$Boff+$lo]
-	ldr	$Thi,[$ctx,#$Boff+$hi]
-	ldr	$t0, [$ctx,#$Coff+$lo]
-	ldr	$t1, [$ctx,#$Coff+$hi]
-	ldr	$t2, [$ctx,#$Doff+$lo]
-	ldr	$t3, [$ctx,#$Doff+$hi]
-	str	$Tlo,[sp,#$Boff+0]
-	str	$Thi,[sp,#$Boff+4]
-	str	$t0, [sp,#$Coff+0]
-	str	$t1, [sp,#$Coff+4]
-	str	$t2, [sp,#$Doff+0]
-	str	$t3, [sp,#$Doff+4]
-	ldr	$Tlo,[$ctx,#$Foff+$lo]
-	ldr	$Thi,[$ctx,#$Foff+$hi]
-	str	$Tlo,[sp,#$Foff+0]
-	str	$Thi,[sp,#$Foff+4]
-
-.L00_15:
-#if __ARM_ARCH__<7
-	ldrb	$Tlo,[$inp,#7]
-	ldrb	$t0, [$inp,#6]
-	ldrb	$t1, [$inp,#5]
-	ldrb	$t2, [$inp,#4]
-	ldrb	$Thi,[$inp,#3]
-	ldrb	$t3, [$inp,#2]
-	orr	$Tlo,$Tlo,$t0,lsl#8
-	ldrb	$t0, [$inp,#1]
-	orr	$Tlo,$Tlo,$t1,lsl#16
-	ldrb	$t1, [$inp],#8
-	orr	$Tlo,$Tlo,$t2,lsl#24
-	orr	$Thi,$Thi,$t3,lsl#8
-	orr	$Thi,$Thi,$t0,lsl#16
-	orr	$Thi,$Thi,$t1,lsl#24
-#else
-	ldr	$Tlo,[$inp,#4]
-	ldr	$Thi,[$inp],#8
-#ifdef __ARMEL__
-	rev	$Tlo,$Tlo
-	rev	$Thi,$Thi
-#endif
-#endif
-___
-	&BODY_00_15(0x94);
-$code.=<<___;
-	tst	$Ktbl,#1
-	beq	.L00_15
-	ldr	$t0,[sp,#`$Xoff+8*(16-1)`+0]
-	ldr	$t1,[sp,#`$Xoff+8*(16-1)`+4]
-	bic	$Ktbl,$Ktbl,#1
-.L16_79:
-	@ sigma0(x)	(ROTR((x),1)  ^ ROTR((x),8)  ^ ((x)>>7))
-	@ LO		lo>>1^hi<<31  ^ lo>>8^hi<<24 ^ lo>>7^hi<<25
-	@ HI		hi>>1^lo<<31  ^ hi>>8^lo<<24 ^ hi>>7
-	mov	$Tlo,$t0,lsr#1
-	ldr	$t2,[sp,#`$Xoff+8*(16-14)`+0]
-	mov	$Thi,$t1,lsr#1
-	ldr	$t3,[sp,#`$Xoff+8*(16-14)`+4]
-	eor	$Tlo,$Tlo,$t1,lsl#31
-	eor	$Thi,$Thi,$t0,lsl#31
-	eor	$Tlo,$Tlo,$t0,lsr#8
-	eor	$Thi,$Thi,$t1,lsr#8
-	eor	$Tlo,$Tlo,$t1,lsl#24
-	eor	$Thi,$Thi,$t0,lsl#24
-	eor	$Tlo,$Tlo,$t0,lsr#7
-	eor	$Thi,$Thi,$t1,lsr#7
-	eor	$Tlo,$Tlo,$t1,lsl#25
-
-	@ sigma1(x)	(ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6))
-	@ LO		lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26
-	@ HI		hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6
-	mov	$t0,$t2,lsr#19
-	mov	$t1,$t3,lsr#19
-	eor	$t0,$t0,$t3,lsl#13
-	eor	$t1,$t1,$t2,lsl#13
-	eor	$t0,$t0,$t3,lsr#29
-	eor	$t1,$t1,$t2,lsr#29
-	eor	$t0,$t0,$t2,lsl#3
-	eor	$t1,$t1,$t3,lsl#3
-	eor	$t0,$t0,$t2,lsr#6
-	eor	$t1,$t1,$t3,lsr#6
-	ldr	$t2,[sp,#`$Xoff+8*(16-9)`+0]
-	eor	$t0,$t0,$t3,lsl#26
-
-	ldr	$t3,[sp,#`$Xoff+8*(16-9)`+4]
-	adds	$Tlo,$Tlo,$t0
-	ldr	$t0,[sp,#`$Xoff+8*16`+0]
-	adc	$Thi,$Thi,$t1
-
-	ldr	$t1,[sp,#`$Xoff+8*16`+4]
-	adds	$Tlo,$Tlo,$t2
-	adc	$Thi,$Thi,$t3
-	adds	$Tlo,$Tlo,$t0
-	adc	$Thi,$Thi,$t1
-___
-	&BODY_00_15(0x17);
-$code.=<<___;
-#if __ARM_ARCH__>=7
-	ittt	eq			@ Thumb2 thing, sanity check in ARM
-#endif
-	ldreq	$t0,[sp,#`$Xoff+8*(16-1)`+0]
-	ldreq	$t1,[sp,#`$Xoff+8*(16-1)`+4]
-	beq	.L16_79
-	bic	$Ktbl,$Ktbl,#1
-
-	ldr	$Tlo,[sp,#$Boff+0]
-	ldr	$Thi,[sp,#$Boff+4]
-	ldr	$t0, [$ctx,#$Aoff+$lo]
-	ldr	$t1, [$ctx,#$Aoff+$hi]
-	ldr	$t2, [$ctx,#$Boff+$lo]
-	ldr	$t3, [$ctx,#$Boff+$hi]
-	adds	$t0,$Alo,$t0
-	str	$t0, [$ctx,#$Aoff+$lo]
-	adc	$t1,$Ahi,$t1
-	str	$t1, [$ctx,#$Aoff+$hi]
-	adds	$t2,$Tlo,$t2
-	str	$t2, [$ctx,#$Boff+$lo]
-	adc	$t3,$Thi,$t3
-	str	$t3, [$ctx,#$Boff+$hi]
-
-	ldr	$Alo,[sp,#$Coff+0]
-	ldr	$Ahi,[sp,#$Coff+4]
-	ldr	$Tlo,[sp,#$Doff+0]
-	ldr	$Thi,[sp,#$Doff+4]
-	ldr	$t0, [$ctx,#$Coff+$lo]
-	ldr	$t1, [$ctx,#$Coff+$hi]
-	ldr	$t2, [$ctx,#$Doff+$lo]
-	ldr	$t3, [$ctx,#$Doff+$hi]
-	adds	$t0,$Alo,$t0
-	str	$t0, [$ctx,#$Coff+$lo]
-	adc	$t1,$Ahi,$t1
-	str	$t1, [$ctx,#$Coff+$hi]
-	adds	$t2,$Tlo,$t2
-	str	$t2, [$ctx,#$Doff+$lo]
-	adc	$t3,$Thi,$t3
-	str	$t3, [$ctx,#$Doff+$hi]
-
-	ldr	$Tlo,[sp,#$Foff+0]
-	ldr	$Thi,[sp,#$Foff+4]
-	ldr	$t0, [$ctx,#$Eoff+$lo]
-	ldr	$t1, [$ctx,#$Eoff+$hi]
-	ldr	$t2, [$ctx,#$Foff+$lo]
-	ldr	$t3, [$ctx,#$Foff+$hi]
-	adds	$Elo,$Elo,$t0
-	str	$Elo,[$ctx,#$Eoff+$lo]
-	adc	$Ehi,$Ehi,$t1
-	str	$Ehi,[$ctx,#$Eoff+$hi]
-	adds	$t2,$Tlo,$t2
-	str	$t2, [$ctx,#$Foff+$lo]
-	adc	$t3,$Thi,$t3
-	str	$t3, [$ctx,#$Foff+$hi]
-
-	ldr	$Alo,[sp,#$Goff+0]
-	ldr	$Ahi,[sp,#$Goff+4]
-	ldr	$Tlo,[sp,#$Hoff+0]
-	ldr	$Thi,[sp,#$Hoff+4]
-	ldr	$t0, [$ctx,#$Goff+$lo]
-	ldr	$t1, [$ctx,#$Goff+$hi]
-	ldr	$t2, [$ctx,#$Hoff+$lo]
-	ldr	$t3, [$ctx,#$Hoff+$hi]
-	adds	$t0,$Alo,$t0
-	str	$t0, [$ctx,#$Goff+$lo]
-	adc	$t1,$Ahi,$t1
-	str	$t1, [$ctx,#$Goff+$hi]
-	adds	$t2,$Tlo,$t2
-	str	$t2, [$ctx,#$Hoff+$lo]
-	adc	$t3,$Thi,$t3
-	str	$t3, [$ctx,#$Hoff+$hi]
-
-	add	sp,sp,#640
-	sub	$Ktbl,$Ktbl,#640
-
-	teq	$inp,$len
-	bne	.Loop
-
-	add	sp,sp,#8*9		@ destroy frame
-#if __ARM_ARCH__>=5
-	ldmia	sp!,{r4-r12,pc}
-#else
-	ldmia	sp!,{r4-r12,lr}
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	sha512_block_data_order,.-sha512_block_data_order
-___
-
-{
-my @Sigma0=(28,34,39);
-my @Sigma1=(14,18,41);
-my @sigma0=(1, 8, 7);
-my @sigma1=(19,61,6);
-
-my $Ktbl="r3";
-my $cnt="r12";	# volatile register known as ip, intra-procedure-call scratch
-
-my @X=map("d$_",(0..15));
-my @V=($A,$B,$C,$D,$E,$F,$G,$H)=map("d$_",(16..23));
-
-sub NEON_00_15() {
-my $i=shift;
-my ($a,$b,$c,$d,$e,$f,$g,$h)=@_;
-my ($t0,$t1,$t2,$T1,$K,$Ch,$Maj)=map("d$_",(24..31));	# temps
-
-$code.=<<___ if ($i<16 || $i&1);
-	vshr.u64	$t0,$e,#@Sigma1[0]	@ $i
-#if $i<16
-	vld1.64		{@X[$i%16]},[$inp]!	@ handles unaligned
-#endif
-	vshr.u64	$t1,$e,#@Sigma1[1]
-#if $i>0
-	 vadd.i64	$a,$Maj			@ h+=Maj from the past
-#endif
-	vshr.u64	$t2,$e,#@Sigma1[2]
-___
-$code.=<<___;
-	vld1.64		{$K},[$Ktbl,:64]!	@ K[i++]
-	vsli.64		$t0,$e,#`64-@Sigma1[0]`
-	vsli.64		$t1,$e,#`64-@Sigma1[1]`
-	vmov		$Ch,$e
-	vsli.64		$t2,$e,#`64-@Sigma1[2]`
-#if $i<16 && defined(__ARMEL__)
-	vrev64.8	@X[$i],@X[$i]
-#endif
-	veor		$t1,$t0
-	vbsl		$Ch,$f,$g		@ Ch(e,f,g)
-	vshr.u64	$t0,$a,#@Sigma0[0]
-	veor		$t2,$t1			@ Sigma1(e)
-	vadd.i64	$T1,$Ch,$h
-	vshr.u64	$t1,$a,#@Sigma0[1]
-	vsli.64		$t0,$a,#`64-@Sigma0[0]`
-	vadd.i64	$T1,$t2
-	vshr.u64	$t2,$a,#@Sigma0[2]
-	vadd.i64	$K,@X[$i%16]
-	vsli.64		$t1,$a,#`64-@Sigma0[1]`
-	veor		$Maj,$a,$b
-	vsli.64		$t2,$a,#`64-@Sigma0[2]`
-	veor		$h,$t0,$t1
-	vadd.i64	$T1,$K
-	vbsl		$Maj,$c,$b		@ Maj(a,b,c)
-	veor		$h,$t2			@ Sigma0(a)
-	vadd.i64	$d,$T1
-	vadd.i64	$Maj,$T1
-	@ vadd.i64	$h,$Maj
-___
-}
-
-sub NEON_16_79() {
-my $i=shift;
-
-if ($i&1)	{ &NEON_00_15($i,@_); return; }
-
-# 2x-vectorized, therefore runs every 2nd round
-my @X=map("q$_",(0..7));			# view @X as 128-bit vector
-my ($t0,$t1,$s0,$s1) = map("q$_",(12..15));	# temps
-my ($d0,$d1,$d2) = map("d$_",(24..26));		# temps from NEON_00_15
-my $e=@_[4];					# $e from NEON_00_15
-$i /= 2;
-$code.=<<___;
-	vshr.u64	$t0,@X[($i+7)%8],#@sigma1[0]
-	vshr.u64	$t1,@X[($i+7)%8],#@sigma1[1]
-	 vadd.i64	@_[0],d30			@ h+=Maj from the past
-	vshr.u64	$s1,@X[($i+7)%8],#@sigma1[2]
-	vsli.64		$t0,@X[($i+7)%8],#`64-@sigma1[0]`
-	vext.8		$s0,@X[$i%8],@X[($i+1)%8],#8	@ X[i+1]
-	vsli.64		$t1,@X[($i+7)%8],#`64-@sigma1[1]`
-	veor		$s1,$t0
-	vshr.u64	$t0,$s0,#@sigma0[0]
-	veor		$s1,$t1				@ sigma1(X[i+14])
-	vshr.u64	$t1,$s0,#@sigma0[1]
-	vadd.i64	@X[$i%8],$s1
-	vshr.u64	$s1,$s0,#@sigma0[2]
-	vsli.64		$t0,$s0,#`64-@sigma0[0]`
-	vsli.64		$t1,$s0,#`64-@sigma0[1]`
-	vext.8		$s0,@X[($i+4)%8],@X[($i+5)%8],#8	@ X[i+9]
-	veor		$s1,$t0
-	vshr.u64	$d0,$e,#@Sigma1[0]		@ from NEON_00_15
-	vadd.i64	@X[$i%8],$s0
-	vshr.u64	$d1,$e,#@Sigma1[1]		@ from NEON_00_15
-	veor		$s1,$t1				@ sigma0(X[i+1])
-	vshr.u64	$d2,$e,#@Sigma1[2]		@ from NEON_00_15
-	vadd.i64	@X[$i%8],$s1
-___
-	&NEON_00_15(2*$i,@_);
-}
-
-$code.=<<___;
-#if __ARM_MAX_ARCH__>=7
-.arch	armv7-a
-.fpu	neon
-
-.global	sha512_block_data_order_neon
-.type	sha512_block_data_order_neon,%function
-.align	4
-sha512_block_data_order_neon:
-.LNEON:
-	dmb				@ errata #451034 on early Cortex A8
-	add	$len,$inp,$len,lsl#7	@ len to point at the end of inp
-	VFP_ABI_PUSH
-	adr	$Ktbl,.Lsha512_block_data_order
-	sub	$Ktbl,$Ktbl,.Lsha512_block_data_order-K512
-	vldmia	$ctx,{$A-$H}		@ load context
-.Loop_neon:
-___
-for($i=0;$i<16;$i++)	{ &NEON_00_15($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-	mov		$cnt,#4
-.L16_79_neon:
-	subs		$cnt,#1
-___
-for(;$i<32;$i++)	{ &NEON_16_79($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-	bne		.L16_79_neon
-
-	 vadd.i64	$A,d30		@ h+=Maj from the past
-	vldmia		$ctx,{d24-d31}	@ load context to temp
-	vadd.i64	q8,q12		@ vectorized accumulate
-	vadd.i64	q9,q13
-	vadd.i64	q10,q14
-	vadd.i64	q11,q15
-	vstmia		$ctx,{$A-$H}	@ save context
-	teq		$inp,$len
-	sub		$Ktbl,#640	@ rewind K512
-	bne		.Loop_neon
-
-	VFP_ABI_POP
-	ret				@ bx lr
-.size	sha512_block_data_order_neon,.-sha512_block_data_order_neon
-#endif
-___
-}
-$code.=<<___;
-.asciz	"SHA512 block transform for ARMv4/NEON, CRYPTOGAMS by <appro\@openssl.org>"
-.align	2
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.comm	OPENSSL_armcap_P,4,4
-#endif
-___
-
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm;	# make it possible to compile with -march=armv4
-$code =~ s/\bret\b/bx	lr/gm;
-
-open SELF,$0;
-while(<SELF>) {
-	next if (/^#!/);
-	last if (!s/^#/@/ and !/^$/);
-	print;
-}
-close SELF;
-
-print $code;
-close STDOUT; # enforce flush
diff --git a/arch/arm/crypto/sha512-glue.c b/arch/arm/crypto/sha512-glue.c
deleted file mode 100644
index 1be5bd498af3..000000000000
--- a/arch/arm/crypto/sha512-glue.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha512-glue.c - accelerated SHA-384/512 for ARM
- *
- * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/sha2.h>
-#include <crypto/sha512_base.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-
-#include "sha512.h"
-
-MODULE_DESCRIPTION("Accelerated SHA-384/SHA-512 secure hash for ARM");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-
-MODULE_ALIAS_CRYPTO("sha384");
-MODULE_ALIAS_CRYPTO("sha512");
-MODULE_ALIAS_CRYPTO("sha384-arm");
-MODULE_ALIAS_CRYPTO("sha512-arm");
-
-asmlinkage void sha512_block_data_order(struct sha512_state *state,
-					u8 const *src, int blocks);
-
-int sha512_arm_update(struct shash_desc *desc, const u8 *data,
-		      unsigned int len)
-{
-	return sha512_base_do_update(desc, data, len, sha512_block_data_order);
-}
-
-static int sha512_arm_final(struct shash_desc *desc, u8 *out)
-{
-	sha512_base_do_finalize(desc, sha512_block_data_order);
-	return sha512_base_finish(desc, out);
-}
-
-int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
-		     unsigned int len, u8 *out)
-{
-	sha512_base_do_update(desc, data, len, sha512_block_data_order);
-	return sha512_arm_final(desc, out);
-}
-
-static struct shash_alg sha512_arm_algs[] = { {
-	.init			= sha384_base_init,
-	.update			= sha512_arm_update,
-	.final			= sha512_arm_final,
-	.finup			= sha512_arm_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.digestsize		= SHA384_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha384",
-		.cra_driver_name	= "sha384-arm",
-		.cra_priority		= 250,
-		.cra_blocksize		= SHA512_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-},  {
-	.init			= sha512_base_init,
-	.update			= sha512_arm_update,
-	.final			= sha512_arm_final,
-	.finup			= sha512_arm_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.digestsize		= SHA512_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha512",
-		.cra_driver_name	= "sha512-arm",
-		.cra_priority		= 250,
-		.cra_blocksize		= SHA512_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-} };
-
-static int __init sha512_arm_mod_init(void)
-{
-	int err;
-
-	err = crypto_register_shashes(sha512_arm_algs,
-				      ARRAY_SIZE(sha512_arm_algs));
-	if (err)
-		return err;
-
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) {
-		err = crypto_register_shashes(sha512_neon_algs,
-					      ARRAY_SIZE(sha512_neon_algs));
-		if (err)
-			goto err_unregister;
-	}
-	return 0;
-
-err_unregister:
-	crypto_unregister_shashes(sha512_arm_algs,
-				  ARRAY_SIZE(sha512_arm_algs));
-
-	return err;
-}
-
-static void __exit sha512_arm_mod_fini(void)
-{
-	crypto_unregister_shashes(sha512_arm_algs,
-				  ARRAY_SIZE(sha512_arm_algs));
-	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon())
-		crypto_unregister_shashes(sha512_neon_algs,
-					  ARRAY_SIZE(sha512_neon_algs));
-}
-
-module_init(sha512_arm_mod_init);
-module_exit(sha512_arm_mod_fini);
diff --git a/arch/arm/crypto/sha512-neon-glue.c b/arch/arm/crypto/sha512-neon-glue.c
deleted file mode 100644
index c6e58fe475ac..000000000000
--- a/arch/arm/crypto/sha512-neon-glue.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha512-neon-glue.c - accelerated SHA-384/512 for ARM NEON
- *
- * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha2.h>
-#include <crypto/sha512_base.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-#include <asm/simd.h>
-#include <asm/neon.h>
-
-#include "sha512.h"
-
-MODULE_ALIAS_CRYPTO("sha384-neon");
-MODULE_ALIAS_CRYPTO("sha512-neon");
-
-asmlinkage void sha512_block_data_order_neon(struct sha512_state *state,
-					     const u8 *src, int blocks);
-
-static int sha512_neon_update(struct shash_desc *desc, const u8 *data,
-			      unsigned int len)
-{
-	struct sha512_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable() ||
-	    (sctx->count[0] % SHA512_BLOCK_SIZE) + len < SHA512_BLOCK_SIZE)
-		return sha512_arm_update(desc, data, len);
-
-	kernel_neon_begin();
-	sha512_base_do_update(desc, data, len, sha512_block_data_order_neon);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int sha512_neon_finup(struct shash_desc *desc, const u8 *data,
-			     unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable())
-		return sha512_arm_finup(desc, data, len, out);
-
-	kernel_neon_begin();
-	if (len)
-		sha512_base_do_update(desc, data, len,
-				      sha512_block_data_order_neon);
-	sha512_base_do_finalize(desc, sha512_block_data_order_neon);
-	kernel_neon_end();
-
-	return sha512_base_finish(desc, out);
-}
-
-static int sha512_neon_final(struct shash_desc *desc, u8 *out)
-{
-	return sha512_neon_finup(desc, NULL, 0, out);
-}
-
-struct shash_alg sha512_neon_algs[] = { {
-	.init			= sha384_base_init,
-	.update			= sha512_neon_update,
-	.final			= sha512_neon_final,
-	.finup			= sha512_neon_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.digestsize		= SHA384_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha384",
-		.cra_driver_name	= "sha384-neon",
-		.cra_priority		= 300,
-		.cra_blocksize		= SHA384_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-
-	}
-},  {
-	.init			= sha512_base_init,
-	.update			= sha512_neon_update,
-	.final			= sha512_neon_final,
-	.finup			= sha512_neon_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.digestsize		= SHA512_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha512",
-		.cra_driver_name	= "sha512-neon",
-		.cra_priority		= 300,
-		.cra_blocksize		= SHA512_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-} };
diff --git a/arch/arm/crypto/sha512.h b/arch/arm/crypto/sha512.h
deleted file mode 100644
index e14572be76d1..000000000000
--- a/arch/arm/crypto/sha512.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-int sha512_arm_update(struct shash_desc *desc, const u8 *data,
-		      unsigned int len);
-
-int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
-		     unsigned int len, u8 *out);
-
-extern struct shash_alg sha512_neon_algs[2];
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index e3ea34558ada..ecbc100d22a5 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -26,4 +26,10 @@
 
 #define __read_mostly __section(".data..read_mostly")
 
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_ARCH_HAS_CACHE_LINE_SIZE
+int cache_line_size(void);
+#endif
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h
index b9dbe1d4c8fe..b01c59076b84 100644
--- a/arch/arm/include/asm/cachetype.h
+++ b/arch/arm/include/asm/cachetype.h
@@ -83,6 +83,14 @@ static inline unsigned int read_ccsidr(void)
 	asm volatile("mrc p15, 1, %0, c0, c0, 0" : "=r" (val));
 	return val;
 }
+
+static inline unsigned int read_clidr(void)
+{
+	unsigned int val;
+
+	asm volatile("mrc p15, 1, %0, c0, c0, 1" : "=r" (val));
+	return val;
+}
 #else /* CONFIG_CPU_V7M */
 #include <linux/io.h>
 #include "asm/v7m.h"
@@ -96,6 +104,11 @@ static inline unsigned int read_ccsidr(void)
 {
 	return readl(BASEADDR_V7M_SCB + V7M_SCB_CCSIDR);
 }
+
+static inline unsigned int read_clidr(void)
+{
+	return readl(BASEADDR_V7M_SCB + V7M_SCB_CLIDR);
+}
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h
deleted file mode 100644
index f8500e5d6ea8..000000000000
--- a/arch/arm/include/asm/cti.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASMARM_CTI_H
-#define __ASMARM_CTI_H
-
-#include	<asm/io.h>
-#include	<asm/hardware/coresight.h>
-
-/* The registers' definition is from section 3.2 of
- * Embedded Cross Trigger Revision: r0p0
- */
-#define		CTICONTROL		0x000
-#define		CTISTATUS		0x004
-#define		CTILOCK			0x008
-#define		CTIPROTECTION		0x00C
-#define		CTIINTACK		0x010
-#define		CTIAPPSET		0x014
-#define		CTIAPPCLEAR		0x018
-#define		CTIAPPPULSE		0x01c
-#define		CTIINEN			0x020
-#define		CTIOUTEN		0x0A0
-#define		CTITRIGINSTATUS		0x130
-#define		CTITRIGOUTSTATUS	0x134
-#define		CTICHINSTATUS		0x138
-#define		CTICHOUTSTATUS		0x13c
-#define		CTIPERIPHID0		0xFE0
-#define		CTIPERIPHID1		0xFE4
-#define		CTIPERIPHID2		0xFE8
-#define		CTIPERIPHID3		0xFEC
-#define		CTIPCELLID0		0xFF0
-#define		CTIPCELLID1		0xFF4
-#define		CTIPCELLID2		0xFF8
-#define		CTIPCELLID3		0xFFC
-
-/* The below are from section 3.6.4 of
- * CoreSight v1.0 Architecture Specification
- */
-#define		LOCKACCESS		0xFB0
-#define		LOCKSTATUS		0xFB4
-
-/**
- * struct cti - cross trigger interface struct
- * @base: mapped virtual address for the cti base
- * @irq: irq number for the cti
- * @trig_out_for_irq: triger out number which will cause
- *	the @irq happen
- *
- * cti struct used to operate cti registers.
- */
-struct cti {
-	void __iomem *base;
-	int irq;
-	int trig_out_for_irq;
-};
-
-/**
- * cti_init - initialize the cti instance
- * @cti: cti instance
- * @base: mapped virtual address for the cti base
- * @irq: irq number for the cti
- * @trig_out: triger out number which will cause
- *	the @irq happen
- *
- * called by machine code to pass the board dependent
- * @base, @irq and @trig_out to cti.
- */
-static inline void cti_init(struct cti *cti,
-	void __iomem *base, int irq, int trig_out)
-{
-	cti->base = base;
-	cti->irq  = irq;
-	cti->trig_out_for_irq = trig_out;
-}
-
-/**
- * cti_map_trigger - use the @chan to map @trig_in to @trig_out
- * @cti: cti instance
- * @trig_in: trigger in number
- * @trig_out: trigger out number
- * @channel: channel number
- *
- * This function maps one trigger in of @trig_in to one trigger
- * out of @trig_out using the channel @chan.
- */
-static inline void cti_map_trigger(struct cti *cti,
-	int trig_in, int trig_out, int chan)
-{
-	void __iomem *base = cti->base;
-	unsigned long val;
-
-	val = __raw_readl(base + CTIINEN + trig_in * 4);
-	val |= BIT(chan);
-	__raw_writel(val, base + CTIINEN + trig_in * 4);
-
-	val = __raw_readl(base + CTIOUTEN + trig_out * 4);
-	val |= BIT(chan);
-	__raw_writel(val, base + CTIOUTEN + trig_out * 4);
-}
-
-/**
- * cti_enable - enable the cti module
- * @cti: cti instance
- *
- * enable the cti module
- */
-static inline void cti_enable(struct cti *cti)
-{
-	__raw_writel(0x1, cti->base + CTICONTROL);
-}
-
-/**
- * cti_disable - disable the cti module
- * @cti: cti instance
- *
- * enable the cti module
- */
-static inline void cti_disable(struct cti *cti)
-{
-	__raw_writel(0, cti->base + CTICONTROL);
-}
-
-/**
- * cti_irq_ack - clear the cti irq
- * @cti: cti instance
- *
- * clear the cti irq
- */
-static inline void cti_irq_ack(struct cti *cti)
-{
-	void __iomem *base = cti->base;
-	unsigned long val;
-
-	val = __raw_readl(base + CTIINTACK);
-	val |= BIT(cti->trig_out_for_irq);
-	__raw_writel(val, base + CTIINTACK);
-}
-
-/**
- * cti_unlock - unlock cti module
- * @cti: cti instance
- *
- * unlock the cti module, or else any writes to the cti
- * module is not allowed.
- */
-static inline void cti_unlock(struct cti *cti)
-{
-	__raw_writel(CS_LAR_KEY, cti->base + LOCKACCESS);
-}
-
-/**
- * cti_lock - lock cti module
- * @cti: cti instance
- *
- * lock the cti module, so any writes to the cti
- * module will be not allowed.
- */
-static inline void cti_lock(struct cti *cti)
-{
-	__raw_writel(~CS_LAR_KEY, cti->base + LOCKACCESS);
-}
-#endif
diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h
index 4befe8d2ae19..7cbe001bf9cc 100644
--- a/arch/arm/include/asm/ecard.h
+++ b/arch/arm/include/asm/ecard.h
@@ -195,7 +195,7 @@ void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
 			   unsigned long offset, unsigned long maxsize);
 #define ecardm_iounmap(__ec, __addr)	devm_iounmap(&(__ec)->dev, __addr)
 
-extern struct bus_type ecard_bus_type;
+extern const struct bus_type ecard_bus_type;
 
 #define ECARD_DEV(_d)	container_of((_d), struct expansion_card, dev)
 
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
index e1cb04ed5008..e579f77162e9 100644
--- a/arch/arm/include/asm/floppy.h
+++ b/arch/arm/include/asm/floppy.h
@@ -65,8 +65,6 @@ static unsigned char floppy_selects[4] = { 0x10, 0x21, 0x23, 0x33 };
 #define N_FDC 1
 #define N_DRIVE 4
 
-#define CROSS_64KB(a,s) (0)
-
 /*
  * This allows people to reverse the order of
  * fd0 and fd1, in case their hardware is
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index a815f39b4243..90b6a832108d 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -368,7 +368,7 @@
 
 
 
-extern struct bus_type sa1111_bus_type;
+extern const struct bus_type sa1111_bus_type;
 
 #define SA1111_DEVID_SBI	(1 << 0)
 #define SA1111_DEVID_SK		(1 << 1)
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index b4b66220952d..bdb209e002a4 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -46,9 +46,9 @@ extern pte_t *pkmap_page_table;
 #endif
 
 #ifdef ARCH_NEEDS_KMAP_HIGH_GET
-extern void *kmap_high_get(struct page *page);
+extern void *kmap_high_get(const struct page *page);
 
-static inline void *arch_kmap_local_high_get(struct page *page)
+static inline void *arch_kmap_local_high_get(const struct page *page)
 {
 	if (IS_ENABLED(CONFIG_DEBUG_HIGHMEM) && !cache_is_vivt())
 		return NULL;
@@ -57,7 +57,7 @@ static inline void *arch_kmap_local_high_get(struct page *page)
 #define arch_kmap_local_high_get arch_kmap_local_high_get
 
 #else /* ARCH_NEEDS_KMAP_HIGH_GET */
-static inline void *kmap_high_get(struct page *page)
+static inline void *kmap_high_get(const struct page *page)
 {
 	return NULL;
 }
diff --git a/arch/arm/include/asm/hugetlb.h b/arch/arm/include/asm/hugetlb.h
index b766c4b373f6..700055b1ccb3 100644
--- a/arch/arm/include/asm/hugetlb.h
+++ b/arch/arm/include/asm/hugetlb.h
@@ -17,7 +17,7 @@
 
 static inline void arch_clear_hugetlb_flags(struct folio *folio)
 {
-	clear_bit(PG_dcache_clean, &folio->flags);
+	clear_bit(PG_dcache_clean, &folio->flags.f);
 }
 #define arch_clear_hugetlb_flags arch_clear_hugetlb_flags
 
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 1815748f5d2a..bae5edf348ef 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -381,7 +381,7 @@ void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
 void iounmap(volatile void __iomem *io_addr);
 #define iounmap iounmap
 
-void *arch_memremap_wb(phys_addr_t phys_addr, size_t size);
+void *arch_memremap_wb(phys_addr_t phys_addr, size_t size, unsigned long flags);
 #define arch_memremap_wb arch_memremap_wb
 
 /*
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index fa5939eb9864..7b71a3d414b7 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -209,7 +209,6 @@ PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
 
 #define pmd_pfn(pmd)		(((pmd_val(pmd) & PMD_MASK) & PHYS_MASK) >> PAGE_SHIFT)
 #define pfn_pmd(pfn,prot)	(__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
-#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
 /* No hardware dirty/accessed bits -- generic_pmdp_establish() fits */
 #define pmdp_establish generic_pmdp_establish
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index be91e376df79..86378eec7757 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -19,14 +19,13 @@ extern struct page *empty_zero_page;
 #define ZERO_PAGE(vaddr)	(empty_zero_page)
 #endif
 
-#ifndef CONFIG_MMU
-
 #include <asm-generic/pgtable-nopud.h>
+
+#ifndef CONFIG_MMU
 #include <asm/pgtable-nommu.h>
 
 #else
 
-#include <asm-generic/pgtable-nopud.h>
 #include <asm/page.h>
 #include <asm/pgtable-hwdef.h>
 
@@ -169,7 +168,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 #define pfn_pte(pfn,prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
 
 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page), prot)
 
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
@@ -303,7 +301,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(swp)	__pte((swp).val)
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_isset(pte, L_PTE_SWP_EXCLUSIVE);
 }
diff --git a/arch/arm/include/asm/simd.h b/arch/arm/include/asm/simd.h
index 82191dbd7e78..8549fa8b7253 100644
--- a/arch/arm/include/asm/simd.h
+++ b/arch/arm/include/asm/simd.h
@@ -1,8 +1,22 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_SIMD_H
+#define _ASM_SIMD_H
 
-#include <linux/hardirq.h>
+#include <linux/cleanup.h>
+#include <linux/compiler_attributes.h>
+#include <linux/preempt.h>
+#include <linux/types.h>
+
+#include <asm/neon.h>
 
 static __must_check inline bool may_use_simd(void)
 {
-	return IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && !in_hardirq();
+	return IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && !in_hardirq()
+	       && !irqs_disabled();
 }
+
+DEFINE_LOCK_GUARD_0(ksimd, kernel_neon_begin(), kernel_neon_end())
+
+#define scoped_ksimd()	scoped_guard(ksimd)
+
+#endif	/* _ASM_SIMD_H */
diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
index f80a85b091d6..ba2f771cca23 100644
--- a/arch/arm/include/asm/stacktrace.h
+++ b/arch/arm/include/asm/stacktrace.h
@@ -2,8 +2,9 @@
 #ifndef __ASM_STACKTRACE_H
 #define __ASM_STACKTRACE_H
 
-#include <asm/ptrace.h>
 #include <linux/llist.h>
+#include <asm/ptrace.h>
+#include <asm/sections.h>
 
 struct stackframe {
 	/*
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h
index fe4326d938c1..18b102a30741 100644
--- a/arch/arm/include/asm/syscall.h
+++ b/arch/arm/include/asm/syscall.h
@@ -68,6 +68,30 @@ static inline void syscall_set_return_value(struct task_struct *task,
 	regs->ARM_r0 = (long) error ? error : val;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	if (nr == -1) {
+		task_thread_info(task)->abi_syscall = -1;
+		/*
+		 * When the syscall number is set to -1, the syscall will be
+		 * skipped.  In this case the syscall return value has to be
+		 * set explicitly, otherwise the first syscall argument is
+		 * returned as the syscall return value.
+		 */
+		syscall_set_return_value(task, regs, -ENOSYS, 0);
+		return;
+	}
+	if ((IS_ENABLED(CONFIG_AEABI) && !IS_ENABLED(CONFIG_OABI_COMPAT))) {
+		task_thread_info(task)->abi_syscall = nr;
+		return;
+	}
+	task_thread_info(task)->abi_syscall =
+		(task_thread_info(task)->abi_syscall & ~__NR_SYSCALL_MASK) |
+		(nr & __NR_SYSCALL_MASK);
+}
+
 #define SYSCALL_MAX_ARGS 7
 
 static inline void syscall_get_arguments(struct task_struct *task,
@@ -80,6 +104,19 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	memcpy(args, &regs->ARM_r0 + 1, 5 * sizeof(args[0]));
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 const unsigned long *args)
+{
+	memcpy(&regs->ARM_r0, args, 6 * sizeof(args[0]));
+	/*
+	 * Also copy the first argument into ARM_ORIG_r0
+	 * so that syscall_get_arguments() would return it
+	 * instead of the previous value.
+	 */
+	regs->ARM_ORIG_r0 = regs->ARM_r0;
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	/* ARM tasks don't change audit architectures on the fly. */
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index f40d06ad5d2a..ea4fbe7b17f6 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -26,14 +26,7 @@
 
 #else /* !CONFIG_MMU */
 
-#include <linux/swap.h>
 #include <asm/tlbflush.h>
-
-static inline void __tlb_remove_table(void *_table)
-{
-	free_page_and_swap_cache((struct page *)_table);
-}
-
 #include <asm-generic/tlb.h>
 
 static inline void
@@ -41,8 +34,6 @@ __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr)
 {
 	struct ptdesc *ptdesc = page_ptdesc(pte);
 
-	pagetable_pte_dtor(ptdesc);
-
 #ifndef CONFIG_ARM_LPAE
 	/*
 	 * With the classic ARM MMU, a pte page has two corresponding pmd
@@ -61,7 +52,6 @@ __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr)
 #ifdef CONFIG_ARM_LPAE
 	struct ptdesc *ptdesc = virt_to_ptdesc(pmdp);
 
-	pagetable_pmd_dtor(ptdesc);
 	tlb_remove_ptdesc(tlb, ptdesc);
 #endif
 }
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index f90be312418e..d6ae80b5df36 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -283,10 +283,17 @@ extern int __put_user_8(void *, unsigned long long);
 	__gu_err;							\
 })
 
+/*
+ * This is a type: either unsigned long, if the argument fits into
+ * that type, or otherwise unsigned long long.
+ */
+#define __long_type(x) \
+	__typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL))
+
 #define __get_user_err(x, ptr, err, __t)				\
 do {									\
 	unsigned long __gu_addr = (unsigned long)(ptr);			\
-	unsigned long __gu_val;						\
+	__long_type(x) __gu_val;					\
 	unsigned int __ua_flags;					\
 	__chk_user_ptr(ptr);						\
 	might_fault();							\
@@ -295,6 +302,7 @@ do {									\
 	case 1:	__get_user_asm_byte(__gu_val, __gu_addr, err, __t); break;	\
 	case 2:	__get_user_asm_half(__gu_val, __gu_addr, err, __t); break;	\
 	case 4:	__get_user_asm_word(__gu_val, __gu_addr, err, __t); break;	\
+	case 8:	__get_user_asm_dword(__gu_val, __gu_addr, err, __t); break;	\
 	default: (__gu_val) = __get_user_bad();				\
 	}								\
 	uaccess_restore(__ua_flags);					\
@@ -353,6 +361,22 @@ do {									\
 #define __get_user_asm_word(x, addr, err, __t)			\
 	__get_user_asm(x, addr, err, "ldr" __t)
 
+#ifdef __ARMEB__
+#define __WORD0_OFFS	4
+#define __WORD1_OFFS	0
+#else
+#define __WORD0_OFFS	0
+#define __WORD1_OFFS	4
+#endif
+
+#define __get_user_asm_dword(x, addr, err, __t)				\
+	({								\
+	unsigned long __w0, __w1;					\
+	__get_user_asm(__w0, addr + __WORD0_OFFS, err, "ldr" __t);	\
+	__get_user_asm(__w1, addr + __WORD1_OFFS, err, "ldr" __t);	\
+	(x) = ((u64)__w1 << 32) | (u64) __w0;				\
+})
+
 #define __put_user_switch(x, ptr, __err, __fn)				\
 	do {								\
 		const __typeof__(*(ptr)) __user *__pu_ptr = (ptr);	\
diff --git a/arch/arm/include/asm/vdso.h b/arch/arm/include/asm/vdso.h
index 5b85889f82ee..88364a6727ff 100644
--- a/arch/arm/include/asm/vdso.h
+++ b/arch/arm/include/asm/vdso.h
@@ -4,6 +4,8 @@
 
 #ifdef __KERNEL__
 
+#define __VDSO_PAGES	4
+
 #ifndef __ASSEMBLY__
 
 struct mm_struct;
diff --git a/arch/arm/include/asm/vdso/gettimeofday.h b/arch/arm/include/asm/vdso/gettimeofday.h
index 592d3d015ca7..1e9f81639c88 100644
--- a/arch/arm/include/asm/vdso/gettimeofday.h
+++ b/arch/arm/include/asm/vdso/gettimeofday.h
@@ -112,7 +112,7 @@ static inline bool arm_vdso_hres_capable(void)
 #define __arch_vdso_hres_capable arm_vdso_hres_capable
 
 static __always_inline u64 __arch_get_hw_counter(int clock_mode,
-						 const struct vdso_data *vd)
+						 const struct vdso_time_data *vd)
 {
 #ifdef CONFIG_ARM_ARCH_TIMER
 	u64 cycle_now;
@@ -135,11 +135,6 @@ static __always_inline u64 __arch_get_hw_counter(int clock_mode,
 #endif
 }
 
-static __always_inline const struct vdso_data *__arch_get_vdso_data(void)
-{
-	return _vdso_data;
-}
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/arm/include/asm/vdso/vsyscall.h b/arch/arm/include/asm/vdso/vsyscall.h
index 705414710dcd..ff1c729af05f 100644
--- a/arch/arm/include/asm/vdso/vsyscall.h
+++ b/arch/arm/include/asm/vdso/vsyscall.h
@@ -7,22 +7,12 @@
 #include <vdso/datapage.h>
 #include <asm/cacheflush.h>
 
-extern struct vdso_data *vdso_data;
-extern bool cntvct_ok;
-
-static __always_inline
-struct vdso_data *__arm_get_k_vdso_data(void)
-{
-	return vdso_data;
-}
-#define __arch_get_k_vdso_data __arm_get_k_vdso_data
-
 static __always_inline
-void __arm_sync_vdso_data(struct vdso_data *vdata)
+void __arch_sync_vdso_time_data(struct vdso_time_data *vdata)
 {
 	flush_dcache_page(virt_to_page(vdata));
 }
-#define __arch_sync_vdso_data __arm_sync_vdso_data
+#define __arch_sync_vdso_time_data __arch_sync_vdso_time_data
 
 /* The asm-generic header needs to be included after the definitions above */
 #include <asm-generic/vdso/vsyscall.h>
diff --git a/arch/arm/include/asm/vfp.h b/arch/arm/include/asm/vfp.h
index 157ea3426158..85ccc422d4d0 100644
--- a/arch/arm/include/asm/vfp.h
+++ b/arch/arm/include/asm/vfp.h
@@ -9,16 +9,6 @@
 #ifndef __ASM_VFP_H
 #define __ASM_VFP_H
 
-#ifndef CONFIG_AS_VFP_VMRS_FPINST
-#define FPSID			cr0
-#define FPSCR			cr1
-#define MVFR1			cr6
-#define MVFR0			cr7
-#define FPEXC			cr8
-#define FPINST			cr9
-#define FPINST2			cr10
-#endif
-
 /* FPSID bits */
 #define FPSID_IMPLEMENTER_BIT	(24)
 #define FPSID_IMPLEMENTER_MASK	(0xff << FPSID_IMPLEMENTER_BIT)
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index ba0d4cb5377e..e2e1d5a3727a 100644
--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -8,7 +8,6 @@
 
 #include <asm/vfp.h>
 
-#ifdef CONFIG_AS_VFP_VMRS_FPINST
 	.macro	VFPFMRX, rd, sysreg, cond
 	vmrs\cond	\rd, \sysreg
 	.endm
@@ -16,16 +15,6 @@
 	.macro	VFPFMXR, sysreg, rd, cond
 	vmsr\cond	\sysreg, \rd
 	.endm
-#else
-	@ Macros to allow building with old toolkits (with no VFP support)
-	.macro	VFPFMRX, rd, sysreg, cond
-	MRC\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMRX	\rd, \sysreg
-	.endm
-
-	.macro	VFPFMXR, sysreg, rd, cond
-	MCR\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMXR	\sysreg, \rd
-	.endm
-#endif
 
 	@ read all the working registers back into the VFP
 	.macro	VFPFLDMIA, base, tmp
diff --git a/arch/arm/include/asm/vmlinux.lds.h b/arch/arm/include/asm/vmlinux.lds.h
index d60f6e83a9f7..0341973e30e1 100644
--- a/arch/arm/include/asm/vmlinux.lds.h
+++ b/arch/arm/include/asm/vmlinux.lds.h
@@ -19,7 +19,7 @@
 #endif
 
 #ifdef CONFIG_MMU
-#define ARM_MMU_KEEP(x)		x
+#define ARM_MMU_KEEP(x)		KEEP(x)
 #define ARM_MMU_DISCARD(x)
 #else
 #define ARM_MMU_KEEP(x)
@@ -34,6 +34,12 @@
 #define NOCROSSREFS
 #endif
 
+#ifdef CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY
+#define OVERLAY_KEEP(x)		KEEP(x)
+#else
+#define OVERLAY_KEEP(x)		x
+#endif
+
 /* Set start/end symbol names to the LMA for the section */
 #define ARM_LMA(sym, section)						\
 	sym##_start = LOADADDR(section);				\
@@ -125,13 +131,13 @@
 	__vectors_lma = .;						\
 	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
 		.vectors {						\
-			*(.vectors)					\
+			OVERLAY_KEEP(*(.vectors))			\
 		}							\
 		.vectors.bhb.loop8 {					\
-			*(.vectors.bhb.loop8)				\
+			OVERLAY_KEEP(*(.vectors.bhb.loop8))		\
 		}							\
 		.vectors.bhb.bpiall {					\
-			*(.vectors.bhb.bpiall)				\
+			OVERLAY_KEEP(*(.vectors.bhb.bpiall))		\
 		}							\
 	}								\
 	ARM_LMA(__vectors, .vectors);					\
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index aaae31b8c4a5..afc9de7ef9a1 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -40,6 +40,7 @@ obj-y		+= entry-armv.o
 endif
 
 obj-$(CONFIG_MMU)		+= bugs.o
+obj-$(CONFIG_OF)		+= cacheinfo.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
@@ -103,4 +104,4 @@ obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
 
 obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o
 
-extra-y := vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 4853875740d0..2101938d27fc 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -7,6 +7,8 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
+
 #include <linux/compiler.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -153,10 +155,6 @@ int main(void)
   DEFINE(CACHE_WRITEBACK_ORDER, __CACHE_WRITEBACK_ORDER);
   DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE);
   BLANK();
-#ifdef CONFIG_VDSO
-  DEFINE(VDSO_DATA_SIZE,	sizeof(union vdso_data_store));
-#endif
-  BLANK();
 #ifdef CONFIG_ARM_MPU
   DEFINE(MPU_RNG_INFO_RNGS,	offsetof(struct mpu_rgn_info, rgns));
   DEFINE(MPU_RNG_INFO_USED,	offsetof(struct mpu_rgn_info, used));
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index d334c7fb672b..b5793e8fbdc1 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/string_choices.h>
 #include <linux/init.h>
 #include <linux/io.h>
 
@@ -337,8 +338,8 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 	/*
 	 * Report what we did for this bus
 	 */
-	pr_info("PCI: bus%d: Fast back to back transfers %sabled\n",
-		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
+	pr_info("PCI: bus%d: Fast back to back transfers %s\n",
+		bus->number, str_enabled_disabled(features & PCI_COMMAND_FAST_BACK));
 }
 EXPORT_SYMBOL(pcibios_fixup_bus);
 
diff --git a/arch/arm/kernel/cacheinfo.c b/arch/arm/kernel/cacheinfo.c
new file mode 100644
index 000000000000..e1469b641780
--- /dev/null
+++ b/arch/arm/kernel/cacheinfo.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ARM cacheinfo support
+ *
+ *  Copyright (C) 2023 Linaro Ltd.
+ *  Copyright (C) 2015 ARM Ltd.
+ *  All Rights Reserved
+ */
+
+#include <linux/bitfield.h>
+#include <linux/cacheinfo.h>
+#include <linux/of.h>
+
+#include <asm/cachetype.h>
+#include <asm/cputype.h>
+#include <asm/system_info.h>
+
+/* Ctypen, bits[3(n - 1) + 2 : 3(n - 1)], for n = 1 to 7 */
+#define CLIDR_CTYPE_SHIFT(level)	(3 * (level - 1))
+#define CLIDR_CTYPE_MASK(level)		(7 << CLIDR_CTYPE_SHIFT(level))
+#define CLIDR_CTYPE(clidr, level)	\
+	(((clidr) & CLIDR_CTYPE_MASK(level)) >> CLIDR_CTYPE_SHIFT(level))
+
+#define MAX_CACHE_LEVEL			7	/* Max 7 level supported */
+
+#define CTR_FORMAT_MASK	GENMASK(31, 29)
+#define CTR_FORMAT_ARMV6 0
+#define CTR_FORMAT_ARMV7 4
+#define CTR_CWG_MASK	GENMASK(27, 24)
+#define CTR_DSIZE_LEN_MASK GENMASK(13, 12)
+#define CTR_ISIZE_LEN_MASK GENMASK(1, 0)
+
+/* Also valid for v7m */
+static inline int cache_line_size_cp15(void)
+{
+	u32 ctr = read_cpuid_cachetype();
+	u32 format = FIELD_GET(CTR_FORMAT_MASK, ctr);
+
+	if (format == CTR_FORMAT_ARMV7) {
+		u32 cwg = FIELD_GET(CTR_CWG_MASK, ctr);
+
+		return cwg ? 4 << cwg : ARCH_DMA_MINALIGN;
+	} else if (WARN_ON_ONCE(format != CTR_FORMAT_ARMV6)) {
+		return ARCH_DMA_MINALIGN;
+	}
+
+	return 8 << max(FIELD_GET(CTR_ISIZE_LEN_MASK, ctr),
+			FIELD_GET(CTR_DSIZE_LEN_MASK, ctr));
+}
+
+int cache_line_size(void)
+{
+	if (coherency_max_size != 0)
+		return coherency_max_size;
+
+	/* CP15 is optional / implementation defined before ARMv6 */
+	if (cpu_architecture() < CPU_ARCH_ARMv6)
+		return ARCH_DMA_MINALIGN;
+
+	return cache_line_size_cp15();
+}
+EXPORT_SYMBOL_GPL(cache_line_size);
+
+static inline enum cache_type get_cache_type(int level)
+{
+	u32 clidr;
+
+	if (level > MAX_CACHE_LEVEL)
+		return CACHE_TYPE_NOCACHE;
+
+	clidr = read_clidr();
+
+	return CLIDR_CTYPE(clidr, level);
+}
+
+static void ci_leaf_init(struct cacheinfo *this_leaf,
+			 enum cache_type type, unsigned int level)
+{
+	this_leaf->level = level;
+	this_leaf->type = type;
+}
+
+static int detect_cache_level(unsigned int *level_p, unsigned int *leaves_p)
+{
+	unsigned int ctype, level, leaves;
+	u32 ctr, format;
+
+	/* CLIDR is not present before ARMv7/v7m */
+	if (cpu_architecture() < CPU_ARCH_ARMv7)
+		return -EOPNOTSUPP;
+
+	/* Don't try reading CLIDR if CTR declares old format */
+	ctr = read_cpuid_cachetype();
+	format = FIELD_GET(CTR_FORMAT_MASK, ctr);
+	if (format != CTR_FORMAT_ARMV7)
+		return -EOPNOTSUPP;
+
+	for (level = 1, leaves = 0; level <= MAX_CACHE_LEVEL; level++) {
+		ctype = get_cache_type(level);
+		if (ctype == CACHE_TYPE_NOCACHE) {
+			level--;
+			break;
+		}
+		/* Separate instruction and data caches */
+		leaves += (ctype == CACHE_TYPE_SEPARATE) ? 2 : 1;
+	}
+
+	*level_p = level;
+	*leaves_p = leaves;
+
+	return 0;
+}
+
+int early_cache_level(unsigned int cpu)
+{
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+
+	return detect_cache_level(&this_cpu_ci->num_levels, &this_cpu_ci->num_leaves);
+}
+
+int init_cache_level(unsigned int cpu)
+{
+	unsigned int level, leaves;
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+	int fw_level;
+	int ret;
+
+	ret = detect_cache_level(&level, &leaves);
+	if (ret)
+		return ret;
+
+	fw_level = of_find_last_cache_level(cpu);
+
+	if (level < fw_level) {
+		/*
+		 * some external caches not specified in CLIDR_EL1
+		 * the information may be available in the device tree
+		 * only unified external caches are considered here
+		 */
+		leaves += (fw_level - level);
+		level = fw_level;
+	}
+
+	this_cpu_ci->num_levels = level;
+	this_cpu_ci->num_leaves = leaves;
+	return 0;
+}
+
+int populate_cache_leaves(unsigned int cpu)
+{
+	unsigned int level, idx;
+	enum cache_type type;
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
+	unsigned int arch = cpu_architecture();
+
+	/* CLIDR is not present before ARMv7/v7m */
+	if (arch < CPU_ARCH_ARMv7)
+		return -EOPNOTSUPP;
+
+	for (idx = 0, level = 1; level <= this_cpu_ci->num_levels &&
+	     idx < this_cpu_ci->num_leaves; idx++, level++) {
+		type = get_cache_type(level);
+		if (type == CACHE_TYPE_SEPARATE) {
+			ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level);
+			ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level);
+		} else {
+			ci_leaf_init(this_leaf++, type, level);
+		}
+	}
+
+	return 0;
+}
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index f379c852dcb7..88336a1292bb 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -119,7 +119,7 @@ no_work_pending:
 
 	ct_user_enter save = 0
 
-#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
+#ifdef CONFIG_KSTACK_ERASE
 	bl	stackleak_erase_on_task_stack
 #endif
 	restore_user_regs fast = 0, offset = 0
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index bc598e3d8dd2..e24ee559af81 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -257,11 +257,21 @@ ENDPROC(ftrace_graph_regs_caller)
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(return_to_handler)
-	stmdb	sp!, {r0-r3}
-	add	r0, sp, #16		@ sp at exit of instrumented routine
+	mov	ip, sp				@ sp at exit of instrumented routine
+	sub	sp, #PT_REGS_SIZE
+	str	r0, [sp, #S_R0]
+	str	r1, [sp, #S_R1]
+	str	r2, [sp, #S_R2]
+	str	r3, [sp, #S_R3]
+	str	ip, [sp, #S_FP]
+	mov	r0, sp
 	bl	ftrace_return_to_handler
-	mov	lr, r0			@ r0 has real ret addr
-	ldmia	sp!, {r0-r3}
+	mov	lr, r0				@ r0 has real ret addr
+	ldr	r3, [sp, #S_R3]
+	ldr	r2, [sp, #S_R2]
+	ldr	r1, [sp, #S_R1]
+	ldr	r0, [sp, #S_R0]
+	add	sp, sp, #PT_REGS_SIZE		@ restore stack pointer
 	ret	lr
 ENDPROC(return_to_handler)
 #endif
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index a12efd0f43e8..cd4b34c96e35 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -904,7 +904,7 @@ unlock:
 	watchpoint_single_step_handler(addr);
 }
 
-#ifdef CONFIG_CFI_CLANG
+#ifdef CONFIG_CFI
 static void hw_breakpoint_cfi_handler(struct pt_regs *regs)
 {
 	/*
diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c
index 905b1b191546..db8be609fab2 100644
--- a/arch/arm/kernel/isa.c
+++ b/arch/arm/kernel/isa.c
@@ -16,7 +16,7 @@
 
 static unsigned int isa_membase, isa_portbase, isa_portshift;
 
-static struct ctl_table ctl_isa_vars[] = {
+static const struct ctl_table ctl_isa_vars[] = {
 	{
 		.procname	= "membase",
 		.data		= &isa_membase, 
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 80ceb5bd2680..dd430477e7c1 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -127,29 +127,6 @@ void crash_smp_send_stop(void)
 	cpus_stopped = 1;
 }
 
-static void machine_kexec_mask_interrupts(void)
-{
-	unsigned int i;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(i, desc) {
-		struct irq_chip *chip;
-
-		chip = irq_desc_get_chip(desc);
-		if (!chip)
-			continue;
-
-		if (chip->irq_eoi && irqd_irq_inprogress(&desc->irq_data))
-			chip->irq_eoi(&desc->irq_data);
-
-		if (chip->irq_mask)
-			chip->irq_mask(&desc->irq_data);
-
-		if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data))
-			chip->irq_disable(&desc->irq_data);
-	}
-}
-
 void machine_crash_shutdown(struct pt_regs *regs)
 {
 	local_irq_disable();
diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c
index da2ee8d6ef1a..354ce16d83cb 100644
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -285,11 +285,9 @@ bool in_module_plt(unsigned long loc)
 	struct module *mod;
 	bool ret;
 
-	preempt_disable();
+	guard(rcu)();
 	mod = __module_text_address(loc);
 	ret = mod && (loc - (u32)mod->arch.core.plt_ent < mod->arch.core.plt_count * PLT_ENT_SIZE ||
 		      loc - (u32)mod->arch.init.plt_ent < mod->arch.init.plt_count * PLT_ENT_SIZE);
-	preempt_enable();
-
 	return ret;
 }
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index da488d92e7a0..55ca3fcd37e8 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -484,7 +484,7 @@ module_arch_cleanup(struct module *mod)
 #endif
 }
 
-void __weak module_arch_freeing_init(struct module *mod)
+void module_arch_freeing_init(struct module *mod)
 {
 #ifdef CONFIG_ARM_UNWIND
 	struct unwind_table *init = mod->arch.init_table;
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index e16ed102960c..d7aa95225c70 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -234,7 +234,7 @@ asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long stack_start = args->stack;
 	unsigned long tls = args->tls;
 	struct thread_info *thread = task_thread_info(p);
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index c421a899fc84..7951b2c06fec 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -677,7 +677,7 @@ enum arm_regset {
 
 static const struct user_regset arm_regsets[] = {
 	[REGSET_GPR] = {
-		.core_note_type = NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n = ELF_NGREG,
 		.size = sizeof(u32),
 		.align = sizeof(u32),
@@ -689,7 +689,7 @@ static const struct user_regset arm_regsets[] = {
 		 * For the FPA regs in fpstate, the real fields are a mixture
 		 * of sizes, so pretend that the registers are word-sized:
 		 */
-		.core_note_type = NT_PRFPREG,
+		USER_REGSET_NOTE_TYPE(PRFPREG),
 		.n = sizeof(struct user_fp) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
@@ -702,7 +702,7 @@ static const struct user_regset arm_regsets[] = {
 		 * Pretend that the VFP regs are word-sized, since the FPSCR is
 		 * a single word dangling at the end of struct user_vfp:
 		 */
-		.core_note_type = NT_ARM_VFP,
+		USER_REGSET_NOTE_TYPE(ARM_VFP),
 		.n = ARM_VFPREGS_SIZE / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index e6a857bf0ce6..0bfd66c7ada0 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -880,10 +880,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 		 */
 		boot_alias_start = phys_to_idmap(start);
 		if (arm_has_idmap_alias() && boot_alias_start != IDMAP_INVALID_ADDR) {
-			res = memblock_alloc(sizeof(*res), SMP_CACHE_BYTES);
-			if (!res)
-				panic("%s: Failed to allocate %zu bytes\n",
-				      __func__, sizeof(*res));
+			res = memblock_alloc_or_panic(sizeof(*res), SMP_CACHE_BYTES);
 			res->name = "System RAM (boot alias)";
 			res->start = boot_alias_start;
 			res->end = phys_to_idmap(res_end);
@@ -891,10 +888,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 			request_resource(&iomem_resource, res);
 		}
 
-		res = memblock_alloc(sizeof(*res), SMP_CACHE_BYTES);
-		if (!res)
-			panic("%s: Failed to allocate %zu bytes\n", __func__,
-			      sizeof(*res));
+		res = memblock_alloc_or_panic(sizeof(*res), SMP_CACHE_BYTES);
 		res->name  = "System RAM";
 		res->start = start;
 		res->end = res_end;
@@ -1010,7 +1004,7 @@ static void __init reserve_crashkernel(void)
 	total_mem = get_total_mem();
 	ret = parse_crashkernel(boot_command_line, total_mem,
 				&crash_size, &crash_base,
-				NULL, NULL);
+				NULL, NULL, NULL);
 	/* invalid value specified or crashkernel=0 */
 	if (ret || !crash_size)
 		return;
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 3431c0553f45..50999886a8b5 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -551,7 +551,8 @@ void show_ipi_list(struct seq_file *p, int prec)
 		if (!ipi_desc[i])
 			continue;
 
-		seq_printf(p, "%*s%u: ", prec - 1, "IPI", i);
+		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
+			   prec >= 4 ? " " : "");
 
 		for_each_online_cpu(cpu)
 			seq_printf(p, "%10u ", irq_desc_kstat_cpu(ipi_desc[i], cpu));
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 6ea645939573..afbd2ebe5c39 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -258,13 +258,6 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 	barrier();
 }
 
-#ifdef CONFIG_PREEMPT
-#define S_PREEMPT " PREEMPT"
-#elif defined(CONFIG_PREEMPT_RT)
-#define S_PREEMPT " PREEMPT_RT"
-#else
-#define S_PREEMPT ""
-#endif
 #ifdef CONFIG_SMP
 #define S_SMP " SMP"
 #else
@@ -282,8 +275,8 @@ static int __die(const char *str, int err, struct pt_regs *regs)
 	static int die_counter;
 	int ret;
 
-	pr_emerg("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP S_ISA "\n",
-	         str, err, ++die_counter);
+	pr_emerg("Internal error: %s: %x [#%d]" S_SMP S_ISA "\n",
+		 str, err, ++die_counter);
 
 	/* trap and error numbers are mostly meaningless on ARM */
 	ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c
index 29dd2f3c62fe..e38a30477f3d 100644
--- a/arch/arm/kernel/vdso.c
+++ b/arch/arm/kernel/vdso.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/cache.h>
+#include <linux/vdso_datastore.h>
 #include <linux/elf.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
@@ -33,15 +34,6 @@ extern char vdso_start[], vdso_end[];
 /* Total number of pages needed for the data and text portions of the VDSO. */
 unsigned int vdso_total_pages __ro_after_init;
 
-static union vdso_data_store vdso_data_store __page_aligned_data;
-struct vdso_data *vdso_data = vdso_data_store.data;
-
-static struct page *vdso_data_page __ro_after_init;
-static const struct vm_special_mapping vdso_data_mapping = {
-	.name = "[vvar]",
-	.pages = &vdso_data_page,
-};
-
 static int vdso_mremap(const struct vm_special_mapping *sm,
 		struct vm_area_struct *new_vma)
 {
@@ -62,11 +54,9 @@ struct elfinfo {
 	char		*dynstr;	/* ptr to .dynstr section */
 };
 
-/* Cached result of boot-time check for whether the arch timer exists,
- * and if so, whether the virtual counter is useable.
+/* Boot-time check for whether the arch timer exists, and if so,
+ * whether the virtual counter is usable.
  */
-bool cntvct_ok __ro_after_init;
-
 static bool __init cntvct_functional(void)
 {
 	struct device_node *np;
@@ -167,7 +157,7 @@ static void __init patch_vdso(void *ehdr)
 	 * want programs to incur the slight additional overhead of
 	 * dispatching through the VDSO only to fall back to syscalls.
 	 */
-	if (!cntvct_ok) {
+	if (!cntvct_functional()) {
 		vdso_nullpatch_one(&einfo, "__vdso_gettimeofday");
 		vdso_nullpatch_one(&einfo, "__vdso_clock_gettime");
 		vdso_nullpatch_one(&einfo, "__vdso_clock_gettime64");
@@ -192,9 +182,6 @@ static int __init vdso_init(void)
 	if (vdso_text_pagelist == NULL)
 		return -ENOMEM;
 
-	/* Grab the VDSO data page. */
-	vdso_data_page = virt_to_page(vdso_data);
-
 	/* Grab the VDSO text pages. */
 	for (i = 0; i < text_pages; i++) {
 		struct page *page;
@@ -205,27 +192,16 @@ static int __init vdso_init(void)
 
 	vdso_text_mapping.pages = vdso_text_pagelist;
 
-	vdso_total_pages = 1; /* for the data/vvar page */
+	vdso_total_pages = VDSO_NR_PAGES; /* for the data/vvar pages */
 	vdso_total_pages += text_pages;
 
-	cntvct_ok = cntvct_functional();
-
 	patch_vdso(vdso_start);
 
 	return 0;
 }
 arch_initcall(vdso_init);
 
-static int install_vvar(struct mm_struct *mm, unsigned long addr)
-{
-	struct vm_area_struct *vma;
-
-	vma = _install_special_mapping(mm, addr, PAGE_SIZE,
-				       VM_READ | VM_MAYREAD,
-				       &vdso_data_mapping);
-
-	return PTR_ERR_OR_ZERO(vma);
-}
+static_assert(__VDSO_PAGES == VDSO_NR_PAGES);
 
 /* assumes mmap_lock is write-locked */
 void arm_install_vdso(struct mm_struct *mm, unsigned long addr)
@@ -238,12 +214,12 @@ void arm_install_vdso(struct mm_struct *mm, unsigned long addr)
 	if (vdso_text_pagelist == NULL)
 		return;
 
-	if (install_vvar(mm, addr))
+	if (IS_ERR(vdso_install_vvar_mapping(mm, addr)))
 		return;
 
-	/* Account for vvar page. */
-	addr += PAGE_SIZE;
-	len = (vdso_total_pages - 1) << PAGE_SHIFT;
+	/* Account for vvar pages. */
+	addr += VDSO_NR_PAGES * PAGE_SIZE;
+	len = (vdso_total_pages - VDSO_NR_PAGES) << PAGE_SHIFT;
 
 	vma = _install_special_mapping(mm, addr, len,
 		VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S
index 5eddb75a7174..f2e8d4fac068 100644
--- a/arch/arm/kernel/vmlinux-xip.lds.S
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -63,7 +63,7 @@ SECTIONS
 	. = ALIGN(4);
 	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
 		__start___ex_table = .;
-		ARM_MMU_KEEP(KEEP(*(__ex_table)))
+		ARM_MMU_KEEP(*(__ex_table))
 		__stop___ex_table = .;
 	}
 
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index de373c6c2ae8..d592a203f9c6 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -74,7 +74,7 @@ SECTIONS
 	. = ALIGN(4);
 	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
 		__start___ex_table = .;
-		ARM_MMU_KEEP(KEEP(*(__ex_table)))
+		ARM_MMU_KEEP(*(__ex_table))
 		__stop___ex_table = .;
 	}
 
diff --git a/arch/arm/lib/.gitignore b/arch/arm/lib/.gitignore
new file mode 100644
index 000000000000..647d7a922e68
--- /dev/null
+++ b/arch/arm/lib/.gitignore
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# This now-removed directory used to contain generated files.
+/crypto/
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index 080019aa6fcd..fcf287edd0e5 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -2,7 +2,6 @@
 menuconfig ARCH_ASPEED
 	bool "Aspeed BMC architectures"
 	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7
-	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG
 	select MFD_SYSCON
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 344f5305f69a..c5ef27e3cd8f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
+config ARCH_MICROCHIP
+	bool
+
 menuconfig ARCH_AT91
 	bool "AT91/Microchip SoCs"
 	depends on (CPU_LITTLE_ENDIAN && (ARCH_MULTI_V4T || ARCH_MULTI_V5)) || \
@@ -8,6 +11,7 @@ menuconfig ARCH_AT91
 	select GPIOLIB
 	select PINCTRL
 	select SOC_BUS
+	select ARCH_MICROCHIP
 
 if ARCH_AT91
 config SOC_SAMV7
@@ -58,6 +62,17 @@ config SOC_SAMA5D4
 	help
 	  Select this if you are using one of Microchip's SAMA5D4 family SoC.
 
+config SOC_SAMA7D65
+	bool "SAMA7D65 family"
+	depends on ARCH_MULTI_V7
+	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_SAM9X60_PLL
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_UTMI
+	select SOC_SAMA7
+	help
+	  Select this if you are using one of Microchip's SAMA7D65 family SoC.
+
 config SOC_SAMA7G5
 	bool "SAMA7G5 family"
 	depends on ARCH_MULTI_V7
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index b9b995f8a36e..35058b99069c 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -222,13 +222,16 @@ static const struct of_device_id sam9x60_ws_ids[] = {
 	{ /* sentinel */ }
 };
 
-static const struct of_device_id sama7g5_ws_ids[] = {
+static const struct of_device_id sama7_ws_ids[] = {
+	{ .compatible = "microchip,sama7d65-rtc",	.data = &ws_info[1] },
 	{ .compatible = "microchip,sama7g5-rtc",	.data = &ws_info[1] },
 	{ .compatible = "microchip,sama7g5-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
+	{ .compatible = "microchip,sama7d65-sdhci",	.data = &ws_info[3] },
 	{ .compatible = "microchip,sama7g5-sdhci",	.data = &ws_info[3] },
+	{ .compatible = "microchip,sama7d65-rtt",	.data = &ws_info[4] },
 	{ .compatible = "microchip,sama7g5-rtt",	.data = &ws_info[4] },
 	{ /* sentinel */ }
 };
@@ -545,11 +548,12 @@ extern u32 at91_pm_suspend_in_sram_sz;
 
 static int at91_suspend_finish(unsigned long val)
 {
-	unsigned char modified_gray_code[] = {
-		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
-		0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
-		0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
-		0x10, 0x11,
+	/* SYNOPSYS workaround to fix a bug in the calibration logic */
+	unsigned char modified_fix_code[] = {
+		0x00, 0x01, 0x01, 0x06, 0x07, 0x0c, 0x06, 0x07, 0x0b, 0x18,
+		0x0a, 0x0b, 0x0c, 0x0d, 0x0d, 0x0a, 0x13, 0x13, 0x12, 0x13,
+		0x14, 0x15, 0x15, 0x12, 0x18, 0x19, 0x19, 0x1e, 0x1f, 0x14,
+		0x1e, 0x1f,
 	};
 	unsigned int tmp, index;
 	int i;
@@ -560,25 +564,25 @@ static int at91_suspend_finish(unsigned long val)
 		 * restore the ZQ0SR0 with the value saved here. But the
 		 * calibration is buggy and restoring some values from ZQ0SR0
 		 * is forbidden and risky thus we need to provide processed
-		 * values for these (modified gray code values).
+		 * values for these.
 		 */
 		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
 
 		/* Store pull-down output impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] = modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDO_OFF;
 
 		/* Store pull-up output impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PUO_OFF;
 
 		/* Store pull-down on-die termination impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDODT_OFF;
 
 		/* Store pull-up on-die termination impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SRO_PUODT_OFF;
 
 		/*
 		 * The 1st 8 words of memory might get corrupted in the process
@@ -598,7 +602,21 @@ static int at91_suspend_finish(unsigned long val)
 	return 0;
 }
 
-static void at91_pm_switch_ba_to_vbat(void)
+/**
+ * at91_pm_switch_ba_to_auto() - Configure Backup Unit Power Switch
+ * to automatic/hardware mode.
+ *
+ * The Backup Unit Power Switch can be managed either by software or hardware.
+ * Enabling hardware mode allows the automatic transition of power between
+ * VDDANA (or VDDIN33) and VDDBU (or VBAT, respectively), based on the
+ * availability of these power sources.
+ *
+ * If the Backup Unit Power Switch is already in automatic mode, no action is
+ * required. If it is in software-controlled mode, it is switched to automatic
+ * mode to enhance safety and eliminate the need for toggling between power
+ * sources.
+ */
+static void at91_pm_switch_ba_to_auto(void)
 {
 	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
 	unsigned int val;
@@ -609,24 +627,19 @@ static void at91_pm_switch_ba_to_vbat(void)
 
 	val = readl(soc_pm.data.sfrbu + offset);
 
-	/* Already on VBAT. */
-	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
+	/* Already on auto/hardware. */
+	if (!(val & soc_pm.sfrbu_regs.pswbu.ctrl))
 		return;
 
-	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
-	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
+	val &= ~soc_pm.sfrbu_regs.pswbu.ctrl;
+	val |= soc_pm.sfrbu_regs.pswbu.key;
 	writel(val, soc_pm.data.sfrbu + offset);
-
-	/* Wait for update. */
-	val = readl(soc_pm.data.sfrbu + offset);
-	while (val & soc_pm.sfrbu_regs.pswbu.state)
-		val = readl(soc_pm.data.sfrbu + offset);
 }
 
 static void at91_pm_suspend(suspend_state_t state)
 {
 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
-		at91_pm_switch_ba_to_vbat();
+		at91_pm_switch_ba_to_auto();
 
 		cpu_suspend(0, at91_suspend_finish);
 
@@ -634,6 +647,11 @@ static void at91_pm_suspend(suspend_state_t state)
 		at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
 					     &at91_pm_suspend_in_sram,
 					     at91_pm_suspend_in_sram_sz);
+
+		if (IS_ENABLED(CONFIG_SOC_SAMA7D65)) {
+			/* SHDWC.SR */
+			readl(soc_pm.data.shdwc + 0x08);
+		}
 	} else {
 		at91_suspend_finish(0);
 	}
@@ -1052,7 +1070,8 @@ static int __init at91_pm_backup_init(void)
 	int ret = -ENODEV, located = 0;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) &&
-	    !IS_ENABLED(CONFIG_SOC_SAMA7G5))
+	    !IS_ENABLED(CONFIG_SOC_SAMA7G5) &&
+	    !IS_ENABLED(CONFIG_SOC_SAMA7D65))
 		return -EPERM;
 
 	if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
@@ -1320,6 +1339,7 @@ struct pmc_info {
 	unsigned long uhp_udp_mask;
 	unsigned long mckr;
 	unsigned long version;
+	unsigned long mcks;
 };
 
 static const struct pmc_info pmc_infos[] __initconst = {
@@ -1344,15 +1364,21 @@ static const struct pmc_info pmc_infos[] __initconst = {
 		.version = AT91_PMC_V1,
 	},
 	{
-		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
 		.mckr = 0x28,
 		.version = AT91_PMC_V2,
 	},
 	{
 		.mckr = 0x28,
 		.version = AT91_PMC_V2,
+		.mcks = 4,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
+		.mckr = 0x28,
+		.version = AT91_PMC_V2,
+		.mcks = 9,
 	},
-
 };
 
 static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -1369,6 +1395,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
 	{ .compatible = "microchip,sam9x7-pmc", .data = &pmc_infos[4] },
+	{ .compatible = "microchip,sama7d65-pmc", .data = &pmc_infos[6] },
 	{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
 	{ /* sentinel */ },
 };
@@ -1439,6 +1466,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 	soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
 	soc_pm.data.pmc_mckr_offset = pmc->mckr;
 	soc_pm.data.pmc_version = pmc->version;
+	soc_pm.data.pmc_mcks = pmc->mcks;
 
 	if (pm_idle)
 		arm_pm_idle = pm_idle;
@@ -1662,7 +1690,7 @@ void __init sama7_pm_init(void)
 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
 	at91_pm_init(NULL);
 
-	soc_pm.ws_ids = sama7g5_ws_ids;
+	soc_pm.ws_ids = sama7_ws_ids;
 	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
 
 	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 53bdc9000e44..50c3a425d140 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -39,6 +39,7 @@ struct at91_pm_data {
 	unsigned int suspend_mode;
 	unsigned int pmc_mckr_offset;
 	unsigned int pmc_version;
+	unsigned int pmc_mcks;
 };
 #endif
 
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index 40bd4e8fe40a..0ca5da66dc26 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -18,6 +18,8 @@ int main(void)
 						 pmc_mckr_offset));
 	DEFINE(PM_DATA_PMC_VERSION,	offsetof(struct at91_pm_data,
 						 pmc_version));
+	DEFINE(PM_DATA_PMC_MCKS,	offsetof(struct at91_pm_data,
+						 pmc_mcks));
 
 	return 0;
 }
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index e5869cca5e79..2e639f9ed648 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -87,29 +87,6 @@ tmp3	.req	r6
 
 	.endm
 
-/**
- * Set state for 2.5V low power regulator
- * @ena: 0 - disable regulator
- *	 1 - enable regulator
- *
- * Side effects: overwrites r7, r8, r9, r10
- */
-	.macro at91_2_5V_reg_set_low_power ena
-#ifdef CONFIG_SOC_SAMA7
-	ldr	r7, .sfrbu
-	mov	r8, #\ena
-	ldr	r9, [r7, #AT91_SFRBU_25LDOCR]
-	orr	r9, r9, #AT91_SFRBU_25LDOCR_LP
-	cmp	r8, #1
-	beq	lp_done_\ena
-	bic	r9, r9, #AT91_SFRBU_25LDOCR_LP
-lp_done_\ena:
-	ldr	r10, =AT91_SFRBU_25LDOCR_LDOANAKEY
-	orr	r9, r9, r10
-	str	r9, [r7, #AT91_SFRBU_25LDOCR]
-#endif
-	.endm
-
 	.macro at91_backup_set_lpm reg
 #ifdef CONFIG_SOC_SAMA7
 	orr	\reg, \reg, #0x200000
@@ -689,6 +666,10 @@ sr_dis_exit:
 	bic	tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
 	str	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
 
+	/* save acr */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_ACR]
+	str	tmp2, .saved_acr
+
 	/* save div. */
 	mov	tmp1, #0
 	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL0]
@@ -758,7 +739,7 @@ sr_dis_exit:
 	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
 
 	/* step 2. */
-	ldr	tmp1, =AT91_PMC_PLL_ACR_DEFAULT_PLLA
+	ldr	tmp1, .saved_acr
 	str	tmp1, [pmc, #AT91_PMC_PLL_ACR]
 
 	/* step 3. */
@@ -814,18 +795,20 @@ sr_dis_exit:
 .endm
 
 /**
- * at91_mckx_ps_enable:	save MCK1..4 settings and switch it to main clock
+ * at91_mckx_ps_enable:	save MCK settings and switch it to main clock
  *
- * Side effects: overwrites tmp1, tmp2
+ * Side effects: overwrites tmp1, tmp2, tmp3
  */
 .macro at91_mckx_ps_enable
 #ifdef CONFIG_SOC_SAMA7
 	ldr	pmc, .pmc_base
+	ldr	tmp3, .mcks
 
-	/* There are 4 MCKs we need to handle: MCK1..4 */
+	/* Start at MCK1 and go until MCKs */
 	mov	tmp1, #1
-e_loop:	cmp	tmp1, #5
-	beq	e_done
+e_loop:
+	cmp	tmp1, tmp3
+	bgt	e_done
 
 	/* Write MCK ID to retrieve the settings. */
 	str	tmp1, [pmc, #AT91_PMC_MCR_V2]
@@ -850,7 +833,37 @@ e_save_mck3:
 	b	e_ps
 
 e_save_mck4:
+	cmp	tmp1, #4
+	bne	e_save_mck5
 	str	tmp2, .saved_mck4
+	b	e_ps
+
+e_save_mck5:
+	cmp	tmp1, #5
+	bne	e_save_mck6
+	str	tmp2, .saved_mck5
+	b	e_ps
+
+e_save_mck6:
+	cmp	tmp1, #6
+	bne	e_save_mck7
+	str	tmp2, .saved_mck6
+	b	e_ps
+
+e_save_mck7:
+	cmp	tmp1, #7
+	bne	e_save_mck8
+	str	tmp2, .saved_mck7
+	b	e_ps
+
+e_save_mck8:
+	cmp	tmp1, #8
+	bne	e_save_mck9
+	str	tmp2, .saved_mck8
+	b	e_ps
+
+e_save_mck9:
+	str	tmp2, .saved_mck9
 
 e_ps:
 	/* Use CSS=MAINCK and DIV=1. */
@@ -870,18 +883,20 @@ e_done:
 .endm
 
 /**
- * at91_mckx_ps_restore: restore MCK1..4 settings
+ * at91_mckx_ps_restore: restore MCKx settings
  *
- * Side effects: overwrites tmp1, tmp2
+ * Side effects: overwrites tmp1, tmp2 and tmp3
  */
 .macro at91_mckx_ps_restore
 #ifdef CONFIG_SOC_SAMA7
 	ldr	pmc, .pmc_base
+	ldr	tmp2, .mcks
 
-	/* There are 4 MCKs we need to handle: MCK1..4 */
+	/* Start from MCK1 and go up to MCKs */
 	mov	tmp1, #1
-r_loop:	cmp	tmp1, #5
-	beq	r_done
+r_loop:
+	cmp	tmp1, tmp2
+	bgt	r_done
 
 r_save_mck1:
 	cmp	tmp1, #1
@@ -902,7 +917,37 @@ r_save_mck3:
 	b	r_ps
 
 r_save_mck4:
+	cmp	tmp1, #4
+	bne	r_save_mck5
 	ldr	tmp2, .saved_mck4
+	b	r_ps
+
+r_save_mck5:
+	cmp	tmp1, #5
+	bne	r_save_mck6
+	ldr	tmp2, .saved_mck5
+	b	r_ps
+
+r_save_mck6:
+	cmp	tmp1, #6
+	bne	r_save_mck7
+	ldr	tmp2, .saved_mck6
+	b	r_ps
+
+r_save_mck7:
+	cmp	tmp1, #7
+	bne	r_save_mck8
+	ldr	tmp2, .saved_mck7
+	b	r_ps
+
+r_save_mck8:
+	cmp	tmp1, #8
+	bne	r_save_mck9
+	ldr	tmp2, .saved_mck8
+	b	r_ps
+
+r_save_mck9:
+	ldr	tmp2, .saved_mck9
 
 r_ps:
 	/* Write MCK ID to retrieve the settings. */
@@ -916,11 +961,12 @@ r_ps:
 	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK
 	orr	tmp3, tmp3, tmp1
 	orr	tmp3, tmp3, #AT91_PMC_MCR_V2_CMD
-	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
+	str	tmp3, [pmc, #AT91_PMC_MCR_V2]
 
 	wait_mckrdy tmp1
 
 	add	tmp1, tmp1, #1
+	ldr	tmp2, .mcks
 	b	r_loop
 r_done:
 #endif
@@ -954,9 +1000,6 @@ save_mck:
 
 	at91_plla_disable
 
-	/* Enable low power mode for 2.5V regulator. */
-	at91_2_5V_reg_set_low_power 1
-
 	ldr	tmp3, .pm_mode
 	cmp	tmp3, #AT91_PM_ULP1
 	beq	ulp1_mode
@@ -969,9 +1012,6 @@ ulp1_mode:
 	b	ulp_exit
 
 ulp_exit:
-	/* Disable low power mode for 2.5V regulator. */
-	at91_2_5V_reg_set_low_power 0
-
 	ldr	pmc, .pmc_base
 
 	at91_plla_enable
@@ -1045,6 +1085,10 @@ ENTRY(at91_pm_suspend_in_sram)
 	str	tmp1, .memtype
 	ldr	tmp1, [r0, #PM_DATA_MODE]
 	str	tmp1, .pm_mode
+#ifdef CONFIG_SOC_SAMA7
+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKS]
+	str	tmp1, .mcks
+#endif
 
 	/*
 	 * ldrne below are here to preload their address in the TLB as access
@@ -1132,8 +1176,14 @@ ENDPROC(at91_pm_suspend_in_sram)
 	.word 0
 .pmc_version:
 	.word 0
+#ifdef CONFIG_SOC_SAMA7
+.mcks:
+	.word 0
+#endif
 .saved_mckr:
 	.word 0
+.saved_acr:
+	.word 0
 .saved_pllar:
 	.word 0
 .saved_sam9_lpr:
@@ -1155,6 +1205,16 @@ ENDPROC(at91_pm_suspend_in_sram)
 	.word 0
 .saved_mck4:
 	.word 0
+.saved_mck5:
+	.word 0
+.saved_mck6:
+	.word 0
+.saved_mck7:
+	.word 0
+.saved_mck8:
+	.word 0
+.saved_mck9:
+	.word 0
 #endif
 
 ENTRY(at91_pm_suspend_in_sram_sz)
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 2a8a9fe46586..6cd6d29a2c9d 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -4,6 +4,7 @@ menuconfig ARCH_DAVINCI
 	bool "TI DaVinci"
 	depends on ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
+	select ARCH_DAVINCI_DA850
 	select CPU_ARM926T
 	select DAVINCI_TIMER
 	select ZONE_DMA
@@ -18,15 +19,9 @@ if ARCH_DAVINCI
 
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI_DA830
-	bool "DA830/OMAP-L137/AM17x based system"
-	select ARCH_DAVINCI_DA8XX
-	# needed on silicon revs 1.0, 1.1:
-	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
-	select DAVINCI_CP_INTC
-
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
+	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
 
 config ARCH_DAVINCI_DA8XX
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 31d22a5d8e1e..7a210db669f4 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -10,7 +10,6 @@ obj-y 					:= common.o sram.o devices-da8xx.o
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o pdata-quirks.o
 
 obj-y					+= da8xx-dt.o
diff --git a/arch/arm/mach-davinci/cputype.h b/arch/arm/mach-davinci/cputype.h
index 148a738391dc..a8f5330aaad1 100644
--- a/arch/arm/mach-davinci/cputype.h
+++ b/arch/arm/mach-davinci/cputype.h
@@ -25,7 +25,6 @@ struct davinci_id {
 };
 
 /* Can use lower 16 bits of cpu id  for a variant when required */
-#define	DAVINCI_CPU_ID_DA830		0x08300000
 #define	DAVINCI_CPU_ID_DA850		0x08500000
 
 #endif
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
deleted file mode 100644
index 2e497745b624..000000000000
--- a/arch/arm/mach-davinci/da830.c
+++ /dev/null
@@ -1,507 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA830/OMAP L137 chip specific setup
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-cp-intc.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "da8xx.h"
-#include "irqs.h"
-#include "mux.h"
-
-/* Offsets of the 8 compare registers on the da830 */
-#define DA830_CMP12_0		0x60
-#define DA830_CMP12_1		0x64
-#define DA830_CMP12_2		0x68
-#define DA830_CMP12_3		0x6c
-#define DA830_CMP12_4		0x70
-#define DA830_CMP12_5		0x74
-#define DA830_CMP12_6		0x78
-#define DA830_CMP12_7		0x7c
-
-#define DA830_REF_FREQ		24000000
-
-/*
- * Device specific mux setup
- *
- *	     soc      description	mux    mode    mode   mux	dbg
- *					reg   offset   mask   mode
- */
-static const struct mux_config da830_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-	MUX_CFG(DA830, GPIO7_14,	0,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, RTCK,		0,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_15,	0,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMU_0,		0,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_SDCKE,	0,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_CLK_GLUE,	0,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_CLK,		0,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, NEMB_CS_0,	0,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_CAS,	0,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_RAS,	0,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE,		0,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_BA_1,	1,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_BA_0,	1,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_0,		1,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_1,		1,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_2,		1,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_3,		1,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_4,		1,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_5,		1,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO7_0,		1,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_1,		1,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_2,		1,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_3,		1,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_4,		1,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_5,		1,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_6,		1,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_7,		1,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_A_6,		2,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_7,		2,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_8,		2,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_9,		2,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_10,	2,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_11,	2,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_12,	2,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_31,	2,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO7_8,		2,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_9,		2,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_10,	2,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_11,	2,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_12,	2,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_13,	2,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_13,	2,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_30,	3,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_29,	3,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_28,	3,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_27,	3,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_26,	3,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_25,	3,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_24,	3,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_23,	3,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_22,	4,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_21,	4,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_20,	4,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_19,	4,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_18,	4,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_17,	4,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_16,	4,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_3,	4,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_2,	5,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_0,		5,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_1,		5,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_2,		5,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_3,		5,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_4,		5,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_5,		5,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_6,		5,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO6_0,		5,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_1,		5,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_2,		5,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_3,		5,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_4,		5,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_5,		5,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_6,		5,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_7,		6,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_8,		6,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_9,		6,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_10,	6,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_11,	6,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_12,	6,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_13,	6,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_14,	6,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO6_7,		6,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_8,		6,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_9,		6,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_10,	6,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_11,	6,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_12,	6,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_13,	6,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_14,	6,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_15,	7,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_1,	7,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_0,	7,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_SOMI_0,	7,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_SIMO_0,	7,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_CLK,	7,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI0_ENA,	7,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI0_SCS_0,	7,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EQEP0I,		7,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP0S,		7,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1I,		7,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NUART0_CTS,	7,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, NUART0_RTS,	7,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP0A,		7,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, EQEP0B,		7,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO6_15,	7,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_14,	7,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_15,	7,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_0,		7,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_1,		7,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_2,		7,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_3,		7,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_4,		7,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, SPI1_SOMI_0,	8,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI1_SIMO_0,	8,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI1_CLK,	8,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, UART0_RXD,	8,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, UART0_TXD,	8,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_10,		8,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_11,		8,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI1_ENA,	8,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, I2C1_SCL,	8,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C1_SDA,	8,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1S,		8,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C0_SDA,	8,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C0_SCL,	8,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, UART2_RXD,	8,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, TM64P0_IN12,	8,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, TM64P0_OUT12,	8,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO5_5,		8,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_6,		8,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_7,		8,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_8,		8,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_9,		8,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_10,	8,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_11,	8,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_12,	8,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, NSPI1_SCS_0,	9,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, USB0_DRVVBUS,	9,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKX0,		9,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKX0,		9,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSX0,		9,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKR0,		9,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKR0,		9,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSR0,		9,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, UART2_TXD,	9,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, AHCLKX2,		9,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, ECAP0_APWM0,	9,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_MHZ_50_CLK,	9,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, ECAP1_APWM1,	9,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, USB_REFCLKIN,	9,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO5_13,	9,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_15,	9,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_11,	9,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_12,	9,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_13,	9,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_14,	9,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_15,	9,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_12,	9,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AMUTE0,		10,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_0,		10,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_1,		10,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_2,		10,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_3,		10,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_4,		10,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_5,		10,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_6,		10,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, RMII_TXD_0,	10,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_TXD_1,	10,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_TXEN,	10,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_CRS_DV,	10,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXD_0,	10,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXD_1,	10,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXER,	10,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AFSR2,		10,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, ACLKX2,		10,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_3,		10,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_2,		10,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_1,		10,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, AFSX2,		10,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, ACLKR2,		10,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, NRESETOUT,	10,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_0,		10,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_1,		10,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_2,		10,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_3,		10,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_4,		10,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_5,		10,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_6,		10,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AXR0_7,		11,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_8,		11,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, UART1_RXD,	11,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, UART1_TXD,	11,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_11,		11,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKX1,		11,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKX1,		11,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSX1,		11,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MDIO_CLK,	11,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, MDIO_D,		11,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_9,		11,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_10,		11,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM0B,		11,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM0A,		11,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWMSYNCI,	11,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR2_0,		11,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, EPWMSYNC0,	11,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO3_7,		11,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_8,		11,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_9,		11,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_10,	11,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_11,	11,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_14,	11,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_15,	11,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_10,	11,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AHCLKR1,		12,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKR1,		12,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSR1,		12,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AMUTE1,		12,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_0,		12,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_1,		12,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_2,		12,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_3,		12,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, ECAP2_APWM2,	12,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EHRPWMGLUETZ,	12,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1A,		12,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, GPIO4_11,	12,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_12,	12,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_13,	12,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_14,	12,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_0,		12,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_1,		12,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_2,		12,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_3,		12,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AXR1_4,		13,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_5,		13,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_6,		13,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_7,		13,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_8,		13,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_9,		13,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_0,		13,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_1,		13,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EQEP1B,		13,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM2B,		13,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM2A,		13,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM1B,		13,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM1A,		13,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_0,	13,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_1,	13,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_0,	13,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_1,	13,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO4_4,		13,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_5,		13,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_6,		13,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_7,		13,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_8,		13,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_9,		13,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_0,		13,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_1,		13,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_D_2,		14,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_3,		14,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_4,		14,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_5,		14,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_6,		14,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_7,		14,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_8,		14,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_9,		14,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MMCSD_DAT_2,	14,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_3,	14,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_4,	14,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_5,	14,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_6,	14,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_7,	14,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_8,	14,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_9,	14,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_2,	14,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_3,	14,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_4,	14,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_5,	14,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_6,	14,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_7,	14,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_8,		14,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_9,		14,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO0_2,		14,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_3,		14,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_4,		14,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_5,		14,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_6,		14,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_7,		14,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_8,		14,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_9,		14,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_D_10,	15,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_11,	15,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_12,	15,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_13,	15,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_14,	15,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_15,	15,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_0,		15,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_1,		15,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, UHPI_HD_10,	15,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_11,	15,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_12,	15,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_13,	15,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_14,	15,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_15,	15,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_7,		15,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_CLK,	15,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_10,	15,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_11,	15,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_12,	15,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_13,	15,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_14,	15,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_15,	15,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HCNTL0,	15,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO0_10,	15,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_11,	15,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_12,	15,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_13,	15,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_14,	15,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_15,	15,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_0,		15,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_1,		15,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_A_2,		16,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_3,		16,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_4,		16,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_5,		16,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_6,		16,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_7,		16,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_8,		16,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_9,		16,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MMCSD_CMD,	16,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_6,		16,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_3,		16,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_2,		16,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_1,		16,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_0,		16,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_PCLK,	16,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_HSYNC,	16,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HCNTL1,	16,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO1_2,		16,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_3,		16,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_4,		16,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_5,		16,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_6,		16,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_7,		16,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_8,		16,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_9,		16,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_A_10,	17,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_11,	17,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_12,	17,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_BA_1,	17,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_BA_0,	17,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_CLK,		17,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_SDCKE,	17,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CAS,	17,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, LCD_VSYNC,	17,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, NLCD_AC_ENB_CS,	17,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_MCLK,	17,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_5,		17,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_4,		17,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, OBSCLK,		17,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NEMA_CS_4,	17,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HHWIL,	17,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, AHCLKR2,		17,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO1_10,	17,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_11,	17,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_12,	17,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_13,	17,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_14,	17,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_15,	17,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_0,		17,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_1,		17,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, NEMA_RAS,	18,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE,		18,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_0,	18,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_2,	18,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_3,	18,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_OE,		18,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE_DQM_1,	18,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE_DQM_0,	18,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_5,	18,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HRNW,	18,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HAS,	18,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HCS,	18,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HDS1,	18,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HDS2,	18,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HINT,	18,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_12,		18,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, AMUTE2,		18,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_13,		18,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_14,		18,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_15,		18,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO2_2,		18,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_3,		18,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_4,		18,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_5,		18,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_6,		18,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_7,		18,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_8,		18,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_9,		18,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_WAIT_0,	19,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NUHPI_HRDY,	19,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, GPIO2_10,	19,	0,	0xf,	8,	false)
-#endif
-};
-
-static struct map_desc da830_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= DA8XX_CP_INTC_VIRT,
-		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
-		.length		= DA8XX_CP_INTC_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id da830_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,	/* 0x02f >> 1 */
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev1.0",
-	},
-	{
-		.variant	= 0x8,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev1.1",
-	},
-	{
-		.variant	= 0x9,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev2.0",
-	},
-};
-
-static const struct davinci_soc_info davinci_soc_info_da830 = {
-	.io_desc		= da830_io_desc,
-	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
-	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
-	.ids			= da830_ids,
-	.ids_num		= ARRAY_SIZE(da830_ids),
-	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
-	.pinmux_pins		= da830_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
-};
-
-void __init da830_init(void)
-{
-	davinci_common_init(&davinci_soc_info_da830);
-
-	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
-	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
-}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 287dd987908e..706f8241b5e7 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -4,7 +4,6 @@
  *
  * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
  *
- * Derived from: arch/arm/mach-davinci/da830.c
  * Original Copyrights follow:
  *
  * 2009 (c) MontaVista Software, Inc.
diff --git a/arch/arm/mach-davinci/da8xx.h b/arch/arm/mach-davinci/da8xx.h
index 54a255b8d8d8..70d14f7f3520 100644
--- a/arch/arm/mach-davinci/da8xx.h
+++ b/arch/arm/mach-davinci/da8xx.h
@@ -68,8 +68,6 @@ extern void __iomem *da8xx_syscfg1_base;
 #define DA8XX_SHARED_RAM_BASE	0x80000000
 #define DA8XX_ARM_RAM_BASE	0xffff0000
 
-void da830_init(void);
-
 void da850_init(void);
 
 int da850_register_vpif_display
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 5e73a725d5da..4e9ac55ae92d 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -33,7 +33,6 @@
 #define DA8XX_PRUSS_MEM_BASE		0x01c30000
 #define DA8XX_MMCSD0_BASE		0x01c40000
 #define DA8XX_SPI0_BASE			0x01c41000
-#define DA830_SPI1_BASE			0x01e12000
 #define DA8XX_LCD_CNTRL_BASE		0x01e13000
 #define DA850_SATA_BASE			0x01e18000
 #define DA850_MMCSD1_BASE		0x01e1b000
diff --git a/arch/arm/mach-davinci/irqs.h b/arch/arm/mach-davinci/irqs.h
index b1ceed81e9fa..23e8da5025ab 100644
--- a/arch/arm/mach-davinci/irqs.h
+++ b/arch/arm/mach-davinci/irqs.h
@@ -101,33 +101,6 @@
 #define IRQ_DA8XX_ECAP2			71
 #define IRQ_DA8XX_ARMCLKSTOPREQ		90
 
-/* DA830 specific interrupts */
-#define IRQ_DA830_MPUERR		27
-#define IRQ_DA830_IOPUERR		27
-#define IRQ_DA830_BOOTCFGERR		27
-#define IRQ_DA830_EHRPWM2		67
-#define IRQ_DA830_EHRPWM2TZ		68
-#define IRQ_DA830_EQEP0			72
-#define IRQ_DA830_EQEP1			73
-#define IRQ_DA830_T12CMPINT0_0		74
-#define IRQ_DA830_T12CMPINT1_0		75
-#define IRQ_DA830_T12CMPINT2_0		76
-#define IRQ_DA830_T12CMPINT3_0		77
-#define IRQ_DA830_T12CMPINT4_0		78
-#define IRQ_DA830_T12CMPINT5_0		79
-#define IRQ_DA830_T12CMPINT6_0		80
-#define IRQ_DA830_T12CMPINT7_0		81
-#define IRQ_DA830_T12CMPINT0_1		82
-#define IRQ_DA830_T12CMPINT1_1		83
-#define IRQ_DA830_T12CMPINT2_1		84
-#define IRQ_DA830_T12CMPINT3_1		85
-#define IRQ_DA830_T12CMPINT4_1		86
-#define IRQ_DA830_T12CMPINT5_1		87
-#define IRQ_DA830_T12CMPINT6_1		88
-#define IRQ_DA830_T12CMPINT7_1		89
-
-#define DA830_N_CP_INTC_IRQ		96
-
 /* DA850 speicific interrupts */
 #define IRQ_DA850_MPUADDRERR0		27
 #define IRQ_DA850_MPUPROTERR0		27
diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h
index 05fd3902df65..6325ea5a2730 100644
--- a/arch/arm/mach-davinci/mux.h
+++ b/arch/arm/mach-davinci/mux.h
@@ -21,410 +21,6 @@ struct mux_config {
 	bool debug;
 };
 
-enum da830_index {
-	DA830_GPIO7_14,
-	DA830_RTCK,
-	DA830_GPIO7_15,
-	DA830_EMU_0,
-	DA830_EMB_SDCKE,
-	DA830_EMB_CLK_GLUE,
-	DA830_EMB_CLK,
-	DA830_NEMB_CS_0,
-	DA830_NEMB_CAS,
-	DA830_NEMB_RAS,
-	DA830_NEMB_WE,
-	DA830_EMB_BA_1,
-	DA830_EMB_BA_0,
-	DA830_EMB_A_0,
-	DA830_EMB_A_1,
-	DA830_EMB_A_2,
-	DA830_EMB_A_3,
-	DA830_EMB_A_4,
-	DA830_EMB_A_5,
-	DA830_GPIO7_0,
-	DA830_GPIO7_1,
-	DA830_GPIO7_2,
-	DA830_GPIO7_3,
-	DA830_GPIO7_4,
-	DA830_GPIO7_5,
-	DA830_GPIO7_6,
-	DA830_GPIO7_7,
-	DA830_EMB_A_6,
-	DA830_EMB_A_7,
-	DA830_EMB_A_8,
-	DA830_EMB_A_9,
-	DA830_EMB_A_10,
-	DA830_EMB_A_11,
-	DA830_EMB_A_12,
-	DA830_EMB_D_31,
-	DA830_GPIO7_8,
-	DA830_GPIO7_9,
-	DA830_GPIO7_10,
-	DA830_GPIO7_11,
-	DA830_GPIO7_12,
-	DA830_GPIO7_13,
-	DA830_GPIO3_13,
-	DA830_EMB_D_30,
-	DA830_EMB_D_29,
-	DA830_EMB_D_28,
-	DA830_EMB_D_27,
-	DA830_EMB_D_26,
-	DA830_EMB_D_25,
-	DA830_EMB_D_24,
-	DA830_EMB_D_23,
-	DA830_EMB_D_22,
-	DA830_EMB_D_21,
-	DA830_EMB_D_20,
-	DA830_EMB_D_19,
-	DA830_EMB_D_18,
-	DA830_EMB_D_17,
-	DA830_EMB_D_16,
-	DA830_NEMB_WE_DQM_3,
-	DA830_NEMB_WE_DQM_2,
-	DA830_EMB_D_0,
-	DA830_EMB_D_1,
-	DA830_EMB_D_2,
-	DA830_EMB_D_3,
-	DA830_EMB_D_4,
-	DA830_EMB_D_5,
-	DA830_EMB_D_6,
-	DA830_GPIO6_0,
-	DA830_GPIO6_1,
-	DA830_GPIO6_2,
-	DA830_GPIO6_3,
-	DA830_GPIO6_4,
-	DA830_GPIO6_5,
-	DA830_GPIO6_6,
-	DA830_EMB_D_7,
-	DA830_EMB_D_8,
-	DA830_EMB_D_9,
-	DA830_EMB_D_10,
-	DA830_EMB_D_11,
-	DA830_EMB_D_12,
-	DA830_EMB_D_13,
-	DA830_EMB_D_14,
-	DA830_GPIO6_7,
-	DA830_GPIO6_8,
-	DA830_GPIO6_9,
-	DA830_GPIO6_10,
-	DA830_GPIO6_11,
-	DA830_GPIO6_12,
-	DA830_GPIO6_13,
-	DA830_GPIO6_14,
-	DA830_EMB_D_15,
-	DA830_NEMB_WE_DQM_1,
-	DA830_NEMB_WE_DQM_0,
-	DA830_SPI0_SOMI_0,
-	DA830_SPI0_SIMO_0,
-	DA830_SPI0_CLK,
-	DA830_NSPI0_ENA,
-	DA830_NSPI0_SCS_0,
-	DA830_EQEP0I,
-	DA830_EQEP0S,
-	DA830_EQEP1I,
-	DA830_NUART0_CTS,
-	DA830_NUART0_RTS,
-	DA830_EQEP0A,
-	DA830_EQEP0B,
-	DA830_GPIO6_15,
-	DA830_GPIO5_14,
-	DA830_GPIO5_15,
-	DA830_GPIO5_0,
-	DA830_GPIO5_1,
-	DA830_GPIO5_2,
-	DA830_GPIO5_3,
-	DA830_GPIO5_4,
-	DA830_SPI1_SOMI_0,
-	DA830_SPI1_SIMO_0,
-	DA830_SPI1_CLK,
-	DA830_UART0_RXD,
-	DA830_UART0_TXD,
-	DA830_AXR1_10,
-	DA830_AXR1_11,
-	DA830_NSPI1_ENA,
-	DA830_I2C1_SCL,
-	DA830_I2C1_SDA,
-	DA830_EQEP1S,
-	DA830_I2C0_SDA,
-	DA830_I2C0_SCL,
-	DA830_UART2_RXD,
-	DA830_TM64P0_IN12,
-	DA830_TM64P0_OUT12,
-	DA830_GPIO5_5,
-	DA830_GPIO5_6,
-	DA830_GPIO5_7,
-	DA830_GPIO5_8,
-	DA830_GPIO5_9,
-	DA830_GPIO5_10,
-	DA830_GPIO5_11,
-	DA830_GPIO5_12,
-	DA830_NSPI1_SCS_0,
-	DA830_USB0_DRVVBUS,
-	DA830_AHCLKX0,
-	DA830_ACLKX0,
-	DA830_AFSX0,
-	DA830_AHCLKR0,
-	DA830_ACLKR0,
-	DA830_AFSR0,
-	DA830_UART2_TXD,
-	DA830_AHCLKX2,
-	DA830_ECAP0_APWM0,
-	DA830_RMII_MHZ_50_CLK,
-	DA830_ECAP1_APWM1,
-	DA830_USB_REFCLKIN,
-	DA830_GPIO5_13,
-	DA830_GPIO4_15,
-	DA830_GPIO2_11,
-	DA830_GPIO2_12,
-	DA830_GPIO2_13,
-	DA830_GPIO2_14,
-	DA830_GPIO2_15,
-	DA830_GPIO3_12,
-	DA830_AMUTE0,
-	DA830_AXR0_0,
-	DA830_AXR0_1,
-	DA830_AXR0_2,
-	DA830_AXR0_3,
-	DA830_AXR0_4,
-	DA830_AXR0_5,
-	DA830_AXR0_6,
-	DA830_RMII_TXD_0,
-	DA830_RMII_TXD_1,
-	DA830_RMII_TXEN,
-	DA830_RMII_CRS_DV,
-	DA830_RMII_RXD_0,
-	DA830_RMII_RXD_1,
-	DA830_RMII_RXER,
-	DA830_AFSR2,
-	DA830_ACLKX2,
-	DA830_AXR2_3,
-	DA830_AXR2_2,
-	DA830_AXR2_1,
-	DA830_AFSX2,
-	DA830_ACLKR2,
-	DA830_NRESETOUT,
-	DA830_GPIO3_0,
-	DA830_GPIO3_1,
-	DA830_GPIO3_2,
-	DA830_GPIO3_3,
-	DA830_GPIO3_4,
-	DA830_GPIO3_5,
-	DA830_GPIO3_6,
-	DA830_AXR0_7,
-	DA830_AXR0_8,
-	DA830_UART1_RXD,
-	DA830_UART1_TXD,
-	DA830_AXR0_11,
-	DA830_AHCLKX1,
-	DA830_ACLKX1,
-	DA830_AFSX1,
-	DA830_MDIO_CLK,
-	DA830_MDIO_D,
-	DA830_AXR0_9,
-	DA830_AXR0_10,
-	DA830_EPWM0B,
-	DA830_EPWM0A,
-	DA830_EPWMSYNCI,
-	DA830_AXR2_0,
-	DA830_EPWMSYNC0,
-	DA830_GPIO3_7,
-	DA830_GPIO3_8,
-	DA830_GPIO3_9,
-	DA830_GPIO3_10,
-	DA830_GPIO3_11,
-	DA830_GPIO3_14,
-	DA830_GPIO3_15,
-	DA830_GPIO4_10,
-	DA830_AHCLKR1,
-	DA830_ACLKR1,
-	DA830_AFSR1,
-	DA830_AMUTE1,
-	DA830_AXR1_0,
-	DA830_AXR1_1,
-	DA830_AXR1_2,
-	DA830_AXR1_3,
-	DA830_ECAP2_APWM2,
-	DA830_EHRPWMGLUETZ,
-	DA830_EQEP1A,
-	DA830_GPIO4_11,
-	DA830_GPIO4_12,
-	DA830_GPIO4_13,
-	DA830_GPIO4_14,
-	DA830_GPIO4_0,
-	DA830_GPIO4_1,
-	DA830_GPIO4_2,
-	DA830_GPIO4_3,
-	DA830_AXR1_4,
-	DA830_AXR1_5,
-	DA830_AXR1_6,
-	DA830_AXR1_7,
-	DA830_AXR1_8,
-	DA830_AXR1_9,
-	DA830_EMA_D_0,
-	DA830_EMA_D_1,
-	DA830_EQEP1B,
-	DA830_EPWM2B,
-	DA830_EPWM2A,
-	DA830_EPWM1B,
-	DA830_EPWM1A,
-	DA830_MMCSD_DAT_0,
-	DA830_MMCSD_DAT_1,
-	DA830_UHPI_HD_0,
-	DA830_UHPI_HD_1,
-	DA830_GPIO4_4,
-	DA830_GPIO4_5,
-	DA830_GPIO4_6,
-	DA830_GPIO4_7,
-	DA830_GPIO4_8,
-	DA830_GPIO4_9,
-	DA830_GPIO0_0,
-	DA830_GPIO0_1,
-	DA830_EMA_D_2,
-	DA830_EMA_D_3,
-	DA830_EMA_D_4,
-	DA830_EMA_D_5,
-	DA830_EMA_D_6,
-	DA830_EMA_D_7,
-	DA830_EMA_D_8,
-	DA830_EMA_D_9,
-	DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3,
-	DA830_MMCSD_DAT_4,
-	DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6,
-	DA830_MMCSD_DAT_7,
-	DA830_UHPI_HD_8,
-	DA830_UHPI_HD_9,
-	DA830_UHPI_HD_2,
-	DA830_UHPI_HD_3,
-	DA830_UHPI_HD_4,
-	DA830_UHPI_HD_5,
-	DA830_UHPI_HD_6,
-	DA830_UHPI_HD_7,
-	DA830_LCD_D_8,
-	DA830_LCD_D_9,
-	DA830_GPIO0_2,
-	DA830_GPIO0_3,
-	DA830_GPIO0_4,
-	DA830_GPIO0_5,
-	DA830_GPIO0_6,
-	DA830_GPIO0_7,
-	DA830_GPIO0_8,
-	DA830_GPIO0_9,
-	DA830_EMA_D_10,
-	DA830_EMA_D_11,
-	DA830_EMA_D_12,
-	DA830_EMA_D_13,
-	DA830_EMA_D_14,
-	DA830_EMA_D_15,
-	DA830_EMA_A_0,
-	DA830_EMA_A_1,
-	DA830_UHPI_HD_10,
-	DA830_UHPI_HD_11,
-	DA830_UHPI_HD_12,
-	DA830_UHPI_HD_13,
-	DA830_UHPI_HD_14,
-	DA830_UHPI_HD_15,
-	DA830_LCD_D_7,
-	DA830_MMCSD_CLK,
-	DA830_LCD_D_10,
-	DA830_LCD_D_11,
-	DA830_LCD_D_12,
-	DA830_LCD_D_13,
-	DA830_LCD_D_14,
-	DA830_LCD_D_15,
-	DA830_UHPI_HCNTL0,
-	DA830_GPIO0_10,
-	DA830_GPIO0_11,
-	DA830_GPIO0_12,
-	DA830_GPIO0_13,
-	DA830_GPIO0_14,
-	DA830_GPIO0_15,
-	DA830_GPIO1_0,
-	DA830_GPIO1_1,
-	DA830_EMA_A_2,
-	DA830_EMA_A_3,
-	DA830_EMA_A_4,
-	DA830_EMA_A_5,
-	DA830_EMA_A_6,
-	DA830_EMA_A_7,
-	DA830_EMA_A_8,
-	DA830_EMA_A_9,
-	DA830_MMCSD_CMD,
-	DA830_LCD_D_6,
-	DA830_LCD_D_3,
-	DA830_LCD_D_2,
-	DA830_LCD_D_1,
-	DA830_LCD_D_0,
-	DA830_LCD_PCLK,
-	DA830_LCD_HSYNC,
-	DA830_UHPI_HCNTL1,
-	DA830_GPIO1_2,
-	DA830_GPIO1_3,
-	DA830_GPIO1_4,
-	DA830_GPIO1_5,
-	DA830_GPIO1_6,
-	DA830_GPIO1_7,
-	DA830_GPIO1_8,
-	DA830_GPIO1_9,
-	DA830_EMA_A_10,
-	DA830_EMA_A_11,
-	DA830_EMA_A_12,
-	DA830_EMA_BA_1,
-	DA830_EMA_BA_0,
-	DA830_EMA_CLK,
-	DA830_EMA_SDCKE,
-	DA830_NEMA_CAS,
-	DA830_LCD_VSYNC,
-	DA830_NLCD_AC_ENB_CS,
-	DA830_LCD_MCLK,
-	DA830_LCD_D_5,
-	DA830_LCD_D_4,
-	DA830_OBSCLK,
-	DA830_NEMA_CS_4,
-	DA830_UHPI_HHWIL,
-	DA830_AHCLKR2,
-	DA830_GPIO1_10,
-	DA830_GPIO1_11,
-	DA830_GPIO1_12,
-	DA830_GPIO1_13,
-	DA830_GPIO1_14,
-	DA830_GPIO1_15,
-	DA830_GPIO2_0,
-	DA830_GPIO2_1,
-	DA830_NEMA_RAS,
-	DA830_NEMA_WE,
-	DA830_NEMA_CS_0,
-	DA830_NEMA_CS_2,
-	DA830_NEMA_CS_3,
-	DA830_NEMA_OE,
-	DA830_NEMA_WE_DQM_1,
-	DA830_NEMA_WE_DQM_0,
-	DA830_NEMA_CS_5,
-	DA830_UHPI_HRNW,
-	DA830_NUHPI_HAS,
-	DA830_NUHPI_HCS,
-	DA830_NUHPI_HDS1,
-	DA830_NUHPI_HDS2,
-	DA830_NUHPI_HINT,
-	DA830_AXR0_12,
-	DA830_AMUTE2,
-	DA830_AXR0_13,
-	DA830_AXR0_14,
-	DA830_AXR0_15,
-	DA830_GPIO2_2,
-	DA830_GPIO2_3,
-	DA830_GPIO2_4,
-	DA830_GPIO2_5,
-	DA830_GPIO2_6,
-	DA830_GPIO2_7,
-	DA830_GPIO2_8,
-	DA830_GPIO2_9,
-	DA830_EMA_WAIT_0,
-	DA830_NUHPI_HRDY,
-	DA830_GPIO2_10,
-};
-
 enum davinci_da850_index {
 	/* UART0 function */
 	DA850_NUART0_CTS,
diff --git a/arch/arm/mach-davinci/psc.h b/arch/arm/mach-davinci/psc.h
index acfef063295f..6c365a2e87fe 100644
--- a/arch/arm/mach-davinci/psc.h
+++ b/arch/arm/mach-davinci/psc.h
@@ -97,9 +97,7 @@
 #define DA8XX_LPSC1_CPGMAC		5
 #define DA8XX_LPSC1_EMIF3C		6
 #define DA8XX_LPSC1_McASP0		7
-#define DA830_LPSC1_McASP1		8
 #define DA850_LPSC1_SATA		8
-#define DA830_LPSC1_McASP2		9
 #define DA850_LPSC1_VPIF		9
 #define DA8XX_LPSC1_SPI1		10
 #define DA8XX_LPSC1_I2C			11
@@ -111,7 +109,6 @@
 #define DA8XX_LPSC1_PWM			17
 #define DA850_LPSC1_MMC_SD1		18
 #define DA8XX_LPSC1_ECAP		20
-#define DA830_LPSC1_EQEP		21
 #define DA850_LPSC1_TPTC2		21
 #define DA8XX_LPSC1_SCR_P0_SS		24
 #define DA8XX_LPSC1_SCR_P1_SS		25
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index fd0dbeb93357..cb7d8a7b14e0 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -215,7 +215,7 @@ static const struct of_device_id exynos_dt_mcpm_match[] = {
 	{},
 };
 
-static void exynos_mcpm_setup_entry_point(void)
+static void exynos_mcpm_setup_entry_point(void *data)
 {
 	/*
 	 * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
@@ -228,10 +228,14 @@ static void exynos_mcpm_setup_entry_point(void)
 	__raw_writel(__pa_symbol(mcpm_entry_point), ns_sram_base_addr + 8);
 }
 
-static struct syscore_ops exynos_mcpm_syscore_ops = {
+static const struct syscore_ops exynos_mcpm_syscore_ops = {
 	.resume	= exynos_mcpm_setup_entry_point,
 };
 
+static struct syscore exynos_mcpm_syscore = {
+	.ops = &exynos_mcpm_syscore_ops,
+};
+
 static int __init exynos_mcpm_init(void)
 {
 	struct device_node *node;
@@ -300,9 +304,9 @@ static int __init exynos_mcpm_init(void)
 		pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i));
 	}
 
-	exynos_mcpm_setup_entry_point();
+	exynos_mcpm_setup_entry_point(NULL);
 
-	register_syscore_ops(&exynos_mcpm_syscore_ops);
+	register_syscore(&exynos_mcpm_syscore);
 
 	return ret;
 }
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index cac4e82f6c82..22d723553f62 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -53,9 +53,9 @@ struct exynos_pm_data {
 
 	void (*pm_prepare)(void);
 	void (*pm_resume_prepare)(void);
-	void (*pm_resume)(void);
-	int (*pm_suspend)(void);
 	int (*cpu_suspend)(unsigned long);
+
+	const struct syscore_ops *syscore_ops;
 };
 
 /* Used only on Exynos542x/5800 */
@@ -209,9 +209,8 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 		return -ENOMEM;
 	}
 
-	domain = irq_domain_add_hierarchy(parent_domain, 0, 0,
-					  node, &exynos_pmu_domain_ops,
-					  NULL);
+	domain = irq_domain_create_hierarchy(parent_domain, 0, 0, of_fwnode_handle(node),
+					     &exynos_pmu_domain_ops, NULL);
 	if (!domain) {
 		iounmap(pmu_base_addr);
 		pmu_base_addr = NULL;
@@ -377,7 +376,7 @@ static void exynos5420_pm_prepare(void)
 }
 
 
-static int exynos_pm_suspend(void)
+static int exynos_pm_suspend(void *data)
 {
 	exynos_pm_central_suspend();
 
@@ -391,7 +390,7 @@ static int exynos_pm_suspend(void)
 	return 0;
 }
 
-static int exynos5420_pm_suspend(void)
+static int exynos5420_pm_suspend(void *data)
 {
 	u32 this_cluster;
 
@@ -409,7 +408,7 @@ static int exynos5420_pm_suspend(void)
 	return 0;
 }
 
-static void exynos_pm_resume(void)
+static void exynos_pm_resume(void *data)
 {
 	u32 cpuid = read_cpuid_part();
 
@@ -430,7 +429,7 @@ early_wakeup:
 	exynos_set_delayed_reset_assertion(true);
 }
 
-static void exynos3250_pm_resume(void)
+static void exynos3250_pm_resume(void *data)
 {
 	u32 cpuid = read_cpuid_part();
 
@@ -474,7 +473,7 @@ static void exynos5420_prepare_pm_resume(void)
 	}
 }
 
-static void exynos5420_pm_resume(void)
+static void exynos5420_pm_resume(void *data)
 {
 	unsigned long tmp;
 
@@ -597,41 +596,52 @@ static const struct platform_suspend_ops exynos_suspend_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
+static const struct syscore_ops exynos3250_syscore_ops = {
+	.suspend = exynos_pm_suspend,
+	.resume = exynos3250_pm_resume,
+};
+
 static const struct exynos_pm_data exynos3250_pm_data = {
 	.wkup_irq	= exynos3250_wkup_irq,
 	.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
-	.pm_suspend	= exynos_pm_suspend,
-	.pm_resume	= exynos3250_pm_resume,
 	.pm_prepare	= exynos3250_pm_prepare,
 	.cpu_suspend	= exynos3250_cpu_suspend,
+	.syscore_ops	= &exynos3250_syscore_ops,
+};
+
+static const struct syscore_ops exynos_syscore_ops = {
+	.suspend = exynos_pm_suspend,
+	.resume = exynos_pm_resume,
 };
 
 static const struct exynos_pm_data exynos4_pm_data = {
 	.wkup_irq	= exynos4_wkup_irq,
 	.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
-	.pm_suspend	= exynos_pm_suspend,
-	.pm_resume	= exynos_pm_resume,
 	.pm_prepare	= exynos_pm_prepare,
 	.cpu_suspend	= exynos_cpu_suspend,
+	.syscore_ops	= &exynos_syscore_ops,
 };
 
 static const struct exynos_pm_data exynos5250_pm_data = {
 	.wkup_irq	= exynos5250_wkup_irq,
 	.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
-	.pm_suspend	= exynos_pm_suspend,
-	.pm_resume	= exynos_pm_resume,
 	.pm_prepare	= exynos_pm_prepare,
 	.cpu_suspend	= exynos_cpu_suspend,
+	.syscore_ops	= &exynos_syscore_ops,
+};
+
+static const struct syscore_ops exynos5420_syscore_ops = {
+	.resume = exynos5420_pm_resume,
+	.suspend = exynos5420_pm_suspend,
 };
 
 static const struct exynos_pm_data exynos5420_pm_data = {
 	.wkup_irq	= exynos5250_wkup_irq,
 	.wake_disable_mask = (0x7F << 7) | (0x1F << 1),
 	.pm_resume_prepare = exynos5420_prepare_pm_resume,
-	.pm_resume	= exynos5420_pm_resume,
-	.pm_suspend	= exynos5420_pm_suspend,
 	.pm_prepare	= exynos5420_pm_prepare,
 	.cpu_suspend	= exynos5420_cpu_suspend,
+	.syscore_ops	= &exynos5420_syscore_ops,
 };
 
 static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
@@ -657,7 +667,7 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
 	{ /*sentinel*/ },
 };
 
-static struct syscore_ops exynos_pm_syscore_ops;
+static struct syscore exynos_pm_syscore;
 
 void __init exynos_pm_init(void)
 {
@@ -685,10 +695,9 @@ void __init exynos_pm_init(void)
 	tmp |= pm_data->wake_disable_mask;
 	pmu_raw_writel(tmp, S5P_WAKEUP_MASK);
 
-	exynos_pm_syscore_ops.suspend	= pm_data->pm_suspend;
-	exynos_pm_syscore_ops.resume	= pm_data->pm_resume;
+	exynos_pm_syscore.ops = pm_data->syscore_ops;
 
-	register_syscore_ops(&exynos_pm_syscore_ops);
+	register_syscore(&exynos_pm_syscore);
 	suspend_set_ops(&exynos_suspend_ops);
 
 	/*
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index f8920d0010de..6521ab3d24fa 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -135,7 +135,7 @@ static struct timer_list perr_timer;
 
 static void dc21285_enable_error(struct timer_list *timer)
 {
-	del_timer(timer);
+	timer_delete(timer);
 
 	if (timer == &serr_timer)
 		enable_irq(IRQ_PCI_SERR);
diff --git a/arch/arm/mach-gemini/board-dt.c b/arch/arm/mach-gemini/board-dt.c
index fbafe7475c02..2bba617e4d54 100644
--- a/arch/arm/mach-gemini/board-dt.c
+++ b/arch/arm/mach-gemini/board-dt.c
@@ -34,7 +34,7 @@ static void gemini_idle(void)
 {
 	/*
 	 * Because of broken hardware we have to enable interrupts or the CPU
-	 * will never wakeup... Acctualy it is not very good to enable
+	 * will never wakeup... Actually it is not very good to enable
 	 * interrupts first since scheduler can miss a tick, but there is
 	 * no other way around this. Platforms that needs it for power saving
 	 * should enable it in init code, since by default it is
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 5d4f977ac7d2..47335c7dadf8 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -143,7 +143,7 @@ static void __init highbank_init(void)
 	sregs_base = of_iomap(np, 0);
 	WARN_ON(!sregs_base);
 
-	pm_power_off = highbank_power_off;
+	register_platform_power_off(highbank_power_off);
 	highbank_pm_init();
 
 	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
diff --git a/arch/arm/mach-hpe/Kconfig b/arch/arm/mach-hpe/Kconfig
deleted file mode 100644
index 3372bbf38d38..000000000000
--- a/arch/arm/mach-hpe/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-menuconfig ARCH_HPE
-	bool "HPE SoC support"
-	depends on ARCH_MULTI_V7
-	help
-	  This enables support for HPE ARM based BMC chips.
-if ARCH_HPE
-
-config ARCH_HPE_GXP
-	bool "HPE GXP SoC"
-	depends on ARCH_MULTI_V7
-	select ARM_VIC
-	select GENERIC_IRQ_CHIP
-	select CLKSRC_MMIO
-	help
-	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
-	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
-	  A9 core. It is capable of using an AXI bus to which a memory controller
-	  is attached. It has multiple SPI interfaces to connect boot flash and
-	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
-	  has multiple i2c engines to drive connectivity with a host
-	  infrastructure.
-
-endif
diff --git a/arch/arm/mach-hpe/Makefile b/arch/arm/mach-hpe/Makefile
deleted file mode 100644
index 8b0a91234df4..000000000000
--- a/arch/arm/mach-hpe/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o
diff --git a/arch/arm/mach-hpe/gxp.c b/arch/arm/mach-hpe/gxp.c
deleted file mode 100644
index 581c8da517b8..000000000000
--- a/arch/arm/mach-hpe/gxp.c
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
-
-#include <asm/mach/arch.h>
-
-static const char * const gxp_board_dt_compat[] = {
-	"hpe,gxp",
-	NULL,
-};
-
-DT_MACHINE_START(GXP_DT, "HPE GXP")
-	.dt_compat	= gxp_board_dt_compat,
-	.l2c_aux_val = 0,
-	.l2c_aux_mask = ~0,
-MACHINE_END
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e4fe059cd861..6ea1bd55acf8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -6,6 +6,7 @@ menuconfig ARCH_MXC
 	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
 	select GPIOLIB
+	select PINCTRL
 	select PM_OPP if PM
 	select SOC_BUS
 	select SRAM
@@ -241,7 +242,7 @@ choice
 
 	config VF_USE_PIT_TIMER
 		bool "Use PIT timer"
-		select VF_PIT_TIMER
+		select NXP_PIT_TIMER
 		help
 		  Use SoC Periodic Interrupt Timer (PIT) as clocksource
 
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index cf6546ddc7a3..3067c06b4b8e 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -201,8 +201,8 @@ static void __init mxc_init_irq(void __iomem *irqbase)
 	WARN_ON(irq_base < 0);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
-	domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0,
-				       &irq_domain_simple_ops, NULL);
+	domain = irq_domain_create_legacy(of_fwnode_handle(np), AVIC_NUM_IRQS, irq_base, 0,
+					  &irq_domain_simple_ops, NULL);
 	WARN_ON(!domain);
 
 	for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32)
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 13f3068e9845..45c1a2a7b35f 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -98,7 +98,7 @@ extern const u32 imx53_suspend_sz;
 void imx6_suspend(void __iomem *ocram_vbase);
 #else
 static inline void imx53_suspend(void __iomem *ocram_vbase) {}
-static const u32 imx53_suspend_sz;
+static __maybe_unused const u32 imx53_suspend_sz;
 static inline void imx6_suspend(void __iomem *ocram_vbase) {}
 #endif
 
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 5909088d5482..2e633569d2f8 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -245,9 +245,8 @@ static int __init imx_gpc_init(struct device_node *node,
 	if (WARN_ON(!gpc_base))
 	        return -ENOMEM;
 
-	domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
-					  node, &imx_gpc_domain_ops,
-					  NULL);
+	domain = irq_domain_create_hierarchy(parent_domain, 0, GPC_MAX_IRQS, of_fwnode_handle(node),
+					     &imx_gpc_domain_ops, NULL);
 	if (!domain) {
 		iounmap(gpc_base);
 		return -ENOMEM;
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index b68cb86dbe4c..94e4f4a2f73f 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -509,9 +509,8 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = device_get_match_data(&pdev->dev);
 
-	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
-			HRTIMER_MODE_REL);
-	pmu_mmdc->hrtimer.function = mmdc_pmu_timer_handler;
+	hrtimer_setup(&pmu_mmdc->hrtimer, mmdc_pmu_timer_handler, CLOCK_MONOTONIC,
+		      HRTIMER_MODE_REL);
 
 	cpumask_set_cpu(raw_smp_processor_id(), &pmu_mmdc->cpu);
 
@@ -596,7 +595,7 @@ static struct platform_driver imx_mmdc_driver = {
 		.of_match_table = imx_mmdc_dt_ids,
 	},
 	.probe		= imx_mmdc_probe,
-	.remove_new	= imx_mmdc_remove,
+	.remove		= imx_mmdc_remove,
 };
 
 static int __init imx_mmdc_init(void)
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index 8b3d98d288d9..50a5668e65d2 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -175,8 +175,8 @@ static int __init tzic_init_dt(struct device_node *np, struct device_node *p)
 	irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
 	WARN_ON(irq_base < 0);
 
-	domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
-				       &irq_domain_simple_ops, NULL);
+	domain = irq_domain_create_legacy(of_fwnode_handle(np), TZIC_NUM_IRQS, irq_base, 0,
+					  &irq_domain_simple_ops, NULL);
 	WARN_ON(!domain);
 
 	for (i = 0; i < 4; i++, irq_base += 32)
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 35a3430c7942..64ec487c13ab 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -15,6 +15,14 @@ config MACH_MT2701
 	bool "MediaTek MT2701 SoCs support"
 	default ARCH_MEDIATEK
 
+config MACH_MT6572
+	bool "MediaTek MT6572 SoCs support"
+	default ARCH_MEDIATEK
+
+config MACH_MT6582
+	bool "MediaTek MT6582 SoCs support"
+	default ARCH_MEDIATEK
+
 config MACH_MT6589
 	bool "MediaTek MT6589 SoCs support"
 	default ARCH_MEDIATEK
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index e6e9f93a1f01..fd3a8834fc4f 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -38,6 +38,8 @@ static void __init mediatek_timer_init(void)
 
 static const char * const mediatek_board_dt_compat[] = {
 	"mediatek,mt2701",
+	"mediatek,mt6572",
+	"mediatek,mt6582",
 	"mediatek,mt6589",
 	"mediatek,mt6592",
 	"mediatek,mt7623",
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
index 16a4ee6c9590..6b0943d95555 100644
--- a/arch/arm/mach-mediatek/platsmp.c
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -29,6 +29,12 @@ static const struct mtk_smp_boot_info mtk_mt8135_tz_boot = {
 	{ 0x3f8, 0x3f8, 0x3f8 },
 };
 
+static const struct mtk_smp_boot_info mtk_mt6572_boot = {
+	0x10001400, 0x08,
+	{ 0x534c4131 },
+	{ 0x0c },
+};
+
 static const struct mtk_smp_boot_info mtk_mt6589_boot = {
 	0x10002000, 0x34,
 	{ 0x534c4131, 0x4c415332, 0x41534c33 },
@@ -49,6 +55,8 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
 };
 
 static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
+	{ .compatible   = "mediatek,mt6572", .data = &mtk_mt6572_boot },
+	{ .compatible   = "mediatek,mt6582", .data = &mtk_mt7623_boot },
 	{ .compatible   = "mediatek,mt6589", .data = &mtk_mt6589_boot },
 	{ .compatible   = "mediatek,mt7623", .data = &mtk_mt7623_boot },
 	{ .compatible   = "mediatek,mt7629", .data = &mtk_mt7623_boot },
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index a643b71e30a3..08ec6bd84ada 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -8,6 +8,7 @@ menuconfig ARCH_OMAP1
 	select ARCH_OMAP
 	select CLKSRC_MMIO
 	select FORCE_PCI if PCCARD
+	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 35c2f9574dbd..5cf6fcca602c 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -97,7 +97,7 @@ ENTRY(qwerty_fiqin_start)
 
 	ldr r13, [r12, #IRQ_ITR_REG_OFFSET]	@ fetch interrupts status
 	bics r13, r13, r11			@ clear masked - any left?
-	beq exit				@ none - spurious FIQ? exit
+	beq .Lexit				@ none - spurious FIQ? exit
 
 	ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET]	@ get requested interrupt number
 
@@ -105,25 +105,25 @@ ENTRY(qwerty_fiqin_start)
 	str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
 
 	cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY)	@ is it GPIO interrupt?
-	beq gpio				@ yes - process it
+	beq .Lgpio				@ yes - process it
 
 	mov r8, #1
 	orr r8, r11, r8, lsl r10		@ mask spurious interrupt
 	str r8, [r12, #IRQ_MIR_REG_OFFSET]
-exit:
+.Lexit:
 	subs	pc, lr, #4			@ return from FIQ
 	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 
 
 	@@@@@@@@@@@@@@@@@@@@@@@@@@@
-gpio:	@ GPIO bank interrupt handler
+.Lgpio:	@ GPIO bank interrupt handler
 	ldr r12, omap1510_gpio_base		@ set base pointer to GPIO bank
 
 	ldr r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ fetch GPIO interrupts mask
-restart:
+.Lrestart:
 	ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS]	@ fetch status bits
 	bics r13, r13, r11			@ clear masked - any left?
-	beq exit				@ no - spurious interrupt? exit
+	beq .Lexit				@ no - spurious interrupt? exit
 
 	orr r11, r11, r13			@ mask all requested interrupts
 	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
@@ -131,7 +131,7 @@ restart:
 	str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts
 
 	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
-	beq hksw				@ no - try next source
+	beq .Lhksw				@ no - try next source
 
 
 	@@@@@@@@@@@@@@@@@@@@@@
@@ -145,10 +145,10 @@ restart:
 
 	ldr r10, [r9, #BUF_STATE]		@ fetch kbd interface state
 	cmp r10, #0				@ are we expecting start bit?
-	bne data				@ no - go to data processing
+	bne .Ldata				@ no - go to data processing
 
 	ands r8, r8, #KEYBRD_DATA_MASK		@ check start bit - detected?
-	beq hksw				@ no - try next source
+	beq .Lhksw				@ no - try next source
 
 	@ r8 contains KEYBRD_DATA_MASK, use it
 	str r8, [r9, #BUF_STATE]		@ enter data processing state
@@ -162,9 +162,9 @@ restart:
 	mvn r11, #KEYBRD_CLK_MASK		@ prepare all except kbd mask
 	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ store into the mask register
 
-	b restart				@ restart
+	b .Lrestart				@ restart
 
-data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
+.Ldata:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
 
 	@ r8 still contains GPIO input bits
 	ands r8, r8, #KEYBRD_DATA_MASK		@ is keyboard data line low?
@@ -175,7 +175,7 @@ data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
 	mov r10, r10, lsl #1			@ shift mask left
 	bics r10, r10, #0x800			@ have we got all the bits?
 	strne r10, [r9, #BUF_MASK]		@ not yet - store the mask
-	bne restart				@ and restart
+	bne .Lrestart				@ and restart
 
 	@ r10 already contains 0, reuse it
 	str r10, [r9, #BUF_STATE]		@ reset state to start
@@ -189,7 +189,7 @@ data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
 	ldr r10, [r9, #BUF_KEYS_CNT]		@ get saved keystrokes count
 	ldr r8, [r9, #BUF_BUF_LEN]		@ get buffer size
 	cmp r10, r8				@ is buffer full?
-	beq hksw				@ yes - key lost, next source
+	beq .Lhksw				@ yes - key lost, next source
 
 	add r10, r10, #1			@ incremet keystrokes counter
 	str r10, [r9, #BUF_KEYS_CNT]
@@ -213,9 +213,9 @@ data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
 	@@@@@@@@@@@@@@@@@@@@@@@@
 
 
-hksw:	@Is hook switch interrupt requested?
+.Lhksw:	@Is hook switch interrupt requested?
 	tst r13, #HOOK_SWITCH_MASK 		@ is hook switch status bit set?
-	beq mdm					@ no - try next source
+	beq .Lmdm				@ no - try next source
 
 
 	@@@@@@@@@@@@@@@@@@@@@@@@
@@ -230,9 +230,9 @@ hksw:	@Is hook switch interrupt requested?
 	@@@@@@@@@@@@@@@@@@@@@@@@
 
 
-mdm:	@Is it a modem interrupt?
+.Lmdm:	@Is it a modem interrupt?
 	tst r13, #MODEM_IRQ_MASK 		@ is modem status bit set?
-	beq irq					@ no - check for next interrupt
+	beq .Lirq				@ no - check for next interrupt
 
 
 	@@@@@@@@@@@@@@@@@@@@@@@@
@@ -245,13 +245,13 @@ mdm:	@Is it a modem interrupt?
 	@@@@@@@@@@@@@@@@@@@@@@@@
 
 
-irq:	@ Place deferred_fiq interrupt request
+.Lirq:	@ Place deferred_fiq interrupt request
 	ldr r12, deferred_fiq_ih_base		@ set pointer to IRQ handler
 	mov r10, #DEFERRED_FIQ_MASK		@ set deferred_fiq bit
 	str r10, [r12, #IRQ_ISR_REG_OFFSET] 	@ place it in the ISR register
 
 	ldr r12, omap1510_gpio_base		@ set pointer back to GPIO bank
-	b restart				@ check for next GPIO interrupt
+	b .Lrestart				@ check for next GPIO interrupt
 	@@@@@@@@@@@@@@@@@@@@@@@@@@@
 
 
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 0daf6c5b5c1c..16392720296c 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/nand-gpio.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -175,20 +176,18 @@ static struct resource latch1_resources[] = {
 
 #define LATCH1_LABEL	"latch1"
 
-static struct bgpio_pdata latch1_pdata = {
-	.label	= LATCH1_LABEL,
-	.base	= -1,
-	.ngpio	= LATCH1_NGPIO,
+static const struct property_entry latch1_gpio_props[] = {
+	PROPERTY_ENTRY_STRING("label", LATCH1_LABEL),
+	PROPERTY_ENTRY_U32("ngpios", LATCH1_NGPIO),
+	{ }
 };
 
-static struct platform_device latch1_gpio_device = {
+static const struct platform_device_info latch1_gpio_devinfo = {
 	.name		= "basic-mmio-gpio",
 	.id		= 0,
-	.resource	= latch1_resources,
-	.num_resources	= ARRAY_SIZE(latch1_resources),
-	.dev		= {
-		.platform_data	= &latch1_pdata,
-	},
+	.res		= latch1_resources,
+	.num_res	= ARRAY_SIZE(latch1_resources),
+	.properties	= latch1_gpio_props,
 };
 
 #define LATCH1_PIN_LED_CAMERA		0
@@ -213,20 +212,18 @@ static struct resource latch2_resources[] = {
 
 #define LATCH2_LABEL	"latch2"
 
-static struct bgpio_pdata latch2_pdata = {
-	.label	= LATCH2_LABEL,
-	.base	= -1,
-	.ngpio	= LATCH2_NGPIO,
+static const struct property_entry latch2_gpio_props[] = {
+	PROPERTY_ENTRY_STRING("label", LATCH2_LABEL),
+	PROPERTY_ENTRY_U32("ngpios", LATCH2_NGPIO),
+	{ }
 };
 
-static struct platform_device latch2_gpio_device = {
+static struct platform_device_info latch2_gpio_devinfo = {
 	.name		= "basic-mmio-gpio",
 	.id		= 1,
-	.resource	= latch2_resources,
-	.num_resources	= ARRAY_SIZE(latch2_resources),
-	.dev		= {
-		.platform_data	= &latch2_pdata,
-	},
+	.res		= latch2_resources,
+	.num_res	= ARRAY_SIZE(latch2_resources),
+	.properties	= latch2_gpio_props,
 };
 
 #define LATCH2_PIN_LCD_VBLEN		0
@@ -542,8 +539,6 @@ static struct gpiod_lookup_table keybrd_pwr_gpio_table = {
 };
 
 static struct platform_device *ams_delta_devices[] __initdata = {
-	&latch1_gpio_device,
-	&latch2_gpio_device,
 	&ams_delta_kp_device,
 	&ams_delta_audio_device,
 	&ams_delta_serio_device,
@@ -697,6 +692,9 @@ static void __init ams_delta_init(void)
 	omap1_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
+	platform_device_register_full(&latch1_gpio_devinfo);
+	platform_device_register_full(&latch2_gpio_devinfo);
+
 	/*
 	 * As soon as regulator consumers have been registered, assign their
 	 * dev_names to consumer supply entries of respective regulators.
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 3312ef93355d..a5bf5554800f 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -289,7 +289,7 @@ static struct gpiod_lookup_table nokia770_irq_gpio_table = {
 		GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq",
 			    GPIO_ACTIVE_HIGH),
 		/* GPIO used for retu IRQ */
-		GPIO_LOOKUP("gpio-48-63", 15, "retu_irq",
+		GPIO_LOOKUP("gpio-48-63", 14, "retu_irq",
 			    GPIO_ACTIVE_HIGH),
 		/* GPIO used for tahvo IRQ */
 		GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq",
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 83381e23fab9..afc6404f62d3 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -705,14 +705,21 @@ static unsigned long omap1_clk_recalc_rate(struct clk_hw *hw, unsigned long p_ra
 	return clk->rate;
 }
 
-static long omap1_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *p_rate)
+static int omap1_clk_determine_rate(struct clk_hw *hw,
+				    struct clk_rate_request *req)
 {
 	struct omap1_clk *clk = to_omap1_clk(hw);
 
-	if (clk->round_rate != NULL)
-		return clk->round_rate(clk, rate, p_rate);
+	if (clk->round_rate != NULL) {
+		req->rate = clk->round_rate(clk, req->rate,
+					    &req->best_parent_rate);
 
-	return omap1_clk_recalc_rate(hw, *p_rate);
+		return 0;
+	}
+
+	req->rate = omap1_clk_recalc_rate(hw, req->best_parent_rate);
+
+	return 0;
 }
 
 static int omap1_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate)
@@ -771,7 +778,7 @@ const struct clk_ops omap1_clk_gate_ops = {
 
 const struct clk_ops omap1_clk_rate_ops = {
 	.recalc_rate	= omap1_clk_recalc_rate,
-	.round_rate	= omap1_clk_round_rate,
+	.determine_rate = omap1_clk_determine_rate,
 	.set_rate	= omap1_clk_set_rate,
 	.init		= omap1_clk_init_op,
 };
@@ -784,7 +791,7 @@ const struct clk_ops omap1_clk_full_ops = {
 	.disable_unused	= omap1_clk_disable_unused,
 #endif
 	.recalc_rate	= omap1_clk_recalc_rate,
-	.round_rate	= omap1_clk_round_rate,
+	.determine_rate = omap1_clk_determine_rate,
 	.set_rate	= omap1_clk_set_rate,
 	.init		= omap1_clk_init_op,
 };
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 9b587ecebb1c..bb1bc060ecd8 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -220,8 +220,7 @@ void __init omap1_init_irq(void)
 	omap_l2_irq = irq_base;
 	omap_l2_irq -= NR_IRQS_LEGACY;
 
-	domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0,
-				       &irq_domain_simple_ops, NULL);
+	domain = irq_domain_create_legacy(NULL, nr_irqs, irq_base, 0, &irq_domain_simple_ops, NULL);
 
 	pr_info("Total of %lu interrupts in %i interrupt banks\n",
 		nr_irqs, irq_bank_count);
diff --git a/arch/arm/mach-omap1/omap-dma.c b/arch/arm/mach-omap1/omap-dma.c
index f091f78631d0..aebe5e55ff60 100644
--- a/arch/arm/mach-omap1/omap-dma.c
+++ b/arch/arm/mach-omap1/omap-dma.c
@@ -832,7 +832,7 @@ static void omap_system_dma_remove(struct platform_device *pdev)
 
 static struct platform_driver omap_system_dma_driver = {
 	.probe		= omap_system_dma_probe,
-	.remove_new	= omap_system_dma_remove,
+	.remove		= omap_system_dma_remove,
 	.driver		= {
 		.name	= "omap_dma_system"
 	},
diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c
index fcf3d557aa78..3cdf223addcc 100644
--- a/arch/arm/mach-omap2/am33xx-restart.c
+++ b/arch/arm/mach-omap2/am33xx-restart.c
@@ -2,12 +2,46 @@
 /*
  * am33xx-restart.c - Code common to all AM33xx machines.
  */
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/reboot.h>
 
 #include "common.h"
+#include "control.h"
 #include "prm.h"
 
+/*
+ * Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before
+ * ICEPick Samples
+ *
+ * If EMU0/EMU1 pins have been used as GPIO outputs and actively driving low
+ * level, the device might not reboot in normal mode. We are in a bad position
+ * to override GPIO state here, so just switch the pins into EMU input mode
+ * (that's what reset will do anyway) and wait a bit, because the state will be
+ * latched 190 ns after reset.
+ */
+static void am33xx_advisory_1_0_36(void)
+{
+	u32 emu0 = omap_ctrl_readl(AM335X_PIN_EMU0);
+	u32 emu1 = omap_ctrl_readl(AM335X_PIN_EMU1);
+
+	/* If both pins are in EMU mode, nothing to do */
+	if (!(emu0 & 7) && !(emu1 & 7))
+		return;
+
+	/* Switch GPIO3_7/GPIO3_8 into EMU0/EMU1 modes respectively */
+	omap_ctrl_writel(emu0 & ~7, AM335X_PIN_EMU0);
+	omap_ctrl_writel(emu1 & ~7, AM335X_PIN_EMU1);
+
+	/*
+	 * Give pull-ups time to load the pin/PCB trace capacity.
+	 * 5 ms shall be enough to load 1 uF (would be huge capacity for these
+	 * pins) with TI-recommended 4k7 external pull-ups.
+	 */
+	mdelay(5);
+}
+
 /**
  * am33xx_restart - trigger a software restart of the SoC
  * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
@@ -18,6 +52,8 @@
  */
 void am33xx_restart(enum reboot_mode mode, const char *cmd)
 {
+	am33xx_advisory_1_0_36();
+
 	/* TODO: Handle cmd if necessary */
 	prm_reboot_mode = mode;
 
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index ff2a4a4d8220..969265d5d5c6 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -167,7 +167,7 @@ static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
 
 #ifdef CONFIG_MMC_DEBUG
 	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
-		power_on ? "on" : "off", vdd);
+		str_on_off(power_on), vdd);
 #endif
 	if (slot == 0) {
 		if (!power_on)
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 011076a5952f..96c5cdc718c8 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -70,8 +70,8 @@ static unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
  * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
  * just uses the ARM rates.
  */
-static long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
-			       unsigned long *parent_rate)
+static int omap2_determine_rate_to_table(struct clk_hw *hw,
+					 struct clk_rate_request *req)
 {
 	const struct prcm_config *ptr;
 	long highest_rate;
@@ -87,10 +87,12 @@ static long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
 		highest_rate = ptr->mpu_speed;
 
 		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
+		if (ptr->mpu_speed <= req->rate)
 			break;
 	}
-	return highest_rate;
+	req->rate = highest_rate;
+
+	return 0;
 }
 
 /* Sets basic clocks based on the specified rate */
@@ -215,7 +217,7 @@ static void omap2xxx_clkt_vps_late_init(void)
 static const struct clk_ops virt_prcm_set_ops = {
 	.recalc_rate	= &omap2_table_mpu_recalc,
 	.set_rate	= &omap2_select_table_rate,
-	.round_rate	= &omap2_round_to_table_rate,
+	.determine_rate = &omap2_determine_rate_to_table,
 };
 
 /**
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index c36fb2721261..86a2f9e5d0ef 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -48,6 +48,7 @@
 #define CLKDM_NO_AUTODEPS			(1 << 4)
 #define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
 #define CLKDM_MISSING_IDLE_REPORTING		(1 << 6)
+#define CLKDM_STANDBY_FORCE_WAKEUP		BIT(7)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c
index 87f4e927eb18..c05a3c07d448 100644
--- a/arch/arm/mach-omap2/clockdomains33xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -19,7 +19,7 @@ static struct clockdomain l4ls_am33xx_clkdm = {
 	.pwrdm		= { .name = "per_pwrdm" },
 	.cm_inst	= AM33XX_CM_PER_MOD,
 	.clkdm_offs	= AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET,
-	.flags		= CLKDM_CAN_SWSUP,
+	.flags		= CLKDM_CAN_SWSUP | CLKDM_STANDBY_FORCE_WAKEUP,
 };
 
 static struct clockdomain l3s_am33xx_clkdm = {
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index acdf72a541c0..a4dd42abda89 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -20,6 +20,9 @@
 #include "cm-regbits-34xx.h"
 #include "cm-regbits-33xx.h"
 #include "prm33xx.h"
+#if IS_ENABLED(CONFIG_SUSPEND)
+#include <linux/suspend.h>
+#endif
 
 /*
  * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
@@ -328,8 +331,17 @@ static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
 {
 	bool hwsup = false;
 
+#if IS_ENABLED(CONFIG_SUSPEND)
+	/*
+	 * In case of standby, Don't put the l4ls clk domain to sleep.
+	 * Since CM3 PM FW doesn't wake-up/enable the l4ls clk domain
+	 * upon wake-up, CM3 PM FW fails to wake-up th MPU.
+	 */
+	if (pm_suspend_target_state == PM_SUSPEND_STANDBY &&
+	    (clkdm->flags & CLKDM_STANDBY_FORCE_WAKEUP))
+		return 0;
+#endif
 	hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-
 	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
 		am33xx_clkdm_sleep(clkdm);
 
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 2517c4a5a0e2..04b4ba0f59ab 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -68,7 +68,7 @@ extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
 				u32 arg1, u32 arg2, u32 arg3, u32 arg4);
 extern void omap_smccc_smc(u32 fn, u32 arg);
 extern void omap_smc1(u32 fn, u32 arg);
-extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
+extern u32 omap_smc2(u32 id, u32 flag, u32 pargs);
 extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
 extern int omap_secure_ram_reserve_memblock(void);
 extern u32 save_secure_ram_context(u32 args_pa);
diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S
index 7376f528034d..fe3b5478200a 100644
--- a/arch/arm/mach-omap2/omap-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -32,7 +32,7 @@ ENTRY(_omap_smc1)
 ENDPROC(_omap_smc1)
 
 /**
- * u32 omap_smc2(u32 id, u32 falg, u32 pargs)
+ * u32 omap_smc2(u32 id, u32 flag, u32 pargs)
  * Low level common routine for secure HAL and PPA APIs.
  * @id: Application ID of HAL APIs
  * @flag: Flag to indicate the criticality of operation
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 6f0d6120c174..a66b1dc61571 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -585,9 +585,8 @@ static int __init wakeupgen_init(struct device_node *node,
 		wakeupgen_ops = &am43xx_wakeupgen_ops;
 	}
 
-	domain = irq_domain_add_hierarchy(parent_domain, 0, max_irqs,
-					  node, &wakeupgen_domain_ops,
-					  NULL);
+	domain = irq_domain_create_hierarchy(parent_domain, 0, max_irqs, of_fwnode_handle(node),
+					     &wakeupgen_domain_ops, NULL);
 	if (!domain) {
 		iounmap(wakeupgen_base);
 		return -ENOMEM;
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index c907478be196..4abb86dc98fd 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -388,12 +388,15 @@ static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
 		if (!state_node)
 			break;
 
-		if (!of_device_is_available(state_node))
+		if (!of_device_is_available(state_node)) {
+			of_node_put(state_node);
 			continue;
+		}
 
 		if (i == CPUIDLE_STATE_MAX) {
 			pr_warn("%s: cpuidle states reached max possible\n",
 				__func__);
+			of_node_put(state_node);
 			break;
 		}
 
@@ -403,6 +406,7 @@ static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
 			states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 |
 							 WFI_FLAG_FLUSH_CACHE;
 
+		of_node_put(state_node);
 		state_count++;
 	}
 
diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c
index 4f31e61c0c90..9f9a20274db8 100644
--- a/arch/arm/mach-omap2/pmic-cpcap.c
+++ b/arch/arm/mach-omap2/pmic-cpcap.c
@@ -264,7 +264,11 @@ int __init omap4_cpcap_init(void)
 
 static int __init cpcap_late_init(void)
 {
-	omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
+	if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
+		return 0;
+
+	if (soc_is_omap443x() || soc_is_omap446x() || soc_is_omap447x())
+		omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2441d96b7144..0225b9889404 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -523,7 +523,7 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
  * Set the powerdomain @pwrdm's next power state to @pwrst.  The powerdomain
  * may not enter this state immediately if the preconditions for this state
  * have not been satisfied.  Returns -EINVAL if the powerdomain pointer is
- * null or if the power state is invalid for the powerdomin, or returns 0
+ * null or if the power state is invalid for the powerdomain, or returns 0
  * upon success.
  */
 int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
@@ -1111,7 +1111,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 	int curr_pwrst;
 	int ret = 0;
 
-	if (!pwrdm || IS_ERR(pwrdm))
+	if (IS_ERR_OR_NULL(pwrdm))
 		return -EINVAL;
 
 	while (!(pwrdm->pwrsts & (1 << pwrst))) {
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 49e8bc69abdd..000c2bca5ef0 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -51,7 +51,7 @@ static LIST_HEAD(voltdm_list);
  */
 unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
 {
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return 0;
 	}
@@ -73,7 +73,7 @@ static int voltdm_scale(struct voltagedomain *voltdm,
 	int ret, i;
 	unsigned long volt = 0;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return -EINVAL;
 	}
@@ -124,7 +124,7 @@ void voltdm_reset(struct voltagedomain *voltdm)
 {
 	unsigned long target_volt;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
@@ -154,7 +154,7 @@ void voltdm_reset(struct voltagedomain *voltdm)
 void omap_voltage_get_volttable(struct voltagedomain *voltdm,
 				struct omap_volt_data **volt_data)
 {
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
@@ -182,7 +182,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
 {
 	int i;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return ERR_PTR(-EINVAL);
 	}
@@ -216,7 +216,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
 int omap_voltage_register_pmic(struct voltagedomain *voltdm,
 			       struct omap_voltdm_pmic *pmic)
 {
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return -EINVAL;
 	}
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index a709655b978c..03c481c4742c 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -199,7 +199,7 @@ void omap_vp_enable(struct voltagedomain *voltdm)
 	struct omap_vp_instance *vp;
 	u32 vpconfig, volt;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
@@ -244,7 +244,7 @@ void omap_vp_disable(struct voltagedomain *voltdm)
 	u32 vpconfig;
 	int timeout;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index c9c2c46ecead..caad4fca8de3 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -34,9 +34,9 @@ extern void __init pxa27x_map_io(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa3xx_map_io(void);
 
-extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa2xx_mfp_syscore_ops;
-extern struct syscore_ops pxa3xx_mfp_syscore_ops;
+extern struct syscore pxa_irq_syscore;
+extern struct syscore pxa2xx_mfp_syscore;
+extern struct syscore pxa3xx_mfp_syscore;
 
 void __init pxa_set_ffuart_info(void *info);
 void __init pxa_set_btuart_info(void *info);
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index a9ef71008147..99acebbbf065 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -147,12 +147,11 @@ pxa_init_irq_common(struct device_node *node, int irq_nr,
 	int n;
 
 	pxa_internal_irq_nr = irq_nr;
-	pxa_irq_domain = irq_domain_add_legacy(node, irq_nr,
-					       PXA_IRQ(0), 0,
-					       &pxa_irq_ops, NULL);
+	pxa_irq_domain = irq_domain_create_legacy(of_fwnode_handle(node), irq_nr, PXA_IRQ(0), 0,
+						  &pxa_irq_ops, NULL);
 	if (!pxa_irq_domain)
 		panic("Unable to add PXA IRQ domain\n");
-	irq_set_default_host(pxa_irq_domain);
+	irq_set_default_domain(pxa_irq_domain);
 
 	for (n = 0; n < irq_nr; n += 32) {
 		void __iomem *base = irq_base(n >> 5);
@@ -179,7 +178,7 @@ void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
 static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
 static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
 
-static int pxa_irq_suspend(void)
+static int pxa_irq_suspend(void *data)
 {
 	int i;
 
@@ -198,7 +197,7 @@ static int pxa_irq_suspend(void)
 	return 0;
 }
 
-static void pxa_irq_resume(void)
+static void pxa_irq_resume(void *data)
 {
 	int i;
 
@@ -220,11 +219,15 @@ static void pxa_irq_resume(void)
 #define pxa_irq_resume		NULL
 #endif
 
-struct syscore_ops pxa_irq_syscore_ops = {
+static const struct syscore_ops pxa_irq_syscore_ops = {
 	.suspend	= pxa_irq_suspend,
 	.resume		= pxa_irq_resume,
 };
 
+struct syscore pxa_irq_syscore = {
+	.ops = &pxa_irq_syscore_ops,
+};
+
 #ifdef CONFIG_OF
 static const struct of_device_id intc_ids[] __initconst = {
 	{ .compatible = "marvell,pxa-intc", },
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index f5a3d890f682..d1347055fbe4 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -346,7 +346,7 @@ static unsigned long saved_gpdr[4];
 static unsigned long saved_gplr[4];
 static unsigned long saved_pgsr[4];
 
-static int pxa2xx_mfp_suspend(void)
+static int pxa2xx_mfp_suspend(void *data)
 {
 	int i;
 
@@ -385,7 +385,7 @@ static int pxa2xx_mfp_suspend(void)
 	return 0;
 }
 
-static void pxa2xx_mfp_resume(void)
+static void pxa2xx_mfp_resume(void *data)
 {
 	int i;
 
@@ -404,11 +404,15 @@ static void pxa2xx_mfp_resume(void)
 #define pxa2xx_mfp_resume	NULL
 #endif
 
-struct syscore_ops pxa2xx_mfp_syscore_ops = {
+static const struct syscore_ops pxa2xx_mfp_syscore_ops = {
 	.suspend	= pxa2xx_mfp_suspend,
 	.resume		= pxa2xx_mfp_resume,
 };
 
+struct syscore pxa2xx_mfp_syscore = {
+	.ops = &pxa2xx_mfp_syscore_ops,
+};
+
 static int __init pxa2xx_mfp_init(void)
 {
 	int i;
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index d16ab7451efe..fe7498fbb62b 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -27,13 +27,13 @@
  * a pull-down mode if they're an active low chip select, and we're
  * just entering standby.
  */
-static int pxa3xx_mfp_suspend(void)
+static int pxa3xx_mfp_suspend(void *data)
 {
 	mfp_config_lpm();
 	return 0;
 }
 
-static void pxa3xx_mfp_resume(void)
+static void pxa3xx_mfp_resume(void *data)
 {
 	mfp_config_run();
 
@@ -49,7 +49,11 @@ static void pxa3xx_mfp_resume(void)
 #define pxa3xx_mfp_resume	NULL
 #endif
 
-struct syscore_ops pxa3xx_mfp_syscore_ops = {
+static const struct syscore_ops pxa3xx_mfp_syscore_ops = {
 	.suspend	= pxa3xx_mfp_suspend,
 	.resume		= pxa3xx_mfp_resume,
 };
+
+struct syscore pxa3xx_mfp_syscore = {
+	.ops = &pxa3xx_mfp_syscore_ops,
+};
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 03e34841fc00..70509a599814 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -235,8 +235,8 @@ static int __init pxa25x_init(void)
 
 		pxa25x_init_pm();
 
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+		register_syscore(&pxa_irq_syscore);
+		register_syscore(&pxa2xx_mfp_syscore);
 
 		if (!of_have_populated_dt()) {
 			software_node_register(&pxa2xx_gpiochip_node);
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index f8382477d629..ff6361979038 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -337,8 +337,8 @@ static int __init pxa27x_init(void)
 
 		pxa27x_init_pm();
 
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+		register_syscore(&pxa_irq_syscore);
+		register_syscore(&pxa2xx_mfp_syscore);
 
 		if (!of_have_populated_dt()) {
 			software_node_register(&pxa2xx_gpiochip_node);
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 1d1e5713464d..06c578ea658e 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -424,8 +424,8 @@ static int __init pxa3xx_init(void)
 		if (cpu_is_pxa320())
 			enable_irq_wake(IRQ_WAKEUP1);
 
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
+		register_syscore(&pxa_irq_syscore);
+		register_syscore(&pxa3xx_mfp_syscore);
 	}
 
 	return ret;
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 72fa2e3fd353..71b282b146d0 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -31,10 +31,10 @@
 /*
  * Constants
  */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (secs_to_jiffies(60))
+#define SHARPSL_CHARGE_FINISH_TIME             (secs_to_jiffies(10*60))
+#define SHARPSL_BATCHK_TIME                    (secs_to_jiffies(15))
+#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10) /* 10 min */
 
 #define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
 #define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
@@ -913,13 +913,13 @@ static void sharpsl_pm_remove(struct platform_device *pdev)
 	if (sharpsl_pm.machinfo->exit)
 		sharpsl_pm.machinfo->exit();
 
-	del_timer_sync(&sharpsl_pm.chrg_full_timer);
-	del_timer_sync(&sharpsl_pm.ac_timer);
+	timer_delete_sync(&sharpsl_pm.chrg_full_timer);
+	timer_delete_sync(&sharpsl_pm.ac_timer);
 }
 
 static struct platform_driver sharpsl_pm_driver = {
 	.probe		= sharpsl_pm_probe,
-	.remove_new	= sharpsl_pm_remove,
+	.remove		= sharpsl_pm_remove,
 	.suspend	= sharpsl_pm_suspend,
 	.resume		= sharpsl_pm_resume,
 	.driver		= {
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index 2d2a321d82f8..fb93a8f28356 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -18,7 +18,7 @@ static unsigned long msc[2];
 static unsigned long sxcnfg, memclkcfg;
 static unsigned long csadrcfg[4];
 
-static int pxa3xx_smemc_suspend(void)
+static int pxa3xx_smemc_suspend(void *data)
 {
 	msc[0] = __raw_readl(MSC0);
 	msc[1] = __raw_readl(MSC1);
@@ -32,7 +32,7 @@ static int pxa3xx_smemc_suspend(void)
 	return 0;
 }
 
-static void pxa3xx_smemc_resume(void)
+static void pxa3xx_smemc_resume(void *data)
 {
 	__raw_writel(msc[0], MSC0);
 	__raw_writel(msc[1], MSC1);
@@ -46,11 +46,15 @@ static void pxa3xx_smemc_resume(void)
 	__raw_writel(0x2, CSMSADRCFG);
 }
 
-static struct syscore_ops smemc_syscore_ops = {
+static const struct syscore_ops smemc_syscore_ops = {
 	.suspend	= pxa3xx_smemc_suspend,
 	.resume		= pxa3xx_smemc_resume,
 };
 
+static struct syscore smemc_syscore = {
+	.ops = &smemc_syscore_ops,
+};
+
 static int __init smemc_init(void)
 {
 	if (cpu_is_pxa3xx()) {
@@ -64,7 +68,7 @@ static int __init smemc_init(void)
 		 */
 		__raw_writel(0x2, CSMSADRCFG);
 
-		register_syscore_ops(&smemc_syscore_ops);
+		register_syscore(&smemc_syscore);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 33533e35720f..c0b1f7e6be87 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -1096,7 +1096,7 @@ static void __init spitz_init(void)
 		software_node_register(&spitz_scoop_2_gpiochip_node);
 
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
-	pm_power_off = spitz_poweroff;
+	register_platform_power_off(spitz_poweroff);
 
 	PMCR = 0x00;
 
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index b7855cc665e9..c90193dd3928 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -13,7 +13,7 @@ config ARCH_ROCKCHIP
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select DW_APB_TIMER_OF
-	select REGULATOR if PM
+	select REGULATOR
 	select ROCKCHIP_TIMER
 	select ARM_GLOBAL_TIMER
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 36915a073c23..f432d22bfed8 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -279,11 +279,6 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 	}
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
-		if (rockchip_smp_prepare_sram(node)) {
-			of_node_put(node);
-			return;
-		}
-
 		/* enable the SCU power domain */
 		pmu_set_power_domain(PMU_PWRDN_SCU, true);
 
@@ -316,11 +311,19 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
 		ncores = ((l2ctlr >> 24) & 0x3) + 1;
 	}
-	of_node_put(node);
 
 	/* Make sure that all cores except the first are really off */
 	for (i = 1; i < ncores; i++)
 		pmu_set_power_domain(0 + i, false);
+
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+		if (rockchip_smp_prepare_sram(node)) {
+			of_node_put(node);
+			return;
+		}
+	}
+
+	of_node_put(node);
 }
 
 static void __init rk3036_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index 9f7454b8efa7..2cde4c83b7f9 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -1124,7 +1124,7 @@ static int ecard_match(struct device *_dev, const struct device_driver *_drv)
 	return ret;
 }
 
-struct bus_type ecard_bus_type = {
+const struct bus_type ecard_bus_type = {
 	.name		= "ecard",
 	.dev_groups	= ecard_dev_groups,
 	.match		= ecard_match,
diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
index 8c26d592d2a3..bab2abd8a34a 100644
--- a/arch/arm/mach-s3c/devs.c
+++ b/arch/arm/mach-s3c/devs.c
@@ -19,7 +19,6 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/dma-mapping.h>
-#include <linux/fb.h>
 #include <linux/gfp.h>
 #include <linux/mmc/host.h>
 #include <linux/ioport.h>
diff --git a/arch/arm/mach-s3c/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c
index 87daaa09e2c3..81e198e5a6d3 100644
--- a/arch/arm/mach-s3c/gpio-samsung.c
+++ b/arch/arm/mach-s3c/gpio-samsung.c
@@ -11,9 +11,9 @@
 // Samsung - GPIOlib support
 
 #include <linux/kernel.h>
+#include <linux/gpio/driver.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
@@ -430,8 +430,8 @@ static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
 	return 0;
 }
 
-static void samsung_gpiolib_set(struct gpio_chip *chip,
-				unsigned offset, int value)
+static int samsung_gpiolib_set(struct gpio_chip *chip, unsigned int offset,
+			       int value)
 {
 	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
 	void __iomem *base = ourchip->base;
@@ -447,6 +447,8 @@ static void samsung_gpiolib_set(struct gpio_chip *chip,
 	__raw_writel(dat, base + 0x04);
 
 	samsung_gpio_unlock(ourchip, flags);
+
+	return 0;
 }
 
 static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
diff --git a/arch/arm/mach-s3c/irq-pm-s3c64xx.c b/arch/arm/mach-s3c/irq-pm-s3c64xx.c
index 4a1e935bada1..ab726c595001 100644
--- a/arch/arm/mach-s3c/irq-pm-s3c64xx.c
+++ b/arch/arm/mach-s3c/irq-pm-s3c64xx.c
@@ -58,7 +58,7 @@ static struct irq_grp_save {
 
 static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS];
 
-static int s3c64xx_irq_pm_suspend(void)
+static int s3c64xx_irq_pm_suspend(void *data)
 {
 	struct irq_grp_save *grp = eint_grp_save;
 	int i;
@@ -79,7 +79,7 @@ static int s3c64xx_irq_pm_suspend(void)
 	return 0;
 }
 
-static void s3c64xx_irq_pm_resume(void)
+static void s3c64xx_irq_pm_resume(void *data)
 {
 	struct irq_grp_save *grp = eint_grp_save;
 	int i;
@@ -100,18 +100,22 @@ static void s3c64xx_irq_pm_resume(void)
 	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
 }
 
-static struct syscore_ops s3c64xx_irq_syscore_ops = {
+static const struct syscore_ops s3c64xx_irq_syscore_ops = {
 	.suspend = s3c64xx_irq_pm_suspend,
 	.resume	 = s3c64xx_irq_pm_resume,
 };
 
+static struct syscore s3c64xx_irq_syscore = {
+	.ops = &s3c64xx_irq_syscore_ops,
+};
+
 static __init int s3c64xx_syscore_init(void)
 {
 	/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
 	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return 0;
 
-	register_syscore_ops(&s3c64xx_irq_syscore_ops);
+	register_syscore(&s3c64xx_irq_syscore);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index e5df2cb51ab2..028169c7debf 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -252,14 +252,17 @@ static struct resource crag6410_mmgpio_resource[] = {
 	[0] = DEFINE_RES_MEM_NAMED(S3C64XX_PA_XM0CSN4, 1, "dat"),
 };
 
-static struct platform_device crag6410_mmgpio = {
+static const struct property_entry crag6410_mmgpio_props[] = {
+	PROPERTY_ENTRY_U32("gpio-mmio,base", MMGPIO_GPIO_BASE),
+	{ }
+};
+
+static struct platform_device_info crag6410_mmgpio_devinfo = {
 	.name		= "basic-mmio-gpio",
 	.id		= -1,
-	.resource	= crag6410_mmgpio_resource,
-	.num_resources	= ARRAY_SIZE(crag6410_mmgpio_resource),
-	.dev.platform_data = &(struct bgpio_pdata) {
-		.base	= MMGPIO_GPIO_BASE,
-	},
+	.res		= crag6410_mmgpio_resource,
+	.num_res	= ARRAY_SIZE(crag6410_mmgpio_resource),
+	.properties	= crag6410_mmgpio_props,
 };
 
 static struct platform_device speyside_device = {
@@ -373,7 +376,6 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&crag6410_gpio_keydev,
 	&crag6410_dm9k_device,
 	&s3c64xx_device_spi0,
-	&crag6410_mmgpio,
 	&crag6410_lcd_powerdev,
 	&crag6410_backlight_device,
 	&speyside_device,
@@ -871,6 +873,7 @@ static void __init crag6410_machine_init(void)
 
 	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
 	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
+	platform_device_register_full(&crag6410_mmgpio_devinfo);
 
 	gpio_led_register_device(-1, &gpio_leds_pdata);
 
diff --git a/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
index cfa34b55ca21..c3269cd6a848 100644
--- a/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
+++ b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
@@ -9,7 +9,6 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/fb.h>
 #include <linux/gpio.h>
 
 #include "fb.h"
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 6fa70f787df4..fa270750364c 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -195,20 +195,24 @@ static const struct platform_suspend_ops s5pv210_suspend_ops = {
 /*
  * Syscore operations used to delay restore of certain registers.
  */
-static void s5pv210_pm_resume(void)
+static void s5pv210_pm_resume(void *data)
 {
 	s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
 }
 
-static struct syscore_ops s5pv210_pm_syscore_ops = {
+static const struct syscore_ops s5pv210_pm_syscore_ops = {
 	.resume		= s5pv210_pm_resume,
 };
 
+static struct syscore s5pv210_pm_syscore = {
+	.ops = &s5pv210_pm_syscore_ops,
+};
+
 /*
  * Initialization entry point.
  */
 void __init s5pv210_pm_init(void)
 {
-	register_syscore_ops(&s5pv210_pm_syscore_ops);
+	register_syscore(&s5pv210_pm_syscore);
 	suspend_set_ops(&s5pv210_suspend_ops);
 }
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 0c586047d130..5383a26f5116 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -298,7 +298,7 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 static int __init sa1100_init(void)
 {
 	struct resource wdt_res = DEFINE_RES_MEM(0x90000000, 0x20);
-	pm_power_off = sa1100_power_off;
+	register_platform_power_off(sa1100_power_off);
 
 	regulator_has_full_constraints();
 
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 1956b095e699..d94810217095 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -188,7 +188,7 @@ static void jornada_ssp_remove(struct platform_device *dev)
 
 struct platform_driver jornadassp_driver = {
 	.probe	= jornada_ssp_probe,
-	.remove_new = jornada_ssp_remove,
+	.remove = jornada_ssp_remove,
 	.driver	= {
 		.name	= "jornada_ssp",
 	},
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 0ef0ebbf31ac..88fe79f0a4ed 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -423,7 +423,7 @@ static const struct dev_pm_ops neponset_pm_ops = {
 
 static struct platform_driver neponset_device_driver = {
 	.probe		= neponset_probe,
-	.remove_new	= neponset_remove,
+	.remove		= neponset_remove,
 	.driver		= {
 		.name	= "neponset",
 		.pm	= PM_OPS,
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index a956b489b6ea..2bc7e73a8582 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -136,6 +136,7 @@ ENDPROC(shmobile_smp_sleep)
 	.long	shmobile_smp_arg - 1b
 
 	.bss
+	.align	2
 	.globl	shmobile_smp_mpidr
 shmobile_smp_mpidr:
 	.space	NR_CPUS * 4
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 907a4f8c5aed..46654d196f8d 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -81,7 +81,7 @@ void __init rcar_gen2_pm_init(void)
 
 map:
 	/* RAM for jump stub, because BAR requires 256KB aligned address */
-	if (res.start & (256 * 1024 - 1) ||
+	if (res.start & (SZ_256K - 1) ||
 	    resource_size(&res) < shmobile_boot_size) {
 		pr_err("Invalid smp-sram region\n");
 		return;
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index c38367a10c79..3cd34a42e39b 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -8,19 +8,15 @@
  */
 
 #include <linux/clocksource.h>
-#include <linux/device.h>
-#include <linux/dma-map-ops.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/of_clk.h>
-#include <linux/of_fdt.h>
 #include <linux/psci.h>
 #include <asm/mach/arch.h>
 #include <asm/secure_cntvoff.h>
 #include "common.h"
-#include "rcar-gen2.h"
 
 static const struct of_device_id cpg_matches[] __initconst = {
 	{ .compatible = "renesas,r8a7742-cpg-mssr", .data = "extal" },
@@ -122,76 +118,6 @@ skip_update:
 	timer_probe();
 }
 
-struct memory_reserve_config {
-	u64 reserved;
-	u64 base, size;
-};
-
-static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname,
-				     int depth, void *data)
-{
-	const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	const __be32 *reg, *endp;
-	int l;
-	struct memory_reserve_config *mrc = data;
-	u64 lpae_start = 1ULL << 32;
-
-	/* We are scanning "memory" nodes only */
-	if (type == NULL || strcmp(type, "memory"))
-		return 0;
-
-	reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
-	if (reg == NULL)
-		reg = of_get_flat_dt_prop(node, "reg", &l);
-	if (reg == NULL)
-		return 0;
-
-	endp = reg + (l / sizeof(__be32));
-	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
-		u64 base, size;
-
-		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
-		size = dt_mem_next_cell(dt_root_size_cells, &reg);
-
-		if (base >= lpae_start)
-			continue;
-
-		if ((base + size) >= lpae_start)
-			size = lpae_start - base;
-
-		if (size < mrc->reserved)
-			continue;
-
-		if (base < mrc->base)
-			continue;
-
-		/* keep the area at top near the 32-bit legacy limit */
-		mrc->base = base + size - mrc->reserved;
-		mrc->size = mrc->reserved;
-	}
-
-	return 0;
-}
-
-static void __init rcar_gen2_reserve(void)
-{
-	struct memory_reserve_config mrc;
-
-	/* reserve 256 MiB at the top of the physical legacy 32-bit space */
-	memset(&mrc, 0, sizeof(mrc));
-	mrc.reserved = SZ_256M;
-
-	of_scan_flat_dt(rcar_gen2_scan_mem, &mrc);
-#ifdef CONFIG_DMA_CMA
-	if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) {
-		static struct cma *rcar_gen2_dma_contiguous;
-
-		dma_contiguous_reserve_area(mrc.size, mrc.base, 0,
-					    &rcar_gen2_dma_contiguous, true);
-	}
-#endif
-}
-
 static const char * const rcar_gen2_boards_compat_dt[] __initconst = {
 	"renesas,r8a7790",
 	"renesas,r8a7791",
@@ -204,7 +130,6 @@ static const char * const rcar_gen2_boards_compat_dt[] __initconst = {
 DT_MACHINE_START(RCAR_GEN2_DT, "Generic R-Car Gen2 (Flattened Device Tree)")
 	.init_late	= shmobile_init_late,
 	.init_time	= rcar_gen2_timer_init,
-	.reserve	= rcar_gen2_reserve,
 	.dt_compat	= rcar_gen2_boards_compat_dt,
 MACHINE_END
 
@@ -220,6 +145,5 @@ static const char * const rz_g1_boards_compat_dt[] __initconst = {
 DT_MACHINE_START(RZ_G1_DT, "Generic RZ/G1 (Flattened Device Tree)")
 	.init_late	= shmobile_init_late,
 	.init_time	= rcar_gen2_timer_init,
-	.reserve	= rcar_gen2_reserve,
 	.dt_compat	= rz_g1_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index b3842c971d31..e58699e13e1a 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -19,31 +19,13 @@ menuconfig ARCH_STI
 	select PL310_ERRATA_769419 if CACHE_L2X0
 	select RESET_CONTROLLER
 	help
-	  Include support for STMicroelectronics' STiH415/416, STiH407/10 and
+	  Include support for STMicroelectronics' STiH407/10 and
 	  STiH418 family SoCs using the Device Tree for discovery.  More
 	  information can be found in Documentation/arch/arm/sti/ and
 	  Documentation/devicetree.
 
 if ARCH_STI
 
-config SOC_STIH415
-	bool "STiH415 STMicroelectronics Consumer Electronics family"
-	default y
-	help
-	  This enables support for STMicroelectronics Digital Consumer
-	  Electronics family StiH415 parts, primarily targeted at set-top-box
-	  and other digital audio/video applications using Flattned Device
-	  Trees.
-
-config SOC_STIH416
-	bool "STiH416 STMicroelectronics Consumer Electronics family"
-	default y
-	help
-	  This enables support for STMicroelectronics Digital Consumer
-	  Electronics family StiH416 parts, primarily targeted at set-top-box
-	  and other digital audio/video applications using Flattened Device
-	  Trees.
-
 config SOC_STIH407
 	bool "STiH407 STMicroelectronics Consumer Electronics family"
 	default y
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 488084b61b4a..1aaf61184685 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -10,8 +10,6 @@
 #include "smp.h"
 
 static const char *const stih41x_dt_match[] __initconst = {
-	"st,stih415",
-	"st,stih416",
 	"st,stih407",
 	"st,stih410",
 	"st,stih418",
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index 5dcc4ddd1a56..e6233c8725ae 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -17,6 +17,7 @@ static const char *const stm32_compat[] __initconst = {
 	"st,stm32f746",
 	"st,stm32f769",
 	"st,stm32h743",
+	"st,stm32h747",
 	"st,stm32h750",
 	"st,stm32mp131",
 	"st,stm32mp133",
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index d5c805adf7a8..ea706fac6358 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -63,7 +63,7 @@ static void __init tegra_cpu_reset_handler_enable(void)
 	BUG_ON(is_enabled);
 	BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
 
-	memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
+	memcpy_toio(iram_base, (void *)__tegra_cpu_reset_handler_start,
 			tegra_cpu_reset_handler_size);
 
 	err = call_firmware_op(set_cpu_boot_addr, 0, reset_address);
diff --git a/arch/arm/mach-versatile/integrator_ap.c b/arch/arm/mach-versatile/integrator_ap.c
index 4bd6712e9f52..ee90d6619d0d 100644
--- a/arch/arm/mach-versatile/integrator_ap.c
+++ b/arch/arm/mach-versatile/integrator_ap.c
@@ -63,13 +63,13 @@ static void __init ap_map_io(void)
 #ifdef CONFIG_PM
 static unsigned long ic_irq_enable;
 
-static int irq_suspend(void)
+static int irq_suspend(void *data)
 {
 	ic_irq_enable = readl(VA_IC_BASE + IRQ_ENABLE);
 	return 0;
 }
 
-static void irq_resume(void)
+static void irq_resume(void *data)
 {
 	/* disable all irq sources */
 	cm_clear_irqs();
@@ -83,14 +83,18 @@ static void irq_resume(void)
 #define irq_resume NULL
 #endif
 
-static struct syscore_ops irq_syscore_ops = {
+static const struct syscore_ops irq_syscore_ops = {
 	.suspend	= irq_suspend,
 	.resume		= irq_resume,
 };
 
+static struct syscore irq_syscore = {
+	.ops = &irq_syscore_ops,
+};
+
 static int __init irq_syscore_init(void)
 {
-	register_syscore_ops(&irq_syscore_ops);
+	register_syscore(&irq_syscore);
 
 	return 0;
 }
diff --git a/arch/arm/mach-versatile/spc.c b/arch/arm/mach-versatile/spc.c
index 790092734cf6..812db32448fc 100644
--- a/arch/arm/mach-versatile/spc.c
+++ b/arch/arm/mach-versatile/spc.c
@@ -497,12 +497,13 @@ static unsigned long spc_recalc_rate(struct clk_hw *hw,
 	return freq * 1000;
 }
 
-static long spc_round_rate(struct clk_hw *hw, unsigned long drate,
-		unsigned long *parent_rate)
+static int spc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
 {
 	struct clk_spc *spc = to_clk_spc(hw);
 
-	return ve_spc_round_performance(spc->cluster, drate);
+	req->rate = ve_spc_round_performance(spc->cluster, req->rate);
+
+	return 0;
 }
 
 static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -515,7 +516,7 @@ static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
 
 static struct clk_ops clk_spc_ops = {
 	.recalc_rate = spc_recalc_rate,
-	.round_rate = spc_round_rate,
+	.determine_rate = spc_determine_rate,
 	.set_rate = spc_set_rate,
 };
 
diff --git a/arch/arm/mach-versatile/versatile.c b/arch/arm/mach-versatile/versatile.c
index 7ef03d0c224d..f0c80d4663ca 100644
--- a/arch/arm/mach-versatile/versatile.c
+++ b/arch/arm/mach-versatile/versatile.c
@@ -134,7 +134,7 @@ static void __init versatile_dt_pci_init(void)
 	val = readl(versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
 	if (val & 1) {
 		/*
-		 * Enable PCI accesses. Note that the documentaton is
+		 * Enable PCI accesses. Note that the documentation is
 		 * inconsistent whether or not this is needed, but the old
 		 * driver had it so we will keep it.
 		 */
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 0ab40087ae1c..1d294255d708 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -141,7 +141,7 @@ static void __init vt8500_init(void)
 			pr_err("%s:ioremap(power_off) failed\n", __func__);
 	}
 	if (pmc_base)
-		pm_power_off = &vt8500_power_off;
+		register_platform_power_off(vt8500_power_off);
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
 }
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 2b6f50dd5478..7b27ee9482b3 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -926,7 +926,6 @@ config VDSO
 	default y if ARM_ARCH_TIMER
 	select HAVE_GENERIC_VDSO
 	select GENERIC_TIME_VSYSCALL
-	select GENERIC_VDSO_32
 	select GENERIC_GETTIMEOFDAY
 	help
 	  Place in the process address space an ELF shared object
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index a195cd1d3e6d..1e2201013371 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -89,7 +89,7 @@ obj-$(CONFIG_CPU_V6)		+= proc-v6.o
 obj-$(CONFIG_CPU_V6K)		+= proc-v6.o
 obj-$(CONFIG_CPU_V7)		+= proc-v7.o proc-v7-bugs.o
 obj-$(CONFIG_CPU_V7M)		+= proc-v7m.o
-obj-$(CONFIG_CFI_CLANG)		+= proc.o
+obj-$(CONFIG_CFI)		+= proc.o
 
 obj-$(CONFIG_OUTER_CACHE)	+= l2c-common.o
 obj-$(CONFIG_CACHE_B15_RAC)	+= cache-b15-rac.o
diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c
index 6f63b90f9e1a..e7807356dfab 100644
--- a/arch/arm/mm/cache-b15-rac.c
+++ b/arch/arm/mm/cache-b15-rac.c
@@ -256,7 +256,7 @@ static int b15_rac_dead_cpu(unsigned int cpu)
 	return 0;
 }
 
-static int b15_rac_suspend(void)
+static int b15_rac_suspend(void *data)
 {
 	/* Suspend the read-ahead cache oeprations, forcing our cache
 	 * implementation to fallback to the regular ARMv7 calls.
@@ -271,7 +271,7 @@ static int b15_rac_suspend(void)
 	return 0;
 }
 
-static void b15_rac_resume(void)
+static void b15_rac_resume(void *data)
 {
 	/* Coming out of a S3 suspend/resume cycle, the read-ahead cache
 	 * register RAC_CONFIG0_REG will be restored to its default value, make
@@ -282,11 +282,15 @@ static void b15_rac_resume(void)
 	clear_bit(RAC_SUSPENDED, &b15_rac_flags);
 }
 
-static struct syscore_ops b15_rac_syscore_ops = {
+static const struct syscore_ops b15_rac_syscore_ops = {
 	.suspend	= b15_rac_suspend,
 	.resume		= b15_rac_resume,
 };
 
+static struct syscore b15_rac_syscore = {
+	.ops = &b15_rac_syscore_ops,
+};
+
 static int __init b15_rac_init(void)
 {
 	struct device_node *dn, *cpu_dn;
@@ -347,7 +351,7 @@ static int __init b15_rac_init(void)
 	}
 
 	if (IS_ENABLED(CONFIG_PM_SLEEP))
-		register_syscore_ops(&b15_rac_syscore_ops);
+		register_syscore(&b15_rac_syscore);
 
 	spin_lock(&rac_lock);
 	reg = __raw_readl(b15_rac_base + RAC_CONFIG0_REG);
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index 4a3668b52a2d..e1641799569b 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -112,7 +112,7 @@ SYM_FUNC_END(fa_flush_user_cache_range)
  *	- end	 - virtual end address
  */
 SYM_TYPED_FUNC_START(fa_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	fa_coherent_user_range
 #endif
 SYM_FUNC_END(fa_coherent_kern_range)
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 25dbd84a1aaf..2bfefb252ffd 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -295,7 +295,7 @@ static inline u32 read_extra_features(void)
 	return u;
 }
 
-static inline void write_extra_features(u32 u)
+static inline void __init write_extra_features(u32 u)
 {
 	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
 }
diff --git a/arch/arm/mm/cache-l2x0-pmu.c b/arch/arm/mm/cache-l2x0-pmu.c
index 993fefdc167a..93ef0502b7ff 100644
--- a/arch/arm/mm/cache-l2x0-pmu.c
+++ b/arch/arm/mm/cache-l2x0-pmu.c
@@ -539,8 +539,7 @@ static __init int l2x0_pmu_init(void)
 	 * at higher frequencies.
 	 */
 	l2x0_pmu_poll_period = ms_to_ktime(1000);
-	hrtimer_init(&l2x0_pmu_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	l2x0_pmu_hrtimer.function = l2x0_pmu_poll;
+	hrtimer_setup(&l2x0_pmu_hrtimer, l2x0_pmu_poll, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 
 	cpumask_set_cpu(0, &pmu_cpu);
 	ret = cpuhp_setup_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE,
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 43d91bfd2360..470867160076 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/string_choices.h>
 
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
@@ -667,9 +668,9 @@ static void __init l2c310_enable(void __iomem *base, unsigned num_lock)
 		u32 power_ctrl;
 
 		power_ctrl = readl_relaxed(base + L310_POWER_CTRL);
-		pr_info("L2C-310 dynamic clock gating %sabled, standby mode %sabled\n",
-			power_ctrl & L310_DYNAMIC_CLK_GATING_EN ? "en" : "dis",
-			power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis");
+		pr_info("L2C-310 dynamic clock gating %s, standby mode %s\n",
+			str_enabled_disabled(power_ctrl & L310_DYNAMIC_CLK_GATING_EN),
+			str_enabled_disabled(power_ctrl & L310_STNDBY_MODE_EN));
 	}
 
 	if (aux & L310_AUX_CTRL_FULL_LINE_ZERO)
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index b1e1aba602f7..bfe166ccace0 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -177,7 +177,7 @@ static inline void __init write_actlr(u32 actlr)
 	__asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
 }
 
-static void enable_extra_feature(unsigned int features)
+static void __init enable_extra_feature(unsigned int features)
 {
 	u32 u;
 
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 0e94e5193dbd..001d7042bd46 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -104,7 +104,7 @@ SYM_FUNC_END(v4_coherent_user_range)
  *	- size	- region size
  */
 SYM_TYPED_FUNC_START(v4_flush_kern_dcache_area)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v4_dma_flush_range
 #endif
 SYM_FUNC_END(v4_flush_kern_dcache_area)
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index ce55a2eef5da..874fe5310f9a 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -136,7 +136,7 @@ SYM_FUNC_END(v4wb_flush_user_cache_range)
  */
 SYM_TYPED_FUNC_START(v4wb_flush_kern_dcache_area)
 	add	r1, r0, r1
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v4wb_coherent_user_range
 #endif
 SYM_FUNC_END(v4wb_flush_kern_dcache_area)
@@ -152,7 +152,7 @@ SYM_FUNC_END(v4wb_flush_kern_dcache_area)
  *	- end	 - virtual end address
  */
 SYM_TYPED_FUNC_START(v4wb_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v4wb_coherent_user_range
 #endif
 SYM_FUNC_END(v4wb_coherent_kern_range)
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index a97dc267b3b0..2ee62e4b2b07 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -108,7 +108,7 @@ SYM_FUNC_END(v4wt_flush_user_cache_range)
  *	- end	 - virtual end address
  */
 SYM_TYPED_FUNC_START(v4wt_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v4wt_coherent_user_range
 #endif
 SYM_FUNC_END(v4wt_coherent_kern_range)
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 9f415476e218..5ceea8965ea1 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -117,7 +117,7 @@ SYM_FUNC_END(v6_flush_user_cache_range)
  *	- the Icache does not read data from the write buffer
  */
 SYM_TYPED_FUNC_START(v6_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v6_coherent_user_range
 #endif
 SYM_FUNC_END(v6_coherent_kern_range)
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 201ca05436fa..726681fb7d4d 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -261,7 +261,7 @@ SYM_FUNC_END(v7_flush_user_cache_range)
  *	- the Icache does not read data from the write buffer
  */
 SYM_TYPED_FUNC_START(v7_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v7_coherent_user_range
 #endif
 SYM_FUNC_END(v7_coherent_kern_range)
diff --git a/arch/arm/mm/cache-v7m.S b/arch/arm/mm/cache-v7m.S
index 14d719eba729..7f9cfad2ea21 100644
--- a/arch/arm/mm/cache-v7m.S
+++ b/arch/arm/mm/cache-v7m.S
@@ -286,7 +286,7 @@ SYM_FUNC_END(v7m_flush_user_cache_range)
  *	- the Icache does not read data from the write buffer
  */
 SYM_TYPED_FUNC_START(v7m_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v7m_coherent_user_range
 #endif
 SYM_FUNC_END(v7m_coherent_kern_range)
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 7ddd82b9fe8b..ed843bb22020 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -67,7 +67,7 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from,
 	struct folio *src = page_folio(from);
 	void *kto = kmap_atomic(to);
 
-	if (!test_and_set_bit(PG_dcache_clean, &src->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &src->flags.f))
 		__flush_dcache_folio(folio_flush_mapping(src), src);
 
 	raw_spin_lock(&minicache_lock);
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index a1a71f36d850..0710dba5c0bf 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -73,7 +73,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to,
 	unsigned int offset = CACHE_COLOUR(vaddr);
 	unsigned long kfrom, kto;
 
-	if (!test_and_set_bit(PG_dcache_clean, &src->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &src->flags.f))
 		__flush_dcache_folio(folio_flush_mapping(src), src);
 
 	/* FIXME: not highmem safe */
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index f1e29d3e8193..e16af68d709f 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -87,7 +87,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
 	struct folio *src = page_folio(from);
 	void *kto = kmap_atomic(to);
 
-	if (!test_and_set_bit(PG_dcache_clean, &src->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &src->flags.f))
 		__flush_dcache_folio(folio_flush_mapping(src), src);
 
 	raw_spin_lock(&minicache_lock);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 88c2d68a69c9..a4c765d24692 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -624,16 +624,14 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 	kfree(buf);
 }
 
-static void dma_cache_maint_page(struct page *page, unsigned long offset,
-	size_t size, enum dma_data_direction dir,
+static void dma_cache_maint_page(phys_addr_t phys, size_t size,
+	enum dma_data_direction dir,
 	void (*op)(const void *, size_t, int))
 {
-	unsigned long pfn;
+	unsigned long offset = offset_in_page(phys);
+	unsigned long pfn = __phys_to_pfn(phys);
 	size_t left = size;
 
-	pfn = page_to_pfn(page) + offset / PAGE_SIZE;
-	offset %= PAGE_SIZE;
-
 	/*
 	 * A single sg entry may refer to multiple physically contiguous
 	 * pages.  But we still need to process highmem pages individually.
@@ -644,17 +642,18 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 		size_t len = left;
 		void *vaddr;
 
-		page = pfn_to_page(pfn);
-
-		if (PageHighMem(page)) {
+		phys = __pfn_to_phys(pfn);
+		if (PhysHighMem(phys)) {
 			if (len + offset > PAGE_SIZE)
 				len = PAGE_SIZE - offset;
 
 			if (cache_is_vipt_nonaliasing()) {
-				vaddr = kmap_atomic(page);
+				vaddr = kmap_atomic_pfn(pfn);
 				op(vaddr + offset, len, dir);
 				kunmap_atomic(vaddr);
 			} else {
+				struct page *page = phys_to_page(phys);
+
 				vaddr = kmap_high_get(page);
 				if (vaddr) {
 					op(vaddr + offset, len, dir);
@@ -662,7 +661,8 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 				}
 			}
 		} else {
-			vaddr = page_address(page) + offset;
+			phys += offset;
+			vaddr = phys_to_virt(phys);
 			op(vaddr, len, dir);
 		}
 		offset = 0;
@@ -676,14 +676,11 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
  * Note: Drivers should NOT use this function directly.
  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
  */
-static void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
-	size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+			      enum dma_data_direction dir)
 {
-	phys_addr_t paddr;
+	dma_cache_maint_page(paddr, size, dir, dmac_map_area);
 
-	dma_cache_maint_page(page, off, size, dir, dmac_map_area);
-
-	paddr = page_to_phys(page) + off;
 	if (dir == DMA_FROM_DEVICE) {
 		outer_inv_range(paddr, paddr + size);
 	} else {
@@ -692,17 +689,15 @@ static void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
 	/* FIXME: non-speculating: flush on bidirectional mappings? */
 }
 
-static void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
-	size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+			   enum dma_data_direction dir)
 {
-	phys_addr_t paddr = page_to_phys(page) + off;
-
 	/* FIXME: non-speculating: not required */
 	/* in any case, don't bother invalidating if DMA to device */
 	if (dir != DMA_TO_DEVICE) {
 		outer_inv_range(paddr, paddr + size);
 
-		dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
+		dma_cache_maint_page(paddr, size, dir, dmac_unmap_area);
 	}
 
 	/*
@@ -718,7 +713,7 @@ static void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
 			if (size < sz)
 				break;
 			if (!offset)
-				set_bit(PG_dcache_clean, &folio->flags);
+				set_bit(PG_dcache_clean, &folio->flags.f);
 			offset = 0;
 			size -= sz;
 			if (!size)
@@ -737,6 +732,9 @@ static int __dma_info_to_prot(enum dma_data_direction dir, unsigned long attrs)
 	if (attrs & DMA_ATTR_PRIVILEGED)
 		prot |= IOMMU_PRIV;
 
+	if (attrs & DMA_ATTR_MMIO)
+		prot |= IOMMU_MMIO;
+
 	switch (dir) {
 	case DMA_BIDIRECTIONAL:
 		return prot | IOMMU_READ | IOMMU_WRITE;
@@ -1205,7 +1203,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 		unsigned int len = PAGE_ALIGN(s->offset + s->length);
 
 		if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-			__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
+			arch_sync_dma_for_device(sg_phys(s), s->length, dir);
 
 		prot = __dma_info_to_prot(dir, attrs);
 
@@ -1307,8 +1305,7 @@ static void arm_iommu_unmap_sg(struct device *dev,
 			__iommu_remove_mapping(dev, sg_dma_address(s),
 					       sg_dma_len(s));
 		if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-			__dma_page_dev_to_cpu(sg_page(s), s->offset,
-					      s->length, dir);
+			arch_sync_dma_for_cpu(sg_phys(s), s->length, dir);
 	}
 }
 
@@ -1330,7 +1327,7 @@ static void arm_iommu_sync_sg_for_cpu(struct device *dev,
 		return;
 
 	for_each_sg(sg, s, nents, i)
-		__dma_page_dev_to_cpu(sg_page(s), s->offset, s->length, dir);
+		arch_sync_dma_for_cpu(sg_phys(s), s->length, dir);
 
 }
 
@@ -1352,29 +1349,31 @@ static void arm_iommu_sync_sg_for_device(struct device *dev,
 		return;
 
 	for_each_sg(sg, s, nents, i)
-		__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
+		arch_sync_dma_for_device(sg_phys(s), s->length, dir);
 }
 
 /**
- * arm_iommu_map_page
+ * arm_iommu_map_phys
  * @dev: valid struct device pointer
- * @page: page that buffer resides in
- * @offset: offset into page for start of buffer
+ * @phys: physical address that buffer resides in
  * @size: size of buffer to map
  * @dir: DMA transfer direction
+ * @attrs: DMA mapping attributes
  *
  * IOMMU aware version of arm_dma_map_page()
  */
-static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size, enum dma_data_direction dir,
-	     unsigned long attrs)
+static dma_addr_t arm_iommu_map_phys(struct device *dev, phys_addr_t phys,
+	     size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
+	int len = PAGE_ALIGN(size + offset_in_page(phys));
+	phys_addr_t addr = phys & PAGE_MASK;
 	dma_addr_t dma_addr;
-	int ret, prot, len = PAGE_ALIGN(size + offset);
+	int ret, prot;
 
-	if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		__dma_page_cpu_to_dev(page, offset, size, dir);
+	if (!dev->dma_coherent &&
+	    !(attrs & (DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_MMIO)))
+		arch_sync_dma_for_device(phys, size, dir);
 
 	dma_addr = __alloc_iova(mapping, len);
 	if (dma_addr == DMA_MAPPING_ERROR)
@@ -1382,12 +1381,11 @@ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
 
 	prot = __dma_info_to_prot(dir, attrs);
 
-	ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len,
-			prot, GFP_KERNEL);
+	ret = iommu_map(mapping->domain, dma_addr, addr, len, prot, GFP_KERNEL);
 	if (ret < 0)
 		goto fail;
 
-	return dma_addr + offset;
+	return dma_addr + offset_in_page(phys);
 fail:
 	__free_iova(mapping, dma_addr, len);
 	return DMA_MAPPING_ERROR;
@@ -1399,82 +1397,27 @@ fail:
  * @handle: DMA address of buffer
  * @size: size of buffer (same as passed to dma_map_page)
  * @dir: DMA transfer direction (same as passed to dma_map_page)
+ * @attrs: DMA mapping attributes
  *
- * IOMMU aware version of arm_dma_unmap_page()
+ * IOMMU aware version of arm_dma_unmap_phys()
  */
-static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle,
+static void arm_iommu_unmap_phys(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	dma_addr_t iova = handle & PAGE_MASK;
-	struct page *page;
 	int offset = handle & ~PAGE_MASK;
 	int len = PAGE_ALIGN(size + offset);
 
 	if (!iova)
 		return;
 
-	if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
-		page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
-		__dma_page_dev_to_cpu(page, offset, size, dir);
-	}
-
-	iommu_unmap(mapping->domain, iova, len);
-	__free_iova(mapping, iova, len);
-}
-
-/**
- * arm_iommu_map_resource - map a device resource for DMA
- * @dev: valid struct device pointer
- * @phys_addr: physical address of resource
- * @size: size of resource to map
- * @dir: DMA transfer direction
- */
-static dma_addr_t arm_iommu_map_resource(struct device *dev,
-		phys_addr_t phys_addr, size_t size,
-		enum dma_data_direction dir, unsigned long attrs)
-{
-	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
-	dma_addr_t dma_addr;
-	int ret, prot;
-	phys_addr_t addr = phys_addr & PAGE_MASK;
-	unsigned int offset = phys_addr & ~PAGE_MASK;
-	size_t len = PAGE_ALIGN(size + offset);
-
-	dma_addr = __alloc_iova(mapping, len);
-	if (dma_addr == DMA_MAPPING_ERROR)
-		return dma_addr;
-
-	prot = __dma_info_to_prot(dir, attrs) | IOMMU_MMIO;
-
-	ret = iommu_map(mapping->domain, dma_addr, addr, len, prot, GFP_KERNEL);
-	if (ret < 0)
-		goto fail;
-
-	return dma_addr + offset;
-fail:
-	__free_iova(mapping, dma_addr, len);
-	return DMA_MAPPING_ERROR;
-}
+	if (!dev->dma_coherent &&
+	    !(attrs & (DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_MMIO))) {
+		phys_addr_t phys = iommu_iova_to_phys(mapping->domain, iova);
 
-/**
- * arm_iommu_unmap_resource - unmap a device DMA resource
- * @dev: valid struct device pointer
- * @dma_handle: DMA address to resource
- * @size: size of resource to map
- * @dir: DMA transfer direction
- */
-static void arm_iommu_unmap_resource(struct device *dev, dma_addr_t dma_handle,
-		size_t size, enum dma_data_direction dir,
-		unsigned long attrs)
-{
-	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
-	dma_addr_t iova = dma_handle & PAGE_MASK;
-	unsigned int offset = dma_handle & ~PAGE_MASK;
-	size_t len = PAGE_ALIGN(size + offset);
-
-	if (!iova)
-		return;
+		arch_sync_dma_for_cpu(phys + offset, size, dir);
+	}
 
 	iommu_unmap(mapping->domain, iova, len);
 	__free_iova(mapping, iova, len);
@@ -1485,14 +1428,14 @@ static void arm_iommu_sync_single_for_cpu(struct device *dev,
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	dma_addr_t iova = handle & PAGE_MASK;
-	struct page *page;
 	unsigned int offset = handle & ~PAGE_MASK;
+	phys_addr_t phys;
 
 	if (dev->dma_coherent || !iova)
 		return;
 
-	page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
-	__dma_page_dev_to_cpu(page, offset, size, dir);
+	phys = iommu_iova_to_phys(mapping->domain, iova);
+	arch_sync_dma_for_cpu(phys + offset, size, dir);
 }
 
 static void arm_iommu_sync_single_for_device(struct device *dev,
@@ -1500,14 +1443,14 @@ static void arm_iommu_sync_single_for_device(struct device *dev,
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	dma_addr_t iova = handle & PAGE_MASK;
-	struct page *page;
 	unsigned int offset = handle & ~PAGE_MASK;
+	phys_addr_t phys;
 
 	if (dev->dma_coherent || !iova)
 		return;
 
-	page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
-	__dma_page_cpu_to_dev(page, offset, size, dir);
+	phys = iommu_iova_to_phys(mapping->domain, iova);
+	arch_sync_dma_for_device(phys + offset, size, dir);
 }
 
 static const struct dma_map_ops iommu_ops = {
@@ -1516,8 +1459,8 @@ static const struct dma_map_ops iommu_ops = {
 	.mmap		= arm_iommu_mmap_attrs,
 	.get_sgtable	= arm_iommu_get_sgtable,
 
-	.map_page		= arm_iommu_map_page,
-	.unmap_page		= arm_iommu_unmap_page,
+	.map_phys		= arm_iommu_map_phys,
+	.unmap_phys		= arm_iommu_unmap_phys,
 	.sync_single_for_cpu	= arm_iommu_sync_single_for_cpu,
 	.sync_single_for_device	= arm_iommu_sync_single_for_device,
 
@@ -1525,9 +1468,6 @@ static const struct dma_map_ops iommu_ops = {
 	.unmap_sg		= arm_iommu_unmap_sg,
 	.sync_sg_for_cpu	= arm_iommu_sync_sg_for_cpu,
 	.sync_sg_for_device	= arm_iommu_sync_sg_for_device,
-
-	.map_resource		= arm_iommu_map_resource,
-	.unmap_resource		= arm_iommu_unmap_resource,
 };
 
 /**
@@ -1794,20 +1734,6 @@ void arch_teardown_dma_ops(struct device *dev)
 	set_dma_ops(dev, NULL);
 }
 
-void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
-		enum dma_data_direction dir)
-{
-	__dma_page_cpu_to_dev(phys_to_page(paddr), paddr & (PAGE_SIZE - 1),
-			      size, dir);
-}
-
-void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
-		enum dma_data_direction dir)
-{
-	__dma_page_dev_to_cpu(phys_to_page(paddr), paddr & (PAGE_SIZE - 1),
-			      size, dir);
-}
-
 void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		gfp_t gfp, unsigned long attrs)
 {
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 2bec87c3327d..91e488767783 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -62,7 +62,7 @@ static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address,
 }
 
 static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
-		      unsigned long pfn, struct vm_fault *vmf)
+		      unsigned long pfn, bool need_lock)
 {
 	spinlock_t *ptl;
 	pgd_t *pgd;
@@ -99,12 +99,11 @@ again:
 	if (!pte)
 		return 0;
 
-	/*
-	 * If we are using split PTE locks, then we need to take the page
-	 * lock here.  Otherwise we are using shared mm->page_table_lock
-	 * which is already locked, thus cannot take it.
-	 */
-	if (ptl != vmf->ptl) {
+	if (need_lock) {
+		/*
+		 * Use nested version here to indicate that we are already
+		 * holding one similar spinlock.
+		 */
 		spin_lock_nested(ptl, SINGLE_DEPTH_NESTING);
 		if (unlikely(!pmd_same(pmdval, pmdp_get_lockless(pmd)))) {
 			pte_unmap_unlock(pte, ptl);
@@ -114,7 +113,7 @@ again:
 
 	ret = do_adjust_pte(vma, address, pfn, pte);
 
-	if (ptl != vmf->ptl)
+	if (need_lock)
 		spin_unlock(ptl);
 	pte_unmap(pte);
 
@@ -123,9 +122,10 @@ again:
 
 static void
 make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
-	      unsigned long addr, pte_t *ptep, unsigned long pfn,
-	      struct vm_fault *vmf)
+	      unsigned long addr, pte_t *ptep, unsigned long pfn)
 {
+	const unsigned long pmd_start_addr = ALIGN_DOWN(addr, PMD_SIZE);
+	const unsigned long pmd_end_addr = pmd_start_addr + PMD_SIZE;
 	struct mm_struct *mm = vma->vm_mm;
 	struct vm_area_struct *mpnt;
 	unsigned long offset;
@@ -142,6 +142,14 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
 	flush_dcache_mmap_lock(mapping);
 	vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) {
 		/*
+		 * If we are using split PTE locks, then we need to take the pte
+		 * lock. Otherwise we are using shared mm->page_table_lock which
+		 * is already locked, thus cannot take it.
+		 */
+		bool need_lock = IS_ENABLED(CONFIG_SPLIT_PTE_PTLOCKS);
+		unsigned long mpnt_addr;
+
+		/*
 		 * If this VMA is not in our MM, we can ignore it.
 		 * Note that we intentionally mask out the VMA
 		 * that we are fixing up.
@@ -151,7 +159,12 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
 		if (!(mpnt->vm_flags & VM_MAYSHARE))
 			continue;
 		offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
-		aliases += adjust_pte(mpnt, mpnt->vm_start + offset, pfn, vmf);
+		mpnt_addr = mpnt->vm_start + offset;
+
+		/* Avoid deadlocks by not grabbing the same PTE lock again. */
+		if (mpnt_addr >= pmd_start_addr && mpnt_addr < pmd_end_addr)
+			need_lock = false;
+		aliases += adjust_pte(mpnt, mpnt_addr, pfn, need_lock);
 	}
 	flush_dcache_mmap_unlock(mapping);
 	if (aliases)
@@ -190,11 +203,11 @@ void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
 
 	folio = page_folio(pfn_to_page(pfn));
 	mapping = folio_flush_mapping(folio);
-	if (!test_and_set_bit(PG_dcache_clean, &folio->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &folio->flags.f))
 		__flush_dcache_folio(mapping, folio);
 	if (mapping) {
 		if (cache_is_vivt())
-			make_coherent(mapping, vma, addr, ptep, pfn, vmf);
+			make_coherent(mapping, vma, addr, ptep, pfn);
 		else if (vma->vm_flags & VM_EXEC)
 			__flush_icache_all();
 	}
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index ab01b51de559..2bc828a1940c 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -135,8 +135,7 @@ static void die_kernel_fault(const char *msg, struct mm_struct *mm,
 	bust_spinlocks(1);
 	pr_alert("8<--- cut here ---\n");
 	pr_alert("Unable to handle kernel %s at virtual address %08lx when %s\n",
-		 msg, addr, fsr & FSR_LNX_PF ? "execute" :
-		 fsr & FSR_WRITE ? "write" : "read");
+		 msg, addr, fsr & FSR_LNX_PF ? "execute" : str_write_read(fsr & FSR_WRITE));
 
 	show_pte(KERN_ALERT, mm, addr);
 	die("Oops", regs, fsr);
@@ -268,7 +267,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	int sig, code;
 	vm_fault_t fault;
 	unsigned int flags = FAULT_FLAG_DEFAULT;
-	unsigned long vm_flags = VM_ACCESS_FLAGS;
+	vm_flags_t vm_flags = VM_ACCESS_FLAGS;
 
 	if (kprobe_page_fault(regs, fsr))
 		return 0;
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 0749cf8a6637..19470d938b23 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -227,9 +227,9 @@ void __flush_dcache_folio(struct address_space *mapping, struct folio *folio)
 	}
 
 	/*
-	 * If this is a page cache page, and we have an aliasing VIPT cache,
+	 * If this is a page cache folio, and we have an aliasing VIPT cache,
 	 * we only need to do one flush - which would be at the relevant
-	 * userspace colour, which is congruent with page->index.
+	 * userspace colour, which is congruent with folio->index.
 	 */
 	if (mapping && cache_is_vipt_aliasing())
 		flush_pfn_alias(folio_pfn(folio), folio_pos(folio));
@@ -304,7 +304,7 @@ void __sync_icache_dcache(pte_t pteval)
 	else
 		mapping = NULL;
 
-	if (!test_and_set_bit(PG_dcache_clean, &folio->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &folio->flags.f))
 		__flush_dcache_folio(mapping, folio);
 
 	if (pte_exec(pteval))
@@ -343,8 +343,8 @@ void flush_dcache_folio(struct folio *folio)
 		return;
 
 	if (!cache_ops_need_broadcast() && cache_is_vipt_nonaliasing()) {
-		if (test_bit(PG_dcache_clean, &folio->flags))
-			clear_bit(PG_dcache_clean, &folio->flags);
+		if (test_bit(PG_dcache_clean, &folio->flags.f))
+			clear_bit(PG_dcache_clean, &folio->flags.f);
 		return;
 	}
 
@@ -352,14 +352,14 @@ void flush_dcache_folio(struct folio *folio)
 
 	if (!cache_ops_need_broadcast() &&
 	    mapping && !folio_mapped(folio))
-		clear_bit(PG_dcache_clean, &folio->flags);
+		clear_bit(PG_dcache_clean, &folio->flags.f);
 	else {
 		__flush_dcache_folio(mapping, folio);
 		if (mapping && cache_is_vivt())
 			__flush_dcache_aliases(mapping, folio);
 		else if (mapping)
 			__flush_icache_all();
-		set_bit(PG_dcache_clean, &folio->flags);
+		set_bit(PG_dcache_clean, &folio->flags.f);
 	}
 }
 EXPORT_SYMBOL(flush_dcache_folio);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 5345d218899a..54bdca025c9f 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -237,56 +237,17 @@ static inline void poison_init_mem(void *s, size_t count)
 		*p++ = 0xe7fddef0;
 }
 
-static void __init free_highpages(void)
-{
-#ifdef CONFIG_HIGHMEM
-	unsigned long max_low = max_low_pfn;
-	phys_addr_t range_start, range_end;
-	u64 i;
-
-	/* set highmem page free */
-	for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE,
-				&range_start, &range_end, NULL) {
-		unsigned long start = PFN_UP(range_start);
-		unsigned long end = PFN_DOWN(range_end);
-
-		/* Ignore complete lowmem entries */
-		if (end <= max_low)
-			continue;
-
-		/* Truncate partial highmem entries */
-		if (start < max_low)
-			start = max_low;
-
-		for (; start < end; start++)
-			free_highmem_page(pfn_to_page(start));
-	}
-#endif
-}
-
-/*
- * mem_init() marks the free areas in the mem_map and tells us how much
- * memory is free.  This is done after various parts of the system have
- * claimed their memory after the kernel image.
- */
-void __init mem_init(void)
+void __init arch_mm_preinit(void)
 {
 #ifdef CONFIG_ARM_LPAE
 	swiotlb_init(max_pfn > arm_dma_pfn_limit, SWIOTLB_VERBOSE);
 #endif
 
-	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
-
-	/* this will put all unused low memory onto the freelists */
-	memblock_free_all();
-
 #ifdef CONFIG_SA1111
 	/* now that our DMA memory is actually so designated, we can free it */
-	free_reserved_area(__va(PHYS_OFFSET), swapper_pg_dir, -1, NULL);
+	memblock_phys_free(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
 #endif
 
-	free_highpages();
-
 	/*
 	 * Check boundaries twice: Some fundamental inconsistencies can
 	 * be detected at build time already.
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 89f1c97f3079..27e64f782cb3 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -436,7 +436,7 @@ void __arm_iomem_set_ro(void __iomem *ptr, size_t size)
 	set_memory_ro((unsigned long)ptr, PAGE_ALIGN(size) / PAGE_SIZE);
 }
 
-void *arch_memremap_wb(phys_addr_t phys_addr, size_t size)
+void *arch_memremap_wb(phys_addr_t phys_addr, size_t size, unsigned long flags)
 {
 	return (__force void *)arch_ioremap_caller(phys_addr, size,
 						   MT_MEMORY_RW,
@@ -515,7 +515,5 @@ void __init early_ioremap_init(void)
 bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
 				 unsigned long flags)
 {
-	unsigned long pfn = PHYS_PFN(offset);
-
-	return memblock_is_map_memory(pfn);
+	return memblock_is_map_memory(offset);
 }
diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c
index 111d4f703136..c6625e808bf8 100644
--- a/arch/arm/mm/kasan_init.c
+++ b/arch/arm/mm/kasan_init.c
@@ -300,6 +300,6 @@ void __init kasan_init(void)
 	local_flush_tlb_all();
 
 	memset(kasan_early_shadow_page, 0, PAGE_SIZE);
-	pr_info("Kernel address sanitizer initialized\n");
 	init_task.kasan_depth = 0;
+	kasan_init_generic();
 }
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index f5b7a16c5803..8bac96e205ac 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -726,13 +726,8 @@ EXPORT_SYMBOL(phys_mem_access_prot);
 
 static void __init *early_alloc(unsigned long sz)
 {
-	void *ptr = memblock_alloc(sz, sz);
+	return memblock_alloc_or_panic(sz, sz);
 
-	if (!ptr)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, sz, sz);
-
-	return ptr;
 }
 
 static void *__init late_alloc(unsigned long sz)
@@ -740,9 +735,9 @@ static void *__init late_alloc(unsigned long sz)
 	void *ptdesc = pagetable_alloc(GFP_PGTABLE_KERNEL & ~__GFP_HIGHMEM,
 			get_order(sz));
 
-	if (!ptdesc || !pagetable_pte_ctor(ptdesc))
+	if (!ptdesc || !pagetable_pte_ctor(NULL, ptdesc))
 		BUG();
-	return ptdesc_to_virt(ptdesc);
+	return ptdesc_address(ptdesc);
 }
 
 static pte_t * __init arm_pte_alloc(pmd_t *pmd, unsigned long addr,
@@ -1027,10 +1022,7 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 	if (!nr)
 		return;
 
-	svm = memblock_alloc(sizeof(*svm) * nr, __alignof__(*svm));
-	if (!svm)
-		panic("%s: Failed to allocate %zu bytes align=0x%zx\n",
-		      __func__, sizeof(*svm) * nr, __alignof__(*svm));
+	svm = memblock_alloc_or_panic(sizeof(*svm) * nr, __alignof__(*svm));
 
 	for (md = io_desc; nr; md++, nr--) {
 		create_mapping(md);
@@ -1052,10 +1044,7 @@ void __init vm_reserve_area_early(unsigned long addr, unsigned long size,
 	struct vm_struct *vm;
 	struct static_vm *svm;
 
-	svm = memblock_alloc(sizeof(*svm), __alignof__(*svm));
-	if (!svm)
-		panic("%s: Failed to allocate %zu bytes align=0x%zx\n",
-		      __func__, sizeof(*svm), __alignof__(*svm));
+	svm = memblock_alloc_or_panic(sizeof(*svm), __alignof__(*svm));
 
 	vm = &svm->vm;
 	vm->addr = (void *)addr;
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index c415f3859b20..d638cc87807e 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -162,10 +162,7 @@ void __init paging_init(const struct machine_desc *mdesc)
 	mpu_setup();
 
 	/* allocate the zero page. */
-	zero_page = (void *)memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!zero_page)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
+	zero_page = (void *)memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 
 	bootmem_init();
 
@@ -251,7 +248,7 @@ void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size)
 EXPORT_SYMBOL_GPL(pci_remap_cfgspace);
 #endif
 
-void *arch_memremap_wb(phys_addr_t phys_addr, size_t size)
+void *arch_memremap_wb(phys_addr_t phys_addr, size_t size, unsigned long flags)
 {
 	return (void *)phys_addr;
 }
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index f8e9bc58a84f..4eb81b7ed03a 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -17,11 +17,11 @@
 #include "mm.h"
 
 #ifdef CONFIG_ARM_LPAE
-#define __pgd_alloc()	kmalloc_array(PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL)
-#define __pgd_free(pgd)	kfree(pgd)
+#define _pgd_alloc(mm)		kmalloc_array(PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL | __GFP_ZERO)
+#define _pgd_free(mm, pgd)	kfree(pgd)
 #else
-#define __pgd_alloc()	(pgd_t *)__get_free_pages(GFP_KERNEL, 2)
-#define __pgd_free(pgd)	free_pages((unsigned long)pgd, 2)
+#define _pgd_alloc(mm)		__pgd_alloc(mm, 2)
+#define _pgd_free(mm, pgd)	__pgd_free(mm, pgd)
 #endif
 
 /*
@@ -35,12 +35,10 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 	pmd_t *new_pmd, *init_pmd;
 	pte_t *new_pte, *init_pte;
 
-	new_pgd = __pgd_alloc();
+	new_pgd = _pgd_alloc(mm);
 	if (!new_pgd)
 		goto no_pgd;
 
-	memset(new_pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
-
 	/*
 	 * Copy over the kernel and IO PGD entries
 	 */
@@ -134,7 +132,7 @@ no_pmd:
 no_pud:
 	p4d_free(mm, new_p4d);
 no_p4d:
-	__pgd_free(new_pgd);
+	_pgd_free(mm, new_pgd);
 no_pgd:
 	return NULL;
 }
@@ -207,5 +205,5 @@ no_pgd:
 		p4d_free(mm, p4d);
 	}
 #endif
-	__pgd_free(pgd_base);
+	_pgd_free(mm, pgd_base);
 }
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index d0ce3414a13e..4612a4961e81 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -203,7 +203,7 @@ SYM_FUNC_END(arm1020_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm1020_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm1020_coherent_user_range
 #endif
 SYM_FUNC_END(arm1020_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 64f031bf6eff..b4a8a3a8eda3 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -200,7 +200,7 @@ SYM_FUNC_END(arm1020e_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm1020e_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm1020e_coherent_user_range
 #endif
 SYM_FUNC_END(arm1020e_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 42ed5ed07252..709870e99e19 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -199,7 +199,7 @@ SYM_FUNC_END(arm1022_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm1022_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm1022_coherent_user_range
 #endif
 SYM_FUNC_END(arm1022_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index b3ae62cd553a..02f7370a8c5c 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -194,7 +194,7 @@ SYM_FUNC_END(arm1026_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm1026_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm1026_coherent_user_range
 #endif
 SYM_FUNC_END(arm1026_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index a30df54ad5fa..4727f4b5b6e8 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -180,7 +180,7 @@ SYM_FUNC_END(arm920_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm920_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm920_coherent_user_range
 #endif
 SYM_FUNC_END(arm920_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index aac4e048100d..5a4a3f4f2683 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -182,7 +182,7 @@ SYM_FUNC_END(arm922_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm922_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm922_coherent_user_range
 #endif
 SYM_FUNC_END(arm922_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 035941faeb2e..1c4830afe1d3 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -229,7 +229,7 @@ SYM_FUNC_END(arm925_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm925_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm925_coherent_user_range
 #endif
 SYM_FUNC_END(arm925_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 6f43d6af2d9a..a09cc3e02efd 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -192,7 +192,7 @@ SYM_FUNC_END(arm926_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm926_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm926_coherent_user_range
 #endif
 SYM_FUNC_END(arm926_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 0d30bb25c42b..545c076c36d2 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -153,7 +153,7 @@ SYM_FUNC_END(arm940_coherent_kern_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm940_coherent_user_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm940_flush_kern_dcache_area
 #endif
 SYM_FUNC_END(arm940_coherent_user_range)
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 27750ace2ced..f3d4e18c3fba 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -173,7 +173,7 @@ SYM_FUNC_END(arm946_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm946_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm946_coherent_user_range
 #endif
 SYM_FUNC_END(arm946_coherent_kern_range)
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index f67b2ffac854..7f08d06c9625 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -208,7 +208,7 @@ SYM_FUNC_END(feroceon_flush_user_cache_range)
  */
 	.align	5
 SYM_TYPED_FUNC_START(feroceon_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	feroceon_coherent_user_range
 #endif
 SYM_FUNC_END(feroceon_coherent_kern_range)
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 8e9f38da863a..4669c63e3121 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -163,7 +163,7 @@ SYM_FUNC_END(mohawk_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(mohawk_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	mohawk_coherent_user_range
 #endif
 SYM_FUNC_END(mohawk_coherent_kern_range)
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 14927b380452..fd25634a2ed5 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -223,7 +223,7 @@ SYM_FUNC_END(xsc3_flush_user_cache_range)
  *	it also trashes the mini I-cache used by JTAG debuggers.
  */
 SYM_TYPED_FUNC_START(xsc3_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	xsc3_coherent_user_range
 #endif
 SYM_FUNC_END(xsc3_coherent_kern_range)
diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S
index 09ff69008d94..079774a02be6 100644
--- a/arch/arm/mm/tlb-v4.S
+++ b/arch/arm/mm/tlb-v4.S
@@ -52,7 +52,7 @@ SYM_FUNC_END(v4_flush_user_tlb_range)
  *	- start - virtual address (may not be aligned)
  *	- end   - virtual address (may not be aligned)
  */
-#ifdef CONFIG_CFI_CLANG
+#ifdef CONFIG_CFI
 SYM_TYPED_FUNC_START(v4_flush_kern_tlb_range)
 	b	.v4_flush_kern_tlb_range
 SYM_FUNC_END(v4_flush_kern_tlb_range)
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 595e9cb33c1d..49e29b7894a3 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -211,7 +211,7 @@ orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value)
 	return 0;
 }
 
-static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
+static int orion_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
 {
 	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	unsigned long flags;
@@ -219,6 +219,8 @@ static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
 	spin_lock_irqsave(&ochip->lock, flags);
 	__set_level(ochip, pin, value);
 	spin_unlock_irqrestore(&ochip->lock, flags);
+
+	return 0;
 }
 
 static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
@@ -466,14 +468,14 @@ static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 
 		if (is_out) {
 			seq_printf(s, " out %s %s\n",
-				   out & msk ? "hi" : "lo",
+				   str_hi_lo(out & msk),
 				   blink & msk ? "(blink )" : "");
 			continue;
 		}
 
 		seq_printf(s, " in  %s (act %s) - IRQ",
-			   (data_in ^ in_pol) & msk  ? "hi" : "lo",
-			   in_pol & msk ? "lo" : "hi");
+			   str_hi_lo((data_in ^ in_pol) & msk),
+			   str_lo_hi(in_pol & msk));
 		if (!((edg_msk | lvl_msk) & msk)) {
 			seq_puts(s, " disabled\n");
 			continue;
@@ -496,11 +498,10 @@ static void orion_gpio_unmask_irq(struct irq_data *d)
 	u32 reg_val;
 	u32 mask = d->mask;
 
-	irq_gc_lock(gc);
+	guard(raw_spinlock)(&gc->lock);
 	reg_val = irq_reg_readl(gc, ct->regs.mask);
 	reg_val |= mask;
 	irq_reg_writel(gc, reg_val, ct->regs.mask);
-	irq_gc_unlock(gc);
 }
 
 static void orion_gpio_mask_irq(struct irq_data *d)
@@ -510,11 +511,10 @@ static void orion_gpio_mask_irq(struct irq_data *d)
 	u32 mask = d->mask;
 	u32 reg_val;
 
-	irq_gc_lock(gc);
+	guard(raw_spinlock)(&gc->lock);
 	reg_val = irq_reg_readl(gc, ct->regs.mask);
 	reg_val &= ~mask;
 	irq_reg_writel(gc, reg_val, ct->regs.mask);
-	irq_gc_unlock(gc);
 }
 
 void __init orion_gpio_init(int gpio_base, int ngpio,
@@ -602,12 +602,12 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
 			       IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
 
 	/* Setup irq domain on top of the generic chip. */
-	ochip->domain = irq_domain_add_legacy(NULL,
-					      ochip->chip.ngpio,
-					      ochip->secondary_irq_base,
-					      ochip->secondary_irq_base,
-					      &irq_domain_simple_ops,
-					      ochip);
+	ochip->domain = irq_domain_create_legacy(NULL,
+						 ochip->chip.ngpio,
+						 ochip->secondary_irq_base,
+						 ochip->secondary_irq_base,
+						 &irq_domain_simple_ops,
+						 ochip);
 	if (!ochip->domain)
 		panic("%s: couldn't allocate irq domain (DT).\n",
 		      ochip->chip.label);
diff --git a/arch/arm/probes/uprobes/core.c b/arch/arm/probes/uprobes/core.c
index f5f790c6e5f8..3d96fb41d624 100644
--- a/arch/arm/probes/uprobes/core.c
+++ b/arch/arm/probes/uprobes/core.c
@@ -26,11 +26,11 @@ bool is_swbp_insn(uprobe_opcode_t *insn)
 		(UPROBE_SWBP_ARM_INSN & 0x0fffffff);
 }
 
-int set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm,
+int set_swbp(struct arch_uprobe *auprobe, struct vm_area_struct *vma,
 	     unsigned long vaddr)
 {
-	return uprobe_write_opcode(auprobe, mm, vaddr,
-		   __opcode_to_mem_arm(auprobe->bpinsn));
+	return uprobe_write_opcode(auprobe, vma, vaddr,
+		   __opcode_to_mem_arm(auprobe->bpinsn), true);
 }
 
 bool arch_uprobe_ignore(struct arch_uprobe *auprobe, struct pt_regs *regs)
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index 49eeb2ad8dbd..fd09afae72a2 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -481,3 +481,7 @@
 464	common	getxattrat			sys_getxattrat
 465	common	listxattrat			sys_listxattrat
 466	common	removexattrat			sys_removexattrat
+467	common	open_tree_attr			sys_open_tree_attr
+468	common	file_getattr			sys_file_getattr
+469	common	file_setattr			sys_file_setattr
+470	common	listns				sys_listns
diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile
index 8a306bbec4a0..cf8cd39ab804 100644
--- a/arch/arm/vdso/Makefile
+++ b/arch/arm/vdso/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
 # Include the generic Makefile to check the built vdso.
-include $(srctree)/lib/vdso/Makefile
+include $(srctree)/lib/vdso/Makefile.include
 
 hostprogs := vdsomunge
 
@@ -26,7 +26,7 @@ CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
 CFLAGS_REMOVE_vdso.o = -pg
 
 # Force -O2 to avoid libgcc dependencies
-CFLAGS_REMOVE_vgettimeofday.o = -pg -Os $(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS)
+CFLAGS_REMOVE_vgettimeofday.o = -pg -Os $(RANDSTRUCT_CFLAGS) $(KSTACK_ERASE_CFLAGS) $(GCC_PLUGINS_CFLAGS)
 ifeq ($(c-gettimeofday-y),)
 CFLAGS_vgettimeofday.o = -O2
 else
diff --git a/arch/arm/vdso/vdso.lds.S b/arch/arm/vdso/vdso.lds.S
index 9bfa0f52923c..7c08371f4400 100644
--- a/arch/arm/vdso/vdso.lds.S
+++ b/arch/arm/vdso/vdso.lds.S
@@ -11,16 +11,16 @@
  */
 
 #include <linux/const.h>
-#include <asm/asm-offsets.h>
 #include <asm/page.h>
 #include <asm/vdso.h>
+#include <vdso/datapage.h>
 
 OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
 OUTPUT_ARCH(arm)
 
 SECTIONS
 {
-	PROVIDE(_vdso_data = . - VDSO_DATA_SIZE);
+	VDSO_VVAR_SYMS
 
 	. = SIZEOF_HEADERS;
 
diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h
index 32090b0fb250..a2f0c47e0ce7 100644
--- a/arch/arm/vfp/vfpinstr.h
+++ b/arch/arm/vfp/vfpinstr.h
@@ -62,8 +62,6 @@
 #define FPSCR_C (1 << 29)
 #define FPSCR_V	(1 << 28)
 
-#ifdef CONFIG_AS_VFP_VMRS_FPINST
-
 #define fmrx(_vfp_) ({				\
 	u32 __v;				\
 	asm volatile (".fpu	vfpv2\n"	\
@@ -78,26 +76,6 @@
 		     : : "r" (_var_) : "cc");	\
 })
 
-#else
-
-#define vfpreg(_vfp_) #_vfp_
-
-#define fmrx(_vfp_) ({						\
-	u32 __v;						\
-	asm volatile ("mrc p10, 7, %0, " vfpreg(_vfp_) ","	\
-		      "cr0, 0 @ fmrx	%0, " #_vfp_		\
-		     : "=r" (__v) : : "cc");			\
-	__v;							\
-})
-
-#define fmxr(_vfp_, _var_) ({					\
-	asm volatile ("mcr p10, 7, %0, " vfpreg(_vfp_) ","	\
-		      "cr0, 0 @ fmxr	" #_vfp_ ", %0"		\
-		     : : "r" (_var_) : "cc");			\
-})
-
-#endif
-
 u32 vfp_single_cpdo(u32 inst, u32 fpscr);
 u32 vfp_single_cprt(u32 inst, u32 fpscr, struct pt_regs *regs);
 
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index d44867fc0c5e..e559ad3cd148 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -168,7 +168,7 @@ static void vfp_thread_copy(struct thread_info *thread)
 /*
  * When this function is called with the following 'cmd's, the following
  * is true while this function is being run:
- *  THREAD_NOFTIFY_SWTICH:
+ *  THREAD_NOTIFY_SWITCH:
  *   - the previously running thread will not be scheduled onto another CPU.
  *   - the next thread to be run (v) will not be running on another CPU.
  *   - thread->cpu is the local CPU number
@@ -877,6 +877,7 @@ void kernel_neon_begin(void)
 	 * the kernel mode NEON register contents never need to be preserved.
 	 */
 	BUG_ON(in_hardirq());
+	BUG_ON(irqs_disabled());
 	cpu = __smp_processor_id();
 
 	fpexc = fmrx(FPEXC) | FPEXC_EN;
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index a395b6c0aae2..8655bc3d3634 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -541,7 +541,7 @@ static int __init xen_late_init(void)
 	if (!xen_domain())
 		return -ENODEV;
 
-	pm_power_off = xen_power_off;
+	register_platform_power_off(xen_power_off);
 	register_restart_handler(&xen_restart_nb);
 	if (!xen_initial_domain()) {
 		struct timespec64 ts;
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 100570a048c5..93173f0a09c7 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -21,6 +21,7 @@ config ARM64
 	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_CACHE_LINE_SIZE
 	select ARCH_HAS_CC_PLATFORM
+	select ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
 	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEBUG_VM_PGTABLE
@@ -36,16 +37,17 @@ config ARM64
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
 	select ARCH_HAS_MEM_ENCRYPT
+	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
 	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_NONLEAF_PMD_YOUNG if ARM64_HAFT
-	select ARCH_HAS_PTE_DEVMAP
+	select ARCH_HAS_PREEMPT_LAZY
+	select ARCH_HAS_PTDUMP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_HW_PTE_YOUNG
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
-	select ARCH_HAS_MEM_ENCRYPT
 	select ARCH_HAS_FORCE_DMA_UNENCRYPTED
 	select ARCH_STACKWALK
 	select ARCH_HAS_STRICT_KERNEL_RWX
@@ -98,7 +100,7 @@ config ARM64
 	select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK
 	select ARCH_SUPPORTS_LTO_CLANG if CPU_LITTLE_ENDIAN
 	select ARCH_SUPPORTS_LTO_CLANG_THIN
-	select ARCH_SUPPORTS_CFI_CLANG
+	select ARCH_SUPPORTS_CFI
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_SUPPORTS_NUMA_BALANCING
@@ -106,6 +108,9 @@ config ARM64
 	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_SUPPORTS_HUGE_PFNMAP if TRANSPARENT_HUGEPAGE
 	select ARCH_SUPPORTS_RT
+	select ARCH_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_CLUSTER
+	select ARCH_SUPPORTS_SCHED_MC
 	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
 	select ARCH_WANT_DEFAULT_BPF_JIT
@@ -113,7 +118,7 @@ config ARM64
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
 	select ARCH_WANT_LD_ORPHAN_WARN
-	select ARCH_WANTS_EXECMEM_LATE if EXECMEM
+	select ARCH_WANTS_EXECMEM_LATE
 	select ARCH_WANTS_NO_INSTR
 	select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES
 	select ARCH_HAS_UBSAN
@@ -124,14 +129,15 @@ config ARM64
 	select ARM_GIC_V2M if PCI
 	select ARM_GIC_V3
 	select ARM_GIC_V3_ITS if PCI
+	select ARM_GIC_V5
 	select ARM_PSCI_FW
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select CPUMASK_OFFSTACK if NR_CPUS > 256
-	select CRC32
 	select DCACHE_WORD_ACCESS
+	select HAVE_EXTRA_IPI_TRACEPOINTS
 	select DYNAMIC_FTRACE if FUNCTION_TRACER
 	select DMA_BOUNCE_UNALIGNED_KMALLOC
 	select DMA_DIRECT_REMAP
@@ -143,23 +149,24 @@ config ARM64
 	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_CACHE_MAINTENANCE
 	select GENERIC_CPU_DEVICES
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP
+	select GENERIC_IRQ_ENTRY
 	select GENERIC_IRQ_IPI
+	select GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select GENERIC_PCI_IOMAP
-	select GENERIC_PTDUMP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_GETTIMEOFDAY
-	select GENERIC_VDSO_TIME_NS
 	select HARDIRQS_SW_RESEND
 	select HAS_IOPORT
 	select HAVE_MOVE_PMD
@@ -182,12 +189,12 @@ config ARM64
 	select HAVE_ARCH_KCSAN if EXPERT
 	select HAVE_ARCH_KFENCE
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_KSTACK_ERASE
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
 	select HAVE_ARCH_PREL32_RELOCATIONS
 	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	select HAVE_ARCH_SECCOMP_FILTER
-	select HAVE_ARCH_STACKLEAK
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
@@ -208,25 +215,27 @@ config ARM64
 	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS \
 		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
 	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
-		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \
+		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI && \
 		    (CC_IS_CLANG || !CC_OPTIMIZE_FOR_SIZE))
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
 		if DYNAMIC_FTRACE_WITH_ARGS
 	select HAVE_SAMPLE_FTRACE_DIRECT
 	select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
+	select HAVE_BUILDTIME_MCOUNT_SORT
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_GUP_FAST
-	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FTRACE_GRAPH_FUNC
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_GRAPH_TRACER
-	select HAVE_FUNCTION_GRAPH_RETVAL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && \
 		HW_PERF_EVENTS && HAVE_PERF_EVENTS_NMI
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_IOREMAP_PROT
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_LIVEPATCH
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_PERF_EVENTS
@@ -235,6 +244,7 @@ config ARM64
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_PREEMPT_DYNAMIC_KEY
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RELIABLE_STACKTRACE
 	select HAVE_POSIX_CPU_TIMERS_TASK_WORK
 	select HAVE_FUNCTION_ARG_ACCESS_API
 	select MMU_GATHER_RCU_TABLE_FREE
@@ -246,8 +256,10 @@ config ARM64
 	select HAVE_KRETPROBES
 	select HAVE_GENERIC_VDSO
 	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
+	select HOTPLUG_SMT if HOTPLUG_CPU
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
+	select JUMP_LABEL
 	select KASAN_VMALLOC if KASAN
 	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
@@ -271,6 +283,7 @@ config ARM64
 	select HAVE_SOFTIRQ_ON_OWN_STACK
 	select USER_STACKTRACE_SUPPORT
 	select VDSO_GETRANDOM
+	select VMAP_STACK
 	help
 	  ARM 64-bit (AArch64) Linux support.
 
@@ -319,15 +332,15 @@ config ARCH_MMAP_RND_BITS_MIN
 	default 18
 
 # max bits determined by the following formula:
-#  VA_BITS - PAGE_SHIFT - 3
+#  VA_BITS - PTDESC_TABLE_SHIFT
 config ARCH_MMAP_RND_BITS_MAX
 	default 19 if ARM64_VA_BITS=36
 	default 24 if ARM64_VA_BITS=39
 	default 27 if ARM64_VA_BITS=42
 	default 30 if ARM64_VA_BITS=47
-	default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
-	default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
-	default 33 if ARM64_VA_BITS=48
+	default 29 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_64K_PAGES
+	default 31 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52) && ARM64_16K_PAGES
+	default 33 if (ARM64_VA_BITS=48 || ARM64_VA_BITS=52)
 	default 14 if ARM64_64K_PAGES
 	default 16 if ARM64_16K_PAGES
 	default 18
@@ -456,6 +469,23 @@ config AMPERE_ERRATUM_AC03_CPU_38
 
 	  If unsure, say Y.
 
+config AMPERE_ERRATUM_AC04_CPU_23
+        bool "AmpereOne: AC04_CPU_23:  Failure to synchronize writes to HCR_EL2 may corrupt address translations."
+	default y
+	help
+	  This option adds an alternative code sequence to work around Ampere
+	  errata AC04_CPU_23 on AmpereOne.
+
+	  Updates to HCR_EL2 can rarely corrupt simultaneous translations for
+	  data addresses initiated by load/store instructions. Only
+	  instruction initiated translations are vulnerable, not translations
+	  from prefetches for example. A DSB before the store to HCR_EL2 is
+	  sufficient to prevent older instructions from hitting the window
+	  for corruption, and an ISB after is sufficient to prevent younger
+	  instructions from hitting the window for corruption.
+
+	  If unsure, say Y.
+
 config ARM64_WORKAROUND_CLEAN_CACHE
 	bool
 
@@ -634,9 +664,6 @@ config ARM64_ERRATUM_843419
 
 	  If unsure, say Y.
 
-config ARM64_LD_HAS_FIX_ERRATUM_843419
-	def_bool $(ld-option,--fix-cortex-a53-843419)
-
 config ARM64_ERRATUM_1024718
 	bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
 	default y
@@ -1114,6 +1141,7 @@ config ARM64_ERRATUM_3194386
 	  * ARM Neoverse-V1 erratum 3324341
 	  * ARM Neoverse V2 erratum 3324336
 	  * ARM Neoverse-V3 erratum 3312417
+	  * ARM Neoverse-V3AE erratum 3312417
 
 	  On affected cores "MSR SSBS, #0" instructions may not affect
 	  subsequent speculative instructions, which may permit unexepected
@@ -1298,6 +1326,15 @@ config NVIDIA_CARMEL_CNP_ERRATUM
 
 	  If unsure, say Y.
 
+config ROCKCHIP_ERRATUM_3568002
+	bool "Rockchip 3568002: GIC600 can not access physical addresses higher than 4GB"
+	default y
+	help
+	  The Rockchip RK3566 and RK3568 GIC600 SoC integrations have AXI
+	  addressing limited to the first 32bit of physical address space.
+
+	  If unsure, say Y.
+
 config ROCKCHIP_ERRATUM_3588001
 	bool "Rockchip 3588001: GIC600 can not support shareability attributes"
 	default y
@@ -1379,7 +1416,6 @@ config ARM64_VA_BITS_48
 
 config ARM64_VA_BITS_52
 	bool "52-bit"
-	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
 	help
 	  Enable 52-bit virtual addressing for userspace when explicitly
 	  requested via a hint to mmap(). The kernel will also use 52-bit
@@ -1431,7 +1467,6 @@ config ARM64_PA_BITS_48
 config ARM64_PA_BITS_52
 	bool "52-bit"
 	depends on ARM64_64K_PAGES || ARM64_VA_BITS_52
-	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
 	help
 	  Enable support for a 52-bit physical address space, introduced as
 	  part of the ARMv8.2-LPA extension.
@@ -1461,8 +1496,7 @@ choice
 
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
-	# https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
-	depends on AS_IS_GNU || AS_VERSION >= 150000
+	depends on BROKEN
 	help
 	  Say Y if you plan on running a kernel with a big-endian userspace.
 
@@ -1474,29 +1508,6 @@ config CPU_LITTLE_ENDIAN
 
 endchoice
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_CLUSTER
-	bool "Cluster scheduler support"
-	help
-	  Cluster scheduler support improves the CPU scheduler's decision
-	  making when dealing with machines that have clusters of CPUs.
-	  Cluster usually means a couple of CPUs which are placed closely
-	  by sharing mid-level caches, last-level cache tags or internal
-	  busses.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-4096)"
 	range 2 4096
@@ -1539,7 +1550,6 @@ source "kernel/Kconfig.hz"
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	select SPARSEMEM_VMEMMAP_ENABLE
-	select SPARSEMEM_VMEMMAP
 
 config HW_PERF_EVENTS
 	def_bool y
@@ -1587,6 +1597,9 @@ config ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG
 config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
 	def_bool y
 
+config ARCH_SUPPORTS_KEXEC_HANDOVER
+	def_bool y
+
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
@@ -1664,23 +1677,10 @@ config MITIGATE_SPECTRE_BRANCH_HISTORY
 	  When taking an exception from user-space, a sequence of branches
 	  or a firmware call overwrites the branch history.
 
-config RODATA_FULL_DEFAULT_ENABLED
-	bool "Apply r/o permissions of VM areas also to their linear aliases"
-	default y
-	help
-	  Apply read-only attributes of VM areas to the linear alias of
-	  the backing pages as well. This prevents code or read-only data
-	  from being modified (inadvertently or intentionally) via another
-	  mapping of the same memory page. This additional enhancement can
-	  be turned off at runtime by passing rodata=[off|on] (and turned on
-	  with rodata=full if this option is set to 'n')
-
-	  This requires the linear region to be mapped down to pages,
-	  which may adversely affect performance in some cases.
-
 config ARM64_SW_TTBR0_PAN
 	bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
 	depends on !KCSAN
+	select ARM64_PAN
 	help
 	  Enabling this option prevents the kernel from accessing
 	  user-space memory directly by pointing TTBR0_EL1 to a reserved
@@ -1747,7 +1747,6 @@ config COMPAT_VDSO
 	bool "Enable vDSO for 32-bit applications"
 	depends on !CPU_BIG_ENDIAN
 	depends on (CC_IS_CLANG && LD_IS_LLD) || "$(CROSS_COMPILE_COMPAT)" != ""
-	select GENERIC_COMPAT_VDSO
 	default y
 	help
 	  Place in the process address space of 32-bit applications an
@@ -1874,13 +1873,9 @@ config ARM64_PAN
 	  The feature is detected at runtime, and will remain as a 'nop'
 	  instruction if the cpu does not implement the feature.
 
-config AS_HAS_LSE_ATOMICS
-	def_bool $(as-instr,.arch_extension lse)
-
 config ARM64_LSE_ATOMICS
 	bool
 	default ARM64_USE_LSE_ATOMICS
-	depends on AS_HAS_LSE_ATOMICS
 
 config ARM64_USE_LSE_ATOMICS
 	bool "Atomic instructions"
@@ -1892,20 +1887,12 @@ config ARM64_USE_LSE_ATOMICS
 
 	  Say Y here to make use of these instructions for the in-kernel
 	  atomic routines. This incurs a small overhead on CPUs that do
-	  not support these instructions and requires the kernel to be
-	  built with binutils >= 2.25 in order for the new instructions
-	  to be used.
+	  not support these instructions.
 
 endmenu # "ARMv8.1 architectural features"
 
 menu "ARMv8.2 architectural features"
 
-config AS_HAS_ARMV8_2
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.2-a)
-
-config AS_HAS_SHA3
-	def_bool $(as-instr,.arch armv8.2-a+sha3)
-
 config ARM64_PMEM
 	bool "Enable support for persistent memory"
 	select ARCH_HAS_PMEM_API
@@ -1937,7 +1924,6 @@ config ARM64_RAS_EXTN
 config ARM64_CNP
 	bool "Enable support for Common Not Private (CNP) translations"
 	default y
-	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
 	help
 	  Common Not Private (CNP) allows translation table entries to
 	  be shared between different PEs in the same inner shareable
@@ -1980,7 +1966,6 @@ config ARM64_PTR_AUTH_KERNEL
 	bool "Use pointer authentication for kernel"
 	default y
 	depends on ARM64_PTR_AUTH
-	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_ARMV8_3
 	# Modern compilers insert a .note.gnu.property section note for PAC
 	# which is only understood by binutils starting with version 2.33.1.
 	depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100)
@@ -2001,19 +1986,10 @@ config CC_HAS_BRANCH_PROT_PAC_RET
 	# GCC 9 or later, clang 8 or later
 	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf)
 
-config CC_HAS_SIGN_RETURN_ADDRESS
-	# GCC 7, 8
-	def_bool $(cc-option,-msign-return-address=all)
-
-config AS_HAS_ARMV8_3
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a)
-
 config AS_HAS_CFI_NEGATE_RA_STATE
+	# binutils 2.34+
 	def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
 
-config AS_HAS_LDAPR
-	def_bool $(as-instr,.arch_extension rcpc)
-
 endmenu # "ARMv8.3 architectural features"
 
 menu "ARMv8.4 architectural features"
@@ -2041,19 +2017,37 @@ config ARM64_AMU_EXTN
 	  correctly reflect reality. Most commonly, the value read will be 0,
 	  indicating that the counter is not enabled.
 
-config AS_HAS_ARMV8_4
-	def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a)
-
 config ARM64_TLB_RANGE
 	bool "Enable support for tlbi range feature"
 	default y
-	depends on AS_HAS_ARMV8_4
 	help
 	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
 	  range of input addresses.
 
-	  The feature introduces new assembly instructions, and they were
-	  support when binutils >= 2.30.
+config ARM64_MPAM
+	bool "Enable support for MPAM"
+	select ARM64_MPAM_DRIVER if EXPERT	# does nothing yet
+	select ACPI_MPAM if ACPI
+	help
+	  Memory System Resource Partitioning and Monitoring (MPAM) is an
+	  optional extension to the Arm architecture that allows each
+	  transaction issued to the memory system to be labelled with a
+	  Partition identifier (PARTID) and Performance Monitoring Group
+	  identifier (PMG).
+
+	  Memory system components, such as the caches, can be configured with
+	  policies to control how much of various physical resources (such as
+	  memory bandwidth or cache memory) the transactions labelled with each
+	  PARTID can consume.  Depending on the capabilities of the hardware,
+	  the PARTID and PMG can also be used as filtering criteria to measure
+	  the memory system resource consumption of different parts of a
+	  workload.
+
+	  Use of this extension requires CPU support, support in the
+	  Memory System Components (MSC), and a description from firmware
+	  of where the MSCs are in the address space.
+
+	  MPAM is exposed to user-space via the resctrl pseudo filesystem.
 
 endmenu # "ARMv8.4 architectural features"
 
@@ -2130,9 +2124,8 @@ config ARM64_MTE
 	default y
 	depends on ARM64_AS_HAS_MTE && ARM64_TAGGED_ADDR_ABI
 	depends on AS_HAS_ARMV8_5
-	depends on AS_HAS_LSE_ATOMICS
 	# Required for tag checking in the uaccess routines
-	depends on ARM64_PAN
+	select ARM64_PAN
 	select ARCH_HAS_SUBPAGE_FAULTS
 	select ARCH_USES_HIGH_VMA_FLAGS
 	select ARCH_USES_PG_ARCH_2
@@ -2214,14 +2207,13 @@ config ARM64_HAFT
 
 endmenu # "ARMv8.9 architectural features"
 
-menu "v9.4 architectural features"
+menu "ARMv9.4 architectural features"
 
 config ARM64_GCS
 	bool "Enable support for Guarded Control Stack (GCS)"
 	default y
 	select ARCH_HAS_USER_SHADOW_STACK
 	select ARCH_USES_HIGH_VMA_FLAGS
-	depends on !UPROBES
 	help
 	  Guarded Control Stack (GCS) provides support for a separate
 	  stack with restricted access which contains only return
@@ -2233,7 +2225,7 @@ config ARM64_GCS
 	  The feature is detected at runtime, and will remain disabled
 	  if the system does not implement the feature.
 
-endmenu # "v9.4 architectural features"
+endmenu # "ARMv9.4 architectural features"
 
 config ARM64_SVE
 	bool "ARM Scalable Vector Extension support"
@@ -2270,7 +2262,6 @@ config ARM64_SME
 	bool "ARM Scalable Matrix Extension support"
 	default y
 	depends on ARM64_SVE
-	depends on BROKEN
 	help
 	  The Scalable Matrix Extension (SME) is an extension to the AArch64
 	  execution state which utilises a substantial subset of the SVE
@@ -2360,8 +2351,7 @@ config STACKPROTECTOR_PER_TASK
 
 config UNWIND_PATCH_PAC_INTO_SCS
 	bool "Enable shadow call stack dynamically using code patching"
-	# needs Clang with https://github.com/llvm/llvm-project/commit/de07cde67b5d205d58690be012106022aea6d2b3 incorporated
-	depends on CC_IS_CLANG && CLANG_VERSION >= 150000
+	depends on CC_IS_CLANG
 	depends on ARM64_PTR_AUTH_KERNEL && CC_HAS_BRANCH_PROT_PAC_RET
 	depends on SHADOW_CALL_STACK
 	select UNWIND_TABLES
@@ -2498,3 +2488,4 @@ source "drivers/acpi/Kconfig"
 
 source "arch/arm64/kvm/Kconfig"
 
+source "kernel/livepatch/Kconfig"
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 370a9d2b6919..fff14807c965 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -40,6 +40,19 @@ config ARCH_APPLE
 	  This enables support for Apple's in-house ARM SoC family, such
 	  as the Apple M1.
 
+config ARCH_ARTPEC
+	bool "Axis Communications ARTPEC SoC Family"
+	depends on ARCH_EXYNOS
+	select ARM_GIC
+	help
+	   This enables support for the ARMv8 based ARTPEC SoC Family.
+
+config ARCH_AXIADO
+	bool "Axiado SoC Family"
+	select GPIOLIB
+	help
+	  This enables support for Axiado SoC family like AX3000
+
 menuconfig ARCH_BCM
 	bool "Broadcom SoC Support"
 
@@ -101,6 +114,25 @@ config ARCH_BITMAIN
 	help
 	  This enables support for the Bitmain SoC Family.
 
+config ARCH_BLAIZE
+	bool "Blaize SoC Platforms"
+	help
+	  This enables support for the Blaize SoC family
+
+config ARCH_BST
+	bool "Black Sesame Technologies SoC Family"
+	help
+	  This enables support for Black Sesame Technologies (BST) SoC family.
+	  BST produces automotive-grade system-on-chips for intelligent driving,
+	  focusing on computer vision and AI capabilities. The BST C1200 family
+	  includes SoCs for ADAS and autonomous driving applications.
+
+config ARCH_CIX
+	bool "Cixtech SoC family"
+	help
+	  This enables support for the Cixtech SoC family,
+	  like P1(sky1).
+
 config ARCH_EXYNOS
 	bool "Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
@@ -114,29 +146,9 @@ config ARCH_EXYNOS
 	help
 	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
-config ARCH_SPARX5
-	bool "Microchip Sparx5 SoC family"
-	select PINCTRL
-	select DW_APB_TIMER_OF
-	help
-	  This enables support for the Microchip Sparx5 ARMv8-based
-	  SoC family of TSN-capable gigabit switches.
-
-	  The SparX-5 Ethernet switch family provides a rich set of
-	  switching features such as advanced TCAM-based VLAN and QoS
-	  processing enabling delivery of differentiated services, and
-	  security through TCAM-based frame processing using versatile
-	  content aware processor (VCAP).
-
 config ARCH_K3
 	bool "Texas Instruments Inc. K3 multicore SoC architecture"
-	select PM_GENERIC_DOMAINS if PM
-	select MAILBOX
 	select SOC_TI
-	select TI_MESSAGE_MANAGER
-	select TI_SCI_PROTOCOL
-	select TI_SCI_INTR_IRQCHIP
-	select TI_SCI_INTA_IRQCHIP
 	select TI_K3_SOCINFO
 	help
 	  This enables support for Texas Instruments' K3 multicore SoC
@@ -175,6 +187,51 @@ config ARCH_MESON
 	  This enables support for the arm64 based Amlogic SoCs
 	  such as the s905, S905X/D, S912, A113X/D or S905X/D2
 
+menu "Microchip SoC support"
+
+config ARCH_MICROCHIP
+	bool
+
+config ARCH_LAN969X
+	bool "Microchip LAN969X SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	select ARCH_MICROCHIP
+	help
+	  This enables support for the Microchip LAN969X ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The LAN969X Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+config ARCH_SPARX5
+	bool "Microchip Sparx5 SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	select ARCH_MICROCHIP
+	help
+	  This enables support for the Microchip Sparx5 ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The SparX-5 Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+endmenu
+
+config ARCH_MMP
+	bool "Marvell MMP SoC Family"
+	select PINCTRL
+	select PINCTRL_SINGLE
+	help
+	  This enables support for Marvell MMP SoC family, currently
+	  supporting PXA1908 aka IAP140.
+
 config ARCH_MVEBU
 	bool "Marvell EBU SoC Family"
 	select ARMADA_AP806_SYSCON
@@ -266,7 +323,8 @@ config ARCH_QCOM
 	bool "Qualcomm Platforms"
 	select GPIOLIB
 	select PINCTRL
-	select HAVE_PWRCTL if PCI
+	select HAVE_PWRCTRL if PCI
+	select HAVE_SHARED_GPIOS
 	help
 	  This enables support for the ARMv8 based Qualcomm chipsets.
 
@@ -304,11 +362,16 @@ config ARCH_INTEL_SOCFPGA
 	  Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform,
 	  Agilex and eASIC N5X.
 
+config ARCH_SOPHGO
+	bool "Sophgo SoCs"
+	select ARCH_HAS_RESET_CONTROLLER
+	help
+	  This enables support for Sophgo SoC platform hardware.
+
 config ARCH_STM32
 	bool "STMicroelectronics STM32 SoC Family"
 	select GPIOLIB
 	select PINCTRL
-	select PINCTRL_STM32MP257
 	select ARM_SMC_MBOX
 	select ARM_SCMI_PROTOCOL
 	select REGULATOR
@@ -318,6 +381,10 @@ config ARCH_STM32
 	help
 	  This enables support for ARMv8 based STMicroelectronics
 	  STM32 family, including:
+		- STM32MP21:
+			- STM32MP211, STM32MP213, STM32MP215.
+		- STM32MP23:
+			- STM32MP231, STM32MP233, STM32MP235.
 		- STM32MP25:
 			- STM32MP251, STM32MP253, STM32MP255 and STM32MP257.
 
@@ -371,13 +438,12 @@ config ARCH_UNIPHIER
 	  This enables support for Socionext UniPhier SoC family.
 
 config ARCH_VEXPRESS
-	bool "ARMv8 software model (Versatile Express)"
+	bool "ARM Ltd Platforms"
 	select GPIOLIB
 	select PM
 	select PM_GENERIC_DOMAINS
 	help
-	  This enables support for the ARMv8 software model (Versatile
-	  Express).
+	  This enables support for the ARM Ltd Platforms.
 
 config ARCH_VISCONTI
 	bool "Toshiba Visconti SoC Family"
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 358c68565bfd..73a10f65ce8b 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -16,14 +16,11 @@ ifeq ($(CONFIG_RELOCATABLE), y)
 # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
 # for relative relocs, since this leads to better Image compression
 # with the relocation offsets always being zero.
-LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
-			$(call ld-option, --no-apply-dynamic-relocs)
+LDFLAGS_vmlinux	+= -shared -Bsymbolic -z notext --no-apply-dynamic-relocs
 endif
 
 ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
 LDFLAGS_vmlinux	+= --fix-cortex-a53-843419
-  endif
 endif
 
 cc_has_k_constraint := $(call try-run,echo				\
@@ -48,7 +45,11 @@ KBUILD_CFLAGS	+= $(CC_FLAGS_NO_FPU) \
 KBUILD_CFLAGS	+= $(call cc-disable-warning, psabi)
 KBUILD_AFLAGS	+= $(compat_vdso)
 
+ifeq ($(call rustc-min-version, 108500),y)
+KBUILD_RUSTFLAGS += --target=aarch64-unknown-none-softfloat
+else
 KBUILD_RUSTFLAGS += --target=aarch64-unknown-none -Ctarget-feature="-neon"
+endif
 
 KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
 KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
@@ -101,12 +102,8 @@ endif
 # hardware.
 ifeq ($(CONFIG_AS_HAS_ARMV8_5), y)
   asm-arch := armv8.5-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
+else
   asm-arch := armv8.4-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_3), y)
-  asm-arch := armv8.3-a
-else ifeq ($(CONFIG_AS_HAS_ARMV8_2), y)
-  asm-arch := armv8.2-a
 endif
 
 ifdef asm-arch
@@ -197,16 +194,6 @@ install zinstall:
 
 archprepare:
 	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
-ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
-	@echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2
-  endif
-endif
-ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y)
-  ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y)
-	@echo "warning: LSE atomics not supported by binutils" >&2
-  endif
-endif
 
 ifeq ($(KBUILD_EXTMOD),)
 # We need to generate vdso-offsets.h before compiling certain files in kernel/.
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 21cd3a87f385..98ec8f1b76e4 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -9,9 +9,13 @@ subdir-y += amlogic
 subdir-y += apm
 subdir-y += apple
 subdir-y += arm
+subdir-y += axiado
 subdir-y += bitmain
+subdir-y += blaize
 subdir-y += broadcom
+subdir-y += bst
 subdir-y += cavium
+subdir-y += cix
 subdir-y += exynos
 subdir-y += freescale
 subdir-y += hisilicon
@@ -27,6 +31,7 @@ subdir-y += realtek
 subdir-y += renesas
 subdir-y += rockchip
 subdir-y += socionext
+subdir-y += sophgo
 subdir-y += sprd
 subdir-y += st
 subdir-y += synaptics
diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts
index cf58e43dd5b2..dae9968a4ff6 100644
--- a/arch/arm64/boot/dts/airoha/en7581-evb.dts
+++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts
@@ -24,3 +24,85 @@
 		reg = <0x0 0x80000000 0x2 0x00000000>;
 	};
 };
+
+&spi_nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bootloader@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		art@200000 {
+			label = "art";
+			reg = <0x00200000 0x00400000>;
+		};
+
+		tclinux@600000 {
+			label = "tclinux";
+			reg = <0x00600000 0x03200000>;
+		};
+
+		tclinux_slave@3800000 {
+			label = "tclinux_alt";
+			reg = <0x03800000 0x03200000>;
+		};
+
+		rootfs_data@6a00000 {
+			label = "rootfs_data";
+			reg = <0x06a00000 0x01400000>;
+		};
+
+		reserved_bmt@7e00000 {
+			label = "reserved_bmt";
+			reg = <0x07e00000 0x00200000>;
+			read-only;
+		};
+	};
+};
+
+&en7581_pinctrl {
+	gpio-ranges = <&en7581_pinctrl 0 13 47>;
+
+	pcie0_rst_pins: pcie0-rst-pins {
+		conf {
+			pins = "pcie_reset0";
+			drive-open-drain = <1>;
+		};
+	};
+
+	pcie1_rst_pins: pcie1-rst-pins {
+		conf {
+			pins = "pcie_reset1";
+			drive-open-drain = <1>;
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_rst_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_rst_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+};
+
+&gdm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi
index 55eb1762fb11..ff6908a76e8e 100644
--- a/arch/arm64/boot/dts/airoha/en7581.dtsi
+++ b/arch/arm64/boot/dts/airoha/en7581.dtsi
@@ -2,6 +2,8 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/reset/airoha,en7581-reset.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -122,6 +124,12 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	clk20m: clock-20000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -142,6 +150,141 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 		};
 
+		spi@1fa10000 {
+			compatible = "airoha,en7581-snand";
+			reg = <0x0 0x1fa10000 0x0 0x140>,
+			      <0x0 0x1fa11000 0x0 0x160>;
+
+			clocks = <&scuclk EN7523_CLK_SPI>;
+			clock-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			spi_nand: nand@0 {
+				compatible = "spi-nand";
+				reg = <0>;
+
+				spi-max-frequency = <50000000>;
+				spi-tx-bus-width = <1>;
+				spi-rx-bus-width = <2>;
+			};
+		};
+
+		scuclk: clock-controller@1fb00000 {
+			compatible = "airoha,en7581-scu";
+			reg = <0x0 0x1fb00000 0x0 0x970>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pbus_csr: syscon@1fbe3400 {
+			compatible = "airoha,en7581-pbus-csr", "syscon";
+			reg = <0x0 0x1fbe3400 0x0 0xff>;
+		};
+
+		pciephy: phy@1fa5a000 {
+			compatible = "airoha,en7581-pcie-phy";
+			reg = <0x0 0x1fa5a000 0x0 0xfff>,
+			      <0x0 0x1fa5b000 0x0 0xfff>,
+			      <0x0 0x1fa5c000 0x0 0xfff>,
+			      <0x0 0x1fc10044 0x0 0x4>,
+			      <0x0 0x1fc30044 0x0 0x4>,
+			      <0x0 0x1fc15030 0x0 0x104>;
+			reg-names = "csr-2l", "pma0", "pma1",
+				    "p0-xr-dtime", "p1-xr-dtime",
+				    "rx-aeq";
+			#phy-cells = <0>;
+		};
+
+		pcie0: pcie@1fc00000 {
+			compatible = "airoha,en7581-pcie";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0x0 0x1fc00000 0x0 0x1670>;
+			reg-names = "pcie-mac";
+
+			clocks = <&scuclk EN7523_CLK_PCIE>;
+			clock-names = "sys-ck";
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			ranges = <0x02000000 0 0x20000000 0x0 0x20000000 0 0x4000000>;
+
+			resets = <&scuclk EN7581_PCIE0_RST>,
+				 <&scuclk EN7581_PCIE1_RST>,
+				 <&scuclk EN7581_PCIE2_RST>;
+			reset-names = "phy-lane0", "phy-lane1", "phy-lane2";
+
+			mediatek,pbus-csr = <&pbus_csr 0x0 0x4>;
+
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@1fc20000 {
+			compatible = "airoha,en7581-pcie";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0x0 0x1fc20000 0x0 0x1670>;
+			reg-names = "pcie-mac";
+
+			clocks = <&scuclk EN7523_CLK_PCIE>;
+			clock-names = "sys-ck";
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			ranges = <0x02000000 0 0x24000000 0x0 0x24000000 0 0x4000000>;
+
+			resets = <&scuclk EN7581_PCIE0_RST>,
+				 <&scuclk EN7581_PCIE1_RST>,
+				 <&scuclk EN7581_PCIE2_RST>;
+			reset-names = "phy-lane0", "phy-lane1", "phy-lane2";
+
+			mediatek,pbus-csr = <&pbus_csr 0x8 0xc>;
+
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		uart1: serial@1fbf0000 {
 			compatible = "ns16550";
 			reg = <0x0 0x1fbf0000 0x0 0x30>;
@@ -150,5 +293,107 @@
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <1843200>;
 		};
+
+		rng@1faa1000 {
+			compatible = "airoha,en7581-trng";
+			reg = <0x0 0x1faa1000 0x0 0xc04>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		system-controller@1fbf0200 {
+			compatible = "airoha,en7581-gpio-sysctl", "syscon",
+				     "simple-mfd";
+			reg = <0x0 0x1fbf0200 0x0 0xc0>;
+
+			en7581_pinctrl: pinctrl {
+				compatible = "airoha,en7581-pinctrl";
+
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		i2c0: i2c@1fbf8000 {
+			compatible = "mediatek,mt7621-i2c";
+			reg = <0x0 0x1fbf8000 0x0 0x100>;
+
+			resets = <&scuclk EN7581_I2C2_RST>;
+
+			clocks = <&clk20m>;
+			clock-frequency = <100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@1fbf8100 {
+			compatible = "mediatek,mt7621-i2c";
+			reg = <0x0 0x1fbf8100 0x0 0x100>;
+
+			resets = <&scuclk EN7581_I2C_MASTER_RST>;
+
+			clocks = <&clk20m>;
+			clock-frequency = <100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		eth: ethernet@1fb50000 {
+			compatible = "airoha,en7581-eth";
+			reg = <0 0x1fb50000 0 0x2600>,
+			      <0 0x1fb54000 0 0x2000>,
+			      <0 0x1fb56000 0 0x2000>;
+			reg-names = "fe", "qdma0", "qdma1";
+
+			resets = <&scuclk EN7581_FE_RST>,
+				 <&scuclk EN7581_FE_PDMA_RST>,
+				 <&scuclk EN7581_FE_QDMA_RST>,
+				 <&scuclk EN7581_XSI_MAC_RST>,
+				 <&scuclk EN7581_DUAL_HSI0_MAC_RST>,
+				 <&scuclk EN7581_DUAL_HSI1_MAC_RST>,
+				 <&scuclk EN7581_HSI_MAC_RST>,
+				 <&scuclk EN7581_XFP_MAC_RST>;
+			reset-names = "fe", "pdma", "qdma",
+				      "xsi-mac", "hsi0-mac", "hsi1-mac",
+				      "hsi-mac", "xfp-mac";
+
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gdm1: ethernet@1 {
+				compatible = "airoha,eth-mac";
+				reg = <1>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <10000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 00bed412ee31..2edfa7bf4ab3 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h64-remix-mini-pc.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a133-liontron-h-a133l.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
@@ -40,6 +41,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
@@ -48,7 +50,12 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-yuzukihd-chameleon.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a527-cubie-a5e.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-orangepi-4a.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
index a387bccdcefd..a7e3be0155a8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-a100.dtsi"
+#include "sun50i-a100-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -38,6 +39,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &pio {
 	vcc-pb-supply = <&reg_dcdc1>;
 	vcc-pc-supply = <&reg_eldo1>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
new file mode 100644
index 000000000000..c6a2efa037dc
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+// Copyright (c) 2020 ShuoSheng Huang <huangshuosheng@allwinnertech.com>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "allwinner,sun50i-a100-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp-408000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <408000000>;
+
+			opp-microvolt-speed0 = <900000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-600000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <600000000>;
+
+			opp-microvolt-speed0 = <900000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-816000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <816000000>;
+
+			opp-microvolt-speed0 = <940000>;
+			opp-microvolt-speed1 = <900000>;
+			opp-microvolt-speed2 = <900000>;
+		};
+
+		opp-1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1080000000>;
+
+			opp-microvolt-speed0 = <1020000>;
+			opp-microvolt-speed1 = <980000>;
+			opp-microvolt-speed2 = <950000>;
+		};
+
+		opp-1200000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1200000000>;
+
+			opp-microvolt-speed0 = <1100000>;
+			opp-microvolt-speed1 = <1020000>;
+			opp-microvolt-speed2 = <1000000>;
+		};
+
+		opp-1320000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1320000000>;
+
+			opp-microvolt-speed0 = <1160000>;
+			opp-microvolt-speed1 = <1060000>;
+			opp-microvolt-speed2 = <1030000>;
+		};
+
+		opp-1464000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1464000000>;
+
+			opp-microvolt-speed0 = <1180000>;
+			opp-microvolt-speed1 = <1180000>;
+			opp-microvolt-speed2 = <1130000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index 29ac7716c7a5..bb5f9e4f3d42 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -23,6 +23,7 @@
 			device_type = "cpu";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
 		cpu1: cpu@1 {
@@ -30,6 +31,7 @@
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
 		cpu2: cpu@2 {
@@ -37,6 +39,7 @@
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
 		cpu3: cpu@3 {
@@ -44,6 +47,7 @@
 			device_type = "cpu";
 			reg = <0x3>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 	};
 
@@ -101,6 +105,39 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0x3fffffff>;
 
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-a100-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a1: sram@20000 {
+				compatible = "mmio-sram";
+				reg = <0x00020000 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00020000 0x4000>;
+			};
+
+			sram_c: sram@24000 {
+				compatible = "mmio-sram";
+				reg = <0x024000 0x21000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x024000 0x21000>;
+			};
+
+			sram_a2: sram@100000 {
+				compatible = "mmio-sram";
+				reg = <0x0100000 0x14000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x0100000 0x14000>;
+			};
+		};
+
 		ccu: clock@3001000 {
 			compatible = "allwinner,sun50i-a100-ccu";
 			reg = <0x03001000 0x1000>;
@@ -142,6 +179,10 @@
 			ths_calibration: calib@14 {
 				reg = <0x14 8>;
 			};
+
+			cpu_speed_grade: cpu-speed-grade@1c {
+				reg = <0x1c 0x2>;
+			};
 		};
 
 		watchdog@30090a0 {
@@ -195,6 +236,21 @@
 				bias-pull-up;
 			};
 
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
+			rmii0_pins: rmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB9", "PB10";
 				function = "uart0";
@@ -211,6 +267,7 @@
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -226,6 +283,7 @@
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc1_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -241,6 +299,7 @@
 			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc2_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -361,6 +420,26 @@
 			#size-cells = <0>;
 		};
 
+		emac0: ethernet@5020000 {
+			compatible = "allwinner,sun50i-a100-emac",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x5020000 0x10000>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		ths: thermal-sensor@5070400 {
 			compatible = "allwinner,sun50i-a100-ths";
 			reg = <0x05070400 0x100>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts
new file mode 100644
index 000000000000..90a50910f07b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a100.dtsi"
+#include "sun50i-a100-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "Liontron H-A133L";
+	compatible = "liontron,h-a133l", "allwinner,sun50i-a100";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from a 12V->5V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii0_pins>;
+	phy-handle = <&rmii_phy>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mdio0 {
+	reset-gpios = <&pio 7 12 GPIO_ACTIVE_LOW>; /* PH12 */
+	reset-delay-us = <2000>;
+	reset-post-delay-us = <2000>;
+
+	rmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp803: pmic@34 {
+		compatible = "x-powers,axp803";
+		reg = <0x34>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-codec-avcc";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dram-1";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-pl";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io-usb-pd-emmc";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <810000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-cpux";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-usb-cpus";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <950000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vcc-dram";
+};
+
+/* DCDC6 unused */
+/* DLDO3 unused */
+/* DLDO4 unused */
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pc-emmc";
+};
+
+/* ELDO2 unused */
+/* ELDO3 unused */
+
+&reg_fldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-cpus-usb";
+};
+
+/* reg_drivevbus unused */
+/* dc1sw unused */
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";       /* USB A type receptacle, always powered */
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 09e71fd60785..3256acec1ff9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -124,6 +124,17 @@
 	status = "okay";
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -286,6 +297,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 379c2c8466f5..86d44349e095 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -390,6 +390,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index be2347c8f267..231e652cab67 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -103,6 +103,17 @@
 	};
 };
 
+/* On Wifi/BT connector */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "disabled";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
@@ -175,6 +186,14 @@
 	status = "okay";
 };
 
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 /* On Pi-2 connector */
 &uart2 {
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index b407e1dd08a7..ec055510af8b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -369,6 +369,8 @@
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
+	assigned-clocks = <&ccu CLK_TCON0>;
+	assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index a5c3920e0f04..0fecf0abb204 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -445,6 +445,8 @@
 			clock-names = "ahb", "tcon-ch0";
 			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
+			assigned-clocks = <&ccu CLK_TCON0>;
+			assigned-clock-parents = <&ccu CLK_PLL_MIPI>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
index bafd3e803106..7906b79c0389 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-tanix-tx1.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -78,6 +79,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
new file mode 100644
index 000000000000..b2275eb3d55b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "X96Q";
+	compatible = "amediatech,x96q", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+/* TODO: EMAC1 connected to AC200 PHY */
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	/* microSD */
+	vmmc-supply = <&reg_aldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* TODO: XRadio XR819 WLAN @ mmc1 */
+
+&mmc2 {
+	/* eMMC */
+	vmmc-supply = <&reg_aldo1>;
+	vqmmc-supply = <&reg_bldo1>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <100000000>; /* required for stable operation */
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp305: pmic@36 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x36>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			dcdcb {
+				/* unused */
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+			dcdce {
+				/* unused */
+			};
+
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			aldo2 {
+				/* unused */
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			bldo2 {
+				/* unused */
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				/* unused */
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptacle */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index d3caf27b6a55..01a29c1988a6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -16,7 +16,6 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -26,7 +25,6 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -36,7 +34,6 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -46,7 +43,6 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 	};
@@ -207,7 +203,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 13a0e63afeaf..2c64d834a2c4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -152,28 +152,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * FIXME: We can't add that supply for now since it would
-	 * create a circular dependency between pinctrl, the regulator
-	 * and the RSB Bus.
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -291,6 +275,22 @@
 	};
 };
 
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spdif_tx_pin>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index ab87c3447cd7..dc7381c944c9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -144,7 +144,7 @@
 	non-removable;
 	status = "okay";
 
-	brcm: sdio-wifi@1 {
+	brcm: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
@@ -176,16 +176,12 @@
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -296,6 +292,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
index a3f65a45bd26..0911c537cc6b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -28,7 +28,7 @@
 	non-removable;
 	status = "okay";
 
-	brcm: sdio-wifi@1 {
+	brcm: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index d05dc5d6e6b9..e34dbb992021 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -113,20 +113,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -241,6 +233,14 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 2301c59b41b1..73e8604315c5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -27,7 +27,6 @@
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -44,7 +43,6 @@
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -61,7 +59,6 @@
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -78,7 +75,6 @@
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
index d12b01c5f41b..bebfeb2a337a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
@@ -67,6 +67,11 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dldo1>;
 	/* Card detection pin is not connected */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
index 908fa3b847a6..a8644fb52b04 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -77,6 +77,10 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdio0 {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
index a360d8567f95..f2e3300e078a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -24,6 +24,10 @@
 	phy-supply = <&reg_dcdce>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdce>;
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
index 968960ebf1d1..085f3e4e8eaa 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
@@ -50,6 +50,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index cdce3dcb8ec0..8d1110c14bad 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -150,6 +150,21 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun50i-h616-mali",
+				     "arm,mali-bifrost";
+			reg = <0x1800000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU0>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			power-domains = <&prcm_ppu 2>;
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
 		crypto: crypto@1904000 {
 			compatible = "allwinner,sun50i-h616-crypto";
 			reg = <0x01904000 0x800>;
@@ -290,6 +305,42 @@
 			};
 
 			/omit-if-no-ref/
+			nand_pins: nand-pins {
+				pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "nand0";
+			};
+
+			/omit-if-no-ref/
+			nand_cs0_pin: nand-cs0-pin {
+				pins = "PC4";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			nand_cs1_pin: nand-cs1-pin {
+				pins = "PC3";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			nand_rb0_pin: nand-rb0-pin {
+				pins = "PC6";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			nand_rb1_pin: nand-rb1-pin {
+				pins = "PC7";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
 			spi0_pins: spi0-pins {
 				pins = "PC0", "PC2", "PC4";
 				function = "spi0";
@@ -362,6 +413,22 @@
 			#iommu-cells = <1>;
 		};
 
+		nfc: nand-controller@4011000 {
+			compatible = "allwinner,sun50i-h616-nand-controller";
+			reg = <0x04011000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND0>,
+				 <&ccu CLK_NAND1>, <&ccu CLK_MBUS_NAND>;
+			clock-names = "ahb", "mod", "ecc", "mbus";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			dmas = <&dma 10>;
+			dma-names = "rxtx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		mmc0: mmc@4020000 {
 			compatible = "allwinner,sun50i-h616-mmc",
 				     "allwinner,sun50i-a100-mmc";
@@ -874,6 +941,12 @@
 			#reset-cells = <1>;
 		};
 
+		prcm_ppu: power-controller@7010250 {
+			compatible = "allwinner,sun50i-h616-prcm-ppu";
+			reg = <0x07010250 0x10>;
+			#power-domain-cells = <1>;
+		};
+
 		nmi_intc: interrupt-controller@7010320 {
 			compatible = "allwinner,sun50i-h616-nmi",
 				     "allwinner,sun9i-a80-nmi";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
index e92d150aaf1c..3f416d129b72 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
@@ -10,6 +10,11 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
index a0fe7a9afb77..b340bbcb710d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -69,6 +69,11 @@
 
 /* USB 2 & 3 are on the FPC connector (or the exansion board) */
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &mmc0 {
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
index e1cd7572a14c..c51d4d9120de 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -27,6 +27,10 @@
 	motorcomm,clk-out-frequency-hz = <125000000>;
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+};
+
 &mmc0 {
 	/*
 	 * The schematic shows the card detect pin wired up to PF6, via an
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
index f828ca1ce51e..efe0faa252f5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -69,6 +69,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
new file mode 100644
index 000000000000..eae56908b9b4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-yuzukihd-chameleon.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Yuzuki Chameleon";
+	compatible = "yuzukihd,chameleon", "allwinner,sun50i-h618";
+
+	aliases {
+		ethernet1 = &sdio_wifi;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; /* PG11 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	vmmc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 12 IRQ_TYPE_LEVEL_LOW>;  /* PG12 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-3_3v;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* via VCC_IO */
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* via VCC_IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 2 IRQ_TYPE_LEVEL_LOW>;	/* PC2 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* Connected to the Bluetooth UART pins of the XR829 Wifi/BT chip. */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb1_vbus-supply = <&reg_vcc5v>;
+	usb2_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
index a231abf1684a..1a750c5f6fac 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -167,6 +167,12 @@
 			gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */
 			default-state = "on";
 		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; /* PI11 */
+		};
 	};
 
 	reg_vcc5v: regulator-vcc5v { /* USB-C power input */
@@ -178,8 +184,11 @@
 };
 
 &codec {
-	allwinner,audio-routing = "Line Out", "LINEOUT";
+	/* Both speakers and headphone jack connected to 74HC4052D analog mux*/
+	allwinner,audio-routing = "Speaker", "LINEOUT",
+				  "Headphone", "LINEOUT";
 	allwinner,pa-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; // PI5
+	hp-det-gpios = <&pio 8 3 GPIO_ACTIVE_HIGH>; // PI3
 	status = "okay";
 };
 
@@ -191,6 +200,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo3>;
 	disable-wp;
@@ -237,6 +251,7 @@
 		battery_power: battery-power {
 			compatible = "x-powers,axp717-battery-power-supply";
 			monitored-battery = <&battery>;
+			x-powers,no-thermistor;
 		};
 
 		regulators {
@@ -328,8 +343,17 @@
 				regulator-name = "boost";
 			};
 
+			/*
+			 * Regulator function is unknown, but reading
+			 * GPIO values in bootloader is inconsistent
+			 * on reboot if this is disabled. Setting to
+			 * default value from regulator OTP mem.
+			 */
 			reg_cpusldo: cpusldo {
-				/* unused */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
index ff453336eab1..bef4d107482f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
@@ -71,6 +71,25 @@
 			    <&pio 8 2 GPIO_ACTIVE_LOW>;
 		#mux-control-cells = <0>;
 	};
+
+	reg_vcc3v8_usb: regulator-vcc3v8-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 4 5 GPIO_ACTIVE_HIGH>; /* PE5 */
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc3v8-usb";
+	};
+
+	reg_vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 8 7 GPIO_ACTIVE_HIGH>; /* PI7 */
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0-usb";
+		vin-supply = <&reg_vcc3v8_usb>;
+	};
 };
 
 &gpadc {
@@ -113,3 +132,7 @@
 		function = "gpio_out";
 	};
 };
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0_usb>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
new file mode 100644
index 000000000000..42dab01e3f56
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -0,0 +1,939 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2023-2024 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-r-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-r-ccu.h>
+#include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
+#include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@400 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x400>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@500 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x500>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@600 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x600>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@700 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x700>;
+			enable-method = "psci";
+		};
+	};
+
+	osc24M: osc24M-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun55i-a523-mali",
+				     "arm,mali-valhall-jm";
+			reg = <0x1800000 0x10000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			power-domains = <&pck600 PD_GPU>;
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@2000000 {
+			compatible = "allwinner,sun55i-a523-pinctrl";
+			reg = <0x2000000 0x800>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/omit-if-no-ref/
+			i2s2_pi_pins: i2s2-pi-pins {
+				pins = "PI2", "PI3", "PI4", "PI5";
+				allwinner,pinmux = <5>;
+				function = "i2s2";
+				bias-disable;
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
+				allwinner,pinmux = <2>;
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0" ,"PG1", "PG2", "PG3", "PG4", "PG5";
+				allwinner,pinmux = <2>;
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1" ,"PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11", "PC13", "PC14",
+				       "PC15", "PC16";
+				allwinner,pinmux = <3>;
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				allwinner,pinmux = <5>;
+				function = "gmac0";
+				drive-strength = <40>;
+				bias-disable;
+			};
+
+			rgmii1_pins: rgmii1-pins {
+				pins = "PJ0", "PJ1", "PJ2", "PJ3", "PJ4",
+				       "PJ5", "PJ6", "PJ7", "PJ8", "PJ9",
+				       "PJ11", "PJ12", "PJ13", "PJ14", "PJ15";
+				allwinner,pinmux = <5>;
+				function = "gmac1";
+				drive-strength = <40>;
+				bias-disable;
+			};
+
+			/omit-if-no-ref/
+			spdif_out_pb_pin: spdif-pb-pin {
+				pins = "PB8";
+				function = "spdif";
+				allwinner,pinmux = <2>;
+			};
+
+			/omit-if-no-ref/
+			spdif_out_pi_pin: spdif-pi-pin {
+				pins = "PI10";
+				function = "spdif";
+				allwinner,pinmux = <2>;
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				allwinner,pinmux = <2>;
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+				allwinner,pinmux = <2>;
+			};
+
+			/omit-if-no-ref/
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+				allwinner,pinmux = <2>;
+			};
+		};
+
+		ccu: clock-controller@2001000 {
+			compatible = "allwinner,sun55i-a523-ccu";
+			reg = <0x02001000 0x1000>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>, <&rtc CLK_OSC32K_FANOUT>;
+			clock-names = "hosc", "losc",
+				      "iosc", "losc-fanout";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		wdt: watchdog@2050000 {
+			compatible = "allwinner,sun55i-a523-wdt";
+			reg = <0x2050000 0x20>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			status = "okay";
+		};
+
+		uart0: serial@2500000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500000 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 14>, <&dma 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@2500400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500400 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@2500800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500800 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@2500c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02500c00 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 17>, <&dma 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart4: serial@2501000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			dmas = <&dma 18>, <&dma 18>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart5: serial@2501400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501400 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			dmas = <&dma 19>, <&dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart6: serial@2501800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501800 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			dmas = <&dma 20>, <&dma 20>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart7: serial@2501c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x02501c00 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			dmas = <&dma 21>, <&dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@2502000 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502000 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			dmas = <&dma 43>, <&dma 43>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@2502400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502400 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			dmas = <&dma 44>, <&dma 44>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@2502800 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502800 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			dmas = <&dma 45>, <&dma 45>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@2502c00 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2502c00 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			dmas = <&dma 46>, <&dma 46>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@2503000 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2503000 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			dmas = <&dma 47>, <&dma 47>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5: i2c@2503400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x2503400 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C5>;
+			resets = <&ccu RST_BUS_I2C5>;
+			dmas = <&dma 48>, <&dma 48>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun55i-a523-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun55i-a523-dma",
+				     "allwinner,sun50i-a100-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <54>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun55i-a523-sid",
+				     "allwinner,sun50i-a64-sid";
+			reg = <0x03006000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		gic: interrupt-controller@3400000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <1>;
+			#interrupt-cells = <3>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			reg = <0x3400000 0x10000>,
+			      <0x3460000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			dma-noncoherent;
+
+			its: msi-controller@3440000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x3440000 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+				dma-noncoherent;
+			};
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun55i-a523-mmc",
+				     "allwinner,sun20i-d1-mmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@4100000 {
+			compatible = "allwinner,sun55i-a523-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x4100000 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			extcon = <&usbphy 0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: phy@4100400 {
+			compatible = "allwinner,sun55i-a523-usb-phy",
+				     "allwinner,sun20i-d1-usb-phy";
+			reg = <0x4100400 0x100>,
+			      <0x4101800 0x100>,
+			      <0x4200800 0x100>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&osc24M>,
+				 <&osc24M>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@4101000 {
+			compatible = "allwinner,sun55i-a523-ehci",
+				     "generic-ehci";
+			reg = <0x4101000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@4101400 {
+			compatible = "allwinner,sun55i-a523-ohci",
+				     "generic-ohci";
+			reg = <0x4101400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@4200000 {
+			compatible = "allwinner,sun55i-a523-ehci",
+				     "generic-ehci";
+			reg = <0x4200000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@4200400 {
+			compatible = "allwinner,sun55i-a523-ohci",
+				     "generic-ohci";
+			reg = <0x4200400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@4500000 {
+			compatible = "allwinner,sun55i-a523-gmac0",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x04500000 0x10000>;
+			clocks = <&ccu CLK_BUS_EMAC0>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC0>;
+			reset-names = "stmmaceth";
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rgmii0_pins>;
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gmac1: ethernet@4510000 {
+			compatible = "allwinner,sun55i-a523-gmac200",
+				     "snps,dwmac-4.20a";
+			reg = <0x04510000 0x10000>;
+			clocks = <&ccu CLK_BUS_EMAC1>, <&ccu CLK_MBUS_EMAC1>;
+			clock-names = "stmmaceth", "mbus";
+			resets = <&ccu RST_BUS_EMAC1>;
+			reset-names = "stmmaceth";
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rgmii1_pins>;
+			power-domains = <&pck600 PD_VO1>;
+			syscon = <&syscon>;
+			snps,fixed-burst;
+			snps,axi-config = <&gmac1_stmmac_axi_setup>;
+			snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+			snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			gmac1_mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <1>;
+
+				queue0 {};
+			};
+
+			gmac1_stmmac_axi_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <0xf>;
+				snps,rd_osr_lmt = <0xf>;
+				snps,blen = <256 128 64 32 16 8 4>;
+			};
+
+			gmac1_mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <1>;
+
+				queue0 {};
+			};
+		};
+
+		ppu: power-controller@7001400 {
+			compatible = "allwinner,sun55i-a523-ppu";
+			reg = <0x07001400 0x400>;
+			clocks = <&r_ccu CLK_BUS_R_PPU1>;
+			resets = <&r_ccu RST_BUS_R_PPU1>;
+			#power-domain-cells = <1>;
+		};
+
+		r_ccu: clock-controller@7010000 {
+			compatible = "allwinner,sun55i-a523-r-ccu";
+			reg = <0x7010000 0x250>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0_200M>,
+				 <&ccu CLK_PLL_AUDIO0_4X>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-periph",
+				      "pll-audio";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			assigned-clocks = <&r_ccu CLK_R_AHB>, <&r_ccu CLK_R_APB0>;
+			assigned-clock-rates = <200000000>, <100000000>;
+		};
+
+		nmi_intc: interrupt-controller@7010320 {
+			compatible = "allwinner,sun55i-a523-nmi";
+			reg = <0x07010320 0xc>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun55i-a523-r-pinctrl";
+			reg = <0x7022000 0x800>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB0>,
+				 <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0" ,"PL1";
+				allwinner,pinmux = <2>;
+				function = "r_i2c0";
+			};
+		};
+
+		pck600: power-controller@7060000 {
+			compatible = "allwinner,sun55i-a523-pck-600";
+			reg = <0x07060000 0x8000>;
+			clocks = <&r_ccu CLK_BUS_R_PPU0>;
+			resets = <&r_ccu RST_BUS_R_PPU0>;
+			#power-domain-cells = <1>;
+		};
+
+		r_i2c0: i2c@7081400 {
+			compatible = "allwinner,sun55i-a523-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_I2C0>;
+			dmas = <&dma 49>, <&dma 49>;
+			dma-names = "rx", "tx";
+			resets = <&r_ccu RST_BUS_R_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		rtc: rtc@7090000 {
+			compatible = "allwinner,sun55i-a523-rtc",
+				     "allwinner,sun50i-r329-rtc";
+			reg = <0x7090000 0x400>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_RTC>,
+				 <&osc24M>,
+				 <&r_ccu CLK_R_AHB>;
+			clock-names = "bus", "hosc", "ahb";
+			#clock-cells = <1>;
+		};
+
+		mcu_ccu: clock-controller@7102000 {
+			compatible = "allwinner,sun55i-a523-mcu-ccu";
+			reg = <0x7102000 0x200>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_AUDIO0_4X>,
+				 <&ccu CLK_PLL_PERIPH0_300M>,
+				 <&ccu CLK_DSP>,
+				 <&ccu CLK_MBUS>,
+				 <&r_ccu CLK_R_AHB>,
+				 <&r_ccu CLK_R_APB0>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-audio0-4x",
+				      "pll-periph0-300m",
+				      "dsp",
+				      "mbus",
+				      "r-ahb",
+				      "r-apb0";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2s0: i2s@7112000 {
+			compatible = "allwinner,sun55i-a523-i2s",
+				     "allwinner,sun50i-r329-i2s";
+			reg = <0x07112000 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_I2S0>, <&mcu_ccu CLK_MCU_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&mcu_ccu RST_BUS_MCU_I2S0>;
+			dmas = <&mcu_dma 3>, <&mcu_dma 3>;
+			dma-names = "rx", "tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@7113000 {
+			compatible = "allwinner,sun55i-a523-i2s",
+				     "allwinner,sun50i-r329-i2s";
+			reg = <0x07113000 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_I2S1>, <&mcu_ccu CLK_MCU_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&mcu_ccu RST_BUS_MCU_I2S1>;
+			dmas = <&mcu_dma 4>, <&mcu_dma 4>;
+			dma-names = "rx", "tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@7114000 {
+			compatible = "allwinner,sun55i-a523-i2s",
+				     "allwinner,sun50i-r329-i2s";
+			reg = <0x07114000 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_I2S2>, <&mcu_ccu CLK_MCU_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&mcu_ccu RST_BUS_MCU_I2S2>;
+			dmas = <&mcu_dma 5>, <&mcu_dma 5>;
+			dma-names = "rx", "tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		i2s3: i2s@7115000 {
+			compatible = "allwinner,sun55i-a523-i2s",
+				     "allwinner,sun50i-r329-i2s";
+			reg = <0x07115000 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_I2S3>, <&mcu_ccu CLK_MCU_I2S3>;
+			clock-names = "apb", "mod";
+			resets = <&mcu_ccu RST_BUS_MCU_I2S3>;
+			dmas = <&mcu_dma 6>, <&mcu_dma 6>;
+			dma-names = "rx", "tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		spdif: spdif@7116000 {
+			compatible = "allwinner,sun55i-a523-spdif";
+			reg = <0x07116000 0x400>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_SPDIF>,
+				 <&mcu_ccu CLK_MCU_SPDIF_TX>,
+				 <&mcu_ccu CLK_MCU_SPDIF_RX>;
+			clock-names = "apb", "tx", "rx";
+			resets = <&mcu_ccu RST_BUS_MCU_SPDIF>;
+			dmas = <&mcu_dma 2>, <&mcu_dma 2>;
+			dma-names = "rx", "tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		mcu_dma: dma-controller@7121000 {
+			compatible = "allwinner,sun55i-a523-mcu-dma",
+				     "allwinner,sun50i-a100-dma";
+			reg = <0x07121000 0x1000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_DMA>, <&mcu_ccu CLK_MCU_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <15>;
+			resets = <&mcu_ccu RST_BUS_MCU_DMA>;
+			#dma-cells = <1>;
+		};
+
+		npu: npu@7122000 {
+			compatible = "vivante,gc";
+			reg = <0x07122000 0x1000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_NPU_ACLK>,
+				 <&ccu CLK_NPU>,
+				 <&mcu_ccu CLK_BUS_MCU_NPU_HCLK>;
+			clock-names = "bus", "core", "reg";
+			resets = <&mcu_ccu RST_BUS_MCU_NPU>;
+			power-domains = <&ppu PD_NPU>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
new file mode 100644
index 000000000000..bfdf1728cd14
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2025 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Radxa Cubie A5E";
+	compatible = "radxa,cubie-a5e", "allwinner,sun55i-a527";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		use-led {
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>; /* pmic_temp */
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the USB-C connector */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>;	/* PL8 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii0_phy>;
+	phy-supply = <&reg_cldo3>;
+
+	allwinner,tx-delay-ps = <300>;
+	allwinner,rx-delay-ps = <400>;
+
+	status = "okay";
+};
+
+&gmac1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii1_phy>;
+	phy-supply = <&reg_cldo4>;
+
+	tx-internal-delay-ps = <300>;
+	rx-internal-delay-ps = <400>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii0_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mdio1 {
+	ext_rgmii1_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 9 16 GPIO_ACTIVE_LOW>; /* PJ16 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_aldo2>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_cldo3>;
+	vcc-pj-supply = <&reg_cldo4>;
+	vcc-pk-supply = <&reg_cldo1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* charger mode design but has no battery terminal */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-usb";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-iowifi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pm-lpddr4";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-mipi-cam";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc-and-their-dog";
+			};
+
+			reg_cldo2: cldo2 {
+				/* not connected */
+			};
+
+			reg_cldo3: cldo3 {
+				/* IO, USB-2, 3V3, card, NAND, sensor, PI */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spi-ana";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pj-phy";
+				/* enough time for the PHY to fully power on */
+				regulator-enable-ramp-delay = <150000>;
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-mipi-dsi";
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* RISC-V management core supply */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The USB-C port is the primary power supply, so in this configuration
+	 * relies on the other end of the USB cable to supply the VBUS power.
+	 * So use this port in peripheral mode.
+	 * It is possible to supply the board with the 5V pins on the GPIO
+	 * header, and since the DCIN_5V line is hardwired to the USB-C VBUS
+	 * pins, the port turns into a host port, unconditionally supplying
+	 * power. The dr_mode property should be changed to "host" here, if
+	 * users choose this setup.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/*
+ * The schematic describes USB0_ID (PL10), measuring VBUS_5V, which looks to
+ * be always on. Also there is USB-VBUSDET (PL2), which is measuring the same
+ * VBUS_5V. There is also DCIN_DET, which measures DCIN_5V, so the power
+ * input rail.
+ * None of them seem to make any sense in relation to detecting USB devices
+ * or whether there is power provided via any USB pins: they would always
+ * report high, otherwise the system wouldn't be running.
+ * The AXP717C provides proper USB-C CC pin functionality, but the PMIC is
+ * not connected to those pins of the USB-C connector.
+ */
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb1_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
new file mode 100644
index 000000000000..a96927fbdadd
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "X96Q Pro+";
+	compatible = "amediatech,x96q-pro-plus", "allwinner,sun55i-h728";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the barrel plug */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* 3.3V dummy supply for the SD card */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_dcdc4>;
+	vcc-pe-supply = <&reg_dcdc4>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_dcdc4>;
+	vcc-pj-supply = <&reg_dcdc4>;
+	vcc-pk-supply = <&reg_bldo3>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@34 {
+		compatible = "x-powers,axp717";
+		reg = <0x34>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies the "little" cluster (1.0(?) GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd-dcdc4";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				/* not connected */
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-aldo3";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi-lvds";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dram-1v8";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc-bldo3";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-codec-sd";
+			};
+
+			reg_cldo2: cldo2 {
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-codec-eth-sd";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-phy";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				/* not connected */
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-name = "vdd-dcdc3";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/* USB0 is a USB-A receptacle, always powered, so force host mode. */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
new file mode 100644
index 000000000000..054d0357c139
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (C) 2024 Arm Ltd.
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Avaota A1";
+	compatible = "yuzukihd,avaota-a1", "allwinner,sun55i-t527";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>; /* pmic_temp */
+	};
+
+	reg_vcc12v: vcc12v {
+		/* DC input jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply from the 12V->5V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc12v>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&pio 8 12 GPIO_ACTIVE_HIGH>;	/* PI12 */
+		enable-active-high;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii0_phy>;
+	phy-supply = <&reg_dcdc4>;
+
+	allwinner,tx-delay-ps = <100>;
+	allwinner,rx-delay-ps = <300>;
+
+	status = "okay";
+};
+
+&gmac1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii1_phy>;
+	phy-supply = <&reg_dcdc4>;
+
+	tx-internal-delay-ps = <100>;
+	rx-internal-delay-ps = <100>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii0_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mdio1 {
+	ext_rgmii1_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		reset-gpios = <&pio 9 16 GPIO_ACTIVE_LOW>; /* PJ16 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_dcdc4>;
+	vcc-pe-supply = <&reg_dcdc4>;
+	vcc-pf-supply = <&reg_cldo3>;	/* actually switchable */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_dcdc4>;
+	vcc-pj-supply = <&reg_dcdc4>;
+	vcc-pk-supply = <&reg_bldo3>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@35 {
+		compatible = "x-powers,axp717";
+		reg = <0x35>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* no battery; output used for dcdc4 instead */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1160000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd-io";
+			};
+
+			reg_aldo1: aldo1 {
+				/* not connected */
+			};
+
+			reg_aldo2: aldo2 {
+				/* not connected */
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-pm";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi-lvds";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dram-1v8";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-cvp-pk-vid1v8";
+			};
+
+			reg_bldo4: bldo4 {
+				/* not connected */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pc";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spi-ana";
+			};
+
+			reg_cldo4: cldo4 {
+				/* not connected */
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			/* 12V-5V buck converter can supply up to 5A */
+			input-current-limit-microamp = <3250000>;
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			aldo1 {
+				/* not connected */
+			};
+
+			dldo1 {
+				/* not connected */
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* Some RISC-V management core related voltage */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_aldo3>;
+};
+
+&rtc {
+	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+	assigned-clocks = <&rtc CLK_OSC32K>;
+	assigned-clock-rates = <32768>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	 /*
+	  * The CC pins of the USB-C port have two pull-down resistors
+	  * connected to GND, which fixes this port to a peripheral role.
+	  * There is a regulator, controlled by a GPIO, to provide VBUS power
+	  * to the port, and a VBUSDET GPIO, to detect externally provided
+	  * power, but without the CC pins there is no real way to do a
+	  * runtime role detection.
+	  */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb_vbus>;
+	usb0_vbus_det-gpios = <&pio 8 13 GPIO_ACTIVE_HIGH>; /* PI13 */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
new file mode 100644
index 000000000000..9e6b21cf293e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi 4A";
+	compatible = "xunlong,orangepi-4a", "allwinner,sun55i-t527";
+
+	aliases {
+		ethernet0 = &gmac1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext-osc32k-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* PWM capable pin, but PWM isn't supported yet. */
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>, /* pmic_temp */
+			      <&axp717_adc 7>; /* bkup_batt_v */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 4 GPIO_ACTIVE_HIGH>;	/* PL4 */
+		enable-active-high;
+	};
+
+	reg_pcie_vcc3v3: regulator-pcie-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-pcie-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>;	/* PL8 */
+		enable-active-high;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		gpio = <&r_pio 0 12 GPIO_ACTIVE_HIGH>;	/* PL12 */
+		enable-active-high;
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board wide 5V supply from USB type-C port */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_cldo4>;
+
+	tx-internal-delay-ps = <0>;
+	rx-internal-delay-ps = <300>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+&mdio1 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		interrupts-extended = <&pio 8 16 IRQ_TYPE_LEVEL_LOW>; /* PI16 */
+		reset-gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo3>;
+	cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_dldo1_323>;
+	vqmmc-supply = <&reg_bldo1>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pc-supply = <&reg_cldo1>;
+	vcc-pd-supply = <&reg_cldo3>;
+	vcc-pe-supply = <&reg_aldo2>;
+	vcc-pf-supply = <&reg_cldo3>;	/* VCC-IO for 3.3v; VCC-MCSI for 1.8v */
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_cldo3>;	/* via VCC-IO */
+	vcc-pi-supply = <&reg_cldo3>;
+	vcc-pj-supply = <&reg_cldo1>;
+	vcc-pk-supply = <&reg_cldo1>;
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp717: pmic@35 {
+		compatible = "x-powers,axp717";
+		reg = <0x35>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupts-extended = <&nmi_intc 0 IRQ_TYPE_LEVEL_LOW>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin4-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* no battery; output used for dcdc4 instead */
+			status = "disabled";
+		};
+
+		regulators {
+			/* Supplies the "little" cluster (1.4 GHz cores) */
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-cpul";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <920000>;
+				regulator-max-microvolt = <920000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1160000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dcdc4: dcdc4 {
+				/* feeds 3.3V pin on GPIO header */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd-io";
+			};
+
+			aldo1 {
+				/* not actually connected */
+				regulator-name = "avdd-csi";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_aldo3: aldo3 {
+				/* supplies the I2C pins for this PMIC */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-usb";
+			};
+
+			reg_aldo4: aldo4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pll-dxco-avcc";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pg-wifi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pm-lpddr";
+			};
+
+			bldo3 {
+				/* not actually connected */
+				regulator-name = "afvcc-csi";
+			};
+
+			bldo4 {
+				/* not actually connected */
+				regulator-name = "dvdd-csi";
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-cvp-pc-lvds-mcsi-pk-efuse-pcie-edp-1v8";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-csi";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-nand-pd-pi-usb";
+			};
+
+			reg_cldo4: cldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-phy1-lcd";
+			};
+
+			reg_cpusldo: cpusldo {
+				/* supplies the management core */
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-cpus-usb-0v9";
+			};
+		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			input-current-limit-microamp = <3000000>;
+		};
+	};
+
+	axp323: pmic@36 {
+		compatible = "x-powers,axp323";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		status = "okay";
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1_323: aldo1 {
+				/* less capable and shares load with dldo1 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo1_323: dldo1 {
+				/* more capable and shares load with aldo1 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi2";
+			};
+
+			/* Supplies the "big" cluster (1.8 GHz cores) */
+			reg_dcdc1_323: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			/* DCDC2 is polyphased with DCDC1 */
+
+			/* Some RISC-V management core related voltage */
+			reg_dcdc3_323: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd-dnr";
+			};
+		};
+	};
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ *	vcc-pl-supply = <&reg_aldo3>;
+ */
+	vcc-pm-supply = <&reg_bldo2>;
+};
+
+&rtc {
+	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+	assigned-clocks = <&rtc CLK_OSC32K>;
+	assigned-clock-rates = <32768>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_aldo1_323>;
+		vddio-supply = <&reg_bldo1>;
+		device-wakeup-gpios = <&r_pio 1 3 GPIO_ACTIVE_HIGH>; /* PM3 */
+		host-wakeup-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		shutdown-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+	};
+};
+
+&usb_otg {
+	/*
+	 * The OTG controller is connected to one of the type-A ports.
+	 * There is a regulator, controlled by a GPIO, to provide VBUS power
+	 * to the port, and a VBUSDET GPIO, to detect externally provided
+	 * power. But without ID or CC pins there is no real way to do a
+	 * runtime role detection.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_otg_vbus>;
+	usb0_vbus_det-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	usb1_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 0def0b0daaf7..657e986e5dba 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -130,16 +130,19 @@
 		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <150000000>;
 		};
 
 		cb_intosc_ls_clk: cb-intosc-ls-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <300000000>;
 		};
 
 		f2s_free_clk: f2s-free-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			status = "disabled";
 		};
 
 		osc1: osc1 {
@@ -395,7 +398,7 @@
 
 		rst: rstmgr@ffd11000 {
 			#reset-cells = <1>;
-			compatible = "altr,stratix10-rst-mgr";
+			compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
 			reg = <0xffd11000 0x1000>;
 		};
 
@@ -627,6 +630,15 @@
 				interrupts = <5 4>;
 			};
 
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+
 		};
 
 		qspi: spi@ff8d2000 {
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 4eee777ef1a1..58f776e411fc 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -50,19 +50,6 @@
 		regulator-min-microvolt = <330000>;
 		regulator-max-microvolt = <330000>;
 	};
-
-	soc@0 {
-		eccmgr {
-			sdmmca-ecc@ff8c8c00 {
-				compatible = "altr,socfpga-s10-sdmmc-ecc",
-					     "altr,socfpga-sdmmc-ecc";
-				reg = <0xff8c8c00 0x100>;
-				altr,ecc-parent = <&mmc>;
-				interrupts = <14 4>,
-					     <15 4>;
-			};
-		};
-	};
 };
 
 &pinctrl0 {
@@ -190,6 +177,8 @@
 		cdns,tsd2d-ns = <50>;
 		cdns,tchsh-ns = <4>;
 		cdns,tslch-ns = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index 7c53cb9621e5..92954c5beb54 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -50,19 +50,6 @@
 		regulator-min-microvolt = <330000>;
 		regulator-max-microvolt = <330000>;
 	};
-
-	soc@0 {
-		eccmgr {
-			sdmmca-ecc@ff8c8c00 {
-				compatible = "altr,socfpga-s10-sdmmc-ecc",
-					     "altr,socfpga-sdmmc-ecc";
-				reg = <0xff8c8c00 0x100>;
-				altr,ecc-parent = <&mmc>;
-				interrupts = <14 4>,
-					     <15 4>;
-			};
-		};
-	};
 };
 
 &gpio1 {
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
index 0d837d3e65a5..5ba6ca4ef19a 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
@@ -62,20 +62,16 @@
 &gmac0 {
 	status = "okay";
 	phy-mode = "rgmii";
-	phy-addr = <0xffffffff>;
-	snps,max-mtu = <0x0>;
 };
 
 &gmac1 {
 	status = "okay";
 	phy-mode = "rgmii";
-	phy-addr = <0xffffffff>;
 };
 
 &gmac2 {
 	status = "okay";
 	phy-mode = "rgmii";
-	phy-addr = <0xffffffff>;
 };
 
 &mmc {
@@ -104,12 +100,6 @@
 	status = "okay";
 };
 
-&rst {
-	altr,modrst-offset = <0x20>;
-};
-
 &sysmgr {
 	reg = <0xffd12000 0x1000>;
-	interrupts = <0x0 0x10 0x4>;
-	cpu1-start-addr = <0xffd06230>;
 };
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index da9de4986660..f49209fddbbb 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -123,6 +123,7 @@
 			      <0x0 0xf0120000 0x0 0x2000>;	/* GICH */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 		};
 
@@ -151,7 +152,7 @@
 			al,msi-num-spis = <160>;
 		};
 
-		io-fabric@fc000000 {
+		io-bus@fc000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index 8b6156b5af65..bd35e0e9d0ab 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -320,6 +320,7 @@
 
 		gic: interrupt-controller@f0800000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0xf0800000 0 0x10000>,	/* GICD */
@@ -361,7 +362,7 @@
 			interrupt-parent = <&gic>;
 		};
 
-		io-fabric@fc000000 {
+		io-bus@fc000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
index 7c82d90e940d..8862adae44e9 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -58,7 +58,7 @@
 
 &spi1 {
 	status = "okay";
-	sdcard0: sdcard@0 {
+	sdcard0: mmc@0 {
 		compatible = "mmc-spi-slot";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
index 58e2b0a6f841..b34dd8d5d1b1 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -8,32 +8,10 @@
 
 /dts-v1/;
 
-/include/ "amd-seattle-soc.dtsi"
-/include/ "amd-seattle-cpus.dtsi"
+/include/ "amd-overdrive-rev-b0.dts"
 
 / {
 	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
-	compatible = "amd,seattle-overdrive", "amd,seattle";
-
-	chosen {
-		stdout-path = &serial0;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-};
-
-&ccp0 {
-	status = "okay";
-};
-
-/**
- * NOTE: In Rev.B, gpio0 is reserved.
- */
-&gpio1 {
-	status = "okay";
 };
 
 &gpio2 {
@@ -44,48 +22,11 @@
 	status = "okay";
 };
 
-&gpio4 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
 &sata1 {
 	status = "okay";
 };
 
-&spi0 {
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-	sdcard0: sdcard@0 {
-		compatible = "mmc-spi-slot";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		voltage-ranges = <3200 3400>;
-		pl022,interface = <0>;
-		pl022,com-mode = <0x0>;
-		pl022,rx-level-trig = <0>;
-		pl022,tx-level-trig = <0>;
-	};
-};
-
 &ipmi_kcs {
 	status = "okay";
 };
 
-&smb0 {
-	/include/ "amd-seattle-xgbe-b.dtsi"
-};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
index 2dd2c28171ee..73f687773ce6 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
@@ -5,51 +5,39 @@
  * Copyright (C) 2014 Advanced Micro Devices, Inc.
  */
 
-	adl3clk_100mhz: clk100mhz_0 {
+	adl3clk_100mhz: uartspiclk_100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "adl3clk_100mhz";
 	};
 
-	ccpclk_375mhz: clk375mhz {
+	ccpclk_375mhz: clock-375000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <375000000>;
 		clock-output-names = "ccpclk_375mhz";
 	};
 
-	sataclk_333mhz: clk333mhz {
+	sataclk_333mhz: clock-333000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <333000000>;
 		clock-output-names = "sataclk_333mhz";
 	};
 
-	pcieclk_500mhz: clk500mhz_0 {
+	dmaclk_500mhz: pcieclk_500mhz: clock-500000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <500000000>;
 		clock-output-names = "pcieclk_500mhz";
 	};
 
-	dmaclk_500mhz: clk500mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <500000000>;
-		clock-output-names = "dmaclk_500mhz";
-	};
-
-	miscclk_250mhz: clk250mhz_4 {
+	xgmacclk0_dma_250mhz: xgmacclk0_ptp_250mhz: xgmacclk1_dma_250mhz: xgmacclk1_ptp_250mhz:
+	miscclk_250mhz: clock-250000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <250000000>;
 		clock-output-names = "miscclk_250mhz";
 	};
 
-	uartspiclk_100mhz: clk100mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-output-names = "uartspiclk_100mhz";
-	};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index d3d931eb7677..a611f8288b3e 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -11,6 +11,8 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	/include/ "amd-seattle-clks.dtsi"
+
 	gic0: interrupt-controller@e1101000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		interrupt-controller;
@@ -38,7 +40,7 @@
 			     <1 10 0xff04>;
 	};
 
-	smb0: smb {
+	smb0: bus {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -51,8 +53,6 @@
 		 */
 		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
-		/include/ "amd-seattle-clks.dtsi"
-
 		sata0: sata@e0300000 {
 			compatible = "snps,dwc-ahci";
 			reg = <0 0xe0300000 0 0xf0000>;
@@ -121,7 +121,6 @@
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1020000 0 0x1000>;
-			spi-controller;
 			interrupts = <0 330 4>;
 			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
 			clock-names = "sspclk", "apb_pclk";
@@ -131,7 +130,6 @@
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1030000 0 0x1000>;
-			spi-controller;
 			interrupts = <0 329 4>;
 			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
 			clock-names = "sspclk", "apb_pclk";
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
index 9259e547e2e8..18b0c2dd1b2d 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -5,35 +5,7 @@
  * Copyright (C) 2015 Advanced Micro Devices, Inc.
  */
 
-	xgmacclk0_dma_250mhz: clk250mhz_0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk0_dma_250mhz";
-	};
-
-	xgmacclk0_ptp_250mhz: clk250mhz_1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk0_ptp_250mhz";
-	};
-
-	xgmacclk1_dma_250mhz: clk250mhz_2 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk1_dma_250mhz";
-	};
-
-	xgmacclk1_ptp_250mhz: clk250mhz_3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-		clock-output-names = "xgmacclk1_ptp_250mhz";
-	};
-
-	xgmac0: xgmac@e0700000 {
+	xgmac0: ethernet@e0700000 {
 		compatible = "amd,xgbe-seattle-v1a";
 		reg = <0 0xe0700000 0 0x80000>,
 		      <0 0xe0780000 0 0x80000>,
@@ -59,7 +31,7 @@
 		dma-coherent;
 	};
 
-	xgmac1: xgmac@e0900000 {
+	xgmac1: ethernet@e0900000 {
 		compatible = "amd,xgbe-seattle-v1a";
 		reg = <0 0xe0900000 0 0x80000>,
 		      <0 0xe0980000 0 0x80000>,
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 2fbda8419c65..219fb088c704 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -3,6 +3,9 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7-s805x3-bp201.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-s7d-s905x5m-bm202.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
@@ -49,6 +52,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805y-xiaomi-aquaman.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
@@ -76,6 +80,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-tx9-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-ugoos-am3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h
new file mode 100644
index 000000000000..f6a4c90bab3c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-reset.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_A4_RESET_H
+#define __DTS_AMLOGIC_A4_RESET_H
+
+/* RESET0 */
+/*						0-3 */
+#define RESET_USB				4
+/*						5-6*/
+#define RESET_U2PHY22				7
+#define RESET_USBPHY20				8
+#define RESET_U2PHY21				9
+#define RESET_USB2DRD				10
+#define RESET_U2H				11
+#define RESET_LED_CTRL				12
+/*						13-31 */
+
+/* RESET1 */
+#define RESET_AUDIO				32
+#define RESET_AUDIO_VAD				33
+/*						34*/
+#define RESET_DDR_APB				35
+#define RESET_DDR				36
+#define RESET_VOUT_VENC				37
+#define RESET_VOUT				38
+/*						39-47 */
+#define RESET_ETHERNET				48
+/*						49-63 */
+
+/* RESET2 */
+#define RESET_DEVICE_MMC_ARB			64
+#define RESET_IRCTRL				65
+/*						66*/
+#define RESET_TS_PLL				67
+/*						68-72*/
+#define RESET_SPICC_0				73
+#define RESET_SPICC_1				74
+/*						75-79*/
+#define RESET_MSR_CLK				80
+/*						81*/
+#define RESET_SAR_ADC				82
+/*						83-87*/
+#define RESET_ACODEC				88
+/*						89-90*/
+#define RESET_WATCHDOG				91
+/*						92-95*/
+
+/* RESET3 */
+/*						96-127 */
+
+/* RESET4 */
+/*						128-131 */
+#define RESET_PWM_AB				132
+#define RESET_PWM_CD				133
+#define RESET_PWM_EF				134
+#define RESET_PWM_GH				135
+/*						136-137*/
+#define RESET_UART_A				138
+#define RESET_UART_B				139
+/*						140*/
+#define RESET_UART_D				141
+#define RESET_UART_E				142
+/*						143-144*/
+#define RESET_I2C_M_A				145
+#define RESET_I2C_M_B				146
+#define RESET_I2C_M_C				147
+#define RESET_I2C_M_D				148
+/*						149-151*/
+#define RESET_SDEMMC_A				152
+/*						153*/
+#define RESET_SDEMMC_C				154
+/*						155-159*/
+
+/* RESET5 */
+/*						160-175*/
+#define RESET_BRG_AO_NIC_SYS			176
+/*						177*/
+#define RESET_BRG_AO_NIC_MAIN			178
+#define RESET_BRG_AO_NIC_AUDIO			179
+/*						180-183*/
+#define RESET_BRG_AO_NIC_ALL			184
+/*						185*/
+#define RESET_BRG_NIC_SDIO			186
+#define RESET_BRG_NIC_EMMC			187
+#define RESET_BRG_NIC_DSU			188
+#define RESET_BRG_NIC_CLK81			189
+#define RESET_BRG_NIC_MAIN			190
+#define RESET_BRG_NIC_ALL			191
+
+#endif
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index de10e7aebf21..fce45933fa28 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -4,7 +4,9 @@
  */
 
 #include "amlogic-a4-common.dtsi"
+#include "amlogic-a4-reset.h"
 #include <dt-bindings/power/amlogic,a4-pwrc.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
 / {
 	cpus {
 		#address-cells = <2>;
@@ -15,6 +17,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -22,6 +31,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -29,6 +45,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -36,6 +59,22 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -48,3 +87,155 @@
 		};
 	};
 };
+
+&apb {
+	reset: reset-controller@2000 {
+		compatible = "amlogic,a4-reset",
+			     "amlogic,meson-s4-reset";
+		reg = <0x0 0x2000 0x0 0x98>;
+		#reset-cells = <1>;
+	};
+
+	periphs_pinctrl: pinctrl@4000 {
+		compatible = "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x4000 0x0 0x280>;
+
+		gpiox: gpio@100 {
+			reg = <0 0x100 0 0x40>, <0 0xc 0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 18>;
+		};
+
+		gpiot: gpio@140 {
+			reg = <0 0x140 0 0x40>, <0 0x2c 0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 23>;
+		};
+
+		gpiod: gpio@180 {
+			reg = <0 0x180 0 0x40>, <0 0x40 0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
+		};
+
+		gpioe: gpio@1c0 {
+			reg = <0 0x1c0 0 0x40>, <0 0x48 0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+		};
+
+		gpiob: gpio@240 {
+			reg = <0 0x240 0 0x40>, <0 0 0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+		};
+
+		func-uart-a {
+			uart_a_default: group-uart-a-pins1 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_X, 11, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 12, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 13, 1)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_X, 14, 1)>;
+			};
+
+			group-uart-a-pins2 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_D, 2, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_D, 3, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-b {
+			uart_b_default: group-uart-b-pins {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_E, 0, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_E, 1, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-d {
+			uart_d_default: group-uart-d-pins1 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 18, 4)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 19, 4)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+
+			group-uart-d-pins2 {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 7, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 8, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 9, 2)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 10, 2)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+
+		func-uart-e {
+			uart_e_default: group-uart-e-pins {
+				pinmux = <AML_PINMUX(AMLOGIC_GPIO_T, 14, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 15, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 16, 3)>,
+					 <AML_PINMUX(AMLOGIC_GPIO_T, 17, 3)>;
+				bias-pull-up;
+				drive-strength-microamp = <4000>;
+			};
+		};
+	};
+
+	gpio_intc: interrupt-controller@4080 {
+		compatible = "amlogic,a4-gpio-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x4080 0x0 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts =
+			<10 11 12 13 14 15 16 17 18 19 20 21>;
+	};
+
+	ao_pinctrl: pinctrl@8e700 {
+		compatible = "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x8e700 0x0 0x80>;
+
+		gpioao: gpio@4 {
+			reg = <0 0x4 0 0x16>, <0 0 0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
+		};
+
+		test_n: gpio@44 {
+			reg = <0 0x44 0 0x20>;
+			reg-names = "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+		};
+	};
+
+	gpio_ao_intc: interrupt-controller@8e72c {
+		compatible = "amlogic,a4-gpio-ao-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x8e72c 0x0 0x0c>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts = <140 141>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h b/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h
new file mode 100644
index 000000000000..cdf0f5159620
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5-reset.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __DTS_AMLOGIC_A5_RESET_H
+#define __DTS_AMLOGIC_A5_RESET_H
+
+/* RESET0 */
+/*						0-3 */
+#define RESET_USB				4
+/*						5-7 */
+#define RESET_USBPHY20				8
+/*						9 */
+#define RESET_USB2DRD				10
+/*						11-31 */
+
+/* RESET1 */
+#define RESET_AUDIO				32
+#define RESET_AUDIO_VAD				33
+/*                                              34 */
+#define RESET_DDR_APB				35
+#define RESET_DDR				36
+/*						37-40 */
+#define RESET_DSPA_DEBUG			41
+/*                                              42 */
+#define RESET_DSPA				43
+/*						44-46 */
+#define RESET_NNA				47
+#define RESET_ETHERNET				48
+/*						49-63 */
+
+/* RESET2 */
+#define RESET_ABUS_ARB				64
+#define RESET_IRCTRL				65
+/*						66 */
+#define RESET_TS_PLL				67
+/*						68-72 */
+#define RESET_SPICC_0				73
+#define RESET_SPICC_1				74
+#define RESET_RSA				75
+
+/*						76-79 */
+#define RESET_MSR_CLK				80
+#define RESET_SPIFC				81
+#define RESET_SAR_ADC				82
+/*						83-90 */
+#define RESET_WATCHDOG				91
+/*						92-95 */
+
+/* RESET3 */
+/*						96-127 */
+
+/* RESET4 */
+#define RESET_RTC				128
+/*						129-131 */
+#define RESET_PWM_AB				132
+#define RESET_PWM_CD				133
+#define RESET_PWM_EF				134
+#define RESET_PWM_GH				135
+/*						104-105 */
+#define RESET_UART_A				138
+#define RESET_UART_B				139
+#define RESET_UART_C				140
+#define RESET_UART_D				141
+#define RESET_UART_E				142
+/*						143*/
+#define RESET_I2C_S_A				144
+#define RESET_I2C_M_A				145
+#define RESET_I2C_M_B				146
+#define RESET_I2C_M_C				147
+#define RESET_I2C_M_D				148
+/*						149-151 */
+#define RESET_SDEMMC_A				152
+/*						153 */
+#define RESET_SDEMMC_C				154
+/*						155-159*/
+
+/* RESET5 */
+/*						160-175 */
+#define RESET_BRG_AO_NIC_SYS			176
+#define RESET_BRG_AO_NIC_DSPA			177
+#define RESET_BRG_AO_NIC_MAIN			178
+#define RESET_BRG_AO_NIC_AUDIO			179
+/*						180-183 */
+#define RESET_BRG_AO_NIC_ALL			184
+#define RESET_BRG_NIC_NNA			185
+#define RESET_BRG_NIC_SDIO			186
+#define RESET_BRG_NIC_EMMC			187
+#define RESET_BRG_NIC_DSU			188
+#define RESET_BRG_NIC_SYSCLK			189
+#define RESET_BRG_NIC_MAIN			190
+#define RESET_BRG_NIC_ALL			191
+
+#endif
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
index 17a6316de891..2b12d8284594 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
@@ -4,6 +4,8 @@
  */
 
 #include "amlogic-a4-common.dtsi"
+#include "amlogic-a5-reset.h"
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
 #include <dt-bindings/power/amlogic,a5-pwrc.h>
 / {
 	cpus {
@@ -48,3 +50,111 @@
 		};
 	};
 };
+
+&apb {
+	reset: reset-controller@2000 {
+		compatible = "amlogic,a5-reset",
+			     "amlogic,meson-s4-reset";
+		reg = <0x0 0x2000 0x0 0x98>;
+		#reset-cells = <1>;
+	};
+
+	periphs_pinctrl: pinctrl@4000 {
+		compatible = "amlogic,pinctrl-a5",
+			     "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x4000 0x0 0x300>;
+
+		gpioz: gpio@c0 {
+			reg = <0x0 0xc0 0x0 0x40>,
+			      <0x0 0x18 0x0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>;
+		};
+
+		gpiox: gpio@100 {
+			reg = <0x0 0x100 0x0 0x40>,
+			      <0x0 0xc   0x0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+		};
+
+		gpiot: gpio@140 {
+			reg = <0x0 0x140 0x0 0x40>,
+			      <0x0 0x2c  0x0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 14>;
+		};
+
+		gpiod: gpio@180 {
+			reg = <0x0 0x180 0x0 0x40>,
+			      <0x0 0x40  0x0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
+		};
+
+		gpioe: gpio@1c0 {
+			reg = <0x0 0x1c0 0x0 0x40>,
+			      <0x0 0x48  0x0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+		};
+
+		gpioc: gpio@200 {
+			reg = <0x0 0x200 0x0 0x40>,
+			      <0x0 0x24  0x0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 11>;
+		};
+
+		gpiob: gpio@240 {
+			reg = <0x0 0x240 0x0 0x40>,
+			      <0x0 0x0   0x0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+		};
+
+		gpioh: gpio@280 {
+			reg = <0x0 0x280 0x0 0x40>,
+			      <0x0 0x4c  0x0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 5>;
+		};
+
+		gpio_test_n: gpio@2c0 {
+			reg = <0x0 0x2c0 0x0 0x40>,
+			      <0x0 0x3c  0x0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+		};
+	};
+
+	gpio_intc: interrupt-controller@4080 {
+		compatible = "amlogic,a5-gpio-intc",
+			     "amlogic,meson-gpio-intc";
+		reg = <0x0 0x4080 0x0 0x20>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		amlogic,channel-interrupts =
+			<10 11 12 13 14 15 16 17 18 19 20 21>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
index 45f8631f9feb..e026604c55e6 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
@@ -17,6 +17,7 @@
 	aliases {
 		serial0 = &uart_b;
 		spi0 = &spifc;
+		i2c2 = &i2c2;
 	};
 
 	memory@0 {
@@ -146,6 +147,36 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	camera_vdddo_1v8: regulator-camera-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDDO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	camera_vdda_2v9: regulator-camera-2v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDA";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		vin-supply = <&vcc_5v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	camera_vddd_1v2: regulator-camera-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDD";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &uart_b {
@@ -258,3 +289,56 @@
 	vmmc-supply = <&sdcard>;
 	vqmmc-supply = <&sdcard>;
 };
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins1>;
+	clock-frequency = <100000>; /* default 100k */
+
+	imx290: sensor0@1a {
+		compatible = "sony,imx290";
+		reg = <0x1a>;
+		clocks = <&clkc_pll CLKID_MCLK0>;
+		clock-names = "xclk";
+		clock-frequency = <37125000>;
+		assigned-clocks = <&clkc_pll CLKID_MCLK_PLL>,
+				  <&clkc_pll CLKID_MCLK0>;
+		assigned-clock-rates = <74250000>, <37125000>;
+
+		vdddo-supply = <&camera_vdddo_1v8>;
+		vdda-supply = <&camera_vdda_2v9>;
+		vddd-supply = <&camera_vddd_1v2>;
+
+		reset-gpios = <&gpio GPIOE_4 GPIO_ACTIVE_LOW>;
+
+		port {
+			imx290_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				link-frequencies = /bits/ 64 <222750000 148500000>;
+				remote-endpoint = <&c3_mipi_csi_in>;
+			};
+		};
+	};
+};
+
+&csi2 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			c3_mipi_csi_in: endpoint {
+				remote-endpoint = <&imx290_out>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&adap {
+	status = "okay";
+};
+
+&isp {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index fd0e557eba06..13b7ac03f9b2 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -23,6 +23,13 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -30,6 +37,22 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x7d000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -53,6 +76,13 @@
 		#clock-cells = <0>;
 	};
 
+	xtal_32k: xtal-clk-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k";
+		#clock-cells = <0>;
+	};
+
 	sm: secure-monitor {
 		compatible = "amlogic,meson-gxbb-sm";
 
@@ -760,6 +790,11 @@
 				};
 			};
 
+			clk_msr: clock-measure@48000 {
+				compatible = "amlogic,c3-clk-measure";
+				reg = <0x0 0x48000 0x0 0x1c>;
+			};
+
 			spicc0: spi@50000 {
 				compatible = "amlogic,meson-g12a-spicc";
 				reg = <0x0 0x50000 0x0 0x44>;
@@ -787,7 +822,7 @@
 			pwm_mn: pwm@54000 {
 				compatible = "amlogic,c3-pwm",
 					     "amlogic,meson-s4-pwm";
-				reg = <0x0 54000 0x0 0x24>;
+				reg = <0x0 0x54000 0x0 0x24>;
 				clocks = <&clkc_periphs CLKID_PWM_M>,
 					 <&clkc_periphs CLKID_PWM_N>;
 				#pwm-cells = <3>;
@@ -962,6 +997,15 @@
 				clock-names = "core", "device";
 				status = "disabled";
 			};
+
+			rtc@9a000 {
+				compatible = "amlogic,c3-rtc",
+					     "amlogic,a5-rtc";
+				reg = <0x0 0x9a000 0x0 0x38>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal_32k>, <&clkc_periphs CLKID_SYS_RTC>;
+				clock-names = "osc", "sys";
+			};
 		};
 
 		ethmac: ethernet@fdc00000 {
@@ -987,5 +1031,93 @@
 				#size-cells = <0>;
 			};
 		};
+
+		csi2: csi2@ff018000 {
+			compatible = "amlogic,c3-mipi-csi2";
+			reg = <0x0 0xff018000 0x0 0x100>,
+			      <0x0 0xff019000 0x0 0x300>,
+			      <0x0 0xff01a000 0x0 0x100>;
+			reg-names = "aphy", "dphy", "host";
+			power-domains = <&pwrc PWRC_C3_MIPI_ISP_WRAP_ID>;
+			clocks = <&clkc_periphs CLKID_VAPB>,
+				 <&clkc_periphs CLKID_CSI_PHY0>;
+			clock-names = "vapb", "phy0";
+			assigned-clocks = <&clkc_periphs CLKID_VAPB>,
+					  <&clkc_periphs CLKID_CSI_PHY0>;
+			assigned-clock-rates = <0>, <200000000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					c3_mipi_csi_out: endpoint {
+						remote-endpoint = <&c3_adap_in>;
+					};
+				};
+			};
+		};
+
+		adap: adap@ff010000 {
+			compatible = "amlogic,c3-mipi-adapter";
+			reg = <0x0 0xff010000 0x0 0x100>,
+			      <0x0 0xff01b000 0x0 0x100>,
+			      <0x0 0xff01d000 0x0 0x200>;
+			reg-names = "top", "fd", "rd";
+			power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>;
+			clocks = <&clkc_periphs CLKID_VAPB>,
+				 <&clkc_periphs CLKID_ISP0>;
+			clock-names = "vapb", "isp0";
+			assigned-clocks = <&clkc_periphs CLKID_VAPB>,
+					  <&clkc_periphs CLKID_ISP0>;
+			assigned-clock-rates = <0>, <400000000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					c3_adap_in: endpoint {
+						remote-endpoint = <&c3_mipi_csi_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					c3_adap_out: endpoint {
+						remote-endpoint = <&c3_isp_in>;
+					};
+				};
+			};
+		};
+
+		isp: isp@ff000000 {
+			compatible = "amlogic,c3-isp";
+			reg = <0x0 0xff000000 0x0 0xf000>;
+			reg-names = "isp";
+			power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>;
+			clocks = <&clkc_periphs CLKID_VAPB>,
+				 <&clkc_periphs CLKID_ISP0>;
+			clock-names = "vapb", "isp0";
+			assigned-clocks = <&clkc_periphs CLKID_VAPB>,
+					  <&clkc_periphs CLKID_ISP0>;
+			assigned-clock-rates = <0>, <400000000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+
+			port {
+				c3_isp_in: endpoint {
+					remote-endpoint = <&c3_adap_out>;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts b/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
new file mode 100644
index 000000000000..c45b22651798
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s6.dtsi"
+/ {
+	model = "Amlogic S905X5 BL209 Development Board";
+	compatible = "amlogic,bl209", "amlogic,s6";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x000000 0x0 0xe0000000>,
+		      <0x1 0x000000 0x0 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 27 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x1b00000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
new file mode 100644
index 000000000000..8ef631939033
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+#include <dt-bindings/power/amlogic,s6-pwrc.h>
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,s6-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@ff200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xff200000 0 0x10000>,
+			      <0x0 0xff240000 0 0x80000>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s6-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s6";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 9>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x8 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 7>;
+				};
+
+				gpiof: gpio@1a0 {
+					reg = <0 0x1a0 0 0x20>, <0 0x20 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_F<<8) 5>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 3>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				gpioa: gpio@280 {
+					reg = <0 0x280 0 0x20>, <0 0x40 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_A<<8) 16>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,s6-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x20>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
+			ao-secure@10220 {
+				compatible = "amlogic,s6-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts b/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts
new file mode 100644
index 000000000000..7fd4ac9321a6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7.dtsi"
+/ {
+	model = "Amlogic S805X3 BP201 Development Board";
+	compatible = "amlogic,bp201", "amlogic,s7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 35 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2300000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
new file mode 100644
index 000000000000..a3faf4d188e1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+#include <dt-bindings/power/amlogic,s7-pwrc.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>; /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,s7-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s7-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s7";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x40 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 12>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,s7-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x20>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
+			ao-secure@10220 {
+				compatible = "amlogic,s7-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts b/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
new file mode 100644
index 000000000000..2933fcdbc8ef
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-s7d.dtsi"
+/ {
+	model = "Amlogic S905X5M BM202 Development Board";
+	compatible = "amlogic,bm202", "amlogic,s7d";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 36 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2400000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
new file mode 100644
index 000000000000..0c4417bcd682
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
+#include <dt-bindings/power/amlogic,s7d-pwrc.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,s7d-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,s7d-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,pinctrl-s7d",
+					     "amlogic,pinctrl-s7";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+				gpioz: gpio@c0 {
+					reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>;
+				};
+
+				gpiox: gpio@100 {
+					reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+				};
+
+				gpioh: gpio@140 {
+					reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>;
+				};
+
+				gpiod: gpio@180 {
+					reg = <0 0x180 0 0x20>, <0 0x40 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 5>;
+				};
+
+				gpioe: gpio@1c0 {
+					reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+				};
+
+				gpioc: gpio@200 {
+					reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+				};
+
+				gpiob: gpio@240 {
+					reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+				};
+
+				gpiodv: gpio@280 {
+					reg = <0 0x280 0 0x20>, <0 0x8 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_DV<<8) 7>;
+				};
+
+				test_n: gpio@2c0 {
+					reg = <0 0x2c0 0 0x20>;
+					reg-names = "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges =
+						<&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+				};
+
+				gpiocc: gpio@300 {
+					reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+					reg-names = "gpio", "mux";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+				};
+			};
+
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,s7d-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x20>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
+			ao-secure@10220 {
+				compatible = "amlogic,s7d-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index ec743cad57db..6510068bcff9 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -53,6 +53,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu101: cpu@101 {
@@ -60,6 +67,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu102: cpu@102 {
@@ -67,6 +81,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu103: cpu@103 {
@@ -74,6 +95,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu0: cpu@0 {
@@ -81,6 +109,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu1: cpu@1 {
@@ -88,6 +123,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu2: cpu@2 {
@@ -95,6 +137,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu3: cpu@3 {
@@ -102,6 +151,31 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
+		};
+
+		l2_cache_l: l2-cache-cluster0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;  /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>; /* L2. 1 Mb */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 1eba0afb3fd9..27b68ed85c4c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -27,6 +27,12 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -36,6 +42,12 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -44,6 +56,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -233,6 +248,7 @@
 						groups = "uart_a_tx",
 							 "uart_a_rx";
 						function = "uart_a";
+						bias-pull-up;
 					};
 				};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index e9b22868983d..e95c91894968 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -83,6 +83,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			dynamic-power-coefficient = <140>;
@@ -94,6 +100,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			dynamic-power-coefficient = <140>;
@@ -105,6 +117,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			dynamic-power-coefficient = <140>;
@@ -115,6 +133,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -187,7 +208,7 @@
 			reg = <0x0 0xf9800000 0x0 0x400000>,
 			      <0x0 0xff646000 0x0 0x2000>,
 			      <0x0 0xf9f00000 0x0 0x100000>;
-			reg-names = "elbi", "cfg", "config";
+			reg-names = "dbi", "cfg", "config";
 			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
@@ -213,7 +234,7 @@
 			reg = <0x0 0xfa000000 0x0 0x400000>,
 			      <0x0 0xff648000 0x0 0x2000>,
 			      <0x0 0xfa400000 0x0 0x100000>;
-			reg-names = "elbi", "cfg", "config";
+			reg-names = "dbi", "cfg", "config";
 			interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
@@ -1164,7 +1185,7 @@
 						groups = "uart_tx_a",
 							 "uart_rx_a";
 						function = "uart_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1182,7 +1203,7 @@
 						groups = "uart_tx_b_x",
 							 "uart_rx_b_x";
 						function = "uart_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1200,7 +1221,7 @@
 						groups = "uart_tx_b_z",
 							 "uart_rx_b_z";
 						function = "uart_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1218,7 +1239,7 @@
 						groups = "uart_ao_tx_b_z",
 							 "uart_ao_rx_b_z";
 						function = "uart_ao_b_z";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1654,7 +1675,7 @@
 						groups = "uart_ao_tx_a",
 							 "uart_ao_rx_a";
 						function = "uart_ao_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1672,7 +1693,7 @@
 						groups = "uart_ao_tx_b",
 							 "uart_ao_rx_b";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1693,8 +1714,12 @@
 			};
 
 			pwm_AO_cd: pwm@2000 {
-				compatible = "amlogic,meson-axg-ao-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x02000  0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1728,8 +1753,12 @@
 			};
 
 			pwm_AO_ab: pwm@7000 {
-				compatible = "amlogic,meson-axg-ao-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x07000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1806,15 +1835,23 @@
 			};
 
 			pwm_ab: pwm@1b000 {
-				compatible = "amlogic,meson-axg-ee-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1b000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc CLKID_FCLK_DIV5>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@1a000 {
-				compatible = "amlogic,meson-axg-ee-pwm";
+				compatible = "amlogic,meson-axg-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1a000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc CLKID_FCLK_DIV5>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 49b51c54013f..ca455f634834 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -138,7 +138,7 @@
 			reg = <0x0 0xfc000000 0x0 0x400000>,
 			      <0x0 0xff648000 0x0 0x2000>,
 			      <0x0 0xfc400000 0x0 0x200000>;
-			reg-names = "elbi", "cfg", "config";
+			reg-names = "dbi", "cfg", "config";
 			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
@@ -1503,7 +1503,7 @@
 							groups = "uart_a_tx",
 								 "uart_a_rx";
 							function = "uart_a";
-							bias-disable;
+							bias-pull-up;
 						};
 					};
 
@@ -1521,7 +1521,7 @@
 							groups = "uart_b_tx",
 								 "uart_b_rx";
 							function = "uart_b";
-							bias-disable;
+							bias-pull-up;
 						};
 					};
 
@@ -1918,7 +1918,7 @@
 						groups = "uart_ao_a_tx",
 							 "uart_ao_a_rx";
 						function = "uart_ao_a";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1936,7 +1936,7 @@
 						groups = "uart_ao_b_tx_2",
 							 "uart_ao_b_rx_3";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -1945,7 +1945,7 @@
 						groups = "uart_ao_b_tx_8",
 							 "uart_ao_b_rx_9";
 						function = "uart_ao_b";
-						bias-disable;
+						bias-pull-up;
 					};
 				};
 
@@ -2060,8 +2060,11 @@
 			};
 
 			pwm_AO_cd: pwm@2000 {
-				compatible = "amlogic,meson-g12a-ao-pwm-cd";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x2000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -2099,8 +2102,13 @@
 			};
 
 			pwm_AO_ab: pwm@7000 {
-				compatible = "amlogic,meson-g12a-ao-pwm-ab";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x7000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_CLK81>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV5>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -2301,22 +2309,37 @@
 			};
 
 			pwm_ef: pwm@19000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x19000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@1a000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1a000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_ab: pwm@1b000 {
-				compatible = "amlogic,meson-g12a-ee-pwm";
+				compatible = "amlogic,meson-g12-pwm-v2",
+					     "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x1b000 0x0 0x20>;
+				clocks = <&xtal>,
+					 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_FCLK_DIV3>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
index a457b3f4397b..d0a3b4b9229c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
@@ -267,28 +267,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
@@ -346,8 +342,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -355,8 +349,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pdm {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
index c779a5da7d1e..4353485c6f26 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -220,28 +220,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -284,8 +280,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -293,8 +287,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index ea51341f031b..f39fcabc763f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -314,28 +314,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -389,8 +385,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -398,8 +392,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pdm {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index f70a46967e2b..b5bf8ecc91e6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -407,28 +407,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &clkc_audio {
@@ -502,8 +498,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 32f98a192494..5ab460a3e637 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -263,28 +263,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -328,8 +324,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -363,8 +357,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &uart_A {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 543e70669df5..1321ad95923d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -17,6 +17,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -26,6 +32,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -35,6 +47,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -44,6 +62,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -52,6 +76,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -62,6 +89,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
index 124a80901084..9fd68195be3f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
@@ -39,3 +39,7 @@
 	phy-names = "usb2-phy0", "usb2-phy1";
 };
  */
+
+&npu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
index 65b963d794cd..82546b738977 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
@@ -76,46 +76,42 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>;
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
+};
+
+&npu {
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index 8e9ad1e51d66..8ecb5bd125c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -14,6 +14,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -54,6 +55,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 08c33ec7e9f1..39011b645128 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -155,42 +155,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
@@ -257,8 +251,6 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 
 	status = "okay";
 };
@@ -273,8 +265,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index d4e1990b5f26..1b08303c4282 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -263,42 +263,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
@@ -367,8 +361,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pwm_ef {
@@ -380,8 +372,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
index de35fa2d7a6d..8e3e3354ed67 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
@@ -116,6 +116,10 @@
 	status = "okay";
 };
 
+&clkc_audio {
+	status = "okay";
+};
+
 &frddr_a {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 16dd409051b4..fc737499f207 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -51,57 +51,47 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
index e21831dfceee..d5938a4a6da3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -281,42 +281,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 /* RK817 only supports 12.5mV steps, round up the values */
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
index 09d959aefb18..3298d59833b6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
@@ -227,42 +227,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu_thermal {
@@ -327,16 +321,12 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
index 39feba7f2d08..1e5c6f984945 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -259,42 +259,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu_thermal {
@@ -379,32 +373,24 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_ab {
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 44c23c984034..19cad93a6889 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -14,6 +14,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -59,6 +60,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index 4cb6930ffb19..9b6d780eada7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -213,42 +213,36 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -304,24 +298,18 @@
 &pwm_ab {
 	pinctrl-0 = <&pwm_a_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index 86e6ceb31d5e..23358d94844c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -49,7 +49,13 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <592>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -59,7 +65,13 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <592>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -69,7 +81,13 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
@@ -79,7 +97,13 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
@@ -89,7 +113,13 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
@@ -99,14 +129,32 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
-		l2: l2-cache0 {
+		l2_cache_l: l2-cache-cluster0 {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x40000>;  /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>; /* L2. 1MB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index d38c3a224fbe..2da49cfbde77 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -345,24 +345,18 @@
 &pwm_AO_ab {
 	pinctrl-0 = <&pwm_ao_a_3_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ab {
 	pinctrl-0 = <&pwm_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
 &pwm_ef {
 	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 45ccddd1aaf0..b4f88ed6273b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -97,7 +97,7 @@
 		clock-names = "ext_clock";
 	};
 
-	cvbs-connector {
+	cvbs_connector: cvbs-connector {
 		compatible = "composite-video-connector";
 
 		port {
@@ -240,8 +240,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 2673f0dbafe7..c1d8e81d95cb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -95,6 +95,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -105,6 +111,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -115,6 +127,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -125,6 +143,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -134,6 +158,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -329,14 +356,14 @@
 			};
 
 			pwm_ab: pwm@8550 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x08550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
 			pwm_cd: pwm@8650 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x08650 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
@@ -351,7 +378,7 @@
 			};
 
 			pwm_ef: pwm@86c0 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x086c0 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
@@ -498,7 +525,7 @@
 			};
 
 			pwm_AO_ab: pwm@550 {
-				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
+				compatible = "amlogic,meson-gxbb-pwm-v2", "amlogic,meson8-pwm-v2";
 				reg = <0x0 0x00550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index cf2e2ef81680..2ecc6ebd5a43 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -298,8 +298,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 7d7dde93fff3..c09da40ff7b0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -241,8 +241,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 959bd8d77a82..12e26f99d4f0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -348,10 +348,6 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 52d57773a77f..6f67364fd63f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -150,8 +150,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -178,9 +176,8 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 3807a184810b..6ff567225fee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -222,8 +222,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index deb295227189..bfedfc1472ec 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -185,8 +185,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index ed00e67e6923..f69923da07fe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -105,7 +105,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -122,7 +122,7 @@
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -520,7 +520,7 @@
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -538,7 +538,7 @@
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -556,7 +556,7 @@
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -739,6 +739,31 @@
 	};
 };
 
+&pwm_ab {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_AO_ab {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+};
+
+&pwm_cd {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_ef {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
 &pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
index c5e2306ad7a4..ca7c4e8e7cac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -280,8 +280,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* This is connected to the Bluetooth module: */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts
new file mode 100644
index 000000000000..cac15b89c573
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Ferass El Hafidi <funderscore@postmarketos.org>
+ * Heavily based on meson-gxl-s805x-p241.dtb:
+ *  - Copyright (c) 2018 BayLibre, SAS.
+ *    Author: Neil Armstrong <narmstrong@baylibre.com>
+ *    Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s805y.dtsi"
+
+/ {
+	compatible = "xiaomi,aquaman", "amlogic,s805y", "amlogic,meson-gxl";
+	model = "Xiaomi Mi TV Stick (aquaman)";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "XIAOMI-AQUAMAN";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module (Amlogic W155S1 / Realtek RTL8821CS) */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	sdio: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+/*
+ * This is connected to the Bluetooth module
+ * Note: There's no driver for the Bluetooth module of some variants yet.
+ */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+	vbus-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi
new file mode 100644
index 000000000000..49b29b71f732
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805y.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Ferass El Hafidi <funderscore@postmarketos.org>
+ */
+
+#include "meson-gxl-s805x.dtsi"
+
+/ {
+	compatible = "amlogic,s805y", "amlogic,meson-gxl";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index c1470416faad..7dffeb5931c9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -102,8 +102,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
index 92c425d0259c..ff9145d49090 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
@@ -21,8 +21,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 2b94b6e5285e..4ca90ac947b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -116,8 +116,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
index 89fe5110f7a2..62a2da766a00 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -115,8 +115,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* SD card */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index a80f0ea2773b..4e89d6f6bb57 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -211,8 +211,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal> , <&xtal>;
-	clock-names = "clkin0", "clkin1" ;
 };
 
 &pwm_ef {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index c79f9f2099bf..236cedec9f19 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -145,8 +145,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index 7e7dc87ede2d..05a0d4de3ad7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -101,8 +101,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &saradc {
@@ -134,9 +132,8 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index f58d1790de1c..ba535010a3c9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -163,7 +163,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -180,7 +180,7 @@
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -188,7 +188,7 @@
 			mux {
 				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
 				function = "uart_ao_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -214,7 +214,7 @@
 				groups = "i2c_sck_ao",
 				       "i2c_sda_ao";
 				function = "i2c_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -522,7 +522,7 @@
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -540,7 +540,7 @@
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -558,7 +558,7 @@
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -576,7 +576,7 @@
 				groups = "i2c_sck_a",
 				     "i2c_sda_a";
 				function = "i2c_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -585,7 +585,7 @@
 				groups = "i2c_sck_b",
 				      "i2c_sda_b";
 				function = "i2c_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -594,7 +594,7 @@
 				groups = "i2c_sck_c",
 				      "i2c_sda_c";
 				function = "i2c_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -603,7 +603,7 @@
 				groups = "i2c_sck_c_dv19",
 				      "i2c_sda_c_dv18";
 				function = "i2c_c";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -809,6 +809,31 @@
 	};
 };
 
+&pwm_ab {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_AO_ab {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+};
+
+&pwm_cd {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_ef {
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "vid_pll" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
 &pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
index 942df754a0ed..1221f4545130 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts
@@ -38,6 +38,10 @@
 	};
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc";
+};
+
 &usb {
 	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 96a3dd2d8a99..2a09b3d550e2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -289,16 +289,12 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &pwm_ef {
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 &sd_emmc_a {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index d4858afa0e9c..feb31207773f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -72,8 +72,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
index d02b80d77378..6c8bec1853ac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
@@ -21,8 +21,7 @@
 };
 
 &sd_emmc_a {
-	brcmf: wifi@1 {
+	sdio: wifi@1 {
 		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 7356d3b628b1..9d5a481b309f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -192,8 +192,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -219,7 +217,7 @@
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: brcmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts
new file mode 100644
index 000000000000..9a62176cfe5a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "oranth,tx9-pro", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Tanix TX9 Pro";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts
new file mode 100644
index 000000000000..ba871f3f53bb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Debug UART (3.3V, 115200 baud) at the corner of the board:
+ *   (4) (3) (2) [1]
+ *   Vcc RXD TXD GND
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "ugoos,am3", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Ugoos AM3";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+};
+
+&cvbs_connector {
+	/* Not used on this board */
+	status = "disabled";
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_b_pins>;
+
+	rtc: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+/* WLAN: Atheros 10k (QCA9377) */
+&sd_emmc_a {
+	max-frequency = <200000000>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	max-frequency = <100000000>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 411cc312fc62..514c9bea6423 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -64,6 +64,12 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -75,6 +81,12 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -86,6 +98,12 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -97,6 +115,12 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
index 929e4720ae76..ac9c4c2673b1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
@@ -458,24 +458,18 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 };
 
 &pwm_ab {
 	status = "okay";
 	pinctrl-0 = <&pwm_b_x7_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 };
 
 &pwm_cd {
 	status = "okay";
 	pinctrl-0 = <&pwm_d_x3_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index 957577d986c0..9d99ed2994df 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -629,6 +629,11 @@
 				};
 			};
 
+			clk_msr: clock-measure@48000 {
+				compatible = "amlogic,s4-clk-measure";
+				reg = <0x0 0x48000 0x0 0x1c>;
+			};
+
 			spicc0: spi@50000 {
 				compatible = "amlogic,meson-g12a-spicc";
 				reg = <0x0 0x50000 0x0 0x44>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
index d1fa8b8bf795..9be3084b090d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -147,28 +147,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -199,15 +195,11 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -215,8 +207,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index 81dce862902a..5e07f0f9538e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -185,28 +185,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
@@ -367,8 +363,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -386,11 +380,10 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	max-frequency = <50000000>;
+	/* Boot failures are observed at 50MHz */
+	max-frequency = <35000000>;
 	disable-wp;
 
-	/* TOFIX: SD card is barely usable in SDR modes */
-
 	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&tflash_vdd>;
 	vqmmc-supply = <&vddio_c>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index 9c0b544e2209..a3d9b66b6878 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -51,35 +51,29 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index 7b0e9817a615..c4524eb4f099 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -250,28 +250,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
@@ -392,8 +388,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
index 537370db360f..5daadfb170b4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
@@ -64,26 +64,22 @@
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 2e3397e55da2..024d2eb8e6ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -359,28 +359,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
@@ -435,15 +431,11 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -451,8 +443,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &saradc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 97e4b52066dc..e5db8ce94062 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -55,6 +55,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -64,6 +70,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -73,6 +85,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -82,6 +100,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -90,6 +114,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x40000>; /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 
@@ -100,6 +127,7 @@
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 5a64239b4708..5bbedb0a7107 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -22,7 +22,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
-			#clock-cells = <1>;
 			clocks = <&pmd0clk 0>;
 		};
 		cpu@1 {
@@ -32,7 +31,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
-			#clock-cells = <1>;
 			clocks = <&pmd0clk 0>;
 		};
 		cpu@100 {
@@ -42,7 +40,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
-			#clock-cells = <1>;
 			clocks = <&pmd1clk 0>;
 		};
 		cpu@101 {
@@ -52,7 +49,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
-			#clock-cells = <1>;
 			clocks = <&pmd1clk 0>;
 		};
 		cpu@200 {
@@ -62,7 +58,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
-			#clock-cells = <1>;
 			clocks = <&pmd2clk 0>;
 		};
 		cpu@201 {
@@ -72,7 +67,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
-			#clock-cells = <1>;
 			clocks = <&pmd2clk 0>;
 		};
 		cpu@300 {
@@ -82,7 +76,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
-			#clock-cells = <1>;
 			clocks = <&pmd3clk 0>;
 		};
 		cpu@301 {
@@ -92,7 +85,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
-			#clock-cells = <1>;
 			clocks = <&pmd3clk 0>;
 		};
 		xgene_L2_0: l2-cache-0 {
@@ -211,9 +203,9 @@
 		};
 	};
 
-	refclk: refclk {
+	refclk: clock-100000000 {
 		compatible = "fixed-clock";
-		#clock-cells = <1>;
+		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "refclk";
 	};
@@ -232,6 +224,16 @@
 		clock-frequency = <50000000>;
 	};
 
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
+
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -246,7 +248,7 @@
 			pmdpll: pmdpll@170000f0 {
 				compatible = "apm,xgene-pcppll-v2-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				reg = <0x0 0x170000f0 0x0 0x10>;
 				clock-output-names = "pmdpll";
 			};
@@ -286,7 +288,7 @@
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-v2-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				reg = <0x0 0x17000120 0x0 0x1000>;
 				clock-output-names = "socpll";
 			};
@@ -585,16 +587,6 @@
 					0x0 0x7 0x4>;
 		};
 
-		i2cslimpro {
-			compatible = "apm,xgene-slimpro-i2c";
-			mboxes = <&mailbox 0>;
-		};
-
-		hwmonslimpro {
-			compatible = "apm,xgene-slimpro-hwmon";
-			mboxes = <&mailbox 7>;
-		};
-
 		serial0: serial@10600000 {
 			compatible = "ns16550";
 			reg = <0 0x10600000 0x0 0x1000>;
@@ -617,7 +609,7 @@
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";
-			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			compatible = "apm,xgene-pcie";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -643,7 +635,7 @@
 		pcie1: pcie@1f2c0000 {
 			status = "disabled";
 			device_type = "pci";
-			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			compatible = "apm,xgene-pcie";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 872093b05ce1..4ca0ead120c1 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -103,6 +103,7 @@
 
 	gic: interrupt-controller@78010000 {
 		compatible = "arm,cortex-a15-gic";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x78010000 0x0 0x1000>,	/* GIC Dist */
@@ -112,9 +113,9 @@
 		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
 	};
 
-	refclk: refclk {
+	refclk: clock-100000000 {
 		compatible = "fixed-clock";
-		#clock-cells = <1>;
+		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "refclk";
 	};
@@ -133,6 +134,16 @@
 		interrupts = <1 12 0xff04>;
 	};
 
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
+
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -148,28 +159,25 @@
 			pcppll: pcppll@17000100 {
 				compatible = "apm,xgene-pcppll-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				clock-names = "pcppll";
 				reg = <0x0 0x17000100 0x0 0x1000>;
 				clock-output-names = "pcppll";
-				type = <0>;
 			};
 
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				clock-names = "socpll";
 				reg = <0x0 0x17000120 0x0 0x1000>;
 				clock-output-names = "socpll";
-				type = <1>;
 			};
 
 			socplldiv2: socplldiv2  {
 				compatible = "fixed-factor-clock";
-				#clock-cells = <1>;
+				#clock-cells = <0>;
 				clocks = <&socpll 0>;
-				clock-names = "socplldiv2";
 				clock-mult = <1>;
 				clock-div = <2>;
 				clock-output-names = "socplldiv2";
@@ -178,7 +186,7 @@
 			ahbclk: ahbclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "div-reg";
 				divider-offset = <0x164>;
@@ -190,7 +198,7 @@
 			sdioclk: sdioclk@1f2ac000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2ac000 0x0 0x1000
 					0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg", "div-reg";
@@ -207,7 +215,7 @@
 			ethclk: ethclk {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				clock-names = "ethclk";
 				reg = <0x0 0x17000000 0x0 0x1000>;
 				reg-names = "div-reg";
@@ -229,7 +237,7 @@
 			sge0clk: sge0clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0xa>;
@@ -240,7 +248,7 @@
 			xge0clk: xge0clk@1f61c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f61c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0x3>;
@@ -251,7 +259,7 @@
 				compatible = "apm,xgene-device-clock";
 				status = "disabled";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f62c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0x3>;
@@ -261,7 +269,7 @@
 			sataphy1clk: sataphy1clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy1clk";
@@ -275,7 +283,7 @@
 			sataphy2clk: sataphy1clk@1f22c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f22c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy2clk";
@@ -289,7 +297,7 @@
 			sataphy3clk: sataphy1clk@1f23c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f23c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy3clk";
@@ -303,7 +311,7 @@
 			sata01clk: sata01clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata01clk";
@@ -316,7 +324,7 @@
 			sata23clk: sata23clk@1f22c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f22c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata23clk";
@@ -329,7 +337,7 @@
 			sata45clk: sata45clk@1f23c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f23c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata45clk";
@@ -342,7 +350,7 @@
 			rtcclk: rtcclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg";
 				csr-offset = <0xc>;
@@ -355,7 +363,7 @@
 			rngpkaclk: rngpkaclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg";
 				csr-offset = <0xc>;
@@ -369,7 +377,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2bc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie0clk";
@@ -379,7 +387,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2cc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie1clk";
@@ -389,7 +397,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2dc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie2clk";
@@ -399,7 +407,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f50c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie3clk";
@@ -409,7 +417,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f51c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie4clk";
@@ -418,7 +426,7 @@
 			dmaclk: dmaclk@1f27c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f27c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "dmaclk";
@@ -760,16 +768,6 @@
 					<0x0 0x7 0x4>;
 		};
 
-		i2cslimpro {
-			compatible = "apm,xgene-slimpro-i2c";
-			mboxes = <&mailbox 0>;
-		};
-
-		hwmonslimpro {
-			compatible = "apm,xgene-slimpro-hwmon";
-			mboxes = <&mailbox 7>;
-		};
-
 		serial0: serial@1c020000 {
 			status = "disabled";
 			compatible = "ns16550a";
@@ -849,7 +847,6 @@
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0x10512000 0x0 0x1000>;
 			interrupts = <0 0x44 0x4>;
-			#clock-cells = <1>;
 			clocks = <&ahbclk 0>;
 		};
 
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
index ab6ebb53218a..4eebcd85c90f 100644
--- a/arch/arm64/boot/dts/apple/Makefile
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -46,6 +46,22 @@ dtb-$(CONFIG_ARCH_APPLE) += t8011-j120.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8011-j121.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8011-j207.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8011-j208.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j132.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j137.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j140a.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j140k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j152f.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j160.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j174.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j185.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j185f.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j213.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j215.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j223.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j230k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j214k.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j680.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8012-j780.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8015-d201.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8015-d20.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8015-d211.dtb
@@ -63,6 +79,15 @@ dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j180d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j414s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j414c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j416s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j416c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j474s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j475c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j475d.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j415.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi
index 0b16adf07f79..8868df1538d6 100644
--- a/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi
+++ b/arch/arm64/boot/dts/apple/s5l8960x-5s.dtsi
@@ -8,6 +8,7 @@
 
 #include "s5l8960x.dtsi"
 #include "s5l8960x-common.dtsi"
+#include "s5l8960x-opp.dtsi"
 #include <dt-bindings/input/input.h>
 
 / {
@@ -49,3 +50,11 @@
 		};
 	};
 };
+
+&dwi_bl {
+	status = "okay";
+};
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi
index 741c5a9f21dd..dd57eb1d34c0 100644
--- a/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi
+++ b/arch/arm64/boot/dts/apple/s5l8960x-air1.dtsi
@@ -8,6 +8,7 @@
 
 #include "s5l8960x.dtsi"
 #include "s5l8960x-common.dtsi"
+#include "s5l8965x-opp.dtsi"
 #include <dt-bindings/input/input.h>
 
 / {
@@ -49,3 +50,7 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi
index b27ef5680626..f3696d22e71c 100644
--- a/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi
+++ b/arch/arm64/boot/dts/apple/s5l8960x-mini2.dtsi
@@ -8,6 +8,7 @@
 
 #include "s5l8960x.dtsi"
 #include "s5l8960x-common.dtsi"
+#include "s5l8960x-opp.dtsi"
 #include <dt-bindings/input/input.h>
 
 / {
@@ -49,3 +50,7 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi
new file mode 100644
index 000000000000..e4d568c4a119
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-opp.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Operating points for Apple S5L8960X "A7" SoC, Up to 1296 MHz
+ *
+ * target-type: N51, N53, J85, J86. J87, J85m, J86m, J87m
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	cyclone_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <15500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <43000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <26000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <4>;
+			clock-latency-ns = <30000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <5>;
+			clock-latency-ns = <39500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <6>;
+			clock-latency-ns = <45500>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi b/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi
new file mode 100644
index 000000000000..da265f484307
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8960x-pmgr.dtsi
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S5L8960X "A7" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@20000 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@20008 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_secuart0: power-controller@200f0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "secuart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_secuart1: power-controller@200f8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "secuart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_cpm: power-controller@20010 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_lio: power-controller@20018 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "lio";
+		apple,always-on; /* Core device */
+	};
+
+	ps_iomux: power-controller@20020 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@20028 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_debug: power-controller@20030 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_dwi: power-controller@20038 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20038 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@20040 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_mca0: power-controller@20048 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@20050 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@20058 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@20060 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20060 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@20068 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20068 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@20070 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20070 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@20078 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20078 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@20080 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20080 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@20088 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20088 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@20090 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20090 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@20098 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20098 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@200a0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@200a8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@200b0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@200b8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@200c0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@200c8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@200d0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@200d8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@200e0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@200e8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio_p: power-controller@20110 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+	};
+
+	ps_usb: power-controller@20158 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@20160 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@20170 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@20180 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_disp_busmux: power-controller@201a8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp_busmux";
+	};
+
+	ps_media: power-controller@201d8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@201d0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+	};
+
+	ps_msr: power-controller@201e0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@201e8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@201b0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_aes0: power-controller@20100 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@20108 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@20118 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_hsic1_phy: power-controller@20120 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_hsic2_phy: power-controller@20128 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic2_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_ispsens0: power-controller@20130 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@20138 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_mcc: power-controller@20140 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mcu: power-controller@20148 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcu";
+		apple,always-on; /* Core device */
+	};
+
+	ps_amp: power-controller@20150 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "amp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb2host0_ohci: power-controller@20168 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2host1_ohci: power-controller@20178 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1_ohci";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_usbotg: power-controller@20188 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@20190 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@20198 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_cp: power-controller@201a0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mipi_dsi: power-controller@201b8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_dp: power-controller@201c0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_disp1: power-controller@201c8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_vdec: power-controller@201f0 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@201f8 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans: power-controller@20200 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+	};
+
+	ps_ans_dll: power-controller@20208 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans_dll";
+		power-domains = <&ps_ans>;
+	};
+
+	ps_gfx: power-controller@20218 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@20268 {
+		compatible = "apple,s5l8960x-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		power-domains = <&ps_secuart1>, <&ps_secuart0>;
+		apple,always-on; /* Locked on */
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s5l8960x.dtsi b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
index 0218ecac1d83..462ffdd348fc 100644
--- a/arch/arm64/boot/dts/apple/s5l8960x.dtsi
+++ b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
@@ -33,16 +33,33 @@
 			compatible = "apple,cyclone";
 			reg = <0x0 0x0>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&cyclone_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu1: cpu@1 {
 			compatible = "apple,cyclone";
 			reg = <0x0 0x1>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&cyclone_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
 		};
 	};
 
@@ -53,6 +70,12 @@
 		nonposted-mmio;
 		ranges;
 
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s5l8960x-cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
 		serial0: serial@20a0a0000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x0a0a0000 0x0 0x4000>;
@@ -62,9 +85,74 @@
 			/* Use the bootloader-enabled clocks for now. */
 			clocks = <&clkref>, <&clkref>;
 			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 154 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 155 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 156 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 157 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s5l8960x-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x24000>;
+		};
+
 		wdt: watchdog@20e027000 {
 			compatible = "apple,s5l8960x-wdt", "apple,wdt";
 			reg = <0x2 0x0e027000 0x0 0x1000>;
@@ -78,11 +166,20 @@
 			reg = <0x2 0x0e100000 0x0 0x100000>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200010 {
+			compatible = "apple,s5l8960x-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200010 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
 		};
 
 		pinctrl: pinctrl@20e300000 {
 			compatible = "apple,s5l8960x-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x0e300000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -99,6 +196,26 @@
 				     <AIC_IRQ 112 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(81, 1)>,
+					 <APPLE_PINMUX(80, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(83, 1)>,
+					 <APPLE_PINMUX(82, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(101, 1)>,
+					 <APPLE_PINMUX(100, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(172, 1)>,
+					 <APPLE_PINMUX(171, 1)>;
+			};
 		};
 	};
 
@@ -111,3 +228,5 @@
 			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
+
+#include "s5l8960x-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi b/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi
new file mode 100644
index 000000000000..d34dae74a90c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s5l8965x-opp.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Operating points for Apple S5L8965X "A7" Rev A SoC, Up to 1392 MHz
+ *
+ * target-type: J71, J72, J73
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	cyclone_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <10000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <2>;
+			clock-latency-ns = <49000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <3>;
+			clock-latency-ns = <30000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <4>;
+			clock-latency-ns = <39500>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <5>;
+			clock-latency-ns = <45500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-level = <6>;
+			clock-latency-ns = <46500>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi b/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi
index 4276bd890e81..cb42c5f2c1b6 100644
--- a/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi
+++ b/arch/arm64/boot/dts/apple/s800-0-3-common.dtsi
@@ -43,6 +43,10 @@
 	};
 };
 
+&dwi_bl {
+	status = "okay";
+};
+
 &serial0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi b/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi
new file mode 100644
index 000000000000..196b8e745a95
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S8000/3 "A9" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80150 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80158 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80168 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80170 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80178 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80180 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80188 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80190 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@80198 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@801f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80160 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_hsic1_phy: power-controller@80130 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_isp_sens0: power-controller@80138 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80140 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_usb: power-controller@80250 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80258 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80260 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80270 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@80280 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@802c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@802e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@802b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_pmp: power-controller@802e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@802f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_uart5: power-controller@80200 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80208 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80210 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80218 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@80220 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80228 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80230 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80238 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80240 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80248 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80268 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2host1_ohci: power-controller@80278 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1_ohci";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_usb2host2_ohci: power-controller@80288 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2_ohci";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_usbotg: power-controller@80290 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@80298 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_dp: power-controller@802c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_vdec: power-controller@802f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@80308 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80310 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@80318 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_pcie_link0: power-controller@80320 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link0";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link1: power-controller@80328 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link1";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link2: power-controller@80330 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link2";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link3: power-controller@80338 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link3";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_gfx: power-controller@80340 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_pipe: power-controller@88000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@88008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_busif &ps_aop_cpu &ps_aop_filter>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+		power-domains = <&ps_aop>;
+	};
+
+	ps_aop_cpu: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80048 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80050 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s800-0-3.dtsi b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
new file mode 100644
index 000000000000..bb38662b7d2e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8000/S8003 "A9" SoC
+ *
+ * This file contains parts common to both variants of A9
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,twister";
+			reg = <0x0 0x0>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,twister";
+			reg = <0x0 0x1>;
+			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a0c0000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a0c0000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 206 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 207 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 208 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,s8000-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200080 {
+			compatible = "apple,s8000-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200080 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 208>;
+			apple,npins = <208>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					 <APPLE_PINMUX(45, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(115, 1)>,
+					 <APPLE_PINMUX(114, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(23, 1)>,
+					 <APPLE_PINMUX(22, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 119 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2102b0000 {
+			compatible = "apple,s8000-wdt", "apple,wdt";
+			reg = <0x2 0x102b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that A9 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "s800-0-3-pmgr.dtsi"
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s8000.dtsi b/arch/arm64/boot/dts/apple/s8000.dtsi
index 6e9046ea106c..72322f5677ab 100644
--- a/arch/arm64/boot/dts/apple/s8000.dtsi
+++ b/arch/arm64/boot/dts/apple/s8000.dtsi
@@ -4,141 +4,65 @@
  *
  * Other names: H8P, "Maui"
  *
- * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
  */
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/apple-aic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/apple.h>
+#include "s800-0-3.dtsi"
 
 / {
-	interrupt-parent = <&aic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
 
-	clkref: clock-ref {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "clkref";
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "apple,twister";
-			reg = <0x0 0x0>;
-			cpu-release-addr = <0 0>; /* To be filled in by loader */
-			enable-method = "spin-table";
-			device_type = "cpu";
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <650>;
 		};
-
-		cpu1: cpu@1 {
-			compatible = "apple,twister";
-			reg = <0x0 0x1>;
-			cpu-release-addr = <0 0>; /* To be filled in by loader */
-			enable-method = "spin-table";
-			device_type = "cpu";
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <75000>;
 		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		nonposted-mmio;
-		ranges;
-
-		serial0: serial@20a0c0000 {
-			compatible = "apple,s5l-uart";
-			reg = <0x2 0x0a0c0000 0x0 0x4000>;
-			reg-io-width = <4>;
-			interrupt-parent = <&aic>;
-			interrupts = <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>;
-			/* Use the bootloader-enabled clocks for now. */
-			clocks = <&clkref>, <&clkref>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <27000>;
 		};
-
-		aic: interrupt-controller@20e100000 {
-			compatible = "apple,s8000-aic", "apple,aic";
-			reg = <0x2 0x0e100000 0x0 0x100000>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
+		opp04 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <4>;
+			clock-latency-ns = <32000>;
 		};
-
-		pinctrl_ap: pinctrl@20f100000 {
-			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
-			reg = <0x2 0x0f100000 0x0 0x100000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_ap 0 0 208>;
-			apple,npins = <208>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&aic>;
-			interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+		opp05 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
 		};
-
-		pinctrl_aop: pinctrl@2100f0000 {
-			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
-			reg = <0x2 0x100f0000 0x0 0x100000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_aop 0 0 42>;
-			apple,npins = <42>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&aic>;
-			interrupts = <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 115 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 118 IRQ_TYPE_LEVEL_HIGH>,
-				     <AIC_IRQ 119 IRQ_TYPE_LEVEL_HIGH>;
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <6>;
+			clock-latency-ns = <45000>;
 		};
-
-		wdt: watchdog@2102b0000 {
-			compatible = "apple,s8000-wdt", "apple,wdt";
-			reg = <0x2 0x102b0000 0x0 0x4000>;
-			clocks = <&clkref>;
-			interrupt-parent = <&aic>;
-			interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <7>;
+			clock-latency-ns = <58000>;
 		};
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupt-parent = <&aic>;
-		interrupt-names = "phys", "virt";
-		/* Note that A9 doesn't actually have a hypervisor (EL2 is not implemented). */
-		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
-			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-level = <8>;
+			clock-latency-ns = <58000>;
+			turbo-mode;
+		};
+#endif
 	};
 };
 
 /*
  * The A9 was made by two separate fabs on two different process
  * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
- * the S8003 (APL1022) on 16nm. While they are seemingly the same,
- * they do have distinct part numbers and devices using them have
- * distinct model names. There are currently no known differences
- * between these as far as Linux is concerned, but let's keep things
- * structured properly to make it easier to alter the behaviour of
- * one of the chips if need be.
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
  */
diff --git a/arch/arm64/boot/dts/apple/s8001-common.dtsi b/arch/arm64/boot/dts/apple/s8001-common.dtsi
index e94d0e77653a..91b06e113894 100644
--- a/arch/arm64/boot/dts/apple/s8001-common.dtsi
+++ b/arch/arm64/boot/dts/apple/s8001-common.dtsi
@@ -24,6 +24,7 @@
 		framebuffer0: framebuffer@0 {
 			compatible = "apple,simple-framebuffer", "simple-framebuffer";
 			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0 &ps_dp0>;
 			/* Format properties will be added by loader */
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi b/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi
new file mode 100644
index 000000000000..e66a4c1c138f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-j98a-j99a.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Pro (12.9-inch)
+ *
+ * This file contains parts common to iPad Pro (12.9-inch).
+ *
+ * target-type: J98a, J99a
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+&ps_dcs4 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs5 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs6 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs7 {
+	apple,always-on; /* LPDDR4 interface */
+};
diff --git a/arch/arm64/boot/dts/apple/s8001-j98a.dts b/arch/arm64/boot/dts/apple/s8001-j98a.dts
index 6d6b841e7ab0..162eca05c2d9 100644
--- a/arch/arm64/boot/dts/apple/s8001-j98a.dts
+++ b/arch/arm64/boot/dts/apple/s8001-j98a.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "s8001-pro.dtsi"
+#include "s8001-j98a-j99a.dtsi"
 
 / {
 	compatible = "apple,j98a", "apple,s8001", "apple,arm-platform";
diff --git a/arch/arm64/boot/dts/apple/s8001-j99a.dts b/arch/arm64/boot/dts/apple/s8001-j99a.dts
index d20194b1cae7..7b765820c69e 100644
--- a/arch/arm64/boot/dts/apple/s8001-j99a.dts
+++ b/arch/arm64/boot/dts/apple/s8001-j99a.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "s8001-pro.dtsi"
+#include "s8001-j98a-j99a.dtsi"
 
 / {
 	compatible = "apple,j99a", "apple,s8001", "apple,arm-platform";
diff --git a/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi b/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi
new file mode 100644
index 000000000000..859ab77ae92b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s8001-pmgr.dtsi
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple S8001 "A9X" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80148 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80150 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pcie_ref: power-controller@80140 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80160 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80168 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80170 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80178 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80180 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80188 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@80190 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@80198 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801a0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801b0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@801f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@801f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80158 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_isp_sens0: power-controller@80130 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80138 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb: power-controller@80278 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80280 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80288 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80298 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@802a8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802d0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_disp1mux: power-controller@802e8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1mux";
+	};
+
+	ps_disp0: power-controller@802d8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp1: power-controller@802f0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp1mux>;
+	};
+
+	ps_uart6: power-controller@80200 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80208 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80210 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@80218 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80230 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80238 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80240 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80248 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80250 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@80258 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+	};
+
+	ps_dcs5: power-controller@80260 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+	};
+
+	ps_dcs6: power-controller@80268 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+	};
+
+	ps_dcs7: power-controller@80270 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+	};
+
+	ps_usb2host0_ohci: power-controller@80290 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@802b8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@802c0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802c8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_dp0: power-controller@802e0 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp0";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_dp1: power-controller@802f8 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp1";
+		power-domains = <&ps_disp1>;
+	};
+
+	ps_dpa0: power-controller@80220 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+	};
+
+	ps_dpa1: power-controller@80228 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+	};
+
+	ps_media: power-controller@80308 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@80300 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@80318 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@80310 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc: power-controller@80340 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80348 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_srs: power-controller@80390 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "srs";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie_aux: power-controller@80350 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_pcie_link0: power-controller@80358 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link0";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link1: power-controller@80360 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link1";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link2: power-controller@80368 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link2";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link3: power-controller@80370 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link3";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link4: power-controller@80378 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link4";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_pcie_link5: power-controller@80380 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_link5";
+		power-domains = <&ps_pcie>;
+	};
+
+	ps_vdec: power-controller@80330 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80388 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_pmp: power-controller@80320 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@80328 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on*/
+	};
+
+	ps_venc_pipe: power-controller@88000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@88008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_cpu &ps_aop_filter &ps_aop_busif>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+	};
+
+	ps_aop_cpu: power-controller@80040 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80048 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80050 {
+		compatible = "apple,s8000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/s8001.dtsi b/arch/arm64/boot/dts/apple/s8001.dtsi
index 23ee3238844d..b5b00dca6ffa 100644
--- a/arch/arm64/boot/dts/apple/s8001.dtsi
+++ b/arch/arm64/boot/dts/apple/s8001.dtsi
@@ -32,19 +32,85 @@
 			compatible = "apple,twister";
 			reg = <0x0 0x0>;
 			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu1: cpu@1 {
 			compatible = "apple,twister";
 			reg = <0x0 0x1>;
 			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			operating-points-v2 = <&twister_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>;
 		};
 	};
 
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <800>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <53000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-level = <3>;
+			clock-latency-ns = <18000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1080000000>;
+			opp-level = <4>;
+			clock-latency-ns = <21000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-level = <5>;
+			clock-latency-ns = <25000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <6>;
+			clock-latency-ns = <33000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2160000000>;
+			opp-level = <7>;
+			clock-latency-ns = <45000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <2160000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+			turbo-mode;
+		};
+#endif
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -52,6 +118,12 @@
 		nonposted-mmio;
 		ranges;
 
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
 		serial0: serial@20a0c0000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x0a0c0000 0x0 0x4000>;
@@ -61,19 +133,86 @@
 			/* Use the bootloader-enabled clocks for now. */
 			clocks = <&clkref>, <&clkref>;
 			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		pmgr: power-management@20e000000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
 		aic: interrupt-controller@20e100000 {
 			compatible = "apple,s8000-aic", "apple,aic";
 			reg = <0x2 0x0e100000 0x0 0x100000>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+			power-domains = <&ps_aic>;
 		};
 
 		pinctrl_ap: pinctrl@20f100000 {
 			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -90,11 +229,32 @@
 				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(165, 1)>,
+					 <APPLE_PINMUX(164, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(178, 1)>,
+					 <APPLE_PINMUX(177, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(132, 1)>,
+					 <APPLE_PINMUX(131, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(115, 1)>,
+					 <APPLE_PINMUX(114, 1)>;
+			};
 		};
 
 		pinctrl_aop: pinctrl@2100f0000 {
 			compatible = "apple,s8000-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -113,6 +273,14 @@
 				     <AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
 		wdt: watchdog@2102b0000 {
 			compatible = "apple,s8000-wdt", "apple,wdt";
 			reg = <0x2 0x102b0000 0x0 0x4000>;
@@ -131,3 +299,5 @@
 			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
+
+#include "s8001-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/s8003.dtsi b/arch/arm64/boot/dts/apple/s8003.dtsi
index 7e4ad4f7e499..79df5c783260 100644
--- a/arch/arm64/boot/dts/apple/s8003.dtsi
+++ b/arch/arm64/boot/dts/apple/s8003.dtsi
@@ -4,18 +4,65 @@
  *
  * Other names: H8P, "Malta"
  *
- * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
  */
 
-#include "s8000.dtsi"
+#include "s800-0-3.dtsi"
+
+/ {
+	twister_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <45000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <4>;
+			clock-latency-ns = <25000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-level = <5>;
+			clock-latency-ns = <28000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <6>;
+			clock-latency-ns = <35000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-level = <7>;
+			clock-latency-ns = <38000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-level = <8>;
+			clock-latency-ns = <38000>;
+			turbo-mode;
+		};
+#endif
+	};
+};
 
 /*
  * The A9 was made by two separate fabs on two different process
  * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
- * the S8003 (APL1022) on 16nm. While they are seemingly the same,
- * they do have distinct part numbers and devices using them have
- * distinct model names. There are currently no known differences
- * between these as far as Linux is concerned, but let's keep things
- * structured properly to make it easier to alter the behaviour of
- * one of the chips if need be.
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
  */
diff --git a/arch/arm64/boot/dts/apple/s800x-6s.dtsi b/arch/arm64/boot/dts/apple/s800x-6s.dtsi
index 49b04db310c6..1dcf80cc2920 100644
--- a/arch/arm64/boot/dts/apple/s800x-6s.dtsi
+++ b/arch/arm64/boot/dts/apple/s800x-6s.dtsi
@@ -47,3 +47,7 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi b/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi
index 32570ed3cdf0..c1701e81f0c1 100644
--- a/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi
+++ b/arch/arm64/boot/dts/apple/s800x-ipad5.dtsi
@@ -41,3 +41,7 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
diff --git a/arch/arm64/boot/dts/apple/s800x-se.dtsi b/arch/arm64/boot/dts/apple/s800x-se.dtsi
index a1a5690e8371..deb7c7cc90f6 100644
--- a/arch/arm64/boot/dts/apple/s800x-se.dtsi
+++ b/arch/arm64/boot/dts/apple/s800x-se.dtsi
@@ -47,3 +47,7 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/spi1-nvram.dtsi b/arch/arm64/boot/dts/apple/spi1-nvram.dtsi
new file mode 100644
index 000000000000..9740fbf200f0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/spi1-nvram.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Devicetree include for common spi-nor nvram flash.
+//
+// Apple uses a consistent configiguration for the nvram on all known M1* and
+// M2* devices.
+//
+// Copyright The Asahi Linux Contributors
+
+/ {
+	aliases {
+		nvram = &nvram;
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nvram: partition@700000 {
+				label = "nvram";
+				/* To be filled by the loader */
+				reg = <0x0 0x0>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j314s.dts b/arch/arm64/boot/dts/apple/t6000-j314s.dts
index c9e192848fe3..1430b91ff1b1 100644
--- a/arch/arm64/boot/dts/apple/t6000-j314s.dts
+++ b/arch/arm64/boot/dts/apple/t6000-j314s.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j314s", "apple,t6000", "apple,arm-platform";
 	model = "Apple MacBook Pro (14-inch, M1 Pro, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,maldives";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,maldives";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j316s.dts b/arch/arm64/boot/dts/apple/t6000-j316s.dts
index ff1803ce2300..da0cbe7d9673 100644
--- a/arch/arm64/boot/dts/apple/t6000-j316s.dts
+++ b/arch/arm64/boot/dts/apple/t6000-j316s.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j316s", "apple,t6000", "apple,arm-platform";
 	model = "Apple MacBook Pro (16-inch, M1 Pro, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,madagascar";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,madagascar";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000.dtsi b/arch/arm64/boot/dts/apple/t6000.dtsi
index 89c3b211b116..0ad77c98073f 100644
--- a/arch/arm64/boot/dts/apple/t6000.dtsi
+++ b/arch/arm64/boot/dts/apple/t6000.dtsi
@@ -16,3 +16,7 @@
 };
 
 /delete-node/ &pmgr_south;
+
+&gpu {
+	compatible = "apple,agx-g13s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j314c.dts b/arch/arm64/boot/dts/apple/t6001-j314c.dts
index 1761d15b98c1..c37097dcfdb3 100644
--- a/arch/arm64/boot/dts/apple/t6001-j314c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j314c.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j314c", "apple,t6001", "apple,arm-platform";
 	model = "Apple MacBook Pro (14-inch, M1 Max, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,maldives";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,maldives";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j316c.dts b/arch/arm64/boot/dts/apple/t6001-j316c.dts
index 750e9beeffc0..3bc6e0c3294c 100644
--- a/arch/arm64/boot/dts/apple/t6001-j316c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j316c.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j316c", "apple,t6001", "apple,arm-platform";
 	model = "Apple MacBook Pro (16-inch, M1 Max, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,madagascar";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,madagascar";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j375c.dts b/arch/arm64/boot/dts/apple/t6001-j375c.dts
index 62ea437b58b2..2e7c23714d4d 100644
--- a/arch/arm64/boot/dts/apple/t6001-j375c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j375c.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j375c", "apple,t6001", "apple,arm-platform";
 	model = "Apple Mac Studio (M1 Max, 2022)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,okinawa";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,okinawa";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001.dtsi b/arch/arm64/boot/dts/apple/t6001.dtsi
index 620b17e4031f..ffbe823b71bc 100644
--- a/arch/arm64/boot/dts/apple/t6001.dtsi
+++ b/arch/arm64/boot/dts/apple/t6001.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 #include "multi-die-cpp.h"
 
@@ -61,3 +62,7 @@
 		};
 	};
 };
+
+&gpu {
+	compatible = "apple,agx-g13c", "apple,agx-g13s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6002-j375d.dts b/arch/arm64/boot/dts/apple/t6002-j375d.dts
index 3365429bdc8b..2b7f80119618 100644
--- a/arch/arm64/boot/dts/apple/t6002-j375d.dts
+++ b/arch/arm64/boot/dts/apple/t6002-j375d.dts
@@ -38,6 +38,14 @@
 	};
 };
 
+&wifi0 {
+	brcm,board-type = "apple,okinawa";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,okinawa";
+};
+
 /* delete unused always-on power-domains on die 1 */
 
 /delete-node/ &ps_atc2_usb_aon_die1;
diff --git a/arch/arm64/boot/dts/apple/t6002.dtsi b/arch/arm64/boot/dts/apple/t6002.dtsi
index a963a5011799..8fb648836b53 100644
--- a/arch/arm64/boot/dts/apple/t6002.dtsi
+++ b/arch/arm64/boot/dts/apple/t6002.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 #include "multi-die-cpp.h"
 
@@ -299,3 +300,7 @@
 	// On t6002, the die0 GPU power domain needs both AFR power domains
 	power-domains = <&ps_afr>, <&ps_afr_die1>;
 };
+
+&gpu {
+	compatible = "apple,agx-g13d", "apple,agx-g13s";
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-common.dtsi b/arch/arm64/boot/dts/apple/t600x-common.dtsi
index fa8ead699363..e20234ef2135 100644
--- a/arch/arm64/boot/dts/apple/t600x-common.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-common.dtsi
@@ -11,6 +11,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpu = &gpu;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -362,6 +366,13 @@
 		clock-output-names = "clkref";
 	};
 
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
 	/*
 	 * This is a fabulated representation of the input clock
 	 * to NCO since we don't know the true clock tree.
@@ -371,4 +382,34 @@
 		#clock-cells = <0>;
 		clock-output-names = "nco_ref";
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
index b1c875e692c8..3603b276a2ab 100644
--- a/arch/arm64/boot/dts/apple/t600x-die0.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -24,6 +24,41 @@
 		power-domains = <&ps_aic>;
 	};
 
+	smc: smc@290400000 {
+		compatible = "apple,t6000-smc", "apple,smc";
+		reg = <0x2 0x90400000 0x0 0x4000>,
+			<0x2 0x91e00000 0x0 0x100000>;
+		reg-names = "smc", "sram";
+		mboxes = <&smc_mbox>;
+
+		smc_gpio: gpio {
+			compatible = "apple,smc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		smc_reboot: reboot {
+			compatible = "apple,smc-reboot";
+			nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+				<&boot_error_count>, <&panic_count>;
+			nvmem-cell-names = "shutdown_flag", "boot_stage",
+				"boot_error_count", "panic_count";
+		};
+	};
+
+	smc_mbox: mbox@290408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x2 0x90408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 754 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 755 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 756 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 757 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
 	pinctrl_smc: pinctrl@290820000 {
 		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
 		reg = <0x2 0x90820000 0x0 0x4000>;
@@ -45,6 +80,63 @@
 				<AIC_IRQ 0 749 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	nub_spmi0: spmi@2920a1300 {
+		compatible = "apple,t6000-spmi", "apple,spmi";
+		reg = <0x2 0x920a1300 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pmic1: pmic@f {
+			compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
+			reg = <0xf SPMI_USID>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				pm_setting: pm-setting@1405 {
+					reg = <0x1405 0x1>;
+				};
+
+				rtc_offset: rtc-offset@1411 {
+					reg = <0x1411 0x6>;
+				};
+
+				boot_stage: boot-stage@6001 {
+					reg = <0x6001 0x1>;
+				};
+
+				boot_error_count: boot-error-count@6002,0 {
+					reg = <0x6002 0x1>;
+					bits = <0 4>;
+				};
+
+				panic_count: panic-count@6002,4 {
+					reg = <0x6002 0x1>;
+					bits = <4 4>;
+				};
+
+				boot_error_stage: boot-error-stage@6003 {
+					reg = <0x6003 0x1>;
+				};
+
+				shutdown_flag: shutdown-flag@600f,3 {
+					reg = <0x600f 0x1>;
+					bits = <3 1>;
+				};
+
+				fault_shadow: fault-shadow@867b {
+					reg = <0x867b 0x10>;
+				};
+
+				socd: socd@8b00 {
+					reg = <0x8b00 0x400>;
+				};
+			};
+		};
+	};
+
 	wdt: watchdog@2922b0000 {
 		compatible = "apple,t6000-wdt", "apple,wdt";
 		reg = <0x2 0x922b0000 0x0 0x4000>;
@@ -163,6 +255,34 @@
 		status = "disabled";
 	};
 
+	spi1: spi@39b104000 {
+		compatible = "apple,t6000-spi", "apple,spi";
+		reg = <0x3 0x9b104000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clk_200m>;
+		pinctrl-0 = <&spi1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi1>;
+		status = "disabled";
+	};
+
+	spi3: spi@39b10c000 {
+		compatible = "apple,t6000-spi", "apple,spi";
+		reg = <0x3 0x9b10c000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1109 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi3>;
+		status = "disabled";
+	};
+
 	serial0: serial@39b200000 {
 		compatible = "apple,s5l-uart";
 		reg = <0x3 0x9b200000 0x0 0x1000>;
@@ -217,6 +337,34 @@
 		#sound-dai-cells = <1>;
 	};
 
+	gpu: gpu@406400000 {
+		compatible = "apple,agx-g13s";
+		reg = <0x4 0x6400000 0 0x40000>,
+			<0x4 0x4000000 0 0x1000000>;
+		reg-names = "asc", "sgx";
+		mboxes = <&agx_mbox>;
+		power-domains = <&ps_gfx>;
+		memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+				<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+		memory-region-names = "ttbs", "pagetables", "handoff",
+				      "hw-cal-a", "hw-cal-b", "globals";
+
+		apple,firmware-abi = <0 0 0>;
+	};
+
+	agx_mbox: mbox@406408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x4 0x6408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1059 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1060 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1061 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1062 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
 	pcie0_dart_0: iommu@581008000 {
 		compatible = "apple,t6000-dart";
 		reg = <0x5 0x81008000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
index b31f1a7a2b3f..1a994c3c1b79 100644
--- a/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
@@ -36,6 +36,20 @@
 			<APPLE_PINMUX(101, 1)>;
 	};
 
+	spi1_pins: spi1-pins {
+		pinmux = <APPLE_PINMUX(10, 1)>,
+			<APPLE_PINMUX(11, 1)>,
+			<APPLE_PINMUX(32, 1)>,
+			<APPLE_PINMUX(33, 1)>;
+	};
+
+	spi3_pins: spi3-pins {
+		pinmux = <APPLE_PINMUX(52, 1)>,
+			<APPLE_PINMUX(53, 1)>,
+			<APPLE_PINMUX(54, 1)>,
+			<APPLE_PINMUX(55, 1)>;
+	};
+
 	pcie_pins: pcie-pins {
 		pinmux = <APPLE_PINMUX(0, 1)>,
 				<APPLE_PINMUX(1, 1)>,
diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
index 2e471dfe43cf..c0aac59a6fae 100644
--- a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
@@ -13,6 +13,7 @@
 
 / {
 	aliases {
+		bluetooth0 = &bluetooth0;
 		serial0 = &serial0;
 		wifi0 = &wifi0;
 	};
@@ -99,9 +100,18 @@
 	/* WLAN */
 	bus-range = <1 1>;
 	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
 	};
 };
 
@@ -119,3 +129,5 @@
 &fpwm0 {
 	status = "okay";
 };
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
index 1e5a19e49b08..c0fb93ae72f4 100644
--- a/arch/arm64/boot/dts/apple/t600x-j375.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
@@ -11,6 +11,8 @@
 
 / {
 	aliases {
+		bluetooth0 = &bluetooth0;
+		ethernet0 = &ethernet0;
 		serial0 = &serial0;
 		wifi0 = &wifi0;
 	};
@@ -84,9 +86,18 @@
 	/* WLAN */
 	bus-range = <1 1>;
 	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
 	};
 };
 
@@ -126,3 +137,5 @@
 &pcie0_dart_3 {
 	status = "okay";
 };
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t6020-j414s.dts b/arch/arm64/boot/dts/apple/t6020-j414s.dts
new file mode 100644
index 000000000000..631c54c5f03d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j414s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M2 Pro, 2023)
+ *
+ * target-type: J414s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j414s", "apple,t6020", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M2 Pro, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,tokara";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,tokara";
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j416s.dts b/arch/arm64/boot/dts/apple/t6020-j416s.dts
new file mode 100644
index 000000000000..c277ed5889a2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j416s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M2 Pro, 2023)
+ *
+ * target-type: J416s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j416s", "apple,t6020", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M2 Pro, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,amami";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,amami";
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j474s.dts b/arch/arm64/boot/dts/apple/t6020-j474s.dts
new file mode 100644
index 000000000000..7c7ad5b8ad18
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j474s.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac mini (M2 Pro, 2023)
+ *
+ * target-type: J474s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+
+/*
+ * This model is very similar to M1 and M2 Mac Studio models so base it on those
+ * and remove the missing SDHCI controller.
+ */
+
+#include "t602x-j474-j475.dtsi"
+
+/ {
+	compatible = "apple,j474s", "apple,t6020", "apple,arm-platform";
+	model = "Apple Mac mini (M2 Pro, 2023)";
+};
+
+/* PCIe devices */
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,tasmania";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,tasmania";
+};
+
+/*
+ * port01 is unused, remove the PCIe sdhci0 node from t600x-j375.dtsi and adjust
+ * the iommu-map.
+ */
+/delete-node/ &sdhci0;
+
+&pcie0 {
+	iommu-map = <0x100 &pcie0_dart_0 1 1>,
+			<0x200 &pcie0_dart_2 1 1>,
+			<0x300 &pcie0_dart_3 1 1>;
+};
diff --git a/arch/arm64/boot/dts/apple/t6020.dtsi b/arch/arm64/boot/dts/apple/t6020.dtsi
new file mode 100644
index 000000000000..bffa66a3ffff
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6020 "M2 Pro" SoC
+ *
+ * Other names: H14J, "Rhodes Chop"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* This chip is just a cut down version of t6021, so include it and disable the missing parts */
+
+#include "t6021.dtsi"
+
+/ {
+	compatible = "apple,t6020", "apple,arm-platform";
+};
+
+/delete-node/ &pmgr_south;
+
+&gpu {
+	compatible = "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j414c.dts b/arch/arm64/boot/dts/apple/t6021-j414c.dts
new file mode 100644
index 000000000000..cdcf0740714d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j414c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M2 Max, 2023)
+ *
+ * target-type: J414c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j414c", "apple,t6021", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M2 Max, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,tokara";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,tokara";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j416c.dts b/arch/arm64/boot/dts/apple/t6021-j416c.dts
new file mode 100644
index 000000000000..6d8146b94170
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j416c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M2 Max, 2022)
+ *
+ * target-type: J416c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j416c", "apple,t6021", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M2 Max, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,amami";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,amami";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j475c.dts b/arch/arm64/boot/dts/apple/t6021-j475c.dts
new file mode 100644
index 000000000000..533e35774874
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j475c.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M2 Max, 2023)
+ *
+ * target-type: J475c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j474-j475.dtsi"
+
+/ {
+	compatible = "apple,j475c", "apple,t6021", "apple,arm-platform";
+	model = "Apple Mac Studio (M2 Max, 2023)";
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,canary";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,canary";
+};
+
+/* enable PCIe port01 with SDHCI */
+&port01 {
+	status = "okay";
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021.dtsi b/arch/arm64/boot/dts/apple/t6021.dtsi
new file mode 100644
index 000000000000..62907ad6a546
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6021 "M2 Max" SoC
+ *
+ * Other names: H14J, "Rhodes"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t602x-common.dtsi"
+
+/ {
+	compatible = "apple,t6021", "apple,arm-platform";
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&{/soc} {
+	#include "t602x-die0.dtsi"
+	#include "t602x-dieX.dtsi"
+	#include "t602x-nvme.dtsi"
+};
+
+#include "t602x-gpio-pins.dtsi"
+#include "t602x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01 &cpu_e02 &cpu_e03>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
+		};
+	};
+};
+
+&gpu {
+	compatible = "apple,agx-g14c", "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6022-j180d.dts b/arch/arm64/boot/dts/apple/t6022-j180d.dts
new file mode 100644
index 000000000000..dca6bd167c22
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-j180d.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Pro (M2 Ultra, 2023)
+ *
+ * target-type: J180d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6022.dtsi"
+#include "t6022-jxxxd.dtsi"
+
+/ {
+	compatible = "apple,j180d", "apple,t6022", "apple,arm-platform";
+	model = "Apple Mac Pro (M2 Ultra, 2023)";
+	aliases {
+		nvram = &nvram;
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+			power-domains = <&ps_dispext0_cpu0_die1>, <&ps_dptx_phy_ps_die1>;
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C Rear */
+&i2c0 {
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* hpm4 and hpm5 included from t6022-jxxxd.dtsi */
+
+	hpm6: usb-pd@3d {
+		compatible = "apple,cd321x";
+		reg = <0x3d>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm7: usb-pd@3e {
+		compatible = "apple,cd321x";
+		reg = <0x3e>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/* USB Type C Front */
+&i2c3 {
+	status = "okay";
+
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/*
+ * Delete unused PCIe nodes, the Mac Pro uses slightly different PCIe
+ * controllers with a single port connected to a PM40100 PCIe switch
+ */
+/delete-node/ &pcie0;
+/delete-node/ &pcie0_dart_0;
+/delete-node/ &pcie0_dart_1;
+/delete-node/ &pcie0_dart_2;
+/delete-node/ &pcie0_dart_3;
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t6022-j475d.dts b/arch/arm64/boot/dts/apple/t6022-j475d.dts
new file mode 100644
index 000000000000..736594544f79
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-j475d.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M2 Ultra, 2023)
+ *
+ * target-type: J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6022.dtsi"
+#include "t602x-j474-j475.dtsi"
+#include "t6022-jxxxd.dtsi"
+
+/ {
+	compatible = "apple,j475d", "apple,t6022", "apple,arm-platform";
+	model = "Apple Mac Studio (M2 Ultra, 2023)";
+};
+
+&framebuffer0 {
+	power-domains = <&ps_dispext0_cpu0_die1>, <&ps_dptx_phy_ps_die1>;
+};
+
+/* enable PCIe port01 with SDHCI */
+&port01 {
+	status = "okay";
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,canary";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,canary";
+};
diff --git a/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi b/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi
new file mode 100644
index 000000000000..4f7bf2ebfe39
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Pro (M2 Ultra, 2023) and Mac Studio (M2 Ultra, 2023)
+ *
+ * This file contains the parts common to J180 and J475 devices with t6022.
+ *
+ * target-type: J180d / J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* delete power-domains for missing disp0 / disp0_die1 */
+/delete-node/ &ps_disp0_cpu0;
+/delete-node/ &ps_disp0_fe;
+
+/delete-node/ &ps_disp0_cpu0_die1;
+/delete-node/ &ps_disp0_fe_die1;
+
+/* USB Type C */
+&i2c0 {
+	/* front-right */
+	hpm4: usb-pd@39 {
+		compatible = "apple,cd321x";
+		reg = <0x39>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* front-left */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6022.dtsi b/arch/arm64/boot/dts/apple/t6022.dtsi
new file mode 100644
index 000000000000..e73bf2f7510a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022.dtsi
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6022 "M2 Ultra" SoC
+ *
+ * Other names: H14J, "Rhodes 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t602x-common.dtsi"
+
+/ {
+	compatible = "apple,t6022", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		cpu-map {
+			cluster3 {
+				core0 {
+					cpu = <&cpu_e10>;
+				};
+				core1 {
+					cpu = <&cpu_e11>;
+				};
+				core2 {
+					cpu = <&cpu_e12>;
+				};
+				core3 {
+					cpu = <&cpu_e13>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu_p20>;
+				};
+				core1 {
+					cpu = <&cpu_p21>;
+				};
+				core2 {
+					cpu = <&cpu_p22>;
+				};
+				core3 {
+					cpu = <&cpu_p23>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu_p30>;
+				};
+				core1 {
+					cpu = <&cpu_p31>;
+				};
+				core2 {
+					cpu = <&cpu_p32>;
+				};
+				core3 {
+					cpu = <&cpu_p33>;
+				};
+			};
+		};
+
+		cpu_e10: cpu@800 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x800>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e11: cpu@801 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x801>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e12: cpu@802 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x802>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e13: cpu@803 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x803>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_p20: cpu@10900 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10900>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p21: cpu@10901 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10901>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p22: cpu@10902 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10902>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p23: cpu@10903 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10903>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p30: cpu@10a00 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a00>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p31: cpu@10a01 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a01>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p32: cpu@10a02 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a02>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p33: cpu@10a03 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a03>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		l2_cache_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_4: l2-cache-4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+
+		l2_cache_5: l2-cache-5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	};
+
+	die0: soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x02 0x00000000 0x02 0x00000000 0x4 0x00000000>,
+			 <0x05 0x80000000 0x05 0x80000000 0x1 0x80000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0xf 0x80000000>,
+			 <0x16 0x80000000 0x16 0x80000000 0x5 0x80000000>;
+		nonposted-mmio;
+		/* Required to get >32-bit DMA via DARTs */
+		dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>;
+
+		// filled via templated includes at the end of the file
+	};
+
+	die1: soc@2200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x02 0x00000000 0x22 0x00000000 0x4 0x00000000>,
+			 <0x07 0x00000000 0x27 0x00000000 0xf 0x80000000>,
+			 <0x16 0x80000000 0x36 0x80000000 0x5 0x80000000>;
+		nonposted-mmio;
+		/* Required to get >32-bit DMA via DARTs */
+		dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&die0 {
+	#include "t602x-die0.dtsi"
+	#include "t602x-dieX.dtsi"
+};
+
+#include "t602x-pmgr.dtsi"
+#include "t602x-gpio-pins.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+#define DIE _die1
+#define DIE_NO 1
+
+&die1 {
+	#include "t602x-dieX.dtsi"
+	#include "t602x-nvme.dtsi"
+};
+
+#include "t602x-pmgr.dtsi"
+
+/delete-node/ &ps_pmp_die1;
+
+#undef DIE
+#undef DIE_NO
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01 &cpu_e02 &cpu_e03
+				&cpu_e10 &cpu_e11 &cpu_e12 &cpu_e13>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13
+				&cpu_p20 &cpu_p21 &cpu_p22 &cpu_p23
+				&cpu_p30 &cpu_p31 &cpu_p32 &cpu_p33>;
+		};
+	};
+};
+
+&ps_gfx {
+	// On t6022, the die0 GPU power domain needs both AFR power domains
+	power-domains = <&ps_afr>, <&ps_afr_die1>;
+};
+
+&gpu {
+	compatible = "apple,agx-g14d", "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-common.dtsi b/arch/arm64/boot/dts/apple/t602x-common.dtsi
new file mode 100644
index 000000000000..9c800a391e7e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-common.dtsi
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Nodes common to all T602x family SoCs (M2 Pro/Max/Ultra)
+ *
+ * Other names: H14J, "Rhodes Chop", "Rhodes", "Rhodes 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpu = &gpu;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e00>;
+				};
+				core1 {
+					cpu = <&cpu_e01>;
+				};
+				core2 {
+					cpu = <&cpu_e02>;
+				};
+				core3 {
+					cpu = <&cpu_e03>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p00>;
+				};
+				core1 {
+					cpu = <&cpu_p01>;
+				};
+				core2 {
+					cpu = <&cpu_p02>;
+				};
+				core3 {
+					cpu = <&cpu_p03>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu_p10>;
+				};
+				core1 {
+					cpu = <&cpu_p11>;
+				};
+				core2 {
+					cpu = <&cpu_p12>;
+				};
+				core3 {
+					cpu = <&cpu_p13>;
+				};
+			};
+		};
+
+		cpu_e00: cpu@0 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e01: cpu@1 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e02: cpu@2 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e03: cpu@3 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_p00: cpu@10100 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p01: cpu@10101 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p02: cpu@10102 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p03: cpu@10103 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p10: cpu@10200 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p11: cpu@10201 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p12: cpu@10202 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10202>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p13: cpu@10203 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10203>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+
+		l2_cache_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	 };
+
+	blizzard_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		/* pstate #1 is a dummy clone of #2 */
+		opp02 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <2>;
+			clock-latency-ns = <7700>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <3>;
+			clock-latency-ns = <25000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <4>;
+			clock-latency-ns = <33000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2004000000>;
+			opp-level = <5>;
+			clock-latency-ns = <38000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2256000000>;
+			opp-level = <6>;
+			clock-latency-ns = <44000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2424000000>;
+			opp-level = <7>;
+			clock-latency-ns = <48000>;
+		};
+	};
+
+	avalanche_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7400>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <948000000>;
+			opp-level = <2>;
+			clock-latency-ns = <18000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1188000000>;
+			opp-level = <3>;
+			clock-latency-ns = <21000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1452000000>;
+			opp-level = <4>;
+			clock-latency-ns = <24000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <5>;
+			clock-latency-ns = <28000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1968000000>;
+			opp-level = <6>;
+			clock-latency-ns = <31000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <7>;
+			clock-latency-ns = <33000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2568000000>;
+			opp-level = <9>;
+			clock-latency-ns = <47000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2724000000>;
+			opp-level = <10>;
+			clock-latency-ns = <50000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2868000000>;
+			opp-level = <11>;
+			clock-latency-ns = <52000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <3000000000>;
+			opp-level = <12>;
+			clock-latency-ns = <57000>;
+		};
+		opp13 {
+			opp-hz = /bits/ 64 <3132000000>;
+			opp-level = <13>;
+			clock-latency-ns = <60000>;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3264000000>;
+			opp-level = <14>;
+			clock-latency-ns = <64000>;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3360000000>;
+			opp-level = <15>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+		opp16 {
+			opp-hz = /bits/ 64 <3408000000>;
+			opp-level = <16>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+		opp17 {
+			opp-hz = /bits/ 64 <3504000000>;
+			opp-level = <17>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+	};
+
+	pmu-e {
+		compatible = "apple,blizzard-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,avalanche-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ 0 AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-die0.dtsi b/arch/arm64/boot/dts/apple/t602x-die0.dtsi
new file mode 100644
index 000000000000..2e7d2bf08ddc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-die0.dtsi
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on die 0 on the Apple T6022 "M2 Ultra" SoC and present on
+ * Apple T6020 / T6021 "M2 Pro" / "M2 Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	nco: clock-controller@28e03c000 {
+		compatible = "apple,t6020-nco", "apple,t8103-nco";
+		reg = <0x2 0x8e03c000 0x0 0x14000>;
+		clocks = <&nco_clkref>;
+		#clock-cells = <1>;
+	};
+
+	aic: interrupt-controller@28e100000 {
+		compatible = "apple,t6020-aic", "apple,aic2";
+		#interrupt-cells = <4>;
+		interrupt-controller;
+		reg = <0x2 0x8e100000 0x0 0xc000>,
+			<0x2 0x8e10c000 0x0 0x1000>;
+		reg-names = "core", "event";
+		power-domains = <&ps_aic>;
+	};
+
+	nub_spmi0: spmi@29e114000 {
+		compatible = "apple,t6020-spmi", "apple,t8103-spmi";
+		reg = <0x2 0x9e114000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pmic1: pmic@f {
+			compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
+			reg = <0xb SPMI_USID>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				pm_setting: pm-setting@1405 {
+					reg = <0x1405 0x1>;
+				};
+
+				rtc_offset: rtc-offset@1411 {
+					reg = <0x1411 0x6>;
+				};
+
+				boot_stage: boot-stage@6001 {
+					reg = <0x6001 0x1>;
+				};
+
+				boot_error_count: boot-error-count@6002,0 {
+					reg = <0x6002 0x1>;
+					bits = <0 4>;
+				};
+
+				panic_count: panic-count@6002,4 {
+					reg = <0x6002 0x1>;
+					bits = <4 4>;
+				};
+
+				boot_error_stage: boot-error-stage@6003 {
+					reg = <0x6003 0x1>;
+				};
+
+				shutdown_flag: shutdown-flag@600f,3 {
+					reg = <0x600f 0x1>;
+					bits = <3 1>;
+				};
+
+				fault_shadow: fault-shadow@867b {
+					reg = <0x867b 0x10>;
+				};
+
+				socd: socd@8b00 {
+					reg = <0x8b00 0x400>;
+				};
+			};
+		};
+	};
+
+	wdt: watchdog@29e2c4000 {
+		compatible = "apple,t6020-wdt", "apple,t8103-wdt";
+		reg = <0x2 0x9e2c4000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 719 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	smc_mbox: mbox@2a2408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x2 0xa2408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 862 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 863 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 864 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 865 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
+	smc: smc@2a2400000 {
+		compatible = "apple,t6020-smc", "apple,t8103-smc";
+		reg = <0x2 0xa2400000 0x0 0x4000>,
+			<0x2 0xa3e00000 0x0 0x100000>;
+		reg-names = "smc", "sram";
+		mboxes = <&smc_mbox>;
+
+		smc_gpio: gpio {
+			compatible = "apple,smc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		smc_reboot: reboot {
+			compatible = "apple,smc-reboot";
+			nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+				<&boot_error_count>, <&panic_count>;
+			nvmem-cell-names = "shutdown_flag", "boot_stage",
+				"boot_error_count", "panic_count";
+		};
+	};
+
+	pinctrl_smc: pinctrl@2a2820000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0xa2820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_smc 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 851 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 852 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 853 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 854 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 855 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 856 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 857 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sio_dart: iommu@39b008000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x3 0x9b008000 0x0 0x8000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1231 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	fpwm0: pwm@39b030000 {
+		compatible = "apple,t6020-fpwm", "apple,s5l-fpwm";
+		reg = <0x3 0x9b030000 0x0 0x4000>;
+		power-domains = <&ps_fpwm0>;
+		clocks = <&clkref>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@39b040000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b040000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1219 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c0_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+	};
+
+	i2c1: i2c@39b044000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b044000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1220 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c1>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@39b048000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b048000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1221 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c2>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@39b04c000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b04c000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1222 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c3>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@39b050000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b050000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1223 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c4>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1224 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c5_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c5>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1225 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c6_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c6>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1226 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c7_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c7>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1227 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c8_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c8>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	spi1: spi@39b104000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b104000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clk_200m>;
+		pinctrl-0 = <&spi1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi1>;
+		status = "disabled";
+	};
+
+	spi2: spi@39b108000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b108000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1207 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi2>;
+		status = "disabled";
+	};
+
+	spi4: spi@39b110000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b110000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1209 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi4>;
+		status = "disabled";
+	};
+
+	serial0: serial@39b200000 {
+		compatible = "apple,s5l-uart";
+		reg = <0x3 0x9b200000 0x0 0x4000>;
+		reg-io-width = <4>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1198 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * TODO: figure out the clocking properly, there may
+		 * be a third selectable clock.
+		 */
+		clocks = <&clkref>, <&clkref>;
+		clock-names = "uart", "clk_uart_baud0";
+		power-domains = <&ps_uart0>;
+		status = "disabled";
+	};
+
+	admac: dma-controller@39b400000 {
+		compatible = "apple,t6020-admac", "apple,t8103-admac";
+		reg = <0x3 0x9b400000 0x0 0x34000>;
+		#dma-cells = <1>;
+		dma-channels = <16>;
+		interrupts-extended = <0>,
+				      <&aic AIC_IRQ 0 1218 IRQ_TYPE_LEVEL_HIGH>,
+				      <0>,
+				      <0>;
+		iommus = <&sio_dart 2>;
+		power-domains = <&ps_sio_adma>;
+		resets = <&ps_audio_p>;
+	};
+
+	mca: mca@39b600000 {
+		compatible = "apple,t6020-mca", "apple,t8103-mca";
+		reg = <0x3 0x9b600000 0x0 0x10000>,
+		      <0x3 0x9b500000 0x0 0x20000>;
+		clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+		dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+		       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+		       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+		       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+		dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+			    "tx1a", "rx1a", "tx1b", "rx1b",
+			    "tx2a", "rx2a", "tx2b", "rx2b",
+			    "tx3a", "rx3a", "tx3b", "rx3b";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1211 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1212 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1213 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1214 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+				<&ps_mca2>, <&ps_mca3>;
+		resets = <&ps_audio_p>;
+		#sound-dai-cells = <1>;
+	};
+
+	gpu: gpu@406400000 {
+		compatible = "apple,agx-g14s";
+		reg = <0x4 0x6400000 0 0x40000>,
+			<0x4 0x4000000 0 0x1000000>;
+		reg-names = "asc", "sgx";
+		mboxes = <&agx_mbox>;
+		power-domains = <&ps_gfx>;
+		memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+				<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+		memory-region-names = "ttbs", "pagetables", "handoff",
+				      "hw-cal-a", "hw-cal-b", "globals";
+
+		apple,firmware-abi = <0 0 0>;
+	};
+
+	agx_mbox: mbox@406408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x4 0x6408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1143 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1144 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1145 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
+	pcie0: pcie@580000000 {
+		compatible = "apple,t6020-pcie";
+		device_type = "pci";
+
+		reg = <0x5 0x80000000 0x0 0x1000000>,	/* config */
+			<0x5 0x91000000 0x0 0x4000>,	/* rc */
+			<0x5 0x94008000 0x0 0x4000>,	/* port0 */
+			<0x5 0x95008000 0x0 0x4000>,	/* port1 */
+			<0x5 0x96008000 0x0 0x4000>,	/* port2 */
+			<0x5 0x97008000 0x0 0x4000>,	/* port3 */
+			<0x5 0x9e00c000 0x0 0x4000>,	/* phy0 */
+			<0x5 0x9e010000 0x0 0x4000>,	/* phy1 */
+			<0x5 0x9e014000 0x0 0x4000>,	/* phy2 */
+			<0x5 0x9e018000 0x0 0x4000>;	/* phy3 */
+		reg-names = "config", "rc",
+			"port0", "port1", "port2", "port3",
+			"phy0", "phy1", "phy2", "phy3";
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1340 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1344 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1348 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1352 IRQ_TYPE_LEVEL_HIGH>;
+
+		msi-controller;
+		msi-parent = <&pcie0>;
+		msi-ranges = <&aic AIC_IRQ 0 1672 IRQ_TYPE_EDGE_RISING 32>;
+
+		iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				<0x200 &pcie0_dart_1 1 1>,
+				<0x300 &pcie0_dart_2 1 1>,
+				<0x400 &pcie0_dart_3 1 1>;
+		iommu-map-mask = <0xff00>;
+
+		bus-range = <0 4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
+				<0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
+
+		power-domains = <&ps_apcie_gp_sys>;
+		pinctrl-0 = <&pcie_pins>;
+		pinctrl-names = "default";
+
+		port00: pci@0,0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+					<0 0 0 2 &port00 0 0 0 1>,
+					<0 0 0 3 &port00 0 0 0 2>,
+					<0 0 0 4 &port00 0 0 0 3>;
+		};
+
+		port01: pci@1,0 {
+			device_type = "pci";
+			reg = <0x800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+					<0 0 0 2 &port01 0 0 0 1>,
+					<0 0 0 3 &port01 0 0 0 2>,
+					<0 0 0 4 &port01 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port02: pci@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+					<0 0 0 2 &port02 0 0 0 1>,
+					<0 0 0 3 &port02 0 0 0 2>,
+					<0 0 0 4 &port02 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port03: pci@3,0 {
+			device_type = "pci";
+			reg = <0x1800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+					<0 0 0 2 &port03 0 0 0 1>,
+					<0 0 0 3 &port03 0 0 0 2>,
+					<0 0 0 4 &port03 0 0 0 3>;
+			status = "disabled";
+		};
+	};
+
+	pcie0_dart_0: iommu@594000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x94000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1341 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_1: iommu@595000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x95000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1345 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_2: iommu@596000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x96000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1349 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_3: iommu@597000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x97000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1353 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-dieX.dtsi b/arch/arm64/boot/dts/apple/t602x-dieX.dtsi
new file mode 100644
index 000000000000..cb07fd82b32e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-dieX.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Nodes present on both dies of T6022 (M2 Ultra) and present on M2 Pro/Max.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(cpufreq_e): cpufreq@210e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x10e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p0): cpufreq@211e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x11e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p1): cpufreq@212e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x12e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(pmgr): power-management@28e080000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e080000 0 0x8000>;
+	};
+
+	DIE_NODE(pmgr_south): power-management@28e680000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e680000 0 0x8000>;
+	};
+
+	DIE_NODE(pmgr_east): power-management@290280000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x90280000 0 0xc000>;
+	};
+
+	DIE_NODE(pinctrl_nub): pinctrl@29e1f0000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0x9e1f0000 0x0 0x4000>;
+		power-domains = <&DIE_NODE(ps_nub_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_nub) 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 711 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 712 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 713 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 714 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 715 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 716 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 717 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pmgr_mini): power-management@29e280000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x9e280000 0 0x4000>;
+	};
+
+	DIE_NODE(pinctrl_aop): pinctrl@2a6820000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0xa6820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_aop) 0 0 72>;
+		apple,npins = <72>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 598 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 599 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 600 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 601 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 602 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 603 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 604 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pinctrl_ap): pinctrl@39b028000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x3 0x9b028000 0x0 0x4000>;
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 458 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 459 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 460 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 461 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 462 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 463 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 464 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clkref>;
+		power-domains = <&DIE_NODE(ps_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_ap) 0 0 255>;
+		apple,npins = <255>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	DIE_NODE(pmgr_gfx): power-management@404e80000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		reg = <0x4 0x4e80000 0 0x4000>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi
new file mode 100644
index 000000000000..e41b6475f792
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * GPIO pin mappings for Apple T602x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&pinctrl_ap {
+	i2c0_pins: i2c0-pins {
+		pinmux = <APPLE_PINMUX(63, 1)>,
+			<APPLE_PINMUX(64, 1)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <APPLE_PINMUX(65, 1)>,
+			<APPLE_PINMUX(66, 1)>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinmux = <APPLE_PINMUX(67, 1)>,
+			<APPLE_PINMUX(68, 1)>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		pinmux = <APPLE_PINMUX(69, 1)>,
+			<APPLE_PINMUX(70, 1)>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		pinmux = <APPLE_PINMUX(71, 1)>,
+			<APPLE_PINMUX(72, 1)>;
+	};
+
+	i2c5_pins: i2c5-pins {
+		pinmux = <APPLE_PINMUX(73, 1)>,
+			<APPLE_PINMUX(74, 1)>;
+	};
+
+	i2c6_pins: i2c6-pins {
+		pinmux = <APPLE_PINMUX(75, 1)>,
+			<APPLE_PINMUX(76, 1)>;
+	};
+
+	i2c7_pins: i2c7-pins {
+		pinmux = <APPLE_PINMUX(77, 1)>,
+			<APPLE_PINMUX(78, 1)>;
+	};
+
+	i2c8_pins: i2c8-pins {
+		pinmux = <APPLE_PINMUX(79, 1)>,
+			<APPLE_PINMUX(80, 1)>;
+	};
+
+	spi1_pins: spi1-pins {
+		pinmux = <APPLE_PINMUX(155, 1)>, /* SDI */
+			<APPLE_PINMUX(156, 1)>,  /* SDO */
+			<APPLE_PINMUX(157, 1)>,  /* SCK */
+			<APPLE_PINMUX(158, 1)>;  /* CS */
+	};
+
+	spi2_pins: spi2-pins {
+		pinmux = <APPLE_PINMUX(159, 1)>, /* SDI */
+			<APPLE_PINMUX(160, 1)>,  /* SDO */
+			<APPLE_PINMUX(161, 1)>,  /* SCK */
+			<APPLE_PINMUX(162, 1)>;  /* CS */
+	};
+
+	spi4_pins: spi4-pins {
+		pinmux = <APPLE_PINMUX(167, 1)>, /* SDI */
+			<APPLE_PINMUX(168, 1)>,  /* SDO */
+			<APPLE_PINMUX(169, 1)>,  /* SCK */
+			<APPLE_PINMUX(170, 1)>;  /* CS */
+	};
+
+	pcie_pins: pcie-pins {
+		pinmux = <APPLE_PINMUX(0, 1)>,
+				<APPLE_PINMUX(1, 1)>,
+				<APPLE_PINMUX(2, 1)>,
+				<APPLE_PINMUX(3, 1)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi b/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi
new file mode 100644
index 000000000000..0e806d8ddf81
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14/16-inch, 2022)
+ *
+ * This file contains the parts common to J414 and J416 devices with both t6020 and t6021.
+ *
+ * target-type: J414s / J414c / J416s / J416c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/*
+ * These models are essentially identical to the previous generation, other than
+ * the GPIO indices.
+ */
+
+#include "t600x-j314-j316.dtsi"
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_cpu0>, <&ps_dptx_phy_ps>;
+};
+
+&hpm0 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm1 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm2 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm5 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi b/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi
new file mode 100644
index 000000000000..ee12fea5b12c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac mini (M2 Pro, 2023) and Mac Studio (2023)
+ *
+ * This file contains the parts common to J474 and J475 devices with t6020,
+ * t6021 and t6022.
+ *
+ * target-type: J474s / J475c / J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/*
+ * These models are very similar to the previous generation Mac Studio, other
+ * than GPIO indices.
+ */
+
+#include "t600x-j375.dtsi"
+
+&framebuffer0 {
+	power-domains = <&ps_dispext0_cpu0>, <&ps_dptx_phy_ps>;
+};
+
+&hpm0 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm1 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm2 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm3  {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-nvme.dtsi b/arch/arm64/boot/dts/apple/t602x-nvme.dtsi
new file mode 100644
index 000000000000..590cec8ac804
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-nvme.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * NVMe related devices for Apple T602x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(ans_mbox): mbox@347408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x3 0x47408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 1169 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1170 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1171 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		power-domains = <&DIE_NODE(ps_ans2)>;
+		#mbox-cells = <0>;
+	};
+
+	DIE_NODE(sart): sart@34bc50000 {
+		compatible = "apple,t6020-sart", "apple,t6000-sart";
+		reg = <0x3 0x4bc50000 0x0 0x10000>;
+		power-domains = <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(nvme): nvme@34bcc0000 {
+		compatible = "apple,t6020-nvme-ans2", "apple,t8103-nvme-ans2";
+		reg = <0x3 0x4bcc0000 0x0 0x40000>, <0x3 0x47400000 0x0 0x4000>;
+		reg-names = "nvme", "ans";
+		interrupt-parent = <&aic>;
+		/* The NVME interrupt is always routed to die 0 */
+		interrupts = <AIC_IRQ 0 1832 IRQ_TYPE_LEVEL_HIGH>;
+		mboxes = <&DIE_NODE(ans_mbox)>;
+		apple,sart = <&DIE_NODE(sart)>;
+		power-domains = <&DIE_NODE(ps_ans2)>,
+			<&DIE_NODE(ps_apcie_st_sys)>,
+			<&DIE_NODE(ps_apcie_st1_sys)>;
+		power-domain-names = "ans", "apcie0", "apcie1";
+		resets = <&DIE_NODE(ps_ans2)>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi b/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi
new file mode 100644
index 000000000000..f5382a2faf0b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi
@@ -0,0 +1,2265 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for Apple T602x "M2 Pro/Max/Ultra" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&DIE_NODE(pmgr) {
+	DIE_NODE(ps_afi): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afi);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_aic): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aic);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_dwi): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dwi);
+	};
+
+	DIE_NODE(ps_pms): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_gpio): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpio);
+		power-domains = <&DIE_NODE(ps_sio)>, <&DIE_NODE(ps_pms)>;
+	};
+
+	DIE_NODE(ps_soc_dpe): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(soc_dpe);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pms_c1ppt): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_c1ppt);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pmgr_soc_ocla): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmgr_soc_ocla);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_amcc0): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc0);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc2): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc2);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_00): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_00);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_01): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_01);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_02): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_02);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_03): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_03);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_08): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_08);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_09): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_09);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_10): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_10);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_11): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_11);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc1_ioa): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afc): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afc);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afnc0_ioa): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc1_ls): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc0_ls): power-controller@1f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw0): power-controller@200 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw1): power-controller@208 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw2): power-controller@210 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw2);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc0_lw0): power-controller@218 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ls)>;
+	};
+
+	DIE_NODE(ps_scodec): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(scodec);
+		power-domains = <&DIE_NODE(ps_afnc1_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_common): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc1_common): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc2_common): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc3_common): power-controller@240 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_dispext1_sys): power-controller@248 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_sys);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>;
+	};
+
+	DIE_NODE(ps_pms_bridge): power-controller@250 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_bridge);
+		apple,always-on; /* Core device */
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext0_sys): power-controller@258 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_ane_sys): power-controller@260 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_avd_sys): power-controller@268 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(avd_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_cio): power-controller@270 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc0_pcie): power-controller@278 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_cio): power-controller@280 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc1_pcie): power-controller@288 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_cio): power-controller@290 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc2_pcie): power-controller@298 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_cio): power-controller@2a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_atc3_pcie): power-controller@2a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_dispext1_fe): power-controller@2b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_fe);
+		power-domains = <&DIE_NODE(ps_dispext1_sys)>;
+	};
+
+	DIE_NODE(ps_dispext1_cpu0): power-controller@2b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext1_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_dispext0_fe): power-controller@2c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_fe);
+		power-domains = <&DIE_NODE(ps_dispext0_sys)>;
+	};
+
+	DIE_NODE(ps_pmp): power-controller@2c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmp);
+	};
+
+	DIE_NODE(ps_pms_sram): power-controller@2d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_sram);
+	};
+
+	DIE_NODE(ps_dispext0_cpu0): power-controller@2d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext0_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_ane_cpu): power-controller@2e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_cpu);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_pcie): power-controller@2e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_usb): power-controller@2f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_pcie): power-controller@2f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_usb): power-controller@300 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_pcie): power-controller@308 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_usb): power-controller@310 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_pcie): power-controller@318 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_usb): power-controller@320 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_trace_fab): power-controller@390 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(trace_fab);
+	};
+
+	DIE_NODE(ps_ane_sys_mpm): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys_mpm);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_ane_td): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_td);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_ane_base): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_base);
+		power-domains = <&DIE_NODE(ps_ane_td)>;
+	};
+
+	DIE_NODE(ps_ane_set1): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set1);
+		power-domains = <&DIE_NODE(ps_ane_base)>;
+	};
+
+	DIE_NODE(ps_ane_set2): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set2);
+		power-domains = <&DIE_NODE(ps_ane_set1)>;
+	};
+
+	DIE_NODE(ps_ane_set3): power-controller@4028 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set3);
+		power-domains = <&DIE_NODE(ps_ane_set2)>;
+	};
+
+	DIE_NODE(ps_ane_set4): power-controller@4030 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set4);
+		power-domains = <&DIE_NODE(ps_ane_set3)>;
+	};
+};
+
+&DIE_NODE(pmgr_south) {
+	DIE_NODE(ps_amcc4): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc4);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc5): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc5);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc6): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc6);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc7): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc7);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_dcs_16): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_16);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_17): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_17);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_18): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_18);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_19): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_19);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_20): power-controller@140 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_20);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_21): power-controller@148 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_21);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_22): power-controller@150 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_22);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_23): power-controller@158 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_23);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_24): power-controller@160 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_24);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_25): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_25);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_26): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_26);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_27): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_27);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_28): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_28);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_29): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_29);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_30): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_30);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_31): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_31);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc4_ioa): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc4_ls): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc4_lw0): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ls)>;
+	};
+
+	DIE_NODE(ps_afnc5_ioa): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc5_ls): power-controller@1c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc5_lw0): power-controller@1c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ls)>;
+	};
+
+	DIE_NODE(ps_dispext2_sys): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_sys);
+	};
+
+	DIE_NODE(ps_msr1): power-controller@1d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1);
+	};
+
+	DIE_NODE(ps_dispext2_fe): power-controller@1e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_fe);
+		power-domains = <&DIE_NODE(ps_dispext2_sys)>;
+	};
+
+	DIE_NODE(ps_dispext2_cpu0): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext2_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_msr1_ase_core): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1_ase_core);
+		power-domains = <&DIE_NODE(ps_msr1)>;
+	};
+
+	DIE_NODE(ps_dispext3_sys): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_sys);
+	};
+
+	DIE_NODE(ps_venc1_sys): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_sys);
+	};
+
+	DIE_NODE(ps_dispext3_fe): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_fe);
+		power-domains = <&DIE_NODE(ps_dispext3_sys)>;
+	};
+
+	DIE_NODE(ps_dispext3_cpu0): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext3_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_venc1_dma): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_dma);
+		power-domains = <&DIE_NODE(ps_venc1_sys)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe4): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe4);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe5): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe5);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_me0): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me0);
+		power-domains = <&DIE_NODE(ps_venc1_pipe5)>, <&DIE_NODE(ps_venc1_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc1_me1): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me1);
+		power-domains = <&DIE_NODE(ps_venc1_me0)>;
+	};
+};
+
+&DIE_NODE(pmgr_east) {
+	DIE_NODE(ps_clvr_spmi0): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi0);
+		apple,always-on; /* PCPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi1): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi1);
+		apple,always-on; /* GPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi2): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi2);
+		apple,always-on; /* ANE, fabric, AFR voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi3): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi3);
+		apple,always-on; /* Additional voltage regulator, probably used on T6021 (SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi4): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi4);
+		apple,always-on; /* Additional voltage regulator, probably used on T6021 (SMC) */
+	};
+
+	DIE_NODE(ps_ispsens0): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens0);
+	};
+
+	DIE_NODE(ps_ispsens1): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens1);
+	};
+
+	DIE_NODE(ps_ispsens2): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens2);
+	};
+
+	DIE_NODE(ps_ispsens3): power-controller@140 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens3);
+	};
+
+	DIE_NODE(ps_afnc6_ioa): power-controller@148 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc6_ls): power-controller@150 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc6_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc6_lw0): power-controller@158 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc6_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_ioa): power-controller@160 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_dcs_10)>;
+	};
+
+	DIE_NODE(ps_afnc2_ls): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw0): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw1): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw1);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc3_ioa): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc3_ls): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc3_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc3_lw0): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc3_ls)>;
+	};
+
+	DIE_NODE(ps_apcie_gp): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_apcie_st): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_ans2): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ans2);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_disp0_sys): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_jpg): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(jpg);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_sio): power-controller@1c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_isp_sys): power-controller@1c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+		status = "disabled";
+	};
+
+	DIE_NODE(ps_disp0_fe): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_fe);
+		power-domains = <&DIE_NODE(ps_disp0_sys)>;
+	};
+
+	DIE_NODE(ps_disp0_cpu0): power-controller@1d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_cpu0);
+		power-domains = <&DIE_NODE(ps_disp0_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_sio_cpu): power-controller@1e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_cpu);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm0): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm1): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm2): power-controller@1f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c0): power-controller@200 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c1): power-controller@208 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c2): power-controller@210 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c3): power-controller@218 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c3);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c4): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c4);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c5): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c5);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c6): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c6);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c7): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c7);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c8): power-controller@240 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c8);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi_p): power-controller@248 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi0): power-controller@250 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi1): power-controller@258 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi2): power-controller@260 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_p): power-controller@268 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_audio_p): power-controller@270 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(audio_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_adma): power-controller@278 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_adma);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_aes): power-controller@280 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aes);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_dptx_phy_ps): power-controller@288 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dptx_phy_ps);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi0): power-controller@2d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi0);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi1): power-controller@2e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi1);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi2): power-controller@2e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi2);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi3): power-controller@2f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi3);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi4): power-controller@2f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi4);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi5): power-controller@300 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi5);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_uart_n): power-controller@308 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_n);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart0): power-controller@310 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart0);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_amcc1): power-controller@318 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc1);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc3): power-controller@320 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc3);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_dcs_04): power-controller@328 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_04);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_05): power-controller@330 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_05);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_06): power-controller@338 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_06);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_07): power-controller@340 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_07);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_12): power-controller@348 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_12);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_13): power-controller@350 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_13);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_14): power-controller@358 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_14);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_15): power-controller@360 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_15);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_uart1): power-controller@368 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart1);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart2): power-controller@370 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart2);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart3): power-controller@378 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart3);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart4): power-controller@380 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart4);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart5): power-controller@388 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart5);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart6): power-controller@390 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart6);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_mca0): power-controller@398 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca0);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca1): power-controller@3a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca1);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca2): power-controller@3a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca2);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca3): power-controller@3b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca3);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_dpa0): power-controller@3b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa0);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa1): power-controller@3c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa1);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa2): power-controller@3c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa2);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa3): power-controller@3d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa3);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_msr0): power-controller@3d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0);
+	};
+
+	DIE_NODE(ps_venc_sys): power-controller@3e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_sys);
+	};
+
+	DIE_NODE(ps_dpa4): power-controller@3e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa4);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_msr0_ase_core): power-controller@3f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0_ase_core);
+		power-domains = <&DIE_NODE(ps_msr0)>;
+	};
+
+	DIE_NODE(ps_apcie_gpshr_sys): power-controller@3f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gpshr_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gp)>;
+	};
+
+	DIE_NODE(ps_apcie_st_sys): power-controller@408 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_apcie_st1_sys): power-controller@410 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st1_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st_sys)>;
+	};
+
+	DIE_NODE(ps_apcie_gp_sys): power-controller@418 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gpshr_sys)>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	DIE_NODE(ps_apcie_ge_sys): power-controller@420 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_ge_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gpshr_sys)>;
+	};
+
+	DIE_NODE(ps_apcie_phy_sw): power-controller@428 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_phy_sw);
+		apple,always-on; /* macOS does not turn this off */
+	};
+
+	DIE_NODE(ps_sep): power-controller@c00 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sep);
+		apple,always-on; /* Locked on */
+	};
+
+	/* There is a dependency tree involved with these PDs,
+	 * but we do not express it here since the ISP driver
+	 * is supposed to sequence them in the right order anyway.
+	 *
+	 * This also works around spurious parent PD activation
+	 * on machines with ISP disabled (desktops), so we don't
+	 * have to enable/disable everything in the per-model DTs.
+	 */
+	DIE_NODE(ps_isp_cpu): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_cpu);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_isp_fe): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_fe);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_dprx): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dprx);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_isp_vis): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_vis);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_be): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_be);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_raw): power-controller@4028 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_raw);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_clr): power-controller@4030 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_clr);
+		/* power-domains = <&DIE_NODE(ps_isp_be)>; */
+	};
+
+	DIE_NODE(ps_venc_dma): power-controller@8000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_dma);
+		power-domains = <&DIE_NODE(ps_venc_sys)>;
+	};
+
+	DIE_NODE(ps_venc_pipe4): power-controller@8008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe4);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_pipe5): power-controller@8010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe5);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_me0): power-controller@8018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me0);
+		power-domains = <&DIE_NODE(ps_venc_pipe5)>, <&DIE_NODE(ps_venc_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc_me1): power-controller@8020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me1);
+		power-domains = <&DIE_NODE(ps_venc_me0)>;
+	};
+
+	DIE_NODE(ps_prores): power-controller@c000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(prores);
+		power-domains = <&DIE_NODE(ps_afnc3_lw0)>;
+	};
+};
+
+&DIE_NODE(pmgr_mini) {
+	DIE_NODE(ps_debug): power-controller@58 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi0): power-controller@60 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi0);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi1): power-controller@68 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi1);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_aon): power-controller@70 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_aon);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_msg): power-controller@78 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msg);
+		apple,always-on; /* Core AON device? */
+	};
+
+	DIE_NODE(ps_nub_gpio): power-controller@80 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_gpio);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_fabric): power-controller@88 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_fabric);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb_aon): power-controller@90 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc1_usb_aon): power-controller@98 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc2_usb_aon): power-controller@a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc3_usb_aon): power-controller@a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_mtp_fabric): power-controller@b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_fabric);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_nub_fabric)>;
+		status = "disabled";
+	};
+
+	DIE_NODE(ps_nub_sram): power-controller@b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_sram);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_debug_switch): power-controller@c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_switch);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb): power-controller@c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_usb): power-controller@d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xd0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_usb): power-controller@d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xd8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_usb): power-controller@e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xe0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+#if 0
+	/* MTP stuff is self-managed */
+	DIE_NODE(ps_mtp_gpio): power-controller@e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xe8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_gpio);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_base): power-controller@f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xf0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_base);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_periph): power-controller@f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xf8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_periph);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_spi0): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_spi0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_i2cm0): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_i2cm0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_uart0): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_uart0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_cpu): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_cpu);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_scm_fabric): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_scm_fabric);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_periph)>;
+	};
+
+	DIE_NODE(ps_mtp_sram): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_sram);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_scm_fabric)>, <&DIE_NODE(ps_mtp_cpu)>;
+	};
+
+	DIE_NODE(ps_mtp_dma): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_dma);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_sram)>;
+	};
+#endif
+};
+
+&DIE_NODE(pmgr_gfx) {
+	DIE_NODE(ps_gpx): power-controller@0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpx);
+		apple,min-state = <4>;
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_afr): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afr);
+		/* Apple Fabric, media stuff: this can power down */
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_gfx): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gfx);
+		power-domains = <&DIE_NODE(ps_afr)>, <&DIE_NODE(ps_gpx)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-6.dtsi b/arch/arm64/boot/dts/apple/t7000-6.dtsi
index f60ea4a4a387..7048d7383982 100644
--- a/arch/arm64/boot/dts/apple/t7000-6.dtsi
+++ b/arch/arm64/boot/dts/apple/t7000-6.dtsi
@@ -48,3 +48,11 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
+
+&typhoon_opp06 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-handheld.dtsi b/arch/arm64/boot/dts/apple/t7000-handheld.dtsi
index 8984c9ec6cc8..7b58aa648b53 100644
--- a/arch/arm64/boot/dts/apple/t7000-handheld.dtsi
+++ b/arch/arm64/boot/dts/apple/t7000-handheld.dtsi
@@ -22,6 +22,10 @@
 	};
 };
 
+&dwi_bl {
+	status = "okay";
+};
+
 &serial0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/apple/t7000-j42d.dts b/arch/arm64/boot/dts/apple/t7000-j42d.dts
index 2231db6a739d..2ec9e06cc63f 100644
--- a/arch/arm64/boot/dts/apple/t7000-j42d.dts
+++ b/arch/arm64/boot/dts/apple/t7000-j42d.dts
@@ -20,6 +20,7 @@
 		framebuffer0: framebuffer@0 {
 			compatible = "apple,simple-framebuffer", "simple-framebuffer";
 			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0 &ps_dp>;
 			/* Format properties will be added by loader */
 			status = "disabled";
 		};
@@ -29,3 +30,7 @@
 &serial6 {
 	status = "okay";
 };
+
+&typhoon_opp06 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-mini4.dtsi b/arch/arm64/boot/dts/apple/t7000-mini4.dtsi
index c64ddc402fda..cc235c5a0c43 100644
--- a/arch/arm64/boot/dts/apple/t7000-mini4.dtsi
+++ b/arch/arm64/boot/dts/apple/t7000-mini4.dtsi
@@ -49,3 +49,15 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_dp>;
+};
+
+&typhoon_opp06 {
+	status = "okay";
+};
+
+&typhoon_opp07 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-n102.dts b/arch/arm64/boot/dts/apple/t7000-n102.dts
index 9c55d339ba4e..99eb8a2b8c73 100644
--- a/arch/arm64/boot/dts/apple/t7000-n102.dts
+++ b/arch/arm64/boot/dts/apple/t7000-n102.dts
@@ -46,3 +46,7 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0 &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/t7000-pmgr.dtsi b/arch/arm64/boot/dts/apple/t7000-pmgr.dtsi
new file mode 100644
index 000000000000..5948fa7afffc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7000-pmgr.dtsi
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T7000 "A8" SoC
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+&pmgr {
+	ps_cpu0: power-controller@20000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@20008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@20040 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_p: power-controller@201f8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+	};
+
+	ps_lio: power-controller@20100 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "lio";
+		apple,always-on; /* Core device */
+	};
+
+	ps_iomux: power-controller@20108 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@20110 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_debug: power-controller@20118 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_dwi: power-controller@20120 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@20128 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_mca0: power-controller@20130 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@20138 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@20140 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@20148 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@20150 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@20158 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@20160 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@20168 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@20170 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@20178 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@20180 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@20188 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@20190 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@20198 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@201a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@201a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@201b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@201b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@201c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@201c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@201d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@201d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@201e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@201e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@201f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb: power-controller@20248 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@20250 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@20258 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@20268 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@20278 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_disp_busmux: power-controller@202a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp_busmux";
+	};
+
+	ps_media: power-controller@202d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@202d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+	};
+
+	ps_msr: power-controller@202e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@202e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@202b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_disp1: power-controller@202c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_pcie_ref: power-controller@20220 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_hsic0_phy: power-controller@20200 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_hsic1_phy: power-controller@20208 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_ispsens0: power-controller@20210 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@20218 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_mcc: power-controller@20230 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_mcu: power-controller@20238 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcu";
+		apple,always-on; /* Core device */
+	};
+
+	ps_amp: power-controller@20240 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "amp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb2host0_ohci: power-controller@20260 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@20288 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@20290 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple Fabric, critical block */
+	};
+
+	ps_sf: power-controller@20298 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple Fabric, critical block */
+	};
+
+	ps_cp: power-controller@202a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_mipi_dsi: power-controller@202b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_dp: power-controller@202c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_vdec: power-controller@202f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans: power-controller@20318 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+	};
+
+	ps_venc: power-controller@20300 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@20308 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@20310 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_gfx: power-controller@20320 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@20400 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_pipe: power-controller@21000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@21008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me1: power-controller@21010 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7000.dtsi b/arch/arm64/boot/dts/apple/t7000.dtsi
index a7cc29e84c84..0342455d3444 100644
--- a/arch/arm64/boot/dts/apple/t7000.dtsi
+++ b/arch/arm64/boot/dts/apple/t7000.dtsi
@@ -33,16 +33,75 @@
 			compatible = "apple,typhoon";
 			reg = <0x0 0x0>;
 			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu1: cpu@1 {
 			compatible = "apple,typhoon";
 			reg = <0x0 0x1>;
 			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+		};
+	};
+
+	typhoon_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <300>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <50000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <29000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <4>;
+			clock-latency-ns = <29000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <5>;
+			clock-latency-ns = <36000>;
+		};
+		typhoon_opp06: opp06 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-level = <6>;
+			clock-latency-ns = <42000>;
+			status = "disabled"; /* Not available on N102 */
+		};
+		typhoon_opp07: opp07 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <7>;
+			clock-latency-ns = <49000>;
+			status = "disabled"; /* J96 and J97 only */
 		};
 	};
 
@@ -53,6 +112,12 @@
 		nonposted-mmio;
 		ranges;
 
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,t7000-cluster-cpufreq", "apple,s5l8960x-cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
 		serial0: serial@20a0c0000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x0a0c0000 0x0 0x4000>;
@@ -62,6 +127,7 @@
 			/* Use the bootloader-enabled clocks for now. */
 			clocks = <&clkref>, <&clkref>;
 			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
 			status = "disabled";
 		};
 
@@ -74,9 +140,74 @@
 			/* Use the bootloader-enabled clocks for now. */
 			clocks = <&clkref>, <&clkref>;
 			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart6>;
 			status = "disabled";
 		};
 
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 174 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 175 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 176 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t7000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x24000>;
+		};
+
 		wdt: watchdog@20e027000 {
 			compatible = "apple,t7000-wdt", "apple,wdt";
 			reg = <0x2 0x0e027000 0x0 0x1000>;
@@ -90,11 +221,20 @@
 			reg = <0x2 0x0e100000 0x0 0x100000>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200010 {
+			compatible = "apple,t7000-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200010 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
 		};
 
 		pinctrl: pinctrl@20e300000 {
 			compatible = "apple,t7000-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x0e300000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -111,6 +251,26 @@
 				     <AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(97, 1)>,
+					 <APPLE_PINMUX(96, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(139, 1)>,
+					 <APPLE_PINMUX(138, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(65, 1)>,
+					 <APPLE_PINMUX(64, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(87, 1)>,
+					 <APPLE_PINMUX(86, 1)>;
+			};
 		};
 	};
 
@@ -123,3 +283,5 @@
 			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
+
+#include "t7000-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t7001-air2.dtsi b/arch/arm64/boot/dts/apple/t7001-air2.dtsi
index 19fabd425c52..e4ec8c1977de 100644
--- a/arch/arm64/boot/dts/apple/t7001-air2.dtsi
+++ b/arch/arm64/boot/dts/apple/t7001-air2.dtsi
@@ -20,6 +20,7 @@
 		framebuffer0: framebuffer@0 {
 			compatible = "apple,simple-framebuffer", "simple-framebuffer";
 			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0 &ps_dp>;
 			/* Format properties will be added by loader */
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/apple/t7001-pmgr.dtsi b/arch/arm64/boot/dts/apple/t7001-pmgr.dtsi
new file mode 100644
index 000000000000..7321cfdcd189
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-pmgr.dtsi
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T7001 "A8X" SoC
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@20000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@20008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu2: power-controller@20010 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu2";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@20040 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_p: power-controller@201f8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+	};
+
+	ps_lio: power-controller@20100 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "lio";
+		apple,always-on; /* Core device */
+	};
+
+	ps_iomux: power-controller@20108 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@20110 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_debug: power-controller@20118 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_dwi: power-controller@20120 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@20128 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_mca0: power-controller@20130 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@20138 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@20140 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@20148 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@20150 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@20158 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@20160 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@20168 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@20170 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@20178 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@20180 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@20188 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@20190 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@20198 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@201a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@201a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@201b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@201b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@201c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@201c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@201d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@201d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@201e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_aes0: power-controller@201e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@201f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x201f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb: power-controller@20248 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@20250 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@20258 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@20268 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host2: power-controller@20278 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host2";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_disp_busmux: power-controller@202a8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp_busmux";
+	};
+
+	ps_disp1_busmux: power-controller@202c0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1_busmux";
+	};
+
+	ps_media: power-controller@202d8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp: power-controller@202d0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp";
+	};
+
+	ps_msr: power-controller@202e0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@202e8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0: power-controller@202b0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0";
+		power-domains = <&ps_disp_busmux>;
+	};
+
+	ps_disp1: power-controller@202c8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp1";
+		power-domains = <&ps_disp1_busmux>;
+	};
+
+	ps_pcie_ref: power-controller@20220 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_hsic0_phy: power-controller@20200 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_hsic1_phy: power-controller@20208 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic1_phy";
+		power-domains = <&ps_usb2host2>;
+	};
+
+	ps_ispsens0: power-controller@20210 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@20218 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_mcc: power-controller@20230 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_mcu: power-controller@20238 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcu";
+		apple,always-on; /* Core device */
+	};
+
+	ps_amp: power-controller@20240 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "amp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_usb2host0_ohci: power-controller@20260 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@20288 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@20290 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@20298 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_cp: power-controller@202a0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cp";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dp: power-controller@202b8 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0>;
+	};
+
+	ps_vdec: power-controller@202f0 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x202f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans: power-controller@20318 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+	};
+
+	ps_venc: power-controller@20300 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@20308 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@20310 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_gfx: power-controller@20320 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@20400 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x20400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_pipe: power-controller@21000 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me0: power-controller@21008 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc>;
+	};
+
+	ps_venc_me1: power-controller@21010 {
+		compatible = "apple,t7000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x21010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7001.dtsi b/arch/arm64/boot/dts/apple/t7001.dtsi
index a76e034c85e3..e1afb0542369 100644
--- a/arch/arm64/boot/dts/apple/t7001.dtsi
+++ b/arch/arm64/boot/dts/apple/t7001.dtsi
@@ -35,24 +35,86 @@
 			compatible = "apple,typhoon";
 			reg = <0x0 0x0>;
 			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu1: cpu@1 {
 			compatible = "apple,typhoon";
 			reg = <0x0 0x1>;
 			cpu-release-addr = <0 0>; /* To be filled in by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu2: cpu@2 {
 			compatible = "apple,typhoon";
 			reg = <0x0 0x2>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq>;
+			operating-points-v2 = <&typhoon_opp>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x200000>;
+		};
+	};
+
+	typhoon_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <300>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-level = <2>;
+			clock-latency-ns = <49000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <3>;
+			clock-latency-ns = <31000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <840000000>;
+			opp-level = <4>;
+			clock-latency-ns = <32000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-level = <5>;
+			clock-latency-ns = <32000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-level = <6>;
+			clock-latency-ns = <37000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-level = <7>;
+			clock-latency-ns = <41000>;
 		};
 	};
 
@@ -63,6 +125,12 @@
 		nonposted-mmio;
 		ranges;
 
+		cpufreq: performance-controller@202220000 {
+			compatible = "apple,t7000-cluster-cpufreq", "apple,s5l8960x-cluster-cpufreq";
+			reg = <0x2 0x02220000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
 		serial0: serial@20a0c0000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x0a0c0000 0x0 0x4000>;
@@ -72,9 +140,74 @@
 			/* Use the bootloader-enabled clocks for now. */
 			clocks = <&clkref>, <&clkref>;
 			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 174 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 175 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 176 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t7000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x24000>;
+		};
+
 		wdt: watchdog@20e027000 {
 			compatible = "apple,t7000-wdt", "apple,wdt";
 			reg = <0x2 0x0e027000 0x0 0x1000>;
@@ -88,11 +221,13 @@
 			reg = <0x2 0x0e100000 0x0 0x100000>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+			power-domains = <&ps_aic>;
 		};
 
 		pinctrl: pinctrl@20e300000 {
 			compatible = "apple,t7000-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x0e300000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -109,6 +244,26 @@
 				     <AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(38, 1)>,
+					 <APPLE_PINMUX(37, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(66, 1)>,
+					 <APPLE_PINMUX(65, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(133, 1)>,
+					 <APPLE_PINMUX(132, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(135, 1)>,
+					 <APPLE_PINMUX(134, 1)>;
+			};
 		};
 	};
 
@@ -121,3 +276,5 @@
 			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
+
+#include "t7001-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8010-7.dtsi b/arch/arm64/boot/dts/apple/t8010-7.dtsi
index 1332fd73f50f..1913b7b2c1fe 100644
--- a/arch/arm64/boot/dts/apple/t8010-7.dtsi
+++ b/arch/arm64/boot/dts/apple/t8010-7.dtsi
@@ -41,3 +41,15 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_fe &ps_disp0_be &ps_mipi_dsi>;
+};
+
+&hurricane_opp09 {
+	status = "okay";
+};
+
+&hurricane_opp10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-common.dtsi b/arch/arm64/boot/dts/apple/t8010-common.dtsi
index 6613fb57c92f..44dc968638b1 100644
--- a/arch/arm64/boot/dts/apple/t8010-common.dtsi
+++ b/arch/arm64/boot/dts/apple/t8010-common.dtsi
@@ -43,6 +43,10 @@
 	};
 };
 
+&dwi_bl {
+	status = "okay";
+};
+
 &serial0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi b/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi
index 81696c6e302c..1e46e4a3a7f4 100644
--- a/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi
+++ b/arch/arm64/boot/dts/apple/t8010-ipad6.dtsi
@@ -42,3 +42,15 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_fe &ps_disp0_be &ps_dp>;
+};
+
+&hurricane_opp09 {
+	status = "okay";
+};
+
+&hurricane_opp10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-n112.dts b/arch/arm64/boot/dts/apple/t8010-n112.dts
index 6e71c3cb5d92..48fdbedf74da 100644
--- a/arch/arm64/boot/dts/apple/t8010-n112.dts
+++ b/arch/arm64/boot/dts/apple/t8010-n112.dts
@@ -45,3 +45,7 @@
 		};
 	};
 };
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_fe &ps_disp0_be &ps_mipi_dsi>;
+};
diff --git a/arch/arm64/boot/dts/apple/t8010-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8010-pmgr.dtsi
new file mode 100644
index 000000000000..6d451088616a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8010-pmgr.dtsi
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8010 "A10" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80160 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80168 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_socuvd: power-controller@80150 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "socuvd";
+	};
+
+	ps_mca0: power-controller@80178 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80180 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80188 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80190 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80170 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_isp_sens0: power-controller@80130 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80138 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_isp_sens2: power-controller@80140 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens2";
+	};
+
+	ps_usb: power-controller@80268 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80270 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80278 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80288 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp_sys: power-controller@802d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@802e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp0_be: power-controller@802b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_pmp: power-controller@802f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@802f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_uart3: power-controller@80200 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80208 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@80210 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80218 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80220 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80228 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80238 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80240 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80248 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80250 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80258 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80260 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80280 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@80290 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@80298 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_dp: power-controller@802c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_venc_sys: power-controller@80310 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pcie: power-controller@80318 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@80320 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_vdec0: power-controller@80300 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec0";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80328 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_dprx: power-controller@84028 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dprx";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@88000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe5: power-controller@88008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_me0: power-controller@88010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_cpu &ps_aop_busif &ps_aop_filter>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+	};
+
+	ps_aop_cpu: power-controller@80048 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80050 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80058 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8010.dtsi b/arch/arm64/boot/dts/apple/t8010.dtsi
index e3d6a8354103..522b3896aa87 100644
--- a/arch/arm64/boot/dts/apple/t8010.dtsi
+++ b/arch/arm64/boot/dts/apple/t8010.dtsi
@@ -32,19 +32,112 @@
 			compatible = "apple,hurricane-zephyr";
 			reg = <0x0 0x0>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
 		};
 
 		cpu1: cpu@1 {
 			compatible = "apple,hurricane-zephyr";
 			reg = <0x0 0x1>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>; /* P-cluster */
 		};
 	};
 
+	fusion_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * Apple Fusion Architecture: Hardware big.LITTLE switcher
+		 * that use p-state transitions to switch between cores.
+		 * Only one type of core can be active at a given time.
+		 *
+		 * The E-core frequencies are adjusted so performance scales
+		 * linearly with reported clock speed.
+		 */
+
+		opp01 {
+			opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
+			opp-level = <1>;
+			clock-latency-ns = <11000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
+			opp-level = <2>;
+			clock-latency-ns = <49000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <425000000>; /* 732 MHz, E-core */
+			opp-level = <3>;
+			clock-latency-ns = <13000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <637000000>; /* 1092 MHz, E-core */
+			opp-level = <4>;
+			clock-latency-ns = <18000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <6>;
+			clock-latency-ns = <31000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1356000000>;
+			opp-level = <7>;
+			clock-latency-ns = <37000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1644000000>;
+			opp-level = <8>;
+			clock-latency-ns = <39500>;
+		};
+		hurricane_opp09: opp09 {
+			opp-hz = /bits/ 64 <1944000000>;
+			opp-level = <9>;
+			clock-latency-ns = <46000>;
+			status = "disabled"; /* Not available on N112 */
+		};
+		hurricane_opp10: opp10 {
+			opp-hz = /bits/ 64 <2244000000>;
+			opp-level = <10>;
+			clock-latency-ns = <56000>;
+			status = "disabled"; /* Not available on N112 */
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		hurricane_opp11: opp11 {
+			opp-hz = /bits/ 64 <2340000000>;
+			opp-level = <11>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+			status = "disabled"; /* Not available on N112 */
+		};
+#endif
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -52,6 +145,12 @@
 		nonposted-mmio;
 		ranges;
 
+		cpufreq: performance-controller@202f20000 {
+			compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02f20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
 		serial0: serial@20a0c0000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x0a0c0000 0x0 0x4000>;
@@ -61,19 +160,93 @@
 			/* Use the bootloader-enabled clocks for now. */
 			clocks = <&clkref>, <&clkref>;
 			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
 			status = "disabled";
 		};
 
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
 		aic: interrupt-controller@20e100000 {
 			compatible = "apple,t8010-aic", "apple,aic";
 			reg = <0x2 0x0e100000 0x0 0x100000>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		dwi_bl: backlight@20e200080 {
+			compatible = "apple,t8010-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x0e200080 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
 		};
 
 		pinctrl_ap: pinctrl@20f100000 {
 			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -90,11 +263,32 @@
 				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(197, 1)>,
+					 <APPLE_PINMUX(196, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(40, 1)>,
+					 <APPLE_PINMUX(39, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(132, 1)>,
+					 <APPLE_PINMUX(133, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(41, 1)>,
+					 <APPLE_PINMUX(42, 1)>;
+			};
 		};
 
 		pinctrl_aop: pinctrl@2100f0000 {
 			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -113,6 +307,14 @@
 				     <AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
 		wdt: watchdog@2102b0000 {
 			compatible = "apple,t8010-wdt", "apple,wdt";
 			reg = <0x2 0x102b0000 0x0 0x4000>;
@@ -131,3 +333,5 @@
 			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
+
+#include "t8010-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8011-common.dtsi b/arch/arm64/boot/dts/apple/t8011-common.dtsi
index 44a0d0ea2ee3..2010b56246f1 100644
--- a/arch/arm64/boot/dts/apple/t8011-common.dtsi
+++ b/arch/arm64/boot/dts/apple/t8011-common.dtsi
@@ -22,6 +22,7 @@
 		framebuffer0: framebuffer@0 {
 			compatible = "apple,simple-framebuffer", "simple-framebuffer";
 			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0_fe &ps_disp0_be &ps_dp>;
 			/* Format properties will be added by loader */
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/apple/t8011-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8011-pmgr.dtsi
new file mode 100644
index 000000000000..c44e3f9d7087
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8011-pmgr.dtsi
@@ -0,0 +1,806 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8011 "A10X" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu2: power-controller@80010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu2";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80158 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80160 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80170 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80178 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80180 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80188 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80190 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@801f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80168 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsic0_phy: power-controller@80128 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsic0_phy";
+		power-domains = <&ps_usb3host>;
+	};
+
+	ps_isp_sens0: power-controller@80130 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80138 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_isp_sens2: power-controller@80140 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens2";
+	};
+
+	ps_usb: power-controller@80288 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80290 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host: power-controller@80298 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2dev: power-controller@802a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2dev";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb3host: power-controller@802a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb3host";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb3dev: power-controller@802b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb3dev";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_media: power-controller@802e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp_sys: power-controller@802e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+	};
+
+	ps_msr: power-controller@802f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+	};
+
+	ps_disp0_be: power-controller@802d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_dpa: power-controller@80230 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80200 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@80208 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80210 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80218 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80220 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80238 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80240 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80248 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80250 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80258 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80260 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@80268 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs5: power-controller@80270 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs6: power-controller@80278 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+	};
+
+	ps_dcs7: power-controller@80280 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+	};
+
+	ps_smx: power-controller@802b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_dp: power-controller@802d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_venc_sys: power-controller@80320 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_srs: power-controller@80390 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "srs";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pms_sram: power-controller@80308 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_pmp: power-controller@80300 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pcie: power-controller@80328 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+	};
+
+	ps_pcie_aux: power-controller@80330 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_vdec0: power-controller@80310 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec0";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80338 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_dprx: power-controller@84028 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dprx";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@88000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe5: power-controller@88008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_me0: power-controller@88010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop";
+		power-domains = <&ps_aop_cpu &ps_aop_filter &ps_aop_busif>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_gpio: power-controller@80010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_gpio";
+	};
+
+	ps_aop_cpu: power-controller@80048 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80048 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80050 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_aop_busif: power-controller@80058 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_busif";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8011-pro2.dtsi b/arch/arm64/boot/dts/apple/t8011-pro2.dtsi
index f4e707415003..5eaa0a73350f 100644
--- a/arch/arm64/boot/dts/apple/t8011-pro2.dtsi
+++ b/arch/arm64/boot/dts/apple/t8011-pro2.dtsi
@@ -40,3 +40,11 @@
 		};
 	};
 };
+
+&ps_dcs6 {
+	apple,always-on; /* LPDDR4 interface */
+};
+
+&ps_dcs7 {
+	apple,always-on; /* LPDDR4 interface */
+};
diff --git a/arch/arm64/boot/dts/apple/t8011.dtsi b/arch/arm64/boot/dts/apple/t8011.dtsi
index 6c4ed9dc4a50..039aa4d1e887 100644
--- a/arch/arm64/boot/dts/apple/t8011.dtsi
+++ b/arch/arm64/boot/dts/apple/t8011.dtsi
@@ -32,27 +32,116 @@
 			compatible = "apple,hurricane-zephyr";
 			reg = <0x0 0x0>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
 		};
 
 		cpu1: cpu@1 {
 			compatible = "apple,hurricane-zephyr";
 			reg = <0x0 0x1>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
 		};
 
 		cpu2: cpu@2 {
 			compatible = "apple,hurricane-zephyr";
 			reg = <0x0 0x2>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x800000>; /* P-cluster */
 		};
 	};
 
+	fusion_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * Apple Fusion Architecture: Hardwired big.LITTLE switcher
+		 * that use p-state transitions to switch between cores.
+		 *
+		 * The E-core frequencies are adjusted so performance scales
+		 * linearly with reported clock speed.
+		 */
+
+		opp01 {
+			opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
+			opp-level = <1>;
+			clock-latency-ns = <12000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
+			opp-level = <2>;
+			clock-latency-ns = <135000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <448000000>; /* 768 MHz, E-core */
+			opp-level = <3>;
+			clock-latency-ns = <105000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <662000000>; /* 1152 MHz, E-core */
+			opp-level = <4>;
+			clock-latency-ns = <115000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <804000000>;
+			opp-level = <5>;
+			clock-latency-ns = <122000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1140000000>;
+			opp-level = <6>;
+			clock-latency-ns = <120000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1548000000>;
+			opp-level = <7>;
+			clock-latency-ns = <125000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1956000000>;
+			opp-level = <8>;
+			clock-latency-ns = <135000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2316000000>;
+			opp-level = <9>;
+			clock-latency-ns = <140000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp10 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <10>;
+			clock-latency-ns = <140000>;
+			turbo-mode;
+		};
+#endif
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -60,6 +149,12 @@
 		nonposted-mmio;
 		ranges;
 
+		cpufreq: performance-controller@202f20000 {
+			compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02f20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
 		serial0: serial@20a0c0000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x0a0c0000 0x0 0x4000>;
@@ -69,19 +164,86 @@
 			/* Use the bootloader-enabled clocks for now. */
 			clocks = <&clkref>, <&clkref>;
 			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 230 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 231 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
 		aic: interrupt-controller@20e100000 {
 			compatible = "apple,t8010-aic", "apple,aic";
 			reg = <0x2 0x0e100000 0x0 0x100000>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+			power-domains = <&ps_aic>;
 		};
 
 		pinctrl_ap: pinctrl@20f100000 {
 			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -98,11 +260,32 @@
 				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(211, 1)>,
+					 <APPLE_PINMUX(210, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(156, 1)>,
+					 <APPLE_PINMUX(155, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(58, 1)>,
+					 <APPLE_PINMUX(57, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(158, 1)>,
+					 <APPLE_PINMUX(157, 1)>;
+			};
 		};
 
 		pinctrl_aop: pinctrl@2100f0000 {
 			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x100f0000 0x0 0x100000>;
+			power-domains = <&ps_aop_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -121,6 +304,14 @@
 				     <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pmgr_mini: power-management@210200000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x10200000 0 0x84000>;
+		};
+
 		wdt: watchdog@2102b0000 {
 			compatible = "apple,t8010-wdt", "apple,wdt";
 			reg = <0x2 0x102b0000 0x0 0x4000>;
@@ -139,3 +330,5 @@
 			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
+
+#include "t8011-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8012-j132.dts b/arch/arm64/boot/dts/apple/t8012-j132.dts
new file mode 100644
index 000000000000..7dcac51703ff
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j132.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,2 (j132), J132, iBridge2,4
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,2 (j132)";
+	compatible = "apple,j132", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j137.dts b/arch/arm64/boot/dts/apple/t8012-j137.dts
new file mode 100644
index 000000000000..dbde1ad7ce14
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j137.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 iMacPro1,1 (j137), J137, iBridge2,1
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 iMacPro1,1 (j137)";
+	compatible = "apple,j137", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j140a.dts b/arch/arm64/boot/dts/apple/t8012-j140a.dts
new file mode 100644
index 000000000000..5df1ff74d2df
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j140a.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookAir8,2 (j140a), J140a, iBridge2,12
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacBookAir8,2 (j140a)";
+	compatible = "apple,j140a", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j140k.dts b/arch/arm64/boot/dts/apple/t8012-j140k.dts
new file mode 100644
index 000000000000..a0ef1585e5c2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j140k.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookAir8,1 (j140k), J140k, iBridge2,8
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacBookAir8,1 (j140k)";
+	compatible = "apple,j140k", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j152f.dts b/arch/arm64/boot/dts/apple/t8012-j152f.dts
new file mode 100644
index 000000000000..261416eaf97e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j152f.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,1 (j152f), J152f, iBridge2,14
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,1 (j152f)";
+	compatible = "apple,j152f", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j160.dts b/arch/arm64/boot/dts/apple/t8012-j160.dts
new file mode 100644
index 000000000000..fbcc0604f4a0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j160.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacPro7,1 (j160), J160, iBridge2,6
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacPro7,1 (j160)";
+	compatible = "apple,j160", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j174.dts b/arch/arm64/boot/dts/apple/t8012-j174.dts
new file mode 100644
index 000000000000..d11c70f84a71
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j174.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 Macmini8,1 (j174), J174, iBridge2,5
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 Macmini8,1 (j174)";
+	compatible = "apple,j174", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j185.dts b/arch/arm64/boot/dts/apple/t8012-j185.dts
new file mode 100644
index 000000000000..33492f5db46d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j185.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 iMac20,1 (j185), J185, iBridge2,19
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 iMac20,1 (j185)";
+	compatible = "apple,j185", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j185f.dts b/arch/arm64/boot/dts/apple/t8012-j185f.dts
new file mode 100644
index 000000000000..3a4abdd8f7d7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j185f.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 iMac20,2 (j185f), J185f, iBridge2,20
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 iMac20,2 (j185f)";
+	compatible = "apple,j185f", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j213.dts b/arch/arm64/boot/dts/apple/t8012-j213.dts
new file mode 100644
index 000000000000..8270812b9a68
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j213.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,4 (j213), J213, iBridge2,10
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,4 (j213)";
+	compatible = "apple,j213", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j214k.dts b/arch/arm64/boot/dts/apple/t8012-j214k.dts
new file mode 100644
index 000000000000..5b8e42512060
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j214k.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,2 (j214k), J214k, iBridge2,16
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,2 (j214k)";
+	compatible = "apple,j214k", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j215.dts b/arch/arm64/boot/dts/apple/t8012-j215.dts
new file mode 100644
index 000000000000..ad574fbf7f92
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j215.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,4 (j215), J215, iBridge2,22
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,4 (j215)";
+	compatible = "apple,j215", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j223.dts b/arch/arm64/boot/dts/apple/t8012-j223.dts
new file mode 100644
index 000000000000..de75d775aac5
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j223.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro16,3 (j223), J223, iBridge2,21
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro16,3 (j223)";
+	compatible = "apple,j223", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j230k.dts b/arch/arm64/boot/dts/apple/t8012-j230k.dts
new file mode 100644
index 000000000000..4b19bc70ab0f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j230k.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookAir9,1 (j230k), J230k, iBridge2,15
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+
+/ {
+	model = "Apple T2 MacBookAir9,1 (j230k)";
+	compatible = "apple,j230k", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j680.dts b/arch/arm64/boot/dts/apple/t8012-j680.dts
new file mode 100644
index 000000000000..aa5a72e07d3f
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j680.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,1 (j680), J680, iBridge2,3
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,1 (j680)";
+	compatible = "apple,j680", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-j780.dts b/arch/arm64/boot/dts/apple/t8012-j780.dts
new file mode 100644
index 000000000000..9cee891cb16d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-j780.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T2 MacBookPro15,3 (j780), J780, iBridge2,7
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
+
+/ {
+	model = "Apple T2 MacBookPro15,3 (j780)";
+	compatible = "apple,j780", "apple,t8012", "apple,arm-platform";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8012-jxxx.dtsi
new file mode 100644
index 000000000000..36e82633bc52
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-jxxx.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Device Tree for all T2 devices
+ *
+ * target-type: J132, J137, J140a, J140k, J152f, J160, J174, J185, J185f
+ * J213, J214k, J215, J223, J230k, J680, J780
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include "t8012.dtsi"
+
+/ {
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0 0>; /* To be filled by loader */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8012-pmgr.dtsi
new file mode 100644
index 000000000000..35a462edd4af
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-pmgr.dtsi
@@ -0,0 +1,837 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8012 "T2" SoC
+ *
+ * Copyright (c) 2024 Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80158 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80160 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_iomux: power-controller@80150 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "iomux";
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_gpio: power-controller@80110 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pcie_down_ref: power-controller@80138 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_down_ref";
+	};
+
+	ps_pcie_stg0_ref: power-controller@80140 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg0_ref";
+	};
+
+	ps_pcie_stg1_ref: power-controller@80148 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg1_ref";
+	};
+
+	ps_mca0: power-controller@80170 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80178 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80180 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80188 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80190 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca5: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801c0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80168 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_isp_sens0: power-controller@80120 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens0";
+	};
+
+	ps_isp_sens1: power-controller@80128 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens1";
+	};
+
+	ps_isp_sens2: power-controller@80130 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sens2";
+	};
+
+	ps_pms: power-controller@80118 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_i2c4: power-controller@801c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c5: power-controller@801d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c6: power-controller@801d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_usb: power-controller@80268 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctrl: power-controller@80270 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctrl";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80278 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_usb2host1: power-controller@80288 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_rtmux: power-controller@802a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802d8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_isp_sys: power-controller@802d0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@802e8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_jpg: power-controller@802e0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802b0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp0_be: power-controller@802b8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_uart0: power-controller@80200 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@80208 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@80210 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart3: power-controller@80218 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80220 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_dpa: power-controller@80228 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80230 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80240 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80248 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@80250 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@80258 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		/* Not used on some devicecs, to be disabled by loader */
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@80260 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		/* Not used on some devicecs, to be disabled by loader */
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80280 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usbotg: power-controller@80290 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbotg";
+		power-domains = <&ps_usbctrl>;
+	};
+
+	ps_smx: power-controller@80298 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802c8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_pmp: power-controller@802f0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@802f8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_pcie_up_af: power-controller@80320 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_up_af";
+		power-domains = <&ps_iomux>;
+	};
+
+	ps_pcie_up: power-controller@80328 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_up";
+		power-domains = <&ps_pcie_up_af>;
+	};
+
+	ps_venc_sys: power-controller@80300 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_ans2: power-controller@80308 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans2";
+		power-domains = <&ps_iomux>;
+	};
+
+	ps_pcie_down: power-controller@80310 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_down";
+		power-domains = <&ps_iomux>;
+	};
+
+	ps_pcie_down_aux: power-controller@80318 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_down_aux";
+	};
+
+	ps_pcie_up_aux: power-controller@80330 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_up_aux";
+		power-domains = <&ps_pcie_up>;
+	};
+
+	ps_pcie_stg0: power-controller@80338 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg0";
+		power-domains = <&ps_ans2>;
+	};
+
+	ps_pcie_stg0_aux: power-controller@80340 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg0_aux";
+	};
+
+	ps_pcie_stg1: power-controller@80348 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg1";
+		power-domains = <&ps_ans2>;
+	};
+
+	ps_pcie_stg1_aux: power-controller@80350 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_stg1_aux";
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@88000 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+	};
+
+	ps_venc_pipe5: power-controller@88008 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+	};
+
+	ps_venc_me0: power-controller@88010 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88018 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_spmi: power-controller@80058 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spmi";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_aon: power-controller@80060 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80060 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_smc_fabric: power-controller@80030 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_smc_aon: power-controller@80088 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80088 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_debug: power-controller@80050 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_nub_sram: power-controller@801a0 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_sram";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_fabric: power-controller@80198 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_smc_cpu: power-controller@801a8 {
+		compatible = "apple,t8010-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_cpu";
+		power-domains = <&ps_smc_fabric &ps_smc_aon>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8012-touchbar.dtsi b/arch/arm64/boot/dts/apple/t8012-touchbar.dtsi
new file mode 100644
index 000000000000..fc4a80d0c787
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012-touchbar.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Device Tree for T2 devices with a Touch Bar
+ *
+ * target-type: J152f, J213, J214k, J215, J223, J680, J780
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+/ {
+	chosen {
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0_fe &ps_disp0_be &ps_mipi_dsi>;
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8012.dtsi b/arch/arm64/boot/dts/apple/t8012.dtsi
new file mode 100644
index 000000000000..e7923814169b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8012.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8012 "T2" SoC
+ *
+ * Other names: H9M, "Gibraltar"
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	interrupt-parent = <&aic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@10000 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x10000>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		cpu1: cpu@10001 {
+			compatible = "apple,hurricane-zephyr";
+			reg = <0x0 0x10001>;
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&fusion_opp>;
+			performance-domains = <&cpufreq>;
+			enable-method = "spin-table";
+			device_type = "cpu";
+			next-level-cache = <&l2_cache>;
+			i-cache-size = <0x10000>; /* P-core */
+			d-cache-size = <0x10000>; /* P-core */
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x300000>; /* P-cluster */
+		};
+	};
+
+	fusion_opp: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * Apple Fusion Architecture: Hardware big.LITTLE switcher
+		 * that use p-state transitions to switch between cores.
+		 * Only one type of core can be active at a given time.
+		 *
+		 * The E-core frequencies are adjusted so performance scales
+		 * linearly with reported clock speed.
+		 */
+
+		opp01 {
+			opp-hz = /bits/ 64 <172000000>; /* 300 MHz, E-core */
+			opp-level = <1>;
+			clock-latency-ns = <11000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <230000000>; /* 396 MHz, E-core */
+			opp-level = <2>;
+			clock-latency-ns = <140000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <425000000>; /* 732 MHz, E-core */
+			opp-level = <3>;
+			clock-latency-ns = <110000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <637000000>; /* 1092 MHz, E-core */
+			opp-level = <4>;
+			clock-latency-ns = <130000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-level = <5>;
+			clock-latency-ns = <130000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <6>;
+			clock-latency-ns = <130000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1356000000>;
+			opp-level = <7>;
+			clock-latency-ns = <130000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <1644000000>;
+			opp-level = <8>;
+			clock-latency-ns = <135000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <1944000000>;
+			opp-level = <9>;
+			clock-latency-ns = <140000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2244000000>;
+			opp-level = <10>;
+			clock-latency-ns = <150000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp11 {
+			opp-hz = /bits/ 64 <2340000000>;
+			opp-level = <11>;
+			clock-latency-ns = <150000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		nonposted-mmio;
+		ranges;
+
+		cpufreq: performance-controller@202f20000 {
+			compatible = "apple,t8010-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x02f20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		serial0: serial@20a600000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x0a600000 0x0 0x4000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>;
+			/* Use the bootloader-enabled clocks for now. */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		pmgr: power-management@20e000000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0xe000000 0 0x8c000>;
+		};
+
+		aic: interrupt-controller@20e100000 {
+			compatible = "apple,t8010-aic", "apple,aic";
+			reg = <0x2 0x0e100000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pinctrl_ap: pinctrl@20f100000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0f100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 221>;
+			apple,npins = <221>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 51 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aop: pinctrl@2100f0000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x0100f0000 0x0 0x10000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 41>;
+			apple,npins = <41>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 137 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spmi: spmi@211180700 {
+			compatible = "apple,t8012-spmi", "apple,t8103-spmi";
+			reg = <0x2 0x11180700 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		pinctrl_nub: pinctrl@2111f0000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x111f0000 0x0 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 19>;
+			apple,npins = <19>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 166 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@211200000 {
+			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x11200000 0 0x84000>;
+		};
+
+		wdt: watchdog@2112b0000 {
+			compatible = "apple,t8010-wdt", "apple,wdt";
+			reg = <0x2 0x112b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 168 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@212024000 {
+			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x12024000 0x0 0x1000>;
+			power-domains = <&ps_smc_cpu>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 81>;
+			apple,npins = <81>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * SMC is not yet supported and accessing this pinctrl while SMC is
+			 * suspended results in a hang.
+			 */
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt";
+		/* Note that T2 doesn't actually have a hypervisor (EL2 is not implemented). */
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+#include "t8012-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8015-8.dtsi b/arch/arm64/boot/dts/apple/t8015-8.dtsi
index b6505b5185bd..0300ee1a2ffb 100644
--- a/arch/arm64/boot/dts/apple/t8015-8.dtsi
+++ b/arch/arm64/boot/dts/apple/t8015-8.dtsi
@@ -11,3 +11,7 @@
 / {
 	chassis-type = "handset";
 };
+
+&dwi_bl {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8015-common.dtsi b/arch/arm64/boot/dts/apple/t8015-common.dtsi
index 69258a33ea50..498f58fb9715 100644
--- a/arch/arm64/boot/dts/apple/t8015-common.dtsi
+++ b/arch/arm64/boot/dts/apple/t8015-common.dtsi
@@ -24,6 +24,7 @@
 		framebuffer0: framebuffer@0 {
 			compatible = "apple,simple-framebuffer", "simple-framebuffer";
 			reg = <0 0 0 0>; /* To be filled by loader */
+			power-domains = <&ps_disp0_be &ps_mipi_dsi &ps_disp0_hilo &ps_disp0_ppp>;
 			/* Format properties will be added by loader */
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
new file mode 100644
index 000000000000..1d8da9c7863e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
@@ -0,0 +1,932 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8015 "A11" SoC
+ *
+ * Copyright (c) 2024, Nick Chan <towinchenmi@gmail.com>
+ */
+
+&pmgr {
+	ps_cpu0: power-controller@80000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu0";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu1: power-controller@80008 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu1";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu2: power-controller@80010 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu2";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu3: power-controller@80018 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu3";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu4: power-controller@80020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu4";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpu5: power-controller@80028 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpu5";
+		apple,always-on; /* Core device */
+	};
+
+	ps_cpm: power-controller@80040 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80040 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cpm";
+		apple,always-on; /* Core device */
+	};
+
+	ps_sio_busif: power-controller@80158 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio_p: power-controller@80160 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_p";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sbr: power-controller@80100 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_aic: power-controller@80108 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@80110 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+	};
+
+	ps_gpio: power-controller@80118 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms: power-controller@80120 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pcie_ref: power-controller@80148 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_mca0: power-controller@80170 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca1: power-controller@80178 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca2: power-controller@80180 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca3: power-controller@80188 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mca4: power-controller@80190 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_pwm0: power-controller@801a0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pwm0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c0: power-controller@801a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c1: power-controller@801b0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c2: power-controller@801b8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_i2c3: power-controller@801c0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi0: power-controller@801c8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi1: power-controller@801d0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi2: power-controller@801d8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_spi3: power-controller@801e0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart0: power-controller@801e8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart1: power-controller@801f0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart2: power-controller@801f8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x801f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_sio: power-controller@80168 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_p>;
+		apple,always-on; /* Core device */
+	};
+
+	ps_hsicphy: power-controller@80128 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hsicphy";
+		power-domains = <&ps_usb2host1>;
+	};
+
+	ps_ispsens0: power-controller@80130 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@80138 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_ispsens2: power-controller@80140 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens2";
+	};
+
+	ps_mca5: power-controller@80198 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_usb: power-controller@80270 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb";
+	};
+
+	ps_usbctlreg: power-controller@80278 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usbctlreg";
+		power-domains = <&ps_usb>;
+	};
+
+	ps_usb2host0: power-controller@80280 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0";
+		power-domains = <&ps_usbctlreg>;
+	};
+
+	ps_usb2host1: power-controller@80290 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host1";
+		power-domains = <&ps_usbctlreg>;
+	};
+
+	ps_rtmux: power-controller@802b0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rtmux";
+	};
+
+	ps_media: power-controller@802f0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "media";
+	};
+
+	ps_jpg: power-controller@802f8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_media>;
+	};
+
+	ps_disp0_fe: power-controller@802b8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_disp0_be: power-controller@802c0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be";
+		power-domains = <&ps_disp0_fe>;
+	};
+
+	ps_disp0_gp: power-controller@802c8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_gp";
+		power-domains = <&ps_disp0_be>;
+		status = "disabled";
+	};
+
+	ps_uart3: power-controller@80200 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart4: power-controller@80208 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart5: power-controller@80210 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart6: power-controller@80218 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart7: power-controller@80220 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_uart8: power-controller@80228 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_hfd0: power-controller@80238 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "hfd0";
+		power-domains = <&ps_sio_p>;
+	};
+
+	ps_mcc: power-controller@80248 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory cache controller */
+	};
+
+	ps_dcs0: power-controller@80250 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_dcs1: power-controller@80258 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_dcs2: power-controller@80260 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_dcs3: power-controller@80268 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4X interface */
+	};
+
+	ps_usb2host0_ohci: power-controller@80288 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2host0_ohci";
+		power-domains = <&ps_usb2host0>;
+	};
+
+	ps_usb2dev: power-controller@80298 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "usb2dev";
+		power-domains = <&ps_usbctlreg>;
+	};
+
+	ps_smx: power-controller@802a0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sf: power-controller@802a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sf";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mipi_dsi: power-controller@802d8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_dp: power-controller@802e0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dp";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_dpa: power-controller@80230 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa";
+	};
+
+	ps_disp0_be_2x: power-controller@802d0 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x802d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_be_2x";
+		power-domains = <&ps_disp0_be>;
+	};
+
+	ps_isp_sys: power-controller@80350 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rtmux>;
+	};
+
+	ps_msr: power-controller@80300 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_media>;
+	};
+
+	ps_venc_sys: power-controller@80398 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_pmp: power-controller@80308 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@80310 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_pcie: power-controller@80318 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie";
+		power-domains = <&ps_pcie_aux>, <&ps_pcie_direct>, <&ps_pcie_ref>;
+	};
+
+	ps_pcie_aux: power-controller@80320 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_aux";
+	};
+
+	ps_vdec0: power-controller@80388 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "vdec0";
+		power-domains = <&ps_media>;
+	};
+
+	ps_gfx: power-controller@80338 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_ans2: power-controller@80328 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans2";
+		apple,always-on;
+	};
+
+	ps_pcie_direct: power-controller@80330 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_direct";
+		apple,always-on;
+	};
+
+	ps_avd_sys: power-controller@803a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x803a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "avd_sys";
+		power-domains = <&ps_media>;
+	};
+
+	ps_sep: power-controller@80400 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_disp0_gp0: power-controller@80830 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80830 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_gp0";
+		power-domains = <&ps_disp0_gp>;
+		status = "disabled";
+	};
+
+	ps_disp0_gp1: power-controller@80838 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80838 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_gp1";
+		status = "disabled";
+	};
+
+	ps_disp0_ppp: power-controller@80840 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80840 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_ppp";
+	};
+
+	ps_disp0_hilo: power-controller@80848 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80848 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_hilo";
+	};
+
+	ps_isp_rsts0: power-controller@84000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts0";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_rsts1: power-controller@84008 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_rsts1";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_vis: power-controller@84010 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_vis";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_be: power-controller@84018 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_be";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_pearl: power-controller@84020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_pearl";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_dprx: power-controller@84028 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dprx";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_isp_cnv: power-controller@84030 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x84030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_cnv";
+		power-domains = <&ps_isp_sys>;
+	};
+
+	ps_venc_dma: power-controller@88000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_dma";
+	};
+
+	ps_venc_pipe4: power-controller@88010 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+	};
+
+	ps_venc_pipe5: power-controller@88018 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+	};
+
+	ps_venc_me0: power-controller@88020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+	};
+
+	ps_venc_me1: power-controller@88028 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+	};
+};
+
+&pmgr_mini {
+	ps_aop_base: power-controller@80008 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_base";
+		power-domains = <&ps_aop_cpu &ps_aop_filter>;
+		apple,always-on; /* Always on processor */
+	};
+
+	ps_debug: power-controller@80050 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80050 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+	};
+
+	ps_aop_cpu: power-controller@80020 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_cpu";
+	};
+
+	ps_aop_filter: power-controller@80000 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aop_filter";
+	};
+
+	ps_spmi: power-controller@80058 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80058 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spmi";
+		apple,always-on; /* System Power Management Interface */
+	};
+
+	ps_smc_i2cm1: power-controller@800a8 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x800a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_i2cm1";
+	};
+
+	ps_smc_fabric: power-controller@80030 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_fabric";
+	};
+
+	ps_smc_cpu: power-controller@80140 {
+		compatible = "apple,t8015-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smc_cpu";
+		power-domains = <&ps_smc_fabric &ps_smc_i2cm1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8015.dtsi b/arch/arm64/boot/dts/apple/t8015.dtsi
index 8828d830e5be..586d3cf1f375 100644
--- a/arch/arm64/boot/dts/apple/t8015.dtsi
+++ b/arch/arm64/boot/dts/apple/t8015.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	interrupt-parent = <&aic>;
@@ -58,49 +59,192 @@
 			compatible = "apple,mistral";
 			reg = <0x0 0x0>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
 		};
 
 		cpu_e1: cpu@1 {
 			compatible = "apple,mistral";
 			reg = <0x0 0x1>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
 		};
 
 		cpu_e2: cpu@2 {
 			compatible = "apple,mistral";
 			reg = <0x0 0x2>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
 		};
 
 		cpu_e3: cpu@3 {
 			compatible = "apple,mistral";
 			reg = <0x0 0x3>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_e>;
+			operating-points-v2 = <&mistral_opp>;
+			capacity-dmips-mhz = <633>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x8000>;
+			d-cache-size = <0x8000>;
 		};
 
 		cpu_p0: cpu@10004 {
 			compatible = "apple,monsoon";
 			reg = <0x0 0x10004>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_p>;
+			operating-points-v2 = <&monsoon_opp>;
+			capacity-dmips-mhz = <1024>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
 
 		cpu_p1: cpu@10005 {
 			compatible = "apple,monsoon";
 			reg = <0x0 0x10005>;
 			cpu-release-addr = <0 0>; /* To be filled by loader */
+			performance-domains = <&cpufreq_p>;
+			operating-points-v2 = <&monsoon_opp>;
+			capacity-dmips-mhz = <1024>;
 			enable-method = "spin-table";
 			device_type = "cpu";
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x10000>;
+			d-cache-size = <0x10000>;
 		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x800000>;
+		};
+	};
+
+	mistral_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <1800>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <453000000>;
+			opp-level = <2>;
+			clock-latency-ns = <140000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-level = <3>;
+			clock-latency-ns = <105000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <4>;
+			clock-latency-ns = <115000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1272000000>;
+			opp-level = <5>;
+			clock-latency-ns = <125000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1572000000>;
+			opp-level = <6>;
+			clock-latency-ns = <135000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp07 {
+			opp-hz = /bits/ 64 <1680000000>;
+			opp-level = <7>;
+			clock-latency-ns = <135000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	monsoon_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-level = <1>;
+			clock-latency-ns = <1400>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <453000000>;
+			opp-level = <2>;
+			clock-latency-ns = <140000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <853000000>;
+			opp-level = <3>;
+			clock-latency-ns = <110000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <4>;
+			clock-latency-ns = <110000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1812000000>;
+			opp-level = <5>;
+			clock-latency-ns = <125000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <6>;
+			clock-latency-ns = <130000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-level = <7>;
+			clock-latency-ns = <140000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp08 {
+			opp-hz = /bits/ 64 <2376000000>;
+			opp-level = <8>;
+			clock-latency-ns = <140000>;
+			turbo-mode;
+		};
+#endif
 	};
 
 	soc {
@@ -110,6 +254,74 @@
 		nonposted-mmio;
 		ranges;
 
+		cpufreq_e: performance-controller@208e20000 {
+			compatible = "apple,t8015-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x08e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: performance-controller@208ea0000 {
+			compatible = "apple,t8015-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x08ea0000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		i2c0: i2c@22e200000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e200000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@22e204000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e204000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@22e208000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e208000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@22e20c000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e20c000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		serial0: serial@22e600000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x2e600000 0x0 0x4000>;
@@ -119,6 +331,7 @@
 			/* Use the bootloader-enabled clocks for now. */
 			clocks = <&clkref>, <&clkref>;
 			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
 			status = "disabled";
 		};
 
@@ -127,11 +340,28 @@
 			reg = <0x2 0x32100000 0x0 0x8000>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+			power-domains = <&ps_aic>;
+		};
+
+		pmgr: power-management@232000000 {
+			compatible = "apple,t8015-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x32000000 0 0x8c000>;
+		};
+
+		dwi_bl: backlight@232200080 {
+			compatible = "apple,t8015-dwi-bl", "apple,dwi-bl";
+			reg = <0x2 0x32200080 0x0 0x8>;
+			power-domains = <&ps_dwi>;
+			status = "disabled";
 		};
 
 		pinctrl_ap: pinctrl@233100000 {
 			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x33100000 0x0 0x1000>;
+			power-domains = <&ps_gpio>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -148,6 +378,26 @@
 				     <AIC_IRQ 54 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 55 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 56 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(73, 1)>,
+					 <APPLE_PINMUX(72, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(182, 1)>,
+					 <APPLE_PINMUX(181, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(4, 1)>,
+					 <APPLE_PINMUX(3, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(184, 1)>,
+					 <APPLE_PINMUX(183, 1)>;
+			};
 		};
 
 		pinctrl_aop: pinctrl@2340f0000 {
@@ -171,6 +421,13 @@
 				     <AIC_IRQ 141 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		spmi: spmi@235180700 {
+			compatible = "apple,t8015-spmi", "apple,t8103-spmi";
+			reg = <0x2 0x35180700 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
 		pinctrl_nub: pinctrl@2351f0000 {
 			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x351f0000 0x0 0x4000>;
@@ -188,6 +445,14 @@
 				     <AIC_IRQ 170 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pmgr_mini: power-management@235200000 {
+			compatible = "apple,t8015-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0x2 0x35200000 0 0x84000>;
+		};
+
 		wdt: watchdog@2352b0000 {
 			compatible = "apple,t8015-wdt", "apple,wdt";
 			reg = <0x2 0x352b0000 0x0 0x4000>;
@@ -221,6 +486,40 @@
 			 */
 			status = "disabled";
 		};
+
+		ans_mbox: mbox@257008000 {
+			compatible = "apple,t8015-asc-mailbox";
+			reg = <0x2 0x57008000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 265 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 266 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 267 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans2>;
+		};
+
+		sart: iommu@259c50000 {
+			compatible = "apple,t8015-sart";
+			reg = <0x2 0x59c50000 0x0 0x10000>;
+			power-domains = <&ps_ans2>;
+		};
+
+		nvme@259cc0000 {
+			compatible = "apple,t8015-nvme-ans2";
+			reg = <0x2 0x59cc0000 0x0 0x40000>,
+				<0x2 0x59d20000 0x0 0x2000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans2>, <&ps_pcie>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans2>;
+		};
 	};
 
 	timer {
@@ -232,3 +531,5 @@
 			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
+
+#include "t8015-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
index 56b0c67bfcda..5b3c42e9f0e6 100644
--- a/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -17,6 +17,14 @@
 	compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
 	model = "Apple MacBook Pro (13-inch, M1, 2020)";
 
+	/*
+	 * All of those are used by the bootloader to pass calibration
+	 * blobs and other device-specific properties
+	 */
+	aliases {
+		touchbar0 = &touchbar0;
+	};
+
 	led-controller {
 		compatible = "pwm-leds";
 		led-0 {
@@ -49,3 +57,65 @@
 &fpwm1 {
 	status = "okay";
 };
+
+&spi0 {
+	cs-gpios = <&pinctrl_ap 109 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	touchbar0: touchbar@0 {
+		compatible = "apple,j293-touchbar";
+		reg = <0>;
+		spi-max-frequency = <11500000>;
+		spi-cs-setup-delay-ns = <2000>;
+		spi-cs-hold-delay-ns = <2000>;
+		reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>;
+		firmware-name = "apple/dfrmtfw-j293.bin";
+		touchscreen-size-x = <23045>;
+		touchscreen-size-y = <640>;
+		touchscreen-inverted-y;
+	};
+};
+
+/*
+ * The driver depends on boot loader initialized state which resets when this
+ * power-domain is powered off. This happens on suspend or when the driver is
+ * missing during boot. Mark the domain as always on until the driver can
+ * handle this.
+ */
+&ps_dispdfr_be {
+	apple,always-on;
+};
+
+&display_dfr {
+	status = "okay";
+};
+
+&dfr_mipi_out {
+	dfr_mipi_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&dfr_panel_in>;
+	};
+};
+
+&displaydfr_mipi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dfr_panel: panel@0 {
+		compatible = "apple,j293-summit", "apple,summit";
+		reg = <0>;
+		max-brightness = <255>;
+
+		port {
+			dfr_panel_in: endpoint {
+				remote-endpoint = <&dfr_mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&displaydfr_dart {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
index 152f95fd49a2..7089ccf3ce55 100644
--- a/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -21,6 +21,14 @@
 	};
 };
 
+/*
+ * Adjust pcie0's iommu-map to account for the disabled port01.
+ */
+&pcie0 {
+	iommu-map = <0x100 &pcie0_dart_0 1 1>,
+			<0x200 &pcie0_dart_2 1 1>;
+};
+
 &bluetooth0 {
 	brcm,board-type = "apple,santorini";
 };
@@ -36,10 +44,10 @@
  */
 
 &port02 {
-	bus-range = <3 3>;
+	bus-range = <2 2>;
 	status = "okay";
 	ethernet0: ethernet@0,0 {
-		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 00];
 	};
diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index 5988a4eb6efa..0c8206156bfe 100644
--- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -71,7 +71,7 @@
  */
 &port00 {
 	bus-range = <1 1>;
-	wifi0: network@0,0 {
+	wifi0: wifi@0,0 {
 		compatible = "pci14e4,4425";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
@@ -90,3 +90,5 @@
 &nco_clkref {
 	clock-frequency = <900000000>;
 };
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
index 9645861a858c..c41c57d63997 100644
--- a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
@@ -387,6 +387,15 @@
 		power-domains = <&ps_sio>, <&ps_spi_p>;
 	};
 
+	ps_spi4: power-controller@260 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi4";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
 	ps_uart_n: power-controller@268 {
 		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
 		reg = <0x268 4>;
@@ -558,15 +567,6 @@
 		apple,always-on; /* Memory controller */
 	};
 
-	ps_spi4: power-controller@260 {
-		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
-		reg = <0x260 4>;
-		#power-domain-cells = <0>;
-		#reset-cells = <0>;
-		label = "spi4";
-		power-domains = <&ps_sio>, <&ps_spi_p>;
-	};
-
 	ps_dcs0: power-controller@300 {
 		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
 		reg = <0x300 4>;
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 9b0dad6b6184..8b7b27887968 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	compatible = "apple,t8103", "apple,arm-platform";
@@ -18,6 +19,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpu = &gpu;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -326,6 +331,20 @@
 		clock-output-names = "clkref";
 	};
 
+	clk_120m: clock-120m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "clk_120m";
+	};
+
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
 	/*
 	 * This is a fabulated representation of the input clock
 	 * to NCO since we don't know the true clock tree.
@@ -336,6 +355,36 @@
 		clock-output-names = "nco_ref";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -344,6 +393,34 @@
 		ranges;
 		nonposted-mmio;
 
+		gpu: gpu@206400000 {
+			compatible = "apple,agx-g13g";
+			reg = <0x2 0x6400000 0 0x40000>,
+				<0x2 0x4000000 0 0x1000000>;
+			reg-names = "asc", "sgx";
+			mboxes = <&agx_mbox>;
+			power-domains = <&ps_gfx>;
+			memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+					<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+			memory-region-names = "ttbs", "pagetables", "handoff",
+					      "hw-cal-a", "hw-cal-b", "globals";
+
+			apple,firmware-abi = <0 0 0>;
+		};
+
+		agx_mbox: mbox@206408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x6408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 575 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 576 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 577 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 578 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		cpufreq_e: performance-controller@210e20000 {
 			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
 			reg = <0x2 0x10e20000 0 0x1000>;
@@ -356,6 +433,65 @@
 			#performance-domain-cells = <0>;
 		};
 
+		display_dfr: display-pipe@228200000 {
+			compatible = "apple,t8103-display-pipe", "apple,h7-display-pipe";
+			reg = <0x2 0x28200000 0x0 0xc000>,
+			      <0x2 0x28400000 0x0 0x4000>;
+			reg-names = "be", "fe";
+			power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 506 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "be", "fe";
+			iommus = <&displaydfr_dart 0>;
+			status = "disabled";
+
+			port {
+				dfr_adp_out_mipi: endpoint {
+					remote-endpoint = <&dfr_mipi_in_adp>;
+				};
+			};
+		};
+
+		displaydfr_dart: iommu@228304000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x2 0x28304000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 504 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_dispdfr_fe>;
+			status = "disabled";
+		};
+
+		displaydfr_mipi: dsi@228600000 {
+			compatible = "apple,t8103-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+			reg = <0x2 0x28600000 0x0 0x100000>;
+			power-domains = <&ps_mipi_dsi>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dfr_mipi_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dfr_mipi_in_adp: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dfr_adp_out_mipi>;
+					};
+				};
+
+				dfr_mipi_out: port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
 		sio_dart: iommu@235004000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x2 0x35004000 0x0 0x4000>;
@@ -441,6 +577,48 @@
 			status = "disabled";
 		};
 
+		spi0: spi@235100000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x35100000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 614 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_200m>;
+			pinctrl-0 = <&spi0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@235104000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x35104000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 615 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_200m>;
+			pinctrl-0 = <&spi1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@23510c000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x3510c000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 617 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_120m>;
+			pinctrl-0 = <&spi3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		serial0: serial@235200000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x35200000 0x0 0x1000>;
@@ -597,6 +775,26 @@
 					 <APPLE_PINMUX(134, 1)>;
 			};
 
+			spi0_pins: spi0-pins {
+				pinmux = <APPLE_PINMUX(67, 1)>, /* CLK */
+					<APPLE_PINMUX(68, 1)>,  /* MOSI */
+					<APPLE_PINMUX(69, 1)>;  /* MISO */
+			};
+
+			spi1_pins: spi1-pins {
+				pinmux = <APPLE_PINMUX(42, 1)>,
+					<APPLE_PINMUX(43, 1)>,
+					<APPLE_PINMUX(44, 1)>,
+					<APPLE_PINMUX(45, 1)>;
+			};
+
+			spi3_pins: spi3-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					<APPLE_PINMUX(47, 1)>,
+					<APPLE_PINMUX(48, 1)>,
+					<APPLE_PINMUX(49, 1)>;
+			};
+
 			pcie_pins: pcie-pins {
 				pinmux = <APPLE_PINMUX(150, 1)>,
 					 <APPLE_PINMUX(151, 1)>,
@@ -604,6 +802,63 @@
 			};
 		};
 
+		nub_spmi: spmi@23d0d9300 {
+			compatible = "apple,t8103-spmi", "apple,spmi";
+			reg = <0x2 0x3d0d9300 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			pmic1: pmic@f {
+				compatible = "apple,sera-pmic", "apple,spmi-nvmem";
+				reg = <0xf SPMI_USID>;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					boot_stage: boot-stage@9f01 {
+						reg = <0x9f01 0x1>;
+					};
+
+					boot_error_count: boot-error-count@9f02,0 {
+						reg = <0x9f02 0x1>;
+						bits = <0 4>;
+					};
+
+					panic_count: panic-count@9f02,4 {
+						reg = <0x9f02 0x1>;
+						bits = <4 4>;
+					};
+
+					boot_error_stage: boot-error-stage@9f03 {
+						reg = <0x9f03 0x1>;
+					};
+
+					shutdown_flag: shutdown-flag@9f0f,3 {
+						reg = <0x9f0f 0x1>;
+						bits = <3 1>;
+					};
+
+					fault_shadow: fault-shadow@a67b {
+						reg = <0xa67b 0x10>;
+					};
+
+					socd: socd@ab00 {
+						reg = <0xab00 0x400>;
+					};
+
+					pm_setting: pm-setting@d001 {
+						reg = <0xd001 0x1>;
+					};
+
+					rtc_offset: rtc-offset@d100 {
+						reg = <0xd100 0x6>;
+					};
+				};
+			};
+		};
+
 		pinctrl_nub: pinctrl@23d1f0000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3d1f0000 0x0 0x4000>;
@@ -641,6 +896,41 @@
 			interrupts = <AIC_IRQ 338 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		smc: smc@23e400000 {
+			compatible = "apple,t8103-smc", "apple,smc";
+			reg = <0x2 0x3e400000 0x0 0x4000>,
+				<0x2 0x3fe00000 0x0 0x100000>;
+			reg-names = "smc", "sram";
+			mboxes = <&smc_mbox>;
+
+			smc_gpio: gpio {
+				compatible = "apple,smc-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smc_reboot: reboot {
+				compatible = "apple,smc-reboot";
+				nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+					<&boot_error_count>, <&panic_count>;
+				nvmem-cell-names = "shutdown_flag", "boot_stage",
+					"boot_error_count", "panic_count";
+			};
+		};
+
+		smc_mbox: mbox@23e408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x3e408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 400 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 401 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 402 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 403 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		pinctrl_smc: pinctrl@23e820000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3e820000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/apple/t8112-j415.dts b/arch/arm64/boot/dts/apple/t8112-j415.dts
new file mode 100644
index 000000000000..b54e218e5384
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j415.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (15-inch, M2, 2023)
+ *
+ * target-type: J415
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j415", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Air (15-inch, M2, 2023)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,snake";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,snake";
+	};
+};
+
+&i2c0 {
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts
index 0ad908349f55..fb8ad7d4c65a 100644
--- a/arch/arm64/boot/dts/apple/t8112-j493.dts
+++ b/arch/arm64/boot/dts/apple/t8112-j493.dts
@@ -17,8 +17,13 @@
 	compatible = "apple,j493", "apple,t8112", "apple,arm-platform";
 	model = "Apple MacBook Pro (13-inch, M2, 2022)";
 
+	/*
+	 * All of those are used by the bootloader to pass calibration
+	 * blobs and other device-specific properties
+	 */
 	aliases {
 		bluetooth0 = &bluetooth0;
+		touchbar0 = &touchbar0;
 		wifi0 = &wifi0;
 	};
 
@@ -36,6 +41,49 @@
 };
 
 /*
+ * The driver depends on boot loader initialized state which resets when this
+ * power-domain is powered off. This happens on suspend or when the driver is
+ * missing during boot. Mark the domain as always on until the driver can
+ * handle this.
+ */
+&ps_dispdfr_be {
+	apple,always-on;
+};
+
+&display_dfr {
+	status = "okay";
+};
+
+&dfr_mipi_out {
+	dfr_mipi_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&dfr_panel_in>;
+	};
+};
+
+&displaydfr_mipi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dfr_panel: panel@0 {
+		compatible = "apple,j493-summit", "apple,summit";
+		reg = <0>;
+		max-brightness = <255>;
+
+		port {
+			dfr_panel_in: endpoint {
+				remote-endpoint = <&dfr_mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&displaydfr_dart {
+	status = "okay";
+};
+
+/*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
  * (such as MAC addresses).
@@ -67,3 +115,21 @@
 &fpwm1 {
 	status = "okay";
 };
+
+&spi3 {
+	status = "okay";
+
+	touchbar0: touchbar@0 {
+		compatible = "apple,j493-touchbar";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+		spi-cs-setup-delay-ns = <2000>;
+		spi-cs-hold-delay-ns = <2000>;
+		reset-gpios = <&pinctrl_ap 170 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&pinctrl_ap 174 IRQ_TYPE_EDGE_FALLING>;
+		firmware-name = "apple/dfrmtfw-j493.bin";
+		touchscreen-size-x = <23045>;
+		touchscreen-size-y = <640>;
+		touchscreen-inverted-y;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
index f5edf61113e7..6da35496a4c8 100644
--- a/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
@@ -79,3 +79,5 @@
 &nco_clkref {
 	clock-frequency = <900000000>;
 };
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi
index 1666e6ab250b..3f79878b25af 100644
--- a/arch/arm64/boot/dts/apple/t8112.dtsi
+++ b/arch/arm64/boot/dts/apple/t8112.dtsi
@@ -19,6 +19,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpu = &gpu;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -349,6 +353,13 @@
 		clock-output-names = "clkref";
 	};
 
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
 	/*
 	 * This is a fabulated representation of the input clock
 	 * to NCO since we don't know the true clock tree.
@@ -359,6 +370,36 @@
 		clock-output-names = "nco_ref";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -367,6 +408,34 @@
 		ranges;
 		nonposted-mmio;
 
+		gpu: gpu@206400000 {
+			compatible = "apple,agx-g14g";
+			reg = <0x2 0x6400000 0 0x40000>,
+				<0x2 0x4000000 0 0x1000000>;
+			reg-names = "asc", "sgx";
+			mboxes = <&agx_mbox>;
+			power-domains = <&ps_gfx>;
+			memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+					<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+			memory-region-names = "ttbs", "pagetables", "handoff",
+					      "hw-cal-a", "hw-cal-b", "globals";
+
+			apple,firmware-abi = <0 0 0>;
+		};
+
+		agx_mbox: mbox@206408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x6408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 709 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 710 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 711 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 712 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		cpufreq_e: cpufreq@210e20000 {
 			compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
 			reg = <0x2 0x10e20000 0 0x1000>;
@@ -379,6 +448,65 @@
 			#performance-domain-cells = <0>;
 		};
 
+		display_dfr: display-pipe@228200000 {
+			compatible = "apple,t8112-display-pipe", "apple,h7-display-pipe";
+			reg = <0x2 0x28200000 0x0 0xc000>,
+			      <0x2 0x28400000 0x0 0x4000>;
+			reg-names = "be", "fe";
+			power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 614 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 618 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "be", "fe";
+			iommus = <&displaydfr_dart 0>;
+			status = "disabled";
+
+			port {
+				dfr_adp_out_mipi: endpoint {
+					remote-endpoint = <&dfr_mipi_in_adp>;
+				};
+			};
+		};
+
+		displaydfr_dart: iommu@228304000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x2 0x28304000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 616 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_dispdfr_fe>;
+			status = "disabled";
+		};
+
+		displaydfr_mipi: dsi@228600000 {
+			compatible = "apple,t8112-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+			reg = <0x2 0x28600000 0x0 0x100000>;
+			power-domains = <&ps_mipi_dsi>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dfr_mipi_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dfr_mipi_in_adp: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dfr_adp_out_mipi>;
+					};
+				};
+
+				dfr_mipi_out: port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
 		sio_dart: iommu@235004000 {
 			compatible = "apple,t8110-dart";
 			reg = <0x2 0x35004000 0x0 0x4000>;
@@ -467,6 +595,34 @@
 			status = "disabled";
 		};
 
+		spi1: spi@235104000 {
+			compatible = "apple,t8112-spi", "apple,spi";
+			reg = <0x2 0x35104000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 749 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_200m>;
+			pinctrl-0 = <&spi1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@23510c000 {
+			compatible = "apple,t8112-spi", "apple,spi";
+			reg = <0x2 0x3510c000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 751 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkref>;
+			pinctrl-0 = <&spi3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_spi3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled"; /* only used in J493 */
+		};
+
 		serial0: serial@235200000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x35200000 0x0 0x1000>;
@@ -626,13 +782,20 @@
 					 <APPLE_PINMUX(130, 1)>;
 			};
 
-			spi3_pins: spi3-pins {
+			spi1_pins: spi1-pins {
 				pinmux = <APPLE_PINMUX(46, 1)>,
 					<APPLE_PINMUX(47, 1)>,
 					<APPLE_PINMUX(48, 1)>,
 					<APPLE_PINMUX(49, 1)>;
 			};
 
+			spi3_pins: spi3-pins {
+				pinmux = <APPLE_PINMUX(93, 1)>,
+					<APPLE_PINMUX(94, 1)>,
+					<APPLE_PINMUX(95, 1)>,
+					<APPLE_PINMUX(96, 1)>;
+			};
+
 			pcie_pins: pcie-pins {
 				pinmux = <APPLE_PINMUX(162, 1)>,
 					 <APPLE_PINMUX(163, 1)>,
@@ -679,6 +842,98 @@
 			interrupts = <AIC_IRQ 379 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		nub_spmi: spmi@23d714000 {
+			compatible = "apple,t8112-spmi", "apple,spmi";
+			reg = <0x2 0x3d714000 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			pmic1: pmic@e {
+				compatible = "apple,stowe-pmic", "apple,spmi-nvmem";
+				reg = <0xe SPMI_USID>;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					fault_shadow: fault-shadow@867b {
+						reg = <0x867b 0x10>;
+					};
+
+					socd: socd@8b00 {
+						reg = <0x8b00 0x400>;
+					};
+
+					boot_stage: boot-stage@f701 {
+						reg = <0xf701 0x1>;
+					};
+
+					boot_error_count: boot-error-count@f702,0 {
+						reg = <0xf702 0x1>;
+						bits = <0 4>;
+					};
+
+					panic_count: panic-count@f702,4 {
+						reg = <0xf702 0x1>;
+						bits = <4 4>;
+					};
+
+					boot_error_stage: boot-error-stage@f703 {
+						reg = <0xf703 0x1>;
+					};
+
+					shutdown_flag: shutdown-flag@f70f,3 {
+						reg = <0xf70f 0x1>;
+						bits = <3 1>;
+					};
+
+					pm_setting: pm-setting@f801 {
+						reg = <0xf801 0x1>;
+					};
+
+					rtc_offset: rtc-offset@f900 {
+						reg = <0xf900 0x6>;
+					};
+				};
+			};
+		};
+
+		smc: smc@23e400000 {
+			compatible = "apple,t8112-smc", "apple,smc";
+			reg = <0x2 0x3e400000 0x0 0x4000>,
+				<0x2 0x3fe00000 0x0 0x100000>;
+			reg-names = "smc", "sram";
+			mboxes = <&smc_mbox>;
+
+			smc_gpio: gpio {
+				compatible = "apple,smc-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smc_reboot: reboot {
+				compatible = "apple,smc-reboot";
+				nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+					<&boot_error_count>, <&panic_count>;
+				nvmem-cell-names = "shutdown_flag", "boot_stage",
+					"boot_error_count", "panic_count";
+			};
+		};
+
+		smc_mbox: mbox@23e408000 {
+			compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x3e408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 499 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 500 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 501 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		pinctrl_smc: pinctrl@23e820000 {
 			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3e820000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index d908e96d7ddc..f30ee045dc95 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -7,3 +7,4 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += morello-sdp.dtb morello-fvp.dtb
diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
index abd013562995..66ba6b027193 100644
--- a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
+++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
@@ -49,3 +49,29 @@
 		clock-names = "smclk", "apb_pclk";
 	};
 };
+
+&cpus {
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a35";
+		reg = <0x1>;
+		enable-method = "psci";
+		next-level-cache = <&L2_0>;
+	};
+
+	cpu2: cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a35";
+		reg = <0x2>;
+		enable-method = "psci";
+		next-level-cache = <&L2_0>;
+	};
+
+	cpu3: cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a35";
+		reg = <0x3>;
+		enable-method = "psci";
+		next-level-cache = <&L2_0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi
index bb9b96fb5314..f35a5c96f3da 100644
--- a/arch/arm64/boot/dts/arm/corstone1000.dtsi
+++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi
@@ -21,7 +21,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -29,6 +29,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a35";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 		};
 	};
@@ -108,7 +109,6 @@
 			reg = <0x1a220000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			clock-frequency = <50000000>;
 			ranges;
 
 			frame@1a230000 {
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 083be35495b3..a4b2b78d4df3 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -77,7 +77,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <100000000>;
 	};
 
 	pmu {
diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index 19973ab4ea6b..68a69f17e93d 100644
--- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -44,6 +44,30 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <40>;
+				exit-latency-us = <100>;
+				min-residency-us = <150>;
+				status = "disabled";
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2500>;
+				status = "disabled";
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
@@ -56,6 +80,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu1: cpu@100 {
 			device_type = "cpu";
@@ -69,6 +94,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu2: cpu@200 {
 			device_type = "cpu";
@@ -82,6 +108,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu3: cpu@300 {
 			device_type = "cpu";
@@ -95,6 +122,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C0_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu4: cpu@10000 {
 			device_type = "cpu";
@@ -108,6 +136,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu5: cpu@10100 {
 			device_type = "cpu";
@@ -121,6 +150,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu6: cpu@10200 {
 			device_type = "cpu";
@@ -134,6 +164,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu7: cpu@10300 {
 			device_type = "cpu";
@@ -147,6 +178,7 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <256>;
 			next-level-cache = <&C1_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		C0_L2: l2-cache0 {
 			compatible = "cache";
@@ -169,7 +201,7 @@
 
 	memory@80000000 {
 		device_type = "memory";
-		reg = <0x00000000 0x80000000 0 0x80000000>,
+		reg = <0x00000000 0x80000000 0 0x7c000000>,
 		      <0x00000008 0x80000000 0 0x80000000>;
 	};
 
@@ -217,6 +249,19 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	timer@2a810000 {
+		compatible = "arm,armv7-timer-mem";
+		reg = <0x0 0x2a810000 0x0 0x10000>;
+		ranges = <0 0x0 0x2a820000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		frame@2a830000 {
+			frame-number = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x10000 0x10000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -227,13 +272,67 @@
 		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	ete-0 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu0>;
+		status = "disabled";
+	};
+
+	ete-1 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu1>;
+		status = "disabled";
+	};
+
+	ete-2 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu2>;
+		status = "disabled";
+	};
+
+	ete-3 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu3>;
+		status = "disabled";
+	};
+
+	ete-4 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu4>;
+		status = "disabled";
+	};
+
+	ete-5 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu5>;
+		status = "disabled";
+	};
+
+	ete-6 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu6>;
+		status = "disabled";
+	};
+
+	ete-7 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu7>;
+		status = "disabled";
+	};
+
+	trbe {
+		compatible = "arm,trace-buffer-extension";
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
 	pci: pci@40000000 {
 		#address-cells = <0x3>;
 		#size-cells = <0x2>;
 		#interrupt-cells = <0x1>;
 		compatible = "pci-host-ecam-generic";
 		device_type = "pci";
-		bus-range = <0x0 0x1>;
+		bus-range = <0x0 0xff>;
 		reg = <0x0 0x40000000 0x0 0x10000000>;
 		ranges = <0x2000000 0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>;
 		interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 055764d0b9e5..9ccb80821bdb 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -10,7 +10,6 @@
 	memtimer: timer@2a810000 {
 		compatible = "arm,armv7-timer-mem";
 		reg = <0x0 0x2a810000 0x0 0x10000>;
-		clock-frequency = <50000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x0 0x2a820000 0x20000>;
diff --git a/arch/arm64/boot/dts/arm/morello-fvp.dts b/arch/arm64/boot/dts/arm/morello-fvp.dts
new file mode 100644
index 000000000000..2072c0b72325
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello-fvp.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021-2024, Arm Limited. All rights reserved.
+ */
+
+/dts-v1/;
+#include "morello.dtsi"
+
+/ {
+	model = "Arm Morello Fixed Virtual Platform";
+	compatible = "arm,morello-fvp", "arm,morello";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bp_refclock24mhz: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "bp:clock24mhz";
+	};
+
+	block_0: virtio_block@1c170000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c170000 0x0 0x200>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	net_0: virtio_net@1c180000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c180000 0x0 0x200>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rng_0: virtio_rng@1c190000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c190000 0x0 0x200>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	p9_0: virtio_p9@1c1a0000 {
+		compatible = "virtio,mmio";
+		reg = <0x0 0x1c1a0000 0x0 0x200>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	kmi_0: kmi@1c150000 {
+		compatible = "arm,pl050", "arm,primecell";
+		reg = <0x0 0x1c150000 0x0 0x1000>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bp_refclock24mhz>, <&bp_refclock24mhz>;
+		clock-names = "KMIREFCLK", "apb_pclk";
+	};
+
+	kmi_1: kmi@1c160000 {
+		compatible = "arm,pl050", "arm,primecell";
+		reg = <0x0 0x1c160000 0x0 0x1000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bp_refclock24mhz>, <&bp_refclock24mhz>;
+		clock-names = "KMIREFCLK", "apb_pclk";
+	};
+
+	eth_0: ethernet@1d100000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x0 0x1d100000 0x0 0x10000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/morello-sdp.dts b/arch/arm64/boot/dts/arm/morello-sdp.dts
new file mode 100644
index 000000000000..cee49dee7571
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello-sdp.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021-2024, Arm Limited. All rights reserved.
+ */
+
+/dts-v1/;
+#include "morello.dtsi"
+
+/ {
+	model = "Arm Morello System Development Platform";
+	compatible = "arm,morello-sdp", "arm,morello";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dpu_aclk: clock-350000000 {
+		/* 77.1 MHz derived from 24 MHz reference clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <350000000>;
+		clock-output-names = "aclk";
+	};
+
+	dpu_pixel_clk: clock-148500000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+		clock-output-names = "pxclk";
+	};
+
+	i2c0: i2c@1c0f0000 {
+		compatible = "cdns,i2c-r1p14";
+		reg = <0x0 0x1c0f0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&dpu_aclk>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clock-frequency = <100000>;
+
+		hdmi_tx: hdmi-transmitter@70 {
+			compatible = "nxp,tda998x";
+			reg = <0x70>;
+			video-ports = <0x234501>;
+			port {
+				tda998x_0_input: endpoint {
+					remote-endpoint = <&dp_pl0_out0>;
+				};
+			};
+		};
+	};
+
+	dp0: display@2cc00000 {
+		compatible = "arm,mali-d32", "arm,mali-d71";
+		reg = <0x0 0x2cc00000 0x0 0x20000>;
+		interrupts = <0 69 4>;
+		clocks = <&dpu_aclk>;
+		clock-names = "aclk";
+		iommus = <&smmu_dp 0>, <&smmu_dp 1>, <&smmu_dp 2>, <&smmu_dp 3>,
+			 <&smmu_dp 8>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pl0: pipeline@0 {
+			reg = <0>;
+			clocks = <&dpu_pixel_clk>;
+			clock-names = "pxclk";
+			port {
+				dp_pl0_out0: endpoint {
+					remote-endpoint = <&tda998x_0_input>;
+				};
+			};
+		};
+	};
+
+	smmu_ccix: iommu@4f000000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0x4f000000 0x0 0x40000>;
+
+		interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 230 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+		msi-parent = <&its1 0>;
+		#iommu-cells = <1>;
+		dma-coherent;
+	};
+
+	smmu_pcie: iommu@4f400000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0x4f400000 0x0 0x40000>;
+
+		interrupts = <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 237 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+		msi-parent = <&its2 0>;
+		#iommu-cells = <1>;
+		dma-coherent;
+	};
+
+	pcie_ctlr: pcie@28c0000000 {
+		device_type = "pci";
+		compatible = "pci-host-ecam-generic";
+		reg = <0x28 0xC0000000 0 0x10000000>;
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x6f000000 0x00 0x00800000>,
+				<0x02000000 0x00 0x60000000 0x00 0x60000000 0x00 0x0f000000>,
+				<0x42000000 0x09 0x00000000 0x09 0x00000000 0x1f 0xc0000000>;
+		bus-range = <0 255>;
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 0 0 170 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 0 0 171 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 0 0 172 IRQ_TYPE_LEVEL_HIGH>;
+		msi-map = <0 &its_pcie 0 0x10000>;
+		iommu-map = <0 &smmu_pcie 0 0x10000>;
+	};
+
+	ccix_pcie_ctlr: pcie@4fc0000000 {
+		device_type = "pci";
+		compatible = "pci-host-ecam-generic";
+		reg = <0x4f 0xC0000000 0 0x10000000>;
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x7f000000 0x00 0x00800000>,
+				<0x02000000 0x00 0x70000000 0x00 0x70000000 0x00 0x0f000000>,
+				<0x42000000 0x30 0x00000000 0x30 0x00000000 0x1f 0xc0000000>;
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 0 0 201 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 0 0 202 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 0 0 203 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 0 0 204 IRQ_TYPE_LEVEL_HIGH>;
+		msi-map = <0 &its_ccix 0 0x10000>;
+		iommu-map = <0 &smmu_ccix 0 0x10000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/morello.dtsi b/arch/arm64/boot/dts/arm/morello.dtsi
new file mode 100644
index 000000000000..5bc1c725dc86
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello.dtsi
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2020-2024, Arm Limited. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc_refclk50mhz: clock-50000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	soc_refclk85mhz: clock-85000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <85000000>;
+		clock-output-names = "iofpga:aclk";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_0>;
+			clocks = <&scmi_dvfs 0>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_1>;
+			clocks = <&scmi_dvfs 0>;
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@10000 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x10000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_2>;
+			clocks = <&scmi_dvfs 1>;
+
+			l2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@10100 {
+			compatible = "arm,rainier";
+			reg = <0x0 0x10100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			/* 4 ways set associative */
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <512>;
+			next-level-cache = <&l2_3>;
+			clocks = <&scmi_dvfs 1>;
+
+			l2_3: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				/* 8 ways set associative */
+				cache-size = <0x100000>;
+				cache-line-size = <64>;
+				cache-sets = <2048>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x100000>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		interrupt-parent = <&gic>;
+
+		scmi {
+			compatible = "arm,scmi";
+			mbox-names = "tx", "rx";
+			mboxes = <&mailbox 1 0>, <&mailbox 1 1>;
+			shmem = <&cpu_scp_hpri0>, <&cpu_scp_hpri1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_dvfs: protocol@13 {
+				reg = <0x13>;
+				#clock-cells = <1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	/* The first bank of memory, memory map is actually provided by UEFI. */
+	memory@80000000 {
+		device_type = "memory";
+		/* [0x80000000-0xffffffff] */
+		reg = <0x00000000 0x80000000 0x0 0x7f000000>;
+	};
+
+	memory@8080000000 {
+		device_type = "memory";
+		/* [0x8080000000-0x83f7ffffff] */
+		reg = <0x00000080 0x80000000 0x3 0x78000000>;
+	};
+
+	pmu {
+		compatible = "arm,rainier-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-firmware@ff000000 {
+			reg = <0x0 0xff000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	spe-pmu {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		uart0: serial@2a400000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x2a400000 0x0 0x1000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&soc_refclk50mhz>, <&soc_refclk50mhz>;
+			clock-names = "uartclk", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@30000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x30000000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x300c0000 0x0 0x80000>;	/* GICR */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			its1: msi-controller@30040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x30040000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			its2: msi-controller@30060000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x30060000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			its_ccix: msi-controller@30080000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x30080000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			its_pcie: msi-controller@300a0000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x300a0000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		smmu_dp: iommu@2ce00000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0 0x2ce00000 0x0 0x40000>;
+
+			interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror", "cmdq-sync";
+			#iommu-cells = <1>;
+		};
+
+		mailbox: mhu@45000000 {
+			compatible = "arm,mhu-doorbell", "arm,primecell";
+			reg = <0x0 0x45000000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			clocks = <&soc_refclk50mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		sram: sram@6000000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x06000000 0x0 0x8000>;
+			ranges = <0 0x0 0x06000000 0x8000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cpu_scp_hpri0: scp-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x0 0x80>;
+			};
+
+			cpu_scp_hpri1: scp-sram@80 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x80 0x80>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 7f7226711d4b..a4a29193d4eb 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -116,7 +116,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <100000000>;
 	};
 
 	pmu {
diff --git a/arch/arm64/boot/dts/axiado/Makefile b/arch/arm64/boot/dts/axiado/Makefile
new file mode 100644
index 000000000000..6676ad07db61
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AXIADO) += ax3000-evk.dtb
diff --git a/arch/arm64/boot/dts/axiado/ax3000-evk.dts b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
new file mode 100644
index 000000000000..b86e96962557
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ax3000.dtsi"
+
+/ {
+	model = "Axiado AX3000 EVK";
+	compatible = "axiado,ax3000-evk", "axiado,ax3000";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* Cortex-A53 will use following memory map */
+		reg = <0x00000000 0x3d000000 0x00000000 0x23000000>,
+		      <0x00000004 0x00000000 0x00000000 0x80000000>;
+	};
+};
+
+/* GPIO bank 0 - 7 */
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&gpio6 {
+	status = "okay";
+};
+
+&gpio7 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/axiado/ax3000.dtsi b/arch/arm64/boot/dts/axiado/ax3000.dtsi
new file mode 100644
index 000000000000..792f52e0c7dd
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/ax3000.dtsi
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x3c0013a0 0x00000008;	/* cpu-release-addr */
+/ {
+	model = "Axiado AX3000";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-unified;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		clk_xin: clock-200000000 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+			clock-output-names = "clk_xin";
+		};
+
+		refclk: clock-125000000 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic500>;
+
+		gic500: interrupt-controller@80300000 {
+			compatible = "arm,gic-v3";
+			reg = <0x00 0x80300000 0x00 0x10000>,
+			      <0x00 0x80380000 0x00 0x80000>;
+			ranges;
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* GPIO Controller banks 0 - 7 */
+		gpio0: gpio-controller@80500000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80500000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio-controller@80580000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80580000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio2: gpio-controller@80600000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80600000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio3: gpio-controller@80680000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80680000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio4: gpio-controller@80700000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80700000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio5: gpio-controller@80780000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80780000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio6: gpio-controller@80800000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80800000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio7: gpio-controller@80880000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80880000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		/* I3C Controller 0 - 16 */
+		i3c0: i3c@80500400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80500400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c1: i3c@80500800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80500800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c2: i3c@80580400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80580400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c3: i3c@80580800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80580800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c4: i3c@80600400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80600400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c5: i3c@80600800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80600800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c6: i3c@80680400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80680400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c7: i3c@80680800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80680800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c8: i3c@80700400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80700400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c9: i3c@80700800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80700800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c10: i3c@80780400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80780400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c11: i3c@80780800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80780800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c12: i3c@80800400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80800400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c13: i3c@80800800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80800800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c14: i3c@80880400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80880400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c15: i3c@80880800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80880800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c16: i3c@80620400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80620400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		uart0: serial@80520000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80520000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart1: serial@805a0000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x805A0000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart2: serial@80620000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80620000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart3: serial@80520800 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80520800 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/blaize/Makefile b/arch/arm64/boot/dts/blaize/Makefile
new file mode 100644
index 000000000000..7e10b3199e6c
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0+
+dtb-$(CONFIG_ARCH_BLAIZE) += blaize-blzp1600-cb2.dtb
diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts b/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
new file mode 100644
index 000000000000..fb5415eb347a
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "blaize-blzp1600-som.dtsi"
+
+/ {
+	model = "Blaize BLZP1600 SoM1600P CB2 Development Board";
+
+	compatible = "blaize,blzp1600-cb2", "blaize,blzp1600";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	gpio_expander: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RSP_PIN_7",	/* GPIO_0 */
+				  "RSP_PIN_11",	/* GPIO_1 */
+				  "RSP_PIN_13",	/* GPIO_2 */
+				  "RSP_PIN_15",	/* GPIO_3 */
+				  "RSP_PIN_27",	/* GPIO_4 */
+				  "RSP_PIN_29",	/* GPIO_5 */
+				  "RSP_PIN_31",	/* GPIO_6 */
+				  "RSP_PIN_33",	/* GPIO_7 */
+				  "RSP_PIN_37",	/* GPIO_8 */
+				  "RSP_PIN_16",	/* GPIO_9 */
+				  "RSP_PIN_18",	/* GPIO_10 */
+				  "RSP_PIN_22",	/* GPIO_11 */
+				  "RSP_PIN_28",	/* GPIO_12 */
+				  "RSP_PIN_32",	/* GPIO_13 */
+				  "RSP_PIN_36",	/* GPIO_14 */
+				  "TP31";	/* GPIO_15 */
+	};
+
+	gpio_expander_m2: gpio@75 {
+		compatible = "ti,tca9539";
+		reg = <0x75>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "M2_W_DIS1_N",	/* GPIO_0 */
+				  "M2_W_DIS2_N",	/* GPIO_1 */
+				  "M2_UART_WAKE_N",	/* GPIO_2 */
+				  "M2_COEX3",		/* GPIO_3 */
+				  "M2_COEX_RXD",	/* GPIO_4 */
+				  "M2_COEX_TXD",	/* GPIO_5 */
+				  "M2_VENDOR_PIN40",	/* GPIO_6 */
+				  "M2_VENDOR_PIN42",	/* GPIO_7 */
+				  "M2_VENDOR_PIN38",	/* GPIO_8 */
+				  "M2_SDIO_RST_N",	/* GPIO_9 */
+				  "M2_SDIO_WAKE_N",	/* GPIO_10 */
+				  "M2_PETN1",		/* GPIO_11 */
+				  "M2_PERP1",		/* GPIO_12 */
+				  "M2_PERN1",		/* GPIO_13 */
+				  "UIM_SWP",		/* GPIO_14 */
+				  "UART1_TO_RSP";	/* GPIO_15 */
+	};
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names = "PERST_N",		/* GPIO_0 */
+			  "LM96063_ALERT_N",	/* GPIO_1 */
+			  "INA3221_PV",		/* GPIO_2 */
+			  "INA3221_CRIT",	/* GPIO_3 */
+			  "INA3221_WARN",	/* GPIO_4 */
+			  "INA3221_TC",		/* GPIO_5 */
+			  "QSPI0_RST_N",	/* GPIO_6 */
+			  "LM96063_TCRIT_N",	/* GPIO_7 */
+			  "DSI_TCH_INT",	/* GPIO_8 */
+			  "DSI_RST",		/* GPIO_9 */
+			  "DSI_BL",		/* GPIO_10 */
+			  "DSI_INT",		/* GPIO_11 */
+			  "ETH_RST",		/* GPIO_12 */
+			  "CSI0_RST",		/* GPIO_13 */
+			  "CSI0_PWDN",		/* GPIO_14 */
+			  "CSI1_RST",		/* GPIO_15 */
+			  "CSI1_PWDN",		/* GPIO_16 */
+			  "CSI2_RST",		/* GPIO_17 */
+			  "CSI2_PWDN",		/* GPIO_18 */
+			  "CSI3_RST",		/* GPIO_19 */
+			  "CSI3_PWDN",		/* GPIO_20 */
+			  "ADAC_RST",		/* GPIO_21 */
+			  "SD_SW_VDD",		/* GPIO_22 */
+			  "SD_PON_VDD",		/* GPIO_23 */
+			  "GPIO_EXP_INT",	/* GPIO_24 */
+			  "BOARD_ID_0",		/* GPIO_25 */
+			  "SDIO1_SW_VDD",	/* GPIO_26 */
+			  "SDIO1_PON_VDD",	/* GPIO_27 */
+			  "SDIO2_SW_VDD",	/* GPIO_28 */
+			  "SDIO2_PON_VDD",	/* GPIO_29 */
+			  "BOARD_ID_1",		/* GPIO_30 */
+			  "BOARD_ID_2";		/* GPIO_31 */
+};
diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi b/arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi
new file mode 100644
index 000000000000..bfdff5953edd
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+#include "blaize-blzp1600.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x1 0x0>;
+	};
+};
+
+/* i2c4 bus is available only on the SoM, not on the board */
+&i2c4 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi b/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
new file mode 100644
index 000000000000..5a6c882b2f57
--- /dev/null
+++ b/arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024 Blaize, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x82002000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			shmem = <&scmi0_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_rst: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* SCMI reserved buffer space on DDR space */
+		scmi0_shm: scmi-shmem@800 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x800 0x0 0x80>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = /* Physical Secure PPI */
+			     <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Physical Non-Secure PPI */
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Hypervisor PPI */
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     /* Virtual PPI */
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x3) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x2 0x0 0x850000>;
+
+		gic: interrupt-controller@410000 {
+			compatible = "arm,gic-400";
+			reg = <0x410000 0x20000>,
+			      <0x420000 0x20000>,
+			      <0x440000 0x20000>,
+			      <0x460000 0x20000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0x3) |
+						 IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		gpio0: gpio@4c0000 {
+			compatible = "blaize,blzp1600-gpio";
+			reg = <0x4c0000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		uart0: serial@4d0000 {
+			compatible = "ns16550a";
+			reg = <0x4d0000 0x1000>;
+			clocks = <&scmi_clk 59>;
+			resets = <&scmi_rst 59>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@4e0000 {
+			compatible = "ns16550a";
+			reg = <0x4e0000 0x1000>;
+			clocks = <&scmi_clk 60>;
+			resets = <&scmi_rst 60>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@4f0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x4f0000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 54>;
+			resets = <&scmi_rst 54>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@500000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x500000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 55>;
+			resets = <&scmi_rst 55>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@510000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x510000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 56>;
+			resets = <&scmi_rst 56>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@520000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x520000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 57>;
+			resets = <&scmi_rst 57>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@530000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x530000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 58>;
+			resets = <&scmi_rst 58>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc712: crypto@550000 {
+			compatible = "arm,cryptocell-712-ree";
+			reg = <0x550000 0x1000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 7>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 92565e9781ad..83d45afc6588 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -7,11 +7,15 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2711-rpi-4-b.dtb \
 			      bcm2711-rpi-cm4-io.dtb \
 			      bcm2712-rpi-5-b.dtb \
+			      bcm2712-rpi-5-b-ovl-rp1.dtb \
+			      bcm2712-d-rpi-5-b.dtb \
+			      bcm2837-rpi-2-b.dtb \
 			      bcm2837-rpi-3-a-plus.dtb \
 			      bcm2837-rpi-3-b.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
 			      bcm2837-rpi-cm3-io3.dtb \
-			      bcm2837-rpi-zero-2-w.dtb
+			      bcm2837-rpi-zero-2-w.dtb \
+			      rp1.dtbo
 
 subdir-y	+= bcmbca
 subdir-y	+= northstar2
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts
new file mode 100644
index 000000000000..7de24d60bcd1
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include "bcm2712-rpi-5-b.dts"
+
+&gio_aon {
+	brcm,gpio-bank-widths = <15 6>;
+
+	gpio-line-names =
+		"RP1_SDA", // AON_GPIO_00
+		"RP1_SCL", // AON_GPIO_01
+		"RP1_RUN", // AON_GPIO_02
+		"SD_IOVDD_SEL", // AON_GPIO_03
+		"SD_PWR_ON", // AON_GPIO_04
+		"SD_CDET_N", // AON_GPIO_05
+		"SD_FLG_N", // AON_GPIO_06
+		"", // AON_GPIO_07
+		"2712_WAKE", // AON_GPIO_08
+		"2712_STAT_LED", // AON_GPIO_09
+		"", // AON_GPIO_10
+		"", // AON_GPIO_11
+		"PMIC_INT", // AON_GPIO_12
+		"UART_TX_FS", // AON_GPIO_13
+		"UART_RX_FS", // AON_GPIO_14
+		"", // AON_GPIO_15
+		"", // AON_GPIO_16
+
+		// Pad bank0 out to 32 entries
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "", "",
+
+		"HDMI0_SCL", // AON_SGPIO_00
+		"HDMI0_SDA", // AON_SGPIO_01
+		"HDMI1_SCL", // AON_SGPIO_02
+		"HDMI1_SDA", // AON_SGPIO_03
+		"PMIC_SCL", // AON_SGPIO_04
+		"PMIC_SDA"; // AON_SGPIO_05
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
new file mode 100644
index 000000000000..04738bf281eb
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "bcm2712.dtsi"
+
+/ {
+	compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
+	model = "Raspberry Pi 5";
+
+	aliases {
+		serial10 = &uart10;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial10:115200n8";
+	};
+
+	clk_rp1_xosc: clock-50000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "rp1-xosc";
+		clock-frequency = <50000000>;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0 0x28000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_button_default>;
+		status = "okay";
+
+		power_button: power-button {
+			label = "pwr_button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gio 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+		};
+	};
+
+	sd_io_1v8_reg: sd-io-1v8-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
+		states = <1800000 1>,
+			 <3300000 0>;
+	};
+
+	sd_vcc_reg: sd-vcc-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	wl_on_reg: wl-on-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "wl-on-regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-0 = <&wl_on_default>;
+		pinctrl-names = "default";
+		gpio = <&gio 28 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <150000>;
+		enable-active-high;
+	};
+};
+
+&pinctrl {
+	bt_shutdown_default: bt-shutdown-default-state {
+		function = "gpio";
+		pins = "gpio29";
+	};
+
+	emmc_sd_default: emmc-sd-default-state {
+		pins = "emmc_cmd", "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3";
+		bias-pull-up;
+	};
+
+	pwr_button_default: pwr-button-default-state {
+		function = "gpio";
+		pins = "gpio20";
+		bias-pull-up;
+	};
+
+	sdio2_30_default: sdio2-30-default-state {
+		clk-pins {
+			function = "sd2";
+			pins = "gpio30";
+			bias-disable;
+		};
+		cmd-pins {
+			function = "sd2";
+			pins = "gpio31";
+			bias-pull-up;
+		};
+		dat-pins {
+			function = "sd2";
+			pins = "gpio32", "gpio33", "gpio34", "gpio35";
+			bias-pull-up;
+		};
+	};
+
+	uarta_24_default: uarta-24-default-state {
+		rts-pins {
+			function = "uart0";
+			pins = "gpio24";
+			bias-disable;
+		};
+		cts-pins {
+			function = "uart0";
+			pins = "gpio25";
+			bias-pull-up;
+		};
+		txd-pins {
+			function = "uart0";
+			pins = "gpio26";
+			bias-disable;
+		};
+		rxd-pins {
+			function = "uart0";
+			pins = "gpio27";
+			bias-pull-up;
+		};
+	};
+
+	wl_on_default: wl-on-default-state {
+		function = "gpio";
+		pins = "gpio28";
+	};
+};
+
+&pinctrl_aon {
+	emmc_aon_cd_default: emmc-aon-cd-default-state {
+		function = "sd_card_g";
+		pins = "aon_gpio5";
+		bias-pull-up;
+	};
+};
+
+/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
+ * labeled "UART", i.e. the interface with the system console.
+ */
+&uart10 {
+	status = "okay";
+};
+
+/* SDIO1 is used to drive the SD card */
+&sdio1 {
+	pinctrl-0 = <&emmc_sd_default>, <&emmc_aon_cd_default>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	cd-gpios = <&gio_aon 5 GPIO_ACTIVE_LOW>;
+};
+
+&sdio2 {
+	pinctrl-0 = <&sdio2_30_default>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	vmmc-supply = <&wl_on_reg>;
+	sd-uhs-ddr50;
+	non-removable;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&soc {
+	firmware: firmware {
+		compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mboxes = <&mailbox>;
+		dma-ranges;
+
+		firmware_clocks: clocks {
+			compatible = "raspberrypi,firmware-clocks";
+			#clock-cells = <1>;
+		};
+
+		reset: reset {
+			compatible = "raspberrypi,firmware-reset";
+			#reset-cells = <1>;
+		};
+	};
+
+	power: power {
+		compatible = "raspberrypi,bcm2835-power";
+		firmware = <&firmware>;
+		#power-domain-cells = <1>;
+	};
+};
+
+/* uarta communicates with the BT module */
+&uarta {
+	uart-has-rtscts;
+	pinctrl-0 = <&uarta_24_default &bt_shutdown_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
+	clock-names = "core", "disp";
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index 2bdbb6780242..3e0319fdb93f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -1,64 +1,68 @@
 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * bcm2712-rpi-5-b-ovl-rp1.dts is the overlay-ready DT which will make
+ * the RP1 driver to load the RP1 dtb overlay at runtime, while
+ * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it
+ * already contains RP1 node, so no overlay is loaded nor needed).
+ * This file is intended to host the override nodes for the RP1 peripherals,
+ * e.g. to declare the phy of the ethernet interface or the custom pin setup
+ * for several RP1 peripherals.
+ * This in turn is due to the fact that there's no current generic
+ * infrastructure to reference nodes (i.e. the nodes in rp1-common.dtsi) that
+ * are not yet defined in the DT since they are loaded at runtime via overlay.
+ * All other nodes that do not have anything to do with RP1 should be added
+ * to the included bcm2712-rpi-5-b-ovl-rp1.dts instead.
+ */
+
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include "bcm2712.dtsi"
+#include "bcm2712-rpi-5-b-ovl-rp1.dts"
 
 / {
-	compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
-	model = "Raspberry Pi 5";
-
 	aliases {
-		serial10 = &uart10;
+		ethernet0 = &rp1_eth;
 	};
+};
 
-	chosen: chosen {
-		stdout-path = "serial10:115200n8";
-	};
+&pcie2 {
+	#include "rp1-nexus.dtsi"
+};
 
-	/* Will be filled by the bootloader */
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0 0 0x28000000>;
-	};
+&rp1_eth {
+	assigned-clocks = <&rp1_clocks RP1_CLK_ETH_TSU>,
+			  <&rp1_clocks RP1_CLK_ETH>;
+	assigned-clock-rates = <50000000>,
+			       <125000000>;
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+
+	mdio {
+		reg = <0x1>;
+		reset-gpios = <&rp1_gpio 32 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <5000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	sd_io_1v8_reg: sd-io-1v8-reg {
-		compatible = "regulator-gpio";
-		regulator-name = "vdd-sd-io";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-settling-time-us = <5000>;
-		gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
-		states = <1800000 1>,
-			 <3300000 0>;
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
 	};
+};
 
-	sd_vcc_reg: sd-vcc-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc-sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		enable-active-high;
-		gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
+&rp1_gpio {
+	usb_vbus_default_state: usb-vbus-default-state {
+		function = "vbus1";
+		groups = "vbus1";
 	};
 };
 
-/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
- * labeled "UART", i.e. the interface with the system console.
- */
-&uart10 {
+&rp1_usb0 {
+	pinctrl-0 = <&usb_vbus_default_state>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
-/* SDIO1 is used to drive the SD card */
-&sdio1 {
-	vqmmc-supply = <&sd_io_1v8_reg>;
-	vmmc-supply = <&sd_vcc_reg>;
-	bus-width = <4>;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
-	sd-uhs-sdr104;
+&rp1_usb1 {
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 6e5a984c1d4e..205b87f557d6 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -38,6 +38,13 @@
 			clock-frequency = <200000000>;
 			clock-output-names = "emmc2-clock";
 		};
+
+		clk_sw_baud: clk-sw-baud {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <96000000>;
+			clock-output-names = "sw-baud";
+		};
 	};
 
 	cpus: cpus {
@@ -64,10 +71,10 @@
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l0>;
 
-			l2_cache_l0: l2-cache-l0 {
+			l2_cache_l0: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -88,10 +95,10 @@
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l1>;
 
-			l2_cache_l1: l2-cache-l1 {
+			l2_cache_l1: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -112,10 +119,10 @@
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l2>;
 
-			l2_cache_l2: l2-cache-l2 {
+			l2_cache_l2: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -136,10 +143,10 @@
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l3>;
 
-			l2_cache_l3: l2-cache-l3 {
+			l2_cache_l3: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
-				cache-line-size = <128>;
+				cache-line-size = <64>;
 				cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set
 				cache-level = <2>;
 				cache-unified;
@@ -192,6 +199,12 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		pcie_rescal: reset-controller@119500 {
+			compatible = "brcm,bcm7216-pcie-sata-rescal";
+			reg = <0x00119500 0x10>;
+			#reset-cells = <0>;
+		};
+
 		sdio1: mmc@fff000 {
 			compatible = "brcm,bcm2712-sdhci",
 				     "brcm,sdhci-brcmstb";
@@ -204,6 +217,12 @@
 			mmc-ddr-3_3v;
 		};
 
+		bcm_reset: reset-controller@1504318 {
+			compatible = "brcm,brcmstb-reset";
+			reg = <0x01504318 0x30>;
+			#reset-cells = <1>;
+		};
+
 		system_timer: timer@7c003000 {
 			compatible = "brcm,bcm2835-system-timer";
 			reg = <0x7c003000 0x1000>;
@@ -221,21 +240,49 @@
 			#mbox-cells = <0>;
 		};
 
-		local_intc: interrupt-controller@7cd00000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x7cd00000 0x100>;
-		};
-
 		uart10: serial@7d001000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x7d001000 0x200>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_uart>, <&clk_vpu>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
+		pinctrl: pinctrl@7d504100 {
+			compatible = "brcm,bcm2712c0-pinctrl";
+			reg = <0x7d504100 0x30>;
+		};
+
+		gio: gpio@7d508500 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x7d508500 0x40>;
+			interrupt-parent = <&main_irq>;
+			interrupts = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			brcm,gpio-bank-widths = <32 22>;
+		};
+
+		uarta: serial@7d50c000 {
+			compatible = "brcm,bcm7271-uart";
+			reg = <0x7d50c000 0x20>;
+			reg-names = "uart";
+			clocks = <&clk_sw_baud>;
+			clock-names = "sw_baud";
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart";
+			status = "disabled";
+		};
+
+		pinctrl_aon: pinctrl@7d510700 {
+			compatible = "brcm,bcm2712c0-aon-pinctrl";
+			reg = <0x7d510700 0x20>;
+		};
+
 		interrupt-controller@7d517000 {
 			compatible = "brcm,bcm7271-l2-intc";
 			reg = <0x7d517000 0x10>;
@@ -256,6 +303,21 @@
 			 */
 		};
 
+		sdio2: mmc@1100000 {
+			compatible = "brcm,bcm2712-sdhci",
+				     "brcm,sdhci-brcmstb";
+			reg = <0x01100000  0x260>,
+			      <0x01100400  0x200>;
+			reg-names = "host", "cfg";
+			interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_emmc2>;
+			clock-names = "sw_sdio";
+			sdhci-caps-mask = <0x0000C000 0x0>;
+			sdhci-caps = <0x0 0x0>;
+			mmc-ddr-3_3v;
+			status = "disabled";
+		};
+
 		gicv2: interrupt-controller@7fff9000 {
 			compatible = "arm,gic-400";
 			reg = <0x7fff9000 0x1000>,
@@ -263,8 +325,312 @@
 			      <0x7fffc000 0x2000>,
 			      <0x7fffe000 0x2000>;
 			interrupt-controller;
+			#address-cells = <0>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+					IRQ_TYPE_LEVEL_HIGH)>;
 			#interrupt-cells = <3>;
 		};
+
+		aon_intr: interrupt-controller@7d510600 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7d510600 0x30>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pixelvalve0: pixelvalve@7c410000 {
+			compatible = "brcm,bcm2712-pixelvalve0";
+			reg = <0x7c410000 0x100>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pixelvalve1: pixelvalve@7c411000 {
+			compatible = "brcm,bcm2712-pixelvalve1";
+			reg = <0x7c411000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		mop: mop@7c500000 {
+			compatible = "brcm,bcm2712-mop";
+			reg = <0x7c500000 0x28>;
+			interrupt-parent = <&disp_intr>;
+			interrupts = <1>;
+		};
+
+		moplet: moplet@7c501000 {
+			compatible = "brcm,bcm2712-moplet";
+			reg = <0x7c501000 0x20>;
+			interrupt-parent = <&disp_intr>;
+			interrupts = <0>;
+		};
+
+		disp_intr: interrupt-controller@7c502000 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7c502000 0x30>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		dvp: clock@7c700000 {
+			compatible = "brcm,brcm2711-dvp";
+			reg = <0x7c700000 0x10>;
+			clocks = <&clk_108MHz>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ddc0: i2c@7d508200 {
+			compatible = "brcm,brcmstb-i2c";
+			reg = <0x7d508200 0x58>;
+			interrupt-parent = <&bsc_irq>;
+			interrupts = <1>;
+			clock-frequency = <97500>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ddc1: i2c@7d508280 {
+			compatible = "brcm,brcmstb-i2c";
+			reg = <0x7d508280 0x58>;
+			interrupt-parent = <&bsc_irq>;
+			interrupts = <2>;
+			clock-frequency = <97500>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		bsc_irq: interrupt-controller@7d508380 {
+			compatible = "brcm,bcm7271-l2-intc";
+			reg = <0x7d508380 0x10>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		main_irq: interrupt-controller@7d508400 {
+			compatible = "brcm,bcm7271-l2-intc";
+			reg = <0x7d508400 0x10>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		hdmi0: hdmi@7c701400 {
+			compatible = "brcm,bcm2712-hdmi0";
+			reg = <0x7c701400 0x300>,
+			      <0x7c701000 0x200>,
+			      <0x7c701d00 0x300>,
+			      <0x7c702000 0x80>,
+			      <0x7c703800 0x200>,
+			      <0x7c704000 0x800>,
+			      <0x7c700100 0x80>,
+			      <0x7d510800 0x100>,
+			      <0x7c720000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			resets = <&dvp 1>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <1>, <2>, <3>,
+				     <7>, <8>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "hpd-connected", "hpd-removed";
+			ddc = <&ddc0>;
+		};
+
+		hdmi1: hdmi@7c706400 {
+			compatible = "brcm,bcm2712-hdmi1";
+			reg = <0x7c706400 0x300>,
+			      <0x7c706000 0x200>,
+			      <0x7c706d00 0x300>,
+			      <0x7c707000 0x80>,
+			      <0x7c708800 0x200>,
+			      <0x7c709000 0x800>,
+			      <0x7c700180 0x80>,
+			      <0x7d511000 0x100>,
+			      <0x7c720000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			resets = <&dvp 2>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <11>, <12>, <13>,
+				     <14>, <15>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "hpd-connected", "hpd-removed";
+			ddc = <&ddc1>;
+		};
+	};
+
+	axi: axi {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000  0x00 0x00000000  0x10 0x00000000>,
+			 <0x10 0x00000000  0x10 0x00000000  0x01 0x00000000>,
+			 <0x14 0x00000000  0x14 0x00000000  0x04 0x00000000>,
+			 <0x18 0x00000000  0x18 0x00000000  0x04 0x00000000>,
+			 <0x1c 0x00000000  0x1c 0x00000000  0x04 0x00000000>;
+
+		dma-ranges = <0x00 0x00000000  0x00 0x00000000  0x10 0x00000000>,
+			     <0x10 0x00000000  0x10 0x00000000  0x01 0x00000000>,
+			     <0x14 0x00000000  0x14 0x00000000  0x04 0x00000000>,
+			     <0x18 0x00000000  0x18 0x00000000  0x04 0x00000000>,
+			     <0x1c 0x00000000  0x1c 0x00000000  0x04 0x00000000>;
+
+		vc4: gpu {
+			compatible = "brcm,bcm2712-vc6";
+		};
+
+		pcie0: pcie@1000100000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00100000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			max-link-speed = <2>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 42>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x17 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x14 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 64GiB, 64-bit, prefetchable at PCIe 10_0000_0000 */
+				<0x43000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>;
+
+			status = "disabled";
+		};
+
+		pcie1: pcie@1000110000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00110000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			max-link-speed = <2>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 43>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&mip1>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1b 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x18 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 64GiB, 64-bit, non-prefetchable at PCIe 10_0000_0000 */
+				<0x03000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+				/* 4KiB, 64-bit, non-prefetchable at PCIe ff_ffff_f000 MIP1 */
+				<0x03000000 0xff 0xfffff000 0x10 0x00131000 0x00 0x00001000>;
+
+			status = "disabled";
+		};
+
+		pcie2: pcie@1000120000 {
+			compatible = "brcm,bcm2712-pcie";
+			reg = <0x10 0x00120000 0x00 0x9310>;
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			max-link-speed = <2>;
+			num-lanes = <4>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupt-parent = <&gicv2>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&pcie_rescal>, <&bcm_reset 44>;
+			reset-names = "rescal", "bridge";
+			msi-controller;
+			msi-parent = <&mip0>;
+
+			ranges =
+				/* ~4GiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1f 0x00000000 0x00 0xfffffffc>,
+				/* 12GiB, 64-bit, prefetchable at PCIe 04_0000_0000 */
+				<0x43000000 0x04 0x00000000 0x1c 0x00000000 0x03 0x00000000>;
+
+			dma-ranges =
+				/* 4MiB, 32-bit, non-prefetchable at PCIe 00_0000_0000 */
+				<0x02000000 0x00 0x00000000 0x1f 0x00000000 0x00 0x00400000>,
+				/* 64GiB, 64-bit, prefetchable at PCIe 10_0000_0000 */
+				<0x43000000 0x10 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+				/* 4KiB, 64-bit, non-prefetchable at PCIe ff_ffff_f000 MIP0 */
+				<0x03000000 0xff 0xfffff000 0x10 0x00130000 0x00 0x00001000>;
+
+			status = "disabled";
+		};
+
+		mip0: msi-controller@1000130000 {
+			compatible = "brcm,bcm2712-mip";
+			reg = <0x10 0x00130000 0x00 0xc0>,
+			      <0xff 0xfffff000 0x00 0x1000>;
+			msi-controller;
+			msi-ranges = <&gicv2 GIC_SPI 128 IRQ_TYPE_EDGE_RISING 64>;
+			brcm,msi-offset = <0>;
+		};
+
+		mip1: msi-controller@1000131000 {
+			compatible = "brcm,bcm2712-mip";
+			reg = <0x10 0x00131000 0x00 0xc0>,
+			      <0xff 0xfffff000 0x00 0x1000>;
+			msi-controller;
+			msi-ranges = <&gicv2 GIC_SPI 247 IRQ_TYPE_EDGE_RISING 8>;
+			brcm,msi-offset = <8>;
+		};
 	};
 
 	timer {
@@ -280,4 +646,26 @@
 			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) |
 					  IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	clk_27MHz: clk-27M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "27MHz-clock";
+	};
+
+	clk_108MHz: clk-108M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <108000000>;
+		clock-output-names = "108MHz-clock";
+	};
+
+	hvs: hvs@107c580000 {
+		compatible = "brcm,bcm2712-hvs";
+		reg = <0x10 0x7c580000 0x0 0x1a000>;
+		interrupt-parent = <&disp_intr>;
+		interrupts = <2>, <9>, <16>;
+		interrupt-names = "ch0-eof", "ch1-eof", "ch2-eof";
+	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts
new file mode 100644
index 000000000000..57742ed40049
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-2-b.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-2-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
index 27741b71ba9e..9a8461d91c8c 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ARCH_BCMBCA) += \
 				bcm4906-netgear-r8000p.dtb \
 				bcm4906-tplink-archer-c2300-v1.dtb \
+				bcm4906-zyxel-ex3510b.dtb \
 				bcm4908-asus-gt-ac5300.dtb \
 				bcm4908-netgear-raxe500.dtb \
 				bcm94908.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
index 999d93730240..a5f9ec92bd5e 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
@@ -144,16 +144,20 @@
 		#size-cells = <1>;
 
 		partition@0 {
-			compatible = "nvmem-cells";
 			label = "cferom";
 			reg = <0x0 0x100000>;
-
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0x100000>;
 
-			base_mac_addr: mac@106a0 {
-				reg = <0x106a0 0x6>;
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				base_mac_addr: mac@106a0 {
+					reg = <0x106a0 0x6>;
+				};
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts
new file mode 100644
index 000000000000..54e453bd09f7
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-zyxel-ex3510b.dts
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4906.dtsi"
+
+/ {
+	compatible = "zyxel,ex3510b", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
+	model = "Zyxel EX3510-B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		key-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		key-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&leds {
+	pinctrl-0 = <&pins_led_0_a>, <&pins_led_2_a>, <&pins_led_3_a>,
+		    <&pins_led_4_a>, <&pins_led_10_a>, <&pins_led_12_a>,
+		    <&pins_led_14_a>, <&pins_led_15_a>, <&pins_led_21_a>;
+	pinctrl-names = "default";
+
+	led@0 {
+		reg = <0x0>;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@2 {
+		reg = <0x2>;
+		function = LED_FUNCTION_WAN_ONLINE;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@3 {
+		reg = <0x3>;
+		function = LED_FUNCTION_WAN_ONLINE;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@4 {
+		reg = <0x4>;
+		function = LED_FUNCTION_USB;
+		color = <LED_COLOR_ID_GREEN>;
+		trigger-sources = <&ohci_port1>, <&ohci_port2>,
+				  <&ehci_port1>, <&ehci_port2>,
+				  <&xhci_port1>, <&xhci_port2>;
+		linux,default-trigger = "usbport";
+	};
+
+	led@a {
+		reg = <0xa>;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_GREEN>;
+		linux,default-trigger = "default-on";
+	};
+
+	led@c {
+		reg = <0xc>;
+		function = LED_FUNCTION_LAN;
+		color = <LED_COLOR_ID_GREEN>;
+		active-low;
+	};
+
+	led@e {
+		reg = <0xe>;
+		function = LED_FUNCTION_WPS;
+		color = <LED_COLOR_ID_GREEN>;
+		active-low;
+	};
+
+	led@f {
+		reg = <0xf>;
+		function = LED_FUNCTION_WPS;
+		color = <LED_COLOR_ID_RED>;
+		active-low;
+	};
+
+	led@15 {
+		reg = <0x15>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_GREEN>;
+		active-low;
+	};
+};
+
+&enet {
+	nvmem-cells = <&base_mac_addr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb_phy {
+	brcm,ioc = <1>;
+	brcm,ipp = <1>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan1";
+	};
+
+	port@1 {
+		label = "lan2";
+	};
+
+	port@2 {
+		label = "lan3";
+	};
+
+	port@3 {
+		label = "lan4";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+};
+
+&nandcs {
+	brcm,nand-oob-sector-size = <27>;
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "brcm,bcm4908-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			compatible = "nvmem-cells";
+			label = "cferom";
+			reg = <0x0 0x100000>;
+			read-only;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			base_mac_addr: mac@106a0 {
+				reg = <0x106a0 0x6>;
+			};
+		};
+
+		partition@100000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x100000 0x5f80000>;
+		};
+
+		partition@6080000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x6080000 0x5f80000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index 8b924812322c..3b7595fd4e81 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -30,7 +30,7 @@
 			compatible = "brcm,brahma-b53";
 			reg = <0x0>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
+			cpu-release-addr = <0x0 0xff8>;
 			next-level-cache = <&l2>;
 		};
 
@@ -39,7 +39,7 @@
 			compatible = "brcm,brahma-b53";
 			reg = <0x1>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
+			cpu-release-addr = <0x0 0xff8>;
 			next-level-cache = <&l2>;
 		};
 
@@ -48,7 +48,7 @@
 			compatible = "brcm,brahma-b53";
 			reg = <0x2>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
+			cpu-release-addr = <0x0 0xff8>;
 			next-level-cache = <&l2>;
 		};
 
@@ -57,7 +57,7 @@
 			compatible = "brcm,brahma-b53";
 			reg = <0x3>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0xfff8>;
+			cpu-release-addr = <0x0 0xff8>;
 			next-level-cache = <&l2>;
 		};
 
@@ -68,6 +68,16 @@
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cfe-stub@0 {
+			reg = <0x0 0x0 0x0 0x1000>;
+		};
+	};
+
 	axi@81000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -313,11 +323,12 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x00 0x00 0xff800000 0x3000>;
+		ranges = <0x00 0x00 0xff800000 0x400000>;
 
 		twd: timer-mfd@400 {
 			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
@@ -338,13 +349,103 @@
 			};
 		};
 
-		gpio0: gpio-controller@500 {
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
 			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x52c 0x04>;
 			reg-names = "dirout", "dat";
-			reg = <0x500 0x28>, <0x528 0x28>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
 
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
 			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
 			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x540 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x544 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 256 .. 287 */
+		gpio8: gpio@520 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x520 0x04>, <0x548 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 288 .. 319 */
+		gpio9: gpio@524 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x524 0x04>, <0x54c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
 		};
 
 		pinctrl@560 {
@@ -574,6 +675,12 @@
 			#size-cells = <0>;
 		};
 
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -626,6 +733,19 @@
 				#reset-cells = <1>;
 			};
 		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 
 	reboot {
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
index 48d618e75866..a441388c0cd2 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2022 Broadcom Ltd.
+ * This DTSI is for the B0 and later revision of the SoC
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -125,6 +126,101 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -151,6 +247,21 @@
 			};
 		};
 
+		/* B0 AHB Peripherals */
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		/* B0 ARM UART Peripheral block */
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
@@ -159,5 +270,23 @@
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
+
+		uart1: serial@13000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x13000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@14000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x14000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
index 00c62c1e5df0..dcbd0fdd33d2 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -93,11 +93,103 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0xff800000 0x800000>;
+		ranges = <0x0 0x0 0xff800000 0x400000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
 
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
@@ -108,6 +200,29 @@
 			status = "disabled";
 		};
 
+		uart1: serial@660 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x660 0x18>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -133,5 +248,18 @@
 				reg = <0>;
 			};
 		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
index caeaf428dc15..c105a734a648 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -111,11 +111,12 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0xff800000 0x62000>;
+		ranges = <0x0 0x0 0xff800000 0x400000>;
 
 		twd: timer-mfd@400 {
 			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
@@ -136,6 +137,86 @@
 			};
 		};
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x640 0x18>;
@@ -145,6 +226,29 @@
 			status = "disabled";
 		};
 
+		uart1: serial@660 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x660 0x18>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -170,5 +274,18 @@
 				reg = <0>;
 			};
 		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index f43cfe66b6af..5939d342aec7 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -137,7 +137,6 @@
 		spi-cpha;
 		spi-cpol;
 		pl022,interface = <0>;
-		pl022,slave-tx-disable = <0>;
 		pl022,com-mode = <0>;
 		pl022,rx-level-trig = <1>;
 		pl022,tx-level-trig = <1>;
@@ -200,7 +199,6 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index c50df1d02797..0e134a94e142 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -151,7 +151,6 @@
 		#size-cells = <1>;
 		compatible = "m25p80";
 		spi-max-frequency = <62500000>;
-		m25p,default-addr-width = <3>;
 		reg = <0x0 0x0>;
 
 		partition@0 {
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index cfd9fd23a1c2..9888a1fabd5c 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -134,7 +134,6 @@
 		brcm,pcie-ob;
 		brcm,pcie-ob-oarr-size;
 		brcm,pcie-ob-axi-offset = <0x00000000>;
-		brcm,pcie-ob-window-size = <256>;
 
 		status = "disabled";
 
@@ -165,7 +164,6 @@
 		brcm,pcie-ob;
 		brcm,pcie-ob-oarr-size;
 		brcm,pcie-ob-axi-offset = <0x30000000>;
-		brcm,pcie-ob-window-size = <256>;
 
 		status = "disabled";
 
@@ -369,7 +367,6 @@
 
 			v2m0: v2m@0 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x00000 0x1000>;
 				arm,msi-base-spi = <72>;
@@ -378,7 +375,6 @@
 
 			v2m1: v2m@10000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x10000 0x1000>;
 				arm,msi-base-spi = <88>;
@@ -387,7 +383,6 @@
 
 			v2m2: v2m@20000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x20000 0x1000>;
 				arm,msi-base-spi = <104>;
@@ -396,7 +391,6 @@
 
 			v2m3: v2m@30000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x30000 0x1000>;
 				arm,msi-base-spi = <120>;
@@ -405,7 +399,6 @@
 
 			v2m4: v2m@40000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x40000 0x1000>;
 				arm,msi-base-spi = <136>;
@@ -414,7 +407,6 @@
 
 			v2m5: v2m@50000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x50000 0x1000>;
 				arm,msi-base-spi = <152>;
@@ -423,7 +415,6 @@
 
 			v2m6: v2m@60000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x60000 0x1000>;
 				arm,msi-base-spi = <168>;
@@ -432,7 +423,6 @@
 
 			v2m7: v2m@70000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x70000 0x1000>;
 				arm,msi-base-spi = <184>;
diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
new file mode 100644
index 000000000000..5a815c379794
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
+
+pci_ep_bus: pci-ep-bus@1 {
+	compatible = "simple-bus";
+	ranges = <0x00 0x40000000  0x01 0x00 0x00000000  0x00 0x00400000>;
+	dma-ranges = <0x10 0x00000000  0x43000000 0x10 0x00000000  0x10 0x00000000>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	rp1_clocks: clocks@40018000 {
+		compatible = "raspberrypi,rp1-clocks";
+		reg = <0x00 0x40018000 0x0 0x10038>;
+		#clock-cells = <1>;
+		clocks = <&clk_rp1_xosc>;
+		assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
+				  <&rp1_clocks RP1_PLL_SYS>,
+				  <&rp1_clocks RP1_PLL_SYS_SEC>,
+				  <&rp1_clocks RP1_CLK_SYS>;
+		assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
+				       <200000000>,  // RP1_PLL_SYS
+				       <125000000>,  // RP1_PLL_SYS_SEC
+				       <200000000>;  // RP1_CLK_SYS
+	};
+
+	rp1_gpio: pinctrl@400d0000 {
+		compatible = "raspberrypi,rp1-gpio";
+		reg = <0x00 0x400d0000  0x0 0xc000>,
+		      <0x00 0x400e0000  0x0 0xc000>,
+		      <0x00 0x400f0000  0x0 0xc000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+			     <1 IRQ_TYPE_LEVEL_HIGH>,
+			     <2 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rp1_eth: ethernet@40100000 {
+		compatible = "raspberrypi,rp1-gem";
+		reg = <0x00 0x40100000  0x0 0x4000>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rp1_clocks RP1_CLK_SYS>,
+			 <&rp1_clocks RP1_CLK_SYS>,
+			 <&rp1_clocks RP1_CLK_ETH>,
+			 <&rp1_clocks RP1_CLK_ETH_TSU>;
+		clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	rp1_usb0: usb@40200000 {
+		compatible = "snps,dwc3";
+		reg = <0x00 0x40200000  0x0 0x100000>;
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+		dr_mode = "host";
+		usb3-lpm-capable;
+		snps,dis_rxdet_inp3_quirk;
+		snps,parkmode-disable-hs-quirk;
+		snps,parkmode-disable-ss-quirk;
+		snps,tx-max-burst = /bits/ 8 <8>;
+		snps,tx-thr-num-pkt = /bits/ 8 <2>;
+		status = "disabled";
+	};
+
+	rp1_usb1: usb@40300000 {
+		compatible = "snps,dwc3";
+		reg = <0x00 0x40300000  0x0 0x100000>;
+		interrupts = <36 IRQ_TYPE_EDGE_RISING>;
+		dr_mode = "host";
+		usb3-lpm-capable;
+		snps,dis_rxdet_inp3_quirk;
+		snps,parkmode-disable-hs-quirk;
+		snps,parkmode-disable-ss-quirk;
+		snps,tx-max-burst = /bits/ 8 <8>;
+		snps,tx-thr-num-pkt = /bits/ 8 <2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
new file mode 100644
index 000000000000..0ef30d7f1c35
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+rp1_nexus {
+	compatible = "pci1de4,1";
+	#address-cells = <3>;
+	#size-cells = <2>;
+	ranges = <0x01 0x00 0x00000000
+		  0x02000000 0x00 0x00000000
+		  0x0 0x400000>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	#include "rp1-common.dtsi"
+};
diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso
new file mode 100644
index 000000000000..ab4f146d22c0
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/rp1.dtso
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+&pcie2 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	#include "rp1-nexus.dtsi"
+};
diff --git a/arch/arm64/boot/dts/bst/Makefile b/arch/arm64/boot/dts/bst/Makefile
new file mode 100644
index 000000000000..4c1b8b4cdad8
--- /dev/null
+++ b/arch/arm64/boot/dts/bst/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BST) += bstc1200-cdcu1.0-adas_4c2g.dtb
diff --git a/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts b/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts
new file mode 100644
index 000000000000..5eb9ef369d8c
--- /dev/null
+++ b/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "bstc1200.dtsi"
+
+/ {
+	model = "BST C1200-96 CDCU1.0 4C2G";
+	compatible = "bst,c1200-cdcu1.0-adas-4c2g", "bst,c1200";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@810000000 {
+		device_type = "memory";
+		reg = <0x8 0x10000000 0x0 0x30000000>,
+		      <0x8 0xc0000000 0x1 0x0>,
+		      <0xc 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/bst/bstc1200.dtsi b/arch/arm64/boot/dts/bst/bstc1200.dtsi
new file mode 100644
index 000000000000..dd13c6bfc3c8
--- /dev/null
+++ b/arch/arm64/boot/dts/bst/bstc1200.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "bst,c1200";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_cache>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_cache>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_cache>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_cache>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic>;
+
+		uart0: serial@20008000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20008000 0x0 0x1000>;
+			clock-frequency = <25000000>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@32800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x32800000 0x0 0x10000>,
+			      <0x0 0x32880000 0x0 0x100000>;
+			ranges;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		always-on;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
index 6dfe78a7d4ab..966fb57280f3 100644
--- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
@@ -136,8 +136,8 @@
 			reg = <0x04 0x02020000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk125mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&clk125mhz>, <&clk125mhz>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/cix/Makefile b/arch/arm64/boot/dts/cix/Makefile
new file mode 100644
index 000000000000..ed3713982012
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb
diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
new file mode 100644
index 000000000000..4dee8cd0b86d
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "sky1.dtsi"
+#include "sky1-pinfunc.h"
+
+/ {
+	model = "Radxa Orion O6";
+	compatible = "radxa,orion-o6", "cix,sky1";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x28000000>;
+			linux,cma-default;
+		};
+	};
+
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hog-cfg {
+		pins {
+			pinmux = <CIX_PAD_GPIO144_FUNC_GPIO144>,
+				<CIX_PAD_GPIO145_FUNC_GPIO145>,
+				<CIX_PAD_GPIO146_FUNC_GPIO146>,
+				<CIX_PAD_GPIO147_FUNC_GPIO147>;
+			bias-pull-down;
+			drive-strength = <8>;
+		};
+	};
+};
+
+&iomuxc_s5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_s5>;
+
+	pinctrl_hog_s5: hog-s5-cfg {
+		pins {
+			pinmux = <CIX_PAD_GPIO014_FUNC_GPIO014>;
+			bias-pull-up;
+			drive-strength = <8>;
+
+		};
+	};
+};
+
+&pcie_x8_rc {
+	status = "okay";
+};
+
+&pcie_x4_rc {
+	status = "okay";
+};
+
+&pcie_x2_rc {
+	status = "okay";
+};
+
+&pcie_x1_0_rc {
+	status = "okay";
+};
+
+&pcie_x1_1_rc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/cix/sky1-pinfunc.h b/arch/arm64/boot/dts/cix/sky1-pinfunc.h
new file mode 100644
index 000000000000..ebe9f6fef403
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1-pinfunc.h
@@ -0,0 +1,401 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright 2024-2025 Cix Technology Group Co., Ltd.
+ */
+
+#ifndef __CIX_SKY1_H
+#define __CIX_SKY1_H
+
+/* s5 pads */
+#define CIX_PAD_GPIO001_FUNC_GPIO001				   (0 << 8 | 0x0)
+#define CIX_PAD_GPIO002_FUNC_GPIO002				   (1 << 8 | 0x0)
+#define CIX_PAD_GPIO003_FUNC_GPIO003				   (2 << 8 | 0x0)
+#define CIX_PAD_GPIO004_FUNC_GPIO004				   (3 << 8 | 0x0)
+#define CIX_PAD_GPIO005_FUNC_GPIO005				   (4 << 8 | 0x0)
+#define CIX_PAD_GPIO006_FUNC_GPIO006				   (5 << 8 | 0x0)
+#define CIX_PAD_GPIO007_FUNC_GPIO007				   (6 << 8 | 0x0)
+#define CIX_PAD_GPIO008_FUNC_GPIO008				   (7 << 8 | 0x0)
+#define CIX_PAD_GPIO009_FUNC_GPIO009				   (8 << 8 | 0x0)
+#define CIX_PAD_GPIO010_FUNC_GPIO010				   (9 << 8 | 0x0)
+#define CIX_PAD_GPIO011_FUNC_GPIO011				   (10 << 8 | 0x0)
+#define CIX_PAD_GPIO012_FUNC_GPIO012				   (11 << 8 | 0x0)
+#define CIX_PAD_GPIO013_FUNC_GPIO013				   (12 << 8 | 0x0)
+#define CIX_PAD_GPIO014_FUNC_GPIO014				   (13 << 8 | 0x0)
+#define CIX_PAD_SFI_I2C0_SCL_FUNC_SFI_I2C0_SCL			   (28 << 8 | 0x0)
+#define CIX_PAD_SFI_I2C0_SCL_FUNC_SFI_I3C0_SCL			   (28 << 8 | 0x1)
+#define CIX_PAD_SFI_I2C0_SDA_FUNC_SFI_I2C0_SDA			   (29 << 8 | 0x0)
+#define CIX_PAD_SFI_I2C0_SDA_FUNC_SFI_I3C0_SDA			   (29 << 8 | 0x1)
+#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_I2C1_SCL			   (30 << 8 | 0x0)
+#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_I3C1_SCL			   (30 << 8 | 0x1)
+#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_SPI_CS0			   (30 << 8 | 0x2)
+#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_I2C1_SDA			   (31 << 8 | 0x0)
+#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_I3C1_SDA			   (31 << 8 | 0x1)
+#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_SPI_CS1			   (31 << 8 | 0x2)
+#define CIX_PAD_SFI_GPIO0_FUNC_GPIO015				   (32 << 8 | 0x0)
+#define CIX_PAD_SFI_GPIO0_FUNC_SFI_SPI_SCK			   (32 << 8 | 0x1)
+#define CIX_PAD_SFI_GPIO0_FUNC_SFI_GPIO0			   (32 << 8 | 0x2)
+#define CIX_PAD_SFI_GPIO1_FUNC_GPIO016				   (33 << 8 | 0x0)
+#define CIX_PAD_SFI_GPIO1_FUNC_SFI_SPI_MOSI			   (33 << 8 | 0x1)
+#define CIX_PAD_SFI_GPIO1_FUNC_SFI_GPIO1			   (33 << 8 | 0x2)
+#define CIX_PAD_SFI_GPIO2_FUNC_GPIO017				   (34 << 8 | 0x0)
+#define CIX_PAD_SFI_GPIO2_FUNC_SFI_SPI_MISO			   (34 << 8 | 0x1)
+#define CIX_PAD_SFI_GPIO2_FUNC_SFI_GPIO2			   (34 << 8 | 0x2)
+#define CIX_PAD_GPIO018_FUNC_SFI_GPIO3				   (35 << 8 | 0x0)
+#define CIX_PAD_GPIO018_FUNC_GPIO018				   (35 << 8 | 0x1)
+#define CIX_PAD_GPIO019_FUNC_SFI_GPIO4				   (36 << 8 | 0x0)
+#define CIX_PAD_GPIO019_FUNC_GPIO019				   (36 << 8 | 0x1)
+#define CIX_PAD_GPIO020_FUNC_SFI_GPIO5				   (37 << 8 | 0x0)
+#define CIX_PAD_GPIO020_FUNC_GPIO020				   (37 << 8 | 0x1)
+#define CIX_PAD_GPIO021_FUNC_SFI_GPIO6				   (38 << 8 | 0x0)
+#define CIX_PAD_GPIO021_FUNC_GPIO021				   (38 << 8 | 0x1)
+#define CIX_PAD_GPIO022_FUNC_SFI_GPIO7				   (39 << 8 | 0x0)
+#define CIX_PAD_GPIO022_FUNC_GPIO022				   (39 << 8 | 0x1)
+#define CIX_PAD_GPIO023_FUNC_SFI_GPIO8				   (40 << 8 | 0x0)
+#define CIX_PAD_GPIO023_FUNC_GPIO023				   (40 << 8 | 0x1)
+#define CIX_PAD_GPIO023_FUNC_SFI_I3C0_PUR_EN_L			   (40 << 8 | 0x2)
+#define CIX_PAD_GPIO024_FUNC_SFI_GPIO9				   (41 << 8 | 0x0)
+#define CIX_PAD_GPIO024_FUNC_GPIO024				   (41 << 8 | 0x1)
+#define CIX_PAD_GPIO024_FUNC_SFI_I3C1_PUR_EN_L			   (41 << 8 | 0x2)
+#define CIX_PAD_SPI1_MISO_FUNC_SPI1_MISO			   (42 << 8 | 0x0)
+#define CIX_PAD_SPI1_MISO_FUNC_GPIO025				   (42 << 8 | 0x1)
+#define CIX_PAD_SPI1_CS0_FUNC_SPI1_CS0				   (43 << 8 | 0x0)
+#define CIX_PAD_SPI1_CS0_FUNC_GPIO026				   (43 << 8 | 0x1)
+#define CIX_PAD_SPI1_CS1_FUNC_SPI1_CS1				   (44 << 8 | 0x0)
+#define CIX_PAD_SPI1_CS1_FUNC_GPIO027				   (44 << 8 | 0x1)
+#define CIX_PAD_SPI1_MOSI_FUNC_SPI1_MOSI			   (45 << 8 | 0x0)
+#define CIX_PAD_SPI1_MOSI_FUNC_GPIO028				   (45 << 8 | 0x1)
+#define CIX_PAD_SPI1_CLK_FUNC_SPI1_CLK				   (46 << 8 | 0x0)
+#define CIX_PAD_SPI1_CLK_FUNC_GPIO029				   (46 << 8 | 0x1)
+#define CIX_PAD_GPIO030_FUNC_GPIO030				   (47 << 8 | 0x0)
+#define CIX_PAD_GPIO030_FUNC_USB_OC0_L				   (47 << 8 | 0x1)
+#define CIX_PAD_GPIO031_FUNC_GPIO031				   (48 << 8 | 0x0)
+#define CIX_PAD_GPIO031_FUNC_USB_OC1_L				   (48 << 8 | 0x1)
+#define CIX_PAD_GPIO032_FUNC_GPIO032				   (49 << 8 | 0x0)
+#define CIX_PAD_GPIO032_FUNC_USB_OC2_L				   (49 << 8 | 0x1)
+#define CIX_PAD_GPIO033_FUNC_GPIO033				   (50 << 8 | 0x0)
+#define CIX_PAD_GPIO033_FUNC_USB_OC3_L				   (50 << 8 | 0x1)
+#define CIX_PAD_GPIO034_FUNC_GPIO034				   (51 << 8 | 0x0)
+#define CIX_PAD_GPIO034_FUNC_USB_OC4_L				   (51 << 8 | 0x1)
+#define CIX_PAD_GPIO035_FUNC_GPIO035				   (52 << 8 | 0x0)
+#define CIX_PAD_GPIO035_FUNC_USB_OC5_L				   (52 << 8 | 0x1)
+#define CIX_PAD_GPIO036_FUNC_GPIO036				   (53 << 8 | 0x0)
+#define CIX_PAD_GPIO036_FUNC_USB_OC6_L				   (53 << 8 | 0x1)
+#define CIX_PAD_GPIO037_FUNC_GPIO037				   (54 << 8 | 0x0)
+#define CIX_PAD_GPIO037_FUNC_USB_OC7_L				   (54 << 8 | 0x1)
+#define CIX_PAD_GPIO038_FUNC_GPIO038				   (55 << 8 | 0x0)
+#define CIX_PAD_GPIO038_FUNC_USB_OC8_L				   (55 << 8 | 0x1)
+#define CIX_PAD_GPIO039_FUNC_GPIO039				   (56 << 8 | 0x0)
+#define CIX_PAD_GPIO039_FUNC_USB_OC9_L				   (56 << 8 | 0x1)
+#define CIX_PAD_GPIO040_FUNC_GPIO040				   (57 << 8 | 0x0)
+#define CIX_PAD_GPIO040_FUNC_USB_DRIVE_VBUS0			   (57 << 8 | 0x1)
+#define CIX_PAD_GPIO041_FUNC_GPIO041				   (58 << 8 | 0x0)
+#define CIX_PAD_GPIO041_FUNC_USB_DRIVE_VBUS4			   (58 << 8 | 0x1)
+#define CIX_PAD_GPIO042_FUNC_GPIO042				   (59 << 8 | 0x0)
+#define CIX_PAD_GPIO042_FUNC_USB_DRIVE_VBUS5			   (59 << 8 | 0x1)
+#define CIX_PAD_SE_QSPI_CLK_FUNC_SE_QSPI_CLK			   (60 << 8 | 0x0)
+#define CIX_PAD_SE_QSPI_CLK_FUNC_QSPI_CLK			   (60 << 8 | 0x1)
+#define CIX_PAD_SE_QSPI_CS_L_FUNC_SE_QSPI_CS_L			   (61 << 8 | 0x0)
+#define CIX_PAD_SE_QSPI_CS_L_FUNC_QSPI_CS_L			   (61 << 8 | 0x1)
+#define CIX_PAD_SE_QSPI_DATA0_FUNC_SE_QSPI_DATA0		   (62 << 8 | 0x0)
+#define CIX_PAD_SE_QSPI_DATA0_FUNC_QSPI_DATA0			   (62 << 8 | 0x1)
+#define CIX_PAD_SE_QSPI_DATA1_FUNC_SE_QSPI_DATA1		   (63 << 8 | 0x0)
+#define CIX_PAD_SE_QSPI_DATA1_FUNC_QSPI_DATA1			   (63 << 8 | 0x1)
+#define CIX_PAD_SE_QSPI_DATA2_FUNC_SE_QSPI_DATA2		   (64 << 8 | 0x0)
+#define CIX_PAD_SE_QSPI_DATA2_FUNC_QSPI_DATA2			   (64 << 8 | 0x1)
+#define CIX_PAD_SE_QSPI_DATA3_FUNC_SE_QSPI_DATA3		   (65 << 8 | 0x0)
+#define CIX_PAD_SE_QSPI_DATA3_FUNC_QSPI_DATA3			   (65 << 8 | 0x1)
+/* s0 pads */
+#define CIX_PAD_GPIO043_FUNC_GPIO043				   (0 << 8 | 0x0)
+#define CIX_PAD_GPIO044_FUNC_GPIO044				   (1 << 8 | 0x0)
+#define CIX_PAD_GPIO045_FUNC_GPIO045				   (2 << 8 | 0x0)
+#define CIX_PAD_GPIO046_FUNC_GPIO046				   (3 << 8 | 0x0)
+#define CIX_PAD_DP2_DIGON_FUNC_DP2_DIGON			   (18 << 8 | 0x0)
+#define CIX_PAD_DP2_BLON_FUNC_DP2_BLON				   (19 << 8 | 0x0)
+#define CIX_PAD_DP2_VARY_BL_FUNC_DP2_VARY_BL			   (20 << 8 | 0x0)
+#define CIX_PAD_I2C7_SCL_FUNC_I2C7_SCL				   (21 << 8 | 0x0)
+#define CIX_PAD_I2C7_SDA_FUNC_I2C7_SDA				   (22 << 8 | 0x0)
+#define CIX_PAD_I2C5_SCL_FUNC_I2C5_SCL				   (26 << 8 | 0x0)
+#define CIX_PAD_I2C5_SCL_FUNC_GPIO047				   (26 << 8 | 0x1)
+#define CIX_PAD_I2C5_SDA_FUNC_I2C5_SDA				   (27 << 8 | 0x0)
+#define CIX_PAD_I2C5_SDA_FUNC_GPIO048				   (27 << 8 | 0x1)
+#define CIX_PAD_I2C6_SCL_FUNC_I2C6_SCL				   (28 << 8 | 0x0)
+#define CIX_PAD_I2C6_SCL_FUNC_GPIO049				   (28 << 8 | 0x1)
+#define CIX_PAD_I2C6_SDA_FUNC_I2C6_SDA				   (29 << 8 | 0x0)
+#define CIX_PAD_I2C6_SDA_FUNC_GPIO050				   (29 << 8 | 0x1)
+#define CIX_PAD_I2C0_CLK_FUNC_I2C0_CLK				   (30 << 8 | 0x0)
+#define CIX_PAD_I2C0_CLK_FUNC_GPIO051				   (30 << 8 | 0x1)
+#define CIX_PAD_I2C0_SDA_FUNC_I2C0_SDA				   (31 << 8 | 0x0)
+#define CIX_PAD_I2C0_SDA_FUNC_GPIO052				   (31 << 8 | 0x1)
+#define CIX_PAD_I2C1_CLK_FUNC_I2C1_CLK				   (32 << 8 | 0x0)
+#define CIX_PAD_I2C1_CLK_FUNC_GPIO053				   (32 << 8 | 0x1)
+#define CIX_PAD_I2C1_SDA_FUNC_I2C1_SDA				   (33 << 8 | 0x0)
+#define CIX_PAD_I2C1_SDA_FUNC_GPIO054				   (33 << 8 | 0x1)
+#define CIX_PAD_I2C2_SCL_FUNC_I2C2_SCL				   (34 << 8 | 0x0)
+#define CIX_PAD_I2C2_SCL_FUNC_I3C0_SCL				   (34 << 8 | 0x1)
+#define CIX_PAD_I2C2_SCL_FUNC_GPIO055				   (34 << 8 | 0x2)
+#define CIX_PAD_I2C2_SDA_FUNC_I2C2_SDA				   (35 << 8 | 0x0)
+#define CIX_PAD_I2C2_SDA_FUNC_I3C0_SDA				   (35 << 8 | 0x1)
+#define CIX_PAD_I2C2_SDA_FUNC_GPIO056				   (35 << 8 | 0x2)
+#define CIX_PAD_GPIO057_FUNC_GPIO057				   (36 << 8 | 0x0)
+#define CIX_PAD_GPIO057_FUNC_I3C0_PUR_EN_L			   (36 << 8 | 0x1)
+#define CIX_PAD_I2C3_CLK_FUNC_I2C3_CLK				   (37 << 8 | 0x0)
+#define CIX_PAD_I2C3_CLK_FUNC_I3C1_CLK				   (37 << 8 | 0x1)
+#define CIX_PAD_I2C3_CLK_FUNC_GPIO058				   (37 << 8 | 0x2)
+#define CIX_PAD_I2C3_SDA_FUNC_I2C3_SDA				   (38 << 8 | 0x0)
+#define CIX_PAD_I2C3_SDA_FUNC_I3C1_SDA				   (38 << 8 | 0x1)
+#define CIX_PAD_I2C3_SDA_FUNC_GPIO059				   (38 << 8 | 0x2)
+#define CIX_PAD_GPIO060_FUNC_GPIO060				   (39 << 8 | 0x0)
+#define CIX_PAD_GPIO060_FUNC_I3C1_PUR_EN_L			   (39 << 8 | 0x1)
+#define CIX_PAD_I2C4_CLK_FUNC_I2C4_CLK				   (40 << 8 | 0x0)
+#define CIX_PAD_I2C4_CLK_FUNC_GPIO061				   (40 << 8 | 0x1)
+#define CIX_PAD_I2C4_SDA_FUNC_I2C4_SDA				   (41 << 8 | 0x0)
+#define CIX_PAD_I2C4_SDA_FUNC_GPIO062				   (41 << 8 | 0x1)
+#define CIX_PAD_HDA_BITCLK_FUNC_HDA_BITCLK			   (42 << 8 | 0x0)
+#define CIX_PAD_HDA_BITCLK_FUNC_I2S0_SCK			   (42 << 8 | 0x1)
+#define CIX_PAD_HDA_BITCLK_FUNC_I2S9_RSCK_DBG			   (42 << 8 | 0x2)
+#define CIX_PAD_HDA_RST_L_FUNC_HDA_RST_L			   (43 << 8 | 0x0)
+#define CIX_PAD_HDA_RST_L_FUNC_I2S0_DATA_IN			   (43 << 8 | 0x1)
+#define CIX_PAD_HDA_RST_L_FUNC_I2S9_DATA_IN0_DBG		   (43 << 8 | 0x2)
+#define CIX_PAD_HDA_SDIN0_FUNC_HDA_SDIN0			   (44 << 8 | 0x0)
+#define CIX_PAD_HDA_SDIN0_FUNC_I2S0_MCLK			   (44 << 8 | 0x1)
+#define CIX_PAD_HDA_SDIN0_FUNC_I2S9_TSCK_DBG			   (44 << 8 | 0x2)
+#define CIX_PAD_HDA_SDOUT0_FUNC_HDA_SDOUT0			   (45 << 8 | 0x0)
+#define CIX_PAD_HDA_SDOUT0_FUNC_I2S0_DATA_OUT			   (45 << 8 | 0x1)
+#define CIX_PAD_HDA_SDOUT0_FUNC_I2S9_TWS_DBG		           (45 << 8 | 0x2)
+#define CIX_PAD_HDA_SYNC_FUNC_HDA_SYNC				   (46 << 8 | 0x0)
+#define CIX_PAD_HDA_SYNC_FUNC_I2S0_WS				   (46 << 8 | 0x1)
+#define CIX_PAD_HDA_SYNC_FUNC_I2S9_RWS_DBG			   (46 << 8 | 0x2)
+#define CIX_PAD_HDA_SDIN1_FUNC_HDA_SDIN1			   (47 << 8 | 0x0)
+#define CIX_PAD_HDA_SDIN1_FUNC_GPIO063				   (47 << 8 | 0x1)
+#define CIX_PAD_HDA_SDIN1_FUNC_I2S9_DATA_IN1_DBG		   (47 << 8 | 0x2)
+#define CIX_PAD_HDA_SDOUT1_FUNC_HDA_SDOUT1			   (48 << 8 | 0x0)
+#define CIX_PAD_HDA_SDOUT1_FUNC_GPIO064				   (48 << 8 | 0x1)
+#define CIX_PAD_HDA_SDOUT1_FUNC_I2S9_DATA_OUT0_DBG		   (48 << 8 | 0x2)
+#define CIX_PAD_I2S1_MCLK_FUNC_I2S1_MCLK			   (49 << 8 | 0x0)
+#define CIX_PAD_I2S1_MCLK_FUNC_GPIO065				   (49 << 8 | 0x1)
+#define CIX_PAD_I2S1_SCK_FUNC_I2S1_SCK				   (50 << 8 | 0x0)
+#define CIX_PAD_I2S1_SCK_FUNC_GPIO066				   (50 << 8 | 0x1)
+#define CIX_PAD_I2S1_WS_FUNC_I2S1_WS				   (51 << 8 | 0x0)
+#define CIX_PAD_I2S1_WS_FUNC_GPIO067				   (51 << 8 | 0x1)
+#define CIX_PAD_I2S1_DATA_IN_FUNC_I2S1_DATA_IN			   (52 << 8 | 0x0)
+#define CIX_PAD_I2S1_DATA_IN_FUNC_GPIO068			   (52 << 8 | 0x1)
+#define CIX_PAD_I2S1_DATA_OUT_FUNC_I2S1_DATA_OUT		   (53 << 8 | 0x0)
+#define CIX_PAD_I2S1_DATA_OUT_FUNC_GPIO069			   (53 << 8 | 0x1)
+#define CIX_PAD_I2S2_MCLK_FUNC_I2S2_MCLK			   (54 << 8 | 0x0)
+#define CIX_PAD_I2S2_MCLK_FUNC_GPIO070				   (54 << 8 | 0x1)
+#define CIX_PAD_I2S2_RSCK_FUNC_I2S2_RSCK			   (55 << 8 | 0x0)
+#define CIX_PAD_I2S2_RSCK_FUNC_GPIO071				   (55 << 8 | 0x1)
+#define CIX_PAD_I2S2_RSCK_FUNC_I2S5_RSCK_DBG			   (55 << 8 | 0x2)
+#define CIX_PAD_I2S2_RSCK_FUNC_I2S6_RSCK_DBG			   (55 << 8 | 0x3)
+#define CIX_PAD_I2S2_RWS_FUNC_I2S2_RWS				   (56 << 8 | 0x0)
+#define CIX_PAD_I2S2_RWS_FUNC_GPIO072				   (56 << 8 | 0x1)
+#define CIX_PAD_I2S2_RWS_FUNC_I2S5_RWS_DBG			   (56 << 8 | 0x2)
+#define CIX_PAD_I2S2_RWS_FUNC_I2S6_RWS_DBG			   (56 << 8 | 0x3)
+#define CIX_PAD_I2S2_TSCK_FUNC_I2S2_TSCK			   (57 << 8 | 0x0)
+#define CIX_PAD_I2S2_TSCK_FUNC_GPIO073				   (57 << 8 | 0x1)
+#define CIX_PAD_I2S2_TSCK_FUNC_I2S5_TSCK_DBG			   (57 << 8 | 0x2)
+#define CIX_PAD_I2S2_TSCK_FUNC_I2S6_TSCK_DBG			   (57 << 8 | 0x3)
+#define CIX_PAD_I2S2_TWS_FUNC_I2S2_TWS				   (58 << 8 | 0x0)
+#define CIX_PAD_I2S2_TWS_FUNC_GPIO074				   (58 << 8 | 0x1)
+#define CIX_PAD_I2S2_TWS_FUNC_I2S5_TWS_DBG			   (58 << 8 | 0x2)
+#define CIX_PAD_I2S2_TWS_FUNC_I2S6_TWS_DBG			   (58 << 8 | 0x3)
+#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S2_DATA_IN0		   (59 << 8 | 0x0)
+#define CIX_PAD_I2S2_DATA_IN0_FUNC_GPIO075			   (59 << 8 | 0x1)
+#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S5_DATA_IN0_DBG		   (59 << 8 | 0x2)
+#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S6_DATA_IN0_DBG		   (59 << 8 | 0x3)
+#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S2_DATA_IN1		   (60 << 8 | 0x0)
+#define CIX_PAD_I2S2_DATA_IN1_FUNC_GPIO076			   (60 << 8 | 0x1)
+#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S5_DATA_IN1_DBG		   (60 << 8 | 0x2)
+#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S6_DATA_IN1_DBG		   (60 << 8 | 0x3)
+#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S2_DATA_OUT0		   (61 << 8 | 0x0)
+#define CIX_PAD_I2S2_DATA_OUT0_FUNC_GPIO077			   (61 << 8 | 0x1)
+#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S5_DATA_OUT0_DBG		   (61 << 8 | 0x2)
+#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S6_DATA_OUT0_DBG		   (61 << 8 | 0x3)
+#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S2_DATA_OUT1		   (62 << 8 | 0x0)
+#define CIX_PAD_I2S2_DATA_OUT1_FUNC_GPIO078			   (62 << 8 | 0x1)
+#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S5_DATA_OUT1_DBG		   (62 << 8 | 0x2)
+#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S6_DATA_OUT1_DBG		   (62 << 8 | 0x3)
+#define CIX_PAD_I2S2_DATA_OUT2_FUNC_I2S2_DATA_OUT2		   (63 << 8 | 0x0)
+#define CIX_PAD_I2S2_DATA_OUT2_FUNC_GPIO079			   (63 << 8 | 0x1)
+#define CIX_PAD_I2S2_DATA_OUT3_FUNC_I2S2_DATA_OUT3		   (64 << 8 | 0x0)
+#define CIX_PAD_I2S2_DATA_OUT3_FUNC_GPIO080			   (64 << 8 | 0x1)
+#define CIX_PAD_I2S2_DATA_OUT3_FUNC_I2S9_DATA_OUT1_DBG		   (64 << 8 | 0x2)
+#define CIX_PAD_I2S3_MCLK_FUNC_I2S3_MCLK			   (65 << 8 | 0x0)
+#define CIX_PAD_I2S3_MCLK_FUNC_GPIO081				   (65 << 8 | 0x1)
+#define CIX_PAD_I2S3_RSCK_FUNC_I2S3_RSCK			   (66 << 8 | 0x0)
+#define CIX_PAD_I2S3_RSCK_FUNC_GPIO082				   (66 << 8 | 0x1)
+#define CIX_PAD_I2S3_RSCK_FUNC_I2S7_RSCK_DBG			   (66 << 8 | 0x2)
+#define CIX_PAD_I2S3_RSCK_FUNC_I2S8_RSCK_DBG			   (66 << 8 | 0x3)
+#define CIX_PAD_I2S3_RWS_FUNC_I2S3_RWS				   (67 << 8 | 0x0)
+#define CIX_PAD_I2S3_RWS_FUNC_GPIO083				   (67 << 8 | 0x1)
+#define CIX_PAD_I2S3_RWS_FUNC_I2S7_RWS_DBG			   (67 << 8 | 0x2)
+#define CIX_PAD_I2S3_RWS_FUNC_I2S8_RWS_DBG			   (67 << 8 | 0x3)
+#define CIX_PAD_I2S3_TSCK_FUNC_I2S3_TSCK			   (68 << 8 | 0x0)
+#define CIX_PAD_I2S3_TSCK_FUNC_GPIO084				   (68 << 8 | 0x1)
+#define CIX_PAD_I2S3_TSCK_FUNC_I2S7_TSCK_DBG			   (68 << 8 | 0x2)
+#define CIX_PAD_I2S3_TSCK_FUNC_I2S8_TSCK_DBG			   (68 << 8 | 0x3)
+#define CIX_PAD_I2S3_TWS_FUNC_I2S3_TWS				   (69 << 8 | 0x0)
+#define CIX_PAD_I2S3_TWS_FUNC_GPIO085				   (69 << 8 | 0x1)
+#define CIX_PAD_I2S3_TWS_FUNC_I2S7_TWS_DBG			   (69 << 8 | 0x2)
+#define CIX_PAD_I2S3_TWS_FUNC_I2S8_TWS_DBG			   (69 << 8 | 0x3)
+#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S3_DATA_IN0		   (70 << 8 | 0x0)
+#define CIX_PAD_I2S3_DATA_IN0_FUNC_GPIO086			   (70 << 8 | 0x1)
+#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S7_DATA_IN0_DBG		   (70 << 8 | 0x2)
+#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S8_DATA_IN0_DBG		   (70 << 8 | 0x3)
+#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S3_DATA_IN1		   (71 << 8 | 0x0)
+#define CIX_PAD_I2S3_DATA_IN1_FUNC_GPIO087			   (71 << 8 | 0x1)
+#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S7_DATA_IN1_DBG		   (71 << 8 | 0x2)
+#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S8_DATA_IN1_DBG		   (71 << 8 | 0x3)
+#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S3_DATA_OUT0		   (72 << 8 | 0x0)
+#define CIX_PAD_I2S3_DATA_OUT0_FUNC_GPIO088			   (72 << 8 | 0x1)
+#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S7_DATA_OUT0_DBG		   (72 << 8 | 0x2)
+#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S8_DATA_OUT0_DBG		   (72 << 8 | 0x3)
+#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S3_DATA_OUT1		   (73 << 8 | 0x0)
+#define CIX_PAD_I2S3_DATA_OUT1_FUNC_GPIO089			   (73 << 8 | 0x1)
+#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S7_DATA_OUT1_DBG		   (73 << 8 | 0x2)
+#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S8_DATA_OUT1_DBG		   (73 << 8 | 0x3)
+#define CIX_PAD_GPIO090_FUNC_GPIO090				   (74 << 8 | 0x0)
+#define CIX_PAD_GPIO090_FUNC_I2S4_MCLK_LB			   (74 << 8 | 0x1)
+#define CIX_PAD_GPIO091_FUNC_GPIO091				   (75 << 8 | 0x0)
+#define CIX_PAD_GPIO091_FUNC_I2S4_SCK_LB			   (75 << 8 | 0x1)
+#define CIX_PAD_GPIO092_FUNC_GPIO092				   (76 << 8 | 0x0)
+#define CIX_PAD_GPIO092_FUNC_I2S4_WS_LB				   (76 << 8 | 0x1)
+#define CIX_PAD_GPIO093_FUNC_GPIO093				   (77 << 8 | 0x0)
+#define CIX_PAD_GPIO093_FUNC_I2S4_DATA_IN_LB			   (77 << 8 | 0x1)
+#define CIX_PAD_GPIO094_FUNC_GPIO094				   (78 << 8 | 0x0)
+#define CIX_PAD_GPIO094_FUNC_I2S4_DATA_OUT_LB			   (78 << 8 | 0x1)
+#define CIX_PAD_UART0_TXD_FUNC_UART0_TXD			   (79 << 8 | 0x0)
+#define CIX_PAD_UART0_TXD_FUNC_PWM0				   (79 << 8 | 0x1)
+#define CIX_PAD_UART0_TXD_FUNC_GPIO095				   (79 << 8 | 0x2)
+#define CIX_PAD_UART0_RXD_FUNC_UART0_RXD			   (80 << 8 | 0x0)
+#define CIX_PAD_UART0_RXD_FUNC_PWM1				   (80 << 8 | 0x1)
+#define CIX_PAD_UART0_RXD_FUNC_GPIO096				   (80 << 8 | 0x2)
+#define CIX_PAD_UART0_CTS_FUNC_UART0_CTS			   (81 << 8 | 0x0)
+#define CIX_PAD_UART0_CTS_FUNC_FAN_OUT2				   (81 << 8 | 0x1)
+#define CIX_PAD_UART0_CTS_FUNC_GPIO097				   (81 << 8 | 0x2)
+#define CIX_PAD_UART0_RTS_FUNC_UART0_RTS			   (82 << 8 | 0x0)
+#define CIX_PAD_UART0_RTS_FUNC_FAN_TACH2			   (82 << 8 | 0x1)
+#define CIX_PAD_UART0_RTS_FUNC_GPIO098				   (82 << 8 | 0x2)
+#define CIX_PAD_UART1_TXD_FUNC_UART1_TXD			   (83 << 8 | 0x0)
+#define CIX_PAD_UART1_TXD_FUNC_FAN_OUT0				   (83 << 8 | 0x1)
+#define CIX_PAD_UART1_TXD_FUNC_GPIO099				   (83 << 8 | 0x2)
+#define CIX_PAD_UART1_RXD_FUNC_UART1_RXD			   (84 << 8 | 0x0)
+#define CIX_PAD_UART1_RXD_FUNC_FAN_TACH0			   (84 << 8 | 0x1)
+#define CIX_PAD_UART1_RXD_FUNC_GPIO100				   (84 << 8 | 0x2)
+#define CIX_PAD_UART1_CTS_FUNC_UART1_CTS			   (85 << 8 | 0x0)
+#define CIX_PAD_UART1_CTS_FUNC_FAN_OUT1				   (85 << 8 | 0x1)
+#define CIX_PAD_UART1_CTS_FUNC_GPIO101				   (85 << 8 | 0x2)
+#define CIX_PAD_UART1_RTS_FUNC_UART1_RTS			   (86 << 8 | 0x0)
+#define CIX_PAD_UART1_RTS_FUNC_FAN_TACH1			   (86 << 8 | 0x1)
+#define CIX_PAD_UART1_RTS_FUNC_GPIO102				   (86 << 8 | 0x2)
+#define CIX_PAD_UART2_TXD_FUNC_UART2_TXD			   (87 << 8 | 0x0)
+#define CIX_PAD_UART2_TXD_FUNC_GPIO103				   (87 << 8 | 0x1)
+#define CIX_PAD_UART2_RXD_FUNC_UART2_RXD			   (88 << 8 | 0x0)
+#define CIX_PAD_UART2_RXD_FUNC_GPIO104				   (88 << 8 | 0x1)
+#define CIX_PAD_UART3_TXD_FUNC_UART3_TXD			   (89 << 8 | 0x0)
+#define CIX_PAD_UART3_TXD_FUNC_GPIO105				   (89 << 8 | 0x1)
+#define CIX_PAD_UART3_RXD_FUNC_UART3_RXD			   (90 << 8 | 0x0)
+#define CIX_PAD_UART3_RXD_FUNC_GPIO106				   (90 << 8 | 0x1)
+#define CIX_PAD_UART3_CTS_FUNC_UART3_CTS			   (91 << 8 | 0x0)
+#define CIX_PAD_UART3_CTS_FUNC_GPIO107				   (91 << 8 | 0x1)
+#define CIX_PAD_UART3_CTS_FUNC_TRIGIN0				   (91 << 8 | 0x2)
+#define CIX_PAD_UART3_RTS_FUNC_UART3_RTS			   (92 << 8 | 0x0)
+#define CIX_PAD_UART3_RTS_FUNC_GPIO108				   (92 << 8 | 0x1)
+#define CIX_PAD_UART3_RTS_FUNC_TRIGIN1				   (92 << 8 | 0x2)
+#define CIX_PAD_UART4_CSU_PM_TXD_FUNC_UART4_CSU_PM_TXD		   (93 << 8 | 0x0)
+#define CIX_PAD_UART4_CSU_PM_TXD_FUNC_GPIO109			   (93 << 8 | 0x1)
+#define CIX_PAD_UART4_CSU_PM_RXD_FUNC_UART4_CSU_PM_RXD		   (94 << 8 | 0x0)
+#define CIX_PAD_UART4_CSU_PM_RXD_FUNC_GPIO110			   (94 << 8 | 0x1)
+#define CIX_PAD_UART5_CSU_SE_TXD_FUNC_UART5_CSU_SE_TXD		   (95 << 8 | 0x0)
+#define CIX_PAD_UART5_CSU_SE_TXD_FUNC_GPIO111			   (95 << 8 | 0x1)
+#define CIX_PAD_UART5_CSU_SE_RXD_FUNC_UART5_CSU_SE_RXD		   (96 << 8 | 0x0)
+#define CIX_PAD_UART5_CSU_SE_RXD_FUNC_GPIO112			   (96 << 8 | 0x1)
+#define CIX_PAD_UART6_CSU_SE_RXD_FUNC_UART6_CSU_SE_RXD		   (97 << 8 | 0x0)
+#define CIX_PAD_UART6_CSU_SE_RXD_FUNC_GPIO113			   (97 << 8 | 0x1)
+#define CIX_PAD_CLK_REQ0_L_FUNC_CLK_REQ0_L			   (98 << 8 | 0x0)
+#define CIX_PAD_CLK_REQ0_L_FUNC_GPIO114				   (98 << 8 | 0x1)
+#define CIX_PAD_CLK_REQ2_L_FUNC_CLK_REQ2_L			   (99 << 8 | 0x0)
+#define CIX_PAD_CLK_REQ2_L_FUNC_GPIO115				   (99 << 8 | 0x1)
+#define CIX_PAD_CLK_REQ4_L_FUNC_CLK_REQ4_L			   (100 << 8 | 0x0)
+#define CIX_PAD_CLK_REQ4_L_FUNC_GPIO116				   (100 << 8 | 0x1)
+#define CIX_PAD_CSI0_MCLK0_FUNC_CSI0_MCLK0			   (101 << 8 | 0x0)
+#define CIX_PAD_CSI0_MCLK0_FUNC_GPIO117				   (101 << 8 | 0x1)
+#define CIX_PAD_CSI0_MCLK1_FUNC_CSI0_MCLK1			   (102 << 8 | 0x0)
+#define CIX_PAD_CSI0_MCLK1_FUNC_GPIO118				   (102 << 8 | 0x1)
+#define CIX_PAD_CSI1_MCLK0_FUNC_CSI1_MCLK0			   (103 << 8 | 0x0)
+#define CIX_PAD_CSI1_MCLK0_FUNC_GPIO119				   (103 << 8 | 0x1)
+#define CIX_PAD_CSI1_MCLK1_FUNC_CSI1_MCLK1			   (104 << 8 | 0x0)
+#define CIX_PAD_CSI1_MCLK1_FUNC_GPIO120				   (104 << 8 | 0x1)
+#define CIX_PAD_GPIO121_FUNC_GPIO121				   (105 << 8 | 0x0)
+#define CIX_PAD_GPIO121_FUNC_GMAC0_REFCLK_25M			   (105 << 8 | 0x1)
+#define CIX_PAD_GPIO122_FUNC_GPIO122				   (106 << 8 | 0x0)
+#define CIX_PAD_GPIO122_FUNC_GMAC0_TX_CTL			   (106 << 8 | 0x1)
+#define CIX_PAD_GPIO123_FUNC_GPIO123				   (107 << 8 | 0x0)
+#define CIX_PAD_GPIO123_FUNC_GMAC0_TXD0				   (107 << 8 | 0x1)
+#define CIX_PAD_GPIO124_FUNC_GPIO124				   (108 << 8 | 0x0)
+#define CIX_PAD_GPIO124_FUNC_GMAC0_TXD1				   (108 << 8 | 0x1)
+#define CIX_PAD_GPIO125_FUNC_GPIO125				   (109 << 8 | 0x0)
+#define CIX_PAD_GPIO125_FUNC_GMAC0_TXD2				   (109 << 8 | 0x1)
+#define CIX_PAD_GPIO126_FUNC_GPIO126				   (110 << 8 | 0x0)
+#define CIX_PAD_GPIO126_FUNC_GMAC0_TXD3				   (110 << 8 | 0x1)
+#define CIX_PAD_GPIO127_FUNC_GPIO127				   (111 << 8 | 0x0)
+#define CIX_PAD_GPIO127_FUNC_GMAC0_TX_CLK			   (111 << 8 | 0x1)
+#define CIX_PAD_GPIO128_FUNC_GPIO128				   (112 << 8 | 0x0)
+#define CIX_PAD_GPIO128_FUNC_GMAC0_RX_CTL			   (112 << 8 | 0x1)
+#define CIX_PAD_GPIO129_FUNC_GPIO129				   (113 << 8 | 0x0)
+#define CIX_PAD_GPIO129_FUNC_GMAC0_RXD0				   (113 << 8 | 0x1)
+#define CIX_PAD_GPIO130_FUNC_GPIO130				   (114 << 8 | 0x0)
+#define CIX_PAD_GPIO130_FUNC_GMAC0_RXD1				   (114 << 8 | 0x1)
+#define CIX_PAD_GPIO131_FUNC_GPIO131				   (115 << 8 | 0x0)
+#define CIX_PAD_GPIO131_FUNC_GMAC0_RXD2				   (115 << 8 | 0x1)
+#define CIX_PAD_GPIO132_FUNC_GPIO132				   (116 << 8 | 0x0)
+#define CIX_PAD_GPIO132_FUNC_GMAC0_RXD3				   (116 << 8 | 0x1)
+#define CIX_PAD_GPIO133_FUNC_GPIO133				   (117 << 8 | 0x0)
+#define CIX_PAD_GPIO133_FUNC_GMAC0_RX_CLK			   (117 << 8 | 0x1)
+#define CIX_PAD_GPIO134_FUNC_GPIO134				   (118 << 8 | 0x0)
+#define CIX_PAD_GPIO134_FUNC_GMAC0_MDC				   (118 << 8 | 0x1)
+#define CIX_PAD_GPIO135_FUNC_GPIO135				   (119 << 8 | 0x0)
+#define CIX_PAD_GPIO135_FUNC_GMAC0_MDIO				   (119 << 8 | 0x1)
+#define CIX_PAD_GPIO136_FUNC_GPIO136				   (120 << 8 | 0x0)
+#define CIX_PAD_GPIO136_FUNC_GMAC1_REFCLK_25M			   (120 << 8 | 0x1)
+#define CIX_PAD_GPIO137_FUNC_GPIO137				   (121 << 8 | 0x0)
+#define CIX_PAD_GPIO137_FUNC_GMAC1_TX_CTL			   (121 << 8 | 0x1)
+#define CIX_PAD_GPIO138_FUNC_GPIO138				   (122 << 8 | 0x0)
+#define CIX_PAD_GPIO138_FUNC_GMAC1_TXD0				   (122 << 8 | 0x1)
+#define CIX_PAD_GPIO138_FUNC_SPI2_MISO				   (122 << 8 | 0x2)
+#define CIX_PAD_GPIO139_FUNC_GPIO139				   (123 << 8 | 0x0)
+#define CIX_PAD_GPIO139_FUNC_GMAC1_TXD1				   (123 << 8 | 0x1)
+#define CIX_PAD_GPIO139_FUNC_SPI2_CS0				   (123 << 8 | 0x2)
+#define CIX_PAD_GPIO140_FUNC_GPIO140				   (124 << 8 | 0x0)
+#define CIX_PAD_GPIO140_FUNC_GMAC1_TXD2				   (124 << 8 | 0x1)
+#define CIX_PAD_GPIO140_FUNC_SPI2_CS1				   (124 << 8 | 0x2)
+#define CIX_PAD_GPIO141_FUNC_GPIO141				   (125 << 8 | 0x0)
+#define CIX_PAD_GPIO141_FUNC_GMAC1_TXD3				   (125 << 8 | 0x1)
+#define CIX_PAD_GPIO141_FUNC_SPI2_MOSI				   (125 << 8 | 0x2)
+#define CIX_PAD_GPIO142_FUNC_GPIO142				   (126 << 8 | 0x0)
+#define CIX_PAD_GPIO142_FUNC_GMAC1_TX_CLK			   (126 << 8 | 0x1)
+#define CIX_PAD_GPIO142_FUNC_SPI2_CLK				   (126 << 8 | 0x2)
+#define CIX_PAD_GPIO143_FUNC_GPIO143				   (127 << 8 | 0x0)
+#define CIX_PAD_GPIO143_FUNC_GMAC1_RX_CTL			   (127 << 8 | 0x1)
+#define CIX_PAD_GPIO144_FUNC_GPIO144				   (128 << 8 | 0x0)
+#define CIX_PAD_GPIO144_FUNC_GMAC1_RXD0				   (128 << 8 | 0x1)
+#define CIX_PAD_GPIO145_FUNC_GPIO145				   (129 << 8 | 0x0)
+#define CIX_PAD_GPIO145_FUNC_GMAC1_RXD1				   (129 << 8 | 0x1)
+#define CIX_PAD_GPIO146_FUNC_GPIO146				   (130 << 8 | 0x0)
+#define CIX_PAD_GPIO146_FUNC_GMAC1_RXD2				   (130 << 8 | 0x1)
+#define CIX_PAD_GPIO147_FUNC_GPIO147				   (131 << 8 | 0x0)
+#define CIX_PAD_GPIO147_FUNC_GMAC1_RXD3				   (131 << 8 | 0x1)
+#define CIX_PAD_GPIO148_FUNC_GPIO148				   (132 << 8 | 0x0)
+#define CIX_PAD_GPIO148_FUNC_GMAC1_RX_CLK			   (132 << 8 | 0x1)
+#define CIX_PAD_GPIO149_FUNC_GPIO149				   (133 << 8 | 0x0)
+#define CIX_PAD_GPIO149_FUNC_GMAC1_MDC				   (133 << 8 | 0x1)
+#define CIX_PAD_GPIO150_FUNC_GPIO150				   (134 << 8 | 0x0)
+#define CIX_PAD_GPIO150_FUNC_GMAC1_MDIO				   (134 << 8 | 0x1)
+#define CIX_PAD_GPIO151_FUNC_GPIO151				   (135 << 8 | 0x0)
+#define CIX_PAD_GPIO151_FUNC_PM_GPIO0				   (135 << 8 | 0x1)
+#define CIX_PAD_GPIO152_FUNC_GPIO152				   (136 << 8 | 0x0)
+#define CIX_PAD_GPIO152_FUNC_PM_GPIO1				   (136 << 8 | 0x1)
+#define CIX_PAD_GPIO153_FUNC_GPIO153				   (137 << 8 | 0x0)
+#define CIX_PAD_GPIO153_FUNC_PM_GPIO2				   (137 << 8 | 0x1)
+
+#endif
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
new file mode 100644
index 000000000000..64b76905cbff
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -0,0 +1,586 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/cix,sky1.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x200>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a520";
+			enable-method = "psci";
+			reg = <0x0 0x300>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <403>;
+		};
+
+		cpu4: cpu@400 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x400>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu5: cpu@500 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x500>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu6: cpu@600 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x600>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu7: cpu@700 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x700>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu8: cpu@800 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x800>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu9: cpu@900 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0x900>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu10: cpu@a00 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0xa00>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu11: cpu@b00 {
+			compatible = "arm,cortex-a720";
+			enable-method = "psci";
+			reg = <0x0 0xb00>;
+			device_type = "cpu";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+				core4 {
+					cpu = <&cpu4>;
+				};
+				core5 {
+					cpu = <&cpu5>;
+				};
+				core6 {
+					cpu = <&cpu6>;
+				};
+				core7 {
+					cpu = <&cpu7>;
+				};
+				core8 {
+					cpu = <&cpu8>;
+				};
+				core9 {
+					cpu = <&cpu9>;
+				};
+				core10 {
+					cpu = <&cpu10>;
+				};
+				core11 {
+					cpu = <&cpu11>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		ap_to_pm_scmi: scmi {
+			compatible = "arm,scmi";
+			mbox-names = "tx", "rx";
+			mboxes = <&mbox_ap2pm 8>, <&mbox_pm2ap 8>;
+			shmem = <&ap2pm_scmi_mem>, <&pm2ap_scmi_mem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	pmu-a520 {
+		compatible = "arm,cortex-a520-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
+	};
+
+	pmu-a720 {
+		compatible = "arm,cortex-a720-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x20 0>;
+		dma-ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		i2c0: i2c@4010000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04010000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C0_APB>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4020000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04020000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C1_APB>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4030000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04030000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C2_APB>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@4040000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04040000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C3_APB>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@4050000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04050000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C4_APB>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@4060000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04060000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C5_APB>;
+			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@4070000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04070000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C6_APB>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@4080000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04080000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C7_APB>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		spi0: spi@4090000 {
+			compatible = "cix,sky1-spi-r1p6", "cdns,spi-r1p6";
+			reg = <0x0 0x04090000 0x0 0x10000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_SPI0_APB>,
+				 <&scmi_clk CLK_TREE_FCH_SPI0_APB>;
+			clock-names = "ref_clk", "pclk";
+			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@40a0000 {
+			compatible = "cix,sky1-spi-r1p6", "cdns,spi-r1p6";
+			reg = <0x0 0x040a0000 0x0 0x10000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_SPI1_APB>,
+				 <&scmi_clk CLK_TREE_FCH_SPI1_APB>;
+			clock-names = "ref_clk", "pclk";
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		uart0: serial@40b0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040b0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART0_FUNC>, <&scmi_clk CLK_TREE_FCH_UART0_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@40c0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040c0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART1_FUNC>, <&scmi_clk CLK_TREE_FCH_UART1_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@40d0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040d0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART2_FUNC>, <&scmi_clk CLK_TREE_FCH_UART2_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: serial@40e0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0x040e0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_UART3_FUNC>, <&scmi_clk CLK_TREE_FCH_UART3_APB>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		i3c0: i3c@40f0000 {
+			compatible = "cdns,i3c-master";
+			reg = <0x0 0x040f0000 0x0 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I3C0_APB>,
+				 <&scmi_clk CLK_TREE_FCH_I3C0_FUNC>;
+			clock-names = "pclk", "sysclk";
+			i3c-scl-hz = <400000>;
+			i2c-scl-hz = <100000>;
+			status = "disabled";
+		};
+
+		i3c1: i3c@4100000 {
+			compatible = "cdns,i3c-master";
+			reg = <0x0 0x04100000 0x0 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I3C1_APB>,
+				 <&scmi_clk CLK_TREE_FCH_I3C1_FUNC>;
+			clock-names = "pclk", "sysclk";
+			i3c-scl-hz = <400000>;
+			i2c-scl-hz = <100000>;
+			status = "disabled";
+		};
+
+		iomuxc: pinctrl@4170000 {
+			compatible = "cix,sky1-pinctrl";
+			reg = <0x0 0x04170000 0x0 0x1000>;
+		};
+
+		mbox_ap2se: mailbox@5060000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x05060000 0x0 0x10000>;
+			interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "tx";
+		};
+
+		mbox_se2ap: mailbox@5070000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x05070000 0x0 0x10000>;
+			interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "rx";
+		};
+
+		ap2pm_scmi_mem: shmem@6590000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x06590000 0x0 0x80>;
+			reg-io-width = <4>;
+		};
+
+		mbox_ap2pm: mailbox@6590080 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x06590080 0x0 0xff80>;
+			interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "tx";
+		};
+
+		pm2ap_scmi_mem: shmem@65a0000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x065a0000 0x0 0x80>;
+			reg-io-width = <4>;
+		};
+
+		mbox_pm2ap: mailbox@65a0080 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x065a0080 0x0 0xff80>;
+			interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "rx";
+		};
+
+		mbox_sfh2ap: mailbox@8090000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x08090000 0x0 0x10000>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "rx";
+		};
+
+		mbox_ap2sfh: mailbox@80a0000 {
+			compatible = "cix,sky1-mbox";
+			reg = <0x0 0x080a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			cix,mbox-dir = "tx";
+		};
+
+		pcie_x8_rc: pcie@a010000 {
+			compatible = "cix,sky1-pcie-host";
+			reg = <0x00 0x0a010000 0x00 0x10000>,
+			      <0x00 0x2c000000 0x00 0x4000000>,
+			      <0x00 0x0a000300 0x00 0x100>,
+			      <0x00 0x0a000400 0x00 0x100>,
+			      <0x00 0x60000000 0x00 0x00100000>;
+			reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
+			ranges = <0x01000000 0x0 0x60100000 0x0 0x60100000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x60200000 0x0 0x60200000 0x0 0x1fe00000>,
+				 <0x43000000 0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0xc0 0xff>;
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH 0>;
+			msi-map = <0xc000 &gic_its 0xc000 0x4000>;
+			status = "disabled";
+		};
+
+		pcie_x4_rc: pcie@a070000 {
+			compatible = "cix,sky1-pcie-host";
+			reg = <0x00 0x0a070000 0x00 0x10000>,
+			      <0x00 0x29000000 0x00 0x3000000>,
+			      <0x00 0x0a060300 0x00 0x40>,
+			      <0x00 0x0a060400 0x00 0x40>,
+			      <0x00 0x50000000 0x00 0x00100000>;
+			reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
+			ranges = <0x01000000 0x00 0x50100000 0x00 0x50100000 0x00 0x00100000>,
+				 <0x02000000 0x00 0x50200000 0x00 0x50200000 0x00 0x0fe00000>,
+				 <0x43000000 0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x90 0xbf>;
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH 0>;
+			msi-map = <0x9000 &gic_its 0x9000 0x3000>;
+			status = "disabled";
+		};
+
+		pcie_x2_rc: pcie@a0c0000 {
+			compatible = "cix,sky1-pcie-host";
+			reg = <0x00 0x0a0c0000 0x00 0x10000>,
+			      <0x00 0x26000000 0x00 0x3000000>,
+			      <0x00 0x0a0600340 0x00 0x20>,
+			      <0x00 0x0a0600440 0x00 0x20>,
+			      <0x00 0x40000000 0x00 0x00100000>;
+			reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
+			ranges = <0x01000000 0x0 0x40100000 0x0 0x40100000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x40200000 0x0 0x40200000 0x0 0x0fe00000>,
+				 <0x43000000 0x10 0x00000000 0x10 0x00000000 0x04 0x00000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x60 0x8f>;
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH 0>;
+			msi-map = <0x6000 &gic_its 0x6000 0x3000>;
+			status = "disabled";
+		};
+
+		pcie_x1_0_rc: pcie@a0d0000 {
+			compatible = "cix,sky1-pcie-host";
+			reg = <0x00 0x0a0d0000 0x00 0x10000>,
+			      <0x00 0x20000000 0x00 0x3000000>,
+			      <0x00 0x0a060360 0x00 0x20>,
+			      <0x00 0x0a060460 0x00 0x20>,
+			      <0x00 0x30000000 0x00 0x00100000>;
+			reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
+			ranges = <0x01000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x30200000 0x0 0x30200000 0x0 0x07e00000>,
+				 <0x43000000 0x08 0x00000000 0x08 0x00000000 0x04 0x00000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0x2f>;
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>;
+			msi-map = <0x0000 &gic_its 0x0000 0x3000>;
+			status = "disabled";
+		};
+
+		pcie_x1_1_rc: pcie@a0e0000 {
+			compatible = "cix,sky1-pcie-host";
+			reg = <0x00 0x0a0e0000 0x00 0x10000>,
+			      <0x00 0x23000000 0x00 0x3000000>,
+			      <0x00 0x0a060380 0x00 0x20>,
+			      <0x00 0x0a060480 0x00 0x20>,
+			      <0x00 0x38000000 0x00 0x00100000>;
+			reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
+			ranges = <0x01000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x38200000 0x0 0x38200000 0x0 0x07e00000>,
+				 <0x43000000 0x0C 0x00000000 0x0C 0x00000000 0x04 0x00000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x30 0x5f>;
+			device_type = "pci";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH 0>;
+			msi-map = <0x3000 &gic_its 0x3000 0x3000>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e010000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0e010000 0 0x10000>,	/* GICD */
+			      <0x0 0x0e090000 0 0x300000>;       /* GICR * 12 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@e050000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x0e050000 0x0 0x30000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+
+			ppi-partitions {
+				ppi_partition0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_partition1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7 &cpu8 &cpu9 &cpu10 &cpu11>;
+				};
+			};
+		};
+
+		iomuxc_s5: pinctrl@16007000 {
+			compatible = "cix,sky1-pinctrl-s5";
+			reg = <0x0 0x16007000 0x0 0x1000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 7a934499b235..bcca63136557 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,13 +1,22 @@
 # SPDX-License-Identifier: GPL-2.0
+subdir-y += axis
 subdir-y += google
 
 dtb-$(CONFIG_ARCH_EXYNOS) += \
+	exynos2200-g0s.dtb		\
 	exynos5433-tm2.dtb		\
 	exynos5433-tm2e.dtb		\
 	exynos7-espresso.dtb		\
+	exynos7870-a2corelte.dtb	\
+	exynos7870-j6lte.dtb		\
+	exynos7870-on7xelte.dtb		\
 	exynos7885-jackpotlte.dtb	\
 	exynos850-e850-96.dtb		\
 	exynos8895-dreamlte.dtb		\
+	exynos9810-starlte.dtb		\
 	exynos990-c1s.dtb		\
+	exynos990-r8s.dtb               \
+	exynos990-x1s.dtb		\
+	exynos990-x1slte.dtb		\
 	exynosautov9-sadk.dtb		\
 	exynosautov920-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/axis/Makefile b/arch/arm64/boot/dts/exynos/axis/Makefile
new file mode 100644
index 000000000000..ccf00de64016
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_ARTPEC) += \
+	artpec8-grizzly.dtb
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h b/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
new file mode 100644
index 000000000000..2c151aa98c96
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Axis ARTPEC-8 SoC device tree pinctrl constants
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__
+
+#define ARTPEC_PIN_PULL_NONE		0
+#define ARTPEC_PIN_PULL_DOWN		1
+#define ARTPEC_PIN_PULL_UP		3
+
+#define ARTPEC_PIN_FUNC_INPUT		0
+#define ARTPEC_PIN_FUNC_OUTPUT		1
+#define ARTPEC_PIN_FUNC_2		2
+#define ARTPEC_PIN_FUNC_3		3
+#define ARTPEC_PIN_FUNC_4		4
+#define ARTPEC_PIN_FUNC_5		5
+#define ARTPEC_PIN_FUNC_6		6
+#define ARTPEC_PIN_FUNC_EINT		0xf
+#define ARTPEC_PIN_FUNC_F		ARTPEC_PIN_FUNC_EINT
+
+/* Drive strength for ARTPEC */
+#define ARTPEC_PIN_DRV_SR1		0x8
+#define ARTPEC_PIN_DRV_SR2		0x9
+#define ARTPEC_PIN_DRV_SR3		0xa
+#define ARTPEC_PIN_DRV_SR4		0xb
+#define ARTPEC_PIN_DRV_SR5		0xc
+#define ARTPEC_PIN_DRV_SR6		0xd
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__ */
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts b/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
new file mode 100644
index 000000000000..5ae864ec3193
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 Grizzly board device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+/dts-v1/;
+#include "artpec8.dtsi"
+#include "artpec8-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	model = "ARTPEC-8 grizzly board";
+	compatible = "axis,artpec8-grizzly", "axis,artpec8";
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&osc_clk {
+	clock-frequency = <50000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
new file mode 100644
index 000000000000..8d239a70f1b4
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#include "artpec-pinctrl.h"
+
+&pinctrl_fsys {
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe2: gpe2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	serial0_bus: serial0-bus-pins {
+		samsung,pins = "gpf4-4", "gpf4-5";
+		samsung,pin-function = <ARTPEC_PIN_FUNC_2>;
+		samsung,pin-pud = <ARTPEC_PIN_PULL_UP>;
+		samsung,pin-drv = <ARTPEC_PIN_DRV_SR3>;
+	};
+};
+
+&pinctrl_peric {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi
new file mode 100644
index 000000000000..db9833297982
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 SoC device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axis,artpec8-clk.h>
+
+/ {
+	compatible = "axis,artpec8";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		pinctrl0 = &pinctrl_fsys;
+		pinctrl1 = &pinctrl_peric;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+			clocks = <&cmu_cpucl CLK_GOUT_CPUCL_CLUSTER_CPU>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep: cpu-sleep {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	fin_pll: clock-finpll {
+		compatible = "fixed-factor-clock";
+		clocks = <&osc_clk>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "fin_pll";
+	};
+
+	osc_clk: clock-osc {
+		/* XXTI */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "osc_clk";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x17000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cmu_imem: clock-controller@10010000 {
+			compatible = "axis,artpec8-cmu-imem";
+			reg = <0x10010000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_IMEM_ACLK>,
+				 <&cmu_cmu CLK_DOUT_CMU_IMEM_JPEG>;
+			clock-names = "fin_pll", "aclk", "jpeg";
+		};
+
+		timer@10040000 {
+			compatible = "axis,artpec8-mct", "samsung,exynos4210-mct";
+			reg = <0x10040000 0x1000>;
+			clocks = <&fin_pll>, <&cmu_imem CLK_GOUT_IMEM_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@10201000 {
+			compatible = "arm,gic-400";
+			reg = <0x10201000 0x1000>,
+			      <0x10202000 0x2000>,
+			      <0x10204000 0x2000>,
+			      <0x10206000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cmu_cpucl: clock-controller@11410000 {
+			compatible = "axis,artpec8-cmu-cpucl";
+			reg = <0x11410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_CPUCL_SWITCH>;
+			clock-names = "fin_pll", "switch";
+		};
+
+		cmu_cmu: clock-controller@12400000 {
+			compatible = "axis,artpec8-cmu-cmu";
+			reg = <0x12400000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		cmu_core: clock-controller@12410000 {
+			compatible = "axis,artpec8-cmu-core";
+			reg = <0x12410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_CORE_MAIN>,
+				 <&cmu_cmu CLK_DOUT_CMU_CORE_DLP>;
+			clock-names = "fin_pll", "main", "dlp";
+		};
+
+		cmu_bus: clock-controller@12c10000 {
+			compatible = "axis,artpec8-cmu-bus";
+			reg = <0x12c10000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_BUS>,
+				 <&cmu_cmu CLK_DOUT_CMU_BUS_DLP>;
+			clock-names = "fin_pll", "bus", "dlp";
+		};
+
+		cmu_peri: clock-controller@16410000 {
+			compatible = "axis,artpec8-cmu-peri";
+			reg = <0x16410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_IP>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_AUDIO>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_DISP>;
+			clock-names = "fin_pll", "ip", "audio", "disp";
+		};
+
+		pinctrl_peric: pinctrl@165f0000 {
+			compatible = "axis,artpec8-pinctrl";
+			reg = <0x165f0000 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_fsys: clock-controller@16c10000 {
+			compatible = "axis,artpec8-cmu-fsys";
+			reg = <0x16c10000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN0>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN1>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_BUS>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_IP>;
+			clock-names = "fin_pll", "scan0", "scan1", "bus", "ip";
+		};
+
+		pinctrl_fsys: pinctrl@16c30000 {
+			compatible = "axis,artpec8-pinctrl";
+			reg = <0x16c30000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial_0: serial@16cc0000 {
+			compatible = "axis,artpec8-uart";
+			reg = <0x16cc0000 0x100>;
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_UART0_PCLK>,
+				 <&cmu_fsys CLK_GOUT_FSYS_UART0_SCLK_UART>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&serial0_bus>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts b/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts
new file mode 100644
index 000000000000..0e348c5cf7df
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S22+ (g0s/SM-S906B) device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos2200.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy S22+ (SM-S906B)";
+	compatible = "samsung,g0s", "samsung,exynos2200";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer {
+			compatible = "simple-framebuffer";
+			memory-region = <&cont_splash_mem>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/*
+	 * RTC clock (XrtcXTI); external, must be 32.768 kHz.
+	 *
+	 * TODO: Remove this once RTC clock is implemented properly as part of
+	 *       PMIC driver.
+	 */
+	rtcclk: clock-rtcclk {
+		compatible = "fixed-clock";
+		clock-output-names = "rtcclk";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_volup>;
+		pinctrl-names = "default";
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa3 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>,
+		      <0x8 0x80000000 0x1 0x7e000000>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented  */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f6200000 {
+			reg = <0x0 0xf6200000 0x0 (1080 * 2340 * 4)>;
+			no-map;
+		};
+
+		debug_kinfo_reserved: debug-kinfo-reserved@fcfff000 {
+			reg = <0x0 0xfcfff000 0x0 0x1000>;
+			no-map;
+		};
+
+		log_itmon: log-itmon@fffe0000 {
+			reg = <0x0 0xfffe0000 0x0 0x20000>;
+			no-map;
+		};
+	};
+};
+
+&cmu_hsi0 {
+	clocks = <&xtcxo>,
+		 <&rtcclk>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_NOC>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_DPOSC>,
+		 <&cmu_top CLK_DOUT_CMU_HSI0_USB32DRD>;
+	clock-names = "oscclk", "rtcclk", "noc", "dpgtc", "dposc", "usb";
+};
+
+/*
+ * cpu2 and cpu3 fail to come up consistently, which leads to a hang later
+ * in the boot process. Disable them until the issue is figured out.
+ */
+&cpu2 {
+	status = "fail";
+};
+
+&cpu3 {
+	status = "fail";
+};
+
+&ext_26m {
+	clock-frequency = <26000000>;
+};
+
+&ext_200m {
+	clock-frequency = <200000000>;
+};
+
+&mct_peris {
+	status = "okay";
+};
+
+&pinctrl_alive {
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
+
+&ppi_cluster0 {
+	affinity = <&cpu0 &cpu1>;
+};
+
+&usb {
+	/* TODO: Replace these once PMIC is implemented  */
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+	status = "okay";
+};
+
+&usb32drd {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	maximum-speed = "high-speed";
+};
+
+&usb_hsphy {
+	/* TODO: Replace these once PMIC is implemented  */
+	vdda12-supply = <&reg_dummy>;
+	vdd-supply = <&reg_dummy>;
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
new file mode 100644
index 000000000000..5877da7baf5c
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
@@ -0,0 +1,1765 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 2200 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpq1: gpq1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpq2: gpq2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	bt_hostwake: bt-hostwake-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpq0-3", "gpq0-2", "gpq0-1", "gpq0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	wlan_host_wake: wlan-host-wake-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm8: gpm8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm9: gpm9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm10: gpm10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm11: gpm11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm12: gpm12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm13: gpm13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm14: gpm14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm15: gpm15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm16: gpm16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm17: gpm17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm20: gpm20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm21: gpm21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm22: gpm22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm23: gpm23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpm24: gpm24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpm0-0", "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpm1-0", "gpm1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpm2-0", "gpm2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpm3-0", "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpm5-0", "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpm6-0", "gpm6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpm7-0", "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpm8-0", "gpm8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpm9-0", "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpm10-0", "gpm10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpm11-0", "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c36_bus: hsi2c36-bus-pins {
+		samsung,pins = "gpm12-0", "gpm12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c37_bus: hsi2c37-bus-pins {
+		samsung,pins = "gpm13-0", "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c38_bus: hsi2c38-bus-pins {
+		samsung,pins = "gpm23-0", "gpm24-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpm1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpm1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpm2-0", "gpm2-1", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpm4-0", "gpm4-1", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpm6-0", "gpm6-1", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi18_bus: spi18-bus-pins {
+		samsung,pins = "gpm12-0", "gpm12-1", "gpm13-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi18_cs: spi18-cs-pins {
+		samsung,pins = "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi18_cs_func: spi18-cs-func-pins {
+		samsung,pins = "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart14_bus_single: uart14-bus-single-pins {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpm0-0", "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_single: uart15-bus-single-pins {
+		samsung,pins = "gpm3-0", "gpm3-1", "gpm4-0", "gpm4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpm3-0", "gpm3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_single: uart16-bus-single-pins {
+		samsung,pins = "gpm5-0", "gpm5-1", "gpm6-0", "gpm6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpm5-0", "gpm5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_single: uart17-bus-single-pins {
+		samsung,pins = "gpm7-0", "gpm7-1", "gpm8-0", "gpm8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpm7-0", "gpm7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart18_bus_single: uart18-bus-single-pins {
+		samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0", "gpm9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart18_bus_dual: uart18-bus-dual-pins {
+		samsung,pins = "gpm8-0", "gpm8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart19_bus_single: uart19-bus-single-pins {
+		samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0", "gpm11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart19_bus_dual: uart19-bus-dual-pins {
+		samsung,pins = "gpm12-0", "gpm12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart20_bus_single: uart20-bus-single-pins {
+		samsung,pins = "gpm13-0", "gpm13-1", "gpm14-0", "gpm14-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart20_bus_dual: uart20-bus-dual-pins {
+		samsung,pins = "gpm13-0", "gpm13-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+};
+
+&pinctrl_hsi1 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_hsi1ufs {
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_i2s0_bus: aud-i2s0-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s1_bus: aud-i2s1-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s2_bus: aud-i2s2-bus-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s3_bus: aud-i2s3-bus-pins {
+		samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_i2s3_pci: aud-i2s3-pci-pins {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	aud_dsd_bus: aud-dsd-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	decon_0_te: decon-0-te-pins {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c0_bus: i3c0-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c1_bus: i3c1-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c2_bus: i3c2-bus-pins {
+		samsung,pins = "gpc2-0", "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart6_bus_single: uart6-bus-single-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-1", "gpp9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-1", "gpp10-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart9_bus_single: uart9-bus-single-pins {
+		samsung,pins = "gpp7-3", "gpp7-2", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_single: uart10-bus-single-pins {
+		samsung,pins = "gpp8-3", "gpp8-2", "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_single: uart11-bus-single-pins {
+		samsung,pins = "gpp9-3", "gpp9-2", "gpp9-1", "gpp9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_single: uart12-bus-single-pins {
+		samsung,pins = "gpp10-3", "gpp10-2", "gpp10-1", "gpp10-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+};
+
+&pinctrl_peric2 {
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc5: gpc5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc6: gpc6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc7: gpc7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc8: gpc8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc9: gpc9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp6-2", "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c3_bus: i3c3-bus-pins {
+		samsung,pins = "gpc3-0", "gpc3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c4_bus: i3c4-bus-pins {
+		samsung,pins = "gpc4-0", "gpc4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c5_bus: i3c5-bus-pins {
+		samsung,pins = "gpc5-0", "gpc5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c6_bus: i3c6-bus-pins {
+		samsung,pins = "gpc6-0", "gpc6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c7_bus: i3c7-bus-pins {
+		samsung,pins = "gpc7-0", "gpc7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c8_bus: i3c8-bus-pins {
+		samsung,pins = "gpc8-0", "gpc8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c9_bus: i3c9-bus-pins {
+		samsung,pins = "gpc9-0", "gpc9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c10_bus: i3c10-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	i3c11_bus: i3c11-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp6-2", "gpp6-1", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-1", "gpp11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart0_bus_single: uart0-bus-single-pins {
+		samsung,pins = "gpg0-2", "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	uart2_bus_single: uart2-bus-single-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_single: uart3-bus-single-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_single: uart4-bus-single-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_single: uart5-bus-single-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_single: uart7-bus-single-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_single: uart8-bus-single-pins {
+		samsung,pins = "gpp6-3", "gpp6-2", "gpp6-1", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_single: uart13-bus-single-pins {
+		samsung,pins = "gpp11-3", "gpp11-2", "gpp11-1", "gpp11-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_ufs {
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_vts {
+	gpv0: gpv0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	amic_pdm0_bus: amic-pdm0-bus-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	amic_pdm1_bus: amic-pdm1-bus-pins {
+		samsung,pins = "gpv0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	amic_pdm2_bus: amic-pdm2-bus-pins {
+		samsung,pins = "gpv0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk0: dmic-bus-clk0-pins {
+		samsung,pins = "gpv0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk1: dmic-bus-clk1-pins {
+		samsung,pins = "gpv0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_bus_clk2: dmic-bus-clk2-pins {
+		samsung,pins = "gpv0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm0_bus: dmic-pdm0-bus-pins {
+		samsung,pins = "gpv0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm1_bus: dmic-pdm1-bus-pins {
+		samsung,pins = "gpv0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+
+	dmic_pdm2_bus: dmic-pdm2-bus-pins {
+		samsung,pins = "gpv0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200.dtsi b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
new file mode 100644
index 000000000000..6487ccb58ae7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
@@ -0,0 +1,1923 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 2200 SoC device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/clock/samsung,exynos2200-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynos2200";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_cmgp;
+		pinctrl2 = &pinctrl_hsi1;
+		pinctrl3 = &pinctrl_ufs;
+		pinctrl4 = &pinctrl_hsi1ufs;
+		pinctrl5 = &pinctrl_peric0;
+		pinctrl6 = &pinctrl_peric1;
+		pinctrl7 = &pinctrl_peric2;
+		pinctrl8 = &pinctrl_vts;
+	};
+
+	xtcxo: clock-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	ext_26m: clock-2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_200m: clock-3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-200m";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x100>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x200>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0x300>;
+			capacity-dmips-mhz = <260>;
+			dynamic-power-coefficient = <189>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0x400>;
+			capacity-dmips-mhz = <380>;
+			dynamic-power-coefficient = <560>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0x500>;
+			capacity-dmips-mhz = <380>;
+			dynamic-power-coefficient = <560>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0x600>;
+			capacity-dmips-mhz = <380>;
+			dynamic-power-coefficient = <560>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x2";
+			reg = <0x700>;
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <765>;
+			enable-method = "psci";
+			cpu-idle-states = <&prime_cpu_sleep>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			little_cpu_sleep: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "c2";
+				entry-latency-us = <70>;
+				exit-latency-us = <170>;
+				min-residency-us = <2000>;
+				arm,psci-suspend-param = <0x10000>;
+			};
+
+			big_cpu_sleep: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "c2";
+				entry-latency-us = <235>;
+				exit-latency-us = <220>;
+				min-residency-us = <3500>;
+				arm,psci-suspend-param = <0x10000>;
+			};
+
+			prime_cpu_sleep: cpu-sleep-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "c2";
+				entry-latency-us = <150>;
+				exit-latency-us = <190>;
+				min-residency-us = <2500>;
+				arm,psci-suspend-param = <0x10000>;
+			};
+		};
+	};
+
+	pmu-a510 {
+		compatible = "arm,cortex-a510-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a710 {
+		compatible = "arm,cortex-a710-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	pmu-x2 {
+		compatible = "arm,cortex-x2-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos2200-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		cmu_peris: clock-controller@10020000 {
+			compatible = "samsung,exynos2200-cmu-peris";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_GIC>;
+			clock-names = "tcxo_div3",
+				      "noc",
+				      "gic";
+		};
+
+		mct_peris: timer@10040000 {
+			compatible = "samsung,exynos2200-mct-peris",
+				     "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>, <&cmu_peris CLK_MOUT_PERIS_GIC>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 943 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 944 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 947 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 948 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 949 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x10200000 0x10000>,     /* GICD */
+			      <0x10240000 0x200000>;    /* GICR * 8 */
+
+			#address-cells = <0>;
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu7>;
+				};
+			};
+		};
+
+		cmu_peric0: clock-controller@10400000 {
+			compatible = "samsung,exynos2200-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP1>;
+			clock-names = "oscclk", "noc", "ip0", "ip1";
+		};
+
+		syscon_peric0: syscon@10420000 {
+			compatible = "samsung,exynos2200-peric0-sysreg", "syscon";
+			reg = <0x10420000 0x10000>;
+		};
+
+		pinctrl_peric0: pinctrl@10430000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x10430000 0x1000>;
+		};
+
+		usi4: usi@105000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x105000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI04>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric0 0x1024>;
+			status = "disabled";
+
+			hsi2c_8: i2c@10500000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10500000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_DOUT_PERIC0_USI04>,
+					 <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_6: serial@10500000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10500000 0xc0>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart6_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi4_i2c: usi@105100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x105100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric0 0x1024>;
+			status = "disabled";
+
+			hsi2c_9: i2c@10510000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10510000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_DOUT_PERIC0_I2C>,
+					 <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_peric1: clock-controller@10700000 {
+			compatible = "samsung,exynos2200-cmu-peric1";
+			reg = <0x10700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP1>;
+			clock-names = "oscclk", "noc", "ip0", "ip1";
+		};
+
+		syscon_peric1: syscon@10720000 {
+			compatible = "samsung,exynos2200-peric1-sysreg", "syscon";
+			reg = <0x10720000 0x10000>;
+		};
+
+		pinctrl_peric1: pinctrl@10730000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x10730000 0x1000>;
+		};
+
+		usi7: usi@109000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI07>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2030>;
+			status = "disabled";
+
+			hsi2c_14: i2c@10900000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10900000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI07>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_9: serial@10900000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10900000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI07>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart9_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi7_i2c: usi@109100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI07_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x2034>;
+			status = "disabled";
+
+			hsi2c_15: i2c@10910000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10910000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI07_SPI_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c15_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi8: usi@109200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI08>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2038>;
+			status = "disabled";
+
+			hsi2c_16: i2c@10920000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10920000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI08>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c16_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_10: serial@10920000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10920000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI08>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart10_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi8_i2c: usi@109300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI08_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x203c>;
+			status = "disabled";
+
+			hsi2c_17: i2c@10930000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10930000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI08_SPI_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c17_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@109400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI09>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2040>;
+			status = "disabled";
+
+			hsi2c_18: i2c@10940000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10940000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI09>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c18_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_11: serial@10940000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10940000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart11_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi9_i2c: usi@109500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x2044>;
+			status = "disabled";
+
+			hsi2c_19: i2c@10950000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10950000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c19_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@109600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI10>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2048>;
+			status = "disabled";
+
+			hsi2c_20: i2c@10960000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10960000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI10>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c20_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_12: serial@10960000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10960000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart12_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi10_i2c: usi@109700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x204c>;
+			status = "disabled";
+
+			hsi2c_21: i2c@10970000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10970000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c21_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+		};
+
+		cmu_hsi0: clock-controller@10a00000 {
+			compatible = "samsung,exynos2200-cmu-hsi0";
+			reg = <0x10a00000 0x8000>;
+			#clock-cells = <1>;
+		};
+
+		usb32drd: phy@10aa0000 {
+			compatible = "samsung,exynos2200-usb32drd-phy";
+			reg = <0x10aa0000 0x10000>;
+
+			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
+			clock-names = "phy";
+
+			#phy-cells = <1>;
+			phys = <&usb_hsphy>;
+			phy-names = "hs";
+
+			samsung,pmu-syscon = <&pmu_system_controller>;
+
+			status = "disabled";
+		};
+
+		usb_hsphy: phy@10ab0000 {
+			compatible = "samsung,exynos2200-eusb2-phy";
+			reg = <0x10ab0000 0x10000>;
+
+			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>,
+				 <&cmu_hsi0 CLK_MOUT_HSI0_NOC>,
+				 <&cmu_hsi0 CLK_DOUT_DIV_CLK_HSI0_EUSB>;
+			clock-names = "ref", "bus", "ctrl";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb: usb@10b00000 {
+			compatible = "samsung,exynos2200-dwusb3";
+			ranges = <0x0 0x10b00000 0x10000>;
+
+			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
+			clock-names = "link_aclk";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			usb_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+
+				clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>;
+				clock-names = "ref";
+
+				interrupts = <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH 0>;
+
+				phys = <&usb32drd 0>;
+				phy-names = "usb2-phy";
+
+				snps,dis-u2-freeclk-exists-quirk;
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,has-lpm-erratum;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,usb3_lpm_capable;
+			};
+		};
+
+		cmu_ufs: clock-controller@11000000 {
+			compatible = "samsung,exynos2200-cmu-ufs";
+			reg = <0x11000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_UFS_NOC>,
+				 <&cmu_top CLK_MOUT_CMU_UFS_MMC_CARD>,
+				 <&cmu_top CLK_DOUT_CMU_UFS_UFS_EMBD>;
+			clock-names = "oscclk", "noc", "mmc", "ufs";
+		};
+
+		syscon_ufs: syscon@11020000 {
+			compatible = "samsung,exynos2200-ufs-sysreg", "syscon";
+			reg = <0x11020000 0x10000>;
+		};
+
+		pinctrl_ufs: pinctrl@11040000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11040000 0x1000>;
+		};
+
+		pinctrl_hsi1ufs: pinctrl@11060000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11060000 0x1000>;
+		};
+
+		pinctrl_hsi1: pinctrl@11240000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11240000 0x1000>;
+		};
+
+		cmu_peric2: clock-controller@11c00000 {
+			compatible = "samsung,exynos2200-cmu-peric2";
+			reg = <0x11c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC2_NOC>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC2_IP0>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC2_IP1>;
+			clock-names = "oscclk", "noc", "ip0", "ip1";
+		};
+
+		syscon_peric2: syscon@11c20000 {
+			compatible = "samsung,exynos2200-peric2-sysreg", "syscon";
+			reg = <0x11c20000 0x10000>;
+		};
+
+		pinctrl_peric2: pinctrl@11c30000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x11c30000 0x1000>;
+		};
+
+		usi0: usi@11d000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI00>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2000>;
+			status = "disabled";
+
+			hsi2c_0: i2c@11d00000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d00000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI00>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c0_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_2: serial@11d00000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d00000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI00>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart2_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi0_i2c: usi@11d100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI00_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x2004>;
+			status = "disabled";
+
+			hsi2c_1: i2c@11d10000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI00_SPI_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c1_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi1: usi@11d200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI01>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2008>;
+			status = "disabled";
+
+			hsi2c_2: i2c@11d20000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI01>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c2_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_3: serial@11d20000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d20000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI01>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart3_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi1_i2c: usi@11d300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI01_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x200c>;
+			status = "disabled";
+
+			hsi2c_3: i2c@11d30000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI01_SPI_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 705 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c3_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@11d400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI02>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2010>;
+			status = "disabled";
+
+			hsi2c_4: i2c@11d40000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI02>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c4_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_4: serial@11d40000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d40000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI02>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart4_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi2_i2c: usi@11d500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x2014>;
+			status = "disabled";
+
+			hsi2c_5: i2c@11d50000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d50000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@11d600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI03>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2018>;
+			status = "disabled";
+
+			hsi2c_6: i2c@11d60000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI03>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_5: serial@11d60000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d60000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI03>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart5_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi3_i2c: usi@11d700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x201c>;
+			status = "disabled";
+
+			hsi2c_7: i2c@11d70000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d70000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c7_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5_i2c: usi@11d800c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d800c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x102c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@11d80000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d80000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi6_i2c: usi@11d900c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d900c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x1004>;
+			status = "disabled";
+
+			hsi2c_13: i2c@11d90000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d90000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@11da00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11da00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI11>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x1058>;
+			status = "disabled";
+
+			hsi2c_22: i2c@11da0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11da0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI11>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c22_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_13: serial@11da0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11da0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI11>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart13_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi11_i2c: usi@11db00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11db00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x105c>;
+			status = "disabled";
+
+			hsi2c_23: i2c@11db0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11db0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c23_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@11dd00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11dd00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI05>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x117c>;
+			status = "disabled";
+
+			hsi2c_10: i2c@11dd0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11dd0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI05>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_7: serial@11dd0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11dd0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI05>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart7_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@11de00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11de00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI06>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x1180>;
+			status = "disabled";
+
+			hsi2c_12: i2c@11de0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11de0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI06>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_8: serial@11de0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11de0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI06>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart8_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		cmu_cmgp: clock-controller@14e00000 {
+			compatible = "samsung,exynos2200-cmu-cmgp";
+			reg = <0x14e00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_alive CLK_DOUT_ALIVE_CMGP_NOC>,
+				 <&cmu_alive CLK_DOUT_ALIVE_CMGP_PERI>;
+			clock-names = "oscclk", "noc", "peri";
+		};
+
+		syscon_cmgp: syscon@14e20000 {
+			compatible = "samsung,exynos2200-cmgp-sysreg", "syscon";
+			reg = <0x14e20000 0x10000>;
+		};
+
+		pinctrl_cmgp: pinctrl@14e30000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x14e30000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos2200-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		usi_cmgp0: usi@14f000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI0>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2000>;
+			status = "disabled";
+
+			hsi2c_24: i2c@14f00000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f00000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI0>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c24_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_14: serial@14f00000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f00000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI0>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart14_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp0: usi@14f100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C0>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2070>;
+			status = "disabled";
+
+			hsi2c_25: i2c@14f10000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C0>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c25_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp1: usi@14f200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2010>;
+			status = "disabled";
+
+			hsi2c_26: i2c@14f20000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI1>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c26_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_15: serial@14f20000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f20000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI1>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart15_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp1: usi@14f300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C1>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2074>;
+			status = "disabled";
+
+			hsi2c_27: i2c@14f30000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C1>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c27_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp2: usi@14f400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2020>;
+			status = "disabled";
+
+			hsi2c_28: i2c@14f40000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI2>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c28_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_16: serial@14f40000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f40000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart16_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp2: usi@14f500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2024>;
+			status = "disabled";
+
+			hsi2c_29: i2c@14f50000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f50000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c29_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp3: usi@14f600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2030>;
+			status = "disabled";
+
+			hsi2c_30: i2c@14f60000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI3>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c30_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_17: serial@14f60000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f60000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI3>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart17_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp3: usi@14f700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2034>;
+			status = "disabled";
+
+			hsi2c_31: i2c@14f70000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f70000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c31_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp4: usi@14f800c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f800c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2040>;
+			status = "disabled";
+
+			hsi2c_32: i2c@14f80000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f80000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI4>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c32_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_18: serial@14f80000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f80000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI4>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart18_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp4: usi@14f900c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f900c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2044>;
+			status = "disabled";
+
+			hsi2c_33: i2c@14f90000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f90000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c33_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp5: usi@14fa00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fa00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2050>;
+			status = "disabled";
+
+			hsi2c_34: i2c@14fa0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fa0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI5>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c34_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_19: serial@14fa0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14fa0000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI5>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart19_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp5: usi@14fb00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fb00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2054>;
+			status = "disabled";
+
+			hsi2c_35: i2c@14fb0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fb0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c35_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp6: usi@14fc00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fc00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2060>;
+			status = "disabled";
+
+			hsi2c_36: i2c@14fc0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fc0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI6>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c36_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_20: serial@14fc0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14fc0000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI6>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart20_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp6: usi@14fd00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fd00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2064>;
+			status = "disabled";
+
+			hsi2c_37: i2c@14fd0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fd0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c37_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp7: usi@14fe00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fe00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2080>;
+			status = "disabled";
+
+			hsi2c_38: i2c@14fe0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fe0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c38_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		cmu_vts: clock-controller@15300000 {
+			compatible = "samsung,exynos2200-cmu-vts";
+			reg = <0x15300000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_VTS_DMIC>;
+			clock-names = "oscclk", "dmic";
+		};
+
+		pinctrl_vts: pinctrl@15320000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x15320000 0x1000>;
+		};
+
+		cmu_alive: clock-controller@15800000 {
+			compatible = "samsung,exynos2200-cmu-alive";
+			reg = <0x15800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top CLK_DOUT_CMU_ALIVE_NOC>;
+			clock-names = "oscclk", "noc";
+		};
+
+		pinctrl_alive: pinctrl@15850000 {
+			compatible = "samsung,exynos2200-pinctrl";
+			reg = <0x15850000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos2200-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@15860000 {
+			compatible = "samsung,exynos2200-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x15860000 0x10000>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x3c00>; /* SYSTEM_CONFIGURATION */
+				mask = <0x2>; /* SWRESET_SYSTEM */
+				value = <0x2>; /* reset value */
+			};
+		};
+
+		cmu_top: clock-controller@1a320000 {
+			compatible = "samsung,exynos2200-cmu-top";
+			reg = <0x1a320000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>;
+			clock-names = "oscclk";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <25600000>;
+	};
+};
+
+#include "exynos2200-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 8f02de8480b6..a1fb354dea9f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -85,7 +85,7 @@
 		};
 	};
 
-	i2c_max98504: i2c-gpio-0 {
+	i2c_max98504: i2c-13 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
 		scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 0b9053b9b2b5..fa2029e280a5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -937,6 +937,7 @@
 
 		gic: interrupt-controller@11001000 {
 			compatible = "arm,gic-400";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x11001000 0x1000>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
new file mode 100644
index 000000000000..6f40ca4350ed
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
@@ -0,0 +1,660 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy A2 Core (a2corelte) device tree source
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy A2 Core";
+	compatible = "samsung,a2corelte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3f200000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_fixed_proxled: regulator-fixed-proxled {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_proxled";
+		regulator-boot-on;
+		regulator-always-on;
+		gpio = <&gpd4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46800000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46800000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		cont_splash_mem: framebuffer@67000000 {
+			reg = <0x0 0x67000000 (540 * 960 * 4)>;
+			iommu-addresses = <&decon 0x67000000 (540 * 960 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&decon {
+	memory-region = <&cont_splash_mem>;
+
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,burst-clock-frequency = <836000000>;
+	samsung,esc-clock-frequency = <16000000>;
+	samsung,pll-clock-frequency = <26000000>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "syna,td4101-panel";
+		reg = <0>;
+
+		backlight-gpios = <&gpd3 7 GPIO_ACTIVE_LOW>;
+
+		width-mm = <62>;
+		height-mm = <110>;
+
+		panel-timing {
+			clock-frequency = <69336720>;
+
+			hactive = <540>;
+			hsync-len = <4>;
+			hfront-porch = <364>;
+			hback-porch = <40>;
+
+			vactive = <960>;
+			vsync-len = <2>;
+			vfront-porch = <244>;
+			vback-porch = <13>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* touchscreen: vdd */
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2ds12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		st,drdy-int-pin = <1>;
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3013", "sensortek,stk3310";
+		reg = <0x48>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&proxm_irq>;
+
+		proximity-near-level = <25>;
+	};
+};
+
+&i2c6 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		vdd-supply = <&vdd_ldo35>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+			syna,clip-x-high = <539>;
+			syna,clip-y-high = <959>;
+			touchscreen-x-mm = <62>;
+			touchscreen-y-mm = <110>;
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	bus-width = <8>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	proxm_irq: proxm-irq-pins {
+		samsung,pins = "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
new file mode 100644
index 000000000000..09f2367cfec9
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
@@ -0,0 +1,624 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy J6 (j6lte) device tree source
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy J6";
+	compatible = "samsung,j6lte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	gpio-hall-effect-sensor {
+		compatible = "gpio-keys";
+		label = "GPIO Hall Effect Sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_irq>;
+
+		event-hall-effect-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&gpa1 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3d800000>,
+		      <0x0 0x80000000 0x40000000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46e00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46e00000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		cont_splash_mem: framebuffer@67000000 {
+			reg = <0x0 0x67000000 (720 * 1480 * 4)>;
+			iommu-addresses = <&decon 0x67000000 (720 * 1480 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&decon {
+	memory-region = <&cont_splash_mem>;
+
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,burst-clock-frequency = <500000000>;
+	samsung,esc-clock-frequency = <16000000>;
+	samsung,pll-clock-frequency = <26000000>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e8aa5x01-ams561ra01";
+		reg = <0>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* touchscreen: vdd */
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2ds12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		mount-matrix = "-1", "0",  "0",
+				"0", "1",  "0",
+				"0", "0", "-1";
+
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&i2c6 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt532";
+		reg = <0x20>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1480>;
+
+		vdd-supply = <&vdd_ldo34>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	bus-width = <8>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hall_irq: hall-irq-pins {
+		samsung,pins = "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
new file mode 100644
index 000000000000..29e124c72e9d
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
@@ -0,0 +1,692 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy J7 Prime (on7xelte) device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+/dts-v1/;
+#include "exynos7870.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy J7 Prime";
+	compatible = "samsung,on7xelte", "samsung,exynos7870";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "GPIO Keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_home &key_power &key_voldown &key_volup>;
+
+		key-home {
+			label = "Home Key";
+			gpios = <&gpa1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+
+		key-power {
+			label = "Power Key";
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-voldown {
+			label = "Volume Down Key";
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volup {
+			label = "Volume Up Key";
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x3e400000>,
+		      <0x0 0x80000000 0x80000000>;
+	};
+
+	pwrseq_mmc1: pwrseq-mmc1 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	/* mmc2: vmmc */
+	vdd_fixed_mmc2: regulator-fixed-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_mmc2";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpio = <&gpc0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@46e00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x46e00000 0x8000>;
+			console-size = <0x4000>;
+			pmsg-size = <0x4000>;
+		};
+
+		cont_splash_mem: framebuffer@67000000 {
+			reg = <0x0 0x67000000 (1080 * 1920 * 4)>;
+			iommu-addresses = <&decon 0x67000000 (1080 * 1920 * 4)>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&vdd_ldo32>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&decon {
+	memory-region = <&cont_splash_mem>;
+
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,burst-clock-frequency = <1001000000>;
+	samsung,esc-clock-frequency = <16000000>;
+	samsung,pll-clock-frequency = <26000000>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "syna,td4300-panel";
+		reg = <0>;
+
+		backlight-gpios = <&gpd3 5 GPIO_ACTIVE_LOW>;
+
+		width-mm = <68>;
+		height-mm = <121>;
+
+		panel-timing {
+			clock-frequency = <144389520>;
+
+			hactive = <1080>;
+			hsync-len = <4>;
+			hfront-porch = <120>;
+			hback-porch = <32>;
+
+			vactive = <1920>;
+			vsync-len = <2>;
+			vfront-porch = <21>;
+			vback-porch = <4>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsi2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mpu05-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpa0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+
+		regulators {
+			vdd_buck1: buck1 {
+				regulator-name = "vdd_buck1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck2: buck2 {
+				regulator-name = "vdd_buck2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck3: buck3 {
+				regulator-name = "vdd_buck3";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck4: buck4 {
+				regulator-name = "vdd_buck4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_buck5: buck5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc2: vqmmc */
+			vdd_ldo2: ldo2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* usbdrd: vdd33 */
+			vdd_ldo8: ldo8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo25: ldo25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vmmc */
+			vdd_ldo26: ldo26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* mmc0: vqmmc */
+			vdd_ldo27: ldo27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo29: ldo29 {
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo30: ldo30 {
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo31: ldo31 {
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vibrator: haptic */
+			vdd_ldo32: ldo32 {
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+			};
+
+			vdd_ldo33: ldo33 {
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo34: ldo34 {
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-ramp-delay = <12000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ldo35: ldo35 {
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	touchscreen@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		interrupt-parent = <&gpc3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+			syna,clip-x-high = <1079>;
+			syna,clip-y-high = <1919>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <121>;
+		};
+	};
+};
+
+&i2c7 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+		interrupt-parent = <&gpa2>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq>;
+
+		mount-matrix = "1",  "0",  "0",
+			       "0", "-1",  "0",
+			       "0",  "0", "-1";
+
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&i2c8 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	status = "okay";
+
+	proximity@48 {
+		compatible = "sensortek,stk3013", "sensortek,stk3310";
+		reg = <0x48>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&proxm_irq>;
+
+		proximity-near-level = <25>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	vmmc-supply = <&vdd_ldo26>;
+	vqmmc-supply = <&vdd_ldo27>;
+
+	bus-width = <8>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	non-removable;
+
+	status = "okay";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+
+	mmc-pwrseq = <&pwrseq_mmc1>;
+
+	bus-width = <4>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpa2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+
+	vmmc-supply = <&vdd_fixed_mmc2>;
+	vqmmc-supply = <&vdd_ldo2>;
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	fifo-depth = <64>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	broken-cd;
+	disable-wp;
+
+	status = "okay";
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	accel_irq: accel-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	dwmmc2_irq: dwmmc2-irq-pins {
+		samsung,pins = "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fuel_irq: fuel-irq-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_home: key-home-pins {
+		samsung,pins = "gpa1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	proxm_irq: proxm-irq-pins {
+		samsung,pins = "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	tkey_irq: tkey-irq-pins {
+		samsung,pins = "gpa1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	wlan_hostwake: wlan-hostwake-pins {
+		samsung,pins = "gpa2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_top {
+	bt_enable: bt-enable-pins {
+		samsung,pins = "gpd4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlan_enable: wlan-enable-pins {
+		samsung,pins = "gpd3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+		samsung,pin-val = <0>;
+	};
+};
+
+&pinctrl_touch {
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+
+		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpd4 1 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3000000>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd33-supply = <&vdd_ldo8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi
new file mode 100644
index 000000000000..99a28d06aee7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870-pinctrl.dtsi
@@ -0,0 +1,1021 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7870 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	etc0: etc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	bt_btwake: bt-btwake-pins {
+		samsung,pins = "gpa1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_hostwake: bt-hostwake-pins {
+		samsung,pins = "gpa1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gnss_sensor_i2c: gnss-sensor-i2c-pins {
+		samsung,pins = "gpa2-5", "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gnss_sensor_irq: gnss-sensor-irq-pins {
+		samsung,pins = "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	nfc_int: nfc-int-pins {
+		samsung,pins = "gpa2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpa1-1", "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_sleep: uart2-sleep-pins {
+		samsung,pins = "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_dispaud {
+	gpz0: gpz0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz2: gpz2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s_amp_bus: i2s-amp-bus-pins {
+		samsung,pins = "gpz1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_amp_bus_idle: i2s-amp-bus-idle-pins {
+		samsung,pins = "gpz1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_bt_bus: i2s-bt-bus-pins {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_bt_bus_idle: i2s-bt-bus-idle-pins {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_pmic_amp_bus: i2s-pmic-amp-bus-pins {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_amp_bus_idle: i2s-pmic-amp-bus-idle-pins {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_bus: i2s-pmic-bus-pins {
+		samsung,pins = "gpz1-0", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_pmic_bus_idle: i2s-pmic-bus-idle-pins {
+		samsung,pins = "gpz1-0", "gpz1-2", "gpz1-3", "gpz1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	i2s_fm_bus: i2s-fm-bus-pins {
+		samsung,pins = "gpz2-0", "gpz2-1", "gpz2-2", "gpz2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	i2s_fm_bus_idle: i2s-fm-bus-idle-pins {
+		samsung,pins = "gpz2-0", "gpz2-1", "gpz2-2", "gpz2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+};
+
+&pinctrl_ese {
+	gpc7: gpc7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpc7-3", "gpc7-2", "gpc7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	spi0_cs0: spi0-cs0-pins {
+		samsung,pins = "gpc7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	spi0_cs1: spi0-cs1-pins {
+		samsung,pins = "gpc7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_fsys {
+	gpr0: gpr0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr4: gpr4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_clk_fast_slew_rate_5x: sd0-clk-fast-slew-rate-5x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR5>;
+	};
+
+	sd0_clk_fast_slew_rate_6x: sd0-clk-fast-slew-rate-6x-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR6>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd0_rdqs: sd0-rdqs-pins {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpr4-3", "gpr4-4", "gpr4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+};
+
+&pinctrl_mif {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpm0-1", "gpm0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_nfc {
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_en: nfc-en-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+		samsung,pin-val = <1>;
+	};
+
+	nfc_n5_clk_req: nfc-n5-clk-req-pins {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_pd: nfc-pd-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_top {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc5: gpc5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc6: gpc6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc8: gpc8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc9: gpc9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	decon_te_off: decon-te-off-pins {
+		samsung,pins = "gpe0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+	};
+
+	decon_te_on: decon-te-on-pins {
+		samsung,pins = "gpe0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	ese_pvdd_en: ese-pvdd-en-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	fimc_is_flash: fimc-is-flash-pins {
+		samsung,pins = "gpd3-2", "gpd3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk0_fn: fimc-is-mclk0-fn-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	fimc_is_mclk0_in: fimc-is-mclk0-in-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk0_out: fimc-is-mclk0-out-pins {
+		samsung,pins = "gpe0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk1_fn: fimc-is-mclk1-fn-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR2>;
+	};
+
+	fimc_is_mclk1_in: fimc-is-mclk1-in-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_mclk1_out: fimc-is-mclk1-out-pins {
+		samsung,pins = "gpe0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk2_fn: fimc-is-mclk2-fn-pins {
+		samsung,pins = "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	fimc_is_mclk2_out: fimc-is-mclk2-out-pins {
+		samsung,pins = "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+		samsung,pin-val = <0>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpf0-1", "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpf1-1", "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpf0-3", "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpf2-1", "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpf3-0", "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpc4-1", "gpc4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpc8-1", "gpc8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpc9-1", "gpc9-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpc1-1", "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpc1-3", "gpc1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpc4-3", "gpc4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2c8_bus: i2c8-bus-pins {
+		samsung,pins = "gpc5-1", "gpc5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	nfc_n5_firm: nfc-n5-firm-pins {
+		samsung,pins = "gpd4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-val = <1>;
+	};
+
+	nfc_pvdd_en: nfc-pvdd-en-pins {
+		samsung,pins = "gpd2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpf3-3", "gpf3-2", "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_cs0: spi1-cs0-pins {
+		samsung,pins = "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_cs1: spi1-cs1-pins {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpf4-3", "gpf4-2", "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_cs0: spi2-cs0-pins {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi2_cs1: spi2-cs1-pins {
+		samsung,pins = "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpc6-0", "gpc6-2", "gpc6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_bus_suspend: spi3-bus-suspend-pins {
+		samsung,pins = "gpc6-0", "gpc6-2", "gpc6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpc6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpc4-2", "gpc5-0", "gpc5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_miso: spi4-miso-pins {
+		samsung,pins = "gpc5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	spi4_mosi_sck_ssn: spi4-mosi-sck-ssn-pins {
+		samsung,pins = "gpc5-1", "gpc4-2", "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pins = "gpd2-3", "gpd2-2", "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pins = "gpb0-3", "gpb0-2", "gpb0-1", "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+};
+
+&pinctrl_touch {
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpc3-1", "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	ese_cs_func: ese-cs-func-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+		samsung,pin-val = <1>;
+	};
+
+	ese_cs_func_suspend: ese-cs-func-suspend-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7870.dtsi b/arch/arm64/boot/dts/exynos/exynos7870.dtsi
new file mode 100644
index 000000000000..2827e10d6962
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7870.dtsi
@@ -0,0 +1,797 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7870 SoC device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <dt-bindings/clock/samsung,exynos7870-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos7870";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_dispaud;
+		pinctrl2 = &pinctrl_ese;
+		pinctrl3 = &pinctrl_fsys;
+		pinctrl4 = &pinctrl_mif;
+		pinctrl5 = &pinctrl_nfc;
+		pinctrl6 = &pinctrl_top;
+		pinctrl7 = &pinctrl_touch;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: oscclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10100000 {
+			compatible = "samsung,exynos7870-chipid",
+				     "samsung,exynos4210-chipid";
+			reg = <0x10100000 0x100>;
+		};
+
+		cmu_peri: clock-controller@101f0000 {
+			compatible = "samsung,exynos7870-cmu-peri";
+			reg = <0x101f0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "spi0", "spi1", "spi2",
+				      "spi3", "spi4", "uart0", "uart1", "uart2";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI0>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI1>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI2>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI3>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_SPI4>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART0>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART1>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_PERI_UART2>;
+		};
+
+		cmu_mif: clock-controller@10460000 {
+			compatible = "samsung,exynos7870-cmu-mif";
+			reg = <0x10460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk";
+			clocks = <&oscclk>;
+		};
+
+		pmu_system_controller: system-controller@10480000 {
+			compatible = "samsung,exynos7870-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x10480000 0x10000>;
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,exynos7870-mipi-video-phy";
+				#phy-cells = <1>;
+
+				samsung,cam0-sysreg = <&syscon_cam0>;
+				samsung,disp-sysreg = <&syscon_disp>;
+			};
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x080c>;
+				mode-bootloader = <0x1234567d>;
+				mode-download = <0x12345671>;
+				mode-recovery = <0x12345674>;
+			};
+		};
+
+		gic: interrupt-controller@104e1000 {
+			compatible = "arm,cortex-a15-gic";
+			reg = <0x104e1000 0x1000>,
+			      <0x104e2000 0x1000>,
+			      <0x104e4000 0x2000>,
+			      <0x104e6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <3>;
+		};
+
+		hsi2c0: i2c@10510000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x10510000 0x2000>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c0_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_mif CLK_GOUT_MIF_HSI2C_IPCLK>;
+
+			status = "disabled";
+		};
+
+		pinctrl_mif: pinctrl@10530000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x10530000 0x1000>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gpu: gpu@11400000 {
+			compatible = "samsung,exynos7870-mali", "arm,mali-t830";
+			reg = <0x11400000 0x5000>;
+			interrupt-names = "job", "mmu", "gpu";
+			interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "core", "bus";
+			clocks = <&cmu_g3d CLK_GOUT_G3D_CLK>,
+				 <&cmu_g3d CLK_GOUT_G3D_ASYNCS_D0_CLK>;
+
+			status = "disabled";
+		};
+
+		cmu_g3d: clock-controller@11460000 {
+			compatible = "samsung,exynos7870-cmu-g3d";
+			reg = <0x11460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "switch";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_G3D_SWITCH>;
+		};
+
+		cmu_mfcmscl: clock-controller@12cb0000 {
+			compatible = "samsung,exynos7870-cmu-mfcmscl";
+			reg = <0x12cb0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "mfc", "mscl";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_MFCMSCL_MFC>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_MFCMSCL_MSCL>;
+		};
+
+		mmc0: mmc@13540000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13540000 0x2000>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC0_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC0>;
+
+			status = "disabled";
+		};
+
+		mmc1: mmc@13550000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13550000 0x2000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC1_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC1>;
+
+			status = "disabled";
+		};
+
+		mmc2: mmc@13560000 {
+			compatible = "samsung,exynos7870-dw-mshc-smu";
+			reg = <0x13560000 0x2000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "biu", "ciu";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MMC2_ACLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_MMC2>;
+
+			status = "disabled";
+		};
+
+		usbdrd_phy: phy@135c0000 {
+			compatible = "samsung,exynos7870-usbdrd-phy";
+			reg = <0x135c0000 0x100>;
+			#phy-cells = <1>;
+
+			clock-names = "phy", "ref";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_MUX_USB20DRD_PHYCLOCK_USER>,
+				 <&cmu_fsys CLK_GOUT_FSYS_MUX_USB_PLL>;
+
+			samsung,pmu-syscon = <&pmu_system_controller>;
+		};
+
+		usbdrd: usb@13600000 {
+			compatible = "samsung,exynos7870-dwusb3";
+			ranges = <0x0 0x13600000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			clock-names = "bus_early", "ref", "ctrl";
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_ACLK_HSDRD>,
+				 <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_HSDRD_REF_CLK>,
+				 <&cmu_fsys CLK_GOUT_FSYS_USB20DRD_HCLK_USB20_CTRL>;
+
+			status = "disabled";
+
+			usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+
+				phy-names = "usb2-phy";
+				phys = <&usbdrd_phy 0>;
+
+				usb-role-switch;
+				snps,usb2-gadget-lpm-disable;
+			};
+		};
+
+		cmu_fsys: clock-controller@13730000 {
+			compatible = "samsung,exynos7870-cmu-fsys";
+			reg = <0x13730000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "usb20drd";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_FSYS_USB20DRD_REFCLK>;
+		};
+
+		pinctrl_fsys: pinctrl@13750000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x13750000 0x1000>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial0: serial@13800000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART0_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART0_EXT_UCLK>;
+
+			samsung,uart-fifosize = <16>;
+
+			status = "disabled";
+		};
+
+		serial1: serial@13810000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART1_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART1_EXT_UCLK>;
+
+			samsung,uart-fifosize = <256>;
+
+			status = "disabled";
+		};
+
+		serial2: serial@13820000 {
+			compatible = "samsung,exynos7870-uart",
+				     "samsung,exynos8895-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+
+			clock-names = "uart", "clk_uart_baud0";
+			clocks = <&cmu_peri CLK_GOUT_PERI_UART2_PCLK>,
+				 <&cmu_peri CLK_GOUT_PERI_UART2_EXT_UCLK>;
+
+			samsung,uart-fifosize = <256>;
+
+			status = "disabled";
+		};
+
+		i2c0: i2c@13830000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C0_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@13840000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13840000 0x100>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C1_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c2: i2c@13850000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13850000 0x100>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C2_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c3: i2c@13860000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C3_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c4: i2c@13870000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C4_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c5: i2c@13880000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C5_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c6: i2c@13890000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C6_PCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c1: i2c@138a0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138a0000 0x1000>;
+			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c1_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C1_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c2: i2c@138b0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138b0000 0x1000>;
+			interrupts = <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c2_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C2_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c3: i2c@138c0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138c0000 0x1000>;
+			interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c3_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C3_IPCLK>;
+
+			status = "disabled";
+		};
+
+		i2c7: i2c@138d0000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x138d0000 0x100>;
+			interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C7_PCLK>;
+
+			status = "disabled";
+		};
+
+		i2c8: i2c@138e0000 {
+			compatible = "samsung,exynos7870-i2c",
+				     "samsung,s3c2440-i2c";
+			reg = <0x138e0000 0x100>;
+			interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_bus>;
+
+			clock-names = "i2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_I2C8_PCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c4: i2c@138f0000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x138f0000 0x1000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c4_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C4_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c5: i2c@13950000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x13950000 0x1000>;
+			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c5_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C5_IPCLK>;
+
+			status = "disabled";
+		};
+
+		hsi2c6: i2c@13960000 {
+			compatible = "samsung,exynos7870-hsi2c",
+				     "samsung,exynos7-hsi2c";
+			reg = <0x13960000 0x1000>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&hsi2c6_bus>;
+
+			clock-names = "hsi2c";
+			clocks = <&cmu_peri CLK_GOUT_PERI_HSI2C6_IPCLK>;
+
+			status = "disabled";
+		};
+
+		pinctrl_top: pinctrl@139b0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139b0000 0x1000>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_nfc: pinctrl@139c0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139c0000 0x1000>;
+			interrupts = <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_touch: pinctrl@139d0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139d0000 0x1000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ese: pinctrl@139e0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139e0000 0x1000>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@139f0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x139f0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7870-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		cmu_isp: clock-controller@144d0000 {
+			compatible = "samsung,exynos7870-cmu-isp";
+			reg = <0x144d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "cam", "isp", "vra";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_CAM>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_ISP>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_ISP_VRA>;
+		};
+
+		syscon_cam0: system-controller@144f1040 {
+			compatible = "samsung,exynos7870-cam0-sysreg", "syscon";
+			reg = <0x144f1040 0x04>;
+		};
+
+		dsi: dsi@14800000 {
+			compatible = "samsung,exynos7870-mipi-dsi";
+			reg = <0x14800000 0x100>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&cmu_dispaud CLK_GOUT_DISPAUD_BUS_DISP>,
+				 <&cmu_dispaud CLK_GOUT_DISPAUD_APB_DISP>,
+				 <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_MIPIPHY_TXBYTECLKHS_USER>,
+				 <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_MIPIPHY_RXCLKESC0_USER>;
+			clock-names = "bus", "pll", "byte", "esc";
+
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					dsi_to_decon: endpoint {
+						remote-endpoint = <&decon_to_dsi>;
+					};
+				};
+			};
+		};
+
+		decon: display-controller@14830000 {
+			compatible = "samsung,exynos7870-decon";
+			reg = <0x14830000 0x8000>;
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+
+			clocks = <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_PLL>,
+				 <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_BUS_USER>,
+				 <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_DECON_ECLK>,
+				 <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_DECON_VCLK>;
+			clock-names = "pclk_decon0", "aclk_decon0",
+				      "decon0_eclk", "decon0_vclk";
+
+			iommus = <&sysmmu_decon>;
+
+			status = "disabled";
+
+			port {
+				decon_to_dsi: endpoint {
+					remote-endpoint = <&dsi_to_decon>;
+				};
+			};
+		};
+
+		sysmmu_decon: iommu@14860000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14860000 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <0>;
+
+			clocks = <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_BUS_USER>;
+			clock-names = "sysmmu";
+		};
+
+		pinctrl_dispaud: pinctrl@148c0000 {
+			compatible = "samsung,exynos7870-pinctrl";
+			reg = <0x148c0000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_dispaud: clock-controller@148d0000 {
+			compatible = "samsung,exynos7870-cmu-dispaud";
+			reg = <0x148d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "bus", "decon_eclk", "decon_vclk";
+			clocks = <&oscclk>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_BUS>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_ECLK>,
+				 <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_VCLK>;
+		};
+
+		syscon_disp: system-controller@148f100c {
+			compatible = "samsung,exynos7870-disp-sysreg", "syscon";
+			reg = <0x148f100c 0x04>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos7870-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
index f074df8982b3..ab076d326a49 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -21,6 +21,7 @@
 	compatible = "winlink,e850-96", "samsung,exynos850";
 
 	aliases {
+		ethernet0 = &ethernet;
 		mmc0 = &mmc_0;
 		serial0 = &serial_0;
 	};
@@ -45,17 +46,9 @@
 		};
 	};
 
-	/*
-	 * RAM: 4 GiB (eMCP):
-	 *   - 2 GiB at 0x80000000
-	 *   - 2 GiB at 0x880000000
-	 *
-	 * 0xbab00000..0xbfffffff: secure memory (85 MiB).
-	 */
 	memory@80000000 {
 		device_type = "memory";
-		reg = <0x0 0x80000000 0x3ab00000>,
-		      <0x0 0xc0000000 0x40000000>,
+		reg = <0x0 0x80000000 0x80000000>,
 		      <0x8 0x80000000 0x80000000>;
 	};
 
@@ -146,6 +139,11 @@
 		#size-cells = <1>;
 		ranges;
 
+		secure_mem: memory@bab00000 {
+			reg = <0x0 0xbab00000 0x5500000>;
+			no-map;
+		};
+
 		ramoops@f0000000 {
 			compatible = "ramoops";
 			reg = <0x0 0xf0000000 0x200000>;
@@ -244,10 +242,24 @@
 };
 
 &usbdrd_dwc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	dr_mode = "otg";
 	usb-role-switch;
 	role-switch-default-mode = "host";
 
+	hub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+
 	port {
 		usb1_drd_sw: endpoint {
 			remote-endpoint = <&usb_dr_connector>;
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index f1c8b4613cbc..cb55015c8dce 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -651,7 +651,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138200c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -677,7 +677,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138a00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1020>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -706,7 +706,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138b00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1030>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -735,7 +735,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138c00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1040>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -764,7 +764,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x139400c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1050>;
-			samsung,mode = <USI_V2_SPI>;
+			samsung,mode = <USI_MODE_SPI>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -796,7 +796,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x11d000c0 0x20>;
 			samsung,sysreg = <&sysreg_cmgp 0x2000>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -855,7 +855,7 @@
 			compatible = "samsung,exynos850-usi";
 			reg = <0x11d200c0 0x20>;
 			samsung,sysreg = <&sysreg_cmgp 0x2010>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts b/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
index 3a376ab2bb9e..61e064af3337 100644
--- a/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
+++ b/arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts
@@ -10,12 +10,17 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
 
 / {
 	model = "Samsung Galaxy S8 (SM-G950F)";
 	compatible = "samsung,dreamlte", "samsung,exynos8895";
 	chassis-type = "handset";
 
+	aliases {
+		mmc0 = &mmc;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <1>;
@@ -89,12 +94,60 @@
 			wakeup-source;
 		};
 	};
+
+	/* TODO: Remove once PMIC is implemented  */
+	reg_placeholder: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg-placeholder";
+	};
+};
+
+&hsi2c_23 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+
+		/* TODO: Update once PMIC is implemented */
+		avdd-supply = <&reg_placeholder>;
+		vdd-supply = <&reg_placeholder>;
+
+		interrupt-parent = <&gpa1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts_int>;
+		pinctrl-names = "default";
+	};
 };
 
 &oscclk {
 	clock-frequency = <26000000>;
 };
 
+&mmc {
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &sd2_cd>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpa1 5 GPIO_ACTIVE_LOW>;
+	clock-frequency = <800000000>;
+	disable-wp;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+
+	/* TODO: Add regulators once PMIC is implemented */
+
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	samsung,dw-mshc-sdr-timing = <0 3>;
+
+	status = "okay";
+};
+
 &pinctrl_alive {
 	key_power: key-power-pins {
 		samsung,pins = "gpa2-4";
@@ -123,4 +176,23 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
 	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	ts_int: ts-int-pins {
+		samsung,pins = "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&usi9 {
+	samsung,mode = <USI_MODE_I2C0_1>;
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
index 51e9c9c4b166..16903ce63a32 100644
--- a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
@@ -202,7 +202,7 @@
 	};
 
 	bt_en: bt-en-pins {
-		samsung,pins ="gpj1-7";
+		samsung,pins = "gpj1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
index 9f9ac5359879..f92d2a8a20a2 100644
--- a/arch/arm64/boot/dts/exynos/exynos8895.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
@@ -26,20 +26,6 @@
 		pinctrl7 = &pinctrl_peric1;
 	};
 
-	arm-a53-pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>,
-				     <&cpu2>,
-				     <&cpu3>;
-	};
-
-	/* There's no PMU model for the Mongoose cores */
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -139,6 +125,30 @@
 		clock-output-names = "oscclk";
 	};
 
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	pmu-mongoose-m2 {
+		compatible = "samsung,mongoose-pmu";
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
 	psci {
 		compatible = "arm,psci";
 		method = "smc";
@@ -218,6 +228,273 @@
 				      "usi1", "usi2", "usi3";
 		};
 
+		syscon_peric0: syscon@10420000 {
+			compatible = "samsung,exynos8895-peric0-sysreg", "syscon";
+			reg = <0x10420000 0x2000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK>;
+		};
+
+		serial_0: serial@10430000 {
+			compatible = "samsung,exynos8895-uart";
+			reg = <0x10430000 0x100>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_UART_DBG_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_UART_DBG_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		usi0: usi@10440000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10440000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			status = "disabled";
+
+			hsi2c_5: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_2: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart2_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi2_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_6: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI00_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi1: usi@10460000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10460000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x1004>;
+			status = "disabled";
+
+			hsi2c_7: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_3: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart3_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi3_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_8: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI01_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@10480000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10480000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x1008>;
+			status = "disabled";
+
+			hsi2c_9: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_4: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart4_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi4_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_10: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI02_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@104a0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x104a0000 0x11000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric0 0x100c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_5: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart5_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi5_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_12: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_USI03_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		pinctrl_peric0: pinctrl@104d0000 {
 			compatible = "samsung,exynos8895-pinctrl";
 			reg = <0x104d0000 0x1000>;
@@ -250,12 +527,695 @@
 				      "usi10", "usi11", "usi12", "usi13";
 		};
 
+		syscon_peric1: syscon@10820000 {
+			compatible = "samsung,exynos8895-peric1-sysreg", "syscon";
+			reg = <0x10820000 0x2000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK>;
+		};
+
+		serial_1: serial@10830000 {
+			compatible = "samsung,exynos8895-uart";
+			reg = <0x10830000 0x100>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_UART_BT_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_UART_BT_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		usi4: usi@10840000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10840000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1008>;
+			status = "disabled";
+
+			hsi2c_13: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_6: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart6_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_6: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi6_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_14: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI04_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@10860000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10860000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x100c>;
+			status = "disabled";
+
+			hsi2c_15: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c15_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_7: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart7_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi7_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_16: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI05_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c16_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@10880000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10880000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1010>;
+			status = "disabled";
+
+			hsi2c_17: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c17_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_8: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart8_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi8_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_18: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI06_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c18_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi7: usi@108a0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x108a0000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1014>;
+			status = "disabled";
+
+			hsi2c_19: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c19_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_9: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart9_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_9: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi9_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_20: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI07_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c20_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi8: usi@108c0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x108c0000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1018>;
+			status = "disabled";
+
+			hsi2c_21: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c21_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_10: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart10_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi10_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_22: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI08_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c22_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@108e0000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x108e0000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x101c>;
+			status = "disabled";
+
+			hsi2c_23: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c23_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_11: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart11_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi11_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_24: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI09_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c24_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@10900000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10900000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1020>;
+			status = "disabled";
+
+			hsi2c_25: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c25_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_12: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart12_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_12: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi12_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_26: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI10_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c26_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@10920000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10920000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1024>;
+			status = "disabled";
+
+			hsi2c_27: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c27_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_13: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart13_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_13: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi13_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_28: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI11_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c28_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi12: usi@10940000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10940000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x1028>;
+			status = "disabled";
+
+			hsi2c_29: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c29_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_14: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart14_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_14: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi14_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_30: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI12_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c30_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi13: usi@10960000 {
+			compatible = "samsung,exynos8895-usi";
+			ranges = <0x0 0x10960000 0x11000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_SCLK_USI>;
+			clock-names = "pclk", "ipclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			samsung,sysreg = <&syscon_peric1 0x102c>;
+			status = "disabled";
+
+			hsi2c_31: i2c@0 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x0 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c31_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_15: serial@0 {
+				compatible = "samsung,exynos8895-uart";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_SCLK_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&uart15_bus>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_15: spi@0 {
+				compatible = "samsung,exynos8895-spi",
+					     "samsung,exynos850-spi";
+				reg = <0 0x100>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_SCLK_USI>;
+				clock-names = "spi", "spi_busclk0";
+				interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi15_bus>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_32: i2c@10000 {
+				compatible = "samsung,exynos8895-hsi2c";
+				reg = <0x10000 0x1000>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_USI13_I_PCLK>;
+				clock-names = "hsi2c";
+				interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&hsi2c32_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		pinctrl_peric1: pinctrl@10980000 {
 			compatible = "samsung,exynos8895-pinctrl";
 			reg = <0x10980000 0x1000>;
 			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		hsi2c_1: i2c@10990000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x10990000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM0_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c1_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@109a0000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x109a0000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM1_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c2_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@109b0000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x109b0000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM2_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c3_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		hsi2c_4: i2c@109c0000 {
+			compatible = "samsung,exynos8895-hsi2c";
+			reg = <0x109c0000 0x1000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_HSI2C_CAM3_IPCLK>;
+			clock-names = "hsi2c";
+			interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&hsi2c4_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
 		spi_0: spi@109d0000 {
 			compatible = "samsung,exynos8895-spi",
 				     "samsung,exynos850-spi";
@@ -300,6 +1260,12 @@
 				      "ufs", "usbdrd30";
 		};
 
+		syscon_fsys0: syscon@11020000 {
+			compatible = "samsung,exynos8895-fsys0-sysreg", "syscon";
+			reg = <0x11020000 0x2000>;
+			clocks = <&cmu_fsys0 CLK_GOUT_FSYS0_SYSREG_FSYS0_PCLK>;
+		};
+
 		pinctrl_fsys0: pinctrl@11050000 {
 			compatible = "samsung,exynos8895-pinctrl";
 			reg = <0x11050000 0x1000>;
@@ -318,12 +1284,34 @@
 			clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";
 		};
 
+		syscon_fsys1: syscon@11420000 {
+			compatible = "samsung,exynos8895-fsys1-sysreg", "syscon";
+			reg = <0x11420000 0x2000>;
+			clocks = <&cmu_fsys1 CLK_GOUT_FSYS1_SYSREG_FSYS1_PCLK>;
+		};
+
 		pinctrl_fsys1: pinctrl@11430000 {
 			compatible = "samsung,exynos8895-pinctrl";
 			reg = <0x11430000 0x1000>;
 			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		mmc: mmc@11500000 {
+			compatible = "samsung,exynos8895-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
+			reg = <0x11500000 0x2000>;
+			assigned-clocks = <&cmu_top CLK_MOUT_CMU_FSYS1_MMC_CARD>;
+			assigned-clock-parents = <&cmu_top CLK_FOUT_SHARED4_PLL>;
+			clocks = <&cmu_fsys1 CLK_GOUT_FSYS1_MMC_CARD_I_ACLK>,
+				 <&cmu_fsys1 CLK_GOUT_FSYS1_MMC_CARD_SDCLKIN>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pinctrl_abox: pinctrl@13e60000 {
 			compatible = "samsung,exynos8895-pinctrl";
 			reg = <0x13e60000 0x1000>;
diff --git a/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
new file mode 100644
index 000000000000..88091bf09e4e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 9810 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_chub {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm10: gpm10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm11: gpm11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm12: gpm12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm13: gpm13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm14: gpm14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm15: gpm15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm16: gpm16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm17: gpm17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm40: gpm40-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm41: gpm41-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm42: gpm42-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm43: gpm43-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_vts {
+	gpt0: gpt0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts b/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts
new file mode 100644
index 000000000000..fc0ddfee4cd6
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S9 (starlte/SM-G960F) device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+/dts-v1/;
+#include "exynos9810.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung Galaxy S9 (SM-G960F)";
+	compatible = "samsung,starlte", "samsung,exynos9810";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@cc000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+			width = <1440>;
+			height = <2960>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup &key_wink>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		/* In stock firmware used for assistant. Map it as a camera button for now */
+		wink-key {
+			label = "Camera";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&gpa0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3c800000>,
+		      <0x0 0xc0000000 0x20000000>,
+		      <0x0 0xe1900000 0x1e700000>,
+		      <0x8 0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@cc000000 {
+			reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+			no-map;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_wink: key-wink-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos9810.dtsi b/arch/arm64/boot/dts/exynos/exynos9810.dtsi
new file mode 100644
index 000000000000..01eba31f7ca3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810.dtsi
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Exynos 9810 SoC device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos9810";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_chub;
+		pinctrl3 = &pinctrl_cmgp;
+		pinctrl4 = &pinctrl_fsys0;
+		pinctrl5 = &pinctrl_fsys1;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+		pinctrl8 = &pinctrl_vts;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: osc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	pmu-mongoose-m3 {
+		compatible = "samsung,mongoose-pmu";
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+		cpu_suspend = <0xc4000001>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos9810-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		gic: interrupt-controller@10101000 {
+			compatible = "arm,gic-400";
+			reg = <0x10101000 0x1000>,
+			      <0x10102000 0x1000>,
+			      <0x10104000 0x2000>,
+			      <0x10106000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			#address-cells = <0>;
+			#size-cells = <1>;
+		};
+
+		pinctrl_peric0: pinctrl@10430000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x10430000 0x1000>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric1: pinctrl@10830000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x10830000 0x1000>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys0: pinctrl@11050000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x11050000 0x1000>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys1: pinctrl@11430000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x11430000 0x1000>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_vts: pinctrl@13880000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x13880000 0x1000>;
+		};
+
+		pinctrl_chub: pinctrl@13a80000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x13a80000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@14050000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x14050000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos9810-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@14060000 {
+			compatible = "samsung,exynos9810-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x14060000 0x10000>;
+		};
+
+		pinctrl_cmgp: pinctrl@14220000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x14220000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos9810-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_aud: pinctrl@17c60000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x17c60000 0x1000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos9810-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos990-c1s.dts b/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
index 36a6f1377e92..9f0ad4f9673a 100644
--- a/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
+++ b/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
@@ -44,6 +44,12 @@
 		      <0x8 0x80000000 0x1 0x7ec00000>;
 	};
 
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -113,3 +119,13 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-r8s.dts b/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
new file mode 100644
index 000000000000..55342db61979
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 FE (r8s/SM-G780F) device tree source
+ *
+ * Copyright (c) 2024, Denzeel Oliva <wachiturroxd150@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy S20 FE";
+	compatible = "samsung,r8s", "samsung,exynos990";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@f1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xf1000000 0 (1080 * 2400 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole - last block */
+		      <0x8 0x80000000 0x0 0xc0000000>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f1000000 {
+			reg = <0 0xf1000000 0 0x13c6800>;
+			no-map;
+		};
+
+		abox_reserved: audio@f7fb0000 {
+			reg = <0 0xf7fb0000 0 0x2a50000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
new file mode 100644
index 000000000000..7b97220cccb7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 Series device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@f1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xf1000000 0 (1440 * 3200 * 4)>;
+			width = <1440>;
+			height = <3200>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: framebuffer@f1000000 {
+			reg = <0 0xf1000000 0 0x1194000>;
+			no-map;
+		};
+
+		abox_reserved: audio@f7fb0000 {
+			reg = <0 0xf7fb0000 0 0x2a50000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s.dts b/arch/arm64/boot/dts/exynos/exynos990-x1s.dts
new file mode 100644
index 000000000000..1ae881015e0c
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 5G (x1s/SM-G981B) device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990-x1s-common.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Samsung Galaxy S20 5G";
+	compatible = "samsung,x1s", "samsung,exynos990";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole */
+		      <0x8 0x80000000 0x2 0x7e800000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts
new file mode 100644
index 000000000000..d3720996ba93
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1slte.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S20 (x1slte/SM-G980F) device tree source
+ *
+ * Copyright (c) 2024, Umer Uddin <umer.uddin@mentallysanemainliners.org>
+ */
+
+/dts-v1/;
+#include "exynos990-x1s-common.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Samsung Galaxy S20";
+	compatible = "samsung,x1slte", "samsung,exynos990";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x3ab00000>,
+		      /* Memory hole */
+		      <0x0 0xc1200000 0x0 0x1ee00000>,
+		      /* Memory hole */
+		      <0x0 0xe1900000 0x0 0x1e700000>,
+		      /* Memory hole */
+		      <0x8 0x80000000 0x1 0x7ec00000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi
index c1986f00e443..f8e2a31b4b75 100644
--- a/arch/arm64/boot/dts/exynos/exynos990.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi
@@ -5,6 +5,7 @@
  * Copyright (c) 2024, Igor Belwon <igor.belwon@mentallysanemainliners.org>
  */
 
+#include <dt-bindings/clock/samsung,exynos990.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -24,30 +25,6 @@
 		pinctrl6 = &pinctrl_vts;
 	};
 
-	arm-a55-pmu {
-		compatible = "arm,cortex-a55-pmu";
-		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>,
-				     <&cpu2>,
-				     <&cpu3>;
-	};
-
-	arm-a76-pmu {
-		compatible = "arm,cortex-a76-pmu";
-		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-
-		interrupt-affinity = <&cpu4>,
-				     <&cpu5>;
-	};
-
-	/* There's no PMU model for cluster2, which are the Mongoose cores. */
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -155,6 +132,37 @@
 		clock-output-names = "oscclk";
 	};
 
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>;
+	};
+
+	pmu-mongoose-m5 {
+		compatible = "samsung,mongoose-pmu";
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-affinity = <&cpu6>,
+				     <&cpu7>;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "hvc";
@@ -173,6 +181,60 @@
 			reg = <0x10000000 0x100>;
 		};
 
+		cmu_peris: clock-controller@10020000 {
+			compatible = "samsung,exynos990-cmu-peris";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIS_BUS>;
+			clock-names = "oscclk", "bus";
+		};
+
+		timer@10040000 {
+			compatible = "samsung,exynos990-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			clocks = <&oscclk>, <&cmu_peris CLK_GOUT_PERIS_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog_cl0: watchdog@10050000 {
+			compatible = "samsung,exynos990-wdt";
+			reg = <0x10050000 0x100>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_PERIS_WDT_CLUSTER0_PCLK>,
+				 <&oscclk>;
+			clock-names = "watchdog",
+				      "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+		};
+
+		watchdog_cl2: watchdog@10060000 {
+			compatible = "samsung,exynos990-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_PERIS_WDT_CLUSTER2_PCLK>,
+				 <&oscclk>;
+			clock-names = "watchdog",
+				      "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <2>;
+		};
+
 		gic: interrupt-controller@10101000 {
 			compatible = "arm,gic-400";
 			reg = <0x10101000 0x1000>,
@@ -187,18 +249,100 @@
 			#size-cells = <1>;
 		};
 
+		cmu_peric0: clock-controller@10400000 {
+			compatible = "samsung,exynos990-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
+		sysreg_peric0: syscon@10420000 {
+			compatible = "samsung,exynos990-peric0-sysreg", "syscon";
+			reg = <0x10420000 0x10000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PCLK>;
+		};
+
 		pinctrl_peric0: pinctrl@10430000 {
 			compatible = "samsung,exynos990-pinctrl";
 			reg = <0x10430000 0x1000>;
 			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		cmu_peric1: clock-controller@10700000 {
+			compatible = "samsung,exynos990-cmu-peric1";
+			reg = <0x10700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
+		sysreg_peric1: syscon@10720000 {
+			compatible = "samsung,exynos990-peric1-sysreg", "syscon";
+			reg = <0x10720000 0x10000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PCLK>;
+		};
+
 		pinctrl_peric1: pinctrl@10730000 {
 			compatible = "samsung,exynos990-pinctrl";
 			reg = <0x10730000 0x1000>;
 			interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		cmu_hsi0: clock-controller@10a00000 {
+			compatible = "samsung,exynos990-cmu-hsi0";
+			reg = <0x10a00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USBDP_DEBUG>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>;
+			clock-names = "oscclk",
+				      "bus",
+				      "usb31drd",
+				      "usbdp_debug",
+				      "dpgtc";
+		};
+
+		usbdrd_phy: phy@10c00000 {
+			compatible = "samsung,exynos990-usbdrd-phy";
+			reg = <0x10c00000 0x100>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+				 <&oscclk>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usbdrd: usb@10e00000 {
+			compatible = "samsung,exynos990-dwusb3",
+				     "samsung,exynos850-dwusb3";
+			ranges = <0x0 0x10e00000 0x10000>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_USB31DRD_REF_CLK_40>;
+			clock-names = "bus_early", "ref";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			usbdrd_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>;
+				phy-names = "usb2-phy";
+			};
+		};
+
 		pinctrl_hsi1: pinctrl@13040000 {
 			compatible = "samsung,exynos990-pinctrl";
 			reg = <0x13040000 0x1000>;
@@ -227,10 +371,33 @@
 			};
 		};
 
+		pmu_system_controller: system-controller@15860000 {
+			compatible = "samsung,exynos990-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x15860000 0x10000>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3a00>; /* SWRESET */
+				mask = <0x2>; /* SWRESET_TRIGGER */
+				value = <0x2>;
+			};
+		};
+
 		pinctrl_cmgp: pinctrl@15c30000 {
 			compatible = "samsung,exynos990-pinctrl";
 			reg = <0x15c30000 0x1000>;
 		};
+
+		cmu_top: clock-controller@1a330000 {
+			compatible = "samsung,exynos990-cmu-top";
+			reg = <0x1a330000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index b36292a7db64..66628cb32776 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -442,7 +442,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103000c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -505,7 +505,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103100c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1004>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -534,7 +534,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103200c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1008>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -597,7 +597,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103300c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x100c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -626,7 +626,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103400c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -689,7 +689,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103500c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1014>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -718,7 +718,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103600c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1018>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -781,7 +781,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103700c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x101c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -810,7 +810,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103800c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -873,7 +873,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103900c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1024>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -902,7 +902,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103a00c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1028>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -965,7 +965,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x103b00c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x102c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -994,7 +994,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109000c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1057,7 +1057,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109100c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1004>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1086,7 +1086,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109200c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1008>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1149,7 +1149,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109300c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x100c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1178,7 +1178,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109400c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1241,7 +1241,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109500c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1014>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1270,7 +1270,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109600c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1018>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1333,7 +1333,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109700c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x101c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1362,7 +1362,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109800c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1425,7 +1425,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109900c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1024>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1454,7 +1454,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109a00c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1028>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1515,7 +1515,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x109b00c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x102c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
index c759134c909e..6ee74d260776 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -89,6 +89,13 @@
 			compatible = "arm,cortex-a78ae";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
 		};
 
 		cpu1: cpu@100 {
@@ -96,6 +103,13 @@
 			compatible = "arm,cortex-a78ae";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
 		};
 
 		cpu2: cpu@200 {
@@ -103,6 +117,13 @@
 			compatible = "arm,cortex-a78ae";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
 		};
 
 		cpu3: cpu@300 {
@@ -110,6 +131,13 @@
 			compatible = "arm,cortex-a78ae";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl0>;
 		};
 
 		cpu4: cpu@10000 {
@@ -117,6 +145,13 @@
 			compatible = "arm,cortex-a78ae";
 			reg = <0x0 0x10000>;
 			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
 		};
 
 		cpu5: cpu@10100 {
@@ -124,6 +159,13 @@
 			compatible = "arm,cortex-a78ae";
 			reg = <0x0 0x10100>;
 			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
 		};
 
 		cpu6: cpu@10200 {
@@ -131,6 +173,13 @@
 			compatible = "arm,cortex-a78ae";
 			reg = <0x0 0x10200>;
 			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
 		};
 
 		cpu7: cpu@10300 {
@@ -138,6 +187,13 @@
 			compatible = "arm,cortex-a78ae";
 			reg = <0x0 0x10300>;
 			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl1>;
 		};
 
 		cpu8: cpu@20000 {
@@ -145,6 +201,13 @@
 			compatible = "arm,cortex-a78ae";
 			reg = <0x0 0x20000>;
 			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl2>;
 		};
 
 		cpu9: cpu@20100 {
@@ -152,6 +215,70 @@
 			compatible = "arm,cortex-a78ae";
 			reg = <0x0 0x20100>;
 			enable-method = "psci";
+			i-cache-size = <0x10000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_cl2>;
+		};
+
+		l2_cache_cl0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_cache_cl0>;
+		};
+
+		l2_cache_cl1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_cache_cl1>;
+		};
+
+		l2_cache_cl2: l2-cache2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_cache_cl2>;
+		};
+
+		l3_cache_cl0: l3-cache0 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+			cache-size = <0x200000>;/* 2MB L3 cache for cpu cluster-0 */
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		l3_cache_cl1: l3-cache1 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+			cache-size = <0x200000>;/* 2MB L3 cache for cpu cluster-1 */
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		l3_cache_cl2: l3-cache2 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+			cache-size = <0x100000>;/* 1MB L3 cache for cpu cluster-2 */
+			cache-line-size = <64>;
+			cache-sets = <1365>;
 		};
 	};
 
@@ -183,6 +310,26 @@
 				      "noc";
 		};
 
+		watchdog_cl0: watchdog@10060000 {
+			compatible = "samsung,exynosautov920-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xtcxo>, <&xtcxo>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+		};
+
+		watchdog_cl1: watchdog@10070000 {
+			compatible = "samsung,exynosautov920-wdt";
+			reg = <0x10070000 0x100>;
+			interrupts = <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xtcxo>, <&xtcxo>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+		};
+
 		gic: interrupt-controller@10400000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -193,6 +340,69 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		spdma0: dma-controller@10180000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10180000 0x1000>;
+			interrupts = <GIC_SPI 918 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		spdma1: dma-controller@10190000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10190000 0x1000>;
+			interrupts = <GIC_SPI 917 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma0: dma-controller@101a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101a0000 0x1000>;
+			interrupts = <GIC_SPI 916 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma1: dma-controller@101b0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101b0000 0x1000>;
+			interrupts = <GIC_SPI 915 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma2: dma-controller@101c0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101c0000 0x1000>;
+			interrupts = <GIC_SPI 914 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma3: dma-controller@101d0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101d0000 0x1000>;
+			interrupts = <GIC_SPI 913 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma4: dma-controller@101e0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x101e0000 0x1000>;
+			interrupts = <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
 		cmu_peric0: clock-controller@10800000 {
 			compatible = "samsung,exynosautov920-cmu-peric0";
 			reg = <0x10800000 0x8000>;
@@ -223,7 +433,7 @@
 				     "samsung,exynos850-usi";
 			reg = <0x108800c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -245,6 +455,419 @@
 				samsung,uart-fifosize = <256>;
 				status = "disabled";
 			};
+
+			spi_0: spi@10880000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10880000 0x30>;
+				interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_bus &spi0_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 1>, <&pdma0 0>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_1: usi@108a00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108a00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_1: serial@108a0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108a0000 0xc0>;
+				interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_1: spi@108a0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x108a0000 0x30>;
+				interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_bus &spi1_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 3>, <&pdma0 2>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_2: usi@108c00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108c00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_2: serial@108c0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108c0000 0xc0>;
+				interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart2_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@108c0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x108c0000 0x30>;
+				interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_bus &spi2_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 5>, <&pdma0 4>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_3: usi@108e00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108e00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_3: serial@108e0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x108e0000 0xc0>;
+				interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart3_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@108e0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x108e0000 0x30>;
+				interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi3_bus &spi3_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 7>, <&pdma0 6>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_4: usi@109000c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_4: serial@10900000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10900000 0xc0>;
+				interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart4_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@10900000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10900000 0x30>;
+				interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi4_bus &spi4_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 9>, <&pdma0 8>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_5: usi@109200c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_5: serial@10920000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10920000 0xc0>;
+				interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart5_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@10920000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10920000 0x30>;
+				interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi5_bus &spi5_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 11>, <&pdma0 10>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_6: usi@109400c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1030>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_6: serial@10940000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10940000 0xc0>;
+				interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart6_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_6: spi@10940000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10940000 0x30>;
+				interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi6_bus &spi6_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 13>, <&pdma0 12>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_7: usi@109600c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1038>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_7: serial@10960000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10960000 0xc0>;
+				interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart7_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@10960000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10960000 0x30>;
+				interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi7_bus &spi7_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 15>, <&pdma0 14>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_8: usi@109800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1040>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_8: serial@10980000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10980000 0xc0>;
+				interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart8_bus>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@10980000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10980000 0x30>;
+				interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi8_bus &spi8_cs_func>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 17>, <&pdma0 16>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+
 		};
 
 		pwm: pwm@109b0000 {
@@ -283,6 +906,447 @@
 			interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		usi_9: usi@10c800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10c800c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_9: serial@10c8000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10c80000 0xc0>;
+				interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart9_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_9: spi@10c80000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10c80000 0x30>;
+				interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi9_bus &spi9_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 1>, <&pdma1 0>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi_10: usi@10ca00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10ca00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_10: serial@10ca0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10ca0000 0xc0>;
+				interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart10_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@10ca0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10ca0000 0x30>;
+				interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi10_bus &spi10_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 3>, <&pdma1 2>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_11: usi@10cc00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10cc00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_11: serial@10cc0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10cc0000 0xc0>;
+				interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart11_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@10cc0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10cc0000 0x30>;
+				interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi11_bus &spi11_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 5>, <&pdma1 4>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_12: usi@10ce00c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10ce00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_12: serial@10ce0000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10ce0000 0xc0>;
+				interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart12_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_12: spi@10ce0000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10ce0000 0x30>;
+				interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi12_bus &spi12_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 7>, <&pdma1 6>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_13: usi@10d000c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d000c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_13: serial@10d00000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d00000 0xc0>;
+				interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart13_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_13: spi@10d00000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d00000 0x30>;
+				interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi13_bus &spi13_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 9>, <&pdma1 8>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_14: usi@10d200c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d200c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_14: serial@10d20000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d20000 0xc0>;
+				interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart14_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_14: spi@10d20000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d20000 0x30>;
+				interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi14_bus &spi14_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 11>, <&pdma1 10>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_15: usi@10d400c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d400c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1030>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_15: serial@10d40000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d40000 0xc0>;
+				interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart15_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_15: spi@10d40000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d40000 0x30>;
+				interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi15_bus &spi15_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 13>, <&pdma1 12>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_16: usi@10d600c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d600c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1038>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_16: serial@10d60000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d60000 0xc0>;
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart16_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_16: spi@10d60000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d60000 0x30>;
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi16_bus &spi16_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 15>, <&pdma1 14>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_17: usi@10d800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d800c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1040>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_17: serial@10d80000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10d80000 0xc0>;
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart17_bus>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_17: spi@10d80000 {
+				compatible = "samsung,exynosautov920-spi",
+					     "samsung,exynos850-spi";
+				reg = <0x10d80000 0x30>;
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi17_bus &spi17_cs_func>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+				clock-names = "spi", "spi_busclk0";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma1 17>, <&pdma1 16>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fifo-depth = <64>;
+				status = "disabled";
+			};
+		};
+
 		cmu_top: clock-controller@11000000 {
 			compatible = "samsung,exynosautov920-cmu-top";
 			reg = <0x11000000 0x8000>;
@@ -345,6 +1409,23 @@
 			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		cmu_hsi2: clock-controller@16b00000 {
+			compatible = "samsung,exynosautov920-cmu-hsi2";
+			reg = <0x16b00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_NOC>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_NOC_UFS>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_UFS_EMBD>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_ETHERNET>;
+			clock-names = "oscclk",
+				      "noc",
+				      "ufs",
+				      "embd",
+				      "ethernet";
+		};
+
 		pinctrl_hsi2: pinctrl@16c10000 {
 			compatible = "samsung,exynosautov920-pinctrl";
 			reg = <0x16c10000 0x10000>;
@@ -357,10 +1438,88 @@
 			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		ufs_0_phy: phy@16e04000 {
+			compatible = "samsung,exynosautov920-ufs-phy";
+			reg = <0x16e04000 0x4000>;
+			reg-names = "phy-pma";
+			clocks = <&xtcxo>;
+			clock-names = "ref_clk";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		cmu_mfc: clock-controller@19c00000 {
+			compatible = "samsung,exynosautov920-cmu-mfc";
+			reg = <0x19c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_MFC_MFC>,
+				 <&cmu_top DOUT_CLKCMU_MFC_WFD>;
+			clock-names = "oscclk",
+				      "mfc",
+				      "wfd";
+		};
+
 		pinctrl_aud: pinctrl@1a460000 {
 			compatible = "samsung,exynosautov920-pinctrl";
 			reg = <0x1a460000 0x10000>;
 		};
+
+		cmu_m2m: clock-controller@1a800000 {
+			compatible = "samsung,exynosautov920-cmu-m2m";
+			reg = <0x1a800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_M2M_NOC>,
+				 <&cmu_top DOUT_CLKCMU_M2M_JPEG>;
+			clock-names = "oscclk",
+				      "noc",
+				      "jpeg";
+		};
+
+		cmu_cpucl0: clock-controller@1ec00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl0";
+			reg = <0x1ec00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_CLUSTER>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL0_DBG>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster",
+				      "dbg";
+		};
+
+		cmu_cpucl1: clock-controller@1ed00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl1";
+			reg = <0x1ed00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL1_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL1_CLUSTER>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster";
+		};
+
+		cmu_cpucl2: clock-controller@1ee00000 {
+			compatible = "samsung,exynosautov920-cmu-cpucl2";
+			reg = <0x1ee00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL2_SWITCH>,
+				 <&cmu_top DOUT_CLKCMU_CPUCL2_CLUSTER>;
+			clock-names = "oscclk",
+				      "switch",
+				      "cluster";
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile
index 0a6d5e1fe4ee..7385f82b03c9 100644
--- a/arch/arm64/boot/dts/exynos/google/Makefile
+++ b/arch/arm64/boot/dts/exynos/google/Makefile
@@ -2,3 +2,4 @@
 
 dtb-$(CONFIG_ARCH_EXYNOS) += \
 	gs101-oriole.dtb \
+	gs101-raven.dtb
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
index 387fb779bd29..8df42bedbc03 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -8,169 +8,22 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "gs101-pinctrl.h"
-#include "gs101.dtsi"
+#include "gs101-pixel-common.dtsi"
 
 / {
 	model = "Oriole";
 	compatible = "google,gs101-oriole", "google,gs101";
-
-	aliases {
-		serial0 = &serial_0;
-	};
-
-	chosen {
-		/* Bootloader expects bootargs specified otherwise it crashes */
-		bootargs = "";
-		stdout-path = &serial_0;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
-		pinctrl-names = "default";
-
-		button-vol-down {
-			label = "KEY_VOLUMEDOWN";
-			linux,code = <KEY_VOLUMEDOWN>;
-			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
-		button-vol-up {
-			label = "KEY_VOLUMEUP";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
-		button-power {
-			label = "KEY_POWER";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-
-	/* TODO: Remove this once PMIC is implemented  */
-	reg_placeholder: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "placeholder_reg";
-	};
-
-	/* TODO: Remove this once S2MPG11 slave PMIC is implemented  */
-	ufs_0_fixed_vcc_reg: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "ufs-vcc";
-		gpio = <&gpp0 1 GPIO_ACTIVE_HIGH>;
-		regulator-boot-on;
-		enable-active-high;
-	};
-};
-
-&ext_24_5m {
-	clock-frequency = <24576000>;
-};
-
-&ext_200m {
-	clock-frequency = <200000000>;
-};
-
-&hsi2c_8 {
-	status = "okay";
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-	};
-};
-
-&hsi2c_12 {
-	status = "okay";
-	/* TODO: add the devices once drivers exist */
-};
-
-&pinctrl_far_alive {
-	key_voldown: key-voldown-pins {
-		samsung,pins = "gpa7-3";
-		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
-		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
-		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
-	};
-
-	key_volup: key-volup-pins {
-		samsung,pins = "gpa8-1";
-		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
-		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
-		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
-	};
-};
-
-&pinctrl_gpio_alive {
-	key_power: key-power-pins {
-		samsung,pins = "gpa10-1";
-		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
-		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
-		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
-	};
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&ufs_0 {
-	status = "okay";
-	vcc-supply = <&ufs_0_fixed_vcc_reg>;
-};
-
-&ufs_0_phy {
-	status = "okay";
-};
-
-&usbdrd31 {
-	vdd10-supply = <&reg_placeholder>;
-	vdd33-supply = <&reg_placeholder>;
-	status = "okay";
-};
-
-&usbdrd31_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-	role-switch-default-mode = "peripheral";
-	maximum-speed = "super-speed-plus";
-	status = "okay";
-};
-
-&usbdrd31_phy {
-	/* TODO: Update these once PMIC is implemented */
-	pll-supply = <&reg_placeholder>;
-	dvdd-usb20-supply = <&reg_placeholder>;
-	vddh-usb20-supply = <&reg_placeholder>;
-	vdd33-usb20-supply = <&reg_placeholder>;
-	vdda-usbdp-supply = <&reg_placeholder>;
-	vddh-usbdp-supply = <&reg_placeholder>;
-	status = "okay";
-};
-
-&usi_uart {
-	samsung,clkreq-on; /* needed for UART mode */
-	status = "okay";
-};
-
-&usi8 {
-	samsung,mode = <USI_V2_I2C>;
-	status = "okay";
 };
 
-&usi12 {
-	samsung,mode = <USI_V2_I2C>;
+&cont_splash_mem {
+	reg = <0x0 0xfac00000 (1080 * 2400 * 4)>;
 	status = "okay";
 };
 
-&watchdog_cl0 {
-	timeout-sec = <30>;
+&framebuffer0 {
+	width = <1080>;
+	height = <2400>;
+	stride = <(1080 * 4)>;
+	format = "a8r8g8b8";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
new file mode 100644
index 000000000000..93892adaa679
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree nodes common for all GS101-based Pixel
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/usb/pd.h>
+#include "gs101-pinctrl.h"
+#include "gs101.dtsi"
+
+/ {
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		/* Bootloader expects bootargs specified otherwise it crashes */
+		bootargs = "";
+		stdout-path = &serial_0;
+
+		/* Use display framebuffer as setup by bootloader */
+		framebuffer0: framebuffer-0 {
+			compatible = "simple-framebuffer";
+			memory-region = <&cont_splash_mem>;
+			/* format properties to be added by actual board */
+			status = "disabled";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			label = "KEY_VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-vol-up {
+			label = "KEY_VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "KEY_POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&nvmem_reboot_mode>;
+		nvmem-cell-names = "reboot-mode";
+		mode-bootloader = <0x800000fc>;
+		mode-charge = <0x8000000a>;
+		mode-dm-verity-device-corrupted = <0x80000050>;
+		mode-fastboot = <0x800000fa>;
+		mode-reboot-ab-update = <0x80000052>;
+		mode-recovery = <0x800000ff>;
+		mode-rescue = <0x800000f9>;
+		mode-shutdown-thermal = <0x80000051>;
+		mode-shutdown-thermal-battery = <0x80000051>;
+	};
+
+	/* TODO: Remove this once PMIC is implemented  */
+	reg_placeholder: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "placeholder_reg";
+	};
+
+	/* TODO: Remove this once S2MPG11 slave PMIC is implemented  */
+	ufs_0_fixed_vcc_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "ufs-vcc";
+		gpio = <&gpp0 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		cont_splash_mem: splash@fac00000 {
+			/* size to be updated by actual board */
+			reg = <0x0 0xfac00000 0x0>;
+			no-map;
+			status = "disabled";
+		};
+	};
+};
+
+&acpm_ipc {
+	pmic {
+		compatible = "samsung,s2mpg10-pmic";
+		interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		wakeup-source;
+
+		clocks {
+			compatible = "samsung,s2mpg10-clk";
+			#clock-cells = <1>;
+			clock-output-names = "rtc32k_ap", "peri32k1",
+					     "peri32k2";
+		};
+
+		regulators {
+		};
+	};
+};
+
+&ext_24_5m {
+	clock-frequency = <24576000>;
+};
+
+&ext_200m {
+	clock-frequency = <200000000>;
+};
+
+&hsi2c_8 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&hsi2c_12 {
+	status = "okay";
+	/* TODO: add the devices once drivers exist */
+
+	usb-typec@25 {
+		compatible = "maxim,max77759-tcpci", "maxim,max33359";
+		reg = <0x25>;
+		interrupts-extended = <&gpa8 2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&typec_int>;
+		pinctrl-names = "default";
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			self-powered;
+			try-power-role = "sink";
+			op-sink-microwatt = <2600000>;
+			slow-charger-loop;
+			/*
+			 * max77759 operating in reverse boost mode (0xA) can
+			 * source up to 1.5A while extboost can only do ~1A.
+			 * Since extboost is the primary path, advertise 900mA.
+			 */
+			source-pdos = <PDO_FIXED(5000, 900,
+						 (PDO_FIXED_SUSPEND
+						  | PDO_FIXED_USB_COMM
+						  | PDO_FIXED_DATA_SWAP
+						  | PDO_FIXED_DUAL_ROLE))>;
+			sink-pdos = <PDO_FIXED(5000, 3000,
+					       (PDO_FIXED_DATA_SWAP
+						| PDO_FIXED_USB_COMM
+						| PDO_FIXED_HIGHER_CAP
+						| PDO_FIXED_DUAL_ROLE))
+				     PDO_FIXED(9000, 2200, 0)
+				     PDO_PPS_APDO(5000, 11000, 3000)>;
+			sink-vdos = <VDO_IDH(1, 1, IDH_PTYPE_PERIPH, 0,
+					     IDH_PTYPE_DFP_HOST, 2, 0x18d1)
+				     VDO_CERT(0x0)
+				     VDO_PRODUCT(0x4ee1, 0x0)
+				     VDO_UFP(UFP_VDO_VER1_2,
+					     (DEV_USB2_CAPABLE
+					      | DEV_USB3_CAPABLE),
+					     UFP_RECEPTACLE, 0,
+					     AMA_VCONN_NOT_REQ, 0,
+					     UFP_ALTMODE_NOT_SUPP,
+					     UFP_USB32_GEN1)
+				     /* padding */ 0
+				     VDO_DFP(DFP_VDO_VER1_1,
+					     (HOST_USB2_CAPABLE
+					      | HOST_USB3_CAPABLE),
+					     DFP_RECEPTACLE, 0)>;
+			sink-vdos-v1 = <VDO_IDH(1, 1, IDH_PTYPE_PERIPH, 0,
+						0, 0, 0x18d1)
+					VDO_CERT(0x0)
+					VDO_PRODUCT(0x4ee1, 0x0)>;
+			/*
+			 * Until bootloader is updated to set those two when
+			 * console is enabled, we disable PD here.
+			 */
+			pd-disable;
+			typec-power-opmode = "default";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdrd31_phy_orien_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&usbdrd31_dwc3_role_switch>;
+					};
+				};
+			};
+		};
+	};
+
+	pmic@66 {
+		compatible = "maxim,max77759";
+		reg = <0x66>;
+
+		pinctrl-0 = <&if_pmic_int>;
+		pinctrl-names = "default";
+		interrupts-extended = <&gpa8 3 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		gpio {
+			compatible = "maxim,max77759-gpio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			/*
+			 * "Human-readable name [SIGNAL_LABEL]" where the
+			 * latter comes from the schematic
+			 */
+			gpio-line-names = "OTG boost [OTG_BOOST_EN]",
+					  "max20339 IRQ [MW_OVP_INT_L]";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		nvmem-0 {
+			compatible = "maxim,max77759-nvmem";
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nvmem_reboot_mode: reboot-mode@0 {
+					reg = <0x0 0x4>;
+				};
+
+				boot-reason@4 {
+					reg = <0x4 0x4>;
+				};
+
+				shutdown-user-flag@8 {
+					reg = <0x8 0x1>;
+				};
+
+				rsoc@a {
+					reg = <0xa 0x2>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl_far_alive {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa7-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	typec_int: typec-int-pins {
+		samsung,pins = "gpa8-2";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	if_pmic_int: if-pmic-int-pins {
+		samsung,pins = "gpa8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_gpio_alive {
+	pmic_int: pmic-int-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&ufs_0 {
+	status = "okay";
+	vcc-supply = <&ufs_0_fixed_vcc_reg>;
+};
+
+&ufs_0_phy {
+	status = "okay";
+};
+
+&usbdrd31 {
+	vdd10-supply = <&reg_placeholder>;
+	vdd33-supply = <&reg_placeholder>;
+	status = "okay";
+};
+
+&usbdrd31_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	maximum-speed = "super-speed-plus";
+	status = "okay";
+
+	port {
+		usbdrd31_dwc3_role_switch: endpoint {
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usbdrd31_phy {
+	orientation-switch;
+	/* TODO: Update these once PMIC is implemented */
+	pll-supply = <&reg_placeholder>;
+	dvdd-usb20-supply = <&reg_placeholder>;
+	vddh-usb20-supply = <&reg_placeholder>;
+	vdd33-usb20-supply = <&reg_placeholder>;
+	vdda-usbdp-supply = <&reg_placeholder>;
+	vddh-usbdp-supply = <&reg_placeholder>;
+	status = "okay";
+
+	port {
+		usbdrd31_phy_orien_switch: endpoint {
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+	};
+};
+
+&usi_uart {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&usi8 {
+	samsung,mode = <USI_MODE_I2C>;
+	status = "okay";
+};
+
+&usi12 {
+	samsung,mode = <USI_MODE_I2C>;
+	status = "okay";
+};
+
+&watchdog_cl0 {
+	timeout-sec = <30>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-raven.dts b/arch/arm64/boot/dts/exynos/google/gs101-raven.dts
new file mode 100644
index 000000000000..1e7e6b34b864
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-raven.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Raven Device Tree
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023-2025 Linaro Ltd
+ */
+
+/dts-v1/;
+
+#include "gs101-pixel-common.dtsi"
+
+/ {
+	model = "Raven";
+	compatible = "google,gs101-raven", "google,gs101";
+};
+
+&cont_splash_mem {
+	reg = <0x0 0xfac00000 (1440 * 3120 * 4)>;
+	status = "okay";
+};
+
+&framebuffer0 {
+	width = <1440>;
+	height = <3120>;
+	stride = <(1440 * 4)>;
+	format = "a8r8g8b8";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 302c5beb224a..d06d1d05f364 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/clock/google,gs101.h>
+#include <dt-bindings/clock/google,gs101-acpm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/samsung,exynos-usi.h>
@@ -72,107 +73,126 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0000>;
+			clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>;
 			enable-method = "psci";
-			cpu-idle-states = <&ANANKE_CPU_SLEEP>;
+			cpu-idle-states = <&ananke_cpu_sleep>;
 			capacity-dmips-mhz = <250>;
 			dynamic-power-coefficient = <70>;
+			operating-points-v2 = <&cpucl0_opp_table>;
 		};
 
 		cpu1: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0100>;
+			clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>;
 			enable-method = "psci";
-			cpu-idle-states = <&ANANKE_CPU_SLEEP>;
+			cpu-idle-states = <&ananke_cpu_sleep>;
 			capacity-dmips-mhz = <250>;
 			dynamic-power-coefficient = <70>;
+			operating-points-v2 = <&cpucl0_opp_table>;
 		};
 
 		cpu2: cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0200>;
+			clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>;
 			enable-method = "psci";
-			cpu-idle-states = <&ANANKE_CPU_SLEEP>;
+			cpu-idle-states = <&ananke_cpu_sleep>;
 			capacity-dmips-mhz = <250>;
 			dynamic-power-coefficient = <70>;
+			operating-points-v2 = <&cpucl0_opp_table>;
 		};
 
 		cpu3: cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0300>;
+			clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>;
 			enable-method = "psci";
-			cpu-idle-states = <&ANANKE_CPU_SLEEP>;
+			cpu-idle-states = <&ananke_cpu_sleep>;
 			capacity-dmips-mhz = <250>;
 			dynamic-power-coefficient = <70>;
+			operating-points-v2 = <&cpucl0_opp_table>;
 		};
 
 		cpu4: cpu@400 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a76";
 			reg = <0x0400>;
+			clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL1>;
 			enable-method = "psci";
-			cpu-idle-states = <&ENYO_CPU_SLEEP>;
+			cpu-idle-states = <&enyo_cpu_sleep>;
 			capacity-dmips-mhz = <620>;
 			dynamic-power-coefficient = <284>;
+			operating-points-v2 = <&cpucl1_opp_table>;
 		};
 
 		cpu5: cpu@500 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a76";
 			reg = <0x0500>;
+			clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL1>;
 			enable-method = "psci";
-			cpu-idle-states = <&ENYO_CPU_SLEEP>;
+			cpu-idle-states = <&enyo_cpu_sleep>;
 			capacity-dmips-mhz = <620>;
 			dynamic-power-coefficient = <284>;
+			operating-points-v2 = <&cpucl1_opp_table>;
 		};
 
 		cpu6: cpu@600 {
 			device_type = "cpu";
 			compatible = "arm,cortex-x1";
 			reg = <0x0600>;
+			clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL2>;
 			enable-method = "psci";
-			cpu-idle-states = <&HERA_CPU_SLEEP>;
+			cpu-idle-states = <&hera_cpu_sleep>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <650>;
+			operating-points-v2 = <&cpucl2_opp_table>;
 		};
 
 		cpu7: cpu@700 {
 			device_type = "cpu";
 			compatible = "arm,cortex-x1";
 			reg = <0x0700>;
+			clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL2>;
 			enable-method = "psci";
-			cpu-idle-states = <&HERA_CPU_SLEEP>;
+			cpu-idle-states = <&hera_cpu_sleep>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <650>;
+			operating-points-v2 = <&cpucl2_opp_table>;
 		};
 
 		idle-states {
 			entry-method = "psci";
 
-			ANANKE_CPU_SLEEP: cpu-ananke-sleep {
+			ananke_cpu_sleep: cpu-ananke-sleep {
 				idle-state-name = "c2";
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
 				entry-latency-us = <70>;
 				exit-latency-us = <160>;
 				min-residency-us = <2000>;
 			};
 
-			ENYO_CPU_SLEEP: cpu-enyo-sleep {
+			enyo_cpu_sleep: cpu-enyo-sleep {
 				idle-state-name = "c2";
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
 				entry-latency-us = <150>;
 				exit-latency-us = <190>;
 				min-residency-us = <2500>;
 			};
 
-			HERA_CPU_SLEEP: cpu-hera-sleep {
+			hera_cpu_sleep: cpu-hera-sleep {
 				idle-state-name = "c2";
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
 				entry-latency-us = <235>;
 				exit-latency-us = <220>;
 				min-residency-us = <3500>;
@@ -180,6 +200,273 @@
 		};
 	};
 
+	cpucl0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <537500>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-574000000 {
+			opp-hz = /bits/ 64 <574000000>;
+			opp-microvolt = <600000>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-738000000 {
+			opp-hz = /bits/ 64 <738000000>;
+			opp-microvolt = <618750>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-930000000 {
+			opp-hz = /bits/ 64 <930000000>;
+			opp-microvolt = <668750>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1098000000 {
+			opp-hz = /bits/ 64 <1098000000>;
+			opp-microvolt = <712500>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1197000000 {
+			opp-hz = /bits/ 64 <1197000000>;
+			opp-microvolt = <731250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1328000000 {
+			opp-hz = /bits/ 64 <1328000000>;
+			opp-microvolt = <762500>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1401000000 {
+			opp-hz = /bits/ 64 <1401000000>;
+			opp-microvolt = <781250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1598000000 {
+			opp-hz = /bits/ 64 <1598000000>;
+			opp-microvolt = <831250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <862500>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1803000000 {
+			opp-hz = /bits/ 64 <1803000000>;
+			opp-microvolt = <906250>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
+	cpucl1_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <506250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-553000000 {
+			opp-hz = /bits/ 64 <553000000>;
+			opp-microvolt = <537500>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-696000000 {
+			opp-hz = /bits/ 64 <696000000>;
+			opp-microvolt = <562500>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-799000000 {
+			opp-hz = /bits/ 64 <799000000>;
+			opp-microvolt = <581250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-910000000 {
+			opp-hz = /bits/ 64 <910000000>;
+			opp-microvolt = <606250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1024000000 {
+			opp-hz = /bits/ 64 <1024000000>;
+			opp-microvolt = <625000>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1197000000 {
+			opp-hz = /bits/ 64 <1197000000>;
+			opp-microvolt = <662500>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1328000000 {
+			opp-hz = /bits/ 64 <1328000000>;
+			opp-microvolt = <687500>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1491000000 {
+			opp-hz = /bits/ 64 <1491000000>;
+			opp-microvolt = <731250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1663000000 {
+			opp-hz = /bits/ 64 <1663000000>;
+			opp-microvolt = <775000>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1836000000 {
+			opp-hz = /bits/ 64 <1836000000>;
+			opp-microvolt = <818750>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1999000000 {
+			opp-hz = /bits/ 64 <1999000000>;
+			opp-microvolt = <868750>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-2130000000 {
+			opp-hz = /bits/ 64 <2130000000>;
+			opp-microvolt = <918750>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-2253000000 {
+			opp-hz = /bits/ 64 <2253000000>;
+			opp-microvolt = <968750>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
+	cpucl2_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <500000>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-851000000 {
+			opp-hz = /bits/ 64 <851000000>;
+			opp-microvolt = <556250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-984000000 {
+			opp-hz = /bits/ 64 <984000000>;
+			opp-microvolt = <575000>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1106000000 {
+			opp-hz = /bits/ 64 <1106000000>;
+			opp-microvolt = <606250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1277000000 {
+			opp-hz = /bits/ 64 <1277000000>;
+			opp-microvolt = <631250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1426000000 {
+			opp-hz = /bits/ 64 <1426000000>;
+			opp-microvolt = <662500>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1582000000 {
+			opp-hz = /bits/ 64 <1582000000>;
+			opp-microvolt = <693750>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1745000000 {
+			opp-hz = /bits/ 64 <1745000000>;
+			opp-microvolt = <731250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-1826000000 {
+			opp-hz = /bits/ 64 <1826000000>;
+			opp-microvolt = <750000>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-2048000000 {
+			opp-hz = /bits/ 64 <2048000000>;
+			opp-microvolt = <793750>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-2188000000 {
+			opp-hz = /bits/ 64 <2188000000>;
+			opp-microvolt = <831250>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-2252000000 {
+			opp-hz = /bits/ 64 <2252000000>;
+			opp-microvolt = <850000>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-2401000000 {
+			opp-hz = /bits/ 64 <2401000000>;
+			opp-microvolt = <887500>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-2507000000 {
+			opp-hz = /bits/ 64 <2507000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-2630000000 {
+			opp-hz = /bits/ 64 <2630000000>;
+			opp-microvolt = <968750>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-2704000000 {
+			opp-hz = /bits/ 64 <2704000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+
+		opp-2802000000 {
+			opp-hz = /bits/ 64 <2802000000>;
+			opp-microvolt = <1056250>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
 	/* ect node is required to be present by bootloader */
 	ect {
 	};
@@ -196,6 +483,15 @@
 		clock-output-names = "ext-200m";
 	};
 
+	firmware {
+		acpm_ipc: power-management {
+			compatible = "google,gs101-acpm-ipc";
+			#clock-cells = <1>;
+			mboxes = <&ap2apm_mailbox>;
+			shmem = <&apm_sram>;
+		};
+	};
+
 	pmu-0 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
@@ -277,13 +573,19 @@
 
 		cmu_misc: clock-controller@10010000 {
 			compatible = "google,gs101-cmu-misc";
-			reg = <0x10010000 0x8000>;
+			reg = <0x10010000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>,
 				 <&cmu_top CLK_DOUT_CMU_MISC_SSS>;
 			clock-names = "bus", "sss";
 		};
 
+		sysreg_misc: syscon@10030000 {
+			compatible = "google,gs101-misc-sysreg", "syscon";
+			reg = <0x10030000 0x10000>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_SYSREG_MISC_PCLK>;
+		};
+
 		timer@10050000 {
 			compatible = "google,gs101-mct",
 				     "samsung,exynos4210-mct";
@@ -330,6 +632,7 @@
 
 		gic: interrupt-controller@10400000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <4>;
 			interrupt-controller;
 			reg = <0x10400000 0x10000>, /* GICD */
@@ -353,7 +656,7 @@
 
 		cmu_peric0: clock-controller@10800000 {
 			compatible = "google,gs101-cmu-peric0";
-			reg = <0x10800000 0x4000>;
+			reg = <0x10800000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&ext_24_5m>,
 				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
@@ -825,7 +1128,7 @@
 				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 			clock-names = "pclk", "ipclk";
 			samsung,sysreg = <&sysreg_peric0 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			status = "disabled";
 
 			serial_0: serial@10a00000 {
@@ -899,7 +1202,7 @@
 
 		cmu_peric1: clock-controller@10c00000 {
 			compatible = "google,gs101-cmu-peric1";
-			reg = <0x10c00000 0x4000>;
+			reg = <0x10c00000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&ext_24_5m>,
 				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
@@ -1253,7 +1556,7 @@
 
 		cmu_hsi0: clock-controller@11000000 {
 			compatible = "google,gs101-cmu-hsi0";
-			reg = <0x11000000 0x4000>;
+			reg = <0x11000000 0x10000>;
 			#clock-cells = <1>;
 
 			clocks = <&ext_24_5m>,
@@ -1265,9 +1568,15 @@
 				      "usbdpdbg";
 		};
 
+		sysreg_hsi0: syscon@11020000 {
+			compatible = "google,gs101-hsi0-sysreg", "syscon";
+			reg = <0x11020000 0x10000>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_SYSREG_HSI0_PCLK>;
+		};
+
 		usbdrd31_phy: phy@11100000 {
 			compatible = "google,gs101-usb31drd-phy";
-			reg = <0x11100000 0x0100>,
+			reg = <0x11100000 0x0200>,
 			      <0x110f0000 0x0800>,
 			      <0x110e0000 0x2800>;
 			reg-names = "phy", "pcs", "pma";
@@ -1302,6 +1611,9 @@
 				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
 				phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,has-lpm-erratum;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				status = "disabled";
 			};
 		};
@@ -1317,7 +1629,7 @@
 
 		cmu_hsi2: clock-controller@14400000 {
 			compatible = "google,gs101-cmu-hsi2";
-			reg = <0x14400000 0x4000>;
+			reg = <0x14400000 0x10000>;
 			#clock-cells = <1>;
 			clocks = <&ext_24_5m>,
 				 <&cmu_top CLK_DOUT_CMU_HSI2_BUS>,
@@ -1357,6 +1669,7 @@
 				 <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
 			clock-names = "core_clk", "sclk_unipro_main", "fmp",
 				      "aclk", "pclk", "sysreg";
+			dma-coherent;
 			freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>;
 			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
 			pinctrl-names = "default";
@@ -1379,38 +1692,54 @@
 
 		cmu_apm: clock-controller@17400000 {
 			compatible = "google,gs101-cmu-apm";
-			reg = <0x17400000 0x8000>;
+			reg = <0x17400000 0x10000>;
 			#clock-cells = <1>;
 
 			clocks = <&ext_24_5m>;
 			clock-names = "oscclk";
 		};
 
-		sysreg_apm: syscon@174204e0 {
+		sysreg_apm: syscon@17420000 {
 			compatible = "google,gs101-apm-sysreg", "syscon";
-			reg = <0x174204e0 0x1000>;
+			reg = <0x17420000 0x10000>;
 		};
 
 		pmu_system_controller: system-controller@17460000 {
 			compatible = "google,gs101-pmu", "syscon";
 			reg = <0x17460000 0x10000>;
+			google,pmu-intr-gen-syscon = <&pmu_intr_gen>;
 
 			poweroff: syscon-poweroff {
 				compatible = "syscon-poweroff";
-				regmap = <&pmu_system_controller>;
 				offset = <0x3e9c>; /* PAD_CTRL_PWR_HOLD */
-				mask = <0x100>; /* reset value */
+				mask = <0x00000100>;
+				value = <0x0>;
 			};
 
 			reboot: syscon-reboot {
-				compatible = "syscon-reboot";
-				regmap = <&pmu_system_controller>;
-				offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
-				mask = <0x2>; /* SWRESET_SYSTEM */
-				value = <0x2>; /* reset value */
+				compatible = "google,gs101-reboot";
+			};
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x0810>; /* EXYNOS_PMU_SYSIP_DAT0 */
+				mode-bootloader = <0xfc>;
+				mode-charge = <0x0a>;
+				mode-dm-verity-device-corrupted = <0x50>;
+				mode-fastboot = <0xfa>;
+				mode-reboot-ab-update = <0x52>;
+				mode-recovery = <0xff>;
+				mode-rescue = <0xf9>;
+				mode-shutdown-thermal = <0x51>;
+				mode-shutdown-thermal-battery = <0x51>;
 			};
 		};
 
+		pmu_intr_gen: syscon@17470000 {
+			compatible = "google,gs101-pmu-intr-gen", "syscon";
+			reg = <0x17470000 0x10000>;
+		};
+
 		pinctrl_gpio_alive: pinctrl@174d0000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x174d0000 0x00001000>;
@@ -1437,6 +1766,15 @@
 			};
 		};
 
+		ap2apm_mailbox: mailbox@17610000 {
+			compatible = "google,gs101-mbox";
+			reg = <0x17610000 0x1000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_MAILBOX_APM_AP_PCLK>;
+			clock-names = "pclk";
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <0>;
+		};
+
 		pinctrl_gsactrl: pinctrl@17940000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x17940000 0x00001000>;
@@ -1451,11 +1789,12 @@
 			/* TODO: update once support for this CMU exists */
 			clocks = <0>;
 			clock-names = "pclk";
+			status = "disabled";
 		};
 
 		cmu_top: clock-controller@1e080000 {
 			compatible = "google,gs101-cmu-top";
-			reg = <0x1e080000 0x8000>;
+			reg = <0x1e080000 0x10000>;
 			#clock-cells = <1>;
 
 			clocks = <&ext_24_5m>;
@@ -1463,6 +1802,14 @@
 		};
 	};
 
+	apm_sram: sram@2039000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x2039000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x2039000 0x40000>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts =
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 42e6482a31cb..f30d3fd724d0 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -5,6 +5,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
@@ -104,7 +106,12 @@ dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8dx-colibri-iris.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
+
+imx8dxl-evk-pcie-ep-dtbs += imx8dxl-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk-pcie-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdp-mba8xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdps-mb-smarc-2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
@@ -112,6 +119,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-emtop-baseboard.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
+
+imx8mm-evk-pcie-ep-dtbs += imx8mm-evk.dtb imx-pcie0-ep.dtbo
+imx8mm-evkb-pcie-ep-dtbs += imx8mm-evkb.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk-pcie-ep.dtb imx8mm-evkb-pcie-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-iot-gateway.dtb
@@ -122,6 +134,25 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
+
+imx8mm-phyboard-polis-peb-av-10-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-av-10.dtbo
+imx8mm-phyboard-polis-peb-av-10-etml1010g3dra-dtbs += imx8mm-phyboard-polis-rdk.dtb \
+	imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtbo
+imx8mm-phyboard-polis-peb-av-10-ph128800t006-dtbs += imx8mm-phyboard-polis-rdk.dtb \
+	imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtbo
+imx8mm-phyboard-polis-peb-eval-01-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-eval-01.dtbo
+imx8mm-phycore-no-eth-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-no-eth.dtbo
+imx8mm-phycore-no-spiflash-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-no-spiflash.dtbo
+imx8mm-phycore-rpmsg-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-rpmsg.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-eval-01.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-no-eth.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-no-spiflash.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-rpmsg.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
@@ -165,7 +196,13 @@ imx8mn-tqma8mqnl-mba8mx-usbotg-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8m
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-usbotg.dtb
 
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-adpismarc.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-helios.dtb
+imx8mp-aristainetos3-helios-lvds-dtbs += imx8mp-aristainetos3-helios.dtb imx8mp-aristainetos3-helios-lvds.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-helios-lvds.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-proton2s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-cubox-m.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb
@@ -173,7 +210,12 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-drc02.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-picoitx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-edm-g-wb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-mate.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-ripple.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
@@ -182,17 +224,52 @@ imx8mp-kontron-dl-dtbs += imx8mp-kontron-bl-osm-s.dtb imx8mp-kontron-dl.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-dl.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-smarc-eval-carrier.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-libra-rdk-fpsc.dtb
+imx8mp-libra-rdk-fpsc-lvds-dtbs += imx8mp-libra-rdk-fpsc.dtb imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-libra-rdk-fpsc-lvds.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-enc-carrier-board.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-smarc-universal-board.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+imx8mp-phyboard-pollux-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
+	imx8mp-phyboard-pollux-etml1010g3dra.dtbo
+imx8mp-phyboard-pollux-peb-av-10-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
+	imx8mp-phyboard-pollux-peb-av-10.dtbo
+imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
+	imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtbo
+imx8mp-phyboard-pollux-peb-av-10-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
+	imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtbo
+imx8mp-phyboard-pollux-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
+	imx8mp-phyboard-pollux-ph128800t006.dtbo
 imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-etml1010g3dra.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-ph128800t006.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-eth.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-prt8ml.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-basic.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-bd500.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-jutouch-jt101tm023.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb
+
+imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10-dtbs += imx8mp-tx8p-ml81-moduline-display-106.dtb \
+	imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtbo
+imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17-dtbs += imx8mp-tx8p-ml81-moduline-display-106.dtb \
+	imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-ultra-mach-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
@@ -211,17 +288,34 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
 
+imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtbo
+imx8mp-evk-lvds0-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-lvds-hdmi.dtbo
+imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtbo
+imx8mp-evk-lvds1-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-lvds-hdmi.dtbo
 imx8mp-evk-mx8-dlvds-lcd1-dtbs += imx8mp-evk.dtb imx8mp-evk-mx8-dlvds-lcd1.dtbo
-imx8mp-evk-pcie-ep-dtbs += imx8mp-evk.dtb imx8mp-evk-pcie-ep.dtbo
+imx8mp-evk-pcie-ep-dtbs += imx8mp-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds0-imx-lvds-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-lvds-hdmi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-mx8-dlvds-lcd1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-pcie-ep.dtb
 
-imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
+imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo
 imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo
-dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
+imx8mp-tqma8mpql-mba8mp-ras314-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo
+imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-imx219.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+imx8mq-evk-pcie1-ep-dtbs += imx8mq-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk-pcie1-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
@@ -248,14 +342,34 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval-v1.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
+
+imx8qm-mek-ov5640-csi0-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi0.dtb
+imx8qm-mek-ov5640-csi1-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi1.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi1.dtb
+imx8qm-mek-ov5640-dual-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo imx8qm-mek-ov5640-csi1.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-dual.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+
+imx8qxp-mek-pcie-ep-dtbs += imx8qxp-mek.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek-pcie-ep.dtb
+
+imx8qxp-mek-ov5640-csi-dtbs := imx8qxp-mek.dtb imx8qxp-mek-ov5640-csi.dtbo
+dtb-${CONFIG_ARCH_MXC} += imx8qxp-mek-ov5640-csi.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8ulp-9x9-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-phyboard-segin.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
 
 imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo
@@ -264,15 +378,47 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb-i3c.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
+
+imx93-phyboard-nash-jtag-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-jtag.dtbo
+imx93-phyboard-nash-peb-wlbt-07-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-peb-wlbt-07.dtbo
+imx93-phyboard-nash-pwm-fan-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-pwm-fan.dtbo
+imx93-phyboard-segin-peb-eval-01-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-eval-01.dtbo
+imx93-phyboard-segin-peb-wlbt-05-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-wlbt-05.dtbo
+imx93-phycore-rpmsg-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-segin.dtb imx93-phycore-rpmsg.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-jtag.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-peb-wlbt-07.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-pwm-fan.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-eval-01.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-wlbt-05.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-rpmsg.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
+
+imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb
+imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo
+imx95-19x19-evk-pcie1-ep-dtbs += imx95-19x19-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-pcie0-ep.dtb imx95-19x19-evk-pcie1-ep.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-libra-rdk-fpsc.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-verdin-evk.dtb
 
 imx8mm-kontron-dl-dtbs			:= imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
+imx8mm-kontron-bl-lte-dtbs		:= imx8mm-kontron-bl.dtb imx8mm-kontron-bl-lte.dtbo
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-lte.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
 imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts
new file mode 100644
index 000000000000..07026b067320
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+#include "fsl-ls1012a-tqmls1012al-mbls1012al.dts"
+
+&esdhc0 {
+	vqmmc-supply = <&reg_1v8>;
+	/delete-property/ no-mmc;
+	/delete-property/ sd-uhs-sdr12;
+	/delete-property/ sd-uhs-sdr25;
+	/delete-property/ sd-uhs-sdr50;
+	/delete-property/ sd-uhs-sdr104;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	no-sd;
+	voltage-ranges = <1800 1800>;
+	non-removable;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts
new file mode 100644
index 000000000000..e46cc1a07f0c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "fsl-ls1012a-tqmls1012al.dtsi"
+
+/ {
+	model = "TQ-Systems TQMLS1012AL on MBLS1012AL";
+	compatible = "tq,ls1012a-tqmls1012al-mbls1012al", "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
+	chassis-type = "embedded";
+
+	aliases {
+		/* use MAC from U-Boot environment */
+		/* TODO: PFE */
+		ethernet2 = &swport0;
+		ethernet3 = &swport1;
+		ethernet4 = &swport2;
+		ethernet5 = &swport3;
+		serial0 = &duart0;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = &duart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-1 {
+			label = "S2";
+			linux,code = <BTN_0>;
+			gpios = <&gpio_exp_3p3v 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-2 {
+			label = "X15";
+			linux,code = <BTN_1>;
+			gpios = <&gpio_exp_1p8v 5 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			label = "X16";
+			linux,code = <BTN_2>;
+			gpios = <&gpio_exp_1p8v 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio_exp_3p3v 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_exp_3p3v 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 64 MiB */
+			size = <0 0x04000000>;
+			/*  512 - 128 MiB, our minimum RAM config will be 512 MiB */
+			alloc-ranges = <0 0x80000000 0 0x98000000>;
+			linux,cma-default;
+		};
+	};
+
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p5v_pcie: regulator-1p5v-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_PCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_1p8v 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v5>;
+	};
+
+	reg_1p5v_wlan: regulator-1p5v-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_WLAN";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_1p8v 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v5>;
+	};
+
+	reg_1v8: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_pcie: regulator-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_3p3v 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_3v3_wlan: regulator-3v3-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_WLAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_3p3v 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&esdhc0 {
+	vmmc-supply = <&reg_3v3>;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&i2c0 {
+	gpio_exp_3p3v: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "", "", "GPIO_3V3_3", "",
+				  "", "", "", "",
+				  "", "GPIO_3V3_1", "GPIO_3V3_2", "",
+				  "", "", "", "";
+
+		wlan-disable-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "WLAN_DISABLE#";
+		};
+
+		pcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_RST#";
+		};
+
+		wlan-rst-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "WLAN_RST#";
+		};
+
+		pcie-dis-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_DIS#";
+		};
+
+		pcie-wake-hog {
+			gpio-hog;
+			gpios = <12 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "PCIE_WAKE#";
+		};
+	};
+
+	lm75_48: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		vs-supply = <&reg_3v3>;
+	};
+
+	switch@5f {
+		compatible = "microchip,ksz9897";
+		reg = <0x5f>;
+		reset-gpios = <&gpio_exp_3p3v 7 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			swport0: port@0 {
+				reg = <0>;
+				label = "swp0";
+				phy-mode = "internal";
+			};
+
+			swport1: port@1 {
+				reg = <1>;
+				label = "swp1";
+				phy-mode = "internal";
+			};
+
+			swport2: port@2 {
+				reg = <2>;
+				label = "swp2";
+				phy-mode = "internal";
+			};
+
+			swport3: port@3 {
+				reg = <3>;
+				label = "swp3";
+				phy-mode = "internal";
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				/* TODO: PFE */
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <1500>;
+				tx-internal-delay-ps = <1500>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	gpio_exp_1p8v: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_1v8>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "PCIE_CLK_PD#", "PMIC_INT#", "ETH_SW_INT#", "",
+				  "", "", "", "",
+				  "", "GPIO_3V3_1", "GPIO_3V3_2", "",
+				  "", "", "", "";
+
+		/* do not change PCIE_CLK_PD */
+		pcie-clk-pd-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_CLK_PD#";
+		};
+
+		pmic-int-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "PMIC_INT#";
+		};
+
+		eth-sw-int-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "ETH_SW_INT#";
+		};
+
+		eth-link-pwrdwn-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "ETH_LINK_PWRDWN#";
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+/* TODO: PFE */
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
new file mode 100644
index 000000000000..7c5a3dee91b9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	compatible = "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
+
+	memory@80000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 512 MiB */
+		reg = <0x00000000 0x80000000 0 0x20000000>;
+	};
+
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	jc42_19: temperature-sensor@19 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x19>;
+	};
+
+	m24c64_50: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	m24c02_51: eeprom@51 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	rtc1: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <39000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&reg_vcc_1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index dd479889658d..ef80bf6a604f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -87,6 +87,7 @@
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
@@ -492,10 +493,11 @@
 		};
 
 		usb0: usb@2f00000 {
-			compatible = "snps,dwc3";
+			compatible = "fsl,ls1012a-dwc3", "fsl,ls1028a-dwc3";
 			reg = <0x0 0x2f00000 0x0 0x10000>;
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
+			dma-coherent;
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 7d172d7e5737..e7f9c9319319 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -613,9 +613,11 @@
 		};
 
 		usb0: usb@3100000 {
-			compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+			compatible = "fsl,ls1028a-dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&smmu 1>;
+			dma-coherent;
 			snps,dis_rxdet_inp3_quirk;
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
@@ -623,9 +625,11 @@
 		};
 
 		usb1: usb@3110000 {
-			compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+			compatible = "fsl,ls1028a-dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&smmu 2>;
+			dma-coherent;
 			snps,dis_rxdet_inp3_quirk;
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
index 03748a7f657b..e04483fdb908 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
@@ -41,9 +41,21 @@
 	wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 };
 
+&sfp1 {
+	status = "okay";
+};
+
+&sfp1_i2c {
+	status = "okay";
+};
+
 &usb2 {
 	status = "okay";
 };
 
 #include "fsl-ls1043-post.dtsi"
 #include "tqmls104xa-mbls10xxa-fman.dtsi"
+
+&enet6 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
index 12d5f3938e5d..257d90bb9c20 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
@@ -17,11 +17,10 @@
 	qflash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <62500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index c0e3e8fa1e79..50d9b03a284a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -289,6 +289,7 @@
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
@@ -550,6 +551,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 36>,
+			       <&edma0 1 37>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -563,6 +567,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 34>,
+			       <&edma0 1 35>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -576,6 +583,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 40>,
+			       <&edma0 1 41>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -717,6 +727,9 @@
 			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 32>,
+			       <&edma0 1 33>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -727,6 +740,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 30>,
+			       <&edma0 1 31>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -737,6 +753,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 28>,
+			       <&edma0 1 29>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -747,6 +766,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 26>,
+			       <&edma0 1 27>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -757,6 +779,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 24>,
+			       <&edma0 1 25>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -767,6 +792,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 22>,
+			       <&edma0 1 23>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -805,10 +833,11 @@
 			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
 
 			usb0: usb@2f00000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1043a-dwc3", "fsl,ls1028a-dwc3";
 				reg = <0x0 0x2f00000 0x0 0x10000>;
 				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
+				dma-coherent;
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
 				usb3-lpm-capable;
@@ -817,10 +846,11 @@
 			};
 
 			usb1: usb@3000000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1043a-dwc3", "fsl,ls1028a-dwc3";
 				reg = <0x0 0x3000000 0x0 0x10000>;
 				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
+				dma-coherent;
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
 				usb3-lpm-capable;
@@ -829,10 +859,11 @@
 			};
 
 			usb2: usb@3100000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1043a-dwc3", "fsl,ls1028a-dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
+				dma-coherent;
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
 				usb3-lpm-capable;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index 736722b58e77..48a6c08fcea8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -42,6 +42,21 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp1_i2c>;
+		maximum-power-milliwatt = <2000>;
+		mod-def0-gpios = <&stat_pres2 6 GPIO_ACTIVE_LOW>;
+	};
+
+	sfp2: sfp-2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp2_i2c>;
+		maximum-power-milliwatt = <2000>;
+		mod-def0-gpios = <&stat_pres2 7 GPIO_ACTIVE_LOW>;
+	};
+
 };
 
 &dspi {
@@ -139,6 +154,31 @@
 				reg = <0x4c>;
 			};
 		};
+
+		i2c@7 {
+			reg = <0x7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9547";
+				reg = <0x76>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sfp1_i2c: i2c@6 {
+					reg = <0x6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				sfp2_i2c: i2c@7 {
+					reg = <0x7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
 	};
 };
 
@@ -166,8 +206,20 @@
 
 	fpga: board-control@2,0 {
 		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
 		reg = <0x2 0x0 0x0000100>;
 		ranges = <0 2 0 0x100>;
+
+		stat_pres2: gpio@c {
+			compatible = "fsl,ls1046aqds-fpga-gpio-stat-pres2";
+			reg = <0xc 1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"SLOT1", "SLOT2", "SLOT3", "SLOT4", "SLOT5", "SLOT6",
+				"SFP1_MOD_DEF", "SFP2_MOD_DEF";
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
index 37834ae3deac..43261cda3fcf 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
@@ -44,6 +44,22 @@
 	wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 };
 
+&sfp1 {
+	status = "okay";
+};
+
+&sfp2 {
+	status = "okay";
+};
+
+&sfp1_i2c {
+	status = "okay";
+};
+
+&sfp2_i2c {
+	status = "okay";
+};
+
 &usb2 {
 	status = "okay";
 };
@@ -51,6 +67,10 @@
 #include "fsl-ls1046-post.dtsi"
 #include "tqmls104xa-mbls10xxa-fman.dtsi"
 
+&enet6 {
+	status = "okay";
+};
+
 &enet7 {
-	status = "disabled";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
index 4a8f8bc688f5..fa543db99def 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
@@ -17,11 +17,10 @@
 	qflash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <62500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
 
 		partitions {
 			compatible = "fixed-partitions";
@@ -38,5 +37,6 @@
 		spi-max-frequency = <62500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 0baf256b4400..22173d69713d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -260,6 +260,7 @@
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
@@ -523,6 +524,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 36>,
+			       <&edma0 1 37>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -535,6 +539,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 34>,
+			       <&edma0 1 35>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -547,6 +554,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 40>,
+			       <&edma0 1 41>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -633,6 +643,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 32>,
+			       <&edma0 1 33>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -643,6 +656,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 30>,
+			       <&edma0 1 31>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -653,6 +669,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 28>,
+			       <&edma0 1 29>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -663,6 +682,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 26>,
+			       <&edma0 1 27>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -673,6 +695,9 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 24>,
+			       <&edma0 1 25>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -683,15 +708,19 @@
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 22>,
+			       <&edma0 1 23>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
+			compatible = "fsl,ls1046a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
+			big-endian;
 		};
 
 		edma0: dma-controller@2c00000 {
@@ -720,10 +749,11 @@
 			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
 
 			usb0: usb@2f00000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1046a-dwc3", "fsl,ls1028a-dwc3";
 				reg = <0x0 0x2f00000 0x0 0x10000>;
 				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
+				dma-coherent;
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
@@ -731,10 +761,11 @@
 			};
 
 			usb1: usb@3000000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1046a-dwc3", "fsl,ls1028a-dwc3";
 				reg = <0x0 0x3000000 0x0 0x10000>;
 				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
+				dma-coherent;
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
@@ -742,10 +773,11 @@
 			};
 
 			usb2: usb@3100000 {
-				compatible = "snps,dwc3";
+				compatible = "fsl,ls1046a-dwc3", "fsl,ls1028a-dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
+				dma-coherent;
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
 				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index bc0d89427fbe..71765ec91745 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -87,6 +87,22 @@
 		los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <2000>;
 	};
+
+	usb1v2_supply: regulator-usbhub-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhub_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	system3v3_supply: regulator-system-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "system_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 /* XG1 - Upper SFP */
@@ -231,6 +247,16 @@
 		compatible = "atmel,at97sc3204t";
 		reg = <0x29>;
 	};
+
+	usbhub: usb-hub@2d {
+		compatible = "microchip,usb5744";
+		reg = <0x2d>;
+	};
+
+	uc: board-controller@7e {
+		compatible = "traverse,ten64-controller";
+		reg = <0x7e>;
+	};
 };
 
 &i2c2 {
@@ -378,10 +404,32 @@
 	};
 };
 
+/* LS1088A USB Port 0 - direct to bottom USB-A port */
 &usb0 {
 	status = "okay";
 };
 
+/* LS1088A USB Port 1 - to Microchip USB5744 USB Hub */
 &usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&usbhub>;
+		vdd-supply = <&system3v3_supply>;
+		vdd2-supply = <&usb1v2_supply>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&usbhub>;
+		vdd-supply = <&system3v3_supply>;
+		vdd2-supply = <&usb1v2_supply>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
index e567918f6afc..181eeab55aa0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
@@ -53,6 +53,14 @@
 	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 };
 
+&sfp1 {
+	status = "okay";
+};
+
+&sfp2 {
+	status = "okay";
+};
+
 &sfp1_i2c {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
index 9a0f21484be9..b8a213df238a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
@@ -17,11 +17,10 @@
 	qflash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <62500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
 
 		partitions {
 			compatible = "fixed-partitions";
@@ -38,5 +37,6 @@
 		spi-max-frequency = <62500000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vcc1v8>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 9d5726378aa0..b2f6cd237be0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -489,10 +489,12 @@
 		};
 
 		usb0: usb@3100000 {
-			compatible = "snps,dwc3";
+			compatible = "fsl,ls1088a-dwc3", "fsl,ls1028a-dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
+			iommus = <&smmu 1>;
+			dma-coherent;
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
@@ -500,10 +502,12 @@
 		};
 
 		usb1: usb@3110000 {
-			compatible = "snps,dwc3";
+			compatible = "fsl,ls1088a-dwc3", "fsl,ls1028a-dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
+			iommus = <&smmu 2>;
+			dma-coherent;
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index e4b727070814..eec2cd6c6d32 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -41,6 +41,7 @@
 	rgmii_phy1: ethernet-phy@1 {
 		reg = <1>;
 		qca,smarteee-tw-us-1g = <24>;
+		interrupts-extended = <&gpio2 4 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
 
@@ -156,6 +157,7 @@
 	rtc@51 {
 		compatible = "nxp,pcf2129";
 		reg = <0x51>;
+		interrupts-extended = <&gpio2 8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
index a7dcbecc1f41..af6258b2fe82 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -96,6 +96,14 @@
 	status = "okay";
 };
 
+&pcie3 {
+	status = "okay";
+};
+
+&pcie5 {
+	status = "okay";
+};
+
 &pcs_mdio7 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 4d721197d837..d8ef68ad3bcc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -6,7 +6,7 @@
 
 /dts-v1/;
 
-#include "fsl-lx2160a.dtsi"
+#include "fsl-lx2160a-rev2.dtsi"
 
 / {
 	model = "NXP Layerscape LX2160AQDS";
@@ -43,12 +43,22 @@
 			reg = <0x00>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-id001c.c916";
+				reg = <0x1>;
+			};
 		};
 
 		mdio@8 { /* On-board PHY #2 RGMI2*/
 			reg = <0x8>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				compatible = "ethernet-phy-id001c.c916";
+				reg = <0x2>;
+			};
 		};
 
 		mdio@18 { /* Slot #1 */
@@ -169,6 +179,16 @@
 	status = "okay";
 };
 
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
 &dspi0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 0c44b3cbef77..935f421475ac 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -6,7 +6,7 @@
 
 /dts-v1/;
 
-#include "fsl-lx2160a.dtsi"
+#include "fsl-lx2160a-rev2.dtsi"
 
 / {
 	model = "NXP Layerscape LX2160ARDB";
@@ -31,6 +31,28 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	sfp2: sfp-2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp2_i2c>;
+		maximum-power-milliwatt = <2000>;
+		/* Leave commented out if using DPMAC_LINK_TYPE_FIXED mode */
+		/* tx-disable-gpios = <&sfp2_csr 0 GPIO_ACTIVE_HIGH>; */
+		los-gpios = <&sfp2_csr 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfp2_csr 5 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfp2_csr 7 GPIO_ACTIVE_LOW>;
+	};
+
+	sfp3: sfp-3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp3_i2c>;
+		maximum-power-milliwatt = <2000>;
+		/* Leave commented out if using DPMAC_LINK_TYPE_FIXED mode */
+		/* tx-disable-gpios = <&sfp3_csr 0 GPIO_ACTIVE_HIGH>; */
+		los-gpios = <&sfp3_csr 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfp3_csr 5 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfp3_csr 7 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &crypto {
@@ -170,6 +192,37 @@
 &i2c0 {
 	status = "okay";
 
+	cpld@66 {
+		compatible = "fsl,lx2160ardb-fpga";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sfp2_csr: gpio@19 {
+			compatible = "fsl,lx2160ardb-fpga-gpio-sfp";
+			reg = <0x19>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"SFP2_TX_EN", "",
+				"", "",
+				"SFP2_RX_LOS", "SFP2_TX_FAULT",
+				"", "SFP2_MOD_ABS";
+		};
+
+		sfp3_csr: gpio@1a {
+			compatible = "fsl,lx2160ardb-fpga-gpio-sfp";
+			reg = <0x1a>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"SFP3_TX_EN", "",
+				"", "",
+				"SFP3_RX_LOS", "SFP3_TX_FAULT",
+				"", "SFP3_MOD_ABS";
+		};
+	};
+
 	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
@@ -205,6 +258,31 @@
 				vcc-supply = <&sb_3v3>;
 			};
 		};
+
+		i2c@7 {
+			reg = <0x7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c-mux@75 {
+				compatible = "nxp,pca9547";
+				reg = <0x75>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sfp2_i2c: i2c@4 {
+					reg = <0x4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				sfp3_i2c: i2c@5 {
+					reg = <0x5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index c9541403bcd8..d899c0355e51 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1094,24 +1094,28 @@
 		};
 
 		usb0: usb@3100000 {
-			compatible = "snps,dwc3";
+			compatible = "fsl,lx2160a-dwc3", "fsl,ls1028a-dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			usb3-lpm-capable;
+			iommus = <&smmu 1>;
+			dma-coherent;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 			status = "disabled";
 		};
 
 		usb1: usb@3110000 {
-			compatible = "snps,dwc3";
+			compatible = "fsl,lx2160a-dwc3", "fsl,ls1028a-dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			usb3-lpm-capable;
+			iommus = <&smmu 2>;
+			dma-coherent;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
index 9f5ff1ffe7d5..7a595fddc027 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
@@ -6,7 +6,7 @@
 
 /dts-v1/;
 
-#include "fsl-lx2160a.dtsi"
+#include "fsl-lx2160a-rev2.dtsi"
 
 / {
 	model = "NXP Layerscape LX2162AQDS";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-pcie-ep.dtso b/arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso
index 244e820699b5..ed73284d9bb6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk-pcie-ep.dtso
+++ b/arch/arm64/boot/dts/freescale/imx-pcie0-ep.dtso
@@ -6,12 +6,10 @@
 /dts-v1/;
 /plugin/;
 
-&pcie {
+&pcie0 {
 	status = "disabled";
 };
 
-&pcie_ep {
-	pinctrl-0 = <&pinctrl_pcie0>;
-	pinctrl-names = "default";
+&pcie0_ep {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso b/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso
new file mode 100644
index 000000000000..0e7ef7ef8560
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx-pcie1-ep.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&pcie1 {
+	status = "disabled";
+};
+
+&pcie1_ep {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
index dc127298715b..06790255a764 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
@@ -104,9 +104,15 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
 
-/* TODO: Apalis BKL1_PWM */
+/* Apalis BKL1_PWM */
+&pwm_lvds1 {
+	status = "okay";
+};
 
 /* Apalis DAP1 */
 &sai1 {
@@ -121,7 +127,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis SATA1 */
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
 
 /* Apalis SPDIF1 */
 &spdif0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
index d4a1ad528f65..7022de46b8bf 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
@@ -191,9 +191,15 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
 
-/* TODO: Apalis BKL1_PWM */
+/* Apalis BKL1_PWM */
+&pwm_lvds1 {
+	status = "okay";
+};
 
 /* Apalis DAP1 */
 &sai1 {
@@ -208,7 +214,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis SATA1 */
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
 
 /* Apalis SPDIF1 */
 &spdif0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
index 5e132c83e1b2..12732ed7f811 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -240,9 +240,15 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	status = "okay";
+};
 
-/* TODO: Apalis BKL1_PWM */
+/* Apalis BKL1_PWM */
+&pwm_lvds1 {
+	status = "okay";
+};
 
 /* Apalis DAP1 */
 &sai1 {
@@ -257,7 +263,10 @@
 	status = "okay";
 };
 
-/* TODO: Apalis SATA1 */
+/* Apalis SATA1 */
+&sata {
+	status = "okay";
+};
 
 /* Apalis SPDIF1 */
 &spdif0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index a3fc945aea16..9153dddfd3b8 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -18,7 +18,7 @@
 		brightness-levels = <0 45 63 88 119 158 203 255>;
 		default-brightness-level = <4>;
 		enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */
-		/* TODO: hook-up to Apalis BKL1_PWM */
+		pwms = <&pwm_lvds1 0 6666667 PWM_POLARITY_INVERTED>;
 		status = "disabled";
 	};
 
@@ -31,12 +31,6 @@
 				      3000 1>;
 	};
 
-	/* TODO: LVDS Panel */
-
-	/* TODO: Shared PCIe/SATA Reference Clock */
-
-	/* TODO: PCIe Wi-Fi Reference Clock */
-
 	/*
 	 * Power management bus used to control LDO1OUT of the
 	 * second PMIC PF8100. This is used for controlling voltage levels of
@@ -83,8 +77,8 @@
 		gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
-		regulator-name = "wifi_pwrdn_fake_regulator";
-		regulator-settling-time-us = <100>;
+		regulator-name = "Wi-Fi_POWER_DOWN"; /* Wi-Fi module PDn */
+		startup-delay-us = <100>;
 	};
 
 	reg_pcie_switch: regulator-pcie-switch {
@@ -232,6 +226,34 @@
 		spdif-out;
 	};
 
+	thermal-zones {
+		pmic-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+			cooling-maps {
+				cooling_maps_map0: map0 {
+					trip = <&pmic_alert0>;
+				};
+			};
+
+			trips {
+				pmic_alert0: trip0 {
+					hysteresis = <2000>;
+					temperature = <110000>;
+					type = "passive";
+				};
+
+				pmic_crit0: trip1 {
+					hysteresis = <2000>;
+					temperature = <125000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	touchscreen: touchscreen {
 		compatible = "toradex,vf50-touchscreen";
 		interrupt-parent = <&lsio_gpio3>;
@@ -256,21 +278,21 @@
 };
 
 &asrc0 {
-	fsl,asrc-rate  = <48000>;
+	fsl,asrc-rate = <48000>;
 };
 
 &adc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc0>;
+	vref-supply = <&reg_vref_1v8>;
 };
 
 &adc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc1>;
+	vref-supply = <&reg_vref_1v8>;
 };
 
-/* TODO: Asynchronous Sample Rate Converter (ASRC) */
-
 &cpu_alert0 {
 	temperature = <95000>;
 };
@@ -339,6 +361,25 @@
 	pinctrl-0 = <&pinctrl_flexcan3>;
 };
 
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-pcieb-sata";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&hsio_refa_clk {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
+	enable-gpios = <&lsio_gpio4 11 GPIO_ACTIVE_HIGH>;
+};
+
+&hsio_refb_clk {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
+	clocks = <&hsio_refa_clk>;
+	enable-gpios = <&lsio_gpio2 11 GPIO_ACTIVE_HIGH>;
+};
+
 /* TODO: Apalis HDMI1 */
 
 &gpu_alert0 {
@@ -514,7 +555,10 @@
 			  "MXM3_112",
 			  "MXM3_118",
 			  "MXM3_114",
-			  "MXM3_116";
+			  "MXM3_116",
+			  "",
+			  "",
+			  "MXM3_26";
 };
 
 &lsio_gpio1 {
@@ -586,15 +630,6 @@
 			  "MXM3_183",
 			  "MXM3_185",
 			  "MXM3_187";
-
-	pcie-wifi-hog {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
-		gpio-hog;
-		gpios = <11 GPIO_ACTIVE_HIGH>;
-		line-name = "PCIE_WIFI_CLK";
-		output-high;
-	};
 };
 
 &lsio_gpio3 {
@@ -660,16 +695,6 @@
 			  "MXM3_291",
 			  "MXM3_289",
 			  "MXM3_287";
-
-	/* Enable pcie root / sata ref clock unconditionally */
-	pcie-sata-hog {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
-		gpio-hog;
-		gpios = <11 GPIO_ACTIVE_HIGH>;
-		line-name = "PCIE_SATA_CLK";
-		output-high;
-	};
 };
 
 &lsio_gpio5 {
@@ -771,11 +796,35 @@
 	status = "okay";
 };
 
-/* TODO: Apalis PCIE1 */
+/* Apalis PCIE1 */
+&pciea {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	reset-gpio = <&lsio_gpio0 30 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_switch>;
+};
+
+/* On-module Wi-Fi */
+&pcieb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcieb>, <&pinctrl_wifi>;
+	phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy";
+	reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
-/* TODO: On-module Wi-Fi */
+&phyx2_lpcg {
+	clocks = <&hsio_refa_clk>, <&hsio_refb_clk>,
+		 <&hsio_refa_clk>, <&hsio_per_clk>;
+};
 
-/* TODO: Apalis BKL1_PWM */
+&pwm_lvds1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_bkl>;
+};
 
 /* Apalis DAP1 */
 &sai1 {
@@ -790,7 +839,21 @@
 	status = "okay";
 };
 
-/* TODO: Apalis SATA1 */
+/* Apalis HDMI Audio */
+&sai5 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			  <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai5_lpcg 0>;
+	assigned-clock-parents = <&aud_pll_div0_lpcg 0>, <&aud_rec1_lpcg 0>;
+	assigned-clock-rates = <0>, <0>, <786432000>, <49152000>, <12288000>,
+			       <722534400>, <45158400>, <11289600>, <49152000>;
+};
 
 /* Apalis SPDIF1 */
 &spdif0 {
@@ -803,8 +866,6 @@
 	status = "okay";
 };
 
-/* TODO: Thermal Zones */
-
 /* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
 
 /* Apalis USBH4 */
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index a60ebb718789..5e4233ccfde4 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -165,7 +165,7 @@ audio_subsys: bus@59000000 {
 	};
 
 	esai0: esai@59010000 {
-		compatible = "fsl,imx8qm-esai";
+		compatible = "fsl,imx8qm-esai", "fsl,imx6ull-esai";
 		reg = <0x59010000 0x10000>;
 		interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&esai0_lpcg IMX_LPCG_CLK_4>,
@@ -296,7 +296,8 @@ audio_subsys: bus@59000000 {
 			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 20 unused */
 			     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, /* 21 */
 			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 22 unused */
-			     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; /* 23 unused */
+			     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, /* 23 unused */
+			     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
 				<&pd IMX_SC_R_DMA_0_CH1>,
 				<&pd IMX_SC_R_DMA_0_CH2>,
@@ -558,7 +559,8 @@ audio_subsys: bus@59000000 {
 			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 7 unused */
 			     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */
 			     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */
+			     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* sai5 */
+			     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
 				<&pd IMX_SC_R_DMA_1_CH1>,
 				<&pd IMX_SC_R_DMA_1_CH2>,
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index ce6ef160fd55..176e2e332f87 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -77,7 +77,11 @@ conn_subsys: bus@5b000000 {
 			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
 			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
+		assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <400000000>;
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
+		fsl,tuning-start-tap = <20>;
+		fsl,tuning-step = <2>;
 		status = "disabled";
 	};
 
@@ -88,6 +92,8 @@ conn_subsys: bus@5b000000 {
 			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
 			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
+		assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <200000000>;
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
 		fsl,tuning-step = <2>;
@@ -101,7 +107,11 @@ conn_subsys: bus@5b000000 {
 			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
 			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
+		assigned-clocks = <&clk IMX_SC_R_SDHC_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <200000000>;
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
+		fsl,tuning-start-tap = <20>;
+		fsl,tuning-step = <2>;
 		status = "disabled";
 	};
 
@@ -114,8 +124,9 @@ conn_subsys: bus@5b000000 {
 		clocks = <&enet0_lpcg IMX_LPCG_CLK_4>,
 			 <&enet0_lpcg IMX_LPCG_CLK_2>,
 			 <&enet0_lpcg IMX_LPCG_CLK_3>,
-			 <&enet0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+			 <&enet0_lpcg IMX_LPCG_CLK_0>,
+			 <&enet0_lpcg IMX_LPCG_CLK_1>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp", "enet_2x_txclk";
 		assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
 				  <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
 		assigned-clock-rates = <250000000>, <125000000>;
@@ -134,8 +145,9 @@ conn_subsys: bus@5b000000 {
 		clocks = <&enet1_lpcg IMX_LPCG_CLK_4>,
 			 <&enet1_lpcg IMX_LPCG_CLK_2>,
 			 <&enet1_lpcg IMX_LPCG_CLK_3>,
-			 <&enet1_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+			 <&enet1_lpcg IMX_LPCG_CLK_0>,
+			 <&enet0_lpcg IMX_LPCG_CLK_1>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp", "enet_2x_txclk";
 		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
 				  <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>;
 		assigned-clock-rates = <250000000>, <125000000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 575be8115e42..4de78f870c05 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -182,7 +182,8 @@ dma_subsys: bus@5a000000 {
 			     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
 				<&pd IMX_SC_R_DMA_2_CH1>,
 				<&pd IMX_SC_R_DMA_2_CH2>,
@@ -466,7 +467,8 @@ dma_subsys: bus@5a000000 {
 			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
 				<&pd IMX_SC_R_DMA_3_CH1>,
 				<&pd IMX_SC_R_DMA_3_CH2>,
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
index 70a8aa1a6791..469de8b536b5 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
@@ -57,8 +57,9 @@ hsio_subsys: bus@5f000000 {
 		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
 			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
 		#interrupt-cells = <1>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi", "dma";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
@@ -67,10 +68,10 @@ hsio_subsys: bus@5f000000 {
 		clock-names = "dbi", "mstr", "slv";
 		bus-range = <0x00 0xff>;
 		device_type = "pci";
-		interrupt-map = <0 0 0 1 &gic 0 105 4>,
-				 <0 0 0 2 &gic 0 106 4>,
-				 <0 0 0 3 &gic 0 107 4>,
-				 <0 0 0 4 &gic 0 108 4>;
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-map-mask = <0 0 0 0x7>;
 		num-lanes = <1>;
 		num-viewport = <4>;
@@ -79,6 +80,25 @@ hsio_subsys: bus@5f000000 {
 		status = "disabled";
 	};
 
+	pcieb_ep: pcie-ep@5f010000 {
+		compatible = "fsl,imx8q-pcie-ep";
+		reg = <0x5f010000 0x00010000>,
+		      <0x80000000 0x10000000>;
+		reg-names = "dbi", "addr_space";
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dma";
+		clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_4>,
+			 <&pcieb_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		power-domains = <&pd IMX_SC_R_PCIE_B>;
+		fsl,max-link-speed = <3>;
+		num-ib-windows = <6>;
+		num-ob-windows = <6>;
+		status = "disabled";
+	};
+
 	pcieb_lpcg: clock-controller@5f060000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5f060000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
index d39242c1b9f7..a72b2f1c4a1b 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -10,12 +10,262 @@ img_ipg_clk: clock-img-ipg {
 	clock-output-names = "img_ipg_clk";
 };
 
+img_pxl_clk: clock-img-pxl {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <600000000>;
+	clock-output-names = "img_pxl_clk";
+};
+
 img_subsys: bus@58000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x58000000 0x0 0x58000000 0x1000000>;
 
+	isi: isi@58100000 {
+		reg = <0x58100000 0x80000>;
+		interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma5_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma6_lpcg IMX_LPCG_CLK_0>,
+			 <&pdma7_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "per0", "per1", "per2", "per3",
+			      "per4", "per5", "per6", "per7";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_ISI_CH0>,
+				<&pd IMX_SC_R_ISI_CH1>,
+				<&pd IMX_SC_R_ISI_CH2>,
+				<&pd IMX_SC_R_ISI_CH3>,
+				<&pd IMX_SC_R_ISI_CH4>,
+				<&pd IMX_SC_R_ISI_CH5>,
+				<&pd IMX_SC_R_ISI_CH6>,
+				<&pd IMX_SC_R_ISI_CH7>;
+		status = "disabled";
+	};
+
+	irqsteer_csi0: irqsteer@58220000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x58220000 0x1000>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_ipg_clk>;
+		clock-names = "ipg";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_CSI_0>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	gpio0_mipi_csi0: gpio@58222000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x58222000 0x1000>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&irqsteer_csi0>;
+		power-domains = <&pd IMX_SC_R_CSI_0>;
+	};
+
+	csi0_core_lpcg: clock-controller@58223018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58223018 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi0_lpcg_core_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	csi0_esc_lpcg: clock-controller@5822301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5822301c 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_MISC>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi0_lpcg_esc_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	i2c_mipi_csi0: i2c@58226000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x58226000 0x1000>;
+		interrupts = <8>;
+		clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&img_ipg_clk>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		interrupt-parent = <&irqsteer_csi0>;
+		power-domains = <&pd IMX_SC_R_CSI_0_I2C_0>;
+		status = "disabled";
+	};
+
+	mipi_csi_0: csi@58227000 {
+		compatible = "fsl,imx8qxp-mipi-csi2";
+		reg = <0x58227000 0x1000>,
+		      <0x58221000 0x1000>;
+		clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+			 <&csi0_esc_lpcg IMX_LPCG_CLK_4>,
+			 <&csi0_pxl_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "core", "esc", "ui";
+		assigned-clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+				  <&csi0_esc_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <360000000>, <72000000>;
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+		resets = <&scu_reset IMX_SC_R_CSI_0>;
+		status = "disabled";
+	};
+
+	irqsteer_csi1: irqsteer@58240000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x58240000 0x1000>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_ipg_clk>;
+		clock-names = "ipg";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_CSI_1>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+	};
+
+	gpio0_mipi_csi1: gpio@58242000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x58242000 0x1000>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&irqsteer_csi1>;
+		power-domains = <&pd IMX_SC_R_CSI_1>;
+	};
+
+	csi1_core_lpcg: clock-controller@58243018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58243018 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi1_lpcg_core_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	csi1_esc_lpcg: clock-controller@5824301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5824301c 0x4>;
+		clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_MISC>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "csi1_lpcg_esc_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	i2c_mipi_csi1: i2c@58246000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x58246000 0x1000>;
+		interrupts = <8>;
+		clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&img_ipg_clk>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		interrupt-parent = <&irqsteer_csi1>;
+		power-domains = <&pd IMX_SC_R_CSI_1_I2C_0>;
+		status = "disabled";
+	};
+
+	mipi_csi_1: csi@58247000 {
+		compatible = "fsl,imx8qxp-mipi-csi2";
+		reg = <0x58247000 0x1000>,
+		      <0x58241000 0x1000>;
+		clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+			 <&csi1_esc_lpcg IMX_LPCG_CLK_4>,
+			 <&csi1_pxl_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "core", "esc", "ui";
+		assigned-clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+				  <&csi1_esc_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <360000000>, <72000000>;
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+		resets = <&scu_reset IMX_SC_R_CSI_1>;
+		status = "disabled";
+	};
+
+	irqsteer_parallel: irqsteer@58260000 {
+		compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+		reg = <0x58260000 0x1000>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_dummy>;
+		clock-names = "ipg";
+		interrupt-parent = <&gic>;
+		power-domains = <&pd IMX_SC_R_PI_0>;
+		fsl,channel = <0>;
+		fsl,num-irqs = <32>;
+		status = "disabled";
+	};
+
+	pi0_ipg_lpcg: clock-controller@58263004 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58263004 0x4>;
+		clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "pi0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	pi0_pxl_lpcg: clock-controller@58263018 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58263018 0x4>;
+		clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pi0_lpcg_pxl_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	pi0_misc_lpcg: clock-controller@5826301c {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5826301c 0x4>;
+		clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_MISC0>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pi0_lpcg_misc_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	i2c0_parallel: i2c@58266000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x58266000 0x1000>;
+		interrupts = <8>;
+		clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&img_ipg_clk>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		interrupt-parent = <&irqsteer_parallel>;
+		power-domains = <&pd IMX_SC_R_PI_0_I2C_0>;
+		status = "disabled";
+	};
+
 	jpegdec: jpegdec@58400000 {
 		reg = <0x58400000 0x00050000>;
 		interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
@@ -40,6 +290,116 @@ img_subsys: bus@58000000 {
 				<&pd IMX_SC_R_MJPEG_ENC_S0>;
 	};
 
+	pdma0_lpcg: clock-controller@58500000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58500000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH0>;
+	};
+
+	pdma1_lpcg: clock-controller@58510000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58510000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH1>;
+	};
+
+	pdma2_lpcg: clock-controller@58520000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58520000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma2_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH2>;
+	};
+
+	pdma3_lpcg: clock-controller@58530000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58530000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma3_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH3>;
+	};
+
+	pdma4_lpcg: clock-controller@58540000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58540000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma4_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH4>;
+	};
+
+	pdma5_lpcg: clock-controller@58550000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58550000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma5_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH5>;
+	};
+
+	pdma6_lpcg: clock-controller@58560000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58560000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma6_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH6>;
+	};
+
+	pdma7_lpcg: clock-controller@58570000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58570000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "pdma7_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_ISI_CH7>;
+	};
+
+	csi0_pxl_lpcg: clock-controller@58580000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58580000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "csi0_lpcg_pxl_clk";
+		power-domains = <&pd IMX_SC_R_CSI_0>;
+	};
+
+	csi1_pxl_lpcg: clock-controller@58590000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x58590000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "csi1_lpcg_pxl_clk";
+		power-domains = <&pd IMX_SC_R_CSI_1>;
+	};
+
+	hdmi_rx_pxl_link_lpcg: clock-controller@585a0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585a0000 0x10000>;
+		clocks = <&img_pxl_clk>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "hdmi_rx_lpcg_pxl_link_clk";
+		power-domains = <&pd IMX_SC_R_HDMI_RX>;
+	};
+
 	img_jpeg_dec_lpcg: clock-controller@585d0000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x585d0000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi
new file mode 100644
index 000000000000..3e04142aca5c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+security_subsys: bus@31400000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x31400000 0x0 0x31400000 0x90000>;
+
+	crypto: crypto@31400000 {
+		compatible = "fsl,imx8qm-caam", "fsl,sec-v4.0";
+		reg = <0x31400000 0x90000>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x31400000 0x90000>;
+		power-domains = <&pd IMX_SC_R_CAAM_JR2>;
+		fsl,sec-era = <9>;
+
+		sec_jr2: jr@30000 {
+			compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring";
+			reg = <0x30000 0x10000>;
+			interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd IMX_SC_R_CAAM_JR2>;
+		};
+
+		sec_jr3: jr@40000 {
+			compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring";
+			reg = <0x40000 0x10000>;
+			interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd IMX_SC_R_CAAM_JR3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 6259186cd4d9..5c68d33e19f2 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -191,6 +191,33 @@
 		enable-active-high;
 	};
 
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	bt_sco_codec: audio-codec-bt {
 		compatible = "linux,bt-sco";
 		#sound-dai-cells = <1>;
@@ -420,6 +447,11 @@
 				wlf,shared-lrclk;
 				wlf,hp-cfg = <2 2 3>;
 				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
 			};
 		};
 
@@ -444,6 +476,11 @@
 				wlf,shared-lrclk;
 				wlf,hp-cfg = <2 2 3>;
 				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
 			};
 		};
 
@@ -468,6 +505,11 @@
 				wlf,shared-lrclk;
 				wlf,hp-cfg = <2 2 3>;
 				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
 			};
 		};
 
@@ -556,6 +598,10 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart1>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
 };
 
 &lsio_mu5 {
@@ -600,16 +646,27 @@
 	status = "okay";
 };
 
-&pcieb {
+&pcie0 {
 	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pcieb>;
 	pinctrl-names = "default";
 	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcieb>;
+	vpcie3v3aux-supply = <&reg_pcieb>;
 	status = "okay";
 };
 
+&pcie0_ep {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	status = "disabled";
+};
+
 &sai0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai0>;
@@ -723,8 +780,10 @@
 };
 
 &usdhc1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
 	bus-width = <8>;
 	no-sd;
 	no-sdio;
@@ -733,12 +792,15 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
+	max-frequency = <100000000>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
index 72434529f78e..7a191195dbd9 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
@@ -101,7 +101,8 @@
 		<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, /* gpt0 */
 		<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* gpt1 */
 		<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* gpt2 */
-		<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; /* gpt3 */
+		<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, /* gpt3 */
+		<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
 	power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
 			<&pd IMX_SC_R_DMA_0_CH1>,
 			<&pd IMX_SC_R_DMA_0_CH2>,
@@ -145,7 +146,8 @@
 		     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>;
+		     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &edma3 {
@@ -156,7 +158,8 @@
 		     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
+		     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &flexcan1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index 9b114bed084b..74f9ce493248 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -5,6 +5,9 @@
 
 /delete-node/ &enet1_lpcg;
 /delete-node/ &fec2;
+/delete-node/ &usbotg3;
+/delete-node/ &usb3_phy;
+/delete-node/ &usb3_lpcg;
 
 / {
 	conn_enet0_root_clk: clock-conn-enet0-root {
@@ -27,8 +30,8 @@
 		compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
 		reg = <0x5b050000 0x10000>;
 		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "macirq", "eth_wake_irq";
 		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
 			 <&eqos_lpcg IMX_LPCG_CLK_6>,
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
index afbe962d78ce..5c0d09c5c086 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
@@ -37,15 +37,25 @@
 		power-domains = <&pd IMX_SC_R_SERDES_1>;
 		status = "disabled";
 	};
+
+	pcie0: pcie@5f010000 {
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0 0 0 0x7>;
+	};
+
+	pcie0_ep: pcie-ep@5f010000 {
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dma";
+	};
 };
 
-&pcieb {
-	#interrupt-cells = <1>;
-	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "msi";
-	interrupt-map = <0 0 0 1 &gic 0 47 4>,
-			 <0 0 0 2 &gic 0 48 4>,
-			 <0 0 0 3 &gic 0 49 4>,
-			 <0 0 0 4 &gic 0 50 4>;
-	interrupt-map-mask = <0 0 0 0x7>;
+&pcieb_ep {
+	interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "dma";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index a71d8b32c192..8d60827822ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -92,6 +92,7 @@
 		compatible = "arm,gic-v3";
 		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
 		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts
new file mode 100644
index 000000000000..331787df2fe4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps-mb-smarc-2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8dxp-tqma8xdps.dtsi"
+#include "tqma8xxs-mb-smarc-2.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDPS on MB-SMARC-2";
+	compatible = "tq,imx8dxp-tqma8xdps-mb-smarc-2", "tq,imx8dxp-tqma8xdps", "fsl,imx8dxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi
new file mode 100644
index 000000000000..a97286fe7e0d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdps.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8dxp.dtsi"
+#include "tqma8xxs.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDPS";
+	compatible = "tq,imx8dxp-tqma8xdps", "fsl,imx8dxp";
+};
+
+&pmic0_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
index 97ff1ddd6318..734a75198f06 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -124,6 +124,7 @@
 	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 62ed64663f49..8287a7f66ed3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -78,6 +78,9 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -233,6 +236,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -269,7 +278,7 @@
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
@@ -285,6 +294,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -314,6 +325,7 @@
 			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
 			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10             0x146
 			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
 		>;
 	};
@@ -349,6 +361,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x146
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
index 90e638b8e92a..87fe3ebedb8d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
@@ -333,7 +333,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp{
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         	0x194
 			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         	0x1d4
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 5f8336217bb8..6eab8a6001db 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -147,6 +147,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&cpudai>;
 		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,widgets =
 			"Line", "Left Line Out Jack",
 			"Line", "Right Line Out Jack";
@@ -158,11 +159,11 @@
 			sound-dai = <&sai3>;
 			dai-tdm-slot-num = <2>;
 			dai-tdm-slot-width = <32>;
+			system-clock-direction-out;
 		};
 
 		simple-audio-card,codec {
 			sound-dai = <&wm8524>;
-			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
 		};
 	};
 
@@ -541,9 +542,23 @@
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
 				 <&clk IMX8MM_SYS_PLL2_250M>;
 	vpcie-supply = <&reg_pcie0>;
+	supports-clkreq;
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "disabled";
+};
+
 &sai2 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -557,9 +572,17 @@
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
-	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
-	assigned-clock-rates = <24576000>;
+	assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>,
+			  <&clk IMX8MM_AUDIO_PLL2>,
+			  <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <393216000>, <361267200>, <24576000>;
+	fsl,sai-mclk-direction-output;
+	clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso
new file mode 100644
index 000000000000..324004b0eca3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2025 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-user {
+			label = "user";
+			linux,code = <BTN_0>;
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led_lte>;
+
+		lte-led1-b {
+			label = "lte-led1-blue";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led1-g {
+			label = "lte-led1-green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led1-r {
+			label = "lte-led1-red";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-b {
+			label = "lte-led2-blue";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-g {
+			label = "lte-led2-green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-r {
+			label = "lte-led2-red";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ecspi3 {
+	status = "disabled";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	tpm@2e {
+		compatible = "infineon,slb9673", "tcg,tpm-tis-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reg = <0x2e>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "VDD_IO_REF", "TPM_PIRQ#",
+			  "TPM_RESET# ", "", "", "",
+			  "", "LTE_LED1_B", "LTE_LED1_G", "",
+			  "";
+
+	vdd-io-ref-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		line-name = "VDD_IO_REF";
+		output-high;
+	};
+
+	tpm-reset-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		line-name = "TPM_RESET#";
+		output-low;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "", "", "LTE_RESET", "",
+			  "", "", "", "",
+			  "", "", "", "LTE_PWRKEY",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "LTE_PWR_EN";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "LTE_LED2_G", "LTE_LED1_R",
+			  "LTE_LED2_R", "LTE_LED2_B";
+};
+
+&iomuxc {
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10		0x19 /* VDD_IO_REF */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x19 /* LTE_RESET */
+			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 		0x19 /* LTE_PWRKEY */
+			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x19 /* LTE_PWR_EN */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x19 /* Pushbutton */
+		>;
+	};
+
+	pinctrl_gpio_led_lte: gpioledltegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17		0x19 /* LTE_LED1_B */
+			MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18		0x19 /* LTE_LED1_G */
+			MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23		0x19 /* LTE_LED1_R */
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19 /* LTE_LED2_B */
+			MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22		0x19 /* LTE_LED2_G */
+			MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24		0x19 /* LTE_LED2_R */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083 /* I2C_A_SCL */
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11		0x19 /* TPM_PIRQ# */
+			MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12		0x39 /* TPM_RESET# */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 33f8d7d1970e..3a166cf0afcb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -48,14 +48,6 @@
 		pwms = <&pwm2 0 5000 0>;
 	};
 
-	reg_rst_eth2: regulator-rst-eth2 {
-		compatible = "regulator-fixed";
-		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-name = "rst-usb-eth2";
-	};
-
 	reg_vdd_5v: regulator-5v {
 		compatible = "regulator-fixed";
 		regulator-always-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index a8ef4fba16a9..e756fe5db56b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -254,6 +254,10 @@
 	status = "okay";
 };
 
+&reg_nvcc_sd {
+	sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -264,8 +268,16 @@
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
+	/*
+	 * During bootup the CTS needs to stay LOW, which is only possible if this
+	 * pin is controlled by a GPIO. The UART IP always sets CTS to HIGH if not
+	 * running. So using 'uart-has-rtscts' is not a good choice here! There are
+	 * workarounds for this, but they introduce unnecessary complexity and are
+	 * therefore avoided here. For more information about this see:
+	 * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=79d0224f6bf296d04cd843cfc49921b19c97bb09
+	 */
+	rts-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 	linux,rs485-enabled-at-boot-time;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -435,7 +447,7 @@
 			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
 			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
 			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19
 		>;
 	};
 
@@ -454,7 +466,7 @@
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
 		>;
 	};
 
@@ -467,7 +479,7 @@
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
 		>;
 	};
 
@@ -480,7 +492,7 @@
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
 			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000d0
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
index 1db27731b581..57d0739fcce3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
@@ -107,7 +107,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	touchscreen@5d {
+	gt911: touchscreen@5d {
 		compatible = "goodix,gt928";
 		reg = <0x5d>;
 		pinctrl-names = "default";
@@ -117,6 +117,17 @@
 		reset-gpios = <&gpio3 23 0>;
 		irq-gpios = <&gpio3 22 0>;
 	};
+
+	st1633: touchscreen@55 {
+		compatible = "sitronix,st1633";
+		reg = <0x55>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <22 8>;
+		interrupt-parent = <&gpio3>;
+		gpios = <&gpio3 22 0>;
+		status = "disabled";
+	};
 };
 
 &lvds {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 663ae52b4852..96987910609f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -30,29 +30,6 @@
 		stdout-path = &uart3;
 	};
 
-	reg_vdd_carrier: regulator-vdd-carrier {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
-		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-name = "VDD_CARRIER";
-
-		regulator-state-standby {
-			regulator-on-in-suspend;
-		};
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-
-		regulator-state-disk {
-			regulator-off-in-suspend;
-		};
-	};
-
 	reg_usb1_vbus: regulator-usb1-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -61,7 +38,7 @@
 		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-name = "VBUS_USB1";
+		regulator-name = "VBUS_USB_A";
 	};
 
 	reg_usb2_vbus: regulator-usb2-vbus {
@@ -72,7 +49,7 @@
 		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-name = "VBUS_USB2";
+		regulator-name = "VBUS_USB_B";
 	};
 
 	reg_usdhc2_vcc: regulator-usdhc2-vcc {
@@ -96,6 +73,29 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "VCC_SDIO_B";
 	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
 };
 
 &A53_0 {
@@ -342,6 +342,7 @@
 				regulator-name = "NVCC_SD (LDO5)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
+				sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			};
 		};
 	};
@@ -794,7 +795,7 @@
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
 			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
 		>;
 	};
 
@@ -807,7 +808,7 @@
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
 			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
 		>;
 	};
 
@@ -820,7 +821,7 @@
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
 			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x40000090
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
index 75bbedc6164c..a134b1833649 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
@@ -82,7 +82,7 @@
 	};
 
 	panel {
-		compatible = "panel-lvds";
+		compatible = "auo,g084sn05", "panel-lvds";
 		width-mm = <170>;
 		height-mm = <28>;
 		data-mapping = "jeida-18";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtso
new file mode 100644
index 000000000000..193fa9dc34d4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-phyboard-polis-peb-av-10.dtsi"
+
+&backlight {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	pwms = <&pwm4 0 50000 0>;
+	status = "okay";
+};
+
+&bridge_out {
+	ti,lvds-vod-swing-clock-microvolt = <200000 600000>;
+	ti,lvds-vod-swing-data-microvolt = <200000 600000>;
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+};
+
+&panel {
+	compatible = "edt,etml1010g3dra";
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&sn65dsi83 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtso
new file mode 100644
index 000000000000..fd819bd563b8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-phyboard-polis-peb-av-10.dtsi"
+
+&backlight {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	pwms = <&pwm4 0 50000 0>;
+	status = "okay";
+};
+
+&bridge_out {
+	ti,lvds-vod-swing-clock-microvolt = <200000 600000>;
+	ti,lvds-vod-swing-data-microvolt = <200000 600000>;
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+};
+
+&panel {
+	compatible = "powertip,ph128800t006-zhc01";
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&sn65dsi83 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtsi
new file mode 100644
index 000000000000..bd1f255e15ea
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		power-supply = <&reg_vdd_3v3_s>;
+		status = "disabled";
+	};
+
+	panel: panel {
+		backlight = <&backlight>;
+		power-supply = <&reg_vcc_3v3>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	reg_sound_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_Audio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_sound_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_Analog";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound-peb-av-10 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "snd-peb-av-10";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <32>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Speaker", "Speaker",
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"MIC3R", "Microphone Jack",
+			"Microphone Jack", "Mic Bias";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clk IMX8MM_CLK_SAI5>;
+		};
+	};
+};
+
+&bridge_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	codec: codec@18 {
+		compatible = "ti,tlv320aic3007";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tlv320>;
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+		ai3x-gpio-func = <0xd 0x0>;
+		ai3x-micbias-vg = <2>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x57>;
+		vcc-supply = <&reg_vdd_3v3_s>;
+	};
+
+	eeprom@5f {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x5f>;
+		size = <32>;
+		vcc-supply = <&reg_vdd_3v3_s>;
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&sai5 {
+	assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	assigned-clock-rates = <11289600>;
+	clocks = <&clk IMX8MM_CLK_SAI5_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI5_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k",
+			"pll11k";
+	fsl,sai-mclk-direction-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL          0x400001c2
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA          0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18        0x1e2
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19        0x1e2
+		>;
+	};
+	pinctrl_lcd: lcd0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1		0x12
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT		0x12
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK        0xd6
+			MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0    0xd6
+			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK     0xd6
+			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0    0xd6
+		>;
+	};
+
+	pinctrl_tlv320: tlv320grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28       0x116
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20        0x16
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
new file mode 100644
index 000000000000..28e8589f9f95
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "imx8mm-phyboard-polis-peb-av-10.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso
new file mode 100644
index 000000000000..1059c26990fe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-0 {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+
+		user-led1 {
+			gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led3 {
+			gpios = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17	0x16
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x16
+		>;
+	};
+
+	pinctrl_user_leds: user_ledsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15	0x16
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x16
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x16
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
index 5eacbd9611ee..6043e7d16306 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -1,7 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
  * Copyright (C) 2022 PHYTEC Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
  */
 
 /dts-v1/;
@@ -219,9 +218,15 @@
 	status = "okay";
 };
 
+/* RTC */
 &rv3028 {
+	interrupt-parent = <&gpio1>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-0 = <&pinctrl_rtc>;
+	pinctrl-names = "default";
 	aux-voltage-chargeable = <1>;
 	trickle-resistor-ohms = <3000>;
+	wakeup-source;
 };
 
 &snvs_pwrkey {
@@ -255,11 +260,12 @@
 		device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 		interrupt-names = "host-wakeup";
 		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_EDGE_BOTH>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		max-speed = <2000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_bt>;
 		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_vcc_3v3>;
 		vddio-supply = <&reg_vcc_3v3>;
 	};
 };
@@ -278,6 +284,8 @@
 	over-current-active-low;
 	samsung,picophy-pre-emp-curr-control = <3>;
 	samsung,picophy-dc-vol-level-adjust = <7>;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	pinctrl-names = "default";
 	srp-disable;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
@@ -332,7 +340,7 @@
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x00
 			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x00
-			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x00
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x140
 		>;
 	};
 
@@ -408,6 +416,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
+		>;
+	};
+
 	pinctrl_tpm: tpmgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11      0x140
@@ -445,6 +459,12 @@
 		>;
 	};
 
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x00
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x182
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-eth.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-eth.dtso
new file mode 100644
index 000000000000..0fb4b6da6c10
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-eth.dtso
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&ethphy0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-spiflash.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-spiflash.dtso
new file mode 100644
index 000000000000..7bfc366c1689
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-no-spiflash.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&flexspi {
+	status = "disabled";
+};
+
+&som_flash {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-rpmsg.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phycore-rpmsg.dtso
new file mode 100644
index 000000000000..43d5905f3d72
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-rpmsg.dtso
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Dominik Haller <d.haller@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+
+&{/} {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		m4_reserved: m4@80000000 {
+			reg = <0 0x80000000 0 0x1000000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@b8000000 {
+			reg = <0 0xb8000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@b8008000 {
+			reg = <0 0xb8008000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc_table@b80ff000 {
+			reg = <0 0xb80ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@b8400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xb8400000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	core-m4 {
+		compatible = "fsl,imx8mm-cm4";
+		clocks = <&clk IMX8MM_CLK_M4_DIV>;
+		mboxes = <&mu 0 1
+			&mu 1 1
+			&mu 3 1>;
+		mbox-names = "tx", "rx", "rxdb";
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>;
+		syscon = <&src>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
index 6069678244f3..3d66c6701342 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -1,7 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
  * Copyright (C) 2022 PHYTEC Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
  */
 
 #include "imx8mm.dtsi"
@@ -69,7 +68,6 @@
 
 /* Ethernet */
 &fec1 {
-	fsl,magic-packet;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	pinctrl-names = "default";
@@ -161,11 +159,13 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-max-microvolt = <2500000>;
-				regulator-min-microvolt = <1500000>;
+				regulator-min-microvolt = <2500000>;
 				regulator-name = "VCC_ENET_2V5 (LDO3)";
 
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <2500000>;
+					regulator-suspend-min-microvolt = <2500000>;
 				};
 			};
 
@@ -285,9 +285,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sn65dsi83>;
 		reg = <0x2d>;
+		vcc-supply = <&reg_vdd_1v8>;
 		status = "disabled";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in: endpoint {
+					remote-endpoint = <&mipi_dsi_out>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				bridge_out: endpoint {};
+			};
+		};
 	};
 
+	/* EEPROM */
 	eeprom@51 {
 		compatible = "atmel,24c32";
 		pagesize = <32>;
@@ -295,17 +314,22 @@
 		vcc-supply = <&reg_vdd_3v3_s>;
 	};
 
+	/* RTC */
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
 		reg = <0x52>;
 	};
 };
 
-/* EMMC */
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+};
+
+&mipi_dsi_out {
+	remote-endpoint = <&bridge_in>;
+};
+
+/* eMMC */
 &usdhc3 {
 	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
 	assigned-clock-rates = <400000000>;
@@ -340,10 +364,10 @@
 			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
 			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x16
 			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x16
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x16
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x16
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x16
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x16
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x12
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x12
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x12
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x12
 			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x10
 		>;
 	};
@@ -373,12 +397,6 @@
 		>;
 	};
 
-	pinctrl_rtc: rtcgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
-		>;
-	};
-
 	pinctrl_sn65dsi83: sn65dsi83grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
index c3835b2d860a..2ecc8b3c67da 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
@@ -215,8 +215,13 @@
 
 /* RTC */
 &rv3028 {
+	interrupt-parent = <&gpio1>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-0 = <&pinctrl_rtc>;
+	pinctrl-names = "default";
 	aux-voltage-chargeable = <1>;
 	trickle-resistor-ohms = <3000>;
+	wakeup-source;
 };
 
 &uart1 {
@@ -394,6 +399,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
+		>;
+	};
+
 	pinctrl_tempsense: tempsensegrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x00
@@ -441,7 +452,7 @@
 
 	pinctrl_usbotg1: usbotg1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x80
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x00
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
index 8f58c84e14c8..b82e9790ea20 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -65,6 +65,7 @@
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5_reg>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index cdfacbc35db5..190bde4edcd7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -306,7 +306,7 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index 5a3b1142ddf4..dca213c85cc3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -115,6 +115,7 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
@@ -418,6 +419,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -443,7 +446,7 @@
 			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
 			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
 			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x0
 			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
 			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 752caa38eb03..266038fbbef9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -351,17 +351,6 @@
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
-			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
-			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
-			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
-			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
-			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
-		>;
-	};
-
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index d8b67e12f7d7..272c2b223d16 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -833,6 +833,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 46d1ee0a4ee8..468c7e993c52 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -253,6 +253,7 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
@@ -743,6 +744,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index c0aadff4e25b..636daa3d6ca2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -621,6 +621,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
index 86a610de84fe..99572961d9e1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
@@ -682,6 +682,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
index ce20de259805..3d0b14968131 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -16,10 +16,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index c528594ac442..1594ce9182a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -18,20 +18,6 @@
 		rtc1 = &snvs_rtc;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 45 63 88 119 158 203 255>;
-		default-brightness-level = <4>;
-		/* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */
-		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>;
-		power-supply = <&reg_3p3v>;
-		/* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */
-		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
-		status = "disabled";
-	};
-
 	/* Fixed clock dedicated to SPI CAN controller */
 	clk40m: oscillator {
 		compatible = "fixed-clock";
@@ -66,13 +52,6 @@
 		status = "disabled";
 	};
 
-	panel_lvds: panel-lvds {
-		compatible = "panel-lvds";
-		backlight = <&backlight>;
-		data-mapping = "vesa-24";
-		status = "disabled";
-	};
-
 	/* Carrier Board Supplies */
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
@@ -165,6 +144,19 @@
 		startup-delay-us = <20000>;
 	};
 
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_USDHC_VSELECT";
+		vin-supply = <&reg_nvcc_sd>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -290,7 +282,7 @@
 			  "SODIMM_19",
 			  "",
 			  "",
-			  "",
+			  "PMIC_USDHC_VSELECT",
 			  "",
 			  "",
 			  "",
@@ -472,6 +464,7 @@
 			};
 
 			reg_nvcc_sd: LDO5 {
+				regulator-always-on;
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
@@ -549,7 +542,7 @@
 	};
 
 	eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
@@ -654,7 +647,7 @@
 
 	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
 	eeprom_display_adapter: eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 		status = "disabled";
@@ -662,7 +655,7 @@
 
 	/* EEPROM on carrier board */
 	eeprom_carrier_board: eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x57>;
 		status = "disabled";
@@ -806,6 +799,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
 };
 
 &wdog1 {
@@ -1227,13 +1221,17 @@
 			<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x6>;	/* SODIMM 76 */
 	};
 
+	pinctrl_usdhc2_vsel: usdhc2vselgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4	0x10>; /* PMIC_USDHC_VSELECT */
+	};
+
 	/*
 	 * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the
 	 * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here.
 	 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x90>,	/* SODIMM 78 */
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x90>,	/* SODIMM 74 */
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x90>,	/* SODIMM 80 */
@@ -1244,7 +1242,6 @@
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x94>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x94>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x94>,
@@ -1255,7 +1252,6 @@
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x96>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x96>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x96>,
@@ -1267,7 +1263,6 @@
 	/* Avoid backfeeding with removed card power */
 	pinctrl_usdhc2_sleep: usdhc2slpgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x0>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x0>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x0>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 4de3bf22902b..fc3cd639310e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -62,7 +62,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,7 +82,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -102,7 +100,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -121,7 +118,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -919,6 +915,8 @@
 					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
 						 <&clk IMX8MM_CLK_UART2_ROOT>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
@@ -1469,6 +1467,7 @@
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>, /* GIC Dist */
 			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
index 1df5ceb11387..37fc5ed98d7f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -124,6 +124,7 @@
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 2a64115eebf1..917b7d0007a7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -88,6 +88,9 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -242,6 +245,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -280,7 +289,7 @@
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		pinctrl-names = "default";
@@ -296,6 +305,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -325,6 +336,7 @@
 			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
 			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10             0x146
 			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
 		>;
 	};
@@ -360,6 +372,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x146
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index bbb07c650da9..d20393c2d901 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -265,7 +265,7 @@
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		compatible = "brcm,bcm4329-fmac";
 		reg = <1>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
index 7675583a6b67..98dec3c42060 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
@@ -4,6 +4,34 @@
  */
 
 / {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer-panel0 {
+			compatible = "simple-framebuffer";
+			clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, /* lcdif */
+				 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+				 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+				 <&clk IMX8MN_VIDEO_PLL1>,
+				 <&clk IMX8MN_CLK_DISP_AXI_ROOT>, /* pgc_dispmix */
+				 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+				 <&clk IMX8MN_CLK_DISP_AXI>,
+				 <&clk IMX8MN_CLK_DISP_APB>,
+				 <&clk IMX8MN_SYS_PLL2_1000M>,
+				 <&clk IMX8MN_SYS_PLL1_800M>,
+				 <&clk IMX8MN_CLK_DSI_CORE>, /* mipi_disi */
+				 <&clk IMX8MN_CLK_DSI_PHY_REF>;
+
+			power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>,
+					<&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
+			dvdd-supply = <&reg_3v3_dvdd>;
+			avdd-supply = <&reg_v3v3_avdd>;
+			status = "disabled";
+		};
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
index c6ad65becc97..475cbf9e0d1e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
@@ -64,7 +64,6 @@
 		DVDD-supply = <&buck5_reg>;
 		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		ai31xx-micbias-vg = <MICBIAS_AVDDV>;
-		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 33d73f3dc187..145355ff91b4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -387,6 +387,11 @@
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	fsl,sai-mclk-direction-output;
+	clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>,
+		<&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>,
+		<&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>,
+		<&clk IMX8MN_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
index dc94d73f7106..d7f7f9aafb7d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -79,6 +79,10 @@
 		 <&clk IMX8MN_AUDIO_PLL2_OUT>;
 };
 
+&sound {
+	audio-asrc = <&easrc>;
+};
+
 &tlv320aic3x04 {
 	clock-names = "mclk";
 	clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
index e68a3fd73e17..1d23814e11cd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
@@ -52,6 +52,10 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&easrc {
+	status = "okay";
+};
+
 &flexspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexspi>;
@@ -63,6 +67,7 @@
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5_reg>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index b364307868f2..38ef9e4fdf07 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -300,7 +300,7 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 30c286b34aa5..5aa0e2cd155e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -248,6 +248,7 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
@@ -693,6 +694,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index a5f9cfb46e5d..b98b3d0ddf25 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -62,7 +62,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,7 +82,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -102,7 +100,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -121,7 +118,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -864,6 +860,8 @@
 					clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
 						 <&clk IMX8MN_CLK_UART2_ROOT>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aipstz.h b/arch/arm64/boot/dts/freescale/imx8mp-aipstz.h
new file mode 100644
index 000000000000..6481c484ca37
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aipstz.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright 2025 NXP
+ */
+
+#ifndef __IMX8MP_AIPSTZ_H
+#define __IMX8MP_AIPSTZ_H
+
+/* consumer type - master or peripheral */
+#define IMX8MP_AIPSTZ_MASTER		0x0
+#define IMX8MP_AIPSTZ_PERIPH		0x1
+
+/* master configuration options */
+#define IMX8MP_AIPSTZ_MPL		(1 << 0)
+#define IMX8MP_AIPSTZ_MTW		(1 << 1)
+#define IMX8MP_AIPSTZ_MTR		(1 << 2)
+#define IMX8MP_AIPSTZ_MBW		(1 << 3)
+
+/* peripheral configuration options */
+#define IMX8MP_AIPSTZ_TP		(1 << 0)
+#define IMX8MP_AIPSTZ_WP		(1 << 1)
+#define IMX8MP_AIPSTZ_SP		(1 << 2)
+#define IMX8MP_AIPSTZ_BW		(1 << 3)
+
+/* master ID definitions */
+#define IMX8MP_AIPSTZ_EDMA		0 /* AUDIOMIX EDMA */
+#define IMX8MP_AIPSTZ_CA53		1 /* Cortex-A53 cluster */
+#define IMX8MP_AIPSTZ_SDMA2		3 /* AUDIOMIX SDMA2 */
+#define IMX8MP_AIPSTZ_SDMA3		3 /* AUDIOMIX SDMA3 */
+#define IMX8MP_AIPSTZ_HIFI4		5 /* HIFI4 DSP */
+#define IMX8MP_AIPSTZ_CM7		6 /* Cortex-M7 */
+
+#endif /* __IMX8MP_AIPSTZ_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-adpismarc.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-adpismarc.dts
new file mode 100644
index 000000000000..6a688510dad9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-adpismarc.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mp-aristainetos3a-som-v1.dtsi"
+
+&{/} {
+	model = "Aristainetos3 ADLink PI SMARC carrier";
+	compatible = "abb,imx8mp-aristanetos3-adpismarc",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&i2c2 {
+	gpio8: pinctrl@3e {
+		compatible = "semtech,sx1509q";
+		reg = <0x3e>;
+
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		semtech,probe-reset;
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&gpio6>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios-lvds.dtso
new file mode 100644
index 000000000000..9d1f3b4ccc79
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios-lvds.dtso
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	model = "Aristainetos3 helios carrier with LVDS";
+	compatible = "abb,imx8mp-aristanetos3-helios",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+
+	panel_lvds: panel-lvds {
+		compatible = "lg,lb070wv8";
+		power-supply = <&reg_vcc_disp>;
+		backlight = <&lvds_backlight>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_vcc_disp: regulator-disp {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_vcc_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "disp_power_en_2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	lvdssel-hog {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "LVDSSEL";
+	};
+};
+
+&hdmi_blk_ctrl {
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "disabled";
+};
+
+&hdmi_tx {
+	status = "disabled";
+};
+
+&hdmi_tx_phy {
+	status = "disabled";
+};
+
+&irqsteer_hdmi {
+	status = "disabled";
+};
+
+&ldb_lvds_ch0 {
+	remote-endpoint = <&in_lvds0>;
+};
+
+&lcdif1 {
+	status = "disabled";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "disabled";
+};
+
+&lvds_backlight {
+	status = "okay";
+};
+
+&lvds_bridge {
+	/* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+	assigned-clock-rates = <232820000>;
+	status = "okay";
+};
+
+&media_blk_ctrl {
+	/*
+	 * currently it is not possible to let display clocks configure
+	 * automatically, so we need to set them manually
+	 */
+	assigned-clock-rates = <500000000>, <200000000>, <0>,
+		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
+		<33260000>, <0>,
+		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
+		<465640000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios.dts
new file mode 100644
index 000000000000..a4e649a8239b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-helios.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-aristainetos3a-som-v1.dtsi"
+
+&{/} {
+	model = "Aristainetos3 helios carrier";
+	compatible = "abb,imx8mp-aristanetos3-helios",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <20>;
+			gpios = <&pca6416 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&fec {
+	status = "disabled";
+};
+
+&i2c1 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&i2c3 {
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "DIN0_CON",
+			"DIN1_CON",
+			"DIN2_CON",
+			"DIN3_CON",
+			"DIN4_CON",
+			"DIN5_CON",
+			"DIN6_CON",
+			"DIN7_CON",
+			"PM102_RES",
+			"COMx_RES",
+			"BPL_RES",
+			"PC_RES",
+			"LED_RED",
+			"LED_YELLOW",
+			"LED_GREEN",
+			"LED_BLUE";
+	};
+
+	rtc@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
new file mode 100644
index 000000000000..58e36de7a2cd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mp-aristainetos3a-som-v1.dtsi"
+
+&{/} {
+	model = "Aristainetos3 proton2s carrier";
+	compatible = "abb,imx8mp-aristanetos3-proton2s",
+		     "abb,imx8mp-aristanetos3-som",
+		     "fsl,imx8mp";
+
+	watchdog {
+		/* MAX6371KA */
+		compatible = "linux,wdt-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_watchdog_gpio>;
+		always-running;
+		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		hw_algo = "level";
+		/* Reset triggers in 3..9 seconds */
+		hw_margin_ms = <1500>;
+	};
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&eqos {
+	max-speed = <100>;
+};
+
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+};
+
+&fec {
+	status = "disabled";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_proton2s>;
+
+	gpio-line-names =
+		"", "", "", "", "", "", "", "POWER",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"RELAY0", "RELAY1", "RELAY2", "HEATER",
+		"FAN", "SPARE",	"CLEAR", "FAULT",
+		"", "", "", "", "", "", "", "", "";
+};
+
+&i2c2 {
+	tlc59108@40 {
+		compatible = "ti,tlc59108";
+		reg = <0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0x0>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <20>;
+		};
+
+		led@1 {
+			reg = <0x1>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <20>;
+		};
+
+		led@2 {
+			reg = <0x2>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <21>;
+		};
+
+		led@3 {
+			reg = <0x3>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <21>;
+		};
+
+		led@4 {
+			reg = <0x4>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <21>;
+		};
+
+		led@5 {
+			reg = <0x5>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <22>;
+		};
+
+		led@6 {
+			reg = <0x6>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <22>;
+		};
+
+		led@7 {
+			reg = <0x7>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <22>;
+		};
+	};
+
+	rtc1: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+&uart4 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rts-delay = <0 0>;
+	rts-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usdhc1 {
+	status = "disabled";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
new file mode 100644
index 000000000000..f654d866e58c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
@@ -0,0 +1,1107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 Heiko Schocher <hs@denx.de>
+ */
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "ADLINK LEC-iMX8MP-Q-N-4G-32G";
+	compatible = "abb,imx8mp-aristanetos3-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		mmc0 = &usdhc3;	/* eMMC */
+		mmc1 = &usdhc2;	/* MicroSD */
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200";
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			function-enumerator = <0>;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	lvds_backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_bklt_en>;
+		pwms = <&pwm2 0 50000 0>;
+		enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <80>;
+		status = "disabled";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* Memory size 512 MiB..8 GiB will be filled by U-Boot */
+		reg = <0x0 0x40000000 0 0x08000000>;
+	};
+
+	pcie0_refclk: clock-pcie-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_reg>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can1-stby";
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can2-stby";
+	};
+
+	reg_dp83867_2v5: regulator-enet {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "enet_2v5";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		enable-active-high;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb1_host_vbus";
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		enable-active-high;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_SD";
+		off-on-delay-us = <12000>;
+		startup-delay-us = <100>;
+		vin-supply = <&buck4>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&clk {
+	clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+		 <&clk_ext3>, <&clk_ext4>;
+	clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+		      "clk_ext3", "clk_ext4";
+	assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+			  <&clk IMX8MP_CLK_A53_CORE>,
+			  <&clk IMX8MP_CLK_NOC>,
+			  <&clk IMX8MP_CLK_NOC_IO>,
+			  <&clk IMX8MP_CLK_GIC>,
+			  <&clk IMX8MP_CLK_AUDIO_AHB>,
+			  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
+			  <&clk IMX8MP_AUDIO_PLL1>,
+			  <&clk IMX8MP_AUDIO_PLL2>,
+			  <&clk IMX8MP_VIDEO_PLL1>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs2>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW &gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* eth0 */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: eqos-ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,dp83867-rxctrl-strap-quirk;
+			interrupt-parent = <&gpio4>;
+			interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+};
+
+/* eth1 */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpio = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,dp83867-rxctrl-strap-quirk;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "disabled";
+};
+
+&hdmi_blk_ctrl {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8CVNKZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-name = "buck1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-name = "buck2";
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4: BUCK4 {	/* VDD_3V3 */
+				regulator-name = "buck4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* VDD_1V8 */
+				regulator-name = "buck5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
+				regulator-name = "buck6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo2: LDO2 {	/* VDDA_1V8 */
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1V8 */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* PMIC_LDO4 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	status = "okay";
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	/* TPM - ST33TPHF2XI2C U2301 */
+	tpm: tpm@2e {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+
+		label = "tpm";
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	/* SX1509(0) U2605 */
+	gpio6: pinctrl@3f {
+		compatible = "semtech,sx1509q";
+		reg = <0x3f>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		semtech,probe-reset;
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	/* RTC U2607 */
+	rtc0: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+
+	/* SX1509(1) U2606 */
+	gpio7: pinctrl@70 {
+		compatible = "semtech,sx1509q";
+		reg = <0x70>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		semtech,probe-reset;
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+
+		gpio6-cfg {
+			pins = "gpio6";
+			output-high;
+		};
+
+		gpio7-cfg {
+			pins = "gpio7";
+			output-high;
+		};
+	};
+};
+
+&irqsteer_hdmi {
+	status = "okay";
+};
+
+&lcdif1 {
+	status = "disabled";
+};
+
+&lcdif2 {
+	status = "disabled";
+};
+
+/* HDMI */
+&lcdif3 {
+	status = "okay";
+
+};
+
+&lvds_bridge {
+	status = "disabled";
+};
+
+&mipi_dsi {
+	status = "disabled";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	fsl,tx-deemph-gen1 = <0x1f>;
+	fsl,max-link-speed = <3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+/* SD slot */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: aristainetos3-ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40000
+		>;
+	};
+
+	pinctrl_ecspi1_cs2: aristainetos3-ecspi1-cs2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40000
+		>;
+	};
+
+	pinctrl_ecspi2: aristainetos3-ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40000
+		>;
+	};
+
+	pinctrl_eqos_rgmii: aristainetos3-eqos-rgmii-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22				0x19
+		>;
+	};
+
+	pinctrl_fec_rgmii: aristainetos3-fec-rgmii-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x19
+		>;
+	};
+
+	pinctrl_flexcan1: aristainetos3-flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_flexcan1_reg: aristainetos3-flexcan1-reg-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05  0x154
+		>;
+	};
+
+	pinctrl_flexcan2: aristainetos3-flexcan2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX         0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX         0x154
+		>;
+	};
+
+	pinctrl_flexcan2_reg: aristainetos3-flexcan2-reg-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x154
+		>;
+	};
+
+	pinctrl_gpio3_hog: aristainetos3-gpio3-hog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23	0xd6
+		>;
+	};
+
+	pinctrl_gpio_led: aristainetos3-gpio-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_gpio_proton2s: aristainetos3-gpio-proton2s-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x19
+		>;
+	};
+
+	pinctrl_hdmi: aristainetos3-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000019
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000019
+		>;
+	};
+
+	pinctrl_i2c1: aristainetos3-i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: aristainetos3-i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1c3
+		>;
+	};
+
+	pinctrl_i2c2: aristainetos3-i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: aristainetos3-i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1c3
+		>;
+	};
+
+	pinctrl_i2c3: aristainetos3-i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: aristainetos3-i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1c3
+		>;
+	};
+
+	pinctrl_i2c5: aristainetos3-i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL	0x400001c3
+			MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6: aristainetos3-i2c6-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL	0x400001c3
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6_gpio: aristainetos3-i2c6-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x1c3
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x1c3
+		>;
+	};
+
+	pinctrl_lcd0_vcc_en: aristainetos3-lcd0-vcc-en-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0xd6
+		>;
+	};
+
+	pinctrl_lvds_bklt_en: aristainetos3-lvds-bklt-en-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0xd6
+		>;
+	};
+
+	pinctrl_pcie: aristainetos3-pcie-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x61
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x41
+		>;
+	};
+
+	pinctrl_pmic: aristainetos3-pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x41
+		>;
+	};
+
+	pinctrl_pwm1: aristainetos3-pwm1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: aristainetos3-pwm2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_tpm_irq: aristainetos3-tpm-irq-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0xd6
+		>;
+	};
+
+	pinctrl_uart1: aristainetos3-uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart2: aristainetos3-uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x140
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS	0x140
+		>;
+	};
+
+	pinctrl_uart3: aristainetos3-uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: aristainetos3-uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX    0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX    0x140
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x140
+			MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS 0x140
+		>;
+	};
+
+	pinctrl_usb1_vbus: aristainetos3-usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x19
+		>;
+	};
+
+	pinctrl_usdhc1: aristainetos3-usdhc1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: aristainetos3-usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: aristainetos3-usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: aristainetos3-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: aristainetos3-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: aristainetos3-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: aristainetos3-usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x40000080
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: aristainetos3-usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc3: aristainetos3-usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: aristainetos3-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: aristainetos3-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_watchdog_gpio: aristainetos3-wdog-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06	0x19
+		>;
+	};
+
+	pinctrl_wdog: aristainetos3-wdog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
index 15f7ab58db36..6a62cb32e22e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
@@ -257,6 +257,12 @@
 	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		quartz-load-femtofarads = <12500>;
+		wakeup-source;
 	};
 };
 
@@ -381,6 +387,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x1d0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
new file mode 100644
index 000000000000..8290f187b79f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx8mp-sr-som.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP CuBox-M";
+	compatible = "solidrun,imx8mp-cubox-m",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_pins>;
+		linux,autosuspend-period = <125>;
+		wakeup-source;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status {
+			label = "status";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+
+	vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc_pins>;
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <250>;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c3 {
+	carrier_rtc: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	hdmi_pins: pinctrl-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	ir_pins: pinctrl-ir-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x4f
+		>;
+	};
+
+	led_pins: pinctrl-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x0
+		>;
+	};
+
+	usdhc2_pins: pinctrl-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	vbus_pins: pinctrl-vbus-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x100
+		>;
+	};
+
+	vmmc_pins: pinctrl-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x0
+		>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc2_pins>;
+	pinctrl-1 = <&usdhc2_100mhz_pins>;
+	pinctrl-2 = <&usdhc2_200mhz_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index d0fc5977258f..16078ff60ef0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -555,6 +555,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index af02af9e5334..9422beee30b2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -96,9 +96,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy0: ethernet-phy@0 { /* RTL8211E */
+		ethphy0: ethernet-phy@1 { /* RTL8211E */
 			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
+			reg = <1>;
 			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <20>;
 			reset-deassert-us = <200000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
index d241db3743a9..04619a722906 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
@@ -22,6 +22,18 @@
 		stdout-path = &uart2;
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	reg_baseboard_vdd3v3: regulator-baseboard-vdd3v3 {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
@@ -222,6 +234,28 @@
 	};
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c4 {
 	expander0: gpio@20 {
 		compatible = "nxp,pca9535";
@@ -276,6 +310,10 @@
 	};
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -430,6 +468,15 @@
 		>;
 	};
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x19
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x19
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index ebdf13e97b4e..3d18c964a22c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -88,6 +88,7 @@
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */
 			pinctrl-0 = <&pinctrl_dhcom_e>;
 			pinctrl-names = "default";
@@ -97,6 +98,7 @@
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
 			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
 			pinctrl-0 = <&pinctrl_dhcom_f>;
 			pinctrl-names = "default";
@@ -106,6 +108,7 @@
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */
 			pinctrl-0 = <&pinctrl_dhcom_h>;
 			pinctrl-names = "default";
@@ -115,6 +118,7 @@
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "off";
 			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
 			pinctrl-0 = <&pinctrl_dhcom_i>;
 			pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index a90e28c07e3f..68c2e0156a5c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -590,7 +590,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {	/* muRata 2AE */
+	brcmf: wifi@1 {	/* muRata 2AE */
 		reg = <1>;
 		compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
 		/*
@@ -609,6 +609,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts b/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts
new file mode 100644
index 000000000000..138f21e257aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 TechNexion Ltd.
+ *
+ * Author: Ray Chang <ray.chang@technexion.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-edm-g.dtsi"
+
+/ {
+	compatible = "technexion,edm-g-imx8mp-wb", "technexion,edm-g-imx8mp", "fsl,imx8mp";
+	model = "TechNexion EDM-G-IMX8MP SOM on WB-EDM-G";
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "dual";
+		label = "USB-C";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			default-state = "on";
+			gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+			label = "gpio-led";
+		};
+	};
+
+	pcie0_refclk: clock-pcie-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_pwr_3v3: regulator-pwr-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "pwr-3v3";
+	};
+
+	reg_pwr_5v: regulator-pwr-5v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "pwr-5v";
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+		model = "audio-hdmi";
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		audio-asrc = <&easrc>;
+		audio-codec = <&wm8960>;
+		audio-cpu = <&sai3>;
+		audio-routing = "Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT1", "Mic Jack",
+			"Mic Jack", "MICB";
+		model = "wm8960-audio";
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&easrc {
+	fsl,asrc-rate  = <48000>;
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "DSI_RST", "",
+		"", "", "", "", "", "PCIE_CLKREQ_N", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+	pinctrl-0 = <&pinctrl_gpio1>;
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "GPIO_P249", "GPIO_P251",
+		"", "GPIO_P255", "", "", "", "", "", "",
+		"DSI_BL_EN", "DSI_VDDEN", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+	pinctrl-0 = <&pinctrl_gpio4>;
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&pinctrl_hdmi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8960: audio-codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_pwr_3v3>;
+		DBVDD-supply = <&reg_pwr_3v3>;
+		DCVDD-supply = <&reg_pwr_3v3>;
+		SPKVDD1-supply = <&reg_pwr_5v>;
+		SPKVDD2-supply = <&reg_pwr_5v>;
+		wlf,gpio-cfg = <1 2>;
+		wlf,hp-cfg = <2 2 3>;
+		wlf,shared-lrclk;
+	};
+
+	expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "EXPOSURE_TRIG_IN1", "FLASH_OUT1",
+				  "INFO_TRIG_IN1", "CAM_SHUTTER1", "XVS1",
+				  "PWR1_TIME0", "PWR1_TIME1", "PWR1_TIME2",
+				  "EXPOSURE_TRIG_IN2", "FLASH_OUT2",
+				  "INFO_TRIG_IN2", "CAM_SHUTTER2", "XVS2",
+				  "PWR2_TIME0", "PWR2_TIME1", "PWR2_TIME2";
+	};
+
+	expander2: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio4>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "M2_DISABLE_N", "LED_EN", "", "",
+				  "", "", "", "USB_OTG_OC",
+				  "EXT_GPIO8", "EXT_GPIO9", "", "",
+				  "", "CSI1_PDB", "CSI2_PDB", "PD_FAULT";
+		pinctrl-0 = <&pinctrl_expander2_irq>;
+		pinctrl-names = "default";
+	};
+
+	usb_typec: usb-typec@67 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x67>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_hd3ss3220_irq>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_0 {
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+&iomuxc {
+	pinctrl_expander2_irq: expander2-irqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11		0x140 /* GPIO_P247 */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x16 /* DSI_RST */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06		0x16 /* GPIO_P249 */
+			MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07		0x16 /* GPIO_P251 */
+			MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09		0x16 /* GPIO_P255 */
+			MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16		0x16 /* DSI_BL_EN */
+			MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17		0x16 /* DSI_VDDEN */
+		>;
+	};
+
+	pinctrl_hd3ss3220_irq: hd3ss3220-irqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08		0x41 /* GPIO_P253 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi
new file mode 100644
index 000000000000..3f1e0837f349
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi
@@ -0,0 +1,786 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 TechNexion Ltd.
+ *
+ * Author: Ray Chang <ray.chang@technexion.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	i2c_0: i2c {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		pinctrl-0 = <&pinctrl_i2c_brd_conf>;
+		pinctrl-names = "default";
+		scl-gpios = <&gpio4 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio4 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		eeprom: eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+
+	memory@40000000 {
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+		device_type = "memory";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+		startup-delay-us = <100>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		name = "rfkill";
+		pinctrl-0 = <&pinctrl_bt_ctrl>;
+		pinctrl-names = "default";
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	wl_reg_on: regulator-wl-reg-on {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <20000>;
+		pinctrl-0 = <&pinctrl_wifi_ctrl>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "WL_REG_ON";
+		startup-delay-us = <100>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	num-cs = <1>;
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	pinctrl-names = "default";
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-assert-us = <35000>;
+			reset-deassert-us = <75000>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			realtek,clkout-disable;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0>;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <1>;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <2>;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <3>;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <4>;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1025000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3600000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-name = "BUCK4";
+			};
+
+			reg_buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "BUCK5";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "BUCK6";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "LDO1";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1890000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "LDO3";
+			};
+
+			LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* I2C_B on EDMG */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-names = "default";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-names = "default";
+};
+
+&i2c4 {
+	/* I2C_A on EDMG */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-names = "default";
+};
+
+&i2c5 {
+	/* I2C_C on EDMG */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-0 = <&pinctrl_pwm2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-0 = <&pinctrl_pwm3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sai2 {
+	/* AUD_B on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-rates = <12288000>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	/* AUD_A on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-rates = <12288000>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	/* BT */
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	/* UART_A on EDMG, console */
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart3 {
+	/* UART_C on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart3>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	/* UART_B on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc1 {
+	/* WIFI SDIO */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC1>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&wl_reg_on>;
+	status = "okay";
+};
+
+&usdhc2 {
+	/* SD card on baseboard */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC on SOM */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+	pinctrl-names = "default";
+
+	pinctrl_bt_ctrl: bt-ctrlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x41 /* BT_REG_ON */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x41 /* BT_WAKE_HOST */
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x40000
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x23
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09			0x19
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12			0x19
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000019
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001a3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001a3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001a3
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c_brd_conf: i2cbrdconfgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x1c3 /* BRD_CONF_SCL, bitbang */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x1c3 /* BRD_CONF_SDA, bitbang */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x41 /* PCIE CLKREQ */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x41 /* PCIE WAKE */
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x41 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT		0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT	0x116
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+			MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS	0x140
+			MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+
+	pinctrl_wifi_ctrl: wifi-ctrlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00	0x41 /* WL_REG_ON */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x41 /* WL_WAKE_HOST */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-imx-lvds-hdmi-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-evk-imx-lvds-hdmi-common.dtsi
new file mode 100644
index 000000000000..44b30e9b3fde
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-imx-lvds-hdmi-common.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	lvds-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J2";
+		type = "a";
+
+		port {
+			lvds2hdmi_connector_in: endpoint {
+				remote-endpoint = <&it6263_out>;
+			};
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso
new file mode 100644
index 000000000000..4008d2fd36d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+			dual-lvds-odd-pixels;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-even-pixels;
+
+			it6263_lvds_link2: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&it6263_lvds_link2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi
new file mode 100644
index 000000000000..6eae7477abf8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-evk-imx-lvds-hdmi-common.dtsi"
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it6263: hdmi@4c {
+		compatible = "ite,it6263";
+		reg = <0x4c>;
+		data-mapping = "jeida-24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_en>;
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		ivdd-supply = <&reg_buck5>;
+		ovdd-supply = <&reg_vext_3v3>;
+		txavcc18-supply = <&reg_buck5>;
+		txavcc33-supply = <&reg_vext_3v3>;
+		pvcc1-supply = <&reg_buck5>;
+		pvcc2-supply = <&reg_buck5>;
+		avcc-supply = <&reg_vext_3v3>;
+		anvdd-supply = <&reg_buck5>;
+		apvdd-supply = <&reg_buck5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@2 {
+				reg = <2>;
+
+				it6263_out: endpoint {
+					remote-endpoint = <&lvds2hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi.dtso
new file mode 100644
index 000000000000..9e11f261ad13
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds0-imx-lvds-hdmi.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds0-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtso
new file mode 100644
index 000000000000..af2e73e36a1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+			dual-lvds-even-pixels;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-odd-pixels;
+
+			it6263_lvds_link2: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&it6263_lvds_link2>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi
new file mode 100644
index 000000000000..8cc9d361c2a4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-evk-imx-lvds-hdmi-common.dtsi"
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it6263: hdmi@4c {
+		compatible = "ite,it6263";
+		reg = <0x4c>;
+		data-mapping = "jeida-24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_en>;
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		ivdd-supply = <&reg_buck5>;
+		ovdd-supply = <&reg_vext_3v3>;
+		txavcc18-supply = <&reg_buck5>;
+		txavcc33-supply = <&reg_vext_3v3>;
+		pvcc1-supply = <&reg_buck5>;
+		pvcc2-supply = <&reg_buck5>;
+		avcc-supply = <&reg_vext_3v3>;
+		anvdd-supply = <&reg_buck5>;
+		apvdd-supply = <&reg_buck5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@2 {
+				reg = <2>;
+
+				it6263_out: endpoint {
+					remote-endpoint = <&lvds2hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi.dtso
new file mode 100644
index 000000000000..527a893a71b2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk-lvds1-imx-lvds-hdmi.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx8mp-evk-lvds1-imx-lvds-hdmi-common.dtsi"
+
+&it6263 {
+	ports {
+		port@0 {
+			reg = <0>;
+
+			it6263_lvds_link1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&it6263_lvds_link1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index d26930f1a9e9..c6facb2ad9aa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -74,6 +74,24 @@
 		clock-frequency = <100000000>;
 	};
 
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	reg_audio_pwr: regulator-audio-pwr {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -150,37 +168,6 @@
 		#sound-dai-cells = <1>;
 	};
 
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "wm8960-audio";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,frame-master = <&cpudai>;
-		simple-audio-card,bitclock-master = <&cpudai>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker",
-			"Microphone", "Mic Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HP_L",
-			"Headphone Jack", "HP_R",
-			"External Speaker", "SPK_LP",
-			"External Speaker", "SPK_LN",
-			"External Speaker", "SPK_RP",
-			"External Speaker", "SPK_RN",
-			"LINPUT1", "Mic Jack",
-			"LINPUT3", "Mic Jack",
-			"Mic Jack", "MICB";
-
-		cpudai: simple-audio-card,cpu {
-			sound-dai = <&sai3>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&wm8960>;
-		};
-
-	};
-
 	sound-bt-sco {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "bt-sco-audio";
@@ -221,6 +208,26 @@
 		};
 	};
 
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		audio-asrc = <&easrc>;
+		audio-codec = <&wm8960>;
+		audio-cpu = <&sai3>;
+		audio-routing = "Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"Mic Jack", "MICB";
+		hp-det-gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		model = "wm8960-audio";
+		pinctrl-0 = <&pinctrl_hpdet>;
+		pinctrl-names = "default";
+	};
+
 	sound-xcvr {
 		compatible = "fsl,imx-audio-card";
 		model = "imx-audio-xcvr";
@@ -291,6 +298,21 @@
 	status = "okay";
 };
 
+&dsp_reserved {
+	status = "okay";
+};
+
+&dsp {
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
+	status = "okay";
+};
+
+&easrc {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -420,6 +442,10 @@
 	status = "disabled";/* can2 pin conflict with pdm */
 };
 
+&hdmi_pai {
+	status = "okay";
+};
+
 &hdmi_pvi {
 	status = "okay";
 };
@@ -586,7 +612,11 @@
 		wlf,shared-lrclk;
 		wlf,hp-cfg = <3 2 3>;
 		wlf,gpio-cfg = <1 3>;
+		AVDD-supply = <&reg_audio_3v3>;
+		DBVDD-supply = <&reg_audio_1v8>;
+		DCVDD-supply = <&reg_audio_1v8>;
 		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
 	};
 
 	pca6416: gpio@20 {
@@ -668,6 +698,10 @@
 	};
 };
 
+&mu2 {
+	status = "okay";
+};
+
 &pcie_phy {
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 	clocks = <&pcie0_refclk>;
@@ -675,14 +709,22 @@
 	status = "okay";
 };
 
-&pcie {
+&pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcie0>;
+	vpcie3v3aux-supply = <&reg_pcie0>;
+	supports-clkreq;
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
@@ -910,6 +952,12 @@
 		>;
 	};
 
+	pinctrl_hpdet: hpdetgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0xd6
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
@@ -938,6 +986,12 @@
 		>;
 	};
 
+	pinctrl_lvds_en: lvdsengrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x1c0
+		>;
+	};
+
 	pinctrl_pcie0: pcie0grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x60 /* open drain, pull up */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
new file mode 100644
index 000000000000..00614f5d58ea
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Mate";
+	compatible = "solidrun,imx8mp-hummingboard-mate",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
new file mode 100644
index 000000000000..36cd452f1583
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Pro";
+	compatible = "solidrun,imx8mp-hummingboard-pro",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+		    <&m2_wwan_wake_pins>;
+};
+
+&pcie {
+	pinctrl-0 = <&m2_reset_pins>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&phy0 {
+	leds {
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/delete-node/ led@1;
+	};
+};
+
+&phy1 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
new file mode 100644
index 000000000000..77402a3db9ef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	sound-wm8904 {
+		compatible = "fsl,imx-audio-wm8904";
+		model = "audio-wm8904";
+		audio-cpu = <&sai3>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"AMIC", "MICBIAS",
+			"IN2R", "AMIC";
+	};
+};
+
+&i2c2 {
+	codec: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&v_1_8>;
+		CPVDD-supply = <&v_1_8>;
+		DBVDD-supply = <&v_3_3>;
+		DCVDD-supply = <&v_1_8>;
+		MICVDD-supply = <&v_3_3>;
+	};
+};
+
+&iomuxc {
+	sai3_pins: pinctrl-sai3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+		>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sai3_pins>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, <&clk IMX8MP_CLK_DUMMY>,
+		 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, <&clk IMX8MP_CLK_DUMMY>,
+		 <&clk IMX8MP_CLK_DUMMY>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
new file mode 100644
index 000000000000..825ad6a2ba14
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			label = "D30";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "D31";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label = "D32";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-3 {
+			label = "D33";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-4 {
+			label = "D34";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	rfkill-mpcie-wifi {
+		/*
+		 * The mpcie connector only has USB,
+		 * therefore this rfkill is for cellular radios only.
+		 */
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpcie_rfkill_pins>;
+		label = "mpcie radio";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc_pins>;
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <250>;
+	};
+
+	vbus1: regulator-vbus-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus1";
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus1_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vbus2: regulator-vbus-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus2";
+		gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus2_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	v_1_2: regulator-1-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	vmpcie {
+		/* supplies mpcie and m2 connectors */
+		compatible = "regulator-fixed";
+		regulator-name = "vmpcie";
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmpcie_pins>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+/* mikrobus spi */
+&ecspi2 {
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_spi_pins>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&mpcie_reset_pins>;
+	pinctrl-names = "default";
+
+	mpcie-reset-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "mpcie-reset";
+	};
+};
+
+&i2c3 {
+	carrier_eeprom: eeprom@57{
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+
+	carrier_rtc: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+		abracon,tc-diode = "schottky";
+		abracon,tc-resistor = <3>;
+	};
+};
+
+&iomuxc {
+	csi_pins: pinctrl-csi-grp {
+		fsl,pins = <
+			/* Pin 24: STROBE */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x0
+		>;
+	};
+
+	led_pins: pinctrl-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x0
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x0
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23		0x0
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x0
+			MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28		0x0
+		>;
+	};
+
+	mikro_int_pins: pinctrl-mikro-int-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x0
+		>;
+	};
+
+	mikro_pwm_pins: pinctrl-mikro-pwm-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08		0x0
+		>;
+	};
+
+	mikro_rst_pins: pinctrl-mikro-rst-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30		0x0
+		>;
+	};
+
+	mikro_spi_pins: pinctrl-mikro-spi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0		0x40000
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+		>;
+	};
+
+	mikro_uart_pins: pinctrl-mikro-uart-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+		>;
+	};
+
+	mpcie_reset_pins: pinctrl-mpcie-reset-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x0
+		>;
+	};
+
+	mpcie_rfkill_pins: pinctrl-pcie-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x20
+		>;
+	};
+
+	usb_hub_pins: pinctrl-usb-hub-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x0
+		>;
+	};
+
+	usdhc2_pins: pinctrl-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	vbus1_pins: pinctrl-vbus-1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x20
+		>;
+	};
+
+	vbus2_pins: pinctrl-vbus-2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x20
+		>;
+	};
+
+	vmmc_pins: pinctrl-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41
+		>;
+	};
+
+	vmpcie_pins: pinctrl-vmpcie-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x0
+		>;
+	};
+};
+
+&phy0 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/* ADIN1300 LINK_ST pin */
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* mikrobus uart */
+&uart3 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus2>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&vbus1>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_hub_pins>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb4b4,6502", "usb4b4,6506";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&v_1_2>;
+		vdd2-supply = <&v_3_3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb4b4,6500", "usb4b4,6504";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&v_1_2>;
+		vdd2-supply = <&v_3_3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc2_pins>;
+	pinctrl-1 = <&usdhc2_100mhz_pins>;
+	pinctrl-2 = <&usdhc2_200mhz_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
new file mode 100644
index 000000000000..d7a999c0d7e0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&iomuxc {
+	hdmi_pins: pinctrl-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
new file mode 100644
index 000000000000..8d8d8d2e3da8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	rfkill-m2-gnss {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_gnss_rfkill_pins>;
+		label = "m.2 GNSS";
+		radio-type = "gps";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* M.2 is B-keyed, so w-disable is for WWAN */
+	rfkill-m2-wwan {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_wwan_rfkill_pins>;
+		label = "m.2 WWAN";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&iomuxc {
+	m2_gnss_rfkill_pins: pinctrl-m2-gnss-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x20
+		>;
+	};
+
+	m2_reset_pins: pinctrl-m2-reset-grp {
+		fsl,pins = <
+			/*
+			 * 3.3V domain on SoC, set open-drain to ensure
+			 * 1.8V logic on connector
+			 */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x20
+		>;
+	};
+
+	m2_wwan_rfkill_pins: pinctrl-m2-wwan-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x20
+		>;
+	};
+
+	m2_wwan_wake_pins: pinctrl-m2-wwan-wake-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x20
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
new file mode 100644
index 000000000000..46916ddc0533
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3f>, <0x3c>, <0x38>;
+		reg-names = "main", "edid", "cec", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&v_1_8>;
+		dvdd-supply = <&v_1_8>;
+		pvdd-supply = <&v_1_8>;
+		a2vdd-supply = <&v_1_8>;
+		v3p3-supply = <&v_3_3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mini_hdmi_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_from_dsim: endpoint {
+					remote-endpoint = <&dsim_to_adv7535>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&iomuxc {
+	mini_hdmi_pins: pinctrl-mini-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x0
+		>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	port@1 {
+		dsim_to_adv7535: endpoint {
+			remote-endpoint = <&adv7535_from_dsim>;
+			attach-bridge;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
new file mode 100644
index 000000000000..d32844c3af05
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Pulse";
+	compatible = "solidrun,imx8mp-hummingboard-pulse",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &pcie_eth;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&gpio1 {
+	pinctrl-0 = <&mpcie_reset_pins>, <&m2_reset_pins>;
+	pinctrl-names = "default";
+
+	m2-reset-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-reset";
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+		    <&m2_wwan_wake_pins>;
+
+	pcie_eth_pins: pinctrl-pcie-eth-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x0
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-0 = <&pcie_eth_pins>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	root@0,0 {
+		compatible = "pci16c3,abcd";
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* Intel i210 */
+		pcie_eth: ethernet@1,0 {
+			compatible = "pci8086,157b";
+			reg = <0x00010000 0 0 0 0>;
+		};
+	};
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
new file mode 100644
index 000000000000..4ce5b799b6ab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Ripple";
+	compatible = "solidrun,imx8mp-hummingboard-ripple",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
index 0eb9e726a9b8..0924ac50fd2d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
@@ -16,11 +16,20 @@
 		ethernet1 = &eqos;
 	};
 
-	extcon_usbc: usbc {
-		compatible = "linux,extcon-usb-gpio";
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb1_id>;
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
 	};
 
 	leds {
@@ -123,40 +132,54 @@
 
 /*
  * Rename SoM signals according to board usage:
- *   SPI_A_WP      -> CAN_ADDR0
- *   SPI_A_HOLD    -> CAN_ADDR1
- *   GPIO_B_0      -> DIO1_OUT
- *   GPIO_B_1      -> DIO2_OUT
+ *   GPIO_B_0      -> IO_EXP_INT
+ *   GPIO_B_1      -> IO_EXP_RST
  */
 &gpio3 {
 	gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
-			  "SDIO_B_D6", "SDIO_B_D7", "CAN_ADDR0", "CAN_ADDR1",
+			  "SDIO_B_D6", "SDIO_B_D7", "SPI_A_WP", "SPI_A_HOLD",
 			  "UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
 			  "SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
-			  "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "DIO1_OUT",
-			  "DIO2_OUT", "", "BOOT_SEL0", "BOOT_SEL1",
+			  "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "IO_EXP_INT",
+			  "IO_EXP_RST", "", "BOOT_SEL0", "BOOT_SEL1",
 			  "", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
 			  "HDMI_CEC", "HDMI_HPD";
 };
 
 /*
- * Rename SoM signals according to board usage:
- *   GPIO_B_5      -> DIO2_IN
- *   GPIO_B_6      -> DIO3_IN
- *   GPIO_B_7      -> DIO4_IN
- *   GPIO_B_3      -> DIO4_OUT
- *   GPIO_B_4      -> DIO1_IN
- *   GPIO_B_2      -> DIO3_OUT
+ * Rename SoM signals according to board usage and remove labels for unsed pins:
+ *   GPIO_A_6      -> TFT_RESET
+ *   GPIO_A_7      -> TFT_STBY
+ *   GPIO_B_3      -> CSI_ENABLE
+ *   GPIO_B_2      -> USB_HUB_RST
  */
 &gpio4 {
-	gpio-line-names = "DIO2_IN", "DIO3_IN", "DIO4_IN", "GPIO_C_0",
+	gpio-line-names = "", "", "", "",
 			  "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
 			  "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
 			  "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
-			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "DIO4_OUT", "DIO1_IN",
-			  "DIO3_OUT", "GPIO_A_6", "CAN_A_TX", "UART_A_CTS",
+			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "CSI_ENABLE", "",
+			  "USB_HUB_RST", "TFT_RESET", "CAN_A_TX", "UART_A_CTS",
 			  "UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
-			  "GPIO_A_7", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+			  "TFT_STBY", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   SPI_A_SDI	-> CAN_ADDR0
+ *   SPI_A_SDO	-> CAN_ADDR1
+ */
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "PWM_2",
+			  "PWM_1", "PWM_0", "SPI_A_SCK", "CAN_ADDR1",
+			  "CAN_ADDR0", "SPI_A_CS0", "SPI_B_SCK", "SPI_B_SDO",
+			  "SPI_B_SDI", "SPI_B_CS0", "I2C_A_SCL", "I2C_A_SDA",
+			  "I2C_B_SCL", "I2C_B_SDA", "PCIE_SMCLK", "PCIE_SMDAT",
+			  "I2C_CAM_SCL", "I2C_CAM_SDA", "UART_A_RX", "UART_A_TX",
+			  "UART_C_RX", "UART_C_TX", "UART_CON_RX", "UART_CON_TX",
+			  "UART_B_RX", "UART_B_TX";
 };
 
 &hdmi_pvi {
@@ -230,14 +253,18 @@
 	hnp-disable;
 	srp-disable;
 	dr_mode = "otg";
-	extcon = <&extcon_usbc>;
 	usb-role-switch;
+	role-switch-default-mode = "peripheral";
 	status = "okay";
+
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 &usb_dwc3_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_hub>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	dr_mode = "host";
@@ -246,7 +273,7 @@
 	usb-hub@1 {
 		compatible = "usb424,2514";
 		reg = <1>;
-		reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -261,7 +288,6 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
@@ -297,9 +323,10 @@
 		>;
 	};
 
-	pinctrl_usb_hub: usbhubgrp {
+	pinctrl_gpio5: gpio5grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x46
+			MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07		0x46 /* CAN_ADR0 */
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08		0x46 /* CAN_ADR1 */
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
index e0e9f6f7616d..b97bfeb1c30f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
@@ -311,6 +311,7 @@
 				regulator-name = "NVCC_SD (LDO5)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
+				sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			};
 		};
 	};
@@ -808,7 +809,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0 /* SDIO_A_D1 */
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
 		>;
 	};
 
@@ -820,7 +821,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4 /* SDIO_A_D1 */
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
 		>;
 	};
 
@@ -832,7 +833,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6 /* SDIO_A_D1 */
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
-			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x400001d0
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso
new file mode 100644
index 000000000000..1dcf249ca90d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc-lvds-etml1010g3dra.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_lvds0 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm1 0 66667 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <0>, <506800000>;
+	status = "okay";
+};
+
+&panel0_lvds {
+	compatible = "edt,etml1010g3dra";
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts
new file mode 100644
index 000000000000..6f3a7b863dca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-libra-rdk-fpsc.dts
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-phycore-fpsc.dtsi"
+
+/ {
+	compatible = "phytec,imx8mp-libra-rdk-fpsc",
+		     "phytec,imx8mp-phycore-fpsc", "fsl,imx8mp";
+	model = "PHYTEC i.MX8MP Libra RDK FPSC";
+
+	backlight_lvds0: backlight0 {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		pinctrl-names = "default";
+		power-supply = <&reg_vdd_12v0>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	panel0_lvds: panel-lvds {
+		/* compatible panel in overlay */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_vdd_3v3>;
+		status = "disabled";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "can1-stby";
+		gpio = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "can2-stby";
+		gpio = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vdd_12v0: regulator-vdd-12v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VDD_12V0";
+	};
+
+	reg_vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3";
+	};
+
+	reg_vdd_5v0: regulator-vdd-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VDD_5V0";
+	};
+};
+
+&eqos {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		};
+	};
+};
+
+/* CAN FD */
+&flexcan1 {
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&flexspi {
+	status = "okay";
+
+	spi_nor: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "I2C5_SDA",
+			  "GPIO1", "", "", "", "SPI1_CS",
+			  "", "", "", "SPI2_CS", "I2C1_SCL",
+			  "I2C1_SDA", "I2C2_SCL", "I2C2_SDA", "I2C3_SCL", "I2C3_SDA",
+			  "", "GPIO2", "", "LVDS1_BL_EN", "SPI3_CS",
+			  "", "GPIO3";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3",
+				  "CSI1_CTRL4", "CSI2_CTRL1", "CSI2_CTRL2",
+				  "CSI2_CTRL3", "CSI2_CTRL4", "CLK_EN_AV",
+				  "nCAN2_EN", "nCAN1_EN", "PCIE1_nWAKE",
+				  "PCIE2_nWAKE", "PCIE2_nALERT_3V3",
+				  "UART1_BT_RS_SEL", "UART1_RS232_485_SEL";
+		vcc-supply = <&reg_vdd_1v8>;
+
+		uart1_bt_rs_sel: bt-rs-hog {
+			gpios = <14 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_BT_RS_SEL";
+			output-low;	/* default RS232/RS485 */
+		};
+
+		uart1_rs232_485_sel: rs232-485-hog {
+			gpios = <15 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_RS232_485_SEL";
+			output-high;	/* default RS232 */
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_lvds0: lvds0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23	0x12
+		>;
+	};
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25	0x1C0
+		>;
+	};
+};
+
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel0_in>;
+			};
+		};
+	};
+};
+
+/* Mini PCIe */
+&pcie {
+	reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&reg_vdd_io {
+	regulator-max-microvolt = <1800000>;
+	regulator-min-microvolt = <1800000>;
+};
+
+&rv3028 {
+	interrupt-parent = <&gpio5>;
+	interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	aux-voltage-chargeable = <1>;
+	pinctrl-0 = <&pinctrl_rtc>;
+	pinctrl-names = "default";
+	trickle-resistor-ohms = <3000>;
+	wakeup-source;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* debug console */
+&uart4 {
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts
new file mode 100644
index 000000000000..1df9488aaeb2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-enc-carrier-board.dts
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Boundary Devices
+ * Copyright 2025 Collabora Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8mp-nitrogen-som.dtsi"
+
+/ {
+	model = "Boundary Devices Nitrogen8M Plus ENC Carrier Board";
+	compatible = "boundary,imx8mp-nitrogen-enc-carrier-board",
+			"boundary,imx8mp-nitrogen-som", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "dual";
+		label = "USB-C";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_usb_vbus: regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_vbus>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	usb-hub-reset-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		line-name = "usb-hub-reset";
+		output-low;
+	};
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&pinctrl_hdmi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c2 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pinctrl_i2c2_pca9546>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+
+			rtc@52 {
+				compatible = "microcrystal,rv3028";
+				reg = <0x52>;
+				interrupts-extended = <&gpio1 4 IRQ_TYPE_LEVEL_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_rv3028>;
+				wakeup-source;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	usb-mux@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupts-extended = <&gpio1 8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_hd3ss3220>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&isp_0 {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb3_0>;
+	usb-role-switch;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x143
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000019
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000019
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x100
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x119
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x16
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x1c4
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x41
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x41
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x41
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x41
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x41
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x41
+			MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03		0x41
+		>;
+	};
+
+	pinctrl_i2c2_pca9546: i2c2-pca9546grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x100
+		>;
+	};
+
+	pinctrl_i2c4_hd3ss3220: i2c4-hd3ss3220grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x16
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x03
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT		0x100
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT		0xd6
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0xd6
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+		MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT			0x116
+		>;
+	};
+
+	pinctrl_reg_usb_vbus: reg-usb-vbusgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x100
+		>;
+	};
+
+	pinctrl_rv3028: rv3028grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04		0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usb3_0: usb3-0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT		0x116
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi
new file mode 100644
index 000000000000..f658309612ef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nitrogen-som.dtsi
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Boundary Devices
+ * Copyright 2025 Collabora Ltd.
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Boundary Devices Nitrogen8M Plus Som";
+	compatible = "boundary,imx8mp-nitrogen-som", "fsl,imx8mp";
+
+	rfkill-bt {
+		compatible = "rfkill-gpio";
+		label = "rfkill-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill_bt>;
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	};
+
+	rfkill-wlan {
+		compatible = "rfkill-gpio";
+		label = "rfkill-wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill_wlan>;
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 15 GPIO_OPEN_DRAIN>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC (BUCK1)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3P3V (BUCK4)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1P8V (BUCK5)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "NVCC_DRAM_1P1V (BUCK6)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1600000>;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "VDDA_1V8 (LDO3)";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD1 (LDO5)";
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 17 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 19 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 GPIO_OPEN_DRAIN>;
+	sda-gpios = <&gpio5 21 GPIO_OPEN_DRAIN>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	status = "okay";
+};
+
+&usdhc3 {
+	bus-width = <8>;
+	non-removable;
+	no-mmc-hs400;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x20
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0xa0
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+
+			MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02				0x10
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x100
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1c3
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x1c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x1c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x41
+		>;
+	};
+
+	pinctrl_rfkill_bt: rfkill-btgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x119
+		>;
+	};
+
+	pinctrl_rfkill_wlan: rfkill-wlangrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x16
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x10
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x150
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x150
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x150
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x150
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x150
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x150
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x150
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x150
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x150
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x140
+
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x14
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x154
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x154
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x154
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x154
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x154
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x154
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x154
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x154
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x154
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x12
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x152
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x152
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x152
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x152
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x152
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x152
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x152
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x152
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x152
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi
new file mode 100644
index 000000000000..f269f7a004fc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Pengutronix, Ahmad Fatoum <kernel@pengutronix.de>
+ */
+
+&clk {
+	assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+			  <&clk IMX8MP_CLK_A53_CORE>,
+			  <&clk IMX8MP_SYS_PLL3>,
+			  <&clk IMX8MP_CLK_NOC>,
+			  <&clk IMX8MP_CLK_NOC_IO>,
+			  <&clk IMX8MP_CLK_GIC>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_ARM_PLL_OUT>,
+				 <0>,
+				 <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL3_OUT>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <0>, <0>,
+			       <600000000>,
+			       <800000000>,
+			       <600000000>,
+			       <400000000>;
+	fsl,operating-mode = "nominal";
+};
+
+&gpu2d {
+	assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <800000000>;
+};
+
+&gpu3d {
+	assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>,
+			  <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <800000000>, <800000000>;
+};
+
+&pgc_hdmimix {
+	assigned-clocks = <&clk IMX8MP_CLK_HDMI_AXI>,
+			  <&clk IMX8MP_CLK_HDMI_APB>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_133M>;
+	assigned-clock-rates = <400000000>, <133000000>;
+};
+
+&pgc_hsiomix {
+	assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <400000000>;
+};
+
+&pgc_gpumix {
+	assigned-clocks = <&clk IMX8MP_CLK_GPU_AXI>,
+			  <&clk IMX8MP_CLK_GPU_AHB>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL3_OUT>,
+				 <&clk IMX8MP_SYS_PLL3_OUT>;
+	assigned-clock-rates = <600000000>, <300000000>;
+};
+
+&pgc_mlmix {
+	assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+			  <&clk IMX8MP_CLK_ML_AXI>,
+			  <&clk IMX8MP_CLK_ML_AHB>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <800000000>,
+			       <800000000>,
+			       <300000000>;
+};
+
+&media_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
+			  <&clk IMX8MP_CLK_MEDIA_APB>,
+			  <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
+			  <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+			  <&clk IMX8MP_CLK_MEDIA_ISP>,
+			  <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_SYS_PLL1_800M>,
+				 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+				 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+				 <&clk IMX8MP_SYS_PLL1_800M>;
+	assigned-clock-rates = <400000000>, <200000000>,
+			       <0>, <0>, <400000000>,
+			       <1039500000>;
+};
+
+&vpu_g1 {
+	assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
+	assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+	assigned-clock-rates = <600000000>;
+};
+
+&vpu_g2 {
+	assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+	assigned-clock-rates = <500000000>;
+};
+
+&vpumix_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_VPU_PLL>, <&clk IMX8MP_CLK_VPU_BUS>;
+	assigned-clock-parents = <0>, <&clk IMX8MP_VPU_PLL_OUT>;
+	assigned-clock-rates = <600000000>, <600000000>;
+};
+
+/delete-node/ &{noc_opp_table/opp-1000000000};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-etml1010g3dra.dtso
new file mode 100644
index 000000000000..7a7f27d6bb1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-etml1010g3dra.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_lvds1 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm3 0 50000 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <0>, <506800000>;
+	status = "okay";
+};
+
+&panel_lvds1 {
+	compatible = "edt,etml1010g3dra";
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso
new file mode 100644
index 000000000000..aceb5b6056ef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include "imx8mp-phyboard-pollux-peb-av-10.dtsi"
+
+&backlight_lvds0 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm4 0 50000 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <0>, <506800000>;
+	status = "okay";
+};
+
+&panel_lvds0 {
+	compatible = "edt,etml1010g3dra";
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso
new file mode 100644
index 000000000000..559286f384be
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include "imx8mp-phyboard-pollux-peb-av-10.dtsi"
+
+&backlight_lvds0 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm4 0 66667 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 66.5 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 66.5 * 7 = 465.5 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 66.5 MHz.
+	 */
+	assigned-clock-rates = <0>, <465500000>;
+	status = "okay";
+};
+
+&panel_lvds0 {
+	compatible = "powertip,ph128800t006-zhc01";
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi
new file mode 100644
index 000000000000..bb740f845855
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	backlight_lvds0: backlight0 {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		pinctrl-names = "default";
+		power-supply = <&reg_vcc_12v>;
+		status = "disabled";
+	};
+
+	panel_lvds0: panel-lvds0 {
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_vcc_3v3_sw>;
+		status = "disabled";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_vcc_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VCC_12V";
+	};
+
+	reg_vcc_1v8_audio: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VCC_1V8_Audio";
+	};
+
+	reg_vcc_3v3_analog: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_3V3_Analog";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "snd-peb-av-10";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <32>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Speaker", "Speaker",
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"MIC3R", "Microphone Jack",
+			"Microphone Jack", "Mic Bias";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clk IMX8MP_CLK_SAI2>;
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	codec: codec@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		pinctrl-0 = <&pinctrl_tlv320>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+		ai3x-gpio-func = <0xd 0x0>;
+		ai3x-micbias-vg = <2>;
+		AVDD-supply = <&reg_vcc_3v3_analog>;
+		DRVDD-supply = <&reg_vcc_3v3_analog>;
+		DVDD-supply = <&reg_vcc_1v8_audio>;
+		IOVDD-supply = <&reg_vcc_3v3_sw>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc_3v3_sw>;
+	};
+};
+
+&ldb_lvds_ch0 {
+	remote-endpoint = <&panel0_in>;
+};
+
+&pwm4 {
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+};
+
+&sai2 {
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>,
+		 <&clk IMX8MP_CLK_DUMMY>,
+		 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>,
+		 <&clk IMX8MP_CLK_DUMMY>,
+		 <&clk IMX8MP_CLK_DUMMY>,
+		 <&clk IMX8MP_AUDIO_PLL1_OUT>,
+		 <&clk IMX8MP_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k",
+		      "pll11k";
+	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x1e2
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x1e2
+		>;
+	};
+
+	pinctrl_lvds0: lvds0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01	0x12
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT	0x12
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
+			MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
+		>;
+	};
+
+	pinctrl_tlv320: tlv320grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x16
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x16
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtso
new file mode 100644
index 000000000000..95078618ee09
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtso
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "imx8mp-phyboard-pollux-peb-av-10.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-ph128800t006.dtso
new file mode 100644
index 000000000000..a39f83bf8204
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-ph128800t006.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_lvds1 {
+	brightness-levels = <0 8 16 32 64 128 255>;
+	default-brightness-level = <8>;
+	enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+	num-interpolated-steps = <2>;
+	pwms = <&pwm3 0 66667 0>;
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/*
+	 * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to
+	 * 66.5 * 7 = 465.5 MHz so the LDB serializer and LCDIFv3 scanout
+	 * engine can reach accurate pixel clock of exactly 66.5 MHz.
+	 */
+	assigned-clock-rates = <0>, <465500000>;
+	status = "okay";
+};
+
+
+&panel_lvds1 {
+	compatible = "powertip,ph128800t006-zhc01";
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 436152308642..9687b4ded8f4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -1,14 +1,12 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2020 PHYTEC Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
  */
 
 /dts-v1/;
 
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/leds/leds-pca9532.h>
-#include <dt-bindings/pwm/pwm.h>
 #include <dt-bindings/thermal/thermal.h>
 #include "imx8mp-phycore-som.dtsi"
 
@@ -21,16 +19,12 @@
 		stdout-path = &uart1;
 	};
 
-	backlight_lvds: backlight {
+	backlight_lvds1: backlight1 {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lvds1>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <11>;
-		enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
-		num-interpolated-steps = <2>;
+		pinctrl-names = "default";
 		power-supply = <&reg_lvds1_reg_en>;
-		pwms = <&pwm3 0 50000 0>;
+		status = "disabled";
 	};
 
 	fan0: fan {
@@ -43,10 +37,11 @@
 		#cooling-cells = <2>;
 	};
 
-	panel1_lvds: panel-lvds {
-		compatible = "edt,etml1010g3dra";
-		backlight = <&backlight_lvds>;
+	panel_lvds1: panel-lvds1 {
+		/* compatible panel in overlay */
+		backlight = <&backlight_lvds1>;
 		power-supply = <&reg_vcc_3v3_sw>;
+		status = "disabled";
 
 		port {
 			panel1_in: endpoint {
@@ -232,32 +227,8 @@
 	};
 };
 
-&lcdif2 {
-	status = "okay";
-};
-
-&lvds_bridge {
-	status = "okay";
-
-	ports {
-		port@2 {
-			ldb_lvds_ch1: endpoint {
-				remote-endpoint = <&panel1_in>;
-			};
-		};
-	};
-};
-
-&media_blk_ctrl {
-	/*
-	 * The LVDS panel on this device uses 72.4 MHz pixel clock,
-	 * set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB
-	 * serializer and LCDIFv3 scanout engine can reach accurate
-	 * pixel clock of exactly 72.4 MHz.
-	 */
-	assigned-clock-rates = <500000000>, <200000000>,
-			       <0>, <0>, <500000000>,
-			       <506800000>;
+&ldb_lvds_ch1 {
+	remote-endpoint = <&panel1_in>;
 };
 
 &snvs_pwrkey {
@@ -282,9 +253,8 @@
 };
 
 &pwm3 {
-	status = "okay";
-	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
+	pinctrl-names = "default";
 };
 
 &rv3028 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi
new file mode 100644
index 000000000000..8b0e8cf86cad
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-fpsc.dtsi
@@ -0,0 +1,796 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	compatible = "phytec,imx8mp-phycore-fpsc", "fsl,imx8mp";
+	model = "PHYTEC phyCORE-i.MX8MP FPSC";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x80000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		 compatible = "regulator-fixed";
+		 off-on-delay-us = <12000>;
+		 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		 pinctrl-names = "default";
+		 regulator-max-microvolt = <3300000>;
+		 regulator-min-microvolt = <3300000>;
+		 regulator-name = "VDDSW_SD2";
+		 startup-delay-us = <100>;
+		 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		 enable-active-high;
+	 };
+
+	reg_vdd_io: regulator-vdd-io {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_IO";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 { /* FPSC SPI1 */
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+};
+
+&ecspi2 { /* FPSC SPI2 */
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+};
+
+&ecspi3 { /* FPSC SPI3 */
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	pinctrl-names = "default";
+};
+
+&eqos { /* FPSC RGMII2 */
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+};
+
+&fec { /* FPSC GB_ETH1 */
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-names = "default";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		};
+	};
+};
+
+&flexcan1 { /* FPSC CAN1 */
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 { /* FPSC CAN2 */
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&flexspi { /* FPSC QSPI */
+	pinctrl-0 = <&pinctrl_flexspi>;
+	pinctrl-names = "default";
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "PCIE1_nPERST";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "SD2_RESET_B";
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "I2C6_SCL",
+			  "I2C6_SDA", "I2C5_SCL";
+};
+
+&gpio4 { /* FPSC GPIO */
+	gpio-line-names = "GPIO6", "RGMII2_nINT", "GPIO7", "GPIO4", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "X_PMIC_IRQ_B", "",
+			  "", "GPIO5", "", "", "RGMII2_EVENT_OUT",
+			  "", "", "RGMII2_EVENT_IN";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	pinctrl-names = "default";
+};
+
+&gpio5 { /* FPSC GPIO */
+	gpio-line-names = "", "", "", "", "I2C5_SDA",
+			  "GPIO1", "", "", "", "SPI1_CS",
+			  "", "", "", "SPI2_CS", "I2C1_SCL",
+			  "I2C1_SDA", "I2C2_SCL", "I2C2_SDA", "I2C3_SCL", "I2C3_SDA",
+			  "", "GPIO2", "", "", "SPI3_CS",
+			  "", "GPIO3";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	pinctrl-names = "default";
+};
+
+&i2c1 { /* FPSC I2C1 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "VDD_SOC (BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "VDD_3V3 (BUCK4)";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDD_1V8 (BUCK5)";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "NVCC_DRAM_1V1 (BUCK6)";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
+			};
+
+			ldo3: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDDA_1V8 (LDO3)";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SD2 (LDO5)";
+			};
+		};
+	};
+
+	/* User EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vdd_io>;
+	};
+
+	/* factory EEPROM */
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+		read-only;
+		vcc-supply = <&reg_vdd_io>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&i2c2 { /* FPSC I2C2 */
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 { /* FPSC I2C3 */
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c5 { /* FPSC I2C4 */
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c6 { /* FPSC I2C5 */
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&iomuxc {
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__CAN1_TX		0x154	/* CAN1_TX */
+			MX8MP_IOMUXC_SAI2_TXC__CAN1_RX		0x154	/* CAN1_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: can2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX		0x154	/* CAN2_TX */
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX		0x154	/* CAN2_RX */
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01				0x10	/* RGMII2_nINT */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27				0x10	/* RGMII2_EVENT_IN */
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24				0x10	/* RGMII2_EVENT_OUT */
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2	/* RGMII2_MDIO */
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2	/* RGMII2_MDC */
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x12	/* RGMII2_TX_D3 */
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x12	/* RGMII2_TX_D2 */
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x12	/* RGMII2_TX_D1 */
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x12	/* RGMII2_TX_D0 */
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x12	/* RGMII2_TX_CTL */
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x12	/* RGMII2_TXC */
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90	/* RGMII2_RX_D3 */
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90	/* RGMII2_RX_D2 */
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90	/* RGMII2_RX_D1 */
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90	/* RGMII2_RX_D0 */
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90	/* RGMII2_RX_CTL */
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90	/* RGMII2_RXC */
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x140
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x12
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x12
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x14
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x14
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x14
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x14
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82	/* QSPI_CE */
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2	/* QSPI_CLK */
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82	/* QSPI_DATA_0 */
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82	/* QSPI_DATA_1 */
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82	/* QSPI_DATA_2 */
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82	/* QSPI_DATA_3 */
+			MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS		0x82	/* QSPI_DQS */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x40	/* GPIO4 */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x106	/* GPIO5 */
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x106	/* GPIO6 */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x106	/* GPIO7 */
+		>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x106	/* GPIO1 */
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x106	/* GPIO2 */
+			MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26	0x106	/* GPIO3 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x106	/* HDMI_CEC */
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x106	/* HDMI_SCL */
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x106	/* HDMI_SDA */
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x106	/* HDMI_HPD */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e2
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e2
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2	/* I2C1_SDA_DNU */
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2	/* I2C1_SCL_DNU */
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1e2
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1e2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2	/* I2C2_SDA */
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2	/* I2C2_SCL */
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x1e2
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x1e2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2	/* I2C3_SDA */
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2	/* I2C3_SCL */
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04	0x1e2
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x1e2
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001c2	/* I2C4_SDA */
+			MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL	0x400001c2	/* I2C4_SCL */
+		>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x1e2
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x1e2
+		>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c2	/* I2C5_SDA */
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL	0x400001c2	/* I2C5_SCL */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x10	/* PCIE1_nCLKREQ */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08     0x40	/* PCIE1_nPERST */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x140
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x106	/* PWM1 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT	0x106	/* PWM2 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT		0x106	/* PWM3 */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT	0x106	/* PWM4 */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19    0x40
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK	0x106	/* SAI1_MCLK */
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC	0x106	/* SAI1_RX_SYNC */
+			MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK	0x106	/* SAI1_RX_BCLK */
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00	0x106	/* SAI1_RX_DATA */
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0x106	/* SAI1_TX_SYNC */
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0x106	/* SAI1_TX_BCLK */
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00	0x106	/* SAI1_TX_DATA */
+		>;
+	};
+
+	pinctrl_ecspi1: spi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82	/* SPI1_SCLK */
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82	/* SPI1_MOSI */
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82	/* SPI1_MISO */
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x106	/* SPI1_CS */
+		>;
+	};
+
+	pinctrl_ecspi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x82	/* SPI2_SCLK */
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x82	/* SPI2_MOSI */
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x82	/* SPI2_MISO */
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x106     /* SPI2_CS */
+		>;
+	};
+
+	pinctrl_ecspi3: spi3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK	0x82	/* SPI3_SCLK */
+			MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI	0x82	/* SPI3_MOSI */
+			MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO	0x82	/* SPI3_MISO */
+			MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24	0x106     /* SPI3_CS */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX	0x140	/* UART2_RXD */
+			MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX	0x140	/* UART2_TXD */
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS	0x140	/* UART2_RTS */
+			MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS	0x140	/* UART2_CTS */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX	0x140	/* UART1_RXD */
+			MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX	0x140	/* UART1_TXD */
+			MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS	0x140	/* UART1_RTS */
+			MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS	0x140	/* UART1_CTS */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140	/* UART3_RXD */
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140	/* UART3_TXD */
+		>;
+	};
+
+	pinctrl_usb0: usb0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR	0x106	/* USB1_PWR_EN */
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x106	/* USB1_OC */
+			MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID	0x106	/* USB1_ID */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x106	/* USB2_PWR_EN */
+			MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC	0x106	/* USB2_OC */
+			MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID	0x106	/* USB2_ID */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP	0x106	/* SDIO_WP */
+			MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B	0x106	/* SDIO_CD */
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x106	/* SDIO_CLK */
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x106	/* SDIO_CLK */
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x106	/* SDIO_DATA0 */
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x106	/* SDIO_DATA1 */
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x106	/* SDIO_DATA2 */
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x106	/* SDIO_DATA3 */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B	0x40	/* SDCARD_CD */
+			MX8MP_IOMUXC_SD2_WP__USDHC2_WP		0x40	/* SDCARD_WP */
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196	/* SDCARD_CLK */
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6	/* SDCARD_CMD */
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6	/* SDCARD_DATA0 */
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6	/* SDCARD_DATA1 */
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6	/* SDCARD_DATA2 */
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6	/* SDCARD_DATA3 */
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d2
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xe6
+		>;
+	};
+};
+
+&pcie { /* FPSC PCIE1 */
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+};
+
+&pwm1 { /* FPSC PWM1 */
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&pwm2 { /* FPSC PWM2 */
+	pinctrl-0 = <&pinctrl_pwm2>;
+	pinctrl-names = "default";
+};
+
+&pwm3 { /* FPSC PWM3 */
+	pinctrl-0 = <&pinctrl_pwm3>;
+	pinctrl-names = "default";
+};
+
+&pwm4 { /* FPSC PWM4 */
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+};
+
+&sai5 { /* FPSC SAI1 */
+	pinctrl-0 = <&pinctrl_sai5>;
+	pinctrl-names = "default";
+};
+
+&uart2 { /* FPSC UART2 */
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	fsl,dte-mode;
+};
+
+&uart3 { /* FPSC UART1 */
+	pinctrl-0 = <&pinctrl_uart3>;
+	pinctrl-names = "default";
+	fsl,dte-mode;
+};
+
+&uart4 { /* FPSC UART3 */
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+};
+
+&usb3_0 { /* FPSC USB1 */
+	pinctrl-0 = <&pinctrl_usb0>;
+	pinctrl-names = "default";
+};
+
+&usb3_1 { /* FPSC USB2 */
+	pinctrl-0 = <&pinctrl_usb1>;
+	pinctrl-names = "default";
+};
+
+&usdhc1 { /* FPSC SDIO */
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default";
+};
+
+&usdhc2 { /* FPSC SDCARD */
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	sd-uhs-sdr104;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index 04f724c6ec21..88831c0fbb7b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -1,7 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2020 PHYTEC Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
  */
 
 #include <dt-bindings/net/ti-dp83867.h>
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
index 0fef066471ba..16f5899de415 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
@@ -6,6 +6,39 @@
 #ifndef __DTS_IMX8MP_PINFUNC_H
 #define __DTS_IMX8MP_PINFUNC_H
 
+/* Drive Strength */
+#define MX8MP_DSE_X1		0x0
+#define MX8MP_DSE_X2		0x4
+#define MX8MP_DSE_X4		0x2
+#define MX8MP_DSE_X6		0x6
+
+/* Slew Rate */
+#define MX8MP_FSEL_FAST		0x10
+#define MX8MP_FSEL_SLOW		0x0
+
+/* Open Drain */
+#define MX8MP_ODE_ENABLE	0x20
+#define MX8MP_ODE_DISABLE	0x0
+
+#define MX8MP_PULL_DOWN		0x0
+#define MX8MP_PULL_UP		0x40
+
+/* Hysteresis */
+#define MX8MP_HYS_CMOS		0x0
+#define MX8MP_HYS_SCHMITT	0x80
+
+#define MX8MP_PULL_ENABLE	0x100
+#define MX8MP_PULL_DISABLE	0x0
+
+/* SION force input mode */
+#define MX8MP_SION		0x40000000
+
+/* long defaults */
+#define MX8MP_USDHC_DATA_DEFAULT (MX8MP_FSEL_FAST | MX8MP_PULL_UP | \
+				  MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+#define MX8MP_I2C_DEFAULT (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | \
+			   MX8MP_PULL_ENABLE | MX8MP_SION)
+
 /*
  * The pin function ID is a tuple of
  * <mux_reg conf_reg input_reg mux_mode input_val>
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts b/arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts
new file mode 100644
index 000000000000..30616218017b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Protonic Holland
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Protonic PRT8ML";
+	compatible = "prt,prt8ml", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	pcie_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie_refclk_oe: pcie0-refclk-oe {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_refclk>;
+		clocks = <&pcie_refclk>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&fan53555>;
+};
+
+&A53_1 {
+	cpu-supply = <&fan53555>;
+};
+
+&A53_2 {
+	cpu-supply = <&fan53555>;
+};
+
+&A53_3 {
+	cpu-supply = <&fan53555>;
+};
+
+&a53_opp_table {
+	opp-1200000000 {
+		opp-microvolt = <900000>;
+	};
+
+	opp-1600000000 {
+		opp-microvolt = <980000>;
+	};
+
+	/* Power supply insuffient for 1.8 GHz */
+	/delete-node/ opp-1800000000;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+
+	/* Disable DMA to meet performance requirements */
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	switch@0 {
+		compatible = "nxp,sja1105q";
+		reg = <0>;
+		reset-gpios = <&gpio_exp_1 4 GPIO_ACTIVE_LOW>;
+		spi-cpha;
+		spi-max-frequency = <4000000>;
+		spi-rx-delay-us = <1>;
+		spi-tx-delay-us = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@3 {
+				reg = <3>;
+				label = "rj45";
+				phy-handle = <&rj45_phy>;
+				phy-mode = "rgmii-id";
+			};
+
+			port@4 {
+				reg = <4>;
+				ethernet = <&fec>;
+				label = "cpu";
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
+
+				/* Unreliable at 1000Mbps, limit RGMII to 100Mbps */
+				fixed-link {
+					full-duplex;
+					speed = <100>;
+				};
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii"; /* switch inserts delay */
+	rx-internal-delay-ps = <0>;
+	tx-internal-delay-ps = <0>;
+	status = "okay";
+
+	fixed-link {
+		full-duplex;
+		speed = <100>;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rj45_phy: ethernet-phy@2 {
+			reg = <2>;
+			reset-gpios = <&gpio_exp_1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	ak5558: codec@10 {
+		compatible = "asahi-kasei,ak5558";
+		reg = <0x10>;
+		reset-gpios = <&gpio_exp_1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio_exp_1: gpio@25 {
+		compatible = "nxp,pca9571";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	tps65987ddh_0: usb-pd@20 {
+		compatible = "ti,tps6598x";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tps65987ddh_0>;
+		interrupts-extended = <&gpio1 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	gpio_exp_2: gpio@25 {
+		compatible = "nxp,pca9571";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		c0-hreset-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			line-name = "c0-hreset";
+			output-low;
+		};
+
+		c1-hreset-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			line-name = "c1-hreset";
+			output-low;
+		};
+	};
+
+	fan53555: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan53555>;
+		regulator-name = "fan53555";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <980000>;
+		regulator-always-on;
+		regulator-boot-on;
+		fcs,suspend-voltage-selector = <1>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	ak4458: codec@11 {
+		compatible = "asahi-kasei,ak4458";
+		reg = <0x11>;
+		#sound-dai-cells = <0>;
+		reset-gpios = <&gpio_exp_2 5 GPIO_ACTIVE_LOW>;
+	};
+
+	tps65987ddh_1: usb-pd@20 {
+		compatible = "ti,tps6598x";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tps65987ddh_1>;
+		interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <100000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x154
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x154
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x154
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x154
+		>;
+	};
+
+	pinctrl_fan53555: fan53555grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x114
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX		0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX		0x154
+			MX8MP_IOMUXC_UART3_RXD__CAN2_TX		0x154
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL	0x400000c3
+			MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA	0x400000c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400000c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400000c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400000c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400000c3
+		>;
+	};
+
+	pinctrl_pcie_refclk: pcierefclkgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23	0xc6
+		>;
+	};
+
+	pinctrl_tps65987ddh_0: tps65987ddh-0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x1d0
+		>;
+	};
+
+	pinctrl_tps65987ddh_1: tps65987ddh-1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15	0x1d0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x040
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x040
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x0d4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dts
new file mode 100644
index 000000000000..5a2629f3567c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU basic/fallback";
+	compatible = "skov,imx8mp-skov-basic", "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
index 59813ef8e2bb..020f20c8ce66 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
 
 #include "imx8mp.dtsi"
+#include "imx8mp-nominal.dtsi"
 
 #include <dt-bindings/leds/common.h>
 
@@ -116,6 +117,11 @@
 		regulator-name = "24V";
 		regulator-min-microvolt = <24000000>;
 		regulator-max-microvolt = <24000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg24v>;
+		interrupts-extended = <&gpio4 23 IRQ_TYPE_EDGE_FALLING>;
+		system-critical-regulator;
+		regulator-uv-less-critical-window-ms = <50>;
 	};
 
 	reg_can2rs: regulator-can2rs {
@@ -163,6 +169,19 @@
 	};
 };
 
+/*
+ * Board is passively cooled and heatsink is specced for continuous operation
+ * at 1.2 GHz only. Short bouts of 1.6 GHz are ok, but these should be done
+ * intentionally, not as part of suspend/resume cycles.
+ */
+&{/opp-table/opp-1600000000} {
+	/delete-property/ opp-suspend;
+};
+
+&{/opp-table/opp-1800000000} {
+	/delete-property/ opp-suspend;
+};
+
 &A53_0 {
 	cpu-supply = <&reg_vdd_arm>;
 };
@@ -197,7 +216,7 @@
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-rxid";
 	status = "okay";
 
 	fixed-link {
@@ -222,8 +241,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@25 {
@@ -232,13 +254,12 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		regulators {
 			reg_vdd_soc: BUCK1 {
 				regulator-name = "VDD_SOC";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
 				vin-supply = <&reg_5v_p>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -247,20 +268,20 @@
 
 			reg_vdd_arm: BUCK2 {
 				regulator-name = "VDD_ARM";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
 				vin-supply = <&reg_5v_p>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
-				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-run-voltage = <850000>;
 				nxp,dvs-standby-voltage = <850000>;
 			};
 
 			reg_vdd_3v3: BUCK4 {
 				regulator-name = "VDD_3V3";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				vin-supply = <&reg_5v_p>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -268,8 +289,8 @@
 
 			reg_vdd_1v8: BUCK5 {
 				regulator-name = "VDD_1V8";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 				vin-supply = <&reg_5v_p>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -277,8 +298,8 @@
 
 			reg_nvcc_dram_1v1: BUCK6 {
 				regulator-name = "NVCC_DRAM_1V1";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
 				vin-supply = <&reg_5v_p>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -286,8 +307,8 @@
 
 			reg_nvcc_snvs_1v8: LDO1 {
 				regulator-name = "NVCC_SNVS_1V8";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 				vin-supply = <&reg_5v_p>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -295,8 +316,8 @@
 
 			reg_vdda_1v8: LDO3 {
 				regulator-name = "VDDA_1V8";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 				vin-supply = <&reg_5v_p>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -314,10 +335,21 @@
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
 &i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	i2c_rtc: rtc@51 {
@@ -332,8 +364,11 @@
 
 &i2c4 {
 	clock-frequency = <380000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	switch: switch@5f {
@@ -391,6 +426,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
+	/*
+	 * While there is no CTS line, the property "uart-has-rtscts" is still
+	 * the right thing to do to enable the UART to do RS485. In RS485-Mode
+	 * CTS isn't used anyhow and there is no dedicated property
+	 * "uart-has-rts-but-no-cts".
+	 */
+	uart-has-rtscts;
 };
 
 &uart2 {
@@ -538,6 +580,27 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14			0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16			0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17			0x400001c2
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL				0x400001c2
@@ -545,6 +608,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18			0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19			0x400001c2
+		>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL				0x400001c3
@@ -552,10 +622,16 @@
 		>;
 	};
 
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21			0x400001c3
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03			0x41
-			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04			0x41
 		>;
 	};
 
@@ -571,6 +647,12 @@
 		>;
 	};
 
+	pinctrl_reg24v: reg24vgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23			0x154
+		>;
+	};
+
 	pinctrl_reg_vsd_3v3: regvsd3v3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
@@ -605,6 +687,8 @@
 			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX			0x140
 			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX			0x140
 			MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS			0x140
+			/* CTS pin is not connected, but needed as workaround */
+			MX8MP_IOMUXC_UART3_TXD__UART1_DTE_CTS			0x140
 		>;
 	};
 
@@ -623,6 +707,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d0
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d0
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT			0xc0
 		>;
 	};
 
@@ -634,6 +719,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d4
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d4
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT			0xc0
 		>;
 	};
 
@@ -645,6 +731,7 @@
 			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d6
 			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d6
 			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT			0xc0
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
index c1ca69da3cb8..32a429437cbd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
@@ -9,12 +9,53 @@
 	compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl_hdmi: hdmigrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL		0x1c3
-			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA		0x1c3
 			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD			0x19
 		>;
 	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL			0x400001c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26			0x400001c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27			0x400001c2
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
index ccbd3abedd69..e602c1c96143 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
@@ -8,6 +8,45 @@
 	model = "SKOV IMX8MP CPU revB - LT6";
 	compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp";
 
+	lvds-decoder {
+		compatible = "ti,sn65lvds822", "lvds-decoder";
+		power-supply = <&reg_3v3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				in_lvds1: endpoint {
+					data-mapping = "vesa-24";
+					remote-endpoint = <&ldb_lvds_ch1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_decoder_out>;
+			};
+		};
+	};
+
 	touchscreen {
 		compatible = "resistive-adc-touch";
 		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
@@ -44,7 +83,7 @@
 		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_touch>;
-		pinctrl-names ="default";
+		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
 		interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
 		#io-channel-cells = <1>;
@@ -78,6 +117,27 @@
 	};
 };
 
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <462000000>;
+	status = "okay";
+
+	ports {
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&in_lvds1>;
+			};
+		};
+	};
+};
+
 &pwm1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
index 30962922b361..45c9a6d55bc9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
@@ -27,8 +27,6 @@
 
 &i2c2 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
 	touchscreen@38 {
@@ -51,8 +49,11 @@
 };
 
 &lvds_bridge {
-	/* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
-	assigned-clock-rates = <482300000>;
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <980000000>;
 	status = "okay";
 
 	ports {
@@ -64,18 +65,6 @@
 	};
 };
 
-&media_blk_ctrl {
-	/* currently it is not possible to let display clocks confugure
-	 * automatically, so we need to set them manually
-	 */
-	assigned-clock-rates = <500000000>, <200000000>, <0>,
-		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
-		<68900000>,
-		<500000000>,
-		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
-		<964600000>;
-};
-
 &pwm4 {
 	status = "okay";
 };
@@ -90,12 +79,3 @@
 	voltage-table = <3160000 73>;
 	status = "okay";
 };
-
-&iomuxc {
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL				0x400001c2
-			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA				0x400001c2
-		>;
-	};
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-bd500.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-bd500.dts
new file mode 100644
index 000000000000..b816c6cd3bca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-bd500.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revC - bd500";
+	compatible = "skov,imx8mp-skov-revc-bd500", "fsl,imx8mp";
+
+	leds {
+		led_system_red: led-3 {
+			label = "bd500:system:red";
+			color = <LED_COLOR_ID_RED>;
+			/* Inverted compared to others due to NMOS inverter */
+			gpios = <&gpioexp 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led_system_green: led-4 {
+			label = "bd500:system:green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioexp 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led_lan1_red: led-5 {
+			label = "bd500:lan1:act";
+			color = <LED_COLOR_ID_RED>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lan1_green: led-6 {
+			label = "bd500:lan1:link";
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lan2_red: led-7 {
+			label = "bd500:lan2:act";
+			color = <LED_COLOR_ID_RED>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led_lan2_green: led-8 {
+			label = "bd500:lan2:link";
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "netdev";
+			gpios = <&gpioexp 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-1 {
+			label = "S1";
+			linux,code = <KEY_CONFIG>;
+			gpios = <&gpioexp 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	gpioexp: gpio@20 {
+		compatible = "nxp,pca6408";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_exp>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vdd_3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_exp: gpioexpgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x0
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-hdmi.dts
new file mode 100644
index 000000000000..c263e8fd0484
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-hdmi.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "imx8mp-skov-revb-hdmi.dts"
+
+/ {
+	model = "SKOV IMX8MP CPU revC - HDMI";
+	compatible = "skov,imx8mp-skov-revc-hdmi", "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts
new file mode 100644
index 000000000000..3e320d6dea3a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revC - JuTouch JT101TM023";
+	compatible = "skov,imx8mp-skov-revc-jutouch-jt101tm023", "fsl,imx8mp";
+
+	panel {
+		compatible = "jutouch,jt101tm023";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@2a {
+		compatible = "eeti,exc81w32", "eeti,exc80h84";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		vdd-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+	assigned-clock-rates = <0>, <506800000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts
new file mode 100644
index 000000000000..9a562c011f2c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-tian-g07017.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revC - TIAN G07017";
+	compatible = "skov,imx8mp-skov-revc-tian-g07017", "fsl,imx8mp";
+
+	panel {
+		compatible = "topland,tian-g07017-01";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+		vcc-supply = <&reg_vdd_3v3>;
+		iovcc-supply = <&reg_vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <358400000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
new file mode 100644
index 000000000000..4e6629f940bf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP SoM";
+	compatible = "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	chosen {
+		bootargs = "earlycon=ec_imx6q,0x30890000,115200";
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	v_3_3: regulator-3-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+/*
+ * Reserve all physical memory from within the first 1GB of DDR address
+ * space to avoid panic on low memory systems.
+ */
+&dsp_reserved {
+	reg = <0 0x6f000000 0 0x1000000>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqos_pins>, <&phy0_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fec_pins>, <&phy1_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-1 = <&i2c1_gpio_pins>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-0 = <&pmic_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+		nxp,i2c-lt-enable;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	som_eeprom: eeprom@50{
+		compatible = "st,24c01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_gpio_pins>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-1 = <&i2c3_gpio_pins>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	/* routed to basler camera connector */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&i2c4_gpio_pins>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&iomuxc {
+	eqos_pins: pinctrl-eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+		>;
+	};
+
+	fec_pins: pinctrl-fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+		>;
+	};
+
+	i2c1_pins: pinctrl-i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c3
+		>;
+	};
+
+	i2c1_gpio_pins: pinctrl-i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x400001c3
+		>;
+	};
+
+	i2c2_pins: pinctrl-i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c3
+		>;
+	};
+
+	i2c2_gpio_pins: pinctrl-i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001c3
+		>;
+	};
+
+	i2c3_pins: pinctrl-i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c3
+		>;
+	};
+
+	i2c3_gpio_pins: pinctrl-i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x400001c3
+		>;
+	};
+
+	i2c4_pins: pinctrl-i2c4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
+		>;
+	};
+
+	i2c4_gpio_pins: pinctrl-i2c4-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21			0x400001c3
+		>;
+	};
+
+	phy0_pins: pinctrl-phy0-grp {
+		fsl,pins = <
+			/* RESET_N: weak i/o, open drain, external 1k pull-up */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x20
+			/* INT_N: weak i/o, open drain, internal pull-up */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x160
+		>;
+	};
+
+	phy1_pins: pinctrl-phy-1-grp {
+		fsl,pins = <
+			/* RESET_N: weak i/o, open drain, external 1k pull-up */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x20
+			/* INT_N: weak i/o, open drain, internal pull-up */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x160
+		>;
+	};
+
+	pmic_pins: pinctrl-pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
+		>;
+	};
+
+	uart1_pins: pinctrl-uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS		0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS		0x140
+			/* BT_REG_ON */
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x0
+			/* BT_WAKE_DEV */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x0
+			/* BT_WAKE_HOST */
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x100
+		>;
+	};
+
+	uart2_pins: pinctrl-uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49
+		>;
+	};
+
+	usdhc1_pins: pinctrl-usdhc1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+			/* WL_REG_ON */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x0
+			/* WL_WAKE_HOST */
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x100
+		>;
+	};
+
+	usdhc1_100mhz_pins: pinctrl-usdhc1g-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+		>;
+	};
+
+	usdhc1_200mhz_pins: pinctrl-usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+		>;
+	};
+
+	usdhc3_pins: pinctrl-usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+		>;
+	};
+
+	usdhc3_100mhz_pins: pinctrl-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	usdhc3_200mhz_pins: pinctrl-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+		>;
+	};
+
+	wdog1_pins: pinctrl-wdog1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x140
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	uart-has-rtscts;
+	/* select 80MHz parent clock to support maximum baudrate 4Mbps */
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		/* Murata 1MW module supports max. 3M baud */
+		max-speed = <3000000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usdhc1_pins>;
+	pinctrl-1 = <&usdhc1_100mhz_pins>;
+	pinctrl-2 = <&usdhc1_200mhz_pins>;
+	vmmc-supply = <&v_3_3>;
+	vqmmc-supply = <&v_1_8>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc3_pins>;
+	pinctrl-1 = <&usdhc3_100mhz_pins>;
+	pinctrl-2 = <&usdhc3_200mhz_pins>;
+	vmmc-supply = <&v_3_3>;
+	vqmmc-supply = <&v_1_8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wdog1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts
new file mode 100644
index 000000000000..6f9dcd3a75c8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (C) 2025 Toradex */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx8mp-toradex-smarc.dtsi"
+
+/ {
+	model = "Toradex SMARC iMX8M Plus on Toradex SMARC Development Board";
+	compatible = "toradex,smarc-imx8mp-dev",
+		     "toradex,smarc-imx8mp",
+		     "fsl,imx8mp";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J64";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_carrier_1p8v: regulator-carrier-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-carrier 1V8";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "tdx-smarc-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+/* SMARC SPI0 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* SMARC GBE0 */
+&eqos {
+	status = "okay";
+};
+
+/* SMARC GBE1 */
+&fec {
+	status = "okay";
+};
+
+/* SMARC CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* SMARC CAN0 */
+&flexcan2 {
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio7>,
+		    <&pinctrl_gpio8>,
+		    <&pinctrl_gpio9>,
+		    <&pinctrl_gpio10>,
+		    <&pinctrl_gpio11>,
+		    <&pinctrl_gpio12>,
+		    <&pinctrl_gpio13>;
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>, <&pinctrl_gpio6>;
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+/* SMARC HDMI */
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+/* SMARC I2C_LCD */
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* I2C on DSI Connector Pins 4/6 */
+		i2c_dsi_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* I2C on DSI Connector Pins 52/54 */
+		i2c_dsi_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* SMARC I2C_CAM0 */
+&i2c3 {
+	status = "okay";
+};
+
+/* SMARC I2C_GP */
+&i2c4 {
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1>, <&pinctrl_sai1_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_carrier_1p8v>;
+		CPVDD-supply = <&reg_carrier_1p8v>;
+		DBVDD-supply = <&reg_carrier_1p8v>;
+		DCVDD-supply = <&reg_carrier_1p8v>;
+		MICVDD-supply = <&reg_carrier_1p8v>;
+	};
+
+	/* On-Carrier Temperature Sensor */
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* On-Carrier EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* SMARC I2C_CAM1 */
+&i2c5 {
+	status = "okay";
+};
+
+/* SMARC I2C_PM */
+&i2c6 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* Fan controller */
+	fan_controller: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#pwm-cells = <2>;
+
+		fan {
+			cooling-levels = <255>;
+			pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+		};
+	};
+
+	/* Current measurement into module VDD */
+	hwmon@40 {
+		compatible = "ti,ina226";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+/* SMARC PCIE_A, M2 Key B */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* SMARC LCD1_BKLT_PWM */
+&pwm1 {
+	status = "okay";
+};
+
+/* SMARC LCD0_BKLT_PWM */
+&pwm2 {
+	status = "okay";
+};
+
+/* SMARC I2S0 */
+&sai1 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* SMARC HDMI Audio */
+&sound_hdmi {
+	status = "okay";
+};
+
+/* SMARC SER0, RS485. Optional M.2 KEY E */
+&uart1 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* SMARC SER2 */
+&uart2 {
+	status = "okay";
+};
+
+/* SMARC SER1, used as the Linux Console */
+&uart4 {
+	status = "okay";
+};
+
+/* SMARC USB0 */
+&usb3_0 {
+	status = "okay";
+};
+
+/* SMARC USB1..4 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* SMARC SDIO */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi
new file mode 100644
index 000000000000..bebe19eb360f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi
@@ -0,0 +1,1308 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (C) 2025 Toradex */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	aliases {
+		can0 = &flexcan2;
+		can1 = &flexcan1;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart4;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_id>;
+		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		label = "USB0";
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb0_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_0_dwc>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sleep>;
+
+		smarc_key_sleep: key-sleep {
+			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+			label = "SMARC_SLEEP#";
+			wakeup-source;
+			linux,code = <KEY_SLEEP>;
+		};
+
+		smarc_switch_lid: switch-lid {
+			gpios = <&som_ec_gpio_expander 2 GPIO_ACTIVE_LOW>;
+			label = "SMARC_LID#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_en_oc>;
+		gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "USB0_EN_OC#";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_en_oc>;
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "USB2_EN_OC#";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3V3_SD";
+		startup-delay-us = <20000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_USDHC_VSELECT";
+		vin-supply = <&reg_sd_3v3_1v8>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "CTRL_EN_WIFI";
+		startup-delay-us = <2000>;
+	};
+
+	reserved-memory {
+		linux,cma {
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x40000000 0 0x80000000>;
+		};
+	};
+
+	sound_hdmi: sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+/* SMARC SPI0 */
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio4 28 GPIO_ACTIVE_LOW>;
+};
+
+/* SMARC SPI1 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio4 3 GPIO_ACTIVE_LOW>,
+		   <&gpio3 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@2 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <2>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* SMARC GBE0 */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>,
+		    <&pinctrl_eth_mdio>,
+		    <&pinctrl_eqos_1588_event>;
+	phy-handle = <&eqos_phy>;
+	phy-mode = "rgmii-id";
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	mdio: mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+/* SMARC GBE1 */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_1588_event>;
+	phy-handle = <&fec_phy>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+};
+
+/* SMARC CAN1 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* SMARC CAN0 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	gpio-line-names = "SMARC_GPIO7", /* 0 */
+			  "SMARC_GPIO8",
+			  "",
+			  "PMIC_INT#",
+			  "PMIC_USDHC_VSELECT",
+			  "SMARC_GPIO9",
+			  "SMARC_GPIO10",
+			  "SMARC_GPIO11",
+			  "SMARC_GPIO12",
+			  "",
+			  "SMARC_GPIO5", /* 10 */
+			  "",
+			  "SMARC_USB0_EN_OC#",
+			  "SMARC_GPIO13",
+			  "SMARC_USB2_EN_OC#";
+};
+
+&gpio2 {
+	gpio-line-names = "", /* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "SMARC_SDIO_CD#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SDIO_PWR_EN",
+			  "SMARC_SDIO_WP"; /* 20 */
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds_dsi_sel>;
+	gpio-line-names = "ETH_0_INT#", /* 0 */
+			  "SLEEP#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "TPM_CS#",
+			  "LVDS_DSI_SEL",
+			  "MCU_INT#",
+			  "GPIO_EX_INT#",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SMB_ALERT#",
+			  "",
+			  "",
+			  "",
+			  "SMARC_I2C_PM_DAT", /* 20 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_I2C_PM_CK";
+};
+
+&gpio4 {
+	gpio-line-names = "SMARC_PCIE_WAKE#", /* 0 */
+			  "",
+			  "",
+			  "SMARC_SPI1_CS1#",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_GPIO4",
+			  "SMARC_PCIE_A_RST#",
+			  "", /* 20 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SPI0_CS1#",
+			  "SMARC_GPIO6";
+};
+
+&gpio5 {
+	gpio-line-names = "", /* 0 */
+			  "",
+			  "SMARC_USB0_OTG_ID",
+			  "SMARC_I2C_CAM1_CK",
+			  "SMARC_I2C_CAM1_DAT",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SPI0_CS0#",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "SMARC_SPI1_CS0#",
+			  "CTRL_I2C_SCL",
+			  "CTRL_I2C_SDA",
+			  "SMARC_I2C_LCD_CK",
+			  "SMARC_I2C_LCD_DAT",
+			  "SMARC_I2C_CAM0_CK",
+			  "SMARC_I2C_CAM0_DAT",
+			  "SMARC_I2C_GP_CK", /* 20 */
+			  "SMARC_I2C_GP_DAT";
+};
+
+/* SMARC HDMI */
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+};
+
+/* On-module I2C */
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+	status = "okay";
+
+	som_gpio_expander: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6408>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_GPIO0",
+			"SMARC_GPIO1",
+			"SMARC_GPIO2",
+			"SMARC_GPIO3",
+			"SMARC_LCD0_VDD_EN",
+			"SMARC_LCD0_BKLT_EN",
+			"SMARC_LCD1_VDD_EN",
+			"SMARC_LCD1_BKLT_EN";
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "+VDD_SOC (PMIC BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "+VDD_ARM (PMIC BUCK2)";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3 (PMIC BUCK4)";
+			};
+
+			reg_1v8: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8 (PMIC BUCK5)";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "+VDD_DDR (PMIC BUCK6)";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "+V1.8_SNVS (PMIC LDO1)";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8A (PMIC LDO3)";
+			};
+
+			LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3_ADC (PMIC LDO4)";
+			};
+
+			reg_sd_3v3_1v8: LDO5 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V3.3_1.8_SD (PMIC LDO5)";
+			};
+		};
+	};
+
+	embedded-controller@28 {
+		compatible = "toradex,smarc-imx8mp-ec", "toradex,smarc-ec";
+		reg = <0x28>;
+	};
+
+	som_ec_gpio_expander: gpio@29 {
+		compatible = "toradex,ecgpiol16", "nxp,pcal6416";
+		reg = <0x29>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcu_int>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_CHARGER_PRSNT#",
+			"SMARC_CHARGING#",
+			"SMARC_LID#",
+			"SMARC_BATLOW#";
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* SMARC I2C_LCD */
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_CAM0 */
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_GP */
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+/* SMARC I2C_CAM1 */
+&i2c5 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio5 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+/* SMARC I2C_PM */
+&i2c6 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	single-master;
+};
+
+&mdio {
+	eqos_phy: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+
+	fec_phy: ethernet-phy@2 {
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* SMARC PCIE_A */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
+
+/* SMARC LCD1_BKLT_PWM */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd1_bklt_pwm1>;
+};
+
+/* SMARC LCD0_BKLT_PWM */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd0_bklt_pwm2>;
+};
+
+/* SMARC GPIO5 as PWM */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5_pwm>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* SMARC SER0 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+};
+
+/* SMARC SER2 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* On-module Bluetooth, optional SMARC SER3 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bt_uart>;
+	uart-has-rtscts;
+	status = "okay";
+
+	som_bt: bluetooth {
+		compatible = "mrvl,88w8997";
+		max-speed = <921600>;
+	};
+};
+
+/* SMARC SER1, used as the Linux Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+/* SMARC USB0 */
+&usb3_0 {
+	fsl,disable-port-power-control;
+};
+
+/* SMARC USB1..4 */
+&usb3_1 {
+	fsl,disable-port-power-control;
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb1_vbus>;
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	maximum-speed = "high-speed";
+	srp-disable;
+	usb-role-switch;
+
+	port {
+		usb3_0_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* On-module Wi-Fi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+/* SMARC SDIO */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>,
+		    <&pinctrl_usdhc2_cd>,
+		    <&pinctrl_usdhc2_wp>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>,
+		    <&pinctrl_usdhc2_cd_sleep>,
+		    <&pinctrl_usdhc2_wp>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+};
+
+/* On-module eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	/* On-module Bluetooth */
+	pinctrl_bt_uart: btuartgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x1c4>, /* WiFi_UART_TXD */
+			   <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x1c4>, /* WiFi_UART_RXD */
+			   <MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS	0x1c4>, /* WiFi_UART_RTS */
+			   <MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS	0x1c4>; /* WiFi_UART_CTS */
+	};
+
+	/* SMARC CAM_MCK */
+	pinctrl_csi_mclk: csimclkgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2	0x16>; /* SMARC S6 - CAM_MCK  */
+	};
+
+	/* SMARC SPI0 */
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x1c4>, /* SMARC P45 - SPI0_DIN */
+			   <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x4>,   /* SMARC P46 - SPI0_DO */
+			   <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x4>,   /* SMARC P44 - SPI0_CK */
+			   <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x1c4>, /* SMARC P43 - SPI0_CS0# */
+			   <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x1c4>; /* SMARC P31 - SPI0_CS1# */
+	};
+
+	/* SMARC SPI1 */
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x1c4>, /* SMARC P56 - SPI1_DIN */
+			   <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x4>,   /* SMARC P57 - SPI1_DO */
+			   <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x4>,   /* SMARC P58 - SPI1_CK */
+			   <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x1c4>, /* SMARC P54 - SPI1_CS0# */
+			   <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x1c4>; /* SMARC P55 - SPI1_CS1# */
+	};
+
+	/* ETH_0 RGMII (On-module PHY) */
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90>, /* ETH0_RGMII_RXD0 */
+			   <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90>, /* ETH0_RGMII_RXD1 */
+			   <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90>, /* ETH0_RGMII_RXD2 */
+			   <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90>, /* ETH0_RGMII_RXD3 */
+			   <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90>, /* ETH0_RGMII_RXC */
+			   <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90>, /* ETH0_RGMII_RX_CTL */
+			   <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16>, /* ETH0_RGMII_TXD0 */
+			   <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16>, /* ETH0_RGMII_TXD1 */
+			   <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16>, /* ETH0_RGMII_TXD2 */
+			   <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16>, /* ETH0_RGMII_TXD3 */
+			   <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16>, /* ETH0_RGMII_TX_CTL */
+			   <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16>; /* ETH0_RGMII_TXC */
+	};
+
+	/* SMARC GBE0_SDP */
+	pinctrl_eqos_1588_event: eqos1588eventgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT	0x4>; /* SMARC P6 - GBE0_SDP */
+	};
+
+	/* ETH_0_MDIO and ETH_0_INT# shared between ETH_PHY0 and ETH_PHY1 */
+	pinctrl_eth_mdio: ethmdiogrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2>,  /* ETH_0_MDC */
+			   <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO	0x2>,  /* ETH_0_MDIO */
+			   <MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x80>; /* ETH_0_INT# */
+	};
+
+	/* ETH_1 RGMII (On-module PHY) */
+	pinctrl_fec: fecgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90>, /* ETH1_RGMII_RXD0 */
+			   <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90>, /* ETH1_RGMII_RXD1 */
+			   <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90>, /* ETH1_RGMII_RXD2 */
+			   <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90>, /* ETH1_RGMII_RXD3 */
+			   <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90>, /* ETH1_RGMII_RXC */
+			   <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90>, /* ETH1_RGMII_RX_CTL */
+			   <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x16>, /* ETH1_RGMII_TXD0 */
+			   <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x16>, /* ETH1_RGMII_TXD1 */
+			   <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x16>, /* ETH1_RGMII_TXD2 */
+			   <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x16>, /* ETH1_RGMII_TXD3 */
+			   <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16>, /* ETH1_RGMII_TX_CTL */
+			   <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x16>; /* ETH1_RGMII_TXC */
+	};
+
+	/* SMARC GBE1_SDP */
+	pinctrl_fec_1588_event: fec1588eventgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT	0x4>; /* SMARC P5 - GBE1_SDP */
+	};
+
+	/* SMARC CAN1 */
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_TXC__CAN1_RX	0x154>, /* SMARC P146 - CAN1_RX */
+			   <MX8MP_IOMUXC_SAI2_RXC__CAN1_TX	0x154>; /* SMARC P145 - CAN1_TX */
+	};
+
+	/* SMARC CAN0 */
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX	0x154>, /* SMARC P144 - CAN0_RX */
+			   <MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX	0x154>; /* SMARC P143 - CAN0_TX */
+	};
+
+	/* SMARC GPIO4 */
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x144>; /* SMARC P112 - GPIO4 */
+	};
+
+	/* SMARC GPIO5 */
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x144>; /* SMARC P113 - GPIO5 */
+	};
+
+	/* SMARC GPIO5 as PWM */
+	pinctrl_gpio5_pwm: gpio5pwmgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT	0x12>; /* SMARC P113 - PWM_OUT */
+	};
+
+	/* SMARC GPIO6 */
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x144>; /* SMARC P114 - GPIO6 */
+	};
+
+	/* SMARC GPIO7 */
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00	0x144>; /* SMARC P115 - GPIO7 */
+	};
+
+	/* SMARC GPIO8 */
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x144>; /* SMARC P116 - GPIO8 */
+	};
+
+	/* SMARC GPIO9 */
+	pinctrl_gpio9: gpio9grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x144>; /* SMARC P117 - GPIO9 */
+	};
+
+	/* SMARC GPIO10 */
+	pinctrl_gpio10: gpio10grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06	0x144>; /* SMARC P118 - GPIO10 */
+	};
+
+	/* SMARC GPIO11 */
+	pinctrl_gpio11: gpio11grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x144>; /* SMARC P119 - GPIO11 */
+	};
+
+	/* SMARC GPIO12 */
+	pinctrl_gpio12: gpio12grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08	0x144>; /* SMARC S142 - GPIO12 */
+	};
+
+	/* SMARC GPIO13 */
+	pinctrl_gpio13: gpio13grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x144>; /* SMARC S123 - GPIO13 */
+	};
+
+	/* SMARC HDMI */
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c6>, /* SMARC P105 - HDMI_CTRL_CK */
+			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c6>, /* SMARC P106 - HDMI_CTRL_DAT */
+			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x180>;      /* SMARC P104 - HDMI_HPD */
+	};
+
+	/* On-module I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL	0x400001c6>, /* CTRL_I2C_SCL */
+			   <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA	0x400001c6>; /* CTRL_I2C_SDA */
+	};
+
+	/* On-module I2C as GPIOs */
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c6>, /* CTRL_I2C_SCL */
+			   <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c6>; /* CTRL_I2C_SDA */
+	};
+
+	/* SMARC I2C_LCD */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL	0x400001c6>, /* SMARC S139 - I2C_LCD_CK */
+			   <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA	0x400001c6>; /* SMARC S140 - I2C_LCD_DAT */
+	};
+
+	/* SMARC I2C_LCD as GPIOs */
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c6>, /* SMARC S139 - I2C_LCD_CK */
+			   <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c6>; /* SMARC S140 - I2C_LCD_DAT */
+	};
+
+	/* SMARC I2C_CAM0 */
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL	0x400001c6>, /* SMARC S5 - I2C_CAM0_CK */
+			   <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA	0x400001c6>; /* SMARC S7 - I2C_CAM0_DAT */
+	};
+
+	/* SMARC I2C_CAM0 as GPIOs */
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c6>, /* SMARC S5 - I2C_CAM0_CK */
+			   <MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c6>; /* SMARC S7 - I2C_CAM0_DAT */
+	};
+
+	/* SMARC I2C_GP */
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL	0x400001c6>, /* SMARC S48 - I2C_GP_CK */
+			   <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA	0x400001c6>; /* SMARC S49 - I2C_GP_DAT */
+	};
+
+	/* SMARC I2C_GP as GPIOs */
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x400001c6>, /* SMARC S48 - I2C_GP_CK */
+			   <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x400001c6>; /* SMARC S49 - I2C_GP_DAT */
+	};
+
+	/* SMARC I2C_CAM1 */
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA	0x400001c6>, /* SMARC S2 - I2C_CAM1_DAT  */
+			   <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL	0x400001c6>; /* SMARC S1 - I2C_CAM1_CK  */
+	};
+
+	/* SMARC I2C_CAM1 as GPIOs */
+	pinctrl_i2c5_gpio: i2c5gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04	0x400001c6>, /* SMARC S2 - I2C_CAM1_DAT  */
+			   <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03	0x400001c6>; /* SMARC S1 - I2C_CAM1_CK  */
+	};
+
+	/* SMARC I2C_PM */
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL	0x400001c6>, /* SMARC P121 - I2C_PM_CK */
+			   <MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA	0x400001c6>; /* SMARC P122 - I2C_PM_DAT */
+	};
+
+	/* SMARC I2C_PM as GPIOs */
+	pinctrl_i2c6_gpio: i2c6gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28	0x400001c6>, /* SMARC P121 - I2C_PM_CK */
+			   <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x400001c6>; /* SMARC P122 - I2C_PM_DAT */
+	};
+
+	pinctrl_lvds_dsi_sel: lvdsdsiselgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x104>; /* LVDS_DSI_SEL */
+	};
+
+	pinctrl_mcu_int: mcuintgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x1C0>; /* MCU_INT# */
+	};
+
+	/* SMARC LCD1_BKLT_PWM */
+	pinctrl_lcd1_bklt_pwm1: pwm1grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT	0x12>; /* SMARC S122 - LCD1_BKLT_PWM */
+	};
+
+	/* SMARC LCD0_BKLT_PWM */
+	pinctrl_lcd0_bklt_pwm2: pwm2grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x12>; /* SMARC S141 - LCD0_BKLT_PWM */
+	};
+
+	/* PCAL6408 Interrupt */
+	pinctrl_pcal6408: pcal6408intgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x1c4>; /* GPIO_EX_INT# */
+	};
+
+	/* SMARC PCIE_A */
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x1c0>, /* SMARC S146 - PCIE_WAKE# */
+			   <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x04>;  /* SMARC P75 - PCIE_A_RST# */
+	};
+
+	/* PMIC Interrupt */
+	pinctrl_pmic: pmicintgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c4>; /* PMIC_INT# */
+	};
+
+	/* SMARC I2S0 */
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK	0x94>, /* SMARC S42 - I2S0_CK */
+			   <MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC	0x94>, /* SMARC S39 - I2S0_LRCLK */
+			   <MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0x94>, /* SMARC S41 - I2S0_SDIN */
+			   <MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0x94>; /* SMARC S40 - I2S0_SDOUT */
+	};
+
+	/* SMARC AUDIO_MCK */
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK	0x96>; /* SMARC S38 - AUDIO_MCK */
+	};
+
+	/* SMARC I2S2 */
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0x94>, /* SMARC S52 - I2S2_SDIN */
+			   <MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0x94>, /* SMARC S53 - I2S2_CK */
+			   <MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0x94>, /* SMARC S51 - I2S2_SDOUT */
+			   <MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0x94>; /* SMARC S50 - I2S2_LRCLK */
+	};
+
+	/* SMARC SLEEP# */
+	pinctrl_sleep: sleepgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x1C0>; /* SMARC S149 - SLEEP# */
+	};
+
+	/* SMARC SMB_ALERT# */
+	pinctrl_smb_alert: smbalertgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x1C0>; /* SMARC P1 - SMB_ALERT# */
+	};
+
+	/* TPM_CS# */
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x82>; /* TPM_CS# */
+	};
+
+	/* WIFI_BT_WKUP_HOST/TPM_INT# */
+	pinctrl_tpm_irq_wifi_bt_wkup: tpmirq-wifibtwkupgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04	0x16>; /* WIFI_BT_WKUP_HOST/TPM_INT# */
+	};
+
+	/* SMARC SER0 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS	0x1c4>, /* SMARC P132 - SER2_CTS */
+			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS	0x1c4>, /* SMARC P131 - SER2_RTS */
+			   <MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x1c4>, /* SMARC P130 - SER2_RX */
+			   <MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x1c4>; /* SMARC P139 - SER2_TX */
+	};
+
+	/* SMARC SER2 */
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS	0x1c4>, /* SMARC P139 - SER2_CTS */
+			   <MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS	0x1c4>, /* SMARC P138 - SER2_RTS */
+			   <MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x1c4>, /* SMARC P137 - SER2_RX */
+			   <MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x1c4>; /* SMARC P136 - SER2_TX */
+	};
+
+	/* SMARC SER3 */
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x1c4>, /* SMARC P141 - SER3_RX */
+			   <MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x1c4>; /* SMARC P140 - SER3_TX */
+	};
+
+	/* SMARC SER1 */
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x1c4>, /* SMARC P135 - SER1_RX */
+			   <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x1c4>; /* SMARC P134 - SER1_TX */
+	};
+
+	/* SMARC USB0_OTG_ID */
+	pinctrl_usb0_id: usb0idgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x1c4>; /* SMARC P64 - USB0_OTG_ID */
+	};
+
+	/* SMARC USB0_EN_OC# */
+	pinctrl_usb0_en_oc: usb0enocgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x04>; /* SMARC P62 - USB0_EN_OC# */
+	};
+
+	/* On module USB Hub VBUS, or SMARC USB2_EN_OC# depending on assembling */
+	pinctrl_usb1_en_oc: usb1enocgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x04>; /* SMARC P71 - USB2_EN_OC# */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196>, /* WiFi_SDIO_CLK */
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6>, /* WiFi_SDIO_CMD */
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6>, /* WiFi_SDIO_DATA0 */
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6>, /* WiFi_SDIO_DATA1 */
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6>, /* WiFi_SDIO_DATA2 */
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6>; /* WiFi_SDIO_DATA3 */
+	};
+
+	/* SMARC SDIO */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO 100MHz */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO 200MHz */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6>, /* SMARC P40 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6>, /* SMARC P41 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6>; /* SMARC P42 - SDIO_D3 */
+	};
+
+	/* SMARC SDIO_CD# */
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4>; /* SMARC P35 - SDIO_CD# */
+	};
+
+	/* SMARC SDIO_CD# */
+	pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x0>; /* SMARC P35 - SDIO_CD# */
+	};
+
+	/* SMARC SDIO_PWR_EN */
+	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x1c4>; /* SMARC P37 - SDIO_PWR_EN */
+	};
+
+	/* SMARC SDIO Sleep - Avoid backfeeding with removed card power */
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x100>, /* SMARC P36 - SDIO_CK */
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x100>, /* SMARC P34 - SDIO_CMD */
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x100>, /* SMARC P39 - SDIO_DO */
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x100>, /* SMARC P39 - SDIO_D1 */
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x100>, /* SMARC P39 - SDIO_D2 */
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x100>; /* SMARC P39 - SDIO_D3 */
+	};
+
+	pinctrl_usdhc2_vsel: usdhc2vselgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04	0x4>; /* PMIC_USDHC_VSELECT */
+	};
+
+	/* SMARC SDIO_WP */
+	pinctrl_usdhc2_wp: usdhc2wpgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_WP__GPIO2_IO20	0x144>; /* SMARC P33 - SDIO_WP */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0>; /* eMMC_CMD */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>; /* eMMC_CMD */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196>, /* eMMC_STROBE */
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2>, /* eMMC_DATA5 */
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2>, /* eMMC_DATA6 */
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d2>, /* eMMC_DATA7 */
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2>, /* eMMC_DATA0 */
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2>, /* eMMC_DATA1 */
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2>, /* eMMC_DATA2 */
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2>, /* eMMC_DATA3 */
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2>, /* eMMC_DATA4 */
+			   <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196>, /* eMMC_CLK */
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6>; /* eMMC_CMD */
+	};
+
+	/* SoC Watchdog */
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x4>; /* CTRL_SOC_WDOG */
+	};
+
+	/* On-module Wi-Fi power enable */
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x104>; /* CTRL_EN_WIFI */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
new file mode 100644
index 000000000000..e5a2b3780215
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	/*
+	 * The three camera regulators are controlled by a single GPIO. Declare
+	 * a single regulator for the three supplies.
+	 */
+	reg_cam: regulator-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		/* pad muxing already done in gpio2grp */
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vcc_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	cam24m: clock-cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VANA-supply = <&reg_cam>;
+		VDIG-supply = <&reg_cam>;
+		VDDL-supply = <&reg_cam>;
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			sony_imx219: endpoint {
+				remote-endpoint = <&imx8mp_mipi_csi_in>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&isi_0 {
+	status = "disabled";
+
+	ports {
+		port@0 {
+			/delete-node/ endpoint;
+		};
+	};
+};
+
+&isp_0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			isp0_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+				remote-endpoint = <&mipi_csi_0_out>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			imx8mp_mipi_csi_in: endpoint {
+				remote-endpoint = <&sony_imx219>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0_out {
+	remote-endpoint = <&isp0_in>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
index d7fd9d36f824..f7346b3d35fe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
@@ -467,6 +467,10 @@
 	status = "okay";
 };
 
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
 &sai5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai5>;
@@ -876,8 +880,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
@@ -886,8 +889,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
@@ -896,8 +898,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso
index ea44d605342b..ea44d605342b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index ae64731266f3..59642a8a2c44 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -234,9 +234,17 @@
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "tq-tlv320aic32x";
+		model = "tqm-tlv320aic32";
+		audio-asrc = <&easrc>;
 		audio-cpu = <&sai3>;
 		audio-codec = <&tlv320aic3x04>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
 	};
 
 	thermal-zones {
@@ -603,6 +611,10 @@
 	status = "okay";
 };
 
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -982,8 +994,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
@@ -992,8 +1003,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
@@ -1002,8 +1012,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index 336785a9fba8..9716f24f7c6e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2021-2022 TQ-Systems GmbH
- * Author: Alexander Stein <alexander.stein@tq-group.com>
+ * Copyright 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
  */
 
 #include "imx8mp.dtsi"
@@ -15,22 +16,18 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
-	/* identical to buck4_reg, but should never change */
-	reg_vcc3v3: regulator-vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	/* e-MMC IO, needed for HS modes */
-	reg_vcc1v8: regulator-vcc1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8";
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vqmmc>;
+		regulator-name = "V_SD2";
 		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		vin-supply = <&ldo5_reg>;
+		status = "disabled";
 	};
 };
 
@@ -38,6 +35,10 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&easrc {
+	status = "okay";
+};
+
 &flexspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexspi0>;
@@ -49,6 +50,7 @@
 		spi-max-frequency = <80000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5_reg>;
 
 		partitions {
 			compatible = "fixed-partitions";
@@ -176,17 +178,21 @@
 		read-only;
 		reg = <0x53>;
 		pagesize = <16>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 
 	m24c64: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 };
 
+&usdhc2 {
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -196,8 +202,8 @@
 	non-removable;
 	no-sd;
 	no-sdio;
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc1v8>;
+	vmmc-supply = <&buck4_reg>;
+	vqmmc-supply = <&buck5_reg>;
 	status = "okay";
 };
 
@@ -236,6 +242,10 @@
 		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x10>;
 	};
 
+	pinctrl_reg_usdhc2_vqmmc: regusdhc2vqmmcgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04		0xc0>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
 			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso
new file mode 100644
index 000000000000..e3965caca6be
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	model = "GOcontroll Moduline Display with BOE av101hdt-a10 display";
+
+	panel {
+		compatible = "boe,av101hdt-a10";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_panel>;
+		pinctrl-names = "default";
+		power-supply = <&reg_3v3_per>;
+		reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_lvds_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+
+	reg_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		power-supply = <&reg_6v4>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-c-vbus";
+	};
+};
+
+&iomuxc {
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09
+				MX8MP_DSE_X1
+		>;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+	/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+	assigned-clock-rates = <0>, <1054620000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_lvds_in>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "host";
+		pd-disable;
+		vbus-supply = <&reg_vbus>;
+
+		port {
+			high_speed_ep: endpoint {
+				remote-endpoint = <&usb1_hs_ep>;
+			};
+		};
+	};
+
+	port {
+		usb1_hs_ep: endpoint {
+			remote-endpoint = <&high_speed_ep>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
new file mode 100644
index 000000000000..3eb665ce9d5d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	model = "GOcontroll Moduline Display with BOE av123z7m-n17 display";
+
+	panel {
+		compatible = "boe,av123z7m-n17";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_panel>;
+		pinctrl-names = "default";
+		power-supply = <&reg_3v3_per>;
+		reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+
+				panel_in0: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+
+				panel_in1: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* sn65dsi85 */
+	bridge@2d {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2d>;
+		enable-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_lvds_bridge>;
+		pinctrl-names = "default";
+		vcc-supply = <&reg_1v8_per>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dsi_lvds_bridge_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lvds0_out: endpoint {
+					remote-endpoint = <&panel_in1>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				lvds1_out: endpoint {
+					remote-endpoint = <&panel_in0>;
+				};
+			};
+		};
+	};
+
+	/* max25014 @ 0x6f */
+};
+
+&iomuxc {
+	pinctrl_lvds_bridge: lvdsbridgegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09
+				MX8MP_DSE_X1
+		>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	/*
+	 * burst has to be at least 2x dsi clock that the sn65dsi85 expects
+	 * display pixelclock * bpp / lanes / 2 = dsi clock
+	 * 88.000.000 * 24 / 4 / 2 = 264.000.000
+	 * range gets rounded up to 265.000.000 - 270.000.000
+	 * 267.500.000 * 2 = 535.000.000
+	 */
+	samsung,burst-clock-frequency = <535000000>;
+	samsung,esc-clock-frequency = <12000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			mipi_dsi_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = < &dsi_lvds_bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
new file mode 100644
index 000000000000..88ad422c2760
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
@@ -0,0 +1,525 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-tx8p-ml81.dtsi"
+
+/ {
+	compatible = "gocontroll,moduline-display", "fsl,imx8mp";
+	chassis-type = "embedded";
+	hardware = "Moduline Display V1.06";
+	model = "GOcontroll Moduline Display baseboard";
+
+	aliases {
+		can0 = &flexcan1;
+		can1 = &flexcan2;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		rtc0 = &rtc_pcf; /* i2c rtc is the main rtc */
+		rtc1 = &snvs_rtc;
+		spi0 = &ecspi2; /* spidev number compatibility */
+		spi1 = &ecspi1; /* spidev number compatibility */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	external-sensor-supply {
+		compatible = "regulator-output";
+		vout-supply = <&reg_5v0_sensor>;
+	};
+
+	flexcan1_phy: can-phy0 {
+		compatible = "ti,tcan1051", "ti,tcan1042";
+		#phy-cells = <0>;
+		pinctrl-0 = <&pinctrl_flexcan1_stby>;
+		pinctrl-names = "default";
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	flexcan2_phy: can-phy1 {
+		compatible = "ti,tcan1051", "ti,tcan1042";
+		#phy-cells = <0>;
+		pinctrl-0 = <&pinctrl_flexcan2_stby>;
+		pinctrl-names = "default";
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1v8_per: regulator-1v8-per {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_reg_1v8>;
+		pinctrl-names = "default";
+		power-supply = <&reg_3v3_per>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "1v8-per";
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_3v3_per: regulator-3v3-per {
+		compatible = "regulator-fixed";
+		power-supply = <&reg_6v4>;
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3-per";
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		power-supply = <&reg_6v4>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "5v0";
+	};
+
+	reg_5v0_sensor: regulator-5v0-sensor {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_reg_5v0_sensor>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "5v0-supply-external-sensor";
+		gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_6v4: regulator-6v4 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <6400000>;
+		regulator-min-microvolt = <6400000>;
+		regulator-name = "6v4";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,name = "tas2505-audio";
+		simple-audio-card,routing = "Speaker", "DAC";
+		simple-audio-card,widgets = "Speaker", "Speaker External";
+
+		simple-audio-card,codec {
+			sound-dai = <&tas2505>;
+		};
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+		};
+	};
+
+	wifi_powerseq: wifi-powerseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&pinctrl_wl_reg>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <500000>;
+		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>,
+		   <&gpio1 11 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	connector@0 {
+		compatible = "gocontroll,moduline-module-slot";
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		i2c-bus = <&i2c2>;
+		reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		slot-number = <1>;
+		spi-max-frequency = <54000000>;
+		sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		vddhpp-supply = <&reg_6v4>;
+		vddp-supply = <&reg_5v0>;
+		vdd-supply = <&reg_3v3_per>;
+	};
+
+	connector@1 {
+		compatible = "gocontroll,moduline-module-slot";
+		reg = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		i2c-bus = <&i2c2>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		slot-number = <2>;
+		spi-max-frequency = <54000000>;
+		sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		vddhpp-supply = <&reg_6v4>;
+		vddp-supply = <&reg_5v0>;
+		vdd-supply = <&reg_3v3_per>;
+	};
+
+	adc@2 {
+		compatible = "microchip,mcp3004";
+		reg = <2>;
+		spi-max-frequency = <2300000>;
+		vref-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&flexcan1 {
+	phys = <&flexcan1_phy>;
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan2 {
+	phys = <&flexcan2_phy>;
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tas2505: audio-codec@18 {
+		compatible = "ti,tas2505";
+		reg = <0x18>;
+		clocks = <&clk IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		aic32x4-gpio-func = <0xff 0xff 0xff 0xff 0xff>;
+		av-supply = <&reg_1v8_per>;
+		dv-supply = <&reg_1v8_per>;
+		iov-supply = <&reg_vdd_3v3>;
+		pinctrl-0 = <&pinctrl_tas_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	};
+
+	rtc_pcf: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+
+		clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI
+				MX8MP_DSE_X4
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO
+				(MX8MP_DSE_X4 | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK
+				MX8MP_DSE_X4
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11
+				MX8MP_DSE_X1
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			 MX8MP_IOMUXC_SPDIF_RX__CAN1_RX
+				 (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			 MX8MP_IOMUXC_SPDIF_TX__CAN1_TX
+				 (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_flexcan1_stby: flexcan1stbygrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_UART3_RXD__CAN2_TX
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_flexcan2_stby: flexcan2stbygrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_usdhc2: pinctrlusdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+		>;
+	};
+
+	pinctrl_reg_1v8: reg-1v8-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_reg_5v0_sensor: reg-5v0-sensorgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+			MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+		>;
+	};
+
+	pinctrl_tas_reset: tasresetgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24
+				MX8MP_DSE_X1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B
+				(MX8MP_DSE_X6 | MX8MP_HYS_SCHMITT)
+		>;
+	};
+
+	pinctrl_wl_int: wlintgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13
+				(MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_wl_reg: wlreggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19
+				MX8MP_DSE_X1
+		>;
+	};
+};
+
+&sai6 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	pinctrl-0 = <&pinctrl_sai6>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt";
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wakeup";
+		device-wakeup-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		max-speed = <921600>;
+		pinctrl-0 = <&pinctrl_bt>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_3v3_per>;
+		vddio-supply = <&reg_3v3_per>;
+	};
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <50000000>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&wifi_powerseq>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	sd-uhs-sdr25;
+	vmmc-supply = <&reg_3v3_per>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+		pinctrl-0 = <&pinctrl_wl_int>;
+		pinctrl-names = "default";
+		brcm,board-type = "GOcontroll,moduline";
+	};
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi
new file mode 100644
index 000000000000..fe8ba16eb40e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 Lothar Waßmann <LW@KARO-electronics.de>
+ * 2025 Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	/* PHY regulator */
+	regulator-3v3-etn {
+		compatible = "regulator-fixed";
+		gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&pinctrl_reg_3v3_etn>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3-etn";
+		vin-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&eqos {
+	assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+			  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+			  <&clk IMX8MP_CLK_ENET_QOS>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <266000000>, <100000000>, <50000000>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pinctrl_ethphy_rst_b>;
+		pinctrl-names = "default";
+		reset-delay-us = <25000>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk IMX8MP_CLK_ENET_QOS>;
+			pinctrl-0 = <&pinctrl_ethphy_int_b>;
+			pinctrl-names = "default";
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_152",
+			  "SODIMM_42",
+			  "PMIC_WDOG_B SODIMM_153",
+			  "PMIC_IRQ_B",
+			  "SODIMM_154",
+			  "SODIMM_155",
+			  "SODIMM_156",
+			  "SODIMM_157",
+			  "SODIMM_158",
+			  "SODIMM_159",
+			  "SODIMM_161",
+			  "SODIMM_162",
+			  "SODIMM_34",
+			  "SODIMM_36",
+			  "SODIMM_27",
+			  "SODIMM_28",
+			  "ENET_MDC",
+			  "ENET_MDIO",
+			  "",
+			  "ENET_XTAL1/CLKIN",
+			  "ENET_TXD1",
+			  "ENET_TXD0",
+			  "ENET_TXEN",
+			  "ENET_POWER",
+			  "ENET_COL/CRS_DV",
+			  "ENET_RXER",
+			  "ENET_RXD0",
+			  "ENET_RXD1",
+			  "",
+			  "",
+			  "",
+			  "";
+};
+
+&gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_51",
+			  "SODIMM_57",
+			  "SODIMM_56",
+			  "SODIMM_52",
+			  "SODIMM_53",
+			  "SODIMM_54",
+			  "SODIMM_55",
+			  "SODIMM_15",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "";
+};
+
+&gpio3 {
+	gpio-line-names = "",
+			  "",
+			  "EMMC_DS",
+			  "EMMC_DAT5",
+			  "EMMC_DAT6",
+			  "EMMC_DAT7",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EMMC_DAT0",
+			  "EMMC_DAT1",
+			  "EMMC_DAT2",
+			  "EMMC_DAT3",
+			  "",
+			  "EMMC_DAT4",
+			  "",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "SODIMM_75",
+			  "SODIMM_145",
+			  "SODIMM_163",
+			  "SODIMM_164",
+			  "SODIMM_165",
+			  "SODIMM_143",
+			  "SODIMM_144",
+			  "SODIMM_72",
+			  "SODIMM_73",
+			  "SODIMM_74",
+			  "SODIMM_93",
+			  "",
+			  "";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_98",
+			  "SODIMM_99",
+			  "SODIMM_100",
+			  "SODIMM_101",
+			  "SODIMM_45",
+			  "SODIMM_43",
+			  "SODIMM_105",
+			  "SODIMM_106",
+			  "SODIMM_107",
+			  "SODIMM_108",
+			  "SODIMM_104",
+			  "SODIMM_103",
+			  "SODIMM_115",
+			  "SODIMM_114",
+			  "SODIMM_113",
+			  "SODIMM_112",
+			  "SODIMM_109",
+			  "SODIMM_110",
+			  "SODIMM_95",
+			  "SODIMM_96",
+			  "SODIMM_97",
+			  "ENET_nINT",
+			  "ENET_nRST",
+			  "SODIMM_84",
+			  "SODIMM_87",
+			  "SODIMM_86",
+			  "SODIMM_85",
+			  "SODIMM_83",
+			  "",
+			  "SODIMM_66",
+			  "SODIMM_65",
+			  "";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_81",
+			  "SODIMM_146",
+			  "SODIMM_48",
+			  "SODIMM_46",
+			  "SODIMM_47",
+			  "SODIMM_44",
+			  "SODIMM_49",
+			  "",
+			  "SODIMM_70",
+			  "SODIMM_69",
+			  "PMIC_SCL",
+			  "PMIC_SDA",
+			  "SODIMM_41",
+			  "SODIMM_40",
+			  "SODIMM_148",
+			  "SODIMM_149",
+			  "SODIMM_150",
+			  "SODIMM_151",
+			  "SODIMM_60",
+			  "SODIMM_59",
+			  "SODIMM_64",
+			  "SODIMM_63",
+			  "SODIMM_62",
+			  "SODIMM_61",
+			  "SODIMM_68",
+			  "SODIMM_67",
+			  "",
+			  "";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "vdd-soc";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "vdd-core";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "3v3";
+			};
+
+			reg_nvcc_nand: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "nvcc-nand";
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "nvcc-dram";
+			};
+
+			reg_snvs_1v8: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "snvs-1v8";
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-always-on;
+				regulator-max-microvolt = <1150000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "LDO2";
+			};
+
+			reg_vdda_1v8: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vdda-1v8";
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "LDO4";
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK
+				(MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_SION)
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC
+				(MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO
+				(MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0
+				(MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1
+				(MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER
+				(MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+		>;
+	};
+
+	pinctrl_eqos_sleep: eqos-sleep-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22
+				(MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_ethphy_int_b: ethphy-int-bgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21
+				(MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+		>;
+	};
+
+	pinctrl_ethphy_rst_b: ethphy-rst-bgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14
+				MX8MP_I2C_DEFAULT
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15
+				MX8MP_I2C_DEFAULT
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03
+				(MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_reg_3v3_etn: reg-3v3-etngrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23
+				(MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+				(MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+				MX8MP_USDHC_DATA_DEFAULT
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+				(MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+				(MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+				(MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+				(MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+		>;
+	};
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_vdd_3v3>;
+	voltage-ranges = <3300 3300>;
+	vqmmc-supply = <&reg_nvcc_nand>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
new file mode 100644
index 000000000000..9ecec1a41878
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Ultratronik
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "NXP i.MX8MPlus Ultratronik MMI_A53 board";
+	compatible = "ultratronik,imx8mp-ultra-mach-sbc", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		rtc0 = &hwrtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-sbu-mux {
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sbu_mux>;
+		select-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* Wakeup */
+			label = "Wakeup";
+			linux,code = <KEY_WAKEUP>;
+			pinctrl-0 = <&pinctrl_gpio_key_wakeup>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "red";
+			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green";
+			gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "yellow";
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_usba_vbus: regulator-usba-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1>;
+		regulator-name = "usb-A-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slb9670: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_slb9670>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		<&gpio1 8 GPIO_ACTIVE_LOW>,
+		<&gpio1 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	nfc-transceiver@1 {
+		compatible = "st,st95hf";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nfc>;
+		spi-max-frequency = <100000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		enable-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x2>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"#TPM_IRQ", "GPIO1", "", "#PMIC_INT",
+		"SD2_VSEL", "#TOUCH_IRQ", "#NFC_INT_I", "#NFC_INT",
+		"#SPI2_CS2", "#SPI2_CS3", "#RTS4", "",
+		"USB_PWR", "GPIO2", "GPIO3", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "#SD2_CD", "", "", "",
+		"", "", "", "", "#USB-C_EN", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "DISP_POW", "GPIO4",
+		"#", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"BKL_POW", "#ETH1_INT", "#TPM_RES", "#PCAP_RES",
+		"", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "#ETH0_INT", "#USB-C_ALERT",
+		"#USB-C_SEL", "", "", "",
+		"LED_RED", "LED_GREEN", "LED_YELLOW", "#WAKEUP",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "#SPI1_CS", "", "", "", "#SPI2_CS1", "", "",
+		"", "", "", "", "ENA_KAM", "ENA_LED", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8DVNLZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {	/* +3V3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* +1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* DRAM_1V1 */
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1P8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* ENET_2V5 */
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	crypto@35 {
+		compatible = "atmel,atecc508a";
+		reg = <0x35>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	hwrtc: rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+		epson,vdet-disable;
+		trickle-diode-disable;
+	};
+
+	tcpc@52 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5110>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 5000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c5 {	/* HDMI EDID bus */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* system console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	/* expansion port serial connection */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usba_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	snps,hsphy_interface = "utmi";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1_cs: ecspi1-cs-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40	/* #SPI1_CS */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2-cs-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40	/* #SPI2_CS */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x40	/* #SPI2_CS2 */
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x40	/* #SPI2_CS3 */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+		>;
+	};
+
+	pinctrl_eqos: eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x0
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x0
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x10	/* #ETH0_INT */
+		>;
+	};
+
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC               0x0
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO              0x0
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0         0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1         0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2         0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3         0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC          0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL      0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0         0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1         0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2         0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3         0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL      0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC         0x16
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01               0x10	/* #ETH1_INT */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_gpio_key_wakeup: gpio-key-wakeup-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x40	/* #WAKEUP */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpio-leds-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x40	/* LED_RED */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x40	/* LED_GREEN */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26		0x40	/* LED_YELLOW */
+		>;
+	};
+
+	pinctrl_hdmi: hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	pinctrl_hog: hog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x40	/* GPIO1 */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x40	/* GPIO2 */
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x40	/* GPIO3 */
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23	0x40	/* GPIO4 */
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x40	/* ENA_KAM */
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x40	/* ENA_LED */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x40	/* #PCAP_RES */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x40	/* #RTS4 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c0
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0xc0
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0xc0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c0
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0xc0
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0xc0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0xc2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0xc2
+		>;
+	};
+
+	pinctrl_i2c5: i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x400000c4
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x400000c4
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0xc4
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0xc4
+		>;
+	};
+
+	pinctrl_nfc: nfc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40	/* NFC_INT_I */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x40	/* NFC_INT */
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40	/* #PMIC_INT */
+		>;
+	};
+
+	pinctrl_ptn5110: ptn5110-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x1c4	/* #USB-C_ALERT */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x116	/* EXT_PWM */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: reg-usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_sbu_mux: sbu-mux-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x16	/* #USB-C_SEL */
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20			0x16	/* #USB-C_EN */
+		>;
+	};
+
+	pinctrl_slb9670: slb9670-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x40	/* #TPM_IRQ */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x40	/* #TPM_RES */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x40
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x40
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_usb1: usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x40	/* USB_PWR */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x40	/* #SD3_RESET */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x192
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d2
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d2
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d2
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x192
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6	/* #WDOG */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
index b2ac2583a592..29f080904482 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -35,7 +35,6 @@
 		      <0x1 0x00000000 0 0xc0000000>;
 	};
 
-
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 	        compatible = "regulator-fixed";
 	        regulator-name = "VSD_3V3";
@@ -46,6 +45,34 @@
 	        startup-delay-us = <100>;
 	        off-on-delay-us = <12000>;
 	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "VSD_VSEL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0x0 1800000 0x1>;
+		vin-supply = <&ldo5>;
+	};
+
+	reg_phy_supply: regulator-phy-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "phy-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_phy_vddio: regulator-phy-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
 };
 
 &A53_0 {
@@ -64,6 +91,53 @@
 	cpu-supply = <&buck2>;
 };
 
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <100000>;
+			vddio-supply = <&reg_phy_vddio>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+			};
+		};
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -205,6 +279,7 @@
         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
         cd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
         vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
         bus-width = <4>;
         status = "okay";
 };
@@ -229,6 +304,27 @@
 
 &iomuxc {
 
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20					0x10
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10				0x150
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL				0x400001c2
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
index 10713c34ff39..de852ebff571 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -101,6 +101,7 @@
 			reg = <0x0>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
@@ -395,13 +396,6 @@
 	status = "okay";
 };
 
-/* off-board header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
 /* console */
 &uart2 {
 	pinctrl-names = "default";
@@ -409,31 +403,14 @@
 	status = "okay";
 };
 
-/* off-board header */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-/* off-board */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
 /* eMMC */
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
@@ -462,7 +439,7 @@
 			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
 			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
 			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
-			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x0
 		>;
 	};
 
@@ -521,13 +498,6 @@
 		>;
 	};
 
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
-			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
-		>;
-	};
-
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
@@ -535,24 +505,6 @@
 		>;
 	};
 
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
-			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
-			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
-			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
-			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
-			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
-			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
-		>;
-	};
-
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
index 2f740d74707b..4bf818873fe3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -70,7 +70,7 @@
 	tpm@1 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
index 5ab3ffe9931d..76020ef89bf3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -110,7 +110,7 @@
 	tpm@1 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
@@ -365,17 +365,6 @@
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
-			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
-			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
-			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
-			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
-			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
-		>;
-	};
-
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index e2b5e7ac3e46..5eb114d2360a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -122,7 +122,7 @@
 	tpm@1 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 6daa2313f879..7662663ff5da 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -201,7 +201,7 @@
 	tpm@0 {
 		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x0>;
-		spi-max-frequency = <36000000>;
+		spi-max-frequency = <25000000>;
 	};
 };
 
@@ -228,6 +228,7 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0x0>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
@@ -301,7 +302,7 @@
 &gpio3 {
 	gpio-line-names =
 		"", "", "", "", "", "", "m2_rst", "",
-		"", "", "", "", "", "", "m2_gpio10", "",
+		"", "", "", "", "", "", "m2_wdis2#", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "";
 };
@@ -310,7 +311,7 @@
 	gpio-line-names =
 		"", "", "m2_off#", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
-		"", "", "m2_wdis#", "", "", "", "", "",
+		"", "", "m2_wdis1#", "", "", "", "", "",
 		"", "", "", "", "", "", "", "rs485_en";
 };
 
@@ -811,14 +812,14 @@
 			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09	0x40000040 /* DIO0 */
 			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x40000040 /* DIO1 */
 			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x40000040 /* M2SKT_OFF# */
-			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x40000150 /* M2SKT_WDIS# */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x40000150 /* M2SKT_WDIS1# */
 			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40000040 /* M2SKT_PIN20 */
 			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11	0x40000040 /* M2SKT_PIN22 */
 			MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13	0x40000150 /* PCIE1_WDIS# */
 			MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14	0x40000150 /* PCIE3_WDIS# */
 			MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18	0x40000150 /* PCIE2_WDIS# */
 			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x40000040 /* M2SKT_RST# */
-			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x40000040 /* M2SKT_GPIO10 */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x40000150 /* M2KST_WDIS2# */
 			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01	0x40000104 /* UART_TERM */
 			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31	0x40000104 /* UART_RS485 */
 			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00	0x40000104 /* UART_HALF */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index da8902c5f7e5..1493319aa748 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -28,10 +28,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index e3869efe4fd0..d43ba0087126 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -657,7 +657,7 @@
 	};
 
 	eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 	};
@@ -770,7 +770,7 @@
 
 	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
 	eeprom_display_adapter: eeprom@50 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x50>;
 		status = "disabled";
@@ -778,7 +778,7 @@
 
 	/* EEPROM on carrier board */
 	eeprom_carrier_board: eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x57>;
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index e0d3b8cba221..9b2b3a9bf9e8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -6,12 +6,14 @@
 #include <dt-bindings/clock/imx8mp-clock.h>
 #include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/reset/imx8mp-reset.h>
+#include <dt-bindings/reset/imx8mp-reset-audiomix.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interconnect/fsl,imx8mp.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
+#include "imx8mp-aipstz.h"
 #include "imx8mp-pinfunc.h"
 
 / {
@@ -65,7 +67,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -80,13 +81,18 @@
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
 			cpu-idle-states = <&cpu_pd_wait>;
+
+			cpu0_therm: thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <700>;
+			};
 		};
 
 		A53_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -99,13 +105,18 @@
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
 			cpu-idle-states = <&cpu_pd_wait>;
+
+			cpu1_therm: thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <700>;
+			};
 		};
 
 		A53_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -118,13 +129,18 @@
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
 			cpu-idle-states = <&cpu_pd_wait>;
+
+			cpu2_therm: thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <700>;
+			};
 		};
 
 		A53_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -137,6 +153,12 @@
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
 			cpu-idle-states = <&cpu_pd_wait>;
+
+			cpu3_therm: thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <700>;
+			};
 		};
 
 		A53_L2: l2-cache0 {
@@ -280,7 +302,7 @@
 		ranges;
 
 		dsp_reserved: dsp@92400000 {
-			reg = <0 0x92400000 0 0x2000000>;
+			reg = <0 0x92400000 0 0x1000000>;
 			no-map;
 			status = "disabled";
 		};
@@ -301,7 +323,7 @@
 		cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 0>;
+			thermal-sensors = <&tmu 1>;
 			trips {
 				cpu_alert0: trip0 {
 					temperature = <85000>;
@@ -323,7 +345,14 @@
 						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu0_therm 0 50>,
+						<&cpu1_therm 0 50>,
+						<&cpu2_therm 0 50>,
+						<&cpu3_therm 0 50>;
 				};
 			};
 		};
@@ -331,7 +360,7 @@
 		soc-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 1>;
+			thermal-sensors = <&tmu 0>;
 			trips {
 				soc_alert0: trip0 {
 					temperature = <85000>;
@@ -353,7 +382,14 @@
 						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu0_therm 0 50>,
+						<&cpu1_therm 0 50>,
+						<&cpu2_therm 0 50>,
+						<&cpu3_therm 0 50>;
 				};
 			};
 		};
@@ -816,12 +852,12 @@
 						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
 								  <&clk IMX8MP_CLK_ML_AXI>,
 								  <&clk IMX8MP_CLK_ML_AHB>;
-						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
 									 <&clk IMX8MP_SYS_PLL1_800M>,
 									 <&clk IMX8MP_SYS_PLL1_800M>;
-						assigned-clock-rates = <800000000>,
+						assigned-clock-rates = <1000000000>,
 								       <800000000>,
-								       <300000000>;
+								       <400000000>;
 					};
 
 					pgc_audio: power-domain@5 {
@@ -834,7 +870,7 @@
 						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
 									 <&clk IMX8MP_SYS_PLL1_800M>;
 						assigned-clock-rates = <400000000>,
-								       <600000000>;
+								       <800000000>;
 					};
 
 					pgc_gpu2d: power-domain@6 {
@@ -879,24 +915,17 @@
 
 					pgc_vpu_g1: power-domain@11 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
 						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
-						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
 					};
 
 					pgc_vpu_g2: power-domain@12 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
 						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
-						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
-
 					};
 
 					pgc_vpu_vc8000e: power-domain@13 {
 						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
 						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
-						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
 					};
 
 					pgc_hdmimix: power-domain@14 {
@@ -1252,6 +1281,7 @@
 				reg = <0x30e60000 0x10000>;
 				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 				#mbox-cells = <2>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_MU2_ROOT>;
 				status = "disabled";
 			};
 
@@ -1399,12 +1429,14 @@
 			};
 		};
 
-		aips5: bus@30c00000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x30c00000 0x400000>;
+		aips5: bus@30df0000 {
+			compatible = "fsl,imx8mp-aipstz";
+			reg = <0x30df0000 0x10000>;
+			power-domains = <&pgc_audio>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			#access-controller-cells = <3>;
+			ranges = <0x30c00000 0x30c00000 0x400000>;
 
 			spba-bus@30c00000 {
 				compatible = "fsl,spba-bus", "simple-bus";
@@ -1619,10 +1651,11 @@
 					 <&clk IMX8MP_CLK_SAI3>,
 					 <&clk IMX8MP_CLK_SAI5>,
 					 <&clk IMX8MP_CLK_SAI6>,
-					 <&clk IMX8MP_CLK_SAI7>;
+					 <&clk IMX8MP_CLK_SAI7>,
+					 <&clk IMX8MP_CLK_AUDIO_AXI_ROOT>;
 				clock-names = "ahb",
 					      "sai1", "sai2", "sai3",
-					      "sai5", "sai6", "sai7";
+					      "sai5", "sai6", "sai7", "axi";
 				power-domains = <&pgc_audio>;
 				assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>,
 						  <&clk IMX8MP_AUDIO_PLL2>;
@@ -1644,6 +1677,12 @@
 					opp-hz = /bits/ 64 <200000000>;
 				};
 
+				/* Nominal drive mode maximum */
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+				};
+
+				/* Overdrive mode maximum */
 				opp-1000000000 {
 					opp-hz = /bits/ 64 <1000000000>;
 				};
@@ -1697,9 +1736,12 @@
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
-					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
-				clock-names = "isp", "aclk", "hclk";
-				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>;
+				clock-names = "isp", "aclk", "hclk", "pclk";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>,
+						<&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
+				power-domain-names = "isp", "csi2";
 				fsl,blk-ctrl = <&media_blk_ctrl 0>;
 				status = "disabled";
 
@@ -1719,9 +1761,12 @@
 				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
-					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
-				clock-names = "isp", "aclk", "hclk";
-				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>;
+				clock-names = "isp", "aclk", "hclk", "pclk";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>,
+						<&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
+				power-domain-names = "isp", "csi2";
 				fsl,blk-ctrl = <&media_blk_ctrl 1>;
 				status = "disabled";
 
@@ -1760,6 +1805,7 @@
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
 							 <&clk IMX8MP_CLK_24M>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
+				fsl,num-channels = <3>;
 				status = "disabled";
 
 				ports {
@@ -1795,6 +1841,7 @@
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
 							 <&clk IMX8MP_CLK_24M>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
+				fsl,num-channels = <3>;
 				status = "disabled";
 
 				ports {
@@ -2041,6 +2088,10 @@
 						     "pai", "pvi", "trng",
 						     "hdmi-tx", "hdmi-tx-phy",
 						     "hdcp", "hrv";
+				interconnects = <&noc IMX8MP_ICM_HRV &noc IMX8MP_ICN_HDMI>,
+						<&noc IMX8MP_ICM_LCDIF_HDMI &noc IMX8MP_ICN_HDMI>,
+						<&noc IMX8MP_ICM_HDCP &noc IMX8MP_ICN_HDMI>;
+				interconnect-names = "hrv", "lcdif-hdmi", "hdcp";
 				#power-domain-cells = <1>;
 			};
 
@@ -2059,7 +2110,7 @@
 
 			hdmi_pvi: display-bridge@32fc4000 {
 				compatible = "fsl,imx8mp-hdmi-pvi";
-				reg = <0x32fc4000 0x1000>;
+				reg = <0x32fc4000 0x800>;
 				interrupt-parent = <&irqsteer_hdmi>;
 				interrupts = <12>;
 				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
@@ -2085,6 +2136,23 @@
 				};
 			};
 
+			hdmi_pai: audio-bridge@32fc4800 {
+				compatible = "fsl,imx8mp-hdmi-pai";
+				reg = <0x32fc4800 0x800>;
+				interrupt-parent = <&irqsteer_hdmi>;
+				interrupts = <14>;
+				clocks = <&clk IMX8MP_CLK_HDMI_APB>;
+				clock-names = "apb";
+				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>;
+				status = "disabled";
+
+				port {
+					pai_to_hdmi_tx: endpoint {
+						remote-endpoint = <&hdmi_tx_from_pai>;
+					};
+				};
+			};
+
 			lcdif3: display-controller@32fc6000 {
 				compatible = "fsl,imx8mp-lcdif";
 				reg = <0x32fc6000 0x1000>;
@@ -2136,6 +2204,14 @@
 						reg = <1>;
 						/* Point endpoint to the HDMI connector */
 					};
+
+					port@2 {
+						reg = <2>;
+
+						hdmi_tx_from_pai: endpoint {
+							remote-endpoint = <&pai_to_hdmi_tx>;
+						};
+					};
 				};
 			};
 
@@ -2154,7 +2230,7 @@
 			};
 		};
 
-		pcie: pcie@33800000 {
+		pcie0: pcie: pcie@33800000 {
 			compatible = "fsl,imx8mp-pcie";
 			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
 			reg-names = "dbi", "config";
@@ -2192,7 +2268,7 @@
 			status = "disabled";
 		};
 
-		pcie_ep: pcie-ep@33800000 {
+		pcie0_ep: pcie_ep: pcie-ep@33800000 {
 			compatible = "fsl,imx8mp-pcie-ep";
 			reg = <0x33800000 0x100000>,
 			      <0x18000000 0x8000000>,
@@ -2230,11 +2306,12 @@
 				 <&clk IMX8MP_CLK_GPU_ROOT>,
 				 <&clk IMX8MP_CLK_GPU_AHB>;
 			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
 			assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>,
 					  <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
-			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
-						 <&clk IMX8MP_SYS_PLL1_800M>;
-			assigned-clock-rates = <800000000>, <800000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+						 <&clk IMX8MP_SYS_PLL2_1000M>;
+			assigned-clock-rates = <1000000000>, <1000000000>;
 			power-domains = <&pgc_gpu3d>;
 		};
 
@@ -2246,9 +2323,10 @@
 				 <&clk IMX8MP_CLK_GPU_ROOT>,
 				 <&clk IMX8MP_CLK_GPU_AHB>;
 			clock-names = "core", "bus", "reg";
+			#cooling-cells = <2>;
 			assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>;
-			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
-			assigned-clock-rates = <800000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+			assigned-clock-rates = <1000000000>;
 			power-domains = <&pgc_gpu2d>;
 		};
 
@@ -2258,8 +2336,8 @@
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
 			assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
-			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
-			assigned-clock-rates = <600000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+			assigned-clock-rates = <800000000>;
 			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>;
 		};
 
@@ -2268,9 +2346,9 @@
 			reg = <0x38310000 0x10000>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
-			assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
-			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
-			assigned-clock-rates = <500000000>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>, <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <700000000>, <700000000>;
 			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>;
 		};
 
@@ -2285,9 +2363,9 @@
 				 <&clk IMX8MP_CLK_VPU_G2_ROOT>,
 				 <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
 			clock-names = "g1", "g2", "vc8000e";
-			assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>;
-			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
-			assigned-clock-rates = <600000000>, <600000000>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+			assigned-clock-rates = <800000000>;
 			interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
 					<&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
 					<&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
@@ -2303,6 +2381,7 @@
 				 <&clk IMX8MP_CLK_ML_AXI>,
 				 <&clk IMX8MP_CLK_ML_AHB>;
 			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
 			power-domains = <&pgc_mlmix>;
 		};
 
@@ -2310,6 +2389,7 @@
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
 			      <0x38880000 0xc0000>;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -2414,13 +2494,24 @@
 		};
 
 		dsp: dsp@3b6e8000 {
-			compatible = "fsl,imx8mp-dsp";
+			compatible = "fsl,imx8mp-hifi4";
 			reg = <0x3b6e8000 0x88000>;
-			mbox-names = "txdb0", "txdb1",
-				"rxdb0", "rxdb1";
-			mboxes = <&mu2 2 0>, <&mu2 2 1>,
-				<&mu2 3 0>, <&mu2 3 1>;
-			memory-region = <&dsp_reserved>;
+			clocks = <&audio_blk_ctrl  IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+				<&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
+			clock-names = "ipg", "ocram", "core", "debug";
+			power-domains = <&pgc_audio>;
+			mbox-names = "tx", "rx", "rxdb";
+			mboxes = <&mu2 0 0>, <&mu2 1 0>, <&mu2 3 0>;
+			firmware-name = "imx/dsp/hifi4.bin";
+			resets = <&audio_blk_ctrl IMX8MP_AUDIOMIX_DSP_RUNSTALL>;
+			reset-names = "runstall";
+			access-controllers = <&aips5
+				IMX8MP_AIPSTZ_HIFI4
+				IMX8MP_AIPSTZ_MASTER
+				(IMX8MP_AIPSTZ_MPL | IMX8MP_AIPSTZ_MTW | IMX8MP_AIPSTZ_MTR)
+			>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index a87d0692c3bb..d48f901487d4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -108,6 +108,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&cpudai>;
 		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,widgets =
 			"Line", "Left Line Out Jack",
 			"Line", "Right Line Out Jack";
@@ -117,11 +118,11 @@
 
 		cpudai: simple-audio-card,cpu {
 			sound-dai = <&sai2>;
+			system-clock-direction-out;
 		};
 
 		link_codec: simple-audio-card,codec {
 			sound-dai = <&wm8524>;
-			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 		};
 	};
 
@@ -374,9 +375,20 @@
 		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
 		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	vph-supply = <&vgen5_reg>;
+	supports-clkreq;
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	status = "disabled";
+};
+
 &pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie1>;
@@ -386,10 +398,22 @@
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
 		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	vpcie-supply = <&reg_pcie1>;
+	vpcie3v3aux-supply = <&reg_pcie1>;
 	vph-supply = <&vgen5_reg>;
+	supports-clkreq;
 	status = "okay";
 };
 
+&pcie1_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	status = "disabled";
+};
+
 &pgc_gpu {
 	power-supply = <&sw1a_reg>;
 };
@@ -420,6 +444,11 @@
 	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
 	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <0>, <24576000>;
+	clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_SAI2_ROOT>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>,
+		<&clk IMX8MQ_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index b268ba7a0e12..d9f203c79519 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -172,7 +172,7 @@
 			"Headphones", "HP_OUT",
 			"Builtin Speaker", "Speaker Amp OUTR",
 			"Speaker Amp INR", "LINE_OUT";
-		simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,hp-det-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai2>;
@@ -979,24 +979,27 @@
 };
 
 &usb_dwc3_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	dr_mode = "otg";
 	status = "okay";
 
-	port@0 {
-		reg = <0>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		typec_hs: endpoint {
-			remote-endpoint = <&usb_con_hs>;
+		port@0 {
+			reg = <0>;
+
+			typec_hs: endpoint {
+				remote-endpoint = <&usb_con_hs>;
+			};
 		};
-	};
 
-	port@1 {
-		reg = <1>;
+		port@1 {
+			reg = <1>;
 
-		typec_ss: endpoint {
-			remote-endpoint = <&usb_con_ss>;
+			typec_ss: endpoint {
+				remote-endpoint = <&usb_con_ss>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 1b39514d5c12..9e0e2d7271ef 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -241,7 +241,7 @@
 			"Headset Mic", "MICBIAS",
 			"IN3R", "Headset Mic",
 			"DMICDAT", "Digital Mic";
-		simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,hp-det-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai2>;
@@ -794,7 +794,6 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "irq";
-		extcon = <&usb3_phy0>;
 		wakeup-source;
 
 		connector {
@@ -1322,25 +1321,28 @@
 };
 
 &usb_dwc3_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	dr_mode = "otg";
 	usb-role-switch;
 	status = "okay";
 
-	port@0 {
-		reg = <0>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		typec_hs: endpoint {
-			remote-endpoint = <&usb_con_hs>;
+		port@0 {
+			reg = <0>;
+
+			typec_hs: endpoint {
+				remote-endpoint = <&usb_con_hs>;
+			};
 		};
-	};
 
-	port@1 {
-		reg = <1>;
+		port@1 {
+			reg = <1>;
 
-		typec_ss: endpoint {
-			remote-endpoint = <&usb_con_ss>;
+			typec_ss: endpoint {
+				remote-endpoint = <&usb_con_ss>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 01e5092e4c40..c92001c80f11 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -254,6 +254,7 @@
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&nvcc_1v8_reg>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 0c960efd9b3d..c7bbba45f368 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -517,8 +517,6 @@
 		eeprom@a4 {
 			compatible = "zii,rave-sp-eeprom";
 			reg = <0xa4 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
 			zii,eeprom-name = "main-eeprom";
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index d51de8d899b2..607962f807be 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -106,7 +106,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -126,7 +125,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -144,7 +142,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -162,7 +159,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -1774,6 +1770,41 @@
 			status = "disabled";
 		};
 
+		pcie0_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mq-pcie-ep";
+			reg = <0x33800000 0x100000>,
+			      <0x18000000 0x8000000>,
+			      <0x33900000 0x100000>,
+			      <0x33b00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+					  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+					  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+						 <&clk IMX8MQ_SYS2_PLL_100M>,
+						 <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+					       <10000000>;
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			fsl,max-link-speed = <2>;
+			status = "disabled";
+		};
+
 		pcie1: pcie@33c00000 {
 			compatible = "fsl,imx8mq-pcie";
 			reg = <0x33c00000 0x400000>,
@@ -1828,6 +1859,7 @@
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dma";
 			fsl,max-link-speed = <2>;
+			linux,pci-domain = <1>;
 			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
 				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
 				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
@@ -1858,6 +1890,7 @@
 			      <0x31000000 0x2000>,	/* GICC */
 			      <0x31010000 0x2000>,	/* GICV */
 			      <0x31020000 0x2000>;	/* GICH */
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
index 81ba8b2831ac..8a37cbe922ac 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
@@ -9,8 +9,14 @@
 
 / {
 	model = "Toradex Apalis iMX8QM V1.1";
-	compatible = "toradex,apalis-imx8-v1.1",
-		     "fsl,imx8qm";
 };
 
-/* TODO: Cooling Maps */
+&cooling_maps_map0 {
+	cooling-device =
+		<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+		<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+		<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+		<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+		<&A72_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+		<&A72_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
index 4d6427fbe875..7594ac61fe56 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
@@ -7,8 +7,6 @@
 
 / {
 	model = "Toradex Apalis iMX8QM";
-	compatible = "toradex,apalis-imx8",
-		     "fsl,imx8qm";
 };
 
 &ethphy0 {
@@ -24,6 +22,10 @@
 	phy-mode = "rgmii-rxid";
 };
 
+&hsio_refa_clk {
+	enable-gpios = <&lsio_gpio4 27 GPIO_ACTIVE_HIGH>;
+};
+
 /* TODO: Apalis HDMI1 */
 
 /* Apalis I2C2 (DDC) */
@@ -190,12 +192,6 @@
 			  "MXM3_291",
 			  "MXM3_289",
 			  "MXM3_287";
-
-	/* Enable pcie root / sata ref clock unconditionally */
-	pcie-sata-hog {
-		gpios = <27 GPIO_ACTIVE_HIGH>;
-	};
-
 };
 
 &lsio_gpio5 {
@@ -318,8 +314,6 @@
 		<IMX8QM_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27			0x00000021>;
 };
 
-/* TODO: On-module Wi-Fi */
-
 /* Apalis MMC1 */
 &usdhc2 {
 	/*
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso
new file mode 100644
index 000000000000..ceb63c28b21a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov5640_mipi_0: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&xtal24m>;
+		clock-names = "xclk";
+		pinctrl-0 = <&pinctrl_mipi_csi0>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&lsio_gpio1 27 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
+
+		port {
+			ov5640_mipi_0_ep: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi0_in>;
+			};
+		};
+	};
+};
+
+&irqsteer_csi0 {
+	status = "okay";
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi0_in: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5640_mipi_0_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso
new file mode 100644
index 000000000000..9e6d33c0315e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c_mipi_csi1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov5640_mipi_1: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&xtal24m>;
+		clock-names = "xclk";
+		pinctrl-0 = <&pinctrl_mipi_csi1>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lsio_gpio1 31 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
+
+		port {
+			ov5640_mipi_1_ep: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi1_in>;
+			};
+		};
+	};
+};
+
+&irqsteer_csi1 {
+	status = "okay";
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi_1 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi1_in: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5640_mipi_1_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 50fd3370f7dc..779d9f78fb81 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -32,6 +32,13 @@
 		reg = <0x00000000 0x80000000 0 0x40000000>;
 	};
 
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -113,6 +120,15 @@
 			reg = <0 0x94300000 0 0x100000>;
 			no-map;
 		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
 	};
 
 	lvds_backlight0: backlight-lvds0 {
@@ -131,12 +147,78 @@
 		default-brightness-level = <80>;
 	};
 
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		mux-gpios = <&lsio_gpio5 3 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */
+		i2c-parent = <&i2c1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8960: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8962: wm8962@1a {
+				compatible = "wlf,wm8962";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				AVDD-supply = <&reg_audio_1v8>;
+				CPVDD-supply = <&reg_audio_1v8>;
+				MICVDD-supply = <&reg_audio_3v3>;
+				PLLVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+	};
+
 	mux-controller {
 		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec_mux>;
-		select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>;
-		enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_LOW>;
 		orientation-switch;
 
 		port {
@@ -146,6 +228,34 @@
 		};
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_2v8: regulator-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usdhc2_vmmc: usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
@@ -155,6 +265,13 @@
 		enable-active-high;
 	};
 
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_fec2_supply: regulator-fec2-nvcc {
 		compatible = "regulator-fixed";
 		regulator-name = "fec2_nvcc";
@@ -213,6 +330,15 @@
 		enable-active-high;
 	};
 
+	reg_usb_otg1_vbus: regulator-usbotg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&lsio_gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_vref_1v8: regulator-adc-vref {
 		compatible = "regulator-fixed";
 		regulator-name = "vref_1v8";
@@ -220,6 +346,33 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	bt_sco_codec: audio-codec-bt {
 		compatible = "linux,bt-sco";
 		#sound-dai-cells = <1>;
@@ -244,13 +397,33 @@
 		};
 	};
 
+	sound-cs42888 {
+		compatible = "fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai0>;
+		audio-codec = <&cs42888>;
+		audio-asrc = <&asrc0>;
+		audio-routing = "Line Out Jack", "AOUT1L",
+				"Line Out Jack", "AOUT1R",
+				"Line Out Jack", "AOUT2L",
+				"Line Out Jack", "AOUT2R",
+				"Line Out Jack", "AOUT3L",
+				"Line Out Jack", "AOUT3R",
+				"Line Out Jack", "AOUT4L",
+				"Line Out Jack", "AOUT4R",
+				"AIN1L", "Line In Jack",
+				"AIN1R", "Line In Jack",
+				"AIN2L", "Line In Jack",
+				"AIN2R", "Line In Jack";
+	};
+
 	sound-wm8960 {
 		compatible = "fsl,imx-audio-wm8960";
 		model = "wm8960-audio";
 		audio-cpu = <&sai1>;
 		audio-codec = <&wm8960>;
-		hp-det-gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
-		audio-routing =	"Headphone Jack", "HP_L",
+		hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HP_L",
 				"Headphone Jack", "HP_R",
 				"Ext Spk", "SPK_LP",
 				"Ext Spk", "SPK_LN",
@@ -260,6 +433,21 @@
 				"Mic Jack", "MICB";
 	};
 
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8962>;
+		hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+				"Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL",
+				"Ext Spk", "SPKOUTR",
+				"AMIC", "MICBIAS",
+				"IN1R", "AMIC",
+				"IN3R", "AMIC";
+	};
+
 	imx8qm-cm4-0 {
 		compatible = "fsl,imx8qm-cm4";
 		clocks = <&clk_dummy>;
@@ -322,12 +510,44 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	cs42888: audio-codec@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "mclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cs42888_reset>;
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+		reset-gpios = <&lsio_gpio4 25 GPIO_ACTIVE_LOW>;
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
+	};
 };
 
 &cm41_intmux {
 	status = "okay";
 };
 
+&esai0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai0>;
+	assigned-clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&esai0_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-parents = <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <49152000>, <12288000>, <49152000>;
+	status = "okay";
+};
+
 &hsio_phy {
 	fsl,hsio-cfg = "pciea-pcieb-sata";
 	fsl,refclk-pad-mode = "input";
@@ -362,6 +582,8 @@
 	pressure-sensor@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
+		vdd-supply = <&reg_3v3>;
+		vddio-supply = <&reg_3v3>;
 	};
 
 	max7322: gpio@68 {
@@ -425,21 +647,6 @@
 	scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>;
 	sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>;
 	status = "okay";
-
-	wm8960: audio-codec@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "mclk";
-		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
-				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
-				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
-				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
-		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
-		wlf,shared-lrclk;
-		wlf,hp-cfg = <2 2 3>;
-		wlf,gpio-cfg = <1 3>;
-	};
 };
 
 &i2c1_lvds0 {
@@ -497,6 +704,16 @@
 	status = "okay";
 };
 
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
 &lpuart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart2>;
@@ -586,6 +803,8 @@
 	pinctrl-names = "default";
 	reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pciea>;
+	vpcie3v3aux-supply = <&reg_pciea>;
+	supports-clkreq;
 	status = "okay";
 };
 
@@ -611,8 +830,12 @@
 };
 
 &usdhc1 {
-	pinctrl-names = "default";
+	assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
 	bus-width = <8>;
 	no-sd;
 	no-sdio;
@@ -621,8 +844,10 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>;
@@ -630,10 +855,25 @@
 	status = "okay";
 };
 
+&usbphy1 {
+	status = "okay";
+};
+
 &usb3_phy {
 	status = "okay";
 };
 
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	disable-over-current;
+	status = "okay";
+};
+
 &usbotg3 {
 	status = "okay";
 };
@@ -707,6 +947,38 @@
 	status = "okay";
 };
 
+&thermal_zones {
+	pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device = <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -718,6 +990,26 @@
 		>;
 	};
 
+	pinctrl_cs42888_reset: cs42888_resetgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25			0x0600004c
+		>;
+	};
+
+	pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL		0xc2000020
+			IMX8QM_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA		0xc2000020
+		>;
+	};
+
+	pinctrl_i2c_mipi_csi1: i2c-mipi-csi1grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI1_I2C0_SCL_MIPI_CSI1_I2C0_SCL		0xc2000020
+			IMX8QM_MIPI_CSI1_I2C0_SDA_MIPI_CSI1_I2C0_SDA		0xc2000020
+		>;
+	};
+
 	pinctrl_i2c0: i2c0grp {
 		fsl,pins = <
 			IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL			0x06000021
@@ -752,6 +1044,21 @@
 		>;
 	};
 
+	pinctrl_esai0: esai0grp {
+		fsl,pins = <
+			IMX8QM_ESAI0_FSR_AUD_ESAI0_FSR				0xc6000040
+			IMX8QM_ESAI0_FST_AUD_ESAI0_FST				0xc6000040
+			IMX8QM_ESAI0_SCKR_AUD_ESAI0_SCKR			0xc6000040
+			IMX8QM_ESAI0_SCKT_AUD_ESAI0_SCKT			0xc6000040
+			IMX8QM_ESAI0_TX0_AUD_ESAI0_TX0				0xc6000040
+			IMX8QM_ESAI0_TX1_AUD_ESAI0_TX1				0xc6000040
+			IMX8QM_ESAI0_TX2_RX3_AUD_ESAI0_TX2_RX3			0xc6000040
+			IMX8QM_ESAI0_TX3_RX2_AUD_ESAI0_TX3_RX2			0xc6000040
+			IMX8QM_ESAI0_TX4_RX1_AUD_ESAI0_TX4_RX1			0xc6000040
+			IMX8QM_ESAI0_TX5_RX0_AUD_ESAI0_TX5_RX0			0xc6000040
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
@@ -787,38 +1094,38 @@
 
 	pinctrl_mipi0_lpi2c0: mipi0_lpi2c0grp {
 		fsl,pins = <
-			IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL      0xc6000020
-			IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA      0xc6000020
-			IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19         0x00000020
+			IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0xc6000020
+			IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0xc6000020
+			IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19	0x00000020
 		>;
 	};
 
 	pinctrl_mipi1_lpi2c0: mipi1_lpi2c0grp {
 		fsl,pins = <
-			IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL      0xc6000020
-			IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA      0xc6000020
-			IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23         0x00000020
+			IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL	0xc6000020
+			IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA	0xc6000020
+			IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23	0x00000020
 		>;
 	};
 
 	pinctrl_flexspi0: flexspi0grp {
 		fsl,pins = <
-			IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
-			IMX8QM_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
-			IMX8QM_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
-			IMX8QM_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
-			IMX8QM_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
-			IMX8QM_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
-			IMX8QM_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B     0x06000021
-			IMX8QM_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
-			IMX8QM_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
-			IMX8QM_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
-			IMX8QM_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
-			IMX8QM_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
-			IMX8QM_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
-			IMX8QM_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
-			IMX8QM_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
-			IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B     0x06000021
+			IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0		0x06000021
+			IMX8QM_QSPI0A_DATA1_LSIO_QSPI0A_DATA1		0x06000021
+			IMX8QM_QSPI0A_DATA2_LSIO_QSPI0A_DATA2		0x06000021
+			IMX8QM_QSPI0A_DATA3_LSIO_QSPI0A_DATA3		0x06000021
+			IMX8QM_QSPI0A_DQS_LSIO_QSPI0A_DQS		0x06000021
+			IMX8QM_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B		0x06000021
+			IMX8QM_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B		0x06000021
+			IMX8QM_QSPI0A_SCLK_LSIO_QSPI0A_SCLK		0x06000021
+			IMX8QM_QSPI0B_SCLK_LSIO_QSPI0B_SCLK		0x06000021
+			IMX8QM_QSPI0B_DATA0_LSIO_QSPI0B_DATA0		0x06000021
+			IMX8QM_QSPI0B_DATA1_LSIO_QSPI0B_DATA1		0x06000021
+			IMX8QM_QSPI0B_DATA2_LSIO_QSPI0B_DATA2		0x06000021
+			IMX8QM_QSPI0B_DATA3_LSIO_QSPI0B_DATA3		0x06000021
+			IMX8QM_QSPI0B_DQS_LSIO_QSPI0B_DQS		0x06000021
+			IMX8QM_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B		0x06000021
+			IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B		0x06000021
 		>;
 	};
 
@@ -868,6 +1175,15 @@
 		>;
 	};
 
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			IMX8QM_UART1_RX_DMA_UART1_RX				0x06000020
+			IMX8QM_UART1_TX_DMA_UART1_TX				0x06000020
+			IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B			0x06000020
+			IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B			0x06000020
+		>;
+	};
+
 	pinctrl_lpuart2: lpuart2grp {
 		fsl,pins = <
 			IMX8QM_UART0_RTS_B_DMA_UART2_RX				0x06000020
@@ -896,6 +1212,22 @@
 		>;
 	};
 
+	pinctrl_mipi_csi0: mipi-csi0grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI0_GPIO0_00_LSIO_GPIO1_IO27		0xC0000041
+			IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28		0xC0000041
+			IMX8QM_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT	0xC0000041
+		>;
+	};
+
+	pinctrl_mipi_csi1: mipi-csi1grp {
+		fsl,pins = <
+			IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30		0xC0000041
+			IMX8QM_MIPI_CSI1_GPIO0_01_LSIO_GPIO1_IO31		0xC0000041
+			IMX8QM_MIPI_CSI1_MCLK_OUT_MIPI_CSI1_ACM_MCLK_OUT	0xC0000041
+		>;
+	};
+
 	pinctrl_pciea: pcieagrp {
 		fsl,pins = <
 			IMX8QM_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28		0x04000021
@@ -961,6 +1293,12 @@
 		>;
 	};
 
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			IMX8QM_USB_SS3_TC0_LSIO_GPIO4_IO03		0x06000021
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041
@@ -988,4 +1326,12 @@
 			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
 		>;
 	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21			0x00000021
+			IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22			0x00000021
+			IMX8QM_USDHC1_RESET_B_LSIO_GPIO4_IO07			0x00000021
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
index e24e639b98ee..7c5386d4ab2b 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
@@ -134,7 +134,7 @@
 	};
 
 	esai1: esai@59810000 {
-		compatible = "fsl,imx8qm-esai";
+		compatible = "fsl,imx8qm-esai", "fsl,imx6ull-esai";
 		reg = <0x59810000 0x10000>;
 		interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&esai1_lpcg IMX_LPCG_CLK_0>,
@@ -327,7 +327,8 @@
 		     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */
 		     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */
 		     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */
-		     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */
+		     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, /* sai5 */
+		     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
 	power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
 			<&pd IMX_SC_R_DMA_2_CH1>,
 			<&pd IMX_SC_R_DMA_2_CH2>,
@@ -365,7 +366,8 @@
 		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */
 		     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai6 */
 		     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai7 */
+		     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* sai7 */
+		     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 	power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
 			<&pd IMX_SC_R_DMA_3_CH1>,
 			<&pd IMX_SC_R_DMA_3_CH2>,
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index d4856b8590e0..5f24850bf322 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -99,7 +99,8 @@
 		     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
+		     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 	power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
 			<&pd IMX_SC_R_DMA_0_CH1>,
 			<&pd IMX_SC_R_DMA_0_CH2>,
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
index b1d0189a1725..bd6e0aa27efe 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
@@ -12,7 +12,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	pciea: pcie@5f000000 {
+	pcie0: pciea: pcie@5f000000 {
 		compatible = "fsl,imx8q-pcie";
 		reg = <0x5f000000 0x10000>,
 		      <0x4ff00000 0x80000>;
@@ -30,10 +30,10 @@
 		clock-names = "dbi", "mstr", "slv";
 		bus-range = <0x00 0xff>;
 		device_type = "pci";
-		interrupt-map = <0 0 0 1 &gic 0 73 4>,
-				<0 0 0 2 &gic 0 74 4>,
-				<0 0 0 3 &gic 0 75 4>,
-				<0 0 0 4 &gic 0 76 4>;
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-map-mask = <0 0 0 0x7>;
 		num-lanes = <1>;
 		num-viewport = <4>;
@@ -42,7 +42,26 @@
 		status = "disabled";
 	};
 
-	pcieb: pcie@5f010000 {
+	pcie0_ep: pciea_ep: pcie-ep@5f000000 {
+		compatible = "fsl,imx8q-pcie-ep";
+		reg = <0x5f000000 0x00010000>,
+		      <0x40000000 0x10000000>;
+		reg-names = "dbi", "addr_space";
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dma";
+		clocks = <&pciea_lpcg IMX_LPCG_CLK_6>,
+			 <&pciea_lpcg IMX_LPCG_CLK_4>,
+			 <&pciea_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "dbi", "mstr", "slv";
+		power-domains = <&pd IMX_SC_R_PCIE_A>;
+		fsl,max-link-speed = <3>;
+		num-ib-windows = <6>;
+		num-ob-windows = <6>;
+		status = "disabled";
+	};
+
+	pcie1: pcieb: pcie@5f010000 {
 		compatible = "fsl,imx8q-pcie";
 		reg = <0x5f010000 0x10000>,
 		      <0x8ff00000 0x80000>;
@@ -50,8 +69,9 @@
 		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
 			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
 		#interrupt-cells = <1>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi", "dma";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
@@ -60,10 +80,10 @@
 		clock-names = "dbi", "mstr", "slv";
 		bus-range = <0x00 0xff>;
 		device_type = "pci";
-		interrupt-map = <0 0 0 1 &gic 0 105 4>,
-				<0 0 0 2 &gic 0 106 4>,
-				<0 0 0 3 &gic 0 107 4>,
-				<0 0 0 4 &gic 0 108 4>;
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-map-mask = <0 0 0 0x7>;
 		num-lanes = <1>;
 		num-viewport = <4>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
index 2bbdacb1313f..4b7e685daa02 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
@@ -3,6 +3,31 @@
  * Copyright 2021 NXP
  */
 
+&isi {
+	compatible = "fsl,imx8qm-isi";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@2 {
+			reg = <2>;
+
+			isi_in_2: endpoint {
+				remote-endpoint = <&mipi_csi0_out>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			isi_in_3: endpoint {
+				remote-endpoint = <&mipi_csi1_out>;
+			};
+		};
+	};
+};
+
 &jpegdec {
 	compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec";
 };
@@ -10,3 +35,57 @@
 &jpegenc {
 	compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
 };
+
+&mipi_csi_0 {
+	compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi0_out: endpoint {
+				remote-endpoint = <&isi_in_2>;
+			};
+		};
+	};
+};
+
+&mipi_csi_1 {
+	compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi1_out: endpoint {
+				remote-endpoint = <&isi_in_3>;
+			};
+		};
+	};
+};
+
+&pi0_ipg_lpcg {
+	status = "disabled";
+};
+
+&pi0_misc_lpcg {
+	status = "disabled";
+};
+
+&pi0_pxl_lpcg {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 6fa31bc9ece8..cb66853b1cd3 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -245,6 +245,7 @@
 		      <0x0 0x52000000 0 0x2000>,  /* GICC */
 		      <0x0 0x52010000 0 0x1000>,  /* GICH */
 		      <0x0 0x52020000 0 0x20000>; /* GICV */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -333,6 +334,11 @@
 			compatible = "fsl,imx8qm-iomuxc";
 		};
 
+		scu_reset: reset-controller {
+			compatible = "fsl,imx-scu-reset";
+			#reset-cells = <1>;
+		};
+
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
@@ -356,9 +362,14 @@
 			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
 			#thermal-sensor-cells = <1>;
 		};
+
+		watchdog {
+			compatible = "fsl,imx8qm-sc-wdt", "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
 	};
 
-	thermal-zones {
+	thermal_zones: thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
@@ -612,6 +623,7 @@
 	};
 
 	/* sorted in register address */
+	#include "imx8-ss-security.dtsi"
 	#include "imx8-ss-cm41.dtsi"
 	#include "imx8-ss-audio.dtsi"
 	#include "imx8-ss-vpu.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso
new file mode 100644
index 000000000000..dd65ed8bb37c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov5640_mipi: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&xtal24m>;
+		clock-names = "xclk";
+		pinctrl-0 = <&pinctrl_mipi_csi0>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lsio_gpio3 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&lsio_gpio3 8 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
+
+		port {
+			ov5640_mipi_ep: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi0_in>;
+			};
+		};
+	};
+};
+
+&irqsteer_csi0 {
+	status = "okay";
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi0_in: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5640_mipi_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index be79c793213a..523f48896b6b 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -40,24 +40,6 @@
 		reg = <0x00000000 0x80000000 0 0x40000000>;
 	};
 
-	reserved-memory {
-		dsp_vdev0vring0: memory@942f0000 {
-			reg = <0 0x942f0000 0 0x8000>;
-			no-map;
-		};
-
-		dsp_vdev0vring1: memory@942f8000 {
-			reg = <0 0x942f8000 0 0x8000>;
-			no-map;
-		};
-
-		dsp_vdev0buffer: memory@94300000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x94300000 0 0x100000>;
-			no-map;
-		};
-	};
-
 	reg_usdhc2_vmmc: usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
@@ -82,6 +64,99 @@
 		};
 	};
 
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		mux-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */
+		i2c-parent = <&cm40_i2c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8960: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+				AVDD-supply = <&reg_audio_3v3>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8962: wm8962@1a {
+				compatible = "wlf,wm8962";
+				reg = <0x1a>;
+				clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				DCVDD-supply = <&reg_audio_1v8>;
+				DBVDD-supply = <&reg_audio_1v8>;
+				AVDD-supply = <&reg_audio_1v8>;
+				CPVDD-supply = <&reg_audio_1v8>;
+				MICVDD-supply = <&reg_audio_3v3>;
+				PLLVDD-supply = <&reg_audio_1v8>;
+				SPKVDD1-supply = <&reg_audio_5v>;
+				SPKVDD2-supply = <&reg_audio_5v>;
+			};
+		};
+	};
+
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_2v8: regulator-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_pcieb: regulator-pcie {
 		compatible = "regulator-fixed";
 		regulator-max-microvolt = <3300000>;
@@ -98,6 +173,33 @@
 		regulator-name = "cs42888_supply";
 	};
 
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	reg_can_en: regulator-can-en {
 		compatible = "regulator-fixed";
 		regulator-max-microvolt = <3300000>;
@@ -117,6 +219,15 @@
 		vin-supply = <&reg_can_en>;
 	};
 
+	reg_fec2_supply: regulator-fec2_nvcc {
+		compatible = "regulator-fixed";
+		regulator-name = "fec2_nvcc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usb_otg1_vbus: regulator-usbotg1-vbus {
 		compatible = "regulator-fixed";
 		regulator-max-microvolt = <5000000>;
@@ -162,6 +273,31 @@
 			no-map;
 		};
 
+		dsp_vdev0vring0: memory@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: memory@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: memory@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+
 		gpu_reserved: memory@880000000 {
 			no-map;
 			reg = <0x8 0x80000000 0 0x10000000>;
@@ -213,7 +349,7 @@
 		model = "wm8960-audio";
 		audio-cpu = <&sai1>;
 		audio-codec = <&wm8960>;
-		hp-det-gpio = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
 		audio-routing = "Headphone Jack", "HP_L",
 				"Headphone Jack", "HP_R",
 				"Ext Spk", "SPK_LP",
@@ -223,6 +359,21 @@
 				"LINPUT1", "Mic Jack",
 				"Mic Jack", "MICB";
 	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8962>;
+		hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+				"Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL",
+				"Ext Spk", "SPKOUTR",
+				"AMIC", "MICBIAS",
+				"IN3R", "AMIC",
+				"IN1R", "AMIC";
+	};
 };
 
 &amix {
@@ -262,6 +413,8 @@
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
+	nvmem-cells = <&fec_mac0>;
+	nvmem-cell-names = "mac-address";
 	fsl,magic-packet;
 	status = "okay";
 
@@ -273,9 +426,26 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
 	};
 };
 
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec2_supply>;
+	fsl,magic-packet;
+	nvmem-cells = <&fec_mac1>;
+	nvmem-cell-names = "mac-address";
+	status = "disabled";
+};
+
 &i2c1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -318,6 +488,8 @@
 			pressure-sensor@60 {
 				compatible = "fsl,mpl3115";
 				reg = <0x60>;
+				vdd-supply = <&reg_3v3>;
+				vddio-supply = <&reg_3v3>;
 			};
 		};
 
@@ -402,24 +574,6 @@
 	sda-gpios = <&lsio_gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	wm8960: audio-codec@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "mclk";
-		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
-				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
-				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
-				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
-		assigned-clock-rates = <786432000>,
-				       <49152000>,
-				       <12288000>,
-				       <12288000>;
-		wlf,shared-lrclk;
-		wlf,hp-cfg = <2 2 3>;
-		wlf,gpio-cfg = <1 3>;
-	};
-
 	pca6416: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
@@ -469,6 +623,20 @@
 	status = "okay";
 };
 
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
 &jpegdec {
 	status = "okay";
 };
@@ -483,6 +651,16 @@
 	status = "okay";
 };
 
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
 &lpuart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart2>;
@@ -507,16 +685,27 @@
 	status = "okay";
 };
 
-&pcieb {
+&pcie0 {
 	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pcieb>;
 	pinctrl-names = "default";
 	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcieb>;
+	vpcie3v3aux-supply = <&reg_pcieb>;
+	supports-clkreq;
 	status = "okay";
 };
 
+&pcie0_ep {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_pcieb>;
+	status = "disabled";
+};
+
 &scu_key {
 	status = "okay";
 };
@@ -603,9 +792,11 @@
 
 &usdhc1 {
 	assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>;
-	assigned-clock-rates = <200000000>;
-	pinctrl-names = "default";
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
 	bus-width = <8>;
 	no-sd;
 	no-sdio;
@@ -616,8 +807,10 @@
 &usdhc2 {
 	assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>;
 	assigned-clock-rates = <200000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
@@ -681,8 +874,8 @@
 
 	pinctrl_cm40_i2c: cm40i2cgrp {
 		fsl,pins = <
-			IMX8QXP_ADC_IN1_M40_I2C0_SDA                            0x0600004c
-			IMX8QXP_ADC_IN0_M40_I2C0_SCL                            0x0600004c
+			IMX8QXP_ADC_IN1_M40_I2C0_SDA				0x0600004c
+			IMX8QXP_ADC_IN0_M40_I2C0_SCL				0x0600004c
 		>;
 	};
 
@@ -695,16 +888,16 @@
 
 	pinctrl_esai0: esai0grp {
 		fsl,pins = <
-			IMX8QXP_ESAI0_FSR_ADMA_ESAI0_FSR           0xc6000040
-			IMX8QXP_ESAI0_FST_ADMA_ESAI0_FST           0xc6000040
-			IMX8QXP_ESAI0_SCKR_ADMA_ESAI0_SCKR         0xc6000040
-			IMX8QXP_ESAI0_SCKT_ADMA_ESAI0_SCKT         0xc6000040
-			IMX8QXP_ESAI0_TX0_ADMA_ESAI0_TX0           0xc6000040
-			IMX8QXP_ESAI0_TX1_ADMA_ESAI0_TX1           0xc6000040
-			IMX8QXP_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3   0xc6000040
-			IMX8QXP_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2   0xc6000040
-			IMX8QXP_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1   0xc6000040
-			IMX8QXP_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0   0xc6000040
+			IMX8QXP_ESAI0_FSR_ADMA_ESAI0_FSR			0xc6000040
+			IMX8QXP_ESAI0_FST_ADMA_ESAI0_FST			0xc6000040
+			IMX8QXP_ESAI0_SCKR_ADMA_ESAI0_SCKR			0xc6000040
+			IMX8QXP_ESAI0_SCKT_ADMA_ESAI0_SCKT			0xc6000040
+			IMX8QXP_ESAI0_TX0_ADMA_ESAI0_TX0			0xc6000040
+			IMX8QXP_ESAI0_TX1_ADMA_ESAI0_TX1			0xc6000040
+			IMX8QXP_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3		0xc6000040
+			IMX8QXP_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2		0xc6000040
+			IMX8QXP_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1		0xc6000040
+			IMX8QXP_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0		0xc6000040
 		>;
 	};
 
@@ -727,6 +920,23 @@
 		>;
 	};
 
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <
+			IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000060
+			IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC			0x00000060
+			IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0		0x00000060
+			IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1		0x00000060
+			IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2			0x00000060
+			IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x00000060
+			IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC			0x00000060
+			IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000060
+			IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0			0x00000060
+			IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1		0x00000060
+			IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2		0x00000060
+			IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3			0x00000060
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan0grp {
 		fsl,pins = <
 			IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX			0x21
@@ -741,6 +951,34 @@
 		>;
 	};
 
+	pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp {
+		fsl,pins = <
+			IMX8QXP_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL		0xc2000020
+			IMX8QXP_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA		0xc2000020
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0			0x06000021
+			IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1			0x06000021
+			IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2			0x06000021
+			IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3			0x06000021
+			IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS			0x06000021
+			IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B			0x06000021
+			IMX8QXP_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B			0x06000021
+			IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK			0x06000021
+			IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK			0x06000021
+			IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0			0x06000021
+			IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1			0x06000021
+			IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2			0x06000021
+			IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3			0x06000021
+			IMX8QXP_QSPI0B_DQS_LSIO_QSPI0B_DQS			0x06000021
+			IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B			0x06000021
+			IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B			0x06000021
+		>;
+	};
+
 	pinctrl_ioexp_rst: ioexprstgrp {
 		fsl,pins = <
 			IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01			0x06000021
@@ -767,17 +1005,34 @@
 		>;
 	};
 
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			IMX8QXP_UART1_TX_ADMA_UART1_TX				0x06000020
+			IMX8QXP_UART1_RX_ADMA_UART1_RX				0x06000020
+			IMX8QXP_UART1_RTS_B_ADMA_UART1_RTS_B			0x06000020
+			IMX8QXP_UART1_CTS_B_ADMA_UART1_CTS_B			0x06000020
+		>;
+	};
+
 	pinctrl_lpuart2: lpuart2grp {
 		fsl,pins = <
-			IMX8QXP_UART2_TX_ADMA_UART2_TX          0x06000020
-			IMX8QXP_UART2_RX_ADMA_UART2_RX          0x06000020
+			IMX8QXP_UART2_TX_ADMA_UART2_TX				0x06000020
+			IMX8QXP_UART2_RX_ADMA_UART2_RX				0x06000020
 		>;
 	};
 
 	pinctrl_lpuart3: lpuart3grp {
 		fsl,pins = <
-			IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX       0x06000020
-			IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX       0x06000020
+			IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX			0x06000020
+			IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX			0x06000020
+		>;
+	};
+
+	pinctrl_mipi_csi0: mipi-csi0grp {
+		fsl,pins = <
+			IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07		0xC0000041
+			IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08		0xC0000041
+			IMX8QXP_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT	0xC0000041
 		>;
 	};
 
@@ -791,13 +1046,13 @@
 
 	pinctrl_typec: typecgrp {
 		fsl,pins = <
-			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
+			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03			0x06000021
 		>;
 	};
 
 	pinctrl_typec_mux: typecmuxgrp {
 		fsl,pins = <
-			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09           0x60
+			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09		0x60
 		>;
 	};
 
@@ -812,11 +1067,11 @@
 
 	pinctrl_sai1: sai1grp {
 		fsl,pins = <
-			IMX8QXP_SAI1_RXD_ADMA_SAI1_RXD     0x06000040
-			IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC     0x06000040
-			IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS   0x06000040
-			IMX8QXP_SPI0_CS1_ADMA_SAI1_TXD     0x06000060
-			IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00   0x06000040
+			IMX8QXP_SAI1_RXD_ADMA_SAI1_RXD				0x06000040
+			IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC				0x06000040
+			IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS			0x06000040
+			IMX8QXP_SPI0_CS1_ADMA_SAI1_TXD				0x06000060
+			IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00			0x06000040
 		>;
 	};
 
@@ -836,6 +1091,14 @@
 		>;
 	};
 
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19			0x00000021
+			IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21			0x00000021
+			IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22			0x00000021
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
index 47fc6e0cff4a..255b8c91c88c 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
@@ -38,4 +38,10 @@
 		power-domains = <&pd IMX_SC_R_SERDES_1>;
 		status = "disabled";
 	};
+
+	pcie0: pcie@5f010000 {
+	};
+
+	pcie0_ep: pcie-ep@5f010000 {
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
index 3a087317591d..232cf25dadfc 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
@@ -4,6 +4,86 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+&csi1_pxl_lpcg {
+	status = "disabled";
+};
+
+&csi1_core_lpcg {
+	status = "disabled";
+};
+
+&csi1_esc_lpcg {
+	status = "disabled";
+};
+
+&gpio0_mipi_csi1 {
+	status = "disabled";
+};
+
+&i2c_mipi_csi1 {
+	status = "disabled";
+};
+
+&irqsteer_csi1 {
+	status = "disabled";
+};
+
+&isi {
+	compatible = "fsl,imx8qxp-isi";
+	reg = <0x58100000 0x60000>;
+	interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+		 <&pdma5_lpcg IMX_LPCG_CLK_0>;
+	clock-names = "per0", "per1", "per2", "per3", "per4", "per5";
+	power-domains = <&pd IMX_SC_R_ISI_CH0>,
+			<&pd IMX_SC_R_ISI_CH1>,
+			<&pd IMX_SC_R_ISI_CH2>,
+			<&pd IMX_SC_R_ISI_CH3>,
+			<&pd IMX_SC_R_ISI_CH4>,
+			<&pd IMX_SC_R_ISI_CH5>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@2 {
+			reg = <2>;
+
+			isi_in_2: endpoint {
+				remote-endpoint = <&mipi_csi0_out>;
+			};
+		};
+	};
+};
+
+&mipi_csi_0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			mipi_csi0_out: endpoint {
+				remote-endpoint = <&isi_in_2>;
+			};
+		};
+	};
+};
+
 &jpegdec {
 	compatible = "nxp,imx8qxp-jpgdec";
 };
@@ -11,3 +91,7 @@
 &jpegenc {
 	compatible = "nxp,imx8qxp-jpgenc";
 };
+
+&mipi_csi_1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi
new file mode 100644
index 000000000000..15f1239dab24
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2025 Actia Nordic AB
+ */
+
+&crypto {
+	compatible = "fsl,imx8qxp-caam", "fsl,sec-v4.0";
+};
+
+&sec_jr2 {
+	compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring";
+};
+
+&sec_jr3 {
+	compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts
new file mode 100644
index 000000000000..3fa9b5aee2c3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps-mb-smarc-2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-tqma8xqps.dtsi"
+#include "tqma8xxs-mb-smarc-2.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQPS on MB-SMARC-2";
+	compatible = "tq,imx8qxp-tqma8xqps-mb-smarc-2", "tq,imx8qxp-tqma8xqps", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi
new file mode 100644
index 000000000000..f008b7a34505
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqps.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8qxp.dtsi"
+#include "tqma8xxs.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQPS";
+	compatible = "tq,imx8qxp-tqma8xqps", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 05138326f0a5..7c4a50e0ec9e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -159,6 +159,7 @@
 		compatible = "arm,gic-v3";
 		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
 		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -233,14 +234,28 @@
 			compatible = "fsl,imx8qxp-scu-ocotp";
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			fec_mac0: mac@2c4 {
+				reg = <0x2c4 6>;
+			};
+
+			fec_mac1: mac@2c6 {
+				reg = <0x2c6 6>;
+			};
 		};
 
 		scu_key: keys {
 			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
 			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
 			status = "disabled";
 		};
 
+		scu_reset: reset-controller {
+			compatible = "fsl,imx-scu-reset";
+			#reset-cells = <1>;
+		};
+
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
@@ -321,6 +336,7 @@
 	/* sorted in register address */
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-security.dtsi"
 	#include "imx8-ss-cm40.dtsi"
 	#include "imx8-ss-gpu0.dtsi"
 	#include "imx8-ss-adma.dtsi"
@@ -332,6 +348,7 @@
 
 #include "imx8qxp-ss-img.dtsi"
 #include "imx8qxp-ss-vpu.dtsi"
+#include "imx8qxp-ss-security.dtsi"
 #include "imx8qxp-ss-adma.dtsi"
 #include "imx8qxp-ss-conn.dtsi"
 #include "imx8qxp-ss-lsio.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts
new file mode 100644
index 000000000000..5497e3d78136
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp-evk.dts"
+
+/ {
+	model = "NXP i.MX8ULP EVK9";
+	compatible = "fsl,imx8ulp-9x9-evk", "fsl,imx8ulp";
+};
+
+&btcpu {
+	sound-dai = <&sai6>;
+};
+
+&iomuxc1 {
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE10__I2S6_TX_BCLK  0x43
+			MX8ULP_PAD_PTE11__I2S6_TX_FS    0x43
+			MX8ULP_PAD_PTE14__I2S6_TXD2     0x43
+			MX8ULP_PAD_PTE6__I2S6_RXD0      0x43
+		>;
+	};
+};
+
+&pinctrl_enet {
+	fsl,pins = <
+		MX8ULP_PAD_PTF9__ENET0_MDC		0x43
+		MX8ULP_PAD_PTF8__ENET0_MDIO             0x43
+		MX8ULP_PAD_PTF5__ENET0_RXER             0x43
+		MX8ULP_PAD_PTF6__ENET0_CRS_DV           0x43
+		MX8ULP_PAD_PTF1__ENET0_RXD0             0x43
+		MX8ULP_PAD_PTF0__ENET0_RXD1             0x43
+		MX8ULP_PAD_PTF4__ENET0_TXEN             0x43
+		MX8ULP_PAD_PTF3__ENET0_TXD0             0x43
+		MX8ULP_PAD_PTF2__ENET0_TXD1             0x43
+		MX8ULP_PAD_PTF7__ENET0_REFCLK           0x43
+		MX8ULP_PAD_PTF10__ENET0_1588_CLKIN      0x43
+	>;
+};
+
+&pinctrl_usb1 {
+	fsl,pins = <
+		MX8ULP_PAD_PTE16__USB0_ID		0x10003
+		MX8ULP_PAD_PTE18__USB0_OC		0x10003
+	>;
+};
+
+&pinctrl_usb2 {
+	fsl,pins = <
+		MX8ULP_PAD_PTD23__USB1_ID		0x10003
+		MX8ULP_PAD_PTE20__USB1_OC		0x10003
+	>;
+};
+
+&sai6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai6>;
+	pinctrl-1 = <&pinctrl_sai6>;
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>, <&cgc2 IMX8ULP_CLK_SAI6_SEL>;
+	assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>;
+	assigned-clock-rates = <12288000>;
+	fsl,dataline = <1 0x01 0x04>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 2562a35286c2..13b01f3aa2a4 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -686,6 +686,7 @@
 					 <&pcc4 IMX8ULP_CLK_PCTLE>;
 				clock-names = "gpio", "port";
 				gpio-ranges = <&iomuxc1 0 32 24>;
+				ngpios = <24>;
 		};
 
 		gpiof: gpio@2d010000 {
@@ -701,6 +702,7 @@
 					 <&pcc4 IMX8ULP_CLK_PCTLF>;
 				clock-names = "gpio", "port";
 				gpio-ranges = <&iomuxc1 0 64 32>;
+				ngpios = <32>;
 		};
 
 		per_bridge5: bus@2d800000 {
@@ -855,6 +857,7 @@
 				 <&pcc5 IMX8ULP_CLK_RGPIOD>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 0 24>;
+			ngpios = <24>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index d5abfdb8ede2..8e9e841cc828 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -52,6 +52,15 @@
 		regulator-name = "vref-1v8";
 	};
 
+	reg_module_wifi: regulator-module-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio_expander_43 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-name = "Wi-Fi_PDn";
+		startup-delay-us = <2000>;
+	};
+
 	reg_usbh_vbus: regulator-usbh-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -261,6 +270,16 @@
 	};
 };
 
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
+&hsio_refb_clk {
+	enable-gpios = <&gpio_expander_43 3 GPIO_ACTIVE_HIGH>;
+};
+
 /* Colibri SPI */
 &lpspi2 {
 	pinctrl-names = "default";
@@ -295,8 +314,8 @@
 			  "",
 			  "SODIMM_61",
 			  "SODIMM_103",
-			  "",
-			  "",
+			  "SODIMM_79",
+			  "SODIMM_97",
 			  "",
 			  "SODIMM_25",
 			  "SODIMM_27",
@@ -443,18 +462,26 @@
 
 /* VPU Mailboxes */
 &mu_m0 {
-	status="okay";
+	status = "okay";
 };
 
 &mu1_m0 {
-	status="okay";
+	status = "okay";
 };
 
 /* TODO MIPI CSI */
 
 /* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */
 
-/* TODO on-module PCIe for Wi-Fi */
+/* On-module PCIe for Wi-Fi */
+&pcieb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
 /* On-module I2S */
 &sai0 {
diff --git a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
new file mode 100644
index 000000000000..aca78768dbd4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx91.dtsi"
+
+/ {
+	compatible = "fsl,imx91-11x11-evk", "fsl,imx91";
+	model = "NXP i.MX91 11X11 EVK board";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vref_1v8";
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-pwr";
+		gpio = <&adp5585 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&eqos {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&fec {
+	phy-handle = <&ethphy2>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	pinctrl-names = "default", "sleep";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	audio_codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	inertial-meter@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio3>;
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		pinctrl-names = "default";
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&pcal6524>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2237500>;
+				regulator-min-microvolt = <650000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK4";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK5";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK6";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1600000>;
+				regulator-name = "LDO1";
+			};
+
+			ldo4: LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "LDO4";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+
+	adp5585: io-expander@34 {
+		compatible = "adi,adp5585-00", "adi,adp5585";
+		reg = <0x34>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#pwm-cells = <3>;
+		gpio-reserved-ranges = <5 1>;
+
+		exp-sel-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	ptn5110_2: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x51>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+		status = "okay";
+
+		typec2_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec2_dr_sw: endpoint {
+						remote-endpoint = <&usb2_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	pcf2131: rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&pcal6524>;
+		status = "okay";
+	};
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	usb-role-switch;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	usb-role-switch;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	status = "okay";
+
+	port {
+		usb2_drd_sw: endpoint {
+			remote-endpoint = <&typec2_dr_sw>;
+		};
+	};
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__ENET1_MDC                           0x57e
+			MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO                      0x57e
+			MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                  0x57e
+			MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                  0x57e
+			MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                  0x57e
+			MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                  0x57e
+			MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC                  0x5fe
+			MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL            0x57e
+			MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                  0x57e
+			MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1                     0x57e
+			MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                  0x57e
+			MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                  0x57e
+			MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK  0x5fe
+			MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL            0x57e
+		>;
+	};
+
+	pinctrl_eqos_sleep: eqossleepgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__GPIO4_IO0                           0x31e
+			MX91_PAD_ENET1_MDIO__GPIO4_IO1                          0x31e
+			MX91_PAD_ENET1_RD0__GPIO4_IO10                          0x31e
+			MX91_PAD_ENET1_RD1__GPIO4_IO11                          0x31e
+			MX91_PAD_ENET1_RD2__GPIO4_IO12                          0x31e
+			MX91_PAD_ENET1_RD3__GPIO4_IO13                          0x31e
+			MX91_PAD_ENET1_RXC__GPIO4_IO9                           0x31e
+			MX91_PAD_ENET1_RX_CTL__GPIO4_IO8                        0x31e
+			MX91_PAD_ENET1_TD0__GPIO4_IO5                           0x31e
+			MX91_PAD_ENET1_TD1__GPIO4_IO4                           0x31e
+			MX91_PAD_ENET1_TD2__GPIO4_IO3                           0x31e
+			MX91_PAD_ENET1_TD3__GPIO4_IO2                           0x31e
+			MX91_PAD_ENET1_TXC__GPIO4_IO7                           0x31e
+			MX91_PAD_ENET1_TX_CTL__GPIO4_IO6                        0x31e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDC__ENET2_MDC                           0x57e
+			MX91_PAD_ENET2_MDIO__ENET2_MDIO                         0x57e
+			MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0                     0x57e
+			MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1                     0x57e
+			MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2                     0x57e
+			MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3                     0x57e
+			MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC                     0x5fe
+			MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL               0x57e
+			MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0                     0x57e
+			MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1                     0x57e
+			MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2                     0x57e
+			MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3                     0x57e
+			MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC                     0x5fe
+			MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL               0x57e
+		>;
+	};
+
+	pinctrl_fec_sleep: fecsleepgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDC__GPIO4_IO14                          0x51e
+			MX91_PAD_ENET2_MDIO__GPIO4_IO15                         0x51e
+			MX91_PAD_ENET2_RD0__GPIO4_IO24                          0x51e
+			MX91_PAD_ENET2_RD1__GPIO4_IO25                          0x51e
+			MX91_PAD_ENET2_RD2__GPIO4_IO26                          0x51e
+			MX91_PAD_ENET2_RD3__GPIO4_IO27                          0x51e
+			MX91_PAD_ENET2_RXC__GPIO4_IO23                          0x51e
+			MX91_PAD_ENET2_RX_CTL__GPIO4_IO22                       0x51e
+			MX91_PAD_ENET2_TD0__GPIO4_IO19                          0x51e
+			MX91_PAD_ENET2_TD1__GPIO4_IO18                          0x51e
+			MX91_PAD_ENET2_TD2__GPIO4_IO17                          0x51e
+			MX91_PAD_ENET2_TD3__GPIO4_IO16                          0x51e
+			MX91_PAD_ENET2_TXC__GPIO4_IO21                          0x51e
+			MX91_PAD_ENET2_TX_CTL__GPIO4_IO20                       0x51e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX91_PAD_I2C1_SCL__LPI2C1_SCL                           0x40000b9e
+			MX91_PAD_I2C1_SDA__LPI2C1_SDA                           0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX91_PAD_I2C2_SCL__LPI2C2_SCL                           0x40000b9e
+			MX91_PAD_I2C2_SDA__LPI2C2_SDA                           0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX91_PAD_GPIO_IO28__LPI2C3_SDA                          0x40000b9e
+			MX91_PAD_GPIO_IO29__LPI2C3_SCL                          0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX91_PAD_CCM_CLKO2__GPIO3_IO27                          0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_RESET_B__GPIO3_IO7                         0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX91_PAD_UART1_RXD__LPUART1_RX                          0x31e
+			MX91_PAD_UART1_TXD__LPUART1_TX                          0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX                   0x31e
+			MX91_PAD_DAP_TDI__LPUART5_RX                            0x31e
+			MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                   0x31e
+			MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                  0x31e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x158e
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x138e
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x138e
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x138e
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x138e
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x138e
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x138e
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x138e
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x138e
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x138e
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x15fe
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x13fe
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x13fe
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x13fe
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x13fe
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x13fe
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x13fe
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x13fe
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x13fe
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x13fe
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x15fe
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x1582
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x1382
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x1382
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x1382
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x1382
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x1382
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x1382
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x1382
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x1382
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x1382
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x1582
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x158e
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x138e
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x138e
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x138e
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x138e
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x138e
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x15fe
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x13fe
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x13fe
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x13fe
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x13fe
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x13fe
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0                            0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0                            0x51e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x1582
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x1382
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x1382
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x1382
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x1382
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x1382
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__GPIO3_IO1                             0x51e
+			MX91_PAD_SD2_CMD__GPIO3_IO2                             0x51e
+			MX91_PAD_SD2_DATA0__GPIO3_IO3                           0x51e
+			MX91_PAD_SD2_DATA1__GPIO3_IO4                           0x51e
+			MX91_PAD_SD2_DATA2__GPIO3_IO5                           0x51e
+			MX91_PAD_SD2_DATA3__GPIO3_IO6                           0x51e
+			MX91_PAD_SD2_VSELECT__GPIO3_IO19                        0x51e
+		>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts
new file mode 100644
index 000000000000..7b18a58024f5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Christoph Stoidner <c.stoidner@phytec.de>
+ *
+ * Product homepage:
+ * phyBOARD-Segin carrier board is reused for the i.MX91 design.
+ * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
+ */
+/dts-v1/;
+
+#include "imx91-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX91";
+	compatible = "phytec,imx91-phyboard-segin", "phytec,imx91-phycore-som",
+		     "fsl,imx91";
+
+	aliases {
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	flexcan1_tc: can-phy0 {
+		/* TI SN65HVD234D CAN-CC 1MBit/s */
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_tc>;
+		enable-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sound_1v8: regulator-sound-1v8 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VCC1V8_AUDIO";
+	};
+
+	reg_sound_3v3: regulator-sound-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC3V3_ANALOG";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_OTG1_VBUS";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_OTG2_VBUS";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_SD";
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&audio_codec>;
+			clocks = <&clk IMX93_CLK_SAI1>;
+		};
+	};
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <100000000>, <50000000>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-id0022.1561";
+		reg = <2>;
+		clocks = <&clk IMX91_CLK_ENET2_REGULAR>;
+		clock-names = "rmii-ref";
+		micrel,led-mode = <1>;
+	};
+};
+
+/* CAN */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_tc>;
+	status = "okay";
+};
+
+/* I2C2 */
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2_gpio>;
+	scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	/* Codec */
+	audio_codec: audio-codec@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+	};
+
+	/* RTC */
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Audio */
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <19200000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* USB  */
+&usbphynop1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+};
+
+&usbphynop2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+};
+
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK	0x4000050e
+			MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x50e
+			MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1		0x50e
+			MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x50e
+			MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER		0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX91_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX91_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan1_tc: flexcan1tcgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_TD3__GPIO4_IO16		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX91_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX91_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2_gpio: lpi2c2gpiogrp {
+		fsl,pins = <
+			MX91_PAD_I2C2_SCL__GPIO1_IO2		0x31e
+			MX91_PAD_I2C2_SDA__GPIO1_IO3		0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_RESET_B__GPIO3_IO7		0x31e
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_RD2__GPIO4_IO26		0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX91_PAD_UART2_RXD__SAI1_MCLK		0x1202
+			MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x1202
+			MX91_PAD_SAI1_TXC__SAI1_TX_BCLK		0x1202
+			MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0	0x1402
+			MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0	0x1402
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX91_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX91_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_default: usdhc2grp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX91_PAD_SD2_CMD__USDHC2_CMD		0x1382
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0	0x1386
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX91_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX91_PAD_SD2_CMD__USDHC2_CMD		0x138e
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0	0x139e
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1	0x139e
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi
new file mode 100644
index 000000000000..29a428a052b0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Christoph Stoidner <c.stoidner@phytec.de>
+ *
+ * Product homepage:
+ * https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
+ */
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx91.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX91";
+	compatible = "phytec,imx91-phycore-som", "fsl,imx91";
+
+	aliases {
+		ethernet0 = &fec;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vdda_1v8: regulator-vdda-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDA_1V8";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		vin-supply = <&buck5>;
+	};
+};
+
+/* ADC */
+&adc1 {
+	vref-supply = <&reg_vdda_1v8>;
+};
+
+/* Ethernet */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+
+	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+			  <&clk IMX91_CLK_ENET2_REGULAR>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <100000000>, <50000000>;
+	status = "okay";
+
+	mdio: mdio {
+		clock-frequency = <5000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+			reset-assert-us = <30>;
+		};
+	};
+};
+
+/* I2C3 */
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3_gpio>;
+	scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <610000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDDQ_0V6";
+				regulator-max-microvolt = <600000>;
+				regulator-min-microvolt = <600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3V3_BUCK";
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "VDD_1V1";
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "PMIC_SNVS_1V8";
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "VDD_0V8";
+				regulator-max-microvolt = <800000>;
+				regulator-min-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&buck4>;
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+/* Watchdog */
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDC__ENET2_MDC			0x50e
+			MX91_PAD_ENET2_MDIO__ENET2_MDIO			0x502
+			/* the three pins below are connected to PHYs straps,
+			 * that is what the pull-up/down setting is for.
+			 */
+			MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0		0x37e
+			MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1		0x37e
+			MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL	0x57e
+			MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0		0x50e
+			MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1		0x50e
+			MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL	0x50e
+			MX91_PAD_ENET2_TD2__ENET2_TX_CLK2		0x4000050e
+			MX91_PAD_ENET2_RXC__GPIO4_IO23			0x51e
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX91_PAD_I2C1_SDA__GPIO1_IO1		0x11e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX91_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX91_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3_gpio: lpi2c3gpiogrp {
+		fsl,pins = <
+			MX91_PAD_GPIO_IO28__GPIO2_IO28		0x31e
+			MX91_PAD_GPIO_IO29__GPIO2_IO29		0x31e
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_RD3__GPIO4_IO27		0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK		0x179e
+			MX91_PAD_SD1_CMD__USDHC1_CMD		0x1386
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1	0x1386
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3	0x1386
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4	0x1386
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5	0x1386
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6	0x1386
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7	0x1386
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX91_PAD_SD1_CMD__USDHC1_CMD		0x139e
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1	0x139e
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2	0x13be
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3	0x139e
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4	0x139e
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5	0x139e
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6	0x139e
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7	0x139e
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX91_PAD_SD1_CMD__USDHC1_CMD		0x139e
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0	0x139e
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1	0x13be
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2	0x13be
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3	0x13be
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4	0x13be
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5	0x13be
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6	0x13be
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7	0x13be
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-pinfunc.h b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
new file mode 100644
index 000000000000..3e19945f5ce3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
@@ -0,0 +1,770 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2025 NXP
+ */
+
+#ifndef __DTS_IMX91_PINFUNC_H
+#define __DTS_IMX91_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX91_PAD_DAP_TDI__JTAG_MUX_TDI                                           0x0000 0x01b0 0x03d8 0x00 0x00
+#define MX91_PAD_DAP_TDI__MQS2_LEFT                                              0x0000 0x01b0 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDI__CAN2_TX                                                0x0000 0x01b0 0x0000 0x03 0x00
+#define MX91_PAD_DAP_TDI__FLEXIO2_FLEXIO30                                       0x0000 0x01b0 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDI__GPIO3_IO28                                             0x0000 0x01b0 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDI__LPUART5_RX                                             0x0000 0x01b0 0x0488 0x06 0x00
+
+#define MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS                                     0x0004 0x01b4 0x03dc 0x00 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31                                 0x0004 0x01b4 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__GPIO3_IO29                                       0x0004 0x01b4 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                                    0x0004 0x01b4 0x0000 0x06 0x00
+
+#define MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK                                    0x0008 0x01b8 0x03d4 0x00 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30                                0x0008 0x01b8 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__GPIO3_IO30                                      0x0008 0x01b8 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                                   0x0008 0x01b8 0x0484 0x06 0x00
+
+#define MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO                                  0x000c 0x01bc 0x0000 0x00 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT                                    0x000c 0x01bc 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__CAN2_RX                                       0x000c 0x01bc 0x0364 0x03 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31                              0x000c 0x01bc 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__GPIO3_IO31                                    0x000c 0x01bc 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX                                    0x000c 0x01bc 0x048c 0x06 0x00
+
+#define MX91_PAD_GPIO_IO00__GPIO2_IO0                                            0x0010 0x01c0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO00__LPI2C3_SDA                                           0x0010 0x01c0 0x03f4 0x01 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK                                     0x0010 0x01c0 0x04bc 0x02 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK                                    0x0010 0x01c0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO00__LPSPI6_PCS0                                          0x0010 0x01c0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO00__LPUART5_TX                                           0x0010 0x01c0 0x048c 0x05 0x01
+#define MX91_PAD_GPIO_IO00__LPI2C5_SDA                                           0x0010 0x01c0 0x0404 0x06 0x00
+#define MX91_PAD_GPIO_IO00__FLEXIO1_FLEXIO0                                      0x0010 0x01c0 0x036c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO01__GPIO2_IO1                                            0x0014 0x01c4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO01__LPI2C3_SCL                                           0x0014 0x01c4 0x03f0 0x01 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA0                                   0x0014 0x01c4 0x0490 0x02 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE                                     0x0014 0x01c4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO01__LPSPI6_SIN                                           0x0014 0x01c4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO01__LPUART5_RX                                           0x0014 0x01c4 0x0488 0x05 0x01
+#define MX91_PAD_GPIO_IO01__LPI2C5_SCL                                           0x0014 0x01c4 0x0400 0x06 0x00
+#define MX91_PAD_GPIO_IO01__FLEXIO1_FLEXIO1                                      0x0014 0x01c4 0x0370 0x07 0x00
+
+#define MX91_PAD_GPIO_IO02__GPIO2_IO2                                            0x0018 0x01c8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO02__LPI2C4_SDA                                           0x0018 0x01c8 0x03fc 0x01 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC                                   0x0018 0x01c8 0x04c0 0x02 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC                                  0x0018 0x01c8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO02__LPSPI6_SOUT                                          0x0018 0x01c8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO02__LPUART5_CTS_B                                        0x0018 0x01c8 0x0484 0x05 0x01
+#define MX91_PAD_GPIO_IO02__LPI2C6_SDA                                           0x0018 0x01c8 0x040c 0x06 0x00
+#define MX91_PAD_GPIO_IO02__FLEXIO1_FLEXIO2                                      0x0018 0x01c8 0x0374 0x07 0x00
+
+#define MX91_PAD_GPIO_IO03__GPIO2_IO3                                            0x001c 0x01cc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C4_SCL                                           0x001c 0x01cc 0x03f8 0x01 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC                                   0x001c 0x01cc 0x04b8 0x02 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC                                  0x001c 0x01cc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO03__LPSPI6_SCK                                           0x001c 0x01cc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO03__LPUART5_RTS_B                                        0x001c 0x01cc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C6_SCL                                           0x001c 0x01cc 0x0408 0x06 0x00
+#define MX91_PAD_GPIO_IO03__FLEXIO1_FLEXIO3                                      0x001c 0x01cc 0x0378 0x07 0x00
+
+#define MX91_PAD_GPIO_IO04__GPIO2_IO4                                            0x0020 0x01d0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO04__TPM3_CH0                                             0x0020 0x01d0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO04__PDM_CLK                                              0x0020 0x01d0 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0                                  0x0020 0x01d0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO04__LPSPI7_PCS0                                          0x0020 0x01d0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO04__LPUART6_TX                                           0x0020 0x01d0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO04__LPI2C6_SDA                                           0x0020 0x01d0 0x040c 0x06 0x01
+#define MX91_PAD_GPIO_IO04__FLEXIO1_FLEXIO4                                      0x0020 0x01d0 0x037c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO05__GPIO2_IO5                                            0x0024 0x01d4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO05__TPM4_CH0                                             0x0024 0x01d4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO05__PDM_BIT_STREAM0                                      0x0024 0x01d4 0x04c4 0x02 0x00
+#define MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1                                  0x0024 0x01d4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO05__LPSPI7_SIN                                           0x0024 0x01d4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO05__LPUART6_RX                                           0x0024 0x01d4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO05__LPI2C6_SCL                                           0x0024 0x01d4 0x0408 0x06 0x01
+#define MX91_PAD_GPIO_IO05__FLEXIO1_FLEXIO5                                      0x0024 0x01d4 0x0380 0x07 0x00
+
+#define MX91_PAD_GPIO_IO06__GPIO2_IO6                                            0x0028 0x01d8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO06__TPM5_CH0                                             0x0028 0x01d8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO06__PDM_BIT_STREAM1                                      0x0028 0x01d8 0x04c8 0x02 0x00
+#define MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2                                  0x0028 0x01d8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO06__LPSPI7_SOUT                                          0x0028 0x01d8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO06__LPUART6_CTS_B                                        0x0028 0x01d8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO06__LPI2C7_SDA                                           0x0028 0x01d8 0x0414 0x06 0x00
+#define MX91_PAD_GPIO_IO06__FLEXIO1_FLEXIO6                                      0x0028 0x01d8 0x0384 0x07 0x00
+
+#define MX91_PAD_GPIO_IO07__GPIO2_IO7                                            0x002c 0x01dc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI3_PCS1                                          0x002c 0x01dc 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA1                                   0x002c 0x01dc 0x0494 0x02 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3                                  0x002c 0x01dc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI7_SCK                                           0x002c 0x01dc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO07__LPUART6_RTS_B                                        0x002c 0x01dc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO07__LPI2C7_SCL                                           0x002c 0x01dc 0x0410 0x06 0x00
+#define MX91_PAD_GPIO_IO07__FLEXIO1_FLEXIO7                                      0x002c 0x01dc 0x0388 0x07 0x00
+
+#define MX91_PAD_GPIO_IO08__GPIO2_IO8                                            0x0030 0x01e0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO08__LPSPI3_PCS0                                          0x0030 0x01e0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA2                                   0x0030 0x01e0 0x0498 0x02 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4                                  0x0030 0x01e0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO08__TPM6_CH0                                             0x0030 0x01e0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO08__LPUART7_TX                                           0x0030 0x01e0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO08__LPI2C7_SDA                                           0x0030 0x01e0 0x0414 0x06 0x01
+#define MX91_PAD_GPIO_IO08__FLEXIO1_FLEXIO8                                      0x0030 0x01e0 0x038c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO09__GPIO2_IO9                                            0x0034 0x01e4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO09__LPSPI3_SIN                                           0x0034 0x01e4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA3                                   0x0034 0x01e4 0x049c 0x02 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5                                  0x0034 0x01e4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO09__TPM3_EXTCLK                                          0x0034 0x01e4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO09__LPUART7_RX                                           0x0034 0x01e4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO09__LPI2C7_SCL                                           0x0034 0x01e4 0x0410 0x06 0x01
+#define MX91_PAD_GPIO_IO09__FLEXIO1_FLEXIO9                                      0x0034 0x01e4 0x0390 0x07 0x00
+
+#define MX91_PAD_GPIO_IO10__GPIO2_IO10                                           0x0038 0x01e8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO10__LPSPI3_SOUT                                          0x0038 0x01e8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA4                                   0x0038 0x01e8 0x04a0 0x02 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6                                  0x0038 0x01e8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO10__TPM4_EXTCLK                                          0x0038 0x01e8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO10__LPUART7_CTS_B                                        0x0038 0x01e8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO10__LPI2C8_SDA                                           0x0038 0x01e8 0x041c 0x06 0x00
+#define MX91_PAD_GPIO_IO10__FLEXIO1_FLEXIO10                                     0x0038 0x01e8 0x0394 0x07 0x00
+
+#define MX91_PAD_GPIO_IO11__GPIO2_IO11                                           0x003c 0x01ec 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO11__LPSPI3_SCK                                           0x003c 0x01ec 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA5                                   0x003c 0x01ec 0x04a4 0x02 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7                                  0x003c 0x01ec 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO11__TPM5_EXTCLK                                          0x003c 0x01ec 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO11__LPUART7_RTS_B                                        0x003c 0x01ec 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO11__LPI2C8_SCL                                           0x003c 0x01ec 0x0418 0x06 0x00
+#define MX91_PAD_GPIO_IO11__FLEXIO1_FLEXIO11                                     0x003c 0x01ec 0x0398 0x07 0x00
+
+#define MX91_PAD_GPIO_IO12__GPIO2_IO12                                           0x0040 0x01f0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO12__TPM3_CH2                                             0x0040 0x01f0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO12__PDM_BIT_STREAM2                                      0x0040 0x01f0 0x04cc 0x02 0x00
+#define MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8                                  0x0040 0x01f0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO12__LPSPI8_PCS0                                          0x0040 0x01f0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO12__LPUART8_TX                                           0x0040 0x01f0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO12__LPI2C8_SDA                                           0x0040 0x01f0 0x041c 0x06 0x01
+#define MX91_PAD_GPIO_IO12__SAI3_RX_SYNC                                         0x0040 0x01f0 0x04dc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO13__GPIO2_IO13                                           0x0044 0x01f4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO13__TPM4_CH2                                             0x0044 0x01f4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO13__PDM_BIT_STREAM3                                      0x0044 0x01f4 0x04d0 0x02 0x00
+#define MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9                                  0x0044 0x01f4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO13__LPSPI8_SIN                                           0x0044 0x01f4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO13__LPUART8_RX                                           0x0044 0x01f4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO13__LPI2C8_SCL                                           0x0044 0x01f4 0x0418 0x06 0x01
+#define MX91_PAD_GPIO_IO13__FLEXIO1_FLEXIO13                                     0x0044 0x01f4 0x039c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO14__GPIO2_IO14                                           0x0048 0x01f8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO14__LPUART3_TX                                           0x0048 0x01f8 0x0474 0x01 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA6                                   0x0048 0x01f8 0x04a8 0x02 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10                                 0x0048 0x01f8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO14__LPSPI8_SOUT                                          0x0048 0x01f8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO14__LPUART8_CTS_B                                        0x0048 0x01f8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO14__LPUART4_TX                                           0x0048 0x01f8 0x0480 0x06 0x00
+#define MX91_PAD_GPIO_IO14__FLEXIO1_FLEXIO14                                     0x0048 0x01f8 0x03a0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO15__GPIO2_IO15                                           0x004c 0x01fc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO15__LPUART3_RX                                           0x004c 0x01fc 0x0470 0x01 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA7                                   0x004c 0x01fc 0x04ac 0x02 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11                                 0x004c 0x01fc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO15__LPSPI8_SCK                                           0x004c 0x01fc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO15__LPUART8_RTS_B                                        0x004c 0x01fc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO15__LPUART4_RX                                           0x004c 0x01fc 0x047c 0x06 0x00
+#define MX91_PAD_GPIO_IO15__FLEXIO1_FLEXIO15                                     0x004c 0x01fc 0x03a4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO16__GPIO2_IO16                                           0x0050 0x0200 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO16__SAI3_TX_BCLK                                         0x0050 0x0200 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO16__PDM_BIT_STREAM2                                      0x0050 0x0200 0x04cc 0x02 0x01
+#define MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12                                 0x0050 0x0200 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO16__LPUART3_CTS_B                                        0x0050 0x0200 0x046c 0x04 0x00
+#define MX91_PAD_GPIO_IO16__LPSPI4_PCS2                                          0x0050 0x0200 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO16__LPUART4_CTS_B                                        0x0050 0x0200 0x0478 0x06 0x00
+#define MX91_PAD_GPIO_IO16__FLEXIO1_FLEXIO16                                     0x0050 0x0200 0x03a8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO17__GPIO2_IO17                                           0x0054 0x0204 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO17__SAI3_MCLK                                            0x0054 0x0204 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA8                                   0x0054 0x0204 0x04b0 0x02 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13                                 0x0054 0x0204 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO17__LPUART3_RTS_B                                        0x0054 0x0204 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO17__LPSPI4_PCS1                                          0x0054 0x0204 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO17__LPUART4_RTS_B                                        0x0054 0x0204 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO17__FLEXIO1_FLEXIO17                                     0x0054 0x0204 0x03ac 0x07 0x00
+
+#define MX91_PAD_GPIO_IO18__GPIO2_IO18                                           0x0058 0x0208 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO18__SAI3_RX_BCLK                                         0x0058 0x0208 0x04d8 0x01 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA9                                   0x0058 0x0208 0x04b4 0x02 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14                                 0x0058 0x0208 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI5_PCS0                                          0x0058 0x0208 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI4_PCS0                                          0x0058 0x0208 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO18__TPM5_CH2                                             0x0058 0x0208 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO18__FLEXIO1_FLEXIO18                                     0x0058 0x0208 0x03b0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO19__GPIO2_IO19                                           0x005c 0x020c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_RX_SYNC                                         0x005c 0x020c 0x04dc 0x01 0x01
+#define MX91_PAD_GPIO_IO19__PDM_BIT_STREAM3                                      0x005c 0x020c 0x04d0 0x02 0x01
+#define MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15                                 0x005c 0x020c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI5_SIN                                           0x005c 0x020c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI4_SIN                                           0x005c 0x020c 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO19__TPM6_CH2                                             0x005c 0x020c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_TX_DATA0                                        0x005c 0x020c 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO20__GPIO2_IO20                                           0x0060 0x0210 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO20__SAI3_RX_DATA0                                        0x0060 0x0210 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO20__PDM_BIT_STREAM0                                      0x0060 0x0210 0x04c4 0x02 0x01
+#define MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16                                 0x0060 0x0210 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI5_SOUT                                          0x0060 0x0210 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI4_SOUT                                          0x0060 0x0210 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO20__TPM3_CH1                                             0x0060 0x0210 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO20__FLEXIO1_FLEXIO20                                     0x0060 0x0210 0x03b4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO21__GPIO2_IO21                                           0x0064 0x0214 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_TX_DATA0                                        0x0064 0x0214 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO21__PDM_CLK                                              0x0064 0x0214 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17                                 0x0064 0x0214 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI5_SCK                                           0x0064 0x0214 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI4_SCK                                           0x0064 0x0214 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO21__TPM4_CH1                                             0x0064 0x0214 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_RX_BCLK                                         0x0064 0x0214 0x04d8 0x07 0x01
+
+#define MX91_PAD_GPIO_IO22__GPIO2_IO22                                           0x0068 0x0218 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO22__USDHC3_CLK                                           0x0068 0x0218 0x04e8 0x01 0x00
+#define MX91_PAD_GPIO_IO22__SPDIF_IN                                             0x0068 0x0218 0x04e4 0x02 0x00
+#define MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18                                 0x0068 0x0218 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO22__TPM5_CH1                                             0x0068 0x0218 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO22__TPM6_EXTCLK                                          0x0068 0x0218 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO22__LPI2C5_SDA                                           0x0068 0x0218 0x0404 0x06 0x01
+#define MX91_PAD_GPIO_IO22__FLEXIO1_FLEXIO22                                     0x0068 0x0218 0x03b8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO23__GPIO2_IO23                                           0x006c 0x021c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO23__USDHC3_CMD                                           0x006c 0x021c 0x04ec 0x01 0x00
+#define MX91_PAD_GPIO_IO23__SPDIF_OUT                                            0x006c 0x021c 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19                                 0x006c 0x021c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO23__TPM6_CH1                                             0x006c 0x021c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO23__LPI2C5_SCL                                           0x006c 0x021c 0x0400 0x06 0x01
+#define MX91_PAD_GPIO_IO23__FLEXIO1_FLEXIO23                                     0x006c 0x021c 0x03bc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO24__GPIO2_IO24                                           0x0070 0x0220 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO24__USDHC3_DATA0                                         0x0070 0x0220 0x04f0 0x01 0x00
+#define MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20                                 0x0070 0x0220 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO24__TPM3_CH3                                             0x0070 0x0220 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO24__JTAG_MUX_TDO                                         0x0070 0x0220 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO24__LPSPI6_PCS1                                          0x0070 0x0220 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO24__FLEXIO1_FLEXIO24                                     0x0070 0x0220 0x03c0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO25__GPIO2_IO25                                           0x0074 0x0224 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO25__USDHC3_DATA1                                         0x0074 0x0224 0x04f4 0x01 0x00
+#define MX91_PAD_GPIO_IO25__CAN2_TX                                              0x0074 0x0224 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21                                 0x0074 0x0224 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO25__TPM4_CH3                                             0x0074 0x0224 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO25__JTAG_MUX_TCK                                         0x0074 0x0224 0x03d4 0x05 0x01
+#define MX91_PAD_GPIO_IO25__LPSPI7_PCS1                                          0x0074 0x0224 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO25__FLEXIO1_FLEXIO25                                     0x0074 0x0224 0x03c4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO26__GPIO2_IO26                                           0x0078 0x0228 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO26__USDHC3_DATA2                                         0x0078 0x0228 0x04f8 0x01 0x00
+#define MX91_PAD_GPIO_IO26__PDM_BIT_STREAM1                                      0x0078 0x0228 0x04c8 0x02 0x01
+#define MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22                                 0x0078 0x0228 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO26__TPM5_CH3                                             0x0078 0x0228 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO26__JTAG_MUX_TDI                                         0x0078 0x0228 0x03d8 0x05 0x01
+#define MX91_PAD_GPIO_IO26__LPSPI8_PCS1                                          0x0078 0x0228 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO26__SAI3_TX_SYNC                                         0x0078 0x0228 0x04e0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO27__GPIO2_IO27                                           0x007c 0x022c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO27__USDHC3_DATA3                                         0x007c 0x022c 0x04fc 0x01 0x00
+#define MX91_PAD_GPIO_IO27__CAN2_RX                                              0x007c 0x022c 0x0364 0x02 0x01
+#define MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23                                 0x007c 0x022c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO27__TPM6_CH3                                             0x007c 0x022c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO27__JTAG_MUX_TMS                                         0x007c 0x022c 0x03dc 0x05 0x01
+#define MX91_PAD_GPIO_IO27__LPSPI5_PCS1                                          0x007c 0x022c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO27__FLEXIO1_FLEXIO27                                     0x007c 0x022c 0x03c8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO28__GPIO2_IO28                                           0x0080 0x0230 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO28__LPI2C3_SDA                                           0x0080 0x0230 0x03f4 0x01 0x01
+#define MX91_PAD_GPIO_IO28__CAN1_TX                                              0x0080 0x0230 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO28__FLEXIO1_FLEXIO28                                     0x0080 0x0230 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO29__GPIO2_IO29                                           0x0084 0x0234 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO29__LPI2C3_SCL                                           0x0084 0x0234 0x03f0 0x01 0x01
+#define MX91_PAD_GPIO_IO29__CAN1_RX                                              0x0084 0x0234 0x0360 0x02 0x00
+#define MX91_PAD_GPIO_IO29__FLEXIO1_FLEXIO29                                     0x0084 0x0234 0x0000 0x07 0x00
+
+#define MX91_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1                                   0x0088 0x0238 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26                                     0x0088 0x0238 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO1__GPIO3_IO26                                           0x0088 0x0238 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO2__GPIO3_IO27                                           0x008c 0x023c 0x0000 0x05 0x00
+#define MX91_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2                                   0x008c 0x023c 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27                                     0x008c 0x023c 0x03c8 0x04 0x01
+
+#define MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3                                   0x0090 0x0240 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28                                     0x0090 0x0240 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO3__GPIO4_IO28                                           0x0090 0x0240 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4                                   0x0094 0x0244 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29                                     0x0094 0x0244 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO4__GPIO4_IO29                                           0x0094 0x0244 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_MDC__ENET1_MDC                                            0x0098 0x0248 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDC__LPUART3_DCB_B                                        0x0098 0x0248 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDC__I3C2_SCL                                             0x0098 0x0248 0x03cc 0x02 0x00
+#define MX91_PAD_ENET1_MDC__HSIOMIX_OTG_ID1                                      0x0098 0x0248 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDC__FLEXIO2_FLEXIO0                                      0x0098 0x0248 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDC__GPIO4_IO0                                            0x0098 0x0248 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDC__LPI2C1_SCL                                           0x0098 0x0248 0x03e0 0x06 0x00
+
+#define MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO                                       0x009c 0x024c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDIO__LPUART3_RIN_B                                       0x009c 0x024c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDIO__I3C2_SDA                                            0x009c 0x024c 0x03d0 0x02 0x00
+#define MX91_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1                                    0x009c 0x024c 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDIO__FLEXIO2_FLEXIO1                                     0x009c 0x024c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDIO__GPIO4_IO1                                           0x009c 0x024c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDIO__LPI2C1_SDA                                          0x009c 0x024c 0x03e4 0x06 0x00
+
+#define MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                                   0x00a0 0x0250 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD3__CAN2_TX                                              0x00a0 0x0250 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD3__HSIOMIX_OTG_ID2                                      0x00a0 0x0250 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD3__FLEXIO2_FLEXIO2                                      0x00a0 0x0250 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD3__GPIO4_IO2                                            0x00a0 0x0250 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD3__LPI2C2_SCL                                           0x00a0 0x0250 0x03e8 0x06 0x00
+
+#define MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                                   0x00a4 0x0254 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK                          0x00a4 0x0254 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD2__CAN2_RX                                              0x00a4 0x0254 0x0364 0x02 0x02
+#define MX91_PAD_ENET1_TD2__HSIOMIX_OTG_OC2                                      0x00a4 0x0254 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD2__FLEXIO2_FLEXIO3                                      0x00a4 0x0254 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD2__GPIO4_IO3                                            0x00a4 0x0254 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD2__LPI2C2_SDA                                           0x00a4 0x0254 0x03ec 0x06 0x00
+
+#define MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1                                      0x00a8 0x0258 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD1__LPUART3_RTS_B                                        0x00a8 0x0258 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR                                             0x00a8 0x0258 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD1__HSIOMIX_OTG_OC1                                      0x00a8 0x0258 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD1__FLEXIO2_FLEXIO4                                      0x00a8 0x0258 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD1__GPIO4_IO4                                            0x00a8 0x0258 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR_B                                           0x00a8 0x0258 0x0000 0x06 0x00
+
+#define MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                                   0x00ac 0x025c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD0__LPUART3_TX                                           0x00ac 0x025c 0x0474 0x01 0x01
+#define MX91_PAD_ENET1_TD0__FLEXIO2_FLEXIO5                                      0x00ac 0x025c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD0__GPIO4_IO5                                            0x00ac 0x025c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL                             0x00b0 0x0260 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPUART3_DTR_B                                     0x00b0 0x0260 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO6                                   0x00b0 0x0260 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TX_CTL__GPIO4_IO6                                         0x00b0 0x0260 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPSPI2_SCK                                        0x00b0 0x0260 0x043c 0x02 0x00
+
+#define MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK                   0x00b4 0x0264 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TXC__ENET_QOS_TX_ER                                       0x00b4 0x0264 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TXC__FLEXIO2_FLEXIO7                                      0x00b4 0x0264 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TXC__GPIO4_IO7                                            0x00b4 0x0264 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TXC__LPSPI2_SIN                                           0x00b4 0x0264 0x0440 0x02 0x00
+
+#define MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL                             0x00b8 0x0268 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPUART3_DSR_B                                     0x00b8 0x0268 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2                                  0x00b8 0x0268 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO8                                   0x00b8 0x0268 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RX_CTL__GPIO4_IO8                                         0x00b8 0x0268 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPSPI2_PCS0                                       0x00b8 0x0268 0x0434 0x02 0x00
+
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC                                   0x00bc 0x026c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER                                       0x00bc 0x026c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RXC__FLEXIO2_FLEXIO9                                      0x00bc 0x026c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RXC__GPIO4_IO9                                            0x00bc 0x026c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RXC__LPSPI2_SOUT                                          0x00bc 0x026c 0x0444 0x02 0x00
+
+#define MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                                   0x00c0 0x0270 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD0__LPUART3_RX                                           0x00c0 0x0270 0x0470 0x01 0x01
+#define MX91_PAD_ENET1_RD0__FLEXIO2_FLEXIO10                                     0x00c0 0x0270 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD0__GPIO4_IO10                                           0x00c0 0x0270 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                                   0x00c4 0x0274 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD1__LPUART3_CTS_B                                        0x00c4 0x0274 0x046c 0x01 0x01
+#define MX91_PAD_ENET1_RD1__LPTMR2_ALT1                                          0x00c4 0x0274 0x0448 0x03 0x00
+#define MX91_PAD_ENET1_RD1__FLEXIO2_FLEXIO11                                     0x00c4 0x0274 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD1__GPIO4_IO11                                           0x00c4 0x0274 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                                   0x00c8 0x0278 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD2__LPTMR2_ALT2                                          0x00c8 0x0278 0x044c 0x03 0x00
+#define MX91_PAD_ENET1_RD2__FLEXIO2_FLEXIO12                                     0x00c8 0x0278 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD2__GPIO4_IO12                                           0x00c8 0x0278 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                                   0x00cc 0x027c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER                              0x00cc 0x027c 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_RD3__LPTMR2_ALT3                                          0x00cc 0x027c 0x0450 0x03 0x00
+#define MX91_PAD_ENET1_RD3__FLEXIO2_FLEXIO13                                     0x00cc 0x027c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD3__GPIO4_IO13                                           0x00cc 0x027c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET2_MDC__ENET2_MDC                                            0x00d0 0x0280 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDC__LPUART4_DCB_B                                        0x00d0 0x0280 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDC__SAI2_RX_SYNC                                         0x00d0 0x0280 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDC__FLEXIO2_FLEXIO14                                     0x00d0 0x0280 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDC__GPIO4_IO14                                           0x00d0 0x0280 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDC__MEDIAMIX_CAM_CLK                                     0x00d0 0x0280 0x04bc 0x06 0x01
+
+#define MX91_PAD_ENET2_MDIO__ENET2_MDIO                                          0x00d4 0x0284 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDIO__LPUART4_RIN_B                                       0x00d4 0x0284 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDIO__SAI2_RX_BCLK                                        0x00d4 0x0284 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15                                    0x00d4 0x0284 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDIO__GPIO4_IO15                                          0x00d4 0x0284 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDIO__MEDIAMIX_CAM_DATA0                                  0x00d4 0x0284 0x0490 0x06 0x01
+
+#define MX91_PAD_ENET2_TD3__SAI2_RX_DATA0                                        0x00d8 0x0288 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TD3__FLEXIO2_FLEXIO16                                     0x00d8 0x0288 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD3__GPIO4_IO16                                           0x00d8 0x0288 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD3__MEDIAMIX_CAM_VSYNC                                   0x00d8 0x0288 0x04c0 0x06 0x01
+#define MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3                                      0x00d8 0x0288 0x0000 0x00 0x00
+
+#define MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2                                      0x00dc 0x028c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD2__ENET2_TX_CLK2                                        0x00dc 0x028c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD2__FLEXIO2_FLEXIO17                                     0x00dc 0x028c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD2__GPIO4_IO17                                           0x00dc 0x028c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD2__MEDIAMIX_CAM_HSYNC                                   0x00dc 0x028c 0x04b8 0x06 0x01
+
+#define MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1                                      0x00e0 0x0290 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD1__LPUART4_RTS_B                                        0x00e0 0x0290 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD1__FLEXIO2_FLEXIO18                                     0x00e0 0x0290 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD1__GPIO4_IO18                                           0x00e0 0x0290 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD1__MEDIAMIX_CAM_DATA1                                   0x00e0 0x0290 0x0494 0x06 0x01
+
+#define MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0                                      0x00e4 0x0294 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD0__LPUART4_TX                                           0x00e4 0x0294 0x0480 0x01 0x01
+#define MX91_PAD_ENET2_TD0__FLEXIO2_FLEXIO19                                     0x00e4 0x0294 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD0__GPIO4_IO19                                           0x00e4 0x0294 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD0__MEDIAMIX_CAM_DATA2                                   0x00e4 0x0294 0x0498 0x06 0x01
+
+#define MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL                                0x00e8 0x0298 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TX_CTL__LPUART4_DTR_B                                     0x00e8 0x0298 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TX_CTL__SAI2_TX_SYNC                                      0x00e8 0x0298 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20                                  0x00e8 0x0298 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TX_CTL__GPIO4_IO20                                        0x00e8 0x0298 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TX_CTL__MEDIAMIX_CAM_DATA3                                0x00e8 0x0298 0x049c 0x06 0x01
+
+#define MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC                                      0x00ec 0x029c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TXC__ENET2_TX_ER                                          0x00ec 0x029c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TXC__SAI2_TX_BCLK                                         0x00ec 0x029c 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TXC__FLEXIO2_FLEXIO21                                     0x00ec 0x029c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TXC__GPIO4_IO21                                           0x00ec 0x029c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TXC__MEDIAMIX_CAM_DATA4                                   0x00ec 0x029c 0x04a0 0x06 0x01
+
+#define MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL                                0x00f0 0x02a0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RX_CTL__LPUART4_DSR_B                                     0x00f0 0x02a0 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RX_CTL__SAI2_TX_DATA0                                     0x00f0 0x02a0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22                                  0x00f0 0x02a0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RX_CTL__GPIO4_IO22                                        0x00f0 0x02a0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RX_CTL__MEDIAMIX_CAM_DATA5                                0x00f0 0x02a0 0x04a4 0x06 0x01
+
+#define MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC                                      0x00f4 0x02a4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RXC__ENET2_RX_ER                                          0x00f4 0x02a4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RXC__FLEXIO2_FLEXIO23                                     0x00f4 0x02a4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RXC__GPIO4_IO23                                           0x00f4 0x02a4 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RXC__MEDIAMIX_CAM_DATA6                                   0x00f4 0x02a4 0x04a8 0x06 0x01
+
+#define MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0                                      0x00f8 0x02a8 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD0__LPUART4_RX                                           0x00f8 0x02a8 0x047c 0x01 0x01
+#define MX91_PAD_ENET2_RD0__FLEXIO2_FLEXIO24                                     0x00f8 0x02a8 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD0__GPIO4_IO24                                           0x00f8 0x02a8 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD0__MEDIAMIX_CAM_DATA7                                   0x00f8 0x02a8 0x04ac 0x06 0x01
+
+#define MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1                                      0x00fc 0x02ac 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD1__SPDIF_IN                                             0x00fc 0x02ac 0x04e4 0x01 0x01
+#define MX91_PAD_ENET2_RD1__FLEXIO2_FLEXIO25                                     0x00fc 0x02ac 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD1__GPIO4_IO25                                           0x00fc 0x02ac 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD1__MEDIAMIX_CAM_DATA8                                   0x00fc 0x02ac 0x04b0 0x06 0x01
+
+#define MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2                                      0x0100 0x02b0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD2__LPUART4_CTS_B                                        0x0100 0x02b0 0x0478 0x01 0x01
+#define MX91_PAD_ENET2_RD2__SAI2_MCLK                                            0x0100 0x02b0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RD2__MQS2_RIGHT                                           0x0100 0x02b0 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD2__FLEXIO2_FLEXIO26                                     0x0100 0x02b0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD2__GPIO4_IO26                                           0x0100 0x02b0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD2__MEDIAMIX_CAM_DATA9                                   0x0100 0x02b0 0x04b4 0x06 0x01
+
+#define MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3                                      0x0104 0x02b4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_OUT                                            0x0104 0x02b4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_IN                                             0x0104 0x02b4 0x04e4 0x02 0x02
+#define MX91_PAD_ENET2_RD3__MQS2_LEFT                                            0x0104 0x02b4 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD3__FLEXIO2_FLEXIO27                                     0x0104 0x02b4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD3__GPIO4_IO27                                           0x0104 0x02b4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD1_CLK__FLEXIO1_FLEXIO8                                        0x0108 0x02b8 0x038c 0x04 0x01
+#define MX91_PAD_SD1_CLK__GPIO3_IO8                                              0x0108 0x02b8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CLK__USDHC1_CLK                                             0x0108 0x02b8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CLK__LPSPI2_SCK                                             0x0108 0x02b8 0x043c 0x03 0x01
+
+#define MX91_PAD_SD1_CMD__USDHC1_CMD                                             0x010c 0x02bc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CMD__FLEXIO1_FLEXIO9                                        0x010c 0x02bc 0x0390 0x04 0x01
+#define MX91_PAD_SD1_CMD__GPIO3_IO9                                              0x010c 0x02bc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CMD__LPSPI2_SIN                                             0x010c 0x02bc 0x0440 0x03 0x01
+
+#define MX91_PAD_SD1_DATA0__USDHC1_DATA0                                         0x0110 0x02c0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA0__FLEXIO1_FLEXIO10                                     0x0110 0x02c0 0x0394 0x04 0x01
+#define MX91_PAD_SD1_DATA0__GPIO3_IO10                                           0x0110 0x02c0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA0__LPSPI2_PCS0                                          0x0110 0x02c0 0x0434 0x03 0x01
+
+#define MX91_PAD_SD1_DATA1__USDHC1_DATA1                                         0x0114 0x02c4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA1__FLEXIO1_FLEXIO11                                     0x0114 0x02c4 0x0398 0x04 0x01
+#define MX91_PAD_SD1_DATA1__GPIO3_IO11                                           0x0114 0x02c4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT                                0x0114 0x02c4 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA1__LPSPI2_SOUT                                          0x0114 0x02c4 0x0444 0x03 0x01
+
+#define MX91_PAD_SD1_DATA2__USDHC1_DATA2                                         0x0118 0x02c8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA2__FLEXIO1_FLEXIO12                                     0x0118 0x02c8 0x0000 0x04 0x00
+#define MX91_PAD_SD1_DATA2__GPIO3_IO12                                           0x0118 0x02c8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY                              0x0118 0x02c8 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA2__LPSPI2_PCS1                                          0x0118 0x02c8 0x0438 0x03 0x00
+
+#define MX91_PAD_SD1_DATA3__USDHC1_DATA3                                         0x011c 0x02cc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B                                     0x011c 0x02cc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA3__FLEXIO1_FLEXIO13                                     0x011c 0x02cc 0x039c 0x04 0x01
+#define MX91_PAD_SD1_DATA3__GPIO3_IO13                                           0x011c 0x02cc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA3__LPSPI1_PCS1                                          0x011c 0x02cc 0x0424 0x03 0x00
+
+#define MX91_PAD_SD1_DATA4__USDHC1_DATA4                                         0x0120 0x02d0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA4__FLEXSPI1_A_DATA4                                     0x0120 0x02d0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA4__FLEXIO1_FLEXIO14                                     0x0120 0x02d0 0x03a0 0x04 0x01
+#define MX91_PAD_SD1_DATA4__GPIO3_IO14                                           0x0120 0x02d0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA4__LPSPI1_PCS0                                          0x0120 0x02d0 0x0420 0x03 0x00
+
+#define MX91_PAD_SD1_DATA5__USDHC1_DATA5                                         0x0124 0x02d4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA5__FLEXSPI1_A_DATA5                                     0x0124 0x02d4 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA5__USDHC1_RESET_B                                       0x0124 0x02d4 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA5__FLEXIO1_FLEXIO15                                     0x0124 0x02d4 0x03a4 0x04 0x01
+#define MX91_PAD_SD1_DATA5__GPIO3_IO15                                           0x0124 0x02d4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA5__LPSPI1_SIN                                           0x0124 0x02d4 0x042c 0x03 0x00
+
+#define MX91_PAD_SD1_DATA6__USDHC1_DATA6                                         0x0128 0x02d8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA6__FLEXSPI1_A_DATA6                                     0x0128 0x02d8 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA6__USDHC1_CD_B                                          0x0128 0x02d8 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA6__FLEXIO1_FLEXIO16                                     0x0128 0x02d8 0x03a8 0x04 0x01
+#define MX91_PAD_SD1_DATA6__GPIO3_IO16                                           0x0128 0x02d8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA6__LPSPI1_SCK                                           0x0128 0x02d8 0x0428 0x03 0x00
+
+#define MX91_PAD_SD1_DATA7__USDHC1_DATA7                                         0x012c 0x02dc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA7__FLEXSPI1_A_DATA7                                     0x012c 0x02dc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA7__USDHC1_WP                                            0x012c 0x02dc 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA7__FLEXIO1_FLEXIO17                                     0x012c 0x02dc 0x03ac 0x04 0x01
+#define MX91_PAD_SD1_DATA7__GPIO3_IO17                                           0x012c 0x02dc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA7__LPSPI1_SOUT                                          0x012c 0x02dc 0x0430 0x03 0x00
+
+#define MX91_PAD_SD1_STROBE__USDHC1_STROBE                                       0x0130 0x02e0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_STROBE__FLEXSPI1_A_DQS                                      0x0130 0x02e0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_STROBE__FLEXIO1_FLEXIO18                                    0x0130 0x02e0 0x03b0 0x04 0x01
+#define MX91_PAD_SD1_STROBE__GPIO3_IO18                                          0x0130 0x02e0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                                     0x0134 0x02e4 0x0000 0x00 0x00
+#define MX91_PAD_SD2_VSELECT__USDHC2_WP                                          0x0134 0x02e4 0x0000 0x01 0x00
+#define MX91_PAD_SD2_VSELECT__LPTMR2_ALT3                                        0x0134 0x02e4 0x0450 0x02 0x01
+#define MX91_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19                                   0x0134 0x02e4 0x0000 0x04 0x00
+#define MX91_PAD_SD2_VSELECT__GPIO3_IO19                                         0x0134 0x02e4 0x0000 0x05 0x00
+#define MX91_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1                              0x0134 0x02e4 0x0368 0x06 0x00
+
+#define MX91_PAD_SD3_CLK__USDHC3_CLK                                             0x0138 0x02e8 0x04e8 0x00 0x01
+#define MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK                                        0x0138 0x02e8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CLK__LPUART1_CTS_B                                          0x0138 0x02e8 0x0454 0x02 0x00
+#define MX91_PAD_SD3_CLK__FLEXIO1_FLEXIO20                                       0x0138 0x02e8 0x03b4 0x04 0x01
+#define MX91_PAD_SD3_CLK__GPIO3_IO20                                             0x0138 0x02e8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_CMD__USDHC3_CMD                                             0x013c 0x02ec 0x04ec 0x00 0x01
+#define MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B                                       0x013c 0x02ec 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CMD__LPUART1_RTS_B                                          0x013c 0x02ec 0x0000 0x02 0x00
+#define MX91_PAD_SD3_CMD__FLEXIO1_FLEXIO21                                       0x013c 0x02ec 0x0000 0x04 0x00
+#define MX91_PAD_SD3_CMD__GPIO3_IO21                                             0x013c 0x02ec 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA0__USDHC3_DATA0                                         0x0140 0x02f0 0x04f0 0x00 0x01
+#define MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0                                     0x0140 0x02f0 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA0__LPUART2_CTS_B                                        0x0140 0x02f0 0x0460 0x02 0x00
+#define MX91_PAD_SD3_DATA0__FLEXIO1_FLEXIO22                                     0x0140 0x02f0 0x03b8 0x04 0x01
+#define MX91_PAD_SD3_DATA0__GPIO3_IO22                                           0x0140 0x02f0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA1__USDHC3_DATA1                                         0x0144 0x02f4 0x04f4 0x00 0x01
+#define MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1                                     0x0144 0x02f4 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA1__LPUART2_RTS_B                                        0x0144 0x02f4 0x0000 0x02 0x00
+#define MX91_PAD_SD3_DATA1__FLEXIO1_FLEXIO23                                     0x0144 0x02f4 0x03bc 0x04 0x01
+#define MX91_PAD_SD3_DATA1__GPIO3_IO23                                           0x0144 0x02f4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA2__USDHC3_DATA2                                         0x0148 0x02f8 0x04f8 0x00 0x01
+#define MX91_PAD_SD3_DATA2__LPI2C4_SDA                                           0x0148 0x02f8 0x03fc 0x02 0x01
+#define MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2                                     0x0148 0x02f8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA2__FLEXIO1_FLEXIO24                                     0x0148 0x02f8 0x03c0 0x04 0x01
+#define MX91_PAD_SD3_DATA2__GPIO3_IO24                                           0x0148 0x02f8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA3__USDHC3_DATA3                                         0x014c 0x02fc 0x04fc 0x00 0x01
+#define MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3                                     0x014c 0x02fc 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA3__LPI2C4_SCL                                           0x014c 0x02fc 0x03f8 0x02 0x01
+#define MX91_PAD_SD3_DATA3__FLEXIO1_FLEXIO25                                     0x014c 0x02fc 0x03c4 0x04 0x01
+#define MX91_PAD_SD3_DATA3__GPIO3_IO25                                           0x014c 0x02fc 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_CD_B__USDHC2_CD_B                                           0x0150 0x0300 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN                               0x0150 0x0300 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CD_B__I3C2_SCL                                              0x0150 0x0300 0x03cc 0x02 0x01
+#define MX91_PAD_SD2_CD_B__FLEXIO1_FLEXIO0                                       0x0150 0x0300 0x036c 0x04 0x01
+#define MX91_PAD_SD2_CD_B__GPIO3_IO0                                             0x0150 0x0300 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CD_B__LPI2C1_SCL                                            0x0150 0x0300 0x03e0 0x03 0x01
+
+#define MX91_PAD_SD2_CLK__USDHC2_CLK                                             0x0154 0x0304 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT                               0x0154 0x0304 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CLK__I2C1_SDA                                               0x0154 0x0304 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CLK__I3C2_SDA                                               0x0154 0x0304 0x03d0 0x02 0x01
+#define MX91_PAD_SD2_CLK__FLEXIO1_FLEXIO1                                        0x0154 0x0304 0x0370 0x04 0x01
+#define MX91_PAD_SD2_CLK__GPIO3_IO1                                              0x0154 0x0304 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0                                  0x0154 0x0304 0x0000 0x06 0x00
+#define MX91_PAD_SD2_CLK__LPI2C1_SDA                                             0x0154 0x0304 0x03e4 0x03 0x01
+
+#define MX91_PAD_SD2_CMD__USDHC2_CMD                                             0x0158 0x0308 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CMD__ENET2_1588_EVENT0_IN                                   0x0158 0x0308 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR                                               0x0158 0x0308 0x0000 0x02 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR_B                                             0x0158 0x0308 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CMD__FLEXIO1_FLEXIO2                                        0x0158 0x0308 0x0374 0x04 0x01
+#define MX91_PAD_SD2_CMD__GPIO3_IO2                                              0x0158 0x0308 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1                                  0x0158 0x0308 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA0__USDHC2_DATA0                                         0x015c 0x030c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA0__ENET2_1588_EVENT0_OUT                                0x015c 0x030c 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA0__CAN2_TX                                              0x015c 0x030c 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA0__FLEXIO1_FLEXIO3                                      0x015c 0x030c 0x0378 0x04 0x01
+#define MX91_PAD_SD2_DATA0__GPIO3_IO3                                            0x015c 0x030c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA0__LPUART1_TX                                           0x015c 0x030c 0x045c 0x03 0x00
+#define MX91_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                                0x015c 0x030c 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA1__USDHC2_DATA1                                         0x0160 0x0310 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA1__ENET2_1588_EVENT1_IN                                 0x0160 0x0310 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA1__CAN2_RX                                              0x0160 0x0310 0x0364 0x02 0x03
+#define MX91_PAD_SD2_DATA1__FLEXIO1_FLEXIO4                                      0x0160 0x0310 0x037c 0x04 0x01
+#define MX91_PAD_SD2_DATA1__GPIO3_IO4                                            0x0160 0x0310 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA1__LPUART1_RX                                           0x0160 0x0310 0x0458 0x03 0x00
+#define MX91_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT                                    0x0160 0x0310 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA2__USDHC2_DATA2                                         0x0164 0x0314 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA2__ENET2_1588_EVENT1_OUT                                0x0164 0x0314 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA2__MQS2_RIGHT                                           0x0164 0x0314 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA2__FLEXIO1_FLEXIO5                                      0x0164 0x0314 0x0380 0x04 0x01
+#define MX91_PAD_SD2_DATA2__GPIO3_IO5                                            0x0164 0x0314 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA2__LPUART2_TX                                           0x0164 0x0314 0x0468 0x03 0x00
+#define MX91_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP                                    0x0164 0x0314 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA3__USDHC2_DATA3                                         0x0168 0x0318 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA3__LPTMR2_ALT1                                          0x0168 0x0318 0x0448 0x01 0x01
+#define MX91_PAD_SD2_DATA3__MQS2_LEFT                                            0x0168 0x0318 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA3__FLEXIO1_FLEXIO6                                      0x0168 0x0318 0x0384 0x04 0x01
+#define MX91_PAD_SD2_DATA3__GPIO3_IO6                                            0x0168 0x0318 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA3__LPUART2_RX                                           0x0168 0x0318 0x0464 0x03 0x00
+#define MX91_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET                             0x0168 0x0318 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_RESET_B__USDHC2_RESET_B                                     0x016c 0x031c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_RESET_B__LPTMR2_ALT2                                        0x016c 0x031c 0x044c 0x01 0x01
+#define MX91_PAD_SD2_RESET_B__FLEXIO1_FLEXIO7                                    0x016c 0x031c 0x0388 0x04 0x01
+#define MX91_PAD_SD2_RESET_B__GPIO3_IO7                                          0x016c 0x031c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET                          0x016c 0x031c 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C1_SCL__LPI2C1_SCL                                            0x0170 0x0320 0x03e0 0x00 0x02
+#define MX91_PAD_I2C1_SCL__I3C1_SCL                                              0x0170 0x0320 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SCL__LPUART1_DCB_B                                         0x0170 0x0320 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SCL__TPM2_CH0                                              0x0170 0x0320 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SCL__GPIO1_IO0                                             0x0170 0x0320 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C1_SDA__LPI2C1_SDA                                            0x0174 0x0324 0x03e4 0x00 0x02
+#define MX91_PAD_I2C1_SDA__I3C1_SDA                                              0x0174 0x0324 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SDA__LPUART1_RIN_B                                         0x0174 0x0324 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SDA__TPM2_CH1                                              0x0174 0x0324 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SDA__GPIO1_IO1                                             0x0174 0x0324 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C2_SCL__LPI2C2_SCL                                            0x0178 0x0328 0x03e8 0x00 0x01
+#define MX91_PAD_I2C2_SCL__I3C1_PUR                                              0x0178 0x0328 0x0000 0x01 0x00
+#define MX91_PAD_I2C2_SCL__LPUART2_DCB_B                                         0x0178 0x0328 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SCL__TPM2_CH2                                              0x0178 0x0328 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SCL__SAI1_RX_SYNC                                          0x0178 0x0328 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SCL__GPIO1_IO2                                             0x0178 0x0328 0x0000 0x05 0x00
+#define MX91_PAD_I2C2_SCL__I3C1_PUR_B                                            0x0178 0x0328 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C2_SDA__LPI2C2_SDA                                            0x017c 0x032c 0x03ec 0x00 0x01
+#define MX91_PAD_I2C2_SDA__LPUART2_RIN_B                                         0x017c 0x032c 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SDA__TPM2_CH3                                              0x017c 0x032c 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SDA__SAI1_RX_BCLK                                          0x017c 0x032c 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SDA__GPIO1_IO3                                             0x017c 0x032c 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_RXD__LPUART1_RX                                           0x0180 0x0330 0x0458 0x00 0x01
+#define MX91_PAD_UART1_RXD__ELE_UART_RX                                          0x0180 0x0330 0x0000 0x01 0x00
+#define MX91_PAD_UART1_RXD__LPSPI2_SIN                                           0x0180 0x0330 0x0440 0x02 0x02
+#define MX91_PAD_UART1_RXD__TPM1_CH0                                             0x0180 0x0330 0x0000 0x03 0x00
+#define MX91_PAD_UART1_RXD__GPIO1_IO4                                            0x0180 0x0330 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_TXD__LPUART1_TX                                           0x0184 0x0334 0x045c 0x00 0x01
+#define MX91_PAD_UART1_TXD__ELE_UART_TX                                          0x0184 0x0334 0x0000 0x01 0x00
+#define MX91_PAD_UART1_TXD__LPSPI2_PCS0                                          0x0184 0x0334 0x0434 0x02 0x02
+#define MX91_PAD_UART1_TXD__TPM1_CH1                                             0x0184 0x0334 0x0000 0x03 0x00
+#define MX91_PAD_UART1_TXD__GPIO1_IO5                                            0x0184 0x0334 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_RXD__LPUART2_RX                                           0x0188 0x0338 0x0464 0x00 0x01
+#define MX91_PAD_UART2_RXD__LPUART1_CTS_B                                        0x0188 0x0338 0x0454 0x01 0x01
+#define MX91_PAD_UART2_RXD__LPSPI2_SOUT                                          0x0188 0x0338 0x0444 0x02 0x02
+#define MX91_PAD_UART2_RXD__TPM1_CH2                                             0x0188 0x0338 0x0000 0x03 0x00
+#define MX91_PAD_UART2_RXD__SAI1_MCLK                                            0x0188 0x0338 0x04d4 0x04 0x00
+#define MX91_PAD_UART2_RXD__GPIO1_IO6                                            0x0188 0x0338 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_TXD__LPUART2_TX                                           0x018c 0x033c 0x0468 0x00 0x01
+#define MX91_PAD_UART2_TXD__LPUART1_RTS_B                                        0x018c 0x033c 0x0000 0x01 0x00
+#define MX91_PAD_UART2_TXD__LPSPI2_SCK                                           0x018c 0x033c 0x043c 0x02 0x02
+#define MX91_PAD_UART2_TXD__TPM1_CH3                                             0x018c 0x033c 0x0000 0x03 0x00
+#define MX91_PAD_UART2_TXD__GPIO1_IO7                                            0x018c 0x033c 0x0000 0x05 0x00
+#define MX91_PAD_UART2_TXD__SAI3_TX_SYNC                                         0x018c 0x033c 0x04e0 0x07 0x02
+
+#define MX91_PAD_PDM_CLK__PDM_CLK                                                0x0190 0x0340 0x0000 0x00 0x00
+#define MX91_PAD_PDM_CLK__MQS1_LEFT                                              0x0190 0x0340 0x0000 0x01 0x00
+#define MX91_PAD_PDM_CLK__LPTMR1_ALT1                                            0x0190 0x0340 0x0000 0x04 0x00
+#define MX91_PAD_PDM_CLK__GPIO1_IO8                                              0x0190 0x0340 0x0000 0x05 0x00
+#define MX91_PAD_PDM_CLK__CAN1_TX                                                0x0190 0x0340 0x0000 0x06 0x00
+
+#define MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0                                0x0194 0x0344 0x04c4 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM0__MQS1_RIGHT                                     0x0194 0x0344 0x0000 0x01 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1                                    0x0194 0x0344 0x0424 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK                                    0x0194 0x0344 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2                                    0x0194 0x0344 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9                                      0x0194 0x0344 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__CAN1_RX                                        0x0194 0x0344 0x0360 0x06 0x01
+
+#define MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1                                0x0198 0x0348 0x04c8 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1                                    0x0198 0x0348 0x0438 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK                                    0x0198 0x0348 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3                                    0x0198 0x0348 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10                                     0x0198 0x0348 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1                          0x0198 0x0348 0x0368 0x06 0x01
+
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC                                         0x019c 0x034c 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_DATA1                                        0x019c 0x034c 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXFS__LPSPI1_PCS0                                          0x019c 0x034c 0x0420 0x02 0x01
+#define MX91_PAD_SAI1_TXFS__LPUART2_DTR_B                                        0x019c 0x034c 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXFS__MQS1_LEFT                                            0x019c 0x034c 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXFS__GPIO1_IO11                                           0x019c 0x034c 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXC__SAI1_TX_BCLK                                          0x01a0 0x0350 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXC__LPUART2_CTS_B                                         0x01a0 0x0350 0x0460 0x01 0x01
+#define MX91_PAD_SAI1_TXC__LPSPI1_SIN                                            0x01a0 0x0350 0x042c 0x02 0x01
+#define MX91_PAD_SAI1_TXC__LPUART1_DSR_B                                         0x01a0 0x0350 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXC__CAN1_RX                                               0x01a0 0x0350 0x0360 0x04 0x02
+#define MX91_PAD_SAI1_TXC__GPIO1_IO12                                            0x01a0 0x0350 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0                                        0x01a4 0x0354 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXD0__LPUART2_RTS_B                                        0x01a4 0x0354 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXD0__LPSPI1_SCK                                           0x01a4 0x0354 0x0428 0x02 0x01
+#define MX91_PAD_SAI1_TXD0__LPUART1_DTR_B                                        0x01a4 0x0354 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXD0__CAN1_TX                                              0x01a4 0x0354 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXD0__GPIO1_IO13                                           0x01a4 0x0354 0x0000 0x05 0x00
+#define MX91_PAD_SAI1_TXD0__SAI1_MCLK                                            0x01a4 0x0354 0x04d4 0x06 0x01
+
+#define MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0                                        0x01a8 0x0358 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_RXD0__SAI1_MCLK                                            0x01a8 0x0358 0x04d4 0x01 0x02
+#define MX91_PAD_SAI1_RXD0__LPSPI1_SOUT                                          0x01a8 0x0358 0x0430 0x02 0x01
+#define MX91_PAD_SAI1_RXD0__LPUART2_DSR_B                                        0x01a8 0x0358 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_RXD0__MQS1_RIGHT                                           0x01a8 0x0358 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_RXD0__GPIO1_IO14                                           0x01a8 0x0358 0x0000 0x05 0x00
+
+#define MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY                                        0x01ac 0x035c 0x0000 0x00 0x00
+#define MX91_PAD_WDOG_ANY__GPIO1_IO15                                            0x01ac 0x035c 0x0000 0x05 0x00
+#endif /* __DTS_IMX91_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts
new file mode 100644
index 000000000000..5c430e6fca65
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts
@@ -0,0 +1,739 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx91-tqma9131.dtsi"
+
+/{
+	model = "TQ-Systems i.MX91 TQMa91xxLA/TQMa91xxCA on MBa91xxCA starter kit";
+	compatible = "tq,imx91-tqma9131-mba91xxca", "tq,imx91-tqma9131", "fsl,imx91";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm2 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+			};
+		};
+	};
+
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		fan-supply = <&reg_12v0>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		powerdown-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+				};
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "USB_C_ALERT#", "BM2_LCD_INT#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_jtag>;
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "TEMP_EVENT_MOD#", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		temp-event-mod-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "TEMP_EVENT_MOD#";
+		};
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "LVDS_SHDN#",
+				  "FAN_PWR_EN", "",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	interrupt-parent = <&expander0>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_MDC__ENET1_MDC				0x51e>,
+			   /* SION | HYS | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO				0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000>,
+			   <MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000>,
+			   <MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000>,
+			   <MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000>,
+			   <MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC			0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e>,
+			   <MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1				0x51e>,
+			   <MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e>,
+			   <MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e>,
+			   <MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_CCM_CLKO1__GPIO3_IO26		0x1000>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_MDC__ENET2_MDC		0x51e>,
+			   /* SION | HYS | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_MDIO__ENET2_MDIO		0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0		0x1000>,
+			   <MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1		0x1000>,
+			   <MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2		0x1000>,
+			   <MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3		0x1000>,
+			   <MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL	0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC		0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0		0x51e>,
+			   <MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1		0x51e>,
+			   <MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2		0x51e>,
+			   <MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3		0x51e>,
+			   <MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL	0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC		0x58e>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_CCM_CLKO2__GPIO3_IO27		0x1000>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = /* HYS | PU | FSEL_0 | DSE no drive */
+			   <MX91_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200>,
+			   /* PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_PDM_CLK__CAN1_TX			0x039e>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK	0x051e>,
+			   <MX91_PAD_DAP_TDI__JTAG_MUX_TDI		0x1200>,
+			   <MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO	0x031e>,
+			   <MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS	0x1200>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = /* SION | HYS | OD | FSEL_3 | DSE X4 */
+			   <MX91_PAD_GPIO_IO28__LPI2C3_SDA		0x4000199e>,
+			   <MX91_PAD_GPIO_IO29__LPI2C3_SCL		0x4000199e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX91_PAD_SAI1_RXD0__GPIO1_IO14		0x1000>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SAI1_TXC__GPIO1_IO12		0x1000>;
+	};
+
+	pinctrl_rgbdisp: rgbdispgrp {
+		fsl,pins = <MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK	0x31e>,
+			   <MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE	0x31e>,
+			   <MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC	0x31e>,
+			   <MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC	0x31e>,
+			   <MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0	0x31e>,
+			   <MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1	0x31e>,
+			   <MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2	0x31e>,
+			   <MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3	0x31e>,
+			   <MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4	0x31e>,
+			   <MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5	0x31e>,
+			   <MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6	0x31e>,
+			   <MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7	0x31e>,
+			   <MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8	0x31e>,
+			   <MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9	0x31e>,
+			   <MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10	0x31e>,
+			   <MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11	0x31e>,
+			   <MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12	0x31e>,
+			   <MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13	0x31e>,
+			   <MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14	0x31e>,
+			   <MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15	0x31e>,
+			   <MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16	0x31e>,
+			   <MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17	0x31e>,
+			   <MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18	0x31e>,
+			   <MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19	0x31e>,
+			   <MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20	0x31e>,
+			   <MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21	0x31e>,
+			   <MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22	0x31e>,
+			   <MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23	0x31e>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SAI1_TXFS__GPIO1_IO11		0x1000>;
+	};
+
+	pinctrl_tpm2: tpm2grp {
+		fsl,pins = <MX91_PAD_I2C2_SCL__TPM2_CH2			0x57e>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x1000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_UART1_RXD__LPUART1_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_UART1_TXD__LPUART1_TX		0x011e>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_UART2_RXD__LPUART2_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_UART2_TXD__LPUART2_TX		0x011e>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SD2_CD_B__GPIO3_IO0		0x1000>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X5 */
+			   <MX91_PAD_SD2_CLK__USDHC2_CLK		0x05be>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   /* HYS | PU | FSEL_3 | DSE X3 */
+			   <MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e>,
+			   <MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e>,
+			   <MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e>,
+			   <MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X6 */
+			   <MX91_PAD_SD2_CLK__USDHC2_CLK		0x05fe>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   <MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e>,
+			   <MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e>,
+			   <MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e>,
+			   <MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi b/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi
new file mode 100644
index 000000000000..5792952b7a8e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+
+#include "imx91.dtsi"
+
+/{
+	model = "TQ-Systems i.MX91 TQMa91xxCA / TQMa91xxLA SOM";
+	compatible = "tq,imx91-tqma9131", "fsl,imx91";
+
+	memory@80000000 {
+		device_type = "memory";
+		/* our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* default CMA, must not exceed assembled memory */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		/* EdgeLock secure enclave  */
+		ele_reserved: ele-reserved@a4120000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4120000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	/* SD2 RST# via PMIC SW_EN */
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&buck4>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&buck5>;
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/*
+		 * no DQS, RXCLKSRC internal loop back, max 66 MHz
+		 * clk framework uses CLK_DIVIDER_ROUND_CLOSEST
+		 * selected value together with root from
+		 * IMX91_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to
+		 * respect the maximum value.
+		 */
+		spi-max-frequency = <62000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	se97_som: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9451a: pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9451>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V8_SOC - hw developer guide: 0.75 .. 0.9 */
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_DDRQ - 1.1 V for LPDDR4 */
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_3V3 - EEPROM, RTC, ... */
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 - SPI NOR, eMMC, RAM VDD1... */
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 - RAM VDD2*/
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_BBSM, fix 1.8 */
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_ANA */
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_SD2 - 3.3/1.8V USDHC2 io Voltage */
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom0: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&buck4>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&buck4>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @57) */
+	eeprom@5f {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x5f>;
+		vcc-supply = <&buck4>;
+	};
+
+	accelerometer@6a {
+		compatible = "st,ism330dhcx";
+		reg = <0x6a>;
+		vdd-supply = <&buck4>;
+		vddio-supply = <&buck4>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = /* FSEL 3  | DSE X6 */
+			   <MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B		0x01fe>,
+			   <MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK		0x01fe>,
+			   /* HYS | PU | FSEL 3  | DSE X6 */
+			   <MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0	0x13fe>,
+			   <MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1	0x13fe>,
+			   /* HYS | FSEL 3  | DSE X6 (external PU) */
+			   <MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2	0x11fe>,
+			   <MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3	0x11fe>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = /* SION | OD | FSEL 3 | DSE X4 */
+			   <MX91_PAD_I2C1_SCL__LPI2C1_SCL		0x4000199e>,
+			   <MX91_PAD_I2C1_SDA__LPI2C1_SDA		0x4000199e>;
+	};
+
+	pinctrl_pca9451: pca9451grp {
+		fsl,pins = /* HYS | PU */
+			   <MX91_PAD_I2C2_SDA__GPIO1_IO3		0x1200>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = /* FSEL 2 | DSE X2 */
+			   <MX91_PAD_SD2_RESET_B__GPIO3_IO7		0x106>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = /* PD | FSEL 3 | DSE X5 */
+			   <MX91_PAD_SD1_CLK__USDHC1_CLK		0x5be>,
+			   /* HYS | FSEL 0 | no drive */
+			   <MX91_PAD_SD1_STROBE__USDHC1_STROBE		0x1000>,
+			   /* HYS | FSEL 3 | X5 */
+			   <MX91_PAD_SD1_CMD__USDHC1_CMD		0x400011be>,
+			   /* HYS | FSEL 3 | X4 */
+			   <MX91_PAD_SD1_DATA0__USDHC1_DATA0		0x4000119e>,
+			   <MX91_PAD_SD1_DATA1__USDHC1_DATA1		0x4000119e>,
+			   <MX91_PAD_SD1_DATA2__USDHC1_DATA2		0x4000119e>,
+			   <MX91_PAD_SD1_DATA3__USDHC1_DATA3		0x4000119e>,
+			   <MX91_PAD_SD1_DATA4__USDHC1_DATA4		0x4000119e>,
+			   <MX91_PAD_SD1_DATA5__USDHC1_DATA5		0x4000119e>,
+			   <MX91_PAD_SD1_DATA6__USDHC1_DATA6		0x4000119e>,
+			   <MX91_PAD_SD1_DATA7__USDHC1_DATA7		0x4000119e>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = /* PU | FSEL 1 | DSE X4 */
+			   <MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY		0x31e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi b/arch/arm64/boot/dts/freescale/imx91.dtsi
new file mode 100644
index 000000000000..4d8300b2a7bc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+#include "imx91-pinfunc.h"
+#include "imx91_93_common.dtsi"
+
+&clk {
+	compatible = "fsl,imx91-ccm";
+};
+
+&ddr_pmu {
+	compatible = "fsl,imx91-ddr-pmu", "fsl,imx93-ddr-pmu";
+};
+
+&eqos {
+	clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+		 <&clk IMX91_CLK_ENET_TIMER>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
+	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+			  <&clk IMX91_CLK_ENET1_QOS_TSN>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+	assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&fec {
+	clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+		 <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+		 <&clk IMX91_CLK_ENET_TIMER>,
+		 <&clk IMX91_CLK_ENET2_REGULAR>,
+		 <&clk IMX93_CLK_DUMMY>;
+	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+			  <&clk IMX91_CLK_ENET2_REGULAR>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+	assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&i3c1 {
+	clocks = <&clk IMX93_CLK_BUS_AON>,
+		 <&clk IMX93_CLK_I3C1_GATE>,
+		 <&clk IMX93_CLK_DUMMY>;
+};
+
+&i3c2 {
+	clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+		 <&clk IMX93_CLK_I3C2_GATE>,
+		 <&clk IMX93_CLK_DUMMY>;
+};
+
+&iomuxc {
+	compatible = "fsl,imx91-iomuxc";
+};
+
+&media_blk_ctrl {
+	compatible = "fsl,imx91-media-blk-ctrl", "syscon";
+	clocks = <&clk IMX93_CLK_MEDIA_APB>,
+		 <&clk IMX93_CLK_MEDIA_AXI>,
+		 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+		 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+		 <&clk IMX93_CLK_CAM_PIX>,
+		 <&clk IMX93_CLK_LCDIF_GATE>,
+		 <&clk IMX93_CLK_ISI_GATE>,
+		 <&clk IMX93_CLK_MIPI_CSI_GATE>;
+	clock-names = "apb", "axi", "nic", "disp", "cam",
+		      "lcdif", "isi", "csi";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
new file mode 100644
index 000000000000..7958cef35376
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
@@ -0,0 +1,1187 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022,2025 NXP
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/fsl,imx93-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx93-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <10000>;
+				exit-latency-us = <7000>;
+				min-residency-us = <27000>;
+				wakeup-latency-us = <15000>;
+			};
+		};
+
+		A55_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48040000 0 0xc0000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	mqs1: mqs1 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&aonmix_ns_gpr>;
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&wakeupmix_gpr>;
+		status = "disabled";
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x80000000>,
+			 <0x28000000 0x0 0x28000000 0x10000000>;
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx93-edma3";
+				reg = <0x44000000 0x200000>;
+				#dma-cells = <3>;
+				dma-channels = <31>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,  //  0: Reserved
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  //  1: CANFD1
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,  //  2: Reserved
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,  //  3: GPIO1 CH0
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,  //  4: GPIO1 CH1
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, //  5: I3C1 TO Bus
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, //  6: I3C1 From Bus
+					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, //  7: LPI2C1 M TX
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, //  8: LPI2C1 S TX
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, //  9: LPI2C2 M RX
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
+					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
+					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
+					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
+					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
+					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
+					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
+					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1
+					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;  // err
+				clocks = <&clk IMX93_CLK_EDMA1_GATE>;
+				clock-names = "dma";
+			};
+
+			aonmix_ns_gpr: syscon@44210000 {
+				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
+				reg = <0x44210000 0x1000>;
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			wdog1: watchdog@442d0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442d0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG1_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@442e0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442e0000 0x10000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG2_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM1_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM2_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c1: i3c@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_I3C1_GATE>,
+					 <&clk IMX93_CLK_I3C1_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 7 0 0>, <&edma1 8 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 9 0 0>, <&edma1 10 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 11 0 0>, <&edma1 12 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 13 0 0>, <&edma1 14 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_CAN1_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
+				status = "disabled";
+			};
+
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@443c0000 {
+				compatible = "fsl,imx93-iomuxc";
+				reg = <0x443c0000 0x10000>;
+				status = "okay";
+			};
+
+			bbnsm: bbnsm@44440000 {
+				compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+				reg = <0x44440000 0x10000>;
+
+				bbnsm_rtc: rtc {
+					compatible = "nxp,imx93-bbnsm-rtc";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				bbnsm_pwrkey: pwrkey {
+					compatible = "nxp,imx93-bbnsm-pwrkey";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+					linux,code = <KEY_POWER>;
+				};
+			};
+
+			clk: clock-controller@44450000 {
+				compatible = "fsl,imx93-ccm";
+				reg = <0x44450000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+				assigned-clock-rates = <393216000>;
+				status = "okay";
+			};
+
+			src: system-controller@44460000 {
+				compatible = "fsl,imx93-src", "syscon";
+				reg = <0x44460000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				mediamix: power-domain@44462400 {
+					compatible = "fsl,imx93-src-slice";
+					reg = <0x44462400 0x400>, <0x44465800 0x400>;
+					#power-domain-cells = <0>;
+					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+						 <&clk IMX93_CLK_MEDIA_APB>;
+				};
+			};
+
+			clock-controller@44480000 {
+				compatible = "fsl,imx93-anatop";
+				reg = <0x44480000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_PDM_IPG>,
+					 <&clk IMX93_CLK_PDM_GATE>,
+					 <&clk IMX93_CLK_AUDIO_PLL>;
+				clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
+				dmas = <&edma1 29 0 5>;
+				dma-names = "rx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ADC1_GATE>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx93-edma4";
+				reg = <0x42000000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_EDMA2_GATE>;
+				clock-names = "dma";
+			};
+
+			wakeupmix_gpr: syscon@42420000 {
+				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
+				reg = <0x42420000 0x1000>;
+			};
+
+			wdog3: watchdog@42490000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x42490000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog4: watchdog@424a0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424a0000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG4_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog5: watchdog@424b0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424b0000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG5_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm3: pwm@424e0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424e0000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM3_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM4_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM5_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM6_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c2: i3c@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_I3C2_GATE>,
+					 <&clk IMX93_CLK_I3C2_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_CAN2_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
+				status = "disabled";
+			};
+
+			flexspi1: spi@425e0000 {
+				compatible = "nxp,imx93-fspi", "nxp,imx8mm-fspi";
+				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
+					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				status = "disabled";
+			};
+
+			sai2: sai@42650000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx93-xcvr";
+				reg = <0x42680000 0x800>,
+				      <0x42680800 0x400>,
+				      <0x42680c00 0x080>,
+				      <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SPDIF_IPG>,
+					 <&clk IMX93_CLK_SPDIF_GATE>,
+					 <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC1_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC2_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			fec: ethernet@42890000 {
+				compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x42890000 0x10000>;
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER1>,
+					 <&clk IMX93_CLK_ENET_REF>,
+					 <&clk IMX93_CLK_ENET_REF_PHY>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+						  <&clk IMX93_CLK_ENET_REF>,
+						  <&clk IMX93_CLK_ENET_REF_PHY>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>, <50000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+				nvmem-cells = <&eth_mac1>;
+				nvmem-cell-names = "mac-address";
+				status = "disabled";
+			};
+
+			eqos: ethernet@428a0000 {
+				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
+				reg = <0x428a0000 0x10000>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
+				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER2>,
+					 <&clk IMX93_CLK_ENET>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>;
+				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
+						  <&clk IMX93_CLK_ENET>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>;
+				intf_mode = <&wakeupmix_gpr 0x28>;
+				snps,clk-csr = <6>;
+				nvmem-cells = <&eth_mac2>;
+				nvmem-cell-names = "mac-address";
+				status = "disabled";
+			};
+
+			usdhc3: mmc@428b0000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x428b0000 0x10000>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC3_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC3>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43810000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
+				 <&clk IMX93_CLK_GPIO2_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 4 30>;
+			ngpios = <30>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43820000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
+				 <&clk IMX93_CLK_GPIO3_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
+			ngpios = <32>;
+		};
+
+		gpio4: gpio@43830000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43830000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
+				 <&clk IMX93_CLK_GPIO4_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
+			ngpios = <30>;
+		};
+
+		gpio1: gpio@47400000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x47400000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
+				 <&clk IMX93_CLK_GPIO1_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 92 16>;
+			ngpios = <16>;
+		};
+
+		ocotp: efuse@47510000 {
+			compatible = "fsl,imx93-ocotp", "syscon";
+			reg = <0x47510000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth_mac1: mac-address@4ec {
+				reg = <0x4ec 0x6>;
+			};
+
+			eth_mac2: mac-address@4f2 {
+				reg = <0x4f2 0x6>;
+			};
+
+		};
+
+		s4muap: mailbox@47520000 {
+			compatible = "fsl,imx93-mu-s4";
+			reg = <0x47520000 0x10000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			#mbox-cells = <2>;
+		};
+
+		media_blk_ctrl: system-controller@4ac10000 {
+			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+			reg = <0x4ac10000 0x10000>;
+			power-domains = <&mediamix>;
+			clocks = <&clk IMX93_CLK_MEDIA_APB>,
+				 <&clk IMX93_CLK_MEDIA_AXI>,
+				 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+				 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+				 <&clk IMX93_CLK_CAM_PIX>,
+				 <&clk IMX93_CLK_PXP_GATE>,
+				 <&clk IMX93_CLK_LCDIF_GATE>,
+				 <&clk IMX93_CLK_ISI_GATE>,
+				 <&clk IMX93_CLK_MIPI_CSI_GATE>,
+				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
+			clock-names = "apb", "axi", "nic", "disp", "cam",
+				      "pxp", "lcdif", "isi", "csi", "dsi";
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		usbotg1: usb@4c100000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c100000 0x200>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			phys = <&usbphynop1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@4c100200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x4c100200 0x200>;
+			#index-cells = <1>;
+		};
+
+		usbotg2: usb@4c200000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c200000 0x200>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			phys = <&usbphynop2>;
+			fsl,usbmisc = <&usbmisc2 0>;
+			status = "disabled";
+		};
+
+		usbmisc2: usbmisc@4c200200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x4c200200 0x200>;
+			#index-cells = <1>;
+		};
+
+		memory-controller@4e300000 {
+			compatible = "nxp,imx9-memory-controller";
+			reg = <0x4e300000 0x800>, <0x4e301000 0x1000>;
+			reg-names = "ctrl", "inject";
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+		};
+
+		ddr_pmu: ddr-pmu@4e300dc0 {
+			compatible = "fsl,imx93-ddr-pmu";
+			reg = <0x4e300dc0 0x200>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 0e12dcd0d4d1..b94a24193e19 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -12,6 +12,25 @@
 	model = "NXP i.MX93 11X11 EVK board";
 	compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
 
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
@@ -95,6 +114,15 @@
 		gpio = <&adp5585 6 GPIO_ACTIVE_LOW>;
 	};
 
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -107,6 +135,28 @@
 		enable-active-high;
 	};
 
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+	};
+
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		pwms = <&adp5585 0 100000 0>;
@@ -217,10 +267,10 @@
 
 		ethphy1: ethernet-phy@1 {
 			reg = <1>;
-			eee-broken-1000t;
 			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
 		};
 	};
 };
@@ -241,10 +291,10 @@
 
 		ethphy2: ethernet-phy@2 {
 			reg = <2>;
-			eee-broken-1000t;
 			reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
 		};
 	};
 };
@@ -493,6 +543,10 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
 };
 
 &micfil {
@@ -594,7 +648,25 @@
 	no-mmc;
 };
 
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
 &wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
 
@@ -619,13 +691,13 @@
 			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
 			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
 			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
-			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x58e
 			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
 			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
 			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
 			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
 			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
-			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
 			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
 		>;
 	};
@@ -657,24 +729,17 @@
 			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
 			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
 			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
-			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x58e
 			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
 			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
 			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
 			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
 			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
-			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
 			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
 		>;
 	};
 
-	pinctrl_lpi2c3: lpi2c3grp {
-		fsl,pins = <
-			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
-			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
-		>;
-	};
-
 	pinctrl_fec_sleep: fecsleepgrp {
 		fsl,pins = <
 			MX93_PAD_ENET2_MDC__GPIO4_IO14			0x51e
@@ -932,4 +997,62 @@
 		>;
 	};
 
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x1582
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x40001382
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x40001382
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x40001382
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x40001382
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x40001382
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x158e
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x4000138e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x15fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x400013fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x400013fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x400013fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x400013fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x400013fe
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__GPIO3_IO20		0x31e
+			MX93_PAD_SD3_CMD__GPIO3_IO21		0x31e
+			MX93_PAD_SD3_DATA0__GPIO3_IO22		0x31e
+			MX93_PAD_SD3_DATA1__GPIO3_IO23		0x31e
+			MX93_PAD_SD3_DATA2__GPIO3_IO24		0x31e
+			MX93_PAD_SD3_DATA3__GPIO3_IO25		0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_wlan: usdhc3wlangrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
index 236a44c1782a..f9eebd27d640 100644
--- a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
@@ -12,6 +12,21 @@
 	model = "NXP i.MX93 14X14 EVK board";
 	compatible = "fsl,imx93-14x14-evk", "fsl,imx93";
 
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+	};
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
@@ -99,6 +114,15 @@
 		enable-active-high;
 	};
 
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -111,6 +135,23 @@
 		off-on-delay-us = <12000>;
 	};
 
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
 	reg_vdd_12v: regulator-vdd-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "reg_vdd_12v";
@@ -126,6 +167,11 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &adc1 {
@@ -219,6 +265,89 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
 	};
+
+	pmic@25 {
+		compatible = "nxp,pca9452";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <670000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1060000>;
+				regulator-max-microvolt = <1140000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <840000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &lpi2c3 {
@@ -283,7 +412,25 @@
 	status = "okay";
 };
 
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
 &wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
 
@@ -465,4 +612,63 @@
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x1582
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x40001382
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x40001382
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x40001382
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x40001382
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x40001382
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x158e
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x4000138e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x15fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x400013fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x400013fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x400013fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x400013fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x400013fe
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__GPIO3_IO20		0x31e
+			MX93_PAD_SD3_CMD__GPIO3_IO21		0x31e
+			MX93_PAD_SD3_DATA0__GPIO3_IO22		0x31e
+			MX93_PAD_SD3_DATA1__GPIO3_IO23		0x31e
+			MX93_PAD_SD3_DATA2__GPIO3_IO24		0x31e
+			MX93_PAD_SD3_DATA3__GPIO3_IO25		0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_wlan: usdhc3wlangrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26	  0x31e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
index 20ec5b3c21f4..0852067eab2c 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -17,6 +17,24 @@
 		compatible = "linux,bt-sco";
 	};
 
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
@@ -82,6 +100,15 @@
 		enable-active-high;
 	};
 
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_rpi_3v3: regulator-rpi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_RPI_3V3";
@@ -103,6 +130,23 @@
 		off-on-delay-us = <12000>;
 	};
 
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
 	sound-bt-sco {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "bt-sco-audio";
@@ -151,6 +195,11 @@
 			"IN3R", "AMIC",
 			"IN1R", "AMIC";
 	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &adc1 {
@@ -184,7 +233,6 @@
 		ethphy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
-			eee-broken-1000t;
 			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <80000>;
@@ -221,6 +269,11 @@
 		>;
 	};
 
+	p3t1085: temperature-sensor@48 {
+		compatible = "nxp,p3t1085";
+		reg = <0x48>;
+	};
+
 	ptn5110: tcpc@50 {
 		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x50>;
@@ -260,6 +313,11 @@
 		interrupt-parent = <&pcal6524>;
 		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 	};
+
+	inertial-meter@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
 };
 
 &lpi2c2 {
@@ -375,6 +433,17 @@
 	status = "okay";
 };
 
+&lpuart5 {
+	/* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
 &micfil {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pdm>;
@@ -453,7 +522,24 @@
 	status = "okay";
 };
 
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
 &wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
 
@@ -641,4 +727,46 @@
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x1582
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x40001382
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x40001382
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x40001382
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x40001382
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x40001382
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x158e
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x4000138e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x15fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x400013fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x400013fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x400013fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x400013fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x400013fe
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
index 89e97c604bd3..4620c070f4d7 100644
--- a/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
@@ -14,6 +14,27 @@
 	aliases {
 		ethernet0 = &fec;
 		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
+		spi6 = &lpspi7;
+		spi7 = &lpspi8;
 	};
 
 	leds {
@@ -33,7 +54,9 @@
 
 	reg_vcc_panel: regulator-vcc-panel {
 		compatible = "regulator-fixed";
-		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vcc_panel>;
+		gpio = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
@@ -135,6 +158,16 @@
 };
 
 &usbotg1 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+&usbotg2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	disable-over-current;
@@ -147,17 +180,15 @@
 	};
 };
 
-&usbotg2 {
-	adp-disable;
-	hnp-disable;
-	srp-disable;
-	disable-over-current;
-	dr_mode = "otg";
-	usb-role-switch;
-	status = "okay";
-};
-
 &usdhc2 {
 	vmmc-supply = <&reg_vdd_3v3>;
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_reg_vcc_panel: regvccpanelgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO21__GPIO2_IO21		0x31e /* PWM_2 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
index 47c1363a2f99..c79b1df339db 100644
--- a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
@@ -189,6 +189,7 @@
 				regulator-name = "NVCC_SD (LDO5)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
+				nxp,sd-vsel-fixed-low;
 			};
 		};
 	};
@@ -204,6 +205,9 @@
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -282,6 +286,7 @@
 	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	vmmc-supply = <&reg_usdhc2_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
 	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 };
 
@@ -466,6 +471,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_VSELECT__GPIO3_IO19		0x31e
+		>;
+	};
+
 	pinctrl_sai3: sai3grp {
 		fsl,pins = <
 			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00		0x31e /* I2S_A_DATA_IN */
@@ -553,7 +564,6 @@
 			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x40001382 /* SDIO_A_D1 */
 			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x40001382 /* SDIO_A_D2 */
 			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x40001382 /* SDIO_A_D3 */
-			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x1d0
 		>;
 	};
 
@@ -565,7 +575,6 @@
 			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e /* SDIO_A_D1 */
 			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e /* SDIO_A_D2 */
 			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e /* SDIO_A_D3 */
-			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x1d0
 		>;
 	};
 
@@ -577,7 +586,6 @@
 			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x400013fe /* SDIO_A_D1 */
 			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x400013fe /* SDIO_A_D2 */
 			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x400013fe /* SDIO_A_D3 */
-			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x1d0
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-jtag.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-jtag.dtso
new file mode 100644
index 000000000000..89f93dca3208
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-jtag.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+#include "imx93-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * NOTE: Bind pinctrl_jtag to gpio2 so that the pinctrl settings are applied.
+ * JTAG itself has no dedicated driver, so without attaching it to an active
+ * device node (like gpio2), the pinmux configuration would not take effect.
+ */
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_jtag>;
+};
+
+&iomuxc {
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO24__JTAG_MUX_TDO	0x31e
+			MX93_PAD_GPIO_IO25__JTAG_MUX_TCK	0x31e
+			MX93_PAD_GPIO_IO26__JTAG_MUX_TDI	0x31e
+			MX93_PAD_GPIO_IO27__JTAG_MUX_TMS	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso
new file mode 100644
index 000000000000..7381b87444e8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+/*
+ * NOTE: When uSDHC3 port is multiplexed on GPIO_IO[27:22] pads, it only
+ * supports 50 MHz mode, due to introduction of potential variations in
+ * trace impedance, drive strength, and timing skew. Refer to i.MX 93
+ * Application Processors Data Sheet, Rev. 3, page 60 for more details.
+ */
+&usdhc3 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>;
+	pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x179e
+			MX93_PAD_SD3_CMD__USDHC3_CMD 		0x4000178e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3sleepgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x31e
+			MX93_PAD_SD3_CMD__USDHC3_CMD 		0x31e
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x31e
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x31e
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x31e
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x31e
+		>;
+	};
+
+	pinctrl_wlbt: wlbtgrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x31e	/* WAKE_DEV */
+			MX93_PAD_CCM_CLKO3__GPIO4_IO28		0x31e	/* WAKE_HOST */
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29		0x31e	/* PDn */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-pwm-fan.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-pwm-fan.dtso
new file mode 100644
index 000000000000..d1adf04d56d9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-pwm-fan.dtso
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx93-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan>;
+		cooling-levels = <1 90 150 200 255>;
+		pwms = <&tpm6 1 40000 PWM_POLARITY_INVERTED>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_low: cpu-low {
+					hysteresis = <3000>;
+					temperature = <50000>;
+					type = "active";
+				};
+
+				cpu_med: cpu-med {
+					hysteresis = <3000>;
+					temperature = <58000>;
+					type = "active";
+				};
+
+				cpu_high: cpu-high {
+					hysteresis = <3000>;
+					temperature = <65000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					cooling-device = <&fan0 1 1>;
+					trip = <&cpu_low>;
+				};
+
+				map2 {
+					cooling-device = <&fan0 2 2>;
+					trip = <&cpu_med>;
+				};
+
+				map3 {
+					cooling-device = <&fan0 4 4>;
+					trip = <&cpu_high>;
+				};
+			};
+		};
+	};
+};
+
+&tpm6 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fan: fangrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__TPM6_CH1	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
new file mode 100644
index 000000000000..9e875e082ee8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ *
+ * Product homepage:
+ * https://www.phytec.eu/en/produkte/development-kits/phyboard-nash/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx93-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Nash-i.MX93";
+	compatible = "phytec,imx93-phyboard-nash", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	aliases {
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	curr_sens: current-sense {
+		compatible = "current-sense-amplifier";
+		#io-channel-cells = <0>;
+		io-channels = <&adc1 1>;
+		sense-gain-div = <2>;
+		sense-gain-mult = <50>;
+		sense-resistor-micro-ohms = <35000>;
+	};
+
+	flexcan1_tc: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_tc>;
+		standby-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&curr_sens 0>;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB1_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB2_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VCC_SD";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+	};
+
+	reg_vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+	};
+};
+
+/* ADC */
+&adc1 {
+	status = "okay";
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* CAN */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_tc>;
+	status = "okay";
+};
+
+/* I2C2 */
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	/* RTC */
+	i2c_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		trickle-resistor-ohms = <3000>;
+		wakeup-source;
+	};
+
+	/* EEPROM */
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc_1v8>;
+	};
+};
+
+/* SPI6 */
+&lpspi6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* TPM */
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* RS-232/RS-485 */
+&lpuart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+/* USB */
+&usbphynop1 {
+	vbus-supply = <&reg_usb1_vbus>;
+};
+
+&usbphynop2 {
+	vbus-supply = <&reg_usb2_vbus>;
+};
+
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0	0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1	0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2	0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3	0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0	0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1	0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2	0x50e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3	0x50e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x50e
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1002
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x1382
+		>;
+	};
+
+	pinctrl_flexcan1_tc: flexcan1tcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_TD3__GPIO4_IO16		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO00__GPIO2_IO00		0x386
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN		0x3fe
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT		0x386
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK		0x386
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD2__GPIO4_IO26		0x31e
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO17__GPIO2_IO17		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO08__LPUART7_TX		0x30e
+			MX93_PAD_GPIO_IO09__LPUART7_RX		0x31e
+			MX93_PAD_GPIO_IO10__LPUART7_CTS_B	0x31e
+			MX93_PAD_GPIO_IO11__LPUART7_RTS_B	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_default: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000178e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001386
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001386
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001386
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013be
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso
new file mode 100644
index 000000000000..a20898734741
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Andrej Picej <andrej.picej@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-s2 {
+			label = "sleep";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+
+		user-led2 {
+			gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x31e
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD3__GPIO4_IO13		0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso
new file mode 100644
index 000000000000..a7285f009566
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Andrej Picej <andrej.picej@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <60>;
+		reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>;
+	pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x179e
+			MX93_PAD_GPIO_IO23__USDHC3_CMD		0x4000139e
+			MX93_PAD_GPIO_IO24__USDHC3_DATA0	0x4000139e
+			MX93_PAD_GPIO_IO25__USDHC3_DATA1	0x4000139e
+			MX93_PAD_GPIO_IO26__USDHC3_DATA2	0x4000139e
+			MX93_PAD_GPIO_IO27__USDHC3_DATA3	0x4000139e
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3sleepgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__USDHC3_CLK		0x31e
+			MX93_PAD_GPIO_IO23__USDHC3_CMD		0x31e
+			MX93_PAD_GPIO_IO24__USDHC3_DATA0	0x31e
+			MX93_PAD_GPIO_IO25__USDHC3_DATA1	0x31e
+			MX93_PAD_GPIO_IO26__USDHC3_DATA2	0x31e
+			MX93_PAD_GPIO_IO27__USDHC3_DATA3	0x31e
+		>;
+	};
+
+	pinctrl_wlbt: wlbtgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD3__GPIO4_IO13		0x31e	/* BT ENABLE */
+			MX93_PAD_ENET1_TXC__GPIO4_IO07		0x31e	/* WLAN ENABLE */
+			MX93_PAD_I2C1_SCL__GPIO1_IO00		0x31e	/* HOST WAKEUP */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
index 85fb188b057f..ac64abacc4a2 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -17,10 +17,64 @@
 	compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som",
 		     "fsl,imx93";
 
+	aliases {
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+	};
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
 
+	flexcan1_tc: can-phy0 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_tc>;
+		enable-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sound_1v8: regulator-sound-1v8 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VCC1V8_AUDIO";
+	};
+
+	reg_sound_3v3: regulator-sound-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC3V3_ANALOG";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_OTG1_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_OTG2_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -31,6 +85,93 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "VCC_SD";
 	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&audio_codec>;
+			clocks = <&clk IMX93_CLK_SAI1>;
+		};
+	};
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <100000000>, <50000000>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-id0022.1561";
+		reg = <2>;
+		clocks = <&clk IMX93_CLK_ENET_REF_PHY>;
+		clock-names = "rmii-ref";
+		micrel,led-mode = <1>;
+	};
+};
+
+/* CAN */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_tc>;
+	status = "okay";
+};
+
+/* I2C2 */
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	/* Codec */
+	audio_codec: audio-codec@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+	};
+
+	/* RTC */
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
 
 /* Console */
@@ -40,9 +181,36 @@
 	status = "okay";
 };
 
-/* eMMC */
-&usdhc1 {
-	no-1-8-v;
+/* Audio */
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <19200000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* USB  */
+&usbphynop1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+};
+
+&usbphynop2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+};
+
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
 };
 
 /* SD-Card */
@@ -53,6 +221,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	bus-width = <4>;
 	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	no-mmc;
 	no-sdio;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
@@ -60,10 +229,36 @@
 };
 
 &iomuxc {
-	pinctrl_uart1: uart1grp {
+	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
-			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
-			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+			MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK	0x4000050e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x50e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x50e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x50e
+			MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER		0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan1_tc: flexcan1tcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_TD3__GPIO4_IO16		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
 		>;
 	};
 
@@ -73,45 +268,71 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD2__GPIO4_IO26		0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_UART2_RXD__SAI1_MCLK		0x1202
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x1202
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK		0x1202
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00	0x1402
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00	0x1402
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
 	pinctrl_usdhc2_cd: usdhc2cdgrp {
 		fsl,pins = <
 			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
 		>;
 	};
 
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc2_default: usdhc2grp {
 		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK		0x179e
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp {
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK            0x179e
-			MX93_PAD_SD2_CMD__USDHC2_CMD            0x139e
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0        0x138e
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x138e
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x139e
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x139e
-			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT    0x51e
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x159e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp {
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX93_PAD_SD2_CLK__USDHC2_CLK            0x178e
-			MX93_PAD_SD2_CMD__USDHC2_CMD            0x139e
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0        0x139e
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x139e
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x139e
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x139e
-			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT    0x51e
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso b/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso
new file mode 100644
index 000000000000..23bede7833f8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4010000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+		 <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
index 88c2657b50e6..3f069905cf0b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -16,6 +16,10 @@
 	model = "PHYTEC phyCORE-i.MX93";
 	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
 
+	aliases {
+		ethernet0 = &fec;
+	};
+
 	reserved-memory {
 		ranges;
 		#address-cells = <2>;
@@ -42,6 +46,19 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	reg_vdda_1v8: regulator-vdda-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDA_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&buck5>;
+	};
+};
+
+/* ADC */
+&adc1 {
+	vref-supply = <&reg_vdda_1v8>;
 };
 
 /* Ethernet */
@@ -50,7 +67,6 @@
 	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy1>;
-	fsl,magic-packet;
 	assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
 			  <&clk IMX93_CLK_ENET_REF>,
 			  <&clk IMX93_CLK_ENET_REF_PHY>;
@@ -68,21 +84,121 @@
 		ethphy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
+			reset-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+			reset-assert-us = <30>;
+		};
+	};
+};
+
+/* I2C3 */
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDDQ_0V6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3V3_BUCK";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "VDD_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "PMIC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "VDD_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
 		};
 	};
+
+	/* EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&buck4>;
+	};
 };
 
 /* eMMC */
 &usdhc1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
 	non-removable;
+	no-1-8-v;
 	status = "okay";
 };
 
 /* Watchdog */
 &wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
 
@@ -91,36 +207,93 @@
 		fsl,pins = <
 			MX93_PAD_ENET2_MDC__ENET1_MDC			0x50e
 			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x502
-			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
-			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
-			MX93_PAD_ENET2_RXC__ENET1_RX_ER			0x5fe
+			/* the three pins below are connected to PHYs straps,
+			 * that is what the pull-up/down setting is for.
+			 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x37e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x37e
 			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
 			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x50e
 			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x50e
 			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x50e
 			MX93_PAD_ENET2_TD2__ENET1_TX_CLK		0x4000050e
+			MX93_PAD_ENET2_RXC__GPIO4_IO23			0x51e
 		>;
 	};
 
 	pinctrl_leds: ledsgrp {
 		fsl,pins = <
-			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x31e
+			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x11e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
 		>;
 	};
 
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD3__GPIO4_IO27		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX93_PAD_SD1_CLK__USDHC1_CLK		0x179e
-			MX93_PAD_SD1_CMD__USDHC1_CMD		0x1386
-			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
-			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x1386
-			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
-			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x1386
-			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x1386
-			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x1386
-			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x1386
-			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x1386
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001386
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001386
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001386
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001386
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001386
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001386
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001386
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000139e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000139e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013be
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000139e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000139e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000139e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000139e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000139e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000139e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000139e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013be
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013be
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013be
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013be
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013be
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013be
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013be
 			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
 		>;
 	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
new file mode 100644
index 000000000000..2673d9dccbf4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa91xxCA starter kit";
+	compatible = "tq,imx93-tqma9352-mba91xxca", "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm2 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+			};
+		};
+	};
+
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		fan-supply = <&reg_12v0>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		powerdown-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+				};
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_active: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&cpu_active>;
+					cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "USB_C_ALERT#", "BM2_LCD_INT#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "TEMP_EVENT_MOD#", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		temp-event-mod-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "TEMP_EVENT_MOD#";
+		};
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "LVDS_SHDN#",
+				  "FAN_PWR_EN", "",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	interrupt-parent = <&expander0>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_MDC__ENET_QOS_MDC				0x51e>,
+			   /* SION | HYS | ODE | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO				0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000>,
+			   <MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000>,
+			   <MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000>,
+			   <MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000>,
+			   <MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e>,
+			   <MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x51e>,
+			   <MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e>,
+			   <MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e>,
+			   <MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_CCM_CLKO1__GPIO3_IO26			0x1000>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e>,
+			   /* SION | HYS | ODE | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0			0x1000>,
+			   <MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1			0x1000>,
+			   <MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2			0x1000>,
+			   <MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3			0x1000>,
+			   <MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC			0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0			0x51e>,
+			   <MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1			0x51e>,
+			   <MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2			0x51e>,
+			   <MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3			0x51e>,
+			   <MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC			0x58e>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x1000>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = /* HYS | PU | FSEL_0 | DSE no drive */
+			   <MX93_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200>,
+			   /* PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_PDM_CLK__CAN1_TX			0x039e>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK	0x051e>,
+			   <MX93_PAD_DAP_TDI__JTAG_MUX_TDI		0x1200>,
+			   <MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO	0x031e>,
+			   <MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS	0x1200>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = /* SION | HYS | OD | FSEL_3 | DSE X4 */
+			   <MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x4000199e>,
+			   <MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x4000199e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX93_PAD_SAI1_RXD0__GPIO1_IO14		0x1000>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1000>;
+	};
+
+	pinctrl_rgbdisp: rgbdispgrp {
+		fsl,pins = <MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK	0x31e>,
+			   <MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE	0x31e>,
+			   <MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC	0x31e>,
+			   <MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC	0x31e>,
+			   <MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00	0x31e>,
+			   <MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01	0x31e>,
+			   <MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02	0x31e>,
+			   <MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03	0x31e>,
+			   <MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04	0x31e>,
+			   <MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05	0x31e>,
+			   <MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06	0x31e>,
+			   <MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07	0x31e>,
+			   <MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08	0x31e>,
+			   <MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09	0x31e>,
+			   <MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10	0x31e>,
+			   <MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11	0x31e>,
+			   <MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12	0x31e>,
+			   <MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13	0x31e>,
+			   <MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14	0x31e>,
+			   <MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15	0x31e>,
+			   <MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16	0x31e>,
+			   <MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17	0x31e>,
+			   <MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18	0x31e>,
+			   <MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19	0x31e>,
+			   <MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20	0x31e>,
+			   <MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21	0x31e>,
+			   <MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22	0x31e>,
+			   <MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23	0x31e>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SAI1_TXFS__GPIO1_IO11		0x1000>;
+	};
+
+	pinctrl_tpm2: tpm2grp {
+		fsl,pins = <MX93_PAD_I2C2_SCL__TPM2_CH2			0x57e>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x1000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_UART1_RXD__LPUART1_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_UART1_TXD__LPUART1_TX		0x011e>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_UART2_RXD__LPUART2_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_UART2_TXD__LPUART2_TX		0x011e>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX93_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX93_PAD_SD2_CD_B__GPIO3_IO00		0x1000>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X5 */
+			   <MX93_PAD_SD2_CLK__USDHC2_CLK		0x05be>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   /* HYS | PU | FSEL_3 | DSE X3 */
+			   <MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e>,
+			   <MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e>,
+			   <MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e>,
+			   <MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X6 */
+			   <MX93_PAD_SD2_CLK__USDHC2_CLK		0x05fe>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   <MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e>,
+			   <MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e>,
+			   <MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e>,
+			   <MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index 599df32976e2..4760d07ea24b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
- * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
  * D-82229 Seefeld, Germany.
  * Author: Markus Niebel
  * Author: Alexander Stein
@@ -26,10 +26,35 @@
 
 	aliases {
 		eeprom0 = &eeprom0;
-		ethernet0 = &fec;
-		ethernet1 = &eqos;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		rtc0 = &pcf85063;
 		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
 	};
 
 	backlight_lvds: backlight {
@@ -448,38 +473,38 @@
 				  "WLAN_PERST#", "12V_EN";
 
 		/*
-		 * Controls the WiFi card PD pin which is low active
-		 * as power down signal. The output-high states, the signal
-		 * is active, e.g. card is powered down
+		 * Controls the WiFi card's low-active power down pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
 		 */
 		wlan-pd-hog {
 			gpio-hog;
 			gpios = <4 GPIO_ACTIVE_LOW>;
-			output-high;
+			output-low;
 			line-name = "WLAN_PD#";
 		};
 
 		/*
-		 * Controls the WiFi card disable pin which is low active
-		 * as disable signal. The output-high states, the signal
-		 * is active, e.g. card is disabled
+		 * Controls the WiFi card's low-active disable pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
 		 */
 		wlan-wdisable-hog {
 			gpio-hog;
 			gpios = <5 GPIO_ACTIVE_LOW>;
-			output-high;
+			output-low;
 			line-name = "WLAN_W_DISABLE#";
 		};
 
 		/*
-		 * Controls the WiFi card reset pin which is low active
-		 * as reset signal. The output-high states, the signal
-		 * is active, e.g. card in reset
+		 * Controls the WiFi card's reset pin.
+		 * The output-low states, the signal is inactive,
+		 * resulting in high signal at power-down pin
 		 */
 		wlan-perst-hog {
 			gpio-hog;
 			gpios = <6 GPIO_ACTIVE_LOW>;
-			output-high;
+			output-low;
 			line-name = "WLAN_PERST#";
 		};
 	};
@@ -755,12 +780,6 @@
 		>;
 	};
 
-	pinctrl_pcf85063: pcf85063grp {
-		fsl,pins = <
-			MX93_PAD_SAI1_RXD0__GPIO1_IO14			0x1000
-		>;
-	};
-
 	pinctrl_mipi_csi: mipicsigrp {
 		fsl,pins = <
 			MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3		0x051e /* MCLK */
@@ -769,6 +788,12 @@
 		>;
 	};
 
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14			0x1000
+		>;
+	};
+
 	pinctrl_pexp_irq: pexpirqgrp {
 		fsl,pins = <
 			/* HYS | FSEL_0 | No DSE */
@@ -783,17 +808,17 @@
 		>;
 	};
 
-	pinctrl_temp_sensor_som: tempsensorsomgrp {
+	pinctrl_tc9595: tc9595-grp {
 		fsl,pins = <
-			/* HYS | FSEL_0 | no DSE */
-			MX93_PAD_SAI1_TXFS__GPIO1_IO11			0x1000
+			/* HYS | PD | FSEL_0 | no DSE */
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29			0x1400
 		>;
 	};
 
-	pinctrl_tc9595: tc9595-grp {
+	pinctrl_temp_sensor_som: tempsensorsomgrp {
 		fsl,pins = <
-			/* HYS | PD | FSEL_0 | no DSE */
-			MX93_PAD_CCM_CLKO4__GPIO4_IO29			0x1400
+			/* HYS | FSEL_0 | no DSE */
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11			0x1000
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 0b4b3bb866d0..8a88c98ac05a 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
- * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
  * D-82229 Seefeld, Germany.
  * Author: Markus Niebel
  * Author: Alexander Stein
@@ -26,10 +26,35 @@
 
 	aliases {
 		eeprom0 = &eeprom0;
-		ethernet0 = &fec;
-		ethernet1 = &eqos;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		rtc0 = &pcf85063;
 		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
 	};
 
 	backlight_lvds: backlight {
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
index 2cabdae24227..3a23e2eb9feb 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
 /*
- * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
  * D-82229 Seefeld, Germany.
  * Author: Markus Niebel
  */
@@ -11,6 +11,12 @@
 	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM";
 	compatible = "tq,imx93-tqma9352", "fsl,imx93";
 
+	memory@80000000 {
+		device_type = "memory";
+		/* our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -61,6 +67,7 @@
 		spi-max-frequency = <62000000>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5>;
 
 		partitions {
 			compatible = "fixed-partitions";
@@ -70,15 +77,6 @@
 	};
 };
 
-&gpio1 {
-	pmic-irq-hog {
-		gpio-hog;
-		gpios = <3 GPIO_ACTIVE_LOW>;
-		input;
-		line-name = "PMIC_IRQ#";
-	};
-};
-
 &lpi2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default", "sleep";
@@ -110,11 +108,11 @@
 				regulator-ramp-delay = <3125>;
 			};
 
-			/* V_DDRQ - 1.1 LPDDR4 or 0.6 LPDDR4X */
+			/* V_DDRQ - 0.6 V for LPDDR4X */
 			buck2: BUCK2 {
 				regulator-name = "BUCK2";
 				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1100000>;
+				regulator-max-microvolt = <600000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
index 576d6982a4a0..c789c1f24bdc 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
@@ -17,8 +17,25 @@
 	aliases {
 		ethernet0 = &eqos;
 		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
 	};
 
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
index 783938245e4f..2dc8b18ae91e 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
@@ -12,33 +12,54 @@
 	model = "Variscite VAR-SOM-MX93 module";
 	compatible = "variscite,var-som-mx93", "fsl,imx93";
 
-	mmc_pwrseq: mmc-pwrseq {
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "wm8904-audio";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"IN1L", "Microphone Jack",
+			"IN1R", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,mclk-fs = <256>;
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&wm8904>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+
+	usdhc3_pwrseq: mmc-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		post-power-on-delay-ms = <100>;
 		power-off-delay-us = <10000>;
 		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>,	/* WIFI_RESET */
 			      <&gpio3 7 GPIO_ACTIVE_LOW>;	/* WIFI_PWR_EN */
 	};
-
-	reg_eqos_phy: regulator-eqos-phy {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_eqos_phy>;
-		regulator-name = "eth_phy_pwr";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <100000>;
-		regulator-always-on;
-	};
 };
 
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy0>;
+	snps,clk-csr = <5>;
 	status = "okay";
 
 	mdio {
@@ -51,8 +72,199 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 			eee-broken-1000t;
+			reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <100000>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+			};
+		};
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c3_gpio>;
+	scl-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2237500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
 		};
 	};
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk IMX93_CLK_SAI1_GATE>;
+		clock-names = "mclk";
+		AVDD-supply = <&buck5>;
+		CPVDD-supply = <&buck5>;
+		DBVDD-supply = <&buck4>;
+		DCVDD-supply = <&buck5>;
+		MICVDD-supply = <&buck5>;
+		wlf,drc-cfg-names = "default", "peaklimiter", "tradition",
+				    "soft", "music";
+		/*
+		 * Config registers per name, respectively:
+		 * KNEE_IP = 0,   KNEE_OP = 0,     HI_COMP = 1,   LO_COMP = 1
+		 * KNEE_IP = -24, KNEE_OP = -6,    HI_COMP = 1/4, LO_COMP = 1
+		 * KNEE_IP = -42, KNEE_OP = -3,    HI_COMP = 0,   LO_COMP = 1
+		 * KNEE_IP = -45, KNEE_OP = -9,    HI_COMP = 1/8, LO_COMP = 1
+		 * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1
+		 */
+		wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
+				   /bits/ 16 <0x04af 0x324b 0x0010 0x0408>,
+				   /bits/ 16 <0x04af 0x324b 0x0028 0x0704>,
+				   /bits/ 16 <0x04af 0x324b 0x0018 0x078c>,
+				   /bits/ 16 <0x04af 0x324b 0x0010 0x050e>;
+		/* GPIO1 = DMIC_CLK, don't touch others */
+		wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;
+	};
+};
+
+&lpspi8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi8>;
+	cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* Resistive touch controller */
+	ads7846: touchscreen@0 {
+		compatible = "ti,ads7846";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_restouch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <1000000>;
+		pendown-gpio = <&gpio4 29 0>;
+		vcc-supply = <&buck5>;
+		ti,x-min = /bits/ 16 <125>;
+		ti,x-max = /bits/ 16 <4008>;
+		ti,y-min = /bits/ 16 <282>;
+		ti,y-max = /bits/ 16 <3864>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,debounce-max = /bits/ 16 <10>;
+		ti,debounce-tol = /bits/ 16 <3>;
+		ti,debounce-rep = /bits/ 16 <1>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+		ti,keep-vref-on;
+		wakeup-source;
+	};
+};
+
+/* BT module */
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart5>, <&pinctrl_bluetooth>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-1 = <&pinctrl_sai1_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
 };
 
 /* eMMC */
@@ -66,7 +278,27 @@
 	status = "okay";
 };
 
+/* WiFi */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
 &iomuxc {
+	pinctrl_bluetooth: bluetoothgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDIO__GPIO4_IO15		0x51e
+		>;
+	};
+
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
 			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
@@ -75,14 +307,15 @@
 			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
 			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
 			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
-			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x58e
 			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
 			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
 			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
 			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
 			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
-			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
 			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+			MX93_PAD_UART2_TXD__GPIO1_IO07				0x51e
 		>;
 	};
 
@@ -92,6 +325,68 @@
 		>;
 	};
 
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3_gpio: lpi2c3-gpiogrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__GPIO2_IO28		0x40000b9e
+			MX93_PAD_GPIO_IO29__GPIO2_IO29		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi8: lpspi8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO12__GPIO2_IO12		0x31e
+			MX93_PAD_GPIO_IO13__LPSPI8_SIN		0x31e
+			MX93_PAD_GPIO_IO14__LPSPI8_SOUT		0x31e
+			MX93_PAD_GPIO_IO15__LPSPI8_SCK		0x31e
+		>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX   0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX            0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B   0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B  0x31e
+		>;
+	};
+
+	pinctrl_restouch: restouchgrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29		0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK		0x31e
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x31e
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00	0x31e
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00	0x31e
+			MX93_PAD_I2C2_SDA__SAI1_RX_BCLK		0x31e
+			MX93_PAD_I2C2_SCL__SAI1_RX_SYNC		0x31e
+			MX93_PAD_UART2_RXD__SAI1_MCLK		0x31e
+		>;
+	};
+
+	pinctrl_sai1_sleep: sai1-sleepgrp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__GPIO1_IO12		0x31e
+			MX93_PAD_SAI1_TXFS__GPIO1_IO11		0x31e
+			MX93_PAD_SAI1_TXD0__GPIO1_IO13		0x31e
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14		0x31e
+			MX93_PAD_UART2_RXD__GPIO1_IO06		0x31e
+			MX93_PAD_I2C2_SDA__GPIO1_IO03		0x31e
+			MX93_PAD_I2C2_SCL__GPIO1_IO02		0x31e
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
@@ -107,4 +402,55 @@
 			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
 		>;
 	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x1582 /* SDIO_B_CLK */
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x40001382 /* SDIO_B_CMD */
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x40001382 /* SDIO_B_D0 */
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x40001382 /* SDIO_B_D1 */
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x40001382 /* SDIO_B_D2 */
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x40001382 /* SDIO_B_D3 */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x158e /* SDIO_B_CLK */
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x4000138e /* SDIO_B_CMD */
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x4000138e /* SDIO_B_D0 */
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x4000138e /* SDIO_B_D1 */
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x4000138e /* SDIO_B_D2 */
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x4000138e /* SDIO_B_D3 */
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x15fe /* SDIO_B_CLK */
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x400013fe /* SDIO_B_CMD */
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x400013fe /* SDIO_B_D0 */
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1	0x400013fe /* SDIO_B_D1 */
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2	0x400013fe /* SDIO_B_D2 */
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3	0x400013fe /* SDIO_B_D3 */
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__GPIO3_IO20		0x400
+			MX93_PAD_SD3_CMD__GPIO3_IO21		0x400
+			MX93_PAD_SD3_DATA0__GPIO3_IO22		0x400
+			MX93_PAD_SD3_DATA1__GPIO3_IO23		0x400
+			MX93_PAD_SD3_DATA2__GPIO3_IO24		0x400
+			MX93_PAD_SD3_DATA3__GPIO3_IO25		0x400
+		>;
+	};
+
+	pinctrl_usdhc3_wlan: usdhc3-wlangrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__GPIO4_IO14		0x51e /* WIFI_REG_ON     */
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x51e /* WIFI_PWR_EN     */
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 688488de8cd2..7b27012dfcb5 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1,187 +1,15 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright 2022 NXP
+ * Copyright 2022,2025 NXP
  */
 
-#include <dt-bindings/clock/imx93-clock.h>
-#include <dt-bindings/dma/fsl-edma.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/fsl,imx93-power.h>
-#include <dt-bindings/thermal/thermal.h>
+#include "imx91_93_common.dtsi"
 
-#include "imx93-pinfunc.h"
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		i2c0 = &lpi2c1;
-		i2c1 = &lpi2c2;
-		i2c2 = &lpi2c3;
-		i2c3 = &lpi2c4;
-		i2c4 = &lpi2c5;
-		i2c5 = &lpi2c6;
-		i2c6 = &lpi2c7;
-		i2c7 = &lpi2c8;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &lpuart1;
-		serial1 = &lpuart2;
-		serial2 = &lpuart3;
-		serial3 = &lpuart4;
-		serial4 = &lpuart5;
-		serial5 = &lpuart6;
-		serial6 = &lpuart7;
-		serial7 = &lpuart8;
-		spi0 = &lpspi1;
-		spi1 = &lpspi2;
-		spi2 = &lpspi3;
-		spi3 = &lpspi4;
-		spi4 = &lpspi5;
-		spi5 = &lpspi6;
-		spi6 = &lpspi7;
-		spi7 = &lpspi8;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		idle-states {
-			entry-method = "psci";
-
-			cpu_pd_wait: cpu-pd-wait {
-				compatible = "arm,idle-state";
-				arm,psci-suspend-param = <0x0010033>;
-				local-timer-stop;
-				entry-latency-us = <10000>;
-				exit-latency-us = <7000>;
-				min-residency-us = <27000>;
-				wakeup-latency-us = <15000>;
-			};
-		};
-
-		A55_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a55";
-			reg = <0x0>;
-			enable-method = "psci";
-			#cooling-cells = <2>;
-			cpu-idle-states = <&cpu_pd_wait>;
-			i-cache-size = <32768>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <128>;
-			d-cache-size = <32768>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
-			next-level-cache = <&l2_cache_l0>;
-		};
-
-		A55_1: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a55";
-			reg = <0x100>;
-			enable-method = "psci";
-			#cooling-cells = <2>;
-			cpu-idle-states = <&cpu_pd_wait>;
-			i-cache-size = <32768>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <128>;
-			d-cache-size = <32768>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
-			next-level-cache = <&l2_cache_l1>;
-		};
-
-		l2_cache_l0: l2-cache-l0 {
-			compatible = "cache";
-			cache-size = <65536>;
-			cache-line-size = <64>;
-			cache-sets = <256>;
-			cache-level = <2>;
-			cache-unified;
-			next-level-cache = <&l3_cache>;
-		};
-
-		l2_cache_l1: l2-cache-l1 {
-			compatible = "cache";
-			cache-size = <65536>;
-			cache-line-size = <64>;
-			cache-sets = <256>;
-			cache-level = <2>;
-			cache-unified;
-			next-level-cache = <&l3_cache>;
-		};
-
-		l3_cache: l3-cache {
-			compatible = "cache";
-			cache-size = <262144>;
-			cache-line-size = <64>;
-			cache-sets = <256>;
-			cache-level = <3>;
-			cache-unified;
-		};
-	};
-
-	osc_32k: clock-osc-32k {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "osc_32k";
-	};
-
-	osc_24m: clock-osc-24m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc_24m";
-	};
-
-	clk_ext1: clock-ext1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <133000000>;
-		clock-output-names = "clk_ext1";
-	};
-
-	pmu {
-		compatible = "arm,cortex-a55-pmu";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <24000000>;
-		arm,no-tick-in-suspend;
-		interrupt-parent = <&gic>;
-	};
-
-	gic: interrupt-controller@48000000 {
-		compatible = "arm,gic-v3";
-		reg = <0 0x48000000 0 0x10000>,
-		      <0 0x48040000 0 0xc0000>;
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gic>;
+/{
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx93-cm33";
+		clocks = <&clk IMX93_CLK_CM33_GATE>;
+		status = "disabled";
 	};
 
 	thermal-zones {
@@ -215,1129 +43,119 @@
 			};
 		};
 	};
+};
 
-	cm33: remoteproc-cm33 {
-		compatible = "fsl,imx93-cm33";
-		clocks = <&clk IMX93_CLK_CM33_GATE>;
+&aips1 {
+	mu1: mailbox@44230000 {
+		compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+		reg = <0x44230000 0x10000>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_MU1_B_GATE>;
+		#mbox-cells = <2>;
 		status = "disabled";
 	};
 
-	mqs1: mqs1 {
-		compatible = "fsl,imx93-mqs";
-		gpr = <&aonmix_ns_gpr>;
-		status = "disabled";
+	tmu: tmu@44482000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0x44482000 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_TMC_GATE>;
+		#thermal-sensor-cells = <1>;
+		little-endian;
+		fsl,tmu-range = <0x800000da 0x800000e9
+				 0x80000102 0x8000012a
+				 0x80000166 0x800001a7
+				 0x800001b6>;
+		fsl,tmu-calibration = <0x00000000 0x0000000e
+				       0x00000001 0x00000029
+				       0x00000002 0x00000056
+				       0x00000003 0x000000a2
+				       0x00000004 0x00000116
+				       0x00000005 0x00000195
+				       0x00000006 0x000001b2>;
 	};
+};
 
-	mqs2: mqs2 {
-		compatible = "fsl,imx93-mqs";
-		gpr = <&wakeupmix_gpr>;
+&aips2 {
+	mu2: mailbox@42440000 {
+		compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+		reg = <0x42440000 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_MU2_B_GATE>;
+		#mbox-cells = <2>;
 		status = "disabled";
 	};
+};
 
-	usbphynop1: usbphynop1 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
-		clock-names = "main_clk";
-	};
-
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
-		clock-names = "main_clk";
+&cpus {
+	A55_0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a55";
+		reg = <0x0>;
+		enable-method = "psci";
+		#cooling-cells = <2>;
+		cpu-idle-states = <&cpu_pd_wait>;
+		i-cache-size = <32768>;
+		i-cache-line-size = <64>;
+		i-cache-sets = <128>;
+		d-cache-size = <32768>;
+		d-cache-line-size = <64>;
+		d-cache-sets = <128>;
+		next-level-cache = <&l2_cache_l0>;
+	};
+
+	A55_1: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a55";
+		reg = <0x100>;
+		enable-method = "psci";
+		#cooling-cells = <2>;
+		cpu-idle-states = <&cpu_pd_wait>;
+		i-cache-size = <32768>;
+		i-cache-line-size = <64>;
+		i-cache-sets = <128>;
+		d-cache-size = <32768>;
+		d-cache-line-size = <64>;
+		d-cache-sets = <128>;
+		next-level-cache = <&l2_cache_l1>;
+	};
+
+	l2_cache_l0: l2-cache-l0 {
+		compatible = "cache";
+		cache-size = <65536>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <2>;
+		cache-unified;
+		next-level-cache = <&l3_cache>;
+	};
+
+	l2_cache_l1: l2-cache-l1 {
+		compatible = "cache";
+		cache-size = <65536>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <2>;
+		cache-unified;
+		next-level-cache = <&l3_cache>;
+	};
+
+	l3_cache: l3-cache {
+		compatible = "cache";
+		cache-size = <262144>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <3>;
+		cache-unified;
 	};
+};
 
-	soc@0 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x0 0x80000000>,
-			 <0x28000000 0x0 0x28000000 0x10000000>;
-
-		aips1: bus@44000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x44000000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			edma1: dma-controller@44000000 {
-				compatible = "fsl,imx93-edma3";
-				reg = <0x44000000 0x200000>;
-				#dma-cells = <3>;
-				dma-channels = <31>;
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,  //  0: Reserved
-					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  //  1: CANFD1
-					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,  //  2: Reserved
-					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,  //  3: GPIO1 CH0
-					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,  //  4: GPIO1 CH1
-					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, //  5: I3C1 TO Bus
-					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, //  6: I3C1 From Bus
-					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, //  7: LPI2C1 M TX
-					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, //  8: LPI2C1 S TX
-					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, //  9: LPI2C2 M RX
-					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
-					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
-					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
-					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
-					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
-					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
-					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
-					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
-					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
-					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
-					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
-					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
-					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
-					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
-					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
-					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
-					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
-					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
-					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
-					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
-					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; // 30: ADC1
-				clocks = <&clk IMX93_CLK_EDMA1_GATE>;
-				clock-names = "dma";
-			};
-
-			aonmix_ns_gpr: syscon@44210000 {
-				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
-				reg = <0x44210000 0x1000>;
-			};
-
-			mu1: mailbox@44230000 {
-				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
-				reg = <0x44230000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_MU1_B_GATE>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
-			system_counter: timer@44290000 {
-				compatible = "nxp,sysctr-timer";
-				reg = <0x44290000 0x30000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&osc_24m>;
-				clock-names = "per";
-				nxp,no-divider;
-			};
-
-			wdog1: watchdog@442d0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x442d0000 0x10000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG1_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			wdog2: watchdog@442e0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x442e0000 0x10000>;
-				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG2_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			tpm1: pwm@44310000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x44310000 0x1000>;
-				clocks = <&clk IMX93_CLK_TPM1_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm2: pwm@44320000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x44320000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM2_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			i3c1: i3c@44330000 {
-				compatible = "silvaco,i3c-master-v1";
-				reg = <0x44330000 0x10000>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <3>;
-				#size-cells = <0>;
-				clocks = <&clk IMX93_CLK_BUS_AON>,
-					 <&clk IMX93_CLK_I3C1_GATE>,
-					 <&clk IMX93_CLK_I3C1_SLOW>;
-				clock-names = "pclk", "fast_clk", "slow_clk";
-				status = "disabled";
-			};
-
-			lpi2c1: i2c@44340000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x44340000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				dmas = <&edma1 7 0 0>, <&edma1 8 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpi2c2: i2c@44350000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x44350000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				dmas = <&edma1 9 0 0>, <&edma1 10 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi1: spi@44360000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x44360000 0x10000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				dmas = <&edma1 11 0 0>, <&edma1 12 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi2: spi@44370000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x44370000 0x10000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				dmas = <&edma1 13 0 0>, <&edma1 14 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpuart1: serial@44380000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x44380000 0x1000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart2: serial@44390000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x44390000 0x1000>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			flexcan1: can@443a0000 {
-				compatible = "fsl,imx93-flexcan";
-				reg = <0x443a0000 0x10000>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_AON>,
-					 <&clk IMX93_CLK_CAN1_GATE>;
-				clock-names = "ipg", "per";
-				assigned-clocks = <&clk IMX93_CLK_CAN1>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-				assigned-clock-rates = <40000000>;
-				fsl,clk-source = /bits/ 8 <0>;
-				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
-				status = "disabled";
-			};
-
-			sai1: sai@443b0000 {
-				compatible = "fsl,imx93-sai";
-				reg = <0x443b0000 0x10000>;
-				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>;
-				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
-				dma-names = "rx", "tx";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			iomuxc: pinctrl@443c0000 {
-				compatible = "fsl,imx93-iomuxc";
-				reg = <0x443c0000 0x10000>;
-				status = "okay";
-			};
-
-			bbnsm: bbnsm@44440000 {
-				compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
-				reg = <0x44440000 0x10000>;
-
-				bbnsm_rtc: rtc {
-					compatible = "nxp,imx93-bbnsm-rtc";
-					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				bbnsm_pwrkey: pwrkey {
-					compatible = "nxp,imx93-bbnsm-pwrkey";
-					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-					linux,code = <KEY_POWER>;
-				};
-			};
-
-			clk: clock-controller@44450000 {
-				compatible = "fsl,imx93-ccm";
-				reg = <0x44450000 0x10000>;
-				#clock-cells = <1>;
-				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
-				clock-names = "osc_32k", "osc_24m", "clk_ext1";
-				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
-				assigned-clock-rates = <393216000>;
-				status = "okay";
-			};
-
-			src: system-controller@44460000 {
-				compatible = "fsl,imx93-src", "syscon";
-				reg = <0x44460000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				mlmix: power-domain@44461800 {
-					compatible = "fsl,imx93-src-slice";
-					reg = <0x44461800 0x400>, <0x44464800 0x400>;
-					#power-domain-cells = <0>;
-					clocks = <&clk IMX93_CLK_ML_APB>,
-						 <&clk IMX93_CLK_ML>;
-				};
-
-				mediamix: power-domain@44462400 {
-					compatible = "fsl,imx93-src-slice";
-					reg = <0x44462400 0x400>, <0x44465800 0x400>;
-					#power-domain-cells = <0>;
-					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
-						 <&clk IMX93_CLK_MEDIA_APB>;
-				};
-			};
-
-			clock-controller@44480000 {
-				compatible = "fsl,imx93-anatop";
-				reg = <0x44480000 0x2000>;
-				#clock-cells = <1>;
-			};
-
-			tmu: tmu@44482000 {
-				compatible = "fsl,qoriq-tmu";
-				reg = <0x44482000 0x1000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_TMC_GATE>;
-				little-endian;
-				fsl,tmu-range = <0x800000da 0x800000e9
-						 0x80000102 0x8000012a
-						 0x80000166 0x800001a7
-						 0x800001b6>;
-				fsl,tmu-calibration = <0x00000000 0x0000000e
-						       0x00000001 0x00000029
-						       0x00000002 0x00000056
-						       0x00000003 0x000000a2
-						       0x00000004 0x00000116
-						       0x00000005 0x00000195
-						       0x00000006 0x000001b2>;
-				#thermal-sensor-cells = <1>;
-			};
-
-			micfil: micfil@44520000 {
-				compatible = "fsl,imx93-micfil";
-				reg = <0x44520000 0x10000>;
-				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_PDM_IPG>,
-					 <&clk IMX93_CLK_PDM_GATE>,
-					 <&clk IMX93_CLK_AUDIO_PLL>;
-				clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
-				dmas = <&edma1 29 0 5>;
-				dma-names = "rx";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			adc1: adc@44530000 {
-				compatible = "nxp,imx93-adc";
-				reg = <0x44530000 0x10000>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_ADC1_GATE>;
-				clock-names = "ipg";
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-		};
-
-		aips2: bus@42000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x42000000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			edma2: dma-controller@42000000 {
-				compatible = "fsl,imx93-edma4";
-				reg = <0x42000000 0x210000>;
-				#dma-cells = <3>;
-				dma-channels = <64>;
-				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_EDMA2_GATE>;
-				clock-names = "dma";
-			};
-
-			wakeupmix_gpr: syscon@42420000 {
-				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
-				reg = <0x42420000 0x1000>;
-			};
-
-			mu2: mailbox@42440000 {
-				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
-				reg = <0x42440000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_MU2_B_GATE>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
-			wdog3: watchdog@42490000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x42490000 0x10000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			wdog4: watchdog@424a0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x424a0000 0x10000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG4_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			wdog5: watchdog@424b0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x424b0000 0x10000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG5_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			tpm3: pwm@424e0000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x424e0000 0x1000>;
-				clocks = <&clk IMX93_CLK_TPM3_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm4: pwm@424f0000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x424f0000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM4_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm5: pwm@42500000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x42500000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM5_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm6: pwm@42510000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x42510000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM6_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			i3c2: i3c@42520000 {
-				compatible = "silvaco,i3c-master-v1";
-				reg = <0x42520000 0x10000>;
-				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <3>;
-				#size-cells = <0>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_I3C2_GATE>,
-					 <&clk IMX93_CLK_I3C2_SLOW>;
-				clock-names = "pclk", "fast_clk", "slow_clk";
-				status = "disabled";
-			};
-
-			lpi2c3: i2c@42530000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x42530000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpi2c4: i2c@42540000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x42540000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi3: spi@42550000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42550000 0x10000>;
-				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi4: spi@42560000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42560000 0x10000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpuart3: serial@42570000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42570000 0x1000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart4: serial@42580000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42580000 0x1000>;
-				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart5: serial@42590000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42590000 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart6: serial@425a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x425a0000 0x1000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			flexcan2: can@425b0000 {
-				compatible = "fsl,imx93-flexcan";
-				reg = <0x425b0000 0x10000>;
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_CAN2_GATE>;
-				clock-names = "ipg", "per";
-				assigned-clocks = <&clk IMX93_CLK_CAN2>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-				assigned-clock-rates = <40000000>;
-				fsl,clk-source = /bits/ 8 <0>;
-				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
-				status = "disabled";
-			};
-
-			flexspi1: spi@425e0000 {
-				compatible = "nxp,imx8mm-fspi";
-				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
-				reg-names = "fspi_base", "fspi_mmap";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
-					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
-				clock-names = "fspi_en", "fspi";
-				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
-				status = "disabled";
-			};
-
-			sai2: sai@42650000 {
-				compatible = "fsl,imx93-sai";
-				reg = <0x42650000 0x10000>;
-				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>;
-				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
-				dma-names = "rx", "tx";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			sai3: sai@42660000 {
-				compatible = "fsl,imx93-sai";
-				reg = <0x42660000 0x10000>;
-				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>;
-				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
-				dma-names = "rx", "tx";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			xcvr: xcvr@42680000 {
-				compatible = "fsl,imx93-xcvr";
-				reg = <0x42680000 0x800>,
-				      <0x42680800 0x400>,
-				      <0x42680c00 0x080>,
-				      <0x42680e00 0x080>;
-				reg-names = "ram", "regs", "rxfifo", "txfifo";
-				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_SPDIF_GATE>,
-					 <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
-				clock-names = "ipg", "phy", "spba", "pll_ipg";
-				dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
-				dma-names = "rx", "tx";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			lpuart7: serial@42690000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42690000 0x1000>;
-				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart8: serial@426a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x426a0000 0x1000>;
-				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpi2c5: i2c@426b0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426b0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpi2c6: i2c@426c0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426c0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpi2c7: i2c@426d0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426d0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpi2c8: i2c@426e0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426e0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi5: spi@426f0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x426f0000 0x10000>;
-				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi6: spi@42700000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42700000 0x10000>;
-				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi7: spi@42710000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42710000 0x10000>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi8: spi@42720000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42720000 0x10000>;
-				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-		};
-
-		aips3: bus@42800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x42800000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usdhc1: mmc@42850000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x42850000 0x10000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_WAKEUP_AXI>,
-					 <&clk IMX93_CLK_USDHC1_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX93_CLK_USDHC1>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
-				assigned-clock-rates = <400000000>;
-				bus-width = <8>;
-				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step = <2>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@42860000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x42860000 0x10000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_WAKEUP_AXI>,
-					 <&clk IMX93_CLK_USDHC2_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX93_CLK_USDHC2>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
-				assigned-clock-rates = <400000000>;
-				bus-width = <4>;
-				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step = <2>;
-				status = "disabled";
-			};
-
-			fec: ethernet@42890000 {
-				compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
-				reg = <0x42890000 0x10000>;
-				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_ENET1_GATE>,
-					 <&clk IMX93_CLK_ENET1_GATE>,
-					 <&clk IMX93_CLK_ENET_TIMER1>,
-					 <&clk IMX93_CLK_ENET_REF>,
-					 <&clk IMX93_CLK_ENET_REF_PHY>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
-				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
-						  <&clk IMX93_CLK_ENET_REF>,
-						  <&clk IMX93_CLK_ENET_REF_PHY>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
-							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
-							 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-				assigned-clock-rates = <100000000>, <250000000>, <50000000>;
-				fsl,num-tx-queues = <3>;
-				fsl,num-rx-queues = <3>;
-				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
-				nvmem-cells = <&eth_mac1>;
-				nvmem-cell-names = "mac-address";
-				status = "disabled";
-			};
-
-			eqos: ethernet@428a0000 {
-				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
-				reg = <0x428a0000 0x10000>;
-				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "macirq", "eth_wake_irq";
-				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
-					 <&clk IMX93_CLK_ENET_QOS_GATE>,
-					 <&clk IMX93_CLK_ENET_TIMER2>,
-					 <&clk IMX93_CLK_ENET>,
-					 <&clk IMX93_CLK_ENET_QOS_GATE>;
-				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
-				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
-						  <&clk IMX93_CLK_ENET>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
-							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
-				assigned-clock-rates = <100000000>, <250000000>;
-				intf_mode = <&wakeupmix_gpr 0x28>;
-				snps,clk-csr = <6>;
-				nvmem-cells = <&eth_mac2>;
-				nvmem-cell-names = "mac-address";
-				status = "disabled";
-			};
-
-			usdhc3: mmc@428b0000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x428b0000 0x10000>;
-				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_WAKEUP_AXI>,
-					 <&clk IMX93_CLK_USDHC3_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX93_CLK_USDHC3>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
-				assigned-clock-rates = <400000000>;
-				bus-width = <4>;
-				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step = <2>;
-				status = "disabled";
-			};
-		};
-
-		gpio2: gpio@43810000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x43810000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
-				 <&clk IMX93_CLK_GPIO2_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 4 30>;
-		};
-
-		gpio3: gpio@43820000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x43820000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
-				 <&clk IMX93_CLK_GPIO3_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
-				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
-		};
-
-		gpio4: gpio@43830000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x43830000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
-				 <&clk IMX93_CLK_GPIO4_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
-		};
-
-		gpio1: gpio@47400000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x47400000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
-				 <&clk IMX93_CLK_GPIO1_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 92 16>;
-		};
-
-		ocotp: efuse@47510000 {
-			compatible = "fsl,imx93-ocotp", "syscon";
-			reg = <0x47510000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			eth_mac1: mac-address@4ec {
-				reg = <0x4ec 0x6>;
-			};
-
-			eth_mac2: mac-address@4f2 {
-				reg = <0x4f2 0x6>;
-			};
-
-		};
-
-		s4muap: mailbox@47520000 {
-			compatible = "fsl,imx93-mu-s4";
-			reg = <0x47520000 0x10000>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			#mbox-cells = <2>;
-		};
-
-		media_blk_ctrl: system-controller@4ac10000 {
-			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
-			reg = <0x4ac10000 0x10000>;
-			power-domains = <&mediamix>;
-			clocks = <&clk IMX93_CLK_MEDIA_APB>,
-				 <&clk IMX93_CLK_MEDIA_AXI>,
-				 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
-				 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
-				 <&clk IMX93_CLK_CAM_PIX>,
-				 <&clk IMX93_CLK_PXP_GATE>,
-				 <&clk IMX93_CLK_LCDIF_GATE>,
-				 <&clk IMX93_CLK_ISI_GATE>,
-				 <&clk IMX93_CLK_MIPI_CSI_GATE>,
-				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
-			clock-names = "apb", "axi", "nic", "disp", "cam",
-				      "pxp", "lcdif", "isi", "csi", "dsi";
-			#power-domain-cells = <1>;
-			status = "disabled";
-		};
-
-		usbotg1: usb@4c100000 {
-			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
-			reg = <0x4c100000 0x200>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
-				 <&clk IMX93_CLK_HSIO_32K_GATE>;
-			clock-names = "usb_ctrl_root", "usb_wakeup";
-			assigned-clocks = <&clk IMX93_CLK_HSIO>;
-			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-			assigned-clock-rates = <133000000>;
-			phys = <&usbphynop1>;
-			fsl,usbmisc = <&usbmisc1 0>;
-			status = "disabled";
-		};
-
-		usbmisc1: usbmisc@4c100200 {
-			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
-				     "fsl,imx6q-usbmisc";
-			reg = <0x4c100200 0x200>;
-			#index-cells = <1>;
-		};
-
-		usbotg2: usb@4c200000 {
-			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
-			reg = <0x4c200000 0x200>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
-				 <&clk IMX93_CLK_HSIO_32K_GATE>;
-			clock-names = "usb_ctrl_root", "usb_wakeup";
-			assigned-clocks = <&clk IMX93_CLK_HSIO>;
-			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-			assigned-clock-rates = <133000000>;
-			phys = <&usbphynop2>;
-			fsl,usbmisc = <&usbmisc2 0>;
-			status = "disabled";
-		};
-
-		usbmisc2: usbmisc@4c200200 {
-			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
-				     "fsl,imx6q-usbmisc";
-			reg = <0x4c200200 0x200>;
-			#index-cells = <1>;
-		};
-
-		ddr-pmu@4e300dc0 {
-			compatible = "fsl,imx93-ddr-pmu";
-			reg = <0x4e300dc0 0x200>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		};
+&src {
+	mlmix: power-domain@44461800 {
+		compatible = "fsl,imx93-src-slice";
+		reg = <0x44461800 0x400>, <0x44464800 0x400>;
+		clocks = <&clk IMX93_CLK_ML_APB>,
+			 <&clk IMX93_CLK_ML>;
+		#power-domain-cells = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx94-clock.h b/arch/arm64/boot/dts/freescale/imx94-clock.h
new file mode 100644
index 000000000000..27e8c0839722
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94-clock.h
@@ -0,0 +1,193 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#ifndef __IMX94_CLOCK_H
+#define __IMX94_CLOCK_H
+
+#define IMX94_CLK_EXT				0
+#define IMX94_CLK_32K				1
+#define IMX94_CLK_24M				2
+#define IMX94_CLK_FRO				3
+#define IMX94_CLK_SYSPLL1_VCO			4
+#define IMX94_CLK_SYSPLL1_PFD0_UNGATED		5
+#define IMX94_CLK_SYSPLL1_PFD0			6
+#define IMX94_CLK_SYSPLL1_PFD0_DIV2		7
+#define IMX94_CLK_SYSPLL1_PFD1_UNGATED		8
+#define IMX94_CLK_SYSPLL1_PFD1			9
+#define IMX94_CLK_SYSPLL1_PFD1_DIV2		10
+#define IMX94_CLK_SYSPLL1_PFD2_UNGATED		11
+#define IMX94_CLK_SYSPLL1_PFD2			12
+#define IMX94_CLK_SYSPLL1_PFD2_DIV2		13
+#define IMX94_CLK_AUDIOPLL1_VCO			14
+#define IMX94_CLK_AUDIOPLL1			15
+#define IMX94_CLK_AUDIOPLL2_VCO			16
+#define IMX94_CLK_AUDIOPLL2			17
+#define IMX94_CLK_RESERVED18			18
+#define IMX94_CLK_RESERVED19			19
+#define IMX94_CLK_RESERVED20			20
+#define IMX94_CLK_RESERVED21			21
+#define IMX94_CLK_RESERVED22			22
+#define IMX94_CLK_RESERVED23			23
+#define IMX94_CLK_ENCPLL_VCO			24
+#define IMX94_CLK_ENCPLL_PFD0_UNGATED		25
+#define IMX94_CLK_ENCPLL_PFD0			26
+#define IMX94_CLK_ENCPLL_PFD1_UNGATED		27
+#define IMX94_CLK_ENCPLL_PFD1			28
+#define IMX94_CLK_ARMPLL_VCO			29
+#define IMX94_CLK_ARMPLL_PFD0_UNGATED		30
+#define IMX94_CLK_ARMPLL_PFD0			31
+#define IMX94_CLK_ARMPLL_PFD1_UNGATED		32
+#define IMX94_CLK_ARMPLL_PFD1			33
+#define IMX94_CLK_ARMPLL_PFD2_UNGATED		34
+#define IMX94_CLK_ARMPLL_PFD2			35
+#define IMX94_CLK_ARMPLL_PFD3_UNGATED		36
+#define IMX94_CLK_ARMPLL_PFD3			37
+#define IMX94_CLK_DRAMPLL_VCO			38
+#define IMX94_CLK_DRAMPLL			39
+#define IMX94_CLK_HSIOPLL_VCO			40
+#define IMX94_CLK_HSIOPLL			41
+#define IMX94_CLK_LDBPLL_VCO			42
+#define IMX94_CLK_LDBPLL			43
+#define IMX94_CLK_EXT1				44
+#define IMX94_CLK_EXT2				45
+#define IMX94_CLK_ADC				46
+#define IMX94_CLK_BUSAON			47
+#define IMX94_CLK_CAN1				48
+#define IMX94_CLK_GLITCHFILTER			49
+#define IMX94_CLK_GPT1				50
+#define IMX94_CLK_I3C1SLOW			51
+#define IMX94_CLK_LPI2C1			52
+#define IMX94_CLK_LPI2C2			53
+#define IMX94_CLK_LPSPI1			54
+#define IMX94_CLK_LPSPI2			55
+#define IMX94_CLK_LPTMR1			56
+#define IMX94_CLK_LPUART1			57
+#define IMX94_CLK_LPUART2			58
+#define IMX94_CLK_M33				59
+#define IMX94_CLK_M33SYSTICK			60
+#define IMX94_CLK_PDM				61
+#define IMX94_CLK_SAI1				62
+#define IMX94_CLK_TPM2				63
+#define IMX94_CLK_A55				64
+#define IMX94_CLK_A55MTRBUS			65
+#define IMX94_CLK_A55PERIPH			66
+#define IMX94_CLK_DRAMALT			67
+#define IMX94_CLK_DRAMAPB			68
+#define IMX94_CLK_DISPAPB			69
+#define IMX94_CLK_DISPAXI			70
+#define IMX94_CLK_DISPPIX			71
+#define IMX94_CLK_HSIOACSCAN480M		72
+#define IMX94_CLK_HSIOACSCAN80M			73
+#define IMX94_CLK_HSIO				74
+#define IMX94_CLK_HSIOPCIEAUX			75
+#define IMX94_CLK_HSIOPCIETEST160M		76
+#define IMX94_CLK_HSIOPCIETEST400M		77
+#define IMX94_CLK_HSIOPCIETEST500M		78
+#define IMX94_CLK_HSIOPCIETEST50M		79
+#define IMX94_CLK_HSIOUSBTEST60M		80
+#define IMX94_CLK_BUSM70			81
+#define IMX94_CLK_M70				82
+#define IMX94_CLK_M70SYSTICK			83
+#define IMX94_CLK_BUSM71			84
+#define IMX94_CLK_M71				85
+#define IMX94_CLK_M71SYSTICK			86
+#define IMX94_CLK_BUSNETCMIX			87
+#define IMX94_CLK_ECAT				88
+#define IMX94_CLK_ENET				89
+#define IMX94_CLK_ENETPHYTEST200M		90
+#define IMX94_CLK_ENETPHYTEST500M		91
+#define IMX94_CLK_ENETPHYTEST667M		92
+#define IMX94_CLK_ENETREF			93
+#define IMX94_CLK_ENETTIMER1			94
+#define IMX94_CLK_ENETTIMER2			95
+#define IMX94_CLK_ENETTIMER3			96
+#define IMX94_CLK_FLEXIO3			97
+#define IMX94_CLK_FLEXIO4			98
+#define IMX94_CLK_M33SYNC			99
+#define IMX94_CLK_M33SYNCSYSTICK		100
+#define IMX94_CLK_MAC0				101
+#define IMX94_CLK_MAC1				102
+#define IMX94_CLK_MAC2				103
+#define IMX94_CLK_MAC3				104
+#define IMX94_CLK_MAC4				105
+#define IMX94_CLK_MAC5				106
+#define IMX94_CLK_NOCAPB			107
+#define IMX94_CLK_NOC				108
+#define IMX94_CLK_NPUAPB			109
+#define IMX94_CLK_NPU				110
+#define IMX94_CLK_CCMCKO1			111
+#define IMX94_CLK_CCMCKO2			112
+#define IMX94_CLK_CCMCKO3			113
+#define IMX94_CLK_CCMCKO4			114
+#define IMX94_CLK_BISS				115
+#define IMX94_CLK_BUSWAKEUP			116
+#define IMX94_CLK_CAN2				117
+#define IMX94_CLK_CAN3				118
+#define IMX94_CLK_CAN4				119
+#define IMX94_CLK_CAN5				120
+#define IMX94_CLK_ENDAT21			121
+#define IMX94_CLK_ENDAT22			122
+#define IMX94_CLK_ENDAT31FAST			123
+#define IMX94_CLK_ENDAT31SLOW			124
+#define IMX94_CLK_FLEXIO1			125
+#define IMX94_CLK_FLEXIO2			126
+#define IMX94_CLK_GPT2				127
+#define IMX94_CLK_GPT3				128
+#define IMX94_CLK_GPT4				129
+#define IMX94_CLK_HIPERFACE1			130
+#define IMX94_CLK_HIPERFACE1SYNC		131
+#define IMX94_CLK_HIPERFACE2			132
+#define IMX94_CLK_HIPERFACE2SYNC		133
+#define IMX94_CLK_I3C2SLOW			134
+#define IMX94_CLK_LPI2C3			135
+#define IMX94_CLK_LPI2C4			136
+#define IMX94_CLK_LPI2C5			137
+#define IMX94_CLK_LPI2C6			138
+#define IMX94_CLK_LPI2C7			139
+#define IMX94_CLK_LPI2C8			140
+#define IMX94_CLK_LPSPI3			141
+#define IMX94_CLK_LPSPI4			142
+#define IMX94_CLK_LPSPI5			143
+#define IMX94_CLK_LPSPI6			144
+#define IMX94_CLK_LPSPI7			145
+#define IMX94_CLK_LPSPI8			146
+#define IMX94_CLK_LPTMR2			147
+#define IMX94_CLK_LPUART10			148
+#define IMX94_CLK_LPUART11			149
+#define IMX94_CLK_LPUART12			150
+#define IMX94_CLK_LPUART3			151
+#define IMX94_CLK_LPUART4			152
+#define IMX94_CLK_LPUART5			153
+#define IMX94_CLK_LPUART6			154
+#define IMX94_CLK_LPUART7			155
+#define IMX94_CLK_LPUART8			156
+#define IMX94_CLK_LPUART9			157
+#define IMX94_CLK_SAI2				158
+#define IMX94_CLK_SAI3				159
+#define IMX94_CLK_SAI4				160
+#define IMX94_CLK_SWOTRACE			161
+#define IMX94_CLK_TPM4				162
+#define IMX94_CLK_TPM5				163
+#define IMX94_CLK_TPM6				164
+#define IMX94_CLK_USBPHYBURUNIN			165
+#define IMX94_CLK_USDHC1			166
+#define IMX94_CLK_USDHC2			167
+#define IMX94_CLK_USDHC3			168
+#define IMX94_CLK_V2XPK				169
+#define IMX94_CLK_WAKEUPAXI			170
+#define IMX94_CLK_XSPISLVROOT			171
+#define IMX94_CLK_XSPI1				172
+#define IMX94_CLK_XSPI2				173
+#define IMX94_CLK_SEL_EXT			174
+#define IMX94_CLK_SEL_A55C0			175
+#define IMX94_CLK_SEL_A55C1			176
+#define IMX94_CLK_SEL_A55C2			177
+#define IMX94_CLK_SEL_A55C3			178
+#define IMX94_CLK_SEL_A55P			179
+#define IMX94_CLK_SEL_DRAM			180
+#define IMX94_CLK_SEL_TEMPSENSE			181
+#define IMX94_CLK_NPU_CGC			182
+
+#endif /* __IMX94_CLOCK_H */
diff --git a/arch/arm64/boot/dts/freescale/imx94-pinfunc.h b/arch/arm64/boot/dts/freescale/imx94-pinfunc.h
new file mode 100644
index 000000000000..00255db89185
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94-pinfunc.h
@@ -0,0 +1,1570 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#ifndef __DTS_IMX94_PINFUNC_H
+#define __DTS_IMX94_PINFUNC_H
+
+/* Drive Strength */
+#define IMX94_DSE_X1		0x2
+#define IMX94_DSE_X2		0x6
+#define IMX94_DSE_X3		0xe
+#define IMX94_DSE_X4		0x1e
+#define IMX94_DSE_X5		0x3e
+#define IMX94_DSE_X6		0x7e
+
+/* Slew Rate */
+#define IMX94_FSEL_FAST		0x180
+#define IMX94_FSEL_SLOW		0x100
+
+/* Pull Up */
+#define IMX94_PU_ENABLE		0x200
+#define IMX94_PU_DISABLE	0x0
+
+/* Pull Down */
+#define IMX94_PD_ENABLE		0x400
+#define IMX94_PD_DISABLE	0x0
+
+/* Open Drain */
+#define IMX94_OD_ENABLE		0x800
+#define IMX94_OD_DISABLE	0x0
+
+/* Schmitt trigger */
+#define IMX94_HYS_SCHMITT	0x1000
+#define IMX94_HYS_NO_SCHMITT	0x0
+
+/*
+ * The pin function ID is a tuple of <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define IMX94_PAD_DAP_TDI__JTAG_MUX_TDI                     0x0000 0x0304 0x092c 0x00 0x00
+#define IMX94_PAD_DAP_TDI__MQS2_LEFT                        0x0000 0x0304 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TDI__ECAT_LED_ERR                     0x0000 0x0304 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TDI__CAN2_TX                          0x0000 0x0304 0x0000 0x03 0x00
+#define IMX94_PAD_DAP_TDI__SINC_FILTER_GLUE3_BREAK          0x0000 0x0304 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TDI__GPIO4_IO4                        0x0000 0x0304 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TDI__LPUART5_RX                       0x0000 0x0304 0x07bc 0x06 0x00
+#define IMX94_PAD_DAP_TDI__XBAR1_XBAR_INOUT26               0x0000 0x0304 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS               0x0004 0x0308 0x0930 0x00 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__CAN5_TX                    0x0004 0x0308 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__GPT_MUX_INOUT10            0x0004 0x0308 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__LPUART8_TX                 0x0004 0x0308 0x07dc 0x03 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__SINC3_MOD_CLK1             0x0004 0x0308 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__GPIO4_IO5                  0x0004 0x0308 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B              0x0004 0x0308 0x0000 0x06 0x00
+#define IMX94_PAD_DAP_TMS_SWDIO__XBAR1_XBAR_INOUT27         0x0004 0x0308 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK              0x0008 0x030c 0x0928 0x00 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__CAN5_RX                   0x0008 0x030c 0x0688 0x01 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__GPT_MUX_INOUT11           0x0008 0x030c 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__LPUART8_RX                0x0008 0x030c 0x07d8 0x03 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__SINC3_MOD_CLK0            0x0008 0x030c 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__GPIO4_IO6                 0x0008 0x030c 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B             0x0008 0x030c 0x07b8 0x06 0x00
+#define IMX94_PAD_DAP_TCLK_SWCLK__XBAR1_XBAR_INOUT28        0x0008 0x030c 0x0000 0x07 0x00
+
+#define IMX94_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO            0x000c 0x0310 0x0000 0x00 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT              0x000c 0x0310 0x0000 0x01 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__ECAT_RESET_OUT          0x000c 0x0310 0x0000 0x02 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__CAN2_RX                 0x000c 0x0310 0x067c 0x03 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__SINC3_MOD_CLK2          0x000c 0x0310 0x0000 0x04 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__GPIO4_IO7               0x000c 0x0310 0x0000 0x05 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__LPUART5_TX              0x000c 0x0310 0x07c0 0x06 0x00
+#define IMX94_PAD_DAP_TDO_TRACESWO__XBAR1_XBAR_INOUT29      0x000c 0x0310 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO00__GPIO2_IO0                      0x0010 0x0314 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO00__I3C2_PUR                       0x0010 0x0314 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO00__XBAR1_XBAR_INOUT39             0x0010 0x0314 0x08d4 0x02 0x00
+#define IMX94_PAD_GPIO_IO00__I3C2_PUR_B                     0x0010 0x0314 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO00__LPSPI6_PCS0                    0x0010 0x0314 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO00__LPUART5_TX                     0x0010 0x0314 0x07c0 0x05 0x01
+#define IMX94_PAD_GPIO_IO00__LPI2C5_SDA                     0x0010 0x0314 0x0740 0x06 0x00
+#define IMX94_PAD_GPIO_IO00__FLEXIO1_FLEXIO0                0x0010 0x0314 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO01__GPIO2_IO1                      0x0014 0x0318 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO01__I3C2_SCL                       0x0014 0x0318 0x0720 0x01 0x00
+#define IMX94_PAD_GPIO_IO01__XBAR1_XBAR_INOUT40             0x0014 0x0318 0x08d8 0x02 0x00
+#define IMX94_PAD_GPIO_IO01__EWM_OUT_B                      0x0014 0x0318 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO01__LPSPI6_SIN                     0x0014 0x0318 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO01__LPUART5_RX                     0x0014 0x0318 0x07bc 0x05 0x01
+#define IMX94_PAD_GPIO_IO01__LPI2C5_SCL                     0x0014 0x0318 0x073c 0x06 0x00
+#define IMX94_PAD_GPIO_IO01__FLEXIO1_FLEXIO1                0x0014 0x0318 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO02__GPIO2_IO2                      0x0018 0x031c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO02__I3C2_SDA                       0x0018 0x031c 0x0724 0x01 0x00
+#define IMX94_PAD_GPIO_IO02__XBAR1_XBAR_INOUT41             0x0018 0x031c 0x08dc 0x02 0x00
+#define IMX94_PAD_GPIO_IO02__GPT_MUX_INOUT1                 0x0018 0x031c 0x0700 0x03 0x00
+#define IMX94_PAD_GPIO_IO02__LPSPI6_SOUT                    0x0018 0x031c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO02__LPUART5_CTS_B                  0x0018 0x031c 0x07b8 0x05 0x01
+#define IMX94_PAD_GPIO_IO02__LPI2C6_SDA                     0x0018 0x031c 0x074c 0x06 0x00
+#define IMX94_PAD_GPIO_IO02__FLEXIO1_FLEXIO2                0x0018 0x031c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO03__GPIO2_IO3                      0x001c 0x0320 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO03__EWM_OUT_B                      0x001c 0x0320 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO03__XBAR1_XBAR_INOUT42             0x001c 0x0320 0x08e0 0x02 0x00
+#define IMX94_PAD_GPIO_IO03__GPT_MUX_INOUT4                 0x001c 0x0320 0x0708 0x03 0x00
+#define IMX94_PAD_GPIO_IO03__LPSPI6_SCK                     0x001c 0x0320 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO03__LPUART5_RTS_B                  0x001c 0x0320 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO03__LPI2C6_SCL                     0x001c 0x0320 0x0748 0x06 0x00
+#define IMX94_PAD_GPIO_IO03__FLEXIO1_FLEXIO3                0x001c 0x0320 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO04__GPIO2_IO4                      0x0020 0x0324 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO04__TPM3_CH0                       0x0020 0x0324 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO04__PDM_CLK                        0x0020 0x0324 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO04__GPT_MUX_INOUT5                 0x0020 0x0324 0x070c 0x03 0x00
+#define IMX94_PAD_GPIO_IO04__LPSPI7_PCS0                    0x0020 0x0324 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO04__LPUART6_TX                     0x0020 0x0324 0x07cc 0x05 0x00
+#define IMX94_PAD_GPIO_IO04__LPI2C6_SDA                     0x0020 0x0324 0x074c 0x06 0x01
+#define IMX94_PAD_GPIO_IO04__FLEXIO1_FLEXIO4                0x0020 0x0324 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO05__GPIO2_IO5                      0x0024 0x0328 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO05__TPM4_CH0                       0x0024 0x0328 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO05__PDM_BIT_STREAM0                0x0024 0x0328 0x0610 0x02 0x00
+#define IMX94_PAD_GPIO_IO05__GPT_MUX_INOUT7                 0x0024 0x0328 0x0714 0x03 0x00
+#define IMX94_PAD_GPIO_IO05__LPSPI7_SIN                     0x0024 0x0328 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO05__LPUART6_RX                     0x0024 0x0328 0x07c8 0x05 0x00
+#define IMX94_PAD_GPIO_IO05__LPI2C6_SCL                     0x0024 0x0328 0x0748 0x06 0x01
+#define IMX94_PAD_GPIO_IO05__FLEXIO1_FLEXIO5                0x0024 0x0328 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO06__GPIO2_IO6                      0x0028 0x032c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO06__TPM5_CH0                       0x0028 0x032c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO06__PDM_BIT_STREAM1                0x0028 0x032c 0x0614 0x02 0x00
+#define IMX94_PAD_GPIO_IO06__GPT_MUX_INOUT8                 0x0028 0x032c 0x0718 0x03 0x00
+#define IMX94_PAD_GPIO_IO06__LPSPI7_SOUT                    0x0028 0x032c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO06__LPUART6_CTS_B                  0x0028 0x032c 0x07c4 0x05 0x00
+#define IMX94_PAD_GPIO_IO06__LPI2C7_SDA                     0x0028 0x032c 0x0754 0x06 0x00
+#define IMX94_PAD_GPIO_IO06__FLEXIO1_FLEXIO6                0x0028 0x032c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO07__GPIO2_IO7                      0x002c 0x0330 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO07__LPSPI3_PCS1                    0x002c 0x0330 0x0768 0x01 0x00
+#define IMX94_PAD_GPIO_IO07__XBAR1_XBAR_INOUT43             0x002c 0x0330 0x08e4 0x02 0x00
+#define IMX94_PAD_GPIO_IO07__GPT_MUX_INOUT3                 0x002c 0x0330 0x0704 0x03 0x00
+#define IMX94_PAD_GPIO_IO07__LPSPI7_SCK                     0x002c 0x0330 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO07__LPUART6_RTS_B                  0x002c 0x0330 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO07__LPI2C7_SCL                     0x002c 0x0330 0x0750 0x06 0x00
+#define IMX94_PAD_GPIO_IO07__FLEXIO1_FLEXIO7                0x002c 0x0330 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO08__GPIO2_IO8                      0x0030 0x0334 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO08__LPSPI3_PCS0                    0x0030 0x0334 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO08__USDHC2_WP                      0x0030 0x0334 0x0854 0x02 0x00
+#define IMX94_PAD_GPIO_IO08__GPT_MUX_INOUT2                 0x0030 0x0334 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO08__TPM6_CH0                       0x0030 0x0334 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO08__LPUART7_TX                     0x0030 0x0334 0x07d4 0x05 0x00
+#define IMX94_PAD_GPIO_IO08__LPI2C7_SDA                     0x0030 0x0334 0x0754 0x06 0x01
+#define IMX94_PAD_GPIO_IO08__FLEXIO1_FLEXIO8                0x0030 0x0334 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO09__GPIO2_IO9                      0x0034 0x0338 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO09__LPSPI3_SIN                     0x0034 0x0338 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO09__XBAR1_XBAR_INOUT44             0x0034 0x0338 0x08e8 0x02 0x00
+#define IMX94_PAD_GPIO_IO09__GPT_MUX_INOUT0                 0x0034 0x0338 0x06fc 0x03 0x00
+#define IMX94_PAD_GPIO_IO09__TPM3_EXTCLK                    0x0034 0x0338 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO09__LPUART7_RX                     0x0034 0x0338 0x07d0 0x05 0x00
+#define IMX94_PAD_GPIO_IO09__LPI2C7_SCL                     0x0034 0x0338 0x0750 0x06 0x01
+#define IMX94_PAD_GPIO_IO09__FLEXIO1_FLEXIO9                0x0034 0x0338 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO10__GPIO2_IO10                     0x0038 0x033c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO10__LPSPI3_SOUT                    0x0038 0x033c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO10__XBAR1_XBAR_INOUT45             0x0038 0x033c 0x08ec 0x02 0x00
+#define IMX94_PAD_GPIO_IO10__GPT_MUX_INOUT6                 0x0038 0x033c 0x0710 0x03 0x00
+#define IMX94_PAD_GPIO_IO10__TPM4_EXTCLK                    0x0038 0x033c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO10__LPUART7_CTS_B                  0x0038 0x033c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO10__LPI2C8_SDA                     0x0038 0x033c 0x075c 0x06 0x00
+#define IMX94_PAD_GPIO_IO10__FLEXIO1_FLEXIO10               0x0038 0x033c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO11__GPIO2_IO11                     0x003c 0x0340 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO11__LPSPI3_SCK                     0x003c 0x0340 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO11__XBAR1_XBAR_INOUT46             0x003c 0x0340 0x08f0 0x02 0x00
+#define IMX94_PAD_GPIO_IO11__GPT_MUX_INOUT9                 0x003c 0x0340 0x071c 0x03 0x00
+#define IMX94_PAD_GPIO_IO11__TPM5_EXTCLK                    0x003c 0x0340 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO11__LPUART7_RTS_B                  0x003c 0x0340 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO11__LPI2C8_SCL                     0x003c 0x0340 0x0758 0x06 0x00
+#define IMX94_PAD_GPIO_IO11__FLEXIO1_FLEXIO11               0x003c 0x0340 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO12__GPIO2_IO12                     0x0040 0x0344 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO12__TPM3_CH2                       0x0040 0x0344 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO12__PDM_BIT_STREAM2                0x0040 0x0344 0x0618 0x02 0x00
+#define IMX94_PAD_GPIO_IO12__FLEXIO1_FLEXIO12               0x0040 0x0344 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO12__LPSPI8_PCS0                    0x0040 0x0344 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO12__LPUART8_TX                     0x0040 0x0344 0x07dc 0x05 0x01
+#define IMX94_PAD_GPIO_IO12__LPI2C8_SDA                     0x0040 0x0344 0x075c 0x06 0x01
+
+#define IMX94_PAD_GPIO_IO13__GPIO2_IO13                     0x0044 0x0348 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO13__TPM4_CH2                       0x0044 0x0348 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO13__PDM_BIT_STREAM3                0x0044 0x0348 0x061c 0x02 0x00
+#define IMX94_PAD_GPIO_IO13__XBAR1_XBAR_INOUT47             0x0044 0x0348 0x08f4 0x03 0x00
+#define IMX94_PAD_GPIO_IO13__LPSPI8_SIN                     0x0044 0x0348 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO13__LPUART8_RX                     0x0044 0x0348 0x07d8 0x05 0x01
+#define IMX94_PAD_GPIO_IO13__LPI2C8_SCL                     0x0044 0x0348 0x0758 0x06 0x01
+#define IMX94_PAD_GPIO_IO13__FLEXIO1_FLEXIO13               0x0044 0x0348 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO14__GPIO2_IO14                     0x0048 0x034c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART10_CTS_B                 0x0048 0x034c 0x078c 0x01 0x00
+#define IMX94_PAD_GPIO_IO14__ECAT_SDA                       0x0048 0x034c 0x062c 0x02 0x00
+#define IMX94_PAD_GPIO_IO14__XBAR1_XBAR_INOUT48             0x0048 0x034c 0x08f8 0x03 0x00
+#define IMX94_PAD_GPIO_IO14__LPSPI8_SOUT                    0x0048 0x034c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART8_CTS_B                  0x0048 0x034c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO14__LPUART4_TX                     0x0048 0x034c 0x07b4 0x06 0x00
+#define IMX94_PAD_GPIO_IO14__FLEXIO1_FLEXIO14               0x0048 0x034c 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO15__GPIO2_IO15                     0x004c 0x0350 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART10_RTS_B                 0x004c 0x0350 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO15__ECAT_SCL                       0x004c 0x0350 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO15__XBAR1_XBAR_INOUT8              0x004c 0x0350 0x087c 0x03 0x00
+#define IMX94_PAD_GPIO_IO15__LPSPI8_SCK                     0x004c 0x0350 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART8_RTS_B                  0x004c 0x0350 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO15__LPUART4_RX                     0x004c 0x0350 0x07b0 0x06 0x00
+#define IMX94_PAD_GPIO_IO15__FLEXIO1_FLEXIO15               0x004c 0x0350 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO16__GPIO2_IO16                     0x0050 0x0354 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO16__LPI2C3_SDA                     0x0050 0x0354 0x0730 0x01 0x00
+#define IMX94_PAD_GPIO_IO16__CAN3_TX                        0x0050 0x0354 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO16__EWM_OUT_B                      0x0050 0x0354 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO16__LPUART11_TX                    0x0050 0x0354 0x079c 0x04 0x00
+#define IMX94_PAD_GPIO_IO16__GPT_MUX_INOUT0                 0x0050 0x0354 0x06fc 0x05 0x01
+#define IMX94_PAD_GPIO_IO16__FLEXPWM4_PWMA0                 0x0050 0x0354 0x06d4 0x06 0x00
+#define IMX94_PAD_GPIO_IO16__XBAR1_XBAR_INOUT30             0x0050 0x0354 0x08b0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO17__GPIO2_IO17                     0x0054 0x0358 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO17__LPI2C3_SCL                     0x0054 0x0358 0x072c 0x01 0x00
+#define IMX94_PAD_GPIO_IO17__CAN3_RX                        0x0054 0x0358 0x0680 0x02 0x00
+#define IMX94_PAD_GPIO_IO17__LPI2C6_HREQ                    0x0054 0x0358 0x0744 0x03 0x00
+#define IMX94_PAD_GPIO_IO17__LPUART11_RX                    0x0054 0x0358 0x0798 0x04 0x00
+#define IMX94_PAD_GPIO_IO17__GPT_MUX_INOUT3                 0x0054 0x0358 0x0704 0x05 0x01
+#define IMX94_PAD_GPIO_IO17__FLEXPWM4_PWMB0                 0x0054 0x0358 0x06e4 0x06 0x00
+#define IMX94_PAD_GPIO_IO17__XBAR1_XBAR_INOUT31             0x0054 0x0358 0x08b4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO18__GPIO2_IO18                     0x0058 0x035c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO18__LPI2C4_SDA                     0x0058 0x035c 0x0738 0x01 0x00
+#define IMX94_PAD_GPIO_IO18__LPUART10_TX                    0x0058 0x035c 0x0794 0x02 0x00
+#define IMX94_PAD_GPIO_IO18__LPI2C7_HREQ                    0x0058 0x035c 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO18__LPUART11_CTS_B                 0x0058 0x035c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO18__GPT_MUX_INOUT6                 0x0058 0x035c 0x0710 0x05 0x01
+#define IMX94_PAD_GPIO_IO18__FLEXPWM4_PWMA1                 0x0058 0x035c 0x06d8 0x06 0x00
+#define IMX94_PAD_GPIO_IO18__XBAR1_XBAR_INOUT32             0x0058 0x035c 0x08b8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO19__GPIO2_IO19                     0x005c 0x0360 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO19__LPI2C4_SCL                     0x005c 0x0360 0x0734 0x01 0x00
+#define IMX94_PAD_GPIO_IO19__LPUART10_RX                    0x005c 0x0360 0x0790 0x02 0x00
+#define IMX94_PAD_GPIO_IO19__LPI2C8_HREQ                    0x005c 0x0360 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO19__LPUART11_RTS_B                 0x005c 0x0360 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO19__GPT_MUX_INOUT9                 0x005c 0x0360 0x071c 0x05 0x01
+#define IMX94_PAD_GPIO_IO19__FLEXPWM4_PWMB1                 0x005c 0x0360 0x06e8 0x06 0x00
+#define IMX94_PAD_GPIO_IO19__XBAR1_XBAR_INOUT33             0x005c 0x0360 0x08bc 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO20__GPIO2_IO20                     0x0060 0x0364 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B                 0x0060 0x0364 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO20__LPUART6_TX                     0x0060 0x0364 0x07cc 0x02 0x01
+#define IMX94_PAD_GPIO_IO20__LPI2C8_SDA                     0x0060 0x0364 0x075c 0x03 0x02
+#define IMX94_PAD_GPIO_IO20__LPSPI4_PCS2                    0x0060 0x0364 0x076c 0x04 0x00
+#define IMX94_PAD_GPIO_IO20__LPSPI3_PCS1                    0x0060 0x0364 0x0768 0x05 0x01
+#define IMX94_PAD_GPIO_IO20__FLEXPWM4_PWMA2                 0x0060 0x0364 0x06dc 0x06 0x00
+#define IMX94_PAD_GPIO_IO20__XBAR1_XBAR_INOUT34             0x0060 0x0364 0x08c0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO21__GPIO2_IO21                     0x0064 0x0368 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO21__SAI2_TX_BCLK                   0x0064 0x0368 0x07f8 0x01 0x00
+#define IMX94_PAD_GPIO_IO21__LPUART6_RX                     0x0064 0x0368 0x07c8 0x02 0x01
+#define IMX94_PAD_GPIO_IO21__LPI2C8_SCL                     0x0064 0x0368 0x0758 0x03 0x02
+#define IMX94_PAD_GPIO_IO21__LPSPI4_PCS1                    0x0064 0x0368 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO21__LPI2C3_HREQ                    0x0064 0x0368 0x0728 0x05 0x00
+#define IMX94_PAD_GPIO_IO21__FLEXPWM4_PWMB2                 0x0064 0x0368 0x06ec 0x06 0x00
+#define IMX94_PAD_GPIO_IO21__XBAR1_XBAR_INOUT35             0x0064 0x0368 0x08c4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO22__GPIO2_IO22                     0x0068 0x036c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO22__SAI2_MCLK                      0x0068 0x036c 0x07e8 0x01 0x00
+#define IMX94_PAD_GPIO_IO22__LPUART6_CTS_B                  0x0068 0x036c 0x07c4 0x02 0x01
+#define IMX94_PAD_GPIO_IO22__XBAR1_XBAR_INOUT9              0x0068 0x036c 0x0880 0x03 0x00
+#define IMX94_PAD_GPIO_IO22__LPSPI4_PCS0                    0x0068 0x036c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO22__FLEXPWM3_PWMA3                 0x0068 0x036c 0x06b4 0x05 0x00
+#define IMX94_PAD_GPIO_IO22__FLEXPWM4_PWMA3                 0x0068 0x036c 0x06e0 0x06 0x00
+#define IMX94_PAD_GPIO_IO22__SINC4_EMCLK0                   0x0068 0x036c 0x082c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO23__GPIO2_IO23                     0x006c 0x0370 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B                 0x006c 0x0370 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO23__LPUART6_RTS_B                  0x006c 0x0370 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO23__XBAR1_XBAR_INOUT10             0x006c 0x0370 0x0884 0x03 0x00
+#define IMX94_PAD_GPIO_IO23__LPSPI4_SIN                     0x006c 0x0370 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO23__FLEXPWM3_PWMB3                 0x006c 0x0370 0x06c4 0x05 0x00
+#define IMX94_PAD_GPIO_IO23__FLEXPWM4_PWMB3                 0x006c 0x0370 0x06f0 0x06 0x00
+#define IMX94_PAD_GPIO_IO23__SINC4_EMBIT0                   0x006c 0x0370 0x0820 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO24__GPIO2_IO24                     0x0070 0x0374 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO24__SAI2_RX_BCLK                   0x0070 0x0374 0x07ec 0x01 0x00
+#define IMX94_PAD_GPIO_IO24__LPUART11_TX                    0x0070 0x0374 0x079c 0x02 0x01
+#define IMX94_PAD_GPIO_IO24__LPI2C3_HREQ                    0x0070 0x0374 0x0728 0x03 0x01
+#define IMX94_PAD_GPIO_IO24__LPSPI4_SOUT                    0x0070 0x0374 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO24__SINC_FILTER_GLUE2_BREAK        0x0070 0x0374 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO24__FLEXPWM4_PWMX0                 0x0070 0x0374 0x06f4 0x06 0x00
+#define IMX94_PAD_GPIO_IO24__XBAR1_XBAR_INOUT36             0x0070 0x0374 0x08c8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO25__GPIO2_IO25                     0x0074 0x0378 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO25__SAI2_RX_SYNC                   0x0074 0x0378 0x07f4 0x01 0x00
+#define IMX94_PAD_GPIO_IO25__LPUART11_RX                    0x0074 0x0378 0x0798 0x02 0x01
+#define IMX94_PAD_GPIO_IO25__LPI2C4_HREQ                    0x0074 0x0378 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO25__LPSPI4_SCK                     0x0074 0x0378 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO25__SINC_FILTER_GLUE1_BREAK        0x0074 0x0378 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO25__FLEXPWM4_PWMX1                 0x0074 0x0378 0x06f8 0x06 0x00
+#define IMX94_PAD_GPIO_IO25__XBAR1_XBAR_INOUT37             0x0074 0x0378 0x08cc 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO26__GPIO2_IO26                     0x0078 0x037c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO26__LPI2C5_SCL                     0x0078 0x037c 0x073c 0x01 0x01
+#define IMX94_PAD_GPIO_IO26__LPUART12_TX                    0x0078 0x037c 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO26__GPT_MUX_INOUT4                 0x0078 0x037c 0x0708 0x03 0x01
+#define IMX94_PAD_GPIO_IO26__FLEXIO1_3_1_FLEXIO0            0x0078 0x037c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO26__SAI2_RX_DATA0                  0x0078 0x037c 0x07f0 0x05 0x00
+#define IMX94_PAD_GPIO_IO26__FLEXPWM4_PWMX2                 0x0078 0x037c 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO26__XBAR1_XBAR_INOUT38             0x0078 0x037c 0x08d0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO27__GPIO2_IO27                     0x007c 0x0380 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO27__LPI2C5_SDA                     0x007c 0x0380 0x0740 0x01 0x01
+#define IMX94_PAD_GPIO_IO27__LPUART12_RX                    0x007c 0x0380 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO27__GPT_MUX_INOUT5                 0x007c 0x0380 0x070c 0x03 0x01
+#define IMX94_PAD_GPIO_IO27__FLEXIO1_3_1_FLEXIO1            0x007c 0x0380 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO27__SAI2_TX_DATA0                  0x007c 0x0380 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO27__FLEXPWM4_PWMX3                 0x007c 0x0380 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO27__SINC4_MOD_CLK0                 0x007c 0x0380 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO28__GPIO2_IO28                     0x0080 0x0384 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO28__LPI2C6_SCL                     0x0080 0x0384 0x0748 0x01 0x02
+#define IMX94_PAD_GPIO_IO28__LPUART12_CTS_B                 0x0080 0x0384 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO28__GPT_MUX_INOUT7                 0x0080 0x0384 0x0714 0x03 0x01
+#define IMX94_PAD_GPIO_IO28__FLEXIO1_3_1_FLEXIO2            0x0080 0x0384 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO28__SAI2_TX_SYNC                   0x0080 0x0384 0x07fc 0x05 0x00
+#define IMX94_PAD_GPIO_IO28__FLEXPWM1_PWMX2                 0x0080 0x0384 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO28__XBAR1_XBAR_INOUT4              0x0080 0x0384 0x086c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO29__GPIO2_IO29                     0x0084 0x0388 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO29__LPI2C6_SDA                     0x0084 0x0388 0x074c 0x01 0x02
+#define IMX94_PAD_GPIO_IO29__LPUART12_RTS_B                 0x0084 0x0388 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO29__I3C2_SDA                       0x0084 0x0388 0x0724 0x03 0x01
+#define IMX94_PAD_GPIO_IO29__FLEXIO1_3_1_FLEXIO3            0x0084 0x0388 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO29__FLEXPWM3_PWMX0                 0x0084 0x0388 0x06c8 0x05 0x00
+#define IMX94_PAD_GPIO_IO29__FLEXPWM1_PWMX3                 0x0084 0x0388 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO29__XBAR1_XBAR_INOUT5              0x0084 0x0388 0x0870 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO30__GPIO2_IO30                     0x0088 0x038c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO30__LPIT2_TRIGGER0                 0x0088 0x038c 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO30__LPUART3_TX                     0x0088 0x038c 0x07a8 0x02 0x00
+#define IMX94_PAD_GPIO_IO30__I3C2_PUR                       0x0088 0x038c 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO30__FLEXIO1_3_1_FLEXIO4            0x0088 0x038c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO30__I3C2_PUR_B                     0x0088 0x038c 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO30__FLEXPWM2_PWMX2                 0x0088 0x038c 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO30__XBAR1_XBAR_INOUT6              0x0088 0x038c 0x0874 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO31__GPIO2_IO31                     0x008c 0x0390 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO31__LPIT2_TRIGGER1                 0x008c 0x0390 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO31__LPUART3_RX                     0x008c 0x0390 0x07a4 0x02 0x00
+#define IMX94_PAD_GPIO_IO31__I3C2_SCL                       0x008c 0x0390 0x0720 0x03 0x01
+#define IMX94_PAD_GPIO_IO31__FLEXIO1_3_1_FLEXIO5            0x008c 0x0390 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO31__FLEXPWM3_PWMX1                 0x008c 0x0390 0x06cc 0x05 0x00
+#define IMX94_PAD_GPIO_IO31__FLEXPWM2_PWMX3                 0x008c 0x0390 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO31__XBAR1_XBAR_INOUT7              0x008c 0x0390 0x0878 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO32__GPIO3_IO0                      0x0090 0x0394 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO32__LPIT3_TRIGGER0                 0x0090 0x0394 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO32__LPUART7_TX                     0x0090 0x0394 0x07d4 0x02 0x01
+#define IMX94_PAD_GPIO_IO32__GPT_MUX_INOUT8                 0x0090 0x0394 0x0718 0x03 0x01
+#define IMX94_PAD_GPIO_IO32__FLEXIO1_3_1_FLEXIO6            0x0090 0x0394 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO32__FLEXPWM3_PWMA0                 0x0090 0x0394 0x06a8 0x05 0x00
+#define IMX94_PAD_GPIO_IO32__SINC_FILTER_GLUE2_BREAK        0x0090 0x0394 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO32__XBAR1_XBAR_INOUT8              0x0090 0x0394 0x087c 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO33__GPIO3_IO1                      0x0094 0x0398 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO33__LPIT3_TRIGGER1                 0x0094 0x0398 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO33__LPUART7_RX                     0x0094 0x0398 0x07d0 0x02 0x01
+#define IMX94_PAD_GPIO_IO33__GPT_MUX_INOUT1                 0x0094 0x0398 0x0700 0x03 0x01
+#define IMX94_PAD_GPIO_IO33__FLEXIO1_3_1_FLEXIO7            0x0094 0x0398 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO33__FLEXPWM3_PWMB0                 0x0094 0x0398 0x06b8 0x05 0x00
+#define IMX94_PAD_GPIO_IO33__SINC_FILTER_GLUE1_BREAK        0x0094 0x0398 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO33__XBAR1_XBAR_INOUT9              0x0094 0x0398 0x0880 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO34__GPIO3_IO2                      0x0098 0x039c 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO34__LPI2C7_SDA                     0x0098 0x039c 0x0754 0x01 0x02
+#define IMX94_PAD_GPIO_IO34__CAN2_TX                        0x0098 0x039c 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO34__ECAT_SDA                       0x0098 0x039c 0x062c 0x03 0x01
+#define IMX94_PAD_GPIO_IO34__FLEXIO1_3_1_FLEXIO8            0x0098 0x039c 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO34__FLEXPWM3_PWMA1                 0x0098 0x039c 0x06ac 0x05 0x00
+#define IMX94_PAD_GPIO_IO34__FLEXPWM1_PWMX0                 0x0098 0x039c 0x0698 0x06 0x00
+#define IMX94_PAD_GPIO_IO34__XBAR1_XBAR_INOUT10             0x0098 0x039c 0x0884 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO35__GPIO3_IO3                      0x009c 0x03a0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO35__LPI2C7_SCL                     0x009c 0x03a0 0x0750 0x01 0x02
+#define IMX94_PAD_GPIO_IO35__CAN2_RX                        0x009c 0x03a0 0x067c 0x02 0x01
+#define IMX94_PAD_GPIO_IO35__ECAT_SCL                       0x009c 0x03a0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXIO1_3_1_FLEXIO9            0x009c 0x03a0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXPWM3_PWMB1                 0x009c 0x03a0 0x06bc 0x05 0x00
+#define IMX94_PAD_GPIO_IO35__FLEXPWM1_PWMX1                 0x009c 0x03a0 0x069c 0x06 0x00
+#define IMX94_PAD_GPIO_IO35__XBAR1_XBAR_INOUT11             0x009c 0x03a0 0x0888 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO36__USDHC2_WP                      0x00a0 0x03a4 0x0854 0x03 0x01
+#define IMX94_PAD_GPIO_IO36__FLEXIO1_3_1_FLEXIO10           0x00a0 0x03a4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO36__FLEXPWM3_PWMA2                 0x00a0 0x03a4 0x06b0 0x05 0x00
+#define IMX94_PAD_GPIO_IO36__FLEXPWM2_PWMX0                 0x00a0 0x03a4 0x06a0 0x06 0x00
+#define IMX94_PAD_GPIO_IO36__XBAR1_XBAR_INOUT12             0x00a0 0x03a4 0x088c 0x07 0x00
+#define IMX94_PAD_GPIO_IO36__GPIO3_IO4                      0x00a0 0x03a4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO36__LPI2C8_SDA                     0x00a0 0x03a4 0x075c 0x01 0x03
+#define IMX94_PAD_GPIO_IO36__CAN4_TX                        0x00a0 0x03a4 0x0000 0x02 0x00
+
+#define IMX94_PAD_GPIO_IO37__GPIO3_IO5                      0x00a4 0x03a8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO37__LPI2C8_SCL                     0x00a4 0x03a8 0x0758 0x01 0x03
+#define IMX94_PAD_GPIO_IO37__CAN4_RX                        0x00a4 0x03a8 0x0684 0x02 0x00
+#define IMX94_PAD_GPIO_IO37__LPI2C5_HREQ                    0x00a4 0x03a8 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXIO1_3_1_FLEXIO11           0x00a4 0x03a8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXPWM3_PWMB2                 0x00a4 0x03a8 0x06c0 0x05 0x00
+#define IMX94_PAD_GPIO_IO37__FLEXPWM2_PWMX1                 0x00a4 0x03a8 0x06a4 0x06 0x00
+#define IMX94_PAD_GPIO_IO37__XBAR1_XBAR_INOUT13             0x00a4 0x03a8 0x0890 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO38__GPIO3_IO6                      0x00a8 0x03ac 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO38__NETC_1588MUX_INOUT0            0x00a8 0x03ac 0x064c 0x01 0x00
+#define IMX94_PAD_GPIO_IO38__LPI2C3_SDA                     0x00a8 0x03ac 0x0730 0x02 0x01
+#define IMX94_PAD_GPIO_IO38__LPIT3_TRIGGER2                 0x00a8 0x03ac 0x0764 0x03 0x00
+#define IMX94_PAD_GPIO_IO38__FLEXIO1_3_1_FLEXIO12           0x00a8 0x03ac 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO38__LPUART3_CTS_B                  0x00a8 0x03ac 0x07a0 0x05 0x00
+#define IMX94_PAD_GPIO_IO38__FLEXPWM3_PWMX0                 0x00a8 0x03ac 0x06c8 0x06 0x01
+#define IMX94_PAD_GPIO_IO38__XBAR1_XBAR_INOUT14             0x00a8 0x03ac 0x0894 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO39__GPIO3_IO7                      0x00ac 0x03b0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO39__NETC_1588MUX_INOUT1            0x00ac 0x03b0 0x0650 0x01 0x00
+#define IMX94_PAD_GPIO_IO39__LPI2C3_SCL                     0x00ac 0x03b0 0x072c 0x02 0x01
+#define IMX94_PAD_GPIO_IO39__LPIT2_TRIGGER2                 0x00ac 0x03b0 0x0760 0x03 0x00
+#define IMX94_PAD_GPIO_IO39__FLEXIO1_3_1_FLEXIO13           0x00ac 0x03b0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO39__LPUART3_RTS_B                  0x00ac 0x03b0 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO39__FLEXPWM3_PWMX1                 0x00ac 0x03b0 0x06cc 0x06 0x01
+#define IMX94_PAD_GPIO_IO39__XBAR1_XBAR_INOUT15             0x00ac 0x03b0 0x0898 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO40__GPIO3_IO8                      0x00b0 0x03b4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO40__NETC_1588MUX_INOUT2            0x00b0 0x03b4 0x0654 0x01 0x00
+#define IMX94_PAD_GPIO_IO40__LPI2C7_SDA                     0x00b0 0x03b4 0x0754 0x02 0x03
+#define IMX94_PAD_GPIO_IO40__LPUART4_TX                     0x00b0 0x03b4 0x07b4 0x03 0x01
+#define IMX94_PAD_GPIO_IO40__FLEXIO1_3_1_FLEXIO14           0x00b0 0x03b4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO40__FLEXPWM3_PWMX2                 0x00b0 0x03b4 0x06d0 0x05 0x00
+#define IMX94_PAD_GPIO_IO40__FLEXPWM4_PWMX0                 0x00b0 0x03b4 0x06f4 0x06 0x01
+#define IMX94_PAD_GPIO_IO40__XBAR1_XBAR_INOUT16             0x00b0 0x03b4 0x089c 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO41__GPIO3_IO9                      0x00b4 0x03b8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO41__NETC_1588MUX_INOUT3            0x00b4 0x03b8 0x0658 0x01 0x00
+#define IMX94_PAD_GPIO_IO41__LPI2C7_SCL                     0x00b4 0x03b8 0x0750 0x02 0x03
+#define IMX94_PAD_GPIO_IO41__LPUART4_RX                     0x00b4 0x03b8 0x07b0 0x03 0x01
+#define IMX94_PAD_GPIO_IO41__FLEXIO1_3_1_FLEXIO15           0x00b4 0x03b8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO41__LPI2C6_HREQ                    0x00b4 0x03b8 0x0744 0x05 0x01
+#define IMX94_PAD_GPIO_IO41__FLEXPWM4_PWMX1                 0x00b4 0x03b8 0x06f8 0x06 0x01
+#define IMX94_PAD_GPIO_IO41__XBAR1_XBAR_INOUT17             0x00b4 0x03b8 0x08a0 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO42__GPIO3_IO10                     0x00b8 0x03bc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO42__SAI3_TX_BCLK                   0x00b8 0x03bc 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO42__PDM_BIT_STREAM2                0x00b8 0x03bc 0x0618 0x02 0x01
+#define IMX94_PAD_GPIO_IO42__XBAR1_XBAR_INOUT11             0x00b8 0x03bc 0x0888 0x03 0x01
+#define IMX94_PAD_GPIO_IO42__LPUART3_TX                     0x00b8 0x03bc 0x07a8 0x04 0x01
+#define IMX94_PAD_GPIO_IO42__LPSPI4_PCS2                    0x00b8 0x03bc 0x076c 0x05 0x01
+#define IMX94_PAD_GPIO_IO42__LPUART4_CTS_B                  0x00b8 0x03bc 0x07ac 0x06 0x00
+#define IMX94_PAD_GPIO_IO42__SINC4_EMCLK1                   0x00b8 0x03bc 0x0830 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO43__GPIO3_IO11                     0x00bc 0x03c0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO43__SAI3_MCLK                      0x00bc 0x03c0 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO43__XBAR1_XBAR_INOUT12             0x00bc 0x03c0 0x088c 0x03 0x01
+#define IMX94_PAD_GPIO_IO43__LPUART3_RX                     0x00bc 0x03c0 0x07a4 0x04 0x01
+#define IMX94_PAD_GPIO_IO43__LPSPI3_PCS1                    0x00bc 0x03c0 0x0768 0x05 0x02
+#define IMX94_PAD_GPIO_IO43__LPUART4_RTS_B                  0x00bc 0x03c0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO43__SINC4_EMBIT1                   0x00bc 0x03c0 0x0824 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO44__GPIO3_IO12                     0x00c0 0x03c4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO44__SAI3_RX_BCLK                   0x00c0 0x03c4 0x0800 0x01 0x00
+#define IMX94_PAD_GPIO_IO44__PDM_BIT_STREAM1                0x00c0 0x03c4 0x0614 0x02 0x01
+#define IMX94_PAD_GPIO_IO44__LPUART9_TX                     0x00c0 0x03c4 0x07e4 0x03 0x00
+#define IMX94_PAD_GPIO_IO44__LPSPI5_PCS0                    0x00c0 0x03c4 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO44__LPI2C3_SDA                     0x00c0 0x03c4 0x0730 0x05 0x02
+#define IMX94_PAD_GPIO_IO44__TPM5_CH2                       0x00c0 0x03c4 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO44__SINC_FILTER_GLUE4_BREAK        0x00c0 0x03c4 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO45__GPIO3_IO13                     0x00c4 0x03c8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO45__SAI3_RX_SYNC                   0x00c4 0x03c8 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO45__PDM_BIT_STREAM3                0x00c4 0x03c8 0x061c 0x02 0x01
+#define IMX94_PAD_GPIO_IO45__LPUART9_RX                     0x00c4 0x03c8 0x07e0 0x03 0x00
+#define IMX94_PAD_GPIO_IO45__LPSPI5_SIN                     0x00c4 0x03c8 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO45__LPI2C3_SCL                     0x00c4 0x03c8 0x072c 0x05 0x02
+#define IMX94_PAD_GPIO_IO45__TPM6_CH2                       0x00c4 0x03c8 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO45__SAI3_TX_DATA0                  0x00c4 0x03c8 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO46__GPIO3_IO14                     0x00c8 0x03cc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO46__SAI3_RX_DATA0                  0x00c8 0x03cc 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO46__PDM_BIT_STREAM0                0x00c8 0x03cc 0x0610 0x02 0x01
+#define IMX94_PAD_GPIO_IO46__LPUART9_CTS_B                  0x00c8 0x03cc 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO46__LPSPI5_SOUT                    0x00c8 0x03cc 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO46__LPI2C4_SDA                     0x00c8 0x03cc 0x0738 0x05 0x01
+#define IMX94_PAD_GPIO_IO46__TPM3_CH1                       0x00c8 0x03cc 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO46__EWM_OUT_B                      0x00c8 0x03cc 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO47__GPIO3_IO15                     0x00cc 0x03d0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO47__SAI3_TX_DATA0                  0x00cc 0x03d0 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO47__PDM_CLK                        0x00cc 0x03d0 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO47__LPUART9_RTS_B                  0x00cc 0x03d0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO47__LPSPI5_SCK                     0x00cc 0x03d0 0x0000 0x04 0x00
+#define IMX94_PAD_GPIO_IO47__LPI2C4_SCL                     0x00cc 0x03d0 0x0734 0x05 0x01
+#define IMX94_PAD_GPIO_IO47__TPM4_CH1                       0x00cc 0x03d0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO47__SAI3_RX_BCLK                   0x00cc 0x03d0 0x0800 0x07 0x01
+
+#define IMX94_PAD_GPIO_IO48__GPIO3_IO16                     0x00d0 0x03d4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO48__USDHC3_CLK                     0x00d0 0x03d4 0x0000 0x01 0x00
+#define IMX94_PAD_GPIO_IO48__CAN5_TX                        0x00d0 0x03d4 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO48__LPUART10_TX                    0x00d0 0x03d4 0x0794 0x03 0x01
+#define IMX94_PAD_GPIO_IO48__TPM5_CH1                       0x00d0 0x03d4 0x0840 0x04 0x00
+#define IMX94_PAD_GPIO_IO48__TPM6_EXTCLK                    0x00d0 0x03d4 0x0850 0x05 0x00
+#define IMX94_PAD_GPIO_IO48__LPI2C5_SDA                     0x00d0 0x03d4 0x0740 0x06 0x02
+#define IMX94_PAD_GPIO_IO48__SINC4_EMCLK2                   0x00d0 0x03d4 0x0834 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO49__GPIO3_IO17                     0x00d4 0x03d8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO49__USDHC3_CMD                     0x00d4 0x03d8 0x0858 0x01 0x00
+#define IMX94_PAD_GPIO_IO49__CAN5_RX                        0x00d4 0x03d8 0x0688 0x02 0x01
+#define IMX94_PAD_GPIO_IO49__LPUART10_RX                    0x00d4 0x03d8 0x0790 0x03 0x01
+#define IMX94_PAD_GPIO_IO49__TPM6_CH1                       0x00d4 0x03d8 0x0848 0x04 0x00
+#define IMX94_PAD_GPIO_IO49__XBAR1_XBAR_INOUT13             0x00d4 0x03d8 0x0890 0x05 0x01
+#define IMX94_PAD_GPIO_IO49__LPI2C5_SCL                     0x00d4 0x03d8 0x073c 0x06 0x02
+#define IMX94_PAD_GPIO_IO49__SINC4_EMBIT2                   0x00d4 0x03d8 0x0828 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO50__GPIO3_IO18                     0x00d8 0x03dc 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO50__USDHC3_DATA0                   0x00d8 0x03dc 0x085c 0x01 0x00
+#define IMX94_PAD_GPIO_IO50__XBAR1_XBAR_INOUT14             0x00d8 0x03dc 0x0894 0x02 0x01
+#define IMX94_PAD_GPIO_IO50__LPUART10_CTS_B                 0x00d8 0x03dc 0x078c 0x03 0x01
+#define IMX94_PAD_GPIO_IO50__TPM3_CH3                       0x00d8 0x03dc 0x0838 0x04 0x00
+#define IMX94_PAD_GPIO_IO50__JTAG_MUX_TDO                   0x00d8 0x03dc 0x0000 0x05 0x00
+#define IMX94_PAD_GPIO_IO50__LPSPI6_PCS1                    0x00d8 0x03dc 0x0774 0x06 0x00
+#define IMX94_PAD_GPIO_IO50__SINC4_EMCLK3                   0x00d8 0x03dc 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO51__GPIO3_IO19                     0x00dc 0x03e0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO51__USDHC3_DATA1                   0x00dc 0x03e0 0x0860 0x01 0x00
+#define IMX94_PAD_GPIO_IO51__CAN2_TX                        0x00dc 0x03e0 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO51__LPUART10_RTS_B                 0x00dc 0x03e0 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO51__TPM4_CH3                       0x00dc 0x03e0 0x083c 0x04 0x00
+#define IMX94_PAD_GPIO_IO51__JTAG_MUX_TCK                   0x00dc 0x03e0 0x0928 0x05 0x01
+#define IMX94_PAD_GPIO_IO51__LPSPI7_PCS1                    0x00dc 0x03e0 0x0778 0x06 0x00
+#define IMX94_PAD_GPIO_IO51__SINC4_EMBIT3                   0x00dc 0x03e0 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO52__GPIO3_IO20                     0x00e0 0x03e4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO52__USDHC3_DATA2                   0x00e0 0x03e4 0x0864 0x01 0x00
+#define IMX94_PAD_GPIO_IO52__PDM_BIT_STREAM1                0x00e0 0x03e4 0x0614 0x02 0x02
+#define IMX94_PAD_GPIO_IO52__LPSPI4_PCS2                    0x00e0 0x03e4 0x076c 0x03 0x02
+#define IMX94_PAD_GPIO_IO52__TPM5_CH3                       0x00e0 0x03e4 0x0844 0x04 0x00
+#define IMX94_PAD_GPIO_IO52__JTAG_MUX_TDI                   0x00e0 0x03e4 0x092c 0x05 0x01
+#define IMX94_PAD_GPIO_IO52__LPSPI8_PCS1                    0x00e0 0x03e4 0x077c 0x06 0x00
+#define IMX94_PAD_GPIO_IO52__SAI3_TX_SYNC                   0x00e0 0x03e4 0x0804 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO53__GPIO3_IO21                     0x00e4 0x03e8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO53__USDHC3_DATA3                   0x00e4 0x03e8 0x0868 0x01 0x00
+#define IMX94_PAD_GPIO_IO53__CAN2_RX                        0x00e4 0x03e8 0x067c 0x02 0x02
+#define IMX94_PAD_GPIO_IO53__LPSPI3_PCS1                    0x00e4 0x03e8 0x0768 0x03 0x03
+#define IMX94_PAD_GPIO_IO53__TPM6_CH3                       0x00e4 0x03e8 0x084c 0x04 0x00
+#define IMX94_PAD_GPIO_IO53__JTAG_MUX_TMS                   0x00e4 0x03e8 0x0930 0x05 0x01
+#define IMX94_PAD_GPIO_IO53__LPSPI5_PCS1                    0x00e4 0x03e8 0x0770 0x06 0x00
+#define IMX94_PAD_GPIO_IO53__SINC4_MOD_CLK1                 0x00e4 0x03e8 0x0000 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO54__GPIO3_IO22                     0x00e8 0x03ec 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO54__NETC_1588MUX_INOUT4            0x00e8 0x03ec 0x065c 0x01 0x00
+#define IMX94_PAD_GPIO_IO54__CAN4_TX                        0x00e8 0x03ec 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO54__LPIT3_TRIGGER2                 0x00e8 0x03ec 0x0764 0x03 0x01
+#define IMX94_PAD_GPIO_IO54__LPSPI6_PCS1                    0x00e8 0x03ec 0x0774 0x04 0x01
+#define IMX94_PAD_GPIO_IO54__TPM3_CH3                       0x00e8 0x03ec 0x0838 0x05 0x01
+#define IMX94_PAD_GPIO_IO54__SINC3_EMCLK0                   0x00e8 0x03ec 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO54__XBAR1_XBAR_INOUT18             0x00e8 0x03ec 0x08a4 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO55__GPIO3_IO23                     0x00ec 0x03f0 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO55__NETC_1588MUX_INOUT5            0x00ec 0x03f0 0x0660 0x01 0x00
+#define IMX94_PAD_GPIO_IO55__CAN4_RX                        0x00ec 0x03f0 0x0684 0x02 0x01
+#define IMX94_PAD_GPIO_IO55__LPIT2_TRIGGER2                 0x00ec 0x03f0 0x0760 0x03 0x01
+#define IMX94_PAD_GPIO_IO55__LPSPI7_PCS1                    0x00ec 0x03f0 0x0778 0x04 0x01
+#define IMX94_PAD_GPIO_IO55__TPM4_CH3                       0x00ec 0x03f0 0x083c 0x05 0x01
+#define IMX94_PAD_GPIO_IO55__SINC3_EMBIT0                   0x00ec 0x03f0 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO55__XBAR1_XBAR_INOUT19             0x00ec 0x03f0 0x08a8 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO56__GPIO3_IO24                     0x00f0 0x03f4 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO56__NETC_1588MUX_INOUT6            0x00f0 0x03f4 0x0664 0x01 0x00
+#define IMX94_PAD_GPIO_IO56__CAN5_TX                        0x00f0 0x03f4 0x0000 0x02 0x00
+#define IMX94_PAD_GPIO_IO56__LPIT3_TRIGGER3                 0x00f0 0x03f4 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO56__LPSPI8_PCS1                    0x00f0 0x03f4 0x077c 0x04 0x01
+#define IMX94_PAD_GPIO_IO56__SAI3_TX_SYNC                   0x00f0 0x03f4 0x0804 0x05 0x01
+#define IMX94_PAD_GPIO_IO56__SINC3_EMCLK1                   0x00f0 0x03f4 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO56__XBAR1_XBAR_INOUT20             0x00f0 0x03f4 0x08ac 0x07 0x00
+
+#define IMX94_PAD_GPIO_IO57__GPIO3_IO25                     0x00f4 0x03f8 0x0000 0x00 0x00
+#define IMX94_PAD_GPIO_IO57__NETC_1588MUX_INOUT7            0x00f4 0x03f8 0x0668 0x01 0x00
+#define IMX94_PAD_GPIO_IO57__CAN5_RX                        0x00f4 0x03f8 0x0688 0x02 0x02
+#define IMX94_PAD_GPIO_IO57__LPIT2_TRIGGER3                 0x00f4 0x03f8 0x0000 0x03 0x00
+#define IMX94_PAD_GPIO_IO57__LPSPI5_PCS1                    0x00f4 0x03f8 0x0770 0x04 0x01
+#define IMX94_PAD_GPIO_IO57__TPM6_CH3                       0x00f4 0x03f8 0x084c 0x05 0x01
+#define IMX94_PAD_GPIO_IO57__SINC3_EMBIT1                   0x00f4 0x03f8 0x0000 0x06 0x00
+#define IMX94_PAD_GPIO_IO57__ENET_REF_CLK_ROOT              0x00f4 0x03f8 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO1__CLKO_1                         0x00f8 0x03fc 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO1__NETC_1588MUX_INOUT8            0x00f8 0x03fc 0x066c 0x01 0x00
+#define IMX94_PAD_CCM_CLKO1__LPUART9_TX                     0x00f8 0x03fc 0x07e4 0x02 0x01
+#define IMX94_PAD_CCM_CLKO1__ECAT_LED_RUN                   0x00f8 0x03fc 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO1__TPM6_EXTCLK                    0x00f8 0x03fc 0x0850 0x04 0x01
+#define IMX94_PAD_CCM_CLKO1__GPIO4_IO0                      0x00f8 0x03fc 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO1__SINC3_EMCLK2                   0x00f8 0x03fc 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO1__XBAR1_XBAR_INOUT22             0x00f8 0x03fc 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO2__CLKO_2                         0x00fc 0x0400 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO2__NETC_1588MUX_INOUT9            0x00fc 0x0400 0x0670 0x01 0x00
+#define IMX94_PAD_CCM_CLKO2__LPUART9_RX                     0x00fc 0x0400 0x07e0 0x02 0x01
+#define IMX94_PAD_CCM_CLKO2__ECAT_LED_ERR                   0x00fc 0x0400 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO2__TPM5_CH1                       0x00fc 0x0400 0x0840 0x04 0x01
+#define IMX94_PAD_CCM_CLKO2__GPIO4_IO1                      0x00fc 0x0400 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO2__SINC3_EMBIT2                   0x00fc 0x0400 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO2__XBAR1_XBAR_INOUT23             0x00fc 0x0400 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO3__CLKO_3                         0x0100 0x0404 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO3__NETC_1588MUX_INOUT10           0x0100 0x0404 0x0674 0x01 0x00
+#define IMX94_PAD_CCM_CLKO3__CAN3_TX                        0x0100 0x0404 0x0000 0x02 0x00
+#define IMX94_PAD_CCM_CLKO3__ECAT_LED_STATE_RUN             0x0100 0x0404 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO3__TPM6_CH1                       0x0100 0x0404 0x0848 0x04 0x01
+#define IMX94_PAD_CCM_CLKO3__GPIO4_IO2                      0x0100 0x0404 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO3__SINC3_EMCLK3                   0x0100 0x0404 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO3__ENET_REF_CLK_ROOT              0x0100 0x0404 0x0000 0x07 0x00
+
+#define IMX94_PAD_CCM_CLKO4__CLKO_4                         0x0104 0x0408 0x0000 0x00 0x00
+#define IMX94_PAD_CCM_CLKO4__NETC_1588MUX_INOUT11           0x0104 0x0408 0x0000 0x01 0x00
+#define IMX94_PAD_CCM_CLKO4__CAN3_RX                        0x0104 0x0408 0x0680 0x02 0x01
+#define IMX94_PAD_CCM_CLKO4__ECAT_RESET_OUT                 0x0104 0x0408 0x0000 0x03 0x00
+#define IMX94_PAD_CCM_CLKO4__TPM5_CH3                       0x0104 0x0408 0x0844 0x04 0x01
+#define IMX94_PAD_CCM_CLKO4__GPIO4_IO3                      0x0104 0x0408 0x0000 0x05 0x00
+#define IMX94_PAD_CCM_CLKO4__SINC3_EMBIT3                   0x0104 0x0408 0x0000 0x06 0x00
+#define IMX94_PAD_CCM_CLKO4__XBAR1_XBAR_INOUT25             0x0104 0x0408 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH2_MDC_GPIO1__NETC_EMDC                 0x0108 0x040c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__NETC_ETH2_SLV_MDC         0x0108 0x040c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__I3C2_SCL                  0x0108 0x040c 0x0720 0x02 0x02
+#define IMX94_PAD_ETH2_MDC_GPIO1__USB1_OTG_ID               0x0108 0x040c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__FLEXIO2_FLEXIO0           0x0108 0x040c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__GPIO6_IO0                 0x0108 0x040c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_MDC_GPIO1__FLEXPWM2_PWMX0            0x0108 0x040c 0x06a0 0x06 0x01
+#define IMX94_PAD_ETH2_MDC_GPIO1__XBAR1_XBAR_INOUT30        0x0108 0x040c 0x08b0 0x07 0x01
+
+#define IMX94_PAD_ETH2_MDIO_GPIO2__NETC_EMDIO               0x010c 0x0410 0x0678 0x00 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__NETC_ETH2_SLV_MDIO       0x010c 0x0410 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__I3C2_SDA                 0x010c 0x0410 0x0724 0x02 0x02
+#define IMX94_PAD_ETH2_MDIO_GPIO2__USB1_OTG_PWR             0x010c 0x0410 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__FLEXIO2_FLEXIO1          0x010c 0x0410 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__GPIO6_IO1                0x010c 0x0410 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_MDIO_GPIO2__FLEXPWM2_PWMX1           0x010c 0x0410 0x06a4 0x06 0x01
+#define IMX94_PAD_ETH2_MDIO_GPIO2__XBAR1_XBAR_INOUT31       0x010c 0x0410 0x08b4 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD3__NETC_PINMUX_ETH2_TXD3          0x0110 0x0414 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD3__LPUART3_DCD_B                  0x0110 0x0414 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD3__CAN2_TX                        0x0110 0x0414 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD3__USB2_OTG_ID                    0x0110 0x0414 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD3__FLEXIO2_FLEXIO2                0x0110 0x0414 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD3__GPIO6_IO2                      0x0110 0x0414 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD3__FLEXPWM2_PWMA0                 0x0110 0x0414 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD3__XBAR1_XBAR_INOUT32             0x0110 0x0414 0x08b8 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD2__NETC_PINMUX_ETH2_TXD2          0x0114 0x0418 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD2__ETH2_RMII_REF50_CLK            0x0114 0x0418 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD2__CAN2_RX                        0x0114 0x0418 0x067c 0x02 0x03
+#define IMX94_PAD_ETH2_TXD2__USB2_OTG_OC                    0x0114 0x0418 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD2__FLEXIO2_FLEXIO3                0x0114 0x0418 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD2__GPIO6_IO3                      0x0114 0x0418 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD2__FLEXPWM2_PWMB0                 0x0114 0x0418 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD2__XBAR1_XBAR_INOUT33             0x0114 0x0418 0x08bc 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD1__NETC_PINMUX_ETH2_TXD1          0x0118 0x041c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD1__LPUART3_RTS_B                  0x0118 0x041c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TXD1__ECAT_CLK25                     0x0118 0x041c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD1__USB1_OTG_OC                    0x0118 0x041c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD1__FLEXIO2_FLEXIO4                0x0118 0x041c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD1__GPIO6_IO4                      0x0118 0x041c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD1__FLEXPWM2_PWMA1                 0x0118 0x041c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD1__XBAR1_XBAR_INOUT34             0x0118 0x041c 0x08c0 0x07 0x01
+
+#define IMX94_PAD_ETH2_TXD0__NETC_PINMUX_ETH2_TXD0          0x011c 0x0420 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TXD0__LPUART3_TX                     0x011c 0x0420 0x07a8 0x01 0x02
+#define IMX94_PAD_ETH2_TXD0__I3C2_PUR                       0x011c 0x0420 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TXD0__I3C2_PUR_B                     0x011c 0x0420 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_TXD0__FLEXIO2_FLEXIO5                0x011c 0x0420 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TXD0__GPIO6_IO5                      0x011c 0x0420 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TXD0__FLEXPWM2_PWMB1                 0x011c 0x0420 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TXD0__XBAR1_XBAR_INOUT35             0x011c 0x0420 0x08c4 0x07 0x01
+
+#define IMX94_PAD_ETH2_TX_CTL__NETC_PINMUX_ETH2_TX_CTL      0x0120 0x0424 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TX_CTL__LPUART3_DTR_B                0x0120 0x0424 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_TX_CTL__ECAT_LED_RUN                 0x0120 0x0424 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TX_CTL__FLEXIO2_FLEXIO6              0x0120 0x0424 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TX_CTL__GPIO6_IO6                    0x0120 0x0424 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TX_CTL__FLEXPWM2_PWMA2               0x0120 0x0424 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TX_CTL__XBAR1_XBAR_INOUT36           0x0120 0x0424 0x08c8 0x07 0x01
+
+#define IMX94_PAD_ETH2_TX_CLK__NETC_PINMUX_ETH2_TX_CLK      0x0124 0x0428 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_TX_CLK__ECAT_LED_ERR                 0x0124 0x0428 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_TX_CLK__FLEXIO2_FLEXIO7              0x0124 0x0428 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_TX_CLK__GPIO6_IO7                    0x0124 0x0428 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_TX_CLK__FLEXPWM2_PWMB2               0x0124 0x0428 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_TX_CLK__XBAR1_XBAR_INOUT37           0x0124 0x0428 0x08cc 0x07 0x01
+
+#define IMX94_PAD_ETH2_RX_CTL__NETC_PINMUX_ETH2_RX_CTL      0x0128 0x042c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RX_CTL__LPUART3_DSR_B                0x0128 0x042c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_RX_CTL__ECAT_LED_STATE_RUN           0x0128 0x042c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_RX_CTL__USB2_OTG_PWR                 0x0128 0x042c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH2_RX_CTL__FLEXIO2_FLEXIO8              0x0128 0x042c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RX_CTL__GPIO6_IO8                    0x0128 0x042c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RX_CTL__FLEXPWM2_PWMA3               0x0128 0x042c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RX_CTL__SINC4_EMCLK0                 0x0128 0x042c 0x082c 0x07 0x01
+
+#define IMX94_PAD_ETH2_RX_CLK__NETC_PINMUX_ETH2_RX_CLK      0x012c 0x0430 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RX_CLK__LPUART3_RIN_B                0x012c 0x0430 0x0000 0x01 0x00
+#define IMX94_PAD_ETH2_RX_CLK__ECAT_RESET_OUT               0x012c 0x0430 0x0000 0x02 0x00
+#define IMX94_PAD_ETH2_RX_CLK__XBAR1_XBAR_INOUT38           0x012c 0x0430 0x08d0 0x03 0x01
+#define IMX94_PAD_ETH2_RX_CLK__FLEXIO2_FLEXIO9              0x012c 0x0430 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RX_CLK__GPIO6_IO9                    0x012c 0x0430 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RX_CLK__FLEXPWM2_PWMB3               0x012c 0x0430 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RX_CLK__SINC4_EMBIT0                 0x012c 0x0430 0x0820 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD0__NETC_PINMUX_ETH2_RXD0          0x0130 0x0434 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD0__LPUART3_RX                     0x0130 0x0434 0x07a4 0x01 0x02
+#define IMX94_PAD_ETH2_RXD0__FLEXIO2_FLEXIO10               0x0130 0x0434 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD0__GPIO6_IO10                     0x0130 0x0434 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD0__DIG_ENCODER2_DATA_EN           0x0130 0x0434 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RXD0__XBAR1_XBAR_INOUT39             0x0130 0x0434 0x08d4 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD1__NETC_PINMUX_ETH2_RXD1          0x0134 0x0438 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD1__LPUART3_CTS_B                  0x0134 0x0438 0x07a0 0x01 0x01
+#define IMX94_PAD_ETH2_RXD1__LPTMR2_ALT0                    0x0134 0x0438 0x0780 0x03 0x00
+#define IMX94_PAD_ETH2_RXD1__FLEXIO2_FLEXIO11               0x0134 0x0438 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD1__GPIO6_IO11                     0x0134 0x0438 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD1__DIG_ENCODER2_DATA_CLK          0x0134 0x0438 0x068c 0x06 0x00
+#define IMX94_PAD_ETH2_RXD1__XBAR1_XBAR_INOUT40             0x0134 0x0438 0x08d8 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD2__NETC_PINMUX_ETH2_RXD2          0x0138 0x043c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD2__LPTMR2_ALT1                    0x0138 0x043c 0x0784 0x03 0x00
+#define IMX94_PAD_ETH2_RXD2__FLEXIO2_FLEXIO12               0x0138 0x043c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD2__GPIO6_IO12                     0x0138 0x043c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD2__DIG_ENCODER2_DATA_OUT          0x0138 0x043c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH2_RXD2__XBAR1_XBAR_INOUT41             0x0138 0x043c 0x08dc 0x07 0x01
+
+#define IMX94_PAD_ETH2_RXD3__NETC_PINMUX_ETH2_RXD3          0x013c 0x0440 0x0000 0x00 0x00
+#define IMX94_PAD_ETH2_RXD3__LPTMR2_ALT2                    0x013c 0x0440 0x0788 0x03 0x00
+#define IMX94_PAD_ETH2_RXD3__FLEXIO2_FLEXIO13               0x013c 0x0440 0x0000 0x04 0x00
+#define IMX94_PAD_ETH2_RXD3__GPIO6_IO13                     0x013c 0x0440 0x0000 0x05 0x00
+#define IMX94_PAD_ETH2_RXD3__DIG_ENCODER2_DATA_IN           0x013c 0x0440 0x0690 0x06 0x00
+#define IMX94_PAD_ETH2_RXD3__XBAR1_XBAR_INOUT42             0x013c 0x0440 0x08e0 0x07 0x01
+
+#define IMX94_PAD_ETH3_MDC_GPIO1__NETC_EMDC                 0x0140 0x0444 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__LPUART4_DCD_B             0x0140 0x0444 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__NETC_ETH3_SLV_MDC         0x0140 0x0444 0x0000 0x02 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__SAI4_TX_SYNC              0x0140 0x0444 0x081c 0x03 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__FLEXIO2_FLEXIO14          0x0140 0x0444 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__GPIO6_IO14                0x0140 0x0444 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_MDC_GPIO1__FLEXPWM1_PWMX0            0x0140 0x0444 0x0698 0x06 0x01
+#define IMX94_PAD_ETH3_MDC_GPIO1__SINC4_MOD_CLK0            0x0140 0x0444 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH3_MDIO_GPIO2__NETC_EMDIO               0x0144 0x0448 0x0678 0x00 0x01
+#define IMX94_PAD_ETH3_MDIO_GPIO2__LPUART4_RIN_B            0x0144 0x0448 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__NETC_ETH3_SLV_MDIO       0x0144 0x0448 0x0000 0x02 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__SAI4_TX_BCLK             0x0144 0x0448 0x0818 0x03 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__FLEXIO2_FLEXIO15         0x0144 0x0448 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__GPIO6_IO15               0x0144 0x0448 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_MDIO_GPIO2__FLEXPWM1_PWMX1           0x0144 0x0448 0x069c 0x06 0x01
+#define IMX94_PAD_ETH3_MDIO_GPIO2__SINC4_MOD_CLK1           0x0144 0x0448 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH3_TXD3__NETC_PINMUX_ETH3_TXD3          0x0148 0x044c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD3__XSPI_SLV_DATA7                 0x0148 0x044c 0x0924 0x02 0x00
+#define IMX94_PAD_ETH3_TXD3__SAI4_TX_DATA0                  0x0148 0x044c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH3_TXD3__LPUART3_TX                     0x0148 0x044c 0x07a8 0x04 0x03
+#define IMX94_PAD_ETH3_TXD3__GPIO6_IO16                     0x0148 0x044c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD3__FLEXPWM1_PWMA0                 0x0148 0x044c 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD2__NETC_PINMUX_ETH3_TXD2          0x014c 0x0450 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD2__ETH3_RMII_REF50_CLK            0x014c 0x0450 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TXD2__XSPI_SLV_DATA6                 0x014c 0x0450 0x0920 0x02 0x00
+#define IMX94_PAD_ETH3_TXD2__SAI4_RX_SYNC                   0x014c 0x0450 0x0814 0x03 0x00
+#define IMX94_PAD_ETH3_TXD2__GPIO6_IO17                     0x014c 0x0450 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD2__FLEXPWM1_PWMB0                 0x014c 0x0450 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD1__NETC_PINMUX_ETH3_TXD1          0x0150 0x0454 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD1__LPUART4_RTS_B                  0x0150 0x0454 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TXD1__XSPI_SLV_DATA5                 0x0150 0x0454 0x091c 0x02 0x00
+#define IMX94_PAD_ETH3_TXD1__SAI4_RX_BCLK                   0x0150 0x0454 0x080c 0x03 0x00
+#define IMX94_PAD_ETH3_TXD1__GPIO6_IO18                     0x0150 0x0454 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD1__FLEXPWM1_PWMA1                 0x0150 0x0454 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TXD0__NETC_PINMUX_ETH3_TXD0          0x0154 0x0458 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TXD0__LPUART4_TX                     0x0154 0x0458 0x07b4 0x01 0x02
+#define IMX94_PAD_ETH3_TXD0__XSPI_SLV_DATA4                 0x0154 0x0458 0x0918 0x02 0x00
+#define IMX94_PAD_ETH3_TXD0__SAI4_RX_DATA0                  0x0154 0x0458 0x0810 0x03 0x00
+#define IMX94_PAD_ETH3_TXD0__GPIO6_IO19                     0x0154 0x0458 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TXD0__FLEXPWM1_PWMB1                 0x0154 0x0458 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TX_CTL__NETC_PINMUX_ETH3_TX_CTL      0x0158 0x045c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TX_CTL__LPUART4_DTR_B                0x0158 0x045c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_TX_CTL__XSPI_SLV_DQS                 0x0158 0x045c 0x0900 0x02 0x00
+#define IMX94_PAD_ETH3_TX_CTL__SAI4_MCLK                    0x0158 0x045c 0x0808 0x03 0x00
+#define IMX94_PAD_ETH3_TX_CTL__LPUART3_RX                   0x0158 0x045c 0x07a4 0x04 0x03
+#define IMX94_PAD_ETH3_TX_CTL__GPIO6_IO20                   0x0158 0x045c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TX_CTL__FLEXPWM1_PWMA2               0x0158 0x045c 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_TX_CLK__NETC_PINMUX_ETH3_TX_CLK      0x015c 0x0460 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_TX_CLK__XSPI_SLV_CLK                 0x015c 0x0460 0x0904 0x02 0x00
+#define IMX94_PAD_ETH3_TX_CLK__SAI2_TX_SYNC                 0x015c 0x0460 0x07fc 0x03 0x01
+#define IMX94_PAD_ETH3_TX_CLK__LPUART3_CTS_B                0x015c 0x0460 0x07a0 0x04 0x02
+#define IMX94_PAD_ETH3_TX_CLK__GPIO6_IO21                   0x015c 0x0460 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_TX_CLK__FLEXPWM1_PWMB2               0x015c 0x0460 0x0000 0x06 0x00
+
+#define IMX94_PAD_ETH3_RX_CTL__NETC_PINMUX_ETH3_RX_CTL      0x0160 0x0464 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RX_CTL__LPUART4_DSR_B                0x0160 0x0464 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RX_CTL__XSPI_SLV_CS                  0x0160 0x0464 0x08fc 0x02 0x00
+#define IMX94_PAD_ETH3_RX_CTL__SAI2_TX_BCLK                 0x0160 0x0464 0x07f8 0x03 0x01
+#define IMX94_PAD_ETH3_RX_CTL__XBAR1_XBAR_INOUT43           0x0160 0x0464 0x08e4 0x04 0x01
+#define IMX94_PAD_ETH3_RX_CTL__GPIO6_IO22                   0x0160 0x0464 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RX_CTL__FLEXPWM1_PWMA3               0x0160 0x0464 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RX_CTL__SINC4_EMCLK1                 0x0160 0x0464 0x0830 0x07 0x01
+
+#define IMX94_PAD_ETH3_RX_CLK__NETC_PINMUX_ETH3_RX_CLK      0x0164 0x0468 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RX_CLK__LPUART4_CTS_B                0x0164 0x0468 0x07ac 0x01 0x01
+#define IMX94_PAD_ETH3_RX_CLK__XSPI_SLV_DATA3               0x0164 0x0468 0x0914 0x02 0x00
+#define IMX94_PAD_ETH3_RX_CLK__SAI2_TX_DATA0                0x0164 0x0468 0x0000 0x03 0x00
+#define IMX94_PAD_ETH3_RX_CLK__XBAR1_XBAR_INOUT44           0x0164 0x0468 0x08e8 0x04 0x01
+#define IMX94_PAD_ETH3_RX_CLK__GPIO6_IO23                   0x0164 0x0468 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RX_CLK__FLEXPWM1_PWMB3               0x0164 0x0468 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RX_CLK__SINC4_EMBIT1                 0x0164 0x0468 0x0824 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD0__NETC_PINMUX_ETH3_RXD0          0x0168 0x046c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD0__LPUART4_RX                     0x0168 0x046c 0x07b0 0x01 0x02
+#define IMX94_PAD_ETH3_RXD0__XSPI_SLV_DATA2                 0x0168 0x046c 0x0910 0x02 0x00
+#define IMX94_PAD_ETH3_RXD0__SAI2_RX_SYNC                   0x0168 0x046c 0x07f4 0x03 0x01
+#define IMX94_PAD_ETH3_RXD0__GPIO6_IO24                     0x0168 0x046c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD0__DIG_ENCODER1_DATA_EN           0x0168 0x046c 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD0__XBAR1_XBAR_INOUT45             0x0168 0x046c 0x08ec 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD1__NETC_PINMUX_ETH3_RXD1          0x016c 0x0470 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD1__XSPI_SLV_DATA1                 0x016c 0x0470 0x090c 0x02 0x00
+#define IMX94_PAD_ETH3_RXD1__SAI2_RX_BCLK                   0x016c 0x0470 0x07ec 0x03 0x01
+#define IMX94_PAD_ETH3_RXD1__LPUART3_RTS_B                  0x016c 0x0470 0x0000 0x04 0x00
+#define IMX94_PAD_ETH3_RXD1__GPIO6_IO25                     0x016c 0x0470 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD1__DIG_ENCODER1_DATA_CLK          0x016c 0x0470 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD1__XBAR1_XBAR_INOUT46             0x016c 0x0470 0x08f0 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD2__NETC_PINMUX_ETH3_RXD2          0x0170 0x0474 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD2__MQS2_RIGHT                     0x0170 0x0474 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RXD2__XSPI_SLV_DATA0                 0x0170 0x0474 0x0908 0x02 0x00
+#define IMX94_PAD_ETH3_RXD2__SAI2_RX_DATA0                  0x0170 0x0474 0x07f0 0x03 0x01
+#define IMX94_PAD_ETH3_RXD2__GPIO6_IO26                     0x0170 0x0474 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD2__DIG_ENCODER1_DATA_OUT          0x0170 0x0474 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD2__XBAR1_XBAR_INOUT47             0x0170 0x0474 0x08f4 0x07 0x01
+
+#define IMX94_PAD_ETH3_RXD3__NETC_PINMUX_ETH3_RXD3          0x0174 0x0478 0x0000 0x00 0x00
+#define IMX94_PAD_ETH3_RXD3__MQS2_LEFT                      0x0174 0x0478 0x0000 0x01 0x00
+#define IMX94_PAD_ETH3_RXD3__SAI2_MCLK                      0x0174 0x0478 0x07e8 0x03 0x01
+#define IMX94_PAD_ETH3_RXD3__GPIO6_IO27                     0x0174 0x0478 0x0000 0x05 0x00
+#define IMX94_PAD_ETH3_RXD3__DIG_ENCODER1_DATA_IN           0x0174 0x0478 0x0000 0x06 0x00
+#define IMX94_PAD_ETH3_RXD3__XBAR1_XBAR_INOUT48             0x0174 0x0478 0x08f8 0x07 0x01
+
+#define IMX94_PAD_ETH4_MDC_GPIO1__NETC_EMDC                 0x0178 0x047c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__ECAT_MDC                  0x0178 0x047c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__ECAT_CLK25                0x0178 0x047c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__NETC_ETH4_SLV_MDC         0x0178 0x047c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__FLEXIO1_3_2_FLEXIO12      0x0178 0x047c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__GPIO6_IO28                0x0178 0x047c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_MDC_GPIO1__FLEXPWM4_PWMX0            0x0178 0x047c 0x06f4 0x06 0x02
+#define IMX94_PAD_ETH4_MDC_GPIO1__SINC4_MOD_CLK2            0x0178 0x047c 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_MDIO_GPIO2__NETC_EMDIO               0x017c 0x0480 0x0678 0x00 0x02
+#define IMX94_PAD_ETH4_MDIO_GPIO2__ECAT_MDIO                0x017c 0x0480 0x0628 0x01 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__ENET_REF_CLK_ROOT        0x017c 0x0480 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__NETC_ETH4_SLV_MDIO       0x017c 0x0480 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__FLEXIO1_3_2_FLEXIO13     0x017c 0x0480 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__GPIO6_IO29               0x017c 0x0480 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_MDIO_GPIO2__FLEXPWM4_PWMX1           0x017c 0x0480 0x06f8 0x06 0x02
+#define IMX94_PAD_ETH4_MDIO_GPIO2__SINC_FILTER_GLUE4_BREAK  0x017c 0x0480 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_TX_CLK__NETC_PINMUX_ETH4_TX_CLK      0x0180 0x0484 0x0648 0x00 0x00
+#define IMX94_PAD_ETH4_TX_CLK__USDHC3_CLK                   0x0180 0x0484 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_TX_CLK__XSPI2_A_SCLK                 0x0180 0x0484 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TX_CLK__ECAT_LED_ERR                 0x0180 0x0484 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TX_CLK__FLEXIO1_3_2_FLEXIO0          0x0180 0x0484 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TX_CLK__GPIO6_IO30                   0x0180 0x0484 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TX_CLK__FLEXPWM4_PWMA0               0x0180 0x0484 0x06d4 0x06 0x01
+#define IMX94_PAD_ETH4_TX_CLK__XBAR1_XBAR_INOUT30           0x0180 0x0484 0x08b0 0x07 0x02
+
+#define IMX94_PAD_ETH4_TX_CTL__NETC_PINMUX_ETH4_TX_CTL      0x0184 0x0488 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TX_CTL__USDHC3_CMD                   0x0184 0x0488 0x0858 0x01 0x01
+#define IMX94_PAD_ETH4_TX_CTL__XSPI2_A_SS0_B                0x0184 0x0488 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TX_CTL__ECAT_RESET_OUT               0x0184 0x0488 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TX_CTL__FLEXIO1_3_2_FLEXIO1          0x0184 0x0488 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TX_CTL__GPIO6_IO31                   0x0184 0x0488 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TX_CTL__FLEXPWM4_PWMB0               0x0184 0x0488 0x06e4 0x06 0x01
+#define IMX94_PAD_ETH4_TX_CTL__XBAR1_XBAR_INOUT31           0x0184 0x0488 0x08b4 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD0__NETC_PINMUX_ETH4_TXD0          0x0188 0x048c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD0__USDHC3_DATA0                   0x0188 0x048c 0x085c 0x01 0x01
+#define IMX94_PAD_ETH4_TXD0__XSPI2_A_DATA0                  0x0188 0x048c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD0__ECAT_LED_RUN                   0x0188 0x048c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD0__FLEXIO1_3_2_FLEXIO2            0x0188 0x048c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD0__GPIO7_IO0                      0x0188 0x048c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD0__FLEXPWM4_PWMA1                 0x0188 0x048c 0x06d8 0x06 0x01
+#define IMX94_PAD_ETH4_TXD0__XBAR1_XBAR_INOUT32             0x0188 0x048c 0x08b8 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD1__NETC_PINMUX_ETH4_TXD1          0x018c 0x0490 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD1__USDHC3_DATA1                   0x018c 0x0490 0x0860 0x01 0x01
+#define IMX94_PAD_ETH4_TXD1__XSPI2_A_DATA1                  0x018c 0x0490 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD1__ECAT_LED_STATE_RUN             0x018c 0x0490 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD1__FLEXIO1_3_2_FLEXIO3            0x018c 0x0490 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD1__GPIO7_IO1                      0x018c 0x0490 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD1__FLEXPWM4_PWMB1                 0x018c 0x0490 0x06e8 0x06 0x01
+#define IMX94_PAD_ETH4_TXD1__XBAR1_XBAR_INOUT33             0x018c 0x0490 0x08bc 0x07 0x02
+
+#define IMX94_PAD_ETH4_TXD2__NETC_PINMUX_ETH4_TXD2          0x0190 0x0494 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD2__USDHC3_DATA2                   0x0190 0x0494 0x0864 0x01 0x01
+#define IMX94_PAD_ETH4_TXD2__XSPI2_A_DATA2                  0x0190 0x0494 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD2__ECAT_CLK25                     0x0190 0x0494 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_TXD2__FLEXIO1_3_2_FLEXIO4            0x0190 0x0494 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD2__GPIO7_IO2                      0x0190 0x0494 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD2__FLEXPWM4_PWMA2                 0x0190 0x0494 0x06dc 0x06 0x01
+#define IMX94_PAD_ETH4_TXD2__ETH4_RMII_REF50_CLK            0x0190 0x0494 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH4_TXD3__NETC_PINMUX_ETH4_TXD3          0x0194 0x0498 0x0000 0x00 0x00
+#define IMX94_PAD_ETH4_TXD3__USDHC3_DATA3                   0x0194 0x0498 0x0868 0x01 0x01
+#define IMX94_PAD_ETH4_TXD3__XSPI2_A_DATA3                  0x0194 0x0498 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_TXD3__FLEXIO1_3_2_FLEXIO5            0x0194 0x0498 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_TXD3__GPIO7_IO3                      0x0194 0x0498 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_TXD3__FLEXPWM4_PWMB2                 0x0194 0x0498 0x06ec 0x06 0x01
+#define IMX94_PAD_ETH4_TXD3__XBAR1_XBAR_INOUT35             0x0194 0x0498 0x08c4 0x07 0x02
+
+#define IMX94_PAD_ETH4_RXD0__NETC_PINMUX_ETH4_RXD0          0x0198 0x049c 0x0638 0x00 0x00
+#define IMX94_PAD_ETH4_RXD0__XSPI2_A_DATA4                  0x0198 0x049c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD0__FLEXIO1_3_2_FLEXIO6            0x0198 0x049c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD0__GPIO7_IO4                      0x0198 0x049c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD0__FLEXPWM4_PWMA3                 0x0198 0x049c 0x06e0 0x06 0x01
+#define IMX94_PAD_ETH4_RXD0__SINC4_EMCLK2                   0x0198 0x049c 0x0834 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD1__NETC_PINMUX_ETH4_RXD1          0x019c 0x04a0 0x063c 0x00 0x00
+#define IMX94_PAD_ETH4_RXD1__XSPI2_A_DATA5                  0x019c 0x04a0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXIO2_4_1_FLEXIO11           0x019c 0x04a0 0x0694 0x03 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXIO1_3_2_FLEXIO7            0x019c 0x04a0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD1__GPIO7_IO5                      0x019c 0x04a0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD1__FLEXPWM4_PWMB3                 0x019c 0x04a0 0x06f0 0x06 0x01
+#define IMX94_PAD_ETH4_RXD1__SINC4_EMBIT2                   0x019c 0x04a0 0x0828 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD2__NETC_PINMUX_ETH4_RXD2          0x01a0 0x04a4 0x0640 0x00 0x00
+#define IMX94_PAD_ETH4_RXD2__XSPI2_A_DATA6                  0x01a0 0x04a4 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD2__FLEXIO2_4_1_FLEXIO12           0x01a0 0x04a4 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RXD2__FLEXIO1_3_2_FLEXIO8            0x01a0 0x04a4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD2__GPIO7_IO6                      0x01a0 0x04a4 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD2__DIG_ENCODER2_DATA_EN           0x01a0 0x04a4 0x0000 0x06 0x00
+#define IMX94_PAD_ETH4_RXD2__XBAR1_XBAR_INOUT4              0x01a0 0x04a4 0x086c 0x07 0x01
+
+#define IMX94_PAD_ETH4_RXD3__NETC_PINMUX_ETH4_RXD3          0x01a4 0x04a8 0x0644 0x00 0x00
+#define IMX94_PAD_ETH4_RXD3__ENET_REF_CLK_ROOT              0x01a4 0x04a8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH4_RXD3__XSPI2_A_DATA7                  0x01a4 0x04a8 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RXD3__FLEXIO2_4_1_FLEXIO13           0x01a4 0x04a8 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RXD3__FLEXIO1_3_2_FLEXIO9            0x01a4 0x04a8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RXD3__GPIO7_IO7                      0x01a4 0x04a8 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RXD3__DIG_ENCODER2_DATA_CLK          0x01a4 0x04a8 0x068c 0x06 0x01
+#define IMX94_PAD_ETH4_RXD3__XBAR1_XBAR_INOUT5              0x01a4 0x04a8 0x0870 0x07 0x01
+
+#define IMX94_PAD_ETH4_RX_CTL__NETC_PINMUX_ETH4_RX_CTL      0x01a8 0x04ac 0x0634 0x00 0x00
+#define IMX94_PAD_ETH4_RX_CTL__XSPI2_A_SS1_B                0x01a8 0x04ac 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RX_CTL__FLEXIO2_4_1_FLEXIO14         0x01a8 0x04ac 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RX_CTL__FLEXIO1_3_2_FLEXIO10         0x01a8 0x04ac 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RX_CTL__GPIO7_IO8                    0x01a8 0x04ac 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RX_CTL__DIG_ENCODER2_DATA_OUT        0x01a8 0x04ac 0x0000 0x06 0x00
+#define IMX94_PAD_ETH4_RX_CTL__XBAR1_XBAR_INOUT6            0x01a8 0x04ac 0x0874 0x07 0x01
+
+#define IMX94_PAD_ETH4_RX_CLK__NETC_PINMUX_ETH4_RX_CLK      0x01ac 0x04b0 0x0630 0x00 0x00
+#define IMX94_PAD_ETH4_RX_CLK__XSPI2_A_DQS                  0x01ac 0x04b0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH4_RX_CLK__FLEXIO2_4_1_FLEXIO15         0x01ac 0x04b0 0x0000 0x03 0x00
+#define IMX94_PAD_ETH4_RX_CLK__FLEXIO1_3_2_FLEXIO11         0x01ac 0x04b0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH4_RX_CLK__GPIO7_IO9                    0x01ac 0x04b0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH4_RX_CLK__DIG_ENCODER2_DATA_IN         0x01ac 0x04b0 0x0690 0x06 0x01
+#define IMX94_PAD_ETH4_RX_CLK__XBAR1_XBAR_INOUT7            0x01ac 0x04b0 0x0878 0x07 0x01
+
+#define IMX94_PAD_ETH0_TXD0__NETC_PINMUX_ETH0_TXD0          0x01b0 0x04b4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD0__ECAT_PT0_TXD0                  0x01b0 0x04b4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD0__FLEXIO4_FLEXIO0                0x01b0 0x04b4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD0__GPIO5_IO0                      0x01b0 0x04b4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD1__NETC_PINMUX_ETH0_TXD1          0x01b4 0x04b8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD1__ECAT_PT0_TXD1                  0x01b4 0x04b8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD1__FLEXIO4_FLEXIO1                0x01b4 0x04b8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD1__GPIO5_IO1                      0x01b4 0x04b8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_EN__NETC_PINMUX_ETH0_TX_EN        0x01b8 0x04bc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_EN__ECAT_PT0_TX_EN                0x01b8 0x04bc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_EN__FLEXIO4_FLEXIO2               0x01b8 0x04bc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_EN__GPIO5_IO2                     0x01b8 0x04bc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_CLK__NETC_PINMUX_ETH0_TX_CLK      0x01bc 0x04c0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_CLK__ECAT_PT0_TX_CLK              0x01bc 0x04c0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_CLK__FLEXIO4_FLEXIO3              0x01bc 0x04c0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_CLK__GPIO5_IO3                    0x01bc 0x04c0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD0__NETC_PINMUX_ETH0_RXD0          0x01c0 0x04c4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD0__ECAT_PT0_RXD0                  0x01c0 0x04c4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD0__FLEXIO4_FLEXIO4                0x01c0 0x04c4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD0__GPIO5_IO4                      0x01c0 0x04c4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD1__NETC_PINMUX_ETH0_RXD1          0x01c4 0x04c8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD1__ECAT_PT0_RXD1                  0x01c4 0x04c8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD1__FLEXIO4_FLEXIO5                0x01c4 0x04c8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD1__GPIO5_IO5                      0x01c4 0x04c8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_DV__NETC_PINMUX_ETH0_RX_DV        0x01c8 0x04cc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_DV__ECAT_PT0_RX_DV                0x01c8 0x04cc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_DV__FLEXIO4_FLEXIO6               0x01c8 0x04cc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_DV__GPIO5_IO6                     0x01c8 0x04cc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD2__NETC_PINMUX_ETH0_TXD2          0x01cc 0x04d0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD2__ECAT_PT0_TXD2                  0x01cc 0x04d0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD2__ETH0_RMII_REF50_CLK            0x01cc 0x04d0 0x0000 0x02 0x00
+#define IMX94_PAD_ETH0_TXD2__FLEXIO4_FLEXIO7                0x01cc 0x04d0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD2__GPIO5_IO7                      0x01cc 0x04d0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TXD3__NETC_PINMUX_ETH0_TXD3          0x01d0 0x04d4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TXD3__ECAT_PT0_TXD3                  0x01d0 0x04d4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TXD3__FLEXIO4_FLEXIO8                0x01d0 0x04d4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TXD3__GPIO5_IO8                      0x01d0 0x04d4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD2__NETC_PINMUX_ETH0_RXD2          0x01d4 0x04d8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD2__ECAT_PT0_RXD2                  0x01d4 0x04d8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD2__FLEXIO4_FLEXIO9                0x01d4 0x04d8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD2__GPIO5_IO9                      0x01d4 0x04d8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RXD3__NETC_PINMUX_ETH0_RXD3          0x01d8 0x04dc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RXD3__ECAT_PT0_RXD3                  0x01d8 0x04dc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RXD3__FLEXIO4_FLEXIO10               0x01d8 0x04dc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RXD3__GPIO5_IO10                     0x01d8 0x04dc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_CLK__NETC_PINMUX_ETH0_RX_CLK      0x01dc 0x04e0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_CLK__ECAT_PT0_RX_CLK              0x01dc 0x04e0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_CLK__FLEXIO4_FLEXIO11             0x01dc 0x04e0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_CLK__GPIO5_IO11                   0x01dc 0x04e0 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_RX_ER__NETC_PINMUX_ETH0_RX_ER        0x01e0 0x04e4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_RX_ER__ECAT_PT0_RX_ER                0x01e0 0x04e4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_RX_ER__FLEXIO4_FLEXIO12              0x01e0 0x04e4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_RX_ER__GPIO5_IO12                    0x01e0 0x04e4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_TX_ER__NETC_PINMUX_ETH0_TX_ER        0x01e4 0x04e8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_TX_ER__ECAT_LINK_ACT0                0x01e4 0x04e8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_TX_ER__FLEXIO4_FLEXIO13              0x01e4 0x04e8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_TX_ER__GPIO5_IO13                    0x01e4 0x04e8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH0_CRS__NETC_PINMUX_ETH0_CRS            0x01e8 0x04ec 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_CRS__ECAT_LINK0                      0x01e8 0x04ec 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_CRS__NETC_EMDC                       0x01e8 0x04ec 0x0000 0x02 0x00
+#define IMX94_PAD_ETH0_CRS__FLEXIO4_FLEXIO14                0x01e8 0x04ec 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_CRS__GPIO5_IO14                      0x01e8 0x04ec 0x0000 0x05 0x00
+#define IMX94_PAD_ETH0_CRS__XBAR1_XBAR_INOUT8               0x01e8 0x04ec 0x087c 0x06 0x02
+#define IMX94_PAD_ETH0_CRS__SINC_FILTER_GLUE2_BREAK         0x01e8 0x04ec 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH0_COL__NETC_PINMUX_ETH0_COL            0x01ec 0x04f0 0x0000 0x00 0x00
+#define IMX94_PAD_ETH0_COL__ECAT_LINK1                      0x01ec 0x04f0 0x0000 0x01 0x00
+#define IMX94_PAD_ETH0_COL__NETC_EMDIO                      0x01ec 0x04f0 0x0678 0x02 0x03
+#define IMX94_PAD_ETH0_COL__FLEXIO4_FLEXIO15                0x01ec 0x04f0 0x0000 0x04 0x00
+#define IMX94_PAD_ETH0_COL__GPIO5_IO15                      0x01ec 0x04f0 0x0000 0x05 0x00
+#define IMX94_PAD_ETH0_COL__XBAR1_XBAR_INOUT9               0x01ec 0x04f0 0x0880 0x06 0x02
+#define IMX94_PAD_ETH0_COL__SINC_FILTER_GLUE1_BREAK         0x01ec 0x04f0 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH1_TXD0__NETC_PINMUX_ETH1_TXD0          0x01f0 0x04f4 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD0__ECAT_PT1_TXD0                  0x01f0 0x04f4 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD0__ENCODER_DIAG0                  0x01f0 0x04f4 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD0__FLEXIO3_FLEXIO0                0x01f0 0x04f4 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD0__GPIO5_IO16                     0x01f0 0x04f4 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD1__NETC_PINMUX_ETH1_TXD1          0x01f4 0x04f8 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD1__ECAT_PT1_TXD1                  0x01f4 0x04f8 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD1__ENCODER_DIAG1                  0x01f4 0x04f8 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD1__FLEXIO3_FLEXIO1                0x01f4 0x04f8 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD1__GPIO5_IO17                     0x01f4 0x04f8 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_EN__NETC_PINMUX_ETH1_TX_EN        0x01f8 0x04fc 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_EN__ECAT_PT1_TX_EN                0x01f8 0x04fc 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_EN__ENCODER_DIAG2                 0x01f8 0x04fc 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_EN__FLEXIO3_FLEXIO2               0x01f8 0x04fc 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_EN__GPIO5_IO18                    0x01f8 0x04fc 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_CLK__NETC_PINMUX_ETH1_TX_CLK      0x01fc 0x0500 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_CLK__ECAT_PT1_TX_CLK              0x01fc 0x0500 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_CLK__ENCODER_DIAG3                0x01fc 0x0500 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_CLK__FLEXIO3_FLEXIO3              0x01fc 0x0500 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_CLK__GPIO5_IO19                   0x01fc 0x0500 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD0__NETC_PINMUX_ETH1_RXD0          0x0200 0x0504 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD0__ECAT_PT1_RXD0                  0x0200 0x0504 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD0__ENCODER_DIAG4                  0x0200 0x0504 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD0__FLEXIO3_FLEXIO4                0x0200 0x0504 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD0__GPIO5_IO20                     0x0200 0x0504 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD1__NETC_PINMUX_ETH1_RXD1          0x0204 0x0508 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD1__ECAT_PT1_RXD1                  0x0204 0x0508 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD1__ENCODER_DIAG5                  0x0204 0x0508 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD1__FLEXIO3_FLEXIO5                0x0204 0x0508 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD1__GPIO5_IO21                     0x0204 0x0508 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_DV__NETC_PINMUX_ETH1_RX_DV        0x0208 0x050c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_DV__ECAT_PT1_RX_DV                0x0208 0x050c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_DV__ENCODER_DIAG6                 0x0208 0x050c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_DV__FLEXIO3_FLEXIO6               0x0208 0x050c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_DV__GPIO5_IO22                    0x0208 0x050c 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD2__NETC_PINMUX_ETH1_TXD2          0x020c 0x0510 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD2__ECAT_PT1_TXD2                  0x020c 0x0510 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD2__ETH1_RMII_REF50_CLK            0x020c 0x0510 0x0000 0x02 0x00
+#define IMX94_PAD_ETH1_TXD2__ENCODER_DIAG7                  0x020c 0x0510 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD2__FLEXIO3_FLEXIO7                0x020c 0x0510 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD2__GPIO5_IO23                     0x020c 0x0510 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TXD3__NETC_PINMUX_ETH1_TXD3          0x0210 0x0514 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TXD3__ECAT_PT1_TXD3                  0x0210 0x0514 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TXD3__ENCODER_DIAG8                  0x0210 0x0514 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TXD3__FLEXIO3_FLEXIO8                0x0210 0x0514 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TXD3__GPIO5_IO24                     0x0210 0x0514 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD2__NETC_PINMUX_ETH1_RXD2          0x0214 0x0518 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD2__ECAT_PT1_RXD2                  0x0214 0x0518 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD2__ENCODER_DIAG9                  0x0214 0x0518 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD2__FLEXIO3_FLEXIO9                0x0214 0x0518 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD2__GPIO5_IO25                     0x0214 0x0518 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RXD3__NETC_PINMUX_ETH1_RXD3          0x0218 0x051c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RXD3__ECAT_PT1_RXD3                  0x0218 0x051c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RXD3__ENCODER_DIAG10                 0x0218 0x051c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RXD3__FLEXIO3_FLEXIO10               0x0218 0x051c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RXD3__GPIO5_IO26                     0x0218 0x051c 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_CLK__NETC_PINMUX_ETH1_RX_CLK      0x021c 0x0520 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_CLK__ECAT_PT1_RX_CLK              0x021c 0x0520 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_CLK__ENCODER_DIAG11               0x021c 0x0520 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_CLK__FLEXIO3_FLEXIO11             0x021c 0x0520 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_CLK__GPIO5_IO27                   0x021c 0x0520 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_RX_ER__NETC_PINMUX_ETH1_RX_ER        0x0220 0x0524 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_RX_ER__ECAT_PT1_RX_ER                0x0220 0x0524 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_RX_ER__ENCODER_DIAG12                0x0220 0x0524 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_RX_ER__FLEXIO3_FLEXIO12              0x0220 0x0524 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_RX_ER__GPIO5_IO28                    0x0220 0x0524 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_TX_ER__NETC_PINMUX_ETH1_TX_ER        0x0224 0x0528 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_TX_ER__ECAT_LINK_ACT1                0x0224 0x0528 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_TX_ER__ENCODER_DIAG13                0x0224 0x0528 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_TX_ER__FLEXIO3_FLEXIO13              0x0224 0x0528 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_TX_ER__GPIO5_IO29                    0x0224 0x0528 0x0000 0x05 0x00
+
+#define IMX94_PAD_ETH1_CRS__NETC_PINMUX_ETH1_CRS            0x0228 0x052c 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_CRS__ECAT_MDC                        0x0228 0x052c 0x0000 0x01 0x00
+#define IMX94_PAD_ETH1_CRS__NETC_EMDC                       0x0228 0x052c 0x0000 0x02 0x00
+#define IMX94_PAD_ETH1_CRS__ENCODER_DIAG14                  0x0228 0x052c 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_CRS__FLEXIO3_FLEXIO14                0x0228 0x052c 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_CRS__GPIO5_IO30                      0x0228 0x052c 0x0000 0x05 0x00
+#define IMX94_PAD_ETH1_CRS__XBAR1_XBAR_INOUT10              0x0228 0x052c 0x0884 0x06 0x02
+#define IMX94_PAD_ETH1_CRS__SINC_FILTER_GLUE1_BREAK         0x0228 0x052c 0x0000 0x07 0x00
+
+#define IMX94_PAD_ETH1_COL__NETC_PINMUX_ETH1_COL            0x022c 0x0530 0x0000 0x00 0x00
+#define IMX94_PAD_ETH1_COL__ECAT_MDIO                       0x022c 0x0530 0x0628 0x01 0x01
+#define IMX94_PAD_ETH1_COL__NETC_EMDIO                      0x022c 0x0530 0x0678 0x02 0x04
+#define IMX94_PAD_ETH1_COL__ENCODER_DIAG15                  0x022c 0x0530 0x0000 0x03 0x00
+#define IMX94_PAD_ETH1_COL__FLEXIO3_FLEXIO15                0x022c 0x0530 0x0000 0x04 0x00
+#define IMX94_PAD_ETH1_COL__GPIO5_IO31                      0x022c 0x0530 0x0000 0x05 0x00
+#define IMX94_PAD_ETH1_COL__XBAR1_XBAR_INOUT11              0x022c 0x0530 0x0888 0x06 0x02
+#define IMX94_PAD_ETH1_COL__SINC_FILTER_GLUE2_BREAK         0x022c 0x0530 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_CLK__USDHC1_CLK                       0x0230 0x0534 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_CLK__SAI4_TX_BCLK                     0x0230 0x0534 0x0818 0x01 0x01
+#define IMX94_PAD_SD1_CLK__CAN4_TX                          0x0230 0x0534 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_CLK__NETC_1588MUX_INOUT0              0x0230 0x0534 0x064c 0x03 0x01
+#define IMX94_PAD_SD1_CLK__FLEXIO2_4_1_FLEXIO0              0x0230 0x0534 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_CLK__GPIO4_IO8                        0x0230 0x0534 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_CLK__FLEXPWM3_PWMX0                   0x0230 0x0534 0x06c8 0x06 0x02
+#define IMX94_PAD_SD1_CLK__SINC1_EMCLK0                     0x0230 0x0534 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_CMD__USDHC1_CMD                       0x0234 0x0538 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_CMD__SAI4_RX_BCLK                     0x0234 0x0538 0x080c 0x01 0x01
+#define IMX94_PAD_SD1_CMD__CAN4_RX                          0x0234 0x0538 0x0684 0x02 0x02
+#define IMX94_PAD_SD1_CMD__NETC_1588MUX_INOUT1              0x0234 0x0538 0x0650 0x03 0x01
+#define IMX94_PAD_SD1_CMD__FLEXIO2_4_1_FLEXIO1              0x0234 0x0538 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_CMD__GPIO4_IO9                        0x0234 0x0538 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_CMD__FLEXPWM3_PWMX1                   0x0234 0x0538 0x06cc 0x06 0x02
+#define IMX94_PAD_SD1_CMD__SINC1_EMBIT0                     0x0234 0x0538 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA0__USDHC1_DATA0                   0x0238 0x053c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA0__SAI4_RX_SYNC                   0x0238 0x053c 0x0814 0x01 0x01
+#define IMX94_PAD_SD1_DATA0__CAN5_TX                        0x0238 0x053c 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA0__NETC_1588MUX_INOUT2            0x0238 0x053c 0x0654 0x03 0x01
+#define IMX94_PAD_SD1_DATA0__FLEXIO2_4_1_FLEXIO2            0x0238 0x053c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA0__GPIO4_IO10                     0x0238 0x053c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA0__FLEXPWM3_PWMX2                 0x0238 0x053c 0x06d0 0x06 0x01
+#define IMX94_PAD_SD1_DATA0__SINC1_EMCLK1                   0x0238 0x053c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA1__USDHC1_DATA1                   0x023c 0x0540 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA1__SAI4_TX_SYNC                   0x023c 0x0540 0x081c 0x01 0x01
+#define IMX94_PAD_SD1_DATA1__CAN5_RX                        0x023c 0x0540 0x0688 0x02 0x03
+#define IMX94_PAD_SD1_DATA1__NETC_1588MUX_INOUT3            0x023c 0x0540 0x0658 0x03 0x01
+#define IMX94_PAD_SD1_DATA1__FLEXIO2_4_1_FLEXIO3            0x023c 0x0540 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA1__GPIO4_IO11                     0x023c 0x0540 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA1__FLEXPWM3_PWMA3                 0x023c 0x0540 0x06b4 0x06 0x01
+#define IMX94_PAD_SD1_DATA1__SINC1_EMBIT1                   0x023c 0x0540 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA2__USDHC1_DATA2                   0x0240 0x0544 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA2__SAI4_TX_DATA0                  0x0240 0x0544 0x0000 0x01 0x00
+#define IMX94_PAD_SD1_DATA2__PMIC_READY                     0x0240 0x0544 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA2__NETC_1588MUX_INOUT4            0x0240 0x0544 0x065c 0x03 0x01
+#define IMX94_PAD_SD1_DATA2__FLEXIO2_4_1_FLEXIO4            0x0240 0x0544 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA2__GPIO4_IO12                     0x0240 0x0544 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA2__FLEXPWM3_PWMB3                 0x0240 0x0544 0x06c4 0x06 0x01
+#define IMX94_PAD_SD1_DATA2__SINC1_EMCLK2                   0x0240 0x0544 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA3__USDHC1_DATA3                   0x0244 0x0548 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA3__SAI4_RX_DATA0                  0x0244 0x0548 0x0810 0x01 0x01
+#define IMX94_PAD_SD1_DATA3__NETC_1588MUX_INOUT5            0x0244 0x0548 0x0660 0x03 0x01
+#define IMX94_PAD_SD1_DATA3__FLEXIO2_4_1_FLEXIO5            0x0244 0x0548 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA3__GPIO4_IO13                     0x0244 0x0548 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA3__FLEXPWM3_PWMA2                 0x0244 0x0548 0x06b0 0x06 0x01
+#define IMX94_PAD_SD1_DATA3__SINC1_EMBIT2                   0x0244 0x0548 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA4__USDHC1_DATA4                   0x0248 0x054c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA4__SAI2_RX_DATA0                  0x0248 0x054c 0x07f0 0x01 0x02
+#define IMX94_PAD_SD1_DATA4__NETC_1588MUX_INOUT6            0x0248 0x054c 0x0664 0x03 0x01
+#define IMX94_PAD_SD1_DATA4__FLEXIO2_4_1_FLEXIO6            0x0248 0x054c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA4__GPIO4_IO14                     0x0248 0x054c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA4__FLEXPWM3_PWMB2                 0x0248 0x054c 0x06c0 0x06 0x01
+#define IMX94_PAD_SD1_DATA4__SINC1_EMCLK3                   0x0248 0x054c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA5__USDHC1_DATA5                   0x024c 0x0550 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA5__SAI2_TX_DATA0                  0x024c 0x0550 0x0000 0x01 0x00
+#define IMX94_PAD_SD1_DATA5__USDHC1_RESET_B                 0x024c 0x0550 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA5__NETC_1588MUX_INOUT7            0x024c 0x0550 0x0668 0x03 0x01
+#define IMX94_PAD_SD1_DATA5__FLEXIO2_4_1_FLEXIO7            0x024c 0x0550 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA5__GPIO4_IO15                     0x024c 0x0550 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA5__FLEXPWM3_PWMA1                 0x024c 0x0550 0x06ac 0x06 0x01
+#define IMX94_PAD_SD1_DATA5__SINC1_EMBIT3                   0x024c 0x0550 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA6__USDHC1_DATA6                   0x0250 0x0554 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA6__SAI2_TX_BCLK                   0x0250 0x0554 0x07f8 0x01 0x02
+#define IMX94_PAD_SD1_DATA6__USDHC1_CD_B                    0x0250 0x0554 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA6__NETC_1588MUX_INOUT8            0x0250 0x0554 0x066c 0x03 0x01
+#define IMX94_PAD_SD1_DATA6__FLEXIO2_4_1_FLEXIO8            0x0250 0x0554 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA6__GPIO4_IO16                     0x0250 0x0554 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA6__FLEXPWM3_PWMB1                 0x0250 0x0554 0x06bc 0x06 0x01
+#define IMX94_PAD_SD1_DATA6__SINC1_MOD_CLK0                 0x0250 0x0554 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_DATA7__USDHC1_DATA7                   0x0254 0x0558 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_DATA7__SAI2_RX_SYNC                   0x0254 0x0558 0x07f4 0x01 0x02
+#define IMX94_PAD_SD1_DATA7__USDHC1_WP                      0x0254 0x0558 0x0000 0x02 0x00
+#define IMX94_PAD_SD1_DATA7__NETC_1588MUX_INOUT9            0x0254 0x0558 0x0670 0x03 0x01
+#define IMX94_PAD_SD1_DATA7__FLEXIO2_4_1_FLEXIO9            0x0254 0x0558 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_DATA7__GPIO4_IO17                     0x0254 0x0558 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_DATA7__FLEXPWM3_PWMA0                 0x0254 0x0558 0x06a8 0x06 0x01
+#define IMX94_PAD_SD1_DATA7__SINC1_MOD_CLK1                 0x0254 0x0558 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD1_STROBE__USDHC1_STROBE                 0x0258 0x055c 0x0000 0x00 0x00
+#define IMX94_PAD_SD1_STROBE__SAI2_TX_SYNC                  0x0258 0x055c 0x07fc 0x01 0x02
+#define IMX94_PAD_SD1_STROBE__NETC_1588MUX_INOUT10          0x0258 0x055c 0x0674 0x03 0x01
+#define IMX94_PAD_SD1_STROBE__FLEXIO2_4_1_FLEXIO10          0x0258 0x055c 0x0000 0x04 0x00
+#define IMX94_PAD_SD1_STROBE__GPIO4_IO18                    0x0258 0x055c 0x0000 0x05 0x00
+#define IMX94_PAD_SD1_STROBE__FLEXPWM3_PWMB0                0x0258 0x055c 0x06b8 0x06 0x01
+#define IMX94_PAD_SD1_STROBE__SINC1_MOD_CLK2                0x0258 0x055c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT               0x025c 0x0560 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_VSELECT__SAI4_MCLK                    0x025c 0x0560 0x0808 0x01 0x01
+#define IMX94_PAD_SD2_VSELECT__USDHC2_WP                    0x025c 0x0560 0x0854 0x02 0x02
+#define IMX94_PAD_SD2_VSELECT__NETC_1588MUX_INOUT10         0x025c 0x0560 0x0674 0x03 0x02
+#define IMX94_PAD_SD2_VSELECT__FLEXIO2_4_1_FLEXIO11         0x025c 0x0560 0x0694 0x04 0x01
+#define IMX94_PAD_SD2_VSELECT__GPIO4_IO19                   0x025c 0x0560 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_VSELECT__EXT_CLK1                     0x025c 0x0560 0x0624 0x06 0x01
+#define IMX94_PAD_SD2_VSELECT__XBAR1_XBAR_INOUT12           0x025c 0x0560 0x088c 0x07 0x02
+
+#define IMX94_PAD_XSPI1_DATA0__XSPI1_A_DATA0                0x0260 0x0564 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA0__SAI2_RX_SYNC                 0x0260 0x0564 0x07f4 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA0__XSPI_SLV_DATA0               0x0260 0x0564 0x0908 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA0__FLEXIO1_3_3_FLEXIO0          0x0260 0x0564 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA0__GPIO7_IO16                   0x0260 0x0564 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA1__XSPI1_A_DATA1                0x0264 0x0568 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA1__SAI2_TX_SYNC                 0x0264 0x0568 0x07fc 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA1__XSPI_SLV_DATA1               0x0264 0x0568 0x090c 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA1__FLEXIO1_3_3_FLEXIO1          0x0264 0x0568 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA1__GPIO7_IO17                   0x0264 0x0568 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA2__XSPI1_A_DATA2                0x0268 0x056c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA2__SAI2_TX_DATA0                0x0268 0x056c 0x0000 0x01 0x00
+#define IMX94_PAD_XSPI1_DATA2__XSPI_SLV_DATA2               0x0268 0x056c 0x0910 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA2__FLEXIO1_3_3_FLEXIO2          0x0268 0x056c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA2__GPIO7_IO18                   0x0268 0x056c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA3__XSPI1_A_DATA3                0x026c 0x0570 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA3__SAI2_RX_DATA0                0x026c 0x0570 0x07f0 0x01 0x03
+#define IMX94_PAD_XSPI1_DATA3__SAI2_MCLK                    0x026c 0x0570 0x07e8 0x02 0x02
+#define IMX94_PAD_XSPI1_DATA3__XSPI_SLV_DATA3               0x026c 0x0570 0x0914 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA3__FLEXIO1_3_3_FLEXIO3          0x026c 0x0570 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA3__GPIO7_IO19                   0x026c 0x0570 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA4__XSPI1_A_DATA4                0x0270 0x0574 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA4__SAI4_RX_SYNC                 0x0270 0x0574 0x0814 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA4__XSPI_SLV_DATA4               0x0270 0x0574 0x0918 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA4__FLEXIO1_3_3_FLEXIO4          0x0270 0x0574 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA4__GPIO7_IO20                   0x0270 0x0574 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA5__XSPI1_A_DATA5                0x0274 0x0578 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA5__SAI4_TX_SYNC                 0x0274 0x0578 0x081c 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA5__XSPI_SLV_DATA5               0x0274 0x0578 0x091c 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA5__FLEXIO1_3_3_FLEXIO5          0x0274 0x0578 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA5__GPIO7_IO21                   0x0274 0x0578 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA6__XSPI1_A_DATA6                0x0278 0x057c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA6__SAI4_TX_DATA0                0x0278 0x057c 0x0000 0x01 0x00
+#define IMX94_PAD_XSPI1_DATA6__XSPI_SLV_DATA6               0x0278 0x057c 0x0920 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA6__FLEXIO1_3_3_FLEXIO6          0x0278 0x057c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA6__GPIO7_IO22                   0x0278 0x057c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DATA7__XSPI1_A_DATA7                0x027c 0x0580 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DATA7__SAI4_RX_DATA0                0x027c 0x0580 0x0810 0x01 0x02
+#define IMX94_PAD_XSPI1_DATA7__SAI4_MCLK                    0x027c 0x0580 0x0808 0x02 0x02
+#define IMX94_PAD_XSPI1_DATA7__XSPI_SLV_DATA7               0x027c 0x0580 0x0924 0x03 0x01
+#define IMX94_PAD_XSPI1_DATA7__FLEXIO1_3_3_FLEXIO7          0x027c 0x0580 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DATA7__GPIO7_IO23                   0x027c 0x0580 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_DQS__XSPI1_A_DQS                    0x0280 0x0584 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_DQS__SAI2_TX_BCLK                   0x0280 0x0584 0x07f8 0x01 0x03
+#define IMX94_PAD_XSPI1_DQS__XSPI_SLV_DQS                   0x0280 0x0584 0x0900 0x03 0x01
+#define IMX94_PAD_XSPI1_DQS__FLEXIO1_3_3_FLEXIO8            0x0280 0x0584 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_DQS__GPIO7_IO24                     0x0280 0x0584 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SCLK__XSPI1_A_SCLK                  0x0284 0x0588 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SCLK__SAI4_TX_BCLK                  0x0284 0x0588 0x0818 0x01 0x02
+#define IMX94_PAD_XSPI1_SCLK__XSPI_SLV_CLK                  0x0284 0x0588 0x0904 0x03 0x01
+#define IMX94_PAD_XSPI1_SCLK__FLEXIO1_3_3_FLEXIO9           0x0284 0x0588 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SCLK__GPIO7_IO25                    0x0284 0x0588 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SS0_B__XSPI1_A_SS0_B                0x0288 0x058c 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SS0_B__SAI4_RX_BCLK                 0x0288 0x058c 0x080c 0x01 0x02
+#define IMX94_PAD_XSPI1_SS0_B__XSPI_SLV_CS                  0x0288 0x058c 0x08fc 0x03 0x01
+#define IMX94_PAD_XSPI1_SS0_B__FLEXIO1_3_3_FLEXIO10         0x0288 0x058c 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SS0_B__GPIO7_IO26                   0x0288 0x058c 0x0000 0x05 0x00
+
+#define IMX94_PAD_XSPI1_SS1_B__XSPI1_A_SS1_B                0x028c 0x0590 0x0000 0x00 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SAI2_RX_BCLK                 0x028c 0x0590 0x07ec 0x01 0x02
+#define IMX94_PAD_XSPI1_SS1_B__FLEXPWM3_PWMX3               0x028c 0x0590 0x0000 0x03 0x00
+#define IMX94_PAD_XSPI1_SS1_B__FLEXIO1_3_3_FLEXIO11         0x028c 0x0590 0x0000 0x04 0x00
+#define IMX94_PAD_XSPI1_SS1_B__GPIO7_IO27                   0x028c 0x0590 0x0000 0x05 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SINC1_MOD_CLK0               0x028c 0x0590 0x0000 0x06 0x00
+#define IMX94_PAD_XSPI1_SS1_B__SINC_FILTER_GLUE1_BREAK      0x028c 0x0590 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CD_B__USDHC2_CD_B                     0x0290 0x0594 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CD_B__NETC_PINMUX_ETH4_RX_CTL         0x0290 0x0594 0x0634 0x01 0x01
+#define IMX94_PAD_SD2_CD_B__I3C2_SCL                        0x0290 0x0594 0x0720 0x02 0x03
+#define IMX94_PAD_SD2_CD_B__NETC_1588MUX_INOUT9             0x0290 0x0594 0x0670 0x03 0x02
+#define IMX94_PAD_SD2_CD_B__FLEXIO2_4_2_FLEXIO0             0x0290 0x0594 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CD_B__GPIO4_IO20                      0x0290 0x0594 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CD_B__XBAR1_XBAR_INOUT13              0x0290 0x0594 0x0890 0x06 0x02
+#define IMX94_PAD_SD2_CD_B__SINC2_EMCLK0                    0x0290 0x0594 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CLK__USDHC2_CLK                       0x0294 0x0598 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CLK__NETC_PINMUX_ETH4_TX_CLK          0x0294 0x0598 0x0648 0x01 0x01
+#define IMX94_PAD_SD2_CLK__I3C2_SDA                         0x0294 0x0598 0x0724 0x02 0x03
+#define IMX94_PAD_SD2_CLK__NETC_1588MUX_INOUT8              0x0294 0x0598 0x066c 0x03 0x02
+#define IMX94_PAD_SD2_CLK__FLEXIO2_4_2_FLEXIO1              0x0294 0x0598 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CLK__GPIO4_IO21                       0x0294 0x0598 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CLK__OBSERVE0                         0x0294 0x0598 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_CLK__SINC2_EMBIT0                     0x0294 0x0598 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_CMD__USDHC2_CMD                       0x0298 0x059c 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_CMD__NETC_PINMUX_ETH4_TX_CTL          0x0298 0x059c 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_CMD__I3C2_PUR                         0x0298 0x059c 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_CMD__I3C2_PUR_B                       0x0298 0x059c 0x0000 0x03 0x00
+#define IMX94_PAD_SD2_CMD__FLEXIO2_4_2_FLEXIO2              0x0298 0x059c 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_CMD__GPIO4_IO22                       0x0298 0x059c 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_CMD__OBSERVE1                         0x0298 0x059c 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_CMD__SINC2_EMCLK1                     0x0298 0x059c 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA0__USDHC2_DATA0                   0x029c 0x05a0 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA0__NETC_PINMUX_ETH4_TXD0          0x029c 0x05a0 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA0__CAN2_TX                        0x029c 0x05a0 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA0__NETC_1588MUX_INOUT7            0x029c 0x05a0 0x0668 0x03 0x02
+#define IMX94_PAD_SD2_DATA0__FLEXIO2_4_2_FLEXIO3            0x029c 0x05a0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA0__GPIO4_IO23                     0x029c 0x05a0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA0__OBSERVE2                       0x029c 0x05a0 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_DATA0__SINC2_EMBIT1                   0x029c 0x05a0 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA1__USDHC2_DATA1                   0x02a0 0x05a4 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA1__NETC_PINMUX_ETH4_TXD1          0x02a0 0x05a4 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA1__CAN2_RX                        0x02a0 0x05a4 0x067c 0x02 0x04
+#define IMX94_PAD_SD2_DATA1__NETC_1588MUX_INOUT6            0x02a0 0x05a4 0x0664 0x03 0x02
+#define IMX94_PAD_SD2_DATA1__FLEXIO2_4_2_FLEXIO4            0x02a0 0x05a4 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA1__GPIO4_IO24                     0x02a0 0x05a4 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA1__XBAR1_XBAR_INOUT14             0x02a0 0x05a4 0x0894 0x06 0x02
+#define IMX94_PAD_SD2_DATA1__SINC2_EMCLK2                   0x02a0 0x05a4 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA2__USDHC2_DATA2                   0x02a4 0x05a8 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA2__NETC_PINMUX_ETH4_TXD2          0x02a4 0x05a8 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA2__MQS2_RIGHT                     0x02a4 0x05a8 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA2__NETC_1588MUX_INOUT5            0x02a4 0x05a8 0x0660 0x03 0x02
+#define IMX94_PAD_SD2_DATA2__FLEXIO2_4_2_FLEXIO5            0x02a4 0x05a8 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA2__GPIO4_IO25                     0x02a4 0x05a8 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA2__XBAR1_XBAR_INOUT15             0x02a4 0x05a8 0x0898 0x06 0x01
+#define IMX94_PAD_SD2_DATA2__SINC2_EMBIT2                   0x02a4 0x05a8 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_DATA3__USDHC2_DATA3                   0x02a8 0x05ac 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_DATA3__NETC_PINMUX_ETH4_TXD3          0x02a8 0x05ac 0x0000 0x01 0x00
+#define IMX94_PAD_SD2_DATA3__MQS2_LEFT                      0x02a8 0x05ac 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_DATA3__LPTMR2_ALT0                    0x02a8 0x05ac 0x0780 0x03 0x01
+#define IMX94_PAD_SD2_DATA3__FLEXIO2_4_2_FLEXIO6            0x02a8 0x05ac 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_DATA3__GPIO4_IO26                     0x02a8 0x05ac 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_DATA3__XBAR1_XBAR_INOUT16             0x02a8 0x05ac 0x089c 0x06 0x01
+#define IMX94_PAD_SD2_DATA3__SINC2_EMCLK3                   0x02a8 0x05ac 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_RESET_B__USDHC2_RESET_B               0x02ac 0x05b0 0x0000 0x00 0x00
+#define IMX94_PAD_SD2_RESET_B__NETC_PINMUX_ETH4_RXD0        0x02ac 0x05b0 0x0638 0x01 0x01
+#define IMX94_PAD_SD2_RESET_B__NETC_1588MUX_INOUT4          0x02ac 0x05b0 0x065c 0x02 0x02
+#define IMX94_PAD_SD2_RESET_B__LPTMR2_ALT1                  0x02ac 0x05b0 0x0784 0x03 0x01
+#define IMX94_PAD_SD2_RESET_B__FLEXIO2_4_2_FLEXIO7          0x02ac 0x05b0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_RESET_B__GPIO4_IO27                   0x02ac 0x05b0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_RESET_B__XBAR1_XBAR_INOUT17           0x02ac 0x05b0 0x08a0 0x06 0x01
+#define IMX94_PAD_SD2_RESET_B__SINC2_EMBIT3                 0x02ac 0x05b0 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO0__USDHC2_WP                      0x02b0 0x05b4 0x0854 0x00 0x03
+#define IMX94_PAD_SD2_GPIO0__NETC_PINMUX_ETH4_RXD1          0x02b0 0x05b4 0x063c 0x01 0x01
+#define IMX94_PAD_SD2_GPIO0__NETC_1588MUX_INOUT3            0x02b0 0x05b4 0x0658 0x03 0x02
+#define IMX94_PAD_SD2_GPIO0__FLEXIO2_4_2_FLEXIO8            0x02b0 0x05b4 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO0__GPIO4_IO28                     0x02b0 0x05b4 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO0__XBAR1_XBAR_INOUT18             0x02b0 0x05b4 0x08a4 0x06 0x01
+#define IMX94_PAD_SD2_GPIO0__SINC2_MOD_CLK1                 0x02b0 0x05b4 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO1__LPTMR2_ALT2                    0x02b4 0x05b8 0x0788 0x00 0x01
+#define IMX94_PAD_SD2_GPIO1__NETC_PINMUX_ETH4_RXD2          0x02b4 0x05b8 0x0640 0x01 0x01
+#define IMX94_PAD_SD2_GPIO1__ECAT_CLK25                     0x02b4 0x05b8 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_GPIO1__NETC_1588MUX_INOUT2            0x02b4 0x05b8 0x0654 0x03 0x02
+#define IMX94_PAD_SD2_GPIO1__FLEXIO2_4_2_FLEXIO9            0x02b4 0x05b8 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO1__GPIO4_IO29                     0x02b4 0x05b8 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO1__XBAR1_XBAR_INOUT19             0x02b4 0x05b8 0x08a8 0x06 0x01
+#define IMX94_PAD_SD2_GPIO1__SINC2_MOD_CLK0                 0x02b4 0x05b8 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO2__NETC_PINMUX_ETH4_RXD3          0x02b8 0x05bc 0x0644 0x01 0x01
+#define IMX94_PAD_SD2_GPIO2__CAN5_TX                        0x02b8 0x05bc 0x0000 0x02 0x00
+#define IMX94_PAD_SD2_GPIO2__NETC_1588MUX_INOUT1            0x02b8 0x05bc 0x0650 0x03 0x02
+#define IMX94_PAD_SD2_GPIO2__FLEXIO2_4_2_FLEXIO10           0x02b8 0x05bc 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO2__GPIO4_IO30                     0x02b8 0x05bc 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO2__XBAR1_XBAR_INOUT20             0x02b8 0x05bc 0x08ac 0x06 0x01
+#define IMX94_PAD_SD2_GPIO2__SINC2_MOD_CLK2                 0x02b8 0x05bc 0x0000 0x07 0x00
+
+#define IMX94_PAD_SD2_GPIO3__NETC_PINMUX_ETH4_RX_CLK        0x02bc 0x05c0 0x0630 0x01 0x01
+#define IMX94_PAD_SD2_GPIO3__CAN5_RX                        0x02bc 0x05c0 0x0688 0x02 0x04
+#define IMX94_PAD_SD2_GPIO3__NETC_1588MUX_INOUT0            0x02bc 0x05c0 0x064c 0x03 0x02
+#define IMX94_PAD_SD2_GPIO3__FLEXIO2_4_2_FLEXIO11           0x02bc 0x05c0 0x0000 0x04 0x00
+#define IMX94_PAD_SD2_GPIO3__GPIO4_IO31                     0x02bc 0x05c0 0x0000 0x05 0x00
+#define IMX94_PAD_SD2_GPIO3__XBAR1_XBAR_INOUT21             0x02bc 0x05c0 0x0000 0x06 0x00
+#define IMX94_PAD_SD2_GPIO3__SINC_FILTER_GLUE2_BREAK        0x02bc 0x05c0 0x0000 0x07 0x00
+
+#define IMX94_PAD_I2C1_SCL__LPI2C1_SCL                      0x02c0 0x05c4 0x0000 0x00 0x00
+#define IMX94_PAD_I2C1_SCL__I3C1_SCL                        0x02c0 0x05c4 0x0000 0x01 0x00
+#define IMX94_PAD_I2C1_SCL__LPUART1_DCD_B                   0x02c0 0x05c4 0x0000 0x02 0x00
+#define IMX94_PAD_I2C1_SCL__TPM2_CH0                        0x02c0 0x05c4 0x0000 0x03 0x00
+#define IMX94_PAD_I2C1_SCL__SAI1_RX_SYNC                    0x02c0 0x05c4 0x0000 0x04 0x00
+#define IMX94_PAD_I2C1_SCL__GPIO1_IO0                       0x02c0 0x05c4 0x0000 0x05 0x00
+
+#define IMX94_PAD_I2C1_SDA__LPI2C1_SDA                      0x02c4 0x05c8 0x0000 0x00 0x00
+#define IMX94_PAD_I2C1_SDA__I3C1_SDA                        0x02c4 0x05c8 0x0000 0x01 0x00
+#define IMX94_PAD_I2C1_SDA__LPUART1_RIN_B                   0x02c4 0x05c8 0x0000 0x02 0x00
+#define IMX94_PAD_I2C1_SDA__TPM2_CH1                        0x02c4 0x05c8 0x0000 0x03 0x00
+#define IMX94_PAD_I2C1_SDA__SAI1_RX_BCLK                    0x02c4 0x05c8 0x0000 0x04 0x00
+#define IMX94_PAD_I2C1_SDA__GPIO1_IO1                       0x02c4 0x05c8 0x0000 0x05 0x00
+
+#define IMX94_PAD_I2C2_SCL__LPI2C2_SCL                      0x02c8 0x05cc 0x0000 0x00 0x00
+#define IMX94_PAD_I2C2_SCL__I3C1_PUR                        0x02c8 0x05cc 0x0000 0x01 0x00
+#define IMX94_PAD_I2C2_SCL__LPUART2_DCD_B                   0x02c8 0x05cc 0x0000 0x02 0x00
+#define IMX94_PAD_I2C2_SCL__TPM2_CH2                        0x02c8 0x05cc 0x0000 0x03 0x00
+#define IMX94_PAD_I2C2_SCL__GPT1_CLK                        0x02c8 0x05cc 0x060c 0x04 0x00
+#define IMX94_PAD_I2C2_SCL__GPIO1_IO2                       0x02c8 0x05cc 0x0000 0x05 0x00
+#define IMX94_PAD_I2C2_SCL__I3C1_PUR_B                      0x02c8 0x05cc 0x0000 0x06 0x00
+#define IMX94_PAD_I2C2_SCL__LPIT1_TRIGGER0                  0x02c8 0x05cc 0x0000 0x07 0x00
+
+#define IMX94_PAD_I2C2_SDA__LPI2C2_SDA                      0x02cc 0x05d0 0x0000 0x00 0x00
+#define IMX94_PAD_I2C2_SDA__LPI2C1_HREQ                     0x02cc 0x05d0 0x0000 0x01 0x00
+#define IMX94_PAD_I2C2_SDA__LPUART2_RIN_B                   0x02cc 0x05d0 0x0000 0x02 0x00
+#define IMX94_PAD_I2C2_SDA__TPM2_CH3                        0x02cc 0x05d0 0x0000 0x03 0x00
+#define IMX94_PAD_I2C2_SDA__SAI1_MCLK                       0x02cc 0x05d0 0x0620 0x04 0x00
+#define IMX94_PAD_I2C2_SDA__GPIO1_IO3                       0x02cc 0x05d0 0x0000 0x05 0x00
+#define IMX94_PAD_I2C2_SDA__EWM_OUT_B                       0x02cc 0x05d0 0x0000 0x06 0x00
+#define IMX94_PAD_I2C2_SDA__LPIT1_TRIGGER1                  0x02cc 0x05d0 0x0000 0x07 0x00
+
+#define IMX94_PAD_UART1_RXD__LPUART1_RX                     0x02d0 0x05d4 0x0000 0x00 0x00
+#define IMX94_PAD_UART1_RXD__S400_UART_RX                   0x02d0 0x05d4 0x0000 0x01 0x00
+#define IMX94_PAD_UART1_RXD__LPSPI2_SIN                     0x02d0 0x05d4 0x0000 0x02 0x00
+#define IMX94_PAD_UART1_RXD__TPM1_CH0                       0x02d0 0x05d4 0x0000 0x03 0x00
+#define IMX94_PAD_UART1_RXD__GPT1_CAPTURE1                  0x02d0 0x05d4 0x0000 0x04 0x00
+#define IMX94_PAD_UART1_RXD__GPIO1_IO4                      0x02d0 0x05d4 0x0000 0x05 0x00
+
+#define IMX94_PAD_UART1_TXD__LPUART1_TX                     0x02d4 0x05d8 0x0000 0x00 0x00
+#define IMX94_PAD_UART1_TXD__S400_UART_TX                   0x02d4 0x05d8 0x0000 0x01 0x00
+#define IMX94_PAD_UART1_TXD__LPSPI2_PCS0                    0x02d4 0x05d8 0x0000 0x02 0x00
+#define IMX94_PAD_UART1_TXD__TPM1_CH1                       0x02d4 0x05d8 0x0000 0x03 0x00
+#define IMX94_PAD_UART1_TXD__GPT1_COMPARE1                  0x02d4 0x05d8 0x0000 0x04 0x00
+#define IMX94_PAD_UART1_TXD__GPIO1_IO5                      0x02d4 0x05d8 0x0000 0x05 0x00
+
+#define IMX94_PAD_UART2_RXD__LPUART2_RX                     0x02d8 0x05dc 0x0000 0x00 0x00
+#define IMX94_PAD_UART2_RXD__LPUART1_CTS_B                  0x02d8 0x05dc 0x0000 0x01 0x00
+#define IMX94_PAD_UART2_RXD__LPSPI2_SOUT                    0x02d8 0x05dc 0x0000 0x02 0x00
+#define IMX94_PAD_UART2_RXD__TPM1_CH2                       0x02d8 0x05dc 0x0000 0x03 0x00
+#define IMX94_PAD_UART2_RXD__SAI1_MCLK                      0x02d8 0x05dc 0x0620 0x04 0x01
+#define IMX94_PAD_UART2_RXD__GPIO1_IO6                      0x02d8 0x05dc 0x0000 0x05 0x00
+#define IMX94_PAD_UART2_RXD__GPT1_CLK                       0x02d8 0x05dc 0x060c 0x06 0x01
+#define IMX94_PAD_UART2_RXD__LPIT1_TRIGGER2                 0x02d8 0x05dc 0x0000 0x07 0x00
+
+#define IMX94_PAD_UART2_TXD__LPUART2_TX                     0x02dc 0x05e0 0x0000 0x00 0x00
+#define IMX94_PAD_UART2_TXD__LPUART1_RTS_B                  0x02dc 0x05e0 0x0000 0x01 0x00
+#define IMX94_PAD_UART2_TXD__LPSPI2_SCK                     0x02dc 0x05e0 0x0000 0x02 0x00
+#define IMX94_PAD_UART2_TXD__TPM1_CH3                       0x02dc 0x05e0 0x0000 0x03 0x00
+#define IMX94_PAD_UART2_TXD__GPIO1_IO7                      0x02dc 0x05e0 0x0000 0x05 0x00
+
+#define IMX94_PAD_PDM_CLK__PDM_CLK                          0x02e0 0x05e4 0x0000 0x00 0x00
+#define IMX94_PAD_PDM_CLK__MQS1_LEFT                        0x02e0 0x05e4 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_CLK__LPTMR1_ALT0                      0x02e0 0x05e4 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_CLK__GPIO1_IO8                        0x02e0 0x05e4 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_CLK__CAN1_TX                          0x02e0 0x05e4 0x0000 0x06 0x00
+#define IMX94_PAD_PDM_CLK__EWM_OUT_B                        0x02e0 0x05e4 0x0000 0x07 0x00
+
+#define IMX94_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0          0x02e4 0x05e8 0x0610 0x00 0x02
+#define IMX94_PAD_PDM_BIT_STREAM0__MQS1_RIGHT               0x02e4 0x05e8 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1              0x02e4 0x05e8 0x0000 0x02 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK              0x02e4 0x05e8 0x0000 0x03 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__LPTMR1_ALT1              0x02e4 0x05e8 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__GPIO1_IO9                0x02e4 0x05e8 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_BIT_STREAM0__CAN1_RX                  0x02e4 0x05e8 0x0608 0x06 0x00
+
+#define IMX94_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1          0x02e8 0x05ec 0x0614 0x00 0x03
+#define IMX94_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI             0x02e8 0x05ec 0x0000 0x01 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1              0x02e8 0x05ec 0x0000 0x02 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK              0x02e8 0x05ec 0x0000 0x03 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__LPTMR1_ALT2              0x02e8 0x05ec 0x0000 0x04 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__GPIO1_IO10               0x02e8 0x05ec 0x0000 0x05 0x00
+#define IMX94_PAD_PDM_BIT_STREAM1__EXT_CLK1                 0x02e8 0x05ec 0x0624 0x06 0x00
+
+#define IMX94_PAD_SAI1_TXFS__SAI1_TX_SYNC                   0x02ec 0x05f0 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXFS__SAI1_TX_DATA1                  0x02ec 0x05f0 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXFS__LPSPI1_PCS0                    0x02ec 0x05f0 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXFS__LPUART2_DTR_B                  0x02ec 0x05f0 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXFS__MQS1_LEFT                      0x02ec 0x05f0 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_TXFS__GPIO1_IO11                     0x02ec 0x05f0 0x0000 0x05 0x00
+#define IMX94_PAD_SAI1_TXFS__EWM_OUT_B                      0x02ec 0x05f0 0x0000 0x06 0x00
+
+#define IMX94_PAD_SAI1_TXC__SAI1_TX_BCLK                    0x02f0 0x05f4 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXC__LPUART2_CTS_B                   0x02f0 0x05f4 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXC__LPSPI1_SIN                      0x02f0 0x05f4 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXC__LPUART1_DSR_B                   0x02f0 0x05f4 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXC__CAN1_RX                         0x02f0 0x05f4 0x0608 0x04 0x01
+#define IMX94_PAD_SAI1_TXC__GPIO1_IO12                      0x02f0 0x05f4 0x0000 0x05 0x00
+
+#define IMX94_PAD_SAI1_TXD0__SAI1_TX_DATA0                  0x02f4 0x05f8 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_TXD0__LPUART2_RTS_B                  0x02f4 0x05f8 0x0000 0x01 0x00
+#define IMX94_PAD_SAI1_TXD0__LPSPI1_SCK                     0x02f4 0x05f8 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_TXD0__LPUART1_DTR_B                  0x02f4 0x05f8 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_TXD0__CAN1_TX                        0x02f4 0x05f8 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_TXD0__GPIO1_IO13                     0x02f4 0x05f8 0x0000 0x05 0x00
+
+#define IMX94_PAD_SAI1_RXD0__SAI1_RX_DATA0                  0x02f8 0x05fc 0x0000 0x00 0x00
+#define IMX94_PAD_SAI1_RXD0__SAI1_MCLK                      0x02f8 0x05fc 0x0620 0x01 0x02
+#define IMX94_PAD_SAI1_RXD0__LPSPI1_SOUT                    0x02f8 0x05fc 0x0000 0x02 0x00
+#define IMX94_PAD_SAI1_RXD0__LPUART2_DSR_B                  0x02f8 0x05fc 0x0000 0x03 0x00
+#define IMX94_PAD_SAI1_RXD0__MQS1_RIGHT                     0x02f8 0x05fc 0x0000 0x04 0x00
+#define IMX94_PAD_SAI1_RXD0__GPIO1_IO14                     0x02f8 0x05fc 0x0000 0x05 0x00
+#define IMX94_PAD_SAI1_RXD0__LPIT1_TRIGGER3                 0x02f8 0x05fc 0x0000 0x07 0x00
+
+#define IMX94_PAD_WDOG_ANY__WDOG_ANY                        0x02fc 0x0600 0x0000 0x00 0x00
+#define IMX94_PAD_WDOG_ANY__FCCU_EOUT1                      0x02fc 0x0600 0x0000 0x01 0x00
+#define IMX94_PAD_WDOG_ANY__GPIO1_IO15                      0x02fc 0x0600 0x0000 0x05 0x00
+#endif /* __DTS_IMX94_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx94-power.h b/arch/arm64/boot/dts/freescale/imx94-power.h
new file mode 100644
index 000000000000..5209afed60ed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94-power.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ *  Copyright 2024-2025 NXP
+ */
+
+#ifndef __IMX94_POWER_H
+#define __IMX94_POWER_H
+
+#define IMX94_PD_ANA		0
+#define IMX94_PD_AON		1
+#define IMX94_PD_BBSM		2
+#define IMX94_PD_M71		3
+#define IMX94_PD_CCMSRCGPC	4
+#define IMX94_PD_A55C0		5
+#define IMX94_PD_A55C1		6
+#define IMX94_PD_A55C2		7
+#define IMX94_PD_A55C3		8
+#define IMX94_PD_A55P		9
+#define IMX94_PD_DDR		10
+#define IMX94_PD_DISPLAY	11
+#define IMX94_PD_M70		12
+#define IMX94_PD_HSIO_TOP	13
+#define IMX94_PD_HSIO_WAON	14
+#define IMX94_PD_NETC		15
+#define IMX94_PD_NOC		16
+#define IMX94_PD_NPU		17
+#define IMX94_PD_WAKEUP		18
+
+#define IMX94_PERF_M33		0
+#define IMX94_PERF_M33S		1
+#define IMX94_PERF_WAKEUP	2
+#define IMX94_PERF_M70		3
+#define IMX94_PERF_M71		4
+#define IMX94_PERF_DRAM		5
+#define IMX94_PERF_HSIO		6
+#define IMX94_PERF_NPU		7
+#define IMX94_PERF_NOC		8
+#define IMX94_PERF_A55		9
+#define IMX94_PERF_DISP		10
+
+#endif /* __IMX94_POWER_H */
diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
new file mode 100644
index 000000000000..73184f03f8a3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -0,0 +1,1200 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "imx94-clock.h"
+#include "imx94-pinfunc.h"
+#include "imx94-power.h"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	osc_24m: clock-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "dummy";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	sai1_mclk: clock-sai1-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai1_mclk";
+	};
+
+	sai2_mclk: clock-sai2-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai2_mclk";
+	};
+
+	sai3_mclk: clock-sai3-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai3_mclk";
+	};
+
+	sai4_mclk: clock-sai4-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai4_mclk";
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>, <&mu2 5 1>;
+			shmem = <&scmi_buf0>, <&scmi_buf1>;
+			arm,max-rx-timeout-ms = <5000>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_sys_power: protocol@12 {
+				reg = <0x12>;
+			};
+
+			scmi_perf: protocol@13 {
+				reg = <0x13>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_iomuxc: protocol@19 {
+				reg = <0x19>;
+			};
+
+			scmi_bbm: protocol@81 {
+				reg = <0x81>;
+			};
+
+			scmi_misc: protocol@84 {
+				reg = <0x84>;
+			};
+		};
+	};
+
+	mqs1: mqs1 {
+		compatible = "fsl,imx943-aonmix-mqs";
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx943-wakeupmix-mqs";
+		status = "disabled";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		interrupt-parent = <&gic>;
+		arm,no-tick-in-suspend;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48060000 0 0xc0000>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-noncoherent;
+		interrupt-parent = <&gic>;
+
+		its: msi-controller@48040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0 0x48040000 0 0x20000>;
+			#msi-cells = <1>;
+			dma-noncoherent;
+			msi-controller;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x42000000 0x0 0x800000>;
+			ranges = <0x42000000 0x0 0x42000000 0x8000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx94-edma5", "fsl,imx95-edma5";
+				reg = <0x42000000 0x210000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts-extended = <&a55_irqsteer 0>, <&a55_irqsteer 1>,
+						      <&a55_irqsteer 2>, <&a55_irqsteer 3>,
+						      <&a55_irqsteer 4>, <&a55_irqsteer 5>,
+						      <&a55_irqsteer 6>, <&a55_irqsteer 7>,
+						      <&a55_irqsteer 8>, <&a55_irqsteer 9>,
+						      <&a55_irqsteer 10>, <&a55_irqsteer 11>,
+						      <&a55_irqsteer 12>, <&a55_irqsteer 13>,
+						      <&a55_irqsteer 14>, <&a55_irqsteer 15>,
+						      <&a55_irqsteer 16>, <&a55_irqsteer 17>,
+						      <&a55_irqsteer 18>, <&a55_irqsteer 19>,
+						      <&a55_irqsteer 20>, <&a55_irqsteer 21>,
+						      <&a55_irqsteer 22>, <&a55_irqsteer 23>,
+						      <&a55_irqsteer 24>, <&a55_irqsteer 25>,
+						      <&a55_irqsteer 26>, <&a55_irqsteer 27>,
+						      <&a55_irqsteer 28>, <&a55_irqsteer 29>,
+						      <&a55_irqsteer 30>, <&a55_irqsteer 31>,
+						      <&a55_irqsteer 64>, <&a55_irqsteer 65>,
+						      <&a55_irqsteer 66>, <&a55_irqsteer 67>,
+						      <&a55_irqsteer 68>, <&a55_irqsteer 69>,
+						      <&a55_irqsteer 70>, <&a55_irqsteer 71>,
+						      <&a55_irqsteer 72>, <&a55_irqsteer 73>,
+						      <&a55_irqsteer 74>, <&a55_irqsteer 75>,
+						      <&a55_irqsteer 76>, <&a55_irqsteer 77>,
+						      <&a55_irqsteer 78>, <&a55_irqsteer 79>,
+						      <&a55_irqsteer 80>, <&a55_irqsteer 81>,
+						      <&a55_irqsteer 82>, <&a55_irqsteer 83>,
+						      <&a55_irqsteer 84>, <&a55_irqsteer 85>,
+						      <&a55_irqsteer 86>, <&a55_irqsteer 87>,
+						      <&a55_irqsteer 88>, <&a55_irqsteer 89>,
+						      <&a55_irqsteer 90>, <&a55_irqsteer 91>,
+						      <&a55_irqsteer 92>, <&a55_irqsteer 93>,
+						      <&a55_irqsteer 94>, <&a55_irqsteer 95>,
+						      <&gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			mu10: mailbox@42430000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42430000 0x10000>;
+				interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			i3c2: i3c@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_I3C2SLOW>,
+					 <&dummy>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C3>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 5 0 0>, <&edma2 6 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C4>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 4 0 0>, <&edma4 5 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI3>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 7 0 0>, <&edma2 8 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI4>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 6 0 0>, <&edma4 7 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART3>;
+				clock-names = "ipg";
+				dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 9 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART4>;
+				clock-names = "ipg";
+				dmas = <&edma4 10 0 FSL_EDMA_RX>, <&edma4 9 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART5>;
+				clock-names = "ipg";
+				dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 11 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART6>;
+				clock-names = "ipg";
+				dmas = <&edma4 12 0 FSL_EDMA_RX>, <&edma4 11 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN2>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN2>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan3: can@425e0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425e0000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN3>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN3>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan4: can@425f0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x425f0000 0x10000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN4>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN4>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			flexcan5: can@42600000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x42600000 0x10000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_CAN5>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN5>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			sai2: sai@42650000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI2>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 30 0 FSL_EDMA_RX>, <&edma2 29 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI3>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 32 0 FSL_EDMA_RX>, <&edma2 31 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai4: sai@42670000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x42670000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI4>, <&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 36 0 FSL_EDMA_RX>, <&edma2 35 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART7>;
+				clock-names = "ipg";
+				dmas = <&edma2 46 0 FSL_EDMA_RX>, <&edma2 45 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART8>;
+				clock-names = "ipg";
+				dmas = <&edma4 39 0 FSL_EDMA_RX>, <&edma4 38 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C5>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 37 0 0>, <&edma2 38 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C6>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 30 0 0>, <&edma4 31 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C7>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 39 0 0>, <&edma2 40 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C8>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 32 0 0>, <&edma4 33 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI5>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 41 0 0>, <&edma2 42 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI6>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 34 0 0>, <&edma4 35 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI7>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 43 0 0>, <&edma2 44 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI8>,
+					 <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma4 36 0 0>, <&edma4 37 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			mu11: mailbox@42730000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42730000 0x10000>;
+				interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			edma4: dma-controller@42df0000 {
+				compatible = "fsl,imx94-edma5", "fsl,imx95-edma5";
+				reg = <0x42df0000 0x210000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts-extended = <&a55_irqsteer 128>, <&a55_irqsteer 129>,
+						      <&a55_irqsteer 130>, <&a55_irqsteer 131>,
+						      <&a55_irqsteer 132>, <&a55_irqsteer 133>,
+						      <&a55_irqsteer 134>, <&a55_irqsteer 135>,
+						      <&a55_irqsteer 136>, <&a55_irqsteer 137>,
+						      <&a55_irqsteer 138>, <&a55_irqsteer 139>,
+						      <&a55_irqsteer 140>, <&a55_irqsteer 141>,
+						      <&a55_irqsteer 142>, <&a55_irqsteer 143>,
+						      <&a55_irqsteer 144>, <&a55_irqsteer 145>,
+						      <&a55_irqsteer 146>, <&a55_irqsteer 147>,
+						      <&a55_irqsteer 148>, <&a55_irqsteer 149>,
+						      <&a55_irqsteer 150>, <&a55_irqsteer 151>,
+						      <&a55_irqsteer 152>, <&a55_irqsteer 153>,
+						      <&a55_irqsteer 154>, <&a55_irqsteer 155>,
+						      <&a55_irqsteer 156>, <&a55_irqsteer 157>,
+						      <&a55_irqsteer 158>, <&a55_irqsteer 159>,
+						      <&a55_irqsteer 192>, <&a55_irqsteer 193>,
+						      <&a55_irqsteer 194>, <&a55_irqsteer 195>,
+						      <&a55_irqsteer 196>, <&a55_irqsteer 197>,
+						      <&a55_irqsteer 198>, <&a55_irqsteer 199>,
+						      <&a55_irqsteer 200>, <&a55_irqsteer 201>,
+						      <&a55_irqsteer 202>, <&a55_irqsteer 203>,
+						      <&a55_irqsteer 204>, <&a55_irqsteer 205>,
+						      <&a55_irqsteer 206>, <&a55_irqsteer 207>,
+						      <&a55_irqsteer 208>, <&a55_irqsteer 209>,
+						      <&a55_irqsteer 210>, <&a55_irqsteer 211>,
+						      <&a55_irqsteer 212>, <&a55_irqsteer 213>,
+						      <&a55_irqsteer 214>, <&a55_irqsteer 215>,
+						      <&a55_irqsteer 216>, <&a55_irqsteer 217>,
+						      <&a55_irqsteer 218>, <&a55_irqsteer 219>,
+						      <&a55_irqsteer 220>, <&a55_irqsteer 221>,
+						      <&a55_irqsteer 222>, <&a55_irqsteer 223>,
+						      <&gic GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0 0x42800000 0 0x800000>;
+			ranges = <0x42800000 0x0 0x42800000 0x800000>,
+				 <0x28000000 0x0 0x28000000 0x1000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC1>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC2>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <200000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@42880000 {
+				compatible = "fsl,imx94-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42880000 0x10000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX94_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX94_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_USDHC3>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <200000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			lpuart9: serial@42a50000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a50000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART10>;
+				clock-names = "ipg";
+				dmas = <&edma2 51 0 FSL_EDMA_RX>, <&edma2 50 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart10: serial@42a60000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a60000 0x1000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART10>;
+				clock-names = "ipg";
+				dmas = <&edma4 47 0 FSL_EDMA_RX>, <&edma4 46 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart11: serial@42a70000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a70000 0x1000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART11>;
+				clock-names = "ipg";
+				dmas = <&edma2 53 0 FSL_EDMA_RX>, <&edma2 52 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart12: serial@42a80000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42a80000 0x1000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART12>;
+				clock-names = "ipg";
+				dmas = <&edma4 49 0 FSL_EDMA_RX>, <&edma4 48 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu12: mailbox@42ac0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42ac0000 0x10000>;
+				interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu13: mailbox@42ae0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42ae0000 0x10000>;
+				interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu14: mailbox@42b00000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b00000 0x10000>;
+				interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu15: mailbox@42b20000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b20000 0x10000>;
+				interrupts = <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu16: mailbox@42b40000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b40000 0x10000>;
+				interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu17: mailbox@42b60000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x42b60000 0x10000>;
+				interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43810000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 4 32>;
+			ngpios = <32>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43820000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 36 26>;
+			ngpios = <26>;
+		};
+
+		gpio4: gpio@43840000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43840000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 62 4>, <&scmi_iomuxc 4 0 4>,
+				      <&scmi_iomuxc 8 140 12>, <&scmi_iomuxc 20 164 12>;
+			ngpios = <32>;
+		};
+
+		gpio5: gpio@43850000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43850000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 108 32>;
+			ngpios = <32>;
+		};
+
+		gpio6: gpio@43860000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43860000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 66 32>;
+			ngpios = <32>;
+		};
+
+		gpio7: gpio@43870000 {
+			compatible = "fsl,imx94-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43870000 0x0 0x1000>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&scmi_iomuxc 0 98 10>, <&scmi_iomuxc 16 152 12>;
+			gpio-reserved-ranges = <10 6>;
+			ngpios = <28>;
+		};
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x44000000 0x0 0x800000>;
+			ranges = <0x44000000 0x0 0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx94-edma3", "fsl,imx93-edma3";
+				reg = <0x44000000 0x210000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "dma";
+				#dma-cells = <3>;
+				dma-channels = <32>;
+			};
+
+			mu1: mailbox@44220000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x44220000 0x10000>;
+				interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,imx94-sysctr-timer", "nxp,imx95-sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx94-pwm", "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx94-pwm", "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x1000>;
+				clocks = <&scmi_clk IMX94_CLK_TPM2>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c1: i3c@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+					 <&scmi_clk IMX94_CLK_I3C1SLOW>,
+					 <&dummy>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C1>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx94-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPI2C2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 16 0 0>, <&edma1 17 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				compatible = "fsl,imx94-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX94_CLK_LPSPI2>,
+					 <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 18 0 0>, <&edma1 19 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART1>;
+				clock-names = "ipg";
+				dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx94-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_LPUART2>;
+				clock-names = "ipg";
+				dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+					 <&scmi_clk IMX94_CLK_CAN1>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&scmi_clk IMX94_CLK_CAN1>;
+				assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+				assigned-clock-rates = <80000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				status = "disabled";
+			};
+
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx94-sai", "fsl,imx95-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>, <&dummy>,
+					<&scmi_clk IMX94_CLK_SAI1>, <&dummy>,
+					<&dummy>, <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx943-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+					 <&scmi_clk IMX94_CLK_PDM>,
+					 <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+					 <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+					 <&dummy>;
+				clock-names = "ipg_clk", "ipg_clk_app",
+					      "pll8k", "pll11k", "clkext3";
+				dmas = <&edma1 6 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>;
+				dma-names = "rx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx94-adc", "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_ADC>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			mu2: mailbox@445b0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445b0000 0x1000>;
+				ranges;
+				interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#mbox-cells = <2>;
+
+				sram0: sram@445b1000 {
+					compatible = "mmio-sram";
+					reg = <0x445b1000 0x400>;
+					ranges = <0x0 0x445b1000 0x400>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scmi_buf0: scmi-sram-section@0 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x0 0x80>;
+					};
+
+					scmi_buf1: scmi-sram-section@80 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x80 0x80>;
+					};
+				};
+			};
+
+			mu3: mailbox@445d0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445d0000 0x10000>;
+				interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu4: mailbox@445f0000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x445f0000 0x10000>;
+				interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu6: mailbox@44630000 {
+				compatible = "fsl,imx94-mu", "fsl,imx95-mu";
+				reg = <0x44630000 0x10000>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			a55_irqsteer: interrupt-controller@446a0000 {
+				compatible = "fsl,imx94-irqsteer", "fsl,imx-irqsteer";
+				reg = <0x446a0000 0x1000>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSAON>;
+				clock-names = "ipg";
+				fsl,channel = <0>;
+				fsl,num-irqs = <960>;
+			};
+		};
+
+		aips4: bus@49000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x49000000 0x0 0x800000>;
+			ranges = <0x49000000 0x0 0x49000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			wdog3: watchdog@49220000 {
+				compatible = "fsl,imx94-wdt", "fsl,imx93-wdt";
+				reg = <0x49220000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX94_CLK_BUSWAKEUP>;
+				timeout-sec = <40>;
+				fsl,ext-reset-output;
+				status = "disabled";
+			};
+		};
+
+		ddr-pmu@4e090dc0 {
+			compatible = "fsl,imx94-ddr-pmu", "fsl,imx93-ddr-pmu";
+			reg = <0x0 0x4e090dc0 0x0 0x200>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
new file mode 100644
index 000000000000..c8c3eff9df1a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024-2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx943.dtsi"
+
+/ {
+	compatible = "fsl,imx943-evk", "fsl,imx94";
+	model = "NXP i.MX943 EVK board";
+
+	aliases {
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c5 = &lpi2c6;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+	};
+
+	bt_sco_codec: bt-sco-codec {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	dmic: dmic {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_SD2_3V3";
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio_pwr: regulator-wm8962-pwr {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-pwr";
+		gpio = <&pcal6416_i2c3_u171 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,bitclock-master = <&btcpu>;
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,name = "bt-sco-audio";
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+
+		btcpu: simple-audio-card,cpu {
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+			sound-dai = <&sai3>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			format = "i2s";
+			link-name = "micfil hifi";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		audio-codec = <&wm8962>;
+		audio-cpu = <&sai1>;
+		audio-routing = "Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"IN1R", "AMIC";
+		hp-det-gpio = <&pcal6416_i2c3_u48 14 GPIO_ACTIVE_HIGH>;
+		model = "wm8962-audio";
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9670_i2c3: gpio@23 {
+		compatible = "nxp,pca9670";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	pca9548_i2c3: i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wm8962: codec@1a {
+				compatible = "wlf,wm8962";
+				reg = <0x1a>;
+				clocks = <&scmi_clk IMX94_CLK_SAI1>;
+				AVDD-supply = <&reg_audio_pwr>;
+				CPVDD-supply = <&reg_audio_pwr>;
+				DBVDD-supply = <&reg_audio_pwr>;
+				DCVDD-supply = <&reg_audio_pwr>;
+				gpio-cfg = <
+					0x0000 /* 0:Default */
+					0x0000 /* 1:Default */
+					0x0000 /* 2:FN_DMICCLK */
+					0x0000 /* 3:Default */
+					0x0000 /* 4:FN_DMICCDAT */
+					0x0000 /* 5:Default */
+				>;
+				MICVDD-supply = <&reg_audio_pwr>;
+				PLLVDD-supply = <&reg_audio_pwr>;
+				SPKVDD1-supply = <&reg_audio_pwr>;
+				SPKVDD2-supply = <&reg_audio_pwr>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c3_u46: gpio@20 {
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				sd-card-on-hog {
+					gpios = <13 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+			};
+
+			pcal6416_i2c3_u171: gpio@21 {
+				compatible = "nxp,pcal6416";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				audio-pwren-hog {
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+
+				mqs-mic-sel-hog {
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-low;
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c3_u48: gpio@20 {
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio3>;
+				interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				pinctrl-0 = <&pinctrl_ioexpander_int>;
+				pinctrl-names = "default";
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6408_i2c3_u172: gpio@20 {
+				compatible = "nxp,pcal6408";
+				reg = <0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio3>;
+				/* shared int pin with u48 */
+				interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpi2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9544_i2c6: i2c-mux@77 {
+		compatible = "nxp,pca9544";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c6_u50: gpio@21 {
+				compatible = "nxp,pcal6416";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6408_i2c6_u170: gpio@20 {
+				compatible = "nxp,pcal6408";
+				reg = <0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio4>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				pinctrl-0 = <&pinctrl_ioexpander_int2>;
+				pinctrl-names = "default";
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcal6416_i2c6_u44: gpio@20 {
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				/* pdm selection */
+				can-pdm-sel-hog {
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-low;
+				};
+
+				sai3-sel-hog {
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+
+				/* eMMC IOMUX selection */
+				sd1-sel-hog {
+					gpios = <0 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+
+				/* SD card IOMUX selection */
+				sd2-sel-hog {
+					gpios = <1 GPIO_ACTIVE_HIGH>;
+					gpio-hog;
+					output-high;
+				};
+			};
+		};
+	};
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&micfil {
+	assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX94_CLK_PDM>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <49152000>;
+	pinctrl-0 = <&pinctrl_pdm>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX94_CLK_SAI1>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX94_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+
+	pinctrl_ioexpander_int2: ioexpanderint2grp {
+		fsl,pins = <
+			IMX94_PAD_CCM_CLKO4__GPIO4_IO3		0x31e
+		>;
+	};
+
+	pinctrl_ioexpander_int: ioexpanderintgrp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO45__GPIO3_IO13		0x31e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO16__LPI2C3_SDA		0x40000b9e
+			IMX94_PAD_GPIO_IO17__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO18__LPI2C4_SDA		0x40000b9e
+			IMX94_PAD_GPIO_IO19__LPI2C4_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO29__LPI2C6_SDA		0x40000b9e
+			IMX94_PAD_GPIO_IO28__LPI2C6_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			IMX94_PAD_PDM_CLK__PDM_CLK			0x31e
+			IMX94_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0	0x31e
+			IMX94_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1	0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX94_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x31e
+			IMX94_PAD_SAI1_TXC__SAI1_TX_BCLK	0x31e
+			IMX94_PAD_SAI1_TXD0__SAI1_TX_DATA0	0x31e
+			IMX94_PAD_SAI1_RXD0__SAI1_RX_DATA0	0x31e
+			IMX94_PAD_I2C2_SDA__SAI1_MCLK		0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO42__SAI3_TX_BCLK	0x31e
+			IMX94_PAD_GPIO_IO56__SAI3_TX_SYNC	0x31e
+			IMX94_PAD_GPIO_IO46__SAI3_RX_DATA0	0x31e
+			IMX94_PAD_GPIO_IO47__SAI3_TX_DATA0	0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX94_PAD_UART1_TXD__LPUART1_TX		0x31e
+			IMX94_PAD_UART1_RXD__LPUART1_RX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x138e
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x138e
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x138e
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x138e
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x138e
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x138e
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x138e
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX94_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			IMX94_PAD_SD1_CMD__USDHC1_CMD		0x138e
+			IMX94_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			IMX94_PAD_SD1_DATA1__USDHC1_DATA1	0x138e
+			IMX94_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			IMX94_PAD_SD1_DATA3__USDHC1_DATA3	0x138e
+			IMX94_PAD_SD1_DATA4__USDHC1_DATA4	0x138e
+			IMX94_PAD_SD1_DATA5__USDHC1_DATA5	0x138e
+			IMX94_PAD_SD1_DATA6__USDHC1_DATA6	0x138e
+			IMX94_PAD_SD1_DATA7__USDHC1_DATA7	0x138e
+			IMX94_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x138e
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CD_B__GPIO4_IO20		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX94_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			IMX94_PAD_SD2_CMD__USDHC2_CMD		0x138e
+			IMX94_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			IMX94_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			IMX94_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			IMX94_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			IMX94_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: usdhc2regvmmcgrp {
+		fsl,pins = <
+			IMX94_PAD_SD2_RESET_B__GPIO4_IO27	0x31e
+		>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	bus-width = <4>;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx943.dtsi b/arch/arm64/boot/dts/freescale/imx943.dtsi
new file mode 100644
index 000000000000..45b8da758e87
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx943.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+#include "imx94.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l0>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l1>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l2>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			power-domains = <&scmi_perf IMX94_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l3>;
+		};
+
+		l2_cache_l0: l2-cache-l0 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l1: l2-cache-l1 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l2: l2-cache-l2 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l3: l2-cache-l3 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
new file mode 100644
index 000000000000..c1e245ecea9c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -0,0 +1,1185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/i3c/i3c.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+#define FALLING_EDGE		BIT(0)
+#define RISING_EDGE		BIT(1)
+
+#define BRD_SM_CTRL_SD3_WAKE		0x8000
+#define BRD_SM_CTRL_PCIE1_WAKE		0x8001
+#define BRD_SM_CTRL_BT_WAKE		0x8002
+#define BRD_SM_CTRL_PCIE2_WAKE		0x8003
+#define BRD_SM_CTRL_BUTTON		0x8004
+
+/ {
+	compatible = "fsl,imx95-15x15-evk", "fsl,imx95";
+	model = "NXP i.MX95 15X15 board";
+
+	aliases {
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart1;
+		serial4 = &lpuart5;
+	};
+
+	bt_sco_codec: bt-sco-codec {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		stdout-path = &lpuart1;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		fan-supply = <&reg_vcc_12v>;
+		#cooling-cells = <2>;
+		cooling-levels = <64 128 192 255>;
+		pwms = <&tpm6 0 4000000 PWM_POLARITY_INVERTED>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vref_1v8";
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-pwr";
+		gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_audio_switch1: regulator-audio-switch1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-switch1";
+		gpio = <&pcal6524 0 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can2-stby";
+		gpio = <&pcal6524 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "M.2-power";
+		gpio = <&pcal6524 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_SD2_3V3";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "WLAN_EN";
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&pcal6524 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+	};
+
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pcal6524 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vcc_12v: regulator-vcc-12v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VCC_12V";
+		gpio = <&pcal6524 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7F000000>;
+			reusable;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@88000000 {
+			reg = <0 0x88000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@88008000 {
+			reg = <0 0x88008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@88010000 {
+			reg = <0 0x88010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@88018000 {
+			reg = <0 0x88018000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@88020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x88020000 0 0x100000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@88220000 {
+			reg = <0 0x88220000 0 0x1000>;
+			no-map;
+		};
+
+		vpu_boot: vpu_boot@a0000000 {
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,bitclock-master = <&btcpu>;
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,name = "bt-sco-audio";
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+
+		btcpu: simple-audio-card,cpu {
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+			sound-dai = <&sai1>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			format = "i2s";
+			link-name = "micfil hifi";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		audio-codec = <&wm8962>;
+		audio-cpu = <&sai3>;
+		audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR",
+				"Ext Spk", "SPKOUTL", "Ext Spk", "SPKOUTR", "AMIC", "MICBIAS",
+				"IN3R", "AMIC", "IN1R", "AMIC";
+		hp-det-gpio = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		model = "wm8962-audio";
+		pinctrl-0 = <&pinctrl_hp>;
+		pinctrl-names = "default";
+	};
+
+	sound-xcvr {
+		compatible = "fsl,imx-audio-card";
+		model = "imx-audio-xcvr";
+
+		pri-dai-link {
+			link-name = "XCVR PCM";
+
+			cpu {
+				sound-dai = <&xcvr>;
+			};
+		};
+	};
+
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&pinctrl_usdhc3_pwrseq>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&enetc_port0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&enetc_port1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&i3c2 {
+	i2c-scl-hz = <400000>;
+	pinctrl-0 = <&pinctrl_i3c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9570: gpio@24 {
+		compatible = "nxp,pca9570";
+		reg = <0x24 0 (I2C_FILTER)>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "OUT1", "OUT2", "OUT3", "OUT4";
+	};
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	wm8962: codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000
+			0x0000
+			0x0000
+			0x0000
+			0x0000
+			0x0000
+		>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+	};
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_ptn5110>;
+		pinctrl-names = "default";
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_con_hs: endpoint {
+						remote-endpoint = <&usb3_data_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	pca9632: led-controller@62 {
+		compatible = "nxp,pca9632";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		nxp,inverted-out;
+
+		led_backlight0: led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_BACKLIGHT;
+			function-enumerator = <0>;
+		};
+
+		led_backlight1: led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_BACKLIGHT;
+			function-enumerator = <1>;
+		};
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpi2c6 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&micfil {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_PDM>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>, <393216000>, <361267200>, <49152000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_pdm>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mu7 {
+	status = "okay";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_bus0 {
+	msi-map = <0x00 &its 0x60 0x1>,	//ENETC0 PF
+		  <0x10 &its 0x61 0x1>, //ENETC0 VF0
+		  <0x20 &its 0x62 0x1>, //ENETC0 VF1
+		  <0x40 &its 0x63 0x1>, //ENETC1 PF
+		  <0x50 &its 0x65 0x1>, //ENETC1 VF0
+		  <0x60 &its 0x66 0x1>, //ENETC1 VF1
+		  <0x80 &its 0x64 0x1>, //ENETC2 PF
+		  <0xc0 &its 0x67 0x1>;
+	iommu-map = <0x0 &smmu 0x20 0x1>,
+		    <0x10 &smmu 0x21 0x1>,
+		    <0x20 &smmu 0x22 0x1>,
+		    <0x40 &smmu 0x23 0x1>,
+		    <0x50 &smmu 0x25 0x1>,
+		    <0x60 &smmu 0x26 0x1>,
+		    <0x80 &smmu 0x24 0x1>,
+		    <0xc0 &smmu 0x27 0x1>;
+};
+
+&netc_emdio {
+	pinctrl-0 = <&pinctrl_emdio>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&pcal6524 4 GPIO_ACTIVE_LOW>;
+		realtek,clkout-disable;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		reg = <2>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&pcal6524 5 GPIO_ACTIVE_LOW>;
+		realtek,clkout-disable;
+	};
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_m2_pwr>;
+	vpcie3v3aux-supply = <&reg_m2_pwr>;
+	supports-clkreq;
+	status = "okay";
+};
+
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_m2_pwr>;
+	status = "disabled";
+};
+
+&sai1 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI1>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>, <393216000>, <361267200>, <12288000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>, <393216000>, <361267200>, <12288000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC		0x50e
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x50e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x50e
+			IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x50e
+			IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x50e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x57e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x57e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x57e
+			IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO25__CAN2_TX				0x39e
+			IMX95_PAD_GPIO_IO27__CAN2_RX				0x39e
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO21__GPIO2_IO_BIT21			0x31e
+		>;
+	};
+
+	pinctrl_i3c2: i3c2grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_MDC__I3C2_SCL				0x40000186
+			IMX95_PAD_ENET1_MDIO__I3C2_SDA				0x40000186
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x40000b9e
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL		0x40000b9e
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO28__LPI2C3_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO29__LPI2C3_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO30__LPI2C4_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO31__LPI2C4_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO02__LPI2C6_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO03__LPI2C6_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_mipi_dsi_csi: mipidsigrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_DATA6__GPIO5_IO_BIT6			0x31e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31e
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x40000b1e
+			IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13			0x31e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK				0x31e
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0	0x31e
+		>;
+	};
+
+	pinctrl_ptn5110: ptn5110grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7			0x31e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0	0x31e
+			IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK		0x31e
+			IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC		0x31e
+			IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0	0x31e
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK		0x31e
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC		0x31e
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0	0x31e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1	0x31e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK		0x31e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC	0x31e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0	0x31e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1	0x31e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2	0x31e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3	0x31e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK		0x31e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO17__SAI3_MCLK				0x31e
+			IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK			0x31e
+			IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC			0x31e
+			IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0			0x31e
+			IMX95_PAD_GPIO_IO19__SAI3_TX_DATA_BIT0			0x31e
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO22__SPDIF_IN				0x3fe
+			IMX95_PAD_GPIO_IO23__SPDIF_OUT				0x3fe
+		>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <
+			IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27			0x51e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO08__TPM6_CH0				0x51e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX		0x31e
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX			0x31e
+			IMX95_PAD_DAP_TDI__LPUART5_RX				0x31e
+			IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B			0x31e
+			IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B			0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x15fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x13fe
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x13fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_pwrseq: usdhc3pwrseqgrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9			0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x15fe
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x13fe
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x13fe
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x13fe
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x13fe
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x13fe
+		>;
+	};
+};
+
+&scmi_misc {
+	nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE		1>,
+		       <BRD_SM_CTRL_PCIE1_WAKE		1>,
+		       <BRD_SM_CTRL_BT_WAKE		1>,
+		       <BRD_SM_CTRL_PCIE2_WAKE		1>,
+		       <BRD_SM_CTRL_BUTTON		1>;
+};
+
+&thermal_zones {
+	a55-thermal {
+		cooling-maps {
+			map1 {
+				cooling-device = <&fan0 0 1>;
+				trip = <&atrip2>;
+			};
+
+			map2 {
+				cooling-device = <&fan0 1 2>;
+				trip = <&atrip3>;
+			};
+
+			map3 {
+				cooling-device = <&fan0 2 3>;
+				trip = <&atrip4>;
+			};
+		};
+
+		trips {
+			atrip2: trip2 {
+				hysteresis = <2000>;
+				temperature = <55000>;
+				type = "active";
+			};
+
+			atrip3: trip3 {
+				hysteresis = <2000>;
+				temperature = <65000>;
+				type = "active";
+			};
+
+			atrip4: trip4 {
+				hysteresis = <2000>;
+				temperature = <75000>;
+				type = "active";
+			};
+		};
+	};
+
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			pf09_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf09_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		cooling-maps {
+			map0 {
+				cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						 <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				trip = <&pf5301_alert>;
+			};
+		};
+
+		trips {
+			pf5301_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5301_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			pf5302_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5302_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+&tpm3 {
+	pinctrl-0 = <&pinctrl_tpm3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tpm6 {
+	pinctrl-0 = <&pinctrl_tpm6>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_data_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usb3_phy {
+	orientation-switch;
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <100>;
+	status = "okay";
+
+	port {
+		usb3_data_ss: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	fsl,tuning-step = <1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	fsl,tuning-step = <1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&xcvr {
+	clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+		 <&scmi_clk IMX95_CLK_SPDIF>,
+		 <&dummy>,
+		 <&scmi_clk IMX95_CLK_AUDIOXCVR>,
+		 <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+		 <&scmi_clk IMX95_CLK_AUDIOPLL2>;
+	clock-names = "ipg", "phy", "spba", "pll_ipg", "pll8k", "pll11k";
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SPDIF>,
+			  <&scmi_clk IMX95_CLK_AUDIOXCVR>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+				 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+	assigned-clock-rates = <3932160000>, <3612672000>,
+			       <393216000>, <361267200>,
+			       <12288000>, <0>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_spdif>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
new file mode 100644
index 000000000000..808a9fe3ebb2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx95-19x19-evk.dts"
+
+/ {
+	sof_cpu: cm7-cpu@80000000 {
+		compatible = "fsl,imx95-cm7-sof";
+		reg = <0x0 0x80000000 0x0 0x6100000>;
+		reg-names = "sram";
+		memory-region = <&adma_res>;
+		memory-region-names = "dma";
+		mboxes = <&mu7 2 0>, <&mu7 2 1>, <&mu7 3 0>, <&mu7 3 1>;
+		mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
+
+		sai3_cpu: port {
+			sai3_cpu_ep: endpoint {
+				remote-endpoint = <&wm8962_ep>;
+			};
+		};
+	};
+
+	reserved-memory {
+		adma_res: memory@86100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x86100000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	sof-sound {
+		compatible = "audio-graph-card2";
+		links = <&sai3_cpu>;
+		label = "audio";
+		hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		widgets = "Headphone", "Headphones",
+			  "Microphone", "Headset Mic";
+		routing = "Headphones", "HPOUTL",
+			  "Headphones", "HPOUTR",
+			  "Headset Mic", "MICBIAS",
+			  "IN3R", "Headset Mic",
+			  "IN1R", "Headset Mic";
+	};
+
+	sound-wm8962 {
+		status = "disabled";
+	};
+
+};
+
+&edma2 {
+	/* channels 30 and 31 reserved for FW usage */
+	dma-channel-mask = <0xc0000000>, <0x0>;
+};
+
+&sai3 {
+	status = "disabled";
+};
+
+&wm8962 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>, <3612672000>,
+			       <393216000>, <361267200>,
+			       <12288000>;
+
+	port {
+		wm8962_ep: endpoint {
+			bitclock-master;
+			frame-master;
+			remote-endpoint = <&sai3_cpu_ep>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 6086cb7fa5a0..aaa0da55a22b 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
 #include "imx95.dtsi"
 
 #define FALLING_EDGE			1
@@ -22,6 +23,7 @@
 	compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
 
 	aliases {
+		ethernet0 = &enetc_port0;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -38,6 +40,7 @@
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		serial0 = &lpuart1;
+		serial4 = &lpuart5;
 	};
 
 	bt_sco_codec: audio-codec-bt-sco {
@@ -75,6 +78,29 @@
 		};
 	};
 
+	flexcan1_phy: can-phy0 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&i2c6_pcal6416 6 GPIO_ACTIVE_HIGH>;
+		standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_LOW>;
+	};
+
+	flexcan2_phy: can-phy1 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&i2c4_gpio_expander_21 4 GPIO_ACTIVE_HIGH>;
+		standby-gpios = <&i2c4_gpio_expander_21 3 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vref_1v8: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-max-microvolt = <3300000>;
@@ -110,6 +136,13 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&i2c7_pcal6524 20 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		/*
+		 * M.2 device only can be enabled(W_DISABLE1#) after all Power
+		 * Rails reach their minimum operating voltage (PCI Express M.2
+		 * Specification r5.1 3.1.4 Power-up Timing).
+		 * Set a delay equal to the max value of Tsettle here.
+		 */
+		startup-delay-us = <5000>;
 	};
 
 	reg_pcie0: regulator-pcie {
@@ -143,6 +176,15 @@
 		off-on-delay-us = <12000>;
 	};
 
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&i2c7_pcal6524 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	sound-bt-sco {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "bt-sco-audio";
@@ -182,7 +224,7 @@
 		model = "wm8962-audio";
 		audio-cpu = <&sai3>;
 		audio-codec = <&wm8962>;
-		hp-det-gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
 		audio-routing = "Headphone Jack", "HPOUTL",
 				"Headphone Jack", "HPOUTR",
 				"Ext Spk", "SPKOUTL",
@@ -193,6 +235,33 @@
 	};
 };
 
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&enetc_port0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	phys = <&flexcan1_phy>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	phys = <&flexcan2_phy>;
+	status = "okay";
+};
+
 &flexspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexspi1>;
@@ -212,6 +281,50 @@
 	};
 };
 
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	adp5585: io-expander@34 {
+		compatible = "adi,adp5585-00", "adi,adp5585";
+		reg = <0x34>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-reserved-ranges = <5 1>;
+		#pwm-cells = <3>;
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	i2c3_gpio_expander_20: gpio@20 {
+		compatible = "nxp,pcal6408";
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0x20>;
+		vcc-supply = <&reg_3p3v>;
+	};
+
+	pca9632: pca9632@62 {
+		compatible = "nxp,pca9632";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led_baclklight: led@0 {
+			reg = <0>;
+			label = "backlight";
+			linux,default-trigger = "none";
+		};
+	};
+};
+
 &lpi2c4 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -308,6 +421,48 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <0>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_con_hs: endpoint {
+						remote-endpoint = <&usb3_data_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
 };
 
 &lpuart1 {
@@ -317,6 +472,24 @@
 	status = "okay";
 };
 
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&lpspi7 {
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi7>;
+	cs-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &micfil {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -338,22 +511,65 @@
 	status = "okay";
 };
 
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_emdio>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&i2c5_pcal6408 2 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		realtek,clkout-disable;
+	};
+};
+
+&netc_timer {
+	status = "okay";
+};
+
 &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	pinctrl-names = "default";
 	reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcie0>;
+	vpcie3v3aux-supply = <&reg_pcie0>;
+	supports-clkreq;
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_pcie0>;
+	status = "disabled";
+};
+
 &pcie1 {
 	pinctrl-0 = <&pinctrl_pcie1>;
 	pinctrl-names = "default";
 	reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_slot_pwr>;
+	vpcie3v3aux-supply = <&reg_slot_pwr>;
 	status = "okay";
 };
 
+&pcie1_ep {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_slot_pwr>;
+	status = "disabled";
+};
+
 &sai1 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -390,6 +606,57 @@
 	status = "okay";
 };
 
+&tpm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm3>;
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_data_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usb3_phy {
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <100>;
+	orientation-switch;
+	status = "okay";
+
+	port {
+		usb3_data_ss: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -429,6 +696,44 @@
 };
 
 &scmi_iomuxc {
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x50e
+			IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX			0x39e
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX		0x39e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO25__CAN2_TX				0x39e
+			IMX95_PAD_GPIO_IO27__CAN2_RX				0x39e
+		>;
+	};
+
 	pinctrl_flexspi1: flexspi1grp {
 		fsl,pins = <
 			IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B			0x3fe
@@ -469,6 +774,27 @@
 		>;
 	};
 
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x40000b9e
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL		0x40000b9e
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO00__LPI2C3_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO01__LPI2C3_SCL				0x40000b9e
+		>;
+	};
+
 	pinctrl_lpi2c4: lpi2c4grp {
 		fsl,pins = <
 			IMX95_PAD_GPIO_IO30__LPI2C4_SDA			0x40000b9e
@@ -497,6 +823,15 @@
 		>;
 	};
 
+	pinctrl_lpspi7: lpspi7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4		0x3fe
+			IMX95_PAD_GPIO_IO05__LPSPI7_SIN			0x3fe
+			IMX95_PAD_GPIO_IO06__LPSPI7_SOUT		0x3fe
+			IMX95_PAD_GPIO_IO07__LPSPI7_SCK			0x3fe
+		>;
+	};
+
 	pinctrl_pcie0: pcie0grp {
 		fsl,pins = <
 			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x4000031e
@@ -557,6 +892,12 @@
 		>;
 	};
 
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO12__TPM3_CH2			0x51e
+		>;
+	};
+
 	pinctrl_tpm6: tpm6grp {
 		fsl,pins = <
 			IMX95_PAD_GPIO_IO19__TPM6_CH2			0x51e
@@ -570,6 +911,15 @@
 		>;
 	};
 
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX		0x31e
+			IMX95_PAD_DAP_TDI__LPUART5_RX			0x31e
+			IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B		0x31e
+			IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B		0x31e
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
@@ -624,6 +974,12 @@
 		>;
 	};
 
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31e
+		>;
+	};
+
 	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 		fsl,pins = <
 			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0		0x31e
@@ -656,12 +1012,12 @@
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x15fe
-			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x13fe
-			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x13fe
-			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x13fe
-			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x13fe
-			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x13fe
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
 			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
 		>;
 	};
@@ -706,6 +1062,79 @@
 			};
 		};
 	};
+
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			pf09_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf09_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		cooling-maps {
+			map0 {
+				trip = <&pf5301_alert>;
+				cooling-device =
+					<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+
+		trips {
+			pf5301_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5301_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			pf5302_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5302_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
 };
 
 &tpm6 {
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts
new file mode 100644
index 000000000000..2b0ff232f680
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts
@@ -0,0 +1,695 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 NXP
+ * Copyright 2025 Marek Vasut <marek.vasut@mailbox.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+#define FALLING_EDGE			1
+#define RISING_EDGE			2
+
+#define BRD_SM_CTRL_SD3_WAKE		0x8000	/* PCAL6408A-0 */
+#define BRD_SM_CTRL_PCIE1_WAKE		0x8001	/* PCAL6408A-4 */
+#define BRD_SM_CTRL_BT_WAKE		0x8002	/* PCAL6408A-5 */
+#define BRD_SM_CTRL_PCIE2_WAKE		0x8003	/* PCAL6408A-6 */
+#define BRD_SM_CTRL_BUTTON		0x8004	/* PCAL6408A-7 */
+
+/ {
+	model = "i.MX 95 Verdin Evaluation Kit (EVK)";
+	compatible = "toradex,verdin-imx95-19x19-evk", "fsl,imx95";
+
+	aliases {
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+		ethernet2 = &enetc_port2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 4 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE_WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&i2c7_pcal6524 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VDD_SD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+	};
+
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&i2c7_pcal6524 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound-wm8904 {
+		compatible = "fsl,imx-audio-wm8904";
+		model = "wm8904-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8904>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"AMIC", "MICBIAS",
+			"IN2L", "AMIC";
+	};
+};
+
+&enetc_port0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexspi1_reset>;
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <200000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	status = "okay";
+
+	wm8904: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_1p8v>;
+		CPVDD-supply = <&reg_1p8v>;
+		DBVDD-supply = <&reg_1p8v>;
+		DCVDD-supply = <&reg_1p8v>;
+		MICVDD-supply = <&reg_1p8v>;
+	};
+};
+
+&lpi2c5 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	status = "okay";
+};
+
+&lpi2c6 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	status = "okay";
+};
+
+&lpi2c7 {
+	clock-frequency = <1000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c7>;
+	status = "okay";
+
+	i2c7_pcal6524: i2c7-gpio@23 {
+		compatible = "nxp,pcal6524";
+		reg = <0x23>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_pcal6524>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* Current measurement at SoM 5V power output */
+	hwmon@41 {
+		compatible = "ti,ina219";
+		reg = <0x41>;
+		shunt-resistor = <10000>;
+	};
+
+	/* Current measurement at Board power input */
+	hwmon@45 {
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <10000>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02";
+		reg = <0x50>;
+	};
+
+	ptn5110: tcpc@52 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_con_hs: endpoint {
+						remote-endpoint = <&usb3_data_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&lpuart1 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&mu7 {
+	status = "okay";
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_emdio>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		realtek,clkout-disable;
+	};
+};
+
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	reset-gpio = <&i2c7_pcal6524 17 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sai1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI1>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_data_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usb3_phy {
+	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+	orientation-switch;
+	status = "okay";
+
+	port {
+		usb3_data_ss: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	vmmc-supply = <&reg_pcie0>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&scmi_misc {
+	nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_PCIE1_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_BT_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_PCIE2_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_BUTTON	FALLING_EDGE>;
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4			0x3fe>;
+	};
+
+	pinctrl_emdio: emdiogrp {
+		fsl,pins =
+			<IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x57e>,
+			<IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x97e>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins =
+			<IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3	0x57e>,
+			<IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2	0x57e>,
+			<IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1	0x57e>,
+			<IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0	0x57e>,
+			<IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e>,
+			<IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e>,
+			<IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e>,
+			<IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e>,
+			<IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0	0x57e>,
+			<IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1	0x57e>,
+			<IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2	0x57e>,
+			<IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3	0x57e>;
+	};
+
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins =
+			<IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B		0x3fe>,
+			<IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK			0x3fe>,
+			<IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS			0x3fe>,
+			<IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0		0x3fe>,
+			<IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1		0x3fe>,
+			<IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2		0x3fe>,
+			<IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3		0x3fe>,
+			<IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4		0x3fe>,
+			<IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5		0x3fe>,
+			<IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6		0x3fe>,
+			<IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7		0x3fe>;
+	};
+
+	pinctrl_flexspi1_reset: flexspi1-reset-grp {
+		fsl,pins =
+			<IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11			0x3fe>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11			0x31e>;
+	};
+
+	pinctrl_i2c4_pcal6408: i2c4pcal6498grp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18			0x31e>;
+	};
+
+	pinctrl_i2c7_pcal6524: i2c7pcal6524grp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16			0x31e>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO30__LPI2C4_SDA			0x40000b9e>,
+			<IMX95_PAD_GPIO_IO31__LPI2C4_SCL			0x40000b9e>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO22__LPI2C5_SDA			0x40000b9e>,
+			<IMX95_PAD_GPIO_IO23__LPI2C5_SCL			0x40000b9e>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO02__LPI2C6_SDA			0x40000b9e>,
+			<IMX95_PAD_GPIO_IO03__LPI2C6_SCL			0x40000b9e>;
+	};
+
+	pinctrl_lpi2c7: lpi2c7grp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO08__LPI2C7_SDA			0x40000b9e>,
+			<IMX95_PAD_GPIO_IO09__LPI2C7_SCL			0x40000b9e>;
+	};
+
+	pinctrl_pcal6416: pcal6416grp {
+		fsl,pins =
+			<IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28			0x31e>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B	0x4000031e>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B	0x4000031e>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins =
+			<IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK				0x31e>,
+			<IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0	0x31e>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins =
+			<IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x31e>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins =
+			<IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0	0x31e>,
+			<IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK		0x31e>,
+			<IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC		0x31e>,
+			<IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0	0x31e>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins =
+			<IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK		0x31e>,
+			<IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC		0x31e>,
+			<IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0	0x31e>,
+			<IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1	0x31e>,
+			<IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK		0x31e>,
+			<IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC	0x31e>,
+			<IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0	0x31e>,
+			<IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1	0x31e>,
+			<IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2	0x31e>,
+			<IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3	0x31e>,
+			<IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK		0x31e>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO17__SAI3_MCLK			0x31e>,
+			<IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK		0x31e>,
+			<IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC		0x31e>,
+			<IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0		0x31e>,
+			<IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0		0x31e>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO19__TPM6_CH2			0x51e>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins =
+			<IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14		0x31e>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX	0x31e>,
+			<IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX	0x31e>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins =
+			<IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e>,
+			<IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e>,
+			<IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e>,
+			<IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e>,
+			<IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e>,
+			<IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e>,
+			<IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e>,
+			<IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e>,
+			<IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e>,
+			<IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e>,
+			<IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins =
+			<IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e>,
+			<IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e>,
+			<IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e>,
+			<IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e>,
+			<IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e>,
+			<IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e>,
+			<IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e>,
+			<IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e>,
+			<IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e>,
+			<IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e>,
+			<IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins =
+			<IMX95_PAD_SD1_CLK__USDHC1_CLK			0x15fe>,
+			<IMX95_PAD_SD1_CMD__USDHC1_CMD			0x13fe>,
+			<IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x13fe>,
+			<IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x13fe>,
+			<IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x13fe>,
+			<IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x13fe>,
+			<IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x13fe>,
+			<IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x13fe>,
+			<IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x13fe>,
+			<IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x13fe>,
+			<IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x15fe>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins =
+			<IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0		0x31e>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e>,
+			<IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e>,
+			<IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e>,
+			<IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e>,
+			<IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e>,
+			<IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e>,
+			<IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins =
+			<IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e>,
+			<IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e>,
+			<IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e>,
+			<IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e>,
+			<IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e>,
+			<IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e>,
+			<IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins =
+			<IMX95_PAD_SD2_CLK__USDHC2_CLK			0x15fe>,
+			<IMX95_PAD_SD2_CMD__USDHC2_CMD			0x13fe>,
+			<IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x13fe>,
+			<IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x13fe>,
+			<IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x13fe>,
+			<IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x13fe>,
+			<IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<IMX95_PAD_SD3_CLK__USDHC3_CLK			0x158e>,
+			<IMX95_PAD_SD3_CMD__USDHC3_CMD			0x138e>,
+			<IMX95_PAD_SD3_DATA0__USDHC3_DATA0		0x138e>,
+			<IMX95_PAD_SD3_DATA1__USDHC3_DATA1		0x138e>,
+			<IMX95_PAD_SD3_DATA2__USDHC3_DATA2		0x138e>,
+			<IMX95_PAD_SD3_DATA3__USDHC3_DATA3		0x138e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts
new file mode 100644
index 000000000000..26c2df9b1b60
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx95-phycore-fpsc.dtsi"
+
+/ {
+	compatible = "phytec,imx95-libra-rdk-fpsc",
+		"phytec,imx95-phycore-fpsc", "fsl,imx95";
+	model = "PHYTEC Libra i.MX95 RDK FPSC";
+
+	aliases {
+		can1 = &flexcan2;
+		can2 = &flexcan1;
+		ethernet0 = &enetc_port0;
+		serial0 = &lpuart7;
+		serial1 = &lpuart8;
+	};
+
+	chosen {
+		stdout-path = &lpuart7;
+	};
+
+	backlight_lvds0: backlight0 {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		power-supply = <&reg_vdd_12v0>;
+		status = "disabled";
+	};
+
+	transceiver1: can-phy {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
+	};
+
+	transceiver2: can-phy {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
+	};
+
+	panel0_lvds: panel-lvds0 {
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_vdd_3v3>;
+		status = "disabled";
+	};
+
+	reg_vdd_12v0: regulator-vdd-12v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "VDD_12V0";
+	};
+
+	reg_vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3";
+	};
+
+	reg_vdd_5v0: regulator-vdd-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VDD_5V0";
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&enetc_port2 {
+	managed = "in-band-status";
+	phy-handle = <&ethphy2>;
+	phy-mode = "10gbase-r";
+};
+
+/* CAN FD */
+&flexcan1 {
+	phys = <&transceiver1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	phys = <&transceiver2>;
+	status = "okay";
+};
+
+/* SPI-NOR */
+&flexspi1 {
+	pinctrl-0 = <&pinctrl_flexspi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi_nor: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <166000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "RGMII2_nINT", "GPIO4", "RTC_INT", "",
+			  "LVDS1_BL_EN";
+};
+
+&lpi2c1 {
+	temperature-sensor@4f {
+		compatible = "nxp,p3t1755";
+		reg = <0x4f>;
+		vs-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&lpi2c3 {
+	status = "okay";
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&lpi2c4 {
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3",
+				  "CSI1_CTRL4", "CSI2_CTRL1", "CSI2_CTRL2",
+				  "CSI2_CTRL3", "CSI2_CTRL4", "CLK_EN_AV",
+				  "nCAN2_EN", "nCAN1_EN", "PCIE1_nWAKE",
+				  "PCIE2_nWAKE", "PCIE2_nALERT_3V3",
+				  "UART1_BT_RS_SEL", "UART1_RS232_485_SEL";
+		vcc-supply = <&reg_vdd_1v8>;
+
+		uart1_bt_rs_sel: bt-rs-hog {
+			gpios = <14 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			line-name = "UART1_BT_RS_SEL";
+			output-low;
+		};
+	};
+};
+
+&lpi2c5 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vdd_1v8>;
+	};
+};
+
+/* Used for M33 debug */
+&lpuart2 {
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	pinctrl-names = "default";
+};
+
+/* A-55 debug UART */
+&lpuart7 {
+	status = "okay";
+};
+
+/* RS232/RS485/BT */
+&lpuart8 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&netc_emdio { /* RGMII2 */
+	ethphy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		enet-phy-lane-no-swap;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+
+	ethphy2: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x8>;
+		max-speed = <10000>; /* 10Gbit/s */
+		status = "disabled";
+	};
+};
+
+&pcie0 {
+	reset-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&pcie1 {
+	reset-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&rv3028 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rtc>;
+	interrupt-parent = <&gpio2>;
+	interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+	aux-voltage-chargeable = <1>;
+	wakeup-source;
+	trickle-resistor-ohms = <3000>;
+};
+
+&scmi_iomuxc {
+	pinctrl_lpuart2: lpuart2grp { /* FPSC proprietary */
+		fsl,pins = <
+			IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX	0x31e
+			IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX	0x31e
+		>;
+	};
+
+	pinctrl_lvds0: lvds0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO20__GPIO2_IO_BIT20	0x31e
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18	0x31e
+		>;
+	};
+
+	pinctrl_tpm4: tpm4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO21__TPM4_CH1	0x51e
+		>;
+	};
+};
+
+&tpm4 {
+	pinctrl-0 = <&pinctrl_tpm4>;
+	pinctrl-names = "default";
+};
+
+&usb3 {
+	fsl,over-current-active-low;
+	fsl,power-active-low;
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb3_phy {
+	vbus-supply = <&reg_vdd_5v0>;
+	status = "okay";
+};
+
+/* uSD Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi b/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi
new file mode 100644
index 000000000000..7519d5bd06ba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx95.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX95 FPSC";
+	compatible = "phytec,imx95-phycore-fpsc", "fsl,imx95";
+
+	aliases {
+		ethernet1 = &enetc_port1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c5;
+		i2c3 = &lpi2c3;
+		i2c4 = &lpi2c4;
+		i2c5 = &lpi2c1;
+		rtc0 = &rv3028;
+		rtc1 = &scmi_bbm;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
+	};
+
+	reg_nvcc_aon: regulator-nvcc-aon {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_IO";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDDSW_SD2";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			reusable;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&enetc_port0 { /* FPSC RGMII2 */
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	pinctrl-names = "default";
+};
+
+&enetc_port1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan1 { /* FPSC CAN1 */
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 { /* FPSC CAN2 */
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&flexspi1 { /* FPSC QSPI */
+	pinctrl-0 = <&pinctrl_flexspi>;
+	pinctrl-names = "default";
+};
+
+&gpio1 { /* FPSC GPIO */
+	gpio-line-names = "", "", "", "", "GPIO2",
+			  "GPIO1", "", "", "", "",
+			  "PCIE1_nPERST", "USB1_PWR_EN", "GPIO3", "USB2_PWR_EN", "PCIE2_nPERST";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio2 { /* FPSC GPIO */
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "RGMII2_nINT", "GPIO4";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	pinctrl-names = "default";
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "SD2_RESET_B";
+};
+
+&gpio4 {
+	gpio-line-names = "ENET2_nINT";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "",
+			  "", "", "", "", "",
+			  "", "", "", "USB1_OC", "USB2_OC";
+};
+
+&lpi2c1 { /* FPSC I2C5 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	dram_sense: temperature-sensor@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	emmc_sense: temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	ethphy_sense: temperature-sensor@4a {
+		compatible = "ti,tmp102";
+		reg = <0x4a>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	pmic_sense: temperature-sensor@4b {
+		compatible = "ti,tmp102";
+		reg = <0x4b>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	/* User EEPROM */
+	eeprom@50 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_nvcc_aon>;
+	};
+
+	/* Factory EEPROM */
+	eeprom@51 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+		vcc-supply = <&reg_nvcc_aon>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+
+	/* User EEPROM ID page */
+	eeprom@58 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+		vcc-supply = <&reg_nvcc_aon>;
+	};
+};
+
+&lpi2c2 { /* FPSC I2C1 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+};
+
+&lpi2c3 { /* FPSC I2C3 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+};
+
+&lpi2c4 { /* FPSC I2C4 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+};
+
+&lpi2c5 { /* FPSC I2C2 */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-names = "default";
+};
+
+&lpspi3 { /* FPSC SPI2 */
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	pinctrl-names = "default";
+};
+
+&lpspi4 { /* FPSC SPI3 */
+	pinctrl-0 = <&pinctrl_lpspi4>;
+	pinctrl-names = "default";
+};
+
+&lpspi7 { /* FPSC SPI1 */
+	pinctrl-0 = <&pinctrl_lpspi7>;
+	pinctrl-names = "default";
+};
+
+&lpuart5 { /* FPSC UART2 */
+	pinctrl-0 = <&pinctrl_lpuart5>;
+	pinctrl-names = "default";
+};
+
+&lpuart7 { /* FPSC UART3 */
+	pinctrl-0 = <&pinctrl_lpuart7>;
+	pinctrl-names = "default";
+};
+
+&lpuart8 { /* FPSC UART1 */
+	pinctrl-0 = <&pinctrl_lpuart8>;
+	pinctrl-names = "default";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio { /* FPSC RGMII2 */
+	pinctrl-0 = <&pinctrl_emdio>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethphy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		enet-phy-lane-no-swap;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&pcie0 { /* FPSC PCIE1 */
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+};
+
+&pcie1 { /* FPSC PCIE2 */
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+};
+
+&sai5 {	/* FPSC SAI1 */
+	pinctrl-0 = <&pinctrl_sai5>;
+	pintrc-names = "default";
+};
+
+&scmi_iomuxc {
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO	0x97e	/* RGMII2_MDIO */
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC	0x502	/* RGMII2_MDC */
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO16__GPIO2_IO_BIT16			0x31e	/* RGMII2_nINT */
+			IMX95_PAD_CCM_CLKO3__NETCMIX_TOP_NETC_TMR_1588_TRIG2	0x31e	/* RGMII2_EVENT_IN */
+			IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2	0x31e	/* RGMII2_EVENT_OUT */
+
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x57e	/* RGMII2_TX_3 */
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x57e	/* RGMII2_TX_2 */
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x57e	/* RGMII2_TX_1 */
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x57e	/* RGMII2_TX_0 */
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e	/* RGMII2_TX_CTL */
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e	/* RGMII2_TXC */
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e	/* RGMII2_RX_3 */
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e	/* RGMII2_RX_2 */
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e	/* RGMII2_RX_1 */
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e	/* RGMII2_RX_0 */
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e	/* RGMII2_RX_CTL */
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e	/* RGMII2_RXC */
+		>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0			0x31e
+			IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x57e
+			IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x57e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x57e
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x57e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x57e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x57e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x57e
+			IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x57e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX		0x51e	/* CAN1_TX */
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX	0x51e	/* CAN1_RX */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO25__CAN2_TX	0x51e	/* CAN2_TX */
+			IMX95_PAD_GPIO_IO27__CAN2_RX	0x51e	/* CAN2_RX */
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B		0x3fe	/* QSPI_CE */
+			IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK		0x3fe	/* QSPI_CLK */
+			IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0	0x3fe	/* QSPI_DATA_0 */
+			IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1	0x3fe	/* QSPI_DATA_1 */
+			IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2	0x3fe	/* QSPI_DATA_2 */
+			IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3	0x3fe	/* QSPI_DATA_3 */
+			IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS		0x3fe	/* QSPI_DQS */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_GPIO1_IO_BIT5	0x31e	/* GPIO1 */
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_GPIO1_IO_BIT4	0x31e	/* GPIO2 */
+			IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12	0x31e	/* GPIO3 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO17__GPIO2_IO_BIT17	0x31e	/* GPIO4 */
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL	0x40000b9e	/* I2C5_SCL */
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA	0x40000b9e	/* I2C5_SDA */
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA	0x40000b9e	/* I2C1_SDA_DNU */
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL	0x40000b9e	/* I2C1_SCL_DNU */
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e	/* I2C3_SDA */
+			IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e	/* I2C3_SCL */
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e	/* I2C4_SDA */
+			IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e	/* I2C4_SDL */
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO22__LPI2C5_SDA	0x40000b9e	/* I2C2_SDA */
+			IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e	/* I2C2_SCL */
+		>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO11__LPSPI3_SCK		0x51e	/* SPI2_SCLK */
+			IMX95_PAD_GPIO_IO10__LPSPI3_SOUT	0x51e	/* SPI2_MOSI */
+			IMX95_PAD_GPIO_IO09__LPSPI3_SIN		0x51e	/* SPI2_MISO */
+			IMX95_PAD_GPIO_IO08__LPSPI3_PCS0	0x51e	/* SPI2_CS */
+		>;
+	};
+
+	pinctrl_lpspi4: lpspi4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO21__LPSPI4_SCK		0x51e	/* SPI3_SCLK */
+			IMX95_PAD_GPIO_IO20__LPSPI4_SOUT	0x51e	/* SPI3_MOSI */
+			IMX95_PAD_GPIO_IO19__LPSPI4_SIN		0x51e	/* SPI3_MISO */
+			IMX95_PAD_GPIO_IO18__LPSPI4_PCS0	0x51e	/* SPI3_CS */
+		>;
+	};
+
+	pinctrl_lpspi7: lpspi7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO07__LPSPI7_SCK		0x51e	/* SPI1_SCLK */
+			IMX95_PAD_GPIO_IO06__LPSPI7_SOUT	0x51e	/* SPI1_MOSI */
+			IMX95_PAD_GPIO_IO05__LPSPI7_SIN		0x51e	/* SPI1_MISO */
+			IMX95_PAD_GPIO_IO04__LPSPI7_PCS0	0x51e	/* SPI1_CS */
+		>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO01__LPUART5_RX		0x51e	/* UART2_RXD */
+			IMX95_PAD_GPIO_IO00__LPUART5_TX		0x51e	/* UART2_TXD */
+			IMX95_PAD_GPIO_IO03__LPUART5_RTS_B	0x51e	/* UART2_RTS */
+			IMX95_PAD_GPIO_IO02__LPUART5_CTS_B	0x51e	/* UART2_CTS */
+		>;
+	};
+
+	pinctrl_lpuart7: lpuart7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO37__LPUART7_RX	0x31e	/* UART3_RXD */
+			IMX95_PAD_GPIO_IO36__LPUART7_TX	0x31e	/* UART3_TXD */
+		>;
+	};
+
+	pinctrl_lpuart8: lpuart8grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO13__LPUART8_RX		0x51e	/* UART1_RXD */
+			IMX95_PAD_GPIO_IO12__LPUART8_TX		0x51e	/* UART1_TXD */
+			IMX95_PAD_GPIO_IO15__LPUART8_RTS_B	0x51e	/* UART1_RTS */
+			IMX95_PAD_GPIO_IO14__LPUART8_CTS_B	0x51e	/* UART1_CTS */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x31e	/* PCIE1_nCLKREQ */
+			IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10	0x31e	/* PCIE1_nPERST */
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B	0x31e	/* PCIE2_nCLKREQ */
+			IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14	0x31e	/* PCIE2_nPERST */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7	0x31e
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC		0x51e	/* SAI1_RX_SYNC */
+			IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK		0x51e	/* SAI1_RX_BCLK */
+			IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0	0x51e	/* SAI1_RX_DATA */
+			IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC		0x51e	/* SAI1_TX_SYNC */
+			IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK		0x51e	/* SAI1_TX_BCLK */
+			IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0	0x51e	/* SAI1_TX_DATA */
+		>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+	      fsl,pins = <
+		      IMX95_PAD_GPIO_IO24__TPM3_CH3	0x51e	/* PWM1 */
+	      >;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+	      fsl,pins = <
+		      IMX95_PAD_GPIO_IO26__TPM5_CH3	0x51e	/* PWM2 */
+	      >;
+	};
+
+	pinctrl_usbc: usbcgrp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11	0x51e	/* USB1_PWR_EN */
+			IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13		0x51e	/* USB1_OC */
+		>;
+	};
+
+	pinctrl_usb2: usb2grp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13	0x51e	/* USB2_PWR_EN */
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14		0x51e	/* USB2_OC */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x13fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x13fe
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x15fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__USDHC2_CD_B		0x31e	/* CD */
+			IMX95_PAD_SD2_CLK__USDHC2_CLK		0x158e	/* CLK */
+			IMX95_PAD_SD2_CMD__USDHC2_CMD		0x138e	/* CMD */
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x138e	/* DATA0 */
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x138e	/* DATA1 */
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x138e	/* DATA2 */
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x138e	/* DATA3 */
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__USDHC2_CD_B		0x31e	/* CD */
+			IMX95_PAD_SD2_CLK__USDHC2_CLK		0x158e	/* CLK */
+			IMX95_PAD_SD2_CMD__USDHC2_CMD		0x138e	/* CMD */
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x138e	/* DATA0 */
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x138e	/* DATA1 */
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x138e	/* DATA2 */
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x138e	/* DATA3 */
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__USDHC2_CD_B		0x31e	/* CD */
+			IMX95_PAD_SD2_CLK__USDHC2_CLK		0x15fe	/* CLK */
+			IMX95_PAD_SD2_CMD__USDHC2_CMD		0x13fe	/* CMD */
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe	/* DATA0 */
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe	/* DATA1 */
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe	/* DATA2 */
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe	/* DATA3 */
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK		0x158e	/* SDIO_CLK */
+			IMX95_PAD_SD3_CMD__USDHC3_CMD		0x138e	/* SDIO_CMD */
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0	0x138e	/* SDIO_DATA0 */
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1	0x138e	/* SDIO_DATA1 */
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2	0x138e	/* SDIO_DATA2 */
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3	0x138e	/* SDIO_DATA3 */
+		>;
+	};
+};
+
+&tpm3 { /* FPSC PWM1 */
+	pinctrl-0 = <&pinctrl_tpm3>;
+	pinctrl-names = "default";
+};
+
+&tpm5 {	/* FPSC PWM2 */
+	pinctrl-0 = <&pinctrl_tpm5>;
+	pinctrl-names = "default";
+};
+
+&usb3 { /* FPSC USB1 */
+	pinctrl-0 = <&pinctrl_usbc>;
+	pinctrl-names = "default";
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	status = "okay";
+};
+
+&usdhc2 { /* FPSC SDCARD */
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	sd-uhs-sdr104;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+};
+
+&usdhc3 { /* FPSC SDIO */
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts
new file mode 100644
index 000000000000..5b05f256fd52
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
+ * https://www.toradex.com/products/carrier-board/smarc-development-board-kit
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx95-toradex-smarc.dtsi"
+
+/ {
+	model = "Toradex SMARC iMX95 on Toradex SMARC Development Board";
+	compatible = "toradex,smarc-imx95-dev",
+		     "toradex,smarc-imx95",
+		     "fsl,imx95";
+
+	reg_carrier_1p8v: regulator-carrier-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-carrier 1V8";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "tdx-smarc-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&scmi_clk IMX95_CLK_SAI3>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+	};
+};
+
+/* SMARC GBE0 */
+&enetc_port0 {
+	status = "okay";
+};
+
+/* SMARC GBE1 */
+&enetc_port1 {
+	status = "okay";
+};
+
+/* SMARC CAN0 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* SMARC CAN1 */
+&flexcan2 {
+	status = "okay";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio12>, <&pinctrl_gpio13>;
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio10>, <&pinctrl_gpio11>;
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>,
+		    <&pinctrl_gpio3>,
+		    <&pinctrl_gpio4>,
+		    <&pinctrl_gpio6>,
+		    <&pinctrl_gpio8>,
+		    <&pinctrl_gpio9>;
+};
+
+/* SMARC I2C_CAM0 */
+&i2c_cam0 {
+	status = "okay";
+};
+
+/* SMARC I2C_CAM1 */
+&i2c_cam1 {
+	status = "okay";
+};
+
+/* SMARC I2C_GP */
+&lpi2c2 {
+	status = "okay";
+
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai3>, <&pinctrl_sai3_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_carrier_1p8v>;
+		CPVDD-supply = <&reg_carrier_1p8v>;
+		DBVDD-supply = <&reg_carrier_1p8v>;
+		DCVDD-supply = <&reg_carrier_1p8v>;
+		MICVDD-supply = <&reg_carrier_1p8v>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+
+};
+
+/* SMARC I2C_PM */
+&lpi2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	fan_controller: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#pwm-cells = <2>;
+
+		fan {
+			cooling-levels = <255>;
+			pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+		};
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina226";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+};
+
+/* SMARC I2C_LCD */
+&lpi2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* I2C on DSI Connector Pins 4/6 */
+		i2c_dsi_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* I2C on DSI Connector Pins 52/54 */
+		i2c_dsi_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* SMARC SPI0 */
+&lpspi6 {
+	status = "okay";
+};
+
+/* SMARC SER1, used as the Linux Console */
+&lpuart1 {
+	status = "okay";
+};
+
+/* SMARC SER0, RS485 */
+&lpuart2 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* SMARC SER3, RS232 */
+&lpuart3 {
+	status = "okay";
+};
+
+/* SMARC MDIO, shared between all ethernet ports */
+&netc_emdio {
+	status = "okay";
+
+	ethphy3: ethernet-phy@4 {
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio7>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* SMARC PCIE_A / M2 Key B */
+&pcie0 {
+	status = "okay";
+};
+
+/* SMARC PCIE_B /  M2 Key E */
+&pcie1 {
+	status = "okay";
+};
+
+/* SMARC I2S0 */
+&sai3 {
+	status = "okay";
+};
+
+/* SMARC LCD0_BKLT_PWM */
+&tpm3 {
+	status = "okay";
+};
+
+/* SMARC LCD1_BKLT_PWM */
+&tpm4 {
+	status = "okay";
+};
+
+/* SMARC GPIO5 as PWM */
+&tpm5 {
+	status = "okay";
+};
+
+/* SMARC USB0 */
+&usb2 {
+	status = "okay";
+};
+
+/* SMARC USB1..4 */
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+/* SMARC SDIO */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi
new file mode 100644
index 000000000000..afbdadcb3686
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi
@@ -0,0 +1,1155 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx95.dtsi"
+
+/ {
+	aliases {
+		can0 = &flexcan1;
+		can1 = &flexcan2;
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		rtc0 = &rtc_i2c;
+		rtc1 = &scmi_bbm;
+		serial0 = &lpuart2;
+		serial1 = &lpuart1;
+		serial3 = &lpuart3;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	clk_dsi2dp_bridge: clock-dsi2dp-bridge {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	clk_serdes_eth_ref: clock-eth-ref {
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		/* CTRL_ETH_REF_CLK_STBY# */
+		enable-gpios = <&som_gpio_expander_1 13 GPIO_ACTIVE_HIGH>;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		/* SMARC P64 - USB0_OTG_ID */
+		id-gpios = <&som_gpio_expander_0 3 GPIO_ACTIVE_HIGH>;
+		label = "USB0";
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb0_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb0_otg_id>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		smarc_key_sleep: key-sleep {
+			gpios = <&som_ec_gpio_expander 4 GPIO_ACTIVE_LOW>;
+			label = "SMARC_SLEEP#";
+			wakeup-source;
+			linux,code = <KEY_SLEEP>;
+		};
+
+		smarc_switch_lid: switch-lid {
+			gpios = <&som_ec_gpio_expander 2 GPIO_ACTIVE_LOW>;
+			label = "SMARC_LID#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	reg_module_1p8v: regulator-module-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-module +V1.8";
+	};
+
+	/* Non PMIC On-module Supplies */
+	reg_module_dp_1p2v: regulator-module-dp-1p2v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1200000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-name = "On-module +V1.2_DP";
+		vin-supply = <&reg_module_1p8v>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		/* SMARC P62 - USB0_EN_OC# */
+		gpios = <&som_gpio_expander_0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "USB0_EN_OC#";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		/* CTRL_V_BUS_USB_HUB or SMARC P71 - USB2_EN_OC# */
+		gpios = <&som_gpio_expander_0 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "CTRL_V_BUS_USB_HUB";
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "SDIO_PWR_EN";
+		startup-delay-us = <20000>;
+	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_SD2_VSEL";
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		/* CTRL_EN_WIFI */
+		gpios = <&som_gpio_expander_1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "CTRL_EN_WIFI";
+		startup-delay-us = <2000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x3c000000>;
+			alloc-ranges = <0 0x80000000 0 0x7F000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+/* SMARC GBE0 */
+&enetc_port0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc0>, <&pinctrl_enetc0_1588_tmr>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+};
+
+/* SMARC GBE1 */
+&enetc_port1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc1>, <&pinctrl_enetc1_1588_tmr>;
+	phy-handle = <&ethphy2>;
+	phy-mode = "rgmii-id";
+};
+
+/* SMARC CAN0 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* SMARC CAN1 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	gpio-line-names = "", /* 0 */
+			  "",
+			  "SMARC_I2C_GP_CK",
+			  "SMARC_I2C_GP_DAT",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "CTRL_IO_EXP_INT_B";
+	status = "okay";
+};
+
+&gpio2 {
+	gpio-line-names = "SMARC_SPI0_CS0#", /* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_GPIO5",
+			  "",
+			  "I2C_CAM_DAT",
+			  "I2C_CAM_CK",
+			  "SMARC_GPIO12", /* 10 */
+			  "SMARC_GPIO13",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SPI1_CS0#",
+			  "",
+			  "", /* 20 */
+			  "",
+			  "SMARC_I2C_LCD_DAT",
+			  "SMARC_I2C_LCD_CK",
+			  "SMARC_SPI0_CS1#",
+			  "",
+			  "",
+			  "",
+			  "SMARC_I2C_PM_DAT",
+			  "SMARC_I2C_PM_CK",
+			  "I2C_SOM_DAT", /* 30 */
+			  "I2C_SOM_CK";
+	status = "okay";
+};
+
+&gpio3 {
+	gpio-line-names = "SMARC_SDIO_CD#", /* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SDIO_PWR_EN",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "PMIC_SD2_VSEL";
+	status = "okay";
+};
+
+&gpio4 {
+	gpio-line-names = "", /* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 10 */
+			  "",
+			  "",
+			  "",
+			  "SMARC_GPIO11",
+			  "SMARC_GPIO10",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "", /* 20 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_SMB_ALERT#";
+	status = "okay";
+};
+
+&gpio5 {
+	gpio-line-names = "SMARC_GPIO2", /* 0 */
+			  "SMARC_GPIO3",
+			  "SMARC_GPIO4",
+			  "SMARC_GPIO6",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SMARC_GPIO9",
+			  "SMARC_GPIO7",
+			  "SMARC_GPIO8", /* 10 */
+			  "SMARC_SPI1_CS1#",
+			  "",
+			  "SPI1_TPM_CS#";
+	status = "okay";
+};
+
+/* SMARC I2C_GP */
+&lpi2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2_gpio>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "st,24c32", "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+/* SMARC I2C_PM */
+&lpi2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3_gpio>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* I2C_SOM */
+&lpi2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c4>, <&pinctrl_ctrl_io_exp_int_b>;
+	pinctrl-1 = <&pinctrl_lpi2c4_gpio>, <&pinctrl_ctrl_io_exp_int_b>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio2 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	som_gpio_expander_0: gpio@20 {
+		compatible = "nxp,pcal6408";
+		reg = <0x20>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_PCIE_WAKE#", /* 0 */
+			"SMARC_PCIE_B_RST#",
+			"SMARC_PCIE_A_RST#",
+			"SMARC_USB0_OTG_ID",
+			"SMARC_USB0_EN", /* SMARC USB0_EN_OC# - Open Drain Output */
+			"SMARC_USB0_OC#", /* SMARC USB0_EN_OC# - Over-Current Sense Input */
+			"",
+			"SMARC_PCIE_C_RST#";
+	};
+
+	som_gpio_expander_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_GPIO0", /* 0 */
+			"SMARC_GPIO1",
+			"SMARC_LCD0_VDD_EN",
+			"SMARC_LCD0_BKLT_EN",
+			"SMARC_LCD1_VDD_EN",
+			"SMARC_LCD1_BKLT_EN",
+			"",
+			"",
+			"",
+			"",
+			"", /* 10 */
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"SMARC_SDIO_WP";
+	};
+
+	embedded-controller@28 {
+		compatible = "toradex,smarc-imx95-ec", "toradex,smarc-ec";
+		reg = <0x28>;
+	};
+
+	som_ec_gpio_expander: gpio@29 {
+		compatible = "toradex,ecgpiol16", "nxp,pcal6416";
+		reg = <0x29>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ec_int>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"SMARC_CHARGER_PRSNT#",
+			"SMARC_CHARGING#",
+			"SMARC_LID#",
+			"SMARC_BATLOW#",
+			"SMARC_SLEEP#";
+	};
+
+	/* SMARC DP0 */
+	som_dsi2dp_bridge: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		clocks = <&clk_dsi2dp_bridge>;
+		clock-names = "refclk";
+		vcc-supply = <&reg_module_dp_1p2v>;
+		vcca-supply = <&reg_module_dp_1p2v>;
+		vccio-supply = <&reg_module_1p8v>;
+		vpll-supply = <&reg_module_1p8v>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sn65dsi86_in: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sn65dsi86_out: endpoint {
+					data-lanes = <3 2 1 0>;
+				};
+			};
+		};
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* SMARC I2C_LCD */
+&lpi2c5 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5_gpio>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio2 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* I2C_CAM */
+&lpi2c7 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c7>;
+	pinctrl-1 = <&pinctrl_lpi2c7_gpio>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio2 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* SMARC I2C_CAM0 */
+		i2c_cam0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* SMARC I2C_CAM1 */
+		i2c_cam1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* SMARC SPI1 */
+&lpspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi4>;
+	cs-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>,
+		   <&gpio5 11 GPIO_ACTIVE_LOW>,
+		   <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	som_tpm: tpm@2 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0x2>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* SMARC SPI0 */
+&lpspi6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>,
+		   <&gpio2 24 GPIO_ACTIVE_LOW>;
+};
+
+/* SMARC SER1, used as the Linux Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+/* SMARC SER0 */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* SMARC SER3 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+/* SMARC MDIO, shared between all ethernet ports */
+&netc_emdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_emdio>;
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&som_gpio_expander_1>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+/* SMARC PCIE_A */
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	reset-gpios = <&som_gpio_expander_0 2 GPIO_ACTIVE_LOW>;
+};
+
+/* SMARC PCIE_B */
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	reset-gpios = <&som_gpio_expander_0 1 GPIO_ACTIVE_LOW>;
+};
+
+/* SMARC I2S0 */
+&sai3 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+};
+
+&thermal_zones {
+	/* PF09 Main PMIC */
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			trip0 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	/* PF53 VDD_ARM PMIC */
+	pf53-arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		trips {
+			trip0 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	/* PF53 VDD_SOC PMIC */
+	pf53-soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			trip0 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+/* SMARC LCD0_BKLT_PWM */
+&tpm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd0_bklt_pwm>;
+};
+
+/* SMARC LCD1_BKLT_PWM */
+&tpm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd1_bklt_pwm>;
+};
+
+/* SMARC GPIO5 as PWM */
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5_pwm>;
+};
+
+/* SMARC USB0 */
+&usb2 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	usb-role-switch;
+	vbus-supply = <&reg_usb0_vbus>;
+
+	port {
+		usb0_otg_id: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usb3 {
+	fsl,disable-port-power-control;
+};
+
+/* SMARC USB1..4  */
+&usb3_dwc3 {
+	dr_mode = "host";
+};
+
+&usb3_phy {
+	vbus-supply = <&reg_usb1_vbus>;
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+/* SMARC SDIO */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>,<&pinctrl_usdhc2_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+	wp-gpios = <&som_gpio_expander_1 15 GPIO_ACTIVE_HIGH>;
+};
+
+/* On-module Wi-Fi */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+};
+
+&scmi_bbm {
+	linux,code = <KEY_POWER>;
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	/* SMARC CAM_MCK */
+	pinctrl_cam_mck: cammckgrp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO1__CCMSRCGPCMIX_TOP_CLKO_1	0x51e>; /* SMARC S6 - CAM_MCK */
+	};
+
+	pinctrl_ec_int: ecintgrp {
+		fsl,pins = <IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11	0x31e>; /* SAI1_TXFS - EC_MCU_INT# */
+	};
+
+	/* SMARC MDIO, shared between all ethernet ports */
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x50e>, /* SMARC S45 - MDIO_CLK */
+			   <IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e>; /* SMARC S46 - MDIO_DAT */
+	};
+
+	/* SMARC GBE0 */
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e>, /* ENET1_TX_CTL */
+			   <IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK		0x58e>, /* ENET1_TXC    */
+			   <IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e>, /* ENET1_TDO    */
+			   <IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e>, /* ENET1_TD1    */
+			   <IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e>, /* ENET1_TD2    */
+			   <IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e>, /* ENET1_TD3    */
+			   <IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e>, /* ENET1_RX_CTL */
+			   <IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK		0x58e>, /* ENET1_RXC    */
+			   <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e>, /* ENET1_RD0    */
+			   <IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e>, /* ENET1_RD1    */
+			   <IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e>, /* ENET1_RD2    */
+			   <IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e>; /* ENET1_RD3    */
+	};
+
+	/* SMARC GBE0_SDP */
+	pinctrl_enetc0_1588_tmr: enetc01588tmrgrp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO2__NETCMIX_TOP_NETC_TMR_1588_PP1	0x51e>; /* SMARC P6 - GBE0_SDP */
+	};
+
+	/* SMARC GBE1 */
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e>, /* ENET2_TX_CTL */
+			   <IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK		0x58e>, /* ENET2_TXC    */
+			   <IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x50e>, /* ENET2_TD0    */
+			   <IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x50e>, /* ENET2_TD1    */
+			   <IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x50e>, /* ENET2_TD2    */
+			   <IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x50e>, /* ENET2_TD3    */
+			   <IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e>, /* ENET2_RX_CTL */
+			   <IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK		0x58e>, /* ENET2_RXC    */
+			   <IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x57e>, /* ENET2_RD0    */
+			   <IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x57e>, /* ENET2_RD1    */
+			   <IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x57e>, /* ENET2_RD2    */
+			   <IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x57e>; /* ENET2_RD3    */
+	};
+
+	/* SMARC GBE1_SDP */
+	pinctrl_enetc1_1588_tmr: enetc11588tmrgrp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2	0x51e>; /* SMARC P5 - GBE1_SDP */
+	};
+
+	/* SMARC CAN0 */
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX		0x39e>, /* SMARC P143 - CAN0_TX */
+			   <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX	0x39e>; /* SMARC P144 - CAN0_RX */
+	};
+
+	/* SMARC CAN1 */
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO25__CAN2_TX	0x39e>, /* SMARC P145 - CAN1_TX */
+			   <IMX95_PAD_GPIO_IO27__CAN2_RX	0x39e>; /* SMARC P146 - CAN1_RX */
+	};
+
+	/* SMARC GPIO2 */
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <IMX95_PAD_XSPI1_DATA0__GPIO5_IO_BIT0	0x31e>; /* SMARC P110 - GPIO2 */
+	};
+
+	/* SMARC GPIO3 */
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <IMX95_PAD_XSPI1_DATA1__GPIO5_IO_BIT1	0x31e>; /* SMARC P111 - GPIO3 */
+	};
+
+	/* SMARC GPIO4 */
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <IMX95_PAD_XSPI1_DATA2__GPIO5_IO_BIT2	0x31e>; /* SMARC P112 - GPIO4 */
+	};
+
+	/* SMARC GPIO5 */
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO06__GPIO2_IO_BIT6	0x31e>; /* SMARC P113 - GPIO5 */
+	};
+
+	/* SMARC GPIO5 as PWM */
+	pinctrl_gpio5_pwm: gpio5pwmgrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO06__TPM5_CH0	0x11e>; /* SMARC P113 - PWM_OUT */
+	};
+
+	/* SMARC GPIO6 */
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins = <IMX95_PAD_XSPI1_DATA3__GPIO5_IO_BIT3	0x31e>; /* SMARC P114 - GPIO6 */
+	};
+
+	/* SMARC GPIO7 */
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins = <IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9 0x31e>; /* SMARC P115 - GPIO7 */
+	};
+
+	/* SMARC GPIO8 */
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins = <IMX95_PAD_XSPI1_SS0_B__GPIO5_IO_BIT10	0x31e>; /* SMARC P116 - GPIO8 */
+	};
+
+	/* SMARC GPIO9 */
+	pinctrl_gpio9: gpio9grp {
+		fsl,pins = <IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8	0x31e>; /* SMARC P117 - GPIO9 */
+	};
+
+	/* SMARC GPIO10 */
+	pinctrl_gpio10: gpio10grp {
+		fsl,pins = <IMX95_PAD_ENET2_MDIO__GPIO4_IO_BIT15	0x31e>; /* SMARC P118 - GPIO10 */
+	};
+
+	/* SMARC GPIO11 */
+	pinctrl_gpio11: gpio11grp {
+		fsl,pins = <IMX95_PAD_ENET2_MDC__GPIO4_IO_BIT14	0x31e>; /* SMARC P119 - GPIO11 */
+	};
+
+	/* SMARC GPIO12 */
+	pinctrl_gpio12: gpio12grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO10__GPIO2_IO_BIT10	0x31e>; /* SMARC S142 - GPIO12 */
+	};
+
+	/* SMARC GPIO13 */
+	pinctrl_gpio13: gpio13grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11	0x31e>; /* SMARC S123 - GPIO13 */
+	};
+
+	pinctrl_ctrl_io_exp_int_b: ioexpintgrp {
+		fsl,pins = <IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14 0x31e>; /* CTRL_IO_EXP_INT_B */
+	};
+
+	/* SMARC LCD0_BKLT_PWM */
+	pinctrl_lcd0_bklt_pwm: lcd0bkltpwmgrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO12__TPM3_CH2	0x51e>; /* SMARC S141 - LCD0_BKLT_PWM */
+	};
+
+	/* SMARC LCD1_BKLT_PWM */
+	pinctrl_lcd1_bklt_pwm: lcd1bkltpwmgrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO13__TPM4_CH2	0x51e>; /* SMARC S122 - LCD1_BKLT_PWM */
+	};
+
+	/* SMARC I2C_GP */
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL	0x40001b9e>, /* SMARC S48 - I2C_GP_CK  */
+			   <IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA	0x40001b9e>; /* SMARC S49 - I2C_GP_DAT */
+	};
+
+	/* SMARC I2C_GP as GPIOs */
+	pinctrl_lpi2c2_gpio: lpi2c2gpiogrp {
+		fsl,pins = <IMX95_PAD_I2C2_SCL__AONMIX_TOP_GPIO1_IO_BIT2	0x40001b9e>, /* SMARC S48 - I2C_GP_CK  */
+			   <IMX95_PAD_I2C2_SDA__AONMIX_TOP_GPIO1_IO_BIT3	0x40001b9e>; /* SMARC S49 - I2C_GP_DAT */
+	};
+
+	/* SMARC I2C_PM */
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO28__LPI2C3_SDA	0x40001b9e>, /* SMARC P122 - I2C_PM_DAT */
+			   <IMX95_PAD_GPIO_IO29__LPI2C3_SCL	0x40001b9e>; /* SMARC P121 - I2C_PM_CK  */
+	};
+
+	/* SMARC I2C_PM as GPIOs */
+	pinctrl_lpi2c3_gpio: lpi2c3gpiogrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28	0x40001b9e>, /* SMARC P122 - I2C_PM_DAT */
+			   <IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29	0x40001b9e>; /* SMARC P121 - I2C_PM_CK  */
+	};
+
+	/* I2C_SOM */
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO31__LPI2C4_SCL	0x40001b9e>, /* I2C_SOM_CK  */
+			   <IMX95_PAD_GPIO_IO30__LPI2C4_SDA	0x40001b9e>; /* I2C_SOM_DAT */
+	};
+
+	/* I2C_SOM as GPIOs */
+	pinctrl_lpi2c4_gpio: lpi2c4gpiogrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31	0x40001b9e>, /* I2C_SOM_CK  */
+			   <IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30	0x40001b9e>; /* I2C_SOM_DAT */
+	};
+
+	/* SMARC I2C_LCD */
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO22__LPI2C5_SDA	0x40001b9e>, /* SMARC S140 - I2C_LCD_DAT */
+			   <IMX95_PAD_GPIO_IO23__LPI2C5_SCL	0x40001b9e>; /* SMARC S139 - I2C_LCD_CK  */
+	};
+
+	/* SMARC I2C_LCD as GPIOs */
+	pinctrl_lpi2c5_gpio: lpi2c5gpiogrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22	0x40001b9e>, /* SMARC S140 - I2C_LCD_DAT */
+			   <IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23	0x40001b9e>; /* SMARC S139 - I2C_LCD_CK  */
+	};
+
+	/* I2C_CAM */
+	pinctrl_lpi2c7: lpi2c7grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO08__LPI2C7_SDA	0x40001b9e>, /* I2C_CAM_DAT */
+			   <IMX95_PAD_GPIO_IO09__LPI2C7_SCL	0x40001b9e>; /* I2C_CAM_CK  */
+	};
+
+	/* I2C_CAM as GPIOs */
+	pinctrl_lpi2c7_gpio: lpi2c7gpiogrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO08__GPIO2_IO_BIT8	0x40001b9e>, /* I2C_CAM_DAT */
+			   <IMX95_PAD_GPIO_IO09__GPIO2_IO_BIT9	0x40001b9e>; /* I2C_CAM_CK  */
+	};
+
+	/* SMARC SPI1 */
+	pinctrl_lpspi4: lpspi4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO37__LPSPI4_SCK		0x3fe>, /* SMARC P56 - SPI1_CK   */
+			   <IMX95_PAD_GPIO_IO36__LPSPI4_SOUT		0x3fe>, /* SMARC P58 - SPI1_DO   */
+			   <IMX95_PAD_GPIO_IO19__LPSPI4_SIN		0x3fe>, /* SMARC P57 - SPI1_DIN  */
+			   <IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13		0x3fe>, /* SPI1_TPM_CS#          */
+			   <IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18		0x3fe>, /* SMARC P54 - SPI1_CS0# */
+			   <IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11	0x3fe>; /* SMARC P55 - SPI1_CS1# */
+	};
+
+	/* SMARC SPI0 */
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO00__GPIO2_IO_BIT0		0x3fe>, /* SMARC P43 - SPI0_CS0# */
+			   <IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24		0x3fe>, /* SMARC P31 - SPI0_CS1# */
+			   <IMX95_PAD_GPIO_IO01__LPSPI6_SIN		0x3fe>, /* SMARC P45 - SPI0_DIN  */
+			   <IMX95_PAD_GPIO_IO02__LPSPI6_SOUT		0x3fe>, /* SMARC P46 - SPI0_DO   */
+			   <IMX95_PAD_GPIO_IO03__LPSPI6_SCK		0x3fe>; /* SMARC P44 - SPI0_CK   */
+	};
+
+	/* SMARC PCIE_A */
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B	0x40001b1e>; /* SMARC P78 - PCIE_A_CKREQ# */
+	};
+
+	/* SMARC PCIE_B */
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B	0x40001b1e>; /* SMARC P77 - PCIE_B_CKREQ# */
+	};
+
+	/* SMARC I2S0 */
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK		0x11e>, /* SMARC S38 - I2S0_CK */
+			   <IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0	0x11e>, /* SMARC S41 - I2S0_SDIN */
+			   <IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0	0x11e>, /* SMARC S40 - I2S0_SDOUT */
+			   <IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC		0x11e>; /* SMARC S39 - I2S0_LRCK */
+	};
+
+	/* SMARC AUDIO_MCK */
+	pinctrl_sai3_mclk: sai3mclkgrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO17__SAI3_MCLK	0x31e>; /* SMARC S42 - AUDIO_MCK */
+	};
+
+	/* SMARC I2S2 */
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK		0x11e>, /* SMARC S53 - I2S2_CK */
+			   <IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0	0x11e>, /* SMARC S51 - I2S2_SDOUT */
+			   <IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0	0x11e>, /* SMARC S52 - I2S2_SDIN */
+			   <IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC		0x11e>; /* SMARC S50 - I2S2_LRCK */
+	};
+
+	/* SMARC SMB_ALERT# */
+	pinctrl_smb_alert_gpio: smbalertgrp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28	0x31e>; /* SMARC P1 - SMB_ALERT# */
+	};
+
+	/* SMARC SER1, used as the Linux Console */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX	0x31e>, /* SMARC P134 - SER1_TX */
+			   <IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX	0x31e>; /* SMARC P135 - SER1_RX */
+	};
+
+	/* SMARC SER0 */
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPUART2_CTS_B	0x31e>, /* SMARC P132 - SER0_CTS# */
+			   <IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPUART2_RTS_B	0x31e>, /* SMARC P131 - SER0_RTS# */
+			   <IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX		0x31e>, /* SMARC P130 - SER0_RX   */
+			   <IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX		0x31e>; /* SMARC P129 - SER0_TX   */
+	};
+
+	/* SMARC SER3 */
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO14__LPUART3_TX	0x31e>, /* SMARC P140 - SER3_TX */
+			   <IMX95_PAD_GPIO_IO15__LPUART3_RX	0x31e>; /* SMARC P141 - SER3_RX */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x158e>, /* SD1_CLK    */
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x138e>, /* SD1_CMD    */
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x138e>, /* SD1_DATA0  */
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x138e>, /* SD1_DATA1  */
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x138e>, /* SD1_DATA2  */
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x138e>, /* SD1_DATA3  */
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x138e>, /* SD1_DATA4  */
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x138e>, /* SD1_DATA5  */
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x138e>, /* SD1_DATA6  */
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x138e>, /* SD1_DATA7  */
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x158e>; /* SD1_STROBE */
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x15fe>, /* SD1_CLK    */
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x13fe>, /* SD1_CMD    */
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe>, /* SD1_DATA0  */
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe>, /* SD1_DATA1  */
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe>, /* SD1_DATA2  */
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe>, /* SD1_DATA3  */
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe>, /* SD1_DATA4  */
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe>, /* SD1_DATA5  */
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe>, /* SD1_DATA6  */
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe>, /* SD1_DATA7  */
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe>; /* SD1_STROBE */
+	};
+
+	/* SMARC SDIO */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK		0x158e>, /* SMARC P36 - SDIO_CK  */
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD		0x138e>, /* SMARC P34 - SDIO_CMD */
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e>, /* SMARC P39 - SDIO_D0  */
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e>, /* SMARC P40 - SDIO_D1  */
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e>, /* SMARC P41 - SDIO_D2  */
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e>; /* SMARC P42 - SDIO_D3  */
+	};
+
+	/* SMARC SDIO */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK		0x15fe>, /* SMARC P36 - SDIO_CK  */
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD		0x13fe>, /* SMARC P34 - SDIO_CMD */
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x13fe>, /* SMARC P39 - SDIO_D0  */
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x13fe>, /* SMARC P40 - SDIO_D1  */
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x13fe>, /* SMARC P41 - SDIO_D2  */
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x13fe>; /* SMARC P42 - SDIO_D3  */
+	};
+
+	/* SMARC SDIO */
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK		0x400>, /* SMARC P36 - SDIO_CK  */
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD		0x400>, /* SMARC P34 - SDIO_CMD */
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x400>, /* SMARC P39 - SDIO_D0  */
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x400>, /* SMARC P40 - SDIO_D1  */
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x400>, /* SMARC P41 - SDIO_D2  */
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x400>; /* SMARC P42 - SDIO_D3  */
+	};
+
+	/* SMARC SDIO_CD# */
+	pinctrl_usdhc2_cd: usdhc2-cdgrp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0	0x1100>; /* SMARC P35 - SDIO_CD# */
+	};
+
+	/* SMARC SDIO_PWR_EN */
+	pinctrl_usdhc2_pwr_en: usdhc2-pwrengrp {
+		fsl,pins = <IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7	0x11e>; /* SMARC P37 - SDIO_PWR_EN */
+	};
+
+	pinctrl_usdhc2_vsel: usdhc2-vselgrp {
+		fsl,pins = <IMX95_PAD_SD2_VSELECT__GPIO3_IO_BIT19	0x4>; /* PMIC_SD2_VSEL */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <IMX95_PAD_SD3_CLK__USDHC3_CLK	0x158e>, /* SD3_CLK   */
+			   <IMX95_PAD_SD3_CMD__USDHC3_CMD	0x138e>, /* SD3_CMD   */
+			   <IMX95_PAD_SD3_DATA0__USDHC3_DATA0	0x138e>, /* SD3_DATA0 */
+			   <IMX95_PAD_SD3_DATA1__USDHC3_DATA1	0x138e>, /* SD3_DATA1 */
+			   <IMX95_PAD_SD3_DATA2__USDHC3_DATA2	0x138e>, /* SD3_DATA2 */
+			   <IMX95_PAD_SD3_DATA3__USDHC3_DATA3	0x138e>; /* SD3_DATA3 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD3_CLK__USDHC3_CLK	0x15fe>, /* SD3_CLK   */
+			   <IMX95_PAD_SD3_CMD__USDHC3_CMD	0x13fe>, /* SD3_CMD   */
+			   <IMX95_PAD_SD3_DATA0__USDHC3_DATA0	0x13fe>, /* SD3_DATA1 */
+			   <IMX95_PAD_SD3_DATA1__USDHC3_DATA1	0x13fe>, /* SD3_DATA2 */
+			   <IMX95_PAD_SD3_DATA2__USDHC3_DATA2	0x13fe>, /* SD3_DATA3 */
+			   <IMX95_PAD_SD3_DATA3__USDHC3_DATA3	0x13fe>; /* SD3_DATA4 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
new file mode 100644
index 000000000000..97726eded0f8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx95-tqma9596sa.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX95 TQMa95xxSA on MB-SMARC-2";
+	compatible = "tq,imx95-tqma9596sa-mb-smarc-2", "tq,imx95-tqma9596sa", "fsl,imx95";
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &scmi_bbm;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+		spi0 = &flexspi1;
+		spi1 = &lpspi3;
+	};
+
+	chosen {
+		stdout-path = &lpuart7;
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&tpm3 0 100000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_12v0>;
+		status = "disabled";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&tpm4 0 100000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_12v0>;
+		status = "disabled";
+	};
+
+	panel_lvds0: panel-lvds0 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_lvds0>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+				/* TODO: LVDS0 out */
+			};
+		};
+	};
+
+	panel_lvds1: panel-lvds1 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_lvds1>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds1: endpoint {
+				/* TODO: LVDS1 out */
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_lvds0: regulator-lvds0 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds1: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD1_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		audio-codec = <&tlv320aic3x04>;
+		audio-cpu = <&sai3>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+	};
+};
+
+&enetc_port0 {
+	status = "okay";
+};
+
+&enetc_port1 {
+	status = "okay";
+};
+
+&expander2 {
+	pcie1-clk-en-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE1_CLK_EN";
+	};
+
+	pcie2-clk-en-hog {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE2_CLK_EN";
+	};
+};
+
+&flexcan1 {
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan3 {
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&scmi_clk IMX95_CLK_SAI3>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	eeprom2: eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&lpspi3 {
+	status = "okay";
+};
+
+/* SER0 */
+&lpuart1 {
+	status = "reserved";
+};
+
+/* SER3 */
+&lpuart5 {
+	status = "okay";
+};
+
+/* SER1 */
+&lpuart7 {
+	status = "okay";
+};
+
+/* SER2 */
+&lpuart8 {
+	status = "okay";
+};
+
+/* X44 mPCIe */
+&pcie0 {
+	status = "okay";
+};
+
+/* X22 PCIe x1 socket */
+&pcie1 {
+	status = "okay";
+};
+
+&reg_sdvmmc {
+	status = "okay";
+};
+
+&sai3 {
+	status = "okay";
+};
+
+/* X4 */
+&usb2 {
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	/* DR not yet supported */
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+/* X16 */
+&usdhc2 {
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
new file mode 100644
index 000000000000..43418844701b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi
@@ -0,0 +1,803 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/*
+		 * DRAM base addr, size : 2048 MiB DRAM
+		 * should be corrected by bootloader
+		 */
+		reg = <0 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x28000000>;
+			alloc-ranges = <0 0x80000000 0 0x80000000>;
+			linux,cma-default;
+		};
+
+		vpu_boot: vpu_boot@a0000000 {
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	clk_dp: clk-dp {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Controlled by system manager */
+	reg_sdvmmc: regulator-sdvmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sdvmmc>;
+		regulator-name = "SDIO_PWR_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+};
+
+&enetc_port0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&enetc_port1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	phy-handle = <&ethphy3>;
+	phy-mode = "rgmii-id";
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <66000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		vcc-supply = <&reg_1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "GPIO7", "GPIO8",
+			  "", "GPIO9", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "SLEEP", "GPIO5",
+			  "", "", "GPIO6", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	tmp1075: temperature-sensor@4a {
+		compatible = "ti,tmp1075";
+		reg = <0x4a>;
+		vs-supply = <&reg_1v8>;
+	};
+
+	eeprom_smarc: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcf85063>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	m24c64: eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @50) */
+	eeprom@58 {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x58>;
+		pagesize = <32>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @54) */
+	eeprom@5c {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x5c>;
+		pagesize = <32>;
+		vcc-supply = <&reg_1v8>;
+	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0441";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+
+	imu@6b {
+		compatible = "st,ism330dhcx";
+		reg = <0x6b>;
+		vdd-supply = <&reg_3v3>;
+		vddio-supply = <&reg_3v3>;
+	};
+
+	/* D23 */
+	expander2: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		vcc-supply = <&reg_1v8>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO4", "LCD0_BLKT_EN", "LCD0_VDD_EN", "LCD1_BLKT_EN",
+				  "LCD1_VDD_EN", "ENET1_RESET#", "ENET2_RESET#", "GBE0_SDP_DIR",
+				  "GBE1_SDP_DIR", "PCIE1_RST#", "PCIE2_RST#", "DP_BRIDGE_EN",
+				  "HUB_RST#", "QSPI_RESET#", "PCIE1_CLK_EN", "PCIE2_CLK_EN";
+	};
+
+	/* D21 */
+	expander1: gpio@75 {
+		compatible = "ti,tca9539";
+		reg = <0x75>;
+		vcc-supply = <&reg_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander1>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		gpio-line-names = "GPIO10", "GPIO11", "GPIO12", "GPIO13",
+				  "CHG_PRSNT#", "CHARGING", "LID", "BATLOW#",
+				  "TEMP_EVENT#", "PGOOD_ARM", "PGOOD_SOC", "PCIE_WAKE#_1V8",
+				  "GPIO0", "GPIO1", "GPIO2", "GPIO3";
+	};
+};
+
+/* I2C_CAM0 */
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3_gpio>;
+	sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	dp_bridge: dp-bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		clock-names = "ref";
+		clocks = <&clk_dp>;
+		reset-gpios = <&expander2 11 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+		toshiba,hpd-pin = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp_dsi_in: endpoint {
+					/* TODO: DSI out */
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+};
+
+/* I2C_CAM1 */
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-1 = <&pinctrl_lpi2c4_gpio>;
+	sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio2 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* I2C_LCD */
+&lpi2c6 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c6>;
+	pinctrl-1 = <&pinctrl_lpi2c6_gpio>;
+	sda-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&lpspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	cs-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>, <&gpio2 7 GPIO_ACTIVE_LOW>;
+};
+
+/* SER0 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+/* SER3 */
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart5>;
+};
+
+/* SER1 */
+&lpuart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart7>;
+};
+
+/* SER2 */
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart8>;
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ethphy0>;
+		reset-gpios = <&expander2 5 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <500000>;
+		reset-deassert-us = <50000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,dp83867-rxctrl-strap-quirk;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	ethphy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ethphy3>;
+		reset-gpios = <&expander2 6 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <500000>;
+		reset-deassert-us = <50000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,dp83867-rxctrl-strap-quirk;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX95_CLK_HSIO>,
+		 <&scmi_clk IMX95_CLK_HSIOPLL>,
+		 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
+		 <&pcieclk 1>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+	reset-gpios = <&expander2 9 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX95_CLK_HSIO>,
+		 <&scmi_clk IMX95_CLK_HSIOPLL>,
+		 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
+		 <&pcieclk 0>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+	reset-gpios = <&expander2 10 GPIO_ACTIVE_LOW>;
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	fsl,sai-mclk-direction-output;
+};
+
+&sai5 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI5>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+};
+
+&scmi_bbm {
+	linux,code = <KEY_POWER>;
+};
+
+&tpm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm3>;
+};
+
+&tpm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm4>;
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&expander2 12 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&expander2 12 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_sdvmmc>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	bus-width = <4>;
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13				0x1100>;
+	};
+
+	pinctrl_ethphy3: ethphy3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14				0x1100>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x1100>,
+			   <IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x1100>,
+			   <IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x1100>,
+			   <IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x1100>,
+			   <IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK		0x1100>,
+			   <IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x1100>,
+			   <IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x11e>,
+			   <IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x11e>,
+			   <IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x11e>,
+			   <IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x11e>,
+			   <IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK		0x11e>,
+			   <IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x11e>,
+			   <IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23				0x51e>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x1100>,
+			   <IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x1100>,
+			   <IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x1100>,
+			   <IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x1100>,
+			   <IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK		0x1100>,
+			   <IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x1100>,
+			   <IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x11e>,
+			   <IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x11e>,
+			   <IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x11e>,
+			   <IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x11e>,
+			   <IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK		0x11e>,
+			   <IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x11e>,
+			   <IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24				0x51e>;
+	};
+
+	pinctrl_expander1: expander1grp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27				0x1100>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX	0x1300>,
+			   <IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX		0x31e>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <IMX95_PAD_CCM_CLKO3__CAN3_TX		0x31e>,
+			   <IMX95_PAD_CCM_CLKO4__CAN3_RX		0x1300>;
+	};
+
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = <IMX95_PAD_SD3_CLK__FLEXSPI1_A_SCLK		0x19e>,
+			   <IMX95_PAD_SD3_CMD__FLEXSPI1_A_SS0_B		0x19e>,
+			   <IMX95_PAD_SD3_DATA0__FLEXSPI1_A_DATA_BIT0	0x19e>,
+			   <IMX95_PAD_SD3_DATA1__FLEXSPI1_A_DATA_BIT1	0x19e>,
+			   <IMX95_PAD_SD3_DATA2__FLEXSPI1_A_DATA_BIT2	0x19e>,
+			   <IMX95_PAD_SD3_DATA3__FLEXSPI1_A_DATA_BIT3	0x19e>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10	0x111e>,
+			   <IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13		0x111e>,
+			   <IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11		0x111e>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18		0x1100>,
+			   <IMX95_PAD_GPIO_IO19__GPIO2_IO_BIT19		0x111e>,
+			   <IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22		0x111e>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x4000191e>,
+			   <IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x4000191e>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO28__LPI2C3_SDA			0x4000191e>,
+			   <IMX95_PAD_GPIO_IO29__LPI2C3_SCL			0x4000191e>;
+	};
+
+	pinctrl_lpi2c3_gpio: lpi2c3-gpiogrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28		0x4000191e>,
+			   <IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29		0x4000191e>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO30__LPI2C4_SDA		0x4000191e>,
+			   <IMX95_PAD_GPIO_IO31__LPI2C4_SCL		0x4000191e>;
+	};
+
+	pinctrl_lpi2c4_gpio: lpi2c4-gpiogrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30		0x4000191e>,
+			   <IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31		0x4000191e>;
+	};
+
+	pinctrl_lpi2c6: lpi2c6grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO02__LPI2C6_SDA		0x4000191e>,
+			   <IMX95_PAD_GPIO_IO03__LPI2C6_SCL		0x4000191e>;
+	};
+
+	pinctrl_lpi2c6_gpio: lpi2c6-gpiogrp {
+		fsl,pins = <IMX95_PAD_GPIO_IO02__GPIO2_IO_BIT2		0x4000191e>,
+			   <IMX95_PAD_GPIO_IO03__GPIO2_IO_BIT3		0x4000191e>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO07__GPIO2_IO_BIT7		0x51e>,
+			   <IMX95_PAD_GPIO_IO08__GPIO2_IO_BIT8		0x51e>,
+			   <IMX95_PAD_GPIO_IO09__LPSPI3_SIN		0x51e>,
+			   <IMX95_PAD_GPIO_IO10__LPSPI3_SOUT		0x51e>,
+			   <IMX95_PAD_GPIO_IO11__LPSPI3_SCK		0x51e>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX		0x1300>,
+			   <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX		0x31e>,
+			   <IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART1_RTS_B	0x1300>,
+			   <IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART1_CTS_B	0x31e>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO00__LPUART5_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO01__LPUART5_RX			0x1300>;
+	};
+
+	pinctrl_lpuart7: lpuart7grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO36__LPUART7_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO37__LPUART7_RX			0x1300>;
+	};
+
+	pinctrl_lpuart8: lpuart8grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO12__LPUART8_TX			0x31e>,
+			   <IMX95_PAD_GPIO_IO13__LPUART8_RX			0x1300>,
+			   <IMX95_PAD_GPIO_IO14__LPUART8_CTS_B			0x31e>,
+			   <IMX95_PAD_GPIO_IO15__LPUART8_RTS_B			0x1300>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x51e>,
+			   <IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x51e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO27__GPIO2_IO_BIT27			0x1100>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B	0x111e>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B	0x111e>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK			0x51e>,
+			   <IMX95_PAD_GPIO_IO17__SAI3_MCLK			0x51e>,
+			   <IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0		0x1300>,
+			   <IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0		0x51e>,
+			   <IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC			0x51e>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0		0x51e>,
+			   <IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC			0x51e>,
+			   <IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK			0x51e>,
+			   <IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0		0x1300>;
+	};
+
+	pinctrl_sdvmmc: sdvmmcgrp {
+		fsl,pins = <IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x11e>;
+	};
+
+	pinctrl_tc9595: tc9595grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO25__GPIO2_IO_BIT25			0x1500>;
+	};
+
+	pinctrl_tpm3: tpm3grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO04__TPM3_CH0			0x51e>;
+	};
+
+	pinctrl_tpm4: tpm4grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO05__TPM4_CH0			0x51e>;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+		fsl,pins = <IMX95_PAD_GPIO_IO06__TPM5_CH0			0x51e>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x158e>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x138e>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x138e>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x138e>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x138e>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x138e>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x138e>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x138e>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x138e>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x138e>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x158e>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x158e>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x138e>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x138e>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x138e>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x138e>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x138e>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x138e>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x138e>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x138e>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x138e>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x158e>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x15fe>,
+			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x13fe>,
+			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe>,
+			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe>,
+			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe>,
+			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe>,
+			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe>,
+			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe>,
+			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe>,
+			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe>,
+			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x51e>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x31e>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x131e>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x131e>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x131e>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x131e>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x1100>,
+			   <IMX95_PAD_SD2_CLK__USDHC2_CLK			0x15fe>,
+			   <IMX95_PAD_SD2_CMD__USDHC2_CMD			0x13fe>,
+			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x13fe>,
+			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x13fe>,
+			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x13fe>,
+			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x13fe>,
+			   <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index d10f62eacfe0..e45014d50abe 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -3,6 +3,7 @@
  * Copyright 2024 NXP
  */
 
+#include <dt-bindings/clock/nxp,imx95-clock.h>
 #include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -249,6 +250,28 @@
 		clock-output-names = "dummy";
 	};
 
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-hz-real = /bits/ 64 <500000000>;
+			opp-microvolt = <920000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-hz-real = /bits/ 64 <800000000>;
+			opp-microvolt = <920000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-hz-real = /bits/ 64 <1000000000>;
+			opp-microvolt = <920000>;
+		};
+	};
+
 	clk_ext1: clock-ext1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -259,38 +282,45 @@
 	sai1_mclk: clock-sai-mclk1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <0>;
+		clock-frequency = <0>;
 		clock-output-names = "sai1_mclk";
 	};
 
 	sai2_mclk: clock-sai-mclk2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <0>;
+		clock-frequency = <0>;
 		clock-output-names = "sai2_mclk";
 	};
 
 	sai3_mclk: clock-sai-mclk3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <0>;
+		clock-frequency = <0>;
 		clock-output-names = "sai3_mclk";
 	};
 
 	sai4_mclk: clock-sai-mclk4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <0>;
+		clock-frequency = <0>;
 		clock-output-names = "sai4_mclk";
 	};
 
 	sai5_mclk: clock-sai-mclk5 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <0>;
+		clock-frequency = <0>;
 		clock-output-names = "sai5_mclk";
 	};
 
+	clk_sys100m: clock-sys100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "clk_sys100m";
+	};
+
 	osc_24m: clock-24m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -343,10 +373,18 @@
 				reg = <0x19>;
 			};
 
+			scmi_lmm: protocol@80 {
+				reg = <0x80>;
+			};
+
 			scmi_bbm: protocol@81 {
 				reg = <0x81>;
 			};
 
+			scmi_cpu: protocol@82 {
+				reg = <0x82>;
+			};
+
 			scmi_misc: protocol@84 {
 				reg = <0x84>;
 			};
@@ -463,12 +501,123 @@
 		};
 	};
 
+	usbphynop: usbphynop {
+		compatible = "usb-nop-xceiv";
+		clocks = <&scmi_clk IMX95_CLK_HSIO>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
+		etm0: etm@40840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x40840000 0x0 0x10000>;
+			arm,primecell-periphid = <0xbb95d>;
+			cpu = <&A55_0>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel0: funnel {
+			/*
+			 * non-configurable funnel don't show up on the AMBA
+			 * bus.  As such no need to add "arm,primecell".
+			 */
+			compatible = "arm,coresight-static-funnel";
+			status = "disabled";
+
+			in-ports {
+				port {
+					ca_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel1: funnel-sys {
+			compatible = "arm,coresight-static-funnel";
+			status = "disabled";
+
+			in-ports {
+				port {
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf: etf@41030000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x41030000 0x0 0x1000>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+			};
+		};
+
+		etr: etr@41040000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x41040000 0x0 0x1000>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
 		aips2: bus@42000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x0 0x42000000 0x0 0x800000>;
@@ -673,6 +822,18 @@
 				status = "disabled";
 			};
 
+			i3c2: i3c@42520000 {
+				compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_I3C2SLOW>;
+				clock-names = "pclk", "fast_clk";
+				status = "disabled";
+			};
+
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
@@ -806,7 +967,7 @@
 			};
 
 			flexspi1: spi@425e0000 {
-				compatible = "nxp,imx8mm-fspi";
+				compatible = "nxp,imx95-fspi", "nxp,imx8mm-fspi";
 				reg = <0x425e0000 0x10000>, <0x28000000 0x8000000>;
 				reg-names = "fspi_base", "fspi_mmap";
 				#address-cells = <1>;
@@ -886,7 +1047,7 @@
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART7>;
 				clock-names = "ipg";
-				dmas = <&edma2 26 0 FSL_EDMA_RX>, <&edma2 25 0 0>;
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -898,7 +1059,7 @@
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART8>;
 				clock-names = "ipg";
-				dmas = <&edma2 28 0 FSL_EDMA_RX>, <&edma2 27 0 0>;
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -1073,7 +1234,7 @@
 				assigned-clock-rates = <400000000>;
 				bus-width = <8>;
 				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1090,7 +1251,7 @@
 				assigned-clock-rates = <400000000>;
 				bus-width = <4>;
 				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1107,7 +1268,7 @@
 				assigned-clock-rates = <400000000>;
 				bus-width = <4>;
 				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 		};
@@ -1125,6 +1286,7 @@
 				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&scmi_iomuxc 0 4 32>;
+			ngpios = <32>;
 		};
 
 		gpio3: gpio@43820000 {
@@ -1141,6 +1303,7 @@
 			clock-names = "gpio", "port";
 			gpio-ranges = <&scmi_iomuxc 0 104 8>, <&scmi_iomuxc 8 74 18>,
 				      <&scmi_iomuxc 26 42 2>, <&scmi_iomuxc 28 0 4>;
+			ngpios = <32>;
 		};
 
 		gpio4: gpio@43840000 {
@@ -1156,6 +1319,7 @@
 				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&scmi_iomuxc 0 46 28>, <&scmi_iomuxc 28 44 2>;
+			ngpios = <30>;
 		};
 
 		gpio5: gpio@43850000 {
@@ -1171,6 +1335,7 @@
 				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&scmi_iomuxc 0 92 12>, <&scmi_iomuxc 12 36 6>;
+			ngpios = <18>;
 		};
 
 		aips1: bus@44000000 {
@@ -1229,6 +1394,15 @@
 				status = "disabled";
 			};
 
+			system_counter: timer@44290000 {
+				compatible = "nxp,imx95-sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
 			tpm1: pwm@44310000 {
 				compatible = "fsl,imx7ulp-pwm";
 				reg = <0x44310000 0x1000>;
@@ -1245,6 +1419,18 @@
 				status = "disabled";
 			};
 
+			i3c1: i3c@44330000 {
+				compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_I3C1SLOW>;
+				clock-names = "pclk", "fast_clk";
+				status = "disabled";
+			};
+
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
@@ -1379,6 +1565,7 @@
 					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_ADC>;
 				clock-names = "ipg";
+				#io-channel-cells = <1>;
 				status = "disabled";
 			};
 
@@ -1439,6 +1626,13 @@
 			};
 		};
 
+		mailbox@47300000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
 		mailbox@47320000 {
 			compatible = "fsl,imx95-mu-v2x";
 			reg = <0x0 0x47320000 0x0 0x10000>;
@@ -1446,6 +1640,20 @@
 			#mbox-cells = <2>;
 		};
 
+		mailbox@47330000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47340000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47340000 0x0 0x10000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
 		mailbox@47350000 {
 			compatible = "fsl,imx95-mu-v2x";
 			reg = <0x0 0x47350000 0x0 0x10000>;
@@ -1467,9 +1675,29 @@
 				 <&scmi_clk IMX95_CLK_M33>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&scmi_iomuxc 0 112 16>;
+			ngpios = <16>;
 			status = "disabled";
 		};
 
+		ocotp: efuse@47510000 {
+			compatible = "fsl,imx95-ocotp", "syscon";
+			reg = <0x0 0x47510000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth_mac0: mac-address@0 {
+				reg = <0x0514 0x6>;
+			};
+
+			eth_mac1: mac-address@1 {
+				reg = <0x1514 0x6>;
+			};
+
+			eth_mac2: mac-address@2 {
+				reg = <0x2514 0x6>;
+			};
+		};
+
 		elemu0: mailbox@47520000 {
 			compatible = "fsl,imx95-mu-ele";
 			reg = <0x0 0x47520000 0x0 0x10000>;
@@ -1537,12 +1765,85 @@
 			};
 		};
 
+		usb3: usb@4c010010 {
+			compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3";
+			reg = <0x0 0x4c010010 0x0 0x04>,
+			      <0x0 0x4c1f0000 0x0 0x20>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_32K>;
+			clock-names = "hsio", "suspend";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+			status = "disabled";
+
+			usb3_dwc3: usb@4c100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x4c100000 0x0 0x10000>;
+				clocks = <&scmi_clk IMX95_CLK_HSIO>,
+					 <&scmi_clk IMX95_CLK_24M>,
+					 <&scmi_clk IMX95_CLK_32K>;
+				clock-names = "bus_early", "ref", "suspend";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
+				iommus = <&smmu 0xe>;
+			};
+		};
+
+		hsio_blk_ctl: syscon@4c0100c0 {
+			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
+			reg = <0x0 0x4c0100c0 0x0 0x1>;
+			#clock-cells = <1>;
+			clocks = <&clk_sys100m>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+		};
+
+		usb3_phy: phy@4c1f0040 {
+			compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy";
+			reg = <0x0 0x4c1f0040 0x0 0x40>,
+			      <0x0 0x4c1fc000 0x0 0x100>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>;
+			clock-names = "phy";
+			#phy-cells = <0>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		usb2: usb@4c200000 {
+			compatible = "fsl,imx95-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x0 0x4c200000 0x0 0x200>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_32K>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			iommus = <&smmu 0xf>;
+			phys = <&usbphynop>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			fsl,usbmisc = <&usbmisc 0>;
+			status = "disabled";
+		};
+
+		usbmisc: usbmisc@4c200200 {
+			compatible = "fsl,imx95-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x0 0x4c200200 0x0 0x200>,
+			      <0x0 0x4c010014 0x0 0x04>;
+			#index-cells = <1>;
+		};
+
 		pcie0: pcie@4c300000 {
 			compatible = "fsl,imx95-pcie";
 			reg = <0 0x4c300000 0 0x10000>,
 			      <0 0x60100000 0 0xfe00000>,
 			      <0 0x4c360000 0 0x10000>,
-			      <0 0x4c340000 0 0x2000>;
+			      <0 0x4c340000 0 0x4000>;
 			reg-names = "dbi", "config", "atu", "app";
 			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
 				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
@@ -1564,15 +1865,22 @@
 			clocks = <&scmi_clk IMX95_CLK_HSIO>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
-			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
-			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-					 <&scmi_clk IMX95_CLK_HSIOPLL>,
-					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
 			assigned-clock-parents = <0>, <0>,
 						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
 			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			/* pcie0's Devid(BIT[7:6]) is 0x00, stream id(BIT[5:0]) is 0x10~0x17 */
+			msi-map = <0x0 &its 0x10 0x1>,
+				  <0x100 &its 0x11 0x7>;
+			iommu-map = <0x000 &smmu 0x10 0x1>,
+				    <0x100 &smmu 0x11 0x7>;
+			iommu-map-mask = <0x1ff>;
 			fsl,max-link-speed = <3>;
 			status = "disabled";
 		};
@@ -1582,24 +1890,25 @@
 			reg = <0 0x4c300000 0 0x10000>,
 			      <0 0x4c360000 0 0x1000>,
 			      <0 0x4c320000 0 0x1000>,
-			      <0 0x4c340000 0 0x2000>,
+			      <0 0x4c340000 0 0x4000>,
 			      <0 0x4c370000 0 0x10000>,
 			      <0x9 0 1 0>;
 			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
 			num-lanes = <1>;
-			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "dma";
 			clocks = <&scmi_clk IMX95_CLK_HSIO>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
 				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
-			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-					 <&scmi_clk IMX95_CLK_HSIOPLL>,
-					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
 			assigned-clock-parents = <0>, <0>,
 						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x10 0x1>;
 			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
 			status = "disabled";
 		};
@@ -1609,7 +1918,7 @@
 			reg = <0 0x4c380000 0 0x10000>,
 			      <8 0x80100000 0 0xfe00000>,
 			      <0 0x4c3e0000 0 0x10000>,
-			      <0 0x4c3c0000 0 0x2000>;
+			      <0 0x4c3c0000 0 0x4000>;
 			reg-names = "dbi", "config", "atu", "app";
 			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
 				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>;
@@ -1631,15 +1940,24 @@
 			clocks = <&scmi_clk IMX95_CLK_HSIO>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
-			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
-			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-					 <&scmi_clk IMX95_CLK_HSIOPLL>,
-					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
 			assigned-clock-parents = <0>, <0>,
 						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
 			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			/* pcie1's Devid(BIT[7:6]) is 0x10, stream id(BIT[5:0]) is 0x18~0x1f */
+			msi-map = <0x0 &its 0x98 0x1>,
+				  <0x100 &its 0x99 0x7>;
+			msi-map-mask = <0x1ff>;
+			/* smmu have not Devid(BIT[7:6]) */
+			iommu-map = <0x000 &smmu 0x18 0x1>,
+				    <0x100 &smmu 0x19 0x7>;
+			iommu-map-mask = <0x1ff>;
 			fsl,max-link-speed = <3>;
 			status = "disabled";
 		};
@@ -1649,7 +1967,7 @@
 			reg = <0 0x4c380000 0 0x10000>,
 			      <0 0x4c3e0000 0 0x1000>,
 			      <0 0x4c3a0000 0 0x1000>,
-			      <0 0x4c3c0000 0 0x2000>,
+			      <0 0x4c3c0000 0 0x4000>,
 			      <0 0x4c3f0000 0 0x10000>,
 			      <0xa 0 1 0>;
 			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
@@ -1661,19 +1979,63 @@
 				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
 				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
-			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-					 <&scmi_clk IMX95_CLK_HSIOPLL>,
-					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
 			assigned-clock-parents = <0>, <0>,
 						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x98 0x1>;
 			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
 			status = "disabled";
 		};
 
+		vpu_blk_ctrl: clock-controller@4c410000 {
+			compatible = "nxp,imx95-vpu-csr", "syscon";
+			reg = <0x0 0x4c410000 0x0 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&scmi_clk IMX95_CLK_VPUAPB>;
+			power-domains = <&scmi_devpd IMX95_PD_VPU>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_VPUAPB>,
+					  <&scmi_clk IMX95_CLK_VPU>,
+					  <&scmi_clk IMX95_CLK_VPUJPEG>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>;
+			assigned-clock-rates = <133333333>, <667000000>, <500000000>;
+		};
+
+		jpegdec: jpegdec@4c500000 {
+			compatible = "nxp,imx95-jpgdec", "nxp,imx8qxp-jpgdec";
+			reg = <0x0 0x4C500000 0x0 0x00050000>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_VPU>,
+				 <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+			assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
+			power-domains = <&scmi_devpd IMX95_PD_VPU>;
+		};
+
+		jpegenc: jpegenc@4c550000 {
+			compatible = "nxp,imx95-jpgenc", "nxp,imx8qxp-jpgenc";
+			reg = <0x0 0x4C550000 0x0 0x00050000>;
+			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_VPU>,
+				 <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
+			assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
+			power-domains = <&scmi_devpd IMX95_PD_VPU>;
+		};
+
 		netcmix_blk_ctrl: syscon@4c810000 {
 			compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon";
-			reg = <0x0 0x4c810000 0x0 0x10000>;
+			reg = <0x0 0x4c810000 0x0 0x8>;
 			#clock-cells = <1>;
 			clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
 			assigned-clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>;
@@ -1697,6 +2059,123 @@
 			status = "disabled";
 		};
 
+		netc_blk_ctrl: system-controller@4cde0000 {
+			compatible = "nxp,imx95-netc-blk-ctrl";
+			reg = <0x0 0x4cde0000 0x0 0x10000>,
+			      <0x0 0x4cdf0000 0x0 0x10000>,
+			      <0x0 0x4c81000c 0x0 0x18>;
+			reg-names = "ierb", "prb", "netcmix";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			power-domains = <&scmi_devpd IMX95_PD_NETC>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_ENET>,
+					  <&scmi_clk IMX95_CLK_ENETREF>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>;
+			assigned-clock-rates = <666666666>, <250000000>;
+			clocks = <&scmi_clk IMX95_CLK_ENET>;
+			clock-names = "ipg";
+			status = "disabled";
+
+			netc_bus0: pcie@4ca00000 {
+				compatible = "pci-host-ecam-generic";
+				reg = <0x0 0x4ca00000 0x0 0x100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				bus-range = <0x0 0x0>;
+				msi-map = <0x0 &its 0x60 0x1>,	//ENETC0 PF
+					  <0x10 &its 0x61 0x1>, //ENETC0 VF0
+					  <0x20 &its 0x62 0x1>, //ENETC0 VF1
+					  <0x40 &its 0x63 0x1>, //ENETC1 PF
+					  <0x80 &its 0x64 0x1>, //ENETC2 PF
+					  <0x90 &its 0x65 0x1>, //ENETC2 VF0
+					  <0xa0 &its 0x66 0x1>, //ENETC2 VF1
+					  <0xc0 &its 0x67 0x1>; //NETC Timer
+				iommu-map = <0x0 &smmu 0x20 0x1>,
+					    <0x10 &smmu 0x21 0x1>,
+					    <0x20 &smmu 0x22 0x1>,
+					    <0x40 &smmu 0x23 0x1>,
+					    <0x80 &smmu 0x24 0x1>,
+					    <0x90 &smmu 0x25 0x1>,
+					    <0xa0 &smmu 0x26 0x1>,
+					    <0xc0 &smmu 0x27 0x1>;
+					 /* ENETC0~2 and Timer BAR0 - non-prefetchable memory */
+				ranges = <0x82000000 0x0 0x4cc00000  0x0 0x4cc00000  0x0 0xe0000
+					 /* Timer BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd00000  0x0 0x4cd00000  0x0 0x10000
+					 /* ENETC0~2: VF0-1 BAR0 - non-prefetchable memory */
+					 0x82000000 0x0 0x4cd20000  0x0 0x4cd20000  0x0 0x60000
+					 /* ENETC0~2: VF0-1 BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd80000  0x0 0x4cd80000  0x0 0x60000>;
+
+				enetc_port0: ethernet@0,0 {
+					compatible = "pci1131,e101";
+					reg = <0x000000 0 0 0 0>;
+					clocks = <&scmi_clk IMX95_CLK_ENETREF>;
+					clock-names = "ref";
+					status = "disabled";
+				};
+
+				enetc_port1: ethernet@8,0 {
+					compatible = "pci1131,e101";
+					reg = <0x004000 0 0 0 0>;
+					clocks = <&scmi_clk IMX95_CLK_ENETREF>;
+					clock-names = "ref";
+					status = "disabled";
+				};
+
+				enetc_port2: ethernet@10,0 {
+					compatible = "pci1131,e101";
+					reg = <0x008000 0 0 0 0>;
+					status = "disabled";
+				};
+
+				netc_timer: ethernet@18,0 {
+					compatible = "pci1131,ee02";
+					reg = <0x00c000 0 0 0 0>;
+					status = "disabled";
+				};
+			};
+
+			netc_bus1: pcie@4cb00000 {
+				compatible = "pci-host-ecam-generic";
+				reg = <0x0 0x4cb00000 0x0 0x100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				bus-range = <0x1 0x1>;
+					 /* EMDIO BAR0 - non-prefetchable memory */
+				ranges = <0x82000000 0x0 0x4cce0000  0x0 0x4cce0000  0x0 0x20000
+					 /* EMDIO BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd10000  0x0 0x4cd10000  0x0 0x10000>;
+
+				netc_emdio: mdio@0,0 {
+					compatible = "pci1131,ee00";
+					reg = <0x010000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
+		gpu: gpu@4d900000 {
+			compatible = "nxp,imx95-mali", "arm,mali-valhall-csf";
+			reg = <0 0x4d900000 0 0x480000>;
+			clocks = <&scmi_clk IMX95_CLK_GPU>, <&scmi_clk IMX95_CLK_GPUAPB>;
+			clock-names = "core", "coregroup";
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&scmi_devpd IMX95_PD_GPU>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <1013>;
+		};
+
 		ddr-pmu@4e090dc0 {
 			compatible = "fsl,imx95-ddr-pmu", "fsl,imx93-ddr-pmu";
 			reg = <0x0 0x4e090dc0 0x0 0x200>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 58e3865c2889..225cd2f1220b 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -136,11 +136,18 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	sound {
+	sound: sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
 		ssi-controller = <&sai3>;
 		audio-codec = <&tlv320aic3x04>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/mba8xx.dtsi b/arch/arm64/boot/dts/freescale/mba8xx.dtsi
index 276d1683b03b..f534dab44e8e 100644
--- a/arch/arm64/boot/dts/freescale/mba8xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8xx.dtsi
@@ -36,6 +36,13 @@
 		stdout-path = &lpuart1;
 	};
 
+	/* Non-controllable PCIe reference clock generator */
+	pcie_refclk: clock-pcie-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -121,6 +128,13 @@
 		model = "tqm-tlv320aic32";
 		audio-codec = <&tlv320aic3x04>;
 		ssi-controller = <&sai1>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
 	};
 };
 
@@ -208,6 +222,12 @@
 	status = "okay";
 };
 
+&hsio_phy {
+	fsl,hsio-cfg = "pciea-x2-pcieb";
+	fsl,refclk-pad-mode = "input";
+	status = "okay";
+};
+
 &i2c1 {
 	tlv320aic3x04: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
@@ -309,7 +329,15 @@
 			  "", "", "", "";
 };
 
-/* TODO: Mini-PCIe */
+&pcieb {
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_1v5>;
+	status = "okay";
+};
 
 &sai1 {
 	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
@@ -467,10 +495,10 @@
 		fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000020>;
 	};
 
-	pinctrl_pcieb: pcieagrp {
-		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000041>,
-			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000041>,
-			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000041>;
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00		0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02		0x04000041>;
 	};
 
 	pinctrl_reg_pcie_1v5: regpcie1v5grp {
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 7be430b78c83..51d00dac12de 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -3,7 +3,7 @@
  * NXP S32G2 SoC family
  *
  * Copyright (c) 2021 SUSE LLC
- * Copyright 2017-2021, 2024 NXP
+ * Copyright 2017-2021, 2024-2025 NXP
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -114,6 +114,14 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0x80000000>;
 
+		rtc0: rtc@40060000 {
+			compatible = "nxp,s32g2-rtc";
+			reg = <0x40060000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 54>, <&clks 55>;
+			clock-names = "ipg", "source0";
+		};
+
 		pinctrl: pinctrl@4009c240 {
 			compatible = "nxp,s32g2-siul2-pinctrl";
 				/* MSCR0-MSCR101 registers on siul2_0 */
@@ -317,6 +325,124 @@
 			};
 		};
 
+		ocotp: nvmem@400a4000 {
+			compatible = "nxp,s32g2-ocotp";
+			reg = <0x400a4000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		swt0: watchdog@40100000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40100000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt1: watchdog@40104000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40104000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt2: watchdog@40108000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40108000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt3: watchdog@4010c000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x4010c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm0: timer@4011c000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x4011c000 0x3000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm1: timer@40120000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40120000 0x3000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm2: timer@40124000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40124000 0x3000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm3: timer@40128000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40128000 0x3000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		edma0: dma-controller@40144000 {
+			compatible = "nxp,s32g2-edma";
+			reg = <0x40144000 0x24000>,
+			      <0x4012c000 0x3000>,
+			      <0x40130000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can0: can@401b4000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x401b4000 0xa000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@401be000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x401be000 0xa000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		uart0: serial@401c8000 {
 			compatible = "nxp,s32g2-linflexuart",
 				     "fsl,s32v234-linflexuart";
@@ -333,6 +459,195 @@
 			status = "disabled";
 		};
 
+		usbmisc: usbmisc@44064200 {
+			#index-cells = <1>;
+			compatible = "nxp,s32g2-usbmisc";
+			reg = <0x44064200 0x200>;
+		};
+
+		usbotg: usb@44064000 {
+			compatible = "nxp,s32g2-usb";
+			reg = <0x44064000 0x200>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
+					 <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
+			clocks = <&clks 94>, <&clks 95>;
+			fsl,usbmisc = <&usbmisc 0>;
+			ahb-burst-config = <0x3>;
+			tx-burst-size-dword = <0x10>;
+			rx-burst-size-dword = <0x10>;
+			phy_type = "ulpi";
+			dr_mode = "host";
+			maximum-speed = "high-speed";
+			status = "disabled";
+		};
+
+		spi0: spi@401d4000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x401d4000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <8>;
+			bus-num = <0>;
+			dmas = <&edma0 0 7>, <&edma0 0 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi1: spi@401d8000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x401d8000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			dmas = <&edma0 0 10>, <&edma0 0 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi2: spi@401dc000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x401dc000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			dmas = <&edma0 0 13>, <&edma0 0 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@401e4000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x401e4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c1: i2c@401e8000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x401e8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c2: i2c@401ec000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x401ec000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		swt4: watchdog@40200000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40200000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt5: watchdog@40204000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40204000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt6: watchdog@40208000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40208000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm4: timer@4021c000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x4021c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm5: timer@40220000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40220000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm6: timer@40224000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40224000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		edma1: dma-controller@40244000 {
+			compatible = "nxp,s32g2-edma";
+			reg = <0x40244000 0x24000>,
+			      <0x4022c000 0x3000>,
+			      <0x40230000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can2: can@402a8000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x402a8000 0xa000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can3: can@402b2000 {
+			compatible = "nxp,s32g2-flexcan";
+			reg = <0x402b2000 0xa000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		uart2: serial@402bc000 {
 			compatible = "nxp,s32g2-linflexuart",
 				     "fsl,s32v234-linflexuart";
@@ -341,6 +656,67 @@
 			status = "disabled";
 		};
 
+		spi3: spi@402c8000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x402c8000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <3>;
+			dmas = <&edma0 1 7>, <&edma0 1 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi4: spi@402cc000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x402cc000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <4>;
+			dmas = <&edma0 1 10>, <&edma0 1 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi5: spi@402d0000 {
+			compatible = "nxp,s32g2-dspi";
+			reg = <0x402d0000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <5>;
+			dmas = <&edma0 1 13>, <&edma0 1 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c3: i2c@402d8000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x402d8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c4: i2c@402dc000 {
+			compatible = "nxp,s32g2-i2c";
+			reg = <0x402dc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
 		usdhc0: mmc@402f0000 {
 			compatible = "nxp,s32g2-usdhc";
 			reg = <0x402f0000 0x1000>;
@@ -351,6 +727,62 @@
 			status = "disabled";
 		};
 
+		gmac0: ethernet@4033c000 {
+			compatible = "nxp,s32g2-dwmac";
+			reg = <0x4033c000 0x2000>, /* gmac IP */
+			      <0x4007c004 0x4>;    /* GMAC_0_CTRL_STS */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+			status = "disabled";
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <5>;
+
+				queue0 {
+				};
+
+				queue1 {
+				};
+
+				queue2 {
+				};
+
+				queue3 {
+				};
+
+				queue4 {
+				};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <5>;
+
+				queue0 {
+				};
+
+				queue1 {
+				};
+
+				queue2 {
+				};
+
+				queue3 {
+				};
+
+				queue4 {
+				};
+			};
+
+			gmac0mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gic: interrupt-controller@50800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x50800000 0x10000>,
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
index b9a119eea2b7..aa40a52f8e53 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
@@ -1,18 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (c) 2021 SUSE LLC
- * Copyright 2019-2021, 2024 NXP
+ * Copyright 2019-2021, 2024-2025 NXP
  */
 
 /dts-v1/;
 
 #include "s32g2.dtsi"
+#include "s32gxxxa-evb.dtsi"
 
 / {
 	model = "NXP S32G2 Evaluation Board (S32G-VNP-EVB)";
 	compatible = "nxp,s32g274a-evb", "nxp,s32g2";
 
 	aliases {
+		ethernet0 = &gmac0;
 		serial0 = &uart0;
 	};
 
@@ -42,3 +44,18 @@
 	no-1-8-v;
 	status = "okay";
 };
+
+&gmac0 {
+	clocks = <&clks 24>, <&clks 19>, <&clks 18>, <&clks 15>;
+	clock-names = "stmmaceth", "tx", "rx", "ptp_ref";
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmiiaphy4>;
+	status = "okay";
+};
+
+&gmac0mdio {
+	/* KSZ 9031 on RGMII */
+	rgmiiaphy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
index aaa61a8ad0da..ee3121b192e5 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
@@ -7,12 +7,14 @@
 /dts-v1/;
 
 #include "s32g2.dtsi"
+#include "s32gxxxa-rdb.dtsi"
 
 / {
 	model = "NXP S32G2 Reference Design Board 2 (S32G-VNP-RDB2)";
 	compatible = "nxp,s32g274a-rdb2", "nxp,s32g2";
 
 	aliases {
+		ethernet0 = &gmac0;
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};
@@ -39,6 +41,26 @@
 	status = "okay";
 };
 
+&stm0 {
+	status = "okay";
+};
+
+&stm1 {
+	status = "okay";
+};
+
+&stm2 {
+	status = "okay";
+};
+
+&stm3 {
+	status = "okay";
+};
+
+&swt0 {
+	status = "okay";
+};
+
 &usdhc0 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc0>;
@@ -56,3 +78,18 @@
 	no-1-8-v;
 	status = "okay";
 };
+
+&gmac0 {
+	clocks = <&clks 24>, <&clks 19>, <&clks 18>, <&clks 15>;
+	clock-names = "stmmaceth", "tx", "rx", "ptp_ref";
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmiiaphy1>;
+	status = "okay";
+};
+
+&gmac0mdio {
+	/* KSZ 9031 on RGMII */
+	rgmiiaphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
index 6c572ffe37ca..eff7673e7f34 100644
--- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
- * Copyright 2021-2024 NXP
+ * Copyright 2021-2025 NXP
  *
  * Authors: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
  *          Ciprian Costea <ciprianmarian.costea@nxp.com>
@@ -171,6 +171,15 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0x80000000>;
 
+		rtc0: rtc@40060000 {
+			compatible = "nxp,s32g3-rtc",
+				     "nxp,s32g2-rtc";
+			reg = <0x40060000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 54>, <&clks 55>;
+			clock-names = "ipg", "source0";
+		};
+
 		pinctrl: pinctrl@4009c240 {
 			compatible = "nxp,s32g2-siul2-pinctrl";
 				/* MSCR0-MSCR101 registers on siul2_0 */
@@ -374,6 +383,126 @@
 			};
 		};
 
+		ocotp: nvmem@400a4000 {
+			compatible = "nxp,s32g3-ocotp", "nxp,s32g2-ocotp";
+			reg = <0x400a4000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		swt0: watchdog@40100000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40100000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt1: watchdog@40104000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40104000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt2: watchdog@40108000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40108000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt3: watchdog@4010c000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4010c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm0: timer@4011c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4011c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm1: timer@40120000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40120000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm2: timer@40124000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40124000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm3: timer@40128000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40128000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		edma0: dma-controller@40144000 {
+			compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
+			reg = <0x40144000 0x24000>,
+			      <0x4012c000 0x3000>,
+			      <0x40130000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can0: can@401b4000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x401b4000 0xa000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@401be000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x401be000 0xa000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		uart0: serial@401c8000 {
 			compatible = "nxp,s32g3-linflexuart",
 				     "fsl,s32v234-linflexuart";
@@ -390,6 +519,208 @@
 			status = "disabled";
 		};
 
+		usbmisc: usbmisc@44064200 {
+			#index-cells = <1>;
+			compatible = "nxp,s32g3-usbmisc";
+			reg = <0x44064200 0x200>;
+		};
+
+                usbotg: usb@44064000 {
+                        compatible = "nxp,s32g3-usb", "nxp,s32g2-usb";
+                        reg = <0x44064000 0x200>;
+                        interrupt-parent = <&gic>;
+                        interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
+                                     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
+                        clocks = <&clks 94>, <&clks 95>;
+                        fsl,usbmisc = <&usbmisc 0>;
+                        ahb-burst-config = <0x3>;
+                        tx-burst-size-dword = <0x10>;
+                        rx-burst-size-dword = <0x10>;
+                        phy_type = "ulpi";
+                        dr_mode = "host";
+                        maximum-speed = "high-speed";
+                        status = "disabled";
+                };
+
+		spi0: spi@401d4000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x401d4000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <8>;
+			bus-num = <0>;
+			dmas = <&edma0 0 7>, <&edma0 0 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi1: spi@401d8000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x401d8000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			dmas = <&edma0 0 10>, <&edma0 0 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi2: spi@401dc000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x401dc000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			dmas = <&edma0 0 13>, <&edma0 0 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@401e4000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x401e4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c1: i2c@401e8000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x401e8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c2: i2c@401ec000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x401ec000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		swt4: watchdog@40200000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40200000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt5: watchdog@40204000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40204000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt6: watchdog@40208000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40208000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt7: watchdog@4020C000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4020C000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm4: timer@4021c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4021c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm5: timer@40220000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40220000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm6: timer@40224000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40224000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		edma1: dma-controller@40244000 {
+			compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
+			reg = <0x40244000 0x24000>,
+			      <0x4022c000 0x3000>,
+			      <0x40230000 0x3000>;
+			#dma-cells = <2>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx-0-15",
+					  "tx-16-31",
+					  "err";
+			clocks = <&clks 63>, <&clks 64>;
+			clock-names = "dmamux0", "dmamux1";
+		};
+
+		can2: can@402a8000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x402a8000 0xa000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can3: can@402b2000 {
+			compatible = "nxp,s32g3-flexcan",
+					   "nxp,s32g2-flexcan";
+			reg = <0x402b2000 0xa000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mb-0", "state", "berr", "mb-1";
+			clocks = <&clks 9>, <&clks 11>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		uart2: serial@402bc000 {
 			compatible = "nxp,s32g3-linflexuart",
 				     "fsl,s32v234-linflexuart";
@@ -398,6 +729,69 @@
 			status = "disabled";
 		};
 
+		spi3: spi@402c8000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x402c8000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <3>;
+			dmas = <&edma0 1 7>, <&edma0 1 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi4: spi@402cc000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x402cc000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <4>;
+			dmas = <&edma0 1 10>, <&edma0 1 11>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi5: spi@402d0000 {
+			compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+			reg = <0x402d0000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 26>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <5>;
+			dmas = <&edma0 1 13>, <&edma0 1 14>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c3: i2c@402d8000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x402d8000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		i2c4: i2c@402dc000 {
+			compatible = "nxp,s32g3-i2c",
+				     "nxp,s32g2-i2c";
+			reg = <0x402dc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 40>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
 		usdhc0: mmc@402f0000 {
 			compatible = "nxp,s32g3-usdhc",
 				     "nxp,s32g2-usdhc";
@@ -410,6 +804,130 @@
 			status = "disabled";
 		};
 
+		gmac0: ethernet@4033c000 {
+			compatible = "nxp,s32g2-dwmac";
+			reg = <0x4033c000 0x2000>, /* gmac IP */
+			      <0x4007c004 0x4>;    /* GMAC_0_CTRL_STS */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+			status = "disabled";
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <5>;
+
+				queue0 {
+				};
+
+				queue1 {
+				};
+
+				queue2 {
+				};
+
+				queue3 {
+				};
+
+				queue4 {
+				};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <5>;
+
+				queue0 {
+				};
+
+				queue1 {
+				};
+
+				queue2 {
+				};
+
+				queue3 {
+				};
+
+				queue4 {
+				};
+			};
+
+			gmac0mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		swt8: watchdog@40500000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <40500000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt9: watchdog@40504000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40504000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt10: watchdog@40508000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40508000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt11: watchdog@4050c000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4050c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm8: timer@40520000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40520000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm9: timer@40524000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40524000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm10: timer@40528000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40528000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm11: timer@4052c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4052c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@50800000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
index 828e353455b5..326322b62192 100644
--- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
+++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
- * Copyright 2021-2024 NXP
+ * Copyright 2021-2025 NXP
  *
  * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)
  */
@@ -8,12 +8,14 @@
 /dts-v1/;
 
 #include "s32g3.dtsi"
+#include "s32gxxxa-rdb.dtsi"
 
 / {
 	model = "NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)";
 	compatible = "nxp,s32g399a-rdb3", "nxp,s32g3";
 
 	aliases {
+		ethernet0 = &gmac0;
 		mmc0 = &usdhc0;
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -39,6 +41,50 @@
 	status = "okay";
 };
 
+&stm0 {
+	status = "okay";
+};
+
+&stm1 {
+	status = "okay";
+};
+
+&stm2 {
+	status = "okay";
+};
+
+&stm3 {
+	status = "okay";
+};
+
+&stm4 {
+	status = "okay";
+};
+
+&stm5 {
+	status = "okay";
+};
+
+&stm6 {
+	status = "okay";
+};
+
+&stm8 {
+	status = "okay";
+};
+
+&swt0 {
+	status = "okay";
+};
+
+&i2c4 {
+	current-sensor@40 {
+		compatible = "ti,ina231";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+};
+
 &usdhc0 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc0>;
@@ -48,3 +94,18 @@
 	disable-wp;
 	status = "okay";
 };
+
+&gmac0 {
+	clocks = <&clks 24>, <&clks 19>, <&clks 18>, <&clks 15>;
+	clock-names = "stmmaceth", "tx", "rx", "ptp_ref";
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmiiaphy1>;
+	status = "okay";
+};
+
+&gmac0mdio {
+	/* KSZ 9031 on RGMII */
+	rgmiiaphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi
new file mode 100644
index 000000000000..f1969cdcef19
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2024 NXP
+ *
+ * Authors: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
+ *          Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
+ *          Larisa Grigore <larisa.grigore@nxp.com>
+ */
+
+&pinctrl {
+	can0_pins: can0-pins {
+		can0-grp0 {
+			pinmux = <0x2c1>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp1 {
+			pinmux = <0x2b0>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp2 {
+			pinmux = <0x2012>;
+		};
+	};
+
+	can2_pins: can2-pins {
+		can2-grp0 {
+			pinmux = <0x1b2>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can2-grp1 {
+			pinmux = <0x1c0>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can2-grp2 {
+			pinmux = <0x2782>;
+		};
+	};
+
+	can3_pins: can3-pins {
+		can3-grp0 {
+			pinmux = <0x192>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can3-grp1 {
+			pinmux = <0x1a0>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can3-grp2 {
+			pinmux = <0x2792>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0-grp0 {
+			pinmux = <0x101>, <0x111>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-grp1 {
+			pinmux = <0x2352>, <0x2362>;
+		};
+	};
+
+	i2c0_gpio_pins: i2c0-gpio-pins {
+		i2c0-gpio-grp0 {
+			pinmux = <0x100>, <0x110>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-gpio-grp1 {
+			pinmux = <0x2350>, <0x2360>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		i2c1-grp0 {
+			pinmux = <0x131>, <0x141>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c1-grp1 {
+			pinmux = <0x2cd2>, <0x2ce2>;
+		};
+	};
+
+	i2c1_gpio_pins: i2c1-gpio-pins {
+		i2c1-gpio-grp0 {
+			pinmux = <0x130>, <0x140>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c1-gpio-grp1 {
+			pinmux = <0x2cd0>, <0x2ce0>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		i2c2-grp0 {
+			pinmux = <0x151>, <0x161>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c2-grp1 {
+			pinmux = <0x2cf2>, <0x2d02>;
+		};
+	};
+
+	i2c2_gpio_pins: i2c2-gpio-pins {
+		i2c2-gpio-grp0 {
+			pinmux = <0x150>, <0x160>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c2-gpio-grp1 {
+			pinmux = <0x2cf0>, <0x2d00>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		i2c4-grp0 {
+			pinmux = <0x211>, <0x222>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-grp1 {
+			pinmux = <0x2d43>, <0x2d33>;
+		};
+	};
+
+	i2c4_gpio_pins: i2c4-gpio-pins {
+		i2c4-gpio-grp0 {
+			pinmux = <0x210>, <0x220>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-gpio-grp1 {
+			pinmux = <0x2d40>, <0x2d30>;
+		};
+	};
+
+	dspi1_pins: dspi1-pins {
+		dspi1-grp0 {
+			pinmux = <0x72>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp1 {
+			pinmux = <0x62>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp2 {
+			pinmux = <0x83>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp3 {
+			pinmux = <0x5F0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp4 {
+			pinmux = <0x3D92>,
+				 <0x3DA2>,
+				 <0x3DB2>;
+		};
+	};
+
+	dspi5_pins: dspi5-pins {
+		dspi5-grp0 {
+			pinmux = <0x93>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp1 {
+			pinmux = <0xA0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi5-grp2 {
+			pinmux = <0x3ED2>,
+				 <0x3EE2>,
+				 <0x3EF2>;
+		};
+
+		dspi5-grp3 {
+			pinmux = <0xB3>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp4 {
+			pinmux = <0xC3>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can2_pins>;
+	status = "okay";
+};
+
+&can3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can3_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-1 = <&i2c1_gpio_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_gpio_pins>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&i2c4_gpio_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&dspi1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi5 {
+	pinctrl-0 = <&dspi5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
new file mode 100644
index 000000000000..3bc3335c9248
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2024 NXP
+ *
+ * Authors: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
+ *          Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>
+ *          Larisa Grigore <larisa.grigore@nxp.com>
+ */
+
+&pinctrl {
+	can0_pins: can0-pins {
+		can0-grp0 {
+			pinmux = <0x112>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp1 {
+			pinmux = <0x120>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can0-grp2 {
+			pinmux = <0x2013>;
+		};
+	};
+
+	can1_pins: can1-pins {
+		can1-grp0 {
+			pinmux = <0x132>;
+			output-enable;
+			slew-rate = <133>;
+		};
+
+		can1-grp1 {
+			pinmux = <0x140>;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		can1-grp2 {
+			pinmux = <0x2772>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0-grp0 {
+			pinmux = <0x1f2>, <0x201>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-grp1 {
+			pinmux = <0x2353>, <0x2363>;
+		};
+	};
+
+	i2c0_gpio_pins: i2c0-gpio-pins {
+		i2c0-gpio-grp0 {
+			pinmux = <0x1f0>, <0x200>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c0-gpio-grp1 {
+			pinmux = <0x2350>, <0x2360>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		i2c2-grp0 {
+			pinmux = <0x151>, <0x161>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c2-grp1 {
+			pinmux = <0x2cf2>, <0x2d02>;
+		};
+	};
+
+	i2c2_gpio_pins: i2c2-gpio-pins {
+		i2c2-gpio-grp0 {
+			pinmux = <0x2cf0>, <0x2d00>;
+		};
+
+		i2c2-gpio-grp1 {
+			pinmux = <0x150>, <0x160>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		i2c4-grp0 {
+			pinmux = <0x211>, <0x222>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-grp1 {
+			pinmux = <0x2d43>, <0x2d33>;
+		};
+	};
+
+	i2c4_gpio_pins: i2c4-gpio-pins {
+		i2c4-gpio-grp0 {
+			pinmux = <0x210>, <0x220>;
+			drive-open-drain;
+			output-enable;
+			input-enable;
+			slew-rate = <133>;
+		};
+
+		i2c4-gpio-grp1 {
+			pinmux = <0x2d40>, <0x2d30>;
+		};
+	};
+
+	dspi1_pins: dspi1-pins {
+		dspi1-grp0 {
+			pinmux = <0x72>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp1 {
+			pinmux = <0x62>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp2 {
+			pinmux = <0x83>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi1-grp3 {
+			pinmux = <0x5F0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi1-grp4 {
+			pinmux = <0x3D92>,
+				 <0x3DA2>,
+				 <0x3DB2>;
+		};
+	};
+
+	dspi5_pins: dspi5-pins {
+		dspi5-grp0 {
+			pinmux = <0x93>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp1 {
+			pinmux = <0xA0>;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+
+		dspi5-grp2 {
+			pinmux = <0x3ED2>,
+				 <0x3EE2>,
+				 <0x3EF2>;
+		};
+
+		dspi5-grp3 {
+			pinmux = <0xB3>;
+			output-enable;
+			slew-rate = <150>;
+		};
+
+		dspi5-grp4 {
+			pinmux = <0xC3>;
+			output-enable;
+			input-enable;
+			slew-rate = <150>;
+			bias-pull-up;
+		};
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	status = "okay";
+
+	pcal6524: gpio-expander@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca85073a: rtc@51 {
+		compatible = "nxp,pca85073a";
+		reg = <0x51>;
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&dspi1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi5 {
+	pinctrl-0 = <&dspi5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_gpio_pins>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&i2c4_gpio_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/tqma8xx.dtsi b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi
index 366912bf3d5e..58693b774d4c 100644
--- a/arch/arm64/boot/dts/freescale/tqma8xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi
@@ -65,6 +65,7 @@
 		spi-max-frequency = <66000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		vcc-supply = <&reg_1v8>;
 
 		partitions {
 			compatible = "fixed-partitions";
@@ -74,8 +75,6 @@
 	};
 };
 
-/* TODO GPU */
-
 &i2c1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -114,6 +113,15 @@
 	};
 };
 
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+
 &mu_m0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi b/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi
new file mode 100644
index 000000000000..3d20e3bf32ce
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc1;
+		rtc1 = &rtc;
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds0>;
+		/* PWM support still missing */
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds1>;
+		/* PWM support still missing */
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	panel_lvds0: panel-lvds0 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT
+		 */
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_lvds0>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+			};
+		};
+	};
+
+	panel_lvds1: panel-lvds1 {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT
+		 */
+		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_lvds1>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds1: endpoint {
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic3x04>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&flexcan2 {
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan3 {
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&mclkout0_lpcg 0>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	eeprom2: eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&lpspi1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&lpuart3 {
+	status = "okay";
+};
+
+&reg_sdvmmc {
+	off-on-delay-us = <200000>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sdvmmc>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi b/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
new file mode 100644
index 000000000000..2d0a329c2fa5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
@@ -0,0 +1,768 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/delete-node/ &encoder_rpc;
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/*
+		 * DRAM base addr, minimal size : 1024 MiB DRAM
+		 * should be corrected by bootloader
+		 */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_tqma8xxs_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_lvds0: regulator-lvds0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds0>;
+		regulator-name = "LCD0_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds1: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds1>;
+		regulator-name = "LCD1_VDD_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sdvmmc: regulator-sdvmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sdvmmc>;
+		regulator-name = "SD1_VMMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vqmmc: regulator-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * global autoconfigured region for contiguous allocations
+		 * must not exceed memory size and region
+		 */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x96000000 0 0x30000000>;
+			linux,cma-default;
+		};
+
+		decoder_boot: decoder-boot@84000000 {
+			reg = <0 0x84000000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder_boot: encoder-boot@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		m4_reserved: m4@88000000 {
+			no-map;
+			reg = <0 0x88000000 0 0x8000000>;
+			status = "disabled";
+		};
+
+		vdev0vring0: vdev0vring0@90000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev0vring1: vdev0vring1@90008000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev1vring0: vdev1vring0@90010000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdev1vring1: vdev1vring1@90018000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+			status = "disabled";
+		};
+
+		rsc_table: rsc-table@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+			status = "disabled";
+		};
+
+		vdevbuffer: vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+			status = "disabled";
+		};
+
+		decoder_rpc: decoder-rpc@92000000 {
+			reg = <0 0x92000000 0 0x100000>;
+			no-map;
+		};
+
+		encoder_rpc: encoder-rpc@92100000 {
+			reg = <0 0x92100000 0 0x700000>;
+			no-map;
+		};
+	};
+
+};
+
+/* TQMa8XxS only uses industrial grade, reduce trip points accordingly */
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <100000>;
+};
+/* end of temperature grade adjustments */
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio0 24 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+};
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <66000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&lsio_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_fangpio>, <&pinctrl_smarc_mngtpio>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "LID", "SLEEP", "CHARGING#", "CHGPRSNT#",
+			  "BATLOW#", "", "", "",
+			  "", "SMARC_GPIO6", "SMARC_GPIO5", "",
+			  "PHY3 RST#", "", "", "SPI0_CS0",
+			  "", "SPI0_CS1", "", "";
+};
+
+&lsio_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_gpio>;
+
+	gpio-line-names = "LCD1_BLKT_EN", "LCD1_VDD_EN", "LCD0_BLKT_EN", "LCD0_VDD_EN",
+			  "SMARC_GPIO0", "SMARC_GPIO1", "SMARC_GPIO2", "",
+			  "SMARC_GPIO3", "SMARC_GPIO8", "SMARC_GPIO7", "SMARC_GPIO10",
+			  "SMARC_GPIO9", "SMARC_GPIO4", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "RTC_INT#", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "PHY0_RST#", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "PCIE_PERST#", "", "PCIE_WAKE#", "USB_OTG1_PWR",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "SDIO_PWR_EN",
+			  "", "SDIO_WP", "SDIO_CD#", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	pinctrl-1 = <&pinctrl_lpi2c0_gpio>;
+	scl-gpios = <&lsio_gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_tqma8xxs_3v3>;
+	};
+
+	rtc1: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		quartz-load-femtofarads = <7000>;
+		interrupt-parent = <&lsio_gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_tqma8xxs_3v3>;
+	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&lpspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>;
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+};
+
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg 0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic0_thermal: pmic0-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vmmc>;
+	vqmmc-supply = <&reg_vqmmc>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	/* NOTE: CD / WP and VMMC support depends on mainboard */
+};
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight_lvds0: backlight-lvds0grp {
+		fsl,pins = <IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02	0x00000021>;
+	};
+
+	pinctrl_backlight_lvds1: backlight-lvds1grp {
+		fsl,pins = <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00	0x00000021>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX	0x00000021>,
+			   <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX	0x00000021>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX	0x00000021>,
+			   <IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX	0x00000021>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30	0x00000040>,
+			   <IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22		0x00000040>;
+	};
+
+	pinctrl_ethphy1: ethphy1grp {
+		fsl,pins = <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14		0x00000040>,
+			   <IMX8QXP_UART1_CTS_B_LSIO_GPIO0_IO24		0x00000040>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000040>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000040>,
+			   <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x00000040>,
+			   <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x00000040>,
+			   <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x00000040>,
+			   <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000040>,
+			   <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x00000040>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3	0x0000004d>,
+			   <IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS		0x0000004d>,
+			   <IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B	0x0000004d>,
+			   <IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2	0x0000004d>,
+			   <IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B	0x0000004d>,
+			   <IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B	0x0000004d>;
+	};
+
+	pinctrl_smarc_gpio: smarcgpiogrp {
+		fsl,pins = /* SMARC_GPIO0 / CAM0_PWR# */
+			   <IMX8QXP_SPI0_SCK_LSIO_GPIO1_IO04	0x00000021>,
+			   /* SMARC_GPIO1 / CAM1_PWR# */
+			   <IMX8QXP_SPI0_SDI_LSIO_GPIO1_IO05	0x00000021>,
+			   /* SMARC_GPIO2 / CAM0_RST# */
+			   <IMX8QXP_SPI0_SDO_LSIO_GPIO1_IO06	0x00000021>,
+			   /* SMARC_GPIO3 / CAM1_RST# */
+			   <IMX8QXP_SPI0_CS0_LSIO_GPIO1_IO08	0x00000021>,
+			   /* SMARC_GPIO4 / HDA_RST# */
+			   <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13	0x00000021>,
+			   /* SMARC_GPIO7 */
+			   <IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10	0x00000021>,
+			   /* SMARC_GPIO8 */
+			   <IMX8QXP_ADC_IN1_LSIO_GPIO1_IO09	0x00000021>,
+			   /* SMARC_GPIO9 */
+			   <IMX8QXP_ADC_IN2_LSIO_GPIO1_IO12	0x00000021>,
+			   /* SMARC_GPIO10 */
+			   <IMX8QXP_ADC_IN3_LSIO_GPIO1_IO11	0x00000021>;
+	};
+
+	pinctrl_smarc_fangpio: smarcfangpiogrp {
+		fsl,pins = /* SMARC_GPIO5 */
+			   <IMX8QXP_UART1_RX_LSIO_GPIO0_IO22	0x00000021>,
+			   /* SMARC_GPIO6 */
+			   <IMX8QXP_UART1_TX_LSIO_GPIO0_IO21	0x00000021>;
+	};
+
+	pinctrl_smarc_mngtpio: smarcmngtgpiogrp {
+		fsl,pins = /* SMARC BATLOW# */
+			   <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16		0x00000021>,
+			   /* SMARC SLEEP */
+			   <IMX8QXP_SPI3_SCK_LSIO_GPIO0_IO13		0x00000021>,
+			   /* SMARC CHGPRSNT# */
+			   <IMX8QXP_SPI3_SDI_LSIO_GPIO0_IO15		0x00000021>,
+			   /* SMARC CHARGING# */
+			   <IMX8QXP_SPI3_SDO_LSIO_GPIO0_IO14		0x00000021>,
+			   /* SMARC LID */
+			   <IMX8QXP_SPDIF0_EXT_CLK_LSIO_GPIO0_IO12	0x00000021>;
+	};
+
+	pinctrl_lvds0: lbdpanel0grp {
+		fsl,pins = /* LCD PWR */
+			<IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03		0x00000021>;
+	};
+
+	pinctrl_lvds1: lbdpanel1grp {
+		fsl,pins = /* LCD PWR */
+			<IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01		0x00000021>;
+	};
+
+	pinctrl_lpi2c0: lpi2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA	0x06000021>;
+	};
+
+	pinctrl_lpi2c0_gpio: lpi2c0gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08	0x00000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07	0x00000021>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_UART0_RX		0x06000020>,
+			   <IMX8QXP_UART0_TX_ADMA_UART0_TX		0x06000020>,
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B	0x06000020>,
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B	0x06000020>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_SCU_GPIO0_00_ADMA_UART3_RX		0x06000020>,
+			   <IMX8QXP_SCU_GPIO0_01_ADMA_UART3_TX		0x06000020>;
+	};
+
+	pinctrl_i2c0_mipi_lvds0: mipi-lvds0-i2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0x06000021>;
+	};
+
+	pinctrl_i2c0_gpio_mipi_lvds0: mipi-lvds0-i2c0-gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_LSIO_GPIO1_IO25	0x0000021>,
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_LSIO_GPIO1_IO26	0x0000021>;
+	};
+
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000041>;
+	};
+
+	pinctrl_pwm_mipi_lvds0: mipi-lvds0-pwmgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_GPIO0_00_MIPI_DSI0_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_pwm_mipi_lvds1: mipi-lvds1-pwmgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_MIPI_DSI1_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00		0x00000021>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041>;
+	};
+
+	pinctrl_sdvmmc: sdvmmcgrp {
+		fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000021>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = /* PD + PDRV Low + INOUT - MEK has 0x0600004c */
+			   <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI		0x06000041>,
+			   <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO		0x06000041>,
+			   <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK		0x06000041>,
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x00000021>,
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29		0x00000021>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x06000040>,
+			   <IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC		0x06000040>,
+			   <IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS		0x06000040>,
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD		0x06000040>,
+			   <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD		0x06000040>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR	0x00000021>,
+			   <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC	0x00000021>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021>,
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x00000021>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
index 2471bb109e8e..9d44f488c083 100644
--- a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
+++ b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
@@ -10,23 +10,7 @@
 #include <dt-bindings/net/ti-dp83867.h>
 
 / {
-	sfp1: sfp1 {
-		compatible = "sff,sfp";
-		i2c-bus = <&sfp1_i2c>;
-		mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>;
-		los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>;
-	};
 
-	sfp2: sfp2 {
-		compatible = "sff,sfp";
-		i2c-bus = <&sfp2_i2c>;
-		mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>;
-		los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 &dpmac1 {
diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
index 65b4ed28a3d4..444bbf511596 100644
--- a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
+++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
@@ -47,6 +47,26 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp1_i2c>;
+		mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp2_i2c>;
+		mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
 };
 
 &duart0 {
@@ -69,6 +89,7 @@
 		reg = <0x70>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		vdd-supply = <&reg_3v3>;
 
 		i2c@0 {
 			reg = <0x0>;
diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
index 138f8778afde..7da1bfd83cca 100644
--- a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
+++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
@@ -8,6 +8,14 @@
  */
 
 / {
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
 	reg_vcc3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3V3";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
index 79a55a0fa2f1..4c6a075908d1 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
@@ -17,6 +17,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu0>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -34,6 +35,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu1>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -51,6 +53,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu2>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -68,6 +71,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu3>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -160,6 +164,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu4>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -177,6 +182,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu5>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -194,6 +200,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu6>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -211,6 +218,7 @@
 			clocks = <&crg_ctrl HI3660_PCLK>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu7>;
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index a589954c29e2..f8b56d443850 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -727,8 +727,6 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xf7106000 0x0 0x1000>;
 			interrupts = <0 50 4>;
-			bus-id = <0>;
-			enable-dma = <0>;
 			clocks = <&sys_ctrl HI6220_SPI_CLK>, <&sys_ctrl HI6220_SPI_CLK>;
 			clock-names = "sspclk", "apb_pclk";
 			pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index d39cfb723f5b..a117268267ee 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -2,6 +2,9 @@
 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
 				socfpga_agilex_socdk.dtb \
 				socfpga_agilex_socdk_nand.dtb \
+				socfpga_agilex3_socdk.dtb \
 				socfpga_agilex5_socdk.dtb \
+				socfpga_agilex5_socdk_013b.dtb \
+				socfpga_agilex5_socdk_nand.dtb \
 				socfpga_n5x_socdk.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 2a5eeb21da47..0dfbafde8822 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -101,26 +101,32 @@
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
+		interrupt-parent = <&intc>;
 		reg = <0x0 0xfffc1000 0x0 0x1000>,
 		      <0x0 0xfffc2000 0x0 0x2000>,
 		      <0x0 0xfffc4000 0x0 0x2000>,
 		      <0x0 0xfffc6000 0x0 0x2000>;
+		/* VGIC maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	clocks {
 		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
 		};
 
 		cb_intosc_ls_clk: cb-intosc-ls-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
 		};
 
 		f2s_free_clk: f2s-free-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
 		};
 
 		osc1: osc1 {
@@ -161,6 +167,7 @@
 			compatible = "intel,agilex-clkmgr";
 			reg = <0xffd10000 0x1000>;
 			#clock-cells = <1>;
+			clocks = <&osc1>;
 		};
 
 		gmac0: ethernet@ff800000 {
@@ -454,6 +461,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			dmas = <&pdma 16>, <&pdma 17>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -468,6 +477,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			dmas = <&pdma 20>, <&pdma 21>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
new file mode 100644
index 000000000000..14b299f19f3a
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025, Altera Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex3 SoCDK";
+	compatible = "intel,socfpga-agilex3-socdk", "intel,socfpga-agilex3",
+		     "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		/delete-node/ cpu@2;
+		/delete-node/ cpu@3;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "hps_led0";
+			gpios = <&porta 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&porta 12 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac2_phy0>;
+	max-frame-size = <9000>;
+
+	mdio0 {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		emac2_phy0: ethernet-phy@0 {
+			reg = <0>;
+			rxc-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txc-skew-ps = <0>;
+			txen-skew-ps = <60>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <60>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x00c00000>;
+			};
+
+			root: partition@c00000 {
+				label = "root";
+				reg = <0x00c00000 0x03400000>;
+			};
+		};
+	};
+};
+
+&smmu {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index 1162978329c1..a5c2025a616e 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -37,6 +37,7 @@
 			reg = <0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&L2>;
 		};
 
 		cpu1: cpu@1 {
@@ -44,6 +45,7 @@
 			reg = <0x100>;
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&L2>;
 		};
 
 		cpu2: cpu@2 {
@@ -51,6 +53,7 @@
 			reg = <0x200>;
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&L2>;
 		};
 
 		cpu3: cpu@3 {
@@ -58,6 +61,30 @@
 			reg = <0x300>;
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			next-level-cache = <&L3>;
+			cache-unified;
+		};
+
+		L3: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+
+	};
+
+	firmware {
+		svc {
+			compatible = "intel,agilex5-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+			iommus = <&smmu 10>;
 		};
 	};
 
@@ -75,8 +102,11 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		interrupt-controller;
+		interrupt-parent = <&intc>;
 		#redistributor-regions = <1>;
 		redistributor-stride = <0x0 0x20000>;
+		/* VGIC maintenance interrupt */
+		interrupts = <GIC_PPI 25 IRQ_TYPE_LEVEL_HIGH>;
 
 		its: msi-controller@1d040000 {
 			compatible = "arm,gic-v3-its";
@@ -133,6 +163,12 @@
 		compatible = "usb-nop-xceiv";
 	};
 
+	pmu0: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		ranges = <0 0 0 0xffffffff>;
@@ -203,7 +239,8 @@
 		};
 
 		i3c0: i3c@10da0000 {
-			compatible = "snps,dw-i3c-master-1.00a";
+			compatible = "altr,agilex5-dw-i3c-master",
+				     "snps,dw-i3c-master-1.00a";
 			reg = <0x10da0000 0x1000>;
 			#address-cells = <3>;
 			#size-cells = <0>;
@@ -213,7 +250,8 @@
 		};
 
 		i3c1: i3c@10da1000 {
-			compatible = "snps,dw-i3c-master-1.00a";
+			compatible = "altr,agilex5-dw-i3c-master",
+				     "snps,dw-i3c-master-1.00a";
 			reg = <0x10da1000 0x1000>;
 			#address-cells = <3>;
 			#size-cells = <0>;
@@ -222,6 +260,26 @@
 			status = "disabled";
 		};
 
+		gpio0: gpio@10c03200 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x10c03200 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		gpio1: gpio@10c03300 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0x10c03300 0x100>;
@@ -251,7 +309,9 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clkmgr AGILEX5_NAND_NF_CLK>;
+			clock-names = "nf_clk";
 			cdns,board-delay-ps = <4830>;
+			iommus = <&smmu 4>;
 			status = "disabled";
 		};
 
@@ -278,6 +338,7 @@
 			snps,block-size = <32767 32767 32767 32767>;
 			snps,priority = <0 1 2 3>;
 			snps,axi-max-burst-len = <8>;
+			iommus = <&smmu 8>;
 		};
 
 		dmac1: dma-controller@10dc0000 {
@@ -295,6 +356,7 @@
 			snps,block-size = <32767 32767 32767 32767>;
 			snps,priority = <0 1 2 3>;
 			snps,axi-max-burst-len = <8>;
+			iommus = <&smmu 9>;
 		};
 
 		rst: rstmgr@10d11000 {
@@ -303,6 +365,18 @@
 			#reset-cells = <1>;
 		};
 
+		smmu: iommu@16000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x16000000 0x30000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror", "priq";
+			dma-coherent;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
 		spi0: spi@10da4000 {
 			compatible = "snps,dw-apb-ssi";
 			reg = <0x10da4000 0x1000>;
@@ -314,7 +388,7 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
-			dmas = <&dmac0 2>, <&dmac0 3>;
+			dmas = <&dmac0 16>, <&dmac0 17>;
 			dma-names = "tx", "rx";
 			status = "disabled";
 
@@ -331,6 +405,8 @@
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
+			dmas = <&dmac0 20>, <&dmac0 21>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -401,6 +477,7 @@
 			phy-names = "usb2-phy";
 			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
+			iommus = <&smmu 6>;
 			clocks = <&clkmgr AGILEX5_USB2OTG_HCLK>;
 			clock-names = "otg";
 			status = "disabled";
@@ -464,5 +541,397 @@
 			clocks = <&qspi_clk>;
 			status = "disabled";
 		};
+
+		gmac0: ethernet@10810000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10810000 0x3500>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC0_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac0_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac0_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac0_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac0_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac0_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac0_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac1: ethernet@10820000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10820000 0x3500>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC1_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac1_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac1_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac1_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac1_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac1_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac1_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac2: ethernet@10830000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10830000 0x3500>;
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC2_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac2_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac2_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac2_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac2_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac2_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac2_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		pmu0_tcu: pmu@16002000 {
+			compatible = "arm,smmu-v3-pmcg";
+			reg = <0x16002000 0x1000>,
+				<0x16022000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pmu0_tbu0: pmu@16042000 {
+			compatible = "arm,smmu-v3-pmcg";
+			reg = <0x16042000 0x1000>,
+				<0x16052000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pmu0_tbu1: pmu@16062000 {
+			compatible = "arm,smmu-v3-pmcg";
+			reg = <0x16062000 0x1000>,
+				<0x16072000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pmu0_tbu2: pmu@16082000 {
+			compatible = "arm,smmu-v3-pmcg";
+			reg = <0x16082000 0x1000>,
+				<0x16092000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pmu0_tbu3: pmu@160a2000 {
+			compatible = "arm,smmu-v3-pmcg";
+			reg = <0x160A2000 0x1000>,
+				<0x160B2000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pmu0_tbu4: pmu@160c2000 {
+			compatible = "arm,smmu-v3-pmcg";
+			reg = <0x160C2000 0x1000>,
+				<0x160D2000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pmu0_tbu5: pmu@160e2000 {
+			compatible = "arm,smmu-v3-pmcg";
+			reg = <0x160E2000 0x1000>,
+				<0x160F2000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
index c533e5a3a610..262bb3e8e5c7 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
@@ -10,11 +10,51 @@
 
 	aliases {
 		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "hps_led0";
+			gpios = <&porta 11 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac2_phy0>;
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		emac2_phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
 };
 
 &gpio1 {
@@ -25,6 +65,39 @@
 	clock-frequency = <25000000>;
 };
 
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x04200000>;
+			};
+
+			root: partition@4200000 {
+				label = "root";
+				reg = <0x04200000 0x0be00000>;
+			};
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts
new file mode 100644
index 000000000000..f71e1280c778
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025, Altera Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 013B SoCDK";
+	compatible = "intel,socfpga-agilex5-socdk-013b", "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "hps_led0";
+			gpios = <&porta 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&porta 12 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac2_phy0>;
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		emac2_phy0: ethernet-phy@0 {
+			reg = <0>;
+			rxc-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txc-skew-ps = <0>;
+			txen-skew-ps = <60>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <60>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x00c00000>;
+			};
+
+			root: partition@c00000  {
+				label = "root";
+				reg = <0x00c00000 0x03400000>;
+			};
+		};
+	};
+};
+
+&smmu {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts
new file mode 100644
index 000000000000..ec4541d44c9b
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2025, Altera Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 SoCDK NAND daughter board";
+	compatible = "intel,socfpga-agilex5-socdk-nand", "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "hps_led0";
+			gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&porta 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac0_phy0>;
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		emac0_phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i3c0 {
+	status = "okay";
+};
+
+&i3c1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <8>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+		partition@200000 {
+			label = "root";
+			reg = <0x200000 0xffe00000>;
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index b31cfa6b802d..9ee312bae8d2 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -116,6 +116,8 @@
 		cdns,tsd2d-ns = <50>;
 		cdns,tchsh-ns = <4>;
 		cdns,tslch-ns = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
index 0f9020bd0c52..98900cb410dc 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
@@ -81,7 +81,7 @@
 &nand {
 	status = "okay";
 
-	flash@0 {
+	nand@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
index 7952c7f47cc2..0034a4897220 100644
--- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -93,6 +93,8 @@
 		cdns,tsd2d-ns = <50>;
 		cdns,tchsh-ns = <4>;
 		cdns,tslch-ns = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index bb0bcc6875dc..e83fdc92621e 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -5,103 +5,12 @@
  * Copyright (C) 2016, LG Electronics
  */
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
+#include "lg131x.dtsi"
 
+/ {
 	compatible = "lge,lg1312";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2", "arm,psci";
-		method = "smc";
-		cpu_suspend = <0x84000001>;
-		cpu_off = <0x84000002>;
-		cpu_on = <0x84000003>;
-	};
-
-	gic: interrupt-controller@c0001000 {
-		#interrupt-cells = <3>;
-		compatible = "arm,gic-400";
-		interrupt-controller;
-		reg = <0x0 0xc0001000 0x1000>,
-		      <0x0 0xc0002000 0x2000>,
-		      <0x0 0xc0004000 0x2000>,
-		      <0x0 0xc0006000 0x2000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>,
-				     <&cpu2>,
-				     <&cpu3>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	clk_bus: clk_bus {
-		#clock-cells = <0>;
-
-		compatible = "fixed-clock";
-		clock-frequency = <198000000>;
-		clock-output-names = "BUSCLK";
-	};
 
 	soc {
 		#address-cells = <2>;
@@ -122,233 +31,4 @@
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 	};
-
-	amba {
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		timers: timer@fd100000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x0 0xfd100000 0x1000>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-		};
-		wdog: watchdog@fd200000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x0 0xfd200000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>;
-			clock-names = "wdog_clk", "apb_pclk";
-		};
-		uart0: serial@fe000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe000000 0x1000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart1: serial@fe100000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe100000 0x1000>;
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart2: serial@fe200000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe200000 0x1000>;
-			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		spi0: spi@fe800000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe800000 0x1000>;
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>;
-			clock-names = "sspclk", "apb_pclk";
-		};
-		spi1: spi@fe900000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe900000 0x1000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>;
-			clock-names = "sspclk", "apb_pclk";
-		};
-		dmac0: dma-controller@c1128000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x0 0xc1128000 0x1000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-		gpio0: gpio@fd400000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd400000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio1: gpio@fd410000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd410000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio2: gpio@fd420000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd420000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio3: gpio@fd430000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd430000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio4: gpio@fd440000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd440000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio5: gpio@fd450000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd450000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio6: gpio@fd460000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd460000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio7: gpio@fd470000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd470000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio8: gpio@fd480000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd480000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio9: gpio@fd490000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd490000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio10: gpio@fd4a0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4a0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio11: gpio@fd4b0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4b0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio12: gpio@fd4c0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4c0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio13: gpio@fd4d0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4d0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio14: gpio@fd4e0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4e0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio15: gpio@fd4f0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4f0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio16: gpio@fd500000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd500000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio17: gpio@fd510000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd510000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index c07d670bc465..92fa5694cad1 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -5,103 +5,12 @@
  * Copyright (C) 2016, LG Electronics
  */
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
+#include "lg131x.dtsi"
 
+/ {
 	compatible = "lge,lg1313";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-		};
-		L2_0: l2-cache0 {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2", "arm,psci";
-		method = "smc";
-		cpu_suspend = <0x84000001>;
-		cpu_off = <0x84000002>;
-		cpu_on = <0x84000003>;
-	};
-
-	gic: interrupt-controller@c0001000 {
-		#interrupt-cells = <3>;
-		compatible = "arm,gic-400";
-		interrupt-controller;
-		reg = <0x0 0xc0001000 0x1000>,
-		      <0x0 0xc0002000 0x2000>,
-		      <0x0 0xc0004000 0x2000>,
-		      <0x0 0xc0006000 0x2000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>,
-				     <&cpu2>,
-				     <&cpu3>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
-			      IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	clk_bus: clk_bus {
-		#clock-cells = <0>;
-
-		compatible = "fixed-clock";
-		clock-frequency = <198000000>;
-		clock-output-names = "BUSCLK";
-	};
 
 	soc {
 		#address-cells = <2>;
@@ -122,233 +31,4 @@
 			mac-address = [ 00 00 00 00 00 00 ];
 		};
 	};
-
-	amba {
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		timers: timer@fd100000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x0 0xfd100000 0x1000>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
-			clock-names = "timer0clk", "timer1clk", "apb_pclk";
-		};
-		wdog: watchdog@fd200000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x0 0xfd200000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>;
-			clock-names = "wdog_clk", "apb_pclk";
-		};
-		uart0: serial@fe000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe000000 0x1000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart1: serial@fe100000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe100000 0x1000>;
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		uart2: serial@fe200000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x0 0xfe200000 0x1000>;
-			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		spi0: spi@fe800000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe800000 0x1000>;
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>;
-			clock-names = "sspclk", "apb_pclk";
-		};
-		spi1: spi@fe900000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x0 0xfe900000 0x1000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>, <&clk_bus>;
-			clock-names = "sspclk", "apb_pclk";
-		};
-		dmac0: dma-controller@c1128000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x0 0xc1128000 0x1000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-		};
-		gpio0: gpio@fd400000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd400000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio1: gpio@fd410000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd410000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio2: gpio@fd420000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd420000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio3: gpio@fd430000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd430000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio4: gpio@fd440000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd440000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio5: gpio@fd450000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd450000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio6: gpio@fd460000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd460000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio7: gpio@fd470000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd470000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio8: gpio@fd480000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd480000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio9: gpio@fd490000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd490000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio10: gpio@fd4a0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4a0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio11: gpio@fd4b0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4b0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-		gpio12: gpio@fd4c0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4c0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio13: gpio@fd4d0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4d0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio14: gpio@fd4e0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4e0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio15: gpio@fd4f0000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd4f0000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio16: gpio@fd500000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd500000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-		gpio17: gpio@fd510000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0x0 0xfd510000 0x1000>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/lg/lg131x.dtsi b/arch/arm64/boot/dts/lg/lg131x.dtsi
new file mode 100644
index 000000000000..4cb1e4510897
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg131x.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg131x SoCs
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	gic: interrupt-controller@c0001000 {
+		#interrupt-cells = <3>;
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		reg = <0x0 0xc0001000 0x1000>,
+		      <0x0 0xc0002000 0x2000>,
+		      <0x0 0xc0004000 0x2000>,
+		      <0x0 0xc0006000 0x2000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_bus: clk_bus {
+		#clock-cells = <0>;
+
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "BUSCLK";
+	};
+
+	amba {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timers: timer@fd100000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfd100000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		};
+		wdog: watchdog@fd200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xfd200000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+		uart0: serial@fe000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe000000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+		uart1: serial@fe100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe100000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+		uart2: serial@fe200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe200000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+		spi0: spi@fe800000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe800000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+		spi1: spi@fe900000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe900000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+		dmac0: dma-controller@c1128000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xc1128000 0x1000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+		gpio0: gpio@fd400000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd400000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio1: gpio@fd410000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd410000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio2: gpio@fd420000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd420000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio3: gpio@fd430000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd430000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio4: gpio@fd440000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd440000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio5: gpio@fd450000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd450000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio6: gpio@fd460000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd460000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio7: gpio@fd470000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd470000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio8: gpio@fd480000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd480000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio9: gpio@fd490000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd490000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio10: gpio@fd4a0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4a0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio11: gpio@fd4b0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4b0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio12: gpio@fd4c0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4c0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio13: gpio@fd4d0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4d0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio14: gpio@fd4e0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4e0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio15: gpio@fd4f0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4f0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio16: gpio@fd500000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd500000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio17: gpio@fd510000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd510000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index ce751b5028e2..a774bc74a0a0 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 # Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-atlas-v5.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
@@ -32,3 +33,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9132-clearfog.dtb
+
+subdir-y	+= mmp
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 75377c292bcb..4878773883c9 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -78,7 +78,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		internal-regs@7f000000 {
+		bus@7f000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -322,7 +322,7 @@
 
 		nand: nand-controller@805b0000 {
 			compatible = "marvell,ac5-nand-controller";
-			reg =  <0x0 0x805b0000 0x0 0x00000054>;
+			reg = <0x0 0x805b0000 0x0 0x00000054>;
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
deleted file mode 100644
index dc1182ec9fa1..000000000000
--- a/arch/arm64/boot/dts/marvell/armada-371x.dtsi
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 371x family of SoCs
- * (also named 88F3710)
- *
- * Copyright (C) 2016 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- */
-
-#include "armada-37xx.dtsi"
-
-/ {
-	model = "Marvell Armada 3710 SoC";
-	compatible = "marvell,armada3710", "marvell,armada3700";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
new file mode 100644
index 000000000000..070d10a705bb
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for RIPE Atlas Probe v5
+ * 2025 by Marek Behún <kabel@kernel.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/bus/moxtet.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "RIPE Atlas Probe v5";
+	compatible = "ripe,atlas-v5", "marvell,armada3720",
+		     "marvell,armada3710";
+
+	aliases {
+		ethernet0 = &eth0;
+		mmc0 = &sdhci0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_RED>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vsdc_reg: vsdc-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	non-removable;
+	bus-width = <4>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	sd-uhs-sdr104;
+	marvell,xenon-emmc;
+	marvell,xenon-tun-count = <9>;
+	marvell,pad-type = "fixed-1-8v";
+	vqmmc-supply = <&vsdc_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 0cfb38492021..bd4e61d5448e 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -18,7 +18,7 @@
 
 / {
 	model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
-	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3700";
+	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
index 6715a19c1483..5c4d8f379704 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
@@ -18,7 +18,7 @@
 / {
 	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
 	compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
-		     "marvell,armada3720", "marvell,armada3700";
+		     "marvell,armada3720", "marvell,armada3710";
 };
 
 &sdhci0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
index b3cc2b7b5d19..97a180c8dcd9 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -13,7 +13,7 @@
 / {
 	model = "Globalscale Marvell ESPRESSOBin Ultra Board";
 	compatible = "globalscale,espressobin-ultra", "globalscale,espressobin",
-		     "marvell,armada3720", "marvell,armada3700";
+		     "marvell,armada3720", "marvell,armada3710";
 
 	aliases {
 		/* ethernet1 is WAN port */
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
index 2a8aa3901a9f..75401eab4d42 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
@@ -19,7 +19,7 @@
 	model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
 	compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
 		     "globalscale,espressobin", "marvell,armada3720",
-		     "marvell,armada3700";
+		     "marvell,armada3710";
 
 	aliases {
 		/* ethernet1 is wan port */
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
index b03af87611a9..48a7f50fb427 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
@@ -18,7 +18,7 @@
 / {
 	model = "Globalscale Marvell ESPRESSOBin Board V7";
 	compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
-		     "marvell,armada3720", "marvell,armada3700";
+		     "marvell,armada3720", "marvell,armada3710";
 
 	aliases {
 		/* ethernet1 is wan port */
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index c5a834b33b77..1542d836c090 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -16,5 +16,5 @@
 
 / {
 	model = "Globalscale Marvell ESPRESSOBin Board";
-	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3700";
+	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index 56930f2ce481..9f4bafeddd82 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "GL.iNet GL-MV1000";
-	compatible = "glinet,gl-mv1000", "marvell,armada3720";
+	compatible = "glinet,gl-mv1000", "marvell,armada3720", "marvell,armada3710";
 
 	aliases {
 		led-boot = &led_power;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 54453b0a91f9..f4d73c8b1a6d 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -14,7 +14,7 @@
 / {
 	model = "CZ.NIC Turris Mox Board";
 	compatible = "cznic,turris-mox", "marvell,armada3720",
-		     "marvell,armada3700";
+		     "marvell,armada3710";
 
 	aliases {
 		spi0 = &spi0;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
index 3a9b6907185d..242820845707 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
@@ -26,6 +26,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_quad_pins>;
 
 		led-power1 {
 			label = "udpu:green:power";
@@ -82,8 +84,6 @@
 
 &spi0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_quad_pins>;
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -108,6 +108,10 @@
 	};
 };
 
+&spi_quad_pins {
+	function = "gpio";
+};
+
 &pinctrl_nb {
 	i2c2_recovery_pins: i2c2-recovery-pins {
 		groups = "i2c2";
diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
index 02ae1e153288..b99ac4c03a48 100644
--- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -12,9 +12,6 @@
 #include "armada-37xx.dtsi"
 
 / {
-	model = "Marvell Armada 3720 SoC";
-	compatible = "marvell,armada3720", "marvell,armada3700";
-
 	cpus {
 		cpu1: cpu@1 {
 			device_type = "cpu";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 9603223dd761..c612317043ea 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -11,8 +11,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
-	model = "Marvell Armada 37xx SoC";
-	compatible = "marvell,armada3700";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
@@ -78,7 +76,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		internal-regs@d0000000 {
+		bus@d0000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -526,6 +524,7 @@
 			pcie_intc: interrupt-controller {
 				interrupt-controller;
 				#interrupt-cells = <1>;
+				#address-cells = <0>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
index 4e46326dd123..570f901b4f4a 100644
--- a/arch/arm64/boot/dts/marvell/armada-7020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
@@ -8,9 +8,3 @@
 
 #include "armada-ap806-dual.dtsi"
 #include "armada-70x0.dtsi"
-
-/ {
-	model = "Marvell Armada 7020";
-	compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
-		     "marvell,armada-ap806";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 1e0ab35cc686..3add6506ff20 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -124,7 +124,6 @@
 
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;
@@ -214,6 +213,7 @@
 
 	sata-port@1 {
 		phys = <&cp0_comphy3 1>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 7af949092b91..6bdc4f1e6939 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -433,11 +433,13 @@
 	/* 7 + 12 SATA connector (J24) */
 	sata-port@0 {
 		phys = <&cp0_comphy2 0>;
+		status = "okay";
 	};
 
 	/* M.2-2250 B-key (J39) */
 	sata-port@1 {
 		phys = <&cp0_comphy3 1>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
index 2f440711d21d..710ac44870bd 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -9,12 +9,6 @@
 #include "armada-ap806-quad.dtsi"
 #include "armada-70x0.dtsi"
 
-/ {
-	model = "Marvell Armada 7040";
-	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
-		     "marvell,armada-ap806";
-};
-
 &cp0_pcie0 {
 	iommu-map =
 		<0x0   &smmu 0x480 0x20>,
diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
index 293403a1a333..df939426d258 100644
--- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -56,7 +56,7 @@
 			marvell,function = "dev";
 		};
 
-		nand_rb: nand-rb {
+		nand_rb: nand-rb-pins {
 			marvell,pins = "mpp13";
 			marvell,function = "nf";
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index ba1307c0fadb..b6fc18876093 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -9,12 +9,6 @@
 #include "armada-ap806-dual.dtsi"
 #include "armada-80x0.dtsi"
 
-/ {
-	model = "Marvell Armada 8020";
-	compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
-		     "marvell,armada-ap806";
-};
-
 /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
  * in CP master is not connected (by package) to the oscillator. So
  * disable it. However, the RTC clock in CP slave is connected to the
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 7005a32a6e1e..90ae93274a16 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -371,25 +371,25 @@
 };
 
 &cp0_gpio2 {
-	sata_reset {
+	sata-reset-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	lte_reset {
+	lte-reset-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_LOW>;
 		output-low;
 	};
 
-	wlan_disable {
+	wlan_disable-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_LOW>;
 		output-low;
 	};
 
-	lte_disable {
+	lte-disable-hog {
 		gpio-hog;
 		gpios = <21 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -475,6 +475,7 @@
 
 	sata-port@1 {
 		phys = <&cp1_comphy0 1>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 2ec19d364e62..21ecb9c12505 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -122,7 +122,6 @@
 	/* U31 */
 	expander0: pca9555@21 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x21>;
@@ -131,7 +130,6 @@
 	/* U25 */
 	expander1: pca9555@25 {
 		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x25>;
@@ -145,9 +143,12 @@
 
 	sata-port@0 {
 		phys = <&cp0_comphy1 0>;
+		status = "okay";
 	};
+
 	sata-port@1 {
 		phys = <&cp0_comphy3 1>;
+		status = "okay";
 	};
 };
 
@@ -304,11 +305,9 @@
 
 	sata-port@0 {
 		phys = <&cp1_comphy1 0>;
-		phy-names = "cp1-sata0-0-phy";
 	};
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
-		phy-names = "cp1-sata0-1-phy";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index e88ff5b179c8..f2d278d171eb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -245,6 +245,7 @@
 	/* CPM Lane 5 - U29 */
 	sata-port@1 {
 		phys = <&cp0_comphy5 1>;
+		status = "okay";
 	};
 };
 
@@ -344,13 +345,13 @@
 	/* CPS Lane 1 - U32 */
 	sata-port@0 {
 		phys = <&cp1_comphy1 0>;
-		phy-names = "cp1-sata0-0-phy";
+		status = "okay";
 	};
 
 	/* CPS Lane 3 - U31 */
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
-		phy-names = "cp1-sata0-1-phy";
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index 3e5e0651ce68..def25d51c4bf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "IEI-Puzzle-M801";
-	compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806";
+	compatible = "iei,puzzle-m801", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806";
 
 	aliases {
 		ethernet0 = &cp0_eth0;
@@ -408,10 +408,12 @@
 
 	sata-port@0 {
 		phys = <&cp0_comphy2 0>;
+		status = "okay";
 	};
 
 	sata-port@1 {
 		phys = <&cp0_comphy5 1>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 22c2d6ebf381..3efd9b9e6892 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -9,12 +9,6 @@
 #include "armada-ap806-quad.dtsi"
 #include "armada-80x0.dtsi"
 
-/ {
-	model = "Marvell Armada 8040";
-	compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
-		     "marvell,armada-ap806";
-};
-
 &cp0_pcie0 {
 	iommu-map =
 		<0x0   &smmu 0x480 0x20>,
diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
index 299e814d1ded..32bb56f2fe3f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8080.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
@@ -6,9 +6,3 @@
  */
 
 #include "armada-ap810-ap0-octa-core.dtsi"
-
-/ {
-	model = "Marvell 8080 board";
-	compatible = "marvell,armada-8080", "marvell,armada-ap810-octa",
-				"marvell,armada-ap810";
-};
diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
index ee67c70bf02e..fb361d657a77 100644
--- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -89,7 +89,7 @@
 			marvell,function = "dev";
 		};
 
-		nand_rb: nand-rb {
+		nand_rb: nand-rb-pins {
 			marvell,pins = "mpp13", "mpp12";
 			marvell,function = "nf";
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index 3ed6fba1f438..82f4dedfc25e 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -8,9 +8,6 @@
 #include "armada-ap806.dtsi"
 
 / {
-	model = "Marvell Armada AP806 Dual";
-	compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index cf6a96ddcf40..f37f49c79a50 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -8,9 +8,6 @@
 #include "armada-ap806.dtsi"
 
 / {
-	model = "Marvell Armada AP806 Quad";
-	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 866628679ac7..73a570cf1010 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -5,14 +5,8 @@
  * Device Tree file for Marvell Armada AP806.
  */
 
-#define AP_NAME		ap806
 #include "armada-ap80x.dtsi"
 
-/ {
-	model = "Marvell Armada AP806";
-	compatible = "marvell,armada-ap806";
-};
-
 &ap_syscon0 {
 	ap_clk: clock {
 		compatible = "marvell,ap806-clock";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
index 8848238f9565..e8af7546e893 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -8,9 +8,6 @@
 #include "armada-ap807.dtsi"
 
 / {
-	model = "Marvell Armada AP807 Quad";
-	compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
index a3328d05fc94..196793d8715c 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
@@ -5,14 +5,8 @@
  * Copyright (C) 2019 Marvell Technology Group Ltd.
  */
 
-#define AP_NAME		ap807
 #include "armada-ap80x.dtsi"
 
-/ {
-	model = "Marvell Armada AP807";
-	compatible = "marvell,armada-ap807";
-};
-
 &ap_syscon0 {
 	ap_clk: clock {
 		compatible = "marvell,ap807-clock";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index fdf88cd0eb02..40e146982921 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -48,14 +48,29 @@
 		};
 	};
 
-	AP_NAME {
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupt-parent = <&pic>;
+		interrupts = <17>;
+	};
+
+	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges;
 
-		config-space@f0000000 {
+		bus@f0000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -122,20 +137,6 @@
 				};
 			};
 
-			timer {
-				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-			};
-
-			pmu {
-				compatible = "arm,cortex-a72-pmu";
-				interrupt-parent = <&pic>;
-				interrupts = <17>;
-			};
-
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
 				msi-controller;
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
index d1a7143ef3d4..2e719ffc8289 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -11,7 +11,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "marvell,armada-ap810-octa";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
index 2f9ab6b4a2c9..abb37e5fc2c0 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
@@ -10,10 +10,9 @@
 /dts-v1/;
 
 / {
-	model = "Marvell Armada AP810";
-	compatible = "marvell,armada-ap810";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	aliases {
 		serial0 = &uart0_ap0;
@@ -25,14 +24,21 @@
 		method = "smc";
 	};
 
-	ap810-ap0 {
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		ranges;
 
-		config-space@e8000000 {
+		bus@e8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -62,14 +68,6 @@
 				};
 			};
 
-			timer {
-				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-					     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-					     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-					     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-			};
-
 			xor@400000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x400000 0x1000>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 4fd33b0fa56e..e3cfd168becc 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -5,8 +5,4 @@
  * Device Tree file for Marvell Armada CP110.
  */
 
-#define CP11X_TYPE cp110
-
 #include "armada-cp11x.dtsi"
-
-#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
index 1d0a9653e681..ec6432c8db7c 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
@@ -5,8 +5,4 @@
  * Device Tree file for Marvell Armada CP115.
  */
 
-#define CP11X_TYPE cp115
-
 #include "armada-cp11x.dtsi"
-
-#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 7e595ac80043..d9d409eac259 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -17,7 +17,7 @@
 	 * The contents of the node are defined below, in order to
 	 * save one indentation level
 	 */
-	CP11X_NAME: CP11X_NAME { };
+	CP11X_NAME: CP11X_NODE_NAME(bus) { };
 
 	/*
 	 * CPs only have one sensor in the thermal IC.
@@ -51,7 +51,7 @@
 	interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
 	ranges;
 
-	config-space@CP11X_BASE {
+	bus@CP11X_BASE {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -202,6 +202,7 @@
 			CP11X_LABEL(icu_nsr): interrupt-controller@10 {
 				compatible = "marvell,cp110-icu-nsr";
 				reg = <0x10 0x20>;
+				#address-cells = <0>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				msi-parent = <&gicp>;
@@ -347,10 +348,12 @@
 
 			sata-port@0 {
 				reg = <0>;
+				status = "disabled";
 			};
 
 			sata-port@1 {
 				reg = <1>;
+				status = "disabled";
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
index ad0ab34b6602..bd42bfbe408b 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
@@ -152,11 +152,12 @@
 
 /* SRDS #0 - SATA on M.2 connector */
 &cp0_sata0 {
-	phys = <&cp0_comphy0 1>;
 	status = "okay";
 
-	/* only port 1 is available */
-	/delete-node/ sata-port@0;
+	sata-port@1 {
+		phys = <&cp0_comphy0 1>;
+		status = "okay";
+	};
 };
 
 /* microSD */
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
index 0904cb0309ae..34194745f79e 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
@@ -28,6 +28,7 @@
 		status = "okay";
 		/* Generic PHY, providing serdes lanes */
 		phys = <&cp0_comphy2 0>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index be56a2336265..3cc320f569ad 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -209,7 +209,6 @@
 			/* U12 */
 			cp0_module_expander1: pca9555@21 {
 				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
 				gpio-controller;
 				#gpio-cells = <2>;
 				reg = <0x21>;
@@ -380,7 +379,7 @@
 				       "mpp27";
 			marvell,function = "dev";
 		};
-		nand_rb: nand-rb {
+		nand_rb: nand-rb-pins {
 			marvell,pins = "mpp13";
 			marvell,function = "nf";
 		};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
index cb8d54895a77..f95202decfce 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
@@ -7,9 +7,6 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "SolidRun CN9130 SoM";
-	compatible = "solidrun,cn9130-sr-som", "marvell,cn9130";
-
 	aliases {
 		ethernet0 = &cp0_eth0;
 		ethernet1 = &cp0_eth1;
@@ -64,6 +61,8 @@
 	pinctrl-0 = <&ap_mmc0_pins>;
 	pinctrl-names = "default";
 	vqmmc-supply = <&v_1_8>;
+	no-sdio;
+	non-removable;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
index b1ea7dcaed17..338853d3b179 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
+++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
@@ -435,7 +435,7 @@
 	managed = "in-band-status";
 	phy-mode = "sgmii";
 	phy = <&cp1_phy0>;
-	phys = <&cp0_comphy3 1>;
+	phys = <&cp1_comphy3 1>;
 	status = "okay";
 };
 
@@ -444,7 +444,7 @@
 	managed = "in-band-status";
 	phy-mode = "sgmii";
 	phy = <&cp1_phy1>;
-	phys = <&cp0_comphy5 2>;
+	phys = <&cp1_comphy5 2>;
 	status = "okay";
 };
 
@@ -563,11 +563,13 @@
 
 /* SRDS #1 - SATA on M.2 (J44) */
 &cp1_sata0 {
-	phys = <&cp1_comphy1 0>;
 	status = "okay";
 
 	/* only port 0 is available */
-	/delete-node/ sata-port@1;
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		status = "okay";
+	};
 };
 
 &cp1_syscon0 {
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
index ad7360c83048..626042fce7e2 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -127,6 +127,7 @@
 	sata-port@1 {
 		/* Generic PHY, providing serdes lanes */
 		phys = <&cp1_comphy5 1>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
index 0f53745a6fa0..2507896d58f9 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
+++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
@@ -512,10 +512,9 @@
 	status = "okay";
 
 	/* only port 1 is available */
-	/delete-node/ sata-port@0;
-
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
+		status = "okay";
 	};
 };
 
@@ -559,7 +558,7 @@
 };
 
 &cp2_ethernet {
-	status =  "okay";
+	status = "okay";
 };
 
 /* SRDS #2 - 5GE */
@@ -572,7 +571,7 @@
 };
 
 &cp2_gpio1 {
-	pinctrl-names= "default";
+	pinctrl-names = "default";
 	pinctrl-0 = <&cp2_rsvd9_pins>;
 
 	/* J21 */
@@ -631,9 +630,8 @@
 	status = "okay";
 
 	/* only port 1 is available */
-	/delete-node/ sata-port@0;
-
 	sata-port@1 {
+		status = "okay";
 		phys = <&cp2_comphy3 1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
index e753cfdac697..f91fc69905b8 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
@@ -175,6 +175,7 @@
 	sata-port@0 {
 		/* Generic PHY, providing serdes lanes */
 		phys = <&cp2_comphy2 0>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
index afc041c1c448..91ba5f7dc9b4 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
@@ -137,6 +137,14 @@
 	pinctrl-0 = <&ap_mmc0_pins>;
 	pinctrl-names = "default";
 	vqmmc-supply = <&v_1_8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so disable
+	 * UHS (by preventing voltage switch), SDR104, SDR50 and DDR50 modes.
+	 */
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
 	status = "okay";
 };
 
@@ -442,7 +450,7 @@
 		reg = <0>;
 		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		spi-max-frequency = <10000000>;
-		pinctrl-names  = "default";
+		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_tpm_irq_pins>;
 		interrupt-parent = <&cp1_gpio1>;
 		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/marvell/mmp/Makefile b/arch/arm64/boot/dts/marvell/mmp/Makefile
new file mode 100644
index 000000000000..103175ed63b0
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb
diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
new file mode 100644
index 000000000000..b2ce5edd9c6a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "pxa1908.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy Core Prime VE LTE";
+	compatible = "samsung,coreprimevelte", "marvell,pxa1908";
+
+	aliases {
+		mmc0 = &sdh2; /* eMMC */
+		mmc1 = &sdh0; /* SD card */
+		mmc2 = &sdh1; /* SDIO */
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		fb0: framebuffer@17177000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x17177000 0 (480 * 800 * 4)>;
+			power-domains = <&apmu PXA1908_POWER_DOMAIN_DSI>;
+			width = <480>;
+			height = <800>;
+			stride = <(480 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0 0x40000000>;
+	};
+
+	reserved-memory {
+		/*
+		 * Reserved by the vendor bootloader as a "secure region".
+		 *
+		 * TODO: See if the responsible stage of the bootloader can be
+		 * replaced
+		 */
+		secure-region@0 {
+			reg = <0 0 0 0x1000000>;
+		};
+
+		framebuffer@17000000 {
+			reg = <0 0x17000000 0 0x1800000>;
+			no-map;
+		};
+	};
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <3>;
+		i2c-gpio,timeout-ms = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_muic_pins>;
+
+		muic: extcon@14 {
+			compatible = "siliconmitus,sm5504-muic";
+			reg = <0x14>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+			usb_con: connector {
+				compatible = "usb-b-connector";
+				label = "micro-USB";
+				type = "micro";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		key-voldown {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	backlight {
+		compatible = "kinetic,ktd2801";
+		ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		max-brightness = <210>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwm-names = "enable";
+		pwms = <&pwm3 100000>;
+		enable-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_pin>;
+	};
+};
+
+&smmu {
+	status = "okay";
+};
+
+&pmx {
+	pinctrl-single,gpio-range = <&range 55 55 0>,
+				    <&range 110 32 0>,
+				    <&range 52 1 0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&board_pins_0 &board_pins_1 &board_pins_2>;
+
+	board_pins_0: board-pins-0 {
+		pinctrl-single,pins = <
+			0x160 0
+			0x164 0
+			0x168 0
+			0x16c 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_1: board-pins-1 {
+		pinctrl-single,pins = <
+			0x44 1
+			0x48 1
+			0x20 1
+			0x18 1
+			0x14 1
+			0x10 1
+			0xc 1
+			0x8 1
+			0x68 1
+			0x58 0
+			0x54 0
+			0x7c 0
+			0x6c 0
+			0x70 0
+			0x4c 1
+			0x50 1
+			0xac 0
+			0x90 0
+			0x8c 0
+			0x88 0
+			0x84 0
+			0xc8 0
+			0x128 0
+			0x190 0
+			0x194 0
+			0x1a0 0
+			0x114 0
+			0x118 0
+			0x1d8 0
+			0x1e4 0
+			0xe8 0
+			0x100 0
+			0x204 0
+			0x210 0
+			0x218 0
+		>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_2: board-pins-2 {
+		pinctrl-single,pins = <
+			0x260 0
+			0x264 0
+			0x268 0
+			0x26c 0
+			0x270 0
+			0x274 0
+			0x78 0
+			0x74 0
+			0xb0 1
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	uart0_pins: uart0-pins {
+		pinctrl-single,pins = <
+			0x198 6
+			0x19c 6
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pinctrl-single,pins = <
+			0x11c 0
+			0x120 0
+			0x1a4 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	i2c_muic_pins: i2c-muic-pins {
+		pinctrl-single,pins = <
+			0x154 0
+			0x150 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	sdh0_pins_0: sdh0-pins-0 {
+		pinctrl-single,pins = <
+			0x108 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_1: sdh0-pins-1 {
+		pinctrl-single,pins = <
+			0x94 0
+			0x98 0
+			0x9c 0
+			0xa0 0
+			0xa4 0
+		>;
+		pinctrl-single,drive-strength = <0x800 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_2: sdh0-pins-2 {
+		pinctrl-single,pins = <
+			0xa8 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+
+	sdh1_pins_0: sdh1-pins-0 {
+		pinctrl-single,pins = <
+			0x170 1
+			0x174 1
+			0x178 1
+			0x17c 1
+			0x180 1
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh1_pins_1: sdh1-pins-1 {
+		pinctrl-single,pins = <0x184 1>;
+		pinctrl-single,drive-strength = <0 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+
+	sdh1_pins_2: sdh1-pins-2 {
+		pinctrl-single,pins = <0xec 0>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh1_fast_pins_0: sdh1-fast-pins-0 {
+		pinctrl-single,pins = <
+			0x170 1
+			0x174 1
+			0x178 1
+			0x17c 1
+			0x180 1
+		>;
+		pinctrl-single,drive-strength = <0x1800 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh1_fast_pins_1: sdh1-fast-pins-1 {
+		pinctrl-single,pins = <0x184 1>;
+		pinctrl-single,drive-strength = <0x1800 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+
+	sdh2_pins_0: sdh2-pins-0 {
+		pinctrl-single,pins = <
+			0x24 1
+			0x28 1
+			0x2c 1
+			0x30 1
+			0x34 1
+			0x38 1
+			0x3c 1
+			0x40 1
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh2_pins_1: sdh2-pins-1 {
+		pinctrl-single,pins = <0x64 1>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+
+	sdh2_pins_2: sdh2-pins-2 {
+		pinctrl-single,pins = <0x5c 1>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	sdh2_fast_pins_0: sdh2-fast-pins-0 {
+		pinctrl-single,pins = <
+			0x24 1
+			0x28 1
+			0x2c 1
+			0x30 1
+			0x34 1
+			0x38 1
+			0x3c 1
+			0x40 1
+		>;
+		pinctrl-single,drive-strength = <0x1800 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh2_fast_pins_1: sdh2-fast-pins-1 {
+		pinctrl-single,pins = <0x64 1>;
+		pinctrl-single,drive-strength = <0x1800 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+
+	sdh2_fast_pins_2: sdh2-fast-pins-2 {
+		pinctrl-single,pins = <0x5c 1>;
+		pinctrl-single,drive-strength = <0x1800 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	vibrator_pin: vibrator-pin {
+		pinctrl-single,pins = <0x12c 0>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0x8000 0xc000 0x8000 0xc000>;
+		pinctrl-single,bias-pulldown = <0xa000 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&twsi0 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+};
+
+&twsi2 {
+	status = "okay";
+
+	pmic@30 {
+		compatible = "marvell,88pm886-a1";
+		reg = <0x30>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		wakeup-source;
+
+		regulators {
+			ldo2: ldo2 {
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <3100000>;
+			};
+
+			ldo6: ldo6 {
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo14: ldo14 {
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&twsi3 {
+	status = "okay";
+
+	touchscreen@50 {
+		compatible = "imagis,ist3032c";
+		reg = <0x50>;
+		interrupt-parent = <&gpio>;
+		interrupts = <72 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&ldo2>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+	};
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+};
+
+&sdh2 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sdh2_pins_0 &sdh2_pins_1 &sdh2_pins_2>;
+	pinctrl-1 = <&sdh2_fast_pins_0 &sdh2_fast_pins_1 &sdh2_fast_pins_2>;
+	bus-width = <8>;
+	non-removable;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+};
+
+&sdh0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdh0_pins_0 &sdh0_pins_1 &sdh0_pins_2>;
+	cd-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	wp-inverted;
+	vmmc-supply = <&ldo14>;
+	vqmmc-supply = <&ldo6>;
+};
+
+&sdh1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sdh1_pins_0 &sdh1_pins_1 &sdh1_pins_2>;
+	pinctrl-1 = <&sdh1_fast_pins_0 &sdh1_fast_pins_1 &sdh1_pins_2>;
+	bus-width = <4>;
+	non-removable;
+};
+
+&pwm3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
new file mode 100644
index 000000000000..5778bfdb8567
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/marvell,pxa1908.h>
+#include <dt-bindings/power/marvell,pxa1908-power.h>
+
+/ {
+	model = "Marvell Armada PXA1908";
+	compatible = "marvell,pxa1908";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 3>;
+			enable-method = "psci";
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@8100000 {
+			compatible = "ramoops";
+			reg = <0 0x8100000 0 0x40000>;
+			record-size = <0x8000>;
+			console-size = <0x20000>;
+			max-reason = <5>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smmu: iommu@c0010000 {
+			compatible = "arm,mmu-400";
+			reg = <0 0xc0010000 0 0x10000>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&apmu PXA1908_POWER_DOMAIN_VPU>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@d1df9000 {
+			compatible = "arm,gic-400";
+			reg = <0 0xd1df9000 0 0x1000>,
+				<0 0xd1dfa000 0 0x2000>,
+				/* The subsequent registers are guesses. */
+				<0 0xd1dfc000 0 0x2000>,
+				<0 0xd1dfe000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apb@d4000000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4000000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4000000 0x200000>;
+
+			pdma: dma-controller@0 {
+				compatible = "marvell,pdma-1.0";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <30>;
+				#dma-cells = <2>;
+			};
+
+			twsi1: i2c@10800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10800 0x64>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI1>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi0: i2c@11000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x11000 0x64>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi3: i2c@13800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x13800 0x64>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI3>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbc: clock-controller@15000 {
+				compatible = "marvell,pxa1908-apbc";
+				reg = <0x15000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			uart0: serial@17000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x17000 0x1000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART0>;
+				reg-shift = <2>;
+			};
+
+			uart1: serial@18000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x18000 0x1000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART1>;
+				reg-shift = <2>;
+			};
+
+			gpio: gpio@19000 {
+				compatible = "marvell,mmp-gpio";
+				reg = <0x19000 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&apbc PXA1908_CLK_GPIO>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges = <0 0x19000 0x800>;
+
+				gpio@0 {
+					reg = <0x0 0x4>;
+				};
+
+				gpio@4 {
+					reg = <0x4 0x4>;
+				};
+
+				gpio@8 {
+					reg = <0x8 0x4>;
+				};
+
+				gpio@100 {
+					reg = <0x100 0x4>;
+				};
+			};
+
+			pwm0: pwm@1a000 {
+				compatible = "marvell,pxa250-pwm";
+				reg = <0x1a000 0x10>;
+				clocks = <&apbc PXA1908_CLK_PWM0>;
+				#pwm-cells = <1>;
+				status = "disabled";
+			};
+
+			pwm1: pwm@1a400 {
+				compatible = "marvell,pxa250-pwm";
+				reg = <0x1a400 0x10>;
+				clocks = <&apbc PXA1908_CLK_PWM1>;
+				#pwm-cells = <1>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@1a800 {
+				compatible = "marvell,pxa250-pwm";
+				reg = <0x1a800 0x10>;
+				clocks = <&apbc PXA1908_CLK_PWM2>;
+				#pwm-cells = <1>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@1ac00 {
+				compatible = "marvell,pxa250-pwm";
+				reg = <0x1ac00 0x10>;
+				clocks = <&apbc PXA1908_CLK_PWM3>;
+				#pwm-cells = <1>;
+				status = "disabled";
+			};
+
+			pmx: pinmux@1e000 {
+				compatible = "marvell,pxa1908-padconf", "pinconf-single";
+				reg = <0x1e000 0x330>;
+
+				#pinctrl-cells = <1>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <7>;
+
+				range: gpio-range {
+					#pinctrl-single,gpio-range-cells = <3>;
+				};
+			};
+
+			uart2: serial@36000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x36000 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_UART2>;
+				reg-shift = <2>;
+			};
+
+			twsi2: i2c@37000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x37000 0x64>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_TWSI2>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbcp: clock-controller@3b000 {
+				compatible = "marvell,pxa1908-apbcp";
+				reg = <0x3b000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			mpmu: clock-controller@50000 {
+				compatible = "marvell,pxa1908-mpmu";
+				reg = <0x50000 0x1000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		axi@d4200000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4200000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4200000 0x200000>;
+
+			usbphy: phy@7000 {
+				compatible = "marvell,pxa1928-usb-phy";
+				reg = <0x7000 0x200>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				#phy-cells = <0>;
+			};
+
+			usb: usb@8000 {
+				compatible = "chipidea,usb2";
+				reg = <0x8000 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				phys = <&usbphy>;
+				phy-names = "usb-phy";
+			};
+
+			sdh0: mmc@80000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH0>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh1: mmc@80800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80800 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH1>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh2: mmc@81000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x81000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH2>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			apmu: clock-controller@82800 {
+				compatible = "marvell,pxa1908-apmu", "syscon";
+				reg = <0x82800 0x400>;
+				#clock-cells = <1>;
+				#power-domain-cells = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 8fd7b2bb7a15..c5fd6191a925 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -17,10 +17,20 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-mini.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sata.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-2g5.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-emmc.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-4e.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-cn15.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-cn18.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-emmc.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-sd.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-sd.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
@@ -55,24 +65,37 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-chinchou-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-chinchou-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-chinchou-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393216.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393217.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393218.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-rusty-sku196608.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-squirtle.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb-sku589824.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb-sku589825.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku2.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku3.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku4.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku5.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku6.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku7.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r4.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-dojo-r1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r1.dtb
@@ -81,12 +104,22 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-genio-510-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-grinn-genio-510-sbc.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk-ufs.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-grinn-genio-700-sbc.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l-8-hd-panel.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
 
 # Device tree overlays support
 DTC_FLAGS_mt7986a-bananapi-bpi-r3 := -@
 DTC_FLAGS_mt7986a-bananapi-bpi-r3-mini := -@
+DTC_FLAGS_mt7988a-bananapi-bpi-r4 := -@
+DTC_FLAGS_mt7988a-bananapi-bpi-r4-2g5 := -@
+DTC_FLAGS_mt7988a-bananapi-bpi-r4-pro-4e := -@
+DTC_FLAGS_mt7988a-bananapi-bpi-r4-pro-8x := -@
+DTC_FLAGS_mt8395-radxa-nio-12l := -@
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index c84c47c1352f..0449686bd06b 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -115,6 +115,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth_default>;
 	pinctrl-1 = <&eth_sleep>;
+	mediatek,mac-wol;
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm64/boot/dts/mediatek/mt6331.dtsi b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
index d89858c73ab1..243afbffa21f 100644
--- a/arch/arm64/boot/dts/mediatek/mt6331.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
@@ -6,12 +6,12 @@
 #include <dt-bindings/input/input.h>
 
 &pwrap {
-	pmic: mt6331 {
+	pmic: pmic {
 		compatible = "mediatek,mt6331";
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		mt6331regulator: mt6331regulator {
+		mt6331regulator: regulators {
 			compatible = "mediatek,mt6331-regulator";
 
 			mt6331_vdvfs11_reg: buck-vdvfs11 {
@@ -258,7 +258,7 @@
 			};
 
 			mt6331_vdig18_reg: ldo-vdig18 {
-				regulator-name = "dvdd18_dig";
+				regulator-name = "vdig18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <0>;
@@ -266,11 +266,11 @@
 			};
 		};
 
-		mt6331rtc: mt6331rtc {
+		mt6331rtc: rtc {
 			compatible = "mediatek,mt6331-rtc";
 		};
 
-		mt6331keys: mt6331keys {
+		mt6331keys: keys {
 			compatible = "mediatek,mt6331-keys";
 			power {
 				linux,keycodes = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6357.dtsi b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
index 5fafa842d312..dca4e5c3d8e2 100644
--- a/arch/arm64/boot/dts/mediatek/mt6357.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
@@ -60,7 +60,6 @@
 			};
 
 			mt6357_vfe28_reg: ldo-vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -75,7 +74,6 @@
 			};
 
 			mt6357_vrf18_reg: ldo-vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -83,7 +81,6 @@
 			};
 
 			mt6357_vrf12_reg: ldo-vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -112,7 +109,6 @@
 			};
 
 			mt6357_vcn28_reg: ldo-vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -120,7 +116,6 @@
 			};
 
 			mt6357_vcn18_reg: ldo-vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -142,7 +137,6 @@
 			};
 
 			mt6357_vcamio_reg: ldo-vcamio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -175,7 +169,6 @@
 			};
 
 			mt6357_vaux18_reg: ldo-vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -183,7 +176,6 @@
 			};
 
 			mt6357_vaud28_reg: ldo-vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -191,7 +183,6 @@
 			};
 
 			mt6357_vio28_reg: ldo-vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -199,7 +190,6 @@
 			};
 
 			mt6357_vio18_reg: ldo-vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
index 8e1b8c85c6ed..467d8a4c2aa7 100644
--- a/arch/arm64/boot/dts/mediatek/mt6359.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
@@ -8,16 +8,20 @@
 		compatible = "mediatek,mt6359";
 		interrupt-controller;
 		#interrupt-cells = <2>;
+		#sound-dai-cells = <1>;
 
 		pmic_adc: adc {
 			compatible = "mediatek,mt6359-auxadc";
 			#io-channel-cells = <1>;
 		};
 
-		mt6359codec: mt6359codec {
+		mt6359codec: audio-codec {
+			compatible = "mediatek,mt6359-codec";
 		};
 
 		regulators {
+			compatible = "mediatek,mt6359-regulator";
+
 			mt6359_vs1_buck_reg: buck_vs1 {
 				regulator-name = "vs1";
 				regulator-min-microvolt = <800000>;
@@ -296,7 +300,7 @@
 			};
 		};
 
-		mt6359rtc: mt6359rtc {
+		mt6359rtc: rtc {
 			compatible = "mediatek,mt6358-rtc";
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt6755.dtsi b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
index b55d3fac9bd4..8da5c0a56a02 100644
--- a/arch/arm64/boot/dts/mediatek/mt6755.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
@@ -98,7 +98,7 @@
 			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	sysirq: intpol-controller@10200620 {
+	sysirq: interrupt-controller@10200620 {
 		compatible = "mediatek,mt6755-sysirq",
 			     "mediatek,mt6577-sysirq";
 		interrupt-controller;
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 5c579e88e749..70f3375916e8 100644
--- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -138,7 +138,7 @@
 
 		};
 
-		sysirq: intpol-controller@c53a650 {
+		sysirq: interrupt-controller@c53a650 {
 			compatible = "mediatek,mt6779-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
index 91de920c2245..fccb948cfa45 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -212,7 +212,7 @@
 
 &mmc0 {
 	/* eMMC controller */
-	mediatek,latch-ck = <0x14>; /* hs400 */
+	mediatek,latch-ck = <4>; /* hs400 */
 	mediatek,hs200-cmd-int-delay = <1>;
 	mediatek,hs400-cmd-int-delay = <1>;
 	mediatek,hs400-ds-dly3 = <0x1a>;
@@ -227,6 +227,8 @@
 
 &mmc1 {
 	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
 	vmmc-supply = <&mt6331_vmc_reg>;
 	vqmmc-supply = <&mt6331_vmch_reg>;
 	status = "okay";
@@ -234,6 +236,8 @@
 
 &mmc2 {
 	/* SDIO WiFi on MMC2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
 	vmmc-supply = <&mt6331_vmc_reg>;
 	vqmmc-supply = <&mt6331_vmch_reg>;
 	status = "okay";
@@ -311,6 +315,40 @@
 		};
 	};
 
+	mmc1_pins_default: microsd-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO171__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO172__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO173__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO174__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO170__FUNC_MSDC1_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO175__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc2_pins_default: sdio-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO100__FUNC_MSDC2_DAT0>,
+				 <PINMUX_GPIO101__FUNC_MSDC2_DAT1>,
+				 <PINMUX_GPIO102__FUNC_MSDC2_DAT2>,
+				 <PINMUX_GPIO103__FUNC_MSDC2_DAT3>,
+				 <PINMUX_GPIO105__FUNC_MSDC2_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO104__FUNC_MSDC2_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
 	nfc_pins: nfc-pins {
 		pins-irq {
 			pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index e5e269a660b1..58833e5135c8 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -404,7 +404,7 @@
 			clock-names = "spi", "wrap";
 		};
 
-		sysirq: intpol-controller@10200620 {
+		sysirq: interrupt-controller@10200620 {
 			compatible = "mediatek,mt6795-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
@@ -427,6 +427,7 @@
 			clocks = <&infracfg CLK_INFRA_M4U>;
 			clock-names = "bclk";
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,infracfg = <&infracfg>;
 			mediatek,larbs = <&larb0 &larb1 &larb2 &larb3>;
 			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
 			#iommu-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 0e9d11b4585b..8ac98a378fd6 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -135,71 +135,71 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		uart0_pins_a: uart0 {
-			pins0 {
+		uart0_pins_a: uart0-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO234__FUNC_UTXD0>,
 					 <MT6797_GPIO235__FUNC_URXD0>;
 			};
 		};
 
-		uart1_pins_a: uart1 {
-			pins1 {
+		uart1_pins_a: uart1-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO232__FUNC_URXD1>,
 					 <MT6797_GPIO233__FUNC_UTXD1>;
 			};
 		};
 
-		i2c0_pins_a: i2c0 {
-			pins0 {
+		i2c0_pins_a: i2c0-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO37__FUNC_SCL0_0>,
 					 <MT6797_GPIO38__FUNC_SDA0_0>;
 			};
 		};
 
-		i2c1_pins_a: i2c1 {
-			pins1 {
+		i2c1_pins_a: i2c1-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO55__FUNC_SCL1_0>,
 					 <MT6797_GPIO56__FUNC_SDA1_0>;
 			};
 		};
 
-		i2c2_pins_a: i2c2 {
-			pins2 {
+		i2c2_pins_a: i2c2-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO96__FUNC_SCL2_0>,
 					 <MT6797_GPIO95__FUNC_SDA2_0>;
 			};
 		};
 
-		i2c3_pins_a: i2c3 {
-			pins3 {
+		i2c3_pins_a: i2c3-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO75__FUNC_SDA3_0>,
 					 <MT6797_GPIO74__FUNC_SCL3_0>;
 			};
 		};
 
-		i2c4_pins_a: i2c4 {
-			pins4 {
+		i2c4_pins_a: i2c4-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO238__FUNC_SDA4_0>,
 					 <MT6797_GPIO239__FUNC_SCL4_0>;
 			};
 		};
 
-		i2c5_pins_a: i2c5 {
-			pins5 {
+		i2c5_pins_a: i2c5-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO240__FUNC_SDA5_0>,
 					 <MT6797_GPIO241__FUNC_SCL5_0>;
 			};
 		};
 
-		i2c6_pins_a: i2c6 {
-			pins6 {
+		i2c6_pins_a: i2c6-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO152__FUNC_SDA6_0>,
 					 <MT6797_GPIO151__FUNC_SCL6_0>;
 			};
 		};
 
-		i2c7_pins_a: i2c7 {
-			pins7 {
+		i2c7_pins_a: i2c7-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO154__FUNC_SDA7_0>,
 					 <MT6797_GPIO153__FUNC_SCL7_0>;
 			};
@@ -228,7 +228,7 @@
 		#clock-cells = <1>;
 	};
 
-	sysirq: intpol-controller@10200620 {
+	sysirq: interrupt-controller@10200620 {
 		compatible = "mediatek,mt6797-sysirq",
 			     "mediatek,mt6577-sysirq";
 		interrupt-controller;
@@ -285,7 +285,6 @@
 	i2c0: i2c@11007000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <0>;
 		reg = <0 0x11007000 0 0x1000>,
 		      <0 0x11000100 0 0x80>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
@@ -301,7 +300,6 @@
 	i2c1: i2c@11008000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <1>;
 		reg = <0 0x11008000 0 0x1000>,
 		      <0 0x11000180 0 0x80>;
 		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
@@ -317,7 +315,6 @@
 	i2c8: i2c@11009000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <8>;
 		reg = <0 0x11009000 0 0x1000>,
 		      <0 0x11000200 0 0x80>;
 		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
@@ -334,7 +331,6 @@
 	i2c9: i2c@1100d000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <9>;
 		reg = <0 0x1100d000 0 0x1000>,
 		      <0 0x11000280 0 0x80>;
 		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -351,7 +347,6 @@
 	i2c6: i2c@1100e000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <6>;
 		reg = <0 0x1100e000 0 0x1000>,
 		      <0 0x11000500 0 0x80>;
 		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
@@ -367,7 +362,6 @@
 	i2c7: i2c@11010000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <7>;
 		reg = <0 0x11010000 0 0x1000>,
 		      <0 0x11000580 0 0x80>;
 		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
@@ -383,7 +377,6 @@
 	i2c4: i2c@11011000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <4>;
 		reg = <0 0x11011000 0 0x1000>,
 		      <0 0x11000300 0 0x80>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
@@ -399,7 +392,6 @@
 	i2c2: i2c@11013000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <2>;
 		reg = <0 0x11013000 0 0x1000>,
 		      <0 0x11000400 0 0x80>;
 		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
@@ -416,7 +408,6 @@
 	i2c3: i2c@11014000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <3>;
 		reg = <0 0x11014000 0 0x1000>,
 		      <0 0x11000480 0 0x80>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
@@ -433,7 +424,6 @@
 	i2c5: i2c@1101c000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <5>;
 		reg = <0 0x1101c000 0 0x1000>,
 		      <0 0x11000380 0 0x80>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6878-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt6878-pinfunc.h
new file mode 100644
index 000000000000..4e8e475a7454
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6878-pinfunc.h
@@ -0,0 +1,1201 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Light Hsieh <light.hsieh@mediatek.com>
+ *
+ * Copyright (C) 2025 Igor Belwon <igor.belwon@mentallysanemainliners.org>
+ */
+
+#ifndef __MT6878_PINFUNC_H
+#define __MT6878_PINFUNC_H
+
+#include "mt65xx.h"
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_SRCLKENA1 (MTK_PIN_NO(0) | 2)
+#define PINMUX_GPIO0__FUNC_DBG_MON_A3 (MTK_PIN_NO(0) | 7)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_SRCLKENA1 (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_SRCLKENA2 (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_IDDIG (MTK_PIN_NO(1) | 5)
+#define PINMUX_GPIO1__FUNC_DBG_MON_A4 (MTK_PIN_NO(1) | 7)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_SRCLKENAI0 (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(2) | 4)
+#define PINMUX_GPIO2__FUNC_DMIC_CLK (MTK_PIN_NO(2) | 5)
+#define PINMUX_GPIO2__FUNC_DBG_MON_A5 (MTK_PIN_NO(2) | 7)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_SRCLKENAI1 (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(3) | 4)
+#define PINMUX_GPIO3__FUNC_DMIC_DAT (MTK_PIN_NO(3) | 5)
+#define PINMUX_GPIO3__FUNC_DBG_MON_A6 (MTK_PIN_NO(3) | 7)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_SPI7_CLK (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 2)
+#define PINMUX_GPIO4__FUNC_ANT_SEL0 (MTK_PIN_NO(4) | 3)
+#define PINMUX_GPIO4__FUNC_DMIC1_CLK (MTK_PIN_NO(4) | 5)
+#define PINMUX_GPIO4__FUNC_MD_INT4 (MTK_PIN_NO(4) | 6)
+#define PINMUX_GPIO4__FUNC_DBG_MON_A7 (MTK_PIN_NO(4) | 7)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_SPI7_CSB (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 2)
+#define PINMUX_GPIO5__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 3)
+#define PINMUX_GPIO5__FUNC_DMIC1_DAT (MTK_PIN_NO(5) | 5)
+#define PINMUX_GPIO5__FUNC_MD_INT0 (MTK_PIN_NO(5) | 6)
+#define PINMUX_GPIO5__FUNC_DBG_MON_A8 (MTK_PIN_NO(5) | 7)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_SPI7_MO (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 2)
+#define PINMUX_GPIO6__FUNC_ANT_SEL2 (MTK_PIN_NO(6) | 3)
+#define PINMUX_GPIO6__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(6) | 4)
+#define PINMUX_GPIO6__FUNC_MD_INT3 (MTK_PIN_NO(6) | 6)
+#define PINMUX_GPIO6__FUNC_DBG_MON_B0 (MTK_PIN_NO(6) | 7)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_SPI7_MI (MTK_PIN_NO(7) | 1)
+#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_ANT_SEL3 (MTK_PIN_NO(7) | 3)
+#define PINMUX_GPIO7__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(7) | 4)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_SCP_JTAG0_TRSTN_VLP (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_SPM_JTAG_TRSTN_VLP (MTK_PIN_NO(8) | 3)
+#define PINMUX_GPIO8__FUNC_SSPM_JTAG_TRSTN_VLP (MTK_PIN_NO(8) | 4)
+#define PINMUX_GPIO8__FUNC_HFRP_JTAG0_TRSTN (MTK_PIN_NO(8) | 5)
+#define PINMUX_GPIO8__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(8) | 6)
+#define PINMUX_GPIO8__FUNC_CONN_BGF_MCU_TDI (MTK_PIN_NO(8) | 7)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_SCP_JTAG0_TCK_VLP (MTK_PIN_NO(9) | 2)
+#define PINMUX_GPIO9__FUNC_SPM_JTAG_TCK_VLP (MTK_PIN_NO(9) | 3)
+#define PINMUX_GPIO9__FUNC_SSPM_JTAG_TCK_VLP (MTK_PIN_NO(9) | 4)
+#define PINMUX_GPIO9__FUNC_HFRP_JTAG0_TCK (MTK_PIN_NO(9) | 5)
+#define PINMUX_GPIO9__FUNC_IO_JTAG_TCK (MTK_PIN_NO(9) | 6)
+#define PINMUX_GPIO9__FUNC_CONN_BGF_MCU_TRST_B (MTK_PIN_NO(9) | 7)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_SCP_JTAG0_TMS_VLP (MTK_PIN_NO(10) | 2)
+#define PINMUX_GPIO10__FUNC_SPM_JTAG_TMS_VLP (MTK_PIN_NO(10) | 3)
+#define PINMUX_GPIO10__FUNC_SSPM_JTAG_TMS_VLP (MTK_PIN_NO(10) | 4)
+#define PINMUX_GPIO10__FUNC_HFRP_JTAG0_TMS (MTK_PIN_NO(10) | 5)
+#define PINMUX_GPIO10__FUNC_IO_JTAG_TMS (MTK_PIN_NO(10) | 6)
+#define PINMUX_GPIO10__FUNC_CONN_BGF_MCU_TCK (MTK_PIN_NO(10) | 7)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_SCP_JTAG0_TDI_VLP (MTK_PIN_NO(11) | 2)
+#define PINMUX_GPIO11__FUNC_SPM_JTAG_TDI_VLP (MTK_PIN_NO(11) | 3)
+#define PINMUX_GPIO11__FUNC_SSPM_JTAG_TDI_VLP (MTK_PIN_NO(11) | 4)
+#define PINMUX_GPIO11__FUNC_HFRP_JTAG0_TDI (MTK_PIN_NO(11) | 5)
+#define PINMUX_GPIO11__FUNC_IO_JTAG_TDI (MTK_PIN_NO(11) | 6)
+#define PINMUX_GPIO11__FUNC_CONN_BGF_MCU_TDO (MTK_PIN_NO(11) | 7)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_SCP_JTAG0_TDO_VLP (MTK_PIN_NO(12) | 2)
+#define PINMUX_GPIO12__FUNC_SPM_JTAG_TDO_VLP (MTK_PIN_NO(12) | 3)
+#define PINMUX_GPIO12__FUNC_SSPM_JTAG_TDO_VLP (MTK_PIN_NO(12) | 4)
+#define PINMUX_GPIO12__FUNC_HFRP_JTAG0_TDO (MTK_PIN_NO(12) | 5)
+#define PINMUX_GPIO12__FUNC_IO_JTAG_TDO (MTK_PIN_NO(12) | 6)
+#define PINMUX_GPIO12__FUNC_CONN_BGF_MCU_TMS (MTK_PIN_NO(12) | 7)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_MFG_EB_JTAG_TDI (MTK_PIN_NO(13) | 1)
+#define PINMUX_GPIO13__FUNC_CONN_WF_MCU_TDI (MTK_PIN_NO(13) | 2)
+#define PINMUX_GPIO13__FUNC_SCP_JTAG0_TDI_VCORE (MTK_PIN_NO(13) | 3)
+#define PINMUX_GPIO13__FUNC_SPM_JTAG_TDI_VCORE (MTK_PIN_NO(13) | 5)
+#define PINMUX_GPIO13__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(13) | 6)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_MFG_EB_JTAG_TRSTN (MTK_PIN_NO(14) | 1)
+#define PINMUX_GPIO14__FUNC_CONN_WF_MCU_TRST_B (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_SCP_JTAG0_TRSTN_VCORE (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_SPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(14) | 6)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_MFG_EB_JTAG_TCK (MTK_PIN_NO(15) | 1)
+#define PINMUX_GPIO15__FUNC_CONN_WF_MCU_TCK (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_SCP_JTAG0_TCK_VCORE (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_SPM_JTAG_TCK_VCORE (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(15) | 6)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_MFG_EB_JTAG_TDO (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_CONN_WF_MCU_TDO (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_SCP_JTAG0_TDO_VCORE (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_SPM_JTAG_TDO_VCORE (MTK_PIN_NO(16) | 5)
+#define PINMUX_GPIO16__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(16) | 6)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_MFG_EB_JTAG_TMS (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_CONN_WF_MCU_TMS (MTK_PIN_NO(17) | 2)
+#define PINMUX_GPIO17__FUNC_SCP_JTAG0_TMS_VCORE (MTK_PIN_NO(17) | 3)
+#define PINMUX_GPIO17__FUNC_SPM_JTAG_TMS_VCORE (MTK_PIN_NO(17) | 5)
+#define PINMUX_GPIO17__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(17) | 6)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_CONN_BT_TXD (MTK_PIN_NO(18) | 2)
+#define PINMUX_GPIO18__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(18) | 3)
+#define PINMUX_GPIO18__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(18) | 6)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_PWM_0 (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_SDA10 (MTK_PIN_NO(19) | 3)
+#define PINMUX_GPIO19__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(19) | 4)
+#define PINMUX_GPIO19__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(19) | 5)
+#define PINMUX_GPIO19__FUNC_DBG_MON_A9 (MTK_PIN_NO(19) | 7)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_PWM_1 (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_SPI4_CLK (MTK_PIN_NO(20) | 2)
+#define PINMUX_GPIO20__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(20) | 4)
+#define PINMUX_GPIO20__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(20) | 6)
+#define PINMUX_GPIO20__FUNC_DBG_MON_A10 (MTK_PIN_NO(20) | 7)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_PWM_2 (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_SPI4_CSB (MTK_PIN_NO(21) | 2)
+#define PINMUX_GPIO21__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(21) | 4)
+#define PINMUX_GPIO21__FUNC_IDDIG (MTK_PIN_NO(21) | 5)
+#define PINMUX_GPIO21__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(21) | 6)
+#define PINMUX_GPIO21__FUNC_DBG_MON_A11 (MTK_PIN_NO(21) | 7)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_PWM_3 (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_SPI4_MO (MTK_PIN_NO(22) | 2)
+#define PINMUX_GPIO22__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 4)
+#define PINMUX_GPIO22__FUNC_VBUSVALID (MTK_PIN_NO(22) | 5)
+#define PINMUX_GPIO22__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(22) | 6)
+#define PINMUX_GPIO22__FUNC_DBG_MON_A12 (MTK_PIN_NO(22) | 7)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_SPI4_MI (MTK_PIN_NO(23) | 2)
+#define PINMUX_GPIO23__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(23) | 4)
+#define PINMUX_GPIO23__FUNC_USB_DRVVBUS (MTK_PIN_NO(23) | 5)
+#define PINMUX_GPIO23__FUNC_DAP_MD32_SWD (MTK_PIN_NO(23) | 6)
+#define PINMUX_GPIO23__FUNC_DBG_MON_A13 (MTK_PIN_NO(23) | 7)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(24) | 1)
+#define PINMUX_GPIO24__FUNC_SCL12 (MTK_PIN_NO(24) | 2)
+#define PINMUX_GPIO24__FUNC_SCL10 (MTK_PIN_NO(24) | 3)
+#define PINMUX_GPIO24__FUNC_CMVREF0 (MTK_PIN_NO(24) | 4)
+#define PINMUX_GPIO24__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(24) | 5)
+#define PINMUX_GPIO24__FUNC_CMFLASH0 (MTK_PIN_NO(24) | 6)
+#define PINMUX_GPIO24__FUNC_DBG_MON_A14 (MTK_PIN_NO(24) | 7)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_SPI6_CLK (MTK_PIN_NO(25) | 1)
+#define PINMUX_GPIO25__FUNC_SCL11 (MTK_PIN_NO(25) | 2)
+#define PINMUX_GPIO25__FUNC_CMVREF1 (MTK_PIN_NO(25) | 4)
+#define PINMUX_GPIO25__FUNC_CMFLASH1 (MTK_PIN_NO(25) | 6)
+#define PINMUX_GPIO25__FUNC_DBG_MON_A15 (MTK_PIN_NO(25) | 7)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_SPI6_CSB (MTK_PIN_NO(26) | 1)
+#define PINMUX_GPIO26__FUNC_SDA11 (MTK_PIN_NO(26) | 2)
+#define PINMUX_GPIO26__FUNC_USB_DRVVBUS (MTK_PIN_NO(26) | 3)
+#define PINMUX_GPIO26__FUNC_CMVREF2 (MTK_PIN_NO(26) | 4)
+#define PINMUX_GPIO26__FUNC_CMFLASH2 (MTK_PIN_NO(26) | 6)
+#define PINMUX_GPIO26__FUNC_DBG_MON_A16 (MTK_PIN_NO(26) | 7)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_SPI6_MO (MTK_PIN_NO(27) | 1)
+#define PINMUX_GPIO27__FUNC_VBUSVALID (MTK_PIN_NO(27) | 3)
+#define PINMUX_GPIO27__FUNC_CMVREF3 (MTK_PIN_NO(27) | 4)
+#define PINMUX_GPIO27__FUNC_DMIC1_CLK (MTK_PIN_NO(27) | 5)
+#define PINMUX_GPIO27__FUNC_CMFLASH3 (MTK_PIN_NO(27) | 6)
+#define PINMUX_GPIO27__FUNC_DBG_MON_A17 (MTK_PIN_NO(27) | 7)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_SPI6_MI (MTK_PIN_NO(28) | 1)
+#define PINMUX_GPIO28__FUNC_IDDIG (MTK_PIN_NO(28) | 3)
+#define PINMUX_GPIO28__FUNC_DMIC1_DAT (MTK_PIN_NO(28) | 5)
+#define PINMUX_GPIO28__FUNC_CMFLASH0 (MTK_PIN_NO(28) | 6)
+#define PINMUX_GPIO28__FUNC_DBG_MON_A18 (MTK_PIN_NO(28) | 7)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_I2SIN2_BCK (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_TP_UTXD1_VCORE (MTK_PIN_NO(29) | 2)
+#define PINMUX_GPIO29__FUNC_MD_UTXD0 (MTK_PIN_NO(29) | 3)
+#define PINMUX_GPIO29__FUNC_SSPM_UTXD_AO_VCORE (MTK_PIN_NO(29) | 4)
+#define PINMUX_GPIO29__FUNC_MD32_1_TXD (MTK_PIN_NO(29) | 5)
+#define PINMUX_GPIO29__FUNC_CONN_BT_TXD (MTK_PIN_NO(29) | 6)
+#define PINMUX_GPIO29__FUNC_PTA_TXD (MTK_PIN_NO(29) | 7)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_I2SIN2_LRCK (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_TP_URXD1_VCORE (MTK_PIN_NO(30) | 2)
+#define PINMUX_GPIO30__FUNC_MD_URXD0 (MTK_PIN_NO(30) | 3)
+#define PINMUX_GPIO30__FUNC_SSPM_URXD_AO_VCORE (MTK_PIN_NO(30) | 4)
+#define PINMUX_GPIO30__FUNC_MD32_1_RXD (MTK_PIN_NO(30) | 5)
+#define PINMUX_GPIO30__FUNC_PTA_RXD (MTK_PIN_NO(30) | 7)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_I2SOUT2_DO (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_TP_UTXD2_VCORE (MTK_PIN_NO(31) | 2)
+#define PINMUX_GPIO31__FUNC_MD_UTXD1 (MTK_PIN_NO(31) | 3)
+#define PINMUX_GPIO31__FUNC_HFRP_UTXD1 (MTK_PIN_NO(31) | 4)
+#define PINMUX_GPIO31__FUNC_MD32_0_TXD (MTK_PIN_NO(31) | 5)
+#define PINMUX_GPIO31__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(31) | 6)
+#define PINMUX_GPIO31__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(31) | 7)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_I2SIN2_DI (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_TP_URXD2_VCORE (MTK_PIN_NO(32) | 2)
+#define PINMUX_GPIO32__FUNC_MD_URXD1 (MTK_PIN_NO(32) | 3)
+#define PINMUX_GPIO32__FUNC_HFRP_URXD1 (MTK_PIN_NO(32) | 4)
+#define PINMUX_GPIO32__FUNC_MD32_0_RXD (MTK_PIN_NO(32) | 5)
+#define PINMUX_GPIO32__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(32) | 7)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_ANT_SEL0 (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(33) | 3)
+#define PINMUX_GPIO33__FUNC_SCL1 (MTK_PIN_NO(33) | 4)
+#define PINMUX_GPIO33__FUNC_CONN_BPI_BUS18_ANT1 (MTK_PIN_NO(33) | 5)
+#define PINMUX_GPIO33__FUNC_MD_UCTS0 (MTK_PIN_NO(33) | 6)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_ANT_SEL1 (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(34) | 3)
+#define PINMUX_GPIO34__FUNC_SDA1 (MTK_PIN_NO(34) | 4)
+#define PINMUX_GPIO34__FUNC_CONN_BPI_BUS19_ANT2 (MTK_PIN_NO(34) | 5)
+#define PINMUX_GPIO34__FUNC_MD_URTS0 (MTK_PIN_NO(34) | 6)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_ANT_SEL2 (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_SSPM_JTAG_TCK_VCORE (MTK_PIN_NO(35) | 2)
+#define PINMUX_GPIO35__FUNC_UDI_TCK (MTK_PIN_NO(35) | 3)
+#define PINMUX_GPIO35__FUNC_CONN_BPI_BUS20_ANT3 (MTK_PIN_NO(35) | 5)
+#define PINMUX_GPIO35__FUNC_MD_UCTS1 (MTK_PIN_NO(35) | 6)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_ANT_SEL3 (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_SSPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(36) | 2)
+#define PINMUX_GPIO36__FUNC_UDI_NTRST (MTK_PIN_NO(36) | 3)
+#define PINMUX_GPIO36__FUNC_CONN_BPI_BUS21_ANT4 (MTK_PIN_NO(36) | 5)
+#define PINMUX_GPIO36__FUNC_MD_URTS1 (MTK_PIN_NO(36) | 6)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_ANT_SEL4 (MTK_PIN_NO(37) | 1)
+#define PINMUX_GPIO37__FUNC_SSPM_JTAG_TDI_VCORE (MTK_PIN_NO(37) | 2)
+#define PINMUX_GPIO37__FUNC_UDI_TDI (MTK_PIN_NO(37) | 3)
+#define PINMUX_GPIO37__FUNC_TP_UCTS1_VCORE (MTK_PIN_NO(37) | 6)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_ANT_SEL5 (MTK_PIN_NO(38) | 1)
+#define PINMUX_GPIO38__FUNC_SSPM_JTAG_TMS_VCORE (MTK_PIN_NO(38) | 2)
+#define PINMUX_GPIO38__FUNC_UDI_TMS (MTK_PIN_NO(38) | 3)
+#define PINMUX_GPIO38__FUNC_TP_URTS1_VCORE (MTK_PIN_NO(38) | 6)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_ANT_SEL6 (MTK_PIN_NO(39) | 1)
+#define PINMUX_GPIO39__FUNC_SSPM_JTAG_TDO_VCORE (MTK_PIN_NO(39) | 2)
+#define PINMUX_GPIO39__FUNC_UDI_TDO (MTK_PIN_NO(39) | 3)
+#define PINMUX_GPIO39__FUNC_CLKM3 (MTK_PIN_NO(39) | 5)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_ANT_SEL7 (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_PMSR_SMAP (MTK_PIN_NO(40) | 2)
+#define PINMUX_GPIO40__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(40) | 3)
+#define PINMUX_GPIO40__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(40) | 4)
+#define PINMUX_GPIO40__FUNC_GPS_PPS (MTK_PIN_NO(40) | 5)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_I2SIN1_MCK (MTK_PIN_NO(41) | 1)
+#define PINMUX_GPIO41__FUNC_IDDIG (MTK_PIN_NO(41) | 2)
+#define PINMUX_GPIO41__FUNC_GPS_PPS (MTK_PIN_NO(41) | 3)
+#define PINMUX_GPIO41__FUNC_HFRP_UCTS1 (MTK_PIN_NO(41) | 4)
+#define PINMUX_GPIO41__FUNC_TP_UCTS2_VCORE (MTK_PIN_NO(41) | 5)
+#define PINMUX_GPIO41__FUNC_ANT_SEL8 (MTK_PIN_NO(41) | 6)
+#define PINMUX_GPIO41__FUNC_DBG_MON_B1 (MTK_PIN_NO(41) | 7)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_I2SIN1_BCK (MTK_PIN_NO(42) | 1)
+#define PINMUX_GPIO42__FUNC_I2SIN4_BCK (MTK_PIN_NO(42) | 2)
+#define PINMUX_GPIO42__FUNC_HFRP_URTS1 (MTK_PIN_NO(42) | 4)
+#define PINMUX_GPIO42__FUNC_TP_URTS2_VCORE (MTK_PIN_NO(42) | 5)
+#define PINMUX_GPIO42__FUNC_ANT_SEL9 (MTK_PIN_NO(42) | 6)
+#define PINMUX_GPIO42__FUNC_DBG_MON_B2 (MTK_PIN_NO(42) | 7)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_I2SIN1_LRCK (MTK_PIN_NO(43) | 1)
+#define PINMUX_GPIO43__FUNC_I2SIN4_LRCK (MTK_PIN_NO(43) | 2)
+#define PINMUX_GPIO43__FUNC_ANT_SEL10 (MTK_PIN_NO(43) | 6)
+#define PINMUX_GPIO43__FUNC_DBG_MON_B3 (MTK_PIN_NO(43) | 7)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_I2SOUT1_DO (MTK_PIN_NO(44) | 1)
+#define PINMUX_GPIO44__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(44) | 2)
+#define PINMUX_GPIO44__FUNC_ANT_SEL11 (MTK_PIN_NO(44) | 6)
+#define PINMUX_GPIO44__FUNC_DBG_MON_B4 (MTK_PIN_NO(44) | 7)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_I2SIN1_DI (MTK_PIN_NO(45) | 1)
+#define PINMUX_GPIO45__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(45) | 2)
+#define PINMUX_GPIO45__FUNC_AGPS_SYNC (MTK_PIN_NO(45) | 5)
+#define PINMUX_GPIO45__FUNC_ANT_SEL12 (MTK_PIN_NO(45) | 6)
+#define PINMUX_GPIO45__FUNC_DBG_MON_B5 (MTK_PIN_NO(45) | 7)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(46) | 1)
+#define PINMUX_GPIO46__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(46) | 2)
+#define PINMUX_GPIO46__FUNC_SRCLKENAI0 (MTK_PIN_NO(46) | 3)
+#define PINMUX_GPIO46__FUNC_SSPM_UTXD_AO_VLP (MTK_PIN_NO(46) | 5)
+#define PINMUX_GPIO46__FUNC_MD_MCIF_UTXD0 (MTK_PIN_NO(46) | 6)
+#define PINMUX_GPIO46__FUNC_DBG_MON_B6 (MTK_PIN_NO(46) | 7)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(47) | 1)
+#define PINMUX_GPIO47__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(47) | 2)
+#define PINMUX_GPIO47__FUNC_SRCLKENAI1 (MTK_PIN_NO(47) | 3)
+#define PINMUX_GPIO47__FUNC_SRCLKENA1 (MTK_PIN_NO(47) | 4)
+#define PINMUX_GPIO47__FUNC_SSPM_URXD_AO_VLP (MTK_PIN_NO(47) | 5)
+#define PINMUX_GPIO47__FUNC_MD_MCIF_URXD0 (MTK_PIN_NO(47) | 6)
+#define PINMUX_GPIO47__FUNC_DBG_MON_B7 (MTK_PIN_NO(47) | 7)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_UTXD0 (MTK_PIN_NO(48) | 1)
+#define PINMUX_GPIO48__FUNC_MD_UTXD1 (MTK_PIN_NO(48) | 3)
+#define PINMUX_GPIO48__FUNC_HFRP_UTXD1 (MTK_PIN_NO(48) | 4)
+#define PINMUX_GPIO48__FUNC_MD32_0_TXD (MTK_PIN_NO(48) | 5)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_URXD0 (MTK_PIN_NO(49) | 1)
+#define PINMUX_GPIO49__FUNC_MD_URXD1 (MTK_PIN_NO(49) | 3)
+#define PINMUX_GPIO49__FUNC_HFRP_URXD1 (MTK_PIN_NO(49) | 4)
+#define PINMUX_GPIO49__FUNC_MD32_0_RXD (MTK_PIN_NO(49) | 5)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_MD_UTXD0 (MTK_PIN_NO(50) | 1)
+#define PINMUX_GPIO50__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(50) | 2)
+#define PINMUX_GPIO50__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(50) | 3)
+#define PINMUX_GPIO50__FUNC_SSPM_UTXD_AO_VLP (MTK_PIN_NO(50) | 4)
+#define PINMUX_GPIO50__FUNC_MD_MCIF_UTXD0 (MTK_PIN_NO(50) | 5)
+#define PINMUX_GPIO50__FUNC_TP_UTXD2_VLP (MTK_PIN_NO(50) | 6)
+#define PINMUX_GPIO50__FUNC_UTXD1 (MTK_PIN_NO(50) | 7)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_MD_URXD0 (MTK_PIN_NO(51) | 1)
+#define PINMUX_GPIO51__FUNC_TP_URXD1_VLP (MTK_PIN_NO(51) | 2)
+#define PINMUX_GPIO51__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(51) | 3)
+#define PINMUX_GPIO51__FUNC_SSPM_URXD_AO_VLP (MTK_PIN_NO(51) | 4)
+#define PINMUX_GPIO51__FUNC_MD_MCIF_URXD0 (MTK_PIN_NO(51) | 5)
+#define PINMUX_GPIO51__FUNC_TP_URXD2_VLP (MTK_PIN_NO(51) | 6)
+#define PINMUX_GPIO51__FUNC_URXD1 (MTK_PIN_NO(51) | 7)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_KPROW0 (MTK_PIN_NO(52) | 1)
+#define PINMUX_GPIO52__FUNC_CMFLASH0 (MTK_PIN_NO(52) | 2)
+#define PINMUX_GPIO52__FUNC_SDA12 (MTK_PIN_NO(52) | 3)
+#define PINMUX_GPIO52__FUNC_DSI_TE1 (MTK_PIN_NO(52) | 4)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_KPROW1 (MTK_PIN_NO(53) | 1)
+#define PINMUX_GPIO53__FUNC_CMFLASH1 (MTK_PIN_NO(53) | 2)
+#define PINMUX_GPIO53__FUNC_SCL12 (MTK_PIN_NO(53) | 3)
+#define PINMUX_GPIO53__FUNC_LCM_RST1 (MTK_PIN_NO(53) | 4)
+#define PINMUX_GPIO53__FUNC_EXTIF0_ACT (MTK_PIN_NO(53) | 6)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_KPCOL0_VLP (MTK_PIN_NO(54) | 1)
+#define PINMUX_GPIO54__FUNC_KPCOL0_VLP_A (MTK_PIN_NO(54) | 7)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_KPCOL1 (MTK_PIN_NO(55) | 1)
+#define PINMUX_GPIO55__FUNC_SDA12 (MTK_PIN_NO(55) | 3)
+#define PINMUX_GPIO55__FUNC_DISP_PWM1 (MTK_PIN_NO(55) | 4)
+#define PINMUX_GPIO55__FUNC_JTRSTN_SEL1_VCORE (MTK_PIN_NO(55) | 7)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_SPI0_CLK (MTK_PIN_NO(56) | 1)
+#define PINMUX_GPIO56__FUNC_JTCK_SEL1_VCORE (MTK_PIN_NO(56) | 7)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_SPI0_CSB (MTK_PIN_NO(57) | 1)
+#define PINMUX_GPIO57__FUNC_JTMS_SEL1_VCORE (MTK_PIN_NO(57) | 7)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_SPI0_MO (MTK_PIN_NO(58) | 1)
+#define PINMUX_GPIO58__FUNC_JTDO_SEL1_VCORE (MTK_PIN_NO(58) | 7)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_SPI0_MI (MTK_PIN_NO(59) | 1)
+#define PINMUX_GPIO59__FUNC_JTDI_SEL1_VCORE (MTK_PIN_NO(59) | 7)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_SCP_SPI1_CK (MTK_PIN_NO(60) | 1)
+#define PINMUX_GPIO60__FUNC_SPI1_CLK (MTK_PIN_NO(60) | 2)
+#define PINMUX_GPIO60__FUNC_SCP_SCL3 (MTK_PIN_NO(60) | 4)
+#define PINMUX_GPIO60__FUNC_TP_GPIO0_AO (MTK_PIN_NO(60) | 5)
+#define PINMUX_GPIO60__FUNC_UTXD0 (MTK_PIN_NO(60) | 6)
+#define PINMUX_GPIO60__FUNC_TP_UTXD2_VLP (MTK_PIN_NO(60) | 7)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_SCP_SPI1_CS (MTK_PIN_NO(61) | 1)
+#define PINMUX_GPIO61__FUNC_SPI1_CSB (MTK_PIN_NO(61) | 2)
+#define PINMUX_GPIO61__FUNC_TP_GPIO1_AO (MTK_PIN_NO(61) | 5)
+#define PINMUX_GPIO61__FUNC_URXD0 (MTK_PIN_NO(61) | 6)
+#define PINMUX_GPIO61__FUNC_TP_URXD2_VLP (MTK_PIN_NO(61) | 7)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_SCP_SPI1_MO (MTK_PIN_NO(62) | 1)
+#define PINMUX_GPIO62__FUNC_SPI1_MO (MTK_PIN_NO(62) | 2)
+#define PINMUX_GPIO62__FUNC_SCP_SCL3 (MTK_PIN_NO(62) | 3)
+#define PINMUX_GPIO62__FUNC_SCP_SDA3 (MTK_PIN_NO(62) | 4)
+#define PINMUX_GPIO62__FUNC_TP_GPIO2_AO (MTK_PIN_NO(62) | 5)
+#define PINMUX_GPIO62__FUNC_DBG_MON_B29 (MTK_PIN_NO(62) | 7)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_SCP_SPI1_MI (MTK_PIN_NO(63) | 1)
+#define PINMUX_GPIO63__FUNC_SPI1_MI (MTK_PIN_NO(63) | 2)
+#define PINMUX_GPIO63__FUNC_SCP_SDA3 (MTK_PIN_NO(63) | 3)
+#define PINMUX_GPIO63__FUNC_TP_GPIO3_AO (MTK_PIN_NO(63) | 5)
+#define PINMUX_GPIO63__FUNC_DBG_MON_B30 (MTK_PIN_NO(63) | 7)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_SCP_SPI2_CK (MTK_PIN_NO(64) | 1)
+#define PINMUX_GPIO64__FUNC_SPI2_CLK (MTK_PIN_NO(64) | 2)
+#define PINMUX_GPIO64__FUNC_SCP_SCL2 (MTK_PIN_NO(64) | 4)
+#define PINMUX_GPIO64__FUNC_TP_GPIO4_AO (MTK_PIN_NO(64) | 5)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_SCP_SPI2_CS (MTK_PIN_NO(65) | 1)
+#define PINMUX_GPIO65__FUNC_SPI2_CSB (MTK_PIN_NO(65) | 2)
+#define PINMUX_GPIO65__FUNC_TP_GPIO5_AO (MTK_PIN_NO(65) | 5)
+#define PINMUX_GPIO65__FUNC_DBG_MON_B31 (MTK_PIN_NO(65) | 7)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_SCP_SPI2_MO (MTK_PIN_NO(66) | 1)
+#define PINMUX_GPIO66__FUNC_SPI2_MO (MTK_PIN_NO(66) | 2)
+#define PINMUX_GPIO66__FUNC_SCP_SCL2 (MTK_PIN_NO(66) | 3)
+#define PINMUX_GPIO66__FUNC_SCP_SDA2 (MTK_PIN_NO(66) | 4)
+#define PINMUX_GPIO66__FUNC_TP_GPIO6_AO (MTK_PIN_NO(66) | 5)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_SCP_SPI2_MI (MTK_PIN_NO(67) | 1)
+#define PINMUX_GPIO67__FUNC_SPI2_MI (MTK_PIN_NO(67) | 2)
+#define PINMUX_GPIO67__FUNC_SCP_SDA2 (MTK_PIN_NO(67) | 3)
+#define PINMUX_GPIO67__FUNC_TP_GPIO7_AO (MTK_PIN_NO(67) | 5)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_SCP_SPI3_CK (MTK_PIN_NO(68) | 1)
+#define PINMUX_GPIO68__FUNC_SPI3_CLK (MTK_PIN_NO(68) | 2)
+#define PINMUX_GPIO68__FUNC_MD_INT4 (MTK_PIN_NO(68) | 3)
+#define PINMUX_GPIO68__FUNC_SCP_SCL4 (MTK_PIN_NO(68) | 4)
+#define PINMUX_GPIO68__FUNC_TP_GPIO8_AO (MTK_PIN_NO(68) | 5)
+#define PINMUX_GPIO68__FUNC_DBG_MON_A19 (MTK_PIN_NO(68) | 7)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_SCP_SPI3_CS (MTK_PIN_NO(69) | 1)
+#define PINMUX_GPIO69__FUNC_SPI3_CSB (MTK_PIN_NO(69) | 2)
+#define PINMUX_GPIO69__FUNC_MD_INT3 (MTK_PIN_NO(69) | 3)
+#define PINMUX_GPIO69__FUNC_TP_GPIO9_AO (MTK_PIN_NO(69) | 5)
+#define PINMUX_GPIO69__FUNC_DBG_MON_A20 (MTK_PIN_NO(69) | 7)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_SCP_SPI3_MO (MTK_PIN_NO(70) | 1)
+#define PINMUX_GPIO70__FUNC_SPI3_MO (MTK_PIN_NO(70) | 2)
+#define PINMUX_GPIO70__FUNC_SCP_SCL4 (MTK_PIN_NO(70) | 3)
+#define PINMUX_GPIO70__FUNC_SCP_SDA4 (MTK_PIN_NO(70) | 4)
+#define PINMUX_GPIO70__FUNC_TP_GPIO10_AO (MTK_PIN_NO(70) | 5)
+#define PINMUX_GPIO70__FUNC_DBG_MON_A21 (MTK_PIN_NO(70) | 7)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define PINMUX_GPIO71__FUNC_SCP_SPI3_MI (MTK_PIN_NO(71) | 1)
+#define PINMUX_GPIO71__FUNC_SPI3_MI (MTK_PIN_NO(71) | 2)
+#define PINMUX_GPIO71__FUNC_SCP_SDA4 (MTK_PIN_NO(71) | 3)
+#define PINMUX_GPIO71__FUNC_MD_INT0 (MTK_PIN_NO(71) | 4)
+#define PINMUX_GPIO71__FUNC_TP_GPIO11_AO (MTK_PIN_NO(71) | 5)
+#define PINMUX_GPIO71__FUNC_DBG_MON_A22 (MTK_PIN_NO(71) | 7)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define PINMUX_GPIO72__FUNC_SPI5_CLK (MTK_PIN_NO(72) | 1)
+#define PINMUX_GPIO72__FUNC_SCP_SPI0_CK (MTK_PIN_NO(72) | 2)
+#define PINMUX_GPIO72__FUNC_UCTS2 (MTK_PIN_NO(72) | 3)
+#define PINMUX_GPIO72__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(72) | 4)
+#define PINMUX_GPIO72__FUNC_TP_GPIO12_AO (MTK_PIN_NO(72) | 5)
+#define PINMUX_GPIO72__FUNC_EXTIF0_ACT (MTK_PIN_NO(72) | 6)
+#define PINMUX_GPIO72__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(72) | 7)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define PINMUX_GPIO73__FUNC_SPI5_CSB (MTK_PIN_NO(73) | 1)
+#define PINMUX_GPIO73__FUNC_SCP_SPI0_CS (MTK_PIN_NO(73) | 2)
+#define PINMUX_GPIO73__FUNC_URTS2 (MTK_PIN_NO(73) | 3)
+#define PINMUX_GPIO73__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(73) | 4)
+#define PINMUX_GPIO73__FUNC_TP_GPIO13_AO (MTK_PIN_NO(73) | 5)
+#define PINMUX_GPIO73__FUNC_EXTIF0_PRI (MTK_PIN_NO(73) | 6)
+#define PINMUX_GPIO73__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(73) | 7)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_SPI5_MO (MTK_PIN_NO(74) | 1)
+#define PINMUX_GPIO74__FUNC_SCP_SPI0_MO (MTK_PIN_NO(74) | 2)
+#define PINMUX_GPIO74__FUNC_UTXD2 (MTK_PIN_NO(74) | 3)
+#define PINMUX_GPIO74__FUNC_TP_UTXD2_VCORE (MTK_PIN_NO(74) | 4)
+#define PINMUX_GPIO74__FUNC_TP_GPIO14_AO (MTK_PIN_NO(74) | 5)
+#define PINMUX_GPIO74__FUNC_EXTIF0_GNT_B (MTK_PIN_NO(74) | 6)
+#define PINMUX_GPIO74__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(74) | 7)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_SPI5_MI (MTK_PIN_NO(75) | 1)
+#define PINMUX_GPIO75__FUNC_SCP_SPI0_MI (MTK_PIN_NO(75) | 2)
+#define PINMUX_GPIO75__FUNC_URXD2 (MTK_PIN_NO(75) | 3)
+#define PINMUX_GPIO75__FUNC_TP_URXD2_VCORE (MTK_PIN_NO(75) | 4)
+#define PINMUX_GPIO75__FUNC_TP_GPIO15_AO (MTK_PIN_NO(75) | 5)
+#define PINMUX_GPIO75__FUNC_DAP_MD32_SWD (MTK_PIN_NO(75) | 7)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_AP_GOOD (MTK_PIN_NO(76) | 1)
+#define PINMUX_GPIO76__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(76) | 3)
+#define PINMUX_GPIO76__FUNC_GPS_PPS (MTK_PIN_NO(76) | 4)
+#define PINMUX_GPIO76__FUNC_PMSR_SMAP (MTK_PIN_NO(76) | 5)
+#define PINMUX_GPIO76__FUNC_AGPS_SYNC (MTK_PIN_NO(76) | 6)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_MSDC1_CLK (MTK_PIN_NO(77) | 1)
+#define PINMUX_GPIO77__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(77) | 2)
+#define PINMUX_GPIO77__FUNC_UDI_TCK (MTK_PIN_NO(77) | 3)
+#define PINMUX_GPIO77__FUNC_CONN_DSP_JCK (MTK_PIN_NO(77) | 4)
+#define PINMUX_GPIO77__FUNC_TSFDC_EN (MTK_PIN_NO(77) | 6)
+#define PINMUX_GPIO77__FUNC_SSPM_JTAG_TCK_VCORE (MTK_PIN_NO(77) | 7)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_MSDC1_CMD (MTK_PIN_NO(78) | 1)
+#define PINMUX_GPIO78__FUNC_CONN_WF_MCU_AICE_TMSC (MTK_PIN_NO(78) | 2)
+#define PINMUX_GPIO78__FUNC_UDI_TMS (MTK_PIN_NO(78) | 3)
+#define PINMUX_GPIO78__FUNC_CONN_DSP_JMS (MTK_PIN_NO(78) | 4)
+#define PINMUX_GPIO78__FUNC_TSFDC_VCO_RST (MTK_PIN_NO(78) | 6)
+#define PINMUX_GPIO78__FUNC_SSPM_JTAG_TMS_VCORE (MTK_PIN_NO(78) | 7)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_MSDC1_DAT0 (MTK_PIN_NO(79) | 1)
+#define PINMUX_GPIO79__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(79) | 2)
+#define PINMUX_GPIO79__FUNC_UDI_TDI (MTK_PIN_NO(79) | 3)
+#define PINMUX_GPIO79__FUNC_CONN_DSP_JDI (MTK_PIN_NO(79) | 4)
+#define PINMUX_GPIO79__FUNC_TSFDC_TSSEL2 (MTK_PIN_NO(79) | 6)
+#define PINMUX_GPIO79__FUNC_SSPM_JTAG_TDI_VCORE (MTK_PIN_NO(79) | 7)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_MSDC1_DAT1 (MTK_PIN_NO(80) | 1)
+#define PINMUX_GPIO80__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(80) | 2)
+#define PINMUX_GPIO80__FUNC_UDI_TDO (MTK_PIN_NO(80) | 3)
+#define PINMUX_GPIO80__FUNC_CONN_DSP_JDO (MTK_PIN_NO(80) | 4)
+#define PINMUX_GPIO80__FUNC_TSFDC_TSSEL1 (MTK_PIN_NO(80) | 6)
+#define PINMUX_GPIO80__FUNC_SSPM_JTAG_TDO_VCORE (MTK_PIN_NO(80) | 7)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_MSDC1_DAT2 (MTK_PIN_NO(81) | 1)
+#define PINMUX_GPIO81__FUNC_CONN_WF_MCU_AICE_TCKC (MTK_PIN_NO(81) | 2)
+#define PINMUX_GPIO81__FUNC_UDI_NTRST (MTK_PIN_NO(81) | 3)
+#define PINMUX_GPIO81__FUNC_CONN_BGF_MCU_AICE_TCKC (MTK_PIN_NO(81) | 4)
+#define PINMUX_GPIO81__FUNC_MIPI3_D_SDATA (MTK_PIN_NO(81) | 5)
+#define PINMUX_GPIO81__FUNC_TSFDC_TSSEL0 (MTK_PIN_NO(81) | 6)
+#define PINMUX_GPIO81__FUNC_SSPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(81) | 7)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_MSDC1_DAT3 (MTK_PIN_NO(82) | 1)
+#define PINMUX_GPIO82__FUNC_CONN_BGF_MCU_AICE_TMSC (MTK_PIN_NO(82) | 3)
+#define PINMUX_GPIO82__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(82) | 4)
+#define PINMUX_GPIO82__FUNC_MIPI3_D_SCLK (MTK_PIN_NO(82) | 5)
+#define PINMUX_GPIO82__FUNC_TSFDC_RCK_SELB (MTK_PIN_NO(82) | 6)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(83) | 1)
+#define PINMUX_GPIO83__FUNC_TSFDC_26M (MTK_PIN_NO(83) | 6)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(84) | 1)
+#define PINMUX_GPIO84__FUNC_SPM_JTAG_TCK_VCORE (MTK_PIN_NO(84) | 3)
+#define PINMUX_GPIO84__FUNC_APU_JTAG_TCK (MTK_PIN_NO(84) | 4)
+#define PINMUX_GPIO84__FUNC_TSFDC_SDO (MTK_PIN_NO(84) | 6)
+#define PINMUX_GPIO84__FUNC_CONN_DSP_L5_JCK (MTK_PIN_NO(84) | 7)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(85) | 1)
+#define PINMUX_GPIO85__FUNC_SPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(85) | 3)
+#define PINMUX_GPIO85__FUNC_APU_JTAG_TRST (MTK_PIN_NO(85) | 4)
+#define PINMUX_GPIO85__FUNC_TSFDC_FOUT (MTK_PIN_NO(85) | 6)
+#define PINMUX_GPIO85__FUNC_CONN_DSP_L5_JINTP (MTK_PIN_NO(85) | 7)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(86) | 1)
+#define PINMUX_GPIO86__FUNC_SPM_JTAG_TDI_VCORE (MTK_PIN_NO(86) | 3)
+#define PINMUX_GPIO86__FUNC_APU_JTAG_TDI (MTK_PIN_NO(86) | 4)
+#define PINMUX_GPIO86__FUNC_TSFDC_SCK (MTK_PIN_NO(86) | 6)
+#define PINMUX_GPIO86__FUNC_CONN_DSP_L5_JDI (MTK_PIN_NO(86) | 7)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(87) | 1)
+#define PINMUX_GPIO87__FUNC_SPM_JTAG_TMS_VCORE (MTK_PIN_NO(87) | 3)
+#define PINMUX_GPIO87__FUNC_APU_JTAG_TMS (MTK_PIN_NO(87) | 4)
+#define PINMUX_GPIO87__FUNC_TSFDC_SDI (MTK_PIN_NO(87) | 6)
+#define PINMUX_GPIO87__FUNC_CONN_DSP_L5_JMS (MTK_PIN_NO(87) | 7)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(88) | 1)
+#define PINMUX_GPIO88__FUNC_SPM_JTAG_TDO_VCORE (MTK_PIN_NO(88) | 3)
+#define PINMUX_GPIO88__FUNC_APU_JTAG_TDO (MTK_PIN_NO(88) | 4)
+#define PINMUX_GPIO88__FUNC_TSFDC_SCF (MTK_PIN_NO(88) | 6)
+#define PINMUX_GPIO88__FUNC_CONN_DSP_L5_JDO (MTK_PIN_NO(88) | 7)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_DSI_TE (MTK_PIN_NO(89) | 1)
+#define PINMUX_GPIO89__FUNC_DBG_MON_B8 (MTK_PIN_NO(89) | 7)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_LCM_RST (MTK_PIN_NO(90) | 1)
+#define PINMUX_GPIO90__FUNC_DBG_MON_B9 (MTK_PIN_NO(90) | 7)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_DISP_PWM (MTK_PIN_NO(91) | 1)
+#define PINMUX_GPIO91__FUNC_DBG_MON_B10 (MTK_PIN_NO(91) | 7)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_CMMCLK0 (MTK_PIN_NO(92) | 1)
+#define PINMUX_GPIO92__FUNC_DBG_MON_A23 (MTK_PIN_NO(92) | 7)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_CMMCLK1 (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_DBG_MON_A24 (MTK_PIN_NO(93) | 7)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_CMMCLK2 (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_DBG_MON_A25 (MTK_PIN_NO(94) | 7)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_CMMCLK3 (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_MD32_1_TXD (MTK_PIN_NO(95) | 5)
+#define PINMUX_GPIO95__FUNC_PTA_TXD (MTK_PIN_NO(95) | 6)
+#define PINMUX_GPIO95__FUNC_DBG_MON_A26 (MTK_PIN_NO(95) | 7)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_CMMCLK4 (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_MD32_1_RXD (MTK_PIN_NO(96) | 5)
+#define PINMUX_GPIO96__FUNC_PTA_RXD (MTK_PIN_NO(96) | 6)
+#define PINMUX_GPIO96__FUNC_DBG_MON_A27 (MTK_PIN_NO(96) | 7)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(97) | 1)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_DIGRF_IRQ (MTK_PIN_NO(98) | 1)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_BPI_BUS0 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_MFG_TSFDC_EN (MTK_PIN_NO(99) | 4)
+#define PINMUX_GPIO99__FUNC_ANT_SEL0 (MTK_PIN_NO(99) | 6)
+#define PINMUX_GPIO99__FUNC_DBG_MON_B11 (MTK_PIN_NO(99) | 7)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_BPI_BUS1 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_MFG_TSFDC_VCO_RST (MTK_PIN_NO(100) | 4)
+#define PINMUX_GPIO100__FUNC_ANT_SEL1 (MTK_PIN_NO(100) | 6)
+#define PINMUX_GPIO100__FUNC_DBG_MON_B12 (MTK_PIN_NO(100) | 7)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_BPI_BUS2 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_DMIC1_CLK (MTK_PIN_NO(101) | 3)
+#define PINMUX_GPIO101__FUNC_MFG_TSFDC_TSSEL2 (MTK_PIN_NO(101) | 4)
+#define PINMUX_GPIO101__FUNC_ANT_SEL2 (MTK_PIN_NO(101) | 6)
+#define PINMUX_GPIO101__FUNC_DBG_MON_B13 (MTK_PIN_NO(101) | 7)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_BPI_BUS3 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_DMIC1_DAT (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_MFG_TSFDC_TSSEL1 (MTK_PIN_NO(102) | 4)
+#define PINMUX_GPIO102__FUNC_ANT_SEL3 (MTK_PIN_NO(102) | 6)
+#define PINMUX_GPIO102__FUNC_DBG_MON_B14 (MTK_PIN_NO(102) | 7)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_BPI_BUS4 (MTK_PIN_NO(103) | 1)
+#define PINMUX_GPIO103__FUNC_MFG_TSFDC_TSSEL0 (MTK_PIN_NO(103) | 4)
+#define PINMUX_GPIO103__FUNC_ANT_SEL4 (MTK_PIN_NO(103) | 6)
+#define PINMUX_GPIO103__FUNC_DBG_MON_B15 (MTK_PIN_NO(103) | 7)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_BPI_BUS5 (MTK_PIN_NO(104) | 1)
+#define PINMUX_GPIO104__FUNC_MFG_TSFDC_RCK_SELB (MTK_PIN_NO(104) | 4)
+#define PINMUX_GPIO104__FUNC_ANT_SEL5 (MTK_PIN_NO(104) | 6)
+#define PINMUX_GPIO104__FUNC_DBG_MON_B16 (MTK_PIN_NO(104) | 7)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_BPI_BUS6 (MTK_PIN_NO(105) | 1)
+#define PINMUX_GPIO105__FUNC_CONN_BPI_BUS6 (MTK_PIN_NO(105) | 2)
+#define PINMUX_GPIO105__FUNC_ANT_SEL6 (MTK_PIN_NO(105) | 6)
+#define PINMUX_GPIO105__FUNC_DBG_MON_B17 (MTK_PIN_NO(105) | 7)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_BPI_BUS7 (MTK_PIN_NO(106) | 1)
+#define PINMUX_GPIO106__FUNC_CONN_BPI_BUS7 (MTK_PIN_NO(106) | 2)
+#define PINMUX_GPIO106__FUNC_MFG_TSFDC_SDO (MTK_PIN_NO(106) | 4)
+#define PINMUX_GPIO106__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(106) | 5)
+#define PINMUX_GPIO106__FUNC_ANT_SEL7 (MTK_PIN_NO(106) | 6)
+#define PINMUX_GPIO106__FUNC_DBG_MON_B18 (MTK_PIN_NO(106) | 7)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_BPI_BUS8 (MTK_PIN_NO(107) | 1)
+#define PINMUX_GPIO107__FUNC_CONN_BPI_BUS8 (MTK_PIN_NO(107) | 2)
+#define PINMUX_GPIO107__FUNC_MFG_TSFDC_FOUT (MTK_PIN_NO(107) | 4)
+#define PINMUX_GPIO107__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(107) | 5)
+#define PINMUX_GPIO107__FUNC_ANT_SEL8 (MTK_PIN_NO(107) | 6)
+#define PINMUX_GPIO107__FUNC_DBG_MON_B19 (MTK_PIN_NO(107) | 7)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_BPI_BUS9 (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_CONN_BPI_BUS9 (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_I2SOUT4_DATA1 (MTK_PIN_NO(108) | 5)
+#define PINMUX_GPIO108__FUNC_ANT_SEL9 (MTK_PIN_NO(108) | 6)
+#define PINMUX_GPIO108__FUNC_DBG_MON_B20 (MTK_PIN_NO(108) | 7)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_BPI_BUS10 (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_CONN_BPI_BUS10 (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_I2SOUT4_DATA2 (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_ANT_SEL10 (MTK_PIN_NO(109) | 6)
+#define PINMUX_GPIO109__FUNC_DBG_MON_B21 (MTK_PIN_NO(109) | 7)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_BPI_BUS11 (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_CONN_BPI_BUS11_OLAT0 (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_I2SOUT4_DATA3 (MTK_PIN_NO(110) | 5)
+#define PINMUX_GPIO110__FUNC_ANT_SEL11 (MTK_PIN_NO(110) | 6)
+#define PINMUX_GPIO110__FUNC_DBG_MON_B22 (MTK_PIN_NO(110) | 7)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_BPI_BUS12 (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_CONN_BPI_BUS12_OLAT1 (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_CLKM0 (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_I2SIN4_BCK (MTK_PIN_NO(111) | 5)
+#define PINMUX_GPIO111__FUNC_ANT_SEL12 (MTK_PIN_NO(111) | 6)
+#define PINMUX_GPIO111__FUNC_DBG_MON_B23 (MTK_PIN_NO(111) | 7)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_BPI_BUS13 (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_CONN_BPI_BUS13_OLAT2 (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_CLKM1 (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(112) | 5)
+#define PINMUX_GPIO112__FUNC_ANT_SEL13 (MTK_PIN_NO(112) | 6)
+#define PINMUX_GPIO112__FUNC_DBG_MON_B24 (MTK_PIN_NO(112) | 7)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_BPI_BUS14 (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_CONN_BPI_BUS14_OLAT3 (MTK_PIN_NO(113) | 2)
+#define PINMUX_GPIO113__FUNC_CLKM2 (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_I2SIN4_DATA1 (MTK_PIN_NO(113) | 5)
+#define PINMUX_GPIO113__FUNC_ANT_SEL14 (MTK_PIN_NO(113) | 6)
+#define PINMUX_GPIO113__FUNC_DBG_MON_B25 (MTK_PIN_NO(113) | 7)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_BPI_BUS15 (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_CONN_BPI_BUS15_OLAT4 (MTK_PIN_NO(114) | 2)
+#define PINMUX_GPIO114__FUNC_CLKM3 (MTK_PIN_NO(114) | 3)
+#define PINMUX_GPIO114__FUNC_I2SIN4_DATA2 (MTK_PIN_NO(114) | 5)
+#define PINMUX_GPIO114__FUNC_ANT_SEL15 (MTK_PIN_NO(114) | 6)
+#define PINMUX_GPIO114__FUNC_DBG_MON_B26 (MTK_PIN_NO(114) | 7)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_BPI_BUS16 (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_CONN_BPI_BUS16_OLAT5 (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_I2SIN4_DATA3 (MTK_PIN_NO(115) | 5)
+#define PINMUX_GPIO115__FUNC_ANT_SEL16 (MTK_PIN_NO(115) | 6)
+#define PINMUX_GPIO115__FUNC_DBG_MON_B27 (MTK_PIN_NO(115) | 7)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_BPI_BUS17 (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_CONN_BPI_BUS17_ANT0 (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_I2SIN4_LRCK (MTK_PIN_NO(116) | 5)
+#define PINMUX_GPIO116__FUNC_ANT_SEL17 (MTK_PIN_NO(116) | 6)
+#define PINMUX_GPIO116__FUNC_DBG_MON_B28 (MTK_PIN_NO(116) | 7)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_CONN_MIPI0_SCLK (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_BPI_BUS18 (MTK_PIN_NO(117) | 3)
+#define PINMUX_GPIO117__FUNC_ANT_SEL18 (MTK_PIN_NO(117) | 6)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_CONN_MIPI0_SDATA (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_BPI_BUS19 (MTK_PIN_NO(118) | 3)
+#define PINMUX_GPIO118__FUNC_ANT_SEL19 (MTK_PIN_NO(118) | 6)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(119) | 1)
+#define PINMUX_GPIO119__FUNC_CONN_MIPI1_SCLK (MTK_PIN_NO(119) | 2)
+#define PINMUX_GPIO119__FUNC_BPI_BUS20 (MTK_PIN_NO(119) | 3)
+#define PINMUX_GPIO119__FUNC_ANT_SEL20 (MTK_PIN_NO(119) | 6)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(120) | 1)
+#define PINMUX_GPIO120__FUNC_CONN_MIPI1_SDATA (MTK_PIN_NO(120) | 2)
+#define PINMUX_GPIO120__FUNC_BPI_BUS21 (MTK_PIN_NO(120) | 3)
+#define PINMUX_GPIO120__FUNC_ANT_SEL21 (MTK_PIN_NO(120) | 6)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(121) | 1)
+#define PINMUX_GPIO121__FUNC_MIPI4_D_SCLK (MTK_PIN_NO(121) | 2)
+#define PINMUX_GPIO121__FUNC_BPI_BUS22 (MTK_PIN_NO(121) | 3)
+#define PINMUX_GPIO121__FUNC_MD_GPS_L1_BLANK (MTK_PIN_NO(121) | 6)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(122) | 1)
+#define PINMUX_GPIO122__FUNC_MIPI4_D_SDATA (MTK_PIN_NO(122) | 2)
+#define PINMUX_GPIO122__FUNC_BPI_BUS23 (MTK_PIN_NO(122) | 3)
+#define PINMUX_GPIO122__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(122) | 6)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_MIPI_M_SCLK (MTK_PIN_NO(123) | 1)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_MIPI_M_SDATA (MTK_PIN_NO(124) | 1)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_SCL0 (MTK_PIN_NO(125) | 1)
+#define PINMUX_GPIO125__FUNC_SCP_SCL4 (MTK_PIN_NO(125) | 2)
+#define PINMUX_GPIO125__FUNC_TP_UTXD2_VLP (MTK_PIN_NO(125) | 3)
+#define PINMUX_GPIO125__FUNC_TP_UCTS1_VLP (MTK_PIN_NO(125) | 4)
+#define PINMUX_GPIO125__FUNC_TP_GPIO4_AO (MTK_PIN_NO(125) | 5)
+#define PINMUX_GPIO125__FUNC_UTXD2 (MTK_PIN_NO(125) | 6)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_SDA0 (MTK_PIN_NO(126) | 1)
+#define PINMUX_GPIO126__FUNC_SCP_SDA4 (MTK_PIN_NO(126) | 2)
+#define PINMUX_GPIO126__FUNC_TP_URXD2_VLP (MTK_PIN_NO(126) | 3)
+#define PINMUX_GPIO126__FUNC_TP_URTS1_VLP (MTK_PIN_NO(126) | 4)
+#define PINMUX_GPIO126__FUNC_TP_GPIO5_AO (MTK_PIN_NO(126) | 5)
+#define PINMUX_GPIO126__FUNC_URXD2 (MTK_PIN_NO(126) | 6)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_SCL1 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_SCP_SCL5 (MTK_PIN_NO(127) | 2)
+#define PINMUX_GPIO127__FUNC_TP_UCTS2_VLP (MTK_PIN_NO(127) | 3)
+#define PINMUX_GPIO127__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(127) | 4)
+#define PINMUX_GPIO127__FUNC_TP_GPIO6_AO (MTK_PIN_NO(127) | 5)
+#define PINMUX_GPIO127__FUNC_MD_MCIF_UTXD0 (MTK_PIN_NO(127) | 6)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_SDA1 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_SCP_SDA5 (MTK_PIN_NO(128) | 2)
+#define PINMUX_GPIO128__FUNC_TP_URTS2_VLP (MTK_PIN_NO(128) | 3)
+#define PINMUX_GPIO128__FUNC_TP_URXD1_VLP (MTK_PIN_NO(128) | 4)
+#define PINMUX_GPIO128__FUNC_TP_GPIO7_AO (MTK_PIN_NO(128) | 5)
+#define PINMUX_GPIO128__FUNC_MD_MCIF_URXD0 (MTK_PIN_NO(128) | 6)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_SCL2 (MTK_PIN_NO(129) | 1)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_SDA2 (MTK_PIN_NO(130) | 1)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_SCL3 (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_TP_UTXD2_VCORE (MTK_PIN_NO(131) | 3)
+#define PINMUX_GPIO131__FUNC_SSPM_UTXD_AO_VCORE (MTK_PIN_NO(131) | 6)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_SDA3 (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_TP_URXD2_VCORE (MTK_PIN_NO(132) | 3)
+#define PINMUX_GPIO132__FUNC_SSPM_URXD_AO_VCORE (MTK_PIN_NO(132) | 6)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_SCL4 (MTK_PIN_NO(133) | 1)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_SDA4 (MTK_PIN_NO(134) | 1)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_SCL5 (MTK_PIN_NO(135) | 1)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_SDA5 (MTK_PIN_NO(136) | 1)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_SCL6 (MTK_PIN_NO(137) | 1)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_SDA6 (MTK_PIN_NO(138) | 1)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_SCL7 (MTK_PIN_NO(139) | 1)
+#define PINMUX_GPIO139__FUNC_TP_UTXD1_VCORE (MTK_PIN_NO(139) | 3)
+#define PINMUX_GPIO139__FUNC_MD_UTXD0 (MTK_PIN_NO(139) | 4)
+#define PINMUX_GPIO139__FUNC_UTXD1 (MTK_PIN_NO(139) | 6)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_SDA7 (MTK_PIN_NO(140) | 1)
+#define PINMUX_GPIO140__FUNC_TP_URXD1_VCORE (MTK_PIN_NO(140) | 3)
+#define PINMUX_GPIO140__FUNC_MD_URXD0 (MTK_PIN_NO(140) | 4)
+#define PINMUX_GPIO140__FUNC_URXD1 (MTK_PIN_NO(140) | 6)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_SCL8 (MTK_PIN_NO(141) | 1)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_SDA8 (MTK_PIN_NO(142) | 1)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_SCL9 (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_HFRP_UTXD1 (MTK_PIN_NO(143) | 3)
+#define PINMUX_GPIO143__FUNC_CONN_BGF_MCU_AICE_TMSC (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_CONN_WF_MCU_AICE_TMSC (MTK_PIN_NO(143) | 5)
+#define PINMUX_GPIO143__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(143) | 7)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_SDA9 (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(144) | 2)
+#define PINMUX_GPIO144__FUNC_HFRP_URXD1 (MTK_PIN_NO(144) | 3)
+#define PINMUX_GPIO144__FUNC_CONN_BGF_MCU_AICE_TCKC (MTK_PIN_NO(144) | 4)
+#define PINMUX_GPIO144__FUNC_CONN_WF_MCU_AICE_TCKC (MTK_PIN_NO(144) | 5)
+#define PINMUX_GPIO144__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(144) | 7)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_SCL10 (MTK_PIN_NO(145) | 1)
+#define PINMUX_GPIO145__FUNC_SCP_SCL0 (MTK_PIN_NO(145) | 2)
+#define PINMUX_GPIO145__FUNC_TP_GPIO8_AO (MTK_PIN_NO(145) | 5)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_SDA10 (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_SCP_SDA0 (MTK_PIN_NO(146) | 2)
+#define PINMUX_GPIO146__FUNC_TP_GPIO9_AO (MTK_PIN_NO(146) | 5)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_SCL11 (MTK_PIN_NO(147) | 1)
+#define PINMUX_GPIO147__FUNC_SCP_SCL1 (MTK_PIN_NO(147) | 2)
+#define PINMUX_GPIO147__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(147) | 3)
+#define PINMUX_GPIO147__FUNC_DMIC_CLK (MTK_PIN_NO(147) | 4)
+#define PINMUX_GPIO147__FUNC_TP_GPIO10_AO (MTK_PIN_NO(147) | 5)
+#define PINMUX_GPIO147__FUNC_EXTIF0_PRI (MTK_PIN_NO(147) | 6)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_SDA11 (MTK_PIN_NO(148) | 1)
+#define PINMUX_GPIO148__FUNC_SCP_SDA1 (MTK_PIN_NO(148) | 2)
+#define PINMUX_GPIO148__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(148) | 3)
+#define PINMUX_GPIO148__FUNC_DMIC_DAT (MTK_PIN_NO(148) | 4)
+#define PINMUX_GPIO148__FUNC_TP_GPIO11_AO (MTK_PIN_NO(148) | 5)
+#define PINMUX_GPIO148__FUNC_EXTIF0_GNT_B (MTK_PIN_NO(148) | 6)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_KPROW2 (MTK_PIN_NO(149) | 1)
+#define PINMUX_GPIO149__FUNC_PWM_VLP (MTK_PIN_NO(149) | 2)
+#define PINMUX_GPIO149__FUNC_MD_INT0 (MTK_PIN_NO(149) | 4)
+#define PINMUX_GPIO149__FUNC_TP_GPIO12_AO (MTK_PIN_NO(149) | 5)
+#define PINMUX_GPIO149__FUNC_SCL0 (MTK_PIN_NO(149) | 6)
+#define PINMUX_GPIO149__FUNC_DBG_MON_A28 (MTK_PIN_NO(149) | 7)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_KPCOL2 (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_PWM_VLP (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_CMMCLK5 (MTK_PIN_NO(150) | 3)
+#define PINMUX_GPIO150__FUNC_MD_INT3 (MTK_PIN_NO(150) | 4)
+#define PINMUX_GPIO150__FUNC_TP_GPIO13_AO (MTK_PIN_NO(150) | 5)
+#define PINMUX_GPIO150__FUNC_SDA0 (MTK_PIN_NO(150) | 6)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_SRCLKENAI0 (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_MD_INT4 (MTK_PIN_NO(151) | 4)
+#define PINMUX_GPIO151__FUNC_TP_GPIO14_AO (MTK_PIN_NO(151) | 5)
+#define PINMUX_GPIO151__FUNC_DBG_MON_A29 (MTK_PIN_NO(151) | 7)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_SRCLKENAI1 (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(152) | 4)
+#define PINMUX_GPIO152__FUNC_TP_GPIO15_AO (MTK_PIN_NO(152) | 5)
+#define PINMUX_GPIO152__FUNC_DBG_MON_A30 (MTK_PIN_NO(152) | 7)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_DISP_PWM1 (MTK_PIN_NO(153) | 2)
+#define PINMUX_GPIO153__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(153) | 4)
+#define PINMUX_GPIO153__FUNC_DBG_MON_A0 (MTK_PIN_NO(153) | 7)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_LCM_RST1 (MTK_PIN_NO(154) | 2)
+#define PINMUX_GPIO154__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(154) | 3)
+#define PINMUX_GPIO154__FUNC_CMFLASH2 (MTK_PIN_NO(154) | 4)
+#define PINMUX_GPIO154__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(154) | 5)
+#define PINMUX_GPIO154__FUNC_DBG_MON_A1 (MTK_PIN_NO(154) | 7)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_DSI_TE1 (MTK_PIN_NO(155) | 2)
+#define PINMUX_GPIO155__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(155) | 3)
+#define PINMUX_GPIO155__FUNC_CMFLASH3 (MTK_PIN_NO(155) | 4)
+#define PINMUX_GPIO155__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(155) | 5)
+#define PINMUX_GPIO155__FUNC_DBG_MON_A2 (MTK_PIN_NO(155) | 7)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_SPMI_M_SCL (MTK_PIN_NO(156) | 1)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_SPMI_M_SDA (MTK_PIN_NO(157) | 1)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_SPMI_P_SCL (MTK_PIN_NO(158) | 1)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_SPMI_P_SDA (MTK_PIN_NO(159) | 1)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_SRCLKENA0 (MTK_PIN_NO(160) | 1)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(161) | 1)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_RTC32K_CK (MTK_PIN_NO(162) | 1)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_WATCHDOG (MTK_PIN_NO(163) | 1)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(164) | 1)
+#define PINMUX_GPIO164__FUNC_AUD_CLK_MOSI_A (MTK_PIN_NO(164) | 3)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(165) | 1)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(166) | 1)
+#define PINMUX_GPIO166__FUNC_AUD_DAT_MOSI0_A (MTK_PIN_NO(166) | 3)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_AUD_DAT_MOSI1_A (MTK_PIN_NO(167) | 3)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_AUD_NLE_MOSI0 (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(168) | 2)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_AUD_NLE_MOSI1 (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_AUD_CLK_MISO (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_AUD_CLK_MISO_A (MTK_PIN_NO(169) | 3)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(170) | 1)
+#define PINMUX_GPIO170__FUNC_VOW_DAT_MISO (MTK_PIN_NO(170) | 2)
+#define PINMUX_GPIO170__FUNC_AUD_DAT_MISO0_A (MTK_PIN_NO(170) | 3)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(171) | 1)
+#define PINMUX_GPIO171__FUNC_VOW_CLK_MISO (MTK_PIN_NO(171) | 2)
+#define PINMUX_GPIO171__FUNC_AUD_DAT_MISO1_A (MTK_PIN_NO(171) | 3)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_CONN_TOP_CLK (MTK_PIN_NO(172) | 1)
+#define PINMUX_GPIO172__FUNC_DBG_MON_A31 (MTK_PIN_NO(172) | 7)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_CONN_TOP_DATA (MTK_PIN_NO(173) | 1)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_CONN_BT_CLK (MTK_PIN_NO(174) | 1)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_CONN_BT_DATA (MTK_PIN_NO(175) | 1)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define PINMUX_GPIO176__FUNC_CONN_HRST_B (MTK_PIN_NO(176) | 1)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define PINMUX_GPIO177__FUNC_CONN_WB_PTA (MTK_PIN_NO(177) | 1)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define PINMUX_GPIO178__FUNC_CONN_WF_CTRL0 (MTK_PIN_NO(178) | 1)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define PINMUX_GPIO179__FUNC_CONN_WF_CTRL1 (MTK_PIN_NO(179) | 1)
+
+#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define PINMUX_GPIO180__FUNC_CONN_WF_CTRL2 (MTK_PIN_NO(180) | 1)
+
+#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define PINMUX_GPIO181__FUNC_CONN_WF_CTRL3 (MTK_PIN_NO(181) | 1)
+#define PINMUX_GPIO181__FUNC_CONN_TOP_CLK_2 (MTK_PIN_NO(181) | 2)
+#define PINMUX_GPIO181__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(181) | 3)
+
+#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define PINMUX_GPIO182__FUNC_CONN_WF_CTRL4 (MTK_PIN_NO(182) | 1)
+#define PINMUX_GPIO182__FUNC_CONN_TOP_DATA_2 (MTK_PIN_NO(182) | 2)
+#define PINMUX_GPIO182__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(182) | 3)
+
+#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define PINMUX_GPIO183__FUNC_CONN_HRST_B_2 (MTK_PIN_NO(183) | 1)
+
+#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define PINMUX_GPIO184__FUNC_MSDC0_DSL (MTK_PIN_NO(184) | 1)
+#define PINMUX_GPIO184__FUNC_ANT_SEL13 (MTK_PIN_NO(184) | 3)
+
+#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define PINMUX_GPIO185__FUNC_MSDC0_CLK (MTK_PIN_NO(185) | 1)
+#define PINMUX_GPIO185__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(185) | 2)
+#define PINMUX_GPIO185__FUNC_ANT_SEL14 (MTK_PIN_NO(185) | 3)
+
+#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define PINMUX_GPIO186__FUNC_MSDC0_CMD (MTK_PIN_NO(186) | 1)
+#define PINMUX_GPIO186__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(186) | 2)
+#define PINMUX_GPIO186__FUNC_ANT_SEL15 (MTK_PIN_NO(186) | 3)
+#define PINMUX_GPIO186__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(186) | 5)
+
+#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define PINMUX_GPIO187__FUNC_MSDC0_RSTB (MTK_PIN_NO(187) | 1)
+#define PINMUX_GPIO187__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(187) | 2)
+#define PINMUX_GPIO187__FUNC_ANT_SEL16 (MTK_PIN_NO(187) | 3)
+#define PINMUX_GPIO187__FUNC_I2SOUT4_DATA1 (MTK_PIN_NO(187) | 5)
+
+#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define PINMUX_GPIO188__FUNC_MSDC0_DAT0 (MTK_PIN_NO(188) | 1)
+#define PINMUX_GPIO188__FUNC_ANT_SEL17 (MTK_PIN_NO(188) | 3)
+#define PINMUX_GPIO188__FUNC_I2SOUT4_DATA2 (MTK_PIN_NO(188) | 5)
+
+#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define PINMUX_GPIO189__FUNC_MSDC0_DAT1 (MTK_PIN_NO(189) | 1)
+#define PINMUX_GPIO189__FUNC_ANT_SEL18 (MTK_PIN_NO(189) | 3)
+#define PINMUX_GPIO189__FUNC_I2SOUT4_DATA3 (MTK_PIN_NO(189) | 5)
+
+#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define PINMUX_GPIO190__FUNC_MSDC0_DAT2 (MTK_PIN_NO(190) | 1)
+#define PINMUX_GPIO190__FUNC_DMIC1_CLK (MTK_PIN_NO(190) | 2)
+#define PINMUX_GPIO190__FUNC_ANT_SEL19 (MTK_PIN_NO(190) | 3)
+#define PINMUX_GPIO190__FUNC_I2SIN4_BCK (MTK_PIN_NO(190) | 5)
+
+#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define PINMUX_GPIO191__FUNC_MSDC0_DAT3 (MTK_PIN_NO(191) | 1)
+#define PINMUX_GPIO191__FUNC_DMIC1_DAT (MTK_PIN_NO(191) | 2)
+#define PINMUX_GPIO191__FUNC_ANT_SEL20 (MTK_PIN_NO(191) | 3)
+#define PINMUX_GPIO191__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(191) | 5)
+
+#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define PINMUX_GPIO192__FUNC_MSDC0_DAT4 (MTK_PIN_NO(192) | 1)
+#define PINMUX_GPIO192__FUNC_IDDIG (MTK_PIN_NO(192) | 2)
+#define PINMUX_GPIO192__FUNC_ANT_SEL21 (MTK_PIN_NO(192) | 3)
+#define PINMUX_GPIO192__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(192) | 4)
+#define PINMUX_GPIO192__FUNC_I2SIN4_DATA1 (MTK_PIN_NO(192) | 5)
+
+#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define PINMUX_GPIO193__FUNC_MSDC0_DAT5 (MTK_PIN_NO(193) | 1)
+#define PINMUX_GPIO193__FUNC_USB_DRVVBUS (MTK_PIN_NO(193) | 2)
+#define PINMUX_GPIO193__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(193) | 4)
+#define PINMUX_GPIO193__FUNC_I2SIN4_DATA2 (MTK_PIN_NO(193) | 5)
+
+#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define PINMUX_GPIO194__FUNC_MSDC0_DAT6 (MTK_PIN_NO(194) | 1)
+#define PINMUX_GPIO194__FUNC_VBUSVALID (MTK_PIN_NO(194) | 2)
+#define PINMUX_GPIO194__FUNC_I2SIN4_DATA3 (MTK_PIN_NO(194) | 5)
+
+#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define PINMUX_GPIO195__FUNC_MSDC0_DAT7 (MTK_PIN_NO(195) | 1)
+#define PINMUX_GPIO195__FUNC_I2SIN4_LRCK (MTK_PIN_NO(195) | 5)
+
+#endif /* __MT6878_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h
new file mode 100644
index 000000000000..982bc95c471c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6893-pinfunc.h
@@ -0,0 +1,1356 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Copyright (c) 2025 Collabora Ltd
+ */
+
+#ifndef __MT6893_PINFUNC_H
+#define __MT6893_PINFUNC_H
+
+#include "mt65xx.h"
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_SPI6_CLK (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_I2S5_MCK (MTK_PIN_NO(0) | 2)
+#define PINMUX_GPIO0__FUNC_PWM_0 (MTK_PIN_NO(0) | 3)
+#define PINMUX_GPIO0__FUNC_MD_INT0 (MTK_PIN_NO(0) | 4)
+#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 5)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_SPI6_CSB (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_I2S5_BCK (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_PWM_1 (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(1) | 4)
+#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 5)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_SPI6_MI (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_I2S5_LRCK (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_PWM_2 (MTK_PIN_NO(2) | 3)
+#define PINMUX_GPIO2__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(2) | 4)
+#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 5)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_SPI6_MO (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_I2S5_DO (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_PWM_3 (MTK_PIN_NO(3) | 3)
+#define PINMUX_GPIO3__FUNC_CLKM0 (MTK_PIN_NO(3) | 4)
+#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 5)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_SPI7_A_CLK (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_I2S2_MCK (MTK_PIN_NO(4) | 2)
+#define PINMUX_GPIO4__FUNC_DMIC1_CLK (MTK_PIN_NO(4) | 3)
+#define PINMUX_GPIO4__FUNC_PCM1_DI (MTK_PIN_NO(4) | 4)
+#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 5)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_SPI7_A_CSB (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_I2S2_BCK (MTK_PIN_NO(5) | 2)
+#define PINMUX_GPIO5__FUNC_DMIC1_DAT (MTK_PIN_NO(5) | 3)
+#define PINMUX_GPIO5__FUNC_PCM1_CLK (MTK_PIN_NO(5) | 4)
+#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 5)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_SPI7_A_MI (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_I2S2_LRCK (MTK_PIN_NO(6) | 2)
+#define PINMUX_GPIO6__FUNC_DMIC_CLK (MTK_PIN_NO(6) | 3)
+#define PINMUX_GPIO6__FUNC_PCM1_SYNC (MTK_PIN_NO(6) | 4)
+#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 5)
+#define PINMUX_GPIO6__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(6) | 6)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_SPI7_A_MO (MTK_PIN_NO(7) | 1)
+#define PINMUX_GPIO7__FUNC_I2S2_DI (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_DMIC_DAT (MTK_PIN_NO(7) | 3)
+#define PINMUX_GPIO7__FUNC_PCM1_DO0 (MTK_PIN_NO(7) | 4)
+#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 5)
+#define PINMUX_GPIO7__FUNC_WIFI_TXD (MTK_PIN_NO(7) | 6)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_SRCLKENAI1 (MTK_PIN_NO(8) | 1)
+#define PINMUX_GPIO8__FUNC_I2S2_DI2 (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_KPCOL2 (MTK_PIN_NO(8) | 3)
+#define PINMUX_GPIO8__FUNC_PCM1_DO1 (MTK_PIN_NO(8) | 4)
+#define PINMUX_GPIO8__FUNC_CLKM1 (MTK_PIN_NO(8) | 5)
+#define PINMUX_GPIO8__FUNC_CONN_BT_TXD (MTK_PIN_NO(8) | 6)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_SRCLKENAI0 (MTK_PIN_NO(9) | 1)
+#define PINMUX_GPIO9__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(9) | 2)
+#define PINMUX_GPIO9__FUNC_KPROW2 (MTK_PIN_NO(9) | 3)
+#define PINMUX_GPIO9__FUNC_PCM1_DO2 (MTK_PIN_NO(9) | 4)
+#define PINMUX_GPIO9__FUNC_CLKM3 (MTK_PIN_NO(9) | 5)
+#define PINMUX_GPIO9__FUNC_CMMCLK4 (MTK_PIN_NO(9) | 6)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_MSDC1_CLK_A (MTK_PIN_NO(10) | 1)
+#define PINMUX_GPIO10__FUNC_SPI4_B_CLK (MTK_PIN_NO(10) | 2)
+#define PINMUX_GPIO10__FUNC_I2S8_MCK (MTK_PIN_NO(10) | 3)
+#define PINMUX_GPIO10__FUNC_DSI1_TE (MTK_PIN_NO(10) | 4)
+#define PINMUX_GPIO10__FUNC_MD_INT0 (MTK_PIN_NO(10) | 5)
+#define PINMUX_GPIO10__FUNC_TP_GPIO0_AO (MTK_PIN_NO(10) | 6)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_MSDC1_CMD_A (MTK_PIN_NO(11) | 1)
+#define PINMUX_GPIO11__FUNC_SPI4_B_CSB (MTK_PIN_NO(11) | 2)
+#define PINMUX_GPIO11__FUNC_I2S8_BCK (MTK_PIN_NO(11) | 3)
+#define PINMUX_GPIO11__FUNC_LCM1_RST (MTK_PIN_NO(11) | 4)
+#define PINMUX_GPIO11__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(11) | 5)
+#define PINMUX_GPIO11__FUNC_TP_GPIO1_AO (MTK_PIN_NO(11) | 6)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_MSDC1_DAT3_A (MTK_PIN_NO(12) | 1)
+#define PINMUX_GPIO12__FUNC_SPI4_B_MI (MTK_PIN_NO(12) | 2)
+#define PINMUX_GPIO12__FUNC_I2S8_LRCK (MTK_PIN_NO(12) | 3)
+#define PINMUX_GPIO12__FUNC_DMIC1_CLK (MTK_PIN_NO(12) | 4)
+#define PINMUX_GPIO12__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(12) | 5)
+#define PINMUX_GPIO12__FUNC_TP_GPIO2_AO (MTK_PIN_NO(12) | 6)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_MSDC1_DAT0_A (MTK_PIN_NO(13) | 1)
+#define PINMUX_GPIO13__FUNC_SPI4_B_MO (MTK_PIN_NO(13) | 2)
+#define PINMUX_GPIO13__FUNC_I2S8_DI (MTK_PIN_NO(13) | 3)
+#define PINMUX_GPIO13__FUNC_DMIC1_DAT (MTK_PIN_NO(13) | 4)
+#define PINMUX_GPIO13__FUNC_ANT_SEL10 (MTK_PIN_NO(13) | 5)
+#define PINMUX_GPIO13__FUNC_TP_GPIO3_AO (MTK_PIN_NO(13) | 6)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_MSDC1_DAT2_A (MTK_PIN_NO(14) | 1)
+#define PINMUX_GPIO14__FUNC_SPI5_C_CLK (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_I2S9_MCK (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_IDDIG (MTK_PIN_NO(14) | 4)
+#define PINMUX_GPIO14__FUNC_ANT_SEL11 (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_TP_GPIO4_AO (MTK_PIN_NO(14) | 6)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_MSDC1_DAT1_A (MTK_PIN_NO(15) | 1)
+#define PINMUX_GPIO15__FUNC_SPI5_C_CSB (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_I2S9_BCK (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_USB_DRVVBUS (MTK_PIN_NO(15) | 4)
+#define PINMUX_GPIO15__FUNC_ANT_SEL12 (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_TP_GPIO5_AO (MTK_PIN_NO(15) | 6)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_SRCLKENAI1 (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_SPI5_C_MI (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_I2S9_LRCK (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_KPCOL2 (MTK_PIN_NO(16) | 4)
+#define PINMUX_GPIO16__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(16) | 5)
+#define PINMUX_GPIO16__FUNC_TP_GPIO6_AO (MTK_PIN_NO(16) | 6)
+#define PINMUX_GPIO16__FUNC_DBG_MON_A30 (MTK_PIN_NO(16) | 7)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_SRCLKENAI0 (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_SPI5_C_MO (MTK_PIN_NO(17) | 2)
+#define PINMUX_GPIO17__FUNC_I2S9_DO (MTK_PIN_NO(17) | 3)
+#define PINMUX_GPIO17__FUNC_KPROW2 (MTK_PIN_NO(17) | 4)
+#define PINMUX_GPIO17__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(17) | 5)
+#define PINMUX_GPIO17__FUNC_TP_GPIO7_AO (MTK_PIN_NO(17) | 6)
+#define PINMUX_GPIO17__FUNC_DBG_MON_A31 (MTK_PIN_NO(17) | 7)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_DP_TX_HPD (MTK_PIN_NO(18) | 1)
+#define PINMUX_GPIO18__FUNC_SPI4_C_MI (MTK_PIN_NO(18) | 2)
+#define PINMUX_GPIO18__FUNC_SPI1_B_MI (MTK_PIN_NO(18) | 3)
+#define PINMUX_GPIO18__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(18) | 4)
+#define PINMUX_GPIO18__FUNC_ANT_SEL10 (MTK_PIN_NO(18) | 5)
+#define PINMUX_GPIO18__FUNC_MD_INT0 (MTK_PIN_NO(18) | 6)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_SRCLKENAI1 (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_SPI4_C_MO (MTK_PIN_NO(19) | 2)
+#define PINMUX_GPIO19__FUNC_SPI1_B_MO (MTK_PIN_NO(19) | 3)
+#define PINMUX_GPIO19__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(19) | 4)
+#define PINMUX_GPIO19__FUNC_ANT_SEL11 (MTK_PIN_NO(19) | 5)
+#define PINMUX_GPIO19__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(19) | 6)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_SRCLKENAI0 (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_SPI4_C_CLK (MTK_PIN_NO(20) | 2)
+#define PINMUX_GPIO20__FUNC_SPI1_B_CLK (MTK_PIN_NO(20) | 3)
+#define PINMUX_GPIO20__FUNC_PWM_3 (MTK_PIN_NO(20) | 4)
+#define PINMUX_GPIO20__FUNC_ANT_SEL12 (MTK_PIN_NO(20) | 5)
+#define PINMUX_GPIO20__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(20) | 6)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_DP_TX_HPD (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_SPI4_C_CSB (MTK_PIN_NO(21) | 2)
+#define PINMUX_GPIO21__FUNC_SPI1_B_CSB (MTK_PIN_NO(21) | 3)
+#define PINMUX_GPIO21__FUNC_I2S7_MCK (MTK_PIN_NO(21) | 4)
+#define PINMUX_GPIO21__FUNC_I2S9_MCK (MTK_PIN_NO(21) | 5)
+#define PINMUX_GPIO21__FUNC_IDDIG (MTK_PIN_NO(21) | 6)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_LCM1_RST (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_SPI0_C_CLK (MTK_PIN_NO(22) | 2)
+#define PINMUX_GPIO22__FUNC_SPI7_B_CLK (MTK_PIN_NO(22) | 3)
+#define PINMUX_GPIO22__FUNC_I2S7_BCK (MTK_PIN_NO(22) | 4)
+#define PINMUX_GPIO22__FUNC_I2S9_BCK (MTK_PIN_NO(22) | 5)
+#define PINMUX_GPIO22__FUNC_SCL13 (MTK_PIN_NO(22) | 6)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_DSI1_TE (MTK_PIN_NO(23) | 1)
+#define PINMUX_GPIO23__FUNC_SPI0_C_CSB (MTK_PIN_NO(23) | 2)
+#define PINMUX_GPIO23__FUNC_SPI7_B_CSB (MTK_PIN_NO(23) | 3)
+#define PINMUX_GPIO23__FUNC_I2S7_LRCK (MTK_PIN_NO(23) | 4)
+#define PINMUX_GPIO23__FUNC_I2S9_LRCK (MTK_PIN_NO(23) | 5)
+#define PINMUX_GPIO23__FUNC_SDA13 (MTK_PIN_NO(23) | 6)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_SRCLKENAI1 (MTK_PIN_NO(24) | 1)
+#define PINMUX_GPIO24__FUNC_SPI0_C_MI (MTK_PIN_NO(24) | 2)
+#define PINMUX_GPIO24__FUNC_SPI7_B_MI (MTK_PIN_NO(24) | 3)
+#define PINMUX_GPIO24__FUNC_I2S6_DI (MTK_PIN_NO(24) | 4)
+#define PINMUX_GPIO24__FUNC_I2S8_DI (MTK_PIN_NO(24) | 5)
+#define PINMUX_GPIO24__FUNC_SCL_6306 (MTK_PIN_NO(24) | 6)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_SRCLKENAI0 (MTK_PIN_NO(25) | 1)
+#define PINMUX_GPIO25__FUNC_SPI0_C_MO (MTK_PIN_NO(25) | 2)
+#define PINMUX_GPIO25__FUNC_SPI7_B_MO (MTK_PIN_NO(25) | 3)
+#define PINMUX_GPIO25__FUNC_I2S7_DO (MTK_PIN_NO(25) | 4)
+#define PINMUX_GPIO25__FUNC_I2S9_DO (MTK_PIN_NO(25) | 5)
+#define PINMUX_GPIO25__FUNC_SDA_6306 (MTK_PIN_NO(25) | 6)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_PWM_2 (MTK_PIN_NO(26) | 1)
+#define PINMUX_GPIO26__FUNC_CLKM0 (MTK_PIN_NO(26) | 2)
+#define PINMUX_GPIO26__FUNC_USB_DRVVBUS (MTK_PIN_NO(26) | 3)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_PWM_3 (MTK_PIN_NO(27) | 1)
+#define PINMUX_GPIO27__FUNC_CLKM1 (MTK_PIN_NO(27) | 2)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_PWM_0 (MTK_PIN_NO(28) | 1)
+#define PINMUX_GPIO28__FUNC_CLKM2 (MTK_PIN_NO(28) | 2)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_PWM_1 (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_CLKM3 (MTK_PIN_NO(29) | 2)
+#define PINMUX_GPIO29__FUNC_DSI1_TE (MTK_PIN_NO(29) | 3)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_PWM_2 (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_CLKM0 (MTK_PIN_NO(30) | 2)
+#define PINMUX_GPIO30__FUNC_LCM1_RST (MTK_PIN_NO(30) | 3)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_I2S3_MCK (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_I2S1_MCK (MTK_PIN_NO(31) | 2)
+#define PINMUX_GPIO31__FUNC_I2S5_MCK (MTK_PIN_NO(31) | 3)
+#define PINMUX_GPIO31__FUNC_SRCLKENAI0 (MTK_PIN_NO(31) | 4)
+#define PINMUX_GPIO31__FUNC_I2S0_MCK (MTK_PIN_NO(31) | 5)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_I2S3_BCK (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_I2S1_BCK (MTK_PIN_NO(32) | 2)
+#define PINMUX_GPIO32__FUNC_I2S5_BCK (MTK_PIN_NO(32) | 3)
+#define PINMUX_GPIO32__FUNC_PCM0_CLK (MTK_PIN_NO(32) | 4)
+#define PINMUX_GPIO32__FUNC_I2S0_BCK (MTK_PIN_NO(32) | 5)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_I2S3_LRCK (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_I2S1_LRCK (MTK_PIN_NO(33) | 2)
+#define PINMUX_GPIO33__FUNC_I2S5_LRCK (MTK_PIN_NO(33) | 3)
+#define PINMUX_GPIO33__FUNC_PCM0_SYNC (MTK_PIN_NO(33) | 4)
+#define PINMUX_GPIO33__FUNC_I2S0_LRCK (MTK_PIN_NO(33) | 5)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_I2S0_DI (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_I2S2_DI (MTK_PIN_NO(34) | 2)
+#define PINMUX_GPIO34__FUNC_I2S2_DI2 (MTK_PIN_NO(34) | 3)
+#define PINMUX_GPIO34__FUNC_PCM0_DI (MTK_PIN_NO(34) | 4)
+#define PINMUX_GPIO34__FUNC_I2S0_DI_A (MTK_PIN_NO(34) | 5)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_I2S3_DO (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_I2S1_DO (MTK_PIN_NO(35) | 2)
+#define PINMUX_GPIO35__FUNC_I2S5_DO (MTK_PIN_NO(35) | 3)
+#define PINMUX_GPIO35__FUNC_PCM0_DO (MTK_PIN_NO(35) | 4)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_SPI5_A_CLK (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_DMIC1_CLK (MTK_PIN_NO(36) | 2)
+#define PINMUX_GPIO36__FUNC_IDDIG (MTK_PIN_NO(36) | 3)
+#define PINMUX_GPIO36__FUNC_MD_URXD0 (MTK_PIN_NO(36) | 4)
+#define PINMUX_GPIO36__FUNC_UCTS0 (MTK_PIN_NO(36) | 5)
+#define PINMUX_GPIO36__FUNC_URXD1 (MTK_PIN_NO(36) | 6)
+#define PINMUX_GPIO36__FUNC_DBG_MON_A0 (MTK_PIN_NO(36) | 7)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_SPI5_A_CSB (MTK_PIN_NO(37) | 1)
+#define PINMUX_GPIO37__FUNC_DMIC1_DAT (MTK_PIN_NO(37) | 2)
+#define PINMUX_GPIO37__FUNC_USB_DRVVBUS (MTK_PIN_NO(37) | 3)
+#define PINMUX_GPIO37__FUNC_MD_UTXD0 (MTK_PIN_NO(37) | 4)
+#define PINMUX_GPIO37__FUNC_URTS0 (MTK_PIN_NO(37) | 5)
+#define PINMUX_GPIO37__FUNC_UTXD1 (MTK_PIN_NO(37) | 6)
+#define PINMUX_GPIO37__FUNC_DBG_MON_A1 (MTK_PIN_NO(37) | 7)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_SPI5_A_MI (MTK_PIN_NO(38) | 1)
+#define PINMUX_GPIO38__FUNC_DMIC_CLK (MTK_PIN_NO(38) | 2)
+#define PINMUX_GPIO38__FUNC_DSI1_TE (MTK_PIN_NO(38) | 3)
+#define PINMUX_GPIO38__FUNC_MD_URXD1 (MTK_PIN_NO(38) | 4)
+#define PINMUX_GPIO38__FUNC_URXD0 (MTK_PIN_NO(38) | 5)
+#define PINMUX_GPIO38__FUNC_UCTS1 (MTK_PIN_NO(38) | 6)
+#define PINMUX_GPIO38__FUNC_DBG_MON_A2 (MTK_PIN_NO(38) | 7)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_SPI5_A_MO (MTK_PIN_NO(39) | 1)
+#define PINMUX_GPIO39__FUNC_DMIC_DAT (MTK_PIN_NO(39) | 2)
+#define PINMUX_GPIO39__FUNC_LCM1_RST (MTK_PIN_NO(39) | 3)
+#define PINMUX_GPIO39__FUNC_MD_UTXD1 (MTK_PIN_NO(39) | 4)
+#define PINMUX_GPIO39__FUNC_UTXD0 (MTK_PIN_NO(39) | 5)
+#define PINMUX_GPIO39__FUNC_URTS1 (MTK_PIN_NO(39) | 6)
+#define PINMUX_GPIO39__FUNC_DBG_MON_A3 (MTK_PIN_NO(39) | 7)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_DISP_PWM (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_DBG_MON_A6 (MTK_PIN_NO(40) | 7)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_DSI_TE (MTK_PIN_NO(41) | 1)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_LCM_RST (MTK_PIN_NO(42) | 1)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(43) | 1)
+#define PINMUX_GPIO43__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(43) | 2)
+#define PINMUX_GPIO43__FUNC_SCL_6306 (MTK_PIN_NO(43) | 3)
+#define PINMUX_GPIO43__FUNC_ADSP_URXD0 (MTK_PIN_NO(43) | 4)
+#define PINMUX_GPIO43__FUNC_PTA_RXD (MTK_PIN_NO(43) | 5)
+#define PINMUX_GPIO43__FUNC_SSPM_URXD_AO (MTK_PIN_NO(43) | 6)
+#define PINMUX_GPIO43__FUNC_DBG_MON_A4 (MTK_PIN_NO(43) | 7)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(44) | 1)
+#define PINMUX_GPIO44__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(44) | 2)
+#define PINMUX_GPIO44__FUNC_SDA_6306 (MTK_PIN_NO(44) | 3)
+#define PINMUX_GPIO44__FUNC_ADSP_UTXD0 (MTK_PIN_NO(44) | 4)
+#define PINMUX_GPIO44__FUNC_PTA_TXD (MTK_PIN_NO(44) | 5)
+#define PINMUX_GPIO44__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(44) | 6)
+#define PINMUX_GPIO44__FUNC_DBG_MON_A5 (MTK_PIN_NO(44) | 7)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(45) | 1)
+#define PINMUX_GPIO45__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(45) | 2)
+#define PINMUX_GPIO45__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(45) | 3)
+#define PINMUX_GPIO45__FUNC_APU_JTAG_TDI (MTK_PIN_NO(45) | 4)
+#define PINMUX_GPIO45__FUNC_CCU_JTAG_TDI (MTK_PIN_NO(45) | 5)
+#define PINMUX_GPIO45__FUNC_LVTS_SCK (MTK_PIN_NO(45) | 6)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(46) | 1)
+#define PINMUX_GPIO46__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(46) | 2)
+#define PINMUX_GPIO46__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(46) | 3)
+#define PINMUX_GPIO46__FUNC_APU_JTAG_TMS (MTK_PIN_NO(46) | 4)
+#define PINMUX_GPIO46__FUNC_CCU_JTAG_TMS (MTK_PIN_NO(46) | 5)
+#define PINMUX_GPIO46__FUNC_LVTS_SDI (MTK_PIN_NO(46) | 6)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(47) | 1)
+#define PINMUX_GPIO47__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(47) | 2)
+#define PINMUX_GPIO47__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(47) | 3)
+#define PINMUX_GPIO47__FUNC_APU_JTAG_TDO (MTK_PIN_NO(47) | 4)
+#define PINMUX_GPIO47__FUNC_CCU_JTAG_TDO (MTK_PIN_NO(47) | 5)
+#define PINMUX_GPIO47__FUNC_LVTS_SCF (MTK_PIN_NO(47) | 6)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(48) | 1)
+#define PINMUX_GPIO48__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(48) | 2)
+#define PINMUX_GPIO48__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(48) | 3)
+#define PINMUX_GPIO48__FUNC_APU_JTAG_TRST (MTK_PIN_NO(48) | 4)
+#define PINMUX_GPIO48__FUNC_CCU_JTAG_TRST (MTK_PIN_NO(48) | 5)
+#define PINMUX_GPIO48__FUNC_LVTS_FOUT (MTK_PIN_NO(48) | 6)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(49) | 1)
+#define PINMUX_GPIO49__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(49) | 2)
+#define PINMUX_GPIO49__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(49) | 3)
+#define PINMUX_GPIO49__FUNC_APU_JTAG_TCK (MTK_PIN_NO(49) | 4)
+#define PINMUX_GPIO49__FUNC_CCU_JTAG_TCK (MTK_PIN_NO(49) | 5)
+#define PINMUX_GPIO49__FUNC_LVTS_SDO (MTK_PIN_NO(49) | 6)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(50) | 1)
+#define PINMUX_GPIO50__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(50) | 2)
+#define PINMUX_GPIO50__FUNC_LVTS_26M (MTK_PIN_NO(50) | 6)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_MSDC1_CLK (MTK_PIN_NO(51) | 1)
+#define PINMUX_GPIO51__FUNC_PCM1_CLK (MTK_PIN_NO(51) | 2)
+#define PINMUX_GPIO51__FUNC_VPU_UDI_TCK (MTK_PIN_NO(51) | 3)
+#define PINMUX_GPIO51__FUNC_UDI_TCK (MTK_PIN_NO(51) | 4)
+#define PINMUX_GPIO51__FUNC_IPU_JTAG_TCK (MTK_PIN_NO(51) | 5)
+#define PINMUX_GPIO51__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(51) | 6)
+#define PINMUX_GPIO51__FUNC_JTCK_SEL3 (MTK_PIN_NO(51) | 7)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_MSDC1_CMD (MTK_PIN_NO(52) | 1)
+#define PINMUX_GPIO52__FUNC_PCM1_SYNC (MTK_PIN_NO(52) | 2)
+#define PINMUX_GPIO52__FUNC_VPU_UDI_TMS (MTK_PIN_NO(52) | 3)
+#define PINMUX_GPIO52__FUNC_UDI_TMS (MTK_PIN_NO(52) | 4)
+#define PINMUX_GPIO52__FUNC_IPU_JTAG_TMS (MTK_PIN_NO(52) | 5)
+#define PINMUX_GPIO52__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(52) | 6)
+#define PINMUX_GPIO52__FUNC_JTMS_SEL3 (MTK_PIN_NO(52) | 7)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_MSDC1_DAT3 (MTK_PIN_NO(53) | 1)
+#define PINMUX_GPIO53__FUNC_PCM1_DI (MTK_PIN_NO(53) | 2)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_MSDC1_DAT0 (MTK_PIN_NO(54) | 1)
+#define PINMUX_GPIO54__FUNC_PCM1_DO0 (MTK_PIN_NO(54) | 2)
+#define PINMUX_GPIO54__FUNC_VPU_UDI_TDI (MTK_PIN_NO(54) | 3)
+#define PINMUX_GPIO54__FUNC_UDI_TDI (MTK_PIN_NO(54) | 4)
+#define PINMUX_GPIO54__FUNC_IPU_JTAG_TDI (MTK_PIN_NO(54) | 5)
+#define PINMUX_GPIO54__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(54) | 6)
+#define PINMUX_GPIO54__FUNC_JTDI_SEL3 (MTK_PIN_NO(54) | 7)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_MSDC1_DAT2 (MTK_PIN_NO(55) | 1)
+#define PINMUX_GPIO55__FUNC_PCM1_DO2 (MTK_PIN_NO(55) | 2)
+#define PINMUX_GPIO55__FUNC_VPU_UDI_NTRST (MTK_PIN_NO(55) | 3)
+#define PINMUX_GPIO55__FUNC_UDI_NTRST (MTK_PIN_NO(55) | 4)
+#define PINMUX_GPIO55__FUNC_IPU_JTAG_TRST (MTK_PIN_NO(55) | 5)
+#define PINMUX_GPIO55__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(55) | 6)
+#define PINMUX_GPIO55__FUNC_JTRSTN_SEL3 (MTK_PIN_NO(55) | 7)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_MSDC1_DAT1 (MTK_PIN_NO(56) | 1)
+#define PINMUX_GPIO56__FUNC_PCM1_DO1 (MTK_PIN_NO(56) | 2)
+#define PINMUX_GPIO56__FUNC_VPU_UDI_TDO (MTK_PIN_NO(56) | 3)
+#define PINMUX_GPIO56__FUNC_UDI_TDO (MTK_PIN_NO(56) | 4)
+#define PINMUX_GPIO56__FUNC_IPU_JTAG_TDO (MTK_PIN_NO(56) | 5)
+#define PINMUX_GPIO56__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(56) | 6)
+#define PINMUX_GPIO56__FUNC_JTDO_SEL3 (MTK_PIN_NO(56) | 7)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(57) | 1)
+#define PINMUX_GPIO57__FUNC_DBG_MON_A14 (MTK_PIN_NO(57) | 7)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(58) | 1)
+#define PINMUX_GPIO58__FUNC_DBG_MON_A15 (MTK_PIN_NO(58) | 7)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_MIPI_M_SCLK (MTK_PIN_NO(59) | 1)
+#define PINMUX_GPIO59__FUNC_DBG_MON_A17 (MTK_PIN_NO(59) | 7)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_MIPI_M_SDATA (MTK_PIN_NO(60) | 1)
+#define PINMUX_GPIO60__FUNC_DBG_MON_A18 (MTK_PIN_NO(60) | 7)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(61) | 1)
+#define PINMUX_GPIO61__FUNC_DBG_MON_A16 (MTK_PIN_NO(61) | 7)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_DIGRF_IRQ (MTK_PIN_NO(62) | 1)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_BPI_BUS0 (MTK_PIN_NO(63) | 1)
+#define PINMUX_GPIO63__FUNC_DBG_MON_A19 (MTK_PIN_NO(63) | 7)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_BPI_BUS1 (MTK_PIN_NO(64) | 1)
+#define PINMUX_GPIO64__FUNC_DBG_MON_A20 (MTK_PIN_NO(64) | 7)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_BPI_BUS2 (MTK_PIN_NO(65) | 1)
+#define PINMUX_GPIO65__FUNC_DBG_MON_A21 (MTK_PIN_NO(65) | 7)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_BPI_BUS3 (MTK_PIN_NO(66) | 1)
+#define PINMUX_GPIO66__FUNC_DBG_MON_A22 (MTK_PIN_NO(66) | 7)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_BPI_BUS4 (MTK_PIN_NO(67) | 1)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_BPI_BUS5 (MTK_PIN_NO(68) | 1)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_BPI_BUS6 (MTK_PIN_NO(69) | 1)
+#define PINMUX_GPIO69__FUNC_CONN_BPI_BUS6 (MTK_PIN_NO(69) | 2)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_BPI_BUS7 (MTK_PIN_NO(70) | 1)
+#define PINMUX_GPIO70__FUNC_CONN_BPI_BUS7 (MTK_PIN_NO(70) | 2)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define PINMUX_GPIO71__FUNC_BPI_BUS8 (MTK_PIN_NO(71) | 1)
+#define PINMUX_GPIO71__FUNC_CONN_BPI_BUS8 (MTK_PIN_NO(71) | 2)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define PINMUX_GPIO72__FUNC_BPI_BUS9 (MTK_PIN_NO(72) | 1)
+#define PINMUX_GPIO72__FUNC_CONN_BPI_BUS9 (MTK_PIN_NO(72) | 2)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define PINMUX_GPIO73__FUNC_BPI_BUS10 (MTK_PIN_NO(73) | 1)
+#define PINMUX_GPIO73__FUNC_CONN_BPI_BUS10 (MTK_PIN_NO(73) | 2)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_BPI_BUS11_OLAT0 (MTK_PIN_NO(74) | 1)
+#define PINMUX_GPIO74__FUNC_CONN_BPI_BUS11_OLAT0 (MTK_PIN_NO(74) | 2)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_BPI_BUS12_OLAT1 (MTK_PIN_NO(75) | 1)
+#define PINMUX_GPIO75__FUNC_CONN_BPI_BUS12_OLAT1 (MTK_PIN_NO(75) | 2)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_BPI_BUS13_OLAT2 (MTK_PIN_NO(76) | 1)
+#define PINMUX_GPIO76__FUNC_CONN_BPI_BUS13_OLAT2 (MTK_PIN_NO(76) | 2)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_BPI_BUS14_OLAT3 (MTK_PIN_NO(77) | 1)
+#define PINMUX_GPIO77__FUNC_CONN_BPI_BUS14_OLAT3 (MTK_PIN_NO(77) | 2)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_BPI_BUS15_OLAT4 (MTK_PIN_NO(78) | 1)
+#define PINMUX_GPIO78__FUNC_CONN_BPI_BUS15_OLAT4 (MTK_PIN_NO(78) | 2)
+#define PINMUX_GPIO78__FUNC_DBG_MON_A7 (MTK_PIN_NO(78) | 7)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_BPI_BUS16_OLAT5 (MTK_PIN_NO(79) | 1)
+#define PINMUX_GPIO79__FUNC_CONN_BPI_BUS16_OLAT5 (MTK_PIN_NO(79) | 2)
+#define PINMUX_GPIO79__FUNC_DBG_MON_A8 (MTK_PIN_NO(79) | 7)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_BPI_BUS17_ANT0 (MTK_PIN_NO(80) | 1)
+#define PINMUX_GPIO80__FUNC_CONN_BPI_BUS17_ANT0 (MTK_PIN_NO(80) | 2)
+#define PINMUX_GPIO80__FUNC_DBG_MON_A9 (MTK_PIN_NO(80) | 7)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_BPI_BUS18_ANT1 (MTK_PIN_NO(81) | 1)
+#define PINMUX_GPIO81__FUNC_CONN_BPI_BUS18_ANT1 (MTK_PIN_NO(81) | 2)
+#define PINMUX_GPIO81__FUNC_DBG_MON_A10 (MTK_PIN_NO(81) | 7)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_BPI_BUS19_ANT2 (MTK_PIN_NO(82) | 1)
+#define PINMUX_GPIO82__FUNC_CONN_BPI_BUS19_ANT2 (MTK_PIN_NO(82) | 2)
+#define PINMUX_GPIO82__FUNC_DBG_MON_A11 (MTK_PIN_NO(82) | 7)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_BPI_BUS20_ANT3 (MTK_PIN_NO(83) | 1)
+#define PINMUX_GPIO83__FUNC_CONN_BPI_BUS20_ANT3 (MTK_PIN_NO(83) | 2)
+#define PINMUX_GPIO83__FUNC_DBG_MON_A12 (MTK_PIN_NO(83) | 7)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_BPI_BUS21_ANT4 (MTK_PIN_NO(84) | 1)
+#define PINMUX_GPIO84__FUNC_CONN_BPI_BUS21_ANT4 (MTK_PIN_NO(84) | 2)
+#define PINMUX_GPIO84__FUNC_DBG_MON_A13 (MTK_PIN_NO(84) | 7)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(85) | 1)
+#define PINMUX_GPIO85__FUNC_CONN_MIPI1_SCLK (MTK_PIN_NO(85) | 2)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(86) | 1)
+#define PINMUX_GPIO86__FUNC_CONN_MIPI1_SDATA (MTK_PIN_NO(86) | 2)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(87) | 1)
+#define PINMUX_GPIO87__FUNC_CONN_MIPI0_SCLK (MTK_PIN_NO(87) | 2)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(88) | 1)
+#define PINMUX_GPIO88__FUNC_CONN_MIPI0_SDATA (MTK_PIN_NO(88) | 2)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_SPMI_SCL (MTK_PIN_NO(89) | 1)
+#define PINMUX_GPIO89__FUNC_SCL10 (MTK_PIN_NO(89) | 2)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_SPMI_SDA (MTK_PIN_NO(90) | 1)
+#define PINMUX_GPIO90__FUNC_SDA10 (MTK_PIN_NO(90) | 2)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_AP_GOOD (MTK_PIN_NO(91) | 1)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_URXD0 (MTK_PIN_NO(92) | 1)
+#define PINMUX_GPIO92__FUNC_MD_URXD0 (MTK_PIN_NO(92) | 2)
+#define PINMUX_GPIO92__FUNC_MD_URXD1 (MTK_PIN_NO(92) | 3)
+#define PINMUX_GPIO92__FUNC_SSPM_URXD_AO (MTK_PIN_NO(92) | 4)
+#define PINMUX_GPIO92__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(92) | 5)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_UTXD0 (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_MD_UTXD0 (MTK_PIN_NO(93) | 2)
+#define PINMUX_GPIO93__FUNC_MD_UTXD1 (MTK_PIN_NO(93) | 3)
+#define PINMUX_GPIO93__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(93) | 4)
+#define PINMUX_GPIO93__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(93) | 5)
+#define PINMUX_GPIO93__FUNC_WIFI_TXD (MTK_PIN_NO(93) | 6)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_URXD1 (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_ADSP_URXD0 (MTK_PIN_NO(94) | 2)
+#define PINMUX_GPIO94__FUNC_MD32_0_RXD (MTK_PIN_NO(94) | 3)
+#define PINMUX_GPIO94__FUNC_SSPM_URXD_AO (MTK_PIN_NO(94) | 4)
+#define PINMUX_GPIO94__FUNC_TP_URXD1_AO (MTK_PIN_NO(94) | 5)
+#define PINMUX_GPIO94__FUNC_TP_URXD2_AO (MTK_PIN_NO(94) | 6)
+#define PINMUX_GPIO94__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(94) | 7)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_UTXD1 (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_ADSP_UTXD0 (MTK_PIN_NO(95) | 2)
+#define PINMUX_GPIO95__FUNC_MD32_0_TXD (MTK_PIN_NO(95) | 3)
+#define PINMUX_GPIO95__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(95) | 4)
+#define PINMUX_GPIO95__FUNC_TP_UTXD1_AO (MTK_PIN_NO(95) | 5)
+#define PINMUX_GPIO95__FUNC_TP_UTXD2_AO (MTK_PIN_NO(95) | 6)
+#define PINMUX_GPIO95__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(95) | 7)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_TDM_LRCK (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_I2S7_LRCK (MTK_PIN_NO(96) | 2)
+#define PINMUX_GPIO96__FUNC_I2S9_LRCK (MTK_PIN_NO(96) | 3)
+#define PINMUX_GPIO96__FUNC_SPI4_A_CLK (MTK_PIN_NO(96) | 4)
+#define PINMUX_GPIO96__FUNC_ADSP_JTAG0_TDI (MTK_PIN_NO(96) | 5)
+#define PINMUX_GPIO96__FUNC_CONN_BGF_DSP_L1_JDI (MTK_PIN_NO(96) | 6)
+#define PINMUX_GPIO96__FUNC_IO_JTAG_TDI (MTK_PIN_NO(96) | 7)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_TDM_BCK (MTK_PIN_NO(97) | 1)
+#define PINMUX_GPIO97__FUNC_I2S7_BCK (MTK_PIN_NO(97) | 2)
+#define PINMUX_GPIO97__FUNC_I2S9_BCK (MTK_PIN_NO(97) | 3)
+#define PINMUX_GPIO97__FUNC_SPI4_A_CSB (MTK_PIN_NO(97) | 4)
+#define PINMUX_GPIO97__FUNC_ADSP_JTAG0_TRSTN (MTK_PIN_NO(97) | 5)
+#define PINMUX_GPIO97__FUNC_CONN_BGF_DSP_L1_JINTP (MTK_PIN_NO(97) | 6)
+#define PINMUX_GPIO97__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(97) | 7)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_TDM_MCK (MTK_PIN_NO(98) | 1)
+#define PINMUX_GPIO98__FUNC_I2S7_MCK (MTK_PIN_NO(98) | 2)
+#define PINMUX_GPIO98__FUNC_I2S9_MCK (MTK_PIN_NO(98) | 3)
+#define PINMUX_GPIO98__FUNC_SPI4_A_MI (MTK_PIN_NO(98) | 4)
+#define PINMUX_GPIO98__FUNC_ADSP_JTAG0_TCK (MTK_PIN_NO(98) | 5)
+#define PINMUX_GPIO98__FUNC_CONN_BGF_DSP_L1_JCK (MTK_PIN_NO(98) | 6)
+#define PINMUX_GPIO98__FUNC_IO_JTAG_TCK (MTK_PIN_NO(98) | 7)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_TDM_DATA0 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_I2S6_DI (MTK_PIN_NO(99) | 2)
+#define PINMUX_GPIO99__FUNC_I2S8_DI (MTK_PIN_NO(99) | 3)
+#define PINMUX_GPIO99__FUNC_SPI4_A_MO (MTK_PIN_NO(99) | 4)
+#define PINMUX_GPIO99__FUNC_ADSP_JTAG0_TDO (MTK_PIN_NO(99) | 5)
+#define PINMUX_GPIO99__FUNC_CONN_BGF_DSP_L1_JDO (MTK_PIN_NO(99) | 6)
+#define PINMUX_GPIO99__FUNC_IO_JTAG_TDO (MTK_PIN_NO(99) | 7)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_TDM_DATA1 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_I2S7_DO (MTK_PIN_NO(100) | 2)
+#define PINMUX_GPIO100__FUNC_I2S9_DO (MTK_PIN_NO(100) | 3)
+#define PINMUX_GPIO100__FUNC_DP_TX_HPD (MTK_PIN_NO(100) | 4)
+#define PINMUX_GPIO100__FUNC_ADSP_JTAG0_TMS (MTK_PIN_NO(100) | 5)
+#define PINMUX_GPIO100__FUNC_CONN_BGF_DSP_L1_JMS (MTK_PIN_NO(100) | 6)
+#define PINMUX_GPIO100__FUNC_IO_JTAG_TMS (MTK_PIN_NO(100) | 7)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_TDM_DATA2 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_DMIC1_CLK (MTK_PIN_NO(101) | 2)
+#define PINMUX_GPIO101__FUNC_SRCLKENAI0 (MTK_PIN_NO(101) | 3)
+#define PINMUX_GPIO101__FUNC_SPI5_B_CLK (MTK_PIN_NO(101) | 4)
+#define PINMUX_GPIO101__FUNC_CLKM0 (MTK_PIN_NO(101) | 5)
+#define PINMUX_GPIO101__FUNC_DAP_MD32_SWD (MTK_PIN_NO(101) | 7)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_TDM_DATA3 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_DMIC1_DAT (MTK_PIN_NO(102) | 2)
+#define PINMUX_GPIO102__FUNC_SRCLKENAI1 (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_SPI5_B_CSB (MTK_PIN_NO(102) | 4)
+#define PINMUX_GPIO102__FUNC_DP_TX_HPD (MTK_PIN_NO(102) | 5)
+#define PINMUX_GPIO102__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(102) | 6)
+#define PINMUX_GPIO102__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(102) | 7)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_SPI0_A_MI (MTK_PIN_NO(103) | 1)
+#define PINMUX_GPIO103__FUNC_SCP_SPI0_MI (MTK_PIN_NO(103) | 2)
+#define PINMUX_GPIO103__FUNC_DFD_TDO (MTK_PIN_NO(103) | 5)
+#define PINMUX_GPIO103__FUNC_SPM_JTAG_TDO (MTK_PIN_NO(103) | 6)
+#define PINMUX_GPIO103__FUNC_JTDO_SEL1 (MTK_PIN_NO(103) | 7)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_SPI0_A_CSB (MTK_PIN_NO(104) | 1)
+#define PINMUX_GPIO104__FUNC_SCP_SPI0_CS (MTK_PIN_NO(104) | 2)
+#define PINMUX_GPIO104__FUNC_DFD_TMS (MTK_PIN_NO(104) | 5)
+#define PINMUX_GPIO104__FUNC_SPM_JTAG_TMS (MTK_PIN_NO(104) | 6)
+#define PINMUX_GPIO104__FUNC_JTMS_SEL1 (MTK_PIN_NO(104) | 7)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_SPI0_A_MO (MTK_PIN_NO(105) | 1)
+#define PINMUX_GPIO105__FUNC_SCP_SPI0_MO (MTK_PIN_NO(105) | 2)
+#define PINMUX_GPIO105__FUNC_SCP_SDA0 (MTK_PIN_NO(105) | 3)
+#define PINMUX_GPIO105__FUNC_DFD_TDI (MTK_PIN_NO(105) | 5)
+#define PINMUX_GPIO105__FUNC_SPM_JTAG_TDI (MTK_PIN_NO(105) | 6)
+#define PINMUX_GPIO105__FUNC_JTDI_SEL1 (MTK_PIN_NO(105) | 7)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_SPI0_A_CLK (MTK_PIN_NO(106) | 1)
+#define PINMUX_GPIO106__FUNC_SCP_SPI0_CK (MTK_PIN_NO(106) | 2)
+#define PINMUX_GPIO106__FUNC_SCP_SCL0 (MTK_PIN_NO(106) | 3)
+#define PINMUX_GPIO106__FUNC_DFD_TCK_XI (MTK_PIN_NO(106) | 5)
+#define PINMUX_GPIO106__FUNC_SPM_JTAG_TCK (MTK_PIN_NO(106) | 6)
+#define PINMUX_GPIO106__FUNC_JTCK_SEL1 (MTK_PIN_NO(106) | 7)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_DMIC_CLK (MTK_PIN_NO(107) | 1)
+#define PINMUX_GPIO107__FUNC_PWM_0 (MTK_PIN_NO(107) | 2)
+#define PINMUX_GPIO107__FUNC_CLKM2 (MTK_PIN_NO(107) | 3)
+#define PINMUX_GPIO107__FUNC_SPI5_B_MI (MTK_PIN_NO(107) | 4)
+#define PINMUX_GPIO107__FUNC_SPM_JTAG_TRSTN (MTK_PIN_NO(107) | 6)
+#define PINMUX_GPIO107__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(107) | 7)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_DMIC_DAT (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_PWM_1 (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_CLKM3 (MTK_PIN_NO(108) | 3)
+#define PINMUX_GPIO108__FUNC_SPI5_B_MO (MTK_PIN_NO(108) | 4)
+#define PINMUX_GPIO108__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(108) | 7)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_I2S1_MCK (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_I2S3_MCK (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_I2S2_MCK (MTK_PIN_NO(109) | 3)
+#define PINMUX_GPIO109__FUNC_DP_TX_HPD (MTK_PIN_NO(109) | 4)
+#define PINMUX_GPIO109__FUNC_I2S2_MCK_A (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_SRCLKENAI0 (MTK_PIN_NO(109) | 6)
+#define PINMUX_GPIO109__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(109) | 7)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_I2S1_BCK (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_I2S3_BCK (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_I2S2_BCK (MTK_PIN_NO(110) | 3)
+#define PINMUX_GPIO110__FUNC_PCM0_CLK (MTK_PIN_NO(110) | 4)
+#define PINMUX_GPIO110__FUNC_I2S2_BCK_A (MTK_PIN_NO(110) | 5)
+#define PINMUX_GPIO110__FUNC_CONN_BGF_MCU_TDO (MTK_PIN_NO(110) | 6)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_I2S1_LRCK (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_I2S3_LRCK (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_I2S2_LRCK (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_PCM0_SYNC (MTK_PIN_NO(111) | 4)
+#define PINMUX_GPIO111__FUNC_I2S2_LRCK_A (MTK_PIN_NO(111) | 5)
+#define PINMUX_GPIO111__FUNC_CONN_BGF_MCU_TDI (MTK_PIN_NO(111) | 6)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_I2S2_DI (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_I2S0_DI (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_I2S2_DI2 (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_PCM0_DI (MTK_PIN_NO(112) | 4)
+#define PINMUX_GPIO112__FUNC_I2S2_DI_A (MTK_PIN_NO(112) | 5)
+#define PINMUX_GPIO112__FUNC_CONN_BGF_MCU_TMS (MTK_PIN_NO(112) | 6)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_I2S1_DO (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_I2S3_DO (MTK_PIN_NO(113) | 2)
+#define PINMUX_GPIO113__FUNC_I2S5_DO (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_PCM0_DO (MTK_PIN_NO(113) | 4)
+#define PINMUX_GPIO113__FUNC_I2S2_DI2 (MTK_PIN_NO(113) | 5)
+#define PINMUX_GPIO113__FUNC_CONN_BGF_MCU_TCK (MTK_PIN_NO(113) | 6)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_SPI2_MI (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_SCP_SPI2_MI (MTK_PIN_NO(114) | 2)
+#define PINMUX_GPIO114__FUNC_CONN_BGF_MCU_TRST_B (MTK_PIN_NO(114) | 6)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_SPI2_CSB (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_SCP_SPI2_CS (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_CONN_BGF_MCU_DBGI_N (MTK_PIN_NO(115) | 6)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_SPI2_MO (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_SCP_SPI2_MO (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_SCP_SDA1 (MTK_PIN_NO(116) | 3)
+#define PINMUX_GPIO116__FUNC_CONN_BGF_MCU_DBGACK_N (MTK_PIN_NO(116) | 6)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_SPI2_CLK (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_SCP_SPI2_CK (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_SCP_SCL1 (MTK_PIN_NO(117) | 3)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_SCL1 (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_SCP_SCL0 (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_SCP_SCL1 (MTK_PIN_NO(118) | 3)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_SDA1 (MTK_PIN_NO(119) | 1)
+#define PINMUX_GPIO119__FUNC_SCP_SDA0 (MTK_PIN_NO(119) | 2)
+#define PINMUX_GPIO119__FUNC_SCP_SDA1 (MTK_PIN_NO(119) | 3)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_SCL9 (MTK_PIN_NO(120) | 1)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_SDA9 (MTK_PIN_NO(121) | 1)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_SCL8 (MTK_PIN_NO(122) | 1)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_SDA8 (MTK_PIN_NO(123) | 1)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_SCL7 (MTK_PIN_NO(124) | 1)
+#define PINMUX_GPIO124__FUNC_DMIC1_CLK (MTK_PIN_NO(124) | 2)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_SDA7 (MTK_PIN_NO(125) | 1)
+#define PINMUX_GPIO125__FUNC_DMIC1_DAT (MTK_PIN_NO(125) | 2)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_CMFLASH0 (MTK_PIN_NO(126) | 1)
+#define PINMUX_GPIO126__FUNC_PWM_2 (MTK_PIN_NO(126) | 2)
+#define PINMUX_GPIO126__FUNC_TP_UCTS1_AO (MTK_PIN_NO(126) | 3)
+#define PINMUX_GPIO126__FUNC_UCTS0 (MTK_PIN_NO(126) | 4)
+#define PINMUX_GPIO126__FUNC_SCL11 (MTK_PIN_NO(126) | 5)
+#define PINMUX_GPIO126__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(126) | 6)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_CMFLASH1 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_PWM_3 (MTK_PIN_NO(127) | 2)
+#define PINMUX_GPIO127__FUNC_TP_URTS1_AO (MTK_PIN_NO(127) | 3)
+#define PINMUX_GPIO127__FUNC_URTS0 (MTK_PIN_NO(127) | 4)
+#define PINMUX_GPIO127__FUNC_SDA11 (MTK_PIN_NO(127) | 5)
+#define PINMUX_GPIO127__FUNC_MD32_1_GPIO1 (MTK_PIN_NO(127) | 6)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_CMFLASH2 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_PWM_0 (MTK_PIN_NO(128) | 2)
+#define PINMUX_GPIO128__FUNC_TP_UCTS2_AO (MTK_PIN_NO(128) | 3)
+#define PINMUX_GPIO128__FUNC_UCTS1 (MTK_PIN_NO(128) | 4)
+#define PINMUX_GPIO128__FUNC_SCL12 (MTK_PIN_NO(128) | 5)
+#define PINMUX_GPIO128__FUNC_MD32_1_GPIO2 (MTK_PIN_NO(128) | 6)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_CMFLASH3 (MTK_PIN_NO(129) | 1)
+#define PINMUX_GPIO129__FUNC_PWM_1 (MTK_PIN_NO(129) | 2)
+#define PINMUX_GPIO129__FUNC_TP_URTS2_AO (MTK_PIN_NO(129) | 3)
+#define PINMUX_GPIO129__FUNC_URTS1 (MTK_PIN_NO(129) | 4)
+#define PINMUX_GPIO129__FUNC_SDA12 (MTK_PIN_NO(129) | 5)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_CMVREF0 (MTK_PIN_NO(130) | 1)
+#define PINMUX_GPIO130__FUNC_ANT_SEL10 (MTK_PIN_NO(130) | 2)
+#define PINMUX_GPIO130__FUNC_SCP_JTAG0_TDO (MTK_PIN_NO(130) | 3)
+#define PINMUX_GPIO130__FUNC_MD32_0_JTAG_TDO (MTK_PIN_NO(130) | 4)
+#define PINMUX_GPIO130__FUNC_SCL11 (MTK_PIN_NO(130) | 5)
+#define PINMUX_GPIO130__FUNC_CONN_WF_MCU_TDO (MTK_PIN_NO(130) | 6)
+#define PINMUX_GPIO130__FUNC_DBG_MON_A23 (MTK_PIN_NO(130) | 7)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_CMVREF1 (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_ANT_SEL11 (MTK_PIN_NO(131) | 2)
+#define PINMUX_GPIO131__FUNC_SCP_JTAG0_TDI (MTK_PIN_NO(131) | 3)
+#define PINMUX_GPIO131__FUNC_MD32_0_JTAG_TDI (MTK_PIN_NO(131) | 4)
+#define PINMUX_GPIO131__FUNC_SDA11 (MTK_PIN_NO(131) | 5)
+#define PINMUX_GPIO131__FUNC_CONN_WF_MCU_TDI (MTK_PIN_NO(131) | 6)
+#define PINMUX_GPIO131__FUNC_DBG_MON_A26 (MTK_PIN_NO(131) | 7)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_CMVREF2 (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_ANT_SEL12 (MTK_PIN_NO(132) | 2)
+#define PINMUX_GPIO132__FUNC_SCP_JTAG0_TMS (MTK_PIN_NO(132) | 3)
+#define PINMUX_GPIO132__FUNC_MD32_0_JTAG_TMS (MTK_PIN_NO(132) | 4)
+#define PINMUX_GPIO132__FUNC_CONN_WF_MCU_TMS (MTK_PIN_NO(132) | 6)
+#define PINMUX_GPIO132__FUNC_DBG_MON_A28 (MTK_PIN_NO(132) | 7)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_CMVREF3 (MTK_PIN_NO(133) | 1)
+#define PINMUX_GPIO133__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(133) | 2)
+#define PINMUX_GPIO133__FUNC_SCP_JTAG0_TCK (MTK_PIN_NO(133) | 3)
+#define PINMUX_GPIO133__FUNC_MD32_0_JTAG_TCK (MTK_PIN_NO(133) | 4)
+#define PINMUX_GPIO133__FUNC_CONN_WF_MCU_TCK (MTK_PIN_NO(133) | 6)
+#define PINMUX_GPIO133__FUNC_DBG_MON_A24 (MTK_PIN_NO(133) | 7)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_CMVREF4 (MTK_PIN_NO(134) | 1)
+#define PINMUX_GPIO134__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(134) | 2)
+#define PINMUX_GPIO134__FUNC_SCP_JTAG0_TRSTN (MTK_PIN_NO(134) | 3)
+#define PINMUX_GPIO134__FUNC_MD32_0_JTAG_TRST (MTK_PIN_NO(134) | 4)
+#define PINMUX_GPIO134__FUNC_CONN_WF_MCU_TRST_B (MTK_PIN_NO(134) | 6)
+#define PINMUX_GPIO134__FUNC_DBG_MON_A27 (MTK_PIN_NO(134) | 7)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_PWM_0 (MTK_PIN_NO(135) | 1)
+#define PINMUX_GPIO135__FUNC_SRCLKENAI1 (MTK_PIN_NO(135) | 2)
+#define PINMUX_GPIO135__FUNC_MD_URXD0 (MTK_PIN_NO(135) | 3)
+#define PINMUX_GPIO135__FUNC_MD32_0_RXD (MTK_PIN_NO(135) | 4)
+#define PINMUX_GPIO135__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(135) | 5)
+#define PINMUX_GPIO135__FUNC_CONN_WF_MCU_DBGI_N (MTK_PIN_NO(135) | 6)
+#define PINMUX_GPIO135__FUNC_DBG_MON_A29 (MTK_PIN_NO(135) | 7)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_CMMCLK3 (MTK_PIN_NO(136) | 1)
+#define PINMUX_GPIO136__FUNC_CLKM1 (MTK_PIN_NO(136) | 2)
+#define PINMUX_GPIO136__FUNC_MD_UTXD0 (MTK_PIN_NO(136) | 3)
+#define PINMUX_GPIO136__FUNC_MD32_0_TXD (MTK_PIN_NO(136) | 4)
+#define PINMUX_GPIO136__FUNC_CONN_BT_TXD (MTK_PIN_NO(136) | 5)
+#define PINMUX_GPIO136__FUNC_CONN_WF_MCU_DBGACK_N (MTK_PIN_NO(136) | 6)
+#define PINMUX_GPIO136__FUNC_DBG_MON_A25 (MTK_PIN_NO(136) | 7)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_CMMCLK4 (MTK_PIN_NO(137) | 1)
+#define PINMUX_GPIO137__FUNC_CLKM2 (MTK_PIN_NO(137) | 2)
+#define PINMUX_GPIO137__FUNC_MD_URXD1 (MTK_PIN_NO(137) | 3)
+#define PINMUX_GPIO137__FUNC_MD32_1_RXD (MTK_PIN_NO(137) | 4)
+#define PINMUX_GPIO137__FUNC_ILDO_DOUT0 (MTK_PIN_NO(137) | 5)
+#define PINMUX_GPIO137__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(137) | 6)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_CMMCLK5 (MTK_PIN_NO(138) | 1)
+#define PINMUX_GPIO138__FUNC_CLKM3 (MTK_PIN_NO(138) | 2)
+#define PINMUX_GPIO138__FUNC_MD_UTXD1 (MTK_PIN_NO(138) | 3)
+#define PINMUX_GPIO138__FUNC_MD32_1_TXD (MTK_PIN_NO(138) | 4)
+#define PINMUX_GPIO138__FUNC_ILDO_DOUT1 (MTK_PIN_NO(138) | 5)
+#define PINMUX_GPIO138__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(138) | 6)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_SCL4 (MTK_PIN_NO(139) | 1)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_SDA4 (MTK_PIN_NO(140) | 1)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_SCL2 (MTK_PIN_NO(141) | 1)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_SDA2 (MTK_PIN_NO(142) | 1)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_CMVREF0 (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_SPI3_CLK (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_ADSP_JTAG1_TDO (MTK_PIN_NO(143) | 3)
+#define PINMUX_GPIO143__FUNC_SCP_JTAG1_TDO (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_MD32_1_JTAG_TDO (MTK_PIN_NO(143) | 5)
+#define PINMUX_GPIO143__FUNC_CONN_BGF_DSP_L5_JDO (MTK_PIN_NO(143) | 6)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_CMVREF1 (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_SPI3_CSB (MTK_PIN_NO(144) | 2)
+#define PINMUX_GPIO144__FUNC_ADSP_JTAG1_TDI (MTK_PIN_NO(144) | 3)
+#define PINMUX_GPIO144__FUNC_SCP_JTAG1_TDI (MTK_PIN_NO(144) | 4)
+#define PINMUX_GPIO144__FUNC_MD32_1_JTAG_TDI (MTK_PIN_NO(144) | 5)
+#define PINMUX_GPIO144__FUNC_CONN_BGF_DSP_L5_JDI (MTK_PIN_NO(144) | 6)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_CMVREF2 (MTK_PIN_NO(145) | 1)
+#define PINMUX_GPIO145__FUNC_SPI3_MI (MTK_PIN_NO(145) | 2)
+#define PINMUX_GPIO145__FUNC_ADSP_JTAG1_TMS (MTK_PIN_NO(145) | 3)
+#define PINMUX_GPIO145__FUNC_SCP_JTAG1_TMS (MTK_PIN_NO(145) | 4)
+#define PINMUX_GPIO145__FUNC_MD32_1_JTAG_TMS (MTK_PIN_NO(145) | 5)
+#define PINMUX_GPIO145__FUNC_CONN_BGF_DSP_L5_JMS (MTK_PIN_NO(145) | 6)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_CMVREF3 (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_SPI3_MO (MTK_PIN_NO(146) | 2)
+#define PINMUX_GPIO146__FUNC_ADSP_JTAG1_TCK (MTK_PIN_NO(146) | 3)
+#define PINMUX_GPIO146__FUNC_SCP_JTAG1_TCK (MTK_PIN_NO(146) | 4)
+#define PINMUX_GPIO146__FUNC_MD32_1_JTAG_TCK (MTK_PIN_NO(146) | 5)
+#define PINMUX_GPIO146__FUNC_CONN_BGF_DSP_L5_JCK (MTK_PIN_NO(146) | 6)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_CMVREF4 (MTK_PIN_NO(147) | 1)
+#define PINMUX_GPIO147__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(147) | 2)
+#define PINMUX_GPIO147__FUNC_ADSP_JTAG1_TRSTN (MTK_PIN_NO(147) | 3)
+#define PINMUX_GPIO147__FUNC_SCP_JTAG1_TRSTN (MTK_PIN_NO(147) | 4)
+#define PINMUX_GPIO147__FUNC_MD32_1_JTAG_TRST (MTK_PIN_NO(147) | 5)
+#define PINMUX_GPIO147__FUNC_CONN_BGF_DSP_L5_JINTP (MTK_PIN_NO(147) | 6)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_PWM_1 (MTK_PIN_NO(148) | 1)
+#define PINMUX_GPIO148__FUNC_AGPS_SYNC (MTK_PIN_NO(148) | 2)
+#define PINMUX_GPIO148__FUNC_CMMCLK5 (MTK_PIN_NO(148) | 3)
+#define PINMUX_GPIO148__FUNC_CONN_WF_MCU_AICE_TMSC (MTK_PIN_NO(148) | 6)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_CMMCLK0 (MTK_PIN_NO(149) | 1)
+#define PINMUX_GPIO149__FUNC_CLKM0 (MTK_PIN_NO(149) | 2)
+#define PINMUX_GPIO149__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(149) | 3)
+#define PINMUX_GPIO149__FUNC_CONN_WF_MCU_AICE_TCKC (MTK_PIN_NO(149) | 6)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_CMMCLK1 (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_CLKM1 (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_MD32_0_GPIO1 (MTK_PIN_NO(150) | 3)
+#define PINMUX_GPIO150__FUNC_CONN_BGF_MCU_AICE_TMSC (MTK_PIN_NO(150) | 6)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_CMMCLK2 (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_CLKM2 (MTK_PIN_NO(151) | 2)
+#define PINMUX_GPIO151__FUNC_MD32_0_GPIO2 (MTK_PIN_NO(151) | 3)
+#define PINMUX_GPIO151__FUNC_CONN_BGF_MCU_AICE_TCKC (MTK_PIN_NO(151) | 6)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_KPROW1 (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_PWM_2 (MTK_PIN_NO(152) | 2)
+#define PINMUX_GPIO152__FUNC_IDDIG (MTK_PIN_NO(152) | 3)
+#define PINMUX_GPIO152__FUNC_DP_TX_HPD (MTK_PIN_NO(152) | 4)
+#define PINMUX_GPIO152__FUNC_DSI1_TE (MTK_PIN_NO(152) | 5)
+#define PINMUX_GPIO152__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(152) | 6)
+#define PINMUX_GPIO152__FUNC_DBG_MON_B2 (MTK_PIN_NO(152) | 7)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_KPROW0 (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_DBG_MON_B1 (MTK_PIN_NO(153) | 7)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_KPCOL0 (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_DBG_MON_A32 (MTK_PIN_NO(154) | 7)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_KPCOL1 (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_PWM_3 (MTK_PIN_NO(155) | 2)
+#define PINMUX_GPIO155__FUNC_USB_DRVVBUS (MTK_PIN_NO(155) | 3)
+#define PINMUX_GPIO155__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(155) | 4)
+#define PINMUX_GPIO155__FUNC_LCM1_RST (MTK_PIN_NO(155) | 5)
+#define PINMUX_GPIO155__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(155) | 6)
+#define PINMUX_GPIO155__FUNC_DBG_MON_B0 (MTK_PIN_NO(155) | 7)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_SPI1_A_CLK (MTK_PIN_NO(156) | 1)
+#define PINMUX_GPIO156__FUNC_SCP_SPI1_A_CK (MTK_PIN_NO(156) | 2)
+#define PINMUX_GPIO156__FUNC_MRG_CLK (MTK_PIN_NO(156) | 3)
+#define PINMUX_GPIO156__FUNC_AGPS_SYNC (MTK_PIN_NO(156) | 4)
+#define PINMUX_GPIO156__FUNC_SCL12 (MTK_PIN_NO(156) | 5)
+#define PINMUX_GPIO156__FUNC_DBG_MON_B3 (MTK_PIN_NO(156) | 7)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_SPI1_A_CSB (MTK_PIN_NO(157) | 1)
+#define PINMUX_GPIO157__FUNC_SCP_SPI1_A_CS (MTK_PIN_NO(157) | 2)
+#define PINMUX_GPIO157__FUNC_MRG_SYNC (MTK_PIN_NO(157) | 3)
+#define PINMUX_GPIO157__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(157) | 4)
+#define PINMUX_GPIO157__FUNC_SDA12 (MTK_PIN_NO(157) | 5)
+#define PINMUX_GPIO157__FUNC_DBG_MON_B4 (MTK_PIN_NO(157) | 7)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_SPI1_A_MI (MTK_PIN_NO(158) | 1)
+#define PINMUX_GPIO158__FUNC_SCP_SPI1_A_MI (MTK_PIN_NO(158) | 2)
+#define PINMUX_GPIO158__FUNC_MRG_DI (MTK_PIN_NO(158) | 3)
+#define PINMUX_GPIO158__FUNC_PTA_RXD (MTK_PIN_NO(158) | 4)
+#define PINMUX_GPIO158__FUNC_SCL13 (MTK_PIN_NO(158) | 5)
+#define PINMUX_GPIO158__FUNC_DBG_MON_B5 (MTK_PIN_NO(158) | 7)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_SPI1_A_MO (MTK_PIN_NO(159) | 1)
+#define PINMUX_GPIO159__FUNC_SCP_SPI1_A_MO (MTK_PIN_NO(159) | 2)
+#define PINMUX_GPIO159__FUNC_MRG_DO (MTK_PIN_NO(159) | 3)
+#define PINMUX_GPIO159__FUNC_PTA_TXD (MTK_PIN_NO(159) | 4)
+#define PINMUX_GPIO159__FUNC_SDA13 (MTK_PIN_NO(159) | 5)
+#define PINMUX_GPIO159__FUNC_DBG_MON_B6 (MTK_PIN_NO(159) | 7)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_SCL3 (MTK_PIN_NO(160) | 1)
+#define PINMUX_GPIO160__FUNC_SCP_SCL0 (MTK_PIN_NO(160) | 2)
+#define PINMUX_GPIO160__FUNC_SCP_SCL1 (MTK_PIN_NO(160) | 3)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_SDA3 (MTK_PIN_NO(161) | 1)
+#define PINMUX_GPIO161__FUNC_SCP_SDA0 (MTK_PIN_NO(161) | 2)
+#define PINMUX_GPIO161__FUNC_SCP_SDA1 (MTK_PIN_NO(161) | 3)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_ANT_SEL0 (MTK_PIN_NO(162) | 1)
+#define PINMUX_GPIO162__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(162) | 2)
+#define PINMUX_GPIO162__FUNC_DBG_MON_B7 (MTK_PIN_NO(162) | 7)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_ANT_SEL1 (MTK_PIN_NO(163) | 1)
+#define PINMUX_GPIO163__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(163) | 2)
+#define PINMUX_GPIO163__FUNC_DBG_MON_B8 (MTK_PIN_NO(163) | 7)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_ANT_SEL2 (MTK_PIN_NO(164) | 1)
+#define PINMUX_GPIO164__FUNC_SCP_SPI1_B_CK (MTK_PIN_NO(164) | 2)
+#define PINMUX_GPIO164__FUNC_TP_URXD1_AO (MTK_PIN_NO(164) | 3)
+#define PINMUX_GPIO164__FUNC_UCTS0 (MTK_PIN_NO(164) | 5)
+#define PINMUX_GPIO164__FUNC_DBG_MON_B9 (MTK_PIN_NO(164) | 7)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_ANT_SEL3 (MTK_PIN_NO(165) | 1)
+#define PINMUX_GPIO165__FUNC_SCP_SPI1_B_CS (MTK_PIN_NO(165) | 2)
+#define PINMUX_GPIO165__FUNC_TP_UTXD1_AO (MTK_PIN_NO(165) | 3)
+#define PINMUX_GPIO165__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(165) | 4)
+#define PINMUX_GPIO165__FUNC_URTS0 (MTK_PIN_NO(165) | 5)
+#define PINMUX_GPIO165__FUNC_DBG_MON_B10 (MTK_PIN_NO(165) | 7)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_ANT_SEL4 (MTK_PIN_NO(166) | 1)
+#define PINMUX_GPIO166__FUNC_SCP_SPI1_B_MI (MTK_PIN_NO(166) | 2)
+#define PINMUX_GPIO166__FUNC_TP_URXD2_AO (MTK_PIN_NO(166) | 3)
+#define PINMUX_GPIO166__FUNC_SRCLKENAI1 (MTK_PIN_NO(166) | 4)
+#define PINMUX_GPIO166__FUNC_UCTS1 (MTK_PIN_NO(166) | 5)
+#define PINMUX_GPIO166__FUNC_DBG_MON_B11 (MTK_PIN_NO(166) | 7)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_ANT_SEL5 (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_SCP_SPI1_B_MO (MTK_PIN_NO(167) | 2)
+#define PINMUX_GPIO167__FUNC_TP_UTXD2_AO (MTK_PIN_NO(167) | 3)
+#define PINMUX_GPIO167__FUNC_SRCLKENAI0 (MTK_PIN_NO(167) | 4)
+#define PINMUX_GPIO167__FUNC_URTS1 (MTK_PIN_NO(167) | 5)
+#define PINMUX_GPIO167__FUNC_DBG_MON_B12 (MTK_PIN_NO(167) | 7)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_ANT_SEL6 (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_SPI0_B_CLK (MTK_PIN_NO(168) | 2)
+#define PINMUX_GPIO168__FUNC_TP_UCTS1_AO (MTK_PIN_NO(168) | 3)
+#define PINMUX_GPIO168__FUNC_KPCOL2 (MTK_PIN_NO(168) | 4)
+#define PINMUX_GPIO168__FUNC_MD_UCTS0 (MTK_PIN_NO(168) | 5)
+#define PINMUX_GPIO168__FUNC_SCL12 (MTK_PIN_NO(168) | 6)
+#define PINMUX_GPIO168__FUNC_DBG_MON_B13 (MTK_PIN_NO(168) | 7)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_ANT_SEL7 (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_SPI0_B_CSB (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_TP_URTS1_AO (MTK_PIN_NO(169) | 3)
+#define PINMUX_GPIO169__FUNC_KPROW2 (MTK_PIN_NO(169) | 4)
+#define PINMUX_GPIO169__FUNC_MD_URTS0 (MTK_PIN_NO(169) | 5)
+#define PINMUX_GPIO169__FUNC_SDA12 (MTK_PIN_NO(169) | 6)
+#define PINMUX_GPIO169__FUNC_DBG_MON_B14 (MTK_PIN_NO(169) | 7)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_ANT_SEL8 (MTK_PIN_NO(170) | 1)
+#define PINMUX_GPIO170__FUNC_SPI0_B_MI (MTK_PIN_NO(170) | 2)
+#define PINMUX_GPIO170__FUNC_TP_UCTS2_AO (MTK_PIN_NO(170) | 3)
+#define PINMUX_GPIO170__FUNC_SRCLKENAI1 (MTK_PIN_NO(170) | 4)
+#define PINMUX_GPIO170__FUNC_MD_UCTS1 (MTK_PIN_NO(170) | 5)
+#define PINMUX_GPIO170__FUNC_SCL13 (MTK_PIN_NO(170) | 6)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_ANT_SEL9 (MTK_PIN_NO(171) | 1)
+#define PINMUX_GPIO171__FUNC_SPI0_B_MO (MTK_PIN_NO(171) | 2)
+#define PINMUX_GPIO171__FUNC_TP_URTS2_AO (MTK_PIN_NO(171) | 3)
+#define PINMUX_GPIO171__FUNC_SRCLKENAI0 (MTK_PIN_NO(171) | 4)
+#define PINMUX_GPIO171__FUNC_MD_URTS1 (MTK_PIN_NO(171) | 5)
+#define PINMUX_GPIO171__FUNC_SDA13 (MTK_PIN_NO(171) | 6)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_CONN_TOP_CLK (MTK_PIN_NO(172) | 1)
+#define PINMUX_GPIO172__FUNC_AUXIF_CLK0 (MTK_PIN_NO(172) | 2)
+#define PINMUX_GPIO172__FUNC_DBG_MON_B18 (MTK_PIN_NO(172) | 7)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_CONN_TOP_DATA (MTK_PIN_NO(173) | 1)
+#define PINMUX_GPIO173__FUNC_AUXIF_ST0 (MTK_PIN_NO(173) | 2)
+#define PINMUX_GPIO173__FUNC_DBG_MON_B19 (MTK_PIN_NO(173) | 7)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_CONN_HRST_B (MTK_PIN_NO(174) | 1)
+#define PINMUX_GPIO174__FUNC_DBG_MON_B17 (MTK_PIN_NO(174) | 7)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_CONN_WB_PTA (MTK_PIN_NO(175) | 1)
+#define PINMUX_GPIO175__FUNC_DBG_MON_B20 (MTK_PIN_NO(175) | 7)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define PINMUX_GPIO176__FUNC_CONN_BT_CLK (MTK_PIN_NO(176) | 1)
+#define PINMUX_GPIO176__FUNC_AUXIF_CLK1 (MTK_PIN_NO(176) | 2)
+#define PINMUX_GPIO176__FUNC_DBG_MON_B15 (MTK_PIN_NO(176) | 7)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define PINMUX_GPIO177__FUNC_CONN_BT_DATA (MTK_PIN_NO(177) | 1)
+#define PINMUX_GPIO177__FUNC_AUXIF_ST1 (MTK_PIN_NO(177) | 2)
+#define PINMUX_GPIO177__FUNC_DBG_MON_B16 (MTK_PIN_NO(177) | 7)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define PINMUX_GPIO178__FUNC_CONN_WF_CTRL0 (MTK_PIN_NO(178) | 1)
+#define PINMUX_GPIO178__FUNC_DBG_MON_B21 (MTK_PIN_NO(178) | 7)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define PINMUX_GPIO179__FUNC_CONN_WF_CTRL1 (MTK_PIN_NO(179) | 1)
+#define PINMUX_GPIO179__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(179) | 2)
+#define PINMUX_GPIO179__FUNC_DBG_MON_B22 (MTK_PIN_NO(179) | 7)
+
+#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define PINMUX_GPIO180__FUNC_CONN_WF_CTRL2 (MTK_PIN_NO(180) | 1)
+#define PINMUX_GPIO180__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(180) | 2)
+#define PINMUX_GPIO180__FUNC_DBG_MON_B23 (MTK_PIN_NO(180) | 7)
+
+#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define PINMUX_GPIO181__FUNC_CONN_WF_CTRL3 (MTK_PIN_NO(181) | 1)
+#define PINMUX_GPIO181__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(181) | 2)
+
+#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define PINMUX_GPIO182__FUNC_CONN_WF_CTRL4 (MTK_PIN_NO(182) | 1)
+#define PINMUX_GPIO182__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(182) | 2)
+
+#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define PINMUX_GPIO183__FUNC_MSDC0_CMD (MTK_PIN_NO(183) | 1)
+
+#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define PINMUX_GPIO184__FUNC_MSDC0_DAT0 (MTK_PIN_NO(184) | 1)
+
+#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define PINMUX_GPIO185__FUNC_MSDC0_DAT2 (MTK_PIN_NO(185) | 1)
+
+#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define PINMUX_GPIO186__FUNC_MSDC0_DAT4 (MTK_PIN_NO(186) | 1)
+
+#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define PINMUX_GPIO187__FUNC_MSDC0_DAT6 (MTK_PIN_NO(187) | 1)
+
+#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define PINMUX_GPIO188__FUNC_MSDC0_DAT1 (MTK_PIN_NO(188) | 1)
+
+#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define PINMUX_GPIO189__FUNC_MSDC0_DAT5 (MTK_PIN_NO(189) | 1)
+
+#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define PINMUX_GPIO190__FUNC_MSDC0_DAT7 (MTK_PIN_NO(190) | 1)
+
+#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define PINMUX_GPIO191__FUNC_MSDC0_DSL (MTK_PIN_NO(191) | 1)
+#define PINMUX_GPIO191__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(191) | 2)
+#define PINMUX_GPIO191__FUNC_IDDIG (MTK_PIN_NO(191) | 3)
+#define PINMUX_GPIO191__FUNC_DMIC_CLK (MTK_PIN_NO(191) | 4)
+#define PINMUX_GPIO191__FUNC_DSI1_TE (MTK_PIN_NO(191) | 5)
+
+#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define PINMUX_GPIO192__FUNC_MSDC0_CLK (MTK_PIN_NO(192) | 1)
+#define PINMUX_GPIO192__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(192) | 2)
+#define PINMUX_GPIO192__FUNC_USB_DRVVBUS (MTK_PIN_NO(192) | 3)
+#define PINMUX_GPIO192__FUNC_DMIC_DAT (MTK_PIN_NO(192) | 4)
+#define PINMUX_GPIO192__FUNC_LCM1_RST (MTK_PIN_NO(192) | 5)
+
+#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define PINMUX_GPIO193__FUNC_MSDC0_DAT3 (MTK_PIN_NO(193) | 1)
+
+#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define PINMUX_GPIO194__FUNC_MSDC0_RSTB (MTK_PIN_NO(194) | 1)
+
+#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define PINMUX_GPIO195__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(195) | 1)
+#define PINMUX_GPIO195__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(195) | 2)
+
+#define PINMUX_GPIO196__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define PINMUX_GPIO196__FUNC_AUD_DAT_MOSI2 (MTK_PIN_NO(196) | 1)
+#define PINMUX_GPIO196__FUNC_DBG_MON_B27 (MTK_PIN_NO(196) | 7)
+
+#define PINMUX_GPIO197__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define PINMUX_GPIO197__FUNC_AUD_NLE_MOSI1 (MTK_PIN_NO(197) | 1)
+#define PINMUX_GPIO197__FUNC_AUD_CLK_MISO (MTK_PIN_NO(197) | 2)
+#define PINMUX_GPIO197__FUNC_I2S2_MCK (MTK_PIN_NO(197) | 3)
+#define PINMUX_GPIO197__FUNC_I2S6_MCK (MTK_PIN_NO(197) | 4)
+#define PINMUX_GPIO197__FUNC_I2S8_MCK (MTK_PIN_NO(197) | 5)
+#define PINMUX_GPIO197__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(197) | 6)
+#define PINMUX_GPIO197__FUNC_DBG_MON_B28 (MTK_PIN_NO(197) | 7)
+
+#define PINMUX_GPIO198__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define PINMUX_GPIO198__FUNC_AUD_NLE_MOSI0 (MTK_PIN_NO(198) | 1)
+#define PINMUX_GPIO198__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(198) | 2)
+#define PINMUX_GPIO198__FUNC_I2S2_BCK (MTK_PIN_NO(198) | 3)
+#define PINMUX_GPIO198__FUNC_I2S6_BCK (MTK_PIN_NO(198) | 4)
+#define PINMUX_GPIO198__FUNC_I2S8_BCK (MTK_PIN_NO(198) | 5)
+#define PINMUX_GPIO198__FUNC_DBG_MON_B29 (MTK_PIN_NO(198) | 7)
+
+#define PINMUX_GPIO199__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define PINMUX_GPIO199__FUNC_AUD_DAT_MISO2 (MTK_PIN_NO(199) | 1)
+#define PINMUX_GPIO199__FUNC_I2S2_DI2 (MTK_PIN_NO(199) | 3)
+#define PINMUX_GPIO199__FUNC_DBG_MON_B32 (MTK_PIN_NO(199) | 7)
+
+#define PINMUX_GPIO200__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define PINMUX_GPIO200__FUNC_SCL6 (MTK_PIN_NO(200) | 1)
+#define PINMUX_GPIO200__FUNC_SCP_SCL0 (MTK_PIN_NO(200) | 2)
+#define PINMUX_GPIO200__FUNC_SCP_SCL1 (MTK_PIN_NO(200) | 3)
+#define PINMUX_GPIO200__FUNC_SCL_6306 (MTK_PIN_NO(200) | 4)
+
+#define PINMUX_GPIO201__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define PINMUX_GPIO201__FUNC_SDA6 (MTK_PIN_NO(201) | 1)
+#define PINMUX_GPIO201__FUNC_SCP_SDA0 (MTK_PIN_NO(201) | 2)
+#define PINMUX_GPIO201__FUNC_SCP_SDA1 (MTK_PIN_NO(201) | 3)
+#define PINMUX_GPIO201__FUNC_SDA_6306 (MTK_PIN_NO(201) | 4)
+
+#define PINMUX_GPIO202__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define PINMUX_GPIO202__FUNC_SCL5 (MTK_PIN_NO(202) | 1)
+
+#define PINMUX_GPIO203__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define PINMUX_GPIO203__FUNC_SDA5 (MTK_PIN_NO(203) | 1)
+
+#define PINMUX_GPIO204__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define PINMUX_GPIO204__FUNC_SCL0 (MTK_PIN_NO(204) | 1)
+#define PINMUX_GPIO204__FUNC_SPI4_C_CLK (MTK_PIN_NO(204) | 2)
+#define PINMUX_GPIO204__FUNC_SPI7_B_CLK (MTK_PIN_NO(204) | 3)
+
+#define PINMUX_GPIO205__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define PINMUX_GPIO205__FUNC_SDA0 (MTK_PIN_NO(205) | 1)
+#define PINMUX_GPIO205__FUNC_SPI4_C_CSB (MTK_PIN_NO(205) | 2)
+#define PINMUX_GPIO205__FUNC_SPI7_B_CSB (MTK_PIN_NO(205) | 3)
+
+#define PINMUX_GPIO206__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define PINMUX_GPIO206__FUNC_SRCLKENA0 (MTK_PIN_NO(206) | 1)
+
+#define PINMUX_GPIO207__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define PINMUX_GPIO207__FUNC_SRCLKENA1 (MTK_PIN_NO(207) | 1)
+
+#define PINMUX_GPIO208__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define PINMUX_GPIO208__FUNC_WATCHDOG (MTK_PIN_NO(208) | 1)
+
+#define PINMUX_GPIO209__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define PINMUX_GPIO209__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(209) | 1)
+#define PINMUX_GPIO209__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(209) | 2)
+
+#define PINMUX_GPIO210__FUNC_GPIO210 (MTK_PIN_NO(210) | 0)
+#define PINMUX_GPIO210__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(210) | 1)
+
+#define PINMUX_GPIO211__FUNC_GPIO211 (MTK_PIN_NO(211) | 0)
+#define PINMUX_GPIO211__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(211) | 1)
+#define PINMUX_GPIO211__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(211) | 2)
+
+#define PINMUX_GPIO212__FUNC_GPIO212 (MTK_PIN_NO(212) | 0)
+#define PINMUX_GPIO212__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(212) | 1)
+
+#define PINMUX_GPIO213__FUNC_GPIO213 (MTK_PIN_NO(213) | 0)
+#define PINMUX_GPIO213__FUNC_RTC32K_CK (MTK_PIN_NO(213) | 1)
+
+#define PINMUX_GPIO214__FUNC_GPIO214 (MTK_PIN_NO(214) | 0)
+#define PINMUX_GPIO214__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(214) | 1)
+#define PINMUX_GPIO214__FUNC_I2S1_MCK (MTK_PIN_NO(214) | 3)
+#define PINMUX_GPIO214__FUNC_I2S7_MCK (MTK_PIN_NO(214) | 4)
+#define PINMUX_GPIO214__FUNC_I2S9_MCK (MTK_PIN_NO(214) | 5)
+#define PINMUX_GPIO214__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(214) | 6)
+
+#define PINMUX_GPIO215__FUNC_GPIO215 (MTK_PIN_NO(215) | 0)
+#define PINMUX_GPIO215__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(215) | 1)
+#define PINMUX_GPIO215__FUNC_I2S1_BCK (MTK_PIN_NO(215) | 3)
+#define PINMUX_GPIO215__FUNC_I2S7_BCK (MTK_PIN_NO(215) | 4)
+#define PINMUX_GPIO215__FUNC_I2S9_BCK (MTK_PIN_NO(215) | 5)
+#define PINMUX_GPIO215__FUNC_DBG_MON_B24 (MTK_PIN_NO(215) | 7)
+
+#define PINMUX_GPIO216__FUNC_GPIO216 (MTK_PIN_NO(216) | 0)
+#define PINMUX_GPIO216__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(216) | 1)
+#define PINMUX_GPIO216__FUNC_I2S1_LRCK (MTK_PIN_NO(216) | 3)
+#define PINMUX_GPIO216__FUNC_I2S7_LRCK (MTK_PIN_NO(216) | 4)
+#define PINMUX_GPIO216__FUNC_I2S9_LRCK (MTK_PIN_NO(216) | 5)
+#define PINMUX_GPIO216__FUNC_DBG_MON_B25 (MTK_PIN_NO(216) | 7)
+
+#define PINMUX_GPIO217__FUNC_GPIO217 (MTK_PIN_NO(217) | 0)
+#define PINMUX_GPIO217__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(217) | 1)
+#define PINMUX_GPIO217__FUNC_I2S1_DO (MTK_PIN_NO(217) | 3)
+#define PINMUX_GPIO217__FUNC_I2S7_DO (MTK_PIN_NO(217) | 4)
+#define PINMUX_GPIO217__FUNC_I2S9_DO (MTK_PIN_NO(217) | 5)
+#define PINMUX_GPIO217__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(217) | 6)
+#define PINMUX_GPIO217__FUNC_DBG_MON_B26 (MTK_PIN_NO(217) | 7)
+
+#define PINMUX_GPIO218__FUNC_GPIO218 (MTK_PIN_NO(218) | 0)
+#define PINMUX_GPIO218__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(218) | 1)
+#define PINMUX_GPIO218__FUNC_VOW_DAT_MISO (MTK_PIN_NO(218) | 2)
+#define PINMUX_GPIO218__FUNC_I2S2_LRCK (MTK_PIN_NO(218) | 3)
+#define PINMUX_GPIO218__FUNC_I2S6_LRCK (MTK_PIN_NO(218) | 4)
+#define PINMUX_GPIO218__FUNC_I2S8_LRCK (MTK_PIN_NO(218) | 5)
+#define PINMUX_GPIO218__FUNC_DBG_MON_B30 (MTK_PIN_NO(218) | 7)
+
+#define PINMUX_GPIO219__FUNC_GPIO219 (MTK_PIN_NO(219) | 0)
+#define PINMUX_GPIO219__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(219) | 1)
+#define PINMUX_GPIO219__FUNC_VOW_CLK_MISO (MTK_PIN_NO(219) | 2)
+#define PINMUX_GPIO219__FUNC_I2S2_DI (MTK_PIN_NO(219) | 3)
+#define PINMUX_GPIO219__FUNC_I2S6_DI (MTK_PIN_NO(219) | 4)
+#define PINMUX_GPIO219__FUNC_I2S8_DI (MTK_PIN_NO(219) | 5)
+#define PINMUX_GPIO219__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(219) | 6)
+#define PINMUX_GPIO219__FUNC_DBG_MON_B31 (MTK_PIN_NO(219) | 7)
+
+#endif /* __MT6893-PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index d12eac9b3eeb..9f100b18a676 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -320,7 +320,7 @@
 	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
 	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
 	 */
-	asm_sel {
+	asm-sel-hog {
 		gpio-hog;
 		gpios = <90 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 917fa39a74f8..158bd9a305d7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -278,6 +278,10 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		soc-uuid@140 {
+			reg = <0x140 0x8>;
+		};
+
 		thermal_calibration: calib@198 {
 			reg = <0x198 0xc>;
 		};
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
index 4f6cbb491287..2e39e7287730 100644
--- a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts
@@ -3,13 +3,163 @@
 /dts-v1/;
 
 #include "mt7981b.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "dt-bindings/pinctrl/mt65xx.h"
 
 / {
 	compatible = "openwrt,one", "mediatek,mt7981b";
 	model = "OpenWrt One";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
 		device_type = "memory";
 	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			default-brightness = <0>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+			pwms = <&pwm 0 10000>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-brightness = <0>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+			pwms = <&pwm 1 10000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&pio 35 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+	};
+};
+
+&pio {
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm0_0", "pwm1_1";
+		};
+	};
+
+	spi2_flash_pins: spi2-pins {
+		mux {
+			function = "spi";
+			groups = "spi2";
+		};
+
+		conf-pu {
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+			drive-strength = <8>;
+			pins = "SPI2_CS", "SPI2_WP";
+		};
+
+		conf-pd {
+			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+			drive-strength = <8>;
+			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_flash_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x00000 0x40000>;
+				label = "bl2-nor";
+			};
+
+			partition@40000 {
+				reg = <0x40000 0xc0000>;
+				label = "factory";
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					wifi_factory_calibration: eeprom@0 {
+						reg = <0x0 0x1000>;
+					};
+
+					wan_factory_mac: macaddr@24 {
+						reg = <0x24 0x6>;
+						compatible = "mac-base";
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+
+			partition@100000 {
+				reg = <0x100000 0x80000>;
+				label = "fip-nor";
+			};
+
+			partition@180000 {
+				reg = <0x180000 0xc80000>;
+				label = "recovery";
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
index 5cbea9cd411f..416096b80770 100644
--- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
@@ -41,6 +41,18 @@
 		method = "smc";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		ranges;
@@ -76,13 +88,13 @@
 			#reset-cells = <1>;
 		};
 
-		clock-controller@1001e000 {
+		apmixedsys: clock-controller@1001e000 {
 			compatible = "mediatek,mt7981-apmixedsys";
 			reg = <0 0x1001e000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		pwm@10048000 {
+		pwm: pwm@10048000 {
 			compatible = "mediatek,mt7981-pwm";
 			reg = <0 0x10048000 0 0x1000>;
 			clocks = <&infracfg CLK_INFRA_PWM_STA>,
@@ -94,7 +106,7 @@
 			#pwm-cells = <2>;
 		};
 
-		serial@11002000 {
+		uart0: serial@11002000 {
 			compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x100>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
@@ -102,10 +114,12 @@
 			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
 				 <&infracfg CLK_INFRA_UART0_CK>;
 			clock-names = "baud", "bus";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
 			status = "disabled";
 		};
 
-		serial@11003000 {
+		uart1: serial@11003000 {
 			compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x100>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
@@ -116,7 +130,7 @@
 			status = "disabled";
 		};
 
-		serial@11004000 {
+		uart2: serial@11004000 {
 			compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x100>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
@@ -142,7 +156,7 @@
 			status = "disabled";
 		};
 
-		spi@11009000 {
+		spi2: spi@11009000 {
 			compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm";
 			reg = <0 0x11009000 0 0x1000>;
 			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
@@ -184,6 +198,31 @@
 			status = "disabled";
 		};
 
+		thermal@1100c800 {
+			compatible = "mediatek,mt7981-thermal",
+				     "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "therm", "auxadc";
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
+		auxadc: adc@1100d000 {
+			compatible = "mediatek,mt7981-auxadc",
+				     "mediatek,mt7986-auxadc";
+			reg = <0 0x1100d000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
 		pio: pinctrl@11d00000 {
 			compatible = "mediatek,mt7981-pinctrl";
 			reg = <0 0x11d00000 0 0x1000>,
@@ -204,6 +243,13 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			#interrupt-cells = <2>;
+
+			uart0_pins: uart0-pins {
+				mux {
+					function = "uart";
+					groups = "uart0";
+				};
+			};
 		};
 
 		efuse@11f20000 {
@@ -211,6 +257,14 @@
 			reg = <0 0x11f20000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			soc-uuid@140 {
+				reg = <0x140 0x10>;
+			};
+
+			thermal_calibration: thermal-calib@274 {
+				reg = <0x274 0xc>;
+			};
 		};
 
 		clock-controller@15000000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
index 08b3b0827436..30805a610262 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
@@ -98,8 +98,6 @@
 	flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <52000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
new file mode 100644
index 000000000000..f7dd52981977
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	reg_sata12v: regulator-sata12v {
+		compatible = "regulator-fixed";
+		regulator-name = "sata12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_sata5v: regulator-sata5v {
+		compatible = "regulator-fixed";
+		regulator-name = "sata5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata12v>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index ed79ad1ae871..19f538d160ab 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -42,7 +42,7 @@
 		compatible = "pwm-fan";
 		#cooling-cells = <2>;
 		/* cooling level (0, 1, 2) - pwm inverted */
-		cooling-levels = <255 96 0>;
+		cooling-levels = <255 40 0>;
 		pwms = <&pwm 0 10000>;
 		status = "okay";
 	};
@@ -64,23 +64,19 @@
 	};
 
 	/* i2c of the left SFP cage (wan) */
-	i2c_sfp1: i2c-gpio-0 {
+	i2c_sfp1: i2c-0 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 	};
 
 	/* i2c of the right SFP cage (lan) */
-	i2c_sfp2: i2c-gpio-1 {
+	i2c_sfp2: i2c-1 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 	};
 
 	leds {
@@ -204,8 +200,9 @@
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <1>;
-		interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>;
 		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 559990dcd1d1..7790601586cc 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -428,16 +428,16 @@
 			};
 		};
 
-		pcie_phy: t-phy {
+		pcie_phy: t-phy@11c00000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
-			ranges;
-			#address-cells = <2>;
-			#size-cells = <2>;
+			ranges = <0 0 0x11c00000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			status = "disabled";
 
-			pcie_port: pcie-phy@11c00000 {
-				reg = <0 0x11c00000 0 0x20000>;
+			pcie_port: pcie-phy@0 {
+				reg = <0 0x20000>;
 				clocks = <&clk40m>;
 				clock-names = "ref";
 				#phy-cells = <1>;
@@ -450,6 +450,10 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			soc-uuid@140 {
+				reg = <0x140 0x8>;
+			};
+
 			thermal_calibration: calib@274 {
 				reg = <0x274 0xc>;
 			};
@@ -523,11 +527,17 @@
 
 		eth: ethernet@15100000 {
 			compatible = "mediatek,mt7986-eth";
-			reg = <0 0x15100000 0 0x80000>;
+			reg = <0 0x15100000 0 0x40000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+					  "pdma1", "pdma2", "pdma3";
 			clocks = <&ethsys CLK_ETH_FE_EN>,
 				 <&ethsys CLK_ETH_GP2_EN>,
 				 <&ethsys CLK_ETH_GP1_EN>,
@@ -553,6 +563,7 @@
 					  <&topckgen CLK_TOP_SGM_325M_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			sram = <&eth_sram>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			mediatek,ethsys = <&ethsys>;
@@ -562,6 +573,15 @@
 			status = "disabled";
 		};
 
+		/*15100000+0x40000*/
+		eth_sram: sram@15140000 {
+			compatible = "mmio-sram";
+			reg = <0 0x15140000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x15140000 0 0x40000>;
+		};
+
 		wo_ccif0: syscon@151a5000 {
 			compatible = "mediatek,mt7986-wo-ccif", "syscon";
 			reg = <0 0x151a5000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
new file mode 100644
index 000000000000..0e41c07d3a5f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7988a-bananapi-bpi-r4.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-r4-2g5", "bananapi,bpi-r4", "mediatek,mt7988a";
+	model = "Banana Pi BPI-R4 (1x SFP+, 1x 2.5GbE)";
+	chassis-type = "embedded";
+};
+
+&gmac1 {
+	phy = <&int_2p5g_phy>;
+	phy-mode = "internal";
+	status = "okay";
+};
+
+&int_2p5g_phy {
+	pinctrl-0 = <&i2p5gbe_led0_pins>;
+	pinctrl-names = "i2p5gbe-led";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
new file mode 100644
index 000000000000..3e320b2f83d5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+};
+
+&{/soc/mmc@11230000} {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_emmc_51>;
+	pinctrl-1 = <&mmc0_pins_emmc_51>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	hs400-ds-delay = <0x12814>;
+	vqmmc-supply = <&reg_1p8v>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-4e.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-4e.dts
new file mode 100644
index 000000000000..c7ea6e88c4f4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-4e.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+
+#include "mt7988a-bananapi-bpi-r4-pro.dtsi"
+
+/ {
+	model = "Bananapi BPI-R4";
+	compatible = "bananapi,bpi-r4-pro-4e",
+		     "bananapi,bpi-r4-pro",
+		     "mediatek,mt7988a";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-8x.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-8x.dts
new file mode 100644
index 000000000000..c9a0e69e9dd5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-8x.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+
+#include "mt7988a-bananapi-bpi-r4-pro.dtsi"
+
+/ {
+	model = "Bananapi BPI-R4";
+	compatible = "bananapi,bpi-r4-pro-8x",
+		     "bananapi,bpi-r4-pro",
+		     "mediatek,mt7988a";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn15.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn15.dtso
new file mode 100644
index 000000000000..9750916042de
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn15.dtso
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/* This enables key-b slot CN15 on pcie2(11280000 1L0) on BPI-R4-Pro */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a";
+};
+
+&{/soc/pinctrl@1001f000/pcie-2-hog} {
+	output-low;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn18.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn18.dtso
new file mode 100644
index 000000000000..9830fb0fd97a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn18.dtso
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/* This enables key-b slot CN18 on pcie3(11290000 1L1) on BPI-R4-Pro */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a";
+};
+
+&{/soc/pinctrl@1001f000/pcie-3-hog} {
+	output-low;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-emmc.dtso
new file mode 100644
index 000000000000..5ed2f0a6bd66
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-emmc.dtso
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a";
+};
+
+&{/soc/mmc@11230000} {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_emmc_51>;
+	pinctrl-1 = <&mmc0_pins_emmc_51>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	hs400-ds-delay = <0x12814>;
+	vqmmc-supply = <&reg_1p8v>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-sd.dtso
new file mode 100644
index 000000000000..1ec1a9fbd8ba
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-sd.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a";
+};
+
+&{/soc/mmc@11230000} {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_sdcard>;
+	pinctrl-1 = <&mmc0_pins_sdcard>;
+	cd-gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	max-frequency = <48000000>;
+	cap-sd-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	no-mmc;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi
new file mode 100644
index 000000000000..a48132f09411
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi
@@ -0,0 +1,534 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+
+#include "mt7988a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+
+/ {
+	aliases {
+		ethernet0 = &gmac0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		/* PCA9548 (0-0070) provides 4 i2c channels */
+		i2c3 = &imux0;
+		i2c4 = &imux1_sfp1;
+		i2c5 = &imux2_sfp2;
+		i2c6 = &imux3_wifi;
+	};
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		/* cooling level (0, 1, 2, 3) : (0% duty, 30% duty, 50% duty, 100% duty) */
+		cooling-levels = <0 80 128 255>;
+		pinctrl-0 = <&pwm0_pins>;
+		pinctrl-names = "default";
+		pwms = <&pwm 0 50000>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "reset";
+			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		button-wps {
+			label = "WPS";
+			gpios = <&pio 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_red: sys-led-red {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pca9555 15 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_blue: sys-led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pca9555 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_1p8v: regulator-dvdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "DVDD1V8_SOC";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3vd {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3VD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* SFP1 cage (LAN) */
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&imux1_sfp1>;
+		los-gpios = <&pio 70 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 69 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 21 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+
+	/* SFP2 cage (WAN) */
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&imux2_sfp2>;
+		los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+};
+
+&cci {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu0 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu1 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu2 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu3 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_trip_hot: hot {
+			temperature = <120000>;
+			hysteresis = <2000>;
+			type = "hot";
+		};
+
+		cpu_trip_active_high: active-high {
+			temperature = <115000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_med: active-med {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_low: active-low {
+			temperature = <40000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map-cpu-active-high {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 3 3>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		map-cpu-active-med {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		map-cpu-active-low {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&eth {
+	pinctrl-0 = <&mdio0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&fan {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+	pwms = <&pwm 0 50000>;
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gsw_phy0 {
+	pinctrl-0 = <&gbe0_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy0_led0 {
+	color = <LED_COLOR_ID_YELLOW>;
+	status = "okay";
+};
+
+&gsw_port0 {
+	label = "mgmt";
+};
+
+/* R4Pro has only port 0 connected, so disable the others */
+&gsw_phy1 {
+	status = "disabled";
+};
+
+&gsw_port1 {
+	status = "disabled";
+};
+
+&gsw_phy2 {
+	status = "disabled";
+};
+
+&gsw_port2 {
+	status = "disabled";
+};
+
+&gsw_phy3 {
+	status = "disabled";
+};
+
+&gsw_port3 {
+	status = "disabled";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rt5190a_64: rt5190a@64 {
+		compatible = "richtek,rt5190a";
+		reg = <0x64>;
+		vin2-supply = <&rt5190_buck1>;
+		vin3-supply = <&rt5190_buck1>;
+		vin4-supply = <&rt5190_buck1>;
+
+		regulators {
+			rt5190_buck1: buck1 {
+				regulator-name = "rt5190a-buck1";
+				regulator-min-microvolt = <5090000>;
+				regulator-max-microvolt = <5090000>;
+				regulator-allowed-modes =
+				<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2 {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			rt5190_buck3: buck3 {
+				regulator-name = "vproc";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4 {
+				regulator-name = "rt5190a-buck4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes =
+				<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo {
+				regulator-name = "rt5190a-ldo";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9545: i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: i2c-gpio-expander@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+			};
+		};
+
+		imux1_sfp1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux2_sfp2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux3_wifi: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* mPCIe SIM2 (11300000) */
+&pcie0 {
+	status = "okay";
+};
+
+/* mPCIe (11310000 near leds) SIM3 */
+&pcie1 {
+	status = "okay";
+};
+
+/* M.2 (11280000) 1L0 key-m SSD1 CN13 / key-b SIM1 CN15 */
+&pcie2 {
+	status = "okay";
+};
+
+/* M.2 (11290000) 1L1 key-m SSD2 CN14 / key-b SIM2 CN18 */
+&pcie3 {
+	status = "okay";
+};
+
+&pio {
+	gbe0_led0_pins: gbe0-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe0_led0";
+		};
+	};
+
+	i2c0_pins: i2c0-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c0_1";
+		};
+	};
+
+	i2c1_pins: i2c1-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c1_0";
+		};
+	};
+
+	i2c2_1_pins: i2c2-g1-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c2_1";
+		};
+	};
+
+	mdio0_pins: mdio0-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio0";
+		};
+
+		conf {
+			pins = "SMI_0_MDC", "SMI_0_MDIO";
+			drive-strength = <8>;
+		};
+	};
+
+	mmc0_pins_emmc_51: mmc0-emmc-51-pins {
+		mux {
+			function = "flash";
+			groups = "emmc_51";
+		};
+	};
+
+	mmc0_pins_sdcard: mmc0-sdcard-pins {
+		mux {
+			function = "flash";
+			groups = "sdcard";
+		};
+	};
+
+	/* 1L0 0=key-b (CN15), 1=key-m (CN13) */
+	pcie-2-hog {
+		gpio-hog;
+		gpios = <79 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	/* 1L1 0=key-b (CN18), 1=key-m (CN14) */
+	pcie-3-hog {
+		gpio-hog;
+		gpios = <63 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	pwm0_pins: pwm0-pins {
+		mux {
+			groups = "pwm0";
+			function = "pwm";
+		};
+	};
+
+	spi0_flash_pins: spi0-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_flash_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi_nand: nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&spi_nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x0 0x200000>;
+			label = "bl2";
+		};
+
+		partition@200000 {
+			compatible = "linux,ubi";
+			reg = <0x200000 0xfe00000>;
+			label = "ubi";
+		};
+	};
+};
+
+/* back USB */
+&ssusb0 {
+	/* Use U2P only instead of both U3P/U2P due to U3P serdes shared with pcie2 */
+	phys = <&xphyu2port0 PHY_TYPE_USB2>;
+	mediatek,u3p-dis-msk = <1>;
+	status = "okay";
+};
+
+/* front USB */
+&ssusb1 {
+	status = "okay";
+};
+
+&switch {
+	dsa,member = <1 0>;
+	status = "okay";
+};
+
+&tphy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&xsphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
new file mode 100644
index 000000000000..663c6345dd31
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+};
+
+&{/soc/mmc@11230000} {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_sdcard>;
+	pinctrl-1 = <&mmc0_pins_sdcard>;
+	cd-gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	max-frequency = <52000000>;
+	cap-sd-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	no-mmc;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
index efc4ad0b08b8..4b3796ba82e3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -2,10 +2,37 @@
 
 /dts-v1/;
 
-#include "mt7988a.dtsi"
+#include "mt7988a-bananapi-bpi-r4.dtsi"
 
 / {
 	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
-	model = "Banana Pi BPI-R4";
+	model = "Banana Pi BPI-R4 (2x SFP+)";
 	chassis-type = "embedded";
+
+	/* SFP2 cage (LAN) */
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		maximum-power-milliwatt = <3000>;
+
+		los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 83 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gmac1 {
+	managed = "in-band-status";
+	phy-mode = "usxgmii";
+	sfp = <&sfp2>;
+};
+
+&pca9545 {
+	i2c_sfp2: i2c@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <2>;
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
new file mode 100644
index 000000000000..0ff69dae45d3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7988a.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		/* cooling level (0, 1, 2, 3) : (0% duty, 30% duty, 50% duty, 100% duty) */
+		cooling-levels = <0 80 128 255>;
+		#cooling-cells = <2>;
+		pwms = <&pwm 0 50000>;
+		status = "okay";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_green: led-green {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 79 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_blue: led-blue {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 63 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* SFP1 cage (WAN) */
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		maximum-power-milliwatt = <3000>;
+
+		los-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 70 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cci {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu0 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu1 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu2 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu3 {
+	proc-supply = <&rt5190_buck3>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_trip_hot: hot {
+			temperature = <120000>;
+			hysteresis = <2000>;
+			type = "hot";
+		};
+
+		cpu_trip_active_high: active-high {
+			temperature = <115000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_med: active-med {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_low: active-low {
+			temperature = <40000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map-cpu-active-high {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 3 3>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		map-cpu-active-med {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		map-cpu-active-low {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&gmac2 {
+	managed = "in-band-status";
+	phy-mode = "usxgmii";
+	sfp = <&sfp1>;
+};
+
+&gsw_phy0 {
+	pinctrl-0 = <&gbe0_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy0_led0 {
+	function = LED_FUNCTION_WAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port0 {
+	label = "wan";
+};
+
+&gsw_phy1 {
+	pinctrl-0 = <&gbe1_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy1_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port1 {
+	label = "lan1";
+};
+
+&gsw_phy2 {
+	pinctrl-0 = <&gbe2_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy2_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port2 {
+	label = "lan2";
+};
+
+&gsw_phy3 {
+	pinctrl-0 = <&gbe3_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy3_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port3 {
+	label = "lan3";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	rt5190a_64: rt5190a@64 {
+		compatible = "richtek,rt5190a";
+		reg = <0x64>;
+		vin2-supply = <&rt5190_buck1>;
+		vin3-supply = <&rt5190_buck1>;
+		vin4-supply = <&rt5190_buck1>;
+
+		regulators {
+			rt5190_buck1: buck1 {
+				regulator-name = "rt5190a-buck1";
+				regulator-min-microvolt = <5090000>;
+				regulator-max-microvolt = <5090000>;
+				regulator-allowed-modes =
+				<RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			buck2 {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			rt5190_buck3: buck3 {
+				regulator-name = "vproc";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+			};
+			buck4 {
+				regulator-name = "rt5190a-buck4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes =
+				<RT5190A_OPMODE_AUTO>, <RT5190A_OPMODE_FPWM>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			ldo {
+				regulator-name = "rt5190a-ldo";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_1_pins>;
+	status = "okay";
+
+	pca9545: i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pcf8563: rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+				#clock-cells = <0>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+				size = <256>;
+			};
+
+		};
+
+		i2c_sfp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+/* mPCIe SIM2 */
+&pcie0 {
+	status = "okay";
+};
+
+/* mPCIe SIM3 */
+&pcie1 {
+	status = "okay";
+};
+
+/* M.2 key-B SIM1 */
+&pcie2 {
+	status = "okay";
+};
+
+/* M.2 key-M SSD */
+&pcie3 {
+	status = "okay";
+};
+
+&pio {
+	i2c0_pins: i2c0-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c0_1";
+		};
+	};
+
+	i2c1_pins: i2c1-g0-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c1_0";
+		};
+	};
+
+	i2c2_1_pins: i2c2-g1-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c2_1";
+		};
+	};
+
+	gbe0_led0_pins: gbe0-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe0_led0";
+		};
+	};
+
+	gbe1_led0_pins: gbe1-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe1_led0";
+		};
+	};
+
+	gbe2_led0_pins: gbe2-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe2_led0";
+		};
+	};
+
+	gbe3_led0_pins: gbe3-led0-pins {
+		mux {
+			function = "led";
+			groups = "gbe3_led0";
+		};
+	};
+
+	i2p5gbe_led0_pins: 2p5gbe-led0-pins {
+		mux {
+			function = "led";
+			groups = "2p5gbe_led0";
+		};
+	};
+
+	mmc0_pins_emmc_45: mmc0-emmc-45-pins {
+		mux {
+			function = "flash";
+			groups = "emmc_45";
+		};
+	};
+
+	mmc0_pins_emmc_51: mmc0-emmc-51-pins {
+		mux {
+			function = "flash";
+			groups = "emmc_51";
+		};
+	};
+
+	mmc0_pins_sdcard: mmc0-sdcard-pins {
+		mux {
+			function = "flash";
+			groups = "sdcard";
+		};
+	};
+
+	spi0_flash_pins: spi0-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	status = "okay";
+
+	spi_nand: flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&spi_nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bl2";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+	};
+};
+
+&ssusb1 {
+	status = "okay";
+};
+
+&tphy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&xsphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index c9649b815276..bec590d26659 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -3,6 +3,8 @@
 #include <dt-bindings/clock/mediatek,mt7988-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+#include <dt-bindings/reset/mediatek,mt7988-resets.h>
 
 / {
 	compatible = "mediatek,mt7988a";
@@ -10,36 +12,107 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	cci: cci {
+		compatible = "mediatek,mt7988-cci", "mediatek,mt8183-cci";
+		clocks = <&mcusys CLK_MCU_BUS_DIV_SEL>,
+			 <&topckgen CLK_TOP_XTAL>;
+		clock-names = "cci", "intermediate";
+		operating-points-v2 = <&cci_opp>;
+	};
+
+	cci_opp: opp-table-cci {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-660000000 {
+			opp-hz = /bits/ 64 <660000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-1080000000 {
+			opp-hz = /bits/ 64 <1080000000>;
+			opp-microvolt = <900000>;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a73";
 			reg = <0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a73";
 			reg = <0x1>;
 			device_type = "cpu";
 			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a73";
 			reg = <0x2>;
 			device_type = "cpu";
 			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a73";
 			reg = <0x3>;
 			device_type = "cpu";
 			enable-method = "psci";
+			clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
+				 <&topckgen CLK_TOP_XTAL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			mediatek,cci = <&cci>;
+		};
+
+		cluster0_opp: opp-table-0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <850000>;
+			};
+			opp-1100000000 {
+				opp-hz = /bits/ 64 <1100000000>;
+				opp-microvolt = <850000>;
+			};
+			opp-1500000000 {
+				opp-hz = /bits/ 64 <1500000000>;
+				opp-microvolt = <850000>;
+			};
+			opp-1800000000 {
+				opp-hz = /bits/ 64 <1800000000>;
+				opp-microvolt = <900000>;
+			};
 		};
 	};
 
@@ -61,6 +134,18 @@
 		method = "smc";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 320 KiB reserved for ARM Trusted Firmware (BL31 and BL32) */
+		secmon@43000000 {
+			reg = <0 0x43000000 0 0x50000>;
+			no-map;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		ranges;
@@ -84,6 +169,7 @@
 			compatible = "mediatek,mt7988-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		topckgen: clock-controller@1001b000 {
@@ -99,13 +185,80 @@
 			#reset-cells = <1>;
 		};
 
-		clock-controller@1001e000 {
+		apmixedsys: clock-controller@1001e000 {
 			compatible = "mediatek,mt7988-apmixedsys";
 			reg = <0 0x1001e000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		pwm@10048000 {
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7988-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c10000 0 0x1000>,
+			      <0 0x11d00000 0 0x1000>,
+			      <0 0x11d20000 0 0x1000>,
+			      <0 0x11e00000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_tr",
+				    "iocfg_br", "iocfg_rb",
+				    "iocfg_lb", "iocfg_tl", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 84>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+
+			pcie0_pins: pcie0-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0",
+						 "pcie_wake_n0_0";
+				};
+			};
+
+			pcie1_pins: pcie1-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_2l_1_pereset", "pcie_clk_req_n1",
+						 "pcie_wake_n1_0";
+				};
+			};
+
+			pcie2_pins: pcie2-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_1l_0_pereset", "pcie_clk_req_n2_0",
+						 "pcie_wake_n2_0";
+				};
+			};
+
+			pcie3_pins: pcie3-pins {
+				mux {
+					function = "pcie";
+					groups = "pcie_1l_1_pereset", "pcie_clk_req_n3",
+						 "pcie_wake_n3_0";
+				};
+			};
+
+			spi1_pins: spi1-pins {
+				mux {
+					function = "spi";
+					groups = "spi1";
+				};
+			};
+
+			uart0_pins: uart0-pins {
+				mux {
+					function = "uart";
+					groups =  "uart0";
+				};
+			};
+		};
+
+		pwm: pwm@10048000 {
 			compatible = "mediatek,mt7988-pwm";
 			reg = <0 0x10048000 0 0x1000>;
 			clocks = <&infracfg CLK_INFRA_66M_PWM_BCK>,
@@ -124,7 +277,13 @@
 			status = "disabled";
 		};
 
-		serial@11000000 {
+		mcusys: mcusys@100e0000 {
+			compatible = "mediatek,mt7988-mcusys", "syscon";
+			reg = <0 0x100e0000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		serial0: serial@11000000 {
 			compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
 			reg = <0 0x11000000 0 0x100>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
@@ -132,6 +291,8 @@
 			clocks = <&topckgen CLK_TOP_UART_SEL>,
 				 <&infracfg CLK_INFRA_52M_UART0_CK>;
 			clock-names = "baud", "bus";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
 			status = "disabled";
 		};
 
@@ -157,11 +318,12 @@
 			status = "disabled";
 		};
 
-		i2c@11003000 {
+		i2c0: i2c@11003000 {
 			compatible = "mediatek,mt7981-i2c";
 			reg = <0 0x11003000 0 0x1000>,
 			      <0 0x10217080 0 0x80>;
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
 			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
 				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
 			clock-names = "main", "dma";
@@ -170,11 +332,12 @@
 			status = "disabled";
 		};
 
-		i2c@11004000 {
+		i2c1: i2c@11004000 {
 			compatible = "mediatek,mt7981-i2c";
 			reg = <0 0x11004000 0 0x1000>,
 			      <0 0x10217100 0 0x80>;
 			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
 			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
 				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
 			clock-names = "main", "dma";
@@ -183,11 +346,12 @@
 			status = "disabled";
 		};
 
-		i2c@11005000 {
+		i2c2: i2c@11005000 {
 			compatible = "mediatek,mt7981-i2c";
 			reg = <0 0x11005000 0 0x1000>,
 			      <0 0x10217180 0 0x80>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <1>;
 			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
 				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
 			clock-names = "main", "dma";
@@ -196,7 +360,65 @@
 			status = "disabled";
 		};
 
-		usb@11190000 {
+		spi0: spi@11007000 {
+			compatible = "mediatek,mt7988-spi-quad", "mediatek,spi-ipm";
+			reg = <0 0x11007000 0 0x100>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI0>,
+				 <&infracfg CLK_INFRA_66M_SPI0_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@11008000 {
+			compatible = "mediatek,mt7988-spi-single", "mediatek,spi-ipm";
+			reg = <0 0x11008000 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI1>,
+				 <&infracfg CLK_INFRA_66M_SPI1_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			status = "disabled";
+		};
+
+		spi2: spi@11009000 {
+			compatible = "mediatek,mt7988-spi-quad", "mediatek,spi-ipm";
+			reg = <0 0x11009000 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_104M_SPI2_BCK>,
+				 <&infracfg CLK_INFRA_66M_SPI2_HCK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk",
+				      "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		lvts: lvts@1100a000 {
+			compatible = "mediatek,mt7988-lvts-ap";
+			#thermal-sensor-cells = <1>;
+			reg = <0 0x1100a000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT7988_INFRA_RST1_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_calibration>;
+			nvmem-cell-names = "lvts-calib-data-1";
+		};
+
+		ssusb0: usb@11190000 {
 			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
 			reg = <0 0x11190000 0 0x2e00>,
 			      <0 0x11193e00 0 0x0100>;
@@ -208,9 +430,12 @@
 				 <&infracfg CLK_INFRA_133M_USB_HCK>,
 				 <&infracfg CLK_INFRA_USB_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			phys = <&xphyu2port0 PHY_TYPE_USB2>,
+			       <&xphyu3port0 PHY_TYPE_USB3>;
+			status = "disabled";
 		};
 
-		usb@11200000 {
+		ssusb1: usb@11200000 {
 			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
 			reg = <0 0x11200000 0 0x2e00>,
 			      <0 0x11203e00 0 0x0100>;
@@ -222,9 +447,261 @@
 				 <&infracfg CLK_INFRA_133M_USB_HCK_CK_P1>,
 				 <&infracfg CLK_INFRA_USB_XHCI_CK_P1>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			phys = <&tphyu2port0 PHY_TYPE_USB2>,
+			       <&tphyu3port0 PHY_TYPE_USB3>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt7988-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11D60000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_MSDC400>,
+				 <&infracfg CLK_INFRA_MSDC2_HCK>,
+				 <&infracfg CLK_INFRA_66M_MSDC_0_HCK>,
+				 <&infracfg CLK_INFRA_133M_MSDC_0_HCK>;
+			assigned-clocks = <&topckgen CLK_TOP_EMMC_250M_SEL>,
+					  <&topckgen CLK_TOP_EMMC_400M_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_NET1PLL_D5_D2>,
+						 <&apmixedsys CLK_APMIXED_MSDCPLL>;
+			clock-names = "source", "hclk", "axi_cg", "ahb_cg";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie2: pcie@11280000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11280000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <3>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x20200000 0x00
+				  0x20200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P2>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P2>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P2>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P2>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie2_pins>;
+			status = "disabled";
+
+			phys = <&xphyu3port0 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc2 0>,
+					<0 0 0 2 &pcie_intc2 1>,
+					<0 0 0 3 &pcie_intc2 2>,
+					<0 0 0 4 &pcie_intc2 3>;
+			pcie_intc2: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie3: pcie@11290000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11290000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <2>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x28000000 0x00
+				  0x28000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x28200000 0x00
+				  0x28200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P3>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P3>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P3>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P3>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie3_pins>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc3 0>,
+					<0 0 0 2 &pcie_intc3 1>,
+					<0 0 0 3 &pcie_intc3 2>,
+					<0 0 0 4 &pcie_intc3 3>;
+			pcie_intc3: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie0: pcie@11300000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11300000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <0>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x30000000 0x00
+				  0x30000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x30200000 0x00
+				  0x30200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P0>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P0>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P0>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P0>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_pins>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			pcie_intc0: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie1: pcie@11310000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x11310000 0 0x2000>;
+			reg-names = "pcie-mac";
+			linux,pci-domain = <1>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0x00 0x38000000 0x00
+				  0x38000000 0x00 0x00200000>,
+				 <0x82000000 0x00 0x38200000 0x00
+				  0x38200000 0x00 0x07e00000>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P1>,
+				 <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P1>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P1>,
+				 <&infracfg CLK_INFRA_133M_PCIE_CK_P1>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m",
+				      "top_133m";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_pins>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		tphy: t-phy@11c50000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			tphyu2port0: usb-phy@11c50000 {
+				reg = <0 0x11c50000 0 0x700>;
+				clocks = <&infracfg CLK_INFRA_USB_UTMI_CK_P1>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			tphyu3port0: usb-phy@11c50700 {
+				reg = <0 0x11c50700 0 0x900>;
+				clocks = <&infracfg CLK_INFRA_USB_PIPE_CK_P1>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+
+		topmisc: system-controller@11d10084 {
+			compatible = "mediatek,mt7988-topmisc",
+				     "syscon";
+			reg = <0 0x11d10084 0 0xff80>;
+		};
+
+		xsphy: xs-phy@11e10000 {
+			compatible = "mediatek,mt7988-xsphy",
+				     "mediatek,xsphy";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			xphyu2port0: usb-phy@11e10000 {
+				reg = <0 0x11e10000 0 0x400>;
+				clocks = <&infracfg CLK_INFRA_USB_UTMI>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			xphyu3port0: usb-phy@11e13000 {
+				reg = <0 0x11e13400 0 0x500>;
+				clocks = <&infracfg CLK_INFRA_USB_PIPE>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,syscon-type = <&topmisc 0x194 0>;
+			};
+		};
+
+		xfi_tphy0: phy@11f20000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f20000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 14>;
+			mediatek,usxgmii-performance-errata;
+			#phy-cells = <0>;
 		};
 
-		clock-controller@11f40000 {
+		xfi_tphy1: phy@11f30000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f30000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_1_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 15>;
+			#phy-cells = <0>;
+		};
+
+		xfi_pll: clock-controller@11f40000 {
 			compatible = "mediatek,mt7988-xfi-pll";
 			reg = <0 0x11f40000 0 0x1000>;
 			resets = <&watchdog 16>;
@@ -236,21 +713,319 @@
 			reg = <0 0x11f50000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			soc-uuid@140 {
+				reg = <0x140 0x10>;
+			};
+
+			lvts_calibration: calib@918 {
+				reg = <0x918 0x28>;
+			};
+
+			phy_calibration_p0: calib@940 {
+				reg = <0x940 0x10>;
+			};
+
+			phy_calibration_p1: calib@954 {
+				reg = <0x954 0x10>;
+			};
+
+			phy_calibration_p2: calib@968 {
+				reg = <0x968 0x10>;
+			};
+
+			phy_calibration_p3: calib@97c {
+				reg = <0x97c 0x10>;
+			};
 		};
 
-		clock-controller@15000000 {
+		ethsys: clock-controller@15000000 {
 			compatible = "mediatek,mt7988-ethsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		clock-controller@15031000 {
+		switch: switch@15020000 {
+			compatible = "mediatek,mt7988-switch";
+			reg = <0 0x15020000 0 0x8000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ethwarp MT7988_ETHWARP_RST_SWITCH>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gsw_port0: port@0 {
+					reg = <0>;
+					phy-handle = <&gsw_phy0>;
+					phy-mode = "internal";
+				};
+
+				gsw_port1: port@1 {
+					reg = <1>;
+					phy-handle = <&gsw_phy1>;
+					phy-mode = "internal";
+				};
+
+				gsw_port2: port@2 {
+					reg = <2>;
+					phy-handle = <&gsw_phy2>;
+					phy-mode = "internal";
+				};
+
+				gsw_port3: port@3 {
+					reg = <3>;
+					phy-handle = <&gsw_phy3>;
+					phy-mode = "internal";
+				};
+
+				port@6 {
+					reg = <6>;
+					ethernet = <&gmac0>;
+					phy-mode = "internal";
+
+					fixed-link {
+						speed = <10000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mediatek,pio = <&pio>;
+
+				gsw_phy0: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0>;
+					interrupts = <0>;
+					nvmem-cells = <&phy_calibration_p0>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy0_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy0_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy1: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+					interrupts = <1>;
+					nvmem-cells = <&phy_calibration_p1>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy1_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy1_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy2: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+					interrupts = <2>;
+					nvmem-cells = <&phy_calibration_p2>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy2_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy2_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy3: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+					interrupts = <3>;
+					nvmem-cells = <&phy_calibration_p3>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy3_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy3_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+			};
+		};
+
+		ethwarp: clock-controller@15031000 {
 			compatible = "mediatek,mt7988-ethwarp";
 			reg = <0 0x15031000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
+
+		eth: ethernet@15100000 {
+			compatible = "mediatek,mt7988-eth";
+			reg = <0 0x15100000 0 0x40000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+					  "pdma1", "pdma2", "pdma3";
+			clocks = <&ethsys CLK_ETHDMA_CRYPT0_EN>,
+				 <&ethsys CLK_ETHDMA_FE_EN>,
+				 <&ethsys CLK_ETHDMA_GP2_EN>,
+				 <&ethsys CLK_ETHDMA_GP1_EN>,
+				 <&ethsys CLK_ETHDMA_GP3_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU2_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU1_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU0_EN>,
+				 <&ethsys CLK_ETHDMA_ESW_EN>,
+				 <&topckgen CLK_TOP_ETH_GMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_REFCK_50M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_200M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_SEL>,
+				 <&topckgen CLK_TOP_ETH_XGMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_MII_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_500M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PAO_2X_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SYNC_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PPEFB_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_WARP_SEL>,
+				 <&ethsys CLK_ETHDMA_XGP1_EN>,
+				 <&ethsys CLK_ETHDMA_XGP2_EN>,
+				 <&ethsys CLK_ETHDMA_XGP3_EN>;
+			clock-names = "crypto", "fe", "gp2", "gp1", "gp3",
+				      "ethwarp_wocpu2", "ethwarp_wocpu1",
+				      "ethwarp_wocpu0", "esw", "top_eth_gmii_sel",
+				      "top_eth_refck_50m_sel", "top_eth_sys_200m_sel",
+				      "top_eth_sys_sel", "top_eth_xgmii_sel",
+				      "top_eth_mii_sel", "top_netsys_sel",
+				      "top_netsys_500m_sel", "top_netsys_pao_2x_sel",
+				      "top_netsys_sync_250m_sel",
+				      "top_netsys_ppefb_250m_sel",
+				      "top_netsys_warp_sel","xgp1", "xgp2", "xgp3";
+			assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+					  <&topckgen CLK_TOP_NETSYS_GSW_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_1_SEL>,
+					  <&topckgen CLK_TOP_SGM_0_SEL>,
+					  <&topckgen CLK_TOP_SGM_1_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			sram = <&eth_sram>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,infracfg = <&topmisc>;
+
+			gmac0: mac@0 {
+				compatible = "mediatek,eth-mac";
+				reg = <0>;
+				phy-mode = "internal";
+
+				/* Connected to internal switch */
+				fixed-link {
+					speed = <10000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+			gmac1: mac@1 {
+				compatible = "mediatek,eth-mac";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			gmac2: mac@2 {
+				compatible = "mediatek,eth-mac";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mdio_bus: mdio-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* internal 2.5G PHY */
+				int_2p5g_phy: ethernet-phy@15 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <15>;
+					status = "disabled";
+				};
+			};
+		};
+
+		eth_sram: sram@15400000 {
+			compatible = "mmio-sram";
+			reg = <0 0x15400000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x15400000 0 0x200000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&lvts 0>;
+			trips {
+				cpu_trip_crit: crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index eee64461421f..0d995b342d46 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -925,13 +925,11 @@
 &pwrap {
 	pmic: pmic {
 		compatible = "mediatek,mt6397";
-		#address-cells = <1>;
-		#size-cells = <1>;
 		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		clock: mt6397clock {
+		clock: clocks {
 			compatible = "mediatek,mt6397-clk";
 			#clock-cells = <1>;
 		};
@@ -942,11 +940,10 @@
 			#gpio-cells = <2>;
 		};
 
-		regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -956,7 +953,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -966,7 +962,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -975,7 +970,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -984,7 +978,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -993,7 +986,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -1002,7 +994,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -1011,7 +1002,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -1020,18 +1010,15 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1039,18 +1026,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -1058,7 +1042,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -1066,7 +1049,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -1074,7 +1056,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1082,7 +1063,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1090,7 +1070,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -1098,7 +1077,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -1106,7 +1084,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -1114,7 +1091,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1123,7 +1099,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
@@ -1131,7 +1106,7 @@
 			};
 		};
 
-		rtc: mt6397rtc {
+		rtc: rtc {
 			compatible = "mediatek,mt6397-rtc";
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index bb4671c18e3b..9fffed0ef4bf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -307,11 +307,10 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		mt6397regulator: mt6397regulator {
+		regulators {
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -320,7 +319,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -329,7 +327,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -338,7 +335,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -347,7 +343,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -356,7 +351,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -365,7 +359,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -374,7 +367,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -383,19 +375,16 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 				regulator-always-on;
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <2800000>;
@@ -403,18 +392,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -422,7 +408,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -430,7 +415,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -438,7 +422,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1220000>;
 				regulator-max-microvolt = <3300000>;
@@ -446,7 +429,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
@@ -454,7 +436,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -462,7 +443,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -470,7 +450,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -478,7 +457,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -486,7 +464,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 3458be7f7f61..122a57c3780b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -318,6 +318,14 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
 		vpu_dma_reserved: vpu-dma-mem@b7000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xb7000000 0 0x500000>;
@@ -352,14 +360,14 @@
 			#clock-cells = <1>;
 		};
 
-		infracfg: power-controller@10001000 {
+		infracfg: clock-controller@10001000 {
 			compatible = "mediatek,mt8173-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		pericfg: power-controller@10003000 {
+		pericfg: clock-controller@10003000 {
 			compatible = "mediatek,mt8173-pericfg", "syscon";
 			reg = <0 0x10003000 0 0x1000>;
 			#clock-cells = <1>;
@@ -564,7 +572,7 @@
 			memory-region = <&vpu_dma_reserved>;
 		};
 
-		sysirq: intpol-controller@10200620 {
+		sysirq: interrupt-controller@10200620 {
 			compatible = "mediatek,mt8173-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
@@ -887,6 +895,7 @@
 					  <&topckgen CLK_TOP_AUD_2_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_APLL1>,
 						 <&topckgen CLK_TOP_APLL2>;
+			memory-region = <&afe_dma_mem>;
 		};
 
 		mmc0: mmc@11230000 {
@@ -1255,8 +1264,7 @@
 		};
 
 		pwm0: pwm@1401e000 {
-			compatible = "mediatek,mt8173-disp-pwm",
-				     "mediatek,mt6595-disp-pwm";
+			compatible = "mediatek,mt8173-disp-pwm";
 			reg = <0 0x1401e000 0 0x1000>;
 			#pwm-cells = <2>;
 			clocks = <&mmsys CLK_MM_DISP_PWM026M>,
@@ -1266,8 +1274,7 @@
 		};
 
 		pwm1: pwm@1401f000 {
-			compatible = "mediatek,mt8173-disp-pwm",
-				     "mediatek,mt6595-disp-pwm";
+			compatible = "mediatek,mt8173-disp-pwm";
 			reg = <0 0x1401f000 0 0x1000>;
 			#pwm-cells = <2>;
 			clocks = <&mmsys CLK_MM_DISP_PWM126M>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
index 586eee79c73c..f69ffcb9792a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -39,8 +39,8 @@
 };
 
 &pio {
-	da7219_pins: da7219_pins {
-		pins1 {
+	da7219_pins: da7219-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO165__FUNC_GPIO165>;
 			input-enable;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
index 548e22c194a2..c4aedf8cbfcd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -17,7 +17,7 @@
 };
 
 &pio {
-	ts3a227e_pins: ts3a227e_pins {
+	ts3a227e_pins: ts3a227e-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO157__FUNC_GPIO157>;
 			input-enable;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
index 65860b33c01f..7bc7c2687d6f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -14,16 +14,17 @@
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
+	vccio-supply = <&pp1800_alw>;
+};
+
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
 };
 
 &qca_wifi {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
index 72852b760038..863f3e403de8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -27,16 +27,12 @@
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
 };
 
 &qca_wifi {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
index 757d0afd14fb..e0a583ce4a0b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -14,16 +14,12 @@
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
 };
 
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
index 6641b087e7c5..7874c9a20e12 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -14,16 +14,12 @@
 };
 
 &touchscreen {
-	status = "okay";
+	compatible = "elan,ekth6a12nay";
 
-	compatible = "hid-over-i2c";
-	reg = <0x10>;
-	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
+	vcc33-supply = <&pp3300_alw>;
 };
 
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
index e8241587949b..561770fcf69e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
@@ -12,3 +12,18 @@
 	chassis-type = "laptop";
 	compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
index 76d33540166f..c942e461a177 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
@@ -6,6 +6,21 @@
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi.dtsi"
 
+&i2c0 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
 &i2c2 {
 	trackpad@2c {
 		compatible = "hid-over-i2c";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 49e053b932e7..1b74ec171c10 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -39,8 +39,6 @@
 	pp3300_panel: pp3300-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_panel";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pp3300_panel_pins>;
 
@@ -95,11 +93,6 @@
 	};
 };
 
-&dsi0 {
-	status = "okay";
-	/delete-node/panel@0;
-};
-
 &dsi_out {
 	remote-endpoint = <&anx7625_in>;
 };
@@ -397,14 +390,14 @@
 		"",
 		"";
 
-	pp1000_mipibrdg_en: pp1000-mipibrdg-en {
+	pp1000_mipibrdg_en: pp1000-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
 			output-low;
 		};
 	};
 
-	pp1800_mipibrdg_en: pp1800-mipibrdg-en {
+	pp1800_mipibrdg_en: pp1800-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
@@ -412,20 +405,20 @@
 	};
 
 	pp3300_panel_pins: pp3300-panel-pins {
-		panel_3v3_enable: panel-3v3-enable {
+		panel_3v3_enable: pins-panel-en {
 			pinmux = <PINMUX_GPIO35__FUNC_GPIO35>;
 			output-low;
 		};
 	};
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
@@ -446,27 +439,27 @@
 	};
 
 	touchscreen_pins: touchscreen-pins {
-		touch-int-odl {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch-rst-l {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 			output-high;
 		};
 	};
 
 	trackpad_pins: trackpad-pins {
-		trackpad-int {
+		pins-intn {
 			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
 			input-enable;
 			bias-disable; /* pulled externally */
 		};
 	};
 
-	pp3300_mipibrdg_en: pp3300-mipibrdg-en {
+	pp3300_mipibrdg_en: pp3300-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
 			output-low;
@@ -474,13 +467,13 @@
 	};
 
 	volume_button_pins: volume-button-pins {
-		voldn-btn-odl {
+		pins-voldn {
 			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		volup-btn-odl {
+		pins-volup {
 			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
 			input-enable;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index ff02f63bac29..d71972c94e42 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -61,6 +61,33 @@
 	firmware-name = "nvm_00440302_i2s_eu.bin";
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
 &i2c0 {
 	status = "okay";
 };
@@ -304,35 +331,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	open_touch: open_touch {
-		irq_pin {
+	open_touch: opentouch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		rst_pin {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
@@ -349,8 +376,8 @@
 		};
 	};
 
-	pen_eject: peneject {
-		pen_eject {
+	pen_eject: pen-pins {
+		pins-eject {
 			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
 			input-enable;
 			/* External pull-up. */
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index da6e767b4cee..b702ff066636 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -42,6 +42,34 @@
 	};
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -292,35 +320,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	touch_default: touchdefault {
-		pin_irq {
+	touch_default: touch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch_pin_reset: pin_reset {
+		touch_pin_reset: pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index 8b56b8564ed7..b6cfcafd8b06 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -45,6 +45,34 @@
 	firmware-name = "nvm_00440302_i2s_eu.bin";
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -296,35 +324,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	open_touch: open_touch {
-		irq_pin {
+	open_touch: opentouch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		rst_pin {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 4b974bb781b1..4b87d4940c8c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -85,6 +85,13 @@
 		#size-cells = <2>;
 		ranges;
 
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
 		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
@@ -105,6 +112,7 @@
 
 	btsco: bt-sco {
 		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
 	};
 
 	wifi_pwrseq: wifi-pwrseq {
@@ -198,6 +206,10 @@
 	};
 };
 
+&afe {
+	memory-region = <&afe_dma_mem>;
+};
+
 &auxadc {
 	status = "okay";
 };
@@ -240,38 +252,6 @@
 
 &dsi0 {
 	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	panel: panel@0 {
-		/* compatible will be set in board dts */
-		reg = <0>;
-		enable-gpios = <&pio 45 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_pins_default>;
-		avdd-supply = <&ppvarn_lcd>;
-		avee-supply = <&ppvarp_lcd>;
-		pp1800-supply = <&pp1800_lcd>;
-		backlight = <&backlight_lcd0>;
-		rotation = <270>;
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-
-	ports {
-		port {
-			dsi_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&dpi0 {
-	/* TODO Re-enable after DP to Type-C port muxing can be described */
-	status = "disabled";
 };
 
 &gic {
@@ -432,7 +412,7 @@
 };
 
 &pio {
-	aud_pins_default: audiopins {
+	aud_pins_default: audio-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
 				<PINMUX_GPIO98__FUNC_I2S2_BCK>,
@@ -454,7 +434,7 @@
 		};
 	};
 
-	aud_pins_tdm_out_on: audiotdmouton {
+	aud_pins_tdm_out_on: audio-tdmout-on-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
 				<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
@@ -466,7 +446,7 @@
 		};
 	};
 
-	aud_pins_tdm_out_off: audiotdmoutoff {
+	aud_pins_tdm_out_off: audio-tdmout-off-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
 				<PINMUX_GPIO170__FUNC_GPIO170>,
@@ -487,22 +467,22 @@
 		};
 	};
 
-	ec_ap_int_odl: ec-ap-int-odl {
-		pins1 {
+	ec_ap_int_odl: ec-ap-int-odl-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
 			input-enable;
 			bias-pull-up;
 		};
 	};
 
-	h1_int_od_l: h1-int-od-l {
-		pins1 {
+	h1_int_od_l: h1-int-od-l-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
 			input-enable;
 		};
 	};
 
-	i2c0_pins: i2c0 {
+	i2c0_pins: i2c0-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
@@ -510,7 +490,7 @@
 		};
 	};
 
-	i2c1_pins: i2c1 {
+	i2c1_pins: i2c1-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
@@ -518,7 +498,7 @@
 		};
 	};
 
-	i2c2_pins: i2c2 {
+	i2c2_pins: i2c2-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
@@ -526,7 +506,7 @@
 		};
 	};
 
-	i2c3_pins: i2c3 {
+	i2c3_pins: i2c3-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
@@ -534,7 +514,7 @@
 		};
 	};
 
-	i2c4_pins: i2c4 {
+	i2c4_pins: i2c4-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
@@ -542,7 +522,7 @@
 		};
 	};
 
-	i2c5_pins: i2c5 {
+	i2c5_pins: i2c5-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
@@ -550,7 +530,7 @@
 		};
 	};
 
-	i2c6_pins: i2c6 {
+	i2c6_pins: i2c6-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
 				 <PINMUX_GPIO12__FUNC_SDA6>;
@@ -558,7 +538,7 @@
 		};
 	};
 
-	mmc0_pins_default: mmc0-pins-default {
+	mmc0_pins_default: mmc0-default-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
@@ -577,7 +557,7 @@
 		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins-rst {
@@ -606,13 +586,13 @@
 		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins-ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins-rst {
@@ -622,7 +602,7 @@
 		};
 	};
 
-	mmc1_pins_default: mmc1-pins-default {
+	mmc1_pins_default: mmc1-default-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
@@ -630,17 +610,17 @@
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 	};
 
-	mmc1_pins_uhs: mmc1-pins-uhs {
+	mmc1_pins_uhs: mmc1-uhs-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
@@ -649,26 +629,26 @@
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			drive-strength = <6>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			drive-strength = <8>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 			input-enable;
 		};
 	};
 
-	panel_pins_default: panel-pins-default {
-		panel-reset {
+	panel_pins_default: panel-pins {
+		pins-panel-reset {
 			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
 			output-low;
 			bias-pull-up;
 		};
 	};
 
-	pwm0_pin_default: pwm0-pin-default {
+	pwm0_pin_default: pwm0-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
 			output-high;
@@ -679,15 +659,15 @@
 		};
 	};
 
-	scp_pins: scp {
+	scp_pins: scp-pins {
 		pins-scp-uart {
 			pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
 				 <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
 		};
 	};
 
-	spi0_pins: spi0 {
-		pins-spi {
+	spi0_pins: spi0-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -696,8 +676,8 @@
 		};
 	};
 
-	spi1_pins: spi1 {
-		pins-spi {
+	spi1_pins: spi1-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -706,21 +686,21 @@
 		};
 	};
 
-	spi2_pins: spi2 {
-		pins-spi {
+	spi2_pins: spi2-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
 			bias-disable;
 		};
-		pins-spi-mi {
+		pins-miso {
 			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
 			mediatek,pull-down-adv = <00>;
 		};
 	};
 
-	spi3_pins: spi3 {
-		pins-spi {
+	spi3_pins: spi3-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -729,8 +709,8 @@
 		};
 	};
 
-	spi4_pins: spi4 {
-		pins-spi {
+	spi4_pins: spi4-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -739,8 +719,8 @@
 		};
 	};
 
-	spi5_pins: spi5 {
-		pins-spi {
+	spi5_pins: spi5-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
@@ -749,7 +729,7 @@
 		};
 	};
 
-	uart0_pins_default: uart0-pins-default {
+	uart0_pins_default: uart0-pins {
 		pins-rx {
 			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
 			input-enable;
@@ -760,7 +740,7 @@
 		};
 	};
 
-	uart1_pins_default: uart1-pins-default {
+	uart1_pins_default: uart1-pins {
 		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
 			input-enable;
@@ -778,7 +758,7 @@
 		};
 	};
 
-	uart1_pins_sleep: uart1-pins-sleep {
+	uart1_pins_sleep: uart1-sleep-pins {
 		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
 			input-enable;
@@ -796,14 +776,14 @@
 		};
 	};
 
-	wifi_pins_pwrseq: wifi-pins-pwrseq {
+	wifi_pins_pwrseq: wifi-pwr-pins {
 		pins-wifi-enable {
 			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
 			output-low;
 		};
 	};
 
-	wifi_pins_wakeup: wifi-pins-wakeup {
+	wifi_pins_wakeup: wifi-wake-pins {
 		pins-wifi-wakeup {
 			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
 			input-enable;
@@ -944,13 +924,13 @@
 };
 
 &thermal_zones {
-	tboard1 {
+	tboard1-thermal {
 		polling-delay = <1000>; /* milliseconds */
 		polling-delay-passive = <0>; /* milliseconds */
 		thermal-sensors = <&tboard_thermistor1>;
 	};
 
-	tboard2 {
+	tboard2-thermal {
 		polling-delay = <1000>; /* milliseconds */
 		polling-delay-passive = <0>; /* milliseconds */
 		thermal-sensors = <&tboard_thermistor2>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index 61a6f66914b8..f60ef3e53a09 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -324,7 +324,7 @@
 		pins_clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_rst {
@@ -353,13 +353,13 @@
 		pins_clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_rst {
@@ -377,13 +377,13 @@
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins_clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_pmu {
@@ -401,13 +401,13 @@
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			drive-strength = <6>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins_clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			drive-strength = <8>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 			input-enable;
 		};
 	};
@@ -482,6 +482,10 @@
 	domain-supply = <&mt6358_vgpu_reg>;
 };
 
+&cci {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
 &cpu0 {
 	proc-supply = <&mt6358_vproc12_reg>;
 };
@@ -522,19 +526,13 @@
 	status = "okay";
 };
 
-&dsi0 {
-	status = "disabled";
-};
-
 &dpi0 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dpi_func_pins>;
 	pinctrl-1 = <&dpi_idle_pins>;
 	status = "okay";
+};
 
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&it66121_in>;
-		};
-	};
+&dpi_out {
+	remote-endpoint = <&it66121_in>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 1afeeb1155f5..4e20a8f2eb25 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1024,7 +1024,8 @@
 		};
 
 		keyboard: keyboard@10010000 {
-			compatible = "mediatek,mt6779-keypad";
+			compatible = "mediatek,mt8183-keypad",
+				     "mediatek,mt6779-keypad";
 			reg = <0 0x10010000 0 0x1000>;
 			interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_FALLING>;
 			clocks = <&clk26m>;
@@ -1444,11 +1445,11 @@
 			};
 		};
 
-		audiosys: audio-controller@11220000 {
+		audiosys: clock-controller@11220000 {
 			compatible = "mediatek,mt8183-audiosys", "syscon";
 			reg = <0 0x11220000 0 0x1000>;
 			#clock-cells = <1>;
-			afe: mt8183-afe-pcm {
+			afe: audio-controller {
 				compatible = "mediatek,mt8183-audio";
 				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
 				resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>;
@@ -1666,6 +1667,21 @@
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mmsys_ep_main: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&ovl0_in>;
+				};
+
+				mmsys_ep_ext: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&ovl_2l1_in>;
+				};
+			};
 		};
 
 		dma-controller0@14001000 {
@@ -1732,6 +1748,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl0_in: endpoint {
+						remote-endpoint = <&mmsys_ep_main>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&ovl_2l0_in>;
+					};
+				};
+			};
 		};
 
 		ovl_2l0: ovl@14009000 {
@@ -1742,6 +1777,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl_2l0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl_2l0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
 		};
 
 		ovl_2l1: ovl@1400a000 {
@@ -1752,6 +1806,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl_2l1_in: endpoint {
+						remote-endpoint = <&mmsys_ep_ext>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl_2l1_out: endpoint {
+						remote-endpoint = <&rdma1_in>;
+					};
+				};
+			};
 		};
 
 		rdma0: rdma@1400b000 {
@@ -1763,6 +1836,25 @@
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
 			mediatek,rdma-fifo-size = <5120>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl_2l0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
 		};
 
 		rdma1: rdma@1400c000 {
@@ -1774,6 +1866,25 @@
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
 			mediatek,rdma-fifo-size = <2048>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma1_in: endpoint {
+						remote-endpoint = <&ovl_2l1_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma1_out: endpoint {
+						remote-endpoint = <&dpi_in>;
+					};
+				};
+			};
 		};
 
 		color0: color@1400e000 {
@@ -1784,6 +1895,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
 		};
 
 		ccorr0: ccorr@1400f000 {
@@ -1793,6 +1923,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
 		};
 
 		aal0: aal@14010000 {
@@ -1802,6 +1951,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_AAL0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
 		};
 
 		gamma0: gamma@14011000 {
@@ -1811,6 +1979,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					gamma0_out: endpoint {
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
 		};
 
 		dither0: dither@14012000 {
@@ -1820,6 +2007,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dither0_in: endpoint {
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dither0_out: endpoint {
+						remote-endpoint = <&dsi_in>;
+					};
+				};
+			};
 		};
 
 		dsi0: dsi@14014000 {
@@ -1834,6 +2040,24 @@
 			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&dither0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi_out: endpoint { };
+				};
+			};
 		};
 
 		dpi0: dpi@14015000 {
@@ -1845,9 +2069,23 @@
 				 <&mmsys CLK_MM_DPI_MM>,
 				 <&apmixedsys CLK_APMIXED_TVDPLL>;
 			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
 
-			port {
-				dpi_out: endpoint { };
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dpi_in: endpoint {
+						remote-endpoint = <&rdma1_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dpi_out: endpoint { };
+				};
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku0.dts
new file mode 100644
index 000000000000..5d012bc4ff0d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku0.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-chinchou.dtsi"
+
+/ {
+	model = "Google chinchou CZ1104CM2A/CZ1204CM2A";
+	compatible = "google,chinchou-sku0", "google,chinchou-sku2",
+			"google,chinchou-sku4", "google,chinchou-sku5",
+			"google,chinchou", "mediatek,mt8186";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku1.dts
new file mode 100644
index 000000000000..9d6e62af6944
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku1.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-chinchou.dtsi"
+
+/ {
+	model = "Google chinchou CZ1104FM2A/CZ1204FM2A/CZ1104CM2A/CZ1204CM2A";
+	compatible = "google,chinchou-sku1", "google,chinchou-sku3",
+			"google,chinchou-sku6", "google,chinchou-sku7",
+			"google,chinchou-sku17", "google,chinchou-sku20",
+			"google,chinchou-sku22", "google,chinchou-sku23",
+			"google,chinchou", "mediatek,mt8186";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	i2c-scl-internal-delay-ns = <10000>;
+
+	touchscreen: touchscreen@41 {
+		compatible = "ilitek,ili2901";
+		reg = <0x41>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vccio-supply = <&pp1800_tchscr_report_disable>;
+		vcc33-supply = <&pp3300_z2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku16.dts
new file mode 100644
index 000000000000..eb377de1fcde
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou-sku16.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-chinchou.dtsi"
+
+/ {
+	model = "Google chinchou CZ1104FM2A/CZ1204FM2A";
+	compatible = "google,chinchou-sku16", "google,chinchou-sku18",
+			"google,chinchou-sku19", "google,chinchou-sku21",
+			"google,chinchou", "mediatek,mt8186";
+};
+
+&i2c1 {
+	i2c-scl-internal-delay-ns = <10000>;
+
+	touchscreen: touchscreen@41 {
+		compatible = "ilitek,ili2901";
+		reg = <0x41>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vccio-supply = <&pp1800_tchscr_report_disable>;
+		vcc33-supply = <&pp3300_z2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou.dtsi
new file mode 100644
index 000000000000..800792157021
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-chinchou.dtsi
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+
+/ {
+	/delete-node/ speaker-codec;
+
+	pp1000_edpbrdg: regulator-pp1000-edpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_edpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1000_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_edpbrdg_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1800_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6366_vio18_reg>;
+	};
+
+	pp3300_edp_dx: regulator-pp3300-edp-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_edp_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	pp1800_tchscr_report_disable: regulator-pp1800-tchscr-report-disable {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_tchscr_report_disable";
+		pinctrl-names = "default";
+		regulator-boot-on;
+		pinctrl-0 = <&touch_pin_report>;
+		gpio = <&pio 37 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1000_edpbrdg>;
+		vdd18-supply = <&pp1800_edpbrdg_dx>;
+		vdd33-supply = <&pp3300_edp_dx>;
+		analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
+		analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <0 1 2 3>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_disp_x>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/delete-node/ trackpad@15;
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	/delete-node/ codec@1a;
+
+	rt5650: rt5650@1a {
+		compatible = "realtek,rt5650";
+		reg = <0x1a>;
+		avdd-supply = <&mt6366_vio18_reg>;
+		cpvdd-supply = <&mt6366_vio18_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_codec_pins_default>;
+		cbj-sleeve-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&pio>;
+		interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
+		#sound-dai-cells = <0>;
+		realtek,dmic1-data-pin = <2>;
+		realtek,jd-mode = <2>;
+	};
+};
+
+&i2c_tunnel {
+	/delete-node/ sbs-battery@b;
+
+	battery: sbs-battery@f {
+		compatible = "sbs,sbs-battery";
+		reg = <0xf>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
+
+&keyboard_controller {
+	keypad,num-columns = <15>;
+
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)        /* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)        /* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)        /* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)        /* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)        /* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)        /* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)        /* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)        /* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)        /* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)        /* T10 */
+		MATRIX_KEY(0x00, 0x01, 0)        /* T11 */
+		MATRIX_KEY(0x01, 0x05, 0)        /* T12 */
+	>;
+
+	linux,keymap = <
+		CROS_STD_MAIN_KEYMAP
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)           /* T1 */
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)        /* T2 */
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)           /* T3 */
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)          /* T4 */
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)          /* T5 */
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) /* T6 */
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)   /* T7 */
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)           /* T8 */
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)	   /* T9 */
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)	   /* T10 */
+		MATRIX_KEY(0x00, 0x01, KEY_MICMUTE)        /* T11 */
+		MATRIX_KEY(0x01, 0x05, KEY_CONTROLPANEL)   /* T12 */
+		MATRIX_KEY(0x03, 0x05, KEY_PREVIOUSSONG)   /* T13 */
+		MATRIX_KEY(0x00, 0x09, KEY_PLAYPAUSE)	   /* T14 */
+		MATRIX_KEY(0x00, 0x0b, KEY_NEXTSONG)	   /* T15 */
+		MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA)	   /* Search*/
+		MATRIX_KEY(0x01, 0x0e, KEY_LEFTCTRL)	   /* Left Control*/
+		MATRIX_KEY(0x06, 0x0d, KEY_LEFTALT)        /* Left ALT*/
+		MATRIX_KEY(0x03, 0x0e, KEY_RIGHTCTRL)      /* Right Control*/
+		MATRIX_KEY(0x06, 0x0a, KEY_BACKSLASH)      /* BACKSLASH*/
+	>;
+};
+
+&mmc1_pins_default {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&pen_insert {
+	wakeup-event-action = <EV_ACT_ANY>;
+};
+
+&pio {
+	anx7625_pins: anx7625-pins {
+		pins-int {
+			pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+
+		pins-power-en {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-low;
+		};
+	};
+
+	en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+			output-low;
+		};
+	};
+
+	en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
+			output-low;
+		};
+	};
+
+	en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
+			output-low;
+		};
+	};
+
+	touch_pin_report: pin-report-pins {
+		pins-touch-en {
+			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
+			output-low;
+		};
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8186-mt6366-rt5650-sound";
+	model = "mt8186_rt5650";
+	mediatek,adsp = <&adsp>;
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"IN1P", "Headset Mic",
+		"IN1N", "Headset Mic",
+		"Speakers", "SPOL",
+		"Speakers", "SPOR",
+		"HDMI1", "TX";
+
+	hs-playback-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	hs-capture-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	spk-share-dai-link {
+	};
+
+	spk-hdmi-playback-dai-link {
+		codec {
+			sound-dai = <&it6505dptx>;
+		};
+	};
+};
+
+&touchscreen_pins {
+	/delete-node/ pins-report-sw;
+};
+
+&wifi_enable_pin {
+	pins-wifi-enable {
+		pinmux = <PINMUX_GPIO51__FUNC_GPIO51>;
+	};
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&pio 51 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
index 7c971198fa95..72a2a2bff0a9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
@@ -71,14 +71,14 @@
 	i2c-scl-internal-delay-ns = <10000>;
 
 	touchscreen: touchscreen@10 {
-		compatible = "hid-over-i2c";
+		compatible = "elan,ekth6915";
 		reg = <0x10>;
 		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touchscreen_pins>;
-		post-power-on-delay-ms = <10>;
-		hid-descr-addr = <0x0001>;
-		vdd-supply = <&pp3300_s3>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		no-reset-on-power-off;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts
new file mode 100644
index 000000000000..986498af4c70
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku0.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-ponyta.dtsi"
+
+/ {
+	model = "Google Ponyta sku0 board";
+	compatible = "google,ponyta-sku0", "google,ponyta", "mediatek,mt8186";
+};
+
+&i2c2 {
+	trackpad@15 {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts
new file mode 100644
index 000000000000..ff5eea0ddeb4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta-sku1.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-ponyta.dtsi"
+
+/ {
+	model = "Google Ponyta sku1 board";
+	compatible = "google,ponyta-sku1", "google,ponyta", "mediatek,mt8186";
+};
+
+&i2c2 {
+	trackpad@2c {
+		status = "disabled";
+	};
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi
new file mode 100644
index 000000000000..0abf69077089
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-ponyta.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T8 */
+		MATRIX_KEY(0x00, 0x01, 0)	/* T9 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T10 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T11 */
+		MATRIX_KEY(0x01, 0x05, 0)	/* T12 */
+	>;
+
+	linux,keymap = <
+		CROS_STD_MAIN_KEYMAP
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x00, 0x04, KEY_PLAYPAUSE)
+		MATRIX_KEY(0x00, 0x01, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x01, 0x05, KEY_VOLUMEUP)
+	>;
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
+&sound {
+	model = "mt8186_rt1019_rt5682s";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts
new file mode 100644
index 000000000000..f721ad4e5c97
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-voltorb.dtsi"
+
+/ {
+	model = "Google squirtle board";
+	compatible = "google,squirtle", "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&i2c1 {
+	touchscreen@10 {
+		compatible = "elan,ekth6915";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		status = "fail-needs-probe";
+	};
+
+	touchscreen@16 {
+		compatible = "elan,ekth8d18", "elan,ekth6a12nay";
+		reg = <0x16>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		status = "fail-needs-probe";
+	};
+};
+
+&i2c2 {
+	trackpad@68 {
+		compatible = "hid-over-i2c";
+		reg = <0x68>;
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+		status = "fail-needs-probe";
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	/delete-node/ codec@1a;
+
+	rt5650: codec@1a {
+		compatible = "realtek,rt5650";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
+		avdd-supply = <&mt6366_vio18_reg>;
+		cpvdd-supply = <&mt6366_vio18_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_codec_pins_default>;
+		cbj-sleeve-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		realtek,dmic1-data-pin = <2>;
+		realtek,jd-mode = <2>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8186-mt6366-rt5650-sound";
+	model = "mt8186_rt5650";
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"HDMI1", "TX";
+
+	hs-playback-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	hs-capture-dai-link {
+		codec {
+			sound-dai = <&rt5650>;
+		};
+	};
+
+	spk-hdmi-playback-dai-link {
+		codec {
+			sound-dai = <&it6505dptx>;
+		};
+	};
+};
+
+&speaker_codec {
+	status = "disabled";
+};
+
+&trackpad_steelix {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku0.dts
new file mode 100644
index 000000000000..23e194579bf2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku0.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-starmie.dtsi"
+
+/ {
+	model = "Google Starmie sku0 board";
+	compatible = "google,starmie-sku0", "google,starmie-sku2",
+		     "google,starmie-sku3", "google,starmie",
+		     "mediatek,mt8186";
+};
+
+&panel {
+	compatible = "starry,ili9882t";
+};
+
+&i2c1 {
+	touchscreen: touchscreen@41 {
+		compatible = "ilitek,ili9882t";
+		reg = <0x41>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		panel = <&panel>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vccio-supply = <&mt6366_vio18_reg>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku1.dts
new file mode 100644
index 000000000000..214b972c9357
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku1.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-starmie.dtsi"
+
+/ {
+	model = "Google Starmie sku1 board";
+	compatible = "google,starmie-sku1", "google,starmie-sku4",
+		     "google,starmie", "mediatek,mt8186";
+};
+
+&panel {
+	compatible = "starry,himax83102-j02", "himax,hx83102";
+};
+
+&i2c1 {
+	touchscreen_himax: touchscreen@4f {
+		compatible = "hid-over-i2c";
+		reg = <0x4f>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		vdd-supply = <&mt6366_vio18_reg>;
+		panel = <&panel>;
+		post-power-on-delay-ms = <450>;
+		hid-descr-addr = <0x0001>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi
new file mode 100644
index 000000000000..a8e79c2791ba
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+
+/ {
+	en_pp6000_mipi_disp_150ma: en-pp6000-mipi-disp-150ma {
+		compatible = "regulator-fixed";
+		regulator-name = "en_pp6000_mipi_disp_150ma";
+		gpio = <&pio 154 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp6000_mipi_disp_150ma_fixed_pins>;
+	};
+
+	/*
+	 * Starmie does not have 3.3V display regulator. It is replaced
+	 * with 6V module for enabling panel, re-using eDP GPIOs.
+	 */
+	/delete-node/ pp3300_disp_x;
+	en_pp6000_mipi_disp: en-regulator-pp6000-mipi-disp {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_fixed_pins>;
+		gpios = <&pio 153 GPIO_ACTIVE_HIGH>;
+		regulator-name = "en_pp6000_mipi_disp";
+		enable-active-high;
+		regulator-enable-ramp-delay = <3000>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	tboard_thermistor1: thermal-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 1492
+						0 1413
+						5000 1324
+						10000 1227
+						15000 1121
+						20000 1017
+						25000 900
+						30000 797
+						35000 698
+						40000 606
+						45000 522
+						50000 449
+						55000 383
+						60000 327
+						65000 278
+						70000 236
+						75000 201
+						80000 171
+						85000 145
+						90000 163
+						95000 124
+						100000 91
+						105000 78
+						110000 67
+						115000 58
+						120000 50
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 1492
+						0 1413
+						5000 1324
+						10000 1227
+						15000 1121
+						20000 1017
+						25000 900
+						30000 797
+						35000 698
+						40000 606
+						45000 522
+						50000 449
+						55000 383
+						60000 327
+						65000 278
+						70000 236
+						75000 201
+						80000 171
+						85000 145
+						90000 163
+						95000 124
+						100000 91
+						105000 78
+						110000 67
+						115000 58
+						120000 50
+						125000 44>;
+	};
+};
+
+/*
+ * Starmie does not have EC keyboard. Remove default keyboard controller
+ * and replace it with the driver for side switches.
+ */
+/delete-node/ &keyboard_controller;
+
+&cros_ec {
+	cbas: cbas {
+		compatible = "google,cros-cbas";
+	};
+
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 98 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+		avdd-supply = <&en_pp6000_mipi_disp>;
+		avee-supply = <&en_pp6000_mipi_disp_150ma>;
+		pp1800-supply = <&mt6366_vio18_reg>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+};
+
+&mmc1_pins_default {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <8>;
+	};
+
+	pins-cmd-dat {
+		drive-strength = <8>;
+	};
+};
+
+&pen_insert {
+	wakeup-event-action = <EV_ACT_ANY>;
+};
+
+&pio {
+	/* 185 lines */
+	gpio-line-names = "TP",
+			  "TP",
+			  "TP",
+			  "I2S0_HP_DI",
+			  "I2S3_DP_SPKR_DO",
+			  "SAR_INT_ODL",
+			  "BT_WAKE_AP_ODL",
+			  "WIFI_INT_ODL",
+			  "DPBRDG_INT_ODL",
+			  "NC",
+			  "EC_AP_HPD_OD",
+			  "NC",
+			  "TCHSCR_INT_1V8_ODL",
+			  "EC_AP_INT_ODL",
+			  "EC_IN_RW_ODL",
+			  "GSC_AP_INT_ODL",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+			   * call it AP_WP_ODL.
+			   */
+			  "AP_FLASH_WP_L",
+			  "HP_INT_ODL",
+			  "PEN_EJECT_OD",
+			  "NC",
+			  "NC",
+			  "UCAM_SEN_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "I2S2_DP_SPK_MCK",
+			  "I2S2_DP_SPKR_BCK",
+			  "I2S2_DP_SPKR_LRCK",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "UART_GSC_TX_AP_RX",
+			  "UART_AP_TX_GSC_RX",
+			  "UART_DBGCON_TX_ADSP_RX",
+			  "UART_ADSP_TX_DBGCON_RX",
+			  "NC",
+			  "TCHSCR_REPORT_DISABLE",
+			  "NC",
+			  "EN_PP1800_DPBRDG",
+			  "SPI_AP_CLK_EC",
+			  "SPI_AP_CS_EC_L",
+			  "SPI_AP_DO_EC_DI",
+			  "SPI_AP_DI_EC_DO",
+			  "SPI_AP_CLK_GSC",
+			  "SPI_AP_CS_GSC_L",
+			  "SPI_AP_DO_GSC_DI",
+			  "SPI_AP_DI_GSC_DO",
+			  "UART_DBGCON_TX_SCP_RX",
+			  "UART_SCP_TX_DBGCON_RX",
+			  "EN_PP1200_CAM_X",
+			  "WLAN_MODULE_RST_L",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "I2S1_HP_DO",
+			  "I2S1_HP_BCK",
+			  "I2S1_HP_LRCK",
+			  "I2S1_HP_MCK",
+			  "TCHSCR_RST_1V8_L",
+			  "SPI_AP_CLK_ROM",
+			  "SPI_AP_CS_ROM_L",
+			  "SPI_AP_DO_ROM_DI",
+			  "SPI_AP_DI_ROM_DO",
+			  "NC",
+			  "NC",
+			  "EMMC_STRB",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "EMMC_RST_L",
+			  "EMMC_DATA0",
+			  "EMMC_DATA1",
+			  "EMMC_DATA2",
+			  "EMMC_DATA3",
+			  "EMMC_DATA4",
+			  "EMMC_DATA5",
+			  "EMMC_DATA6",
+			  "EMMC_DATA7",
+			  "AP_KPCOL0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "TP",
+			  "SDIO_CLK",
+			  "SDIO_CMD",
+			  "SDIO_DATA0",
+			  "SDIO_DATA1",
+			  "SDIO_DATA2",
+			  "SDIO_DATA3",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MIPI_BL_PWM_1V8",
+			  "DISP_RST_1V8_L",
+			  "MIPI_DPI_CLK",
+			  "MIPI_DPI_VSYNC",
+			  "MIPI_DPI_HSYNC",
+			  "MIPI_DPI_DE",
+			  "MIPI_DPI_D0",
+			  "MIPI_DPI_D1",
+			  "MIPI_DPI_D2",
+			  "MIPI_DPI_D3",
+			  "MIPI_DPI_D4",
+			  "MIPI_DPI_D5",
+			  "MIPI_DPI_D6",
+			  "MIPI_DPI_DA7",
+			  "MIPI_DPI_D8",
+			  "MIPI_DPI_D9",
+			  "MIPI_DPI_D10",
+			  "MIPI_DPI_D11",
+			  "PCM_BT_CLK",
+			  "PCM_BT_SYNC",
+			  "PCM_BT_DI",
+			  "PCM_BT_DO",
+			  "JTAG_TMS_TP",
+			  "JTAG_TCK_TP",
+			  "JTAG_TDI_TP",
+			  "JTAG_TDO_TP",
+			  "JTAG_TRSTN_TP",
+			  "NC",
+			  "NC",
+			  "UCAM_DET_ODL",
+			  "NC",
+			  "NC",
+			  "AP_I2C_TCHSCR_SCL_1V8",
+			  "AP_I2C_TCHSCR_SDA_1V8",
+			  "NC",
+			  "NC",
+			  "AP_I2C_DPBRDG_SCL_1V8",
+			  "AP_I2C_DPBRDG_SDA_1V8",
+			  "NC",
+			  "NC",
+			  "AP_I2C_AUD_SCL_1V8",
+			  "AP_I2C_AUD_SDA_1V8",
+			  "AP_I2C_DISP_SCL_1V8",
+			  "AP_I2C_DISP_SDA_1V8",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SCP_I2C_SENSOR_SCL_1V8",
+			  "SCP_I2C_SENSOR_SDA_1V8",
+			  "AP_EC_WARM_RST_REQ",
+			  "AP_XHCI_INIT_DONE",
+			  "USB3_HUB_RST_L",
+			  "EN_SPKR",
+			  "BEEP_ON",
+			  "AP_DISP_BKLTEN",
+			  "EN_PP6000_MIPI_DISP",
+			  "EN_PP6000_MIPI_DISP_150MA",
+			  "BT_KILL_1V8_L",
+			  "WIFI_KILL_1V8_L",
+			  "PWRAP_SPI0_CSN",
+			  "PWRAP_SPI0_CK",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_MI",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "SCP_VREQ_VAO",
+			  "AP_RTC_CLK32K",
+			  "AP_PMIC_WDTRST_L",
+			  "AUD_CLK_MOSI",
+			  "AUD_SYNC_MOSI",
+			  "AUD_DAT_MOSI0",
+			  "AUD_DAT_MOSI1",
+			  "AUD_CLK_MISO",
+			  "AUD_SYNC_MISO",
+			  "AUD_DAT_MISO0",
+			  "AUD_DAT_MISO1",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DPBRDG_RST_L",
+			  "LTE_W_DISABLE_L",
+			  "LTE_SAR_DETECT_L",
+			  "EN_PP3300_LTE_X",
+			  "LTE_PWR_OFF_L",
+			  "LTE_RESET_L",
+			  "TP",
+			  "TP";
+
+	en_pp6000_mipi_disp_150ma_fixed_pins: en_pp6000-mipi-disp-150ma-fixed-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO154__FUNC_GPIO154>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+	};
+};
+
+&usb_c1 {
+	status = "disabled";
+};
+
+&thermal_zones {
+	tboard1-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor1>;
+	};
+
+	tboard2-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor2>;
+	};
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&pio 51 1>;
+};
+
+/*
+ * Battery on Starmie is using a different address than default.
+ * Remove old node to reuse "battery" alias.
+ */
+/delete-node/ &battery;
+&i2c_tunnel {
+	battery: sbs-battery@f {
+		compatible = "sbs,sbs-battery";
+		reg = <0xf>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
index e74e886a00cb..8a196dc9a96b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
@@ -118,13 +118,16 @@
 	i2c-scl-internal-delay-ns = <22000>;
 
 	/* second source component */
-	trackpad@2c {
+	trackpad_steelix: trackpad@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
 		hid-descr-addr = <0x20>;
 		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
 		vdd-supply = <&pp3300_s3>;
 		wakeup-source;
+		status = "fail-needs-probe";
 	};
 };
 
@@ -197,3 +200,7 @@
 		};
 	};
 };
+
+&trackpad {
+	status = "fail-needs-probe";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
index c3ae6f9616c8..4dbf2cb73a81 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
@@ -17,6 +17,8 @@
 		compatible = "hid-over-i2c";
 		reg = <0x15>;
 		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
 		hid-descr-addr = <0x0001>;
 		vdd-supply = <&pp3300_s3>;
 		wakeup-source;
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
index 26d3451a5e47..24d9ede63eaa 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
@@ -42,3 +42,7 @@
 		CROS_STD_MAIN_KEYMAP
 	>;
 };
+
+&touchscreen {
+	compatible = "elan,ekth6a12nay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
index 447b57b12b41..ee5bc2cd9e9f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
@@ -19,6 +19,8 @@
 		compatible = "hid-over-i2c";
 		reg = <0x15>;
 		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
 		hid-descr-addr = <0x0001>;
 		vdd-supply = <&pp3300_s3>;
 		wakeup-source;
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts
deleted file mode 100644
index d16834eec87a..000000000000
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2022 Google LLC
- */
-
-/dts-v1/;
-#include "mt8186-corsola-voltorb.dtsi"
-
-/ {
-	model = "Google Voltorb sku589824 board";
-	compatible = "google,voltorb-sku589824", "google,voltorb",
-		     "mediatek,mt8186";
-};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589825.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts
index 45e57f7706cc..cc805408a8b7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589825.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts
@@ -7,9 +7,8 @@
 #include "mt8186-corsola-voltorb.dtsi"
 
 / {
-	model = "Google Voltorb sku589825 board";
-	compatible = "google,voltorb-sku589825", "google,voltorb",
-		     "mediatek,mt8186";
+	model = "Google Voltorb board";
+	compatible = "google,voltorb", "mediatek,mt8186";
 };
 
 &i2c1 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
index cfcc7909dfe6..ff20376a44d7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -161,6 +161,13 @@
 		#size-cells = <2>;
 		ranges;
 
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
 		adsp_dma_mem: memory@61000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x61000000 0 0x100000>;
@@ -310,6 +317,7 @@
 };
 
 &afe {
+	memory-region = <&afe_dma_mem>;
 	status = "okay";
 };
 
@@ -390,19 +398,17 @@
 
 &i2c2 {
 	pinctrl-names = "default";
-	/*
-	 * Trackpad pin put here to work around second source components
-	 * sharing the pinmux in steelix designs.
-	 */
-	pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	i2c-scl-internal-delay-ns = <10000>;
 	status = "okay";
 
-	trackpad@15 {
+	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
 		reg = <0x15>;
 		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pin>;
 		vcc-supply = <&pp3300_s3>;
 		wakeup-source;
 	};
@@ -424,6 +430,7 @@
 		ovdd-supply = <&mt6366_vsim2_reg>;
 		pwr18-supply = <&pp1800_dpbrdg_dx>;
 		reset-gpios = <&pio 177 GPIO_ACTIVE_LOW>;
+		extcon = <&usbc_extcon>;
 
 		ports {
 			#address-cells = <1>;
@@ -517,7 +524,6 @@
 	cap-sdio-irq;
 	no-mmc;
 	no-sd;
-	non-removable;
 	vmmc-supply = <&pp3300_s3>;
 	vqmmc-supply = <&mt6366_vio18_reg>;
 	mmc-pwrseq = <&wifi_pwrseq>;
@@ -1275,7 +1281,7 @@
 		interrupts-extended = <&pio 201 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 
-		mt6366codec: codec {
+		mt6366codec: audio-codec {
 			compatible = "mediatek,mt6366-sound", "mediatek,mt6358-sound";
 			Avdd-supply = <&mt6366_vaud28_reg>;
 			mediatek,dmic-mode = <1>; /* one-wire */
@@ -1656,6 +1662,11 @@
 				try-power-role = "source";
 			};
 		};
+
+		usbc_extcon: extcon0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index d3c3c2a40adc..b91f88ffae0e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -1577,6 +1577,8 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x420 2>;
 			status = "disabled";
 
 			usb_host0: usb@11200000 {
@@ -1590,8 +1592,6 @@
 					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
 				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 				interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
-				mediatek,syscon-wakeup = <&pericfg 0x420 2>;
-				wakeup-source;
 				status = "disabled";
 			};
 		};
@@ -1643,6 +1643,8 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x424 2>;
 			status = "disabled";
 
 			usb_host1: usb@11280000 {
@@ -1656,8 +1658,6 @@
 					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
 				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck";
 				interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
-				mediatek,syscon-wakeup = <&pericfg 0x424 2>;
-				wakeup-source;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
index f89835ac36f3..f4c207d65b87 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
@@ -331,7 +331,11 @@
 	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
 };
 
-&scp {
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
 	memory-region = <&scp_mem_reserved>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku0.dts
new file mode 100644
index 000000000000..79d6d12394b9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku0.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku0 board";
+	compatible = "google,ciri-sku0", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_m98390_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku1.dts
new file mode 100644
index 000000000000..ef5ea9d12b1d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku1.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku1 board";
+	compatible = "google,ciri-sku1", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_m98390_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku2.dts
new file mode 100644
index 000000000000..ef56786fc2be
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku2.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku2 board";
+	compatible = "google,ciri-sku2", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_m98390_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku3.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku3.dts
new file mode 100644
index 000000000000..524f7f0064c1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku3.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku3 board";
+	compatible = "google,ciri-sku3", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_m98390_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic",
+		"Left Spk", "Front Left BE_OUT",
+		"Right Spk", "Front Right BE_OUT";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku4.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku4.dts
new file mode 100644
index 000000000000..ea953d7e1543
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku4.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku4 board (rev4)";
+	compatible = "google,ciri-sku4", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_tas2563_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku5.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku5.dts
new file mode 100644
index 000000000000..bf87201ccf27
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku5.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku5 board (rev4)";
+	compatible = "google,ciri-sku5", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_tas2563_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku6.dts
new file mode 100644
index 000000000000..17d7359dfb6a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku6.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku6 board (rev4)";
+	compatible = "google,ciri-sku6", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "boe,nv110wum-l60", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ audio-codec@1a;
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	es8326: audio-codec@19 {
+		compatible = "everest,es8326";
+		reg = <0x19>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <0>;
+		everest,jack-pol = [0e];
+		everest,interrupt-clk = [00];
+	};
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-es8326";
+	model = "mt8188_tas2563_8326";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"MIC1", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+
+	dai-link-2 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+
+	dai-link-3 {
+		codec {
+			sound-dai = <&es8326>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku7.dts
new file mode 100644
index 000000000000..825015b452d5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri-sku7.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt-ciri.dtsi"
+
+/ {
+	model = "Google Ciri sku7 board (rev4)";
+	compatible = "google,ciri-sku7", "google,ciri", "mediatek,mt8188";
+};
+
+&dsi_panel {
+	compatible = "ivo,t109nw41", "himax,hx83102";
+};
+
+&i2c0 {
+	/delete-node/ amplifier@38;
+	/delete-node/ amplifier@39;
+
+	tas2563: amplifier@4f {
+		compatible = "ti,tas2563", "ti,tas2781";
+		reg = <0x4f>, <0x4c>; /* left / right channel */
+		reset-gpios = <&pio 118 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8188-rt5682s";
+	model = "mt8188_tas2563_5682";
+
+	audio-routing =
+		"ETDM1_OUT", "ETDM_SPK_PIN",
+		"ETDM2_OUT", "ETDM_HP_PIN",
+		"ETDM1_IN", "ETDM_SPK_PIN",
+		"ETDM2_IN", "ETDM_HP_PIN",
+		"ADDA Capture", "MTKAIF_PIN",
+		"Headphone Jack", "HPOL",
+		"Headphone Jack", "HPOR",
+		"IN1P", "Headset Mic";
+
+	dai-link-1 {
+		codec {
+			sound-dai = <&tas2563>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri.dtsi
new file mode 100644
index 000000000000..6815c435a57e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt-ciri.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+/dts-v1/;
+#include "mt8188-geralt.dtsi"
+
+&aud_etdm_hp_on {
+	pins-mclk {
+		pinmux = <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>;
+	};
+};
+
+&aud_etdm_hp_off {
+	pins-mclk {
+		pinmux = <PINMUX_GPIO114__FUNC_B_GPIO114>;
+		bias-pull-down;
+		input-enable;
+	};
+};
+
+&i2c0 {
+	rt5682s: audio-codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 108 IRQ_TYPE_EDGE_BOTH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_codec_pins>;
+		#sound-dai-cells = <1>;
+
+		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
+		MICVDD-supply = <&pp3300_s3>;
+		realtek,jd-src = <1>;
+	};
+
+	max98390_38: amplifier@38 {
+		compatible = "maxim,max98390";
+		reg = <0x38>;
+		sound-name-prefix = "Front Right";
+		reset-gpios = <&pio 118 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_en>;
+		#sound-dai-cells = <0>;
+	};
+
+	max98390_39: amplifier@39 {
+		compatible = "maxim,max98390";
+		reg = <0x39>;
+		sound-name-prefix = "Front Left";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c_tunnel {
+	/*
+	 * The virtual battery I2C addr is 0xf on Ciri, so we describe it
+	 * manually instead of including 'arm/cros-ec-sbs.dtsi'.
+	 **/
+	battery: sbs-battery@f {
+		compatible = "sbs,sbs-battery";
+		reg = <0xf>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
+
+&mipi_tx_config0 {
+	drive-strength-microamp = <5200>;
+};
+
+&mt6359_vm18_ldo_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1900000>;
+	regulator-microvolt-offset = <100000>;
+};
+
+&sound {
+	dai-link-0 {
+		link-name = "ETDM1_IN_BE";
+		dai-format = "i2s";
+		mediatek,clk-provider = "cpu";
+	};
+
+	dai-link-1 {
+		link-name = "ETDM1_OUT_BE";
+		dai-format = "i2s";
+		mediatek,clk-provider = "cpu";
+
+		codec {
+			sound-dai = <&max98390_38>,
+				    <&max98390_39>;
+		};
+	};
+
+	dai-link-2 {
+		link-name = "ETDM2_IN_BE";
+		mediatek,clk-provider = "cpu";
+
+		codec {
+			sound-dai = <&rt5682s 0>;
+		};
+	};
+
+	dai-link-3 {
+		link-name = "ETDM2_OUT_BE";
+		mediatek,clk-provider = "cpu";
+
+		codec {
+			sound-dai = <&rt5682s 0>;
+		};
+	};
+
+	dai-link-4 {
+		link-name = "DPTX_BE";
+
+		codec {
+			sound-dai = <&dp_tx>;
+		};
+	};
+};
+
+&pio {
+	gpio-line-names =
+		"GSC_AP_INT_ODL",
+		"AP_DISP_BKLTEN",
+		"",
+		"EN_PPVAR_MIPI_DISP",
+		"EN_PPVAR_MIPI_DISP_150MA",
+		"TCHSCR_RST_1V8_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_SPKR_DATAOUT",
+		"EN_PP3300_WLAN_X",
+		"WIFI_KILL_1V8_L",
+		"BT_KILL_1V8_L",
+		"AP_FLASH_WP_L", /* ... is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
+		"",
+		"",
+		"WCAM_PWDN_L",
+		"WCAM_RST_L",
+		"UCAM_PWDM_L",
+		"UCAM_RST_L",
+		"WCAM_24M_CLK",
+		"UCAM_24M_CLK",
+		"MT6319_INT",
+		"DISP_RST_1V8_L",
+		"DSIO_DSI_TE",
+		"",
+		"TP",
+		"MIPI_BL_PWM_1V8",
+		"",
+		"UART_AP_TX_GSC_RX",
+		"UART_GSC_TX_AP_RX",
+		"UART_SSPM_TX_DBGCON_RX",
+		"UART_DBGCON_TX_SSPM_RX",
+		"UART_ADSP_TX_DBGCON_RX",
+		"UART_DBGCON_TX_ADSP_RX",
+		"JTAG_AP_TMS",
+		"JTAG_AP_TCK",
+		"JTAG_AP_TDI",
+		"JTAG_AP_TDO",
+		"JTAG_AP_TRST",
+		"AP_KPCOL0",
+		"TP",
+		"",
+		"TP",
+		"EC_AP_HPD_OD",
+		"PCIE_WAKE_1V8_ODL",
+		"PCIE_RST_1V8_L",
+		"PCIE_CLKREQ_1V8_ODL",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_I2C_AUD_SCL_1V8",
+		"AP_I2C_AUD_SDA_1V8",
+		"AP_I2C_TPM_SCL_1V8",
+		"AP_I2C_TPM_SDA_1V8",
+		"AP_I2C_TCHSCR_SCL_1V8",
+		"AP_I2C_TCHSCR_SDA_1V8",
+		"AP_I2C_PMIC_SAR_SCL_1V8",
+		"AP_I2C_PMIC_SAR_SDA_1V8",
+		"AP_I2C_EC_HID_KB_SCL_1V8",
+		"AP_I2C_EC_HID_KB_SDA_1V8",
+		"AP_I2C_UCAM_SCL_1V8",
+		"AP_I2C_UCAM_SDA_1V8",
+		"AP_I2C_WCAM_SCL_1V8",
+		"AP_I2C_WCAM_SDA_1V8",
+		"SPI_AP_CS_EC_L",
+		"SPI_AP_CLK_EC",
+		"SPI_AP_DO_EC_DI",
+		"SPI_AP_DI_EC_DO",
+		"TP",
+		"TP",
+		"SPI_AP_CS_TCHSCR_L",
+		"SPI_AP_CLK_TCHSCR",
+		"SPI_AP_DO_TCHSCR_DI",
+		"SPI_AP_DI_TCHSCR_DO",
+		"TP",
+		"TP",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"TP",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"PWRAP_SPI_CS_L",
+		"PWRAP_SPI_CK",
+		"PWRAP_SPI_MOSI",
+		"PWRAP_SPI_MISO",
+		"SRCLKENA0",
+		"SRCLKENA1",
+		"SCP_VREQ_VAO",
+		"AP_RTC_CLK32K",
+		"AP_PMIC_WDTRST_L",
+		"AUD_CLK_MOSI",
+		"AUD_SYNC_MOSI",
+		"AUD_DAT_MOSI0",
+		"AUD_DAT_MOSI1",
+		"AUD_DAT_MISO0",
+		"AUD_DAT_MISO1",
+		"",
+		"HP_INT_ODL",
+		"SPKR_INT_ODL",
+		"I2S_HP_DATAIN",
+		"EN_SPKR",
+		"I2S_SPKR_MCLK",
+		"I2S_SPKR_BCLK",
+		"I2S_HP_MCLK",
+		"I2S_HP_BCLK",
+		"I2S_HP_LRCK",
+		"I2S_HP_DATAOUT",
+		"RST_SPKR_L",
+		"I2S_SPKR_LRCK",
+		"I2S_SPKR_DATAIN",
+		"",
+		"",
+		"",
+		"",
+		"SPI_AP_CLK_ROM",
+		"SPI_AP_CS_ROM_L",
+		"SPI_AP_DO_ROM_DI",
+		"SPI_AP_DI_ROM_DO",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"EN_PP2800A_UCAM_X",
+		"EN_PP1200_UCAM_X",
+		"EN_PP2800A_WCAM_X",
+		"EN_PP1100_WCAM_X",
+		"TCHSCR_INT_1V8_L",
+		"",
+		"MT7921_PMU_EN_1V8",
+		"",
+		"AP_EC_WARM_RST_REQ",
+		"EC_AP_HID_INT_ODL",
+		"EC_AP_INT_ODL",
+		"AP_XHCI_INIT_DONE",
+		"EMMC_DAT7",
+		"EMMC_DAT6",
+		"EMMC_DAT5",
+		"EMMC_DAT4",
+		"EMMC_RST_L",
+		"EMMC_CMD",
+		"EMMC_CLK",
+		"EMMC_DAT3",
+		"EMMC_DAT2",
+		"EMMC_DAT1",
+		"EMMC_DAT0",
+		"EMMC_DSL",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"USB3_HUB_RST_L",
+		"EC_AP_RSVD0_ODL",
+		"",
+		"",
+		"SPMI_SCL",
+		"SPMI_SDA";
+
+	audio_codec_pins: audio-codec-pins {
+		pins-hp-int-odl {
+			pinmux = <PINMUX_GPIO108__FUNC_B_GPIO108>;
+			input-enable;
+		};
+	};
+
+	speaker_en: speaker-en-pins {
+		pins-en-spkr {
+			pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
new file mode 100644
index 000000000000..7fedbacdac44
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
@@ -0,0 +1,1340 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	aliases {
+		dsi0 = &disp_dsi0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		serial0 = &uart0;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		power-supply = <&ppvar_sys>;
+		pwms = <&disp_pwm0 0 500000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <100>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* The size will be filled in by the bootloader */
+		reg = <0 0x40000000 0 0>;
+	};
+
+	/* system wide LDO 1.8V power rail */
+	pp1800_ldo_z1: regulator-pp1800-ldo-z1 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_ldo_z1";
+		/* controlled by PP3300_Z1 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pp3300_z1>;
+	};
+
+	/* separately switched 3.3V power rail */
+	pp3300_s3: regulator-pp3300-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_s3";
+		/* controlled by PMIC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&pp3300_z1>;
+	};
+
+	/* system wide 3.3V power rail */
+	pp3300_z1: regulator-pp3300-z1 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z1";
+		/* controlled by PP3300_LDO_Z5 & EN_PWR_Z1 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_wlan: regulator-pp3300-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_wlan";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wlan_en>;
+		pinctrl-names = "default";
+		vin-supply = <&pp3300_z1>;
+	};
+
+	/* system wide 4.2V power rail */
+	pp4200_s5: regulator-pp4200-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp4200_s5";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide 5.0V power rail */
+	pp5000_z1: regulator-pp5000-z1 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_z1";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_usb_vbus: regulator-pp5000-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 150 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp5000_z1>;
+	};
+
+	/* system wide semi-regulated power rail from battery or USB */
+	ppvar_sys: regulator-ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	ppvar_mipi_disp_avdd: regulator-ppvar-mipi-disp-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_mipi_disp_avdd";
+		enable-active-high;
+		gpio = <&pio 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_disp_avdd_en>;
+		vin-supply = <&pp5000_z1>;
+	};
+
+	ppvar_mipi_disp_avee: regulator-ppvar-mipi-disp-avee {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_mipi_disp_avee";
+		regulator-enable-ramp-delay = <10000>;
+		enable-active-high;
+		gpio = <&pio 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_disp_avee_en>;
+		vin-supply = <&pp5000_z1>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x800000>;
+			no-map;
+		};
+
+		apu_mem: memory@55000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x55000000 0 0x1400000>;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&adsp_uart_pins>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	mediatek,etdm-out1-cowork-source = <0>; /* in1 */
+	mediatek,etdm-in2-cowork-source = <3>; /* out2 */
+	status = "okay";
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&cam_vcore {
+	domain-supply = <&mt6359_vproc1_buck_reg>;
+};
+
+/*
+ * Geralt is the reference design and doesn't have target TDP.
+ * Ciri is (currently) the only device following Geralt, and its
+ * TDP target is 90 degrees.
+ **/
+&cpu_little0_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_little1_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_little2_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_little3_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_big0_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&cpu_big1_alert0 {
+	temperature = <90000>;
+	hysteresis = <2000>;
+	type = "passive";
+};
+
+&disp_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	dsi_panel: panel@0 {
+		/* Compatible string for different panels can be found in each device dts */
+		reg = <0>;
+		enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_dsi_pins>;
+
+		backlight = <&backlight_lcd0>;
+		avdd-supply = <&ppvar_mipi_disp_avdd>;
+		avee-supply = <&ppvar_mipi_disp_avee>;
+		pp1800-supply = <&mt6359_vm18_ldo_reg>;
+		rotation = <270>;
+
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&disp_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm1_pins>;
+};
+
+&dither0_in {
+	remote-endpoint = <&postmask0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&ethdr0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ethdr0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vdosys1_ep_ext>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ethdr0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_in>;
+			};
+		};
+	};
+};
+
+&gamma0_out {
+	remote-endpoint = <&postmask0_in>;
+};
+
+&dp_intf1 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			dp_intf1_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			dp_intf1_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dptx_in>;
+			};
+		};
+	};
+};
+
+&dp_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_tx_hpd>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dptx_in: endpoint {
+				remote-endpoint = <&dp_intf1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dptx_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&mt6359_vproc2_buck_reg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tpm@50 {
+		compatible = "google,cr50";
+		reg = <0x50>;
+		interrupts-extended = <&pio 0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsc_int>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&merge5 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			merge5_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ethdr0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			merge5_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dp_intf1_in>;
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx_config0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x1481b>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sd;
+	no-sdio;
+	non-removable;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	supports-cqe;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+&mt6359codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+	mediatek,mic-type-0 = <2>; /* DMIC */
+	mediatek,mic-type-2 = <2>; /* DMIC */
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_sshub_buck_reg {
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <550000>;
+	regulator-always-on;
+};
+
+&mt6359_vio28_ldo_reg {
+	/delete-property/ regulator-always-on;
+};
+
+&mt6359_vm18_ldo_reg {
+	/delete-property/ regulator-always-on;
+};
+
+&mt6359_vmodem_buck_reg {
+	regulator-min-microvolt = <775000>;
+	regulator-max-microvolt = <775000>;
+};
+
+&mt6359_vpa_buck_reg {
+	regulator-max-microvolt = <3100000>;
+};
+
+&mt6359_vproc2_buck_reg {
+	/*
+	 * Called "ppvar_dvdd_gpu" in the schematic. Renamed to
+	 * "ppvar_dvdd_vgpu" here to match mtk-regulator-coupler requirements.
+	 */
+	regulator-name = "ppvar_dvdd_vgpu";
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-min-microvolt = <800000>;
+	regulator-max-microvolt = <800000>;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	regulator-name = "pp0850_dvdd_sram_gpu";
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	gpio-line-names =
+		"gsc_int",
+		"AP_DISP_BKLTEN",
+		"",
+		"EN_PPVAR_MIPI_DISP",
+		"EN_PPVAR_MIPI_DISP_150MA",
+		"TCHSCR_RST_1V8_L",
+		"TCHSRC_REPORT_DISABLE",
+		"",
+		"",
+		"",
+		"",
+		"I2S_SPKR_DATAOUT",
+		"EN_PP3300_WLAN_X",
+		"WIFI_KILL_1V8_L",
+		"BT_KILL_1V8_L",
+		"AP_FLASH_WP_L", /* ... is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
+		"",
+		"EDP_HPD_1V8",
+		"WCAM_PWDN_L",
+		"WCAM_RST_L",
+		"UCAM_PWDM_L",
+		"UCAM_RST_L",
+		"WCAM_24M_CLK",
+		"UCAM_24M_CLK",
+		"MT6319_INT",
+		"DISP_RST_1V8_L",
+		"DSIO_DSI_TE",
+		"EN_PP3300_EDP_DISP_X",
+		"TP",
+		"MIPI_BL_PWM_1V8",
+		"EDP_BL_PWM_1V8",
+		"UART_AP_TX_GSC_RX",
+		"UART_GSC_TX_AP_RX",
+		"UART_SSPM_TX_DBGCON_RX",
+		"UART_DBGCON_TX_SSPM_RX",
+		"UART_ADSP_TX_DBGCON_RX",
+		"UART_DBGCON_TX_ADSP_RX",
+		"JTAG_AP_TMS",
+		"JTAG_AP_TCK",
+		"JTAG_AP_TDI",
+		"JTAG_AP_TDO",
+		"JTAG_AP_TRST",
+		"AP_KPCOL0",
+		"TP",
+		"BEEP_ON_OD",
+		"TP",
+		"EC_AP_HPD_OD",
+		"PCIE_WAKE_1V8_ODL",
+		"PCIE_RST_1V8_L",
+		"PCIE_CLKREQ_1V8_ODL",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_I2C_AUD_SCL_1V8",
+		"AP_I2C_AUD_SDA_1V8",
+		"AP_I2C_TPM_SCL_1V8",
+		"AP_I2C_TPM_SDA_1V8",
+		"AP_I2C_TCHSCR_SCL_1V8",
+		"AP_I2C_TCHSCR_SDA_1V8",
+		"AP_I2C_PMIC_SAR_SCL_1V8",
+		"AP_I2C_PMIC_SAR_SDA_1V8",
+		"AP_I2C_EC_HID_KB_SCL_1V8",
+		"AP_I2C_EC_HID_KB_SDA_1V8",
+		"AP_I2C_UCAM_SCL_1V8",
+		"AP_I2C_UCAM_SDA_1V8",
+		"AP_I2C_WCAM_SCL_1V8",
+		"AP_I2C_WCAM_SDA_1V8",
+		"SPI_AP_CS_EC_L",
+		"SPI_AP_CLK_EC",
+		"SPI_AP_DO_EC_DI",
+		"SPI_AP_DI_EC_DO",
+		"TP",
+		"TP",
+		"SPI_AP_CS_TCHSCR_L",
+		"SPI_AP_CLK_TCHSCR",
+		"SPI_AP_DO_TCHSCR_DI",
+		"SPI_AP_DI_TCHSCR_DO",
+		"TP",
+		"TP",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"TP",
+		"",
+		"SAR_INT_ODL",
+		"",
+		"",
+		"",
+		"PWRAP_SPI_CS_L",
+		"PWRAP_SPI_CK",
+		"PWRAP_SPI_MOSI",
+		"PWRAP_SPI_MISO",
+		"SRCLKENA0",
+		"SRCLKENA1",
+		"SCP_VREQ_VAO",
+		"AP_RTC_CLK32K",
+		"AP_PMIC_WDTRST_L",
+		"AUD_CLK_MOSI",
+		"AUD_SYNC_MOSI",
+		"AUD_DAT_MOSI0",
+		"AUD_DAT_MOSI1",
+		"AUD_DAT_MISO0",
+		"AUD_DAT_MISO1",
+		"SD_CD_ODL",
+		"HP_INT_ODL",
+		"SPKR_INT_ODL",
+		"I2S_HP_DATAIN",
+		"EN_SPKR",
+		"I2S_SPKR_MCLK",
+		"I2S_SPKR_BCLK",
+		"I2S_HP_MCLK",
+		"I2S_HP_BCLK",
+		"I2S_HP_LRCK",
+		"I2S_HP_DATAOUT",
+		"RST_SPKR_L",
+		"I2S_SPKR_LRCK",
+		"I2S_SPKR_DATAIN",
+		"",
+		"",
+		"",
+		"",
+		"SPI_AP_CLK_ROM",
+		"SPI_AP_CS_ROM_L",
+		"SPI_AP_DO_ROM_DI",
+		"SPI_AP_DI_ROM_DO",
+		"TP",
+		"TP",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"EN_PP2800A_UCAM_X",
+		"EN_PP1200_UCAM_X",
+		"EN_PP2800A_WCAM_X",
+		"EN_PP1100_WCAM_X",
+		"TCHSCR_INT_1V8_L",
+		"EN_PP3300_MIPI_TCHSCR_X",
+		"MT7921_PMU_EN_1V8",
+		"EN_PP3300_EDP_TCHSCR_X",
+		"AP_EC_WARM_RST_REQ",
+		"EC_AP_HID_INT_ODL",
+		"EC_AP_INT_ODL",
+		"AP_XHCI_INIT_DONE",
+		"EMMC_DAT7",
+		"EMMC_DAT6",
+		"EMMC_DAT5",
+		"EMMC_DAT4",
+		"EMMC_RST_L",
+		"EMMC_CMD",
+		"EMMC_CLK",
+		"EMMC_DAT3",
+		"EMMC_DAT2",
+		"EMMC_DAT1",
+		"EMMC_DAT0",
+		"EMMC_DSL",
+		"SD_CMD",
+		"SD_CLK",
+		"SD_DAT0",
+		"SD_DAT1",
+		"SD_DAT2",
+		"SD_DAT3",
+		"",
+		"",
+		"USB3_HUB_RST_L",
+		"EC_AP_RSVD0_ODL",
+		"",
+		"",
+		"SPMI_SCL",
+		"SPMI_SDA";
+
+	adsp_uart_pins: adsp-uart-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+		};
+	};
+
+	aud_etdm_hp_on: aud-etdm-hp-on-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
+				 <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
+				 <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
+				 <PINMUX_GPIO117__FUNC_O_I2SO2_D0>;
+		};
+	};
+
+	aud_etdm_hp_off: aud-etdm-hp-off-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO110__FUNC_B_GPIO110>,
+				 <PINMUX_GPIO115__FUNC_B_GPIO115>,
+				 <PINMUX_GPIO116__FUNC_B_GPIO116>,
+				 <PINMUX_GPIO117__FUNC_B_GPIO117>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	aud_etdm_spk_on: aud-etdm-spk-on-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO11__FUNC_O_I2SO1_D0>,
+				 <PINMUX_GPIO113__FUNC_B0_TDMIN_BCK>,
+				 <PINMUX_GPIO119__FUNC_B0_TDMIN_LRCK>,
+				 <PINMUX_GPIO120__FUNC_I0_TDMIN_DI>;
+			drive-strength = <8>;
+		};
+	};
+
+	aud_etdm_spk_off: aud-etdm-spk-off-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO11__FUNC_B_GPIO11>,
+				 <PINMUX_GPIO113__FUNC_B_GPIO113>,
+				 <PINMUX_GPIO119__FUNC_B_GPIO119>,
+				 <PINMUX_GPIO120__FUNC_B_GPIO120>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	aud_mtkaif_on: aud-mtkaif-on-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>;
+		};
+	};
+
+	aud_mtkaif_off: aud-mtkaif-off-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO101__FUNC_B_GPIO101>,
+				 <PINMUX_GPIO102__FUNC_B_GPIO102>,
+				 <PINMUX_GPIO103__FUNC_B_GPIO103>,
+				 <PINMUX_GPIO104__FUNC_B_GPIO104>,
+				 <PINMUX_GPIO105__FUNC_B_GPIO105>,
+				 <PINMUX_GPIO106__FUNC_B_GPIO106>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	cros_ec_int: cros-ec-int-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO149__FUNC_B_GPIO149>;
+			input-enable;
+		};
+	};
+
+	disp_pwm0_pins: disp-pwm0-pins {
+		pins-disp-pwm0 {
+			pinmux = <PINMUX_GPIO29__FUNC_O_DISP_PWM0>;
+			output-high;
+		};
+	};
+
+	disp_pwm1_pins: disp-pwm1-pins {
+		pins-disp-pwm1 {
+			pinmux = <PINMUX_GPIO30__FUNC_O_DISP_PWM1>;
+			output-high;
+		};
+	};
+
+	dp_tx_hpd: dp-tx-hpd-pins {
+		pins-dp-tx-hpd {
+			pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
+		};
+	};
+
+	gsc_int: gsc-int-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-disable;
+			drive-strength = <12>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+		};
+	};
+
+	mipi_disp_avdd_en: mipi-disp-avdd-en-pins {
+		pins-en-ppvar-mipi-disp {
+			pinmux = <PINMUX_GPIO3__FUNC_B_GPIO3>;
+			output-low;
+		};
+	};
+
+	mipi_disp_avee_en: mipi-disp-avee-en-pins {
+		pins-en-ppvar-mipi-disp-150ma {
+			pinmux = <PINMUX_GPIO4__FUNC_B_GPIO4>;
+			output-low;
+		};
+	};
+
+	mipi_dsi_pins: mipi-dsi-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO1__FUNC_B_GPIO1>,
+				 <PINMUX_GPIO25__FUNC_B_GPIO25>;
+			output-low;
+		};
+	};
+
+	mmc0_pins_default: mmc0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins: nor-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins-cs {
+			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>;
+			bias-pull-up;
+		};
+	};
+
+	pcie_pins: pcie-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
+				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
+				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
+		};
+	};
+
+	scp_pins: scp-pins {
+		pins-scp-vreq {
+			pinmux = <PINMUX_GPIO98__FUNC_O_SCP_VREQ_VAO>;
+			bias-disable;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins_default: spi1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins_sleep: spi1-sleep-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO75__FUNC_B_GPIO75>,
+				 <PINMUX_GPIO76__FUNC_B_GPIO76>,
+				 <PINMUX_GPIO77__FUNC_B_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_B_GPIO78>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_en: wlan-en-pins {
+		pins-en-pp3300-wlan {
+			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+			output-low;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&postmask0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&postmask0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+	firmware-name = "mediatek/mt8188/scp.img";
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
+&sound {
+	pinctrl-names = "aud_etdm_hp_on", "aud_etdm_hp_off",
+			"aud_etdm_spk_on", "aud_etdm_spk_off",
+			"aud_mtkaif_on", "aud_mtkaif_off";
+	pinctrl-0 = <&aud_etdm_hp_on>;
+	pinctrl-1 = <&aud_etdm_hp_off>;
+	pinctrl-2 = <&aud_etdm_spk_on>;
+	pinctrl-3 = <&aud_etdm_spk_off>;
+	pinctrl-4 = <&aud_mtkaif_on>;
+	pinctrl-5 = <&aud_mtkaif_off>;
+	mediatek,adsp = <&adsp>;
+	/* The audio-routing is defined in each board dts */
+
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 149 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cros_ec_int>;
+		spi-max-frequency = <3000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		cbas {
+			compatible = "google,cros-cbas";
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_default>;
+	pinctrl-1 = <&spi1_pins_sleep>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+/* USB detachable base */
+&ssusb0 {
+	dr_mode = "host";
+	vusb33-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&xhci0 {
+	/* controlled by EC */
+	vbus-supply = <&pp3300_z1>;
+	status = "okay";
+};
+
+/* USB3 hub */
+&ssusb1 {
+	dr_mode = "host";
+	vusb33-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&pp3300_s3>;
+	vbus-supply = <&pp5000_usb_vbus>;
+	status = "okay";
+};
+
+/* USB BT */
+&ssusb2 {
+	dr_mode = "host";
+	vusb33-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+&vdosys1 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys1_ep_ext: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ethdr0_in>;
+		};
+	};
+};
+
+&xhci2 {
+	/* no power supply since MT7921's power is controlled by PCIe */
+	/* MT7921's USB BT has issues with USB2 LPM */
+	usb2-lpm-disable;
+	status = "okay";
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index faccc7f16259..90c388f1890f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -26,9 +26,11 @@
 	aliases {
 		dp-intf0 = &dp_intf0;
 		dp-intf1 = &dp_intf1;
+		dsc0 = &dsc0;
 		ethdr0 = &ethdr0;
 		gce0 = &gce0;
 		gce1 = &gce1;
+		merge0 = &merge0;
 		merge1 = &merge1;
 		merge2 = &merge2;
 		merge3 = &merge3;
@@ -492,7 +494,7 @@
 			};
 
 			cooling-maps {
-				map0 {
+				cpu_little0_cooling_map0: map0 {
 					trip = <&cpu_little0_alert0>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -530,7 +532,7 @@
 			};
 
 			cooling-maps {
-				map0 {
+				cpu_little1_cooling_map0: map0 {
 					trip = <&cpu_little1_alert0>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -568,7 +570,7 @@
 			};
 
 			cooling-maps {
-				map0 {
+				cpu_little2_cooling_map0: map0 {
 					trip = <&cpu_little2_alert0>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -606,7 +608,7 @@
 			};
 
 			cooling-maps {
-				map0 {
+				cpu_little3_cooling_map0: map0 {
 					trip = <&cpu_little3_alert0>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -1380,19 +1382,37 @@
 			clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>;
 		};
 
-		scp: scp@10500000 {
-			compatible = "mediatek,mt8188-scp";
-			reg = <0 0x10500000 0 0x100000>,
-			      <0 0x10720000 0 0xe0000>;
-			reg-names = "sram", "cfg";
-			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+		scp_cluster: scp@10720000 {
+			compatible = "mediatek,mt8188-scp-dual";
+			reg = <0 0x10720000 0 0xe0000>;
+			reg-names = "cfg";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x10500000 0x100000>;
+			status = "disabled";
+
+			scp_c0: scp@0 {
+				compatible = "mediatek,scp-core";
+				reg = <0x0 0xd0000>;
+				reg-names = "sram";
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+			};
+
+			scp_c1: scp@d0000 {
+				compatible = "mediatek,scp-core";
+				reg = <0xd0000 0x2f000>;
+				reg-names = "sram";
+				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+			};
 		};
 
 		afe: audio-controller@10b10000 {
 			compatible = "mediatek,mt8188-afe";
 			reg = <0 0x10b10000 0 0x10000>;
 			assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP>;
-			assigned-clock-parents =  <&clk26m>;
+			assigned-clock-parents = <&topckgen CLK_TOP_APLL1_D4>;
 			clocks = <&clk26m>,
 				 <&apmixedsys CLK_APMIXED_APLL1>,
 				 <&apmixedsys CLK_APMIXED_APLL2>,
@@ -1647,6 +1667,38 @@
 			status = "disabled";
 		};
 
+		ssusb1: usb@11201000 {
+			compatible = "mediatek,mt8188-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			ranges = <0 0 0 0x11200000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x468 2>;
+			status = "disabled";
+
+			xhci1: usb@0 {
+				compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
+		};
+
 		eth: ethernet@11021000 {
 			compatible = "mediatek,mt8188-gmac", "mediatek,mt8195-gmac",
 				     "snps,dwmac-5.10a";
@@ -1744,27 +1796,6 @@
 			};
 		};
 
-		xhci1: usb@11200000 {
-			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
-			reg = <0 0x11200000 0 0x1000>,
-			      <0 0x11203e00 0 0x0100>;
-			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port1 PHY_TYPE_USB2>,
-			       <&u3port1 PHY_TYPE_USB3>;
-			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
-					  <&topckgen CLK_TOP_SSUSB_XHCI>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
-			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
-				 <&topckgen CLK_TOP_SSUSB_TOP_REF>,
-				 <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x468 2>;
-			wakeup-source;
-			status = "disabled";
-		};
-
 		mmc0: mmc@11230000 {
 			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
 			reg = <0 0x11230000 0 0x10000>,
@@ -1792,6 +1823,20 @@
 			status = "disabled";
 		};
 
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11250000 0 0x1000>,
+			      <0 0x11e60000 0 0x1000>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_2>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC2>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC30_2>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_2>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
 		lvts_mcu: thermal-sensor@11278000 {
 			compatible = "mediatek,mt8188-lvts-mcu";
 			reg = <0 0x11278000 0 0x1000>;
@@ -1851,42 +1896,68 @@
 			#clock-cells = <1>;
 		};
 
-		xhci2: usb@112a0000 {
-			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
-			reg = <0 0x112a0000 0 0x1000>,
-			      <0 0x112a3e00 0 0x0100>;
+		ssusb2: usb@112a1000 {
+			compatible = "mediatek,mt8188-mtu3", "mediatek,mtu3";
+			reg = <0 0x112a1000 0 0x2dff>, <0 0x112a3e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port2 PHY_TYPE_USB2>;
-			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>,
-					  <&topckgen CLK_TOP_USB_TOP_3P>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x112a0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
 			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
 				 <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x470 2>;
 			status = "disabled";
+
+			xhci2: usb@0 {
+				compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
 		};
 
-		xhci0: usb@112b0000 {
-			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
-			reg = <0 0x112b0000 0 0x1000>,
-			      <0 0x112b3e00 0 0x0100>;
+		ssusb0: usb@112b1000 {
+			compatible = "mediatek,mt8188-mtu3", "mediatek,mtu3";
+			reg = <0 0x112b1000 0 0x2dff>, <0 0x112b3e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port0 PHY_TYPE_USB2>;
-			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>,
-					  <&topckgen CLK_TOP_USB_TOP_2P>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x112b0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
 			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
 				 <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x460 2>;
+			phys = <&u2port0 PHY_TYPE_USB2>;
 			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x460 2>;
 			status = "disabled";
+
+			xhci0: usb@0 {
+				compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
 		};
 
 		pcie: pcie@112f0000 {
@@ -2112,7 +2183,7 @@
 		};
 
 		efuse: efuse@11f20000 {
-			compatible = "mediatek,mt8188-efuse", "mediatek,efuse";
+			compatible = "mediatek,mt8188-efuse", "mediatek,mt8186-efuse";
 			reg = <0 0x11f20000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -2125,6 +2196,11 @@
 				reg = <0x1ac 0x40>;
 			};
 
+			gpu_speedbin: gpu-speedbin@581 {
+				reg = <0x581 0x1>;
+				bits = <0 3>;
+			};
+
 			socinfo-data1@7a0 {
 				reg = <0x7a0 0x4>;
 			};
@@ -2143,6 +2219,8 @@
 				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH 0>,
 				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "job", "mmu", "gpu";
+			nvmem-cells = <&gpu_speedbin>;
+			nvmem-cell-names = "speed-bin";
 			operating-points-v2 = <&gpu_opp_table>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_MFG2>,
 					<&spm MT8188_POWER_DOMAIN_MFG3>,
@@ -2164,6 +2242,118 @@
 			#clock-cells = <1>;
 		};
 
+		dma-controller@14001000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+			mboxes = <&gce0 13 CMDQ_THR_PRIO_1>,
+				 <&gce0 14 CMDQ_THR_PRIO_1>,
+				 <&gce0 16 CMDQ_THR_PRIO_1>,
+				 <&gce0 21 CMDQ_THR_PRIO_1>,
+				 <&gce0 22 CMDQ_THR_PRIO_1>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+			mediatek,scp = <&scp_c0>;
+		};
+
+		display@14002000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+		};
+
+		display@14004000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14004000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+		};
+
+		display@14005000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+		};
+
+		display@14006000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14006000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14007000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14007000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+		};
+
+		display@14008000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+		};
+
+		display@14009000 {
+			compatible = "mediatek,mt8188-mdp3-ovl", "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_OVL>;
+		};
+
+		display@1400a000 {
+			compatible = "mediatek,mt8188-mdp3-padding", "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x1400a000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_PADDING>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+		};
+
+		display@1400b000 {
+			compatible = "mediatek,mt8188-mdp3-tcc", "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+		};
+
+		display@1400c000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x1400c000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+			iommus = <&vpp_iommu M4U_PORT_L4_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+		};
+
+		mutex@1400f000 {
+			compatible = "mediatek,mt8188-vpp-mutex";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_MUTEX>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xf000 0x1000>;
+		};
+
 		vpp_smi_common: smi@14012000 {
 			compatible = "mediatek,mt8188-smi-common-vpp";
 			reg = <0 0x14012000 0 0x1000>;
@@ -2195,6 +2385,184 @@
 			mediatek,larbs = <&larb1 &larb3 &larb4 &larb6 &larb7 &larb23>;
 		};
 
+		dma-controller@14f09000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14f09000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+			iommus = <&vdo_iommu M4U_PORT_L5_SVPP2_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+		};
+
+		dma-controller@14f0a000 {
+			compatible = "mediatek,mt8188-mdp3-rdma";
+			reg = <0 0x14f0a000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+			iommus = <&vpp_iommu M4U_PORT_L6_SVPP3_MDP_RDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+		};
+
+		display@14f0c000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0c000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+		};
+
+		display@14f0d000 {
+			compatible = "mediatek,mt8188-mdp3-fg", "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0d000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+		};
+
+		display@14f0f000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0f000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+		};
+
+		display@14f10000 {
+			compatible = "mediatek,mt8188-mdp3-hdr", "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f10000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+		};
+
+		display@14f12000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f12000 0 0x1000>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+		};
+
+		display@14f13000 {
+			compatible = "mediatek,mt8188-mdp3-aal", "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f13000 0 0x1000>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+		};
+
+		display@14f15000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f15000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14f16000 {
+			compatible = "mediatek,mt8188-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f16000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+		};
+
+		display@14f18000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f18000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+		};
+
+		display@14f19000 {
+			compatible = "mediatek,mt8188-mdp3-tdshp", "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f19000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+		};
+
+		display@14f1a000 {
+			compatible = "mediatek,mt8188-mdp3-merge", "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1a000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+		};
+
+		display@14f1b000 {
+			compatible = "mediatek,mt8188-mdp3-merge", "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1b000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+		};
+
+		display@14f1d000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1d000 0 0x1000>;
+			interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+		};
+
+		display@14f1e000 {
+			compatible = "mediatek,mt8188-mdp3-color", "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1e000 0 0x1000>;
+			interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+		};
+
+		display@14f21000 {
+			compatible = "mediatek,mt8188-mdp3-padding",
+				     "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f21000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+		};
+
+		display@14f22000 {
+			compatible = "mediatek,mt8188-mdp3-padding",
+				     "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f22000 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+		};
+
+		display@14f24000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f24000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+			iommus = <&vdo_iommu M4U_PORT_L5_SVPP2_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+		};
+
+		display@14f25000 {
+			compatible = "mediatek,mt8188-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f25000 0 0x1000>;
+			#dma-cells = <1>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+			iommus = <&vpp_iommu M4U_PORT_L6_SVPP3_MDP_WROT>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+		};
+
 		wpesys: clock-controller@14e00000 {
 			compatible = "mediatek,mt8188-wpesys";
 			reg = <0 0x14e00000 0 0x1000>;
@@ -2224,6 +2592,15 @@
 			#clock-cells = <1>;
 		};
 
+		mutex@14f01000 {
+			compatible = "mediatek,mt8188-vpp-mutex";
+			reg = <0 0x14f01000 0 0x1000>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_DISP_MUTEX>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VPPSYS1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x1000 0x1000>;
+		};
+
 		larb5: smi@14f02000 {
 			compatible = "mediatek,mt8188-smi-larb";
 			reg = <0 0x14f02000 0 0x1000>;
@@ -2256,36 +2633,42 @@
 			compatible = "mediatek,mt8188-imgsys1-dip-top";
 			reg = <0 0x15110000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		imgsys1_dip_nr: clock-controller@15130000 {
 			compatible = "mediatek,mt8188-imgsys1-dip-nr";
 			reg = <0 0x15130000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		imgsys_wpe1: clock-controller@15220000 {
 			compatible = "mediatek,mt8188-imgsys-wpe1";
 			reg = <0 0x15220000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		ipesys: clock-controller@15330000 {
 			compatible = "mediatek,mt8188-ipesys";
 			reg = <0 0x15330000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		imgsys_wpe2: clock-controller@15520000 {
 			compatible = "mediatek,mt8188-imgsys-wpe2";
 			reg = <0 0x15520000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		imgsys_wpe3: clock-controller@15620000 {
 			compatible = "mediatek,mt8188-imgsys-wpe3";
 			reg = <0 0x15620000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		camsys: clock-controller@16000000 {
@@ -2298,24 +2681,28 @@
 			compatible = "mediatek,mt8188-camsys-rawa";
 			reg = <0 0x1604f000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		camsys_yuva: clock-controller@1606f000 {
 			compatible = "mediatek,mt8188-camsys-yuva";
 			reg = <0 0x1606f000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		camsys_rawb: clock-controller@1608f000 {
 			compatible = "mediatek,mt8188-camsys-rawb";
 			reg = <0 0x1608f000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		camsys_yuvb: clock-controller@160af000 {
 			compatible = "mediatek,mt8188-camsys-yuvb";
 			reg = <0 0x160af000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		ccusys: clock-controller@17200000 {
@@ -2331,7 +2718,7 @@
 			iommus = <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			mediatek,scp = <&scp>;
+			mediatek,scp = <&scp_c0>;
 
 			video-codec@10000 {
 				compatible = "mediatek,mtk-vcodec-lat";
@@ -2455,7 +2842,7 @@
 				 <&vdo_iommu M4U_PORT_L19_VENC_SUB_W_LUMA>,
 				 <&vdo_iommu M4U_PORT_L19_VENC_SUB_R_LUMA>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VENC>;
-			mediatek,scp = <&scp>;
+			mediatek,scp = <&scp_c0>;
 		};
 
 		jpeg_encoder: jpeg-encoder@1a030000 {
@@ -2488,13 +2875,30 @@
 		};
 
 		ovl0: ovl@1c000000 {
-			compatible = "mediatek,mt8188-disp-ovl", "mediatek,mt8183-disp-ovl";
+			compatible = "mediatek,mt8188-disp-ovl", "mediatek,mt8195-disp-ovl";
 			reg = <0 0x1c000000 0 0x1000>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
 			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
 			iommus = <&vdo_iommu M4U_PORT_L0_DISP_OVL0_RDMA0>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
 		};
 
 		rdma0: rdma@1c002000 {
@@ -2502,9 +2906,28 @@
 			reg = <0 0x1c002000 0 0x1000>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
 			interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
-			iommus = <&vdo_iommu M4U_PORT_L1_DISP_RDMA0>;
+			iommus = <&vpp_iommu M4U_PORT_L1_DISP_RDMA0>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
 		};
 
 		color0: color@1c003000 {
@@ -2514,6 +2937,25 @@
 			interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
 		};
 
 		ccorr0: ccorr@1c004000 {
@@ -2523,6 +2965,25 @@
 			interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
 		};
 
 		aal0: aal@1c005000 {
@@ -2532,6 +2993,25 @@
 			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
 		};
 
 		gamma0: gamma@1c006000 {
@@ -2541,6 +3021,23 @@
 			interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					gamma0_out: endpoint { };
+				};
+			};
 		};
 
 		dither0: dither@1c007000 {
@@ -2550,6 +3047,21 @@
 			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dither0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					dither0_out: endpoint { };
+				};
+			};
 		};
 
 		disp_dsi0: dsi@1c008000 {
@@ -2567,6 +3079,15 @@
 			status = "disabled";
 		};
 
+		dsc0: dsc@1c009000 {
+			compatible = "mediatek,mt8188-disp-dsc", "mediatek,mt8195-disp-dsc";
+			reg = <0 0x1c009000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
+		};
+
 		disp_dsi1: dsi@1c012000 {
 			compatible = "mediatek,mt8188-dsi";
 			reg = <0 0x1c012000 0 0x1000>;
@@ -2582,6 +3103,17 @@
 			status = "disabled";
 		};
 
+		merge0: merge0@1c014000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c014000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_VPP_MERGE0>,
+				 <&vdosys1 CLK_VDO1_MERGE_VDO1_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>;
+		};
+
 		dp_intf0: dp-intf@1c015000 {
 			compatible = "mediatek,mt8188-dp-intf";
 			reg = <0 0x1c015000 0 0x1000>;
@@ -2612,6 +3144,21 @@
 			interrupts = <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					postmask0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					postmask0_out: endpoint { };
+				};
+			};
 		};
 
 		vdosys0: syscon@1c01d000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts
deleted file mode 100644
index cd86ad9ba28a..000000000000
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2022 Google LLC
- */
-/dts-v1/;
-#include "mt8192-asurada.dtsi"
-
-/ {
-	model = "Google Hayato rev5";
-	chassis-type = "convertible";
-	compatible = "google,hayato-rev5-sku2", "google,hayato-sku2",
-		     "google,hayato", "mediatek,mt8192";
-};
-
-&keyboard_controller {
-	function-row-physmap = <
-		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
-		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
-		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
-		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
-		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
-		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
-		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
-		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
-		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
-		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
-	>;
-	linux,keymap = <
-		MATRIX_KEY(0x00, 0x02, KEY_BACK)
-		MATRIX_KEY(0x03, 0x02, KEY_FORWARD)
-		MATRIX_KEY(0x02, 0x02, KEY_REFRESH)
-		MATRIX_KEY(0x01, 0x02, KEY_FULL_SCREEN)
-		MATRIX_KEY(0x03, 0x04, KEY_SCALE)
-		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
-		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
-		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
-		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
-		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
-
-		CROS_STD_MAIN_KEYMAP
-	>;
-};
-
-&rt5682 {
-	compatible = "realtek,rt5682s";
-};
-
-&sound {
-	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682s";
-
-	speaker-codecs {
-		sound-dai = <&rt1015p>;
-	};
-
-	headset-codec {
-		sound-dai = <&rt5682 0>;
-	};
-};
-
-&touchscreen {
-	compatible = "hid-over-i2c";
-	post-power-on-delay-ms = <10>;
-	hid-descr-addr = <0x0001>;
-	vdd-supply = <&pp3300_u>;
-};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
index 8c485c3ced2c..163960f58db5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
@@ -85,8 +85,15 @@
 	trackpad@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
 		hid-descr-addr = <0x20>;
 		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 		wakeup-source;
+		status = "fail-needs-probe";
 	};
 };
+
+&trackpad {
+	status = "fail-needs-probe";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts
deleted file mode 100644
index 5e9e598bab90..000000000000
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2022 Google LLC
- */
-/dts-v1/;
-#include "mt8192-asurada.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Google Spherion (rev4)";
-	chassis-type = "laptop";
-	compatible = "google,spherion-rev4", "google,spherion",
-		     "mediatek,mt8192";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		led {
-			function = LED_FUNCTION_KBD_BACKLIGHT;
-			color = <LED_COLOR_ID_WHITE>;
-			pwms = <&cros_ec_pwm 0>;
-			max-brightness = <1023>;
-		};
-	};
-};
-
-&cros_ec_pwm {
-	status = "okay";
-};
-
-&keyboard_controller {
-	function-row-physmap = <
-		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
-		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
-		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
-		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
-		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
-		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
-		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
-		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
-		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
-		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
-	>;
-	linux,keymap = <
-		MATRIX_KEY(0x00, 0x02, KEY_BACK)
-		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
-		MATRIX_KEY(0x02, 0x02, KEY_FULL_SCREEN)
-		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
-		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
-		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
-		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
-		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
-		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
-		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
-
-		CROS_STD_MAIN_KEYMAP
-	>;
-};
-
-&rt5682 {
-	compatible = "realtek,rt5682s";
-};
-
-&sound {
-	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682s";
-
-	speaker-codecs {
-		sound-dai = <&rt1015p>;
-	};
-
-	headset-codec {
-		sound-dai = <&rt5682 0>;
-	};
-};
-
-&touchscreen {
-	compatible = "elan,ekth3500";
-};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 8dda8b63765b..0b4664f044a1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -199,6 +199,13 @@
 		#size-cells = <2>;
 		ranges;
 
+		afe_dma_mem: audio-dma-pool {
+			compatible = "shared-dma-pool";
+			size = <0 0x100000>;
+			alignment = <0 0x10>;
+			no-map;
+		};
+
 		scp_mem_reserved: scp@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
@@ -276,6 +283,10 @@
 	};
 };
 
+&afe {
+	memory-region = <&afe_dma_mem>;
+};
+
 &dsi0 {
 	status = "okay";
 };
@@ -335,11 +346,13 @@
 	clock-frequency = <400000>;
 	clock-stretch-ns = <12600>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>, <&trackpad_pins>;
+	pinctrl-0 = <&i2c2_pins>;
 
-	trackpad@15 {
+	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
 		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
 		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 		vcc-supply = <&pp3300_u>;
 		wakeup-source;
@@ -1418,7 +1431,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@@ -1428,7 +1440,6 @@
 			};
 
 			mt6315_6_vbuck3: vbuck3 {
-				regulator-compatible = "vbuck3";
 				regulator-name = "Vlcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@@ -1445,7 +1456,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <800000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
index a82d716f10d4..a50b4e8efaba 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -13,6 +13,7 @@
 &audio_codec {
 	compatible = "realtek,rt5682i";
 	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_z5>;
 };
 
 &sound {
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 2d6522c144b7..a8657c0068d5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -13,6 +13,7 @@
 &audio_codec {
 	compatible = "realtek,rt5682i";
 	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_z5>;
 };
 
 &pio_default {
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 2c7b2223ee76..b3761b80cac7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -297,12 +297,29 @@
 	cpu-supply = <&mt6315_6_vbuck1>;
 };
 
+&dither0_out {
+	remote-endpoint = <&dsc0_in>;
+};
+
 &dp_intf0 {
 	status = "okay";
 
-	port {
-		dp_intf0_out: endpoint {
-			remote-endpoint = <&edp_in>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dp_intf0_in: endpoint {
+				remote-endpoint = <&merge0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dp_intf0_out: endpoint {
+				remote-endpoint = <&edp_in>;
+			};
 		};
 	};
 };
@@ -310,9 +327,51 @@
 &dp_intf1 {
 	status = "okay";
 
-	port {
-		dp_intf1_out: endpoint {
-			remote-endpoint = <&dptx_in>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			dp_intf1_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			dp_intf1_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dptx_in>;
+			};
+		};
+	};
+};
+
+&dsc0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsc0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsc0_out: endpoint {
+				remote-endpoint = <&merge0_in>;
+			};
 		};
 	};
 };
@@ -357,6 +416,35 @@
 	};
 };
 
+&ethdr0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ethdr0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vdosys1_ep_ext>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ethdr0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_in>;
+			};
+		};
+	};
+};
+
 &disp_pwm0 {
 	status = "okay";
 
@@ -376,8 +464,12 @@
 		#size-cells = <0>;
 
 		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			reg = <0>;
-			dptx_in: endpoint {
+
+			dptx_in: endpoint@1 {
+				reg = <1>;
 				remote-endpoint = <&dp_intf1_out>;
 			};
 		};
@@ -442,8 +534,9 @@
 		realtek,jd-src = <1>;
 
 		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
 		MICVDD-supply = <&pp3300_z2>;
-		VBAT-supply = <&pp3300_z5>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
 	};
 };
 
@@ -511,6 +604,56 @@
 	};
 };
 
+&merge0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			merge0_in: endpoint {
+				remote-endpoint = <&dsc0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			merge0_out: endpoint {
+				remote-endpoint = <&dp_intf0_in>;
+			};
+		};
+	};
+};
+
+&merge5 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			merge5_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ethdr0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			merge5_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dp_intf1_in>;
+			};
+		};
+	};
+};
+
 &mfg0 {
 	domain-supply = <&mt6315_7_vbuck1>;
 };
@@ -612,6 +755,10 @@
 	};
 };
 
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
 &pcie1 {
 	status = "okay";
 
@@ -1285,7 +1432,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@@ -1303,7 +1449,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
@@ -1365,6 +1510,18 @@
 	status = "okay";
 };
 
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
 /*
  * For the USB Type-C ports the role and alternate modes switching is
  * done by the EC so we set dr_mode to host to avoid interfering.
@@ -1387,6 +1544,18 @@
 	status = "okay";
 };
 
+&vdosys1 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys1_ep_ext: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ethdr0_in>;
+		};
+	};
+};
+
 &xhci0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 31d424b8fc7c..1f59b5786b81 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -109,6 +109,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth_default_pins>;
 	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
 	status = "okay";
 
 	mdio {
@@ -137,7 +138,6 @@
 			richtek,vinovp-microvolt = <14500000>;
 
 			otg_vbus_regulator: usb-otg-vbus-regulator {
-				regulator-compatible = "usb-otg-vbus";
 				regulator-name = "usb-otg-vbus";
 				regulator-min-microvolt = <4425000>;
 				regulator-max-microvolt = <5825000>;
@@ -149,7 +149,6 @@
 			LDO_VIN3-supply = <&mt6360_buck2>;
 
 			mt6360_buck1: buck1 {
-				regulator-compatible = "BUCK1";
 				regulator-name = "mt6360,buck1";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -160,7 +159,6 @@
 			};
 
 			mt6360_buck2: buck2 {
-				regulator-compatible = "BUCK2";
 				regulator-name = "mt6360,buck2";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -171,7 +169,6 @@
 			};
 
 			mt6360_ldo1: ldo1 {
-				regulator-compatible = "LDO1";
 				regulator-name = "mt6360,ldo1";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -180,7 +177,6 @@
 			};
 
 			mt6360_ldo2: ldo2 {
-				regulator-compatible = "LDO2";
 				regulator-name = "mt6360,ldo2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -189,7 +185,6 @@
 			};
 
 			mt6360_ldo3: ldo3 {
-				regulator-compatible = "LDO3";
 				regulator-name = "mt6360,ldo3";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -198,7 +193,6 @@
 			};
 
 			mt6360_ldo5: ldo5 {
-				regulator-compatible = "LDO5";
 				regulator-name = "mt6360,ldo5";
 				regulator-min-microvolt = <2700000>;
 				regulator-max-microvolt = <3600000>;
@@ -207,7 +201,6 @@
 			};
 
 			mt6360_ldo6: ldo6 {
-				regulator-compatible = "LDO6";
 				regulator-name = "mt6360,ldo6";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@@ -216,7 +209,6 @@
 			};
 
 			mt6360_ldo7: ldo7 {
-				regulator-compatible = "LDO7";
 				regulator-name = "mt6360,ldo7";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index ade685ed2190..c7adafaa8328 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -617,22 +617,6 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8195_POWER_DOMAIN_VDEC1 {
-						reg = <MT8195_POWER_DOMAIN_VDEC1>;
-						clocks = <&vdecsys CLK_VDEC_LARB1>;
-						clock-names = "vdec1-0";
-						mediatek,infracfg = <&infracfg_ao>;
-						#power-domain-cells = <0>;
-					};
-
-					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
-						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
-						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
-						clock-names = "venc1-larb";
-						mediatek,infracfg = <&infracfg_ao>;
-						#power-domain-cells = <0>;
-					};
-
 					power-domain@MT8195_POWER_DOMAIN_VDOSYS0 {
 						reg = <MT8195_POWER_DOMAIN_VDOSYS0>;
 						clocks = <&topckgen CLK_TOP_CFG_VDO0>,
@@ -678,15 +662,25 @@
 							clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
 							clock-names = "vdec0-0";
 							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#power-domain-cells = <0>;
-						};
 
-						power-domain@MT8195_POWER_DOMAIN_VDEC2 {
-							reg = <MT8195_POWER_DOMAIN_VDEC2>;
-							clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
-							clock-names = "vdec2-0";
-							mediatek,infracfg = <&infracfg_ao>;
-							#power-domain-cells = <0>;
+							power-domain@MT8195_POWER_DOMAIN_VDEC1 {
+								reg = <MT8195_POWER_DOMAIN_VDEC1>;
+								clocks = <&vdecsys CLK_VDEC_LARB1>;
+								clock-names = "vdec1-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_VDEC2 {
+								reg = <MT8195_POWER_DOMAIN_VDEC2>;
+								clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+								clock-names = "vdec2-0";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
 						};
 
 						power-domain@MT8195_POWER_DOMAIN_VENC {
@@ -694,7 +688,17 @@
 							clocks = <&vencsys CLK_VENC_LARB>;
 							clock-names = "venc0-larb";
 							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
 							#power-domain-cells = <0>;
+
+							power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
+								reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+								clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+								clock-names = "venc1-larb";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
 						};
 
 						power-domain@MT8195_POWER_DOMAIN_VDOSYS1 {
@@ -1426,6 +1430,31 @@
 			status = "disabled";
 		};
 
+		ufshci: ufshci@11270000 {
+			compatible = "mediatek,mt8195-ufshci";
+			reg = <0 0x11270000 0 0x2300>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&ufsphy>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AES_UFSFDE>,
+				 <&infracfg_ao CLK_INFRA_AO_AES>,
+				 <&infracfg_ao CLK_INFRA_AO_UFS_TICK>,
+				 <&infracfg_ao CLK_INFRA_AO_UNIPRO_SYS>,
+				 <&infracfg_ao CLK_INFRA_AO_UNIPRO_TICK>,
+				 <&infracfg_ao CLK_INFRA_AO_UFS_MP_SAP_B>,
+				 <&infracfg_ao CLK_INFRA_AO_UFS_TX_SYMBOL>,
+				 <&infracfg_ao CLK_INFRA_AO_PERI_UFS_MEM_SUB>;
+			clock-names = "ufs", "ufs_aes", "ufs_tick",
+					"unipro_sysclk", "unipro_tick",
+					"unipro_mp_bclk", "ufs_tx_symbol",
+					"ufs_mem_sub";
+			freq-table-hz = <0 0>, <0 0>, <0 0>,
+					<0 0>, <0 0>, <0 0>,
+					<0 0>, <0 0>;
+
+			mediatek,ufs-disable-mcq;
+			status = "disabled";
+		};
+
 		lvts_mcu: thermal-sensor@11278000 {
 			compatible = "mediatek,mt8195-lvts-mcu";
 			reg = <0 0x11278000 0 0x1000>;
@@ -1559,9 +1588,6 @@
 
 			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
 
-			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
-			reset-names = "mac";
-
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
@@ -1611,9 +1637,6 @@
 			phy-names = "pcie-phy";
 			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
 
-			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
-			reset-names = "mac";
-
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
@@ -3013,7 +3036,7 @@
 			#size-cells = <2>;
 		};
 
-		jpgdec-master {
+		jpeg-decoder@1a040000 {
 			compatible = "mediatek,mt8195-jpgdec";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
 			iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
@@ -3024,11 +3047,12 @@
 				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
+			ranges = <0 0 0 0x1a040000 0 0x20000>,
+				 <1 0 0 0x1b040000 0 0x10000>;
 
-			jpgdec@1a040000 {
+			jpgdec@0,0 {
 				compatible = "mediatek,mt8195-jpgdec-hw";
-				reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+				reg = <0 0 0 0x10000>;/* JPGDEC_C0 */
 				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
@@ -3041,9 +3065,9 @@
 				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
 			};
 
-			jpgdec@1a050000 {
+			jpgdec@0,10000 {
 				compatible = "mediatek,mt8195-jpgdec-hw";
-				reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+				reg = <0 0x10000 0 0x10000>;/* JPGDEC_C1 */
 				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
@@ -3056,9 +3080,9 @@
 				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
 			};
 
-			jpgdec@1b040000 {
+			jpgdec@1,0 {
 				compatible = "mediatek,mt8195-jpgdec-hw";
-				reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+				reg = <1 0 0 0x10000>;/* JPGDEC_C2 */
 				iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
 					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
 					 <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
@@ -3087,7 +3111,7 @@
 		};
 
 
-		jpgenc-master {
+		jpeg-encoder@1a030000 {
 			compatible = "mediatek,mt8195-jpgenc";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
 			iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
@@ -3096,11 +3120,12 @@
 					<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
+			ranges = <0 0 0 0x1a030000 0 0x10000>,
+				 <1 0 0 0x1b030000 0 0x10000>;
 
-			jpgenc@1a030000 {
+			jpgenc@0,0 {
 				compatible = "mediatek,mt8195-jpgenc-hw";
-				reg = <0 0x1a030000 0 0x10000>;
+				reg = <0 0 0 0x10000>;
 				iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
 						<&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
 						<&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
@@ -3111,9 +3136,9 @@
 				power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
 			};
 
-			jpgenc@1b030000 {
+			jpgenc@1,0 {
 				compatible = "mediatek,mt8195-jpgenc-hw";
-				reg = <0 0x1b030000 0 0x10000>;
+				reg = <1 0 0 0x10000>;
 				iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
 						<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
 						<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
@@ -3138,13 +3163,30 @@
 		};
 
 		ovl0: ovl@1c000000 {
-			compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl";
+			compatible = "mediatek,mt8195-disp-ovl";
 			reg = <0 0x1c000000 0 0x1000>;
 			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
 			iommus = <&iommu_vdo M4U_PORT_L0_DISP_OVL0_RDMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl0_in: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
 		};
 
 		rdma0: rdma@1c002000 {
@@ -3155,6 +3197,25 @@
 			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
 			iommus = <&iommu_vdo M4U_PORT_L0_DISP_RDMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
 		};
 
 		color0: color@1c003000 {
@@ -3164,6 +3225,25 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_COLOR0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
 		};
 
 		ccorr0: ccorr@1c004000 {
@@ -3173,6 +3253,25 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_CCORR0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
 		};
 
 		aal0: aal@1c005000 {
@@ -3182,6 +3281,25 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_AAL0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
 		};
 
 		gamma0: gamma@1c006000 {
@@ -3191,6 +3309,25 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_GAMMA0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					gamma0_out: endpoint {
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
 		};
 
 		dither0: dither@1c007000 {
@@ -3200,6 +3337,23 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_DITHER0>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dither0_in: endpoint {
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dither0_out: endpoint { };
+				};
+			};
 		};
 
 		dsi0: dsi@1c008000 {
@@ -3252,6 +3406,7 @@
 			compatible = "mediatek,mt8195-dp-intf";
 			reg = <0 0x1c015000 0 0x1000>;
 			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
 				 <&vdosys0  CLK_VDO0_DP_INTF0>,
 				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8196-gce.h b/arch/arm64/boot/dts/mediatek/mt8196-gce.h
new file mode 100644
index 000000000000..aa909e4f4964
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8196-gce.h
@@ -0,0 +1,612 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (c) 2025 MediaTek Inc.
+ *
+ */
+
+#ifndef __DTS_GCE_MT8196_H
+#define __DTS_GCE_MT8196_H
+
+/* GCE Thread Priority
+ * The GCE core has multiple GCE threads, each of which can independently
+ * execute its own sequence of instructions.
+ * However, the GCE threads on the same core cannot run in parallel.
+ * Different GCE threads can determine thread priority based on the scenario,
+ * thereby serving different user needs.
+ *
+ * Low priority thread is executed when no high priority thread is active.
+ * Same priority thread is scheduled by round robin.
+ */
+#define CMDQ_THR_PRIO_LOWEST	0
+#define CMDQ_THR_PRIO_1		1
+#define CMDQ_THR_PRIO_2		2
+#define CMDQ_THR_PRIO_3		3
+#define CMDQ_THR_PRIO_4		4
+#define CMDQ_THR_PRIO_5		5
+#define CMDQ_THR_PRIO_6		6
+#define CMDQ_THR_PRIO_HIGHEST	7
+
+/*
+ * GCE0 Hardware Event IDs
+ * Different SoCs will have varying numbers of hardware event signals,
+ * which are sent from the corresponding hardware to the GCE.
+ * Each hardware event signal corresponds to an event ID in the GCE.
+ * The CMDQ driver can use the following event ID definitions to allow
+ * the client driver to use wait and clear APIs provided by CMDQ, enabling
+ * the GCE to execute operations in the instructions for that event ID.
+ *
+ * The event IDs of GCE0 are mainly used by display hardware.
+ */
+/* CMDQ_EVENT_DISP0_STREAM_SOF0 ~ 15: 0 ~ 15 */
+#define CMDQ_EVENT_DISP0_STREAM_SOF(n)						(0 + (n))
+/* CMDQ_EVENT_DISP0_FRAME_DONE_SEL0 ~ 15: 16 ~ 31 */
+#define CMDQ_EVENT_DISP0_FRAME_DONE_SEL(n)					(16 + (n))
+#define CMDQ_EVENT_DISP0_DISP_WDMA0_TARGET_LINE_END_ENG_EVENT			32
+#define CMDQ_EVENT_DISP0_DISP_WDMA0_SW_RST_DONE_ENG_EVENT			33
+#define CMDQ_EVENT_DISP0_DISP_POSTMASK1_RST_DONE_ENG_EVENT			34
+#define CMDQ_EVENT_DISP0_DISP_POSTMASK0_RST_DONE_ENG_EVENT			35
+#define CMDQ_EVENT_DISP0_DISP_MUTEX0_TIMEOUT_ENG_EVENT				36
+/* CMDQ_EVENT_DISP0_DISP_MUTEX0_REG_UPDATE_ENG_EVENT0 ~ 15: 37 ~ 52 */
+#define CMDQ_EVENT_DISP0_DISP_MUTEX0_REG_UPDATE_ENG_EVENT(n)			(37 + (n))
+#define CMDQ_EVENT_DISP0_DISP_MUTEX0_GET_RELEASE_ENG_EVENT			53
+#define CMDQ_EVENT_DISP0_DISP_MDP_RDMA0_SW_RST_DONE_ENG_EVENT			54
+/* CMDQ_EVENT_DISP1_STREAM_SOF0 ~ 15: 55 ~ 70 */
+#define CMDQ_EVENT_DISP1_STREAM_SOF(n)						(55 + (n))
+/* CMDQ_EVENT_DISP1_FRAME_DONE_SEL0 ~ 15: 71 ~ 86 */
+#define CMDQ_EVENT_DISP1_FRAME_DONE_SEL(n)					(71 + (n))
+/* CMDQ_EVENT_DISP1_STREAM_DONE_ENG_EVENT0 ~ 15: 87 ~ 102 */
+#define CMDQ_EVENT_DISP1_STREAM_DONE_ENG_EVENT(n)				(87 + (n))
+/* CMDQ_EVENT_DISP1_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 103 ~ 118 */
+#define CMDQ_EVENT_DISP1_REG_UPDATE_DONE_ENG_EVENT(n)				(103 + (n))
+#define CMDQ_EVENT_DISP1_OCIP_SUBSYS_SRAM_ISOINT_ENG_EVENT			119
+#define CMDQ_EVENT_DISP1_DISP_WDMA4_TARGET_LINE_END_ENG_EVENT			120
+#define CMDQ_EVENT_DISP1_DISP_WDMA4_SW_RST_DONE_ENG_EVENT			121
+#define CMDQ_EVENT_DISP1_DISP_WDMA3_TARGET_LINE_END_ENG_EVENT			122
+#define CMDQ_EVENT_DISP1_DISP_WDMA3_SW_RST_DONE_ENG_EVENT			123
+#define CMDQ_EVENT_DISP1_DISP_WDMA2_TARGET_LINE_END_ENG_EVENT			124
+#define CMDQ_EVENT_DISP1_DISP_WDMA2_SW_RST_DONE_ENG_EVENT			125
+#define CMDQ_EVENT_DISP1_DISP_WDMA1_TARGET_LINE_END_ENG_EVENT			126
+#define CMDQ_EVENT_DISP1_DISP_WDMA1_SW_RST_DONE_ENG_EVENT			127
+#define CMDQ_EVENT_DISP1_DISP_MUTEX0_TIMEOUT_ENG_EVENT				128
+#define CMDQ_EVENT_DISP1_DISP_MUTEX0_GET_RLZ_ENG_EVENT				129
+#define CMDQ_EVENT_DISP1_DISP_MDP_RDMA1_SW_RST_DONE_ENG_EVENT			130
+#define CMDQ_EVENT_DISP1_DISP_GDMA0_SW_RST_DONE_ENG_EVENT			131
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VSYNC_START_ENG_EVENT		132
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VSYNC_END_ENG_EVENT		133
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VRR_VFP_LAST_SAFE_BLANK_ENG_EVENT	134
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VFP_START_ENG_EVENT		135
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VFP_LAST_LINE_ENG_EVENT		136
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VDE_END_ENG_EVENT			137
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_TRIGGER_LOOP_CLR_ENG_EVENT	138
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_TARGET_LINE1_ENG_EVENT		139
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_TARGET_LINE0_ENG_EVENT		140
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VSYNC_START_ENG_EVENT		141
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VSYNC_END_ENG_EVENT		142
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VDE_START_ENG_EVENT		143
+#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VDE_END_ENG_EVENT			144
+/* CMDQ_EVENT_DISP1_DISP_DSI2_ENG_EVENT0 ~ 10: 145 ~ 155 */
+#define CMDQ_EVENT_DISP1_DISP_DSI2_ENG_EVENT(n)					(145 + (n))
+/* CMDQ_EVENT_DISP1_DISP_DSI1_ENG_EVENT0 ~ 21: 156 ~ 177 */
+#define CMDQ_EVENT_DISP1_DISP_DSI1_ENG_EVENT(n)					(156 + (n))
+/* CMDQ_EVENT_DISP1_DISP_DSI0_ENG_EVENT0 ~ 10: 178 ~ 188 */
+#define CMDQ_EVENT_DISP1_DISP_DSI0_ENG_EVENT(n)					(178 + (n))
+#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VSYNC_START_ENG_EVENT			189
+#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VSYNC_END_ENG_EVENT			190
+#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VDE_START_ENG_EVENT			191
+#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VDE_END_ENG_EVENT			192
+#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_TARGET_LINE_ENG_EVENT			193
+#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VSYNC_START_ENG_EVENT			194
+#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VSYNC_END_ENG_EVENT			195
+#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VDE_START_ENG_EVENT			196
+#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VDE_END_ENG_EVENT			197
+#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_TARGET_LINE_ENG_EVENT			198
+/* CMDQ_EVENT_DISP1_BUF_UNDERRUN_ENG_EVENT0 ~ 10: 199 ~ 209 */
+#define CMDQ_EVENT_DISP1_BUF_UNDERRUN_ENG_EVENT(n)				(199 + (n))
+/* CMDQ_EVENT_MML0_STREAM_SOF0 ~ 15: 210 ~ 225 */
+#define CMDQ_EVENT_MML0_STREAM_SOF(n)						(210 + (n))
+/* CMDQ_EVENT_MML0_FRAME_DONE_SEL0 ~ 15: 226 ~ 241 */
+#define CMDQ_EVENT_MML0_FRAME_DONE_SEL(n)					(226 + (n))
+/* CMDQ_EVENT_MML0_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 242 ~ 257 */
+#define CMDQ_EVENT_MML0_REG_UPDATE_DONE_ENG_EVENT(n)				(242 + (n))
+#define CMDQ_EVENT_MML0_MDP_WROT2_SW_RST_DONE_ENG_EVENT				258
+#define CMDQ_EVENT_MML0_MDP_WROT1_SW_RST_DONE_ENG_EVENT				259
+#define CMDQ_EVENT_MML0_MDP_WROT0_SW_RST_DONE_ENG_EVENT				260
+#define CMDQ_EVENT_MML0_MDP_RROT0_SW_RST_DONE_ENG_EVENT				261
+#define CMDQ_EVENT_MML0_MDP_RDMA2_SW_RST_DONE_ENG_EVENT				262
+#define CMDQ_EVENT_MML0_MDP_RDMA1_SW_RST_DONE_ENG_EVENT				263
+#define CMDQ_EVENT_MML0_MDP_RDMA0_SW_RST_DONE_ENG_EVENT				264
+#define CMDQ_EVENT_MML0_MDP_MERGE0_SW_RST_DONE_ENG_EVENT			265
+#define CMDQ_EVENT_MML0_DISP_MUTEX0_TIMEOUT_ENG_EVENT				266
+#define CMDQ_EVENT_MML0_DISP_MUTEX0_GET_RLZ_ENG_EVENT				267
+/* CMDQ_EVENT_MML1_STREAM_SOF0 ~ 15: 268 ~ 283 */
+#define CMDQ_EVENT_MML1_STREAM_SOF(n)						(268 + (n))
+/* CMDQ_EVENT_MML1_FRAME_DONE_SEL0 ~ 15: 284 ~ 299 */
+#define CMDQ_EVENT_MML1_FRAME_DONE_SEL(n)					(284 + (n))
+/* CMDQ_EVENT_MML1_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 300 ~ 315 */
+#define CMDQ_EVENT_MML1_REG_UPDATE_DONE_ENG_EVENT(n)				(300 + (n))
+#define CMDQ_EVENT_MML1_MDP_WROT2_SW_RST_DONE_ENG_EVENT				316
+#define CMDQ_EVENT_MML1_MDP_WROT1_SW_RST_DONE_ENG_EVENT				317
+#define CMDQ_EVENT_MML1_MDP_WROT0_SW_RST_DONE_ENG_EVENT				318
+#define CMDQ_EVENT_MML1_MDP_RROT0_SW_RST_DONE_ENG_EVENT				319
+#define CMDQ_EVENT_MML1_MDP_RDMA2_SW_RST_DONE_ENG_EVENT				320
+#define CMDQ_EVENT_MML1_MDP_RDMA1_SW_RST_DONE_ENG_EVENT				321
+#define CMDQ_EVENT_MML1_MDP_RDMA0_SW_RST_DONE_ENG_EVENT				322
+#define CMDQ_EVENT_MML1_MDP_MERGE0_SW_RST_DONE_ENG_EVENT			323
+#define CMDQ_EVENT_MML1_DISP_MUTEX0_TIMEOUT_ENG_EVENT				324
+#define CMDQ_EVENT_MML1_DISP_MUTEX0_GET_RLZ_ENG_EVENT				325
+/* CMDQ_EVENT_OVL0_STREAM_SOF0 ~ 15: 326 ~ 341 */
+#define CMDQ_EVENT_OVL0_STREAM_SOF(n)						(326 + (n))
+/* CMDQ_EVENT_OVL0_FRAME_DONE_SEL0 ~ 15: 342 ~ 357 */
+#define CMDQ_EVENT_OVL0_FRAME_DONE_SEL(n)					(342 + (n))
+#define CMDQ_EVENT_OVL0_OVL_UFBC_WDMA0_TARGET_LINE_END_ENG_EVENT		358
+#define CMDQ_EVENT_OVL0_OVL_MUTEX0_TIMEOUT_ENG_EVENT				359
+/* CMDQ_EVENT_OVL0_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 360 ~ 375 */
+#define CMDQ_EVENT_OVL0_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT(n)			(360 + (n))
+#define CMDQ_EVENT_OVL0_OVL_MUTEX0_GET_RELEASE_ENG_EVENT			376
+#define CMDQ_EVENT_OVL0_OVL_MDP_RDMA1_SW_RST_DONE_ENG_EVENT			377
+#define CMDQ_EVENT_OVL0_OVL_MDP_RDMA0_SW_RST_DONE_ENG_EVENT			378
+#define CMDQ_EVENT_OVL0_OVL_EXDMA9_FRAME_RESET_DONE_ENG_EVENT			379
+#define CMDQ_EVENT_OVL0_OVL_EXDMA8_FRAME_RESET_DONE_ENG_EVENT			380
+#define CMDQ_EVENT_OVL0_OVL_EXDMA7_FRAME_RESET_DONE_ENG_EVENT			381
+#define CMDQ_EVENT_OVL0_OVL_EXDMA6_FRAME_RESET_DONE_ENG_EVENT			382
+#define CMDQ_EVENT_OVL0_OVL_EXDMA5_FRAME_RESET_DONE_ENG_EVENT			383
+#define CMDQ_EVENT_OVL0_OVL_EXDMA4_FRAME_RESET_DONE_ENG_EVENT			384
+#define CMDQ_EVENT_OVL0_OVL_EXDMA3_FRAME_RESET_DONE_ENG_EVENT			385
+#define CMDQ_EVENT_OVL0_OVL_EXDMA2_FRAME_RESET_DONE_ENG_EVENT			386
+#define CMDQ_EVENT_OVL0_OVL_EXDMA1_FRAME_RESET_DONE_ENG_EVENT			387
+#define CMDQ_EVENT_OVL0_OVL_EXDMA0_FRAME_RESET_DONE_ENG_EVENT			388
+#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA1_TARGET_LINE_END_ENG_EVENT		389
+#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA1_SW_RST_DONE_END_ENG_EVENT		390
+#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA0_TARGET_LINE_END_ENG_EVENT		391
+#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA0_SW_RST_DONE_END_ENG_EVENT		392
+#define CMDQ_EVENT_OVL0_OVL_BWM0_FRAME_RESET_DONE_ENG_EVENT			393
+/* CMDQ_EVENT_OVL1_STREAM_SOF0 ~ 15: 394 ~ 409 */
+#define CMDQ_EVENT_OVL1_STREAM_SOF(n)						(394 + (n))
+/* CMDQ_EVENT_OVL1_FRAME_DONE_SEL0 ~ 15: 410 ~ 425 */
+#define CMDQ_EVENT_OVL1_FRAME_DONE_SEL(n)					(410 + (n))
+#define CMDQ_EVENT_OVL1_OVL_UFBC_WDMA0_TARGET_LINE_END_ENG_EVENT		426
+#define CMDQ_EVENT_OVL1_OVL_MUTEX0_TIMEOUT_ENG_EVENT				427
+/* CMDQ_EVENT_OVL1_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 428 ~ 443 */
+#define CMDQ_EVENT_OVL1_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT(n)			(428 + (n))
+#define CMDQ_EVENT_OVL1_OVL_MUTEX0_GET_RELEASE_ENG_EVENT			444
+#define CMDQ_EVENT_OVL1_OVL_MDP_RDMA1_SW_RST_DONE_ENG_EVENT			445
+#define CMDQ_EVENT_OVL1_OVL_MDP_RDMA0_SW_RST_DONE_ENG_EVENT			446
+#define CMDQ_EVENT_OVL1_OVL_EXDMA9_FRAME_RESET_DONE_ENG_EVENT			447
+#define CMDQ_EVENT_OVL1_OVL_EXDMA8_FRAME_RESET_DONE_ENG_EVENT			448
+#define CMDQ_EVENT_OVL1_OVL_EXDMA7_FRAME_RESET_DONE_ENG_EVENT			449
+#define CMDQ_EVENT_OVL1_OVL_EXDMA6_FRAME_RESET_DONE_ENG_EVENT			450
+#define CMDQ_EVENT_OVL1_OVL_EXDMA5_FRAME_RESET_DONE_ENG_EVENT			451
+#define CMDQ_EVENT_OVL1_OVL_EXDMA4_FRAME_RESET_DONE_ENG_EVENT			452
+#define CMDQ_EVENT_OVL1_OVL_EXDMA3_FRAME_RESET_DONE_ENG_EVENT			453
+#define CMDQ_EVENT_OVL1_OVL_EXDMA2_FRAME_RESET_DONE_ENG_EVENT			454
+#define CMDQ_EVENT_OVL1_OVL_EXDMA1_FRAME_RESET_DONE_ENG_EVENT			455
+#define CMDQ_EVENT_OVL1_OVL_EXDMA0_FRAME_RESET_DONE_ENG_EVENT			456
+#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA1_TARGET_LINE_END_ENG_EVENT		457
+#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA1_SW_RST_DONE_END_ENG_EVENT		458
+#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA0_TARGET_LINE_END_ENG_EVENT		459
+#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA0_SW_RST_DONE_END_ENG_EVENT		460
+#define CMDQ_EVENT_OVL1_OVL_BWM0_FRAME_RESET_DONE_ENG_EVENT			461
+#define CMDQ_EVENT_DPC_DT_DONE0							462
+#define CMDQ_EVENT_DPC_DT_DONE1							463
+#define CMDQ_EVENT_DPC_DT_DONE2_0_MERGE						464
+#define CMDQ_EVENT_DPC_DT_DONE2_1_MERGE						465
+#define CMDQ_EVENT_DPC_DT_DONE2_2_MERGE						466
+#define CMDQ_EVENT_DPC_DT_DONE2_3_MERGE						467
+#define CMDQ_EVENT_DPC_DT_DONE3							468
+#define CMDQ_EVENT_DPC_DT_DONE4_MERGE						469
+#define CMDQ_EVENT_DPC_DT_DONE5							470
+#define CMDQ_EVENT_DPC_DT_DONE6_0_MERGE						471
+#define CMDQ_EVENT_DPC_DT_DONE6_1_MERGE						472
+#define CMDQ_EVENT_DPC_DT_DONE6_2_MERGE						473
+#define CMDQ_EVENT_DPC_DT_DONE6_3_MERGE						474
+#define CMDQ_EVENT_DPC_DT_DONE7							475
+#define CMDQ_EVENT_DPC_DT_DONE32_MERGE						476
+#define CMDQ_EVENT_DPC_DT_DONE33						477
+#define CMDQ_EVENT_DPC_DT_DONE34_0						478
+#define CMDQ_EVENT_DPC_DT_DONE35						479
+#define CMDQ_EVENT_DPC_DISP_SSYS_DT_ERR_ON_BEFORE_OFF				480
+#define CMDQ_EVENT_DPC_DISP_SSYS_DT_ERR_PRETE_BEFORE_ON				481
+#define CMDQ_EVENT_DPC_DISP_DVFS_DT_ERR_ON_BEFORE_OFF				482
+#define CMDQ_EVENT_DPC_DISP_DVFS_DT_ERR_PRETE_BEFORE_ON				483
+#define CMDQ_EVENT_DPC_DISP_SB_DT_ERR_ON_BEFORE_OFF				484
+#define CMDQ_EVENT_DPC_DISP_SB_DT_ERR_PRETE_BEFORE_ON				485
+#define CMDQ_EVENT_DPC_DISP_SW_CONFIG_WHEN_MTCMOS_OFF				486
+#define CMDQ_EVENT_DPC_MML_SSYS_DT_ERR_ON_BEFORE_OFF				487
+#define CMDQ_EVENT_DPC_MML_SSYS_DT_ERR_PRETE_BEFORE_ON				488
+#define CMDQ_EVENT_DPC_MML_DVFS_DT_ERR_ON_BEFORE_OFF				489
+#define CMDQ_EVENT_DPC_MML_DVFS_DT_ERR_PRETE_BEFORE_ON				490
+#define CMDQ_EVENT_DPC_MML_SB_DT_ERR_ON_BEFORE_OFF				491
+#define CMDQ_EVENT_DPC_MML_SB_DT_ERR_PRETE_BEFORE_ON				492
+#define CMDQ_EVENT_DPC_MML_SW_CONFIG_WHEN_MTCMOS_OFF				493
+/* CMDQ_EVENT_DPTX_DPTX_EVENT0 ~ 3: 494 ~ 497 */
+#define CMDQ_EVENT_DPTX_DPTX_EVENT(n)						(494 + (n))
+/* CMDQ_EVENT_EDPTX_EDPTX_EVENT0 ~ 1: 498 ~ 499 */
+#define CMDQ_EVENT_EDPTX_EDPTX_EVENT(n)						(498 + (n))
+
+#define CMDQ_EVENT_DSI0_TE_I_DSI0_TE_I						898
+#define CMDQ_EVENT_DSI1_TE_I_DSI1_TE_I						899
+#define CMDQ_EVENT_DSI2_TE_I_DSI2_TE_I						900
+/* CMDQ_EVENT_POWEREVENT_GCE_EVENT_SUBSYS_PWR_ACK0 ~ 23: 901 ~ 924 */
+#define CMDQ_EVENT_POWEREVENT_GCE_EVENT_SUBSYS_PWR_ACK(n)			(901 + (n))
+/* CMDQ_EVENT_GCE_EVENT_DPTX_GCE_EVENT_DPTX0 ~ 1: 925 ~ 926 */
+#define CMDQ_EVENT_GCE_EVENT_DPTX_GCE_EVENT_DPTX(n)				(925 + (n))
+/* CMDQ_EVENT_GCE_EVENT_DPTX_P1_GCE_EVENT_DPTX_P10 ~ 1: 927 ~ 928 */
+#define CMDQ_EVENT_GCE_EVENT_DPTX_P1_GCE_EVENT_DPTX_P1(n)			(927 + (n))
+/* CMDQ_EVENT_GCE_EVENT_EDPTX_GCE_EVENT_EDPTX0 ~ 1: 929 ~ 930 */
+#define CMDQ_EVENT_GCE_EVENT_EDPTX_GCE_EVENT_EDPTX(n)				(929 + (n))
+#define CMDQ_EVENT_DSI3_TE_I_DSI3_TE_I						931
+#define CMDQ_EVENT_SPI0_FINISH_EVENT_DSI4_TE_I					932
+#define CMDQ_EVENT_SPI0_EVENT_EVENT_DSI5_TE_I					933
+
+/*
+ * GCE1 Hardware Event IDs
+ * Different SoCs will have varying numbers of hardware event signals,
+ * which are sent from the corresponding hardware to the GCE.
+ * Each hardware event signal corresponds to an event ID in the GCE.
+ * The CMDQ driver can use the following event ID definitions to allow
+ * the client driver to use wait and clear APIs provided by CMDQ, enabling
+ * the GCE to execute operations in the instructions for that event ID.
+ *
+ * The event IDs of GCE1 are mainly used by non-display hardware.
+ */
+#define CMDQ_EVENT_VENC3_VENC_RESERVED						0
+#define CMDQ_EVENT_VENC3_VENC_FRAME_DONE					1
+#define CMDQ_EVENT_VENC3_VENC_PAUSE_DONE					2
+#define CMDQ_EVENT_VENC3_JPGENC_DONE						3
+#define CMDQ_EVENT_VENC3_VENC_MB_DONE						4
+#define CMDQ_EVENT_VENC3_VENC_128BYTE_DONE					5
+#define CMDQ_EVENT_VENC3_JPGDEC_DONE						6
+#define CMDQ_EVENT_VENC3_JPGDEC_C1_DONE						7
+#define CMDQ_EVENT_VENC3_JPGDEC_INSUFF_DONE					8
+#define CMDQ_EVENT_VENC3_JPGDEC_C1_INSUFF_DONE					9
+#define CMDQ_EVENT_VENC3_WP_2ND_STAGE_DONE					10
+#define CMDQ_EVENT_VENC3_WP_3RD_STAGE_DONE					11
+#define CMDQ_EVENT_VENC3_PPS_HEADER_DONE					12
+#define CMDQ_EVENT_VENC3_SPS_HEADER_DONE					13
+#define CMDQ_EVENT_VENC3_VPS_HEADER_DONE					14
+#define CMDQ_EVENT_VENC3_VENC_SLICE_DONE					15
+#define CMDQ_EVENT_VENC3_VENC_SOC_SLICE_DONE					16
+#define CMDQ_EVENT_VENC3_VENC_SOC_FRAME_DONE					17
+
+#define CMDQ_EVENT_VENC2_VENC_FRAME_DONE					33
+#define CMDQ_EVENT_VENC2_VENC_PAUSE_DONE					34
+#define CMDQ_EVENT_VENC2_JPGENC_DONE						35
+#define CMDQ_EVENT_VENC2_VENC_MB_DONE						36
+#define CMDQ_EVENT_VENC2_VENC_128BYTE_DONE					37
+#define CMDQ_EVENT_VENC2_JPGDEC_DONE						38
+#define CMDQ_EVENT_VENC2_JPGDEC_C1_DONE						39
+#define CMDQ_EVENT_VENC2_JPGDEC_INSUFF_DONE					40
+#define CMDQ_EVENT_VENC2_JPGDEC_C1_INSUFF_DONE					41
+#define CMDQ_EVENT_VENC2_WP_2ND_STAGE_DONE					42
+#define CMDQ_EVENT_VENC2_WP_3RD_STAGE_DONE					43
+#define CMDQ_EVENT_VENC2_PPS_HEADER_DONE					44
+#define CMDQ_EVENT_VENC2_SPS_HEADER_DONE					45
+#define CMDQ_EVENT_VENC2_VPS_HEADER_DONE					46
+#define CMDQ_EVENT_VENC2_VENC_SLICE_DONE					47
+#define CMDQ_EVENT_VENC2_VENC_SOC_SLICE_DONE					48
+#define CMDQ_EVENT_VENC2_VENC_SOC_FRAME_DONE					49
+
+#define CMDQ_EVENT_VENC1_VENC_FRAME_DONE					65
+#define CMDQ_EVENT_VENC1_VENC_PAUSE_DONE					66
+#define CMDQ_EVENT_VENC1_JPGENC_DONE						67
+#define CMDQ_EVENT_VENC1_VENC_MB_DONE						68
+#define CMDQ_EVENT_VENC1_VENC_128BYTE_DONE					69
+#define CMDQ_EVENT_VENC1_JPGDEC_DONE						70
+#define CMDQ_EVENT_VENC1_JPGDEC_C1_DONE						71
+#define CMDQ_EVENT_VENC1_JPGDEC_INSUFF_DONE					72
+#define CMDQ_EVENT_VENC1_JPGDEC_C1_INSUFF_DONE					73
+#define CMDQ_EVENT_VENC1_WP_2ND_STAGE_DONE					74
+#define CMDQ_EVENT_VENC1_WP_3RD_STAGE_DONE					75
+#define CMDQ_EVENT_VENC1_PPS_HEADER_DONE					76
+#define CMDQ_EVENT_VENC1_SPS_HEADER_DONE					77
+#define CMDQ_EVENT_VENC1_VPS_HEADER_DONE					78
+#define CMDQ_EVENT_VENC1_VENC_SLICE_DONE					79
+#define CMDQ_EVENT_VENC1_VENC_SOC_SLICE_DONE					80
+#define CMDQ_EVENT_VENC1_VENC_SOC_FRAME_DONE					81
+
+#define CMDQ_EVENT_VDEC1_VDEC_LINE_CNT_INT					192
+#define CMDQ_EVENT_VDEC1_VDEC_INT						193
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_2						194
+#define CMDQ_EVENT_VDEC1_VDEC_DEC_ERR						195
+#define CMDQ_EVENT_VDEC1_VDEC_BUSY_OVERFLOW					196
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_5						197
+#define CMDQ_EVENT_VDEC1_VDEC_INI_FETCH_RDY					198
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_7						199
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_8						200
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_9						201
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_10						202
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_11						203
+
+#define CMDQ_EVENT_VDEC1_VDEC_GCE_CNT_OP_THR					207
+
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_32						224
+#define CMDQ_EVENT_VDEC1_VDEC_LAT_INT						225
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_34						226
+#define CMDQ_EVENT_VDEC1_VDEC_LAT_DEC_ERR					227
+#define CMDQ_EVENT_VDEC1_VDEC_LAT_BUSY_OVERFLOW					228
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_37						229
+#define CMDQ_EVENT_VDEC1_VDEC_LAT_INI_FETCH_RDY					230
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_39						231
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_40						232
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_41						233
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_42						234
+#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_43						235
+
+#define CMDQ_EVENT_VDEC1_VDEC_LAT_GCE_CNT_OP_THR				239
+
+#define CMDQ_EVENT_IMG_IMG_EVENT_0						256
+/* CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_TRAW0_0 ~ 5: 257 ~  262 */
+#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_TRAW0(n)				(257 + (n))
+#define CMDQ_EVENT_IMG_TRAW0_DMA_ERR_EVENT					263
+#define CMDQ_EVENT_IMG_TRAW0_DUMMY_0						264
+/* CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_TRAW0_0 ~ 5: 265 ~ 270 */
+#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_TRAW0(n)				(265 + (n))
+#define CMDQ_EVENT_IMG_TRAW1_DMA_ERR_EVENT					271
+#define CMDQ_EVENT_IMG_ADL_TILE_DONE_EVENT					272
+#define CMDQ_EVENT_IMG_ADLWR0_TILE_DONE_EVENT					273
+#define CMDQ_EVENT_IMG_ADLWR1_TILE_DONE_EVENT					274
+#define CMDQ_EVENT_IMG_IMGSYS_IPE_ME_DONE					275
+#define CMDQ_EVENT_IMG_IMGSYS_IPE_MMG_DONE					276
+/* CMDQ_EVENT_IMG_QOF_ACK_EVENT0 ~ 19: 277 ~ 296 */
+#define CMDQ_EVENT_IMG_QOF_ACK_EVENT(n)						(277 + (n))
+/* CMDQ_EVENT_IMG_QOF_ON_EVENT0 ~ 4: 297 ~ 301 */
+#define CMDQ_EVENT_IMG_QOF_ON_EVENT(n)						(297 + (n))
+/* CMDQ_EVENT_IMG_QOF_OFF_EVENT0 ~ 4: 302 ~ 306 */
+#define CMDQ_EVENT_IMG_QOF_OFF_EVENT(n)						(302 + (n))
+/* CMDQ_EVENT_IMG_QOF_SAVE_EVENT0 ~ 4: 307 ~ 311 */
+#define CMDQ_EVENT_IMG_QOF_SAVE_EVENT(n)					(307 + (n))
+/* CMDQ_EVENT_IMG_QOF_RESTORE_EVENT0 ~ 4: 312 ~ 316 */
+#define CMDQ_EVENT_IMG_QOF_RESTORE_EVENT(n)					(312 + (n))
+/* CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_P20~5: 317 ~ 322 */
+#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_P2(n)					(317 + (n))
+#define CMDQ_EVENT_IMG_DIP_DMA_ERR_EVENT					323
+#define CMDQ_EVENT_IMG_DIP_NR_DMA_ERR_EVENT					324
+#define CMDQ_EVENT_IMG_DIP_DUMMY_0						325
+#define CMDQ_EVENT_IMG_WPE_EIS_GCE_FRAME_DONE					326
+#define CMDQ_EVENT_IMG_WPE_EIS_DONE_SYNC_OUT					327
+/* CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_P20 ~ 5: 328 ~ 333 */
+#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_P2(n)				(328 + (n))
+/* CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_P20 ~ 5: 334 ~ 339 */
+#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_P2(n)				(334 + (n))
+#define CMDQ_EVENT_IMG_PQA_DMA_ERR_EVENT					340
+/* CMDQ_EVENT_IMG_WPE0_DUMMY0~2: 341 ~ 343 */
+#define CMDQ_EVENT_IMG_WPE0_DUMMY(n)						(341 + (n))
+#define CMDQ_EVENT_IMG_OMC_TNR_GCE_FRAME_DONE					344
+#define CMDQ_EVENT_IMG_OMC_TNR_DONE_SYNC_OUT					345
+/* CMDQ_EVENT_IMG_OMC_TNR_CQ_THR_DONE_P20 ~ 5: 346 ~ 351 */
+#define CMDQ_EVENT_IMG_OMC_TNR_CQ_THR_DONE_P2(n)				(346 + (n))
+/* CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_P20 ~ 5: 352 ~ 357 */
+#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_P2(n)				(352 + (n))
+#define CMDQ_EVENT_IMG_PQB_DMA_ERR_EVENT					358
+/* CMDQ_EVENT_IMG_WPE1_DUMMY0 ~ 2: 359 ~ 361 */
+#define CMDQ_EVENT_IMG_WPE1_DUMMY(n)						(359 + (n))
+#define CMDQ_EVENT_IMG_WPE_LITE_GCE_FRAME_DONE					362
+#define CMDQ_EVENT_IMG_WPE_LITE_DONE_SYNC_OUT					363
+/* CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_P20 ~ 5: 364 ~ 369 */
+#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_P2(n)				(364 + (n))
+#define CMDQ_EVENT_IMG_OMC_LITE_GCE_FRAME_DONE					370
+#define CMDQ_EVENT_IMG_OMC_LITE_DONE_SYNC_OUT					371
+/* CMDQ_EVENT_IMG_OMC_LITE_CQ_THR_DONE_P20 ~ 5: 372 ~ 377 */
+#define CMDQ_EVENT_IMG_OMC_LITE_CQ_THR_DONE_P2(n)				(372 + (n))
+/* CMDQ_EVENT_IMG_WPE2_DUMMY0 ~ 2: 378 ~ 380 */
+#define CMDQ_EVENT_IMG_WPE2_DUMMY(n)						(378 + (n))
+#define CMDQ_EVENT_IMG_IMGSYS_IPE_FDVT0_DONE					381
+#define CMDQ_EVENT_IMG_IMG_EVENT_126						382
+#define CMDQ_EVENT_IMG_IMG_EVENT_127						383
+#define CMDQ_EVENT_CAM_CAM_EVENT_0						384
+#define CMDQ_EVENT_CAM_CAM_SUBA_SW_PASS1_DONE					385
+#define CMDQ_EVENT_CAM_CAM_SUBB_SW_PASS1_DONE					386
+#define CMDQ_EVENT_CAM_CAM_SUBC_SW_PASS1_DONE					387
+#define CMDQ_EVENT_CAM_CAM_SUBA_TFMR_PASS1_DONE					388
+#define CMDQ_EVENT_CAM_CAM_SUBB_TFMR_PASS1_DONE					389
+#define CMDQ_EVENT_CAM_CAM_SUBC_TFMR_PASS1_DONE					390
+/* CMDQ_EVENT_CAM_CAMSV_A_SW_PASS1_DONE0 ~ 3: 391 ~ 394 */
+#define CMDQ_EVENT_CAM_CAMSV_A_SW_PASS1_DONE(n)					(391 + (n))
+/* CMDQ_EVENT_CAM_CAMSV_B_SW_PASS1_DONE0 ~ 3: 395 ~ 398 */
+#define CMDQ_EVENT_CAM_CAMSV_B_SW_PASS1_DONE(n)					(395 + (n))
+/* CMDQ_EVENT_CAM_CAMSV_C_SW_PASS1_DONE0 ~ 3: 399 + 402 */
+#define CMDQ_EVENT_CAM_CAMSV_C_SW_PASS1_DONE(n)					(399 + (n))
+/* CMDQ_EVENT_CAM_CAMSV_D_SW_PASS1_DONE0 ~ 3: 403 ~ 406 */
+#define CMDQ_EVENT_CAM_CAMSV_D_SW_PASS1_DONE(n)					(403 + (n))
+/* CMDQ_EVENT_CAM_CAMSV_E_SW_PASS1_DONE0 ~ 3: 407 ~ 409 */
+#define CMDQ_EVENT_CAM_CAMSV_E_SW_PASS1_DONE(n)					(407 + (n))
+/* CMDQ_EVENT_CAM_CAMSV_F_SW_PASS1_DONE0 ~ 3: 411 ~ 413 */
+#define CMDQ_EVENT_CAM_CAMSV_F_SW_PASS1_DONE(n)					(411 + (n))
+#define CMDQ_EVENT_CAM_MRAW0_SW_PASS1_DONE					415
+#define CMDQ_EVENT_CAM_MRAW1_SW_PASS1_DONE					416
+#define CMDQ_EVENT_CAM_MRAW2_SW_PASS1_DONE					417
+#define CMDQ_EVENT_CAM_MRAW3_SW_PASS1_DONE					418
+#define CMDQ_EVENT_CAM_UISP_SW_PASS1_DONE					419
+#define CMDQ_EVENT_CAM_TG_MRAW0_OUT_SOF						420
+#define CMDQ_EVENT_CAM_TG_MRAW1_OUT_SOF						421
+#define CMDQ_EVENT_CAM_TG_MRAW2_OUT_SOF						422
+#define CMDQ_EVENT_CAM_TG_MRAW3_OUT_SOF						423
+#define CMDQ_EVENT_CAM_PDA0_IRQO_EVENT_DONE_D1					424
+#define CMDQ_EVENT_CAM_PDA1_IRQO_EVENT_DONE_D1					425
+#define CMDQ_EVENT_CAM_DPE_DVP_CMQ_EVENT					426
+#define CMDQ_EVENT_CAM_DPE_DVS_CMQ_EVENT					427
+#define CMDQ_EVENT_CAM_DPE_DVFG_CMQ_EVENT					428
+#define CMDQ_EVENT_CAM_CAM_EVENT_45						429
+#define CMDQ_EVENT_CAM_CAM_EVENT_46						430
+#define CMDQ_EVENT_CAM_CAM_EVENT_47						431
+#define CMDQ_EVENT_CAM_CAM_EVENT_48						432
+/* CMDQ_EVENT_CAM_CAM_SUBA_TG_INT1 ~ 4: 433 ~ 436 */
+#define CMDQ_EVENT_CAM_CAM_SUBA_TG_INT(n)					(433 + (n) - 1)
+/* CMDQ_EVENT_CAM_CAM_SUBB_TG_INT1 ~ 4: 437 ~ 440 */
+#define CMDQ_EVENT_CAM_CAM_SUBB_TG_INT(n)					(437 + (n) - 1)
+/* CMDQ_EVENT_CAM_CAM_SUBC_TG_INT1 ~ 4: 441 ~ 444 */
+#define CMDQ_EVENT_CAM_CAM_SUBC_TG_INT(n)					(441 + (n) - 1)
+#define CMDQ_EVENT_CAM_RAW_O_SOF_SUBA						445
+#define CMDQ_EVENT_CAM_RAW_O_SOF_SUBB						446
+#define CMDQ_EVENT_CAM_RAW_O_SOF_SUBC						447
+#define CMDQ_EVENT_CAM_TFMR_RAW_O_SOF_SUBA					448
+#define CMDQ_EVENT_CAM_TFMR_RAW_O_SOF_SUBB					449
+#define CMDQ_EVENT_CAM_TFMR_RAW_O_SOF_SUBC					450
+#define CMDQ_EVENT_CAM_RAW_SEL_SOF_UISP						451
+#define CMDQ_EVENT_CAM_CAM_SUBA_RING_BUFFER_OVERFLOW_INT_IN			452
+#define CMDQ_EVENT_CAM_CAM_SUBB_RING_BUFFER_OVERFLOW_INT_IN			453
+#define CMDQ_EVENT_CAM_CAM_SUBC_RING_BUFFER_OVERFLOW_INT_IN			454
+#define CMDQ_EVENT_CAM_CAM_EVENT_71						455
+#define CMDQ_EVENT_CAM_ADL_WR_FRAME_DONE					456
+#define CMDQ_EVENT_CAM_ADL_RD_FRAME_DONE					457
+#define CMDQ_EVENT_CAM_QOF_RAWA_POWER_ON_EVENT					458
+#define CMDQ_EVENT_CAM_QOF_RAWB_POWER_ON_EVENT					459
+#define CMDQ_EVENT_CAM_QOF_RAWC_POWER_ON_EVENT					460
+#define CMDQ_EVENT_CAM_QOF_RAWA_POWER_OFF_EVENT					461
+#define CMDQ_EVENT_CAM_QOF_RAWB_POWER_OFF_EVENT					462
+#define CMDQ_EVENT_CAM_QOF_RAWC_POWER_OFF_EVENT					463
+#define CMDQ_EVENT_CAM_QOF_RAWA_SAVE_EVENT					464
+#define CMDQ_EVENT_CAM_QOF_RAWB_SAVE_EVENT					465
+#define CMDQ_EVENT_CAM_QOF_RAWC_SAVE_EVENT					466
+#define CMDQ_EVENT_CAM_QOF_RAWA_RESTORE_EVENT					467
+#define CMDQ_EVENT_CAM_QOF_RAWB_RESTORE_EVENT					468
+#define CMDQ_EVENT_CAM_QOF_RAWC_RESTORE_EVENT					469
+/* CMDQ_EVENT_CAM_QOF_CAM_EVENT0 ~ 11: 470 ~ 481 */
+#define CMDQ_EVENT_CAM_QOF_CAM_EVENT(n)						(470 + (n))
+/* CMDQ_EVENT_CAM_SENINF_CFG_DONE_EVENT0 ~ 11: 482 ~ 495 */
+#define CMDQ_EVENT_CAM_SENINF_CFG_DONE_EVENT(n)					(482 + (n))
+#define CMDQ_EVENT_CAM_CCU0_TO_GCE_NON_SEC_IRQ					496
+#define CMDQ_EVENT_CAM_CCU0_TO_GCE_SEC_IRQ					497
+#define CMDQ_EVENT_CAM_CCU0_TO_GCE_VM_IRQ					498
+#define CMDQ_EVENT_CAM_CCU0_TO_GCE_EXCH_VM_IRQ					499
+#define CMDQ_EVENT_CAM_CCU1_TO_GCE_NON_SEC_IRQ					500
+#define CMDQ_EVENT_CAM_CCU1_TO_GCE_SEC_IRQ					501
+#define CMDQ_EVENT_CAM_CCU1_TO_GCE_VM_IRQ					502
+#define CMDQ_EVENT_CAM_CCU1_TO_GCE_EXCH_VM_IRQ					503
+/* CMDQ_EVENT_CAM_I2C_CH2_EVENT0 ~ 4: 504 ~ 509 */
+#define CMDQ_EVENT_CAM_I2C_CH2_EVENT(n)						(504 + (n))
+#define CMDQ_EVENT_CAM_CAM_EVENT_125						509
+#define CMDQ_EVENT_CAM_CAM_EVENT_126						510
+#define CMDQ_EVENT_CAM_CAM_EVENT_127						511
+
+#define CMDQ_EVENT_SMI_EVENT_MMINFRA_SMI_MMSRAM_COMM_SMIASSER			898
+#define CMDQ_EVENT_SMI_EVENT_MMINFRA_SMI_MDP_COMM_SMIASSER			899
+#define CMDQ_EVENT_SMI_EVENT_MMINFRA_SMI_DISP_COMM_SMIASSER			900
+
+/*
+ * GCE Software Tokens
+ * Apart from the event IDs that are already bound to hardware event signals,
+ * the remaining event IDs can be used as software tokens.
+ * This allows the client driver to name and operate them independently,
+ * and their usage is the same as that of hardware events.
+ */
+/* Begin of GCE0 software token */
+/* Config thread notify trigger thread */
+#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY			640
+/* Trigger thread notify config thread */
+#define CMDQ_SYNC_TOKEN_STREAM_EOF			641
+/* Block Trigger thread until the ESD check finishes */
+#define CMDQ_SYNC_TOKEN_ESD_EOF				642
+#define CMDQ_SYNC_TOKEN_STREAM_BLOCK			643
+/* Check CABC setup finish */
+#define CMDQ_SYNC_TOKEN_CABC_EOF			644
+/* VFP period token for Msync */
+#define CMDQ_SYNC_TOKEN_VFP_PERIOD			645
+/* Software sync token for dual display */
+#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY_1			694
+#define CMDQ_SYNC_TOKEN_STREAM_EOF_1			695
+#define CMDQ_SYNC_TOKEN_ESD_EOF_1			696
+#define CMDQ_SYNC_TOKEN_STREAM_BLOCK_1			697
+#define CMDQ_SYNC_TOKEN_CABC_EOF_1			698
+
+/*
+ * GPR access tokens (for HW register backup)
+ * There are 15 32-bit GPR, form 3 GPR as a set
+ * (64-bit for address, 32-bit for value)
+ *
+ * CMDQ_SYNC_TOKEN_GPR_SET0 ~ 4: 700 ~ 704
+ */
+#define CMDQ_SYNC_TOKEN_GPR_SET(n)			(700 + (n))
+#define CMDQ_SYNC_TOKEN_TE_0				705
+#define CMDQ_SYNC_TOKEN_PREFETCH_TE_0			706
+#define CMDQ_SYNC_TOKEN_VIDLE_POWER_ON			707
+#define CMDQ_SYNC_TOKEN_CHECK_TRIGGER_MERGE		708
+
+/* Resource lock event to control resource in GCE thread */
+#define CMDQ_SYNC_RESOURCE_WROT0			710
+#define CMDQ_SYNC_RESOURCE_WROT1			711
+/* Hardware TRACE software token */
+#define CMDQ_SYNC_TOKEN_HW_TRACE_WAIT			712
+#define CMDQ_SYNC_TOKEN_HW_TRACE_LOCK			713
+/* Software sync token for dual display */
+#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY_3			714
+#define CMDQ_SYNC_TOKEN_STREAM_EOF_3			715
+#define CMDQ_SYNC_TOKEN_ESD_EOF_3			716
+#define CMDQ_SYNC_TOKEN_STREAM_BLOCK_3			717
+#define CMDQ_SYNC_TOKEN_CABC_EOF_3			718
+/* End of GCE0 software token */
+
+/* Begin of GCE1 software token */
+/* CMDQ_SYNC_TOKEN_IMGSYS_POOL0 ~ 300: 512 ~ 812 */
+#define	CMDQ_SYNC_TOKEN_IMGSYS_POOL(n)			(512 + (n))
+/* ISP software token */
+#define CMDQ_SYNC_TOKEN_IMGSYS_WPE_EIS			813
+#define CMDQ_SYNC_TOKEN_IMGSYS_OMC_TNR			814
+#define CMDQ_SYNC_TOKEN_IMGSYS_WPE_LITE			815
+#define CMDQ_SYNC_TOKEN_IMGSYS_TRAW			816
+#define CMDQ_SYNC_TOKEN_IMGSYS_LTRAW			817
+#define CMDQ_SYNC_TOKEN_IMGSYS_XTRAW			818
+#define CMDQ_SYNC_TOKEN_IMGSYS_DIP			819
+#define CMDQ_SYNC_TOKEN_IMGSYS_PQDIP_A			820
+#define CMDQ_SYNC_TOKEN_IMGSYS_PQDIP_B			821
+#define CMDQ_SYNC_TOKEN_IPESYS_ME			822
+#define CMDQ_SYNC_TOKEN_APUSYS_APU			823
+#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_TRAW			824
+#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_LTRAW		825
+#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_XTRAW		826
+#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_DIP			827
+#define CMDQ_SYNC_TOKEN_IMGSYS_OMC_LITE			828
+/* IMG software token for QoS */
+#define CMDQ_SYNC_TOKEN_IMGSYS_QOS_LOCK			829
+/* IMG software token for Qof */
+#define CMDQ_SYNC_TOKEN_DIP_POWER_CTRL			830
+#define CMDQ_SYNC_TOKEN_DIP_TRIG_PWR_ON			831
+#define CMDQ_SYNC_TOKEN_DIP_PWR_ON			832
+#define CMDQ_SYNC_TOKEN_DIP_TRIG_PWR_OFF		833
+#define CMDQ_SYNC_TOKEN_DIP_PWR_OFF			834
+#define CMDQ_SYNC_TOKEN_DIP_PWR_HAND_SHAKE		835
+#define CMDQ_SYNC_TOKEN_TRAW_POWER_CTRL			836
+#define CMDQ_SYNC_TOKEN_TRAW_TRIG_PWR_ON		837
+#define CMDQ_SYNC_TOKEN_TRAW_PWR_ON			838
+#define CMDQ_SYNC_TOKEN_TRAW_TRIG_PWR_OFF		839
+#define CMDQ_SYNC_TOKEN_TRAW_PWR_OFF			840
+#define CMDQ_SYNC_TOKEN_TRAW_PWR_HAND_SHAKE		841
+/* End of GCE1 software token */
+
+/* Begin of common software token */
+/*
+ * Notify normal CMDQ there are some secure task done
+ * MUST NOT CHANGE, this token sync with secure world
+ */
+#define CMDQ_SYNC_SECURE_THR_EOF			940
+/* CMDQ use software token */
+#define CMDQ_SYNC_TOKEN_USER_0				941
+#define CMDQ_SYNC_TOKEN_USER_1				942
+#define CMDQ_SYNC_TOKEN_POLL_MONITOR			943
+#define CMDQ_SYNC_TOKEN_TPR_LOCK			942
+/* TZMP software token */
+#define CMDQ_SYNC_TOKEN_TZMP_DISP_WAIT			943
+#define CMDQ_SYNC_TOKEN_TZMP_DISP_SET			944
+#define CMDQ_SYNC_TOKEN_TZMP_ISP_WAIT			945
+#define CMDQ_SYNC_TOKEN_TZMP_ISP_SET			946
+#define CMDQ_SYNC_TOKEN_TZMP_AIE_WAIT			947
+#define CMDQ_SYNC_TOKEN_TZMP_AIE_SET			948
+#define CMDQ_SYNC_TOKEN_TZMP_ADL_WAIT			949
+#define CMDQ_SYNC_TOKEN_TZMP_ADL_SET			950
+/* PREBUILT software token */
+#define CMDQ_SYNC_TOKEN_PREBUILT_MDP_LOCK		951
+#define CMDQ_SYNC_TOKEN_PREBUILT_MML_LOCK		952
+#define CMDQ_SYNC_TOKEN_PREBUILT_VFMT_LOCK		953
+#define CMDQ_SYNC_TOKEN_PREBUILT_DISP_LOCK		954
+#define CMDQ_SYNC_TOKEN_DISP_VA_START			955
+#define CMDQ_SYNC_TOKEN_DISP_VA_END			956
+
+/*
+ * Event for GPR timer, used in sleep and poll with timeout
+ *
+ * CMDQ_TOKEN_GPR_TIMER_R0~15: 994 ~ 1009
+ */
+#define CMDQ_TOKEN_GPR_TIMER_R(n)			(994 + (n))
+/* End of common software token */
+
+#endif
diff --git a/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h
new file mode 100644
index 000000000000..99535a6d5cba
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h
@@ -0,0 +1,1574 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Guodong Liu <guodong.liu@mediatek.com>
+ *         Lei Xue <lei.xue@mediatek.com>
+ *         Cathy Xu <ot_cathy.xu@mediatek.com>
+ */
+
+#ifndef __MT8196_PINFUNC_H
+#define __MT8196_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_DMIC1_CLK (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_SPI3_A_MO (MTK_PIN_NO(0) | 3)
+#define PINMUX_GPIO0__FUNC_FMI2S_B_LRCK (MTK_PIN_NO(0) | 4)
+#define PINMUX_GPIO0__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(0) | 5)
+#define PINMUX_GPIO0__FUNC_TP_GPIO14_AO (MTK_PIN_NO(0) | 6)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_DMIC1_DAT (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_SRCLKENAI1 (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_SPI3_A_MI (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_FMI2S_B_DI (MTK_PIN_NO(1) | 4)
+#define PINMUX_GPIO1__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(1) | 5)
+#define PINMUX_GPIO1__FUNC_TP_GPIO15_AO (MTK_PIN_NO(1) | 6)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_PWM_VLP (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_DSI_HSYNC (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_RG_TSFDC_LDO_EN (MTK_PIN_NO(2) | 5)
+#define PINMUX_GPIO2__FUNC_TP_GPIO8_AO (MTK_PIN_NO(2) | 6)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_MD_INT0 (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_DSI1_HSYNC (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_DA_TSFDC_LDO_MODE (MTK_PIN_NO(3) | 5)
+#define PINMUX_GPIO3__FUNC_TP_GPIO9_AO (MTK_PIN_NO(3) | 6)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_DISP_PWM1 (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(4) | 2)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_LCM1_RST (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_SPI7_A_CLK (MTK_PIN_NO(5) | 2)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_DSI1_TE (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_SPI7_A_CSB (MTK_PIN_NO(6) | 2)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_SPI7_A_MO (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_GPS_PPS0 (MTK_PIN_NO(7) | 3)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_SPI7_A_MI (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_EDP_TX_HPD (MTK_PIN_NO(8) | 3)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_I2SIN1_LRCK (MTK_PIN_NO(9) | 3)
+#define PINMUX_GPIO9__FUNC_RG_TSFDC_LDO_REFSEL0 (MTK_PIN_NO(9) | 7)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_I2SOUT1_DO (MTK_PIN_NO(10) | 3)
+#define PINMUX_GPIO10__FUNC_RG_TSFDC_LDO_REFSEL1 (MTK_PIN_NO(10) | 7)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_FMI2S_B_BCK (MTK_PIN_NO(11) | 4)
+#define PINMUX_GPIO11__FUNC_DBG_MON_A30 (MTK_PIN_NO(11) | 7)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_I2SIN1_DI_B (MTK_PIN_NO(12) | 3)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_EDP_TX_HPD (MTK_PIN_NO(13) | 1)
+#define PINMUX_GPIO13__FUNC_GPS_PPS1 (MTK_PIN_NO(13) | 2)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_SRCLKENA2 (MTK_PIN_NO(14) | 1)
+#define PINMUX_GPIO14__FUNC_DSI2_TE (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_MD_INT3 (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_TP_GPIO8_AO (MTK_PIN_NO(14) | 6)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_SRCLKENAI0 (MTK_PIN_NO(15) | 1)
+#define PINMUX_GPIO15__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_UCTS0 (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_MD_INT4 (MTK_PIN_NO(15) | 4)
+#define PINMUX_GPIO15__FUNC_I2SOUT2_DO (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_TP_GPIO9_AO (MTK_PIN_NO(15) | 6)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_SRCLKENAI1 (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_DP_TX_HPD (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_URTS0 (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(16) | 4)
+#define PINMUX_GPIO16__FUNC_KPROW2 (MTK_PIN_NO(16) | 5)
+#define PINMUX_GPIO16__FUNC_TP_GPIO10_AO (MTK_PIN_NO(16) | 6)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_MD_INT0 (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_DP_OC_EN (MTK_PIN_NO(17) | 2)
+#define PINMUX_GPIO17__FUNC_UCTS1 (MTK_PIN_NO(17) | 3)
+#define PINMUX_GPIO17__FUNC_MD_NTN_URXD1 (MTK_PIN_NO(17) | 4)
+#define PINMUX_GPIO17__FUNC_KPCOL2 (MTK_PIN_NO(17) | 5)
+#define PINMUX_GPIO17__FUNC_TP_GPIO11_AO (MTK_PIN_NO(17) | 6)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_DMIC1_CLK (MTK_PIN_NO(18) | 1)
+#define PINMUX_GPIO18__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(18) | 2)
+#define PINMUX_GPIO18__FUNC_URTS1 (MTK_PIN_NO(18) | 3)
+#define PINMUX_GPIO18__FUNC_MD_NTN_UTXD1 (MTK_PIN_NO(18) | 4)
+#define PINMUX_GPIO18__FUNC_I2SIN2_DI (MTK_PIN_NO(18) | 5)
+#define PINMUX_GPIO18__FUNC_TP_UTXD_GNSS_VLP (MTK_PIN_NO(18) | 6)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_DMIC1_DAT (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(19) | 2)
+#define PINMUX_GPIO19__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(19) | 3)
+#define PINMUX_GPIO19__FUNC_CLKM3_A (MTK_PIN_NO(19) | 4)
+#define PINMUX_GPIO19__FUNC_I2SIN2_BCK (MTK_PIN_NO(19) | 5)
+#define PINMUX_GPIO19__FUNC_TP_URXD_GNSS_VLP (MTK_PIN_NO(19) | 6)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_IDDIG (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_LCM2_RST (MTK_PIN_NO(20) | 2)
+#define PINMUX_GPIO20__FUNC_GPS_PPS1 (MTK_PIN_NO(20) | 3)
+#define PINMUX_GPIO20__FUNC_CLKM2_A (MTK_PIN_NO(20) | 4)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_BPI_BUS11 (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_PCIE_PERSTN_1P (MTK_PIN_NO(21) | 2)
+#define PINMUX_GPIO21__FUNC_DSI1_TE (MTK_PIN_NO(21) | 3)
+#define PINMUX_GPIO21__FUNC_DMIC_CLK (MTK_PIN_NO(21) | 4)
+#define PINMUX_GPIO21__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(21) | 5)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_BPI_BUS12 (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_PCIE_CLKREQN_1P (MTK_PIN_NO(22) | 2)
+#define PINMUX_GPIO22__FUNC_DSI2_TE (MTK_PIN_NO(22) | 3)
+#define PINMUX_GPIO22__FUNC_DMIC_DAT (MTK_PIN_NO(22) | 4)
+#define PINMUX_GPIO22__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(22) | 5)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_BPI_BUS13 (MTK_PIN_NO(23) | 1)
+#define PINMUX_GPIO23__FUNC_PCIE_WAKEN_1P (MTK_PIN_NO(23) | 2)
+#define PINMUX_GPIO23__FUNC_DSI3_TE (MTK_PIN_NO(23) | 3)
+#define PINMUX_GPIO23__FUNC_DMIC1_CLK (MTK_PIN_NO(23) | 4)
+#define PINMUX_GPIO23__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(23) | 5)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_BPI_BUS14 (MTK_PIN_NO(24) | 1)
+#define PINMUX_GPIO24__FUNC_LCM1_RST (MTK_PIN_NO(24) | 2)
+#define PINMUX_GPIO24__FUNC_AGPS_SYNC (MTK_PIN_NO(24) | 3)
+#define PINMUX_GPIO24__FUNC_DMIC1_DAT (MTK_PIN_NO(24) | 4)
+#define PINMUX_GPIO24__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(24) | 5)
+#define PINMUX_GPIO24__FUNC_DISP_PWM1 (MTK_PIN_NO(24) | 6)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_BPI_BUS15 (MTK_PIN_NO(25) | 1)
+#define PINMUX_GPIO25__FUNC_LCM2_RST (MTK_PIN_NO(25) | 2)
+#define PINMUX_GPIO25__FUNC_SRCLKENAI1 (MTK_PIN_NO(25) | 3)
+#define PINMUX_GPIO25__FUNC_DMIC2_CLK (MTK_PIN_NO(25) | 4)
+#define PINMUX_GPIO25__FUNC_DISP_PWM2 (MTK_PIN_NO(25) | 6)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_BPI_BUS16 (MTK_PIN_NO(26) | 1)
+#define PINMUX_GPIO26__FUNC_LCM3_RST (MTK_PIN_NO(26) | 2)
+#define PINMUX_GPIO26__FUNC_DMIC2_DAT (MTK_PIN_NO(26) | 4)
+#define PINMUX_GPIO26__FUNC_DISP_PWM3 (MTK_PIN_NO(26) | 6)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_BPI_BUS17 (MTK_PIN_NO(27) | 1)
+#define PINMUX_GPIO27__FUNC_UTXD4 (MTK_PIN_NO(27) | 2)
+#define PINMUX_GPIO27__FUNC_DISP_PWM4 (MTK_PIN_NO(27) | 6)
+#define PINMUX_GPIO27__FUNC_DBG_MON_A20 (MTK_PIN_NO(27) | 7)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_BPI_BUS18 (MTK_PIN_NO(28) | 1)
+#define PINMUX_GPIO28__FUNC_URXD4 (MTK_PIN_NO(28) | 2)
+#define PINMUX_GPIO28__FUNC_SPI2_A_MI (MTK_PIN_NO(28) | 3)
+#define PINMUX_GPIO28__FUNC_CLKM0_A (MTK_PIN_NO(28) | 4)
+#define PINMUX_GPIO28__FUNC_DBG_MON_A21 (MTK_PIN_NO(28) | 7)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_BPI_BUS19 (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_MD_NTN_UTXD1 (MTK_PIN_NO(29) | 2)
+#define PINMUX_GPIO29__FUNC_SPI2_A_MO (MTK_PIN_NO(29) | 3)
+#define PINMUX_GPIO29__FUNC_CLKM1_A (MTK_PIN_NO(29) | 4)
+#define PINMUX_GPIO29__FUNC_UCTS4 (MTK_PIN_NO(29) | 6)
+#define PINMUX_GPIO29__FUNC_DBG_MON_A17 (MTK_PIN_NO(29) | 7)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_BPI_BUS20 (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_MD_NTN_URXD1 (MTK_PIN_NO(30) | 2)
+#define PINMUX_GPIO30__FUNC_SPI2_A_CLK (MTK_PIN_NO(30) | 3)
+#define PINMUX_GPIO30__FUNC_CLKM2_A (MTK_PIN_NO(30) | 4)
+#define PINMUX_GPIO30__FUNC_DSI3_HSYNC (MTK_PIN_NO(30) | 5)
+#define PINMUX_GPIO30__FUNC_URTS4 (MTK_PIN_NO(30) | 6)
+#define PINMUX_GPIO30__FUNC_DBG_MON_A18 (MTK_PIN_NO(30) | 7)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_BPI_BUS21 (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_SPI2_A_CSB (MTK_PIN_NO(31) | 3)
+#define PINMUX_GPIO31__FUNC_CLKM3_A (MTK_PIN_NO(31) | 4)
+#define PINMUX_GPIO31__FUNC_EDP_TX_HPD (MTK_PIN_NO(31) | 6)
+#define PINMUX_GPIO31__FUNC_DBG_MON_A19 (MTK_PIN_NO(31) | 7)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_LCM4_RST (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_DP_TX_HPD (MTK_PIN_NO(32) | 2)
+#define PINMUX_GPIO32__FUNC_SSPM_JTAG_TCK_VLP (MTK_PIN_NO(32) | 3)
+#define PINMUX_GPIO32__FUNC_ADSP_JTAG0_TCK (MTK_PIN_NO(32) | 4)
+#define PINMUX_GPIO32__FUNC_SCP_JTAG0_TCK_VLP (MTK_PIN_NO(32) | 5)
+#define PINMUX_GPIO32__FUNC_SPU0_TCK (MTK_PIN_NO(32) | 6)
+#define PINMUX_GPIO32__FUNC_IO_JTAG_TCK (MTK_PIN_NO(32) | 7)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_DSI4_TE (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_DP_OC_EN (MTK_PIN_NO(33) | 2)
+#define PINMUX_GPIO33__FUNC_SSPM_JTAG_TRSTN_VLP (MTK_PIN_NO(33) | 3)
+#define PINMUX_GPIO33__FUNC_ADSP_JTAG0_TRSTN (MTK_PIN_NO(33) | 4)
+#define PINMUX_GPIO33__FUNC_SCP_JTAG0_TRSTN_VLP (MTK_PIN_NO(33) | 5)
+#define PINMUX_GPIO33__FUNC_SPU0_NTRST (MTK_PIN_NO(33) | 6)
+#define PINMUX_GPIO33__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(33) | 7)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_UCTS5 (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(34) | 2)
+#define PINMUX_GPIO34__FUNC_SSPM_JTAG_TDI_VLP (MTK_PIN_NO(34) | 3)
+#define PINMUX_GPIO34__FUNC_ADSP_JTAG0_TDI (MTK_PIN_NO(34) | 4)
+#define PINMUX_GPIO34__FUNC_SCP_JTAG0_TDI_VLP (MTK_PIN_NO(34) | 5)
+#define PINMUX_GPIO34__FUNC_SPU0_TDI (MTK_PIN_NO(34) | 6)
+#define PINMUX_GPIO34__FUNC_IO_JTAG_TDI (MTK_PIN_NO(34) | 7)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_URTS5 (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(35) | 2)
+#define PINMUX_GPIO35__FUNC_SSPM_JTAG_TDO_VLP (MTK_PIN_NO(35) | 3)
+#define PINMUX_GPIO35__FUNC_ADSP_JTAG0_TDO (MTK_PIN_NO(35) | 4)
+#define PINMUX_GPIO35__FUNC_SCP_JTAG0_TDO_VLP (MTK_PIN_NO(35) | 5)
+#define PINMUX_GPIO35__FUNC_SPU0_TDO (MTK_PIN_NO(35) | 6)
+#define PINMUX_GPIO35__FUNC_IO_JTAG_TDO (MTK_PIN_NO(35) | 7)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_UTXD5 (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_SSPM_JTAG_TMS_VLP (MTK_PIN_NO(36) | 3)
+#define PINMUX_GPIO36__FUNC_ADSP_JTAG0_TMS (MTK_PIN_NO(36) | 4)
+#define PINMUX_GPIO36__FUNC_SCP_JTAG0_TMS_VLP (MTK_PIN_NO(36) | 5)
+#define PINMUX_GPIO36__FUNC_SPU0_TMS (MTK_PIN_NO(36) | 6)
+#define PINMUX_GPIO36__FUNC_IO_JTAG_TMS (MTK_PIN_NO(36) | 7)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_URXD5 (MTK_PIN_NO(37) | 1)
+#define PINMUX_GPIO37__FUNC_MD_INT3 (MTK_PIN_NO(37) | 3)
+#define PINMUX_GPIO37__FUNC_CLKM0_B (MTK_PIN_NO(37) | 4)
+#define PINMUX_GPIO37__FUNC_TP_GPIO5_AO (MTK_PIN_NO(37) | 5)
+#define PINMUX_GPIO37__FUNC_SPU0_UTX (MTK_PIN_NO(37) | 6)
+#define PINMUX_GPIO37__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(37) | 7)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(38) | 2)
+#define PINMUX_GPIO38__FUNC_MD_INT4 (MTK_PIN_NO(38) | 3)
+#define PINMUX_GPIO38__FUNC_CLKM1_B (MTK_PIN_NO(38) | 4)
+#define PINMUX_GPIO38__FUNC_TP_GPIO6_AO (MTK_PIN_NO(38) | 5)
+#define PINMUX_GPIO38__FUNC_SPU0_URX (MTK_PIN_NO(38) | 6)
+#define PINMUX_GPIO38__FUNC_DAP_MD32_SWD (MTK_PIN_NO(38) | 7)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_I2S_MCK0 (MTK_PIN_NO(39) | 1)
+#define PINMUX_GPIO39__FUNC_GPS_PPS0 (MTK_PIN_NO(39) | 3)
+#define PINMUX_GPIO39__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(39) | 4)
+#define PINMUX_GPIO39__FUNC_DBG_MON_B12 (MTK_PIN_NO(39) | 7)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_I2SIN6_0_BCK (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_SPI4_B_CLK (MTK_PIN_NO(40) | 3)
+#define PINMUX_GPIO40__FUNC_UCTS2 (MTK_PIN_NO(40) | 4)
+#define PINMUX_GPIO40__FUNC_CCU1_UTXD (MTK_PIN_NO(40) | 5)
+#define PINMUX_GPIO40__FUNC_DBG_MON_B13 (MTK_PIN_NO(40) | 7)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_I2SIN6_0_LRCK (MTK_PIN_NO(41) | 1)
+#define PINMUX_GPIO41__FUNC_SPI4_B_CSB (MTK_PIN_NO(41) | 3)
+#define PINMUX_GPIO41__FUNC_URTS2 (MTK_PIN_NO(41) | 4)
+#define PINMUX_GPIO41__FUNC_CCU1_URXD (MTK_PIN_NO(41) | 5)
+#define PINMUX_GPIO41__FUNC_DBG_MON_B14 (MTK_PIN_NO(41) | 7)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_I2SIN6_0_DI (MTK_PIN_NO(42) | 1)
+#define PINMUX_GPIO42__FUNC_SPI4_B_MI (MTK_PIN_NO(42) | 3)
+#define PINMUX_GPIO42__FUNC_URXD2 (MTK_PIN_NO(42) | 4)
+#define PINMUX_GPIO42__FUNC_CCU1_URTS (MTK_PIN_NO(42) | 5)
+#define PINMUX_GPIO42__FUNC_MD32_0_RXD (MTK_PIN_NO(42) | 6)
+#define PINMUX_GPIO42__FUNC_DBG_MON_B15 (MTK_PIN_NO(42) | 7)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_I2SOUT6_0_DO (MTK_PIN_NO(43) | 1)
+#define PINMUX_GPIO43__FUNC_SPI4_B_MO (MTK_PIN_NO(43) | 3)
+#define PINMUX_GPIO43__FUNC_UTXD2 (MTK_PIN_NO(43) | 4)
+#define PINMUX_GPIO43__FUNC_CCU1_UCTS (MTK_PIN_NO(43) | 5)
+#define PINMUX_GPIO43__FUNC_MD32_0_TXD (MTK_PIN_NO(43) | 6)
+#define PINMUX_GPIO43__FUNC_DBG_MON_B16 (MTK_PIN_NO(43) | 7)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(44) | 1)
+#define PINMUX_GPIO44__FUNC_SPI3_A_CLK (MTK_PIN_NO(44) | 3)
+#define PINMUX_GPIO44__FUNC_TP_GPIO10_AO (MTK_PIN_NO(44) | 6)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(45) | 1)
+#define PINMUX_GPIO45__FUNC_DSI2_HSYNC (MTK_PIN_NO(45) | 2)
+#define PINMUX_GPIO45__FUNC_SPI3_A_CSB (MTK_PIN_NO(45) | 3)
+#define PINMUX_GPIO45__FUNC_PWM_VLP (MTK_PIN_NO(45) | 4)
+#define PINMUX_GPIO45__FUNC_TP_GPIO11_AO (MTK_PIN_NO(45) | 6)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_SCP_SCL4 (MTK_PIN_NO(46) | 1)
+#define PINMUX_GPIO46__FUNC_PWM_VLP (MTK_PIN_NO(46) | 2)
+#define PINMUX_GPIO46__FUNC_SCP_ILDO_DTEST1_VLP (MTK_PIN_NO(46) | 4)
+#define PINMUX_GPIO46__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(46) | 5)
+#define PINMUX_GPIO46__FUNC_TP_GPIO0_AO (MTK_PIN_NO(46) | 6)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_SCP_SDA4 (MTK_PIN_NO(47) | 1)
+#define PINMUX_GPIO47__FUNC_SCP_ILDO_DTEST2_VLP (MTK_PIN_NO(47) | 4)
+#define PINMUX_GPIO47__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(47) | 5)
+#define PINMUX_GPIO47__FUNC_TP_GPIO1_AO (MTK_PIN_NO(47) | 6)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_SCP_SCL5 (MTK_PIN_NO(48) | 1)
+#define PINMUX_GPIO48__FUNC_PWM_VLP (MTK_PIN_NO(48) | 2)
+#define PINMUX_GPIO48__FUNC_CCU0_UTXD (MTK_PIN_NO(48) | 3)
+#define PINMUX_GPIO48__FUNC_SCP_ILDO_DTEST3_VLP (MTK_PIN_NO(48) | 4)
+#define PINMUX_GPIO48__FUNC_TP_GPIO2_AO (MTK_PIN_NO(48) | 6)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_SCP_SDA5 (MTK_PIN_NO(49) | 1)
+#define PINMUX_GPIO49__FUNC_CCU0_URXD (MTK_PIN_NO(49) | 3)
+#define PINMUX_GPIO49__FUNC_SCP_ILDO_DTEST4_VLP (MTK_PIN_NO(49) | 4)
+#define PINMUX_GPIO49__FUNC_TP_GPIO3_AO (MTK_PIN_NO(49) | 6)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_SCP_SCL6 (MTK_PIN_NO(50) | 1)
+#define PINMUX_GPIO50__FUNC_PWM_VLP (MTK_PIN_NO(50) | 2)
+#define PINMUX_GPIO50__FUNC_CCU0_URTS (MTK_PIN_NO(50) | 3)
+#define PINMUX_GPIO50__FUNC_DSI_HSYNC (MTK_PIN_NO(50) | 4)
+#define PINMUX_GPIO50__FUNC_TP_GPIO4_AO (MTK_PIN_NO(50) | 6)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_SCP_SDA6 (MTK_PIN_NO(51) | 1)
+#define PINMUX_GPIO51__FUNC_CCU0_UCTS (MTK_PIN_NO(51) | 3)
+#define PINMUX_GPIO51__FUNC_DSI1_HSYNC (MTK_PIN_NO(51) | 4)
+#define PINMUX_GPIO51__FUNC_TP_GPIO5_AO (MTK_PIN_NO(51) | 6)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_SCP_SCL1 (MTK_PIN_NO(52) | 1)
+#define PINMUX_GPIO52__FUNC_TDM_DATA2 (MTK_PIN_NO(52) | 3)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_SCP_SDA1 (MTK_PIN_NO(53) | 1)
+#define PINMUX_GPIO53__FUNC_TDM_DATA3 (MTK_PIN_NO(53) | 3)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(54) | 1)
+#define PINMUX_GPIO54__FUNC_TDM_MCK (MTK_PIN_NO(54) | 3)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_AUD_CLK_MISO (MTK_PIN_NO(55) | 1)
+#define PINMUX_GPIO55__FUNC_I2SOUT2_BCK (MTK_PIN_NO(55) | 2)
+#define PINMUX_GPIO55__FUNC_TDM_BCK (MTK_PIN_NO(55) | 3)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(56) | 1)
+#define PINMUX_GPIO56__FUNC_I2SOUT2_LRCK (MTK_PIN_NO(56) | 2)
+#define PINMUX_GPIO56__FUNC_TDM_LRCK (MTK_PIN_NO(56) | 3)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(57) | 1)
+#define PINMUX_GPIO57__FUNC_I2SOUT2_DO (MTK_PIN_NO(57) | 2)
+#define PINMUX_GPIO57__FUNC_TDM_DATA0 (MTK_PIN_NO(57) | 3)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(58) | 1)
+#define PINMUX_GPIO58__FUNC_TDM_DATA1 (MTK_PIN_NO(58) | 3)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(59) | 1)
+#define PINMUX_GPIO59__FUNC_I2SIN1_BCK (MTK_PIN_NO(59) | 3)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_KPCOL0 (MTK_PIN_NO(60) | 1)
+#define PINMUX_GPIO60__FUNC_TP_GPIO13_AO (MTK_PIN_NO(60) | 6)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_MCU_M_PMIC_POC_I (MTK_PIN_NO(61) | 1)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_MCU_B_PMIC_POC_I (MTK_PIN_NO(62) | 1)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_MFG_PMIC_POC_I (MTK_PIN_NO(63) | 1)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_PRE_UVLO (MTK_PIN_NO(64) | 1)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_DPM2PMIC (MTK_PIN_NO(65) | 1)
+#define PINMUX_GPIO65__FUNC_SRCLKENA1 (MTK_PIN_NO(65) | 2)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_WATCHDOG (MTK_PIN_NO(66) | 1)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_SRCLKENA0 (MTK_PIN_NO(67) | 1)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(68) | 1)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_RTC32K_CK (MTK_PIN_NO(69) | 1)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_CMFLASH0 (MTK_PIN_NO(70) | 1)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_DCXO_FPM_LPM (MTK_PIN_NO(74) | 1)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_SPMI_M_SCL (MTK_PIN_NO(75) | 1)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_SPMI_M_SDA (MTK_PIN_NO(76) | 1)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_SPMI_P_SCL (MTK_PIN_NO(77) | 1)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_SPMI_P_SDA (MTK_PIN_NO(78) | 1)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_CMMCLK0 (MTK_PIN_NO(79) | 1)
+#define PINMUX_GPIO79__FUNC_MD_INT4 (MTK_PIN_NO(79) | 2)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_CMMCLK1 (MTK_PIN_NO(80) | 1)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_SCP_SPI0_CK (MTK_PIN_NO(81) | 1)
+#define PINMUX_GPIO81__FUNC_SPI6_B_CLK (MTK_PIN_NO(81) | 2)
+#define PINMUX_GPIO81__FUNC_PWM_VLP (MTK_PIN_NO(81) | 3)
+#define PINMUX_GPIO81__FUNC_I2SOUT5_BCK (MTK_PIN_NO(81) | 4)
+#define PINMUX_GPIO81__FUNC_TP_GPIO0_AO (MTK_PIN_NO(81) | 6)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_SCP_SPI0_CS (MTK_PIN_NO(82) | 1)
+#define PINMUX_GPIO82__FUNC_SPI6_B_CSB (MTK_PIN_NO(82) | 2)
+#define PINMUX_GPIO82__FUNC_I2SOUT5_LRCK (MTK_PIN_NO(82) | 4)
+#define PINMUX_GPIO82__FUNC_TP_GPIO1_AO (MTK_PIN_NO(82) | 6)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_SCP_SPI0_MO (MTK_PIN_NO(83) | 1)
+#define PINMUX_GPIO83__FUNC_SPI6_B_MO (MTK_PIN_NO(83) | 2)
+#define PINMUX_GPIO83__FUNC_I2SOUT5_DATA0 (MTK_PIN_NO(83) | 4)
+#define PINMUX_GPIO83__FUNC_TP_GPIO2_AO (MTK_PIN_NO(83) | 6)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_SCP_SPI0_MI (MTK_PIN_NO(84) | 1)
+#define PINMUX_GPIO84__FUNC_SPI6_B_MI (MTK_PIN_NO(84) | 2)
+#define PINMUX_GPIO84__FUNC_I2SOUT5_DATA1 (MTK_PIN_NO(84) | 4)
+#define PINMUX_GPIO84__FUNC_TP_GPIO3_AO (MTK_PIN_NO(84) | 6)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_SCP_SPI1_CK (MTK_PIN_NO(85) | 1)
+#define PINMUX_GPIO85__FUNC_SPI7_B_CLK (MTK_PIN_NO(85) | 2)
+#define PINMUX_GPIO85__FUNC_I2SIN5_DATA0 (MTK_PIN_NO(85) | 4)
+#define PINMUX_GPIO85__FUNC_PWM_VLP (MTK_PIN_NO(85) | 5)
+#define PINMUX_GPIO85__FUNC_TP_GPIO4_AO (MTK_PIN_NO(85) | 6)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_SCP_SPI1_CS (MTK_PIN_NO(86) | 1)
+#define PINMUX_GPIO86__FUNC_SPI7_B_CSB (MTK_PIN_NO(86) | 2)
+#define PINMUX_GPIO86__FUNC_I2SIN5_DATA1 (MTK_PIN_NO(86) | 4)
+#define PINMUX_GPIO86__FUNC_TP_GPIO5_AO (MTK_PIN_NO(86) | 6)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_SCP_SPI1_MO (MTK_PIN_NO(87) | 1)
+#define PINMUX_GPIO87__FUNC_SPI7_B_MO (MTK_PIN_NO(87) | 2)
+#define PINMUX_GPIO87__FUNC_I2SIN5_BCK (MTK_PIN_NO(87) | 4)
+#define PINMUX_GPIO87__FUNC_TP_GPIO6_AO (MTK_PIN_NO(87) | 6)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_SCP_SPI1_MI (MTK_PIN_NO(88) | 1)
+#define PINMUX_GPIO88__FUNC_SPI7_B_MI (MTK_PIN_NO(88) | 2)
+#define PINMUX_GPIO88__FUNC_I2SIN5_LRCK (MTK_PIN_NO(88) | 4)
+#define PINMUX_GPIO88__FUNC_TP_GPIO7_AO (MTK_PIN_NO(88) | 6)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_DSI_TE (MTK_PIN_NO(89) | 1)
+#define PINMUX_GPIO89__FUNC_DSI1_TE (MTK_PIN_NO(89) | 2)
+#define PINMUX_GPIO89__FUNC_DBG_MON_B30 (MTK_PIN_NO(89) | 7)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_LCM_RST (MTK_PIN_NO(90) | 1)
+#define PINMUX_GPIO90__FUNC_LCM1_RST (MTK_PIN_NO(90) | 2)
+#define PINMUX_GPIO90__FUNC_DBG_MON_B31 (MTK_PIN_NO(90) | 7)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_CMFLASH2 (MTK_PIN_NO(91) | 1)
+#define PINMUX_GPIO91__FUNC_SF_D0 (MTK_PIN_NO(91) | 2)
+#define PINMUX_GPIO91__FUNC_SRCLKENAI1 (MTK_PIN_NO(91) | 3)
+#define PINMUX_GPIO91__FUNC_KPCOL2 (MTK_PIN_NO(91) | 5)
+#define PINMUX_GPIO91__FUNC_TP_GPIO11_AO (MTK_PIN_NO(91) | 6)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_CMFLASH3 (MTK_PIN_NO(92) | 1)
+#define PINMUX_GPIO92__FUNC_SF_D1 (MTK_PIN_NO(92) | 2)
+#define PINMUX_GPIO92__FUNC_DISP_PWM1 (MTK_PIN_NO(92) | 4)
+#define PINMUX_GPIO92__FUNC_TP_GPIO12_AO (MTK_PIN_NO(92) | 6)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_CMFLASH1 (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_SF_D2 (MTK_PIN_NO(93) | 2)
+#define PINMUX_GPIO93__FUNC_SRCLKENAI0 (MTK_PIN_NO(93) | 3)
+#define PINMUX_GPIO93__FUNC_KPROW2 (MTK_PIN_NO(93) | 5)
+#define PINMUX_GPIO93__FUNC_TP_GPIO13_AO (MTK_PIN_NO(93) | 6)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_I2S_MCK1 (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_SF_D3 (MTK_PIN_NO(94) | 2)
+#define PINMUX_GPIO94__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(94) | 4)
+#define PINMUX_GPIO94__FUNC_CLKM0_A (MTK_PIN_NO(94) | 5)
+#define PINMUX_GPIO94__FUNC_TP_GPIO14_AO (MTK_PIN_NO(94) | 6)
+#define PINMUX_GPIO94__FUNC_DBG_MON_B18 (MTK_PIN_NO(94) | 7)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_I2SIN1_BCK (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_I2SIN4_BCK (MTK_PIN_NO(95) | 2)
+#define PINMUX_GPIO95__FUNC_SPI6_A_CLK (MTK_PIN_NO(95) | 3)
+#define PINMUX_GPIO95__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(95) | 4)
+#define PINMUX_GPIO95__FUNC_CLKM1_A (MTK_PIN_NO(95) | 5)
+#define PINMUX_GPIO95__FUNC_TP_GPIO15_AO (MTK_PIN_NO(95) | 6)
+#define PINMUX_GPIO95__FUNC_DBG_MON_B19 (MTK_PIN_NO(95) | 7)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_I2SIN1_LRCK (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_I2SIN4_LRCK (MTK_PIN_NO(96) | 2)
+#define PINMUX_GPIO96__FUNC_SPI6_A_CSB (MTK_PIN_NO(96) | 3)
+#define PINMUX_GPIO96__FUNC_MD32_2_GPIO0 (MTK_PIN_NO(96) | 4)
+#define PINMUX_GPIO96__FUNC_CLKM2_A (MTK_PIN_NO(96) | 5)
+#define PINMUX_GPIO96__FUNC_DBG_MON_B20 (MTK_PIN_NO(96) | 7)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_I2SIN1_DI_A (MTK_PIN_NO(97) | 1)
+#define PINMUX_GPIO97__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(97) | 2)
+#define PINMUX_GPIO97__FUNC_SPI6_A_MO (MTK_PIN_NO(97) | 3)
+#define PINMUX_GPIO97__FUNC_MD32_3_GPIO0 (MTK_PIN_NO(97) | 4)
+#define PINMUX_GPIO97__FUNC_CLKM3_A (MTK_PIN_NO(97) | 5)
+#define PINMUX_GPIO97__FUNC_DBG_MON_B21 (MTK_PIN_NO(97) | 7)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_I2SOUT1_DO (MTK_PIN_NO(98) | 1)
+#define PINMUX_GPIO98__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(98) | 2)
+#define PINMUX_GPIO98__FUNC_SPI6_A_MI (MTK_PIN_NO(98) | 3)
+#define PINMUX_GPIO98__FUNC_DBG_MON_B22 (MTK_PIN_NO(98) | 7)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_LCM2_RST (MTK_PIN_NO(99) | 2)
+#define PINMUX_GPIO99__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(99) | 3)
+#define PINMUX_GPIO99__FUNC_SPU0_SCL (MTK_PIN_NO(99) | 4)
+#define PINMUX_GPIO99__FUNC_DBG_MON_B24 (MTK_PIN_NO(99) | 7)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_DSI2_TE (MTK_PIN_NO(100) | 2)
+#define PINMUX_GPIO100__FUNC_SPU0_SDA (MTK_PIN_NO(100) | 4)
+#define PINMUX_GPIO100__FUNC_DBG_MON_B25 (MTK_PIN_NO(100) | 7)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_SCL10 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_SF_CS (MTK_PIN_NO(101) | 2)
+#define PINMUX_GPIO101__FUNC_SCP_DMIC1_CLK (MTK_PIN_NO(101) | 3)
+#define PINMUX_GPIO101__FUNC_I2SIN5_DATA2 (MTK_PIN_NO(101) | 4)
+#define PINMUX_GPIO101__FUNC_SCP_SCL_OIS (MTK_PIN_NO(101) | 5)
+#define PINMUX_GPIO101__FUNC_TP_GPIO10_AO (MTK_PIN_NO(101) | 6)
+#define PINMUX_GPIO101__FUNC_DBG_MON_B28 (MTK_PIN_NO(101) | 7)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_SDA10 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_SF_CK (MTK_PIN_NO(102) | 2)
+#define PINMUX_GPIO102__FUNC_SCP_DMIC1_DAT (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_I2SIN5_DATA3 (MTK_PIN_NO(102) | 4)
+#define PINMUX_GPIO102__FUNC_SCP_SDA_OIS (MTK_PIN_NO(102) | 5)
+#define PINMUX_GPIO102__FUNC_TP_GPIO11_AO (MTK_PIN_NO(102) | 6)
+#define PINMUX_GPIO102__FUNC_DBG_MON_B29 (MTK_PIN_NO(102) | 7)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_DISP_PWM (MTK_PIN_NO(103) | 1)
+#define PINMUX_GPIO103__FUNC_DSI1_TE (MTK_PIN_NO(103) | 2)
+#define PINMUX_GPIO103__FUNC_I2S_MCK0 (MTK_PIN_NO(103) | 5)
+#define PINMUX_GPIO103__FUNC_DBG_MON_B23 (MTK_PIN_NO(103) | 7)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_SCL6 (MTK_PIN_NO(104) | 1)
+#define PINMUX_GPIO104__FUNC_SPU1_SCL (MTK_PIN_NO(104) | 2)
+#define PINMUX_GPIO104__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(104) | 3)
+#define PINMUX_GPIO104__FUNC_USB_DRVVBUS_2P (MTK_PIN_NO(104) | 4)
+#define PINMUX_GPIO104__FUNC_I2S_MCK1 (MTK_PIN_NO(104) | 5)
+#define PINMUX_GPIO104__FUNC_IDDIG_2P (MTK_PIN_NO(104) | 6)
+#define PINMUX_GPIO104__FUNC_DBG_MON_B26 (MTK_PIN_NO(104) | 7)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_SDA6 (MTK_PIN_NO(105) | 1)
+#define PINMUX_GPIO105__FUNC_SPU1_SDA (MTK_PIN_NO(105) | 2)
+#define PINMUX_GPIO105__FUNC_DISP_PWM2 (MTK_PIN_NO(105) | 3)
+#define PINMUX_GPIO105__FUNC_VBUSVALID_2P (MTK_PIN_NO(105) | 4)
+#define PINMUX_GPIO105__FUNC_I2S_MCK2 (MTK_PIN_NO(105) | 5)
+#define PINMUX_GPIO105__FUNC_VBUSVALID_3P (MTK_PIN_NO(105) | 6)
+#define PINMUX_GPIO105__FUNC_DBG_MON_B27 (MTK_PIN_NO(105) | 7)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_SCP_SPI3_CK (MTK_PIN_NO(106) | 1)
+#define PINMUX_GPIO106__FUNC_SPI3_B_CLK (MTK_PIN_NO(106) | 2)
+#define PINMUX_GPIO106__FUNC_MD_UTXD0 (MTK_PIN_NO(106) | 3)
+#define PINMUX_GPIO106__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(106) | 4)
+#define PINMUX_GPIO106__FUNC_CONN_BG_GPS_MCU_UART0_TXD (MTK_PIN_NO(106) | 5)
+#define PINMUX_GPIO106__FUNC_TP_GPIO6_AO (MTK_PIN_NO(106) | 6)
+#define PINMUX_GPIO106__FUNC_DBG_MON_B0 (MTK_PIN_NO(106) | 7)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_SCP_SPI3_CS (MTK_PIN_NO(107) | 1)
+#define PINMUX_GPIO107__FUNC_SPI3_B_CSB (MTK_PIN_NO(107) | 2)
+#define PINMUX_GPIO107__FUNC_MD_URXD0 (MTK_PIN_NO(107) | 3)
+#define PINMUX_GPIO107__FUNC_TP_URXD1_VLP (MTK_PIN_NO(107) | 4)
+#define PINMUX_GPIO107__FUNC_CONN_BG_GPS_MCU_UART0_RXD (MTK_PIN_NO(107) | 5)
+#define PINMUX_GPIO107__FUNC_TP_GPIO7_AO (MTK_PIN_NO(107) | 6)
+#define PINMUX_GPIO107__FUNC_DBG_MON_B1 (MTK_PIN_NO(107) | 7)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_SCP_SPI3_MO (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_SPI3_B_MO (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_MD_UTXD1 (MTK_PIN_NO(108) | 3)
+#define PINMUX_GPIO108__FUNC_MD32PCM_UTXD_AO_VLP (MTK_PIN_NO(108) | 4)
+#define PINMUX_GPIO108__FUNC_CONN_BG_GPS_MCU_UART1_TXD (MTK_PIN_NO(108) | 5)
+#define PINMUX_GPIO108__FUNC_TP_GPIO8_AO (MTK_PIN_NO(108) | 6)
+#define PINMUX_GPIO108__FUNC_DBG_MON_B2 (MTK_PIN_NO(108) | 7)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_SCP_SPI3_MI (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_SPI3_B_MI (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_MD_URXD1 (MTK_PIN_NO(109) | 3)
+#define PINMUX_GPIO109__FUNC_MD32PCM_URXD_AO_VLP (MTK_PIN_NO(109) | 4)
+#define PINMUX_GPIO109__FUNC_CONN_BG_GPS_MCU_UART1_RXD (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_TP_GPIO9_AO (MTK_PIN_NO(109) | 6)
+#define PINMUX_GPIO109__FUNC_DBG_MON_B3 (MTK_PIN_NO(109) | 7)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_SPI1_CLK (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_PWM_0 (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_MD_UCTS0 (MTK_PIN_NO(110) | 3)
+#define PINMUX_GPIO110__FUNC_TP_UCTS1_VLP (MTK_PIN_NO(110) | 4)
+#define PINMUX_GPIO110__FUNC_SPU0_GPIO_O (MTK_PIN_NO(110) | 6)
+#define PINMUX_GPIO110__FUNC_DBG_MON_B4 (MTK_PIN_NO(110) | 7)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_SPI1_CSB (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_PWM_1 (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_MD_URTS0 (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_TP_URTS1_VLP (MTK_PIN_NO(111) | 4)
+#define PINMUX_GPIO111__FUNC_SPU0_GPIO_I (MTK_PIN_NO(111) | 6)
+#define PINMUX_GPIO111__FUNC_DBG_MON_B5 (MTK_PIN_NO(111) | 7)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_SPI1_MO (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_PWM_2 (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_MD_UCTS1 (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_SPU1_GPIO_O (MTK_PIN_NO(112) | 6)
+#define PINMUX_GPIO112__FUNC_DBG_MON_B6 (MTK_PIN_NO(112) | 7)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_SPI1_MI (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_PWM_3 (MTK_PIN_NO(113) | 2)
+#define PINMUX_GPIO113__FUNC_MD_URTS1 (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_SPU1_GPIO_I (MTK_PIN_NO(113) | 6)
+#define PINMUX_GPIO113__FUNC_DBG_MON_B7 (MTK_PIN_NO(113) | 7)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_SPI0_SPU_CLK (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_SPI4_A_CLK (MTK_PIN_NO(114) | 2)
+#define PINMUX_GPIO114__FUNC_CONN_BG_GPS_MCU_DBG_UART_TXD (MTK_PIN_NO(114) | 5)
+#define PINMUX_GPIO114__FUNC_DBG_MON_B8 (MTK_PIN_NO(114) | 7)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_SPI0_SPU_CSB (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_SPI4_A_CSB (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_DBG_MON_B9 (MTK_PIN_NO(115) | 7)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_SPI0_SPU_MO (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_SPI4_A_MO (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_LCM1_RST (MTK_PIN_NO(116) | 3)
+#define PINMUX_GPIO116__FUNC_DBG_MON_B10 (MTK_PIN_NO(116) | 7)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_SPI0_SPU_MI (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_SPI4_A_MI (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_DSI1_TE (MTK_PIN_NO(117) | 3)
+#define PINMUX_GPIO117__FUNC_DBG_MON_B11 (MTK_PIN_NO(117) | 7)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_SPI5_CLK (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_USB_DRVVBUS (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_DP_TX_HPD (MTK_PIN_NO(118) | 3)
+#define PINMUX_GPIO118__FUNC_AD_ILDO_DTEST0 (MTK_PIN_NO(118) | 4)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_SPI5_CSB (MTK_PIN_NO(119) | 1)
+#define PINMUX_GPIO119__FUNC_VBUSVALID (MTK_PIN_NO(119) | 2)
+#define PINMUX_GPIO119__FUNC_DP_OC_EN (MTK_PIN_NO(119) | 3)
+#define PINMUX_GPIO119__FUNC_AD_ILDO_DTEST1 (MTK_PIN_NO(119) | 4)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_SPI5_MO (MTK_PIN_NO(120) | 1)
+#define PINMUX_GPIO120__FUNC_LCM2_RST (MTK_PIN_NO(120) | 2)
+#define PINMUX_GPIO120__FUNC_DP_RAUX_SBU1 (MTK_PIN_NO(120) | 3)
+#define PINMUX_GPIO120__FUNC_AD_ILDO_DTEST2 (MTK_PIN_NO(120) | 4)
+#define PINMUX_GPIO120__FUNC_IDDIG_3P (MTK_PIN_NO(120) | 6)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_SPI5_MI (MTK_PIN_NO(121) | 1)
+#define PINMUX_GPIO121__FUNC_DSI2_TE (MTK_PIN_NO(121) | 2)
+#define PINMUX_GPIO121__FUNC_DP_RAUX_SBU2 (MTK_PIN_NO(121) | 3)
+#define PINMUX_GPIO121__FUNC_AD_ILDO_DTEST3 (MTK_PIN_NO(121) | 4)
+#define PINMUX_GPIO121__FUNC_USB_DRVVBUS_3P (MTK_PIN_NO(121) | 6)
+#define PINMUX_GPIO121__FUNC_DBG_MON_B17 (MTK_PIN_NO(121) | 7)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_AP_GOOD (MTK_PIN_NO(122) | 1)
+#define PINMUX_GPIO122__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(122) | 2)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_SCL3 (MTK_PIN_NO(123) | 1)
+#define PINMUX_GPIO123__FUNC_I2SIN2_LRCK (MTK_PIN_NO(123) | 5)
+#define PINMUX_GPIO123__FUNC_TP_UTXD_MD_VCORE (MTK_PIN_NO(123) | 6)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_SDA3 (MTK_PIN_NO(124) | 1)
+#define PINMUX_GPIO124__FUNC_TP_URXD_MD_VCORE (MTK_PIN_NO(124) | 6)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_MSDC1_CLK (MTK_PIN_NO(125) | 1)
+#define PINMUX_GPIO125__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(125) | 2)
+#define PINMUX_GPIO125__FUNC_HFRP_JTAG0_TCK (MTK_PIN_NO(125) | 3)
+#define PINMUX_GPIO125__FUNC_UDI_TCK (MTK_PIN_NO(125) | 4)
+#define PINMUX_GPIO125__FUNC_CONN_BGF_DSP_L1_JCK (MTK_PIN_NO(125) | 5)
+#define PINMUX_GPIO125__FUNC_SCP_JTAG_LITTLE_TCK_VLP (MTK_PIN_NO(125) | 6)
+#define PINMUX_GPIO125__FUNC_JTCK2_SEL1 (MTK_PIN_NO(125) | 7)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_MSDC1_CMD (MTK_PIN_NO(126) | 1)
+#define PINMUX_GPIO126__FUNC_HFRP_JTAG0_TMS (MTK_PIN_NO(126) | 3)
+#define PINMUX_GPIO126__FUNC_UDI_TMS (MTK_PIN_NO(126) | 4)
+#define PINMUX_GPIO126__FUNC_CONN_BGF_DSP_L1_JMS (MTK_PIN_NO(126) | 5)
+#define PINMUX_GPIO126__FUNC_SCP_JTAG_LITTLE_TMS_VLP (MTK_PIN_NO(126) | 6)
+#define PINMUX_GPIO126__FUNC_JTMS2_SEL1 (MTK_PIN_NO(126) | 7)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_MSDC1_DAT0 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(127) | 2)
+#define PINMUX_GPIO127__FUNC_HFRP_JTAG0_TDI (MTK_PIN_NO(127) | 3)
+#define PINMUX_GPIO127__FUNC_UDI_TDI_0 (MTK_PIN_NO(127) | 4)
+#define PINMUX_GPIO127__FUNC_CONN_BGF_DSP_L1_JDI (MTK_PIN_NO(127) | 5)
+#define PINMUX_GPIO127__FUNC_SCP_JTAG_LITTLE_TDI_VLP (MTK_PIN_NO(127) | 6)
+#define PINMUX_GPIO127__FUNC_JTDI2_SEL1 (MTK_PIN_NO(127) | 7)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_MSDC1_DAT1 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(128) | 2)
+#define PINMUX_GPIO128__FUNC_HFRP_JTAG0_TDO (MTK_PIN_NO(128) | 3)
+#define PINMUX_GPIO128__FUNC_UDI_TDO_0 (MTK_PIN_NO(128) | 4)
+#define PINMUX_GPIO128__FUNC_CONN_BGF_DSP_L1_JDO (MTK_PIN_NO(128) | 5)
+#define PINMUX_GPIO128__FUNC_SCP_JTAG_LITTLE_TDO_VLP (MTK_PIN_NO(128) | 6)
+#define PINMUX_GPIO128__FUNC_JTDO2_SEL1 (MTK_PIN_NO(128) | 7)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_MSDC1_DAT2 (MTK_PIN_NO(129) | 1)
+#define PINMUX_GPIO129__FUNC_DSI2_HSYNC (MTK_PIN_NO(129) | 2)
+#define PINMUX_GPIO129__FUNC_HFRP_JTAG0_TRSTN (MTK_PIN_NO(129) | 3)
+#define PINMUX_GPIO129__FUNC_UDI_NTRST (MTK_PIN_NO(129) | 4)
+#define PINMUX_GPIO129__FUNC_SCP_JTAG_LITTLE_TRSTN_VLP (MTK_PIN_NO(129) | 6)
+#define PINMUX_GPIO129__FUNC_JTRSTN2_SEL1 (MTK_PIN_NO(129) | 7)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_MSDC1_DAT3 (MTK_PIN_NO(130) | 1)
+#define PINMUX_GPIO130__FUNC_DSI3_HSYNC (MTK_PIN_NO(130) | 2)
+#define PINMUX_GPIO130__FUNC_CONN_BGF_DSP_L1_JINTP (MTK_PIN_NO(130) | 5)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(131) | 2)
+#define PINMUX_GPIO131__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(131) | 3)
+#define PINMUX_GPIO131__FUNC_CLKM0_A (MTK_PIN_NO(131) | 4)
+#define PINMUX_GPIO131__FUNC_CONN_BGF_DSP_L5_JDI (MTK_PIN_NO(131) | 5)
+#define PINMUX_GPIO131__FUNC_TSFDC_SCK (MTK_PIN_NO(131) | 6)
+#define PINMUX_GPIO131__FUNC_SCP_JTAG0_TDI_VCORE (MTK_PIN_NO(131) | 7)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(132) | 2)
+#define PINMUX_GPIO132__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(132) | 3)
+#define PINMUX_GPIO132__FUNC_CLKM1_B (MTK_PIN_NO(132) | 4)
+#define PINMUX_GPIO132__FUNC_CONN_BGF_DSP_L5_JMS (MTK_PIN_NO(132) | 5)
+#define PINMUX_GPIO132__FUNC_TSFDC_SDI (MTK_PIN_NO(132) | 6)
+#define PINMUX_GPIO132__FUNC_SCP_JTAG0_TMS_VCORE (MTK_PIN_NO(132) | 7)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(133) | 1)
+#define PINMUX_GPIO133__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(133) | 2)
+#define PINMUX_GPIO133__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(133) | 3)
+#define PINMUX_GPIO133__FUNC_CONN_BGF_DSP_L5_JDO (MTK_PIN_NO(133) | 5)
+#define PINMUX_GPIO133__FUNC_TSFDC_SCF (MTK_PIN_NO(133) | 6)
+#define PINMUX_GPIO133__FUNC_SCP_JTAG0_TDO_VCORE (MTK_PIN_NO(133) | 7)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(134) | 1)
+#define PINMUX_GPIO134__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(134) | 2)
+#define PINMUX_GPIO134__FUNC_TSFDC_26M (MTK_PIN_NO(134) | 6)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(135) | 1)
+#define PINMUX_GPIO135__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(135) | 2)
+#define PINMUX_GPIO135__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(135) | 3)
+#define PINMUX_GPIO135__FUNC_CONN_BGF_DSP_L5_JCK (MTK_PIN_NO(135) | 5)
+#define PINMUX_GPIO135__FUNC_TSFDC_SDO (MTK_PIN_NO(135) | 6)
+#define PINMUX_GPIO135__FUNC_SCP_JTAG0_TCK_VCORE (MTK_PIN_NO(135) | 7)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(136) | 1)
+#define PINMUX_GPIO136__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(136) | 2)
+#define PINMUX_GPIO136__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(136) | 3)
+#define PINMUX_GPIO136__FUNC_CONN_BGF_DSP_L5_JINTP (MTK_PIN_NO(136) | 5)
+#define PINMUX_GPIO136__FUNC_TSFDC_FOUT (MTK_PIN_NO(136) | 6)
+#define PINMUX_GPIO136__FUNC_SCP_JTAG0_TRSTN_VCORE (MTK_PIN_NO(136) | 7)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(137) | 1)
+#define PINMUX_GPIO137__FUNC_BPI_BUS16 (MTK_PIN_NO(137) | 2)
+#define PINMUX_GPIO137__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(137) | 4)
+#define PINMUX_GPIO137__FUNC_SPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(137) | 6)
+#define PINMUX_GPIO137__FUNC_DBG_MON_A0 (MTK_PIN_NO(137) | 7)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(138) | 1)
+#define PINMUX_GPIO138__FUNC_BPI_BUS17 (MTK_PIN_NO(138) | 2)
+#define PINMUX_GPIO138__FUNC_PCM0_LRCK (MTK_PIN_NO(138) | 4)
+#define PINMUX_GPIO138__FUNC_SPM_JTAG_TCK_VCORE (MTK_PIN_NO(138) | 6)
+#define PINMUX_GPIO138__FUNC_DBG_MON_A1 (MTK_PIN_NO(138) | 7)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(139) | 1)
+#define PINMUX_GPIO139__FUNC_BPI_BUS18 (MTK_PIN_NO(139) | 2)
+#define PINMUX_GPIO139__FUNC_MD_GPS_BLANK (MTK_PIN_NO(139) | 4)
+#define PINMUX_GPIO139__FUNC_SPM_JTAG_TMS_VCORE (MTK_PIN_NO(139) | 6)
+#define PINMUX_GPIO139__FUNC_DBG_MON_A2 (MTK_PIN_NO(139) | 7)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(140) | 1)
+#define PINMUX_GPIO140__FUNC_BPI_BUS19 (MTK_PIN_NO(140) | 2)
+#define PINMUX_GPIO140__FUNC_MD_URXD1_CONN (MTK_PIN_NO(140) | 4)
+#define PINMUX_GPIO140__FUNC_SPM_JTAG_TDO_VCORE (MTK_PIN_NO(140) | 6)
+#define PINMUX_GPIO140__FUNC_DBG_MON_A3 (MTK_PIN_NO(140) | 7)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(141) | 1)
+#define PINMUX_GPIO141__FUNC_BPI_BUS20 (MTK_PIN_NO(141) | 2)
+#define PINMUX_GPIO141__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(141) | 4)
+#define PINMUX_GPIO141__FUNC_SPM_JTAG_TDI_VCORE (MTK_PIN_NO(141) | 6)
+#define PINMUX_GPIO141__FUNC_DBG_MON_A4 (MTK_PIN_NO(141) | 7)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(142) | 1)
+#define PINMUX_GPIO142__FUNC_BPI_BUS21 (MTK_PIN_NO(142) | 2)
+#define PINMUX_GPIO142__FUNC_SSPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(142) | 6)
+#define PINMUX_GPIO142__FUNC_DBG_MON_A5 (MTK_PIN_NO(142) | 7)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_MIPI3_D_SCLK (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_BPI_BUS22 (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_TP_UTXD_GNSS_VLP (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(143) | 5)
+#define PINMUX_GPIO143__FUNC_SSPM_JTAG_TCK_VCORE (MTK_PIN_NO(143) | 6)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_MIPI3_D_SDATA (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_BPI_BUS23 (MTK_PIN_NO(144) | 2)
+#define PINMUX_GPIO144__FUNC_TP_URXD_GNSS_VLP (MTK_PIN_NO(144) | 4)
+#define PINMUX_GPIO144__FUNC_MD_URXD1_CONN (MTK_PIN_NO(144) | 5)
+#define PINMUX_GPIO144__FUNC_SSPM_JTAG_TMS_VCORE (MTK_PIN_NO(144) | 6)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_BPI_BUS0 (MTK_PIN_NO(145) | 1)
+#define PINMUX_GPIO145__FUNC_PCIE_WAKEN_1P (MTK_PIN_NO(145) | 4)
+#define PINMUX_GPIO145__FUNC_SSPM_JTAG_TDO_VCORE (MTK_PIN_NO(145) | 6)
+#define PINMUX_GPIO145__FUNC_DBG_MON_A10 (MTK_PIN_NO(145) | 7)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_BPI_BUS1 (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_PCIE_PERSTN_1P (MTK_PIN_NO(146) | 4)
+#define PINMUX_GPIO146__FUNC_SSPM_JTAG_TDI_VCORE (MTK_PIN_NO(146) | 6)
+#define PINMUX_GPIO146__FUNC_DBG_MON_A11 (MTK_PIN_NO(146) | 7)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_BPI_BUS2 (MTK_PIN_NO(147) | 1)
+#define PINMUX_GPIO147__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(147) | 2)
+#define PINMUX_GPIO147__FUNC_PCIE_CLKREQN_1P (MTK_PIN_NO(147) | 4)
+#define PINMUX_GPIO147__FUNC_SCP_JTAG_LITTLE_TRSTN_VCORE (MTK_PIN_NO(147) | 6)
+#define PINMUX_GPIO147__FUNC_DBG_MON_A12 (MTK_PIN_NO(147) | 7)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_BPI_BUS3 (MTK_PIN_NO(148) | 1)
+#define PINMUX_GPIO148__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(148) | 2)
+#define PINMUX_GPIO148__FUNC_TP_UTXD_MD_VLP (MTK_PIN_NO(148) | 4)
+#define PINMUX_GPIO148__FUNC_TP_GPIO0_AO (MTK_PIN_NO(148) | 5)
+#define PINMUX_GPIO148__FUNC_SCP_JTAG_LITTLE_TCK_VCORE (MTK_PIN_NO(148) | 6)
+#define PINMUX_GPIO148__FUNC_DBG_MON_A13 (MTK_PIN_NO(148) | 7)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_BPI_BUS4 (MTK_PIN_NO(149) | 1)
+#define PINMUX_GPIO149__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(149) | 2)
+#define PINMUX_GPIO149__FUNC_TP_URXD_MD_VLP (MTK_PIN_NO(149) | 4)
+#define PINMUX_GPIO149__FUNC_TP_GPIO1_AO (MTK_PIN_NO(149) | 5)
+#define PINMUX_GPIO149__FUNC_SCP_JTAG_LITTLE_TMS_VCORE (MTK_PIN_NO(149) | 6)
+#define PINMUX_GPIO149__FUNC_DBG_MON_A14 (MTK_PIN_NO(149) | 7)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_BPI_BUS5 (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_GPS_PPS0 (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_TP_GPIO2_AO (MTK_PIN_NO(150) | 5)
+#define PINMUX_GPIO150__FUNC_SCP_JTAG_LITTLE_TDO_VCORE (MTK_PIN_NO(150) | 6)
+#define PINMUX_GPIO150__FUNC_DBG_MON_A15 (MTK_PIN_NO(150) | 7)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_BPI_BUS6 (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_GPS_PPS1 (MTK_PIN_NO(151) | 2)
+#define PINMUX_GPIO151__FUNC_TP_GPIO3_AO (MTK_PIN_NO(151) | 5)
+#define PINMUX_GPIO151__FUNC_SCP_JTAG_LITTLE_TDI_VCORE (MTK_PIN_NO(151) | 6)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_BPI_BUS7 (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_EDP_TX_HPD (MTK_PIN_NO(152) | 2)
+#define PINMUX_GPIO152__FUNC_AGPS_SYNC (MTK_PIN_NO(152) | 5)
+#define PINMUX_GPIO152__FUNC_SSPM_UTXD_AO_VCORE (MTK_PIN_NO(152) | 6)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_TP_URTS1_VCORE (MTK_PIN_NO(153) | 6)
+#define PINMUX_GPIO153__FUNC_DBG_MON_A8 (MTK_PIN_NO(153) | 7)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_DIGRF_IRQ (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_TP_UCTS1_VCORE (MTK_PIN_NO(154) | 6)
+#define PINMUX_GPIO154__FUNC_DBG_MON_A9 (MTK_PIN_NO(154) | 7)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_MIPI_M_SCLK (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_UCTS2 (MTK_PIN_NO(155) | 4)
+#define PINMUX_GPIO155__FUNC_TP_UTXD_CONSYS_VCORE (MTK_PIN_NO(155) | 6)
+#define PINMUX_GPIO155__FUNC_DBG_MON_A6 (MTK_PIN_NO(155) | 7)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_MIPI_M_SDATA (MTK_PIN_NO(156) | 1)
+#define PINMUX_GPIO156__FUNC_URTS2 (MTK_PIN_NO(156) | 4)
+#define PINMUX_GPIO156__FUNC_TP_URXD_CONSYS_VCORE (MTK_PIN_NO(156) | 6)
+#define PINMUX_GPIO156__FUNC_DBG_MON_A7 (MTK_PIN_NO(156) | 7)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_BPI_BUS8 (MTK_PIN_NO(157) | 1)
+#define PINMUX_GPIO157__FUNC_UTXD2 (MTK_PIN_NO(157) | 4)
+#define PINMUX_GPIO157__FUNC_CLKM0_A (MTK_PIN_NO(157) | 5)
+#define PINMUX_GPIO157__FUNC_SSPM_URXD_AO_VCORE (MTK_PIN_NO(157) | 6)
+#define PINMUX_GPIO157__FUNC_DBG_MON_A16 (MTK_PIN_NO(157) | 7)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_BPI_BUS9 (MTK_PIN_NO(158) | 1)
+#define PINMUX_GPIO158__FUNC_URXD2 (MTK_PIN_NO(158) | 4)
+#define PINMUX_GPIO158__FUNC_CLKM1_A (MTK_PIN_NO(158) | 5)
+#define PINMUX_GPIO158__FUNC_TP_UTXD1_VCORE (MTK_PIN_NO(158) | 6)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_BPI_BUS10 (MTK_PIN_NO(159) | 1)
+#define PINMUX_GPIO159__FUNC_MD_INT0 (MTK_PIN_NO(159) | 2)
+#define PINMUX_GPIO159__FUNC_SRCLKENAI1 (MTK_PIN_NO(159) | 3)
+#define PINMUX_GPIO159__FUNC_CLKM2_A (MTK_PIN_NO(159) | 5)
+#define PINMUX_GPIO159__FUNC_TP_URXD1_VCORE (MTK_PIN_NO(159) | 6)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_UTXD0 (MTK_PIN_NO(160) | 1)
+#define PINMUX_GPIO160__FUNC_MD_UTXD1 (MTK_PIN_NO(160) | 2)
+#define PINMUX_GPIO160__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(160) | 5)
+#define PINMUX_GPIO160__FUNC_CONN_BG_GPS_MCU_DBG_UART_TXD (MTK_PIN_NO(160) | 6)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_URXD0 (MTK_PIN_NO(161) | 1)
+#define PINMUX_GPIO161__FUNC_MD_URXD1 (MTK_PIN_NO(161) | 2)
+#define PINMUX_GPIO161__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(161) | 5)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_UTXD1 (MTK_PIN_NO(162) | 1)
+#define PINMUX_GPIO162__FUNC_MD_UTXD0 (MTK_PIN_NO(162) | 2)
+#define PINMUX_GPIO162__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(162) | 3)
+#define PINMUX_GPIO162__FUNC_ADSP_UTXD0 (MTK_PIN_NO(162) | 4)
+#define PINMUX_GPIO162__FUNC_SSPM_UTXD_AO_VLP (MTK_PIN_NO(162) | 5)
+#define PINMUX_GPIO162__FUNC_HFRP_UTXD1 (MTK_PIN_NO(162) | 6)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_URXD1 (MTK_PIN_NO(163) | 1)
+#define PINMUX_GPIO163__FUNC_MD_URXD0 (MTK_PIN_NO(163) | 2)
+#define PINMUX_GPIO163__FUNC_TP_URXD1_VLP (MTK_PIN_NO(163) | 3)
+#define PINMUX_GPIO163__FUNC_ADSP_URXD0 (MTK_PIN_NO(163) | 4)
+#define PINMUX_GPIO163__FUNC_SSPM_URXD_AO_VLP (MTK_PIN_NO(163) | 5)
+#define PINMUX_GPIO163__FUNC_HFRP_URXD1 (MTK_PIN_NO(163) | 6)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_SCP_SCL0 (MTK_PIN_NO(164) | 1)
+#define PINMUX_GPIO164__FUNC_TP_GPIO0_AO (MTK_PIN_NO(164) | 6)
+#define PINMUX_GPIO164__FUNC_DBG_MON_A22 (MTK_PIN_NO(164) | 7)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_SCP_SDA0 (MTK_PIN_NO(165) | 1)
+#define PINMUX_GPIO165__FUNC_TP_GPIO1_AO (MTK_PIN_NO(165) | 6)
+#define PINMUX_GPIO165__FUNC_DBG_MON_A23 (MTK_PIN_NO(165) | 7)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_SCP_SCL2 (MTK_PIN_NO(166) | 1)
+#define PINMUX_GPIO166__FUNC_TP_GPIO2_AO (MTK_PIN_NO(166) | 6)
+#define PINMUX_GPIO166__FUNC_DBG_MON_A24 (MTK_PIN_NO(166) | 7)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_SCP_SDA2 (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_TP_GPIO3_AO (MTK_PIN_NO(167) | 6)
+#define PINMUX_GPIO167__FUNC_DBG_MON_A25 (MTK_PIN_NO(167) | 7)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_SCP_SPI2_CK (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_SPI2_B_CLK (MTK_PIN_NO(168) | 2)
+#define PINMUX_GPIO168__FUNC_PWM_VLP (MTK_PIN_NO(168) | 3)
+#define PINMUX_GPIO168__FUNC_SCP_SCL2 (MTK_PIN_NO(168) | 4)
+#define PINMUX_GPIO168__FUNC_DBG_MON_A26 (MTK_PIN_NO(168) | 7)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_SCP_SPI2_CS (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_SPI2_B_CSB (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_DBG_MON_A27 (MTK_PIN_NO(169) | 7)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_SCP_SPI2_MO (MTK_PIN_NO(170) | 1)
+#define PINMUX_GPIO170__FUNC_SPI2_B_MO (MTK_PIN_NO(170) | 2)
+#define PINMUX_GPIO170__FUNC_SCP_SDA2 (MTK_PIN_NO(170) | 4)
+#define PINMUX_GPIO170__FUNC_DBG_MON_A28 (MTK_PIN_NO(170) | 7)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_SCP_SPI2_MI (MTK_PIN_NO(171) | 1)
+#define PINMUX_GPIO171__FUNC_SPI2_B_MI (MTK_PIN_NO(171) | 2)
+#define PINMUX_GPIO171__FUNC_DBG_MON_A29 (MTK_PIN_NO(171) | 7)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(172) | 1)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_CMFLASH3 (MTK_PIN_NO(173) | 1)
+#define PINMUX_GPIO173__FUNC_PWM_3 (MTK_PIN_NO(173) | 2)
+#define PINMUX_GPIO173__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(173) | 3)
+#define PINMUX_GPIO173__FUNC_CLKM1_A (MTK_PIN_NO(173) | 4)
+#define PINMUX_GPIO173__FUNC_DBG_MON_A31 (MTK_PIN_NO(173) | 7)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_CMFLASH0 (MTK_PIN_NO(174) | 1)
+#define PINMUX_GPIO174__FUNC_PWM_0 (MTK_PIN_NO(174) | 2)
+#define PINMUX_GPIO174__FUNC_VBUSVALID_1P (MTK_PIN_NO(174) | 3)
+#define PINMUX_GPIO174__FUNC_MD32_2_RXD (MTK_PIN_NO(174) | 4)
+#define PINMUX_GPIO174__FUNC_DISP_PWM3 (MTK_PIN_NO(174) | 5)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_CMFLASH1 (MTK_PIN_NO(175) | 1)
+#define PINMUX_GPIO175__FUNC_PWM_1 (MTK_PIN_NO(175) | 2)
+#define PINMUX_GPIO175__FUNC_EDP_TX_HPD (MTK_PIN_NO(175) | 3)
+#define PINMUX_GPIO175__FUNC_MD32_2_TXD (MTK_PIN_NO(175) | 4)
+#define PINMUX_GPIO175__FUNC_DISP_PWM4 (MTK_PIN_NO(175) | 5)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define PINMUX_GPIO176__FUNC_SCL5 (MTK_PIN_NO(176) | 1)
+#define PINMUX_GPIO176__FUNC_LCM3_RST (MTK_PIN_NO(176) | 2)
+#define PINMUX_GPIO176__FUNC_MD_URXD1_CONN (MTK_PIN_NO(176) | 4)
+#define PINMUX_GPIO176__FUNC_TP_UTXD_GNSS_VCORE (MTK_PIN_NO(176) | 6)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define PINMUX_GPIO177__FUNC_SDA5 (MTK_PIN_NO(177) | 1)
+#define PINMUX_GPIO177__FUNC_DSI3_TE (MTK_PIN_NO(177) | 2)
+#define PINMUX_GPIO177__FUNC_MD_UTXD1_CONN (MTK_PIN_NO(177) | 4)
+#define PINMUX_GPIO177__FUNC_TP_URXD_GNSS_VCORE (MTK_PIN_NO(177) | 6)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define PINMUX_GPIO178__FUNC_DMIC_CLK (MTK_PIN_NO(178) | 1)
+#define PINMUX_GPIO178__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(178) | 2)
+#define PINMUX_GPIO178__FUNC_SRCLKENAI0 (MTK_PIN_NO(178) | 3)
+#define PINMUX_GPIO178__FUNC_CLKM2_B (MTK_PIN_NO(178) | 4)
+#define PINMUX_GPIO178__FUNC_TP_GPIO7_AO (MTK_PIN_NO(178) | 5)
+#define PINMUX_GPIO178__FUNC_SPU1_UTX (MTK_PIN_NO(178) | 6)
+#define PINMUX_GPIO178__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(178) | 7)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define PINMUX_GPIO179__FUNC_DMIC_DAT (MTK_PIN_NO(179) | 1)
+#define PINMUX_GPIO179__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(179) | 2)
+#define PINMUX_GPIO179__FUNC_SRCLKENAI1 (MTK_PIN_NO(179) | 3)
+#define PINMUX_GPIO179__FUNC_CLKM3_B (MTK_PIN_NO(179) | 4)
+#define PINMUX_GPIO179__FUNC_TP_GPIO8_AO (MTK_PIN_NO(179) | 5)
+#define PINMUX_GPIO179__FUNC_SPU1_URX (MTK_PIN_NO(179) | 6)
+#define PINMUX_GPIO179__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(179) | 7)
+
+#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define PINMUX_GPIO180__FUNC_IDDIG_1P (MTK_PIN_NO(180) | 1)
+#define PINMUX_GPIO180__FUNC_CMVREF0 (MTK_PIN_NO(180) | 2)
+#define PINMUX_GPIO180__FUNC_GPS_PPS1 (MTK_PIN_NO(180) | 3)
+#define PINMUX_GPIO180__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(180) | 4)
+#define PINMUX_GPIO180__FUNC_DISP_PWM1 (MTK_PIN_NO(180) | 5)
+
+#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define PINMUX_GPIO181__FUNC_USB_DRVVBUS_1P (MTK_PIN_NO(181) | 1)
+#define PINMUX_GPIO181__FUNC_CMVREF1 (MTK_PIN_NO(181) | 2)
+#define PINMUX_GPIO181__FUNC_MFG_EB_JTAG_TRSTN (MTK_PIN_NO(181) | 3)
+#define PINMUX_GPIO181__FUNC_ADSP_JTAG1_TRSTN (MTK_PIN_NO(181) | 4)
+#define PINMUX_GPIO181__FUNC_HFRP_JTAG1_TRSTN (MTK_PIN_NO(181) | 5)
+#define PINMUX_GPIO181__FUNC_SPU1_NTRST (MTK_PIN_NO(181) | 6)
+#define PINMUX_GPIO181__FUNC_CONN_BG_GPS_MCU_TRST_B (MTK_PIN_NO(181) | 7)
+
+#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define PINMUX_GPIO182__FUNC_SCL11 (MTK_PIN_NO(182) | 1)
+#define PINMUX_GPIO182__FUNC_CMVREF2 (MTK_PIN_NO(182) | 2)
+#define PINMUX_GPIO182__FUNC_MFG_EB_JTAG_TCK (MTK_PIN_NO(182) | 3)
+#define PINMUX_GPIO182__FUNC_ADSP_JTAG1_TCK (MTK_PIN_NO(182) | 4)
+#define PINMUX_GPIO182__FUNC_HFRP_JTAG1_TCK (MTK_PIN_NO(182) | 5)
+#define PINMUX_GPIO182__FUNC_SPU1_TCK (MTK_PIN_NO(182) | 6)
+#define PINMUX_GPIO182__FUNC_CONN_BG_GPS_MCU_TCK (MTK_PIN_NO(182) | 7)
+
+#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define PINMUX_GPIO183__FUNC_SDA11 (MTK_PIN_NO(183) | 1)
+#define PINMUX_GPIO183__FUNC_CMVREF3 (MTK_PIN_NO(183) | 2)
+#define PINMUX_GPIO183__FUNC_MFG_EB_JTAG_TMS (MTK_PIN_NO(183) | 3)
+#define PINMUX_GPIO183__FUNC_ADSP_JTAG1_TMS (MTK_PIN_NO(183) | 4)
+#define PINMUX_GPIO183__FUNC_HFRP_JTAG1_TMS (MTK_PIN_NO(183) | 5)
+#define PINMUX_GPIO183__FUNC_SPU1_TMS (MTK_PIN_NO(183) | 6)
+#define PINMUX_GPIO183__FUNC_CONN_BG_GPS_MCU_TMS (MTK_PIN_NO(183) | 7)
+
+#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define PINMUX_GPIO184__FUNC_SCL12 (MTK_PIN_NO(184) | 1)
+#define PINMUX_GPIO184__FUNC_CMVREF4 (MTK_PIN_NO(184) | 2)
+#define PINMUX_GPIO184__FUNC_MFG_EB_JTAG_TDO (MTK_PIN_NO(184) | 3)
+#define PINMUX_GPIO184__FUNC_ADSP_JTAG1_TDO (MTK_PIN_NO(184) | 4)
+#define PINMUX_GPIO184__FUNC_HFRP_JTAG1_TDO (MTK_PIN_NO(184) | 5)
+#define PINMUX_GPIO184__FUNC_SPU1_TDO (MTK_PIN_NO(184) | 6)
+#define PINMUX_GPIO184__FUNC_CONN_BG_GPS_MCU_TDO (MTK_PIN_NO(184) | 7)
+
+#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define PINMUX_GPIO185__FUNC_SDA12 (MTK_PIN_NO(185) | 1)
+#define PINMUX_GPIO185__FUNC_CMVREF5 (MTK_PIN_NO(185) | 2)
+#define PINMUX_GPIO185__FUNC_MFG_EB_JTAG_TDI (MTK_PIN_NO(185) | 3)
+#define PINMUX_GPIO185__FUNC_ADSP_JTAG1_TDI (MTK_PIN_NO(185) | 4)
+#define PINMUX_GPIO185__FUNC_HFRP_JTAG1_TDI (MTK_PIN_NO(185) | 5)
+#define PINMUX_GPIO185__FUNC_SPU1_TDI (MTK_PIN_NO(185) | 6)
+#define PINMUX_GPIO185__FUNC_CONN_BG_GPS_MCU_TDI (MTK_PIN_NO(185) | 7)
+
+#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define PINMUX_GPIO186__FUNC_MD_GPS_L1_BLANK (MTK_PIN_NO(186) | 1)
+#define PINMUX_GPIO186__FUNC_PMSR_SMAP (MTK_PIN_NO(186) | 2)
+#define PINMUX_GPIO186__FUNC_TP_GPIO2_AO (MTK_PIN_NO(186) | 3)
+
+#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define PINMUX_GPIO187__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(187) | 1)
+#define PINMUX_GPIO187__FUNC_TP_GPIO4_AO (MTK_PIN_NO(187) | 3)
+
+#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define PINMUX_GPIO188__FUNC_SCL2 (MTK_PIN_NO(188) | 1)
+#define PINMUX_GPIO188__FUNC_SCP_SCL8 (MTK_PIN_NO(188) | 2)
+
+#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define PINMUX_GPIO189__FUNC_SDA2 (MTK_PIN_NO(189) | 1)
+#define PINMUX_GPIO189__FUNC_SCP_SDA8 (MTK_PIN_NO(189) | 2)
+
+#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define PINMUX_GPIO190__FUNC_SCL4 (MTK_PIN_NO(190) | 1)
+#define PINMUX_GPIO190__FUNC_SCP_SCL9 (MTK_PIN_NO(190) | 2)
+#define PINMUX_GPIO190__FUNC_UDI_TDI_6 (MTK_PIN_NO(190) | 6)
+
+#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define PINMUX_GPIO191__FUNC_SDA4 (MTK_PIN_NO(191) | 1)
+#define PINMUX_GPIO191__FUNC_SCP_SDA9 (MTK_PIN_NO(191) | 2)
+#define PINMUX_GPIO191__FUNC_UDI_TDI_7 (MTK_PIN_NO(191) | 6)
+
+#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define PINMUX_GPIO192__FUNC_CMMCLK2 (MTK_PIN_NO(192) | 1)
+#define PINMUX_GPIO192__FUNC_MD32_3_RXD (MTK_PIN_NO(192) | 4)
+
+#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define PINMUX_GPIO193__FUNC_CLKM0_B (MTK_PIN_NO(193) | 3)
+#define PINMUX_GPIO193__FUNC_MD32_3_TXD (MTK_PIN_NO(193) | 4)
+#define PINMUX_GPIO193__FUNC_UDI_TDO_7 (MTK_PIN_NO(193) | 6)
+
+#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define PINMUX_GPIO194__FUNC_SCL7 (MTK_PIN_NO(194) | 1)
+#define PINMUX_GPIO194__FUNC_MD32_3_GPIO0 (MTK_PIN_NO(194) | 2)
+#define PINMUX_GPIO194__FUNC_CLKM2_B (MTK_PIN_NO(194) | 3)
+#define PINMUX_GPIO194__FUNC_UDI_TDI_2 (MTK_PIN_NO(194) | 6)
+
+#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define PINMUX_GPIO195__FUNC_SDA7 (MTK_PIN_NO(195) | 1)
+#define PINMUX_GPIO195__FUNC_CLKM3_B (MTK_PIN_NO(195) | 3)
+#define PINMUX_GPIO195__FUNC_UDI_TDI_3 (MTK_PIN_NO(195) | 6)
+
+#define PINMUX_GPIO196__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define PINMUX_GPIO196__FUNC_CMMCLK3 (MTK_PIN_NO(196) | 1)
+
+#define PINMUX_GPIO197__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define PINMUX_GPIO197__FUNC_CLKM1_B (MTK_PIN_NO(197) | 3)
+#define PINMUX_GPIO197__FUNC_UDI_TDI_1 (MTK_PIN_NO(197) | 6)
+
+#define PINMUX_GPIO198__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define PINMUX_GPIO198__FUNC_SCL8 (MTK_PIN_NO(198) | 1)
+#define PINMUX_GPIO198__FUNC_UDI_TDI_4 (MTK_PIN_NO(198) | 6)
+
+#define PINMUX_GPIO199__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define PINMUX_GPIO199__FUNC_SDA8 (MTK_PIN_NO(199) | 1)
+#define PINMUX_GPIO199__FUNC_UDI_TDI_5 (MTK_PIN_NO(199) | 6)
+
+#define PINMUX_GPIO200__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define PINMUX_GPIO200__FUNC_SCL1 (MTK_PIN_NO(200) | 1)
+
+#define PINMUX_GPIO201__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define PINMUX_GPIO201__FUNC_SDA1 (MTK_PIN_NO(201) | 1)
+#define PINMUX_GPIO201__FUNC_TSFDC_BG_COMP (MTK_PIN_NO(201) | 7)
+
+#define PINMUX_GPIO202__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define PINMUX_GPIO202__FUNC_SCL9 (MTK_PIN_NO(202) | 1)
+#define PINMUX_GPIO202__FUNC_SCP_SCL7 (MTK_PIN_NO(202) | 2)
+#define PINMUX_GPIO202__FUNC_TP_GPIO15_AO (MTK_PIN_NO(202) | 6)
+
+#define PINMUX_GPIO203__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define PINMUX_GPIO203__FUNC_SDA9 (MTK_PIN_NO(203) | 1)
+#define PINMUX_GPIO203__FUNC_SCP_SDA7 (MTK_PIN_NO(203) | 2)
+#define PINMUX_GPIO203__FUNC_TP_GPIO9_AO (MTK_PIN_NO(203) | 6)
+
+#define PINMUX_GPIO204__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define PINMUX_GPIO204__FUNC_SCL13 (MTK_PIN_NO(204) | 1)
+#define PINMUX_GPIO204__FUNC_CMVREF6 (MTK_PIN_NO(204) | 2)
+#define PINMUX_GPIO204__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(204) | 3)
+#define PINMUX_GPIO204__FUNC_CLKM2_B (MTK_PIN_NO(204) | 5)
+#define PINMUX_GPIO204__FUNC_TP_GPIO12_AO (MTK_PIN_NO(204) | 6)
+
+#define PINMUX_GPIO205__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define PINMUX_GPIO205__FUNC_SDA13 (MTK_PIN_NO(205) | 1)
+#define PINMUX_GPIO205__FUNC_CMVREF7 (MTK_PIN_NO(205) | 2)
+#define PINMUX_GPIO205__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(205) | 3)
+#define PINMUX_GPIO205__FUNC_CLKM3_B (MTK_PIN_NO(205) | 5)
+#define PINMUX_GPIO205__FUNC_TP_GPIO13_AO (MTK_PIN_NO(205) | 6)
+
+#define PINMUX_GPIO206__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define PINMUX_GPIO206__FUNC_MD32_2_GPIO0 (MTK_PIN_NO(206) | 2)
+#define PINMUX_GPIO206__FUNC_VBUSVALID (MTK_PIN_NO(206) | 5)
+#define PINMUX_GPIO206__FUNC_UDI_TDO_3 (MTK_PIN_NO(206) | 6)
+
+#define PINMUX_GPIO207__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define PINMUX_GPIO207__FUNC_PCIE_WAKEN_2P (MTK_PIN_NO(207) | 1)
+#define PINMUX_GPIO207__FUNC_PMSR_SMAP_MAX (MTK_PIN_NO(207) | 2)
+#define PINMUX_GPIO207__FUNC_FMI2S_A_BCK (MTK_PIN_NO(207) | 4)
+#define PINMUX_GPIO207__FUNC_UDI_TDO_4 (MTK_PIN_NO(207) | 6)
+
+#define PINMUX_GPIO208__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define PINMUX_GPIO208__FUNC_PCIE_CLKREQN_2P (MTK_PIN_NO(208) | 1)
+#define PINMUX_GPIO208__FUNC_PMSR_SMAP_MAX_W (MTK_PIN_NO(208) | 2)
+#define PINMUX_GPIO208__FUNC_FMI2S_A_LRCK (MTK_PIN_NO(208) | 4)
+#define PINMUX_GPIO208__FUNC_CLKM0_B (MTK_PIN_NO(208) | 5)
+#define PINMUX_GPIO208__FUNC_UDI_TDO_5 (MTK_PIN_NO(208) | 6)
+
+#define PINMUX_GPIO209__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define PINMUX_GPIO209__FUNC_PCIE_PERSTN_2P (MTK_PIN_NO(209) | 1)
+#define PINMUX_GPIO209__FUNC_PMSR_SMAP (MTK_PIN_NO(209) | 2)
+#define PINMUX_GPIO209__FUNC_FMI2S_A_DI (MTK_PIN_NO(209) | 4)
+#define PINMUX_GPIO209__FUNC_CLKM1_B (MTK_PIN_NO(209) | 5)
+#define PINMUX_GPIO209__FUNC_UDI_TDO_6 (MTK_PIN_NO(209) | 6)
+
+#define PINMUX_GPIO210__FUNC_GPIO210 (MTK_PIN_NO(210) | 0)
+#define PINMUX_GPIO210__FUNC_CMMCLK4 (MTK_PIN_NO(210) | 1)
+
+#define PINMUX_GPIO211__FUNC_GPIO211 (MTK_PIN_NO(211) | 0)
+#define PINMUX_GPIO211__FUNC_CMMCLK5 (MTK_PIN_NO(211) | 1)
+#define PINMUX_GPIO211__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(211) | 2)
+
+#define PINMUX_GPIO212__FUNC_GPIO212 (MTK_PIN_NO(212) | 0)
+#define PINMUX_GPIO212__FUNC_CMMCLK6 (MTK_PIN_NO(212) | 1)
+#define PINMUX_GPIO212__FUNC_TP_GPIO10_AO (MTK_PIN_NO(212) | 2)
+#define PINMUX_GPIO212__FUNC_IDDIG (MTK_PIN_NO(212) | 5)
+#define PINMUX_GPIO212__FUNC_UDI_TDO_1 (MTK_PIN_NO(212) | 6)
+
+#define PINMUX_GPIO213__FUNC_GPIO213 (MTK_PIN_NO(213) | 0)
+#define PINMUX_GPIO213__FUNC_CMMCLK7 (MTK_PIN_NO(213) | 1)
+#define PINMUX_GPIO213__FUNC_TP_GPIO11_AO (MTK_PIN_NO(213) | 2)
+#define PINMUX_GPIO213__FUNC_USB_DRVVBUS (MTK_PIN_NO(213) | 5)
+#define PINMUX_GPIO213__FUNC_UDI_TDO_2 (MTK_PIN_NO(213) | 6)
+
+#define PINMUX_GPIO214__FUNC_GPIO214 (MTK_PIN_NO(214) | 0)
+#define PINMUX_GPIO214__FUNC_SCP_SCL3 (MTK_PIN_NO(214) | 1)
+#define PINMUX_GPIO214__FUNC_SDA14_E1 (MTK_PIN_NO(214) | 2)
+#define PINMUX_GPIO214__FUNC_SCL14_E2 (MTK_PIN_NO(214) | 2)
+#define PINMUX_GPIO214__FUNC_GBE1_MDC (MTK_PIN_NO(214) | 6)
+#define PINMUX_GPIO214__FUNC_GBE0_MDC (MTK_PIN_NO(214) | 7)
+
+#define PINMUX_GPIO215__FUNC_GPIO215 (MTK_PIN_NO(215) | 0)
+#define PINMUX_GPIO215__FUNC_SCP_SDA3 (MTK_PIN_NO(215) | 1)
+#define PINMUX_GPIO215__FUNC_SCL14_E1 (MTK_PIN_NO(215) | 2)
+#define PINMUX_GPIO215__FUNC_SDA14_E2 (MTK_PIN_NO(215) | 2)
+#define PINMUX_GPIO215__FUNC_GBE1_MDIO (MTK_PIN_NO(215) | 6)
+#define PINMUX_GPIO215__FUNC_GBE0_MDIO (MTK_PIN_NO(215) | 7)
+
+#define PINMUX_GPIO216__FUNC_GPIO216 (MTK_PIN_NO(216) | 0)
+#define PINMUX_GPIO216__FUNC_GPS_PPS0 (MTK_PIN_NO(216) | 1)
+
+#define PINMUX_GPIO217__FUNC_GPIO217 (MTK_PIN_NO(217) | 0)
+#define PINMUX_GPIO217__FUNC_KPROW0 (MTK_PIN_NO(217) | 1)
+#define PINMUX_GPIO217__FUNC_TP_GPIO12_AO (MTK_PIN_NO(217) | 6)
+
+#define PINMUX_GPIO218__FUNC_GPIO218 (MTK_PIN_NO(218) | 0)
+#define PINMUX_GPIO218__FUNC_KPROW1 (MTK_PIN_NO(218) | 1)
+#define PINMUX_GPIO218__FUNC_SPI0_WP (MTK_PIN_NO(218) | 2)
+#define PINMUX_GPIO218__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(218) | 3)
+#define PINMUX_GPIO218__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(218) | 5)
+#define PINMUX_GPIO218__FUNC_TP_GPIO14_AO (MTK_PIN_NO(218) | 6)
+
+#define PINMUX_GPIO219__FUNC_GPIO219 (MTK_PIN_NO(219) | 0)
+#define PINMUX_GPIO219__FUNC_KPCOL1 (MTK_PIN_NO(219) | 1)
+#define PINMUX_GPIO219__FUNC_SPI0_HOLD (MTK_PIN_NO(219) | 2)
+#define PINMUX_GPIO219__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(219) | 3)
+#define PINMUX_GPIO219__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(219) | 4)
+#define PINMUX_GPIO219__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(219) | 5)
+#define PINMUX_GPIO219__FUNC_SPM_JTAG_TRSTN_VLP (MTK_PIN_NO(219) | 6)
+#define PINMUX_GPIO219__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(219) | 7)
+
+#define PINMUX_GPIO220__FUNC_GPIO220 (MTK_PIN_NO(220) | 0)
+#define PINMUX_GPIO220__FUNC_SPI0_CLK (MTK_PIN_NO(220) | 1)
+#define PINMUX_GPIO220__FUNC_SPM_JTAG_TCK_VLP (MTK_PIN_NO(220) | 6)
+#define PINMUX_GPIO220__FUNC_JTCK_SEL1 (MTK_PIN_NO(220) | 7)
+
+#define PINMUX_GPIO221__FUNC_GPIO221 (MTK_PIN_NO(221) | 0)
+#define PINMUX_GPIO221__FUNC_SPI0_CSB (MTK_PIN_NO(221) | 1)
+#define PINMUX_GPIO221__FUNC_SPM_JTAG_TMS_VLP (MTK_PIN_NO(221) | 6)
+#define PINMUX_GPIO221__FUNC_JTMS_SEL1 (MTK_PIN_NO(221) | 7)
+
+#define PINMUX_GPIO222__FUNC_GPIO222 (MTK_PIN_NO(222) | 0)
+#define PINMUX_GPIO222__FUNC_SPI0_MO (MTK_PIN_NO(222) | 1)
+#define PINMUX_GPIO222__FUNC_SCP_SCL7 (MTK_PIN_NO(222) | 2)
+#define PINMUX_GPIO222__FUNC_SPM_JTAG_TDO_VLP (MTK_PIN_NO(222) | 6)
+#define PINMUX_GPIO222__FUNC_JTDO_SEL1 (MTK_PIN_NO(222) | 7)
+
+#define PINMUX_GPIO223__FUNC_GPIO223 (MTK_PIN_NO(223) | 0)
+#define PINMUX_GPIO223__FUNC_SPI0_MI (MTK_PIN_NO(223) | 1)
+#define PINMUX_GPIO223__FUNC_SCP_SDA7 (MTK_PIN_NO(223) | 2)
+#define PINMUX_GPIO223__FUNC_SPM_JTAG_TDI_VLP (MTK_PIN_NO(223) | 6)
+#define PINMUX_GPIO223__FUNC_JTDI_SEL1 (MTK_PIN_NO(223) | 7)
+
+#define PINMUX_GPIO224__FUNC_GPIO224 (MTK_PIN_NO(224) | 0)
+#define PINMUX_GPIO224__FUNC_MSDC2_CLK (MTK_PIN_NO(224) | 1)
+#define PINMUX_GPIO224__FUNC_DMIC2_CLK (MTK_PIN_NO(224) | 2)
+#define PINMUX_GPIO224__FUNC_GBE0_AUX_PPS0 (MTK_PIN_NO(224) | 3)
+#define PINMUX_GPIO224__FUNC_GBE0_TXER (MTK_PIN_NO(224) | 4)
+#define PINMUX_GPIO224__FUNC_GBE1_TXER (MTK_PIN_NO(224) | 5)
+#define PINMUX_GPIO224__FUNC_GBE1_AUX_PPS0 (MTK_PIN_NO(224) | 6)
+#define PINMUX_GPIO224__FUNC_MD32_1_TXD (MTK_PIN_NO(224) | 7)
+
+#define PINMUX_GPIO225__FUNC_GPIO225 (MTK_PIN_NO(225) | 0)
+#define PINMUX_GPIO225__FUNC_MSDC2_CMD (MTK_PIN_NO(225) | 1)
+#define PINMUX_GPIO225__FUNC_DMIC2_DAT (MTK_PIN_NO(225) | 2)
+#define PINMUX_GPIO225__FUNC_GBE0_AUX_PPS1 (MTK_PIN_NO(225) | 3)
+#define PINMUX_GPIO225__FUNC_GBE0_RXER (MTK_PIN_NO(225) | 4)
+#define PINMUX_GPIO225__FUNC_GBE1_RXER (MTK_PIN_NO(225) | 5)
+#define PINMUX_GPIO225__FUNC_GBE1_AUX_PPS1 (MTK_PIN_NO(225) | 6)
+#define PINMUX_GPIO225__FUNC_MD32_1_RXD (MTK_PIN_NO(225) | 7)
+
+#define PINMUX_GPIO226__FUNC_GPIO226 (MTK_PIN_NO(226) | 0)
+#define PINMUX_GPIO226__FUNC_MSDC2_DAT0 (MTK_PIN_NO(226) | 1)
+#define PINMUX_GPIO226__FUNC_I2SIN3_BCK (MTK_PIN_NO(226) | 2)
+#define PINMUX_GPIO226__FUNC_GBE0_AUX_PPS2 (MTK_PIN_NO(226) | 3)
+#define PINMUX_GPIO226__FUNC_GBE0_COL (MTK_PIN_NO(226) | 4)
+#define PINMUX_GPIO226__FUNC_GBE1_COL (MTK_PIN_NO(226) | 5)
+#define PINMUX_GPIO226__FUNC_GBE1_AUX_PPS2 (MTK_PIN_NO(226) | 6)
+#define PINMUX_GPIO226__FUNC_GBE1_MDC (MTK_PIN_NO(226) | 7)
+
+#define PINMUX_GPIO227__FUNC_GPIO227 (MTK_PIN_NO(227) | 0)
+#define PINMUX_GPIO227__FUNC_MSDC2_DAT1 (MTK_PIN_NO(227) | 1)
+#define PINMUX_GPIO227__FUNC_I2SIN3_LRCK (MTK_PIN_NO(227) | 2)
+#define PINMUX_GPIO227__FUNC_GBE0_AUX_PPS3 (MTK_PIN_NO(227) | 3)
+#define PINMUX_GPIO227__FUNC_GBE0_INTR (MTK_PIN_NO(227) | 4)
+#define PINMUX_GPIO227__FUNC_GBE1_INTR (MTK_PIN_NO(227) | 5)
+#define PINMUX_GPIO227__FUNC_GBE1_AUX_PPS3 (MTK_PIN_NO(227) | 6)
+#define PINMUX_GPIO227__FUNC_GBE1_MDIO (MTK_PIN_NO(227) | 7)
+
+#define PINMUX_GPIO228__FUNC_GPIO228 (MTK_PIN_NO(228) | 0)
+#define PINMUX_GPIO228__FUNC_MSDC2_DAT2 (MTK_PIN_NO(228) | 1)
+#define PINMUX_GPIO228__FUNC_I2SIN3_DI (MTK_PIN_NO(228) | 2)
+#define PINMUX_GPIO228__FUNC_GBE0_MDC (MTK_PIN_NO(228) | 3)
+#define PINMUX_GPIO228__FUNC_GBE1_MDC (MTK_PIN_NO(228) | 4)
+#define PINMUX_GPIO228__FUNC_CONN_BG_GPS_MCU_AICE_TCKC (MTK_PIN_NO(228) | 5)
+
+#define PINMUX_GPIO229__FUNC_GPIO229 (MTK_PIN_NO(229) | 0)
+#define PINMUX_GPIO229__FUNC_MSDC2_DAT3 (MTK_PIN_NO(229) | 1)
+#define PINMUX_GPIO229__FUNC_I2SOUT3_DO (MTK_PIN_NO(229) | 2)
+#define PINMUX_GPIO229__FUNC_GBE0_MDIO (MTK_PIN_NO(229) | 3)
+#define PINMUX_GPIO229__FUNC_GBE1_MDIO (MTK_PIN_NO(229) | 4)
+#define PINMUX_GPIO229__FUNC_CONN_BG_GPS_MCU_AICE_TMSC (MTK_PIN_NO(229) | 5)
+#define PINMUX_GPIO229__FUNC_AVB_CLK2 (MTK_PIN_NO(229) | 7)
+
+#define PINMUX_GPIO230__FUNC_GPIO230 (MTK_PIN_NO(230) | 0)
+#define PINMUX_GPIO230__FUNC_CONN_TOP_CLK (MTK_PIN_NO(230) | 1)
+
+#define PINMUX_GPIO231__FUNC_GPIO231 (MTK_PIN_NO(231) | 0)
+#define PINMUX_GPIO231__FUNC_CONN_TOP_DATA (MTK_PIN_NO(231) | 1)
+
+#define PINMUX_GPIO232__FUNC_GPIO232 (MTK_PIN_NO(232) | 0)
+#define PINMUX_GPIO232__FUNC_CONN_HRST_B (MTK_PIN_NO(232) | 1)
+
+#define PINMUX_GPIO233__FUNC_GPIO233 (MTK_PIN_NO(233) | 0)
+#define PINMUX_GPIO233__FUNC_I2SIN0_BCK (MTK_PIN_NO(233) | 1)
+
+#define PINMUX_GPIO234__FUNC_GPIO234 (MTK_PIN_NO(234) | 0)
+#define PINMUX_GPIO234__FUNC_I2SIN0_LRCK (MTK_PIN_NO(234) | 1)
+
+#define PINMUX_GPIO235__FUNC_GPIO235 (MTK_PIN_NO(235) | 0)
+#define PINMUX_GPIO235__FUNC_I2SIN0_DI (MTK_PIN_NO(235) | 1)
+
+#define PINMUX_GPIO236__FUNC_GPIO236 (MTK_PIN_NO(236) | 0)
+#define PINMUX_GPIO236__FUNC_I2SOUT0_DO (MTK_PIN_NO(236) | 1)
+
+#define PINMUX_GPIO237__FUNC_GPIO237 (MTK_PIN_NO(237) | 0)
+#define PINMUX_GPIO237__FUNC_CONN_UARTHUB_UART_TX (MTK_PIN_NO(237) | 1)
+#define PINMUX_GPIO237__FUNC_UTXD3 (MTK_PIN_NO(237) | 3)
+
+#define PINMUX_GPIO238__FUNC_GPIO238 (MTK_PIN_NO(238) | 0)
+#define PINMUX_GPIO238__FUNC_CONN_UARTHUB_UART_RX (MTK_PIN_NO(238) | 1)
+#define PINMUX_GPIO238__FUNC_URXD3 (MTK_PIN_NO(238) | 3)
+
+#define PINMUX_GPIO239__FUNC_GPIO239 (MTK_PIN_NO(239) | 0)
+#define PINMUX_GPIO239__FUNC_TP_UTXD_CONSYS_VLP (MTK_PIN_NO(239) | 1)
+#define PINMUX_GPIO239__FUNC_TP_URXD_CONSYS_VLP (MTK_PIN_NO(239) | 2)
+
+#define PINMUX_GPIO240__FUNC_GPIO240 (MTK_PIN_NO(240) | 0)
+#define PINMUX_GPIO240__FUNC_TP_URXD_CONSYS_VLP (MTK_PIN_NO(240) | 1)
+#define PINMUX_GPIO240__FUNC_TP_UTXD_CONSYS_VLP (MTK_PIN_NO(240) | 2)
+
+#define PINMUX_GPIO241__FUNC_GPIO241 (MTK_PIN_NO(241) | 0)
+#define PINMUX_GPIO241__FUNC_PCIE_PERSTN (MTK_PIN_NO(241) | 1)
+
+#define PINMUX_GPIO242__FUNC_GPIO242 (MTK_PIN_NO(242) | 0)
+#define PINMUX_GPIO242__FUNC_PCIE_WAKEN (MTK_PIN_NO(242) | 1)
+
+#define PINMUX_GPIO243__FUNC_GPIO243 (MTK_PIN_NO(243) | 0)
+#define PINMUX_GPIO243__FUNC_PCIE_CLKREQN (MTK_PIN_NO(243) | 1)
+
+#define PINMUX_GPIO244__FUNC_GPIO244 (MTK_PIN_NO(244) | 0)
+#define PINMUX_GPIO244__FUNC_CONN_RST (MTK_PIN_NO(244) | 1)
+
+#define PINMUX_GPIO245__FUNC_GPIO245 (MTK_PIN_NO(245) | 0)
+
+#define PINMUX_GPIO246__FUNC_GPIO246 (MTK_PIN_NO(246) | 0)
+#define PINMUX_GPIO246__FUNC_CONN_PTA_TXD0 (MTK_PIN_NO(246) | 1)
+
+#define PINMUX_GPIO247__FUNC_GPIO247 (MTK_PIN_NO(247) | 0)
+#define PINMUX_GPIO247__FUNC_CONN_PTA_RXD0 (MTK_PIN_NO(247) | 1)
+
+#define PINMUX_GPIO248__FUNC_GPIO248 (MTK_PIN_NO(248) | 0)
+#define PINMUX_GPIO248__FUNC_UCTS3 (MTK_PIN_NO(248) | 3)
+
+#define PINMUX_GPIO249__FUNC_GPIO249 (MTK_PIN_NO(249) | 0)
+#define PINMUX_GPIO249__FUNC_URTS3 (MTK_PIN_NO(249) | 3)
+
+#define PINMUX_GPIO250__FUNC_GPIO250 (MTK_PIN_NO(250) | 0)
+
+#define PINMUX_GPIO251__FUNC_GPIO251 (MTK_PIN_NO(251) | 0)
+#define PINMUX_GPIO251__FUNC_IDDIG_1P (MTK_PIN_NO(251) | 1)
+
+#define PINMUX_GPIO252__FUNC_GPIO252 (MTK_PIN_NO(252) | 0)
+#define PINMUX_GPIO252__FUNC_USB_DRVVBUS_1P (MTK_PIN_NO(252) | 1)
+
+#define PINMUX_GPIO253__FUNC_GPIO253 (MTK_PIN_NO(253) | 0)
+#define PINMUX_GPIO253__FUNC_VBUSVALID_1P (MTK_PIN_NO(253) | 1)
+
+#define PINMUX_GPIO254__FUNC_GPIO254 (MTK_PIN_NO(254) | 0)
+#define PINMUX_GPIO254__FUNC_IDDIG_2P (MTK_PIN_NO(254) | 1)
+
+#define PINMUX_GPIO255__FUNC_GPIO255 (MTK_PIN_NO(255) | 0)
+#define PINMUX_GPIO255__FUNC_USB_DRVVBUS_2P (MTK_PIN_NO(255) | 1)
+
+#define PINMUX_GPIO256__FUNC_GPIO256 (MTK_PIN_NO(256) | 0)
+#define PINMUX_GPIO256__FUNC_VBUSVALID_2P (MTK_PIN_NO(256) | 1)
+
+#define PINMUX_GPIO257__FUNC_GPIO257 (MTK_PIN_NO(257) | 0)
+#define PINMUX_GPIO257__FUNC_VBUSVALID_3P (MTK_PIN_NO(257) | 1)
+
+#define PINMUX_GPIO258__FUNC_GPIO258 (MTK_PIN_NO(258) | 0)
+#define PINMUX_GPIO258__FUNC_AVB_CLK1 (MTK_PIN_NO(258) | 7)
+
+#define PINMUX_GPIO259__FUNC_GPIO259 (MTK_PIN_NO(259) | 0)
+#define PINMUX_GPIO259__FUNC_GBE0_TXD0 (MTK_PIN_NO(259) | 1)
+#define PINMUX_GPIO259__FUNC_GBE1_TXD0 (MTK_PIN_NO(259) | 2)
+
+#define PINMUX_GPIO260__FUNC_GPIO260 (MTK_PIN_NO(260) | 0)
+#define PINMUX_GPIO260__FUNC_GBE0_TXD1 (MTK_PIN_NO(260) | 1)
+#define PINMUX_GPIO260__FUNC_GBE1_TXD1 (MTK_PIN_NO(260) | 2)
+
+#define PINMUX_GPIO261__FUNC_GPIO261 (MTK_PIN_NO(261) | 0)
+#define PINMUX_GPIO261__FUNC_GBE0_TXC (MTK_PIN_NO(261) | 1)
+#define PINMUX_GPIO261__FUNC_GBE1_TXC (MTK_PIN_NO(261) | 2)
+
+#define PINMUX_GPIO262__FUNC_GPIO262 (MTK_PIN_NO(262) | 0)
+#define PINMUX_GPIO262__FUNC_GBE0_TXEN (MTK_PIN_NO(262) | 1)
+#define PINMUX_GPIO262__FUNC_GBE1_TXEN (MTK_PIN_NO(262) | 2)
+
+#define PINMUX_GPIO263__FUNC_GPIO263 (MTK_PIN_NO(263) | 0)
+#define PINMUX_GPIO263__FUNC_GBE0_RXD0 (MTK_PIN_NO(263) | 1)
+#define PINMUX_GPIO263__FUNC_GBE1_RXD0 (MTK_PIN_NO(263) | 2)
+#define PINMUX_GPIO263__FUNC_GBE0_AUX_PPS0 (MTK_PIN_NO(263) | 3)
+
+#define PINMUX_GPIO264__FUNC_GPIO264 (MTK_PIN_NO(264) | 0)
+#define PINMUX_GPIO264__FUNC_GBE0_RXD1 (MTK_PIN_NO(264) | 1)
+#define PINMUX_GPIO264__FUNC_GBE1_RXD1 (MTK_PIN_NO(264) | 2)
+#define PINMUX_GPIO264__FUNC_GBE0_AUX_PPS1 (MTK_PIN_NO(264) | 3)
+
+#define PINMUX_GPIO265__FUNC_GPIO265 (MTK_PIN_NO(265) | 0)
+#define PINMUX_GPIO265__FUNC_GBE0_RXC (MTK_PIN_NO(265) | 1)
+#define PINMUX_GPIO265__FUNC_GBE1_RXC (MTK_PIN_NO(265) | 2)
+#define PINMUX_GPIO265__FUNC_GBE0_AUX_PPS2 (MTK_PIN_NO(265) | 3)
+
+#define PINMUX_GPIO266__FUNC_GPIO266 (MTK_PIN_NO(266) | 0)
+#define PINMUX_GPIO266__FUNC_GBE0_RXDV (MTK_PIN_NO(266) | 1)
+#define PINMUX_GPIO266__FUNC_GBE1_RXDV (MTK_PIN_NO(266) | 2)
+#define PINMUX_GPIO266__FUNC_GBE0_AUX_PPS3 (MTK_PIN_NO(266) | 3)
+
+#define PINMUX_GPIO267__FUNC_GPIO267 (MTK_PIN_NO(267) | 0)
+#define PINMUX_GPIO267__FUNC_GBE0_TXD2 (MTK_PIN_NO(267) | 1)
+#define PINMUX_GPIO267__FUNC_GBE1_TXD2 (MTK_PIN_NO(267) | 2)
+#define PINMUX_GPIO267__FUNC_GBE0_RXER (MTK_PIN_NO(267) | 3)
+#define PINMUX_GPIO267__FUNC_GBE1_RXER (MTK_PIN_NO(267) | 4)
+
+#define PINMUX_GPIO268__FUNC_GPIO268 (MTK_PIN_NO(268) | 0)
+#define PINMUX_GPIO268__FUNC_GBE0_TXD3 (MTK_PIN_NO(268) | 1)
+#define PINMUX_GPIO268__FUNC_GBE1_TXD3 (MTK_PIN_NO(268) | 2)
+
+#define PINMUX_GPIO269__FUNC_GPIO269 (MTK_PIN_NO(269) | 0)
+#define PINMUX_GPIO269__FUNC_GBE0_RXD2 (MTK_PIN_NO(269) | 1)
+#define PINMUX_GPIO269__FUNC_GBE1_RXD2 (MTK_PIN_NO(269) | 2)
+#define PINMUX_GPIO269__FUNC_GBE0_MDC (MTK_PIN_NO(269) | 3)
+
+#define PINMUX_GPIO270__FUNC_GPIO270 (MTK_PIN_NO(270) | 0)
+#define PINMUX_GPIO270__FUNC_GBE0_RXD3 (MTK_PIN_NO(270) | 1)
+#define PINMUX_GPIO270__FUNC_GBE1_RXD3 (MTK_PIN_NO(270) | 2)
+#define PINMUX_GPIO270__FUNC_GBE0_MDIO (MTK_PIN_NO(270) | 3)
+
+#endif /* __MT8196_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
index 7d90112a7e27..b5dd5ef9fa11 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -21,12 +21,28 @@
 
 	aliases {
 		serial0 = &uart0;
+		ethernet = &ethernet;
 	};
 
 	chosen {
 		stdout-path = "serial0:921600n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_connector_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
+
 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
@@ -62,6 +78,21 @@
 		enable-active-high;
 	};
 
+	reg_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	touch0_fixed_3v3: regulator-vio33tp {
+		compatible = "regulator-fixed";
+		regulator-name = "vio33_tp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vsys>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -104,6 +135,16 @@
 		pinctrl-5 = <&aud_mosi_on_pins>;
 		mediatek,platform = <&afe>;
 	};
+
+	vsys_lcm_reg: regulator-vsys-lcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vsys_lcm";
+	};
+
 };
 
 &afe {
@@ -131,13 +172,102 @@
 	sram-supply = <&mt6357_vsram_proc_reg>;
 };
 
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&dpi0 {
+	pinctrl-0 = <&dpi_default_pins>;
+	pinctrl-1 = <&dpi_idle_pins>;
+	pinctrl-names = "default", "sleep";
+	/*
+	 * Ethernet and HDMI (DPI0) are sharing pins.
+	 * Only one can be enabled at a time and require the physical switch
+	 * SW2101 to be set on LAN position
+	 */
+	status = "disabled";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			dpi0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&rdma1_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			dpi0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&it66121_in>;
+			};
+		};
+	};
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid015";
+		reg = <0>;
+		enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&mt6357_vsim1_reg>;
+		power-supply = <&vsys_lcm_reg>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			panel_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			dsi0_in: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			dsi0_out: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
 &ethernet {
 	pinctrl-0 = <&ethernet_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&eth_phy>;
 	phy-mode = "rmii";
 	/*
-	 * Ethernet and HDMI (DSI0) are sharing pins.
+	 * Ethernet and HDMI (DPI0) are sharing pins.
 	 * Only one can be enabled at a time and require the physical switch
 	 * SW2101 to be set on LAN position
 	 * mt6357_vibr_reg and mt6357_vsim2_reg are needed to supply ethernet
@@ -154,6 +284,11 @@
 	};
 };
 
+&gpu {
+	mali-supply = <&mt6357_vcore_reg>;
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <100000>;
 	pinctrl-0 = <&i2c0_pins>;
@@ -161,6 +296,72 @@
 	status = "okay";
 };
 
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-div = <2>;
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	it66121_hdmi: hdmi@4c {
+		compatible = "ite,it66121";
+		reg = <0x4c>;
+		#sound-dai-cells = <0>;
+		interrupt-parent = <&pio>;
+		interrupts = <68 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&ite_pins>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 69 GPIO_ACTIVE_LOW>;
+		vcn18-supply = <&mt6357_vsim2_reg>;
+		vcn33-supply = <&mt6357_vibr_reg>;
+		vrf12-supply = <&mt6357_vrf12_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				it66121_in: endpoint@0 {
+					reg = <0>;
+					bus-width = <12>;
+					remote-endpoint = <&dpi0_out>;
+				};
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+				hdmi_connector_out: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 78 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+		irq-gpios = <&pio 78 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 79 GPIO_ACTIVE_LOW>;
+		AVDD28-supply = <&touch0_fixed_3v3>;
+		VDDIO-supply = <&mt6357_vrf12_reg>;
+	};
+};
+
+&mfg {
+	domain-supply = <&mt6357_vsram_others_reg>;
+};
+
 &mmc0 {
 	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
 	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
@@ -205,6 +406,11 @@
 	mediatek,micbias1-microvolt = <1700000>;
 };
 
+&mt6357_vsim1_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
 &pio {
 	aud_default_pins: audiodefault-pins {
 		clk-dat-pins {
@@ -267,6 +473,49 @@
 		};
 	};
 
+	dpi_default_pins: dpi-default-pins {
+		pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>,
+				 <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>,
+				 <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>,
+				 <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>,
+				 <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>,
+				 <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>,
+				 <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>,
+				 <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>,
+				 <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>,
+				 <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>,
+				 <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>,
+				 <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>;
+			drive-strength = <4>;
+		};
+	};
+
+	dpi_idle_pins: dpi-idle-pins {
+		pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_GPIO1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_GPIO2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_GPIO3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_GPIO4>,
+				 <MT8365_PIN_5_GPIO5__FUNC_GPIO5>,
+				 <MT8365_PIN_6_GPIO6__FUNC_GPIO6>,
+				 <MT8365_PIN_7_GPIO7__FUNC_GPIO7>,
+				 <MT8365_PIN_8_GPIO8__FUNC_GPIO8>,
+				 <MT8365_PIN_9_GPIO9__FUNC_GPIO9>,
+				 <MT8365_PIN_10_GPIO10__FUNC_GPIO10>,
+				 <MT8365_PIN_11_GPIO11__FUNC_GPIO11>,
+				 <MT8365_PIN_12_GPIO12__FUNC_GPIO12>,
+				 <MT8365_PIN_13_GPIO13__FUNC_GPIO13>,
+				 <MT8365_PIN_14_GPIO14__FUNC_GPIO14>,
+				 <MT8365_PIN_15_GPIO15__FUNC_GPIO15>;
+		};
+	};
+
 	ethernet_pins: ethernet-pins {
 		phy_reset_pins {
 			pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>;
@@ -308,6 +557,33 @@
 		};
 	};
 
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>,
+				 <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
+			bias-pull-up;
+		};
+	};
+
+	ite_pins: ite-pins {
+		irq_ite_pins {
+			pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pwr_pins {
+			pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>,
+				 <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>;
+			output-high;
+		};
+
+		rst_ite_pins {
+			pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>;
+			output-high;
+		};
+	};
+
 	mmc0_default_pins: mmc0-default-pins {
 		clk-pins {
 			pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
@@ -410,6 +686,19 @@
 		};
 	};
 
+	touch_pins: touch-pins {
+		ctp-int1-pins {
+			pinmux = <MT8365_PIN_78_CMHSYNC__FUNC_GPIO78>;
+			input-enable;
+			bias-disable;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_79_CMVSYNC__FUNC_GPIO79>;
+			output-low;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins {
 			pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
@@ -463,6 +752,10 @@
 	status = "okay";
 };
 
+&rdma1_out {
+	remote-endpoint = <&dpi0_in>;
+};
+
 &ssusb {
 	dr_mode = "otg";
 	maximum-speed = "high-speed";
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 9c91fe8ea0f9..a5ca3cda6ef3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/mediatek,mt8365-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mediatek,mt8365-power.h>
 
@@ -19,6 +20,19 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		aal0 = &aal0;
+		ccorr0 = &ccorr0;
+		color0 = &color0;
+		dither0 = &dither0;
+		dpi0 = &dpi0;
+		dsi0 = &dsi0;
+		gamma0 = &gamma0;
+		ovl0 = &ovl0;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -253,6 +267,26 @@
 		clock-output-names = "clk26m";
 	};
 
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-450000000 {
+			opp-hz = /bits/ 64 <450000000>;
+			opp-microvolt = <650000>;
+		};
+
+		opp-560000000 {
+			opp-hz = /bits/ 64 <560000000>;
+			opp-microvolt = <700000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <800000>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -278,6 +312,27 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		mfgcfg: syscon@13000000 {
+			compatible = "mediatek,mt8365-mfgcfg", "syscon";
+			reg = <0 0x13000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		gpu: gpu@13040000 {
+			compatible = "mediatek,mt8365-mali", "arm,mali-bifrost";
+			reg = <0 0x13040000 0 0x4000>;
+
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "job", "mmu", "gpu", "event";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MFG>;
+			status = "disabled";
+		};
+
 		topckgen: syscon@10000000 {
 			compatible = "mediatek,mt8365-topckgen", "syscon";
 			reg = <0 0x10000000 0 0x1000>;
@@ -384,7 +439,7 @@
 					mediatek,infracfg = <&infracfg>;
 				};
 
-				power-domain@MT8365_POWER_DOMAIN_MFG {
+				mfg: power-domain@MT8365_POWER_DOMAIN_MFG {
 					reg = <MT8365_POWER_DOMAIN_MFG>;
 					clocks = <&topckgen CLK_TOP_MFG_SEL>;
 					clock-names = "mfg";
@@ -449,7 +504,8 @@
 		};
 
 		keypad: keypad@10010000 {
-			compatible = "mediatek,mt6779-keypad";
+			compatible = "mediatek,mt8365-keypad",
+				     "mediatek,mt6779-keypad";
 			reg = <0 0x10010000 0 0x1000>;
 			wakeup-source;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
@@ -608,6 +664,15 @@
 			status = "disabled";
 		};
 
+		disp_pwm: pwm@1100e000 {
+			compatible = "mediatek,mt8365-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			clock-names = "main", "mm";
+			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>, <&infracfg CLK_IFR_DISP_PWM>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			#pwm-cells = <2>;
+		};
+
 		i2c3: i2c@1100f000 {
 			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
 			reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
@@ -704,6 +769,15 @@
 			status = "disabled";
 		};
 
+		mipi_tx0: dsi-phy@11c00000 {
+			compatible = "mediatek,mt8365-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c00000 0 0x800>;
+			clock-output-names = "mipi_tx0_pll";
+			clocks = <&clk26m>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+		};
+
 		u3phy: t-phy@11cc0000 {
 			compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
 			#address-cells = <1>;
@@ -731,6 +805,26 @@
 			compatible = "mediatek,mt8365-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mmsys_main: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&ovl0_in>;
+				};
+				mmsys_ext: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&rdma1_in>;
+				};
+			};
+		};
+
+		mutex: mutex@14001000 {
+			compatible =  "mediatek,mt8365-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
 		};
 
 		smi_common: smi@14002000 {
@@ -756,6 +850,290 @@
 			mediatek,larb-id = <0>;
 		};
 
+		ovl0: ovl@1400b000 {
+			compatible = "mediatek,mt8365-disp-ovl", "mediatek,mt8192-disp-ovl";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_OVL0>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					ovl0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mmsys_main>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					ovl0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
+		};
+
+		rdma0: rdma@1400d000 {
+			compatible = "mediatek,mt8365-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1400d000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_RDMA0>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,rdma-fifo-size = <5120>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					rdma0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					rdma0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
+		};
+
+		color0: color@1400f000 {
+			compatible = "mediatek,mt8365-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x1400f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_COLOR0>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					color0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					color0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
+		};
+
+		ccorr0: ccorr@14010000 {
+			compatible = "mediatek,mt8365-disp-ccorr", "mediatek,mt8183-disp-ccorr";
+			reg = <0 0x14010000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_CCORR0>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					ccorr0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					ccorr0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
+		};
+
+		aal0: aal@14011000 {
+			compatible = "mediatek,mt8365-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x14011000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_AAL0>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					aal0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					aal0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
+		};
+
+		gamma0: gamma@14012000 {
+			compatible = "mediatek,mt8365-disp-gamma", "mediatek,mt8183-disp-gamma";
+			reg = <0 0x14012000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_GAMMA0>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					gamma0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					gamma0_out: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
+		};
+
+		dither0: dither@14013000 {
+			compatible = "mediatek,mt8365-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x14013000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_DITHER0>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					dither0_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					dither0_out: endpoint@0 {
+						reg = <0>;
+					};
+				};
+			};
+		};
+
+		dsi0: dsi@14014000 {
+			compatible = "mediatek,mt8365-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x14014000 0 0x1000>;
+			clock-names = "engine", "digital", "hs";
+			clocks = <&mmsys CLK_MM_MM_DSI0>,
+				 <&mmsys CLK_MM_DSI0_DIG_DSI>,
+				 <&mipi_tx0>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+			phy-names = "dphy";
+			phys = <&mipi_tx0>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+		};
+
+		rdma1: rdma@14016000 {
+			compatible = "mediatek,mt8365-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14016000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_DISP_RDMA1>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,rdma-fifo-size = <2048>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					rdma1_in: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mmsys_ext>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					rdma1_out: endpoint@1 {
+						reg = <1>;
+					};
+				};
+			};
+		};
+
+		dpi0: dpi@14018000 {
+			compatible = "mediatek,mt8365-dpi", "mediatek,mt8192-dpi";
+			reg = <0 0x14018000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DPI0_DPI0>,
+				 <&mmsys CLK_MM_MM_DPI0>,
+				 <&apmixedsys CLK_APMIXED_LVDSPLL>;
+			clock-names = "pixel", "engine", "pll";
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			status = "disabled";
+		};
+
 		camsys: syscon@15000000 {
 			compatible = "mediatek,mt8365-imgsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8370-genio-510-evk.dts b/arch/arm64/boot/dts/mediatek/mt8370-genio-510-evk.dts
new file mode 100644
index 000000000000..71a8cbed1df6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8370-genio-510-evk.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2025 Collabora Ltd.
+ * Author: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+/dts-v1/;
+
+#include "mt8370.dtsi"
+#include "mt8390-genio-common.dtsi"
+
+/ {
+	model = "MediaTek Genio-510 EVK";
+	compatible = "mediatek,mt8370-evk", "mediatek,mt8370", "mediatek,mt8188";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x1 0x00000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts b/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts
new file mode 100644
index 000000000000..92ff80e60974
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Grinn sp. z o.o.
+ * Author: Bartosz Bilas <bartosz.bilas@grinn-global.com>
+ */
+/dts-v1/;
+
+#include "mt8370.dtsi"
+#include "mt8390-grinn-genio-som.dtsi"
+#include "mt8390-grinn-genio-sbc.dtsi"
+
+/ {
+	model = "Grinn GenioSBC-510";
+	compatible = "grinn,genio-510-sbc", "mediatek,mt8370", "mediatek,mt8188";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 1 0x00000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8370.dtsi b/arch/arm64/boot/dts/mediatek/mt8370.dtsi
new file mode 100644
index 000000000000..7ac8b8d03494
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8370.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2025 Collabora Ltd.
+ * Author: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+/dts-v1/;
+#include "mt8188.dtsi"
+
+/ {
+	compatible = "mediatek,mt8370";
+
+	cpus {
+		/delete-node/ cpu@400;
+		/delete-node/ cpu@500;
+
+		cpu-map {
+			cluster0 {
+				/delete-node/ core4;
+				/delete-node/ core5;
+			};
+		};
+	};
+};
+
+&cpu6 {
+	clock-frequency = <2200000000>;
+};
+
+&cpu7 {
+	clock-frequency = <2200000000>;
+};
+
+&cpu_little0_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+&cpu_little1_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+&cpu_little2_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+&cpu_little3_cooling_map0 {
+	cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
+
+/*
+ * Please note that overriding compatibles is a discouraged practice and is a
+ * clear indication of nodes not being, well, compatible!
+ *
+ * This is a special case, where the GPU is the same as MT8188, but with one
+ * of the cores fused out in this lower-binned SoC.
+ */
+&gpu {
+	compatible = "mediatek,mt8370-mali", "arm,mali-valhall-jm";
+
+	power-domains = <&spm MT8188_POWER_DOMAIN_MFG2>,
+			<&spm MT8188_POWER_DOMAIN_MFG3>;
+
+	power-domain-names = "core0", "core1";
+};
+
+&ppi_cluster0 {
+	affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
index 13f2e0e3fa8a..612336713a64 100644
--- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
@@ -8,999 +8,16 @@
 /dts-v1/;
 
 #include "mt8188.dtsi"
-#include "mt6359.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
-#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
-#include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/usb/pd.h>
+#include "mt8390-genio-common.dtsi"
 
 / {
 	model = "MediaTek Genio-700 EVK";
 	compatible = "mediatek,mt8390-evk", "mediatek,mt8390",
 		     "mediatek,mt8188";
 
-	aliases {
-		ethernet0 = &eth;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		mmc0 = &mmc0;
-		mmc1 = &mmc1;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:921600n8";
-	};
-
-	firmware {
-		optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-		};
-	};
-
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0x2 0x00000000>;
 	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/*
-		 * 12 MiB reserved for OP-TEE (BL32)
-		 * +-----------------------+ 0x43e0_0000
-		 * |      SHMEM 2MiB       |
-		 * +-----------------------+ 0x43c0_0000
-		 * |        | TA_RAM  8MiB |
-		 * + TZDRAM +--------------+ 0x4340_0000
-		 * |        | TEE_RAM 2MiB |
-		 * +-----------------------+ 0x4320_0000
-		 */
-		optee_reserved: optee@43200000 {
-			no-map;
-			reg = <0 0x43200000 0 0x00c00000>;
-		};
-
-		scp_mem: memory@50000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x50000000 0 0x2900000>;
-			no-map;
-		};
-
-		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
-		bl31_secmon_reserved: memory@54600000 {
-			no-map;
-			reg = <0 0x54600000 0x0 0x200000>;
-		};
-
-		apu_mem: memory@55000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
-		};
-
-		vpu_mem: memory@57000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
-		};
-	};
-
-	common_fixed_5v: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&pio 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		vin-supply = <&reg_vsys>;
-	};
-
-	edp_panel_fixed_3v3: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vedp_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_panel_3v3_en_pins>;
-		vin-supply = <&reg_vsys>;
-	};
-
-	gpio_fixed_3v3: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "ext_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		vin-supply = <&reg_vsys>;
-	};
-
-	/* system wide 4.2V power rail from charger */
-	reg_vsys: regulator-vsys {
-		compatible = "regulator-fixed";
-		regulator-name = "vsys";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* used by mmc2 */
-	sdio_fixed_1v8: regulator-3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vio18_conn";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	/* used by mmc2 */
-	sdio_fixed_3v3: regulator-4 {
-		compatible = "regulator-fixed";
-		regulator-name = "wifi_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pio 74 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		vin-supply = <&reg_vsys>;
-	};
-
-	touch0_fixed_3v3: regulator-5 {
-		compatible = "regulator-fixed";
-		regulator-name = "vio33_tp1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pio 119 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_vsys>;
-	};
-
-	usb_hub_fixed_3v3: regulator-6 {
-		compatible = "regulator-fixed";
-		regulator-name = "vhub_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */
-		startup-delay-us = <10000>;
-		enable-active-high;
-		vin-supply = <&reg_vsys>;
-	};
-
-	usb_p0_vbus: regulator-7 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus_p0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_vsys>;
-	};
-
-	usb_p1_vbus: regulator-8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus_p1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&pio 87 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_vsys>;
-	};
-
-	/* used by ssusb2 */
-	usb_p2_vbus: regulator-9 {
-		compatible = "regulator-fixed";
-		regulator-name = "wifi_3v3";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-	};
-};
-
-&gpu {
-	mali-supply = <&mt6359_vproc2_buck_reg>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	touchscreen@5d {
-		compatible = "goodix,gt9271";
-		reg = <0x5d>;
-		interrupt-parent = <&pio>;
-		interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>;
-		irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
-		AVDD28-supply = <&touch0_fixed_3v3>;
-		VDDIO-supply = <&mt6359_vio18_ldo_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_pins>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-	clock-frequency = <1000000>;
-	status = "okay";
-};
-
-&i2c5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&i2c6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c6_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&mfg0 {
-	domain-supply = <&mt6359_vproc2_buck_reg>;
-};
-
-&mfg1 {
-	domain-supply = <&mt6359_vsram_others_ldo_reg>;
-};
-
-&mmc0 {
-	status = "okay";
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc0_default_pins>;
-	pinctrl-1 = <&mmc0_uhs_pins>;
-	bus-width = <8>;
-	max-frequency = <200000000>;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	supports-cqe;
-	cap-mmc-hw-reset;
-	no-sdio;
-	no-sd;
-	hs400-ds-delay = <0x1481b>;
-	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
-	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
-	non-removable;
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc1_default_pins>;
-	pinctrl-1 = <&mmc1_uhs_pins>;
-	bus-width = <4>;
-	max-frequency = <200000000>;
-	cap-sd-highspeed;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	no-mmc;
-	no-sdio;
-	cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&mt6359_vpa_buck_reg>;
-	vqmmc-supply = <&mt6359_vsim1_ldo_reg>;
-};
-
-&mt6359_vbbck_ldo_reg {
-	regulator-always-on;
-};
-
-&mt6359_vcn18_ldo_reg {
-	regulator-name = "vcn18_pmu";
-	regulator-always-on;
-};
-
-&mt6359_vcn33_2_bt_ldo_reg {
-	regulator-name = "vcn33_2_pmu";
-	regulator-always-on;
-};
-
-&mt6359_vcore_buck_reg {
-	regulator-name = "dvdd_proc_l";
-	regulator-always-on;
-};
-
-&mt6359_vgpu11_buck_reg {
-	regulator-name = "dvdd_core";
-	regulator-always-on;
-};
-
-&mt6359_vpa_buck_reg {
-	regulator-name = "vpa_pmu";
-	regulator-max-microvolt = <3100000>;
-};
-
-&mt6359_vproc2_buck_reg {
-	/* The name "vgpu" is required by mtk-regulator-coupler */
-	regulator-name = "vgpu";
-	regulator-min-microvolt = <550000>;
-	regulator-max-microvolt = <800000>;
-	regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
-	regulator-coupled-max-spread = <6250>;
-};
-
-&mt6359_vpu_buck_reg {
-	regulator-name = "dvdd_adsp";
-	regulator-always-on;
-};
-
-&mt6359_vrf12_ldo_reg {
-	regulator-name = "va12_abb2_pmu";
-	regulator-always-on;
-};
-
-&mt6359_vsim1_ldo_reg {
-	regulator-name = "vsim1_pmu";
-	regulator-enable-ramp-delay = <480>;
-};
-
-&mt6359_vsram_others_ldo_reg {
-	/* The name "vsram_gpu" is required by mtk-regulator-coupler */
-	regulator-name = "vsram_gpu";
-	regulator-min-microvolt = <750000>;
-	regulator-max-microvolt = <800000>;
-	regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
-	regulator-coupled-max-spread = <6250>;
-};
-
-&mt6359_vufs_ldo_reg {
-	regulator-name = "vufs18_pmu";
-	regulator-always-on;
-};
-
-&mt6359codec {
-	mediatek,mic-type-0 = <1>; /* ACC */
-	mediatek,mic-type-1 = <3>; /* DCC */
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_pins_default>;
-	status = "okay";
-};
-
-&pciephy {
-	status = "okay";
-};
-
-&pio {
-	audio_default_pins: audio-default-pins {
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
-				 <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
-				 <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
-				 <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
-				 <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
-				 <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>,
-				 <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>,
-				 <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>,
-				 <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>,
-				 <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
-				 <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>,
-				 <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
-				 <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
-				 <PINMUX_GPIO117__FUNC_O_I2SO2_D0>,
-				 <PINMUX_GPIO118__FUNC_O_I2SO2_D1>,
-				 <PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
-				 <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
-				 <PINMUX_GPIO124__FUNC_I0_PCM_DI>,
-				 <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>,
-				 <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>,
-				 <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>,
-				 <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>;
-		};
-	};
-
-	dptx_pins: dptx-pins {
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
-			bias-pull-up;
-		};
-	};
-
-	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
-		pins1 {
-			pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>;
-			output-high;
-		};
-	};
-
-	eth_default_pins: eth-default-pins {
-		pins-cc {
-			pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
-				 <PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
-				 <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
-				 <PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
-			drive-strength = <8>;
-		};
-
-		pins-mdio {
-			pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
-				 <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
-			drive-strength = <8>;
-			input-enable;
-		};
-
-		pins-power {
-			pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
-				 <PINMUX_GPIO146__FUNC_B_GPIO146>;
-			output-high;
-		};
-
-		pins-rxd {
-			pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
-				 <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
-				 <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
-				 <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
-			drive-strength = <8>;
-		};
-
-		pins-txd {
-			pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
-				 <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
-				 <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
-				 <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
-			drive-strength = <8>;
-		};
-	};
-
-	eth_sleep_pins: eth-sleep-pins {
-		pins-cc {
-			pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
-				 <PINMUX_GPIO140__FUNC_B_GPIO140>,
-				 <PINMUX_GPIO141__FUNC_B_GPIO141>,
-				 <PINMUX_GPIO142__FUNC_B_GPIO142>;
-		};
-
-		pins-mdio {
-			pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
-				 <PINMUX_GPIO144__FUNC_B_GPIO144>;
-			input-disable;
-			bias-disable;
-		};
-
-		pins-rxd {
-			pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
-				 <PINMUX_GPIO136__FUNC_B_GPIO136>,
-				 <PINMUX_GPIO137__FUNC_B_GPIO137>,
-				 <PINMUX_GPIO138__FUNC_B_GPIO138>;
-		};
-
-		pins-txd {
-			pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
-				 <PINMUX_GPIO132__FUNC_B_GPIO132>,
-				 <PINMUX_GPIO133__FUNC_B_GPIO133>,
-				 <PINMUX_GPIO134__FUNC_B_GPIO134>;
-		};
-	};
-
-	i2c0_pins: i2c0-pins {
-		pins {
-			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
-				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c1_pins: i2c1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
-				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c2_pins: i2c2-pins {
-		pins {
-			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
-				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c3_pins: i2c3-pins {
-		pins {
-			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
-				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c4_pins: i2c4-pins {
-		pins {
-			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
-				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c5_pins: i2c5-pins {
-		pins {
-			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
-				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c6_pins: i2c6-pins {
-		pins {
-			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
-				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	gpio_key_pins: gpio-key-pins {
-		pins {
-			pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>,
-				 <PINMUX_GPIO43__FUNC_B1_KPCOL1>,
-				 <PINMUX_GPIO44__FUNC_B1_KPROW0>;
-		};
-	};
-
-	mmc0_default_pins: mmc0-default-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
-			drive-strength = <6>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
-				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
-				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
-				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
-				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
-				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
-				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
-				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
-				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
-			input-enable;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-rst {
-			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc0_uhs_pins: mmc0-uhs-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
-				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
-				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
-				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
-				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
-				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
-				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
-				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
-				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
-			input-enable;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-ds {
-			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-rst {
-			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc1_default_pins: mmc1-default-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
-			drive-strength = <6>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
-				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
-				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
-				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
-				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
-			input-enable;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-insert {
-			pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>;
-			bias-pull-up;
-		};
-	};
-
-	mmc1_uhs_pins: mmc1-uhs-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
-			drive-strength = <6>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
-				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
-				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
-				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
-				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
-			input-enable;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc2_default_pins: mmc2-default-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
-			drive-strength = <4>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
-				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
-				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
-				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
-				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
-			input-enable;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-pcm {
-			pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>;
-		};
-	};
-
-	mmc2_uhs_pins: mmc2-uhs-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
-			drive-strength = <4>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
-				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
-				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
-				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
-				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
-			input-enable;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc2_eint_pins: mmc2-eint-pins {
-		pins-dat1 {
-			pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>;
-			input-enable;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc2_dat1_pins: mmc2-dat1-pins {
-		pins-dat1 {
-			pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>;
-			input-enable;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	panel_default_pins: panel-default-pins {
-		pins-dcdc {
-			pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
-			output-low;
-		};
-
-		pins-en {
-			pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
-			output-low;
-		};
-
-		pins-rst {
-			pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
-			output-high;
-		};
-	};
-
-	pcie_pins_default: pcie-default {
-		mux {
-			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
-				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
-				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
-			bias-pull-up;
-		};
-	};
-
-	rt1715_int_pins: rt1715-int-pins {
-		pins_cmd0_dat {
-			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
-			bias-pull-up;
-			input-enable;
-		};
-	};
-
-	spi0_pins: spi0-pins {
-		pins-spi {
-			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
-				<PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
-				<PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
-				<PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
-			bias-disable;
-		};
-	};
-
-	spi1_pins: spi1-pins {
-		pins-spi {
-			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
-				<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
-				<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
-				<PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
-			bias-disable;
-		};
-	};
-
-	spi2_pins: spi2-pins {
-		pins-spi {
-			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
-				<PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
-				<PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
-				<PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
-			bias-disable;
-		};
-	};
-
-	touch_pins: touch-pins {
-		pins-irq {
-			pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>;
-			input-enable;
-			bias-disable;
-		};
-
-		pins-reset {
-			pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>;
-			output-high;
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		pins {
-			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
-				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
-			bias-pull-up;
-		};
-	};
-
-	uart1_pins: uart1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>,
-				 <PINMUX_GPIO34__FUNC_I1_URXD1>;
-			bias-pull-up;
-		};
-	};
-
-	uart2_pins: uart2-pins {
-		pins {
-			pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
-				 <PINMUX_GPIO36__FUNC_I1_URXD2>;
-			bias-pull-up;
-		};
-	};
-
-	usb_default_pins: usb-default-pins {
-		pins-iddig {
-			pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>;
-			input-enable;
-			bias-pull-up;
-		};
-
-		pins-valid {
-			pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
-			input-enable;
-		};
-
-		pins-vbus {
-			pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>;
-			output-high;
-		};
-
-	};
-
-	usb1_default_pins: usb1-default-pins {
-		pins-valid {
-			pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>;
-			input-enable;
-		};
-
-		pins-usb-hub-3v3-en {
-			pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>;
-			output-high;
-		};
-	};
-
-	wifi_pwrseq_pins: wifi-pwrseq-pins {
-		pins-wifi-enable {
-			pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>;
-			output-low;
-		};
-	};
-};
-
-&eth {
-	phy-mode ="rgmii-id";
-	phy-handle = <&ethernet_phy0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&eth_default_pins>;
-	pinctrl-1 = <&eth_sleep_pins>;
-	mediatek,mac-wol;
-	snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
-	snps,reset-delays-us = <0 10000 10000>;
-	status = "okay";
-};
-
-&eth_mdio {
-	ethernet_phy0: ethernet-phy@1 {
-		compatible = "ethernet-phy-id001c.c916";
-		reg = <0x1>;
-	};
 };
 
-&pmic {
-	interrupt-parent = <&pio>;
-	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
-
-	mt6359keys: keys {
-		compatible = "mediatek,mt6359-keys";
-		mediatek,long-press-mode = <1>;
-		power-off-time-sec = <0>;
-
-		power-key {
-			linux,keycodes = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-};
-
-&scp {
-	memory-region = <&scp_mem>;
-	status = "okay";
-};
-
-&spi2 {
-	pinctrl-0 = <&spi2_pins>;
-	pinctrl-names = "default";
-	mediatek,pad-select = <0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-0 = <&uart1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&u3phy0 {
-	status = "okay";
-};
-
-&u3phy1 {
-	status = "okay";
-};
-
-&u3phy2 {
-	status = "okay";
-};
-
-&xhci0 {
-	status = "okay";
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-};
-
-&xhci1 {
-	status = "okay";
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	hub_2_0: hub@1 {
-		compatible = "usb451,8025";
-		reg = <1>;
-		peer-hub = <&hub_3_0>;
-		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
-		vdd-supply = <&usb_hub_fixed_3v3>;
-	};
-
-	hub_3_0: hub@2 {
-		compatible = "usb451,8027";
-		reg = <2>;
-		peer-hub = <&hub_2_0>;
-		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
-		vdd-supply = <&usb_hub_fixed_3v3>;
-	};
-};
-
-&xhci2 {
-	status = "okay";
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	vbus-supply = <&sdio_fixed_3v3>; /* wifi_3v3 */
-};
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
new file mode 100644
index 000000000000..a2cdecd2b903
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
@@ -0,0 +1,1370 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Chris Chen <chris-qj.chen@mediatek.com>
+ *         Pablo Sun <pablo.sun@mediatek.com>
+ *         Macpaul Lin <macpaul.lin@mediatek.com>
+ *
+ * Copyright (C) 2025 Collabora Ltd.
+ *                    Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>   
+ */
+
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	aliases {
+		dsi0 = &disp_dsi0;
+		ethernet0 = &eth;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	backlight_lcm1: backlight-lcm1 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		num-interpolated-steps = <1023>;
+		power-supply = <&reg_vsys>;
+		pwms = <&disp_pwm1 0 500000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	dmic_codec: dmic-codec {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <30>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		apu_mem: memory@55000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
+		};
+
+		vpu_mem: memory@57000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	common_fixed_5v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_vsys>;
+	};
+
+	edp_panel_fixed_3v3: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vedp_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_3v3_en_pins>;
+		vin-supply = <&reg_vsys>;
+	};
+
+	gpio_fixed_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "ext_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_vsys>;
+	};
+
+	/* system wide 4.2V power rail from charger */
+	reg_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* used by mmc2 */
+	sdio_fixed_1v8: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_conn";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	/* used by mmc2 */
+	sdio_fixed_3v3: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 74 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_vsys>;
+	};
+
+	touch0_fixed_3v3: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio33_tp1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_vreg_pins>;
+	};
+
+	usb_hub_fixed_3v3: regulator-6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vhub_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */
+		startup-delay-us = <10000>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+	};
+
+	usb_p0_vbus: regulator-7 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_p0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+	};
+
+	usb_p1_vbus: regulator-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_p1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 87 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vsys>;
+	};
+
+	/* used by ssusb2 */
+	usb_p2_vbus: regulator-9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_p2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	lcm1_iovcc: regulator-vio18-lcm1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_lcm1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pio 111 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_vreg_en_pins>;
+		vin-supply = <&reg_vsys>;
+	};
+
+	lcm1_vddp: regulator-vsys-lcm1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_lcm1";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vsys>;
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&disp_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid078", "himax,hx8279";
+		reg = <0>;
+		backlight = <&backlight_lcm1>;
+		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&lcm1_iovcc>;
+		vdd-supply = <&lcm1_vddp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
+&disp_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm1_pins>;
+	status = "okay";
+};
+
+&dither0_in {
+	remote-endpoint = <&postmask0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&gamma0_out {
+	remote-endpoint = <&postmask0_in>;
+};
+
+&gpu {
+	mali-supply = <&mt6359_vproc2_buck_reg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&touch0_fixed_3v3>;
+		VDDIO-supply = <&mt6359_vio18_ldo_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+
+		mode-switch;
+		orientation-switch;
+
+		vcc-supply = <&mt6359_vcn33_1_bt_ldo_reg>;
+
+		port {
+			it5205_sbu_mux: endpoint {
+				remote-endpoint = <&typec_sbu_out>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	rt1715@4e {
+		compatible = "richtek,rt1715";
+		reg = <0x4e>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tcpci_int_pins>;
+		vbus-supply = <&usb_p1_vbus>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			op-sink-microwatt = <10000000>;
+			power-role = "dual";
+			try-power-role  = "sink";
+			pd-revision = /bits/ 8 <0x03 0x00 0x01 0x08>;
+
+			sink-pdos = <PDO_FIXED(5000, 2000,
+					       PDO_FIXED_DUAL_ROLE |
+					       PDO_FIXED_DATA_SWAP)>;
+			source-pdos = <PDO_FIXED(5000, 2000,
+						 PDO_FIXED_DUAL_ROLE |
+						 PDO_FIXED_DATA_SWAP)>;
+
+			altmodes {
+				displayport {
+					svid = /bits/ 16 <0xff01>;
+					vdo = <0x001c1c47>;
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					typec_con_hs: endpoint {
+						remote-endpoint = <&mtu3_hs1_role_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&xhci_ss_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					typec_sbu_out: endpoint {
+						remote-endpoint = <&it5205_sbu_mux>;
+					};
+
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mfg0 {
+	domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx_config0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x1481b>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mt6359_vpa_buck_reg>;
+	vqmmc-supply = <&mt6359_vsim1_ldo_reg>;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn18_ldo_reg {
+	regulator-name = "vcn18_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-name = "vcn33_2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-name = "dvdd_proc_l";
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-name = "dvdd_core";
+	regulator-always-on;
+};
+
+&mt6359_vpa_buck_reg {
+	regulator-name = "vpa_pmu";
+	regulator-max-microvolt = <3100000>;
+};
+
+&mt6359_vproc2_buck_reg {
+	/* The name "vgpu" is required by mtk-regulator-coupler */
+	regulator-name = "vgpu";
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-name = "dvdd_adsp";
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-name = "va12_abb2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vsim1_ldo_reg {
+	regulator-name = "vsim1_pmu";
+	regulator-enable-ramp-delay = <480>;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	/* The name "vsram_gpu" is required by mtk-regulator-coupler */
+	regulator-name = "vsram_gpu";
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-name = "vufs18_pmu";
+	regulator-always-on;
+};
+
+&mt6359codec {
+	mediatek,mic-type-0 = <1>; /* ACC */
+	mediatek,mic-type-1 = <3>; /* DCC */
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default_pins>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>,
+				 <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>,
+				 <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>,
+				 <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
+				 <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>,
+				 <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
+				 <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
+				 <PINMUX_GPIO117__FUNC_O_I2SO2_D0>,
+				 <PINMUX_GPIO118__FUNC_O_I2SO2_D1>,
+				 <PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
+				 <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
+				 <PINMUX_GPIO124__FUNC_I0_PCM_DI>,
+				 <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>,
+				 <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>,
+				 <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>,
+				 <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>;
+		};
+	};
+
+	disp_pwm1_pins: disp-pwm1-pins {
+		pins-pwm {
+			pinmux = <PINMUX_GPIO30__FUNC_O_DISP_PWM1>;
+		};
+	};
+
+	dptx_pins: dptx-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>;
+			output-high;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
+				 <PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
+				 <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
+				 <PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
+				 <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
+				 <PINMUX_GPIO146__FUNC_B_GPIO146>;
+			output-high;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
+				 <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
+				 <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
+				 <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
+			drive-strength = <8>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
+				 <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
+				 <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
+				 <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
+				 <PINMUX_GPIO140__FUNC_B_GPIO140>,
+				 <PINMUX_GPIO141__FUNC_B_GPIO141>,
+				 <PINMUX_GPIO142__FUNC_B_GPIO142>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
+				 <PINMUX_GPIO144__FUNC_B_GPIO144>;
+			input-disable;
+			bias-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
+				 <PINMUX_GPIO136__FUNC_B_GPIO136>,
+				 <PINMUX_GPIO137__FUNC_B_GPIO137>,
+				 <PINMUX_GPIO138__FUNC_B_GPIO138>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
+				 <PINMUX_GPIO132__FUNC_B_GPIO132>,
+				 <PINMUX_GPIO133__FUNC_B_GPIO133>,
+				 <PINMUX_GPIO134__FUNC_B_GPIO134>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	gpio_key_pins: gpio-key-pins {
+		pins {
+			pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>,
+				 <PINMUX_GPIO43__FUNC_B1_KPCOL1>,
+				 <PINMUX_GPIO44__FUNC_B1_KPROW0>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-insert {
+			pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_default_pins: mmc2-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+			drive-strength = <4>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-pcm {
+			pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>;
+		};
+	};
+
+	mmc2_uhs_pins: mmc2-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+			drive-strength = <4>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_eint_pins: mmc2-eint-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_dat1_pins: mmc2-dat1-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
+		pins-pwr-en {
+			pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
+			output-low;
+		};
+
+		pins-en {
+			pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
+			output-low;
+		};
+	};
+
+	pcie_default_pins: pcie-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
+				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
+				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	rt1715_int_pins: rt1715-int-pins {
+		pins_cmd0_dat {
+			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				<PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				<PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				<PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				<PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				<PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				<PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				<PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	touch_vreg_pins: touch-avdd-pins {
+		pins-power {
+			pinmux = <PINMUX_GPIO120__FUNC_B_GPIO120>;
+			output-high;
+		};
+	};
+
+	touch_pins: touch-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>;
+			output-high;
+		};
+	};
+
+	tcpci_int_pins: tcpci-int-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>,
+				 <PINMUX_GPIO34__FUNC_I1_URXD1>;
+			bias-pull-up;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
+				 <PINMUX_GPIO36__FUNC_I1_URXD2>;
+			bias-pull-up;
+		};
+	};
+
+	usb_default_pins: usb-default-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-valid {
+			pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
+			input-enable;
+		};
+
+		pins-vbus {
+			pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>;
+			output-high;
+		};
+
+	};
+
+	usb1_default_pins: usb1-default-pins {
+		pins-valid {
+			pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>;
+			input-enable;
+		};
+
+		pins-usb-hub-3v3-en {
+			pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>;
+			output-high;
+		};
+	};
+
+	usb2_default_pins: usb2-default-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO89__FUNC_B_GPIO89>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	wifi_pwrseq_pins: wifi-pwrseq-pins {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>;
+			output-low;
+		};
+	};
+};
+
+&eth {
+	phy-mode ="rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
+	snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 10000>;
+	status = "okay";
+};
+
+&eth_mdio {
+	ethernet_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+	};
+};
+
+&pmic {
+	interrupt-parent = <&pio>;
+	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
+};
+
+&postmask0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&postmask0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8390-mt6359-evk", "mediatek,mt8188-mt6359-evb";
+	model = "mt8390-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R",
+		"DMIC_INPUT", "AP DMIC",
+		"AP DMIC", "AUDGLB",
+		"AP DMIC", "MIC_BIAS_0",
+		"AP DMIC", "MIC_BIAS_2";
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	dai-link-0 {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
+
+	dai-link-1 {
+		link-name = "DMIC_BE";
+
+		codec {
+			sound-dai = <&dmic_codec>;
+		};
+	};
+};
+
+&spi2 {
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&ssusb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	usb-role-switch;
+	wakeup-source;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	pinctrl-0 = <&usb_default_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 83 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb_p0_vbus>;
+	};
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&ssusb1 {
+	dr_mode = "otg";
+	usb-role-switch;
+	wakeup-source;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	pinctrl-0 = <&usb1_default_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	port {
+		mtu3_hs1_role_sw: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&xhci1 {
+	status = "okay";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8025";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&usb_hub_fixed_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8027";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&usb_hub_fixed_3v3>;
+	};
+
+	port {
+		xhci_ss_ep: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&ssusb2 {
+	/*
+	 * the ssusb2 controller is one but we got two ports : one is routed
+	 * to the M.2 slot, the other is on the RPi header who does support
+	 * full OTG.
+	 * As the controller is shared between them, the role switch default
+	 * mode is set to host to make any peripheral inserted in the M.2
+	 * slot (i.e BT/WIFI module) be detected when the other port is
+	 * unused.
+	 */
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	role-switch-default-mode = "host";
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	wakeup-source;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_default_pins>;
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 89 GPIO_ACTIVE_LOW>;
+		vbus-supply = <&usb_p2_vbus>;
+	};
+};
+
+&xhci2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&sdio_fixed_3v3>; /* wifi_3v3 */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts
new file mode 100644
index 000000000000..4931d761bd1f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Grinn sp. z o.o.
+ * Author: Mateusz Koza <mateusz.koza@grinn-global.com>
+ */
+/dts-v1/;
+
+#include "mt8188.dtsi"
+#include "mt8390-grinn-genio-som.dtsi"
+#include "mt8390-grinn-genio-sbc.dtsi"
+
+/ {
+	model = "Grinn GenioSBC-700";
+	compatible = "grinn,genio-700-sbc", "mediatek,mt8390", "mediatek,mt8188";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 1 0x00000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi
new file mode 100644
index 000000000000..888248a75e93
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi
@@ -0,0 +1,538 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Grinn sp. z o.o.
+ * Author: Mateusz Koza <mateusz.koza@grinn-global.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chassis-type = "embedded";
+
+	aliases {
+		ethernet0 = &eth;
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		apu_mem: memory@55000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
+		};
+
+		vpu_mem: memory@57000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	reg_sbc_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_fixed_5v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_sbc_vsys>;
+	};
+
+	reg_fixed_4v2: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-4v2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_sbc_vsys>;
+	};
+
+	reg_fixed_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_sbc_vsys>;
+	};
+};
+
+&pio {
+	gpio-line-names =
+	/*  0 -  4   */ "RPI_GPIO0", "RPI_GPIO1", "", "", "RPI_GPIO4",
+	/*  5 -  9   */ "", "RPI_GPIO6", "", "", "RPI_GPIO9",
+	/* 10 - 14   */ "RPI_GPIO10", "RPI_GPIO11", "", "", "",
+	/* 15 - 19   */ "", "", "", "", "",
+	/* 20 - 24   */ "", "RPI_GPIO21", "", "RPI_GPIO23", "",
+	/* 25 - 29   */ "", "", "", "", "",
+	/* 30 - 34   */ "RPI_GPIO30", "", "", "", "",
+	/* 35 - 39   */ "RPI_GPIO35", "RPI_GPIO36", "", "", "",
+	/* 40 - 44   */ "", "", "", "", "",
+	/* 45 - 49   */ "", "", "", "", "",
+	/* 50 - 54   */ "", "", "", "", "",
+	/* 55 - 59   */ "RPI_GPIO55", "RPI_GPIO56", "", "", "RPI_GPIO59",
+	/* 60 - 64   */ "RPI_GPIO60", "", "", "", "",
+	/* 65 - 69   */ "", "", "", "", "RPI_GPIO69",
+	/* 70 - 74   */ "", "", "RPI_GPIO72", "RPI_GPIO73", "RPI_GPIO74",
+	/* 75 - 79   */ "", "", "", "", "RPI_GPIO79",
+	/* 80 - 84   */ "RPI_GPIO80", "RPI_GPIO81", "RPI_GPIO82", "", "",
+	/* 85 - 89   */ "", "", "", "", "",
+	/* 90 - 94   */ "", "", "", "", "",
+	/* 95 - 99   */ "", "", "", "", "",
+	/*100 - 104  */ "", "", "", "", "",
+	/*105 - 109  */ "", "", "", "", "",
+	/*110 - 114  */ "", "", "", "", "",
+	/*115 - 119  */ "", "", "", "", "",
+	/*120 - 124  */ "", "RPI_GPIO121", "RPI_GPIO122", "RPI_GPIO123", "RPI_GPIO124";
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO86__FUNC_O_UTXD1>,
+				 <PINMUX_GPIO87__FUNC_I1_URXD1>;
+			bias-pull-up;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
+				 <PINMUX_GPIO36__FUNC_I1_URXD2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie_pins_default: pcie-default {
+		mux {
+			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
+				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
+				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
+				 <PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
+				 <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
+				 <PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
+				 <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
+				 <PINMUX_GPIO146__FUNC_B_GPIO146>;
+			output-high;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
+				 <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
+				 <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
+				 <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
+			drive-strength = <8>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
+				 <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
+				 <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
+				 <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
+				 <PINMUX_GPIO140__FUNC_B_GPIO140>,
+				 <PINMUX_GPIO141__FUNC_B_GPIO141>,
+				 <PINMUX_GPIO142__FUNC_B_GPIO142>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
+				 <PINMUX_GPIO144__FUNC_B_GPIO144>;
+			input-disable;
+			bias-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
+				 <PINMUX_GPIO136__FUNC_B_GPIO136>,
+				 <PINMUX_GPIO137__FUNC_B_GPIO137>,
+				 <PINMUX_GPIO138__FUNC_B_GPIO138>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
+				 <PINMUX_GPIO132__FUNC_B_GPIO132>,
+				 <PINMUX_GPIO133__FUNC_B_GPIO133>,
+				 <PINMUX_GPIO134__FUNC_B_GPIO134>;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				<PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				<PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				<PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
+				 <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
+				 <PINMUX_GPIO123__FUNC_O_PCM_DO>,
+				 <PINMUX_GPIO124__FUNC_I0_PCM_DI>;
+		};
+	};
+
+	usb_default_pins: usb-default-pins {
+		pins-valid {
+			pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
+			input-enable;
+		};
+	};
+};
+
+&eth {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
+	mediatek,tx-delay-ps = <30>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 11000 200000>;
+	snps,reset-gpio = <&pio 147 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&eth_mdio {
+	ethernet_phy0: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		interrupts-extended = <&pio 148 IRQ_TYPE_LEVEL_LOW>;
+		eee-broken-1000t;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins_default>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&xhci1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8027";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&reg_fixed_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8025";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&reg_fixed_3v3>;
+	};
+};
+
+&xhci2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	hub@1 {
+		compatible = "microchip,usb2513bi";
+		reg = <1>;
+		vdd-supply = <&reg_fixed_3v3>;
+	};
+};
+
+&ssusb0 {
+	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_default_pins>;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb1 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb2 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&mt6359_vproc2_buck_reg>;
+	status = "okay";
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8390-mt6359-evk", "mediatek,mt8188-mt6359-evb";
+	model = "mt8390-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R",
+		"AP DMIC", "AUDGLB",
+		"AP DMIC", "MIC_BIAS_0",
+		"AP DMIC", "MIC_BIAS_2",
+		"DMIC_INPUT", "AP DMIC";
+
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi
new file mode 100644
index 000000000000..8da47c916313
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Grinn sp. z o.o.
+ * Author: Mateusz Koza <mateusz.koza@grinn-global.com>
+ */
+
+#include "mt6359.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		i2c1 = &i2c1;
+		mmc0 = &mmc0;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mfg0 {
+	domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x1481b>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn18_ldo_reg {
+	regulator-name = "vcn18_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-name = "vcn33_2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-name = "dvdd_proc_l";
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-name = "dvdd_core";
+	regulator-always-on;
+};
+
+&mt6359_vpa_buck_reg {
+	regulator-name = "vpa_pmu";
+	regulator-max-microvolt = <3100000>;
+};
+
+&mt6359_vproc2_buck_reg {
+	/* The name "vgpu" is required by mtk-regulator-coupler */
+	regulator-name = "vgpu";
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-name = "dvdd_adsp";
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-name = "va12_abb2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vsim1_ldo_reg {
+	regulator-name = "vsim1_pmu";
+	regulator-enable-ramp-delay = <480>;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	/* The name "vsram_gpu" is required by mtk-regulator-coupler */
+	regulator-name = "vsram_gpu";
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-name = "vufs18_pmu";
+	regulator-always-on;
+};
+
+&pio {
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+};
+
+&pmic {
+	interrupt-parent = <&pio>;
+	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+	keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts
new file mode 100644
index 000000000000..e09a3ecd8773
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 MediaTek Inc.
+ * Author: Ramax Lo <ramax.lo@mediatek.com>
+ *         Macpaul Lin <macpaul.lin@mediatek.com>
+ */
+/dts-v1/;
+
+#include "mt8395-genio-common.dtsi"
+
+/ {
+	model = "MediaTek Genio 1200 EVK-P1V2-UFS";
+	compatible = "mediatek,mt8395-evk-ufs", "mediatek,mt8395",
+		     "mediatek,mt8195";
+};
+
+&ufshci {
+	status = "okay";
+	vcc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vccq2-supply = <&mt6359_vufs_ldo_reg>;
+};
+
+&ufsphy {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index 5f16fb820580..68455f28c246 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -6,927 +6,10 @@
  */
 /dts-v1/;
 
-#include "mt8195.dtsi"
-#include "mt6359.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
-#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
-#include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/usb/pd.h>
+#include "mt8395-genio-common.dtsi"
 
 / {
 	model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
 	compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
 		     "mediatek,mt8195";
-
-	aliases {
-		serial0 = &uart0;
-		ethernet0 = &eth;
-	};
-
-	chosen {
-		stdout-path = "serial0:921600n8";
-	};
-
-	firmware {
-		optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-		};
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0x2 0x00000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/*
-		 * 12 MiB reserved for OP-TEE (BL32)
-		 * +-----------------------+ 0x43e0_0000
-		 * |      SHMEM 2MiB       |
-		 * +-----------------------+ 0x43c0_0000
-		 * |        | TA_RAM  8MiB |
-		 * + TZDRAM +--------------+ 0x4340_0000
-		 * |        | TEE_RAM 2MiB |
-		 * +-----------------------+ 0x4320_0000
-		 */
-		optee_reserved: optee@43200000 {
-			no-map;
-			reg = <0 0x43200000 0 0x00c00000>;
-		};
-
-		scp_mem: memory@50000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x50000000 0 0x2900000>;
-			no-map;
-		};
-
-		vpu_mem: memory@53000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
-		};
-
-		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
-		bl31_secmon_mem: memory@54600000 {
-			no-map;
-			reg = <0 0x54600000 0x0 0x200000>;
-		};
-
-		snd_dma_mem: memory@60000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x60000000 0 0x1100000>;
-			no-map;
-		};
-
-		apu_mem: memory@62000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
-		};
-	};
-
-	backlight_lcd0: backlight-lcd0 {
-		compatible = "pwm-backlight";
-		pwms = <&disp_pwm0 0 500000>;
-		enable-gpios = <&pio 47 GPIO_ACTIVE_HIGH>;
-		brightness-levels = <0 1023>;
-		num-interpolated-steps = <1023>;
-		default-brightness-level = <576>;
-	};
-
-	backlight_lcd1: backlight-lcd1 {
-		compatible = "pwm-backlight";
-		pwms = <&disp_pwm1 0 500000>;
-		enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
-		brightness-levels = <0 1023>;
-		num-interpolated-steps = <1023>;
-		default-brightness-level = <576>;
-	};
-
-	can_clk: can-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <20000000>;
-		clock-output-names = "can-clk";
-	};
-
-	edp_panel_fixed_3v3: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "edp_panel_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_panel_3v3_en_pins>;
-	};
-
-	edp_panel_fixed_12v: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "edp_backlight_12v";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		enable-active-high;
-		gpio = <&pio 96 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_panel_12v_en_pins>;
-	};
-
-	keys: gpio-keys {
-		compatible = "gpio-keys";
-
-		button-volume-up {
-			wakeup-source;
-			debounce-interval = <100>;
-			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
-			label = "volume_up";
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	wifi_fixed_3v3: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wifi_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-};
-
-&disp_pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_default_pins>;
-	status = "okay";
-};
-
-&dmic_codec {
-	wakeup-delay-ms = <200>;
-};
-
-&eth {
-	phy-mode ="rgmii-rxid";
-	phy-handle = <&eth_phy0>;
-	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
-	snps,reset-delays-us = <0 10000 10000>;
-	mediatek,tx-delay-ps = <2030>;
-	mediatek,mac-wol;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&eth_default_pins>;
-	pinctrl-1 = <&eth_sleep_pins>;
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		eth_phy0: ethernet-phy@1 {
-			compatible = "ethernet-phy-id001c.c916";
-			reg = <0x1>;
-		};
-	};
-};
-
-&gpu {
-	mali-supply = <&mt6315_7_vbuck1>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	touchscreen@5d {
-		compatible = "goodix,gt9271";
-		reg = <0x5d>;
-		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
-		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
-		AVDD28-supply = <&mt6360_ldo1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_pins>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c6 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c6_pins>;
-	pinctrl-names = "default";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	mt6360: pmic@34 {
-		compatible = "mediatek,mt6360";
-		reg = <0x34>;
-		interrupt-parent = <&pio>;
-		interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-names = "IRQB";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		pinctrl-0 = <&mt6360_pins>;
-
-		charger {
-			compatible = "mediatek,mt6360-chg";
-			richtek,vinovp-microvolt = <14500000>;
-
-			otg_vbus_regulator: usb-otg-vbus-regulator {
-				regulator-name = "usb-otg-vbus";
-				regulator-min-microvolt = <4425000>;
-				regulator-max-microvolt = <5825000>;
-			};
-		};
-
-		regulator {
-			compatible = "mediatek,mt6360-regulator";
-			LDO_VIN3-supply = <&mt6360_buck2>;
-
-			mt6360_buck1: buck1 {
-				regulator-name = "emi_vdd2";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP
-							   MT6360_OPMODE_ULP>;
-				regulator-always-on;
-			};
-
-			mt6360_buck2: buck2 {
-				regulator-name = "emi_vddq";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP
-							   MT6360_OPMODE_ULP>;
-				regulator-always-on;
-			};
-
-			mt6360_ldo1: ldo1 {
-				regulator-name = "tp1_p3v0";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-				regulator-always-on;
-			};
-
-			mt6360_ldo2: ldo2 {
-				regulator-name = "panel1_p1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			mt6360_ldo3: ldo3 {
-				regulator-name = "vmc_pmu";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			mt6360_ldo5: ldo5 {
-				regulator-name = "vmch_pmu";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			/* This is a measure point, which name is mt6360_ldo1 on schematic */
-			mt6360_ldo6: ldo6 {
-				regulator-name = "mt6360_ldo1";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			mt6360_ldo7: ldo7 {
-				regulator-name = "emi_vmddr_en";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&mfg0 {
-	domain-supply = <&mt6315_7_vbuck1>;
-};
-
-&mfg1 {
-	domain-supply = <&mt6359_vsram_others_ldo_reg>;
-};
-
-&mmc0 {
-	status = "okay";
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc0_default_pins>;
-	pinctrl-1 = <&mmc0_uhs_pins>;
-	bus-width = <8>;
-	max-frequency = <200000000>;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	cap-mmc-hw-reset;
-	no-sdio;
-	no-sd;
-	hs400-ds-delay = <0x14c11>;
-	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
-	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
-	non-removable;
-};
-
-&mmc1 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc1_default_pins>;
-	pinctrl-1 = <&mmc1_uhs_pins>;
-	bus-width = <4>;
-	max-frequency = <200000000>;
-	cap-sd-highspeed;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	no-mmc;
-	no-sdio;
-	vmmc-supply = <&mt6360_ldo5>;
-	vqmmc-supply = <&mt6360_ldo3>;
-	status = "okay";
-	non-removable;
-};
-
-&mt6359_vaud18_ldo_reg {
-	regulator-always-on;
-};
-
-&mt6359_vbbck_ldo_reg {
-	regulator-always-on;
-};
-
-/* For USB Hub */
-&mt6359_vcamio_ldo_reg {
-	regulator-always-on;
-};
-
-&mt6359_vcn33_2_bt_ldo_reg {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-&mt6359_vcore_buck_reg {
-	regulator-always-on;
-};
-
-&mt6359_vgpu11_buck_reg {
-	regulator-always-on;
-};
-
-&mt6359_vpu_buck_reg {
-	regulator-always-on;
-};
-
-&mt6359_vrf12_ldo_reg {
-	regulator-always-on;
-};
-
-/* for GPU SRAM */
-&mt6359_vsram_others_ldo_reg {
-	regulator-min-microvolt = <750000>;
-	regulator-max-microvolt = <750000>;
-};
-
-&mt6359codec {
-	mediatek,mic-type-0 = <1>; /* ACC */
-	mediatek,mic-type-1 = <3>; /* DCC */
-	mediatek,mic-type-2 = <1>; /* ACC */
-};
-
-&pcie0 {
-	pinctrl-names = "default", "idle";
-	pinctrl-0 = <&pcie0_default_pins>;
-	pinctrl-1 = <&pcie0_idle_pins>;
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie1_default_pins>;
-	status = "disabled";
-};
-
-&pciephy {
-	status = "okay";
-};
-
-&pio {
-	audio_default_pins: audio-default-pins {
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>,
-				 <PINMUX_GPIO62__FUNC_DMIC1_DAT>,
-				 <PINMUX_GPIO65__FUNC_PCM_DO>,
-				 <PINMUX_GPIO66__FUNC_PCM_CLK>,
-				 <PINMUX_GPIO67__FUNC_PCM_DI>,
-				 <PINMUX_GPIO68__FUNC_PCM_SYNC>,
-				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
-				 <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
-				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
-				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
-				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
-				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
-				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
-		};
-	};
-
-	disp_pwm1_default_pins: disp-pwm1-default-pins {
-		pins1 {
-			pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>;
-		};
-	};
-
-	edp_panel_12v_en_pins: edp-panel-12v-en-pins {
-		pins1 {
-			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
-			output-high;
-		};
-	};
-
-	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
-		pins1 {
-			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
-			output-high;
-		};
-	};
-
-	eth_default_pins: eth-default-pins {
-		pins-cc {
-			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
-				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
-				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
-				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
-			drive-strength = <8>;
-		};
-
-		pins-mdio {
-			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
-				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
-			input-enable;
-		};
-
-		pins-power {
-			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
-				 <PINMUX_GPIO92__FUNC_GPIO92>;
-			output-high;
-		};
-
-		pins-rxd {
-			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
-				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
-				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
-				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
-		};
-
-		pins-txd {
-			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
-				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
-				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
-				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
-			drive-strength = <8>;
-		};
-	};
-
-	eth_sleep_pins: eth-sleep-pins {
-		pins-cc {
-			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
-				 <PINMUX_GPIO86__FUNC_GPIO86>,
-				 <PINMUX_GPIO87__FUNC_GPIO87>,
-				 <PINMUX_GPIO88__FUNC_GPIO88>;
-		};
-
-		pins-mdio {
-			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
-				 <PINMUX_GPIO90__FUNC_GPIO90>;
-			input-disable;
-			bias-disable;
-		};
-
-		pins-rxd {
-			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
-				 <PINMUX_GPIO82__FUNC_GPIO82>,
-				 <PINMUX_GPIO83__FUNC_GPIO83>,
-				 <PINMUX_GPIO84__FUNC_GPIO84>;
-		};
-
-		pins-txd {
-			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
-				 <PINMUX_GPIO78__FUNC_GPIO78>,
-				 <PINMUX_GPIO79__FUNC_GPIO79>,
-				 <PINMUX_GPIO80__FUNC_GPIO80>;
-		};
-	};
-
-	gpio_key_pins: gpio-keys-pins {
-		pins {
-			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
-			bias-pull-up;
-			input-enable;
-		};
-	};
-
-	i2c0_pins: i2c0-pins {
-		pins {
-			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
-				 <PINMUX_GPIO9__FUNC_SCL0>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c1_pins: i2c1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
-				 <PINMUX_GPIO11__FUNC_SCL1>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c2_pins: i2c2-pins {
-		pins {
-			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
-				 <PINMUX_GPIO13__FUNC_SCL2>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength = <6>;
-		};
-	};
-
-	i2c6_pins: i2c6-pins {
-		pins {
-			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
-				 <PINMUX_GPIO26__FUNC_SCL6>;
-			bias-pull-up;
-		};
-	};
-
-	mmc0_default_pins: mmc0-default-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <6>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
-				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
-				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
-				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
-				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
-				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
-				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
-				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
-				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
-			input-enable;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-rst {
-			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc0_uhs_pins: mmc0-uhs-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
-				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
-				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
-				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
-				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
-				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
-				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
-				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
-				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
-			input-enable;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-ds {
-			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-rst {
-			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc1_default_pins: mmc1-default-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
-				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
-				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
-				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
-				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
-			input-enable;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc1_uhs_pins: mmc1-uhs-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
-				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
-				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
-				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
-				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
-			input-enable;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mt6360_pins: mt6360-pins {
-		pins {
-			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
-				 <PINMUX_GPIO128__FUNC_GPIO128>;
-			input-enable;
-			bias-pull-up;
-		};
-	};
-
-	pcie0_default_pins: pcie0-default-pins {
-		pins {
-			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
-				 <PINMUX_GPIO20__FUNC_PERSTN>,
-				 <PINMUX_GPIO21__FUNC_CLKREQN>;
-			bias-pull-up;
-		};
-	};
-
-	pcie0_idle_pins: pcie0-idle-pins {
-		pins {
-			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
-			bias-disable;
-			output-low;
-		};
-	};
-
-	pcie1_default_pins: pcie1-default-pins {
-		pins {
-			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
-				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
-				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
-			bias-pull-up;
-		};
-	};
-
-	pwm0_default_pins: pwm0-default-pins {
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
-		};
-	};
-
-	spi1_pins: spi1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
-				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
-				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
-				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
-			bias-disable;
-		};
-	};
-
-	spi2_pins: spi-pins {
-		pins {
-			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
-				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
-				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
-				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
-			bias-disable;
-		};
-	};
-
-	touch_pins: touch-pins {
-		pins-irq {
-			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
-			input-enable;
-			bias-disable;
-		};
-
-		pins-reset {
-			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
-			output-high;
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		pins {
-			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
-				 <PINMUX_GPIO99__FUNC_URXD0>;
-		};
-	};
-
-	uart1_pins: uart1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO100__FUNC_URTS1>,
-				 <PINMUX_GPIO101__FUNC_UCTS1>,
-				 <PINMUX_GPIO102__FUNC_UTXD1>,
-				 <PINMUX_GPIO103__FUNC_URXD1>;
-		};
-	};
-};
-
-&pmic {
-	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&scp {
-	memory-region = <&scp_mem>;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-	mediatek,pad-select = <0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-	cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
-
-	can0: can@0 {
-		compatible = "microchip,mcp2518fd";
-		reg = <0>;
-		clocks = <&can_clk>;
-		spi-max-frequency = <20000000>;
-		interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
-		xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
-	};
-};
-
-&spi2 {
-	pinctrl-0 = <&spi2_pins>;
-	pinctrl-names = "default";
-	mediatek,pad-select = <0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-};
-
-&spmi {
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	mt6315_6: pmic@6 {
-		compatible = "mediatek,mt6315-regulator";
-		reg = <0x6 SPMI_USID>;
-
-		regulators {
-			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
-				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1193750>;
-				regulator-enable-ramp-delay = <256>;
-				regulator-allowed-modes = <0 1 2>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	mt6315_7: pmic@7 {
-		compatible = "mediatek,mt6315-regulator";
-		reg = <0x7 SPMI_USID>;
-
-		regulators {
-			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
-				regulator-name = "Vgpu";
-				regulator-min-microvolt = <546000>;
-				regulator-max-microvolt = <787000>;
-				regulator-enable-ramp-delay = <256>;
-				regulator-allowed-modes = <0 1 2>;
-			};
-		};
-	};
-};
-
-&u3phy0 {
-	status = "okay";
-};
-
-&u3phy1 {
-	status = "okay";
-
-	u3port1: usb-phy@700 {
-		mediatek,force-mode;
-	};
-};
-
-&u3phy2 {
-	status = "okay";
-};
-
-&u3phy3 {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-0 = <&uart1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&ufsphy {
-	status = "disabled";
-};
-
-&ssusb0 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-};
-
-&ssusb2 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-};
-
-&ssusb3 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-};
-
-&xhci0 {
-	status = "okay";
-};
-
-&xhci1 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-};
-
-&xhci2 {
-	status = "okay";
-};
-
-&xhci3 {
-	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi
new file mode 100644
index 000000000000..2b7167804e71
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi
@@ -0,0 +1,1230 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Ben Lok <ben.lok@mediatek.com>
+ *	   Macpaul Lin <macpaul.lin@mediatek.com>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &eth;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x2 0x00000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+
+	backlight_lcm0: backlight-lcm0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		num-interpolated-steps = <1023>;
+		pwms = <&disp_pwm0 0 500000>;
+	};
+
+	backlight_lcd1: backlight-lcd1 {
+		compatible = "pwm-backlight";
+		pwms = <&disp_pwm1 0 500000>;
+		enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+		status = "disabled";
+	};
+
+	can_clk: can-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "can-clk";
+	};
+
+	edp_panel_fixed_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_panel_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_3v3_en_pins>;
+	};
+
+	edp_panel_fixed_12v: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_backlight_12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		gpio = <&pio 96 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_12v_en_pins>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-volume-up {
+			wakeup-source;
+			debounce-interval = <100>;
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	lcm0_iovcc: regulator-vio18-lcm0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio18_lcm0";
+		enable-active-high;
+		gpio = <&pio 47 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_vreg_en_pins>;
+		vin-supply = <&mt6360_ldo2>;
+	};
+
+	lcm0_vddp: regulator-vsys-lcm0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_lcm0";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&mt6360_ldo1>;
+	};
+
+	wifi_fixed_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&dither0_in {
+	remote-endpoint = <&gamma0_out>;
+};
+
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&dmic_codec {
+	wakeup-delay-ms = <200>;
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd070fhfid078", "himax,hx8279";
+		reg = <0>;
+		backlight = <&backlight_lcm0>;
+		enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&lcm0_iovcc>;
+		vdd-supply = <&lcm0_vddp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+};
+
+&eth {
+	phy-mode ="rgmii-rxid";
+	phy-handle = <&eth_phy0>;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 10000>;
+	mediatek,tx-delay-ps = <2030>;
+	mediatek,mac-wol;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		eth_phy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+		};
+	};
+};
+
+&gamma0_out {
+	remote-endpoint = <&dither0_in>;
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&mt6360_ldo1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+		vcc-supply = <&mt6359_vibr_ldo_reg>;
+		mode-switch;
+		orientation-switch;
+		status = "okay";
+
+		port {
+			it5205_sbu_ep: endpoint {
+				remote-endpoint = <&mt6360_ssusb_sbu_ep>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		pinctrl-0 = <&mt6360_pins>;
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "tp1_p3v0";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			/* This is a measure point, which name is mt6360_ldo1 on schematic */
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+
+		tcpc {
+			compatible = "mediatek,mt6360-tcpc";
+			interrupts-extended = <&pio 17 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "PD_IRQB";
+
+			connector {
+				compatible = "usb-c-connector";
+				label = "USB-C";
+				data-role = "dual";
+				op-sink-microwatt = <10000000>;
+				power-role = "dual";
+				try-power-role = "sink";
+
+				source-pdos = <PDO_FIXED(5000, 1000,
+							 PDO_FIXED_DUAL_ROLE |
+							 PDO_FIXED_DATA_SWAP)>;
+				sink-pdos = <PDO_FIXED(5000, 2000,
+						       PDO_FIXED_DUAL_ROLE |
+						       PDO_FIXED_DATA_SWAP)>;
+
+				pd-revision = /bits/ 8 <0x03 0x01 0x01 0x06>;
+
+				altmodes {
+					displayport {
+						svid = /bits/ 16 <0xff01>;
+						vdo = <0x00001c46>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						typec_con_hs: endpoint {
+							remote-endpoint = <&mtu3_hs0_role_sw>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						typec_con_ss: endpoint {
+							remote-endpoint = <&mtu3_ss0_role_sw>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						mt6360_ssusb_sbu_ep: endpoint {
+							remote-endpoint = <&it5205_sbu_ep>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x14c11>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+	non-removable;
+};
+
+&mt6359_vaud18_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+/* For USB Hub */
+&mt6359_vcamio_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
+&mt6359codec {
+	mediatek,mic-type-0 = <1>; /* ACC */
+	mediatek,mic-type-1 = <3>; /* DCC */
+	mediatek,mic-type-2 = <1>; /* ACC */
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&pcie0 {
+	pinctrl-names = "default", "idle";
+	pinctrl-0 = <&pcie0_default_pins>;
+	pinctrl-1 = <&pcie0_idle_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_pins>;
+	status = "disabled";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>,
+				 <PINMUX_GPIO62__FUNC_DMIC1_DAT>,
+				 <PINMUX_GPIO65__FUNC_PCM_DO>,
+				 <PINMUX_GPIO66__FUNC_PCM_CLK>,
+				 <PINMUX_GPIO67__FUNC_PCM_DI>,
+				 <PINMUX_GPIO68__FUNC_PCM_SYNC>,
+				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	disp_pwm1_default_pins: disp-pwm1-default-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>;
+		};
+	};
+
+	edp_panel_12v_en_pins: edp-panel-12v-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-high;
+		};
+	};
+
+	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			output-high;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			input-disable;
+			bias-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+	};
+
+	gpio_key_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength = <6>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mt6360_pins: mt6360-pins {
+		pins {
+			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
+				 <PINMUX_GPIO128__FUNC_GPIO128>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
+		pins-pwr-en {
+			pinmux = <PINMUX_GPIO47__FUNC_GPIO47>;
+			output-low;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
+			output-high;
+		};
+
+		pins-en {
+			pinmux = <PINMUX_GPIO48__FUNC_GPIO48>;
+			output-low;
+		};
+	};
+
+	pcie0_default_pins: pcie0-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_idle_pins: pcie0-idle-pins {
+		pins {
+			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
+			bias-disable;
+			output-low;
+		};
+	};
+
+	pcie1_default_pins: pcie1-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
+			bias-pull-up;
+		};
+	};
+
+	disp_pwm0_pins: disp-pwm0-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi-pins {
+		pins {
+			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
+				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
+				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
+				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
+			bias-disable;
+		};
+	};
+
+	touch_pins: touch-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
+			output-high;
+		};
+	};
+
+	u3_p0_vbus: u3-p0-vbus-default-pins {
+		pins-vbus {
+			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
+			input-enable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO100__FUNC_URTS1>,
+				 <PINMUX_GPIO101__FUNC_UCTS1>,
+				 <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	firmware-name = "mediatek/mt8195/scp.img";
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359";
+	model = "mt8395-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R";
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	headphone-dai-link {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
+
+	can0: can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		clocks = <&can_clk>;
+		spi-max-frequency = <20000000>;
+		interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+	};
+};
+
+&spi2 {
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <546000>;
+				regulator-max-microvolt = <787000>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+
+	u3port1: usb-phy@700 {
+		mediatek,force-mode;
+	};
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&u3phy3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ufsphy {
+	status = "disabled";
+};
+
+&ssusb0 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&u3_p0_vbus>;
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			mtu3_hs0_role_sw: endpoint {
+				remote-endpoint = <&typec_con_hs>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			mtu3_ss0_role_sw: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+};
+
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
+
+&xhci3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
index e2e75b8ff918..d16f545cbbb2 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
@@ -271,6 +271,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth_default_pins>;
 	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
 	status = "okay";
 
 	mdio {
@@ -351,7 +352,7 @@
 			LDO_VIN2-supply = <&vsys>;
 			LDO_VIN3-supply = <&vsys>;
 
-			mt6360_buck1: BUCK1 {
+			mt6360_buck1: buck1 {
 				regulator-name = "emi_vdd2";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <1800000>;
@@ -361,7 +362,7 @@
 				regulator-always-on;
 			};
 
-			mt6360_buck2: BUCK2 {
+			mt6360_buck2: buck2 {
 				regulator-name = "emi_vddq";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -371,7 +372,7 @@
 				regulator-always-on;
 			};
 
-			mt6360_ldo1: LDO1 {
+			mt6360_ldo1: ldo1 {
 				regulator-name = "mt6360_ldo1"; /* Test point */
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -379,7 +380,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo2: LDO2 {
+			mt6360_ldo2: ldo2 {
 				regulator-name = "panel1_p1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -387,7 +388,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo3: LDO3 {
+			mt6360_ldo3: ldo3 {
 				regulator-name = "vmc_pmu";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -395,7 +396,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo5: LDO5 {
+			mt6360_ldo5: ldo5 {
 				regulator-name = "vmch_pmu";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -403,7 +404,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo6: LDO6 {
+			mt6360_ldo6: ldo6 {
 				regulator-name = "mt6360_ldo6"; /* Test point */
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@@ -411,7 +412,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo7: LDO7 {
+			mt6360_ldo7: ldo7 {
 				regulator-name = "emi_vmddr_en";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso
new file mode 100644
index 000000000000..0389c9cb8581
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l-8-hd-panel.dtso
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Radxa Display 8 HD touchscreen module
+ * Copyright (C) 2025 Collabora Ltd.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&backlight {
+	status = "okay";
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_default_pins>;
+	status = "okay";
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "radxa,display-8hd-ad002", "jadard,jd9365da-h3";
+		reg = <0>;
+		backlight = <&backlight>;
+		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		vccio-supply = <&mt6360_ldo2>;
+		reset-gpios = <&pio 108 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_default_pins>;
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&dsi0_out {
+	remote-endpoint = <&dsi_panel_in>;
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&ovl0_in {
+	remote-endpoint = <&vdosys0_ep_main>;
+};
+
+&vdosys0 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys0_ep_main: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ovl0_in>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index 14ec970c4e49..d32f973f5e05 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -8,6 +8,7 @@
 #include "mt8195.dtsi"
 #include "mt6359.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
@@ -48,6 +49,30 @@
 		reg = <0 0x40000000 0x1 0x0>;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsi0_backlight_pins>;
+		pwms = <&disp_pwm0 0 500000>;
+		status = "disabled";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-volume-up {
+			wakeup-source;
+			debounce-interval = <100>;
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
 	wifi_vreg: regulator-wifi-3v3-en {
 		compatible = "regulator-fixed";
 		regulator-name = "wifi_3v3_en";
@@ -127,9 +152,21 @@
 			no-map;
 		};
 
-		afe_mem: memory@60000000 {
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
 			compatible = "shared-dma-pool";
-			reg = <0 0x60000000 0 0x1100000>;
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
 			no-map;
 		};
 
@@ -140,6 +177,16 @@
 	};
 };
 
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&mt6359_vcore_buck_reg>;
 };
@@ -172,6 +219,32 @@
 	cpu-supply = <&mt6315_6_vbuck1>;
 };
 
+&dither0_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+				remote-endpoint = <&dither0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint { };
+		};
+	};
+};
+
 &eth {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&rgmii_phy>;
@@ -476,6 +549,25 @@
 &pio {
 	mediatek,rsel-resistance-in-si-unit;
 
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	dsi0_backlight_pins: dsi0-backlight-pins {
+		pins-backlight-en {
+			pinmux = <PINMUX_GPIO107__FUNC_GPIO107>;
+			output-high;
+		};
+	};
+
 	eth_default_pins: eth-default-pins {
 		pins-cc {
 			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
@@ -547,6 +639,14 @@
 		};
 	};
 
+	gpio_key_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
 	i2c2_pins: i2c2-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
@@ -673,6 +773,13 @@
 		};
 	};
 
+	panel_default_pins: panel-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
+			bias-pull-up;
+		};
+	};
+
 	pcie0_default_pins: pcie0-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
@@ -691,6 +798,12 @@
 		};
 	};
 
+	pwm0_default_pins: pwm0-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
 	spi1_pins: spi1-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
@@ -711,6 +824,19 @@
 		};
 	};
 
+	touch_pins: touch-pins {
+		pins-touch-int {
+			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-touch-rst {
+			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
+			output-high;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
@@ -775,13 +901,49 @@
 
 &pmic {
 	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
 };
 
 &scp {
 	memory-region = <&scp_mem>;
+	firmware-name = "mediatek/mt8195/scp.img";
 	status = "okay";
 };
 
+&sound {
+	compatible = "mediatek,mt8195_mt6359";
+	model = "mt8395-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R";
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	headphone-dai-link {
+		link-name = "DL_SRC_BE";
+
+		codec {
+			sound-dai = <&pmic 0>;
+		};
+	};
+};
+
 &spi1 {
 	/* Exposed at 40 pin connector */
 	pinctrl-0 = <&spi1_pins>;
@@ -812,7 +974,6 @@
 
 		regulators {
 			mt6315_6_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
@@ -829,7 +990,6 @@
 
 		regulators {
 			mt6315_7_vbuck1: vbuck1 {
-				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1193750>;
@@ -866,6 +1026,16 @@
 	status = "okay";
 };
 
+&ufshci {
+	vcc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vccq2-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+&ufsphy {
+	status = "okay";
+};
+
 &ssusb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb3_port0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
index cce642c53812..3d3db33a64dc 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "Pumpkin MT8516";
-	compatible = "mediatek,mt8516";
+	compatible = "mediatek,mt8516-pumpkin", "mediatek,mt8516";
 
 	memory@40000000 {
 		device_type = "memory";
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index d0b03dc4d3f4..b5e753759465 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -144,10 +144,10 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_reserved: secmon@43000000 {
 			no-map;
-			reg = <0 0x43000000 0 0x20000>;
+			reg = <0 0x43000000 0 0x30000>;
 		};
 	};
 
@@ -206,7 +206,7 @@
 			compatible = "mediatek,mt8516-wdt",
 				     "mediatek,mt6589-wdt";
 			reg = <0 0x10007000 0 0x1000>;
-			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
 			#reset-cells = <1>;
 		};
 
@@ -220,6 +220,17 @@
 			clock-names = "clk13m", "bus";
 		};
 
+		keypad: keypad@10002000 {
+			compatible = "mediatek,mt8516-keypad",
+				     "mediatek,mt6779-keypad";
+			reg = <0 0x10002000 0 0x1000>;
+			wakeup-source;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
 		syscfg_pctl: syscfg-pctl@10005000 {
 			compatible = "syscon";
 			reg = <0 0x10005000 0 0x1000>;
@@ -268,7 +279,7 @@
 			interrupt-parent = <&gic>;
 			interrupt-controller;
 			reg = <0 0x10310000 0 0x1000>,
-			      <0 0x10320000 0 0x1000>,
+			      <0 0x1032f000 0 0x2000>,
 			      <0 0x10340000 0 0x2000>,
 			      <0 0x10360000 0 0x2000>;
 			interrupts = <GIC_PPI 9
@@ -344,6 +355,7 @@
 			reg = <0 0x11009000 0 0x90>,
 			      <0 0x11000180 0 0x80>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C0>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -358,6 +370,7 @@
 			reg = <0 0x1100a000 0 0x90>,
 			      <0 0x11000200 0 0x80>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C1>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
@@ -372,6 +385,7 @@
 			reg = <0 0x1100b000 0 0x90>,
 			      <0 0x11000280 0 0x80>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <2>;
 			clocks = <&topckgen CLK_TOP_I2C2>,
 				 <&topckgen CLK_TOP_APDMA>;
 			clock-names = "main", "dma";
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index ec8dfb3d1c6d..805fb82138a8 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -47,7 +47,6 @@
 };
 
 &i2c0 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
@@ -156,7 +155,6 @@
 };
 
 &i2c2 {
-	clock-div = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
@@ -200,8 +198,8 @@
 };
 
 &pio {
-	gpio_keys_default: gpiodefault {
-		pins_cmd_dat {
+	gpio_keys_default: gpio-keys-pins {
+		pins-cmd-dat {
 			pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
 				 <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
 			bias-pull-up;
@@ -209,7 +207,7 @@
 		};
 	};
 
-	i2c0_pins_a: i2c0 {
+	i2c0_pins_a: i2c0-pins {
 		pins1 {
 			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
 				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -217,7 +215,7 @@
 		};
 	};
 
-	i2c2_pins_a: i2c2 {
+	i2c2_pins_a: i2c2-pins {
 		pins1 {
 			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
 				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
@@ -225,21 +223,21 @@
 		};
 	};
 
-	tca6416_pins: pinmux_tca6416_pins {
-		gpio_mux_rst_n_pin {
+	tca6416_pins: tca6416-pins {
+		pins-mux-rstn {
 			pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
 			output-high;
 		};
 
-		gpio_mux_int_n_pin {
+		pins-mux-intn {
 			pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
 			input-enable;
 			bias-pull-up;
 		};
 	};
 
-	ethernet_pins_default: ethernet {
-		pins_ethernet {
+	ethernet_pins_default: ethernet-pins {
+		pins-eth {
 			pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
 				 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
 				 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
index 32bb76b3202a..83bf5c81b5f7 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -12,10 +12,12 @@
 
 &cpu0 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu1 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &uart0 {
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
index ecd171b2feba..24133528b8e9 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@@ -32,11 +32,6 @@
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#address-cells = <0>;
-			ppi-partitions {
-				ppi_cluster0: interrupt-partition-0 {
-					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
-				};
-			};
 		};
 	};
 
@@ -47,17 +42,13 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		rstc: reset-controller@f0801000 {
+		clk: rstc: reset-controller@f0801000 {
 			compatible = "nuvoton,npcm845-reset";
-			reg = <0x0 0xf0801000 0x0 0x78>;
-			#reset-cells = <2>;
+			reg = <0x0 0xf0801000 0x0 0xC4>;
 			nuvoton,sysgcr = <&gcr>;
-		};
-
-		clk: clock-controller@f0801000 {
-			compatible = "nuvoton,npcm845-clk";
+			#reset-cells = <2>;
+			clocks = <&refclk>;
 			#clock-cells = <1>;
-			reg = <0x0 0xf0801000 0x0 0x1000>;
 		};
 
 		apb {
@@ -81,7 +72,7 @@
 				compatible = "nuvoton,npcm845-timer";
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x8000 0x1C>;
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				clock-names = "refclk";
 			};
 
@@ -153,7 +144,7 @@
 				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x801c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 
@@ -162,7 +153,7 @@
 				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x901c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 
@@ -171,9 +162,723 @@
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xa01c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 		};
 	};
+
+	pinctrl: pinctrl@f0010000 {
+		compatible = "nuvoton,npcm845-pinctrl";
+		ranges = <0x0 0x0 0xf0010000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nuvoton,sysgcr = <&gcr>;
+		status = "okay";
+		gpio0: gpio@f0010000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x0 0xB0>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+		};
+		gpio1: gpio@f0011000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x1000 0xB0>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 32 32>;
+		};
+		gpio2: gpio@f0012000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x2000 0xB0>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+		};
+		gpio3: gpio@f0013000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x3000 0xB0>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 96 32>;
+		};
+		gpio4: gpio@f0014000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x4000 0xB0>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+		};
+		gpio5: gpio@f0015000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x5000 0xB0>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 160 32>;
+		};
+		gpio6: gpio@f0016000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x6000 0xB0>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 192 32>;
+		};
+		gpio7: gpio@f0017000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x7000 0xB0>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 224 32>;
+		};
+
+		iox1_pins: iox1-mux {
+			groups = "iox1";
+			function = "iox1";
+		};
+		iox2_pins: iox2-mux {
+			groups = "iox2";
+			function = "iox2";
+		};
+		smb1d_pins: smb1d-mux {
+			groups = "smb1d";
+			function = "smb1d";
+		};
+		smb2d_pins: smb2d-mux {
+			groups = "smb2d";
+			function = "smb2d";
+		};
+		lkgpo1_pins: lkgpo1-mux {
+			groups = "lkgpo1";
+			function = "lkgpo1";
+		};
+		lkgpo2_pins: lkgpo2-mux {
+			groups = "lkgpo2";
+			function = "lkgpo2";
+		};
+		ioxh_pins: ioxh-mux {
+			groups = "ioxh";
+			function = "ioxh";
+		};
+		gspi_pins: gspi-mux {
+			groups = "gspi";
+			function = "gspi";
+		};
+		smb5b_pins: smb5b-mux {
+			groups = "smb5b";
+			function = "smb5b";
+		};
+		smb5c_pins: smb5c-mux {
+			groups = "smb5c";
+			function = "smb5c";
+		};
+		lkgpo0_pins: lkgpo0-mux {
+			groups = "lkgpo0";
+			function = "lkgpo0";
+		};
+		pspi_pins: pspi-mux {
+			groups = "pspi";
+			function = "pspi";
+		};
+		jm1_pins: jm1-mux {
+			groups = "jm1";
+			function = "jm1";
+		};
+		jm2_pins: jm2-mux {
+			groups = "jm2";
+			function = "jm2";
+		};
+		smb4b_pins: smb4b-mux {
+			groups = "smb4b";
+			function = "smb4b";
+		};
+		smb4c_pins: smb4c-mux {
+			groups = "smb4c";
+			function = "smb4c";
+		};
+		smb15_pins: smb15-mux {
+			groups = "smb15";
+			function = "smb15";
+		};
+		smb16_pins: smb16-mux {
+			groups = "smb16";
+			function = "smb16";
+		};
+		smb17_pins: smb17-mux {
+			groups = "smb17";
+			function = "smb17";
+		};
+		smb18_pins: smb18-mux {
+			groups = "smb18";
+			function = "smb18";
+		};
+		smb19_pins: smb19-mux {
+			groups = "smb19";
+			function = "smb19";
+		};
+		smb20_pins: smb20-mux {
+			groups = "smb20";
+			function = "smb20";
+		};
+		smb21_pins: smb21-mux {
+			groups = "smb21";
+			function = "smb21";
+		};
+		smb22_pins: smb22-mux {
+			groups = "smb22";
+			function = "smb22";
+		};
+		smb23_pins: smb23-mux {
+			groups = "smb23";
+			function = "smb23";
+		};
+		smb23b_pins: smb23b-mux {
+			groups = "smb23b";
+			function = "smb23b";
+		};
+		smb4d_pins: smb4d-mux {
+			groups = "smb4d";
+			function = "smb4d";
+		};
+		smb14_pins: smb14-mux {
+			groups = "smb14";
+			function = "smb14";
+		};
+		smb5_pins: smb5-mux {
+			groups = "smb5";
+			function = "smb5";
+		};
+		smb4_pins: smb4-mux {
+			groups = "smb4";
+			function = "smb4";
+		};
+		smb3_pins: smb3-mux {
+			groups = "smb3";
+			function = "smb3";
+		};
+		spi0cs1_pins: spi0cs1-mux {
+			groups = "spi0cs1";
+			function = "spi0cs1";
+		};
+		spi1cs0_pins: spi1cs0-mux {
+			groups = "spi1cs0";
+			function = "spi1cs0";
+		};
+		spi1cs1_pins: spi1cs1-mux {
+			groups = "spi1cs1";
+			function = "spi1cs1";
+		};
+		spi1cs2_pins: spi1cs2-mux {
+			groups = "spi1cs2";
+			function = "spi1cs2";
+		};
+		spi1cs3_pins: spi1cs3-mux {
+			groups = "spi1cs3";
+			function = "spi1cs3";
+		};
+		smb3c_pins: smb3c-mux {
+			groups = "smb3c";
+			function = "smb3c";
+		};
+		smb3b_pins: smb3b-mux {
+			groups = "smb3b";
+			function = "smb3b";
+		};
+		bmcuart0a_pins: bmcuart0a-mux {
+			groups = "bmcuart0a";
+			function = "bmcuart0a";
+		};
+		uart1_pins: uart1-mux {
+			groups = "uart1";
+			function = "uart1";
+		};
+		jtag2_pins: jtag2-mux {
+			groups = "jtag2";
+			function = "jtag2";
+		};
+		bmcuart1_pins: bmcuart1-mux {
+			groups = "bmcuart1";
+			function = "bmcuart1";
+		};
+		uart2_pins: uart2-mux {
+			groups = "uart2";
+			function = "uart2";
+		};
+		bmcuart0b_pins: bmcuart0b-mux {
+			groups = "bmcuart0b";
+			function = "bmcuart0b";
+		};
+		r1err_pins: r1err-mux {
+			groups = "r1err";
+			function = "r1err";
+		};
+		r1md_pins: r1md-mux {
+			groups = "r1md";
+			function = "r1md";
+		};
+		r1oen_pins: r1oen-mux {
+			groups = "r1oen";
+			function = "r1oen";
+		};
+		r2oen_pins: r2oen-mux {
+			groups = "r2oen";
+			function = "r2oen";
+		};
+		rmii3_pins: rmii3-mux {
+			groups = "rmii3";
+			function = "rmii3";
+		};
+		r3oen_pins: r3oen-mux {
+			groups = "r3oen";
+			function = "r3oen";
+		};
+		smb3d_pins: smb3d-mux {
+			groups = "smb3d";
+			function = "smb3d";
+		};
+		fanin0_pins: fanin0-mux {
+			groups = "fanin0";
+			function = "fanin0";
+		};
+		fanin1_pins: fanin1-mux {
+			groups = "fanin1";
+			function = "fanin1";
+		};
+		fanin2_pins: fanin2-mux {
+			groups = "fanin2";
+			function = "fanin2";
+		};
+		fanin3_pins: fanin3-mux {
+			groups = "fanin3";
+			function = "fanin3";
+		};
+		fanin4_pins: fanin4-mux {
+			groups = "fanin4";
+			function = "fanin4";
+		};
+		fanin5_pins: fanin5-mux {
+			groups = "fanin5";
+			function = "fanin5";
+		};
+		fanin6_pins: fanin6-mux {
+			groups = "fanin6";
+			function = "fanin6";
+		};
+		fanin7_pins: fanin7-mux {
+			groups = "fanin7";
+			function = "fanin7";
+		};
+		fanin8_pins: fanin8-mux {
+			groups = "fanin8";
+			function = "fanin8";
+		};
+		fanin9_pins: fanin9-mux {
+			groups = "fanin9";
+			function = "fanin9";
+		};
+		fanin10_pins: fanin10-mux {
+			groups = "fanin10";
+			function = "fanin10";
+		};
+		fanin11_pins: fanin11-mux {
+			groups = "fanin11";
+			function = "fanin11";
+		};
+		fanin12_pins: fanin12-mux {
+			groups = "fanin12";
+			function = "fanin12";
+		};
+		fanin13_pins: fanin13-mux {
+			groups = "fanin13";
+			function = "fanin13";
+		};
+		fanin14_pins: fanin14-mux {
+			groups = "fanin14";
+			function = "fanin14";
+		};
+		fanin15_pins: fanin15-mux {
+			groups = "fanin15";
+			function = "fanin15";
+		};
+		pwm0_pins: pwm0-mux {
+			groups = "pwm0";
+			function = "pwm0";
+		};
+		pwm1_pins: pwm1-mux {
+			groups = "pwm1";
+			function = "pwm1";
+		};
+		pwm2_pins: pwm2-mux {
+			groups = "pwm2";
+			function = "pwm2";
+		};
+		pwm3_pins: pwm3-mux {
+			groups = "pwm3";
+			function = "pwm3";
+		};
+		r2_pins: r2-mux {
+			groups = "r2";
+			function = "r2";
+		};
+		r2err_pins: r2err-mux {
+			groups = "r2err";
+			function = "r2err";
+		};
+		r2md_pins: r2md-mux {
+			groups = "r2md";
+			function = "r2md";
+		};
+		r3rxer_pins: r3rxer-mux {
+			groups = "r3rxer";
+			function = "r3rxer";
+		};
+		ga20kbc_pins: ga20kbc-mux {
+			groups = "ga20kbc";
+			function = "ga20kbc";
+		};
+		smb5d_pins: smb5d-mux {
+			groups = "smb5d";
+			function = "smb5d";
+		};
+		lpc_pins: lpc-mux {
+			groups = "lpc";
+			function = "lpc";
+		};
+		espi_pins: espi-mux {
+			groups = "espi";
+			function = "espi";
+		};
+		sg1mdio_pins: sg1mdio-mux {
+			groups = "sg1mdio";
+			function = "sg1mdio";
+		};
+		rg2_pins: rg2-mux {
+			groups = "rg2";
+			function = "rg2";
+		};
+		ddr_pins: ddr-mux {
+			groups = "ddr";
+			function = "ddr";
+		};
+		i3c0_pins: i3c0-mux {
+			groups = "i3c0";
+			function = "i3c0";
+		};
+		i3c1_pins: i3c1-mux {
+			groups = "i3c1";
+			function = "i3c1";
+		};
+		i3c2_pins: i3c2-mux {
+			groups = "i3c2";
+			function = "i3c2";
+		};
+		i3c3_pins: i3c3-mux {
+			groups = "i3c3";
+			function = "i3c3";
+		};
+		i3c4_pins: i3c4-mux {
+			groups = "i3c4";
+			function = "i3c4";
+		};
+		i3c5_pins: i3c5-mux {
+			groups = "i3c5";
+			function = "i3c5";
+		};
+		smb0_pins: smb0-mux {
+			groups = "smb0";
+			function = "smb0";
+		};
+		smb1_pins: smb1-mux {
+			groups = "smb1";
+			function = "smb1";
+		};
+		smb2_pins: smb2-mux {
+			groups = "smb2";
+			function = "smb2";
+		};
+		smb2c_pins: smb2c-mux {
+			groups = "smb2c";
+			function = "smb2c";
+		};
+		smb2b_pins: smb2b-mux {
+			groups = "smb2b";
+			function = "smb2b";
+		};
+		smb1c_pins: smb1c-mux {
+			groups = "smb1c";
+			function = "smb1c";
+		};
+		smb1b_pins: smb1b-mux {
+			groups = "smb1b";
+			function = "smb1b";
+		};
+		smb8_pins: smb8-mux {
+			groups = "smb8";
+			function = "smb8";
+		};
+		smb9_pins: smb9-mux {
+			groups = "smb9";
+			function = "smb9";
+		};
+		smb10_pins: smb10-mux {
+			groups = "smb10";
+			function = "smb10";
+		};
+		smb11_pins: smb11-mux {
+			groups = "smb11";
+			function = "smb11";
+		};
+		sd1_pins: sd1-mux {
+			groups = "sd1";
+			function = "sd1";
+		};
+		sd1pwr_pins: sd1pwr-mux {
+			groups = "sd1pwr";
+			function = "sd1pwr";
+		};
+		pwm4_pins: pwm4-mux {
+			groups = "pwm4";
+			function = "pwm4";
+		};
+		pwm5_pins: pwm5-mux {
+			groups = "pwm5";
+			function = "pwm5";
+		};
+		pwm6_pins: pwm6-mux {
+			groups = "pwm6";
+			function = "pwm6";
+		};
+		pwm7_pins: pwm7-mux {
+			groups = "pwm7";
+			function = "pwm7";
+		};
+		pwm8_pins: pwm8-mux {
+			groups = "pwm8";
+			function = "pwm8";
+		};
+		pwm9_pins: pwm9-mux {
+			groups = "pwm9";
+			function = "pwm9";
+		};
+		pwm10_pins: pwm10-mux {
+			groups = "pwm10";
+			function = "pwm10";
+		};
+		pwm11_pins: pwm11-mux {
+			groups = "pwm11";
+			function = "pwm11";
+		};
+		mmc8_pins: mmc8-mux {
+			groups = "mmc8";
+			function = "mmc8";
+		};
+		mmc_pins: mmc-mux {
+			groups = "mmc";
+			function = "mmc";
+		};
+		mmcwp_pins: mmcwp-mux {
+			groups = "mmcwp";
+			function = "mmcwp";
+		};
+		mmccd_pins: mmccd-mux {
+			groups = "mmccd";
+			function = "mmccd";
+		};
+		mmcrst_pins: mmcrst-mux {
+			groups = "mmcrst";
+			function = "mmcrst";
+		};
+		clkout_pins: clkout-mux {
+			groups = "clkout";
+			function = "clkout";
+		};
+		serirq_pins: serirq-mux {
+			groups = "serirq";
+			function = "serirq";
+		};
+		scipme_pins: scipme-mux {
+			groups = "scipme";
+			function = "scipme";
+		};
+		smb6_pins: smb6-mux {
+			groups = "smb6";
+			function = "smb6";
+		};
+		smb6b_pins: smb6b-mux {
+			groups = "smb6b";
+			function = "smb6b";
+		};
+		smb6c_pins: smb6c-mux {
+			groups = "smb6c";
+			function = "smb6c";
+		};
+		smb6d_pins: smb6d-mux {
+			groups = "smb6d";
+			function = "smb6d";
+		};
+		smb7_pins: smb7-mux {
+			groups = "smb7";
+			function = "smb7";
+		};
+		smb7b_pins: smb7b-mux {
+			groups = "smb7b";
+			function = "smb7b";
+		};
+		smb7c_pins: smb7c-mux {
+			groups = "smb7c";
+			function = "smb7c";
+		};
+		smb7d_pins: smb7d-mux {
+			groups = "smb7d";
+			function = "smb7d";
+		};
+		spi1_pins: spi1-mux {
+			groups = "spi1";
+			function = "spi1";
+		};
+		faninx_pins: faninx-mux {
+			groups = "faninx";
+			function = "faninx";
+		};
+		r1_pins: r1-mux {
+			groups = "r1";
+			function = "r1";
+		};
+		spi3_pins: spi3-mux {
+			groups = "spi3";
+			function = "spi3";
+		};
+		spi3cs1_pins: spi3cs1-mux {
+			groups = "spi3cs1";
+			function = "spi3cs1";
+		};
+		spi3quad_pins: spi3quad-mux {
+			groups = "spi3quad";
+			function = "spi3quad";
+		};
+		spi3cs2_pins: spi3cs2-mux {
+			groups = "spi3cs2";
+			function = "spi3cs2";
+		};
+		spi3cs3_pins: spi3cs3-mux {
+			groups = "spi3cs3";
+			function = "spi3cs3";
+		};
+		nprd_smi_pins: nprd-smi-mux {
+			groups = "nprd_smi";
+			function = "nprd_smi";
+		};
+		smi_pins: smi-mux {
+			groups = "smi";
+			function = "smi";
+		};
+		smb0b_pins: smb0b-mux {
+			groups = "smb0b";
+			function = "smb0b";
+		};
+		smb0c_pins: smb0c-mux {
+			groups = "smb0c";
+			function = "smb0c";
+		};
+		smb0den_pins: smb0den-mux {
+			groups = "smb0den";
+			function = "smb0den";
+		};
+		smb0d_pins: smb0d-mux {
+			groups = "smb0d";
+			function = "smb0d";
+		};
+		ddc_pins: ddc-mux {
+			groups = "ddc";
+			function = "ddc";
+		};
+		rg2mdio_pins: rg2mdio-mux {
+			groups = "rg2mdio";
+			function = "rg2mdio";
+		};
+		wdog1_pins: wdog1-mux {
+			groups = "wdog1";
+			function = "wdog1";
+		};
+		wdog2_pins: wdog2-mux {
+			groups = "wdog2";
+			function = "wdog2";
+		};
+		smb12_pins: smb12-mux {
+			groups = "smb12";
+			function = "smb12";
+		};
+		smb13_pins: smb13-mux {
+			groups = "smb13";
+			function = "smb13";
+		};
+		spix_pins: spix-mux {
+			groups = "spix";
+			function = "spix";
+		};
+		spixcs1_pins: spixcs1-mux {
+			groups = "spixcs1";
+			function = "spixcs1";
+		};
+		clkreq_pins: clkreq-mux {
+			groups = "clkreq";
+			function = "clkreq";
+		};
+		hgpio0_pins: hgpio0-mux {
+			groups = "hgpio0";
+			function = "hgpio0";
+		};
+		hgpio1_pins: hgpio1-mux {
+			groups = "hgpio1";
+			function = "hgpio1";
+		};
+		hgpio2_pins: hgpio2-mux {
+			groups = "hgpio2";
+			function = "hgpio2";
+		};
+		hgpio3_pins: hgpio3-mux {
+			groups = "hgpio3";
+			function = "hgpio3";
+		};
+		hgpio4_pins: hgpio4-mux {
+			groups = "hgpio4";
+			function = "hgpio4";
+		};
+		hgpio5_pins: hgpio5-mux {
+			groups = "hgpio5";
+			function = "hgpio5";
+		};
+		hgpio6_pins: hgpio6-mux {
+			groups = "hgpio6";
+			function = "hgpio6";
+		};
+		hgpio7_pins: hgpio7-mux {
+			groups = "hgpio7";
+			function = "hgpio7";
+		};
+		bu4_pins: bu4-mux {
+			groups = "bu4";
+			function = "bu4";
+		};
+		bu4b_pins: bu4b-mux {
+			groups = "bu4b";
+			function = "bu4b";
+		};
+		bu5_pins: bu5-mux {
+			groups = "bu5";
+			function = "bu5";
+		};
+		bu5b_pins: bu5b-mux {
+			groups = "bu5b";
+			function = "bu5b";
+		};
+		bu6_pins: bu6-mux {
+			groups = "bu6";
+			function = "bu6";
+		};
+		gpo187_pins: gpo187-mux {
+			groups = "gpo187";
+			function = "gpo187";
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
index eeceb5b292a8..2638ee1c3846 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -19,6 +19,12 @@
 	memory@0 {
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	refclk: refclk-25mhz {
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		#clock-cells = <0>;
+	};
 };
 
 &serial0 {
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 0fbb8a494dba..b139cbd14442 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -3,6 +3,7 @@
 # Enables support for device-tree overlays
 DTC_FLAGS_tegra210-p2371-2180 := -@
 DTC_FLAGS_tegra210-p3450-0000 := -@
+DTC_FLAGS_tegra210-p3541-0000 := -@
 DTC_FLAGS_tegra186-p2771-0000 := -@
 DTC_FLAGS_tegra186-p3509-0000+p3636-0001 := -@
 DTC_FLAGS_tegra194-p2972-0000 := -@
@@ -12,12 +13,14 @@ DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@
 DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@
 DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@
 DTC_FLAGS_tegra234-p3768-0000+p3767-0005 := -@
+DTC_FLAGS_tegra264-p3971-0089+p3834-0008 := -@
 
 dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3541-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
 dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
@@ -31,3 +34,4 @@ dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0008.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3740-0002+p3701-0008.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0005.dtb
+dtb-$(CONFIG_ARCH_TEGRA_264_SOC) += tegra264-p3971-0089+p3834-0008.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 5bcccfef3f7f..26cd11a8a4a1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -175,6 +175,7 @@
 
 	gic: interrupt-controller@50041000 {
 		compatible = "arm,cortex-a15-gic";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x50041000 0x0 0x1000>,
@@ -271,7 +272,7 @@
 		interrupt-controller;
 	};
 
-	apbdma: dma@60020000 {
+	apbdma: dma-controller@60020000 {
 		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
 		reg = <0x0 0x60020000 0x0 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 15aa49fc4503..8b3736cee323 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -2394,6 +2394,12 @@
 		phy-names = "usb2-0";
 	};
 
+	cec@3960000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	i2c@c250000 {
 		/* carrier board ID EEPROM */
 		eeprom@57 {
@@ -2409,6 +2415,10 @@
 		};
 	};
 
+	pwm@c340000 {
+		status = "okay";
+	};
+
 	pcie@10003000 {
 		status = "okay";
 
@@ -2508,6 +2518,16 @@
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm4 0 45334>;
+		fan-supply = <&vdd_fan>;
+
+		/* cooling level (0, 1, 2, 3) - pwm inverted */
+		cooling-levels = <255 128 64 0>;
+		#cooling-cells = <2>;
+	};
+
 	vdd_sd: regulator-vdd-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "SD_CARD_SW_PWR";
@@ -2556,6 +2576,17 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
+	vdd_fan: regulator-vdd-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_FAN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&exp1 4 GPIO_ACTIVE_LOW>;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
 	sound {
 		compatible = "nvidia,tegra186-audio-graph-card";
 		status = "okay";
@@ -2621,4 +2652,88 @@
 
 		label = "NVIDIA Jetson TX2 APE";
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <79000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <62000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <45000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				map1 {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				map2 {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				map3 {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index e2d6857a3709..970ce5a03540 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -61,6 +61,8 @@
 	};
 
 	serial@3100000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -191,6 +193,10 @@
 		nvidia,invert-interrupt;
 	};
 
+	gpu@17000000 {
+		status = "okay";
+	};
+
 	bpmp {
 		i2c {
 			status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
index 26f71651933d..d9aafe053112 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -549,6 +549,8 @@
 	};
 
 	serial@3100000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -669,7 +671,6 @@
 					vbus-gpios = <&gpio
 						      TEGRA186_MAIN_GPIO(L, 4)
 						      GPIO_ACTIVE_LOW>;
-					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -712,6 +713,12 @@
 		phy-names = "usb2-0";
 	};
 
+	cec@3960000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	hsp@3c00000 {
 		status = "okay";
 	};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 2b3bb5d0af17..b00630451909 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -36,6 +36,12 @@
 		interrupt-controller;
 		#gpio-cells = <2>;
 		gpio-controller;
+		gpio-ranges = <&pinmux 0 0 140>;
+	};
+
+	pinmux: pinmux@2430000 {
+		compatible = "nvidia,tegra186-pinmux";
+		reg = <0x0 0x2430000 0x0 0x15000>;
 	};
 
 	ethernet@2490000 {
@@ -124,28 +130,28 @@
 			 <&bpmp TEGRA186_CLK_APB2APE>;
 		clock-names = "ape", "apb2ape";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x02900000 0x0 0x02900000 0x200000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x02900000 0x0 0x02900000 0x0 0x200000>;
 		status = "disabled";
 
 		tegra_ahub: ahub@2900800 {
 			compatible = "nvidia,tegra186-ahub";
-			reg = <0x02900800 0x800>;
+			reg = <0x0 0x02900800 0x0 0x800>;
 			clocks = <&bpmp TEGRA186_CLK_AHUB>;
 			clock-names = "ahub";
 			assigned-clocks = <&bpmp TEGRA186_CLK_AHUB>;
 			assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
 			assigned-clock-rates = <81600000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x02900800 0x02900800 0x11800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x02900800 0x0 0x02900800 0x0 0x11800>;
 			status = "disabled";
 
 			tegra_i2s1: i2s@2901000 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901000 0x100>;
+				reg = <0x0 0x2901000 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S1>,
 					 <&bpmp TEGRA186_CLK_I2S1_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -159,7 +165,7 @@
 			tegra_i2s2: i2s@2901100 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901100 0x100>;
+				reg = <0x0 0x2901100 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S2>,
 					 <&bpmp TEGRA186_CLK_I2S2_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -173,7 +179,7 @@
 			tegra_i2s3: i2s@2901200 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901200 0x100>;
+				reg = <0x0 0x2901200 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S3>,
 					 <&bpmp TEGRA186_CLK_I2S3_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -187,7 +193,7 @@
 			tegra_i2s4: i2s@2901300 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901300 0x100>;
+				reg = <0x0 0x2901300 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S4>,
 					 <&bpmp TEGRA186_CLK_I2S4_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -201,7 +207,7 @@
 			tegra_i2s5: i2s@2901400 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901400 0x100>;
+				reg = <0x0 0x2901400 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S5>,
 					 <&bpmp TEGRA186_CLK_I2S5_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -215,7 +221,7 @@
 			tegra_i2s6: i2s@2901500 {
 				compatible = "nvidia,tegra186-i2s",
 					     "nvidia,tegra210-i2s";
-				reg = <0x2901500 0x100>;
+				reg = <0x0 0x2901500 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_I2S6>,
 					 <&bpmp TEGRA186_CLK_I2S6_SYNC_INPUT>;
 				clock-names = "i2s", "sync_input";
@@ -229,7 +235,7 @@
 			tegra_sfc1: sfc@2902000 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902000 0x200>;
+				reg = <0x0 0x2902000 0x0 0x200>;
 				sound-name-prefix = "SFC1";
 				status = "disabled";
 			};
@@ -237,7 +243,7 @@
 			tegra_sfc2: sfc@2902200 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902200 0x200>;
+				reg = <0x0 0x2902200 0x0 0x200>;
 				sound-name-prefix = "SFC2";
 				status = "disabled";
 			};
@@ -245,7 +251,7 @@
 			tegra_sfc3: sfc@2902400 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902400 0x200>;
+				reg = <0x0 0x2902400 0x0 0x200>;
 				sound-name-prefix = "SFC3";
 				status = "disabled";
 			};
@@ -253,7 +259,7 @@
 			tegra_sfc4: sfc@2902600 {
 				compatible = "nvidia,tegra186-sfc",
 					     "nvidia,tegra210-sfc";
-				reg = <0x2902600 0x200>;
+				reg = <0x0 0x2902600 0x0 0x200>;
 				sound-name-prefix = "SFC4";
 				status = "disabled";
 			};
@@ -261,7 +267,7 @@
 			tegra_amx1: amx@2903000 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903000 0x100>;
+				reg = <0x0 0x2903000 0x0 0x100>;
 				sound-name-prefix = "AMX1";
 				status = "disabled";
 			};
@@ -269,7 +275,7 @@
 			tegra_amx2: amx@2903100 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903100 0x100>;
+				reg = <0x0 0x2903100 0x0 0x100>;
 				sound-name-prefix = "AMX2";
 				status = "disabled";
 			};
@@ -277,7 +283,7 @@
 			tegra_amx3: amx@2903200 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903200 0x100>;
+				reg = <0x0 0x2903200 0x0 0x100>;
 				sound-name-prefix = "AMX3";
 				status = "disabled";
 			};
@@ -285,7 +291,7 @@
 			tegra_amx4: amx@2903300 {
 				compatible = "nvidia,tegra186-amx",
 					     "nvidia,tegra210-amx";
-				reg = <0x2903300 0x100>;
+				reg = <0x0 0x2903300 0x0 0x100>;
 				sound-name-prefix = "AMX4";
 				status = "disabled";
 			};
@@ -293,7 +299,7 @@
 			tegra_adx1: adx@2903800 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903800 0x100>;
+				reg = <0x0 0x2903800 0x0 0x100>;
 				sound-name-prefix = "ADX1";
 				status = "disabled";
 			};
@@ -301,7 +307,7 @@
 			tegra_adx2: adx@2903900 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903900 0x100>;
+				reg = <0x0 0x2903900 0x0 0x100>;
 				sound-name-prefix = "ADX2";
 				status = "disabled";
 			};
@@ -309,7 +315,7 @@
 			tegra_adx3: adx@2903a00 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903a00 0x100>;
+				reg = <0x0 0x2903a00 0x0 0x100>;
 				sound-name-prefix = "ADX3";
 				status = "disabled";
 			};
@@ -317,14 +323,14 @@
 			tegra_adx4: adx@2903b00 {
 				compatible = "nvidia,tegra186-adx",
 					     "nvidia,tegra210-adx";
-				reg = <0x2903b00 0x100>;
+				reg = <0x0 0x2903b00 0x0 0x100>;
 				sound-name-prefix = "ADX4";
 				status = "disabled";
 			};
 
 			tegra_dmic1: dmic@2904000 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904000 0x100>;
+				reg = <0x0 0x2904000 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC1>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>;
@@ -336,7 +342,7 @@
 
 			tegra_dmic2: dmic@2904100 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904100 0x100>;
+				reg = <0x0 0x2904100 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC2>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>;
@@ -348,7 +354,7 @@
 
 			tegra_dmic3: dmic@2904200 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904200 0x100>;
+				reg = <0x0 0x2904200 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC3>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>;
@@ -360,7 +366,7 @@
 
 			tegra_dmic4: dmic@2904300 {
 				compatible = "nvidia,tegra210-dmic";
-				reg = <0x2904300 0x100>;
+				reg = <0x0 0x2904300 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DMIC4>;
 				clock-names = "dmic";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>;
@@ -372,7 +378,7 @@
 
 			tegra_dspk1: dspk@2905000 {
 				compatible = "nvidia,tegra186-dspk";
-				reg = <0x2905000 0x100>;
+				reg = <0x0 0x2905000 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DSPK1>;
 				clock-names = "dspk";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
@@ -384,7 +390,7 @@
 
 			tegra_dspk2: dspk@2905100 {
 				compatible = "nvidia,tegra186-dspk";
-				reg = <0x2905100 0x100>;
+				reg = <0x0 0x2905100 0x0 0x100>;
 				clocks = <&bpmp TEGRA186_CLK_DSPK2>;
 				clock-names = "dspk";
 				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>;
@@ -397,9 +403,9 @@
 			tegra_ope1: processing-engine@2908000 {
 				compatible = "nvidia,tegra186-ope",
 					     "nvidia,tegra210-ope";
-				reg = <0x2908000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
+				reg = <0x0 0x2908000 0x0 0x100>;
+				#address-cells = <2>;
+				#size-cells = <2>;
 				ranges;
 				sound-name-prefix = "OPE1";
 				status = "disabled";
@@ -407,20 +413,20 @@
 				equalizer@2908100 {
 					compatible = "nvidia,tegra186-peq",
 						     "nvidia,tegra210-peq";
-					reg = <0x2908100 0x100>;
+					reg = <0x0 0x2908100 0x0 0x100>;
 				};
 
 				dynamic-range-compressor@2908200 {
 					compatible = "nvidia,tegra186-mbdrc",
 						     "nvidia,tegra210-mbdrc";
-					reg = <0x2908200 0x200>;
+					reg = <0x0 0x2908200 0x0 0x200>;
 				};
 			};
 
 			tegra_mvc1: mvc@290a000 {
 				compatible = "nvidia,tegra186-mvc",
 					     "nvidia,tegra210-mvc";
-				reg = <0x290a000 0x200>;
+				reg = <0x0 0x290a000 0x0 0x200>;
 				sound-name-prefix = "MVC1";
 				status = "disabled";
 			};
@@ -428,7 +434,7 @@
 			tegra_mvc2: mvc@290a200 {
 				compatible = "nvidia,tegra186-mvc",
 					     "nvidia,tegra210-mvc";
-				reg = <0x290a200 0x200>;
+				reg = <0x0 0x290a200 0x0 0x200>;
 				sound-name-prefix = "MVC2";
 				status = "disabled";
 			};
@@ -436,14 +442,14 @@
 			tegra_amixer: amixer@290bb00 {
 				compatible = "nvidia,tegra186-amixer",
 					     "nvidia,tegra210-amixer";
-				reg = <0x290bb00 0x800>;
+				reg = <0x0 0x290bb00 0x0 0x800>;
 				sound-name-prefix = "MIXER1";
 				status = "disabled";
 			};
 
 			tegra_admaif: admaif@290f000 {
 				compatible = "nvidia,tegra186-admaif";
-				reg = <0x0290f000 0x1000>;
+				reg = <0x0 0x0290f000 0x0 0x1000>;
 				dmas = <&adma 1>, <&adma 1>,
 				       <&adma 2>, <&adma 2>,
 				       <&adma 3>, <&adma 3>,
@@ -489,7 +495,7 @@
 
 			tegra_asrc: asrc@2910000 {
 				compatible = "nvidia,tegra186-asrc";
-				reg = <0x2910000 0x2000>;
+				reg = <0x0 0x2910000 0x0 0x2000>;
 				sound-name-prefix = "ASRC1";
 				status = "disabled";
 			};
@@ -497,7 +503,7 @@
 
 		adma: dma-controller@2930000 {
 			compatible = "nvidia,tegra186-adma";
-			reg = <0x02930000 0x20000>;
+			reg = <0x0 0x02930000 0x0 0x20000>;
 			interrupt-parent = <&agic>;
 			interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -542,8 +548,8 @@
 				     "nvidia,tegra210-agic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
-			reg = <0x02a41000 0x1000>,
-			      <0x02a42000 0x2000>;
+			reg = <0x0 0x02a41000 0x0 0x1000>,
+			      <0x0 0x02a42000 0x0 0x2000>;
 			interrupts = <GIC_SPI 145
 				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&bpmp TEGRA186_CLK_APE>;
@@ -612,6 +618,8 @@
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTA>;
 		resets = <&bpmp TEGRA186_RESET_UARTA>;
+		dmas = <&gpcdma 8>, <&gpcdma 8>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -621,9 +629,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTB>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTB>;
-		reset-names = "serial";
+		dmas = <&gpcdma 9>, <&gpcdma 9>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -633,9 +641,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTD>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTD>;
-		reset-names = "serial";
+		dmas = <&gpcdma 19>, <&gpcdma 19>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -645,9 +653,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTE>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTE>;
-		reset-names = "serial";
+		dmas = <&gpcdma 20>, <&gpcdma 20>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -657,9 +665,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTF>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTF>;
-		reset-names = "serial";
+		dmas = <&gpcdma 12>, <&gpcdma 12>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1171,6 +1179,7 @@
 
 	gic: interrupt-controller@3881000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x03881000 0x0 0x1000>,
@@ -1183,7 +1192,7 @@
 	};
 
 	cec@3960000 {
-		compatible = "nvidia,tegra186-cec";
+		compatible = "nvidia,tegra186-cec", "nvidia,tegra210-cec";
 		reg = <0x0 0x03960000 0x0 0x10000>;
 		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_CEC>;
@@ -1236,9 +1245,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTC>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTC>;
-		reset-names = "serial";
+		dmas = <&gpcdma 3>, <&gpcdma 3>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1248,9 +1257,9 @@
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_UARTG>;
-		clock-names = "serial";
 		resets = <&bpmp TEGRA186_RESET_UARTG>;
-		reset-names = "serial";
+		dmas = <&gpcdma 2>, <&gpcdma 2>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -1272,10 +1281,16 @@
 		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-ranges = <&pinmux_aon 0 0 47>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
+	pinmux_aon: pinmux@c300000 {
+		compatible = "nvidia,tegra186-pinmux-aon";
+		reg = <0x0 0xc300000 0x0 0x4000>;
+	};
+
 	pwm4: pwm@c340000 {
 		compatible = "nvidia,tegra186-pwm";
 		reg = <0x0 0xc340000 0x0 0x10000>;
@@ -1511,10 +1526,10 @@
 		resets = <&bpmp TEGRA186_RESET_HOST1X>;
 		reset-names = "host1x";
 
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
-		ranges = <0x15000000 0x0 0x15000000 0x01000000>;
+		ranges = <0x0 0x15000000 0x0 0x15000000 0x0 0x01000000>;
 
 		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>;
 		interconnect-names = "dma-mem";
@@ -1533,7 +1548,7 @@
 
 		dpaux1: dpaux@15040000 {
 			compatible = "nvidia,tegra186-dpaux";
-			reg = <0x15040000 0x10000>;
+			reg = <0x0 0x15040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DPAUX1>,
 				 <&bpmp TEGRA186_CLK_PLLDP>;
@@ -1567,7 +1582,7 @@
 
 		display-hub@15200000 {
 			compatible = "nvidia,tegra186-display";
-			reg = <0x15200000 0x00040000>;
+			reg = <0x0 0x15200000 0x0 0x00040000>;
 			resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
@@ -1585,14 +1600,14 @@
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
 
-			ranges = <0x15200000 0x15200000 0x40000>;
+			ranges = <0x0 0x15200000 0x0 0x15200000 0x0 0x40000>;
 
 			display@15200000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15200000 0x10000>;
+				reg = <0x0 0x15200000 0x0 0x10000>;
 				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
 				clock-names = "dc";
@@ -1611,7 +1626,7 @@
 
 			display@15210000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15210000 0x10000>;
+				reg = <0x0 0x15210000 0x0 0x10000>;
 				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
 				clock-names = "dc";
@@ -1630,7 +1645,7 @@
 
 			display@15220000 {
 				compatible = "nvidia,tegra186-dc";
-				reg = <0x15220000 0x10000>;
+				reg = <0x0 0x15220000 0x0 0x10000>;
 				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
 				clock-names = "dc";
@@ -1650,7 +1665,7 @@
 
 		dsia: dsi@15300000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15300000 0x10000>;
+			reg = <0x0 0x15300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSI>,
 				 <&bpmp TEGRA186_CLK_DSIA_LP>,
@@ -1665,7 +1680,7 @@
 
 		vic@15340000 {
 			compatible = "nvidia,tegra186-vic";
-			reg = <0x15340000 0x40000>;
+			reg = <0x0 0x15340000 0x0 0x40000>;
 			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_VIC>;
 			clock-names = "vic";
@@ -1681,7 +1696,7 @@
 
 		nvjpg@15380000 {
 			compatible = "nvidia,tegra186-nvjpg";
-			reg = <0x15380000 0x40000>;
+			reg = <0x0 0x15380000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVJPG>;
 			clock-names = "nvjpg";
 			resets = <&bpmp TEGRA186_RESET_NVJPG>;
@@ -1696,7 +1711,7 @@
 
 		dsib: dsi@15400000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15400000 0x10000>;
+			reg = <0x0 0x15400000 0x0 0x10000>;
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSIB>,
 				 <&bpmp TEGRA186_CLK_DSIB_LP>,
@@ -1711,7 +1726,7 @@
 
 		nvdec@15480000 {
 			compatible = "nvidia,tegra186-nvdec";
-			reg = <0x15480000 0x40000>;
+			reg = <0x0 0x15480000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVDEC>;
 			clock-names = "nvdec";
 			resets = <&bpmp TEGRA186_RESET_NVDEC>;
@@ -1727,7 +1742,7 @@
 
 		nvenc@154c0000 {
 			compatible = "nvidia,tegra186-nvenc";
-			reg = <0x154c0000 0x40000>;
+			reg = <0x0 0x154c0000 0x0 0x40000>;
 			clocks = <&bpmp TEGRA186_CLK_NVENC>;
 			clock-names = "nvenc";
 			resets = <&bpmp TEGRA186_RESET_NVENC>;
@@ -1742,7 +1757,7 @@
 
 		sor0: sor@15540000 {
 			compatible = "nvidia,tegra186-sor";
-			reg = <0x15540000 0x10000>;
+			reg = <0x0 0x15540000 0x0 0x10000>;
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_SOR0>,
 				 <&bpmp TEGRA186_CLK_SOR0_OUT>,
@@ -1766,7 +1781,7 @@
 
 		sor1: sor@15580000 {
 			compatible = "nvidia,tegra186-sor";
-			reg = <0x15580000 0x10000>;
+			reg = <0x0 0x15580000 0x0 0x10000>;
 			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_SOR1>,
 				 <&bpmp TEGRA186_CLK_SOR1_OUT>,
@@ -1790,7 +1805,7 @@
 
 		dpaux: dpaux@155c0000 {
 			compatible = "nvidia,tegra186-dpaux";
-			reg = <0x155c0000 0x10000>;
+			reg = <0x0 0x155c0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DPAUX>,
 				 <&bpmp TEGRA186_CLK_PLLDP>;
@@ -1824,7 +1839,7 @@
 
 		padctl@15880000 {
 			compatible = "nvidia,tegra186-dsi-padctl";
-			reg = <0x15880000 0x10000>;
+			reg = <0x0 0x15880000 0x0 0x10000>;
 			resets = <&bpmp TEGRA186_RESET_DSI>;
 			reset-names = "dsi";
 			status = "disabled";
@@ -1832,7 +1847,7 @@
 
 		dsic: dsi@15900000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15900000 0x10000>;
+			reg = <0x0 0x15900000 0x0 0x10000>;
 			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSIC>,
 				 <&bpmp TEGRA186_CLK_DSIC_LP>,
@@ -1847,7 +1862,7 @@
 
 		dsid: dsi@15940000 {
 			compatible = "nvidia,tegra186-dsi";
-			reg = <0x15940000 0x10000>;
+			reg = <0x0 0x15940000 0x0 0x10000>;
 			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA186_CLK_DSID>,
 				 <&bpmp TEGRA186_CLK_DSID_LP>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index e8b296d9e0d3..43942db6eac9 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -104,6 +104,8 @@
 		};
 
 		serial@3110000 {
+			/delete-property/ dmas;
+			/delete-property/ dma-names;
 			status = "okay";
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index c32876699a43..ea6f397a2792 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -2121,6 +2121,12 @@
 			phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
 		};
 
+		cec@3960000 {
+			status = "okay";
+
+			hdmi-phandle = <&sor2>;
+		};
+
 		i2c@c240000 {
 			typec@8 {
 				compatible = "cypress,cypd4226";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
index 4a17ea5e40fd..16cf4414de59 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -2174,6 +2174,12 @@
 			phy-names = "usb2-1", "usb2-2", "usb3-2";
 		};
 
+		cec@3960000 {
+			status = "okay";
+
+			hdmi-phandle = <&sor1>;
+		};
+
 		host1x@13e00000 {
 			display-hub@15200000 {
 				status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
index 59860d19f0f6..c0f17f8189fa 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
@@ -42,6 +42,7 @@
 					interrupt-parent = <&gpio>;
 					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
 					#phy-cells = <0>;
+					wakeup-source;
 				};
 			};
 		};
@@ -78,6 +79,8 @@
 		};
 
 		serial@3100000 {
+			/delete-property/ dmas;
+			/delete-property/ dma-names;
 			status = "okay";
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 33f92b77cd9d..b782f8db1288 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -747,6 +747,8 @@
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTA>;
 			resets = <&bpmp TEGRA194_RESET_UARTA>;
+			dmas = <&gpcdma 8>, <&gpcdma 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -757,6 +759,8 @@
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTB>;
 			resets = <&bpmp TEGRA194_RESET_UARTB>;
+			dmas = <&gpcdma 9>, <&gpcdma 9>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -766,9 +770,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTD>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTD>;
-			reset-names = "serial";
+			dmas = <&gpcdma 19>, <&gpcdma 19>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -778,9 +782,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTE>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTE>;
-			reset-names = "serial";
+			dmas = <&gpcdma 20>, <&gpcdma 20>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -790,9 +794,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTF>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTF>;
-			reset-names = "serial";
+			dmas = <&gpcdma 12>, <&gpcdma 12>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -817,9 +821,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTH>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTH>;
-			reset-names = "serial";
+			dmas = <&gpcdma 13>, <&gpcdma 13>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -1327,6 +1331,7 @@
 
 		gic: interrupt-controller@3881000 {
 			compatible = "arm,gic-400";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0x03881000 0x0 0x1000>,
@@ -1339,7 +1344,7 @@
 		};
 
 		cec@3960000 {
-			compatible = "nvidia,tegra194-cec";
+			compatible = "nvidia,tegra194-cec", "nvidia,tegra210-cec";
 			reg = <0x0 0x03960000 0x0 0x10000>;
 			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_CEC>;
@@ -1616,9 +1621,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTC>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTC>;
-			reset-names = "serial";
+			dmas = <&gpcdma 3>, <&gpcdma 3>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -1628,9 +1633,9 @@
 			reg-shift = <2>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_UARTG>;
-			clock-names = "serial";
 			resets = <&bpmp TEGRA194_RESET_UARTG>;
-			reset-names = "serial";
+			dmas = <&gpcdma 2>, <&gpcdma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 1c53ccc5e3cb..9ee7952af799 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -11,12 +11,19 @@
 		rtc0 = "/i2c@7000d000/pmic@3c";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
+		serial3 = &uartd;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x1 0x0>;
@@ -24,6 +31,7 @@
 
 	gpu@57000000 {
 		vdd-supply = <&vdd_gpu>;
+		status = "okay";
 	};
 
 	/* debug port */
@@ -49,6 +57,19 @@
 		};
 	};
 
+	i2c@7000c000 {
+		status = "okay";
+
+		tmp451: temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 4) IRQ_TYPE_LEVEL_LOW>;
+			vcc-supply = <&vdd_1v8>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
 	i2c@7000c400 {
 		status = "okay";
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index a6a58e51822d..627abf51a5a4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -90,6 +90,12 @@
 		};
 	};
 
+	cec@70015000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	clock@70110000 {
 		status = "okay";
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 63b94a04308e..4a64fe510f03 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -20,10 +20,10 @@
 		vi@54080000 {
 			status = "okay";
 
-			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
-
 			csi@838 {
 				status = "okay";
+
+				avdd-dsi-csi-supply = <&vdd_dsi_csi>;
 			};
 		};
 
@@ -1375,6 +1375,15 @@
 
 			#gpio-cells = <2>;
 			gpio-controller;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(L, 1) IRQ_TYPE_EDGE_FALLING>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio_1v8>;
 		};
 
 		exp2: gpio@77 {
@@ -1383,6 +1392,15 @@
 
 			#gpio-cells = <2>;
 			gpio-controller;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio_1v8>;
 		};
 	};
 
@@ -1605,6 +1623,18 @@
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 3 45334>;
+		fan-supply = <&vdd_fan>;
+		interrupt-parent = <&gpio>;
+		interrupts = <TEGRA_GPIO(K, 7) IRQ_TYPE_EDGE_RISING>;
+
+		/* cooling level (0, 1, 2, 3) - pwm inverted */
+		cooling-levels = <255 128 64 0>;
+		#cooling-cells = <2>;
+	};
+
 	vdd_sys_mux: regulator-vdd-sys-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_SYS_MUX";
@@ -1686,7 +1716,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
-		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		gpio = <&exp1 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		vin-supply = <&vdd_1v8>;
 	};
@@ -1760,4 +1790,67 @@
 		enable-active-high;
 		vin-supply = <&vdd_5v0_sys>;
 	};
+
+	vdd_fan: regulator-vdd-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_FAN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&exp1 4 GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_5v0_sys>;
+
+		regulator-enable-ramp-delay = <284>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				map1 {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				map2 {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				map3 {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
index bbd6ff0564da..b84a8e39b404 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
@@ -1365,7 +1365,7 @@
 				};
 			};
 
-			hog-0 {
+			max77620-hog {
 				gpio-hog;
 				output-high;
 				gpios = <2 GPIO_ACTIVE_HIGH>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index c56824d7f4d8..d78b9bd45df6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -22,6 +22,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x1 0x0>;
@@ -64,10 +70,10 @@
 		vi@54080000 {
 			status = "okay";
 
-			avdd-dsi-csi-supply = <&vdd_sys_1v2>;
-
 			csi@838 {
 				status = "okay";
+
+				avdd-dsi-csi-supply = <&vdd_sys_1v2>;
 			};
 		};
 
@@ -266,7 +272,6 @@
 					regulator-max-microvolt = <1170000>;
 					regulator-enable-ramp-delay = <146>;
 					regulator-ramp-delay = <27500>;
-					regulator-ramp-delay-scale = <300>;
 					regulator-always-on;
 					regulator-boot-on;
 
@@ -281,7 +286,6 @@
 					regulator-max-microvolt = <1150000>;
 					regulator-enable-ramp-delay = <176>;
 					regulator-ramp-delay = <27500>;
-					regulator-ramp-delay-scale = <300>;
 					regulator-always-on;
 					regulator-boot-on;
 
@@ -296,7 +300,6 @@
 					regulator-max-microvolt = <1350000>;
 					regulator-enable-ramp-delay = <176>;
 					regulator-ramp-delay = <27500>;
-					regulator-ramp-delay-scale = <350>;
 					regulator-always-on;
 					regulator-boot-on;
 
@@ -311,7 +314,6 @@
 					regulator-max-microvolt = <1800000>;
 					regulator-enable-ramp-delay = <242>;
 					regulator-ramp-delay = <27500>;
-					regulator-ramp-delay-scale = <360>;
 					regulator-always-on;
 					regulator-boot-on;
 
@@ -326,7 +328,6 @@
 					regulator-max-microvolt = <1200000>;
 					regulator-enable-ramp-delay = <26>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 					regulator-always-on;
 					regulator-boot-on;
 
@@ -341,7 +342,6 @@
 					regulator-max-microvolt = <1050000>;
 					regulator-enable-ramp-delay = <22>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 
 					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
 					maxim,active-fps-power-up-slot = <0>;
@@ -354,7 +354,6 @@
 					regulator-max-microvolt = <3300000>;
 					regulator-enable-ramp-delay = <62>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 
 					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
 					maxim,active-fps-power-up-slot = <0>;
@@ -371,7 +370,6 @@
 					regulator-max-microvolt = <1100000>;
 					regulator-enable-ramp-delay = <22>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 					regulator-disable-active-discharge;
 					regulator-always-on;
 					regulator-boot-on;
@@ -395,7 +393,6 @@
 					regulator-max-microvolt = <1050000>;
 					regulator-enable-ramp-delay = <24>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 
 					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
 					maxim,active-fps-power-up-slot = <3>;
@@ -408,7 +405,6 @@
 					regulator-max-microvolt = <1050000>;
 					regulator-enable-ramp-delay = <22>;
 					regulator-ramp-delay = <100000>;
-					regulator-ramp-delay-scale = <200>;
 
 					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
 					maxim,active-fps-power-up-slot = <6>;
@@ -429,6 +425,12 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	cec@70015000 {
+		status = "okay";
+
+		hdmi-phandle = <&sor1>;
+	};
+
 	hda@70030000 {
 		nvidia,model = "NVIDIA Jetson Nano HDA";
 
@@ -524,7 +526,7 @@
 		ports {
 			usb2-0 {
 				status = "okay";
-				mode = "peripheral";
+				mode = "otg";
 				usb-role-switch;
 
 				vbus-supply = <&vdd_5v0_usb>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3541-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3541-0000.dts
new file mode 100644
index 000000000000..b86e271dde0b
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3541-0000.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra210-p3450-0000.dts"
+
+/ {
+	model = "NVIDIA Jetson Nano 2GB Developer Kit";
+	compatible = "nvidia,p3541-0000", "nvidia,p3450-0000", "nvidia,tegra210";
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	host1x@50000000 {
+		sor@54540000 {
+			status = "disabled";
+		};
+
+		dpaux@545c0000 {
+			status = "disabled";
+		};
+	};
+
+	padctl@7009f000 {
+		ports {
+			usb2-1 {
+				vbus-supply = <&vdd_hub_5v0>;
+			};
+
+			usb2-2 {
+				vbus-supply = <&vdd_hub_5v0>;
+			};
+
+			usb3-0 {
+				/delete-property/ vbus-supply;
+			};
+		};
+	};
+
+	regulator-vdd-hdmi-5v0 {
+		gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/delete-node/ regulator-vdd-hub-3v3;
+
+	vdd_hub_5v0: regulator-vdd-hub-5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_HUB_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-peripherals-opp.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-peripherals-opp.dtsi
new file mode 100644
index 000000000000..bf2527d73793
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-peripherals-opp.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/* EMC DVFS OPP table */
+	emc_icc_dvfs_opp_table: opp-table-dvfs0 {
+		compatible = "operating-points-v2";
+
+		opp-40800000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-68000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-102000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-204000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0007>;
+			opp-suspend;
+		};
+
+		opp-408000000-812 {
+			opp-microvolt = <812000 812000 1150000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-665600000-825 {
+			opp-microvolt = <825000 825000 1150000>;
+			opp-hz = /bits/ 64 <665600000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-800000000-825 {
+			opp-microvolt = <825000 825000 1150000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-1065600000-837 {
+			opp-microvolt = <837000 837000 1150000>;
+			opp-hz = /bits/ 64 <1065600000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-1331200000-850 {
+			opp-microvolt = <850000 850000 1150000>;
+			opp-hz = /bits/ 64 <1331200000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-1600000000-887 {
+			opp-microvolt = <887000 887000 1150000>;
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-supported-hw = <0x0007>;
+		};
+	};
+
+	/* EMC bandwidth OPP table */
+	emc_bw_dfs_opp_table: opp-table-dvfs1 {
+		compatible = "operating-points-v2";
+
+		opp-40800000 {
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <652800>;
+		};
+
+		opp-68000000 {
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <1088000>;
+		};
+
+		opp-102000000 {
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		opp-204000000 {
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0007>;
+			opp-peak-kBps = <3264000>;
+			opp-suspend;
+		};
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <6528000>;
+		};
+
+		opp-665600000 {
+			opp-hz = /bits/ 64 <665600000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <10649600>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <12800000>;
+		};
+
+		opp-1065600000 {
+			opp-hz = /bits/ 64 <1065600000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <17049600>;
+		};
+
+		opp-1331200000 {
+			opp-hz = /bits/ 64 <1331200000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <21299200>;
+		};
+
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-supported-hw = <0x0007>;
+			opp-peak-kBps = <25600000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 942e3a0f81ed..709da31d5785 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -9,6 +9,8 @@
 #include <dt-bindings/thermal/tegra124-soctherm.h>
 #include <dt-bindings/soc/tegra-pmc.h>
 
+#include "tegra210-peripherals-opp.dtsi"
+
 / {
 	compatible = "nvidia,tegra210";
 	interrupt-parent = <&lic>;
@@ -183,9 +185,7 @@
 			reg = <0x0 0x54100000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA210_CLK_TSEC>;
-			clock-names = "tsec";
 			resets = <&tegra_car 83>;
-			reset-names = "tsec";
 			status = "disabled";
 		};
 
@@ -202,6 +202,19 @@
 
 			nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
 			nvidia,head = <0>;
+
+			interconnects = <&mc TEGRA210_MC_DISPLAY0A &emc>,
+					<&mc TEGRA210_MC_DISPLAY0B &emc>,
+					<&mc TEGRA210_MC_DISPLAY0C &emc>,
+					<&mc TEGRA210_MC_DISPLAYHC &emc>,
+					<&mc TEGRA210_MC_DISPLAYD &emc>,
+					<&mc TEGRA210_MC_DISPLAYT &emc>;
+			interconnect-names = "wina",
+					     "winb",
+					     "winc",
+					     "cursor",
+					     "wind",
+					     "wint";
 		};
 
 		dc@54240000 {
@@ -217,6 +230,15 @@
 
 			nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
 			nvidia,head = <1>;
+
+			interconnects = <&mc TEGRA210_MC_DISPLAY0AB &emc>,
+					<&mc TEGRA210_MC_DISPLAY0BB &emc>,
+					<&mc TEGRA210_MC_DISPLAY0CB &emc>,
+					<&mc TEGRA210_MC_DISPLAYHCB &emc>;
+			interconnect-names = "wina",
+					     "winb",
+					     "winc",
+					     "cursor";
 		};
 
 		dsia: dsi@54300000 {
@@ -253,7 +275,13 @@
 		nvjpg@54380000 {
 			compatible = "nvidia,tegra210-nvjpg";
 			reg = <0x0 0x54380000 0x0 0x00040000>;
-			status = "disabled";
+			clocks = <&tegra_car TEGRA210_CLK_NVJPG>;
+			clock-names = "nvjpg";
+			resets = <&tegra_car 195>;
+			reset-names = "nvjpg";
+
+			iommus = <&mc TEGRA_SWGROUP_NVJPG>;
+			power-domains = <&pd_nvjpg>;
 		};
 
 		dsib: dsi@54400000 {
@@ -277,13 +305,25 @@
 		nvdec@54480000 {
 			compatible = "nvidia,tegra210-nvdec";
 			reg = <0x0 0x54480000 0x0 0x00040000>;
-			status = "disabled";
+			clocks = <&tegra_car TEGRA210_CLK_NVDEC>;
+			clock-names = "nvdec";
+			resets = <&tegra_car 194>;
+			reset-names = "nvdec";
+
+			iommus = <&mc TEGRA_SWGROUP_NVDEC>;
+			power-domains = <&pd_nvdec>;
 		};
 
 		nvenc@544c0000 {
 			compatible = "nvidia,tegra210-nvenc";
 			reg = <0x0 0x544c0000 0x0 0x00040000>;
-			status = "disabled";
+			clocks = <&tegra_car TEGRA210_CLK_NVENC>;
+			clock-names = "nvenc";
+			resets = <&tegra_car 219>;
+			reset-names = "nvenc";
+
+			iommus = <&mc TEGRA_SWGROUP_NVENC>;
+			power-domains = <&pd_nvenc>;
 		};
 
 		tsec@54500000 {
@@ -409,6 +449,7 @@
 
 	gic: interrupt-controller@50041000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x50041000 0x0 0x1000>,
@@ -485,6 +526,21 @@
 		reg = <0x0 0x60007000 0x0 0x1000>;
 	};
 
+	actmon@6000c800 {
+		compatible = "nvidia,tegra210-actmon", "nvidia,tegra124-actmon";
+		reg = <0x0 0x6000c800 0x0 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_ACTMON>,
+			 <&tegra_car TEGRA210_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+		operating-points-v2 = <&emc_bw_dfs_opp_table>;
+		interconnects = <&mc TEGRA210_MC_MPCORER &emc>;
+		interconnect-names = "cpu-read";
+		#cooling-cells = <2>;
+	};
+
 	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
 		reg = <0x0 0x6000d000 0x0 0x1000>;
@@ -502,7 +558,7 @@
 		interrupt-controller;
 	};
 
-	apbdma: dma@60020000 {
+	apbdma: dma-controller@60020000 {
 		compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma";
 		reg = <0x0 0x60020000 0x0 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -874,6 +930,16 @@
 				pins = "sdmmc3";
 				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
 			};
+
+			gpio_1v8: gpio-1v8 {
+				pins = "gpio";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			gpio_3v3: gpio-3v3 {
+				pins = "gpio";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
 		};
 
 		powergates {
@@ -884,6 +950,18 @@
 				#power-domain-cells = <0>;
 			};
 
+			pd_nvenc: mpe {
+				clocks = <&tegra_car TEGRA210_CLK_NVENC>;
+				resets = <&tegra_car 219>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_nvdec: nvdec {
+				clocks = <&tegra_car TEGRA210_CLK_NVDEC>;
+				resets = <&tegra_car 194>;
+				#power-domain-cells = <0>;
+			};
+
 			pd_sor: sor {
 				clocks = <&tegra_car TEGRA210_CLK_SOR0>,
 					 <&tegra_car TEGRA210_CLK_SOR1>,
@@ -937,6 +1015,12 @@
 				resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
 				#power-domain-cells = <0>;
 			};
+
+			pd_nvjpg: nvjpg {
+				clocks = <&tegra_car TEGRA210_CLK_NVJPG>;
+				resets = <&tegra_car 195>;
+				#power-domain-cells = <0>;
+			};
 		};
 	};
 
@@ -949,6 +1033,15 @@
 		reset-names = "fuse";
 	};
 
+	cec@70015000 {
+		compatible = "nvidia,tegra210-cec";
+		reg = <0x0 0x070015000 0x0 0x1000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_CEC>;
+		clock-names = "cec";
+		status = "disabled";
+	};
+
 	mc: memory-controller@70019000 {
 		compatible = "nvidia,tegra210-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
@@ -959,6 +1052,7 @@
 
 		#iommu-cells = <1>;
 		#reset-cells = <1>;
+		#interconnect-cells = <1>;
 	};
 
 	emc: external-memory-controller@7001b000 {
@@ -970,6 +1064,9 @@
 		clock-names = "emc";
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		nvidia,memory-controller = <&mc>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
+
+		#interconnect-cells = <0>;
 		#cooling-cells = <2>;
 	};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
index 9086a0d010e5..58bf55c0e414 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
@@ -8,6 +8,7 @@
 	aliases {
 		mmc0 = "/bus@0/mmc@3460000";
 		mmc1 = "/bus@0/mmc@3400000";
+		rtc0 = "/bpmp/i2c/pmic@3c";
 	};
 
 	bus@0 {
@@ -170,6 +171,16 @@
 		i2c {
 			status = "okay";
 
+			pmic@3c {
+				compatible = "nvidia,vrs-10";
+				reg = <0x3c>;
+				interrupt-parent = <&pmc>;
+				/* VRS Wake ID is 24 */
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
 			thermal-sensor@4c {
 				compatible = "ti,tmp451";
 				status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
index 36e888053746..9ce55b4d2de8 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
@@ -302,6 +302,16 @@
 		};
 
 		pcie@141a0000 {
+			reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
+			       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
+			       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+			       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
+			       0x2e 0x20000000 0x0 0x10000000>; /* ECAM (256MB)               */
+
+			ranges = <0x81000000 0x00 0x3a100000 0x00 0x3a100000 0x0 0x00100000      /* downstream I/O (1MB) */
+				  0x82000000 0x00 0x40000000 0x2e 0x30000000 0x0 0x08000000      /* non-prefetchable memory (128MB) */
+				  0xc3000000 0x28 0x00000000 0x28 0x00000000 0x6 0x20000000>;    /* prefetchable memory (25088MB) */
+
 			status = "okay";
 			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
 			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
index 84db7132e8fc..ab391a71c3d3 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
@@ -7,6 +7,7 @@
 
 	aliases {
 		mmc0 = "/bus@0/mmc@3400000";
+		rtc0 = "/bpmp/i2c/pmic@3c";
 	};
 
 	bus@0 {
@@ -121,6 +122,20 @@
 		};
 	};
 
+	bpmp {
+		i2c {
+			pmic@3c {
+				compatible = "nvidia,vrs-10";
+				reg = <0x3c>;
+				interrupt-parent = <&pmc>;
+				/* VRS Wake ID is 24 */
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+	};
+
 	vdd_5v0_sys: regulator-vdd-5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_SYS";
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
index 19340d13f789..41821354bbda 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi
@@ -227,13 +227,6 @@
 			wakeup-event-action = <EV_ACT_ASSERTED>;
 			wakeup-source;
 		};
-
-		key-suspend {
-			label = "Suspend";
-			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_SLEEP>;
-		};
 	};
 
 	fan: pwm-fan {
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 984c85eab41a..827dbb420826 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/power/tegra234-powergate.h>
 #include <dt-bindings/reset/tegra234-reset.h>
 #include <dt-bindings/thermal/tegra234-bpmp-thermal.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
 
 / {
 	compatible = "nvidia,tegra234";
@@ -16,6 +17,18 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &gen1_i2c;
+		i2c1 = &gen2_i2c;
+		i2c2 = &cam_i2c;
+		i2c3 = &dp_aux_ch1_i2c;
+		i2c4 = &bpmp_i2c;
+		i2c5 = &dp_aux_ch0_i2c;
+		i2c6 = &dp_aux_ch2_i2c;
+		i2c7 = &gen8_i2c;
+		i2c8 = &dp_aux_ch3_i2c;
+	};
+
 	bus@0 {
 		compatible = "simple-bus";
 
@@ -115,6 +128,56 @@
 		pinmux: pinmux@2430000 {
 			compatible = "nvidia,tegra234-pinmux";
 			reg = <0x0 0x2430000 0x0 0x19100>;
+
+			pex_rst_c4_in_state: pinmux-pex-rst-c4-in {
+				pex_rst {
+					nvidia,pins = "pex_l4_rst_n_pl1";
+					nvidia,function = "rsvd1";
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+					nvidia,tristate = <TEGRA_PIN_ENABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				};
+			};
+
+			pex_rst_c5_in_state: pinmux-pex-rst-c5-in {
+				pex_rst {
+					nvidia,pins = "pex_l5_rst_n_paf1";
+					nvidia,function = "rsvd1";
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+					nvidia,tristate = <TEGRA_PIN_ENABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				};
+			};
+
+			pex_rst_c6_in_state: pinmux-pex-rst-c6-in {
+				pex_rst {
+					nvidia,pins = "pex_l6_rst_n_paf3";
+					nvidia,function = "rsvd1";
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+					nvidia,tristate = <TEGRA_PIN_ENABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				};
+			};
+
+			pex_rst_c7_in_state: pinmux-pex-rst-c7-in {
+				pex_rst {
+					nvidia,pins = "pex_l7_rst_n_pag1";
+					nvidia,function = "rsvd1";
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+					nvidia,tristate = <TEGRA_PIN_ENABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				};
+			};
+
+			pex_rst_c10_in_state: pinmux-pex-rst-c10-in {
+				pex_rst {
+					nvidia,pins = "pex_l10_rst_n_pag7";
+					nvidia,function = "rsvd1";
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+					nvidia,tristate = <TEGRA_PIN_ENABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				};
+			};
 		};
 
 		gpcdma: dma-controller@2600000 {
@@ -2948,6 +3011,11 @@
 				 <&bpmp TEGRA234_CLK_QSPI0_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA234_RESET_QSPI0>;
+			iommus = <&smmu_niso1 TEGRA234_SID_QSPI0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_QSPI0_2X_PM>,
+					  <&bpmp TEGRA234_CLK_QSPI0_PM>;
+			assigned-clock-rates = <199999999 99999999>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC>;
 			status = "disabled";
 		};
 
@@ -3031,6 +3099,11 @@
 				 <&bpmp TEGRA234_CLK_QSPI1_PM>;
 			clock-names = "qspi", "qspi_out";
 			resets = <&bpmp TEGRA234_RESET_QSPI1>;
+			iommus = <&smmu_niso1 TEGRA234_SID_QSPI1>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_QSPI1_2X_PM>,
+					  <&bpmp TEGRA234_CLK_QSPI1_PM>;
+			assigned-clock-rates = <199999999 99999999>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC>;
 			status = "disabled";
 		};
 
@@ -3254,8 +3327,15 @@
 			      <0x0 0x03650000 0x0 0x10000>;
 			reg-names = "hcd", "fpci", "bar2";
 
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pmc 76 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pmc 77 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pmc 78 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pmc 79 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pmc 80 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pmc 81 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pmc 82 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
 				 <&bpmp TEGRA234_CLK_XUSB_FALCON>,
@@ -3815,7 +3895,7 @@
 			compatible = "nvidia,tegra234-sce-fabric";
 			reg = <0x0 0xb600000 0x0 0x40000>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			status = "okay";
+			status = "disabled";
 		};
 
 		rce-fabric@be00000 {
@@ -3900,7 +3980,7 @@
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			resets = <&bpmp TEGRA234_RESET_SPI2>;
 			reset-names = "spi";
-			dmas = <&gpcdma 19>, <&gpcdma 19>;
+			dmas = <&gpcdma 16>, <&gpcdma 16>;
 			dma-names = "rx", "tx";
 			dma-coherent;
 			status = "disabled";
@@ -3995,7 +4075,7 @@
 		};
 
 		dce-fabric@de00000 {
-			compatible = "nvidia,tegra234-sce-fabric";
+			compatible = "nvidia,tegra234-dce-fabric";
 			reg = <0x0 0xde00000 0x0 0x40000>;
 			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
 			status = "okay";
@@ -4018,6 +4098,8 @@
 			#redistributor-regions = <1>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
+
+			#address-cells = <0>;
 		};
 
 		smmu_iso: iommu@10000000 {
@@ -4606,6 +4688,8 @@
 				 <&bpmp TEGRA234_RESET_PEX2_CORE_10>;
 			reset-names = "apb", "core";
 
+			pinctrl-names = "default";
+			pinctrl-0 = <&pex_rst_c10_in_state>;
 			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
 			interrupt-names = "intr";
 
@@ -4857,6 +4941,8 @@
 			       <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
 			reset-names = "apb", "core";
 
+			pinctrl-names = "default";
+			pinctrl-0 = <&pex_rst_c4_in_state>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;  /* controller interrupt */
 			interrupt-names = "intr";
 			nvidia,bpmp = <&bpmp 4>;
@@ -4999,6 +5085,8 @@
 				 <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
 			reset-names = "apb", "core";
 
+			pinctrl-names = "default";
+			pinctrl-0 = <&pex_rst_c5_in_state>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
 			interrupt-names = "intr";
 
@@ -5091,6 +5179,8 @@
 				 <&bpmp TEGRA234_RESET_PEX1_CORE_6>;
 			reset-names = "apb", "core";
 
+			pinctrl-names = "default";
+			pinctrl-0 = <&pex_rst_c6_in_state>;
 			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
 			interrupt-names = "intr";
 
@@ -5183,6 +5273,8 @@
 				 <&bpmp TEGRA234_RESET_PEX2_CORE_7>;
 			reset-names = "apb", "core";
 
+			pinctrl-names = "default";
+			pinctrl-0 = <&pex_rst_c7_in_state>;
 			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
 			interrupt-names = "intr";
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi
new file mode 100644
index 000000000000..94ace6784749
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264-p3834.dtsi"
+
+/ {
+	compatible = "nvidia,p3834-0008", "nvidia,tegra264";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
new file mode 100644
index 000000000000..06795c82427a
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264.dtsi"
+
+/ {
+	compatible = "nvidia,p3834", "nvidia,tegra264";
+
+	aliases {
+	};
+
+	bus@0 {
+		serial@c4e0000 {
+			status = "okay";
+		};
+
+		serial@c5a0000 {
+			status = "okay";
+		};
+	};
+
+	bus@8100000000 {
+		iommu@5000000 {
+			status = "okay";
+		};
+
+		iommu@6000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts
new file mode 100644
index 000000000000..3a6f4b7e6b75
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/dts-v1/;
+
+// module files must be included first
+#include "tegra264-p3834-0008.dtsi"
+#include "tegra264-p3971-0089+p3834.dtsi"
+
+/ {
+	model = "NVIDIA P3971-0089+P3834-0008 Engineering Reference Platform";
+	compatible = "nvidia,p3971-0089+p3834-0008", "nvidia,p3834-0008", "nvidia,tegra264";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi
new file mode 100644
index 000000000000..46cfa8f1da1c
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264-p3971-0089.dtsi"
+
+/ {
+	aliases {
+		serial0 = &{/bus@0/serial@c4e0000};
+		serial1 = &{/bus@0/serial@c5a0000};
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi
new file mode 100644
index 000000000000..e8576cf2a0b6
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264-p3971.dtsi"
diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi
new file mode 100644
index 000000000000..b1bd4ee7aee3
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+/ {
+	bus@0 {
+		aconnect@9000000 {
+			status = "okay";
+
+			dma-controller@9440000 {
+				status = "okay";
+			};
+
+			ahub@9630000 {
+				status = "okay";
+
+				i2s@9280000 {
+					status = "okay";
+				};
+
+				i2s@9290000 {
+					status = "okay";
+				};
+
+				i2s@92b0000 {
+					status = "okay";
+				};
+			};
+
+			interrupt-controller@9960000 {
+				status = "okay";
+			};
+		};
+	};
+
+	bus@8800000000 {
+		hda@90b0000 {
+			nvidia,model = "NVIDIA Jetson Thor AGX HDA";
+			status = "okay";
+		};
+	};
+
+	sound {
+		status = "okay";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       <&admaif20_port>, <&admaif21_port>, <&admaif22_port>, <&admaif23_port>,
+		       <&admaif24_port>, <&admaif25_port>, <&admaif26_port>, <&admaif27_port>,
+		       <&admaif28_port>, <&admaif29_port>, <&admaif30_port>, <&admaif31_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_amx5_in1_port>, <&xbar_amx5_in2_port>,
+		       <&xbar_amx5_in3_port>, <&xbar_amx5_in4_port>,
+		       <&xbar_amx6_in1_port>, <&xbar_amx6_in2_port>,
+		       <&xbar_amx6_in3_port>, <&xbar_amx6_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_adx5_in_port>, <&xbar_adx6_in_port>,
+		       <&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
+		       <&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
+		       <&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
+		       <&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
+		       <&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&amx5_out_port>, <&amx6_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&adx5_out1_port>, <&adx5_out2_port>,
+		       <&adx5_out3_port>, <&adx5_out4_port>,
+		       <&adx6_out1_port>, <&adx6_out2_port>,
+		       <&adx6_out3_port>, <&adx6_out4_port>,
+		       <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
+		       <&mix_out4_port>, <&mix_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s4_port>;
+
+		label = "NVIDIA Jetson Thor AGX APE";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
new file mode 100644
index 000000000000..f137565da804
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
@@ -0,0 +1,3827 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include <dt-bindings/clock/nvidia,tegra264.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/memory/nvidia,tegra264.h>
+#include <dt-bindings/power/nvidia,tegra264-bpmp.h>
+#include <dt-bindings/reset/nvidia,tegra264.h>
+
+/ {
+	compatible = "nvidia,tegra264";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		shmem_bpmp: shmem@86070000 {
+			compatible = "nvidia,tegra264-bpmp-shmem";
+			reg = <0x0 0x86070000 0x0 0x2000>;
+			no-map;
+		};
+	};
+
+	/* SYSTEM MMIO */
+	bus@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000 0x00 0x00000000 0x01 0x00000000>;
+
+		misc@100000 {
+			compatible = "nvidia,tegra234-misc";
+			reg = <0x0 0x00100000 0x0 0x0f000>,
+			      <0x0 0x0c140000 0x0 0x10000>;
+		};
+
+		timer@8000000 {
+			compatible = "nvidia,tegra234-timer";
+			reg = <0x0 0x08000000 0x0 0x140000>;
+			interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		aconnect@9000000 {
+			compatible = "nvidia,tegra264-aconnect",
+					"nvidia,tegra210-aconnect";
+			clocks = <&bpmp TEGRA264_CLK_APE>,
+				<&bpmp TEGRA264_CLK_ADSP>;
+			clock-names = "ape", "apb2ape";
+			power-domains = <&bpmp TEGRA264_POWER_DOMAIN_AUD>;
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x9000000 0x0 0x9000000 0x0 0x2000000>;
+
+			adma: dma-controller@9440000 {
+				compatible = "nvidia,tegra264-adma";
+				reg = <0x0 0x9440000 0x0 0xb0000>;
+				interrupt-parent = <&agic_page0>;
+				interrupts = <GIC_SPI 0x90 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x91 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x92 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x93 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x94 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x95 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x96 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x97 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x98 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x99 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x9a IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x9b IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x9c IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x9d IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x9e IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0x9f IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xa0 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xa1 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xa2 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xa3 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xa4 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xa5 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xa6 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xa7 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xa8 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xa9 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xaa IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xab IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xac IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xad IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xae IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xaf IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xb0 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xb1 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xb2 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xb3 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xb4 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xb5 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xb6 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xb7 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xb8 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xb9 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xba IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xbb IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xbc IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xbd IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xbe IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xbf IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xc0 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xc1 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xc2 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xc3 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xc4 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xc5 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xc6 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xc7 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xc8 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xc9 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xca IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xcb IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xcc IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xcd IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xce IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 0xcf IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				clocks = <&bpmp TEGRA264_CLK_AHUB>;
+				clock-names = "d_audio";
+				status = "disabled";
+			};
+
+			tegra_ahub: ahub@9630000 {
+				compatible = "nvidia,tegra264-ahub";
+				reg = <0x0 0x9630000 0x0 0x10000>;
+				clocks = <&bpmp TEGRA264_CLK_AHUB>;
+				clock-names = "ahub";
+				assigned-clocks = <&bpmp TEGRA264_CLK_AHUB>;
+				assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON_APE>;
+				status = "disabled";
+
+				#address-cells = <2>;
+				#size-cells = <2>;
+				/* ADMA is under AHUB range, its excluded in the defined range */
+				ranges = <0x0 0x9280000 0x0 0x9280000 0x0 0x1c0000>,
+					<0x0 0x9510000 0x0 0x9510000 0x0 0x370000>;
+
+				tegra_i2s1: i2s@9280000 {
+					compatible = "nvidia,tegra264-i2s";
+					reg = <0x0 0x9280000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_I2S1>,
+					       <&bpmp TEGRA264_CLK_I2S1_SCLK_IN>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA264_CLK_I2S1>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S1";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s1_cif: endpoint {
+								remote-endpoint = <&xbar_i2s1>;
+							};
+						};
+
+						i2s1_port: port@1 {
+							reg = <1>;
+
+							i2s1_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_i2s2: i2s@9290000 {
+					compatible = "nvidia,tegra264-i2s";
+					reg = <0x0 0x9290000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_I2S2>,
+						 <&bpmp TEGRA264_CLK_I2S2_SCLK_IN>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA264_CLK_I2S2>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S2";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s2_cif: endpoint {
+								remote-endpoint = <&xbar_i2s2>;
+							};
+						};
+
+						i2s2_port: port@1 {
+							reg = <1>;
+
+							i2s2_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_i2s3: i2s@92a0000 {
+					compatible = "nvidia,tegra264-i2s";
+					reg = <0x0 0x92a0000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_I2S3>,
+					       <&bpmp TEGRA264_CLK_I2S3_SCLK_IN>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA264_CLK_I2S3>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S3";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s3_cif: endpoint {
+								remote-endpoint = <&xbar_i2s3>;
+							};
+						};
+
+						i2s3_port: port@1 {
+							reg = <1>;
+
+							i2s3_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_i2s4: i2s@92b0000 {
+					compatible = "nvidia,tegra264-i2s";
+					reg = <0x0 0x92b0000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_I2S4>,
+					       <&bpmp TEGRA264_CLK_I2S4_SCLK_IN>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA264_CLK_I2S4>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S4";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s4_cif: endpoint {
+								remote-endpoint = <&xbar_i2s4>;
+							};
+						};
+
+						i2s4_port: port@1 {
+							reg = <1>;
+
+							i2s4_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_i2s5: i2s@92c0000 {
+					compatible = "nvidia,tegra264-i2s";
+					reg = <0x0 0x92c0000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_I2S5>,
+					       <&bpmp TEGRA264_CLK_I2S5_SCLK_IN>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA264_CLK_I2S5>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S5";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s5_cif: endpoint {
+								remote-endpoint = <&xbar_i2s5>;
+							};
+						};
+
+						i2s5_port: port@1 {
+							reg = <1>;
+
+							i2s5_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_i2s6: i2s@92d0000 {
+					compatible = "nvidia,tegra264-i2s";
+					reg = <0x0 0x92d0000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_I2S6>,
+					       <&bpmp TEGRA264_CLK_I2S6_SCLK_IN>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA264_CLK_I2S6>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S6";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s6_cif: endpoint {
+								remote-endpoint = <&xbar_i2s6>;
+							};
+						};
+
+						i2s6_port: port@1 {
+							reg = <1>;
+
+							i2s6_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_i2s7: i2s@92e0000 {
+					compatible = "nvidia,tegra264-i2s";
+					reg = <0x0 0x92e0000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_I2S7>,
+					       <&bpmp TEGRA264_CLK_I2S7_SCLK_IN>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA264_CLK_I2S7>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S7";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s7_cif: endpoint {
+								remote-endpoint = <&xbar_i2s7>;
+							};
+						};
+
+						i2s7_port: port@1 {
+							reg = <1>;
+
+							i2s7_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_i2s8: i2s@92f0000 {
+					compatible = "nvidia,tegra264-i2s";
+					reg = <0x0 0x92f0000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_I2S8>,
+					       <&bpmp TEGRA264_CLK_I2S8_SCLK_IN>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA264_CLK_I2S8>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S8";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s8_cif: endpoint {
+								remote-endpoint = <&xbar_i2s8>;
+							};
+						};
+
+						i2s8_port: port@1 {
+							reg = <1>;
+
+							i2s8_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_dmic1: dmic@9300000 {
+					compatible = "nvidia,tegra264-dmic",
+							"nvidia,tegra210-dmic";
+					reg = <0x0 0x9300000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_DMIC1>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA264_CLK_DMIC1>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC1";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic1_cif: endpoint {
+								remote-endpoint = <&xbar_dmic1>;
+							};
+						};
+
+						dmic1_port: port@1 {
+							reg = <1>;
+
+							dmic1_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_dmic2: dmic@9310000 {
+					compatible = "nvidia,tegra264-dmic",
+						   "nvidia,tegra210-dmic";
+					reg = <0x0 0x9310000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_DMIC1>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA264_CLK_DMIC1>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC2";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic2_cif: endpoint {
+								remote-endpoint = <&xbar_dmic2>;
+							};
+						};
+
+						dmic2_port: port@1 {
+							reg = <1>;
+
+							dmic2_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_dspk1: dspk@9380000 {
+					compatible = "nvidia,tegra264-dspk",
+							"nvidia,tegra186-dspk";
+					reg = <0x0 0x9380000 0x0 0x10000>;
+					clocks = <&bpmp TEGRA264_CLK_DSPK1>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA264_CLK_DSPK1>;
+					assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK1";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk1_cif: endpoint {
+								remote-endpoint = <&xbar_dspk1>;
+							};
+						};
+
+						dspk1_port: port@1 {
+							reg = <1>;
+
+							dspk1_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_amx1: amx@9510000 {
+					compatible = "nvidia,tegra264-amx";
+					reg = <0x0 0x9510000 0x0 0x10000>;
+					sound-name-prefix = "AMX1";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1: endpoint {
+								remote-endpoint = <&xbar_amx1_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2: endpoint {
+								remote-endpoint = <&xbar_amx1_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3: endpoint {
+								remote-endpoint = <&xbar_amx1_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4: endpoint {
+								remote-endpoint = <&xbar_amx1_in4>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out: endpoint {
+								remote-endpoint = <&xbar_amx1_out>;
+							};
+						};
+					};
+				};
+
+				tegra_amx2: amx@9520000 {
+					compatible = "nvidia,tegra264-amx";
+					reg = <0x0 0x9520000 0x0 0x10000>;
+					sound-name-prefix = "AMX2";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1: endpoint {
+								remote-endpoint = <&xbar_amx2_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2: endpoint {
+								remote-endpoint = <&xbar_amx2_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx2_in3: endpoint {
+								remote-endpoint = <&xbar_amx2_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx2_in4: endpoint {
+								remote-endpoint = <&xbar_amx2_in4>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out: endpoint {
+								remote-endpoint = <&xbar_amx2_out>;
+							};
+						};
+					};
+				};
+
+				tegra_amx3: amx@9530000 {
+					compatible = "nvidia,tegra264-amx";
+					reg = <0x0 0x9530000 0x0 0x10000>;
+					sound-name-prefix = "AMX3";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1: endpoint {
+								remote-endpoint = <&xbar_amx3_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2: endpoint {
+								remote-endpoint = <&xbar_amx3_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3: endpoint {
+								remote-endpoint = <&xbar_amx3_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4: endpoint {
+								remote-endpoint = <&xbar_amx3_in4>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out: endpoint {
+								remote-endpoint = <&xbar_amx3_out>;
+							};
+						};
+					};
+				};
+
+				tegra_amx4: amx@9540000 {
+					compatible = "nvidia,tegra264-amx";
+					reg = <0x0 0x9540000 0x0 0x10000>;
+					sound-name-prefix = "AMX4";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1: endpoint {
+								remote-endpoint = <&xbar_amx4_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2: endpoint {
+								remote-endpoint = <&xbar_amx4_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3: endpoint {
+								remote-endpoint = <&xbar_amx4_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4: endpoint {
+								remote-endpoint = <&xbar_amx4_in4>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out: endpoint {
+								remote-endpoint = <&xbar_amx4_out>;
+							};
+						};
+					};
+				};
+
+				tegra_amx5: amx@9550000 {
+					compatible = "nvidia,tegra264-amx";
+					reg = <0x0 0x9550000 0x0 0x10000>;
+					sound-name-prefix = "AMX5";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx5_in1: endpoint {
+								remote-endpoint = <&xbar_amx5_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx5_in2: endpoint {
+								remote-endpoint = <&xbar_amx5_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx5_in3: endpoint {
+								remote-endpoint = <&xbar_amx5_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx5_in4: endpoint {
+								remote-endpoint = <&xbar_amx5_in4>;
+							};
+						};
+
+						amx5_out_port: port@4 {
+							reg = <4>;
+
+							amx5_out: endpoint {
+								remote-endpoint = <&xbar_amx5_out>;
+							};
+						};
+					};
+				};
+
+				tegra_amx6: amx@9560000 {
+					compatible = "nvidia,tegra264-amx";
+					reg = <0x0 0x9560000 0x0 0x10000>;
+					sound-name-prefix = "AMX6";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx6_in1: endpoint {
+								remote-endpoint = <&xbar_amx6_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx6_in2: endpoint {
+								remote-endpoint = <&xbar_amx6_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx6_in3: endpoint {
+								remote-endpoint = <&xbar_amx6_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx6_in4: endpoint {
+								remote-endpoint = <&xbar_amx6_in4>;
+							};
+						};
+
+						amx6_out_port: port@4 {
+							reg = <4>;
+
+							amx6_out: endpoint {
+								remote-endpoint = <&xbar_amx6_out>;
+							};
+						};
+					};
+				};
+
+				tegra_adx1: adx@9590000 {
+					compatible = "nvidia,tegra264-adx";
+					reg = <0x0 0x9590000 0x0 0x10000>;
+					sound-name-prefix = "ADX1";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in: endpoint {
+								remote-endpoint = <&xbar_adx1_in>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1: endpoint {
+								remote-endpoint = <&xbar_adx1_out1>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2: endpoint {
+								remote-endpoint = <&xbar_adx1_out2>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3: endpoint {
+								remote-endpoint = <&xbar_adx1_out3>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4: endpoint {
+								remote-endpoint = <&xbar_adx1_out4>;
+							};
+						};
+					};
+				};
+
+				tegra_adx2: adx@95a0000 {
+					compatible = "nvidia,tegra264-adx";
+					reg = <0x0 0x95a0000 0x0 0x10000>;
+					sound-name-prefix = "ADX2";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in: endpoint {
+								remote-endpoint = <&xbar_adx2_in>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1: endpoint {
+								remote-endpoint = <&xbar_adx2_out1>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2: endpoint {
+								remote-endpoint = <&xbar_adx2_out2>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3: endpoint {
+								remote-endpoint = <&xbar_adx2_out3>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4: endpoint {
+								remote-endpoint = <&xbar_adx2_out4>;
+							};
+						};
+					};
+				};
+
+				tegra_adx3: adx@95b0000 {
+					compatible = "nvidia,tegra264-adx";
+					reg = <0x0 0x95b0000 0x0 0x10000>;
+					sound-name-prefix = "ADX3";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in: endpoint {
+								remote-endpoint = <&xbar_adx3_in>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1: endpoint {
+								remote-endpoint = <&xbar_adx3_out1>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2: endpoint {
+								remote-endpoint = <&xbar_adx3_out2>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3: endpoint {
+								remote-endpoint = <&xbar_adx3_out3>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4: endpoint {
+								remote-endpoint = <&xbar_adx3_out4>;
+							};
+						};
+					};
+				};
+
+				tegra_adx4: adx@95c0000 {
+					compatible = "nvidia,tegra264-adx";
+					reg = <0x0 0x95c0000 0x0 0x10000>;
+					sound-name-prefix = "ADX4";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in: endpoint {
+								remote-endpoint = <&xbar_adx4_in>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1: endpoint {
+								remote-endpoint = <&xbar_adx4_out1>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2: endpoint {
+								remote-endpoint = <&xbar_adx4_out2>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3: endpoint {
+								remote-endpoint = <&xbar_adx4_out3>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4: endpoint {
+								remote-endpoint = <&xbar_adx4_out4>;
+							};
+						};
+					};
+				};
+
+				tegra_adx5: adx@95d0000 {
+					compatible = "nvidia,tegra264-adx";
+					reg = <0x0 0x95d0000 0x0 0x10000>;
+					sound-name-prefix = "ADX5";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx5_in: endpoint {
+								remote-endpoint = <&xbar_adx5_in>;
+							};
+						};
+
+						adx5_out1_port: port@1 {
+							reg = <1>;
+
+							adx5_out1: endpoint {
+								remote-endpoint = <&xbar_adx5_out1>;
+							};
+						};
+
+						adx5_out2_port: port@2 {
+							reg = <2>;
+
+							adx5_out2: endpoint {
+								remote-endpoint = <&xbar_adx5_out2>;
+							};
+						};
+
+						adx5_out3_port: port@3 {
+							reg = <3>;
+
+							adx5_out3: endpoint {
+								remote-endpoint = <&xbar_adx5_out3>;
+							};
+						};
+
+						adx5_out4_port: port@4 {
+							reg = <4>;
+
+							adx5_out4: endpoint {
+								remote-endpoint = <&xbar_adx5_out4>;
+							};
+						};
+					};
+				};
+
+				tegra_adx6: adx@95e0000 {
+					compatible = "nvidia,tegra264-adx";
+					reg = <0x0 0x95e0000 0x0 0x10000>;
+					sound-name-prefix = "ADX6";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx6_in: endpoint {
+								remote-endpoint = <&xbar_adx6_in>;
+							};
+						};
+
+						adx6_out1_port: port@1 {
+							reg = <1>;
+
+							adx6_out1: endpoint {
+								remote-endpoint = <&xbar_adx6_out1>;
+							};
+						};
+
+						adx6_out2_port: port@2 {
+							reg = <2>;
+
+							adx6_out2: endpoint {
+								remote-endpoint = <&xbar_adx6_out2>;
+							};
+						};
+
+						adx6_out3_port: port@3 {
+							reg = <3>;
+
+							adx6_out3: endpoint {
+								remote-endpoint = <&xbar_adx6_out3>;
+							};
+						};
+
+						adx6_out4_port: port@4 {
+							reg = <4>;
+
+							adx6_out4: endpoint {
+								remote-endpoint = <&xbar_adx6_out4>;
+							};
+						};
+					};
+				};
+
+				tegra_admaif: admaif@9610000 {
+					compatible = "nvidia,tegra264-admaif";
+					reg = <0x0 0x9610000 0x0 0x10000>;
+					dmas = <&adma 1>, <&adma 1>,
+					     <&adma 2>, <&adma 2>,
+					     <&adma 3>, <&adma 3>,
+					     <&adma 4>, <&adma 4>,
+					     <&adma 5>, <&adma 5>,
+					     <&adma 6>, <&adma 6>,
+					     <&adma 7>, <&adma 7>,
+					     <&adma 8>, <&adma 8>,
+					     <&adma 9>, <&adma 9>,
+					     <&adma 10>, <&adma 10>,
+					     <&adma 11>, <&adma 11>,
+					     <&adma 12>, <&adma 12>,
+					     <&adma 13>, <&adma 13>,
+					     <&adma 14>, <&adma 14>,
+					     <&adma 15>, <&adma 15>,
+					     <&adma 16>, <&adma 16>,
+					     <&adma 17>, <&adma 17>,
+					     <&adma 18>, <&adma 18>,
+					     <&adma 19>, <&adma 19>,
+					     <&adma 20>, <&adma 20>,
+					     <&adma 21>, <&adma 21>,
+					     <&adma 22>, <&adma 22>,
+					     <&adma 23>, <&adma 23>,
+					     <&adma 24>, <&adma 24>,
+					     <&adma 25>, <&adma 25>,
+					     <&adma 26>, <&adma 26>,
+					     <&adma 27>, <&adma 27>,
+					     <&adma 28>, <&adma 28>,
+					     <&adma 29>, <&adma 29>,
+					     <&adma 30>, <&adma 30>,
+					     <&adma 31>, <&adma 31>,
+					     <&adma 32>, <&adma 32>;
+					dma-names = "rx1", "tx1",
+						"rx2", "tx2",
+						"rx3", "tx3",
+						"rx4", "tx4",
+						"rx5", "tx5",
+						"rx6", "tx6",
+						"rx7", "tx7",
+						"rx8", "tx8",
+						"rx9", "tx9",
+						"rx10", "tx10",
+						"rx11", "tx11",
+						"rx12", "tx12",
+						"rx13", "tx13",
+						"rx14", "tx14",
+						"rx15", "tx15",
+						"rx16", "tx16",
+						"rx17", "tx17",
+						"rx18", "tx18",
+						"rx19", "tx19",
+						"rx20", "tx20",
+						"rx21", "tx21",
+						"rx22", "tx22",
+						"rx23", "tx23",
+						"rx24", "tx24",
+						"rx25", "tx25",
+						"rx26", "tx26",
+						"rx27", "tx27",
+						"rx28", "tx28",
+						"rx29", "tx29",
+						"rx30", "tx30",
+						"rx31", "tx31",
+						"rx32", "tx32";
+
+					 interconnects =
+						<&mc TEGRA264_MEMORY_CLIENT_APEDMAR &emc>,
+						<&mc TEGRA264_MEMORY_CLIENT_APEDMAW &emc>;
+						interconnect-names = "dma-mem", "write";
+
+					iommus = <&smmu1 TEGRA264_SID_APE>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0: endpoint {
+								remote-endpoint = <&xbar_admaif0>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1: endpoint {
+								remote-endpoint = <&xbar_admaif1>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2: endpoint {
+								remote-endpoint = <&xbar_admaif2>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3: endpoint {
+								remote-endpoint = <&xbar_admaif3>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4: endpoint {
+								remote-endpoint = <&xbar_admaif4>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5: endpoint {
+								remote-endpoint = <&xbar_admaif5>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6: endpoint {
+								remote-endpoint = <&xbar_admaif6>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7: endpoint {
+								remote-endpoint = <&xbar_admaif7>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8: endpoint {
+								remote-endpoint = <&xbar_admaif8>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9: endpoint {
+								remote-endpoint = <&xbar_admaif9>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10: endpoint {
+								remote-endpoint = <&xbar_admaif10>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11: endpoint {
+								remote-endpoint = <&xbar_admaif11>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12: endpoint {
+								remote-endpoint = <&xbar_admaif12>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13: endpoint {
+								remote-endpoint = <&xbar_admaif13>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14: endpoint {
+								remote-endpoint = <&xbar_admaif14>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15: endpoint {
+								remote-endpoint = <&xbar_admaif15>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16: endpoint {
+								remote-endpoint = <&xbar_admaif16>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17: endpoint {
+								remote-endpoint = <&xbar_admaif17>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18: endpoint {
+								remote-endpoint = <&xbar_admaif18>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19: endpoint {
+								remote-endpoint = <&xbar_admaif19>;
+							};
+						};
+
+						admaif20_port: port@14 {
+							reg = <0x14>;
+
+							admaif20: endpoint {
+								remote-endpoint = <&xbar_admaif20>;
+							};
+						};
+
+						admaif21_port: port@15 {
+							reg = <0x15>;
+
+							admaif21: endpoint {
+								remote-endpoint = <&xbar_admaif21>;
+							};
+						};
+
+						admaif22_port: port@16 {
+							reg = <0x16>;
+
+							admaif22: endpoint {
+								remote-endpoint = <&xbar_admaif22>;
+							};
+						};
+
+						admaif23_port: port@17 {
+							reg = <0x17>;
+
+							admaif23: endpoint {
+								remote-endpoint = <&xbar_admaif23>;
+							};
+						};
+
+						admaif24_port: port@18 {
+							reg = <0x18>;
+
+							admaif24: endpoint {
+								remote-endpoint = <&xbar_admaif24>;
+							};
+						};
+
+						admaif25_port: port@19 {
+							reg = <0x19>;
+
+							admaif25: endpoint {
+								remote-endpoint = <&xbar_admaif25>;
+							};
+						};
+
+						admaif26_port: port@1a {
+							reg = <0x1a>;
+
+							admaif26: endpoint {
+								remote-endpoint = <&xbar_admaif26>;
+							};
+						};
+
+						admaif27_port: port@1b {
+							reg = <0x1b>;
+
+							admaif27: endpoint {
+								remote-endpoint = <&xbar_admaif27>;
+							};
+						};
+
+						admaif28_port: port@1c {
+							reg = <0x1c>;
+
+							admaif28: endpoint {
+								remote-endpoint = <&xbar_admaif28>;
+							};
+						};
+
+						admaif29_port: port@1d {
+							reg = <0x1d>;
+
+							admaif29: endpoint {
+								remote-endpoint = <&xbar_admaif29>;
+							};
+						};
+
+						admaif30_port: port@1e {
+							reg = <0x1e>;
+
+							admaif30: endpoint {
+								remote-endpoint = <&xbar_admaif30>;
+							};
+						};
+
+						admaif31_port: port@1f {
+							reg = <0x1f>;
+
+							admaif31: endpoint {
+								remote-endpoint = <&xbar_admaif31>;
+							};
+						};
+					};
+				};
+
+				tegra_sfc1: sfc@9700000 {
+					compatible = "nvidia,tegra264-sfc",
+							"nvidia,tegra210-sfc";
+					reg = <0x0 0x9700000 0x0 0x10000>;
+					sound-name-prefix = "SFC1";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc1_in>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc1_out>;
+							};
+						};
+					};
+				};
+
+				tegra_sfc2: sfc@9710000 {
+					compatible = "nvidia,tegra264-sfc",
+							"nvidia,tegra210-sfc";
+					reg = <0x0 0x9710000 0x0 0x10000>;
+					sound-name-prefix = "SFC2";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc2_in>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc2_out>;
+							};
+						};
+					};
+				};
+
+				tegra_sfc3: sfc@9720000 {
+					compatible = "nvidia,tegra264-sfc",
+							"nvidia,tegra210-sfc";
+					reg = <0x0 0x9720000 0x0 0x10000>;
+					sound-name-prefix = "SFC3";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc3_in>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc3_out>;
+							};
+						};
+					};
+				};
+
+				tegra_sfc4: sfc@9730000 {
+					compatible = "nvidia,tegra264-sfc",
+							"nvidia,tegra210-sfc";
+					reg = <0x0 0x9730000 0x0 0x10000>;
+					sound-name-prefix = "SFC4";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc4_in>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc4_out>;
+							};
+						};
+					};
+				};
+
+				tegra_ope1: processing-engine@9780000 {
+					compatible = "nvidia,tegra264-ope",
+							"nvidia,tegra210-ope";
+					reg = <0x0 0x9780000 0x0 0x10000>;
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges = <0x0 0x9780000 0x0 0x9780000 0x0 0x30000>;
+					sound-name-prefix = "OPE1";
+
+					equalizer@9790000 {
+						compatible = "nvidia,tegra264-peq",
+								"nvidia,tegra210-peq";
+						reg = <0x0 0x9790000 0x0 0x10000>;
+					};
+
+					dynamic-range-compressor@97a0000 {
+						compatible = "nvidia,tegra264-mbdrc",
+								"nvidia,tegra210-mbdrc";
+						reg = <0x0 0x97a0000 0x0 0x10000>;
+					};
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint =
+									<&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint =
+									<&xbar_ope1_out_ep>;
+							};
+						};
+					};
+				};
+
+				tegra_mvc1: mvc@9800000 {
+					compatible = "nvidia,tegra264-mvc",
+							"nvidia,tegra210-mvc";
+					reg = <0x0 0x9800000 0x0 0x10000>;
+					sound-name-prefix = "MVC1";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc1_in>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc1_out>;
+							};
+						};
+					};
+				};
+
+				tegra_mvc2: mvc@9810000 {
+					compatible = "nvidia,tegra264-mvc",
+							"nvidia,tegra210-mvc";
+					reg = <0x0 0x9810000 0x0 0x10000>;
+					sound-name-prefix = "MVC2";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc2_in>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc2_out>;
+							};
+						};
+					};
+				};
+
+				tegra_amixer: amixer@9820000 {
+					compatible = "nvidia,tegra264-amixer",
+							"nvidia,tegra210-amixer";
+					reg = <0x0 0x9820000 0x0 0x10000>;
+					sound-name-prefix = "MIXER1";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mix_in1: endpoint {
+								remote-endpoint = <&xbar_mix_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mix_in2: endpoint {
+								remote-endpoint = <&xbar_mix_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mix_in3: endpoint {
+								remote-endpoint = <&xbar_mix_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mix_in4: endpoint {
+								remote-endpoint = <&xbar_mix_in4>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mix_in5: endpoint {
+								remote-endpoint = <&xbar_mix_in5>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mix_in6: endpoint {
+								remote-endpoint = <&xbar_mix_in6>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mix_in7: endpoint {
+								remote-endpoint = <&xbar_mix_in7>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mix_in8: endpoint {
+								remote-endpoint = <&xbar_mix_in8>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mix_in9: endpoint {
+								remote-endpoint = <&xbar_mix_in9>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mix_in10: endpoint {
+								remote-endpoint = <&xbar_mix_in10>;
+							};
+						};
+
+						mix_out1_port: port@a {
+							reg = <0xa>;
+
+							mix_out1: endpoint {
+								remote-endpoint = <&xbar_mix_out1>;
+							};
+						};
+
+						mix_out2_port: port@b {
+							reg = <0xb>;
+
+							mix_out2: endpoint {
+								remote-endpoint = <&xbar_mix_out2>;
+							};
+						};
+
+						mix_out3_port: port@c {
+							reg = <0xc>;
+
+							mix_out3: endpoint {
+								remote-endpoint = <&xbar_mix_out3>;
+							};
+						};
+
+						mix_out4_port: port@d {
+							reg = <0xd>;
+
+							mix_out4: endpoint {
+								remote-endpoint = <&xbar_mix_out4>;
+							};
+						};
+
+						mix_out5_port: port@e {
+							reg = <0xe>;
+
+							mix_out5: endpoint {
+								remote-endpoint = <&xbar_mix_out5>;
+							};
+						};
+					};
+				};
+
+				tegra_asrc: asrc@9850000 {
+					compatible = "nvidia,tegra264-asrc";
+					reg = <0x0 0x9850000 0x0 0x10000>;
+					sound-name-prefix = "ASRC1";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							asrc_in1_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							asrc_in2_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							asrc_in3_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							asrc_in4_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							asrc_in5_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							asrc_in6_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							asrc_in7_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in7_ep>;
+							};
+						};
+
+						asrc_out1_port: port@7 {
+							reg = <0x7>;
+
+							asrc_out1_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out1_ep>;
+							};
+						};
+
+						asrc_out2_port: port@8 {
+							reg = <0x8>;
+
+							asrc_out2_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out2_ep>;
+							};
+						};
+
+						asrc_out3_port: port@9 {
+							reg = <0x9>;
+
+							asrc_out3_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out3_ep>;
+							};
+						};
+
+						asrc_out4_port: port@a {
+							reg = <0xa>;
+
+							asrc_out4_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out4_ep>;
+							};
+						};
+
+						asrc_out5_port: port@b {
+							reg = <0xb>;
+
+							asrc_out5_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out5_ep>;
+							};
+						};
+
+						asrc_out6_port:	port@c {
+							reg = <0xc>;
+
+							asrc_out6_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out6_ep>;
+							};
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						xbar_admaif0: endpoint {
+							remote-endpoint = <&admaif0>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						xbar_admaif1: endpoint {
+							remote-endpoint = <&admaif1>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						xbar_admaif2: endpoint {
+							remote-endpoint = <&admaif2>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						xbar_admaif3: endpoint {
+							remote-endpoint = <&admaif3>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						xbar_admaif4: endpoint {
+							remote-endpoint = <&admaif4>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						xbar_admaif5: endpoint {
+							remote-endpoint = <&admaif5>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						xbar_admaif6: endpoint {
+							remote-endpoint = <&admaif6>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						xbar_admaif7: endpoint {
+							remote-endpoint = <&admaif7>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						xbar_admaif8: endpoint {
+							remote-endpoint = <&admaif8>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						xbar_admaif9: endpoint {
+							remote-endpoint = <&admaif9>;
+						};
+					};
+
+					port@a {
+						reg = <0xa>;
+
+						xbar_admaif10: endpoint {
+							remote-endpoint = <&admaif10>;
+						};
+					};
+
+					port@b {
+						reg = <0xb>;
+
+						xbar_admaif11: endpoint {
+							remote-endpoint = <&admaif11>;
+						};
+					};
+
+					port@c {
+						reg = <0xc>;
+
+						xbar_admaif12: endpoint {
+							remote-endpoint = <&admaif12>;
+						};
+					};
+
+					port@d {
+						reg = <0xd>;
+
+						xbar_admaif13: endpoint {
+							remote-endpoint = <&admaif13>;
+						};
+					};
+
+					port@e {
+						reg = <0xe>;
+
+						xbar_admaif14: endpoint {
+							remote-endpoint = <&admaif14>;
+						};
+					};
+
+					port@f {
+						reg = <0xf>;
+
+						xbar_admaif15: endpoint {
+							remote-endpoint = <&admaif15>;
+						};
+					};
+
+					port@10 {
+						reg = <0x10>;
+
+						xbar_admaif16: endpoint {
+							remote-endpoint = <&admaif16>;
+						};
+					};
+
+					port@11 {
+						reg = <0x11>;
+
+						xbar_admaif17: endpoint {
+							remote-endpoint = <&admaif17>;
+						};
+					};
+
+					port@12 {
+						reg = <0x12>;
+
+						xbar_admaif18: endpoint {
+							remote-endpoint = <&admaif18>;
+						};
+					};
+
+					port@13 {
+						reg = <0x13>;
+
+						xbar_admaif19: endpoint {
+							remote-endpoint = <&admaif19>;
+						};
+					};
+
+					port@14 {
+						reg = <0x14>;
+
+						xbar_admaif20: endpoint {
+							remote-endpoint = <&admaif20>;
+						};
+					};
+
+					port@15 {
+						reg = <0x15>;
+
+						xbar_admaif21: endpoint {
+							remote-endpoint = <&admaif21>;
+						};
+					};
+
+					port@16 {
+						reg = <0x16>;
+
+						xbar_admaif22: endpoint {
+							remote-endpoint = <&admaif22>;
+						};
+					};
+
+					port@17 {
+						reg = <0x17>;
+
+						xbar_admaif23: endpoint {
+							remote-endpoint = <&admaif23>;
+						};
+					};
+
+					port@18 {
+						reg = <0x18>;
+
+						xbar_admaif24: endpoint {
+							remote-endpoint = <&admaif24>;
+						};
+					};
+
+					port@19 {
+						reg = <0x19>;
+
+						xbar_admaif25: endpoint {
+							remote-endpoint = <&admaif25>;
+						};
+					};
+
+					port@1a {
+						reg = <0x1a>;
+
+						xbar_admaif26: endpoint {
+							remote-endpoint = <&admaif26>;
+						};
+					};
+
+					port@1b {
+						reg = <0x1b>;
+
+						xbar_admaif27: endpoint {
+							remote-endpoint = <&admaif27>;
+						};
+					};
+
+					port@1c {
+						reg = <0x1c>;
+
+						xbar_admaif28: endpoint {
+							remote-endpoint = <&admaif28>;
+						};
+					};
+
+					port@1d {
+						reg = <0x1d>;
+
+						xbar_admaif29: endpoint {
+							remote-endpoint = <&admaif29>;
+						};
+					};
+
+					port@1e {
+						reg = <0x1e>;
+
+						xbar_admaif30: endpoint {
+							remote-endpoint = <&admaif30>;
+						};
+					};
+
+					port@1f {
+						reg = <0x1f>;
+
+						xbar_admaif31: endpoint {
+							remote-endpoint = <&admaif31>;
+						};
+					};
+
+					xbar_i2s1_port: port@20 {
+						reg = <0x20>;
+
+						xbar_i2s1: endpoint {
+							remote-endpoint = <&i2s1_cif>;
+						};
+					};
+
+					xbar_i2s2_port: port@21 {
+						reg = <0x21>;
+
+						xbar_i2s2: endpoint {
+							remote-endpoint = <&i2s2_cif>;
+						};
+					};
+
+					xbar_i2s3_port: port@22 {
+						reg = <0x22>;
+
+						xbar_i2s3: endpoint {
+							remote-endpoint = <&i2s3_cif>;
+						};
+					};
+
+					xbar_i2s4_port: port@23 {
+						reg = <0x23>;
+
+						xbar_i2s4: endpoint {
+							remote-endpoint = <&i2s4_cif>;
+						};
+					};
+
+					xbar_i2s5_port: port@24 {
+						reg = <0x24>;
+
+						xbar_i2s5: endpoint {
+							remote-endpoint = <&i2s5_cif>;
+						};
+					};
+
+					xbar_i2s6_port: port@25 {
+						reg = <0x25>;
+
+						xbar_i2s6: endpoint {
+							remote-endpoint = <&i2s6_cif>;
+						};
+					};
+
+					xbar_i2s7_port: port@26 {
+						reg = <0x26>;
+
+						xbar_i2s7: endpoint {
+							remote-endpoint = <&i2s7_cif>;
+						};
+					};
+
+					xbar_i2s8_port: port@27 {
+						reg = <0x27>;
+
+						xbar_i2s8: endpoint {
+							remote-endpoint = <&i2s8_cif>;
+						};
+					};
+
+					xbar_dmic1_port: port@28 {
+						reg = <0x28>;
+
+						xbar_dmic1: endpoint {
+							remote-endpoint = <&dmic1_cif>;
+						};
+					};
+
+					xbar_dmic2_port: port@29 {
+						reg = <0x29>;
+
+						xbar_dmic2: endpoint {
+							remote-endpoint = <&dmic2_cif>;
+						};
+					};
+
+					xbar_dspk1_port: port@2a {
+						reg = <0x2a>;
+
+						xbar_dspk1: endpoint {
+							remote-endpoint = <&dspk1_cif>;
+						};
+					};
+
+					xbar_sfc1_in_port: port@2b {
+						reg = <0x2b>;
+
+						xbar_sfc1_in: endpoint {
+							remote-endpoint = <&sfc1_cif_in>;
+						};
+					};
+
+					port@2c {
+						reg = <0x2c>;
+
+						xbar_sfc1_out: endpoint {
+							remote-endpoint = <&sfc1_cif_out>;
+						};
+					};
+
+					xbar_sfc2_in_port: port@2d {
+						reg = <0x2d>;
+
+						xbar_sfc2_in: endpoint {
+							remote-endpoint = <&sfc2_cif_in>;
+						};
+					};
+
+					port@2e {
+						reg = <0x2e>;
+
+						xbar_sfc2_out: endpoint {
+							remote-endpoint = <&sfc2_cif_out>;
+						};
+					};
+
+					xbar_sfc3_in_port: port@2f {
+						reg = <0x2f>;
+
+						xbar_sfc3_in: endpoint {
+							remote-endpoint = <&sfc3_cif_in>;
+						};
+					};
+
+					port@30 {
+						reg = <0x30>;
+
+						xbar_sfc3_out: endpoint {
+							remote-endpoint = <&sfc3_cif_out>;
+						};
+					};
+
+					xbar_sfc4_in_port: port@31 {
+						reg = <0x31>;
+
+						xbar_sfc4_in: endpoint {
+							remote-endpoint = <&sfc4_cif_in>;
+						};
+					};
+
+					port@32 {
+						reg = <0x32>;
+
+						xbar_sfc4_out: endpoint {
+							remote-endpoint = <&sfc4_cif_out>;
+						};
+					};
+
+					xbar_mvc1_in_port: port@33 {
+						reg = <0x33>;
+
+						xbar_mvc1_in: endpoint {
+							remote-endpoint = <&mvc1_cif_in>;
+						};
+					};
+
+					port@34 {
+						reg = <0x34>;
+
+						xbar_mvc1_out: endpoint {
+							remote-endpoint = <&mvc1_cif_out>;
+						};
+					};
+
+					xbar_mvc2_in_port: port@35 {
+						reg = <0x35>;
+
+						xbar_mvc2_in: endpoint {
+							remote-endpoint = <&mvc2_cif_in>;
+						};
+					};
+
+					port@36 {
+						reg = <0x36>;
+
+						xbar_mvc2_out: endpoint {
+							remote-endpoint = <&mvc2_cif_out>;
+						};
+					};
+
+					xbar_amx1_in1_port: port@37 {
+						reg = <0x37>;
+
+						xbar_amx1_in1: endpoint {
+							remote-endpoint = <&amx1_in1>;
+						};
+					};
+
+					xbar_amx1_in2_port: port@38 {
+						reg = <0x38>;
+
+						xbar_amx1_in2: endpoint {
+							remote-endpoint = <&amx1_in2>;
+						};
+					};
+
+					xbar_amx1_in3_port: port@39 {
+						reg = <0x39>;
+
+						xbar_amx1_in3: endpoint {
+							remote-endpoint = <&amx1_in3>;
+						};
+					};
+
+					xbar_amx1_in4_port: port@3a {
+						reg = <0x3a>;
+
+						xbar_amx1_in4: endpoint {
+							remote-endpoint = <&amx1_in4>;
+						};
+					};
+
+					port@3b {
+						reg = <0x3b>;
+
+						xbar_amx1_out: endpoint {
+							remote-endpoint = <&amx1_out>;
+						};
+					};
+
+					xbar_amx2_in1_port: port@3c {
+						reg = <0x3c>;
+
+						xbar_amx2_in1: endpoint {
+							remote-endpoint = <&amx2_in1>;
+						};
+					};
+
+					xbar_amx2_in2_port: port@3d {
+						reg = <0x3d>;
+
+						xbar_amx2_in2: endpoint {
+							remote-endpoint = <&amx2_in2>;
+						};
+					};
+
+					xbar_amx2_in3_port: port@3e {
+						reg = <0x3e>;
+
+						xbar_amx2_in3: endpoint {
+							remote-endpoint = <&amx2_in3>;
+						};
+					};
+
+					xbar_amx2_in4_port: port@3f {
+						reg = <0x3f>;
+
+						xbar_amx2_in4: endpoint {
+							remote-endpoint = <&amx2_in4>;
+						};
+					};
+
+					port@40 {
+						reg = <0x40>;
+
+						xbar_amx2_out: endpoint {
+							remote-endpoint = <&amx2_out>;
+						};
+					};
+
+					xbar_amx3_in1_port: port@41 {
+						reg = <0x41>;
+
+						xbar_amx3_in1: endpoint {
+							remote-endpoint = <&amx3_in1>;
+						};
+					};
+
+					xbar_amx3_in2_port: port@42 {
+						reg = <0x42>;
+
+						xbar_amx3_in2: endpoint {
+							remote-endpoint = <&amx3_in2>;
+						};
+					};
+
+					xbar_amx3_in3_port: port@43 {
+						reg = <0x43>;
+
+						xbar_amx3_in3: endpoint {
+							remote-endpoint = <&amx3_in3>;
+						};
+					};
+
+					xbar_amx3_in4_port: port@44 {
+						reg = <0x44>;
+
+						xbar_amx3_in4: endpoint {
+							remote-endpoint = <&amx3_in4>;
+						};
+					};
+
+					port@45 {
+						reg = <0x45>;
+
+						xbar_amx3_out: endpoint {
+							remote-endpoint = <&amx3_out>;
+						};
+					};
+
+					xbar_amx4_in1_port: port@46 {
+						reg = <0x46>;
+
+						xbar_amx4_in1: endpoint {
+							remote-endpoint = <&amx4_in1>;
+						};
+					};
+
+					xbar_amx4_in2_port: port@47 {
+						reg = <0x47>;
+
+						xbar_amx4_in2: endpoint {
+							remote-endpoint = <&amx4_in2>;
+						};
+					};
+
+					xbar_amx4_in3_port: port@48 {
+						reg = <0x48>;
+
+						xbar_amx4_in3: endpoint {
+							remote-endpoint = <&amx4_in3>;
+						};
+					};
+
+					xbar_amx4_in4_port: port@49 {
+						reg = <0x49>;
+
+						xbar_amx4_in4: endpoint {
+							remote-endpoint = <&amx4_in4>;
+						};
+					};
+
+					port@4a {
+						reg = <0x4a>;
+
+						xbar_amx4_out: endpoint {
+							remote-endpoint = <&amx4_out>;
+						};
+					};
+
+					xbar_amx5_in1_port: port@4b {
+						reg = <0x4b>;
+
+						xbar_amx5_in1: endpoint {
+							remote-endpoint = <&amx5_in1>;
+						};
+					};
+
+					xbar_amx5_in2_port: port@4c {
+						reg = <0x4c>;
+
+						xbar_amx5_in2: endpoint {
+							remote-endpoint = <&amx5_in2>;
+						};
+					};
+
+					xbar_amx5_in3_port: port@4d {
+						reg = <0x4d>;
+
+						xbar_amx5_in3: endpoint {
+							remote-endpoint = <&amx5_in3>;
+						};
+					};
+
+					xbar_amx5_in4_port: port@4e {
+						reg = <0x4e>;
+
+						xbar_amx5_in4: endpoint {
+							remote-endpoint = <&amx5_in4>;
+						};
+					};
+
+					port@4f {
+						reg = <0x4f>;
+
+						xbar_amx5_out: endpoint {
+							remote-endpoint = <&amx5_out>;
+						};
+					};
+
+					xbar_amx6_in1_port: port@50 {
+						reg = <0x50>;
+
+						xbar_amx6_in1: endpoint {
+							remote-endpoint = <&amx6_in1>;
+						};
+					};
+
+					xbar_amx6_in2_port: port@51 {
+						reg = <0x51>;
+
+						xbar_amx6_in2: endpoint {
+							remote-endpoint = <&amx6_in2>;
+						};
+					};
+
+					xbar_amx6_in3_port: port@52 {
+						reg = <0x52>;
+
+						xbar_amx6_in3: endpoint {
+							remote-endpoint = <&amx6_in3>;
+						};
+					};
+
+					xbar_amx6_in4_port: port@53 {
+						reg = <0x53>;
+
+						xbar_amx6_in4: endpoint {
+							remote-endpoint = <&amx6_in4>;
+						};
+					};
+
+					port@54 {
+						reg = <0x54>;
+
+						xbar_amx6_out: endpoint {
+							remote-endpoint = <&amx6_out>;
+						};
+					};
+
+					xbar_adx1_in_port: port@55 {
+						reg = <0x55>;
+
+						xbar_adx1_in: endpoint {
+							remote-endpoint = <&adx1_in>;
+						};
+					};
+
+					port@56 {
+						reg = <0x56>;
+
+						xbar_adx1_out1: endpoint {
+							remote-endpoint = <&adx1_out1>;
+						};
+					};
+
+					port@57 {
+						reg = <0x57>;
+
+						xbar_adx1_out2: endpoint {
+							remote-endpoint = <&adx1_out2>;
+						};
+					};
+
+					port@58 {
+						reg = <0x58>;
+
+						xbar_adx1_out3: endpoint {
+							remote-endpoint = <&adx1_out3>;
+						};
+					};
+
+					port@59 {
+						reg = <0x59>;
+
+						xbar_adx1_out4: endpoint {
+							remote-endpoint = <&adx1_out4>;
+						};
+					};
+
+					xbar_adx2_in_port: port@5a {
+						reg = <0x5a>;
+
+						xbar_adx2_in: endpoint {
+							remote-endpoint = <&adx2_in>;
+						};
+					};
+
+					port@5b {
+						reg = <0x5b>;
+
+						xbar_adx2_out1: endpoint {
+							remote-endpoint = <&adx2_out1>;
+						};
+					};
+
+					port@5c {
+						reg = <0x5c>;
+
+						xbar_adx2_out2: endpoint {
+							remote-endpoint = <&adx2_out2>;
+						};
+					};
+
+					port@5d {
+						reg = <0x5d>;
+
+						xbar_adx2_out3: endpoint {
+							remote-endpoint = <&adx2_out3>;
+						};
+					};
+
+					port@5e {
+						reg = <0x5e>;
+
+						xbar_adx2_out4: endpoint {
+							remote-endpoint = <&adx2_out4>;
+						};
+					};
+
+					xbar_adx3_in_port: port@5f {
+						reg = <0x5f>;
+
+						xbar_adx3_in: endpoint {
+							remote-endpoint = <&adx3_in>;
+						};
+					};
+
+					port@60 {
+						reg = <0x60>;
+
+						xbar_adx3_out1: endpoint {
+							remote-endpoint = <&adx3_out1>;
+						};
+					};
+
+					port@61 {
+						reg = <0x61>;
+
+						xbar_adx3_out2: endpoint {
+							remote-endpoint = <&adx3_out2>;
+						};
+					};
+
+					port@62 {
+						reg = <0x62>;
+
+						xbar_adx3_out3: endpoint {
+							remote-endpoint = <&adx3_out3>;
+						};
+					};
+
+					port@63 {
+						reg = <0x63>;
+
+						xbar_adx3_out4: endpoint {
+							remote-endpoint = <&adx3_out4>;
+						};
+					};
+
+					xbar_adx4_in_port: port@64 {
+						reg = <0x64>;
+
+						xbar_adx4_in: endpoint {
+							remote-endpoint = <&adx4_in>;
+						};
+					};
+
+					port@65 {
+						reg = <0x65>;
+
+						xbar_adx4_out1: endpoint {
+							remote-endpoint = <&adx4_out1>;
+						};
+					};
+
+					port@66 {
+						reg = <0x66>;
+
+						xbar_adx4_out2: endpoint {
+							remote-endpoint = <&adx4_out2>;
+						};
+					};
+
+					port@67 {
+						reg = <0x67>;
+
+						xbar_adx4_out3: endpoint {
+							remote-endpoint = <&adx4_out3>;
+						};
+					};
+
+					port@68 {
+						reg = <0x68>;
+
+						xbar_adx4_out4: endpoint {
+							remote-endpoint = <&adx4_out4>;
+						};
+					};
+
+					xbar_adx5_in_port: port@69 {
+						reg = <0x69>;
+
+						xbar_adx5_in: endpoint {
+							remote-endpoint = <&adx5_in>;
+						};
+					};
+
+					port@6a {
+						reg = <0x6a>;
+
+						xbar_adx5_out1: endpoint {
+							remote-endpoint = <&adx5_out1>;
+						};
+					};
+
+					port@6b {
+						reg = <0x6b>;
+
+						xbar_adx5_out2: endpoint {
+							remote-endpoint = <&adx5_out2>;
+						};
+					};
+
+					port@6c {
+						reg = <0x6c>;
+
+						xbar_adx5_out3: endpoint {
+							remote-endpoint = <&adx5_out3>;
+						};
+					};
+
+					port@6d {
+						reg = <0x6d>;
+
+						xbar_adx5_out4: endpoint {
+							remote-endpoint = <&adx5_out4>;
+						};
+					};
+
+					xbar_adx6_in_port: port@6e {
+						reg = <0x6e>;
+
+						xbar_adx6_in: endpoint {
+							remote-endpoint = <&adx6_in>;
+						};
+					};
+
+					port@6f {
+						reg = <0x6f>;
+
+						xbar_adx6_out1: endpoint {
+							remote-endpoint = <&adx6_out1>;
+						};
+					};
+
+					port@70 {
+						reg = <0x70>;
+
+						xbar_adx6_out2: endpoint {
+							remote-endpoint = <&adx6_out2>;
+						};
+					};
+
+					port@71 {
+						reg = <0x71>;
+
+						xbar_adx6_out3: endpoint {
+							remote-endpoint = <&adx6_out3>;
+						};
+					};
+
+					port@72 {
+						reg = <0x72>;
+
+						xbar_adx6_out4: endpoint {
+							remote-endpoint = <&adx6_out4>;
+						};
+					};
+
+					xbar_mix_in1_port: port@73 {
+						reg = <0x73>;
+
+						xbar_mix_in1: endpoint {
+							remote-endpoint = <&mix_in1>;
+						};
+					};
+
+					xbar_mix_in2_port: port@74 {
+						reg = <0x74>;
+
+						xbar_mix_in2: endpoint {
+							remote-endpoint = <&mix_in2>;
+						};
+					};
+
+					xbar_mix_in3_port: port@75 {
+						reg = <0x75>;
+
+						xbar_mix_in3: endpoint {
+							remote-endpoint = <&mix_in3>;
+						};
+					};
+
+					xbar_mix_in4_port: port@76 {
+						reg = <0x76>;
+
+						xbar_mix_in4: endpoint {
+							remote-endpoint = <&mix_in4>;
+						};
+					};
+
+					xbar_mix_in5_port: port@77 {
+						reg = <0x77>;
+
+						xbar_mix_in5: endpoint {
+							remote-endpoint = <&mix_in5>;
+						};
+					};
+
+					xbar_mix_in6_port: port@78 {
+						reg = <0x78>;
+
+						xbar_mix_in6: endpoint {
+							remote-endpoint = <&mix_in6>;
+						};
+					};
+
+					xbar_mix_in7_port: port@79 {
+						reg = <0x79>;
+
+						xbar_mix_in7: endpoint {
+							remote-endpoint = <&mix_in7>;
+						};
+					};
+
+					xbar_mix_in8_port: port@7a {
+						reg = <0x7a>;
+
+						xbar_mix_in8: endpoint {
+							remote-endpoint = <&mix_in8>;
+						};
+					};
+
+					xbar_mix_in9_port: port@7b {
+						reg = <0x7b>;
+
+						xbar_mix_in9: endpoint {
+							remote-endpoint = <&mix_in9>;
+						};
+					};
+
+					xbar_mix_in10_port: port@7c {
+						reg = <0x7c>;
+
+						xbar_mix_in10: endpoint {
+							remote-endpoint = <&mix_in10>;
+						};
+					};
+
+					port@7d {
+						reg = <0x7d>;
+
+						xbar_mix_out1: endpoint {
+							remote-endpoint = <&mix_out1>;
+						};
+					};
+
+					port@7e {
+						reg = <0x7e>;
+
+						xbar_mix_out2: endpoint {
+							remote-endpoint = <&mix_out2>;
+						};
+					};
+
+					port@7f {
+						reg = <0x7f>;
+
+						xbar_mix_out3: endpoint {
+							remote-endpoint = <&mix_out3>;
+						};
+					};
+
+					port@80 {
+						reg = <0x80>;
+
+						xbar_mix_out4: endpoint {
+							remote-endpoint = <&mix_out4>;
+						};
+					};
+
+					port@81 {
+						reg = <0x81>;
+
+						xbar_mix_out5: endpoint {
+							remote-endpoint = <&mix_out5>;
+						};
+					};
+
+					xbar_asrc_in1_port: port@82 {
+						reg = <0x82>;
+
+						xbar_asrc_in1_ep: endpoint {
+							remote-endpoint = <&asrc_in1_ep>;
+						};
+					};
+
+					port@83 {
+						reg = <0x83>;
+
+						xbar_asrc_out1_ep: endpoint {
+							remote-endpoint = <&asrc_out1_ep>;
+						};
+					};
+
+					xbar_asrc_in2_port: port@84 {
+						reg = <0x84>;
+
+						xbar_asrc_in2_ep: endpoint {
+							remote-endpoint = <&asrc_in2_ep>;
+						};
+					};
+
+					port@85 {
+						reg = <0x85>;
+
+						xbar_asrc_out2_ep: endpoint {
+							remote-endpoint = <&asrc_out2_ep>;
+						};
+					};
+
+					xbar_asrc_in3_port: port@86 {
+						reg = <0x86>;
+
+						xbar_asrc_in3_ep: endpoint {
+							remote-endpoint = <&asrc_in3_ep>;
+						};
+					};
+
+					port@87 {
+						reg = <0x87>;
+
+						xbar_asrc_out3_ep: endpoint {
+							remote-endpoint = <&asrc_out3_ep>;
+						};
+					};
+
+					xbar_asrc_in4_port: port@88 {
+						reg = <0x88>;
+
+						xbar_asrc_in4_ep: endpoint {
+							remote-endpoint = <&asrc_in4_ep>;
+						};
+					};
+
+					port@89 {
+						reg = <0x89>;
+
+						xbar_asrc_out4_ep: endpoint {
+							remote-endpoint = <&asrc_out4_ep>;
+						};
+					};
+
+					xbar_asrc_in5_port: port@8a {
+						reg = <0x8a>;
+
+						xbar_asrc_in5_ep: endpoint {
+							remote-endpoint = <&asrc_in5_ep>;
+						};
+					};
+
+					port@8b {
+						reg = <0x8b>;
+
+						xbar_asrc_out5_ep: endpoint {
+							remote-endpoint = <&asrc_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in6_port: port@8c {
+						reg = <0x8c>;
+
+						xbar_asrc_in6_ep: endpoint {
+							remote-endpoint = <&asrc_in6_ep>;
+						};
+					};
+
+					port@8d {
+						reg = <0x8d>;
+
+						xbar_asrc_out6_ep: endpoint {
+							remote-endpoint = <&asrc_out6_ep>;
+						};
+					};
+
+					xbar_asrc_in7_port: port@8e {
+						reg = <0x8e>;
+
+						xbar_asrc_in7_ep: endpoint {
+							remote-endpoint = <&asrc_in7_ep>;
+						};
+					};
+
+					xbar_ope1_in_port: port@8f {
+						reg = <0x8f>;
+
+						xbar_ope1_in_ep: endpoint {
+							remote-endpoint = <&ope1_cif_in_ep>;
+						};
+					};
+
+					port@90 {
+						reg = <0x90>;
+
+						xbar_ope1_out_ep: endpoint {
+							remote-endpoint = <&ope1_cif_out_ep>;
+						};
+					};
+				};
+			};
+
+			agic_page0: interrupt-controller@9960000 {
+				compatible = "nvidia,tegra264-agic",
+						"nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x0 0x9961000 0x0 0x1000>,
+					<0x0 0x9962000 0x0 0x1000>;
+				interrupts = <GIC_SPI 0x230
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA264_CLK_ADSP>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+
+			agic_page1: interrupt-controller@9970000 {
+				compatible = "nvidia,tegra264-agic",
+					   "nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x0 0x9971000 0x0 0x1000>,
+					<0x0 0x9972000 0x0 0x1000>;
+				interrupts = <GIC_SPI 0x231
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA264_CLK_ADSP>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+
+			agic_page2: interrupt-controller@9980000 {
+				compatible = "nvidia,tegra264-agic",
+						"nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x0 0x9981000 0x0 0x1000>,
+					<0x0 0x9982000 0x0 0x1000>;
+				interrupts = <GIC_SPI 0x232
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA264_CLK_ADSP>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+
+			agic_page3: interrupt-controller@9990000 {
+				compatible = "nvidia,tegra264-agic",
+						"nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x0 0x9991000 0x0 0x1000>,
+					<0x0 0x9992000 0x0 0x1000>;
+				interrupts = <GIC_SPI 0x233
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA264_CLK_ADSP>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+
+			agic_page4: interrupt-controller@99a0000 {
+				compatible = "nvidia,tegra264-agic",
+						"nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x0 0x99a1000 0x0 0x1000>,
+					<0x0 0x99a2000 0x0 0x1000>;
+				interrupts = <GIC_SPI 0x234
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA264_CLK_ADSP>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+
+			agic_page5: interrupt-controller@99b0000 {
+				compatible = "nvidia,tegra264-agic",
+						"nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x0 0x99b1000 0x0 0x1000>,
+					<0x0 0x99b2000 0x0 0x1000>;
+				interrupts = <GIC_SPI 0x235
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA264_CLK_ADSP>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+		};
+
+		gpcdma: dma-controller@8400000 {
+			compatible = "nvidia,tegra264-gpcdma", "nvidia,tegra186-gpcdma";
+			reg = <0x0 0x08400000 0x0 0x210000>;
+			interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&smmu1 0x00000800>;
+			dma-coherent;
+			dma-channel-mask = <0xfffffffe>;
+			status = "disabled";
+		};
+
+		hsp_top: hsp@8800000 {
+			compatible = "nvidia,tegra264-hsp";
+			reg = <0x0 0x08800000 0x0 0xd0000>;
+			interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 623 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 624 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 626 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "doorbell", "shared0", "shared1", "shared2",
+					  "shared3", "shared4", "shared5", "shared6",
+					  "shared7";
+			#mbox-cells = <2>;
+		};
+
+		rtc: rtc@c2c0000 {
+			compatible = "nvidia,tegra264-rtc", "nvidia,tegra20-rtc";
+			reg = <0x0 0x0c2c0000 0x0 0x10000>;
+			interrupt-parent = <&pmc>;
+			interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA264_CLK_CLK_S>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		serial@c4e0000 {
+			compatible = "nvidia,tegra264-utc";
+			reg = <0x0 0x0c4e0000 0x0 0x8000>,
+			      <0x0 0x0c4e8000 0x0 0x8000>;
+			reg-names = "tx", "rx";
+			interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>;
+			rx-threshold = <4>;
+			tx-threshold = <4>;
+			status = "disabled";
+		};
+
+		serial@c5a0000 {
+			compatible = "nvidia,tegra264-utc";
+			reg = <0x0 0x0c5a0000 0x0 0x8000>,
+			      <0x0 0x0c5a8000 0x0 0x8000>;
+			reg-names = "tx", "rx";
+			interrupts = <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>;
+			rx-threshold = <4>;
+			tx-threshold = <4>;
+			status = "disabled";
+		};
+
+		uart0: serial@c5f0000 {
+			compatible = "arm,sbsa-uart";
+			reg = <0x0 0x0c5f0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@c600000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x0 0x0c600000 0x0 0x10000>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_AON_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLAON>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_AON_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON>;
+			resets = <&bpmp TEGRA264_RESET_I2C2>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c3: i2c@c610000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x0 0x0c610000 0x0 0x10000>;
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_AON_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLAON>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_AON_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON>;
+			resets = <&bpmp TEGRA264_RESET_I2C3>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		pmc: pmc@c800000 {
+			compatible = "nvidia,tegra264-pmc";
+			reg = <0x0 0x0c800000 0x0 0x100000>,
+			      <0x0 0x0c990000 0x0 0x10000>,
+			      <0x0 0x0ca00000 0x0 0x10000>,
+			      <0x0 0x0c980000 0x0 0x10000>,
+			      <0x0 0x0c9c0000 0x0 0x40000>;
+			reg-names = "pmc", "wake", "aotag", "scratch", "misc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+	};
+
+	/* TOP_MMIO */
+	bus@8100000000 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000 0x81 0x00000000 0x01 0x00000000>, /* MMIO */
+			 <0x01 0x00000000 0x00 0x20000000 0x00 0x40000000>, /* non-prefetchable memory (32-bit) */
+			 <0x02 0x00000000 0xd0 0x00000000 0x08 0x80000000>; /* ECAM, prefetchable memory, I/O */
+
+		smmu1: iommu@5000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x00 0x5000000 0x0 0x200000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 13 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			status = "disabled";
+
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		smmu2: iommu@6000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x00 0x6000000 0x0 0x200000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			status = "disabled";
+
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		mc: memory-controller@8020000 {
+			compatible = "nvidia,tegra264-mc";
+			reg = <0x00 0x8020000 0x0 0x20000>, /* MC broadcast */
+			      <0x00 0x8040000 0x0 0x20000>, /* MC  0 */
+			      <0x00 0x8060000 0x0 0x20000>, /* MC  1 */
+			      <0x00 0x8080000 0x0 0x20000>, /* MC  2 */
+			      <0x00 0x80a0000 0x0 0x20000>, /* MC  3 */
+			      <0x00 0x80c0000 0x0 0x20000>, /* MC  4 */
+			      <0x00 0x80e0000 0x0 0x20000>, /* MC  5 */
+			      <0x00 0x8100000 0x0 0x20000>, /* MC  6 */
+			      <0x00 0x8120000 0x0 0x20000>, /* MC  7 */
+			      <0x00 0x8140000 0x0 0x20000>, /* MC  8 */
+			      <0x00 0x8160000 0x0 0x20000>, /* MC  9 */
+			      <0x00 0x8180000 0x0 0x20000>, /* MC 10 */
+			      <0x00 0x81a0000 0x0 0x20000>, /* MC 11 */
+			      <0x00 0x81c0000 0x0 0x20000>, /* MC 12 */
+			      <0x00 0x81e0000 0x0 0x20000>, /* MC 13 */
+			      <0x00 0x8200000 0x0 0x20000>, /* MC 14 */
+			      <0x00 0x8220000 0x0 0x20000>; /* MC 15 */
+			reg-names = "broadcast", "ch0", "ch1", "ch2", "ch3",
+				    "ch4", "ch5", "ch6", "ch7", "ch8", "ch9",
+				    "ch10", "ch11", "ch12", "ch13", "ch14",
+				    "ch15";
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			#interconnect-cells = <1>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			/* limit the DMA range for memory clients to [39:0] */
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+			emc: external-memory-controller@8800000 {
+				compatible = "nvidia,tegra264-emc";
+				reg = <0x00 0x8800000 0x0 0x20000>,
+				      <0x00 0x8890000 0x0 0x20000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA264_CLK_EMC>;
+				clock-names = "emc";
+
+				#interconnect-cells = <0>;
+				nvidia,bpmp = <&bpmp>;
+			};
+		};
+
+		smmu0: iommu@a000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x00 0xa000000 0x0 0x200000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			status = "disabled";
+
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		smmu4: iommu@b000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x00 0xb000000 0x0 0x200000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			status = "disabled";
+
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		i2c14: i2c@c410000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c410000 0x0 0x10000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C14>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c15: i2c@c420000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c420000 0x0 0x10000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C15>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c16: i2c@c430000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c430000 0x0 0x10000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C16>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c0: i2c@c630000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c630000 0x0 0x10000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C0>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c1: i2c@c640000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c640000 0x0 0x10000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C1>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c4: i2c@c650000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c650000 0x0 0x10000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C4>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c6: i2c@c670000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c670000 0x0 0x10000>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C6>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c7: i2c@c680000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c680000 0x0 0x10000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C7>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c8: i2c@c690000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c690000 0x0 0x10000>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C8>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c9: i2c@c6a0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C9>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c10: i2c@c6b0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6b0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C10>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c11: i2c@c6c0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6c0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C11>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c12: i2c@c6d0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6d0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C12>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@46000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x00 0x46000000 0x0 0x010000>, /* GICD */
+			      <0x00 0x46080000 0x0 0x400000>; /* GICR */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+			redistributor-stride = <0x0 0x40000>;
+			#redistributor-regions = <1>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			ranges = <0x0 0x0 0x00 0x46000000 0x0 0x1000000>;
+
+			its: msi-controller@40000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x40000 0x0 0x40000>;
+				#msi-cells = <1>;
+				msi-controller;
+			};
+		};
+	};
+
+	/* DISP_USB MMIO */
+	bus@8800000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000 0x88 0x00000000 0x01 0x00000000>;
+
+		smmu3: iommu@6000000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x00 0x6000000 0x0 0x200000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 226 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			status = "disabled";
+
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		hda@90b0000 {
+			compatible = "nvidia,tegra264-hda";
+			reg = <0x0 0x90b0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA264_CLK_AZA_2XBIT>;
+			clock-names = "hda";
+			resets = <&bpmp TEGRA264_RESET_HDA>,
+				 <&bpmp TEGRA264_RESET_HDACODEC>;
+			reset-names = "hda", "hda2codec_2x";
+			interconnects = <&mc TEGRA264_MEMORY_CLIENT_HDAR &emc>,
+					<&mc TEGRA264_MEMORY_CLIENT_HDAW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu3 TEGRA264_SID_HDA>;
+			status = "disabled";
+		};
+	};
+
+	/* UPHY MMIO */
+	bus@a800000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x00000000 0xa8 0x00000000 0x40 0x00000000>, /* MMIO, ECAM, prefetchable memory, I/O */
+			 <0x80 0x00000000 0x00 0x20000000 0x00 0x40000000>; /* non-prefetchable memory (32-bit) */
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x00000>;
+			status = "okay";
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x10000>;
+			status = "okay";
+
+			enable-method = "psci";
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+		};
+	};
+
+	bpmp: bpmp {
+		compatible = "nvidia,tegra264-bpmp", "nvidia,tegra186-bpmp";
+		mboxes = <&hsp_top TEGRA_HSP_MBOX_TYPE_DB
+				   TEGRA_HSP_DB_MASTER_BPMP>;
+		memory-region = <&shmem_bpmp>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+
+		i2c {
+			compatible = "nvidia,tegra186-bpmp-i2c";
+			nvidia,bpmp-bus-id = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		thermal {
+			compatible = "nvidia,tegra186-bpmp-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
+	sound {
+		compatible = "nvidia,tegra264-audio-graph-card";
+
+		clocks = <&bpmp TEGRA264_CLK_PLLA1>,
+				<&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+		clock-names = "pll_a", "plla_out0";
+		assigned-clocks = <&bpmp TEGRA264_CLK_PLLA1>,
+			<&bpmp TEGRA264_CLK_PLLA1_OUT1>,
+			<&bpmp TEGRA264_CLK_AUD_MCLK>;
+		assigned-clock-parents = <0>,
+			<&bpmp TEGRA264_CLK_PLLA1>,
+			<&bpmp TEGRA264_CLK_PLLA1_OUT1>;
+
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6ca8db4b8afe..6f34d5ed331c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,21 +1,26 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 
-apq8016-sbc-usb-host-dtbs	:= apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo
+apq8016-sbc-d3-camera-mezzanine-dtbs	:= apq8016-sbc.dtb apq8016-sbc-d3-camera-mezzanine.dtbo
+apq8016-sbc-usb-host-dtbs		:= apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM) += sar2130p-qar2130p.dtb
 
-dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-usb-host.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-d3-camera-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-usb-host.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-schneider-hmibsc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8039-t2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= hamoa-iot-evk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-tplink-archer-ax55-v1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp441.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5424-rdp466.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
@@ -25,6 +30,14 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp433.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp449.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp453.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp454.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk.dtb
+
+lemans-evk-camera-csi1-imx577-dtbs	:= lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo
+lemans-evk-camera-dtbs	:= lemans-evk.dtb lemans-evk-camera.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-camera-csi1-imx577.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-camera.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= monaco-evk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8216-samsung-fortuna3g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
@@ -59,13 +72,17 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt86518.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt86528.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8917-xiaomi-riva.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8929-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8937-xiaomi-land.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-asus-z00t.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-wingtech-wt82918.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-flipkart-rimob.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
@@ -73,6 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-tissot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-vince.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-kugo.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-suzu.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8976-longcheer-l9360.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-10.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-h815.dtb
@@ -107,10 +125,20 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-fairphone-fp5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-particle-tachyon.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs615-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-radxa-dragon-q6a.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
+
+qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo
+qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-industrial-mezzanine.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-industrial-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-vision-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
@@ -128,7 +156,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride-r3.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
+sc7180-acer-aspire1-el2-dtbs	:= sc7180-acer-aspire1.dtb sc7180-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb sc7180-acer-aspire1-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
@@ -194,9 +223,16 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-arcata.dtb
+sc8280xp-crd-el2-dtbs	:= sc8280xp-crd.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb sc8280xp-crd-el2.dtb
+sc8280xp-huawei-gaokun3-el2-dtbs	:= sc8280xp-huawei-gaokun3.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-huawei-gaokun3.dtb sc8280xp-huawei-gaokun3-el2.dtb
+sc8280xp-lenovo-thinkpad-x13s-el2-dtbs	:= sc8280xp-lenovo-thinkpad-x13s.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb sc8280xp-lenovo-thinkpad-x13s-el2.dtb
+sc8280xp-microsoft-arcata-el2-dtbs	:= sc8280xp-microsoft-arcata.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-arcata.dtb sc8280xp-microsoft-arcata-el2.dtb
+sc8280xp-microsoft-blackrock-el2-dtbs	:= sc8280xp-microsoft-blackrock.dtb sc8280xp-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-blackrock.dtb sc8280xp-microsoft-blackrock-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-lenovo-tbx605f.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-motorola-ali.dtb
@@ -209,9 +245,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-motorola-ocean.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
 
 sdm845-db845c-navigation-mezzanine-dtbs	:= sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine.dtbo
@@ -230,6 +263,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium-ebbg.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium-tianma.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-polaris.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-huawei-matebook-e-2019.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdx75-idp.dtb
@@ -238,6 +272,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115p-lenovo-j606f.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-ginkgo.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
@@ -252,6 +287,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-sony-xperia-kumano-bahamut.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-sony-xperia-kumano-griffin.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-samsung-r8q.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-samsung-x1q.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-boe.dtb
@@ -264,8 +301,13 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx214.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx215.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-samsung-r0q.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
+
+sm8550-hdk-rear-camera-card-dtbs	:= sm8550-hdk.dtb sm8550-hdk-rear-camera-card.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-hdk-rear-camera-card.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
@@ -278,11 +320,45 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-hdk-display-card.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-vivobook-s15.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-xps13-9345.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-lenovo-yoga-slim7x.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus13.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus15.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-qcp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8750-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8750-qrd.dtb
+x1e001de-devkit-el2-dtbs	:= x1e001de-devkit.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e001de-devkit.dtb x1e001de-devkit-el2.dtb
+x1e78100-lenovo-thinkpad-t14s-el2-dtbs	:= x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s.dtb x1e78100-lenovo-thinkpad-t14s-el2.dtb
+x1e78100-lenovo-thinkpad-t14s-oled-el2-dtbs	:= x1e78100-lenovo-thinkpad-t14s-oled.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s-oled.dtb x1e78100-lenovo-thinkpad-t14s-oled-el2.dtb
+x1e80100-asus-vivobook-s15-el2-dtbs	:= x1e80100-asus-vivobook-s15.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-vivobook-s15.dtb x1e80100-asus-vivobook-s15-el2.dtb
+x1e80100-asus-zenbook-a14-el2-dtbs	:= x1e80100-asus-zenbook-a14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-zenbook-a14.dtb x1e80100-asus-zenbook-a14-el2.dtb
+x1e80100-crd-el2-dtbs	:= x1e80100-crd.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb x1e80100-crd-el2.dtb
+x1e80100-dell-inspiron-14-plus-7441-el2-dtbs	:= x1e80100-dell-inspiron-14-plus-7441.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-inspiron-14-plus-7441.dtb x1e80100-dell-inspiron-14-plus-7441-el2.dtb
+x1e80100-dell-latitude-7455-el2-dtbs	:= x1e80100-dell-latitude-7455.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-latitude-7455.dtb x1e80100-dell-latitude-7455-el2.dtb
+x1e80100-dell-xps13-9345-el2-dtbs	:= x1e80100-dell-xps13-9345.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-xps13-9345.dtb x1e80100-dell-xps13-9345-el2.dtb
+x1e80100-hp-elitebook-ultra-g1q-el2-dtbs := x1e80100-hp-elitebook-ultra-g1q.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-hp-elitebook-ultra-g1q.dtb x1e80100-hp-elitebook-ultra-g1q-el2.dtb
+x1e80100-hp-omnibook-x14-el2-dtbs	:= x1e80100-hp-omnibook-x14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-hp-omnibook-x14.dtb x1e80100-hp-omnibook-x14-el2.dtb
+x1e80100-lenovo-yoga-slim7x-el2-dtbs	:= x1e80100-lenovo-yoga-slim7x.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-lenovo-yoga-slim7x.dtb x1e80100-lenovo-yoga-slim7x-el2.dtb
+x1e80100-microsoft-romulus13-el2-dtbs	:= x1e80100-microsoft-romulus13.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus13.dtb x1e80100-microsoft-romulus13-el2.dtb
+x1e80100-microsoft-romulus15-el2-dtbs	:= x1e80100-microsoft-romulus15.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus15.dtb x1e80100-microsoft-romulus15-el2.dtb
+x1e80100-qcp-el2-dtbs	:= x1e80100-qcp.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-qcp.dtb x1e80100-qcp-el2.dtb
+x1p42100-asus-zenbook-a14-el2-dtbs	:= x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
+x1p42100-asus-zenbook-a14-lcd-el2-dtbs	:= x1p42100-asus-zenbook-a14-lcd.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-asus-zenbook-a14-lcd.dtb x1p42100-asus-zenbook-a14-lcd-el2.dtb
+x1p42100-crd-el2-dtbs	:= x1p42100-crd.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-crd.dtb x1p42100-crd-el2.dtb
+x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-hp-omnibook-x14.dtb x1p42100-hp-omnibook-x14-el2.dtb
+x1p42100-lenovo-thinkbook-16-el2-dtbs	:= x1p42100-lenovo-thinkbook-16.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-lenovo-thinkbook-16.dtb x1p42100-lenovo-thinkbook-16-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/agatti.dtsi
index f0746123e594..8bf5c5583fc2 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/agatti.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,qcm2290-gpucc.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -16,6 +17,9 @@
 #include <dt-bindings/interconnect/qcom,qcm2290.h>
 #include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -153,6 +157,7 @@
 			compatible = "qcom,scm-qcm2290", "qcom,scm";
 			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
 			clock-names = "core";
+			qcom,dload-mode = <&tcsr_regs 0x13000>;
 			#reset-cells = <1>;
 			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
 					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
@@ -550,6 +555,20 @@
 				bias-disable;
 			};
 
+			qup_uart1_default: qup-uart1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart3_default: qup-uart3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			qup_uart4_default: qup-uart4-default-state {
 				pins = "gpio12", "gpio13";
 				function = "qup4";
@@ -557,6 +576,27 @@
 				bias-disable;
 			};
 
+			qup_uart5_default: qup-uart5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci0_default: cci0-default-state {
+				pins = "gpio22", "gpio23";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			sdc1_state_on: sdc1-on-state {
 				clk-pins {
 					pins = "sdc1_clk";
@@ -648,6 +688,43 @@
 			};
 		};
 
+		lpass_tlmm: pinctrl@a7c0000 {
+			compatible = "qcom,qcm2290-lpass-lpi-pinctrl",
+				     "qcom,sm6115-lpass-lpi-pinctrl";
+			reg = <0x0 0x0a7c0000 0x0 0x20000>,
+			      <0x0 0x0a950000 0x0 0x10000>;
+
+			clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 19>;
+
+			lpi_i2s2_active: lpi-i2s2-active-state {
+				sck-pins {
+					pins = "gpio10";
+					function = "i2s2_clk";
+					bias-disable;
+					drive-strength = <8>;
+				};
+
+				ws-pins {
+					pins = "gpio11";
+					function = "i2s2_ws";
+					bias-disable;
+					drive-strength = <8>;
+				};
+
+				data-pins {
+					pins = "gpio12";
+					function = "i2s2_data";
+					bias-disable;
+					drive-strength = <8>;
+				};
+			};
+		};
+
 		gcc: clock-controller@1400000 {
 			compatible = "qcom,gcc-qcm2290";
 			reg = <0x0 0x01400000 0x0 0x1f0000>;
@@ -749,6 +826,30 @@
 			#interconnect-cells = <2>;
 		};
 
+		cryptobam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x01b04000 0x0 0x24000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x0084 0x11>,
+				 <&apps_smmu 0x0086 0x11>;
+		};
+
+		crypto: crypto@1b3a000 {
+			compatible = "qcom,qcm2290-qce", "qcom,ipq4019-qce", "qcom,qce";
+			reg = <0x0 0x01b3a000 0x0 0x6000>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x0084 0x11>,
+				 <&apps_smmu 0x0086 0x11>;
+		};
+
 		qfprom@1b44000 {
 			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b44000 0x0 0x3000>;
@@ -921,6 +1022,11 @@
 			qcom,ddr-config = <0x80040868>;
 			bus-width = <8>;
 
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
 			status = "disabled";
 
 			sdhc1_opp_table: opp-table {
@@ -1073,7 +1179,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1092,7 +1198,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				status = "disabled";
@@ -1137,7 +1243,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1145,6 +1251,23 @@
 				status = "disabled";
 			};
 
+			uart1: serial@4a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart1_default>;
+				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c2: i2c@4a88000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a88000 0x0 0x4000>;
@@ -1184,7 +1307,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1231,7 +1354,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1239,6 +1362,23 @@
 				status = "disabled";
 			};
 
+			uart3: serial@4a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart3_default>;
+				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a90000 0x0 0x4000>;
@@ -1278,7 +1418,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
@@ -1297,7 +1437,7 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				status = "disabled";
@@ -1342,13 +1482,30 @@
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
-						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
+
+			uart5: serial@4a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart5_default>;
+				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
 		};
 
 		usb: usb@4ef8800 {
@@ -1405,6 +1562,7 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,parkmode-disable-ss-quirk;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
 				usb-role-switch;
@@ -1467,7 +1625,7 @@
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&pil_gpu_mem>;
 			};
 
@@ -1579,6 +1737,145 @@
 			#iommu-cells = <2>;
 		};
 
+		cci: cci@5c1b000 {
+			compatible = "qcom,qcm2290-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x5c1b000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, <&gcc GCC_CAMSS_CCI_0_CLK>;
+			clock-names = "ahb", "cci";
+			assigned-clocks = <&gcc GCC_CAMSS_CCI_0_CLK>;
+			assigned-clock-rates = <37500000>;
+
+			power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
+
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-names = "default";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: camss@5c11000 {
+			compatible = "qcom,qcm2290-camss";
+
+			reg = <0x0 0x5c11000 0x0 0x1000>,
+			      <0x0 0x5c6e000 0x0 0x1000>,
+			      <0x0 0x5c75000 0x0 0x1000>,
+			      <0x0 0x5c52000 0x0 0x1000>,
+			      <0x0 0x5c53000 0x0 0x1000>,
+			      <0x0 0x5c66000 0x0 0x400>,
+			      <0x0 0x5c68000 0x0 0x400>,
+			      <0x0 0x5c6f000 0x0 0x4000>,
+			      <0x0 0x5c76000 0x0 0x4000>;
+			reg-names = "top",
+				    "csid0",
+				    "csid1",
+				    "csiphy0",
+				    "csiphy1",
+				    "csitpg0",
+				    "csitpg1",
+				    "vfe0",
+				    "vfe1";
+
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&gcc GCC_CAMSS_AXI_CLK>,
+				 <&gcc GCC_CAMSS_NRT_AXI_CLK>,
+				 <&gcc GCC_CAMSS_RT_AXI_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CSID_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CSID_CLK>,
+				 <&gcc GCC_CAMSS_CPHY_0_CLK>,
+				 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+				 <&gcc GCC_CAMSS_CPHY_1_CLK>,
+				 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+				 <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CLK>,
+				 <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CLK>,
+				 <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK> ;
+			clock-names = "ahb",
+				      "axi",
+				      "camnoc_nrt_axi",
+				      "camnoc_rt_axi",
+				      "csi0",
+				      "csi1",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "top_ahb",
+				      "vfe0",
+				      "vfe0_cphy_rx",
+				      "vfe1",
+				      "vfe1_cphy_rx";
+
+			interrupts = <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csitpg0",
+					  "csitpg1",
+					  "vfe0",
+					  "vfe1";
+
+			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>,
+					<&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+			interconnect-names = "ahb",
+					     "hf_mnoc",
+					     "sf_mnoc";
+
+			iommus = <&apps_smmu 0x400 0x0>,
+				 <&apps_smmu 0x800 0x0>,
+				 <&apps_smmu 0x820 0x0>,
+				 <&apps_smmu 0x840 0x0>;
+
+			power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		mdss: display-subsystem@5e00000 {
 			compatible = "qcom,qcm2290-mdss";
 			reg = <0x0 0x05e00000 0x0 0x1000>;
@@ -1616,7 +1913,7 @@
 			mdp: display-controller@5e01000 {
 				compatible = "qcom,qcm2290-dpu";
 				reg = <0x0 0x05e01000 0x0 0x8f000>,
-				      <0x0 0x05eb0000 0x0 0x2008>;
+				      <0x0 0x05eb0000 0x0 0x3000>;
 				reg-names = "mdp",
 					    "vbif";
 
@@ -1702,8 +1999,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd QCM2290_VDDCX>;
@@ -1785,8 +2082,8 @@
 				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>;
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 			clock-names = "bi_tcxo",
 				      "bi_tcxo_ao",
 				      "gcc_disp_gpll0_clk_src",
@@ -1868,6 +2165,76 @@
 				label = "lpass";
 				qcom,remote-pid = <2>;
 				mboxes = <&apcs_glb 8>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1c1 0x0>;
+
+							dai@0 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+							};
+
+							dai@1 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+							};
+
+							dai@2 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
 			};
 		};
 
@@ -1944,6 +2311,61 @@
 				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		venus: video-codec@5a00000 {
+			compatible = "qcom,qcm2290-venus";
+			reg = <0 0x5a00000 0 0xf0000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc GCC_VENUS_GDSC>,
+					<&gcc GCC_VCODEC0_GDSC>,
+					<&rpmpd QCM2290_VDDCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "cx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>,
+				 <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&gcc GCC_VENUS_CTL_AXI_CLK>,
+				 <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>,
+				 <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>,
+				 <&gcc GCC_VCODEC0_AXI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "bus",
+				      "throttle",
+				      "vcodec0_core",
+				      "vcodec0_bus";
+
+			memory-region = <&pil_video_mem>;
+			iommus = <&apps_smmu 0x860 0x0>,
+				 <&apps_smmu 0x880 0x0>,
+				 <&apps_smmu 0x861 0x04>,
+				 <&apps_smmu 0x863 0x0>,
+				 <&apps_smmu 0x804 0xe0>;
+
+			interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>;
+			interconnect-names = "video-mem",
+					     "cpu-cfg";
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133333333 {
+					opp-hz = /bits/ 64 <133333333>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+			};
+		};
+
 		wifi: wifi@c800000 {
 			compatible = "qcom,wcn3990-wifi";
 			reg = <0x0 0x0c800000 0x0 0x800000>;
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso
index f9cbf8c1d689..d739ece6b44f 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso
@@ -5,10 +5,12 @@
  */
 
 /dts-v1/;
+/plugin/;
 
-#include "apq8016-sbc.dts"
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/gpio/gpio.h>
 
-/ {
+&{/} {
 	camera_vdddo_1v8: regulator-camera-vdddo {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vdddo";
@@ -38,6 +40,9 @@
 	status = "okay";
 
 	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		port@0 {
 			reg = <0>;
 			csiphy0_ep: endpoint {
@@ -53,6 +58,9 @@
 };
 
 &cci_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	camera@3b {
 		compatible = "ovti,ov5640";
 		reg = <0x3b>;
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index aba08424aa38..ba6ccf0db16a 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -157,8 +157,6 @@
 	status = "okay";
 
 	adv_bridge: bridge@39 {
-		status = "okay";
-
 		compatible = "adi,adv7533";
 		reg = <0x39>;
 
@@ -181,7 +179,7 @@
 		pinctrl-names = "default","sleep";
 		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
 		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
-		#sound-dai-cells = <1>;
+		#sound-dai-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -222,11 +220,17 @@
 &blsp_uart1 {
 	status = "okay";
 	label = "LS-UART0";
+	pinctrl-0 = <&blsp_uart1_default>;
+	pinctrl-1 = <&blsp_uart1_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &blsp_uart2 {
 	status = "okay";
 	label = "LS-UART1";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &camss {
@@ -340,7 +344,7 @@
 			sound-dai = <&lpass MI2S_QUATERNARY>;
 		};
 		codec {
-			sound-dai = <&adv_bridge 0>;
+			sound-dai = <&adv_bridge>;
 		};
 	};
 
@@ -591,6 +595,21 @@
 		"USR_LED_2_CTRL", /* GPIO 120 */
 		"SB_HS_ID";
 
+	blsp_uart1_default: blsp-uart1-default-state {
+		/* TX, RX, CTS_N, RTS_N */
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	blsp_uart1_sleep: blsp-uart1-sleep-state {
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	sdc2_cd_default: sdc2-cd-default-state {
 		pins = "gpio38";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts b/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
index 75c6137e5a11..ce75046ffdac 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
@@ -190,11 +190,17 @@
 };
 
 &blsp_uart1 {
+	pinctrl-0 = <&blsp_uart1_default>;
+	pinctrl-1 = <&blsp_uart1_sleep>;
+	pinctrl-names = "default", "sleep";
 	label = "UART0";
 	status = "okay";
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_default>;
+	pinctrl-1 = <&blsp_uart2_sleep>;
+	pinctrl-names = "default", "sleep";
 	label = "UART1";
 	status = "okay";
 };
@@ -367,6 +373,37 @@
 		bias-disable;
 	};
 
+	blsp_uart1_default: blsp-uart1-default-state {
+		/* TX, RX, CTS_N, RTS_N */
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+		drive-strength = <16>;
+		bias-disable;
+		bootph-all;
+	};
+
+	blsp_uart1_sleep: blsp-uart1-sleep-state {
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	blsp_uart2_default: blsp-uart2-default-state {
+		/* TX, RX */
+		pins = "gpio4", "gpio5";
+		function = "blsp_uart2";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	blsp_uart2_sleep: blsp-uart2-sleep-state {
+		pins = "gpio4", "gpio5";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	msm_key_volp_n_default: msm-key-volp-n-default-state {
 		pins = "gpio107";
 		function = "gpio";
@@ -463,10 +500,6 @@
 	drive-strength = <16>;
 };
 
-&blsp_uart1_default {
-	bootph-all;
-};
-
 /* Enable CoreSight */
 &cti0 { status = "okay"; };
 &cti1 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
index 4f82bb668616..38c281f0fe65 100644
--- a/arch/arm64/boot/dts/qcom/apq8039-t2.dts
+++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
@@ -116,18 +116,16 @@
 };
 
 &blsp_uart1 {
+	pinctrl-0 = <&blsp_uart1_default>;
+	pinctrl-1 = <&blsp_uart1_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
-&blsp_uart1_default {
-	pins = "gpio0", "gpio1";
-};
-
-&blsp_uart1_sleep {
-	pins = "gpio0", "gpio1";
-};
-
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
@@ -323,6 +321,20 @@
 		"USBC_GPIO7_1V8",	/* GPIO_120 */
 		"NC";
 
+	blsp_uart1_default: blsp-uart1-default-state {
+		pins = "gpio0", "gpio1";
+		function = "blsp_uart1";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	blsp_uart1_sleep: blsp-uart1-sleep-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	pinctrl_backlight: backlight-state {
 		pins = "gpio98";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index e8148b3d6c50..9fa70ff6887b 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -203,6 +203,10 @@
 	status = "okay";
 };
 
+&gpu_zap_shader {
+	firmware-name = "qcom/apq8096/a530_zap.mbn";
+};
+
 &hsusb_phy1 {
 	status = "okay";
 
@@ -953,15 +957,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -1012,10 +1016,7 @@
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "DB820c";
-	audio-routing = "RX_BIAS", "MCLK",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+	audio-routing = "RX_BIAS", "MCLK";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
new file mode 100644
index 000000000000..36dd6599402b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -0,0 +1,1242 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include "hamoa-iot-som.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Hamoa IoT EVK";
+	compatible = "qcom,hamoa-iot-evk", "qcom,hamoa-iot-som", "qcom,x1e80100";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
+							 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	/* Left unused as the retimer is not used on this board. */
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the EVK mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-EVK";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_woofer>,
+					    <&left_tweeter>,
+					    <&swr0 0>,
+					    <&lpass_wsamacro 0>,
+					    <&right_woofer>,
+					    <&right_tweeter>,
+					    <&swr3 0>,
+					    <&lpass_wsa2macro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	usb-1-ss0-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss0_sbu>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&lpass_tlmm {
+	spkr_0_sd_n_active: spkr-0-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	spkr_3_sd_n_active: spkr-3-sd-n-active-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	vddpe-3v3-supply = <&vreg_nvme>;
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		pinctrl-0 = <&spkr_0_sd_n_active>;
+		pinctrl-names = "default";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		pinctrl-0 = <&spkr_3_sd_n_active>;
+		pinctrl-names = "default";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+		mode-pins {
+			pins = "gpio166";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio168";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_bt_en: wcn-bt-en-state {
+		pins = "gpio116";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	/* Switches USB signal routing between the USB connector and the Wi-Fi card. */
+	wcn_usb_sw_n: wcn-usb-sw-n-state {
+		pins = "gpio225";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_hsphy {
+	phys = <&smb2360_0_eusb2_repeater>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_hsphy {
+	phys = <&smb2360_1_eusb2_repeater>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_hsphy {
+	phys = <&smb2360_2_eusb2_repeater>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&retimer_ss2_ss_in>;
+};
+
+&usb_2_hsphy {
+	phys = <&eusb5_repeater>;
+
+	pinctrl-0 = <&wcn_usb_sw_n>;
+	pinctrl-names = "default";
+};
+
+&usb_mp_hsphy0 {
+	phys = <&eusb3_repeater>;
+};
+
+&usb_mp_hsphy1 {
+	phys = <&eusb6_repeater>;
+};
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
new file mode 100644
index 000000000000..4a69852e9176
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
@@ -0,0 +1,618 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include "hamoa.dtsi"
+#include "hamoa-pmics.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/ {
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+};
+
+&apps_rsc {
+	/* PMC8380C_B */
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380VE_C */
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380_D */
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380_E */
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380_F */
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380VE_I */
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380VE_J */
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&iris {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/adsp.mbn",
+			"qcom/x1e80100/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/cdsp.mbn",
+			"qcom/x1e80100/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>; /* TPM LP & INT */
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+
+		};
+	};
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi
index 5b54ee79f048..6a31a0adf8be 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi
@@ -110,7 +110,7 @@
 			};
 		};
 
-		pmc8380-6-thermal {
+		pmc8380_6_thermal: pmc8380-6-thermal {
 			polling-delay-passive = <100>;
 
 			thermal-sensors = <&pmc8380_6_temp_alarm>;
@@ -223,8 +223,8 @@
 			reg = <0x6100>, <0x6200>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
-			/* Not yet sure what blocks access */
-			status = "reserved";
+			qcom,no-alarm; /* alarm owned by ADSP */
+			qcom,uefi-rtc-info;
 		};
 
 		pmk8550_sdam_2: nvram@7100 {
@@ -240,6 +240,26 @@
 			};
 		};
 
+		pmk8550_sdam_15: nvram@7e00 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7e00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7e00 0x100>;
+
+			charge_limit_en: charge-limit-en@73 {
+				reg = <0x73 0x1>;
+			};
+
+			charge_limit_end: charge-limit-end@75 {
+				reg = <0x75 0x1>;
+			};
+
+			charge_limit_delta: charge-limit-delta@76 {
+				reg = <0x76 0x1>;
+			};
+		};
+
 		pmk8550_gpios: gpio@8800 {
 			compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
 			reg = <0xb800>;
@@ -475,6 +495,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		status = "disabled";
+
 		pm8010_temp_alarm: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
@@ -491,6 +513,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		status = "disabled";
+
 		smb2360_0_eusb2_repeater: phy@fd00 {
 			compatible = "qcom,smb2360-eusb2-repeater";
 			reg = <0xfd00>;
@@ -504,6 +528,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		status = "disabled";
+
 		smb2360_1_eusb2_repeater: phy@fd00 {
 			compatible = "qcom,smb2360-eusb2-repeater";
 			reg = <0xfd00>;
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index 88805629ed2b..a17900eacb20 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
 #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
 #include <dt-bindings/clock/qcom,x1e80100-gpucc.h>
@@ -20,6 +21,7 @@
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -38,7 +40,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 
@@ -71,9 +73,8 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
-			power-domains = <&cpu_pd0>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd0>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
 
 			l2_0: l2-cache {
 				compatible = "cache";
@@ -88,9 +89,8 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
-			power-domains = <&cpu_pd1>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd1>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
 		};
 
 		cpu2: cpu@200 {
@@ -99,9 +99,8 @@
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
-			power-domains = <&cpu_pd2>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd2>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
 		};
 
 		cpu3: cpu@300 {
@@ -110,9 +109,8 @@
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
-			power-domains = <&cpu_pd3>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd3>, <&scmi_dvfs 0>;
+			power-domain-names = "psci", "perf";
 		};
 
 		cpu4: cpu@10000 {
@@ -121,9 +119,8 @@
 			reg = <0x0 0x10000>;
 			enable-method = "psci";
 			next-level-cache = <&l2_1>;
-			power-domains = <&cpu_pd4>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd4>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
 
 			l2_1: l2-cache {
 				compatible = "cache";
@@ -138,9 +135,8 @@
 			reg = <0x0 0x10100>;
 			enable-method = "psci";
 			next-level-cache = <&l2_1>;
-			power-domains = <&cpu_pd5>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd5>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
 		};
 
 		cpu6: cpu@10200 {
@@ -149,9 +145,8 @@
 			reg = <0x0 0x10200>;
 			enable-method = "psci";
 			next-level-cache = <&l2_1>;
-			power-domains = <&cpu_pd6>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd6>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
 		};
 
 		cpu7: cpu@10300 {
@@ -160,9 +155,8 @@
 			reg = <0x0 0x10300>;
 			enable-method = "psci";
 			next-level-cache = <&l2_1>;
-			power-domains = <&cpu_pd7>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd7>, <&scmi_dvfs 1>;
+			power-domain-names = "psci", "perf";
 		};
 
 		cpu8: cpu@20000 {
@@ -171,9 +165,8 @@
 			reg = <0x0 0x20000>;
 			enable-method = "psci";
 			next-level-cache = <&l2_2>;
-			power-domains = <&cpu_pd8>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd8>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
 
 			l2_2: l2-cache {
 				compatible = "cache";
@@ -188,9 +181,8 @@
 			reg = <0x0 0x20100>;
 			enable-method = "psci";
 			next-level-cache = <&l2_2>;
-			power-domains = <&cpu_pd9>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd9>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
 		};
 
 		cpu10: cpu@20200 {
@@ -199,9 +191,8 @@
 			reg = <0x0 0x20200>;
 			enable-method = "psci";
 			next-level-cache = <&l2_2>;
-			power-domains = <&cpu_pd10>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd10>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
 		};
 
 		cpu11: cpu@20300 {
@@ -210,9 +201,8 @@
 			reg = <0x0 0x20300>;
 			enable-method = "psci";
 			next-level-cache = <&l2_2>;
-			power-domains = <&cpu_pd11>;
-			power-domain-names = "psci";
-			cpu-idle-states = <&cluster_c4>;
+			power-domains = <&cpu_pd11>, <&scmi_dvfs 2>;
+			power-domain-names = "psci", "perf";
 		};
 
 		cpu-map {
@@ -252,7 +242,7 @@
 				};
 			};
 
-			cluster2 {
+			cpu_map_cluster2: cluster2 {
 				core0 {
 					cpu = <&cpu8>;
 				};
@@ -303,6 +293,18 @@
 		};
 	};
 
+	dummy-sink {
+		compatible = "arm,coresight-dummy-sink";
+
+		in-ports {
+			port {
+				eud_in: endpoint {
+					remote-endpoint = <&swao_rep_out1>;
+				};
+			};
+		};
+	};
+
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-x1e80100", "qcom,scm";
@@ -310,6 +312,21 @@
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 			qcom,dload-mode = <&tcsr 0x19000>;
 		};
+
+		scmi {
+			compatible = "arm,scmi";
+			mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>;
+			mbox-names = "tx", "rx";
+			shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_dvfs: protocol@13 {
+				reg = <0x13>;
+				#power-domain-cells = <1>;
+			};
+		};
 	};
 
 	clk_virt: interconnect-0 {
@@ -342,61 +359,73 @@
 		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd8: power-domain-cpu8 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd2>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd9: power-domain-cpu9 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd2>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd10: power-domain-cpu10 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd2>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cpu_pd11: power-domain-cpu11 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd2>;
+			domain-idle-states = <&cluster_c4>;
 		};
 
 		cluster_pd0: power-domain-cpu-cluster0 {
@@ -677,6 +706,34 @@
 		};
 	};
 
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
 	smp2p-adsp {
 		compatible = "qcom,smp2p";
 
@@ -743,14 +800,41 @@
 
 			clocks = <&bi_tcxo_div2>,
 				 <&sleep_clk>,
-				 <0>,
+				 <&pcie3_phy>,
 				 <&pcie4_phy>,
 				 <&pcie5_phy>,
 				 <&pcie6a_phy>,
 				 <0>,
 				 <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
-				 <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+				 <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
 
 			power-domains = <&rpmhpd RPMHPD_CX>;
 			#clock-cells = <1>;
@@ -823,14 +907,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -856,14 +943,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -889,14 +979,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -922,14 +1015,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -955,14 +1051,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -988,14 +1087,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1021,14 +1123,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1054,14 +1159,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1087,14 +1195,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1120,14 +1231,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1153,14 +1267,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1186,14 +1303,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1219,11 +1339,14 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				pinctrl-0 = <&qup_uart21_default>;
 				pinctrl-names = "default";
 
@@ -1241,14 +1364,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1274,14 +1400,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1307,14 +1436,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1340,14 +1472,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1417,14 +1552,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1450,14 +1588,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1483,14 +1624,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1516,14 +1660,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1549,14 +1696,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1582,14 +1732,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1615,14 +1768,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1648,14 +1804,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1681,14 +1840,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1714,14 +1876,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1747,14 +1912,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1780,14 +1948,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1813,14 +1984,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1846,14 +2020,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1868,6 +2045,31 @@
 				status = "disabled";
 			};
 
+			uart14: serial@a98000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
+				pinctrl-0 = <&qup_uart14_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
 			i2c15: i2c@a9c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a9c000 0 0x4000>;
@@ -1879,14 +2081,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1912,14 +2117,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1988,14 +2196,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2021,14 +2232,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2054,14 +2268,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2087,14 +2304,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2120,14 +2340,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2153,11 +2376,14 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				pinctrl-0 = <&qup_uart2_default>;
 				pinctrl-names = "default";
 
@@ -2175,14 +2401,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2208,14 +2437,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2241,14 +2473,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2274,14 +2509,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2307,14 +2545,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2340,14 +2581,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2373,14 +2617,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2406,14 +2653,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2439,14 +2689,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2472,14 +2725,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2505,14 +2761,17 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2625,6 +2884,7 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			mode-switch;
 			orientation-switch;
 
 			status = "disabled";
@@ -2695,6 +2955,7 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			mode-switch;
 			orientation-switch;
 
 			status = "disabled";
@@ -2765,6 +3026,7 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			mode-switch;
 			orientation-switch;
 
 			status = "disabled";
@@ -2906,6 +3168,281 @@
 			#interconnect-cells = <2>;
 		};
 
+		pcie3: pcie@1bd0000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-x1e80100";
+			reg = <0x0 0x01bd0000 0x0 0x3000>,
+			      <0x0 0x78000000 0x0 0xf20>,
+			      <0x0 0x78000f40 0x0 0xa8>,
+			      <0x0 0x78001000 0x0 0x1000>,
+			      <0x0 0x78100000 0x0 0x100000>,
+			      <0x0 0x01bd3000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x78200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x78300000 0x0 0x78300000 0x0 0x3d00000>,
+				 <0x03000000 0x7 0x40000000 0x7 0x40000000 0x0 0x40000000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <3>;
+			num-lanes = <8>;
+
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_3_AUX_CLK>,
+				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+				 <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_north_anoc MASTER_PCIE_3 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_3 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_3_BCR>,
+				 <&gcc GCC_PCIE_3_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_3_GDSC>;
+
+			phys = <&pcie3_phy>;
+			phy-names = "pciephy";
+
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555
+						     0x5555 0x5555 0x5555 0x5555>;
+			eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55 0x55 0x55 0x55 0x55>;
+
+			operating-points-v2 = <&pcie3_opp_table>;
+
+			status = "disabled";
+
+			pcie3_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* 2.5GT/s x1 */
+				opp-2500000-1 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+					opp-level = <1>;
+				};
+
+				/* 2.5 GT/s x2 */
+				opp-5000000-1 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <1>;
+				};
+
+				/* 2.5 GT/s x4 */
+				opp-10000000-1 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+					opp-level = <1>;
+				};
+
+				/* 2.5 GT/s x8 */
+				opp-20000000-1 {
+					opp-hz = /bits/ 64 <20000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <2000000 1>;
+					opp-level = <1>;
+				};
+
+				/* 5 GT/s x1 */
+				opp-5000000-2 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <2>;
+				};
+
+				/* 5 GT/s x2 */
+				opp-10000000-2 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+					opp-level = <2>;
+				};
+
+				/* 5 GT/s x4 */
+				opp-20000000-2 {
+					opp-hz = /bits/ 64 <20000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <2000000 1>;
+					opp-level = <2>;
+				};
+
+				/* 5 GT/s x8 */
+				opp-40000000-2 {
+					opp-hz = /bits/ 64 <40000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <4000000 1>;
+					opp-level = <2>;
+				};
+
+				/* 8 GT/s x1 */
+				opp-8000000-3 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <984500 1>;
+					opp-level = <3>;
+				};
+
+				/* 8 GT/s x2 */
+				opp-16000000-3 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <1969000 1>;
+					opp-level = <3>;
+				};
+
+				/* 8 GT/s x4 */
+				opp-32000000-3 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <3938000 1>;
+					opp-level = <3>;
+				};
+
+				/* 8 GT/s x8 */
+				opp-64000000-3 {
+					opp-hz = /bits/ 64 <64000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <7876000 1>;
+					opp-level = <3>;
+				};
+
+				/* 16 GT/s x1 */
+				opp-16000000-4 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <1969000 1>;
+					opp-level = <4>;
+				};
+
+				/* 16 GT/s x2 */
+				opp-32000000-4 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <3938000 1>;
+					opp-level = <4>;
+				};
+
+				/* 16 GT/s x4 */
+				opp-64000000-4 {
+					opp-hz = /bits/ 64 <64000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <7876000 1>;
+					opp-level = <4>;
+				};
+
+				/* 16 GT/s x8 */
+				opp-128000000-4 {
+					opp-hz = /bits/ 64 <128000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <15753000 1>;
+					opp-level = <4>;
+				};
+			};
+
+			pcie3_port: pcie@0 {
+				device_type = "pci";
+				compatible = "pciclass,0604";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie3_phy: phy@1be0000 {
+			compatible = "qcom,x1e80100-qmp-gen4x8-pcie-phy";
+			reg = <0 0x01be0000 0 0x10000>;
+
+			clocks = <&gcc GCC_PCIE_3_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_8L_CLKREF_EN>,
+				 <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_3_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3_PIPEDIV2_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe",
+				      "pipediv2";
+
+			resets = <&gcc GCC_PCIE_3_PHY_BCR>,
+				 <&gcc GCC_PCIE_3_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			assigned-clocks = <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc GCC_PCIE_3_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie3_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pcie6a: pci@1bf8000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-x1e80100";
@@ -2924,7 +3461,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x1d00000>;
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>;
 			bus-range = <0x00 0xff>;
 
 			dma-coherent;
@@ -2941,7 +3478,8 @@
 				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -2949,14 +3487,15 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 843 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 844 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 845 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 772 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_6A_AUX_CLK>,
 				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
@@ -2978,8 +3517,8 @@
 
 			interconnects = <&pcie_south_anoc MASTER_PCIE_6A QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
@@ -2994,6 +3533,9 @@
 			phys = <&pcie6a_phy>;
 			phy-names = "pciephy";
 
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
+			eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
+
 			status = "disabled";
 		};
 
@@ -3068,7 +3610,8 @@
 				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -3076,14 +3619,15 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 71 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 72 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
 				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
@@ -3105,8 +3649,8 @@
 
 			interconnects = <&pcie_north_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
@@ -3121,6 +3665,8 @@
 			phys = <&pcie5_phy>;
 			phy-names = "pciephy";
 
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
+
 			status = "disabled";
 		};
 
@@ -3141,8 +3687,10 @@
 				      "pipe",
 				      "pipediv2";
 
-			resets = <&gcc GCC_PCIE_5_PHY_BCR>;
-			reset-names = "phy";
+			resets = <&gcc GCC_PCIE_5_PHY_BCR>,
+				 <&gcc GCC_PCIE_5_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
 
 			assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>;
 			assigned-clock-rates = <100000000>;
@@ -3192,7 +3740,8 @@
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -3200,14 +3749,15 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
 				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
@@ -3229,8 +3779,8 @@
 
 			interconnects = <&pcie_north_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
@@ -3245,6 +3795,8 @@
 			phys = <&pcie4_phy>;
 			phy-names = "pciephy";
 
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
+
 			status = "disabled";
 
 			pcie4_port0: pcie@0 {
@@ -3275,8 +3827,10 @@
 				      "pipe",
 				      "pipediv2";
 
-			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
-			reset-names = "phy";
+			resets = <&gcc GCC_PCIE_4_PHY_BCR>,
+				 <&gcc GCC_PCIE_4_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
 
 			assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>;
 			assigned-clock-rates = <100000000>;
@@ -3325,70 +3879,141 @@
 			qcom,gmu = <&gmu>;
 			#cooling-cells = <2>;
 
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "gfx-mem";
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&gpu_microcode_mem>;
 			};
 
 			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
+				compatible = "operating-points-v2-adreno", "operating-points-v2";
+
+				opp-1500000000 {
+					opp-hz = /bits/ 64 <1500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L5>;
+					opp-peak-kBps = <16500000>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x03>;
+				};
 
-				opp-1100000000 {
+				opp-1375000000 {
+					opp-hz = /bits/ 64 <1375000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
+					opp-peak-kBps = <16500000>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x03>;
+				};
+
+				opp-1250000000 {
+					opp-hz = /bits/ 64 <1250000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
+					opp-peak-kBps = <16500000>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-1175000000 {
+					opp-hz = /bits/ 64 <1175000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
+					opp-peak-kBps = <14398438>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-1100000000-0 {
+					opp-hz = /bits/ 64 <1100000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <14398438>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x07>;
+				};
+
+				/* Only applicable for SKUs which has 1100Mhz as Fmax */
+				opp-1100000000-1 {
 					opp-hz = /bits/ 64 <1100000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
 					opp-peak-kBps = <16500000>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x08>;
 				};
 
 				opp-1000000000 {
 					opp-hz = /bits/ 64 <1000000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
 					opp-peak-kBps = <14398438>;
+					qcom,opp-acd-level = <0xa82b5ffd>;
+					opp-supported-hw = <0x0f>;
 				};
 
 				opp-925000000 {
 					opp-hz = /bits/ 64 <925000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <14398438>;
+					qcom,opp-acd-level = <0xa82b5ffd>;
+					opp-supported-hw = <0x0f>;
 				};
 
 				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <12449219>;
+					qcom,opp-acd-level = <0xa82c5ffd>;
+					opp-supported-hw = <0x0f>;
 				};
 
 				opp-744000000 {
 					opp-hz = /bits/ 64 <744000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <10687500>;
+					qcom,opp-acd-level = <0x882e5ffd>;
+					opp-supported-hw = <0x0f>;
 				};
 
-				opp-687000000 {
+				opp-687000000-0 {
 					opp-hz = /bits/ 64 <687000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0x882e5ffd>;
+					opp-supported-hw = <0x0f>;
+				};
+
+				/* Only applicable for SKUs which has 687Mhz as Fmax */
+				opp-687000000-1 {
+					opp-hz = /bits/ 64 <687000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <16500000>;
+					qcom,opp-acd-level = <0x882e5ffd>;
+					opp-supported-hw = <0x10>;
 				};
 
 				opp-550000000 {
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <6074219>;
+					qcom,opp-acd-level = <0xc0285ffd>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-390000000 {
 					opp-hz = /bits/ 64 <390000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <3000000>;
+					qcom,opp-acd-level = <0xc0285ffd>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-300000000 {
 					opp-hz = /bits/ 64 <300000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
 					opp-peak-kBps = <2136719>;
+					qcom,opp-acd-level = <0xc02b5ffd>;
+					opp-supported-hw = <0x1f>;
 				};
 			};
 		};
@@ -3518,6 +4143,143 @@
 			#interconnect-cells = <2>;
 		};
 
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,x1e80100-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&adspslpi_mem>,
+					<&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1063 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1064 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1065 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1066 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x80>,
+							 <&apps_smmu 0x1067 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
 		lpass_wsa2macro: codec@6aa0000 {
 			compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
 			reg = <0 0x06aa0000 0 0x1000>;
@@ -3892,6 +4654,112 @@
 			#interconnect-cells = <2>;
 		};
 
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,x1e80100-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x520 0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			bus-width = <4>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		sdhc_4: mmc@8844000 {
+			compatible = "qcom,x1e80100-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08844000 0 0x1000>;
+
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC4_AHB_CLK>,
+				 <&gcc GCC_SDCC4_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x160 0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc4_opp_table>;
+
+			interconnects = <&aggre2_noc MASTER_SDCC_4 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_4 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			bus-width = <4>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc4_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
 		usb_2_hsphy: phy@88e0000 {
 			compatible = "qcom,x1e80100-snps-eusb2-phy",
 				     "qcom,sm8550-snps-eusb2-phy";
@@ -4034,8 +4902,8 @@
 
 			interconnects = <&usb_south_anoc MASTER_USB3_2 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
@@ -4063,11 +4931,11 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,usb3_lpm_capable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
 				dma-coherent;
 
-				usb-role-switch;
-
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -4120,7 +4988,7 @@
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 50 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 49 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
@@ -4134,11 +5002,12 @@
 
 			interconnects = <&usb_north_anoc MASTER_USB2 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
+			qcom,select-utmi-as-pipe-clk;
 			wakeup-source;
 
 			status = "disabled";
@@ -4146,21 +5015,18 @@
 			usb_2_dwc3: usb@a200000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a200000 0 0xcd00>;
-				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x14e0 0x0>;
 				phys = <&usb_2_hsphy>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
+				dma-coherent;
 
-						usb_2_dwc3_hs: endpoint {
-						};
+				port {
+					usb_2_dwc3_hs: endpoint {
 					};
 				};
 			};
@@ -4217,8 +5083,8 @@
 
 			interconnects = <&usb_north_anoc MASTER_USB3_MP QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
@@ -4247,6 +5113,8 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,usb3_lpm_capable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
 				dma-coherent;
 			};
@@ -4318,11 +5186,11 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,usb3_lpm_capable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
 				dma-coherent;
 
-				usb-role-switch;
-
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -4389,8 +5257,8 @@
 
 			interconnects = <&usb_south_anoc MASTER_USB3_1 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
@@ -4418,11 +5286,11 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,usb3_lpm_capable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
 				dma-coherent;
 
-				usb-role-switch;
-
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -4445,6 +5313,107 @@
 			};
 		};
 
+		iris: video-codec@aa00000 {
+			compatible = "qcom,x1e80100-iris", "qcom,sm8550-iris";
+
+			reg = <0 0x0aa00000 0 0xf0000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+			reset-names = "bus";
+
+			iommus = <&apps_smmu 0x1940 0>,
+				 <&apps_smmu 0x1947 0>;
+			dma-coherent;
+
+			/*
+			 * IRIS firmware is signed by vendors, only
+			 * enable on boards where the proper signed firmware
+			 * is available.
+			 */
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmhpd_opp_low_svs_d1>,
+							<&rpmhpd_opp_low_svs_d1>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-338000000 {
+					opp-hz = /bits/ 64 <338000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-481000000 {
+					opp-hz = /bits/ 64 <481000000>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,x1e80100-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_VIDEO_AHB_CLK>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,x1e80100-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -4576,7 +5545,7 @@
 				compatible = "qcom,x1e80100-dp";
 				reg = <0 0x0ae90000 0 0x200>,
 				      <0 0x0ae90200 0 0x200>,
-				      <0 0x0ae90400 0 0x600>,
+				      <0 0x0ae90400 0 0xc00>,
 				      <0 0x0ae91000 0 0x400>,
 				      <0 0x0ae91400 0 0x400>;
 
@@ -4586,16 +5555,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				operating-points-v2 = <&mdss_dp0_opp_table>;
@@ -4625,6 +5598,7 @@
 						reg = <1>;
 
 						mdss_dp0_out: endpoint {
+							data-lanes = <0 1 2 3>;
 							remote-endpoint = <&usb_1_ss0_qmpphy_dp_in>;
 						};
 					};
@@ -4659,7 +5633,7 @@
 				compatible = "qcom,x1e80100-dp";
 				reg = <0 0x0ae98000 0 0x200>,
 				      <0 0x0ae98200 0 0x200>,
-				      <0 0x0ae98400 0 0x600>,
+				      <0 0x0ae98400 0 0xc00>,
 				      <0 0x0ae99000 0 0x400>,
 				      <0 0x0ae99400 0 0x400>;
 
@@ -4669,16 +5643,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				operating-points-v2 = <&mdss_dp1_opp_table>;
@@ -4708,6 +5686,7 @@
 						reg = <1>;
 
 						mdss_dp1_out: endpoint {
+							data-lanes = <0 1 2 3>;
 							remote-endpoint = <&usb_1_ss1_qmpphy_dp_in>;
 						};
 					};
@@ -4742,7 +5721,7 @@
 				compatible = "qcom,x1e80100-dp";
 				reg = <0 0x0ae9a000 0 0x200>,
 				      <0 0x0ae9a200 0 0x200>,
-				      <0 0x0ae9a400 0 0x600>,
+				      <0 0x0ae9a400 0 0xc00>,
 				      <0 0x0ae9b000 0 0x400>,
 				      <0 0x0ae9b400 0 0x400>;
 
@@ -4752,16 +5731,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_ss2_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				operating-points-v2 = <&mdss_dp2_opp_table>;
@@ -4790,6 +5773,7 @@
 						reg = <1>;
 
 						mdss_dp2_out: endpoint {
+							data-lanes = <0 1 2 3>;
 							remote-endpoint = <&usb_1_ss2_qmpphy_dp_in>;
 						};
 					};
@@ -4824,7 +5808,7 @@
 				compatible = "qcom,x1e80100-dp";
 				reg = <0 0x0aea0000 0 0x200>,
 				      <0 0x0aea0200 0 0x200>,
-				      <0 0x0aea0400 0 0x600>,
+				      <0 0x0aea0400 0 0xc00>,
 				      <0 0x0aea1000 0 0x400>,
 				      <0 0x0aea1400 0 0x400>;
 
@@ -4871,6 +5855,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss_dp3_out: endpoint {
+						};
 					};
 				};
 
@@ -5053,6 +6040,12 @@
 			gpio-ranges = <&tlmm 0 0 239>;
 			wakeup-parent = <&pdc>;
 
+			edp0_hpd_default: edp0-hpd-default-state {
+				pins = "gpio119";
+				function = "edp0_hot";
+				bias-disable;
+			};
+
 			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
 				/* SDA, SCL */
 				pins = "gpio0", "gpio1";
@@ -5635,6 +6628,34 @@
 				};
 			};
 
+			qup_uart14_default: qup-uart14-default-state {
+				cts-pins {
+					pins = "gpio56";
+					function = "qup1_se6";
+					bias-bus-hold;
+				};
+
+				rts-pins {
+					pins = "gpio57";
+					function = "qup1_se6";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				tx-pins {
+					pins = "gpio58";
+					function = "qup1_se6";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio59";
+					function = "qup1_se6";
+					bias-pull-up;
+				};
+			};
+
 			qup_uart21_default: qup-uart21-default-state {
 				tx-pins {
 					pins = "gpio86";
@@ -5650,6 +6671,1487 @@
 					bias-disable;
 				};
 			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		stm@10002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x10002000 0x0 0x1000>,
+			      <0x0 0x16280000 0x0 0x180000>;
+			reg-names = "stm-base",
+				    "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@10003000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10003000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					dcc_tpdm_out: endpoint {
+						remote-endpoint = <&qdss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpda@10004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x10004000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					qdss_tpda_in0: endpoint {
+						remote-endpoint = <&dcc_tpdm_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					qdss_tpda_in1: endpoint {
+						remote-endpoint = <&qdss_tpdm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_tpda_out: endpoint {
+						remote-endpoint = <&funnel0_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@1000f000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x1000f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					qdss_tpdm_out: endpoint {
+						remote-endpoint = <&qdss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@10041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10041000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					funnel0_in6: endpoint {
+						remote-endpoint = <&qdss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&qdss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@10042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					reg = <2>;
+
+					funnel1_in2: endpoint {
+						remote-endpoint = <&tmess_funnel_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					funnel1_in5: endpoint {
+						remote-endpoint = <&dlst_funnel_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					funnel1_in6: endpoint {
+						remote-endpoint = <&dlct1_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&qdss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@10045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					qdss_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					qdss_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_funnel_out: endpoint {
+						remote-endpoint = <&aoss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@10800000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10800000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					mxa_tpdm_out: endpoint {
+						remote-endpoint = <&dlct2_tpda_in15>;
+					};
+				};
+			};
+		};
+
+		tpdm@1082c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x1082c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					gcc_tpdm_out: endpoint {
+						remote-endpoint = <&dlct1_tpda_in21>;
+					};
+				};
+			};
+		};
+
+		tpdm@10841000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10841000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					prng_tpdm_out: endpoint {
+						remote-endpoint = <&dlct1_tpda_in19>;
+					};
+				};
+			};
+		};
+
+		tpdm@10844000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10844000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					lpass_cx_tpdm_out: endpoint {
+						remote-endpoint = <&lpass_cx_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@10846000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10846000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					lpass_cx_funnel_in0: endpoint {
+						remote-endpoint = <&lpass_cx_tpdm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					lpass_cx_funnel_out: endpoint {
+						remote-endpoint = <&dlct1_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		cti@1098b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x1098b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@109d0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x109d0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					qm_tpdm_out: endpoint {
+						remote-endpoint = <&dlct1_tpda_in20>;
+					};
+				};
+			};
+		};
+
+		tpdm@10ac0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10ac0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					dlst_tpdm0_out: endpoint {
+						remote-endpoint = <&dlst_tpda_in8>;
+					};
+				};
+			};
+		};
+
+		tpdm@10ac1000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10ac1000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlst_tpdm1_out: endpoint {
+						remote-endpoint = <&dlst_tpda_in9>;
+					};
+				};
+			};
+		};
+
+		tpda@10ac4000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x10ac4000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+
+					dlst_tpda_in8: endpoint {
+						remote-endpoint = <&dlst_tpdm0_out>;
+					};
+				};
+
+				port@9 {
+					reg = <9>;
+
+					dlst_tpda_in9: endpoint {
+						remote-endpoint = <&dlst_tpdm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_tpda_out: endpoint {
+						remote-endpoint = <&dlst_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@10ac5000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10ac5000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					dlst_funnel_in0: endpoint {
+						remote-endpoint = <&dlst_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in5>;
+					};
+				};
+			};
+		};
+
+		funnel@10b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@3 {
+					reg = <3>;
+
+					aoss_funnel_in3: endpoint {
+						remote-endpoint = <&ddr_lpi_funnel_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					aoss_funnel_in6: endpoint {
+						remote-endpoint = <&aoss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					aoss_funnel_in7: endpoint {
+						remote-endpoint = <&qdss_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					aoss_funnel_out: endpoint {
+						remote-endpoint = <&etf0_in>;
+					};
+				};
+			};
+		};
+
+		etf0: tmc@10b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x10b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf0_in: endpoint {
+						remote-endpoint = <&aoss_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf0_out: endpoint {
+						remote-endpoint = <&swao_rep_in>;
+					};
+				};
+			};
+		};
+
+		replicator@10b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x10b06000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					swao_rep_in: endpoint {
+						remote-endpoint = <&etf0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					swao_rep_out1: endpoint {
+						remote-endpoint = <&eud_in>;
+					};
+				};
+			};
+		};
+
+		tpda@10b08000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x10b08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					aoss_tpda_in0: endpoint {
+						remote-endpoint = <&aoss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					aoss_tpda_in1: endpoint {
+						remote-endpoint = <&aoss_tpdm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					aoss_tpda_in2: endpoint {
+						remote-endpoint = <&aoss_tpdm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					aoss_tpda_in3: endpoint {
+						remote-endpoint = <&aoss_tpdm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					aoss_tpda_in4: endpoint {
+						remote-endpoint = <&aoss_tpdm4_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					aoss_tpda_out: endpoint {
+						remote-endpoint = <&aoss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@10b09000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10b09000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm0_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@10b0a000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10b0a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm1_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@10b0b000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10b0b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm2_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		tpdm@10b0c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10b0c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm3_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@10b0d000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10b0d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm4_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@10b20000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10b20000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					lpicc_tpdm_out: endpoint {
+						remote-endpoint = <&ddr_lpi_tpda_in>;
+					};
+				};
+			};
+		};
+
+		tpda@10b23000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x10b23000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					ddr_lpi_tpda_in: endpoint {
+						remote-endpoint = <&lpicc_tpdm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_lpi_tpda_out: endpoint {
+						remote-endpoint = <&ddr_lpi_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@10b24000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10b24000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					ddr_lpi_funnel_in0: endpoint {
+						remote-endpoint = <&ddr_lpi_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_lpi_funnel_out: endpoint {
+						remote-endpoint = <&aoss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@10c08000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10c08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					mm_tpdm_out: endpoint {
+						remote-endpoint = <&mm_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		funnel@10c0b000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10c0b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+
+					mm_funnel_in4: endpoint {
+						remote-endpoint = <&mm_tpdm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					mm_funnel_out: endpoint {
+						remote-endpoint = <&dlct2_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@10c28000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10c28000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlct1_tpdm_out: endpoint {
+						remote-endpoint = <&dlct1_tpda_in26>;
+					};
+				};
+			};
+		};
+
+		tpdm@10c29000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10c29000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					ipcc_tpdm_out: endpoint {
+						remote-endpoint = <&dlct1_tpda_in27>;
+					};
+				};
+			};
+		};
+
+		tpda@10c2b000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x10c2b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+
+					dlct1_tpda_in4: endpoint {
+						remote-endpoint = <&lpass_cx_funnel_out>;
+					};
+				};
+
+				port@13 {
+					reg = <19>;
+
+					dlct1_tpda_in19: endpoint {
+						remote-endpoint = <&prng_tpdm_out>;
+					};
+				};
+
+				port@14 {
+					reg = <20>;
+
+					dlct1_tpda_in20: endpoint {
+						remote-endpoint = <&qm_tpdm_out>;
+					};
+				};
+
+				port@15 {
+					reg = <21>;
+
+					dlct1_tpda_in21: endpoint {
+						remote-endpoint = <&gcc_tpdm_out>;
+					};
+				};
+
+				port@1a {
+					reg = <26>;
+
+					dlct1_tpda_in26: endpoint {
+						remote-endpoint = <&dlct1_tpdm_out>;
+					};
+				};
+
+				port@1b {
+					reg = <27>;
+
+					dlct1_tpda_in27: endpoint {
+						remote-endpoint = <&ipcc_tpdm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlct1_tpda_out: endpoint {
+						remote-endpoint = <&dlct1_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@10c2c000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10c2c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					dlct1_funnel_in0: endpoint {
+						remote-endpoint = <&dlct1_tpda_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					dlct1_funnel_in4: endpoint {
+						remote-endpoint = <&dlct2_funnel_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					dlct1_funnel_in5: endpoint {
+						remote-endpoint = <&ddr_funnel0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlct1_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@10c38000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10c38000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlct2_tpdm0_out: endpoint {
+						remote-endpoint = <&dlct2_tpda_in16>;
+					};
+				};
+			};
+		};
+
+		tpdm@10c39000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10c39000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlct2_tpdm1_out: endpoint {
+						remote-endpoint = <&dlct2_tpda_in17>;
+					};
+				};
+			};
+		};
+
+		tpda@10c3c000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x10c3c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+
+					dlct2_tpda_in4: endpoint {
+						remote-endpoint = <&mm_funnel_out>;
+					};
+				};
+
+				port@f {
+					reg = <15>;
+
+					dlct2_tpda_in15: endpoint {
+						remote-endpoint = <&mxa_tpdm_out>;
+					};
+				};
+
+				port@10 {
+					reg = <16>;
+
+					dlct2_tpda_in16: endpoint {
+						remote-endpoint = <&dlct2_tpdm0_out>;
+					};
+				};
+
+				port@11 {
+					reg = <17>;
+
+					dlct2_tpda_in17: endpoint {
+						remote-endpoint = <&dlct2_tpdm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlct2_tpda_out: endpoint {
+						remote-endpoint = <&dlct2_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@10c3d000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10c3d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					dlct2_funnel_in0: endpoint {
+						remote-endpoint = <&dlct2_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlct2_funnel_out: endpoint {
+						remote-endpoint = <&dlct1_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@10cc1000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10cc1000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tmess_tpdm1_out: endpoint {
+						remote-endpoint = <&tmess_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		tpda@10cc4000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x10cc4000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					reg = <2>;
+
+					tmess_tpda_in2: endpoint {
+						remote-endpoint = <&tmess_tpdm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tmess_tpda_out: endpoint {
+						remote-endpoint = <&tmess_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@10cc5000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10cc5000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmess_funnel_in0: endpoint {
+						remote-endpoint = <&tmess_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tmess_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in2>;
+					};
+				};
+			};
+		};
+
+		funnel@10d04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10d04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					ddr_funnel0_in6: endpoint {
+						remote-endpoint = <&ddr_funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_funnel0_out: endpoint {
+						remote-endpoint = <&dlct1_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		tpdm@10d08000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10d08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					llcc0_tpdm_out: endpoint {
+						remote-endpoint = <&llcc_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@10d09000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10d09000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					llcc1_tpdm_out: endpoint {
+						remote-endpoint = <&llcc_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@10d0a000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10d0a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					llcc2_tpdm_out: endpoint {
+						remote-endpoint = <&llcc_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		tpdm@10d0b000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10d0b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					llcc3_tpdm_out: endpoint {
+						remote-endpoint = <&llcc_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@10d0c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10d0c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					llcc4_tpdm_out: endpoint {
+						remote-endpoint = <&llcc_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@10d0d000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10d0d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					llcc5_tpdm_out: endpoint {
+						remote-endpoint = <&llcc_tpda_in5>;
+					};
+				};
+			};
+		};
+
+		tpdm@10d0e000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10d0e000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					llcc6_tpdm_out: endpoint {
+						remote-endpoint = <&llcc_tpda_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@10d0f000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10d0f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					llcc7_tpdm_out: endpoint {
+						remote-endpoint = <&llcc_tpda_in7>;
+					};
+				};
+			};
+		};
+
+		tpda@10d12000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x10d12000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					llcc_tpda_in0: endpoint {
+						remote-endpoint = <&llcc0_tpdm_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					llcc_tpda_in1: endpoint {
+						remote-endpoint = <&llcc1_tpdm_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					llcc_tpda_in2: endpoint {
+						remote-endpoint = <&llcc2_tpdm_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					llcc_tpda_in3: endpoint {
+						remote-endpoint = <&llcc3_tpdm_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					llcc_tpda_in4: endpoint {
+						remote-endpoint = <&llcc4_tpdm_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					llcc_tpda_in5: endpoint {
+						remote-endpoint = <&llcc5_tpdm_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					llcc_tpda_in6: endpoint {
+						remote-endpoint = <&llcc6_tpdm_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					llcc_tpda_in7: endpoint {
+						remote-endpoint = <&llcc7_tpdm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					llcc_tpda_out: endpoint {
+						remote-endpoint = <&ddr_funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@10d13000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10d13000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					ddr_funnel1_in0: endpoint {
+						remote-endpoint = <&llcc_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_funnel1_out: endpoint {
+						remote-endpoint = <&ddr_funnel0_in6>;
+					};
+				};
+			};
 		};
 
 		apps_smmu: iommu@15000000 {
@@ -5760,6 +8262,20 @@
 			dma-coherent;
 		};
 
+		pcie_smmu: iommu@15400000 {
+			compatible = "arm,smmu-v3";
+			reg = <0 0x15400000 0 0x80000>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq",
+					  "gerror",
+					  "cmdq-sync";
+			dma-coherent;
+			status = "reserved"; /* Controlled by Gunyah. */
+		};
+
 		intc: interrupt-controller@17000000 {
 			compatible = "arm,gic-v3";
 			reg = <0 0x17000000 0 0x10000>,     /* GICD */
@@ -5786,6 +8302,13 @@
 			};
 		};
 
+		cpucp_mbox: mailbox@17430000 {
+			compatible = "qcom,x1e80100-cpucp-mbox";
+			reg = <0 0x17430000 0 0x10000>, <0 0x18830000 0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
 		apps_rsc: rsc@17500000 {
 			compatible = "qcom,rpmh-rsc";
 			reg = <0 0x17500000 0 0x10000>,
@@ -5969,6 +8492,44 @@
 			};
 		};
 
+		sram: sram@18b4e000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x18b4e000 0x0 0x400>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x18b4e000 0x400>;
+
+			cpu_scp_lpri0: scp-sram-section@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x0 0x200>;
+			};
+
+			cpu_scp_lpri1: scp-sram-section@200 {
+				compatible = "arm,scmi-shmem";
+				reg = <0x200 0x200>;
+			};
+		};
+
+		sbsa_watchdog: watchdog@1c840000 {
+			compatible = "arm,sbsa-gwdt";
+			reg = <0 0x1c840000 0 0x1000>,
+			      <0 0x1c850000 0 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qfprom: efuse@221c8000 {
+			compatible = "qcom,x1e80100-qfprom", "qcom,qfprom";
+			reg = <0 0x221c8000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu-speed-bin@119 {
+				reg = <0x119 0x2>;
+				bits = <7 8>;
+			};
+		};
+
 		pmu@24091000 {
 			compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
 			reg = <0 0x24091000 0 0x1000>;
@@ -6026,7 +8587,7 @@
 		};
 
 		/* cluster0 */
-		pmu@240b3400 {
+		bwmon_cluster0: pmu@240b3400 {
 			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x240b3400 0 0x600>;
 
@@ -6036,6 +8597,19 @@
 					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
+		/* cluster2 */
+		bwmon_cluster2: pmu@240b5400 {
+			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b5400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
 
 			cpu_bwmon_opp_table: opp-table {
 				compatible = "operating-points-v2";
@@ -6066,19 +8640,6 @@
 			};
 		};
 
-		/* cluster2 */
-		pmu@240b5400 {
-			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
-			reg = <0 0x240b5400 0 0x600>;
-
-			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
-
-			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
-					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
-
-			operating-points-v2 = <&cpu_bwmon_opp_table>;
-		};
-
 		/* cluster1 */
 		pmu@240b6400 {
 			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
@@ -6117,146 +8678,9 @@
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,x1e80100-adsp-pas";
-			reg = <0 0x30000000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog",
-					  "fatal",
-					  "ready",
-					  "handover",
-					  "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx",
-					     "lmx";
-
-			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-
-			memory-region = <&adspslpi_mem>,
-					<&q6_adsp_dtb_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1003 0x80>,
-							 <&apps_smmu 0x1063 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1004 0x80>,
-							 <&apps_smmu 0x1064 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1005 0x80>,
-							 <&apps_smmu 0x1065 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x1006 0x80>,
-							 <&apps_smmu 0x1066 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x1007 0x80>,
-							 <&apps_smmu 0x1067 0x0>;
-						dma-coherent;
-					};
-				};
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1001 0x80>,
-								 <&apps_smmu 0x1061 0x0>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-			};
-		};
-
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,x1e80100-cdsp-pas";
-			reg = <0 0x32300000 0 0x1400000>;
+			reg = <0x0 0x32300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -6409,7 +8833,7 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
-	thermal-zones {
+	thermal_zones: thermal-zones {
 		aoss0-thermal {
 			thermal-sensors = <&tsens0 0>;
 
@@ -6421,33 +8845,19 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		cpu0-0-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6455,25 +8865,11 @@
 		};
 
 		cpu0-0-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6481,25 +8877,11 @@
 		};
 
 		cpu0-1-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6507,25 +8889,11 @@
 		};
 
 		cpu0-1-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6533,25 +8901,11 @@
 		};
 
 		cpu0-2-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6559,25 +8913,11 @@
 		};
 
 		cpu0-2-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6585,25 +8925,11 @@
 		};
 
 		cpu0-3-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6611,25 +8937,11 @@
 		};
 
 		cpu0-3-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6640,15 +8952,9 @@
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6658,15 +8964,9 @@
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6683,7 +8983,7 @@
 				};
 
 				mem-critical {
-					temperature = <125000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6691,15 +8991,19 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
 				trip-point0 {
-					temperature = <125000>;
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "critical";
 				};
 			};
 		};
@@ -6715,33 +9019,19 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		cpu1-0-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6749,25 +9039,11 @@
 		};
 
 		cpu1-0-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6775,25 +9051,11 @@
 		};
 
 		cpu1-1-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6801,25 +9063,11 @@
 		};
 
 		cpu1-1-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6827,25 +9075,11 @@
 		};
 
 		cpu1-2-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6853,25 +9087,11 @@
 		};
 
 		cpu1-2-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6879,25 +9099,11 @@
 		};
 
 		cpu1-3-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6905,25 +9111,11 @@
 		};
 
 		cpu1-3-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -6934,15 +9126,9 @@
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6952,15 +9138,9 @@
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6977,33 +9157,19 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		cpu2-0-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 1>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7011,25 +9177,11 @@
 		};
 
 		cpu2-0-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 2>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7037,25 +9189,11 @@
 		};
 
 		cpu2-1-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 3>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7063,25 +9201,11 @@
 		};
 
 		cpu2-1-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 4>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7089,25 +9213,11 @@
 		};
 
 		cpu2-2-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 5>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7115,25 +9225,11 @@
 		};
 
 		cpu2-2-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7141,25 +9237,11 @@
 		};
 
 		cpu2-3-top-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7167,25 +9249,11 @@
 		};
 
 		cpu2-3-btm-thermal {
-			polling-delay-passive = <250>;
-
 			thermal-sensors = <&tsens2 8>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7196,15 +9264,9 @@
 			thermal-sensors = <&tsens2 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7214,15 +9276,9 @@
 			thermal-sensors = <&tsens2 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-
 				cpuss2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7239,8 +9295,8 @@
 				};
 
 				aoss0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7257,8 +9313,8 @@
 				};
 
 				nsp0-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7275,8 +9331,8 @@
 				};
 
 				nsp1-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7293,8 +9349,8 @@
 				};
 
 				nsp2-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7311,33 +9367,34 @@
 				};
 
 				nsp3-critical {
-					temperature = <125000>;
-					hysteresis = <0>;
+					temperature = <115000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		gpuss-0-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 5>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7345,25 +9402,26 @@
 		};
 
 		gpuss-1-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 6>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7371,25 +9429,26 @@
 		};
 
 		gpuss-2-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 7>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss2_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7397,25 +9456,26 @@
 		};
 
 		gpuss-3-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 8>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss3_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss3_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7423,25 +9483,26 @@
 		};
 
 		gpuss-4-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 9>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss4_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss4_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7449,25 +9510,26 @@
 		};
 
 		gpuss-5-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 10>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss5_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss5_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7475,25 +9537,26 @@
 		};
 
 		gpuss-6-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 11>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss6_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss6_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7501,25 +9564,26 @@
 		};
 
 		gpuss-7-thermal {
-			polling-delay-passive = <10>;
+			polling-delay-passive = <200>;
 
 			thermal-sensors = <&tsens3 12>;
 
-			trips {
-				trip-point0 {
-					temperature = <85000>;
-					hysteresis = <1000>;
-					type = "passive";
+			cooling-maps {
+				map0 {
+					trip = <&gpuss7_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+			};
 
-				trip-point1 {
-					temperature = <90000>;
+			trips {
+				gpuss7_alert0: trip-point0 {
+					temperature = <95000>;
 					hysteresis = <1000>;
-					type = "hot";
+					type = "passive";
 				};
 
-				trip-point2 {
-					temperature = <125000>;
+				gpu-critical {
+					temperature = <115000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
@@ -7538,7 +9602,7 @@
 
 				camera0-critical {
 					temperature = <115000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -7556,7 +9620,7 @@
 
 				camera0-critical {
 					temperature = <115000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index 8460b538eb6a..df3cbb7c79c4 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -9,6 +9,8 @@
 
 #include "ipq5018.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Qualcomm Technologies, Inc. IPQ5018/AP-RDP432.1-C2";
 	compatible = "qcom,ipq5018-rdp432-c2", "qcom,ipq5018";
@@ -28,6 +30,20 @@
 	status = "okay";
 };
 
+&pcie0 {
+	pinctrl-0 = <&pcie0_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 16 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
 &sdhc_1 {
 	pinctrl-0 = <&sdc_default_state>;
 	pinctrl-names = "default";
@@ -43,6 +59,30 @@
 };
 
 &tlmm {
+	pcie0_default: pcie0-default-state {
+		clkreq-n-pins {
+			pins = "gpio14";
+			function = "pcie0_clk";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio15";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio16";
+			function = "pcie0_wake";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
 	sdc_default_state: sdc-default-state {
 		clk-pins {
 			pins = "gpio9";
@@ -80,5 +120,6 @@
 };
 
 &xo_board_clk {
-	clock-frequency = <24000000>;
+	clock-div = <4>;
+	clock-mult = <1>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
index 5bb021cb29cd..7a25af57749c 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
@@ -124,5 +124,6 @@
 };
 
 &xo_board_clk {
-	clock-frequency = <24000000>;
+	clock-div = <4>;
+	clock-mult = <1>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 8914f2ef0bc4..f024b3cba33f 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -2,13 +2,15 @@
 /*
  * IPQ5018 SoC device tree source
  *
- * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023-2025 The Linux Foundation. All rights reserved.
  */
 
 #include <dt-bindings/clock/qcom,apss-ipq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+#include <dt-bindings/clock/qcom,ipq5018-cmn-pll.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -16,14 +18,41 @@
 	#size-cells = <2>;
 
 	clocks {
+		gephy_rx_clk: gephy-rx-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			#clock-cells = <0>;
+		};
+
+		gephy_tx_clk: gephy-tx-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			#clock-cells = <0>;
+		};
+
+		ref_96mhz_clk: ref-96mhz-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&xo_clk>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+		};
+
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
 
 		xo_board_clk: xo-board-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&ref_96mhz_clk>;
+			#clock-cells = <0>;
+		};
+
+		xo_clk: xo-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-frequency = <48000000>;
 		};
 	};
 
@@ -39,6 +68,7 @@
 			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -49,6 +79,7 @@
 			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		l2_0: l2-cache {
@@ -79,6 +110,7 @@
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq5018", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
 			qcom,sdi-enabled;
 		};
 	};
@@ -147,6 +179,235 @@
 			status = "disabled";
 		};
 
+		pcie1_phy: phy@7e000 {
+			compatible = "qcom,ipq5018-uniphy-pcie-phy";
+			reg = <0x0007e000 0x800>;
+
+			clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			num-lanes = <1>;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@86000 {
+			compatible = "qcom,ipq5018-uniphy-pcie-phy";
+			reg = <0x00086000 0x1000>;
+
+			clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
+		mdio0: mdio@88000 {
+			compatible = "qcom,ipq5018-mdio";
+			reg = <0x00088000 0x64>,
+			      <0x019475c4 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO0_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+
+			ge_phy: ethernet-phy@7 {
+				compatible = "ethernet-phy-id004d.d0c0";
+				reg = <7>;
+
+				resets = <&gcc GCC_GEPHY_MISC_ARES>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			compatible = "qcom,ipq5018-mdio";
+			reg = <0x00090000 0x64>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO1_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+		};
+
+		cmn_pll: clock-controller@9b000 {
+			compatible = "qcom,ipq5018-cmn-pll";
+			reg = <0x0009b000 0x800>;
+			clocks = <&ref_96mhz_clk>,
+				 <&gcc GCC_CMN_BLK_AHB_CLK>,
+				 <&gcc GCC_CMN_BLK_SYS_CLK>;
+			clock-names = "ref",
+				      "ahb",
+				      "sys";
+			#clock-cells = <1>;
+			assigned-clocks = <&cmn_pll IPQ5018_CMN_PLL_CLK>;
+			assigned-clock-rates-u64 = /bits/ 64 <9600000000>;
+		};
+
+		qfprom: qfprom@a0000 {
+			compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
+			reg = <0x000a0000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_mode: mode@249 {
+				reg = <0x249 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base1: base1@249 {
+				reg = <0x249 0x2>;
+				bits = <3 8>;
+			};
+
+			tsens_base2: base2@24a {
+				reg = <0x24a 0x2>;
+				bits = <3 8>;
+			};
+
+			tsens_s0_p1: s0-p1@24b {
+				reg = <0x24b 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s0_p2: s0-p2@24c {
+				reg = <0x24c 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@24c {
+				reg = <0x24c 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@24d {
+				reg = <0x24d 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@24e {
+				reg = <0x24e 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@24f {
+				reg = <0x24f 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@24f {
+				reg = <0x24f 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@250 {
+				reg = <0x250 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@251 {
+				reg = <0x251 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@254 {
+				reg = <0x254 0x1>;
+				bits = <0 6>;
+			};
+		};
+
+		prng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>,
+				      <&tsens_base2>,
+				      <&tsens_s0_p1>,
+				      <&tsens_s0_p2>,
+				      <&tsens_s1_p1>,
+				      <&tsens_s1_p2>,
+				      <&tsens_s2_p1>,
+				      <&tsens_s2_p2>,
+				      <&tsens_s3_p1>,
+				      <&tsens_s3_p2>,
+				      <&tsens_s4_p1>,
+				      <&tsens_s4_p2>;
+
+			nvmem-cell-names = "mode",
+					   "base1",
+					   "base2",
+					   "s0_p1",
+					   "s0_p2",
+					   "s1_p1",
+					   "s1_p2",
+					   "s2_p1",
+					   "s2_p2",
+					   "s3_p1",
+					   "s3_p2",
+					   "s4_p1",
+					   "s4_p2";
+
+			interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "uplow";
+			#qcom,sensors = <5>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x0073a000 0x6000>;
+
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			dmas = <&cryptobam 2>,
+			       <&cryptobam 3>;
+			dma-names = "rx",
+				    "tx";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -170,11 +431,11 @@
 			reg = <0x01800000 0x80000>;
 			clocks = <&xo_board_clk>,
 				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&gephy_rx_clk>,
+				 <&gephy_tx_clk>,
 				 <0>,
 				 <0>;
 			#clock-cells = <1>;
@@ -187,6 +448,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq5018", "syscon";
+			reg = <0x01937000 0x21000>;
+		};
+
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x7804000 0x1000>;
@@ -224,6 +490,16 @@
 			status = "disabled";
 		};
 
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -238,6 +514,59 @@
 			status = "disabled";
 		};
 
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x07984000 0x1c000>;
+
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			status = "disabled";
+		};
+
+		qpic_nand: spi@79b0000 {
+			compatible = "qcom,ipq5018-snand", "qcom,ipq9574-snand";
+			reg = <0x079b0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>,
+				 <&gcc GCC_QPIC_IO_MACRO_CLK>;
+			clock-names = "core",
+				      "aon",
+				      "iom";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx",
+				    "rx",
+				    "cmd";
+
+			status = "disabled";
+		};
+
 		usb: usb@8af8800 {
 			compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
 			reg = <0x08af8800 0x400>;
@@ -387,6 +716,272 @@
 				status = "disabled";
 			};
 		};
+
+		pcie1: pcie@80000000 {
+			compatible = "qcom,pcie-ipq5018";
+			reg = <0x80000000 0xf1d>,
+			      <0x80000f20 0xa8>,
+			      <0x80001000 0x1000>,
+			      <0x00078000 0x3000>,
+			      <0x80100000 0x1000>,
+			      <0x0007b000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			/* The controller supports Gen3, but the connected PHY is Gen2-capable */
+			max-link-speed = <2>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			ranges = <0x01000000 0 0x00000000 0x80200000 0 0x00100000>,
+				 <0x02000000 0 0x80300000 0x80300000 0 0x10000000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xff8>;
+
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
+				 <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "aux",
+				      "axi_bridge";
+
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_SLEEP_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>,
+				 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0: pcie@a0000000 {
+			compatible = "qcom,pcie-ipq5018";
+			reg = <0xa0000000 0xf1d>,
+			      <0xa0000f20 0xa8>,
+			      <0xa0001000 0x1000>,
+			      <0x00080000 0x3000>,
+			      <0xa0100000 0x1000>,
+			      <0x00083000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			/* The controller supports Gen3, but the connected PHY is Gen2-capable */
+			max-link-speed = <2>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			ranges = <0x01000000 0 0x00000000 0xa0200000 0 0x00100000>,
+				 <0x02000000 0 0xa0300000 0xa0300000 0 0x10000000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xff8>;
+
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+				 <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "aux",
+				      "axi_bridge";
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_SLEEP_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_alert: cpu-passive {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gephy-thermal {
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				gephy-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				top-glue-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi32-thermal {
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				ubi32-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
index 846413817e9a..79ec77cfe552 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
@@ -32,6 +32,34 @@
 	status = "okay";
 };
 
+&pcie0 {
+	pinctrl-0 = <&pcie0_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
 &tlmm {
 	i2c_1_pins: i2c-1-state {
 		pins = "gpio29", "gpio30";
@@ -40,6 +68,54 @@
 		bias-pull-up;
 	};
 
+	pcie0_default: pcie0-default-state {
+		clkreq-n-pins {
+			pins = "gpio37";
+			function = "pcie0_clk";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio39";
+			function = "pcie0_wake";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default: pcie1-default-state {
+		clkreq-n-pins {
+			pins = "gpio46";
+			function = "pcie1_clk";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio47";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio48";
+			function = "pcie1_wake";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
 	sdc_default_state: sdc-default-state {
 		clk-pins {
 			pins = "gpio13";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index d3c3e215a15c..45fc512a3bab 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -177,15 +177,121 @@
 				reg = <0x1d 0x2>;
 				bits = <7 2>;
 			};
+
+			tsens_sens11_off: s11@3a5 {
+				reg = <0x3a5 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens12_off: s12@3a6 {
+				reg = <0x3a6 0x1>;
+				bits = <0 4>;
+			};
+
+			tsens_sens13_off: s13@3a6 {
+				reg = <0x3a6 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens14_off: s14@3ad {
+				reg = <0x3ad 0x2>;
+				bits = <7 4>;
+			};
+
+			tsens_sens15_off: s15@3ae {
+				reg = <0x3ae 0x1>;
+				bits = <3 4>;
+			};
+
+			tsens_mode: mode@3e1 {
+				reg = <0x3e1 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base0: base0@3e1 {
+				reg = <0x3e1 0x2>;
+				bits = <3 10>;
+			};
+
+			tsens_base1: base1@3e2 {
+				reg = <0x3e2 0x2>;
+				bits = <5 10>;
+			};
 		};
 
 		rng: rng@e3000 {
-			compatible = "qcom,prng-ee";
+			compatible = "qcom,ipq5332-trng", "qcom,trng";
 			reg = <0x000e3000 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5332-tsens";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base0>,
+				      <&tsens_base1>,
+				      <&tsens_sens11_off>,
+				      <&tsens_sens12_off>,
+				      <&tsens_sens13_off>,
+				      <&tsens_sens14_off>,
+				      <&tsens_sens15_off>;
+			nvmem-cell-names = "mode",
+					   "base0",
+					   "base1",
+					   "tsens_sens11_off",
+					   "tsens_sens12_off",
+					   "tsens_sens13_off",
+					   "tsens_sens14_off",
+					   "tsens_sens15_off";
+			#qcom,sensors = <5>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		pcie0_phy: phy@4b0000 {
+			compatible = "qcom,ipq5332-uniphy-pcie-phy";
+			reg = <0x004b0000 0x800>;
+
+			clocks = <&gcc GCC_PCIE3X1_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE3X1_PHY_AHB_CLK>;
+
+			resets = <&gcc GCC_PCIE3X1_0_PHY_BCR>,
+				 <&gcc GCC_PCIE3X1_PHY_AHB_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			num-lanes = <1>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@4b1000 {
+			compatible = "qcom,ipq5332-uniphy-pcie-phy";
+			reg = <0x004b1000 0x1000>;
+
+			clocks = <&gcc GCC_PCIE3X2_PIPE_CLK>,
+				 <&gcc GCC_PCIE3X2_PHY_AHB_CLK>;
+
+			resets = <&gcc GCC_PCIE3X2_PHY_BCR>,
+				 <&gcc GCC_PCIE3X2_PHY_AHB_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2PHY_PHY_BCR>;
+
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5332-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -212,8 +318,8 @@
 			#interconnect-cells = <1>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
-				 <0>,
-				 <0>,
+				 <&pcie1_phy>,
+				 <&pcie0_phy>,
 				 <0>;
 		};
 
@@ -479,6 +585,283 @@
 				status = "disabled";
 			};
 		};
+
+		pcie1: pcie@18000000 {
+			compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574";
+			reg = <0x18000000 0xf1c>,
+			      <0x18000f20 0xa8>,
+			      <0x18001000 0x1000>,
+			      <0x00088000 0x3000>,
+			      <0x18100000 0x1000>,
+			      <0x0008b000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x18300000 0x18300000 0x0 0x07d00000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xffd>;
+
+			interrupts = <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3X2_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3X2_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3X2_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3X2_RCHG_CLK>,
+				 <&gcc GCC_PCIE3X2_AHB_CLK>,
+				 <&gcc GCC_PCIE3X2_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE3X2_AUX_CLK>;
+
+			assigned-clock-rates = <2000000>;
+
+			resets = <&gcc GCC_PCIE3X2_PIPE_ARES>,
+				 <&gcc GCC_PCIE3X2_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_S_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X2_AXI_M_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2_AUX_CLK_ARES>,
+				 <&gcc GCC_PCIE3X2_AHB_CLK_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			interconnects = <&gcc MASTER_SNOC_PCIE3_2_M &gcc SLAVE_SNOC_PCIE3_2_M>,
+					<&gcc MASTER_ANOC_PCIE3_2_S &gcc SLAVE_ANOC_PCIE3_2_S>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0: pcie@20000000 {
+			compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574";
+			reg = <0x20000000 0xf1c>,
+			      <0x20000f20 0xa8>,
+			      <0x20001000 0x1000>,
+			      <0x00080000 0x3000>,
+			      <0x20100000 0x1000>,
+			      <0x00083000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x20300000 0x20300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &v2m0 0x0 0xffd>;
+
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3X1_0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3X1_0_RCHG_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AHB_CLK>,
+				 <&gcc GCC_PCIE3X1_0_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE3X1_0_AUX_CLK>;
+
+			assigned-clock-rates = <2000000>;
+
+			resets = <&gcc GCC_PCIE3X1_0_PIPE_ARES>,
+				 <&gcc GCC_PCIE3X1_0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_S_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AXI_M_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AUX_CLK_ARES>,
+				 <&gcc GCC_PCIE3X1_0_AHB_CLK_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			interconnects = <&gcc MASTER_SNOC_PCIE3_1_M &gcc SLAVE_SNOC_PCIE3_1_M>,
+					<&gcc MASTER_ANOC_PCIE3_1_S &gcc SLAVE_ANOC_PCIE3_1_S>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+	};
+
+	thermal-zones {
+		rfa-0-thermal {
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				rfa-0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		rfa-1-thermal {
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				rfa-1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		misc-thermal {
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				misc-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-top-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				cpu-top-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top-glue-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
new file mode 100644
index 000000000000..738618551203
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5424 RDP466 board device tree source
+ *
+ * Copyright (c) 2024-2025 The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq5424.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5424 RDP466";
+	compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	vreg_misc_3p3: regulator-usb-3p3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "usb_hs_vdda_3p3";
+	};
+
+	vreg_misc_1p8: regulator-usb-1p8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "vdda_1p8_usb";
+	};
+
+	vreg_misc_0p925: regulator-usb-0p925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "vdd_core_usb";
+	};
+};
+
+&dwc_0 {
+	dr_mode = "host";
+};
+
+&dwc_1 {
+	dr_mode = "host";
+};
+
+&pcie2 {
+	pinctrl-0 = <&pcie2_default_state>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie2_phy {
+	status = "okay";
+};
+
+&pcie3 {
+	pinctrl-0 = <&pcie3_default_state>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	status = "okay";
+};
+
+&qusb_phy_0 {
+	vdd-supply = <&vreg_misc_0p925>;
+	vdda-pll-supply = <&vreg_misc_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
+
+	status = "okay";
+};
+
+&qusb_phy_1 {
+	vdd-supply = <&vreg_misc_0p925>;
+	vdda-pll-supply = <&vreg_misc_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
+
+	status = "okay";
+};
+
+&sdhc {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&ssphy_0 {
+	vdda-pll-supply = <&vreg_misc_1p8>;
+	vdda-phy-supply = <&vreg_misc_0p925>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio19";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio42";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+	spi0_default_state: spi0-default-state {
+		clk-pins {
+			pins = "gpio6";
+			function = "spi0_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		cs-pins {
+			pins = "gpio7";
+			function = "spi0_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		miso-pins {
+			pins = "gpio8";
+			function = "spi0_miso";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mosi-pins {
+			pins = "gpio9";
+			function = "spi0_mosi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	uart0_pins: uart0-default-state {
+		pins = "gpio10", "gpio11", "gpio12", "gpio13";
+		function = "uart0";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+	pcie2_default_state: pcie2-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	pcie3_default_state: pcie3-default-state {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	/*
+	 * The required initialization for this SE is not handled by the
+	 * bootloader. Therefore, keep the device in "reserved" state until
+	 * linux gains support for configuring the SE.
+	 */
+	status = "reserved";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+/*
+ * The bootstrap pins for the board select the XO clock frequency that
+ * supports 48 MHZ, 96 MHZ or 192 MHZ. This setting automatically
+ * enables the right dividers, to ensure the reference clock output
+ * from WiFi to the CMN PLL is 48 MHZ.
+ */
+&ref_48mhz_clk {
+	clock-div = <1>;
+	clock-mult = <1>;
+};
+
+/*
+ * The frequency of xo_board is fixed to 24 MHZ, which is routed
+ * from WiFi output clock 48 MHZ divided by 2.
+ */
+&xo_board {
+	clock-div = <2>;
+	clock-mult = <1>;
+};
+
+&xo_clk {
+	clock-frequency = <48000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
new file mode 100644
index 000000000000..eb393f3fd728
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -0,0 +1,1429 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5424 device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq5424-cmn-pll.h>
+#include <dt-bindings/clock/qcom,ipq5424-gcc.h>
+#include <dt-bindings/reset/qcom,ipq5424-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq5424.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		ref_48mhz_clk: ref-48mhz-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&xo_clk>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&ref_48mhz_clk>;
+			#clock-cells = <0>;
+		};
+
+		xo_clk: xo-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+			#cooling-cells = <2>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+
+				l3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x100>;
+			next-level-cache = <&l2_100>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+			#cooling-cells = <2>;
+
+			l2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x200>;
+			next-level-cache = <&l2_200>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+			#cooling-cells = <2>;
+
+			l2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x300>;
+			next-level-cache = <&l2_300>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+			#cooling-cells = <2>;
+
+			l2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq5424", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x25100>;
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <984000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1272000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-dsu {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bootloader@8a200000 {
+			reg = <0x0 0x8a200000 0x0 0x400000>;
+			no-map;
+		};
+
+		tz@8a600000 {
+			reg = <0x0 0x8a600000 0x0 0x200000>;
+			no-map;
+		};
+
+		smem@8a800000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x8a800000 0x0 0x32000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		tfa@8a832000 {
+			reg = <0x0 0x8a832000 0x0 0x80000>;
+			no-map;
+			status = "disabled";
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		pcie0_phy: phy@84000 {
+			compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x00084000 0x0 0x1000>;
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie0_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@8c000 {
+			compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x0008c000 0x0 0x1000>;
+			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie1_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		cmn_pll: clock-controller@9b000 {
+			compatible = "qcom,ipq5424-cmn-pll";
+			reg = <0 0x0009b000 0 0x800>;
+			clocks = <&ref_48mhz_clk>,
+				 <&gcc GCC_CMN_12GPLL_AHB_CLK>,
+				 <&gcc GCC_CMN_12GPLL_SYS_CLK>;
+			clock-names = "ref", "ahb", "sys";
+			#clock-cells = <1>;
+			assigned-clocks = <&cmn_pll IPQ5424_CMN_PLL_CLK>;
+			assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
+		};
+
+		efuse@a4000 {
+			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+			reg = <0 0x000a4000 0 0x741>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_sens9_off: s9@3dc {
+				reg = <0x3dc 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens10_off: s10@3dd {
+				reg = <0x3dd 0x1>;
+				bits = <0 4>;
+			};
+
+			tsens_sens11_off: s11@3dd {
+				reg = <0x3dd 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens12_off: s12@3de {
+				reg = <0x3de 0x1>;
+				bits = <0 4>;
+			};
+
+			tsens_sens13_off: s13@3de {
+				reg = <0x3de 0x1>;
+				bits = <4 4>;
+			};
+
+			tsens_sens14_off: s14@3e5 {
+				reg = <0x3e5 0x2>;
+				bits = <7 4>;
+			};
+
+			tsens_sens15_off: s15@3e6 {
+				reg = <0x3e6 0x1>;
+				bits = <3 4>;
+			};
+
+			tsens_mode: mode@419 {
+				reg = <0x419 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base0: base0@419 {
+				reg = <0x419 0x2>;
+				bits = <3 10>;
+			};
+
+			tsens_base1: base1@41a {
+				reg = <0x41a 0x2>;
+				bits = <5 10>;
+			};
+		};
+
+		pcie2_phy: phy@f4000 {
+			compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x000f4000 0x0 0x2000>;
+			clocks = <&gcc GCC_PCIE2_AUX_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE2_PHY_BCR>,
+				 <&gcc GCC_PCIE2PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie2_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie3_phy: phy@fc000 {
+			compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x000fc000 0x0 0x2000>;
+			clocks = <&gcc GCC_PCIE3_AUX_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE3_PHY_BCR>,
+				 <&gcc GCC_PCIE3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie3_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5424-tsens";
+			reg = <0 0x004a9000 0 0x1000>,
+			      <0 0x004a8000 0 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "combined";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base0>,
+				      <&tsens_base1>,
+				      <&tsens_sens9_off>,
+				      <&tsens_sens10_off>,
+				      <&tsens_sens11_off>,
+				      <&tsens_sens12_off>,
+				      <&tsens_sens13_off>,
+				      <&tsens_sens14_off>,
+				      <&tsens_sens15_off>;
+			nvmem-cell-names = "mode",
+					   "base0",
+					   "base1",
+					   "tsens_sens9_off",
+					   "tsens_sens10_off",
+					   "tsens_sens11_off",
+					   "tsens_sens12_off",
+					   "tsens_sens13_off",
+					   "tsens_sens14_off",
+					   "tsens_sens15_off";
+			#qcom,sensors = <7>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		rng: rng@4c3000 {
+			compatible = "qcom,ipq5424-trng", "qcom,trng";
+			reg = <0 0x004c3000 0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		system-cache-controller@800000 {
+			compatible = "qcom,ipq5424-llcc";
+			reg = <0 0x00800000 0 0x200000>;
+			reg-names = "llcc0_base";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qfprom@a6000 {
+			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+			reg = <0x0 0x000a6000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@234 {
+				reg = <0x234 0x1>;
+				bits = <0 8>;
+			};
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq5424-tlmm";
+			reg = <0 0x01000000 0 0x300000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 50>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart1_pins: uart1-state {
+				pins = "gpio43", "gpio44";
+				function = "uart1";
+				drive-strength = <8>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq5424-gcc";
+			reg = <0 0x01800000 0 0x40000>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie2_phy>,
+				 <&pcie3_phy>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#interconnect-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01905000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq5424", "syscon";
+			reg = <0 0x01937000 0 0x2a000>;
+		};
+
+		qupv3: geniqup@1ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x01ac0000 0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>,
+				 <&gcc GCC_QUPV3_AHB_SLV_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			uart0: serial@1a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x01a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_UART0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			uart1: serial@1a84000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x01a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_UART1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			spi0: spi@1a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x01a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_SPI0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@1a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x01a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_SPI1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq5424-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x07804000 0 0x1000>, <0 0x07805000 0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			supports-cqe;
+
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0xf200000 0 0x10000>, /* GICD */
+			      <0 0xf240000 0 0x80000>; /* GICR * 4 regions */
+			#address-cells = <0>;
+			#interrupt-cells = <0x3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			mbi-ranges = <672 128>;
+			msi-controller;
+		};
+
+		watchdog@f410000 {
+			compatible = "qcom,apss-wdt-ipq5424", "qcom,kpss-wdt";
+			reg = <0 0x0f410000 0 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
+		qusb_phy_1: phy@71000 {
+			compatible = "qcom,ipq5424-qusb2-phy";
+			reg = <0 0x00071000 0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				<&xo_board>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb2: usb2@1e00000 {
+			compatible = "qcom,ipq5424-dwc3", "qcom,dwc3";
+			reg = <0 0x01ef8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB1_MASTER_CLK>,
+				 <&gcc GCC_USB1_SLEEP_CLK>,
+				 <&gcc GCC_USB1_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_CNOC_USB_CLK>;
+
+			clock-names = "core",
+				      "sleep",
+				      "mock_utmi",
+				      "iface",
+				      "cfg_noc";
+
+			assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			interrupts-extended = <&intc GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			resets = <&gcc GCC_USB1_BCR>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			dwc_1: usb@1e00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x01e00000 0 0xe000>;
+				clocks = <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		qusb_phy_0: phy@7b000 {
+			compatible = "qcom,ipq5424-qusb2-phy";
+			reg = <0 0x0007b000 0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				<&xo_board>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		ssphy_0: phy@7d000 {
+			compatible = "qcom,ipq5424-qmp-usb3-phy";
+			reg = <0 0x0007d000 0 0xa00>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb0_pipe_clk";
+
+			status = "disabled";
+		};
+
+		usb3: usb3@8a00000 {
+			compatible = "qcom,ipq5424-dwc3", "qcom,dwc3";
+			reg = <0 0x08af8800 0 0x400>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_CNOC_USB_CLK>;
+
+			clock-names = "core",
+				      "sleep",
+				      "mock_utmi",
+				      "iface",
+				      "cfg_noc";
+
+			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			interrupts-extended = <&intc GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			resets = <&gcc GCC_USB_BCR>;
+			status = "disabled";
+
+			dwc_0: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x08a00000 0 0xcd00>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+			};
+		};
+
+		timer@f420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0xf420000 0 0x1000>;
+			ranges = <0 0 0 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@f421000 {
+				reg = <0xf421000 0x1000>,
+				      <0xf422000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@f423000 {
+				reg = <0xf423000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@f425000 {
+				reg = <0xf425000 0x1000>,
+				      <0xf426000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@f427000 {
+				reg = <0xf427000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@f429000 {
+				reg = <0xf429000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@f42b000 {
+				reg = <0xf42b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@f42d000 {
+				reg = <0xf42d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		apss_clk: clock-controller@fa80000 {
+			compatible = "qcom,ipq5424-apss-clk";
+			reg = <0x0 0x0fa80000 0x0 0x20000>;
+			clocks = <&xo_board>,
+				 <&gcc GPLL0>;
+			#clock-cells = <1>;
+			#interconnect-cells = <1>;
+		};
+
+		clock-controller@39b00000 {
+			compatible = "qcom,ipq5424-nsscc";
+			reg = <0 0x39b00000 0 0x100000>;
+			clocks = <&cmn_pll IPQ5424_XO_24MHZ_CLK>,
+				 <&cmn_pll IPQ5424_NSS_300MHZ_CLK>,
+				 <&cmn_pll IPQ5424_PPE_375MHZ_CLK>,
+				 <&gcc GPLL0_OUT_AUX>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&gcc GCC_NSSCC_CLK>;
+			clock-names = "xo",
+				      "nss",
+				      "ppe",
+				      "gpll0_out",
+				      "uniphy0_rx",
+				      "uniphy0_tx",
+				      "uniphy1_rx",
+				      "uniphy1_tx",
+				      "uniphy2_rx",
+				      "uniphy2_tx",
+				      "bus";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#interconnect-cells = <1>;
+		};
+
+		pcie3: pcie@40000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x40000000 0x0 0xf1c>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x000f8000 0x0 0x3000>,
+			      <0x0 0x40100000 0x0 0x1000>,
+			      <0x0 0x000fe000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 480 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3_RCHNG_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE3_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE3_PIPE_ARES>,
+				 <&gcc GCC_PCIE3_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_S_ARES>,
+				 <&gcc GCC_PCIE3_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_M_ARES>,
+				 <&gcc GCC_PCIE3_AUX_ARES>,
+				 <&gcc GCC_PCIE3_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie3_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
+					<&gcc MASTER_CNOC_PCIE3 &gcc SLAVE_CNOC_PCIE3>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie2: pcie@50000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x50000000 0x0 0xf1c>,
+			      <0x0 0x50000f20 0x0 0xa8>,
+			      <0x0 0x50001000 0x0 0x1000>,
+			      <0x0 0x000f0000 0x0 0x3000>,
+			      <0x0 0x50100000 0x0 0x1000>,
+			      <0x0 0x000f6000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x50200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x50300000 0x0 0x50300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE2_RCHNG_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE2_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE2_PIPE_ARES>,
+				 <&gcc GCC_PCIE2_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_S_ARES>,
+				 <&gcc GCC_PCIE2_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_M_ARES>,
+				 <&gcc GCC_PCIE2_AUX_ARES>,
+				 <&gcc GCC_PCIE2_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie2_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
+					<&gcc MASTER_CNOC_PCIE2 &gcc SLAVE_CNOC_PCIE2>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie1: pcie@60000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x60000000 0x0 0xf1c>,
+			      <0x0 0x60000f20 0x0 0xa8>,
+			      <0x0 0x60001000 0x0 0x1000>,
+			      <0x0 0x00088000 0x0 0x3000>,
+			      <0x0 0x60100000 0x0 0x1000>,
+			      <0x0 0x0008e000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE1_RCHNG_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE1_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_S_ARES>,
+				 <&gcc GCC_PCIE1_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_M_ARES>,
+				 <&gcc GCC_PCIE1_AUX_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE1	&gcc SLAVE_ANOC_PCIE1>,
+					<&gcc MASTER_CNOC_PCIE1	&gcc SLAVE_CNOC_PCIE1>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0: pcie@70000000 {
+			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
+			reg = <0x0 0x70000000 0x0 0xf1c>,
+			      <0x0 0x70000f20 0x0 0xa8>,
+			      <0x0 0x70001000 0x0 0x1000>,
+			      <0x0 0x00080000 0x0 0x3000>,
+			      <0x0 0x70100000 0x0 0x1000>,
+			      <0x0 0x00086000 0x0 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x0fd00000>;
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE0_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_S_ARES>,
+				 <&gcc GCC_PCIE0_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_M_ARES>,
+				 <&gcc GCC_PCIE0_AUX_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
+					<&gcc MASTER_CNOC_PCIE0	&gcc SLAVE_CNOC_PCIE0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				cpu0_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu0_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				cpu1_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu1_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				cpu2_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu2_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cpu3_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+
+				cpu3_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <9000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		wcss-tile2-thermal {
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				wcss-tile2-critical {
+					temperature = <125000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-tile3-thermal {
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				wcss-tile3-critical {
+					temperature = <125000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top-glue-critical {
+					temperature = <125000>;
+					hysteresis = <9000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index f5f4827c0e17..9c69d3027b43 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -7,7 +7,7 @@
 
 /dts-v1/;
 
-#include "ipq6018.dtsi"
+#include "ipq6018-mp5496.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1";
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi b/arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi
new file mode 100644
index 000000000000..d6b111a77f79
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * ipq6018-mp5496.dtsi describes common properties (e.g. regulators) that
+ * apply to most devices that make use of the IPQ6018 SoC and MP5496 PMIC.
+ */
+
+#include "ipq6018.dtsi"
+
+&cpu0 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&cpu1 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&cpu2 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&cpu3 {
+	cpu-supply = <&mp5496_s2>;
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		mp5496_s2: s2 {
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1062500>;
+			regulator-always-on;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+&sdhc {
+	vqmmc-supply = <&mp5496_l2>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index dbf6716bcb59..40f1c262126e 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -43,7 +43,6 @@
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
 			#cooling-cells = <2>;
 		};
 
@@ -56,7 +55,6 @@
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
 			#cooling-cells = <2>;
 		};
 
@@ -69,7 +67,6 @@
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
 			#cooling-cells = <2>;
 		};
 
@@ -82,7 +79,6 @@
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
-			cpu-supply = <&ipq6018_s2>;
 			#cooling-cells = <2>;
 		};
 
@@ -119,6 +115,13 @@
 			clock-latency-ns = <200000>;
 		};
 
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x4>;
+			clock-latency-ns = <200000>;
+		};
+
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
@@ -133,6 +136,13 @@
 			clock-latency-ns = <200000>;
 		};
 
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <937500>;
+			opp-supported-hw = <0x2>;
+			clock-latency-ns = <200000>;
+		};
+
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
@@ -170,16 +180,6 @@
 			rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-ipq6018", "qcom,glink-smd-rpm";
 				qcom,glink-channels = "rpm_requests";
-
-				regulators {
-					compatible = "qcom,rpm-mp5496-regulators";
-
-					ipq6018_s2: s2 {
-						regulator-min-microvolt = <725000>;
-						regulator-max-microvolt = <1062500>;
-						regulator-always-on;
-					};
-				};
 			};
 		};
 	};
@@ -210,8 +210,11 @@
 		};
 
 		smem_region: memory@4aa00000 {
+			compatible = "qcom,smem";
 			reg = <0x0 0x4aa00000 0x0 0x100000>;
 			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
 		};
 
 		q6_region: memory@4ab00000 {
@@ -220,12 +223,6 @@
 		};
 	};
 
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_region>;
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -888,15 +885,31 @@
 			ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
 				 <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
 
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 78e1992b7495..256e12cf6d54 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -847,17 +847,33 @@
 			ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
 				 <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
 
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 142
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 143
+					<0 0 0 2 &intc 0 GIC_SPI 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 144
+					<0 0 0 3 &intc 0 GIC_SPI 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 145
+					<0 0 0 4 &intc 0 GIC_SPI 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -919,17 +935,33 @@
 			ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>,   /* I/O */
 				 <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
 
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 75
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 78
+					<0 0 0 2 &intc 0 GIC_SPI 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 79
+					<0 0 0 3 &intc 0 GIC_SPI 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 83
+					<0 0 0 4 &intc 0 GIC_SPI 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index 91e104b0f865..bdb396afb992 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -3,7 +3,7 @@
  * IPQ9574 RDP board common device tree source
  *
  * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 /dts-v1/;
@@ -111,6 +111,13 @@
 			regulator-always-on;
 			regulator-boot-on;
 		};
+
+		mp5496_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 	};
 };
 
@@ -139,6 +146,50 @@
 		drive-strength = <8>;
 		bias-pull-up;
 	};
+
+	qpic_snand_default_state: qpic-snand-default-state {
+		clock-pins {
+			pins = "gpio5";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cs-pins {
+			pins = "gpio4";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qpic_snand_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-engine = <&qpic_nand>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
 };
 
 &usb_0_dwc3 {
@@ -146,7 +197,7 @@
 };
 
 &usb_0_qmpphy {
-	vdda-pll-supply = <&mp5496_l2>;
+	vdda-pll-supply = <&mp5496_l5>;
 	vdda-phy-supply = <&regulator_fixed_0p925>;
 
 	status = "okay";
@@ -154,7 +205,7 @@
 
 &usb_0_qusbphy {
 	vdd-supply = <&regulator_fixed_0p925>;
-	vdda-pll-supply = <&mp5496_l2>;
+	vdda-pll-supply = <&mp5496_l5>;
 	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
 
 	status = "okay";
@@ -164,6 +215,26 @@
 	status = "okay";
 };
 
+/*
+ * The bootstrap pins for the board select the XO clock frequency
+ * (48 MHZ or 96 MHZ used for different RDP type board). This setting
+ * automatically enables the right dividers, to ensure the reference
+ * clock output from WiFi to the CMN PLL is 48 MHZ.
+ */
+&ref_48mhz_clk {
+	clock-div = <1>;
+	clock-mult = <1>;
+};
+
+/*
+ * The frequency of xo_board_clk is fixed to 24 MHZ, which is routed
+ * from WiFi output clock 48 MHZ divided by 2.
+ */
 &xo_board_clk {
-	clock-frequency = <24000000>;
+	clock-div = <2>;
+	clock-mult = <1>;
+};
+
+&xo_clk {
+	clock-frequency = <48000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 1bb8d96c9a82..5a546a14998b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "ipq9574-rdp-common.dtsi"
 
 / {
@@ -15,48 +16,116 @@
 	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
 };
 
-&sdhc_1 {
-	pinctrl-0 = <&sdc_default_state>;
+&pcie1_phy {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default>;
 	pinctrl-names = "default";
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	max-frequency = <384000000>;
-	bus-width = <8>;
+
+	perst-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie2_phy {
+	status = "okay";
+};
+
+&pcie2 {
+	pinctrl-0 = <&pcie2_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie3_phy {
+	status = "okay";
+};
+
+&pcie3 {
+	pinctrl-0 = <&pcie3_default>;
+	pinctrl-names = "default";
+
+	perst-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &tlmm {
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio5";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
+
+	pcie1_default: pcie1-default-state {
+		clkreq-n-pins {
+			pins = "gpio25";
+			function = "pcie1_clk";
+			drive-strength = <6>;
+			bias-pull-up;
 		};
 
-		cmd-pins {
-			pins = "gpio4";
-			function = "sdc_cmd";
+		perst-n-pins {
+			pins = "gpio26";
+			function = "gpio";
 			drive-strength = <8>;
+			bias-pull-down;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio27";
+			function = "pcie1_wake";
+			drive-strength = <6>;
 			bias-pull-up;
 		};
+	};
 
-		data-pins {
-			pins = "gpio0", "gpio1", "gpio2",
-			       "gpio3", "gpio6", "gpio7",
-			       "gpio8", "gpio9";
-			function = "sdc_data";
-			drive-strength = <8>;
+	pcie2_default: pcie2-default-state {
+		clkreq-n-pins {
+			pins = "gpio28";
+			function = "pcie2_clk";
+			drive-strength = <6>;
 			bias-pull-up;
 		};
 
-		rclk-pins {
-			pins = "gpio10";
-			function = "sdc_rclk";
+		perst-n-pins {
+			pins = "gpio29";
+			function = "gpio";
 			drive-strength = <8>;
 			bias-pull-down;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio30";
+			function = "pcie2_wake";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3_default: pcie3-default-state {
+		clkreq-n-pins {
+			pins = "gpio31";
+			function = "pcie3_clk";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			output-low;
+		};
+
+		wake-n-pins {
+			pins = "gpio33";
+			function = "pcie3_wake";
+			drive-strength = <6>;
+			bias-pull-up;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index d1fd35ebc4a2..86c9cb9fffc9 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -3,10 +3,11 @@
  * IPQ9574 SoC device tree source
  *
  * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq-cmn-pll.h>
 #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
 #include <dt-bindings/interconnect/qcom,ipq9574.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -19,12 +20,24 @@
 	#size-cells = <2>;
 
 	clocks {
+		ref_48mhz_clk: ref-48mhz-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&xo_clk>;
+			#clock-cells = <0>;
+		};
+
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
 
 		xo_board_clk: xo-board-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&ref_48mhz_clk>;
+			#clock-cells = <0>;
+		};
+
+		xo_clk: xo-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
@@ -226,8 +239,54 @@
 			reg = <0x00060000 0x6000>;
 		};
 
+		pcie0_phy: phy@84000 {
+			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0x00084000 0x1000>;
+
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie0_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie2_phy: phy@8c000 {
+			compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0x0008c000 0x2000>;
+
+			clocks = <&gcc GCC_PCIE2_AUX_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE2_PHY_BCR>,
+				 <&gcc GCC_PCIE2PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie2_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		rng: rng@e3000 {
-			compatible = "qcom,prng-ee";
+			compatible = "qcom,ipq9574-trng", "qcom,trng";
 			reg = <0x000e3000 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
@@ -243,6 +302,64 @@
 			status = "disabled";
 		};
 
+		pcie3_phy: phy@f4000 {
+			compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0x000f4000 0x2000>;
+
+			clocks = <&gcc GCC_PCIE3_AUX_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE3_PHY_BCR>,
+				 <&gcc GCC_PCIE3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie3_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@fc000 {
+			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0x000fc000 0x1000>;
+
+			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie1_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		cmn_pll: clock-controller@9b000 {
+			compatible = "qcom,ipq9574-cmn-pll";
+			reg = <0x0009b000 0x800>;
+			clocks = <&ref_48mhz_clk>,
+				 <&gcc GCC_CMN_12GPLL_AHB_CLK>,
+				 <&gcc GCC_CMN_12GPLL_SYS_CLK>;
+			clock-names = "ref", "ahb", "sys";
+			#clock-cells = <1>;
+			assigned-clocks = <&cmn_pll CMN_PLL_CLK>;
+			assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
+		};
+
 		qfprom: efuse@a4000 {
 			compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
 			reg = <0x000a4000 0x5a1>;
@@ -261,6 +378,8 @@
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 		};
 
@@ -309,10 +428,10 @@
 			clocks = <&xo_board_clk>,
 				 <&sleep_clk>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie2_phy>,
+				 <&pcie3_phy>,
 				 <0>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -556,6 +675,33 @@
 			status = "disabled";
 		};
 
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x07984000 0x1c000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		qpic_nand: spi@79b0000 {
+			compatible = "qcom,ipq9574-snand";
+			reg = <0x079b0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>,
+				 <&gcc GCC_QPIC_IO_MACRO_CLK>;
+			clock-names = "core", "aon", "iom";
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
 		usb_0_qusbphy: phy@7b000 {
 			compatible = "qcom,ipq9574-qusb2-phy";
 			reg = <0x0007b000 0x180>;
@@ -756,6 +902,379 @@
 				status = "disabled";
 			};
 		};
+
+		pcie1: pcie@10000000 {
+			compatible = "qcom,pcie-ipq9574";
+			reg = <0x10000000 0xf1d>,
+			      <0x10000f20 0xa8>,
+			      <0x10001000 0x1000>,
+			      <0x000f8000 0x4000>,
+			      <0x10100000 0x1000>,
+			      <0x000fe000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x10200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x10300000 0x10300000 0x0 0x7d00000>;
+
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE1_RCHNG_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_S_ARES>,
+				 <&gcc GCC_PCIE1_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_M_ARES>,
+				 <&gcc GCC_PCIE1_AUX_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE1 &gcc SLAVE_ANOC_PCIE1>,
+					<&gcc MASTER_SNOC_PCIE1 &gcc SLAVE_SNOC_PCIE1>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		pcie3: pcie@18000000 {
+			compatible = "qcom,pcie-ipq9574";
+			reg = <0x18000000 0xf1d>,
+			      <0x18000f20 0xa8>,
+			      <0x18001000 0x1000>,
+			      <0x000f0000 0x4000>,
+			      <0x18100000 0x1000>,
+			      <0x000f6000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x18300000 0x18300000 0x0 0x7d00000>;
+
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3_RCHNG_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			resets = <&gcc GCC_PCIE3_PIPE_ARES>,
+				 <&gcc GCC_PCIE3_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE3_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE3_AXI_S_ARES>,
+				 <&gcc GCC_PCIE3_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE3_AXI_M_ARES>,
+				 <&gcc GCC_PCIE3_AUX_ARES>,
+				 <&gcc GCC_PCIE3_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie3_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
+					<&gcc MASTER_SNOC_PCIE3 &gcc SLAVE_SNOC_PCIE3>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		pcie2: pcie@20000000 {
+			compatible = "qcom,pcie-ipq9574";
+			reg = <0x20000000 0xf1d>,
+			      <0x20000f20 0xa8>,
+			      <0x20001000 0x1000>,
+			      <0x00088000 0x4000>,
+			      <0x20100000 0x1000>,
+			      <0x0008e000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x20300000 0x20300000 0x0 0x7d00000>;
+
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE2_RCHNG_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			resets = <&gcc GCC_PCIE2_PIPE_ARES>,
+				 <&gcc GCC_PCIE2_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE2_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE2_AXI_S_ARES>,
+				 <&gcc GCC_PCIE2_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE2_AXI_M_ARES>,
+				 <&gcc GCC_PCIE2_AUX_ARES>,
+				 <&gcc GCC_PCIE2_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie2_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
+					<&gcc MASTER_SNOC_PCIE2 &gcc SLAVE_SNOC_PCIE2>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		pcie0: pcie@28000000 {
+			compatible = "qcom,pcie-ipq9574";
+			reg = <0x28000000 0xf1d>,
+			      <0x28000f20 0xa8>,
+			      <0x28001000 0x1000>,
+			      <0x00080000 0x4000>,
+			      <0x28100000 0x1000>,
+			      <0x00086000 0x1000>;
+			reg-names = "dbi",
+				    "elbi",
+				    "atu",
+				    "parf",
+				    "config",
+				    "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x28200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x28300000 0x28300000 0x0 0x7d00000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_S_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_S_ARES>,
+				 <&gcc GCC_PCIE0_AXI_M_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_M_ARES>,
+				 <&gcc GCC_PCIE0_AUX_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
+					<&gcc MASTER_SNOC_PCIE0 &gcc SLAVE_SNOC_PCIE0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		nsscc: clock-controller@39b00000 {
+			compatible = "qcom,ipq9574-nsscc";
+			reg = <0x39b00000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&cmn_pll NSS_1200MHZ_CLK>,
+				 <&cmn_pll PPE_353MHZ_CLK>,
+				 <&gcc GPLL0_OUT_AUX>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&gcc GCC_NSSCC_CLK>;
+			clock-names = "xo",
+				      "nss_1200",
+				      "ppe_353",
+				      "gpll0_out",
+				      "uniphy0_rx",
+				      "uniphy0_tx",
+				      "uniphy1_rx",
+				      "uniphy1_tx",
+				      "uniphy2_rx",
+				      "uniphy2_tx",
+				      "bus";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#interconnect-cells = <1>;
+		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index 55db1c83ef55..c2ccbb67f800 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
@@ -6,6 +6,7 @@
  */
 #include <dt-bindings/clock/qcom,camcc-sc7280.h>
 #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc7280.h>
 #include <dt-bindings/clock/qcom,gpucc-sc7280.h>
 #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
@@ -27,6 +28,8 @@
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,lpass.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -83,7 +86,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -618,12 +621,12 @@
 
 		cpu4_opp_2400mhz: opp-2400000000 {
 			opp-hz = /bits/ 64 <2400000000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu4_opp_2611mhz: opp-2611200000 {
 			opp-hz = /bits/ 64 <2611200000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 	};
 
@@ -683,22 +686,22 @@
 
 		cpu7_opp_2400mhz: opp-2400000000 {
 			opp-hz = /bits/ 64 <2400000000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu7_opp_2515mhz: opp-2515200000 {
 			opp-hz = /bits/ 64 <2515200000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu7_opp_2707mhz: opp-2707200000 {
 			opp-hz = /bits/ 64 <2707200000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu7_opp_3014mhz: opp-3014400000 {
 			opp-hz = /bits/ 64 <3014400000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 	};
 
@@ -2198,6 +2201,135 @@
 			qcom,smem-state-names = "wlan-smp2p-out";
 		};
 
+		pcie0: pcie@1c00000 {
+			compatible = "qcom,pcie-sc7280";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>,
+			      <0 0x01c03000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+				 <&pcie0_phy>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu",
+				      "aggre0",
+				      "aggre1";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_clkreq_n>;
+			dma-coherent;
+
+			status = "disabled";
+
+			pcie0_port: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x1000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_EN>,
+				 <&gcc GCC_PCIE0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
 		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sc7280";
 			reg = <0 0x01c08000 0 0x3000>,
@@ -2225,15 +2357,23 @@
 				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi0", "msi1", "msi2", "msi3",
-					  "msi4", "msi5", "msi6", "msi7";
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
@@ -2363,18 +2503,52 @@
 				      "tx_lane0_sync_clk",
 				      "rx_lane0_sync_clk",
 				      "rx_lane1_sync_clk";
-			freq-table-hz =
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
+
+			operating-points-v2 = <&ufs_opp_table>;
+
 			qcom,ice = <&ice>;
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-75000000 {
+					opp-hz = /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
@@ -2600,6 +2774,66 @@
 			status = "disabled";
 		};
 
+		lpass_wsa_macro: codec@3240000 {
+			compatible = "qcom,sc7280-lpass-wsa-macro";
+			reg = <0x0 0x03240000 0x0 0x1000>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_va_macro>;
+			clock-names = "mclk",
+				      "npl",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			pinctrl-0 = <&lpass_wsa_swr_clk>, <&lpass_wsa_swr_data>;
+			pinctrl-names = "default";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		swr2: soundwire@3250000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0x0 0x03250000 0x0 0x2000>;
+
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa_macro>;
+			clock-names = "iface";
+
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>;
+			reset-names = "swr_audio_cgcr";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07
+								0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01
+							       0xff 0xff>;
+			qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
+								0xff 0xff>;
+			qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
+							    0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
 		lpass_audiocc: clock-controller@3300000 {
 			compatible = "qcom,sc7280-lpassaudiocc";
 			reg = <0 0x03300000 0 0x30000>,
@@ -2617,9 +2851,6 @@
 			compatible = "qcom,sc7280-lpass-va-macro";
 			reg = <0 0x03370000 0 0x1000>;
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
-
 			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
 			clock-names = "mclk";
 
@@ -2770,41 +3001,77 @@
 			lpass_dmic01_clk: dmic01-clk-state {
 				pins = "gpio6";
 				function = "dmic1_clk";
+				drive-strength = <8>;
+				bias-disable;
 			};
 
 			lpass_dmic01_data: dmic01-data-state {
 				pins = "gpio7";
 				function = "dmic1_data";
+				drive-strength = <8>;
+				bias-pull-down;
 			};
 
 			lpass_dmic23_clk: dmic23-clk-state {
 				pins = "gpio8";
 				function = "dmic2_clk";
+				drive-strength = <8>;
+				bias-disable;
 			};
 
 			lpass_dmic23_data: dmic23-data-state {
 				pins = "gpio9";
 				function = "dmic2_data";
+				drive-strength = <8>;
+				bias-pull-down;
 			};
 
 			lpass_rx_swr_clk: rx-swr-clk-state {
 				pins = "gpio3";
 				function = "swr_rx_clk";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-disable;
 			};
 
 			lpass_rx_swr_data: rx-swr-data-state {
 				pins = "gpio4", "gpio5";
 				function = "swr_rx_data";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-bus-hold;
 			};
 
 			lpass_tx_swr_clk: tx-swr-clk-state {
 				pins = "gpio0";
 				function = "swr_tx_clk";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-disable;
 			};
 
 			lpass_tx_swr_data: tx-swr-data-state {
 				pins = "gpio1", "gpio2", "gpio14";
 				function = "swr_tx_data";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-bus-hold;
+			};
+
+			lpass_wsa_swr_clk: wsa-swr-clk-state {
+				pins = "gpio10";
+				function = "wsa_swr_clk";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-disable;
+			};
+
+			lpass_wsa_swr_data: wsa-swr-data-state {
+				pins = "gpio11";
+				function = "wsa_swr_data";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-bus-hold;
 			};
 		};
 
@@ -3071,6 +3338,86 @@
 			};
 		};
 
+		tpda@6004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x06004000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1c {
+					reg = <0x1c>;
+
+					qdss_tpda_in28: endpoint {
+						remote-endpoint = <&spdm_tpdm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_tpda_out: endpoint {
+						remote-endpoint = <&qdss_dl_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@6005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06005000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					qdss_dl_funnel_in0: endpoint {
+						remote-endpoint = <&qdss_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_dl_funnel_out: endpoint {
+						remote-endpoint = <&funnel0_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@600f000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x0600f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					spdm_tpdm_out: endpoint {
+						remote-endpoint = <&qdss_tpda_in28>;
+					};
+				};
+			};
+		};
+
+		cti@6010000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06010000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
 		funnel@6041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0 0x06041000 0 0x1000>;
@@ -3090,6 +3437,14 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@6 {
+					reg = <6>;
+
+					funnel0_in6: endpoint {
+						remote-endpoint = <&qdss_dl_funnel_out>;
+					};
+				};
+
 				port@7 {
 					reg = <7>;
 					funnel0_in7: endpoint {
@@ -3204,6 +3559,38 @@
 			};
 		};
 
+		cti@6b00000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b00000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6b01000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b01000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6b02000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b02000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6b03000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b03000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
 		funnel@6b04000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0 0x06b04000 0 0x1000>;
@@ -3223,6 +3610,14 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@6 {
+					reg = <6>;
+
+					swao_funnel_in6: endpoint {
+						remote-endpoint = <&aoss_tpda_out>;
+					};
+				};
+
 				port@7 {
 					reg = <7>;
 					swao_funnel_in: endpoint {
@@ -3281,6 +3676,170 @@
 			};
 		};
 
+		tpda@6b08000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x06b08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					aoss_tpda_in0: endpoint {
+						remote-endpoint = <&swao_prio0_tpdm_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					aoss_tpda_in1: endpoint {
+						remote-endpoint = <&swao_prio1_tpdm_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					aoss_tpda_in2: endpoint {
+						remote-endpoint = <&swao_prio2_tpdm_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					aoss_tpda_in3: endpoint {
+						remote-endpoint = <&swao_prio3_tpdm_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					aoss_tpda_in4: endpoint {
+						remote-endpoint = <&swao_tpdm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					aoss_tpda_out: endpoint {
+						remote-endpoint = <&swao_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@6b09000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b09000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					swao_prio0_tpdm_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@6b0a000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b0a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					swao_prio1_tpdm_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@6b0b000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b0b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					swao_prio2_tpdm_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		tpdm@6b0c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b0c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					swao_prio3_tpdm_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@6b0d000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b0d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					swao_tpdm_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		cti@6b11000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b11000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
 		etm@7040000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x07040000 0 0x1000>;
@@ -3618,6 +4177,12 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
+		refgen: regulator@88e7000 {
+			compatible = "qcom,sc7280-refgen-regulator",
+				     "qcom,sm8250-refgen-regulator";
+			reg = <0x0 0x088e7000 0x0 0x84>;
+		};
+
 		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sc7280-qmp-usb3-dp-phy";
 			reg = <0 0x088e8000 0 0x3000>;
@@ -3639,6 +4204,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3654,6 +4221,7 @@
 					reg = <1>;
 
 					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -3661,19 +4229,16 @@
 					reg = <2>;
 
 					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp_out>;
 					};
 				};
 			};
 		};
 
-		usb_2: usb@8cf8800 {
-			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
-			reg = <0 0x08cf8800 0 0x400>;
+		usb_2: usb@8c00000 {
+			compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x08c00000 0 0xfc100>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			dma-ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
 				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
@@ -3690,11 +4255,13 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -3708,22 +4275,19 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_2_dwc3: usb@8c00000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x08c00000 0 0xe000>;
-				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0xa0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				usb-role-switch;
+			iommus = <&apps_smmu 0xa0 0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			phys = <&usb_2_hsphy>;
+			phy-names = "usb2-phy";
+			maximum-speed = "high-speed";
+			usb-role-switch;
 
-				port {
-					usb2_role_switch: endpoint {
-						remote-endpoint = <&eud_ep>;
-					};
+			port {
+				usb2_role_switch: endpoint {
+					remote-endpoint = <&eud_ep>;
 				};
 			};
 		};
@@ -3775,7 +4339,7 @@
 
 			status = "disabled";
 
-			glink-edge {
+			remoteproc_adsp_glink: glink-edge {
 				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
 							     IPCC_MPROC_SIGNAL_GLINK_QMP
 							     IRQ_TYPE_EDGE_RISING>;
@@ -3815,6 +4379,13 @@
 							compatible = "qcom,q6afe-clocks";
 							#clock-cells = <2>;
 						};
+
+						q6usbdai: usbd {
+							compatible = "qcom,q6usb";
+							iommus = <&apps_smmu 0x180f 0x0>;
+							#sound-dai-cells = <1>;
+							qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+						};
 					};
 
 					q6asm: service@7 {
@@ -3830,15 +4401,15 @@
 							iommus = <&apps_smmu 0x1801 0x0>;
 
 							dai@0 {
-								reg = <0>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 							};
 
 							dai@1 {
-								reg = <1>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 							};
 
 							dai@2 {
-								reg = <2>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 							};
 						};
 					};
@@ -3867,18 +4438,21 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x1803 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@4 {
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x1804 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@5 {
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x1805 0x0>;
+						dma-coherent;
 					};
 				};
 			};
@@ -3963,6 +4537,12 @@
 				opp-7 {
 					opp-peak-kBps = <8532000>;
 				};
+				opp-8 {
+					opp-peak-kBps = <10944000>;
+				};
+				opp-9 {
+					opp-peak-kBps = <12787200>;
+				};
 			};
 		};
 
@@ -4106,6 +4686,7 @@
 						reg = <1>;
 						iommus = <&apps_smmu 0x11a1 0x0420>,
 							 <&apps_smmu 0x1181 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@2 {
@@ -4113,6 +4694,7 @@
 						reg = <2>;
 						iommus = <&apps_smmu 0x11a2 0x0420>,
 							 <&apps_smmu 0x1182 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@3 {
@@ -4120,6 +4702,7 @@
 						reg = <3>;
 						iommus = <&apps_smmu 0x11a3 0x0420>,
 							 <&apps_smmu 0x1183 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@4 {
@@ -4127,6 +4710,7 @@
 						reg = <4>;
 						iommus = <&apps_smmu 0x11a4 0x0420>,
 							 <&apps_smmu 0x1184 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@5 {
@@ -4134,6 +4718,7 @@
 						reg = <5>;
 						iommus = <&apps_smmu 0x11a5 0x0420>,
 							 <&apps_smmu 0x1185 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@6 {
@@ -4141,6 +4726,7 @@
 						reg = <6>;
 						iommus = <&apps_smmu 0x11a6 0x0420>,
 							 <&apps_smmu 0x1186 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@7 {
@@ -4148,6 +4734,7 @@
 						reg = <7>;
 						iommus = <&apps_smmu 0x11a7 0x0420>,
 							 <&apps_smmu 0x1187 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@8 {
@@ -4155,6 +4742,7 @@
 						reg = <8>;
 						iommus = <&apps_smmu 0x11a8 0x0420>,
 							 <&apps_smmu 0x1188 0x0420>;
+						dma-coherent;
 					};
 
 					/* note: secure cb9 in downstream */
@@ -4164,6 +4752,7 @@
 						reg = <11>;
 						iommus = <&apps_smmu 0x11ab 0x0420>,
 							 <&apps_smmu 0x118b 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@12 {
@@ -4171,6 +4760,7 @@
 						reg = <12>;
 						iommus = <&apps_smmu 0x11ac 0x0420>,
 							 <&apps_smmu 0x118c 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@13 {
@@ -4178,6 +4768,7 @@
 						reg = <13>;
 						iommus = <&apps_smmu 0x11ad 0x0420>,
 							 <&apps_smmu 0x118d 0x0420>;
+						dma-coherent;
 					};
 
 					compute-cb@14 {
@@ -4185,19 +4776,16 @@
 						reg = <14>;
 						iommus = <&apps_smmu 0x11ae 0x0420>,
 							 <&apps_smmu 0x118e 0x0420>;
+						dma-coherent;
 					};
 				};
 			};
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
+		usb_1: usb@a600000 {
+			compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			dma-ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4214,12 +4802,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -4236,34 +4826,33 @@
 
 			wakeup-source;
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xe000>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0xe0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,parkmode-disable-ss-quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
-				maximum-speed = "super-speed";
+			iommus = <&apps_smmu 0xe0 0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,parkmode-disable-ss-quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			num-hc-interrupters = /bits/ 16 <3>;
+			phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
+			maximum-speed = "super-speed";
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+				port@0 {
+					reg = <0>;
 
-						usb_1_dwc3_hs: endpoint {
-						};
+					usb_1_dwc3_hs: endpoint {
 					};
+				};
 
-					port@1 {
-						reg = <1>;
+				port@1 {
+					reg = <1>;
 
-						usb_1_dwc3_ss: endpoint {
-						};
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 					};
 				};
 			};
@@ -4297,14 +4886,6 @@
 
 			status = "disabled";
 
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4426,6 +5007,184 @@
 			};
 		};
 
+		camss: isp@acb3000 {
+			compatible = "qcom,sc7280-camss";
+
+			reg = <0x0 0x0acb3000 0x0 0x1000>,
+			      <0x0 0x0acba000 0x0 0x1000>,
+			      <0x0 0x0acc1000 0x0 0x1000>,
+			      <0x0 0x0acc8000 0x0 0x1000>,
+			      <0x0 0x0accf000 0x0 0x1000>,
+			      <0x0 0x0ace0000 0x0 0x2000>,
+			      <0x0 0x0ace2000 0x0 0x2000>,
+			      <0x0 0x0ace4000 0x0 0x2000>,
+			      <0x0 0x0ace6000 0x0 0x2000>,
+			      <0x0 0x0ace8000 0x0 0x2000>,
+			      <0x0 0x0acaf000 0x0 0x4000>,
+			      <0x0 0x0acb6000 0x0 0x4000>,
+			      <0x0 0x0acbd000 0x0 0x4000>,
+			      <0x0 0x0acc4000 0x0 0x4000>,
+			      <0x0 0x0accb000 0x0 0x4000>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid_lite0",
+				    "csid_lite1",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "csiphy4",
+				    "vfe0",
+				    "vfe1",
+				    "vfe2",
+				    "vfe_lite0",
+				    "vfe_lite1";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_ICP_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_2_CLK>,
+				 <&camcc CAM_CC_IFE_2_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_2_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy4",
+				      "csiphy4_timer",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf",
+				      "icp_ahb",
+				      "vfe0",
+				      "vfe0_axi",
+				      "vfe0_cphy_rx",
+				      "vfe0_csid",
+				      "vfe1",
+				      "vfe1_axi",
+				      "vfe1_cphy_rx",
+				      "vfe1_csid",
+				      "vfe2",
+				      "vfe2_axi",
+				      "vfe2_cphy_rx",
+				      "vfe2_csid",
+				      "vfe_lite0",
+				      "vfe_lite0_cphy_rx",
+				      "vfe_lite0_csid",
+				      "vfe_lite1",
+				      "vfe_lite1_cphy_rx",
+				      "vfe_lite1_csid";
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "csiphy4",
+					  "vfe0",
+					  "vfe1",
+					  "vfe2",
+					  "vfe_lite0",
+					  "vfe_lite1";
+
+			interconnects = <&gem_noc  MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc2 SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_CAMNOC_HF  QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ahb",
+					     "hf_0";
+
+			iommus = <&apps_smmu 0x800 0x4e0>;
+
+			power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+					<&camcc CAM_CC_IFE_1_GDSC>,
+					<&camcc CAM_CC_IFE_2_GDSC>,
+					<&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "ife2",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
@@ -4443,8 +5202,8 @@
 			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <&mdss_dsi_phy 0>,
-				 <&mdss_dsi_phy 1>,
+				 <&mdss_dsi_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss_edp_phy 0>,
@@ -4489,6 +5248,8 @@
 
 			iommus = <&apps_smmu 0x900 0x402>;
 
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -4498,7 +5259,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sc7280-dpu";
 				reg = <0 0x0ae01000 0 0x8f030>,
-					<0 0x0aeb0000 0 0x2008>;
+					<0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -4601,14 +5362,18 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7280_CX>;
 
 				phys = <&mdss_dsi_phy>;
 
+				refgen-supply = <&refgen>;
+
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -4679,7 +5444,8 @@
 				reg = <0 0x0aea0000 0 0x200>,
 				      <0 0x0aea0200 0 0x200>,
 				      <0 0x0aea0400 0 0xc00>,
-				      <0 0x0aea1000 0 0x400>;
+				      <0 0x0aea1000 0 0x400>,
+				      <0 0x0aea1400 0 0x400>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <14>;
@@ -4816,7 +5582,9 @@
 
 					port@1 {
 						reg = <1>;
-						mdss_dp_out: endpoint { };
+						mdss_dp_out: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+						};
 					};
 				};
 
@@ -5046,6 +5814,11 @@
 				function = "mi2s1_ws";
 			};
 
+			pcie0_clkreq_n: pcie0-clkreq-n-state {
+				pins = "gpio88";
+				function = "pcie0_clkreqn";
+			};
+
 			pcie1_clkreq_n: pcie1-clkreq-n-state {
 				pins = "gpio79";
 				function = "pcie1_clkreqn";
diff --git a/arch/arm64/boot/dts/qcom/lemans-auto.dtsi b/arch/arm64/boot/dts/qcom/lemans-auto.dtsi
new file mode 100644
index 000000000000..8db958d60fd1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-auto.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "lemans.dtsi"
+
+/delete-node/ &pil_camera_mem;
+/delete-node/ &pil_adsp_mem;
+/delete-node/ &q6_adsp_dtb_mem;
+/delete-node/ &q6_gdsp0_dtb_mem;
+/delete-node/ &pil_gdsp0_mem;
+/delete-node/ &pil_gdsp1_mem;
+/delete-node/ &q6_gdsp1_dtb_mem;
+/delete-node/ &q6_cdsp0_dtb_mem;
+/delete-node/ &pil_cdsp0_mem;
+/delete-node/ &pil_gpu_mem;
+/delete-node/ &pil_cdsp1_mem;
+/delete-node/ &q6_cdsp1_dtb_mem;
+/delete-node/ &pil_cvp_mem;
+/delete-node/ &pil_video_mem;
+/delete-node/ &gunyah_md_mem;
+
+/ {
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_ffi_mem: tz-ffi@91c00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x91c00000 0x0 0x1400000>;
+			no-map;
+		};
+
+		pil_camera_mem: pil-camera@95200000 {
+			reg = <0x0 0x95200000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@95c00000 {
+			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp0_mem: pil-gdsp0@97b00000 {
+			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp1_mem: pil-gdsp1@99900000 {
+			reg = <0x0 0x99900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cdsp0_mem: pil-cdsp0@9b800000 {
+			reg = <0x0 0x9b800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gpu_mem: pil-gpu@9d600000 {
+			reg = <0x0 0x9d600000 0x0 0x2000>;
+			no-map;
+		};
+
+		pil_cdsp1_mem: pil-cdsp1@9d700000 {
+			reg = <0x0 0x9d700000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cvp_mem: pil-cvp@9f500000 {
+			reg = <0x0 0x9f500000 0x0 0x700000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@9fc00000 {
+			reg = <0x0 0x9fc00000 0x0 0x700000>;
+			no-map;
+		};
+
+		audio_mdf_mem: audio-mdf-region@ae000000 {
+			reg = <0x0 0xae000000 0x0 0x1000000>;
+			no-map;
+		};
+
+		hyptz_reserved_mem: hyptz-reserved@beb00000 {
+			reg = <0x0 0xbeb00000 0x0 0x11500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@d1900000 {
+			reg = <0x0 0xd1900000 0x0 0x3800000>;
+			no-map;
+		};
+	};
+
+	firmware {
+		scm {
+			memory-region = <&tz_ffi_mem>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso
new file mode 100644
index 000000000000..769befadd4e4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	vreg_cam1_1p8: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_cam1";
+		startup-delay-us = <10000>;
+		enable-active-high;
+		gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&camss {
+	vdda-pll-supply = <&vreg_l1c>;
+	vdda-phy-supply = <&vreg_l4a>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			csiphy1_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep1>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	pinctrl-0 = <&cci1_0_default>;
+	pinctrl-1 = <&cci1_0_sleep>;
+
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&cam1_default>;
+		pinctrl-names = "default";
+
+		clocks = <&camcc CAM_CC_MCLK1_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply = <&vreg_s4a>;
+		avdd-supply = <&vreg_cam1_1p8>;
+
+		port {
+			imx577_ep1: endpoint {
+				clock-lanes = <7>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy1_ep>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	cam1_default: cam1-default-state {
+		mclk-pins {
+			pins = "gpio73";
+			function = "cam_mclk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rst-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso
new file mode 100644
index 000000000000..4600d5441cce
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/*
+ * Camera Sensor overlay on top of leman evk core kit.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	vreg_cam1_1p8: vreg_cam1_1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_cam1_1p8";
+		startup-delay-us = <10000>;
+		enable-active-high;
+		gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&camcc {
+	status = "okay";
+};
+
+&camss {
+	vdda-pll-supply = <&vreg_l1c>;
+	vdda-phy-supply = <&vreg_l4a>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			csiphy1_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep1>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	pinctrl-0 = <&cci1_0_default>;
+	pinctrl-1 = <&cci1_0_sleep>;
+
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&cam1_default>;
+		pinctrl-names = "default";
+
+		clocks = <&camcc CAM_CC_MCLK1_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply = <&vreg_s4a>;
+		avdd-supply = <&vreg_cam1_1p8>;
+
+		port {
+			imx577_ep1: endpoint {
+				clock-lanes = <7>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy1_ep>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	cam1_default: cam1-default-state {
+		mclk-pins {
+			pins = "gpio73";
+			function = "cam_mclk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rst-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
new file mode 100644
index 000000000000..b40fa203e4a2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -0,0 +1,804 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024-2025, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Lemans EVK";
+	compatible = "qcom,lemans-evk", "qcom,qcs9100", "qcom,sa8775p";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc1 = &sdhc;
+		serial0 = &uart10;
+	};
+
+	dmic: audio-codec-0 {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <1>;
+	};
+
+	max98357a: audio-codec-1 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	edp0-connector {
+		compatible = "dp-connector";
+		label = "EDP0";
+		type = "mini";
+
+		port {
+			edp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp0_out>;
+			};
+		};
+	};
+
+	edp1-connector {
+		compatible = "dp-connector";
+		label = "EDP1";
+		type = "mini";
+
+		port {
+			edp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp1_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,qcs9100-sndcard";
+		model = "LEMANS-EVK";
+
+		pinctrl-0 = <&hs0_mi2s_active>, <&hs2_mi2s_active>;
+		pinctrl-names = "default";
+
+		hs0-mi2s-playback-dai-link {
+			link-name = "HS0 MI2S Playback";
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		hs2-mi2s-capture-dai-link {
+			link-name = "HS2 MI2S Capture";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TERTIARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vmmc_sdc: regulator-vmmc-sdc {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vmmc_sdc";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+	};
+
+	vreg_sdc: regulator-vreg-sdc {
+		compatible = "regulator-gpio";
+
+		regulator-name = "vreg_sdc";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpios = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		states = <1800000 1>, <2950000 0>;
+
+		startup-delay-us = <100>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1816000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1996000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e: smps4 {
+			regulator-name = "vreg_s4e";
+			regulator-min-microvolt = <970000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7e: smps7 {
+			regulator-name = "vreg_s7e";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9e: smps9 {
+			regulator-name = "vreg_s9e";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <570000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&hsgmii_phy0>;
+	phy-mode = "2500base-x";
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	nvmem-cells = <&mac_addr0>;
+	nvmem-cell-names = "mac-address";
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy0: ethernet-phy@1c {
+			compatible = "ethernet-phy-id004d.d101";
+			reg = <0x1c>;
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c18 {
+	status = "okay";
+
+	expander0: gpio@38 {
+		compatible = "ti,tca9538";
+		reg = <0x38>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander1: gpio@39 {
+		compatible = "ti,tca9538";
+		reg = <0x39>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander2: gpio@3a {
+		compatible = "ti,tca9538";
+		reg = <0x3a>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander3: gpio@3b {
+		compatible = "ti,tca9538";
+		reg = <0x3b>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	eeprom@50 {
+		compatible = "giantec,gt24c256c", "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_addr0: mac-addr@0 {
+				reg = <0x0 0x6>;
+			};
+		};
+	};
+};
+
+&i2c19 {
+	status = "okay";
+
+	fan_controller: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#pwm-cells = <2>;
+
+		fan {
+			pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+		};
+	};
+};
+
+&iris {
+	firmware-name = "qcom/vpu/vpu30_p4_s6_16mb.mbn";
+
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	pinctrl-0 = <&dp0_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp0_connector_in>;
+};
+
+&mdss0_dp0_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss0_dp1 {
+	pinctrl-0 = <&dp1_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp1_connector_in>;
+};
+
+&mdss0_dp1_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qup_i2c19_default {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qupv3_id_0 {
+	firmware-name = "qcom/sa8775p/qupv3fw.elf";
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	firmware-name = "qcom/sa8775p/qupv3fw.elf";
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	firmware-name = "qcom/sa8775p/qupv3fw.elf";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sa8775p/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp0 {
+	firmware-name = "qcom/sa8775p/cdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp1 {
+	firmware-name = "qcom/sa8775p/cdsp1.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+	firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+	firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+
+	status = "okay";
+};
+
+&sdhc {
+	vmmc-supply = <&vmmc_sdc>;
+	vqmmc-supply = <&vreg_sdc>;
+
+	pinctrl-0 = <&sdc_default>, <&sd_cd>;
+	pinctrl-1 = <&sdc_sleep>, <&sd_cd>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32768>;
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		clkreq-pins {
+			pins = "gpio3";
+			function = "pcie1_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio5";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	sd_cd: sd-cd-state {
+		pins = "gpio36";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart10 {
+	compatible = "qcom,geni-debug-uart";
+	pinctrl-0 = <&qup_uart10_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi
index 1369c3d43f86..341119fc8244 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi
@@ -132,6 +132,15 @@
 			};
 		};
 
+		pmm8654au_0_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>,
+			      <0x6200>;
+			reg-names = "rtc",
+				    "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		pmm8654au_0_gpios: gpio@8800 {
 			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
index 3fc62e123689..c69aa2f41ce2 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -3,18 +3,11 @@
  * Copyright (c) 2023, Linaro Limited
  */
 
-/dts-v1/;
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
-#include "sa8775p.dtsi"
-#include "sa8775p-pmics.dtsi"
-
 / {
 	aliases {
-		ethernet0 = &ethernet0;
-		ethernet1 = &ethernet1;
 		i2c11 = &i2c11;
 		i2c18 = &i2c18;
 		serial0 = &uart10;
@@ -28,6 +21,64 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	vreg_12p0: vreg-12p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_12P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vreg_5p0: vreg-5p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_5P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vreg_12p0>;
+	};
+
+	vreg_1p8: vreg-1p8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_1P8";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vreg_5p0>;
+	};
+
+	vreg_1p0: vreg-1p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_1P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+
+		vin-supply = <&vreg_1p8>;
+	};
+
+	vreg_3p0: vreg-3p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_3P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		vin-supply = <&vreg_12p0>;
+	};
+
 	vreg_conn_1p8: vreg_conn_1p8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vreg_conn_1p8";
@@ -104,6 +155,54 @@
 			};
 		};
 	};
+
+	dp0-connector {
+		compatible = "dp-connector";
+		label = "eDP0";
+		type = "full-size";
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp0_out>;
+			};
+		};
+	};
+
+	dp1-connector {
+		compatible = "dp-connector";
+		label = "eDP1";
+		type = "full-size";
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp1_out>;
+			};
+		};
+	};
+
+	dp-dsi0-connector {
+		compatible = "dp-connector";
+		label = "DSI0";
+		type = "full-size";
+
+		port {
+			dp_dsi0_connector_in: endpoint {
+				remote-endpoint = <&dsi2dp_bridge0_out>;
+			};
+		};
+	};
+
+	dp-dsi1-connector {
+		compatible = "dp-connector";
+		label = "DSI1";
+		type = "full-size";
+
+		port {
+			dp_dsi1_connector_in: endpoint {
+				remote-endpoint = <&dsi2dp_bridge1_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -337,164 +436,198 @@
 	};
 };
 
-&ethernet0 {
-	phy-handle = <&sgmii_phy0>;
-
-	pinctrl-0 = <&ethernet0_default>;
-	pinctrl-names = "default";
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
 
-	snps,mtl-rx-config = <&mtl_rx_setup>;
-	snps,mtl-tx-config = <&mtl_tx_setup>;
-	snps,ps-speed = <1000>;
+&i2c18 {
+	clock-frequency = <400000>;
 
 	status = "okay";
 
-	mdio: mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	io_expander: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		interrupts-extended = <&tlmm 98 IRQ_TYPE_EDGE_BOTH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&io_expander_intr_active>,
+			    <&io_expander_reset_active>;
+		pinctrl-names = "default";
 	};
 
-	mtl_rx_setup: rx-queues-config {
-		snps,rx-queues-to-use = <4>;
-		snps,rx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x0>;
-			snps,route-up;
-			snps,priority = <0x1>;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x1>;
-			snps,route-ptp;
-		};
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
 
-		queue2 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x2>;
-			snps,route-avcp;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			bridge@58 {
+				compatible = "analogix,anx7625";
+				reg = <0x58>;
+				interrupts-extended = <&io_expander 2 IRQ_TYPE_EDGE_FALLING>;
+				enable-gpios = <&io_expander 1 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
+				vdd10-supply = <&vreg_1p0>;
+				vdd18-supply = <&vreg_1p8>;
+				vdd33-supply = <&vreg_3p0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsi2dp_bridge0_in: endpoint {
+							remote-endpoint = <&mdss0_dsi0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dsi2dp_bridge0_out: endpoint {
+							remote-endpoint = <&dp_dsi0_connector_in>;
+						};
+					};
+				};
+			};
 		};
 
-		queue3 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x3>;
-			snps,priority = <0xc>;
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			bridge@58 {
+				compatible = "analogix,anx7625";
+				reg = <0x58>;
+				interrupts-extended = <&io_expander 10 IRQ_TYPE_EDGE_FALLING>;
+				enable-gpios = <&io_expander 9 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&io_expander 8 GPIO_ACTIVE_HIGH>;
+				vdd10-supply = <&vreg_1p0>;
+				vdd18-supply = <&vreg_1p8>;
+				vdd33-supply = <&vreg_3p0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsi2dp_bridge1_in: endpoint {
+							remote-endpoint = <&mdss0_dsi1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dsi2dp_bridge1_out: endpoint {
+							remote-endpoint = <&dp_dsi1_connector_in>;
+						};
+					};
+				};
+			};
 		};
 	};
 
-	mtl_tx_setup: tx-queues-config {
-		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
+};
 
-		queue0 {
-			snps,dcb-algorithm;
-		};
+&iris {
+	firmware-name = "qcom/vpu/vpu30_p4_s6.mbn";
 
-		queue1 {
-			snps,dcb-algorithm;
-		};
+	status = "okay";
+};
 
-		queue2 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
+&mdss0 {
+	status = "okay";
+};
 
-		queue3 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-	};
+&mdss0_dp0 {
+	pinctrl-0 = <&dp0_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
 };
 
-&ethernet1 {
-	phy-handle = <&sgmii_phy1>;
+&mdss0_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp0_connector_in>;
+};
 
-	snps,mtl-rx-config = <&mtl_rx_setup1>;
-	snps,mtl-tx-config = <&mtl_tx_setup1>;
-	snps,ps-speed = <1000>;
+&mdss0_dp0_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
 
 	status = "okay";
+};
 
-	mtl_rx_setup1: rx-queues-config {
-		snps,rx-queues-to-use = <4>;
-		snps,rx-sched-sp;
+&mdss0_dp1 {
+	pinctrl-0 = <&dp1_hot_plug_det>;
+	pinctrl-names = "default";
 
-		queue0 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x0>;
-			snps,route-up;
-			snps,priority = <0x1>;
-		};
+	status = "okay";
+};
 
-		queue1 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x1>;
-			snps,route-ptp;
-		};
+&mdss0_dp1_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&dp1_connector_in>;
+};
 
-		queue2 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x2>;
-			snps,route-avcp;
-		};
+&mdss0_dp1_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
 
-		queue3 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x3>;
-			snps,priority = <0xc>;
-		};
-	};
+	status = "okay";
+};
 
-	mtl_tx_setup1: tx-queues-config {
-		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
+&mdss0_dsi0 {
+	vdda-supply = <&vreg_l1c>;
 
-		queue0 {
-			snps,dcb-algorithm;
-		};
+	status = "okay";
+};
 
-		queue1 {
-			snps,dcb-algorithm;
-		};
+&mdss0_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&dsi2dp_bridge0_in>;
+};
 
-		queue2 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
+&mdss0_dsi0_phy {
+	vdds-supply = <&vreg_l4a>;
 
-		queue3 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-	};
+	status = "okay";
 };
 
-&i2c11 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&qup_i2c11_default>;
-	pinctrl-names = "default";
+&mdss0_dsi1 {
+	vdda-supply = <&vreg_l1c>;
+
 	status = "okay";
 };
 
-&i2c18 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&qup_i2c18_default>;
-	pinctrl-names = "default";
+&mdss0_dsi1_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&dsi2dp_bridge1_in>;
+};
+
+&mdss0_dsi1_phy {
+	vdds-supply = <&vreg_l4a>;
+
 	status = "okay";
 };
 
@@ -597,6 +730,53 @@
 	status = "okay";
 };
 
+&qup_spi16_default {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c18_default {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart12_cts {
+	bias-disable;
+};
+
+&qup_uart12_rts {
+	bias-pull-down;
+};
+
+&qup_uart12_tx {
+	bias-pull-up;
+};
+
+&qup_uart12_rx {
+	bias-pull-down;
+};
+
+&qup_uart17_cts {
+	bias-disable;
+};
+
+&qup_uart17_rts {
+	bias-pull-down;
+};
+
+&qup_uart17_tx {
+	bias-pull-up;
+};
+
+&qup_uart17_rx {
+	bias-pull-down;
+};
+
 &serdes0 {
 	phy-supply = <&vreg_l5a>;
 	status = "okay";
@@ -608,108 +788,39 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32764>;
+	clock-frequency = <32000>;
 };
 
 &spi16 {
-	pinctrl-0 = <&qup_spi16_default>;
-	pinctrl-names = "default";
 	status = "okay";
 };
 
 &tlmm {
-	ethernet0_default: ethernet0-default-state {
-		ethernet0_mdc: ethernet0-mdc-pins {
-			pins = "gpio8";
-			function = "emac0_mdc";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-
-		ethernet0_mdio: ethernet0-mdio-pins {
-			pins = "gpio9";
-			function = "emac0_mdio";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-	};
-
-	qup_uart10_default: qup-uart10-state {
-		pins = "gpio46", "gpio47";
-		function = "qup1_se3";
+	dp0_hot_plug_det: dp0-hot-plug-det-state {
+		pins = "gpio101";
+		function = "edp0_hot";
+		bias-disable;
 	};
 
-	qup_spi16_default: qup-spi16-state {
-		pins = "gpio86", "gpio87", "gpio88", "gpio89";
-		function = "qup2_se2";
-		drive-strength = <6>;
+	dp1_hot_plug_det: dp1-hot-plug-det-state {
+		pins = "gpio102";
+		function = "edp1_hot";
 		bias-disable;
 	};
 
-	qup_i2c11_default: qup-i2c11-state {
-		pins = "gpio48", "gpio49";
-		function = "qup1_se4";
+	io_expander_intr_active: io-expander-intr-active-state {
+		pins = "gpio98";
+		function = "gpio";
 		drive-strength = <2>;
-		bias-pull-up;
+		bias-disable;
 	};
 
-	qup_i2c18_default: qup-i2c18-state {
-		pins = "gpio95", "gpio96";
-		function = "qup2_se4";
+	io_expander_reset_active: io-expander-reset-active-state {
+		pins = "gpio97";
+		function = "gpio";
 		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qup_uart12_default: qup-uart12-state {
-		qup_uart12_cts: qup-uart12-cts-pins {
-			pins = "gpio52";
-			function = "qup1_se5";
-			bias-disable;
-		};
-
-		qup_uart12_rts: qup-uart12-rts-pins {
-			pins = "gpio53";
-			function = "qup1_se5";
-			bias-pull-down;
-		};
-
-		qup_uart12_tx: qup-uart12-tx-pins {
-			pins = "gpio54";
-			function = "qup1_se5";
-			bias-pull-up;
-		};
-
-		qup_uart12_rx: qup-uart12-rx-pins {
-			pins = "gpio55";
-			function = "qup1_se5";
-			bias-pull-down;
-		};
-	};
-
-	qup_uart17_default: qup-uart17-state {
-		qup_uart17_cts: qup-uart17-cts-pins {
-			pins = "gpio91";
-			function = "qup2_se3";
-			bias-disable;
-		};
-
-		qup_uart17_rts: qup0-uart17-rts-pins {
-			pins = "gpio92";
-			function = "qup2_se3";
-			bias-pull-down;
-		};
-
-		qup_uart17_tx: qup0-uart17-tx-pins {
-			pins = "gpio93";
-			function = "qup2_se3";
-			bias-pull-up;
-		};
-
-		qup_uart17_rx: qup0-uart17-rx-pins {
-			pins = "gpio94";
-			function = "qup2_se3";
-			bias-pull-down;
-		};
+		bias-disable;
+		output-high;
 	};
 
 	pcie0_default_state: pcie0-default-state {
@@ -798,7 +909,7 @@
 		compatible = "pci17cb,1101";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 
-		qcom,ath11k-calibration-variant = "QC_SA8775P_Ride";
+		qcom,calibration-variant = "QC_SA8775P_Ride";
 
 		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
 		vddaon-supply = <&vreg_pmu_aon_0p59>;
@@ -839,8 +950,6 @@
 
 &uart10 {
 	compatible = "qcom,geni-debug-uart";
-	pinctrl-0 = <&qup_uart10_default>;
-	pinctrl-names = "default";
 	status = "okay";
 };
 
@@ -857,6 +966,7 @@
 
 	bluetooth {
 		compatible = "qcom,wcn6855-bt";
+		firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
 
 		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
 		vddaon-supply = <&vreg_pmu_aon_0p59>;
@@ -887,14 +997,11 @@
 &usb_0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_en_state>;
+	dr_mode = "peripheral";
 
 	status = "okay";
 };
 
-&usb_0_dwc3 {
-	dr_mode = "peripheral";
-};
-
 &usb_0_hsphy {
 	vdda-pll-supply = <&vreg_l7a>;
 	vdda18-supply = <&vreg_l6c>;
@@ -913,14 +1020,11 @@
 &usb_1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_en_state>;
+	dr_mode = "host";
 
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "host";
-};
-
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l7a>;
 	vdda18-supply = <&vreg_l6c>;
@@ -939,14 +1043,11 @@
 &usb_2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb2_en_state>;
+	dr_mode = "host";
 
 	status = "okay";
 };
 
-&usb_2_dwc3 {
-	dr_mode = "host";
-};
-
 &usb_2_hsphy {
 	vdda-pll-supply = <&vreg_l7a>;
 	vdda18-supply = <&vreg_l6c>;
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi
new file mode 100644
index 000000000000..9d6bbe1447a4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/*
+ * Ethernet card for Lemans based Ride boards.
+ * It supports 2x 1G - SGMII (Marvell 88EA1512-B2) phy for Main domain
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+	};
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&sgmii_phy0>;
+	phy-mode = "sgmii";
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sgmii_phy0: phy@8 {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+
+		sgmii_phy1: phy@a {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0xa>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-handle = <&sgmii_phy1>;
+	phy-mode = "sgmii";
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi
new file mode 100644
index 000000000000..2d2d9ee5f0d9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/*
+ * Ethernet card for Lemans based Ride r3 boards.
+ * It supports 2x 2.5G - HSGMII (Marvell hsgmii) phy for Main domain
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+	};
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&hsgmii_phy0>;
+	phy-mode = "2500base-x";
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy0: phy@8 {
+			compatible = "ethernet-phy-id31c3.1c33";
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+
+		hsgmii_phy1: phy@0 {
+			compatible = "ethernet-phy-id31c3.1c33";
+			reg = <0x0>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-handle = <&hsgmii_phy1>;
+	phy-mode = "2500base-x";
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 9f315a51a7c1..0b154d57ba24 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -6,15 +6,20 @@
 
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
 #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
 #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
+#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/firmware/qcom,scm.h>
-#include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -44,10 +49,17 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
 			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -66,10 +78,17 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_1>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
 			l2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -83,10 +102,17 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_2>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
 			l2_2: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -100,10 +126,17 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_3>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
 			l2_3: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -117,10 +150,17 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x10000>;
 			enable-method = "psci";
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			next-level-cache = <&l2_4>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
 			l2_4: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -140,10 +180,17 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x10100>;
 			enable-method = "psci";
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			next-level-cache = <&l2_5>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
 			l2_5: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -157,10 +204,17 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x10200>;
 			enable-method = "psci";
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			next-level-cache = <&l2_6>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
 			l2_6: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -174,10 +228,17 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x10300>;
 			enable-method = "psci";
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			next-level-cache = <&l2_7>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
 			l2_7: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -267,6 +328,176 @@
 		};
 	};
 
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1939200000 {
+			opp-hz = /bits/ 64 <1939200000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2265600000 {
+			opp-hz = /bits/ 64 <2265600000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+		};
+
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1939200000 {
+			opp-hz = /bits/ 64 <1939200000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+		};
+
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2265600000 {
+			opp-hz = /bits/ 64 <2265600000>;
+			opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>;
+		};
+	};
+
 	dummy-sink {
 		compatible = "arm,coresight-dummy-sink";
 
@@ -284,7 +515,6 @@
 		scm {
 			compatible = "qcom,scm-sa8775p", "qcom,scm";
 			qcom,dload-mode = <&tcsr 0x13000>;
-			memory-region = <&tz_ffi_mem>;
 		};
 	};
 
@@ -454,17 +684,17 @@
 
 		cluster_0_pd: power-domain-cluster0 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_2_pd>;
 			domain-idle-states = <&cluster_sleep_gold>;
+			power-domains = <&system_pd>;
 		};
 
 		cluster_1_pd: power-domain-cluster1 {
 			#power-domain-cells = <0>;
-			power-domains = <&cluster_2_pd>;
 			domain-idle-states = <&cluster_sleep_gold>;
+			power-domains = <&system_pd>;
 		};
 
-		cluster_2_pd: power-domain-cluster2 {
+		system_pd: power-domain-system {
 			#power-domain-cells = <0>;
 			domain-idle-states = <&cluster_sleep_apss_rsc_pc>;
 		};
@@ -543,6 +773,11 @@
 			no-map;
 		};
 
+		gunyah_md_mem: gunyah-md@91a80000 {
+			reg = <0x0 0x91a80000 0x0 0x80000>;
+			no-map;
+		};
+
 		aoss_backup_mem: aoss-backup@91b00000 {
 			reg = <0x0 0x91b00000 0x0 0x40000>;
 			no-map;
@@ -568,12 +803,6 @@
 			no-map;
 		};
 
-		tz_ffi_mem: tz-ffi@91c00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x91c00000 0x0 0x1400000>;
-			no-map;
-		};
-
 		lpass_machine_learning_mem: lpass-machine-learning@93b00000 {
 			reg = <0x0 0x93b00000 0x0 0xf00000>;
 			no-map;
@@ -585,62 +814,77 @@
 		};
 
 		pil_camera_mem: pil-camera@95200000 {
-			reg = <0x0 0x95200000 0x0 0x500000>;
+			reg = <0x0 0x95200000 0x0 0x700000>;
 			no-map;
 		};
 
-		pil_adsp_mem: pil-adsp@95c00000 {
-			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+		pil_adsp_mem: pil-adsp@95900000 {
+			reg = <0x0 0x95900000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		pil_gdsp0_mem: pil-gdsp0@97b00000 {
-			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+		q6_adsp_dtb_mem: q6-adsp-dtb@97700000 {
+			reg = <0x0 0x97700000 0x0 0x80000>;
 			no-map;
 		};
 
-		pil_gdsp1_mem: pil-gdsp1@99900000 {
-			reg = <0x0 0x99900000 0x0 0x1e00000>;
+		q6_gdsp0_dtb_mem: q6-gdsp0-dtb@97780000 {
+			reg = <0x0 0x97780000 0x0 0x80000>;
 			no-map;
 		};
 
-		pil_cdsp0_mem: pil-cdsp0@9b800000 {
-			reg = <0x0 0x9b800000 0x0 0x1e00000>;
+		pil_gdsp0_mem: pil-gdsp0@97800000 {
+			reg = <0x0 0x97800000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		pil_gpu_mem: pil-gpu@9d600000 {
-			reg = <0x0 0x9d600000 0x0 0x2000>;
+		pil_gdsp1_mem: pil-gdsp1@99600000 {
+			reg = <0x0 0x99600000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		pil_cdsp1_mem: pil-cdsp1@9d700000 {
-			reg = <0x0 0x9d700000 0x0 0x1e00000>;
+		q6_gdsp1_dtb_mem: q6-gdsp1-dtb@9b400000 {
+			reg = <0x0 0x9b400000 0x0 0x80000>;
 			no-map;
 		};
 
-		pil_cvp_mem: pil-cvp@9f500000 {
-			reg = <0x0 0x9f500000 0x0 0x700000>;
+		q6_cdsp0_dtb_mem: q6-cdsp0-dtb@9b480000 {
+			reg = <0x0 0x9b480000 0x0 0x80000>;
 			no-map;
 		};
 
-		pil_video_mem: pil-video@9fc00000 {
-			reg = <0x0 0x9fc00000 0x0 0x700000>;
+		pil_cdsp0_mem: pil-cdsp0@9b500000 {
+			reg = <0x0 0x9b500000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		audio_mdf_mem: audio-mdf-region@ae000000 {
-			reg = <0x0 0xae000000 0x0 0x1000000>;
+		pil_gpu_mem: pil-gpu@9d300000 {
+			reg = <0x0 0x9d300000 0x0 0x2000>;
 			no-map;
 		};
 
-		firmware_mem: firmware-region@b0000000 {
-			reg = <0x0 0xb0000000 0x0 0x800000>;
+		q6_cdsp1_dtb_mem: q6-cdsp1-dtb@9d380000 {
+			reg = <0x0 0x9d380000 0x0 0x80000>;
 			no-map;
 		};
 
-		hyptz_reserved_mem: hyptz-reserved@beb00000 {
-			reg = <0x0 0xbeb00000 0x0 0x11500000>;
+		pil_cdsp1_mem: pil-cdsp1@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cvp_mem: pil-cvp@9f200000 {
+			reg = <0x0 0x9f200000 0x0 0x700000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@9f900000 {
+			reg = <0x0 0x9f900000 0x0 0x1000000>;
+			no-map;
+		};
+
+		firmware_mem: firmware-region@b0000000 {
+			reg = <0x0 0xb0000000 0x0 0x800000>;
 			no-map;
 		};
 
@@ -685,7 +929,7 @@
 		};
 
 		trusted_apps_mem: trusted-apps@d1900000 {
-			reg = <0x0 0xd1900000 0x0 0x3800000>;
+			reg = <0x0 0xd1900000 0x0 0x1c00000>;
 			no-map;
 		};
 
@@ -854,8 +1098,8 @@
 			#mbox-cells = <2>;
 		};
 
-		gpi_dma2: qcom,gpi-dma@800000  {
-			compatible = "qcom,sm6350-gpi-dma";
+		gpi_dma2: dma-controller@800000  {
+			compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x00800000 0x0 0x60000>;
 			#dma-cells = <3>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
@@ -896,6 +1140,8 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c14_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -921,6 +1167,8 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi14_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -944,6 +1192,8 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart14_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -961,6 +1211,8 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c15_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -986,6 +1238,8 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi15_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1009,6 +1263,8 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart15_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1026,6 +1282,8 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c16_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1049,6 +1307,8 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi16_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1074,6 +1334,8 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart16_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1091,6 +1353,8 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c17_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1116,6 +1380,8 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi17_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1139,6 +1405,8 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart17_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1154,6 +1422,8 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c18_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1181,6 +1451,8 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi18_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1204,6 +1476,8 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart18_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1221,6 +1495,8 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c19_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1246,6 +1522,8 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi19_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1269,6 +1547,8 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart19_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1286,6 +1566,8 @@
 				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c20_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1311,6 +1593,8 @@
 				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi20_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1334,6 +1618,8 @@
 				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart20_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1345,8 +1631,8 @@
 
 		};
 
-		gpi_dma0: qcom,gpi-dma@900000  {
-			compatible = "qcom,sm6350-gpi-dma";
+		gpi_dma0: dma-controller@900000  {
+			compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x00900000 0x0 0x60000>;
 			#dma-cells = <3>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
@@ -1387,6 +1673,8 @@
 				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c0_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1412,6 +1700,8 @@
 				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1435,6 +1725,8 @@
 				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1452,6 +1744,8 @@
 				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1477,6 +1771,8 @@
 				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1500,6 +1796,8 @@
 				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart1_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1517,6 +1815,8 @@
 				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1542,6 +1842,8 @@
 				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1565,6 +1867,8 @@
 				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart2_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1582,6 +1886,8 @@
 				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1607,6 +1913,8 @@
 				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1630,6 +1938,8 @@
 				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart3_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1647,6 +1957,8 @@
 				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1672,6 +1984,8 @@
 				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi4_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1695,6 +2009,8 @@
 				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1712,6 +2028,8 @@
 				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1737,6 +2055,8 @@
 				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1760,6 +2080,8 @@
 				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart5_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1770,8 +2092,8 @@
 			};
 		};
 
-		gpi_dma1: qcom,gpi-dma@a00000  {
-			compatible = "qcom,sm6350-gpi-dma";
+		gpi_dma1: dma-controller@a00000  {
+			compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x00a00000 0x0 0x60000>;
 			#dma-cells = <3>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
@@ -1812,6 +2134,8 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c7_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1837,6 +2161,8 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi7_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1860,6 +2186,8 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-0 = <&qup_uart7_default>;
+				pinctrl-names = "default";
 				interconnect-names = "qup-core", "qup-config";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -1878,6 +2206,8 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c8_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1903,6 +2233,8 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi8_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1926,6 +2258,8 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-0 = <&qup_uart8_default>;
+				pinctrl-names = "default";
 				interconnect-names = "qup-core", "qup-config";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -1944,6 +2278,8 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c9_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1969,6 +2305,8 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi9_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1992,6 +2330,8 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart9_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2009,6 +2349,8 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c10_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2034,6 +2376,8 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi10_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2057,6 +2401,8 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-0 = <&qup_uart10_default>;
+				pinctrl-names = "default";
 				interconnect-names = "qup-core", "qup-config";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 0
 						 &clk_virt SLAVE_QUP_CORE_1 0>,
@@ -2075,6 +2421,8 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c11_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2100,6 +2448,8 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi11_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2123,6 +2473,8 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-0 = <&qup_uart11_default>;
+				pinctrl-names = "default";
 				interconnect-names = "qup-core", "qup-config";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -2141,6 +2493,8 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c12_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2166,6 +2520,8 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi12_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2189,6 +2545,8 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_uart12_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2206,6 +2564,8 @@
 				interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c13_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2225,8 +2585,8 @@
 			};
 		};
 
-		gpi_dma3: qcom,gpi-dma@b00000  {
-			compatible = "qcom,sm6350-gpi-dma";
+		gpi_dma3: dma-controller@b00000  {
+			compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x00b00000 0x0 0x58000>;
 			#dma-cells = <3>;
 			interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
@@ -2259,6 +2619,8 @@
 				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_i2c21_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
 						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
 					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2284,6 +2646,8 @@
 				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
 				clock-names = "se";
+				pinctrl-0 = <&qup_spi21_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
 						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
 					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2308,6 +2672,8 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
 				interconnect-names = "qup-core", "qup-config";
+				pinctrl-0 = <&qup_uart21_default>;
+				pinctrl-names = "default";
 				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -2396,20 +2762,40 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x480 0x00>,
 				 <&apps_smmu 0x481 0x00>;
 		};
 
-		crypto: crypto@1dfa000 {
-			compatible = "qcom,sa8775p-qce", "qcom,qce";
-			reg = <0x0 0x01dfa000 0x0 0x6000>;
-			dmas = <&cryptobam 4>, <&cryptobam 5>;
-			dma-names = "rx", "tx";
-			iommus = <&apps_smmu 0x480 0x00>,
-				 <&apps_smmu 0x481 0x00>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "memory";
+		ctcu@4001000 {
+			compatible = "qcom,sa8775p-ctcu";
+			reg = <0x0 0x04001000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ctcu_in0: endpoint {
+						remote-endpoint = <&etr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ctcu_in1: endpoint {
+						remote-endpoint = <&etr1_out>;
+					};
+				};
+			};
 		};
 
 		stm: stm@4002000 {
@@ -2440,6 +2826,7 @@
 
 			qcom,cmb-element-bits = <32>;
 			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
 
 			out-ports {
 				port {
@@ -2615,6 +3002,122 @@
 			};
 		};
 
+		replicator@4046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x04046000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					qdss_rep_in: endpoint {
+						remote-endpoint = <&swao_rep_out0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_rep_out0: endpoint {
+						remote-endpoint = <&etr_rep_in>;
+					};
+				};
+			};
+		};
+
+		tmc_etr: tmc@4048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x04048000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			iommus = <&apps_smmu 0x04c0 0x00>;
+
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr0_in: endpoint {
+						remote-endpoint = <&etr_rep_out0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etr0_out: endpoint {
+						remote-endpoint = <&ctcu_in0>;
+					};
+				};
+			};
+		};
+
+		replicator@404e000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x0404e000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_rep_in: endpoint {
+						remote-endpoint = <&qdss_rep_out0>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					etr_rep_out0: endpoint {
+						remote-endpoint = <&etr0_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					etr_rep_out1: endpoint {
+						remote-endpoint = <&etr1_in>;
+					};
+				};
+			};
+		};
+
+		tmc_etr1: tmc@404f000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x0404f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			iommus = <&apps_smmu 0x04a0 0x40>;
+
+			arm,scatter-gather;
+			arm,buffer-size = <0x400000>;
+
+			in-ports {
+				port {
+					etr1_in: endpoint {
+						remote-endpoint = <&etr_rep_out1>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etr1_out: endpoint {
+						remote-endpoint = <&ctcu_in1>;
+					};
+				};
+			};
+		};
+
 		funnel@4b04000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x0 0x4b04000 0x0 0x1000>;
@@ -2690,6 +3193,14 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+
+					swao_rep_out0: endpoint {
+						remote-endpoint = <&qdss_rep_in>;
+					};
+				};
+
 				port@1 {
 					reg = <1>;
 					swao_rep_out1: endpoint {
@@ -3325,6 +3836,58 @@
 			};
 		};
 
+		sdhc: mmc@87c4000 {
+			compatible = "qcom,sa8775p-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x087c4000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>;
+			clock-names = "iface",
+				      "core";
+
+			interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			iommus = <&apps_smmu 0x0 0x0>;
+			dma-coherent;
+
+			operating-points-v2 = <&sdhc_opp_table>;
+			power-domains = <&rpmhpd SA8775P_CX>;
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			status = "disabled";
+
+			sdhc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 400000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <390000 0>;
+				};
+			};
+		};
+
 		usb_0_hsphy: phy@88e4000 {
 			compatible = "qcom,sa8775p-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
@@ -3338,6 +3901,32 @@
 			status = "disabled";
 		};
 
+		usb_1_hsphy: phy@88e6000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e6000 0 0x120>;
+			clocks = <&gcc GCC_USB_CLKREF_EN>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy: phy@88e7000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e7000 0 0x120>;
+			clocks = <&gcc GCC_USB_CLKREF_EN>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB3_PHY_TERT_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		usb_0_qmpphy: phy@88e8000 {
 			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
 			reg = <0 0x088e8000 0 0x2000>;
@@ -3362,12 +3951,39 @@
 			status = "disabled";
 		};
 
-		usb_0: usb@a6f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1_qmpphy: phy@88ea000 {
+			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+			reg = <0 0x088ea000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_sec_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		refgen: regulator@891c000 {
+			compatible = "qcom,sa8775p-refgen-regulator",
+				     "qcom,sm8250-refgen-regulator";
+			reg = <0x0 0x0891c000 0x0 0x84>;
+		};
+
+		usb_0: usb@a600000 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -3380,12 +3996,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3402,61 +4020,18 @@
 
 			wakeup-source;
 
-			status = "disabled";
-
-			usb_0_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xe000>;
-				interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x080 0x0>;
-				phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usb_1_hsphy: phy@88e6000 {
-			compatible = "qcom,sa8775p-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e6000 0 0x120>;
-			clocks = <&gcc GCC_USB_CLKREF_EN>;
-			clock-names = "ref";
-			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_1_qmpphy: phy@88ea000 {
-			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
-			reg = <0 0x088ea000 0 0x2000>;
-
-			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-			clock-names = "aux", "ref", "com_aux", "pipe";
-
-			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
-			reset-names = "phy", "phy_phy";
-
-			power-domains = <&gcc USB30_SEC_GDSC>;
-
-			#clock-cells = <0>;
-			clock-output-names = "usb3_sec_phy_pipe_clk_src";
-
-			#phy-cells = <0>;
+			iommus = <&apps_smmu 0x080 0x0>;
+			phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
+			phy-names = "usb2-phy", "usb3-phy";
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
 
 			status = "disabled";
 		};
 
-		usb_1: usb@a8f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
-			reg = <0 0x0a8f8800 0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1: usb@a800000 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a800000 0 0xfc100>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
 				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
@@ -3469,12 +4044,14 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3491,37 +4068,18 @@
 
 			wakeup-source;
 
-			status = "disabled";
-
-			usb_1_dwc3: usb@a800000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a800000 0 0xe000>;
-				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x0a0 0x0>;
-				phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usb_2_hsphy: phy@88e7000 {
-			compatible = "qcom,sa8775p-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e7000 0 0x120>;
-			clocks = <&gcc GCC_USB_CLKREF_EN>;
-			clock-names = "ref";
-			resets = <&gcc GCC_USB3_PHY_TERT_BCR>;
-
-			#phy-cells = <0>;
+			iommus = <&apps_smmu 0x0a0 0x0>;
+			phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
+			phy-names = "usb2-phy", "usb3-phy";
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
 
 			status = "disabled";
 		};
 
-		usb_2: usb@a4f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
-			reg = <0 0x0a4f8800 0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_2: usb@a400000 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a400000 0 0xfc100>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB20_MASTER_CLK>,
@@ -3534,11 +4092,13 @@
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -3552,18 +4112,16 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
+			qcom,select-utmi-as-pipe-clk;
 			wakeup-source;
 
-			status = "disabled";
+			iommus = <&apps_smmu 0x020 0x0>;
+			phys = <&usb_2_hsphy>;
+			phy-names = "usb2-phy";
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
 
-			usb_2_dwc3: usb@a400000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a400000 0 0xe000>;
-				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x020 0x0>;
-				phys = <&usb_2_hsphy>;
-				phy-names = "usb2-phy";
-			};
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -3759,6 +4317,967 @@
 			interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		iris: video-codec@aa00000 {
+			compatible = "qcom,sa8775p-iris", "qcom,sm8550-iris";
+
+			reg = <0x0 0x0aa00000 0x0 0xf0000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd SA8775P_MX>,
+					<&rpmhpd SA8775P_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&pil_video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+			reset-names = "bus";
+
+			iommus = <&apps_smmu 0x0880 0x0400>,
+				 <&apps_smmu 0x0887 0x0400>;
+			dma-coherent;
+
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-533000000 {
+					opp-hz = /bits/ 64 <533000000>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					required-opps = <&rpmhpd_opp_turbo_l1>,
+							<&rpmhpd_opp_turbo_l1>;
+				};
+			};
+		};
+
+		videocc: clock-controller@abf0000 {
+			compatible = "qcom,sa8775p-videocc";
+			reg = <0x0 0x0abf0000 0x0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SA8775P_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		cci0: cci@ac13000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac13000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac14000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac14000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+			pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac15000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac15000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+			pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci3: cci@ac16000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac16000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_3_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci3_0_default &cci3_1_default>;
+			pinctrl-1 = <&cci3_0_sleep &cci3_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci3_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci3_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: isp@ac78000 {
+			compatible = "qcom,sa8775p-camss";
+
+			reg = <0x0 0xac78000 0x0 0x1000>,
+			      <0x0 0xac7a000 0x0 0x0f00>,
+			      <0x0 0xac7c000 0x0 0x0f00>,
+			      <0x0 0xac84000 0x0 0x0f00>,
+			      <0x0 0xac88000 0x0 0x0f00>,
+			      <0x0 0xac8c000 0x0 0x0f00>,
+			      <0x0 0xac90000 0x0 0x0f00>,
+			      <0x0 0xac94000 0x0 0x0f00>,
+			      <0x0 0xac9c000 0x0 0x2000>,
+			      <0x0 0xac9e000 0x0 0x2000>,
+			      <0x0 0xaca0000 0x0 0x2000>,
+			      <0x0 0xaca2000 0x0 0x2000>,
+			      <0x0 0xacac000 0x0 0x0400>,
+			      <0x0 0xacad000 0x0 0x0400>,
+			      <0x0 0xacae000 0x0 0x0400>,
+			      <0x0 0xac4d000 0x0 0xd000>,
+			      <0x0 0xac5a000 0x0 0xd000>,
+			      <0x0 0xac85000 0x0 0x0d00>,
+			      <0x0 0xac89000 0x0 0x0d00>,
+			      <0x0 0xac8d000 0x0 0x0d00>,
+			      <0x0 0xac91000 0x0 0x0d00>,
+			      <0x0 0xac95000 0x0 0x0d00>;
+			reg-names = "csid_wrapper",
+				    "csid0",
+				    "csid1",
+				    "csid_lite0",
+				    "csid_lite1",
+				    "csid_lite2",
+				    "csid_lite3",
+				    "csid_lite4",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "tpg0",
+				    "tpg1",
+				    "tpg2",
+				    "vfe0",
+				    "vfe1",
+				    "vfe_lite0",
+				    "vfe_lite1",
+				    "vfe_lite2",
+				    "vfe_lite3",
+				    "vfe_lite4";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+				 <&camcc CAM_CC_CSID_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_ICP_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+			clock-names = "camnoc_axi",
+				      "core_ahb",
+				      "cpas_ahb",
+				      "cpas_fast_ahb_clk",
+				      "cpas_vfe_lite",
+				      "cpas_vfe0",
+				      "cpas_vfe1",
+				      "csid",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy_rx",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf",
+				      "icp_ahb",
+				      "vfe0",
+				      "vfe0_fast_ahb",
+				      "vfe1",
+				      "vfe1_fast_ahb",
+				      "vfe_lite",
+				      "vfe_lite_ahb",
+				      "vfe_lite_cphy_rx",
+				      "vfe_lite_csid";
+
+			interrupts = <GIC_SPI 565 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 564 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 545 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 546 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 547 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "csid_lite2",
+					  "csid_lite3",
+					  "csid_lite4",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "tpg0",
+					  "tpg1",
+					  "tpg2",
+					  "vfe0",
+					  "vfe1",
+					  "vfe_lite0",
+					  "vfe_lite1",
+					  "vfe_lite2",
+					  "vfe_lite3",
+					  "vfe_lite4";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ahb",
+					     "hf_0";
+
+			iommus = <&apps_smmu 0x3400 0x20>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+			};
+		};
+
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,sa8775p-camcc";
+			reg = <0x0 0x0ade0000 0x0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SA8775P_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss0: display-subsystem@ae00000 {
+			compatible = "qcom,sa8775p-mdss";
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			/* same path used twice */
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
+
+			resets = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_GDSC>;
+
+			clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x1000 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss0_mdp: display-controller@ae01000 {
+				compatible = "qcom,sa8775p-dpu";
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x3000>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdss0_mdp_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss0_dp0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf4_out: endpoint {
+							remote-endpoint = <&mdss0_dp1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss0_dsi0_in>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss0_dsi1_in>;
+						};
+					};
+				};
+
+				mdss0_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-575000000 {
+						opp-hz = /bits/ 64 <575000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+
+					opp-650000000 {
+						opp-hz = /bits/ 64 <650000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss0_dsi0: dsi@ae94000 {
+				compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <4>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>;
+				phys = <&mdss0_dsi0_phy>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				refgen-supply = <&refgen>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dsi0_out: endpoint{ };
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss0_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,sa8775p-dsi-phy-5nm";
+				reg = <0x0 0x0ae94400 0x0 0x200>,
+				      <0x0 0x0ae94600 0x0 0x280>,
+				      <0x0 0x0ae94900 0x0 0x27c>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss0_dsi1: dsi@ae96000 {
+				compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae96000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <5>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
+				phys = <&mdss0_dsi1_phy>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				refgen-supply = <&refgen>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dsi1_out: endpoint { };
+					};
+				};
+			};
+
+			mdss0_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,sa8775p-dsi-phy-5nm";
+				reg = <0x0 0x0ae96400 0x0 0x200>,
+				      <0x0 0x0ae96600 0x0 0x280>,
+				      <0x0 0x0ae96900 0x0 0x27c>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss0_dp0_phy: phy@aec2a00 {
+				compatible = "qcom,sa8775p-edp-phy";
+
+				reg = <0x0 0x0aec2a00 0x0 0x200>,
+				      <0x0 0x0aec2200 0x0 0xd0>,
+				      <0x0 0x0aec2600 0x0 0xd0>,
+				      <0x0 0x0aec2000 0x0 0x1c8>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss0_dp1_phy: phy@aec5a00 {
+				compatible = "qcom,sa8775p-edp-phy";
+
+				reg = <0x0 0x0aec5a00 0x0 0x200>,
+				      <0x0 0x0aec5200 0x0 0xd0>,
+				      <0x0 0x0aec5600 0x0 0xd0>,
+				      <0x0 0x0aec5000 0x0 0x1c8>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss0_dp0: displayport-controller@af54000 {
+				compatible = "qcom,sa8775p-dp";
+
+				reg = <0x0 0x0af54000 0x0 0x104>,
+				      <0x0 0x0af54200 0x0 0x0c0>,
+				      <0x0 0x0af55000 0x0 0x770>,
+				      <0x0 0x0af56000 0x0 0x09c>,
+				      <0x0 0x0af57000 0x0 0x09c>,
+				      <0x0 0x0af58000 0x0 0x09c>,
+				      <0x0 0x0af59000 0x0 0x09c>,
+				      <0x0 0x0af5a000 0x0 0x23c>,
+				      <0x0 0x0af5b000 0x0 0x23c>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <12>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel",
+					      "stream_2_pixel",
+					      "stream_3_pixel";
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp0_phy 0>,
+							 <&mdss0_dp0_phy 1>,
+							 <&mdss0_dp0_phy 1>,
+							 <&mdss0_dp0_phy 1>,
+							 <&mdss0_dp0_phy 1>;
+				phys = <&mdss0_dp0_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp0_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp1: displayport-controller@af5c000 {
+				compatible = "qcom,sa8775p-dp";
+
+				reg = <0x0 0x0af5c000 0x0 0x104>,
+				      <0x0 0x0af5c200 0x0 0x0c0>,
+				      <0x0 0x0af5d000 0x0 0x770>,
+				      <0x0 0x0af5e000 0x0 0x09c>,
+				      <0x0 0x0af5f000 0x0 0x09c>,
+				      <0x0 0x0af60000 0x0 0x09c>,
+				      <0x0 0x0af61000 0x0 0x09c>,
+				      <0x0 0x0af62000 0x0 0x23c>,
+				      <0x0 0x0af63000 0x0 0x23c>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <13>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp1_phy 0>,
+							 <&mdss0_dp1_phy 1>,
+							 <&mdss0_dp1_phy 1>;
+				phys = <&mdss0_dp1_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp1_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp1_in: endpoint {
+							remote-endpoint = <&dpu_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp1_out: endpoint { };
+					};
+				};
+
+				dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		dispcc0: clock-controller@af00000 {
+			compatible = "qcom,sa8775p-dispcc0";
+			reg = <0x0 0x0af00000 0x0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>,
+				 <&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>,
+				 <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
+			power-domains = <&rpmhpd SA8775P_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x30000>,
@@ -3897,6 +5416,812 @@
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 149>;
 			wakeup-parent = <&pdc>;
+
+			dp0_hot_plug_det: dp0-hot-plug-det-state {
+				pins = "gpio101";
+				function = "edp0_hot";
+				bias-disable;
+			};
+
+			dp1_hot_plug_det: dp1-hot-plug-det-state {
+				pins = "gpio102";
+				function = "edp1_hot";
+				bias-disable;
+			};
+
+			hs0_mi2s_active: hs0-mi2s-active-state {
+				pins = "gpio114", "gpio115", "gpio116", "gpio117";
+				function = "hs0_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			hs2_mi2s_active: hs2-mi2s-active-state {
+				pins = "gpio122", "gpio123", "gpio124", "gpio125";
+				function = "hs2_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			cci0_0_default: cci0-0-default-state {
+				pins = "gpio60", "gpio61";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				pins = "gpio60", "gpio61";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				pins = "gpio52", "gpio53";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				pins = "gpio52", "gpio53";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				pins = "gpio62", "gpio63";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				pins = "gpio62", "gpio63";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_1_default: cci1-1-default-state {
+				pins = "gpio54", "gpio55";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci1_1_sleep: cci1-1-sleep-state {
+				pins = "gpio54", "gpio55";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_0_default: cci2-0-default-state {
+				pins = "gpio64", "gpio65";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci2_0_sleep: cci2-0-sleep-state {
+				pins = "gpio64", "gpio65";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_1_default: cci2-1-default-state {
+				pins = "gpio56", "gpio57";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci2_1_sleep: cci2-1-sleep-state {
+				pins = "gpio56", "gpio57";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_0_default: cci3-0-default-state {
+				pins = "gpio66", "gpio67";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci3_0_sleep: cci3-0-sleep-state {
+				pins = "gpio66", "gpio67";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_1_default: cci3-1-default-state {
+				pins = "gpio58", "gpio59";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci3_1_sleep: cci3-1-sleep-state {
+				pins = "gpio58", "gpio59";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_i2c0_default: qup-i2c0-state {
+				pins = "gpio20", "gpio21";
+				function = "qup0_se0";
+			};
+
+			qup_i2c1_default: qup-i2c1-state {
+				pins = "gpio24", "gpio25";
+				function = "qup0_se1";
+			};
+
+			qup_i2c2_default: qup-i2c2-state {
+				pins = "gpio36", "gpio37";
+				function = "qup0_se2";
+			};
+
+			qup_i2c3_default: qup-i2c3-state {
+				pins = "gpio28", "gpio29";
+				function = "qup0_se3";
+			};
+
+			qup_i2c4_default: qup-i2c4-state {
+				pins = "gpio32", "gpio33";
+				function = "qup0_se4";
+			};
+
+			qup_i2c5_default: qup-i2c5-state {
+				pins = "gpio36", "gpio37";
+				function = "qup0_se5";
+			};
+
+			qup_i2c7_default: qup-i2c7-state {
+				pins = "gpio40", "gpio41";
+				function = "qup1_se0";
+			};
+
+			qup_i2c8_default: qup-i2c8-state {
+				pins = "gpio42", "gpio43";
+				function = "qup1_se1";
+			};
+
+			qup_i2c9_default: qup-i2c9-state {
+				pins = "gpio46", "gpio47";
+				function = "qup1_se2";
+			};
+
+			qup_i2c10_default: qup-i2c10-state {
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+			};
+
+			qup_i2c11_default: qup-i2c11-state {
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+			};
+
+			qup_i2c12_default: qup-i2c12-state {
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+			};
+
+			qup_i2c13_default: qup-i2c13-state {
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+			};
+
+			qup_i2c14_default: qup-i2c14-state {
+				pins = "gpio80", "gpio81";
+				function = "qup2_se0";
+			};
+
+			qup_i2c15_default: qup-i2c15-state {
+				pins = "gpio84", "gpio85";
+				function = "qup2_se1";
+			};
+
+			qup_i2c16_default: qup-i2c16-state {
+				pins = "gpio86", "gpio87";
+				function = "qup2_se2";
+			};
+
+			qup_i2c17_default: qup-i2c17-state {
+				pins = "gpio91", "gpio92";
+				function = "qup2_se3";
+			};
+
+			qup_i2c18_default: qup-i2c18-state {
+				pins = "gpio95", "gpio96";
+				function = "qup2_se4";
+			};
+
+			qup_i2c19_default: qup-i2c19-state {
+				pins = "gpio99", "gpio100";
+				function = "qup2_se5";
+			};
+
+			qup_i2c20_default: qup-i2c20-state {
+				pins = "gpio97", "gpio98";
+				function = "qup2_se6";
+			};
+
+			qup_i2c21_default: qup-i2c21-state {
+				pins = "gpio13", "gpio14";
+				function = "qup3_se0";
+			};
+
+			qup_spi0_default: qup-spi0-state {
+				pins = "gpio20", "gpio21", "gpio22", "gpio23";
+				function = "qup0_se0";
+			};
+
+			qup_spi1_default: qup-spi1-state {
+				pins = "gpio24", "gpio25", "gpio26", "gpio27";
+				function = "qup0_se1";
+			};
+
+			qup_spi2_default: qup-spi2-state {
+				pins = "gpio36", "gpio37", "gpio38", "gpio39";
+				function = "qup0_se2";
+			};
+
+			qup_spi3_default: qup-spi3-state {
+				pins = "gpio28", "gpio29", "gpio30", "gpio31";
+				function = "qup0_se3";
+			};
+
+			qup_spi4_default: qup-spi4-state {
+				pins = "gpio32", "gpio33", "gpio34", "gpio35";
+				function = "qup0_se4";
+			};
+
+			qup_spi5_default: qup-spi5-state {
+				pins = "gpio36", "gpio37", "gpio38", "gpio39";
+				function = "qup0_se5";
+			};
+
+			qup_spi7_default: qup-spi7-state {
+				pins = "gpio40", "gpio41", "gpio42", "gpio43";
+				function = "qup1_se0";
+			};
+
+			qup_spi8_default: qup-spi8-state {
+				pins = "gpio42", "gpio43", "gpio40", "gpio41";
+				function = "qup1_se1";
+			};
+
+			qup_spi9_default: qup-spi9-state {
+				pins = "gpio46", "gpio47", "gpio44", "gpio45";
+				function = "qup1_se2";
+			};
+
+			qup_spi10_default: qup-spi10-state {
+				pins = "gpio44", "gpio45", "gpio46", "gpio47";
+				function = "qup1_se3";
+			};
+
+			qup_spi11_default: qup-spi11-state {
+				pins = "gpio48", "gpio49", "gpio50", "gpio51";
+				function = "qup1_se4";
+			};
+
+			qup_spi12_default: qup-spi12-state {
+				pins = "gpio52", "gpio53", "gpio54", "gpio55";
+				function = "qup1_se5";
+			};
+
+			qup_spi14_default: qup-spi14-state {
+				pins = "gpio80", "gpio81", "gpio82", "gpio83";
+				function = "qup2_se0";
+			};
+
+			qup_spi15_default: qup-spi15-state {
+				pins = "gpio84", "gpio85", "gpio99", "gpio100";
+				function = "qup2_se1";
+			};
+
+			qup_spi16_default: qup-spi16-state {
+				pins = "gpio86", "gpio87", "gpio88", "gpio89";
+				function = "qup2_se2";
+			};
+
+			qup_spi17_default: qup-spi17-state {
+				pins = "gpio91", "gpio92", "gpio93", "gpio94";
+				function = "qup2_se3";
+			};
+
+			qup_spi18_default: qup-spi18-state {
+				pins = "gpio95", "gpio96", "gpio97", "gpio98";
+				function = "qup2_se4";
+			};
+
+			qup_spi19_default: qup-spi19-state {
+				pins = "gpio99", "gpio100", "gpio84", "gpio85";
+				function = "qup2_se5";
+			};
+
+			qup_spi20_default: qup-spi20-state {
+				pins = "gpio97", "gpio98", "gpio95", "gpio96";
+				function = "qup2_se6";
+			};
+
+			qup_spi21_default: qup-spi21-state {
+				pins = "gpio13", "gpio14", "gpio15", "gpio16";
+				function = "qup3_se0";
+			};
+
+			qup_uart0_default: qup-uart0-state {
+				qup_uart0_cts: qup-uart0-cts-pins {
+					pins = "gpio20";
+					function = "qup0_se0";
+				};
+
+				qup_uart0_rts: qup-uart0-rts-pins {
+					pins = "gpio21";
+					function = "qup0_se0";
+				};
+
+				qup_uart0_tx: qup-uart0-tx-pins {
+					pins = "gpio22";
+					function = "qup0_se0";
+				};
+
+				qup_uart0_rx: qup-uart0-rx-pins {
+					pins = "gpio23";
+					function = "qup0_se0";
+				};
+			};
+
+			qup_uart1_default: qup-uart1-state {
+				qup_uart1_cts: qup-uart1-cts-pins {
+					pins = "gpio24";
+					function = "qup0_se1";
+				};
+
+				qup_uart1_rts: qup-uart1-rts-pins {
+					pins = "gpio25";
+					function = "qup0_se1";
+				};
+
+				qup_uart1_tx: qup-uart1-tx-pins {
+					pins = "gpio26";
+					function = "qup0_se1";
+				};
+
+				qup_uart1_rx: qup-uart1-rx-pins {
+					pins = "gpio27";
+					function = "qup0_se1";
+				};
+			};
+
+			qup_uart2_default: qup-uart2-state {
+				qup_uart2_cts: qup-uart2-cts-pins {
+					pins = "gpio36";
+					function = "qup0_se2";
+				};
+
+				qup_uart2_rts: qup-uart2-rts-pins {
+					pins = "gpio37";
+					function = "qup0_se2";
+				};
+
+				qup_uart2_tx: qup-uart2-tx-pins {
+					pins = "gpio38";
+					function = "qup0_se2";
+				};
+
+				qup_uart2_rx: qup-uart2-rx-pins {
+					pins = "gpio39";
+					function = "qup0_se2";
+				};
+			};
+
+			qup_uart3_default: qup-uart3-state {
+				qup_uart3_cts: qup-uart3-cts-pins {
+					pins = "gpio28";
+					function = "qup0_se3";
+				};
+
+				qup_uart3_rts: qup-uart3-rts-pins {
+					pins = "gpio29";
+					function = "qup0_se3";
+				};
+
+				qup_uart3_tx: qup-uart3-tx-pins {
+					pins = "gpio30";
+					function = "qup0_se3";
+				};
+
+				qup_uart3_rx: qup-uart3-rx-pins {
+					pins = "gpio31";
+					function = "qup0_se3";
+				};
+			};
+
+			qup_uart4_default: qup-uart4-state {
+				qup_uart4_cts: qup-uart4-cts-pins {
+					pins = "gpio32";
+					function = "qup0_se4";
+				};
+
+				qup_uart4_rts: qup-uart4-rts-pins {
+					pins = "gpio33";
+					function = "qup0_se4";
+				};
+
+				qup_uart4_tx: qup-uart4-tx-pins {
+					pins = "gpio34";
+					function = "qup0_se4";
+				};
+
+				qup_uart4_rx: qup-uart4-rx-pins {
+					pins = "gpio35";
+					function = "qup0_se4";
+				};
+			};
+
+			qup_uart5_default: qup-uart5-state {
+				qup_uart5_cts: qup-uart5-cts-pins {
+					pins = "gpio36";
+					function = "qup0_se5";
+				};
+
+				qup_uart5_rts: qup-uart5-rts-pins {
+					pins = "gpio37";
+					function = "qup0_se5";
+				};
+
+				qup_uart5_tx: qup-uart5-tx-pins {
+					pins = "gpio38";
+					function = "qup0_se5";
+				};
+
+				qup_uart5_rx: qup-uart5-rx-pins {
+					pins = "gpio39";
+					function = "qup0_se5";
+				};
+			};
+
+			qup_uart7_default: qup-uart7-state {
+				qup_uart7_cts: qup-uart7-cts-pins {
+					pins = "gpio40";
+					function = "qup1_se0";
+				};
+
+				qup_uart7_rts: qup-uart7-rts-pins {
+					pins = "gpio41";
+					function = "qup1_se0";
+				};
+
+				qup_uart7_tx: qup-uart7-tx-pins {
+					pins = "gpio42";
+					function = "qup1_se0";
+				};
+
+				qup_uart7_rx: qup-uart7-rx-pins {
+					pins = "gpio43";
+					function = "qup1_se0";
+				};
+			};
+
+			qup_uart8_default: qup-uart8-state {
+				qup_uart8_cts: qup-uart8-cts-pins {
+					pins = "gpio42";
+					function = "qup1_se1";
+				};
+
+				qup_uart8_rts: qup-uart8-rts-pins {
+					pins = "gpio43";
+					function = "qup1_se1";
+				};
+
+				qup_uart8_tx: qup-uart8-tx-pins {
+					pins = "gpio40";
+					function = "qup1_se1";
+				};
+
+				qup_uart8_rx: qup-uart8-rx-pins {
+					pins = "gpio41";
+					function = "qup1_se1";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-state {
+				qup_uart9_cts: qup-uart9-cts-pins {
+					pins = "gpio46";
+					function = "qup1_se2";
+				};
+
+				qup_uart9_rts: qup-uart9-rts-pins {
+					pins = "gpio47";
+					function = "qup1_se2";
+				};
+
+				qup_uart9_tx: qup-uart9-tx-pins {
+					pins = "gpio44";
+					function = "qup1_se2";
+				};
+
+				qup_uart9_rx: qup-uart9-rx-pins {
+					pins = "gpio45";
+					function = "qup1_se2";
+				};
+			};
+
+			qup_uart10_default: qup-uart10-state {
+				pins = "gpio46", "gpio47";
+				function = "qup1_se3";
+			};
+
+			qup_uart11_default: qup-uart11-state {
+				qup_uart11_cts: qup-uart11-cts-pins {
+					pins = "gpio48";
+					function = "qup1_se4";
+				};
+
+				qup_uart11_rts: qup-uart11-rts-pins {
+					pins = "gpio49";
+					function = "qup1_se4";
+				};
+
+				qup_uart11_tx: qup-uart11-tx-pins {
+					pins = "gpio50";
+					function = "qup1_se4";
+				};
+
+				qup_uart11_rx: qup-uart11-rx-pins {
+					pins = "gpio51";
+					function = "qup1_se4";
+				};
+			};
+
+			qup_uart12_default: qup-uart12-state {
+				qup_uart12_cts: qup-uart12-cts-pins {
+					pins = "gpio52";
+					function = "qup1_se5";
+				};
+
+				qup_uart12_rts: qup-uart12-rts-pins {
+					pins = "gpio53";
+					function = "qup1_se5";
+				};
+
+				qup_uart12_tx: qup-uart12-tx-pins {
+					pins = "gpio54";
+					function = "qup1_se5";
+				};
+
+				qup_uart12_rx: qup-uart12-rx-pins {
+					pins = "gpio55";
+					function = "qup1_se5";
+				};
+			};
+
+			qup_uart14_default: qup-uart14-state {
+				qup_uart14_cts: qup-uart14-cts-pins {
+					pins = "gpio80";
+					function = "qup2_se0";
+				};
+
+				qup_uart14_rts: qup-uart14-rts-pins {
+					pins = "gpio81";
+					function = "qup2_se0";
+				};
+
+				qup_uart14_tx: qup-uart14-tx-pins {
+					pins = "gpio82";
+					function = "qup2_se0";
+				};
+
+				qup_uart14_rx: qup-uart14-rx-pins {
+					pins = "gpio83";
+					function = "qup2_se0";
+				};
+			};
+
+			qup_uart15_default: qup-uart15-state {
+				qup_uart15_cts: qup-uart15-cts-pins {
+					pins = "gpio84";
+					function = "qup2_se1";
+				};
+
+				qup_uart15_rts: qup-uart15-rts-pins {
+					pins = "gpio85";
+					function = "qup2_se1";
+				};
+
+				qup_uart15_tx: qup-uart15-tx-pins {
+					pins = "gpio99";
+					function = "qup2_se1";
+				};
+
+				qup_uart15_rx: qup-uart15-rx-pins {
+					pins = "gpio100";
+					function = "qup2_se1";
+				};
+			};
+
+			qup_uart16_default: qup-uart16-state {
+				qup_uart16_cts: qup-uart16-cts-pins {
+					pins = "gpio86";
+					function = "qup2_se2";
+				};
+
+				qup_uart16_rts: qup-uart16-rts-pins {
+					pins = "gpio87";
+					function = "qup2_se2";
+				};
+
+				qup_uart16_tx: qup-uart16-tx-pins {
+					pins = "gpio88";
+					function = "qup2_se2";
+				};
+
+				qup_uart16_rx: qup-uart16-rx-pins {
+					pins = "gpio89";
+					function = "qup2_se2";
+				};
+			};
+
+			qup_uart17_default: qup-uart17-state {
+				qup_uart17_cts: qup-uart17-cts-pins {
+					pins = "gpio91";
+					function = "qup2_se3";
+				};
+
+				qup_uart17_rts: qup0-uart17-rts-pins {
+					pins = "gpio92";
+					function = "qup2_se3";
+				};
+
+				qup_uart17_tx: qup0-uart17-tx-pins {
+					pins = "gpio93";
+					function = "qup2_se3";
+				};
+
+				qup_uart17_rx: qup0-uart17-rx-pins {
+					pins = "gpio94";
+					function = "qup2_se3";
+				};
+			};
+
+			qup_uart18_default: qup-uart18-state {
+				qup_uart18_cts: qup-uart18-cts-pins {
+					pins = "gpio95";
+					function = "qup2_se4";
+				};
+
+				qup_uart18_rts: qup-uart18-rts-pins {
+					pins = "gpio96";
+					function = "qup2_se4";
+				};
+
+				qup_uart18_tx: qup-uart18-tx-pins {
+					pins = "gpio97";
+					function = "qup2_se4";
+				};
+
+				qup_uart18_rx: qup-uart18-rx-pins {
+					pins = "gpio98";
+					function = "qup2_se4";
+				};
+			};
+
+			qup_uart19_default: qup-uart19-state {
+				qup_uart19_cts: qup-uart19-cts-pins {
+					pins = "gpio99";
+					function = "qup2_se5";
+				};
+
+				qup_uart19_rts: qup-uart19-rts-pins {
+					pins = "gpio100";
+					function = "qup2_se5";
+				};
+
+				qup_uart19_tx: qup-uart19-tx-pins {
+					pins = "gpio84";
+					function = "qup2_se5";
+				};
+
+				qup_uart19_rx: qup-uart19-rx-pins {
+					pins = "gpio85";
+					function = "qup2_se5";
+				};
+			};
+
+			qup_uart20_default: qup-uart20-state {
+				qup_uart20_cts: qup-uart20-cts-pins {
+					pins = "gpio97";
+					function = "qup2_se6";
+				};
+
+				qup_uart20_rts: qup-uart20-rts-pins {
+					pins = "gpio98";
+					function = "qup2_se6";
+				};
+
+				qup_uart20_tx: qup-uart20-tx-pins {
+					pins = "gpio95";
+					function = "qup2_se6";
+				};
+
+				qup_uart20_rx: qup-uart20-rx-pins {
+					pins = "gpio96";
+					function = "qup2_se6";
+				};
+			};
+
+			qup_uart21_default: qup-uart21-state {
+				qup_uart21_cts: qup-uart21-cts-pins {
+					pins = "gpio13";
+					function = "qup3_se0";
+				};
+
+				qup_uart21_rts: qup-uart21-rts-pins {
+					pins = "gpio14";
+					function = "qup3_se0";
+				};
+
+				qup_uart21_tx: qup-uart21-tx-pins {
+					pins = "gpio15";
+					function = "qup3_se0";
+				};
+
+				qup_uart21_rx: qup-uart21-rx-pins {
+					pins = "gpio16";
+					function = "qup3_se0";
+				};
+			};
+
+			sdc_default: sdc-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc_sleep: sdc-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
 		};
 
 		sram: sram@146d8000 {
@@ -4132,6 +6457,7 @@
 			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#redistributor-regions = <1>;
@@ -4219,6 +6545,7 @@
 					  <WAKE_TCS 3>,
 					  <CONTROL_TCS 0>;
 			label = "apps_rsc";
+			power-domains = <&system_pd>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -4282,6 +6609,15 @@
 			};
 		};
 
+		epss_l3_cl0: interconnect@18590000 {
+			compatible = "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18590000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@18591000 {
 			compatible = "qcom,sa8775p-cpufreq-epss",
 				     "qcom,cpufreq-epss";
@@ -4289,20 +6625,33 @@
 			      <0x0 0x18593000 0x0 0x1000>;
 			reg-names = "freq-domain0", "freq-domain1";
 
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
 		};
 
+		epss_l3_cl1: interconnect@18592000 {
+			compatible = "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18592000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
 		remoteproc_gpdsp0: remoteproc@20c00000 {
 			compatible = "qcom,sa8775p-gpdsp0-pas";
 			reg = <0x0 0x20c00000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_gpdsp0_in 0 0>,
-					      <&smp2p_gpdsp0_in 2 0>,
 					      <&smp2p_gpdsp0_in 1 0>,
+					      <&smp2p_gpdsp0_in 2 0>,
 					      <&smp2p_gpdsp0_in 3 0>;
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
@@ -4310,8 +6659,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>;
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>;
 			power-domain-names = "cx", "mxc";
 
 			interconnects = <&gpdsp_anoc MASTER_DSP0 0
@@ -4335,6 +6684,35 @@
 
 				label = "gpdsp0";
 				qcom,remote-pid = <17>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "gdsp0";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x38a1 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x38a2 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x38a3 0x0>;
+						dma-coherent;
+					};
+				};
 			};
 		};
 
@@ -4344,8 +6722,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_gpdsp1_in 0 0>,
-					      <&smp2p_gpdsp1_in 2 0>,
 					      <&smp2p_gpdsp1_in 1 0>,
+					      <&smp2p_gpdsp1_in 2 0>,
 					      <&smp2p_gpdsp1_in 3 0>;
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
@@ -4353,8 +6731,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>;
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>;
 			power-domain-names = "cx", "mxc";
 
 			interconnects = <&gpdsp_anoc MASTER_DSP1 0
@@ -4378,9 +6756,54 @@
 
 				label = "gpdsp1";
 				qcom,remote-pid = <18>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "gdsp1";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x38c1 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x38c2 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x38c3 0x0>;
+						dma-coherent;
+					};
+				};
 			};
 		};
 
+		dispcc1: clock-controller@22100000 {
+			compatible = "qcom,sa8775p-dispcc1";
+			reg = <0x0 0x22100000 0x0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <0>, <0>, <0>, <0>,
+				 <0>, <0>, <0>, <0>;
+			power-domains = <&rpmhpd SA8775P_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
 		ethernet1: ethernet@23000000 {
 			compatible = "qcom,sa8775p-ethqos";
 			reg = <0x0 0x23000000 0x0 0x10000>,
@@ -4400,11 +6823,12 @@
 				      "ptp_ref",
 				      "phyaux";
 
-			interconnects = <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>;
-			interconnect-names = "mac-mem", "cpu-mac";
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>,
+					<&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-mac",
+					     "mac-mem";
 
 			power-domains = <&gcc EMAC1_GDSC>;
 
@@ -4441,11 +6865,12 @@
 				      "ptp_ref",
 				      "phyaux";
 
-			interconnects = <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>;
-			interconnect-names = "mac-mem", "cpu-mac";
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>,
+					<&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-mac",
+					     "mac-mem";
 
 			power-domains = <&gcc EMAC0_GDSC>;
 
@@ -4469,8 +6894,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
@@ -4478,9 +6903,9 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>,
-					<&rpmhpd RPMHPD_NSP0>;
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>,
+					<&rpmhpd SA8775P_NSP0>;
 			power-domain-names = "cx", "mxc", "nsp";
 
 			interconnects = <&nspa_noc MASTER_CDSP_PROC 0
@@ -4516,15 +6941,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <1>;
 						iommus = <&apps_smmu 0x2141 0x04a0>,
-							 <&apps_smmu 0x2161 0x04a0>,
-							 <&apps_smmu 0x2181 0x0400>,
-							 <&apps_smmu 0x21c1 0x04a0>,
-							 <&apps_smmu 0x21e1 0x04a0>,
-							 <&apps_smmu 0x2541 0x04a0>,
-							 <&apps_smmu 0x2561 0x04a0>,
-							 <&apps_smmu 0x2581 0x0400>,
-							 <&apps_smmu 0x25c1 0x04a0>,
-							 <&apps_smmu 0x25e1 0x04a0>;
+							 <&apps_smmu 0x2181 0x0400>;
 						dma-coherent;
 					};
 
@@ -4532,15 +6949,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <2>;
 						iommus = <&apps_smmu 0x2142 0x04a0>,
-							 <&apps_smmu 0x2162 0x04a0>,
-							 <&apps_smmu 0x2182 0x0400>,
-							 <&apps_smmu 0x21c2 0x04a0>,
-							 <&apps_smmu 0x21e2 0x04a0>,
-							 <&apps_smmu 0x2542 0x04a0>,
-							 <&apps_smmu 0x2562 0x04a0>,
-							 <&apps_smmu 0x2582 0x0400>,
-							 <&apps_smmu 0x25c2 0x04a0>,
-							 <&apps_smmu 0x25e2 0x04a0>;
+							 <&apps_smmu 0x2182 0x0400>;
 						dma-coherent;
 					};
 
@@ -4548,15 +6957,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x2143 0x04a0>,
-							 <&apps_smmu 0x2163 0x04a0>,
-							 <&apps_smmu 0x2183 0x0400>,
-							 <&apps_smmu 0x21c3 0x04a0>,
-							 <&apps_smmu 0x21e3 0x04a0>,
-							 <&apps_smmu 0x2543 0x04a0>,
-							 <&apps_smmu 0x2563 0x04a0>,
-							 <&apps_smmu 0x2583 0x0400>,
-							 <&apps_smmu 0x25c3 0x04a0>,
-							 <&apps_smmu 0x25e3 0x04a0>;
+							 <&apps_smmu 0x2183 0x0400>;
 						dma-coherent;
 					};
 
@@ -4564,15 +6965,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x2144 0x04a0>,
-							 <&apps_smmu 0x2164 0x04a0>,
-							 <&apps_smmu 0x2184 0x0400>,
-							 <&apps_smmu 0x21c4 0x04a0>,
-							 <&apps_smmu 0x21e4 0x04a0>,
-							 <&apps_smmu 0x2544 0x04a0>,
-							 <&apps_smmu 0x2564 0x04a0>,
-							 <&apps_smmu 0x2584 0x0400>,
-							 <&apps_smmu 0x25c4 0x04a0>,
-							 <&apps_smmu 0x25e4 0x04a0>;
+							 <&apps_smmu 0x2184 0x0400>;
 						dma-coherent;
 					};
 
@@ -4580,15 +6973,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x2145 0x04a0>,
-							 <&apps_smmu 0x2165 0x04a0>,
-							 <&apps_smmu 0x2185 0x0400>,
-							 <&apps_smmu 0x21c5 0x04a0>,
-							 <&apps_smmu 0x21e5 0x04a0>,
-							 <&apps_smmu 0x2545 0x04a0>,
-							 <&apps_smmu 0x2565 0x04a0>,
-							 <&apps_smmu 0x2585 0x0400>,
-							 <&apps_smmu 0x25c5 0x04a0>,
-							 <&apps_smmu 0x25e5 0x04a0>;
+							 <&apps_smmu 0x2185 0x0400>;
 						dma-coherent;
 					};
 
@@ -4596,15 +6981,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <6>;
 						iommus = <&apps_smmu 0x2146 0x04a0>,
-							 <&apps_smmu 0x2166 0x04a0>,
-							 <&apps_smmu 0x2186 0x0400>,
-							 <&apps_smmu 0x21c6 0x04a0>,
-							 <&apps_smmu 0x21e6 0x04a0>,
-							 <&apps_smmu 0x2546 0x04a0>,
-							 <&apps_smmu 0x2566 0x04a0>,
-							 <&apps_smmu 0x2586 0x0400>,
-							 <&apps_smmu 0x25c6 0x04a0>,
-							 <&apps_smmu 0x25e6 0x04a0>;
+							 <&apps_smmu 0x2186 0x0400>;
 						dma-coherent;
 					};
 
@@ -4612,15 +6989,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <7>;
 						iommus = <&apps_smmu 0x2147 0x04a0>,
-							 <&apps_smmu 0x2167 0x04a0>,
-							 <&apps_smmu 0x2187 0x0400>,
-							 <&apps_smmu 0x21c7 0x04a0>,
-							 <&apps_smmu 0x21e7 0x04a0>,
-							 <&apps_smmu 0x2547 0x04a0>,
-							 <&apps_smmu 0x2567 0x04a0>,
-							 <&apps_smmu 0x2587 0x0400>,
-							 <&apps_smmu 0x25c7 0x04a0>,
-							 <&apps_smmu 0x25e7 0x04a0>;
+							 <&apps_smmu 0x2187 0x0400>;
 						dma-coherent;
 					};
 
@@ -4628,15 +6997,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <8>;
 						iommus = <&apps_smmu 0x2148 0x04a0>,
-							 <&apps_smmu 0x2168 0x04a0>,
-							 <&apps_smmu 0x2188 0x0400>,
-							 <&apps_smmu 0x21c8 0x04a0>,
-							 <&apps_smmu 0x21e8 0x04a0>,
-							 <&apps_smmu 0x2548 0x04a0>,
-							 <&apps_smmu 0x2568 0x04a0>,
-							 <&apps_smmu 0x2588 0x0400>,
-							 <&apps_smmu 0x25c8 0x04a0>,
-							 <&apps_smmu 0x25e8 0x04a0>;
+							 <&apps_smmu 0x2188 0x0400>;
 						dma-coherent;
 					};
 
@@ -4644,31 +7005,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <9>;
 						iommus = <&apps_smmu 0x2149 0x04a0>,
-							 <&apps_smmu 0x2169 0x04a0>,
-							 <&apps_smmu 0x2189 0x0400>,
-							 <&apps_smmu 0x21c9 0x04a0>,
-							 <&apps_smmu 0x21e9 0x04a0>,
-							 <&apps_smmu 0x2549 0x04a0>,
-							 <&apps_smmu 0x2569 0x04a0>,
-							 <&apps_smmu 0x2589 0x0400>,
-							 <&apps_smmu 0x25c9 0x04a0>,
-							 <&apps_smmu 0x25e9 0x04a0>;
-						dma-coherent;
-					};
-
-					compute-cb@10 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <10>;
-						iommus = <&apps_smmu 0x214a 0x04a0>,
-							 <&apps_smmu 0x216a 0x04a0>,
-							 <&apps_smmu 0x218a 0x0400>,
-							 <&apps_smmu 0x21ca 0x04a0>,
-							 <&apps_smmu 0x21ea 0x04a0>,
-							 <&apps_smmu 0x254a 0x04a0>,
-							 <&apps_smmu 0x256a 0x04a0>,
-							 <&apps_smmu 0x258a 0x0400>,
-							 <&apps_smmu 0x25ca 0x04a0>,
-							 <&apps_smmu 0x25ea 0x04a0>;
+							 <&apps_smmu 0x2189 0x0400>;
 						dma-coherent;
 					};
 
@@ -4676,15 +7013,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <11>;
 						iommus = <&apps_smmu 0x214b 0x04a0>,
-							 <&apps_smmu 0x216b 0x04a0>,
-							 <&apps_smmu 0x218b 0x0400>,
-							 <&apps_smmu 0x21cb 0x04a0>,
-							 <&apps_smmu 0x21eb 0x04a0>,
-							 <&apps_smmu 0x254b 0x04a0>,
-							 <&apps_smmu 0x256b 0x04a0>,
-							 <&apps_smmu 0x258b 0x0400>,
-							 <&apps_smmu 0x25cb 0x04a0>,
-							 <&apps_smmu 0x25eb 0x04a0>;
+							 <&apps_smmu 0x218b 0x0400>;
 						dma-coherent;
 					};
 				};
@@ -4697,8 +7026,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
@@ -4706,9 +7035,9 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>,
-					<&rpmhpd RPMHPD_NSP1>;
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>,
+					<&rpmhpd SA8775P_NSP1>;
 			power-domain-names = "cx", "mxc", "nsp";
 
 			interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
@@ -4744,15 +7073,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <1>;
 						iommus = <&apps_smmu 0x2941 0x04a0>,
-							 <&apps_smmu 0x2961 0x04a0>,
-							 <&apps_smmu 0x2981 0x0400>,
-							 <&apps_smmu 0x29c1 0x04a0>,
-							 <&apps_smmu 0x29e1 0x04a0>,
-							 <&apps_smmu 0x2d41 0x04a0>,
-							 <&apps_smmu 0x2d61 0x04a0>,
-							 <&apps_smmu 0x2d81 0x0400>,
-							 <&apps_smmu 0x2dc1 0x04a0>,
-							 <&apps_smmu 0x2de1 0x04a0>;
+							 <&apps_smmu 0x2981 0x0400>;
 						dma-coherent;
 					};
 
@@ -4760,15 +7081,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <2>;
 						iommus = <&apps_smmu 0x2942 0x04a0>,
-							 <&apps_smmu 0x2962 0x04a0>,
-							 <&apps_smmu 0x2982 0x0400>,
-							 <&apps_smmu 0x29c2 0x04a0>,
-							 <&apps_smmu 0x29e2 0x04a0>,
-							 <&apps_smmu 0x2d42 0x04a0>,
-							 <&apps_smmu 0x2d62 0x04a0>,
-							 <&apps_smmu 0x2d82 0x0400>,
-							 <&apps_smmu 0x2dc2 0x04a0>,
-							 <&apps_smmu 0x2de2 0x04a0>;
+							 <&apps_smmu 0x2982 0x0400>;
 						dma-coherent;
 					};
 
@@ -4776,15 +7089,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <3>;
 						iommus = <&apps_smmu 0x2943 0x04a0>,
-							 <&apps_smmu 0x2963 0x04a0>,
-							 <&apps_smmu 0x2983 0x0400>,
-							 <&apps_smmu 0x29c3 0x04a0>,
-							 <&apps_smmu 0x29e3 0x04a0>,
-							 <&apps_smmu 0x2d43 0x04a0>,
-							 <&apps_smmu 0x2d63 0x04a0>,
-							 <&apps_smmu 0x2d83 0x0400>,
-							 <&apps_smmu 0x2dc3 0x04a0>,
-							 <&apps_smmu 0x2de3 0x04a0>;
+							 <&apps_smmu 0x2983 0x0400>;
 						dma-coherent;
 					};
 
@@ -4792,15 +7097,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <4>;
 						iommus = <&apps_smmu 0x2944 0x04a0>,
-							 <&apps_smmu 0x2964 0x04a0>,
-							 <&apps_smmu 0x2984 0x0400>,
-							 <&apps_smmu 0x29c4 0x04a0>,
-							 <&apps_smmu 0x29e4 0x04a0>,
-							 <&apps_smmu 0x2d44 0x04a0>,
-							 <&apps_smmu 0x2d64 0x04a0>,
-							 <&apps_smmu 0x2d84 0x0400>,
-							 <&apps_smmu 0x2dc4 0x04a0>,
-							 <&apps_smmu 0x2de4 0x04a0>;
+							 <&apps_smmu 0x2984 0x0400>;
 						dma-coherent;
 					};
 
@@ -4808,15 +7105,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <5>;
 						iommus = <&apps_smmu 0x2945 0x04a0>,
-							 <&apps_smmu 0x2965 0x04a0>,
-							 <&apps_smmu 0x2985 0x0400>,
-							 <&apps_smmu 0x29c5 0x04a0>,
-							 <&apps_smmu 0x29e5 0x04a0>,
-							 <&apps_smmu 0x2d45 0x04a0>,
-							 <&apps_smmu 0x2d65 0x04a0>,
-							 <&apps_smmu 0x2d85 0x0400>,
-							 <&apps_smmu 0x2dc5 0x04a0>,
-							 <&apps_smmu 0x2de5 0x04a0>;
+							 <&apps_smmu 0x2985 0x0400>;
 						dma-coherent;
 					};
 
@@ -4824,15 +7113,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <6>;
 						iommus = <&apps_smmu 0x2946 0x04a0>,
-							 <&apps_smmu 0x2966 0x04a0>,
-							 <&apps_smmu 0x2986 0x0400>,
-							 <&apps_smmu 0x29c6 0x04a0>,
-							 <&apps_smmu 0x29e6 0x04a0>,
-							 <&apps_smmu 0x2d46 0x04a0>,
-							 <&apps_smmu 0x2d66 0x04a0>,
-							 <&apps_smmu 0x2d86 0x0400>,
-							 <&apps_smmu 0x2dc6 0x04a0>,
-							 <&apps_smmu 0x2de6 0x04a0>;
+							 <&apps_smmu 0x2986 0x0400>;
 						dma-coherent;
 					};
 
@@ -4840,15 +7121,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <7>;
 						iommus = <&apps_smmu 0x2947 0x04a0>,
-							 <&apps_smmu 0x2967 0x04a0>,
-							 <&apps_smmu 0x2987 0x0400>,
-							 <&apps_smmu 0x29c7 0x04a0>,
-							 <&apps_smmu 0x29e7 0x04a0>,
-							 <&apps_smmu 0x2d47 0x04a0>,
-							 <&apps_smmu 0x2d67 0x04a0>,
-							 <&apps_smmu 0x2d87 0x0400>,
-							 <&apps_smmu 0x2dc7 0x04a0>,
-							 <&apps_smmu 0x2de7 0x04a0>;
+							 <&apps_smmu 0x2987 0x0400>;
 						dma-coherent;
 					};
 
@@ -4856,15 +7129,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <8>;
 						iommus = <&apps_smmu 0x2948 0x04a0>,
-							 <&apps_smmu 0x2968 0x04a0>,
-							 <&apps_smmu 0x2988 0x0400>,
-							 <&apps_smmu 0x29c8 0x04a0>,
-							 <&apps_smmu 0x29e8 0x04a0>,
-							 <&apps_smmu 0x2d48 0x04a0>,
-							 <&apps_smmu 0x2d68 0x04a0>,
-							 <&apps_smmu 0x2d88 0x0400>,
-							 <&apps_smmu 0x2dc8 0x04a0>,
-							 <&apps_smmu 0x2de8 0x04a0>;
+							 <&apps_smmu 0x2988 0x0400>;
 						dma-coherent;
 					};
 
@@ -4872,15 +7137,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <9>;
 						iommus = <&apps_smmu 0x2949 0x04a0>,
-							 <&apps_smmu 0x2969 0x04a0>,
-							 <&apps_smmu 0x2989 0x0400>,
-							 <&apps_smmu 0x29c9 0x04a0>,
-							 <&apps_smmu 0x29e9 0x04a0>,
-							 <&apps_smmu 0x2d49 0x04a0>,
-							 <&apps_smmu 0x2d69 0x04a0>,
-							 <&apps_smmu 0x2d89 0x0400>,
-							 <&apps_smmu 0x2dc9 0x04a0>,
-							 <&apps_smmu 0x2de9 0x04a0>;
+							 <&apps_smmu 0x2989 0x0400>;
 						dma-coherent;
 					};
 
@@ -4888,15 +7145,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <10>;
 						iommus = <&apps_smmu 0x294a 0x04a0>,
-							 <&apps_smmu 0x296a 0x04a0>,
-							 <&apps_smmu 0x298a 0x0400>,
-							 <&apps_smmu 0x29ca 0x04a0>,
-							 <&apps_smmu 0x29ea 0x04a0>,
-							 <&apps_smmu 0x2d4a 0x04a0>,
-							 <&apps_smmu 0x2d6a 0x04a0>,
-							 <&apps_smmu 0x2d8a 0x0400>,
-							 <&apps_smmu 0x2dca 0x04a0>,
-							 <&apps_smmu 0x2dea 0x04a0>;
+							 <&apps_smmu 0x298a 0x0400>;
 						dma-coherent;
 					};
 
@@ -4904,15 +7153,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <11>;
 						iommus = <&apps_smmu 0x294b 0x04a0>,
-							 <&apps_smmu 0x296b 0x04a0>,
-							 <&apps_smmu 0x298b 0x0400>,
-							 <&apps_smmu 0x29cb 0x04a0>,
-							 <&apps_smmu 0x29eb 0x04a0>,
-							 <&apps_smmu 0x2d4b 0x04a0>,
-							 <&apps_smmu 0x2d6b 0x04a0>,
-							 <&apps_smmu 0x2d8b 0x0400>,
-							 <&apps_smmu 0x2dcb 0x04a0>,
-							 <&apps_smmu 0x2deb 0x04a0>;
+							 <&apps_smmu 0x298b 0x0400>;
 						dma-coherent;
 					};
 
@@ -4920,15 +7161,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <12>;
 						iommus = <&apps_smmu 0x294c 0x04a0>,
-							 <&apps_smmu 0x296c 0x04a0>,
-							 <&apps_smmu 0x298c 0x0400>,
-							 <&apps_smmu 0x29cc 0x04a0>,
-							 <&apps_smmu 0x29ec 0x04a0>,
-							 <&apps_smmu 0x2d4c 0x04a0>,
-							 <&apps_smmu 0x2d6c 0x04a0>,
-							 <&apps_smmu 0x2d8c 0x0400>,
-							 <&apps_smmu 0x2dcc 0x04a0>,
-							 <&apps_smmu 0x2dec 0x04a0>;
+							 <&apps_smmu 0x298c 0x0400>;
 						dma-coherent;
 					};
 
@@ -4936,15 +7169,7 @@
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <13>;
 						iommus = <&apps_smmu 0x294d 0x04a0>,
-							 <&apps_smmu 0x296d 0x04a0>,
-							 <&apps_smmu 0x298d 0x0400>,
-							 <&apps_smmu 0x29Cd 0x04a0>,
-							 <&apps_smmu 0x29ed 0x04a0>,
-							 <&apps_smmu 0x2d4d 0x04a0>,
-							 <&apps_smmu 0x2d6d 0x04a0>,
-							 <&apps_smmu 0x2d8d 0x0400>,
-							 <&apps_smmu 0x2dcd 0x04a0>,
-							 <&apps_smmu 0x2ded 0x04a0>;
+							 <&apps_smmu 0x298d 0x0400>;
 						dma-coherent;
 					};
 				};
@@ -4957,8 +7182,8 @@
 
 			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack";
@@ -4966,8 +7191,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
+			power-domains = <&rpmhpd SA8775P_LCX>,
+					<&rpmhpd SA8775P_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
@@ -5023,6 +7248,45 @@
 						dma-coherent;
 					};
 				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x3001 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
 			};
 		};
 	};
@@ -6034,9 +8298,17 @@
 			     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi0", "msi1", "msi2", "msi3",
-				  "msi4", "msi5", "msi6", "msi7";
+			     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi0",
+				  "msi1",
+				  "msi2",
+				  "msi3",
+				  "msi4",
+				  "msi5",
+				  "msi6",
+				  "msi7",
+				  "global";
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0x7>;
 		interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
@@ -6066,13 +8338,19 @@
 		iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
 			    <0x100 &pcie_smmu 0x0001 0x1>;
 
-		resets = <&gcc GCC_PCIE_0_BCR>;
-		reset-names = "pci";
+		resets = <&gcc GCC_PCIE_0_BCR>,
+			 <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
+		reset-names = "pci",
+			      "link_down";
+
 		power-domains = <&gcc PCIE_0_GDSC>;
 
 		phys = <&pcie0_phy>;
 		phy-names = "pciephy";
 
+		eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
+		eq-presets-16gts = /bits/ 8 <0x55 0x55>;
+
 		status = "disabled";
 
 		pcieport0: pcie@0 {
@@ -6092,7 +8370,7 @@
 		      <0x0 0x40000000 0x0 0xf20>,
 		      <0x0 0x40000f20 0x0 0xa8>,
 		      <0x0 0x40001000 0x0 0x4000>,
-		      <0x0 0x40200000 0x0 0x100000>,
+		      <0x0 0x40200000 0x0 0x1fe00000>,
 		      <0x0 0x01c03000 0x0 0x1000>,
 		      <0x0 0x40005000 0x0 0x2000>;
 		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
@@ -6127,7 +8405,6 @@
 		power-domains = <&gcc PCIE_0_GDSC>;
 		phys = <&pcie0_phy>;
 		phy-names = "pciephy";
-		max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
 		num-lanes = <2>;
 		linux,pci-domain = <0>;
 
@@ -6138,16 +8415,18 @@
 		compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
 		reg = <0x0 0x1c04000 0x0 0x2000>;
 
-		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+		clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>,
 			 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 			 <&gcc GCC_PCIE_CLKREF_EN>,
 			 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
 			 <&gcc GCC_PCIE_0_PIPE_CLK>,
-			 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
-			 <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
-
-		clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
-			      "pipediv2", "phy_aux";
+			 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>;
+		clock-names = "aux",
+			      "cfg_ahb",
+			      "ref",
+			      "rchng",
+			      "pipe",
+			      "pipediv2";
 
 		assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
 		assigned-clock-rates = <100000000>;
@@ -6192,9 +8471,17 @@
 			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi0", "msi1", "msi2", "msi3",
-				  "msi4", "msi5", "msi6", "msi7";
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi0",
+				  "msi1",
+				  "msi2",
+				  "msi3",
+				  "msi4",
+				  "msi5",
+				  "msi6",
+				  "msi7",
+				  "global";
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0x7>;
 		interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
@@ -6224,13 +8511,19 @@
 		iommu-map = <0x0 &pcie_smmu 0x0080 0x1>,
 			    <0x100 &pcie_smmu 0x0081 0x1>;
 
-		resets = <&gcc GCC_PCIE_1_BCR>;
-		reset-names = "pci";
+		resets = <&gcc GCC_PCIE_1_BCR>,
+			 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+		reset-names = "pci",
+			      "link_down";
+
 		power-domains = <&gcc PCIE_1_GDSC>;
 
 		phys = <&pcie1_phy>;
 		phy-names = "pciephy";
 
+		eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
+		eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
+
 		status = "disabled";
 
 		pcie@0 {
@@ -6250,7 +8543,7 @@
 		      <0x0 0x60000000 0x0 0xf20>,
 		      <0x0 0x60000f20 0x0 0xa8>,
 		      <0x0 0x60001000 0x0 0x4000>,
-		      <0x0 0x60200000 0x0 0x100000>,
+		      <0x0 0x60200000 0x0 0x1fe00000>,
 		      <0x0 0x01c13000 0x0 0x1000>,
 		      <0x0 0x60005000 0x0 0x2000>;
 		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
@@ -6285,7 +8578,6 @@
 		power-domains = <&gcc PCIE_1_GDSC>;
 		phys = <&pcie1_phy>;
 		phy-names = "pciephy";
-		max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
 		num-lanes = <4>;
 		linux,pci-domain = <1>;
 
@@ -6296,16 +8588,18 @@
 		compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
 		reg = <0x0 0x1c14000 0x0 0x4000>;
 
-		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+		clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
 			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 			 <&gcc GCC_PCIE_CLKREF_EN>,
 			 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
 			 <&gcc GCC_PCIE_1_PIPE_CLK>,
-			 <&gcc GCC_PCIE_1_PIPEDIV2_CLK>,
-			 <&gcc GCC_PCIE_1_PHY_AUX_CLK>;
-
-		clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
-			      "pipediv2", "phy_aux";
+			 <&gcc GCC_PCIE_1_PIPEDIV2_CLK>;
+		clock-names = "aux",
+			      "cfg_ahb",
+			      "ref",
+			      "rchng",
+			      "pipe",
+			      "pipediv2";
 
 		assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
 		assigned-clock-rates = <100000000>;
diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts
new file mode 100644
index 000000000000..bb35893da73d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "monaco.dtsi"
+#include "monaco-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Monaco EVK";
+	compatible = "qcom,monaco-evk", "qcom,qcs8300";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		i2c1 = &i2c1;
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dmic: audio-codec-0 {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <1>;
+	};
+
+	max98357a: audio-codec-1 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "qcom,qcs8275-sndcard";
+		model = "MONACO-EVK";
+
+		pinctrl-0 = <&hs0_mi2s_active>, <&mi2s1_active>;
+		pinctrl-names = "default";
+
+		hs0-mi2s-playback-dai-link {
+			link-name = "HS0 MI2S Playback";
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		sec-mi2s-capture-dai-link {
+			link-name = "Secondary MI2S Capture";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai SECONDARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s5c: smps5 {
+			regulator-name = "vreg_s5c";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <512000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-mode = "2500base-x";
+	phy-handle = <&hsgmii_phy0>;
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	nvmem-cells = <&mac_addr0>;
+	nvmem-cell-names = "mac-address";
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy0: ethernet-phy@1c {
+			compatible = "ethernet-phy-id004d.d101";
+			reg = <0x1c>;
+			reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcs8300/a623_zap.mbn";
+};
+
+&i2c1 {
+	pinctrl-0 = <&qup_i2c1_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_addr0: mac-addr@0 {
+				reg = <0x0 0x6>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	pinctrl-0 = <&qup_i2c15_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	expander0: gpio@38 {
+		compatible = "ti,tca9538";
+		reg = <0x38>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander1: gpio@39 {
+		compatible = "ti,tca9538";
+		reg = <0x39>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander2: gpio@3a {
+		compatible = "ti,tca9538";
+		reg = <0x3a>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander3: gpio@3b {
+		compatible = "ti,tca9538";
+		reg = <0x3b>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander4: gpio@3c {
+		compatible = "ti,tca9538";
+		reg = <0x3c>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander5: gpio@3d {
+		compatible = "ti,tca9538";
+		reg = <0x3d>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander6: gpio@3e {
+		compatible = "ti,tca9538";
+		reg = <0x3e>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&iris {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	firmware-name = "qcom/qcs8300/qupv3fw.elf";
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	firmware-name = "qcom/qcs8300/qupv3fw.elf";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs8300/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs8300/cdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp {
+	firmware-name = "qcom/qcs8300/gpdsp0.mbn";
+
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio5";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio6";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	qup_i2c1_default: qup-i2c1-state {
+		pins = "gpio19", "gpio20";
+		function = "qup0_se1";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_i2c15_default: qup-i2c15-state {
+		pins = "gpio91", "gpio92";
+		function = "qup1_se7";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi b/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi
new file mode 100644
index 000000000000..e990d7367719
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmm8620au_0: pmic@0 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8620au_0_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pmm8620au_0_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8620au_0_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8650au_1: pmic@2 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8650au_1_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8650au_1_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
new file mode 100644
index 000000000000..816fa2af8a9a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
@@ -0,0 +1,6230 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,qcs8300-gcc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
+#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <472>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <472>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_2>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <507>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu2_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+
+			l2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_3>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <507>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu2_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
+
+			l2_3: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&l2_4>;
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+
+			l2_4: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_5>;
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+
+			l2_5: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_6>;
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+
+			l2_6: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_7>;
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
+
+			l2_7: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		l3_0: l3-cache-0 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+
+		l3_1: l3-cache-1 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			little_cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <449>;
+				exit-latency-us = <801>;
+				min-residency-us = <1574>;
+				local-timer-stop;
+			};
+
+			little_cpu_sleep_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <602>;
+				exit-latency-us = <961>;
+				min-residency-us = <4288>;
+				local-timer-stop;
+			};
+
+			big_cpu_sleep_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			big_cpu_sleep_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			silver_cluster_sleep: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2552>;
+				exit-latency-us = <2848>;
+				min-residency-us = <5908>;
+			};
+
+			gold_cluster_sleep: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			system_sleep: domain-sleep {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x42000144>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(1017600 * 4) (921600 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+	};
+
+	cpu2_opp_table: opp-table-cpu2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			opp-peak-kBps = <(1017600 * 4) (921600 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+		};
+
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2284800000 {
+			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+		};
+
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+		};
+
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+		};
+
+		opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+	};
+
+	dummy_eud: dummy-sink {
+		compatible = "arm,coresight-dummy-sink";
+
+		in-ports {
+			port {
+				eud_in: endpoint {
+					remote-endpoint = <&swao_rep_out1>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-qcs8300", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,qcs8300-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,qcs8300-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd0>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd1>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cluster_pd0: power-domain-cluster0 {
+			#power-domain-cells = <0>;
+			power-domains = <&system_pd>;
+			domain-idle-states = <&gold_cluster_sleep>;
+		};
+
+		cluster_pd1: power-domain-cluster1 {
+			#power-domain-cells = <0>;
+			power-domains = <&system_pd>;
+			domain-idle-states = <&silver_cluster_sleep>;
+		};
+
+		system_pd: power-domain-system {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&system_sleep>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_image_mem: aop-image-region@90800000 {
+			reg = <0x0 0x90800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-region@90860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x90860000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: smem@90900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x90900000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		lpass_machine_learning_mem: lpass-machine-learning-region@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0xf00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap-region@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x800000>;
+			no-map;
+		};
+
+		camera_mem: camera-region@95200000 {
+			reg = <0x0 0x95200000 0x0 0x500000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@95c00000 {
+			no-map;
+			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb-region@97a00000 {
+			reg = <0x0 0x97a00000 0x0 0x80000>;
+			no-map;
+		};
+
+		q6_gpdsp_dtb_mem: q6-gpdsp-dtb-region@97a80000 {
+			reg = <0x0 0x97a80000 0x0 0x80000>;
+			no-map;
+		};
+
+		gpdsp_mem: gpdsp-region@97b00000 {
+			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@99900000 {
+			reg = <0x0 0x99900000 0x0 0x80000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@99980000 {
+			reg = <0x0 0x99980000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode-region@9b780000 {
+			reg = <0x0 0x9b780000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp-region@9b782000 {
+			reg = <0x0 0x9b782000 0x0 0x700000>;
+			no-map;
+		};
+
+		video_mem: video-region@9be82000 {
+			reg = <0x0 0x9be82000 0x0 0x700000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	smp2p-gpdsp {
+		compatible = "qcom,smp2p";
+		interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <617>, <616>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <17>;
+
+		smp2p_gpdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_gpdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x10 0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,qcs8300-gcc";
+			reg = <0x0 0x00100000 0x0 0xc7018>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,qcs8300-ipcc", "qcom,ipcc";
+			reg = <0x0 0x408000 0x0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,qcs8300-qfprom", "qcom,qfprom";
+			reg = <0x0 0x00784000 0x0 0x2410>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@240c {
+				reg = <0x240c 0x1>;
+				bits = <0 8>;
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x900000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x416 0x0>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x403 0x0>;
+			dma-coherent;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>,
+					    <&qup_uart0_tx>, <&qup_uart0_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart1: serial@984000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>,
+					    <&qup_uart1_tx>, <&qup_uart1_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart2: serial@988000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>,
+					    <&qup_uart2_tx>, <&qup_uart2_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart3: serial@98c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>,
+					    <&qup_uart3_tx>, <&qup_uart3_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@990000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>,
+					    <&qup_uart4_tx>, <&qup_uart4_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart5: serial@994000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>,
+					    <&qup_uart5_tx>, <&qup_uart5_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>,
+					    <&qup_uart6_tx>, <&qup_uart6_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x0099c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x456 0x0>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x443 0x0>;
+			dma-coherent;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>,
+					    <&qup_uart8_tx>, <&qup_uart8_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>,
+					    <&qup_uart9_tx>, <&qup_uart9_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart10: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>,
+					    <&qup_uart10_tx>, <&qup_uart10_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart11: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart11_tx>, <&qup_uart11_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>,
+					    <&qup_uart12_tx>, <&qup_uart12_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>,
+					    <&qup_uart13_tx>, <&qup_uart13_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart14: serial@a98000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>,
+					    <&qup_uart14_tx>, <&qup_uart14_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart15: serial@a9c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>,
+					    <&qup_uart15_tx>, <&qup_uart15_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma3: dma-controller@b00000 {
+			compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0xb00000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			dma-channels = <4>;
+			dma-channel-mask = <0xf>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qupv3_id_3: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xbc0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			dma-coherent;
+			status = "disabled";
+
+			i2c16: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma3 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma3 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi16: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma3 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma3 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart16: serial@b80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart16_cts>, <&qup_uart16_rts>,
+					    <&qup_uart16_tx>, <&qup_uart16_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10d2000 {
+			compatible = "qcom,qcs8300-trng", "qcom,trng";
+			reg = <0x0 0x010d2000 0x0 0x1000>;
+		};
+
+		config_noc: interconnect@14c0000 {
+			compatible = "qcom,qcs8300-config-noc";
+			reg = <0x0 0x014c0000 0x0 0x13080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,qcs8300-system-noc";
+			reg = <0x0 0x01680000 0x0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16c0000 {
+			compatible = "qcom,qcs8300-aggre1-noc";
+			reg = <0x0 0x016c0000 0x0 0x17080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,qcs8300-aggre2-noc";
+			reg = <0x0 0x01700000 0x0 0x1a080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@1760000 {
+			compatible = "qcom,qcs8300-pcie-anoc";
+			reg = <0x0 0x01760000 0x0 0xc080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gpdsp_anoc: interconnect@1780000 {
+			compatible = "qcom,qcs8300-gpdsp-anoc";
+			reg = <0x0 0x01780000 0x0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@17a0000 {
+			compatible = "qcom,qcs8300-mmss-noc";
+			reg = <0x0 0x017a0000 0x0 0x40000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x100 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			qcom,ice = <&ice>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,qcs8300-qmp-ufs-phy", "qcom,sa8775p-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe10>;
+			/*
+			 * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
+			 * enables the CXO clock to eDP *and* UFS PHY.
+			 */
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_EDP_REF_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <20>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x480 0x00>,
+				 <&apps_smmu 0x481 0x00>;
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,qcs8300-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x18000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,qcs8300-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,qcs8300-adsp-pas", "qcom,sa8775p-adsp-pas";
+			reg = <0x0 0x3000000 0x0 0x00100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					memory-region = <&adsp_rpc_remote_heap_mem>;
+					qcom,vmids = <QCOM_SCM_VMID_LPASS
+						      QCOM_SCM_VMID_ADSP_HEAP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2003 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2004 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2005 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x2001 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,qcs8300-lpass-ag-noc";
+			reg = <0x0 0x03c40000 0x0 0x17200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		stm@4002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x04002000 0x0 0x1000>,
+			      <0x0 0x16280000 0x0 0x180000>;
+			reg-names = "stm-base",
+				    "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		tpda@4004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04004000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					qdss_tpda_in1: endpoint {
+						remote-endpoint = <&qdss_tpdm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_tpda_out: endpoint {
+						remote-endpoint = <&funnel0_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@400f000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x0400f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					qdss_tpdm1_out: endpoint {
+						remote-endpoint = <&qdss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@4041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04041000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					funnel0_in6: endpoint {
+						remote-endpoint = <&qdss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&qdss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+
+					funnel1_in4: endpoint {
+						remote-endpoint = <&apss_funnel1_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					funnel1_in5: endpoint {
+						remote-endpoint = <&dlct0_funnel_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					funnel1_in6: endpoint {
+						remote-endpoint = <&dlmm_funnel_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel1_in7: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&qdss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@4045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					qdss_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					qdss_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					qdss_funnel_out: endpoint {
+						remote-endpoint = <&aoss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@4841000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04841000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					prng_tpdm_out: endpoint {
+						remote-endpoint = <&dlct0_tpda_in19>;
+					};
+				};
+			};
+		};
+
+		tpdm@4850000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04850000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					pimem_tpdm_out: endpoint {
+						remote-endpoint = <&dlct0_tpda_in25>;
+					};
+				};
+			};
+		};
+
+		tpdm@4860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlst_ch_tpdm0_out: endpoint {
+						remote-endpoint = <&dlst_ch_tpda_in8>;
+					};
+				};
+			};
+		};
+
+		tpda@4864000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04864000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+
+					dlst_ch_tpda_in8: endpoint {
+						remote-endpoint = <&dlst_ch_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_ch_tpda_out: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4865000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04865000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					dlst_ch_funnel_in0: endpoint {
+						remote-endpoint = <&dlst_ch_tpda_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					dlst_ch_funnel_in4: endpoint {
+						remote-endpoint = <&dlst_funnel_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					dlst_ch_funnel_in6: endpoint {
+						remote-endpoint = <&gdsp_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_ch_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@4980000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04980000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					turing2_tpdm_out: endpoint {
+						remote-endpoint = <&turing2_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4983000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04983000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					turing2_funnel_in0: endpoint {
+						remote-endpoint = <&turing2_tpdm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					turing2_funnel_out0: endpoint {
+						remote-endpoint = <&gdsp_tpda_in5>;
+					};
+				};
+			};
+		};
+
+		tpdm@4ac0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04ac0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlmm_tpdm0_out: endpoint {
+						remote-endpoint = <&dlmm_tpda_in27>;
+					};
+				};
+			};
+		};
+
+		tpda@4ac4000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04ac4000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1b {
+					reg = <27>;
+
+					dlmm_tpda_in27: endpoint {
+						remote-endpoint = <&dlmm_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlmm_tpda_out: endpoint {
+						remote-endpoint = <&dlmm_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4ac5000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04ac5000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					dlmm_funnel_in0: endpoint {
+						remote-endpoint = <&dlmm_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlmm_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@4ad0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04ad0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlct0_tpdm0_out: endpoint {
+						remote-endpoint = <&dlct0_tpda_in26>;
+					};
+				};
+			};
+		};
+
+		tpda@4ad3000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04ad3000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@13 {
+					reg = <19>;
+
+					dlct0_tpda_in19: endpoint {
+						remote-endpoint = <&prng_tpdm_out>;
+					};
+				};
+
+				port@19 {
+					reg = <25>;
+
+					dlct0_tpda_in25: endpoint {
+						remote-endpoint = <&pimem_tpdm_out>;
+					};
+				};
+
+				port@1a {
+					reg = <26>;
+
+					dlct0_tpda_in26: endpoint {
+						remote-endpoint = <&dlct0_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlct0_tpda_out: endpoint {
+						remote-endpoint = <&dlct0_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4ad4000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04ad4000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					dlct0_funnel_in0: endpoint {
+						remote-endpoint = <&dlct0_tpda_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					dlct0_funnel_in4: endpoint {
+						remote-endpoint = <&ddr_funnel5_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlct0_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in5>;
+					};
+				};
+			};
+		};
+
+		funnel@4b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					aoss_funnel_in6: endpoint {
+						remote-endpoint = <&aoss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					aoss_funnel_in7: endpoint {
+						remote-endpoint = <&qdss_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					aoss_funnel_out: endpoint {
+						remote-endpoint = <&etf0_in>;
+					};
+				};
+			};
+		};
+
+		tmc_etf: tmc@4b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x04b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf0_in: endpoint {
+						remote-endpoint = <&aoss_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf0_out: endpoint {
+						remote-endpoint = <&swao_rep_in>;
+					};
+				};
+			};
+		};
+
+		replicator@4b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x04b06000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					swao_rep_in: endpoint {
+						remote-endpoint = <&etf0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					swao_rep_out1: endpoint {
+						remote-endpoint = <&eud_in>;
+					};
+				};
+			};
+		};
+
+		tpda@4b08000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04b08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					aoss_tpda_in0: endpoint {
+						remote-endpoint = <&aoss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					aoss_tpda_in1: endpoint {
+						remote-endpoint = <&aoss_tpdm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					aoss_tpda_in2: endpoint {
+						remote-endpoint = <&aoss_tpdm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					aoss_tpda_in3: endpoint {
+						remote-endpoint = <&aoss_tpdm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					aoss_tpda_in4: endpoint {
+						remote-endpoint = <&aoss_tpdm4_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					aoss_tpda_out: endpoint {
+						remote-endpoint = <&aoss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b09000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b09000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm0_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0a000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm1_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0b000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm2_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm3_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0d000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b0d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm4_out: endpoint {
+						remote-endpoint = <&aoss_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		cti@4b13000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x04b13000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@4b80000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04b80000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					turing0_tpdm0_out: endpoint {
+						remote-endpoint = <&turing0_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpda@4b86000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04b86000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					turing0_tpda_in0: endpoint {
+						remote-endpoint = <&turing0_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					turing0_tpda_out: endpoint {
+						remote-endpoint = <&turing0_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4b87000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04b87000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					turing0_funnel_in0: endpoint {
+						remote-endpoint = <&turing0_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					turing0_funnel_out: endpoint {
+						remote-endpoint = <&gdsp_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		cti@4b8b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x04b8b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@4c40000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04c40000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					gdsp_tpdm0_out: endpoint {
+						remote-endpoint = <&gdsp_tpda_in8>;
+					};
+				};
+			};
+		};
+
+		tpda@4c44000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04c44000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@5 {
+					reg = <5>;
+
+					gdsp_tpda_in5: endpoint {
+						remote-endpoint = <&turing2_funnel_out0>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+
+					gdsp_tpda_in8: endpoint {
+						remote-endpoint = <&gdsp_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					gdsp_tpda_out: endpoint {
+						remote-endpoint = <&gdsp_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4c45000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04c45000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					gdsp_funnel_in0: endpoint {
+						remote-endpoint = <&gdsp_tpda_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					gdsp_funnel_in4: endpoint {
+						remote-endpoint = <&turing0_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					gdsp_funnel_out: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		tpdm@4c50000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04c50000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					dlst_tpdm0_out: endpoint {
+						remote-endpoint = <&dlst_tpda_in8>;
+					};
+				};
+			};
+		};
+
+		tpda@4c54000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04c54000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@8 {
+					reg = <8>;
+
+					dlst_tpda_in8: endpoint {
+						remote-endpoint = <&dlst_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_tpda_out: endpoint {
+						remote-endpoint = <&dlst_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4c55000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04c55000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					dlst_funnel_in0: endpoint {
+						remote-endpoint = <&dlst_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					dlst_funnel_out: endpoint {
+						remote-endpoint = <&dlst_ch_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@4e00000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04e00000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					ddr_tpdm3_out: endpoint {
+						remote-endpoint = <&ddr_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		tpda@4e03000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x04e03000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ddr_tpda_in0: endpoint {
+						remote-endpoint = <&ddr_funnel0_out0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ddr_tpda_in1: endpoint {
+						remote-endpoint = <&ddr_funnel1_out0>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					ddr_tpda_in4: endpoint {
+						remote-endpoint = <&ddr_tpdm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_tpda_out: endpoint {
+						remote-endpoint = <&ddr_funnel5_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4e04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04e04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					ddr_funnel5_in0: endpoint {
+						remote-endpoint = <&ddr_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_funnel5_out: endpoint {
+						remote-endpoint = <&dlct0_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@4e10000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04e10000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					ddr_tpdm0_out: endpoint {
+						remote-endpoint = <&ddr_funnel0_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4e12000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04e12000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					ddr_funnel0_in0: endpoint {
+						remote-endpoint = <&ddr_tpdm0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_funnel0_out0: endpoint {
+						remote-endpoint = <&ddr_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@4e20000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x04e20000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					ddr_tpdm1_out: endpoint {
+						remote-endpoint = <&ddr_funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@4e22000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x04e22000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					ddr_funnel1_in0: endpoint {
+						remote-endpoint = <&ddr_tpdm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ddr_funnel1_out0: endpoint {
+						remote-endpoint = <&ddr_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		etm@6040000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06040000 0x0 0x1000>;
+			cpu = <&cpu0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in0>;
+					};
+				};
+			};
+		};
+
+		etm@6140000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06140000 0x0 0x1000>;
+			cpu = <&cpu1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in1>;
+					};
+				};
+			};
+		};
+
+		etm@6240000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06240000 0x0 0x1000>;
+			cpu = <&cpu2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in2>;
+					};
+				};
+			};
+		};
+
+		etm@6340000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06340000 0x0 0x1000>;
+			cpu = <&cpu3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in3>;
+					};
+				};
+			};
+		};
+
+		etm@6440000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06440000 0x0 0x1000>;
+			cpu = <&cpu4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in4>;
+					};
+				};
+			};
+		};
+
+		etm@6540000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06540000 0x0 0x1000>;
+			cpu = <&cpu5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in5>;
+					};
+				};
+			};
+		};
+
+		etm@6640000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06640000 0x0 0x1000>;
+			cpu = <&cpu6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in6>;
+					};
+				};
+			};
+		};
+
+		etm@6740000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x06740000 0x0 0x1000>;
+			cpu = <&cpu7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06800000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					apss_funnel0_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					apss_funnel0_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					apss_funnel0_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					apss_funnel0_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					apss_funnel0_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					apss_funnel0_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					apss_funnel0_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					apss_funnel0_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_funnel0_out: endpoint {
+						remote-endpoint = <&apss_funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@6810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06810000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					apss_funnel1_in0: endpoint {
+						remote-endpoint = <&apss_funnel0_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					apss_funnel1_in3: endpoint {
+						remote-endpoint = <&apss_tpda_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_funnel1_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+		};
+
+		cti@682b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0682b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@6860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm3_out: endpoint {
+						remote-endpoint = <&apss_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@6861000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06861000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm4_out: endpoint {
+						remote-endpoint = <&apss_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		tpda@6863000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x06863000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					apss_tpda_in0: endpoint {
+						remote-endpoint = <&apss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					apss_tpda_in1: endpoint {
+						remote-endpoint = <&apss_tpdm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					apss_tpda_in2: endpoint {
+						remote-endpoint = <&apss_tpdm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					apss_tpda_in3: endpoint {
+						remote-endpoint = <&apss_tpdm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					apss_tpda_in4: endpoint {
+						remote-endpoint = <&apss_tpdm4_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_tpda_out: endpoint {
+						remote-endpoint = <&apss_funnel1_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@68a0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x068a0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm1_out: endpoint {
+						remote-endpoint = <&apss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@68b0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x068b0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm0_out: endpoint {
+						remote-endpoint = <&apss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@68c0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x068c0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm2_out: endpoint {
+						remote-endpoint = <&apss_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		cti@68e0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x068e0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@68f0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x068f0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6900000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06900000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		sdhc_1: mmc@87c4000 {
+			compatible = "qcom,qcs8300-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x087c4000 0x0 0x1000>,
+			      <0x0 0x087c5000 0x0 0x1000>;
+			reg-names = "hc",
+				    "cqhci";
+
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x0 0x0>;
+			interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			qcom,dll-config = <0x000f64ee>;
+			qcom,ddr-config = <0x80040868>;
+			supports-cqe;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@8904000 {
+			compatible = "qcom,qcs8300-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x0 0x08904000 0x0 0x400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy: phy@8906000 {
+			compatible = "qcom,qcs8300-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x0 0x08906000 0x0 0x400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@8907000 {
+			compatible = "qcom,qcs8300-qmp-usb3-uni-phy";
+			reg = <0x0 0x08907000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_prim_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		serdes0: phy@8909000 {
+			compatible = "qcom,qcs8300-dwmac-sgmii-phy", "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0x0 0x08909000 0x0 0x00000e10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		refgen: regulator@891c000 {
+			compatible = "qcom,qcs8300-refgen-regulator",
+				     "qcom,sm8250-refgen-regulator";
+			reg = <0x0 0x0891c000 0x0 0x84>;
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-623.0", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0 0xc00>,
+				 <&adreno_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_microcode_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-877000000 {
+					opp-hz = /bits/ 64 <877000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <12484375>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-780000000 {
+					opp-hz = /bits/ 64 <780000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <10687500>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-599000000 {
+					opp-hz = /bits/ 64 <599000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <8171875>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-479000000 {
+					opp-hz = /bits/ 64 <479000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5285156>;
+					opp-supported-hw = <0x3>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-623.0", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x34000>,
+			      <0x0 0x03de0000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&adreno_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,qcs8300-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,qcs8300-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x3da0000 0x0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,qcs8300-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x9091000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2601000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <7984000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <12195000>;
+				};
+			};
+		};
+
+		pmu@90b5400 {
+			compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x90b5400 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x90b6400 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
+		dc_noc: interconnect@90e0000 {
+			compatible = "qcom,qcs8300-dc-noc";
+			reg = <0x0 0x090e0000 0x0 0x5080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9100000 {
+			compatible = "qcom,qcs8300-gem-noc";
+			reg = <0x0 0x9100000 0x0 0xf7080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		llcc: system-cache-controller@9200000 {
+			compatible = "qcom,qcs8300-llcc";
+			reg = <0x0 0x09200000 0x0 0x80000>,
+			      <0x0 0x09300000 0x0 0x80000>,
+			      <0x0 0x09400000 0x0 0x80000>,
+			      <0x0 0x09500000 0x0 0x80000>,
+			      <0x0 0x09a00000 0x0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb_1: usb@a600000 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+			phy-names = "usb2-phy", "usb3-phy";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+
+			wakeup-source;
+
+			status = "disabled";
+		};
+
+		usb_2: usb@a400000 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a400000 0x0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			iommus = <&apps_smmu 0x20 0x0>;
+
+			phys = <&usb_2_hsphy>;
+			phy-names = "usb2-phy";
+			maximum-speed = "high-speed";
+
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+
+			qcom,select-utmi-as-pipe-clk;
+			wakeup-source;
+
+			status = "disabled";
+		};
+
+		iris: video-codec@aa00000 {
+			compatible = "qcom,qcs8300-iris";
+
+			reg = <0x0 0x0aa00000 0x0 0xf0000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MX>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+			reset-names = "bus";
+
+			iommus = <&apps_smmu 0x0880 0x0400>,
+				 <&apps_smmu 0x0887 0x0400>;
+			dma-coherent;
+
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-533000000 {
+					opp-hz = /bits/ 64 <533000000>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					required-opps = <&rpmhpd_opp_turbo_l1>,
+							<&rpmhpd_opp_turbo_l1>;
+				};
+			};
+		};
+
+		videocc: clock-controller@abf0000 {
+			compatible = "qcom,qcs8300-videocc";
+			reg = <0x0 0x0abf0000 0x0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,qcs8300-camcc";
+			reg = <0x0 0x0ade0000 0x0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sa8775p-dispcc0";
+			reg = <0x0 0x0af00000 0x0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <0>, <0>, <0>, <0>,
+				 <0>, <0>, <0>, <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,qcs8300-pdc", "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			qcom,pdc-ranges = <0 480 40>,
+					  <40 140 14>,
+					  <54 263 1>,
+					  <55 306 4>,
+					  <59 312 3>,
+					  <62 374 2>,
+					  <64 434 2>,
+					  <66 438 2>,
+					  <70 520 1>,
+					  <73 523 1>,
+					  <118 568 6>,
+					  <124 609 3>,
+					  <159 638 1>,
+					  <160 720 3>,
+					  <169 728 30>,
+					  <199 416 2>,
+					  <201 449 1>,
+					  <202 89 1>,
+					  <203 451 1>,
+					  <204 462 1>,
+					  <205 264 1>,
+					  <206 579 1>,
+					  <207 653 1>,
+					  <208 656 1>,
+					  <209 659 1>,
+					  <210 122 1>,
+					  <211 699 1>,
+					  <212 705 1>,
+					  <213 450 1>,
+					  <214 643 2>,
+					  <216 646 5>,
+					  <221 390 5>,
+					  <226 700 2>,
+					  <228 440 1>,
+					  <229 663 1>,
+					  <230 524 2>,
+					  <232 612 3>,
+					  <235 723 5>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,qcs8300-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+					       IPCC_MPROC_SIGNAL_GLINK_QMP
+					       IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,qcs8300-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 134>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			hs0_mi2s_active: hs0-mi2s-active-state {
+				pins = "gpio106", "gpio107", "gpio108", "gpio109";
+				function = "hs0_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			mi2s1_active: mi2s1-active-state {
+				data0-pins {
+					pins = "gpio100";
+					function = "mi2s1_data0";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				data1-pins {
+					pins = "gpio101";
+					function = "mi2s1_data1";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				sclk-pins {
+					pins = "gpio98";
+					function = "mi2s1_sck";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				ws-pins {
+					pins = "gpio99";
+					function = "mi2s1_ws";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				pins = "gpio17", "gpio18";
+				function = "qup0_se0";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio19", "gpio20";
+				function = "qup0_se1";
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio33", "gpio34";
+				function = "qup0_se2";
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio25", "gpio26";
+				function = "qup0_se3";
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio29", "gpio30";
+				function = "qup0_se4";
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio21", "gpio22";
+				function = "qup0_se5";
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio80", "gpio81";
+				function = "qup0_se6";
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				pins = "gpio37", "gpio38";
+				function = "qup1_se0";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				pins = "gpio39", "gpio40";
+				function = "qup1_se1";
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				pins = "gpio84", "gpio85";
+				function = "qup1_se2";
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				pins = "gpio41", "gpio42";
+				function = "qup1_se3";
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				pins = "gpio45", "gpio46";
+				function = "qup1_se4";
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				pins = "gpio49", "gpio50";
+				function = "qup1_se5";
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				pins = "gpio89", "gpio90";
+				function = "qup1_se6";
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				pins = "gpio91", "gpio92";
+				function = "qup1_se7";
+			};
+
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				pins = "gpio10", "gpio11";
+				function = "qup2_se0";
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				pins = "gpio17", "gpio18", "gpio19";
+				function = "qup0_se0";
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio20";
+				function = "qup0_se0";
+			};
+
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio20";
+				function = "gpio";
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio19", "gpio20", "gpio17";
+				function = "qup0_se1";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio18";
+				function = "qup0_se1";
+			};
+
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio18";
+				function = "gpio";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio33", "gpio34", "gpio35";
+				function = "qup0_se2";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio36";
+				function = "qup0_se2";
+			};
+
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
+				pins = "gpio36";
+				function = "gpio";
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio25", "gpio26", "gpio27";
+				function = "qup0_se3";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio28";
+				function = "qup0_se3";
+			};
+
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio28";
+				function = "gpio";
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio29", "gpio30", "gpio31";
+				function = "qup0_se4";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio32";
+				function = "qup0_se4";
+			};
+
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
+				pins = "gpio32";
+				function = "gpio";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio21", "gpio22", "gpio23";
+				function = "qup0_se5";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio24";
+				function = "qup0_se5";
+			};
+
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio24";
+				function = "gpio";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup0_se6";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio83";
+				function = "qup0_se6";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio83";
+				function = "gpio";
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				pins = "gpio37", "gpio38", "gpio39";
+				function = "qup1_se0";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio40";
+				function = "qup1_se0";
+			};
+
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio40";
+				function = "gpio";
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio39", "gpio40", "gpio37";
+				function = "qup1_se1";
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio38";
+				function = "qup1_se1";
+			};
+
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
+				pins = "gpio38";
+				function = "gpio";
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio84", "gpio85", "gpio86";
+				function = "qup1_se2";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio87";
+				function = "qup1_se2";
+			};
+
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio87";
+				function = "gpio";
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio45", "gpio46", "gpio47";
+				function = "qup1_se4";
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio48";
+				function = "qup1_se4";
+			};
+
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
+				pins = "gpio48";
+				function = "gpio";
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio49", "gpio50", "gpio51";
+				function = "qup1_se5";
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio52";
+				function = "qup1_se5";
+			};
+
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
+				pins = "gpio52";
+				function = "gpio";
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio89", "gpio90", "gpio91";
+				function = "qup1_se6";
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio92";
+				function = "qup1_se6";
+			};
+
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
+				pins = "gpio92";
+				function = "gpio";
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio91", "gpio92", "gpio89";
+				function = "qup1_se7";
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio90";
+				function = "qup1_se7";
+			};
+
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
+				pins = "gpio90";
+				function = "gpio";
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				pins = "gpio10", "gpio11", "gpio12";
+				function = "qup2_se0";
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio13";
+				function = "qup2_se0";
+			};
+
+			qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
+				pins = "gpio13";
+				function = "gpio";
+			};
+
+			qup_uart0_cts: qup-uart0-cts-state {
+				pins = "gpio17";
+				function = "qup0_se0";
+			};
+
+			qup_uart0_rts: qup-uart0-rts-state {
+				pins = "gpio18";
+				function = "qup0_se0";
+			};
+
+			qup_uart0_tx: qup-uart0-tx-state {
+				pins = "gpio19";
+				function = "qup0_se0";
+			};
+
+			qup_uart0_rx: qup-uart0-rx-state {
+				pins = "gpio20";
+				function = "qup0_se0";
+			};
+
+			qup_uart1_cts: qup-uart1-cts-state {
+				pins = "gpio19";
+				function = "qup0_se1";
+			};
+
+			qup_uart1_rts: qup-uart1-rts-state {
+				pins = "gpio20";
+				function = "qup0_se1";
+			};
+
+			qup_uart1_tx: qup-uart1-tx-state {
+				pins = "gpio17";
+				function = "qup0_se1";
+			};
+
+			qup_uart1_rx: qup-uart1-rx-state {
+				pins = "gpio18";
+				function = "qup0_se1";
+			};
+
+			qup_uart2_cts: qup-uart2-cts-state {
+				pins = "gpio33";
+				function = "qup0_se2";
+			};
+
+			qup_uart2_rts: qup-uart2-rts-state {
+				pins = "gpio34";
+				function = "qup0_se2";
+			};
+
+			qup_uart2_tx: qup-uart2-tx-state {
+				pins = "gpio35";
+				function = "qup0_se2";
+			};
+
+			qup_uart2_rx: qup-uart2-rx-state {
+				pins = "gpio36";
+				function = "qup0_se2";
+			};
+
+			qup_uart3_cts: qup-uart3-cts-state {
+				pins = "gpio25";
+				function = "qup0_se3";
+			};
+
+			qup_uart3_rts: qup-uart3-rts-state {
+				pins = "gpio26";
+				function = "qup0_se3";
+			};
+
+			qup_uart3_tx: qup-uart3-tx-state {
+				pins = "gpio27";
+				function = "qup0_se3";
+			};
+
+			qup_uart3_rx: qup-uart3-rx-state {
+				pins = "gpio28";
+				function = "qup0_se3";
+			};
+
+			qup_uart4_cts: qup-uart4-cts-state {
+				pins = "gpio29";
+				function = "qup0_se4";
+			};
+
+			qup_uart4_rts: qup-uart4-rts-state {
+				pins = "gpio30";
+				function = "qup0_se4";
+			};
+
+			qup_uart4_tx: qup-uart4-tx-state {
+				pins = "gpio31";
+				function = "qup0_se4";
+			};
+
+			qup_uart4_rx: qup-uart4-rx-state {
+				pins = "gpio32";
+				function = "qup0_se4";
+			};
+
+			qup_uart5_cts: qup-uart5-cts-state {
+				pins = "gpio21";
+				function = "qup0_se5";
+			};
+
+			qup_uart5_rts: qup-uart5-rts-state {
+				pins = "gpio22";
+				function = "qup0_se5";
+			};
+
+			qup_uart5_tx: qup-uart5-tx-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+			};
+
+			qup_uart5_rx: qup-uart5-rx-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+			};
+
+			qup_uart6_cts: qup-uart6-cts-state {
+				pins = "gpio80";
+				function = "qup0_se6";
+			};
+
+			qup_uart6_rts: qup-uart6-rts-state {
+				pins = "gpio81";
+				function = "qup0_se6";
+			};
+
+			qup_uart6_tx: qup-uart6-tx-state {
+				pins = "gpio82";
+				function = "qup0_se6";
+			};
+
+			qup_uart6_rx: qup-uart6-rx-state {
+				pins = "gpio83";
+				function = "qup0_se6";
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio43";
+				function = "qup0_se7";
+			};
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio44";
+				function = "qup0_se7";
+			};
+
+			qup_uart8_cts: qup-uart8-cts-state {
+				pins = "gpio37";
+				function = "qup1_se0";
+			};
+
+			qup_uart8_rts: qup-uart8-rts-state {
+				pins = "gpio38";
+				function = "qup1_se0";
+			};
+
+			qup_uart8_tx: qup-uart8-tx-state {
+				pins = "gpio39";
+				function = "qup1_se0";
+			};
+
+			qup_uart8_rx: qup-uart8-rx-state {
+				pins = "gpio40";
+				function = "qup1_se0";
+			};
+
+			qup_uart9_cts: qup-uart9-cts-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+			};
+
+			qup_uart9_rts: qup-uart9-rts-state {
+				pins = "gpio40";
+				function = "qup1_se1";
+			};
+
+			qup_uart9_tx: qup-uart9-tx-state {
+				pins = "gpio37";
+				function = "qup1_se1";
+			};
+
+			qup_uart9_rx: qup-uart9-rx-state {
+				pins = "gpio38";
+				function = "qup1_se1";
+			};
+
+			qup_uart10_cts: qup-uart10-cts-state {
+				pins = "gpio84";
+				function = "qup1_se2";
+			};
+
+			qup_uart10_rts: qup-uart10-rts-state {
+				pins = "gpio84";
+				function = "qup1_se2";
+			};
+
+			qup_uart10_tx: qup-uart10-tx-state {
+				pins = "gpio85";
+				function = "qup1_se2";
+			};
+
+			qup_uart10_rx: qup-uart10-rx-state {
+				pins = "gpio87";
+				function = "qup1_se2";
+			};
+
+			qup_uart11_tx: qup-uart11-tx-state {
+				pins = "gpio41";
+				function = "qup1_se3";
+			};
+
+			qup_uart11_rx: qup-uart11-rx-state {
+				pins = "gpio42";
+				function = "qup1_se3";
+			};
+
+			qup_uart12_cts: qup-uart12-cts-state {
+				pins = "gpio45";
+				function = "qup1_se4";
+			};
+
+			qup_uart12_rts: qup-uart12-rts-state {
+				pins = "gpio46";
+				function = "qup1_se4";
+			};
+
+			qup_uart12_tx: qup-uart12-tx-state {
+				pins = "gpio47";
+				function = "qup1_se4";
+			};
+
+			qup_uart12_rx: qup-uart12-rx-state {
+				pins = "gpio48";
+				function = "qup1_se4";
+			};
+
+			qup_uart13_cts: qup-uart13-cts-state {
+				pins = "gpio49";
+				function = "qup1_se5";
+			};
+
+			qup_uart13_rts: qup-uart13-rts-state {
+				pins = "gpio50";
+				function = "qup1_se5";
+			};
+
+			qup_uart13_tx: qup-uart13-tx-state {
+				pins = "gpio51";
+				function = "qup1_se5";
+			};
+
+			qup_uart13_rx: qup-uart13-rx-state {
+				pins = "gpio52";
+				function = "qup1_se5";
+			};
+
+			qup_uart14_cts: qup-uart14-cts-state {
+				pins = "gpio89";
+				function = "qup1_se6";
+			};
+
+			qup_uart14_rts: qup-uart14-rts-state {
+				pins = "gpio90";
+				function = "qup1_se6";
+			};
+
+			qup_uart14_tx: qup-uart14-tx-state {
+				pins = "gpio91";
+				function = "qup1_se6";
+			};
+
+			qup_uart14_rx: qup-uart14-rx-state {
+				pins = "gpio92";
+				function = "qup1_se6";
+			};
+
+			qup_uart15_cts: qup-uart15-cts-state {
+				pins = "gpio91";
+				function = "qup1_se7";
+			};
+
+			qup_uart15_rts: qup-uart15-rts-state {
+				pins = "gpio92";
+				function = "qup1_se7";
+			};
+
+			qup_uart15_tx: qup-uart15-tx-state {
+				pins = "gpio89";
+				function = "qup1_se7";
+			};
+
+			qup_uart15_rx: qup-uart15-rx-state {
+				pins = "gpio90";
+				function = "qup1_se7";
+			};
+
+			qup_uart16_cts: qup-uart16-cts-state {
+				pins = "gpio10";
+				function = "qup2_se0";
+			};
+
+			qup_uart16_rts: qup-uart16-rts-state {
+				pins = "gpio11";
+				function = "qup2_se0";
+			};
+
+			qup_uart16_tx: qup-uart16-tx-state {
+				pins = "gpio12";
+				function = "qup2_se0";
+			};
+
+			qup_uart16_rx: qup-uart16-rx-state {
+				pins = "gpio13";
+				function = "qup2_se0";
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-bus-hold;
+				};
+			};
+		};
+
+		sram: sram@146d8000 {
+			compatible = "qcom,qcs8300-imem", "syscon", "simple-mfd";
+			reg = <0x0 0x146d8000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x146d8000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI  98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI  99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie_smmu: iommu@15200000 {
+			compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15200000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+
+			interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a60000 0x0 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-qcs8300", "qcom,kpss-wdt";
+			reg = <0x0 0x17c10000 0x0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c27000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&system_pd>;
+			label = "apps_rsc";
+
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS 2>,
+					  <SLEEP_TCS 3>,
+					  <WAKE_TCS 3>,
+					  <CONTROL_TCS 0>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sa8775p-rpmh-clk";
+				#clock-cells = <1>;
+				clocks = <&xo_board_clk>;
+				clock-names = "xo";
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qcs8300-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-0 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp-2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp-3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		epss_l3_cl0: interconnect@18590000 {
+			compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18590000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,qcs8300-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0x0 0x18591000 0x0 0x1000>,
+			      <0x0 0x18593000 0x0 0x1000>,
+			      <0x0 0x18594000 0x0 0x1000>;
+			reg-names = "freq-domain0",
+				    "freq-domain1",
+				    "freq-domain2";
+
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+
+		epss_l3_cl1: interconnect@18592000 {
+			compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18592000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		remoteproc_gpdsp: remoteproc@20c00000 {
+			compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas";
+			reg = <0x0 0x20c00000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_gpdsp_in 0 0>,
+					      <&smp2p_gpdsp_in 1 0>,
+					      <&smp2p_gpdsp_in 2 0>,
+					      <&smp2p_gpdsp_in 3 0>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx",
+					     "mxc";
+
+			interconnects = <&gpdsp_anoc MASTER_DSP0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_CLK_CTL QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&gpdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_gpdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "gpdsp";
+				qcom,remote-pid = <17>;
+			};
+		};
+
+		ethernet0: ethernet@23040000 {
+			compatible = "qcom,qcs8300-ethqos", "qcom,sa8775p-ethqos";
+			reg = <0x0 0x23040000 0x0 0x00010000>,
+			      <0x0 0x23056000 0x0 0x00000100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "sfty";
+
+			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
+				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC0_PTP_CLK>,
+				 <&gcc GCC_EMAC0_PHY_AUX_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "phyaux";
+			power-domains = <&gcc GCC_EMAC0_GDSC>;
+
+			phys = <&serdes0>;
+			phy-names = "serdes";
+
+			iommus = <&apps_smmu 0x120 0xf>;
+			dma-coherent;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <20480>;
+
+			status = "disabled";
+		};
+
+		nspa_noc: interconnect@260c0000 {
+			compatible = "qcom,qcs8300-nspa-noc";
+			reg = <0x0 0x260c0000 0x0 0x16080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		remoteproc_cdsp: remoteproc@26300000 {
+			compatible = "qcom,qcs8300-cdsp-pas", "qcom,sa8775p-cdsp0-pas";
+			reg = <0x0 0x26300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP0>;
+
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			interconnects = <&nspa_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x19c1 0x0440>,
+							 <&apps_smmu 0x1961 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x19c2 0x0440>,
+							 <&apps_smmu 0x1962 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x19c3 0x0440>,
+							 <&apps_smmu 0x1963 0x0400>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x19c4 0x0440>,
+							 <&apps_smmu 0x1964 0x0400>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index b4ce14a79370..3a6eba904641 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -133,6 +133,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 3459145516a1..2de8b6f9531b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -214,6 +214,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &mpss_mem {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index 77618c7374df..29d61f8d5dc9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -130,6 +130,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &mpss_mem {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
index f7be7e371820..742a325245c5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -131,6 +131,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index bf7fc89dd106..aa414b5d7ee4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -214,6 +214,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &lpass {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts
index a823a1c40208..22bc73b94344 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-lg-c50.dts
@@ -59,6 +59,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
index 07345e694f6f..c50374979939 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-lg-m216.dts
@@ -112,6 +112,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 7f0c2c1b8a94..eb449112a226 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -254,6 +254,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &pm8916_bms {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 2cc54eaf7202..93d5ea279cff 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -79,6 +79,19 @@
 		};
 	};
 
+	reg_ts_vcca: regulator-vcca-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-vcca-ts";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&ts_vcca_default>;
+		pinctrl-names = "default";
+	};
+
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
@@ -176,8 +189,30 @@
 	};
 };
 
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "himax,hx8527e", "himax,hx852es";
+		reg = <0x48>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+		vcca-supply = <&reg_ts_vcca>;
+		vccd-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&ts_int_reset_default>;
+		pinctrl-names = "default";
+
+		linux,keycodes = <KEY_BACK KEY_HOMEPAGE KEY_APPSELECT>;
+	};
+};
+
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &mpss_mem {
@@ -335,6 +370,20 @@
 		bias-disable;
 	};
 
+	ts_int_reset_default: ts-int-reset-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_vcca_default: ts-vcca-default-state {
+		pins = "gpio78";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
index 039961622633..75103168c1fc 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
@@ -58,19 +58,19 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 		direction = <Q6ASM_DAI_RX>;
 	};
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 		direction = <Q6ASM_DAI_TX>;
 	};
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 		direction = <Q6ASM_DAI_RX>;
 	};
 	dai@3 {
-		reg = <3>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 		direction = <Q6ASM_DAI_RX>;
 		is-compress-dai;
 	};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi
index 6a27d0ecd2ad..4e202e7ed7db 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi
@@ -69,6 +69,9 @@
 };
 
 &blsp_uart1 {
+	pinctrl-0 = <&blsp_uart1_console_default>;
+	pinctrl-1 = <&blsp_uart1_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
@@ -129,14 +132,6 @@
 	status = "okay";
 };
 
-/* CTS/RTX are not used */
-&blsp_uart1_default {
-	pins = "gpio0", "gpio1";
-};
-&blsp_uart1_sleep {
-	pins = "gpio0", "gpio1";
-};
-
 &tlmm {
 	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
index c11a845e91bb..63d476523544 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
@@ -23,5 +23,8 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index e6355e5e2177..6f75707b6f9b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -302,6 +302,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &gpu {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
index 7a7e99b015d9..fb790b02736a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
@@ -304,6 +304,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
index fbd2caf405d5..ff9679d3f664 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -116,6 +116,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
index 5ca2ada266f4..697f25d51d9d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -135,6 +135,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &mpss_mem {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
index e7f265e3c2ab..e33453c3e51e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
@@ -5,7 +5,7 @@
 /* SM5504 MUIC instead of SM5502 */
 /delete-node/ &muic;
 
-/* Touchscreen varies depending on model variant */
+/* IST3038 instead of Zinitix BT541 */
 /delete-node/ &touchscreen;
 
 &blsp_i2c1 {
@@ -24,6 +24,26 @@
 	};
 };
 
+&blsp_i2c5 {
+	touchscreen: touchscreen@50 {
+		compatible = "imagis,ist3038";
+		reg = <0x50>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+
+		vdd-supply = <&reg_vdd_tsp_a>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+	};
+};
+
 /* On rossa backlight is controlled with MIPI DCS commands */
 &clk_pwm {
 	status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
index 3413b0970c4a..1981bb71f6a9 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts
@@ -16,26 +16,6 @@
 	constant-charge-voltage-max-microvolt = <4400000>;
 };
 
-&blsp_i2c5 {
-	touchscreen@50 {
-		compatible = "imagis,ist3038";
-		reg = <0x50>;
-
-		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
-
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <800>;
-
-		vdd-supply = <&reg_vdd_tsp_a>;
-		vddio-supply = <&pm8916_l6>;
-
-		pinctrl-0 = <&tsp_int_default>;
-		pinctrl-names = "default";
-
-		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
-	};
-};
-
 &mpss_mem {
 	/* Firmware for rossa needs more space */
 	reg = <0x0 0x86800000 0x0 0x5800000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index 5ce8f1350abc..71b5c98458ff 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -319,6 +319,44 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_default>;
+	pinctrl-1 = <&mdss_sleep>;
+
+	panel@0 {
+		compatible = "samsung,s6e88a0-ams427ap24";
+		reg = <0>;
+
+		vdd3-supply = <&pm8916_l17>;
+		vci-supply = <&pm8916_l6>;
+		reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+		flip-horizontal;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&panel_in>;
 };
 
 &mpss_mem {
@@ -330,6 +368,13 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
 &pm8916_vib {
 	status = "okay";
 };
@@ -425,6 +470,22 @@
 		bias-disable;
 	};
 
+	mdss_default: mdss-default-state {
+		pins = "gpio25";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_sleep: mdss-sleep-state {
+		pins = "gpio25";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	muic_i2c_default: muic-i2c-default-state {
 		pins = "gpio105", "gpio106";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
index c77ed04bb6c3..5719933fa8e0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
@@ -72,6 +72,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi
index 1a7c347dc3f0..ebe85cd85ddf 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi
@@ -93,6 +93,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 510b3b3c4e3c..68c8856d4c2e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -169,6 +169,9 @@
 
 &blsp_uart2 {
 	status = "okay";
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 };
 
 &mpss_mem {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5e558bcc9d87..d3a25a837488 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8916.h>
@@ -125,7 +126,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -1231,29 +1232,50 @@
 				bias-pull-down;
 			};
 
-			blsp_uart1_default: blsp-uart1-default-state {
-				/* TX, RX, CTS_N, RTS_N */
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "blsp_uart1";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart1_console_default: blsp-uart1-console-default-state {
+				tx-pins {
+					pins = "gpio0";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio1";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart1_sleep: blsp-uart1-sleep-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			blsp_uart1_console_sleep: blsp-uart1-console-sleep-state {
+				pins = "gpio0", "gpio1";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp_uart2_default: blsp-uart2-default-state {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart2_console_default: blsp-uart2-console-default-state {
+				tx-pins {
+					pins = "gpio4";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio5";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart2_sleep: blsp-uart2-sleep-state {
+			blsp_uart2_console_sleep: blsp-uart2-console-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "gpio";
 				drive-strength = <2>;
@@ -1497,8 +1519,8 @@
 			reg = <0x01800000 0x80000>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1540,6 +1562,8 @@
 
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 
+			resets = <&gcc GCC_MDSS_BCR>;
+
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
@@ -1590,8 +1614,8 @@
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -1812,14 +1836,6 @@
 			iommus = <&apps_iommu 5>;
 			memory-region = <&venus_mem>;
 			status = "disabled";
-
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
 		};
 
 		apps_iommu: iommu@1ef0000 {
@@ -2111,6 +2127,7 @@
 				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
 			pinctrl-0 = <&sdc1_default>;
 			pinctrl-1 = <&sdc1_sleep>;
 			pinctrl-names = "default", "sleep";
@@ -2132,6 +2149,7 @@
 				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
 			pinctrl-0 = <&sdc2_default>;
 			pinctrl-1 = <&sdc2_sleep>;
 			pinctrl-names = "default", "sleep";
@@ -2158,9 +2176,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
 			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_uart1_default>;
-			pinctrl-1 = <&blsp_uart1_sleep>;
 			status = "disabled";
 		};
 
@@ -2172,9 +2187,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
 			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_uart2_default>;
-			pinctrl-1 = <&blsp_uart2_sleep>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
new file mode 100644
index 000000000000..9db503e21888
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, Barnabas Czeman
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "msm8917.dtsi"
+#include "pm8937.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Xiaomi Redmi 5A (riva)";
+	compatible = "xiaomi,riva", "qcom,msm8917";
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_MSM8917 0>;
+	qcom,board-id = <0x1000b 2>, <0x2000b 2>;
+
+	pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8937_pwm 0 100000>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <128>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		energy-full-design-microwatt-hours = <11500000>;
+		constant-charge-current-max-microamp = <1000000>;
+		constant-charge-voltage-max-microvolt = <4400000>;
+		precharge-current-microamp = <256000>;
+		charge-term-current-microamp = <60000>;
+		voltage-min-design-microvolt = <3400000>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+			power-domains = <&gcc MDSS_GDSC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		framebuffer_mem: memory@90001000 {
+			reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&tsp_int_rst_default>;
+		pinctrl-names = "default";
+		vcc-supply = <&pm8937_l10>;
+		iovcc-supply = <&pm8937_l5>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+	};
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+
+	bq27426@55 {
+		compatible = "ti,bq27426";
+		reg = <0x55>;
+		monitored-battery = <&battery>;
+	};
+
+	bq25601@6b {
+		compatible = "ti,bq25601";
+		reg = <0x6b>;
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&bq25601_int_default>;
+		pinctrl-names = "default";
+		input-voltage-limit-microvolt = <4400000>;
+		input-current-limit-microamp = <1000000>;
+		monitored-battery = <&battery>;
+	};
+};
+
+&pm8937_gpios {
+	pwm_enable_default: pwm-enable-default-state {
+		pins = "gpio8";
+		function = "dtest2";
+		output-low;
+		bias-disable;
+		qcom,drive-strength = <2>;
+	};
+};
+
+&pm8937_pwm {
+	pinctrl-0 = <&pwm_enable_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pm8937_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8937-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+
+		vdd_l1_l19-supply = <&pm8937_s3>;
+		vdd_l2_l23-supply = <&pm8937_s3>;
+		vdd_l3-supply = <&pm8937_s3>;
+		vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+		vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
+
+		pm8937_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8937_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8937_s4: s4 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8937_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8937_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l8: l8 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8937_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8937_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8937_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8937_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l19: l19 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8937_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8937_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8937_l8>;
+	vqmmc-supply = <&pm8937_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8937_l11>;
+	vqmmc-supply = <&pm8937_l12>;
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32768>;
+};
+
+&tlmm {
+	bq25601_int_default: bq25601-int-default-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default: tsp-int-rst-default-state {
+		pins = "gpio64", "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&wcnss {
+	vddpx-supply = <&pm8937_l5>;
+
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+	vddxo-supply = <&pm8937_l7>;
+	vddrfa-supply = <&pm8937_l19>;
+	vddpa-supply = <&pm8937_l9>;
+	vdddig-supply = <&pm8937_l5>;
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8917.dtsi b/arch/arm64/boot/dts/qcom/msm8917.dtsi
new file mode 100644
index 000000000000..8a642fce2e40
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8917.dtsi
@@ -0,0 +1,1955 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,gcc-msm8917.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		cpu1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+		};
+
+		cpu2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+		};
+
+		cpu3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000053>;
+				entry-latency-us = <700>;
+				exit-latency-us = <1000>;
+				min-residency-us = <6500>;
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <125>;
+				exit-latency-us = <180>;
+				min-residency-us = <595>;
+				local-timer-stop;
+			};
+		};
+
+		cpu_opp_table: opp-table-cpu {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-960000000 {
+				opp-hz = /bits/ 64 <960000000>;
+			};
+
+			opp-1094400000 {
+				opp-hz = /bits/ 64 <1094400000>;
+			};
+
+			opp-1248000000 {
+				opp-hz = /bits/ 64 <1248000000>;
+			};
+
+			opp-1401600000 {
+				opp-hz = /bits/ 64 <1401600000>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+		device_type = "memory";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0>;
+		};
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8917-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8917", "qcom,smd-rpm";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8917", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8917-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		qseecom_mem: qseecom@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x400000>;
+			no-map;
+		};
+
+		rmtfs@92100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x92100000 0x0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		adsp_mem: adsp {
+			size = <0x0 0x1100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_mem: mba {
+			size = <0x0 0x100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		venus_mem: venus {
+			size = <0x0 0x400000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		wcnss_mem: wcnss {
+			size = <0x0 0x700000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0006c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&xo_board>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8917-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@1d8 {
+				reg = <0x1d8 1>;
+				bits = <0 8>;
+			};
+
+			tsens_s5_p1: s5-p1@1d9 {
+				reg = <0x1d9 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p2: s5-p2@1d9 {
+				reg = <0x1d9 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@1da {
+				reg = <0x1da 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s6_p2: s6-p2@1db {
+				reg = <0x1db 1>;
+				bits = <2 6>;
+			};
+
+			tsens_s7_p1: s7-p1@1dc {
+				reg = <0x1dc 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@1dc {
+				reg = <0x1dc 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p1: s8-p1@1dd {
+				reg = <0x1dd 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s8_p2: s8-p2@1de {
+				reg = <0x1de 1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@1df {
+				reg = <0x1df 1>;
+				bits = <0 8>;
+			};
+
+			tsens_mode: mode@210 {
+				reg = <0x210 1>;
+				bits = <0 3>;
+			};
+
+			tsens_s0_p1: s0-p1@210 {
+				reg = <0x210 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s0_p2: s0-p2@211 {
+				reg = <0x211 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@211 {
+				reg = <0x211 2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@212 {
+				reg = <0x212 2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@213 {
+				reg = <0x213 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@214 {
+				reg = <0x214 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@214 {
+				reg = <0x214 2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@215 {
+				reg = <0x215 2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@216 {
+				reg = <0x216 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@217 {
+				reg = <0x217 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s9_p1: s9-p1@230 {
+				reg = <0x230 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p2: s9-p2@230 {
+				reg = <0x230 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1: s10-p1@231 {
+				reg = <0x231 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10-p2@232 {
+				reg = <0x232 1>;
+				bits = <2 6>;
+			};
+		};
+
+		rng@e3000 {
+			compatible = "qcom,prng";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8937-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8917-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 134>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "blsp_spi3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi3_sleep: blsp1-spi3-sleep-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp2_spi2_default: blsp2-spi2-default-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			blsp2_spi2_sleep: blsp2-spi2-sleep-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcnss_pin_a: wcnss-active-state {
+				wcss-wlan-pins {
+					pins = "gpio79", "gpio80";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio78";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio77";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan2-pins {
+					pins = "gpio76";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8917";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8917", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x1040>;
+			reg-names = "mdss_phys", "vbif_phys";
+			ranges;
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8917-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				power-domains = <&gcc MDSS_GDSC>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&mdss_dsi0_opp_table>;
+				power-domains = <&rpmpd MSM8917_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94a00 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&xo_board>;
+				clock-names = "iface", "ref";
+			};
+		};
+
+		apps_iommu: iommu@1e20000 {
+			compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			compatible = "qcom,msm8917-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01f08000 0x10000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <18>;
+
+			iommu-ctx@0 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0 0x1000>;
+				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-306.32", "qcom,adreno";
+			reg = <0x01c00000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "gfx3d";
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_BIMC_GPU_CLK>,
+				 <&gcc GFX3D_CLK_SRC>;
+			power-domains = <&gcc OXILI_GX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>;
+
+			iommus = <&gpu_iommu 0>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+				};
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+
+				opp-484800000 {
+					opp-hz = /bits/ 64 <484800000>;
+				};
+
+				opp-523200000 {
+					opp-hz = /bits/ 64 <523200000>;
+				};
+
+				opp-598000000 {
+					opp-hz = /bits/ 64 <598000000>;
+				};
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>,
+			      <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+			power-domains = <&rpmpd MSM8917_VDDCX>;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x500>,
+			      <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default", "sleep";
+			power-domains = <&rpmpd MSM8917_VDDCX>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <12>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1d000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <10>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_spi3_default>;
+			pinctrl-1 = <&blsp1_spi3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi2: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp2_spi2_default>;
+			pinctrl-1 = <&blsp2_spi2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8917_VDDCX>,
+					<&rpmpd MSM8917_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-0 = <&wcnss_pin_a>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,
+			      <0x0b002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+			clocks = <&a53pll>, <&gcc GPLL0_EARLY>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "pll", "aux", "ref";
+			#clock-cells = <0>;
+		};
+
+		a53pll: clock@b016000 {
+			compatible = "qcom,msm8939-a53pll";
+			reg = <0x0b016000 0x40>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+			#clock-cells = <0>;
+			operating-points-v2 = <&pll_opp_table>;
+
+			pll_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-960000000 {
+					opp-hz = /bits/ 64 <960000000>;
+				};
+
+				opp-1094400000 {
+					opp-hz = /bits/ 64 <1094400000>;
+				};
+
+				opp-1248000000 {
+					opp-hz = /bits/ 64 <1248000000>;
+				};
+
+				opp-1401600000 {
+					opp-hz = /bits/ 64 <1401600000>;
+				};
+			};
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	thermal_zones: thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 4>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss1_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1_crit: cpuss1-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 7>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 8>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 9>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu_alert: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+		};
+
+		mdm-core-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				mdm_core_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				q6_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts
new file mode 100644
index 000000000000..91837ff940f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Barnabas Czeman
+ */
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "msm8937.dtsi"
+#include "pm8937.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Xiaomi Redmi 3S (land)";
+	compatible = "xiaomi,land", "qcom,msm8937";
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_MSM8937 0x0>;
+	qcom,board-id = <0x1000b 1>, <0x2000b 1>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <4100000>;
+		constant-charge-current-max-microamp = <1000000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@8dd01000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+			power-domains = <&gcc MDSS_GDSC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	irled {
+		compatible = "gpio-ir-tx";
+		gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+	};
+
+	reserved-memory {
+		reserved@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		framebuffer: memory@8dd01000 {
+			reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc-supply = <&pm8937_l10>;
+		vio-supply = <&pm8937_l5>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_STATUS;
+			led-max-microamp = <5000>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			function = LED_FUNCTION_STATUS;
+			led-max-microamp = <5000>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			reg = <2>;
+			function = LED_FUNCTION_STATUS;
+			led-max-microamp = <5000>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen@3e {
+		compatible = "edt,edt-ft5306";
+		reg = <0x3e>;
+
+		interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&pm8937_l10>;
+		iovcc-supply = <&pm8937_l5>;
+
+		pinctrl-0 = <&tsp_int_rst_default>;
+		pinctrl-names = "default";
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+	};
+};
+
+&pm8937_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pm8937_spmi_regulators {
+	/* APC */
+	pm8937_s5: s5 {
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&pmi8950_wled {
+	qcom,num-strings = <2>;
+	qcom,external-pfet;
+	qcom,current-limit-microamp = <20000>;
+	qcom,ovp-millivolt = <29600>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8937-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+
+		vdd_l1_l19-supply = <&pm8937_s3>;
+		vdd_l2_l23-supply = <&pm8937_s3>;
+		vdd_l3-supply = <&pm8937_s3>;
+		vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+		vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
+
+		pm8937_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8937_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8937_s4: s4 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8937_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8937_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l8: l8 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8937_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8937_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8937_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8937_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l19: l19 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8937_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8937_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&sdc2_cmd_default {
+	drive-strength = <12>;
+};
+
+&sdc2_data_default {
+	drive-strength = <12>;
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8937_l8>;
+	vqmmc-supply = <&pm8937_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8937_l11>;
+	vqmmc-supply = <&pm8937_l12>;
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32768>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <20 4>;
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default: tsp-int-rst-default-state {
+		pins = "gpio64", "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&wcnss {
+	vddpx-supply = <&pm8937_l5>;
+
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+	vddxo-supply = <&pm8937_l7>;
+	vddrfa-supply = <&pm8937_l19>;
+	vddpa-supply = <&pm8937_l9>;
+	vdddig-supply = <&pm8937_l5>;
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8937.dtsi b/arch/arm64/boot/dts/qcom/msm8937.dtsi
new file mode 100644
index 000000000000..b93621080989
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8937.dtsi
@@ -0,0 +1,2133 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ */
+
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,gcc-msm8917.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>;
+				cache-unified;
+			};
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x100000>;
+				cache-unified;
+			};
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			/* Little Cores */
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			/* Big Cores */
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8937", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core",
+				      "bus",
+				      "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		qseecom_mem: reserved@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x400000>;
+			no-map;
+		};
+
+		rmtfs@92100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x92100000 0x0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		adsp_mem: adsp {
+			size = <0x0 0x1100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_mem: mba {
+			size = <0x0 0x100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		wcnss_mem: wcnss {
+			size = <0x0 0x700000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		venus_mem: venus {
+			size = <0x0 0x400000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+	};
+
+	cpu_opp_table_c0: opp-table-c0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+		};
+
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+		};
+	};
+
+	cpu_opp_table_c1: opp-table-c1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+		};
+
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8937-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs1 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8937", "qcom,smd-rpm";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8937", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8937-rpmpd", "qcom,msm8917-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs1 13>, <0>, <&apcs1 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8937-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@1d8 {
+				reg = <0x1d8 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s5_p1: s5-p1@1d9 {
+				reg = <0x1d9 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p2: s5-p2@1d9 {
+				reg = <0x1d9 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@1da {
+				reg = <0x1da 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s6_p2: s6-p2@1db {
+				reg = <0x1db 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s7_p1: s7-p1@1dc {
+				reg = <0x1dc 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@1dc {
+				reg = <0x1dc 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p1: s8-p1@1dd {
+				reg = <0x1dd 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s8_p2: s8-p2@1de {
+				reg = <0x1de 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@1df {
+				reg = <0x1df 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_mode: mode@210 {
+				reg = <0x210 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_s0_p1: s0-p1@210 {
+				reg = <0x210 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s0_p2: s0-p2@211 {
+				reg = <0x211 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@211 {
+				reg = <0x211 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@212 {
+				reg = <0x212 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@213 {
+				reg = <0x213 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@214 {
+				reg = <0x214 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@214 {
+				reg = <0x214 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@215 {
+				reg = <0x215 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@216 {
+				reg = <0x216 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@217 {
+				reg = <0x217 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s9_p1: s9-p1@230 {
+				reg = <0x230 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p2: s9-p2@230 {
+				reg = <0x230 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1: s10-p1@231 {
+				reg = <0x231 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10-p2@232 {
+				reg = <0x232 0x1>;
+				bits = <2 6>;
+			};
+
+			gpu_speed_bin: gpu-speed-bin@201b {
+				reg = <0x201b 0x1>;
+				bits = <7 1>;
+			};
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0006c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref",
+				      "ahb",
+				      "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy",
+				      "por";
+			status = "disabled";
+		};
+
+		rng@e3000 {
+			compatible = "qcom,prng";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8937-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8917-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 134>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "blsp_spi3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi3_sleep: blsp1-spi3-sleep-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp2_spi2_default: blsp2-spi2-default-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			blsp2_spi2_sleep: blsp2-spi2-sleep-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				sdc2_cmd_default: cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				sdc2_data_default: data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			wcnss_pin_a: wcnss-active-state {
+				wcss-wlan-pins {
+					pins = "gpio79", "gpio80";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio78";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio77";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan2-pins {
+					pins = "gpio76";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8937";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>;
+			clock-names = "xo",
+				      "sleep",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8937", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x3000>;
+			reg-names = "mdss_phys",
+				    "vbif_phys";
+			ranges;
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8937-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&mdss_dsi0_opp_table>;
+				power-domains = <&rpmpd MSM8937_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94400 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@1a96000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a96000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc MSM8937_BYTE1_CLK_SRC>,
+						  <&gcc MSM8937_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc MSM8937_GCC_MDSS_BYTE1_CLK>,
+					 <&gcc MSM8937_GCC_MDSS_PCLK1_CLK>,
+					 <&gcc MSM8937_GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi1_phy>;
+
+				operating-points-v2 = <&mdss_dsi1_opp_table>;
+				power-domains = <&rpmpd MSM8937_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@1a96a00 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a96a00 0xd4>,
+				      <0x01a96400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				status = "disabled";
+			};
+		};
+
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-505.0", "qcom,adreno";
+			reg = <0x01c00000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			#cooling-cells = <2>;
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_BIMC_GPU_CLK>,
+				 <&gcc MSM8937_GCC_OXILI_TIMER_CLK>,
+				 <&gcc MSM8937_GCC_OXILI_AON_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "rbbmtimer",
+				      "alwayson";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&gcc OXILI_GX_GDSC>;
+
+			iommus = <&adreno_smmu 0>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_min_svs>;
+				};
+
+				opp-216000000 {
+					opp-hz = /bits/ 64 <216000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+
+				opp-375000000 {
+					opp-hz = /bits/ 64 <375000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+				};
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_turbo>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@1c40000 {
+			compatible = "qcom,msm8996-smmu-v2",
+				     "qcom,adreno-smmu",
+				     "qcom,smmu-v2";
+			reg = <0x01c40000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>;
+			clock-names = "bus",
+				      "iface";
+
+			power-domains = <&gcc MSM8937_OXILI_CX_GDSC>;
+		};
+
+		apps_iommu: iommu@1e20000 {
+			compatible = "qcom,msm8937-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface",
+				      "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#iommu-cells = <1>;
+			#size-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>,
+			      <0x07824000 0x800>;
+			reg-names = "hc",
+				    "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			power-domains = <&rpmpd MSM8937_VDDCX>;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x500>,
+			      <0x07864000 0x800>;
+			reg-names = "hc",
+				    "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			power-domains = <&rpmpd MSM8937_VDDCX>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <12>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp1_dma 2>,
+			       <&blsp1_dma 3>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>,
+			       <&blsp1_dma 7>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp1_dma 8>,
+			       <&blsp1_dma 9>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp1_dma 8>,
+			       <&blsp1_dma 9>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp1_spi3_default>;
+			pinctrl-1 = <&blsp1_spi3_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp1_dma 10>,
+			       <&blsp1_dma 11>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1d000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <10>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_i2c1: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp2_dma 4>,
+			       <&blsp2_dma 5>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi2: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp2_dma 6>,
+			       <&blsp2_dma 7>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp2_spi2_default>;
+			pinctrl-1 = <&blsp2_spi2_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface",
+				      "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu",
+				    "dxe",
+				    "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			power-domains = <&rpmpd MSM8937_VDDCX>,
+					<&rpmpd MSM8937_VDDMX>;
+			power-domain-names = "cx",
+					     "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-0 = <&wcnss_pin_a>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs1 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx",
+								  "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			      <0x0b002000 0x1000>;
+		};
+
+		apcs1: mailbox@b011000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		aoss-thermal {
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				mdm_core_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-thermal {
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				q6_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			thermal-sensors = <&tsens 4>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss1_alert0>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1_crit: cpuss1-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			thermal-sensors = <&tsens 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			thermal-sensors = <&tsens 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			thermal-sensors = <&tsens 7>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			thermal-sensors = <&tsens 8>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			thermal-sensors = <&tsens 9>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss0_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss0_crit: cpuss0-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 10>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu_alert: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
new file mode 100644
index 000000000000..ebb548e62e02
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Asus ZenFone 2 Laser/Selfie (1080p)";
+	compatible = "asus,z00t", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+
+		button-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reg_sd_vmmc: regulator-sdcard-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "sdcard-vmmc";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		startup-delay-us = <200>;
+
+		pinctrl-0 = <&sd_vmmc_en_default>;
+		pinctrl-names = "default";
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+
+		vdd-supply = <&pm8916_l8>;
+		vid-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&mag_reset_default>;
+		pinctrl-names = "default";
+	};
+
+	imu@68 {
+		compatible = "invensense,mpu6515";
+		reg = <0x68>;
+
+		interrupts-extended = <&tlmm 36 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l8>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&imu_default>;
+		pinctrl-names = "default";
+
+		mount-matrix = "0",  "1", "0",
+			       "-1", "0", "0",
+			       "0",  "0", "1";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l8>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,micbias1-ext-cap;
+	qcom,hphl-jack-type-normally-open;
+
+	status = "okay";
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&reg_sd_vmmc>;
+
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	touchscreen_default: touchscreen-default-state {
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		touch-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	imu_default: imu-default-state {
+		pins = "gpio36";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sd_vmmc_en_default: sd-vmmc-en-default-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio112";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
index 3cec51891aed..18381a66daef 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
@@ -126,6 +126,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
index b845da4fa23e..13422a19c26a 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -243,6 +243,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
index ceba6e73b211..07613080e79e 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
@@ -373,6 +373,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi
index 800e0747a2f7..a5187355f9fa 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi
@@ -126,6 +126,9 @@
 };
 
 &blsp_uart2 {
+	pinctrl-0 = <&blsp_uart2_console_default>;
+	pinctrl-1 = <&blsp_uart2_console_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 7a6f1eeaa3fc..eb64ec35e7f0 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -4,6 +4,7 @@
  * Copyright (c) 2020-2023, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8939.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8939.h>
@@ -34,7 +35,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -46,6 +47,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x100>;
 			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc0>;
@@ -64,6 +66,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x101>;
 			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc1>;
@@ -77,6 +80,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x102>;
 			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc2>;
@@ -90,6 +94,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x103>;
 			next-level-cache = <&l2_1>;
 			qcom,acc = <&acc3>;
@@ -103,6 +108,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x0>;
 			qcom,acc = <&acc4>;
 			qcom,saw = <&saw4>;
@@ -121,6 +127,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x1>;
 			next-level-cache = <&l2_0>;
 			qcom,acc = <&acc5>;
@@ -134,6 +141,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x2>;
 			next-level-cache = <&l2_0>;
 			qcom,acc = <&acc6>;
@@ -147,6 +155,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x3>;
 			next-level-cache = <&l2_0>;
 			qcom,acc = <&acc7>;
@@ -896,28 +905,50 @@
 				bias-pull-down;
 			};
 
-			blsp_uart1_default: blsp-uart1-default-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "blsp_uart1";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart1_console_default: blsp-uart1-console-default-state {
+				tx-pins {
+					pins = "gpio0";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio1";
+					function = "blsp_uart1";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart1_sleep: blsp-uart1-sleep-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			blsp_uart1_console_sleep: blsp-uart1-console-sleep-state {
+				pins = "gpio0", "gpio1";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
 			};
 
-			blsp_uart2_default: blsp-uart2-default-state {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-				drive-strength = <16>;
-				bias-disable;
+			blsp_uart2_console_default: blsp-uart2-console-default-state {
+				tx-pins {
+					pins = "gpio4";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-disable;
+					bootph-all;
+				};
+
+				rx-pins {
+					pins = "gpio5";
+					function = "blsp_uart2";
+					drive-strength = <16>;
+					bias-pull-up;
+					bootph-all;
+				};
 			};
 
-			blsp_uart2_sleep: blsp-uart2-sleep-state {
+			blsp_uart2_console_sleep: blsp-uart2-console-sleep-state {
 				pins = "gpio4", "gpio5";
 				function = "gpio";
 				drive-strength = <2>;
@@ -1172,8 +1203,8 @@
 			reg = <0x01800000 0x80000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1218,6 +1249,8 @@
 
 			power-domains = <&gcc MDSS_GDSC>;
 
+			resets = <&gcc GCC_MDSS_BCR>;
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#interrupt-cells = <1>;
@@ -1291,8 +1324,8 @@
 					      "core";
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi0_phy>;
 				status = "disabled";
@@ -1360,8 +1393,8 @@
 					      "core";
 				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
 						  <&gcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 				phys = <&mdss_dsi1_phy>;
 				status = "disabled";
 
@@ -1761,9 +1794,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
 			dma-names = "tx", "rx";
-			pinctrl-0 = <&blsp_uart1_default>;
-			pinctrl-1 = <&blsp_uart1_sleep>;
-			pinctrl-names = "default", "sleep";
 			status = "disabled";
 		};
 
@@ -1775,9 +1805,6 @@
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
 			dma-names = "tx", "rx";
-			pinctrl-0 = <&blsp_uart2_default>;
-			pinctrl-1 = <&blsp_uart2_sleep>;
-			pinctrl-names = "default", "sleep";
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts b/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts
new file mode 100644
index 000000000000..ef4faf763132
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Cristian Cozzolino
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Billion Capture+";
+	compatible = "flipkart,rimob", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x340008 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (1920 * 1080 * 3)>;
+
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_key_default>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+		vdd_l23-supply = <&pm8953_s3>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <1156000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	gpio_key_default: gpio-key-default-state {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
index 336b916729e4..ddd7af616794 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
@@ -296,7 +296,7 @@
 	vmmc-supply = <&pm8953_l11>;
 	vqmmc-supply = <&pm8953_l12>;
 
-	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
 
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index af4c341e2533..76317c578349 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1,9 +1,12 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8953.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,msm8953.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
@@ -44,6 +47,8 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -54,6 +59,8 @@
 			reg = <0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -64,6 +71,8 @@
 			reg = <0x2>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -74,6 +83,8 @@
 			reg = <0x3>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -84,6 +95,8 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -94,6 +107,8 @@
 			reg = <0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -104,6 +119,8 @@
 			reg = <0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -114,6 +131,8 @@
 			reg = <0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -470,6 +489,13 @@
 			clock-names = "core";
 		};
 
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8953-bimc";
+			reg = <0x00400000 0x5a000>;
+
+			#interconnect-cells = <2>;
+		};
+
 		tsens0: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
 			reg = <0x004a9000 0x1000>, /* TM */
@@ -486,6 +512,29 @@
 			reg = <0x004ab000 0x4>;
 		};
 
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8953-pcnoc";
+			reg = <0x00500000 0x12080>;
+
+			clocks = <&gcc GCC_PCNOC_USB3_AXI_CLK>;
+			clock-names = "pcnoc_usb3_axi";
+
+			#interconnect-cells = <2>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8953-snoc";
+			reg = <0x00580000 0x16080>;
+
+			#interconnect-cells = <2>;
+
+			snoc_mm: interconnect-snoc {
+				compatible = "qcom,msm8953-snoc-mm";
+
+				#interconnect-cells = <2>;
+			};
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,msm8953-pinctrl";
 			reg = <0x01000000 0x300000>;
@@ -726,42 +775,142 @@
 			};
 
 			spi_3_default: spi-3-default-state {
-				pins = "gpio10", "gpio11";
-				function = "blsp_spi3";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio10";
+					function = "blsp_spi3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
 			};
 
 			spi_3_sleep: spi-3-sleep-state {
-				pins = "gpio10", "gpio11";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
 			};
 
 			spi_5_default: spi-5-default-state {
-				pins = "gpio18", "gpio19";
-				function = "blsp_spi5";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio18";
+					function = "blsp_spi5";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "blsp_spi5";
+					drive-strength = <12>;
+					bias-disable;
+				};
 			};
 
 			spi_5_sleep: spi-5-sleep-state {
-				pins = "gpio18", "gpio19";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio18";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
 			};
 
 			spi_6_default: spi-6-default-state {
-				pins = "gpio22", "gpio23";
-				function = "blsp_spi6";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio22";
+					function = "blsp_spi6";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <12>;
+					bias-disable;
+				};
 			};
 
 			spi_6_sleep: spi-6-sleep-state {
-				pins = "gpio22", "gpio23";
+				cs-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			spi_7_default: spi-7-default-state {
+				cs-pins {
+					pins = "gpio136";
+					function = "blsp_spi7";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio135", "gpio137", "gpio138";
+					function = "blsp_spi7";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			spi_7_sleep: spi-7-sleep-state {
+				cs-pins {
+					pins = "gpio136";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio135", "gpio137", "gpio138";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			uart_5_default: uart-5-default-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "blsp_uart5";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			uart_5_sleep: uart-5-sleep-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
 				function = "gpio";
 				drive-strength = <2>;
 				bias-disable;
@@ -807,10 +956,10 @@
 			#power-domain-cells = <1>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>;
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>;
 			clock-names = "xo",
 				      "sleep",
 				      "dsi0pll",
@@ -849,6 +998,13 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			interconnects = <&snoc_mm MAS_MDP RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_DISP_SS_CFG RPM_ACTIVE_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			clocks = <&gcc GCC_MDSS_AHB_CLK>,
 				 <&gcc GCC_MDSS_AXI_CLK>,
 				 <&gcc GCC_MDSS_VSYNC_CLK>,
@@ -917,8 +1073,8 @@
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -987,8 +1143,8 @@
 
 				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
 						  <&gcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,
@@ -1065,6 +1221,11 @@
 				      "alwayson";
 			power-domains = <&gcc OXILI_GX_GDSC>;
 
+			interconnects = <&bimc MAS_OXILI RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_GPU_CFG RPM_ACTIVE_TAG>;
+
 			iommus = <&gpu_iommu 0>;
 			operating-points-v2 = <&gpu_opp_table>;
 
@@ -1072,7 +1233,7 @@
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&zap_shader_region>;
 			};
 
@@ -1302,6 +1463,13 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <133330000>;
 
+			interconnects = <&pcnoc MAS_USB3 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_USB3 RPM_ACTIVE_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			power-domains = <&gcc USB30_GDSC>;
 
 			qcom,select-utmi-as-pipe-clk;
@@ -1354,6 +1522,13 @@
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
+			interconnects = <&pcnoc MAS_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_SDCC_1 RPM_ACTIVE_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			power-domains = <&rpmpd MSM8953_VDDCX>;
 			operating-points-v2 = <&sdhc1_opp_table>;
 
@@ -1374,26 +1549,36 @@
 
 				opp-25000000 {
 					opp-hz = /bits/ 64 <25000000>;
+					opp-peak-kBps = <200000>, <100000>;
+					opp-avg-kBps = <65360>, <32768>;
 					required-opps = <&rpmpd_opp_low_svs>;
 				};
 
 				opp-50000000 {
 					opp-hz = /bits/ 64 <50000000>;
+					opp-peak-kBps = <400000>, <200000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <400000>, <400000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-192000000 {
 					opp-hz = /bits/ 64 <192000000>;
+					opp-peak-kBps = <800000>, <600000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 
 				opp-384000000 {
 					opp-hz = /bits/ 64 <384000000>;
+					opp-peak-kBps = <800000>, <800000>;
+					opp-avg-kBps = <261438>, <300000>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 			};
@@ -1414,6 +1599,13 @@
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
+			interconnects = <&pcnoc MAS_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_SDCC_2 RPM_ACTIVE_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			power-domains = <&rpmpd MSM8953_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 
@@ -1430,26 +1622,36 @@
 
 				opp-25000000 {
 					opp-hz = /bits/ 64 <25000000>;
+					opp-peak-kBps = <200000>, <100000>;
+					opp-avg-kBps = <65360>, <32768>;
 					required-opps = <&rpmpd_opp_low_svs>;
 				};
 
 				opp-50000000 {
 					opp-hz = /bits/ 64 <50000000>;
+					opp-peak-kBps = <400000>, <400000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <800000>, <400000>;
+					opp-avg-kBps = <130718>, <130718>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-177770000 {
 					opp-hz = /bits/ 64 <177770000>;
+					opp-peak-kBps = <600000>, <600000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 
 				opp-200000000 {
 					opp-hz = /bits/ 64 <200000000>;
+					opp-peak-kBps = <800000>, <800000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 			};
@@ -1544,7 +1746,7 @@
 			reg = <0x078b7000 0x600>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
 			dma-names = "tx", "rx";
@@ -1592,6 +1794,24 @@
 			qcom,controlled-remotely;
 		};
 
+		uart_5: serial@7aef000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07aef000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+
+			pinctrl-0 = <&uart_5_default>;
+			pinctrl-1 = <&uart_5_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+		};
+
 		i2c_5: i2c@7af5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af5000 0x600>;
@@ -1617,7 +1837,7 @@
 			reg = <0x07af5000 0x600>;
 			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
-			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+			clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
 				<&gcc GCC_BLSP2_AHB_CLK>;
 			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
 			dma-names = "tx", "rx";
@@ -1657,7 +1877,7 @@
 			reg = <0x07af6000 0x600>;
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
-			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP2_AHB_CLK>;
 			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
 			dma-names = "tx", "rx";
@@ -1692,6 +1912,26 @@
 			status = "disabled";
 		};
 
+		spi_7: spi@7af7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af7000 0x600>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_7_default>;
+			pinctrl-1 = <&spi_7_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_8: i2c@7af8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af8000 0x600>;
@@ -1932,19 +2172,19 @@
 							#sound-dai-cells = <1>;
 
 							dai@0 {
-								reg = <0>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 								direction = <Q6ASM_DAI_RX>;
 							};
 							dai@1 {
-								reg = <1>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 								direction = <Q6ASM_DAI_TX>;
 							};
 							dai@2 {
-								reg = <2>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 								direction = <Q6ASM_DAI_RX>;
 							};
 							dai@3 {
-								reg = <3>;
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 								direction = <Q6ASM_DAI_RX>;
 								is-compress-dai;
 							};
diff --git a/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
new file mode 100644
index 000000000000..18832a3b9a1c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, André Apitzsch <git@apitzsch.eu>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "msm8976.dtsi"
+#include "pm8004.dtsi"
+#include "pm8950.dtsi"
+
+/ {
+	model = "BQ Aquaris X5 Plus (Longcheer L9360)";
+	compatible = "longcheer,l9360", "qcom,msm8976";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@83200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x83200000 0x0 (1080 * 1920 * 3)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_sensor_default>, <&volume_up_default>;
+		pinctrl-names = "default";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&tlmm 101 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_WHITE>;
+			default-state = "off";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+
+			pinctrl-0 = <&button_backlight_default>;
+			pinctrl-names = "default";
+		};
+	};
+
+	reg_ts_vdd: regulator-vdd-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-vdd-ts";
+
+		gpio = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		framebuffer@83000000 {
+			reg = <0x0 0x83000000 0x0 0x2800000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupts-extended = <&tlmm 140 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 122 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 109 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&nfc_default>;
+		pinctrl-1 = <&nfc_sleep>;
+		pinctrl-names = "default", "sleep";
+	};
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		reg = <0x20>;
+		compatible = "syna,rmi4-i2c";
+
+		interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&ts_int_default>, <&ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep>, <&ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		vdd-supply = <&pm8950_l6>;
+		vio-supply = <&reg_ts_vdd>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+
+		rmi4-f1a@1a {
+			reg = <0x1a>;
+			/* Keys listed from right to left */
+			linux,keycodes = <KEY_APPSELECT KEY_HOMEPAGE KEY_BACK>;
+		};
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	vdd_gfx-supply = <&pm8004_s5>;
+};
+
+&pm8004_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 1 supply */
+	pm8004_s2: s2 {
+		/* regulator-min-microvolt = <500000>; */
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc1";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pm8004_s5: s5 {
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-enable-ramp-delay = <500>;
+		regulator-name = "vdd_gfx";
+		/* Hack this on until the gpu driver is ready for it */
+		regulator-always-on;
+	};
+};
+
+&pm8950_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8950_spmi_regulators {
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 0 supply */
+	pm8950_spmi_s5: s5 {
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		/* regulator-min-microvolt = <500000>; */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc0";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rpm_requests {
+	pm8950_regulators: regulators {
+		compatible = "qcom,rpm-pm8950-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_l1_l19-supply = <&pm8950_s3>;
+		vdd_l2_l23-supply = <&pm8950_s3>;
+		vdd_l3-supply = <&pm8950_s3>;
+		vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+
+		pm8950_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1162500>;
+		};
+
+		pm8950_s3: s3 {
+			regulator-min-microvolt = <1325000>;
+			regulator-max-microvolt = <1325000>;
+		};
+
+		pm8950_s4: s4 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8950_l1: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8950_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8950_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8950_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8950_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8950_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8950_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8950_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8950_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&pm8950_l8>;
+	vqmmc-supply = <&pm8950_l5>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	bus-width = <4>;
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8950_l11>;
+	vqmmc-supply = <&pm8950_l12>;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_cd_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+
+	button_backlight_default: button-backlight-default-state {
+		pins = "gpio101";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	hall_sensor_default: hall-sensor-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_default: nfc-default-state {
+		pins = "gpio122", "gpio140";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_sleep: nfc-sleep-state {
+		int-pins {
+			pins = "gpio140";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+		ven-pins {
+			pins = "gpio122";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-disable;
+		};
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_sleep: sdc2-cd-sleep-state {
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_int_sleep: ts-int-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	ts_reset_default: ts-reset-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_sleep: ts-sleep-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	volume_up_default: volume-up-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index d036f31dfdca..f9962512f243 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8976.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -781,6 +782,42 @@
 				bias-disable;
 			};
 
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
 			wcss_wlan_default: wcss-wlan-default-state  {
 				wcss-wlan2-pins {
 					pins = "gpio40";
@@ -824,10 +861,10 @@
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>;
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>;
 			clock-names = "xo",
 				      "xo_a",
 				      "dsi0pll",
@@ -970,8 +1007,8 @@
 
 				assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
 						  <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi0_phy>;
 
@@ -1046,8 +1083,8 @@
 
 				assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>,
 						  <&gcc GCC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi1_phy>;
 
@@ -1330,6 +1367,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp1_uart1: serial@78af000 {
@@ -1450,6 +1488,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,controlled-remotely;
 		};
 
 		blsp2_uart2: serial@7af0000 {
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
index 4520d5d51a29..6a231afad85d 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
@@ -93,26 +93,32 @@
 
 &cpu0 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu1 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu2 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu3 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu4 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu5 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &pm8994_resin {
diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
index 29e79ae0849d..1aca11daf83c 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
@@ -2,12 +2,13 @@
 /*
  * Copyright (c) 2015, Huawei Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2023, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2021-2024, Petr Vorel <petr.vorel@gmail.com>
  */
 
 /dts-v1/;
 
 #include "msm8994.dtsi"
+#include "pm8994.dtsi"
 
 / {
 	model = "Huawei Nexus 6P";
@@ -46,6 +47,24 @@
 			no-map;
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-vol-up {
+			label = "volume up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&pm8994_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &blsp1_uart2 {
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index 10cd244dea4f..4c983b10dd92 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -387,11 +387,6 @@
 
 		interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>;
 
-		button_num = <8>;
-		touchpad_num = <0>;
-		wheel_num = <0>;
-		slider_num = <0>;
-
 		vcc-supply = <&vreg_l18a_2p85>;
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 1acb0f159511..b5cbdd620bb9 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -34,7 +34,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 			clock-output-names = "sleep_clk";
 		};
 	};
@@ -437,6 +437,15 @@
 			#size-cells = <1>;
 			ranges;
 
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
+
 			clocks = <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
index 38035e0db80b..63ab564655bc 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -288,15 +288,15 @@
 	#size-cells = <0>;
 
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -492,6 +492,11 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
+		vreg_lvs2a: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
index dfe75119b8d2..0bb9e3d8f714 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
@@ -27,10 +27,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn";
 };
 
 &mss_pil {
@@ -41,6 +41,8 @@
 
 &slpi_pil {
 	firmware-name = "qcom/msm8996/oneplus3/slpi.mbn";
+	px-supply = <&vreg_lvs2a>;
+
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
index 51fce65e89f1..1d7b27c5aff6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
@@ -28,10 +28,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn";
 };
 
 &mss_pil {
@@ -42,6 +42,8 @@
 
 &slpi_pil {
 	firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn";
+	px-supply = <&vreg_lvs2a>;
+
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index f8e9d90afab0..3c6a40212a8d 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -64,7 +64,7 @@
 		};
 
 		led@1 {
-			reg = <0>;
+			reg = <1>;
 			chan-name = "button-backlight1";
 			led-cur = /bits/ 8 <0x32>;
 			max-cur = /bits/ 8 <0xc8>;
@@ -91,10 +91,8 @@
 
 };
 
-&gpu {
-	zap-shader {
-		firmware-name = "qcom/msm8996/gemini/a530_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/msm8996/gemini/a530_zap.mbn";
 };
 
 &mdss_dsi0 {
@@ -137,15 +135,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -156,10 +154,7 @@
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "gemini";
-	audio-routing = "RX_BIAS", "MCLK",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+	audio-routing = "RX_BIAS", "MCLK";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b379623c1b8a..9d4ce47578fb 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8996.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -937,10 +938,10 @@
 			clocks = <&xo_board>,
 				 <&gcc GPLL0>,
 				 <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
 				 <&mdss_hdmi_phy>;
 			clock-names = "xo",
 				      "gpll0",
@@ -1071,8 +1072,10 @@
 					      "core_mmss",
 					      "pixel",
 					      "core";
-				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi0_phy>;
 				status = "disabled";
@@ -1139,8 +1142,10 @@
 					      "core_mmss",
 					      "pixel",
 					      "core";
-				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+						  <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				phys = <&mdss_dsi1_phy>;
 				status = "disabled";
@@ -1328,7 +1333,7 @@
 				};
 			};
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&gpu_mem>;
 			};
 		};
@@ -1905,14 +1910,28 @@
 
 				device_type = "pci";
 
-				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
+				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi0",
+						  "msi1",
+						  "msi2",
+						  "msi3",
+						  "msi4",
+						  "msi5",
+						  "msi6",
+						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie0_state_on>;
@@ -1968,14 +1987,28 @@
 
 				device_type = "pci";
 
-				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
+				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi0",
+						  "msi1",
+						  "msi2",
+						  "msi3",
+						  "msi4",
+						  "msi5",
+						  "msi6",
+						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie1_state_on>;
@@ -2029,14 +2062,28 @@
 
 				device_type = "pci";
 
-				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
+				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi0",
+						  "msi1",
+						  "msi2",
+						  "msi3",
+						  "msi4",
+						  "msi5",
+						  "msi6",
+						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie2_state_on>;
@@ -3065,9 +3112,14 @@
 			#size-cells = <1>;
 			ranges;
 
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
@@ -3444,6 +3496,9 @@
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <60000000>;
 
+			interconnects = <&pnoc MASTER_USB_HS &bimc SLAVE_EBI_CH0>,
+					<&bimc MASTER_AMPSS_M0 &pnoc SLAVE_USB_HS>;
+			interconnect-names = "usb-ddr", "apps-usb";
 			power-domains = <&gcc USB30_GDSC>;
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
@@ -3714,6 +3769,7 @@
 
 		intc: interrupt-controller@9bc0000 {
 			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
index 5e3fd1637f44..f8ab03f106a1 100644
--- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
@@ -39,10 +39,8 @@
 	};
 };
 
-&gpu {
-	zap-shader {
-		firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
 };
 
 &mdss_dsi0 {
@@ -87,15 +85,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
index 5e3b9130e9c2..1cc33c3123a4 100644
--- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
@@ -91,10 +91,8 @@
 	};
 };
 
-&gpu {
-	zap-shader {
-		firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn";
 };
 
 &mdp_smmu {
@@ -139,15 +137,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index f1ceaedd9520..f5558495cb02 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -372,6 +372,7 @@
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
index 901f6ac0084d..c11b972771c3 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -100,6 +100,12 @@
 	};
 };
 
+&venus {
+	firmware-name = "qcom/msm8998/LENOVO/81F1/qcvss8998.mbn";
+
+	status = "okay";
+};
+
 &wifi {
-	qcom,ath10k-calibration-variant = "Lenovo_Miix630";
+	qcom,calibration-variant = "Lenovo_Miix630";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
index 7c77612fb990..ad425267e902 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -156,6 +156,7 @@
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index d8cc0d729e99..3650f2501886 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -450,6 +450,7 @@
 &qusb2phy {
 	status = "okay";
 
+	vdd-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c2caad85c668..5c75fba16ce2 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2,6 +2,7 @@
 /* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8998.h>
 #include <dt-bindings/clock/qcom,gpucc-msm8998.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
@@ -935,8 +936,24 @@
 				 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
 
 			#interrupt-cells = <1>;
-			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
 					<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
@@ -2790,11 +2807,11 @@
 				      "gpll0_div";
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&gcc GCC_MMSS_GPLL0_CLK>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_hdmi_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_hdmi_phy>,
 				 <0>,
 				 <0>,
 				 <&gcc GCC_MMSS_GPLL0_DIV_CLK>;
@@ -2829,8 +2846,8 @@
 				compatible = "qcom,msm8998-dpu";
 				reg = <0x0c901000 0x8f000>,
 				      <0x0c9a8e00 0xf0>,
-				      <0x0c9b0000 0x2008>,
-				      <0x0c9b8000 0x1040>;
+				      <0x0c9b0000 0x3000>,
+				      <0x0c9b8000 0x3000>;
 				reg-names = "mdp",
 					    "regdma",
 					    "vbif",
@@ -2932,8 +2949,8 @@
 					      "bus";
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
 						  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd MSM8998_VDDCX>;
@@ -3008,8 +3025,8 @@
 					      "bus";
 				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
 						  <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd MSM8998_VDDCX>;
@@ -3065,9 +3082,9 @@
 
 			mdss_hdmi: hdmi-tx@c9a0000 {
 				compatible = "qcom,hdmi-tx-8998";
-				reg =	<0x0c9a0000 0x50c>,
-					<0x00780000 0x6220>,
-					<0x0c9e0000 0x2c>;
+				reg = <0x0c9a0000 0x50c>,
+				      <0x00780000 0x6220>,
+				      <0x0c9e0000 0x2c>;
 				reg-names = "core_physical",
 					    "qfprom_physical",
 					    "hdcp_physical";
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
index 0094e0ef058b..3f8b9eafe164 100644
--- a/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -70,6 +70,12 @@
 			status = "disabled";
 		};
 
+		pm660l_flash: led-controller@d300 {
+			compatible = "qcom,pm660l-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
 		pm660l_wled: leds@d800 {
 			compatible = "qcom,pm660l-wled";
 			reg = <0xd800>, <0xd900>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index a74a7ff660d2..d2568686a098 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -49,8 +49,6 @@
 		pon: pon@800 {
 			compatible = "qcom,pm8998-pon";
 			reg = <0x0800>;
-			mode-bootloader = <0x2>;
-			mode-recovery = <0x1>;
 
 			pon_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
diff --git a/arch/arm64/boot/dts/qcom/pm8937.dtsi b/arch/arm64/boot/dts/qcom/pm8937.dtsi
new file mode 100644
index 000000000000..77809c3534a7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8937.dtsi
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8937-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8937_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8937", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm8937_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8937_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm8937_gpios: gpio@c000 {
+			compatible = "qcom,pm8937-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8937_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8937_mpps: mpps@a000 {
+			compatible = "qcom,pm8937-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pm8937_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8937_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8937_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8937_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0 0x31 0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+			};
+
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+			};
+
+			channel@c {
+				reg = <VADC_SPARE1>;
+			};
+
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8937", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8937_pwm: pwm {
+			compatible = "qcom,pm8937-pwm", "qcom,pm8916-pwm";
+
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pm8937_spmi_regulators: regulators {
+			compatible = "qcom,pm8937-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmd8028.dtsi b/arch/arm64/boot/dts/qcom/pmd8028.dtsi
new file mode 100644
index 000000000000..a00913e28a4c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmd8028.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmd8028-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&pmd8028_temp_alarm>;
+
+			trips {
+				pmd8028_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pmd8028_trip1: trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				pmd8028_trip2: trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmd8028: pmic@4 {
+		compatible = "qcom,pmd8028", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmd8028_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmd8028_gpios: gpio@8800 {
+			compatible = "qcom,pmd8028-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmd8028_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
index 4aff437263a2..5bd91a5cd124 100644
--- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -22,19 +22,19 @@
 
 			channel@0 {
 				reg = <VADC_USBIN>;
-				qcom,pre-scaling = <1 4>;
+				qcom,pre-scaling = <1 20>;
 				label = "usbin";
 			};
 
 			channel@1 {
 				reg = <VADC_DCIN>;
-				qcom,pre-scaling = <1 4>;
+				qcom,pre-scaling = <1 20>;
 				label = "dcin";
 			};
 
 			channel@2 {
 				reg = <VADC_VCHG_SNS>;
-				qcom,pre-scaling = <1 1>;
+				qcom,pre-scaling = <1 3>;
 				label = "vchg_sns";
 			};
 
@@ -55,6 +55,14 @@
 				qcom,pre-scaling = <1 1>;
 				label = "chg_temp";
 			};
+
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
 		};
 
 		pmi8950_mpps: mpps@a000 {
@@ -84,6 +92,23 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		labibb {
+			compatible = "qcom,pmi8950-lab-ibb",
+				     "qcom,pmi8998-lab-ibb";
+
+			ibb: ibb {
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-names = "sc-err", "ocp";
+			};
+
+			lab: lab {
+				interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-names = "sc-err", "ocp";
+			};
+		};
+
 		pmi8950_pwm: pwm {
 			compatible = "qcom,pmi8950-pwm";
 			#pwm-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmih0108.dtsi b/arch/arm64/boot/dts/qcom/pmih0108.dtsi
new file mode 100644
index 000000000000..1c875995d881
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmih0108.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmih0108-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&pmih0108_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmih0108: pmic@7 {
+		compatible = "qcom,pmih0108", "qcom,spmi-pmic";
+		reg = <0x7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmih0108_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmih0108_gpios: gpio@8800 {
+			compatible = "qcom,pmih0108-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmih0108_gpios 0 0 18>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmih0108_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,pm8550b-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index f0ed15458dd7..565752af2204 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -76,6 +76,14 @@
 			status = "disabled";
 		};
 
+		pmk8350_sdam_1: nvram@7000 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7000 0x100>;
+		};
+
 		pmk8350_sdam_2: nvram@7100 {
 			compatible = "qcom,spmi-sdam";
 			reg = <0x7100>;
@@ -89,6 +97,70 @@
 			};
 		};
 
+		pmk8350_sdam_5: nvram@7400 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7400 0x100>;
+		};
+
+		pmk8350_sdam_13: nvram@7c00 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7c00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7c00 0x100>;
+		};
+
+		pmk8350_sdam_14: nvram@7d00 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7d00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7d00 0x100>;
+		};
+
+		pmk8350_sdam_21: nvram@8400 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x8400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x8400 0x100>;
+		};
+
+		pmk8350_sdam_22: nvram@8500 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x8500>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x8500 0x100>;
+		};
+
+		pmk8350_sdam_23: nvram@8600 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x8600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x8600 0x100>;
+		};
+
+		pmk8350_sdam_41: nvram@9800 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x9800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x9800 0x100>;
+		};
+
+		pmk8350_sdam_46: nvram@9d00 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x9d00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x9d00 0x100>;
+		};
+
 		pmk8350_gpios: gpio@b000 {
 			compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
 			reg = <0xb000>;
diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
index c7ac9b2eaacf..583f61fc16ad 100644
--- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
@@ -64,7 +64,7 @@
 			};
 		};
 
-		pmk8550_gpios: gpio@8800 {
+		pmk8550_gpios: gpio@b800 {
 			compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
 			reg = <0xb800>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/purwa.dtsi b/arch/arm64/boot/dts/qcom/purwa.dtsi
new file mode 100644
index 000000000000..2cecd2dd0de8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/purwa.dtsi
@@ -0,0 +1,754 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/* X1P42100 is heavily based on hamoa, with some meaningful differences */
+#include "hamoa.dtsi"
+
+/delete-node/ &bwmon_cluster0;
+/delete-node/ &cluster_pd2;
+/delete-node/ &cpu_map_cluster2;
+/delete-node/ &cpu8;
+/delete-node/ &cpu9;
+/delete-node/ &cpu10;
+/delete-node/ &cpu11;
+/delete-node/ &cpu_pd8;
+/delete-node/ &cpu_pd9;
+/delete-node/ &cpu_pd10;
+/delete-node/ &cpu_pd11;
+/delete-node/ &gpu_opp_table;
+/delete-node/ &gpu_speed_bin;
+/delete-node/ &pcie3_phy;
+/delete-node/ &thermal_zones;
+
+&gcc {
+	compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc";
+};
+
+&gmu {
+	compatible = "qcom,adreno-gmu-x145.0", "qcom,adreno-gmu";
+};
+
+&gpu {
+	compatible = "qcom,adreno-43030c00", "qcom,adreno";
+
+	nvmem-cells = <&gpu_speed_bin>;
+	nvmem-cell-names = "speed_bin";
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2-adreno", "operating-points-v2";
+
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
+			opp-peak-kBps = <16500000>;
+			qcom,opp-acd-level = <0xa8295ffd>;
+			opp-supported-hw = <0x3>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
+			opp-peak-kBps = <16500000>;
+			qcom,opp-acd-level = <0x882a5ffd>;
+			opp-supported-hw = <0x7>;
+		};
+
+		opp-1107000000 {
+			opp-hz = /bits/ 64 <1107000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+			opp-peak-kBps = <16500000>;
+			qcom,opp-acd-level = <0x882a5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		opp-1014000000 {
+			opp-hz = /bits/ 64 <1014000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+			opp-peak-kBps = <14398438>;
+			qcom,opp-acd-level = <0xa82a5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		opp-940000000 {
+			opp-hz = /bits/ 64 <940000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+			opp-peak-kBps = <14398438>;
+			qcom,opp-acd-level = <0xa82a5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		opp-825000000 {
+			opp-hz = /bits/ 64 <825000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+			opp-peak-kBps = <12449219>;
+			qcom,opp-acd-level = <0x882b5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+			opp-peak-kBps = <10687500>;
+			qcom,opp-acd-level = <0xa82c5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		opp-666000000-0 {
+			opp-hz = /bits/ 64 <666000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+			opp-peak-kBps = <8171875>;
+			qcom,opp-acd-level = <0xa82d5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		/* Only applicable for SKUs which has 666Mhz as Fmax */
+		opp-666000000-1 {
+			opp-hz = /bits/ 64 <666000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+			opp-peak-kBps = <16500000>;
+			qcom,opp-acd-level = <0xa82d5ffd>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+			opp-peak-kBps = <6074219>;
+			qcom,opp-acd-level = <0x882e5ffd>;
+			opp-supported-hw = <0x1f>;
+		};
+
+		opp-380000000 {
+			opp-hz = /bits/ 64 <380000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+			opp-peak-kBps = <3000000>;
+			qcom,opp-acd-level = <0xc82f5ffd>;
+			opp-supported-hw = <0x1f>;
+		};
+
+		opp-280000000 {
+			opp-hz = /bits/ 64 <280000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+			opp-peak-kBps = <2136719>;
+			qcom,opp-acd-level = <0xc82f5ffd>;
+			opp-supported-hw = <0x1f>;
+		};
+	};
+
+};
+
+&gpucc {
+	compatible = "qcom,x1p42100-gpucc";
+};
+
+/* PCIe3 has half the lanes compared to X1E80100 */
+&pcie3 {
+	num-lanes = <4>;
+};
+
+&pcie6a_phy {
+	compatible = "qcom,x1p42100-qmp-gen4x4-pcie-phy";
+};
+
+&qfprom {
+	gpu_speed_bin: gpu-speed-bin@119 {
+		reg = <0x119 0x2>;
+		bits = <7 9>;
+	};
+};
+
+&soc {
+	/* The PCIe3 PHY on X1P42100 uses a different IP block */
+	pcie3_phy: phy@1bd4000 {
+		compatible = "qcom,x1p42100-qmp-gen4x4-pcie-phy";
+		reg = <0x0 0x01bd4000 0x0 0x2000>,
+		      <0x0 0x01bd6000 0x0 0x2000>;
+
+		clocks = <&gcc GCC_PCIE_3_PHY_AUX_CLK>,
+			 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
+			 <&tcsr TCSR_PCIE_8L_CLKREF_EN>,
+			 <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_3_PIPE_CLK>,
+			 <&gcc GCC_PCIE_3_PIPEDIV2_CLK>;
+		clock-names = "aux",
+			      "cfg_ahb",
+			      "ref",
+			      "rchng",
+			      "pipe",
+			      "pipediv2";
+
+		resets = <&gcc GCC_PCIE_3_PHY_BCR>,
+			 <&gcc GCC_PCIE_3_NOCSR_COM_PHY_BCR>;
+		reset-names = "phy",
+			      "phy_nocsr";
+
+		assigned-clocks = <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>;
+		assigned-clock-rates = <100000000>;
+
+		power-domains = <&gcc GCC_PCIE_3_PHY_GDSC>;
+
+		#clock-cells = <0>;
+		clock-output-names = "pcie3_pipe_clk";
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
+
+/* While physically present, this controller is left unconfigured and unused */
+&tsens3 {
+	status = "disabled";
+};
+
+/ {
+	thermal-zones {
+		aoss0-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-0-top-thermal {
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-0-btm-thermal {
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-1-top-thermal {
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-1-btm-thermal {
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-2-top-thermal {
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-2-btm-thermal {
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-3-top-thermal {
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-3-btm-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-top-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-btm-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-0-top-thermal {
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-0-btm-thermal {
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-1-top-thermal {
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-1-btm-thermal {
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-2-top-thermal {
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-2-btm-thermal {
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-3-top-thermal {
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-3-btm-thermal {
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-top-thermal {
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-btm-thermal {
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsp0-thermal {
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsp1-thermal {
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsp2-thermal {
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsp3-thermal {
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <200>;
+
+			thermal-sensors = <&tsens2 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <200>;
+
+			thermal-sensors = <&tsens2 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <200>;
+
+			thermal-sensors = <&tsens2 7>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpuss2_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <200>;
+
+			thermal-sensors = <&tsens2 8>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss3_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpuss3_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera1-thermal {
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index fdc62f1b1c5a..455e5c9bb072 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -14,7 +14,9 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sc7280.dtsi"
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include "kodiak.dtsi"
 #include "pm7250b.dtsi"
 #include "pm7325.dtsi"
 #include "pm8350c.dtsi" /* PM7350C */
@@ -45,6 +47,8 @@
 			stride = <(1224 * 4)>;
 			format = "a8r8g8b8";
 			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+			vci-supply = <&vreg_oled_vci>;
+			dvdd-supply = <&vreg_oled_dvdd>;
 		};
 	};
 
@@ -101,40 +105,32 @@
 					reg = <1>;
 
 					pmic_glink_ss_in: endpoint {
-						remote-endpoint = <&usb_1_dwc3_ss>;
+						remote-endpoint = <&redriver_ss_out>;
 					};
 				};
-			};
-		};
-	};
 
-	reserved-memory {
-		cont_splash_mem: cont-splash@e1000000 {
-			reg = <0x0 0xe1000000 0x0 0x2300000>;
-			no-map;
-		};
+				port@2 {
+					reg = <2>;
 
-		cdsp_mem: cdsp@88f00000 {
-			reg = <0x0 0x88f00000 0x0 0x1e00000>;
-			no-map;
-		};
-
-		removed_mem: removed@c0000000 {
-			reg = <0x0 0xc0000000 0x0 0x5100000>;
-			no-map;
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&ocp96011_sbu_mux>;
+					};
+				};
+			};
 		};
+	};
 
-		rmtfs_mem: memory@f8500000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0 0xf8500000 0x0 0x600000>;
-			no-map;
-
-			qcom,client-id = <1>;
-			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
-		};
+	vreg_afvdd_2p8: regulator-afvdd-2p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "AFVDD_2P8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vreg_bob>;
 	};
 
-	ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
+	vreg_ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
 		compatible = "regulator-fixed";
 		regulator-name = "OIS_AVDD0_1P8";
 		regulator-min-microvolt = <1800000>;
@@ -144,7 +140,7 @@
 		vin-supply = <&vreg_bob>;
 	};
 
-	ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
+	vreg_ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
 		compatible = "regulator-fixed";
 		regulator-name = "OIS_DVDD_1P1";
 		regulator-min-microvolt = <1100000>;
@@ -154,16 +150,90 @@
 		vin-supply = <&vreg_s8b>;
 	};
 
-	afvdd_2p8: regulator-afvdd-2p8 {
+	vreg_oled_dvdd: regulator-oled-dvdd {
 		compatible = "regulator-fixed";
-		regulator-name = "AFVDD_2P8";
+		regulator-name = "oled_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s1b>;
+
+		regulator-boot-on;
+	};
+
+	vreg_oled_vci: regulator-oled-vci {
+		compatible = "regulator-fixed";
+		regulator-name = "oled_vci";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_l13c>;
+
+		regulator-boot-on;
+	};
+
+	vreg_usb_redrive_1v8: regulator-usb-redrive-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_REDRIVE_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+
+		regulator-boot-on;
+
+		pinctrl-0 = <&usb_redrive_1v8_en_default>;
+		pinctrl-names = "default";
+	};
+
+	vreg_vtof_ldo_2p8: regulator-vtof-ldo-2p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VTOF_LDO_2P8";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		regulator-enable-ramp-delay = <233>;
+
+		gpio = <&tlmm 141 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+
 		vin-supply = <&vreg_bob>;
 	};
 
+	reserved-memory {
+		cont_splash_mem: cont-splash@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		removed_mem: removed@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x5100000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f8500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8500000 0x0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
+		};
+	};
+
 	thermal-zones {
 		camera-thermal {
 			polling-delay-passive = <0>;
@@ -556,9 +626,54 @@
 	};
 };
 
-&dispcc {
-	/* Disable for now so simple-framebuffer continues working */
-	status = "disabled";
+&cci0 {
+	status = "okay";
+};
+
+&cci0_i2c0 {
+	/* IMX800 @ 1a */
+
+	eeprom@50 {
+		compatible = "puya,p24c256c", "atmel,24c256";
+		reg = <0x50>;
+		vcc-supply = <&vreg_l6p>;
+		read-only;
+	};
+};
+
+&cci0_i2c1 {
+	camera_imx858_dw9800k: actuator@e {
+		compatible = "dongwoon,dw9800k";
+		reg = <0x0e>;
+		vdd-supply = <&vreg_afvdd_2p8>;
+
+		dongwoon,sac-mode = <1>;
+		dongwoon,vcm-prescale = <16>;
+	};
+
+	/* IMX858 @ 29 */
+
+	eeprom@54 {
+		compatible = "giantec,gt24p128f", "atmel,24c128";
+		reg = <0x54>;
+		vcc-supply = <&vreg_l6p>;
+		read-only;
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	/* S5KJN1SQ03 @ 10 */
+
+	eeprom@51 {
+		compatible = "giantec,gt24p128f", "atmel,24c128";
+		reg = <0x51>;
+		vcc-supply = <&vreg_l6p>;
+		read-only;
+	};
 };
 
 &gcc {
@@ -587,6 +702,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcm6490/fairphone5/a660_zap.mbn";
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -650,6 +773,8 @@
 				regulator-name = "vreg_l6p";
 				regulator-min-microvolt = <1700000>;
 				regulator-max-microvolt = <1904000>;
+				/* Pull-up for CCI I2C busses */
+				regulator-always-on;
 			};
 
 			vreg_l7p: ldo7 {
@@ -661,8 +786,36 @@
 	};
 
 	/* Pixelworks @ 26 */
-	/* FSA4480 USB audio switch @ 42 */
-	/* AW86927FCR haptics @ 5a */
+
+	typec-mux@42 {
+		compatible = "ocs,ocp96011", "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 7 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			ocp96011_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+				data-lanes = <1 0>;
+			};
+		};
+	};
+
+	vibrator@5a {
+		compatible = "awinic,aw86927";
+		reg = <0x5a>;
+
+		interrupts-extended = <&tlmm 101 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&aw86927_int_default>;
+		pinctrl-names = "default";
+	};
 };
 
 &i2c2 {
@@ -675,7 +828,36 @@
 &i2c4 {
 	status = "okay";
 
-	/* PTN36502 USB redriver @ 1a */
+	typec-mux@1a {
+		compatible = "nxp,ptn36502";
+		reg = <0x1a>;
+
+		vdd18-supply = <&vreg_usb_redrive_1v8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
 };
 
 &i2c9 {
@@ -692,6 +874,59 @@
 	status = "okay";
 };
 
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+};
+
+&mdss_dsi {
+	vdda-supply = <&vreg_l6b>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		vci-supply = <&vreg_oled_vci>;
+		vddio-supply = <&vreg_l12c>;
+		dvdd-supply = <&vreg_oled_dvdd>;
+
+		pinctrl-0 = <&disp_reset_n_active>, <&mdp_vsync>;
+		pinctrl-1 = <&disp_reset_n_suspend>, <&mdp_vsync>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi_phy {
+	vdds-supply = <&vreg_l10c>;
+	status = "okay";
+};
+
 &pm7250b_adc {
 	pinctrl-0 = <&pm7250b_adc_default>;
 	pinctrl-names = "default";
@@ -954,10 +1189,65 @@
 	status = "okay";
 };
 
+&sound {
+	compatible = "fairphone,fp5-sndcard";
+	model = "Fairphone 5";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	displayport-rx-dai-link {
+		link-name = "DisplayPort Playback";
+
+		codec {
+			sound-dai = <&mdss_dp>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai DISPLAY_PORT_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	usb-dai-link {
+		link-name = "USB Playback";
+
+		codec {
+			sound-dai = <&q6usbdai USB_RX>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai USB_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
 &spi13 {
 	status = "okay";
 
-	/* Goodix touchscreen @ 0 */
+	touchscreen@0 {
+		compatible = "goodix,gt9897";
+		reg = <0>;
+		interrupts-extended = <&tlmm 81 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 105 GPIO_ACTIVE_LOW>;
+		avdd-supply = <&vreg_l3c>;
+		vddio-supply = <&vreg_l2c>;
+		spi-max-frequency = <1000000>;
+		touchscreen-size-x = <1224>;
+		touchscreen-size-y = <2700>;
+	};
 };
 
 &tlmm {
@@ -974,6 +1264,20 @@
 		bias-disable;
 	};
 
+	disp_reset_n_active: disp-reset-n-active-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp_reset_n_suspend: disp-reset-n-suspend-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	hall_sensor_default: hall-sensor-default-state {
 		pins = "gpio155";
 		function = "gpio";
@@ -981,6 +1285,13 @@
 		bias-pull-up;
 	};
 
+	mdp_vsync: mdp-vsync-state {
+		pins = "gpio80";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	pm8008_int_default: pm8008-int-default-state {
 		pins = "gpio25";
 		function = "gpio";
@@ -1039,6 +1350,21 @@
 		function = "gpio";
 		bias-pull-down;
 	};
+
+	usb_redrive_1v8_en_default: usb-redrive-1v8-en-default-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	aw86927_int_default: aw86927-int-default-state {
+		pins = "gpio101";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart5 {
@@ -1101,22 +1427,16 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&pmic_glink_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l10c>;
 	vdda18-supply = <&vreg_l1c>;
@@ -1143,12 +1463,16 @@
 	status = "okay";
 };
 
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
+
 &venus {
 	firmware-name = "qcom/qcm6490/fairphone5/venus.mbn";
 	status = "okay";
 };
 
 &wifi {
-	qcom,ath11k-calibration-variant = "Fairphone_5";
+	qcom,calibration-variant = "Fairphone_5";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index c5fb153614e1..089a027c57d5 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -13,11 +13,12 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sc7280.dtsi"
+#include "kodiak.dtsi"
 #include "pm7250b.dtsi"
 #include "pm7325.dtsi"
 #include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
+#include "qcs6490-audioreach.dtsi"
 
 /delete-node/ &ipa_fw_mem;
 /delete-node/ &rmtfs_mem;
@@ -169,6 +170,30 @@
 		regulator-min-microvolt = <3700000>;
 		regulator-max-microvolt = <3700000>;
 	};
+
+	wcd9370: audio-codec-0 {
+		compatible = "qcom,wcd9370-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+
+		vdd-buck-supply = <&vreg_l17b_1p7>;
+		vdd-rxtx-supply = <&vreg_l18b_1p8>;
+		vdd-px-supply = <&vreg_l18b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob_3p296>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+
+		qcom,rx-device = <&wcd937x_rx>;
+		qcom,tx-device = <&wcd937x_tx>;
+
+		#sound-dai-cells = <1>;
+	};
 };
 
 &apps_rsc {
@@ -258,6 +283,8 @@
 			regulator-name = "vreg_l6b_1p2";
 			regulator-min-microvolt = <1140000>;
 			regulator-max-microvolt = <1260000>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -265,6 +292,8 @@
 			regulator-name = "vreg_l7b_2p952";
 			regulator-min-microvolt = <2400000>;
 			regulator-max-microvolt = <3544000>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -279,6 +308,8 @@
 			regulator-name = "vreg_l9b_1p2";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1304000>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -467,6 +498,8 @@
 			regulator-name = "vreg_l10c_0p88";
 			regulator-min-microvolt = <720000>;
 			regulator-max-microvolt = <1050000>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -499,6 +532,27 @@
 	};
 };
 
+&gcc {
+	protected-clocks = <GCC_AGGRE_NOC_PCIE_1_AXI_CLK> ,<GCC_PCIE_1_AUX_CLK>,
+			   <GCC_PCIE_1_AUX_CLK_SRC>, <GCC_PCIE_1_CFG_AHB_CLK>,
+			   <GCC_PCIE_1_MSTR_AXI_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>,
+			   <GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>,
+			   <GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,<GCC_USB30_SEC_MASTER_CLK>,
+			   <GCC_USB30_SEC_MASTER_CLK_SRC>, <GCC_USB30_SEC_MOCK_UTMI_CLK>,
+			   <GCC_USB30_SEC_MOCK_UTMI_CLK_SRC>,
+			   <GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC>, <GCC_USB30_SEC_SLEEP_CLK>,
+			   <GCC_USB3_SEC_PHY_AUX_CLK>, <GCC_USB3_SEC_PHY_AUX_CLK_SRC>,
+			   <GCC_USB3_SEC_PHY_COM_AUX_CLK>, <GCC_USB3_SEC_PHY_PIPE_CLK>,
+			   <GCC_USB3_SEC_PHY_PIPE_CLK_SRC>, <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>, <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>, <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>, <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>, <GCC_WPSS_RSCP_CLK>;
+};
+
 &gpu {
 	status = "okay";
 };
@@ -507,6 +561,22 @@
 	firmware-name = "qcom/qcm6490/a660_zap.mbn";
 };
 
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+};
+
+&lpass_wsa_macro {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -687,6 +757,165 @@
 	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	compatible = "qcom,qcm6490-idp-sndcard";
+	model = "QCM6490-IDP";
+
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"TX DMIC0", "MIC BIAS1",
+			"TX DMIC1", "MIC BIAS2",
+			"TX DMIC2", "MIC BIAS3",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"VA DMIC0", "VA MIC BIAS3",
+			"VA DMIC1", "VA MIC BIAS3",
+			"VA DMIC2", "VA MIC BIAS1",
+			"VA DMIC3", "VA MIC BIAS1";
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>,
+				    <&swr2 0>, <&lpass_wsa_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		codec {
+			sound-dai = <&wcd9370 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		codec {
+			sound-dai = <&wcd9370 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		codec {
+			sound-dai = <&lpass_va_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	wcd937x_rx: codec@0,4 {
+		compatible = "sdw20217010a00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9370 RX Port 1 (HPH_L/R)       <==>    SWR1 Port 1 (HPH_L/R)
+		 * WCD9370 RX Port 2 (CLSH)          <==>    SWR1 Port 2 (CLSH)
+		 * WCD9370 RX Port 3 (COMP_L/R)      <==>    SWR1 Port 3 (COMP_L/R)
+		 * WCD9370 RX Port 4 (LO)            <==>    SWR1 Port 4 (LO)
+		 * WCD9370 RX Port 5 (DSD_L/R)       <==>    SWR1 Port 5 (DSD)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+
+		/*
+		 * Static channels mapping between slave and master rx port channels.
+		 * In the order of slave port channels, which is
+		 * hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l.
+		 */
+		qcom,rx-channel-mapping = /bits/ 8 <1 2 1 1 2 1 1 2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd937x_tx: codec@0,3 {
+		compatible = "sdw20217010a00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9370 TX Port 1 (ADC1)               <=> SWR2 Port 2
+		 * WCD9370 TX Port 2 (ADC2, 3)            <=> SWR2 Port 2
+		 * WCD9370 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3
+		 * WCD9370 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4
+		 */
+		qcom,tx-port-mapping = <1 1 2 3>;
+
+		/*
+		 * Static channel mapping between slave and master tx port channels.
+		 * In the order of slave port channels which is adc1, adc2, adc3,
+		 * mic0, dmic1, mbhc, dmic2, dmic3, dmci4, dmic5, dmic6, dmic7.
+		 */
+		qcom,tx-channel-mapping = /bits/ 8 <1 2 1 1 2 3 3 4 1 2 3 4>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		powerdown-gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <1 2 3 7>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		powerdown-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <4 5 6 8>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <32 2>, /* ADSP */
 			       <48 4>; /* NFC */
@@ -696,6 +925,13 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
 };
 
 &uart5 {
@@ -722,12 +958,9 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
+
+	status = "okay";
 };
 
 &usb_1_hsphy {
@@ -747,7 +980,12 @@
 
 &wifi {
 	memory-region = <&wlan_fw_mem>;
-	qcom,ath11k-calibration-variant = "Qualcomm_qcm6490idp";
+	qcom,calibration-variant = "Qualcomm_qcm6490idp";
 
 	status = "okay";
 };
+
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts
new file mode 100644
index 000000000000..bf18c4852081
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "kodiak.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &wpss_mem;
+
+/ {
+	model = "Particle Tachyon";
+	compatible = "particle,tachyon", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart12;
+		serial2 = &uart7;
+		serial3 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&activity_led_state>;
+		pinctrl-names = "default";
+
+		led-activity {
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&tlmm 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu_in: endpoint {
+						remote-endpoint = <&usbdp_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_power_5v: regulator-power-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "power_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&tlmm 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b700000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b710000 0x0 0xa000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f8500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8500000 0x0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+
+	usbdp-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+		select-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usbdp_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbdp_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu_in>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-name = "vreg_s1b_1p872";
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-name = "vreg_s7b_0p972";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-name = "vreg_s8b_1p272";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-name = "vreg_l2b_3p072";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-name = "vreg_l3b_0p504";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-name = "vreg_l7b_2p952";
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-name = "vreg_l8b_0p904";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-name = "vreg_l11b_1p504";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-name = "vreg_l12b_0p751";
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-name = "vreg_l13b_0p53";
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-name = "vreg_l14b_1p08";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-name = "vreg_l15b_0p765";
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-name = "vreg_l16b_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-name = "vreg_l17b_1p7";
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-name = "vreg_s1c_2p19";
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-name = "vreg_s9c_1p084";
+			regulator-min-microvolt = <1084000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-name = "vreg_l2c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-name = "vreg_l3c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-name = "vreg_l4c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-name = "vreg_l5c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-name = "vreg_l8c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-name = "vreg_l10c_0p88";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-name = "vreg_l11c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-name = "vreg_l12c_1p65";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-name = "vreg_l13c_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-name = "vreg_bob_3p296";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+};
+
+&ipa {
+	firmware-name = "qcom/qcm6490/particle/tachyon/ipa_fws.mbn";
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcm6490/particle/tachyon/a660_zap.mbn";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_reset_n>, <&pcie0_wake_n>, <&pcie0_clkreq_n>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
+	pinctrl-names = "default";
+
+	vddpe-3v3-supply = <&vreg_power_5v>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/particle/tachyon/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/particle/tachyon/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/particle/tachyon/modem.mbn";
+	status = "okay";
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_2p96>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	activity_led_state: activity-led-state {
+		pins = "gpio14";
+		function = "gpio";
+		bias-disable;
+	};
+
+	bt_en_state: bt-default-state {
+		pins = "gpio84";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
+	pcie0_reset_n: pcie0-reset-n-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	pcie0_wake_n: pcie0-wake-n-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	pcie1_reset_n: pcie1-reset-n-state {
+		pins = "gpio2";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	pcie1_wake_n: pcie1-wake-n-state {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	usbdp_sbu_default: usbdp-sbu-state {
+		oe-n-pins {
+			pins = "gpio108";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio42";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	wlan_en_state: wlan-default-state {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-1 = <&qup_uart7_sleep_cts>,
+		    <&qup_uart7_sleep_rts>,
+		    <&qup_uart7_sleep_tx>,
+		    <&qup_uart7_sleep_rx>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart12 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p952>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "otg";
+	usb-role-switch;
+
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
index 4667e47a74bc..797f37596bf1 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
  * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
- * Copyright (c) 2024, Caleb Connolly <caleb@postmarketos.org>
+ * Copyright (c) 2024, Casey Connolly <casey.connolly@linaro.org>
  */
 
 /dts-v1/;
@@ -14,7 +14,7 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sc7280.dtsi"
+#include "kodiak.dtsi"
 #include "pm7250b.dtsi"
 #include "pm7325.dtsi"
 #include "pm8350c.dtsi" /* PM7350C */
@@ -118,6 +118,11 @@
 			no-map;
 		};
 
+		removed_mem: removed@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x5100000>;
+			no-map;
+		};
+
 		rmtfs_mem: rmtfs@f8500000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0xf8500000 0x0 0x600000>;
@@ -130,8 +135,6 @@
 
 	thermal-zones {
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pmk8350_adc_tm 2>;
 
 			trips {
@@ -144,8 +147,6 @@
 		};
 
 		chg-skin-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm7250b_adc_tm 0>;
 
 			trips {
@@ -158,8 +159,6 @@
 		};
 
 		conn-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm7250b_adc_tm 1>;
 
 			trips {
@@ -172,8 +171,6 @@
 		};
 
 		quiet-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pmk8350_adc_tm 1>;
 
 			trips {
@@ -186,8 +183,6 @@
 		};
 
 		rear-cam-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pmk8350_adc_tm 4>;
 
 			trips {
@@ -200,8 +195,6 @@
 		};
 
 		sdm-skin-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pmk8350_adc_tm 3>;
 
 			trips {
@@ -214,8 +207,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pmk8350_adc_tm 0>;
 
 			trips {
@@ -568,6 +559,11 @@
 	status = "okay";
 };
 
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
+
 &pm7250b_adc {
 	channel@4d {
 		reg = <ADC5_AMUX_THM1_100K_PU>;
@@ -614,6 +610,46 @@
 	};
 };
 
+&pm8350c_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>, <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
+&pm8350c_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
 &pmk8350_adc_tm {
 	status = "okay";
 
@@ -857,7 +893,7 @@
 &uart7 {
 	/delete-property/interrupts;
 	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
-			<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
 
 	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
 	pinctrl-names = "default", "sleep";
@@ -910,22 +946,16 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_dp_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l10c>;
 	vdda18-supply = <&vreg_l1c>;
@@ -942,8 +972,6 @@
 
 	qcom,squelch-detector-bp = <(-2090)>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
@@ -954,8 +982,18 @@
 	status = "okay";
 };
 
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&venus {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/venus.mbn";
+
+	status = "okay";
+};
+
 &wifi {
-	qcom,ath11k-calibration-variant = "SHIFTphone_8";
+	qcom,calibration-variant = "SHIFTphone_8";
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 215ba146207a..4328c1dda898 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -28,7 +28,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -694,6 +694,8 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				dr_mode = "otg";
 			};
 		};
@@ -731,6 +733,8 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				dr_mode = "peripheral";
 			};
 		};
@@ -1308,6 +1312,7 @@
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0b000000 0x1000>,
 			      <0x0b002000 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
new file mode 100644
index 000000000000..be67eb173046
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -0,0 +1,670 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "talos.dtsi"
+#include "pm8150.dtsi"
+/ {
+	model = "Qualcomm Technologies, Inc. QCS615 Ride (IQ-615 Beta EVK)";
+	compatible = "qcom,qcs615-ride", "qcom,qcs615", "qcom,sm6150";
+	chassis-type = "embedded";
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &uart0;
+		serial1 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <38400000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	dp-dsi0-connector {
+		compatible = "dp-connector";
+		label = "DSI0";
+		type = "mini";
+
+		port {
+			dp_dsi0_connector_in: endpoint {
+				remote-endpoint = <&dsi2dp_bridge_out>;
+			};
+		};
+	};
+
+	vreg_conn_1p8: regulator-conn-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_conn_1p8";
+		startup-delay-us = <4000>;
+		enable-active-high;
+		gpio = <&pm8150_gpios 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_conn_pa: regulator-conn-pa {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_conn_pa";
+		startup-delay-us = <4000>;
+		enable-active-high;
+		gpio = <&pm8150_gpios 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB2_VBUS";
+		gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb2_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vreg_12p0: regulator-vreg-12p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_12P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vreg_1p0: regulator-vreg-1p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_1P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+
+		vin-supply = <&vreg_1p8>;
+	};
+
+	vreg_1p8: regulator-vreg-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_1P8";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vreg_5p0>;
+	};
+
+	vreg_3p0: regulator-vreg-3p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_3P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		vin-supply = <&vreg_12p0>;
+	};
+
+	vreg_5p0: regulator-vreg-5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_5P0";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vreg_12p0>;
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+		pinctrl-names = "default";
+
+		bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		wlan-enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_conn_pa>;
+		vddaon-supply = <&vreg_s5a>;
+		vddpmu-supply = <&vreg_conn_1p8>;
+		vddpmumx-supply = <&vreg_conn_1p8>;
+		vddpmucx-supply = <&vreg_conn_pa>;
+		vddrfa0p95-supply = <&vreg_s5a>;
+		vddrfa1p3-supply = <&vreg_s6a>;
+		vddrfa1p9-supply = <&vreg_l15a>;
+		vddpcie1p3-supply = <&vreg_s6a>;
+		vddpcie1p9-supply = <&vreg_l15a>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s3a: smps3 {
+			regulator-name = "vreg_s3a";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1829000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a: smps6 {
+			regulator-name = "vreg_s6a";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1404000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1a: ldo1 {
+			regulator-name = "vreg_l1a";
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <852000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a: ldo2 {
+			regulator-name = "vreg_l2a";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <875000>;
+			regulator-max-microvolt = <975000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a: ldo10 {
+			regulator-name = "vreg_l10a";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <1232000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a: ldo12 {
+			regulator-name = "vreg_l12a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3230000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a: ldo15 {
+			regulator-name = "vreg_l15a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a: ldo16 {
+			regulator-name = "vreg_l16a";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a: ldo17 {
+			regulator-name = "vreg_l17a";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	io_expander: pinctrl@3e {
+		compatible = "semtech,sx1509q";
+		reg = <0x3e>;
+		interrupts-extended = <&tlmm 58 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		semtech,probe-reset;
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9542";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			bridge@58 {
+				compatible = "analogix,anx7625";
+				reg = <0x58>;
+				interrupts-extended = <&io_expander 0 IRQ_TYPE_EDGE_FALLING>;
+				enable-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+				vdd10-supply = <&vreg_1p0>;
+				vdd18-supply = <&vreg_1p8>;
+				vdd33-supply = <&vreg_3p0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsi2dp_bridge_in: endpoint {
+							remote-endpoint = <&mdss_dsi0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dsi2dp_bridge_out: endpoint {
+							remote-endpoint = <&dp_dsi0_connector_in>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l11a>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&dsi2dp_bridge_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vcca-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&pcie {
+	perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+
+	status = "okay";
+};
+
+&pcie_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		qcom,calibration-variant = "QC_QCS615_Ride";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pm8150_gpios {
+	usb2_en: usb2-en-state {
+		pins = "gpio10";
+		function = "normal";
+		output-enable;
+		power-source = <0>;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs615/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs615/cdsp.mbn";
+
+	status = "okay";
+};
+
+&tlmm {
+	bt_en_state: bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		bias-pull-down;
+		output-low;
+	};
+
+	pcie_default_state: pcie-default-state {
+		clkreq-pins {
+			pins = "gpio90";
+			function = "pcie_clk_req";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio101";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-pins {
+			pins = "gpio100";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_en_state: wlan-en-state {
+		pins = "gpio98";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <16>;
+		output-low;
+	};
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	vmmc-supply = <&vreg_l17a>;
+	vqmmc-supply = <&vreg_s4a>;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_state_on>;
+	pinctrl-1 = <&sdc2_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l10a>;
+	vqmmc-supply = <&vreg_s4a>;
+
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+		firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy_2 {
+	vdd-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 123 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_s4a>;
+	vccq2-max-microamp = <600000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+
+	status = "okay";
+};
+
+&venus {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi b/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi
new file mode 100644
index 000000000000..c1867711298b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ *
+ * Common definitions for SC7280-based boards with AudioReach.
+ */
+
+#include <dt-bindings/clock/qcom,lpass-sc7280.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+&lpass_rx_macro {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&lpass_va_macro>;
+	clock-names = "mclk",
+		      "npl",
+		      "macro",
+		      "dcodec",
+		      "fsgen";
+};
+
+&lpass_tlmm {
+	clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+	clock-names = "core",
+		      "audio";
+};
+
+&lpass_tx_macro {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&lpass_va_macro>;
+	clock-names = "mclk",
+		      "npl",
+		      "macro",
+		      "dcodec",
+		      "fsgen";
+};
+
+&lpass_va_macro {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	clocks = <&q6prmcc LPASS_CLK_ID_VA_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+	clock-names = "mclk",
+		      "macro",
+		      "dcodec";
+
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>,
+		    <&lpass_dmic23_clk>, <&lpass_dmic23_data>;
+	pinctrl-names = "default";
+
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&lpass_wsa_macro {
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&lpass_va_macro>;
+	clock-names = "mclk",
+		      "npl",
+		      "macro",
+		      "dcodec",
+		      "fsgen";
+};
+
+&remoteproc_adsp_glink {
+	/delete-node/ apr;
+
+	gpr {
+		compatible = "qcom,gpr";
+		qcom,glink-channels = "adsp_apps";
+		qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+		qcom,intents = <512 20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		q6apm: service@1 {
+			compatible = "qcom,q6apm";
+			reg = <GPR_APM_MODULE_IID>;
+			#sound-dai-cells = <0>;
+			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+			q6apmdai: dais {
+				compatible = "qcom,q6apm-dais";
+				iommus = <&apps_smmu 0x1801 0x0>;
+			};
+
+			q6apmbedai: bedais {
+				compatible = "qcom,q6apm-lpass-dais";
+				#sound-dai-cells = <1>;
+			};
+		};
+
+		q6prm: service@2 {
+			compatible = "qcom,q6prm";
+			reg = <GPR_PRM_MODULE_IID>;
+			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+			q6prmcc: clock-controller {
+				compatible = "qcom,q6prm-lpass-clocks";
+				#clock-cells = <2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts
new file mode 100644
index 000000000000..bb5a42b038f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts
@@ -0,0 +1,1095 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "kodiak.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi" /* PM7350C */
+#include "pmk8350.dtsi" /* PMK7325 */
+#include "qcs6490-audioreach.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &remoteproc_wpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wifi;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wlan_fw_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Radxa Dragon Q6A";
+	compatible = "radxa,dragon-q6a", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &uart5;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
+
+		vdd-rxtx-supply = <&vreg_l18b_1p8>;
+		vdd-io-supply = <&vreg_l18b_1p8>;
+		vdd-buck-supply = <&vreg_l17b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob_3p296>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		qcom,hphl-jack-type-normally-closed;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb2_1_con: connector-0 {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vcc_5v_peri>;
+
+		port {
+			usb2_1_connector: endpoint {
+				remote-endpoint = <&usb_hub_2_1>;
+			};
+		};
+	};
+
+	usb2_2_con: connector-1 {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vcc_5v_peri>;
+
+		port {
+			usb2_2_connector: endpoint {
+				remote-endpoint = <&usb_hub_2_2>;
+			};
+		};
+	};
+
+	usb2_3_con: connector-2 {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vcc_5v_peri>;
+
+		port {
+			usb2_3_connector: endpoint {
+				remote-endpoint = <&usb_hub_2_3>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&user_led>;
+		pinctrl-names = "default";
+
+		user-led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@84800000 {
+			reg = <0x0 0x84800000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@87000000 {
+			reg = <0x0 0x87000000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@88e00000 {
+			reg = <0x0 0x88e00000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@89500000 {
+			reg = <0x0 0x89500000 0x0 0x500000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@89a00000 {
+			reg = <0x0 0x89a00000 0x0 0x2000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		msm-skin-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+		};
+
+		ufs-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+		};
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_5v_peri>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v_peri>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_5v_peri: regulator-vcc-5v-peri {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v_peri";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vph_pwr>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p536>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p2>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p84>;
+
+		vreg_s1b_1p84: smps1 {
+			regulator-name = "vreg_s1b_1p84";
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7b_0p536: smps7 {
+			regulator-name = "vreg_s7b_0p536";
+			regulator-min-microvolt = <536000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p2: smps8 {
+			regulator-name = "vreg_s8b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1496000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
+			regulator-min-microvolt = <832000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+							RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-name = "vreg_l2b_3p072";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+							RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+							RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-name = "vreg_l7b_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+							RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p8: ldo17 {
+			regulator-name = "vreg_l17b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p84>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p536>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1976000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-name = "vreg_l10c_0p88";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-name = "vreg_bob_3p296";
+			regulator-min-microvolt = <3032000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcs6490/a660_zap.mbn";
+};
+
+/* Pin 13, 15 in GPIO header */
+&i2c0 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+/* Pin 27, 28 in GPIO header */
+&i2c2 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+/* Pin 3, 5 in GPIO header */
+&i2c6 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+&i2c10 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t11";
+		reg = <0x68>;
+	};
+};
+
+/* External touchscreen */
+&i2c13 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
+
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>;
+	pinctrl-names = "default";
+
+	/* Support for QPS615 PCIe switch */
+	iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+		    <0x100 &apps_smmu 0x1c81 0x1>,
+		    <0x208 &apps_smmu 0x1c84 0x1>,
+		    <0x210 &apps_smmu 0x1c85 0x1>,
+		    <0x218 &apps_smmu 0x1c86 0x1>,
+		    <0x300 &apps_smmu 0x1c87 0x1>,
+		    <0x400 &apps_smmu 0x1c88 0x1>,
+		    <0x500 &apps_smmu 0x1c89 0x1>,
+		    <0x501 &apps_smmu 0x1c90 0x1>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pm7325_gpios {
+	pm7325_adc_default: adc-default-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+};
+
+&pm7325_temp_alarm {
+	io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	msm-skin-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	ufs-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_vadc {
+	pinctrl-0 = <&pm7325_adc_default>;
+	pinctrl-names = "default";
+
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk7325_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		label = "xo_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@103 {
+		reg = <PM7325_ADC7_DIE_TEMP>;
+		label = "pm7325_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "quiet_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "msm_skin_therm";
+	};
+
+	channel@14a {
+		/* According to datasheet, 0x4a = AMUX1_GPIO = GPIO_02 */
+		reg = <PM7325_ADC7_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "ufs_therm";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&qspi {
+	/* It's not possible to use QSPI with iommu */
+	/* due to an error in qcom_smmu_write_s2cr */
+	/delete-property/ iommus;
+
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>,
+				<&qspi_data1>, <&qspi_data23>;
+	pinctrl-1 = <&qspi_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	spi_flash: flash@0 {
+		compatible = "winbond,w25q256", "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&qupv3_id_0 {
+	firmware-name = "qcom/qcm6490/qupv3fw.elf";
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	firmware-name = "qcom/qcm6490/qupv3fw.elf";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs6490/radxa/dragon-q6a/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs6490/cdsp.mbn";
+	status = "okay";
+};
+
+&sdhc_1 {
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	vmmc-supply = <&vreg_l7b_2p96>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
+
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_2p96>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,qcs6490-rb3gen2-sndcard";
+	model = "QCS6490-Radxa-Dragon-Q6A";
+
+	audio-routing = "IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+/* Pin 11, 29, 31, 32 in GPIO header */
+&spi7 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+/* Pin 19, 21, 23, 24, 26 in GPIO header */
+&spi12 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+/* Pin 22, 33, 36, 37 in GPIO header */
+&spi14 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+&swr0 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&tlmm {
+	gpio-line-names =
+		/* GPIO_0 ~ GPIO_3 */
+		"PIN_13", "PIN_15", "", "",
+		/* GPIO_4 ~ GPIO_7 */
+		"", "", "", "",
+		/* GPIO_8 ~ GPIO_11 */
+		"PIN_27", "PIN_28", "", "",
+		/* GPIO_12 ~ GPIO_15 */
+		"", "", "", "",
+		/* GPIO_16 ~ GPIO_19 */
+		"", "", "", "",
+		/* GPIO_20 ~ GPIO_23 */
+		"", "", "PIN_8", "PIN_10",
+		/* GPIO_24 ~ GPIO_27 */
+		"PIN_3", "PIN_5", "PIN_16", "PIN_27",
+		/* GPIO_28 ~ GPIO_31 */
+		"PIN_31", "PIN_11", "PIN_32", "PIN_29",
+		/* GPIO_32 ~ GPIO_35 */
+		"", "", "", "",
+		/* GPIO_36 ~ GPIO_39 */
+		"", "", "", "",
+		/* GPIO_40 ~ GPIO_43 */
+		"", "", "", "",
+		/* GPIO_44 ~ GPIO_47 */
+		"", "", "", "",
+		/* GPIO_48 ~ GPIO_51 */
+		"PIN_21", "PIN_19", "PIN_23", "PIN_24",
+		/* GPIO_52 ~ GPIO_55 */
+		"", "", "", "PIN_26",
+		/* GPIO_56 ~ GPIO_59 */
+		"PIN_33", "PIN_22", "PIN_37", "PIN_36",
+		/* GPIO_60 ~ GPIO_63 */
+		"", "", "", "",
+		/* GPIO_64 ~ GPIO_67 */
+		"", "", "", "",
+		/* GPIO_68 ~ GPIO_71 */
+		"", "", "", "",
+		/* GPIO_72 ~ GPIO_75 */
+		"", "", "", "",
+		/* GPIO_76 ~ GPIO_79 */
+		"", "", "", "",
+		/* GPIO_80 ~ GPIO_83 */
+		"", "", "", "",
+		/* GPIO_84 ~ GPIO_87 */
+		"", "", "", "",
+		/* GPIO_88 ~ GPIO_91 */
+		"", "", "", "",
+		/* GPIO_92 ~ GPIO_95 */
+		"", "", "", "",
+		/* GPIO_96 ~ GPIO_99 */
+		"PIN_7", "PIN_12", "PIN_38", "PIN_40",
+		/* GPIO_100 ~ GPIO_103 */
+		"PIN_35", "", "", "",
+		/* GPIO_104 ~ GPIO_107 */
+		"", "", "", "",
+		/* GPIO_108 ~ GPIO_111 */
+		"", "", "", "",
+		/* GPIO_112 ~ GPIO_115 */
+		"", "", "", "",
+		/* GPIO_116 ~ GPIO_119 */
+		"", "", "", "",
+		/* GPIO_120 ~ GPIO_123 */
+		"", "", "", "",
+		/* GPIO_124 ~ GPIO_127 */
+		"", "", "", "",
+		/* GPIO_128 ~ GPIO_131 */
+		"", "", "", "",
+		/* GPIO_132 ~ GPIO_135 */
+		"", "", "", "",
+		/* GPIO_136 ~ GPIO_139 */
+		"", "", "", "",
+		/* GPIO_140 ~ GPIO_143 */
+		"", "", "", "",
+		/* GPIO_144 ~ GPIO_147 */
+		"", "", "", "",
+		/* GPIO_148 ~ GPIO_151 */
+		"", "", "", "",
+		/* GPIO_152 ~ GPIO_155 */
+		"", "", "", "",
+		/* GPIO_156 ~ GPIO_159 */
+		"", "", "", "",
+		/* GPIO_160 ~ GPIO_163 */
+		"", "", "", "",
+		/* GPIO_164 ~ GPIO_167 */
+		"", "", "", "",
+		/* GPIO_168 ~ GPIO_171 */
+		"", "", "", "",
+		/* GPIO_172 ~ GPIO_174 */
+		"", "", "";
+
+	pcie0_reset_n: pcie0-reset-n-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie0_wake_n: pcie0-wake-n-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	pcie1_reset_n: pcie1-reset-n-state {
+		pins = "gpio2";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie1_wake_n: pcie1-wake-n-state {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17";
+		function = "gpio";
+		output-disable;
+	};
+
+	sd_cd: sd-cd-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	user_led: user-led-state {
+		pins = "gpio42";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "host";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	/* Onboard USB 2.0 hub */
+	usb_hub_2_x: hub@1 {
+		compatible = "usb1a40,0101";
+		reg = <1>;
+		vdd-supply = <&vcc_5v_peri>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				usb_hub_2_1: endpoint {
+					remote-endpoint = <&usb2_1_connector>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				usb_hub_2_2: endpoint {
+					remote-endpoint = <&usb2_2_connector>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				usb_hub_2_3: endpoint {
+					remote-endpoint = <&usb2_3_connector>;
+				};
+			};
+		};
+
+		/* FCU760K Wi-Fi & Bluetooth module */
+		wifi@4 {
+			compatible = "usba69c,8d80";
+			reg = <4>;
+		};
+	};
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&venus {
+	status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+&pcie0_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
+&qspi_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&qspi_cs0 {
+	bias-disable;
+	drive-strength = <8>;
+};
+
+&qspi_data0 {
+	bias-disable;
+	drive-strength = <8>;
+};
+
+&qspi_data1 {
+	bias-disable;
+	drive-strength = <8>;
+};
+
+&qspi_data23 {
+	bias-disable;
+	drive-strength = <8>;
+};
+
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso
new file mode 100644
index 000000000000..619a42b5ef48
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved.
+*/
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/clock/qcom,gcc-sc7280.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+&spi11 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	st33htpm0: tpm@0 {
+		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
new file mode 100644
index 000000000000..b9e4a5214f70
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/*
+ * Camera Sensor overlay on top of rb3gen2 core kit.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,camcc-sc7280.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&camss {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* The port index denotes CSIPHY id i.e. csiphy3 */
+		port@3 {
+			reg = <3>;
+
+			csiphy3_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@1a {
+		compatible = "sony,imx577";
+
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-1 = <&cam2_suspend>;
+
+		clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply = <&vreg_l18b_1p8>;
+		avdd-supply = <&vph_pwr>;
+		dvdd-supply = <&vph_pwr>;
+
+		port {
+			imx577_ep: endpoint {
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy3_ep>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	cam2_default: cam2-default-state {
+		pins = "gpio67";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cam2_suspend: cam2-suspend-state {
+		pins = "gpio67";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 27695bd54220..f29a352b0288 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
- * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 /dts-v1/;
@@ -9,13 +9,17 @@
 #define PM7250B_SID 8
 #define PM7250B_SID1 9
 
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sc7280.dtsi"
+#include "kodiak.dtsi"
 #include "pm7250b.dtsi"
 #include "pm7325.dtsi"
 #include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
+#include "qcs6490-audioreach.dtsi"
 
 /delete-node/ &ipa_fw_mem;
 /delete-node/ &rmtfs_mem;
@@ -33,6 +37,7 @@
 
 	aliases {
 		serial0 = &uart5;
+		serial1 = &uart7;
 	};
 
 	chosen {
@@ -173,6 +178,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -211,12 +217,107 @@
 		};
 	};
 
-	vph_pwr: vph-pwr-regulator {
+	vph_pwr: regulator-vph-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
 		regulator-min-microvolt = <3700000>;
 		regulator-max-microvolt = <3700000>;
 	};
+
+	thermal-zones {
+		sdm-skin-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	wcn6750-pmu {
+		compatible = "qcom,wcn6750-pmu";
+		pinctrl-0 = <&bt_en>;
+		pinctrl-names = "default";
+		vddaon-supply = <&vreg_s7b_0p972>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		vddpmu-supply = <&vreg_s7b_0p972>;
+		vddrfa0p8-supply = <&vreg_s7b_0p972>;
+		vddrfa1p2-supply = <&vreg_s8b_1p272>;
+		vddrfa1p7-supply = <&vreg_s1b_1p872>;
+		vddrfa2p2-supply = <&vreg_s1c_2p19>;
+
+		bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -234,8 +335,6 @@
 		vdd-s8-supply = <&vph_pwr>;
 		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
 		vdd-l2-l7-supply = <&vreg_bob_3p296>;
-		vdd-l3-supply = <&vreg_s2b_0p876>;
-		vdd-l5-supply = <&vreg_s2b_0p876>;
 		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
 		vdd-l8-supply = <&vreg_s7b_0p972>;
 		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
@@ -248,12 +347,6 @@
 			regulator-max-microvolt = <2040000>;
 		};
 
-		vreg_s2b_0p876: smps2 {
-			regulator-name = "vreg_s2b_0p876";
-			regulator-min-microvolt = <570070>;
-			regulator-max-microvolt = <1050000>;
-		};
-
 		vreg_s7b_0p972: smps7 {
 			regulator-name = "vreg_s7b_0p972";
 			regulator-min-microvolt = <535000>;
@@ -284,27 +377,13 @@
 		vreg_l3b_0p504: ldo3 {
 			regulator-name = "vreg_l3b_0p504";
 			regulator-min-microvolt = <312000>;
-			regulator-max-microvolt = <910000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4b_0p752: ldo4 {
-			regulator-name = "vreg_l4b_0p752";
-			regulator-min-microvolt = <752000>;
-			regulator-max-microvolt = <820000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		reg_l5b_0p752: ldo5 {
-			regulator-name = "reg_l5b_0p752";
-			regulator-min-microvolt = <552000>;
-			regulator-max-microvolt = <832000>;
+			regulator-max-microvolt = <650000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6b_1p2: ldo6 {
 			regulator-name = "vreg_l6b_1p2";
-			regulator-min-microvolt = <1140000>;
+			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1260000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
@@ -335,7 +414,7 @@
 
 		vreg_l11b_1p504: ldo11 {
 			regulator-name = "vreg_l11b_1p504";
-			regulator-min-microvolt = <1504000>;
+			regulator-min-microvolt = <1776000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
@@ -356,7 +435,7 @@
 
 		vreg_l14b_1p08: ldo14 {
 			regulator-name = "vreg_l14b_1p08";
-			regulator-min-microvolt = <1080000>;
+			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
@@ -420,26 +499,8 @@
 
 		vreg_s1c_2p19: smps1 {
 			regulator-name = "vreg_s1c_2p19";
-			regulator-min-microvolt = <2190000>;
-			regulator-max-microvolt = <2210000>;
-		};
-
-		vreg_s2c_0p752: smps2 {
-			regulator-name = "vreg_s2c_0p752";
-			regulator-min-microvolt = <750000>;
-			regulator-max-microvolt = <800000>;
-		};
-
-		vreg_s5c_0p752: smps5 {
-			regulator-name = "vreg_s5c_0p752";
-			regulator-min-microvolt = <465000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		vreg_s7c_0p752: smps7 {
-			regulator-name = "vreg_s7c_0p752";
-			regulator-min-microvolt = <465000>;
-			regulator-max-microvolt = <800000>;
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2208000>;
 		};
 
 		vreg_s9c_1p084: smps9 {
@@ -499,7 +560,7 @@
 
 		vreg_l8c_1p62: ldo8 {
 			regulator-name = "vreg_l8c_1p62";
-			regulator-min-microvolt = <1620000>;
+			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
@@ -507,7 +568,7 @@
 		vreg_l9c_2p96: ldo9 {
 			regulator-name = "vreg_l9c_2p96";
 			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <35440000>;
+			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -527,7 +588,7 @@
 
 		vreg_l12c_1p65: ldo12 {
 			regulator-name = "vreg_l12c_1p65";
-			regulator-min-microvolt = <1650000>;
+			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
@@ -665,6 +726,14 @@
 	};
 };
 
+&lpass_va_macro {
+	status = "okay";
+};
+
+&lpass_wsa_macro {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -711,7 +780,7 @@
 &pcie1 {
 	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 
-	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
+	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
 	pinctrl-names = "default";
 
 	iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
@@ -744,10 +813,118 @@
 	};
 };
 
+&pm7325_temp_alarm {
+	io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8350c_pwm {
+	nvmem = <&pmk8350_sdam_21>,
+		<&pmk8350_sdam_22>;
+	nvmem-names = "lpg_chan_sdam",
+		      "lut_sdam";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	led@1 {
+		reg = <1>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <3>;
+		linux,default-trigger = "none";
+		default-state = "off";
+		panic-indicator;
+	};
+
+	led@2 {
+		reg = <2>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <2>;
+		linux,default-trigger = "none";
+		default-state = "off";
+	};
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <1>;
+		linux,default-trigger = "none";
+		default-state = "off";
+	};
+};
+
 &pmk8350_rtc {
 	status = "okay";
 };
 
+&pmk8350_vadc {
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		label = "xo_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@103 {
+		reg = <PM7325_ADC7_DIE_TEMP>;
+		label = "pm7325_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -758,11 +935,46 @@
 	status = "okay";
 };
 
+&qup_uart7_cts {
+	/*
+	 * Configure a bias-bus-hold on CTS to lower power
+	 * usage when Bluetooth is turned off. Bus hold will
+	 * maintain a low power state regardless of whether
+	 * the Bluetooth module drives the pin in either
+	 * direction or leaves the pin fully unpowered.
+	 */
+	bias-bus-hold;
+};
+
+&qup_uart7_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&qup_uart7_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
 &qupv3_id_0 {
+	firmware-name = "qcom/qcs6490/qupv3fw.elf";
 	status = "okay";
 };
 
 &qupv3_id_1 {
+	firmware-name = "qcom/qcs6490/qupv3fw.elf";
 	status = "okay";
 };
 
@@ -798,22 +1010,169 @@
 	status = "okay";
 };
 
+&sound {
+	compatible = "qcom,qcs6490-rb3gen2-sndcard";
+	model = "QCS6490-RB3Gen2";
+
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"VA DMIC0", "vdd-micb",
+			"VA DMIC1", "vdd-micb",
+			"VA DMIC2", "vdd-micb",
+			"VA DMIC3", "vdd-micb";
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>,
+				    <&swr2 0>, <&lpass_wsa_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		codec {
+			sound-dai = <&lpass_va_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		reset-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <1 2 3 7>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		reset-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <4 5 6 8>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <32 2>, /* ADSP */
 			       <48 4>; /* NFC */
+
+	bt_en: bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
 };
 
 &uart5 {
 	status = "okay";
 };
 
-&usb_1 {
+&uart7 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-1 = <&qup_uart7_sleep_cts>,
+		    <&qup_uart7_sleep_rts>,
+		    <&qup_uart7_sleep_tx>,
+		    <&qup_uart7_sleep_rx>;
+	pinctrl-names = "default",
+			"sleep";
+
 	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		max-speed = <3200000>;
+	};
 };
 
-&usb_1_dwc3 {
+&usb_1 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
@@ -878,7 +1237,7 @@
 
 &wifi {
 	memory-region = <&wlan_fw_mem>;
-	qcom,ath11k-calibration-variant = "Qualcomm_rb3gen2";
+	qcom,calibration-variant = "Qualcomm_rb3gen2";
 
 	status = "okay";
 };
@@ -945,3 +1304,8 @@
 		bias-pull-up;
 	};
 };
+
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
new file mode 100644
index 000000000000..9bcb869dd270
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "monaco.dtsi"
+#include "monaco-pmics.dtsi"
+/ {
+	model = "Qualcomm Technologies, Inc. QCS8300 Ride";
+	compatible = "qcom,qcs8300-ride", "qcom,qcs8300";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+		mmc0 = &sdhc_1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB2_VBUS";
+		gpio = <&pmm8650au_1_gpios 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb2_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s5c: smps5 {
+			regulator-name = "vreg_s5c";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-mode = "2500base-x";
+	phy-handle = <&phy0>;
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: phy@8 {
+			compatible = "ethernet-phy-id31c3.1c33";
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 4 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcs8300/a623_zap.mbn";
+};
+
+&pmm8650au_1_gpios {
+	usb2_en: usb2-en-state {
+		pins = "gpio7";
+		function = "normal";
+		output-enable;
+		power-source = <0>;
+	};
+};
+
+&iris {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs8300/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs8300/cdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_gpdsp {
+	firmware-name = "qcom/qcs8300/gpdsp0.mbn";
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	vmmc-supply = <&vreg_l8a>;
+	vqmmc-supply = <&vreg_s4a>;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	status = "okay";
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio5";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio6";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "host";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
index f6960e2d466a..e6ac529e6b72 100644
--- a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
@@ -367,7 +367,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &ufs_mem_hc {
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
index 759d1ec694b2..7fc2de0d3d5e 100644
--- a/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
@@ -4,8 +4,13 @@
  */
 /dts-v1/;
 
-#include "sa8775p-ride-r3.dts"
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-aqr115c.dtsi"
+
 / {
-	model = "Qualcomm QCS9100 Ride Rev3";
+	model = "Qualcomm Technologies, Inc. Lemans Ride Rev3";
 	compatible = "qcom,qcs9100-ride-r3", "qcom,qcs9100", "qcom,sa8775p";
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
index 979462dfec30..b0c5fdde56ae 100644
--- a/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
@@ -4,8 +4,13 @@
  */
 /dts-v1/;
 
-#include "sa8775p-ride.dts"
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-88ea1512.dtsi"
+
 / {
-	model = "Qualcomm QCS9100 Ride";
+	model = "Qualcomm Technologies, Inc. Lemans Ride";
 	compatible = "qcom,qcs9100-ride", "qcom,qcs9100", "qcom,sa8775p";
 };
diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
index e65305f8136c..d125fc77ae14 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@@ -22,20 +22,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	clocks {
-		xo_board: xo-board-clk {
-			compatible = "fixed-clock";
-			clock-frequency = <19200000>;
-			#clock-cells = <0>;
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
-	};
-
 	ppvar_sys: ppvar-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ppvar_sys";
@@ -239,6 +225,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &qup_i2c1_data_clk {
 	drive-strength = <2>;
 	bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 47c0dd31aaf2..846e5e5899aa 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -21,6 +21,20 @@
 
 	chosen: chosen { };
 
+	clocks {
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -33,7 +47,7 @@
 			enable-method = "psci";
 			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_0>;
 			l2_0: l2-cache {
 				compatible = "cache";
@@ -56,7 +70,7 @@
 			enable-method = "psci";
 			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_100>;
 			l2_100: l2-cache {
 				compatible = "cache";
@@ -74,7 +88,7 @@
 			enable-method = "psci";
 			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_200>;
 			l2_200: l2-cache {
 				compatible = "cache";
@@ -92,7 +106,7 @@
 			enable-method = "psci";
 			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_300>;
 			l2_300: l2-cache {
 				compatible = "cache";
@@ -1008,7 +1022,10 @@
 
 				iommus = <&apps_smmu 0xc0 0x0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>,
 				       <&usb_1_qmpphy>;
 				phy-names = "usb2-phy",
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 7a789b41c2f1..1b9ca957a94b 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -5,8 +5,9 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
-#include "qcm2290.dtsi"
+#include "agatti.dtsi"
 #include "pm4125.dtsi"
 
 / {
@@ -15,6 +16,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &uart3;
 		sdhc1 = &sdhc_1;
 		sdhc2 = &sdhc_2;
 	};
@@ -62,8 +64,8 @@
 	i2c2_gpio: i2c {
 		compatible = "i2c-gpio";
 
-		sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
-		scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -186,6 +188,53 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	sound {
+		compatible = "qcom,qrb2210-sndcard";
+		pinctrl-0 = <&lpi_i2s2_active>;
+		pinctrl-names = "default";
+		model = "Qualcomm-RB1-WSA8815-Speaker-DMIC0";
+
+		mm1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		mm2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		mm3-dai-link {
+			link-name = "MultiMedia3";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+			};
+		};
+
+		hdmi-i2s-dai-link {
+			link-name = "HDMI/I2S Playback";
+
+			codec {
+				sound-dai = <&lt9611_codec 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+		};
+	};
 };
 
 &cpu_pd0 {
@@ -212,10 +261,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/qcm2290/a702_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/qcm2290/a702_zap.mbn";
 };
 
 &i2c2_gpio {
@@ -321,6 +370,14 @@
 	status = "okay";
 };
 
+/* SECONDARY I2S uses 1 I2S SD Line for audio on LT9611UXC HDMI Bridge */
+&q6afedai {
+	dai@18 {
+		reg = <SECONDARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -549,6 +606,66 @@
 };
 
 &tlmm {
+	uart3_default: uart3-default-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart3_sleep: uart3-sleep-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	lt9611_rst_pin: lt9611-rst-state {
 		pins = "gpio41";
 		function = "gpio";
@@ -584,6 +701,28 @@
 	};
 };
 
+&uart3 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 11 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-0 = <&uart3_default>;
+	pinctrl-1 = <&uart3_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3950-bt";
+
+		vddio-supply = <&pm4125_l15>;
+		vddxo-supply = <&pm4125_l13>;
+		vddrf-supply = <&pm4125_l10>;
+		vddch0-supply = <&pm4125_l22>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		max-speed = <3200000>;
+	};
+};
+
 /* UART connected to the Micro-USB port via a FTDI chip */
 &uart4 {
 	compatible = "qcom,geni-debug-uart";
@@ -615,12 +754,16 @@
 	remote-endpoint = <&pm4125_ss_in>;
 };
 
+&venus {
+	status = "okay";
+};
+
 &wifi {
 	vdd-0.8-cx-mx-supply = <&pm4125_l7>;
 	vdd-1.8-xo-supply = <&pm4125_l13>;
 	vdd-1.3-rfa-supply = <&pm4125_l10>;
 	vdd-3.3-ch0-supply = <&pm4125_l22>;
-	qcom,ath10k-calibration-variant = "Thundercomm_RB1";
+	qcom,calibration-variant = "Thundercomm_RB1";
 	firmware-name = "qcm2290";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index a9540e92d3e6..0cd36c54632f 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -5,7 +5,10 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/usb/pd.h>
 #include "sm4250.dtsi"
 #include "pm6125.dtsi"
@@ -63,8 +66,8 @@
 	i2c2_gpio: i2c {
 		compatible = "i2c-gpio";
 
-		sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
-		scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -103,6 +106,53 @@
 		};
 	};
 
+	sound {
+		compatible = "qcom,qrb4210-rb2-sndcard";
+		pinctrl-0 = <&lpi_i2s2_active>;
+		pinctrl-names = "default";
+		model = "Qualcomm-RB2-WSA8815-Speakers-DMIC0";
+
+		mm1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		mm2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		mm3-dai-link {
+			link-name = "MultiMedia3";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+			};
+		};
+
+		hdmi-dai-link {
+			link-name = "HDMI Playback";
+
+			cpu {
+				sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&lt9611_codec 0>;
+			};
+		};
+	};
+
 	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VREG_HDMI_OUT_1P2";
@@ -195,10 +245,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/qrb4210/a610_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/qrb4210/a610_zap.mbn";
 };
 
 &i2c2_gpio {
@@ -318,6 +368,14 @@
 	status = "okay";
 };
 
+/* SECONDARY I2S uses 1 I2S SD Line for audio on LT9611UXC HDMI Bridge */
+&q6afedai {
+	dai@20 {
+		reg = <SECONDARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -545,7 +603,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &tlmm {
@@ -690,7 +748,7 @@
 	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
-	qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+	qcom,calibration-variant = "Thundercomm_RB2";
 	firmware-name = "qrb4210";
 
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso
index ae256c713a36..771baf7e09e6 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso
@@ -9,21 +9,6 @@
 #include <dt-bindings/clock/qcom,camcc-sm8250.h>
 #include <dt-bindings/gpio/gpio.h>
 
-/ {
-	reserved-memory {
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x0 0x8000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-};
-
-&camcc {
-	status = "okay";
-};
-
 &camss {
 	vdda-phy-supply = <&vreg_l5a_0p88>;
 	vdda-pll-supply = <&vreg_l9a_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 52eef88e882c..71b42e76f03d 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -594,11 +594,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sm8250/a650_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8250/a650_zap.mbn";
 };
 
 /* LS-I2C0 */
@@ -725,15 +724,11 @@
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
 #endif
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
@@ -964,6 +959,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -1003,15 +1003,21 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+	};
+
+	dai@3 {
+		direction = <Q6ASM_DAI_RX>;
+		is-compress-dai;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 	};
 };
 
@@ -1027,6 +1033,12 @@
 	no-mmc;
 };
 
+&slpi {
+	firmware-name = "qcom/sm8250/Thundercomm/RB5/slpi.mbn";
+
+	status = "okay";
+};
+
 &sound {
 	compatible = "qcom,qrb5165-rb5-sndcard";
 	pinctrl-0 = <&tert_mi2s_active>;
@@ -1036,10 +1048,7 @@
 		"SpkrLeft IN", "WSA_SPK1 OUT",
 		"SpkrRight IN", "WSA_SPK2 OUT",
 		"VA DMIC0", "vdd-micb",
-		"VA DMIC1", "vdd-micb",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+		"VA DMIC1", "vdd-micb";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
@@ -1062,6 +1071,14 @@
 		};
 	};
 
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
 	hdmi-dai-link {
 		link-name = "HDMI Playback";
 		cpu {
diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
index 1c781d9e24cf..439f5c327dc4 100644
--- a/arch/arm64/boot/dts/qcom/qru1000-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
@@ -22,20 +22,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	clocks {
-		xo_board: xo-board-clk {
-			compatible = "fixed-clock";
-			clock-frequency = <19200000>;
-			#clock-cells = <0>;
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
-	};
-
 	ppvar_sys: ppvar-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "ppvar_sys";
@@ -239,6 +225,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &qup_i2c1_data_clk {
 	drive-strength = <2>;
 	bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 9e9c7f81096b..388d5ecee949 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -326,7 +326,6 @@
 
 	phy-handle = <&rgmii_phy>;
 	phy-mode = "rgmii";
-	max-speed = <1000>;
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
@@ -383,12 +382,12 @@
 
 &remoteproc_adsp {
 	status = "okay";
-	firmware-name = "qcom/sa8155p/adsp.mdt";
+	firmware-name = "qcom/sa8155p/adsp.mbn";
 };
 
 &remoteproc_cdsp {
 	status = "okay";
-	firmware-name = "qcom/sa8155p/cdsp.mdt";
+	firmware-name = "qcom/sa8155p/cdsp.mbn";
 };
 
 &sdhc_2 {
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 2fd1dafe63ce..d28d69162427 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -35,7 +35,7 @@
 
 		port {
 			dp2_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp0_phy_out>;
+				remote-endpoint = <&mdss1_dp0_out>;
 			};
 		};
 	};
@@ -49,7 +49,7 @@
 
 		port {
 			dp3_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp1_phy_out>;
+				remote-endpoint = <&mdss1_dp1_out>;
 			};
 		};
 	};
@@ -63,7 +63,7 @@
 
 		port {
 			edp0_connector_in: endpoint {
-				remote-endpoint = <&mdss0_dp2_phy_out>;
+				remote-endpoint = <&mdss0_dp2_out>;
 			};
 		};
 	};
@@ -77,7 +77,7 @@
 
 		port {
 			edp1_connector_in: endpoint {
-				remote-endpoint = <&mdss0_dp3_phy_out>;
+				remote-endpoint = <&mdss0_dp3_out>;
 			};
 		};
 	};
@@ -91,7 +91,7 @@
 
 		port {
 			edp2_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp2_phy_out>;
+				remote-endpoint = <&mdss1_dp2_out>;
 			};
 		};
 	};
@@ -105,7 +105,7 @@
 
 		port {
 			edp3_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp3_phy_out>;
+				remote-endpoint = <&mdss1_dp3_out>;
 			};
 		};
 	};
@@ -149,13 +149,6 @@
 		enable-active-high;
 		regulator-always-on;
 	};
-
-	reserved-memory {
-		gpu_mem: gpu-mem@8bf00000 {
-			reg = <0 0x8bf00000 0 0x2000>;
-			no-map;
-		};
-	};
 };
 
 &apps_rsc {
@@ -345,11 +338,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sa8295p/a690_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sa8295p/a690_zap.mbn";
 };
 
 &gpu_smmu {
@@ -361,18 +353,12 @@
 };
 
 &mdss0_dp2 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp2_phy_out: endpoint {
-				remote-endpoint = <&edp0_connector_in>;
-			};
-		};
-	};
+&mdss0_dp2_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp0_connector_in>;
 };
 
 &mdss0_dp2_phy {
@@ -383,18 +369,12 @@
 };
 
 &mdss0_dp3 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp3_phy_out: endpoint {
-				remote-endpoint = <&edp1_connector_in>;
-			};
-		};
-	};
+&mdss0_dp3_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp1_connector_in>;
 };
 
 &mdss0_dp3_phy {
@@ -409,18 +389,12 @@
 };
 
 &mdss1_dp0 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp0_phy_out: endpoint {
-				remote-endpoint = <&dp2_connector_in>;
-			};
-		};
-	};
+&mdss1_dp0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&dp2_connector_in>;
 };
 
 &mdss1_dp0_phy {
@@ -431,18 +405,12 @@
 };
 
 &mdss1_dp1 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp1_phy_out: endpoint {
-				remote-endpoint = <&dp3_connector_in>;
-			};
-		};
-	};
+&mdss1_dp1_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&dp3_connector_in>;
 };
 
 &mdss1_dp1_phy {
@@ -453,18 +421,12 @@
 };
 
 &mdss1_dp2 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp2_phy_out: endpoint {
-				remote-endpoint = <&edp2_connector_in>;
-			};
-		};
-	};
+&mdss1_dp2_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp2_connector_in>;
 };
 
 &mdss1_dp2_phy {
@@ -475,18 +437,12 @@
 };
 
 &mdss1_dp3 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp3_phy_out: endpoint {
-				remote-endpoint = <&edp3_connector_in>;
-			};
-		};
-	};
+&mdss1_dp3_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp3_connector_in>;
 };
 
 &mdss1_dp3_phy {
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index 177b9dad6ff7..44177e9b64b5 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -155,7 +155,6 @@
 	snps,mtl-rx-config = <&ethernet0_mtl_rx_setup>;
 	snps,mtl-tx-config = <&ethernet0_mtl_tx_setup>;
 
-	max-speed = <1000>;
 	phy-handle = <&rgmii_phy>;
 	phy-mode = "rgmii-txid";
 
@@ -225,7 +224,6 @@
 
 	ethernet0_mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <1>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -257,7 +255,6 @@
 	snps,mtl-rx-config = <&ethernet1_mtl_rx_setup>;
 	snps,mtl-tx-config = <&ethernet1_mtl_tx_setup>;
 
-	max-speed = <1000>;
 	phy-mode = "rgmii-txid";
 
 	pinctrl-names = "default";
@@ -302,7 +299,6 @@
 
 	ethernet1_mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <1>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
index ae065ae92478..b25f0b2c9410 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
@@ -5,43 +5,13 @@
 
 /dts-v1/;
 
-#include "sa8775p-ride.dtsi"
+#include "lemans-auto.dtsi"
+
+#include "lemans-pmics.dtsi"
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-aqr115c.dtsi"
 
 / {
 	model = "Qualcomm SA8775P Ride Rev3";
 	compatible = "qcom,sa8775p-ride-r3", "qcom,sa8775p";
 };
-
-&ethernet0 {
-	phy-mode = "2500base-x";
-};
-
-&ethernet1 {
-	phy-mode = "2500base-x";
-};
-
-&mdio {
-	compatible = "snps,dwmac-mdio";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	sgmii_phy0: phy@8 {
-		compatible = "ethernet-phy-id31c3.1c33";
-		reg = <0x8>;
-		device_type = "ethernet-phy";
-		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <11000>;
-		reset-deassert-us = <70000>;
-	};
-
-	sgmii_phy1: phy@0 {
-		compatible = "ethernet-phy-id31c3.1c33";
-		reg = <0x0>;
-		device_type = "ethernet-phy";
-		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <11000>;
-		reset-deassert-us = <70000>;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 2e87fd760dbd..2d9028cd60be 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -5,43 +5,13 @@
 
 /dts-v1/;
 
-#include "sa8775p-ride.dtsi"
+#include "lemans-auto.dtsi"
+
+#include "lemans-pmics.dtsi"
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-88ea1512.dtsi"
 
 / {
 	model = "Qualcomm SA8775P Ride";
 	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
 };
-
-&ethernet0 {
-	phy-mode = "sgmii";
-};
-
-&ethernet1 {
-	phy-mode = "sgmii";
-};
-
-&mdio {
-	compatible = "snps,dwmac-mdio";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	sgmii_phy0: phy@8 {
-		compatible = "ethernet-phy-id0141.0dd4";
-		reg = <0x8>;
-		device_type = "ethernet-phy";
-		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <11000>;
-		reset-deassert-us = <70000>;
-	};
-
-	sgmii_phy1: phy@a {
-		compatible = "ethernet-phy-id0141.0dd4";
-		reg = <0xa>;
-		device_type = "ethernet-phy";
-		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <11000>;
-		reset-deassert-us = <70000>;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts b/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts
new file mode 100644
index 000000000000..74778a5b19ba
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sar2130p.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	model = "Qualcomm Snapdragon AR2 Gen1 Smart Viewer Development Kit";
+	compatible = "qcom,qar2130p", "qcom,sar2130p";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart11;
+		serial1 = &uart7;
+		i2c0 = &i2c8;
+		i2c1 = &i2c10;
+		mmc1 = &sdhc_1;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+	};
+
+	/* pm3003a on I2C0, should not be controlled */
+	vreg_ext_1p3: regulator-ext-1p3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_ext_1p3";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	/* EBI rail, used as LDO input, can not be part of PMIC config */
+	vreg_s10a_0p89: regulator-s10a-0p89 {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_s10a_0p89";
+		regulator-min-microvolt = <890000>;
+		regulator-max-microvolt = <890000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	thermal-zones {
+		sar2130p-thermal {
+			thermal-sensors = <&pm8150_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wifi-thermal {
+			thermal-sensors = <&pm8150_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <52000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			thermal-sensors = <&pm8150_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-0 = <&wlan_en_state>, <&bt_en_state>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s4a_0p95>;
+		vddio-supply = <&vreg_l15a_1p8>;
+		vddaon-supply = <&vreg_s4a_0p95>;
+		vdddig-supply = <&vreg_s4a_0p95>;
+		vddrfa1p2-supply = <&vreg_s4a_0p95>;
+		vddrfa1p8-supply = <&vreg_s5a_1p88>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s4a_0p95>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_ext_1p3>;
+		vdd-l6-l9-supply = <&vreg_s10a_0p89>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p88>;
+
+		vreg_s4a_0p95: smps6 {
+			regulator-name = "vreg_s4a_0p95";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p88: smps5 {
+			regulator-name = "vreg_s5a_1p88";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1a_0p91: ldo1 {
+			regulator-name = "vreg_l1a_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3080000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_1p2: ldo3 {
+			regulator-name = "vreg_l3a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo4 1.26 - system ? */
+
+		vreg_l5a_1p13: ldo5 {
+			regulator-name = "vreg_l5a_1p13";
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_0p6: ldo6 {
+			regulator-name = "vreg_l6a_0p6";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_0p88: ldo8 {
+			regulator-name = "vreg_l8a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo9 - LCX */
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-name = "vreg_l10a_2p95";
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo11 - LMX */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* no ldo13 */
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* no ldo16 - system */
+
+		vreg_l17a_3p26: ldo17 {
+			regulator-name = "vreg_l17a_3p26";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_1p2: ldo18 {
+			regulator-name = "vreg_l18a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sar2130p/a620_zap.mbn";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	ptn3222: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+
+		reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+		vdd3v3-supply = <&vreg_l2a_3p1>;
+		vdd1v8-supply = <&vreg_l15a_1p8>;
+
+		#phy-cells = <0>;
+	};
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l8a_0p88>;
+	vdda-pll-supply = <&vreg_l3a_1p2>;
+
+	status = "okay";
+};
+
+&pm8150_adc {
+	channel@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "xo_therm";
+	};
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "skin_therm";
+	};
+
+	channel@4e {
+		/* msm-5.10 uses ADC5_AMUX_THM2 / 0x0e, although there is a pullup */
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "wifi_therm";
+	};
+};
+
+&pm8150_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	skin-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wifi-therm@2 {
+		reg = <2>;
+		/* msm-5.10 uses ADC5_AMUX_THM2, although there is a pullup */
+		io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sar2130p/adsp.mbn";
+
+	status = "okay";
+};
+
+&sdhc_1 {
+	vmmc-supply = <&vreg_l10a_2p95>;
+	vqmmc-supply = <&vreg_l7a_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	bt_en_state: bt-enable-state {
+		pins = "gpio46";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio55";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio56";
+			function = "pcie0_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio57";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio58";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio59";
+			function = "pcie1_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_en_state: wlan-enable-state {
+		pins = "gpio45";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart7 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&uart11 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l8a_0p88>;
+	vdda12-supply = <&vreg_l3a_1p2>;
+
+	phys = <&ptn3222>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p91>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
new file mode 100644
index 000000000000..d65ad0df6865
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -0,0 +1,3587 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sar2130p-gcc.h>
+#include <dt-bindings/clock/qcom,sar2130p-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8550-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sar2130p-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+
+				l3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			l2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			l2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			l2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			cpu_sleep_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			cluster_sleep_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41002344>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <4562>;
+				min-residency-us = <8467>;
+			};
+
+			cluster_sleep_2: cluster-sleep-2 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <3638>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9862>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sar2130p", "qcom,scm";
+			qcom,dload-mode = <&tcsr_mutex 0x13000>;
+			interconnects = <&system_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sar2130p-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sar2130p-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>, <&cpu_sleep_1>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>, <&cpu_sleep_1>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>, <&cpu_sleep_1>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>, <&cpu_sleep_1>;
+		};
+
+		cluster_pd: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0>, <&cluster_sleep_1>, <&cluster_sleep_2>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_dt_log_mem: xbl-dt-log@80600000 {
+			reg = <0x0 0x80600000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@80640000 {
+			reg = <0x0 0x80640000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@80800000 {
+			reg = <0x0 0x80800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@80880000 {
+			reg = <0x0 0x80880000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump@808a0000 {
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@808e0000 {
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@808e4000 {
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@808ff000 {
+			reg = <0x0 0x808ff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem: smem@80900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		helios_ram_dump_mem: helios-ram-dump@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0xe00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84e00000 {
+			reg = <0x0 0x84e00000 0x0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@86f00000 {
+			reg = <0x0 0x86f00000 0x0 0x500000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@87600000 {
+			reg = <0x0 0x87600000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@89400000 {
+			reg = <0x0 0x89400000 0x0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8a300000 {
+			reg = <0x0 0x8a300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8a3a0000 {
+			reg = <0x0 0x8a310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@8a31a000 {
+			reg = <0x0 0x8a31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8a400000 {
+			reg = <0x0 0x8a400000 0x0 0x700000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc@a6e00000 {
+			no-map;
+			reg = <0x0 0xa6e00000 0x0 0x40000>;
+		};
+
+		global_sync_mem: global-sync@a6f00000 {
+			no-map;
+			reg = <0x0 0xa6f00000 0x0 0x100000>;
+		};
+
+		tz_stat_mem: tz-stat@e8800000 {
+			no-map;
+			reg = <0x0 0xe8800000 0x0 0x100000>;
+		};
+
+		tags_mem: tags@e8900000 {
+			no-map;
+			reg = <0x0 0xe8900000 0x0 0x500000>;
+		};
+
+		qtee_mem: qtee@e8e00000 {
+			no-map;
+			reg = <0x0 0xe8e00000 0x0 0x500000>;
+		};
+
+		trusted_apps_mem: trusted-apps@e9300000 {
+			no-map;
+			reg = <0x0 0xe9300000 0x0 0xc00000>;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sar2130p-gcc";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sar2130p-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x007c4000 0x0 0x1000>,
+			      <0x0 0x007c5000 0x0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			iommus = <&apps_smmu 0x160 0x0>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			interconnects = <&system_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 200000>;
+					opp-avg-kBps = <104000 0>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <2500000 1000000>;
+					opp-avg-kBps = <400000 0>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,sar2130p-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00900000 0x0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <3>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x76 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x63 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs0>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs0>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs0>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sar2130p-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0x0 0x00a00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x16 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c6: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi6: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi7: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-0 = <&qup_uart7_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+
+				status = "disabled";
+			};
+
+			i2c8: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi8: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi9: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi10: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			spi11: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_A2NOC_SNOC QCOM_ICC_TAG_ALWAYS
+						 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart11: serial@a94000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-0 = <&qup_uart11_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sar2130p-config-noc";
+			reg = <0x0 0x01500000 0x0 0x10>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sar2130p-system-noc";
+			reg = <0x0 0x01680000 0x0 0x29080>;
+			clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sar2130p-pcie-anoc";
+			reg = <0x0 0x016c0000 0x0 0xa080>;
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sar2130p-mmss-noc";
+			reg = <0x0 0x01740000 0x0 0x1f100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie0: pcie@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,sar2130p-pcie", "qcom,pcie-sm8550";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x60000000 0x0 0xf1d>,
+			      <0x0 0x60000f20 0x0 0xa8>,
+			      <0x0 0x60001000 0x0 0x1000>,
+			      <0x0 0x60100000 0x0 0x100000>,
+			      <0x0 0x01c0c000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+
+			pcieport0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sar2130p-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c06000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,sar2130p-pcie", "qcom,pcie-sm8550";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01c0b000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>,
+				 <&gcc GCC_QMIP_PCIE_AHB_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi",
+				      "qmip_pcie_ahb";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
+				    <0x100 &apps_smmu 0x1e01 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				<&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci", "link_down";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie1_ep: pcie-ep@1c08000 {
+			compatible = "qcom,sar2130p-pcie-ep";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40200000 0x0 0x1000000>,
+			      <0x0 0x01c0b000 0x0 0x1000>,
+			      <0x0 0x40002000 0x0 0x2000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio",
+				    "dma";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>,
+				 <&gcc GCC_QMIP_PCIE_AHB_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "aggre_noc_axi",
+				      "cnoc_sf_axi",
+				      "qmip_pcie_ahb";
+
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global",
+					  "doorbell",
+					  "dma";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+			iommus = <&apps_smmu 0x1e00 0x1>;
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_1_GDSC>;
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sar2130p-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sar2130p-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,sar2130p-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1806 0x0>;
+					};
+				};
+			};
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-621.0", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x2000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-843000000 {
+					opp-hz = /bits/ 64 <843000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-780000000 {
+					opp-hz = /bits/ 64 <780000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-644000000 {
+					opp-hz = /bits/ 64 <644000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-570000000 {
+					opp-hz = /bits/ 64 <570000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-235000000 {
+					opp-hz = /bits/ 64 <235000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					opp-supported-hw = <0x3>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-621.0", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03de0000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sar2130p-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sar2130p-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sar2130p-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0x0 0x088e3000 0x0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sar2130p-qmp-usb3-dp-phy";
+			reg = <0x0 0x088e8000 0x0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sar2130p-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x20 0x0>;
+				phys = <&usb_1_hsphy>,
+				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,is-utmi-l1-suspend;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,parkmode-disable-ss-quirk;
+
+				tx-fifo-resize;
+				dma-coherent;
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+						};
+					};
+				};
+			};
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sar2130p-mdss";
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem", "cpu-cfg";
+
+			iommus = <&apps_smmu 0x2000 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sar2130p-dpu";
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x3000>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sar2130p-dp",
+					     "qcom,sm8350-dp";
+				reg = <0x0 0xae90000 0x0 0x200>,
+				      <0x0 0xae90200 0x0 0x200>,
+				      <0x0 0xae90400 0x0 0xc00>,
+				      <0x0 0xae91000 0x0 0x400>,
+				      <0x0 0xae91400 0x0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sar2130p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sar2130p-dsi-phy-5nm";
+				reg = <0x0 0x0ae95000 0x0 0x200>,
+				      <0x0 0x0ae95200 0x0 0x280>,
+				      <0x0 0x0ae95500 0x0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sar2130p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae96000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sar2130p-dsi-phy-5nm";
+				reg = <0x0 0x0ae97000 0x0 0x200>,
+				      <0x0 0x0ae97200 0x0 0x280>,
+				      <0x0 0x0ae97500 0x0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sar2130p-dispcc";
+			reg = <0x0 0x0af00000 0x0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sar2130p-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 94>,
+					  <94 609 31>,
+					  <125 63 1>,
+					  <126 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sar2130p-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sar2130p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1000>, /* TM */
+			      <0x0 0x0c222000 0x0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
+		arbiter@c400000 {
+			compatible = "qcom,sar2130p-spmi-pmic-arb",
+				     "qcom,x1e80100-spmi-pmic-arb";
+			reg = <0x0 0x0c400000 0x0 0x3000>,
+			      <0x0 0x0c500000 0x0 0x400000>,
+			      <0x0 0x0c440000 0x0 0x80000>;
+			reg-names = "core", "chnls", "obsrvr";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			spmi_bus: spmi@c42d000 {
+				reg = <0x0 0x0c42d000 0x0 0x4000>,
+				      <0x0 0x0c4c0000 0x0 0x10000>;
+				reg-names = "cnfg", "intr";
+
+				interrupt-names = "periph_irq";
+				interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <4>;
+
+				#address-cells = <2>;
+				#size-cells = <0>;
+			};
+		};
+
+		ipcc: mailbox@ed18000 {
+			compatible = "qcom,sar2130p-ipcc", "qcom,ipcc";
+			reg = <0x0 0x0ed18000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sar2130p-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 156>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio2", "gpio3";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio22", "gpio23";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio95", "gpio96";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio91", "gpio92";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio109", "gpio110";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio28", "gpio30";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs0: qup-spi0-cs0-state {
+				pins = "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi0_cs1: qup-spi0-cs1-state {
+				pins = "gpio93";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio62";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio2", "gpio3", "gpio61";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio13";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio22", "gpio23", "gpio12";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi3_cs0: qup-spi3-cs0-state {
+				pins = "gpio19";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi3_cs1: qup-spi3-cs1-state {
+				pins = "gpio41";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi4_cs0: qup-spi4-cs0-state {
+				pins = "gpio23";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi4_cs1: qup-spi4-cs1-state {
+				pins = "gpio94";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio98";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio95", "gpio96", "gpio97";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio63";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio91", "gpio92", "gpio64";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio27";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio11";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio35";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio109", "gpio110", "gpio34";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio7";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio15";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio28", "gpio30", "gpio14";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_default: qup-uart7-default-state {
+				cts-pins {
+					pins = "gpio24";
+					function = "qup7";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rts-pins {
+					pins = "gpio25";
+					function = "qup7";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				rx-pins {
+					pins = "gpio27";
+					function = "qup7";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				tx-pins {
+					pins = "gpio26";
+					function = "qup7";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_uart11_default: qup-uart11-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sar2130p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			reg = <0x0 0x17200000 0x0 0x10000>,
+			      <0x0 0x17260000 0x0 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17240000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x17240000 0x0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
+					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
+			power-domains = <&cluster_pd>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sar2130p-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sar2130p-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_turbo: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sar2130p-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0x0 0x17d91000 0x0 0x1000>;
+			reg-names = "freq-domain0";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sar2130p-gem-noc";
+			reg = <0x0 0x19100000 0x0 0xa2080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		/*
+		 * Bootloader expects just cache-controller node instead of
+		 * the typical system-cache-controller
+		 */
+		llcc: cache-controller@19200000 {
+			compatible = "qcom,sar2130p-llcc";
+			reg = <0x0 0x19200000 0x0 0x80000>,
+			      <0x0 0x19300000 0x0 0x80000>,
+			      <0x0 0x19a00000 0x0 0x80000>,
+			      <0x0 0x19c00000 0x0 0x80000>,
+			      <0x0 0x19af0000 0x0 0x80000>,
+			      <0x0 0x19cf0000 0x0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base",
+				    "llcc_scratchpad_broadcast_base",
+				    "llcc_scratchpad_broadcast_and_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qfprom: qfprom@221c8000 {
+			compatible = "qcom,sar2130p-qfprom", "qcom,qfprom";
+			reg = <0x0 0x221c8000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			read-only;
+
+			gpu_speed_bin: gpu-speed-bin@119 {
+				reg = <0x119 0x2>;
+				bits = <5 8>;
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sar2130p-nsp-noc";
+			reg = <0x0 0x320c0000 0x0 0x10>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,sar2130p-lpass-ag-noc";
+			reg = <0x0 0x3c40000 0x0 0x10>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+			};
+		};
+
+		cpu0-thermal {
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <110000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cpu0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <110000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cpu1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <110000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <110000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: rip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu0_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nspss0-thermal {
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				nspss1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nspss1-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				nspss2-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nspss2-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				nspss2-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				ddr-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				camera0-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera1-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				camera1-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdmss-thermal {
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				mdmss-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index 3f0d3e33894a..1514da636269 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -31,7 +31,7 @@
 	};
 
 	reserved-memory {
-		zap_mem: zap-shader@80840000 {
+		gpu_mem: zap-shader@80840000 {
 			reg = <0x0 0x80840000 0 0x2000>;
 			no-map;
 		};
@@ -426,11 +426,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&zap_mem>;
-		firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn";
 };
 
 &mdss {
@@ -438,15 +437,11 @@
 };
 
 &mdss_dp {
-	data-lanes = <0 1>;
-
-	vdda-1p2-supply = <&vreg_l3c_1p2>;
-	vdda-0p9-supply = <&vreg_l4a_0p8>;
-
 	status = "okay";
 };
 
 &mdss_dp_out {
+	data-lanes = <0 1>;
 	remote-endpoint = <&ec_dp_in>;
 };
 
@@ -530,19 +525,19 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 
 	dai@3 {
-		reg = <3>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180-el2.dtso b/arch/arm64/boot/dts/qcom/sc7180-el2.dtso
new file mode 100644
index 000000000000..6e8da59597b6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-el2.dtso
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * sc7180 specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */
+&gpu_zap_shader {
+	status = "disabled";
+};
+
+/* Venus can be used in EL2 if booted similarly to ChromeOS devices. */
+&venus {
+	video-firmware {
+		iommus = <&apps_smmu 0x0c42 0x0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 0146fb0036d4..0bce3eefca2e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -39,6 +39,7 @@
  *
  */
 
+/delete-node/ &gpu_zap_shader;
 /delete-node/ &hyp_mem;
 /delete-node/ &xbl_mem;
 /delete-node/ &aop_mem;
@@ -323,15 +324,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&panel0_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index f57976906d63..8fee8d7a7d4c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -188,7 +188,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_HOMESTAR";
+	qcom,calibration-variant = "GO_HOMESTAR";
 };
 
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
index 655bea928e52..26514640a1ae 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
@@ -79,7 +79,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_KINGOFTOWN";
+	qcom,calibration-variant = "GO_KINGOFTOWN";
 };
 
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index c3fd6760de7a..eb9c9e713a89 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -69,7 +69,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_LAZOR";
+	qcom,calibration-variant = "GO_LAZOR";
 };
 
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
index 89034b6702f4..a2224de841b1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
@@ -59,5 +59,5 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_PAZQUEL360";
+	qcom,calibration-variant = "GO_PAZQUEL360";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index ac8d4589e3fb..4f5ab378cf8e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -12,11 +12,11 @@
 
 / {
 	thermal-zones {
-		5v-choke-thermal {
+		choke-5v-thermal {
 			thermal-sensors = <&pm6150_adc_tm 1>;
 
 			trips {
-				5v-choke-crit {
+				choke-5v-crit {
 					temperature = <125000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -181,7 +181,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_POMPOM";
+	qcom,calibration-variant = "GO_POMPOM";
 };
 
 /* PINCTRL - board-specific pinctrl */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
index 00229b1515e6..4bea97e4246e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -78,6 +78,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_rst>;
 		avdd-supply = <&ppvar_lcd>;
+		avee-supply = <&ppvar_lcd>;
 		pp1800-supply = <&v1p8_disp>;
 		pp3300-supply = <&pp3300_dx_edp>;
 		backlight = <&backlight>;
@@ -89,15 +90,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&panel_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
 };
 
 &sdhc_2 {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index d4925be3b1fc..6078308694ac 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -148,15 +148,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&panel_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
 };
 
 &pm6150_adc {
@@ -196,7 +192,7 @@
 };
 
 &wifi {
-	qcom,ath10k-calibration-variant = "GO_WORMDINGLER";
+	qcom,calibration-variant = "GO_WORMDINGLER";
 };
 
 /*
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 74ab321d3333..b398f69917f0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -41,6 +41,7 @@
  * required by the board dts.
  */
 
+/delete-node/ &gpu_zap_shader;
 /delete-node/ &hyp_mem;
 /delete-node/ &ipa_fw_mem;
 /delete-node/ &xbl_mem;
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 76fe314d2ad5..45b9864e3304 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc7180.h>
 #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
 #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
@@ -580,55 +581,55 @@
 		compatible = "arm,psci-1.0";
 		method = "smc";
 
-		cpu_pd0: cpu0 {
+		cpu_pd0: power-domain-cpu0 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd>;
 			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		cpu_pd1: cpu1 {
+		cpu_pd1: power-domain-cpu1 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd>;
 			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		cpu_pd2: cpu2 {
+		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd>;
 			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		cpu_pd3: cpu3 {
+		cpu_pd3: power-domain-cpu3 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd>;
 			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		cpu_pd4: cpu4 {
+		cpu_pd4: power-domain-cpu4 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd>;
 			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		cpu_pd5: cpu5 {
+		cpu_pd5: power-domain-cpu5 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd>;
 			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
 		};
 
-		cpu_pd6: cpu6 {
+		cpu_pd6: power-domain-cpu6 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd>;
 			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		cpu_pd7: cpu7 {
+		cpu_pd7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd>;
 			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
 		};
 
-		cluster_pd: cpu-cluster0 {
+		cluster_pd: power-domain-cluster {
 			#power-domain-cells = <0>;
 			domain-idle-states = <&cluster_sleep_pc
 					      &cluster_sleep_cx_ret
@@ -1473,6 +1474,12 @@
 			};
 		};
 
+		refgen: regulator@ff1000 {
+			compatible = "qcom,sc7180-refgen-regulator",
+				     "qcom,sdm845-refgen-regulator";
+			reg = <0x0 0x00ff1000 0x0 0x60>;
+		};
+
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sc7180-config-noc";
 			reg = <0 0x01500000 0 0x28000>;
@@ -2178,6 +2185,10 @@
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "gfx-mem";
 
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2896,6 +2907,31 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint { };
+				};
+			};
 		};
 
 		pmu@90b6300 {
@@ -3064,9 +3100,31 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,parkmode-disable-ss-quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -3092,14 +3150,6 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
 			interconnect-names = "video-mem", "cpu-cfg";
 
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -3193,7 +3243,7 @@
 			mdp: display-controller@ae01000 {
 				compatible = "qcom,sc7180-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -3282,14 +3332,18 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7180_CX>;
 
 				phys = <&mdss_dsi0_phy>;
 
+				refgen-supply = <&refgen>;
+
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3387,8 +3441,10 @@
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
+
 					port@0 {
 						reg = <0>;
+
 						dp_in: endpoint {
 							remote-endpoint = <&dpu_intf0_out>;
 						};
@@ -3396,6 +3452,7 @@
 
 					port@1 {
 						reg = <1>;
+
 						mdss_dp_out: endpoint { };
 					};
 				};
@@ -3431,8 +3488,8 @@
 			reg = <0 0x0af00000 0 0x200000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -3521,18 +3578,18 @@
 			#interrupt-cells = <4>;
 		};
 
-		sram@146aa000 {
+		sram@14680000 {
 			compatible = "qcom,sc7180-imem", "syscon", "simple-mfd";
-			reg = <0 0x146aa000 0 0x2000>;
+			reg = <0 0x14680000 0 0x2e000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ranges = <0 0 0x146aa000 0x2000>;
+			ranges = <0 0 0x14680000 0x2e000>;
 
-			pil-reloc@94c {
+			pil-reloc@2a94c {
 				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0xc8>;
+				reg = <0x2a94c 0xc8>;
 			};
 		};
 
@@ -3718,7 +3775,7 @@
 		};
 
 		apps_rsc: rsc@18200000 {
-			compatible = "qcom,rpmh-rsc";
+			compatible = "qcom,sc7180-rpmh-apps-rsc", "qcom,rpmh-rsc";
 			reg = <0 0x18200000 0 0x10000>,
 			      <0 0x18210000 0 0x10000>,
 			      <0 0x18220000 0 0x10000>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index 8b4239f13748..84c6d662b54f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -44,11 +44,6 @@
 			reg = <0x0 0x8ad00000 0x0 0x500000>;
 			no-map;
 		};
-
-		venus_mem: memory@8b200000 {
-			reg = <0x0 0x8b200000 0x0 0x500000>;
-			no-map;
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
index a90c70b1b73e..0e07429982bd 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
@@ -139,6 +139,7 @@ hp_i2c: &i2c2 {
 	vdd-micb-supply = <&pp1800_l2c>;
 	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>, <&lpass_dmic23_clk>,
 			<&lpass_dmic23_data>;
+	pinctrl-names = "default";
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 020ef666e35f..ce48e4cda170 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -141,6 +141,9 @@
 };
 
 &lpass_va_macro {
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 2ba4ea60cb14..5c5e4f1dd221 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -621,15 +621,13 @@ ap_ec_spi: &spi10 {
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "host";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
 
+	status = "okay";
+
 	/* 2.x hub on port 1 */
 	usb_hub_2_x: hub@1 {
 		compatible = "usbbda,5411";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index b5fe7356be48..3103f94cd685 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -81,11 +81,9 @@
 };
 
 &usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
 	dr_mode = "otg";
+
+	status = "okay";
 };
 
 &usb_2_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 7370aa0dbf0e..8cac4ce9c851 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/input/linux-event-codes.h>
-#include "sc7280.dtsi"
+#include "kodiak.dtsi"
 #include "pm7325.dtsi"
 #include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
@@ -412,6 +412,8 @@
 &lpass_va_macro {
 	status = "okay";
 	vdd-micb-supply = <&vreg_bob>;
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
+	pinctrl-names = "default";
 };
 
 &pcie1 {
@@ -518,11 +520,9 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "host";
+
+	status = "okay";
 };
 
 &usb_1_hsphy {
@@ -573,7 +573,7 @@
 	};
 };
 
-/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+/* PINCTRL - additions to nodes defined in kodiak.dtsi */
 
 &dp_hot_plug_det {
 	bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 7d1d5bbbbbd9..469a5d103e3d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -16,7 +16,7 @@
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
-#include "sc7280.dtsi"
+#include "kodiak.dtsi"
 
 /* PMICs depend on spmi_bus label and so must come after SoC */
 #include "pm7325.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index 62de4774c556..d86a31ddede2 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -151,11 +151,6 @@
 			no-map;
 		};
 
-		gpu_mem: gpu-region@98715000 {
-			reg = <0x0 0x98715000 0x0 0x2000>;
-			no-map;
-		};
-
 		cdsp_mem: cdsp-region@98900000 {
 			reg = <0x0 0x98900000 0x0 0x1400000>;
 			no-map;
@@ -355,11 +350,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn";
 };
 
 &i2c1 {
@@ -436,8 +430,6 @@
 };
 
 &mdss_edp {
-	data-lanes = <0 1 2 3>;
-
 	pinctrl-0 = <&edp_hpd_active>;
 	pinctrl-names = "default";
 
@@ -457,15 +449,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_edp_out: endpoint {
-				remote-endpoint = <&auo_b140han06_in>;
-			};
-		};
-	};
+&mdss_edp_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&auo_b140han06_in>;
 };
 
 &pcie3 {
@@ -681,10 +669,6 @@
 	status = "okay";
 };
 
-&xo_board_clk {
-	clock-frequency = <38400000>;
-};
-
 /* PINCTRL */
 
 &pmc8180c_gpios {
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index 79b4d293ea1e..aff398390eba 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -14,6 +14,8 @@
 #include "sc8180x.dtsi"
 #include "sc8180x-pmics.dtsi"
 
+/delete-node/ &gpu_mem;
+
 / {
 	model = "Qualcomm SC8180x Primus";
 	compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
@@ -442,11 +444,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
 };
 
 &i2c1 {
@@ -531,8 +532,6 @@
 };
 
 &mdss_edp {
-	data-lanes = <0 1 2 3>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&edp_hpd_active>;
 
@@ -551,15 +550,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_edp_out: endpoint {
-				remote-endpoint = <&auo_b133han05_in>;
-			};
-		};
-	};
+&mdss_edp_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&auo_b133han05_in>;
 };
 
 &pcie1 {
@@ -773,10 +768,6 @@
 	status = "okay";
 };
 
-&xo_board_clk {
-	clock-frequency = <38400000>;
-};
-
 /* PINCTRL */
 
 &pmc8180c_gpios {
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 745a7d0b8381..8319d892c6e4 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -5,9 +5,12 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8180x-camcc.h>
+#include <dt-bindings/clock/qcom,videocc-sm8150.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8180x.h>
@@ -643,6 +646,11 @@
 			no-map;
 		};
 
+		gpu_mem: memory@98715000 {
+			reg = <0x0 0x98715000 0x0 0x2000>;
+			no-map;
+		};
+
 		reserved@9d400000 {
 			reg = <0x0 0x9d400000 0x0 0x1000000>;
 			no-map;
@@ -1725,7 +1733,8 @@
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1733,30 +1742,27 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "ref",
-				      "tbu";
+				      "slave_q2a";
 
 			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
@@ -1846,7 +1852,8 @@
 				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1854,30 +1861,27 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_3_PIPE_CLK>,
 				 <&gcc GCC_PCIE_3_AUX_CLK>,
 				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_3_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_3_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "ref",
-				      "tbu";
+				      "slave_q2a";
 
 			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
@@ -1968,7 +1972,8 @@
 				     <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1976,30 +1981,27 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "ref",
-				      "tbu";
+				      "slave_q2a";
 
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
@@ -2090,7 +2092,8 @@
 				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -2098,30 +2101,27 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
 				 <&gcc GCC_PCIE_2_AUX_CLK>,
 				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_2_CLKREF_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "ref",
-				      "tbu";
+				      "slave_q2a";
 
 			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
@@ -2279,6 +2279,10 @@
 
 			status = "disabled";
 
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2535,6 +2539,12 @@
 			status = "disabled";
 		};
 
+		refgen: regulator@88e7000 {
+			compatible = "qcom,sc8180x-refgen-regulator",
+				     "qcom,sdm845-refgen-regulator";
+			reg = <0x0 0x088e7000 0x0 0x60>;
+		};
+
 		usb_prim_qmpphy: phy@88e8000 {
 			compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
 			reg = <0 0x088e8000 0 0x3000>;
@@ -2762,6 +2772,8 @@
 				iommus = <&apps_smmu 0x60 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_mp_hsphy0>,
 				       <&usb_mp_qmpphy0>,
 				       <&usb_mp_hsphy1>,
@@ -2825,6 +2837,8 @@
 				iommus = <&apps_smmu 0x140 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_prim_hsphy>, <&usb_prim_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
@@ -2902,6 +2916,8 @@
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_sec_hsphy>, <&usb_sec_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
@@ -2927,7 +2943,34 @@
 			};
 		};
 
-		mdss: mdss@ae00000 {
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sc8180x-videocc",
+				     "qcom,sm8150-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&rpmhpd SC8180X_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc8180x-camcc";
+			reg = <0 0x0ad00000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SC8180X_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sc8180x-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
@@ -2967,10 +3010,10 @@
 
 			status = "disabled";
 
-			mdss_mdp: mdp@ae01000 {
+			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sc8180x-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3061,7 +3104,8 @@
 			};
 
 			mdss_dsi0: dsi@ae94000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sc8180x-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
@@ -3087,6 +3131,8 @@
 				phys = <&mdss_dsi0_phy>;
 				phy-names = "dsi";
 
+				refgen-supply = <&refgen>;
+
 				status = "disabled";
 
 				ports {
@@ -3127,7 +3173,7 @@
 				};
 			};
 
-			mdss_dsi0_phy: dsi-phy@ae94400 {
+			mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -3147,7 +3193,8 @@
 			};
 
 			mdss_dsi1: dsi@ae96000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sc8180x-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae96000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
@@ -3173,6 +3220,8 @@
 				phys = <&mdss_dsi1_phy>;
 				phy-names = "dsi";
 
+				refgen-supply = <&refgen>;
+
 				status = "disabled";
 
 				ports {
@@ -3194,7 +3243,7 @@
 				};
 			};
 
-			mdss_dsi1_phy: dsi-phy@ae96400 {
+			mdss_dsi1_phy: phy@ae96400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
@@ -3226,16 +3275,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_prim_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3304,16 +3357,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX1_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK1_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_sec_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3374,7 +3431,8 @@
 				reg = <0 0xae9a000 0 0x200>,
 				      <0 0xae9a200 0 0x200>,
 				      <0 0xae9a400 0 0x600>,
-				      <0 0xae9aa00 0 0x400>;
+				      <0 0xae9aa00 0 0x400>,
+				      <0 0xae9b000 0 0x400>;
 				interrupt-parent = <&mdss>;
 				interrupts = <14>;
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3410,6 +3468,13 @@
 							remote-endpoint = <&dpu_intf5_out>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_edp_out: endpoint {
+						};
+					};
 				};
 
 				edp_opp_table: opp-table {
@@ -3459,10 +3524,10 @@
 			compatible = "qcom,sc8180x-dispcc";
 			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&edp_phy 0>,
@@ -3518,7 +3583,7 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
@@ -3701,6 +3766,7 @@
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 75adaa19d1c3..c53e00cae465 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -37,6 +37,20 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&kypd_vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "volume_up";
+			gpios = <&pmc8280_1_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+	};
+
 	pmic-glink {
 		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
 
@@ -211,11 +225,6 @@
 	};
 
 	reserved-memory {
-		gpu_mem: gpu-mem@8bf00000 {
-			reg = <0 0x8bf00000 0 0x2000>;
-			no-map;
-		};
-
 		linux,cma {
 			compatible = "shared-dma-pool";
 			size = <0x0 0x8000000>;
@@ -481,13 +490,24 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn";
 };
 
 &mdss0 {
@@ -534,15 +554,10 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp3_out: endpoint {
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+&mdss0_dp3_out {
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss0_dp3_phy {
@@ -686,7 +701,7 @@
 		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
 		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
 
-		qcom,ath11k-calibration-variant = "QC_8280XP_CRD";
+		qcom,calibration-variant = "QC_8280XP_CRD";
 	};
 };
 
@@ -737,6 +752,12 @@
 	status = "okay";
 };
 
+&remoteproc_slpi {
+	firmware-name = "qcom/sc8280xp/qcslpi8280.mbn";
+
+	status = "okay";
+};
+
 &sdc2 {
 	pinctrl-0 = <&sdc2_default_state>;
 	pinctrl-1 = <&sdc2_sleep_state>;
@@ -885,6 +906,14 @@
 		function = "normal";
 	};
 
+	kypd_vol_up_n: kypd-vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <0>; /* 3.3 V */
+		bias-pull-up;
+		input-enable;
+	};
+
 	misc_3p3_reg_en: misc-3p3-reg-en-state {
 		pins = "gpio2";
 		function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso
new file mode 100644
index 000000000000..cff3735a12dd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * sc8280xp specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */
+&gpu_zap_shader {
+	status = "disabled";
+};
+
+/*
+ * When running under QHEE, this IOMMU is controlled by the firmware,
+ * however when we take ownership of it in EL2, we need to configure
+ * it properly to use PCIe.
+ */
+&pcie2a {
+	iommu-map = <0 &pcie_smmu 0x20000 0x10000>;
+};
+
+&pcie2b {
+	iommu-map = <0 &pcie_smmu 0x30000 0x10000>;
+};
+
+&pcie3a {
+	iommu-map = <0 &pcie_smmu 0x40000 0x10000>;
+};
+
+&pcie3b {
+	iommu-map = <0 &pcie_smmu 0x50000 0x10000>;
+};
+
+&pcie4 {
+	iommu-map = <0 &pcie_smmu 0x60000 0x10000>;
+};
+
+&pcie_smmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
new file mode 100644
index 000000000000..9819454abe13
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
@@ -0,0 +1,1487 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ *
+ * Copyright (c) 2024, Tianyu Gao <gty0622@gmail.com>
+ * Copyright (c) 2024, Xuecong Chen <chenxuecong2009@outlook.com>
+ *
+ * Copyright (c) 2024, Pengyu Luo <mitltlatltl@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	chassis-type = "tablet";
+	model = "Matebook E Go";
+	compatible = "huawei,gaokun3", "qcom,sc8280xp";
+
+	aliases {
+		i2c4 = &i2c4;
+		i2c15 = &i2c15;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@c6200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xc6200000 0x0 0x02400000>;
+			width = <1600>;
+			height = <2560>;
+			stride = <(1600 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&mode_pin_active>, <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pmc8280_1_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		switch-mode {
+			label = "Tablet Mode Switch";
+			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&hastings_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		skin-temp-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&pmk8280_adc_tm 5>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb0_sbu_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&ucsi0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb1_sbu_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&ucsi1_sbu>;
+			};
+		};
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_default>, <&wlan_en>;
+
+		wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s10b>;
+		vddaon-supply = <&vreg_s12b>;
+		vddpmu-supply = <&vreg_s12b>;
+		vddpmumx-supply = <&vreg_s12b>;
+		vddpmucx-supply = <&vreg_s12b>;
+		vddrfa0p95-supply = <&vreg_s12b>;
+		vddrfa1p3-supply = <&vreg_s11b>;
+		vddrfa1p9-supply = <&vreg_s1c>;
+		vddpcie1p3-supply = <&vreg_s11b>;
+		vddpcie1p9-supply = <&vreg_s1c>;
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l1-l4-supply = <&vreg_s12b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b: ldo2 {
+			regulator-name = "vreg_l2b";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b: ldo5 {
+			regulator-name = "vreg_l5b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b: ldo7 {
+			regulator-name = "vreg_l7b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l9b: ldo9 {
+			regulator-name = "vreg_l9b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-bob-supply = <&vreg_vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1c>;
+		vdd-l2-l8-supply = <&vreg_s1c>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s11b>;
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_l2d: ldo2 {
+			regulator-name = "vreg_l2d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8d: ldo8 {
+			regulator-name = "vreg_l8d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10d: ldo10 {
+			regulator-name = "vreg_l10d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&i2c4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	touchscreen@4f {
+		compatible = "hid-over-i2c";
+		reg = <0x4f>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+
+};
+
+&i2c15 {
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&i2c15_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	embedded-controller@38 {
+		compatible = "huawei,gaokun3-ec";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 107 IRQ_TYPE_LEVEL_LOW>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ucsi0_hs_in: endpoint {
+						remote-endpoint = <&usb_0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ucsi0_ss_in: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					ucsi0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ucsi1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ucsi1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					ucsi1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie2a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	max-link-speed = <2>;
+
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pmk8280_adc_tm {
+	status = "okay";
+
+	sys-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&pmk8280_vadc {
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm1";
+	};
+
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm2";
+	};
+
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm3";
+	};
+
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm4";
+	};
+
+	channel@344 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm5";
+	};
+
+	channel@345 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm6";
+	};
+
+	channel@346 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm7";
+	};
+
+	channel@347 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm8";
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "SC8280XP-HUAWEI-MATEBOOKEGO";
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"VA DMIC0", "VA MIC BIAS1",
+			"VA DMIC1", "VA MIC BIAS1",
+			"VA DMIC2", "VA MIC BIAS3",
+			"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: wsa8830-left@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_1_sd_n_default>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+
+	right_spkr: wsa8830-right@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-0 = <&spkr_2_sd_n_default>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_dwc3_hs {
+	remote-endpoint = <&ucsi0_hs_in>;
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l9d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&ucsi0_ss_in>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&ucsi1_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&ucsi1_ss_in>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l1b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy1 {
+	vdda-pll-supply = <&vreg_l8d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy2 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy3 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l1b>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy1 {
+	vdda-phy-supply = <&vreg_l8d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_s10b>;
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+	status = "okay";
+};
+
+&pmc8280_1_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+
+	gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 4>;
+
+	bt_default: bt-default-state {
+		hstp-bt-en-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		hstp-sw-ctrl-pins {
+			pins = "gpio132";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	i2c4_default: i2c4-default-state {
+		pins = "gpio171", "gpio172";
+		function = "qup4";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c15_default: i2c15-default-state {
+		pins = "gpio36", "gpio37";
+		function = "qup15";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	mode_pin_active: mode-pin-state {
+		pins = "gpio26";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	spkr_1_sd_n_default: spkr-1-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio178";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spkr_2_sd_n_default: spkr-2-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio175";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		pins = "gpio164";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		pins = "gpio47";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-default-state {
+		reset-pins {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio134";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index f3190f408f4b..d84ca010ab9d 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -83,14 +83,11 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam_indicator_en>;
 
-		led-camera-indicator {
-			label = "white:camera-indicator";
+		privacy_led: privacy-led {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_WHITE>;
 			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
 			default-state = "off";
-			/* Reuse as a panic indicator until we get a "camera on" trigger */
 			panic-indicator;
 		};
 	};
@@ -283,11 +280,6 @@
 	};
 
 	reserved-memory {
-		gpu_mem: gpu-mem@8bf00000 {
-			reg = <0 0x8bf00000 0 0x2000>;
-			no-map;
-		};
-
 		linux,cma {
 			compatible = "shared-dma-pool";
 			size = <0x0 0x8000000>;
@@ -685,6 +677,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam_rgb_default>;
 
+		leds = <&privacy_led>;
+		led-names = "privacy";
+
 		clocks = <&camcc CAMCC_MCLK3_CLK>;
 
 		orientation = <0>;	/* Front facing */
@@ -708,13 +703,24 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn";
 };
 
 &mdss0 {
@@ -726,7 +732,7 @@
 };
 
 &mdss0_dp0_out {
-	data-lanes = <0 1>;
+	data-lanes = <0 1 2 3>;
 	remote-endpoint = <&usb_0_qmpphy_dp_in>;
 };
 
@@ -735,7 +741,7 @@
 };
 
 &mdss0_dp1_out {
-	data-lanes = <0 1>;
+	data-lanes = <0 1 2 3>;
 	remote-endpoint = <&usb_1_qmpphy_dp_in>;
 };
 
@@ -761,15 +767,10 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp3_out: endpoint {
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+&mdss0_dp3_out {
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss0_dp3_phy {
@@ -998,7 +999,7 @@
 		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
 		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
 
-		qcom,ath11k-calibration-variant = "LE_X13S";
+		qcom,calibration-variant = "LE_X13S";
 	};
 };
 
@@ -1090,20 +1091,11 @@
 };
 
 &pmk8280_rtc {
-	nvmem-cells = <&rtc_offset>;
-	nvmem-cell-names = "offset";
+	qcom,uefi-rtc-info;
 
 	status = "okay";
 };
 
-&pmk8280_sdam_6 {
-	status = "okay";
-
-	rtc_offset: rtc-offset@bc {
-		reg = <0xbc 0x4>;
-	};
-};
-
 &pmk8280_vadc {
 	channel@144 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
@@ -1186,6 +1178,12 @@
 	status = "okay";
 };
 
+&remoteproc_slpi {
+	firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcslpi8280.mbn";
+
+	status = "okay";
+};
+
 &rxmacro {
 	status = "okay";
 };
@@ -1202,9 +1200,6 @@
 		"VA DMIC0", "MIC BIAS1",
 		"VA DMIC1", "MIC BIAS1",
 		"VA DMIC2", "MIC BIAS3",
-		"VA DMIC0", "VA MIC BIAS1",
-		"VA DMIC1", "VA MIC BIAS1",
-		"VA DMIC2", "VA MIC BIAS3",
 		"TX SWR_ADC1", "ADC2_OUTPUT";
 
 	wcd-playback-dai-link {
@@ -1366,6 +1361,7 @@
 	vdda-phy-supply = <&vreg_l9d>;
 	vdda-pll-supply = <&vreg_l4d>;
 
+	mode-switch;
 	orientation-switch;
 
 	status = "okay";
@@ -1403,6 +1399,7 @@
 	vdda-phy-supply = <&vreg_l4b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
+	mode-switch;
 	orientation-switch;
 
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
index ae5daeac8fe2..f2b4470d4407 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
@@ -186,11 +186,6 @@
 	};
 
 	reserved-memory {
-		gpu_mem: gpu-mem@8bf00000 {
-			reg = <0 0x8bf00000 0 0x2000>;
-			no-map;
-		};
-
 		linux,cma {
 			compatible = "shared-dma-pool";
 			size = <0x0 0x8000000>;
@@ -448,13 +443,24 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn";
 };
 
 &mdss0 {
@@ -536,7 +542,7 @@
 		compatible = "pci17cb,1103";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 
-		qcom,ath11k-calibration-variant = "MS_SP9_5G";
+		qcom,calibration-variant = "MS_SP9_5G";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
new file mode 100644
index 000000000000..00bbeeef6f14
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
@@ -0,0 +1,1326 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ * Copyright (c) 2023, Merck Hung <merckhung@gmail.com>
+ * Copyright (c) 2023, 2024 Jens Glathe <jens.glathe@oldschoolsolutions.biz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	model = "Windows Dev Kit 2023";
+	compatible = "microsoft,blackrock", "qcom,sc8280xp";
+	chassis-type = "desktop";
+
+	aliases {
+		i2c4 = &i2c4;
+		i2c21 = &i2c21;
+		serial1 = &uart2;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	dp3_connector: connector {
+		compatible = "dp-connector";
+		label = "DP-3";
+		type = "mini";
+
+		dp-pwr-supply = <&vreg_misc_3p3>;
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp2_out>;
+			};
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+		/* Left-side rear port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "source";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		/* Left-side front port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "source";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&hastings_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&bt_default>, <&wlan_en>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s10b>;
+		vddaon-supply = <&vreg_s12b>;
+		vddpmu-supply = <&vreg_s12b>;
+		vddpmumx-supply = <&vreg_s12b>;
+		vddpmucx-supply = <&vreg_s12b>;
+		vddrfa0p95-supply = <&vreg_s12b>;
+		vddrfa1p3-supply = <&vreg_s11b>;
+		vddrfa1p9-supply = <&vreg_s1c>;
+		vddpcie1p3-supply = <&vreg_s11b>;
+		vddpcie1p9-supply = <&vreg_s1c>;
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s10-supply = <&vreg_vph_pwr>;
+		vdd-s11-supply = <&vreg_vph_pwr>;
+		vdd-s12-supply = <&vreg_vph_pwr>;
+		vdd-l1-l4-supply = <&vreg_s12b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-bob-supply = <&vreg_vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1c>;
+		vdd-l2-l8-supply = <&vreg_s1c>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s11b>;
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_l2d: ldo2 {
+			regulator-name = "vreg_l2d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+				 RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8d: ldo8 {
+			regulator-name = "vreg_l8d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10d: ldo10 {
+			regulator-name = "vreg_l10d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sc8280xp/microsoft/blackrock/qcdxkmsuc8280.mbn";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss0_dp2 {
+	compatible = "qcom,sc8280xp-dp";
+
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+};
+
+&mdss0_dp2_out {
+	remote-endpoint = <&dp1_connector_in>;
+};
+
+&mdss0_dp2_phy {
+	compatible = "qcom,sc8280xp-dp-phy";
+
+	vdda-phy-supply = <&vreg_l3b>;
+	vdda-pll-supply = <&vreg_l6b>;
+
+	status = "okay";
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie2a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l4d>;
+	vdda-pll-supply = <&vreg_l6d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	max-link-speed = <2>;
+
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+		qcom,calibration-variant = "MS_Volterra";
+	};
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l4d>;
+	vdda-pll-supply = <&vreg_l6d>;
+
+	status = "okay";
+};
+
+&pmc8280c_lpg {
+	status = "okay";
+};
+
+&pmk8280_adc_tm {
+	status = "okay";
+
+	sys-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_pon_resin {
+	status = "okay";
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&pmk8280_vadc {
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm1";
+	};
+
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm2";
+	};
+
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm3";
+	};
+
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm4";
+	};
+
+	channel@344 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm5";
+	};
+
+	channel@345 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm6";
+	};
+
+	channel@346 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm7";
+	};
+
+	channel@347 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm8";
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/microsoft/blackrock/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/microsoft/blackrock/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "microsoft/blackrock";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l4d>;
+	vdda-pll-supply = <&vreg_l9d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l3b>;
+	vdda-pll-supply = <&vreg_l4b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_2 {
+	pinctrl-0 = <&usb2_en_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>;
+	phy-names = "usb2-0", "usb3-0";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l1b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l1b>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_s10b>;
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+	status = "okay";
+};
+
+&pmc8280_1_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio8";
+		function = "normal";
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio9";
+		function = "normal";
+	};
+};
+
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&pmc8280c_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+	bt_default: bt-default-state {
+		hstp-bt-en-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		hstp-sw-ctrl-pins {
+			pins = "gpio132";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb2_en_state: usb2-en-state {
+		/* TS3USB221A USB2.0 mux select */
+		pins = "gpio24";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-default-state {
+		reset-pins {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio134";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 1e3babf2e40d..307df1d3dcd2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -32,6 +32,26 @@
 			};
 		};
 
+		pmc8280c_thermal: pmc8280c-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8280c_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
 		pm8280_2_thermal: pm8280-2-thermal {
 			polling-delay-passive = <100>;
 
@@ -51,6 +71,26 @@
 				};
 			};
 		};
+
+		pmr735a_thermal: pmr735a-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmr735a_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
 	};
 };
 
@@ -181,6 +221,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmc8280c_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmc8280c_gpios: gpio@8800 {
 			compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
@@ -212,7 +259,7 @@
 		pm8280_2_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&spmi_bus 0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>;
 			io-channel-names = "thermal";
 			#thermal-sensor-cells = <0>;
@@ -235,6 +282,15 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmr735a_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmk8280_vadc PMR735A_ADC7_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmr735a_gpios: gpio@8800 {
 			compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index ef06d1ac084d..5334adebf278 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -690,11 +691,21 @@
 			no-map;
 		};
 
+		pil_gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+
 		pil_adsp_mem: adsp-region@86c00000 {
 			reg = <0 0x86c00000 0 0x2000000>;
 			no-map;
 		};
 
+		pil_slpi_mem: slpi-region@88c00000 {
+			reg = <0 0x88c00000 0 0x1500000>;
+			no-map;
+		};
+
 		pil_nsp0_mem: cdsp0-region@8a100000 {
 			reg = <0 0x8a100000 0 0x1e00000>;
 			no-map;
@@ -783,6 +794,30 @@
 		};
 	};
 
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -883,6 +918,32 @@
 			};
 		};
 
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0x0>;
+
+			status = "disabled";
+		};
+
 		qup2: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x008c0000 0 0x2000>;
@@ -910,6 +971,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -926,6 +993,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -942,6 +1015,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -958,6 +1037,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -988,6 +1073,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1004,6 +1095,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1038,6 +1135,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1054,6 +1157,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1070,6 +1179,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1086,6 +1201,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1102,6 +1223,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1118,6 +1245,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1134,6 +1267,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1150,6 +1289,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1166,6 +1311,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1182,10 +1333,43 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 		};
 
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00900000 0 0x60000>;
+
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <13>;
+			dma-channel-mask = <0x1fff>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x576 0x0>;
+
+			status = "disabled";
+		};
+
 		qup0: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x009c0000 0 0x6000>;
@@ -1213,6 +1397,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1221,7 +1411,7 @@
 				reg = <0 0x00980000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1229,6 +1419,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1245,6 +1441,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1253,7 +1455,7 @@
 				reg = <0 0x00984000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1261,6 +1463,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1277,6 +1485,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1285,7 +1499,7 @@
 				reg = <0 0x00988000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1293,6 +1507,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1323,6 +1543,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1331,7 +1557,7 @@
 				reg = <0 0x0098c000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1339,6 +1565,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1355,6 +1587,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1363,7 +1601,7 @@
 				reg = <0 0x00990000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1371,6 +1609,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1387,6 +1631,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1395,7 +1645,7 @@
 				reg = <0 0x00994000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1403,6 +1653,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1419,6 +1675,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1427,7 +1689,7 @@
 				reg = <0 0x00998000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1435,6 +1697,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1451,6 +1719,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1459,7 +1733,7 @@
 				reg = <0 0x0099c000 0 0x4000>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
 				clock-names = "se";
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC8280XP_CX>;
@@ -1467,10 +1741,42 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 		};
 
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x96 0x0>;
+
+			status = "disabled";
+		};
+
 		qup1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x00ac0000 0 0x6000>;
@@ -1498,6 +1804,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1514,6 +1826,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1530,6 +1848,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1546,6 +1870,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1562,6 +1892,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1578,6 +1914,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1594,6 +1936,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1610,6 +1958,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1626,6 +1980,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1642,6 +2002,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1658,6 +2024,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1674,6 +2046,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1690,6 +2068,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1706,6 +2090,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1722,6 +2112,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1738,6 +2134,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 		};
@@ -1780,10 +2182,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
 				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
@@ -1893,10 +2295,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
 				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
@@ -2004,10 +2406,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
 				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
@@ -2118,10 +2520,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
 				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
@@ -2229,10 +2631,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
 				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
@@ -2454,296 +2856,79 @@
 			reg = <0x0 0x01fc0000 0x0 0x30000>;
 		};
 
-		gpu: gpu@3d00000 {
-			compatible = "qcom,adreno-690.0", "qcom,adreno";
-
-			reg = <0 0x03d00000 0 0x40000>,
-			      <0 0x03d9e000 0 0x1000>,
-			      <0 0x03d61000 0 0x800>;
-			reg-names = "kgsl_3d0_reg_memory",
-				    "cx_mem",
-				    "cx_dbgc";
-			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>;
-			operating-points-v2 = <&gpu_opp_table>;
-
-			qcom,gmu = <&gmu>;
-			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "gfx-mem";
-			#cooling-cells = <2>;
-
-			status = "disabled";
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-270000000 {
-					opp-hz = /bits/ 64 <270000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					opp-peak-kBps = <451000>;
-				};
+		remoteproc_slpi: remoteproc@2400000 {
+			compatible = "qcom,sc8280xp-slpi-pas", "qcom,sm8350-slpi-pas";
+			reg = <0 0x02400000 0 0x10000>;
 
-				opp-410000000 {
-					opp-hz = /bits/ 64 <410000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					opp-peak-kBps = <1555000>;
-				};
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
 
-				opp-500000000 {
-					opp-hz = /bits/ 64 <500000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					opp-peak-kBps = <1555000>;
-				};
-
-				opp-547000000 {
-					opp-hz = /bits/ 64 <547000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
-					opp-peak-kBps = <1555000>;
-				};
-
-				opp-606000000 {
-					opp-hz = /bits/ 64 <606000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					opp-peak-kBps = <2736000>;
-				};
-
-				opp-640000000 {
-					opp-hz = /bits/ 64 <640000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					opp-peak-kBps = <2736000>;
-				};
-
-				opp-655000000 {
-					opp-hz = /bits/ 64 <655000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					opp-peak-kBps = <2736000>;
-				};
-
-				opp-690000000 {
-					opp-hz = /bits/ 64 <690000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					opp-peak-kBps = <2736000>;
-				};
-			};
-		};
-
-		gmu: gmu@3d6a000 {
-			compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu";
-			reg = <0 0x03d6a000 0 0x34000>,
-			      <0 0x03de0000 0 0x10000>,
-			      <0 0x0b290000 0 0x10000>;
-			reg-names = "gmu", "rscc", "gmu_pdc";
-			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hfi", "gmu";
-			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
-				 <&gpucc GPU_CC_CXO_CLK>,
-				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
-				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
-				 <&gpucc GPU_CC_AHB_CLK>,
-				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
-				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
-			clock-names = "gmu",
-				      "cxo",
-				      "axi",
-				      "memnoc",
-				      "ahb",
-				      "hub",
-				      "smmu_vote";
-			power-domains = <&gpucc GPU_CC_CX_GDSC>,
-					<&gpucc GPU_CC_GX_GDSC>;
-			power-domain-names = "cx",
-					     "gx";
-			iommus = <&gpu_smmu 5 0xc00>;
-			operating-points-v2 = <&gmu_opp_table>;
-
-			gmu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-				};
-
-				opp-500000000 {
-					opp-hz = /bits/ 64 <500000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-				};
-			};
-		};
-
-		gpucc: clock-controller@3d90000 {
-			compatible = "qcom,sc8280xp-gpucc";
-			reg = <0 0x03d90000 0 0x9000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
-				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
-			clock-names = "bi_tcxo",
-				      "gcc_gpu_gpll0_clk_src",
-				      "gcc_gpu_gpll0_div_clk_src";
-
-			power-domains = <&rpmhpd SC8280XP_GFX>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
-		gpu_smmu: iommu@3da0000 {
-			compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu",
-				     "qcom,smmu-500", "arm,mmu-500";
-			reg = <0 0x03da0000 0 0x20000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <2>;
-			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
-				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
-				 <&gpucc GPU_CC_AHB_CLK>,
-				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
-				 <&gpucc GPU_CC_CX_GMU_CLK>,
-				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
-				 <&gpucc GPU_CC_HUB_AON_CLK>;
-			clock-names = "gcc_gpu_memnoc_gfx_clk",
-				      "gcc_gpu_snoc_dvm_gfx_clk",
-				      "gpu_cc_ahb_clk",
-				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
-				      "gpu_cc_cx_gmu_clk",
-				      "gpu_cc_hub_cx_int_clk",
-				      "gpu_cc_hub_aon_clk";
-
-			power-domains = <&gpucc GPU_CC_CX_GDSC>;
-			dma-coherent;
-		};
-
-		usb_0_hsphy: phy@88e5000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e5000 0 0x400>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy0: phy@88e7000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e7000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy1: phy@88e8000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e8000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy2: phy@88e9000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088e9000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_hsphy3: phy@88ea000 {
-			compatible = "qcom,sc8280xp-usb-hs-phy",
-				     "qcom,usb-snps-hs-5nm-phy";
-			reg = <0 0x088ea000 0 0x400>;
-			clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
-			clock-names = "ref";
-			resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_2_qmpphy0: phy@88ef000 {
-			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
-			reg = <0 0x088ef000 0 0x2000>;
-
-			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
-				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
-			clock-names = "aux", "ref", "com_aux", "pipe";
+			clock-names = "xo";
 
-			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
-				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
-			reset-names = "phy", "phy_phy";
+			power-domains = <&rpmhpd SC8280XP_LCX>,
+					<&rpmhpd SC8280XP_LMX>;
+			power-domain-names = "lcx", "lmx";
 
-			power-domains = <&gcc USB30_MP_GDSC>;
+			memory-region = <&pil_slpi_mem>;
 
-			#clock-cells = <0>;
-			clock-output-names = "usb2_phy0_pipe_clk";
+			qcom,qmp = <&aoss_qmp>;
 
-			#phy-cells = <0>;
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
 
 			status = "disabled";
-		};
-
-		usb_2_qmpphy1: phy@88f1000 {
-			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
-			reg = <0 0x088f1000 0 0x2000>;
 
-			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
-				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
-			clock-names = "aux", "ref", "com_aux", "pipe";
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
-			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
-				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
-			reset-names = "phy", "phy_phy";
+				label = "slpi";
+				qcom,remote-pid = <3>;
 
-			power-domains = <&gcc USB30_MP_GDSC>;
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-			#clock-cells = <0>;
-			clock-output-names = "usb2_phy1_pipe_clk";
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0521 0x0>;
+					};
 
-			#phy-cells = <0>;
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0522 0x0>;
+					};
 
-			status = "disabled";
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0523 0x0>;
+					};
+				};
+			};
 		};
 
 		remoteproc_adsp: remoteproc@3000000 {
 			compatible = "qcom,sc8280xp-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0 0x03000000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -3166,6 +3351,184 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-690.0", "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <451000>;
+				};
+
+				opp-410000000 {
+					opp-hz = /bits/ 64 <410000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-547000000 {
+					opp-hz = /bits/ 64 <547000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-606000000 {
+					opp-hz = /bits/ 64 <606000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-655000000 {
+					opp-hz = /bits/ 64 <655000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-690000000 {
+					opp-hz = /bits/ 64 <690000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <2736000>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu";
+			reg = <0 0x03d6a000 0 0x34000>,
+			      <0 0x03de0000 0 0x10000>,
+			      <0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&gpu_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sc8280xp-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+
+			power-domains = <&rpmhpd SC8280XP_GFX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpu_smmu: iommu@3da0000 {
+			compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
 		sdc2: mmc@8804000 {
 			compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
@@ -3209,6 +3572,71 @@
 			};
 		};
 
+		usb_0_hsphy: phy@88e5000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e5000 0 0x400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy0: phy@88e7000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e7000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy1: phy@88e8000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e8000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy2: phy@88e9000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e9000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy3: phy@88ea000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088ea000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		usb_0_qmpphy: phy@88eb000 {
 			compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
 			reg = <0 0x088eb000 0 0x4000>;
@@ -3256,6 +3684,60 @@
 			};
 		};
 
+		usb_2_qmpphy0: phy@88ef000 {
+			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+			reg = <0 0x088ef000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_qmpphy1: phy@88f1000 {
+			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+			reg = <0 0x088f1000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		refgen: regulator@8900000 {
+			compatible = "qcom,sc8280xp-refgen-regulator",
+				     "qcom,sm8250-refgen-regulator";
+			reg = <0x0 0x08900000 0x0 0x96>;
+		};
+
 		usb_1_hsphy: phy@8902000 {
 			compatible = "qcom,sc8280xp-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
@@ -3536,6 +4018,8 @@
 					    "usb2-2",
 					    "usb2-3";
 				dr_mode = "host";
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 			};
 		};
 
@@ -3593,6 +4077,8 @@
 				iommus = <&apps_smmu 0x820 0x0>;
 				phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
 				ports {
 					#address-cells = <1>;
@@ -3670,6 +4156,8 @@
 				iommus = <&apps_smmu 0x860 0x0>;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
 				ports {
 					#address-cells = <1>;
@@ -3900,26 +4388,26 @@
 				    "vfe3",
 				    "csid3";
 
-			interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 762 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 764 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csid1_lite",
 					  "vfe_lite1",
 					  "csiphy3",
@@ -4135,7 +4623,7 @@
 			mdss0_mdp: display-controller@ae01000 {
 				compatible = "qcom,sc8280xp-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -4233,15 +4721,19 @@
 					 <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
@@ -4312,14 +4804,18 @@
 					 <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
-					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
-						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -4389,10 +4885,12 @@
 					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
-					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss0>;
 				interrupts = <14>;
 				phys = <&mdss0_dp2_phy>;
@@ -4400,8 +4898,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
-						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp2_phy 0>,
+							 <&mdss0_dp2_phy 1>,
+							 <&mdss0_dp2_phy 1>;
 				operating-points-v2 = <&mdss0_dp2_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -4421,6 +4922,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss0_dp2_out: endpoint {
+						};
 					};
 				};
 
@@ -4493,6 +4997,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss0_dp3_out: endpoint {
+						};
 					};
 				};
 
@@ -4921,6 +5428,20 @@
 			};
 		};
 
+		pcie_smmu: iommu@14f80000 {
+			compatible = "arm,smmu-v3";
+			reg = <0 0x14f80000 0 0x80000>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 951 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 955 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 953 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq",
+					  "gerror",
+					  "cmdq-sync";
+			dma-coherent;
+			status = "reserved"; /* Controlled by QHEE. */
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
@@ -5254,7 +5775,7 @@
 
 		remoteproc_nsp0: remoteproc@1b300000 {
 			compatible = "qcom,sc8280xp-nsp0-pas";
-			reg = <0 0x1b300000 0 0x100>;
+			reg = <0 0x1b300000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -5385,7 +5906,7 @@
 
 		remoteproc_nsp1: remoteproc@21300000 {
 			compatible = "qcom,sc8280xp-nsp1-pas";
-			reg = <0 0x21300000 0 0x100>;
+			reg = <0 0x21300000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -5453,7 +5974,7 @@
 			mdss1_mdp: display-controller@22001000 {
 				compatible = "qcom,sc8280xp-dpu";
 				reg = <0 0x22001000 0 0x8f000>,
-				      <0 0x220b0000 0 0x2008>;
+				      <0 0x220b0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -5550,10 +6071,12 @@
 					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss1>;
 				interrupts = <12>;
 				phys = <&mdss1_dp0_phy>;
@@ -5561,8 +6084,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp0_phy 0>,
+							 <&mdss1_dp0_phy 1>,
+							 <&mdss1_dp0_phy 1>;
 				operating-points-v2 = <&mdss1_dp0_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -5582,6 +6108,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp0_out: endpoint {
+						};
 					};
 				};
 
@@ -5622,10 +6151,12 @@
 					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
-					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss1>;
 				interrupts = <13>;
 				phys = <&mdss1_dp1_phy>;
@@ -5633,8 +6164,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
-						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp1_phy 0>,
+							 <&mdss1_dp1_phy 1>,
+							 <&mdss1_dp1_phy 1>;
 				operating-points-v2 = <&mdss1_dp1_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -5654,6 +6188,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp1_out: endpoint {
+						};
 					};
 				};
 
@@ -5694,10 +6231,12 @@
 					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
-					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss1>;
 				interrupts = <14>;
 				phys = <&mdss1_dp2_phy>;
@@ -5705,8 +6244,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
-						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp2_phy 0>,
+							 <&mdss1_dp2_phy 1>,
+							 <&mdss1_dp2_phy 1>;
 				operating-points-v2 = <&mdss1_dp2_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -5726,6 +6268,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp2_out: endpoint {
+						};
 					};
 				};
 
@@ -5798,6 +6343,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp3_out: endpoint {
+						};
 					};
 				};
 
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index d402f4c85b11..74cb29cb7f1a 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -175,6 +175,7 @@
 	 * BAM DMA interconnects support is in place.
 	 */
 	/delete-property/ clocks;
+	/delete-property/ clock-names;
 };
 
 &blsp1_uart2 {
@@ -187,6 +188,7 @@
 	 * BAM DMA interconnects support is in place.
 	 */
 	/delete-property/ clocks;
+	/delete-property/ clock-names;
 };
 
 &blsp2_uart1 {
@@ -507,7 +509,7 @@
 	vdd-3.3-ch0-supply = <&vreg_l19a_3p3>;
 	vdd-3.3-ch1-supply = <&vreg_l8b_3p3>;
 
-	qcom,ath10k-calibration-variant = "Inforce_IFC6560";
+	qcom,calibration-variant = "Inforce_IFC6560";
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts b/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts
index c509bbfe5d3e..735a21df8cc9 100644
--- a/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts
+++ b/arch/arm64/boot/dts/qcom/sdm450-lenovo-tbx605f.dts
@@ -46,6 +46,18 @@
 		};
 	};
 
+	backlight: gpio-backlight {
+		compatible = "gpio-backlight";
+
+		gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+		default-on;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_enable_active>;
+		pinctrl-1 = <&backlight_enable_sleep>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		key-volume-up {
@@ -63,6 +75,49 @@
 	};
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8953_s3>;
+	vddio-supply = <&pm8953_l6>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "boe,tv101wum-ll2";
+		reg = <0>;
+
+		vsp-supply = <&lab>;
+		vsn-supply = <&ibb>;
+		reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+		backlight = <&backlight>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_reset_active>;
+		pinctrl-1 = <&panel_reset_sleep>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vcca-supply = <&pm8953_l3>;
+
+	status = "okay";
+};
+
 &hsusb_phy {
 	vdd-supply = <&pm8953_l3>;
 	vdda-pll-supply = <&pm8953_l7>;
@@ -90,6 +145,18 @@
 	};
 };
 
+&ibb {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	qcom,discharge-resistor-kohms = <32>;
+};
+
+&lab {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	qcom,soft-start-us = <800>;
+};
+
 &pm8953_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -237,6 +304,36 @@
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <135 4>;
 
+	backlight_enable_active: backlight-enable-active-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	backlight_enable_sleep: backlight-enable-sleep-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	panel_reset_active: panel-reset-active-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	panel_reset_sleep: panel-reset-sleep-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	ts_int_active: ts-int-active-state {
 		pins = "gpio65";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index a4b722e0fc1e..40522e237eac 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -157,7 +157,7 @@
 };
 
 &adsp_pil {
-	firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt";
+	firmware-name = "qcom/sdm630/Sony/nile/adsp.mbn";
 };
 
 &blsp_i2c1 {
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 19420cfdadf1..8b1a45a4e56e 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -4,6 +4,7 @@
  * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sdm660.h>
 #include <dt-bindings/clock/qcom,gpucc-sdm660.h>
 #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
@@ -508,6 +509,12 @@
 			reg = <0x0 0xfed00000 0x0 0xa00000>;
 			no-map;
 		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
 	};
 
 	smem: smem {
@@ -1055,7 +1062,7 @@
 					<&rpmpd SDM660_VDDMX>;
 			power-domain-names = "cx", "mx";
 
-			memory-region = <&mba_region>, <&mpss_region>;
+			memory-region = <&mba_region>, <&mpss_region>, <&mdata_mem>;
 
 			status = "disabled";
 
@@ -1300,6 +1307,8 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,parkmode-disable-ss-quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
 				phys = <&qusb2phy0>, <&usb3_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -1377,6 +1386,7 @@
 					<&xo_board>;
 			clock-names = "iface", "core", "xo";
 
+			resets = <&gcc GCC_SDCC2_BCR>;
 
 			interconnects = <&a2noc 3 &a2noc 10>,
 					<&gnoc 0 &cnoc 28>;
@@ -1431,6 +1441,8 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
+			resets = <&gcc GCC_SDCC1_BCR>;
+
 			interconnects = <&a2noc 2 &a2noc 10>,
 					<&gnoc 0 &cnoc 27>;
 			interconnect-names = "sdhc-ddr", "cpu-sdhc";
@@ -1505,6 +1517,8 @@
 				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 
 				/* This is the HS-only host */
 				maximum-speed = "high-speed";
@@ -1534,8 +1548,8 @@
 					<&sleep_clk>,
 					<&gcc GCC_MMSS_GPLL0_CLK>,
 					<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
-					<&mdss_dsi0_phy 1>,
-					<&mdss_dsi0_phy 0>,
+					<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+					<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 					<0>,
 					<0>,
 					<0>,
@@ -1657,8 +1671,8 @@
 
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
 						  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_BYTE0_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 2c1172aa97e4..55a45b528bd3 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -36,6 +36,14 @@
 		};
 	};
 
+	/* Dummy regulator until PMI632 has LCDB VSP/VSN support */
+	lcdb_dummy: regulator-lcdb-dummy {
+		compatible = "regulator-fixed";
+		regulator-name = "lcdb_dummy";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -44,11 +52,20 @@
 	};
 };
 
-&hsusb_phy {
+&gpu {
 	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/msm8953/fairphone/fp3/a506_zap.mbn";
+};
+
+&hsusb_phy {
 	vdd-supply = <&pm8953_l3>;
 	vdda-pll-supply = <&pm8953_l7>;
 	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
 };
 
 &i2c_3 {
@@ -81,12 +98,61 @@
 };
 
 &lpass {
+	firmware-name = "qcom/msm8953/fairphone/fp3/adsp.mbn";
+
 	status = "okay";
 };
 
-&pm8953_resin {
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8953_s3>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "djn,98-03057-6598b-i";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+		iovcc-supply = <&pm8953_l6>;
+		vsn-supply = <&lcdb_dummy>;
+		vsp-supply = <&lcdb_dummy>;
+
+		pinctrl-0 = <&mdss_te_default>;
+		pinctrl-names = "default";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vcca-supply = <&pm8953_l3>;
+	status = "okay";
+};
+
+&mpss {
+	firmware-name = "qcom/msm8953/fairphone/fp3/mba.mbn",
+			"qcom/msm8953/fairphone/fp3/modem.mbn";
+	pll-supply = <&pm8953_l7>;
+
 	status = "okay";
+};
+
+&pm8953_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &pmi632_lpg {
@@ -148,17 +214,19 @@
 };
 
 &sdhc_1 {
-	status = "okay";
 	vmmc-supply = <&pm8953_l8>;
 	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
 };
 
 &sdhc_2 {
-	status = "okay";
 	vmmc-supply = <&pm8953_l11>;
 	vqmmc-supply = <&pm8953_l12>;
 
 	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &rpm_requests {
@@ -175,10 +243,12 @@
 			regulator-min-microvolt = <984000>;
 			regulator-max-microvolt = <1240000>;
 		};
+
 		pm8953_s4: s4 {
 			regulator-min-microvolt = <1036000>;
 			regulator-max-microvolt = <2040000>;
 		};
+
 		pm8953_s5: s5 {
 			regulator-min-microvolt = <1036000>;
 			regulator-max-microvolt = <2040000>;
@@ -188,66 +258,82 @@
 			regulator-min-microvolt = <975000>;
 			regulator-max-microvolt = <1050000>;
 		};
+
 		pm8953_l2: l2 {
 			regulator-min-microvolt = <975000>;
 			regulator-max-microvolt = <1175000>;
 		};
+
 		pm8953_l3: l3 {
 			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <925000>;
 		};
+
 		pm8953_l5: l5 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		pm8953_l6: l6 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		pm8953_l7: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1900000>;
 		};
+
 		pm8953_l8: l8 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 		};
+
 		pm8953_l9: l9 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3300000>;
 		};
+
 		pm8953_l10: l10 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <3000000>;
 		};
+
 		pm8953_l11: l11 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 		};
+
 		pm8953_l12: l12 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2950000>;
 		};
+
 		pm8953_l13: l13 {
 			regulator-min-microvolt = <3125000>;
 			regulator-max-microvolt = <3125000>;
 		};
+
 		pm8953_l16: l16 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
+
 		pm8953_l17: l17 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
+
 		pm8953_l19: l19 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1350000>;
 		};
+
 		pm8953_l22: l22 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 		};
+
 		pm8953_l23: l23 {
 			regulator-min-microvolt = <975000>;
 			regulator-max-microvolt = <1225000>;
@@ -261,6 +347,13 @@
 	 * 135-138: fingerprint reader (SPI)
 	 */
 	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	mdss_te_default: mdss-te-default-state {
+		pins = "gpio24";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
 };
 
 &uart_0 {
@@ -276,9 +369,14 @@
 };
 
 &wcnss {
+	firmware-name = "qcom/msm8953/fairphone/fp3/wcnss.mbn";
+	vddpx-supply = <&pm8953_l5>;
+
 	status = "okay";
+};
 
-	vddpx-supply = <&pm8953_l5>;
+&wcnss_ctrl {
+	firmware-name = "qcom/msm8953/fairphone/fp3/WCNSS_qcom_wlan_nv.bin";
 };
 
 &wcnss_iris {
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 7167f75bced3..a9926ad6c6f9 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -107,6 +107,7 @@
 	status = "okay";
 
 	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
 };
 
@@ -404,6 +405,8 @@
 &sdhc_2 {
 	status = "okay";
 
+	cd-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
 	vmmc-supply = <&vreg_l5b_2p95>;
 	vqmmc-supply = <&vreg_l2b_2p95>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index 3164a4817e32..ef4a563c0feb 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -170,8 +170,8 @@
 
 		assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
 					<&mmcc PCLK1_CLK_SRC>;
-		assigned-clock-parents = <&mdss_dsi1_phy 0>,
-						<&mdss_dsi1_phy 1>;
+		assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+					 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 		clocks = <&mmcc MDSS_MDP_CLK>,
 				<&mmcc MDSS_BYTE1_CLK>,
@@ -239,10 +239,10 @@
 			<&sleep_clk>,
 			<&gcc GCC_MMSS_GPLL0_CLK>,
 			<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
-			<&mdss_dsi0_phy 1>,
-			<&mdss_dsi0_phy 0>,
-			<&mdss_dsi1_phy 1>,
-			<&mdss_dsi1_phy 0>,
+			<&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+			<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+			<&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+			<&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
 			<0>,
 			<0>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
index 176b0119fe6d..ed55646ca419 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -10,6 +10,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include "sdm670.dtsi"
@@ -32,6 +33,14 @@
 
 	aliases { };
 
+	battery: battery {
+		compatible = "simple-battery";
+
+		voltage-min-design-microvolt = <3312000>;
+		voltage-max-design-microvolt = <4400000>;
+		charge-full-design-microamp-hours = <3000000>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 
@@ -49,20 +58,6 @@
 		};
 	};
 
-	clocks {
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32764>;
-		};
-
-		xo_board: xo-board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <38400000>;
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -407,6 +402,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm670/sargo/a615_zap.mbn";
+};
+
 &i2c9 {
 	clock-frequency = <100000>;
 	status = "okay";
@@ -482,6 +485,28 @@
 	status = "okay";
 };
 
+&pm660_charger {
+	monitored-battery = <&battery>;
+	status = "okay";
+};
+
+&pm660_rradc {
+	status = "okay";
+};
+
+&pm660l_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>, <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &pm660l_gpios {
 	vol_up_pin: vol-up-state {
 		pins = "gpio7";
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index c93dd06c0b7d..b8a8dcbdfbe3 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -6,8 +6,11 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -28,6 +31,20 @@
 
 	chosen { };
 
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -617,6 +634,11 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			gpu_speed_bin: gpu_speed_bin@1a2 {
+				reg = <0x1a2 0x2>;
+				bits = <5 8>;
+			};
+
 			qusb2_hstx_trim: hstx-trim@1eb {
 				reg = <0x1eb 0x1>;
 				bits = <1 4>;
@@ -1102,6 +1124,12 @@
 			};
 		};
 
+		refgen: regulator@ff1000 {
+			compatible = "qcom,sdm670-refgen-regulator",
+				     "qcom,sdm845-refgen-regulator";
+			reg = <0x0 0x00ff1000 0x0 0x60>;
+		};
+
 		mem_noc: interconnect@1380000 {
 			compatible = "qcom,sdm670-mem-noc";
 			reg = <0 0x01380000 0 0x27200>;
@@ -1168,6 +1196,34 @@
 			gpio-ranges = <&tlmm 0 0 151>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			qup_i2c0_default: qup-i2c0-default-state {
 				pins = "gpio0", "gpio1";
 				function = "qup0";
@@ -1299,6 +1355,184 @@
 			};
 		};
 
+		gpu: gpu@5000000 {
+			compatible = "qcom,adreno-615.0", "qcom,adreno";
+
+			reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x10>;
+			reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+			/*
+			 * Look ma, no clocks! The GPU clocks and power are
+			 * controlled entirely by the GMU
+			 */
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			interconnects = <&mem_noc MASTER_GRAPHICS_3D 0 &mem_noc SLAVE_EBI_CH0 0>;
+			interconnect-names = "gfx-mem";
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-780000000 {
+					opp-hz = /bits/ 64 <780000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x8>;
+				};
+
+				opp-750000000 {
+					opp-hz = /bits/ 64 <750000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x8>;
+				};
+
+				opp-700000000 {
+					opp-hz = /bits/ 64 <700000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x4>;
+				};
+
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0xc>;
+				};
+
+				opp-565000000 {
+					opp-hz = /bits/ 64 <565000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0xc>;
+				};
+
+				opp-504000000 {
+					opp-hz = /bits/ 64 <504000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x2>;
+				};
+
+				opp-430000000 {
+					opp-hz = /bits/ 64 <430000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-355000000 {
+					opp-hz = /bits/ 64 <355000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <6220000>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-267000000 {
+					opp-hz = /bits/ 64 <267000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <4068000>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-180000000 {
+					opp-hz = /bits/ 64 <180000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1804000>;
+					opp-supported-hw = <0xf>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@5040000 {
+			compatible = "qcom,sdm670-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0 0x05040000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_CFG_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		gmu: gmu@506a000 {
+			compatible = "qcom,adreno-gmu-615.0", "qcom,adreno-gmu";
+
+			reg = <0 0x0506a000 0 0x30000>,
+			      <0 0x0b280000 0 0x10000>,
+			      <0 0x0b480000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,sdm845-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+		};
+
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sdm670-qusb2-phy", "qcom,qusb2-v2-phy";
 			reg = <0 0x088e2000 0 0x400>;
@@ -1400,6 +1634,184 @@
 			#interrupt-cells = <4>;
 		};
 
+		cci: cci@ac4a000 {
+			compatible = "qcom,sdm670-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4a000 0 0x4000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_CLK>;
+			clock-names = "camnoc_axi",
+				      "soc_ahb",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: isp@acb3000 {
+			compatible = "qcom,sdm670-camss";
+			reg = <0 0x0acb3000 0 0x1000>,
+			      <0 0x0acba000 0 0x1000>,
+			      <0 0x0acc8000 0 0x1000>,
+			      <0 0x0ac65000 0 0x1000>,
+			      <0 0x0ac66000 0 0x1000>,
+			      <0 0x0ac67000 0 0x1000>,
+			      <0 0x0acaf000 0 0x4000>,
+			      <0 0x0acb6000 0 0x4000>,
+			      <0 0x0acc4000 0 0x4000>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "vfe0",
+				    "vfe1",
+				    "vfe_lite";
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "vfe0",
+					  "vfe1",
+					  "vfe_lite";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&gcc GCC_CAMERA_AXI_CLK>,
+				 <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "csi0",
+				      "csi1",
+				      "csi2",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "gcc_camera_ahb",
+				      "gcc_camera_axi",
+				      "soc_ahb",
+				      "vfe0",
+				      "vfe0_axi",
+				      "vfe0_cphy_rx",
+				      "vfe1",
+				      "vfe1_axi",
+				      "vfe1_cphy_rx",
+				      "vfe_lite",
+				      "vfe_lite_cphy_rx";
+
+			iommus = <&apps_smmu 0x808 0x0>,
+				 <&apps_smmu 0x810 0x8>,
+				 <&apps_smmu 0xc08 0x0>,
+				 <&apps_smmu 0xc10 0x8>;
+
+			power-domains = <&camcc IFE_0_GDSC>,
+					<&camcc IFE_1_GDSC>,
+					<&camcc TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					camss_endpoint0: endpoint {
+						status = "disabled";
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					camss_endpoint1: endpoint {
+						status = "disabled";
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					camss_endpoint2: endpoint {
+						status = "disabled";
+					};
+				};
+			};
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sdm670-camcc", "qcom,sdm845-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sdm670-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -1431,7 +1843,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sdm670-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_AXI_CLK>,
@@ -1516,14 +1928,16 @@
 					      "bus";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM670_CX>;
 
 				phys = <&mdss_dsi0_phy>;
 
+				refgen-supply = <&refgen>;
+
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1590,13 +2004,16 @@
 					      "bus";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM670_CX>;
 
 				phys = <&mdss_dsi1_phy>;
 
+				refgen-supply = <&refgen>;
+
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1647,10 +2064,10 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <0>,
 				 <0>;
 			clock-names = "bi_tcxo",
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
deleted file mode 100644
index bd7c25bb8d35..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
-	model = "Google Cheza (rev1)";
-	compatible = "google,cheza-rev1", "qcom,sdm845";
-
-	/*
-	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
-	 */
-
-	/*
-	 * NOTE: Technically pp3500_a is not the exact same signal as
-	 * pp3500_a_vbob (there's a load switch between them and the EC can
-	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
-	 * view they are the same.
-	 */
-	pp3500_a:
-	pp3500_a_vbob: pp3500-a-vbob-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bob";
-
-		/*
-		 * Comes on automatically when pp5000_ldo comes on, which
-		 * comes on automatically when ppvar_sys comes on
-		 */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp3300_dx_edp: pp3300-dx-edp-regulator {
-		/* Yes, it's really 3.5 despite the name of the signal */
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&pp3500_a>;
-	};
-};
-
-/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
-
-/*
- * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
- * that limits them to 3.0, and trying to run at 3.3V with that old firmware
- * prevents the system from booting.
- */
-&src_pp3000_l19a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_pp3300_l22a {
-	/delete-property/regulator-boot-on;
-	/delete-property/regulator-always-on;
-};
-
-&src_pp3300_l28a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_vreg_bob {
-	regulator-min-microvolt = <3500000>;
-	regulator-max-microvolt = <3500000>;
-	vin-supply = <&pp3500_a_vbob>;
-};
-
-/*
- * NON-REGULATOR OVERRIDES
- * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
- */
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
-	gpio-line-names = "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "",
-			  "FP_RST_L",
-			  "FCAM_EN",
-			  "",
-			  "EDP_BRIJ_IRQ",
-			  "EC_IN_RW_ODL",
-			  "",
-			  "RCAM_MCLK",
-			  "FCAM_MCLK",
-			  "",
-			  "RCAM_EN",
-			  "CCI0_SDA",
-			  "CCI0_SCL",
-			  "CCI1_SDA",
-			  "CCI1_SCL",
-			  "FCAM_RST_L",
-			  "",
-			  "PEN_RST_L",
-			  "PEN_IRQ_L",
-			  "",
-			  "RCAM_VSYNC",
-			  "ESIM_MISO",
-			  "ESIM_MOSI",
-			  "ESIM_CLK",
-			  "ESIM_CS_L",
-			  "AP_PEN_1V8_SDA",
-			  "AP_PEN_1V8_SCL",
-			  "AP_TS_I2C_SDA",
-			  "AP_TS_I2C_SCL",
-			  "RCAM_RST_L",
-			  "",
-			  "AP_EDP_BKLTEN",
-			  "AP_BRD_ID1",
-			  "BOOT_CONFIG_4",
-			  "AMP_IRQ_L",
-			  "EDP_BRIJ_I2C_SDA",
-			  "EDP_BRIJ_I2C_SCL",
-			  "EN_PP3300_DX_EDP",
-			  "SD_CD_ODL",
-			  "BT_UART_RTS",
-			  "BT_UART_CTS",
-			  "BT_UART_RXD",
-			  "BT_UART_TXD",
-			  "AMP_I2C_SDA",
-			  "AMP_I2C_SCL",
-			  "AP_BRD_ID3",
-			  "",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "FORCED_USB_BOOT",
-			  "AMP_BCLK",
-			  "AMP_LRCLK",
-			  "AMP_DOUT",
-			  "AMP_DIN",
-			  "AP_BRD_ID2",
-			  "PEN_PDCT_L",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_LRCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "BT_SLIMBUS_DATA",
-			  "BT_SLIMBUS_CLK",
-			  "AMP_RESET_L",
-			  "",
-			  "FCAM_VSYNC",
-			  "",
-			  "AP_SKU_ID1",
-			  "EC_WOV_BCLK",
-			  "EC_WOV_LRCLK",
-			  "EC_WOV_DOUT",
-			  "",
-			  "",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-			  "AP_H1_SPI_CLK",
-			  "AP_H1_SPI_CS_L",
-			  "",
-			  "AP_SPI_CS0_L",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  "",
-			  "",
-			  "AP_SPI_CLK",
-			  "",
-			  "RFFE6_CLK",
-			  "RFFE6_DATA",
-			  "BOOT_CONFIG_1",
-			  "BOOT_CONFIG_2",
-			  "BOOT_CONFIG_0",
-			  "EDP_BRIJ_EN",
-			  "",
-			  "USB_HS_TX_EN",
-			  "UIM2_DATA",
-			  "UIM2_CLK",
-			  "UIM2_RST",
-			  "UIM2_PRESENT",
-			  "UIM1_DATA",
-			  "UIM1_CLK",
-			  "UIM1_RST",
-			  "",
-			  "AP_SKU_ID2",
-			  "SDM_GRFC_8",
-			  "SDM_GRFC_9",
-			  "AP_RST_REQ",
-			  "HP_IRQ",
-			  "TS_RESET_L",
-			  "PEN_EJECT_ODL",
-			  "HUB_RST_L",
-			  "FP_TO_AP_IRQ",
-			  "AP_EC_INT_L",
-			  "",
-			  "",
-			  "TS_INT_L",
-			  "AP_SUSPEND_L",
-			  "SDM_GRFC_3",
-			  "",
-			  "H1_AP_INT_ODL",
-			  "QLINK_REQ",
-			  "QLINK_EN",
-			  "SDM_GRFC_2",
-			  "BOOT_CONFIG_3",
-			  "WMSS_RESET_L",
-			  "SDM_GRFC_0",
-			  "SDM_GRFC_1",
-			  "RFFE3_DATA",
-			  "RFFE3_CLK",
-			  "RFFE4_DATA",
-			  "RFFE4_CLK",
-			  "RFFE5_DATA",
-			  "RFFE5_CLK",
-			  "GNSS_EN",
-			  "WCI2_LTE_COEX_RXD",
-			  "WCI2_LTE_COEX_TXD",
-			  "AP_RAM_ID1",
-			  "AP_RAM_ID2",
-			  "RFFE1_DATA",
-			  "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
deleted file mode 100644
index 2b7230594ecb..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
-	model = "Google Cheza (rev2)";
-	compatible = "google,cheza-rev2", "qcom,sdm845";
-
-	/*
-	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
-	 */
-
-	/*
-	 * NOTE: Technically pp3500_a is not the exact same signal as
-	 * pp3500_a_vbob (there's a load switch between them and the EC can
-	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
-	 * view they are the same.
-	 */
-	pp3500_a:
-	pp3500_a_vbob: pp3500-a-vbob-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bob";
-
-		/*
-		 * Comes on automatically when pp5000_ldo comes on, which
-		 * comes on automatically when ppvar_sys comes on
-		 */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp3300_dx_edp: pp3300-dx-edp-regulator {
-		/* Yes, it's really 3.5 despite the name of the signal */
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&pp3500_a>;
-	};
-};
-
-/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
-
-/*
- * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
- * that limits them to 3.0, and trying to run at 3.3V with that old firmware
- * prevents the system from booting.
- */
-&src_pp3000_l19a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_pp3300_l22a {
-	/delete-property/regulator-boot-on;
-	/delete-property/regulator-always-on;
-};
-
-&src_pp3300_l28a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_vreg_bob {
-	regulator-min-microvolt = <3500000>;
-	regulator-max-microvolt = <3500000>;
-	vin-supply = <&pp3500_a_vbob>;
-};
-
-/*
- * NON-REGULATOR OVERRIDES
- * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
- */
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
-	gpio-line-names = "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "BRIJ_SUSPEND",
-			  "FP_RST_L",
-			  "FCAM_EN",
-			  "",
-			  "EDP_BRIJ_IRQ",
-			  "EC_IN_RW_ODL",
-			  "",
-			  "RCAM_MCLK",
-			  "FCAM_MCLK",
-			  "",
-			  "RCAM_EN",
-			  "CCI0_SDA",
-			  "CCI0_SCL",
-			  "CCI1_SDA",
-			  "CCI1_SCL",
-			  "FCAM_RST_L",
-			  "FPMCU_BOOT0",
-			  "PEN_RST_L",
-			  "PEN_IRQ_L",
-			  "FPMCU_SEL_OD",
-			  "RCAM_VSYNC",
-			  "ESIM_MISO",
-			  "ESIM_MOSI",
-			  "ESIM_CLK",
-			  "ESIM_CS_L",
-			  "AP_PEN_1V8_SDA",
-			  "AP_PEN_1V8_SCL",
-			  "AP_TS_I2C_SDA",
-			  "AP_TS_I2C_SCL",
-			  "RCAM_RST_L",
-			  "",
-			  "AP_EDP_BKLTEN",
-			  "AP_BRD_ID1",
-			  "BOOT_CONFIG_4",
-			  "AMP_IRQ_L",
-			  "EDP_BRIJ_I2C_SDA",
-			  "EDP_BRIJ_I2C_SCL",
-			  "EN_PP3300_DX_EDP",
-			  "SD_CD_ODL",
-			  "BT_UART_RTS",
-			  "BT_UART_CTS",
-			  "BT_UART_RXD",
-			  "BT_UART_TXD",
-			  "AMP_I2C_SDA",
-			  "AMP_I2C_SCL",
-			  "AP_BRD_ID3",
-			  "",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "FORCED_USB_BOOT",
-			  "AMP_BCLK",
-			  "AMP_LRCLK",
-			  "AMP_DOUT",
-			  "AMP_DIN",
-			  "AP_BRD_ID2",
-			  "PEN_PDCT_L",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_LRCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "BT_SLIMBUS_DATA",
-			  "BT_SLIMBUS_CLK",
-			  "AMP_RESET_L",
-			  "",
-			  "FCAM_VSYNC",
-			  "",
-			  "AP_SKU_ID1",
-			  "EC_WOV_BCLK",
-			  "EC_WOV_LRCLK",
-			  "EC_WOV_DOUT",
-			  "",
-			  "",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-			  "AP_H1_SPI_CLK",
-			  "AP_H1_SPI_CS_L",
-			  "",
-			  "AP_SPI_CS0_L",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  "",
-			  "",
-			  "AP_SPI_CLK",
-			  "",
-			  "RFFE6_CLK",
-			  "RFFE6_DATA",
-			  "BOOT_CONFIG_1",
-			  "BOOT_CONFIG_2",
-			  "BOOT_CONFIG_0",
-			  "EDP_BRIJ_EN",
-			  "",
-			  "USB_HS_TX_EN",
-			  "UIM2_DATA",
-			  "UIM2_CLK",
-			  "UIM2_RST",
-			  "UIM2_PRESENT",
-			  "UIM1_DATA",
-			  "UIM1_CLK",
-			  "UIM1_RST",
-			  "",
-			  "AP_SKU_ID2",
-			  "SDM_GRFC_8",
-			  "SDM_GRFC_9",
-			  "AP_RST_REQ",
-			  "HP_IRQ",
-			  "TS_RESET_L",
-			  "PEN_EJECT_ODL",
-			  "HUB_RST_L",
-			  "FP_TO_AP_IRQ",
-			  "AP_EC_INT_L",
-			  "",
-			  "",
-			  "TS_INT_L",
-			  "AP_SUSPEND_L",
-			  "SDM_GRFC_3",
-			  "",
-			  "H1_AP_INT_ODL",
-			  "QLINK_REQ",
-			  "QLINK_EN",
-			  "SDM_GRFC_2",
-			  "BOOT_CONFIG_3",
-			  "WMSS_RESET_L",
-			  "SDM_GRFC_0",
-			  "SDM_GRFC_1",
-			  "RFFE3_DATA",
-			  "RFFE3_CLK",
-			  "RFFE4_DATA",
-			  "RFFE4_CLK",
-			  "RFFE5_DATA",
-			  "RFFE5_CLK",
-			  "GNSS_EN",
-			  "WCI2_LTE_COEX_RXD",
-			  "WCI2_LTE_COEX_TXD",
-			  "AP_RAM_ID1",
-			  "AP_RAM_ID2",
-			  "RFFE1_DATA",
-			  "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
deleted file mode 100644
index 1ba67be08f81..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
-	model = "Google Cheza (rev3+)";
-	compatible = "google,cheza", "qcom,sdm845";
-};
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
-	gpio-line-names = "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "BRIJ_SUSPEND",
-			  "FP_RST_L",
-			  "FCAM_EN",
-			  "",
-			  "EDP_BRIJ_IRQ",
-			  "EC_IN_RW_ODL",
-			  "",
-			  "RCAM_MCLK",
-			  "FCAM_MCLK",
-			  "",
-			  "RCAM_EN",
-			  "CCI0_SDA",
-			  "CCI0_SCL",
-			  "CCI1_SDA",
-			  "CCI1_SCL",
-			  "FCAM_RST_L",
-			  "FPMCU_BOOT0",
-			  "PEN_RST_L",
-			  "PEN_IRQ_L",
-			  "FPMCU_SEL_OD",
-			  "RCAM_VSYNC",
-			  "ESIM_MISO",
-			  "ESIM_MOSI",
-			  "ESIM_CLK",
-			  "ESIM_CS_L",
-			  "AP_PEN_1V8_SDA",
-			  "AP_PEN_1V8_SCL",
-			  "AP_TS_I2C_SDA",
-			  "AP_TS_I2C_SCL",
-			  "RCAM_RST_L",
-			  "",
-			  "AP_EDP_BKLTEN",
-			  "AP_BRD_ID0",
-			  "BOOT_CONFIG_4",
-			  "AMP_IRQ_L",
-			  "EDP_BRIJ_I2C_SDA",
-			  "EDP_BRIJ_I2C_SCL",
-			  "EN_PP3300_DX_EDP",
-			  "SD_CD_ODL",
-			  "BT_UART_RTS",
-			  "BT_UART_CTS",
-			  "BT_UART_RXD",
-			  "BT_UART_TXD",
-			  "AMP_I2C_SDA",
-			  "AMP_I2C_SCL",
-			  "AP_BRD_ID2",
-			  "",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "FORCED_USB_BOOT",
-			  "AMP_BCLK",
-			  "AMP_LRCLK",
-			  "AMP_DOUT",
-			  "AMP_DIN",
-			  "AP_BRD_ID1",
-			  "PEN_PDCT_L",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_LRCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "BT_SLIMBUS_DATA",
-			  "BT_SLIMBUS_CLK",
-			  "AMP_RESET_L",
-			  "",
-			  "FCAM_VSYNC",
-			  "",
-			  "AP_SKU_ID0",
-			  "EC_WOV_BCLK",
-			  "EC_WOV_LRCLK",
-			  "EC_WOV_DOUT",
-			  "",
-			  "",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-			  "AP_H1_SPI_CLK",
-			  "AP_H1_SPI_CS_L",
-			  "",
-			  "AP_SPI_CS0_L",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  "",
-			  "",
-			  "AP_SPI_CLK",
-			  "",
-			  "RFFE6_CLK",
-			  "RFFE6_DATA",
-			  "BOOT_CONFIG_1",
-			  "BOOT_CONFIG_2",
-			  "BOOT_CONFIG_0",
-			  "EDP_BRIJ_EN",
-			  "",
-			  "USB_HS_TX_EN",
-			  "UIM2_DATA",
-			  "UIM2_CLK",
-			  "UIM2_RST",
-			  "UIM2_PRESENT",
-			  "UIM1_DATA",
-			  "UIM1_CLK",
-			  "UIM1_RST",
-			  "",
-			  "AP_SKU_ID1",
-			  "SDM_GRFC_8",
-			  "SDM_GRFC_9",
-			  "AP_RST_REQ",
-			  "HP_IRQ",
-			  "TS_RESET_L",
-			  "PEN_EJECT_ODL",
-			  "HUB_RST_L",
-			  "FP_TO_AP_IRQ",
-			  "AP_EC_INT_L",
-			  "",
-			  "",
-			  "TS_INT_L",
-			  "AP_SUSPEND_L",
-			  "SDM_GRFC_3",
-			  /*
-			   * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics
-			   * call it BIOS_FLASH_WP_R_L.
-			   */
-			  "AP_FLASH_WP_L",
-			  "H1_AP_INT_ODL",
-			  "QLINK_REQ",
-			  "QLINK_EN",
-			  "SDM_GRFC_2",
-			  "BOOT_CONFIG_3",
-			  "WMSS_RESET_L",
-			  "SDM_GRFC_0",
-			  "SDM_GRFC_1",
-			  "RFFE3_DATA",
-			  "RFFE3_CLK",
-			  "RFFE4_DATA",
-			  "RFFE4_CLK",
-			  "RFFE5_DATA",
-			  "RFFE5_CLK",
-			  "GNSS_EN",
-			  "WCI2_LTE_COEX_RXD",
-			  "WCI2_LTE_COEX_TXD",
-			  "AP_RAM_ID0",
-			  "AP_RAM_ID1",
-			  "RFFE1_DATA",
-			  "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
deleted file mode 100644
index 743c339ba108..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ /dev/null
@@ -1,1334 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza device tree source (common between revisions)
- *
- * Copyright 2018 Google LLC.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sdm845.dtsi"
-
-/* PMICs depend on spmi_bus label and so must come after SoC */
-#include "pm8005.dtsi"
-#include "pm8998.dtsi"
-
-/ {
-	aliases {
-		bluetooth0 = &bluetooth;
-		serial1 = &uart6;
-		serial0 = &uart9;
-		wifi0 = &wifi;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&cros_ec_pwm 0>;
-		enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-		power-supply = <&ppvar_sys>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ap_edp_bklten>;
-	};
-
-	/* FIXED REGULATORS - parents above children */
-
-	/* This is the top level supply and variable voltage */
-	ppvar_sys: ppvar-sys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "ppvar_sys";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* This divides ppvar_sys by 2, so voltage is variable */
-	src_vph_pwr: src-vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "src_vph_pwr";
-
-		/* EC turns on with switchcap_on_l; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp5000_a: pp5000-a-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "pp5000_a";
-
-		/* EC turns on with en_pp5000_a; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	src_vreg_bob: src-vreg-bob-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "src_vreg_bob";
-
-		/* EC turns on with vbob_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp3300_dx_edp: pp3300-dx-edp-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3300_dx_edp";
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&en_pp3300_dx_edp>;
-	};
-
-	/*
-	 * Apparently RPMh does not provide support for PM8998 S4 because it
-	 * is always-on; model it as a fixed regulator.
-	 */
-	src_pp1800_s4a: pm8998-smps4 {
-		compatible = "regulator-fixed";
-		regulator-name = "src_pp1800_s4a";
-
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&src_vph_pwr>;
-	};
-
-	/* BOARD-SPECIFIC TOP LEVEL NODES */
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pen_eject_odl>;
-
-		switch-pen-insert {
-			label = "Pen Insert";
-			/* Insert = low, eject = high */
-			gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
-			linux,code = <SW_PEN_INSERTED>;
-			linux,input-type = <EV_SW>;
-			wakeup-source;
-		};
-	};
-
-	panel: panel {
-		compatible = "innolux,p120zdg-bf1";
-		power-supply = <&pp3300_dx_edp>;
-		backlight = <&backlight>;
-		no-hpd;
-
-		panel_in: port {
-			panel_in_edp: endpoint {
-				remote-endpoint = <&sn65dsi86_out>;
-			};
-		};
-	};
-};
-
-&cpufreq_hw {
-	/delete-property/ interrupts-extended; /* reference to lmh_cluster[01] */
-};
-
-&psci {
-	/delete-node/ power-domain-cpu0;
-	/delete-node/ power-domain-cpu1;
-	/delete-node/ power-domain-cpu2;
-	/delete-node/ power-domain-cpu3;
-	/delete-node/ power-domain-cpu4;
-	/delete-node/ power-domain-cpu5;
-	/delete-node/ power-domain-cpu6;
-	/delete-node/ power-domain-cpu7;
-	/delete-node/ power-domain-cluster;
-};
-
-&cpus {
-	/delete-node/ domain-idle-states;
-};
-
-&cpu_idle_states {
-	little_cpu_sleep_0: cpu-sleep-0-0 {
-		compatible = "arm,idle-state";
-		idle-state-name = "little-power-down";
-		arm,psci-suspend-param = <0x40000003>;
-		entry-latency-us = <350>;
-		exit-latency-us = <461>;
-		min-residency-us = <1890>;
-		local-timer-stop;
-	};
-
-	little_cpu_sleep_1: cpu-sleep-0-1 {
-		compatible = "arm,idle-state";
-		idle-state-name = "little-rail-power-down";
-		arm,psci-suspend-param = <0x40000004>;
-		entry-latency-us = <360>;
-		exit-latency-us = <531>;
-		min-residency-us = <3934>;
-		local-timer-stop;
-	};
-
-	big_cpu_sleep_0: cpu-sleep-1-0 {
-		compatible = "arm,idle-state";
-		idle-state-name = "big-power-down";
-		arm,psci-suspend-param = <0x40000003>;
-		entry-latency-us = <264>;
-		exit-latency-us = <621>;
-		min-residency-us = <952>;
-		local-timer-stop;
-	};
-
-	big_cpu_sleep_1: cpu-sleep-1-1 {
-		compatible = "arm,idle-state";
-		idle-state-name = "big-rail-power-down";
-		arm,psci-suspend-param = <0x40000004>;
-		entry-latency-us = <702>;
-		exit-latency-us = <1061>;
-		min-residency-us = <4488>;
-		local-timer-stop;
-	};
-
-	cluster_sleep_0: cluster-sleep-0 {
-		compatible = "arm,idle-state";
-		idle-state-name = "cluster-power-down";
-		arm,psci-suspend-param = <0x400000F4>;
-		entry-latency-us = <3263>;
-		exit-latency-us = <6562>;
-		min-residency-us = <9987>;
-		local-timer-stop;
-	};
-};
-
-&cpu0 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&little_cpu_sleep_0
-			   &little_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu1 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&little_cpu_sleep_0
-			   &little_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu2 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&little_cpu_sleep_0
-			   &little_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu3 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&little_cpu_sleep_0
-			   &little_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu4 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&big_cpu_sleep_0
-			   &big_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu5 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&big_cpu_sleep_0
-			   &big_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu6 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&big_cpu_sleep_0
-			   &big_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu7 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&big_cpu_sleep_0
-			   &big_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&lmh_cluster0 {
-	status = "disabled";
-};
-
-&lmh_cluster1 {
-	status = "disabled";
-};
-
-/*
- * Reserved memory changes
- *
- * Putting this all together (out of order with the rest of the file) to keep
- * all modifications to the memory map (from sdm845.dtsi) in one place.
- */
-
-/*
- * Our mpss_region is 8MB bigger than the default one and that conflicts
- * with venus_mem and cdsp_mem.
- *
- * For venus_mem we'll delete and re-create at a different address.
- *
- * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but
- * that also means we need to delete cdsp_pas.
- */
-/delete-node/ &venus_mem;
-/delete-node/ &cdsp_mem;
-/delete-node/ &cdsp_pas;
-/delete-node/ &gpu_mem;
-
-/* Increase the size from 120 MB to 128 MB */
-&mpss_region {
-	reg = <0 0x8e000000 0 0x8000000>;
-};
-
-/* Increase the size from 2MB to 8MB */
-&rmtfs_mem {
-	reg = <0 0x88f00000 0 0x800000>;
-};
-
-/ {
-	reserved-memory {
-		venus_mem: memory@96000000 {
-			reg = <0 0x96000000 0 0x500000>;
-			no-map;
-		};
-	};
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
-	pinctrl-1 = <&qspi_sleep>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-
-		/*
-		 * In theory chip supports up to 104 MHz and controller up
-		 * to 80 MHz, but above 25 MHz wasn't reliable so we'll use
-		 * that for now.  b:117440651
-		 */
-		spi-max-frequency = <25000000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-	};
-};
-
-
-&apps_rsc {
-	/delete-property/ power-domains;
-
-	regulators-0 {
-		compatible = "qcom,pm8998-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vdd-s1-supply = <&src_vph_pwr>;
-		vdd-s2-supply = <&src_vph_pwr>;
-		vdd-s3-supply = <&src_vph_pwr>;
-		vdd-s4-supply = <&src_vph_pwr>;
-		vdd-s5-supply = <&src_vph_pwr>;
-		vdd-s6-supply = <&src_vph_pwr>;
-		vdd-s7-supply = <&src_vph_pwr>;
-		vdd-s8-supply = <&src_vph_pwr>;
-		vdd-s9-supply = <&src_vph_pwr>;
-		vdd-s10-supply = <&src_vph_pwr>;
-		vdd-s11-supply = <&src_vph_pwr>;
-		vdd-s12-supply = <&src_vph_pwr>;
-		vdd-s13-supply = <&src_vph_pwr>;
-		vdd-l1-l27-supply = <&src_pp1025_s7a>;
-		vdd-l2-l8-l17-supply = <&src_pp1350_s3a>;
-		vdd-l3-l11-supply = <&src_pp1025_s7a>;
-		vdd-l4-l5-supply = <&src_pp1025_s7a>;
-		vdd-l6-supply = <&src_vph_pwr>;
-		vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>;
-		vdd-l9-supply = <&src_pp2040_s5a>;
-		vdd-l10-l23-l25-supply = <&src_vreg_bob>;
-		vdd-l13-l19-l21-supply = <&src_vreg_bob>;
-		vdd-l16-l28-supply = <&src_vreg_bob>;
-		vdd-l18-l22-supply = <&src_vreg_bob>;
-		vdd-l20-l24-supply = <&src_vreg_bob>;
-		vdd-l26-supply = <&src_pp1350_s3a>;
-		vin-lvs-1-2-supply = <&src_pp1800_s4a>;
-
-		src_pp1125_s2a: smps2 {
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-		};
-
-		src_pp1350_s3a: smps3 {
-			regulator-min-microvolt = <1352000>;
-			regulator-max-microvolt = <1352000>;
-		};
-
-		src_pp2040_s5a: smps5 {
-			regulator-min-microvolt = <1904000>;
-			regulator-max-microvolt = <2040000>;
-		};
-
-		src_pp1025_s7a: smps7 {
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1028000>;
-		};
-
-		vdd_qusb_hs0:
-		vdda_hp_pcie_core:
-		vdda_mipi_csi0_0p9:
-		vdda_mipi_csi1_0p9:
-		vdda_mipi_csi2_0p9:
-		vdda_mipi_dsi0_pll:
-		vdda_mipi_dsi1_pll:
-		vdda_qlink_lv:
-		vdda_qlink_lv_ck:
-		vdda_qrefs_0p875:
-		vdda_pcie_core:
-		vdda_pll_cc_ebi01:
-		vdda_pll_cc_ebi23:
-		vdda_sp_sensor:
-		vdda_ufs1_core:
-		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
-		src_pp875_l1a: ldo1 {
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_10:
-		src_pp1200_l2a: ldo2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-
-			/* TODO: why??? */
-			regulator-always-on;
-		};
-
-		pp1000_l3a_sdr845: ldo3 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdd_wcss_cx:
-		vdd_wcss_mx:
-		vdda_wcss_pll:
-		src_pp800_l5a: ldo5 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_13:
-		src_pp1800_l6a: ldo6 {
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <1856000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1800_l7a_wcn3990: ldo7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1200_l8a: ldo8 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1248000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1800_dx_pen:
-		src_pp1800_l9a: ldo9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_l10a: ldo10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1000_l11a_sdr845: ldo11 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1048000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdd_qfprom:
-		vdd_qfprom_sp:
-		vdda_apc1_cs_1p8:
-		vdda_gfx_cs_1p8:
-		vdda_qrefs_1p8:
-		vdda_qusb_hs0_1p8:
-		vddpx_11:
-		src_pp1800_l12a: ldo12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_2:
-		src_pp2950_l13a: ldo13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_l14a: ldo14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_l15a: ldo15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp2700_l16a: ldo16 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2704000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1300_l17a: ldo17 {
-			regulator-min-microvolt = <1304000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp2700_l18a: ldo18 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		/*
-		 * NOTE: this rail should have been called
-		 * src_pp3300_l19a in the schematic
-		 */
-		src_pp3000_l19a: ldo19 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp2950_l20a: ldo20 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp2950_l21a: ldo21 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp3300_hub:
-		src_pp3300_l22a: ldo22 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			/*
-			 * HACK: Should add a usb hub node and driver
-			 * to turn this on and off at suspend/resume time
-			 */
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		pp3300_l23a_ch1_wcn3990: ldo23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdda_qusb_hs0_3p1:
-		src_pp3075_l24a: ldo24 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3088000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp3300_l25a_ch0_wcn3990: ldo25 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1200_hub:
-		vdda_hp_pcie_1p2:
-		vdda_hv_ebi0:
-		vdda_hv_ebi1:
-		vdda_hv_ebi2:
-		vdda_hv_ebi3:
-		vdda_mipi_csi_1p25:
-		vdda_mipi_dsi0_1p2:
-		vdda_mipi_dsi1_1p2:
-		vdda_pcie_1p2:
-		vdda_ufs1_1p2:
-		vdda_ufs2_1p2:
-		vdda_usb1_ss_1p2:
-		vdda_usb2_ss_1p2:
-		src_pp1200_l26a: ldo26 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp3300_dx_pen:
-		src_pp3300_l28a: ldo28 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_lvs1: lvs1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		src_pp1800_lvs2: lvs2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm8005-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-s1-supply = <&src_vph_pwr>;
-		vdd-s2-supply = <&src_vph_pwr>;
-		vdd-s3-supply = <&src_vph_pwr>;
-		vdd-s4-supply = <&src_vph_pwr>;
-
-		src_pp600_s3c: smps3 {
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <600000>;
-		};
-	};
-};
-
-edp_brij_i2c: &i2c3 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	sn65dsi86_bridge: bridge@2d {
-		compatible = "ti,sn65dsi86";
-		reg = <0x2d>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_brij_en &edp_brij_irq>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-
-		enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
-
-		vpll-supply = <&src_pp1800_s4a>;
-		vccio-supply = <&src_pp1800_s4a>;
-		vcca-supply = <&src_pp1200_l2a>;
-		vcc-supply = <&src_pp1200_l2a>;
-
-		clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
-		clock-names = "refclk";
-
-		no-hpd;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				sn65dsi86_in: endpoint {
-					remote-endpoint = <&mdss_dsi0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				sn65dsi86_out: endpoint {
-					remote-endpoint = <&panel_in_edp>;
-				};
-			};
-		};
-	};
-};
-
-ap_pen_1v8: &i2c11 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	digitizer@9 {
-		compatible = "wacom,w9013", "hid-over-i2c";
-		reg = <0x9>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
-
-		vdd-supply = <&pp3300_dx_pen>;
-		vddl-supply = <&pp1800_dx_pen>;
-		post-power-on-delay-ms = <100>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-
-		hid-descr-addr = <0x1>;
-	};
-};
-
-amp_i2c: &i2c12 {
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-ap_ts_i2c: &i2c14 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	touchscreen@10 {
-		compatible = "elan,ekth3500";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_l &ts_reset_l>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
-
-		vcc33-supply = <&src_pp3300_l28a>;
-
-		reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&gmu {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-};
-
-&ipa {
-	qcom,gsi-loader = "modem";
-	status = "okay";
-};
-
-&lpasscc {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dsi0 {
-	status = "okay";
-	vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&sn65dsi86_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&mdss_dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
-/*
- * Cheza fw does not properly program the GPU aperture to allow the
- * GPU to update the SMMU pagetables for context switches.  Work
- * around this by dropping the "qcom,adreno-smmu" compat string.
- */
-&adreno_smmu {
-	compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
-};
-
-&mss_pil {
-	status = "okay";
-
-	iommus = <&apps_smmu 0x781 0x0>,
-		 <&apps_smmu 0x724 0x3>;
-};
-
-&pm8998_pwrkey {
-	status = "disabled";
-};
-
-&qupv3_id_0 {
-	status = "okay";
-	iommus = <&apps_smmu 0x0 0x3>;
-};
-
-&qupv3_id_1 {
-	status = "okay";
-	iommus = <&apps_smmu 0x6c0 0x3>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>;
-
-	vmmc-supply = <&src_pp2950_l21a>;
-	vqmmc-supply = <&vddpx_2>;
-
-	cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
-};
-
-&spi0 {
-	status = "okay";
-};
-
-&spi5 {
-	status = "okay";
-
-	tpm@0 {
-		compatible = "google,cr50";
-		reg = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&h1_ap_int_odl>;
-		spi-max-frequency = <800000>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <129 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&spi10 {
-	status = "okay";
-
-	cros_ec: ec@0 {
-		compatible = "google,cros-ec-spi";
-		reg = <0>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <122 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_ap_int_l>;
-		spi-max-frequency = <3000000>;
-		wakeup-source;
-
-		cros_ec_pwm: pwm {
-			compatible = "google,cros-ec-pwm";
-			#pwm-cells = <1>;
-		};
-
-		i2c_tunnel: i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			google,remote-bus = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-#include <arm/cros-ec-keyboard.dtsi>
-#include <arm/cros-ec-sbs.dtsi>
-
-&uart6 {
-	status = "okay";
-
-	pinctrl-0 = <&qup_uart6_4pin>;
-
-	bluetooth: bluetooth {
-		compatible = "qcom,wcn3990-bt";
-		vddio-supply = <&src_pp1800_s4a>;
-		vddxo-supply = <&pp1800_l7a_wcn3990>;
-		vddrf-supply = <&src_pp1300_l17a>;
-		vddch0-supply = <&pp3300_l25a_ch0_wcn3990>;
-		max-speed = <3200000>;
-	};
-};
-
-&uart9 {
-	status = "okay";
-};
-
-&ufs_mem_hc {
-	status = "okay";
-
-	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
-	vcc-supply = <&src_pp2950_l20a>;
-	vcc-max-microamp = <600000>;
-};
-
-&ufs_mem_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vdda_ufs1_core>;
-	vdda-pll-supply = <&vdda_ufs1_1p2>;
-};
-
-&usb_1 {
-	status = "okay";
-
-	/* We'll use this as USB 2.0 only */
-	qcom,select-utmi-as-pipe-clk;
-};
-
-&usb_1_dwc3 {
-	/*
-	 * The hardware design intends this port to be hooked up in peripheral
-	 * mode, so we'll hardcode it here.  Some details:
-	 * - SDM845 expects only a single Type C connector so it has only one
-	 *   native Type C port but cheza has two Type C connectors.
-	 * - The only source of DP is the single native Type C port.
-	 * - On cheza we want to be able to hook DP up to _either_ of the
-	 *   two Type C connectors and want to be able to achieve 4 lanes of DP.
-	 * - When you configure a Type C port for 4 lanes of DP you lose USB3.
-	 * - In order to make everything work, the native Type C port is always
-	 *   configured as 4-lanes DP so it's always available.
-	 * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then
-	 *   sent to the two Type C connectors.
-	 * - The extra USB2 lines from the native Type C port are always
-	 *   setup as "peripheral" so that we can mux them over to one connector
-	 *   or the other if someone needs the connector configured as a gadget
-	 *   (but they only get USB2 speeds).
-	 *
-	 * All the hardware muxes would allow us to hook things up in different
-	 * ways to some potential benefit for static configurations (you could
-	 * achieve extra USB2 bandwidth by using two different ports for the
-	 * two connectors or possibly even get USB3 peripheral mode), but in
-	 * each case you end up forcing to disconnect/reconnect an in-use
-	 * USB session in some cases depending on what you hotplug into the
-	 * other connector.  Thus hardcoding this as peripheral makes sense.
-	 */
-	dr_mode = "peripheral";
-
-	/*
-	 * We always need the high speed pins as 4-lanes DP in case someone
-	 * hotplugs a DP peripheral.  Thus limit this port to a max of high
-	 * speed.
-	 */
-	maximum-speed = "high-speed";
-
-	/*
-	 * We don't need the usb3-phy since we run in highspeed mode always, so
-	 * re-define these properties removing the superspeed USB PHY reference.
-	 */
-	phys = <&usb_1_hsphy>;
-	phy-names = "usb2-phy";
-};
-
-&usb_1_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vdda_usb1_ss_core>;
-	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
-	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
-	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
-	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
-
-&usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	/* We have this hooked up to a hub and we always use in host mode */
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vdda_usb2_ss_core>;
-	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
-	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
-};
-
-&usb_2_qmpphy {
-	status = "okay";
-
-	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
-	vdda-pll-supply = <&vdda_usb2_ss_core>;
-};
-
-&wifi {
-	status = "okay";
-
-	vdd-0.8-cx-mx-supply = <&src_pp800_l5a >;
-	vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>;
-	vdd-1.3-rfa-supply = <&src_pp1300_l17a>;
-	vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>;
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
-&qspi_cs0 {
-	bias-disable;		/* External pullup */
-};
-
-&qspi_clk {
-	bias-disable;		/* Rely on Cr50 internal pulldown */
-};
-
-&qspi_data0 {
-	bias-disable;		/* Rely on Cr50 internal pulldown */
-};
-
-&qspi_data1 {
-	bias-pull-down;
-};
-
-&qup_i2c3_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_i2c11_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_i2c12_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_i2c14_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_spi0_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_spi5_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_spi10_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_uart9_rx {
-	drive-strength = <2>;
-	bias-pull-up;
-};
-
-&qup_uart9_tx {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-/* PINCTRL - board-specific pinctrl */
-&pm8005_gpios {
-	gpio-line-names = "",
-			  "",
-			  "SLB",
-			  "";
-};
-
-&pm8998_adc {
-	channel@4d {
-		reg = <ADC5_AMUX_THM1_100K_PU>;
-		label = "sdm_temp";
-	};
-
-	channel@4e {
-		reg = <ADC5_AMUX_THM2_100K_PU>;
-		label = "quiet_temp";
-	};
-
-	channel@4f {
-		reg = <ADC5_AMUX_THM3_100K_PU>;
-		label = "lte_temp_1";
-	};
-
-	channel@50 {
-		reg = <ADC5_AMUX_THM4_100K_PU>;
-		label = "lte_temp_2";
-	};
-
-	channel@51 {
-		reg = <ADC5_AMUX_THM5_100K_PU>;
-		label = "charger_temp";
-	};
-};
-
-&pm8998_gpios {
-	gpio-line-names = "",
-			  "",
-			  "SW_CTRL",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "CFG_OPT1",
-			  "WCSS_PWR_REQ",
-			  "",
-			  "CFG_OPT2",
-			  "SLB";
-};
-
-&tlmm {
-	/*
-	 * pinctrl settings for pins that have no real owners.
-	 */
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&bios_flash_wp_r_l>,
-		    <&ap_suspend_l_deassert>;
-
-	pinctrl-1 = <&bios_flash_wp_r_l>,
-		    <&ap_suspend_l_assert>;
-
-	/*
-	 * Hogs prevent usermode from changing the value. A GPIO can be both
-	 * here and in the pinctrl section.
-	 */
-	ap-suspend-l-hog {
-		gpio-hog;
-		gpios = <126 GPIO_ACTIVE_LOW>;
-		output-low;
-	};
-
-	ap_edp_bklten: ap-edp-bklten-state {
-		pins = "gpio37";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	bios_flash_wp_r_l: bios-flash-wp-r-l-state {
-		pins = "gpio128";
-		function = "gpio";
-		bias-disable;
-	};
-
-	ec_ap_int_l: ec-ap-int-l-state {
-	       pins = "gpio122";
-	       function = "gpio";
-	       bias-pull-up;
-	};
-
-	edp_brij_en: edp-brij-en-state {
-		pins = "gpio102";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	edp_brij_irq: edp-brij-irq-state {
-		pins = "gpio10";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
-		pins = "gpio43";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	h1_ap_int_odl: h1-ap-int-odl-state {
-		pins = "gpio129";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	pen_eject_odl: pen-eject-odl-state {
-		pins = "gpio119";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	pen_irq_l: pen-irq-l-state {
-		pins = "gpio24";
-		function = "gpio";
-
-		/* Has external pullup */
-		bias-disable;
-	};
-
-	pen_pdct_l: pen-pdct-l-state {
-		pins = "gpio63";
-		function = "gpio";
-
-		/* Has external pullup */
-		bias-disable;
-	};
-
-	pen_rst_l: pen-rst-l-state {
-		pins = "gpio23";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-
-		/*
-		 * The pen driver doesn't currently support
-		 * driving this reset line.  By specifying
-		 * output-high here we're relying on the fact
-		 * that this pin has a default pulldown at boot
-		 * (which makes sure the pen was in reset if it
-		 * was powered) and then we set it high here to
-		 * take it out of reset.  Better would be if the
-		 * pen driver could control this and we could
-		 * remove "output-high" here.
-		 */
-		output-high;
-	};
-
-	qspi_sleep: qspi-sleep-state {
-		pins = "gpio90", "gpio91", "gpio92", "gpio95";
-
-		/*
-		 * When we're not actively transferring we want pins as GPIOs
-		 * with output disabled so that the quad SPI IP block stops
-		 * driving them. We rely on the normal pulls configured in
-		 * the active state and don't redefine them here. Also note
-		 * that we don't need the reverse (output-enable) in the
-		 * normal mode since the "output-enable" only matters for
-		 * GPIO function.
-		 */
-		function = "gpio";
-		output-disable;
-	};
-
-	sdc2_clk: sdc2-clk-state {
-		pins = "sdc2_clk";
-		bias-disable;
-
-		/*
-		 * It seems that mmc_test reports errors if drive
-		 * strength is not 16.
-		 */
-		drive-strength = <16>;
-	};
-
-	sdc2_cmd: sdc2-cmd-state {
-		pins = "sdc2_cmd";
-		bias-pull-up;
-		drive-strength = <16>;
-	};
-
-	sdc2_data: sdc2-data-state {
-		pins = "sdc2_data";
-		bias-pull-up;
-		drive-strength = <16>;
-	};
-
-	sd_cd_odl: sd-cd-odl-state {
-		pins = "gpio44";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	ts_int_l: ts-int-l-state {
-		pins = "gpio125";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	ts_reset_l: ts-reset-l-state {
-		pins = "gpio118";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-	};
-
-	ap_suspend_l_assert: ap-suspend-l-assert-state {
-		pins = "gpio126";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-		output-low;
-	};
-
-	ap_suspend_l_deassert: ap-suspend-l-deassert-state {
-		pins = "gpio126";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-		output-high;
-	};
-};
-
-&venus {
-	status = "okay";
-
-	video-firmware {
-		iommus = <&apps_smmu 0x10b2 0x0>;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
index 0a87df806caf..dbe1911d8e47 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@@ -9,17 +9,6 @@
 #include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/gpio/gpio.h>
 
-/ {
-	reserved-memory {
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x0 0x8000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-};
-
 &camss {
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l26a_1p2>;
@@ -55,7 +44,8 @@
 
 		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
 		clock-names = "xvclk";
-		clock-frequency = <19200000>;
+		assigned-clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+		assigned-clock-rates = <19200000>;
 
 		/*
 		 * The &vreg_s4a_1p8 trace is powered on as a,
@@ -79,45 +69,3 @@
 		};
 	};
 };
-
-&cci_i2c1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	camera@60 {
-		compatible = "ovti,ov7251";
-
-		/* I2C address as per ov7251.txt linux documentation */
-		reg = <0x60>;
-
-		/* CAM3_RST_N */
-		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam3_default>;
-
-		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
-		clock-names = "xclk";
-		clock-frequency = <24000000>;
-
-		/*
-		 * The &vreg_s4a_1p8 trace always powered on.
-		 *
-		 * The 2.8V vdda-supply regulator is enabled when the
-		 * vreg_s4a_1p8 trace is pulled high.
-		 * It too is represented by a fixed regulator.
-		 *
-		 * No 1.2V vddd-supply regulator is used.
-		 */
-		vdddo-supply = <&vreg_lvs1a_1p8>;
-		vdda-supply = <&cam3_avdd_2v8>;
-
-		status = "disabled";
-
-		port {
-			ov7251_ep: endpoint {
-				data-lanes = <0 1>;
-/*				remote-endpoint = <&csiphy3_ep>; */
-			};
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 1cc0f571e1f7..ce23f87e0316 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -18,7 +19,7 @@
 / {
 	model = "Thundercomm Dragonboard 845c";
 	compatible = "thundercomm,db845c", "qcom,sdm845";
-	qcom,msm-id = <341 0x20001>;
+	qcom,msm-id = <QCOM_ID_SDA845 0x20001>;
 	qcom,board-id = <8 0>;
 
 	aliases {
@@ -444,10 +445,6 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
@@ -458,10 +455,10 @@
 
 &gpu {
 	status = "okay";
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm845/a630_zap.mbn";
-	};
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm845/a630_zap.mbn";
 };
 
 &i2c10 {
@@ -537,15 +534,11 @@
 
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
@@ -559,18 +552,15 @@
 	qcom,dual-dsi-mode;
 
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_b>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi1_out {
+	remote-endpoint = <&lt9611_b>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi1_phy {
@@ -717,19 +707,19 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 
 	dai@3 {
-		reg = <3>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 		direction = <2>;
 		is-compress-dai;
 	};
@@ -756,6 +746,12 @@
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 };
 
+&slpi_pas {
+	firmware-name = "qcom/sdm845/Thundercomm/db845c/slpi.mbn";
+
+	status = "okay";
+};
+
 &sound {
 	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
 	pinctrl-0 = <&quat_mi2s_active
@@ -774,11 +770,7 @@
 		"DMIC2", "MIC BIAS3",
 		"DMIC3", "MIC BIAS3",
 		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MM_DL4",  "MultiMedia4 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
+		"SpkrRight IN", "SPK2 OUT";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
@@ -1166,7 +1158,7 @@
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
-	qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
+	qcom,calibration-variant = "Thundercomm_DB845C";
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 99dafc6716e7..0ee2f4b99fbd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -99,26 +99,15 @@
 			no-map;
 		};
 
-		/* rmtfs lower guard */
-		memory@f0800000 {
-			reg = <0 0xf0800000 0 0x1000>;
-			no-map;
-		};
-
-		rmtfs_mem: memory@f0801000 {
+		rmtfs_mem: rmtfs-region@f0800000 {
 			compatible = "qcom,rmtfs-mem";
-			reg = <0 0xf0801000 0 0x200000>;
+			reg = <0 0xf0800000 0 0x202000>;
+			qcom,use-guard-pages;
 			no-map;
 
 			qcom,client-id = <1>;
 			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
-
-		/* rmtfs upper guard */
-		memory@f0a01000 {
-			reg = <0 0xf0a01000 0 0x1000>;
-			no-map;
-		};
 	};
 
 	gpio-keys {
@@ -467,10 +456,6 @@
 
 &gpu {
 	status = "okay";
-
-	zap-shader {
-		memory-region = <&gpu_mem>;
-	};
 };
 
 &ipa {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
index a12723310c8b..09bfcef42402 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -47,10 +47,8 @@
 	firmware-name = "qcom/sdm845/judyln/cdsp.mbn";
 };
 
-&gpu {
-	zap-shader {
-		firmware-name = "qcom/sdm845/judyln/a630_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm845/judyln/a630_zap.mbn";
 };
 
 &mss_pil {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
index d17d4d4d5609..ffe1da2227f0 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
@@ -33,10 +33,8 @@
 	firmware-name = "qcom/sdm845/judyp/cdsp.mbn";
 };
 
-&gpu {
-	zap-shader {
-		firmware-name = "qcom/sdm845/judyp/a630_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm845/judyp/a630_zap.mbn";
 };
 
 &mss_pil {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 2391f842c903..091568642faa 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -414,17 +414,12 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm845/a630_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm845/a630_zap.mbn";
 };
 
 &i2c10 {
@@ -449,15 +444,6 @@
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&truly_in_0>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-
 	panel@0 {
 		compatible = "truly,nt35597-2K-display";
 		reg = <0>;
@@ -487,6 +473,11 @@
 	};
 };
 
+&mdss_dsi0_out {
+	remote-endpoint = <&truly_in_0>;
+	data-lanes = <0 1 2 3>;
+};
+
 &mdss_dsi0_phy {
 	status = "okay";
 	vdds-supply = <&vdda_mipi_dsi0_pll>;
@@ -499,16 +490,13 @@
 	qcom,dual-dsi-mode;
 
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&truly_in_1>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi1_out {
+	remote-endpoint = <&truly_in_1>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi1_phy {
@@ -789,7 +777,7 @@
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
-	qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp";
+	qcom,calibration-variant = "Qualcomm_sdm845mtp";
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 46e25c53829a..db6dd04c51bb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -21,6 +22,9 @@
 /delete-node/ &rmtfs_mem;
 
 / {
+	chassis-type = "handset";
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
+
 	aliases {
 		serial0 = &uart9;
 		serial1 = &uart6;
@@ -72,31 +76,19 @@
 
 	reserved-memory {
 		/*
-		 * The rmtfs_mem needs to be guarded due to "XPU limitations"
-		 * it is otherwise possible for an allocation adjacent to the
-		 * rmtfs_mem region to trigger an XPU violation, causing a crash.
-		 */
-		rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 {
-			no-map;
-			reg = <0 0xf5b00000 0 0x1000>;
-		};
-		/*
 		 * The rmtfs memory region in downstream is 'dynamically allocated'
 		 * but given the same address every time. Hard code it as this address is
 		 * where the modem firmware expects it to be.
 		 */
-		rmtfs_mem: rmtfs-mem@f5b01000 {
+		rmtfs_mem: rmtfs-region@f5b00000 {
 			compatible = "qcom,rmtfs-mem";
-			reg = <0 0xf5b01000 0 0x200000>;
+			reg = <0 0xf5b00000 0 0x202000>;
+			qcom,use-guard-pages;
 			no-map;
 
 			qcom,client-id = <1>;
 			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
-		rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 {
-			no-map;
-			reg = <0 0xf5d01000 0 0x1000>;
-		};
 
 		/*
 		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
@@ -158,6 +150,34 @@
 		enable-active-high;
 		regulator-boot-on;
 	};
+
+	panel_vci_3v3: panel-vci-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_VCI_3V";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&panel_vci_default>;
+		pinctrl-names = "default";
+		regulator-boot-on;
+	};
+
+	panel_vddi_poc_1p8: panel-vddi-poc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDI_POC";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&panel_poc_default>;
+		pinctrl-names = "default";
+		regulator-boot-on;
+	};
 };
 
 &adsp_pas {
@@ -345,17 +365,12 @@
 				<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
 };
 
 &i2c10 {
@@ -429,11 +444,15 @@
 		reg = <0>;
 
 		vddio-supply = <&vreg_l14a_1p88>;
+		vci-supply = <&panel_vci_3v3>;
+		poc-supply = <&panel_vddi_poc_1p8>;
 
+		te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
+		pinctrl-0 = <&panel_default>;
+		pinctrl-1 = <&panel_sleep>;
+		pinctrl-names = "default", "sleep";
 
 		port {
 			panel_in: endpoint {
@@ -521,27 +540,27 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 
 	dai@3 {
-		reg = <3>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
 	};
 
 	dai@4 {
-		reg = <4>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA5>;
 	};
 
 	dai@5 {
-		reg = <5>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA6>;
 	};
 };
 
@@ -803,39 +822,78 @@
 		bias-disable;
 	};
 
-	tri_state_key_default: tri-state-key-default-state {
-		pins = "gpio40", "gpio42", "gpio26";
+	panel_vci_default: vci-state {
+		pins = "gpio26";
 		function = "gpio";
-		drive-strength = <2>;
+		drive-strength = <8>;
 		bias-disable;
 	};
 
-	ts_default_pins: ts-int-state {
-		pins = "gpio99", "gpio125";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-pull-up;
-	};
-
-	panel_reset_pins: panel-reset-state {
-		pins = "gpio6", "gpio25", "gpio26";
+	panel_poc_default: poc-state {
+		pins = "gpio25";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
 	};
 
-	panel_te_pin: panel-te-state {
-		pins = "gpio10";
-		function = "mdp_vsync";
+	alert_slider_default: alert-slider-default-state {
+		pins = "gpio126", "gpio52", "gpio24";
+		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	panel_esd_pin: panel-esd-state {
-		pins = "gpio30";
+	panel_default: panel-default-state {
+		esd-pins {
+			pins = "gpio30";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		reset-pins {
+			pins = "gpio6";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		te-pins {
+			pins = "gpio10";
+			function = "mdp_vsync";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	panel_sleep: panel-sleep-state {
+		esd-pins {
+			pins = "gpio30";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		reset-pins {
+			pins = "gpio6";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		te-pins {
+			pins = "gpio10";
+			function = "mdp_vsync";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	ts_default_pins: ts-int-state {
+		pins = "gpio99", "gpio125";
 		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
+		drive-strength = <16>;
+		bias-pull-up;
 	};
 
 	speaker_default: speaker-default-state {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
index 4005e04d998a..a259eb9d45ae 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
@@ -5,13 +5,12 @@
  * Copyright (c) 2020, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/leds/common.h>
 #include "sdm845-oneplus-common.dtsi"
 
 / {
 	model = "OnePlus 6";
 	compatible = "oneplus,enchilada", "qcom,sdm845";
-	chassis-type = "handset";
-	qcom,msm-id = <0x141 0x20001>;
 	qcom,board-id = <8 0 17819 22>;
 
 	battery: battery {
@@ -20,6 +19,14 @@
 		charge-full-design-microamp-hours = <3300000>;
 		voltage-min-design-microvolt = <3400000>;
 		voltage-max-design-microvolt = <4400000>;
+
+		/*
+		 * Typical designs have multiple charger ICs which can handle more
+		 * current but the OnePlus 6/T do not, hence the lower limit. This
+		 * does not apply when using the Dash Charger, however this is not
+		 * yet supported.
+		 */
+		constant-charge-current-max-microamp = <1800000>;
 	};
 };
 
@@ -55,6 +62,33 @@
 	monitored-battery = <&battery>;
 };
 
+&pmi8998_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
 &sound {
 	model = "OnePlus 6";
 	audio-routing = "RX_BIAS", "MCLK",
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
index 9471ada0d6ad..d6cd873aef0d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
@@ -10,8 +10,6 @@
 / {
 	model = "OnePlus 6T";
 	compatible = "oneplus,fajita", "qcom,sdm845";
-	chassis-type = "handset";
-	qcom,msm-id = <0x141 0x20001>;
 	qcom,board-id = <8 0 18801 41>;
 
 	battery: battery {
@@ -20,13 +18,21 @@
 		charge-full-design-microamp-hours = <3700000>;
 		voltage-min-design-microvolt = <3400000>;
 		voltage-max-design-microvolt = <4400000>;
+
+		/*
+		 * Typical designs have multiple charger ICs which can handle more
+		 * current but the OnePlus 6/T do not, hence the lower limit. This
+		 * does not apply when using the Dash Charger, however this is not
+		 * yet supported.
+		 */
+		constant-charge-current-max-microamp = <1800000>;
 	};
 };
 
 &display_panel {
 	status = "okay";
 
-	compatible = "samsung,s6e3fc2x01";
+	compatible = "samsung,s6e3fc2x01-ams641rw", "samsung,s6e3fc2x01";
 };
 
 &i2c4 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index d37a433130b9..5d41a92cfebf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -7,15 +7,38 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd934x.h>
+
 #include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "sdm845-wcd9340.dtsi"
+
+/delete-node/ &rmtfs_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &slpi_mem;
 
 / {
 	chassis-type = "handset";
 	model = "Samsung Galaxy S9 SM-G9600";
 	compatible = "samsung,starqltechn", "qcom,sdm845";
 
+	battery: battery {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <2150000>;
+		charge-full-design-microamp-hours = <3000000>;
+
+		over-voltage-threshold-microvolt = <4500000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -27,9 +50,40 @@
 			height = <2960>;
 			stride = <(1440 * 4)>;
 			format = "a8r8g8b8";
+			vci-supply = <&s2dos05_ldo4>;
+			vddr-supply = <&s2dos05_buck>;
+			vdd3-supply = <&s2dos05_ldo1>;
 		};
 	};
 
+	slpi_regulator: slpi-regulator {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&slpi_ldo_active_state>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "slpi";
+
+		enable-active-high;
+		gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	vib_regulator: gpio-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "haptic";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8998_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-boot-on;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -68,9 +122,178 @@
 			ftrace-size = <0x40000>;
 			pmsg-size = <0x40000>;
 		};
+
+		/*
+		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
+		 * random crashes which are most likely modem related, more testing needed.
+		 */
+		removed_region: removed-region@88f00000 {
+			reg = <0 0x88f00000 0 0x1c00000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@96700000 {
+			reg = <0 0x96700000 0 0x1000000>;
+			no-map;
+		};
+
+		spss_mem: spss@97700000 {
+			reg = <0 0x97700000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: memory@97800000 {
+			reg = <0 0x97800000 0 0x2000000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs-mem@fde00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xfde00000 0 0x202000>;
+			qcom,use-guard-pages;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+	};
+
+	i2c-21 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 127 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 128 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@60 {
+			compatible = "samsung,s2dos05";
+			reg = <0x60>;
+
+			regulators {
+				s2dos05_ldo1: ldo1 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-name = "ldo1";
+				};
+
+				s2dos05_ldo2: ldo2 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-name = "ldo2";
+				};
+
+				s2dos05_ldo3: ldo3 {
+					regulator-active-discharge = <1>;
+					regulator-boot-on;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-name = "ldo3";
+				};
+
+				s2dos05_ldo4: ldo4 {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <3775000>;
+					regulator-name = "ldo4";
+				};
+
+				s2dos05_buck: buck {
+					regulator-active-discharge = <1>;
+					regulator-enable-ramp-delay = <12000>;
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <2100000>;
+					regulator-name = "buck";
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+
+		key-wink {
+			label = "Bixby";
+			gpios = <&pm8998_gpios 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vib_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+		assigned-clock-parents = <&rpmhcc RPMH_CXO_CLK>;
+		assigned-clocks = <&gcc GCC_GP1_CLK_SRC>;
+		clocks = <&gcc GCC_GP1_CLK>;
+		pinctrl-0 = <&motor_pwm_default_state>;
+		pinctrl-1 = <&motor_pwm_suspend_state>;
+		pinctrl-names = "default", "suspend";
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e3ha8";
+		reg = <0>;
+		vci-supply = <&s2dos05_ldo4>;
+		vddr-supply = <&s2dos05_buck>;
+		vdd3-supply = <&s2dos05_ldo1>;
+		te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&dsi_default &dsi_te>;
+		pinctrl-1 = <&dsi_suspend &dsi_te>;
+		pinctrl-names = "default", "suspend";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
 	};
 };
 
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+	status = "okay";
+};
 
 &apps_rsc {
 	regulators-0 {
@@ -135,8 +358,6 @@
 		vdda_sp_sensor:
 		vdda_ufs1_core:
 		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
 		vreg_l1a_0p875: ldo1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;
@@ -157,6 +378,7 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vdda_usb1_ss_core:
 		vdd_wcss_cx:
 		vdd_wcss_mx:
 		vdda_wcss_pll:
@@ -365,10 +587,78 @@
 	status = "okay";
 };
 
+&gpi_dma1 {
+	status = "okay";
+};
+
 &uart9 {
 	status = "okay";
 };
 
+&i2c14 {
+	status = "okay";
+
+	max77705: pmic@66 {
+		compatible = "maxim,max77705";
+		reg = <0x66>;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&pm8998_gpios>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		leds {
+			compatible = "maxim,max77705-rgb";
+
+			multi-led {
+				color = <LED_COLOR_ID_RGB>;
+				function = LED_FUNCTION_STATUS;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_RED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+				};
+
+				led@3 {
+					reg = <3>;
+					color = <LED_COLOR_ID_BLUE>;
+				};
+			};
+		};
+
+		haptic {
+			compatible = "maxim,max77705-haptic";
+			haptic-supply = <&vib_regulator>;
+			pwms = <&vib_pwm 0 52084>;
+		};
+	};
+
+	max77705_charger: charger@69 {
+		reg = <0x69>;
+		compatible = "maxim,max77705-charger";
+		monitored-battery = <&battery>;
+		interrupt-parent = <&max77705>;
+		interrupts = <0>;
+	};
+
+	fuel-gauge@36 {
+		reg = <0x36>;
+		compatible = "maxim,max77705-battery";
+		power-supplies = <&max77705_charger>;
+		maxim,rsns-microohm = <5000>;
+		interrupt-parent = <&max77705>;
+		interrupts = <2>;
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l20a_2p95>;
@@ -383,14 +673,256 @@
 };
 
 &sdhc_2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	pinctrl-names = "default";
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vreg_l21a_2p95>;
 	vqmmc-supply = <&vddpx_2>;
 	status = "okay";
 };
 
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&s2dos05_ldo2>;
+		avdd-supply = <&s2dos05_ldo3>;
+
+		pinctrl-0 = <&touch_irq_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm845/starqltechn/adsp.mbn";
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	model = "Samsung Galaxy S9";
+	pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",	/* Headset Mic */
+			"AMIC3", "MIC BIAS2",	/* FM radio left Tx */
+			"AMIC4", "MIC BIAS2",	/* FM radio right Tx */
+			"DMIC0", "MCLK",	/* Bottom Mic */
+			"DMIC0", "MIC BIAS1",
+			"DMIC2", "MCLK",	/* Top Mic */
+			"DMIC2", "MIC BIAS3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback 1";
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_PB>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture 1";
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slim2-dai-link {
+		link-name = "SLIM Playback 2";
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_PB>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap2-dai-link {
+		link-name = "SLIM Capture 2";
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap3-dai-link {
+		link-name = "SLIM Capture 3";
+
+		codec {
+			sound-dai = <&wcd9340 AIF3_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_2_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
+&q6afedai {
+	dai@22 {
+		reg = <22>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@23 {
+		reg = <23>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+
+	dai@4 {
+		reg = <4>;
+	};
+
+	dai@5 {
+		reg = <5>;
+	};
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <1800000>;
+	qcom,micbias4-microvolt = <1800000>;
+};
+
+&mss_pil {
+	firmware-name = "qcom/sdm845/starqltechn/mba.mbn",
+			"qcom/sdm845/starqltechn/modem.mbn";
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/starqltechn/ipa_fws.mbn";
+	status = "okay";
+};
+
+&slpi_pas {
+	firmware-name = "qcom/sdm845/starqltechn/slpi.mbn";
+	cx-supply = <&slpi_regulator>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -418,16 +950,75 @@
 	status = "okay";
 };
 
-&wifi {
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
 };
 
+&pm8998_gpios {
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio11";
+		function = "normal";
+		input-enable;
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
 &tlmm {
-	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+	gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
+			       <85 4>; /* SPI (fingerprint reader) */
+
+	dsi_default: dsi-default-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	dsi_suspend: dsi-suspend-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	dsi_te: dsi-te-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	i2c21_sda_state: i2c21-sda-state {
+		pins = "gpio127";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c21_scl_state: i2c21-scl-state {
+		pins = "gpio128";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	motor_pwm_default_state: motor-pwm-active-state {
+		pins = "gpio57";
+		function = "gcc_gp1";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	motor_pwm_suspend_state: motor-pwm-suspend-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
 
 	sdc2_clk_state: sdc2-clk-state {
 		pins = "sdc2_clk";
@@ -457,4 +1048,22 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	slpi_ldo_active_state: slpi-ldo-active-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touch_irq_state: touch-irq-state {
+		pins = "gpio120";
+		function = "gpio";
+		bias-disable;
+	};
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-disable;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 486ce175e6bc..ddc2b3ca3bc5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -1,12 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
- * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech>
+ * Copyright (c) 2022, Casey Connolly <casey.connolly@linaro.org>
  * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
  */
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -17,7 +18,8 @@
 / {
 	model = "SHIFT SHIFT6mq";
 	compatible = "shift,axolotl", "qcom,sdm845";
-	qcom,msm-id = <321 0x20001>;
+	chassis-type = "handset";
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
 	qcom,board-id = <11 0>;
 
 	aliases {
@@ -419,40 +421,33 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn";
 };
 
 &i2c5 {
 	status = "okay";
 
 	touchscreen@38 {
-		compatible = "focaltech,fts8719";
+		compatible = "focaltech,ft5452";
 		reg = <0x38>;
-		wakeup-source;
-		interrupt-parent = <&tlmm>;
-		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&vreg_l28a_3p0>;
-		vcc-i2c-supply = <&vreg_l14a_1p88>;
 
-		pinctrl-names = "default", "suspend";
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&vreg_l28a_3p0>;
+		iovcc-supply = <&vreg_l14a_1p88>;
+
 		pinctrl-0 = <&ts_int_active &ts_reset_active>;
 		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
+		pinctrl-names = "default", "suspend";
 
-		reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
-		irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
 		touchscreen-size-x = <1080>;
 		touchscreen-size-y = <2160>;
-		focaltech,max-touch-number = <5>;
 	};
 };
 
@@ -482,9 +477,6 @@
 		vdda-supply = <&vreg_l14a_1p88>;
 		vdd3p3-supply = <&vreg_l28a_3p0>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 
 		pinctrl-names = "default", "sleep";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index b02a1dc5fecd..7dc9349eedfd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
  */
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -12,7 +13,7 @@
 #include "pmi8998.dtsi"
 
 / {
-	qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>; /* SDM845 v2.1 */
 	qcom,board-id = <8 0>;
 
 	aliases {
@@ -415,10 +416,6 @@
 			<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
@@ -429,11 +426,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn";
 };
 
 &i2c5 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 617b17b2d7d9..785006a15e97 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -2,6 +2,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -32,7 +33,7 @@
 
 	/* required for bootloader to select correct board */
 	qcom,board-id = <69 0>;
-	qcom,msm-id = <321 0x20001>;
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
 
 	aliases {
 		serial1 = &uart6;
@@ -239,17 +240,16 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
+&gpi_dma1 {
 	status = "okay";
 };
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn";
 };
 
 &ibb {
@@ -392,15 +392,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -408,6 +408,10 @@
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &sdhc_2 {
 	status = "okay";
 
@@ -513,6 +517,37 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-down;
+		output-disable;
+	};
+
+	ts_reset_default: ts-reset-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		output-high;
+	};
+
+	ts_int_sleep: ts-int-sleep-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+		output-disable;
+	};
+
+	ts_reset_sleep: ts-reset-sleep-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &uart6 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
index 76931ebad065..2d6f0e382a6c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
@@ -13,3 +13,26 @@
 	compatible = "ebbg,ft8719";
 	status = "okay";
 };
+
+&i2c14 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "focaltech,ft8719";
+		reg = <0x38>;
+
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		panel = <&display_panel>;
+
+		iovcc-supply = <&vreg_l14a_1p8>;
+		vcc-supply = <&lab>;
+
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2246>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
index e9427851ebaa..b58964cde834 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
@@ -13,3 +13,26 @@
 	compatible = "tianma,fhd-video", "novatek,nt36672a";
 	status = "okay";
 };
+
+&i2c14 {
+	status = "okay";
+
+	touchscreen@1 {
+		compatible = "novatek,nt36672a-ts";
+		reg = <0x01>;
+
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		panel = <&display_panel>;
+
+		iovcc-supply = <&vreg_l14a_1p8>;
+		vcc-supply = <&lab>;
+
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2246>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index e386b504e978..30e88ff010a3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -38,7 +39,7 @@
 	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
-	qcom,msm-id = <0x141 0x20001>;
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
 	qcom,board-id = <0x2a 0x0>;
 
 	aliases {
@@ -381,10 +382,6 @@
 				<GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpi_dma0 {
 	status = "okay";
 };
@@ -395,11 +392,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm845/polaris/a630_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm845/polaris/a630_zap.mbn";
 };
 
 &ibb {
@@ -547,15 +543,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 1ed794638a7c..bf2f9c04adba 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
 #include <dt-bindings/clock/qcom,lpass-sdm845.h>
@@ -2217,6 +2218,11 @@
 			};
 		};
 
+		refgen: regulator@ff1000 {
+			compatible = "qcom,sdm845-refgen-regulator";
+			reg = <0x0 0x00ff1000 0x0 0x60>;
+		};
+
 		llcc: system-cache-controller@1100000 {
 			compatible = "qcom,sdm845-llcc";
 			reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>,
@@ -2326,14 +2332,30 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2435,14 +2457,30 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
@@ -4056,7 +4094,7 @@
 					reg = <2>;
 
 					usb_1_qmpphy_dp_in: endpoint {
-						remote-endpoint = <&dp_out>;
+						remote-endpoint = <&mdss_dp_out>;
 					};
 				};
 			};
@@ -4139,6 +4177,8 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,parkmode-disable-ss-quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
@@ -4215,6 +4255,8 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,parkmode-disable-ss-quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -4249,14 +4291,6 @@
 
 			status = "disabled";
 
-			video-core0 {
-				compatible = "venus-decoder";
-			};
-
-			video-core1 {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4326,16 +4360,16 @@
 				"vfe1",
 				"vfe_lite";
 
-			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csid0",
 				"csid1",
 				"csid2",
@@ -4541,7 +4575,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sdm845-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_AXI_CLK>,
@@ -4566,7 +4600,7 @@
 					port@0 {
 						reg = <0>;
 						dpu_intf0_out: endpoint {
-							remote-endpoint = <&dp_in>;
+							remote-endpoint = <&mdss_dp_in>;
 						};
 					};
 
@@ -4627,12 +4661,19 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
-				clock-names = "core_iface", "core_aux", "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
@@ -4645,14 +4686,14 @@
 					#size-cells = <0>;
 					port@0 {
 						reg = <0>;
-						dp_in: endpoint {
+						mdss_dp_in: endpoint {
 							remote-endpoint = <&dpu_intf0_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dp_out: endpoint {
+						mdss_dp_out: endpoint {
 							remote-endpoint = <&usb_1_qmpphy_dp_in>;
 						};
 					};
@@ -4704,14 +4745,18 @@
 					      "core",
 					      "iface",
 					      "bus";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&mdss_dsi0_phy>;
 
+				refgen-supply = <&refgen>;
+
 				status = "disabled";
 
 				#address-cells = <1>;
@@ -4776,14 +4821,18 @@
 					      "core",
 					      "iface",
 					      "bus";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&mdss_dsi1_phy>;
 
+				refgen-supply = <&refgen>;
+
 				status = "disabled";
 
 				#address-cells = <1>;
@@ -4853,6 +4902,10 @@
 
 			status = "disabled";
 
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4948,8 +5001,6 @@
 
 			operating-points-v2 = <&gmu_opp_table>;
 
-			status = "disabled";
-
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4971,10 +5022,10 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -5074,18 +5125,18 @@
 			#interrupt-cells = <4>;
 		};
 
-		sram@146bf000 {
+		sram@14680000 {
 			compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
-			reg = <0 0x146bf000 0 0x1000>;
+			reg = <0 0x14680000 0 0x40000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ranges = <0 0 0x146bf000 0x1000>;
+			ranges = <0 0 0x14680000 0x40000>;
 
-			pil-reloc@94c {
+			pil-reloc@3f94c {
 				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0xc8>;
+				reg = <0x3f94c 0xc8>;
 			};
 		};
 
@@ -5159,7 +5210,6 @@
 				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
 		};
 
 		anoc_1_tbu: tbu@150c5000 {
@@ -5263,8 +5313,8 @@
 		};
 
 		apps_rsc: rsc@179c0000 {
+			compatible = "qcom,sdm845-rpmh-apps-rsc", "qcom,rpmh-rsc";
 			label = "apps_rsc";
-			compatible = "qcom,rpmh-rsc";
 			reg = <0 0x179c0000 0 0x10000>,
 			      <0 0x179d0000 0 0x10000>,
 			      <0 0x179e0000 0 0x10000>;
@@ -5366,11 +5416,11 @@
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			qcom,controlled-remotely;
 			reg = <0 0x17184000 0 0x2a000>;
-			num-channels = <31>;
+			num-channels = <23>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
-			qcom,num-ees = <2>;
+			qcom,num-ees = <4>;
 			iommus = <&apps_smmu 0x1806 0x0>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts
new file mode 100644
index 000000000000..0ef9ea38a424
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts
@@ -0,0 +1,971 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Huawei MateBook E 2019
+ *
+ * Copyright (c) 2025, Jingzhou Zhu <newwheatzjz@zohomail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd934x.h>
+#include "sdm850.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+
+/*
+ * Update following upstream (sdm845.dtsi) reserved
+ * memory mappings for firmware loading to succeed
+ * and enable the IPA device.
+ */
+/delete-node/ &tz_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &qseecom_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &slpi_mem;
+
+/ {
+	model = "Huawei MateBook E 2019";
+	compatible = "huawei,planck", "qcom,sdm845";
+	chassis-type = "convertible";
+
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_gpio &mode_pin_active>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "Volume up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+
+		switch-mode {
+			label = "Tablet mode switch";
+			gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&cam_indicator_en>;
+		pinctrl-names = "default";
+
+		led: led-camera-indicator {
+			label = "white:camera-indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			/* Reuse as a panic indicator until we get a "camera on" trigger */
+			panic-indicator;
+		};
+	};
+
+	sw_edp_1p2: regulator-edp-1p2 {
+		compatible = "regulator-fixed";
+		regulator-name = "sw_edp_1p2";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		pinctrl-0 = <&sw_edp_1p2_en>;
+		pinctrl-names = "default";
+
+		gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_l2a_1p2>;
+	};
+
+	vlcm_3v3: regulator-vlcm-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vlcm_3v3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		cont_splash_mem: framebuffer@80100000 {
+			reg = <0 0x80100000 0 0xd00000>;
+			no-map;
+		};
+
+		tz_mem: tz@86d00000 {
+			reg = <0 0x86d00000 0 0x4600000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom@8b500000 {
+			reg = <0 0x8b500000 0 0xa00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@8c400000 {
+			reg = <0 0x8c400000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8c500000 {
+			reg = <0 0x8c500000 0 0x1a00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8df00000 {
+			reg = <0 0x8df00000 0 0x100000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@96700000 {
+			reg = <0 0x96700000 0 0x1200000>;
+		};
+
+		gpu_mem: gpu@97900000 {
+			reg = <0 0x97900000 0 0x5000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@97c00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0x97c00000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+
+		};
+	};
+
+	sn65dsi86_refclk: sn65dsi86-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+
+		clock-frequency = <19200000>;
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm850/HUAWEI/AL09/qcadsp850.mbn";
+
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p8: smps6 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <1028000>;
+			regulator-max-microvolt = <1028000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+		};
+
+		vreg_l9a_1p8: ldo9 {
+		};
+
+		vreg_l10a_1p8: ldo10 {
+		};
+
+		vreg_l11a_1p0: ldo11 {
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+		};
+
+		vreg_l16a_2p7: ldo16 {
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+			regulator-always-on;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			/* 3075000 uV causes -ENOTRECOVERABLE error */
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			/* 3300000 uV causes -ENOTRECOVERABLE error */
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+		};
+	};
+};
+
+&cci_i2c0 {
+	/* chipnext,cn3927e vcm@0xc */
+	/* samsung,s5k3l6 camera@0x10 */
+	/* eeprom@0x50 */
+};
+
+&cci_i2c1 {
+	/* galaxycore,gc5025 camera@0x36 */
+	/* eeprom@0x50 */
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm850/HUAWEI/AL09/qccdsp850.mbn";
+
+	status = "okay";
+};
+
+&crypto {
+	/* FIXME: qce_start triggers an SError */
+	status = "disabled";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdxkmsuc850.mbn";
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen: hid@5d {
+		compatible = "hid-over-i2c";
+		reg = <0x5d>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&i2c5_hid_active>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	/* ec@0x76 */
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	sn65dsi86: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		pinctrl-0 = <&sn65dsi86_pin_active>;
+		pinctrl-names = "default";
+
+		enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+		vcca-supply = <&sw_edp_1p2>;
+		vcc-supply = <&sw_edp_1p2>;
+		vpll-supply = <&vreg_l14a_1p88>;
+		vccio-supply = <&vreg_l14a_1p88>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		no-hpd;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "innolux,p120zdg-bf1";
+				power-supply = <&vlcm_3v3>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&sn65dsi86_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm850/HUAWEI/AL09/ipa_fws.elf";
+
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&sn65dsi86_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+
+	status = "okay";
+};
+
+&mss_pil {
+	firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdsp1v2850.mbn",
+			"qcom/sdm850/HUAWEI/AL09/qcdsp2850.mbn";
+
+	status = "okay";
+};
+
+&pm8998_gpios {
+	sw_edp_1p2_en: sw-edp-1p2-en-state {
+		pins = "gpio9";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	volume_up_gpio: volume-up-gpio-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&pm8998_pwrkey {
+	status = "okay";
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+	};
+
+	dai@1 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+	};
+
+	dai@2 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+	};
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vddpx_2>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&slpi_pas {
+	firmware-name = "qcom/sdm850/HUAWEI/AL09/qcslpi850.mbn";
+
+	status = "okay";
+};
+
+&sound {
+	compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
+	model = "HUAWEI-PAK_AL09-M1040";
+
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",
+			"DMIC0", "MCLK",
+			"DMIC0", "MIC BIAS1",
+			"DMIC2", "MCLK",
+			"DMIC2", "MIC BIAS3",
+			"SpkrLeft IN", "SPK1 OUT",
+			"SpkrRight IN", "SPK2 OUT";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 AIF1_PB>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+
+		codec {
+			sound-dai = <&wcd9340 AIF1_CAP>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slim-wcd-dai-link {
+		link-name = "SLIM WCD Playback";
+
+		codec {
+			sound-dai = <&wcd9340 AIF2_PB>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, /* Unused */
+			       <81 4>; /* SPI (fingerprint reader) */
+
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c5_hid_active: i2c5-hid-active-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	mode_pin_active: mode-pin-state {
+		pins = "gpio79";
+		function = "gpio";
+		bias-disable;
+	};
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	sn65dsi86_pin_active: sn65dsi86-enable-state {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart6 {
+	pinctrl-0 = <&qup_uart6_4pin>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		vddch1-supply = <&vreg_l23a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vdda_usb2_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy {
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sdm850/HUAWEI/AL09/qcvss850.mbn";
+
+	status = "okay";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
+						  500000 500000 500000 500000>;
+	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <1800000>;
+
+	swm: soundwire@c85 {
+		left_spkr: speaker@0,3 {
+			compatible = "sdw10217211000";
+			reg = <0 3>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: speaker@0,4 {
+			compatible = "sdw10217211000";
+			reg = <0 4>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+	qcom,calibration-variant = "Huawei_Planck";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index f18050848cd8..e41200839dbe 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -355,16 +355,11 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
-&gmu {
-	status = "okay";
-};
-
 &gpu {
-	status = "okay";
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn";
-	};
+	status = "okay";};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn";
 };
 
 &i2c1 {
@@ -425,9 +420,46 @@
 			data-role = "host";
 
 			/*
-			 * connected to the onboard USB hub, orientation is
-			 * handled by the controller
+			 * connected to the onboard USB hub, each pair of lanes
+			 * (and D+/D- pair) is connected to a separate port on
+			 * the hub.
 			 */
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ucsi1_hs_in_1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&usb_hub_2_1>;
+					};
+
+					ucsi1_hs_in_2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&usb_hub_2_2>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ucsi1_ss_in_1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&usb_hub_3_1>;
+					};
+
+					ucsi1_ss_in_2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&usb_hub_3_2>;
+					};
+				};
+			};
 		};
 	};
 };
@@ -565,15 +597,11 @@
 &mdss_dsi0 {
 	status = "okay";
 	vdda-supply = <&vreg_l26a_1p2>;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&sn65dsi86_in_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&sn65dsi86_in_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
@@ -616,18 +644,24 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
+&slpi_pas {
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qcslpi850.mbn";
+
+	status = "okay";
+};
+
 &sound {
 	compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
 	model = "Lenovo-YOGA-C630-13Q50";
@@ -636,10 +670,7 @@
 		"RX_BIAS", "MCLK",
 		"AMIC2", "MIC BIAS2",
 		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL3",  "MultiMedia3 Playback",
-		"MultiMedia2 Capture", "MM_UL2";
+		"SpkrRight IN", "SPK2 OUT";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
@@ -843,6 +874,69 @@
 
 &usb_2_dwc3 {
 	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb_hub_2_x: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+		peer-hub = <&usb_hub_3_x>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		camera@3 {
+			compatible = "usb4f2,b61e";
+			reg = <3>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				usb_hub_2_1: endpoint {
+					remote-endpoint = <&ucsi1_hs_in_1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				usb_hub_2_2: endpoint {
+					remote-endpoint = <&ucsi1_hs_in_2>;
+				};
+			};
+		};
+	};
+
+	usb_hub_3_x: hub@2 {
+		compatible = "usb5e3,620";
+		reg = <2>;
+		peer-hub = <&usb_hub_2_x>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				usb_hub_3_1: endpoint {
+					remote-endpoint = <&ucsi1_ss_in_1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				usb_hub_3_2: endpoint {
+					remote-endpoint = <&ucsi1_ss_in_2>;
+				};
+			};
+		};
+	};
 };
 
 &usb_2_hsphy {
@@ -910,7 +1004,7 @@
 	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
-	qcom,ath10k-calibration-variant = "Lenovo_C630";
+	qcom,calibration-variant = "Lenovo_C630";
 };
 
 &crypto {
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index 26217836c270..a676d3ea01b9 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -425,15 +425,15 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 
 	dai@1 {
-		reg = <1>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
 	};
 
 	dai@2 {
-		reg = <2>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
 	};
 };
 
@@ -445,10 +445,7 @@
 		"RX_BIAS", "MCLK",
 		"AMIC2", "MIC BIAS2",
 		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL3",  "MultiMedia3 Playback",
-		"MultiMedia2 Capture", "MM_UL2";
+		"SpkrRight IN", "SPK2 OUT";
 
 	mm1-dai-link {
 		link-name = "MultiMedia1";
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index f1bbe7ab01ab..6696e1aee243 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -278,6 +278,24 @@
 	vdd3-supply = <&vreg_l10b_3p08>;
 };
 
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* efs2 partition is secured */
+		secure-regions = /bits/ 64 <0x680000 0xb00000>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -319,11 +337,9 @@
 };
 
 &usb {
-	status = "okay";
-};
-
-&usb_dwc3 {
 	dr_mode = "peripheral";
+
+	status = "okay";
 };
 
 &usb_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index 5f7e59ecf1ca..eff4c9055d66 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -34,7 +34,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -880,6 +880,39 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		qpic_bam: dma-controller@1c9c000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x01c9c000 0x0 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x100 0x3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@1cc8000 {
+			compatible = "qcom,sdx75-nand", "qcom,sdx55-nand";
+			reg = <0x0 0x01cc8000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&sleep_clk>;
+			clock-names = "core",
+				      "aon";
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx",
+				    "rx",
+				    "cmd";
+			iommus = <&apps_smmu 0x100 0x3>;
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -893,7 +926,7 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sdx75-mpss-pas";
-			reg = <0 0x04080000 0 0x4040>;
+			reg = <0 0x04080000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -986,12 +1019,9 @@
 			};
 		};
 
-		usb: usb@a6f8800 {
-			compatible = "qcom,sdx75-dwc3", "qcom,dwc3";
-			reg = <0x0 0x0a6f8800 0x0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb: usb@a600000 {
+			compatible = "qcom,sdx75-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
 
 			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
@@ -1008,19 +1038,35 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
 					      <&pdc 9 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 10 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
+
+			iommus = <&apps_smmu 0x80 0x0>;
+
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
 
 			power-domains = <&gcc GCC_USB30_GDSC>;
 
 			resets = <&gcc GCC_USB30_BCR>;
 
+			phys = <&usb_hsphy>,
+			       <&usb_qmpphy>;
+			phy-names = "usb2-phy",
+				    "usb3-phy";
+
 			interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1028,36 +1074,25 @@
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
+			usb-role-switch;
+
 			status = "disabled";
 
-			usb_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x0a600000 0x0 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x80 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>,
-				       <&usb_qmpphy>;
-				phy-names = "usb2-phy",
-					    "usb3-phy";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						usb_1_dwc3_hs: endpoint {
-						};
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_dwc3_hs: endpoint {
 					};
+				};
 
-					port@1 {
-						reg = <1>;
+				port@1 {
+					reg = <1>;
 
-						usb_1_dwc3_ss: endpoint {
-						};
+					usb_1_dwc3_ss: endpoint {
 					};
 				};
 			};
@@ -1075,7 +1110,7 @@
 			interrupt-controller;
 		};
 
-		aoss_qmp: power-controller@c310000 {
+		aoss_qmp: power-management@c310000 {
 			compatible = "qcom,sdx75-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c310000 0 0x1000>;
 			interrupt-parent = <&ipcc>;
diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi
index a0ed61925e12..cd8c8e59976e 100644
--- a/arch/arm64/boot/dts/qcom/sm4250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi
@@ -36,3 +36,42 @@
 &cpu7 {
 	compatible = "qcom,kryo240";
 };
+
+&lpass_tlmm {
+	compatible = "qcom,sm4250-lpass-lpi-pinctrl";
+	gpio-ranges = <&lpass_tlmm 0 0 27>;
+
+	lpi_i2s2_active: lpi-i2s2-active-state {
+		sck-pins {
+			pins = "gpio10";
+			function = "i2s2_clk";
+			bias-disable;
+			drive-strength = <8>;
+			output-high;
+		};
+
+		ws-pins {
+			pins = "gpio11";
+			function = "i2s2_ws";
+			bias-disable;
+			drive-strength = <8>;
+			output-high;
+		};
+
+		data-pins {
+			pins = "gpio12";
+			function = "i2s2_data";
+			bias-disable;
+			drive-strength = <8>;
+			output-high;
+		};
+
+		ext-mclk1-pins {
+			pins = "gpio18";
+			function = "ext_mclk1_a";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
index a0de5fe16faa..d217d922811e 100644
--- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/clock/qcom,sm4450-gpucc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -29,7 +31,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 
@@ -591,6 +593,72 @@
 				clocks = <&xo_board>;
 				clock-names = "xo";
 			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm4450-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_low_svs_l2: opp-96 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L2>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp-224 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
 		};
 
 		cpufreq_hw: cpufreq@17d91000 {
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index f60d36c03b9b..466ad409e924 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -121,10 +121,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn";
 };
 
 &i2c1 {
@@ -566,7 +566,7 @@
 	vdd-1.3-rfa-supply = <&pm6125_l17a>;
 	vdd-3.3-ch0-supply = <&pm6125_l23a>;
 
-	qcom,ath10k-calibration-variant = "Fxtec_QX1050";
+	qcom,calibration-variant = "Fxtec_QX1050";
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 9b23534c456b..5e2032c26ea3 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm6115.h>
 #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
 #include <dt-bindings/clock/qcom,sm6115-gpucc.h>
@@ -14,6 +15,9 @@
 #include <dt-bindings/interconnect/qcom,sm6115.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -717,6 +721,13 @@
 				bias-pull-up;
 			};
 
+			qup_uart4_default: qup-uart4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			sdc1_state_on: sdc1-on-state {
 				clk-pins {
 					pins = "sdc1_clk";
@@ -808,6 +819,20 @@
 			};
 		};
 
+		lpass_tlmm: pinctrl@a7c0000 {
+			compatible = "qcom,sm6115-lpass-lpi-pinctrl";
+			reg = <0x0 0x0a7c0000 0x0 0x20000>,
+			      <0x0 0x0a950000 0x0 0x10000>;
+
+			clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 19>;
+
+		};
+
 		gcc: clock-controller@1400000 {
 			compatible = "qcom,gcc-sm6115";
 			reg = <0x0 0x01400000 0x0 0x1f0000>;
@@ -1547,6 +1572,8 @@
 				reg = <0x0 0x04a90000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart4_default>;
 				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
 						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
@@ -1718,7 +1745,7 @@
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&pil_gpu_mem>;
 			};
 
@@ -1856,7 +1883,7 @@
 			mdp: display-controller@5e01000 {
 				compatible = "qcom,sm6115-dpu";
 				reg = <0x0 0x05e01000 0x0 0x8f000>,
-				      <0x0 0x05eb0000 0x0 0x2008>;
+				      <0x0 0x05eb0000 0x0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -1943,7 +1970,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd SM6115_VDDCX>;
@@ -2017,8 +2045,8 @@
 			reg = <0x0 0x05f00000 0 0x20000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -2027,7 +2055,7 @@
 
 		remoteproc_mpss: remoteproc@6080000 {
 			compatible = "qcom,sm6115-mpss-pas";
-			reg = <0x0 0x06080000 0x0 0x100>;
+			reg = <0x0 0x06080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2670,9 +2698,9 @@
 			};
 		};
 
-		remoteproc_adsp: remoteproc@ab00000 {
+		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6115-adsp-pas";
-			reg = <0x0 0x0ab00000 0x0 0x100>;
+			reg = <0x0 0x0a400000 0x0 0x4040>;
 
 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2701,6 +2729,76 @@
 				qcom,remote-pid = <2>;
 				mboxes = <&apcs_glb 8>;
 
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1c1 0x0>;
+
+							dai@0 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+							};
+
+							dai@1 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+							};
+
+							dai@2 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
@@ -2744,7 +2842,7 @@
 
 		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6115-cdsp-pas";
-			reg = <0x0 0x0b300000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x4040>;
 
 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
index 9d78bb3f7190..be1f550fd7b5 100644
--- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -67,10 +67,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/sm6115/LENOVO/J606F/a610_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm6115/LENOVO/J606F/a610_zap.mbn";
 };
 
 &mdss {
@@ -379,7 +379,7 @@
 	vdd-1.8-xo-supply = <&pm6125_l16>;
 	vdd-1.3-rfa-supply = <&pm6125_l17>;
 	vdd-3.3-ch0-supply = <&pm6125_l23>;
-	qcom,ath10k-calibration-variant = "Lenovo_P11";
+	qcom,calibration-variant = "Lenovo_P11";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts
new file mode 100644
index 000000000000..68a237215bd1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Gabriel Gonzales <semfault@disroot.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "sm6125.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 8";
+	compatible = "xiaomi,ginkgo", "qcom,sm6125";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM6125>;
+	qcom,board-id = <22 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (2340 * 1080 * 4)>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	reserved-memory {
+		debug_mem: debug@ffb00000 {
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: lastlog@ffbc0000 {
+			reg = <0x0 0xffbc0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc40000 0x0 0xc0000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+		};
+
+		cmdline_mem: memory@ffd00000 {
+			reg = <0x0 0xffd40000 0x0 0x1000>;
+			no-map;
+		};
+	};
+
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm6125_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+};
+
+&pm6125_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l10a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <1422000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+		};
+
+		vreg_l2a: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1056000>;
+		};
+
+		vreg_l3a: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1064000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1996000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1264000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2856000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&vreg_l24a>;
+	vqmmc-supply = <&vreg_l11a>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <22 2>, <28 6>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 17d528d63934..8f2d65543373 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sm6125.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm6125.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -28,7 +29,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			clock-output-names = "sleep_clk";
 		};
 	};
@@ -1209,6 +1210,8 @@
 				phy-names = "usb2-phy";
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				maximum-speed = "high-speed";
 				dr_mode = "peripheral";
 			};
@@ -1248,7 +1251,7 @@
 			mdss_mdp: display-controller@5e01000 {
 				compatible = "qcom,sm6125-dpu";
 				reg = <0x05e01000 0x83208>,
-				      <0x05eb0000 0x2008>;
+				      <0x05eb0000 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				interrupt-parent = <&mdss>;
@@ -1338,7 +1341,8 @@
 					      "bus";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd SM6125_VDDCX>;
@@ -1413,8 +1417,8 @@
 			reg = <0x05f00000 0x20000>;
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>,
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index bf23033a294e..8848043f95f2 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -381,9 +381,16 @@
 };
 
 &usb_1_hsphy {
+	vdd-supply = <&pm6350_l18>;
+	vdda-phy-dpdm-supply = <&pm6350_l3>;
+	vdda-pll-supply = <&pm6350_l2>;
+
 	status = "okay";
 };
 
 &usb_1_qmpphy {
+	vdda-phy-supply = <&pm6350_l16>;
+	vdda-pll-supply = <&pm6350_l22>;
+
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 8d697280249f..f34dc6e278b8 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm6350.h>
 #include <dt-bindings/clock/qcom,gpucc-sm6350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -18,7 +19,9 @@
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -566,114 +569,114 @@
 		ranges;
 
 		hyp_mem: memory@80000000 {
-			reg = <0 0x80000000 0 0x600000>;
+			reg = <0x0 0x80000000 0x0 0x600000>;
 			no-map;
 		};
 
 		xbl_aop_mem: memory@80700000 {
-			reg = <0 0x80700000 0 0x160000>;
+			reg = <0x0 0x80700000 0x0 0x160000>;
 			no-map;
 		};
 
 		cmd_db: memory@80860000 {
 			compatible = "qcom,cmd-db";
-			reg = <0 0x80860000 0 0x20000>;
+			reg = <0x0 0x80860000 0x0 0x20000>;
 			no-map;
 		};
 
 		sec_apps_mem: memory@808ff000 {
-			reg = <0 0x808ff000 0 0x1000>;
+			reg = <0x0 0x808ff000 0x0 0x1000>;
 			no-map;
 		};
 
 		smem_mem: memory@80900000 {
-			reg = <0 0x80900000 0 0x200000>;
+			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
 
 		cdsp_sec_mem: memory@80b00000 {
-			reg = <0 0x80b00000 0 0x1e00000>;
+			reg = <0x0 0x80b00000 0x0 0x1e00000>;
 			no-map;
 		};
 
 		pil_camera_mem: memory@86000000 {
-			reg = <0 0x86000000 0 0x500000>;
+			reg = <0x0 0x86000000 0x0 0x500000>;
 			no-map;
 		};
 
 		pil_npu_mem: memory@86500000 {
-			reg = <0 0x86500000 0 0x500000>;
+			reg = <0x0 0x86500000 0x0 0x500000>;
 			no-map;
 		};
 
 		pil_video_mem: memory@86a00000 {
-			reg = <0 0x86a00000 0 0x500000>;
+			reg = <0x0 0x86a00000 0x0 0x500000>;
 			no-map;
 		};
 
 		pil_cdsp_mem: memory@86f00000 {
-			reg = <0 0x86f00000 0 0x1e00000>;
+			reg = <0x0 0x86f00000 0x0 0x1e00000>;
 			no-map;
 		};
 
 		pil_adsp_mem: memory@88d00000 {
-			reg = <0 0x88d00000 0 0x2800000>;
+			reg = <0x0 0x88d00000 0x0 0x2800000>;
 			no-map;
 		};
 
 		wlan_fw_mem: memory@8b500000 {
-			reg = <0 0x8b500000 0 0x200000>;
+			reg = <0x0 0x8b500000 0x0 0x200000>;
 			no-map;
 		};
 
 		pil_ipa_fw_mem: memory@8b700000 {
-			reg = <0 0x8b700000 0 0x10000>;
+			reg = <0x0 0x8b700000 0x0 0x10000>;
 			no-map;
 		};
 
 		pil_ipa_gsi_mem: memory@8b710000 {
-			reg = <0 0x8b710000 0 0x5400>;
+			reg = <0x0 0x8b710000 0x0 0x5400>;
 			no-map;
 		};
 
 		pil_modem_mem: memory@8b800000 {
-			reg = <0 0x8b800000 0 0xf800000>;
+			reg = <0x0 0x8b800000 0x0 0xf800000>;
 			no-map;
 		};
 
 		cont_splash_memory: memory@a0000000 {
-			reg = <0 0xa0000000 0 0x2300000>;
+			reg = <0x0 0xa0000000 0x0 0x2300000>;
 			no-map;
 		};
 
 		dfps_data_memory: memory@a2300000 {
-			reg = <0 0xa2300000 0 0x100000>;
+			reg = <0x0 0xa2300000 0x0 0x100000>;
 			no-map;
 		};
 
 		removed_region: memory@c0000000 {
-			reg = <0 0xc0000000 0 0x3900000>;
+			reg = <0x0 0xc0000000 0x0 0x3900000>;
 			no-map;
 		};
 
 		pil_gpu_mem: memory@f0d00000 {
-			reg = <0 0xf0d00000 0 0x1000>;
+			reg = <0x0 0xf0d00000 0x0 0x1000>;
 			no-map;
 		};
 
 		debug_region: memory@ffb00000 {
-			reg = <0 0xffb00000 0 0xc0000>;
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
 			no-map;
 		};
 
 		last_log_region: memory@ffbc0000 {
-			reg = <0 0xffbc0000 0 0x40000>;
+			reg = <0x0 0xffbc0000 0x0 0x40000>;
 			no-map;
 		};
 
 		ramoops: ramoops@ffc00000 {
 			compatible = "ramoops";
-			reg = <0 0xffc00000 0 0x100000>;
+			reg = <0x0 0xffc00000 0x0 0x100000>;
 			record-size = <0x1000>;
 			console-size = <0x40000>;
 			pmsg-size = <0x20000>;
@@ -682,7 +685,7 @@
 		};
 
 		cmdline_region: memory@ffd00000 {
-			reg = <0 0xffd00000 0 0x1000>;
+			reg = <0x0 0xffd00000 0x0 0x1000>;
 			no-map;
 		};
 	};
@@ -786,7 +789,7 @@
 
 		gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sm6350";
-			reg = <0 0x00100000 0 0x1f0000>;
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -800,7 +803,7 @@
 
 		ipcc: mailbox@408000 {
 			compatible = "qcom,sm6350-ipcc", "qcom,ipcc";
-			reg = <0 0x00408000 0 0x1000>;
+			reg = <0x0 0x00408000 0x0 0x1000>;
 			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -809,7 +812,7 @@
 
 		qfprom: qfprom@784000 {
 			compatible = "qcom,sm6350-qfprom", "qcom,qfprom";
-			reg = <0 0x00784000 0 0x3000>;
+			reg = <0x0 0x00784000 0x0 0x3000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
@@ -821,16 +824,16 @@
 
 		rng: rng@793000 {
 			compatible = "qcom,prng-ee";
-			reg = <0 0x00793000 0 0x1000>;
+			reg = <0x0 0x00793000 0x0 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
 
 		sdhc_1: mmc@7c4000 {
 			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0 0x007c4000 0 0x1000>,
-				<0 0x007c5000 0 0x1000>,
-				<0 0x007c8000 0 0x8000>;
+			reg = <0x0 0x007c4000 0x0 0x1000>,
+			      <0x0 0x007c5000 0x0 0x1000>,
+			      <0x0 0x007c8000 0x0 0x8000>;
 			reg-names = "hc", "cqhci", "ice";
 
 			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
@@ -875,7 +878,7 @@
 
 		gpi_dma0: dma-controller@800000 {
 			compatible = "qcom,sm6350-gpi-dma";
-			reg = <0 0x00800000 0 0x60000>;
+			reg = <0x0 0x00800000 0x0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -907,7 +910,7 @@
 
 			i2c0: i2c@880000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00880000 0 0x4000>;
+				reg = <0x0 0x00880000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				pinctrl-names = "default";
@@ -927,7 +930,7 @@
 
 			uart1: serial@884000 {
 				compatible = "qcom,geni-uart";
-				reg = <0 0x00884000 0 0x4000>;
+				reg = <0x0 0x00884000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				pinctrl-names = "default";
@@ -936,14 +939,14 @@
 				power-domains = <&rpmhpd SM6350_CX>;
 				operating-points-v2 = <&qup_opp_table>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
 			i2c2: i2c@888000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00888000 0 0x4000>;
+				reg = <0x0 0x00888000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				pinctrl-names = "default";
@@ -964,7 +967,7 @@
 
 		gpi_dma1: dma-controller@900000 {
 			compatible = "qcom,sm6350-gpi-dma";
-			reg = <0 0x00900000 0 0x60000>;
+			reg = <0x0 0x00900000 0x0 0x60000>;
 			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 646 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>,
@@ -996,7 +999,7 @@
 
 			i2c6: i2c@980000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00980000 0 0x4000>;
+				reg = <0x0 0x00980000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				pinctrl-names = "default";
@@ -1016,7 +1019,7 @@
 
 			i2c7: i2c@984000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00984000 0 0x4000>;
+				reg = <0x0 0x00984000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				pinctrl-names = "default";
@@ -1036,7 +1039,7 @@
 
 			i2c8: i2c@988000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00988000 0 0x4000>;
+				reg = <0x0 0x00988000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				pinctrl-names = "default";
@@ -1056,7 +1059,7 @@
 
 			uart9: serial@98c000 {
 				compatible = "qcom,geni-debug-uart";
-				reg = <0 0x0098c000 0 0x4000>;
+				reg = <0x0 0x0098c000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				pinctrl-names = "default";
@@ -1070,7 +1073,7 @@
 
 			i2c10: i2c@990000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x00990000 0 0x4000>;
+				reg = <0x0 0x00990000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				pinctrl-names = "default";
@@ -1091,14 +1094,14 @@
 
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sm6350-config-noc";
-			reg = <0 0x01500000 0 0x28000>;
+			reg = <0x0 0x01500000 0x0 0x28000>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system_noc: interconnect@1620000 {
 			compatible = "qcom,sm6350-system-noc";
-			reg = <0 0x01620000 0 0x17080>;
+			reg = <0x0 0x01620000 0x0 0x17080>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 
@@ -1111,14 +1114,14 @@
 
 		aggre1_noc: interconnect@16e0000 {
 			compatible = "qcom,sm6350-aggre1-noc";
-			reg = <0 0x016e0000 0 0x15080>;
+			reg = <0x0 0x016e0000 0x0 0x15080>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre2_noc: interconnect@1700000 {
 			compatible = "qcom,sm6350-aggre2-noc";
-			reg = <0 0x01700000 0 0x1f880>;
+			reg = <0x0 0x01700000 0x0 0x1f880>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 
@@ -1131,7 +1134,7 @@
 
 		mmss_noc: interconnect@1740000 {
 			compatible = "qcom,sm6350-mmss-noc";
-			reg = <0 0x01740000 0 0x1c100>;
+			reg = <0x0 0x01740000 0x0 0x1c100>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
@@ -1139,8 +1142,8 @@
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x3000>,
-			      <0 0x01d90000 0 0x8000>;
+			reg = <0x0 0x01d84000 0x0 0x3000>,
+			      <0x0 0x01d90000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&ufs_mem_phy>;
@@ -1172,23 +1175,52 @@
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
 				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
+
+			operating-points-v2 = <&ufs_opp_table>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm6350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1000>;
+			reg = <0x0 0x01d87000 0x0 0x1000>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -1209,7 +1241,7 @@
 
 		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
-			reg = <0 0x01dc4000 0 0x24000>;
+			reg = <0x0 0x01dc4000 0x0 0x24000>;
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
@@ -1225,7 +1257,7 @@
 
 		crypto: crypto@1dfa000 {
 			compatible = "qcom,sm6350-qce", "qcom,sm8150-qce", "qcom,qce";
-			reg = <0 0x01dfa000 0 0x6000>;
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
 			dmas = <&cryptobam 4>, <&cryptobam 5>;
 			dma-names = "rx", "tx";
 			iommus = <&apps_smmu 0x426 0x11>,
@@ -1243,9 +1275,9 @@
 
 			iommus = <&apps_smmu 0x440 0x0>,
 				 <&apps_smmu 0x442 0x0>;
-			reg = <0 0x01e40000 0 0x8000>,
-			      <0 0x01e50000 0 0x3000>,
-			      <0 0x01e04000 0 0x23000>;
+			reg = <0x0 0x01e40000 0x0 0x8000>,
+			      <0x0 0x01e50000 0x0 0x3000>,
+			      <0x0 0x01e04000 0x0 0x23000>;
 			reg-names = "ipa-reg",
 				    "ipa-shared",
 				    "gsi";
@@ -1283,7 +1315,7 @@
 
 		adsp: remoteproc@3000000 {
 			compatible = "qcom,sm6350-adsp-pas";
-			reg = <0 0x03000000 0 0x100>;
+			reg = <0x0 0x03000000 0x0 0x10000>;
 
 			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1319,6 +1351,70 @@
 				label = "lpass";
 				qcom,remote-pid = <2>;
 
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+
+						q6usbdai: usbd {
+							compatible = "qcom,q6usb";
+							iommus = <&apps_smmu 0x100f 0x0>;
+							#sound-dai-cells = <1>;
+							qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1001 0x0>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
@@ -1351,8 +1447,8 @@
 
 		gpu: gpu@3d00000 {
 			compatible = "qcom,adreno-619.0", "qcom,adreno";
-			reg = <0 0x03d00000 0 0x40000>,
-			      <0 0x03d9e000 0 0x1000>;
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>;
 			reg-names = "kgsl_3d0_reg_memory",
 				    "cx_mem";
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
@@ -1419,7 +1515,7 @@
 
 		adreno_smmu: iommu@3d40000 {
 			compatible = "qcom,sm6350-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
-			reg = <0 0x03d40000 0 0x10000>;
+			reg = <0x0 0x03d40000 0x0 0x10000>;
 			#iommu-cells = <1>;
 			#global-interrupts = <2>;
 			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
@@ -1445,9 +1541,9 @@
 
 		gmu: gmu@3d6a000 {
 			compatible = "qcom,adreno-gmu-619.0", "qcom,adreno-gmu";
-			reg = <0 0x03d6a000 0 0x31000>,
-			      <0 0x0b290000 0 0x10000>,
-			      <0 0x0b490000 0 0x10000>;
+			reg = <0x0 0x03d6a000 0x0 0x31000>,
+			      <0x0 0x0b290000 0x0 0x10000>,
+			      <0x0 0x0b490000 0x0 0x10000>;
 			reg-names = "gmu",
 				    "gmu_pdc",
 				    "gmu_pdc_seq";
@@ -1489,7 +1585,7 @@
 
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm6350-gpucc";
-			reg = <0 0x03d90000 0 0x9000>;
+			reg = <0x0 0x03d90000 0x0 0x9000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_GPU_GPLL0_CLK>,
 				 <&gcc GCC_GPU_GPLL0_DIV_CLK>;
@@ -1503,7 +1599,7 @@
 
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm6350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1543,7 +1639,7 @@
 
 		cdsp: remoteproc@8300000 {
 			compatible = "qcom,sm6350-cdsp-pas";
-			reg = <0 0x08300000 0 0x10000>;
+			reg = <0x0 0x08300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1642,7 +1738,7 @@
 
 		sdhc_2: mmc@8804000 {
 			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0 0x08804000 0 0x1000>;
+			reg = <0x0 0x08804000 0x0 0x1000>;
 
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
@@ -1691,7 +1787,7 @@
 
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy";
-			reg = <0 0x088e3000 0 0x400>;
+			reg = <0x0 0x088e3000 0x0 0x400>;
 			status = "disabled";
 			#phy-cells = <0>;
 
@@ -1701,9 +1797,15 @@
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 		};
 
+		refgen: regulator@88e7000 {
+			compatible = "qcom,sm6350-refgen-regulator",
+				     "qcom,sm8250-refgen-regulator";
+			reg = <0x0 0x088e7000 0x0 0x84>;
+		};
+
 		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sm6350-qmp-usb3-dp-phy";
-			reg = <0 0x088e8000 0 0x3000>;
+			reg = <0x0 0x088e8000 0x0 0x3000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
@@ -1754,27 +1856,27 @@
 
 		dc_noc: interconnect@9160000 {
 			compatible = "qcom,sm6350-dc-noc";
-			reg = <0 0x09160000 0 0x3200>;
+			reg = <0x0 0x09160000 0x0 0x3200>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sm6350-llcc";
-			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
+			reg = <0x0 0x09200000 0x0 0x50000>, <0x0 0x09600000 0x0 0x50000>;
 			reg-names = "llcc0_base", "llcc_broadcast_base";
 		};
 
 		gem_noc: interconnect@9680000 {
 			compatible = "qcom,sm6350-gem-noc";
-			reg = <0 0x09680000 0 0x3e200>;
+			reg = <0x0 0x09680000 0x0 0x3e200>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		npu_noc: interconnect@9990000 {
 			compatible = "qcom,sm6350-npu-noc";
-			reg = <0 0x09990000 0 0x1600>;
+			reg = <0x0 0x09990000 0x0 0x1600>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
@@ -1878,7 +1980,7 @@
 
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm6350-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -1916,14 +2018,17 @@
 
 			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xcd00>;
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x540 0x0>;
+				num-hc-interrupters = /bits/ 16 <3>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,parkmode-disable-ss-quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				usb-role-switch;
@@ -1950,9 +2055,23 @@
 			};
 		};
 
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sm6350-videocc";
+			reg = <0x0 0x0aaf0000 0x0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>;
+			clock-names = "iface",
+				      "bi_tcxo",
+				      "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		cci0: cci@ac4a000 {
 			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
-			reg = <0 0x0ac4a000 0 0x1000>;
+			reg = <0x0 0x0ac4a000 0x0 0x1000>;
 			interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>;
 			power-domains = <&camcc TITAN_TOP_GDSC>;
 
@@ -1999,7 +2118,7 @@
 
 		cci1: cci@ac4b000 {
 			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
-			reg = <0 0x0ac4b000 0 0x1000>;
+			reg = <0x0 0x0ac4b000 0x0 0x1000>;
 			interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>;
 			power-domains = <&camcc TITAN_TOP_GDSC>;
 
@@ -2041,7 +2160,7 @@
 
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sm6350-camcc";
-			reg = <0 0x0ad00000 0 0x16000>;
+			reg = <0x0 0x0ad00000 0x0 0x16000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -2050,7 +2169,7 @@
 
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm6350-mdss";
-			reg = <0 0x0ae00000 0 0x1000>;
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
 			reg-names = "mdss";
 
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -2074,6 +2193,8 @@
 			power-domains = <&dispcc MDSS_GDSC>;
 			iommus = <&apps_smmu 0x800 0x2>;
 
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -2082,8 +2203,8 @@
 
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm6350-dpu";
-				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x2008>;
 				reg-names = "mdp", "vbif";
 
 				interrupt-parent = <&mdss>;
@@ -2165,12 +2286,12 @@
 			};
 
 			mdss_dp: displayport-controller@ae90000 {
-				compatible = "qcom,sm6350-dp", "qcom,sm8350-dp";
-				reg = <0 0xae90000 0 0x200>,
-				      <0 0xae90200 0 0x200>,
-				      <0 0xae90400 0 0x600>,
-				      <0 0xae91000 0 0x400>,
-				      <0 0xae91400 0 0x400>;
+				compatible = "qcom,sm6350-dp", "qcom,sc7180-dp";
+				reg = <0x0 0xae90000 0x0 0x200>,
+				      <0x0 0xae90200 0x0 0x200>,
+				      <0x0 0xae90400 0x0 0x600>,
+				      <0x0 0xae91000 0x0 0x400>,
+				      <0x0 0xae91400 0x0 0x400>;
 				interrupt-parent = <&mdss>;
 				interrupts = <12>;
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -2246,7 +2367,7 @@
 
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
-				reg = <0 0x0ae94000 0 0x400>;
+				reg = <0x0 0x0ae94000 0x0 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
@@ -2267,7 +2388,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 				power-domains = <&rpmhpd SM6350_MX>;
@@ -2275,6 +2397,8 @@
 				phys = <&mdss_dsi0_phy>;
 				phy-names = "dsi";
 
+				refgen-supply = <&refgen>;
+
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -2322,9 +2446,9 @@
 
 			mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-10nm";
-				reg = <0 0x0ae94400 0 0x200>,
-				      <0 0x0ae94600 0 0x280>,
-				      <0 0x0ae94a00 0 0x1e0>;
+				reg = <0x0 0x0ae94400 0x0 0x200>,
+				      <0x0 0x0ae94600 0x0 0x280>,
+				      <0x0 0x0ae94a00 0x0 0x1e0>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -2342,11 +2466,11 @@
 
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sm6350-dispcc";
-			reg = <0 0x0af00000 0 0x20000>;
+			reg = <0x0 0x0af00000 0x0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -2362,7 +2486,7 @@
 
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm6350-pdc", "qcom,pdc";
-			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
+			reg = <0x0 0x0b220000 0x0 0x30000>, <0x0 0x17c000f0 0x0 0x64>;
 			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
 					  <125 63 1>, <126 655 12>, <138 139 15>;
 			#interrupt-cells = <2>;
@@ -2372,8 +2496,8 @@
 
 		tsens0: thermal-sensor@c263000 {
 			compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c263000 0 0x1ff>, /* TM */
-			      <0 0x0c222000 0 0x8>; /* SROT */
+			reg = <0x0 0x0c263000 0x0 0x1ff>, /* TM */
+			      <0x0 0x0c222000 0x0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
 			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -2383,8 +2507,8 @@
 
 		tsens1: thermal-sensor@c265000 {
 			compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c265000 0 0x1ff>, /* TM */
-			      <0 0x0c223000 0 0x8>; /* SROT */
+			reg = <0x0 0x0c265000 0x0 0x1ff>, /* TM */
+			      <0x0 0x0c223000 0x0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
 			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
@@ -2394,7 +2518,7 @@
 
 		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0 0x0c300000 0 0x1000>;
+			reg = <0x0 0x0c300000 0x0 0x1000>;
 			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
 						     IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
@@ -2402,13 +2526,18 @@
 			#clock-cells = <0>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
-			reg = <0 0x0c440000 0 0x1100>,
-			      <0 0x0c600000 0 0x2000000>,
-			      <0 0x0e600000 0 0x100000>,
-			      <0 0x0e700000 0 0xa0000>,
-			      <0 0x0c40a000 0 0x26000>;
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -2422,7 +2551,7 @@
 
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,sm6350-tlmm";
-			reg = <0 0x0f100000 0 0x300000>;
+			reg = <0x0 0x0f100000 0x0 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
@@ -2601,7 +2730,7 @@
 
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sm6350-smmu-500", "arm,mmu-500";
-			reg = <0 0x15000000 0 0x100000>;
+			reg = <0x0 0x15000000 0x0 0x100000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
@@ -2699,7 +2828,7 @@
 
 		watchdog@17c10000 {
 			compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
-			reg = <0 0x17c10000 0 0x1000>;
+			reg = <0x0 0x17c10000 0x0 0x1000>;
 			clocks = <&sleep_clk>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 		};
@@ -2853,7 +2982,7 @@
 
 		cpufreq_hw: cpufreq@18323000 {
 			compatible = "qcom,sm6350-cpufreq-hw", "qcom,cpufreq-hw";
-			reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>;
+			reg = <0x0 0x18323000 0x0 0x1000>, <0x0 0x18325800 0x0 0x1000>;
 			reg-names = "freq-domain0", "freq-domain1";
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
 			clock-names = "xo", "alternate";
@@ -2864,7 +2993,7 @@
 
 		wifi: wifi@18800000 {
 			compatible = "qcom,wcn3990-wifi";
-			reg = <0 0x18800000 0 0x800000>;
+			reg = <0x0 0x18800000 0x0 0x800000>;
 			reg-names = "membase";
 			memory-region = <&wlan_fw_mem>;
 			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
@@ -2885,6 +3014,9 @@
 		};
 	};
 
+	sound: sound {
+	};
+
 	thermal-zones {
 		aoss0-thermal {
 			thermal-sensors = <&tsens0 0>;
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index e0b1c54e98c0..87d6600ccbd9 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -29,7 +29,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -971,6 +971,12 @@
 			status = "disabled";
 		};
 
+		refgen: regulator@162f000 {
+			compatible = "qcom,sm6375-refgen-regulator",
+				     "qcom,sm8250-refgen-regulator";
+			reg = <0x0 0x0162f000 0x0 0x84>;
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x01c40000 0 0x1100>,
@@ -1516,9 +1522,9 @@
 			#power-domain-cells = <1>;
 		};
 
-		remoteproc_mss: remoteproc@6000000 {
+		remoteproc_mss: remoteproc@6080000 {
 			compatible = "qcom,sm6375-mpss-pas";
-			reg = <0 0x06000000 0 0x4040>;
+			reg = <0x0 0x06080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1559,7 +1565,7 @@
 
 		remoteproc_adsp: remoteproc@a400000 {
 			compatible = "qcom,sm6375-adsp-pas";
-			reg = <0 0x0a400000 0 0x100>;
+			reg = <0 0x0a400000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1595,9 +1601,9 @@
 			};
 		};
 
-		remoteproc_cdsp: remoteproc@b000000 {
+		remoteproc_cdsp: remoteproc@b300000 {
 			compatible = "qcom,sm6375-cdsp-pas";
-			reg = <0x0 0x0b000000 0x0 0x100000>;
+			reg = <0x0 0x0b300000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 2ee2561b57b1..4afbab570ca1 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -19,6 +19,7 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/usb/pd.h>
 #include "sm7225.dtsi"
 #include "pm6150l.dtsi"
@@ -32,7 +33,7 @@
 	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
-	qcom,msm-id = <434 0x10000>, <459 0x10000>;
+	qcom,msm-id = <459 0x10000>;
 	qcom,board-id = <8 32>;
 
 	aliases {
@@ -938,6 +939,12 @@
 	};
 };
 
+&q6asmdai {
+	dai@0 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+	};
+};
+
 &qup_uart1_cts {
 	/*
 	 * Configure a bias-bus-hold on CTS to lower power
@@ -1006,6 +1013,35 @@
 	status = "okay";
 };
 
+&sound {
+	compatible = "fairphone,fp4-sndcard";
+	model = "Fairphone 4";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	usb-dai-link {
+		link-name = "USB Playback";
+
+		codec {
+			sound-dai = <&q6usbdai USB_RX>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai USB_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <13 4>, <56 2>;
 
diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
index a5cda478bd78..cb59c122f6f6 100644
--- a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
+++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
@@ -253,6 +253,124 @@
 		regulator-max-microvolt = <3700000>;
 	};
 
+	vreg_cam_vio_1p8: regulator-cam-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_cam_vio_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* Always-on prevents CCI bus timeouts */
+		regulator-always-on;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camf_vana_2p8: regulator-camf-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camf_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camf_vdig_1p1: regulator-camf-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camf_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
+	vreg_camu_vaf_1p8: regulator-camu-vaf {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vaf_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camu_vana_2p8: regulator-camu-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camu_vdig_1p1: regulator-camu-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
+	vreg_camw_vaf_1p8: regulator-camw-vaf {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vaf_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camw_vana_2p8: regulator-camw-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camw_vdig_1p1: regulator-camw-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
 	// S2B is really ebi.lvl but it's there for supply map completeness sake.
 	vreg_s2b_0p7: smpa3-regulator {
 		compatible = "regulator-fixed";
@@ -714,11 +832,26 @@
 };
 
 &cci0 {
+	/*
+	 * cci0_i2c1 bus is unused and GPIO 71&72 are repurposed.
+	 * So set only cci0_i2c0 pinctrl here.
+	 */
+	pinctrl-0 = <&cci0_default>;
+	pinctrl-1 = <&cci0_sleep>;
+
 	status = "okay";
 };
 
 &cci0_i2c0 {
-	/* sony,imx471 (Front) */
+	/* D-PHY sony,imx471 (Front) @ 0x1a */
+
+	camf_p24c64f: eeprom@52 {
+		compatible = "puya,p24c64f",
+			     "atmel,24c64";
+		reg = <0x52>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
 };
 
 &cci1 {
@@ -726,11 +859,29 @@
 };
 
 &cci1_i2c0 {
-	/* samsung,s5kjn1 (Rear-aux UW) */
+	/* actuator (For Ultra Wide sensor) @ 0xc */
+	/* D-PHY samsung,s5kjn1 (Ultra Wide) @ 0x2d */
+
+	camu_gt24p128e: eeprom@51 {
+		compatible = "giantec,gt24p128e",
+			     "atmel,24c128";
+		reg = <0x51>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
 };
 
 &cci1_i2c1 {
-	/* sony,imx766 (Rear Wide) */
+	/* actuator (For Wide sensor) @ 0xc */
+	/* C-PHY sony,imx766 (Wide) @ 0x10 */
+
+	camw_gt24p128e: eeprom@50 {
+		compatible = "giantec,gt24p128e",
+			     "atmel,24c128";
+		reg = <0x50>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
 };
 
 &gcc {
@@ -757,6 +908,10 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
 &gpu_zap_shader {
 	firmware-name = "qcom/sm7325/nothing/spacewar/a660_zap.mbn";
 };
@@ -823,15 +978,49 @@
 	status = "okay";
 };
 
-/* MDSS remains disabled until the panel driver is present. */
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
+
+&mdss {
+	status = "okay";
+};
+
 &mdss_dsi {
 	vdda-supply = <&vdd_a_dsi_0_1p2>;
+	status = "okay";
+
+	panel: panel@0 {
+		compatible = "nothing,rm692e5-spacewar",
+			     "visionox,rm692e5";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
 
-	/* Visionox RM692E5 panel */
+		vdd-supply = <&vdd_oled>;
+		vddio-supply = <&vdd_io_oled>;
+
+		pinctrl-0 = <&lcd_reset_n>,
+			    <&mdp_vsync_p>;
+		pinctrl-names = "default";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
 };
 
 &mdss_dsi_phy {
 	vdds-supply = <&vdd_a_dsi_0_0p9>;
+	status = "okay";
 };
 
 &pm7325_gpios {
@@ -1039,7 +1228,7 @@
 
 &q6asmdai {
 	dai@0 {
-		reg = <0>;
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
 	};
 };
 
@@ -1147,6 +1336,20 @@
 		bias-pull-down;
 	};
 
+	lcd_reset_n: lcd-reset-n-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdp_vsync_p: mdp-vsync-p-state {
+		pins = "gpio80";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	hst_bt_en: hst-bt-en-state {
 		pins = "gpio85";
 		function = "gpio";
@@ -1227,16 +1430,14 @@
 &usb_1 {
 	/* USB 2.0 only */
 	qcom,select-utmi-as-pipe-clk;
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
 	maximum-speed = "high-speed";
 	/* Remove USB3 phy */
 	phys = <&usb_1_hsphy>;
 	phy-names = "usb2-phy";
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm7325.dtsi b/arch/arm64/boot/dts/qcom/sm7325.dtsi
index 85d34b53e5e9..beb279956df6 100644
--- a/arch/arm64/boot/dts/qcom/sm7325.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm7325.dtsi
@@ -4,7 +4,7 @@
  * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com>
  */
 
-#include "sc7280.dtsi"
+#include "kodiak.dtsi"
 
 /* SM7325 uses Kryo 670 */
 &cpu0 { compatible = "qcom,kryo670"; };
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index bac08f00b303..0339a572f34d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -478,15 +478,11 @@
 
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
@@ -500,18 +496,15 @@
 	qcom,dual-dsi-mode;
 
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_b>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi1_out {
+	remote-endpoint = <&lt9611_b>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi1_phy {
@@ -578,6 +571,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -714,5 +712,5 @@
 	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
 
-	qcom,ath10k-calibration-variant = "Qualcomm_sm8150hdk";
+	qcom,calibration-variant = "Qualcomm_sm8150hdk";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index b039773c4465..835ef929ff2d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -376,8 +376,8 @@
 		pinctrl-0 = <&da7280_intr_default>;
 
 		dlg,actuator-type = "LRA";
-		dlg,dlg,const-op-mode = <1>;
-		dlg,dlg,periodic-op-mode = <1>;
+		dlg,const-op-mode = <1>;
+		dlg,periodic-op-mode = <1>;
 		dlg,nom-microvolt = <2000000>;
 		dlg,abs-max-microvolt = <2000000>;
 		dlg,imax-microamp = <129000>;
@@ -430,6 +430,11 @@
 	/* MAX34417 @ 0x1e */
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -448,22 +453,22 @@
 
 &remoteproc_adsp {
 	status = "okay";
-	firmware-name = "qcom/sm8150/microsoft/adsp.mdt";
+	firmware-name = "qcom/sm8150/microsoft/adsp.mbn";
 };
 
 &remoteproc_cdsp {
 	status = "okay";
-	firmware-name = "qcom/sm8150/microsoft/cdsp.mdt";
+	firmware-name = "qcom/sm8150/microsoft/cdsp.mbn";
 };
 
 &remoteproc_mpss {
 	status = "okay";
-	firmware-name = "qcom/sm8150/microsoft/modem.mdt";
+	firmware-name = "qcom/sm8150/microsoft/modem.mbn";
 };
 
 &remoteproc_slpi {
 	status = "okay";
-	firmware-name = "qcom/sm8150/microsoft/slpi.mdt";
+	firmware-name = "qcom/sm8150/microsoft/slpi.mbn";
 };
 
 &pon_resin {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 256a1ba94945..12e8e1ada6d8 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -358,6 +358,11 @@
 	status = "okay";
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -374,22 +379,22 @@
 
 &remoteproc_adsp {
 	status = "okay";
-	firmware-name = "qcom/sm8150/adsp.mdt";
+	firmware-name = "qcom/sm8150/adsp.mbn";
 };
 
 &remoteproc_cdsp {
 	status = "okay";
-	firmware-name = "qcom/sm8150/cdsp.mdt";
+	firmware-name = "qcom/sm8150/cdsp.mbn";
 };
 
 &remoteproc_mpss {
 	status = "okay";
-	firmware-name = "qcom/sm8150/modem.mdt";
+	firmware-name = "qcom/sm8150/modem.mbn";
 };
 
 &remoteproc_slpi {
 	status = "okay";
-	firmware-name = "qcom/sm8150/slpi.mdt";
+	firmware-name = "qcom/sm8150/slpi.mbn";
 };
 
 &tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index ae0ca48b89a5..70fd6455518b 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -601,6 +601,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index cedae8d03a51..e3ec99972a28 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,videocc-sm8150.h>
@@ -1852,7 +1853,8 @@
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1860,30 +1862,27 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "tbu",
-				      "ref";
+				      "slave_q2a";
 
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
@@ -1969,7 +1968,8 @@
 				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1977,30 +1977,27 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
-				      "slave_q2a",
-				      "tbu",
-				      "ref";
+				      "slave_q2a";
 
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
@@ -2258,7 +2255,7 @@
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&gpu_mem>;
 			};
 
@@ -3472,6 +3469,12 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
+		refgen: regulator@88e7000 {
+			compatible = "qcom,sm8150-refgen-regulator",
+				     "qcom,sdm845-refgen-regulator";
+			reg = <0x0 0x088e7000 0x0 0x60>;
+		};
+
 		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sm8150-qmp-usb3-dp-phy";
 			reg = <0 0x088e8000 0 0x3000>;
@@ -3657,7 +3660,10 @@
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x140 0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
@@ -3734,7 +3740,10 @@
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -3804,7 +3813,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8150-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3887,16 +3896,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3905,7 +3918,7 @@
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&dp_opp_table>;
-				power-domains = <&rpmhpd SM8250_MMCX>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
 
 				status = "disabled";
 
@@ -3977,14 +3990,16 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SM8150_MMCX>;
 
 				phys = <&mdss_dsi0_phy>;
 
+				refgen-supply = <&refgen>;
+
 				status = "disabled";
 
 				#address-cells = <1>;
@@ -4070,14 +4085,16 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SM8150_MMCX>;
 
 				phys = <&mdss_dsi1_phy>;
 
+				refgen-supply = <&refgen>;
+
 				status = "disabled";
 
 				#address-cells = <1>;
@@ -4126,10 +4143,10 @@
 			compatible = "qcom,sm8150-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -4363,6 +4380,7 @@
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
@@ -4416,7 +4434,7 @@
 			frame@17c27000 {
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c26000 0x1000>;
+				reg = <0x17c27000 0x1000>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
index 1bbb71e1a4fc..f5c193c6c5f9 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
@@ -373,6 +373,11 @@
 	status = "okay";
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 21b2ca1def83..51779b99176d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -484,11 +484,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sm8250/a650_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8250/a650_zap.mbn";
 };
 
 &i2c1 {
@@ -627,6 +626,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
new file mode 100644
index 000000000000..ef7ea4f72bf9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_n>;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@9fa00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9fa00000 0x0 0x100000>;
+			record-size = <0x4000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x40000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio3";
+		function = "normal";
+		power-source = <0>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <20 4>, /* SPI (fingerprint scanner) */
+			       <40 4>; /* Unused */
+};
+
+&usb_1 {
+	/* Limit to USB 2.0 for now */
+	qcom,select-utmi-as-pipe-clk;
+
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts b/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
new file mode 100644
index 000000000000..dc7c3816f156
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "sm8250-samsung-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy S20 FE";
+	compatible = "samsung,r8q", "qcom,sm8250";
+	chassis-type = "handset";
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/Samsung/r8q/adsp.mbn";
+	status = "okay";
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/Samsung/r8q/cdsp.mbn";
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/Samsung/r8q/slpi.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts b/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts
new file mode 100644
index 000000000000..d6aeb5af2ba4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "sm8250-samsung-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy S20";
+	compatible = "samsung,x1q", "qcom,sm8250";
+	chassis-type = "handset";
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/Samsung/x1q/adsp.mbn";
+	status = "okay";
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/Samsung/x1q/cdsp.mbn";
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/Samsung/x1q/slpi.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index f6870d3f2886..d8289b2698f3 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -591,6 +591,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 3596dd328c31..c017399297b9 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -30,6 +30,10 @@
 	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
 	qcom,board-id = <0x10008 0>;
 
+	aliases {
+		serial0 = &uart6;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -97,6 +101,67 @@
 		};
 	};
 
+	qca6390-pmu {
+		compatible = "qcom,qca6390-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddpmu-supply = <&vreg_s6a_0p95>;
+		vddrfa0p95-supply = <&vreg_s6a_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p35>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+		vddpcie1p3-supply = <&vreg_s8c_1p35>;
+		vddpcie1p9-supply = <&vreg_s5a_1p9>;
+		vddio-supply = <&vreg_s4a_1p8>;
+
+		wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -489,11 +554,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn";
 };
 
 &i2c0 {
@@ -594,7 +658,8 @@
 	qcom,dual-dsi-mode;
 	qcom,sync-dual-dsi;
 	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 	status = "okay";
 };
 
@@ -619,6 +684,25 @@
 	status = "okay";
 };
 
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1101";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+
+		qcom,calibration-variant = "Xiaomi_Pad_5Pro";
+	};
+};
+
 &pm8150_gpios {
 	vol_up_n: vol-up-n-state {
 		pins = "gpio6";
@@ -673,6 +757,11 @@
 	status = "okay";
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -701,6 +790,37 @@
 
 &tlmm {
 	gpio-reserved-ranges = <40 4>;
+
+	bt_en_state: bt-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
+	wlan_en_state: wlan-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6390-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+	};
 };
 
 &usb_1 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
index 86e1f7fd1c20..078ba13f8762 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
@@ -12,7 +12,6 @@
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
 #include "pm8150l.dtsi"
-#include "pm8009.dtsi"
 
 /*
  * Delete following upstream (sm8250.dtsi) reserved
@@ -50,18 +49,12 @@
 		};
 	};
 
-	battery_l: battery-l {
+	battery: battery {
 		compatible = "simple-battery";
-		voltage-min-design-microvolt = <3870000>;
-		energy-full-design-microwatt-hours = <16700000>;
-		charge-full-design-microamp-hours = <4420000>;
-	};
-
-	battery_r: battery-r {
-		compatible = "simple-battery";
-		voltage-min-design-microvolt = <3870000>;
-		energy-full-design-microwatt-hours = <16700000>;
-		charge-full-design-microamp-hours = <4420000>;
+		charge-full-design-microamp-hours = <8840000>;
+		energy-full-design-microwatt-hours = <34300000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4370000>;
 	};
 
 	bl_vddpos_5p5: bl-vddpos-regulator {
@@ -406,63 +399,6 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
-
-	regulators-2 {
-		compatible = "qcom,pm8009-rpmh-regulators";
-		qcom,pmic-id = "f";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vreg_bob>;
-		vdd-l2-supply = <&vreg_s8c_1p35>;
-		vdd-l5-l6-supply = <&vreg_bob>;
-		vdd-l7-supply = <&vreg_s4a_1p8>;
-
-		vreg_s1f_1p2: smps1 {
-			regulator-name = "vreg_s1f_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s2f_0p5: smps2 {
-			regulator-name = "vreg_s2f_0p5";
-			regulator-min-microvolt = <512000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		/* L1 is unused. */
-
-		vreg_l2f_1p3: ldo2 {
-			regulator-name = "vreg_l2f_1p3";
-			regulator-min-microvolt = <1056000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		/* L3 & L4 are unused. */
-
-		vreg_l5f_2p8: ldo5 {
-			regulator-name = "vreg_l5f_2p85";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6f_2p8: ldo6 {
-			regulator-name = "vreg_l6f_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7f_1p8: ldo7 {
-			regulator-name = "vreg_l7f_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
 };
 
 &cdsp {
@@ -488,22 +424,10 @@
 
 &gpu {
 	status = "okay";
-
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn";
-	};
 };
 
-&i2c0 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	fuel-gauge@55 {
-		compatible = "ti,bq27z561";
-		reg = <0x55>;
-		monitored-battery = <&battery_r>;
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn";
 };
 
 &i2c11 {
@@ -523,17 +447,6 @@
 	};
 };
 
-&i2c13 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	fuel-gauge@55 {
-		compatible = "ti,bq27z561";
-		reg = <0x55>;
-		monitored-battery = <&battery_l>;
-	};
-};
-
 &pcie0 {
 	status = "okay";
 };
@@ -554,6 +467,11 @@
 	};
 };
 
+&pon {
+	mode-bootloader = <0x2>;
+	mode-recovery = <0x1>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 48318ed1ce98..c7dffa440074 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -84,7 +85,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -606,7 +607,7 @@
 		};
 
 		cpu7_opp9: opp-1747200000 {
-			opp-hz = /bits/ 64 <1708800000>;
+			opp-hz = /bits/ 64 <1747200000>;
 			opp-peak-kBps = <5412000 42393600>;
 		};
 
@@ -1029,7 +1030,7 @@
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1074,7 +1075,7 @@
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1119,7 +1120,7 @@
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1164,7 +1165,7 @@
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1226,7 +1227,7 @@
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1288,7 +1289,7 @@
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1369,7 +1370,7 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1414,7 +1415,7 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1459,7 +1460,7 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1521,7 +1522,7 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1566,7 +1567,7 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1611,7 +1612,7 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1656,7 +1657,7 @@
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1718,7 +1719,7 @@
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1796,7 +1797,7 @@
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1841,7 +1842,7 @@
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1886,7 +1887,7 @@
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1931,7 +1932,7 @@
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1976,7 +1977,7 @@
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -2038,7 +2039,7 @@
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -2149,7 +2150,8 @@
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -2157,13 +2159,14 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2269,7 +2272,8 @@
 				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -2277,13 +2281,14 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
@@ -2394,7 +2399,8 @@
 				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -2402,13 +2408,14 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
 				 <&gcc GCC_PCIE_2_AUX_CLK>,
@@ -2937,7 +2944,7 @@
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&gpu_mem>;
 			};
 
@@ -3894,6 +3901,11 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
+		refgen: regulator@88e7000 {
+			compatible = "qcom,sm8250-refgen-regulator";
+			reg = <0x0 0x088e7000 0x0 0x84>;
+		};
+
 		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sm8250-qmp-usb3-dp-phy";
 			reg = <0 0x088e8000 0 0x3000>;
@@ -4207,6 +4219,8 @@
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
@@ -4294,6 +4308,8 @@
 				iommus = <&apps_smmu 0x20 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -4327,14 +4343,6 @@
 
 			status = "disabled";
 
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4481,20 +4489,20 @@
 				    "vfe_lite0",
 				    "vfe_lite1";
 
-			interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csiphy0",
 					  "csiphy1",
 					  "csiphy2",
@@ -4648,7 +4656,6 @@
 			clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
 			power-domains = <&rpmhpd RPMHPD_MMCX>;
 			required-opps = <&rpmhpd_opp_low_svs>;
-			status = "disabled";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -4677,6 +4684,8 @@
 
 			iommus = <&apps_smmu 0x820 0x402>;
 
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
 			status = "disabled";
 
 			#address-cells = <2>;
@@ -4686,7 +4695,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8250-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -4769,16 +4778,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -4787,7 +4800,7 @@
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&dp_opp_table>;
-				power-domains = <&rpmhpd SM8250_MMCX>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
 
 				status = "disabled";
 
@@ -4857,14 +4870,18 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
 
 				phys = <&mdss_dsi0_phy>;
 
+				refgen-supply = <&refgen>;
+
 				status = "disabled";
 
 				#address-cells = <1>;
@@ -4949,14 +4966,18 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
 
 				phys = <&mdss_dsi1_phy>;
 
+				refgen-supply = <&refgen>;
+
 				status = "disabled";
 
 				#address-cells = <1>;
@@ -5007,10 +5028,10 @@
 			power-domains = <&rpmhpd RPMHPD_MMCX>;
 			required-opps = <&rpmhpd_opp_low_svs>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -6078,6 +6099,7 @@
 
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 796cbb58ef6e..5f975d009465 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -385,15 +385,11 @@
 &mdss_dsi0 {
 	vdda-supply = <&vreg_l6b_1p2>;
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy  {
@@ -407,10 +403,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/sm8350/a660_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8350/a660_zap.mbn";
 };
 
 &i2c13 {
@@ -925,3 +921,10 @@
 		};
 	};
 };
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	status = "okay";
+	firmware-name = "qcom/sm8350/ipa_fws.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 877905dfd861..5c8fe213f5e4 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -21,6 +22,7 @@
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 
@@ -42,7 +44,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 			#clock-cells = <0>;
 		};
 	};
@@ -455,7 +457,7 @@
 			no-map;
 		};
 
-		pil_camera_mem: mmeory@85200000 {
+		pil_camera_mem: memory@85200000 {
 			reg = <0x0 0x85200000 0x0 0x500000>;
 			no-map;
 		};
@@ -1536,7 +1538,8 @@
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1544,13 +1547,14 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1645,7 +1649,8 @@
 				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1653,13 +1658,14 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -1806,11 +1812,11 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x594 0x0011>,
 				 <&apps_smmu 0x596 0x0011>;
-			/* FIXME: Probing BAM DMA causes some abort and system hang */
-			status = "fail";
 		};
 
 		crypto: crypto@1dfa000 {
@@ -1822,8 +1828,6 @@
 				 <&apps_smmu 0x596 0x0011>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "memory";
-			/* FIXME: dependency BAM DMA is disabled */
-			status = "disabled";
 		};
 
 		ipa: ipa@1e40000 {
@@ -1876,6 +1880,142 @@
 			reg = <0x0 0x1fc0000 0x0 0x30000>;
 		};
 
+		adsp: remoteproc@3000000 {
+			compatible = "qcom,sm8350-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1801 0x0>;
+
+							dai@0 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+							};
+
+							dai@1 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+							};
+
+							dai@2 {
+								reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		lpass_tlmm: pinctrl@33c0000 {
 			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0 0x20000>,
@@ -1911,7 +2051,7 @@
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&pil_gpu_mem>;
 			};
 
@@ -2078,7 +2218,7 @@
 
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8350-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2360,6 +2500,115 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		cdsp: remoteproc@a300000 {
+			compatible = "qcom,sm8350-cdsp-pas";
+			reg = <0x0 0x0a300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2161 0x0400>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2162 0x0400>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2163 0x0400>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2164 0x0400>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2165 0x0400>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2166 0x0400>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2167 0x0400>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2168 0x0400>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -2408,7 +2657,10 @@
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
@@ -2484,7 +2736,10 @@
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x20 0x0>;
 				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
 				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -2527,7 +2782,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8350-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -2621,16 +2876,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -2711,8 +2970,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi0_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -2810,8 +3069,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi1_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -2891,8 +3150,10 @@
 			compatible = "qcom,sm8350-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
@@ -3285,144 +3546,9 @@
 			dma-coherent;
 		};
 
-		adsp: remoteproc@17300000 {
-			compatible = "qcom,sm8350-adsp-pas";
-			reg = <0 0x17300000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&pil_adsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				apr {
-					compatible = "qcom,apr-v2";
-					qcom,glink-channels = "apr_audio_svc";
-					qcom,domain = <APR_DOMAIN_ADSP>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					service@3 {
-						reg = <APR_SVC_ADSP_CORE>;
-						compatible = "qcom,q6core";
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-					};
-
-					q6afe: service@4 {
-						compatible = "qcom,q6afe";
-						reg = <APR_SVC_AFE>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6afedai: dais {
-							compatible = "qcom,q6afe-dais";
-							#address-cells = <1>;
-							#size-cells = <0>;
-							#sound-dai-cells = <1>;
-						};
-
-						q6afecc: clock-controller {
-							compatible = "qcom,q6afe-clocks";
-							#clock-cells = <2>;
-						};
-					};
-
-					q6asm: service@7 {
-						compatible = "qcom,q6asm";
-						reg = <APR_SVC_ASM>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6asmdai: dais {
-							compatible = "qcom,q6asm-dais";
-							#address-cells = <1>;
-							#size-cells = <0>;
-							#sound-dai-cells = <1>;
-							iommus = <&apps_smmu 0x1801 0x0>;
-
-							dai@0 {
-								reg = <0>;
-							};
-
-							dai@1 {
-								reg = <1>;
-							};
-
-							dai@2 {
-								reg = <2>;
-							};
-						};
-					};
-
-					q6adm: service@8 {
-						compatible = "qcom,q6adm";
-						reg = <APR_SVC_ADM>;
-						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-
-						q6routing: routing {
-							compatible = "qcom,q6adm-routing";
-							#sound-dai-cells = <0>;
-						};
-					};
-				};
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1803 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1804 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1805 0x0>;
-					};
-				};
-			};
-		};
-
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
@@ -3589,115 +3715,6 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
-
-		cdsp: remoteproc@98900000 {
-			compatible = "qcom,sm8350-cdsp-pas";
-			reg = <0 0x98900000 0 0x1400000>;
-
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>;
-			power-domain-names = "cx", "mxc";
-
-			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
-			memory-region = <&pil_cdsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_cdsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_CDSP
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "cdsp";
-				qcom,remote-pid = <5>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "cdsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@1 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <1>;
-						iommus = <&apps_smmu 0x2161 0x0400>,
-							 <&apps_smmu 0x1181 0x0420>;
-					};
-
-					compute-cb@2 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <2>;
-						iommus = <&apps_smmu 0x2162 0x0400>,
-							 <&apps_smmu 0x1182 0x0420>;
-					};
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x2163 0x0400>,
-							 <&apps_smmu 0x1183 0x0420>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x2164 0x0400>,
-							 <&apps_smmu 0x1184 0x0420>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x2165 0x0400>,
-							 <&apps_smmu 0x1185 0x0420>;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x2166 0x0400>,
-							 <&apps_smmu 0x1186 0x0420>;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x2167 0x0400>,
-							 <&apps_smmu 0x1187 0x0420>;
-					};
-
-					compute-cb@8 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <8>;
-						iommus = <&apps_smmu 0x2168 0x0400>,
-							 <&apps_smmu 0x1188 0x0420>;
-					};
-
-					/* note: secure cb9 in downstream */
-				};
-			};
-		};
 	};
 
 	thermal_zones: thermal-zones {
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index 2ff40a120aad..268ae0cd642a 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -643,10 +643,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/sm8450/a730_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8450/a730_zap.mbn";
 };
 
 &i2c9 {
@@ -1199,11 +1199,6 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-};
-
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index 8c39fbcaad80..56db5f79f59d 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -28,6 +28,49 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+					};
+				};
+
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -461,8 +504,8 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "peripheral";
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
 &usb_1_hsphy {
@@ -487,3 +530,7 @@
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p91>;
 };
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts b/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
new file mode 100644
index 000000000000..880d74ae6032
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sm8450.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350c.dtsi"
+
+/ {
+	model = "Samsung Galaxy S22 5G";
+	compatible = "samsung,r0q", "qcom,sm8450";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@b8000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		/*
+		 * The bootloader will only keep display hardware enabled
+		 * if this memory region is named exactly 'splash_region'
+		 */
+		splash-region@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			no-map;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <36 4>; /* SPI (not linked to anything) */
+};
+
+&usb_1 {
+	/* Keep USB 2.0 only for now */
+	qcom,select-utmi-as-pipe-clk;
+
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
index cc1335a07a35..6bd315e10992 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -781,11 +781,8 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "peripheral";
+	status = "okay";
 };
 
 &usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 53147aa6f7e4..920a2d1c04d0 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sm8450.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
@@ -43,7 +44,7 @@
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32000>;
+			clock-frequency = <32764>;
 		};
 	};
 
@@ -287,6 +288,192 @@
 		};
 	};
 
+	ete-0 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu0>;
+
+		out-ports {
+			port {
+				ete0_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete0>;
+				};
+			};
+		};
+	};
+
+	ete-1 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu1>;
+
+		out-ports {
+			port {
+				ete1_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete1>;
+				};
+			};
+		};
+	};
+
+	ete-2 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu2>;
+
+		out-ports {
+			port {
+				ete2_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete2>;
+				};
+			};
+		};
+	};
+
+	ete-3 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu3>;
+
+		out-ports {
+			port {
+				ete3_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete3>;
+				};
+			};
+		};
+	};
+
+	ete-4 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu4>;
+
+		out-ports {
+			port {
+				ete4_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete4>;
+				};
+			};
+		};
+	};
+
+	ete-5 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu5>;
+
+		out-ports {
+			port {
+				ete5_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete5>;
+				};
+			};
+		};
+	};
+
+	ete-6 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu6>;
+
+		out-ports {
+			port {
+				ete6_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete6>;
+				};
+			};
+		};
+	};
+
+	ete-7 {
+		compatible = "arm,embedded-trace-extension";
+		cpu = <&cpu7>;
+
+		out-ports {
+			port {
+				ete7_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete7>;
+				};
+			};
+		};
+	};
+
+	funnel-ete {
+		compatible = "arm,coresight-static-funnel";
+
+		out-ports {
+			port {
+				funnel_ete_out_funnel_apss: endpoint {
+					remote-endpoint =
+						<&funnel_apss_in_funnel_ete>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel_ete_in_ete0: endpoint {
+					remote-endpoint =
+						<&ete0_out_funnel_ete>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel_ete_in_ete1: endpoint {
+					remote-endpoint =
+						<&ete1_out_funnel_ete>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel_ete_in_ete2: endpoint {
+					remote-endpoint =
+						<&ete2_out_funnel_ete>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel_ete_in_ete3: endpoint {
+					remote-endpoint =
+						<&ete3_out_funnel_ete>;
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+				funnel_ete_in_ete4: endpoint {
+					remote-endpoint =
+						<&ete4_out_funnel_ete>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				funnel_ete_in_ete5: endpoint {
+					remote-endpoint =
+						<&ete5_out_funnel_ete>;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				funnel_ete_in_ete6: endpoint {
+					remote-endpoint =
+						<&ete6_out_funnel_ete>;
+				};
+			};
+
+			port@7 {
+				reg = <7>;
+				funnel_ete_in_ete7: endpoint {
+					remote-endpoint =
+						<&ete7_out_funnel_ete>;
+				};
+			};
+		};
+	};
+
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8450", "qcom,scm";
@@ -1800,10 +1987,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
@@ -1860,25 +2047,28 @@
 			pcie0_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				/* GEN 1 x1 */
+				/* 2.5 GT/s x1 */
 				opp-2500000 {
 					opp-hz = /bits/ 64 <2500000>;
 					required-opps = <&rpmhpd_opp_low_svs>;
 					opp-peak-kBps = <250000 1>;
+					opp-level = <1>;
 				};
 
-				/* GEN 2 x1 */
+				/* 5 GT/s x1 */
 				opp-5000000 {
 					opp-hz = /bits/ 64 <5000000>;
 					required-opps = <&rpmhpd_opp_low_svs>;
 					opp-peak-kBps = <500000 1>;
+					opp-level = <2>;
 				};
 
-				/* GEN 3 x1 */
+				/* 8 GT/s x1 */
 				opp-8000000 {
 					opp-hz = /bits/ 64 <8000000>;
 					required-opps = <&rpmhpd_opp_nom>;
 					opp-peak-kBps = <984500 1>;
+					opp-level = <3>;
 				};
 			};
 
@@ -1964,10 +2154,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
@@ -2022,46 +2212,68 @@
 			pcie1_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-				/* GEN 1 x1 */
-				opp-2500000 {
+				/* 2.5 GT/s x1 */
+				opp-2500000-1 {
 					opp-hz = /bits/ 64 <2500000>;
 					required-opps = <&rpmhpd_opp_low_svs>;
 					opp-peak-kBps = <250000 1>;
+					opp-level = <1>;
 				};
 
-				/* GEN 1 x2 and GEN 2 x1 */
-				opp-5000000 {
+				/* 2.5 GT/s x2 */
+				opp-5000000-1 {
 					opp-hz = /bits/ 64 <5000000>;
 					required-opps = <&rpmhpd_opp_low_svs>;
 					opp-peak-kBps = <500000 1>;
+					opp-level = <1>;
 				};
 
-				/* GEN 2 x2 */
-				opp-10000000 {
+				/* 5 GT/s x1 */
+				opp-5000000-2 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <2>;
+				};
+
+				/* 5 GT/s x2 */
+				opp-10000000-2 {
 					opp-hz = /bits/ 64 <10000000>;
 					required-opps = <&rpmhpd_opp_low_svs>;
 					opp-peak-kBps = <1000000 1>;
+					opp-level = <2>;
 				};
 
-				/* GEN 3 x1 */
-				opp-8000000 {
+				/* 8 GT/s x1 */
+				opp-8000000-3 {
 					opp-hz = /bits/ 64 <8000000>;
 					required-opps = <&rpmhpd_opp_nom>;
 					opp-peak-kBps = <984500 1>;
+					opp-level = <3>;
+				};
+
+				/* 8 GT/s x2 */
+				opp-16000000-3 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+					opp-level = <3>;
 				};
 
-				/* GEN 3 x2 and GEN 4 x1 */
-				opp-16000000 {
+				/* 16 GT/s x1 */
+				opp-16000000-4 {
 					opp-hz = /bits/ 64 <16000000>;
 					required-opps = <&rpmhpd_opp_nom>;
 					opp-peak-kBps = <1969000 1>;
+					opp-level = <4>;
 				};
 
-				/* GEN 4 x2 */
-				opp-32000000 {
+				/* 16 GT/s x2 */
+				opp-32000000-4 {
 					opp-hz = /bits/ 64 <32000000>;
 					required-opps = <&rpmhpd_opp_nom>;
 					opp-peak-kBps = <3938000 1>;
+					opp-level = <4>;
 				};
 			};
 
@@ -2076,6 +2288,68 @@
 			};
 		};
 
+		pcie1_ep: pcie-ep@1c08000 {
+			compatible = "qcom,sm8450-pcie-ep";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40200000 0x0 0x1000000>,
+			      <0x0 0x01c0b000 0x0 0x1000>,
+			      <0x0 0x40002000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio",
+				    "dma";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "ddrss_sf_tbu",
+				      "aggre_noc_axi";
+
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global",
+					  "doorbell",
+					  "dma";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			iommus = <&apps_smmu 0x1c80 0x7f>;
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_1_GDSC>;
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			num-lanes = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_default_state>;
+
+			status = "disabled";
+		};
+
 		pcie1_phy: phy@1c0e000 {
 			compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
 			reg = <0 0x01c0e000 0 0x2000>;
@@ -2185,7 +2459,7 @@
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&gpu_micro_code_mem>;
 			};
 
@@ -2496,6 +2770,112 @@
 			};
 		};
 
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,sm8450-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		wsa2macro: codec@31e0000 {
 			compatible = "qcom,sm8450-lpass-wsa-macro";
 			reg = <0 0x031e0000 0 0x1000>;
@@ -2692,115 +3072,9 @@
 			status = "disabled";
 		};
 
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8450-adsp-pas";
-			reg = <0 0x30000000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&adsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1801 0x0>;
-						};
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1803 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1804 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1805 0x0>;
-					};
-				};
-			};
-		};
-
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8450-cdsp-pas";
-			reg = <0 0x32300000 0 0x1400000>;
+			reg = <0 0x32300000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2907,7 +3181,7 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8450-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -2950,8 +3224,10 @@
 			reg = <0 0x0aaf0000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_VIDEO_AHB_CLK>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3042,12 +3318,13 @@
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&sleep_clk>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			status = "disabled";
 		};
 
 		mdss: display-subsystem@ae00000 {
@@ -3088,7 +3365,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8450-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -3182,16 +3459,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3270,8 +3551,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -3362,8 +3645,10 @@
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 				power-domains = <&rpmhpd RPMHPD_MMCX>;
@@ -3422,10 +3707,10 @@
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&gcc GCC_DISP_AHB_CLK>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
@@ -3486,6 +3771,7 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c400000 {
@@ -4144,6 +4430,546 @@
 			};
 		};
 
+		stm@10002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x10002000 0x0 0x1000>,
+				<0x0 0x16280000 0x0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out_funnel_in0: endpoint {
+						remote-endpoint =
+							<&funnel_in0_in_stm>;
+					};
+				};
+			};
+		};
+
+		funnel@10041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10041000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel_in0_in_stm: endpoint {
+						remote-endpoint =
+							<&stm_out_funnel_in0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_in0_out_funnel_qdss: endpoint {
+						remote-endpoint =
+							<&funnel_qdss_in_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@10042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x10042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel_in1_in_funnel_apss: endpoint {
+						remote-endpoint =
+							<&funnel_apss_out_funnel_in1>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					funnel_in1_in_funnel_dl_center: endpoint {
+						remote-endpoint =
+							<&funnel_dl_center_out_funnel_in1>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_in1_out_funnel_qdss: endpoint {
+						remote-endpoint =
+							<&funnel_qdss_in_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@10045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_qdss_in_funnel_in0: endpoint {
+						remote-endpoint =
+							<&funnel_in0_out_funnel_qdss>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_qdss_in_funnel_in1: endpoint {
+						remote-endpoint =
+							<&funnel_in1_out_funnel_qdss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_qdss_out_funnel_aoss: endpoint {
+						remote-endpoint =
+							<&funnel_aoss_in_funnel_qdss>;
+					};
+				};
+			};
+		};
+
+		replicator@10046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x10046000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_qdss_in_replicator_swao: endpoint {
+						remote-endpoint =
+							<&replicator_swao_out_replicator_qdss>;
+					};
+				};
+			};
+
+			out-ports {
+
+				port {
+					replicator_qdss_out_replicator_etr: endpoint {
+						remote-endpoint =
+							<&replicator_etr_in_replicator_qdss>;
+					};
+				};
+			};
+		};
+
+		tmc_etr: tmc@10048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x10048000 0x0 0x1000>;
+
+			iommus = <&apps_smmu 0x0600 0>;
+			arm,buffer-size = <0x10000>;
+
+			arm,scatter-gather;
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmc_etr_in_replicator_etr: endpoint {
+						remote-endpoint =
+							<&replicator_etr_out_tmc_etr>;
+					};
+				};
+			};
+		};
+
+		replicator@1004e000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x1004e000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_etr_in_replicator_qdss: endpoint {
+						remote-endpoint =
+							<&replicator_qdss_out_replicator_etr>;
+					};
+				};
+			};
+
+			out-ports {
+
+				port {
+
+					replicator_etr_out_tmc_etr: endpoint {
+						remote-endpoint =
+							<&tmc_etr_in_replicator_etr>;
+					};
+				};
+			};
+		};
+
+		funnel@10b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x10b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					funnel_aoss_in_tpda_aoss: endpoint {
+						remote-endpoint =
+							<&tpda_aoss_out_funnel_aoss>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel_aoss_in_funnel_qdss: endpoint {
+						remote-endpoint =
+							<&funnel_qdss_out_funnel_aoss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_aoss_out_tmc_etf: endpoint {
+						remote-endpoint =
+							<&tmc_etf_in_funnel_aoss>;
+					};
+				};
+			};
+		};
+
+		tmc@10b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x10b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmc_etf_in_funnel_aoss: endpoint {
+						remote-endpoint =
+							<&funnel_aoss_out_tmc_etf>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tmc_etf_out_replicator_swao: endpoint {
+						remote-endpoint =
+							<&replicator_swao_in_tmc_etf>;
+					};
+				};
+			};
+		};
+
+		replicator@10b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x10b06000 0x0 0x1000>;
+
+			qcom,replicator-loses-context;
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_swao_in_tmc_etf: endpoint {
+						remote-endpoint =
+							<&tmc_etf_out_replicator_swao>;
+					};
+				};
+			};
+
+			out-ports {
+
+				port {
+					replicator_swao_out_replicator_qdss: endpoint {
+						remote-endpoint =
+							<&replicator_qdss_in_replicator_swao>;
+					};
+				};
+			};
+		};
+
+		tpda@10b08000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+
+			reg = <0x0 0x10b08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					tpda_aoss_in_tpdm_swao_prio_0: endpoint {
+						remote-endpoint =
+							<&tpdm_swao_prio_0_out_tpda_aoss>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					tpda_aoss_in_tpdm_swao: endpoint {
+						remote-endpoint =
+							<&tpdm_swao_out_tpda_aoss>;
+					};
+				};
+			};
+
+			out-ports {
+
+				port {
+					tpda_aoss_out_funnel_aoss: endpoint {
+						remote-endpoint =
+							<&funnel_aoss_in_tpda_aoss>;
+					};
+				};
+			};
+		};
+
+		tpdm@10b09000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10b09000 0x0 0x1000>;
+
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_swao_prio_0_out_tpda_aoss: endpoint {
+						remote-endpoint =
+							<&tpda_aoss_in_tpdm_swao_prio_0>;
+					};
+				};
+			};
+		};
+
+		tpdm@10b0d000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10b0d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_swao_out_tpda_aoss: endpoint {
+						remote-endpoint =
+							<&tpda_aoss_in_tpdm_swao>;
+					};
+				};
+			};
+		};
+
+		tpdm@10c28000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10c28000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_dlct_out_tpda_dl_center_26: endpoint {
+						remote-endpoint =
+							<&tpda_dl_center_26_in_tpdm_dlct>;
+					};
+				};
+			};
+		};
+
+		tpdm@10c29000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x10c29000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_ipcc_out_tpda_dl_center_27: endpoint {
+						remote-endpoint =
+							<&tpda_dl_center_27_in_tpdm_ipcc>;
+					};
+				};
+			};
+		};
+
+		cti@10c2a000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x10c2a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@10c2b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x10c2b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpda@10c2e000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x10c2e000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1a {
+					reg = <26>;
+					tpda_dl_center_26_in_tpdm_dlct: endpoint {
+						remote-endpoint =
+							<&tpdm_dlct_out_tpda_dl_center_26>;
+					};
+				};
+
+				port@1b {
+					reg = <27>;
+					tpda_dl_center_27_in_tpdm_ipcc: endpoint {
+						remote-endpoint =
+							<&tpdm_ipcc_out_tpda_dl_center_27>;
+					};
+				};
+			};
+
+			out-ports {
+
+				port {
+					tpda_dl_center_out_funnel_dl_center: endpoint {
+						remote-endpoint =
+							<&funnel_dl_center_in_tpda_dl_center>;
+					};
+				};
+			};
+		};
+
+		funnel@10c2f000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x10c2f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+
+				port {
+					funnel_dl_center_in_tpda_dl_center: endpoint {
+						remote-endpoint =
+							<&tpda_dl_center_out_funnel_dl_center>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_dl_center_out_funnel_in1: endpoint {
+						remote-endpoint =
+							<&funnel_in1_in_funnel_dl_center>;
+					};
+				};
+			};
+		};
+
+		funnel@13810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x13810000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+
+				port {
+					funnel_apss_in_funnel_ete: endpoint {
+						remote-endpoint =
+							<&funnel_ete_out_funnel_apss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_apss_out_funnel_in1: endpoint {
+						remote-endpoint =
+							<&funnel_in1_in_funnel_apss>;
+					};
+				};
+			};
+		};
+
+		cti@138e0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x138e0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@138f0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x138f0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@13900000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x13900000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
 		sram@146aa000 {
 			compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
 			reg = <0 0x146aa000 0 0x1000>;
@@ -4557,6 +5383,8 @@
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <16>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x584 0x11>,
 				 <&apps_smmu 0x588 0x0>,
@@ -4621,13 +5449,10 @@
 			};
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sm8450-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
+		usb_1: usb@a600000 {
+			compatible = "qcom,sm8450-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4646,12 +5471,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -4665,33 +5492,32 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
+			iommus = <&apps_smmu 0x0 0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
+			usb-role-switch;
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+				port@0 {
+					reg = <0>;
 
-						usb_1_dwc3_hs: endpoint {
-						};
+					usb_1_dwc3_hs: endpoint {
 					};
+				};
 
-					port@1 {
-						reg = <1>;
+				port@1 {
+					reg = <1>;
 
-						usb_1_dwc3_ss: endpoint {
-							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
-						};
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 					};
 				};
 			};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso b/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso
new file mode 100644
index 000000000000..66bec0fef766
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SM8550-HDK Rear Camera Card overlay
+ *
+ * Copyright (c) 2025, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,sm8550-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+/plugin/;
+
+&camss {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@3 {
+			reg = <3>;
+
+			csiphy3_ep: endpoint {
+				clock-lanes = <4>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&cam_tele>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	sensor@10 {
+		compatible = "samsung,s5k3m5";
+		reg = <0x10>;
+		clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clock-rates = <24000000>;
+		reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&cam3_default>;
+		pinctrl-names = "default";
+		afvdd-supply = <&vreg_l7n_2p96>;
+		avdd-supply = <&vreg_l4m_2p8>;
+		dovdd-supply = <&vreg_l5n_1p8>;
+		dvdd-supply = <&vreg_l2m_1p056>;
+
+		port {
+			cam_tele: endpoint {
+				link-frequencies = /bits/ 64 <602500000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy3_ep>;
+			};
+		};
+	};
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 01c921602605..599850c48494 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -859,8 +859,8 @@
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -945,16 +945,20 @@
 	status = "okay";
 };
 
+&iris {
+	status = "okay";
+};
+
 &gpi_dma1 {
 	status = "okay";
 };
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/sm8550/a740_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8550/a740_zap.mbn";
 };
 
 &lpass_tlmm {
@@ -998,10 +1002,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1172,7 +1172,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index ab447fc252f7..f430038bd402 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -626,8 +626,8 @@
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -642,10 +642,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/sm8550/a740_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8550/a740_zap.mbn";
 };
 
 &i2c_master_hub_0 {
@@ -672,6 +672,10 @@
 	};
 };
 
+&iris {
+	status = "okay";
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio17";
@@ -734,10 +738,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -825,7 +825,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 6052dd922ec5..05c98fe2c25b 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -702,8 +702,8 @@
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -716,6 +716,52 @@
 	};
 };
 
+&camss {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	ports {
+		port@3 {
+			csiphy3_ep: endpoint {
+				clock-lanes = <4>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&cam_tele>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	sensor@10 {
+		compatible = "samsung,s5k3m5";
+		reg = <0x10>;
+		clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clock-rates = <24000000>;
+		reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&cam3_default>;
+		pinctrl-names = "default";
+		afvdd-supply = <&vreg_l7n_2p96>;
+		avdd-supply = <&vreg_l4m_2p8>;
+		dovdd-supply = <&vreg_l5n_1p8>;
+		dvdd-supply = <&vreg_l2m_1p056>;
+
+		port {
+			cam_tele: endpoint {
+				link-frequencies = /bits/ 64 <602500000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy3_ep>;
+			};
+		};
+	};
+};
+
 &i2c_master_hub_0 {
 	status = "okay";
 };
@@ -779,16 +825,20 @@
 	status = "okay";
 };
 
+&iris {
+	status = "okay";
+};
+
 &gpi_dma1 {
 	status = "okay";
 };
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/sm8550/a740_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8550/a740_zap.mbn";
 };
 
 &lpass_tlmm {
@@ -853,10 +903,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1005,7 +1051,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
index 3c5d8d26704f..b4ef40ae2cd9 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
@@ -487,8 +487,8 @@
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -547,25 +547,25 @@
 };
 
 &remoteproc_adsp {
-	firmware-name = "qcom/sm8550/adsp.mdt",
-			"qcom/sm8550/adsp_dtb.mdt";
+	firmware-name = "qcom/sm8550/adsp.mbn",
+			"qcom/sm8550/adsp_dtb.mbn";
 	status = "okay";
 };
 
 &remoteproc_cdsp {
-	firmware-name = "qcom/sm8550/cdsp.mdt",
-			"qcom/sm8550/cdsp_dtb.mdt";
+	firmware-name = "qcom/sm8550/cdsp.mbn",
+			"qcom/sm8550/cdsp_dtb.mbn";
 	status = "okay";
 };
 
 &remoteproc_mpss {
-	firmware-name = "qcom/sm8550/modem.mdt",
-			"qcom/sm8550/modem_dtb.mdt";
+	firmware-name = "qcom/sm8550/modem.mbn",
+			"qcom/sm8550/modem_dtb.mbn";
 	status = "okay";
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
index 85d487ef80a0..d90dc7b37c4a 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -722,7 +722,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index e7774d32fb6d..2ca9e50ef599 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2022, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/clock/qcom,sm8550-camcc.h>
@@ -14,6 +15,7 @@
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -330,7 +332,8 @@
 		scm: scm {
 			compatible = "qcom,scm-sm8550", "qcom,scm";
 			qcom,dload-mode = <&tcsr 0x19000>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 		};
 	};
 
@@ -346,6 +349,48 @@
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_125mhz: opp-table-qup125mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
 	memory@a0000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -354,22 +399,22 @@
 
 	pmu-a510 {
 		compatible = "arm,cortex-a510-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
 	};
 
 	pmu-a710 {
 		compatible = "arm,cortex-a710-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
 	};
 
 	pmu-a715 {
 		compatible = "arm,cortex-a715-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster2>;
 	};
 
 	pmu-x3 {
 		compatible = "arm,cortex-x3-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster3>;
 	};
 
 	psci {
@@ -797,7 +842,7 @@
 		ipcc: mailbox@408000 {
 			compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
 			reg = <0 0x00408000 0 0x1000>;
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#mbox-cells = <2>;
@@ -807,18 +852,18 @@
 			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x00800000 0 0x60000>;
-			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH 0>;
 			dma-channels = <12>;
 			dma-channel-mask = <0x3e>;
 			iommus = <&apps_smmu 0x436 0>;
@@ -846,16 +891,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c8_data_clk>;
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -864,16 +914,21 @@
 				reg = <0 0x00880000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -886,16 +941,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c9_data_clk>;
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -904,16 +964,21 @@
 				reg = <0 0x00884000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -926,16 +991,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c10_data_clk>;
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -944,16 +1014,21 @@
 				reg = <0 0x00888000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -966,16 +1041,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c11_data_clk>;
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -984,16 +1064,21 @@
 				reg = <0 0x0088c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1006,16 +1091,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c12_data_clk>;
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1024,16 +1114,21 @@
 				reg = <0 0x00890000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1046,16 +1141,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c13_data_clk>;
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1064,16 +1164,21 @@
 				reg = <0 0x00894000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1086,10 +1191,14 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
-				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_125mhz>;
 				status = "disabled";
 			};
 
@@ -1100,16 +1209,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c15_data_clk>;
-				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1118,16 +1232,21 @@
 				reg = <0 0x0089c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
-				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1152,12 +1271,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c0_data_clk>;
-				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1169,12 +1292,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c1_data_clk>;
-				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1186,12 +1313,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c2_data_clk>;
-				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1203,12 +1334,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c3_data_clk>;
-				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1220,12 +1355,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c4_data_clk>;
-				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1237,12 +1376,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c5_data_clk>;
-				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1254,12 +1397,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c6_data_clk>;
-				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1271,12 +1418,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c7_data_clk>;
-				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1288,12 +1439,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c8_data_clk>;
-				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
@@ -1305,12 +1460,16 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c9_data_clk>;
-				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 		};
@@ -1319,18 +1478,18 @@
 			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x00a00000 0 0x60000>;
-			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
 			dma-channels = <12>;
 			dma-channel-mask = <0x1e>;
 			iommus = <&apps_smmu 0xb6 0>;
@@ -1346,7 +1505,8 @@
 			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
 			iommus = <&apps_smmu 0xa3 0>;
-			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
 			interconnect-names = "qup-core";
 			dma-coherent;
 			#address-cells = <2>;
@@ -1360,16 +1520,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c0_data_clk>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1378,16 +1543,21 @@
 				reg = <0 0x00a80000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1400,16 +1570,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c1_data_clk>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				status = "disabled";
 			};
 
@@ -1418,16 +1593,21 @@
 				reg = <0 0x00a84000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1440,16 +1620,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c2_data_clk>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1458,16 +1643,21 @@
 				reg = <0 0x00a88000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1480,16 +1670,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c3_data_clk>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1498,16 +1693,21 @@
 				reg = <0 0x00a8c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1520,16 +1720,21 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c4_data_clk>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 
@@ -1538,16 +1743,21 @@
 				reg = <0 0x00a90000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1560,14 +1770,19 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c5_data_clk>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1578,16 +1793,21 @@
 				reg = <0 0x00a94000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1600,14 +1820,19 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c6_data_clk>;
-				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1618,16 +1843,21 @@
 				reg = <0 0x00a98000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
-				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1640,10 +1870,14 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_default>;
-				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH 0>;
 				interconnect-names = "qup-core", "qup-config";
-				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
-						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
 				status = "disabled";
 			};
 		};
@@ -1727,14 +1961,15 @@
 			linux,pci-domain = <0>;
 			num-lanes = <2>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1742,13 +1977,14 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1765,8 +2001,10 @@
 				      "ddrss_sf_tbu",
 				      "noc_aggr";
 
-			interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			msi-map = <0x0 &gic_its 0x1400 0x1>,
@@ -1782,8 +2020,62 @@
 			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
+			operating-points-v2 = <&pcie0_opp_table>;
+
 			status = "disabled";
 
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* 2.5 GT/s x1 */
+				opp-2500000-1 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+					opp-level = <1>;
+				};
+
+				/* 2.5 GT/s x2 */
+				opp-5000000-1 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <1>;
+				};
+
+				/* 5 GT/s x1 */
+				opp-5000000-2 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <2>;
+				};
+
+				/* 5 GT/s x2 */
+				opp-10000000-2 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+					opp-level = <2>;
+				};
+
+				/* 8 GT/s x1 */
+				opp-8000000-3 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+					opp-level = <3>;
+				};
+
+				/* 8 GT/s x2 */
+				opp-16000000-3 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+					opp-level = <3>;
+				};
+			};
+
 			pcieport0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -1843,14 +2135,15 @@
 			linux,pci-domain = <1>;
 			num-lanes = <2>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1858,13 +2151,14 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH 0>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -1886,8 +2180,10 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			msi-map = <0x0 &gic_its 0x1480 0x1>,
@@ -1904,8 +2200,78 @@
 			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
+			operating-points-v2 = <&pcie1_opp_table>;
+
 			status = "disabled";
 
+			pcie1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* 2.5 GT/s x1 */
+				opp-2500000-1 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+					opp-level = <1>;
+				};
+
+				/* 2.5 GT/s x2 */
+				opp-5000000-1 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <1>;
+				};
+
+				/* 5 GT/s x1 */
+				opp-5000000-2 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <2>;
+				};
+
+				/* 5 GT/s x2 */
+				opp-10000000-2 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+					opp-level = <2>;
+				};
+
+				/* 8 GT/s x1 */
+				opp-8000000-3 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+					opp-level = <3>;
+				};
+
+				/* 8 GT/s x2 */
+				opp-16000000-3 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+					opp-level = <3>;
+				};
+
+				/* 16 GT/s x1 */
+				opp-16000000-4 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+					opp-level = <4>;
+				};
+
+				/* 16 GT/s x2 */
+				opp-32000000-4 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+					opp-level = <4>;
+				};
+			};
+
 			pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -1949,9 +2315,11 @@
 		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0x0 0x01dc4000 0x0 0x28000>;
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
 			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x481 0x0>;
@@ -1964,7 +2332,8 @@
 			dma-names = "rx", "tx";
 			iommus = <&apps_smmu 0x480 0x0>,
 				 <&apps_smmu 0x481 0x0>;
-			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 			interconnect-names = "memory";
 		};
 
@@ -1993,7 +2362,7 @@
 			compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
@@ -2008,8 +2377,10 @@
 			dma-coherent;
 
 			operating-points-v2 = <&ufs_opp_table>;
-			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 			clock-names = "core_clk",
@@ -2104,7 +2475,7 @@
 				    "cx_mem",
 				    "cx_dbgc";
 
-			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			iommus = <&adreno_smmu 0 0x0>,
 				 <&adreno_smmu 1 0x0>;
@@ -2114,9 +2485,13 @@
 			qcom,gmu = <&gmu>;
 			#cooling-cells = <2>;
 
+			interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "gfx-mem";
+
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&gpu_micro_code_mem>;
 			};
 
@@ -2127,41 +2502,49 @@
 				opp-680000000 {
 					opp-hz = /bits/ 64 <680000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <16500000>;
 				};
 
 				opp-615000000 {
 					opp-hz = /bits/ 64 <615000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					opp-peak-kBps = <12449218>;
 				};
 
 				opp-550000000 {
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <10687500>;
 				};
 
 				opp-475000000 {
 					opp-hz = /bits/ 64 <475000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					opp-peak-kBps = <6074218>;
 				};
 
 				opp-401000000 {
 					opp-hz = /bits/ 64 <401000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <6074218>;
 				};
 
 				opp-348000000 {
 					opp-hz = /bits/ 64 <348000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					opp-peak-kBps = <6074218>;
 				};
 
 				opp-295000000 {
 					opp-hz = /bits/ 64 <295000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					opp-peak-kBps = <6074218>;
 				};
 
 				opp-220000000 {
 					opp-hz = /bits/ 64 <220000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					opp-peak-kBps = <2136718>;
 				};
 			};
 		};
@@ -2173,8 +2556,8 @@
 			      <0x0 0x0b280000 0x0 0x10000>;
 			reg-names = "gmu", "rscc", "gmu_pdc";
 
-			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "hfi", "gmu";
 
 			clocks = <&gpucc GPU_CC_AHB_CLK>,
@@ -2235,32 +2618,32 @@
 			reg = <0x0 0x03da0000 0x0 0x40000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
 				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
@@ -2285,8 +2668,8 @@
 				    "ipa-shared",
 				    "gsi";
 
-			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
-					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING 0>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH 0>,
 					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ipa",
@@ -2297,8 +2680,10 @@
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnects = <&aggre2_noc MASTER_IPA QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IPA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "memory",
 					     "config";
 
@@ -2314,9 +2699,9 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
-			reg = <0x0 0x04080000 0x0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING 0>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2332,7 +2717,8 @@
 					<&rpmhpd RPMHPD_MSS>;
 			power-domain-names = "cx", "mss";
 
-			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 
 			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
 
@@ -2354,6 +2740,138 @@
 			};
 		};
 
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,sm8550-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1063 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1064 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1065 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1066 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x80>,
+							 <&apps_smmu 0x1067 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
 		lpass_wsa2macro: codec@6aa0000 {
 			compatible = "qcom,sm8550-lpass-wsa-macro";
 			reg = <0 0x06aa0000 0 0x1000>;
@@ -2371,7 +2889,7 @@
 		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
-			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_wsa2macro>;
 			clock-names = "iface";
 			label = "WSA2";
@@ -2415,7 +2933,7 @@
 		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_rxmacro>;
 			clock-names = "iface";
 			label = "RX";
@@ -2473,7 +2991,7 @@
 		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_wsamacro>;
 			clock-names = "iface";
 			label = "WSA";
@@ -2503,8 +3021,8 @@
 		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
-			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "core", "wakeup";
 			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
@@ -2686,8 +3204,8 @@
 			compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
 
-			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
@@ -2700,10 +3218,13 @@
 			power-domains = <&rpmhpd RPMHPD_CX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 
-			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "sdhc-ddr", "cpu-sdhc";
 			bus-width = <4>;
+			max-sd-hs-hz = <37500000>;
 			dma-coherent;
 
 			/* Forbid SDR104/SDR50 - broken hw! */
@@ -2736,13 +3257,96 @@
 			};
 		};
 
+		iris: video-codec@aa00000 {
+			compatible = "qcom,sm8550-iris";
+
+			reg = <0 0x0aa00000 0 0xf0000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+			reset-names = "bus";
+
+			iommus = <&apps_smmu 0x1940 0>,
+				 <&apps_smmu 0x1947 0>;
+			dma-coherent;
+
+			/*
+			 * IRIS firmware is signed by vendors, only
+			 * enable on boards where the proper signed firmware
+			 * is available.
+			 */
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-338000000 {
+					opp-hz = /bits/ 64 <338000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-533333334 {
+					opp-hz = /bits/ 64 <533333334>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,sm8550-videocc";
 			reg = <0 0x0aaf0000 0 0x10000>;
 			clocks = <&bi_tcxo_div2>,
 				 <&gcc GCC_VIDEO_AHB_CLK>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -2751,7 +3355,7 @@
 		cci0: cci@ac15000 {
 			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac15000 0 0x1000>;
-			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -2784,7 +3388,7 @@
 		cci1: cci@ac16000 {
 			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac16000 0 0x1000>;
-			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -2810,7 +3414,7 @@
 		cci2: cci@ac17000 {
 			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac17000 0 0x1000>;
-			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -2840,6 +3444,216 @@
 			};
 		};
 
+		camss: isp@acb7000 {
+			compatible = "qcom,sm8550-camss";
+
+			reg = <0x0 0x0acb7000 0x0 0x0d00>,
+			      <0x0 0x0acb9000 0x0 0x0d00>,
+			      <0x0 0x0acbb000 0x0 0x0d00>,
+			      <0x0 0x0acca000 0x0 0x0a00>,
+			      <0x0 0x0acce000 0x0 0x0a00>,
+			      <0x0 0x0acb6000 0x0 0x1000>,
+			      <0x0 0x0ace4000 0x0 0x2000>,
+			      <0x0 0x0ace6000 0x0 0x2000>,
+			      <0x0 0x0ace8000 0x0 0x2000>,
+			      <0x0 0x0acea000 0x0 0x2000>,
+			      <0x0 0x0acec000 0x0 0x2000>,
+			      <0x0 0x0acee000 0x0 0x2000>,
+			      <0x0 0x0acf0000 0x0 0x2000>,
+			      <0x0 0x0acf2000 0x0 0x2000>,
+			      <0x0 0x0ac62000 0x0 0xf000>,
+			      <0x0 0x0ac71000 0x0 0xf000>,
+			      <0x0 0x0ac80000 0x0 0xf000>,
+			      <0x0 0x0accb000 0x0 0x1800>,
+			      <0x0 0x0accf000 0x0 0x1800>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid_lite0",
+				    "csid_lite1",
+				    "csid_wrapper",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "csiphy4",
+				    "csiphy5",
+				    "csiphy6",
+				    "csiphy7",
+				    "vfe0",
+				    "vfe1",
+				    "vfe2",
+				    "vfe_lite0",
+				    "vfe_lite1";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_2_CLK>,
+				 <&camcc CAM_CC_CSID_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY5_CLK>,
+				 <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY6_CLK>,
+				 <&camcc CAM_CC_CSI6PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY7_CLK>,
+				 <&camcc CAM_CC_CSI7PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_2_CLK>,
+				 <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cpas_fast_ahb_clk",
+				      "cpas_ife_lite",
+				      "cpas_vfe0",
+				      "cpas_vfe1",
+				      "cpas_vfe2",
+				      "csid",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy4",
+				      "csiphy4_timer",
+				      "csiphy5",
+				      "csiphy5_timer",
+				      "csiphy6",
+				      "csiphy6_timer",
+				      "csiphy7",
+				      "csiphy7_timer",
+				      "csiphy_rx",
+				      "gcc_axi_hf",
+				      "vfe0",
+				      "vfe0_fast_ahb",
+				      "vfe1",
+				      "vfe1_fast_ahb",
+				      "vfe2",
+				      "vfe2_fast_ahb",
+				      "vfe_lite",
+				      "vfe_lite_ahb",
+				      "vfe_lite_cphy_rx",
+				      "vfe_lite_csid";
+
+			interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 603 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 431 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 605 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 376 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 122 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 89 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 278 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 277 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 602 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 688 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 606 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 377 IRQ_TYPE_EDGE_RISING 0>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "csiphy4",
+					  "csiphy5",
+					  "csiphy6",
+					  "csiphy7",
+					  "vfe0",
+					  "vfe1",
+					  "vfe2",
+					  "vfe_lite0",
+					  "vfe_lite1";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ahb",
+					     "hf_0_mnoc";
+
+			iommus = <&apps_smmu 0x800 0x20>;
+
+			power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+					<&camcc CAM_CC_IFE_1_GDSC>,
+					<&camcc CAM_CC_IFE_2_GDSC>,
+					<&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "ife2",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+
+				port@5 {
+					reg = <5>;
+				};
+
+				port@6 {
+					reg = <6>;
+				};
+
+				port@7 {
+					reg = <7>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,sm8550-camcc";
 			reg = <0 0x0ade0000 0 0x20000>;
@@ -2847,8 +3661,10 @@
 				 <&bi_tcxo_div2>,
 				 <&bi_tcxo_ao_div2>,
 				 <&sleep_clk>;
-			power-domains = <&rpmhpd SM8550_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -2859,7 +3675,7 @@
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
@@ -2872,9 +3688,11 @@
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
-			interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
-					<&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem", "mdp1-mem";
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem", "cpu-cfg";
 
 			iommus = <&apps_smmu 0x1c00 0x2>;
 
@@ -2887,7 +3705,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8550-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp", "vbif";
 
 				interrupt-parent = <&mdss>;
@@ -2977,16 +3795,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3013,6 +3835,7 @@
 					port@1 {
 						reg = <1>;
 						mdss_dp0_out: endpoint {
+							data-lanes = <0 1 2 3>;
 							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 						};
 					};
@@ -3068,8 +3891,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -3163,8 +3986,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -3222,10 +4045,10 @@
 				 <&bi_tcxo_ao_div2>,
 				 <&gcc GCC_DISP_AHB_CLK>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
@@ -3273,6 +4096,7 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			mode-switch;
 			orientation-switch;
 
 			status = "disabled";
@@ -3306,12 +4130,11 @@
 			};
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
-			reg = <0x0 0x0a6f8800 0x0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1: usb@a600000 {
+			compatible = "qcom,sm8550-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -3330,12 +4153,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3346,51 +4171,52 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			status = "disabled";
+			iommus = <&apps_smmu 0x40 0x0>;
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x0a600000 0x0 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x40 0x0>;
-				phys = <&usb_1_hsphy>,
-				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,hird-threshold = /bits/ 8 <0x0>;
-				snps,usb2-gadget-lpm-disable;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				snps,is-utmi-l1-suspend;
-				snps,usb3_lpm_capable;
-				snps,usb2-lpm-disable;
-				snps,has-lpm-erratum;
-				tx-fifo-resize;
-				dma-coherent;
-				usb-role-switch;
+			phys = <&usb_1_hsphy>,
+			       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,usb2-gadget-lpm-disable;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,usb3_lpm_capable;
+			snps,usb2-lpm-disable;
+			snps,has-lpm-erratum;
+			tx-fifo-resize;
 
-					port@0 {
-						reg = <0>;
+			dma-coherent;
 
-						usb_1_dwc3_hs: endpoint {
-						};
+			usb-role-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_dwc3_hs: endpoint {
 					};
+				};
 
-					port@1 {
-						reg = <1>;
+				port@1 {
+					reg = <1>;
 
-						usb_1_dwc3_ss: endpoint {
-							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-						};
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 					};
 				};
 			};
@@ -3412,8 +4238,8 @@
 			reg = <0 0x0c271000 0 0x1000>, /* TM */
 			      <0 0x0c222000 0 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -3423,8 +4249,8 @@
 			reg = <0 0x0c272000 0 0x1000>, /* TM */
 			      <0 0x0c223000 0 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -3434,8 +4260,8 @@
 			reg = <0 0x0c273000 0 0x1000>, /* TM */
 			      <0 0x0c224000 0 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -3454,6 +4280,7 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c400000 {
@@ -3478,7 +4305,7 @@
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,sm8550-tlmm";
 			reg = <0 0x0f100000 0 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -3486,6 +4313,150 @@
 			gpio-ranges = <&tlmm 0 0 211>;
 			wakeup-parent = <&pdc>;
 
+			cam0_default: cam0-default-state {
+				mclk-pins {
+					pins = "gpio100";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cam0_sleep: cam0-sleep-state {
+				mclk-pins {
+					pins = "gpio100";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cam1_default: cam1-default-state {
+				mclk-pins {
+					pins = "gpio101";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cam1_sleep: cam1-sleep-state {
+				mclk-pins {
+					pins = "gpio101";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cam2_default: cam2-default-state {
+				mclk-pins {
+					pins = "gpio102";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cam2_sleep: cam2-sleep-state {
+				mclk-pins {
+					pins = "gpio102";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cam3_default: cam3-default-state {
+				mclk-pins {
+					pins = "gpio103";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cam3_sleep: cam3-sleep-state {
+				mclk-pins {
+					pins = "gpio103";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cam4_default: cam4-default-state {
+				mclk-pins {
+					pins = "gpio104";
+					function = "cam_aon_mclk4";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cam4_sleep: cam4-sleep-state {
+				mclk-pins {
+					pins = "gpio104";
+					function = "cam_aon_mclk4";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cam5_default: cam5-default-state {
+				mclk-pins {
+					pins = "gpio105";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cam5_sleep: cam5-sleep-state {
+				mclk-pins {
+					pins = "gpio105";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cam6_default: cam6-default-state {
+				mclk-pins {
+					pins = "gpio106";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cam6_sleep: cam6-sleep-state {
+				mclk-pins {
+					pins = "gpio106";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cam7_default: cam7-default-state {
+				mclk-pins {
+					pins = "gpio107";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cam7_sleep: cam7-sleep-state {
+				mclk-pins {
+					pins = "gpio107";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
 			cci0_0_default: cci0-0-default-state {
 				sda-pins {
 					pins = "gpio110";
@@ -4172,103 +5143,103 @@
 			reg = <0 0x15000000 0 0x100000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH 0>;
 			dma-coherent;
 		};
 
@@ -4277,14 +5248,32 @@
 			reg = <0 0x17100000 0 0x10000>,		/* GICD */
 			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
 			ranges;
-			#interrupt-cells = <3>;
+			#interrupt-cells = <4>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
 			redistributor-stride = <0 0x40000>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu3 &cpu4>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu5 &cpu6>;
+				};
+
+				ppi_cluster3: interrupt-partition-3 {
+					affinity = <&cpu7>;
+				};
+			};
+
 			gic_its: msi-controller@17140000 {
 				compatible = "arm,gic-v3-its";
 				reg = <0 0x17140000 0 0x20000>;
@@ -4304,49 +5293,49 @@
 				reg = <0x17421000 0x1000>,
 				      <0x17422000 0x1000>;
 				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			frame@17423000 {
 				reg = <0x17423000 0x1000>;
 				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@17425000 {
 				reg = <0x17425000 0x1000>;
 				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@17427000 {
 				reg = <0x17427000 0x1000>;
 				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@17429000 {
 				reg = <0x17429000 0x1000>;
 				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@1742b000 {
 				reg = <0x1742b000 0x1000>;
 				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@1742d000 {
 				reg = <0x1742d000 0x1000>;
 				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 		};
@@ -4359,9 +5348,9 @@
 			      <0 0x17a20000 0 0x10000>,
 			      <0 0x17a30000 0 0x10000>;
 			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>;
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
@@ -4458,9 +5447,9 @@
 			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
 			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
@@ -4469,8 +5458,9 @@
 		pmu@24091000 {
 			compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
 			reg = <0 0x24091000 0 0x1000>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			operating-points-v2 = <&llcc_bwmon_opp_table>;
 
@@ -4518,8 +5508,9 @@
 		pmu@240b6400 {
 			compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x240b6400 0 0x600>;
-			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH 0>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
 
 			operating-points-v2 = <&cpu_bwmon_opp_table>;
 
@@ -4573,138 +5564,7 @@
 				    "llcc3_base",
 				    "llcc_broadcast_base",
 				    "llcc_broadcast_and_base";
-			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8550-adsp-pas";
-			reg = <0x0 0x30000000 0x0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
-
-			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1003 0x80>,
-							 <&apps_smmu 0x1063 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1004 0x80>,
-							 <&apps_smmu 0x1064 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1005 0x80>,
-							 <&apps_smmu 0x1065 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-						iommus = <&apps_smmu 0x1006 0x80>,
-							 <&apps_smmu 0x1066 0x0>;
-						dma-coherent;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-						iommus = <&apps_smmu 0x1007 0x80>,
-							 <&apps_smmu 0x1067 0x0>;
-						dma-coherent;
-					};
-				};
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1001 0x80>,
-								 <&apps_smmu 0x1061 0x0>;
-						};
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-			};
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
 		nsp_noc: interconnect@320c0000 {
@@ -4716,9 +5576,9 @@
 
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8550-cdsp-pas";
-			reg = <0x0 0x32300000 0x0 0x1400000>;
+			reg = <0x0 0x32300000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING 0>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -4734,7 +5594,8 @@
 					<&rpmhpd RPMHPD_NSP>;
 			power-domain-names = "cx", "mxc", "nsp";
 
-			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 
 			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
 
@@ -5899,9 +6760,9 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
index cb102535838d..5a594d7311a7 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
+++ b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
@@ -60,19 +60,10 @@
 			};
 		};
 	};
+};
 
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			mdss_dsi0_out: endpoint {
-				remote-endpoint = <&panel0_in>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
 };
 
 &spi4 {
diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
index f00bdff4280a..5bf1af3308ce 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
@@ -894,12 +894,16 @@
 	status = "okay";
 };
 
+&iris {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/sm8650/gen70900_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8650/gen70900_zap.mbn";
 };
 
 &lpass_tlmm {
@@ -937,10 +941,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1046,10 +1046,6 @@
 	vdd3-supply = <&vreg_l5b_3p1>;
 };
 
-&pmk8550_rtc {
-	status = "okay";
-};
-
 &pon_pwrkey {
 	status = "okay";
 };
@@ -1113,7 +1109,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
@@ -1306,12 +1302,10 @@
  */
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
index 0db2cb03f252..c67bbace2743 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -585,6 +585,10 @@
 	};
 };
 
+&iris {
+	status = "okay";
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio21";
@@ -730,7 +734,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &swr0 {
@@ -853,12 +857,10 @@
  */
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
index c5e8c3c2df91..b2feac61a89f 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -824,12 +824,16 @@
 	status = "okay";
 };
 
+&iris {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/sm8650/gen70900_zap.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8650/gen70900_zap.mbn";
 };
 
 &lpass_tlmm {
@@ -888,10 +892,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1002,10 +1002,6 @@
 	vdd3-supply = <&vreg_l5b_3p1>;
 };
 
-&pmk8550_rtc {
-	status = "okay";
-};
-
 &qup_i2c3_data_clk {
 	/* Use internal I2C pull-up */
 	bias-pull-up = <2200>;
@@ -1041,7 +1037,7 @@
 };
 
 &sleep_clk {
-	clock-frequency = <32000>;
+	clock-frequency = <32764>;
 };
 
 &spi4 {
@@ -1289,12 +1285,10 @@
  */
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 25e47505adcb..07ae74851621 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2023, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8650-camcc.h>
 #include <dt-bindings/clock/qcom,sm8650-dispcc.h>
@@ -15,6 +16,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
@@ -85,6 +87,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 0>;
 
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_0: l2-cache {
@@ -118,6 +129,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 0>;
 
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 		};
 
@@ -138,6 +158,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 3>;
 
+			operating-points-v2 = <&cpu2_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_200: l2-cache {
@@ -159,13 +188,29 @@
 			power-domain-names = "psci";
 
 			enable-method = "psci";
-			next-level-cache = <&l2_200>;
+			next-level-cache = <&l2_300>;
 			capacity-dmips-mhz = <1792>;
 			dynamic-power-coefficient = <238>;
 
 			qcom,freq-domain = <&cpufreq_hw 3>;
 
+			operating-points-v2 = <&cpu2_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
+
+			l2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
 		};
 
 		cpu4: cpu@400 {
@@ -185,6 +230,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 3>;
 
+			operating-points-v2 = <&cpu2_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_400: l2-cache {
@@ -212,6 +266,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 1>;
 
+			operating-points-v2 = <&cpu5_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_500: l2-cache {
@@ -239,6 +302,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 1>;
 
+			operating-points-v2 = <&cpu5_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_600: l2-cache {
@@ -266,6 +338,15 @@
 
 			qcom,freq-domain = <&cpufreq_hw 2>;
 
+			operating-points-v2 = <&cpu7_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3 MASTER_EPSS_L3_APPS
+					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
+
 			#cooling-cells = <2>;
 
 			l2_700: l2-cache {
@@ -365,6 +446,199 @@
 		};
 	};
 
+	ete-0 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu0>;
+
+		out-ports {
+			port {
+				ete0_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete0>;
+				};
+			};
+		};
+	};
+
+	ete-1 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu1>;
+
+		out-ports {
+			port {
+				ete1_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete1>;
+				};
+			};
+		};
+	};
+
+	ete-2 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu2>;
+
+		out-ports {
+			port {
+				ete2_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete2>;
+				};
+			};
+		};
+	};
+
+	ete-3 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu3>;
+
+		out-ports {
+			port {
+				ete3_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete3>;
+				};
+			};
+		};
+	};
+
+	ete-4 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu4>;
+
+		out-ports {
+			port {
+				ete4_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete4>;
+				};
+			};
+		};
+	};
+
+	ete-5 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu5>;
+
+		out-ports {
+			port {
+				ete5_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete5>;
+				};
+			};
+		};
+	};
+
+	ete-6 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu6>;
+
+		out-ports {
+			port {
+				ete6_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete6>;
+				};
+			};
+		};
+	};
+
+	ete-7 {
+		compatible = "arm,embedded-trace-extension";
+
+		cpu = <&cpu7>;
+
+		out-ports {
+			port {
+				ete7_out_funnel_ete: endpoint {
+					remote-endpoint = <&funnel_ete_in_ete7>;
+				};
+			};
+		};
+	};
+
+	funnel-ete {
+		compatible = "arm,coresight-static-funnel";
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				funnel_ete_in_ete0: endpoint {
+					remote-endpoint = <&ete0_out_funnel_ete>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				funnel_ete_in_ete1: endpoint {
+					remote-endpoint = <&ete1_out_funnel_ete>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				funnel_ete_in_ete2: endpoint {
+					remote-endpoint = <&ete2_out_funnel_ete>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				funnel_ete_in_ete3: endpoint {
+					remote-endpoint = <&ete3_out_funnel_ete>;
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+
+				funnel_ete_in_ete4: endpoint {
+					remote-endpoint = <&ete4_out_funnel_ete>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+
+				funnel_ete_in_ete5: endpoint {
+					remote-endpoint = <&ete5_out_funnel_ete>;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+
+				funnel_ete_in_ete6: endpoint {
+					remote-endpoint = <&ete6_out_funnel_ete>;
+				};
+			};
+
+			port@7 {
+				reg = <7>;
+
+				funnel_ete_in_ete7: endpoint {
+					remote-endpoint = <&ete7_out_funnel_ete>;
+				};
+			};
+		};
+
+		out-ports {
+			port {
+				funnel_ete_out_funnel_apss: endpoint {
+					remote-endpoint = <&funnel_apss_in_funnel_ete>;
+				};
+			};
+		};
+	};
+
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8650", "qcom,scm";
@@ -386,25 +660,941 @@
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_128mhz: opp-table-qup128mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_240mhz: opp-table-qup240mhz {
+		compatible = "operating-points-v2";
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
 	memory@a0000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
 		reg = <0 0xa0000000 0 0>;
 	};
 
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-364800000 {
+			opp-hz = /bits/ 64 <364800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (384000 * 32)>;
+		};
+
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-672000000 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (729600 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (844800 * 32)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(466000 * 16) (547000 * 4) (940800 * 32)>;
+		};
+
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <(466000 * 16) (547000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1132800 * 32)>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1555200 * 32)>;
+		};
+
+		opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1555200 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1651200 * 32)>;
+		};
+
+		opp-1939200000 {
+			opp-hz = /bits/ 64 <1939200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2265600000 {
+			opp-hz = /bits/ 64 <2265600000>;
+			opp-peak-kBps = <(600000 * 16) (1555000 * 4) (2035200 * 32)>;
+		};
+	};
+
+	cpu2_opp_table: opp-table-cpu2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (844800 * 32)>;
+		};
+
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2304000000 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2515200000 {
+			opp-hz = /bits/ 64 <2515200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2572800000 {
+			opp-hz = /bits/ 64 <2572800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2630400000 {
+			opp-hz = /bits/ 64 <2630400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2707200000 {
+			opp-hz = /bits/ 64 <2707200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2764800000 {
+			opp-hz = /bits/ 64 <2764800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2899200000 {
+			opp-hz = /bits/ 64 <2899200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2956800000 {
+			opp-hz = /bits/ 64 <2956800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3014400000 {
+			opp-hz = /bits/ 64 <3014400000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3072000000 {
+			opp-hz = /bits/ 64 <3072000000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3148800000 {
+			opp-hz = /bits/ 64 <3148800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
+	};
+
+	cpu5_opp_table: opp-table-cpu5 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (844800 * 32)>;
+		};
+
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1440000 * 32)>;
+		};
+
+		opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2304000000 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2515200000 {
+			opp-hz = /bits/ 64 <2515200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2572800000 {
+			opp-hz = /bits/ 64 <2572800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2630400000 {
+			opp-hz = /bits/ 64 <2630400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2707200000 {
+			opp-hz = /bits/ 64 <2707200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2764800000 {
+			opp-hz = /bits/ 64 <2764800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2899200000 {
+			opp-hz = /bits/ 64 <2899200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2956800000 {
+			opp-hz = /bits/ 64 <2956800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3014400000 {
+			opp-hz = /bits/ 64 <3014400000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3072000000 {
+			opp-hz = /bits/ 64 <3072000000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3148800000 {
+			opp-hz = /bits/ 64 <3148800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
+	};
+
+	cpu7_opp_table: opp-table-cpu7 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (307200 * 32)>;
+		};
+
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <(300000 * 16) (547000 * 4) (499200 * 32)>;
+		};
+
+		opp-672000000 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(466000 * 16) (768000 * 4) (499200 * 32)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (844800 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(466000 * 16) (1555000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1036800 * 32)>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <(600000 * 16) (2092000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(806000 * 16) (2736000 * 4) (1248000 * 32)>;
+		};
+
+		opp-1939200000 {
+			opp-hz = /bits/ 64 <1939200000>;
+			opp-peak-kBps = <(806000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2304000000 {
+			opp-hz = /bits/ 64 <2304000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2496000000 {
+			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1440000 * 32)>;
+		};
+
+		opp-2630400000 {
+			opp-hz = /bits/ 64 <2630400000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2688000000 {
+			opp-hz = /bits/ 64 <2688000000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1651200 * 32)>;
+		};
+
+		opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <(933000 * 16) (3686000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2803200000 {
+			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2880000000 {
+			opp-hz = /bits/ 64 <2880000000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2937600000 {
+			opp-hz = /bits/ 64 <2937600000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-2995200000 {
+			opp-hz = /bits/ 64 <2995200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3052800000 {
+			opp-hz = /bits/ 64 <3052800000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (1843200 * 32)>;
+		};
+
+		opp-3187200000 {
+			opp-hz = /bits/ 64 <3187200000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
+
+		opp-3302400000 {
+			opp-hz = /bits/ 64 <3302400000>;
+			opp-peak-kBps = <(1066000 * 16) (4224000 * 4) (2035200 * 32)>;
+		};
+	};
+
 	pmu-a520 {
 		compatible = "arm,cortex-a520-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
 	};
 
 	pmu-a720 {
 		compatible = "arm,cortex-a720-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
 	};
 
 	pmu-x4 {
 		compatible = "arm,cortex-x4-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster2>;
 	};
 
 	psci {
@@ -426,7 +1616,7 @@
 		cpu_pd2: power-domain-cpu2 {
 			#power-domain-cells = <0>;
 			power-domains = <&cluster_pd>;
-			domain-idle-states = <&silver_cpu_sleep_0>;
+			domain-idle-states = <&gold_cpu_sleep_0>;
 		};
 
 		cpu_pd3: power-domain-cpu3 {
@@ -782,7 +1972,7 @@
 			compatible = "qcom,sm8650-ipcc", "qcom,ipcc";
 			reg = <0 0x00406000 0 0x1000>;
 
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
@@ -793,18 +1983,18 @@
 			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00800000 0 0x60000>;
 
-			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			dma-channels = <12>;
 			dma-channel-mask = <0x3f>;
@@ -840,21 +2030,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00880000 0 0x4000>;
 
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -873,21 +2067,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00880000 0 0x4000>;
 
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -906,21 +2104,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00884000 0 0x4000>;
 
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -939,21 +2141,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00884000 0 0x4000>;
 
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -972,21 +2178,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00888000 0 0x4000>;
 
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1005,21 +2215,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00888000 0 0x4000>;
 
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1038,21 +2252,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0088c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1071,21 +2289,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x0088c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1104,21 +2326,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00890000 0 0x4000>;
 
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1137,21 +2363,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00890000 0 0x4000>;
 
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1170,21 +2400,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00894000 0 0x4000>;
 
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1203,21 +2437,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00894000 0 0x4000>;
 
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1236,18 +2474,22 @@
 				compatible = "qcom,geni-uart";
 				reg = <0 0x00898000 0 0x4000>;
 
-				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_128mhz>;
+
 				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
 				pinctrl-names = "default";
 
@@ -1258,18 +2500,22 @@
 				compatible = "qcom,geni-debug-uart";
 				reg = <0 0x0089c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				pinctrl-0 = <&qup_uart15_default>;
 				pinctrl-names = "default";
 
@@ -1294,7 +2540,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00980000 0 0x4000>;
 
-				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1303,11 +2549,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c0_data_clk>;
 				pinctrl-names = "default";
 
@@ -1321,7 +2571,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00984000 0 0x4000>;
 
-				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1330,11 +2580,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c1_data_clk>;
 				pinctrl-names = "default";
 
@@ -1348,7 +2602,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00988000 0 0x4000>;
 
-				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1357,11 +2611,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c2_data_clk>;
 				pinctrl-names = "default";
 
@@ -1375,7 +2633,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x0098c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1384,11 +2642,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c3_data_clk>;
 				pinctrl-names = "default";
 
@@ -1402,7 +2664,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00990000 0 0x4000>;
 
-				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1411,11 +2673,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c4_data_clk>;
 				pinctrl-names = "default";
 
@@ -1429,7 +2695,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00994000 0 0x4000>;
 
-				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1438,11 +2704,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c5_data_clk>;
 				pinctrl-names = "default";
 
@@ -1456,7 +2726,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x00998000 0 0x4000>;
 
-				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1465,11 +2735,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c6_data_clk>;
 				pinctrl-names = "default";
 
@@ -1483,7 +2757,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x0099c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1492,11 +2766,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c7_data_clk>;
 				pinctrl-names = "default";
 
@@ -1510,7 +2788,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x009a0000 0 0x4000>;
 
-				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1519,11 +2797,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c8_data_clk>;
 				pinctrl-names = "default";
 
@@ -1537,7 +2819,7 @@
 				compatible = "qcom,geni-i2c-master-hub";
 				reg = <0 0x009a4000 0 0x4000>;
 
-				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
@@ -1546,11 +2828,15 @@
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ACTIVE_ONLY>;
 				interconnect-names = "qup-core",
 						     "qup-config";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				required-opps = <&rpmhpd_opp_low_svs>;
+
 				pinctrl-0 = <&hub_i2c9_data_clk>;
 				pinctrl-names = "default";
 
@@ -1565,18 +2851,18 @@
 			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00a00000 0 0x60000>;
 
-			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			dma-channels = <12>;
 			dma-channel-mask = <0xc>;
@@ -1615,21 +2901,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a80000 0 0x4000>;
 
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1648,21 +2938,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a80000 0 0x4000>;
 
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1681,21 +2975,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a84000 0 0x4000>;
 
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1714,21 +3012,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a84000 0 0x4000>;
 
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1747,21 +3049,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a88000 0 0x4000>;
 
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_240mhz>;
+
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1780,21 +3086,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a88000 0 0x4000>;
 
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_240mhz>;
+
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1813,21 +3123,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a8c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1846,21 +3160,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a8c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1879,21 +3197,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a90000 0 0x4000>;
 
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1912,21 +3234,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a90000 0 0x4000>;
 
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -1945,21 +3271,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a94000 0 0x4000>;
 
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1978,21 +3308,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a94000 0 0x4000>;
 
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2011,21 +3345,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a98000 0 0x4000>;
 
-				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2044,21 +3382,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a98000 0 0x4000>;
 
-				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+
 				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2077,21 +3419,25 @@
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a9c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -2110,21 +3456,25 @@
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00a9c000 0 0x4000>;
 
-				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
 				clock-names = "se";
 
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
-						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
 						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
 						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 				interconnect-names = "qup-core",
 						     "qup-config",
 						     "qup-memory";
 
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+
 				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
 				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -2140,6 +3490,11 @@
 			};
 		};
 
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8650-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
 		cnoc_main: interconnect@1500000 {
 			compatible = "qcom,sm8650-cnoc-main";
 			reg = <0 0x01500000 0 0x14080>;
@@ -2211,11 +3566,6 @@
 			#interconnect-cells = <2>;
 		};
 
-		rng: rng@10c3000 {
-			compatible = "qcom,sm8650-trng", "qcom,trng";
-			reg = <0 0x010c3000 0 0x1000>;
-		};
-
 		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
@@ -2226,14 +3576,15 @@
 			      <0 0x60100000 0 0x100000>;
 			reg-names = "parf", "dbi", "elbi", "atu", "config";
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -2241,7 +3592,8 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -2265,20 +3617,22 @@
 
 			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
+			operating-points-v2 = <&pcie0_opp_table>;
+
 			iommu-map = <0     &apps_smmu 0x1400 0x1>,
 				    <0x100 &apps_smmu 0x1401 0x1>;
 
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			#interrupt-cells = <1>;
 
@@ -2302,6 +3656,58 @@
 
 			status = "disabled";
 
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* 2.5 GT/s x1 */
+				opp-2500000-1 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+					opp-level = <1>;
+				};
+
+				/* 2.5 GT/s x2 */
+				opp-5000000-1 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <1>;
+				};
+
+				/* 5 GT/s x1 */
+				opp-5000000-2 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <2>;
+				};
+
+				/* 5 GT/s x2 */
+				opp-10000000-2 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+					opp-level = <2>;
+				};
+
+				/* 8 GT/s x1 */
+				opp-8000000-3 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+					opp-level = <3>;
+				};
+
+				/* 8 GT/s x2 */
+				opp-16000000-3 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+					opp-level = <3>;
+				};
+			};
+
 			pcieport0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -2358,14 +3764,15 @@
 				    "atu",
 				    "config";
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -2373,7 +3780,8 @@
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2402,20 +3810,22 @@
 
 			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "pcie-mem",
 					     "cpu-pcie";
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
+			operating-points-v2 = <&pcie1_opp_table>;
+
 			iommu-map = <0     &apps_smmu 0x1480 0x1>,
 				    <0x100 &apps_smmu 0x1481 0x1>;
 
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			#interrupt-cells = <1>;
 
@@ -2439,6 +3849,74 @@
 
 			status = "disabled";
 
+			pcie1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* 2.5 GT/s x1 */
+				opp-2500000-1 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+					opp-level = <1>;
+				};
+
+				/* 2.5 GT/s x2 */
+				opp-5000000-1 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <1>;
+				};
+
+				/* 5 GT/s x1 */
+				opp-5000000-2 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+					opp-level = <2>;
+				};
+
+				/* 5 GT/s x2 */
+				opp-10000000-2 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+					opp-level = <2>;
+				};
+
+				/* 8 GT/s x1 */
+				opp-8000000-3 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+					opp-level = <3>;
+				};
+
+				/* 8 GT/s x2 */
+				opp-16000000-3 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+					opp-level = <3>;
+				};
+
+				/* 16 GT/s x1 */
+				opp-16000000-4 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+					opp-level = <4>;
+				};
+
+				/* 16 GT/s x2 */
+				opp-32000000-4 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+					opp-level = <4>;
+				};
+			};
+
 			pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -2483,36 +3961,6 @@
 			status = "disabled";
 		};
 
-		cryptobam: dma-controller@1dc4000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0 0x01dc4000 0 0x28000>;
-
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-
-			#dma-cells = <1>;
-
-			iommus = <&apps_smmu 0x480 0>,
-				 <&apps_smmu 0x481 0>;
-
-			qcom,ee = <0>;
-			qcom,controlled-remotely;
-		};
-
-		crypto: crypto@1dfa000 {
-			compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
-			reg = <0 0x01dfa000 0 0x6000>;
-
-			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-			interconnect-names = "memory";
-
-			dmas = <&cryptobam 4>, <&cryptobam 5>;
-			dma-names = "rx", "tx";
-
-			iommus = <&apps_smmu 0x480 0>,
-				 <&apps_smmu 0x481 0>;
-		};
-
 		ufs_mem_phy: phy@1d80000 {
 			compatible = "qcom,sm8650-qmp-ufs-phy";
 			reg = <0 0x01d80000 0 0x2000>;
@@ -2539,7 +3987,7 @@
 			compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
 				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
@@ -2557,30 +4005,26 @@
 				      "tx_lane0_sync_clk",
 				      "rx_lane0_sync_clk",
 				      "rx_lane1_sync_clk";
-			freq-table-hz = <100000000 403000000>,
-					<0 0>,
-					<0 0>,
-					<100000000 403000000>,
-					<100000000 403000000>,
-					<0 0>,
-					<0 0>,
-					<0 0>;
 
 			resets = <&gcc GCC_UFS_PHY_BCR>;
 			reset-names = "rst";
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "ufs-ddr",
 					     "cpu-ufs";
 
 			power-domains = <&gcc UFS_PHY_GDSC>;
 			required-opps = <&rpmhpd_opp_nom>;
 
+			operating-points-v2 = <&ufs_opp_table>;
+
 			iommus = <&apps_smmu 0x60 0>;
 
+			dma-coherent;
+
 			lanes-per-direction = <2>;
 			qcom,ice = <&ice>;
 
@@ -2590,6 +4034,46 @@
 			#reset-cells = <1>;
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-201500000 {
+					opp-hz = /bits/ 64 <201500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <201500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-403000000 {
+					opp-hz = /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ice: crypto@1d88000 {
@@ -2600,6 +4084,38 @@
 			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
 		};
 
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0 0x01f40000 0 0x20000>;
@@ -2626,7 +4142,7 @@
 				    "cx_mem",
 				    "cx_dbgc";
 
-			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			iommus = <&adreno_smmu 0 0x0>,
 				 <&adreno_smmu 1 0x0>;
@@ -2636,69 +4152,96 @@
 			qcom,gmu = <&gmu>;
 			#cooling-cells = <2>;
 
+			interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "gfx-mem";
+
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&gpu_micro_code_mem>;
 			};
 
 			/* Speedbin needs more work on A740+, keep only lower freqs */
 			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
+				compatible = "operating-points-v2-adreno",
+					     "operating-points-v2";
 
 				opp-231000000 {
 					opp-hz = /bits/ 64 <231000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					opp-peak-kBps = <2136718>;
+					qcom,opp-acd-level = <0xc82f5ffd>;
 				};
 
 				opp-310000000 {
 					opp-hz = /bits/ 64 <310000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					opp-peak-kBps = <2136718>;
+					qcom,opp-acd-level = <0xc82c5ffd>;
 				};
 
 				opp-366000000 {
 					opp-hz = /bits/ 64 <366000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					opp-peak-kBps = <6074218>;
+					qcom,opp-acd-level = <0xc02e5ffd>;
 				};
 
 				opp-422000000 {
 					opp-hz = /bits/ 64 <422000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0xc02d5ffd>;
 				};
 
 				opp-500000000 {
 					opp-hz = /bits/ 64 <500000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0xc02a5ffd>;
 				};
 
 				opp-578000000 {
 					opp-hz = /bits/ 64 <578000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0x882c5ffd>;
 				};
 
 				opp-629000000 {
 					opp-hz = /bits/ 64 <629000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					opp-peak-kBps = <10687500>;
+					qcom,opp-acd-level = <0x882a5ffd>;
 				};
 
 				opp-680000000 {
 					opp-hz = /bits/ 64 <680000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <12449218>;
+					qcom,opp-acd-level = <0x882a5ffd>;
 				};
 
 				opp-720000000 {
 					opp-hz = /bits/ 64 <720000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <12449218>;
+					qcom,opp-acd-level = <0x882a5ffd>;
 				};
 
 				opp-770000000 {
 					opp-hz = /bits/ 64 <770000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <12449218>;
+					qcom,opp-acd-level = <0x882a5ffd>;
 				};
 
 				opp-834000000 {
 					opp-hz = /bits/ 64 <834000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <14398437>;
+					qcom,opp-acd-level = <0x882a5ffd>;
 				};
 			};
 		};
@@ -2710,8 +4253,8 @@
 			      <0x0 0x0b280000 0x0 0x10000>;
 			reg-names = "gmu", "rscc", "gmu_pdc";
 
-			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "hfi", "gmu";
 
 			clocks = <&gpucc GPU_CC_AHB_CLK>,
@@ -2774,32 +4317,32 @@
 			reg = <0x0 0x03da0000 0x0 0x40000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
 				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
@@ -2824,8 +4367,8 @@
 				    "ipa-shared",
 				    "gsi";
 
-			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
-					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING 0>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH 0>,
 					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ipa",
@@ -2836,8 +4379,10 @@
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnects = <&aggre2_noc MASTER_IPA QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IPA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "memory",
 					     "config";
 
@@ -2853,9 +4398,9 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8650-mpss-pas";
-			reg = <0 0x04080000 0 0x4040>;
+			reg = <0x0 0x04080000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING 0>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2904,6 +4449,154 @@
 			};
 		};
 
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,sm8650-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <2>;
+
+				label = "lpass";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "adsp";
+
+					qcom,non-secure-domain;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1043 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1044 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1045 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1046 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1007 0x40>,
+							 <&apps_smmu 0x1067 0x0>,
+							 <&apps_smmu 0x1087 0x0>;
+						dma-coherent;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
 		lpass_wsa2macro: codec@6aa0000 {
 			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
 			reg = <0 0x06aa0000 0 0x1000>;
@@ -2924,7 +4617,7 @@
 		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
-			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_wsa2macro>;
 			clock-names = "iface";
 			label = "WSA2";
@@ -2971,7 +4664,7 @@
 		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_rxmacro>;
 			clock-names = "iface";
 			label = "RX";
@@ -3035,7 +4728,7 @@
 		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_wsamacro>;
 			clock-names = "iface";
 			label = "WSA";
@@ -3065,8 +4758,8 @@
 		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
-			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "core", "wakeup";
 			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
@@ -3257,8 +4950,8 @@
 			compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
 
-			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "hc_irq",
 					  "pwr_irq";
 
@@ -3271,8 +4964,8 @@
 
 			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
-					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "sdhc-ddr",
 					     "cpu-sdhc";
 
@@ -3318,12 +5011,271 @@
 			};
 		};
 
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8650-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x088e3000 0 0x154>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			mode-switch;
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a600000 {
+			compatible = "qcom,sm8650-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
+
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			phys = <&usb_1_hsphy>,
+			       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy",
+				    "usb3-phy";
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			iommus = <&apps_smmu 0x40 0>;
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,usb2-gadget-lpm-disable;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,usb3_lpm_capable;
+			snps,usb2-lpm-disable;
+			snps,has-lpm-erratum;
+			tx-fifo-resize;
+
+			dma-coherent;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_dwc3_hs: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+					};
+				};
+			};
+		};
+
+		iris: video-codec@aa00000 {
+			compatible = "qcom,sm8650-iris";
+			reg = <0 0x0aa00000 0 0xf0000>;
+
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+				 <&videocc VIDEO_CC_XO_CLK_ARES>,
+				 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+			reset-names = "bus",
+				      "xo",
+				      "core";
+
+			iommus = <&apps_smmu 0x1940 0>,
+				 <&apps_smmu 0x1947 0>;
+
+			dma-coherent;
+
+			/*
+			 * IRIS firmware is signed by vendors, only
+			 * enable on boards where the proper signed firmware
+			 * is available.
+			 */
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-196000000 {
+					opp-hz = /bits/ 64 <196000000>;
+					required-opps = <&rpmhpd_opp_low_svs_d1>,
+							<&rpmhpd_opp_low_svs_d1>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_low_svs>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-435000000 {
+					opp-hz = /bits/ 64 <435000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-533333334 {
+					opp-hz = /bits/ 64 <533333334>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,sm8650-videocc";
 			reg = <0 0x0aaf0000 0 0x10000>;
 			clocks = <&bi_tcxo_div2>,
 				 <&gcc GCC_VIDEO_AHB_CLK>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3332,7 +5284,7 @@
 		cci0: cci@ac15000 {
 			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac15000 0 0x1000>;
-			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3365,7 +5317,7 @@
 		cci1: cci@ac16000 {
 			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac16000 0 0x1000>;
-			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3398,7 +5350,7 @@
 		cci2: cci@ac17000 {
 			compatible = "qcom,sm8650-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac17000 0 0x1000>;
-			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3435,7 +5387,8 @@
 				 <&bi_tcxo_div2>,
 				 <&bi_tcxo_ao_div2>,
 				 <&sleep_clk>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3446,7 +5399,7 @@
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 				 <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -3455,11 +5408,11 @@
 			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
 
 			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
-					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
-					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "mdp0-mem",
-					     "mdp1-mem";
+					     "cpu-cfg";
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
@@ -3477,7 +5430,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8650-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
+				      <0 0x0aeb0000 0 0x3000>;
 				reg-names = "mdp",
 					    "vbif";
 
@@ -3577,8 +5530,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -3674,8 +5627,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -3744,16 +5697,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -3807,6 +5764,7 @@
 						reg = <1>;
 
 						mdss_dp0_out: endpoint {
+							data-lanes = <0 1 2 3>;
 							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 						};
 					};
@@ -3822,10 +5780,10 @@
 				 <&bi_tcxo_ao_div2>,
 				 <&gcc GCC_DISP_AHB_CLK>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
@@ -3843,169 +5801,6 @@
 			#power-domain-cells = <1>;
 		};
 
-		usb_1_hsphy: phy@88e3000 {
-			compatible = "qcom,sm8650-snps-eusb2-phy",
-				     "qcom,sm8550-snps-eusb2-phy";
-			reg = <0 0x088e3000 0 0x154>;
-
-			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
-			clock-names = "ref";
-
-			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_dp_qmpphy: phy@88e8000 {
-			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
-			reg = <0 0x088e8000 0 0x3000>;
-
-			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-			clock-names = "aux",
-				      "ref",
-				      "com_aux",
-				      "usb3_pipe";
-
-			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
-			reset-names = "phy",
-				      "common";
-
-			power-domains = <&gcc USB3_PHY_GDSC>;
-
-			#clock-cells = <1>;
-			#phy-cells = <1>;
-
-			orientation-switch;
-
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					usb_dp_qmpphy_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					usb_dp_qmpphy_usb_ss_in: endpoint {
-						remote-endpoint = <&usb_1_dwc3_ss>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-
-					usb_dp_qmpphy_dp_in: endpoint {
-						remote-endpoint = <&mdss_dp0_out>;
-					};
-				};
-			};
-		};
-
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
-
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
-					  "hs_phy_irq",
-					  "dp_hs_phy_irq",
-					  "dm_hs_phy_irq",
-					  "ss_phy_irq";
-
-			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
-				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
-				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-				 <&tcsr TCSR_USB3_CLKREF_EN>;
-			clock-names = "cfg_noc",
-				      "core",
-				      "iface",
-				      "sleep",
-				      "mock_utmi",
-				      "xo";
-
-			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
-
-			resets = <&gcc GCC_USB30_PRIM_BCR>;
-
-			power-domains = <&gcc USB30_PRIM_GDSC>;
-			required-opps = <&rpmhpd_opp_nom>;
-
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			status = "disabled";
-
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xcd00>;
-
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-
-				iommus = <&apps_smmu 0x40 0>;
-
-				phys = <&usb_1_hsphy>,
-				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy",
-					    "usb3-phy";
-
-				snps,hird-threshold = /bits/ 8 <0x0>;
-				snps,usb2-gadget-lpm-disable;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				snps,is-utmi-l1-suspend;
-				snps,usb3_lpm_capable;
-				snps,usb2-lpm-disable;
-				snps,has-lpm-erratum;
-				tx-fifo-resize;
-
-				dma-coherent;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						usb_1_dwc3_hs: endpoint {
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-
-						usb_1_dwc3_ss: endpoint {
-							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-						};
-					};
-				};
-			};
-		};
-
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8650-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
@@ -4025,8 +5820,8 @@
 			reg = <0 0x0c228000 0 0x1000>, /* TM */
 			      <0 0x0c222000 0 0x1000>; /* SROT */
 
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow",
 					  "critical";
 
@@ -4040,8 +5835,8 @@
 			reg = <0 0x0c229000 0 0x1000>, /* TM */
 			      <0 0x0c223000 0 0x1000>; /* SROT */
 
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow",
 					  "critical";
 
@@ -4055,8 +5850,8 @@
 			reg = <0 0x0c22a000 0 0x1000>, /* TM */
 			      <0 0x0c224000 0 0x1000>; /* SROT */
 
-			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow",
 					  "critical";
 
@@ -4081,6 +5876,7 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c400000 {
@@ -4114,7 +5910,7 @@
 			compatible = "qcom,sm8650-tlmm";
 			reg = <0 0x0f100000 0 0x300000>;
 
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -4854,107 +6650,239 @@
 			};
 		};
 
+		funnel@10042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x10042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+
+					funnel_in1_in_funnel_apss: endpoint {
+						remote-endpoint = <&funnel_apss_out_funnel_in1>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_in1_out_funnel_qdss: endpoint {
+						remote-endpoint = <&funnel_qdss_in_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@10045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x10045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					funnel_qdss_in_funnel_in1: endpoint {
+						remote-endpoint = <&funnel_in1_out_funnel_qdss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_qdss_out_funnel_aoss: endpoint {
+						remote-endpoint = <&funnel_aoss_in_funnel_qdss>;
+					};
+				};
+			};
+		};
+
+		funnel@10b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x10b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+
+					funnel_aoss_in_funnel_qdss: endpoint {
+						remote-endpoint = <&funnel_qdss_out_funnel_aoss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_aoss_out_tmc_etf: endpoint {
+						remote-endpoint = <&tmc_etf_in_funnel_aoss>;
+					};
+				};
+			};
+		};
+
+		tmc@10b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+
+			reg = <0x0 0x10b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmc_etf_in_funnel_aoss: endpoint {
+						remote-endpoint = <&funnel_aoss_out_tmc_etf>;
+					};
+				};
+			};
+		};
+
+		funnel@13810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+
+			reg = <0x0 0x13810000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					funnel_apss_in_funnel_ete: endpoint {
+						remote-endpoint = <&funnel_ete_out_funnel_apss>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_apss_out_funnel_in1: endpoint {
+						remote-endpoint = <&funnel_in1_in_funnel_apss>;
+					};
+				};
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
 
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
@@ -4967,9 +6895,9 @@
 			reg = <0 0x17100000 0 0x10000>,		/* GICD */
 			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
 
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
 
-			#interrupt-cells = <3>;
+			#interrupt-cells = <4>;
 			interrupt-controller;
 
 			#redistributor-regions = <1>;
@@ -4979,6 +6907,20 @@
 			#size-cells = <2>;
 			ranges;
 
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu2 &cpu3 &cpu4 &cpu5 &cpu6>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu7>;
+				};
+			};
+
 			gic_its: msi-controller@17140000 {
 				compatible = "arm,gic-v3-its";
 				reg = <0 0x17140000 0 0x20000>;
@@ -5000,8 +6942,8 @@
 				reg = <0x17421000 0x1000>,
 				      <0x17422000 0x1000>;
 
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <0>;
 			};
@@ -5009,7 +6951,7 @@
 			frame@17423000 {
 				reg = <0x17423000 0x1000>;
 
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <1>;
 
@@ -5019,7 +6961,7 @@
 			frame@17425000 {
 				reg = <0x17425000 0x1000>;
 
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <2>;
 
@@ -5029,7 +6971,7 @@
 			frame@17427000 {
 				reg = <0x17427000 0x1000>;
 
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <3>;
 
@@ -5039,7 +6981,7 @@
 			frame@17429000 {
 				reg = <0x17429000 0x1000>;
 
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <4>;
 
@@ -5049,7 +6991,7 @@
 			frame@1742b000 {
 				reg = <0x1742b000 0x1000>;
 
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <5>;
 
@@ -5059,7 +7001,7 @@
 			frame@1742d000 {
 				reg = <0x1742d000 0x1000>;
 
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
 
 				frame-number = <6>;
 
@@ -5071,15 +7013,14 @@
 			compatible = "qcom,rpmh-rsc";
 			reg = <0 0x17a00000 0 0x10000>,
 			      <0 0x17a10000 0 0x10000>,
-			      <0 0x17a20000 0 0x10000>,
-			      <0 0x17a30000 0 0x10000>;
+			      <0 0x17a20000 0 0x10000>;
 			reg-names = "drv-0",
 				    "drv-1",
 				    "drv-2";
 
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			power-domains = <&cluster_pd>;
 
@@ -5176,6 +7117,16 @@
 			};
 		};
 
+		epss_l3: interconnect@17d90000 {
+			compatible = "qcom,sm8650-epss-l3", "qcom,epss-l3";
+			reg = <0 0x17d90000 0 0x1000>;
+
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@17d91000 {
 			compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss";
 			reg = <0 0x17d91000 0 0x1000>,
@@ -5187,10 +7138,10 @@
 				    "freq-domain2",
 				    "freq-domain3";
 
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "dcvsh-irq-0",
 					  "dcvsh-irq-1",
 					  "dcvsh-irq-2",
@@ -5207,7 +7158,7 @@
 			compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
 			reg = <0 0x24091000 0 0x1000>;
 
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
@@ -5259,7 +7210,7 @@
 			compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x240b7400 0 0x600>;
 
-			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
@@ -5319,155 +7270,7 @@
 				    "llcc_broadcast_base",
 				    "llcc_broadcast_and_base";
 
-			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8650-adsp-pas";
-			reg = <0 0x30000000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog",
-					  "fatal",
-					  "ready",
-					  "handover",
-					  "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx",
-					     "lmx";
-
-			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				qcom,remote-pid = <2>;
-
-				label = "lpass";
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-
-					label = "adsp";
-
-					qcom,non-secure-domain;
-
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-
-						iommus = <&apps_smmu 0x1003 0x80>,
-							 <&apps_smmu 0x1043 0x20>;
-						dma-coherent;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-
-						iommus = <&apps_smmu 0x1004 0x80>,
-							 <&apps_smmu 0x1044 0x20>;
-						dma-coherent;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-
-						iommus = <&apps_smmu 0x1005 0x80>,
-							 <&apps_smmu 0x1045 0x20>;
-						dma-coherent;
-					};
-
-					compute-cb@6 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <6>;
-
-						iommus = <&apps_smmu 0x1006 0x80>,
-							 <&apps_smmu 0x1046 0x20>;
-						dma-coherent;
-					};
-
-					compute-cb@7 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <7>;
-
-						iommus = <&apps_smmu 0x1007 0x40>,
-							 <&apps_smmu 0x1067 0x0>,
-							 <&apps_smmu 0x1087 0x0>;
-						dma-coherent;
-					};
-				};
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1001 0x80>,
-								 <&apps_smmu 0x1061 0x0>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-			};
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
 		nsp_noc: interconnect@320c0000 {
@@ -5481,9 +7284,9 @@
 
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8650-cdsp-pas";
-			reg = <0 0x32300000 0 0x1400000>;
+			reg = <0x0 0x32300000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING 0>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -5622,7 +7425,7 @@
 
 					/* note: secure cb9 in downstream */
 
-					compute-cb@10 {
+					compute-cb@12 {
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <12>;
 
@@ -5632,7 +7435,7 @@
 						dma-coherent;
 					};
 
-					compute-cb@11 {
+					compute-cb@13 {
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <13>;
 
@@ -5642,7 +7445,7 @@
 						dma-coherent;
 					};
 
-					compute-cb@12 {
+					compute-cb@14 {
 						compatible = "qcom,fastrpc-compute-cb";
 						reg = <14>;
 
@@ -5661,14 +7464,14 @@
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				aoss0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				aoss0-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -5679,14 +7482,14 @@
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				cpuss0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				cpuss0-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -5697,14 +7500,14 @@
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				cpuss1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				cpuss1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -5715,14 +7518,14 @@
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				cpuss2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				cpuss2-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -5733,14 +7536,14 @@
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				cpuss3-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				cpuss3-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -5751,18 +7554,6 @@
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu2-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5775,18 +7566,6 @@
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu2-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5799,18 +7578,6 @@
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu3-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5823,18 +7590,6 @@
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu3-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5847,18 +7602,6 @@
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu4-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5871,18 +7614,6 @@
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu4-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5895,18 +7626,6 @@
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu5-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5919,18 +7638,6 @@
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu5-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5943,18 +7650,6 @@
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu6-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5967,18 +7662,6 @@
 			thermal-sensors = <&tsens0 14>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu6-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -5991,14 +7674,14 @@
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				aoss1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				aoss1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6009,18 +7692,6 @@
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu7-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6033,18 +7704,6 @@
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu7-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6057,18 +7716,6 @@
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu7-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6081,18 +7728,6 @@
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu0-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6105,18 +7740,6 @@
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
 				cpu1-critical {
 					temperature = <110000>;
 					hysteresis = <1000>;
@@ -6126,19 +7749,17 @@
 		};
 
 		nsphvx0-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphvx0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
-				nsphvx1-critical {
-					temperature = <110000>;
+				nsphvx0-critical {
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6146,19 +7767,17 @@
 		};
 
 		nsphvx1-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphvx1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				nsphvx1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6166,19 +7785,17 @@
 		};
 
 		nsphmx0-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 8>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphmx0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				nsphmx0-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6186,19 +7803,17 @@
 		};
 
 		nsphmx1-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphmx1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				nsphmx1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6206,19 +7821,17 @@
 		};
 
 		nsphmx2-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphmx2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				nsphmx2-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6226,19 +7839,17 @@
 		};
 
 		nsphmx3-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens2 11>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				nsphmx3-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				nsphmx3-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6246,19 +7857,17 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens1 12>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				video-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				video-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6266,19 +7875,17 @@
 		};
 
 		ddr-thermal {
-			polling-delay-passive = <10>;
-
 			thermal-sensors = <&tsens1 13>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				ddr-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				ddr-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6289,14 +7896,14 @@
 			thermal-sensors = <&tsens1 14>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				camera0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				camera0-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6307,14 +7914,14 @@
 			thermal-sensors = <&tsens1 15>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				camera1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				camera1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6325,14 +7932,14 @@
 			thermal-sensors = <&tsens2 0>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				aoss2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				aoss2-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6353,20 +7960,20 @@
 
 			trips {
 				gpu0_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6386,20 +7993,20 @@
 
 			trips {
 				gpu1_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6419,20 +8026,20 @@
 
 			trips {
 				gpu2_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6452,20 +8059,20 @@
 
 			trips {
 				gpu3_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6485,20 +8092,20 @@
 
 			trips {
 				gpu4_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6518,20 +8125,20 @@
 
 			trips {
 				gpu5_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6551,20 +8158,20 @@
 
 			trips {
 				gpu6_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6584,20 +8191,20 @@
 
 			trips {
 				gpu7_alert0: trip-point0 {
-					temperature = <85000>;
+					temperature = <95000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <90000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				trip-point2 {
-					temperature = <110000>;
-					hysteresis = <1000>;
+					temperature = <115000>;
+					hysteresis = <0>;
 					type = "critical";
 				};
 			};
@@ -6607,14 +8214,14 @@
 			thermal-sensors = <&tsens2 9>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				modem0-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				modem0-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6625,14 +8232,14 @@
 			thermal-sensors = <&tsens2 10>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				modem1-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				modem1-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6643,14 +8250,14 @@
 			thermal-sensors = <&tsens2 11>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				modem2-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				modem2-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6661,14 +8268,14 @@
 			thermal-sensors = <&tsens2 12>;
 
 			trips {
-				trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
+				modem3-hot {
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
 				modem3-critical {
-					temperature = <110000>;
+					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
@@ -6679,9 +8286,9 @@
 	timer {
 		compatible = "arm,armv8-timer";
 
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
new file mode 100644
index 000000000000..c8cb521b4c26
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -0,0 +1,1275 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8750.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pmd8028.dtsi"
+#include "pmih0108.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+#include "sm8750-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8750 MTP";
+	compatible = "qcom,sm8750-mtp", "qcom,sm8750";
+	chassis-type = "handset";
+
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	wcd939x: audio-codec {
+		compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+		vdd-px-supply = <&vreg_l2i_1p2>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8750-MTP";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3", /* MIC4 on schematics */
+				"VA DMIC1", "MIC BIAS3", /* MIC1 on schematics */
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS3",
+				"VA DMIC1", "VA MIC BIAS3",
+				"VA DMIC2", "VA MIC BIAS1",
+				"VA DMIC3", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8750-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * MTPs rev 2.0 (power grid v8) come with two different WiFi chips:
+	 * WCN7850 and WCN786x.
+	 * Device nodes here for the PMU, WiFi and Bluetooth describe the MTP
+	 * variant with WCN7850.
+	 */
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>, <&bt_default>;
+
+		wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&pm8550ve_f_gpios 3 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s5f_0p85>;
+		vddio-supply = <&vreg_l3f_1p8>;
+		vddio1p2-supply = <&vreg_l2f_1p2>;
+		vddaon-supply = <&vreg_s4d_0p85>;
+		vdddig-supply = <&vreg_s1d_0p97>;
+		vddrfa1p2-supply = <&vreg_s7i_1p2>;
+		vddrfa1p8-supply = <&vreg_s3g_1p8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s3g_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s7i_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s7i_1p2>;
+		vdd-l12-supply = <&vreg_s3g_1p8>;
+		vdd-l15-supply = <&vreg_s3g_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3148000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p0: ldo11 {
+			regulator-name = "vreg_l11b_1p0";
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1292000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s7i_1p2>;
+		vdd-l2-supply = <&vreg_s1d_0p97>;
+		vdd-l3-supply = <&vreg_s1d_0p97>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "d";
+
+		vreg_s1d_0p97: smps1 {
+			regulator-name = "vreg_s1d_0p97";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3d_1p2: smps3 {
+			regulator-name = "vreg_s3d_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4d_0p85: smps4 {
+			regulator-name = "vreg_s4d_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1d_1p2: ldo1 {
+			regulator-name = "vreg_l1d_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p88: ldo2 {
+			regulator-name = "vreg_l2d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_0p88: ldo3 {
+			regulator-name = "vreg_l3d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-supply = <&vreg_s3g_1p8>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "f";
+
+		vreg_s5f_0p85: smps5 {
+			regulator-name = "vreg_s5f_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p88: ldo1 {
+			regulator-name = "vreg_l1f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-name = "vreg_l2f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p8: ldo3 {
+			regulator-name = "vreg_l3f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s3g_1p8>;
+		vdd-l3-supply = <&vreg_s7i_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "g";
+
+		vreg_s1g_0p5: smps1 {
+			regulator-name = "vreg_s1g_0p5";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_1p8: smps3 {
+			regulator-name = "vreg_s3g_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_0p75: smps4 {
+			regulator-name = "vreg_s4g_0p75";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <936000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2g_1p8: ldo2 {
+			regulator-name = "vreg_l2g_1p8";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1860000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s7i_1p2>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-supply = <&vreg_s1d_0p97>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s7i_1p2: smps7 {
+			regulator-name = "vreg_s7i_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1340000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8i_0p9: smps8 {
+			regulator-name = "vreg_s8i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <972000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p2: ldo1 {
+			regulator-name = "vreg_l1i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p88: ldo3 {
+			regulator-name = "vreg_l3i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "j";
+
+		vreg_s2j_1p1: smps2 {
+			regulator-name = "vreg_s2j_1p1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3j_1p1: smps3 {
+			regulator-name = "vreg_s3j_1p1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p91: ldo1 {
+			regulator-name = "vreg_l1j_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s3g_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p1: ldo1 {
+			regulator-name = "vreg_l1m_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_2p8: ldo6 {
+			regulator-name = "vreg_l6m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p96: ldo7 {
+			regulator-name = "vreg_l7m_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-l4-supply = <&vreg_s3g_1p8>;
+		vdd-l5-supply = <&vreg_bob2>;
+		vdd-l6-supply = <&vreg_bob2>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_1p8: ldo3 {
+			regulator-name = "vreg_l3n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_1p8: ldo4 {
+			regulator-name = "vreg_l4n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_2p8: ldo5 {
+			regulator-name = "vreg_l5n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_2p8: ldo6 {
+			regulator-name = "vreg_l6n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_3p3: ldo7 {
+			regulator-name = "vreg_l7n_3p3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1f_0p88>;
+	vdda-pll-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pmih0108_eusb2_repeater {
+	status = "okay";
+
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8750/adsp.mbn",
+			"qcom/sm8750/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8750/cdsp.mbn",
+			"qcom/sm8750/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8750/modem.mbn",
+			"qcom/sm8750/modem_dtb.mbn";
+
+	/* Modem crashes after some time with "DOG detects stalled initialization" */
+	status = "fail";
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA883x, left/front speaker */
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_0_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l15b_1p8>;
+		/*
+		 * WSA8835 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8835 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8835 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8835 Port 4 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 */
+		qcom,port-mapping = <1 2 3 10>;
+	};
+
+	/* WSA883x, right/back speaker */
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l15b_1p8>;
+		/*
+		 * WSA8835 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8835 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8835 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8835 Port 4 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 */
+		qcom,port-mapping = <4 5 6 11>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9395 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010e00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5 9>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9395 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010e00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	/* reserved for secure world */
+	gpio-reserved-ranges = <36 4>, <74 1>;
+};
+
+&uart7 {
+	status = "okay";
+};
+
+/* Pinctrl */
+&lpass_tlmm {
+	spkr_0_sd_n_active: spkr-0-sd-n-active-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&tlmm {
+	bt_default: bt-default-state {
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio101";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1j_0p91>;
+	vdda-pll-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1d_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8750-pmics.dtsi b/arch/arm64/boot/dts/qcom/sm8750-pmics.dtsi
new file mode 100644
index 000000000000..6eb8d78937c3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8750-pmics.dtsi
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/ {
+	thermal-zones {
+		pm8550ve-d-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_d_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-f-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_f_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-g-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_g_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550vs-j-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550vs_j_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	/* PM8550VE */
+	pm8550ve_d: pmic@3 {
+		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_d_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_d_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_d_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550ve_f: pmic@5 {
+		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_f_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_f_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_f_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550ve_g: pmic@6 {
+		compatible = "qcom,pm8550ve", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_g_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_g_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_g_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	/* PM8550VS */
+	pm8550vs_j: pmic@9 {
+		compatible = "qcom,pm8550vs", "qcom,spmi-pmic";
+		reg = <0x9 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_j_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_j_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_j_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
new file mode 100644
index 000000000000..b0cb61c5a603
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
@@ -0,0 +1,1129 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8750.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pmd8028.dtsi"
+#include "pmih0108.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+#include "sm8750-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8750 QRD";
+	compatible = "qcom,sm8750-qrd", "qcom,sm8750";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	wcd939x: audio-codec {
+		compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+		/*
+		 * Mismatch with schematics - downstream DTS has L15B at 1.8 V,
+		 * schematics L2I at 1.2 V
+		 */
+		vdd-px-supply = <&vreg_l15b_1p8>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8750-QRD";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
+				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT2", "ADC3_OUTPUT",
+				"TX SWR_INPUT3", "ADC4_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8750-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s3g_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s7i_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s7i_1p2>;
+		vdd-l12-supply = <&vreg_s3g_1p8>;
+		vdd-l15-supply = <&vreg_s3g_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3148000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p0: ldo11 {
+			regulator-name = "vreg_l11b_1p0";
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1292000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s7i_1p2>;
+		vdd-l2-supply = <&vreg_s1d_0p97>;
+		vdd-l3-supply = <&vreg_s1d_0p97>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "d";
+
+		vreg_s1d_0p97: smps1 {
+			regulator-name = "vreg_s1d_0p97";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3d_1p2: smps3 {
+			regulator-name = "vreg_s3d_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4d_0p85: smps4 {
+			regulator-name = "vreg_s4d_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1d_1p2: ldo1 {
+			regulator-name = "vreg_l1d_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p88: ldo2 {
+			regulator-name = "vreg_l2d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_0p88: ldo3 {
+			regulator-name = "vreg_l3d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-supply = <&vreg_s3g_1p8>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "f";
+
+		vreg_s5f_0p5: smps5 {
+			regulator-name = "vreg_s5f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p88: ldo1 {
+			regulator-name = "vreg_l1f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-name = "vreg_l2f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p8: ldo3 {
+			regulator-name = "vreg_l3f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s3g_1p8>;
+		vdd-l3-supply = <&vreg_s7i_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "g";
+
+		vreg_s1g_0p5: smps1 {
+			regulator-name = "vreg_s1g_0p5";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_1p8: smps3 {
+			regulator-name = "vreg_s3g_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_0p75: smps4 {
+			regulator-name = "vreg_s4g_0p75";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <936000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2g_1p8: ldo2 {
+			regulator-name = "vreg_l2g_1p8";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1860000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s7i_1p2>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-supply = <&vreg_s1d_0p97>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s7i_1p2: smps7 {
+			regulator-name = "vreg_s7i_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1340000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8i_0p9: smps8 {
+			regulator-name = "vreg_s8i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <972000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p2: ldo1 {
+			regulator-name = "vreg_l1i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p88: ldo3 {
+			regulator-name = "vreg_l3i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1d_0p97>;
+		vdd-l2-supply = <&vreg_s7i_1p2>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "j";
+
+		vreg_s2j_1p1: smps2 {
+			regulator-name = "vreg_s2j_1p1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3j_1p1: smps3 {
+			regulator-name = "vreg_s3j_1p1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+
+		vreg_l1j_0p91: ldo1 {
+			regulator-name = "vreg_l1j_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-l4-supply = <&vreg_s3g_1p8>;
+		vdd-l5-supply = <&vreg_s3g_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p1: ldo1 {
+			regulator-name = "vreg_l1m_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_2p8: ldo6 {
+			regulator-name = "vreg_l6m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p96: ldo7 {
+			regulator-name = "vreg_l7m_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s7i_1p2>;
+		vdd-l3-l4-supply = <&vreg_s7i_1p2>;
+		vdd-l5-supply = <&vreg_bob2>;
+		vdd-l6-supply = <&vreg_bob2>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_1p8: ldo3 {
+			regulator-name = "vreg_l3n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_1p8: ldo4 {
+			regulator-name = "vreg_l4n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_2p8: ldo5 {
+			regulator-name = "vreg_l5n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_2p8: ldo6 {
+			regulator-name = "vreg_l6n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_3p3: ldo7 {
+			regulator-name = "vreg_l7n_3p3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pmih0108_eusb2_repeater {
+	status = "okay";
+
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8750/adsp.mbn",
+			"qcom/sm8750/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8750/cdsp.mbn",
+			"qcom/sm8750/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8750/modem.mbn",
+			"qcom/sm8750/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker North */
+	north_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_0_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 76 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l2i_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Speaker South */
+	south_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l2i_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9395 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010e00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5 9>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9395 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010e00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	/* reserved for secure world */
+	gpio-reserved-ranges = <36 4>, <74 1>;
+
+	spkr_0_sd_n_active: spkr-0-sd-n-active-state {
+		pins = "gpio76";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio101";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1j_0p91>;
+	vdda-pll-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1d_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
new file mode 100644
index 000000000000..3f0b57f428bb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -0,0 +1,4242 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8750-gcc.h>
+#include <dt-bindings/clock/qcom,sm8750-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+		};
+
+		cpu6: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		cpu7: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&l2_1>;
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cluster0_c4: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <93>;
+				exit-latency-us = <129>;
+				min-residency-us = <560>;
+			};
+
+			cluster1_c4: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <172>;
+				exit-latency-us = <130>;
+				min-residency-us = <686>;
+			};
+		};
+
+		domain-idle-states {
+			cluster_cl5: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x01000054>;
+				entry-latency-us = <2150>;
+				exit-latency-us = <1983>;
+				min-residency-us = <9144>;
+			};
+
+			domain_ss3: domain-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x0200c354>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8750", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8750-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8750-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0xa0000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster0_pd>;
+			domain-idle-states = <&cluster0_c4>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster1_pd>;
+			domain-idle-states = <&cluster1_c4>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster1_pd>;
+			domain-idle-states = <&cluster1_c4>;
+		};
+
+		cluster0_pd: power-domain-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_cl5>;
+			power-domains = <&system_pd>;
+		};
+
+		cluster1_pd: power-domain-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_cl5>;
+			power-domains = <&system_pd>;
+		};
+
+		system_pd: power-domain-system {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&domain_ss3>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0xe00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm-mem@80e00000 {
+			reg = <0x0 0x80e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_mem: cpucp@81200000 {
+			reg = <0x0 0x81200000 0x0 0x200000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog@81a00000 {
+			reg = <0x0 0x81a00000 0x0 0x40000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		/* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
+			reg = <0x0 0x81c80000 0x0 0x74000>;
+			no-map;
+		};
+
+		/* Secdata region can be reused by apps */
+
+		smem_mem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x81d00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		pdp_ns_shared_mem: pdp-ns-shared@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cpucp_scandump_mem: cpucp-scandump@82000000 {
+			reg = <0x0 0x82000000 0x0 0x380000>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi@82380000 {
+			reg = <0x0 0x82380000 0x0 0x20000>;
+			no-map;
+		};
+
+		soccp_sdi_mem: soccp-sdi@823a0000 {
+			reg = <0x0 0x823a0000 0x0 0x40000>;
+			no-map;
+		};
+
+		pmic_minii_dump_mem: pmic-minii-dump@823e0000 {
+			reg = <0x0 0x823e0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pvmfw_mem: pvmfw@824a0000 {
+			reg = <0x0 0x824a0000 0x0 0x100000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync@82600000 {
+			reg = <0x0 0x82600000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0x0 0x82700000 0x0 0x100000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@82800000 {
+			reg = <0x0 0x82800000 0x0 0x2000000>;
+			no-map;
+		};
+
+		dsm_partition_1_mem: dsm-partition-1@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x4900000>;
+			no-map;
+		};
+
+		dsm_partition_2_mem: dsm-partition-2@89300000 {
+			reg = <0x0 0x89300000 0x0 0xa80000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8ba00000 {
+			reg = <0x0 0x8ba00000 0x0 0xf600000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 {
+			reg = <0x0 0x9b000000 0x0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@9b080000 {
+			reg = <0x0 0x9b080000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@9b090000 {
+			reg = <0x0 0x9b090000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@9b09a000 {
+			reg = <0x0 0x9b09a000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss@9b0a0000  {
+			reg = <0x0 0x9b0a0000 0x0 0x1e0000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared@9b280000 {
+			reg = <0x0 0x9b280000 0x0 0x40000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared@9b2c0000 {
+			reg = <0x0 0x9b2c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		camera_mem: camera@9b300000 {
+			reg = <0x0 0x9b300000 0x0 0x800000>;
+			no-map;
+		};
+
+		camera_2_mem: camera-2@9bb00000 {
+			reg = <0x0 0x9bb00000 0x0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@9c300000 {
+			reg = <0x0 0x9c300000 0x0 0x800000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@9cb00000 {
+			reg = <0x0 0x9cb00000 0x0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@9d200000 {
+			reg = <0x0 0x9d200000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@9eb00000 {
+			reg = <0x0 0x9eb00000 0x0 0x80000>;
+			no-map;
+		};
+
+		soccp_mem: soccp@9ec00000 {
+			reg = <0x0 0x9ec00000 0x0 0x180000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@9ed80000 {
+			reg = <0x0 0x9ed80000 0x0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@9ee00000 {
+			reg = <0x0 0x9ee00000 0x0 0x3a80000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf@d4e23000 {
+			no-map;
+			reg = <0x0 0xd4e23000 0x0 0x2dd000>;
+		};
+
+		/* Merged tz_reserved, xbl_sc, and qtee regions */
+		tz_merged_mem: tz-merged@d8000000 {
+			reg = <0x0 0xd8000000 0x0 0x600000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm@f3800000 {
+			reg = <0x0 0xf3800000 0x0 0x4400000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm@f7c00000 {
+			reg = <0x0 0xf7c00000 0x0 0x4c00000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0x0 0xff800000 0x0 0x800000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <435>, <428>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		/* TODO: smem mailbox in and out */
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8750-gcc";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <0>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipcc: mailbox@406000 {
+			compatible = "qcom,sm8750-ipcc", "qcom,ipcc";
+			reg = <0x0 0x00406000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8750-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00800000 0x0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x1e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00884000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00884000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0088c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0088c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00894000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00894000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart14: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00898000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart14_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			i2c15: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0089c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi15: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0089c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		i2c_master_hub_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-i2c-master-hub";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+			clock-names = "s-ahb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c_hub_0: i2c@980000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_1: i2c@984000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_2: i2c@988000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_3: i2c@98c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_4: i2c@990000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_5: i2c@994000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_6: i2c@998000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00998000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_7: i2c@99c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x0099c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_8: i2c@9a0000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x009a0000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_9: i2c@9a4000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x009a4000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8750-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00a00000 0x0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x1e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0xa3 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a98000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a98000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@a9c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a9c000 0x0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart7_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8750-trng", "qcom,trng";
+			reg = <0x0 0x010c3000 0x0 0x1000>;
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sm8750-cnoc-main";
+			reg = <0x0 0x01500000 0x0 0x16080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sm8750-config-noc";
+			reg = <0x0 0x01600000 0x0 0x6200>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8750-system-noc";
+			reg = <0x0 0x01680000 0x0 0x1d080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8750-pcie-anoc";
+			reg = <0x0 0x016c0000 0x0 0x11400>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8750-aggre1-noc";
+			reg = <0x0 0x016e0000 0x0 0x16400>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8750-aggre2-noc";
+			reg = <0x0 0x01700000 0x0 0x1f400>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sm8750-mmss-noc";
+			reg = <0x0 0x01780000 0x0 0x5b800>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8750-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x18000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8750-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8750-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx",
+					     "mss";
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+					<&dsm_partition_1_mem>,
+					<&dsm_partition_2_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <1>;
+
+				label = "mpss";
+			};
+		};
+
+		remoteproc_adsp: remoteproc@6800000 {
+			compatible = "qcom,sm8750-adsp-pas", "qcom,sm8550-adsp-pas";
+			reg = <0x0 0x06800000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				qcom,remote-pid = <2>;
+				label = "lpass";
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1041 0x20>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8750-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0x0 0x06aa0000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire@6ab0000 {
+			compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+			reg = <0x0 0x06ab0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8750-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0x0 0x06ac0000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@6ad0000 {
+			compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+			reg = <0x0 0x06ad0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <1>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0x31 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0x0f 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0x18 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8750-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0x0 0x06ae0000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8750-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0x0 0x06b00000 0x0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire@6b10000 {
+			compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+			reg = <0x0 0x06b10000 0x0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sm8750-lpass-ag-noc";
+			reg = <0x0 0x07e40000 0x0 0xe080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sm8750-lpass-lpiaon-noc";
+			reg = <0x0 0x07400000 0x0 0x19080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpicx_noc: interconnect@7420000 {
+			compatible = "qcom,sm8750-lpass-lpicx-noc";
+			reg = <0x0 0x07420000 0x0 0x44080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		swr2: soundwire@7630000 {
+			compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+			reg = <0x0 0x07630000 0x0 0x10000>;
+			interrupts = <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@7660000 {
+			compatible = "qcom,sm8750-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0x0 0x07660000 0x0 0x2000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@7760000 {
+			compatible = "qcom,sm8750-lpass-lpi-pinctrl",
+				     "qcom,sm8650-lpass-lpi-pinctrl";
+			reg = <0x0 0x07760000 0x0 0x20000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic23_default: dmic23-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		usb_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8750-m31-eusb2-phy";
+			reg = <0x0 0x88e3000 0x0 0x29c>;
+
+			clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8750-qmp-usb3-dp-phy";
+			reg = <0x0 0x088e8000 0x0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&tcsrcc TCSR_USB3_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb: usb@a600000 {
+			compatible = "qcom,sm8750-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>,
+					       <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			iommus = <&apps_smmu 0x40 0x0>;
+
+			phys = <&usb_hsphy>,
+			       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy",
+				    "usb3-phy";
+
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,usb2-gadget-lpm-disable;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,usb3_lpm_capable;
+			snps,usb2-lpm-disable;
+			snps,has-lpm-erratum;
+			tx-fifo-resize;
+
+			dma-coherent;
+			usb-role-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dwc3_hs: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8750-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>;
+
+			qcom,pdc-ranges = <0 745 51>, <51 527 47>,
+					  <98 609 32>, <130 717 12>,
+					  <142 251 5>, <147 796 16>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8750-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c400000 0x0 0x3000>,
+			      <0x0 0x0c500000 0x0 0x400000>,
+			      <0x0 0x0c440000 0x0 0x80000>,
+			      <0x0 0x0c4c0000 0x0 0x10000>,
+			      <0x0 0x0c42d000 0x0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+
+			interrupt-controller;
+			#interrupt-cells = <4>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8750-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x102000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 216>;
+			wakeup-parent = <&pdc>;
+
+			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "i2chub0_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio66", "gpio67";
+				function = "i2chub0_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "i2chub0_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio70", "gpio71";
+				function = "i2chub0_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "i2chub0_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio74", "gpio75";
+				function = "i2chub0_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "i2chub0_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio82", "gpio83";
+				function = "i2chub0_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio206", "gpio207";
+				function = "i2chub0_se8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "i2chub0_se9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio102";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio103";
+					function = "pcie0_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio104";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio28", "gpio29";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio3";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio7";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio11";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio15";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio19";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio23";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio31";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio28", "gpio29", "gpio30";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart7_default: qup-uart7-default-state {
+				/* TX, RX */
+				pins = "gpio62", "gpio63";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio26", "gpio27";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		tcsrcc: clock-controller@f204008 {
+			compatible = "qcom,sm8750-tcsr", "syscon";
+			reg = <0x0 0x0f204008 0x0 0x3004>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8750-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 493 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@16000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x16000000 0x0 0x10000>,
+			      <0x0 0x16080000 0x0 0x200000>;
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@16040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x16040000 0x0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		pcie0: pcie@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8750", "qcom,pcie-sm8550";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01C03000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x23d00000>,
+				 <0x03000000 0x4 0x00000000 0x4 0x00000000 0x3 0x00000000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+
+			msi-map = <0x0 &gic_its 0x1400 0x1>,
+				  <0x100 &gic_its 0x1401 0x1>;
+			msi-map-mask = <0xff00>;
+
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+			operating-points-v2 = <&pcie0_opp_table>;
+
+			status = "disabled";
+
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+			};
+
+			pcieport0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+				phys = <&pcie0_phy>;
+			};
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8750-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsrcc TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			power-domains = <&gcc GCC_PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,sm8750-qmp-ufs-phy";
+			reg = <0x0 0x01d80000 0x0 0x2000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&tcsrcc TCSR_UFS_CLKREF_EN>;
+
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm8750-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_LN_BB_CLK3>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+
+			operating-points-v2 = <&ufs_opp_table>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x60 0>;
+			dma-coherent;
+
+			lanes-per-direction = <2>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-403000000 {
+					opp-hz = /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <403000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		apps_rsc: rsc@16500000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x16500000 0x0 0x10000>,
+			      <0x0 0x16510000 0x0 0x10000>,
+			      <0x0 0x16520000 0x0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			power-domains = <&system_pd>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8750-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8750-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d3: opp-50 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D3>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp-224 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+
+					rpmhpd_opp_turbo_l2: opp-432 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
+					};
+
+					rpmhpd_opp_turbo_l3: opp-448 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
+					};
+
+					rpmhpd_opp_turbo_l4: opp-452 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
+					};
+
+					rpmhpd_opp_super_turbo_no_cpr: opp-480 {
+						opp-level =
+							<RPMH_REGULATOR_LEVEL_SUPER_TURBO_NO_CPR>;
+					};
+				};
+			};
+		};
+
+		timer@16800000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x16800000 0x0 0x1000>;
+
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0 0x20000000>;
+
+			frame@16801000 {
+				reg = <0x0 0x16801000 0x1000>,
+				      <0x0 0x16802000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@16803000 {
+				reg = <0x0 0x16803000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@16805000 {
+				reg = <0x0 0x16805000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@16807000 {
+				reg = <0x0 0x16807000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@16809000 {
+				reg = <0x0 0x16809000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1680b000 {
+				reg = <0x0 0x1680b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1680d000 {
+				reg = <0x0 0x1680d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		/* cluster0 */
+		pmu@240b3400 {
+			compatible = "qcom,sm8750-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x240b3400 0x0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			nonposted-mmio;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <800000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2188000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5414400>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6220800>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <6835200>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <8371200>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <10944000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <12748800>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <14745600>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <16896000>;
+				};
+
+				opp-10 {
+					opp-peak-kBps = <19046400>;
+				};
+			};
+		};
+
+		/* cluster1 */
+		pmu@240b7400 {
+			compatible = "qcom,sm8750-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x240b7400 0x0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
+		gem_noc: interconnect@24100000 {
+			compatible = "qcom,sm8750-gem-noc";
+			reg = <0x0 0x24100000 0x0 0x14b080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		system-cache-controller@24800000 {
+			compatible = "qcom,sm8750-llcc";
+			reg = <0x0 0x24800000 0x0 0x200000>,
+			      <0x0 0x25800000 0x0 0x200000>,
+			      <0x0 0x24c00000 0x0 0x200000>,
+			      <0x0 0x25c00000 0x0 0x200000>,
+			      <0x0 0x26800000 0x0 0x200000>,
+			      <0x0 0x26c00000 0x0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8750-nsp-noc";
+			reg = <0x0 0x320c0000 0x0 0x13080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8750-cdsp-pas", "qcom,sm8650-cdsp-pas";
+			reg = <0x0 0x32300000 0x0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+			qcom,qmp = <&aoss_qmp>;
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				qcom,remote-pid = <5>;
+				label = "cdsp";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x19c1 0x0>,
+							 <&apps_smmu 0x0c21 0x0>,
+							 <&apps_smmu 0x0c01 0x40>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x0c42 0x0>,
+							 <&apps_smmu 0x19c2 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c23 0x0>,
+							 <&apps_smmu 0x0c03 0x40>,
+							 <&apps_smmu 0x19c3 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c24 0x0>,
+							 <&apps_smmu 0x0c04 0x40>,
+							 <&apps_smmu 0x19c4 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c25 0x0>,
+							 <&apps_smmu 0x0c05 0x40>,
+							 <&apps_smmu 0x19c5 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x0c46 0x0>,
+							 <&apps_smmu 0x19c6 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c27 0x0>,
+							 <&apps_smmu 0x0c07 0x40>,
+							 <&apps_smmu 0x19c7 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x0c48 0x0>,
+							 <&apps_smmu 0x19c8 0x0>;
+						dma-coherent;
+					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x196c 0x0>,
+							 <&apps_smmu 0x0c2c 0x20>,
+							 <&apps_smmu 0x0c0c 0x40>,
+							 <&apps_smmu 0x19cc 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x196d 0x0>,
+							 <&apps_smmu 0x0c0d 0x20>,
+							 <&apps_smmu 0x0c2e 0x0>,
+							 <&apps_smmu 0x0c4d 0x0>,
+							 <&apps_smmu 0x19cd 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x196e 0x0>,
+							 <&apps_smmu 0x0c0e 0x20>,
+							 <&apps_smmu 0x19ce 0x0>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
new file mode 100644
index 000000000000..d1dbfa3bd81c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi
@@ -0,0 +1,4792 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,qcs615-camcc.h>
+#include <dt-bindings/clock/qcom,qcs615-dispcc.h>
+#include <dt-bindings/clock/qcom,qcs615-gcc.h>
+#include <dt-bindings/clock/qcom,qcs615-gpucc.h>
+#include <dt-bindings/clock/qcom,qcs615-videocc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_0>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+
+			l2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_100>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+
+			l2_100: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_200>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+
+			l2_200: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_300>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+
+			l2_300: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd4>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_400>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+
+			l2_400: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd5>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&l2_500>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+
+			l2_500: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd6>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1740>;
+			dynamic-power-coefficient = <404>;
+			next-level-cache = <&l2_600>;
+			clocks = <&cpufreq_hw 1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+
+			l2_600: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			power-domains = <&cpu_pd7>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1740>;
+			dynamic-power-coefficient = <404>;
+			next-level-cache = <&l2_700>;
+			clocks = <&cpufreq_hw 1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+
+			l2_700: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			      cache-unified;
+			      next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 4) (300000 * 16)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(300000 * 4) (576000 * 16)>;
+		};
+
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <(300000 * 4) (576000 * 16)>;
+		};
+
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+			opp-peak-kBps = <(451000 * 4) (806400 * 16)>;
+		};
+
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(547000 * 4) (1017600 * 16)>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <(768000 * 4) (1209600 * 16)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(768000 * 4) (1209600 * 16)>;
+		};
+
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-peak-kBps = <(1017000 * 4) (1363200 * 16)>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(451000 * 4) (300000 * 16)>;
+		};
+
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <(451000 * 4) (576000 * 16)>;
+		};
+
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <(451000 * 4) (576000 * 16)>;
+		};
+
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <(547000 * 4) (806400 * 16)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(547000 * 4) (806400 * 16)>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <109440000>;
+			opp-peak-kBps = <(1017600 * 4) (940800 * 16)>;
+		};
+
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(1017600 * 4) (1017600 * 16)>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <(1555000 * 4) (1209600 * 16)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1555000 * 4) (1209600 * 16)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(1555000 * 4) (1363200 * 16)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(1555000 * 4) (1363200 * 16)>;
+		};
+	};
+
+	dummy_eud: dummy-sink {
+		compatible = "arm,coresight-dummy-sink";
+
+		in-ports {
+			port {
+				eud_in: endpoint {
+					remote-endpoint = <&replicator_swao_out1>;
+				};
+			};
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+
+		little_cpu_sleep_0: cpu-sleep-0-0 {
+			compatible = "arm,idle-state";
+			idle-state-name = "silver-power-collapse";
+			arm,psci-suspend-param = <0x40000003>;
+			entry-latency-us = <549>;
+			exit-latency-us = <901>;
+			min-residency-us = <1774>;
+			local-timer-stop;
+		};
+
+		little_cpu_sleep_1: cpu-sleep-0-1 {
+			compatible = "arm,idle-state";
+			idle-state-name = "silver-rail-power-collapse";
+			arm,psci-suspend-param = <0x40000004>;
+			entry-latency-us = <702>;
+			exit-latency-us = <915>;
+			min-residency-us = <4001>;
+			local-timer-stop;
+		};
+
+		big_cpu_sleep_0: cpu-sleep-1-0 {
+			compatible = "arm,idle-state";
+			idle-state-name = "gold-power-collapse";
+			arm,psci-suspend-param = <0x40000003>;
+			entry-latency-us = <523>;
+			exit-latency-us = <1244>;
+			min-residency-us = <2207>;
+			local-timer-stop;
+		};
+
+		big_cpu_sleep_1: cpu-sleep-1-1 {
+			compatible = "arm,idle-state";
+			idle-state-name = "gold-rail-power-collapse";
+			arm,psci-suspend-param = <0x40000004>;
+			entry-latency-us = <526>;
+			exit-latency-us = <1854>;
+			min-residency-us = <5555>;
+			local-timer-stop;
+		};
+	};
+
+	domain-idle-states {
+		cluster_sleep_0: cluster-sleep-0 {
+			compatible = "domain-idle-state";
+			arm,psci-suspend-param = <0x41000044>;
+			entry-latency-us = <2752>;
+			exit-latency-us = <3048>;
+			min-residency-us = <6118>;
+		};
+
+		cluster_sleep_1: cluster-sleep-1 {
+			compatible = "domain-idle-state";
+			arm,psci-suspend-param = <0x41001344>;
+			entry-latency-us = <3263>;
+			exit-latency-us = <4562>;
+			min-residency-us = <8467>;
+		};
+
+		cluster_sleep_2: cluster-sleep-2 {
+			compatible = "domain-idle-state";
+			arm,psci-suspend-param = <0x4100b344>;
+			entry-latency-us = <3638>;
+			exit-latency-us = <6562>;
+			min-residency-us = <9826>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-qcs615", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
+		};
+	};
+
+	camnoc_virt: interconnect-0 {
+		compatible = "qcom,qcs615-camnoc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	ipa_virt: interconnect-1 {
+		compatible = "qcom,qcs615-ipa-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-2 {
+		compatible = "qcom,qcs615-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+		/* On this platform, bit 26 (normally SLPI) is repurposed for ADSP */
+		mboxes = <&apss_shared 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu_pd0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
+		};
+
+		cpu_pd6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cpu_pd7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+		};
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0
+					      &cluster_sleep_1
+					      &cluster_sleep_2>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: aop-cmd-db@85f20000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x85f20000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_region: smem@86000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		pil_video_mem: pil-video@93400000 {
+			reg = <0x0 0x93400000 0x0 0x500000>;
+			no-map;
+		};
+
+		rproc_cdsp_mem: rproc-cdsp@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		rproc_adsp_mem: rproc-adsp@95900000 {
+			reg = <0x0 0x95900000 0x0 0x1e00000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,qcs615-gcc";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		qfprom: efuse@780000 {
+			compatible = "qcom,qcs615-qfprom", "qcom,qfprom";
+			reg = <0x0 0x00780000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@1f8 {
+				reg = <0x1fb 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		rng@793000 {
+			compatible = "qcom,qcs615-trng", "qcom,trng";
+			reg = <0x0 0x00793000 0x0 0x1000>;
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x007c4000 0x0 0x1000>,
+			      <0x0 0x007c5000 0x0 0x1000>,
+			      <0x0 0x007c8000 0x0 0x8000>;
+			reg-names = "hc",
+				    "cqhci",
+				    "ice";
+
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo",
+				      "ice";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x02c0 0x0>;
+			interconnects = <&aggre1_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040868>;
+			supports-cqe;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@800000  {
+			compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0x0 0x800000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <8>;
+			dma-channel-mask = <0xf>;
+			iommus = <&apps_smmu 0xd6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			iommus = <&apps_smmu 0xc3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_tx>, <&qup_uart0_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x884000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x888000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>,
+					    <&qup_uart2_tx>, <&qup_uart2_rx>;
+				pinctrl-names = "default";
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x88c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <8>;
+			dma-channel-mask = <0xf>;
+			iommus = <&apps_smmu 0x376 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			iommus = <&apps_smmu 0x363 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			i2c4: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>,
+					    <&qup_uart4_tx>, <&qup_uart4_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart6: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>,
+					    <&qup_uart6_tx>, <&qup_uart6_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			spi7: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+				status = "disabled";
+			};
+
+			uart7: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>,
+					    <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			reg = <0x0 0x01500000 0x0 0x5080>;
+			compatible = "qcom,qcs615-config-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			reg = <0x0 0x01620000 0x0 0x1f300>;
+			compatible = "qcom,qcs615-system-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@1700000 {
+			reg = <0x0 0x01700000 0x0 0x3f200>;
+			compatible = "qcom,qcs615-aggre1-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			reg = <0x0 0x01740000 0x0 0x1c100>;
+			compatible = "qcom,qcs615-mmss-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-qcs615", "qcom,pcie-sm8150";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01c0b000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+			num-lanes = <1>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a";
+			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre1_noc MASTER_PCIE QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0 &apps_smmu 0x400 0x1>,
+				    <0x100 &apps_smmu 0x401 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie_phy>;
+			phy-names = "pciephy";
+
+			max-link-speed = <2>;
+
+			operating-points-v2 = <&pcie_opp_table>;
+
+			status = "disabled";
+
+			pcie_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+			};
+
+			pcie_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+				bus-range = <0x01 0xff>;
+			};
+		};
+
+		pcie_phy: phy@1c0e000 {
+			compatible = "qcom,qcs615-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,qcs615-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>,
+			      <0x0 0x01d90000 0x0 0x8000>;
+			reg-names = "std",
+				    "ice";
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			operating-points-v2 = <&ufs_opp_table>;
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0x300 0x0>;
+			dma-coherent;
+
+			lanes-per-direction = <1>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,qcs615-qmp-ufs-phy", "qcom,sm6115-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <16>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x0104 0x0011>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,qcs615-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x0104 0x0011>;
+			interconnects = <&aggre1_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,qcs615-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,qcs615-tlmm";
+			reg = <0x0 0x03100000 0x0 0x300000>,
+			      <0x0 0x03500000 0x0 0x300000>,
+			      <0x0 0x03d00000 0x0 0x300000>;
+			reg-names = "east",
+				    "west",
+				    "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 124>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio4", "gpio5";
+				function = "qup0";
+
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio18", "gpio19";
+				function = "qup0";
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio20", "gpio21";
+				function = "qup1";
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio14", "gpio15";
+				function = "qup1";
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio6", "gpio7";
+				function = "qup1";
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				pins = "gpio10", "gpio11";
+				function = "qup1";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio3";
+				function = "qup0";
+			};
+
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup1";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio23";
+				function = "qup1";
+			};
+
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
+				pins = "gpio23";
+				function = "gpio";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio6", "gpio7", "gpio8";
+				function = "qup1";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio9";
+				function = "qup1";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio9";
+				function = "gpio";
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				pins = "gpio10", "gpio11", "gpio12";
+				function = "qup1";
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio13";
+				function = "qup1";
+			};
+
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
+				pins = "gpio13";
+				function = "gpio";
+			};
+
+			qup_uart0_tx: qup-uart0-tx-state {
+				pins = "gpio16";
+				function = "qup0";
+			};
+
+			qup_uart0_rx: qup-uart0-rx-state {
+				pins = "gpio17";
+				function = "qup0";
+			};
+
+			qup_uart2_cts: qup-uart2-cts-state {
+				pins = "gpio0";
+				function = "qup0";
+			};
+
+			qup_uart2_rts: qup-uart2-rts-state {
+				pins = "gpio1";
+				function = "qup0";
+			};
+
+			qup_uart2_tx: qup-uart2-tx-state {
+				pins = "gpio2";
+				function = "qup0";
+			};
+
+			qup_uart2_rx: qup-uart2-rx-state {
+				pins = "gpio3";
+				function = "qup0";
+			};
+
+			qup_uart4_cts: qup-uart4-cts-state {
+				pins = "gpio20";
+				function = "qup1";
+			};
+
+			qup_uart4_rts: qup-uart4-rts-state {
+				pins = "gpio21";
+				function = "qup1";
+			};
+
+			qup_uart4_tx: qup-uart4-tx-state {
+				pins = "gpio22";
+				function = "qup1";
+			};
+
+			qup_uart4_rx: qup-uart4-rx-state {
+				pins = "gpio23";
+				function = "qup1";
+			};
+
+			qup_uart6_cts: qup-uart6-cts-state {
+				pins = "gpio6";
+				function = "qup1";
+			};
+
+			qup_uart6_rts: qup-uart6-rts-state {
+				pins = "gpio7";
+				function = "qup1";
+			};
+
+			qup_uart6_tx: qup-uart6-tx-state {
+				pins = "gpio8";
+				function = "qup1";
+			};
+
+			qup_uart6_rx: qup-uart6-rx-state {
+				pins = "gpio9";
+				function = "qup1";
+			};
+
+			qup_uart7_cts: qup-uart7-cts-state {
+				pins = "gpio10";
+				function = "qup1";
+			};
+
+			qup_uart7_rts: qup-uart7-rts-state {
+				pins = "gpio11";
+				function = "qup1";
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio12";
+				function = "qup1";
+			};
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio13";
+				function = "qup1";
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,qcs615-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GPLL0>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x06002000 0x0 0x1000>,
+			      <0x0 0x16280000 0x0 0x180000>;
+			reg-names = "stm-base",
+				    "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel_in0_in7>;
+					};
+				};
+			};
+		};
+
+		tpda@6004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x06004000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					tpda_qdss_in0: endpoint {
+						remote-endpoint = <&tpdm_center_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					tpda_qdss_in4: endpoint {
+						remote-endpoint = <&funnel_monaq_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					tpda_qdss_in5: endpoint {
+						remote-endpoint = <&funnel_ddr_0_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					tpda_qdss_in6: endpoint {
+						remote-endpoint = <&funnel_turing_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					tpda_qdss_in7: endpoint {
+						remote-endpoint = <&tpdm_vsense_out>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+
+					tpda_qdss_in8: endpoint {
+						remote-endpoint = <&tpdm_dcc_out>;
+					};
+				};
+
+				port@9 {
+					reg = <9>;
+
+					tpda_qdss_in9: endpoint {
+						remote-endpoint = <&tpdm_prng_out>;
+					};
+				};
+
+				port@b {
+					reg = <11>;
+
+					tpda_qdss_in11: endpoint {
+						remote-endpoint = <&tpdm_qm_out>;
+					};
+				};
+
+				port@c {
+					reg = <12>;
+
+					tpda_qdss_in12: endpoint {
+						remote-endpoint = <&tpdm_west_out>;
+					};
+				};
+
+				port@d {
+					reg = <13>;
+
+					tpda_qdss_in13: endpoint {
+						remote-endpoint = <&tpdm_pimem_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_qdss_out: endpoint {
+						remote-endpoint = <&funnel_qatb_in>;
+					};
+				};
+			};
+		};
+
+		funnel@6005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06005000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					funnel_qatb_in: endpoint {
+						remote-endpoint = <&tpda_qdss_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_qatb_out: endpoint {
+						remote-endpoint = <&funnel_in0_in6>;
+					};
+				};
+			};
+		};
+
+		cti@6010000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06010000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6011000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06011000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6012000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06012000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6013000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06013000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6014000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06014000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6015000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06015000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6016000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06016000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6017000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06017000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6018000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06018000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6019000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06019000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601a000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601c000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601d000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601e000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601e000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@601f000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0601f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06041000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					funnel_in0_in6: endpoint {
+						remote-endpoint = <&funnel_qatb_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel_in0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_in0_out: endpoint {
+						remote-endpoint = <&funnel_merg_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@3 {
+					reg = <3>;
+
+					funnel_in1_in3: endpoint {
+						remote-endpoint = <&replicator_swao_out0>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					funnel_in1_in4: endpoint {
+						remote-endpoint = <&tpdm_wcss_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel_in1_in7: endpoint {
+						remote-endpoint = <&funnel_apss_merg_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_in1_out: endpoint {
+						remote-endpoint = <&funnel_merg_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					funnel_merg_in0: endpoint {
+						remote-endpoint = <&funnel_in0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					funnel_merg_in1: endpoint {
+						remote-endpoint = <&funnel_in1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_merg_out: endpoint {
+						remote-endpoint = <&tmc_etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x06046000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator0_in: endpoint {
+						remote-endpoint = <&tmc_etf_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					replicator0_out1: endpoint {
+						remote-endpoint = <&replicator1_in>;
+					};
+				};
+			};
+		};
+
+		tmc@6047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x06047000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmc_etf_in: endpoint {
+						remote-endpoint = <&funnel_merg_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tmc_etf_out: endpoint {
+						remote-endpoint = <&replicator0_in>;
+					};
+				};
+			};
+		};
+
+		replicator@604a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x0604a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					replicator1_in: endpoint {
+						remote-endpoint = <&replicator0_out1>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					replicator1_out: endpoint {
+						remote-endpoint = <&funnel_swao_in6>;
+					};
+				};
+			};
+		};
+
+		cti@683b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0683b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@6840000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06840000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_vsense_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@684c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x0684c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_prng_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in9>;
+					};
+				};
+			};
+		};
+
+		tpdm@6850000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06850000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_pimem_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in13>;
+					};
+				};
+			};
+		};
+
+		tpdm@6860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_turing_out: endpoint {
+						remote-endpoint = <&funnel_turing_in>;
+					};
+				};
+			};
+		};
+
+		funnel@6861000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06861000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					funnel_turing_in: endpoint {
+						remote-endpoint = <&tpdm_turing_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_turing_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in6>;
+					};
+				};
+			};
+		};
+
+		cti@6867000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06867000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@6870000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06870000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_dcc_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in8>;
+					};
+				};
+			};
+		};
+
+		tpdm@699c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x0699c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_wcss_out: endpoint {
+						remote-endpoint = <&funnel_in1_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@69c0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x069c0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_monaq_out: endpoint {
+						remote-endpoint = <&funnel_monaq_in>;
+					};
+				};
+			};
+		};
+
+		funnel@69c3000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x069c3000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					funnel_monaq_in: endpoint {
+						remote-endpoint = <&tpdm_monaq_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_monaq_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in4>;
+					};
+				};
+			};
+		};
+
+		tpdm@69d0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x069d0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_qm_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in11>;
+					};
+				};
+			};
+		};
+
+		tpdm@6a00000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06a00000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_ddr_out: endpoint {
+						remote-endpoint = <&funnel_ddr_0_in>;
+					};
+				};
+			};
+		};
+
+		cti@6a02000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06a02000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6a03000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06a03000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6a10000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06a10000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6a11000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06a11000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		funnel@6a05000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06a05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					funnel_ddr_0_in: endpoint {
+						remote-endpoint = <&tpdm_ddr_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_ddr_0_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in5>;
+					};
+				};
+			};
+		};
+
+		tpda@6b01000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x06b01000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					tpda_swao_in0: endpoint {
+						remote-endpoint = <&tpdm_swao0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					tpda_swao_in1: endpoint {
+						remote-endpoint = <&tpdm_swao1_out>;
+					};
+
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_swao_out: endpoint {
+						remote-endpoint = <&funnel_swao_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@6b02000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b02000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_swao0_out: endpoint {
+						remote-endpoint = <&tpda_swao_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@6b03000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b03000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+			status = "disabled";
+
+			out-ports {
+				port {
+					tpdm_swao1_out: endpoint {
+						remote-endpoint = <&tpda_swao_in1>;
+					};
+				};
+			};
+		};
+
+		cti@6b04000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6b05000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6b06000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b06000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6b07000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b07000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		funnel@6b08000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x06b08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+
+					funnel_swao_in6: endpoint {
+						remote-endpoint = <&replicator1_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel_swao_in7: endpoint {
+						remote-endpoint = <&tpda_swao_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_swao_out: endpoint {
+						remote-endpoint = <&tmc_etf_swao_in>;
+					};
+				};
+			};
+		};
+
+		tmc@6b09000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x06b09000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tmc_etf_swao_in: endpoint {
+						remote-endpoint = <&funnel_swao_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tmc_etf_swao_out: endpoint {
+						remote-endpoint = <&replicator_swao_in>;
+					};
+				};
+			};
+		};
+
+		replicator@6b0a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x06b0a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_swao_in: endpoint {
+						remote-endpoint = <&tmc_etf_swao_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					replicator_swao_out0: endpoint {
+						remote-endpoint = <&funnel_in1_in3>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					replicator_swao_out1: endpoint {
+						remote-endpoint = <&eud_in>;
+					};
+				};
+			};
+		};
+
+		cti@6b21000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06b21000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		tpdm@6b48000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06b48000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_west_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in12>;
+					};
+				};
+			};
+		};
+
+		cti@6c13000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06c13000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			/* Not all required clocks can be enabled from the OS */
+			status = "fail";
+		};
+
+		cti@6c20000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06c20000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		tpdm@6c28000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x06c28000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_center_out: endpoint {
+						remote-endpoint = <&tpda_qdss_in0>;
+					};
+				};
+			};
+		};
+
+		cti@6c29000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06c29000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@6c2a000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x06c2a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@7020000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07020000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7040000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07040000 0x0 0x1000>;
+			cpu = <&cpu0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel_apss_in0>;
+					};
+				};
+			};
+		};
+
+		cti@7120000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07120000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7140000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07140000 0x0 0x1000>;
+			cpu = <&cpu1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel_apss_in1>;
+					};
+				};
+			};
+		};
+
+		cti@7220000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07220000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7240000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07240000 0x0 0x1000>;
+			cpu = <&cpu2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel_apss_in2>;
+					};
+				};
+			};
+		};
+
+		cti@7320000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07320000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7340000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07340000 0x0 0x1000>;
+			cpu = <&cpu3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel_apss_in3>;
+					};
+				};
+			};
+		};
+
+		cti@7420000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07420000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7440000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07440000 0x0 0x1000>;
+			cpu = <&cpu4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&funnel_apss_in4>;
+					};
+				};
+			};
+		};
+
+		cti@7520000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07520000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7540000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07540000 0x0 0x1000>;
+			cpu = <&cpu5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&funnel_apss_in5>;
+					};
+				};
+			};
+		};
+
+		cti@7620000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07620000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7640000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07640000 0x0 0x1000>;
+			cpu = <&cpu6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&funnel_apss_in6>;
+					};
+				};
+			};
+		};
+
+		cti@7720000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07720000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@7740000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x07740000 0x0 0x1000>;
+			cpu = <&cpu7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&funnel_apss_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x07800000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					funnel_apss_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					funnel_apss_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					funnel_apss_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					funnel_apss_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					funnel_apss_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					funnel_apss_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+
+					funnel_apss_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+
+					funnel_apss_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_apss_out: endpoint {
+						remote-endpoint = <&funnel_apss_merg_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x07810000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					funnel_apss_merg_in0: endpoint {
+						remote-endpoint = <&funnel_apss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					funnel_apss_merg_in2: endpoint {
+						remote-endpoint = <&tpda_olc_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					funnel_apss_merg_in3: endpoint {
+						remote-endpoint = <&tpda_llm_silver_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+
+					funnel_apss_merg_in4: endpoint {
+						remote-endpoint = <&tpda_llm_gold_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+
+					funnel_apss_merg_in5: endpoint {
+						remote-endpoint = <&tpda_apss_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_apss_merg_out: endpoint {
+						remote-endpoint = <&funnel_in1_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@7830000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x07830000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_olc_out: endpoint {
+						remote-endpoint = <&tpda_olc_in>;
+					};
+				};
+			};
+		};
+
+		tpda@7832000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x07832000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpda_olc_in: endpoint {
+						remote-endpoint = <&tpdm_olc_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_olc_out: endpoint {
+						remote-endpoint = <&funnel_apss_merg_in2>;
+					};
+				};
+			};
+		};
+
+		tpdm@7860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x07860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_apss_out: endpoint {
+						remote-endpoint = <&tpda_apss_in>;
+					};
+				};
+			};
+		};
+
+		tpda@7862000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x07862000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpda_apss_in: endpoint {
+						remote-endpoint = <&tpdm_apss_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_apss_out: endpoint {
+						remote-endpoint = <&funnel_apss_merg_in5>;
+					};
+				};
+			};
+		};
+
+		tpdm@78a0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x078a0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_llm_silver_out: endpoint {
+						remote-endpoint = <&tpda_llm_silver_in>;
+					};
+				};
+			};
+		};
+
+		tpdm@78b0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x078b0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					tpdm_llm_gold_out: endpoint {
+						remote-endpoint = <&tpda_llm_gold_in>;
+					};
+				};
+			};
+		};
+
+		tpda@78c0000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x078c0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpda_llm_silver_in: endpoint {
+						remote-endpoint = <&tpdm_llm_silver_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_llm_silver_out: endpoint {
+						remote-endpoint = <&funnel_apss_merg_in3>;
+					};
+				};
+			};
+		};
+
+		tpda@78d0000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x078d0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpda_llm_gold_in: endpoint {
+						remote-endpoint = <&tpdm_llm_gold_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					tpda_llm_gold_out: endpoint {
+						remote-endpoint = <&funnel_apss_merg_in4>;
+					};
+				};
+			};
+		};
+
+		cti@78e0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x078e0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@78f0000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x078f0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		cti@7900000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x07900000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		remoteproc_cdsp: remoteproc@8300000 {
+			compatible = "qcom,qcs615-cdsp-pas", "qcom,sm8150-cdsp-pas";
+			reg = <0x0 0x08300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			power-domain-names = "cx";
+
+			memory-region = <&rproc_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&apss_shared 4>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1081 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1082 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1083 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1084 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1085 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1086 0x0>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
+		pmu@90b6300 {
+			compatible = "qcom,qcs615-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x090b6300 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <12896000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <14928000>;
+				};
+			};
+		};
+
+		pmu@90cd000 {
+			compatible = "qcom,qcs615-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x090cd000 0x0 0x1000>;
+			interrupts = <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <800000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1200000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <1804800>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2188800>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <2726400>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <3072000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <4070400>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <5414400>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <6220800>;
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x08804000 0x0 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0x02a0 0x0>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre1_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		dc_noc: interconnect@9160000 {
+			reg = <0x0 0x09160000 0x0 0x3200>;
+			compatible = "qcom,qcs615-dc-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		llcc: system-cache-controller@9200000 {
+			compatible = "qcom,qcs615-llcc";
+			reg = <0x0 0x09200000 0x0 0x50000>,
+			      <0x0 0x09600000 0x0 0x50000>;
+			reg-names = "llcc0_base",
+				    "llcc_broadcast_base";
+		};
+
+		gem_noc: interconnect@9680000 {
+			reg = <0x0 0x09680000 0x0 0x3e200>;
+			compatible = "qcom,qcs615-gem-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,qcs615-venus", "qcom,sc7180-venus";
+			reg = <0x0 0x0aa00000 0x0 0x100000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "bus",
+				      "vcodec0_core",
+				      "vcodec0_bus";
+
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>,
+					<&rpmhpd RPMHPD_CX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "cx";
+
+			operating-points-v2 = <&venus_opp_table>;
+
+			interconnects = <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "video-mem",
+					     "cpu-cfg";
+
+			iommus = <&apps_smmu 0xe60 0x20>;
+
+			memory-region = <&pil_video_mem>;
+
+			status = "disabled";
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133330000 {
+					opp-hz = /bits/ 64 <133330000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-410000000 {
+					opp-hz = /bits/ 64 <410000000>;
+					required-opps = <&rpmhpd_opp_nom_l1>;
+				};
+
+				opp-460000000 {
+					opp-hz = /bits/ 64 <460000000>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,qcs615-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,qcs615-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm6150-mdss";
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
+			power-domains = <&dispcc MDSS_CORE_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x800 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm6150-dpu";
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				interrupts-extended = <&mdss 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf0_out: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm6150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,sm6150-dsi-phy-14nm";
+				reg = <0x0 0x0ae94400 0x0 0x100>,
+				      <0x0 0x0ae94500 0x0 0x300>,
+				      <0x0 0x0ae94800 0x0 0x124>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,qcs615-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,qcs615-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,qcs615-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
+		sram@14680000 {
+			compatible = "qcom,qcs615-imem", "syscon", "simple-mfd";
+			reg = <0x0 0x14680000 0x0 0x2c000>;
+			ranges = <0 0 0x14680000 0x2c000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@2a94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x2a94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,qcs615-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			dma-coherent;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <0>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		apss_shared: mailbox@17c00000 {
+			compatible = "qcom,qcs615-apss-shared",
+				     "qcom,sdm845-apss-shared";
+			reg = <0x0 0x17c00000 0x0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog: watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-qcs615", "qcom,kpss-wdt";
+			reg = <0x0 0x17c10000 0x0 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c27000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			qcom,drv-id = <2>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,tcs-config = <ACTIVE_TCS    2>,
+					  <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>,
+					  <CONTROL_TCS   1>;
+
+			label = "apps_rsc";
+			power-domains = <&cluster_pd>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,qcs615-rpmh-clk";
+				clocks = <&xo_board_clk>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qcs615-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-0 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp-2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp-3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,qcs615-osm-l3", "qcom,sm8150-osm-l3", "qcom,osm-l3";
+			reg = <0x0 0x18321000 0x0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,qcs615-qusb2-phy";
+			reg = <0x0 0x88e2000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_WEST_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_hsphy_2: phy@88e3000 {
+			compatible = "qcom,qcs615-qusb2-phy";
+			reg = <0x0 0x088e3000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_WEST_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@88e6000 {
+			compatible = "qcom,qcs615-qmp-usb3-phy";
+			reg = <0x0 0x88e6000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_AHB2PHY_WEST_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			qcom,tcsr-reg = <&tcsr 0xb244>;
+
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,qcs615-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+
+				iommus = <&apps_smmu 0x140 0x0>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+			};
+		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,qcs615-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a8f8800 0x0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_SEC_AXI_CLK>,
+				 <&gcc GCC_USB20_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_SEC_AXI_CLK>,
+				 <&gcc GCC_USB20_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB20_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB2_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB20_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc USB20_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB20_SEC_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a800000 0x0 0xcd00>;
+
+				iommus = <&apps_smmu 0xe0 0x0>;
+				interrupts = <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>;
+
+				phys = <&usb_hsphy_2>;
+				phy-names = "usb2-phy";
+
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+
+				maximum-speed = "high-speed";
+			};
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,qcs615-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1000>,
+			      <0x0 0x0c222000 0x0 0x1000>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		remoteproc_adsp: remoteproc@62400000 {
+			compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas";
+			reg = <0x0 0x62400000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			power-domain-names = "cx";
+
+			memory-region = <&rproc_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink_edge: glink-edge {
+				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&apss_shared 24>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1723 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1724 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1725 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1726 0x0>;
+						qcom,nsessions = <5>;
+						dma-coherent;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,qcs615-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	arch_timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	thermal-zones {
+		aoss-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-0-thermal {
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpuss0-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-1-thermal {
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpuss1-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-2-thermal {
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpuss2-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-3-thermal {
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpuss3-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-0-thermal {
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-1-thermal {
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-2-thermal {
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-3-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				gpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				q6-hvx-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				mdm-core-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				camera-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wlan-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				wlan-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		display-thermal {
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				display-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				video-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
new file mode 100644
index 000000000000..8e5c5575a532
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
@@ -0,0 +1,1486 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "hamoa-pmics.dtsi"
+
+/ {
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			label = "lid";
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&cam_indicator_en>;
+		pinctrl-names = "default";
+
+		led-camera-indicator {
+			label = "white:camera-indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			/* Reuse as a panic indicator until we get a "camera on" trigger */
+			panic-indicator;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Left-side display-adjacent port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side user-adjacent port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-ASUS-Zenbook-A14";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS1",
+				"VA DMIC1", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>,
+					    <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>,
+					    <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>,
+					    <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vreg_vph_pwr>;
+		vdd-bob2-supply = <&vreg_vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vreg_vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+		vdd-s2-supply = <&vreg_vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vreg_vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p9: ldo1 {
+			regulator-name = "vreg_l1j_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ELAN, 04F3:3315 */
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* Left-side display-adjacent port */
+	typec-mux@8 {
+		compatible = "parade,ps8833", "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ASUSTeK, 0B05:4543 */
+	hdtl@17 {
+		compatible = "hid-over-i2c";
+		reg = <0x17>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&hdtl_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	/* EC @0x5b */
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* Left-side user-adjacent port */
+	typec-mux@8 {
+		compatible = "parade,ps8833", "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ASUSTeK, 0B05:0220 */
+	keyboard@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel: panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>;
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>;
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-disable;
+		input-disable;
+		output-enable;
+		drive-push-pull;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>;
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>;
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&spi10 {
+	status = "disabled";
+
+	/* Unknown device */
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>,  /* SPI11, TZ Protected */
+			       <90 1>;	/* Unknown, TZ Protected */
+
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	hdtl_default: hdtl-default-state {
+		pins = "gpio95";
+		function = "gpio";
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_bt_en: wcn-bt-en-state {
+		pins = "gpio116";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_en: wcn-wlan-en-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+
+	status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p9>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p9>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
new file mode 100644
index 000000000000..ded96fb43489
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -0,0 +1,1818 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "hamoa-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>, <&kypd_vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "volume_up";
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		switch-lid {
+			label = "lid";
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		nvmem-cells = <&charge_limit_en>,
+			      <&charge_limit_end>,
+			      <&charge_limit_delta>;
+		nvmem-cell-names = "charge_limit_en",
+				   "charge_limit_end",
+				   "charge_limit_delta";
+
+		/* Left-side rear port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side front port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Right-side port */
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-CRD";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+
+		#phy-cells = <0>;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "samsung,atna45af01", "samsung,atna33xc20";
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	kypd_vol_up_n: kypd-vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-pull-up;
+		input-enable;
+	};
+
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-disable;
+		output-enable;
+		drive-push-pull;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/adsp.mbn",
+			"qcom/x1e80100/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/cdsp.mbn",
+			"qcom/x1e80100/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&retimer_ss2_ss_in>;
+};
+
+&usb_mp {
+	/* Only second port is used with USB 2.0 maximum speed */
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
new file mode 100644
index 000000000000..bf04a12b16bc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
@@ -0,0 +1,1667 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ * Copyright (c) 2025 Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "hamoa-pmics.dtsi"
+
+/ {
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <40000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Display-adjacent port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* User-adjacent port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&cam_indicator_en>;
+		pinctrl-names = "default";
+
+		led-camera-indicator {
+			label = "white:camera-indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			/* Reuse as a panic indicator until we get a "camera on" trigger */
+			panic-indicator;
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound: sound {
+		compatible = "qcom,x1e80100-sndcard";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK1 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS1",
+				"VA DMIC1", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_cam_1p8: regulator-cam-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_CAM_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&cam_ldo_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	keyboard@5 {
+		compatible = "hid-over-i2c";
+		reg = <0x5>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8833", "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* EC @0x3b */
+
+	/* Type A Port */
+	eusb3_typea_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	/* Fingerprint scanner */
+	eusb5_frp_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8833", "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&i2c20 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			enable-gpios = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l6b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>,  /* SPI11 (TPM) */
+			       <76 4>,  /* SPI19 (TZ Protected) */
+			       <238 1>; /* UFS Reset */
+
+	cam_rgb_default: cam-rgb-default-state {
+		mclk-pins {
+			pins = "gpio100";
+			function = "cam_aon";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio237";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cam_ldo_en: cam-ldo-en-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio74";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	tpad_default: tpad-default-state {
+		disable-pins {
+			pins = "gpio38";
+			function = "gpio";
+			output-high;
+		};
+
+		int-n-pins {
+			pins = "gpio3";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio52";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		disable-pins {
+			pins = "gpio75";
+			function = "gpio";
+			output-high;
+		};
+
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			/* Technically should be High-Z input */
+			pins = "gpio48";
+			function = "gpio";
+			output-low;
+			drive-strength = <2>;
+		};
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb5_frp_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_typea_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-el2.dtso b/arch/arm64/boot/dts/qcom/x1-el2.dtso
new file mode 100644
index 000000000000..2d1c9151cf1b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-el2.dtso
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * x1 specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */
+&gpu_zap_shader {
+	status = "disabled";
+};
+
+&iris {
+	/* TODO: Add video-firmware iommus to start IRIS from EL2 */
+	status = "disabled";
+};
+
+/*
+ * When running under Gunyah, this IOMMU is controlled by the firmware,
+ * however when we take ownership of it in EL2, we need to configure
+ * it properly to use PCIe.
+ *
+ * Additionally, it seems like ITS emulation in Gunyah is broken so we
+ * can't use MSI on some PCIe controllers in EL1. But we can add them
+ * here for EL2.
+ */
+&pcie3 {
+	iommu-map = <0 &pcie_smmu 0x30000 0x10000>;
+	msi-map = <0 &gic_its 0xb0000 0x10000>;
+};
+
+&pcie4 {
+	iommu-map = <0 &pcie_smmu 0x40000 0x10000>;
+};
+
+&pcie5 {
+	iommu-map = <0 &pcie_smmu 0x50000 0x10000>;
+	msi-map = <0 &gic_its 0xd0000 0x10000>;
+};
+
+&pcie6a {
+	iommu-map = <0 &pcie_smmu 0x60000 0x10000>;
+};
+
+&pcie_smmu {
+	status = "okay";
+};
+
+/*
+ * The "SBSA watchdog" is implemented in software in Gunyah
+ * and can't be used when running in EL2.
+ */
+&sbsa_watchdog {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
new file mode 100644
index 000000000000..a4075434162a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
@@ -0,0 +1,1544 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/ {
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 5000000>;
+
+		brightness-levels = <0 2048 4096 8192 16384 65535>;
+		num-interpolated-steps = <20>;
+		default-brightness-level = <80>;
+
+		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+		pinctrl-names = "default";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Left-side port, closer to the screen */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side port, farther from the screen */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound: sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-HP-OMNIBOOK-X14";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS3",
+				"VA DMIC1", "VA MIC BIAS3",
+				"VA DMIC2", "VA MIC BIAS1",
+				"VA DMIC3", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg_vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the CRD mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_wcn_1p9>;
+		vddpcie1p3-supply = <&vreg_wcn_1p9>;
+		vddpcie1p9-supply = <&vreg_wcn_1p9>;
+		vddpmu-supply = <&vreg_wcn_0p95>;
+		vddpmumx-supply = <&vreg_wcn_0p95>;
+		vddpmucx-supply = <&vreg_wcn_0p95>;
+		vddrfa0p95-supply = <&vreg_wcn_0p95>;
+		vddrfa1p3-supply = <&vreg_wcn_1p9>;
+		vddrfa1p9-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
+
+	usb-1-ss1-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vreg_vph_pwr>;
+		vdd-bob2-supply = <&vreg_vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vreg_vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+		vdd-s2-supply = <&vreg_vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vreg_vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			backlight = <&backlight>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		drive-push-pull;
+		input-disable;
+		output-enable;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		input-disable;
+		output-enable;
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
+		function = "normal";
+	};
+
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmk8550_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio5";
+		function = "func3";
+	};
+};
+
+&pmk8550_pwm {
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <72 2>, /* Secure EC I2C connection (?) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+		mode-pins {
+			pins = "gpio177";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio178";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+		max-speed = <3200000>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_dwc3 {
+	phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>;
+	phy-names = "usb2-0", "usb3-0";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
new file mode 100644
index 000000000000..a9643cd746d5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -0,0 +1,1500 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "hamoa.dtsi"
+#include "hamoa-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E001DE Snapdragon Devkit for Windows";
+	compatible = "qcom,x1e001de-devkit", "qcom,x1e001de", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		/* Back panel port closer to the RJ45 connector */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Back panel port closer to the audio jack */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "host";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Front panel port */
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "host";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E001DE-DEVKIT";
+		audio-routing = "IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr2_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr2_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr2_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcdxkmsuc8380.mbn";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_en: usb0-pwr-1p15-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcadsp8380.mbn",
+			"qcom/x1e80100/Thundercomm/DEVKIT/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qccdsp8380.mbn",
+			"qcom/x1e80100/Thundercomm/DEVKIT/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l6b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>; /* SPI (TPM) */
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_1p15_reg_en: rtmr2-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_1p8_reg_en: rtmr2-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_3p3_reg_en: rtmr2-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&retimer_ss2_ss_in>;
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
new file mode 100644
index 000000000000..d524afa12d19
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Linaro Limited
+ */
+
+#include "x1e78100-lenovo-thinkpad-t14s.dtsi"
+
+/ {
+	model = "Lenovo ThinkPad T14s Gen 6 (OLED)";
+	compatible = "lenovo,thinkpad-t14s-oled", "lenovo,thinkpad-t14s",
+		     "qcom,x1e78100", "qcom,x1e80100";
+};
+
+&panel {
+	compatible = "samsung,atna40yk20", "samsung,atna33xc20";
+	enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&edp_bl_en>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
index 975550139e10..5cc6a63d1ef6 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
@@ -1,810 +1,60 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
- * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
- * Copyright (c) 2024, Linaro Limited
+ * Copyright (c) 2025, Linaro Limited
  */
 
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
+#include "x1e78100-lenovo-thinkpad-t14s.dtsi"
 
 / {
-	model = "Lenovo ThinkPad T14s Gen 6";
-	compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100";
-	chassis-type = "laptop";
+	model = "Lenovo ThinkPad T14s Gen 6 (LCD)";
+	compatible = "lenovo,thinkpad-t14s-lcd", "lenovo,thinkpad-t14s",
+		     "qcom,x1e78100", "qcom,x1e80100";
 
-	gpio-keys {
-		compatible = "gpio-keys";
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 4266537>;
+		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
 
-		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
 		pinctrl-names = "default";
-
-		switch-lid {
-			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			wakeup-source;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-		};
-	};
-
-	pmic-glink {
-		compatible = "qcom,x1e80100-pmic-glink",
-			     "qcom,sm8550-pmic-glink",
-			     "qcom,pmic-glink";
-		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
-				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Display-adjacent port */
-		connector@0 {
-			compatible = "usb-c-connector";
-			reg = <0>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss0_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
-					};
-				};
-			};
-		};
-
-		/* User-adjacent port */
-		connector@1 {
-			compatible = "usb-c-connector";
-			reg = <1>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss1_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
-					};
-				};
-			};
-		};
-	};
-
-	reserved-memory {
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x0 0x8000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-	vreg_edp_3p3: regulator-edp-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_EDP_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&edp_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
 	};
 
-	vreg_nvme: regulator-nvme {
+	vreg_edp_bl: regulator-edp-bl {
 		compatible = "regulator-fixed";
 
-		regulator-name = "VREG_NVME_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
 
-		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
-		pinctrl-0 = <&nvme_reg_en>;
 		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
 
 		regulator-boot-on;
 	};
-
-	vph_pwr: regulator-vph-pwr {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
 };
 
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm8550-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-bob1-supply = <&vph_pwr>;
-		vdd-bob2-supply = <&vph_pwr>;
-		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
-		vdd-l2-l13-l14-supply = <&vreg_bob1>;
-		vdd-l5-l16-supply = <&vreg_bob1>;
-		vdd-l6-l7-supply = <&vreg_bob2>;
-		vdd-l8-l9-supply = <&vreg_bob1>;
-		vdd-l12-supply = <&vreg_s5j_1p2>;
-		vdd-l15-supply = <&vreg_s4c_1p8>;
-		vdd-l17-supply = <&vreg_bob2>;
-
-		vreg_bob1: bob1 {
-			regulator-name = "vreg_bob1";
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_bob2: bob2 {
-			regulator-name = "vreg_bob2";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2b_3p0: ldo2 {
-			regulator-name = "vreg_l2b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4b_1p8: ldo4 {
-			regulator-name = "vreg_l4b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6b_1p8: ldo6 {
-			regulator-name = "vreg_l6b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b_3p0: ldo8 {
-			regulator-name = "vreg_l8b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9b_2p9: ldo9 {
-			regulator-name = "vreg_l9b_2p9";
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b_1p8: ldo10 {
-			regulator-name = "vreg_l10b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12b_1p2: ldo12 {
-			regulator-name = "vreg_l12b_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l13b_3p0: ldo13 {
-			regulator-name = "vreg_l13b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l14b_3p0: ldo14 {
-			regulator-name = "vreg_l14b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b_1p8: ldo15 {
-			regulator-name = "vreg_l15b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17b_2p5: ldo17 {
-			regulator-name = "vreg_l17b_2p5";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s4-supply = <&vph_pwr>;
-
-		vreg_s4c_1p8: smps4 {
-			regulator-name = "vreg_s4c_1p8";
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1c_1p2: ldo1 {
-			regulator-name = "vreg_l1c_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c_0p8: ldo2 {
-			regulator-name = "vreg_l2c_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c_0p8: ldo3 {
-			regulator-name = "vreg_l3c_0p8";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "d";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s4c_1p8>;
-		vdd-s1-supply = <&vph_pwr>;
-
-		vreg_l1d_0p8: ldo1 {
-			regulator-name = "vreg_l1d_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2d_0p9: ldo2 {
-			regulator-name = "vreg_l2d_0p9";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3d_1p8: ldo3 {
-			regulator-name = "vreg_l3d_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-3 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-
-		vreg_l2e_0p8: ldo2 {
-			regulator-name = "vreg_l2e_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3e_1p2: ldo3 {
-			regulator-name = "vreg_l3e_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-4 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "f";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-		vdd-s1-supply = <&vph_pwr>;
-
-		vreg_s1f_0p7: smps1 {
-			regulator-name = "vreg_s1f_0p7";
-			regulator-min-microvolt = <700000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-6 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "i";
-
-		vdd-l1-supply = <&vreg_s4c_1p8>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-
-		vreg_l1i_1p8: ldo1 {
-			regulator-name = "vreg_l1i_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2i_1p2: ldo2 {
-			regulator-name = "vreg_l2i_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3i_0p8: ldo3 {
-			regulator-name = "vreg_l3i_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-7 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "j";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s5-supply = <&vph_pwr>;
-
-		vreg_s5j_1p2: smps5 {
-			regulator-name = "vreg_s5j_1p2";
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1j_0p8: ldo1 {
-			regulator-name = "vreg_l1j_0p8";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2j_1p2: ldo2 {
-			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1256000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3j_0p8: ldo3 {
-			regulator-name = "vreg_l3j_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-};
-
-&gpu {
-	status = "okay";
-
-	zap-shader {
-		firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn";
-	};
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-
-	pinctrl-0 = <&qup_i2c0_data_clk>, <&tpad_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* ELAN06E2 or ELAN06E3 */
-	touchpad@15 {
-		compatible = "hid-over-i2c";
-		reg = <0x15>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
-		wakeup-source;
-	};
-
-	/* SYNA8022 or SYNA8024 */
-	touchpad@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
-
-		hid-descr-addr = <0x20>;
-		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
-		wakeup-source;
-	};
-
-	/* ELAN06F1 or SYNA06F2 */
-	keyboard@3a {
-		compatible = "hid-over-i2c";
-		reg = <0x3a>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-0 = <&kybd_default>;
-		pinctrl-names = "default";
-
-		wakeup-source;
-	};
-};
-
-&i2c8 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	/* ILIT2911 or GTCH1563 */
-	touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-0 = <&ts0_default>;
-		pinctrl-names = "default";
-	};
-
-	/* TODO: second-sourced touchscreen @ 0x41 */
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
-	/delete-property/ #sound-dai-cells;
-
-	status = "okay";
-
-	aux-bus {
-		panel {
-			compatible = "edp-panel";
-			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
-			power-supply = <&vreg_edp_3p3>;
-
-			pinctrl-0 = <&edp_bl_en>;
-			pinctrl-names = "default";
-
-			port {
-				edp_panel_in: endpoint {
-					remote-endpoint = <&mdss_dp3_out>;
-				};
-			};
-		};
-	};
-
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
-};
-
-&mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
-&pcie4 {
-	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
-
-	pinctrl-0 = <&pcie4_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie4_phy {
-	vdda-phy-supply = <&vreg_l3i_0p8>;
-	vdda-pll-supply = <&vreg_l3e_1p2>;
-
-	status = "okay";
-};
-
-&pcie6a {
-	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
-
-	vddpe-3v3-supply = <&vreg_nvme>;
-
-	pinctrl-0 = <&pcie6a_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie6a_phy {
-	vdda-phy-supply = <&vreg_l1d_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
+&panel {
+	backlight = <&backlight>;
 };
 
 &pmc8380_3_gpios {
-	edp_bl_en: edp-bl-en-state {
-		pins = "gpio4";
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
 		function = "normal";
-		power-source = <1>;
-		input-disable;
-		output-enable;
 	};
 };
 
-&qupv3_0 {
-	status = "okay";
-};
-
-&qupv3_1 {
-	status = "okay";
-};
-
-&qupv3_2 {
-	status = "okay";
-};
-
-&remoteproc_adsp {
-	firmware-name = "qcom/x1e80100/LENOVO/21N1/qcadsp8380.mbn",
-			"qcom/x1e80100/LENOVO/21N1/adsp_dtbs.elf";
-
-	status = "okay";
-};
-
-&remoteproc_cdsp {
-	firmware-name = "qcom/x1e80100/LENOVO/21N1/qccdsp8380.mbn",
-			"qcom/x1e80100/LENOVO/21N1/cdsp_dtbs.elf";
-
-	status = "okay";
-};
-
-&smb2360_0_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l2b_3p0>;
-};
-
-&smb2360_1_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l14b_3p0>;
-};
-
-&tlmm {
-	gpio-reserved-ranges = <34 2>, /* Unused */
-			       <44 4>, /* SPI (TPM) */
-			       <72 2>, /* Secure EC I2C connection (?) */
-			       <238 1>; /* UFS Reset */
-
-	tpad_default: tpad-default-state {
-		pins = "gpio3";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	nvme_reg_en: nvme-reg-en-state {
-		pins = "gpio18";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	ts0_default: ts0-default-state {
-		reset-n-pins {
-			pins = "gpio48";
-			function = "gpio";
-			output-high;
-			drive-strength = <16>;
-		};
-
-		int-n-pins {
-			pins = "gpio51";
-			function = "gpio";
-			bias-disable;
-		};
-	};
-
-	kybd_default: kybd-default-state {
-		pins = "gpio67";
-		function = "gpio";
-		bias-disable;
-	};
-
-	edp_reg_en: edp-reg-en-state {
-		pins = "gpio70";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-	};
-
-	hall_int_n_default: hall-int-n-state {
-		pins = "gpio92";
-		function = "gpio";
-		bias-disable;
-	};
-
-	pcie4_default: pcie4-default-state {
-		clkreq-n-pins {
-			pins = "gpio147";
-			function = "pcie4_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio146";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio148";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie6a_default: pcie6a-default-state {
-		clkreq-n-pins {
-			pins = "gpio153";
-			function = "pcie6a_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio152";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio154";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	wcd_default: wcd-reset-n-active-state {
-		pins = "gpio191";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
+&pmk8550_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio5";
+		function = "func3";
 	};
 };
 
-&usb_1_ss0_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_0_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l1j_0p8>;
-
-	status = "okay";
-};
-
-&usb_1_ss0 {
-	status = "okay";
-};
-
-&usb_1_ss0_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss0_hs_in>;
-};
-
-&usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
-};
-
-&usb_1_ss1_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_1_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l2d_0p9>;
-
+&pmk8550_pwm {
 	status = "okay";
 };
-
-&usb_1_ss1 {
-	status = "okay";
-};
-
-&usb_1_ss1_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss1_hs_in>;
-};
-
-&usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
-};
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
new file mode 100644
index 000000000000..80ece9db875a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -0,0 +1,1602 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "hamoa.dtsi"
+#include "hamoa-pmics.dtsi"
+
+/ {
+	model = "Lenovo ThinkPad T14s Gen 6";
+	compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100";
+	chassis-type = "laptop";
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+		mux-controls = <&us_euro_mux_ctrl>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Display-adjacent port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* User-adjacent port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	/* two muxes together support CTIA and OMTP switching */
+	us_euro_mux_ctrl: mux-controller {
+		compatible = "gpio-mux";
+		pinctrl-0 = <&us_euro_hs_sel>;
+		pinctrl-names = "default";
+		mux-supply = <&vreg_l16b_2p5>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN_RCM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-LENOVO-Thinkpad-T14s";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS1",
+				"VA DMIC1", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p5: ldo16 {
+			regulator-name = "vreg_l16b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&qup_i2c0_data_clk>, <&tpad_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* ELAN06E2 or ELAN06E3 */
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* SYNA8022 or SYNA8024 */
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* ELAN06F1 or SYNA06F2 */
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	embedded-controller@28 {
+		compatible = "lenovo,thinkpad-t14s-ec";
+		reg = <0x28>;
+
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ec_int_n_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ILIT2911 or GTCH1563 */
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+
+	/* TODO: second-sourced touchscreen @ 0x41 */
+};
+
+&iris {
+	firmware-name = "qcom/x1e80100/LENOVO/21N1/qcvss8380.mbn";
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel: panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		drive-push-pull;
+		input-disable;
+		output-enable;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/LENOVO/21N1/qcadsp8380.mbn",
+			"qcom/x1e80100/LENOVO/21N1/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/LENOVO/21N1/qccdsp8380.mbn",
+			"qcom/x1e80100/LENOVO/21N1/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <72 2>, /* Secure EC I2C connection (?) */
+			       <238 1>; /* UFS Reset */
+
+	ec_int_n_default: ec-int-n-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	us_euro_hs_sel: us-euro-hs-sel-state {
+		pins = "gpio68";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb5_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index 8515c254e158..d4df21de0d95 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -7,16 +7,36 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
+#include "hamoa.dtsi"
+#include "hamoa-pmics.dtsi"
 
 / {
 	model = "ASUS Vivobook S 15";
 	compatible = "asus,vivobook-s15", "qcom,x1e80100";
 	chassis-type = "laptop";
 
+	aliases {
+		serial1 = &uart14;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
 	pmic-glink {
 		compatible = "qcom,x1e80100-pmic-glink",
 			     "qcom,sm8550-pmic-glink",
@@ -137,6 +157,107 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the CRD mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_en>, <&wcn_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -176,12 +297,33 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l14b_3p0: ldo14 {
 			regulator-name = "vreg_l14b_3p0";
 			regulator-min-microvolt = <3072000>;
 			regulator-max-microvolt = <3072000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
 	};
 
 	regulators-1 {
@@ -193,6 +335,13 @@
 		vdd-l3-supply = <&vreg_s1f_0p7>;
 		vdd-s4-supply = <&vph_pwr>;
 
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_s4c_1p8: smps4 {
 			regulator-name = "vreg_s4c_1p8";
 			regulator-min-microvolt = <1856000>;
@@ -314,8 +463,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -328,6 +477,14 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -377,7 +534,49 @@
 		wakeup-source;
 	};
 
-	/* EC? @ 0x5b, 0x76 */
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	/* EC @ 0x76 */
 };
 
 &i2c7 {
@@ -392,16 +591,22 @@
 };
 
 &mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
 		panel {
-			compatible = "edp-panel";
+			compatible = "samsung,atna56ac03", "samsung,atna33xc20";
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
 			power-supply = <&vreg_edp_3p3>;
 
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
 			port {
 				edp_panel_in: endpoint {
 					remote-endpoint = <&mdss_dp3_out>;
@@ -409,19 +614,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -448,6 +647,23 @@
 	status = "okay";
 };
 
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -467,6 +683,18 @@
 	status = "okay";
 };
 
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
+		bias-pull-down;
+		input-disable;
+		output-enable;
+	};
+};
+
 &qupv3_0 {
 	status = "okay";
 };
@@ -493,11 +721,19 @@
 	status = "okay";
 };
 
+&smb2360_0 {
+	status = "okay";
+};
+
 &smb2360_0_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l2b_3p0>;
 };
 
+&smb2360_1 {
+	status = "okay";
+};
+
 &smb2360_1_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l14b_3p0>;
@@ -515,6 +751,36 @@
 		bias-disable;
 	};
 
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
 	kybd_default: kybd-default-state {
 		pins = "gpio67";
 		function = "gpio";
@@ -579,6 +845,44 @@
 		function = "gpio";
 		bias-disable;
 	};
+
+	wcn_bt_en: wcn-bt-en-state {
+		pins = "gpio116";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-down;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	wcn_wlan_en: wcn-wlan-en-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
 };
 
 &usb_1_ss0_hsphy {
@@ -591,7 +895,7 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l1j_0p8>;
 
 	status = "okay";
@@ -623,7 +927,7 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
@@ -644,3 +948,56 @@
 &usb_1_ss1_qmpphy_out {
 	remote-endpoint = <&pmic_glink_ss1_ss_in>;
 };
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb5_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts
new file mode 100644
index 000000000000..0408ade7150f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "hamoa.dtsi"
+#include "x1-asus-zenbook-a14.dtsi"
+
+/ {
+	model = "ASUS Zenbook A14 (UX3407RA)";
+	compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100";
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+	};
+};
+
+&panel {
+	compatible = "samsung,atna40cu11", "samsung,atna33xc20";
+	enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&edp_bl_en>;
+	pinctrl-names = "default";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qccdsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+
+		max-speed = <3000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 39f9d9cdc10d..429deffcf3e9 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -5,1258 +5,18 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
+#include "hamoa.dtsi"
+#include "x1-crd.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
 	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
-
-	aliases {
-		serial0 = &uart21;
-	};
-
-	wcd938x: audio-codec {
-		compatible = "qcom,wcd9385-codec";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wcd_default>;
-
-		qcom,micbias1-microvolt = <1800000>;
-		qcom,micbias2-microvolt = <1800000>;
-		qcom,micbias3-microvolt = <1800000>;
-		qcom,micbias4-microvolt = <1800000>;
-		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
-		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
-		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
-		qcom,rx-device = <&wcd_rx>;
-		qcom,tx-device = <&wcd_tx>;
-
-		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
-
-		vdd-buck-supply = <&vreg_l15b_1p8>;
-		vdd-rxtx-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l15b_1p8>;
-		vdd-mic-bias-supply = <&vreg_bob1>;
-
-		#sound-dai-cells = <1>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&hall_int_n_default>;
-		pinctrl-names = "default";
-
-		switch-lid {
-			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			wakeup-source;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-		};
-	};
-
-	pmic-glink {
-		compatible = "qcom,x1e80100-pmic-glink",
-			     "qcom,sm8550-pmic-glink",
-			     "qcom,pmic-glink";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
-				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
-				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
-
-		/* Left-side rear port */
-		connector@0 {
-			compatible = "usb-c-connector";
-			reg = <0>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss0_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
-					};
-				};
-			};
-		};
-
-		/* Left-side front port */
-		connector@1 {
-			compatible = "usb-c-connector";
-			reg = <1>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss1_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
-					};
-				};
-			};
-		};
-
-		/* Right-side port */
-		connector@2 {
-			compatible = "usb-c-connector";
-			reg = <2>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss2_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss2_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
-					};
-				};
-			};
-		};
-	};
-
-	reserved-memory {
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x0 0x8000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-	sound {
-		compatible = "qcom,x1e80100-sndcard";
-		model = "X1E80100-CRD";
-		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
-				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
-				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
-				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
-				"IN1_HPHL", "HPHL_OUT",
-				"IN2_HPHR", "HPHR_OUT",
-				"AMIC2", "MIC BIAS2",
-				"VA DMIC0", "MIC BIAS3",
-				"VA DMIC1", "MIC BIAS3",
-				"VA DMIC2", "MIC BIAS1",
-				"VA DMIC3", "MIC BIAS1",
-				"VA DMIC0", "VA MIC BIAS3",
-				"VA DMIC1", "VA MIC BIAS3",
-				"VA DMIC2", "VA MIC BIAS1",
-				"VA DMIC3", "VA MIC BIAS1",
-				"TX SWR_INPUT1", "ADC2_OUTPUT";
-
-		wcd-playback-dai-link {
-			link-name = "WCD Playback";
-
-			cpu {
-				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
-			};
-
-			codec {
-				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		wcd-capture-dai-link {
-			link-name = "WCD Capture";
-
-			cpu {
-				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
-			};
-
-			codec {
-				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		wsa-dai-link {
-			link-name = "WSA Playback";
-
-			cpu {
-				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
-			};
-
-			codec {
-				sound-dai = <&left_woofer>, <&left_tweeter>,
-					    <&swr0 0>, <&lpass_wsamacro 0>,
-					    <&right_woofer>, <&right_tweeter>,
-					    <&swr3 0>, <&lpass_wsa2macro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		va-dai-link {
-			link-name = "VA Capture";
-
-			cpu {
-				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
-			};
-
-			codec {
-				sound-dai = <&lpass_vamacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-	};
-
-	vreg_edp_3p3: regulator-edp-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_EDP_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&edp_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_misc_3p3: regulator-misc-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_MISC_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&misc_3p3_reg_en>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vreg_nvme: regulator-nvme {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_NVME_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&nvme_reg_en>;
-
-		regulator-boot-on;
-	};
-
-	vph_pwr: regulator-vph-pwr {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vreg_wwan: regulator-wwan {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDX_VPH_PWR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&wwan_sw_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm8550-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-bob1-supply = <&vph_pwr>;
-		vdd-bob2-supply = <&vph_pwr>;
-		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
-		vdd-l2-l13-l14-supply = <&vreg_bob1>;
-		vdd-l5-l16-supply = <&vreg_bob1>;
-		vdd-l6-l7-supply = <&vreg_bob2>;
-		vdd-l8-l9-supply = <&vreg_bob1>;
-		vdd-l12-supply = <&vreg_s5j_1p2>;
-		vdd-l15-supply = <&vreg_s4c_1p8>;
-		vdd-l17-supply = <&vreg_bob2>;
-
-		vreg_bob1: bob1 {
-			regulator-name = "vreg_bob1";
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_bob2: bob2 {
-			regulator-name = "vreg_bob2";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1b_1p8: ldo1 {
-			regulator-name = "vreg_l1b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2b_3p0: ldo2 {
-			regulator-name = "vreg_l2b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4b_1p8: ldo4 {
-			regulator-name = "vreg_l4b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l5b_3p0: ldo5 {
-			regulator-name = "vreg_l5b_3p0";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6b_1p8: ldo6 {
-			regulator-name = "vreg_l6b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7b_2p8: ldo7 {
-			regulator-name = "vreg_l7b_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b_3p0: ldo8 {
-			regulator-name = "vreg_l8b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9b_2p9: ldo9 {
-			regulator-name = "vreg_l9b_2p9";
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b_1p8: ldo10 {
-			regulator-name = "vreg_l10b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12b_1p2: ldo12 {
-			regulator-name = "vreg_l12b_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l13b_3p0: ldo13 {
-			regulator-name = "vreg_l13b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l14b_3p0: ldo14 {
-			regulator-name = "vreg_l14b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b_1p8: ldo15 {
-			regulator-name = "vreg_l15b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l16b_2p9: ldo16 {
-			regulator-name = "vreg_l16b_2p9";
-			regulator-min-microvolt = <2912000>;
-			regulator-max-microvolt = <2912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17b_2p5: ldo17 {
-			regulator-name = "vreg_l17b_2p5";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s4-supply = <&vph_pwr>;
-
-		vreg_s4c_1p8: smps4 {
-			regulator-name = "vreg_s4c_1p8";
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1c_1p2: ldo1 {
-			regulator-name = "vreg_l1c_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c_0p8: ldo2 {
-			regulator-name = "vreg_l2c_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c_0p8: ldo3 {
-			regulator-name = "vreg_l3c_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "d";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s4c_1p8>;
-		vdd-s1-supply = <&vph_pwr>;
-
-		vreg_l1d_0p8: ldo1 {
-			regulator-name = "vreg_l1d_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2d_0p9: ldo2 {
-			regulator-name = "vreg_l2d_0p9";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3d_1p8: ldo3 {
-			regulator-name = "vreg_l3d_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-3 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-
-		vreg_l2e_0p8: ldo2 {
-			regulator-name = "vreg_l2e_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3e_1p2: ldo3 {
-			regulator-name = "vreg_l3e_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-4 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "f";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-		vdd-s1-supply = <&vph_pwr>;
-
-		vreg_s1f_0p7: smps1 {
-			regulator-name = "vreg_s1f_0p7";
-			regulator-min-microvolt = <700000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1f_1p0: ldo1 {
-			regulator-name = "vreg_l1f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f_1p0: ldo2 {
-			regulator-name = "vreg_l2f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3f_1p0: ldo3 {
-			regulator-name = "vreg_l3f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-6 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "i";
-
-		vdd-l1-supply = <&vreg_s4c_1p8>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-
-		vreg_s1i_0p9: smps1 {
-			regulator-name = "vreg_s1i_0p9";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s2i_1p0: smps2 {
-			regulator-name = "vreg_s2i_1p0";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1i_1p8: ldo1 {
-			regulator-name = "vreg_l1i_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2i_1p2: ldo2 {
-			regulator-name = "vreg_l2i_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3i_0p8: ldo3 {
-			regulator-name = "vreg_l3i_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-7 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "j";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s5-supply = <&vph_pwr>;
-
-		vreg_s5j_1p2: smps5 {
-			regulator-name = "vreg_s5j_1p2";
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1j_0p8: ldo1 {
-			regulator-name = "vreg_l1j_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2j_1p2: ldo2 {
-			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3j_0p8: ldo3 {
-			regulator-name = "vreg_l3j_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-};
-
-&gpu {
-	status = "okay";
-
-	zap-shader {
-		firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
-	};
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	touchpad@15 {
-		compatible = "hid-over-i2c";
-		reg = <0x15>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l12b_1p2>;
-
-		pinctrl-0 = <&tpad_default>;
-		pinctrl-names = "default";
-
-		wakeup-source;
-	};
-
-	keyboard@3a {
-		compatible = "hid-over-i2c";
-		reg = <0x3a>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l12b_1p2>;
-
-		pinctrl-0 = <&kybd_default>;
-		pinctrl-names = "default";
-
-		wakeup-source;
-	};
-};
-
-&i2c8 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_1p8>;
-
-		pinctrl-0 = <&ts0_default>;
-		pinctrl-names = "default";
-	};
-};
-
-&lpass_tlmm {
-	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
-		pins = "gpio12";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-
-	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
-		pins = "gpio13";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
 };
 
-&lpass_vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
-	pinctrl-names = "default";
-
-	vdd-micb-supply = <&vreg_l1b_1p8>;
-	qcom,dmic-sample-rate = <4800000>;
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
 };
 
-&mdss {
-	status = "okay";
-};
-
-&mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
-	/delete-property/ #sound-dai-cells;
-
+&iris {
 	status = "okay";
-
-	aux-bus {
-		panel {
-			compatible = "samsung,atna45af01", "samsung,atna33xc20";
-			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
-			power-supply = <&vreg_edp_3p3>;
-
-			pinctrl-0 = <&edp_bl_en>;
-			pinctrl-names = "default";
-
-			port {
-				edp_panel_in: endpoint {
-					remote-endpoint = <&mdss_dp3_out>;
-				};
-			};
-		};
-	};
-
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
-};
-
-&mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
-&pcie4 {
-	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
-
-	pinctrl-0 = <&pcie4_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie4_phy {
-	vdda-phy-supply = <&vreg_l3i_0p8>;
-	vdda-pll-supply = <&vreg_l3e_1p2>;
-
-	status = "okay";
-};
-
-&pcie5 {
-	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
-
-	vddpe-3v3-supply = <&vreg_wwan>;
-
-	pinctrl-0 = <&pcie5_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie5_phy {
-	vdda-phy-supply = <&vreg_l3i_0p8>;
-	vdda-pll-supply = <&vreg_l3e_1p2>;
-
-	status = "okay";
-};
-
-&pcie6a {
-	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
-
-	vddpe-3v3-supply = <&vreg_nvme>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie6a_default>;
-
-	status = "okay";
-};
-
-&pcie6a_phy {
-	vdda-phy-supply = <&vreg_l1d_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
-&pm8550ve_8_gpios {
-	misc_3p3_reg_en: misc-3p3-reg-en-state {
-		pins = "gpio6";
-		function = "normal";
-		bias-disable;
-		input-disable;
-		output-enable;
-		drive-push-pull;
-		power-source = <1>; /* 1.8 V */
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-};
-
-&pmc8380_3_gpios {
-	edp_bl_en: edp-bl-en-state {
-		pins = "gpio4";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		input-disable;
-		output-enable;
-	};
-};
-
-&qupv3_0 {
-	status = "okay";
-};
-
-&qupv3_1 {
-	status = "okay";
-};
-
-&qupv3_2 {
-	status = "okay";
-};
-
-&remoteproc_adsp {
-	firmware-name = "qcom/x1e80100/adsp.mbn",
-			"qcom/x1e80100/adsp_dtb.mbn";
-
-	status = "okay";
-};
-
-&remoteproc_cdsp {
-	firmware-name = "qcom/x1e80100/cdsp.mbn",
-			"qcom/x1e80100/cdsp_dtb.mbn";
-
-	status = "okay";
-};
-
-&smb2360_0_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l2b_3p0>;
-};
-
-&smb2360_1_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l14b_3p0>;
-};
-
-&smb2360_2 {
-	status = "okay";
-};
-
-&smb2360_2_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l8b_3p0>;
-};
-
-&swr0 {
-	status = "okay";
-
-	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
-	pinctrl-names = "default";
-
-	/* WSA8845, Left Woofer */
-	left_woofer: speaker@0,0 {
-		compatible = "sdw20217020400";
-		reg = <0 0>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "WooferLeft";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <1 2 3 7 10 13>;
-	};
-
-	/* WSA8845, Left Tweeter */
-	left_tweeter: speaker@0,1 {
-		compatible = "sdw20217020400";
-		reg = <0 1>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "TweeterLeft";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <4 5 6 7 11 13>;
-	};
-};
-
-&swr1 {
-	status = "okay";
-
-	/* WCD9385 RX */
-	wcd_rx: codec@0,4 {
-		compatible = "sdw20217010d00";
-		reg = <0 4>;
-		qcom,rx-port-mapping = <1 2 3 4 5>;
-	};
-};
-
-&swr2 {
-	status = "okay";
-
-	/* WCD9385 TX */
-	wcd_tx: codec@0,3 {
-		compatible = "sdw20217010d00";
-		reg = <0 3>;
-		qcom,tx-port-mapping = <2 2 3 4>;
-	};
-};
-
-&swr3 {
-	status = "okay";
-
-	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
-	pinctrl-names = "default";
-
-	/* WSA8845, Right Woofer */
-	right_woofer: speaker@0,0 {
-		compatible = "sdw20217020400";
-		reg = <0 0>;
-		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "WooferRight";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <1 2 3 7 10 13>;
-	};
-
-	/* WSA8845, Right Tweeter */
-	right_tweeter: speaker@0,1 {
-		compatible = "sdw20217020400";
-		reg = <0 1>;
-		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "TweeterRight";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <4 5 6 7 11 13>;
-	};
-};
-
-&tlmm {
-	gpio-reserved-ranges = <34 2>, /* Unused */
-			       <44 4>, /* SPI (TPM) */
-			       <238 1>; /* UFS Reset */
-
-	edp_reg_en: edp-reg-en-state {
-		pins = "gpio70";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-	};
-
-	hall_int_n_default: hall-int-n-state {
-		pins = "gpio92";
-		function = "gpio";
-		bias-disable;
-	};
-
-	kybd_default: kybd-default-state {
-		pins = "gpio67";
-		function = "gpio";
-		bias-disable;
-	};
-
-	nvme_reg_en: nvme-reg-en-state {
-		pins = "gpio18";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	pcie4_default: pcie4-default-state {
-		clkreq-n-pins {
-			pins = "gpio147";
-			function = "pcie4_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio146";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio148";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie5_default: pcie5-default-state {
-		clkreq-n-pins {
-			pins = "gpio150";
-			function = "pcie5_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio149";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio151";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie6a_default: pcie6a-default-state {
-		clkreq-n-pins {
-			pins = "gpio153";
-			function = "pcie6a_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio152";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio154";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	tpad_default: tpad-default-state {
-		pins = "gpio3";
-		function = "gpio";
-		bias-disable;
-	};
-
-	ts0_default: ts0-default-state {
-		int-n-pins {
-			pins = "gpio51";
-			function = "gpio";
-			bias-disable;
-		};
-
-		reset-n-pins {
-			pins = "gpio48";
-			function = "gpio";
-			output-high;
-			drive-strength = <16>;
-		};
-	};
-
-	wcd_default: wcd-reset-n-active-state {
-		pins = "gpio191";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-
-	wwan_sw_en: wwan-sw-en-state {
-		pins = "gpio221";
-		function = "gpio";
-		drive-strength = <4>;
-		bias-disable;
-	};
-};
-
-&uart21 {
-	compatible = "qcom,geni-debug-uart";
-	status = "okay";
-};
-
-&usb_1_ss0_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_0_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l1j_0p8>;
-
-	status = "okay";
-};
-
-&usb_1_ss0 {
-	status = "okay";
-};
-
-&usb_1_ss0_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss0_hs_in>;
-};
-
-&usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
-};
-
-&usb_1_ss1_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_1_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l2d_0p9>;
-
-	status = "okay";
-};
-
-&usb_1_ss1 {
-	status = "okay";
-};
-
-&usb_1_ss1_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss1_hs_in>;
-};
-
-&usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
-};
-
-&usb_1_ss2_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_2_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss2_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l2d_0p9>;
-
-	status = "okay";
-};
-
-&usb_1_ss2 {
-	status = "okay";
-};
-
-&usb_1_ss2_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss2_hs_in>;
-};
-
-&usb_1_ss2_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss2_ss_in>;
 };
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts
new file mode 100644
index 000000000000..75e10d97c386
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+/dts-v1/;
+
+#include "hamoa.dtsi"
+#include "x1-dell-thena.dtsi"
+
+/ {
+	model = "Dell Inspiron 14 Plus 7441";
+	compatible = "dell,inspiron-14-plus-7441", "qcom,x1e80100";
+};
+
+&sound {
+	model = "X1E80100-Dell-Inspiron-14p-7441";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcdxkmsuc8380.mbn";
+};
+
+&i2c8 {
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&iris {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcvss8380.mbn";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcadsp8380.mbn",
+			"qcom/x1e80100/dell/inspiron-14-plus-7441/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qccdsp8380.mbn",
+			"qcom/x1e80100/dell/inspiron-14-plus-7441/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts
new file mode 100644
index 000000000000..a8ff7ef258a1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+/dts-v1/;
+
+#include "hamoa.dtsi"
+#include "x1-dell-thena.dtsi"
+
+/ {
+	model = "Dell Latitude 7455";
+	compatible = "dell,latitude-7455", "qcom,x1e80100";
+};
+
+&sound {
+	model = "X1E80100-Dell-Latitude-7455";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qcdxkmsuc8380.mbn";
+};
+
+&i2c8 {
+	/* LXST2021 */
+	touchscreen@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x09>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&iris {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qcvss8380.mbn";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qcadsp8380.mbn",
+			"qcom/x1e80100/dell/latitude-7455/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qccdsp8380.mbn",
+			"qcom/x1e80100/dell/latitude-7455/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
index 05624226faf9..2f533e56c8c8 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
@@ -12,8 +12,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
+#include "hamoa.dtsi"
+#include "hamoa-pmics.dtsi"
 
 / {
 	model = "Dell XPS 13 9345";
@@ -22,6 +22,7 @@
 
 	aliases {
 		serial0 = &uart21;
+		serial1 = &uart14;
 	};
 
 	gpio-keys {
@@ -89,7 +90,15 @@
 					reg = <1>;
 
 					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
 					};
 				};
 			};
@@ -118,7 +127,15 @@
 					reg = <1>;
 
 					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
 					};
 				};
 			};
@@ -166,6 +183,102 @@
 		regulator-boot-on;
 	};
 
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
 	vreg_vph_pwr: regulator-vph-pwr {
 		compatible = "regulator-fixed";
 
@@ -176,6 +289,101 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -247,6 +455,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -268,6 +477,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l17b_2p5: ldo17 {
@@ -466,10 +676,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn";
 };
 
 &i2c0 {
@@ -492,9 +702,59 @@
 
 &i2c3 {
 	clock-frequency = <400000>;
-	status = "disabled";
-	/* PS8830 Retimer @0x8 */
-	/* Unknown device @0x9 */
+	status = "okay";
+
+	/* Right-side USB Type-C port */
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
 };
 
 &i2c5 {
@@ -505,9 +765,60 @@
 
 &i2c7 {
 	clock-frequency = <400000>;
-	status = "disabled";
-	/* PS8830 Retimer @0x8 */
-	/* Unknown device @0x9 */
+	status = "okay";
+
+	/* Left-side USB Type-C port */
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+
+		};
+	};
 };
 
 &i2c8 {
@@ -529,8 +840,21 @@
 
 &i2c9 {
 	clock-frequency = <400000>;
-	status = "disabled";
-	/* USB3 retimer device @0x4f */
+	status = "okay";
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
 };
 
 &i2c17 {
@@ -551,13 +875,37 @@
 	};
 };
 
+&iris {
+	firmware-name = "qcom/x1e80100/dell/xps13-9345/qcvss8380.mbn";
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -576,19 +924,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -615,6 +957,23 @@
 	status = "okay";
 };
 
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -634,6 +993,36 @@
 	status = "okay";
 };
 
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+
+	rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
+&pmc8380_5_gpios {
+	rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
+&pm8550ve_9_gpios {
+	rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
 &qupv3_0 {
 	status = "okay";
 };
@@ -660,11 +1049,19 @@
 	status = "okay";
 };
 
+&smb2360_0 {
+	status = "okay";
+};
+
 &smb2360_0_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l2b_3p0>;
 };
 
+&smb2360_1 {
+	status = "okay";
+};
+
 &smb2360_1_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l14b_3p0>;
@@ -696,6 +1093,14 @@
 		bias-disable;
 	};
 
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	hall_int_n_default: hall-int-n-state {
 		pins = "gpio92";
 		function = "gpio";
@@ -762,6 +1167,34 @@
 		};
 	};
 
+	rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	tpad_default: tpad-default-state {
 		disable-pins {
 			pins = "gpio38";
@@ -803,6 +1236,37 @@
 			drive-strength = <2>;
 		};
 	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
 };
 
 &uart21 {
@@ -820,7 +1284,7 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l1j_0p9>;
 
 	status = "okay";
@@ -839,7 +1303,7 @@
 };
 
 &usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+	remote-endpoint = <&retimer_ss0_ss_in>;
 };
 
 &usb_1_ss1_hsphy {
@@ -852,7 +1316,7 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
@@ -871,5 +1335,39 @@
 };
 
 &usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p9>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p9>;
+
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts
new file mode 100644
index 000000000000..0b3b6cb23e1a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "x1e80100-hp-omnibook-x14.dts"
+
+/ {
+	model = "HP EliteBook Ultra G1q";
+	compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcadsp8380.mbn",
+			"qcom/x1e80100/hp/elitebook-ultra-g1q/adsp_dtbs.elf";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qccdsp8380.mbn",
+			"qcom/x1e80100/hp/elitebook-ultra-g1q/cdsp_dtbs.elf";
+};
+
+&sound {
+	model = "X1E80100-HP-ELITEBOOK-ULTRA-G1Q";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
new file mode 100644
index 000000000000..b79e59e1c413
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "hamoa.dtsi"
+#include "hamoa-pmics.dtsi"
+#include "x1-hp-omnibook-x14.dtsi"
+
+/ {
+	model = "HP Omnibook X 14-fe0";
+	compatible = "hp,omnibook-x14", "qcom,x1e80100";
+	chassis-type = "laptop";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcadsp8380.mbn",
+			"qcom/x1e80100/hp/omnibook-x14/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qccdsp8380.mbn",
+			"qcom/x1e80100/hp/omnibook-x14/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index ca5a808f2c7d..4c31d14a07bc 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -6,10 +6,11 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
+#include "hamoa.dtsi"
+#include "hamoa-pmics.dtsi"
 
 / {
 	model = "Lenovo Yoga Slim 7x";
@@ -17,12 +18,28 @@
 
 	aliases {
 		serial0 = &uart21;
+		serial1 = &uart14;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
 	pmic-glink {
 		compatible = "qcom,x1e80100-pmic-glink",
 			     "qcom,sm8550-pmic-glink",
@@ -56,7 +73,15 @@
 					reg = <1>;
 
 					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
 					};
 				};
 			};
@@ -85,7 +110,15 @@
 					reg = <1>;
 
 					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
 					};
 				};
 			};
@@ -114,7 +147,15 @@
 					reg = <1>;
 
 					pmic_glink_ss2_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
 					};
 				};
 			};
@@ -136,7 +177,11 @@
 		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
 				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
 				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
-				"TweeterRight IN", "WSA2 WSA_SPK2 OUT";
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb",
+				"VA DMIC2", "vdd-micb",
+				"VA DMIC3", "vdd-micb";
 
 		wsa-dai-link {
 			link-name = "WSA Playback";
@@ -206,6 +251,150 @@
 		regulator-boot-on;
 	};
 
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
 	vph_pwr: regulator-vph-pwr {
 		compatible = "regulator-fixed";
 
@@ -216,6 +405,107 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the CRD mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -274,6 +564,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l14b_3p0: ldo14 {
@@ -288,8 +579,8 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
-
 	};
 
 	regulators-1 {
@@ -492,8 +783,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -508,10 +799,10 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn";
-	};
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn";
 };
 
 &i2c0 {
@@ -546,6 +837,178 @@
 	};
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+
+		};
+	};
+};
+
 &i2c8 {
 	clock-frequency = <400000>;
 
@@ -563,6 +1026,11 @@
 	};
 };
 
+&iris {
+	firmware-name = "qcom/x1e80100/LENOVO/83ED/qcvss8380.mbn";
+	status = "okay";
+};
+
 &lpass_tlmm {
 	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
 		pins = "gpio12";
@@ -593,10 +1061,36 @@
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
 &mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -615,19 +1109,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -659,7 +1147,15 @@
 		compatible = "pci17cb,1107";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 
-		qcom,ath12k-calibration-variant = "LES790";
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
 	};
 };
 
@@ -682,6 +1178,37 @@
 	status = "okay";
 };
 
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
 &pmc8380_3_gpios {
 	edp_bl_en: edp-bl-en-state {
 		pins = "gpio4";
@@ -692,6 +1219,17 @@
 	};
 };
 
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
 &qupv3_0 {
 	status = "okay";
 };
@@ -717,11 +1255,19 @@
 	status = "okay";
 };
 
+&smb2360_0 {
+	status = "okay";
+};
+
 &smb2360_0_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l2b_3p0>;
 };
 
+&smb2360_1 {
+	status = "okay";
+};
+
 &smb2360_1_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l14b_3p0>;
@@ -811,6 +1357,28 @@
 		bias-disable;
 	};
 
+	hall_int_n_default: hall-int-n-state {
+		lid-n-pins {
+			pins = "gpio92";
+			function = "gpio";
+			bias-disable;
+		};
+
+		/*
+		 * Pins 71 and 92 seem to be bridged together (pin 71 and 92 show the same
+		 * events). By default, pin 71 is set as output-high, which blocks any
+		 * event on pin 92. Output-disable on pin 71 is necessary to get events on
+		 * pin 92.
+		 * The purpose of pin 71 is not yet known; lid-pull is a supposition.
+		 */
+		lid-pull-n-pins {
+			pins = "gpio71";
+			function = "gpio";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+
 	kybd_default: kybd-default-state {
 		pins = "gpio67";
 		function = "gpio";
@@ -870,6 +1438,20 @@
 		};
 	};
 
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	tpad_default: tpad-default-state {
 		pins = "gpio3";
 		function = "gpio";
@@ -891,6 +1473,78 @@
 		};
 	};
 
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
 };
 
 &uart21 {
@@ -908,7 +1562,7 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l1j_0p8>;
 
 	status = "okay";
@@ -927,7 +1581,7 @@
 };
 
 &usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+	remote-endpoint = <&retimer_ss0_ss_in>;
 };
 
 &usb_1_ss1_hsphy {
@@ -940,7 +1594,7 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
@@ -959,7 +1613,7 @@
 };
 
 &usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+	remote-endpoint = <&retimer_ss1_ss_in>;
 };
 
 &usb_1_ss2_hsphy {
@@ -972,7 +1626,7 @@
 };
 
 &usb_1_ss2_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
@@ -991,5 +1645,5 @@
 };
 
 &usb_1_ss2_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss2_ss_in>;
+	remote-endpoint = <&retimer_ss2_ss_in>;
 };
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
index 6835fdeef3ae..7e1e808ea983 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
@@ -9,8 +9,8 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
+#include "hamoa.dtsi"
+#include "hamoa-pmics.dtsi"
 
 / {
 	aliases {
@@ -22,6 +22,33 @@
 		i2c7 = &i2c7;
 	};
 
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+
+		vdd-buck-supply = <&vreg_l15b>;
+		vdd-rxtx-supply = <&vreg_l15b>;
+		vdd-io-supply = <&vreg_l15b>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		#sound-dai-cells = <1>;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pmk8550_pwm 0 5000000>;
@@ -97,7 +124,15 @@
 					reg = <1>;
 
 					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
 					};
 				};
 			};
@@ -126,7 +161,15 @@
 					reg = <1>;
 
 					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
 					};
 				};
 			};
@@ -158,6 +201,109 @@
 		regulator-boot-on;
 	};
 
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr1_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+
 	vreg_nvme: regulator-nvme {
 		compatible = "regulator-fixed";
 
@@ -184,6 +330,181 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-Romulus";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC0", "VA MIC BIAS3",
+				"VA DMIC1", "VA MIC BIAS3",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>,
+					    <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -284,6 +605,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b: ldo13 {
@@ -305,6 +627,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b: ldo16 {
@@ -538,11 +861,11 @@
 
 &gpu {
 	status = "okay";
+};
 
-	zap-shader {
-		memory-region = <&gpu_microcode_mem>;
-		firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn";
-	};
+&gpu_zap_shader {
+	memory-region = <&gpu_microcode_mem>;
+	firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn";
 };
 
 &i2c0 {
@@ -558,7 +881,58 @@
 
 	status = "okay";
 
-	/* PS8830 USB retimer @8 */
+	/* Left-side rear port */
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+
 };
 
 &i2c4 {
@@ -592,17 +966,101 @@
 
 	status = "okay";
 
-	/* PS8830 USB retimer @8 */
+	/* Left-side front port */
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	qcom,dmic-sample-rate = <4800000>;
+
+	vdd-micb-supply = <&vreg_l1b>;
+
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
 };
 
 &mdss {
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
 &mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -619,19 +1077,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -641,6 +1093,25 @@
 	status = "okay";
 };
 
+&pcie3 {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie3_default>;
+	pinctrl-names = "default";
+
+	/* The RTS5261 chip on the other side only does Gen1x1 anyway */
+	max-link-speed = <1>;
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l3c>;
+	vdda-pll-supply = <&vreg_l3e>;
+
+	status = "okay";
+};
+
 &pcie4 {
 	status = "okay";
 };
@@ -652,6 +1123,23 @@
 	status = "okay";
 };
 
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -671,6 +1159,28 @@
 	status = "okay";
 };
 
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+
+	rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
+&pm8550ve_9_gpios {
+	rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
 &pmc8380_3_gpios {
 	edp_bl_en: edp-bl-en-state {
 		pins = "gpio4";
@@ -681,6 +1191,14 @@
 	};
 };
 
+&pmc8380_5_gpios {
+	rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+	};
+};
+
 &pmk8550_pwm {
 	status = "okay";
 };
@@ -706,15 +1224,19 @@
 
 &remoteproc_adsp {
 	firmware-name = "qcom/x1e80100/microsoft/Romulus/qcadsp8380.mbn",
-			"qcom/x1e80100/microsoft/Romulus/adsp_dtb.mbn";
+			"qcom/x1e80100/microsoft/Romulus/adsp_dtbs.elf";
 
 	status = "okay";
 };
 
 &remoteproc_cdsp {
 	firmware-name = "qcom/x1e80100/microsoft/Romulus/qccdsp8380.mbn",
-			"qcom/x1e80100/microsoft/Romulus/cdsp_dtb.mbn";
+			"qcom/x1e80100/microsoft/Romulus/cdsp_dtbs.elf";
+
+	status = "okay";
+};
 
+&smb2360_0 {
 	status = "okay";
 };
 
@@ -723,6 +1245,10 @@
 	vdd3-supply = <&vreg_l2b>;
 };
 
+&smb2360_1 {
+	status = "okay";
+};
+
 &smb2360_1_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d>;
 	vdd3-supply = <&vreg_l14b>;
@@ -737,6 +1263,59 @@
 	vdd3-supply = <&vreg_l8b>;
 };
 
+&swr0 {
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WSA8845, Left speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b>;
+		vdd-io-supply = <&vreg_l12b>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b>;
+		vdd-io-supply = <&vreg_l12b>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <44 4>, /* SPI (TPM) */
 			       <238 1>; /* UFS Reset */
@@ -767,6 +1346,36 @@
 		bias-disable;
 	};
 
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie3_default: pcie3-default-state {
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		clkreq-n-pins {
+			pins = "gpio144";
+			function = "pcie3_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie6a_default: pcie6a-default-state {
 		perst-n-pins {
 			pins = "gpio152";
@@ -790,6 +1399,42 @@
 		};
 	};
 
+	rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	cam_indicator_en: cam-indicator-en-state {
 		pins = "gpio225";
 		function = "gpio";
@@ -813,6 +1458,23 @@
 	};
 };
 
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
 &usb_1_ss0_hsphy {
 	vdd-supply = <&vreg_l3j>;
 	vdda12-supply = <&vreg_l2j>;
@@ -823,7 +1485,7 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e>;
+	vdda-phy-supply = <&vreg_l2j>;
 	vdda-pll-supply = <&vreg_l1j>;
 
 	status = "okay";
@@ -842,7 +1504,7 @@
 };
 
 &usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+	remote-endpoint = <&retimer_ss0_ss_in>;
 };
 
 &usb_1_ss1_hsphy {
@@ -855,7 +1517,7 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e>;
+	vdda-phy-supply = <&vreg_l2j>;
 	vdda-pll-supply = <&vreg_l2d>;
 
 	status = "okay";
@@ -874,7 +1536,7 @@
 };
 
 &usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+	remote-endpoint = <&retimer_ss1_ss_in>;
 };
 
 /* MP0 goes to the Surface Connector, MP1 goes to the USB-A port */
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 5ef030c60abe..b742aabd9c04 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -8,8 +8,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
+#include "hamoa.dtsi"
+#include "hamoa-pmics.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. X1E80100 QCP";
@@ -17,6 +17,7 @@
 
 	aliases {
 		serial0 = &uart21;
+		serial1 = &uart14;
 	};
 
 	wcd938x: audio-codec {
@@ -84,6 +85,14 @@
 						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
 					};
 				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss0_sbu_mux>;
+					};
+				};
 			};
 		};
 
@@ -112,6 +121,14 @@
 						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
 					};
 				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss1_sbu_mux>;
+					};
+				};
 			};
 		};
 
@@ -140,6 +157,14 @@
 						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
 					};
 				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss2_sbu_mux>;
+					};
+				};
 			};
 		};
 	};
@@ -256,6 +281,200 @@
 
 		regulator-boot-on;
 	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_pcie_12v: regulator-pcie-12v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+
+		gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pcie_x8_12v>;
+		pinctrl-names = "default";
+	};
+
+	vreg_pcie_3v3_aux: regulator-pcie-3v3-aux {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_3P3_AUX";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8380_3_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pm_sde7_aux_3p3_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_pcie_3v3: regulator-pcie-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8380_3_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pm_sde7_main_3p3_en>;
+		pinctrl-names = "default";
+};
+
+	usb-1-ss0-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss0_sbu>;
+			};
+		};
+	};
+
+	usb-1-ss1-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss1_sbu>;
+			};
+		};
+	};
+
+	usb-1-ss2-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 171 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 170 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss2_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss2_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss2_sbu>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -356,6 +575,7 @@
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l13b_3p0: ldo13 {
@@ -377,6 +597,7 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l16b_2p9: ldo16 {
@@ -594,8 +815,8 @@
 
 		vreg_l2j_1p2: ldo2 {
 			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -610,9 +831,43 @@
 
 &gpu {
 	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
 
-	zap-shader {
-		firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
 	};
 };
 
@@ -630,10 +885,36 @@
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
 &mdss_dp3 {
-	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -648,18 +929,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -669,6 +945,59 @@
 	status = "okay";
 };
 
+&pm8550ve_8_gpios {
+	pcie_x8_12v: pcie-12v-default-state {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
+&pmc8380_3_gpios {
+	pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+
+	pm_sde7_main_3p3_en: pcie-main-3p3-default-state {
+		pins = "gpio6";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
+&pcie3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_default>;
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l3c_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie3_port {
+	vpcie12v-supply = <&vreg_pcie_12v>;
+	vpcie3v3-supply = <&vreg_pcie_3v3>;
+	vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>;
+};
+
 &pcie4 {
 	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
@@ -686,6 +1015,23 @@
 	status = "okay";
 };
 
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -731,11 +1077,32 @@
 	status = "okay";
 };
 
+&smb2360_0 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l6b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
 &smb2360_0_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l2b_3p0>;
 };
 
+&smb2360_1 {
+	status = "okay";
+};
+
 &smb2360_1_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l14b_3p0>;
@@ -819,6 +1186,22 @@
 		bias-disable;
 	};
 
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	nvme_reg_en: nvme-reg-en-state {
 		pins = "gpio18";
 		function = "gpio";
@@ -826,6 +1209,29 @@
 		bias-disable;
 	};
 
+	pcie3_default: pcie3-default-state {
+		clkreq-n-pins {
+			pins = "gpio144";
+			function = "pcie3_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie4_default: pcie4-default-state {
 		clkreq-n-pins {
 			pins = "gpio147";
@@ -872,6 +1278,86 @@
 		};
 	};
 
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+		mode-pins {
+			pins = "gpio166";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio168";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+	};
+
+	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+		mode-pins {
+			pins = "gpio177";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio178";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	usb_1_ss2_sbu_default: usb-1-ss2-sbu-state {
+		mode-pins {
+			pins = "gpio169";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio171";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio170";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
 	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio191";
 		function = "gpio";
@@ -879,6 +1365,37 @@
 		bias-disable;
 		output-low;
 	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
 };
 
 &uart21 {
@@ -896,7 +1413,7 @@
 };
 
 &usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l1j_0p8>;
 
 	status = "okay";
@@ -928,7 +1445,7 @@
 };
 
 &usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
@@ -960,7 +1477,7 @@
 };
 
 &usb_1_ss2_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-phy-supply = <&vreg_l2j_1p2>;
 	vdda-pll-supply = <&vreg_l2d_0p9>;
 
 	status = "okay";
@@ -981,3 +1498,39 @@
 &usb_1_ss2_qmpphy_out {
 	remote-endpoint = <&pmic_glink_ss2_ss_in>;
 };
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts
new file mode 100644
index 000000000000..be756069131d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex@vinarskis.com>
+ */
+
+/dts-v1/;
+
+#include "x1p42100-asus-zenbook-a14.dtsi"
+
+/ {
+	model = "ASUS Zenbook A14 (UX3407QA, LCD)";
+	compatible = "asus,zenbook-a14-ux3407qa-lcd", "asus,zenbook-a14-ux3407qa", "qcom,x1p42100";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 416667>;
+		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+		pinctrl-names = "default";
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_bl_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+};
+
+&panel {
+	backlight = <&backlight>;
+};
+
+&pmc8380_3_gpios {
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
+		function = "normal";
+	};
+};
+
+&pmk8550_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio5";
+		function = "func3";
+	};
+};
+
+&pmk8550_pwm {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts
new file mode 100644
index 000000000000..68cd318d6907
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "x1p42100-asus-zenbook-a14.dtsi"
+
+/ {
+	model = "ASUS Zenbook A14 (UX3407QA)";
+	compatible = "asus,zenbook-a14-ux3407qa-oled", "asus,zenbook-a14-ux3407qa", "qcom,x1p42100";
+};
+
+&panel {
+	compatible = "samsung,atna40ct06", "samsung,atna33xc20";
+	enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&edp_bl_en>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi
new file mode 100644
index 000000000000..22470a97e1e3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex@vinarskis.com>
+ */
+
+/dts-v1/;
+
+#include "purwa.dtsi"
+#include "x1-asus-zenbook-a14.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_wcn_1p9>;
+		vddpcie1p3-supply = <&vreg_wcn_1p9>;
+		vddpcie1p9-supply = <&vreg_wcn_1p9>;
+		vddpmu-supply = <&vreg_wcn_0p95>;
+		vddpmucx-supply = <&vreg_wcn_0p95>;
+		vddpmumx-supply = <&vreg_wcn_0p95>;
+		vddrfa0p95-supply = <&vreg_wcn_0p95>;
+		vddrfa1p3-supply = <&vreg_wcn_1p9>;
+		vddrfa1p9-supply = <&vreg_wcn_1p9>;
+
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+
+		qcom,calibration-variant = "UX3407Q";
+	};
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn",
+			"qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn",
+			"qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+
+		max-speed = <3000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-crd.dts b/arch/arm64/boot/dts/qcom/x1p42100-crd.dts
new file mode 100644
index 000000000000..7ed4116b9590
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-crd.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "purwa.dtsi"
+#include "x1-crd.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1P42100 CRD";
+	compatible = "qcom,x1p42100-crd", "qcom,x1p42100";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1p42100/gen71500_zap.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts
new file mode 100644
index 000000000000..0f338e457abd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "purwa.dtsi"
+#include "hamoa-pmics.dtsi"
+#include "x1-hp-omnibook-x14.dtsi"
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+	model = "HP Omnibook X 14-fe1";
+	compatible = "hp,omnibook-x14-fe1", "qcom,x1p42100";
+	chassis-type = "laptop";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1p42100/hp/omnibook-x14/qcdxkmsucpurwa.mbn";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1p42100/hp/omnibook-x14/qcadsp8380.mbn",
+			"qcom/x1p42100/hp/omnibook-x14/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1p42100/hp/omnibook-x14/qccdsp8380.mbn",
+			"qcom/x1p42100/hp/omnibook-x14/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts
new file mode 100644
index 000000000000..3186e79e862d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts
@@ -0,0 +1,1625 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ * Copyright (c) 2025, Jens Glathe
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "purwa.dtsi"
+#include "hamoa-pmics.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+	model = "Lenovo ThinkBook 16 Gen 7 QOY";
+	compatible = "lenovo,thinkbook-16", "qcom,x1p42100";
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8550_pwm 3 500000>;
+
+		power-supply = <&vreg_edp_bl>;
+	};
+
+	/*
+	 * This is an odd one. The camera is physically behind the eusb9 repeater (confirmed) but
+	 * if it is placed below the usb_2_dwc3 node, it will be switched off after ~30 seconds.
+	 * The reason seems to be that the dwc3 driver does not probe for child nodes when in
+	 * host-only mode. But that's the default setting for the xhci controllers due to issues
+	 * when in OTG mode. https://lore.kernel.org/all/20241210111444.26240-1-johan+linaro@kernel.org/
+	 * The whole reason it is described in the dt (as an USB device) is its requirement for
+	 * that additional regulator, and to get power management to switch it off when suspended.
+	 * Defining it stand-alone does work.
+	 */
+	camera {
+		compatible = "usb5986,1198";
+
+		vdd-supply = <&vreg_cam_5p0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+
+		/* Display-adjacent port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "host";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		/* User-adjacent port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "host";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-LENOVO-ThinkBook-16";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	usb-1-ss0-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 167 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 168 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss0_sbu>;
+			};
+		};
+	};
+
+	usb-1-ss1-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 179 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss1_sbu>;
+			};
+		};
+	};
+
+	vreg_cam_5p0: regulator-cam-5p0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_CAM_5P0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&cam_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_bl_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1p42100/LENOVO/21NH/qcdxkmsucpurwa.mbn";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&qup_i2c2_data_clk>, <&tpad_default>, <&kybd_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* ELAN06FA */
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* CIRQ1080 or SYNA2BA6 */
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* FTCS0038 */
+	touchpad@38 {
+		compatible = "hid-over-i2c";
+		reg = <0x38>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* GXTP5100 */
+	touchpad@5d {
+		compatible = "hid-over-i2c";
+		reg = <0x5d>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+	};
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb9_repeater: redriver@4b {
+		compatible = "nxp,ptn3222";
+		reg = <0x4b>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb9_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ILIT2911 or GTCH1563 */
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_pwm {
+	status = "okay";
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-disable;
+		output-enable;
+		drive-push-pull;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		input-disable;
+		output-enable;
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
+		function = "normal";
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1p42100/LENOVO/21NH/qcadsp8380.mbn",
+			"qcom/x1p42100/LENOVO/21NH/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1p42100/LENOVO/21NH/qccdsp8380.mbn",
+			"qcom/x1p42100/LENOVO/21NH/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l6b_1p8>;
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <72 2>; /* Secure EC I2C connection (?) */
+
+	edp_hpd_default: edp-hpd-default-state {
+		pins = "gpio119";
+		function = "edp0_hot";
+		bias-disable;
+	};
+
+	cam_reg_en: cam-reg-en-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb9_reset_n: eusb9-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+		oe-n-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio168";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+	};
+
+	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+		oe-n-pins {
+			pins = "gpio178";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio179";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+	phys = <&usb_1_ss2_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&eusb5_repeater>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb9_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 97228a3cb99c..1fab1b50f20e 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -86,14 +86,49 @@ dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f4-s4sk.dtb
 
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-cpu.dtb
-dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtbo
-r8a779g0-white-hawk-ard-audio-da7212-dtbs := r8a779g0-white-hawk.dtb r8a779g0-white-hawk-ard-audio-da7212.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += white-hawk-ard-audio-da7212.dtbo
+r8a779g0-white-hawk-ard-audio-da7212-dtbs := r8a779g0-white-hawk.dtb white-hawk-ard-audio-da7212.dtbo
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtb
 
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g2-white-hawk-single.dtb
+r8a779g2-white-hawk-single-ard-audio-da7212-dtbs := r8a779g2-white-hawk-single.dtb white-hawk-ard-audio-da7212.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g2-white-hawk-single-ard-audio-da7212.dtb
+
+DTC_FLAGS_r8a779g3-sparrow-hawk += -Wno-spi_bus_bridge
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx219.dtbo
+r8a779g3-sparrow-hawk-camera-j1-imx219-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j1-imx219.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx219.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx462.dtbo
+r8a779g3-sparrow-hawk-camera-j1-imx462-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j1-imx462.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx462.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx219.dtbo
+r8a779g3-sparrow-hawk-camera-j2-imx219-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j2-imx219.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx219.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx462.dtbo
+r8a779g3-sparrow-hawk-camera-j2-imx462-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j2-imx462.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx462.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-argon40.dtbo
+r8a779g3-sparrow-hawk-fan-argon40-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-fan-argon40.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-argon40.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtbo
+r8a779g3-sparrow-hawk-fan-pwm-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-fan-pwm.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-5in.dtbo
+r8a779g3-sparrow-hawk-rpi-display-2-5in-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-rpi-display-2-5in.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-5in.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-7in.dtbo
+r8a779g3-sparrow-hawk-rpi-display-2-7in-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-rpi-display-2-7in.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-7in.dtb
+
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-white-hawk-single.dtb
+r8a779g3-white-hawk-single-ard-audio-da7212-dtbs := r8a779g3-white-hawk-single.dtb white-hawk-ard-audio-da7212.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-white-hawk-single-ard-audio-da7212.dtb
 
 dtb-$(CONFIG_ARCH_R8A779H0) += r8a779h0-gray-hawk-single.dtb
 
+dtb-$(CONFIG_ARCH_R8A779H0) += r8a779h2-gray-hawk-single.dtb
+
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
 r8a779m1-salvator-xs-panel-aa104xd12-dtbs := r8a779m1-salvator-xs.dtb salvator-panel-aa104xd12.dtbo
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs-panel-aa104xd12.dtb
@@ -110,6 +145,8 @@ dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
 r8a779m5-salvator-xs-panel-aa104xd12-dtbs := r8a779m5-salvator-xs.dtb salvator-panel-aa104xd12.dtbo
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs-panel-aa104xd12.dtb
 
+dtb-$(CONFIG_ARCH_R8A78000) += r8a78000-ironhide.dtb
+
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-cru-csi-ov5645.dtbo
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-du-adv7513.dtbo
@@ -126,6 +163,7 @@ dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtbo
 r9a07g044c2-smarc-cru-csi-ov5645-dtbs := r9a07g044c2-smarc.dtb r9a07g044c2-smarc-cru-csi-ov5645.dtbo
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtb
 
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-remi-pi.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo
 r9a07g044l2-smarc-cru-csi-ov5645-dtbs := r9a07g044l2-smarc.dtb r9a07g044l2-smarc-cru-csi-ov5645.dtbo
@@ -137,10 +175,37 @@ r9a07g054l2-smarc-cru-csi-ov5645-dtbs := r9a07g054l2-smarc.dtb r9a07g054l2-smarc
 dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc-cru-csi-ov5645.dtb
 
 dtb-$(CONFIG_ARCH_R9A08G045) += r9a08g045s33-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A08G045) += r9a08g045s33-smarc-pmod1-type-3a.dtbo
+r9a08g045s33-smarc-pmod1-type-3a-dtbs := r9a08g045s33-smarc.dtb r9a08g045s33-smarc-pmod1-type-3a.dtbo
+dtb-$(CONFIG_ARCH_R9A08G045) += r9a08g045s33-smarc-pmod1-type-3a.dtb
 
 dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
 
+dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc-cru-csi-ov5645.dtbo
+r9a09g047e57-smarc-cru-csi-ov5645-dtbs := r9a09g047e57-smarc.dtb r9a09g047e57-smarc-cru-csi-ov5645.dtbo
+dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc-cru-csi-ov5645.dtb
+
+dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk.dtb
+dtb-$(CONFIG_ARCH_R9A09G056) += rzv2-evk-cn15-emmc.dtbo
+r9a09g056n48-rzv2n-evk-cn15-emmc-dtbs := r9a09g056n48-rzv2n-evk.dtb rzv2-evk-cn15-emmc.dtbo
+dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk-cn15-emmc.dtb
+dtb-$(CONFIG_ARCH_R9A09G056) += rzv2-evk-cn15-sd.dtbo
+r9a09g056n48-rzv2n-evk-cn15-sd-dtbs := r9a09g056n48-rzv2n-evk.dtb rzv2-evk-cn15-sd.dtbo
+dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk-cn15-sd.dtb
+
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk.dtb
+dtb-$(CONFIG_ARCH_R9A09G057) += rzv2-evk-cn15-emmc.dtbo
+r9a09g057h44-rzv2h-evk-cn15-emmc-dtbs := r9a09g057h44-rzv2h-evk.dtb rzv2-evk-cn15-emmc.dtbo
+dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk-cn15-emmc.dtb
+dtb-$(CONFIG_ARCH_R9A09G057) += rzv2-evk-cn15-sd.dtbo
+r9a09g057h44-rzv2h-evk-cn15-sd-dtbs := r9a09g057h44-rzv2h-evk.dtb rzv2-evk-cn15-sd.dtbo
+dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk-cn15-sd.dtb
+dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h48-kakip.dtb
+
+dtb-$(CONFIG_ARCH_R9A09G077) += r9a09g077m44-rzt2h-evk.dtb
+
+dtb-$(CONFIG_ARCH_R9A09G087) += r9a09g087m44-rzn2h-evk.dtb
 
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
diff --git a/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
index 7cb5c958aece..529388f6bf2b 100644
--- a/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
+++ b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
@@ -66,7 +66,6 @@
 		compatible = "ovti,ov5645";
 		reg = <0x3c>;
 		clocks = <&osc25250_clk>;
-		clock-frequency = <24000000>;
 		vdddo-supply = <&ov5645_vdddo_1v8>;
 		vdda-supply = <&ov5645_vdda_2v8>;
 		vddd-supply = <&ov5645_vddd_1v5>;
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 43f88c199b78..d40a7224f9c3 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -282,6 +282,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 	status = "okay";
 };
 
@@ -299,7 +300,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupts-extended = <&gpio1 27 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi
index 375a56b20f26..9fe9c722187d 100644
--- a/arch/arm64/boot/dts/renesas/condor-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi
@@ -174,6 +174,7 @@
 &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 	clock-frequency = <400000>;
@@ -230,6 +231,7 @@
 		compatible = "rohm,br24t01", "atmel,24c01";
 		reg = <0x50>;
 		pagesize = <8>;
+		bootph-all;
 	};
 };
 
@@ -544,6 +546,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
index 05712cd96d28..733a55f77cfb 100644
--- a/arch/arm64/boot/dts/renesas/draak.dtsi
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -308,6 +308,7 @@
 &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 	status = "okay";
 
 	ak4613: codec@10 {
@@ -449,6 +450,7 @@
 		compatible = "rohm,br24t01", "atmel,24c01";
 		reg = <0x50>;
 		pagesize = <8>;
+		bootph-all;
 	};
 };
 
@@ -695,6 +697,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -719,6 +722,11 @@
 	shared-pin;
 };
 
+/* Firmware should reserve it but sadly doesn't */
+&swdt {
+	status = "reserved";
+};
+
 &usb2_phy0 {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi
index ab8283656660..adc4449b809a 100644
--- a/arch/arm64/boot/dts/renesas/ebisu.dtsi
+++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi
@@ -327,9 +327,18 @@
 	};
 };
 
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	/* Please only enable canfd or can0 */
+	/* status = "okay"; */
+};
+
 &canfd {
 	pinctrl-0 = <&canfd0_pins>;
 	pinctrl-names = "default";
+	/* Please only enable canfd or can0 */
 	status = "okay";
 
 	channel0 {
@@ -503,6 +512,7 @@
 };
 
 &i2c_dvfs {
+	bootph-all;
 	status = "okay";
 
 	clock-frequency = <400000>;
@@ -526,6 +536,7 @@
 		compatible = "rohm,br24t01", "atmel,24c01";
 		reg = <0x50>;
 		pagesize = <8>;
+		bootph-all;
 	};
 };
 
@@ -579,6 +590,11 @@
 		function = "avb";
 	};
 
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
 	canfd0_pins: canfd0 {
 		groups = "canfd0_data";
 		function = "canfd0";
@@ -786,6 +802,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -841,6 +858,11 @@
 	shared-pin;
 };
 
+/* Firmware should reserve it but sadly doesn't */
+&swdt {
+	status = "reserved";
+};
+
 &usb2_phy0 {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi b/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi
new file mode 100644
index 000000000000..2edb5cb3407b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi
@@ -0,0 +1,866 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the Gray Hawk Single board
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ * Copyright (C) 2024-2025 Glider bv
+ */
+/*
+ * [How to use Sound]
+ *
+ * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture
+ * at the same time. You need to switch the direction which is controlled
+ * by the GP0_01 pin via amixer.
+ *
+ * Playback (CN9500)
+ *	> amixer set "MUX" "Playback"	// for GP0_01
+ *	> amixer set "DAC 1" 85%
+ *	> aplay xxx.wav
+ *
+ * Capture (CN9501)
+ *	> amixer set "MUX" "Capture"	// for GP0_01
+ *	> amixer set "Mic 1" 80%
+ *	> amixer set "ADC 1" on
+ *	> amixer set 'ADC 1' 80%
+ *	> arecord xxx hoge.wav
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+/ {
+	model = "Renesas Gray Hawk Single board";
+	compatible = "renesas,gray-hawk-single";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &hscif0;
+		serial1 = &hscif2;
+		ethernet0 = &avb0;
+		ethernet1 = &avb1;
+		ethernet2 = &avb2;
+	};
+
+	can_transceiver0: can-phy0 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		max-bitrate = <5000000>;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:921600n8";
+	};
+
+	sn65dsi86_refclk: clk-x6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW47";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW48";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW49";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+		};
+
+		led-2 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+		};
+
+		led-3 {
+			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x1 0x80000000>;
+	};
+
+	pcie_clk: clk-9fgv0841-pci {
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+		#clock-cells = <0>;
+	};
+
+	mini-dp-con {
+		compatible = "dp-connector";
+		label = "CN5";
+		type = "mini";
+
+		port {
+			mini_dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out0>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_mux: sound-mux {
+		compatible = "simple-audio-mux";
+		mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		state-labels = "Playback", "Capture";
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card2";
+		label = "rcar-sound";
+		aux-devs = <&sound_mux>; // for GP0_01
+
+		links = <&rsnd_port>; // AK4619 Audio Codec
+	};
+};
+
+&audio_clkin {
+	clock-frequency = <24576000>;
+};
+
+&avb0 {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb0_phy>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		avb0_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0022.1622",
+				"ethernet-phy-ieee802.3-c22";
+				rxc-skew-ps = <1500>;
+				reg = <0>;
+				interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
+				reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&avb1 {
+	pinctrl-0 = <&avb1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb1_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		avb1_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <0>;
+			interrupts-extended = <&gpio6 3 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&avb2 {
+	pinctrl-0 = <&avb2_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb2_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		avb2_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <0>;
+			interrupts-extended = <&gpio5 4 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&can_clk {
+	clock-frequency = <40000000>;
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+		phys = <&can_transceiver0>;
+	};
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96724_out0>;
+			};
+		};
+	};
+};
+
+&csi41 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi41_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96724_out1>;
+			};
+		};
+	};
+};
+
+&dsi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi0_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in0>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio1 {
+	audio-power-hog {
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "Audio-Power";
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	bootph-all;
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hscif2 {
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander_a: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		interrupts-extended = <&gpio0 0 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	io_expander_b: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander_c: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "cpu-board";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+
+	eeprom@51 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "breakout-board";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+
+	eeprom@52 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "csi-dsi-sub-board-id";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+
+	eeprom@53 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "ethernet-sub-board-id";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bridge@2c {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+
+		vccio-supply = <&reg_1p8v>;
+		vpll-supply = <&reg_1p8v>;
+		vcca-supply = <&reg_1p2v>;
+		vcc-supply = <&reg_1p2v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sn65dsi86_in0: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sn65dsi86_out0: endpoint {
+					remote-endpoint = <&mini_dp_con_in>;
+				};
+			};
+		};
+	};
+
+	gmsl0: gmsl-deserializer@4e {
+		compatible = "maxim,max96724";
+		reg = <0x4e>;
+		enable-gpios = <&io_expander_b 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96724_out0: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4f {
+		compatible = "maxim,max96724";
+		reg = <0x4f>;
+		enable-gpios = <&io_expander_c 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96724_out1: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi41_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	codec@10 {
+		compatible = "asahi-kasei,ak4619";
+		reg = <0x10>;
+
+		clocks = <&rcar_sound>;
+		clock-names = "mclk";
+
+		#sound-dai-cells = <0>;
+		port {
+			ak4619_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint>;
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&isp1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&pcie0_clkref {
+	compatible = "gpio-gate-clock";
+	clocks = <&pcie_clk>;
+	enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	/delete-property/ clock-frequency;
+};
+
+&pciec0 {
+	reset-gpios = <&io_expander_a 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>;
+	pinctrl-names = "default";
+
+	avb0_pins: avb0 {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+				 "avb0_txcrefclk";
+			function = "avb0";
+		};
+
+		pins_mdio {
+			groups = "avb0_mdio";
+			drive-strength = <21>;
+		};
+
+		pins_mii {
+			groups = "avb0_rgmii";
+			drive-strength = <21>;
+		};
+	};
+
+	avb1_pins: avb1 {
+		mux {
+			groups = "avb1_link", "avb1_mdio", "avb1_rgmii",
+				 "avb1_txcrefclk";
+			function = "avb1";
+		};
+
+		link {
+			groups = "avb1_link";
+			bias-disable;
+		};
+
+		mdio {
+			groups = "avb1_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "avb1_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+	};
+
+	avb2_pins: avb2 {
+		mux {
+			groups = "avb2_link", "avb2_mdio", "avb2_rgmii",
+				 "avb2_txcrefclk";
+			function = "avb2";
+		};
+
+		link {
+			groups = "avb2_link";
+			bias-disable;
+		};
+
+		mdio {
+			groups = "avb2_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "avb2_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+	};
+
+	can_clk_pins: can-clk {
+		groups = "can_clk";
+		function = "can_clk";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data";
+		function = "canfd0";
+	};
+
+	canfd1_pins: canfd1 {
+		groups = "canfd1_data";
+		function = "canfd1";
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data", "hscif2_ctrl";
+		function = "hscif2";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	i2c3_pins: i2c3 {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+
+	irq0_pins: irq0_pins {
+		groups = "intc_ex_irq0_a";
+		function = "intc_ex";
+	};
+
+	keys_pins: keys {
+		pins = "GP_5_0", "GP_5_1", "GP_5_2";
+		bias-pull-up;
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif_clk_pins: scif-clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	scif_clk2_pins: scif-clk2 {
+		groups = "scif_clk2";
+		function = "scif_clk2";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clkin", "audio_clkout";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi_ctrl", "ssi_data";
+		function = "ssi";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_clk_pins>, <&sound_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* audio_clkout */
+	clock-frequency = <12288000>;
+
+	ports {
+		rsnd_port: port {
+			rsnd_endpoint: endpoint {
+				remote-endpoint = <&ak4619_endpoint>;
+				bitclock-master;
+				frame-master;
+
+				/* see above [How to use Sound] */
+				playback = <&ssi0>;
+				capture  = <&ssi0>;
+			};
+		};
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0x1200000>;
+				read-only;
+			};
+			user@1200000 {
+				reg = <0x1200000 0x2e00000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
+
+&scif_clk2 {
+	clock-frequency = <24000000>;
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
+
+&vin08 {
+	status = "okay";
+};
+
+&vin09 {
+	status = "okay";
+};
+
+&vin10 {
+	status = "okay";
+};
+
+&vin11 {
+	status = "okay";
+};
+
+&vin12 {
+	status = "okay";
+};
+
+&vin13 {
+	status = "okay";
+};
+
+&vin14 {
+	status = "okay";
+};
+
+&vin15 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 659ae1fed2fa..4e78139d52f6 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -289,6 +289,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index f065ee90649a..f0729a482cef 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r8a774a1";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -215,6 +216,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -222,6 +224,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -233,17 +236,17 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
 	};
 
 	pmu_a57 {
 		compatible = "arm,cortex-a57-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts= <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a57_0>, <&a57_1>;
 	};
 
@@ -261,7 +264,8 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -400,6 +404,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a774a1";
 			reg = <0 0xe6060000 0 0x50c>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -480,11 +485,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a774a1-rst";
 			reg = <0 0xe6160000 0 0x018c>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1179,7 +1186,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -2785,6 +2792,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -2855,10 +2863,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 117cb6950f91..c9857ea944ed 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r8a774b1";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -108,6 +109,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -115,6 +117,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -126,8 +129,8 @@
 
 	pmu_a57 {
 		compatible = "arm,cortex-a57-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a57_0>, <&a57_1>;
 	};
 
@@ -145,7 +148,8 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -284,6 +288,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a774b1";
 			reg = <0 0xe6060000 0 0x50c>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -364,11 +369,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a774b1-rst";
 			reg = <0 0xe6160000 0 0x0200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1063,7 +1070,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -2661,6 +2668,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -2726,10 +2734,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index b78dbd807d15..57a281fc4977 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -378,6 +378,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 7655d5e3a034..3858f4328e96 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -13,6 +13,7 @@
 	compatible = "renesas,r8a774c0";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -47,16 +48,20 @@
 	cluster1_opp: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
+
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1030000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1030000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1030000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
@@ -103,6 +108,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -114,8 +120,8 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts= <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a53_0>, <&a53_1>;
 	};
 
@@ -133,7 +139,8 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -257,6 +264,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a774c0";
 			reg = <0 0xe6060000 0 0x508>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -337,11 +345,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a774c0-rst";
 			reg = <0 0xe6160000 0 0x0200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1019,7 +1029,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -1953,6 +1963,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -1989,10 +2000,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index f845ca604de0..52920a6bf592 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r8a774e1";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -277,6 +278,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -284,6 +286,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -295,19 +298,19 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
 	};
 
 	pmu_a57 {
 		compatible = "arm,cortex-a57-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, <&a57_3>;
 	};
 
@@ -325,7 +328,8 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -464,6 +468,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a774e1";
 			reg = <0 0xe6060000 0 0x50c>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -544,11 +549,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a774e1-rst";
 			reg = <0 0xe6160000 0 0x0200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1291,7 +1298,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -2917,6 +2924,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -2989,10 +2997,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 96f3b5fe7e92..9ad700bde4ba 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -18,6 +18,7 @@
 	compatible = "renesas,r8a7795";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -292,6 +293,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -299,6 +301,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -310,10 +313,10 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a53_0>,
 				     <&a53_1>,
 				     <&a53_2>,
@@ -322,10 +325,10 @@
 
 	pmu_a57 {
 		compatible = "arm,cortex-a57-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a57_0>,
 				     <&a57_1>,
 				     <&a57_2>,
@@ -346,7 +349,7 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -362,6 +365,16 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_OSC>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 401>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a7795",
 				     "renesas,rcar-gen3-gpio";
@@ -485,6 +498,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7795";
 			reg = <0 0xe6060000 0 0x50c>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -565,11 +579,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7795-rst";
 			reg = <0 0xe6160000 0 0x0200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1367,7 +1383,7 @@
 			       <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -3398,6 +3414,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -3469,10 +3486,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index ee80f52dc7cf..e03b1f7cbfd6 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -13,6 +13,7 @@
 	compatible = "renesas,r8a7796";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -264,6 +265,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -271,6 +273,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -282,17 +285,17 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
 	};
 
 	pmu_a57 {
 		compatible = "arm,cortex-a57-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a57_0>, <&a57_1>;
 	};
 
@@ -310,7 +313,8 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -326,6 +330,16 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a7796-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_OSC>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 401>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a7796",
 				     "renesas,rcar-gen3-gpio";
@@ -449,6 +463,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a7796";
 			reg = <0 0xe6060000 0 0x50c>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -529,11 +544,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7796-rst";
 			reg = <0 0xe6160000 0 0x0200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1238,7 +1255,7 @@
 			       <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -2558,6 +2575,23 @@
 			resets = <&cpg 408>;
 		};
 
+		gpu: gpu@fd000000 {
+			compatible = "renesas,r8a7796-gpu",
+				     "img,img-gx6250",
+				     "img,img-rogue";
+			reg = <0 0xfd000000 0 0x40000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_ZG>,
+				 <&cpg CPG_CORE R8A7796_CLK_S2D1>,
+				 <&cpg CPG_MOD 112>;
+			clock-names = "core", "mem", "sys";
+			power-domains = <&sysc R8A7796_PD_3DG_A>,
+					<&sysc R8A7796_PD_3DG_B>;
+			power-domain-names = "a", "b";
+			resets = <&cpg 112>;
+			status = "disabled";
+		};
+
 		pciec0: pcie@fe000000 {
 			compatible = "renesas,pcie-r8a7796",
 				     "renesas,pcie-rcar-gen3";
@@ -2996,6 +3030,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -3066,10 +3101,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 3b9066043a71..31b11bdab69b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -13,6 +13,7 @@
 	compatible = "renesas,r8a77961";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -264,6 +265,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -271,6 +273,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -282,17 +285,17 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
 	};
 
 	pmu_a57 {
 		compatible = "arm,cortex-a57-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a57_0>, <&a57_1>;
 	};
 
@@ -310,7 +313,8 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -326,6 +330,16 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a77961-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_OSC>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 401>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77961",
 				     "renesas,rcar-gen3-gpio";
@@ -449,6 +463,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a77961";
 			reg = <0 0xe6060000 0 0x50c>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -529,11 +544,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a77961-rst";
 			reg = <0 0xe6160000 0 0x0200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1238,7 +1255,7 @@
 			       <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -2438,6 +2455,23 @@
 			resets = <&cpg 408>;
 		};
 
+		gpu: gpu@fd000000 {
+			compatible = "renesas,r8a77961-gpu",
+				     "img,img-gx6250",
+				     "img,img-rogue";
+			reg = <0 0xfd000000 0 0x40000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_ZG>,
+				 <&cpg CPG_CORE R8A77961_CLK_S2D1>,
+				 <&cpg CPG_MOD 112>;
+			clock-names = "core", "mem", "sys";
+			power-domains = <&sysc R8A77961_PD_3DG_A>,
+					<&sysc R8A77961_PD_3DG_B>;
+			power-domain-names = "a", "b";
+			resets = <&cpg 112>;
+			status = "disabled";
+		};
+
 		pciec0: pcie@fe000000 {
 			compatible = "renesas,pcie-r8a77961",
 				     "renesas,pcie-rcar-gen3";
@@ -2817,6 +2851,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -2887,10 +2922,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 557bdf8fab17..4e730144e5fd 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -18,6 +18,7 @@
 	compatible = "renesas,r8a77965";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -143,6 +144,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -150,6 +152,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -161,8 +164,8 @@
 
 	pmu_a57 {
 		compatible = "arm,cortex-a57-pmu";
-		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a57_0>,
 				     <&a57_1>;
 	};
@@ -181,7 +184,8 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -197,6 +201,16 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a77965-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A77965_CLK_OSC>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 401>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77965",
 				     "renesas,rcar-gen3-gpio";
@@ -320,6 +334,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a77965";
 			reg = <0 0xe6060000 0 0x50c>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -400,11 +415,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a77965-rst";
 			reg = <0 0xe6160000 0 0x0200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1101,7 +1118,7 @@
 			       <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -2433,6 +2450,23 @@
 			resets = <&cpg 408>;
 		};
 
+		gpu: gpu@fd000000 {
+			compatible = "renesas,r8a77965-gpu",
+				     "img,img-ge7800",
+				     "img,img-rogue";
+			reg = <0 0xfd000000 0 0x40000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A77965_CLK_ZG>,
+				 <&cpg CPG_CORE R8A77965_CLK_S2D1>,
+				 <&cpg CPG_MOD 112>;
+			clock-names = "core", "mem", "sys";
+			power-domains = <&sysc R8A77965_PD_3DG_A>,
+					<&sysc R8A77965_PD_3DG_B>;
+			power-domain-names = "a", "b";
+			resets = <&cpg 112>;
+			status = "disabled";
+		};
+
 		pciec0: pcie@fe000000 {
 			compatible = "renesas,pcie-r8a77965",
 				     "renesas,pcie-rcar-gen3";
@@ -2828,6 +2862,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -2895,10 +2930,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso b/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso
index 9450d8ac94cb..ecb35257b9ae 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso
@@ -70,7 +70,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		vin0_adv7612_en {
+		vin0-adv7612-en-hog {
 			gpio-hog;
 			gpios = <3 GPIO_ACTIVE_LOW>;
 			output-high;
@@ -170,7 +170,24 @@
 	};
 };
 
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&d3p3>;
+	vqmmc-supply = <&d1p8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
 &pfc {
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
 	vin0_pins_parallel: vin0 {
 		groups = "vin0_data12", "vin0_sync", "vin0_clk", "vin0_clkenb";
 		function = "vin0";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 32f07aa27316..b7328f9f7d4b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -409,6 +409,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -416,3 +417,8 @@
 &scif_clk {
 	clock-frequency = <14745600>;
 };
+
+/* Firmware should reserve it but sadly doesn't */
+&swdt {
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 118e77f4477e..f18d26360610 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -146,7 +146,6 @@
 
 	hdmi@39 {
 		compatible = "adi,adv7511w";
-		#sound-dai-cells = <0>;
 		reg = <0x39>;
 		interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
 		avdd-supply = <&vcc_d1_8v>;
@@ -293,9 +292,20 @@
 	};
 };
 
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
+
+/* Firmware should reserve it but sadly doesn't */
+&swdt {
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 38145fd6acf0..1007ee48adc3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -15,6 +15,7 @@
 	compatible = "renesas,r8a77970";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/* External CAN clock - to be overridden by boards that provide it */
 	can_clk: can {
@@ -60,6 +61,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -67,12 +69,13 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a53_0>, <&a53_1>;
 	};
 
@@ -90,7 +93,7 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -107,6 +110,16 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a77970-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A77970_CLK_OSC>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 401>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77970",
 				     "renesas,rcar-gen3-gpio";
@@ -200,6 +213,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a77970";
 			reg = <0 0xe6060000 0 0x504>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -280,11 +294,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a77970-rst";
 			reg = <0 0xe6160000 0 0x200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -562,7 +578,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A77970_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -1196,6 +1212,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -1220,10 +1237,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index b409a8d1737e..2da63b4daa0a 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -138,7 +138,6 @@
 
 	hdmi@39 {
 		compatible = "adi,adv7511w";
-		#sound-dai-cells = <0>;
 		reg = <0x39>;
 		interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
 		avdd-supply = <&vcc1v8_d4>;
@@ -282,6 +281,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 55a6c622f873..8cd7f68d026b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -15,6 +15,7 @@
 	compatible = "renesas,r8a77980";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/* External CAN clock - to be overridden by boards that provide it */
 	can_clk: can {
@@ -80,6 +81,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -87,6 +89,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -98,10 +101,10 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
 	};
 
@@ -119,7 +122,7 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
 
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -229,6 +232,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a77980";
 			reg = <0 0xe6060000 0 0x50c>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -309,11 +313,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a77980-rst";
 			reg = <0 0xe6160000 0 0x200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -615,7 +621,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A77980_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -1579,6 +1585,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -1624,14 +1631,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-				       IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
-				       IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
-				       IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
-				       IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 233af3081e84..d3698f7e494d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -13,6 +13,7 @@
 	compatible = "renesas,r8a77990";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -47,16 +48,20 @@
 	cluster1_opp: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
+
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1030000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1030000>;
 			clock-latency-ns = <300000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1030000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
@@ -118,6 +123,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	/* External PCIe clock - can be overridden by the board */
@@ -129,8 +135,8 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&a53_0>, <&a53_1>;
 	};
 
@@ -148,7 +154,8 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -164,6 +171,16 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a77990-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A77990_CLK_OSC>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 401>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77990",
 				     "renesas,rcar-gen3-gpio";
@@ -272,6 +289,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a77990";
 			reg = <0 0xe6060000 0 0x508>;
+			bootph-all;
 		};
 
 		i2c_dvfs: i2c@e60b0000 {
@@ -368,11 +386,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a77990-rst";
 			reg = <0 0xe6160000 0 0x0200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1051,7 +1071,7 @@
 			       <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
@@ -2117,6 +2137,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -2153,10 +2174,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 5f0828a4675b..5f3fcef7560c 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -14,6 +14,7 @@
 	compatible = "renesas,r8a77995";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/*
 	 * The external audio clocks are configured as 0 Hz fixed frequency
@@ -65,11 +66,12 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	psci {
@@ -85,7 +87,8 @@
 
 	soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -101,6 +104,16 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a77995-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A77995_CLK_OSC>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 401>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77995",
 				     "renesas,rcar-gen3-gpio";
@@ -209,6 +222,7 @@
 		pfc: pinctrl@e6060000 {
 			compatible = "renesas,pfc-r8a77995";
 			reg = <0 0xe6060000 0 0x508>;
+			bootph-all;
 		};
 
 		cmt0: timer@e60f0000 {
@@ -289,11 +303,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a77995-rst";
 			reg = <0 0xe6160000 0 0x0200>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -1448,6 +1464,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -1472,10 +1489,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index e8c8fca48b69..0916fd57d1f1 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -348,6 +348,7 @@
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	uart-has-rtscts;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-ethernet.dtsi
index e11bf9ace776..2a8537e13873 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-ethernet.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-ethernet.dtsi
@@ -5,6 +5,121 @@
  * Copyright (C) 2021 Glider bv
  */
 
+/ {
+	aliases {
+		ethernet1 = &avb1;
+		ethernet2 = &avb2;
+		ethernet3 = &avb3;
+		ethernet4 = &avb4;
+		ethernet5 = &avb5;
+	};
+};
+
+&avb1 {
+	pinctrl-0 = <&avb1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb1_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		avb1_phy: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <7>;
+			interrupts-extended = <&gpio5 16 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&avb2 {
+	pinctrl-0 = <&avb2_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb2_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		avb2_phy: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <7>;
+			interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&avb3 {
+	pinctrl-0 = <&avb3_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb3_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		avb3_phy: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <7>;
+			interrupts-extended = <&gpio7 16 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&avb4 {
+	pinctrl-0 = <&avb4_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb4_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio8 15 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		avb4_phy: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <7>;
+			interrupts-extended = <&gpio8 16 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&avb5 {
+	pinctrl-0 = <&avb5_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb5_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio9 15 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		avb5_phy: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <7>;
+			interrupts-extended = <&gpio9 16 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
 &i2c0 {
 	eeprom@53 {
 		compatible = "rohm,br24g01", "atmel,24c01";
@@ -13,3 +128,130 @@
 		pagesize = <8>;
 	};
 };
+
+&pfc {
+	avb1_pins: avb1 {
+		mux {
+			groups = "avb1_link", "avb1_mdio", "avb1_rgmii",
+				 "avb1_txcrefclk";
+			function = "avb1";
+		};
+
+		link {
+			groups = "avb1_link";
+			bias-disable;
+		};
+
+		mdio {
+			groups = "avb1_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "avb1_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+	};
+
+	avb2_pins: avb2 {
+		mux {
+			groups = "avb2_link", "avb2_mdio", "avb2_rgmii",
+				 "avb2_txcrefclk";
+			function = "avb2";
+		};
+
+		link {
+			groups = "avb2_link";
+			bias-disable;
+		};
+
+		mdio {
+			groups = "avb2_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "avb2_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+	};
+
+	avb3_pins: avb3 {
+		mux {
+			groups = "avb3_link", "avb3_mdio", "avb3_rgmii",
+				 "avb3_txcrefclk";
+			function = "avb3";
+		};
+
+		link {
+			groups = "avb3_link";
+			bias-disable;
+		};
+
+		mdio {
+			groups = "avb3_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "avb3_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+	};
+
+	avb4_pins: avb4 {
+		mux {
+			groups = "avb4_link", "avb4_mdio", "avb4_rgmii",
+				 "avb4_txcrefclk";
+			function = "avb4";
+		};
+
+		link {
+			groups = "avb4_link";
+			bias-disable;
+		};
+
+		mdio {
+			groups = "avb4_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "avb4_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+	};
+
+	avb5_pins: avb5 {
+		mux {
+			groups = "avb5_link", "avb5_mdio", "avb5_rgmii",
+				 "avb5_txcrefclk";
+			function = "avb5";
+		};
+
+		link {
+			groups = "avb5_link";
+			bias-disable;
+		};
+
+		mdio {
+			groups = "avb5_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "avb5_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 7156b1a542e8..4b101a6dc49d 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -13,6 +13,7 @@
 	compatible = "renesas,r8a779a0";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/* External CAN clock - to be overridden by boards that provide it */
 	can_clk: can {
@@ -47,6 +48,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -54,11 +56,12 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	pmu_a76 {
 		compatible = "arm,cortex-a76-pmu";
-		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/* External SCIF clock - to be overridden by boards that provide it */
@@ -70,7 +73,8 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -86,6 +90,16 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a779a0-wdt", "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A779A0_CLK_OSC>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 1128>;
+			status = "disabled";
+		};
+
 		pfc: pinctrl@e6050000 {
 			compatible = "renesas,pfc-r8a779a0";
 			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
@@ -93,6 +107,7 @@
 			      <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>,
 			      <0 0xe6068000 0 0x16c>, <0 0xe6068800 0 0x16c>,
 			      <0 0xe6069000 0 0x16c>, <0 0xe6069800 0 0x16c>;
+			bootph-all;
 		};
 
 		gpio0: gpio@e6058180 {
@@ -331,11 +346,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a779a0-rst";
 			reg = <0 0xe6160000 0 0x4000>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -765,8 +782,6 @@
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds1 1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -814,8 +829,6 @@
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds1 2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -863,8 +876,6 @@
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds1 3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -912,8 +923,6 @@
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds1 4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -961,8 +970,6 @@
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds1 11>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -2330,6 +2337,23 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		gpu: gpu@fd000000 {
+			compatible = "renesas,r8a779a0-gpu",
+				     "img,img-ge7800",
+				     "img,img-rogue";
+			reg = <0 0xfd000000 0 0x40000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A779A0_CLK_ZG>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S3D1>,
+				 <&cpg CPG_MOD 0>;
+			clock-names = "core", "mem", "sys";
+			power-domains = <&sysc R8A779A0_PD_3DG_A>,
+					<&sysc R8A779A0_PD_3DG_B>;
+			power-domain-names = "a", "b";
+			resets = <&cpg 0>;
+			status = "disabled";
+		};
+
 		fcpvd0: fcp@fea10000 {
 			compatible = "renesas,fcpv";
 			reg = <0 0xfea10000 0 0x200>;
@@ -2348,6 +2372,42 @@
 			iommus = <&ipmmu_vi1 7>;
 		};
 
+		fcpvx0: fcp@fedb0000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfedb0000 0 0x200>;
+			clocks = <&cpg CPG_MOD 1100>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+			resets = <&cpg 1100>;
+			iommus = <&ipmmu_vi1 24>;
+		};
+
+		fcpvx1: fcp@fedb8000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfedb8000 0 0x200>;
+			clocks = <&cpg CPG_MOD 1101>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+			resets = <&cpg 1101>;
+			iommus = <&ipmmu_vi1 25>;
+		};
+
+		fcpvx2: fcp@fedc0000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfedc0000 0 0x200>;
+			clocks = <&cpg CPG_MOD 1102>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
+			resets = <&cpg 1102>;
+			iommus = <&ipmmu_vi1 26>;
+		};
+
+		fcpvx3: fcp@fedc8000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfedc8000 0 0x200>;
+			clocks = <&cpg CPG_MOD 1103>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
+			resets = <&cpg 1103>;
+			iommus = <&ipmmu_vi1 27>;
+		};
+
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
 			reg = <0 0xfea20000 0 0x5000>;
@@ -2370,6 +2430,50 @@
 			renesas,fcp = <&fcpvd1>;
 		};
 
+		vspx0: vsp@fedd0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfedd0000 0 0x8000>;
+			interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1028>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+			resets = <&cpg 1028>;
+
+			renesas,fcp = <&fcpvx0>;
+		};
+
+		vspx1: vsp@fedd8000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfedd8000 0 0x8000>;
+			interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1029>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+			resets = <&cpg 1029>;
+
+			renesas,fcp = <&fcpvx1>;
+		};
+
+		vspx2: vsp@fede0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfede0000 0 0x8000>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1030>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
+			resets = <&cpg 1030>;
+
+			renesas,fcp = <&fcpvx2>;
+		};
+
+		vspx3: vsp@fede8000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfede8000 0 0x8000>;
+			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1031>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
+			resets = <&cpg 1031>;
+
+			renesas,fcp = <&fcpvx3>;
+		};
+
 		csi40: csi2@feaa0000 {
 			compatible = "renesas,r8a779a0-csi2";
 			reg = <0 0xfeaa0000 0 0x10000>;
@@ -2511,13 +2615,20 @@
 		isp0: isp@fed00000 {
 			compatible = "renesas,r8a779a0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed00000 0 0x10000>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 612>;
+			reg = <0 0xfed00000 0 0x10000>, <0 0xfec00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 612>, <&cpg CPG_MOD 16>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
-			resets = <&cpg 612>;
+			resets = <&cpg 612>, <&cpg 16>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx0>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2595,13 +2706,20 @@
 		isp1: isp@fed20000 {
 			compatible = "renesas,r8a779a0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed20000 0 0x10000>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 613>;
+			reg = <0 0xfed20000 0 0x10000>, <0 0xfee00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 613>, <&cpg CPG_MOD 17>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
-			resets = <&cpg 613>;
+			resets = <&cpg 613>, <&cpg 17>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx1>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2679,13 +2797,20 @@
 		isp2: isp@fed30000 {
 			compatible = "renesas,r8a779a0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed30000 0 0x10000>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 614>;
+			reg = <0 0xfed30000 0 0x10000>, <0 0xfef00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 614>, <&cpg CPG_MOD 18>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
-			resets = <&cpg 614>;
+			resets = <&cpg 614>, <&cpg 18>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx2>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2763,13 +2888,20 @@
 		isp3: isp@fed40000 {
 			compatible = "renesas,r8a779a0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed40000 0 0x10000>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 615>;
+			reg = <0 0xfed40000 0 0x10000>, <0 0xfe400000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 615>, <&cpg CPG_MOD 19>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
-			resets = <&cpg 615>;
+			resets = <&cpg 615>, <&cpg 19>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx3>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2844,7 +2976,7 @@
 			};
 		};
 
-		dsi0: dsi-encoder@fed80000 {
+		dsi0: dsi@fed80000 {
 			compatible = "renesas,r8a779a0-dsi-csi2-tx";
 			reg = <0 0xfed80000 0 0x10000>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2872,7 +3004,7 @@
 			};
 		};
 
-		dsi1: dsi-encoder@fed90000 {
+		dsi1: dsi@fed90000 {
 			compatible = "renesas,r8a779a0-dsi-csi2-tx";
 			reg = <0 0xfed90000 0 0x10000>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2903,6 +3035,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -2980,11 +3113,11 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
 				  "hyp-virt";
 	};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
index e03baefb6a98..1781bb79a619 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
@@ -101,6 +101,7 @@
 &hscif0 {
 	pinctrl-0 = <&hscif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	uart-has-rtscts;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
index 5d38669ed1ec..ad2b0398d354 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
@@ -5,6 +5,14 @@
  * Copyright (C) 2021 Renesas Electronics Corp.
  */
 
+/ {
+	aliases {
+		ethernet0 = &rswitch_port0;
+		ethernet1 = &rswitch_port1;
+		ethernet2 = &rswitch_port2;
+	};
+};
+
 &eth_serdes {
 	status = "okay";
 };
@@ -42,61 +50,61 @@
 	pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>, <&tsn2_pins>;
 	pinctrl-names = "default";
 	status = "okay";
+};
+
+&rswitch_port0 {
+	reg = <0>;
+	phy-handle = <&u101>;
+	phy-mode = "sgmii";
+	phys = <&eth_serdes 0>;
+	status = "okay";
 
-	ethernet-ports {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			phy-handle = <&u101>;
-			phy-mode = "sgmii";
-			phys = <&eth_serdes 0>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				u101: ethernet-phy@1 {
-					reg = <1>;
-					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupts-extended = <&gpio3 10 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-		};
-		port@1 {
+		u101: ethernet-phy@1 {
 			reg = <1>;
-			phy-handle = <&u201>;
-			phy-mode = "sgmii";
-			phys = <&eth_serdes 1>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				u201: ethernet-phy@2 {
-					reg = <2>;
-					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupts-extended = <&gpio3 11 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts-extended = <&gpio3 10 IRQ_TYPE_LEVEL_LOW>;
 		};
-		port@2 {
+	};
+};
+
+&rswitch_port1 {
+	reg = <1>;
+	phy-handle = <&u201>;
+	phy-mode = "sgmii";
+	phys = <&eth_serdes 1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		u201: ethernet-phy@2 {
 			reg = <2>;
-			phy-handle = <&u301>;
-			phy-mode = "sgmii";
-			phys = <&eth_serdes 2>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				u301: ethernet-phy@3 {
-					reg = <3>;
-					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupts-extended = <&gpio3 9 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts-extended = <&gpio3 11 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&rswitch_port2 {
+	reg = <2>;
+	phy-handle = <&u301>;
+	phy-mode = "sgmii";
+	phys = <&eth_serdes 2>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		u301: ethernet-phy@3 {
+			reg = <3>;
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts-extended = <&gpio3 9 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index 054498e54730..0ebf8e5dd2f9 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -13,6 +13,7 @@
 	compatible = "renesas,r8a779f0";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	cluster01_opp: opp-table-0 {
 		compatible = "operating-points-v2";
@@ -253,6 +254,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -260,6 +262,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	pcie0_clkref: pcie0-clkref {
@@ -278,7 +281,7 @@
 
 	pmu_a55 {
 		compatible = "arm,cortex-a55-pmu";
-		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -295,7 +298,8 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -311,10 +315,21 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a779f0-wdt", "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_OSC>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1128>;
+			status = "disabled";
+		};
+
 		pfc: pinctrl@e6050000 {
 			compatible = "renesas,pfc-r8a779f0";
 			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
 			      <0 0xe6051000 0 0x16c>, <0 0xe6051800 0 0x16c>;
+			bootph-all;
 		};
 
 		gpio0: gpio@e6050180 {
@@ -463,11 +478,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a779f0-rst";
 			reg = <0 0xe6160000 0 0x4000>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -974,17 +991,20 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				rswitch_port0: port@0 {
 					reg = <0>;
 					phys = <&eth_serdes 0>;
+					status = "disabled";
 				};
-				port@1 {
+				rswitch_port1: port@1 {
 					reg = <1>;
 					phys = <&eth_serdes 1>;
+					status = "disabled";
 				};
-				port@2 {
+				rswitch_port2: port@2 {
 					reg = <2>;
 					phys = <&eth_serdes 2>;
+					status = "disabled";
 				};
 			};
 		};
@@ -1280,6 +1300,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -1329,11 +1350,11 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
 				  "hyp-virt";
 	};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
index 5d71d52f9c65..67b18f2bffbd 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
@@ -22,7 +22,8 @@
 		i2c5 = &i2c5;
 		serial0 = &hscif0;
 		serial1 = &hscif1;
-		ethernet0 = &rswitch;
+		ethernet0 = &rswitch_port0;
+		ethernet1 = &rswitch_port1;
 	};
 
 	chosen {
@@ -67,6 +68,7 @@
 &hscif0 {
 	pinctrl-0 = <&hscif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	uart-has-rtscts;
 	status = "okay";
@@ -179,49 +181,42 @@
 	pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
+};
+
+&rswitch_port0 {
+	reg = <0>;
+	phy-handle = <&ic99>;
+	phy-mode = "sgmii";
+	phys = <&eth_serdes 0>;
+	status = "okay";
 
-	ethernet-ports {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			phy-handle = <&ic99>;
-			phy-mode = "sgmii";
-			phys = <&eth_serdes 0>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ic99: ethernet-phy@1 {
-					reg = <1>;
-					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupts-extended = <&gpio3 10 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-		};
-
-		port@1 {
+		ic99: ethernet-phy@1 {
 			reg = <1>;
-			phy-handle = <&ic102>;
-			phy-mode = "sgmii";
-			phys = <&eth_serdes 1>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ic102: ethernet-phy@2 {
-					reg = <2>;
-					compatible = "ethernet-phy-ieee802.3-c45";
-					interrupts-extended = <&gpio3 11 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts-extended = <&gpio3 10 IRQ_TYPE_LEVEL_LOW>;
 		};
+	};
+};
+
+&rswitch_port1 {
+	reg = <1>;
+	phy-handle = <&ic102>;
+	phy-mode = "sgmii";
+	phys = <&eth_serdes 1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		port@2 {
-			status = "disabled";
+		ic102: ethernet-phy@2 {
+			reg = <2>;
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts-extended = <&gpio3 11 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a779f4.dtsi b/arch/arm64/boot/dts/renesas/r8a779f4.dtsi
index ebed41892df3..b216d605c321 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f4.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f4.dtsi
@@ -10,3 +10,20 @@
 / {
 	compatible = "renesas,r8a779f4", "renesas,r8a779f0";
 };
+
+&fuse {
+	nvmem-layout {
+		compatible = "fixed-layout";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ufs_tune: calib@144 {
+			reg = <0x144 0x08>;
+		};
+	};
+};
+
+&ufs {
+	nvmem-cells = <&ufs_tune>;
+	nvmem-cell-names = "calibration";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 61c6b8022ffd..ff2bd1908a45 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -13,6 +13,7 @@
 	compatible = "renesas,r8a779g0";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/* External Audio clock - to be overridden by boards that provide it */
 	audio_clkin: audio_clkin {
@@ -166,6 +167,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr {
@@ -173,6 +175,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	pcie0_clkref: pcie0-clkref {
@@ -191,7 +194,7 @@
 
 	pmu_a76 {
 		compatible = "arm,cortex-a76-pmu";
-		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -214,7 +217,8 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -230,6 +234,16 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a779g0-wdt", "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_OSC>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 1128>;
+			status = "disabled";
+		};
+
 		pfc: pinctrl@e6050000 {
 			compatible = "renesas,pfc-r8a779g0";
 			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
@@ -237,6 +251,7 @@
 			      <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>,
 			      <0 0xe6061000 0 0x16c>, <0 0xe6061800 0 0x16c>,
 			      <0 0xe6068000 0 0x16c>;
+			bootph-all;
 		};
 
 		gpio0: gpio@e6050180 {
@@ -452,11 +467,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a779g0-rst";
 			reg = <0 0xe6160000 0 0x4000>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -791,6 +808,16 @@
 					<0 0 0 4 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
 			snps,enable-cdm-check;
 			status = "disabled";
+
+			/* PCIe bridge, Root Port */
+			pciec0_rp: pci@0,0 {
+				#address-cells = <3>;
+				#size-cells = <2>;
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				compatible = "pciclass,0604";
+				device_type = "pci";
+				ranges;
+			};
 		};
 
 		pciec1: pcie@e65d8000 {
@@ -828,6 +855,16 @@
 					<0 0 0 4 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			snps,enable-cdm-check;
 			status = "disabled";
+
+			/* PCIe bridge, Root Port */
+			pciec1_rp: pci@0,0 {
+				#address-cells = <3>;
+				#size-cells = <2>;
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				compatible = "pciclass,0604";
+				device_type = "pci";
+				ranges;
+			};
 		};
 
 		pciec0_ep: pcie-ep@e65d0000 {
@@ -2171,6 +2208,24 @@
 			iommus = <&ipmmu_vi1 7>;
 		};
 
+		fcpvx0: fcp@fedb0000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfedb0000 0 0x200>;
+			clocks = <&cpg CPG_MOD 1100>;
+			power-domains = <&sysc R8A779G0_PD_A3ISP0>;
+			resets = <&cpg 1100>;
+			iommus = <&ipmmu_vi1 24>;
+		};
+
+		fcpvx1: fcp@fedb8000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfedb8000 0 0x200>;
+			clocks = <&cpg CPG_MOD 1101>;
+			power-domains = <&sysc R8A779G0_PD_A3ISP1>;
+			resets = <&cpg 1101>;
+			iommus = <&ipmmu_vi1 25>;
+		};
+
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
 			reg = <0 0xfea20000 0 0x7000>;
@@ -2193,6 +2248,28 @@
 			renesas,fcp = <&fcpvd1>;
 		};
 
+		vspx0: vsp@fedd0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfedd0000 0 0x8000>;
+			interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1028>;
+			power-domains = <&sysc R8A779G0_PD_A3ISP0>;
+			resets = <&cpg 1028>;
+
+			renesas,fcp = <&fcpvx0>;
+		};
+
+		vspx1: vsp@fedd8000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfedd8000 0 0x8000>;
+			interrupts = <GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1029>;
+			power-domains = <&sysc R8A779G0_PD_A3ISP1>;
+			resets = <&cpg 1029>;
+
+			renesas,fcp = <&fcpvx1>;
+		};
+
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a779g0";
 			reg = <0 0xfeb00000 0 0x40000>;
@@ -2230,13 +2307,20 @@
 		isp0: isp@fed00000 {
 			compatible = "renesas,r8a779g0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed00000 0 0x10000>;
-			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&cpg CPG_MOD 612>;
+			reg = <0 0xfed00000 0 0x10000>, <0 0xfec00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 612>, <&cpg CPG_MOD 16>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779G0_PD_A3ISP0>;
-			resets = <&cpg 612>;
+			resets = <&cpg 612>, <&cpg 16>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx0>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2314,13 +2398,20 @@
 		isp1: isp@fed20000 {
 			compatible = "renesas,r8a779g0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed20000 0 0x10000>;
-			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&cpg CPG_MOD 613>;
+			reg = <0 0xfed20000 0 0x10000>, <0 0xfee00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 613>, <&cpg CPG_MOD 17>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779G0_PD_A3ISP1>;
-			resets = <&cpg 613>;
+			resets = <&cpg 613>, <&cpg 17>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx1>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2395,7 +2486,7 @@
 			};
 		};
 
-		dsi0: dsi-encoder@fed80000 {
+		dsi0: dsi@fed80000 {
 			compatible = "renesas,r8a779g0-dsi-csi2-tx";
 			reg = <0 0xfed80000 0 0x10000>;
 			clocks = <&cpg CPG_MOD 415>,
@@ -2424,7 +2515,7 @@
 			};
 		};
 
-		dsi1: dsi-encoder@fed90000 {
+		dsi1: dsi@fed90000 {
 			compatible = "renesas,r8a779g0-dsi-csi2-tx";
 			reg = <0 0xfed90000 0 0x10000>;
 			clocks = <&cpg CPG_MOD 416>,
@@ -2456,6 +2547,7 @@
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -2519,11 +2611,11 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
 				  "hyp-virt";
 	};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts
index 0062362b0ba0..48befde38937 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts
@@ -7,70 +7,10 @@
 
 /dts-v1/;
 #include "r8a779g2.dtsi"
-#include "white-hawk-cpu-common.dtsi"
-#include "white-hawk-common.dtsi"
+#include "white-hawk-single.dtsi"
 
 / {
 	model = "Renesas White Hawk Single board based on r8a779g2";
 	compatible = "renesas,white-hawk-single", "renesas,r8a779g2",
 		     "renesas,r8a779g0";
 };
-
-&hscif0 {
-	uart-has-rtscts;
-};
-
-&hscif0_pins {
-	groups = "hscif0_data", "hscif0_ctrl";
-	function = "hscif0";
-};
-
-&pfc {
-	tsn0_pins: tsn0 {
-		mux {
-			groups = "tsn0_link", "tsn0_mdio", "tsn0_rgmii",
-				 "tsn0_txcrefclk";
-			function = "tsn0";
-		};
-
-		link {
-			groups = "tsn0_link";
-			bias-disable;
-		};
-
-		mdio {
-			groups = "tsn0_mdio";
-			drive-strength = <24>;
-			bias-disable;
-		};
-
-		rgmii {
-			groups = "tsn0_rgmii";
-			drive-strength = <24>;
-			bias-disable;
-		};
-	};
-};
-
-&tsn0 {
-	pinctrl-0 = <&tsn0_pins>;
-	pinctrl-names = "default";
-	phy-mode = "rgmii";
-	phy-handle = <&phy3>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		reset-post-delay-us = <4000>;
-
-		phy3: ethernet-phy@0 {
-			compatible = "ethernet-phy-id002b.0980",
-				     "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			interrupts-extended = <&gpio4 3 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx219.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx219.dtso
new file mode 100644
index 000000000000..3acaf714cf24
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx219.dtso
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX219 camera sensor on connector J1 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+	clk_cam_j1: clk-cam-j1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	/* Page 29 / CSI_IF_CN / J1 */
+	reg_cam_j1: reg-cam-j1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam-J1";
+		enable-active-high;
+		gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	cam@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+
+		clocks = <&clk_cam_j1>;
+
+		VANA-supply = <&reg_cam_j1>;
+		VDIG-supply = <&reg_cam_j1>;
+		VDDL-supply = <&reg_cam_j1>;
+
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			imx219_j1_out: endpoint {
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <456000000>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi40_in>;
+			};
+		};
+	};
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&imx219_j1_out>;
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso
new file mode 100644
index 000000000000..a19bc0840392
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX462 camera sensor on connector J1 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+	clk_cam_j1: clk-cam-j1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <37125000>;
+	};
+
+	/* Page 29 / CSI_IF_CN / J1 */
+	reg_cam_j1: reg-cam-j1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam-J1";
+		enable-active-high;
+		gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	cam@1a {
+		compatible = "sony,imx462lqr";
+		reg = <0x1a>;
+
+		clocks = <&clk_cam_j1>;
+		clock-names = "xclk";
+		clock-frequency = <37125000>;
+
+		vdddo-supply = <&reg_cam_j1>;
+		vdda-supply = <&reg_cam_j1>;
+		vddd-supply = <&reg_cam_j1>;
+
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			imx462_j1_out: endpoint {
+				link-frequencies = /bits/ 64 <222750000 148500000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csi40_in>;
+			};
+		};
+	};
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&imx462_j1_out>;
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx219.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx219.dtso
new file mode 100644
index 000000000000..512810b861aa
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx219.dtso
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX219 camera sensor on connector J2 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+	clk_cam_j2: clk-cam-j2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	/* Page 29 / CSI_IF_CN / J2 */
+	reg_cam_j2: reg-cam-j2 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam-J2";
+		enable-active-high;
+		gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	cam@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+
+		clocks = <&clk_cam_j2>;
+
+		VANA-supply = <&reg_cam_j2>;
+		VDIG-supply = <&reg_cam_j2>;
+		VDDL-supply = <&reg_cam_j2>;
+
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			imx219_j2_out: endpoint {
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <456000000>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi41_in>;
+			};
+		};
+	};
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi41 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi41_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&imx219_j2_out>;
+			};
+		};
+	};
+};
+
+&isp1 {
+	status = "okay";
+};
+
+&vin08 {
+	status = "okay";
+};
+
+&vin09 {
+	status = "okay";
+};
+
+&vin10 {
+	status = "okay";
+};
+
+&vin11 {
+	status = "okay";
+};
+
+&vin12 {
+	status = "okay";
+};
+
+&vin13 {
+	status = "okay";
+};
+
+&vin14 {
+	status = "okay";
+};
+
+&vin15 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx462.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx462.dtso
new file mode 100644
index 000000000000..a31524b59834
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx462.dtso
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX462 camera sensor on connector J2 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+	clk_cam_j2: clk-cam-j2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <37125000>;
+	};
+
+	/* Page 29 / CSI_IF_CN / J2 */
+	reg_cam_j2: reg-cam-j2 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam-J2";
+		enable-active-high;
+		gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	cam@1a {
+		compatible = "sony,imx462lqr";
+		reg = <0x1a>;
+
+		clocks = <&clk_cam_j2>;
+		clock-names = "xclk";
+		clock-frequency = <37125000>;
+
+		vdddo-supply = <&reg_cam_j2>;
+		vdda-supply = <&reg_cam_j2>;
+		vddd-supply = <&reg_cam_j2>;
+
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			imx462_j2_out: endpoint {
+				link-frequencies = /bits/ 64 <222750000 148500000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csi41_in>;
+			};
+		};
+	};
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi41 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi41_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&imx462_j2_out>;
+			};
+		};
+	};
+};
+
+&isp1 {
+	status = "okay";
+};
+
+&vin08 {
+	status = "okay";
+};
+
+&vin09 {
+	status = "okay";
+};
+
+&vin10 {
+	status = "okay";
+};
+
+&vin11 {
+	status = "okay";
+};
+
+&vin12 {
+	status = "okay";
+};
+
+&vin13 {
+	status = "okay";
+};
+
+&vin14 {
+	status = "okay";
+};
+
+&vin15 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-argon40.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-argon40.dtso
new file mode 100644
index 000000000000..c730ef39c7d7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-argon40.dtso
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for the Argon40 HAT blower fan on connector CN7
+ * on R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
+ *
+ * Example usage:
+ *
+ * # Localize hwmon sysfs directory that matches the PWM fan,
+ * # enable the PWM fan, and configure the fan speed manually.
+ * r8a779g3-sparrow-hawk$ ls -1 /sys/devices/platform/pwm-fan-ext/hwmon/hwmon?/pwm?_enable
+ * /sys/devices/platform/pwm-fan-ext/hwmon/hwmon0/pwm1_enable
+ *
+ * # Select mode 2 , enable fan PWM and regulator and keep them enabled.
+ * # For details, see Linux Documentation/hwmon/pwm-fan.rst
+ * r8a779g3-sparrow-hawk$ echo 2 > /sys/devices/platform/pwm-fan-ext/hwmon/hwmon0/pwm1_enable
+ *
+ * # Configure PWM fan speed in range 0..255 , 0 is stopped , 255 is full speed .
+ * # Fan speed 101 is about 2/5 of the PWM fan speed:
+ * r8a779g3-sparrow-hawk$ echo 101 > /sys/devices/platform/pwm-fan-ext/hwmon/hwmon0/pwm1
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	pwm-fan-ext {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		/* PWM period: 33us ~= 30 kHz */
+		pwms = <&pwmhat 0 33334 0>;
+		/* Available cooling levels */
+		cooling-levels = <0 50 100 150 200 255>;
+		fan-shutdown-percent = <100>;
+	};
+};
+
+/* Page 31 / IO_CN */
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pwmhat: pwm@1a {
+		compatible = "argon40,fan-hat";
+		reg = <0x1a>;
+		#pwm-cells = <3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso
new file mode 100644
index 000000000000..fbfec57db11e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for the PWM controlled blower fan on connector J3:FAN
+ * on R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
+ *
+ * Example usage:
+ *
+ * # Localize hwmon sysfs directory that matches the PWM fan,
+ * # enable the PWM fan, and configure the fan speed manually.
+ * r8a779g3-sparrow-hawk$ ls -1 /sys/devices/platform/pwm-fan/hwmon/hwmon?/pwm?_enable
+ * /sys/devices/platform/pwm-fan/hwmon/hwmon4/pwm1_enable
+ *
+ * # Select mode 2 , enable fan PWM and regulator and keep them enabled.
+ * # For details, see Linux Documentation/hwmon/pwm-fan.rst
+ * r8a779g3-sparrow-hawk$ echo 2 > /sys/devices/platform/pwm-fan/hwmon/hwmon4/pwm1_enable
+ *
+ * # Configure PWM fan speed in range 0..255 , 0 is stopped , 255 is full speed .
+ * # Fan speed 101 is about 2/5 of the PWM fan speed:
+ * r8a779g3-sparrow-hawk$ echo 101 > /sys/devices/platform/pwm-fan/hwmon/hwmon4/pwm1
+ */
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Override default PWM fan settings. For a list of available properties,
+ * see schema Documentation/devicetree/bindings/hwmon/pwm-fan.yaml .
+ */
+&fan {
+	/* Available cooling levels */
+	cooling-levels = <0 50 100 150 200 255>;
+	/* Four pulses of tacho signal per one revolution */
+	pulses-per-revolution = <4>;
+	/* PWM period: 100us ~= 10 kHz */
+	pwms = <&pwm0 0 100000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-5in.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-5in.dtso
new file mode 100644
index 000000000000..bf7b531ae9d9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-5in.dtso
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for the RPi Display 2 5" MIPI DSI panel connected
+ * to J4:DSI on R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
+ */
+
+#include "r8a779g3-sparrow-hawk-rpi-display-2.dtsi"
+
+&panel {
+	compatible = "raspberrypi,dsi-5inch", "ilitek,ili9881c";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-7in.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-7in.dtso
new file mode 100644
index 000000000000..6ec47f213c0f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-7in.dtso
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for the RPi Display 2 7" MIPI DSI panel connected
+ * to J4:DSI on R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
+ */
+
+#include "r8a779g3-sparrow-hawk-rpi-display-2.dtsi"
+
+&panel {
+	compatible = "raspberrypi,dsi-7inch", "ilitek,ili9881c";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi
new file mode 100644
index 000000000000..733333b85a9d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for the RPi Display 2 MIPI DSI panel connected
+ * to J4:DSI on R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	display_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&mcu 0 255 0>;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "rpi-display";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_dsi_touch: regulator-dsi-touch {
+		compatible = "regulator-fixed";
+		gpio = <&mcu 1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "rpi-touch";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+	};
+};
+
+&i2c0_mux3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	mcu: gpio@45 {
+		compatible = "raspberrypi,touchscreen-panel-regulator-v2";
+		reg = <0x45>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#pwm-cells = <3>;
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		AVDD28-supply = <&reg_dsi_touch>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+	};
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		reg = <0>;
+		backlight = <&display_bl>;
+		power-supply = <&reg_display>;
+		reset-gpios = <&mcu 0 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
new file mode 100644
index 000000000000..ff07d984cbf2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
@@ -0,0 +1,944 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
+ */
+/*
+ * DA7212 Codec settings
+ *
+ * for Playback
+ *	> amixer set "Headphone" 40%
+ *	> amixer set "Headphone" on
+ *	> amixer set "Mixout Left DAC Left"  on
+ *	> amixer set "Mixout Right DAC Right" on
+ *	> aplay xxx.wav
+ *
+ * for Capture (Aux/Mic)
+ *
+ *		on/off (B)
+ *	CONN3 (HeadSet) ---+----> MSIOF1
+ *			   |
+ *	CONN4 AUX ---------+ on/off (A)
+ *
+ *	> amixer set "Mixin PGA" on
+ *	> amixer set "Mixin PGA" 50%
+ *	> amixer set "ADC" on
+ *	> amixer set "ADC" 80%
+ *	> amixer set "Aux" on				^
+ *	> amixer set "Aux" 80%				| (A)
+ *	> amixer set "Mixin Left Aux Left" on		|
+ *	> amixer set "Mixin Right Aux Right" on		v
+ *	> amixer set "Mic 1" on				^
+ *	> amixer set "Mic 1" 80%			| (B)
+ *	> amixer set "Mixin Left Mic 1" on		|
+ *	> amixer set "Mixin Right Mic 1" on		v
+ *	> arecord -f cd xxx.wav
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "r8a779g3.dtsi"
+
+/ {
+	model = "Retronix Sparrow Hawk board based on r8a779g3";
+	compatible = "retronix,sparrow-hawk", "renesas,r8a779g3",
+		     "renesas,r8a779g0";
+
+	aliases {
+		ethernet0 = &avb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &hscif0;
+		serial1 = &hscif1;
+		serial2 = &hscif3;
+		spi0 = &rpc;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:921600n8";
+	};
+
+	/* Page 31 / FAN */
+	fan: pwm-fan {
+		pinctrl-0 = <&irq4_pins>;
+		pinctrl-names = "default";
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		interrupts-extended = <&intc_ex 4 IRQ_TYPE_EDGE_FALLING>;
+		/*
+		 * The fan model connected to this device can be selected
+		 * by user. Set "cooling-levels" DT property to single 255
+		 * entry to force the fan PWM into constant HIGH, which
+		 * forces the fan to spin at maximum RPM, thus providing
+		 * maximum cooling to this device and protection against
+		 * misconfigured PWM duty cycle to the fan.
+		 *
+		 * User has to configure "pwms" and "pulses-per-revolution"
+		 * DT properties according to fan datasheet first, and then
+		 * extend "cooling-levels = <0 m n ... 255>" property to
+		 * achieve proper fan control compatible with fan model
+		 * installed by user.
+		 */
+		cooling-levels = <255>;
+		pulses-per-revolution = <2>;
+		pwms = <&pwm0 0 50000>;
+	};
+
+	/*
+	 * Page 15 / LPDDR5
+	 *
+	 * This configuration listed below is for the 8 GiB board variant
+	 * with MT62F1G64D8EK-023 WT:C LPDDR5 part populated on the board.
+	 *
+	 * A variant with 16 GiB MT62F2G64D8EK-023 WT:C part populated on
+	 * the board is automatically handled by the bootloader, which
+	 * adjusts the correct DRAM size into the memory nodes below.
+	 */
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+
+	/* Page 27 / DSI to Display */
+	dp-con {
+		compatible = "dp-connector";
+		label = "CN6";
+		type = "full-size";
+
+		port {
+			dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+
+	/* Page 26 / PCIe.0/1 CLK */
+	pcie_refclk: clk-x8 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* Page 27 / DSI to Display */
+	sn65dsi86_refclk: clk-x9 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+
+	/* Page 30 / Audio_Codec */
+	sound_card: sound {
+		compatible = "audio-graph-card2";
+		links = <&msiof1_snd>;
+	};
+
+	/* Page 17 uSD-Slot */
+	vcc_sdhi: regulator-vcc-sdhi {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio8 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <1800000 0>, <3300000 1>;
+	};
+};
+
+/* Use thermal-idle cooling for all SoC cores */
+&a76_0 {
+	#cooling-cells = <2>;
+
+	a76_0_thermal_idle: thermal-idle {
+		#cooling-cells = <2>;
+		duration-us = <10000>;
+		exit-latency-us = <500>;
+	};
+};
+
+&a76_1 {
+	a76_1_thermal_idle: thermal-idle {
+		#cooling-cells = <2>;
+		duration-us = <10000>;
+		exit-latency-us = <500>;
+	};
+};
+
+&a76_2 {
+	a76_2_thermal_idle: thermal-idle {
+		#cooling-cells = <2>;
+		duration-us = <10000>;
+		exit-latency-us = <500>;
+	};
+};
+
+&a76_3 {
+	a76_3_thermal_idle: thermal-idle {
+		#cooling-cells = <2>;
+		duration-us = <10000>;
+		exit-latency-us = <500>;
+	};
+};
+
+&audio_clkin {
+	clock-frequency = <24576000>;
+};
+
+/* Page 22 / Ether_AVB0 */
+&avb0 {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb0_phy>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		avb0_phy: ethernet-phy@0 {	/* KSZ9031RNXVB */
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			rxc-skew-ps = <1500>;
+			reg = <0>;
+			/* AVB0_PHY_INT_V */
+			interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
+			/* GP7_10/AVB0_RESETN_V */
+			reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+/* Page 28 / CANFD_IF */
+&can_clk {
+	clock-frequency = <40000000>;
+};
+
+/* Page 28 / CANFD_IF */
+&canfd {
+	pinctrl-0 = <&canfd3_pins>, <&canfd4_pins>, <&can_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	channel3 {
+		status = "okay";
+	};
+
+	channel4 {
+		status = "okay";
+	};
+};
+
+/* Page 27 / DSI to Display */
+&dsi1 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi1_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+/* Page 27 / DSI to Display */
+&du {
+	status = "okay";
+};
+
+/* Page 5 / R-Car V4H_INT_I2C */
+&extal_clk {	/* X3 */
+	clock-frequency = <16666666>;
+};
+
+/* Page 5 / R-Car V4H_INT_I2C */
+&extalr_clk {	/* X2 */
+	clock-frequency = <32768>;
+};
+
+/* Page 26 / 2230 Key M M.2 */
+&gpio4 {
+	/* 9FGV0441 nOE inputs 0 and 1 */
+	pcie-m2-oe-hog {
+		gpio-hog;
+		gpios = <21 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "PCIe-CLK-nOE-M2";
+	};
+
+	/* 9FGV0441 nOE inputs 2 and 3 */
+	pcie-usb-oe-hog {
+		gpio-hog;
+		gpios = <22 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "PCIe-CLK-nOE-USB";
+	};
+};
+
+/* Page 23 / DEBUG */
+&hscif0 {	/* FTDI ADBUS[3:0] */
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	bootph-all;
+
+	status = "okay";
+};
+
+/* Page 23 / DEBUG */
+&hscif1 {	/* FTDI BDBUS[3:0] */
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	status = "okay";
+};
+
+/* Page 24 / UART */
+&hscif3 {	/* CN7 pins 8 (TX) and 10 (RX) */
+	pinctrl-0 = <&hscif3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+/* Page 24 / I2C SWITCH */
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+
+	mux@71 {
+		compatible = "nxp,pca9544";	/* TCA9544 */
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_3p3v>;
+
+		i2c0_mux0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Page 27 / DSI to Display */
+			bridge@2c {
+				pinctrl-0 = <&irq0_pins>;
+				pinctrl-names = "default";
+
+				compatible = "ti,sn65dsi86";
+				reg = <0x2c>;
+
+				clocks = <&sn65dsi86_refclk>;
+				clock-names = "refclk";
+
+				interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>;
+
+				enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+				vccio-supply = <&reg_1p8v>;
+				vpll-supply = <&reg_1p8v>;
+				vcca-supply = <&reg_1p2v>;
+				vcc-supply = <&reg_1p2v>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						sn65dsi86_in: endpoint {
+							remote-endpoint = <&dsi1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						sn65dsi86_out: endpoint {
+							remote-endpoint = <&dp_con_in>;
+						};
+					};
+				};
+			};
+		};
+
+		i2c0_mux1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Page 30 / Audio_Codec */
+			codec@1a {
+				compatible = "dlg,da7212";
+
+				#sound-dai-cells = <0>;
+				reg = <0x1a>;
+
+				clocks = <&rcar_sound>;
+				clock-names = "mclk";
+
+				VDDA-supply   = <&reg_1p8v>;
+				VDDMIC-supply = <&reg_3p3v>;
+				VDDIO-supply  = <&reg_3p3v>;
+
+				port {
+					da7212_endpoint: endpoint {
+						bitclock-master;
+						frame-master;
+						remote-endpoint = <&msiof1_snd_endpoint>;
+					};
+				};
+			};
+		};
+
+		i2c0_mux2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Page 26 / PCIe.0/1 CLK */
+			pcie_clk: clk@68 {
+				compatible = "renesas,9fgv0441";
+				reg = <0x68>;
+				clocks = <&pcie_refclk>;
+				#clock-cells = <1>;
+			};
+		};
+
+		i2c0_mux3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* Page 29 / CSI_IF_CN / CAM_CN0 */
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+};
+
+/* Page 29 / CSI_IF_CN / CAM_CN1 */
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+};
+
+/* Page 31 / IO_CN */
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+};
+
+/* Page 31 / IO_CN */
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+};
+
+/* Page 18 / POWER_CORE and Page 19 / POWER_PMIC */
+&i2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c5_pins>;
+	pinctrl-names = "default";
+};
+
+/* Page 17 uSD-Slot */
+&mmc0 {
+	pinctrl-0 = <&sd_pins>;
+	pinctrl-1 = <&sd_uhs_pins>;
+	pinctrl-names = "default", "state_uhs";
+	bus-width = <4>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;	/* SD_CD */
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vcc_sdhi>;
+	status = "okay";
+};
+
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* ignore DT warning */
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+
+	msiof1_snd: port {
+		msiof1_snd_endpoint: endpoint {
+			remote-endpoint = <&da7212_endpoint>;
+		};
+	};
+};
+
+/* Page 26 / 2230 Key M M.2 */
+&pcie0_clkref {
+	status = "disabled";
+};
+
+&pciec0 {
+	clocks = <&cpg CPG_MOD 624>, <&pcie_clk 0>;
+	reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pciec0_rp {
+	clocks = <&pcie_clk 1>;
+	vpcie3v3-supply = <&reg_3p3v>;
+};
+
+/* Page 25 / PCIe to USB */
+&pcie1_clkref {
+	status = "disabled";
+};
+
+&pciec1 {
+	clocks = <&cpg CPG_MOD 625>, <&pcie_clk 2>;
+	/* uPD720201 is PCIe Gen2 x1 device */
+	num-lanes = <1>;
+	reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pciec1_rp {
+	clocks = <&pcie_clk 3>;
+	vpcie3v3-supply = <&reg_3p3v>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Page 22 / Ether_AVB0 */
+	avb0_pins: avb0 {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+				 "avb0_txcrefclk";
+			function = "avb0";
+		};
+
+		pins-mdio {
+			groups = "avb0_mdio";
+			drive-strength = <21>;
+		};
+
+		pins-mii {
+			groups = "avb0_rgmii";
+			drive-strength = <21>;
+		};
+
+		pins-vddq18-25-avb {
+			pins = "PIN_VDDQ_AVB0", "PIN_VDDQ_AVB1", "PIN_VDDQ_AVB2", "PIN_VDDQ_TSN0";
+			power-source = <1800>;
+		};
+	};
+
+	/* Page 28 / CANFD_IF */
+	can_clk_pins: can-clk {
+		groups = "can_clk";
+		function = "can_clk";
+	};
+
+	/* Page 28 / CANFD_IF */
+	canfd3_pins: canfd3 {
+		groups = "canfd3_data";
+		function = "canfd3";
+	};
+
+	/* Page 28 / CANFD_IF */
+	canfd4_pins: canfd4 {
+		groups = "canfd4_data";
+		function = "canfd4";
+	};
+
+	/* Page 23 / DEBUG */
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	/* Page 23 / DEBUG */
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	/* Page 24 / UART */
+	hscif3_pins: hscif3 {
+		groups = "hscif3_data_a";
+		function = "hscif3";
+	};
+
+	/* Page 24 / I2C SWITCH */
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	/* Page 29 / CSI_IF_CN / CAM_CN0 */
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	/* Page 29 / CSI_IF_CN / CAM_CN1 */
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	/* Page 31 / IO_CN */
+	i2c3_pins: i2c3 {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+
+	/* Page 31 / IO_CN */
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	/* Page 18 / POWER_CORE */
+	i2c5_pins: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	/* Page 27 / DSI to Display */
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0_a";
+		function = "intc_ex";
+	};
+
+	/* Page 31 / FAN */
+	irq4_pins: irq4 {
+		groups = "intc_ex_irq4_b";
+		function = "intc_ex";
+	};
+
+	/* Page 31 / FAN */
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+
+	/* Page 31 / CN7 pin 12 */
+	pwm1_pins: pwm1 {
+		groups = "pwm1_b";
+		function = "pwm1";
+	};
+
+	/* Page 31 / CN7 pin 32 */
+	pwm6_pins: pwm6 {
+		groups = "pwm6";
+		function = "pwm6";
+	};
+
+	/* Page 31 / CN7 pin 33 */
+	pwm7_pins: pwm7 {
+		groups = "pwm7";
+		function = "pwm7";
+	};
+
+	/* Page 16 / QSPI_FLASH */
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+		bootph-all;
+	};
+
+	/* Page 6 / SCIF_CLK_SOC_V */
+	scif_clk_pins: scif-clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	/* Page 17 uSD-Slot */
+	sd_pins: sd {
+		groups = "mmc_data4", "mmc_ctrl";
+		function = "mmc";
+		power-source = <3300>;
+	};
+
+	/* Page 17 uSD-Slot */
+	sd_uhs_pins: sd-uhs {
+		groups = "mmc_data4", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	/* Page 30 / Audio_Codec */
+	msiof1_pins: sound {
+		groups = "msiof1_clk", "msiof1_sync", "msiof1_txd", "msiof1_rxd";
+		function = "msiof1";
+	};
+
+	/* Page 30 / Audio_Codec */
+	sound_clk_pins: sound-clk {
+		groups = "audio_clkin", "audio_clkout";
+		function = "audio_clk";
+	};
+};
+
+/* Page 31 / FAN */
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Page 31 / CN7 pin 12 */
+&pwm1 {
+	pinctrl-0 = <&pwm1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Page 31 / CN7 pin 32 */
+&pwm6 {
+	pinctrl-0 = <&pwm6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Page 31 / CN7 pin 33 */
+&pwm7 {
+	pinctrl-0 = <&pwm7_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Page 30 / Audio_Codec */
+&rcar_sound {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* It is used for ADG output as DA7212_MCLK */
+
+	/* audio_clkout */
+	clock-frequency = <12288000>; /* 48 kHz groups */
+
+	status = "okay";
+};
+
+/* Page 16 / QSPI_FLASH */
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+	bootph-all;
+
+	status = "okay";
+
+	flash@0 {
+		/*
+		 * EVTA1 is populated with Spansion S25FS512S
+		 * EVTB1 is populated with Winbond W77Q51NW
+		 */
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		bootph-all;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+
+			user@1000000 {
+				reg = <0x1000000 0x2f80000>;
+			};
+
+			env1@3f80000 {
+				reg = <0x3f80000 0x40000>;
+			};
+
+			env2@3fc0000 {
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+/* Page 6 / SCIF_CLK_SOC_V */
+&scif_clk {	/* X12 */
+	clock-frequency = <24000000>;
+};
+
+/* THS sensors in SoC, critical temperature trip point is 100C */
+&sensor1_crit {
+	temperature = <100000>;
+};
+
+&sensor2_crit {
+	temperature = <100000>;
+};
+
+&sensor3_crit {
+	temperature = <100000>;
+};
+
+&sensor4_crit {
+	temperature = <100000>;
+};
+
+/* THS sensor in SoC near CA76 cores does more progressive cooling. */
+&sensor_thermal_ca76 {
+	critical-action = "shutdown";
+
+	cooling-maps {
+		/*
+		 * The cooling-device minimum and maximum parameters inversely
+		 * match opp-table-0 {} node entries in r8a779g0.dtsi, in other
+		 * words, 0 refers to 1.8 GHz OPP and 4 refers to 500 MHz OPP.
+		 * This is because they refer to cooling levels, where maximum
+		 * cooling level happens at 500 MHz OPP, when the CPU core is
+		 * running slowly and therefore generates least heat.
+		 */
+		map0 {
+			/* At 68C, inhibit 1.7 GHz and 1.8 GHz modes */
+			trip = <&sensor3_passive_low>;
+			cooling-device = <&a76_0 2 4>;
+			contribution = <128>;
+		};
+
+		map1 {
+			/* At 72C, inhibit 1.5 GHz mode */
+			trip = <&sensor3_passive_mid>;
+			cooling-device = <&a76_0 3 4>;
+			contribution = <256>;
+		};
+
+		map2 {
+			/* At 76C, start injecting idle states 0..80% of time */
+			trip = <&sensor3_passive_hi>;
+			cooling-device = <&a76_0_thermal_idle 0 80>,
+					 <&a76_1_thermal_idle 0 80>,
+					 <&a76_2_thermal_idle 0 80>,
+					 <&a76_3_thermal_idle 0 80>;
+			contribution = <512>;
+		};
+
+		map3 {
+			/* At 80C, inhibit 1.0 GHz mode */
+			trip = <&sensor3_passive_crit>;
+			cooling-device = <&a76_0 4 4>;
+			contribution = <1024>;
+		};
+	};
+
+	trips {
+		sensor3_passive_low: sensor3-passive-low {
+			temperature = <68000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		sensor3_passive_mid: sensor3-passive-mid {
+			temperature = <72000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		sensor3_passive_hi: sensor3-passive-hi {
+			temperature = <76000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		sensor3_passive_crit: sensor3-passive-crit {
+			temperature = <80000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+	};
+};
+
+&sensor_thermal_cnn {
+	critical-action = "shutdown";
+};
+
+&sensor_thermal_cr52 {
+	critical-action = "shutdown";
+};
+
+&sensor_thermal_ddr1 {
+	critical-action = "shutdown";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-white-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779g3-white-hawk-single.dts
new file mode 100644
index 000000000000..cd466d858854
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-white-hawk-single.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H ES3.0 White Hawk Single board
+ *
+ * Copyright (C) 2024 Glider bv
+ */
+
+/dts-v1/;
+#include "r8a779g3.dtsi"
+#include "white-hawk-single.dtsi"
+
+/ {
+	model = "Renesas White Hawk Single board based on r8a779g3";
+	compatible = "renesas,white-hawk-single", "renesas,r8a779g3",
+		     "renesas,r8a779g0";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3.dtsi b/arch/arm64/boot/dts/renesas/r8a779g3.dtsi
new file mode 100644
index 000000000000..0295858a0260
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H (R8A779G3) SoC
+ *
+ * Copyright (C) 2024 Glider bv
+ */
+
+#include "r8a779g0.dtsi"
+
+/ {
+	compatible = "renesas,r8a779g3", "renesas,r8a779g0";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
index 58eabcc7e0e0..1be7836c41f4 100644
--- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts
@@ -5,492 +5,13 @@
  * Copyright (C) 2023 Renesas Electronics Corp.
  * Copyright (C) 2024 Glider bv
  */
-/*
- * [How to use Sound]
- *
- * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture
- * at the same time. You need to switch the direction which is controlled
- * by the GP0_01 pin via amixer.
- *
- * Playback (CN9500)
- *	> amixer set "MUX" "Playback"	// for GP0_01
- *	> amixer set "DAC 1" 85%
- *	> aplay xxx.wav
- *
- * Capture (CN9501)
- *	> amixer set "MUX" "Capture"	// for GP0_01
- *	> amixer set "Mic 1" 80%
- *	> amixer set "ADC 1" on
- *	> amixer set 'ADC 1' 80%
- *	> arecord xxx hoge.wav
- */
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
 #include "r8a779h0.dtsi"
+#include "gray-hawk-single.dtsi"
 
 / {
 	model = "Renesas Gray Hawk Single board based on r8a779h0";
 	compatible = "renesas,gray-hawk-single", "renesas,r8a779h0";
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		serial0 = &hscif0;
-		serial1 = &hscif2;
-		ethernet0 = &avb0;
-	};
-
-	can_transceiver0: can-phy0 {
-		compatible = "nxp,tjr1443";
-		#phy-cells = <0>;
-		enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		max-bitrate = <5000000>;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:921600n8";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keys_pins>;
-		pinctrl-names = "default";
-
-		key-1 {
-			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_1>;
-			label = "SW47";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-
-		key-2 {
-			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_2>;
-			label = "SW48";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-
-		key-3 {
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW49";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-1 {
-			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-		};
-
-		led-2 {
-			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <2>;
-		};
-
-		led-3 {
-			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <3>;
-		};
-	};
-
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x78000000>;
-	};
-
-	memory@480000000 {
-		device_type = "memory";
-		reg = <0x4 0x80000000 0x1 0x80000000>;
-	};
-
-	pcie_clk: clk-9fgv0841-pci {
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-		#clock-cells = <0>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-			compatible = "regulator-fixed";
-			regulator-name = "fixed-1.8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "fixed-3.3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-	};
-
-	sound_mux: sound-mux {
-		compatible = "simple-audio-mux";
-		mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-		state-labels = "Playback", "Capture";
-	};
-
-	sound_card: sound {
-		compatible = "audio-graph-card2";
-		label = "rcar-sound";
-		aux-devs = <&sound_mux>; // for GP0_01
-
-		links = <&rsnd_port>; // AK4619 Audio Codec
-	};
-};
-
-&audio_clkin {
-	clock-frequency = <24576000>;
-};
-
-&avb0 {
-	pinctrl-0 = <&avb0_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&phy0>;
-	tx-internal-delay-ps = <2000>;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&can_clk {
-	clock-frequency = <40000000>;
-};
-
-&canfd {
-	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	channel0 {
-		status = "okay";
-		phys = <&can_transceiver0>;
-	};
-
-	channel1 {
-		status = "okay";
-	};
-};
-
-&extal_clk {
-	clock-frequency = <16666666>;
-};
-
-&extalr_clk {
-	clock-frequency = <32768>;
-};
-
-&gpio1 {
-	audio-power-hog {
-		gpio-hog;
-		gpios = <8 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "Audio-Power";
-	};
-};
-
-&hscif0 {
-	pinctrl-0 = <&hscif0_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&hscif2 {
-	pinctrl-0 = <&hscif2_pins>;
-	pinctrl-names = "default";
-
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	io_expander_a: gpio@20 {
-		compatible = "onnn,pca9654";
-		reg = <0x20>;
-		interrupts-extended = <&gpio0 0 IRQ_TYPE_LEVEL_LOW>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	eeprom@50 {
-		compatible = "rohm,br24g01", "atmel,24c01";
-		label = "cpu-board";
-		reg = <0x50>;
-		pagesize = <8>;
-	};
-
-	eeprom@51 {
-		compatible = "rohm,br24g01", "atmel,24c01";
-		label = "breakout-board";
-		reg = <0x51>;
-		pagesize = <8>;
-	};
-
-	eeprom@52 {
-		compatible = "rohm,br24g01", "atmel,24c01";
-		label = "csi-dsi-sub-board-id";
-		reg = <0x52>;
-		pagesize = <8>;
-	};
-
-	eeprom@53 {
-		compatible = "rohm,br24g01", "atmel,24c01";
-		label = "ethernet-sub-board-id";
-		reg = <0x53>;
-		pagesize = <8>;
-	};
-};
-
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	codec@10 {
-		compatible = "asahi-kasei,ak4619";
-		reg = <0x10>;
-
-		clocks = <&rcar_sound>;
-		clock-names = "mclk";
-
-		#sound-dai-cells = <0>;
-		port {
-			ak4619_endpoint: endpoint {
-				remote-endpoint = <&rsnd_endpoint>;
-			};
-		};
-	};
-};
-
-&mmc0 {
-	pinctrl-0 = <&mmc_pins>;
-	pinctrl-1 = <&mmc_pins>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	bus-width = <8>;
-	no-sd;
-	no-sdio;
-	non-removable;
-	full-pwr-cycle-in-suspend;
-	status = "okay";
-};
-
-&pcie0_clkref {
-	compatible = "gpio-gate-clock";
-	clocks = <&pcie_clk>;
-	enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
-	/delete-property/ clock-frequency;
-};
-
-&pciec0 {
-	reset-gpios = <&io_expander_a 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>;
-	pinctrl-names = "default";
-
-	avb0_pins: avb0 {
-		mux {
-			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
-				 "avb0_txcrefclk";
-			function = "avb0";
-		};
-
-		pins_mdio {
-			groups = "avb0_mdio";
-			drive-strength = <21>;
-		};
-
-		pins_mii {
-			groups = "avb0_rgmii";
-			drive-strength = <21>;
-		};
-	};
-
-	can_clk_pins: can-clk {
-		groups = "can_clk";
-		function = "can_clk";
-	};
-
-	canfd0_pins: canfd0 {
-		groups = "canfd0_data";
-		function = "canfd0";
-	};
-
-	canfd1_pins: canfd1 {
-		groups = "canfd1_data";
-		function = "canfd1";
-	};
-
-	hscif0_pins: hscif0 {
-		groups = "hscif0_data", "hscif0_ctrl";
-		function = "hscif0";
-	};
-
-	hscif2_pins: hscif2 {
-		groups = "hscif2_data", "hscif2_ctrl";
-		function = "hscif2";
-	};
-
-	i2c0_pins: i2c0 {
-		groups = "i2c0";
-		function = "i2c0";
-	};
-
-	i2c3_pins: i2c3 {
-		groups = "i2c3";
-		function = "i2c3";
-	};
-
-	keys_pins: keys {
-		pins = "GP_5_0", "GP_5_1", "GP_5_2";
-		bias-pull-up;
-	};
-
-	mmc_pins: mmc {
-		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
-		function = "mmc";
-		power-source = <1800>;
-	};
-
-	qspi0_pins: qspi0 {
-		groups = "qspi0_ctrl", "qspi0_data4";
-		function = "qspi0";
-	};
-
-	scif_clk_pins: scif-clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-
-	scif_clk2_pins: scif-clk2 {
-		groups = "scif_clk2";
-		function = "scif_clk2";
-	};
-
-	sound_clk_pins: sound_clk {
-		groups = "audio_clkin", "audio_clkout";
-		function = "audio_clk";
-	};
-
-	sound_pins: sound {
-		groups = "ssi_ctrl", "ssi_data";
-		function = "ssi";
-	};
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_clk_pins>, <&sound_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* audio_clkout */
-	clock-frequency = <12288000>;
-
-	ports {
-		rsnd_port: port {
-			rsnd_endpoint: endpoint {
-				remote-endpoint = <&ak4619_endpoint>;
-				bitclock-master;
-				frame-master;
-
-				/* see above [How to use Sound] */
-				playback = <&ssi0>;
-				capture  = <&ssi0>;
-			};
-		};
-	};
-};
-
-&rpc {
-	pinctrl-0 = <&qspi0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fs512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-		spi-rx-bus-width = <4>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			boot@0 {
-				reg = <0x0 0x1200000>;
-				read-only;
-			};
-			user@1200000 {
-				reg = <0x1200000 0x2e00000>;
-			};
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <24000000>;
-};
-
-&scif_clk2 {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
index facfff4b9cdc..4dc0e5304f72 100644
--- a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
@@ -13,6 +13,7 @@
 	compatible = "renesas,r8a779h0";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/* External Audio clock - to be overridden by boards that provide it */
 	audio_clkin: audio_clkin {
@@ -138,6 +139,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	extalr_clk: extalr-clk {
@@ -145,6 +147,7 @@
 		#clock-cells = <0>;
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
+		bootph-all;
 	};
 
 	pcie0_clkref: pcie0-clkref {
@@ -156,7 +159,7 @@
 
 	pmu-a76 {
 		compatible = "arm,cortex-a76-pmu";
-		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -179,7 +182,8 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
+		bootph-all;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -195,12 +199,23 @@
 			status = "disabled";
 		};
 
+		swdt: watchdog@e6030000 {
+			compatible = "renesas,r8a779h0-wdt", "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6030000 0 0x0c>;
+			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A779H0_CLK_OSC>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 1128>;
+			status = "disabled";
+		};
+
 		pfc: pinctrl@e6050000 {
 			compatible = "renesas,pfc-r8a779h0";
 			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
 			      <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>,
 			      <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>,
 			      <0 0xe6061000 0 0x16c>, <0 0xe6061800 0 0x16c>;
+			bootph-all;
 		};
 
 		gpio0: gpio@e6050180 {
@@ -401,11 +416,13 @@
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
 			#reset-cells = <1>;
+			bootph-all;
 		};
 
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a779h0-rst";
 			reg = <0 0xe6160000 0 0x4000>;
+			bootph-all;
 		};
 
 		sysc: system-controller@e6180000 {
@@ -793,8 +810,6 @@
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_hc 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -842,8 +857,6 @@
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_hc 1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -891,8 +904,6 @@
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_hc 2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -1900,16 +1911,87 @@
 			};
 		};
 
+		fcpvd0: fcp@fea10000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea10000 0 0x200>;
+			clocks = <&cpg CPG_MOD 508>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 508>;
+		};
+
+		fcpvx0: fcp@fedb0000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfedb0000 0 0x200>;
+			clocks = <&cpg CPG_MOD 1100>;
+			power-domains = <&sysc R8A779H0_PD_A3ISP0>;
+			resets = <&cpg 1100>;
+			iommus = <&ipmmu_vi1 24>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x8000>;
+			interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 830>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 830>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspx0: vsp@fedd0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfedd0000 0 0x8000>;
+			interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1028>;
+			power-domains = <&sysc R8A779H0_PD_A3ISP0>;
+			resets = <&cpg 1028>;
+
+			renesas,fcp = <&fcpvx0>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a779h0";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 411>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 411>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_dsi0: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+			};
+		};
+
 		isp0: isp@fed00000 {
 			compatible = "renesas,r8a779h0-isp",
 				     "renesas,rcar-gen4-isp";
-			reg = <0 0xfed00000 0 0x10000>;
-			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&cpg CPG_MOD 612>;
+			reg = <0 0xfed00000 0 0x10000>, <0 0xfec00000 0 0x100000>;
+			reg-names = "cs", "core";
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs", "core";
+			clocks = <&cpg CPG_MOD 612>, <&cpg CPG_MOD 16>;
+			clock-names = "cs", "core";
 			power-domains = <&sysc R8A779H0_PD_A3ISP0>;
-			resets = <&cpg 612>;
+			resets = <&cpg 612>, <&cpg 16>;
+			reset-names = "cs", "core";
 			status = "disabled";
 
+			renesas,vspx = <&vspx0>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1988,10 +2070,14 @@
 			compatible = "renesas,r8a779h0-isp",
 				     "renesas,rcar-gen4-isp";
 			reg = <0 0xfed20000 0 0x10000>;
-			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>;
+			reg-names = "cs";
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cs";
 			clocks = <&cpg CPG_MOD 613>;
+			clock-names = "cs";
 			power-domains = <&sysc R8A779H0_PD_A3ISP0>;
 			resets = <&cpg 613>;
+			reset-names = "cs";
 			status = "disabled";
 
 			ports {
@@ -2068,9 +2154,39 @@
 			};
 		};
 
+		dsi0: dsi@fed80000 {
+			compatible = "renesas,r8a779h0-dsi-csi2-tx";
+			reg = <0 0xfed80000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 415>,
+				 <&cpg CPG_CORE R8A779H0_CLK_DSIEXT>,
+				 <&cpg CPG_CORE R8A779H0_CLK_DSIREF>;
+			clock-names = "fck", "dsi", "pll";
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 415>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+						remote-endpoint = <&du_out_dsi0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
+			bootph-all;
 		};
 	};
 
@@ -2106,11 +2222,11 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
 				  "hyp-virt";
 	};
diff --git a/arch/arm64/boot/dts/renesas/r8a779h2-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h2-gray-hawk-single.dts
new file mode 100644
index 000000000000..aeb32c77099e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779h2-gray-hawk-single.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4M-7 Gray Hawk Single board
+ *
+ * Copyright (C) 2025 Glider bv
+ */
+
+/dts-v1/;
+
+#include "r8a779h2.dtsi"
+#include "gray-hawk-single.dtsi"
+
+/ {
+	model = "Renesas Gray Hawk Single board based on r8a779h2";
+	compatible = "renesas,gray-hawk-single", "renesas,r8a779h2",
+		     "renesas,r8a779h0";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779h2.dtsi b/arch/arm64/boot/dts/renesas/r8a779h2.dtsi
new file mode 100644
index 000000000000..2707d2d36766
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779h2.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4M-7 (R8A779H2) SoC
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+#include "r8a779h0.dtsi"
+
+/ {
+	compatible = "renesas,r8a779h2", "renesas,r8a779h0";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts b/arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts
new file mode 100644
index 000000000000..a721734fbd5d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the Ironhide board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a78000.dtsi"
+
+/ {
+	model = "Renesas Ironhide board based on r8a78000";
+	compatible = "renesas,ironhide", "renesas,r8a78000";
+
+	aliases {
+		serial0 = &hscif0;
+	};
+
+	chosen {
+		stdout-path = "serial0:1843200n8";
+	};
+
+	memory@60600000 {
+		device_type = "memory";
+		/* first 518MiB is reserved for other purposes. */
+		reg = <0x0 0x60600000 0x0 0x5fa00000>;
+	};
+
+	memory@1080000000 {
+		device_type = "memory";
+		reg = <0x10 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@1200000000 {
+		device_type = "memory";
+		reg = <0x12 0x00000000 0x1 0x00000000>;
+	};
+
+	memory@1400000000 {
+		device_type = "memory";
+		reg = <0x14 0x00000000 0x1 0x00000000>;
+	};
+
+	memory@1600000000 {
+		device_type = "memory";
+		reg = <0x16 0x00000000 0x1 0x00000000>;
+	};
+
+	memory@1800000000 {
+		device_type = "memory";
+		reg = <0x18 0x00000000 0x1 0x00000000>;
+	};
+
+	memory@1a00000000 {
+		device_type = "memory";
+		reg = <0x1a 0x00000000 0x1 0x00000000>;
+	};
+
+	memory@1c00000000 {
+		device_type = "memory";
+		reg = <0x1c 0x00000000 0x1 0x00000000>;
+	};
+
+	memory@1e00000000 {
+		device_type = "memory";
+		reg = <0x1e 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666600>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hscif0 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <26000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a78000.dtsi b/arch/arm64/boot/dts/renesas/r8a78000.dtsi
new file mode 100644
index 000000000000..4c97298fa763
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a78000.dtsi
@@ -0,0 +1,787 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car X5H (R8A78000) SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r8a78000";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a720_0>;
+				};
+				core1 {
+					cpu = <&a720_1>;
+				};
+				core2 {
+					cpu = <&a720_2>;
+				};
+				core3 {
+					cpu = <&a720_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a720_4>;
+				};
+				core1 {
+					cpu = <&a720_5>;
+				};
+				core2 {
+					cpu = <&a720_6>;
+				};
+				core3 {
+					cpu = <&a720_7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&a720_8>;
+				};
+				core1 {
+					cpu = <&a720_9>;
+				};
+				core2 {
+					cpu = <&a720_10>;
+				};
+				core3 {
+					cpu = <&a720_11>;
+				};
+			};
+
+			cluster3 {
+				core0 {
+					cpu = <&a720_12>;
+				};
+				core1 {
+					cpu = <&a720_13>;
+				};
+				core2 {
+					cpu = <&a720_14>;
+				};
+				core3 {
+					cpu = <&a720_15>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&a720_16>;
+				};
+				core1 {
+					cpu = <&a720_17>;
+				};
+				core2 {
+					cpu = <&a720_18>;
+				};
+				core3 {
+					cpu = <&a720_19>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&a720_20>;
+				};
+				core1 {
+					cpu = <&a720_21>;
+				};
+				core2 {
+					cpu = <&a720_22>;
+				};
+				core3 {
+					cpu = <&a720_23>;
+				};
+			};
+
+			cluster6 {
+				core0 {
+					cpu = <&a720_24>;
+				};
+				core1 {
+					cpu = <&a720_25>;
+				};
+				core2 {
+					cpu = <&a720_26>;
+				};
+				core3 {
+					cpu = <&a720_27>;
+				};
+			};
+
+			cluster7 {
+				core0 {
+					cpu = <&a720_28>;
+				};
+				core1 {
+					cpu = <&a720_29>;
+				};
+				core2 {
+					cpu = <&a720_30>;
+				};
+				core3 {
+					cpu = <&a720_31>;
+				};
+			};
+		};
+
+		a720_0: cpu@0 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_0>;
+		};
+
+		a720_1: cpu@100 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_1>;
+		};
+
+		a720_2: cpu@200 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x200>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_2>;
+		};
+
+		a720_3: cpu@300 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x300>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_3>;
+		};
+
+		a720_4: cpu@10000 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x10000>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_4>;
+		};
+
+		a720_5: cpu@10100 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x10100>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_5>;
+		};
+
+		a720_6: cpu@10200 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x10200>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_6>;
+		};
+
+		a720_7: cpu@10300 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x10300>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_7>;
+		};
+
+		a720_8: cpu@20000 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x20000>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_8>;
+		};
+
+		a720_9: cpu@20100 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x20100>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_9>;
+		};
+
+		a720_10: cpu@20200 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x20200>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_10>;
+		};
+
+		a720_11: cpu@20300 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x20300>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_11>;
+		};
+
+		a720_12: cpu@30000 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x30000>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_12>;
+		};
+
+		a720_13: cpu@30100 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x30100>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_13>;
+		};
+
+		a720_14: cpu@30200 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x30200>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_14>;
+		};
+
+		a720_15: cpu@30300 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x30300>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_15>;
+		};
+
+		a720_16: cpu@40000 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x40000>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_16>;
+		};
+
+		a720_17: cpu@40100 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x40100>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_17>;
+		};
+
+		a720_18: cpu@40200 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x40200>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_18>;
+		};
+
+		a720_19: cpu@40300 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x40300>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_19>;
+		};
+
+		a720_20: cpu@50000 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x50000>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_20>;
+		};
+
+		a720_21: cpu@50100 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x50100>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_21>;
+		};
+
+		a720_22: cpu@50200 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x50200>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_22>;
+		};
+
+		a720_23: cpu@50300 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x50300>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_23>;
+		};
+
+		a720_24: cpu@60000 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x60000>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_24>;
+		};
+
+		a720_25: cpu@60100 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x60100>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_25>;
+		};
+
+		a720_26: cpu@60200 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x60200>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_26>;
+		};
+
+		a720_27: cpu@60300 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x60300>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_27>;
+		};
+
+		a720_28: cpu@70000 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x70000>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_28>;
+		};
+
+		a720_29: cpu@70100 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x70100>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_29>;
+		};
+
+		a720_30: cpu@70200 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x70200>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_30>;
+		};
+
+		a720_31: cpu@70300 {
+			compatible = "arm,cortex-a720ae";
+			reg = <0x0 0x70300>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA720_31>;
+		};
+
+		L2_CA720_0: cache-controller-200 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_0>;
+		};
+
+		L2_CA720_1: cache-controller-201 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_0>;
+		};
+
+		L2_CA720_2: cache-controller-202 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_0>;
+		};
+
+		L2_CA720_3: cache-controller-203 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_0>;
+		};
+
+		L2_CA720_4: cache-controller-204 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_1>;
+		};
+
+		L2_CA720_5: cache-controller-205 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_1>;
+		};
+
+		L2_CA720_6: cache-controller-206 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_1>;
+		};
+
+		L2_CA720_7: cache-controller-207 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_1>;
+		};
+
+		L2_CA720_8: cache-controller-208 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_2>;
+		};
+
+		L2_CA720_9: cache-controller-209 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_2>;
+		};
+
+		L2_CA720_10: cache-controller-210 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_2>;
+		};
+
+		L2_CA720_11: cache-controller-211 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_2>;
+		};
+
+		L2_CA720_12: cache-controller-212 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_3>;
+		};
+
+		L2_CA720_13: cache-controller-213 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_3>;
+		};
+
+		L2_CA720_14: cache-controller-214 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_3>;
+		};
+
+		L2_CA720_15: cache-controller-215 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_3>;
+		};
+
+		L2_CA720_16: cache-controller-216 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_4>;
+		};
+
+		L2_CA720_17: cache-controller-217 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_4>;
+		};
+
+		L2_CA720_18: cache-controller-218 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_4>;
+		};
+
+		L2_CA720_19: cache-controller-219 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_4>;
+		};
+
+		L2_CA720_20: cache-controller-220 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_5>;
+		};
+
+		L2_CA720_21: cache-controller-221 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_5>;
+		};
+
+		L2_CA720_22: cache-controller-222 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_5>;
+		};
+
+		L2_CA720_23: cache-controller-223 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_5>;
+		};
+
+		L2_CA720_24: cache-controller-224 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_6>;
+		};
+
+		L2_CA720_25: cache-controller-225 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_6>;
+		};
+
+		L2_CA720_26: cache-controller-226 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_6>;
+		};
+
+		L2_CA720_27: cache-controller-227 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_6>;
+		};
+
+		L2_CA720_28: cache-controller-228 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_7>;
+		};
+
+		L2_CA720_29: cache-controller-229 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_7>;
+		};
+
+		L2_CA720_30: cache-controller-230 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_7>;
+		};
+
+		L2_CA720_31: cache-controller-231 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&L3_CA720_7>;
+		};
+
+		L3_CA720_0: cache-controller-30 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA720_1: cache-controller-31 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA720_2: cache-controller-32 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA720_3: cache-controller-33 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA720_4: cache-controller-34 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA720_5: cache-controller-35 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA720_6: cache-controller-36 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA720_7: cache-controller-37 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <3>;
+		};
+	};
+
+	/*
+	 * In the early phase, there is no clock control support,
+	 * so assume that the clocks are enabled by default.
+	 * Therefore, dummy clocks are used.
+	 */
+	dummy_clk_sgasyncd16: dummy-clk-sgasyncd16 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <66666000>;
+	};
+
+	dummy_clk_sgasyncd4: dummy-clk-sgasyncd4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <266660000>;
+	};
+
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* clock-frequency must be set on board */
+	};
+
+	extalr_clk: extalr-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* clock-frequency must be set on board */
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>; /* optional */
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		prr: chipid@189e0044 {
+			compatible = "renesas,prr";
+			reg = <0 0x189e0044 0 4>;
+		};
+
+		/* Application Processors manage View-1 of a GIC-720AE */
+		gic: interrupt-controller@39000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0x39000000 0 0x10000>,
+			      <0 0x39080000 0 0x800000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		scif0: serial@c0700000 {
+			compatible = "renesas,scif-r8a78000",
+				     "renesas,rcar-gen5-scif", "renesas,scif";
+			reg = <0 0xc0700000 0 0x40>;
+			interrupts = <GIC_SPI 4074 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			status = "disabled";
+		};
+
+		scif1: serial@c0704000 {
+			compatible = "renesas,scif-r8a78000",
+				     "renesas,rcar-gen5-scif", "renesas,scif";
+			reg = <0 0xc0704000 0 0x40>;
+			interrupts = <GIC_SPI 4075 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			status = "disabled";
+		};
+
+		scif3: serial@c0708000 {
+			compatible = "renesas,scif-r8a78000",
+				     "renesas,rcar-gen5-scif", "renesas,scif";
+			reg = <0 0xc0708000 0 0x40>;
+			interrupts = <GIC_SPI 4076 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			status = "disabled";
+		};
+
+		scif4: serial@c070c000 {
+			compatible = "renesas,scif-r8a78000",
+				     "renesas,rcar-gen5-scif", "renesas,scif";
+			reg = <0 0xc070c000 0 0x40>;
+			interrupts = <GIC_SPI 4077 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			status = "disabled";
+		};
+
+		hscif0: serial@c0710000 {
+			compatible = "renesas,hscif-r8a78000",
+				     "renesas,rcar-gen5-hscif", "renesas,hscif";
+			reg = <0 0xc0710000 0 0x60>;
+			interrupts = <GIC_SPI 4078 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dummy_clk_sgasyncd4>, <&dummy_clk_sgasyncd4>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			status = "disabled";
+		};
+
+		hscif1: serial@c0714000 {
+			compatible = "renesas,hscif-r8a78000",
+				     "renesas,rcar-gen5-hscif", "renesas,hscif";
+			reg = <0 0xc0714000 0 0x60>;
+			interrupts = <GIC_SPI 4079 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dummy_clk_sgasyncd4>, <&dummy_clk_sgasyncd4>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			status = "disabled";
+		};
+
+		hscif2: serial@c0718000 {
+			compatible = "renesas,hscif-r8a78000",
+				     "renesas,rcar-gen5-hscif", "renesas,hscif";
+			reg = <0 0xc0718000 0 0x60>;
+			interrupts = <GIC_SPI 4080 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dummy_clk_sgasyncd4>, <&dummy_clk_sgasyncd4>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			status = "disabled";
+		};
+
+		hscif3: serial@c071c000 {
+			compatible = "renesas,hscif-r8a78000",
+				     "renesas,rcar-gen5-hscif", "renesas,hscif";
+			reg = <0 0xc071c000 0 0x60>;
+			interrupts = <GIC_SPI 4081 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dummy_clk_sgasyncd4>, <&dummy_clk_sgasyncd4>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
index a3998e5928f7..5f5d1b0c31c6 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -12,6 +12,8 @@
 #include "r9a07g043.dtsi"
 
 / {
+	interrupt-parent = <&gic>;
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -37,7 +39,7 @@
 
 	pmu {
 		compatible = "arm,cortex-a55-pmu";
-		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -47,19 +49,17 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
 				  "hyp-virt";
 	};
 };
 
 &soc {
-	interrupt-parent = <&gic>;
-
 	cru: video@10830000 {
 		compatible = "renesas,r9a07g043-cru", "renesas,rzg2l-cru";
 		reg = <0 0x10830000 0 0x400>;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 6b1c77cd8261..bd52d60bafb9 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -12,6 +12,7 @@
 	compatible = "renesas,r9a07g044";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	audio_clk1: audio1-clk {
 		compatible = "fixed-clock";
@@ -159,7 +160,7 @@
 
 	pmu {
 		compatible = "arm,cortex-a55-pmu";
-		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -169,7 +170,6 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -244,6 +244,121 @@
 			status = "disabled";
 		};
 
+		gpt: pwm@10048000 {
+			compatible = "renesas,r9a07g044-gpt",
+				     "renesas,rzg2l-gpt";
+			reg = <0 0x10048000 0 0x800>;
+			#pwm-cells = <3>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 221 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 222 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 223 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 224 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 225 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 226 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 227 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 231 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 237 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 239 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 259 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 260 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 270 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 272 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 273 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 274 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 275 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 276 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 284 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 285 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 301 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 302 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 303 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 304 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 305 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 312 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 313 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 316 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 317 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ccmpa0", "ccmpb0", "cmpc0", "cmpd0",
+					  "cmpe0", "cmpf0", "adtrga0", "adtrgb0",
+					  "ovf0", "unf0",
+					  "ccmpa1", "ccmpb1", "cmpc1", "cmpd1",
+					  "cmpe1", "cmpf1", "adtrga1", "adtrgb1",
+					  "ovf1", "unf1",
+					  "ccmpa2", "ccmpb2", "cmpc2", "cmpd2",
+					  "cmpe2", "cmpf2", "adtrga2", "adtrgb2",
+					  "ovf2", "unf2",
+					  "ccmpa3", "ccmpb3", "cmpc3", "cmpd3",
+					  "cmpe3", "cmpf3", "adtrga3", "adtrgb3",
+					  "ovf3", "unf3",
+					  "ccmpa4", "ccmpb4", "cmpc4", "cmpd4",
+					  "cmpe4", "cmpf4", "adtrga4", "adtrgb4",
+					  "ovf4", "unf4",
+					  "ccmpa5", "ccmpb5", "cmpc5", "cmpd5",
+					  "cmpe5", "cmpf5", "adtrga5", "adtrgb5",
+					  "ovf5", "unf5",
+					  "ccmpa6", "ccmpb6", "cmpc6", "cmpd6",
+					  "cmpe6", "cmpf6", "adtrga6", "adtrgb6",
+					  "ovf6", "unf6",
+					  "ccmpa7", "ccmpb7", "cmpc7", "cmpd7",
+					  "cmpe7", "cmpf7", "adtrga7", "adtrgb7",
+					  "ovf7", "unf7";
+			clocks = <&cpg CPG_MOD R9A07G044_GPT_PCLK>;
+			resets = <&cpg R9A07G044_GPT_RST_C>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
 		ssi0: ssi@10049c00 {
 			compatible = "renesas,r9a07g044-ssi",
 				     "renesas,rz-ssi";
@@ -1335,11 +1450,11 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
 				  "hyp-virt";
 	};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-remi-pi.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-remi-pi.dts
new file mode 100644
index 000000000000..3267e7b75b58
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-remi-pi.dts
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the MYIR Remi Pi
+ *
+ * Copyright (C) 2022 MYIR Electronics Corp.
+ * Copyright (C) 2025 Collabora Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#include "r9a07g044l2.dtsi"
+
+/ {
+	model = "MYIR Tech Limited Remi Pi MYB-YG2LX-REMI";
+	compatible = "myir,remi-pi", "renesas,r9a07g044l2", "renesas,r9a07g044";
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+
+		mmc0 = &sdhi0;
+
+		serial0 = &scif0;
+		serial4 = &scif4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt8912_out>;
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		vin-supply = <&reg_5p0v>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		vin-supply = <&reg_5p0v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5.0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_1p1v: regulator-vdd-core {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.1V";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+	};
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi_out: endpoint {
+				remote-endpoint = <&lt8912_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <4>;
+		interrupts-extended = <&pinctrl RZG2L_GPIO(44, 2) IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&pinctrl RZG2L_GPIO(44, 3) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy1: ethernet-phy@6 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <6>;
+		interrupts-extended = <&pinctrl RZG2L_GPIO(43, 2) IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&pinctrl RZG2L_GPIO(43, 3) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&gpu {
+	mali-supply = <&reg_1p1v>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hdmi-bridge@48 {
+		compatible = "lontium,lt8912b";
+		reg = <0x48> ;
+		reset-gpios = <&pinctrl RZG2L_GPIO(42, 2) GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt8912_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt8912_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&mtu3 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&phyrst {
+	status = "okay";
+};
+
+&pinctrl {
+	eth0_pins: eth0 {
+		pinmux = <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+			 <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+			 <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
+			 <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+			 <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+			 <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+			 <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+			 <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+			 <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+			 <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+			 <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+			 <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+			 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+			 <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */
+	};
+
+	eth1_pins: eth1 {
+		pinmux = <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
+			 <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
+			 <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */
+			 <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
+			 <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
+			 <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
+			 <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
+			 <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
+			 <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
+			 <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
+			 <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
+			 <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
+			 <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
+			 <RZG2L_PORT_PINMUX(36, 0, 1)>; /* ET1_RXD3 */
+	};
+
+	i2c0_pins: i2c0 {
+		pins = "RIIC0_SDA", "RIIC0_SCL";
+		input-enable;
+	};
+
+	i2c1_pins: i2c1 {
+		pins = "RIIC1_SDA", "RIIC1_SCL";
+		input-enable;
+	};
+
+	i2c2_pins: i2c2 {
+		pinmux = <RZG2L_PORT_PINMUX(3, 0, 2)>, /* SDA */
+			 <RZG2L_PORT_PINMUX(3, 1, 2)>; /* SCL */
+	};
+
+	i2c3_pins: i2c3 {
+		pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
+			 <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
+	};
+
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */
+	};
+
+	scif4_pins: scif4 {
+		pinmux = <RZG2L_PORT_PINMUX(2, 0, 5)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(2, 1, 5)>; /* RxD */
+	};
+
+	sdhi0_pins: sd0 {
+		sd0-ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0-data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+			       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+			power-source = <1800>;
+		};
+
+		sd0-rst {
+			pins = "SD0_RST#";
+			power-source = <1800>;
+		};
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif4 {
+	pinctrl-0 = <&scif4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
index 568d49cfe44a..b36749f94ccb 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -27,6 +27,13 @@
 #error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0"
 #endif
 
+/*
+ * To enable the GPT pins GTIOC4A(PMOD0_PIN7) and GTIOC4B(PMOD0_PIN10) on the
+ * PMOD0 connector (J1), enable PMOD0_GPT by setting "#define PMOD0_GPT	1"
+ * below.
+ */
+#define PMOD0_GPT	0
+
 #include "r9a07g044l2.dtsi"
 #include "rzg2l-smarc-som.dtsi"
 #include "rzg2l-smarc-pinfunction.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index 01f59914dd09..4e0256d3201d 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -12,6 +12,7 @@
 	compatible = "renesas,r9a07g054";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	audio_clk1: audio1-clk {
 		compatible = "fixed-clock";
@@ -159,7 +160,7 @@
 
 	pmu {
 		compatible = "arm,cortex-a55-pmu";
-		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -169,7 +170,6 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -244,6 +244,121 @@
 			status = "disabled";
 		};
 
+		gpt: pwm@10048000 {
+			compatible = "renesas,r9a07g054-gpt",
+				     "renesas,rzg2l-gpt";
+			reg = <0 0x10048000 0 0x800>;
+			#pwm-cells = <3>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 221 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 222 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 223 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 224 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 225 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 226 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 227 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 231 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 237 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 239 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 259 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 260 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 270 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 272 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 273 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 274 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 275 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 276 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 284 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 285 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 301 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 302 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 303 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 304 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 305 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 312 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 313 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 316 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 317 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ccmpa0", "ccmpb0", "cmpc0", "cmpd0",
+					  "cmpe0", "cmpf0", "adtrga0", "adtrgb0",
+					  "ovf0", "unf0",
+					  "ccmpa1", "ccmpb1", "cmpc1", "cmpd1",
+					  "cmpe1", "cmpf1", "adtrga1", "adtrgb1",
+					  "ovf1", "unf1",
+					  "ccmpa2", "ccmpb2", "cmpc2", "cmpd2",
+					  "cmpe2", "cmpf2", "adtrga2", "adtrgb2",
+					  "ovf2", "unf2",
+					  "ccmpa3", "ccmpb3", "cmpc3", "cmpd3",
+					  "cmpe3", "cmpf3", "adtrga3", "adtrgb3",
+					  "ovf3", "unf3",
+					  "ccmpa4", "ccmpb4", "cmpc4", "cmpd4",
+					  "cmpe4", "cmpf4", "adtrga4", "adtrgb4",
+					  "ovf4", "unf4",
+					  "ccmpa5", "ccmpb5", "cmpc5", "cmpd5",
+					  "cmpe5", "cmpf5", "adtrga5", "adtrgb5",
+					  "ovf5", "unf5",
+					  "ccmpa6", "ccmpb6", "cmpc6", "cmpd6",
+					  "cmpe6", "cmpf6", "adtrga6", "adtrgb6",
+					  "ovf6", "unf6",
+					  "ccmpa7", "ccmpb7", "cmpc7", "cmpd7",
+					  "cmpe7", "cmpf7", "adtrga7", "adtrgb7",
+					  "ovf7", "unf7";
+			clocks = <&cpg CPG_MOD R9A07G054_GPT_PCLK>;
+			resets = <&cpg R9A07G054_GPT_RST_C>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
 		ssi0: ssi@10049c00 {
 			compatible = "renesas,r9a07g054-ssi",
 				     "renesas,rz-ssi";
@@ -1343,11 +1458,11 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
 				  "hyp-virt";
 	};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
index b3e6016880dd..43c456ffa63c 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -26,6 +26,13 @@
 #error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0"
 #endif
 
+/*
+ * To enable the GPT pins GTIOC4A(PMOD0_PIN7) and GTIOC4B(PMOD0_PIN10) on the
+ * PMOD0 connector (J1), enable PMOD0_GPT by setting "#define PMOD0_GPT	1"
+ * below.
+ */
+#define PMOD0_GPT	0
+
 #include "r9a07g054l2.dtsi"
 #include "rzg2l-smarc-som.dtsi"
 #include "rzg2l-smarc-pinfunction.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
index be8a0a768c65..876de634908e 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
@@ -13,6 +13,48 @@
 	compatible = "renesas,r9a08g045";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	audio_clk1: audio1-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it. */
+		clock-frequency = <0>;
+	};
+
+	audio_clk2: audio2-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it. */
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-137500000 {
+			opp-hz = /bits/ 64 <137500000>;
+			opp-microvolt = <940000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			opp-microvolt = <940000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			opp-microvolt = <940000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <940000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
 
 	cpus {
 		#address-cells = <1>;
@@ -26,6 +68,7 @@
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A08G045_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		L3_CA55: cache-controller-0 {
@@ -50,7 +93,6 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -73,6 +115,96 @@
 			status = "disabled";
 		};
 
+		scif1: serial@1004bc00 {
+			compatible = "renesas,scif-r9a08g045", "renesas,scif-r9a07g044";
+			reg = <0 0x1004bc00 0 0x400>;
+			interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A08G045_SCIF1_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_SCIF1_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif2: serial@1004c000 {
+			compatible = "renesas,scif-r9a08g045", "renesas,scif-r9a07g044";
+			reg = <0 0x1004c000 0 0x400>;
+			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A08G045_SCIF2_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_SCIF2_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif3: serial@1004c400 {
+			compatible = "renesas,scif-r9a08g045", "renesas,scif-r9a07g044";
+			reg = <0 0x1004c400 0 0x400>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A08G045_SCIF3_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_SCIF3_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif4: serial@1004c800 {
+			compatible = "renesas,scif-r9a08g045", "renesas,scif-r9a07g044";
+			reg = <0 0x1004c800 0 0x400>;
+			interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A08G045_SCIF4_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_SCIF4_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif5: serial@1004e000 {
+			compatible = "renesas,scif-r9a08g045", "renesas,scif-r9a07g044";
+			reg = <0 0x1004e000 0 0x400>;
+			interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A08G045_SCIF5_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_SCIF5_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
 		rtc: rtc@1004ec00 {
 			compatible = "renesas,r9a08g045-rtca3", "renesas,rz-rtca3";
 			reg = <0 0x1004ec00 0 0x400>;
@@ -87,6 +219,105 @@
 			status = "disabled";
 		};
 
+		adc: adc@10058000 {
+			compatible = "renesas,r9a08g045-adc";
+			reg = <0 0x10058000 0 0x1000>;
+			interrupts = <GIC_SPI 312 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A08G045_ADC_ADCLK>,
+				 <&cpg CPG_MOD R9A08G045_ADC_PCLK>;
+			clock-names = "adclk", "pclk";
+			resets = <&cpg R9A08G045_ADC_PRESETN>,
+				 <&cpg R9A08G045_ADC_ADRST_N>;
+			reset-names = "presetn", "adrst-n";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <0>;
+			};
+
+			channel@1 {
+				reg = <1>;
+			};
+
+			channel@2 {
+				reg = <2>;
+			};
+
+			channel@3 {
+				reg = <3>;
+			};
+
+			channel@4 {
+				reg = <4>;
+			};
+
+			channel@5 {
+				reg = <5>;
+			};
+
+			channel@6 {
+				reg = <6>;
+			};
+
+			channel@7 {
+				reg = <7>;
+			};
+
+			channel@8 {
+				reg = <8>;
+			};
+		};
+
+		tsu: thermal@10059000 {
+			compatible = "renesas,r9a08g045-tsu";
+			reg = <0 0x10059000 0 0x1000>;
+			clocks = <&cpg CPG_MOD R9A08G045_TSU_PCLK>;
+			resets = <&cpg R9A08G045_TSU_PRESETN>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <0>;
+			io-channels = <&adc 8>;
+			io-channel-names = "tsu";
+		};
+
+		i3c: i3c@1005b000 {
+			compatible = "renesas,r9a08g045-i3c";
+			reg = <0 0x1005b000 0 0x1000>;
+			clocks = <&cpg CPG_MOD R9A08G045_I3C_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_I3C_TCLK>;
+			clock-names = "pclk", "tclk";
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ierr", "terr", "abort", "resp",
+					  "cmd", "ibi", "rx", "tx", "rcv",
+					  "st", "sp", "tend", "nack", "al",
+					  "tmo", "wu", "exit";
+			resets = <&cpg R9A08G045_I3C_PRESETN>,
+				 <&cpg R9A08G045_I3C_TRESETN>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		vbattb: clock-controller@1005c000 {
 			compatible = "renesas,r9a08g045-vbattb";
 			reg = <0 0x1005c000 0 0x1000>;
@@ -187,6 +418,86 @@
 			status = "disabled";
 		};
 
+		ssi0: ssi@100a8000 {
+			compatible = "renesas,r9a08g045-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x100a8000 0 0x400>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A08G045_SSI0_PCLK2>,
+				 <&cpg CPG_MOD R9A08G045_SSI0_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A08G045_SSI0_RST_M2_REG>;
+			dmas = <&dmac 0x2665>, <&dmac 0x2666>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi1: ssi@100a8400 {
+			compatible = "renesas,r9a08g045-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x100a8400 0 0x400>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A08G045_SSI1_PCLK2>,
+				 <&cpg CPG_MOD R9A08G045_SSI1_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A08G045_SSI1_RST_M2_REG>;
+			dmas = <&dmac 0x2669>, <&dmac 0x266a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi2: ssi@100a8800 {
+			compatible = "renesas,r9a08g045-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x100a8800 0 0x400>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A08G045_SSI2_PCLK2>,
+				 <&cpg CPG_MOD R9A08G045_SSI2_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A08G045_SSI2_RST_M2_REG>;
+			dmas = <&dmac 0x266d>, <&dmac 0x266e>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi3: ssi@100a8c00 {
+			compatible = "renesas,r9a08g045-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x100a8c00 0 0x400>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A08G045_SSI3_PCLK2>,
+				 <&cpg CPG_MOD R9A08G045_SSI3_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A08G045_SSI3_RST_M2_REG>;
+			dmas = <&dmac 0x2671>, <&dmac 0x2672>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@11010000 {
 			compatible = "renesas,r9a08g045-cpg";
 			reg = <0 0x11010000 0 0x10000>;
@@ -206,7 +517,6 @@
 				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "lpm_int", "ca55stbydone_int",
 					  "cm33stbyr_int", "ca55_deny";
-			status = "disabled";
 		};
 
 		pinctrl: pinctrl@11030000 {
@@ -417,6 +727,124 @@
 			status = "disabled";
 		};
 
+		phyrst: usbphy-ctrl@11e00000 {
+			compatible = "renesas,r9a08g045-usbphy-ctrl";
+			reg = <0 0x11e00000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>;
+			resets = <&cpg R9A08G045_USB_PRESETN>;
+			power-domains = <&cpg>;
+			#reset-cells = <1>;
+			renesas,sysc-pwrrdy = <&sysc 0xd70 0x1>;
+			status = "disabled";
+
+			usb0_vbus_otg: regulator-vbus {
+				regulator-name = "vbus";
+			};
+		};
+
+		ohci0: usb@11e10000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11e10000 0 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A08G045_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@11e30000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11e30000 0 0x100>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A08G045_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@11e10100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11e10100 0 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A08G045_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@11e30100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11e30100 0 0x100>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A08G045_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@11e10200 {
+			compatible = "renesas,usb2-phy-r9a08g045";
+			reg = <0 0x11e10200 0 0x700>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A08G045_USB_U2H0_HRESETN>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@11e30200 {
+			compatible = "renesas,usb2-phy-r9a08g045";
+			reg = <0 0x11e30200 0 0x700>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A08G045_USB_U2H1_HRESETN>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@11e20000 {
+			compatible = "renesas,usbhs-r9a08g045",
+				     "renesas,rzg2l-usbhs";
+			reg = <0 0x11e20000 0 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2P_EXR_CPUCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A08G045_USB_U2P_EXL_SYSRST>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@12400000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
@@ -444,15 +872,52 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
 				  "hyp-virt";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsu>;
+			sustainable-power = <423>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				cpu_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_alert1: trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
 	vbattb_xtal: vbattb-xtal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r9a08g045s33-smarc-pmod1-type-3a.dtso b/arch/arm64/boot/dts/renesas/r9a08g045s33-smarc-pmod1-type-3a.dtso
new file mode 100644
index 000000000000..4a81e3a3c8bd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a08g045s33-smarc-pmod1-type-3a.dtso
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3S SMARC Carrier II EVK PMOD parts
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ *
+ *
+ * [Connection]
+ *
+ * SMARC Carrier II EVK
+ * +--------------------------------------------+
+ * |PMOD1_3A (PMOD1 PIN HEADER)			|
+ * |	SCIF1_CTS# (pin1)  (pin7)  PMOD1_GPIO10	|
+ * |	SCIF1_TXD  (pin2)  (pin8)  PMOD1_GPIO11	|
+ * |	SCIF1_RXD  (pin3)  (pin9)  PMOD1_GPIO12	|
+ * |	SCIF1_RTS# (pin4)  (pin10) PMOD1_GPIO13	|
+ * |	GND	   (pin5)  (pin11) GND		|
+ * |	PWR_PMOD1  (pin6)  (pin12) GND		|
+ * +--------------------------------------------+
+ *
+ * The following switches should be set as follows for SCIF1:
+ * - SW_CONFIG2:  ON
+ * - SW_OPT_MUX4: ON
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+#include "rzg3s-smarc-switches.h"
+
+&pinctrl {
+	scif1_pins: scif1-pins {
+		pinmux = <RZG2L_PORT_PINMUX(14, 0, 1)>, /* TXD */
+			 <RZG2L_PORT_PINMUX(14, 1, 1)>, /* RXD */
+			 <RZG2L_PORT_PINMUX(16, 0, 1)>, /* CTS# */
+			 <RZG2L_PORT_PINMUX(16, 1, 1)>; /* RTS# */
+	};
+};
+
+#if SW_CONFIG3 == SW_ON && SW_OPT_MUX4 == SW_ON
+&scif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif1_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+#endif
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
index 9a4cbef704c1..42462c138dd2 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -12,6 +12,7 @@
 	compatible = "renesas,r9a09g011";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
 	extal_clk: extal {
@@ -50,7 +51,6 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -368,10 +368,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
new file mode 100644
index 000000000000..7a469de3bb62
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
@@ -0,0 +1,1233 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3E SoC
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g047-cpg.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r9a09g047";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	audio_extal_clk: audio-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/*
+	 * The default cluster table is based on the assumption that the PLLCA55 clock
+	 * frequency is set to 1.7GHz. The PLLCA55 clock frequency can be set to
+	 * 1.7/1.6/1.5/1.1 GHz based on the BOOTPLLCA_0/1 pins (and additionally can be
+	 * clocked to 1.8GHz as well). The table below should be overridden in the board
+	 * DTS based on the PLLCA55 clock frequency.
+	 */
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-212500000 {
+			opp-hz = /bits/ 64 <212500000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK0>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK1>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK2>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK3>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-level = <3>;
+		};
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-630000000 {
+			opp-hz = /bits/ 64 <630000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-315000000 {
+			opp-hz = /bits/ 64 <315000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-157500000 {
+			opp-hz = /bits/ 64 <157500000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-78750000 {
+			opp-hz = /bits/ 64 <78750000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-19687500 {
+			opp-hz = /bits/ 64 <19687500>;
+			opp-microvolt = <800000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	qextal_clk: qextal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	rtxin_clk: rtxin-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		icu: interrupt-controller@10400000 {
+			compatible = "renesas,r9a09g047-icu";
+			reg = <0 0x10400000 0 0x10000>;
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nmi",
+					  "port_irq0", "port_irq1", "port_irq2",
+					  "port_irq3", "port_irq4", "port_irq5",
+					  "port_irq6", "port_irq7", "port_irq8",
+					  "port_irq9", "port_irq10", "port_irq11",
+					  "port_irq12", "port_irq13", "port_irq14",
+					  "port_irq15",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "int-ca55-0", "int-ca55-1",
+					  "int-ca55-2", "int-ca55-3",
+					  "icu-error-ca55",
+					  "gpt-u0-gtciada", "gpt-u0-gtciadb",
+					  "gpt-u1-gtciada", "gpt-u1-gtciadb";
+			clocks = <&cpg CPG_MOD 0x5>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x36>;
+		};
+
+		pinctrl: pinctrl@10410000 {
+			compatible = "renesas,r9a09g047-pinctrl";
+			reg = <0 0x10410000 0 0x10000>;
+			clocks = <&cpg CPG_CORE R9A09G047_IOTOP_0_SHCLK>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 232>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupt-parent = <&icu>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0xa5>, <&cpg 0xa6>;
+		};
+
+		cpg: clock-controller@10420000 {
+			compatible = "renesas,r9a09g047-cpg";
+			reg = <0 0x10420000 0 0x10000>;
+			clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>;
+			clock-names = "audio_extal", "rtxin", "qextal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sys: system-controller@10430000 {
+			compatible = "renesas,r9a09g047-sys";
+			reg = <0 0x10430000 0 0x10000>;
+			clocks = <&cpg CPG_CORE R9A09G047_SYS_0_PCLK>;
+			resets = <&cpg 0x30>;
+		};
+
+		xspi: spi@11030000 {
+			compatible = "renesas,r9a09g047-xspi";
+			reg = <0 0x11030000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>;
+			reg-names = "regs", "dirmap";
+			interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "pulse", "err_pulse";
+			clocks = <&cpg CPG_MOD 0x9f>,
+				 <&cpg CPG_MOD 0xa0>,
+				 <&cpg CPG_CORE R9A09G047_SPI_CLK_SPI>,
+				 <&cpg CPG_MOD 0xa1>;
+			clock-names = "ahb", "axi", "spi", "spix2";
+			resets = <&cpg 0xa3>, <&cpg 0xa4>;
+			reset-names = "hresetn", "aresetn";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@11400000 {
+			compatible = "renesas,r9a09g047-dmac",
+				     "renesas,r9a09g057-dmac";
+			reg = <0 0x11400000 0 0x10000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 89  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 90  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 91  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 92  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 93  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 94  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 95  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 96  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 97  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 98  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 99  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 101 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 104 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x0>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x31>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 4>;
+		};
+
+		dmac1: dma-controller@14830000 {
+			compatible = "renesas,r9a09g047-dmac",
+				     "renesas,r9a09g057-dmac";
+			reg = <0 0x14830000 0 0x10000>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 25  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 26  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 27  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 28  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 29  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 30  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 31  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 33  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 40  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x1>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x32>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 0>;
+		};
+
+		dmac2: dma-controller@14840000 {
+			compatible = "renesas,r9a09g047-dmac",
+				     "renesas,r9a09g057-dmac";
+			reg = <0 0x14840000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 41  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 42  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 43  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 44  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 45  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 46  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 47  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 48  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 49  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 50  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 51  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 52  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 53  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 54  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 55  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 56  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x2>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x33>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 1>;
+		};
+
+		dmac3: dma-controller@12000000 {
+			compatible = "renesas,r9a09g047-dmac",
+				     "renesas,r9a09g057-dmac";
+			reg = <0 0x12000000 0 0x10000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 57  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 58  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 59  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 60  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 61  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 62  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 63  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 64  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 65  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 66  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 67  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 68  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 69  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 70  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 71  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 72  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x3>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x34>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 2>;
+		};
+
+		dmac4: dma-controller@12010000 {
+			compatible = "renesas,r9a09g047-dmac",
+				     "renesas,r9a09g057-dmac";
+			reg = <0 0x12010000 0 0x10000>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 73  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 74  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 75  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 76  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 77  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 79  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 81  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 82  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 83  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 84  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 85  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 87  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 88  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x4>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x35>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 3>;
+		};
+
+		scif0: serial@11c01400 {
+			compatible = "renesas,scif-r9a09g047", "renesas,scif-r9a09g057";
+			reg = <0 0x11c01400 0 0x400>;
+			interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 536 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 537 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eri", "rxi", "txi", "bri", "dri",
+					  "tei", "tei-dri", "rxi-edge", "txi-edge";
+			clocks = <&cpg CPG_MOD 0x8f>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg 0x95>;
+			status = "disabled";
+		};
+
+		i3c: i3c@12400000 {
+			compatible = "renesas,r9a09g047-i3c";
+			reg = <0 0x12400000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0x91>,
+				 <&cpg CPG_MOD 0x92>,
+				 <&cpg CPG_MOD 0x90>;
+			clock-names = "pclk", "tclk", "pclkrw";
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 678 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 679 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 680 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 681 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 682 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ierr", "terr", "abort", "resp",
+					  "cmd", "ibi", "rx", "tx", "rcv",
+					  "st", "sp", "tend", "nack", "al",
+					  "tmo", "wu";
+			resets = <&cpg 0x96>, <&cpg 0x97>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		canfd: can@12440000 {
+			compatible = "renesas,r9a09g047-canfd";
+			reg = <0 0x12440000 0 0x40000>;
+			interrupts = <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 698 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 705 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 701 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g_err", "g_recc",
+					  "ch0_err", "ch0_rec", "ch0_trx",
+					  "ch1_err", "ch1_rec", "ch1_trx",
+					  "ch2_err", "ch2_rec", "ch2_trx",
+					  "ch3_err", "ch3_rec", "ch3_trx",
+					  "ch4_err", "ch4_rec", "ch4_trx",
+					  "ch5_err", "ch5_rec", "ch5_trx";
+			clocks = <&cpg CPG_MOD 0x9c>, <&cpg CPG_MOD 0x9d>,
+				 <&cpg CPG_MOD 0x9e>;
+			clock-names = "fck", "ram_clk", "can_clk";
+			assigned-clocks = <&cpg CPG_MOD 0x9e>;
+			assigned-clock-rates = <80000000>;
+			resets = <&cpg 0xa1>, <&cpg 0xa2>;
+			reset-names = "rstp_n", "rstc_n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+			channel1 {
+				status = "disabled";
+			};
+			channel2 {
+				status = "disabled";
+			};
+			channel3 {
+				status = "disabled";
+			};
+			channel4 {
+				status = "disabled";
+			};
+			channel5 {
+				status = "disabled";
+			};
+		};
+
+		wdt1: watchdog@14400000 {
+			compatible = "renesas,r9a09g047-wdt", "renesas,r9a09g057-wdt";
+			reg = <0 0x14400000 0 0x400>;
+			clocks = <&cpg CPG_MOD 0x4d>, <&cpg CPG_MOD 0x4e>;
+			clock-names = "pclk", "oscclk";
+			resets = <&cpg 0x76>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt2: watchdog@13000000 {
+			compatible = "renesas,r9a09g047-wdt", "renesas,r9a09g057-wdt";
+			reg = <0 0x13000000 0 0x400>;
+			clocks = <&cpg CPG_MOD 0x4f>, <&cpg CPG_MOD 0x50>;
+			clock-names = "pclk", "oscclk";
+			resets = <&cpg 0x77>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt3: watchdog@13000400 {
+			compatible = "renesas,r9a09g047-wdt", "renesas,r9a09g057-wdt";
+			reg = <0 0x13000400 0 0x400>;
+			clocks = <&cpg CPG_MOD 0x51>, <&cpg CPG_MOD 0x52>;
+			clock-names = "pclk", "oscclk";
+			resets = <&cpg 0x78>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		tsu: thermal@14002000 {
+			compatible = "renesas,r9a09g047-tsu";
+			reg = <0 0x14002000 0 0x1000>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "adi", "adcmpi";
+			clocks = <&cpg CPG_MOD 0x10a>;
+			resets = <&cpg 0xf8>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <0>;
+			renesas,tsu-trim = <&sys 0x330>;
+		};
+
+		i2c0: i2c@14400400 {
+			compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057";
+			reg = <0 0x14400400 0 0x400>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 507 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 506 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x94>;
+			resets = <&cpg 0x98>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@14400800 {
+			compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057";
+			reg = <0 0x14400800 0 0x400>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 508 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x95>;
+			resets = <&cpg 0x99>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@14400c00 {
+			compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057";
+			reg = <0 0x14400c00 0 0x400>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 511 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x96>;
+			resets = <&cpg 0x9a>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@14401000 {
+			compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057";
+			reg = <0 0x14401000 0 0x400>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 513 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 512 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x97>;
+			resets = <&cpg 0x9b>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@14401400 {
+			compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057";
+			reg = <0 0x14401400 0 0x400>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 515 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 514 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x98>;
+			resets = <&cpg 0x9c>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@14401800 {
+			compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057";
+			reg = <0 0x14401800 0 0x400>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 517 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 516 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x99>;
+			resets = <&cpg 0x9d>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@14401c00 {
+			compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057";
+			reg = <0 0x14401c00 0 0x400>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 519 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 518 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x9a>;
+			resets = <&cpg 0x9e>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@14402000 {
+			compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057";
+			reg = <0 0x14402000 0 0x400>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 520 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x9b>;
+			resets = <&cpg 0x9f>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@11c01000 {
+			compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057";
+			reg = <0 0x11c01000 0 0x400>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 523 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 522 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x93>;
+			resets = <&cpg 0xa0>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gpu: gpu@14850000 {
+			compatible = "renesas,r9a09g047-mali",
+				     "arm,mali-bifrost";
+			reg = <0x0 0x14850000 0x0 0x10000>;
+			interrupts = <GIC_SPI 884 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 883 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu", "event";
+			clocks = <&cpg CPG_MOD 0xf0>,
+				 <&cpg CPG_MOD 0xf1>,
+				 <&cpg CPG_MOD 0xf2>;
+			clock-names = "gpu", "bus", "bus_ace";
+			power-domains = <&cpg>;
+			resets = <&cpg 0xdd>, <&cpg 0xde>, <&cpg 0xdf>;
+			reset-names = "rst", "axi_rst", "ace_rst";
+			operating-points-v2 = <&gpu_opp_table>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@14900000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x14900000 0 0x20000>,
+			      <0x0 0x14940000 0 0x80000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		sdhi0: mmc@15c00000  {
+			compatible = "renesas,sdhi-r9a09g047", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c00000 0 0x10000>;
+			interrupts = <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xa3>, <&cpg CPG_MOD 0xa5>,
+				 <&cpg CPG_MOD 0xa4>, <&cpg CPG_MOD 0xa6>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa7>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi0_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI0-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi1: mmc@15c10000 {
+			compatible = "renesas,sdhi-r9a09g047", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c10000 0 0x10000>;
+			interrupts = <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xa7>, <&cpg CPG_MOD 0xa9>,
+				 <&cpg CPG_MOD 0xa8>, <&cpg CPG_MOD 0xaa>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa8>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi1_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI1-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi2: mmc@15c20000 {
+			compatible = "renesas,sdhi-r9a09g047", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c20000 0 0x10000>;
+			interrupts = <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xab>, <&cpg CPG_MOD 0xad>,
+				 <&cpg CPG_MOD 0xac>, <&cpg CPG_MOD 0xae>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa9>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi2_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI2-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		eth0: ethernet@15c30000 {
+			compatible = "renesas,r9a09g047-gbeth", "renesas,rzv2h-gbeth",
+				     "snps,dwmac-5.20";
+			reg = <0 0x15c30000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+				 <&cpg CPG_CORE R9A09G047_GBETH_0_CLK_PTP_REF_I>,
+				 <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
+				 <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref",
+				      "tx", "rx", "tx-180", "rx-180";
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "tx-queue-0", "tx-queue-1",
+					  "tx-queue-2", "tx-queue-3";
+			resets = <&cpg 0xb0>;
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,mixed-burst;
+			snps,force_sf_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup0>;
+			snps,mtl-tx-config = <&mtl_tx_setup0>;
+			snps,txpbl = <32>;
+			snps,rxpbl = <32>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup0: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+			};
+
+			mtl_tx_setup0: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+				};
+			};
+		};
+
+		eth1: ethernet@15c40000 {
+			compatible = "renesas,r9a09g047-gbeth", "renesas,rzv2h-gbeth",
+				     "snps,dwmac-5.20";
+			reg = <0 0x15c40000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
+				 <&cpg CPG_CORE R9A09G047_GBETH_1_CLK_PTP_REF_I>,
+				 <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
+				 <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref",
+				      "tx", "rx", "tx-180", "rx-180";
+			interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "tx-queue-0", "tx-queue-1",
+					  "tx-queue-2", "tx-queue-3";
+			resets = <&cpg 0xb1>;
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,mixed-burst;
+			snps,force_sf_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup1>;
+			snps,mtl-tx-config = <&mtl_tx_setup1>;
+			snps,txpbl = <32>;
+			snps,rxpbl = <32>;
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup1: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+			};
+
+			mtl_tx_setup1: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+				};
+			};
+		};
+
+		cru: video@16000000 {
+			compatible = "renesas,r9a09g047-cru";
+			reg = <0 0x16000000 0 0x400>;
+			clocks = <&cpg CPG_MOD 0xd3>,
+				 <&cpg CPG_MOD 0xd4>,
+				 <&cpg CPG_MOD 0xd2>;
+			clock-names = "video", "apb", "axi";
+			interrupts = <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 840 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 841 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "image_conv", "axi_mst_err",
+					  "vd_addr_wend", "sd_addr_wend",
+					  "vsd_addr_wend";
+			resets = <&cpg 0xc5>, <&cpg 0xc6>;
+			reset-names = "presetn", "aresetn";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+					crucsi2: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi2cru>;
+					};
+				};
+			};
+		};
+
+		csi2: csi2@16000400 {
+			compatible = "renesas,r9a09g047-csi2", "renesas,r9a09g057-csi2";
+			reg = <0 0x16000400 0 0xc00>;
+			interrupts = <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xd3>, <&cpg CPG_MOD 0xd4>;
+			clock-names = "video", "apb";
+			resets = <&cpg 0xc5>, <&cpg 0xc7>;
+			reset-names = "presetn", "cmn-rstb";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					csi2cru: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&crucsi2>;
+					};
+				};
+			};
+		};
+	};
+
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,lpi_en;
+		snps,wr_osr_lmt = <0xf>;
+		snps,rd_osr_lmt = <0xf>;
+		snps,blen = <16 8 4 0 0 0 0>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsu>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 3>, <&cpu1 0 3>,
+							 <&cpu2 0 3>, <&cpu3 0 3>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				target: trip-point {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor_crit: sensor-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e37.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047e37.dtsi
new file mode 100644
index 000000000000..e50d9159e832
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g047e37.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3E R9A09G047E37 SoC specific parts
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g047.dtsi"
+
+/ {
+	compatible = "renesas,r9a09g047e37", "renesas,r9a09g047";
+
+	cpus {
+		/delete-node/ cpu@200;
+		/delete-node/ cpu@300;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc-cru-csi-ov5645.dtso
new file mode 100644
index 000000000000..0f18f68f8120
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/G3E SMARC EVK with OV5645 camera
+ * connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h>
+
+#define OV5645_PARENT_I2C i2c0
+#include "rz-smarc-cru-csi-ov5645.dtsi"
+
+&ov5645 {
+	enable-gpios = <&pinctrl RZG3E_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&pinctrl RZG3E_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
new file mode 100644
index 000000000000..08e814c03fa8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3E SMARC EVK board
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/* Switch selection settings */
+#define SW_LCD_EN		0
+#define SW_GPIO8_CAN0_STB	0
+#define SW_GPIO9_CAN1_STB	0
+#define SW_LCD_EN		0
+#define SW_PDM_EN		0
+#define SW_SD0_DEV_SEL		0
+#define SW_SDIO_M2E		0
+
+#define PMOD_GPIO4		0
+#define PMOD_GPIO6		0
+#define PMOD_GPIO7		0
+
+#define KEY_1_GPIO		RZG3E_GPIO(3, 1)
+#define KEY_2_GPIO		RZG3E_GPIO(8, 4)
+#define KEY_3_GPIO		RZG3E_GPIO(8, 5)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h>
+#include "r9a09g047e57.dtsi"
+#include "rzg3e-smarc-som.dtsi"
+#include "renesas-smarc2.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK version 2 based on r9a09g047e57";
+	compatible = "renesas,smarc2-evk", "renesas,rzg3e-smarcm",
+		     "renesas,r9a09g047e57", "renesas,r9a09g047";
+
+	vqmmc_sd1_pvdd: regulator-vqmmc-sd1-pvdd {
+		compatible = "regulator-gpio";
+		regulator-name = "SD1_PVDD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG3E_GPIO(1, 5) GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd_pins>;
+	pinctrl-names = "default";
+
+#if (!SW_PDM_EN)
+	channel1 {
+		status = "okay";
+#if (!SW_LCD_EN) && (SW_GPIO9_CAN1_STB)
+		phys = <&can_transceiver1>;
+#endif
+	};
+#endif
+
+#if (!SW_LCD_EN)
+	channel4 {
+		status = "okay";
+#if (SW_GPIO8_CAN0_STB)
+		phys = <&can_transceiver0>;
+#endif
+	};
+#endif
+};
+
+#if (!SW_LCD_EN) && (SW_GPIO8_CAN0_STB)
+&can_transceiver0 {
+	standby-gpios = <&pinctrl RZG3E_GPIO(5, 4) GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+#endif
+
+#if (!SW_LCD_EN) && (SW_GPIO9_CAN1_STB)
+&can_transceiver1 {
+	standby-gpios = <&pinctrl RZG3E_GPIO(5, 5) GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+#endif
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&keys {
+	pinctrl-0 = <&nmi_pins>;
+	pinctrl-names = "default";
+
+	key-sleep {
+		interrupts-extended = <&icu 0 IRQ_TYPE_EDGE_FALLING>;
+		linux,code = <KEY_SLEEP>;
+		label = "SLEEP";
+		debounce-interval = <20>;
+	};
+#if PMOD_GPIO4
+	/delete-node/ key-1;
+#endif
+
+#if SW_LCD_EN || PMOD_GPIO6
+	/delete-node/ key-2;
+#endif
+
+#if SW_LCD_EN || PMOD_GPIO7
+	/delete-node/ key-3;
+#endif
+};
+
+&pinctrl {
+	canfd_pins: canfd {
+		can1_pins: can1 {
+			pinmux = <RZG3E_PORT_PINMUX(L, 2, 3)>, /* RX */
+				 <RZG3E_PORT_PINMUX(L, 3, 3)>; /* TX */
+		};
+
+		can4_pins: can4 {
+			pinmux = <RZG3E_PORT_PINMUX(5, 2, 3)>, /* RX */
+				 <RZG3E_PORT_PINMUX(5, 3, 3)>; /* TX */
+		};
+	};
+
+	i2c0_pins: i2c0 {
+		pinmux = <RZG3E_PORT_PINMUX(D, 4, 4)>, /* SCL0 */
+			 <RZG3E_PORT_PINMUX(D, 5, 4)>; /* SDA0 */
+	};
+
+	nmi_pins: nmi {
+		pinmux = <RZG3E_PORT_PINMUX(S, 0, 0)>; /* NMI */
+		input-schmitt-enable;
+	};
+
+	scif_pins: scif {
+		pins = "SCIF_TXD", "SCIF_RXD";
+		renesas,output-impedance = <1>;
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG3E_GPIO(1, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1-cd {
+			pinmux = <RZG3E_PORT_PINMUX(1, 4, 8)>; /* SD1CD */
+		};
+
+		sd1-ctrl {
+			pinmux = <RZG3E_PORT_PINMUX(G, 0, 1)>, /* SD1CLK */
+				 <RZG3E_PORT_PINMUX(G, 1, 1)>; /* SD1CMD */
+		};
+
+		sd1-data {
+			pinmux = <RZG3E_PORT_PINMUX(G, 2, 1)>, /* SD1DAT0 */
+				 <RZG3E_PORT_PINMUX(G, 3, 1)>, /* SD1DAT1 */
+				 <RZG3E_PORT_PINMUX(G, 4, 1)>, /* SD1DAT2 */
+				 <RZG3E_PORT_PINMUX(G, 5, 1)>; /* SD1DAT3 */
+		};
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif_pins>;
+	pinctrl-names = "default";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sd1_pvdd>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047e57.dtsi
new file mode 100644
index 000000000000..98a5faebd47a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g047e57.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3E R9A09G047E57 SoC specific parts
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g047.dtsi"
+
+/ {
+	compatible = "renesas,r9a09g047e57", "renesas,r9a09g047";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
new file mode 100644
index 000000000000..8781c2fa7313
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
@@ -0,0 +1,976 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2N SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g056-cpg.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/* RZV2N_Px = Offset address of PFC_P_mn  - 0x20 */
+#define RZV2N_P0	0
+#define RZV2N_P1	1
+#define RZV2N_P2	2
+#define RZV2N_P3	3
+#define RZV2N_P4	4
+#define RZV2N_P5	5
+#define RZV2N_P6	6
+#define RZV2N_P7	7
+#define RZV2N_P8	8
+#define RZV2N_P9	9
+#define RZV2N_PA	10
+#define RZV2N_PB	11
+
+#define RZV2N_PORT_PINMUX(b, p, f)	RZG2L_PORT_PINMUX(RZV2N_P##b, p, f)
+#define RZV2N_GPIO(port, pin)		RZG2L_GPIO(RZV2N_P##port, pin)
+
+/ {
+	compatible = "renesas,r9a09g056";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	audio_extal_clk: audio-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/*
+	 * The default cluster table is based on the assumption that the PLLCA55 clock
+	 * frequency is set to 1.7GHz. The PLLCA55 clock frequency can be set to
+	 * 1.7/1.6/1.5/1.1 GHz based on the BOOTPLLCA_0/1 pins (and additionally can be
+	 * clocked to 1.8GHz as well). The table below should be overridden in the board
+	 * DTS based on the PLLCA55 clock frequency.
+	 */
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-212500000 {
+			opp-hz = /bits/ 64 <212500000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK1>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK3>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-level = <3>;
+		};
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-630000000 {
+			opp-hz = /bits/ 64 <630000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-315000000 {
+			opp-hz = /bits/ 64 <315000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-157500000 {
+			opp-hz = /bits/ 64 <157500000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-78750000 {
+			opp-hz = /bits/ 64 <78750000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-19687500 {
+			opp-hz = /bits/ 64 <19687500>;
+			opp-microvolt = <800000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	qextal_clk: qextal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	rtxin_clk: rtxin-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pinctrl: pinctrl@10410000 {
+			compatible = "renesas,r9a09g056-pinctrl";
+			reg = <0 0x10410000 0 0x10000>;
+			clocks = <&cpg CPG_CORE R9A09G056_IOTOP_0_SHCLK>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 96>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0xa5>, <&cpg 0xa6>;
+		};
+
+		cpg: clock-controller@10420000 {
+			compatible = "renesas,r9a09g056-cpg";
+			reg = <0 0x10420000 0 0x10000>;
+			clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>;
+			clock-names = "audio_extal", "rtxin", "qextal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sys: system-controller@10430000 {
+			compatible = "renesas,r9a09g056-sys";
+			reg = <0 0x10430000 0 0x10000>;
+			clocks = <&cpg CPG_CORE R9A09G056_SYS_0_PCLK>;
+			resets = <&cpg 0x30>;
+		};
+
+		xspi: spi@11030000 {
+			compatible = "renesas,r9a09g056-xspi", "renesas,r9a09g047-xspi";
+			reg = <0 0x11030000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>;
+			reg-names = "regs", "dirmap";
+			interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "pulse", "err_pulse";
+			clocks = <&cpg CPG_MOD 0x9f>,
+				 <&cpg CPG_MOD 0xa0>,
+				 <&cpg CPG_CORE R9A09G056_SPI_CLK_SPI>,
+				 <&cpg CPG_MOD 0xa1>;
+			clock-names = "ahb", "axi", "spi", "spix2";
+			resets = <&cpg 0xa3>, <&cpg 0xa4>;
+			reset-names = "hresetn", "aresetn";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ostm0: timer@11800000 {
+			compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+			reg = <0x0 0x11800000 0x0 0x1000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 0x43>;
+			resets = <&cpg 0x6d>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@11801000 {
+			compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+			reg = <0x0 0x11801000 0x0 0x1000>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 0x44>;
+			resets = <&cpg 0x6e>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@14000000 {
+			compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+			reg = <0x0 0x14000000 0x0 0x1000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 0x45>;
+			resets = <&cpg 0x6f>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm3: timer@14001000 {
+			compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+			reg = <0x0 0x14001000 0x0 0x1000>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 0x46>;
+			resets = <&cpg 0x70>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm4: timer@12c00000 {
+			compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+			reg = <0x0 0x12c00000 0x0 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 0x47>;
+			resets = <&cpg 0x71>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm5: timer@12c01000 {
+			compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+			reg = <0x0 0x12c01000 0x0 0x1000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 0x48>;
+			resets = <&cpg 0x72>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm6: timer@12c02000 {
+			compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+			reg = <0x0 0x12c02000 0x0 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 0x49>;
+			resets = <&cpg 0x73>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm7: timer@12c03000 {
+			compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+			reg = <0x0 0x12c03000 0x0 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 0x4a>;
+			resets = <&cpg 0x74>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@11c00400 {
+			compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
+			reg = <0 0x11c00400 0 0x400>;
+			clocks = <&cpg CPG_MOD 0x4b>, <&cpg CPG_MOD 0x4c>;
+			clock-names = "pclk", "oscclk";
+			resets = <&cpg 0x75>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@14400000 {
+			compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
+			reg = <0 0x14400000 0 0x400>;
+			clocks = <&cpg CPG_MOD 0x4d>, <&cpg CPG_MOD 0x4e>;
+			clock-names = "pclk", "oscclk";
+			resets = <&cpg 0x76>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt2: watchdog@13000000 {
+			compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
+			reg = <0 0x13000000 0 0x400>;
+			clocks = <&cpg CPG_MOD 0x4f>, <&cpg CPG_MOD 0x50>;
+			clock-names = "pclk", "oscclk";
+			resets = <&cpg 0x77>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt3: watchdog@13000400 {
+			compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
+			reg = <0 0x13000400 0 0x400>;
+			clocks = <&cpg CPG_MOD 0x51>, <&cpg CPG_MOD 0x52>;
+			clock-names = "pclk", "oscclk";
+			resets = <&cpg 0x78>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif: serial@11c01400 {
+			compatible = "renesas,scif-r9a09g056",
+				     "renesas,scif-r9a09g057";
+			reg = <0 0x11c01400 0 0x400>;
+			interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 536 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 537 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eri", "rxi", "txi", "bri", "dri",
+					  "tei", "tei-dri", "rxi-edge", "txi-edge";
+			clocks = <&cpg CPG_MOD 0x8f>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg 0x95>;
+			status = "disabled";
+		};
+
+		i3c: i3c@12400000 {
+			compatible = "renesas,r9a09g056-i3c", "renesas,r9a09g047-i3c";
+			reg = <0 0x12400000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0x91>, <&cpg CPG_MOD 0x92>, <&cpg CPG_MOD 0x90>;
+			clock-names = "pclk", "tclk", "pclkrw";
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 678 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 679 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 680 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 681 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 682 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ierr", "terr", "abort", "resp",
+					  "cmd", "ibi", "rx", "tx", "rcv",
+					  "st", "sp", "tend", "nack",
+					  "al", "tmo", "wu";
+			resets = <&cpg 0x96>, <&cpg 0x97>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@14400400 {
+			compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+			reg = <0 0x14400400 0 0x400>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 507 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 506 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x94>;
+			resets = <&cpg 0x98>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@14400800 {
+			compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+			reg = <0 0x14400800 0 0x400>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 508 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x95>;
+			resets = <&cpg 0x99>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@14400c00 {
+			compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+			reg = <0 0x14400c00 0 0x400>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 511 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x96>;
+			resets = <&cpg 0x9a>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@14401000 {
+			compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+			reg = <0 0x14401000 0 0x400>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 513 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 512 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x97>;
+			resets = <&cpg 0x9b>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@14401400 {
+			compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+			reg = <0 0x14401400 0 0x400>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 515 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 514 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x98>;
+			resets = <&cpg 0x9c>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@14401800 {
+			compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+			reg = <0 0x14401800 0 0x400>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 517 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 516 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x99>;
+			resets = <&cpg 0x9d>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@14401c00 {
+			compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+			reg = <0 0x14401c00 0 0x400>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 519 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 518 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x9a>;
+			resets = <&cpg 0x9e>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@14402000 {
+			compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+			reg = <0 0x14402000 0 0x400>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 520 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x9b>;
+			resets = <&cpg 0x9f>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@11c01000 {
+			compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+			reg = <0 0x11c01000 0 0x400>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 523 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 522 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD 0x93>;
+			resets = <&cpg 0xa0>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gpu: gpu@14850000 {
+			compatible = "renesas,r9a09g056-mali",
+				     "arm,mali-bifrost";
+			reg = <0x0 0x14850000 0x0 0x10000>;
+			interrupts = <GIC_SPI 884 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 883 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu", "event";
+			clocks = <&cpg CPG_MOD 0xf0>,
+				 <&cpg CPG_MOD 0xf1>,
+				 <&cpg CPG_MOD 0xf2>;
+			clock-names = "gpu", "bus", "bus_ace";
+			resets = <&cpg 0xdd>,
+				 <&cpg 0xde>,
+				 <&cpg 0xdf>;
+			reset-names = "rst", "axi_rst", "ace_rst";
+			power-domains = <&cpg>;
+			operating-points-v2 = <&gpu_opp_table>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@14900000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x14900000 0 0x20000>,
+			      <0x0 0x14940000 0 0x80000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		ohci0: usb@15800000 {
+			compatible = "generic-ohci";
+			reg = <0 0x15800000 0 0x100>;
+			interrupts = <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>;
+			resets = <&usb20phyrst>, <&cpg 0xac>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@15800100 {
+			compatible = "generic-ehci";
+			reg = <0 0x15800100 0 0x100>;
+			interrupts = <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>;
+			resets = <&usb20phyrst>, <&cpg 0xac>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@15800200 {
+			compatible = "renesas,usb2-phy-r9a09g056", "renesas,usb2-phy-r9a09g057";
+			reg = <0 0x15800200 0 0x700>;
+			interrupts = <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb3>,
+				 <&cpg CPG_CORE R9A09G056_USB2_0_CLK_CORE0>;
+			clock-names = "fck", "usb_x1";
+			resets = <&usb20phyrst>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@15820000 {
+			compatible = "renesas,usbhs-r9a09g056",
+				     "renesas,rzg2l-usbhs";
+			reg = <0 0x15820000 0 0x10000>;
+			interrupts = <GIC_SPI 751 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb5>;
+			resets = <&usb20phyrst>,
+				 <&cpg 0xae>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb20phyrst: usb20phy-reset@15830000 {
+			compatible = "renesas,r9a09g056-usb2phy-reset",
+				     "renesas,r9a09g057-usb2phy-reset";
+			reg = <0 0x15830000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0xb6>;
+			resets = <&cpg 0xaf>;
+			power-domains = <&cpg>;
+			#reset-cells = <0>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@15c00000  {
+			compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c00000 0 0x10000>;
+			interrupts = <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xa3>, <&cpg CPG_MOD 0xa5>,
+				 <&cpg CPG_MOD 0xa4>, <&cpg CPG_MOD 0xa6>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa7>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi0_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI0-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi1: mmc@15c10000 {
+			compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c10000 0 0x10000>;
+			interrupts = <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xa7>, <&cpg CPG_MOD 0xa9>,
+				 <&cpg CPG_MOD 0xa8>, <&cpg CPG_MOD 0xaa>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa8>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi1_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI1-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi2: mmc@15c20000 {
+			compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x15c20000 0 0x10000>;
+			interrupts = <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xab>, <&cpg CPG_MOD 0xad>,
+				 <&cpg CPG_MOD 0xac>, <&cpg CPG_MOD 0xae>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg 0xa9>;
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi2_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI2-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		eth0: ethernet@15c30000 {
+			compatible = "renesas,r9a09g056-gbeth", "renesas,rzv2h-gbeth",
+				     "snps,dwmac-5.20";
+			reg = <0 0x15c30000 0 0x10000>;
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "tx-queue-0", "tx-queue-1",
+					  "tx-queue-2", "tx-queue-3";
+			clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+				 <&cpg CPG_CORE R9A09G056_GBETH_0_CLK_PTP_REF_I>,
+				 <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
+				 <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref",
+				      "tx", "rx", "tx-180", "rx-180";
+			resets = <&cpg 0xb0>;
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup0>;
+			snps,mtl-tx-config = <&mtl_tx_setup0>;
+			snps,txpbl = <32>;
+			snps,rxpbl = <32>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup0: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+			};
+
+			mtl_tx_setup0: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+				};
+			};
+		};
+
+		eth1: ethernet@15c40000 {
+			compatible = "renesas,r9a09g056-gbeth", "renesas,rzv2h-gbeth",
+				     "snps,dwmac-5.20";
+			reg = <0 0x15c40000 0 0x10000>;
+			interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "tx-queue-0", "tx-queue-1",
+					  "tx-queue-2", "tx-queue-3";
+			clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
+				 <&cpg CPG_CORE R9A09G056_GBETH_1_CLK_PTP_REF_I>,
+				 <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
+				 <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref",
+				      "tx", "rx", "tx-180", "rx-180";
+			resets = <&cpg 0xb1>;
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup1>;
+			snps,mtl-tx-config = <&mtl_tx_setup1>;
+			snps,txpbl = <32>;
+			snps,rxpbl = <32>;
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup1: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+			};
+
+			mtl_tx_setup1: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+				};
+			};
+		};
+	};
+
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,lpi_en;
+		snps,wr_osr_lmt = <0xf>;
+		snps,rd_osr_lmt = <0xf>;
+		snps,blen = <16 8 4 0 0 0 0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
new file mode 100644
index 000000000000..066e66b5d51a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2N EVK board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "r9a09g056.dtsi"
+
+/ {
+	model = "Renesas RZ/V2N EVK Board based on r9a09g056n48";
+	compatible = "renesas,rzv2n-evk", "renesas,r9a09g056n48", "renesas,r9a09g056";
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		mmc1 = &sdhi1;
+		serial0 = &scif;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x1 0xf8000000>;
+	};
+
+	reg_0p8v: regulator-0p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-0.8V";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vqmmc_sdhi1: regulator-vqmmc-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VqmmC";
+		gpios = <&pinctrl RZV2N_GPIO(A, 2) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+
+	/* 32.768kHz crystal */
+	x6: x6-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&audio_extal_clk {
+	clock-frequency = <22579200>;
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&reg_0p8v>;
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c8 {
+	pinctrl-0 = <&i2c8_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+
+	raa215300: pmic@12 {
+		compatible = "renesas,raa215300";
+		reg = <0x12>, <0x6f>;
+		reg-names = "main", "rtc";
+		clocks = <&x6>;
+		clock-names = "xin";
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txdv-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&mdio1 {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txdv-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ostm0 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&ostm3 {
+	status = "okay";
+};
+
+&ostm4 {
+	status = "okay";
+};
+
+&ostm5 {
+	status = "okay";
+};
+
+&ostm6 {
+	status = "okay";
+};
+
+&ostm7 {
+	status = "okay";
+};
+
+&pinctrl {
+	eth0_pins: eth0 {
+		pins = "ET0_TXC_TXCLK";
+		output-enable;
+	};
+
+	eth1_pins: eth1 {
+		pins = "ET1_TXC_TXCLK";
+		output-enable;
+	};
+
+	i2c0_pins: i2c0 {
+		pinmux = <RZV2N_PORT_PINMUX(3, 0, 1)>, /* I2C0_SDA */
+			 <RZV2N_PORT_PINMUX(3, 1, 1)>; /* I2C0_SCL */
+	};
+
+	i2c1_pins: i2c1 {
+		pinmux = <RZV2N_PORT_PINMUX(3, 2, 1)>, /* I2C1_SDA */
+			 <RZV2N_PORT_PINMUX(3, 3, 1)>; /* I2C1_SCL */
+	};
+
+	i2c2_pins: i2c2 {
+		pinmux = <RZV2N_PORT_PINMUX(2, 0, 4)>, /* I2C2_SDA */
+			 <RZV2N_PORT_PINMUX(2, 1, 4)>; /* I2C2_SCL */
+	};
+
+	i2c3_pins: i2c3 {
+		pinmux = <RZV2N_PORT_PINMUX(3, 6, 1)>, /* I2C3_SDA */
+			 <RZV2N_PORT_PINMUX(3, 7, 1)>; /* I2C3_SCL */
+	};
+
+	i2c6_pins: i2c6 {
+		pinmux = <RZV2N_PORT_PINMUX(4, 4, 1)>, /* I2C6_SDA */
+			 <RZV2N_PORT_PINMUX(4, 5, 1)>; /* I2C6_SCL */
+		/* There are no pull-up resistors on the EVK, so enable the internal pull-up */
+		bias-pull-up;
+	};
+
+	i2c7_pins: i2c7 {
+		pinmux = <RZV2N_PORT_PINMUX(4, 6, 1)>, /* I2C7_SDA */
+			 <RZV2N_PORT_PINMUX(4, 7, 1)>; /* I2C7_SCL */
+		/* There are no pull-up resistors on the EVK, so enable the internal pull-up */
+		bias-pull-up;
+	};
+
+	i2c8_pins: i2c8 {
+		pinmux = <RZV2N_PORT_PINMUX(0, 6, 1)>, /* I2C8_SDA */
+			 <RZV2N_PORT_PINMUX(0, 7, 1)>; /* I2C8_SCL */
+	};
+
+	scif_pins: scif {
+		pins = "SCIF_TXD", "SCIF_RXD";
+		renesas,output-impedance = <1>;
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZV2N_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1-cd {
+			pinmux = <RZV2N_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */
+		};
+
+		sd1-clk {
+			pins = "SD1CLK";
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+
+		sd1-dat-cmd {
+			pins = "SD1DAT0", "SD1DAT1", "SD1DAT2", "SD1DAT3", "SD1CMD";
+			input-enable;
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+	};
+
+	usb20_pins: usb20 {
+		ovc {
+			pinmux = <RZV2N_PORT_PINMUX(9, 6, 14)>; /* OVC */
+		};
+
+		vbus {
+			pinmux = <RZV2N_PORT_PINMUX(9, 5, 14)>; /* VBUS */
+		};
+	};
+
+	xspi_pins: xspi0 {
+		ctrl {
+			pins = "XSPI0_RESET0N", "XSPI0_CS0N", "XSPI0_CKP";
+			output-enable;
+		};
+
+		io {
+			pins = "XSPI0_IO0", "XSPI0_IO1", "XSPI0_IO2", "XSPI0_IO3";
+			renesas,output-impedance = <3>;
+		};
+	};
+};
+
+&qextal_clk {
+	clock-frequency = <24000000>;
+};
+
+&rtxin_clk {
+	clock-frequency = <32768>;
+};
+
+&scif {
+	pinctrl-0 = <&scif_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&usb20phyrst {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb20_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&xspi {
+	pinctrl-0 = <&xspi_pins>;
+	pinctrl-names = "default";
+	/*
+	 * MT25QU512ABB8E12 flash chip is capable of running at 166MHz
+	 * clock frequency. Set the clock frequency to the maximum 133MHz
+	 * supported by the RZ/V2N SoC.
+	 */
+	assigned-clocks = <&cpg CPG_CORE R9A09G056_SPI_CLK_SPI>;
+	assigned-clock-rates = <133333334>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		vcc-supply = <&reg_1p8v>;
+		m25p,fast-read;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x00000000 0x00060000>;
+			};
+
+			partition@60000 {
+				label = "fip";
+				reg = <0x00060000 0x1fa0000>;
+			};
+
+			partition@2000000 {
+				label = "user";
+				reg = <0x2000000 0x2000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
index 1c550b22b164..4df32d7e9998 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
@@ -12,6 +12,7 @@
 	compatible = "renesas,r9a09g057";
 	#address-cells = <2>;
 	#size-cells = <2>;
+	interrupt-parent = <&gic>;
 
 	audio_extal_clk: audio-clk {
 		compatible = "fixed-clock";
@@ -64,6 +65,7 @@
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A09G057_CA55_0_CORE_CLK0>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -74,6 +76,7 @@
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A09G057_CA55_0_CORE_CLK1>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -84,6 +87,7 @@
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A09G057_CA55_0_CORE_CLK2>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -94,6 +98,7 @@
 			next-level-cache = <&L3_CA55>;
 			enable-method = "psci";
 			clocks = <&cpg CPG_CORE R9A09G057_CA55_0_CORE_CLK3>;
+			#cooling-cells = <2>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
 
@@ -105,6 +110,40 @@
 		};
 	};
 
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-630000000 {
+			opp-hz = /bits/ 64 <630000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-315000000 {
+			opp-hz = /bits/ 64 <315000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-157500000 {
+			opp-hz = /bits/ 64 <157500000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-78750000 {
+			opp-hz = /bits/ 64 <78750000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-19687500 {
+			opp-hz = /bits/ 64 <19687500>;
+			opp-microvolt = <800000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
@@ -126,7 +165,6 @@
 
 	soc: soc {
 		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -249,9 +287,220 @@
 			reg = <0 0x10430000 0 0x10000>;
 			clocks = <&cpg CPG_CORE R9A09G057_SYS_0_PCLK>;
 			resets = <&cpg 0x30>;
+		};
+
+		tsu0: thermal@11000000 {
+			compatible = "renesas,r9a09g057-tsu", "renesas,r9a09g047-tsu";
+			reg = <0 0x11000000 0 0x1000>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "adi", "adcmpi";
+			clocks = <&cpg CPG_MOD 0x109>;
+			resets = <&cpg 0xf7>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <0>;
+			renesas,tsu-trim = <&sys 0x320>;
+		};
+
+		tsu1: thermal@14002000 {
+			compatible = "renesas,r9a09g057-tsu", "renesas,r9a09g047-tsu";
+			reg = <0 0x14002000 0 0x1000>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "adi", "adcmpi";
+			clocks = <&cpg CPG_MOD 0x10a>;
+			resets = <&cpg 0xf8>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <0>;
+			renesas,tsu-trim = <&sys 0x330>;
+		};
+
+		xspi: spi@11030000 {
+			compatible = "renesas,r9a09g057-xspi", "renesas,r9a09g047-xspi";
+			reg = <0 0x11030000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>;
+			reg-names = "regs", "dirmap";
+			interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "pulse", "err_pulse";
+			clocks = <&cpg CPG_MOD 0x9f>,
+				 <&cpg CPG_MOD 0xa0>,
+				 <&cpg CPG_CORE R9A09G057_SPI_CLK_SPI>,
+				 <&cpg CPG_MOD 0xa1>;
+			clock-names = "ahb", "axi", "spi", "spix2";
+			resets = <&cpg 0xa3>, <&cpg 0xa4>;
+			reset-names = "hresetn", "aresetn";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		dmac0: dma-controller@11400000 {
+			compatible = "renesas,r9a09g057-dmac";
+			reg = <0 0x11400000 0 0x10000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 89  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 90  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 91  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 92  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 93  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 94  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 95  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 96  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 97  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 98  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 99  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 101 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 104 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x0>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x31>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 4>;
+		};
+
+		dmac1: dma-controller@14830000 {
+			compatible = "renesas,r9a09g057-dmac";
+			reg = <0 0x14830000 0 0x10000>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 25  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 26  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 27  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 28  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 29  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 30  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 31  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 33  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 40  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x1>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x32>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 0>;
+		};
+
+		dmac2: dma-controller@14840000 {
+			compatible = "renesas,r9a09g057-dmac";
+			reg = <0 0x14840000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 41  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 42  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 43  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 44  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 45  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 46  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 47  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 48  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 49  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 50  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 51  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 52  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 53  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 54  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 55  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 56  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x2>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x33>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 1>;
+		};
+
+		dmac3: dma-controller@12000000 {
+			compatible = "renesas,r9a09g057-dmac";
+			reg = <0 0x12000000 0 0x10000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 57  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 58  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 59  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 60  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 61  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 62  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 63  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 64  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 65  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 66  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 67  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 68  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 69  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 70  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 71  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 72  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x3>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x34>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 2>;
+		};
+
+		dmac4: dma-controller@12010000 {
+			compatible = "renesas,r9a09g057-dmac";
+			reg = <0 0x12010000 0 0x10000>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 73  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 74  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 75  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 76  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 77  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 79  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 81  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 82  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 83  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 84  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 85  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 87  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 88  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x4>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x35>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 3>;
+		};
+
 		ostm0: timer@11800000 {
 			compatible = "renesas,r9a09g057-ostm", "renesas,ostm";
 			reg = <0x0 0x11800000 0x0 0x1000>;
@@ -372,6 +621,21 @@
 			status = "disabled";
 		};
 
+		rtc: rtc@11c00800 {
+			compatible = "renesas,r9a09g057-rtca3", "renesas,rz-rtca3";
+			reg = <0 0x11c00800 0 0x400>;
+			interrupts = <GIC_SPI 524 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 525 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 526 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "alarm", "period", "carry";
+			clocks = <&cpg CPG_MOD 0x53>, <&rtxin_clk>;
+			clock-names = "bus", "counter";
+			power-domains = <&cpg>;
+			resets = <&cpg 0x79>, <&cpg 0x7a>;
+			reset-names = "rtc", "rtest";
+			status = "disabled";
+		};
+
 		scif: serial@11c01400 {
 			compatible = "renesas,scif-r9a09g057";
 			reg = <0 0x11c01400 0 0x400>;
@@ -393,6 +657,102 @@
 			status = "disabled";
 		};
 
+		i3c: i3c@12400000 {
+			compatible = "renesas,r9a09g057-i3c", "renesas,r9a09g047-i3c";
+			reg = <0 0x12400000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0x91>, <&cpg CPG_MOD 0x92>, <&cpg CPG_MOD 0x90>;
+			clock-names = "pclk", "tclk", "pclkrw";
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 678 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 679 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 680 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 681 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 682 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ierr", "terr", "abort", "resp",
+					  "cmd", "ibi", "rx", "tx", "rcv",
+					  "st", "sp", "tend", "nack",
+					  "al", "tmo", "wu";
+			resets = <&cpg 0x96>, <&cpg 0x97>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rspi0: spi@12800000 {
+			compatible = "renesas,r9a09g057-rspi";
+			reg = <0x0 0x12800000 0x0 0x400>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 500 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 501 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "idle", "error", "end", "rx", "tx";
+			clocks = <&cpg CPG_MOD 0x54>,
+				 <&cpg CPG_MOD 0x55>,
+				 <&cpg CPG_MOD 0x56>;
+			clock-names = "pclk", "pclk_sfr", "tclk";
+			resets = <&cpg 0x7b>, <&cpg 0x7c>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rspi1: spi@12800400 {
+			compatible = "renesas,r9a09g057-rspi";
+			reg = <0x0 0x12800400 0x0 0x400>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 502 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 503 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "idle", "error", "end", "rx", "tx";
+			clocks = <&cpg CPG_MOD 0x57>,
+				 <&cpg CPG_MOD 0x58>,
+				 <&cpg CPG_MOD 0x59>;
+			clock-names = "pclk", "pclk_sfr", "tclk";
+			resets = <&cpg 0x7d>, <&cpg 0x7e>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rspi2: spi@12800800 {
+			compatible = "renesas,r9a09g057-rspi";
+			reg = <0x0 0x12800800 0x0 0x400>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 504 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 505 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "idle", "error", "end", "rx", "tx";
+			clocks = <&cpg CPG_MOD 0x5a>,
+				 <&cpg CPG_MOD 0x5b>,
+				 <&cpg CPG_MOD 0x5c>;
+			clock-names = "pclk", "pclk_sfr", "tclk";
+			resets = <&cpg 0x7f>, <&cpg 0x80>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@14400400 {
 			compatible = "renesas,riic-r9a09g057";
 			reg = <0 0x14400400 0 0x400>;
@@ -582,6 +942,28 @@
 			status = "disabled";
 		};
 
+		gpu: gpu@14850000 {
+			compatible = "renesas,r9a09g057-mali",
+				     "arm,mali-bifrost";
+			reg = <0x0 0x14850000 0x0 0x10000>;
+			interrupts = <GIC_SPI 884 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 883 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu", "event";
+			clocks = <&cpg CPG_MOD 0xf0>,
+				 <&cpg CPG_MOD 0xf1>,
+				 <&cpg CPG_MOD 0xf2>;
+			clock-names = "gpu", "bus", "bus_ace";
+			power-domains = <&cpg>;
+			resets = <&cpg 0xdd>,
+				 <&cpg 0xde>,
+				 <&cpg 0xdf>;
+			reset-names = "rst", "axi_rst", "ace_rst";
+			operating-points-v2 = <&gpu_opp_table>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@14900000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x14900000 0 0x20000>,
@@ -592,6 +974,119 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 		};
 
+		ohci0: usb@15800000 {
+			compatible = "generic-ohci";
+			reg = <0 0x15800000 0 0x100>;
+			interrupts = <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>;
+			resets = <&usb20phyrst>, <&cpg 0xac>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@15810000 {
+			compatible = "generic-ohci";
+			reg = <0 0x15810000 0 0x100>;
+			interrupts = <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb4>, <&cpg CPG_MOD 0xb7>;
+			resets = <&usb21phyrst>, <&cpg 0xad>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@15800100 {
+			compatible = "generic-ehci";
+			reg = <0 0x15800100 0 0x100>;
+			interrupts = <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>;
+			resets = <&usb20phyrst>, <&cpg 0xac>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@15810100 {
+			compatible = "generic-ehci";
+			reg = <0 0x15810100 0 0x100>;
+			interrupts = <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb4>, <&cpg CPG_MOD 0xb7>;
+			resets = <&usb21phyrst>, <&cpg 0xad>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@15800200 {
+			compatible = "renesas,usb2-phy-r9a09g057";
+			reg = <0 0x15800200 0 0x700>;
+			interrupts = <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb3>,
+				 <&cpg CPG_CORE R9A09G057_USB2_0_CLK_CORE0>;
+			clock-names = "fck", "usb_x1";
+			resets = <&usb20phyrst>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@15810200 {
+			compatible = "renesas,usb2-phy-r9a09g057";
+			reg = <0 0x15810200 0 0x700>;
+			interrupts = <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb4>,
+				 <&cpg CPG_CORE R9A09G057_USB2_0_CLK_CORE1>;
+			clock-names = "fck", "usb_x1";
+			resets = <&usb21phyrst>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@15820000 {
+			compatible = "renesas,usbhs-r9a09g057",
+				     "renesas,rzg2l-usbhs";
+			reg = <0 0x15820000 0 0x10000>;
+			interrupts = <GIC_SPI 751 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb5>;
+			resets = <&usb20phyrst>,
+				 <&cpg 0xae>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb20phyrst: usb20phy-reset@15830000 {
+			compatible = "renesas,r9a09g057-usb2phy-reset";
+			reg = <0 0x15830000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0xb6>;
+			resets = <&cpg 0xaf>;
+			power-domains = <&cpg>;
+			#reset-cells = <0>;
+			status = "disabled";
+		};
+
+		usb21phyrst: usb21phy-reset@15840000 {
+			compatible = "renesas,r9a09g057-usb2phy-reset";
+			reg = <0 0x15840000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0xb7>;
+			resets = <&cpg 0xaf>;
+			power-domains = <&cpg>;
+			#reset-cells = <0>;
+			status = "disabled";
+		};
+
 		sdhi0: mmc@15c00000  {
 			compatible = "renesas,sdhi-r9a09g057";
 			reg = <0x0 0x15c00000 0 0x10000>;
@@ -603,6 +1098,13 @@
 			resets = <&cpg 0xa7>;
 			power-domains = <&cpg>;
 			status = "disabled";
+
+			sdhi0_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI0-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
 		};
 
 		sdhi1: mmc@15c10000 {
@@ -616,6 +1118,13 @@
 			resets = <&cpg 0xa8>;
 			power-domains = <&cpg>;
 			status = "disabled";
+
+			sdhi1_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI1-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
 		};
 
 		sdhi2: mmc@15c20000 {
@@ -629,16 +1138,277 @@
 			resets = <&cpg 0xa9>;
 			power-domains = <&cpg>;
 			status = "disabled";
+
+			sdhi2_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI2-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		eth0: ethernet@15c30000 {
+			compatible = "renesas,r9a09g057-gbeth", "renesas,rzv2h-gbeth",
+				     "snps,dwmac-5.20";
+			reg = <0 0x15c30000 0 0x10000>;
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "tx-queue-0", "tx-queue-1",
+					  "tx-queue-2", "tx-queue-3";
+			clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+				 <&cpg CPG_CORE R9A09G057_GBETH_0_CLK_PTP_REF_I>,
+				 <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
+				 <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref",
+				      "tx", "rx", "tx-180", "rx-180";
+			resets = <&cpg 0xb0>;
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup0>;
+			snps,mtl-tx-config = <&mtl_tx_setup0>;
+			snps,txpbl = <32>;
+			snps,rxpbl = <32>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup0: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+			};
+
+			mtl_tx_setup0: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+				};
+			};
+		};
+
+		eth1: ethernet@15c40000 {
+			compatible = "renesas,r9a09g057-gbeth", "renesas,rzv2h-gbeth",
+				     "snps,dwmac-5.20";
+			reg = <0 0x15c40000 0 0x10000>;
+			interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "tx-queue-0", "tx-queue-1",
+					  "tx-queue-2", "tx-queue-3";
+			clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
+				 <&cpg CPG_CORE R9A09G057_GBETH_1_CLK_PTP_REF_I>,
+				 <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
+				 <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref",
+				      "tx", "rx", "tx-180", "rx-180";
+			resets = <&cpg 0xb1>;
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup1>;
+			snps,mtl-tx-config = <&mtl_tx_setup1>;
+			snps,txpbl = <32>;
+			snps,rxpbl = <32>;
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup1: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+			};
+
+			mtl_tx_setup1: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+				};
+			};
+		};
+	};
+
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,lpi_en;
+		snps,wr_osr_lmt = <0xf>;
+		snps,rd_osr_lmt = <0xf>;
+		snps,blen = <16 8 4 0 0 0 0>;
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsu0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&tsu1>;
+
+			cooling-maps {
+				map0 {
+					trip = <&sensor2_target>;
+					cooling-device = <&cpu0 0 3>, <&cpu1 0 3>,
+							 <&cpu2 0 3>, <&cpu3 0 3>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor2_target: trip-point {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
index 4703da8e9cff..445fce156f73 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
@@ -7,8 +7,9 @@
 
 /dts-v1/;
 
-#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+#include <dt-bindings/pinctrl/renesas,r9a09g057-pinctrl.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include "r9a09g057.dtsi"
 
 / {
@@ -16,6 +17,8 @@
 	compatible = "renesas,rzv2h-evk", "renesas,r9a09g057h44", "renesas,r9a09g057";
 
 	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -32,6 +35,18 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	keys: keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			interrupts-extended = <&icu 0 IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_WAKEUP>;
+			label = "NMI_SW";
+			debounce-interval = <20>;
+			wakeup-source;
+		};
+	};
+
 	memory@48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
@@ -43,7 +58,26 @@
 		reg = <0x2 0x40000000 0x2 0x00000000>;
 	};
 
-	reg_3p3v: regulator1 {
+	reg_0p8v: regulator-0p8v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "fixed-0.8V";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 
 		regulator-name = "fixed-3.3V";
@@ -56,18 +90,60 @@
 	vqmmc_sdhi1: regulator-vccq-sdhi1 {
 		compatible = "regulator-gpio";
 		regulator-name = "SDHI1 VccQ";
-		gpios = <&pinctrl RZG2L_GPIO(10, 2) GPIO_ACTIVE_HIGH>;
+		gpios = <&pinctrl RZV2H_GPIO(A, 2) GPIO_ACTIVE_HIGH>;
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		gpios-states = <0>;
 		states = <3300000 0>, <1800000 1>;
 	};
+
+	/* 32.768kHz crystal */
+	x6: x6-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
 };
 
 &audio_extal_clk {
 	clock-frequency = <22579200>;
 };
 
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&reg_0p8v>;
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
@@ -122,6 +198,61 @@
 	clock-frequency = <400000>;
 
 	status = "okay";
+
+	raa215300: pmic@12 {
+		compatible = "renesas,raa215300";
+		reg = <0x12>, <0x6f>;
+		reg-names = "main", "rtc";
+		clocks = <&x6>;
+		clock-names = "xin";
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txdv-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&mdio1 {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txdv-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
 };
 
 &ostm0 {
@@ -157,39 +288,49 @@
 };
 
 &pinctrl {
+	eth0_pins: eth0 {
+		pins = "ET0_TXC_TXCLK";
+		output-enable;
+	};
+
+	eth1_pins: eth1 {
+		pins = "ET1_TXC_TXCLK";
+		output-enable;
+	};
+
 	i2c0_pins: i2c0 {
-		pinmux = <RZG2L_PORT_PINMUX(3, 0, 1)>, /* I2C0_SDA */
-			 <RZG2L_PORT_PINMUX(3, 1, 1)>; /* I2C0_SCL */
+		pinmux = <RZV2H_PORT_PINMUX(3, 0, 1)>, /* I2C0_SDA */
+			 <RZV2H_PORT_PINMUX(3, 1, 1)>; /* I2C0_SCL */
 	};
 
 	i2c1_pins: i2c1 {
-		pinmux = <RZG2L_PORT_PINMUX(3, 2, 1)>, /* I2C1_SDA */
-			 <RZG2L_PORT_PINMUX(3, 3, 1)>; /* I2C1_SCL */
+		pinmux = <RZV2H_PORT_PINMUX(3, 2, 1)>, /* I2C1_SDA */
+			 <RZV2H_PORT_PINMUX(3, 3, 1)>; /* I2C1_SCL */
 	};
 
 	i2c2_pins: i2c2 {
-		pinmux = <RZG2L_PORT_PINMUX(2, 0, 4)>, /* I2C2_SDA */
-			 <RZG2L_PORT_PINMUX(2, 1, 4)>; /* I2C2_SCL */
+		pinmux = <RZV2H_PORT_PINMUX(2, 0, 4)>, /* I2C2_SDA */
+			 <RZV2H_PORT_PINMUX(2, 1, 4)>; /* I2C2_SCL */
 	};
 
 	i2c3_pins: i2c3 {
-		pinmux = <RZG2L_PORT_PINMUX(3, 6, 1)>, /* I2C3_SDA */
-			 <RZG2L_PORT_PINMUX(3, 7, 1)>; /* I2C3_SCL */
+		pinmux = <RZV2H_PORT_PINMUX(3, 6, 1)>, /* I2C3_SDA */
+			 <RZV2H_PORT_PINMUX(3, 7, 1)>; /* I2C3_SCL */
 	};
 
 	i2c6_pins: i2c6 {
-		pinmux = <RZG2L_PORT_PINMUX(4, 4, 1)>, /* I2C6_SDA */
-			 <RZG2L_PORT_PINMUX(4, 5, 1)>; /* I2C6_SCL */
+		pinmux = <RZV2H_PORT_PINMUX(4, 4, 1)>, /* I2C6_SDA */
+			 <RZV2H_PORT_PINMUX(4, 5, 1)>; /* I2C6_SCL */
 	};
 
 	i2c7_pins: i2c7 {
-		pinmux = <RZG2L_PORT_PINMUX(4, 6, 1)>, /* I2C7_SDA */
-			 <RZG2L_PORT_PINMUX(4, 7, 1)>; /* I2C7_SCL */
+		pinmux = <RZV2H_PORT_PINMUX(4, 6, 1)>, /* I2C7_SDA */
+			 <RZV2H_PORT_PINMUX(4, 7, 1)>; /* I2C7_SCL */
 	};
 
 	i2c8_pins: i2c8 {
-		pinmux = <RZG2L_PORT_PINMUX(0, 6, 1)>, /* I2C8_SDA */
-			 <RZG2L_PORT_PINMUX(0, 7, 1)>; /* I2C8_SCL */
+		pinmux = <RZV2H_PORT_PINMUX(0, 6, 1)>, /* I2C8_SDA */
+			 <RZV2H_PORT_PINMUX(0, 7, 1)>; /* I2C8_SCL */
 	};
 
 	scif_pins: scif {
@@ -199,7 +340,7 @@
 
 	sd1-pwr-en-hog {
 		gpio-hog;
-		gpios = <RZG2L_GPIO(10, 3) GPIO_ACTIVE_HIGH>;
+		gpios = <RZV2H_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "sd1_pwr_en";
 	};
@@ -219,7 +360,39 @@
 		};
 
 		sd1_cd {
-			pinmux = <RZG2L_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */
+			pinmux = <RZV2H_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */
+		};
+	};
+
+	usb20_pins: usb20 {
+		ovc {
+			pinmux = <RZV2H_PORT_PINMUX(9, 6, 14)>; /* OVC */
+		};
+
+		vbus {
+			pinmux = <RZV2H_PORT_PINMUX(9, 5, 14)>; /* VBUS */
+		};
+	};
+
+	usb21_pins: usb21 {
+		ovc {
+			pinmux = <RZV2H_PORT_PINMUX(6, 7, 14)>; /* OVC */
+		};
+
+		vbus {
+			pinmux = <RZV2H_PORT_PINMUX(6, 6, 14)>; /* VBUS */
+		};
+	};
+
+	xspi_pins: xspi0 {
+		ctrl {
+			pins = "XSPI0_RESET0N", "XSPI0_CS0N", "XSPI0_CKP";
+			output-enable;
+		};
+
+		io {
+			pins = "XSPI0_IO0", "XSPI0_IO1", "XSPI0_IO2", "XSPI0_IO3";
+			renesas,output-impedance = <3>;
 		};
 	};
 };
@@ -228,6 +401,10 @@
 	clock-frequency = <24000000>;
 };
 
+&rtc {
+	status = "okay";
+};
+
 &rtxin_clk {
 	clock-frequency = <32768>;
 };
@@ -251,6 +428,71 @@
 	status = "okay";
 };
 
+&usb20phyrst {
+	status = "okay";
+};
+
+&usb21phyrst {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb20_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb21_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &wdt1 {
 	status = "okay";
 };
+
+&xspi {
+	pinctrl-0 = <&xspi_pins>;
+	pinctrl-names = "default";
+	/*
+	 * MT25QU512ABB8E12 flash chip is capable of running at 166MHz
+	 * clock frequency. Set the clock frequency to the maximum 133MHz
+	 * supported by the RZ/V2H SoC.
+	 */
+	assigned-clocks = <&cpg CPG_CORE R9A09G057_SPI_CLK_SPI>;
+	assigned-clock-rates = <133333334>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		vcc-supply = <&reg_1p8v>;
+		m25p,fast-read;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x00000000 0x00060000>;
+			};
+
+			partition@60000 {
+				label = "fip";
+				reg = <0x00060000 0x1fa0000>;
+			};
+
+			partition@2000000 {
+				label = "user";
+				reg = <0x2000000 0x2000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts b/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
new file mode 100644
index 000000000000..adf3ab8aef2b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the Yuridenki-Shokai Kakip board
+ *
+ * Copyright (C) 2024 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/renesas,r9a09g057-pinctrl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "r9a09g057.dtsi"
+
+/ {
+	model = "Yuridenki-Shokai Kakip Board based on r9a09g057h48";
+	compatible = "yuridenki,kakip", "renesas,r9a09g057h48", "renesas,r9a09g057";
+
+	aliases {
+		serial0 = &scif;
+		mmc0 = &sdhi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x1 0xF8000000>;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vqmmc_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI0 VccQ";
+		gpios = <&pinctrl RZV2H_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+};
+
+&ostm0 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&ostm3 {
+	status = "okay";
+};
+
+&ostm4 {
+	status = "okay";
+};
+
+&ostm5 {
+	status = "okay";
+};
+
+&ostm6 {
+	status = "okay";
+};
+
+&ostm7 {
+	status = "okay";
+};
+
+&pinctrl {
+	scif_pins: scif {
+		pins = "SCIF_RXD", "SCIF_TXD";
+	};
+
+	sd0-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZV2H_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd0_pwr_en";
+	};
+
+	sdhi0_pins: sd0 {
+		sd0-clk {
+			pins = "SD0CLK";
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+
+		sd0-data {
+			pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0CMD";
+			input-enable;
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+
+		sd0-mux {
+			pinmux = <RZV2H_PORT_PINMUX(A, 5, 15)>; /* SD0_CD */
+		};
+	};
+};
+
+&qextal_clk {
+	clock-frequency = <24000000>;
+};
+
+&scif {
+	pinctrl-0 = <&scif_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sdhi0>;
+	bus-width = <4>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
new file mode 100644
index 000000000000..f5fa6ca06409
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
@@ -0,0 +1,952 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r9a09g077";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-level = <3>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sci0: serial@80005000 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80005000 0 0x400>;
+			interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci1: serial@80005400 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80005400 0 0x400>;
+			interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 596 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 9>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci2: serial@80005800 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80005800 0 0x400>;
+			interrupts = <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 600 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 10>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci3: serial@80005c00 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80005c00 0 0x400>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 11>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci4: serial@80006000 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80006000 0 0x400>;
+			interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 607 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 608 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 12>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci5: serial@81005000 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x81005000 0 0x400>;
+			interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 611 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 612 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 600>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@80082000 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80082000 0 0x400>,
+			      <0 0x81295100 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@80082400 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80082400 0 0x400>,
+			      <0 0x81295104 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt2: watchdog@80082800 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80082800 0 0x400>,
+			      <0 0x81295108 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt3: watchdog@80082c00 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80082c00 0 0x400>,
+			      <0 0x8129510c 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt4: watchdog@80083000 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80083000 0 0x400>,
+			      <0 0x81295110 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt5: watchdog@80083400 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80083400 0 0x400>,
+			      <0 0x81295114 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@80088000 {
+			compatible = "renesas,riic-r9a09g077";
+			reg = <0 0x80088000 0 0x400>;
+			interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 615 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 616 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 100>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@80088400 {
+			compatible = "renesas,riic-r9a09g077";
+			reg = <0 0x80088400 0 0x400>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 619 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 620 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 621 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 101>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@81008000 {
+			compatible = "renesas,riic-r9a09g077";
+			reg = <0 0x81008000 0 0x400>;
+			interrupts = <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 623 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gmac0: ethernet@80100000 {
+			compatible = "renesas,r9a09g077-gbeth", "snps,dwmac-5.20";
+			reg = <0 0x80100000 0 0x10000>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "rx-queue-4", "rx-queue-5",
+					  "rx-queue-6", "rx-queue-7", "tx-queue-0",
+					  "tx-queue-1", "tx-queue-2", "tx-queue-3",
+					  "tx-queue-4", "tx-queue-5", "tx-queue-6",
+					  "tx-queue-7";
+			clocks = <&cpg CPG_MOD 400>,
+				 <&cpg CPG_CORE R9A09G077_CLK_PCLKH>,
+				 <&cpg CPG_CORE R9A09G077_ETCLKB>;
+			clock-names = "stmmaceth", "pclk", "tx";
+			resets = <&cpg 400>, <&cpg 401>;
+			reset-names = "stmmaceth", "ahb";
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <32>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup0>;
+			snps,mtl-tx-config = <&mtl_tx_setup0>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup0: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+					snps,priority = <0x10>;
+					snps,map-to-dma-channel = <4>;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+					snps,priority = <0x20>;
+					snps,map-to-dma-channel = <5>;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+					snps,priority = <0x40>;
+					snps,map-to-dma-channel = <6>;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+					snps,priority = <0x80>;
+					snps,map-to-dma-channel = <7>;
+				};
+			};
+
+			mtl_tx_setup0: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+
+				queue0 {
+					snps,dcb-algorithm;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac1: ethernet@92000000 {
+			compatible = "renesas,r9a09g077-gbeth", "snps,dwmac-5.20";
+			reg = <0 0x92000000 0 0x10000>;
+			interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 522 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "rx-queue-4", "rx-queue-5",
+					  "rx-queue-6", "rx-queue-7", "tx-queue-0",
+					  "tx-queue-1", "tx-queue-2", "tx-queue-3",
+					  "tx-queue-4", "tx-queue-5", "tx-queue-6",
+					  "tx-queue-7";
+			clocks = <&cpg CPG_MOD 416>,
+				 <&cpg CPG_CORE R9A09G077_CLK_PCLKAH>,
+				 <&cpg CPG_CORE R9A09G077_ETCLKB>;
+			clock-names = "stmmaceth", "pclk", "tx";
+			resets = <&cpg 416>, <&cpg 417>;
+			reset-names = "stmmaceth", "ahb";
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <32>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup1>;
+			snps,mtl-tx-config = <&mtl_tx_setup1>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup1: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+					snps,priority = <0x10>;
+					snps,map-to-dma-channel = <4>;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+					snps,priority = <0x20>;
+					snps,map-to-dma-channel = <5>;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+					snps,priority = <0x40>;
+					snps,map-to-dma-channel = <6>;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+					snps,priority = <0x80>;
+					snps,map-to-dma-channel = <7>;
+				};
+			};
+
+			mtl_tx_setup1: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+
+				queue0 {
+					snps,dcb-algorithm;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac2: ethernet@92010000 {
+			compatible = "renesas,r9a09g077-gbeth", "snps,dwmac-5.20";
+			reg = <0 0x92010000 0 0x10000>;
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "rx-queue-4", "rx-queue-5",
+					  "rx-queue-6", "rx-queue-7", "tx-queue-0",
+					  "tx-queue-1", "tx-queue-2", "tx-queue-3",
+					  "tx-queue-4", "tx-queue-5", "tx-queue-6",
+					  "tx-queue-7";
+			clocks = <&cpg CPG_MOD 417>,
+				 <&cpg CPG_CORE R9A09G077_CLK_PCLKAH>,
+				 <&cpg CPG_CORE R9A09G077_ETCLKB>;
+			clock-names = "stmmaceth", "pclk", "tx";
+			resets = <&cpg 418>, <&cpg 419>;
+			reset-names = "stmmaceth", "ahb";
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <32>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup2>;
+			snps,mtl-tx-config = <&mtl_tx_setup2>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			status = "disabled";
+
+			mdio2: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup2: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+					snps,priority = <0x10>;
+					snps,map-to-dma-channel = <4>;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+					snps,priority = <0x20>;
+					snps,map-to-dma-channel = <5>;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+					snps,priority = <0x40>;
+					snps,map-to-dma-channel = <6>;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+					snps,priority = <0x80>;
+					snps,map-to-dma-channel = <7>;
+				};
+			};
+
+			mtl_tx_setup2: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+
+				queue0 {
+					snps,dcb-algorithm;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		ethss: ethss@80110000 {
+			compatible = "renesas,r9a09g077-miic";
+			reg =  <0 0x80110000 0 0x10000>;
+			clocks = <&cpg CPG_CORE R9A09G077_ETCLKE>,
+				 <&cpg CPG_CORE R9A09G077_ETCLKB>,
+				 <&cpg CPG_CORE R9A09G077_ETCLKD>,
+				 <&cpg CPG_MOD 403>;
+			clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
+			resets = <&cpg 405>, <&cpg 406>;
+			reset-names = "rst", "crst";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mii_conv0: mii-conv@0 {
+				reg = <0>;
+				status = "disabled";
+			};
+
+			mii_conv1: mii-conv@1 {
+				reg = <1>;
+				status = "disabled";
+			};
+
+			mii_conv2: mii-conv@2 {
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mii_conv3: mii-conv@3 {
+				reg = <3>;
+				status = "disabled";
+			};
+		};
+
+		cpg: clock-controller@80280000 {
+			compatible = "renesas,r9a09g077-cpg-mssr";
+			reg = <0 0x80280000 0 0x1000>,
+			      <0 0x81280000 0 0x9000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		pinctrl: pinctrl@802c0000 {
+			compatible = "renesas,r9a09g077-pinctrl";
+			reg = <0 0x802c0000 0 0x10000>,
+			      <0 0x812c0000 0 0x10000>,
+			      <0 0x802b0000 0 0x10000>;
+			reg-names = "nsr", "srs", "srn";
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 288>;
+			power-domains = <&cpg>;
+		};
+
+		gic: interrupt-controller@83000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x83000000 0 0x40000>,
+			      <0x0 0x83040000 0 0x160000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		adc0: adc@90014000 {
+			compatible = "renesas,r9a09g077-adc";
+			reg = <0 0x90014000 0 0x400>;
+			interrupts = <GIC_SPI 698 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 699 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 700 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 701 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 851 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 852 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>,
+				 <&cpg CPG_MOD 206>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		adc1: adc@90014400 {
+			compatible = "renesas,r9a09g077-adc";
+			reg = <0 0x90014400 0 0x400>;
+			interrupts = <GIC_SPI 703 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 704 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 705 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 853 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 854 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>,
+				 <&cpg CPG_MOD 207>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		adc2: adc@80008000 {
+			compatible = "renesas,r9a09g077-adc";
+			reg = <0 0x80008000 0 0x400>;
+			interrupts = <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 855 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 856 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>,
+				 <&cpg CPG_MOD 225>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		ohci: usb@92040000 {
+			compatible = "generic-ohci";
+			reg = <0 0x92040000 0 0x100>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci: usb@92040100 {
+			compatible = "generic-ehci";
+			reg = <0 0x92040100 0 0x100>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 2>;
+			phy-names = "usb";
+			companion = <&ohci>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy: usb-phy@92040200 {
+			compatible = "renesas,usb2-phy-r9a09g077";
+			reg = <0 0x92040200 0 0x700>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>,
+				 <&cpg CPG_CORE R9A09G077_USB_CLK>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@92041000 {
+			compatible = "renesas,usbhs-r9a09g077";
+			reg = <0 0x92041000 0 0x1000>;
+			interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@92080000  {
+			compatible = "renesas,sdhi-r9a09g077",
+				     "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x92080000 0 0x10000>;
+			interrupts = <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1212>,
+				 <&cpg CPG_CORE R9A09G077_SDHI_CLKHS>;
+			clock-names = "aclk", "clkh";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi0_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI0-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi1: mmc@92090000 {
+			compatible = "renesas,sdhi-r9a09g077",
+				     "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x92090000 0 0x10000>;
+			interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1213>,
+				 <&cpg CPG_CORE R9A09G077_SDHI_CLKHS>;
+			clock-names = "aclk", "clkh";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi1_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI1-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,lpi_en;
+		snps,wr_osr_lmt = <0xf>;
+		snps,rd_osr_lmt = <0xf>;
+		snps,blen = <16 8 4 0 0 0 0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
new file mode 100644
index 000000000000..b7706d0bc3aa
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H EVK board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include "r9a09g077m44.dtsi"
+
+/*
+ * SD0 can be connected to either eMMC (IC49) or SD card slot CN31
+ * Lets by default enable the eMMC, note we need the below SW settings
+ * for eMMC.
+ * SW2[1] = ON; SW2[2] = ON
+ *
+ * To enable SD card and disable eMMC on SDHI0 disable the below macro
+ * and set the below switch setting:
+ * SW2[1] = OFF; SW2[2] = ON
+ */
+#define SD0_EMMC	1
+#define SD0_SD		(!SD0_EMMC)
+
+/*
+ * P17_4 = SD1_CD; SW2[3] = ON
+ * P08_5 = SD1_PWEN; SW2[3] = ON
+ * P08_6 = SD1_IOVS; SW2[3] = ON; SW5[3] = OFF; SW5[4] = ON
+ */
+#define SD1_MICRO_SD	1
+
+/*
+ * USB Pin Configuration:
+ *
+ * This board is equipped with three USB connectors: Type-A (CN80), Mini-B
+ * (CN79), and Micro-AB (CN33). The RZ/T2H SoC has a single USB channel, so
+ * either the USB host interface or the USB function interface can be used,
+ * but not both simultaneously when using the CN79 and CN80 connectors.
+ *
+ * By default, the Type-A (CN80) and Mini-B (CN79) connectors are enabled.
+ * Configure the switches as follows:
+ *   - P00_0 - P00_2 (control signals for USB power supply): SW1[5] = ON
+ *   - USB_VBUSIN (used for USB function): SW7[7] = OFF; SW7[8] = ON
+ *   - USB_VBUSEN (used for USB_HF_VBUSEN): SW7[9] = OFF; SW7[10] = ON
+ *
+ * To enable the Micro-AB (CN33) USB OTG connector, set the following macro
+ * to 1 and configure the switches as follows:
+ *   - P00_0 - P00_2 (control signals for USB power supply): SW1[5] = ON
+ *   - USB_VBUSIN (used for USB OTG): SW7[7] = ON; SW7[8] = OFF
+ *   - USB_VBUSEN (used for USB_OTG_VBUSEN): SW7[9] = ON; SW7[10] = OFF
+ */
+#define USB_OTG		0
+
+#include "rzt2h-n2h-evk-common.dtsi"
+
+/ {
+	model = "Renesas RZ/T2H EVK Board based on r9a09g077m44";
+	compatible = "renesas,rzt2h-evk", "renesas,r9a09g077m44", "renesas,r9a09g077";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* SW8-9: ON, SW8-10: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(23, 1) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <0>;
+		};
+
+		led-1 {
+			/* SW5-1: OFF, SW5-2: ON */
+			gpios = <&pinctrl RZT2H_GPIO(32, 2) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+		};
+
+		led-2 {
+			gpios = <&pinctrl RZT2H_GPIO(6, 7) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+		};
+
+#if (!SD1_MICRO_SD)
+		led-3 {
+			/* SW2-3: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(8, 5) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <3>;
+		};
+#endif
+
+		led-4 {
+			/* SW8-3: ON, SW8-4: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(18, 0) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <4>;
+		};
+
+		led-5 {
+			/* SW8-1: ON, SW8-2: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(18, 1) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <5>;
+		};
+
+		led-6 {
+			/* SW5-9: OFF, SW5-10: ON */
+			gpios = <&pinctrl RZT2H_GPIO(22, 7) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <6>;
+		};
+
+		led-7 {
+			/* SW5-7: OFF, SW5-8: ON */
+			gpios = <&pinctrl RZT2H_GPIO(23, 0) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <7>;
+		};
+
+		led-8 {
+			/* SW7-5: OFF, SW7-6: ON */
+			gpios = <&pinctrl RZT2H_GPIO(23, 5) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <8>;
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mdio1_phy {
+	reset-gpios = <&pinctrl RZT2H_GPIO(32, 3) GPIO_ACTIVE_LOW>;
+};
+
+&mdio2_phy {
+	/*
+	 * PHY2 Reset Configuration:
+	 *
+	 * SW6[1] OFF; SW6[2] ON; SW6[3] OFF - use pin P17_5 for GMAC_RESETOUT2#
+	 */
+	reset-gpios = <&pinctrl RZT2H_GPIO(17, 5) GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl {
+	/*
+	 * GMAC2 Pin Configuration:
+	 *
+	 * SW2[6] OFF - connect MDC/MDIO of Ethernet port 2 to GMAC2
+	 * SW2[7] ON - use pins P29_1-P29_7, P30_0-P30_4, and P31_2-P31_5
+	 * for Ethernet port 2
+	 */
+	gmac2_pins: gmac2-pins {
+		pinmux = <RZT2H_PORT_PINMUX(29, 1, 0xf)>, /* ETH2_TXCLK */
+			 <RZT2H_PORT_PINMUX(29, 2, 0xf)>, /* ETH2_TXD0 */
+			 <RZT2H_PORT_PINMUX(29, 3, 0xf)>, /* ETH2_TXD1 */
+			 <RZT2H_PORT_PINMUX(29, 4, 0xf)>, /* ETH2_TXD2 */
+			 <RZT2H_PORT_PINMUX(29, 5, 0xf)>, /* ETH2_TXD3 */
+			 <RZT2H_PORT_PINMUX(29, 6, 0xf)>, /* ETH2_TXEN */
+			 <RZT2H_PORT_PINMUX(29, 7, 0xf)>, /* ETH2_RXCLK */
+			 <RZT2H_PORT_PINMUX(30, 0, 0xf)>, /* ETH2_RXD0 */
+			 <RZT2H_PORT_PINMUX(30, 1, 0xf)>, /* ETH2_RXD1 */
+			 <RZT2H_PORT_PINMUX(30, 2, 0xf)>, /* ETH2_RXD2 */
+			 <RZT2H_PORT_PINMUX(30, 3, 0xf)>, /* ETH2_RXD3 */
+			 <RZT2H_PORT_PINMUX(30, 4, 0xf)>, /* ETH2_RXDV */
+			 <RZT2H_PORT_PINMUX(31, 2, 0xf)>, /* ETH2_TXER */
+			 <RZT2H_PORT_PINMUX(31, 3, 0xf)>, /* ETH2_RXER */
+			 <RZT2H_PORT_PINMUX(31, 4, 0xf)>, /* ETH2_CRS */
+			 <RZT2H_PORT_PINMUX(31, 5, 0xf)>, /* ETH2_COL */
+			 <RZT2H_PORT_PINMUX(30, 5, 0x10)>, /* GMAC2_MDC */
+			 <RZT2H_PORT_PINMUX(30, 6, 0x10)>, /* GMAC2_MDIO */
+			 <RZT2H_PORT_PINMUX(31, 0, 0x2)>; /* ETH2_REFCLK */
+	};
+
+	/*
+	 * GMAC1 Pin Configuration:
+	 *
+	 * SW2[8] ON - use pins P33_2-P33_7, P34_0-P34_5, P34_7 and
+	 * P35_0-P35_2 for Ethernet port 3
+	 */
+	gmac1_pins: gmac1-pins {
+		pinmux = <RZT2H_PORT_PINMUX(33, 2, 0xf)>, /* ETH3_TXCLK */
+			 <RZT2H_PORT_PINMUX(33, 3, 0xf)>, /* ETH3_TXD0 */
+			 <RZT2H_PORT_PINMUX(33, 4, 0xf)>, /* ETH3_TXD1 */
+			 <RZT2H_PORT_PINMUX(33, 5, 0xf)>, /* ETH3_TXD2 */
+			 <RZT2H_PORT_PINMUX(33, 6, 0xf)>, /* ETH3_TXD3 */
+			 <RZT2H_PORT_PINMUX(33, 7, 0xf)>, /* ETH3_TXEN */
+			 <RZT2H_PORT_PINMUX(34, 0, 0xf)>, /* ETH3_RXCLK */
+			 <RZT2H_PORT_PINMUX(34, 1, 0xf)>, /* ETH3_RXD0 */
+			 <RZT2H_PORT_PINMUX(34, 2, 0xf)>, /* ETH3_RXD1 */
+			 <RZT2H_PORT_PINMUX(34, 3, 0xf)>, /* ETH3_RXD2 */
+			 <RZT2H_PORT_PINMUX(34, 4, 0xf)>, /* ETH3_RXD3 */
+			 <RZT2H_PORT_PINMUX(34, 5, 0xf)>, /* ETH3_RXDV */
+			 <RZT2H_PORT_PINMUX(34, 7, 0xf)>, /* ETH3_TXER */
+			 <RZT2H_PORT_PINMUX(35, 0, 0xf)>, /* ETH3_RXER */
+			 <RZT2H_PORT_PINMUX(35, 1, 0xf)>, /* ETH3_CRS */
+			 <RZT2H_PORT_PINMUX(35, 2, 0xf)>, /* ETH3_COL */
+			 <RZT2H_PORT_PINMUX(26, 1, 0x10)>, /* GMAC1_MDC */
+			 <RZT2H_PORT_PINMUX(26, 2, 0x10)>, /* GMAC1_MDIO */
+			 <RZT2H_PORT_PINMUX(34, 6, 0x2)>; /* ETH3_REFCLK */
+	};
+
+	/*
+	 * I2C0 Pin Configuration:
+	 * ------------------------
+	 * Signal | Pin     | SW6
+	 * -------|---------|--------------
+	 * SCL    | P23_3   | 7: ON, 8: OFF
+	 * SDA    | P23_4   | 9: ON, 10: OFF
+	 */
+	i2c0_pins: i2c0-pins {
+		pinmux = <RZT2H_PORT_PINMUX(23, 3, 0x17)>,
+			 <RZT2H_PORT_PINMUX(23, 4, 0x17)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <RZT2H_PORT_PINMUX(5, 0, 0x17)>, /* SDA */
+			 <RZT2H_PORT_PINMUX(4, 7, 0x17)>; /* SCL */
+	};
+
+#if USB_OTG
+	usb-exicen-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(0, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb_exicen_a";
+	};
+#endif
+
+	usb_pins: usb-pins {
+		pinmux = <RZT2H_PORT_PINMUX(0, 0, 0x13)>, /* VBUSEN */
+			 <RZT2H_PORT_PINMUX(0, 1, 0x13)>; /* OVRCUR */
+	};
+};
+
+&adc2 {
+	status = "okay";
+
+	channel@0 {
+		reg = <0x0>;
+	};
+
+	channel@1 {
+		reg = <0x1>;
+	};
+
+	channel@2 {
+		reg = <0x2>;
+	};
+
+	channel@3 {
+		reg = <0x3>;
+	};
+
+	channel@4 {
+		reg = <0x4>;
+	};
+
+	channel@5 {
+		reg = <0x5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi
new file mode 100644
index 000000000000..6f4a11b39d12
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H 4-core SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g077.dtsi"
+
+/ {
+	compatible = "renesas,r9a09g077m44", "renesas,r9a09g077";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087.dtsi b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
new file mode 100644
index 000000000000..361a9235f00d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
@@ -0,0 +1,955 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/N2H SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g087-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r9a09g087";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-level = <3>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sci0: serial@80005000 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x80005000 0 0x400>;
+			interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci1: serial@80005400 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x80005400 0 0x400>;
+			interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 596 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 9>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci2: serial@80005800 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x80005800 0 0x400>;
+			interrupts = <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 600 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 10>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci3: serial@80005c00 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x80005c00 0 0x400>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 11>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci4: serial@80006000 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x80006000 0 0x400>;
+			interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 607 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 608 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 12>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci5: serial@81005000 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x81005000 0 0x400>;
+			interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 611 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 612 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 600>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@80082000 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80082000 0 0x400>,
+			      <0 0x81295100 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@80082400 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80082400 0 0x400>,
+			      <0 0x81295104 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt2: watchdog@80082800 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80082800 0 0x400>,
+			      <0 0x81295108 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt3: watchdog@80082c00 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80082c00 0 0x400>,
+			      <0 0x8129510c 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt4: watchdog@80083000 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80083000 0 0x400>,
+			      <0 0x81295110 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt5: watchdog@80083400 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80083400 0 0x400>,
+			      <0 0x81295114 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@80088000 {
+			compatible = "renesas,riic-r9a09g087", "renesas,riic-r9a09g077";
+			reg = <0 0x80088000 0 0x400>;
+			interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 615 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 616 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 100>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@80088400 {
+			compatible = "renesas,riic-r9a09g087", "renesas,riic-r9a09g077";
+			reg = <0 0x80088400 0 0x400>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 619 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 620 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 621 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 101>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@81008000 {
+			compatible = "renesas,riic-r9a09g087", "renesas,riic-r9a09g077";
+			reg = <0 0x81008000 0 0x400>;
+			interrupts = <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 623 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gmac0: ethernet@80100000 {
+			compatible = "renesas,r9a09g087-gbeth", "renesas,r9a09g077-gbeth",
+				     "snps,dwmac-5.20";
+			reg = <0 0x80100000 0 0x10000>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "rx-queue-4", "rx-queue-5",
+					  "rx-queue-6", "rx-queue-7", "tx-queue-0",
+					  "tx-queue-1", "tx-queue-2", "tx-queue-3",
+					  "tx-queue-4", "tx-queue-5", "tx-queue-6",
+					  "tx-queue-7";
+			clocks = <&cpg CPG_MOD 400>,
+				 <&cpg CPG_CORE R9A09G087_CLK_PCLKH>,
+				 <&cpg CPG_CORE R9A09G087_ETCLKB>;
+			clock-names = "stmmaceth", "pclk", "tx";
+			resets = <&cpg 400>, <&cpg 401>;
+			reset-names = "stmmaceth", "ahb";
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <32>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup0>;
+			snps,mtl-tx-config = <&mtl_tx_setup0>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup0: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+					snps,priority = <0x10>;
+					snps,map-to-dma-channel = <4>;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+					snps,priority = <0x20>;
+					snps,map-to-dma-channel = <5>;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+					snps,priority = <0x40>;
+					snps,map-to-dma-channel = <6>;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+					snps,priority = <0x80>;
+					snps,map-to-dma-channel = <7>;
+				};
+			};
+
+			mtl_tx_setup0: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+
+				queue0 {
+					snps,dcb-algorithm;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac1: ethernet@92000000 {
+			compatible = "renesas,r9a09g087-gbeth", "renesas,r9a09g077-gbeth",
+				     "snps,dwmac-5.20";
+			reg = <0 0x92000000 0 0x10000>;
+			interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 522 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "rx-queue-4", "rx-queue-5",
+					  "rx-queue-6", "rx-queue-7", "tx-queue-0",
+					  "tx-queue-1", "tx-queue-2", "tx-queue-3",
+					  "tx-queue-4", "tx-queue-5", "tx-queue-6",
+					  "tx-queue-7";
+			clocks = <&cpg CPG_MOD 416>,
+				 <&cpg CPG_CORE R9A09G087_CLK_PCLKAH>,
+				 <&cpg CPG_CORE R9A09G087_ETCLKB>;
+			clock-names = "stmmaceth", "pclk", "tx";
+			resets = <&cpg 416>, <&cpg 417>;
+			reset-names = "stmmaceth", "ahb";
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <32>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup1>;
+			snps,mtl-tx-config = <&mtl_tx_setup1>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup1: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+					snps,priority = <0x10>;
+					snps,map-to-dma-channel = <4>;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+					snps,priority = <0x20>;
+					snps,map-to-dma-channel = <5>;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+					snps,priority = <0x40>;
+					snps,map-to-dma-channel = <6>;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+					snps,priority = <0x80>;
+					snps,map-to-dma-channel = <7>;
+				};
+			};
+
+			mtl_tx_setup1: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+
+				queue0 {
+					snps,dcb-algorithm;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac2: ethernet@92010000 {
+			compatible = "renesas,r9a09g087-gbeth", "renesas,r9a09g077-gbeth",
+				     "snps,dwmac-5.20";
+			reg = <0 0x92010000 0 0x10000>;
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
+					  "rx-queue-3", "rx-queue-4", "rx-queue-5",
+					  "rx-queue-6", "rx-queue-7", "tx-queue-0",
+					  "tx-queue-1", "tx-queue-2", "tx-queue-3",
+					  "tx-queue-4", "tx-queue-5", "tx-queue-6",
+					  "tx-queue-7";
+			clocks = <&cpg CPG_MOD 417>,
+				 <&cpg CPG_CORE R9A09G087_CLK_PCLKAH>,
+				 <&cpg CPG_CORE R9A09G087_ETCLKB>;
+			clock-names = "stmmaceth", "pclk", "tx";
+			resets = <&cpg 418>, <&cpg 419>;
+			reset-names = "stmmaceth", "ahb";
+			power-domains = <&cpg>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <32>;
+			rx-fifo-depth = <8192>;
+			tx-fifo-depth = <8192>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup2>;
+			snps,mtl-tx-config = <&mtl_tx_setup2>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			status = "disabled";
+
+			mdio2: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mtl_rx_setup2: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+
+				queue0 {
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+					snps,map-to-dma-channel = <0>;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+					snps,map-to-dma-channel = <1>;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+					snps,priority = <0x4>;
+					snps,map-to-dma-channel = <2>;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+					snps,priority = <0x8>;
+					snps,map-to-dma-channel = <3>;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+					snps,priority = <0x10>;
+					snps,map-to-dma-channel = <4>;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+					snps,priority = <0x20>;
+					snps,map-to-dma-channel = <5>;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+					snps,priority = <0x40>;
+					snps,map-to-dma-channel = <6>;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+					snps,priority = <0x80>;
+					snps,map-to-dma-channel = <7>;
+				};
+			};
+
+			mtl_tx_setup2: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+
+				queue0 {
+					snps,dcb-algorithm;
+				};
+
+				queue1 {
+					snps,dcb-algorithm;
+				};
+
+				queue2 {
+					snps,dcb-algorithm;
+				};
+
+				queue3 {
+					snps,dcb-algorithm;
+				};
+
+				queue4 {
+					snps,dcb-algorithm;
+				};
+
+				queue5 {
+					snps,dcb-algorithm;
+				};
+
+				queue6 {
+					snps,dcb-algorithm;
+				};
+
+				queue7 {
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		ethss: ethss@80110000 {
+			compatible = "renesas,r9a09g087-miic", "renesas,r9a09g077-miic";
+			reg =  <0 0x80110000 0 0x10000>;
+			clocks = <&cpg CPG_CORE R9A09G087_ETCLKE>,
+				 <&cpg CPG_CORE R9A09G087_ETCLKB>,
+				 <&cpg CPG_CORE R9A09G087_ETCLKD>,
+				 <&cpg CPG_MOD 403>;
+			clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
+			resets = <&cpg 405>, <&cpg 406>;
+			reset-names = "rst", "crst";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mii_conv0: mii-conv@0 {
+				reg = <0>;
+				status = "disabled";
+			};
+
+			mii_conv1: mii-conv@1 {
+				reg = <1>;
+				status = "disabled";
+			};
+
+			mii_conv2: mii-conv@2 {
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mii_conv3: mii-conv@3 {
+				reg = <3>;
+				status = "disabled";
+			};
+		};
+
+		cpg: clock-controller@80280000 {
+			compatible = "renesas,r9a09g087-cpg-mssr";
+			reg = <0 0x80280000 0 0x1000>,
+			      <0 0x81280000 0 0x9000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		pinctrl: pinctrl@802c0000 {
+			compatible = "renesas,r9a09g087-pinctrl";
+			reg = <0 0x802c0000 0 0x10000>,
+			      <0 0x812c0000 0 0x10000>,
+			      <0 0x802b0000 0 0x10000>;
+			reg-names = "nsr", "srs", "srn";
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 280>;
+			power-domains = <&cpg>;
+		};
+
+		gic: interrupt-controller@83000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x83000000 0 0x40000>,
+			      <0x0 0x83040000 0 0x160000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		adc0: adc@90014000 {
+			compatible = "renesas,r9a09g087-adc", "renesas,r9a09g077-adc";
+			reg = <0 0x90014000 0 0x400>;
+			interrupts = <GIC_SPI 698 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 699 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 700 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 701 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 851 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 852 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>,
+				 <&cpg CPG_MOD 206>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		adc1: adc@90014400 {
+			compatible = "renesas,r9a09g087-adc", "renesas,r9a09g077-adc";
+			reg = <0 0x90014400 0 0x400>;
+			interrupts = <GIC_SPI 703 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 704 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 705 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 853 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 854 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>,
+				 <&cpg CPG_MOD 207>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		adc2: adc@80008000 {
+			compatible = "renesas,r9a09g087-adc", "renesas,r9a09g077-adc";
+			reg = <0 0x80008000 0 0x400>;
+			interrupts = <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 855 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 856 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "adi", "gbadi", "gcadi",
+					  "cmpai", "cmpbi", "wcmpm", "wcmpum";
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>,
+				 <&cpg CPG_MOD 225>;
+			clock-names = "adclk", "pclk";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		ohci: usb@92040000 {
+			compatible = "generic-ohci";
+			reg = <0 0x92040000 0 0x100>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci: usb@92040100 {
+			compatible = "generic-ehci";
+			reg = <0 0x92040100 0 0x100>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 2>;
+			phy-names = "usb";
+			companion = <&ohci>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy: usb-phy@92040200 {
+			compatible = "renesas,usb2-phy-r9a09g087", "renesas,usb2-phy-r9a09g077";
+			reg = <0 0x92040200 0 0x700>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>,
+				 <&cpg CPG_CORE R9A09G087_USB_CLK>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@92041000 {
+			compatible = "renesas,usbhs-r9a09g087", "renesas,usbhs-r9a09g077";
+			reg = <0 0x92041000 0 0x1000>;
+			interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@92080000  {
+			compatible = "renesas,sdhi-r9a09g087",
+				     "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x92080000 0 0x10000>;
+			interrupts = <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1212>,
+				 <&cpg CPG_CORE R9A09G087_SDHI_CLKHS>;
+			clock-names = "aclk", "clkh";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi0_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI0-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi1: mmc@92090000 {
+			compatible = "renesas,sdhi-r9a09g087",
+				     "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x92090000 0 0x10000>;
+			interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1213>,
+				 <&cpg CPG_CORE R9A09G087_SDHI_CLKHS>;
+			clock-names = "aclk", "clkh";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi1_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI1-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,lpi_en;
+		snps,wr_osr_lmt = <0xf>;
+		snps,rd_osr_lmt = <0xf>;
+		snps,blen = <16 8 4 0 0 0 0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
new file mode 100644
index 000000000000..17c0c79fbd96
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/N2H EVK board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include "r9a09g087m44.dtsi"
+
+/*
+ * SD0 can be connected to either eMMC (U33) or SD card slot CN21
+ * Lets by default enable the eMMC, note we need the below SW settings
+ * for eMMC.
+ * DSW5[1] = ON; DSW5[2] = ON
+ * DSW17[5] = OFF; DSW17[6] = ON
+ *
+ * To enable SD card and disable eMMC on SDHI0 disable the below macro
+ * and set the below switch setting:
+ * DSW5[1] = OFF; DSW5[2] = ON
+ * P22_6 = SD0_WP; DSW15[1] = OFF; DSW15[2] = ON
+ * P22_5 = SD0_CD; DSW15[3] = OFF; DSW15[4] = ON
+ * P02_6 = SD0_IOVS; DSW17[5] = OFF; DSW17[6] = ON
+ * P02_5 = SD0_PWEN; DSW17[7] = OFF; DSW17[8] = ON
+ */
+#define SD0_EMMC       1
+#define SD0_SD		(!SD0_EMMC)
+
+/*
+ * P17_4 = SD1_CD; DSW5[3] = ON; DSW19[1] = OFF; DSW19[2] = ON
+ * P08_6 = SD1_IOVS; DSW5[3] = ON
+ */
+#define SD1_MICRO_SD	1
+
+/*
+ * USB Pin Configuration:
+ *
+ * This board is equipped with three USB connectors: Type-A (CN7), Mini-B
+ * (CN8), and Micro-AB (CN9). The RZ/N2H SoC has a single USB channel, so
+ * either the USB host interface or the USB function interface can be used,
+ * but not both simultaneously when using the CN7 and CN8 connectors.
+ *
+ * By default, the Type-A (CN7) and Mini-B (CN8) connectors are enabled.
+ * Configure the switches as follows:
+ *   - P02_2 - P02_3 (control signals for USB power supply): DSW2[6] = OFF;
+ *     - P02_2 (used for VBUSEN): DSW14[5] = OFF; DSW14[6] = ON
+ *     - P02_3 (used for USB_OVRCUR): DSW14[1] = OFF; DSW14[2] = ON
+ *   - USB_VBUSIN (used for VBUS of CN8): DSW16[1] = OFF; DSW16[2] = ON
+ *   - USB_VBUSEN (used for USB_HF_VBUSEN): DSW16[3] = OFF; DSW16[4] = ON
+ *
+ * To enable the Micro-AB (CN9) USB OTG connector, set the following macro
+ * to 1 and configure the switches as follows:
+ *   - P02_2 - P02_3 (control signals for USB power supply): DSW2[6] = OFF;
+ *     - P02_2 (used for VBUSEN): DSW14[5] = OFF; DSW14[6] = ON
+ *     - P02_3 (used for USB_OVRCUR): DSW14[1] = OFF; DSW14[2] = ON
+ *   - USB_VBUSIN (used for VBUS for OTG): DSW16[1] = ON; DSW16[2] = OFF
+ *   - USB_VBUSEN (used for USB_OTG_VBUSEN): DSW16[3] = ON; DSW16[4] = OFF
+ *   - USB_EXICEN (used for USB OTG EXICEN): DSW14[3] = OFF; DSW14[4] = ON
+ */
+#define USB_OTG		0
+
+#include "rzt2h-n2h-evk-common.dtsi"
+
+/*
+ * I2C0 and LED8/9 share the same pins use the below
+ * macro to choose (and set approopriate DIP switches).
+ */
+#define I2C0	1
+#define LED8	(!I2C0)
+#define LED9	(!I2C0)
+
+/ {
+	model = "Renesas RZ/N2H EVK Board based on r9a09g087m44";
+	compatible = "renesas,rzn2h-evk", "renesas,r9a09g087m44", "renesas,r9a09g087";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-3 {
+			/* DSW18-7: ON, DSW18-8: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(31, 6) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <4>;
+		};
+
+		led-4 {
+			/* DSW18-9: ON, DSW18-10: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(18, 1) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <5>;
+		};
+
+		led-5 {
+			/* DSW18-1: ON, DSW18-2: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(22, 7) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <6>;
+		};
+
+		led-6 {
+			/* DSW18-3: ON, DSW18-4: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(23, 0) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <7>;
+		};
+
+		led-7 {
+			/*
+			 * DSW18-5: ON, DSW18-6: OFF
+			 * DSW19-3: OFF, DSW19-4: ON
+			 */
+			gpios = <&pinctrl RZT2H_GPIO(14, 3) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <8>;
+		};
+
+#if LED8
+		led-8 {
+			/*
+			 * USER_LED0
+			 * DSW15-8: OFF, DSW15-9: OFF, DSW15-10: ON
+			 */
+			gpios = <&pinctrl RZT2H_GPIO(14, 6) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <0>;
+		};
+#endif
+
+#if LED9
+		led-9 {
+			/*
+			 * USER_LED1
+			 * DSW15-5: OFF, DSW15-6: ON
+			 */
+			gpios = <&pinctrl RZT2H_GPIO(14, 7) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+		};
+#endif
+
+		led-10 {
+			/*
+			 * USER_LED2
+			 * DSW17-3: OFF, DSW17-4: ON
+			 */
+			gpios = <&pinctrl RZT2H_GPIO(2, 7) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+		};
+
+		led-11 {
+			/*
+			 * USER_LED3
+			 * DSW17-1: OFF, DSW17-2: ON
+			 */
+			gpios = <&pinctrl RZT2H_GPIO(3, 0) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <3>;
+		};
+	};
+};
+
+#if I2C0
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+#endif
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mdio1_phy {
+	/*
+	 * PHY3 Reset Configuration:
+	 *
+	 * DSW12[5] OFF; DSW12[6] ON - use pin P03_2 for GMAC_RESETOUT3#
+	 */
+	reset-gpios = <&pinctrl RZT2H_GPIO(3, 2) GPIO_ACTIVE_LOW>;
+};
+
+&mdio2_phy {
+	/*
+	 * PHY2 Reset Configuration:
+	 *
+	 * DSW8[1] ON; DSW8[2] OFF; DSW12[7] OFF; DSW12[8] ON - use pin
+	 * P03_1 for GMAC_RESETOUT2#
+	 */
+	reset-gpios = <&pinctrl RZT2H_GPIO(3, 1) GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl {
+	/*
+	 * GMAC2 Pin Configuration:
+	 *
+	 * DSW5[6] OFF - connect MDC/MDIO of Ethernet port 2 to GMAC2
+	 * DSW5[7] ON - use pins P29_1-P29_7, P30_0-P30_4, P30_7,
+	 * P31_2, P31_4 and P31_5 are used for Ethernet port 2
+	 */
+	gmac2_pins: gmac2-pins {
+		pinmux = <RZT2H_PORT_PINMUX(29, 1, 0xf)>, /* ETH2_TXCLK */
+			 <RZT2H_PORT_PINMUX(29, 2, 0xf)>, /* ETH2_TXD0 */
+			 <RZT2H_PORT_PINMUX(29, 3, 0xf)>, /* ETH2_TXD1 */
+			 <RZT2H_PORT_PINMUX(29, 4, 0xf)>, /* ETH2_TXD2 */
+			 <RZT2H_PORT_PINMUX(29, 5, 0xf)>, /* ETH2_TXD3 */
+			 <RZT2H_PORT_PINMUX(29, 6, 0xf)>, /* ETH2_TXEN */
+			 <RZT2H_PORT_PINMUX(29, 7, 0xf)>, /* ETH2_RXCLK */
+			 <RZT2H_PORT_PINMUX(30, 0, 0xf)>, /* ETH2_RXD0 */
+			 <RZT2H_PORT_PINMUX(30, 1, 0xf)>, /* ETH2_RXD1 */
+			 <RZT2H_PORT_PINMUX(30, 2, 0xf)>, /* ETH2_RXD2 */
+			 <RZT2H_PORT_PINMUX(30, 3, 0xf)>, /* ETH2_RXD3 */
+			 <RZT2H_PORT_PINMUX(30, 4, 0xf)>, /* ETH2_RXDV */
+			 <RZT2H_PORT_PINMUX(31, 2, 0xf)>, /* ETH2_TXER */
+			 <RZT2H_PORT_PINMUX(31, 1, 0xf)>, /* ETH2_RXER */
+			 <RZT2H_PORT_PINMUX(31, 4, 0xf)>, /* ETH2_CRS */
+			 <RZT2H_PORT_PINMUX(31, 5, 0xf)>, /* ETH2_COL */
+			 <RZT2H_PORT_PINMUX(30, 5, 0x10)>, /* GMAC2_MDC */
+			 <RZT2H_PORT_PINMUX(30, 6, 0x10)>, /* GMAC2_MDIO */
+			 <RZT2H_PORT_PINMUX(31, 0, 0x2)>; /* ETH2_REFCLK */
+
+	};
+
+	/*
+	 * GMAC2 Pin Configuration:
+	 *
+	 * DSW5[8] ON - use pins P00_0-P00_2, P33_2-P33_7, P34_0-P34_6
+	 * for Ethernet port 3
+	 * DSW12[1] OFF; DSW12[2] ON - use pin P00_3 for Ethernet port 3
+	 */
+	gmac1_pins: gmac1-pins {
+		pinmux = <RZT2H_PORT_PINMUX(33, 2, 0xf)>, /* ETH3_TXCLK */
+			 <RZT2H_PORT_PINMUX(33, 3, 0xf)>, /* ETH3_TXD0 */
+			 <RZT2H_PORT_PINMUX(33, 4, 0xf)>, /* ETH3_TXD0 */
+			 <RZT2H_PORT_PINMUX(33, 5, 0xf)>, /* ETH3_TXD2 */
+			 <RZT2H_PORT_PINMUX(33, 6, 0xf)>, /* ETH3_TXD3 */
+			 <RZT2H_PORT_PINMUX(33, 7, 0xf)>, /* ETH3_TXEN */
+			 <RZT2H_PORT_PINMUX(34, 0, 0xf)>, /* ETH3_RXCLK */
+			 <RZT2H_PORT_PINMUX(34, 1, 0xf)>, /* ETH3_RXD0 */
+			 <RZT2H_PORT_PINMUX(34, 2, 0xf)>, /* ETH3_RXD1 */
+			 <RZT2H_PORT_PINMUX(34, 3, 0xf)>, /* ETH3_RXD2 */
+			 <RZT2H_PORT_PINMUX(34, 4, 0xf)>, /* ETH3_RXD3 */
+			 <RZT2H_PORT_PINMUX(34, 5, 0xf)>, /* ETH3_RXDV */
+			 <RZT2H_PORT_PINMUX(0, 0, 0xf)>, /* ETH3_TXER */
+			 <RZT2H_PORT_PINMUX(0, 1, 0xf)>, /* ETH3_RXER */
+			 <RZT2H_PORT_PINMUX(0, 2, 0xf)>, /* ETH3_CRS */
+			 <RZT2H_PORT_PINMUX(0, 3, 0xf)>, /* ETH3_COL */
+			 <RZT2H_PORT_PINMUX(26, 1, 0x10)>, /* GMAC1_MDC */
+			 <RZT2H_PORT_PINMUX(26, 2, 0x10)>, /* GMAC1_MDIO */
+			 <RZT2H_PORT_PINMUX(34, 6, 0x2)>; /* ETH3_REFCLK */
+	};
+
+	/*
+	 * I2C0 Pin Configuration:
+	 * ------------------------
+	 * Signal | Pin     | DSW15
+	 * -------|---------|--------------
+	 * SCL    | P14_6   | 8: OFF, 9: ON, 10: OFF
+	 * SDA    | P14_7   | 5: ON, 6: OFF
+	 */
+	i2c0_pins: i2c0-pins {
+		pinmux = <RZT2H_PORT_PINMUX(14, 6, 0x17)>,
+			 <RZT2H_PORT_PINMUX(14, 7, 0x17)>;
+	};
+
+	/*
+	 * I2C1 Pin Configuration:
+	 * ------------------------
+	 * Signal | Pin     | DSW7
+	 * -------|---------|--------------
+	 * SCL    | P03_3   | 1: ON, 2: OFF
+	 * SDA    | P03_4   | 3: ON, 4: OFF
+	 */
+	i2c1_pins: i2c1-pins {
+		pinmux = <RZT2H_PORT_PINMUX(3, 3, 0x17)>,
+			 <RZT2H_PORT_PINMUX(3, 4, 0x17)>;
+	};
+
+#if USB_OTG
+	usb-exicen-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(2, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb_exicen_a";
+	};
+#endif
+
+	usb_pins: usb-pins {
+		pinmux = <RZT2H_PORT_PINMUX(2, 2, 0x13)>, /* VBUSEN */
+			 <RZT2H_PORT_PINMUX(2, 3, 0x13)>; /* OVRCUR */
+	};
+};
+
+&adc2 {
+	status = "okay";
+
+	channel@0 {
+		reg = <0x0>;
+	};
+
+	channel@1 {
+		reg = <0x1>;
+	};
+
+	channel@2 {
+		reg = <0x2>;
+	};
+
+	channel@3 {
+		reg = <0x3>;
+	};
+
+	channel@4 {
+		reg = <0x4>;
+	};
+
+	channel@5 {
+		reg = <0x5>;
+	};
+
+	channel@6 {
+		reg = <0x6>;
+	};
+
+	channel@7 {
+		reg = <0x7>;
+	};
+
+	channel@8 {
+		reg = <0x8>;
+	};
+
+	channel@9 {
+		reg = <0x9>;
+	};
+
+	channel@a {
+		reg = <0xa>;
+	};
+
+	channel@b {
+		reg = <0xb>;
+	};
+
+	channel@c {
+		reg = <0xc>;
+	};
+
+	channel@d {
+		reg = <0xd>;
+	};
+
+	channel@e {
+		reg = <0xe>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44.dtsi b/arch/arm64/boot/dts/renesas/r9a09g087m44.dtsi
new file mode 100644
index 000000000000..ef0343b53309
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g087m44.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/N2H 4-core SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g087.dtsi"
+
+/ {
+	compatible = "renesas,r9a09g087m44", "renesas,r9a09g087";
+};
diff --git a/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi b/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
new file mode 100644
index 000000000000..58561da3007a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ SMARC Carrier-II Board.
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+/*
+ * Please set the switch position SW_OPT_MUX.1 on the carrier board and the
+ * corresponding macro SW_SDIO_M2E on the board DTS:
+ *
+ * SW_SDIO_M2E:
+ *     0 - SMARC SDIO signal is connected to uSD1
+ *     1 - SMARC SDIO signal is connected to M.2 Key E connector
+ *
+ * Please set the switch position SW_GPIO_CAN_PMOD on the carrier board and the
+ * corresponding macro SW_GPIO8_CAN0_STB/SW_GPIO8_CAN0_STB on the board DTS:
+ *
+ * SW_GPIO8_CAN0_STB:
+ *	0 - Connect to GPIO8 PMOD (default)
+ *	1 - Connect to CAN0 transceiver STB pin
+ *
+ * SW_GPIO9_CAN1_STB:
+ *	0 - Connect to GPIO9 PMOD (default)
+ *	1 - Connect to CAN1 transceiver STB pin
+ *
+ * GPIO keys are enabled by default. Use PMOD_GPIO macros to disable them
+ * if needed.
+ */
+
+/ {
+	model = "Renesas RZ SMARC Carrier-II Board";
+	compatible = "renesas,smarc2-evk";
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial3:115200n8";
+	};
+
+	aliases {
+		i2c0 = &i2c0;
+		serial3 = &scif0;
+		mmc1 = &sdhi1;
+	};
+
+	can_transceiver0: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		status = "disabled";
+	};
+
+	can_transceiver1: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		status = "disabled";
+	};
+
+	keys: keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			interrupts-extended = <&pinctrl KEY_1_GPIO IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_1>;
+			label = "USER_SW1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-2 {
+			interrupts-extended = <&pinctrl KEY_2_GPIO IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_2>;
+			label = "USER_SW2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-3 {
+			interrupts-extended = <&pinctrl KEY_3_GPIO IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_3>;
+			label = "USER_SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+};
+
+&canfd {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&scif0 {
+	status = "okay";
+};
+
+&sdhi1 {
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi
index c5bb63c63b47..4d2b0655859a 100644
--- a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi
@@ -64,7 +64,6 @@
 		compatible = "ovti,ov5645";
 		reg = <0x3c>;
 		clocks = <&ov5645_fixed_clk>;
-		clock-frequency = <24000000>;
 		vdddo-supply = <&ov5645_vdddo_1v8>;
 		vdda-supply = <&ov5645_vdda_2v8>;
 		vddd-supply = <&ov5645_vddd_1v5>;
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
index e9f244c33d55..2616dbde4dd5 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
@@ -38,6 +38,11 @@
 		line-name = "can1_stb";
 	};
 
+	gpt_pins: gpt {
+		pinmux = <RZG2L_PORT_PINMUX(43, 0, 2)>, /* GTIOC4A */
+			 <RZG2L_PORT_PINMUX(43, 1, 2)>; /* GTIOC4B */
+	};
+
 	i2c0_pins: i2c0 {
 		pins = "RIIC0_SDA", "RIIC0_SCL";
 		input-enable;
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 21cf198b3c17..d511e152d7c6 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -327,7 +327,7 @@
 	status = "okay";
 
 	flash@0 {
-		compatible = "micron,mt25qu512a", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 789f7b0b5ebc..b76b55e7f09d 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -104,6 +104,14 @@
 	};
 };
 
+#if PMOD0_GPT
+&gpt {
+	pinctrl-0 = <&gpt_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+#endif /* PMOD0_GPT */
+
 &i2c3 {
 	pinctrl-0 = <&i2c3_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index 9aa729fbdce0..3e8909a872e3 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -246,7 +246,7 @@
 	status = "okay";
 
 	flash@0 {
-		compatible = "micron,mt25qu512a", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index 345b779e4f60..f3d7eff0d2f2 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -48,7 +48,10 @@
 #if (SW_SCIF_CAN || SW_RSPI_CAN)
 &canfd {
 	pinctrl-0 = <&can1_pins>;
-	/delete-node/ channel@0;
+
+	channel0 {
+		status = "disabled";
+	};
 };
 #else
 &canfd {
diff --git a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
new file mode 100644
index 000000000000..7faa44510d98
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R9A09G047E57 SMARC SoM board.
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+/*
+ * Please set the below switch position on the SoM and the corresponding macro
+ * on the board DTS:
+ *
+ * Switch position SYS.1, Macro SW_SD0_DEV_SEL:
+ *      0 - SD0 is connected to eMMC (default)
+ *      1 - SD0 is connected to uSD0 card
+ *
+ * Switch position SYS.5, Macro SW_LCD_EN:
+ *      0 - Select Misc. Signals routing
+ *      1 - Select LCD
+ *
+ * Switch position BOOT.6, Macro SW_PDM_EN:
+ *      0 - Select CAN routing
+ *      1 - Select PDM
+ */
+
+/ {
+	compatible = "renesas,rzg3e-smarcm", "renesas,r9a09g047e57", "renesas,r9a09g047";
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		i2c2 = &i2c2;
+		mmc0 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* First 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0xf8000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vdd0p8v_others: regulator-vdd0p8v-others {
+		compatible = "regulator-fixed";
+
+		regulator-name = "fixed-0.8V";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* 32.768kHz crystal */
+	x3: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&audio_extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&eth1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&reg_vdd0p8v_others>;
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+
+	raa215300: pmic@12 {
+		compatible = "renesas,raa215300";
+		reg = <0x12>, <0x6f>;
+		reg-names = "main", "rtc";
+		clocks = <&x3>;
+		clock-names = "xin";
+
+		pinctrl-0 = <&rtc_irq_pin>;
+		pinctrl-names = "default";
+
+		interrupts-extended = <&pinctrl RZG3E_GPIO(S, 1) IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupts-extended = <&icu 3 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <1400>;
+		txc-skew-psec = <1400>;
+		rxdv-skew-psec = <0>;
+		txdv-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&mdio1 {
+	phy1: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupts-extended = <&icu 16 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <1400>;
+		txc-skew-psec = <1400>;
+		rxdv-skew-psec = <0>;
+		txdv-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&pinctrl {
+	eth0_pins: eth0 {
+		clk {
+			pinmux = <RZG3E_PORT_PINMUX(B, 1, 1)>; /* TXC */
+			output-enable;
+		};
+
+		ctrl {
+			pinmux = <RZG3E_PORT_PINMUX(A, 1, 1)>, /* MDC */
+				 <RZG3E_PORT_PINMUX(A, 0, 1)>, /* MDIO */
+				 <RZG3E_PORT_PINMUX(C, 2, 15)>, /* PHY_INTR (IRQ2) */
+				 <RZG3E_PORT_PINMUX(C, 1, 1)>, /* RXD3 */
+				 <RZG3E_PORT_PINMUX(C, 0, 1)>, /* RXD2 */
+				 <RZG3E_PORT_PINMUX(B, 7, 1)>, /* RXD1 */
+				 <RZG3E_PORT_PINMUX(B, 6, 1)>, /* RXD0 */
+				 <RZG3E_PORT_PINMUX(B, 0, 1)>, /* RXC */
+				 <RZG3E_PORT_PINMUX(A, 2, 1)>, /* RX_CTL */
+				 <RZG3E_PORT_PINMUX(B, 5, 1)>, /* TXD3 */
+				 <RZG3E_PORT_PINMUX(B, 4, 1)>, /* TXD2 */
+				 <RZG3E_PORT_PINMUX(B, 3, 1)>, /* TXD1 */
+				 <RZG3E_PORT_PINMUX(B, 2, 1)>, /* TXD0 */
+				 <RZG3E_PORT_PINMUX(A, 3, 1)>; /* TX_CTL */
+		};
+	};
+
+	eth1_pins: eth1 {
+		clk {
+			pinmux = <RZG3E_PORT_PINMUX(E, 1, 1)>; /* TXC */
+			output-enable;
+		};
+
+		ctrl {
+
+			pinmux = <RZG3E_PORT_PINMUX(D, 1, 1)>, /* MDC */
+				 <RZG3E_PORT_PINMUX(D, 0, 1)>, /* MDIO */
+				 <RZG3E_PORT_PINMUX(F, 2, 15)>, /* PHY_INTR (IRQ15) */
+				 <RZG3E_PORT_PINMUX(F, 1, 1)>, /* RXD3 */
+				 <RZG3E_PORT_PINMUX(F, 0, 1)>, /* RXD2 */
+				 <RZG3E_PORT_PINMUX(E, 7, 1)>, /* RXD1 */
+				 <RZG3E_PORT_PINMUX(E, 6, 1)>, /* RXD0 */
+				 <RZG3E_PORT_PINMUX(E, 0, 1)>, /* RXC */
+				 <RZG3E_PORT_PINMUX(D, 2, 1)>, /* RX_CTL */
+				 <RZG3E_PORT_PINMUX(E, 5, 1)>, /* TXD3 */
+				 <RZG3E_PORT_PINMUX(E, 4, 1)>, /* TXD2 */
+				 <RZG3E_PORT_PINMUX(E, 3, 1)>, /* TXD1 */
+				 <RZG3E_PORT_PINMUX(E, 2, 1)>, /* TXD0 */
+				 <RZG3E_PORT_PINMUX(D, 3, 1)>; /* TX_CTL */
+		};
+	};
+
+	i2c2_pins: i2c {
+		pinmux = <RZG3E_PORT_PINMUX(3, 4, 1)>, /* SCL2 */
+			 <RZG3E_PORT_PINMUX(3, 5, 1)>; /* SDA2 */
+	};
+
+	rtc_irq_pin: rtc-irq {
+		pins = "PS1";
+		bias-pull-up;
+	};
+
+	sdhi0_emmc_pins: sd0-emmc {
+		sd0-ctrl {
+			pins = "SD0CLK", "SD0CMD";
+			renesas,output-impedance = <3>;
+		};
+
+		sd0-data {
+			pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3",
+			       "SD0DAT4", "SD0DAT5", "SD0DAT6", "SD0DAT7";
+			renesas,output-impedance = <3>;
+		};
+
+		sd0-rst {
+			pins = "SD0RSTN";
+			renesas,output-impedance = <3>;
+		};
+	};
+
+	sdhi0_usd_pins: sd0-usd {
+		sd0-cd {
+			pinmux = <RZG3E_PORT_PINMUX(5, 0, 8)>;
+		};
+
+		sd0-ctrl {
+			pins = "SD0CLK", "SD0CMD";
+			renesas,output-impedance = <3>;
+		};
+
+		sd0-data {
+			pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3";
+			renesas,output-impedance = <3>;
+		};
+
+		sd0-iovs {
+			pins = "SD0IOVS";
+			renesas,output-impedance = <3>;
+		};
+
+		sd0-pwen {
+			pins = "SD0PWEN";
+			renesas,output-impedance = <3>;
+		};
+	};
+
+	sdhi2_pins: sd2 {
+		sd2-cd {
+			pinmux = <RZG3E_PORT_PINMUX(K, 0, 1)>; /* SD2CD */
+		};
+
+		sd2-ctrl {
+			pinmux = <RZG3E_PORT_PINMUX(H, 0, 1)>, /* SD2CLK */
+				 <RZG3E_PORT_PINMUX(H, 1, 1)>; /* SD2CMD */
+		};
+
+		sd2-data {
+			pinmux = <RZG3E_PORT_PINMUX(H, 2, 1)>, /* SD2DAT0 */
+				 <RZG3E_PORT_PINMUX(H, 3, 1)>, /* SD2DAT1 */
+				 <RZG3E_PORT_PINMUX(H, 4, 1)>, /* SD2DAT2 */
+				 <RZG3E_PORT_PINMUX(H, 5, 1)>; /* SD2DAT3 */
+		};
+
+		sd2-iovs {
+			pinmux = <RZG3E_PORT_PINMUX(K, 1, 1)>; /* SD2IOVS */
+		};
+
+		sd2-pwen {
+			pinmux = <RZG3E_PORT_PINMUX(K, 2, 1)>; /* SD2PWEN */
+		};
+	};
+
+	xspi_pins: xspi0 {
+		pinmux = <RZG3E_PORT_PINMUX(M, 0, 0)>, /* XSPI0_IO0 */
+			 <RZG3E_PORT_PINMUX(M, 1, 0)>, /* XSPI0_IO1 */
+			 <RZG3E_PORT_PINMUX(M, 2, 0)>, /* XSPI0_IO2 */
+			 <RZG3E_PORT_PINMUX(M, 3, 0)>, /* XSPI0_IO3 */
+			 <RZG3E_PORT_PINMUX(L, 0, 0)>, /* XSPI0_CKP */
+			 <RZG3E_PORT_PINMUX(L, 1, 0)>; /* XSPI0_CS0 */
+	};
+};
+
+&qextal_clk {
+	clock-frequency = <24000000>;
+};
+
+&rtxin_clk {
+	clock-frequency = <32768>;
+};
+
+#if (SW_SD0_DEV_SEL)
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_usd_pins>;
+	pinctrl-1 = <&sdhi0_usd_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&sdhi0_vqmmc>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi0_vqmmc {
+	status = "okay";
+};
+#else
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#endif
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&sdhi2_vqmmc>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2_vqmmc {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&xspi {
+	pinctrl-0 = <&xspi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		vcc-supply = <&reg_1p8v>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x00000000 0x00060000>;
+			};
+
+			partition@60000 {
+				label = "fip";
+				reg = <0x00060000 0x007a0000>;
+			};
+
+			partition@800000 {
+				label = "user";
+				reg = <0x800000 0x800000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index 2ed01d391554..6f25ab617982 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -9,25 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
-/*
- * On-board switches' states:
- * @SW_OFF: switch's state is OFF
- * @SW_ON:  switch's state is ON
- */
-#define SW_OFF		0
-#define SW_ON		1
-
-/*
- * SW_CONFIG[x] switches' states:
- * @SW_CONFIG2:
- *	SW_OFF - SD0 is connected to eMMC
- *	SW_ON  - SD0 is connected to uSD0 card
- * @SW_CONFIG3:
- *	SW_OFF - SD2 is connected to SoC
- *	SW_ON  - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
- */
-#define SW_CONFIG2	SW_OFF
-#define SW_CONFIG3	SW_ON
+#include "rzg3s-smarc-switches.h"
 
 / {
 	compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045";
@@ -43,11 +25,6 @@
 #endif
 	};
 
-	chosen {
-		bootargs = "ignore_loglevel";
-		stdout-path = "serial0:115200n8";
-	};
-
 	memory@48000000 {
 		device_type = "memory";
 		/* First 128MB is reserved for secure area. */
@@ -63,7 +40,6 @@
 		enable-active-high;
 	};
 
-#if SW_CONFIG2 == SW_ON
 	vccq_sdhi0: regulator1 {
 		compatible = "regulator-gpio";
 		regulator-name = "SDHI0 VccQ";
@@ -73,8 +49,8 @@
 		gpios-states = <1>;
 		states = <3300000 1>, <1800000 0>;
 	};
-#else
-	reg_1p8v: regulator1 {
+
+	reg_1p8v: regulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
 		regulator-min-microvolt = <1800000>;
@@ -82,9 +58,17 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
-#endif
 
-	vcc_sdhi2: regulator2 {
+	reg_3p3v: regulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi2: regulator4 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHI2 Vcc";
 		regulator-min-microvolt = <3300000>;
@@ -92,6 +76,12 @@
 		gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 #if SW_CONFIG3 == SW_ON
@@ -152,6 +142,30 @@
 
 &i2c1 {
 	status = "okay";
+
+	versa3: clock-generator@68 {
+		compatible = "renesas,5l35023";
+		reg = <0x68>;
+		clocks = <&x3_clk>;
+		#clock-cells = <1>;
+		assigned-clocks = <&versa3 0>,
+				  <&versa3 1>,
+				  <&versa3 2>,
+				  <&versa3 3>,
+				  <&versa3 4>,
+				  <&versa3 5>;
+		assigned-clock-rates = <24000000>,
+				       <12288000>,
+				       <11289600>,
+				       <25000000>,
+				       <100000000>,
+				       <100000000>;
+		renesas,settings = [
+		  80 00 11 19 4c 42 dc 2f 06 7d 20 1a 5f 1e f2 27
+		  00 40 00 00 00 00 00 00 06 0c 19 02 3f f0 90 86
+		  a0 80 30 30 9c
+		];
+	};
 };
 
 #if SW_CONFIG2 == SW_ON
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-switches.h b/arch/arm64/boot/dts/renesas/rzg3s-smarc-switches.h
new file mode 100644
index 000000000000..bbf908a5322c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-switches.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * On-board switches for the Renesas RZ/G3S SMARC Module and RZ SMARC Carrier II
+ * boards.
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+#ifndef __RZG3S_SMARC_SWITCHES_H__
+#define __RZG3S_SMARC_SWITCHES_H__
+
+/*
+ * On-board switches' states:
+ * @SW_OFF: switch's state is OFF
+ * @SW_ON:  switch's state is ON
+ */
+#define SW_OFF		0
+#define SW_ON		1
+
+/*
+ * SW_CONFIG[x] switches' states:
+ * @SW_CONFIG2:
+ *	SW_OFF - SD0 is connected to eMMC
+ *	SW_ON  - SD0 is connected to uSD0 card
+ * @SW_CONFIG3:
+ *	SW_OFF - SD2 is connected to SoC
+ *	SW_ON  - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
+ */
+#define SW_CONFIG2	SW_OFF
+#define SW_CONFIG3	SW_ON
+
+/*
+ * SW_OPT_MUX[x] switches' states:
+ * @SW_OPT_MUX4:
+ *	SW_OFF - The SMARC SER0 signals are routed to M.2 Key E UART
+ *	SW_ON  - The SMARC SER0 signals are routed to PMOD1
+ */
+#define SW_OPT_MUX4	SW_ON
+
+#endif /* __RZG3S_SMARC_SWITCHES_H__ */
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
index 4509151344c4..6b0bb2c441af 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
@@ -12,10 +12,17 @@
 / {
 	aliases {
 		i2c0 = &i2c0;
-		serial0 = &scif0;
+		serial0 = &scif1;
+		serial1 = &scif3;
+		serial3 = &scif0;
 		mmc1 = &sdhi1;
 	};
 
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial3:115200n8";
+	};
+
 	keys {
 		compatible = "gpio-keys";
 
@@ -44,6 +51,23 @@
 		};
 	};
 
+	snd_rzg3s: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,mclk-fs = <256>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&da7212>;
+			clocks = <&versa3 1>;
+		};
+	};
+
 	vcc_sdhi1: regulator-vcc-sdhi1 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHI1 Vcc";
@@ -64,13 +88,83 @@
 	};
 };
 
+&audio_clk2 {
+	clock-frequency = <12288000>;
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
 	clock-frequency = <1000000>;
+
+	da7212: codec@1a {
+		compatible = "dlg,da7212";
+		reg = <0x1a>;
+
+		clocks = <&versa3 1>;
+		clock-names = "mclk";
+
+		#sound-dai-cells = <0>;
+
+		dlg,micbias1-lvl = <2500>;
+		dlg,micbias2-lvl = <2500>;
+		dlg,dmic-data-sel = "lrise_rfall";
+		dlg,dmic-samplephase = "between_clkedge";
+		dlg,dmic-clkrate = <3000000>;
+
+		VDDA-supply = <&reg_1p8v>;
+		VDDSP-supply = <&reg_3p3v>;
+		VDDMIC-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	power-monitor@44 {
+		compatible = "renesas,isl28022";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <8000>;
+		renesas,average-samples = <32>;
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&phyrst {
+	status = "okay";
 };
 
 &pinctrl {
+	audio_clock_pins: audio-clock {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+
 	key-1-gpio-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(18, 0) GPIO_ACTIVE_LOW>;
@@ -97,6 +191,11 @@
 			 <RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */
 	};
 
+	scif3_pins: scif3 {
+		pinmux = <RZG2L_PORT_PINMUX(17, 2, 7)>, /* RXD */
+			 <RZG2L_PORT_PINMUX(17, 3, 7)>; /* TXD */
+	};
+
 	sdhi1_pins: sd1 {
 		data {
 			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
@@ -128,6 +227,30 @@
 			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
 		};
 	};
+
+	ssi3_pins: ssi3 {
+		pinmux = <RZG2L_PORT_PINMUX(18, 2, 8)>, /* BCK */
+			 <RZG2L_PORT_PINMUX(18, 3, 8)>, /* RCK */
+			 <RZG2L_PORT_PINMUX(18, 4, 8)>, /* TXD */
+			 <RZG2L_PORT_PINMUX(18, 5, 8)>; /* RXD */
+	};
+
+	usb0_pins: usb0 {
+		peri {
+			pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */
+				 <RZG2L_PORT_PINMUX(5, 2, 1)>; /* OVC */
+		};
+
+		otg {
+			pinmux = <RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */
+			bias-pull-up;
+		};
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */
+	};
 };
 
 &scif0 {
@@ -136,6 +259,12 @@
 	status = "okay";
 };
 
+&scif3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif3_pins>;
+	status = "okay";
+};
+
 &sdhi1 {
 	pinctrl-0 = <&sdhi1_pins>;
 	pinctrl-1 = <&sdhi1_pins_uhs>;
@@ -148,3 +277,25 @@
 	max-frequency = <125000000>;
 	status = "okay";
 };
+
+&ssi3 {
+	clocks = <&cpg CPG_MOD R9A08G045_SSI3_PCLK2>,
+		 <&cpg CPG_MOD R9A08G045_SSI3_PCLK_SFR>,
+		 <&versa3 2>, <&audio_clk2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssi3_pins>, <&audio_clock_pins>;
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	vbus-supply = <&usb0_vbus_otg>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
new file mode 100644
index 000000000000..3eed1f3948e8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
@@ -0,0 +1,395 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Common Device Tree Source for the RZ/T2H and RZ/N2H EVK boards.
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/mscc-phy-vsc8531.h>
+#include <dt-bindings/net/renesas,r9a09g077-pcs-miic.h>
+#include <dt-bindings/pinctrl/renesas,r9a09g077-pinctrl.h>
+
+/ {
+	aliases {
+		ethernet3 = &gmac1;
+		ethernet2 = &gmac2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		serial0 = &sci0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+#if SD0_SD
+	vqmmc_sdhi0: regulator-vqmmc-sdhi0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI0 VqmmC";
+		gpios = <&pinctrl RZT2H_GPIO(2, 6) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+#endif
+
+#if SD1_MICRO_SD
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZT2H_GPIO(8, 6) GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+#endif
+};
+
+&ehci {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ethss {
+	status = "okay";
+
+	renesas,miic-switch-portin = <ETHSS_GMAC0_PORT>;
+};
+
+&extal_clk {
+	clock-frequency = <25000000>;
+};
+
+&gmac1 {
+	pinctrl-0 = <&gmac1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&mdio1_phy>;
+	phy-mode = "rgmii-id";
+	pcs-handle = <&mii_conv3>;
+	status = "okay";
+};
+
+&gmac2 {
+	pinctrl-0 = <&gmac2_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&mdio2_phy>;
+	phy-mode = "rgmii-id";
+	pcs-handle = <&mii_conv2>;
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "renesas,r1ex24016", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&mdio1 {
+	mdio1_phy: ethernet-phy@3 {
+		compatible = "ethernet-phy-id0007.0772", "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		vsc8531,led-0-mode = <VSC8531_ACTIVITY>;
+		vsc8531,led-1-mode = <VSC8531_LINK_ACTIVITY>;
+		reset-assert-us = <2000>;
+		reset-deassert-us = <15000>;
+	};
+};
+
+&mdio2 {
+	mdio2_phy: ethernet-phy@2 {
+		compatible = "ethernet-phy-id0007.0772", "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+		vsc8531,led-0-mode = <VSC8531_ACTIVITY>;
+		vsc8531,led-1-mode = <VSC8531_LINK_ACTIVITY>;
+		reset-assert-us = <2000>;
+		reset-deassert-us = <15000>;
+	};
+};
+
+&mii_conv0 {
+	renesas,miic-input = <ETHSS_ETHSW_PORT0>;
+	status = "okay";
+};
+
+&mii_conv1 {
+	renesas,miic-input = <ETHSS_ETHSW_PORT1>;
+	status = "okay";
+};
+
+&mii_conv2 {
+	renesas,miic-input = <ETHSS_GMAC2_PORT>;
+	status = "okay";
+};
+
+&mii_conv3 {
+	renesas,miic-input = <ETHSS_GMAC1_PORT>;
+	status = "okay";
+};
+
+&ohci {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&pinctrl {
+	/*
+	 * SCI0 Pin Configuration:
+	 * ------------------------
+	 * Signal     | Pin     | RZ/T2H (SW4) | RZ/N2H (DSW9)
+	 * -----------|---------|--------------|---------------
+	 * SCI0_RXD   | P27_4   | 5: ON, 6: OFF| 1: ON, 2: OFF
+	 * SCI0_TXD   | P27_5   | 7: ON, 8: OFF| 3: ON, 4: OFF
+	 */
+	sci0_pins: sci0-pins {
+		pinmux = <RZT2H_PORT_PINMUX(27, 4, 0x14)>,
+			 <RZT2H_PORT_PINMUX(27, 5, 0x14)>;
+	};
+
+#if SD0_EMMC
+	sdhi0-emmc-iovs-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(2, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SD0_IOVS";
+	};
+#endif
+
+	sdhi0_emmc_pins: sd0-emmc-group {
+		data-pins {
+			pinmux = <RZT2H_PORT_PINMUX(12, 2, 0x29)>, /* SD0_DATA0 */
+				 <RZT2H_PORT_PINMUX(12, 3, 0x29)>, /* SD0_DATA1 */
+				 <RZT2H_PORT_PINMUX(12, 4, 0x29)>, /* SD0_DATA2 */
+				 <RZT2H_PORT_PINMUX(12, 5, 0x29)>, /* SD0_DATA3 */
+				 <RZT2H_PORT_PINMUX(12, 6, 0x29)>, /* SD0_DATA4 */
+				 <RZT2H_PORT_PINMUX(12, 7, 0x29)>, /* SD0_DATA5 */
+				 <RZT2H_PORT_PINMUX(13, 0, 0x29)>, /* SD0_DATA6 */
+				 <RZT2H_PORT_PINMUX(13, 1, 0x29)>; /* SD0_DATA7 */
+		};
+
+		ctrl-pins {
+			pinmux = <RZT2H_PORT_PINMUX(12, 0, 0x29)>, /* SD0_CLK */
+				 <RZT2H_PORT_PINMUX(12, 1, 0x29)>, /* SD0_CMD */
+				 <RZT2H_PORT_PINMUX(13, 2, 0x29)>; /* SD0_RST# */
+		};
+	};
+
+#if SD0_SD
+	sdhi0-pwen-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(2, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SD0_PWEN";
+	};
+#endif
+
+	sdhi0_sd_pins: sd0-sd-group {
+		data-pins {
+			pinmux = <RZT2H_PORT_PINMUX(12, 2, 0x29)>, /* SD0_DATA0 */
+				 <RZT2H_PORT_PINMUX(12, 3, 0x29)>, /* SD0_DATA1 */
+				 <RZT2H_PORT_PINMUX(12, 4, 0x29)>, /* SD0_DATA2 */
+				 <RZT2H_PORT_PINMUX(12, 5, 0x29)>; /* SD0_DATA3 */
+		};
+
+		ctrl-pins {
+			pinmux = <RZT2H_PORT_PINMUX(12, 0, 0x29)>, /* SD0_CLK */
+				 <RZT2H_PORT_PINMUX(12, 1, 0x29)>, /* SD0_CMD */
+				 <RZT2H_PORT_PINMUX(22, 5, 0x29)>, /* SD0_CD */
+				 <RZT2H_PORT_PINMUX(22, 6, 0x29)>; /* SD0_WP */
+		};
+	};
+
+#if SD1_MICRO_SD
+	sdhi1-pwen-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(8, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SD1_PWEN";
+	};
+#endif
+
+	sdhi1_pins: sd1-group {
+		data-pins {
+			pinmux = <RZT2H_PORT_PINMUX(16, 7, 0x29)>, /* SD1_DATA0 */
+				 <RZT2H_PORT_PINMUX(17, 0, 0x29)>, /* SD1_DATA1 */
+				 <RZT2H_PORT_PINMUX(17, 1, 0x29)>, /* SD1_DATA2 */
+				 <RZT2H_PORT_PINMUX(17, 2, 0x29)>; /* SD1_DATA3 */
+		};
+
+		ctrl-pins {
+			pinmux = <RZT2H_PORT_PINMUX(16, 5, 0x29)>, /* SD1_CLK */
+				 <RZT2H_PORT_PINMUX(16, 6, 0x29)>, /* SD1_CMD */
+				 <RZT2H_PORT_PINMUX(17, 4, 0x29)>; /* SD1_CD */
+		};
+	};
+};
+
+&sci0 {
+	pinctrl-0 = <&sci0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+#if SD0_EMMC
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	non-removable;
+	mmc-hs200-1_8v;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#endif
+
+#if SD0_SD
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_sd_pins>;
+	pinctrl-1 = <&sdhi0_sd_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+#if SD1_MICRO_SD
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+&usb2_phy {
+	pinctrl-0 = <&usb_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+/*
+ * ADC0 AN000 can be connected to a potentiometer on the board or
+ * exposed on ADC header.
+ *
+ * T2H:
+ * SW17[1] = ON, SW17[2] = OFF - Potentiometer
+ * SW17[1] = OFF, SW17[2] = ON  - CN41 header
+ * N2H:
+ * DSW6[1] = OFF, DSW6[2] = ON - Potentiometer
+ * DSW6[1] = ON, DSW6[2] = OFF - CN3 header
+ */
+&adc0 {
+	status = "okay";
+
+	channel@0 {
+		reg = <0x0>;
+	};
+
+	channel@1 {
+		reg = <0x1>;
+	};
+
+	channel@2 {
+		reg = <0x2>;
+	};
+
+	channel@3 {
+		reg = <0x3>;
+	};
+};
+
+/*
+ * ADC1 AN100 can be exposed on ADC header or on mikroBUS connector.
+ *
+ * T2H:
+ * SW18[1] = ON, SW18[2] = OFF - CN42 header
+ * SW18[1] = OFF, SW18[2] = ON - mikroBUS
+ * N2H:
+ * DSW6[3] = ON, DSW6[4] = OFF - CN4 header
+ * DSW6[3] = OFF, DSW6[4] = ON - mikroBUS
+ *
+ * ADC1 AN101 can be exposed on ADC header or on Grove2 connector.
+ *
+ * T2H:
+ * SW18[3] = ON, SW18[4] = OFF - CN42 header
+ * SW18[3] = OFF, SW18[4] = ON - Grove2
+ * N2H:
+ * DSW6[5] = ON, DSW6[6] = OFF - CN4 header
+ * DSW6[5] = OFF, DSW6[6] = ON - Grove2
+ *
+ * ADC1 AN102 can be exposed on ADC header or on Grove2 connector.
+ *
+ * T2H:
+ * SW18[5] = ON, SW18[6] = OFF - CN42 header
+ * SW18[5] = OFF, SW18[6] = ON - Grove2
+ * N2H:
+ * DSW6[7] = ON, DSW6[8] = OFF - CN4 header
+ * DSW6[7] = OFF, DSW6[8] = ON - Grove2
+ */
+&adc1 {
+	status = "okay";
+
+	channel@0 {
+		reg = <0x0>;
+	};
+
+	channel@1 {
+		reg = <0x1>;
+	};
+
+	channel@2 {
+		reg = <0x2>;
+	};
+
+	channel@3 {
+		reg = <0x3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-emmc.dtso b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-emmc.dtso
new file mode 100644
index 000000000000..eda2b31f6d79
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-emmc.dtso
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Shared DT overlay for the eMMC Sub Board (RTK0EF0186B02000BJ), which
+ * is connected to the CN15 connector on the RZ/V2H and RZ/V2N EVKs.
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&{/} {
+	aliases {
+		mmc0 = "/soc/mmc@15c00000";
+	};
+};
+
+&pinctrl {
+	sdhi0_emmc_pins: emmc-pins {
+		sd0-clk {
+			pins = "SD0CLK";
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+
+		sd0-dat-cmd {
+			pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0DAT4",
+			       "SD0DAT5", "SD0DAT6", "SD0DAT7", "SD0CMD";
+			input-enable;
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-sd.dtso b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-sd.dtso
new file mode 100644
index 000000000000..0af1e0a6c7f4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-sd.dtso
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Shared DT overlay for the microSD Sub Board (RTK0EF0186B01000BJ), which
+ * is connected to the CN15 connector on the RZ/V2H and RZ/V2N EVKs.
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&{/} {
+	aliases {
+		mmc0 = "/soc/mmc@15c00000";
+	};
+
+	vqmmc_sdhi0: regulator-vqmmc-sdhi0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI0 VqmmC";
+		gpios = <&pinctrl RZG2L_GPIO(10, 0) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+};
+
+&pinctrl {
+	sdhi0-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(10, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd0_pwr_en";
+	};
+
+	sdhi0_pins: sd0 {
+		sd0-cd {
+			pinmux = <RZG2L_PORT_PINMUX(10, 5, 15)>; /* SD0_CD */
+		};
+
+		sd0-clk {
+			pins = "SD0CLK";
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+
+		sd0-dat-cmd {
+			pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0CMD";
+			input-enable;
+			renesas,output-impedance = <3>;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 06c7e9746304..fa8bfee07b3c 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -592,6 +592,7 @@
 };
 
 &i2c_dvfs {
+	bootph-all;
 	status = "okay";
 
 	clock-frequency = <400000>;
@@ -625,6 +626,7 @@
 		compatible = "rohm,br24t01", "atmel,24c01";
 		reg = <0x50>;
 		pagesize = <8>;
+		bootph-all;
 	};
 };
 
@@ -940,6 +942,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -1001,6 +1004,11 @@
 	shared-pin;
 };
 
+/* Firmware should reserve it but sadly doesn't */
+&swdt {
+	status = "reserved";
+};
+
 &usb_extal_clk {
 	clock-frequency = <50000000>;
 };
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi
index 8ae6af1af094..4caa0281a687 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi
@@ -15,7 +15,9 @@
  *	(D) CPU3 (2ch)  --/			   (TDM-1 : 2,3ch)
  *	(E) CPU4 (2ch)  --/			   (TDM-2 : 4,5ch)
  *	(F) CPU5 (2ch)  --/			   (TDM-3 : 6,7ch)
- *	(G) CPU6 (6ch) <----  (6ch) (Z) PCM3168A-c
+ *	(G) CPU6 (2ch) <----  (6ch) (Z) PCM3168A-c (TDM-a: 0,1ch)
+ *	(H) CPU7 (2ch) <--/			   (TDM-b: 2,3ch)
+ *	(I) CPU8 (2ch) <--/			   (TDM-c: 4,5ch)
  *
  *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
  *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
@@ -25,7 +27,9 @@
  *	(F) aplay   -D plughw:1,3 xxx.wav (TDM-3)
  *
  *	(A) arecord -D plughw:0,0 xxx.wav
- *	(G) arecord -D plughw:1,4 xxx.wav
+ *	(G) arecord -D plughw:1,4 xxx.wav (TDM-a)
+ *	(H) arecord -D plughw:1,5 xxx.wav (TDM-b)
+ *	(I) arecord -D plughw:1,6 xxx.wav (TDM-c)
  */
 / {
 	sound_card_kf: expand-sound {
@@ -35,13 +39,18 @@
 		routing = "pcm3168a Playback", "DAI2 Playback",
 			  "pcm3168a Playback", "DAI3 Playback",
 			  "pcm3168a Playback", "DAI4 Playback",
-			  "pcm3168a Playback", "DAI5 Playback";
+			  "pcm3168a Playback", "DAI5 Playback",
+			  "DAI6 Capture", "pcm3168a Capture",
+			  "DAI7 Capture", "pcm3168a Capture",
+			  "DAI8 Capture", "pcm3168a Capture";
 
 		dais = <&snd_kf1 /* (C) CPU2 */
 			&snd_kf2 /* (D) CPU3 */
 			&snd_kf3 /* (E) CPU4 */
 			&snd_kf4 /* (F) CPU5 */
-			&snd_kf5 /* (G) GPU6 */
+			&snd_kf5 /* (G) CPU6 */
+			&snd_kf6 /* (H) CPU7 */
+			&snd_kf7 /* (I) CPU8 */
 		>;
 	};
 };
@@ -50,7 +59,9 @@
 	ports {
 		#address-cells = <1>;
 		#size-cells = <0>;
+
 		mclk-fs = <512>;
+		prefix = "pcm3168a";
 
 		/*
 		 * (Y) PCM3168A-p
@@ -59,7 +70,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			prefix = "pcm3168a";
 			convert-channels = <8>; /* to 8ch TDM */
 
 			/* (C) CPU2 -> (Y) PCM3168A-p */
@@ -91,10 +101,28 @@
 		 * (Z) PCM3168A-c
 		 */
 		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			reg = <1>;
+
+			convert-channels = <6>; /* to 6ch TDM */
+
 			/* (G) CPU6 <- PCM3168A-c */
-			pcm3168a_endpoint_c: endpoint {
-				remote-endpoint = <&rsnd_for_pcm3168a_capture>;
+			pcm3168a_endpoint_c1: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&rsnd_for_pcm3168a_capture1>;
+				clocks = <&clksndsel>;
+			};
+			/* (H) CPU7 <- PCM3168A-c */
+			pcm3168a_endpoint_c2: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&rsnd_for_pcm3168a_capture2>;
+				clocks = <&clksndsel>;
+			};
+			/* (I) CPU8 <- PCM3168A-c */
+			pcm3168a_endpoint_c3: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&rsnd_for_pcm3168a_capture3>;
 				clocks = <&clksndsel>;
 			};
 		};
@@ -160,12 +188,35 @@
 		 */
 		snd_kf5: port@6 {
 			reg = <6>;
-			rsnd_for_pcm3168a_capture: endpoint {
-				remote-endpoint = <&pcm3168a_endpoint_c>;
+			rsnd_for_pcm3168a_capture1: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_c1>;
+				bitclock-master;
+				frame-master;
+				capture = <&ssiu40 &ssi4>;
+			};
+		};
+		/*
+		 * (H) CPU7
+		 */
+		snd_kf6: port@7 {
+			reg = <7>;
+			rsnd_for_pcm3168a_capture2: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_c2>;
+				bitclock-master;
+				frame-master;
+				capture = <&ssiu41 &ssi4>;
+			};
+		};
+		/*
+		 * (I) CPU8
+		 */
+		snd_kf7: port@8 {
+			reg = <8>;
+			rsnd_for_pcm3168a_capture3: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_c3>;
 				bitclock-master;
 				frame-master;
-				dai-tdm-slot-num = <6>;
-				capture  = <&ssi4>;
+				capture = <&ssiu42 &ssi4>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi
index 4cf632bc4621..67a0057a3383 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi
@@ -15,7 +15,9 @@
  *	(D) CPU2 (2ch)  --/			   (TDM-1 : 2,3ch)
  *	(E) CPU4 (2ch)  --/			   (TDM-2 : 4,5ch)
  *	(F) CPU5 (2ch)  --/			   (TDM-3 : 6,7ch)
- *	(G) CPU6 (6ch) <----  (6ch) (Z)	PCM3168A-c
+ *	(G) CPU6 (2ch) <----  (6ch) (Z) PCM3168A-c (TDM-a: 0,1ch)
+ *	(H) CPU7 (2ch) <--/			   (TDM-b: 2,3ch)
+ *	(I) CPU8 (2ch) <--/			   (TDM-c: 4,5ch)
  *
  *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
  *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
@@ -25,7 +27,9 @@
  *	(F) aplay   -D plughw:1,3 xxx.wav (TDM-3)
  *
  *	(A) arecord -D plughw:0,0 xxx.wav
- *	(G) arecord -D plughw:1,4 xxx.wav
+ *	(G) arecord -D plughw:1,4 xxx.wav (TDM-a)
+ *	(H) arecord -D plughw:1,5 xxx.wav (TDM-b)
+ *	(I) arecord -D plughw:1,6 xxx.wav (TDM-c)
  */
 / {
 	sound_card_kf: expand-sound {
@@ -36,19 +40,25 @@
 			  "pcm3168a Playback", "DAI3 Playback",
 			  "pcm3168a Playback", "DAI4 Playback",
 			  "pcm3168a Playback", "DAI5 Playback",
-			  "DAI6 Capture",      "pcm3168a Capture";
+			  "DAI6 Capture",      "pcm3168a Capture",
+			  "DAI7 Capture",      "pcm3168a Capture",
+			  "DAI8 Capture",      "pcm3168a Capture";
 
 		links = <&fe_c		/* (C) CPU2	  */
 			 &fe_d		/* (D) CPU3	  */
 			 &fe_e		/* (E) CPU4	  */
 			 &fe_f		/* (F) CPU5	  */
-			 &rsnd_g	/* (G) CPU6	  */
+			 &fe_g		/* (G) CPU6	  */
+			 &fe_h		/* (H) CPU7	  */
+			 &fe_i		/* (I) CPU8	  */
 			 &be_y		/* (Y) PCM3168A-p */
+			 &be_z		/* (Z) PCM3168A-c */
 		>;
 
-		dpcm {
+		dpcm: dpcm {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			non-supplier;
 
 			ports@0 {
 				#address-cells = <1>;
@@ -62,21 +72,32 @@
 				 * (D) CPU3
 				 * (E) CPU4
 				 * (F) CPU5
+				 * (G) CPU6
+				 * (H) CPU7
+				 * (I) CPU8
 				 */
 			fe_c:	port@2 { reg = <2>; fe_c_ep: endpoint { remote-endpoint = <&rsnd_c_ep>; }; };
 			fe_d:	port@3 { reg = <3>; fe_d_ep: endpoint { remote-endpoint = <&rsnd_d_ep>; }; };
 			fe_e:	port@4 { reg = <4>; fe_e_ep: endpoint { remote-endpoint = <&rsnd_e_ep>; }; };
 			fe_f:	port@5 { reg = <5>; fe_f_ep: endpoint { remote-endpoint = <&rsnd_f_ep>; }; };
+
+			fe_g:	port@6 { reg = <6>; fe_g_ep: endpoint { remote-endpoint = <&rsnd_g_ep>; }; };
+			fe_h:	port@7 { reg = <7>; fe_h_ep: endpoint { remote-endpoint = <&rsnd_h_ep>; }; };
+			fe_i:	port@8 { reg = <8>; fe_i_ep: endpoint { remote-endpoint = <&rsnd_i_ep>; }; };
 			};
 
 			ports@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <1>;
 				/*
 				 * BE
 				 *
 				 * (Y) PCM3168A-p
+				 * (Z) PCM3168A-c
 				 */
-			be_y:	port { be_y_ep: endpoint { remote-endpoint = <&pcm3168a_y_ep>; }; };
+			be_y:	port@0 { reg = <0>; be_y_ep: endpoint { remote-endpoint = <&pcm3168a_y_ep>; }; };
+			be_z:	port@1 { reg = <1>; be_z_ep: endpoint { remote-endpoint = <&pcm3168a_z_ep>; }; };
 			};
 		};
 	};
@@ -106,8 +127,9 @@
 		 */
 		port@1 {
 			reg = <1>;
+			convert-channels = <6>; /* to 6ch TDM */
 			pcm3168a_z_ep: endpoint {
-				remote-endpoint = <&rsnd_g_ep>;
+				remote-endpoint = <&be_z_ep>;
 				clocks = <&clksndsel>;
 			};
 		};
@@ -171,13 +193,37 @@
 		/*
 		 * (G) CPU6
 		 */
-		rsnd_g: port@6 {
+		port@6 {
 			reg = <6>;
 			rsnd_g_ep: endpoint {
-				remote-endpoint = <&pcm3168a_z_ep>;
+				remote-endpoint = <&fe_g_ep>;
+				bitclock-master;
+				frame-master;
+				capture = <&ssiu40 &ssi4>;
+			};
+		};
+		/*
+		 * (H) CPU7
+		 */
+		port@7 {
+			reg = <7>;
+			rsnd_h_ep: endpoint {
+				remote-endpoint = <&fe_h_ep>;
+				bitclock-master;
+				frame-master;
+				capture = <&ssiu41 &ssi4>;
+			};
+		};
+		/*
+		 * (I) CPU8
+		 */
+		port@8 {
+			reg = <8>;
+			rsnd_i_ep: endpoint {
+				remote-endpoint = <&fe_i_ep>;
 				bitclock-master;
 				frame-master;
-				capture = <&ssi4>;
+				capture = <&ssiu42 &ssi4>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi
index f01d91aaadf3..fd75801c329e 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi
@@ -15,7 +15,9 @@
  *	(D) CPU2 (2ch)  --/			   (TDM-1 : 2,3ch)
  *	(E) CPU4 (2ch)  --/			   (TDM-2 : 4,5ch)
  *	(F) CPU5 (2ch)  --/			   (TDM-3 : 6,7ch)
- *	(G) CPU6 (6ch) <----  (6ch) (Z)	PCM3168A-c
+ *	(G) CPU6 (2ch) <----  (6ch) (Z) PCM3168A-c (TDM-a: 0,1ch)
+ *	(H) CPU7 (2ch) <--/			   (TDM-b: 2,3ch)
+ *	(I) CPU8 (2ch) <--/			   (TDM-c: 4,5ch)
  *
  *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
  *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
@@ -25,7 +27,9 @@
  *	(F) aplay   -D plughw:1,3 xxx.wav (TDM-3)
  *
  *	(A) arecord -D plughw:0,0 xxx.wav
- *	(G) arecord -D plughw:1,4 xxx.wav
+ *	(G) arecord -D plughw:1,4 xxx.wav (TDM-a)
+ *	(H) arecord -D plughw:1,5 xxx.wav (TDM-b)
+ *	(I) arecord -D plughw:1,6 xxx.wav (TDM-c)
  */
 
 / {
@@ -39,7 +43,10 @@
 		simple-audio-card,routing = "pcm3168a Playback", "DAI2 Playback",
 					    "pcm3168a Playback", "DAI3 Playback",
 					    "pcm3168a Playback", "DAI4 Playback",
-					    "pcm3168a Playback", "DAI5 Playback";
+					    "pcm3168a Playback", "DAI5 Playback",
+					    "DAI6 Capture",      "pcm3168a Capture",
+					    "DAI7 Capture",      "pcm3168a Capture",
+					    "DAI8 Capture",      "pcm3168a Capture";
 
 		simple-audio-card,dai-link@0 {
 			#address-cells = <1>;
@@ -88,16 +95,40 @@
 		};
 
 		simple-audio-card,dai-link@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			reg = <1>;
+			convert-channels = <6>; /* to 6ch TDM */
+
 			/*
 			 * (G) CPU6
 			 */
-			cpu {
+			cpu@0 {
+				reg = <0>;
 				bitclock-master;
 				frame-master;
 				sound-dai = <&rcar_sound 6>;
 			};
 			/*
+			 * (H) CPU7
+			 */
+			cpu@1 {
+				reg = <1>;
+				bitclock-master;
+				frame-master;
+				sound-dai = <&rcar_sound 7>;
+			};
+			/*
+			 * (I) CPU8
+			 */
+			cpu@2 {
+				reg = <2>;
+				bitclock-master;
+				frame-master;
+				sound-dai = <&rcar_sound 8>;
+			};
+
+			/*
 			 * (Z) PCM3168A-c
 			 */
 			codec {
@@ -151,7 +182,19 @@
 		 * (G) CPU6
 		 */
 		dai6 {
-			capture = <&ssi4>;
+			capture = <&ssiu40 &ssi4>;
+		};
+		/*
+		 * (H) CPU7
+		 */
+		dai7 {
+			capture = <&ssiu41 &ssi4>;
+		};
+		/*
+		 * (I) CPU8
+		 */
+		dai8 {
+			capture = <&ssiu42 &ssi4>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 5c211ed83049..2a157d1efb3d 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -4,8 +4,24 @@
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
+ *
+ * Sample Audio settings:
+ *
+ *	> amixer set "DVC Out" 1%
+ *	> amixer set "DVC In"  20%
+ *
+ *	// if you use xxxx-mix+split.dtsi
+ *	> amixer -D hw:1 set "pcm3168a DAC1" 50%
+ *	> amixer -D hw:1 set "pcm3168a DAC2" 50%
+ *	> amixer -D hw:1 set "pcm3168a DAC3" 50%
+ *	> amixer -D hw:1 set "pcm3168a DAC4" 50%
+ *
+ *	// else
+ *	> amixer -D hw:1 set "DAC1" 50%
+ *	> amixer -D hw:1 set "DAC2" 50%
+ *	> amixer -D hw:1 set "DAC3" 50%
+ *	> amixer -D hw:1 set "DAC4" 50%
  */
-
 / {
 	aliases {
 		serial1 = &hscif0;
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index cb11abba7bef..a9e53b36f1d9 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -4,6 +4,11 @@
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * Sample Audio settings:
+ *
+ *	> amixer set "DVC Out" 1%
+ *	> amixer set "DVC In"  20%
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -239,6 +244,7 @@
 };
 
 &i2c_dvfs {
+	bootph-all;
 	status = "okay";
 
 	clock-frequency = <400000>;
@@ -272,6 +278,7 @@
 		compatible = "rohm,br24t01", "atmel,24c01";
 		reg = <0x50>;
 		pagesize = <8>;
+		bootph-all;
 	};
 };
 
@@ -443,6 +450,7 @@
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
@@ -487,6 +495,11 @@
 	shared-pin;
 };
 
+/* Firmware should reserve it but sadly doesn't */
+&swdt {
+	status = "reserved";
+};
+
 &usb2_phy1 {
 	pinctrl-0 = <&usb1_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso b/arch/arm64/boot/dts/renesas/white-hawk-ard-audio-da7212.dtso
index e6cf304c77ee..f2d53e958da1 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
+++ b/arch/arm64/boot/dts/renesas/white-hawk-ard-audio-da7212.dtso
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the White Hawk board with ARD-AUDIO-DA7212 Board
+ * Device Tree Source for White Hawk (Single) board with ARD-AUDIO-DA7212 board
  *
  * You can find and buy "ARD-AUDIO-DA7212" at Digi-Key
  *
@@ -27,12 +27,12 @@
  * +----------------------------+
  * |Breakout board		|
  * |				|	+---------------+
- * |CN34 (I2C CN)		|	|J1		|
+ * |CN(30)34 (I2C CN)		|	|J1		|
  * |	I2C0_SCL	   pin3 |<----->| pin20 SCL	|
  * |	I2C0_SDA	   pin5 |<----->| pin18 SDA	|
  * |				|	+---------------+
  * |				|	+-----------------------+
- * |CN4 (Power)		        |	|J7			|
+ * |CN(300)4 (Power)	        |	|J7			|
  * |	3v3 (v)		   pin9 |<----->| pin4  / pin8  3.3v	|
  * |	GND (v)	    pin3 / pin4 |<----->| pin12 / pin14 GND	|
  * +----------------------------+	+-----------------------+
@@ -108,7 +108,7 @@
 	};
 
 	tpu0_pins: tpu0 {
-		groups = "tpu_to0_a";
+		groups = "tpu_to0_b";
 		function = "tpu";
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
index f24814d7c924..b4024e85ae5a 100644
--- a/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
@@ -201,6 +201,7 @@
 &hscif0 {
 	pinctrl-0 = <&hscif0_pins>;
 	pinctrl-names = "default";
+	bootph-all;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/white-hawk-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-csi-dsi.dtsi
index 3006b0a64f41..a5d1c1008e7e 100644
--- a/arch/arm64/boot/dts/renesas/white-hawk-csi-dsi.dtsi
+++ b/arch/arm64/boot/dts/renesas/white-hawk-csi-dsi.dtsi
@@ -21,6 +21,9 @@
 				bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
 				clock-lanes = <0>;
 				data-lanes = <1 2 3>;
+				line-orders = <MEDIA_BUS_CSI2_CPHY_LINE_ORDER_ABC
+					       MEDIA_BUS_CSI2_CPHY_LINE_ORDER_BCA
+					       MEDIA_BUS_CSI2_CPHY_LINE_ORDER_ABC>;
 				remote-endpoint = <&max96712_out0>;
 			};
 		};
@@ -41,6 +44,9 @@
 				bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
 				clock-lanes = <0>;
 				data-lanes = <1 2 3>;
+				line-orders = <MEDIA_BUS_CSI2_CPHY_LINE_ORDER_ABC
+					       MEDIA_BUS_CSI2_CPHY_LINE_ORDER_BCA
+					       MEDIA_BUS_CSI2_CPHY_LINE_ORDER_ABC>;
 				remote-endpoint = <&max96712_out1>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
new file mode 100644
index 000000000000..976a3ab44e5a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the White Hawk Single board
+ *
+ * Copyright (C) 2023-2024 Glider bv
+ */
+
+#include "white-hawk-cpu-common.dtsi"
+#include "white-hawk-common.dtsi"
+
+/ {
+	model = "Renesas White Hawk Single board";
+	compatible = "renesas,white-hawk-single";
+
+	aliases {
+		ethernet3 = &tsn0;
+	};
+};
+
+&hscif0 {
+	uart-has-rtscts;
+};
+
+&hscif0_pins {
+	groups = "hscif0_data", "hscif0_ctrl";
+	function = "hscif0";
+};
+
+&pfc {
+	tsn0_pins: tsn0 {
+		mux {
+			groups = "tsn0_link", "tsn0_mdio", "tsn0_rgmii",
+				 "tsn0_txcrefclk";
+			function = "tsn0";
+		};
+
+		link {
+			groups = "tsn0_link";
+			bias-disable;
+		};
+
+		mdio {
+			groups = "tsn0_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "tsn0_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+	};
+};
+
+&tsn0 {
+	pinctrl-0 = <&tsn0_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii";
+	phy-handle = <&tsn0_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		tsn0_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-id002b.0980",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupts-extended = <&gpio4 3 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 86cc418a2255..dbdda9783e93 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,15 +1,24 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk050h3146w-a2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk050h3146w.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk050h3148w.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk500hd1829.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-pp1516-ltk050h3146w-a2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-pp1516-ltk050h3148w.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-lvds-9904379.dtbo
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-video-demo.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-bpi-p2-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-s0.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-sakurapi-rk3308b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb
@@ -38,6 +47,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-ind.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
@@ -61,6 +71,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinephone-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou-video-demo.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb
@@ -74,10 +85,16 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-armsom-sige1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-nanopi-zero2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2f.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-d.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb
@@ -111,15 +128,25 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lckfb-tspi.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-cb2-manta.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-pi2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-tinker-board-3.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-tinker-board-3s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-9tripod-x3568-v4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-easepi-r1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-hinlink-h66k.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-hinlink-h68k.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mecsbc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-photonicat.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts233.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
@@ -128,7 +155,16 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-100ask-dshanpi-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-r76s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-w3.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
@@ -137,18 +173,30 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb2-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-firefly-itx-3588j.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-h96-max-v58.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-ethernet-switch.dtbo
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-pre-ict-tester.dtbo
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-mnt-reform2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-ultra.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-roc-rt.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5t.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
@@ -161,5 +209,80 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5c.dtb
+
+# Overlay application tests
+#
+# A .dtbo must have its own
+#
+#  dtb-$(CONFIG_ARCH_ROCKCHIP) += <overlay>.dtbo
+#
+# entry, and at least one overlay application test reflecting a possible
+# hardware combination in real life:
+#
+#  dtb-$(CONFIG_ARCH_ROCKCHIP) += <overlay-application-test>.dtb
+#  <overlay-application-test>-dtbs := <base>.dtb <overlay-1>.dtbo [<overlay-2>.dtbo ...]
+#
+# This will make the <base>.dtb have symbols (like when DTC_FLAGS has -@ passed)
+# and generate a new DTB (<overlay-application-test>.dtb) which is the
+# result of the application of <overlay-1>.dtbo and other listed overlays on top
+# of <base>.dtb.
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-haikou-lvds-9904379.dtb
+px30-ringneck-haikou-haikou-lvds-9904379-dtbs := px30-ringneck-haikou.dtb \
+	px30-ringneck-haikou-lvds-9904379.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-haikou-video-demo.dtb
+px30-ringneck-haikou-haikou-video-demo-dtbs := px30-ringneck-haikou.dtb \
+	px30-ringneck-haikou-video-demo.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou-haikou-video-demo.dtb
+rk3399-puma-haikou-haikou-video-demo-dtbs := rk3399-puma-haikou.dtb \
+	rk3399-puma-haikou-video-demo.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtb
+rk3399-rockpro64-screen-dtbs := rk3399-rockpro64.dtb \
+	rk3399-rockpro64-screen.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2-screen.dtb
+rk3399-rockpro64-v2-screen-dtbs := rk3399-rockpro64-v2.dtb \
+	rk3399-rockpro64-screen.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb
+rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \
+	rk3568-wolfvision-pf5-display-vz.dtbo \
+	rk3568-wolfvision-pf5-io-expander.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtb
+rk3576-armsom-sige5-v1.2-wifibt-dtbs := rk3576-armsom-sige5.dtb \
+	rk3576-armsom-sige5-v1.2-wifibt.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtb
+rk3588-edgeble-neu6a-wifi-dtbs := rk3588-edgeble-neu6a-io.dtb \
+	rk3588-edgeble-neu6a-wifi.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-wifi.dtb
+rk3588-edgeble-neu6b-wifi-dtbs := rk3588-edgeble-neu6b-io.dtb \
+	rk3588-edgeble-neu6a-wifi.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-ethernet-switch.dtb
+rk3588-jaguar-ethernet-switch-dtbs := rk3588-jaguar.dtb \
+	rk3588-jaguar-ethernet-switch.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-pre-ict-tester.dtb
+rk3588-jaguar-pre-ict-tester-dtbs := rk3588-jaguar.dtb \
+	rk3588-jaguar-pre-ict-tester.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtb
+rk3588-rock-5b-pcie-ep-dtbs := rk3588-rock-5b.dtb \
+	rk3588-rock-5b-pcie-ep.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtb
+rk3588-rock-5b-pcie-srns-dtbs := rk3588-rock-5b.dtb \
+	rk3588-rock-5b-pcie-srns.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-haikou-video-demo.dtb
+rk3588-tiger-haikou-haikou-video-demo-dtbs := rk3588-tiger-haikou.dtb \
+	rk3588-tiger-haikou-video-demo.dtbo
diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts
new file mode 100644
index 000000000000..a31c61c8f148
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-cobra.dtsi"
+
+/ {
+	model = "Theobroma Systems Cobra with LTK050H3146W-A2 Display";
+	compatible = "tsd,px30-cobra-ltk050h3146w-a2", "tsd,px30-cobra", "rockchip,px30";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3146w-a2";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts
new file mode 100644
index 000000000000..a3c6edfdb37c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-cobra.dtsi"
+
+/ {
+	model = "Theobroma Systems Cobra with LTK050H3146W Display";
+	compatible = "tsd,px30-cobra-ltk050h3146w", "tsd,px30-cobra", "rockchip,px30";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3146w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts
new file mode 100644
index 000000000000..9b5eff392dfa
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-cobra.dtsi"
+
+/ {
+	model = "Theobroma Systems Cobra with ltk050h3148w Display";
+	compatible = "tsd,px30-cobra-ltk050h3148w", "tsd,px30-cobra", "rockchip,px30";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3148w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts
new file mode 100644
index 000000000000..36b7cae49e31
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-cobra.dtsi"
+
+/ {
+	model = "Theobroma Systems Cobra prototype with LTK500HD1829 Display";
+	compatible = "tsd,px30-cobra-ltk500hd1829", "tsd,px30-cobra", "rockchip,px30";
+
+	aliases {
+		mmc1 = &sdmmc;
+	};
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk500hd1829";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cobra_pin_hog>, <&cobra_proto_hog>;
+
+	hog {
+		cobra_proto_hog: cobra-proto-hog {
+			rockchip,pins =
+				/* STUSB4500 open drain outout POWER_OK2, needs pull-up */
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* STUSB4500 open drain outout POWER_OK3, needs pull-up */
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	broken-cd;
+	cap-sd-highspeed;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vccio_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi b/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
new file mode 100644
index 000000000000..b7e669d8ba4d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc5v0_sys>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm1 0 1000 0>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&heartbeat_led_pin>;
+
+		/*
+		 * LED14 on the PCB. Typically NOT populated.
+		 */
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+			label = "heartbeat";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		ring_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			label = "ring_red";
+			pwms = <&pwm5 0 1000000 0>;
+			max-brightness = <255>;
+		};
+
+		ring_green: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			label = "ring_green";
+			pwms = <&pwm6 0 1000000 0>;
+			max-brightness = <255>;
+		};
+
+		ring_blue: led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			label = "ring_blue";
+			pwms = <&pwm7 0 1000000 0>;
+			max-brightness = <255>;
+		};
+	};
+
+	/* also named 5V_Q7 in schematics */
+	vcc5v0_sys: regulator-vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	/*
+	 * For hs200 support, U-Boot would have to set the RK809 DCDC4
+	 * rail to 1.8V from the default of 3.0V. It doesn't do that on
+	 * devices out in the field, so disable hs200.
+	 * mmc-hs200-1_8v;
+	 */
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_emmc>;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-handle = <&dp83825>;
+	phy-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+/* I2C0 = PMIC, STUSB4500, RTC */
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_3v3>;
+		vcc6-supply = <&vcc_3v3>;
+		vcc7-supply = <&vcc_3v3>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
+				regulator-name = "vcc_3v0_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_3v3: DCDC_REG5 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG3 {
+				regulator-name = "vcc_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_2v8: LDO_REG4 {
+				regulator-name = "vcc_2v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			/*
+			 * vccio_sd also supplies the vmmc supply on prototypes
+			 * with sd-slots, so needs to stay single voltage for
+			 * those. Production models don't have sd-slots anymore
+			 * and only supply vccio2 from this regulator.
+			 */
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			/* vcc_sdio also supplies the pull-up resistors for i2c1 */
+			vcc_sdio: LDO_REG6 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG7 {
+				regulator-name = "vcc_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8_lcd: LDO_REG8 {
+				regulator-name = "vcc_1v8_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG9 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		AVDD28-supply = <&vcc_2v8>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA1 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tch_int &tch_rst>;
+		reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		touchscreen-inverted-x;
+		VDDIO-supply = <&vcc_3v3>;
+	};
+};
+
+/*
+ * Enable pull-ups to prevent floating pins when the touch
+ * panel is not connected.
+ */
+&i2c2_xfer {
+	rockchip,pins =
+		<2 RK_PB7 2 &pcfg_pull_up>,
+		<2 RK_PC0 2 &pcfg_pull_up>;
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_sdio>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_emmc>;
+	status = "okay";
+};
+
+&mdio {
+	dp83825: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&phy_rst>;
+		reset-assert-us = <50000>;
+		reset-deassert-us = <50000>;
+		reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cobra_pin_hog>;
+
+	hog {
+		cobra_pin_hog: cobra-pin-hog {
+			rockchip,pins =
+				/* USB_HUB2_RESET */
+				<0 RK_PA5 RK_FUNC_GPIO &pcfg_output_high>,
+				/* USB_HUB1_RESET */
+				<0 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>,
+				/* The default pull-down can keep the IC in reset. */
+				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
+				/* USB-A 5V enable */
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_output_high>,
+				/* USB-A data enable */
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins =
+				<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		phy_rst: phy-rst {
+			rockchip,pins =
+				<2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		heartbeat_led_pin: heartbeat-led-pin {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	panel {
+		dsp_rst: dsp-rst {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		tch_int: tch-int {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		tch_rst: tch-rst {
+			rockchip,pins =
+				<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3>;
+	pmuio2-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm5 {
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart1 {
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&uart5_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "disabled";
+};
+
+&vopl_mmu {
+	status = "disabled";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
index 1edfd643b25a..a334ef0629d1 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -31,7 +31,7 @@
 	};
 
 	vcc3v3_btreg: vcc3v3-btreg {
-		compatible = "regulator-gpio";
+		compatible = "regulator-fixed";
 		enable-active-high;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_enable_h>;
@@ -39,7 +39,6 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
-		states = <3300000 0x0>;
 	};
 
 	vcc3v3_rf_aux_mod: regulator-vcc3v3-rf-aux-mod {
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
index 80db778c9684..b60e68faa83a 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
@@ -26,5 +26,5 @@
 };
 
 &vcc3v3_btreg {
-	enable-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+	gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
index 165d09ccb942..5886b802c520 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
@@ -39,5 +39,5 @@
 };
 
 &vcc3v3_btreg {
-	enable-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+	gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index d93aaac7a42f..85d1642eb9be 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -124,6 +124,8 @@
 };
 
 &dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	ports {
@@ -483,8 +485,7 @@
 
 	ports {
 		port@0 {
-			mipi_in_ucam: endpoint@0 {
-				reg = <0>;
+			mipi_in_ucam: endpoint {
 				data-lanes = <1 2>;
 				remote-endpoint = <&ucam_out>;
 			};
diff --git a/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts
new file mode 100644
index 000000000000..932721ffd470
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-pp1516.dtsi"
+
+/ {
+	model = "Theobroma Systems PP-1516 with LTK050H3146W-A2 Display";
+	compatible = "tsd,px30-pp1516-ltk050h3146w-a2", "tsd,px30-pp1516", "rockchip,px30";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3146w-a2";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts
new file mode 100644
index 000000000000..70adf091371c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include "px30-pp1516.dtsi"
+
+/ {
+	model = "Theobroma Systems PP-1516 with LTK050H3148W Display";
+	compatible = "tsd,px30-pp1516-ltk050h3148w", "tsd,px30-pp1516", "rockchip,px30";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3148w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dsp_rst>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc_2v8>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi b/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi
new file mode 100644
index 000000000000..192791993f05
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc5v0_sys>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm1 0 1000 0>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&debug_led_pin>, <&heartbeat_led_pin>;
+
+		/*
+		 * LED2 on the PCB, left of the USB-C connector.
+		 * Typically NOT populated.
+		 */
+		debug: led-0 {
+			label = "debug";
+			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		/*
+		 * LED14 on the PCB, left of the PX30 SoC.
+		 * Typically NOT populated.
+		 */
+		heartbeat: led-1 {
+			label = "heartbeat";
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc5v0_sys: regulator-vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_cam_avdd: regulator-vcc-cam-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_cam_avdd";
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_avdd_en>;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_2v8>;
+	};
+
+	vcc_cam_dovdd: regulator-vcc-cam-dovdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_cam_dovdd";
+		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_dovdd_en>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc_cam_dvdd: regulator-vcc-cam-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_cam_dvdd";
+		gpio = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_dvdd_en>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_lens_afvdd: regulator-vcc-lens-afvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lens_afvdd";
+		gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_afvdd_en>;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_2v8>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&csi_dphy {
+	status = "okay";
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	/*
+	 * For hs200 support, U-Boot would have to set the RK809 DCDC4
+	 * rail to 1.8V from the default of 3.0V. It doesn't do that on
+	 * devices out in the field, so disable hs200.
+	 * mmc-hs200-1_8v;
+	 */
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_emmc>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+/* I2C0 = PMIC, Touchscreen */
+&i2c0 {
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		AVDD28-supply = <&vcc_2v8>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA1 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tch_int &tch_rst>;
+		reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&vcc_3v3>;
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_3v3>;
+		vcc6-supply = <&vcc_3v3>;
+		vcc7-supply = <&vcc_3v3>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
+				regulator-name = "vcc_3v0_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_3v3: DCDC_REG5 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG3 {
+				regulator-name = "vcc_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_2v8: LDO_REG4 {
+				regulator-name = "vcc_2v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG6 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG7 {
+				regulator-name = "vcc_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8_lcd: LDO_REG8 {
+				regulator-name = "vcc_1v8_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG9 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* I2C2 = Accelerometer + Camera */
+&i2c2 {
+	/* MEMSIC MXC4005 accelerometer is rated for I2C Fast Mode (<=400KHz) */
+	/* OmniVision OV5675 camera is rated for I2C Fast Mode (<=400KHz) */
+	clock-frequency = <400000>;
+	status = "okay";
+
+	focus: focus@c {
+		compatible = "dongwoon,dw9714";
+		reg = <0xc>;
+		vcc-supply = <&vcc_lens_afvdd>;
+	};
+
+	accel@15 {
+		compatible = "memsic,mxc4005";
+		reg = <0x15>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int>;
+	};
+
+	camera@36 {
+		compatible = "ovti,ov5675";
+		reg = <0x36>;
+		clocks = <&cru SCLK_CIF_OUT>;
+		assigned-clocks = <&cru SCLK_CIF_OUT>;
+		assigned-clock-rates = <19200000>;
+		avdd-supply = <&vcc_cam_avdd>;
+		dvdd-supply = <&vcc_cam_dvdd>;
+		dovdd-supply = <&vcc_cam_dovdd>;
+		lens-focus = <&focus>;
+		orientation = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_clkout_m0 &cam_pwdn>;
+		reset-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
+		rotation = <0>;
+
+		port {
+			ucam_out: endpoint {
+				remote-endpoint = <&mipi_in_ucam>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <450000000>;
+			};
+		};
+	};
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_sdio>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_emmc>;
+	status = "okay";
+};
+
+&isp {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_in_ucam: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&ucam_out>;
+			};
+		};
+	};
+};
+
+&isp_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	accel {
+		accel_int: accel-int {
+			rockchip,pins =
+				<2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	camera {
+		cam_afvdd_en: cam-afvdd-en {
+			rockchip,pins =
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cam_avdd_en: cam-avdd-en {
+			rockchip,pins =
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cam_dovdd_en: cam-dovdd-en {
+			rockchip,pins =
+				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cam_dvdd_en: cam-dvdd-en {
+			rockchip,pins =
+				<3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cam_pwdn: cam-pwdn {
+			rockchip,pins =
+				<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins =
+				<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		debug_led_pin: debug-led-pin {
+			rockchip,pins =
+				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		heartbeat_led_pin: heartbeat-led-pin {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	panel {
+		dsp_rst: dsp-rst {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		tch_int: tch-int {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		tch_rst: tch-rst {
+			rockchip,pins =
+				<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3>;
+	pmuio2-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&uart5_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-lvds-9904379.dtso b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-lvds-9904379.dtso
new file mode 100644
index 000000000000..3fc088a5636a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-lvds-9904379.dtso
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ *
+ * HAIKOU-LVDS-9904379 adapter for PX30 Ringneck and Haikou carrierboard.
+ *
+ * This adapter needs to be plugged in the fake PCIe connector called Video
+ * Connector on Haikou carrierboard.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 255>;
+		default-brightness-level = <255>;
+		num-interpolated-steps = <255>;
+		power-supply = <&vcc3v3_baseboard>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	panel {
+		compatible = "admatec,9904379", "panel-lvds";
+		backlight = <&backlight_lvds>;
+		data-mapping = "vesa-24";
+		height-mm = <126>;
+		power-supply = <&vcc3v3_baseboard>;
+		width-mm = <224>;
+
+		panel-timing {
+			clock-frequency = <49500000>;
+			hactive = <1024>;
+			hback-porch = <90>;
+			hfront-porch = <90>;
+			hsync-len = <90>;
+			vactive = <600>;
+			vback-porch = <10>;
+			vfront-porch = <10>;
+			vsync-len = <10>;
+		};
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out_panel>;
+			};
+		};
+	};
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* EEPROM and GT928 are limited to 400KHz */
+	clock-frequency = <400000>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt928";
+		reg = <0x14>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&touch_int &touch_rst>;
+		pinctrl-names = "default";
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		AVDD28-supply = <&vcc3v3_baseboard>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+	};
+
+	eeprom@54 {
+		reg = <0x54>;
+		compatible = "st,24c04", "atmel,24c04";
+		pagesize = <16>;
+		size = <512>;
+		vcc-supply = <&vcc3v3_baseboard>;
+	};
+};
+
+&lvds {
+	status = "okay";
+};
+
+&lvds_out {
+	lvds_out_panel: endpoint {
+		remote-endpoint = <&panel_in_lvds>;
+	};
+};
+
+&pinctrl {
+	touch {
+		touch_int: touch-int {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		touch_rst: touch-rst {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso
new file mode 100644
index 000000000000..760d5139f95d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ *
+ * DEVKIT ADDON CAM-TS-A01
+ * https://embedded.cherry.de/product/development-kit/
+ *
+ * DT-overlay for the camera / DSI demo appliance for Haikou boards.
+ * In the flavour for use with a Ringneck system-on-module.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/px30-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&dc_12v>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	cam_afvdd_2v8: regulator-cam-afvdd-2v8 {
+		compatible = "regulator-fixed";
+		gpio = <&pca9670 2 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "cam-afvdd-2v8";
+		vin-supply = <&vcc2v8_video>;
+	};
+
+	cam_avdd_2v8: regulator-cam-avdd-2v8 {
+		compatible = "regulator-fixed";
+		gpio = <&pca9670 4 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "cam-avdd-2v8";
+		vin-supply = <&vcc2v8_video>;
+	};
+
+	cam_dovdd_1v8: regulator-cam-dovdd-1v8 {
+		compatible = "regulator-fixed";
+	        gpio = <&pca9670 3 GPIO_ACTIVE_LOW>;
+	        regulator-max-microvolt = <1800000>;
+	        regulator-min-microvolt = <1800000>;
+	        regulator-name = "cam-dovdd-1v8";
+	        vin-supply = <&vcc1v8_video>;
+	};
+
+	cam_dvdd_1v2: regulator-cam-dvdd-1v2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pca9670 5 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1200000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-name = "cam-dvdd-1v2";
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	vcc1v8_video: regulator-vcc1v8-video {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vcc1v8-video";
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	vcc2v8_video: regulator-vcc2v8-video {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "vcc2v8-video";
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	video-adapter-leds {
+		compatible = "gpio-leds";
+
+		video-adapter-led {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pca9670 7 GPIO_ACTIVE_HIGH>;
+			label = "video-adapter-led";
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&cif_clkout_m0 {
+	rockchip,pins =
+		<2 RK_PB3 1 &pcfg_pull_none_12ma>;
+};
+
+&csi_dphy {
+	status = "okay";
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3148w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc1v8_video>;
+		reset-gpios = <&pca9670 0 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc2v8_video>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* OV5675, GT911, DW9714 are limited to 400KHz */
+	clock-frequency = <400000>;
+
+	focus: focus@c {
+		compatible = "dongwoon,dw9714";
+		reg = <0xc>;
+		vcc-supply = <&cam_afvdd_2v8>;
+	};
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&touch_int>;
+		pinctrl-names = "default";
+		reset-gpios = <&pca9670 1 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&vcc2v8_video>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+	};
+
+	pca9670: gpio@27 {
+		compatible = "nxp,pca9670";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&pca9670_resetn>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+
+	camera@36 {
+		compatible = "ovti,ov5675";
+		reg = <0x36>;
+		clocks = <&cru SCLK_CIF_OUT>;
+		assigned-clocks = <&cru SCLK_CIF_OUT>;
+		/* Only parent to get exactly 19.2MHz */
+		assigned-clock-parents = <&cru USB480M>;
+		assigned-clock-rates = <19200000>;
+		avdd-supply = <&cam_avdd_2v8>;
+		dvdd-supply = <&cam_dvdd_1v2>;
+		dovdd-supply = <&cam_dovdd_1v8>;
+		lens-focus = <&focus>;
+		orientation = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_clkout_m0>;
+		reset-gpios = <&pca9670 6 GPIO_ACTIVE_LOW>;
+		rotation = <180>;
+
+		port {
+			cam_out: endpoint {
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <450000000>;
+				remote-endpoint = <&mipi_in_cam>;
+			};
+		};
+	};
+};
+
+&isp {
+	status = "okay";
+};
+
+&isp_in {
+	mipi_in_cam: endpoint {
+		data-lanes = <1 2>;
+		remote-endpoint = <&cam_out>;
+	};
+};
+
+&pinctrl {
+	pca9670 {
+		pca9670_resetn: pca9670-resetn {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touch {
+		touch_int: touch-int {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
index e4517f47d519..91cf4cd3fae2 100644
--- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -154,6 +154,8 @@
 };
 
 &i2c3 {
+	status = "okay";
+
 	eeprom@50 {
 		reg = <0x50>;
 		compatible = "atmel,24c01";
@@ -194,6 +196,13 @@
 			  <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	uart {
+		uart5_rts_pin: uart5-rts-pin {
+			rockchip,pins =
+			  <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm0 {
@@ -222,11 +231,15 @@
 };
 
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
 	status = "okay";
 };
 
 &uart5 {
-	pinctrl-0 = <&uart5_xfer>;
+	/* Add pinmux for rts-gpios (uart5_rts_pin) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_xfer &uart5_rts_pin>;
 	rts-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
index ae050cc6cd05..4203b335a263 100644
--- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@@ -83,9 +83,7 @@
 
 /* On-module TI DP83825I PHY but no connector, enable in carrierboard */
 &gmac {
-	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 50000 50000>;
+	phy-handle = <&dp83825>;
 	phy-supply = <&vcc_3v3>;
 	clock_in_out = "output";
 };
@@ -325,10 +323,6 @@
 	};
 };
 
-&i2c3 {
-	status = "okay";
-};
-
 &i2s0_8ch {
 	rockchip,trcm-sync-tx-only;
 
@@ -348,6 +342,18 @@
 	status = "okay";
 };
 
+&mdio {
+	dp83825: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&phy_rst>;
+		reset-assert-us = <50000>;
+		reset-deassert-us = <50000>;
+		reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &pinctrl {
 	emmc {
 		emmc_reset: emmc-reset {
@@ -355,6 +361,12 @@
 		};
 	};
 
+	ethernet {
+		phy_rst: phy-rst {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	leds {
 		module_led_pin: module-led-pin {
 			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -367,6 +379,18 @@
 				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	spi1 {
+		spi1_csn0_gpio_pin: spi1-csn0-gpio-pin {
+			rockchip,pins =
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+		};
+
+		spi1_csn1_gpio_pin: spi1-csn1-gpio-pin {
+			rockchip,pins =
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -384,6 +408,17 @@
 	vqmmc-supply = <&vccio_sd>;
 };
 
+&spi1 {
+	/*
+	 * Hardware CS has a very slow rise time of about 6us,
+	 * causing transmission errors.
+	 * With cs-gpios we have a rise time of about 20ns.
+	 */
+	cs-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>, <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_clk &spi1_csn0_gpio_pin &spi1_csn1_gpio_pin &spi1_miso &spi1_mosi>;
+};
+
 &tsadc {
 	status = "okay";
 };
@@ -396,6 +431,12 @@
 	status = "okay";
 };
 
+&uart5 {
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	pinctrl-0 = <&uart5_xfer>;
+};
+
 /* Mule UCAN */
 &usb_host0_ehci {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 9137dd76e72c..6d457da6fa03 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -351,8 +351,6 @@
 	pmugrf: syscon@ff010000 {
 		compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff010000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
 		pmu_io_domains: io-domains {
 			compatible = "rockchip,px30-pmu-io-voltage-domain";
@@ -453,8 +451,6 @@
 	grf: syscon@ff140000 {
 		compatible = "rockchip,px30-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff140000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
 		io_domains: io-domains {
 			compatible = "rockchip,px30-io-voltage-domain";
@@ -985,6 +981,12 @@
 		resets = <&cru SRST_GMAC_A>;
 		reset-names = "stmmaceth";
 		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 
 	sdmmc: mmc@ff370000 {
@@ -1131,8 +1133,6 @@
 		resets = <&cru SRST_MIPIDSI_HOST_P>;
 		reset-names = "apb";
 		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		status = "disabled";
 
 		ports {
@@ -1241,6 +1241,18 @@
 		status = "disabled";
 	};
 
+	cif: video-capture@ff490000 {
+		compatible = "rockchip,px30-vip";
+		reg = <0x0 0xff490000 0x0 0x200>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_CIF>, <&cru HCLK_CIF>, <&cru PCLK_CIF>;
+		clock-names = "aclk", "hclk", "pclk";
+		power-domains = <&power PX30_PD_VI>;
+		resets = <&cru SRST_CIF_A>, <&cru SRST_CIF_H>, <&cru SRST_CIF_PCLKIN>;
+		reset-names = "axi", "ahb", "pclkin";
+		status = "disabled";
+	};
+
 	isp: isp@ff4a0000 {
 		compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/
 		reg = <0x0 0xff4a0000 0x0 0x8000>;
@@ -1263,10 +1275,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			isp_in: port@0 {
 				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index 629121de5a13..5e7181948992 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -147,7 +147,7 @@
 
 &pwm5 {
 	status = "okay";
-	pinctrl-names = "active";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pwm5_pin_pull_down>;
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
index 7a32972bc249..c1e3098b9a7b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
@@ -35,7 +35,6 @@
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 			label = "rockpis:green:power";
-			linux,default-trigger = "default-on";
 		};
 
 		blue-led {
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts
index bd6419a5c20a..8311af4c8689 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-s0.dts
@@ -74,6 +74,23 @@
 		vin-supply = <&vcc5v0_sys>;
 	};
 
+	/*
+	 * HW revision prior to v1.2 must pull GPIO4_D6 low to access sdmmc.
+	 * This is modeled as an always-on active low fixed regulator.
+	 */
+	vcc_sd: regulator-3v3-vcc-sd {
+		compatible = "regulator-fixed";
+		gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_2030>;
+		regulator-name = "vcc_sd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
 	vcc5v0_sys: regulator-5v0-vcc-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
@@ -181,6 +198,12 @@
 		};
 	};
 
+	sdmmc {
+		sdmmc_2030: sdmmc-2030 {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	wifi {
 		wifi_reg_on: wifi-reg-on {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -233,7 +256,7 @@
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	disable-wp;
-	vmmc-supply = <&vcc_io>;
+	vmmc-supply = <&vcc_sd>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts b/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts
new file mode 100644
index 000000000000..e5e6b800c2d1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <akash@openedev.com>
+ * Copyright (c) 2019 Jagan Teki <jagan@openedev.com>
+ * Copyright (C) 2024 TheSnowfield <thesnowfield@sakurapi.org>
+ * Copyright (C) 2025 Hsun Lai <i@chainsx.cn>
+ */
+
+/dts-v1/;
+#include "rk3308.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Sakura Pi RK3308B";
+	compatible = "sakurapi,rk3308-sakurapi-rk3308b", "rockchip,rk3308";
+
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_core: regulator-vdd-core {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <827000>;
+		regulator-max-microvolt = <1340000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_log: regulator-vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: regulator-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_io: regulator-vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_phy: regulator-vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_otg: regulator-vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_32k>;
+
+	bluetooth {
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake: wifi-host-wake {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	no-mmc;
+	no-sd;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+	};
+};
+
+&sdmmc {
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+	card-detect-delay = <800>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&cru SCLK_RTC32K>;
+		clock-names = "lpo";
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_wake_bt &bt_wake_host &bt_reg_on>;
+		device-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+	};
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
index a94114fb7cc1..3566c14850c6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -184,7 +184,7 @@
 
 &gmac2phy {
 	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
-	assigned-clock-rate = <50000000>;
+	assigned-clock-rates = <50000000>;
 	assigned-clocks = <&cru SCLK_MAC2PHY>;
 	status = "okay";
 };
@@ -274,13 +274,13 @@
 
 &pwm0 {
 	pinctrl-0 = <&pwm0_pin_pull_up>;
-	pinctrl-names = "active";
+	pinctrl-names = "default";
 	status = "okay";
 };
 
 &pwm1 {
 	pinctrl-0 = <&pwm1_pin_pull_up>;
-	pinctrl-names = "active";
+	pinctrl-names = "default";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
index 150fadcb0b3c..54395a40b087 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
@@ -118,6 +118,8 @@
 };
 
 &dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	ports {
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts b/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts
index 10e6ab724ac4..4d306085646c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts
@@ -322,6 +322,8 @@
 };
 
 &dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	internal_display: panel@0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
index 446a1a6c12e7..bf4554eff47d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
@@ -220,6 +220,8 @@
 };
 
 &dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	ports {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 8dfeaf1f8eb0..30bdb38f0727 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -58,6 +58,24 @@
 		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
 		linux,rc-map-name = "rc-beelink-gs1";
 	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
 };
 
 &analog_sound {
@@ -110,7 +128,6 @@
 	phy-supply = <&vcc_io>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmiim1_pins>;
-	snps,aal;
 	snps,pbl = <0x4>;
 	tx_delay = <0x26>;
 	rx_delay = <0x11>;
@@ -326,6 +343,11 @@
 	status = "okay";
 };
 
+&spdif {
+	pinctrl-0 = <&spdifm0_tx>;
+	status = "okay";
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <0>;
 	rockchip,hw-tshut-polarity = <0>;
@@ -359,6 +381,11 @@
 	status = "okay";
 };
 
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &vop {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 3707df6acf1f..76715de886e2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -101,7 +101,7 @@
 &gmac2phy {
 	phy-supply = <&vcc_phy>;
 	clock_in_out = "output";
-	assigned-clock-rate = <50000000>;
+	assigned-clock-rates = <50000000>;
 	assigned-clocks = <&cru SCLK_MAC2PHY>;
 	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2.dtsi
index 1715d311e1f2..691d17022afb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2.dtsi
@@ -142,7 +142,6 @@
 	phy-supply = <&vcc_io_33>;
 	pinctrl-0 = <&rgmiim1_pins>;
 	pinctrl-names = "default";
-	snps,aal;
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
index 67c246ad8b8c..ec2ce894da1f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -17,8 +17,7 @@
 
 &gmac2io {
 	phy-handle = <&yt8531c>;
-	tx_delay = <0x19>;
-	rx_delay = <0x05>;
+	phy-mode = "rgmii-id";
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
index 324a8e951f7e..846b931e16d2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
@@ -15,6 +15,7 @@
 
 &gmac2io {
 	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
 	tx_delay = <0x24>;
 	rx_delay = <0x18>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
index 82021ffb0a49..09508e324a28 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
@@ -109,11 +109,9 @@
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
 	clock_in_out = "input";
-	phy-mode = "rgmii";
 	phy-supply = <&vcc_io>;
 	pinctrl-0 = <&rgmiim1_pins>;
 	pinctrl-names = "default";
-	snps,aal;
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
index 329d03172433..c0b7b98ff788 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
@@ -44,10 +44,6 @@
 	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
 };
 
-&gpu {
-	mali-supply = <&vdd_logic>;
-};
-
 &pinctrl {
 	ir {
 		ir_int: ir-int {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
index b5bd5e7d5748..7d62a3e96b19 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
@@ -84,6 +84,13 @@
 		regulator-boot-on;
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -160,6 +167,10 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_logic>;
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -300,6 +311,12 @@
 };
 
 &pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index 425de197ddb8..a4bdd87d0729 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -153,9 +153,6 @@
 	phy-supply = <&vcc_io>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmiim1_pins>;
-	snps,aal;
-	snps,rxpbl = <0x4>;
-	snps,txpbl = <0x4>;
 	tx_delay = <0x26>;
 	rx_delay = <0x11>;
 	status = "okay";
@@ -431,10 +428,18 @@
 	status = "okay";
 };
 
+&u2phy_otg {
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
 
+&usb20_otg {
+	status = "okay";
+};
+
 &usbdrd3 {
 	dr_mode = "host";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 745d3e996418..592fd8ca21df 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -144,7 +144,6 @@
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmiim1_pins>;
-	snps,force_thresh_dma_mode;
 	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
@@ -153,6 +152,10 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_logic>;
+};
+
 &hdmi {
 	avdd-0v9-supply = <&vdd_10>;
 	avdd-1v8-supply = <&vcc_18>;
@@ -344,6 +347,7 @@
 
 		/* maximum speed for Rockchip SPI */
 		spi-max-frequency = <50000000>;
+		vcc-supply = <&vcc_io>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 0597de415fe0..03b7c4313750 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -331,8 +331,14 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			power-domain@RK3328_PD_GPU {
+				reg = <RK3328_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				#power-domain-cells = <0>;
+			};
 			power-domain@RK3328_PD_HEVC {
 				reg = <RK3328_PD_HEVC>;
+				clocks = <&cru SCLK_VENC_CORE>;
 				#power-domain-cells = <0>;
 			};
 			power-domain@RK3328_PD_VIDEO {
@@ -569,9 +575,13 @@
 							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 					contribution = <4096>;
 				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
 			};
 		};
-
 	};
 
 	tsadc: tsadc@ff250000 {
@@ -588,7 +598,6 @@
 		pinctrl-2 = <&otp_pin>;
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
-		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <100000>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
@@ -650,7 +659,36 @@
 				  "ppmmu1";
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
 		clock-names = "bus", "core";
+		operating-points-v2 = <&gpu_opp_table>;
+		power-domains = <&power RK3328_PD_GPU>;
 		resets = <&cru SRST_GPU_A>;
+		#cooling-cells = <2>;
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1075000>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1075000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1075000>;
+		};
+
+		opp-500000000 {
+			/* causes stability issues */
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1150000>;
+			status = "disabled";
+		};
 	};
 
 	h265e_mmu: iommu@ff330200 {
@@ -730,11 +768,7 @@
 		status = "disabled";
 
 		vop_out: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			vop_out_hdmi: endpoint@0 {
-				reg = <0>;
+			vop_out_hdmi: endpoint {
 				remote-endpoint = <&hdmi_in_vop>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
index b99bb0a5f900..b9801a691b48 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
@@ -609,7 +609,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm4345c5";
-		interrupts-extended = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio3 RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "host-wakeup";
 		clocks = <&rk808 RK808_CLKOUT1>;
 		clock-names = "lpo";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 73618df7a889..ce4b112b082b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -140,6 +140,12 @@
 		};
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+		status = "disabled";
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
@@ -847,6 +853,31 @@
 		status = "disabled";
 	};
 
+	vop: vop@ff930000 {
+		compatible = "rockchip,rk3368-vop";
+		reg = <0x0 0xff930000 0x0 0x2fc>, <0x0 0xff931000 0x0 0x400>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		assigned-clock-rates = <400000000>, <200000000>;
+		clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3368_PD_VIO>;
+		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vop>;
+			};
+		};
+	};
+
 	vop_mmu: iommu@ff930300 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff930300 0x0 0x100>;
@@ -858,6 +889,50 @@
 		status = "disabled";
 	};
 
+	mipi_dsi: dsi@ff960000 {
+		compatible = "rockchip,rk3368-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff960000 0x0 0x4000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI_DSI0>;
+		clock-names = "pclk";
+		phys = <&dphy>;
+		phy-names = "dphy";
+		power-domains = <&power RK3368_PD_VIO>;
+		resets = <&cru SRST_MIPIDSI0>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi_in: port@0 {
+				reg = <0>;
+
+				dsi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_dsi>;
+				};
+			};
+
+			mipi_out: port@1 {
+				reg = <1>;
+			};
+
+		};
+	};
+
+	dphy: phy@ff968000 {
+		compatible = "rockchip,rk3368-dsi-dphy";
+		reg = <0x0 0xff968000 0x0 0x4000>;
+		clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_DPHYTX0>;
+		clock-names = "ref", "pclk";
+		#phy-cells = <0>;
+		resets = <&cru SRST_MIPIDPHYTX>;
+		reset-names = "apb";
+		status = "disabled";
+	};
+
 	hevc_mmu: iommu@ff9a0440 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff9a0440 0x0 0x40>,
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi
index 9d5f5b083e3c..4dcceb9136b7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi
@@ -2071,8 +2071,6 @@
 		resets = <&cru SRST_P_MIPI_DSI0>;
 		reset-names = "apb";
 		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		status = "disabled";
 
 		ports {
@@ -2112,8 +2110,6 @@
 		resets = <&cru SRST_P_MIPI_DSI1>;
 		reset-names = "apb";
 		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		#phy-cells = <0>;
 		status = "disabled";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
new file mode 100644
index 000000000000..70aee1ab904c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+
+/ {
+	model = "Rockchip RK3399 EVB IND LPDDR4 Board";
+	compatible = "rockchip,rk3399-evb-ind", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	vdd_gpu: regulator@10 {
+		compatible = "tcs,tcs4525";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1500000>;
+		regulator-min-microvolt = <712500>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc5v0_sys>;
+		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		fcs,suspend-voltage-selector = <1>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_b: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1500000>;
+		regulator-min-microvolt = <712500>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc5v0_sys>;
+		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		fcs,suspend-voltage-selector = <1>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <750000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <750000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2200000>;
+				regulator-min-microvolt = <2200000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc0v9_soc: LDO_REG3 {
+				regulator-name = "vcc0v9_soc";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1500000>;
+				regulator-min-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1500000>;
+				regulator-min-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG7 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_3v3: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcca_1v8>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1 {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2 {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 988e6ca32fac..9d07353df52c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -22,11 +22,11 @@
 	};
 
 	/* EC turns on w/ pp900_usb_en */
-	pp900_usb: pp900-ap {
+	pp900_usb: regulator-pp900-ap {
 	};
 
 	/* EC turns on w/ pp900_pcie_en */
-	pp900_pcie: pp900-ap {
+	pp900_pcie: regulator-pp900-ap {
 	};
 
 	pp3000: regulator-pp3000 {
@@ -126,7 +126,7 @@
 	};
 
 	/* Always on; plain and simple */
-	pp3000_ap: pp3000_emmc: pp3000 {
+	pp3000_ap: pp3000_emmc: regulator-pp3000 {
 	};
 
 	pp1500_ap_io: regulator-pp1500-ap-io {
@@ -160,7 +160,7 @@
 	};
 
 	/* EC turns on w/ pp3300_usb_en_l */
-	pp3300_usb: pp3300 {
+	pp3300_usb: regulator-pp3300 {
 	};
 
 	/* gpio is shared with pp1800_pcie and pinctrl is set there */
@@ -250,18 +250,11 @@
 	 */
 	assigned-clocks = <&cru PCLK_EDP>;
 	assigned-clock-rates = <24000000>;
+};
 
-	ports {
-		edp_out: port@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			edp_out_panel: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_in_edp>;
-			};
-		};
+&edp_out {
+	edp_out_panel: endpoint {
+		remote-endpoint = <&panel_in_edp>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
index 9e4b12ed62cb..be3ae473e562 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
@@ -36,6 +36,6 @@
 		compatible = "qcom,ath10k";
 		reg = <0x00000000 0x0 0x00000000 0x0 0x00000000>,
 		      <0x03000010 0x0 0x00000000 0x0 0x00200000>;
-		qcom,ath10k-calibration-variant = "GO_DUMO";
+		qcom,calibration-variant = "GO_DUMO";
 	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 19b23b438965..6aaaf0f7f73f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -92,7 +92,7 @@
 	};
 
 	/* EC turns on pp1800_s3_en */
-	pp1800_s3: pp1800 {
+	pp1800_s3: regulator-pp1800 {
 	};
 
 	/* pp3300 children, sorted by name */
@@ -109,11 +109,11 @@
 	};
 
 	/* EC turns on pp3300_s0_en */
-	pp3300_s0: pp3300 {
+	pp3300_s0: regulator-pp3300 {
 	};
 
 	/* EC turns on pp3300_s3_en */
-	pp3300_s3: pp3300 {
+	pp3300_s3: regulator-pp3300 {
 	};
 
 	/*
@@ -627,8 +627,10 @@ camera: &i2c7 {
 };
 
 &mipi_dsi {
-	status = "okay";
 	clock-master;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
 
 	ports {
 		mipi_out: port@1 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 6d9e60b01225..7eca1da78cff 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -189,39 +189,39 @@
 	};
 
 	/* EC turns on w/ pp900_ddrpll_en */
-	pp900_ddrpll: pp900-ap {
+	pp900_ddrpll: regulator-pp900-ap {
 	};
 
 	/* EC turns on w/ pp900_pll_en */
-	pp900_pll: pp900-ap {
+	pp900_pll: regulator-pp900-ap {
 	};
 
 	/* EC turns on w/ pp900_pmu_en */
-	pp900_pmu: pp900-ap {
+	pp900_pmu: regulator-pp900-ap {
 	};
 
 	/* EC turns on w/ pp1800_s0_en_l */
-	pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
+	pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: regulator-pp1800 {
 	};
 
 	/* EC turns on w/ pp1800_avdd_en_l */
-	pp1800_avdd: pp1800 {
+	pp1800_avdd: regulator-pp1800 {
 	};
 
 	/* EC turns on w/ pp1800_lid_en_l */
-	pp1800_lid: pp1800_mic: pp1800 {
+	pp1800_lid: pp1800_mic: regulator-pp1800 {
 	};
 
 	/* EC turns on w/ lpddr_pwr_en */
-	pp1800_lpddr: pp1800 {
+	pp1800_lpddr: regulator-pp1800 {
 	};
 
 	/* EC turns on w/ pp1800_pmu_en_l */
-	pp1800_pmu: pp1800 {
+	pp1800_pmu: regulator-pp1800 {
 	};
 
 	/* EC turns on w/ pp1800_usb_en_l */
-	pp1800_usb: pp1800 {
+	pp1800_usb: regulator-pp1800 {
 	};
 
 	pp3000_sd_slot: regulator-pp3000-sd-slot {
@@ -259,11 +259,11 @@
 	};
 
 	/* EC turns on w/ pp3300_trackpad_en_l */
-	pp3300_trackpad: pp3300-trackpad {
+	pp3300_trackpad: regulator-pp3300-trackpad {
 	};
 
 	/* EC turns on w/ usb_a_en */
-	pp5000_usb_a_vbus: pp5000 {
+	pp5000_usb_a_vbus: regulator-pp5000 {
 	};
 
 	ap_rtc_clk: ap-rtc-clk {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index 81c4fcb30f39..352c8efb37e0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -211,7 +211,6 @@
 	vdd_cpu_b: syr827@40 {
 		compatible = "silergy,syr827";
 		reg = <0x40>;
-		regulator-compatible = "fan53555-reg";
 		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
@@ -229,7 +228,6 @@
 	vdd_gpu: syr828@41 {
 		compatible = "silergy,syr828";
 		reg = <0x41>;
-		regulator-compatible = "fan53555-reg";
 		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
index b1c9bd0e63ef..8d94d9f91a5c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
@@ -115,7 +115,7 @@
 };
 
 &u2phy1_host {
-	status = "disabled";
+	phy-supply = <&vdd_5v>;
 };
 
 &uart0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index b169be06d4d1..c8eb5481f43d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -603,7 +603,7 @@
 };
 
 &pwm2 {
-	pinctrl-names = "active";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pwm2_pin_pull_down>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi
index c4f4f1ff6117..9da6fd82e46b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi
@@ -3,7 +3,7 @@
  * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
  */
 
-#include "rk3399.dtsi"
+#include "rk3399-base.dtsi"
 
 / {
 	cluster0_opp: opp-table-0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 5473070823cb..eaaca08a7601 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -404,18 +404,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&edp_hpd>;
 	status = "okay";
+};
 
-	ports {
-		edp_out: port@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			edp_out_panel: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_in_edp>;
-			};
-		};
+&edp_out {
+	edp_out_panel: endpoint {
+		remote-endpoint = <&panel_in_edp>;
 	};
 };
 
@@ -890,6 +883,12 @@
 		};
 	};
 
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	wireless-bluetooth {
 		bt_wake_pin: bt-wake-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -947,7 +946,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
 };
 
 &sdhci {
@@ -966,6 +977,7 @@
 		reg = <0>;
 		m25p,fast-read;
 		spi-max-frequency = <10000000>;
+		vcc-supply = <&vcc_3v0>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 04ba4c4565d0..2dca1dca20b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -104,6 +104,16 @@
 		regulator-boot-on;
 	};
 
+	avdd2v8_dvp: regulator-avdd2v8-dvp {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8_dvp";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vcc3v3_sys: regulator-vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -136,6 +146,16 @@
 		vin-supply = <&vcc3v3_sys>;
 	};
 
+	vcc1v2_dvp: regulator-vcc1v2-dvp {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2_dvp";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcca1v8_s3>;
+	};
+
 	wifi_pwrseq: sdio-wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk818 1>;
@@ -312,6 +332,8 @@
 
 			vcca1v8_codec: LDO_REG3 {
 				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
@@ -420,6 +442,67 @@
 	};
 };
 
+&i2c1 {
+	assigned-clocks = <&cru SCLK_CIF_OUT>;
+	assigned-clock-rates = <24000000>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_xfer &cif_clkouta>;
+	status = "okay";
+
+	wcam: camera@1a {
+		compatible = "sony,imx258";
+		reg = <0x1a>;
+		clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK0, derived from CIF_CLKO */
+		lens-focus = <&wcam_lens>;
+		orientation = <1>; /* V4L2_CAMERA_ORIENTATION_BACK */
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_rst_l>;
+		reset-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		/* Note: both cameras also depend on vcca1v8_codec to power the I2C bus. */
+		vif-supply = <&vcc1v8_dvp>;
+		vana-supply = <&avdd2v8_dvp>;
+		vdig-supply = <&vcc1v2_dvp>; /* DVDD_DVP is the same as VCC1V2_DVP */
+
+		port {
+			wcam_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				link-frequencies = /bits/ 64 <636000000>;
+				remote-endpoint = <&mipi_in_wcam>;
+			};
+		};
+	};
+
+	wcam_lens: camera-lens@c {
+		compatible = "dongwoon,dw9714";
+		reg = <0x0c>;
+		/* Same I2c bus as both cameras, depends on vcca1v8_codec for power. */
+		vcc-supply = <&vcc1v8_dvp>;
+	};
+
+	ucam: camera@36 {
+		compatible = "ovti,ov8858";
+		reg = <0x36>;
+		clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK1, derived from CIF_CLK0 */
+		clock-names = "xvclk";
+		dovdd-supply = <&vcc1v8_dvp>;
+		orientation = <0>; /* V4L2_CAMERA_ORIENTATION_FRONT */
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera2_rst_l &dvp_pdn0_h>;
+		powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
+		rotation = <90>;
+
+		port {
+			ucam_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&mipi_in_ucam>;
+			};
+		};
+	};
+};
+
 &i2c3 {
 	i2c-scl-rising-time-ns = <450>;
 	i2c-scl-falling-time-ns = <15>;
@@ -462,30 +545,61 @@
 	status = "okay";
 };
 
-&mipi_dsi {
+&isp0 {
 	status = "okay";
-	clock-master;
 
 	ports {
-		mipi_out: port@1 {
-			#address-cells = <0>;
-			#size-cells = <0>;
-			reg = <1>;
+		port@0 {
+			mipi_in_ucam: endpoint@0 {
+				reg = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&ucam_out>;
+			};
+		};
+	};
+};
 
-			mipi_out_panel: endpoint {
-				remote-endpoint = <&mipi_in_panel>;
+&isp0_mmu {
+	status = "okay";
+};
+
+&isp1 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_in_wcam: endpoint@0 {
+				reg = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&wcam_out>;
 			};
 		};
 	};
+};
+
+&mipi_dphy_rx0 {
+	status = "okay";
+};
+
+&isp1_mmu {
+	status = "okay";
+};
+
+&mipi_dsi {
+	clock-master;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
 
 	panel@0 {
-		compatible = "hannstar,hsd060bhw4";
+		compatible = "hannstar,hsd060bhw4", "himax,hx8394";
 		reg = <0>;
 		backlight = <&backlight>;
-		reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&vcc2v8_lcd>;
 		iovcc-supply = <&vcc1v8_lcd>;
 		pinctrl-names = "default";
+		pinctrl-0 = <&lcd1_rst_pin>;
+		reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc2v8_lcd>;
 
 		port {
 			mipi_in_panel: endpoint {
@@ -495,6 +609,16 @@
 	};
 };
 
+&mipi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
+
+&mipi_dsi1 {
+	status = "okay";
+};
+
 &pmu_io_domains {
 	pmu1830-supply = <&vcc_1v8>;
 	status = "okay";
@@ -507,6 +631,24 @@
 		};
 	};
 
+	lcd {
+		lcd1_rst_pin: lcd1-rst-pin {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cameras {
+		camera_rst_l: camera-rst-l {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		camera2_rst_l: camera2-rst-l {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		dvp_pdn0_h: dvp-pdn0-h {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	leds {
 		red_led_pin: red-led-pin {
 			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -547,6 +689,12 @@
 		};
 	};
 
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	wireless-bluetooth {
 		bt_wake_pin: bt-wake-pin {
 			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -573,7 +721,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
 };
 
 &pwm0 {
@@ -612,6 +772,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso
new file mode 100644
index 000000000000..141a921a06e4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ *
+ * DEVKIT ADDON CAM-TS-A01
+ * https://embedded.cherry.de/product/development-kit/
+ *
+ * DT-overlay for the camera / DSI demo appliance for Haikou boards.
+ * In the flavour for use with a Puma system-on-module.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rk3399-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&dc_12v>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	cam_afvdd_2v8: regulator-cam-afvdd-2v8 {
+		compatible = "regulator-fixed";
+		gpio = <&pca9670 2 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "cam-afvdd-2v8";
+		vin-supply = <&vcc2v8_video>;
+	};
+
+	cam_avdd_2v8: regulator-cam-avdd-2v8 {
+		compatible = "regulator-fixed";
+		gpio = <&pca9670 4 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "cam-avdd-2v8";
+		vin-supply = <&vcc2v8_video>;
+	};
+
+	cam_dovdd_1v8: regulator-cam-dovdd-1v8 {
+		compatible = "regulator-fixed";
+		gpio = <&pca9670 3 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "cam-dovdd-1v8";
+		vin-supply = <&vcc1v8_video>;
+	};
+
+	cam_dvdd_1v2: regulator-cam-dvdd-1v2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&pca9670 5 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1200000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-name = "cam-dvdd-1v2";
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	vcc1v8_video: regulator-vcc1v8-video {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vcc1v8-video";
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	vcc2v8_video: regulator-vcc2v8-video {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "vcc2v8-video";
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	video-adapter-leds {
+		compatible = "gpio-leds";
+
+		video-adapter-led {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pca9670 7 GPIO_ACTIVE_HIGH>;
+			label = "video-adapter-led";
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* OV5675, GT911, DW9714 are limited to 400KHz */
+	clock-frequency = <400000>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC7 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&touch_int>;
+		pinctrl-names = "default";
+		reset-gpios = <&pca9670 1 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&vcc2v8_video>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+	};
+
+	pca9670: gpio@27 {
+		compatible = "nxp,pca9670";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&pca9670_resetn>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3148w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc1v8_video>;
+		reset-gpios = <&pca9670 0 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc2v8_video>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&mipi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
+
+&pinctrl {
+	pca9670 {
+		pca9670_resetn: pca9670-resetn {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touch {
+		touch_int: touch-int {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 947bbd62a6b0..70979079923c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -149,8 +149,15 @@
 	};
 };
 
+&gmac {
+	status = "okay";
+};
+
 &hdmi {
-	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&hdmi_sound {
 	status = "okay";
 };
 
@@ -186,9 +193,22 @@
 	};
 };
 
-&i2c6 {
+&i2c7 {
+	eeprom@50 {
+		reg = <0x50>;
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		size = <128>;
+		vcc-supply = <&vcc3v3_baseboard>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s2 {
 	status = "okay";
-	clock-frequency = <400000>;
 };
 
 &pcie_phy {
@@ -292,14 +312,6 @@
 	status = "okay";
 };
 
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
 &vopb {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index d12e661dfd99..587e89d7fc5e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -60,16 +60,6 @@
 		vin-supply = <&vcc5v0_sys>;
 	};
 
-	vcc5v0_host: regulator-vcc5v0-host {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
 	vcc5v0_sys: regulator-vcc5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
@@ -182,8 +172,7 @@
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
 	tx_delay = <0x10>;
-	rx_delay = <0x10>;
-	status = "okay";
+	rx_delay = <0x23>;
 };
 
 &gpu {
@@ -389,6 +378,14 @@
 	};
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+};
+
 &i2c7 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -439,7 +436,6 @@
 	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	status = "okay";
 };
 
 /*
@@ -521,10 +517,10 @@
 		};
 	};
 
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
+	usb {
+		cy3304_reset: cy3304-reset {
 			rockchip,pins =
-			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 	};
 
@@ -589,11 +585,6 @@
 	u2phy1_otg: otg-port {
 		status = "okay";
 	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
 };
 
 &usbdrd3_1 {
@@ -603,12 +594,27 @@
 &usbdrd_dwc3_1 {
 	status = "okay";
 	dr_mode = "host";
-};
+	pinctrl-names = "default";
+	pinctrl-0 = <&cy3304_reset>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb4b4,6502", "usb4b4,6506";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&vcc1v2_phy>;
+		vdd2-supply = <&vcc3v3_sys>;
 
-&usb_host1_ehci {
-	status = "okay";
-};
+	};
 
-&usb_host1_ohci {
-	status = "okay";
+	hub_3_0: hub@2 {
+		compatible = "usb4b4,6500", "usb4b4,6504";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&vcc1v2_phy>;
+		vdd2-supply = <&vcc3v3_sys>;
+	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
index e2e9279fa267..8e3858cf988c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
@@ -112,7 +112,7 @@
 
 &i2c1 {
 	es8388: es8388@11 {
-		compatible = "everest,es8388";
+		compatible = "everest,es8388", "everest,es8328";
 		reg = <0x11>;
 		clocks = <&cru SCLK_I2S_8CH_OUT>;
 		#sound-dai-cells = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 0393da25cdfb..fc9279627ef6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -736,6 +736,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
+		vcc-supply = <&vcc3v3_sys>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
index 15da5c80d25d..74160cf89188 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
@@ -39,8 +39,8 @@
 		led-0 {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
 			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
 		};
 
 		/* USER_LED2 */
@@ -421,7 +421,6 @@
 		compatible = "silergy,syr827";
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
-		regulator-compatible = "fan53555-reg";
 		pinctrl-0 = <&vsel1_gpio>;
 		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
 		regulator-name = "vdd_cpu_b";
@@ -440,7 +439,6 @@
 		compatible = "silergy,syr828";
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
-		regulator-compatible = "fan53555-reg";
 		pinctrl-0 = <&vsel2_gpio>;
 		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
 		regulator-name = "vdd_gpu";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 541dca12bf1a..046dbe329017 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -43,7 +43,7 @@
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk808 1>;
-		clock-names = "lpo";
+		clock-names = "ext_clock";
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_enable_h>;
 		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso
new file mode 100644
index 000000000000..dabe535f2111
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 Peter Robinson <pbrobinson@gmail.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+	avdd: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd";
+		regulator-min-microvolt = <11000000>;
+		regulator-max-microvolt = <11000000>;
+		vin-supply = <&vcc3v3_s0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <5>;
+		pwms = <&pwm0 0 1000000 0>;
+		status = "okay";
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touch: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+&mipi_dsi {
+	clock-master;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mipi_panel: panel@0 {
+		compatible = "feiyang,fy07024di26a30d";
+		reg = <0>;
+		avdd-supply = <&avdd>;
+		backlight = <&backlight>;
+		dvdd-supply = <&vcc3v3_s0>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&mipi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 69a9d6170649..8b72ae6449c9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -20,15 +20,6 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
-	/* enable for panel backlight support */
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <5>;
-		pwms = <&pwm0 0 1000000 0>;
-		status = "disabled";
-	};
-
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -116,14 +107,6 @@
 		};
 	};
 
-	avdd: regulator-avdd {
-		compatible = "regulator-fixed";
-		regulator-name = "avdd";
-		regulator-min-microvolt = <11000000>;
-		regulator-max-microvolt = <11000000>;
-		vin-supply = <&vcc3v3_s0>;
-	};
-
 	vcc12v_dcin: regulator-vcc12v-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
@@ -227,6 +210,16 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
+	vcca_0v9: regulator-vcca-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vdd_log: regulator-vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
@@ -312,6 +305,8 @@
 };
 
 &hdmi {
+	avdd-0v9-supply = <&vcca_0v9>;
+	avdd-1v8-supply = <&vcc1v8_dvp>;
 	ddc-i2c-bus = <&i2c3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_cec>;
@@ -578,19 +573,6 @@
 		vbus-supply = <&vcc5v0_typec>;
 		status = "okay";
 	};
-
-	/* enable for pine64 touch screen support */
-	touch: touchscreen@5d {
-		compatible = "goodix,gt911";
-		reg = <0x5d>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
-		AVDD28-supply = <&vcc3v0_touch>;
-		VDDIO-supply = <&vcc3v0_touch>;
-		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
 };
 
 &i2s0 {
@@ -626,41 +608,13 @@
 	gpio1830-supply = <&vcc_3v0>;
 };
 
-/* enable for pine64 panel display support */
-&mipi_dsi {
-	clock-master;
-	status = "disabled";
-
-	ports {
-		mipi_out: port@1 {
-			reg = <1>;
-
-			mipi_out_panel: endpoint {
-				remote-endpoint = <&mipi_in_panel>;
-			};
-		};
-	};
-
-	mipi_panel: panel@0 {
-		compatible = "feiyang,fy07024di26a30d";
-		reg = <0>;
-		avdd-supply = <&avdd>;
-		backlight = <&backlight>;
-		dvdd-supply = <&vcc3v3_s0>;
-
-		port {
-			mipi_in_panel: endpoint {
-				remote-endpoint = <&mipi_out_panel>;
-			};
-		};
-	};
-};
-
 &pcie0 {
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_perst>;
+	vpcie0v9-supply = <&vcca_0v9>;
+	vpcie1v8-supply = <&vcca_1v8>;
 	vpcie12v-supply = <&vcc12v_dcin>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
 	status = "okay";
@@ -768,10 +722,6 @@
 	};
 };
 
-&pwm0 {
-	status = "okay";
-};
-
 &pwm1 {
 	status = "okay";
 };
@@ -836,6 +786,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
+		vcc-supply = <&vcc_3v0>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index fdaa8472b7a7..a4ceafe6dd7a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -142,21 +142,13 @@
 
 &edp {
 	status = "okay";
+};
 
-	ports {
-		edp_out: port@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			edp_out_panel: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_in_edp>;
-			};
-		};
+&edp_out {
+	edp_out_panel: endpoint {
+		remote-endpoint = <&panel_in_edp>;
 	};
 };
-
 &i2c1 {
 	i2c-scl-rising-time-ns = <300>;
 	i2c-scl-falling-time-ns = <15>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts b/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts
new file mode 100644
index 000000000000..6e21579365a5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+	model = "ArmSoM Sige1";
+	compatible = "armsom,sige1", "rockchip,rk3528";
+
+	aliases {
+		ethernet0 = &gmac1;
+		i2c0 = &i2c0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio0;
+		serial0 = &uart0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "MASKROM";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&g_led>, <&r_led>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "on";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vcc0v6_ddr: regulator-0v6-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v6_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <600000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_0v9: regulator-0v9-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: regulator-1v1-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: regulator-1v8-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc1v8_ddr: regulator-1v8-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_3v3: regulator-3v3-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_dcin>;
+	};
+
+	vcc3v3_sd: regulator-3v3-vcc-sd {
+		compatible = "regulator-fixed";
+		gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren_l>;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_sys: regulator-5v0-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_dcin>;
+	};
+
+	vcc5v0_usb1_host: regulator-5v0-vcc-usb1-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host1_drv_h>;
+		regulator-name = "vcc5v0_usb1_host";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host2_drv_h>;
+		regulator-name = "vcc5v0_usb2_host";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_otg0_drv_h>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_dcin: regulator-vcc-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccio_sd: regulator-vccio-sd {
+		compatible = "regulator-gpio";
+		gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>, <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_arm";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <746000>;
+		regulator-max-microvolt = <1201000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_logic";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <705000>;
+		regulator-max-microvolt = <1006000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>, <&clkm1_32k_out>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m0_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int_l>;
+		wakeup-source;
+	};
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rstn_l>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	bluetooth {
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_h: bt-wake-host-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt_h: host-wake-bt-h {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		gmac1_rstn_l: gmac1-rstn-l {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		g_led: g-led {
+			rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		r_led: r-led {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtc {
+		rtc_int_l: rtc-int-l {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sdmmc_pwren_l: sdmmc-pwren-l {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb20_host1_drv_h: usb20-host1-drv-h {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb20_host2_drv_h: usb20-host2-drv-h {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb20_otg0_drv_h: usb20-otg0-drv-h {
+			rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_wake_host_h: wifi-wake-host-h {
+			rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3m0_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
+	non-removable;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		clocks = <&cru CLK_DEEPSLOW>;
+		clock-names = "lpo";
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_wake_host_h>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+&uart2 {
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>, <&uart2m1_ctsn>, <&uart2m1_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&cru CLK_DEEPSLOW>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h>, <&bt_wake_host_h>, <&host_wake_bt_h>;
+		shutdown-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
new file mode 100644
index 000000000000..9f683033c5f3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi Zero2";
+	compatible = "friendlyarm,nanopi-zero2", "rockchip,rk3528";
+
+	aliases {
+		ethernet0 = &gmac1;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "MASK";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	adc-keys-1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "RECOVERY";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led1>, <&led_sys>;
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vcc0v6_ddr: regulator-0v6-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v6_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <600000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_0v9: regulator-0v9-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: regulator-1v1-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: regulator-1v8-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-3v3-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sd: regulator-3v3-vcc-sd {
+		compatible = "regulator-fixed";
+		gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren_l>;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_sys: regulator-5v0-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	usb2_host_5v: regulator-5v0-usb2-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host1_pwren>;
+		regulator-name = "usb2_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vccio_sd: regulator-vccio-sd {
+		compatible = "regulator-gpio";
+		gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>, <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_arm";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <746000>;
+		regulator-max-microvolt = <1201000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_logic";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <705000>;
+		regulator-max-microvolt = <1006000>;
+		regulator-settling-time-up-us = <250>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m0_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int_l>;
+		wakeup-source;
+	};
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rstn_l>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		gmac1_rstn_l: gmac1-rstn-l {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led1: led1 {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_sys: led-sys {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtc {
+		rtc_int_l: rtc-int-l {
+			rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sdmmc_pwren_l: sdmmc-pwren-l {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb20_host1_pwren: usb20-host1-pwren {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1m0_pins>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi
new file mode 100644
index 000000000000..59b75c91bbb7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi
@@ -0,0 +1,1397 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	arm {
+		/omit-if-no-ref/
+		arm_pins: arm-pins {
+			rockchip,pins =
+				/* arm_avs */
+				<4 RK_PC4 3 &pcfg_pull_none>;
+		};
+	};
+
+	clk {
+		/omit-if-no-ref/
+		clkm0_32k_out: clkm0-32k-out {
+			rockchip,pins =
+				/* clkm0_32k_out */
+				<3 RK_PC3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		clkm1_32k_out: clkm1-32k-out {
+			rockchip,pins =
+				/* clkm1_32k_out */
+				<1 RK_PC3 1 &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		/omit-if-no-ref/
+		emmc_rstnout: emmc-rstnout {
+			rockchip,pins =
+				/* emmc_rstn */
+				<1 RK_PD6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins =
+				/* emmc_d0 */
+				<1 RK_PC4 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d1 */
+				<1 RK_PC5 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d2 */
+				<1 RK_PC6 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d3 */
+				<1 RK_PC7 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d4 */
+				<1 RK_PD0 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d5 */
+				<1 RK_PD1 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d6 */
+				<1 RK_PD2 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d7 */
+				<1 RK_PD3 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_clk: emmc-clk {
+			rockchip,pins =
+				/* emmc_clk */
+				<1 RK_PD5 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_cmd: emmc-cmd {
+			rockchip,pins =
+				/* emmc_cmd */
+				<1 RK_PD4 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_strb: emmc-strb {
+			rockchip,pins =
+				/* emmc_strb */
+				<1 RK_PD7 1 &pcfg_pull_none>;
+		};
+	};
+
+	eth {
+		/omit-if-no-ref/
+		eth_pins: eth-pins {
+			rockchip,pins =
+				/* eth_clk_25m_out */
+				<3 RK_PB5 2 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	fephy {
+		/omit-if-no-ref/
+		fephym0_led_dpx: fephym0-led-dpx {
+			rockchip,pins =
+				/* fephy_led_dpx_m0 */
+				<4 RK_PB5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		fephym0_led_link: fephym0-led-link {
+			rockchip,pins =
+				/* fephy_led_link_m0 */
+				<4 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		fephym0_led_spd: fephym0-led-spd {
+			rockchip,pins =
+				/* fephy_led_spd_m0 */
+				<4 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		fephym1_led_dpx: fephym1-led-dpx {
+			rockchip,pins =
+				/* fephy_led_dpx_m1 */
+				<2 RK_PA4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		fephym1_led_link: fephym1-led-link {
+			rockchip,pins =
+				/* fephy_led_link_m1 */
+				<2 RK_PA6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		fephym1_led_spd: fephym1-led-spd {
+			rockchip,pins =
+				/* fephy_led_spd_m1 */
+				<2 RK_PA5 5 &pcfg_pull_none>;
+		};
+	};
+
+	fspi {
+		/omit-if-no-ref/
+		fspi_pins: fspi-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PD5 2 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PC4 2 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PC5 2 &pcfg_pull_none>,
+				/* fspi_d2 */
+				<1 RK_PC6 2 &pcfg_pull_none>,
+				/* fspi_d3 */
+				<1 RK_PC7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		fspi_csn0: fspi-csn0 {
+			rockchip,pins =
+				/* fspi_csn0 */
+				<1 RK_PD0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		fspi_csn1: fspi-csn1 {
+			rockchip,pins =
+				/* fspi_csn1 */
+				<1 RK_PD1 2 &pcfg_pull_none>;
+		};
+	};
+
+	gpu {
+		/omit-if-no-ref/
+		gpu_pins: gpu-pins {
+			rockchip,pins =
+				/* gpu_avs */
+				<4 RK_PC3 3 &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		/omit-if-no-ref/
+		hdmi_pins: hdmi-pins {
+			rockchip,pins =
+				/* hdmi_tx_cec */
+				<0 RK_PA3 1 &pcfg_pull_none>,
+				/* hdmi_tx_hpd */
+				<0 RK_PA2 1 &pcfg_pull_none>,
+				/* hdmi_tx_scl */
+				<0 RK_PA4 1 &pcfg_pull_none>,
+				/* hdmi_tx_sda */
+				<0 RK_PA5 1 &pcfg_pull_none>;
+		};
+	};
+
+	hsm {
+		/omit-if-no-ref/
+		hsmm0_pins: hsmm0-pins {
+			rockchip,pins =
+				/* hsm_clk_out_m0 */
+				<2 RK_PA2 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hsmm1_pins: hsmm1-pins {
+			rockchip,pins =
+				/* hsm_clk_out_m1 */
+				<1 RK_PA4 3 &pcfg_pull_none>;
+		};
+	};
+
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0m0_xfer: i2c0m0-xfer {
+			rockchip,pins =
+				/* i2c0_scl_m0 */
+				<4 RK_PC4 2 &pcfg_pull_none_smt>,
+				/* i2c0_sda_m0 */
+				<4 RK_PC3 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c0m1_xfer: i2c0m1-xfer {
+			rockchip,pins =
+				/* i2c0_scl_m1 */
+				<4 RK_PA1 2 &pcfg_pull_none_smt>,
+				/* i2c0_sda_m1 */
+				<4 RK_PA0 2 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c1 {
+		/omit-if-no-ref/
+		i2c1m0_xfer: i2c1m0-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m0 */
+				<4 RK_PA3 2 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m0 */
+				<4 RK_PA2 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m1_xfer: i2c1m1-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m1 */
+				<4 RK_PC5 4 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m1 */
+				<4 RK_PC6 4 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2m0_xfer: i2c2m0-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m0 */
+				<0 RK_PA4 2 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m0 */
+				<0 RK_PA5 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m1_xfer: i2c2m1-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m1 */
+				<1 RK_PA5 3 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m1 */
+				<1 RK_PA6 3 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c3 {
+		/omit-if-no-ref/
+		i2c3m0_xfer: i2c3m0-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m0 */
+				<1 RK_PA0 2 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m0 */
+				<1 RK_PA1 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m1_xfer: i2c3m1-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m1 */
+				<3 RK_PC1 5 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m1 */
+				<3 RK_PC3 5 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c4 {
+		/omit-if-no-ref/
+		i2c4_xfer: i2c4-xfer {
+			rockchip,pins =
+				/* i2c4_scl */
+				<2 RK_PA0 4 &pcfg_pull_none_smt>,
+				/* i2c4_sda */
+				<2 RK_PA1 4 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c5 {
+		/omit-if-no-ref/
+		i2c5m0_xfer: i2c5m0-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m0 */
+				<1 RK_PB2 3 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m0 */
+				<1 RK_PB3 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m1_xfer: i2c5m1-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m1 */
+				<1 RK_PD2 3 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m1 */
+				<1 RK_PD3 3 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c6 {
+		/omit-if-no-ref/
+		i2c6m0_xfer: i2c6m0-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m0 */
+				<3 RK_PB2 5 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m0 */
+				<3 RK_PB3 5 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c6m1_xfer: i2c6m1-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m1 */
+				<1 RK_PD4 3 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m1 */
+				<1 RK_PD7 3 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c7 {
+		/omit-if-no-ref/
+		i2c7_xfer: i2c7-xfer {
+			rockchip,pins =
+				/* i2c7_scl */
+				<2 RK_PA5 4 &pcfg_pull_none_smt>,
+				/* i2c7_sda */
+				<2 RK_PA6 4 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2s0 {
+		/omit-if-no-ref/
+		i2s0m0_lrck: i2s0m0-lrck {
+			rockchip,pins =
+				/* i2s0_lrck_m0 */
+				<3 RK_PB6 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_mclk: i2s0m0-mclk {
+			rockchip,pins =
+				/* i2s0_mclk_m0 */
+				<3 RK_PB4 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sclk: i2s0m0-sclk {
+			rockchip,pins =
+				/* i2s0_sclk_m0 */
+				<3 RK_PB5 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdi: i2s0m0-sdi {
+			rockchip,pins =
+				/* i2s0m0_sdi */
+				<3 RK_PB7 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		i2s0m0_sdo: i2s0m0-sdo {
+			rockchip,pins =
+				/* i2s0m0_sdo */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_lrck: i2s0m1-lrck {
+			rockchip,pins =
+				/* i2s0_lrck_m1 */
+				<1 RK_PB6 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_mclk: i2s0m1-mclk {
+			rockchip,pins =
+				/* i2s0_mclk_m1 */
+				<1 RK_PB4 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sclk: i2s0m1-sclk {
+			rockchip,pins =
+				/* i2s0_sclk_m1 */
+				<1 RK_PB5 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdi: i2s0m1-sdi {
+			rockchip,pins =
+				/* i2s0m1_sdi */
+				<1 RK_PB7 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		i2s0m1_sdo: i2s0m1-sdo {
+			rockchip,pins =
+				/* i2s0m1_sdo */
+				<1 RK_PC0 1 &pcfg_pull_none>;
+		};
+	};
+
+	i2s1 {
+		/omit-if-no-ref/
+		i2s1_lrck: i2s1-lrck {
+			rockchip,pins =
+				/* i2s1_lrck */
+				<4 RK_PA6 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1_mclk: i2s1-mclk {
+			rockchip,pins =
+				/* i2s1_mclk */
+				<4 RK_PA4 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1_sclk: i2s1-sclk {
+			rockchip,pins =
+				/* i2s1_sclk */
+				<4 RK_PA5 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1_sdi0: i2s1-sdi0 {
+			rockchip,pins =
+				/* i2s1_sdi0 */
+				<4 RK_PB4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1_sdi1: i2s1-sdi1 {
+			rockchip,pins =
+				/* i2s1_sdi1 */
+				<4 RK_PB3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1_sdi2: i2s1-sdi2 {
+			rockchip,pins =
+				/* i2s1_sdi2 */
+				<4 RK_PA3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1_sdi3: i2s1-sdi3 {
+			rockchip,pins =
+				/* i2s1_sdi3 */
+				<4 RK_PA2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1_sdo0: i2s1-sdo0 {
+			rockchip,pins =
+				/* i2s1_sdo0 */
+				<4 RK_PA7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1_sdo1: i2s1-sdo1 {
+			rockchip,pins =
+				/* i2s1_sdo1 */
+				<4 RK_PB0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1_sdo2: i2s1-sdo2 {
+			rockchip,pins =
+				/* i2s1_sdo2 */
+				<4 RK_PB1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1_sdo3: i2s1-sdo3 {
+			rockchip,pins =
+				/* i2s1_sdo3 */
+				<4 RK_PB2 1 &pcfg_pull_none>;
+		};
+	};
+
+	jtag {
+		/omit-if-no-ref/
+		jtagm0_pins: jtagm0-pins {
+			rockchip,pins =
+				/* jtag_cpu_tck_m0 */
+				<2 RK_PA2 2 &pcfg_pull_none>,
+				/* jtag_cpu_tms_m0 */
+				<2 RK_PA3 2 &pcfg_pull_none>,
+				/* jtag_mcu_tck_m0 */
+				<2 RK_PA4 2 &pcfg_pull_none>,
+				/* jtag_mcu_tms_m0 */
+				<2 RK_PA5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		jtagm1_pins: jtagm1-pins {
+			rockchip,pins =
+				/* jtag_cpu_tck_m1 */
+				<4 RK_PD0 2 &pcfg_pull_none>,
+				/* jtag_cpu_tms_m1 */
+				<4 RK_PC7 2 &pcfg_pull_none>,
+				/* jtag_mcu_tck_m1 */
+				<4 RK_PD0 3 &pcfg_pull_none>,
+				/* jtag_mcu_tms_m1 */
+				<4 RK_PC7 3 &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		/omit-if-no-ref/
+		pciem0_pins: pciem0-pins {
+			rockchip,pins =
+				/* pcie_clkreqn_m0 */
+				<3 RK_PA6 5 &pcfg_pull_none>,
+				/* pcie_perstn_m0 */
+				<3 RK_PB0 5 &pcfg_pull_none>,
+				/* pcie_waken_m0 */
+				<3 RK_PA7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pciem1_pins: pciem1-pins {
+			rockchip,pins =
+				/* pcie_clkreqn_m1 */
+				<1 RK_PA0 4 &pcfg_pull_none>,
+				/* pcie_perstn_m1 */
+				<1 RK_PA2 4 &pcfg_pull_none>,
+				/* pcie_waken_m1 */
+				<1 RK_PA1 4 &pcfg_pull_none>;
+		};
+	};
+
+	pdm {
+		/omit-if-no-ref/
+		pdm_clk0: pdm-clk0 {
+			rockchip,pins =
+				/* pdm_clk0 */
+				<4 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm_clk1: pdm-clk1 {
+			rockchip,pins =
+				/* pdm_clk1 */
+				<4 RK_PA4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm_sdi0: pdm-sdi0 {
+			rockchip,pins =
+				/* pdm_sdi0 */
+				<4 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm_sdi1: pdm-sdi1 {
+			rockchip,pins =
+				/* pdm_sdi1 */
+				<4 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm_sdi2: pdm-sdi2 {
+			rockchip,pins =
+				/* pdm_sdi2 */
+				<4 RK_PB3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm_sdi3: pdm-sdi3 {
+			rockchip,pins =
+				/* pdm_sdi3 */
+				<4 RK_PC1 3 &pcfg_pull_none>;
+		};
+	};
+
+	pmu {
+		/omit-if-no-ref/
+		pmu_pins: pmu-pins {
+			rockchip,pins =
+				/* pmu_debug */
+				<4 RK_PA0 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm0 {
+		/omit-if-no-ref/
+		pwm0m0_pins: pwm0m0-pins {
+			rockchip,pins =
+				/* pwm0_m0 */
+				<4 RK_PC3 1 &pcfg_pull_none_drv_level_0>;
+		};
+
+		/omit-if-no-ref/
+		pwm0m1_pins: pwm0m1-pins {
+			rockchip,pins =
+				/* pwm0_m1 */
+				<1 RK_PA2 5 &pcfg_pull_none_drv_level_0>;
+		};
+	};
+
+	pwm1 {
+		/omit-if-no-ref/
+		pwm1m0_pins: pwm1m0-pins {
+			rockchip,pins =
+				/* pwm1_m0 */
+				<4 RK_PC4 1 &pcfg_pull_none_drv_level_0>;
+		};
+
+		/omit-if-no-ref/
+		pwm1m1_pins: pwm1m1-pins {
+			rockchip,pins =
+				/* pwm1_m1 */
+				<1 RK_PA3 4 &pcfg_pull_none_drv_level_0>;
+		};
+	};
+
+	pwm2 {
+		/omit-if-no-ref/
+		pwm2m0_pins: pwm2m0-pins {
+			rockchip,pins =
+				/* pwm2_m0 */
+				<4 RK_PC5 1 &pcfg_pull_none_drv_level_0>;
+		};
+
+		/omit-if-no-ref/
+		pwm2m1_pins: pwm2m1-pins {
+			rockchip,pins =
+				/* pwm2_m1 */
+				<1 RK_PA7 2 &pcfg_pull_none_drv_level_0>;
+		};
+	};
+
+	pwm3 {
+		/omit-if-no-ref/
+		pwm3m0_pins: pwm3m0-pins {
+			rockchip,pins =
+				/* pwm3_m0 */
+				<4 RK_PC6 1 &pcfg_pull_none_drv_level_0>;
+		};
+
+		/omit-if-no-ref/
+		pwm3m1_pins: pwm3m1-pins {
+			rockchip,pins =
+				/* pwm3_m1 */
+				<2 RK_PA4 3 &pcfg_pull_none_drv_level_0>;
+		};
+	};
+
+	pwm4 {
+		/omit-if-no-ref/
+		pwm4m0_pins: pwm4m0-pins {
+			rockchip,pins =
+				/* pwm4_m0 */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_0>;
+		};
+
+		/omit-if-no-ref/
+		pwm4m1_pins: pwm4m1-pins {
+			rockchip,pins =
+				/* pwm4_m1 */
+				<1 RK_PA4 2 &pcfg_pull_none_drv_level_0>;
+		};
+	};
+
+	pwm5 {
+		/omit-if-no-ref/
+		pwm5m0_pins: pwm5m0-pins {
+			rockchip,pins =
+				/* pwm5_m0 */
+				<4 RK_PC0 1 &pcfg_pull_none_drv_level_0>;
+		};
+
+		/omit-if-no-ref/
+		pwm5m1_pins: pwm5m1-pins {
+			rockchip,pins =
+				/* pwm5_m1 */
+				<3 RK_PC3 1 &pcfg_pull_none_drv_level_0>;
+		};
+	};
+
+	pwm6 {
+		/omit-if-no-ref/
+		pwm6m0_pins: pwm6m0-pins {
+			rockchip,pins =
+				/* pwm6_m0 */
+				<4 RK_PC1 1 &pcfg_pull_none_drv_level_0>;
+		};
+
+		/omit-if-no-ref/
+		pwm6m1_pins: pwm6m1-pins {
+			rockchip,pins =
+				/* pwm6_m1 */
+				<1 RK_PC3 3 &pcfg_pull_none_drv_level_0>;
+		};
+
+		/omit-if-no-ref/
+		pwm6m2_pins: pwm6m2-pins {
+			rockchip,pins =
+				/* pwm6_m2 */
+				<3 RK_PC1 1 &pcfg_pull_none_drv_level_0>;
+		};
+	};
+
+	pwm7 {
+		/omit-if-no-ref/
+		pwm7m0_pins: pwm7m0-pins {
+			rockchip,pins =
+				/* pwm7_m0 */
+				<4 RK_PC2 1 &pcfg_pull_none_drv_level_0>;
+		};
+
+		/omit-if-no-ref/
+		pwm7m1_pins: pwm7m1-pins {
+			rockchip,pins =
+				/* pwm7_m1 */
+				<1 RK_PC2 2 &pcfg_pull_none_drv_level_0>;
+		};
+	};
+
+	pwr {
+		/omit-if-no-ref/
+		pwr_pins: pwr-pins {
+			rockchip,pins =
+				/* pwr_ctrl0 */
+				<4 RK_PC2 2 &pcfg_pull_none>,
+				/* pwr_ctrl1 */
+				<4 RK_PB6 1 &pcfg_pull_none>;
+		};
+	};
+
+	ref {
+		/omit-if-no-ref/
+		refm0_pins: refm0-pins {
+			rockchip,pins =
+				/* ref_clk_out_m0 */
+				<0 RK_PA1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		refm1_pins: refm1-pins {
+			rockchip,pins =
+				/* ref_clk_out_m1 */
+				<3 RK_PC3 6 &pcfg_pull_none>;
+		};
+	};
+
+	rgmii {
+		/omit-if-no-ref/
+		rgmii_miim: rgmii-miim {
+			rockchip,pins =
+				/* rgmii_mdc */
+				<3 RK_PB6 2 &pcfg_pull_none_drv_level_2>,
+				/* rgmii_mdio */
+				<3 RK_PB7 2 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		rgmii_rx_bus2: rgmii-rx-bus2 {
+			rockchip,pins =
+				/* rgmii_rxd0 */
+				<3 RK_PA3 2 &pcfg_pull_none>,
+				/* rgmii_rxd1 */
+				<3 RK_PA2 2 &pcfg_pull_none>,
+				/* rgmii_rxdv_crs */
+				<3 RK_PC2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmii_tx_bus2: rgmii-tx-bus2 {
+			rockchip,pins =
+				/* rgmii_txd0 */
+				<3 RK_PA1 2 &pcfg_pull_none_drv_level_2>,
+				/* rgmii_txd1 */
+				<3 RK_PA0 2 &pcfg_pull_none_drv_level_2>,
+				/* rgmii_txen */
+				<3 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmii_rgmii_clk: rgmii-rgmii-clk {
+			rockchip,pins =
+				/* rgmii_rxclk */
+				<3 RK_PA5 2 &pcfg_pull_none>,
+				/* rgmii_txclk */
+				<3 RK_PA4 2 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		rgmii_rgmii_bus: rgmii-rgmii-bus {
+			rockchip,pins =
+				/* rgmii_rxd2 */
+				<3 RK_PA7 2 &pcfg_pull_none>,
+				/* rgmii_rxd3 */
+				<3 RK_PA6 2 &pcfg_pull_none>,
+				/* rgmii_txd2 */
+				<3 RK_PB1 2 &pcfg_pull_none_drv_level_2>,
+				/* rgmii_txd3 */
+				<3 RK_PB0 2 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		rgmii_clk: rgmii-clk {
+			rockchip,pins =
+				/* rgmii_clk */
+				<3 RK_PB4 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		rgmii_txer: rgmii-txer {
+			rockchip,pins =
+				/* rgmii_txer */
+				<3 RK_PC1 2 &pcfg_pull_none>;
+		};
+	};
+
+	scr {
+		/omit-if-no-ref/
+		scrm0_pins: scrm0-pins {
+			rockchip,pins =
+				/* scr_clk_m0 */
+				<1 RK_PA2 3 &pcfg_pull_none>,
+				/* scr_data_m0 */
+				<1 RK_PA1 3 &pcfg_pull_none>,
+				/* scr_detn_m0 */
+				<1 RK_PA0 3 &pcfg_pull_none>,
+				/* scr_rstn_m0 */
+				<1 RK_PA3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		scrm1_pins: scrm1-pins {
+			rockchip,pins =
+				/* scr_clk_m1 */
+				<2 RK_PA5 3 &pcfg_pull_none>,
+				/* scr_data_m1 */
+				<2 RK_PA3 4 &pcfg_pull_none>,
+				/* scr_detn_m1 */
+				<2 RK_PA6 3 &pcfg_pull_none>,
+				/* scr_rstn_m1 */
+				<2 RK_PA4 4 &pcfg_pull_none>;
+		};
+	};
+
+	sdio0 {
+		/omit-if-no-ref/
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins =
+				/* sdio0_d0 */
+				<1 RK_PA0 1 &pcfg_pull_up_drv_level_2>,
+				/* sdio0_d1 */
+				<1 RK_PA1 1 &pcfg_pull_up_drv_level_2>,
+				/* sdio0_d2 */
+				<1 RK_PA2 1 &pcfg_pull_up_drv_level_2>,
+				/* sdio0_d3 */
+				<1 RK_PA3 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdio0_clk: sdio0-clk {
+			rockchip,pins =
+				/* sdio0_clk */
+				<1 RK_PA5 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins =
+				/* sdio0_cmd */
+				<1 RK_PA4 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdio0_det: sdio0-det {
+			rockchip,pins =
+				/* sdio0_det */
+				<1 RK_PA6 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdio0_pwren: sdio0-pwren {
+			rockchip,pins =
+				/* sdio0_pwren */
+				<1 RK_PA7 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdio1 {
+		/omit-if-no-ref/
+		sdio1_bus4: sdio1-bus4 {
+			rockchip,pins =
+				/* sdio1_d0 */
+				<3 RK_PA6 1 &pcfg_pull_up_drv_level_2>,
+				/* sdio1_d1 */
+				<3 RK_PA7 1 &pcfg_pull_up_drv_level_2>,
+				/* sdio1_d2 */
+				<3 RK_PB0 1 &pcfg_pull_up_drv_level_2>,
+				/* sdio1_d3 */
+				<3 RK_PB1 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdio1_clk: sdio1-clk {
+			rockchip,pins =
+				/* sdio1_clk */
+				<3 RK_PA4 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdio1_cmd: sdio1-cmd {
+			rockchip,pins =
+				/* sdio1_cmd */
+				<3 RK_PA5 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdio1_det: sdio1-det {
+			rockchip,pins =
+				/* sdio1_det */
+				<3 RK_PB3 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdio1_pwren: sdio1-pwren {
+			rockchip,pins =
+				/* sdio1_pwren */
+				<3 RK_PB2 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/omit-if-no-ref/
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				/* sdmmc_d0 */
+				<2 RK_PA0 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc_d1 */
+				<2 RK_PA1 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc_d2 */
+				<2 RK_PA2 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc_d3 */
+				<2 RK_PA3 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				/* sdmmc_clk */
+				<2 RK_PA5 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				/* sdmmc_cmd */
+				<2 RK_PA4 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_det: sdmmc-det {
+			rockchip,pins =
+				/* sdmmc_detn */
+				<2 RK_PA6 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_pwren: sdmmc-pwren {
+			rockchip,pins =
+				/* sdmmc_pwren */
+				<4 RK_PA1 1 &pcfg_pull_none>;
+		};
+	};
+
+	spdif {
+		/omit-if-no-ref/
+		spdifm0_pins: spdifm0-pins {
+			rockchip,pins =
+				/* spdif_tx_m0 */
+				<4 RK_PA0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdifm1_pins: spdifm1-pins {
+			rockchip,pins =
+				/* spdif_tx_m1 */
+				<1 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdifm2_pins: spdifm2-pins {
+			rockchip,pins =
+				/* spdif_tx_m2 */
+				<3 RK_PC3 2 &pcfg_pull_none>;
+		};
+	};
+
+	spi0 {
+		/omit-if-no-ref/
+		spi0_pins: spi0-pins {
+			rockchip,pins =
+				/* spi0_clk */
+				<4 RK_PB4 2 &pcfg_pull_none_drv_level_2>,
+				/* spi0_miso */
+				<4 RK_PB3 2 &pcfg_pull_none_drv_level_2>,
+				/* spi0_mosi */
+				<4 RK_PB2 2 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		spi0_csn0: spi0-csn0 {
+			rockchip,pins =
+				/* spi0_csn0 */
+				<4 RK_PB6 2 &pcfg_pull_none_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		spi0_csn1: spi0-csn1 {
+			rockchip,pins =
+				/* spi0_csn1 */
+				<4 RK_PC1 2 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	spi1 {
+		/omit-if-no-ref/
+		spi1_pins: spi1-pins {
+			rockchip,pins =
+				/* spi1_clk */
+				<1 RK_PB6 2 &pcfg_pull_none_drv_level_2>,
+				/* spi1_miso */
+				<1 RK_PC0 2 &pcfg_pull_none_drv_level_2>,
+				/* spi1_mosi */
+				<1 RK_PB7 2 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		spi1_csn0: spi1-csn0 {
+			rockchip,pins =
+				/* spi1_csn0 */
+				<1 RK_PC1 1 &pcfg_pull_none_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		spi1_csn1: spi1-csn1 {
+			rockchip,pins =
+				/* spi1_csn1 */
+				<1 RK_PC2 1 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	tsi0 {
+		/omit-if-no-ref/
+		tsi0_pins: tsi0-pins {
+			rockchip,pins =
+				/* tsi0_clkin */
+				<3 RK_PB2 3 &pcfg_pull_none>,
+				/* tsi0_d0 */
+				<3 RK_PB1 3 &pcfg_pull_none>,
+				/* tsi0_d1 */
+				<3 RK_PB5 3 &pcfg_pull_none>,
+				/* tsi0_d2 */
+				<3 RK_PB6 3 &pcfg_pull_none>,
+				/* tsi0_d3 */
+				<3 RK_PB7 3 &pcfg_pull_none>,
+				/* tsi0_d4 */
+				<3 RK_PA3 3 &pcfg_pull_none>,
+				/* tsi0_d5 */
+				<3 RK_PA2 3 &pcfg_pull_none>,
+				/* tsi0_d6 */
+				<3 RK_PA1 3 &pcfg_pull_none>,
+				/* tsi0_d7 */
+				<3 RK_PA0 3 &pcfg_pull_none>,
+				/* tsi0_fail */
+				<3 RK_PC0 3 &pcfg_pull_none>,
+				/* tsi0_sync */
+				<3 RK_PB4 3 &pcfg_pull_none>,
+				/* tsi0_valid */
+				<3 RK_PB3 3 &pcfg_pull_none>;
+		};
+	};
+
+	tsi1 {
+		/omit-if-no-ref/
+		tsi1_pins: tsi1-pins {
+			rockchip,pins =
+				/* tsi1_clkin */
+				<3 RK_PA5 3 &pcfg_pull_none>,
+				/* tsi1_d0 */
+				<3 RK_PA4 3 &pcfg_pull_none>,
+				/* tsi1_sync */
+				<3 RK_PA7 3 &pcfg_pull_none>,
+				/* tsi1_valid */
+				<3 RK_PA6 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart0 {
+		/omit-if-no-ref/
+		uart0m0_xfer: uart0m0-xfer {
+			rockchip,pins =
+				/* uart0_rx_m0 */
+				<4 RK_PC7 1 &pcfg_pull_up>,
+				/* uart0_tx_m0 */
+				<4 RK_PD0 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0m1_xfer: uart0m1-xfer {
+			rockchip,pins =
+				/* uart0_rx_m1 */
+				<2 RK_PA0 2 &pcfg_pull_up>,
+				/* uart0_tx_m1 */
+				<2 RK_PA1 2 &pcfg_pull_up>;
+		};
+	};
+
+	uart1 {
+		/omit-if-no-ref/
+		uart1m0_xfer: uart1m0-xfer {
+			rockchip,pins =
+				/* uart1_rx_m0 */
+				<4 RK_PA7 2 &pcfg_pull_up>,
+				/* uart1_tx_m0 */
+				<4 RK_PA6 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_xfer: uart1m1-xfer {
+			rockchip,pins =
+				/* uart1_rx_m1 */
+				<4 RK_PC6 2 &pcfg_pull_up>,
+				/* uart1_tx_m1 */
+				<4 RK_PC5 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1_ctsn: uart1-ctsn {
+			rockchip,pins =
+				/* uart1_ctsn */
+				<4 RK_PA4 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart1_rtsn: uart1-rtsn {
+			rockchip,pins =
+				/* uart1_rtsn */
+				<4 RK_PA5 2 &pcfg_pull_none>;
+		};
+	};
+
+	uart2 {
+		/omit-if-no-ref/
+		uart2m0_xfer: uart2m0-xfer {
+			rockchip,pins =
+				/* uart2_rx_m0 */
+				<3 RK_PA0 1 &pcfg_pull_up>,
+				/* uart2_tx_m0 */
+				<3 RK_PA1 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m0_ctsn: uart2m0-ctsn {
+			rockchip,pins =
+				/* uart2m0_ctsn */
+				<3 RK_PA3 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart2m0_rtsn: uart2m0-rtsn {
+			rockchip,pins =
+				/* uart2m0_rtsn */
+				<3 RK_PA2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart2m1_xfer: uart2m1-xfer {
+			rockchip,pins =
+				/* uart2_rx_m1 */
+				<1 RK_PB0 1 &pcfg_pull_up>,
+				/* uart2_tx_m1 */
+				<1 RK_PB1 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m1_ctsn: uart2m1-ctsn {
+			rockchip,pins =
+				/* uart2m1_ctsn */
+				<1 RK_PB3 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart2m1_rtsn: uart2m1-rtsn {
+			rockchip,pins =
+				/* uart2m1_rtsn */
+				<1 RK_PB2 1 &pcfg_pull_none>;
+		};
+	};
+
+	uart3 {
+		/omit-if-no-ref/
+		uart3m0_xfer: uart3m0-xfer {
+			rockchip,pins =
+				/* uart3_rx_m0 */
+				<4 RK_PB0 2 &pcfg_pull_up>,
+				/* uart3_tx_m0 */
+				<4 RK_PB1 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m1_xfer: uart3m1-xfer {
+			rockchip,pins =
+				/* uart3_rx_m1 */
+				<4 RK_PB7 3 &pcfg_pull_up>,
+				/* uart3_tx_m1 */
+				<4 RK_PC0 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3_ctsn: uart3-ctsn {
+			rockchip,pins =
+				/* uart3_ctsn */
+				<4 RK_PA3 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart3_rtsn: uart3-rtsn {
+			rockchip,pins =
+				/* uart3_rtsn */
+				<4 RK_PA2 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart4 {
+		/omit-if-no-ref/
+		uart4_xfer: uart4-xfer {
+			rockchip,pins =
+				/* uart4_rx */
+				<2 RK_PA2 3 &pcfg_pull_up>,
+				/* uart4_tx */
+				<2 RK_PA3 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4_ctsn: uart4-ctsn {
+			rockchip,pins =
+				/* uart4_ctsn */
+				<2 RK_PA1 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart4_rtsn: uart4-rtsn {
+			rockchip,pins =
+				/* uart4_rtsn */
+				<2 RK_PA0 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart5 {
+		/omit-if-no-ref/
+		uart5m0_xfer: uart5m0-xfer {
+			rockchip,pins =
+				/* uart5_rx_m0 */
+				<1 RK_PA2 2 &pcfg_pull_up>,
+				/* uart5_tx_m0 */
+				<1 RK_PA3 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_ctsn: uart5m0-ctsn {
+			rockchip,pins =
+				/* uart5m0_ctsn */
+				<1 RK_PA6 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart5m0_rtsn: uart5m0-rtsn {
+			rockchip,pins =
+				/* uart5m0_rtsn */
+				<1 RK_PA5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_xfer: uart5m1-xfer {
+			rockchip,pins =
+				/* uart5_rx_m1 */
+				<1 RK_PD4 2 &pcfg_pull_up>,
+				/* uart5_tx_m1 */
+				<1 RK_PD7 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_ctsn: uart5m1-ctsn {
+			rockchip,pins =
+				/* uart5m1_ctsn */
+				<1 RK_PD3 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart5m1_rtsn: uart5m1-rtsn {
+			rockchip,pins =
+				/* uart5m1_rtsn */
+				<1 RK_PD2 2 &pcfg_pull_none>;
+		};
+	};
+
+	uart6 {
+		/omit-if-no-ref/
+		uart6m0_xfer: uart6m0-xfer {
+			rockchip,pins =
+				/* uart6_rx_m0 */
+				<3 RK_PA7 4 &pcfg_pull_up>,
+				/* uart6_tx_m0 */
+				<3 RK_PA6 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_xfer: uart6m1-xfer {
+			rockchip,pins =
+				/* uart6_rx_m1 */
+				<3 RK_PC3 4 &pcfg_pull_up>,
+				/* uart6_tx_m1 */
+				<3 RK_PC1 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6_ctsn: uart6-ctsn {
+			rockchip,pins =
+				/* uart6_ctsn */
+				<3 RK_PA4 4 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart6_rtsn: uart6-rtsn {
+			rockchip,pins =
+				/* uart6_rtsn */
+				<3 RK_PA5 4 &pcfg_pull_none>;
+		};
+	};
+
+	uart7 {
+		/omit-if-no-ref/
+		uart7m0_xfer: uart7m0-xfer {
+			rockchip,pins =
+				/* uart7_rx_m0 */
+				<3 RK_PB3 4 &pcfg_pull_up>,
+				/* uart7_tx_m0 */
+				<3 RK_PB2 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_ctsn: uart7m0-ctsn {
+			rockchip,pins =
+				/* uart7m0_ctsn */
+				<3 RK_PB0 4 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart7m0_rtsn: uart7m0-rtsn {
+			rockchip,pins =
+				/* uart7m0_rtsn */
+				<3 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m1_xfer: uart7m1-xfer {
+			rockchip,pins =
+				/* uart7_rx_m1 */
+				<1 RK_PB3 4 &pcfg_pull_up>,
+				/* uart7_tx_m1 */
+				<1 RK_PB2 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m1_ctsn: uart7m1-ctsn {
+			rockchip,pins =
+				/* uart7m1_ctsn */
+				<1 RK_PB0 4 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart7m1_rtsn: uart7m1-rtsn {
+			rockchip,pins =
+				/* uart7m1_rtsn */
+				<1 RK_PB1 4 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
index d2cdb63d4a9d..b32452756155 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
@@ -6,17 +6,317 @@
  */
 
 /dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "rk3528.dtsi"
 
 / {
 	model = "Radxa E20C";
 	compatible = "radxa,e20c", "rockchip,rk3528";
 
+	aliases {
+		ethernet0 = &gmac1;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial0 = &uart0;
+	};
+
 	chosen {
 		stdout-path = "serial0:1500000n8";
 	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "MASKROM";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_key>;
+
+		button-user {
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "USER";
+			linux,code = <BTN_1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan_led_g>, <&sys_led_g>, <&wan_led_g>;
+
+		led-lan {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_LAN;
+			gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+		};
+
+		led-sys {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-wan {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	vdd_0v9: regulator-0v9-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: regulator-1v1-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: regulator-1v8-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-3v3-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: regulator-5v0-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vccio_sd: regulator-vccio-sd {
+		compatible = "regulator-gpio";
+		gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>, <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_arm";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <746000>;
+		regulator-max-microvolt = <1201000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_logic";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <705000>;
+		regulator-max-microvolt = <1006000>;
+		regulator-settling-time-up-us = <250>;
+	};
+};
+
+&combphy {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m0_xfer>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v3>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rstn_l>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pciem1_pins>;
+	reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pinctrl {
+	ethernet {
+		gmac1_rstn_l: gmac1-rstn-l {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-keys {
+		user_key: user-key {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		lan_led_g: lan-led-g {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sys_led_g: sys-led-g {
+			rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_g: wan-led-g {
+			rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1m0_pins>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
 };
 
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0m0_xfer>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi b/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi
new file mode 100644
index 000000000000..aedc7ee9ee46
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+	aliases {
+		i2c1 = &i2c1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "MASKROM";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_led_b>;
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_0v9: regulator-0v9-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: regulator-1v1-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: regulator-1v8-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-3v3-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_wifi: regulator-3v3-vcc-wifi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_wifi_pwr>;
+		regulator-name = "vcc_wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_sys: regulator-5v0-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb20: regulator-5v0-vcc-usb20 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_en>;
+		regulator-name = "vcc5v0_usb20";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vccio_sd: regulator-vccio-sd {
+		compatible = "regulator-gpio";
+		gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>, <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_arm";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <746000>;
+		regulator-max-microvolt = <1201000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_logic";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <705000>;
+		regulator-max-microvolt = <1006000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		label = "rfkill-wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m0_xfer>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v3>;
+	};
+};
+
+&pinctrl {
+	bluetooth {
+		bt_wake_host_h: bt-wake-host-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt_h: host-wake-bt-h {
+			rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		state_led_b: state-led-b {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_en: usb-host-en {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		usb_wifi_pwr: usb-wifi-pwr {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_wake_host_h: wifi-wake-host-h {
+			rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1m0_pins>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <100000000>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts b/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts
new file mode 100644
index 000000000000..0b696d49b71f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3528-rock-2.dtsi"
+
+/ {
+	model = "Radxa ROCK 2A";
+	compatible = "radxa,rock-2a", "rockchip,rk3528";
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	vcc5v0_usb30_otg: regulator-5v0-vcc-usb30-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_en>;
+		regulator-name = "vcc5v0_usb30_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+	status = "okay";
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_led_b>, <&sys_led_g>;
+
+	led-1 {
+		color = <LED_COLOR_ID_GREEN>;
+		default-state = "on";
+		function = LED_FUNCTION_STATUS;
+		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rstn_l>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		gmac1_rstn_l: gmac1-rstn-l {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		sys_led_g: sys-led-g {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_otg_en: usb-otg-en {
+			rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts b/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts
new file mode 100644
index 000000000000..3e2b9b685cb2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3528-rock-2.dtsi"
+
+/ {
+	model = "Radxa ROCK 2F";
+	compatible = "radxa,rock-2f", "rockchip,rk3528";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
index e58faa985aa4..d402f2828814 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
@@ -4,8 +4,14 @@
  * Copyright (c) 2024 Yao Zi <ziyao@disroot.org>
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rockchip,rk3528-cru.h>
+#include <dt-bindings/power/rockchip,rk3528-power.h>
+#include <dt-bindings/reset/rockchip,rk3528-cru.h>
 
 / {
 	compatible = "rockchip,rk3528";
@@ -15,14 +21,11 @@
 	#size-cells = <2>;
 
 	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
 	};
 
 	cpus {
@@ -51,6 +54,8 @@
 			reg = <0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
+			clocks = <&scmi_clk SCMI_CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		cpu1: cpu@1 {
@@ -58,6 +63,8 @@
 			reg = <0x1>;
 			device_type = "cpu";
 			enable-method = "psci";
+			clocks = <&scmi_clk SCMI_CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		cpu2: cpu@2 {
@@ -65,6 +72,8 @@
 			reg = <0x2>;
 			device_type = "cpu";
 			enable-method = "psci";
+			clocks = <&scmi_clk SCMI_CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		cpu3: cpu@3 {
@@ -72,6 +81,160 @@
 			reg = <0x3>;
 			device_type = "cpu";
 			enable-method = "psci";
+			clocks = <&scmi_clk SCMI_CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x82000010>;
+			shmem = <&scmi_shmem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <875000 875000 1100000>;
+			clock-latency-ns = <40000>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <925000 925000 1100000>;
+			clock-latency-ns = <40000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <975000 975000 1100000>;
+			clock-latency-ns = <40000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1037500 1037500 1100000>;
+			clock-latency-ns = <40000>;
+		};
+
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <1100000 1100000 1100000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <875000 875000 1000000>;
+			opp-suspend;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <875000 875000 1000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <875000 875000 1000000>;
+		};
+
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <900000 900000 1000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <950000 950000 1000000>;
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3528-pinctrl";
+		rockchip,grf = <&ioc_grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff610000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff610000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ffaf0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffaf0000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&power RK3528_PD_VPU>;
+		};
+
+		gpio2: gpio@ffb00000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffb00000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&power RK3528_PD_VO>;
+		};
+
+		gpio3: gpio@ffb10000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffb10000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&power RK3528_PD_VPU>;
+		};
+
+		gpio4: gpio@ffb20000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffb20000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&power RK3528_PD_RKVENC>;
 		};
 	};
 
@@ -80,6 +243,18 @@
 		method = "smc";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scmi_shmem: shmem@10f000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x0010f000 0x0 0x100>;
+			no-map;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -95,12 +270,72 @@
 		#clock-cells = <0>;
 	};
 
+	gmac0_clk: clock-gmac50m {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "gmac0";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
-		ranges = <0x0 0xfe000000 0x0 0xfe000000 0x0 0x2000000>;
+		ranges = <0x0 0xfc000000 0x0 0xfc000000 0x0 0x44000000>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 
+		pcie: pcie@fe000000 {
+			compatible = "rockchip,rk3528-pcie",
+				     "rockchip,rk3568-pcie";
+			reg = <0x0 0xfe000000 0x0 0x400000>,
+			      <0x0 0xfe4f0000 0x0 0x010000>,
+			      <0x0 0xfc000000 0x0 0x100000>;
+			reg-names = "dbi", "apb", "config";
+			bus-range = <0x0 0xff>;
+			clocks = <&cru ACLK_PCIE>, <&cru HCLK_PCIE_SLV>,
+				 <&cru HCLK_PCIE_DBI>, <&cru PCLK_PCIE>,
+				 <&cru CLK_PCIE_AUX>;
+			clock-names = "aclk_mst", "aclk_slv",
+				      "aclk_dbi", "pclk",
+				      "aux";
+			device_type = "pci";
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "sys", "pmc", "msg", "legacy", "err",
+					  "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			linux,pci-domain = <0>;
+			max-link-speed = <2>;
+			num-lanes = <1>;
+			phys = <&combphy PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&power RK3528_PD_VPU>;
+			ranges = <0x01000000 0x0 0xfc100000 0x0 0xfc100000 0x0 0x00100000>,
+				 <0x02000000 0x0 0xfc200000 0x0 0xfc200000 0x0 0x01e00000>,
+				 <0x03000000 0x1 0x00000000 0x1 0x00000000 0x0 0x40000000>;
+			resets = <&cru SRST_PCIE_POWER_UP>, <&cru SRST_P_PCIE>;
+			reset-names = "pwr", "pipe";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		gic: interrupt-controller@fed01000 {
 			compatible = "arm,gic-400";
 			reg = <0x0 0xfed01000 0 0x1000>,
@@ -114,11 +349,355 @@
 			#interrupt-cells = <3>;
 		};
 
+		qos_crypto_a: qos@ff200000 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff200000 0x0 0x20>;
+		};
+
+		qos_crypto_p: qos@ff200080 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff200080 0x0 0x20>;
+		};
+
+		qos_dcf: qos@ff200100 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff200100 0x0 0x20>;
+		};
+
+		qos_dft2apb: qos@ff200200 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff200200 0x0 0x20>;
+		};
+
+		qos_dma2ddr: qos@ff200280 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff200280 0x0 0x20>;
+		};
+
+		qos_dmac: qos@ff200300 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff200300 0x0 0x20>;
+		};
+
+		qos_keyreader: qos@ff200380 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff200380 0x0 0x20>;
+		};
+
+		qos_cpu: qos@ff210000 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff210000 0x0 0x20>;
+		};
+
+		qos_debug: qos@ff210080 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff210080 0x0 0x20>;
+		};
+
+		qos_gpu_m0: qos@ff220000 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff220000 0x0 0x20>;
+		};
+
+		qos_gpu_m1: qos@ff220080 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff220080 0x0 0x20>;
+		};
+
+		qos_pmu_mcu: qos@ff240000 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff240000 0x0 0x20>;
+		};
+
+		qos_rkvdec: qos@ff250000 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff250000 0x0 0x20>;
+		};
+
+		qos_rkvenc: qos@ff260000 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff260000 0x0 0x20>;
+		};
+
+		qos_gmac0: qos@ff270000 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff270000 0x0 0x20>;
+		};
+
+		qos_hdcp: qos@ff270080 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff270080 0x0 0x20>;
+		};
+
+		qos_jpegdec: qos@ff270100 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff270100 0x0 0x20>;
+		};
+
+		qos_rga2_m0ro: qos@ff270200 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff270200 0x0 0x20>;
+		};
+
+		qos_rga2_m0wo: qos@ff270280 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff270280 0x0 0x20>;
+		};
+
+		qos_sdmmc0: qos@ff270300 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff270300 0x0 0x20>;
+		};
+
+		qos_usb2host: qos@ff270380 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff270380 0x0 0x20>;
+		};
+
+		qos_vdpp: qos@ff270480 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff270480 0x0 0x20>;
+		};
+
+		qos_vop: qos@ff270500 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff270500 0x0 0x20>;
+		};
+
+		qos_emmc: qos@ff280000 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff280000 0x0 0x20>;
+		};
+
+		qos_fspi: qos@ff280080 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff280080 0x0 0x20>;
+		};
+
+		qos_gmac1: qos@ff280100 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff280100 0x0 0x20>;
+		};
+
+		qos_pcie: qos@ff280180 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff280180 0x0 0x20>;
+		};
+
+		qos_sdio0: qos@ff280200 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff280200 0x0 0x20>;
+		};
+
+		qos_sdio1: qos@ff280280 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff280280 0x0 0x20>;
+		};
+
+		qos_tsp: qos@ff280300 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff280300 0x0 0x20>;
+		};
+
+		qos_usb3otg: qos@ff280380 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff280380 0x0 0x20>;
+		};
+
+		qos_vpu: qos@ff280400 {
+			compatible = "rockchip,rk3528-qos", "syscon";
+			reg = <0x0 0xff280400 0x0 0x20>;
+		};
+
+		vpu_grf: syscon@ff340000 {
+			compatible = "rockchip,rk3528-vpu-grf", "syscon";
+			reg = <0x0 0xff340000 0x0 0x8000>;
+		};
+
+		pipe_phy_grf: syscon@ff348000 {
+			compatible = "rockchip,rk3528-pipe-phy-grf", "syscon";
+			reg = <0x0 0xff348000 0x0 0x8000>;
+		};
+
+		vo_grf: syscon@ff360000 {
+			compatible = "rockchip,rk3528-vo-grf", "syscon";
+			reg = <0x0 0xff360000 0x0 0x10000>;
+		};
+
+		cru: clock-controller@ff4a0000 {
+			compatible = "rockchip,rk3528-cru";
+			reg = <0x0 0xff4a0000 0x0 0x30000>;
+			assigned-clocks =
+				<&cru XIN_OSC0_DIV>, <&cru PLL_GPLL>,
+				<&cru PLL_PPLL>, <&cru PLL_CPLL>,
+				<&cru ARMCLK>, <&cru CLK_MATRIX_250M_SRC>,
+				<&cru CLK_MATRIX_500M_SRC>,
+				<&cru CLK_MATRIX_50M_SRC>,
+				<&cru CLK_MATRIX_100M_SRC>,
+				<&cru CLK_MATRIX_150M_SRC>,
+				<&cru CLK_MATRIX_200M_SRC>,
+				<&cru CLK_MATRIX_300M_SRC>,
+				<&cru CLK_MATRIX_339M_SRC>,
+				<&cru CLK_MATRIX_400M_SRC>,
+				<&cru CLK_MATRIX_600M_SRC>,
+				<&cru CLK_PPLL_50M_MATRIX>,
+				<&cru CLK_PPLL_100M_MATRIX>,
+				<&cru CLK_PPLL_125M_MATRIX>,
+				<&cru ACLK_BUS_VOPGL_ROOT>;
+			assigned-clock-rates =
+				<32768>, <1188000000>,
+				<1000000000>, <996000000>,
+				<408000000>, <250000000>,
+				<500000000>,
+				<50000000>,
+				<100000000>,
+				<150000000>,
+				<200000000>,
+				<300000000>,
+				<340000000>,
+				<400000000>,
+				<600000000>,
+				<50000000>,
+				<100000000>,
+				<125000000>,
+				<500000000>;
+			clocks = <&xin24m>, <&gmac0_clk>;
+			clock-names = "xin24m", "gmac0";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ioc_grf: syscon@ff540000 {
+			compatible = "rockchip,rk3528-ioc-grf", "syscon";
+			reg = <0x0 0xff540000 0x0 0x40000>;
+		};
+
+		pmu: power-management@ff600000 {
+			compatible = "rockchip,rk3528-pmu", "syscon", "simple-mfd";
+			reg = <0x0 0xff600000 0x0 0x2000>;
+
+			power: power-controller {
+				compatible = "rockchip,rk3528-power-controller";
+				#power-domain-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* These power domains are grouped by VD_GPU */
+				power-domain@RK3528_PD_GPU {
+					reg = <RK3528_PD_GPU>;
+					clocks = <&cru ACLK_GPU_MALI>,
+						 <&cru PCLK_GPU_ROOT>;
+					pm_qos = <&qos_gpu_m0>,
+						 <&qos_gpu_m1>;
+					#power-domain-cells = <0>;
+				};
+
+				/* These power domains are grouped by VD_LOGIC */
+				power-domain@RK3528_PD_RKVDEC {
+					reg = <RK3528_PD_RKVDEC>;
+					pm_qos = <&qos_rkvdec>;
+					#power-domain-cells = <0>;
+					status = "disabled";
+				};
+				power-domain@RK3528_PD_RKVENC {
+					reg = <RK3528_PD_RKVENC>;
+					pm_qos = <&qos_rkvenc>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3528_PD_VO {
+					reg = <RK3528_PD_VO>;
+					pm_qos = <&qos_gmac0>,
+						 <&qos_hdcp>,
+						 <&qos_jpegdec>,
+						 <&qos_rga2_m0ro>,
+						 <&qos_rga2_m0wo>,
+						 <&qos_sdmmc0>,
+						 <&qos_usb2host>,
+						 <&qos_vdpp>,
+						 <&qos_vop>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3528_PD_VPU {
+					reg = <RK3528_PD_VPU>;
+					pm_qos = <&qos_emmc>,
+						 <&qos_fspi>,
+						 <&qos_gmac1>,
+						 <&qos_pcie>,
+						 <&qos_sdio0>,
+						 <&qos_sdio1>,
+						 <&qos_tsp>,
+						 <&qos_usb3otg>,
+						 <&qos_vpu>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+
+		gpu: gpu@ff700000 {
+			compatible = "rockchip,rk3528-mali", "arm,mali-450";
+			reg = <0x0 0xff700000 0x0 0x40000>;
+			assigned-clocks = <&cru ACLK_GPU_MALI>,
+					  <&scmi_clk SCMI_CLK_GPU>;
+			assigned-clock-rates = <297000000>, <300000000>;
+			clocks = <&cru ACLK_GPU_MALI>, <&scmi_clk SCMI_CLK_GPU>;
+			clock-names = "bus", "core";
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&power RK3528_PD_GPU>;
+			resets = <&cru SRST_A_GPU>;
+			status = "disabled";
+		};
+
+		spi0: spi@ff9c0000 {
+			compatible = "rockchip,rk3528-spi",
+				     "rockchip,rk3066-spi";
+			reg = <0x0 0xff9c0000 0x0 0x1000>;
+			clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
+			clock-names = "spiclk", "apb_pclk";
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 25>, <&dmac 24>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3528_PD_RKVENC>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@ff9d0000 {
+			compatible = "rockchip,rk3528-spi",
+				     "rockchip,rk3066-spi";
+			reg = <0x0 0xff9d0000 0x0 0x1000>;
+			clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+			clock-names = "spiclk", "apb_pclk";
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 31>, <&dmac 30>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3528_PD_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		uart0: serial@ff9f0000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xff9f0000 0x0 0x100>;
-			clock-frequency = <24000000>;
+			clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 9>, <&dmac 8>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -127,7 +706,11 @@
 		uart1: serial@ff9f8000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xff9f8000 0x0 0x100>;
+			clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 11>, <&dmac 10>;
+			power-domains = <&power RK3528_PD_RKVENC>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -136,7 +719,11 @@
 		uart2: serial@ffa00000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa00000 0x0 0x100>;
+			clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 13>, <&dmac 12>;
+			power-domains = <&power RK3528_PD_VPU>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -145,6 +732,11 @@
 		uart3: serial@ffa08000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa08000 0x0 0x100>;
+			clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+			clock-names = "baudclk", "apb_pclk";
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 15>, <&dmac 14>;
+			power-domains = <&power RK3528_PD_RKVENC>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -153,7 +745,11 @@
 		uart4: serial@ffa10000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa10000 0x0 0x100>;
+			clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 17>, <&dmac 16>;
+			power-domains = <&power RK3528_PD_VO>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -162,7 +758,11 @@
 		uart5: serial@ffa18000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa18000 0x0 0x100>;
+			clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 19>, <&dmac 18>;
+			power-domains = <&power RK3528_PD_VPU>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -171,7 +771,11 @@
 		uart6: serial@ffa20000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa20000 0x0 0x100>;
+			clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 21>, <&dmac 20>;
+			power-domains = <&power RK3528_PD_VPU>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -180,10 +784,449 @@
 		uart7: serial@ffa28000 {
 			compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
 			reg = <0x0 0xffa28000 0x0 0x100>;
+			clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac 23>, <&dmac 22>;
+			power-domains = <&power RK3528_PD_VPU>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
 		};
+
+		i2c0: i2c@ffa50000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa50000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_RKVENC>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffa58000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa58000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_RKVENC>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffa60000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa60000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2m1_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffa68000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa68000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffa70000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa70000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_xfer>;
+			power-domains = <&power RK3528_PD_VO>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@ffa78000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa78000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@ffa80000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa80000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@ffa88000 {
+			compatible = "rockchip,rk3528-i2c",
+				     "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa88000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C7>, <&cru PCLK_I2C7>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_xfer>;
+			power-domains = <&power RK3528_PD_VO>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@ffa90000 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa90000 0x0 0x10>;
+			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@ffa90010 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa90010 0x0 0x10>;
+			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@ffa90020 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa90020 0x0 0x10>;
+			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@ffa90030 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa90030 0x0 0x10>;
+			clocks = <&cru CLK_PWM0>, <&cru PCLK_PWM0>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@ffa98000 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa98000 0x0 0x10>;
+			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@ffa98010 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa98010 0x0 0x10>;
+			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@ffa98020 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa98020 0x0 0x10>;
+			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@ffa98030 {
+			compatible = "rockchip,rk3528-pwm",
+				     "rockchip,rk3328-pwm";
+			reg = <0x0 0xffa98030 0x0 0x10>;
+			clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+			clock-names = "pwm", "pclk";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		saradc: adc@ffae0000 {
+			compatible = "rockchip,rk3528-saradc";
+			reg = <0x0 0xffae0000 0x0 0x10000>;
+			clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+			clock-names = "saradc", "apb_pclk";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_VPU>;
+			resets = <&cru SRST_P_SARADC>;
+			reset-names = "saradc-apb";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		gmac0: ethernet@ffbd0000 {
+			compatible = "rockchip,rk3528-gmac", "snps,dwmac-4.20a";
+			reg = <0x0 0xffbd0000 0x0 0x10000>;
+			clocks = <&cru CLK_GMAC0_SRC>, <&cru CLK_GMAC0_RMII_50M>,
+				 <&cru CLK_GMAC0_RX>, <&cru CLK_GMAC0_TX>,
+				 <&cru PCLK_MAC_VO>, <&cru ACLK_MAC_VO>;
+			clock-names = "stmmaceth", "clk_mac_ref",
+				      "mac_clk_rx", "mac_clk_tx",
+				      "pclk_mac", "aclk_mac";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			phy-handle = <&rmii0_phy>;
+			phy-mode = "rmii";
+			power-domains = <&power RK3528_PD_VO>;
+			resets = <&cru SRST_A_MAC_VO>;
+			reset-names = "stmmaceth";
+			rockchip,grf = <&vo_grf>;
+			snps,axi-config = <&gmac0_stmmac_axi_setup>;
+			snps,mixed-burst;
+			snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+			snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+			snps,tso;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+
+				rmii0_phy: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x2>;
+					clocks = <&cru CLK_MACPHY>;
+					phy-is-integrated;
+					pinctrl-names = "default";
+					pinctrl-0 = <&fephym0_led_link>,
+						    <&fephym0_led_spd>;
+					resets = <&cru SRST_MACPHY>;
+				};
+			};
+
+			gmac0_stmmac_axi_setup: stmmac-axi-config {
+				snps,blen = <0 0 0 0 16 8 4>;
+				snps,rd_osr_lmt = <8>;
+				snps,wr_osr_lmt = <4>;
+			};
+
+			gmac0_mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <1>;
+				queue0 {};
+			};
+
+			gmac0_mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <1>;
+				queue0 {};
+			};
+		};
+
+		gmac1: ethernet@ffbe0000 {
+			compatible = "rockchip,rk3528-gmac", "snps,dwmac-4.20a";
+			reg = <0x0 0xffbe0000 0x0 0x10000>;
+			clocks = <&cru CLK_GMAC1_SRC_VPU>,
+				 <&cru CLK_GMAC1_RMII_VPU>,
+				 <&cru PCLK_MAC_VPU>,
+				 <&cru ACLK_MAC_VPU>;
+			clock-names = "stmmaceth",
+				      "clk_mac_ref",
+				      "pclk_mac",
+				      "aclk_mac";
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			power-domains = <&power RK3528_PD_VPU>;
+			resets = <&cru SRST_A_MAC>;
+			reset-names = "stmmaceth";
+			rockchip,grf = <&vpu_grf>;
+			snps,axi-config = <&gmac1_stmmac_axi_setup>;
+			snps,mixed-burst;
+			snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+			snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+			snps,tso;
+			status = "disabled";
+
+			mdio1: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+			};
+
+			gmac1_stmmac_axi_setup: stmmac-axi-config {
+				snps,blen = <0 0 0 0 16 8 4>;
+				snps,rd_osr_lmt = <8>;
+				snps,wr_osr_lmt = <4>;
+			};
+
+			gmac1_mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <1>;
+				queue0 {};
+			};
+
+			gmac1_mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <1>;
+				queue0 {};
+			};
+		};
+
+		sdhci: mmc@ffbf0000 {
+			compatible = "rockchip,rk3528-dwcmshc",
+				     "rockchip,rk3588-dwcmshc";
+			reg = <0x0 0xffbf0000 0x0 0x10000>;
+			assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>,
+					  <&cru CCLK_SRC_EMMC>;
+			assigned-clock-rates = <200000000>, <24000000>,
+					       <200000000>;
+			clocks = <&cru CCLK_SRC_EMMC>, <&cru HCLK_EMMC>,
+				 <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+				 <&cru TCLK_EMMC>;
+			clock-names = "core", "bus", "axi", "block", "timer";
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <200000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
+				    <&emmc_strb>;
+			power-domains = <&power RK3528_PD_VPU>;
+			resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
+				 <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
+				 <&cru SRST_T_EMMC>;
+			reset-names = "core", "bus", "axi", "block", "timer";
+			status = "disabled";
+		};
+
+		sdio0: mmc@ffc10000 {
+			compatible = "rockchip,rk3528-dw-mshc",
+				     "rockchip,rk3288-dw-mshc";
+			reg = <0x0 0xffc10000 0x0 0x4000>;
+			clocks = <&cru HCLK_SDIO0>,
+				 <&cru CCLK_SRC_SDIO0>,
+				 <&cru SCLK_SDIO0_DRV>,
+				 <&cru SCLK_SDIO0_SAMPLE>;
+			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+			fifo-depth = <0x100>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <200000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdio0_bus4>, <&sdio0_clk>, <&sdio0_cmd>;
+			power-domains = <&power RK3528_PD_VPU>;
+			resets = <&cru SRST_H_SDIO0>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		sdio1: mmc@ffc20000 {
+			compatible = "rockchip,rk3528-dw-mshc",
+				     "rockchip,rk3288-dw-mshc";
+			reg = <0x0 0xffc20000 0x0 0x4000>;
+			clocks = <&cru HCLK_SDIO1>,
+				 <&cru CCLK_SRC_SDIO1>,
+				 <&cru SCLK_SDIO1_DRV>,
+				 <&cru SCLK_SDIO1_SAMPLE>;
+			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+			fifo-depth = <0x100>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <200000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdio1_bus4>, <&sdio1_clk>, <&sdio1_cmd>;
+			power-domains = <&power RK3528_PD_VPU>;
+			resets = <&cru SRST_H_SDIO1>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		sdmmc: mmc@ffc30000 {
+			compatible = "rockchip,rk3528-dw-mshc",
+				     "rockchip,rk3288-dw-mshc";
+			reg = <0x0 0xffc30000 0x0 0x4000>;
+			clocks = <&cru HCLK_SDMMC0>,
+				 <&cru CCLK_SRC_SDMMC0>,
+				 <&cru SCLK_SDMMC_DRV>,
+				 <&cru SCLK_SDMMC_SAMPLE>;
+			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+			fifo-depth = <0x100>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdmmc_bus4>, <&sdmmc_clk>, <&sdmmc_cmd>,
+				    <&sdmmc_det>;
+			power-domains = <&power RK3528_PD_VO>;
+			resets = <&cru SRST_H_SDMMC0>;
+			reset-names = "reset";
+			rockchip,default-sample-phase = <90>;
+			status = "disabled";
+		};
+
+		dmac: dma-controller@ffd60000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xffd60000 0x0 0x4000>;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-periph-burst;
+		};
+
+		combphy: phy@ffdc0000 {
+			compatible = "rockchip,rk3528-naneng-combphy";
+			reg = <0x0 0xffdc0000 0x0 0x10000>;
+			assigned-clocks = <&cru CLK_REF_PCIE_INNER_PHY>;
+			assigned-clock-rates = <100000000>;
+			clocks = <&cru CLK_REF_PCIE_INNER_PHY>,
+				 <&cru PCLK_PCIE_PHY>,
+				 <&cru PCLK_PIPE_GRF>;
+			clock-names = "ref", "apb", "pipe";
+			power-domains = <&power RK3528_PD_VPU>;
+			resets = <&cru SRST_PCIE_PIPE_PHY>,
+				 <&cru SRST_P_PCIE_PHY>;
+			reset-names = "phy", "apb";
+			#phy-cells = <1>;
+			rockchip,pipe-grf = <&vpu_grf>;
+			rockchip,pipe-phy-grf = <&pipe_phy_grf>;
+			status = "disabled";
+		};
 	};
 };
+
+#include "rk3528-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/rk3562-evb2-v10.dts b/arch/arm64/boot/dts/rockchip/rk3562-evb2-v10.dts
new file mode 100644
index 000000000000..6a84db154a7d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3562-evb2-v10.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024-2025 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3562.dtsi"
+
+/ {
+	model = "Rockchip RK3562 EVB V20 Board";
+	compatible = "rockchip,rk3562-evb2-v10", "rockchip,rk3562";
+
+	chosen: chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc_keys: adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc0 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-vol-up {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			press-threshold-microvolt = <17000>;
+		};
+
+		button-vol-down {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			press-threshold-microvolt = <414000>;
+		};
+
+		button-menu {
+			linux,code = <KEY_MENU>;
+			label = "menu";
+			press-threshold-microvolt = <800000>;
+		};
+
+		button-back {
+			linux,code = <KEY_BACK>;
+			label = "back";
+			press-threshold-microvolt = <1200000>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		work_led: led-0 {
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie20";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb_host: regulator-vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc5v0_usb>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+	};
+
+	vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc5v0_usb>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren>;
+	};
+
+	vcc3v3_clk: regulator-vcc3v3-clk {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_clk";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&combphy {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default", "pmic-sleep",
+			"pmic-power-off", "pmic-reset";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_cpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG1 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+				regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+				regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&pcie2x1 {
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie20>;
+	status = "okay";
+};
+
+&pinctrl {
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc0 {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&sdmmc0 {
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	no-sd;
+	no-mmc;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3562-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3562-pinctrl.dtsi
new file mode 100644
index 000000000000..b311448d77a3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3562-pinctrl.dtsi
@@ -0,0 +1,2352 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	cam {
+		/omit-if-no-ref/
+		camm0_clk0_out: camm0-clk0-out {
+			rockchip,pins =
+				/* camm0_clk0_out */
+				<3 RK_PB2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		camm0_clk1_out: camm0-clk1-out {
+			rockchip,pins =
+				/* camm0_clk1_out */
+				<3 RK_PB3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		camm1_clk0_out: camm1-clk0-out {
+			rockchip,pins =
+				/* camm1_clk0_out */
+				<4 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		camm1_clk1_out: camm1-clk1-out {
+			rockchip,pins =
+				/* camm1_clk1_out */
+				<4 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cam_clk2_out: cam-clk2-out {
+			rockchip,pins =
+				/* cam_clk2_out */
+				<3 RK_PB4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cam_clk3_out: cam-clk3-out {
+			rockchip,pins =
+				/* cam_clk3_out */
+				<3 RK_PB5 2 &pcfg_pull_none>;
+		};
+	};
+
+	can0 {
+		/omit-if-no-ref/
+		can0m0_pins: can0m0-pins {
+			rockchip,pins =
+				/* can0_rx_m0 */
+				<3 RK_PA1 4 &pcfg_pull_none>,
+				/* can0_tx_m0 */
+				<3 RK_PA0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can0m1_pins: can0m1-pins {
+			rockchip,pins =
+				/* can0_rx_m1 */
+				<3 RK_PB7 6 &pcfg_pull_none>,
+				/* can0_tx_m1 */
+				<3 RK_PB6 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can0m2_pins: can0m2-pins {
+			rockchip,pins =
+				/* can0_rx_m2 */
+				<0 RK_PC7 2 &pcfg_pull_none>,
+				/* can0_tx_m2 */
+				<0 RK_PC6 2 &pcfg_pull_none>;
+		};
+	};
+
+	can1 {
+		/omit-if-no-ref/
+		can1m0_pins: can1m0-pins {
+			rockchip,pins =
+				/* can1_rx_m0 */
+				<1 RK_PB7 4 &pcfg_pull_none>,
+				/* can1_tx_m0 */
+				<1 RK_PC0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can1m1_pins: can1m1-pins {
+			rockchip,pins =
+				/* can1_rx_m1 */
+				<0 RK_PC1 4 &pcfg_pull_none>,
+				/* can1_tx_m1 */
+				<0 RK_PC0 4 &pcfg_pull_none>;
+		};
+	};
+
+	clk {
+		/omit-if-no-ref/
+		clk_32k_in: clk-32k-in {
+			rockchip,pins =
+				/* clk_32k_in */
+				<0 RK_PB0 1 &pcfg_pull_none>;
+		};
+	};
+
+	clk0 {
+		/omit-if-no-ref/
+		clk0_32k_out: clk0-32k-out {
+			rockchip,pins =
+				/* clk0_32k_out */
+				<0 RK_PB0 2 &pcfg_pull_none>;
+		};
+	};
+
+	clk1 {
+		/omit-if-no-ref/
+		clk1_32k_out: clk1-32k-out {
+			rockchip,pins =
+				/* clk1_32k_out */
+				<2 RK_PA1 3 &pcfg_pull_none>;
+		};
+	};
+
+	cpu {
+		/omit-if-no-ref/
+		cpu_pins: cpu-pins {
+			rockchip,pins =
+				/* cpu_avs */
+				<0 RK_PB7 3 &pcfg_pull_none>;
+		};
+	};
+
+	dsm {
+		/omit-if-no-ref/
+		dsm_pins: dsm-pins {
+			rockchip,pins =
+				/* dsm_aud_ln */
+				<1 RK_PB4 5 &pcfg_pull_none>,
+				/* dsm_aud_lp */
+				<1 RK_PB3 5 &pcfg_pull_none>,
+				/* dsm_aud_rn */
+				<1 RK_PB6 6 &pcfg_pull_none>,
+				/* dsm_aud_rp */
+				<1 RK_PB5 6 &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		/omit-if-no-ref/
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins =
+				/* emmc_d0 */
+				<1 RK_PA0 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d1 */
+				<1 RK_PA1 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d2 */
+				<1 RK_PA2 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d3 */
+				<1 RK_PA3 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d4 */
+				<1 RK_PA4 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d5 */
+				<1 RK_PA5 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d6 */
+				<1 RK_PA6 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d7 */
+				<1 RK_PA7 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_clk: emmc-clk {
+			rockchip,pins =
+				/* emmc_clk */
+				<1 RK_PB1 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_cmd: emmc-cmd {
+			rockchip,pins =
+				/* emmc_cmd */
+				<1 RK_PB0 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_strb: emmc-strb {
+			rockchip,pins =
+				/* emmc_strb */
+				<1 RK_PB2 1 &pcfg_pull_none>;
+		};
+	};
+
+	eth {
+		/omit-if-no-ref/
+		ethm0_pins: ethm0-pins {
+			rockchip,pins =
+				/* eth_clk_25m_out_m0 */
+				<4 RK_PB1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		ethm1_pins: ethm1-pins {
+			rockchip,pins =
+				/* eth_clk_25m_out_m1 */
+				<2 RK_PA1 2 &pcfg_pull_none>;
+		};
+	};
+
+	fspi {
+		/omit-if-no-ref/
+		fspi_pins: fspi-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PB1 2 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PA0 2 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PA1 2 &pcfg_pull_none>,
+				/* fspi_d2 */
+				<1 RK_PA2 2 &pcfg_pull_none>,
+				/* fspi_d3 */
+				<1 RK_PA3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		fspi_csn0: fspi-csn0 {
+			rockchip,pins =
+				/* fspi_csn0 */
+				<1 RK_PB0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		fspi_csn1: fspi-csn1 {
+			rockchip,pins =
+				/* fspi_csn1 */
+				<1 RK_PB2 2 &pcfg_pull_none>;
+		};
+	};
+
+	gpu {
+		/omit-if-no-ref/
+		gpu_pins: gpu-pins {
+			rockchip,pins =
+				/* gpu_avs */
+				<0 RK_PC0 3 &pcfg_pull_none>;
+		};
+	};
+
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0_xfer: i2c0-xfer {
+			rockchip,pins =
+				/* i2c0_scl */
+				<0 RK_PB1 1 &pcfg_pull_none_smt>,
+				/* i2c0_sda */
+				<0 RK_PB2 1 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c1 {
+		/omit-if-no-ref/
+		i2c1m0_xfer: i2c1m0-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m0 */
+				<0 RK_PB3 1 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m0 */
+				<0 RK_PB4 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m1_xfer: i2c1m1-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m1 */
+				<4 RK_PB4 5 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m1 */
+				<4 RK_PB5 5 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2m0_xfer: i2c2m0-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m0 */
+				<0 RK_PB5 1 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m0 */
+				<0 RK_PB6 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m1_xfer: i2c2m1-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m1 */
+				<3 RK_PD2 5 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m1 */
+				<3 RK_PD3 5 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c3 {
+		/omit-if-no-ref/
+		i2c3m0_xfer: i2c3m0-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m0 */
+				<3 RK_PA0 1 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m0 */
+				<3 RK_PA1 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m1_xfer: i2c3m1-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m1 */
+				<4 RK_PA5 5 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m1 */
+				<4 RK_PA6 5 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c4 {
+		/omit-if-no-ref/
+		i2c4m0_xfer: i2c4m0-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m0 */
+				<3 RK_PB6 5 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m0 */
+				<3 RK_PB7 5 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c4m1_xfer: i2c4m1-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m1 */
+				<0 RK_PA5 2 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m1 */
+				<0 RK_PA4 2 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c5 {
+		/omit-if-no-ref/
+		i2c5m0_xfer: i2c5m0-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m0 */
+				<3 RK_PC2 1 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m0 */
+				<3 RK_PC3 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m1_xfer: i2c5m1-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m1 */
+				<1 RK_PC7 4 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m1 */
+				<1 RK_PD0 4 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2s0 {
+		/omit-if-no-ref/
+		i2s0m0_lrck: i2s0m0-lrck {
+			rockchip,pins =
+				/* i2s0_lrck_m0 */
+				<3 RK_PA4 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_mclk: i2s0m0-mclk {
+			rockchip,pins =
+				/* i2s0_mclk_m0 */
+				<3 RK_PA2 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sclk: i2s0m0-sclk {
+			rockchip,pins =
+				/* i2s0_sclk_m0 */
+				<3 RK_PA3 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdi0: i2s0m0-sdi0 {
+			rockchip,pins =
+				/* i2s0_sdi0_m0 */
+				<3 RK_PB1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdi1: i2s0m0-sdi1 {
+			rockchip,pins =
+				/* i2s0_sdi1_m0 */
+				<3 RK_PB0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdi2: i2s0m0-sdi2 {
+			rockchip,pins =
+				/* i2s0_sdi2_m0 */
+				<3 RK_PA7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdi3: i2s0m0-sdi3 {
+			rockchip,pins =
+				/* i2s0_sdi3_m0 */
+				<3 RK_PA6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdo0: i2s0m0-sdo0 {
+			rockchip,pins =
+				/* i2s0_sdo0_m0 */
+				<3 RK_PA5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdo1: i2s0m0-sdo1 {
+			rockchip,pins =
+				/* i2s0_sdo1_m0 */
+				<3 RK_PA6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdo2: i2s0m0-sdo2 {
+			rockchip,pins =
+				/* i2s0_sdo2_m0 */
+				<3 RK_PA7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m0_sdo3: i2s0m0-sdo3 {
+			rockchip,pins =
+				/* i2s0_sdo3_m0 */
+				<3 RK_PB0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_lrck: i2s0m1-lrck {
+			rockchip,pins =
+				/* i2s0_lrck_m1 */
+				<1 RK_PC4 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_mclk: i2s0m1-mclk {
+			rockchip,pins =
+				/* i2s0_mclk_m1 */
+				<1 RK_PC6 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sclk: i2s0m1-sclk {
+			rockchip,pins =
+				/* i2s0_sclk_m1 */
+				<1 RK_PC5 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdi0: i2s0m1-sdi0 {
+			rockchip,pins =
+				/* i2s0_sdi0_m1 */
+				<1 RK_PC1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdi1: i2s0m1-sdi1 {
+			rockchip,pins =
+				/* i2s0_sdi1_m1 */
+				<1 RK_PC2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdi2: i2s0m1-sdi2 {
+			rockchip,pins =
+				/* i2s0_sdi2_m1 */
+				<1 RK_PD3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdi3: i2s0m1-sdi3 {
+			rockchip,pins =
+				/* i2s0_sdi3_m1 */
+				<1 RK_PD4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdo0: i2s0m1-sdo0 {
+			rockchip,pins =
+				/* i2s0_sdo0_m1 */
+				<1 RK_PC3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdo1: i2s0m1-sdo1 {
+			rockchip,pins =
+				/* i2s0_sdo1_m1 */
+				<1 RK_PD1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdo2: i2s0m1-sdo2 {
+			rockchip,pins =
+				/* i2s0_sdo2_m1 */
+				<1 RK_PD2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0m1_sdo3: i2s0m1-sdo3 {
+			rockchip,pins =
+				/* i2s0_sdo3_m1 */
+				<2 RK_PA1 5 &pcfg_pull_none>;
+		};
+	};
+
+	i2s1 {
+		/omit-if-no-ref/
+		i2s1m0_lrck: i2s1m0-lrck {
+			rockchip,pins =
+				/* i2s1_lrck_m0 */
+				<3 RK_PC6 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_mclk: i2s1m0-mclk {
+			rockchip,pins =
+				/* i2s1_mclk_m0 */
+				<3 RK_PC4 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sclk: i2s1m0-sclk {
+			rockchip,pins =
+				/* i2s1_sclk_m0 */
+				<3 RK_PC5 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi0: i2s1m0-sdi0 {
+			rockchip,pins =
+				/* i2s1_sdi0_m0 */
+				<3 RK_PD0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi1: i2s1m0-sdi1 {
+			rockchip,pins =
+				/* i2s1_sdi1_m0 */
+				<3 RK_PD1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi2: i2s1m0-sdi2 {
+			rockchip,pins =
+				/* i2s1_sdi2_m0 */
+				<3 RK_PD2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi3: i2s1m0-sdi3 {
+			rockchip,pins =
+				/* i2s1_sdi3_m0 */
+				<3 RK_PD3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo0: i2s1m0-sdo0 {
+			rockchip,pins =
+				/* i2s1_sdo0_m0 */
+				<3 RK_PC7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo1: i2s1m0-sdo1 {
+			rockchip,pins =
+				/* i2s1_sdo1_m0 */
+				<4 RK_PB4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo2: i2s1m0-sdo2 {
+			rockchip,pins =
+				/* i2s1_sdo2_m0 */
+				<4 RK_PB5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo3: i2s1m0-sdo3 {
+			rockchip,pins =
+				/* i2s1_sdo3_m0 */
+				<4 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_lrck: i2s1m1-lrck {
+			rockchip,pins =
+				/* i2s1_lrck_m1 */
+				<3 RK_PB4 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_mclk: i2s1m1-mclk {
+			rockchip,pins =
+				/* i2s1_mclk_m1 */
+				<3 RK_PB2 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sclk: i2s1m1-sclk {
+			rockchip,pins =
+				/* i2s1_sclk_m1 */
+				<3 RK_PB3 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi0: i2s1m1-sdi0 {
+			rockchip,pins =
+				/* i2s1_sdi0_m1 */
+				<3 RK_PC1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi1: i2s1m1-sdi1 {
+			rockchip,pins =
+				/* i2s1_sdi1_m1 */
+				<3 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi2: i2s1m1-sdi2 {
+			rockchip,pins =
+				/* i2s1_sdi2_m1 */
+				<3 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi3: i2s1m1-sdi3 {
+			rockchip,pins =
+				/* i2s1_sdi3_m1 */
+				<3 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo0: i2s1m1-sdo0 {
+			rockchip,pins =
+				/* i2s1_sdo0_m1 */
+				<3 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo1: i2s1m1-sdo1 {
+			rockchip,pins =
+				/* i2s1_sdo1_m1 */
+				<3 RK_PB6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo2: i2s1m1-sdo2 {
+			rockchip,pins =
+				/* i2s1_sdo2_m1 */
+				<3 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo3: i2s1m1-sdo3 {
+			rockchip,pins =
+				/* i2s1_sdo3_m1 */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+	};
+
+	i2s2 {
+		/omit-if-no-ref/
+		i2s2m0_lrck: i2s2m0-lrck {
+			rockchip,pins =
+				/* i2s2_lrck_m0 */
+				<1 RK_PD6 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_mclk: i2s2m0-mclk {
+			rockchip,pins =
+				/* i2s2_mclk_m0 */
+				<2 RK_PA1 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sclk: i2s2m0-sclk {
+			rockchip,pins =
+				/* i2s2_sclk_m0 */
+				<1 RK_PD5 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdi: i2s2m0-sdi {
+			rockchip,pins =
+				/* i2s2_sdi_m0 */
+				<2 RK_PA0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdo: i2s2m0-sdo {
+			rockchip,pins =
+				/* i2s2_sdo_m0 */
+				<1 RK_PD7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_lrck: i2s2m1-lrck {
+			rockchip,pins =
+				/* i2s2_lrck_m1 */
+				<4 RK_PA1 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_mclk: i2s2m1-mclk {
+			rockchip,pins =
+				/* i2s2_mclk_m1 */
+				<3 RK_PD6 3 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sclk: i2s2m1-sclk {
+			rockchip,pins =
+				/* i2s2_sclk_m1 */
+				<4 RK_PB1 4 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdi: i2s2m1-sdi {
+			rockchip,pins =
+				/* i2s2_sdi_m1 */
+				<3 RK_PD4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdo: i2s2m1-sdo {
+			rockchip,pins =
+				/* i2s2_sdo_m1 */
+				<3 RK_PD5 4 &pcfg_pull_none>;
+		};
+	};
+
+	isp {
+		/omit-if-no-ref/
+		isp_pins: isp-pins {
+			rockchip,pins =
+				/* isp_flash_trigin */
+				<3 RK_PC1 2 &pcfg_pull_none>,
+				/* isp_flash_trigout */
+				<3 RK_PC3 2 &pcfg_pull_none>,
+				/* isp_prelight_trigout */
+				<3 RK_PC2 2 &pcfg_pull_none>;
+		};
+	};
+
+	jtag {
+		/omit-if-no-ref/
+		jtagm0_pins: jtagm0-pins {
+			rockchip,pins =
+				/* jtag_cpu_mcu_tck_m0 */
+				<0 RK_PD1 2 &pcfg_pull_none>,
+				/* jtag_cpu_mcu_tms_m0 */
+				<0 RK_PD0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		jtagm1_pins: jtagm1-pins {
+			rockchip,pins =
+				/* jtag_cpu_mcu_tck_m1 */
+				<1 RK_PB5 2 &pcfg_pull_none>,
+				/* jtag_cpu_mcu_tms_m1 */
+				<1 RK_PB6 2 &pcfg_pull_none>;
+		};
+	};
+
+	npu {
+		/omit-if-no-ref/
+		npu_pins: npu-pins {
+			rockchip,pins =
+				/* npu_avs */
+				<0 RK_PC1 3 &pcfg_pull_none>;
+		};
+	};
+
+	pcie20 {
+		/omit-if-no-ref/
+		pcie20m0_pins: pcie20m0-pins {
+			rockchip,pins =
+				/* pcie20_clkreqn_m0 */
+				<0 RK_PA6 1 &pcfg_pull_none>,
+				/* pcie20_perstn_m0 */
+				<0 RK_PB5 2 &pcfg_pull_none>,
+				/* pcie20_waken_m0 */
+				<0 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20m1_pins: pcie20m1-pins {
+			rockchip,pins =
+				/* pcie20_clkreqn_m1 */
+				<3 RK_PA6 4 &pcfg_pull_none>,
+				/* pcie20_perstn_m1 */
+				<3 RK_PB0 4 &pcfg_pull_none>,
+				/* pcie20_waken_m1 */
+				<3 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20_buttonrstn: pcie20-buttonrstn {
+			rockchip,pins =
+				/* pcie20_buttonrstn */
+				<0 RK_PB0 3 &pcfg_pull_none>;
+		};
+	};
+
+	pdm {
+		/omit-if-no-ref/
+		pdmm0_clk0: pdmm0-clk0 {
+			rockchip,pins =
+				/* pdm_clk0_m0 */
+				<3 RK_PA6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_clk1: pdmm0-clk1 {
+			rockchip,pins =
+				/* pdm_clk1_m0 */
+				<3 RK_PA2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi0: pdmm0-sdi0 {
+			rockchip,pins =
+				/* pdm_sdi0_m0 */
+				<3 RK_PB1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi1: pdmm0-sdi1 {
+			rockchip,pins =
+				/* pdm_sdi1_m0 */
+				<3 RK_PB0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi2: pdmm0-sdi2 {
+			rockchip,pins =
+				/* pdm_sdi2_m0 */
+				<3 RK_PA7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi3: pdmm0-sdi3 {
+			rockchip,pins =
+				/* pdm_sdi3_m0 */
+				<3 RK_PA0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_clk0: pdmm1-clk0 {
+			rockchip,pins =
+				/* pdm_clk0_m1 */
+				<4 RK_PB7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_clk1: pdmm1-clk1 {
+			rockchip,pins =
+				/* pdm_clk1_m1 */
+				<4 RK_PB1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi0: pdmm1-sdi0 {
+			rockchip,pins =
+				/* pdm_sdi0_m1 */
+				<4 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi1: pdmm1-sdi1 {
+			rockchip,pins =
+				/* pdm_sdi1_m1 */
+				<4 RK_PB0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi2: pdmm1-sdi2 {
+			rockchip,pins =
+				/* pdm_sdi2_m1 */
+				<4 RK_PA5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi3: pdmm1-sdi3 {
+			rockchip,pins =
+				/* pdm_sdi3_m1 */
+				<4 RK_PA6 4 &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		/omit-if-no-ref/
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA3 0 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		soc_slppin_gpio: soc-slppin-gpio {
+			rockchip,pins =
+				<0 RK_PA2 0 &pcfg_output_low>;
+		};
+
+		/omit-if-no-ref/
+		soc_slppin_slp: soc-slppin-slp {
+			rockchip,pins =
+				<0 RK_PA2 1 &pcfg_pull_none>;
+		};
+	};
+
+	pmu {
+		/omit-if-no-ref/
+		pmu_pins: pmu-pins {
+			rockchip,pins =
+				/* pmu_debug */
+				<0 RK_PA5 3 &pcfg_pull_none>;
+		};
+	};
+
+	pwm0 {
+		/omit-if-no-ref/
+		pwm0m0_pins: pwm0m0-pins {
+			rockchip,pins =
+				/* pwm0_m0 */
+				<0 RK_PC3 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm0m1_pins: pwm0m1-pins {
+			rockchip,pins =
+				/* pwm0_m1 */
+				<1 RK_PC5 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm1 {
+		/omit-if-no-ref/
+		pwm1m0_pins: pwm1m0-pins {
+			rockchip,pins =
+				/* pwm1_m0 */
+				<0 RK_PC4 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm1m1_pins: pwm1m1-pins {
+			rockchip,pins =
+				/* pwm1_m1 */
+				<1 RK_PC6 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm2 {
+		/omit-if-no-ref/
+		pwm2m0_pins: pwm2m0-pins {
+			rockchip,pins =
+				/* pwm2_m0 */
+				<0 RK_PC5 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm2m1_pins: pwm2m1-pins {
+			rockchip,pins =
+				/* pwm2_m1 */
+				<1 RK_PC7 3 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm3 {
+		/omit-if-no-ref/
+		pwm3m0_pins: pwm3m0-pins {
+			rockchip,pins =
+				/* pwm3_m0 */
+				<0 RK_PA7 1 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm3m1_pins: pwm3m1-pins {
+			rockchip,pins =
+				/* pwm3_m1 */
+				<1 RK_PD0 3 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm4 {
+		/omit-if-no-ref/
+		pwm4m0_pins: pwm4m0-pins {
+			rockchip,pins =
+				/* pwm4_m0 */
+				<0 RK_PB7 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm4m1_pins: pwm4m1-pins {
+			rockchip,pins =
+				/* pwm4_m1 */
+				<1 RK_PD1 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm5 {
+		/omit-if-no-ref/
+		pwm5m0_pins: pwm5m0-pins {
+			rockchip,pins =
+				/* pwm5_m0 */
+				<0 RK_PC2 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm5m1_pins: pwm5m1-pins {
+			rockchip,pins =
+				/* pwm5_m1 */
+				<1 RK_PD2 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm6 {
+		/omit-if-no-ref/
+		pwm6m0_pins: pwm6m0-pins {
+			rockchip,pins =
+				/* pwm6_m0 */
+				<0 RK_PC1 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm6m1_pins: pwm6m1-pins {
+			rockchip,pins =
+				/* pwm6_m1 */
+				<1 RK_PD3 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm7 {
+		/omit-if-no-ref/
+		pwm7m0_pins: pwm7m0-pins {
+			rockchip,pins =
+				/* pwm7_m0 */
+				<0 RK_PC0 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm7m1_pins: pwm7m1-pins {
+			rockchip,pins =
+				/* pwm7_m1 */
+				<1 RK_PD4 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm8 {
+		/omit-if-no-ref/
+		pwm8m0_pins: pwm8m0-pins {
+			rockchip,pins =
+				/* pwm8_m0 */
+				<3 RK_PA4 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm8m1_pins: pwm8m1-pins {
+			rockchip,pins =
+				/* pwm8_m1 */
+				<1 RK_PC1 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm9 {
+		/omit-if-no-ref/
+		pwm9m0_pins: pwm9m0-pins {
+			rockchip,pins =
+				/* pwm9_m0 */
+				<3 RK_PA5 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm9m1_pins: pwm9m1-pins {
+			rockchip,pins =
+				/* pwm9_m1 */
+				<1 RK_PC2 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm10 {
+		/omit-if-no-ref/
+		pwm10m0_pins: pwm10m0-pins {
+			rockchip,pins =
+				/* pwm10_m0 */
+				<1 RK_PB5 5 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm10m1_pins: pwm10m1-pins {
+			rockchip,pins =
+				/* pwm10_m1 */
+				<1 RK_PC3 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm11 {
+		/omit-if-no-ref/
+		pwm11m0_pins: pwm11m0-pins {
+			rockchip,pins =
+				/* pwm11_m0 */
+				<1 RK_PB6 5 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm11m1_pins: pwm11m1-pins {
+			rockchip,pins =
+				/* pwm11_m1 */
+				<1 RK_PC4 4 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm12 {
+		/omit-if-no-ref/
+		pwm12m0_pins: pwm12m0-pins {
+			rockchip,pins =
+				/* pwm12_m0 */
+				<4 RK_PA1 4 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm12m1_pins: pwm12m1-pins {
+			rockchip,pins =
+				/* pwm12_m1 */
+				<3 RK_PB4 5 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm13 {
+		/omit-if-no-ref/
+		pwm13m0_pins: pwm13m0-pins {
+			rockchip,pins =
+				/* pwm13_m0 */
+				<4 RK_PA4 3 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm13m1_pins: pwm13m1-pins {
+			rockchip,pins =
+				/* pwm13_m1 */
+				<3 RK_PB5 5 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm14 {
+		/omit-if-no-ref/
+		pwm14m0_pins: pwm14m0-pins {
+			rockchip,pins =
+				/* pwm14_m0 */
+				<3 RK_PC5 4 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm14m1_pins: pwm14m1-pins {
+			rockchip,pins =
+				/* pwm14_m1 */
+				<1 RK_PD7 5 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwm15 {
+		/omit-if-no-ref/
+		pwm15m0_pins: pwm15m0-pins {
+			rockchip,pins =
+				/* pwm15_m0 */
+				<3 RK_PC6 4 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		pwm15m1_pins: pwm15m1-pins {
+			rockchip,pins =
+				/* pwm15_m1 */
+				<2 RK_PA0 5 &pcfg_pull_none_drv_level_1>;
+		};
+	};
+
+	pwr {
+		/omit-if-no-ref/
+		pwr_pins: pwr-pins {
+			rockchip,pins =
+				/* pwr_ctrl0 */
+				<0 RK_PA2 1 &pcfg_pull_none>,
+				/* pwr_ctrl1 */
+				<0 RK_PA3 1 &pcfg_pull_none>;
+		};
+	};
+
+	ref {
+		/omit-if-no-ref/
+		ref_pins: ref-pins {
+			rockchip,pins =
+				/* ref_clk_out */
+				<0 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	rgmii {
+		/omit-if-no-ref/
+		rgmiim0_miim: rgmiim0-miim {
+			rockchip,pins =
+				/* rgmii_mdc_m0 */
+				<4 RK_PB2 2 &pcfg_pull_none>,
+				/* rgmii_mdio_m0 */
+				<4 RK_PB3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_rx_er: rgmiim0-rx_er {
+			rockchip,pins =
+				/* rgmii_rxer_m0 */
+				<4 RK_PB0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_rx_bus2: rgmiim0-rx_bus2 {
+			rockchip,pins =
+				/* rgmii_rxd0_m0 */
+				<4 RK_PA5 2 &pcfg_pull_none>,
+				/* rgmii_rxd1_m0 */
+				<4 RK_PA6 2 &pcfg_pull_none>,
+				/* rgmii_rxdv_m0 */
+				<4 RK_PA7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_tx_bus2: rgmiim0-tx_bus2 {
+			rockchip,pins =
+				/* rgmii_txd0_m0 */
+				<4 RK_PA2 2 &pcfg_pull_none>,
+				/* rgmii_txd1_m0 */
+				<4 RK_PA3 2 &pcfg_pull_none>,
+				/* rgmii_txen_m0 */
+				<4 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_rgmii_clk: rgmiim0-rgmii_clk {
+			rockchip,pins =
+				/* rgmii_rxclk_m0 */
+				<4 RK_PA1 2 &pcfg_pull_none>,
+				/* rgmii_txclk_m0 */
+				<3 RK_PD6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_rgmii_bus: rgmiim0-rgmii_bus {
+			rockchip,pins =
+				/* rgmii_rxd2_m0 */
+				<3 RK_PD7 2 &pcfg_pull_none>,
+				/* rgmii_rxd3_m0 */
+				<4 RK_PA0 2 &pcfg_pull_none>,
+				/* rgmii_txd2_m0 */
+				<3 RK_PD4 2 &pcfg_pull_none>,
+				/* rgmii_txd3_m0 */
+				<3 RK_PD5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim0_clk: rgmiim0-clk {
+			rockchip,pins =
+				/* rgmiim0_clk */
+				<4 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_miim: rgmiim1-miim {
+			rockchip,pins =
+				/* rgmii_mdc_m1 */
+				<1 RK_PC7 2 &pcfg_pull_none>,
+				/* rgmii_mdio_m1 */
+				<1 RK_PD0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_rx_er: rgmiim1-rx_er {
+			rockchip,pins =
+				/* rgmii_rxer_m1 */
+				<2 RK_PA0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_rx_bus2: rgmiim1-rx_bus2 {
+			rockchip,pins =
+				/* rgmii_rxd0_m1 */
+				<1 RK_PD4 2 &pcfg_pull_none>,
+				/* rgmii_rxd1_m1 */
+				<1 RK_PD7 2 &pcfg_pull_none>,
+				/* rgmii_rxdv_m1 */
+				<1 RK_PD6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_tx_bus2: rgmiim1-tx_bus2 {
+			rockchip,pins =
+				/* rgmii_txd0_m1 */
+				<1 RK_PD1 2 &pcfg_pull_none>,
+				/* rgmii_txd1_m1 */
+				<1 RK_PD2 2 &pcfg_pull_none>,
+				/* rgmii_txen_m1 */
+				<1 RK_PD3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_rgmii_clk: rgmiim1-rgmii_clk {
+			rockchip,pins =
+				/* rgmii_rxclk_m1 */
+				<1 RK_PC6 2 &pcfg_pull_none>,
+				/* rgmii_txclk_m1 */
+				<1 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_rgmii_bus: rgmiim1-rgmii_bus {
+			rockchip,pins =
+				/* rgmii_rxd2_m1 */
+				<1 RK_PC4 2 &pcfg_pull_none>,
+				/* rgmii_rxd3_m1 */
+				<1 RK_PC5 2 &pcfg_pull_none>,
+				/* rgmii_txd2_m1 */
+				<1 RK_PC1 2 &pcfg_pull_none>,
+				/* rgmii_txd3_m1 */
+				<1 RK_PC2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		rgmiim1_clk: rgmiim1-clk {
+			rockchip,pins =
+				/* rgmiim1_clk */
+				<1 RK_PD5 2 &pcfg_pull_none>;
+		};
+	};
+
+	rmii {
+		/omit-if-no-ref/
+		rmii_pins: rmii-pins {
+			rockchip,pins =
+				/* rmii_clk */
+				<1 RK_PD5 5 &pcfg_pull_none>,
+				/* rmii_mdc */
+				<1 RK_PC7 5 &pcfg_pull_none>,
+				/* rmii_mdio */
+				<1 RK_PD0 5 &pcfg_pull_none>,
+				/* rmii_rxd0 */
+				<1 RK_PD4 5 &pcfg_pull_none>,
+				/* rmii_rxd1 */
+				<1 RK_PD7 6 &pcfg_pull_none>,
+				/* rmii_rxdv_crs */
+				<1 RK_PD6 5 &pcfg_pull_none>,
+				/* rmii_rxer */
+				<2 RK_PA0 6 &pcfg_pull_none>,
+				/* rmii_txd0 */
+				<1 RK_PD1 5 &pcfg_pull_none>,
+				/* rmii_txd1 */
+				<1 RK_PD2 5 &pcfg_pull_none>,
+				/* rmii_txen */
+				<1 RK_PD3 5 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc0 {
+		/omit-if-no-ref/
+		sdmmc0_bus4: sdmmc0-bus4 {
+			rockchip,pins =
+				/* sdmmc0_d0 */
+				<1 RK_PB3 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d1 */
+				<1 RK_PB4 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d2 */
+				<1 RK_PB5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d3 */
+				<1 RK_PB6 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_clk: sdmmc0-clk {
+			rockchip,pins =
+				/* sdmmc0_clk */
+				<1 RK_PC0 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_cmd: sdmmc0-cmd {
+			rockchip,pins =
+				/* sdmmc0_cmd */
+				<1 RK_PB7 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_det: sdmmc0-det {
+			rockchip,pins =
+				/* sdmmc0_detn */
+				<0 RK_PA4 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_pwren: sdmmc0-pwren {
+			rockchip,pins =
+				/* sdmmc0_pwren */
+				<0 RK_PA5 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc1 {
+		/omit-if-no-ref/
+		sdmmc1_bus4: sdmmc1-bus4 {
+			rockchip,pins =
+				/* sdmmc1_d0 */
+				<1 RK_PC1 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d1 */
+				<1 RK_PC2 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d2 */
+				<1 RK_PC3 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d3 */
+				<1 RK_PC4 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_clk: sdmmc1-clk {
+			rockchip,pins =
+				/* sdmmc1_clk */
+				<1 RK_PC6 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_cmd: sdmmc1-cmd {
+			rockchip,pins =
+				/* sdmmc1_cmd */
+				<1 RK_PC5 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_det: sdmmc1-det {
+			rockchip,pins =
+				/* sdmmc1_detn */
+				<1 RK_PD0 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_pwren: sdmmc1-pwren {
+			rockchip,pins =
+				/* sdmmc1_pwren */
+				<1 RK_PC7 1 &pcfg_pull_none>;
+		};
+	};
+
+	spdif {
+		/omit-if-no-ref/
+		spdifm0_pins: spdifm0-pins {
+			rockchip,pins =
+				/* spdif_tx_m0 */
+				<3 RK_PA1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdifm1_pins: spdifm1-pins {
+			rockchip,pins =
+				/* spdif_tx_m1 */
+				<0 RK_PB7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdifm2_pins: spdifm2-pins {
+			rockchip,pins =
+				/* spdif_tx_m2 */
+				<1 RK_PB7 2 &pcfg_pull_none>;
+		};
+	};
+
+	spi0 {
+		/omit-if-no-ref/
+		spi0m0_pins: spi0m0-pins {
+			rockchip,pins =
+				/* spi0_clk_m0 */
+				<0 RK_PC3 3 &pcfg_pull_none_drv_level_3>,
+				/* spi0_miso_m0 */
+				<0 RK_PC5 3 &pcfg_pull_none_drv_level_3>,
+				/* spi0_mosi_m0 */
+				<0 RK_PC4 3 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_csn0: spi0m0-csn0 {
+			rockchip,pins =
+				/* spi0m0_csn0 */
+				<0 RK_PC2 3 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi0m0_csn1: spi0m0-csn1 {
+			rockchip,pins =
+				/* spi0m0_csn1 */
+				<0 RK_PB7 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_pins: spi0m1-pins {
+			rockchip,pins =
+				/* spi0_clk_m1 */
+				<3 RK_PB5 4 &pcfg_pull_none_drv_level_3>,
+				/* spi0_miso_m1 */
+				<3 RK_PC0 4 &pcfg_pull_none_drv_level_3>,
+				/* spi0_mosi_m1 */
+				<3 RK_PB4 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_csn0: spi0m1-csn0 {
+			rockchip,pins =
+				/* spi0m1_csn0 */
+				<3 RK_PB7 4 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi0m1_csn1: spi0m1-csn1 {
+			rockchip,pins =
+				/* spi0m1_csn1 */
+				<3 RK_PB6 4 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+
+	spi1 {
+		/omit-if-no-ref/
+		spi1m0_pins: spi1m0-pins {
+			rockchip,pins =
+				/* spi1_clk_m0 */
+				<3 RK_PD6 4 &pcfg_pull_none_drv_level_3>,
+				/* spi1_miso_m0 */
+				<4 RK_PA3 4 &pcfg_pull_none_drv_level_3>,
+				/* spi1_mosi_m0 */
+				<4 RK_PA2 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_csn0: spi1m0-csn0 {
+			rockchip,pins =
+				/* spi1m0_csn0 */
+				<3 RK_PD7 4 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi1m0_csn1: spi1m0-csn1 {
+			rockchip,pins =
+				/* spi1m0_csn1 */
+				<4 RK_PA0 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_pins: spi1m1-pins {
+			rockchip,pins =
+				/* spi1_clk_m1 */
+				<1 RK_PC0 4 &pcfg_pull_none_drv_level_3>,
+				/* spi1_miso_m1 */
+				<1 RK_PB4 4 &pcfg_pull_none_drv_level_3>,
+				/* spi1_mosi_m1 */
+				<1 RK_PB3 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_csn0: spi1m1-csn0 {
+			rockchip,pins =
+				/* spi1m1_csn0 */
+				<1 RK_PB6 4 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi1m1_csn1: spi1m1-csn1 {
+			rockchip,pins =
+				/* spi1m1_csn1 */
+				<1 RK_PB5 4 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+
+	spi2 {
+		/omit-if-no-ref/
+		spi2m0_pins: spi2m0-pins {
+			rockchip,pins =
+				/* spi2_clk_m0 */
+				<4 RK_PB6 4 &pcfg_pull_none_drv_level_3>,
+				/* spi2_miso_m0 */
+				<3 RK_PD2 4 &pcfg_pull_none_drv_level_3>,
+				/* spi2_mosi_m0 */
+				<3 RK_PD3 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_csn0: spi2m0-csn0 {
+			rockchip,pins =
+				/* spi2m0_csn0 */
+				<4 RK_PB5 4 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi2m0_csn1: spi2m0-csn1 {
+			rockchip,pins =
+				/* spi2m0_csn1 */
+				<4 RK_PB4 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_pins: spi2m1-pins {
+			rockchip,pins =
+				/* spi2_clk_m1 */
+				<2 RK_PA1 4 &pcfg_pull_none_drv_level_3>,
+				/* spi2_miso_m1 */
+				<2 RK_PA0 4 &pcfg_pull_none_drv_level_3>,
+				/* spi2_mosi_m1 */
+				<1 RK_PD7 4 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_csn0: spi2m1-csn0 {
+			rockchip,pins =
+				/* spi2m1_csn0 */
+				<1 RK_PD6 4 &pcfg_pull_none_drv_level_3>;
+		};
+		/omit-if-no-ref/
+		spi2m1_csn1: spi2m1-csn1 {
+			rockchip,pins =
+				/* spi2m1_csn1 */
+				<1 RK_PD5 4 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+
+	tsadc {
+		/omit-if-no-ref/
+		tsadcm0_pins: tsadcm0-pins {
+			rockchip,pins =
+				/* tsadc_shut_m0 */
+				<0 RK_PA1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadcm1_pins: tsadcm1-pins {
+			rockchip,pins =
+				/* tsadc_shut_m1 */
+				<0 RK_PA2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadc_shut_org: tsadc-shut-org {
+			rockchip,pins =
+				/* tsadc_shut_org */
+				<0 RK_PA1 2 &pcfg_pull_none>;
+		};
+	};
+
+	uart0 {
+		/omit-if-no-ref/
+		uart0m0_xfer: uart0m0-xfer {
+			rockchip,pins =
+				/* uart0_rx_m0 */
+				<0 RK_PD0 1 &pcfg_pull_up>,
+				/* uart0_tx_m0 */
+				<0 RK_PD1 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0m1_xfer: uart0m1-xfer {
+			rockchip,pins =
+				/* uart0_rx_m1 */
+				<1 RK_PB3 2 &pcfg_pull_up>,
+				/* uart0_tx_m1 */
+				<1 RK_PB4 2 &pcfg_pull_up>;
+		};
+	};
+
+	uart1 {
+		/omit-if-no-ref/
+		uart1m0_xfer: uart1m0-xfer {
+			rockchip,pins =
+				/* uart1_rx_m0 */
+				<1 RK_PD1 1 &pcfg_pull_up>,
+				/* uart1_tx_m0 */
+				<1 RK_PD2 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m0_ctsn: uart1m0-ctsn {
+			rockchip,pins =
+				/* uart1m0_ctsn */
+				<1 RK_PD4 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart1m0_rtsn: uart1m0-rtsn {
+			rockchip,pins =
+				/* uart1m0_rtsn */
+				<1 RK_PD3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_xfer: uart1m1-xfer {
+			rockchip,pins =
+				/* uart1_rx_m1 */
+				<4 RK_PA6 3 &pcfg_pull_up>,
+				/* uart1_tx_m1 */
+				<4 RK_PA5 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_ctsn: uart1m1-ctsn {
+			rockchip,pins =
+				/* uart1m1_ctsn */
+				<4 RK_PB0 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart1m1_rtsn: uart1m1-rtsn {
+			rockchip,pins =
+				/* uart1m1_rtsn */
+				<4 RK_PA7 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart2 {
+		/omit-if-no-ref/
+		uart2m0_xfer: uart2m0-xfer {
+			rockchip,pins =
+				/* uart2_rx_m0 */
+				<0 RK_PC1 1 &pcfg_pull_up>,
+				/* uart2_tx_m0 */
+				<0 RK_PC0 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m0_ctsn: uart2m0-ctsn {
+			rockchip,pins =
+				/* uart2m0_ctsn */
+				<0 RK_PC2 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart2m0_rtsn: uart2m0-rtsn {
+			rockchip,pins =
+				/* uart2m0_rtsn */
+				<0 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart2m1_xfer: uart2m1-xfer {
+			rockchip,pins =
+				/* uart2_rx_m1 */
+				<3 RK_PA1 2 &pcfg_pull_up>,
+				/* uart2_tx_m1 */
+				<3 RK_PA0 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m1_ctsn: uart2m1-ctsn {
+			rockchip,pins =
+				/* uart2m1_ctsn */
+				<3 RK_PA2 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart2m1_rtsn: uart2m1-rtsn {
+			rockchip,pins =
+				/* uart2m1_rtsn */
+				<3 RK_PA3 2 &pcfg_pull_none>;
+		};
+	};
+
+	uart3 {
+		/omit-if-no-ref/
+		uart3m0_xfer: uart3m0-xfer {
+			rockchip,pins =
+				/* uart3_rx_m0 */
+				<4 RK_PB5 6 &pcfg_pull_up>,
+				/* uart3_tx_m0 */
+				<4 RK_PB4 6 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m0_ctsn: uart3m0-ctsn {
+			rockchip,pins =
+				/* uart3m0_ctsn */
+				<4 RK_PB6 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart3m0_rtsn: uart3m0-rtsn {
+			rockchip,pins =
+				/* uart3m0_rtsn */
+				<3 RK_PD1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart3m1_xfer: uart3m1-xfer {
+			rockchip,pins =
+				/* uart3_rx_m1 */
+				<3 RK_PC0 3 &pcfg_pull_up>,
+				/* uart3_tx_m1 */
+				<3 RK_PB7 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m1_ctsn: uart3m1-ctsn {
+			rockchip,pins =
+				/* uart3m1_ctsn */
+				<3 RK_PB6 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart3m1_rtsn: uart3m1-rtsn {
+			rockchip,pins =
+				/* uart3m1_rtsn */
+				<3 RK_PC1 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart4 {
+		/omit-if-no-ref/
+		uart4m0_xfer: uart4m0-xfer {
+			rockchip,pins =
+				/* uart4_rx_m0 */
+				<3 RK_PD1 3 &pcfg_pull_up>,
+				/* uart4_tx_m0 */
+				<3 RK_PD0 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4m0_ctsn: uart4m0-ctsn {
+			rockchip,pins =
+				/* uart4m0_ctsn */
+				<3 RK_PC5 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart4m0_rtsn: uart4m0-rtsn {
+			rockchip,pins =
+				/* uart4m0_rtsn */
+				<3 RK_PC6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart4m1_xfer: uart4m1-xfer {
+			rockchip,pins =
+				/* uart4_rx_m1 */
+				<1 RK_PD5 3 &pcfg_pull_up>,
+				/* uart4_tx_m1 */
+				<1 RK_PD6 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4m1_ctsn: uart4m1-ctsn {
+			rockchip,pins =
+				/* uart4m1_ctsn */
+				<2 RK_PA0 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart4m1_rtsn: uart4m1-rtsn {
+			rockchip,pins =
+				/* uart4m1_rtsn */
+				<1 RK_PD7 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart5 {
+		/omit-if-no-ref/
+		uart5m0_xfer: uart5m0-xfer {
+			rockchip,pins =
+				/* uart5_rx_m0 */
+				<1 RK_PB7 3 &pcfg_pull_up>,
+				/* uart5_tx_m0 */
+				<1 RK_PC0 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_ctsn: uart5m0-ctsn {
+			rockchip,pins =
+				/* uart5m0_ctsn */
+				<1 RK_PB5 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart5m0_rtsn: uart5m0-rtsn {
+			rockchip,pins =
+				/* uart5m0_rtsn */
+				<1 RK_PB6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_xfer: uart5m1-xfer {
+			rockchip,pins =
+				/* uart5_rx_m1 */
+				<3 RK_PA7 5 &pcfg_pull_up>,
+				/* uart5_tx_m1 */
+				<3 RK_PA6 5 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_ctsn: uart5m1-ctsn {
+			rockchip,pins =
+				/* uart5m1_ctsn */
+				<3 RK_PA0 5 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart5m1_rtsn: uart5m1-rtsn {
+			rockchip,pins =
+				/* uart5m1_rtsn */
+				<3 RK_PA1 5 &pcfg_pull_none>;
+		};
+	};
+
+	uart6 {
+		/omit-if-no-ref/
+		uart6m0_xfer: uart6m0-xfer {
+			rockchip,pins =
+				/* uart6_rx_m0 */
+				<0 RK_PC7 1 &pcfg_pull_up>,
+				/* uart6_tx_m0 */
+				<0 RK_PC6 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m0_ctsn: uart6m0-ctsn {
+			rockchip,pins =
+				/* uart6m0_ctsn */
+				<0 RK_PC4 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart6m0_rtsn: uart6m0-rtsn {
+			rockchip,pins =
+				/* uart6m0_rtsn */
+				<0 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_xfer: uart6m1-xfer {
+			rockchip,pins =
+				/* uart6_rx_m1 */
+				<4 RK_PB0 5 &pcfg_pull_up>,
+				/* uart6_tx_m1 */
+				<4 RK_PA7 5 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_ctsn: uart6m1-ctsn {
+			rockchip,pins =
+				/* uart6m1_ctsn */
+				<4 RK_PA2 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart6m1_rtsn: uart6m1-rtsn {
+			rockchip,pins =
+				/* uart6m1_rtsn */
+				<4 RK_PA3 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart7 {
+		/omit-if-no-ref/
+		uart7m0_xfer: uart7m0-xfer {
+			rockchip,pins =
+				/* uart7_rx_m0 */
+				<3 RK_PC7 3 &pcfg_pull_up>,
+				/* uart7_tx_m0 */
+				<3 RK_PC4 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_ctsn: uart7m0-ctsn {
+			rockchip,pins =
+				/* uart7m0_ctsn */
+				<3 RK_PD2 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart7m0_rtsn: uart7m0-rtsn {
+			rockchip,pins =
+				/* uart7m0_rtsn */
+				<3 RK_PD3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m1_xfer: uart7m1-xfer {
+			rockchip,pins =
+				/* uart7_rx_m1 */
+				<1 RK_PB3 3 &pcfg_pull_up>,
+				/* uart7_tx_m1 */
+				<1 RK_PB4 3 &pcfg_pull_up>;
+		};
+	};
+
+	uart8 {
+		/omit-if-no-ref/
+		uart8m0_xfer: uart8m0-xfer {
+			rockchip,pins =
+				/* uart8_rx_m0 */
+				<3 RK_PB3 3 &pcfg_pull_up>,
+				/* uart8_tx_m0 */
+				<3 RK_PB2 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart8m0_ctsn: uart8m0-ctsn {
+			rockchip,pins =
+				/* uart8m0_ctsn */
+				<3 RK_PB4 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart8m0_rtsn: uart8m0-rtsn {
+			rockchip,pins =
+				/* uart8m0_rtsn */
+				<3 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_xfer: uart8m1-xfer {
+			rockchip,pins =
+				/* uart8_rx_m1 */
+				<3 RK_PD5 3 &pcfg_pull_up>,
+				/* uart8_tx_m1 */
+				<3 RK_PD4 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_ctsn: uart8m1-ctsn {
+			rockchip,pins =
+				/* uart8m1_ctsn */
+				<3 RK_PD7 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart8m1_rtsn: uart8m1-rtsn {
+			rockchip,pins =
+				/* uart8m1_rtsn */
+				<4 RK_PA0 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart9 {
+		/omit-if-no-ref/
+		uart9m0_xfer: uart9m0-xfer {
+			rockchip,pins =
+				/* uart9_rx_m0 */
+				<4 RK_PB3 3 &pcfg_pull_up>,
+				/* uart9_tx_m0 */
+				<4 RK_PB2 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m0_ctsn: uart9m0-ctsn {
+			rockchip,pins =
+				/* uart9m0_ctsn */
+				<4 RK_PB4 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart9m0_rtsn: uart9m0-rtsn {
+			rockchip,pins =
+				/* uart9m0_rtsn */
+				<4 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m1_xfer: uart9m1-xfer {
+			rockchip,pins =
+				/* uart9_rx_m1 */
+				<3 RK_PC3 3 &pcfg_pull_up>,
+				/* uart9_tx_m1 */
+				<3 RK_PC2 3 &pcfg_pull_up>;
+		};
+	};
+
+	vo {
+		/omit-if-no-ref/
+		vo_pins: vo-pins {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d0 */
+				<4 RK_PA4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d1 */
+				<4 RK_PA5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d2 */
+				<4 RK_PB2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d8 */
+				<4 RK_PA6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d9 */
+				<4 RK_PA7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d13 */
+				<3 RK_PD4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d14 */
+				<3 RK_PD5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d15 */
+				<3 RK_PD6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d16 */
+				<4 RK_PB0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d17 */
+				<4 RK_PB1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d18 */
+				<4 RK_PB3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d19 */
+				<3 RK_PD7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d20 */
+				<4 RK_PA0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d21 */
+				<4 RK_PA1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d22 */
+				<4 RK_PA2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d23 */
+				<4 RK_PA3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_den */
+				<4 RK_PB6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_hsync */
+				<4 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_vsync */
+				<4 RK_PB5 1 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+};
+
+/*
+ * This part is edited handly.
+ */
+&pinctrl {
+	vo {
+		/omit-if-no-ref/
+		bt1120_pins: bt1120-pins {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d13 */
+				<3 RK_PD4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d14 */
+				<3 RK_PD5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d15 */
+				<3 RK_PD6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d19 */
+				<3 RK_PD7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d20 */
+				<4 RK_PA0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d21 */
+				<4 RK_PA1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d22 */
+				<4 RK_PA2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d23 */
+				<4 RK_PA3 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		bt656_pins: bt656-pins {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		rgb3x8_pins_m0: rgb3x8-pins-m0 {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_den */
+				<4 RK_PB6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_hsync */
+				<4 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_vsync */
+				<4 RK_PB5 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		rgb3x8_pins_m1: rgb3x8-pins-m1 {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d13 */
+				<3 RK_PD4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d14 */
+				<3 RK_PD5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d15 */
+				<3 RK_PD6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d19 */
+				<3 RK_PD7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d20 */
+				<4 RK_PA0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d21 */
+				<4 RK_PA1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d22 */
+				<4 RK_PA2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d23 */
+				<4 RK_PA3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_den */
+				<4 RK_PB6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_hsync */
+				<4 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_vsync */
+				<4 RK_PB5 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		rgb565_pins: rgb565-pins {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d13 */
+				<3 RK_PD4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d14 */
+				<3 RK_PD5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d15 */
+				<3 RK_PD6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d19 */
+				<3 RK_PD7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d20 */
+				<4 RK_PA0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d21 */
+				<4 RK_PA1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d22 */
+				<4 RK_PA2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d23 */
+				<4 RK_PA3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_den */
+				<4 RK_PB6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_hsync */
+				<4 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_vsync */
+				<4 RK_PB5 1 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		rgb666_pins: rgb666-pins {
+			rockchip,pins =
+				/* vo_lcdc_clk */
+				<4 RK_PB7 1 &pcfg_pull_none_drv_level_4>,
+				/* vo_lcdc_d2 */
+				<4 RK_PB2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d3 */
+				<3 RK_PC4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d4 */
+				<3 RK_PC5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d5 */
+				<3 RK_PC6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d6 */
+				<3 RK_PC7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d7 */
+				<3 RK_PD0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d10 */
+				<3 RK_PD1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d11 */
+				<3 RK_PD2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d12 */
+				<3 RK_PD3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d13 */
+				<3 RK_PD4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d14 */
+				<3 RK_PD5 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d15 */
+				<3 RK_PD6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d18 */
+				<4 RK_PB3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d19 */
+				<3 RK_PD7 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d20 */
+				<4 RK_PA0 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d21 */
+				<4 RK_PA1 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d22 */
+				<4 RK_PA2 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_d23 */
+				<4 RK_PA3 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_den */
+				<4 RK_PB6 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_hsync */
+				<4 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* vo_lcdc_vsync */
+				<4 RK_PB5 1 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3562.dtsi b/arch/arm64/boot/dts/rockchip/rk3562.dtsi
new file mode 100644
index 000000000000..f84676b47b27
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3562.dtsi
@@ -0,0 +1,1186 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rockchip,rk3562-cru.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/rockchip,rk3562-power.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/reset/rockchip,rk3562-cru.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3562";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+	};
+
+	xin32k: clock-xin32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+
+	xin24m: clock-xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&scmi_clk ARMCLK>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <138>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			clocks = <&scmi_clk ARMCLK>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <138>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			clocks = <&scmi_clk ARMCLK>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <138>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			clocks = <&scmi_clk ARMCLK>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <138>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000 825000 1150000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000 825000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <825000 825000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <850000 850000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <925000 925000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1000000 1000000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1608000000 {
+			opp-supported-hw = <0xf9 0xffff>;
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1037500 1037500 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1125000 1125000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <1150000 1150000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <825000 825000 1000000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000 825000 1000000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <825000 825000 1000000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000 825000 1000000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <900000 900000 1000000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <950000 950000 1000000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000 1000000 1000000>;
+		};
+	};
+
+	arm_pmu: arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			shmem = <&scmi_shmem>;
+			arm,smc-id = <0x82000010>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3562-pinctrl";
+		rockchip,grf = <&ioc_grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff260000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff260000 0x0 0x100>;
+			clocks = <&cru PCLK_PMU0_GPIO0>, <&cru DBCLK_PMU0_GPIO0>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff620000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff620000 0x0 0x100>;
+			clocks = <&cru PCLK_PERI_GPIO1>, <&cru DCLK_PERI_GPIO1>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff630000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff630000 0x0 0x100>;
+			clocks = <&cru PCLK_PERI_GPIO2>, <&cru DCLK_PERI_GPIO2>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ffac0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffac0000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO3_VCCIO156>, <&cru DCLK_BUS_GPIO3>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@ffad0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffad0000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO4_VCCIO156>, <&cru DCLK_BUS_GPIO4>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scmi_shmem: shmem@10f000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x0010f000 0x0 0x100>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie2x1: pcie@fe000000 {
+			compatible = "rockchip,rk3562-pcie", "rockchip,rk3568-pcie";
+			reg = <0x0 0xfe000000 0x0 0x400000>,
+			      <0x0 0xff500000 0x0 0x10000>,
+			      <0x0 0xfc000000 0x0 0x100000>;
+			reg-names = "dbi", "apb", "config";
+			bus-range = <0x0 0xff>;
+			clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
+				 <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
+				 <&cru CLK_PCIE20_AUX>;
+			clock-names = "aclk_mst", "aclk_slv",
+				      "aclk_dbi", "pclk", "aux";
+			device_type = "pci";
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie2x1_intc 0>,
+					<0 0 0 2 &pcie2x1_intc 1>,
+					<0 0 0 3 &pcie2x1_intc 2>,
+					<0 0 0 4 &pcie2x1_intc 3>;
+			linux,pci-domain = <0>;
+			max-link-speed = <2>;
+			num-ib-windows = <8>;
+			num-viewport = <8>;
+			num-ob-windows = <2>;
+			num-lanes = <1>;
+			phys = <&combphy PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&power RK3562_PD_PHP>;
+			ranges = <0x01000000 0x0 0xfc100000 0x0 0xfc100000 0x0 0x100000
+				  0x02000000 0x0 0xfc200000 0x0 0xfc200000 0x0 0x1e00000
+				  0x03000000 0x3 0x00000000 0x3 0x00000000 0x0 0x40000000>;
+			resets = <&cru SRST_PCIE20_POWERUP>;
+			reset-names = "pipe";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			pcie2x1_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gic: interrupt-controller@fe901000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfe901000 0 0x1000>,
+			      <0x0 0xfe902000 0 0x2000>,
+			      <0x0 0xfe904000 0 0x2000>,
+			      <0x0 0xfe906000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		qos_dma2ddr: qos@fee03800 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee03800 0x0 0x20>;
+		};
+
+		qos_mcu: qos@fee10000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee10000 0x0 0x20>;
+		};
+
+		qos_dft_apb: qos@fee10100 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee10100 0x0 0x20>;
+		};
+
+		qos_gmac: qos@fee10200 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee10200 0x0 0x20>;
+		};
+
+		qos_mac100: qos@fee10300 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee10300 0x0 0x20>;
+		};
+
+		qos_dcf: qos@fee10400 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee10400 0x0 0x20>;
+		};
+
+		qos_cpu: qos@fee20000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee20000 0x0 0x20>;
+		};
+
+		qos_gpu: qos@fee30000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee30000 0x0 0x20>;
+		};
+
+		qos_npu: qos@fee40000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee40000 0x0 0x20>;
+		};
+
+		qos_rkvdec: qos@fee50000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee50000 0x0 0x20>;
+		};
+
+		qos_vepu: qos@fee60000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee60000 0x0 0x20>;
+		};
+
+		qos_isp: qos@fee70000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee70000 0x0 0x20>;
+		};
+
+		qos_vicap: qos@fee70100 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee70100 0x0 0x20>;
+		};
+
+		qos_vop: qos@fee80000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee80000 0x0 0x20>;
+		};
+
+		qos_jpeg: qos@fee90000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee90000 0x0 0x20>;
+		};
+
+		qos_rga_rd: qos@fee90100 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee90100 0x0 0x20>;
+		};
+
+		qos_rga_wr: qos@fee90200 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfee90200 0x0 0x20>;
+		};
+
+		qos_pcie: qos@feea0000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeea0000 0x0 0x20>;
+		};
+
+		qos_usb3: qos@feea0100 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeea0100 0x0 0x20>;
+		};
+
+		qos_crypto_apb: qos@feeb0000 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0000 0x0 0x20>;
+		};
+
+		qos_crypto: qos@feeb0100 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0100 0x0 0x20>;
+		};
+
+		qos_dmac: qos@feeb0200 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0200 0x0 0x20>;
+		};
+
+		qos_emmc: qos@feeb0300 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0300 0x0 0x20>;
+		};
+
+		qos_fspi: qos@feeb0400 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0400 0x0 0x20>;
+		};
+
+		qos_rkdma: qos@feeb0500 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0500 0x0 0x20>;
+		};
+
+		qos_sdmmc0: qos@feeb0600 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0600 0x0 0x20>;
+		};
+
+		qos_sdmmc1: qos@feeb0700 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0700 0x0 0x20>;
+		};
+
+		qos_usb2: qos@feeb0800 {
+			compatible = "rockchip,rk3562-qos", "syscon";
+			reg = <0x0 0xfeeb0800 0x0 0x20>;
+		};
+
+		pmu_grf: syscon@ff010000 {
+			compatible = "rockchip,rk3562-pmu-grf", "syscon", "simple-mfd";
+			reg = <0x0 0xff010000 0x0 0x10000>;
+
+			reboot_mode: reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x220>;
+				mode-normal = <BOOT_NORMAL>;
+				mode-loader = <BOOT_BL_DOWNLOAD>;
+				mode-recovery = <BOOT_RECOVERY>;
+				mode-bootloader = <BOOT_FASTBOOT>;
+			};
+		};
+
+		sys_grf: syscon@ff030000 {
+			compatible = "rockchip,rk3562-sys-grf", "syscon";
+			reg = <0x0 0xff030000 0x0 0x10000>;
+		};
+
+		peri_grf: syscon@ff040000 {
+			compatible = "rockchip,rk3562-peri-grf", "syscon";
+			reg = <0x0 0xff040000 0x0 0x10000>;
+		};
+
+		ioc_grf: syscon@ff060000 {
+			compatible = "rockchip,rk3562-ioc-grf", "syscon";
+			reg = <0x0 0xff060000 0x0 0x30000>;
+		};
+
+		usbphy_grf: syscon@ff090000 {
+			compatible = "rockchip,rk3562-usbphy-grf", "syscon";
+			reg = <0x0 0xff090000 0x0 0x8000>;
+		};
+
+		pipephy_grf: syscon@ff098000 {
+			compatible = "rockchip,rk3562-pipephy-grf", "syscon";
+			reg = <0x0 0xff098000 0x0 0x8000>;
+		};
+
+		cru: clock-controller@ff100000 {
+			compatible = "rockchip,rk3562-cru";
+			reg = <0x0 0xff100000 0x0 0x40000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+					  <&cru PLL_HPLL>;
+			assigned-clock-rates = <1188000000>, <1000000000>,
+					       <983040000>;
+		};
+
+		i2c0: i2c@ff200000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+			clocks = <&cru CLK_PMU0_I2C0>, <&cru PCLK_PMU0_I2C0>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		uart0: serial@ff210000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff210000 0x0 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_PMU1_UART0>, <&cru PCLK_PMU1_UART0>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		spi0: spi@ff220000 {
+			compatible = "rockchip,rk3562-spi", "rockchip,rk3066-spi";
+			reg = <0x0 0xff220000 0x0 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_PMU1_SPI0>, <&cru PCLK_PMU1_SPI0>;
+			clock-names = "spiclk", "apb_pclk";
+			dmas = <&dmac 13>, <&dmac 12>;
+			dma-names = "tx", "rx";
+			num-cs = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0m0_csn0 &spi0m0_csn1 &spi0m0_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@ff230000 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff230000 0x0 0x10>;
+			clocks = <&cru CLK_PMU1_PWM0>, <&cru PCLK_PMU1_PWM0>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm0m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@ff230010 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff230010 0x0 0x10>;
+			clocks = <&cru CLK_PMU1_PWM0>, <&cru PCLK_PMU1_PWM0>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm1m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@ff230020 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff230020 0x0 0x10>;
+			clocks = <&cru CLK_PMU1_PWM0>, <&cru PCLK_PMU1_PWM0>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm2m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@ff230030 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff230030 0x0 0x10>;
+			clocks = <&cru CLK_PMU1_PWM0>, <&cru PCLK_PMU1_PWM0>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm3m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pmu: power-management@ff258000 {
+			compatible = "rockchip,rk3562-pmu", "syscon", "simple-mfd";
+			reg = <0x0 0xff258000 0x0 0x1000>;
+
+			power: power-controller {
+				compatible = "rockchip,rk3562-power-controller";
+				#power-domain-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				power-domain@RK3562_PD_GPU {
+					reg = <RK3562_PD_GPU>;
+					pm_qos = <&qos_gpu>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@RK3562_PD_NPU {
+					reg = <RK3562_PD_NPU>;
+					pm_qos = <&qos_npu>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@RK3562_PD_VDPU {
+					reg = <RK3562_PD_VDPU>;
+					pm_qos = <&qos_rkvdec>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@RK3562_PD_VI {
+					reg = <RK3562_PD_VI>;
+					pm_qos = <&qos_isp>,
+						 <&qos_vicap>;
+					#power-domain-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@RK3562_PD_VEPU {
+						reg = <RK3562_PD_VEPU>;
+						pm_qos = <&qos_vepu>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				power-domain@RK3562_PD_VO {
+					reg = <RK3562_PD_VO>;
+					pm_qos = <&qos_vop>;
+					#power-domain-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@RK3562_PD_RGA {
+						reg = <RK3562_PD_RGA>;
+						pm_qos = <&qos_rga_rd>,
+							 <&qos_rga_wr>,
+							 <&qos_jpeg>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				power-domain@RK3562_PD_PHP {
+					reg = <RK3562_PD_PHP>;
+					pm_qos = <&qos_pcie>,
+						 <&qos_usb3>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+
+		gpu: gpu@ff320000 {
+			compatible = "rockchip,rk3562-mali", "arm,mali-bifrost";
+			reg = <0x0 0xff320000 0x0 0x4000>;
+			clocks = <&cru CLK_GPU>, <&cru CLK_GPU_BRG>,
+				 <&cru ACLK_GPU_PRE>;
+			clock-names = "clk_gpu", "clk_gpu_brg", "aclk_gpu";
+			dynamic-power-coefficient = <820>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&power RK3562_PD_GPU>;
+			#cooling-cells = <2>;
+			status = "disabled";
+		};
+
+		spi1: spi@ff640000 {
+			compatible = "rockchip,rk3066-spi";
+			reg = <0x0 0xff640000 0x0 0x1000>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+			clock-names = "spiclk", "apb_pclk";
+			dmas = <&dmac 15>, <&dmac 14>;
+			dma-names = "tx", "rx";
+			num-cs = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1m0_csn0 &spi1m0_csn1 &spi1m0_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@ff650000 {
+			compatible = "rockchip,rk3066-spi";
+			reg = <0x0 0xff650000 0x0 0x1000>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
+			clock-names = "spiclk", "apb_pclk";
+			dmas = <&dmac 17>, <&dmac 16>;
+			dma-names = "tx", "rx";
+			num-cs = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2m0_csn0 &spi2m0_csn1 &spi2m0_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		uart1: serial@ff670000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff670000 0x0 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@ff680000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff680000 0x0 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@ff690000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff690000 0x0 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart4: serial@ff6a0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart5: serial@ff6b0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart6: serial@ff6c0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart7: serial@ff6d0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6d0000 0x0 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart8: serial@ff6e0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart9: serial@ff6f0000 {
+			compatible = "rockchip,rk3562-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xff6f0000 0x0 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@ff700000 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff700000 0x0 0x10>;
+			clocks = <&cru CLK_PWM1_PERI>, <&cru PCLK_PWM1_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm4m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@ff700010 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff700010 0x0 0x10>;
+			clocks = <&cru CLK_PWM1_PERI>, <&cru PCLK_PWM1_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm5m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@ff700020 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff700020 0x0 0x10>;
+			clocks = <&cru CLK_PWM1_PERI>, <&cru PCLK_PWM1_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm6m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@ff700030 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff700030 0x0 0x10>;
+			clocks = <&cru CLK_PWM1_PERI>, <&cru PCLK_PWM1_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm7m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm8: pwm@ff710000 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff710000 0x0 0x10>;
+			clocks = <&cru CLK_PWM2_PERI>, <&cru PCLK_PWM2_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm8m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm9: pwm@ff710010 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff710010 0x0 0x10>;
+			clocks = <&cru CLK_PWM2_PERI>, <&cru PCLK_PWM2_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm9m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm10: pwm@ff710020 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff710020 0x0 0x10>;
+			clocks = <&cru CLK_PWM2_PERI>, <&cru PCLK_PWM2_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm10m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm11: pwm@ff710030 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff710030 0x0 0x10>;
+			clocks = <&cru CLK_PWM2_PERI>, <&cru PCLK_PWM2_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm11m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm12: pwm@ff720000 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff720000 0x0 0x10>;
+			clocks = <&cru CLK_PWM3_PERI>, <&cru PCLK_PWM3_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm12m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm13: pwm@ff720010 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff720010 0x0 0x10>;
+			clocks = <&cru CLK_PWM3_PERI>, <&cru PCLK_PWM3_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm13m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm14: pwm@ff720020 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff720020 0x0 0x10>;
+			clocks = <&cru CLK_PWM3_PERI>, <&cru PCLK_PWM3_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm14m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm15: pwm@ff720030 {
+			compatible = "rockchip,rk3562-pwm", "rockchip,rk3328-pwm";
+			reg = <0x0 0xff720030 0x0 0x10>;
+			clocks = <&cru CLK_PWM3_PERI>, <&cru PCLK_PWM3_PERI>;
+			clock-names = "pwm", "pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm15m0_pins>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		saradc0: adc@ff730000 {
+			compatible = "rockchip,rk3562-saradc";
+			reg = <0x0 0xff730000 0x0 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+			clock-names = "saradc", "apb_pclk";
+			resets = <&cru SRST_P_SARADC>;
+			reset-names = "saradc-apb";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		combphy: phy@ff750000 {
+			compatible = "rockchip,rk3562-naneng-combphy";
+			reg = <0x0 0xff750000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&cru CLK_PIPEPHY_REF>, <&cru PCLK_PIPEPHY>,
+				 <&cru PCLK_PHP>;
+			clock-names = "ref", "apb", "pipe";
+			assigned-clocks = <&cru CLK_PIPEPHY_REF>;
+			assigned-clock-rates = <100000000>;
+			resets = <&cru SRST_PIPEPHY>;
+			reset-names = "phy";
+			rockchip,pipe-grf = <&peri_grf>;
+			rockchip,pipe-phy-grf = <&pipephy_grf>;
+			status = "disabled";
+		};
+
+		sfc: spi@ff860000 {
+			compatible = "rockchip,sfc";
+			reg = <0x0 0xff860000 0x0 0x10000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+			clock-names = "clk_sfc", "hclk_sfc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sdhci: mmc@ff870000 {
+			compatible = "rockchip,rk3562-dwcmshc", "rockchip,rk3588-dwcmshc";
+			reg = <0x0 0xff870000 0x0 0x10000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			assigned-clocks = <&cru BCLK_EMMC>, <&cru CCLK_EMMC>;
+			assigned-clock-rates = <200000000>, <200000000>;
+			clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
+				 <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+				 <&cru TMCLK_EMMC>;
+			clock-names = "core", "bus", "axi", "block", "timer";
+			resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
+				 <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
+				 <&cru SRST_T_EMMC>;
+			reset-names = "core", "bus", "axi", "block", "timer";
+			max-frequency = <200000000>;
+			status = "disabled";
+		};
+
+		sdmmc0: mmc@ff880000 {
+			compatible = "rockchip,rk3562-dw-mshc",
+				     "rockchip,rk3288-dw-mshc";
+			reg = <0x0 0xff880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru HCLK_SDMMC0>, <&cru CCLK_SDMMC0>,
+				 <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
+			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+			fifo-depth = <0x100>;
+			max-frequency = <200000000>;
+			resets = <&cru SRST_H_SDMMC0>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@ff890000 {
+			compatible = "rockchip,rk3562-dw-mshc",
+				     "rockchip,rk3288-dw-mshc";
+			reg = <0x0 0xff890000 0x0 0x10000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru HCLK_SDMMC1>, <&cru CCLK_SDMMC1>,
+				 <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
+			clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+			fifo-depth = <0x100>;
+			max-frequency = <200000000>;
+			resets = <&cru SRST_H_SDMMC1>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		dmac: dma-controller@ff990000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff990000 0x0 0x4000>;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+		};
+
+		i2c1: i2c@ffa00000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa00000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1m0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffa10000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa10000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2m0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffa20000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa20000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3m0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffa30000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa30000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4m0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@ffa40000 {
+			compatible = "rockchip,rk3562-i2c", "rockchip,rk3399-i2c";
+			reg = <0x0 0xffa40000 0x0 0x1000>;
+			clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+			clock-names = "i2c", "pclk";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5m0_xfer>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		saradc1: adc@ffaa0000 {
+			compatible = "rockchip,rk3562-saradc";
+			reg = <0x0 0xffaa0000 0x0 0x100>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_SARADC_VCCIO156>, <&cru PCLK_SARADC_VCCIO156>;
+			clock-names = "saradc", "apb_pclk";
+			resets = <&cru SRST_P_SARADC_VCCIO156>;
+			reset-names = "saradc-apb";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+	};
+};
+
+#include "rk3562-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
index 233eade30f21..645db9d3d297 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -469,7 +469,7 @@
 };
 
 &i2c1 {
-	/* Unknown/unused device at 0x3c */
+	/* Unused iSmartWare SW2001 encryption device at 0x3c */
 	status = "disabled";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2-manta.dts b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2-manta.dts
new file mode 100644
index 000000000000..97415d099d88
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2-manta.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-bigtreetech-cb2.dtsi"
+
+/ {
+	model = "BigTreeTech CB2";
+	compatible = "bigtreetech,cb2-manta", "bigtreetech,cb2", "rockchip,rk3566";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
new file mode 100644
index 000000000000..b6cf03a7ba66
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
@@ -0,0 +1,904 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3566.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	ext_cam_clk: clock-25000000-cam {
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		clock-output-names = "ext_cam_clk";
+		#clock-cells = <0>;
+	};
+
+	can_mcp2515_osc: clock-8000000-mcp2515 {
+		compatible = "fixed-clock";
+		clock-frequency = <8000000>;
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blue_led>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&heartbeat_led>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 50 100 150 200 255>;
+		pwms = <&pwm7 0 50000 0>;
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
+	};
+
+	vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_pcie: regulator-vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_drv>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host3";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_otg: regulator-vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_otg_en>;
+		regulator-name = "vcc5v0_otg3";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc5v0_usb2b: regulator-vcc5v0-usb2b {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb2b_en>;
+		regulator-name = "vcc5v0_usb2b";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb2t: regulator-vcc5v0-usb2t {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb2t_en>;
+		regulator-name = "vcc5v0_usb2t";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_sd: regulator-vcc-sd {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "vcc_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "input";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+			&gmac1m0_tx_bus2
+			&gmac1m0_rx_bus2
+			&gmac1m0_rgmii_clk
+			&gmac1m0_clkinout
+			&gmac1m0_rgmii_bus>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy0: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reset-delay-us = <20000>;
+		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <100000>;
+		reg = <0x0>;
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-initial-mode = <1>;
+		regulator-ramp-delay = <2300>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+		fcs,suspend-voltage-selector = <1>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default", "pmic-sleep",
+				"pmic-power-off", "pmic-reset";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		#sound-dai-cells = <0>;
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_npu";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_image";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vccio_acodec";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_image";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_3v3";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2m1_xfer>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	tft_tp: touchscreen@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		status = "okay";
+		ti,x-plate-ohms = <660>;
+		ti,rt-thr = <3000>;
+		ti,fuzzx = <32>;
+		ti,fuzzy = <16>;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
+
+	can_mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0x00>;
+		clocks = <&can_mcp2515_osc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcp2515_int_pin>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vcc3v3_sys>;
+		xceiver-supply = <&vcc3v3_sys>;
+	};
+};
+
+&spi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3m1_cs0 &spi3m1_pins>;
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable: bt-enable-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_host_wake: bt-host-wake-l {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake: bt-wake-l {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_drv: pcie-drv {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake: wifi-host-wake-l {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb2t_en: vcc5v0-usb2t-en {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb2b_en: vcc5v0-usb2b-en {
+			rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	work-led {
+		heartbeat_led: led-heartbeat {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		blue_led: led-blue {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mcp2515 {
+		mcp2515_int_pin: mcp2515-int-pin {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0m1_pins>;
+};
+
+&pwm12 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm12m1_pins>;
+};
+
+&pwm13 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm13m1_pins>;
+};
+
+&pwm14 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm14m1_pins>;
+};
+
+&pwm15 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm15m1_pins>;
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	/* WiFi & BT combo module AMPAK AP6256 */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	rockchip,default-sample-phase = <90>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+		brcm,drive-strength = <10>;
+	};
+};
+
+&sfc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart1 {
+	dma-names = "tx","rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca1v8_pmu>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5m1_xfer>;
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7m2_xfer>;
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb2t>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb2b>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dts b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dts
new file mode 100644
index 000000000000..7cd444caa18b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-pi2.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-bigtreetech-cb2.dtsi"
+
+/ {
+	model = "BigTreeTech Pi 2";
+	compatible = "bigtreetech,pi2", "rockchip,rk3566";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
index 7d4680933823..decc6deeef4e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -19,9 +19,9 @@
 
 	aliases {
 		ethernet0 = &gmac1;
-		mmc0 = &sdmmc0;
-		mmc1 = &sdmmc1;
-		mmc2 = &sdhci;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
 	};
 
 	chosen: chosen {
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
index 61dd71c259aa..ddf84c2a19cf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -512,7 +512,6 @@
 
 &sdmmc0 {
 	max-frequency = <150000000>;
-	supports-sd;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi
index d539570f531e..e2f0ccc6dbe7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi
@@ -435,6 +435,11 @@
 	};
 };
 
+&i2c2 {
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+};
+
 &i2s0_8ch {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index 2d3ae1544822..5c6f8cc401c9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -9,6 +9,8 @@
 #include "rk3566.dtsi"
 
 / {
+	chassis-type = "tablet";
+
 	aliases {
 		mmc0 = &sdhci;
 	};
@@ -53,7 +55,7 @@
 			label = "cover";
 			gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
-			linux,code = <SW_MACHINE_COVER>;
+			linux,code = <SW_LID>;
 			linux,can-disable;
 			wakeup-event-action = <EV_ACT_DEASSERTED>;
 			wakeup-source;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
index 26cf765a7297..08bf40de17ea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
@@ -282,11 +282,11 @@
 		reg = <0>;
 		backlight = <&backlight>;
 		enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
-		rotation = <90>;
 		power-supply = <&vcc_3v3>;
+		rotation = <90>;
 
-		port@0 {
-			panel_in_dsi: endpoint@0 {
+		port {
+			panel_in_dsi: endpoint {
 				remote-endpoint = <&dsi0_out_con>;
 			};
 		};
@@ -789,7 +789,7 @@
 	vccio1-supply = <&vccio_acodec>;
 	vccio2-supply = <&vcc_1v8>;
 	vccio3-supply = <&vccio_sd>;
-	vccio4-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcca1v8_pmu>;
 	vccio5-supply = <&vcc_1v8>;
 	vccio6-supply = <&vcc1v8_dvp>;
 	vccio7-supply = <&vcc_3v3>;
@@ -867,6 +867,7 @@
 		spi-max-frequency = <100000000>;
 		spi-rx-bus-width = <2>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 98e75df8b158..a9021c524afb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -30,6 +30,7 @@
 
 	fan: gpio_fan {
 		compatible = "gpio-fan";
+		fan-supply = <&vcc12v_dcin>;
 		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map =
 				<   0 0>,
@@ -265,8 +266,12 @@
 };
 
 &gmac1 {
-	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
-	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>,
+			  <&cru SCLK_GMAC1_RGMII_SPEED>,
+			  <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>,
+				 <&cru SCLK_GMAC1>,
+				 <&gmac1_clkin>;
 	clock_in_out = "input";
 	phy-supply = <&vcc_3v3>;
 	phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
index 24928a129446..f8cf03380636 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -173,8 +173,12 @@
 };
 
 &gmac1 {
-	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
-	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>,
+			  <&cru SCLK_GMAC1_RGMII_SPEED>,
+			  <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>,
+				 <&cru SCLK_GMAC1>,
+				 <&gmac1_clkin>;
 	clock_in_out = "input";
 	phy-mode = "rgmii";
 	phy-supply = <&vcc_3v3>;
@@ -644,6 +648,7 @@
 		spi-max-frequency = <24000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
index 53e71528e4c4..80ac40555e02 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
@@ -466,6 +466,7 @@
 		compatible = "belling,bl24c16a", "atmel,24c16";
 		reg = <0x50>;
 		pagesize = <16>;
+		vcc-supply = <&vcca1v8_pmu>;
 	};
 };
 
@@ -636,6 +637,7 @@
 		spi-max-frequency = <104000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dts b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dts
new file mode 100644
index 000000000000..9f3cdaad1c9a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Michael Opdenacker <michael.opdenacker@rootcommit.com>
+ */
+
+/dts-v1/;
+
+#include "rk3566-tinker-board-3.dtsi"
+
+/ {
+	model = "Asus Tinker Board 3";
+	compatible = "asus,rk3566-tinker-board-3", "rockchip,rk3566";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dtsi
new file mode 100644
index 000000000000..d9cb73e71d56
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dtsi
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Michael Opdenacker <michael.opdenacker@rootcommit.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		mmc1 = &sdmmc0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		act-led {
+			gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger="mmc1";
+		};
+
+		rsv-led {
+			gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger="none";
+		};
+	};
+
+	vcc3v3_sys: regulator-3v3-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: regulator-5v0-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb_host: regulator-5v0-vcc-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&u2_a_vbus_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-names = "mclk";
+		clock-output-names = "rk809-clkout1", "rk809-clkout2";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		#sound-dai-cells = <0>;
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <830000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eeprom_wc_n>;
+	};
+
+	rtc_isl1208: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+		interrupt-names = "irq";
+		interrupts-extended = <&gpio0 RK_PD3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtcic_int_l>;
+	};
+};
+
+&pinctrl {
+	eeprom {
+		eeprom_wc_n: eeprom-wc-n {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rtc {
+		rtcic_int_l: rtcic-int-l {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		u2_a_vbus_en: u2-a-vbus-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		u3_a_vbus_en: u3-a-vbus-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3s.dts b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3s.dts
new file mode 100644
index 000000000000..3624ebc8a26f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3s.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Michael Opdenacker <michael.opdenacker@rootcommit.com>
+ */
+
+/dts-v1/;
+
+#include "rk3566-tinker-board-3.dtsi"
+
+/ {
+	model = "Asus Tinker Board 3S";
+	compatible = "asus,rk3566-tinker-board-3s", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts b/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
new file mode 100644
index 000000000000..4db00489be40
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts
@@ -0,0 +1,880 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "9Tripod X3568 v4";
+	compatible = "9tripod,x3568-v4", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc2;
+		rtc0 = &rtc0;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-vol-up {
+			label = "volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <50000>;
+		};
+
+		button-vol-down {
+			label = "volume down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <500000>;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_work: led-0 {
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_en>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	pdm_codec: pdm-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		#sound-dai-cells = <0>;
+	};
+
+	pdm_sound: pdm-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "microphone";
+
+		simple-audio-card,cpu {
+			sound-dai = <&pdm>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&pdm_codec>;
+		};
+	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <300>;
+		reset-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+	};
+
+	dc_12v: regulator-dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	pcie30_avdd0v9: regulator-pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: regulator-pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_pcie: regulator-vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: regulator-vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+};
+
+&can1 {
+	assigned-clocks = <&cru CLK_CAN1>;
+	assigned-clock-rates = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1m1_pins>;
+	status = "okay";
+};
+
+/* used for usb_host0_xhci */
+&combphy0 {
+	status = "okay";
+};
+
+/* used for usb_host1_xhci */
+&combphy1 {
+	status = "okay";
+};
+
+/* connected to sata2 */
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	rtc0: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+/* used for AP6275S Bluetooth Sound */
+&i2s3_2ch {
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			/* Note: The LED polarity is inverted */
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			/* Note: The LED polarity is inverted */
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pin>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pdm {
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		led_work_en: led_work_en {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_reset_pin: pcie-reset-pin {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* Required remotectl for IR receiver */
+&pwm7 {
+	status = "disabled";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+/* used for eMMC */
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+/* used for microSD (TF) Slot */
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+/* used for AP6275S WiFi */
+&sdmmc2 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+/* used for Debug */
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-0 = <&uart3m1_xfer>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-0 = <&uart4m1_xfer>;
+	status = "okay";
+};
+
+/* used for WiFi/BT AP6275S */
+&uart8 {
+	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
+	status = "okay";
+};
+
+&uart9 {
+	pinctrl-0 = <&uart9m1_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts b/arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts
new file mode 100644
index 000000000000..12225b631eb6
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "LinkEase EasePi R1";
+	compatible = "linkease,easepi-r1", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&status_led_pin>;
+
+		status_led: led-status {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	dc_12v: regulator-dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	pcie30_avdd0v9: regulator-pcie30-avdd0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: regulator-pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	regulator-vdd0v95-25glan {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd0v95_25glan_en>;
+		regulator-name = "vdd0v95_25glan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_nvme: regulator-vcc3v3-nvme {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_nvme_en>;
+		regulator-name = "vcc3v3_nvme";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-names = "default";
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-0 = <&eth_phy1_reset_pin>;
+		pinctrl-names = "default";
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* ETH3 */
+&pcie2x1 {
+	reset-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+/* ETH2 */
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+/* M.2 Key for 2280 NVMe */
+&pcie3x2 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_nvme>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac0 {
+		eth_phy0_reset_pin: eth-phy0-reset-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gmac1 {
+		eth_phy1_reset_pin: eth-phy1-reset-pin {
+			rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		status_led_pin: status-led-pin {
+			rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	nvme {
+		vcc3v3_nvme_en: vcc3v3-nvme-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie-nic {
+		vdd0v95_25glan_en: vdd0v95-25glan-en {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+/* OTG Only USB2.0, Only device mode */
+&usb_host0_xhci {
+	dr_mode = "peripheral";
+	extcon = <&usb2phy0>;
+	maximum-speed = "high-speed";
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_sys>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index b073a4d03e4f..b01f952b640e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -22,6 +22,15 @@
 		mmc1 = &sdhci;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <20 220>;
+		default-brightness-level = <100>;
+		num-interpolated-steps = <200>;
+		power-supply = <&vcc3v3_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
 	chosen: chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -184,6 +193,47 @@
 	cpu-supply = <&vdd_cpu>;
 };
 
+&dsi0 {
+	clock-master;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "wanchanglong,w552793baa", "raydium,rm67200";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc3v3_lcd0_n>;
+		reset-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc3v3_lcd0_n>;
+		vsn-supply = <&vcc5v0_sys>;
+		vsp-supply = <&vcc5v0_sys>;
+
+		port {
+			panel_in_dsi: endpoint {
+				remote-endpoint = <&dsi0_out_panel>;
+			};
+		};
+	};
+
+};
+
+&dsi0_in {
+	dsi0_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_dsi0>;
+	};
+};
+
+&dsi0_out {
+	dsi0_out_panel: endpoint {
+		remote-endpoint = <&panel_in_dsi>;
+	};
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
 &gmac0 {
 	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
 	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
@@ -581,6 +631,10 @@
 	status = "okay";
 };
 
+&pwm4 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcca_1v8>;
 	status = "okay";
@@ -672,8 +726,9 @@
 };
 
 &vop {
-	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru PLL_VPLL>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&xin24m>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <0>, <132000000>, <132000000>;
 	status = "okay";
 };
 
@@ -687,3 +742,10 @@
 		remote-endpoint = <&hdmi_in_vp0>;
 	};
 };
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h66k.dts b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h66k.dts
new file mode 100644
index 000000000000..bc51123d53f5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h66k.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3568-hinlink-opc.dtsi"
+
+/ {
+	model = "HINLINK H66K";
+	compatible = "hinlink,h66k", "rockchip,rk3568";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h68k.dts b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h68k.dts
new file mode 100644
index 000000000000..793ee651b868
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h68k.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3568-hinlink-opc.dtsi"
+
+/ {
+	model = "HINLINK H68K";
+	compatible = "hinlink,h68k", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus
+		     &gmac0_rstn>;
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus
+		     &gmac1_rstn>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	gmac {
+		gmac0_rstn: gmac0-rstn {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		gmac1_rstn: gmac1-rstn {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-hinlink-opc.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-opc.dtsi
new file mode 100644
index 000000000000..14f3839ca091
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-opc.dtsi
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_ir_m0>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&factory>;
+
+		button-factory {
+			label = "factory";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&green_led>, <&red_led>, <&work_led>;
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vcc0v9_2g5: regulator-0v9-vcc-2g5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v9_2g5";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc12v_dcinp: regulator-12v-vcc-dcinp {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcinp";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_pi6c_05: regulator-3v3-vcc-pi6c-05 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan_power_en>;
+		regulator-name = "vcc3v3_pi6c_05";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sd: regulator-3v3-vcc-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_pwren>;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: regulator-3v3-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: regulator-5v0-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcinp>;
+	};
+
+	vcc5v0_usb30_otg0: regulator-5v0-vcc-usb30-otg0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_power_en>;
+		regulator-name = "vcc5v0_usb30_otg0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3: SWITCH_REG2 {
+				regulator-name = "vcc3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wifi_perstn>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&lan_resetb>;
+	reset-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&lan_reseta>;
+	reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pinctrl {
+	keys {
+		factory: factory {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		green_led: green-led {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		red_led: red-led {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led: work-led {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir {
+		pwm3_ir_m0: pwm3-ir-m0 {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mmc {
+		sd_pwren: sd-pwren {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		lan_power_en: lan-power-en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lan_reseta: lan-reseta {
+			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lan_resetb: lan-resetb {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_perstn: wifi-perstn {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_power_en: usb-power-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+/* Via Type-C adapter */
+&sata0 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30_otg0>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb30_otg0>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb30_otg0>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts b/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
index c491dc4d4947..b1f185a58902 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
@@ -206,12 +206,6 @@
 	};
 };
 
-&i2c2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2m0_xfer>;
-};
-
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3m0_xfer>;
@@ -357,6 +351,19 @@
 	status = "okay";
 };
 
+&spi0 {
+	/* use hardware chipselect on cs0 (cs1 unconnected) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0m0_pins>, <&spi0m0_cs0>;
+	status = "okay";
+
+	fram@0 {
+		compatible = "fujitsu,mb85rs128ty";
+		reg = <0>;
+		spi-max-frequency = <33000000>;
+	};
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
index b6ad8328c7eb..718d1a2da8e5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -17,36 +17,56 @@
 		ethernet0 = &gmac0;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio4_a0_k1_pin>;
+		pinctrl-names = "default";
+
+		button-reset {
+			debounce-interval = <50>;
+			gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "RESET";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
+		pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
 
 		led-lan1 {
 			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
 			function = LED_FUNCTION_LAN;
 			function-enumerator = <1>;
 			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+			label = "LAN-1";
 		};
 
 		led-lan2 {
 			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
 			function = LED_FUNCTION_LAN;
 			function-enumerator = <2>;
 			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
+			label = "LAN-2";
 		};
 
-		power_led: led-power {
+		power_led: led-sys {
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_POWER;
-			linux,default-trigger = "heartbeat";
 			gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+			label = "SYS";
+			linux,default-trigger = "heartbeat";
 		};
 
 		led-wan {
 			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
 			function = LED_FUNCTION_WAN;
 			gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+			label = "WAN";
 		};
 	};
 };
@@ -58,6 +78,7 @@
 	clock_in_out = "output";
 	phy-handle = <&rgmii_phy0>;
 	phy-mode = "rgmii";
+	phy-supply = <&vcc_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_miim
 		     &gmac0_tx_bus2
@@ -116,6 +137,12 @@
 		};
 	};
 
+	gpio-keys {
+		gpio4_a0_k1_pin: gpio4-a0-k1-pin {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	gpio-leds {
 		lan1_led_pin: lan1-led-pin {
 			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -125,7 +152,7 @@
 			rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		power_led_pin: power-led-pin {
+		sys_led_pin: sys-led-pin {
 			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
index 00c479aa1871..e3f44ea4eabe 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
@@ -18,12 +18,27 @@
 	aliases {
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
+		rtc0 = &hym8563;
 	};
 
 	chosen: chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "MASKROM";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
 	hdmi-con {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -486,9 +501,12 @@
 &sdhci {
 	bus-width = <8>;
 	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
 	non-removable;
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
index 0f844806ec54..442a2bc43ba8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
@@ -482,6 +482,8 @@
 };
 
 &i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
 	rockchip,trcm-sync-tx-only;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts b/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts
new file mode 100644
index 000000000000..58c1052ba8ef
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Ariaboard Photonicat";
+	compatible = "ariaboard,photonicat", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <6800000>;
+		energy-full-design-microwatt-hours = <25000000>;
+		voltage-max-design-microvolt = <4200000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 =  <4100000 100>, <4040000 90>,
+					<3980000 80>, <3920000 70>,
+					<3870000 60>, <3820000 50>,
+					<3790000 40>, <3770000 30>,
+					<3740000 20>, <3680000 10>,
+					<3450000 0>;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi_con: hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* actually fed by vcc_syson, dependent
+	 * on pi6c clock generator
+	 */
+	vcc3v3_pcie: regulator-vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_pi6c>;
+	};
+
+	/* pi6c pcie clock generator */
+	vcc3v3_pi6c: regulator-vcc3v3-pi6c {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwren_h>;
+		regulator-name = "vcc3v3_pi6c";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_syson>;
+	};
+
+	vcc3v3_sd: regulator-vcc3v3-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwren>;
+		regulator-boot-on;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_syson>;
+	};
+
+	vcc3v4_rf: regulator-vcc3v4-rf {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rf_pwr_en>;
+		regulator-name = "vcc3v4_rf";
+		regulator-min-microvolt = <3400000>;
+		regulator-max-microvolt = <3400000>;
+		vin-supply = <&vccin_5v>;
+	};
+
+	vcc5v0_usb30_otg0: regulator-vcc5v0-usb30-otg0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren_h>;
+		regulator-name = "vcc5v0_usb30_otg0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vccin_5v>;
+	};
+
+	vccin_5v: regulator-vccin-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vccin_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_sysin: regulator-vcc-sysin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sysin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vccin_5v>;
+	};
+
+	vcc_syson: regulator-vcc-syson {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_syson";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vcca_1v8: regulator-vcca-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdda_0v9: regulator-vdda-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdd_gpu: regulator-vdd-gpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 1>;
+		pwm-supply = <&vcc_syson>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <6001>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		pwm-supply = <&vcc_syson>;
+		regulator-name = "vdd_logic";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <6001>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	rfkill-modem {
+		compatible = "rfkill-gpio";
+		label = "M.2 USB Modem";
+		radio-type = "wwan";
+		shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&pmucru CLK_RTC_32K>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h &clk32k_out1>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+/* Motorcomm YT8521SC LAN port (require SGMII) */
+&gmac0 {
+	status = "disabled";
+};
+
+/* Motorcomm YT8521SC WAN port */
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_syson>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x3>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_LOW>;
+		rx-internal-delay-ps = <1500>;
+		tx-internal-delay-ps = <1500>;
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+/* M.2 E-Key for PCIe WLAN */
+&pcie3x2 {
+	max-link-speed = <1>;
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x1m0_pins>;
+	reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwren_h: pcie-pwren-h {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc0 {
+		sdmmc0_pwren: sdmmc0-pwren {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		rf_pwr_en: rf-pwr-en {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_host_pwren_h: usb-host-pwren-h {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3>;
+	pmuio2-supply = <&vcc_3v3>;
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+/* eMMC */
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+/* Micro SD card slot */
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+/* Qualcomm Atheros QCA9377 WiFi */
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+/* Qualcomm Atheros QCA9377 Bluetooth */
+&uart1 {
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca9377-bt";
+		clocks = <&pmucru CLK_RTC_32K>;
+		enable-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+/* Debug UART */
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	dma-names = "tx", "rx";
+	status = "okay";
+};
+
+/* Onboard power management MCU */
+&uart4 {
+	dma-names = "tx", "rx";
+	status = "okay";
+};
+
+/* M.2 E-Key for USB Bluetooth */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* USB Type-A Port */
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* M.2 B-Key for USB Modem WWAN */
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc3v4_rf>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb30_otg0>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb30_otg0>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&xin32k {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk32k_out1>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts
new file mode 100644
index 000000000000..f16d1c628793
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2024 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+
+#include "rk3568-qnap-tsx33.dtsi"
+
+/ {
+	model = "Qnap TS-233-2G NAS System 2-Bay";
+	compatible = "qnap,ts233", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+	};
+};
+
+/* connected to sata2 */
+&combphy2 {
+	status = "okay";
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	status = "okay";
+};
+
+&i2c1 {
+	/* eeprom for vital-product-data on the backplane */
+	eeprom@56 {
+		compatible = "giantec,gt24c04a", "atmel,24c04";
+		reg = <0x56>;
+		label = "VPD_BP";
+		num-addresses = <2>;
+		pagesize = <16>;
+		read-only;
+	};
+};
+
+&leds {
+	led-1 {
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_DISK;
+		gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+		label = "hdd2:green:disk";
+		linux,default-trigger = "disk-activity";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdd2_led_pin>;
+	};
+};
+
+&mcu {
+	compatible = "qnap,ts233-mcu";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@3 {
+		/* Motorcomm YT8521 phy */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x3>;
+		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-names = "default";
+		reset-assert-us = <10000>;
+		reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	gmac0 {
+		eth_phy0_reset_pin: eth-phy0-reset-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		hdd2_led_pin: hdd2-led-pin {
+			rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+/* connected to usb_host1_ehci/ohci */
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+/* connected to usb_host0_ehci/ohci */
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+/* right port backside */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* left port backside */
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index e601d9271ba8..d1e3b7e7a280 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -6,10 +6,7 @@
 
 /dts-v1/;
 
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "rk3568.dtsi"
+#include "rk3568-qnap-tsx33.dtsi"
 
 / {
 	model = "Qnap TS-433-4G NAS System 4-Bay";
@@ -17,79 +14,6 @@
 
 	aliases {
 		ethernet0 = &gmac0;
-		mmc0 = &sdhci;
-		rtc0 = &rtc_rv8263;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&copy_button_pin>, <&reset_button_pin>;
-		pinctrl-names = "default";
-
-		key-copy {
-			label = "copy";
-			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_COPY>;
-		};
-
-		key-reset {
-			label = "reset";
-			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_DISK;
-			gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "disk-activity";
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdd1_led_pin>;
-		};
-
-		led-1 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_DISK;
-			gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "disk-activity";
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdd2_led_pin>;
-		};
-
-		led-2 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_DISK;
-			gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "disk-activity";
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdd3_led_pin>;
-		};
-
-		led-3 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_DISK;
-			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "disk-activity";
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdd4_led_pin>;
-		};
-	};
-
-	dc_12v: regulator-dc-12v {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
 	};
 
 	vcc3v3_pcie: regulator-vcc3v3-pcie {
@@ -101,74 +25,6 @@
 		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&dc_12v>;
 	};
-
-	vcc3v3_sys: regulator-vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vcc5v0_host: regulator-vcc5v0-host {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_usb>;
-	};
-
-	vcc5v0_otg: regulator-vcc5v0-otg {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_otg_en>;
-		regulator-name = "vcc5v0_otg";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc5v0_usb>;
-	};
-
-	vcc5v0_sys: regulator-vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vcc5v0_usb: regulator-vcc5v0-usb {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-};
-
-/* connected to usb_host0_xhci */
-&combphy0 {
-	status = "okay";
-};
-
-/* connected to sata1 */
-&combphy1 {
-	status = "okay";
 };
 
 /* connected to sata2 */
@@ -176,22 +32,6 @@
 	status = "okay";
 };
 
-&cpu0 {
-	cpu-supply = <&vdd_cpu>;
-};
-
-&cpu1 {
-	cpu-supply = <&vdd_cpu>;
-};
-
-&cpu2 {
-	cpu-supply = <&vdd_cpu>;
-};
-
-&cpu3 {
-	cpu-supply = <&vdd_cpu>;
-};
-
 &gmac0 {
 	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
 	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
@@ -208,263 +48,7 @@
 	status = "okay";
 };
 
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	pmic@20 {
-		compatible = "rockchip,rk809";
-		reg = <0x20>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		system-power-controller;
-		vcc1-supply = <&vcc3v3_sys>;
-		vcc2-supply = <&vcc3v3_sys>;
-		vcc3-supply = <&vcc3v3_sys>;
-		vcc4-supply = <&vcc3v3_sys>;
-		vcc5-supply = <&vcc3v3_sys>;
-		vcc6-supply = <&vcc3v3_sys>;
-		vcc7-supply = <&vcc3v3_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc3v3_sys>;
-		wakeup-source;
-
-		regulators {
-			vdd_logic: DCDC_REG1 {
-				regulator-name = "vdd_logic";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-initial-mode = <0x2>;
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_gpu: DCDC_REG2 {
-				regulator-name = "vdd_gpu";
-				regulator-always-on;
-				regulator-initial-mode = <0x2>;
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-initial-mode = <0x2>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vdd_npu: DCDC_REG4 {
-				regulator-name = "vdd_npu";
-				regulator-initial-mode = <0x2>;
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG5 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdda0v9_image: LDO_REG1 {
-				regulator-name = "vdda0v9_image";
-				regulator-always-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdda_0v9: LDO_REG2 {
-				regulator-name = "vdda_0v9";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdda0v9_pmu: LDO_REG3 {
-				regulator-name = "vdda0v9_pmu";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <900000>;
-				};
-			};
-
-			vccio_acodec: LDO_REG4 {
-				regulator-name = "vccio_acodec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_pmu: LDO_REG6 {
-				regulator-name = "vcc3v3_pmu";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcca_1v8: LDO_REG7 {
-				regulator-name = "vcca_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcca1v8_pmu: LDO_REG8 {
-				regulator-name = "vcca1v8_pmu";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcca1v8_image: LDO_REG9 {
-				regulator-name = "vcca1v8_image";
-				regulator-always-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v3: SWITCH_REG1 {
-				regulator-name = "vcc_3v3";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_sd: SWITCH_REG2 {
-				regulator-name = "vcc3v3_sd";
-				/*
-				 * turning this off, breaks access to both
-				 * PCIe controllers, refclk generator perhaps
-				 */
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1390000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
 &i2c1 {
-	status = "okay";
-
-	rtc_rv8263: rtc@51 {
-		compatible = "microcrystal,rv8263";
-		reg = <0x51>;
-		wakeup-source;
-	};
-
-	/* eeprom for vital-product-data on the mainboard */
-	eeprom@54 {
-		compatible = "giantec,gt24c04a", "atmel,24c04";
-		reg = <0x54>;
-		label = "VPD_MB";
-		num-addresses = <2>;
-		pagesize = <16>;
-		read-only;
-	};
-
 	/* eeprom for vital-product-data on the backplane */
 	eeprom@56 {
 		compatible = "giantec,gt24c04a", "atmel,24c04";
@@ -476,10 +60,51 @@
 	};
 };
 
+&leds {
+	led-1 {
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_DISK;
+		gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+		label = "hdd2:green:disk";
+		linux,default-trigger = "disk-activity";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdd2_led_pin>;
+	};
+
+	led-2 {
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_DISK;
+		gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
+		label = "hdd3:green:disk";
+		linux,default-trigger = "disk-activity";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdd3_led_pin>;
+	};
+
+	led-3 {
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_DISK;
+		gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+		label = "hdd4:green:disk";
+		linux,default-trigger = "disk-activity";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdd4_led_pin>;
+	};
+};
+
+&mcu {
+	compatible = "qnap,ts433-mcu";
+};
+
 &mdio0 {
-	rgmii_phy0: ethernet-phy@0 {
+	rgmii_phy0: ethernet-phy@3 {
+		/* Motorcomm YT8521 phy */
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0>;
+		reg = <0x3>;
+		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-names = "default";
+		reset-assert-us = <10000>;
+		reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -504,21 +129,13 @@
 };
 
 &pinctrl {
-	keys {
-		copy_button_pin: copy-button-pin {
-			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		reset_button_pin: reset-button-pin {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+	gmac0 {
+		eth_phy0_reset_pin: eth-phy0-reset-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	leds {
-		hdd1_led_pin: hdd1-led-pin {
-			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
 		hdd2_led_pin: hdd2-led-pin {
 			rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
@@ -531,79 +148,12 @@
 			rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		vcc5v0_otg_en: vcc5v0-otg-en {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pmu_io_domains {
-	vccio4-supply = <&vcc_1v8>;
-	vccio6-supply = <&vcc_1v8>;
-	status = "okay";
-};
-
-&sata1 {
-	status = "okay";
 };
 
 &sata2 {
 	status = "okay";
 };
 
-&sdhci {
-	bus-width = <8>;
-	max-frequency = <200000000>;
-	non-removable;
-	status = "okay";
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <1>;
-	rockchip,hw-tshut-polarity = <0>;
-	status = "okay";
-};
-
-/*
- * Connected to an MCU, that provides access to more LEDs,
- * buzzer, fan control and more.
- */
-&uart0 {
-	status = "okay";
-};
-
-/*
- * Pins available on CN3 connector at TTL voltage level (3V3).
- * ,_  _.
- * |1234|  1=TX 2=VCC
- * `----'  3=RX 4=GND
- */
-&uart2 {
-	status = "okay";
-};
-
-&usb2phy0 {
-	status = "okay";
-};
-
-/* connected to usb_host0_xhci */
-&usb2phy0_otg {
-	phy-supply = <&vcc5v0_otg>;
-	status = "okay";
-};
-
 &usb2phy1 {
 	status = "okay";
 };
@@ -629,12 +179,6 @@
 	status = "okay";
 };
 
-/* front port */
-&usb_host0_xhci {
-	dr_mode = "host";
-	status = "okay";
-};
-
 /* left port backside */
 &usb_host1_ehci {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi
new file mode 100644
index 000000000000..f009275c72c8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi
@@ -0,0 +1,608 @@
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3568.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+		rtc0 = &rtc_rv8263;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&copy_button_pin>, <&reset_button_pin>;
+		pinctrl-names = "default";
+
+		key-copy {
+			label = "copy";
+			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_COPY>;
+		};
+
+		key-reset {
+			label = "reset";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+			label = "hdd1:green:disk";
+			linux,default-trigger = "disk-activity";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdd1_led_pin>;
+		};
+	};
+
+	dc_12v: regulator-dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_otg: regulator-vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_otg_en>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+};
+
+/* connected to usb_host0_xhci */
+&combphy0 {
+	status = "okay";
+};
+
+/* connected to sata1 */
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+/*
+ * The MCU can provide system temperature too, but only by polling and of
+ * course also cannot set trip points. So attach to the cpu thermal-zone
+ * instead to control the fan.
+ */
+&cpu_thermal {
+	trips {
+		case_fan0: case-fan0 {
+			hysteresis = <2000>;
+			temperature = <35000>;
+			type = "active";
+		};
+
+		case_fan1: case-fan1 {
+			hysteresis = <2000>;
+			temperature = <45000>;
+			type = "active";
+		};
+
+		case_fan2: case-fan2 {
+			hysteresis = <2000>;
+			temperature = <65000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		/*
+		 * Always provide some air movement, due to small case
+		 * full of harddrives.
+		 */
+		map1 {
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+			trip = <&case_fan0>;
+		};
+
+		map2 {
+			cooling-device = <&fan 2 3>;
+			trip = <&case_fan1>;
+		};
+
+		map3 {
+			cooling-device = <&fan 4 THERMAL_NO_LIMIT>;
+			trip = <&case_fan2>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				/*
+				 * turning this off, breaks access to both
+				 * PCIe controllers, refclk generator perhaps
+				 */
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	rtc_rv8263: rtc@51 {
+		compatible = "microcrystal,rv8263";
+		reg = <0x51>;
+		wakeup-source;
+	};
+
+	/* eeprom for vital-product-data on the mainboard */
+	eeprom@54 {
+		compatible = "giantec,gt24c04a", "atmel,24c04";
+		reg = <0x54>;
+		label = "VPD_MB";
+		num-addresses = <2>;
+		pagesize = <16>;
+		read-only;
+	};
+};
+
+&pinctrl {
+	keys {
+		copy_button_pin: copy-button-pin {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		hdd1_led_pin: hdd1-led-pin {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	vccio4-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+/*
+ * Connected to an MCU, that provides access to more LEDs,
+ * buzzer, fan control and more.
+ */
+&uart0 {
+	status = "okay";
+
+	mcu: mcu {
+		fan: fan-0 {
+			#cooling-cells = <2>;
+			cooling-levels = <0 64 89 128 166 204 221 238>;
+		};
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			serial-number@0 {
+				reg = <0x0 0x13>;
+			};
+
+			ext-port@22 {
+				reg = <0x22 0x2>;
+			};
+
+			mac0: mac@24 {
+				compatible = "mac-base";
+				reg = <0x24 0x11>;
+				#nvmem-cell-cells = <1>;
+			};
+
+			mac1: mac@35 {
+				compatible = "mac-base";
+				reg = <0x35 0x11>;
+				#nvmem-cell-cells = <1>;
+			};
+
+			mac2: mac@46 {
+				compatible = "mac-base";
+				reg = <0x46 0x11>;
+				#nvmem-cell-cells = <1>;
+			};
+
+			mac3: mac@57 {
+				compatible = "mac-base";
+				reg = <0x57 0x11>;
+				#nvmem-cell-cells = <1>;
+			};
+
+			mac4: mac@68 {
+				compatible = "mac-base";
+				reg = <0x68 0x11>;
+				#nvmem-cell-cells = <1>;
+			};
+
+			mac5: mac@79 {
+				compatible = "mac-base";
+				reg = <0x79 0x11>;
+				#nvmem-cell-cells = <1>;
+			};
+
+			mac6: mac@8a {
+				compatible = "mac-base";
+				reg = <0x8a 0x11>;
+				#nvmem-cell-cells = <1>;
+			};
+
+			mac7: mac@9b {
+				compatible = "mac-base";
+				reg = <0x9b 0x11>;
+				#nvmem-cell-cells = <1>;
+			};
+		};
+	};
+};
+
+/*
+ * Pins available on CN3 connector at TTL voltage level (3V3).
+ * ,_  _.
+ * |1234|  1=TX 2=VCC
+ * `----'  3=RX 4=GND
+ */
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+/* connected to usb_host0_xhci */
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+/* front port */
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index ac79140a9ecd..44cfdfeed668 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -778,20 +778,6 @@
 	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 	uart-has-rtscts;
 	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rk809 1>;
-		clock-names = "lpo";
-		device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
-		vbat-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_1v8>;
-		/* vddio comes from regulator on module, use IO bank voltage instead */
-	};
 };
 
 &uart2 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts
index e8243c908542..bb33fabae16e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5.dts
@@ -53,7 +53,7 @@
 
 	pdm_codec: pdm-codec {
 		compatible = "dmic-codec";
-		num-channels = <1>;
+		num-channels = <2>;
 		#sound-dai-cells = <0>;
 	};
 
@@ -167,6 +167,10 @@
 	};
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -414,6 +418,10 @@
 	pinctrl-0 = <&i2c4m1_xfer>;
 };
 
+&i2s0_8ch {
+	status = "okay";
+};
+
 &pdm {
 	pinctrl-0 = <&pdmm0_clk
 		     &pdmm0_sdi0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index ecaefe208e3e..e719a3df126c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -152,7 +152,7 @@
 		compatible = "rockchip,rk3568-pcie";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		bus-range = <0x0 0xf>;
+		bus-range = <0x10 0x1f>;
 		clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
 			 <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
 			 <&cru CLK_PCIE30X1_AUX_NDFT>;
@@ -175,7 +175,7 @@
 		num-ib-windows = <6>;
 		num-ob-windows = <2>;
 		max-link-speed = <3>;
-		msi-map = <0x0 &gic 0x1000 0x1000>;
+		msi-map = <0x1000 &its 0x1000 0x1000>;
 		num-lanes = <1>;
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
@@ -205,7 +205,7 @@
 		compatible = "rockchip,rk3568-pcie";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		bus-range = <0x0 0xf>;
+		bus-range = <0x20 0x2f>;
 		clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
 			 <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
 			 <&cru CLK_PCIE30X2_AUX_NDFT>;
@@ -228,7 +228,7 @@
 		num-ib-windows = <6>;
 		num-ob-windows = <2>;
 		max-link-speed = <3>;
-		msi-map = <0x0 &gic 0x2000 0x1000>;
+		msi-map = <0x2000 &its 0x2000 0x1000>;
 		num-lanes = <2>;
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
@@ -350,6 +350,7 @@
 		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_PIPEPHY0>;
+		reset-names = "phy";
 		rockchip,pipe-grf = <&pipegrf>;
 		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
 		#phy-cells = <1>;
diff --git a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
index 62be06f3b863..8893b7b6cc9f 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
@@ -53,7 +53,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
-			clocks = <&scmi_clk 0>;
+			clocks = <&scmi_clk SCMI_CLK_CPU>;
 			#cooling-cells = <2>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -69,6 +69,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
+			clocks = <&scmi_clk SCMI_CLK_CPU>;
 			#cooling-cells = <2>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -84,6 +85,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
+			clocks = <&scmi_clk SCMI_CLK_CPU>;
 			#cooling-cells = <2>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -99,6 +101,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
+			clocks = <&scmi_clk SCMI_CLK_CPU>;
 			#cooling-cells = <2>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -174,6 +177,18 @@
 		method = "smc";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scmi_shmem: shmem@10f000 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x0010f000 0x0 0x100>;
+			no-map;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -199,19 +214,6 @@
 		#clock-cells = <0>;
 	};
 
-	sram@10f000 {
-		compatible = "mmio-sram";
-		reg = <0x0 0x0010f000 0x0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x0 0x0010f000 0x100>;
-
-		scmi_shmem: sram@0 {
-			compatible = "arm,scmi-shmem";
-			reg = <0x0 0x100>;
-		};
-	};
-
 	sata1: sata@fc400000 {
 		compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
 		reg = <0 0xfc400000 0 0x1000>;
@@ -284,6 +286,18 @@
 		mbi-alias = <0x0 0xfd410000>;
 		mbi-ranges = <296 24>;
 		msi-controller;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-noncoherent;
+
+		its: msi-controller@fd440000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0xfd440000 0 0x20000>;
+			dma-noncoherent;
+			msi-controller;
+			#msi-cells = <1>;
+		};
 	};
 
 	usb_host0_ehci: usb@fd800000 {
@@ -546,7 +560,7 @@
 			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "job", "mmu", "gpu";
-		clocks = <&scmi_clk 1>, <&cru CLK_GPU>;
+		clocks = <&scmi_clk SCMI_CLK_GPU>, <&cru CLK_GPU>;
 		clock-names = "gpu", "bus";
 		#cooling-cells = <2>;
 		power-domains = <&power RK3568_PD_GPU>;
@@ -605,6 +619,50 @@
 		#iommu-cells = <0>;
 	};
 
+	vicap: video-capture@fdfe0000 {
+		compatible = "rockchip,rk3568-vicap";
+		reg = <0x0 0xfdfe0000 0x0 0x200>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru DCLK_VICAP>;
+		assigned-clock-rates = <300000000>;
+		clocks = <&cru ACLK_VICAP>, <&cru HCLK_VICAP>,
+			 <&cru DCLK_VICAP>, <&cru ICLK_VICAP_G>;
+		clock-names = "aclk", "hclk", "dclk", "iclk";
+		iommus = <&vicap_mmu>;
+		power-domains = <&power RK3568_PD_VI>;
+		resets = <&cru SRST_A_VICAP>, <&cru SRST_H_VICAP>,
+			 <&cru SRST_D_VICAP>, <&cru SRST_P_VICAP>,
+			 <&cru SRST_I_VICAP>;
+		reset-names = "arst", "hrst", "drst", "prst", "irst";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vicap_dvp: port@0 {
+				reg = <0>;
+			};
+
+			vicap_mipi: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	vicap_mmu: iommu@fdfe0800 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdfe0800 0x0 0x100>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VICAP>, <&cru HCLK_VICAP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3568_PD_VI>;
+		rockchip,disable-mmu-reset;
+		status = "disabled";
+	};
+
 	sdmmc2: mmc@fe000000 {
 		compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe000000 0x0 0x4000>;
@@ -957,7 +1015,7 @@
 		num-ib-windows = <6>;
 		num-ob-windows = <2>;
 		max-link-speed = <2>;
-		msi-map = <0x0 &gic 0x0 0x1000>;
+		msi-map = <0x0 &its 0x0 0x1000>;
 		num-lanes = <1>;
 		phys = <&combphy2 PHY_TYPE_PCIE>;
 		phy-names = "pcie-phy";
@@ -1032,6 +1090,11 @@
 		status = "disabled";
 	};
 
+	/*
+	 * Testing showed that the HWRNG found in RK3566 produces unacceptably
+	 * low quality of random data, so the HWRNG isn't enabled for all RK356x
+	 * SoC variants despite its presence.
+	 */
 	rng: rng@fe388000 {
 		compatible = "rockchip,rk3568-rng";
 		reg = <0x0 0xfe388000 0x0 0x4000>;
@@ -1681,6 +1744,7 @@
 		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_PIPEPHY1>;
+		reset-names = "phy";
 		rockchip,pipe-grf = <&pipegrf>;
 		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
 		#phy-cells = <1>;
@@ -1697,6 +1761,7 @@
 		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
 		assigned-clock-rates = <100000000>;
 		resets = <&cru SRST_PIPEPHY2>;
+		reset-names = "phy";
 		rockchip,pipe-grf = <&pipegrf>;
 		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
 		#phy-cells = <1>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts b/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts
new file mode 100644
index 000000000000..b19f9b6be6bf
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3576.dtsi"
+
+/ {
+	model = "100ASK DshanPi A1 board";
+	compatible = "100ask,dshanpi-a1", "rockchip,rk3576";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	es8388_sound: es8388-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "On-board Analog ES8388";
+		simple-audio-card,widgets = "Microphone", "Headphone Mic",
+					    "Microphone", "Mic Pads",
+					    "Headphone", "Headphone",
+					    "Line Out", "Line Out";
+		simple-audio-card,routing = "Headphone", "LOUT1",
+					    "Headphone", "ROUT1",
+					    "Line Out", "LOUT2",
+					    "Line Out", "ROUT2",
+					    "RINPUT1", "Headphone Mic",
+					    "LINPUT2", "Mic Pads",
+					    "RINPUT2", "Mic Pads";
+		simple-audio-card,pin-switches = "Headphone", "Line Out";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "MASKROM";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	keys-1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "RECOVERY";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	keys-2 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 4>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-user2 {
+			label = "USER2";
+			linux,code = <BTN_2>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	keys-3 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio0_a0_d>;
+
+		button-user1 {
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "USER1";
+			linux,code = <BTN_1>;
+			wakeup-source;
+		};
+	};
+
+	vcc_in: regulator-vcc-12v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_in";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_1v8_s0: regulator-vcc-1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v0_pldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_m2: regulator-vcc-3v3-m2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_m2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_5v0_sys: regulator-vcc-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_in>;
+	};
+
+	vbus5v0_typec: regulator-vbus5v0-typec {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren_h>;
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy0>;
+	phy-supply = <&vcc_3v3_s0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth0m0_miim
+		     &eth0m0_tx_bus2
+		     &eth0m0_rx_bus2
+		     &eth0m0_rgmii_clk
+		     &eth0m0_rgmii_bus>;
+	status = "okay";
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy1>;
+	phy-supply = <&vcc_3v3_s0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth1m0_miim
+		     &eth1m0_tx_bus2
+		     &eth1m0_rx_bus2
+		     &eth1m0_rgmii_clk
+		     &eth1m0_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins
+			     &rk806_dvs1_null
+			     &rk806_dvs2_null
+			     &rk806_dvs3_null>;
+		system-power-controller;
+		vcc1-supply = <&vcc_5v0_sys>;
+		vcc2-supply = <&vcc_5v0_sys>;
+		vcc3-supply = <&vcc_5v0_sys>;
+		vcc4-supply = <&vcc_5v0_sys>;
+		vcc5-supply = <&vcc_5v0_sys>;
+		vcc6-supply = <&vcc_5v0_sys>;
+		vcc7-supply = <&vcc_5v0_sys>;
+		vcc8-supply = <&vcc_5v0_sys>;
+		vcc9-supply = <&vcc_5v0_sys>;
+		vcc10-supply = <&vcc_5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc_5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x11>;
+		clocks = <&cru CLK_SAI2_MCLKOUT_TO_IO>;
+		assigned-clocks = <&cru CLK_SAI2_MCLKOUT_TO_IO>;
+		assigned-clock-rates = <12288000>;
+		AVDD-supply = <&vcc_3v3_s0>;
+		DVDD-supply = <&vcc_3v3_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sai2m0_mclk>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&mdio0 {
+	rgmii_phy0: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac0_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset>;
+	reset-gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_m2>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac {
+		gmac0_rst: gmac0-rst {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		gmac1_rst: gmac1-rst {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-keys {
+		gpio0_a0_d: gpio0-a0-d {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_reset: pcie-reset {
+			rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		typec5v_pwren_h: typec5v-pwren-h {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sai6 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_pldo2_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	full-pwr-cycle-in-suspend;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s0>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vbus5v0_typec>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc_5v0_sys>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+&usbdp_phy {
+	status = "okay";
+};
+
+&usb_drd0_dwc3 {
+	status = "okay";
+};
+
+&usb_drd1_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5-v1.2-wifibt.dtso b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5-v1.2-wifibt.dtso
new file mode 100644
index 000000000000..242ccfaf711b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5-v1.2-wifibt.dtso
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * DT-overlay to enable the onboard WiFi and Bluetooth module present in v1.2
+ * boards. Note that v1.1 boards use a different module, so this probably won't
+ * work there.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&sdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		clock-names = "lpo";
+		clocks = <&hym8563>;
+		interrupt-names = "host-wake";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&wifi_wake_host>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart4 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clock-names = "lpo";
+		clocks = <&hym8563>;
+		device-wakeup-gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wakeup";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&bt_reg_on>, <&bt_wake_host>, <&host_wake_bt>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc_3v3_s3>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
index 7c7331936a7f..3386084f6318 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
@@ -10,6 +10,7 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3576.dtsi"
 
@@ -26,6 +27,17 @@
 		stdout-path = "serial0:1500000n8";
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds: leds {
 		compatible = "gpio-leds";
 
@@ -44,6 +56,34 @@
 		};
 	};
 
+	es8388_sound: es8388-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "On-board Analog ES8388";
+		simple-audio-card,widgets = "Microphone", "Headphone Mic",
+					    "Microphone", "Mic Pads",
+					    "Headphone", "Headphone",
+					    "Line Out", "Line Out";
+		simple-audio-card,routing = "Headphone", "LOUT1",
+					    "Headphone", "ROUT1",
+					    "Line Out", "LOUT2",
+					    "Line Out", "ROUT2",
+					    "RINPUT1", "Headphone Mic",
+					    "LINPUT2", "Mic Pads",
+					    "RINPUT2", "Mic Pads";
+		simple-audio-card,pin-switches = "Headphone", "Line Out";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
 	vcc_12v0_dcin: regulator-vcc-12v0-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_12v0_dcin";
@@ -105,6 +145,8 @@
 
 	vcc_3v3_pcie: regulator-vcc-3v3-pcie {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
 		regulator-name = "vcc_3v3_pcie";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -154,6 +196,30 @@
 		vin-supply = <&vcc_12v0_dcin>;
 	};
 
+	vcc_5v0_typec0: regulator-vcc-5v0-typec0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg0_pwren>;
+		regulator-name = "vcc_5v0_typec0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v0_device>;
+	};
+
+	vcc_5v0_usbhost: regulator-vcc-5v0-usbhost {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		regulator-name = "vcc_5v0_usbhost";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v0_device>;
+	};
+
 	vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_3v3_ufs_s0";
@@ -163,49 +229,80 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v0_sys>;
 	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on>;
+		reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
 };
 
 &cpu_l0 {
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
 &gmac0 {
 	phy-mode = "rgmii-id";
 	clock_in_out = "output";
-
-	snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 20000 100000>;
-
+	phy-handle = <&rgmii_phy0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&eth0m0_miim
 		     &eth0m0_tx_bus2
 		     &eth0m0_rx_bus2
 		     &eth0m0_rgmii_clk
-		     &eth0m0_rgmii_bus
-		     &ethm0_clk0_25m_out>;
-
-	phy-handle = <&rgmii_phy0>;
+		     &eth0m0_rgmii_bus>;
 	status = "okay";
 };
 
 &gmac1 {
 	phy-mode = "rgmii-id";
 	clock_in_out = "output";
-
-	snps,reset-gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 20000 100000>;
-
+	phy-handle = <&rgmii_phy1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&eth1m0_miim
 		     &eth1m0_tx_bus2
 		     &eth1m0_rx_bus2
 		     &eth1m0_rgmii_clk
-		     &eth1m0_rgmii_bus
-		     &ethm0_clk1_25m_out>;
-
-	phy-handle = <&rgmii_phy1>;
+		     &eth1m0_rgmii_bus>;
 	status = "okay";
 };
 
@@ -214,6 +311,30 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -574,12 +695,64 @@
 &i2c2 {
 	status = "okay";
 
+	usbc0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_interrupt>;
+		vbus-supply = <&vcc_5v0_typec0>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			/* fusb302 supports PD Rev 2.0 Ver 1.2 */
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
+			power-role = "source";
+			source-pdos = <PDO_FIXED(5000, 2000,
+						 PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>;
+
+			altmodes {
+				displayport {
+					svid = /bits/ 16 <0xff01>;
+					vdo = <0xffffffff>;
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_hs_ep: endpoint {
+						remote-endpoint = <&usb_drd0_hs_ep>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					usbc0_ss_ep: endpoint {
+						remote-endpoint = <&usb_drd0_ss_ep>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					usbc0_dp_ep: endpoint {
+						remote-endpoint = <&usbdp_phy_ep>;
+					};
+				};
+			};
+		};
+	};
+
 	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		clock-output-names = "hym8563";
 		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
 		wakeup-source;
@@ -587,11 +760,34 @@
 	};
 };
 
+&i2c3 {
+	status = "okay";
+
+	es8388: audio-codec@10 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x10>;
+		clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
+		AVDD-supply = <&vcca_3v3_s0>;
+		DVDD-supply = <&vcc_3v3_s0>;
+		HPVDD-supply = <&vcca_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		assigned-clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sai1m0_mclk>;
+	};
+};
+
 &mdio0 {
 	rgmii_phy0: phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0x1>;
-		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac0_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -599,11 +795,32 @@
 	rgmii_phy1: phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0x1>;
-		clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
 	};
 };
 
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset>;
+	reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie>;
+	status = "okay";
+};
+
 &pinctrl {
+	gmac {
+		gmac0_rst: gmac0-rst {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		gmac1_rst: gmac1-rst {
+			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	headphone {
 		hp_det: hp-det {
 			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -624,6 +841,70 @@
 			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+		pcie_reset: pcie-reset {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		usb_otg0_pwren: usb-otg0-pwren {
+			rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		usbc0_interrupt: usbc0-interrupt {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		usbc0_sbu1: usbc0-sbu1 {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+		usbc0_sbu2: usbc0-sbu2 {
+			rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wireless-wlan {
+		wifi_wake_host: wifi-wake-host {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sai1m0_lrck
+		     &sai1m0_sclk
+		     &sai1m0_sdi0
+		     &sai1m0_sdo0>;
+	status = "okay";
+};
+
+&sai6 {
+	status = "okay";
 };
 
 &sdhci {
@@ -638,6 +919,23 @@
 	status = "okay";
 };
 
+&sdio {
+	bus-width = <4>;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-sd;
+	no-mmc;
+	non-removable;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	wakeup-source;
+	status = "okay";
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
@@ -652,7 +950,92 @@
 	status = "okay";
 };
 
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc_5v0_usbhost>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-0 = <&uart0m0_xfer>;
 	status = "okay";
 };
+
+/* Used by Bluetooth modules, enabled in a version specific overlay */
+&uart4 {
+	pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&usb_drd0_dwc3 {
+	usb-role-switch;
+	dr_mode = "otg";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb_drd0_hs_ep: endpoint {
+				remote-endpoint = <&usbc0_hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			usb_drd0_ss_ep: endpoint {
+				remote-endpoint = <&usbc0_ss_ep>;
+			};
+		};
+	};
+};
+
+&usb_drd1_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdp_phy {
+	mode-switch;
+	orientation-switch;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbc0_sbu1 &usbc0_sbu2>;
+	sbu1-dc-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	port {
+		usbdp_phy_ep: endpoint {
+			remote-endpoint = <&usbc0_dp_ep>;
+		};
+	};
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
new file mode 100644
index 000000000000..db8fef7a4f1b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
@@ -0,0 +1,943 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3576.dtsi"
+
+/ {
+	model = "Rockchip RK3576 EVB V10 Board";
+	compatible = "rockchip,rk3576-evb1-v10", "rockchip,rk3576";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc_keys: adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-back {
+			label = "back";
+			linux,code = <KEY_BACK>;
+			press-threshold-microvolt = <1235000>;
+		};
+
+		button-menu {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <890000>;
+		};
+
+		button-vol-down {
+			label = "volume down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <417000>;
+		};
+
+		button-vol-up {
+			label = "volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		work_led: led-0 {
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vbus5v0_typec: regulator-vbus5v0-typec {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc5v0_device>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg0_pwren>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc1v2_ufs_vccq_s0: regulator-vcc1v2-ufs-vccq-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2_ufs_vccq_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_ufs_vccq2_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc3v3_lcd_n: regulator-vcc3v3-lcd0-n {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd0_n";
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc_3v3_s0>;
+	};
+
+	vcc3v3_pcie1: regulator-vcc3v3-pcie1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_rtc_s5";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_device: regulator-vcc5v0-device {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_device";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc5v0_device>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+	};
+
+	vcc_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_1v8_s0: regulator-vcc-1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v0_pldo_s3";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_ufs_s0: regulator-vcc-ufs-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ufs_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_wifi_reg_on: regulator-wifi-reg-on {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wifi_reg_on>;
+		pinctrl-names = "default";
+		regulator-name = "wifi_reg_on";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&rgmii_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth0m0_miim
+		     &eth0m0_tx_bus2
+		     &eth0m0_rx_bus2
+		     &eth0m0_rgmii_clk
+		     &eth0m0_rgmii_bus
+		     &ethm0_clk0_25m_out>;
+	tx_delay = <0x21>;
+	status = "okay";
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth1m0_miim
+		     &eth1m0_tx_bus2
+		     &eth1m0_rx_bus2
+		     &eth1m0_rgmii_clk
+		     &eth1m0_rgmii_bus
+		     &ethm0_clk1_25m_out>;
+	tx_delay = <0x20>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk806: pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		wakeup-source;
+		#clock-cells = <0>;
+	};
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		assigned-clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		assigned-clock-rates = <25000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgmii_phy0_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+		assigned-clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+		assigned-clock-rates = <25000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgmii_phy1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_rst>;
+	reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0 0 0 0 0>;
+		bus-range = <0x0 0xf>;
+		device_type = "pci";
+		ranges;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi: wifi@0,0 {
+			compatible = "pci14e4,449d";
+			reg = <0x10000 0 0 0 0>;
+			clocks = <&hym8563>;
+			clock-names = "lpo";
+		};
+	};
+};
+
+&pcie1 {
+	reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie1>;
+
+	/*
+	 * Disable usb_drd1_dwc3 if enabling pcie1 and set Dial_Switch_1
+	 * to low state according to the schematic of page 17.
+	 */
+	status = "disabled";
+};
+
+&pinctrl {
+	bluetooth {
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	network {
+		rgmii_phy0_rst: rgmii-phy0-rst {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		rgmii_phy1_rst: rgmii-phy1-rst {
+			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie0 {
+		pcie0_rst: pcie0-rst {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg0_pwren: usb-otg0-pwren {
+			rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc0_int: usbc0-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_wake_host: wifi-wake-host {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	full-pwr-cycle-in-suspend;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vbus5v0_typec>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&hym8563>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc_3v3_s3>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
+};
+
+&ufshc {
+	status = "okay";
+};
+
+&usbdp_phy {
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&usb_drd0_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_drd1_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi
new file mode 100644
index 000000000000..9187012d6fa4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi
@@ -0,0 +1,749 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 John Clark <inindev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3576.dtsi"
+
+/ {
+	model = "Luckfox Core3576 Module";
+	compatible = "luckfox,core3576","rockchip,rk3576";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		hdmi-pwr-supply = <&vcc_5v0_hdmi>;
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vbus_5v0_typec: regulator-vbus-5v0-typec {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg0_pwr_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vbus5v0_typec";
+		vin-supply = <&vcc_5v0_device>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc_5v0_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		regulator-name = "vcc_2v0_pldo_s3";
+		vin-supply = <&vcc_5v0_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc_3v3_pcie: regulator-vcc-3v3-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_pcie";
+		startup-delay-us = <1000>;
+		vin-supply = <&vcc_5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_rtc_s5";
+		vin-supply = <&vcc_5v0_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc_5v0_dcin: regulator-vcc-5v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_dcin";
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc_5v0_device: regulator-vcc-5v0-device {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_device";
+		vin-supply = <&vcc_5v0_dcin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_5v0_hdmi: regulator-vcc-5v0-hdmi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_con_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_hdmi";
+		vin-supply = <&vcc_5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_5v0_host: regulator-vcc-5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwr_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_host";
+		vin-supply = <&vcc_5v0_device>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_5v0_sys: regulator-vcc-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_sys";
+		vin-supply = <&vcc_5v0_dcin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc_5v0_sys>;
+		vcc2-supply = <&vcc_5v0_sys>;
+		vcc3-supply = <&vcc_5v0_sys>;
+		vcc4-supply = <&vcc_5v0_sys>;
+		vcc5-supply = <&vcc_5v0_sys>;
+		vcc6-supply = <&vcc_5v0_sys>;
+		vcc7-supply = <&vcc_5v0_sys>;
+		vcc8-supply = <&vcc_5v0_sys>;
+		vcc9-supply = <&vcc_5v0_sys>;
+		vcc10-supply = <&vcc_5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc_5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset>;
+	reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	hdmi {
+		hdmi_con_en: hdmi-con-en {
+			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_reset: pcie-reset {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_host_pwr_en: usb-host-pwr-en {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg0_pwr_en: usb-otg0-pwr-en {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc0_int: usbc0-int {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rng {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	full-pwr-cycle-in-suspend;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc_5v0_host>;
+	status = "okay";
+};
+
+&usb_drd1_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts
new file mode 100644
index 000000000000..6c75959adfe1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 John Clark <inindev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "rk3576-luckfox-core3576.dtsi"
+
+/ {
+	model = "Luckfox Omni3576 Carrier Board";
+	compatible = "luckfox,omni3576", "luckfox,core3576", "rockchip,rk3576";
+
+	aliases {
+		mmc1 = &sdmmc;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_green_pin>;
+
+		green_led: green-led {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&pinctrl {
+	leds {
+		led_green_pin: led-green-pin {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts
new file mode 100644
index 000000000000..cce34c541f7c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts
@@ -0,0 +1,941 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd.
+ * Copyright (c) 2025 John Clark <inindev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3576.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi M5";
+	compatible = "friendlyarm,nanopi-m5", "rockchip,rk3576";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		hdmi-pwr-supply = <&vcc5v_hdmi_tx>;
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		usr_button: key-1 {
+			debounce-interval = <50>;
+			gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "user";
+			linux,code = <BTN_1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usr_button_l>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_sys: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>;
+			label = "sys";
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_sys_h>;
+		};
+
+		led1: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+			label = "led1";
+			linux,default-trigger = "netdev";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led1_h>;
+		};
+
+		led2: led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>;
+			label = "led2";
+			linux,default-trigger = "netdev";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led2_h>;
+		};
+	};
+
+	usb3_port2_5v: regulator-usb3-port2-5v {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_host_pwren_h>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb3_port2_5v";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-name = "vcc12v_dcin";
+	};
+
+	vcc3v3_m2_keym: regulator-vcc3v3-m2-keym {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie0_pwren_h>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_m2_keym";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc3v3_sd_s0: regulator-vcc3v3-sd-s0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwren_h>;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_sd_s0";
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc5v0_sys_s5: regulator-vcc5v0-sys-s5 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_sys_s5";
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg0_pwren_h>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_usb_otg0";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc5v_hdmi_tx: regulator-vcc5v-hdmi-tx {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v_hdmi_tx";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		regulator-name = "vcc_2v0_pldo_s3";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_s0";
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_l>;
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "realtek,rt5616-codec";
+
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"IN1P", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Microphone", "Microphone Jack";
+
+		simple-audio-card,codec {
+			sound-dai = <&rt5616>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&fspi1m1_pins {
+	/* gpio1_d5, gpio1_c4-c7 (clk, d0-d4) are for spi nor flash */
+	/* gpio1_d0-d4 muxed to sai2 audio functions */
+	rockchip,pins =
+		<1 RK_PD5 3 &pcfg_pull_none>,
+		<1 RK_PC4 3 &pcfg_pull_none>,
+		<1 RK_PC5 3 &pcfg_pull_none>,
+		<1 RK_PC6 3 &pcfg_pull_none>,
+		<1 RK_PC7 3 &pcfg_pull_none>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3_s3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth0m0_miim>,
+		    <&eth0m0_tx_bus2>,
+		    <&eth0m0_rx_bus2>,
+		    <&eth0m0_rgmii_clk>,
+		    <&eth0m0_rgmii_bus>;
+	status = "okay";
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3_s3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth1m0_miim>,
+		    <&eth1m0_tx_bus2>,
+		    <&eth1m0_rx_bus2>,
+		    <&eth1m0_rgmii_clk>,
+		    <&eth1m0_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys_s5>;
+		vcc2-supply = <&vcc5v0_sys_s5>;
+		vcc3-supply = <&vcc5v0_sys_s5>;
+		vcc4-supply = <&vcc5v0_sys_s5>;
+		vcc5-supply = <&vcc5v0_sys_s5>;
+		vcc6-supply = <&vcc5v0_sys_s5>;
+		vcc7-supply = <&vcc5v0_sys_s5>;
+		vcc8-supply = <&vcc5v0_sys_s5>;
+		vcc9-supply = <&vcc5v0_sys_s5>;
+		vcc10-supply = <&vcc5v0_sys_s5>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys_s5>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys_s5>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_npu_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5m3_xfer>;
+	status = "okay";
+
+	rt5616: audio-codec@1b {
+		compatible = "realtek,rt5616";
+		reg = <0x1b>;
+		assigned-clocks = <&cru CLK_SAI2_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru CLK_SAI2_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&mdio0 {
+	rgmii_phy0: phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac0_int>, <&gmac0_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_int>, <&gmac1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_perstn>;
+	reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_m2_keym>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac {
+		gmac0_int: gmac0-int {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		gmac0_rst: gmac0-rst {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		gmac1_int: gmac1-int {
+			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		gmac1_rst: gmac1-rst {
+			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		usr_button_l: usr-button-l {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_sys_h: led-sys-h {
+			rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		led1_h: led1-h {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		led2_h: led2-h {
+			rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie0_pwren_h: pcie0-pwren-h {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		pcie0_perstn: pcie0-perstn {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc0_pwren_h: sdmmc0-pwren-h {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sound {
+		hp_det_l: hp-det-l {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb3_host_pwren_h: usb3-host-pwren-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		usb_otg0_pwren_h: usb-otg0-pwren-h {
+			rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_det>, <&sdmmc0_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc3v3_sd_s0>;
+	status = "okay";
+};
+
+&sfc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspi1m1_csn0>, <&fspi1m1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8_s3>;
+	};
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg0>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&usb3_port2_5v>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbdp_phy {
+	status = "okay";
+};
+
+&usb_drd0_dwc3 {
+	dr_mode = "otg";
+	extcon = <&u2phy0>;
+	status = "okay";
+};
+
+&usb_drd1_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts
new file mode 100644
index 000000000000..31fbefaeceab
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts
@@ -0,0 +1,860 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2025 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+
+#include "rk3576.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R76S";
+	compatible = "friendlyarm,nanopi-r76s", "rockchip,rk3576";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_but_pin>;
+
+		button-reset {
+			label = "reset";
+			gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+			linux,code = <KEY_RESTART>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led1_h>, <&led_sys_h>, <&led2_h>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		hdmi-pwr-supply = <&vcc5v_hdmi_tx>;
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_rtc_s5";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc5v_dcin: regulator-vcc5v-dcin {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v_dcin";
+	};
+
+	vcc5v_hdmi_tx: regulator-vcc5v-hdmi-tx {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_tx_on_h>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v_hdmi_tx";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc5v0_device_s0: regulator-vcc5v0-device-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_device_s0";
+		vin-supply = <&vcc5v_dcin>;
+	};
+
+	vcc5v0_sys_s5: regulator-vcc5v0-sys-s5 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_sys_s5";
+		vin-supply = <&vcc5v_dcin>;
+	};
+
+	vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg0_pwren_h>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_usb_otg0";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc_1v8_s0: regulator-vcc-1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcc_1v8_s0";
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		regulator-name = "vcc_2v0_pldo_s3";
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_s0";
+		vin-supply = <&vcc_3v3_s3>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys_s5>;
+		vcc2-supply = <&vcc5v0_sys_s5>;
+		vcc3-supply = <&vcc5v0_sys_s5>;
+		vcc4-supply = <&vcc5v0_sys_s5>;
+		vcc5-supply = <&vcc5v0_sys_s5>;
+		vcc6-supply = <&vcc5v0_sys_s5>;
+		vcc7-supply = <&vcc5v0_sys_s5>;
+		vcc8-supply = <&vcc5v0_sys_s5>;
+		vcc9-supply = <&vcc5v0_sys_s5>;
+		vcc10-supply = <&vcc5v0_sys_s5>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys_s5>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys_s5>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_npu_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int_l>;
+		wakeup-source;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_perstn>;
+	reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_perstn>;
+	reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_host_h: bt-wake-host-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt_h: host-wake-bt-h {
+			rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-keys {
+		user_but_pin: user-but-pin {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		led_sys_h: led-sys-h {
+			rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led1_h: led1-h {
+			rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led2_h: led2-h {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		hdmi_tx_on_h: hdmi-tx-on-h {
+			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		rtc_int_l: rtc-int-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie0_perstn: pcie0-perstn {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie1_perstn: pcie1-perstn {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_otg0_pwren_h: usb-otg0-pwren-h {
+			rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_wake_host_h: wifi-wake-host-h {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sai6 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&sdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
+	non-removable;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	wakeup-source;
+	status = "okay";
+
+	rtl8822cs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_wake_host_h>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	full-pwr-cycle-in-suspend;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg0>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5m0_xfer &uart5m0_ctsn &uart5m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_wake_host_h &host_wake_bt_h &bt_reg_on_h>;
+	};
+};
+
+&usbdp_phy {
+	status = "okay";
+};
+
+&usb_drd0_dwc3 {
+	dr_mode = "host";
+	extcon = <&u2phy0>;
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
new file mode 100644
index 000000000000..d0ab1d1e0e11
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
@@ -0,0 +1,799 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Firefly Technology Co. Ltd
+ * Copyright (c) 2024 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3576.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3576-PC";
+	compatible = "firefly,roc-rk3576-pc", "rockchip,rk3576";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "Maskrom";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	adc-keys-1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vbus5v0_typec: regulator-vbus5v0-typec {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg0_pwren_h>;
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_device_s0>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc1v2_ufs_vccq_s0: regulator-vcc1v2-ufs-vccq-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2_ufs_vccq_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_ufs_vccq2_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc3v3_lcd_s0: regulator-vcc3v3-lcd-s0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwren_h>;
+		regulator-name = "vcc3v3-lcd-s0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_pcie: regulator-vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwren_h>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_rtc_s5";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc5v0_device_s0: regulator-vcc5v0-device-s0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5vd_en>;
+		regulator-name = "vcc5v0_device";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_sys_s5: regulator-vcc5v0-sys-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb20_host1: regulator-vcc5v0-usb20-host1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_host_pwren_h>;
+		regulator-name = "vcc5v0_host1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_device_s0>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc_1v8_s0: regulator-vcc-1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v0_pldo_s3";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_ufs_s0: regulator-vcc-ufs-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ufs_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys_s5>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth0m0_miim
+		     &eth0m0_tx_bus2
+		     &eth0m0_rx_bus2
+		     &eth0m0_rgmii_clk
+		     &eth0m0_rgmii_bus
+		     &ethm0_clk0_25m_out>;
+	/* Use rgmii-rxid mode to disable rx delay inside Soc */
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&rgmii_phy0>;
+	tx_delay = <0x21>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	rgmii_phy0: phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		/* Reset time is 20ms, 100ms for rtl8211f */
+		reset-delay-us = <20000>;
+		reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <100000>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys_s5>;
+		vcc2-supply = <&vcc5v0_sys_s5>;
+		vcc3-supply = <&vcc5v0_sys_s5>;
+		vcc4-supply = <&vcc5v0_sys_s5>;
+		vcc5-supply = <&vcc5v0_sys_s5>;
+		vcc6-supply = <&vcc5v0_sys_s5>;
+		vcc7-supply = <&vcc5v0_sys_s5>;
+		vcc8-supply = <&vcc5v0_sys_s5>;
+		vcc9-supply = <&vcc5v0_sys_s5>;
+		vcc10-supply = <&vcc5v0_sys_s5>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys_s5>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys_s5>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* pc9202 watchdog@3c with enable-gpio gpio0-c3 */
+
+	/* hnyetek,husb311 typec-portc@4e */
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int_l>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&sdmmc {
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		rtc_int_l: rtc-int-l {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	power {
+		lcd_pwren_h: lcd-pwren-h {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5vd_en: vcc5vd-en {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_pwren_h: pcie-pwren-h {
+			rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		hub_reset_h: hub-reset-h {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb3_host_pwren_h: usb3-host-pwren-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg0_pwren_h: usb-otg0-pwren-h {
+			rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc0_int_l: usbc0-int-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	watchdog {
+		wd_en: wd-en {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn>;
+	status = "okay";
+};
+
+/* On the extension pin header */
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6m3_xfer>;
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts
new file mode 100644
index 000000000000..7023dc326d0e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts
@@ -0,0 +1,847 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3576.dtsi"
+
+/ {
+	model = "Radxa ROCK 4D";
+	compatible = "radxa,rock-4d", "rockchip,rk3576";
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_h>;
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_rgb_g &led_rgb_r>;
+
+		power-led {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_5v0_dcin: regulator-vcc-5v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_dcin";
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_1v2_ufs_vccq_s0: regulator-vcc-1v2-ufs-vccq-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-name = "vcc_1v2_ufs_vccq_s0";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_1v8_s0: regulator-vcc-1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcc_1v8_s0";
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_1v8_ufs_vccq2_s0: regulator-vcc-1v8-ufs-vccq2-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcc_1v8_ufs_vccq2_s0";
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		regulator-name = "vcc_2v0_pldo_s3";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_pcie: regulator-vcc-3v3-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwren>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_pcie";
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_rtc_s5";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_s0";
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_ufs_s0";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_wifi: regulator-vcc-3v3-wifi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_wifi_pwr>;
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_wifi";
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_5v0_device: regulator-vcc-5v0-device {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_device";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_5v0_host: regulator-vcc-5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_5v0_otg: regulator-vcc-5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_otg";
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_5v0_sys: regulator-vcc-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc_5v0_sys";
+		vin-supply = <&vcc_5v0_dcin>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth0m0_miim
+		     &eth0m0_tx_bus2
+		     &eth0m0_rx_bus2
+		     &eth0m0_rgmii_clk
+		     &eth0m0_rgmii_bus
+		     &ethm0_clk0_25m_out>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins
+			     &rk806_dvs1_null
+			     &rk806_dvs2_null
+			     &rk806_dvs3_null>;
+		system-power-controller;
+		vcc1-supply = <&vcc_5v0_sys>;
+		vcc2-supply = <&vcc_5v0_sys>;
+		vcc3-supply = <&vcc_5v0_sys>;
+		vcc4-supply = <&vcc_5v0_sys>;
+		vcc5-supply = <&vcc_5v0_sys>;
+		vcc6-supply = <&vcc_5v0_sys>;
+		vcc7-supply = <&vcc_5v0_sys>;
+		vcc8-supply = <&vcc_5v0_sys>;
+		vcc9-supply = <&vcc_5v0_sys>;
+		vcc10-supply = <&vcc_5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc_5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_npu_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		assigned-clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		assigned-clock-rates = <25000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset>;
+	reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_rgb_g: led-green-en {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		led_rgb_r: led-red-en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwren: pcie-pwren {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		pcie_reset: pcie-reset {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>;
+
+		};
+	};
+
+	wifi {
+		usb_wifi_pwr: usb-wifi-pwr {
+			rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+		wifi_en_h: wifi-en-h {
+			rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&sai6 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+
+&sfc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspi0_pins &fspi0_csn0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8_s3>;
+	};
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc_5v0_otg>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc_5v0_host>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+&ufshc {
+	status = "okay";
+};
+
+&usbdp_phy {
+	status = "okay";
+};
+
+&usb_drd0_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_drd1_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index 436232ffe4d1..a86fc6b4e8c4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/power/rockchip,rk3576-power.h>
 #include <dt-bindings/reset/rockchip,rk3576-cru.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,rk3576";
@@ -111,11 +112,11 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <485>;
-			clocks = <&scmi_clk ARMCLK_L>;
+			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
-			#cooling-cells = <2>;
 			dynamic-power-coefficient = <120>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_l1: cpu@1 {
@@ -124,9 +125,10 @@
 			reg = <0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <485>;
-			clocks = <&scmi_clk ARMCLK_L>;
+			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_l2: cpu@2 {
@@ -135,9 +137,10 @@
 			reg = <0x2>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <485>;
-			clocks = <&scmi_clk ARMCLK_L>;
+			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_l3: cpu@3 {
@@ -146,9 +149,10 @@
 			reg = <0x3>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <485>;
-			clocks = <&scmi_clk ARMCLK_L>;
+			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b0: cpu@100 {
@@ -157,11 +161,11 @@
 			reg = <0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			clocks = <&scmi_clk ARMCLK_B>;
+			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
-			#cooling-cells = <2>;
 			dynamic-power-coefficient = <320>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b1: cpu@101 {
@@ -170,9 +174,10 @@
 			reg = <0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			clocks = <&scmi_clk ARMCLK_B>;
+			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b2: cpu@102 {
@@ -181,9 +186,10 @@
 			reg = <0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			clocks = <&scmi_clk ARMCLK_B>;
+			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b3: cpu@103 {
@@ -192,9 +198,10 @@
 			reg = <0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			clocks = <&scmi_clk ARMCLK_B>;
+			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		idle-states {
@@ -269,12 +276,6 @@
 			opp-microvolt = <900000 900000 950000>;
 			clock-latency-ns = <40000>;
 		};
-
-		opp-2208000000 {
-			opp-hz = /bits/ 64 <2208000000>;
-			opp-microvolt = <950000 950000 950000>;
-			clock-latency-ns = <40000>;
-		};
 	};
 
 	cluster1_opp_table: opp-table-cluster1 {
@@ -341,12 +342,6 @@
 			opp-microvolt = <925000 925000 950000>;
 			clock-latency-ns = <40000>;
 		};
-
-		opp-2304000000 {
-			opp-hz = /bits/ 64 <2304000000>;
-			opp-microvolt = <950000 950000 950000>;
-			clock-latency-ns = <40000>;
-		};
 	};
 
 	gpu_opp_table: opp-table-gpu {
@@ -393,6 +388,11 @@
 		};
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	firmware {
 		scmi: scmi {
 			compatible = "arm,scmi-smc";
@@ -408,6 +408,90 @@
 		};
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "HDMI";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3576-pinctrl";
+		rockchip,grf = <&ioc_grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@27320000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0x27320000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2ae10000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0x2ae10000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2ae20000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0x2ae20000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2ae30000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0x2ae30000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@2ae40000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0x2ae40000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	pmu_a53: pmu-a53 {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -431,6 +515,143 @@
 		method = "smc";
 	};
 
+	thermal_zones: thermal-zones {
+		/* sensor near the center of the SoC */
+		package_thermal: package-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				package_crit: package-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		/* sensor for cluster1 (big Cortex-A72 cores) */
+		bigcore_thermal: bigcore-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				bigcore_alert: bigcore-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				bigcore_crit: bigcore-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&bigcore_alert>;
+					cooling-device =
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		/* sensor for cluster0 (little Cortex-A53 cores) */
+		littlecore_thermal: littlecore-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 2>;
+
+			trips {
+				littlecore_alert: littlecore-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				littlecore_crit: littlecore-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&littlecore_alert>;
+					cooling-device =
+						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 3>;
+
+			trips {
+				gpu_alert: gpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		npu_thermal: npu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 4>;
+
+			trips {
+				npu_crit: npu-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr_thermal: ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 5>;
+
+			trips {
+				ddr_crit: ddr-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -445,6 +666,166 @@
 		#size-cells = <2>;
 		ranges;
 
+		pcie0: pcie@22000000 {
+			compatible = "rockchip,rk3576-pcie", "rockchip,rk3568-pcie";
+			reg = <0x0 0x22000000 0x0 0x00400000>,
+			      <0x0 0x2a200000 0x0 0x00010000>,
+			      <0x0 0x20000000 0x0 0x00100000>;
+			reg-names = "dbi", "apb", "config";
+			bus-range = <0x0 0xf>;
+			clocks = <&cru ACLK_PCIE0_MST>, <&cru ACLK_PCIE0_SLV>,
+				 <&cru ACLK_PCIE0_DBI>, <&cru PCLK_PCIE0>,
+				 <&cru CLK_PCIE0_AUX>;
+			clock-names = "aclk_mst", "aclk_slv",
+				      "aclk_dbi", "pclk",
+				      "aux";
+			device_type = "pci";
+			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+					<0 0 0 2 &pcie0_intc 1>,
+					<0 0 0 3 &pcie0_intc 2>,
+					<0 0 0 4 &pcie0_intc 3>;
+			linux,pci-domain = <0>;
+			max-link-speed = <2>;
+			num-ib-windows = <8>;
+			num-viewport = <8>;
+			num-ob-windows = <2>;
+			num-lanes = <1>;
+			phys = <&combphy0_ps PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&power RK3576_PD_PHP>;
+			ranges = <0x01000000 0x0 0x20100000 0x0 0x20100000 0x0 0x00100000
+				  0x02000000 0x0 0x20200000 0x0 0x20200000 0x0 0x00e00000
+				  0x03000000 0x9 0x00000000 0x9 0x00000000 0x0 0x80000000>;
+			resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
+			reset-names = "pwr", "pipe";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			pcie0_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		pcie1: pcie@22400000 {
+			compatible = "rockchip,rk3576-pcie", "rockchip,rk3568-pcie";
+			reg = <0x0 0x22400000 0x0 0x00400000>,
+			      <0x0 0x2a210000 0x0 0x00010000>,
+			      <0x0 0x21000000 0x0 0x00100000>;
+			reg-names = "dbi", "apb", "config";
+			bus-range = <0x20 0x2f>;
+			clocks = <&cru ACLK_PCIE1_MST>, <&cru ACLK_PCIE1_SLV>,
+				 <&cru ACLK_PCIE1_DBI>, <&cru PCLK_PCIE1>,
+				 <&cru CLK_PCIE1_AUX>;
+			clock-names = "aclk_mst", "aclk_slv",
+				      "aclk_dbi", "pclk",
+				      "aux";
+			device_type = "pci";
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+					<0 0 0 2 &pcie1_intc 1>,
+					<0 0 0 3 &pcie1_intc 2>,
+					<0 0 0 4 &pcie1_intc 3>;
+			linux,pci-domain = <1>;
+			max-link-speed = <2>;
+			num-ib-windows = <8>;
+			num-viewport = <8>;
+			num-ob-windows = <2>;
+			num-lanes = <1>;
+			phys = <&combphy1_psu PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&power RK3576_PD_SUBPHP>;
+			ranges = <0x01000000 0x0 0x21100000 0x0 0x21100000 0x0 0x00100000
+				  0x02000000 0x0 0x21200000 0x0 0x21200000 0x0 0x00e00000
+				  0x03000000 0x9 0x80000000 0x9 0x80000000 0x0 0x80000000>;
+			resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
+			reset-names = "pwr", "pipe";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			pcie1_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		usb_drd0_dwc3: usb@23000000 {
+			compatible = "rockchip,rk3576-dwc3", "snps,dwc3";
+			reg = <0x0 0x23000000 0x0 0x400000>;
+			clocks = <&cru CLK_REF_USB3OTG0>,
+				 <&cru CLK_SUSPEND_USB3OTG0>,
+				 <&cru ACLK_USB3OTG0>;
+			clock-names = "ref_clk", "suspend_clk", "bus_clk";
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3576_PD_USB>;
+			resets = <&cru SRST_A_USB3OTG0>;
+			dr_mode = "otg";
+			phys = <&u2phy0_otg>, <&usbdp_phy PHY_TYPE_USB3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			snps,parkmode-disable-hs-quirk;
+			snps,parkmode-disable-ss-quirk;
+			status = "disabled";
+		};
+
+		usb_drd1_dwc3: usb@23400000 {
+			compatible = "rockchip,rk3576-dwc3", "snps,dwc3";
+			reg = <0x0 0x23400000 0x0 0x400000>;
+			clocks = <&cru CLK_REF_USB3OTG1>,
+				 <&cru CLK_SUSPEND_USB3OTG1>,
+				 <&cru ACLK_USB3OTG1>;
+			clock-names = "ref_clk", "suspend_clk", "bus_clk";
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3576_PD_PHP>;
+			resets = <&cru SRST_A_USB3OTG1>;
+			dr_mode = "otg";
+			phys = <&u2phy1_otg>, <&combphy1_psu PHY_TYPE_USB3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			snps,dis_rxdet_inp3_quirk;
+			snps,parkmode-disable-hs-quirk;
+			snps,parkmode-disable-ss-quirk;
+			dma-coherent;
+			status = "disabled";
+		};
+
 		sys_grf: syscon@2600a000 {
 			compatible = "rockchip,rk3576-sys-grf", "syscon";
 			reg = <0x0 0x2600a000 0x0 0x2000>;
@@ -515,6 +896,76 @@
 			reg = <0x0 0x2602c000 0x0 0x2000>;
 		};
 
+		usb2phy_grf: syscon@2602e000 {
+			compatible = "rockchip,rk3576-usb2phy-grf", "syscon", "simple-mfd";
+			reg = <0x0 0x2602e000 0x0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u2phy0: usb2-phy@0 {
+				compatible = "rockchip,rk3576-usb2phy";
+				reg = <0x0 0x10>;
+				resets = <&cru SRST_OTGPHY_0>, <&cru SRST_P_USBPHY_GRF_0>;
+				reset-names = "phy", "apb";
+				clocks = <&cru CLK_PHY_REF_SRC>,
+					 <&cru ACLK_MMU2>,
+					 <&cru ACLK_SLV_MMU2>;
+				clock-names = "phyclk", "aclk", "aclk_slv";
+				clock-output-names = "usb480m_phy0";
+				#clock-cells = <0>;
+				status = "disabled";
+
+				u2phy0_otg: otg-port {
+					#phy-cells = <0>;
+					interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "otg-bvalid", "otg-id", "linestate";
+					status = "disabled";
+				};
+			};
+
+			u2phy1: usb2-phy@2000 {
+				compatible = "rockchip,rk3576-usb2phy";
+				reg = <0x2000 0x10>;
+				resets = <&cru SRST_OTGPHY_1>, <&cru SRST_P_USBPHY_GRF_1>;
+				reset-names = "phy", "apb";
+				clocks = <&cru CLK_PHY_REF_SRC>,
+					 <&cru ACLK_MMU1>,
+					 <&cru ACLK_SLV_MMU1>;
+				clock-names = "phyclk", "aclk", "aclk_slv";
+				clock-output-names = "usb480m_phy1";
+				#clock-cells = <0>;
+				status = "disabled";
+
+				u2phy1_otg: otg-port {
+					#phy-cells = <0>;
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "otg-bvalid", "otg-id", "linestate";
+					status = "disabled";
+				};
+			};
+		};
+
+		hdptxphy_grf: syscon@26032000 {
+			compatible = "rockchip,rk3576-hdptxphy-grf", "syscon";
+			reg = <0x0 0x26032000 0x0 0x100>;
+		};
+
+		mipidcphy_grf: syscon@26034000 {
+			compatible = "rockchip,rk3576-dcphy-grf", "syscon";
+			reg = <0x0 0x26034000 0x0 0x2000>;
+			clocks = <&cru PCLK_PMUPHY_ROOT>;
+		};
+
+		vo1_grf: syscon@26036000 {
+			compatible = "rockchip,rk3576-vo1-grf", "syscon";
+			reg = <0x0 0x26036000 0x0 0x100>;
+			clocks = <&cru PCLK_VO1_ROOT>;
+		};
+
 		sdgmac_grf: syscon@26038000 {
 			compatible = "rockchip,rk3576-sdgmac-grf", "syscon";
 			reg = <0x0 0x26038000 0x0 0x1000>;
@@ -811,7 +1262,7 @@
 		gpu: gpu@27800000 {
 			compatible = "rockchip,rk3576-mali", "arm,mali-bifrost";
 			reg = <0x0 0x27800000 0x0 0x200000>;
-			assigned-clocks = <&scmi_clk CLK_GPU>;
+			assigned-clocks = <&scmi_clk SCMI_CLK_GPU>;
 			assigned-clock-rates = <198000000>;
 			clocks = <&cru CLK_GPU>;
 			clock-names = "core";
@@ -826,6 +1277,226 @@
 			status = "disabled";
 		};
 
+		vop: vop@27d00000 {
+			compatible = "rockchip,rk3576-vop";
+			reg = <0x0 0x27d00000 0x0 0x3000>, <0x0 0x27d05000 0x0 0x1000>;
+			reg-names = "vop", "gamma-lut";
+			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "sys",
+					  "vp0",
+					  "vp1",
+					  "vp2";
+			clocks = <&cru ACLK_VOP>,
+				 <&cru HCLK_VOP>,
+				 <&cru DCLK_VP0>,
+				 <&cru DCLK_VP1>,
+				 <&cru DCLK_VP2>,
+				 <&hdptxphy>;
+			clock-names = "aclk",
+				      "hclk",
+				      "dclk_vp0",
+				      "dclk_vp1",
+				      "dclk_vp2",
+				      "pll_hdmiphy0";
+			iommus = <&vop_mmu>;
+			power-domains = <&power RK3576_PD_VOP>;
+			rockchip,grf = <&sys_grf>;
+			rockchip,pmu = <&pmu>;
+			status = "disabled";
+
+			vop_out: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				vp0: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				vp1: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				vp2: port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+			};
+		};
+
+		vop_mmu: iommu@27d07e00 {
+			compatible = "rockchip,rk3576-iommu", "rockchip,rk3568-iommu";
+			reg = <0x0 0x27d07e00 0x0 0x100>, <0x0 0x27d07f00 0x0 0x100>;
+			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+			clock-names = "aclk", "iface";
+			#iommu-cells = <0>;
+			power-domains = <&power RK3576_PD_VOP>;
+			status = "disabled";
+		};
+
+		sai5: sai@27d40000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x27d40000 0x0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI5_8CH>, <&cru HCLK_SAI5_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac2 3>;
+			dma-names = "rx";
+			power-domains = <&power RK3576_PD_VO0>;
+			resets = <&cru SRST_M_SAI5_8CH>, <&cru SRST_H_SAI5_8CH>;
+			reset-names = "m", "h";
+			rockchip,sai-rx-route = <0 1 2 3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI5";
+			status = "disabled";
+		};
+
+		sai6: sai@27d50000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x27d50000 0x0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI6_8CH>, <&cru HCLK_SAI6_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac2 4>, <&dmac2 5>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_VO0>;
+			resets = <&cru SRST_M_SAI6_8CH>, <&cru SRST_H_SAI6_8CH>;
+			reset-names = "m", "h";
+			rockchip,sai-rx-route = <0 1 2 3>;
+			rockchip,sai-tx-route = <0 1 2 3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI6";
+			status = "disabled";
+		};
+
+		dsi: dsi@27d80000 {
+			compatible = "rockchip,rk3576-mipi-dsi2";
+			reg = <0x0 0x27d80000 0x0 0x10000>;
+			interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+			clock-names = "pclk", "sys";
+			power-domains = <&power RK3576_PD_VO0>;
+			resets = <&cru SRST_P_DSIHOST0>;
+			reset-names = "apb";
+			phys = <&mipidcphy PHY_TYPE_DPHY>;
+			phy-names = "dcphy";
+			rockchip,grf = <&vo0_grf>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi_in: port@0 {
+					reg = <0>;
+				};
+
+				dsi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi: hdmi@27da0000 {
+			compatible = "rockchip,rk3576-dw-hdmi-qp";
+			reg = <0x0 0x27da0000 0x0 0x20000>;
+			clocks = <&cru PCLK_HDMITX0>,
+				 <&cru CLK_HDMITX0_EARC>,
+				 <&cru CLK_HDMITX0_REF>,
+				 <&cru MCLK_SAI6_8CH>,
+				 <&cru CLK_HDMITXHDP>,
+				 <&cru HCLK_VO0_ROOT>;
+			clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1";
+			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "avp", "cec", "earc", "main", "hpd";
+			phys = <&hdptxphy>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda>;
+			power-domains = <&power RK3576_PD_VO0>;
+			resets = <&cru SRST_HDMITX0_REF>, <&cru SRST_HDMITXHDP>;
+			reset-names = "ref", "hdp";
+			rockchip,grf = <&ioc_grf>;
+			rockchip,vo-grf = <&vo0_grf>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		sai7: sai@27ed0000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x27ed0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI7_8CH>, <&cru HCLK_SAI7_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac2 19>;
+			dma-names = "tx";
+			power-domains = <&power RK3576_PD_VO1>;
+			resets = <&cru SRST_M_SAI7_8CH>, <&cru SRST_H_SAI7_8CH>;
+			reset-names = "m", "h";
+			rockchip,sai-tx-route = <0 1 2 3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI7";
+			status = "disabled";
+		};
+
+		sai8: sai@27ee0000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x27ee0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI8_8CH>, <&cru HCLK_SAI8_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac1 7>;
+			dma-names = "tx";
+			power-domains = <&power RK3576_PD_VO1>;
+			resets = <&cru SRST_M_SAI8_8CH>, <&cru SRST_H_SAI8_8CH>;
+			reset-names = "m", "h";
+			rockchip,sai-tx-route = <0 1 2 3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI8";
+			status = "disabled";
+		};
+
+		sai9: sai@27ef0000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x27ef0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI9_8CH>, <&cru HCLK_SAI9_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac0 26>;
+			dma-names = "tx";
+			power-domains = <&power RK3576_PD_VO1>;
+			resets = <&cru SRST_M_SAI9_8CH>, <&cru SRST_H_SAI9_8CH>;
+			reset-names = "m", "h";
+			rockchip,sai-tx-route = <0 1 2 3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI9";
+			status = "disabled";
+		};
+
 		qos_hdcp1: qos@27f02000 {
 			compatible = "rockchip,rk3576-qos", "syscon";
 			reg = <0x0 0x27f02000 0x0 0x20>;
@@ -1110,6 +1781,72 @@
 			};
 		};
 
+		sata0: sata@2a240000 {
+			compatible = "rockchip,rk3576-dwc-ahci", "snps,dwc-ahci";
+			reg = <0x0 0x2a240000 0x0 0x1000>;
+			clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+				 <&cru CLK_RXOOB0>;
+			clock-names = "sata", "pmalive", "rxoob";
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3576_PD_SUBPHP>;
+			phys = <&combphy0_ps PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			ports-implemented = <0x1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata1: sata@2a250000 {
+			compatible = "rockchip,rk3576-dwc-ahci", "snps,dwc-ahci";
+			reg = <0x0 0x2a250000 0x0 0x1000>;
+			clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
+				 <&cru CLK_RXOOB1>;
+			clock-names = "sata", "pmalive", "rxoob";
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3576_PD_SUBPHP>;
+			phys = <&combphy1_psu PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			ports-implemented = <0x1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		ufshc: ufshc@2a2d0000 {
+			compatible = "rockchip,rk3576-ufshc";
+			reg = <0x0 0x2a2d0000 0x0 0x10000>,
+			      <0x0 0x2b040000 0x0 0x10000>,
+			      <0x0 0x2601f000 0x0 0x1000>,
+			      <0x0 0x2603c000 0x0 0x1000>,
+			      <0x0 0x2a2e0000 0x0 0x10000>;
+			reg-names = "hci", "mphy", "hci_grf", "mphy_grf", "hci_apb";
+			clocks = <&cru ACLK_UFS_SYS>, <&cru PCLK_USB_ROOT>, <&cru PCLK_MPHY>,
+				 <&cru CLK_REF_UFS_CLKOUT>;
+			clock-names = "core", "pclk", "pclk_mphy", "ref_out";
+			assigned-clocks = <&cru CLK_REF_OSC_MPHY>;
+			assigned-clock-parents = <&cru CLK_REF_MPHY_26M>;
+			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3576_PD_USB>;
+			pinctrl-0 = <&ufs_refclk>;
+			pinctrl-names = "default";
+			resets = <&cru SRST_A_UFS_BIU>, <&cru SRST_A_UFS_SYS>,
+				 <&cru SRST_A_UFS>, <&cru SRST_P_UFS_GRF>;
+			reset-names = "biu", "sys", "ufs", "grf";
+			reset-gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
+			status = "disabled";
+		};
+
+		sfc1: spi@2a300000 {
+			compatible = "rockchip,sfc";
+			reg = <0x0 0x2a300000 0x0 0x4000>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_FSPI1_X2>, <&cru HCLK_FSPI1>;
+			clock-names = "clk_sfc", "hclk_sfc";
+			power-domains = <&power RK3576_PD_SDGMAC>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		sdmmc: mmc@2a310000 {
 			compatible = "rockchip,rk3576-dw-mshc";
 			reg = <0x0 0x2a310000 0x0 0x4000>;
@@ -1126,6 +1863,22 @@
 			status = "disabled";
 		};
 
+		sdio: mmc@2a320000 {
+			compatible = "rockchip,rk3576-dw-mshc";
+			reg = <0x0 0x2a320000 0x0 0x4000>;
+			clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x100>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <200000000>;
+			pinctrl-0 = <&sdmmc1m0_clk &sdmmc1m0_cmd &sdmmc1m0_bus4>;
+			pinctrl-names = "default";
+			power-domains = <&power RK3576_PD_SDGMAC>;
+			resets = <&cru SRST_H_SDIO>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
 		sdhci: mmc@2a330000 {
 			compatible = "rockchip,rk3576-dwcmshc", "rockchip,rk3588-dwcmshc";
 			reg = <0x0 0x2a330000 0x0 0x10000>;
@@ -1149,6 +1902,203 @@
 			status = "disabled";
 		};
 
+		sfc0: spi@2a340000 {
+			compatible = "rockchip,sfc";
+			reg = <0x0 0x2a340000 0x0 0x4000>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_FSPI_X2>, <&cru HCLK_FSPI>;
+			clock-names = "clk_sfc", "hclk_sfc";
+			power-domains = <&power RK3576_PD_NVM>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rng: rng@2a410000 {
+			compatible = "rockchip,rk3576-rng";
+			reg = <0x0 0x2a410000 0x0 0x200>;
+			clocks = <&cru HCLK_TRNG_NS>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&cru SRST_H_TRNG_NS>;
+		};
+
+		otp: otp@2a580000 {
+			compatible = "rockchip,rk3576-otp";
+			reg = <0x0 0x2a580000 0x0 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>,
+				 <&cru CLK_OTP_PHY_G>;
+			clock-names = "otp", "apb_pclk", "phy";
+			resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>;
+			reset-names = "otp", "apb";
+
+			/* Data cells */
+			cpu_code: cpu-code@2 {
+				reg = <0x02 0x2>;
+			};
+			otp_cpu_version: cpu-version@5 {
+				reg = <0x05 0x1>;
+				bits = <3 3>;
+			};
+			otp_id: id@a {
+				reg = <0x0a 0x10>;
+			};
+			cpub_leakage: cpub-leakage@1e {
+				reg = <0x1e 0x1>;
+			};
+			cpul_leakage: cpul-leakage@1f {
+				reg = <0x1f 0x1>;
+			};
+			npu_leakage: npu-leakage@20 {
+				reg = <0x20 0x1>;
+			};
+			gpu_leakage: gpu-leakage@21 {
+				reg = <0x21 0x1>;
+			};
+			log_leakage: log-leakage@22 {
+				reg = <0x22 0x1>;
+			};
+			bigcore_tsadc_trim: bigcore-tsadc-trim@24 {
+				reg = <0x24 0x2>;
+				bits = <0 10>;
+			};
+			litcore_tsadc_trim: litcore-tsadc-trim@26 {
+				reg = <0x26 0x2>;
+				bits = <0 10>;
+			};
+			ddr_tsadc_trim: ddr-tsadc-trim@28 {
+				reg = <0x28 0x2>;
+				bits = <0 10>;
+			};
+			npu_tsadc_trim: npu-tsadc-trim@2a {
+				reg = <0x2a 0x2>;
+				bits = <0 10>;
+			};
+			gpu_tsadc_trim: gpu-tsadc-trim@2c {
+				reg = <0x2c 0x2>;
+				bits = <0 10>;
+			};
+			soc_tsadc_trim: soc-tsadc-trim@64 {
+				reg = <0x64 0x2>;
+				bits = <0 10>;
+			};
+		};
+
+		sai0: sai@2a600000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x2a600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI0_8CH>, <&cru HCLK_SAI0_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac0 0>, <&dmac0 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_AUDIO>;
+			resets = <&cru SRST_M_SAI0_8CH>, <&cru SRST_H_SAI0_8CH>;
+			reset-names = "m", "h";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sai0m0_lrck
+				&sai0m0_sclk
+				&sai0m0_sdi0
+				&sai0m0_sdi1
+				&sai0m0_sdi2
+				&sai0m0_sdi3
+				&sai0m0_sdo0
+				&sai0m0_sdo1
+				&sai0m0_sdo2
+				&sai0m0_sdo3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI0";
+			status = "disabled";
+		};
+
+		sai1: sai@2a610000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x2a610000 0x0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI1_8CH>, <&cru HCLK_SAI1_8CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac0 2>, <&dmac0 3>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_AUDIO>;
+			resets = <&cru SRST_M_SAI1_8CH>, <&cru SRST_H_SAI1_8CH>;
+			reset-names = "m", "h";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sai1m0_lrck
+				&sai1m0_sclk
+				&sai1m0_sdi0
+				&sai1m0_sdo0
+				&sai1m0_sdo1
+				&sai1m0_sdo2
+				&sai1m0_sdo3>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI1";
+			status = "disabled";
+		};
+
+		sai2: sai@2a620000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x2a620000 0x0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI2_2CH>, <&cru HCLK_SAI2_2CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac1 0>, <&dmac1 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_AUDIO>;
+			resets = <&cru SRST_M_SAI2_2CH>, <&cru SRST_H_SAI2_2CH>;
+			reset-names = "m", "h";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sai2m0_lrck
+				&sai2m0_sclk
+				&sai2m0_sdi
+				&sai2m0_sdo>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI2";
+			status = "disabled";
+		};
+
+		sai3: sai@2a630000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x2a630000 0x0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI3_2CH>, <&cru HCLK_SAI3_2CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac1 2>, <&dmac1 3>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_AUDIO>;
+			resets = <&cru SRST_M_SAI3_2CH>, <&cru SRST_H_SAI3_2CH>;
+			reset-names = "m", "h";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sai3m0_lrck
+				&sai3m0_sclk
+				&sai3m0_sdi
+				&sai3m0_sdo>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI3";
+			status = "disabled";
+		};
+
+		sai4: sai@2a640000 {
+			compatible = "rockchip,rk3576-sai";
+			reg = <0x0 0x2a640000 0x0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru MCLK_SAI4_2CH>, <&cru HCLK_SAI4_2CH>;
+			clock-names = "mclk", "hclk";
+			dmas = <&dmac2 0>, <&dmac2 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&power RK3576_PD_AUDIO>;
+			resets = <&cru SRST_M_SAI4_2CH>, <&cru SRST_H_SAI4_2CH>;
+			reset-names = "m", "h";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sai4m0_lrck
+				&sai4m0_sclk
+				&sai4m0_sdi
+				&sai4m0_sdo>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SAI4";
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@2a701000 {
 			compatible = "arm,gic-400";
 			reg = <0x0 0x2a701000 0 0x10000>,
@@ -1260,7 +2210,6 @@
 			status = "disabled";
 		};
 
-
 		i2c6: i2c@2ac90000 {
 			compatible = "rockchip,rk3576-i2c", "rockchip,rk3399-i2c";
 			reg = <0x0 0x2ac90000 0x0 0x1000>;
@@ -1314,7 +2263,6 @@
 			clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>;
 			clock-names = "tclk", "pclk";
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
 		};
 
 		spi0: spi@2acf0000 {
@@ -1544,6 +2492,55 @@
 			status = "disabled";
 		};
 
+		tsadc: tsadc@2ae70000 {
+			compatible = "rockchip,rk3576-tsadc";
+			reg = <0x0 0x2ae70000 0x0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+			clock-names = "tsadc", "apb_pclk";
+			assigned-clocks = <&cru CLK_TSADC>;
+			assigned-clock-rates = <2000000>;
+			resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
+			reset-names = "tsadc-apb", "tsadc";
+			#thermal-sensor-cells = <1>;
+			rockchip,hw-tshut-temp = <120000>;
+			rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+			rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sensor@0 {
+				reg = <0>;
+				nvmem-cells = <&soc_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@1 {
+				reg = <1>;
+				nvmem-cells = <&bigcore_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@2 {
+				reg = <2>;
+				nvmem-cells = <&litcore_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@3 {
+				reg = <3>;
+				nvmem-cells = <&ddr_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@4 {
+				reg = <4>;
+				nvmem-cells = <&npu_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@5 {
+				reg = <5>;
+				nvmem-cells = <&gpu_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+		};
+
 		i2c9: i2c@2ae80000 {
 			compatible = "rockchip,rk3576-i2c", "rockchip,rk3399-i2c";
 			reg = <0x0 0x2ae80000 0x0 0x1000>;
@@ -1552,8 +2549,6 @@
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c9m0_xfer>;
-			resets = <&cru SRST_I2C9>, <&cru SRST_P_I2C9>;
-			reset-names = "i2c", "apb";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -1587,6 +2582,94 @@
 			status = "disabled";
 		};
 
+		mipidcphy: phy@2b020000 {
+			compatible = "rockchip,rk3576-mipi-dcphy";
+			reg = <0x0 0x2b020000 0x0 0x10000>;
+			clocks = <&cru PCLK_MIPI_DCPHY>,
+				 <&cru CLK_PHY_REF_SRC>;
+			clock-names = "pclk", "ref";
+			resets = <&cru SRST_M_MIPI_DCPHY>,
+				 <&cru SRST_P_MIPI_DCPHY>,
+				 <&cru SRST_P_DCPHY_GRF>,
+				 <&cru SRST_S_MIPI_DCPHY>;
+			reset-names = "m_phy", "apb", "grf", "s_phy";
+			rockchip,grf = <&mipidcphy_grf>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		combphy0_ps: phy@2b050000 {
+			compatible = "rockchip,rk3576-naneng-combphy";
+			reg = <0x0 0x2b050000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&cru CLK_REF_PCIE0_PHY>,
+				 <&cru PCLK_PCIE2_COMBOPHY0>,
+				 <&cru PCLK_PCIE0>;
+			clock-names = "ref", "apb", "pipe";
+			assigned-clocks = <&cru CLK_REF_PCIE0_PHY>;
+			assigned-clock-rates = <100000000>;
+			resets = <&cru SRST_PCIE0_PIPE_PHY>,
+				 <&cru SRST_P_PCIE2_COMBOPHY0>;
+			reset-names = "phy", "apb";
+			rockchip,pipe-grf = <&php_grf>;
+			rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
+			status = "disabled";
+		};
+
+		combphy1_psu: phy@2b060000 {
+			compatible = "rockchip,rk3576-naneng-combphy";
+			reg = <0x0 0x2b060000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&cru CLK_REF_PCIE1_PHY>,
+				 <&cru PCLK_PCIE2_COMBOPHY1>,
+				 <&cru PCLK_PCIE1>;
+			clock-names = "ref", "apb", "pipe";
+			assigned-clocks = <&cru CLK_REF_PCIE1_PHY>;
+			assigned-clock-rates = <100000000>;
+			resets = <&cru SRST_PCIE1_PIPE_PHY>,
+				 <&cru SRST_P_PCIE2_COMBOPHY1>;
+			reset-names = "phy", "apb";
+			rockchip,pipe-grf = <&php_grf>;
+			rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
+			status = "disabled";
+		};
+
+		usbdp_phy: phy@2b010000 {
+			compatible = "rockchip,rk3576-usbdp-phy";
+			reg = <0x0 0x2b010000 0x0 0x10000>;
+			#phy-cells = <1>;
+			clocks = <&cru CLK_PHY_REF_SRC >,
+				 <&cru CLK_USBDP_COMBO_PHY_IMMORTAL>,
+				 <&cru PCLK_USBDPPHY>,
+				 <&u2phy0>;
+			clock-names = "refclk", "immortal", "pclk", "utmi";
+			resets = <&cru SRST_USBDP_COMBO_PHY_INIT>,
+				 <&cru SRST_USBDP_COMBO_PHY_CMN>,
+				 <&cru SRST_USBDP_COMBO_PHY_LANE>,
+				 <&cru SRST_USBDP_COMBO_PHY_PCS>,
+				 <&cru SRST_P_USBDPPHY>;
+			reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+			rockchip,u2phy-grf = <&usb2phy_grf>;
+			rockchip,usb-grf = <&usb_grf>;
+			rockchip,usbdpphy-grf = <&usbdpphy_grf>;
+			rockchip,vo-grf = <&vo1_grf>;
+			status = "disabled";
+		};
+
+		hdptxphy: hdmiphy@2b000000 {
+			compatible = "rockchip,rk3576-hdptx-phy", "rockchip,rk3588-hdptx-phy";
+			reg = <0x0 0x2b000000 0x0 0x2000>;
+			clocks = <&cru CLK_PHY_REF_SRC>, <&cru PCLK_HDPTX_APB>;
+			clock-names = "ref", "apb";
+			#clock-cells = <0>;
+			resets = <&cru SRST_P_HDPTX_APB>, <&cru SRST_HDPTX_INIT>,
+				 <&cru SRST_HDPTX_CMN>, <&cru SRST_HDPTX_LANE>;
+			reset-names = "apb", "init", "cmn", "lane";
+			rockchip,grf = <&hdptxphy_grf>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		sram: sram@3ff88000 {
 			compatible = "mmio-sram";
 			reg = <0x0 0x3ff88000 0x0 0x78000>;
@@ -1604,74 +2687,6 @@
 			compatible = "arm,scmi-shmem";
 			reg = <0x0 0x4010f000 0x0 0x100>;
 		};
-
-		pinctrl: pinctrl {
-			compatible = "rockchip,rk3576-pinctrl";
-			rockchip,grf = <&ioc_grf>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			gpio0: gpio@27320000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0x27320000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 0 32>;
-				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-			};
-
-			gpio1: gpio@2ae10000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0x2ae10000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 32 32>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@2ae20000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0x2ae20000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 64 32>;
-				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@2ae30000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0x2ae30000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 96 32>;
-				interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@2ae40000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0x2ae40000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
-				gpio-controller;
-				gpio-ranges = <&pinctrl 0 128 32>;
-				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-			};
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts b/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts
new file mode 100644
index 000000000000..854c118418eb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts
@@ -0,0 +1,734 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Radxa E52C";
+	compatible = "radxa,e52c", "rockchip,rk3582", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <18000>;
+		poll-interval = <100>;
+
+		button-0 {
+			label = "Maskrom";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	keys-1 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm15_ir_m1>;
+
+		button-1 {
+			label = "User";
+			gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			wakeup-source;
+		};
+	};
+
+	leds-0 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_led>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	leds-1 {
+		compatible = "pwm-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_LAN;
+			linux,default-trigger = "netdev";
+			pwms = <&pwm14 0 1000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_WAN;
+			linux,default-trigger = "netdev";
+			pwms = <&pwm11 0 1000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+	};
+
+	vcc_1v1_nldo_s3: regulator-1v1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vcc_3v3_s0: regulator-3v3-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcca: regulator-4v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vcc5v0_usb_otg0: regulator-5v0-0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren_h>;
+		regulator-name = "vcc5v0_usb_otg0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vcc_5v0: regulator-5v0-1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_5v0_pwren_h>;
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+	};
+
+	vcc_sysin: regulator-5v0-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sysin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+/*
+ * In the Rockchip RK3582 SoC, some CPU cores end up disabled
+ * and unused because they're marked in the efuses as defective.
+ * The disabling in the DT is performed by the boot loader.
+ */
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v3_pmu>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5m2_xfer>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int_l>;
+		wakeup-source;
+	};
+};
+
+&pcie2x1l1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20x1_1_perstn_m1>;
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20x1_2_perstn_m0>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
+	status = "okay";
+};
+
+&pinctrl {
+	keys {
+		pwm15_ir_m1: pwm15-ir-m1 {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie20x1_1_perstn_m1: pcie-1 {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie20x1_2_perstn_m0: pcie-2 {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	regulators {
+		vcc_5v0_pwren_h: vcc-5v0-pwren-h {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtc {
+		rtc_int_l: rtc-int-l {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_otg_pwren_h: usb-otg-pwren-h {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm11 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm11m1_pins>;
+	status = "okay";
+};
+
+&pwm14 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm14m1_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3_s0>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-sdio;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc_sysin>;
+		vcc2-supply = <&vcc_sysin>;
+		vcc3-supply = <&vcc_sysin>;
+		vcc4-supply = <&vcc_sysin>;
+		vcc5-supply = <&vcc_sysin>;
+		vcc6-supply = <&vcc_sysin>;
+		vcc7-supply = <&vcc_sysin>;
+		vcc8-supply = <&vcc_sysin>;
+		vcc9-supply = <&vcc_sysin>;
+		vcc10-supply = <&vcc_sysin>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_sysin>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcca>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg3 {
+				regulator-name = "vdd_logic_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vcc_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: vcc_3v3_pmu: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg1 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg2 {
+				regulator-name = "vcca_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-name = "vdda_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-name = "vcca_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg3 {
+				regulator-name = "vdda_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-name = "vdda_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg0>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-lm7.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-armsom-lm7.dtsi
index a3138d2d384c..e44125e9a8fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-lm7.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-lm7.dtsi
@@ -114,6 +114,10 @@
 	};
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &saradc {
 	vref-supply = <&avcc_1v8_s0>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts
index 08f09053a066..39197ee19837 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588.dtsi"
 
 / {
@@ -33,6 +34,17 @@
 			  "Headphone", "Headphones";
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -164,6 +176,30 @@
 	status = "okay";
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -258,6 +294,10 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 /* phy1 - right ethernet port */
 &pcie2x1l0 {
 	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
@@ -268,6 +308,22 @@
 &pcie2x1l1 {
 	reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
 	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x300000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+		bus-range = <0x30 0x3f>;
+
+		wifi: wifi@0,0 {
+			compatible = "pci14e4,449d";
+			reg = <0x310000 0 0 0 0>;
+			clocks = <&hym8563>;
+			clock-names = "lpo";
+		};
+	};
 };
 
 /* phy0 - left ethernet port */
@@ -286,6 +342,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	hym8563 {
 		hym8563_int: hym8563-int {
@@ -313,6 +373,20 @@
 			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	wireless-bluetooth {
+		bt_reset_pin: bt-reset-pin {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_pin: bt-wake-pin {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_host_irq: bt-wake-host-irq {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
 };
 
 &pwm1 {
@@ -707,6 +781,28 @@
 	status = "okay";
 };
 
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&hym8563>;
+		clock-names = "lpo";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+		device-wakeup-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_wake_host_irq &bt_wake_pin &bt_reset_pin>;
+		vbat-supply = <&vcc_3v3_s3>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
+};
+
 &usbdp_phy1 {
 	status = "okay";
 };
@@ -723,3 +819,18 @@
 	dr_mode = "host";
 	status = "okay";
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
index 779cd1b1798c..6ad2759ddcca 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588-armsom-lm7.dtsi"
 
 / {
@@ -32,6 +33,28 @@
 		pinctrl-0 = <&hp_detect>;
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -138,6 +161,54 @@
 	status = "okay";
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
 &i2c6 {
 	status = "okay";
 
@@ -192,6 +263,14 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
 &package_thermal {
 	polling-delay = <1000>;
 
@@ -406,3 +485,25 @@
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
index 7f874c77410c..6584d73660f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
@@ -578,14 +578,14 @@
 		hdmim0_tx0_scl: hdmim0-tx0-scl {
 			rockchip,pins =
 				/* hdmim0_tx0_scl */
-				<4 RK_PB7 5 &pcfg_pull_none>;
+				<4 RK_PB7 5 &pcfg_pull_none_drv_level_5_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim0_tx0_sda: hdmim0-tx0-sda {
 			rockchip,pins =
 				/* hdmim0_tx0_sda */
-				<4 RK_PC0 5 &pcfg_pull_none>;
+				<4 RK_PC0 5 &pcfg_pull_none_drv_level_1_smt>;
 		};
 
 		/omit-if-no-ref/
@@ -640,14 +640,14 @@
 		hdmim1_tx0_scl: hdmim1-tx0-scl {
 			rockchip,pins =
 				/* hdmim1_tx0_scl */
-				<0 RK_PD5 11 &pcfg_pull_none>;
+				<0 RK_PD5 11 &pcfg_pull_none_drv_level_5_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim1_tx0_sda: hdmim1-tx0-sda {
 			rockchip,pins =
 				/* hdmim1_tx0_sda */
-				<0 RK_PD4 11 &pcfg_pull_none>;
+				<0 RK_PD4 11 &pcfg_pull_none_drv_level_1_smt>;
 		};
 
 		/omit-if-no-ref/
@@ -668,14 +668,14 @@
 		hdmim1_tx1_scl: hdmim1-tx1-scl {
 			rockchip,pins =
 				/* hdmim1_tx1_scl */
-				<3 RK_PC6 5 &pcfg_pull_none>;
+				<3 RK_PC6 5 &pcfg_pull_none_drv_level_5_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim1_tx1_sda: hdmim1-tx1-sda {
 			rockchip,pins =
 				/* hdmim1_tx1_sda */
-				<3 RK_PC5 5 &pcfg_pull_none>;
+				<3 RK_PC5 5 &pcfg_pull_none_drv_level_1_smt>;
 		};
 		/omit-if-no-ref/
 		hdmim2_rx_cec: hdmim2-rx-cec {
@@ -709,14 +709,14 @@
 		hdmim2_tx0_scl: hdmim2-tx0-scl {
 			rockchip,pins =
 				/* hdmim2_tx0_scl */
-				<3 RK_PC7 5 &pcfg_pull_none>;
+				<3 RK_PC7 5 &pcfg_pull_none_drv_level_5_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim2_tx0_sda: hdmim2-tx0-sda {
 			rockchip,pins =
 				/* hdmim2_tx0_sda */
-				<3 RK_PD0 5 &pcfg_pull_none>;
+				<3 RK_PD0 5 &pcfg_pull_none_drv_level_1_smt>;
 		};
 
 		/omit-if-no-ref/
@@ -730,14 +730,14 @@
 		hdmim2_tx1_scl: hdmim2-tx1-scl {
 			rockchip,pins =
 				/* hdmim2_tx1_scl */
-				<1 RK_PA4 5 &pcfg_pull_none>;
+				<1 RK_PA4 5 &pcfg_pull_none_drv_level_5_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim2_tx1_sda: hdmim2-tx1-sda {
 			rockchip,pins =
 				/* hdmim2_tx1_sda */
-				<1 RK_PA3 5 &pcfg_pull_none>;
+				<1 RK_PA3 5 &pcfg_pull_none_drv_level_1_smt>;
 		};
 
 		/omit-if-no-ref/
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index a337f3fb8377..2a7921793020 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/rockchip,rk3588-cru.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/rk3588-power.h>
 #include <dt-bindings/reset/rockchip,rk3588-cru.h>
 #include <dt-bindings/phy/phy.h>
@@ -95,8 +96,6 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <530>;
 			clocks = <&scmi_clk SCMI_CLK_CPUL>;
-			assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
-			assigned-clock-rates = <816000000>;
 			cpu-idle-states = <&CPU_SLEEP>;
 			i-cache-size = <32768>;
 			i-cache-line-size = <64>;
@@ -173,8 +172,6 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			clocks = <&scmi_clk SCMI_CLK_CPUB01>;
-			assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
-			assigned-clock-rates = <816000000>;
 			cpu-idle-states = <&CPU_SLEEP>;
 			i-cache-size = <65536>;
 			i-cache-line-size = <64>;
@@ -213,8 +210,6 @@
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			clocks = <&scmi_clk SCMI_CLK_CPUB23>;
-			assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
-			assigned-clock-rates = <816000000>;
 			cpu-idle-states = <&CPU_SLEEP>;
 			i-cache-size = <65536>;
 			i-cache-line-size = <64>;
@@ -358,11 +353,6 @@
 	};
 
 	firmware {
-		optee: optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-		};
-
 		scmi: scmi {
 			compatible = "arm,scmi-smc";
 			arm,smc-id = <0x82000010>;
@@ -382,6 +372,22 @@
 		};
 	};
 
+	hdmi0_sound: hdmi0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,name = "hdmi0";
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi0>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s5_8ch>;
+		};
+	};
+
 	pmu-a55 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>;
@@ -428,16 +434,15 @@
 		#clock-cells = <0>;
 	};
 
-	pmu_sram: sram@10f000 {
-		compatible = "mmio-sram";
-		reg = <0x0 0x0010f000 0x0 0x100>;
-		ranges = <0 0x0 0x0010f000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-		scmi_shmem: sram@0 {
+		scmi_shmem: shmem@10f000 {
 			compatible = "arm,scmi-shmem";
-			reg = <0x0 0x100>;
+			reg = <0x0 0x0010f000 0x0 0x100>;
+			no-map;
 		};
 	};
 
@@ -549,22 +554,21 @@
 	mmu600_pcie: iommu@fc900000 {
 		compatible = "arm,smmu-v3";
 		reg = <0x0 0xfc900000 0x0 0x200000>;
-		interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupts = <GIC_SPI 369 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 374 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING 0>;
 		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
 		#iommu-cells = <1>;
-		status = "disabled";
 	};
 
 	mmu600_php: iommu@fcb00000 {
 		compatible = "arm,smmu-v3";
 		reg = <0x0 0xfcb00000 0x0 0x200000>;
-		interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupts = <GIC_SPI 381 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 383 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 386 IRQ_TYPE_EDGE_RISING 0>,
+			     <GIC_SPI 379 IRQ_TYPE_EDGE_RISING 0>;
 		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
 		#iommu-cells = <1>;
 		status = "disabled";
@@ -580,6 +584,16 @@
 		reg = <0x0 0xfd58c000 0x0 0x1000>;
 	};
 
+	mipidcphy0_grf: syscon@fd5e8000 {
+		compatible = "rockchip,rk3588-dcphy-grf", "syscon";
+		reg = <0x0 0xfd5e8000 0x0 0x4000>;
+	};
+
+	mipidcphy1_grf: syscon@fd5ec000 {
+		compatible = "rockchip,rk3588-dcphy-grf", "syscon";
+		reg = <0x0 0xfd5ec000 0x0 0x4000>;
+	};
+
 	vop_grf: syscon@fd5a4000 {
 		compatible = "rockchip,rk3588-vop-grf", "syscon";
 		reg = <0x0 0xfd5a4000 0x0 0x2000>;
@@ -607,6 +621,16 @@
 		reg = <0x0 0xfd5b0000 0x0 0x1000>;
 	};
 
+	csidphy0_grf: syscon@fd5b4000 {
+		compatible = "rockchip,rk3588-csidphy-grf", "syscon";
+		reg = <0x0 0xfd5b4000 0x0 0x1000>;
+	};
+
+	csidphy1_grf: syscon@fd5b5000 {
+		compatible = "rockchip,rk3588-csidphy-grf", "syscon";
+		reg = <0x0 0xfd5b5000 0x0 0x1000>;
+	};
+
 	pipe_phy0_grf: syscon@fd5bc000 {
 		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
 		reg = <0x0 0xfd5bc000 0x0 0x100>;
@@ -827,7 +851,7 @@
 			status = "okay";
 
 			/* These power domains are grouped by VD_NPU */
-			power-domain@RK3588_PD_NPU {
+			pd_npu: power-domain@RK3588_PD_NPU {
 				reg = <RK3588_PD_NPU>;
 				#power-domain-cells = <0>;
 				#address-cells = <1>;
@@ -865,7 +889,7 @@
 				};
 			};
 			/* These power domains are grouped by VD_GPU */
-			power-domain@RK3588_PD_GPU {
+			pd_gpu: power-domain@RK3588_PD_GPU {
 				reg = <RK3588_PD_GPU>;
 				clocks = <&cru CLK_GPU>,
 					 <&cru CLK_GPU_COREGROUP>,
@@ -1126,6 +1150,97 @@
 		};
 	};
 
+	rknn_core_0: npu@fdab0000 {
+		compatible = "rockchip,rk3588-rknn-core";
+		reg = <0x0 0xfdab0000 0x0 0x1000>,
+		      <0x0 0xfdab1000 0x0 0x1000>,
+		      <0x0 0xfdab3000 0x0 0x1000>;
+		reg-names = "pc", "cna", "core";
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU0>, <&cru HCLK_NPU0>,
+			 <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_ROOT>;
+		clock-names = "aclk", "hclk", "npu", "pclk";
+		assigned-clocks = <&scmi_clk SCMI_CLK_NPU>;
+		assigned-clock-rates = <200000000>;
+		resets = <&cru SRST_A_RKNN0>, <&cru SRST_H_RKNN0>;
+		reset-names = "srst_a", "srst_h";
+		power-domains = <&power RK3588_PD_NPUTOP>;
+		iommus = <&rknn_mmu_0>;
+		status = "disabled";
+	};
+
+	rknn_mmu_0: iommu@fdab9000 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdab9000 0x0 0x100>,
+		      <0x0 0xfdaba000 0x0 0x100>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU0>, <&cru HCLK_NPU0>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_NPUTOP>;
+		status = "disabled";
+	};
+
+	rknn_core_1: npu@fdac0000 {
+		compatible = "rockchip,rk3588-rknn-core";
+		reg = <0x0 0xfdac0000 0x0 0x1000>,
+		      <0x0 0xfdac1000 0x0 0x1000>,
+		      <0x0 0xfdac3000 0x0 0x1000>;
+		reg-names = "pc", "cna", "core";
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU1>, <&cru HCLK_NPU1>,
+			 <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_ROOT>;
+		clock-names = "aclk", "hclk", "npu", "pclk";
+		assigned-clocks = <&scmi_clk SCMI_CLK_NPU>;
+		assigned-clock-rates = <200000000>;
+		resets = <&cru SRST_A_RKNN1>, <&cru SRST_H_RKNN1>;
+		reset-names = "srst_a", "srst_h";
+		power-domains = <&power RK3588_PD_NPU1>;
+		iommus = <&rknn_mmu_1>;
+		status = "disabled";
+	};
+
+	rknn_mmu_1: iommu@fdac9000 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdaca000 0x0 0x100>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU1>, <&cru HCLK_NPU1>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_NPU1>;
+		status = "disabled";
+	};
+
+	rknn_core_2: npu@fdad0000 {
+		compatible = "rockchip,rk3588-rknn-core";
+		reg = <0x0 0xfdad0000 0x0 0x1000>,
+		      <0x0 0xfdad1000 0x0 0x1000>,
+		      <0x0 0xfdad3000 0x0 0x1000>;
+		reg-names = "pc", "cna", "core";
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU2>, <&cru HCLK_NPU2>,
+			 <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_ROOT>;
+		clock-names = "aclk", "hclk", "npu", "pclk";
+		assigned-clocks = <&scmi_clk SCMI_CLK_NPU>;
+		assigned-clock-rates = <200000000>;
+		resets = <&cru SRST_A_RKNN2>, <&cru SRST_H_RKNN2>;
+		reset-names = "srst_a", "srst_h";
+		power-domains = <&power RK3588_PD_NPU2>;
+		iommus = <&rknn_mmu_2>;
+		status = "disabled";
+	};
+
+	rknn_mmu_2: iommu@fdad9000 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdada000 0x0 0x100>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU2>, <&cru HCLK_NPU2>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_NPU2>;
+		status = "disabled";
+	};
+
 	vpu121: video-codec@fdb50000 {
 		compatible = "rockchip,rk3588-vpu121", "rockchip,rk3568-vpu";
 		reg = <0x0 0xfdb50000 0x0 0x800>;
@@ -1262,14 +1377,16 @@
 			 <&cru DCLK_VOP1>,
 			 <&cru DCLK_VOP2>,
 			 <&cru DCLK_VOP3>,
-			 <&cru PCLK_VOP_ROOT>;
+			 <&cru PCLK_VOP_ROOT>,
+			 <&hdptxphy0>;
 		clock-names = "aclk",
 			      "hclk",
 			      "dclk_vp0",
 			      "dclk_vp1",
 			      "dclk_vp2",
 			      "dclk_vp3",
-			      "pclk_vop";
+			      "pclk_vop",
+			      "pll_hdmiphy0";
 		iommus = <&vop_mmu>;
 		power-domains = <&power RK3588_PD_VOP>;
 		rockchip,grf = <&sys_grf>;
@@ -1319,6 +1436,21 @@
 		status = "disabled";
 	};
 
+	spdif_tx2: spdif-tx@fddb0000 {
+		compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif";
+		reg = <0x0 0xfddb0000 0x0 0x1000>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		assigned-clocks = <&cru CLK_SPDIF2_DP0_SRC>;
+		clock-names = "mclk", "hclk";
+		clocks = <&cru MCLK_SPDIF2>, <&cru HCLK_SPDIF2_DP0>;
+		dma-names = "tx";
+		dmas = <&dmac1 6>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+		power-domains = <&power RK3588_PD_VO0>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	i2s4_8ch: i2s@fddc0000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfddc0000 0x0 0x1000>;
@@ -1336,6 +1468,21 @@
 		status = "disabled";
 	};
 
+	spdif_tx3: spdif-tx@fdde0000 {
+		compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif";
+		reg = <0x0 0xfdde0000 0x0 0x1000>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		assigned-clocks = <&cru CLK_SPDIF3_SRC>;
+		clock-names = "mclk", "hclk";
+		clocks = <&cru MCLK_SPDIF3>, <&cru HCLK_SPDIF3>;
+		dma-names = "tx";
+		dmas = <&dmac1 7>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+		power-domains = <&power RK3588_PD_VO1>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	i2s5_8ch: i2s@fddf0000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfddf0000 0x0 0x1000>;
@@ -1370,6 +1517,92 @@
 		status = "disabled";
 	};
 
+	dsi0: dsi@fde20000 {
+		compatible = "rockchip,rk3588-mipi-dsi2";
+		reg = <0x0 0xfde20000 0x0 0x10000>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+		clock-names = "pclk", "sys";
+		resets = <&cru SRST_P_DSIHOST0>;
+		reset-names = "apb";
+		power-domains = <&power RK3588_PD_VOP>;
+		phys = <&mipidcphy0 PHY_TYPE_DPHY>;
+		phy-names = "dcphy";
+		rockchip,grf = <&vop_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi0_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	dsi1: dsi@fde30000 {
+		compatible = "rockchip,rk3588-mipi-dsi2";
+		reg = <0x0 0xfde30000 0x0 0x10000>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_DSIHOST1>, <&cru CLK_DSIHOST1>;
+		clock-names = "pclk", "sys";
+		resets = <&cru SRST_P_DSIHOST1>;
+		reset-names = "apb";
+		power-domains = <&power RK3588_PD_VOP>;
+		phys = <&mipidcphy1 PHY_TYPE_DPHY>;
+		phy-names = "dcphy";
+		rockchip,grf = <&vop_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi1_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	dp0: dp@fde50000 {
+		compatible = "rockchip,rk3588-dp";
+		reg = <0x0 0xfde50000 0x0 0x4000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru CLK_AUX16M_0>;
+		assigned-clock-rates = <16000000>;
+		clocks = <&cru PCLK_DP0>, <&cru CLK_AUX16M_0>,
+			 <&cru CLK_DP0>, <&cru MCLK_I2S4_8CH_TX>,
+			 <&cru MCLK_SPDIF2_DP0>;
+		clock-names = "apb", "aux", "hdcp", "i2s", "spdif";
+		phys = <&usbdp_phy0 PHY_TYPE_DP>;
+		power-domains = <&power RK3588_PD_VO0>;
+		resets = <&cru SRST_DP0>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dp0_in: port@0 {
+				reg = <0>;
+			};
+
+			dp0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	hdmi0: hdmi@fde80000 {
 		compatible = "rockchip,rk3588-dw-hdmi-qp";
 		reg = <0x0 0xfde80000 0x0 0x20000>;
@@ -1386,7 +1619,7 @@
 			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "avp", "cec", "earc", "main", "hpd";
-		phys = <&hdptxphy_hdmi0>;
+		phys = <&hdptxphy0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd
 			     &hdmim0_tx0_scl &hdmim0_tx0_sda>;
@@ -1395,6 +1628,7 @@
 		reset-names = "ref", "hdp";
 		rockchip,grf = <&sys_grf>;
 		rockchip,vo-grf = <&vo1_grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
@@ -1411,6 +1645,34 @@
 		};
 	};
 
+	edp0: edp@fdec0000 {
+		compatible = "rockchip,rk3588-edp";
+		reg = <0x0 0xfdec0000 0x0 0x1000>;
+		clocks = <&cru CLK_EDP0_24M>, <&cru PCLK_EDP0>;
+		clock-names = "dp", "pclk";
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
+		phys = <&hdptxphy0>;
+		phy-names = "dp";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_EDP0_24M>, <&cru SRST_P_EDP0>;
+		reset-names = "dp", "apb";
+		rockchip,grf = <&vo1_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp0_in: port@0 {
+				reg = <0>;
+			};
+
+			edp0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	qos_gpu_m0: qos@fdf35000 {
 		compatible = "rockchip,rk3588-qos", "syscon";
 		reg = <0x0 0xfdf35000 0x0 0x20>;
@@ -1686,6 +1948,7 @@
 		linux,pci-domain = <3>;
 		max-link-speed = <2>;
 		msi-map = <0x3000 &its0 0x3000 0x1000>;
+		iommu-map = <0x3000 &mmu600_pcie 0x3000 0x1000>;
 		num-lanes = <1>;
 		phys = <&combphy2_psu PHY_TYPE_PCIE>;
 		phy-names = "pcie-phy";
@@ -1737,6 +2000,7 @@
 		linux,pci-domain = <4>;
 		max-link-speed = <2>;
 		msi-map = <0x4000 &its0 0x4000 0x1000>;
+		iommu-map = <0x4000 &mmu600_pcie 0x4000 0x1000>;
 		num-lanes = <1>;
 		phys = <&combphy0_ps PHY_TYPE_PCIE>;
 		phy-names = "pcie-phy";
@@ -1917,9 +2181,18 @@
 			 <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
 			 <&cru SRST_T_EMMC>;
 		reset-names = "core", "bus", "axi", "block", "timer";
+		supports-cqe;
 		status = "disabled";
 	};
 
+	rng@fe378000 {
+		compatible = "rockchip,rk3588-rng";
+		reg = <0x0 0xfe378000 0x0 0x200>;
+		interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&scmi_clk SCMI_HCLK_SECURE_NS>;
+		resets = <&scmi_reset SCMI_SRST_H_TRNG_NS>;
+	};
+
 	i2s0_8ch: i2s@fe470000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfe470000 0x0 0x1000>;
@@ -2015,12 +2288,47 @@
 		status = "disabled";
 	};
 
+	spdif_tx0: spdif-tx@fe4e0000 {
+		compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif";
+		reg = <0x0 0xfe4e0000 0x0 0x1000>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		assigned-clocks = <&cru CLK_SPDIF0_SRC>;
+		clock-names = "mclk", "hclk";
+		clocks = <&cru MCLK_SPDIF0>, <&cru HCLK_SPDIF0>;
+		dma-names = "tx";
+		dmas = <&dmac0 5>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&spdif0m0_tx>;
+		pinctrl-names = "default";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	spdif_tx1: spdif-tx@fe4f0000 {
+		compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif";
+		reg = <0x0 0xfe4f0000 0x0 0x1000>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		assigned-clocks = <&cru CLK_SPDIF1_SRC>;
+		clock-names = "mclk", "hclk";
+		clocks = <&cru MCLK_SPDIF1>, <&cru HCLK_SPDIF1>;
+		dma-names = "tx";
+		dmas = <&dmac1 5>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&spdif1m0_tx>;
+		pinctrl-names = "default";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	gic: interrupt-controller@fe600000 {
 		compatible = "arm,gic-v3";
 		reg = <0x0 0xfe600000 0 0x10000>, /* GICD */
 		      <0x0 0xfe680000 0 0x100000>; /* GICR */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-controller;
+		dma-noncoherent;
 		mbi-alias = <0x0 0xfe610000>;
 		mbi-ranges = <424 56>;
 		msi-controller;
@@ -2032,6 +2340,7 @@
 		its0: msi-controller@fe640000 {
 			compatible = "arm,gic-v3-its";
 			reg = <0x0 0xfe640000 0x0 0x20000>;
+			dma-noncoherent;
 			msi-controller;
 			#msi-cells = <1>;
 		};
@@ -2039,6 +2348,7 @@
 		its1: msi-controller@fe660000 {
 			compatible = "arm,gic-v3-its";
 			reg = <0x0 0xfe660000 0x0 0x20000>;
+			dma-noncoherent;
 			msi-controller;
 			#msi-cells = <1>;
 		};
@@ -2667,9 +2977,9 @@
 		rockchip,hw-tshut-temp = <120000>;
 		rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
 		rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
-		pinctrl-0 = <&tsadc_gpio_func>;
-		pinctrl-1 = <&tsadc_shut>;
-		pinctrl-names = "gpio", "otpout";
+		pinctrl-0 = <&tsadc_shut_org>;
+		pinctrl-1 = <&tsadc_gpio_func>;
+		pinctrl-names = "default", "sleep";
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
@@ -2806,11 +3116,12 @@
 		#dma-cells = <1>;
 	};
 
-	hdptxphy_hdmi0: phy@fed60000 {
+	hdptxphy0: phy@fed60000 {
 		compatible = "rockchip,rk3588-hdptx-phy";
 		reg = <0x0 0xfed60000 0x0 0x2000>;
 		clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>;
 		clock-names = "ref", "apb";
+		#clock-cells = <0>;
 		#phy-cells = <0>;
 		resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>,
 			 <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>,
@@ -2844,6 +3155,62 @@
 		status = "disabled";
 	};
 
+	mipidcphy0: phy@feda0000 {
+		compatible = "rockchip,rk3588-mipi-dcphy";
+		reg = <0x0 0xfeda0000 0x0 0x10000>;
+		rockchip,grf = <&mipidcphy0_grf>;
+		clocks = <&cru PCLK_MIPI_DCPHY0>,
+			 <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>;
+		clock-names = "pclk", "ref";
+		resets = <&cru SRST_M_MIPI_DCPHY0>,
+			 <&cru SRST_P_MIPI_DCPHY0>,
+			 <&cru SRST_P_MIPI_DCPHY0_GRF>,
+			 <&cru SRST_S_MIPI_DCPHY0>;
+		reset-names = "m_phy", "apb", "grf", "s_phy";
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	mipidcphy1: phy@fedb0000 {
+		compatible = "rockchip,rk3588-mipi-dcphy";
+		reg = <0x0 0xfedb0000 0x0 0x10000>;
+		rockchip,grf = <&mipidcphy1_grf>;
+		clocks = <&cru PCLK_MIPI_DCPHY1>,
+			 <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>;
+		clock-names = "pclk", "ref";
+		resets = <&cru SRST_M_MIPI_DCPHY1>,
+			 <&cru SRST_P_MIPI_DCPHY1>,
+			 <&cru SRST_P_MIPI_DCPHY1_GRF>,
+			 <&cru SRST_S_MIPI_DCPHY1>;
+		reset-names = "m_phy", "apb", "grf", "s_phy";
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	csi_dphy0: phy@fedc0000 {
+		compatible = "rockchip,rk3588-csi-dphy";
+		reg = <0x0 0xfedc0000 0x0 0x8000>;
+		clocks = <&cru PCLK_CSIPHY0>;
+		clock-names = "pclk";
+		#phy-cells = <0>;
+		resets = <&cru SRST_P_CSIPHY0>, <&cru SRST_CSIPHY0>;
+		reset-names = "apb", "phy";
+		rockchip,grf = <&csidphy0_grf>;
+		status = "disabled";
+	};
+
+	csi_dphy1: phy@fedc8000 {
+		compatible = "rockchip,rk3588-csi-dphy";
+		reg = <0x0 0xfedc8000 0x0 0x8000>;
+		clocks = <&cru PCLK_CSIPHY1>;
+		clock-names = "pclk";
+		#phy-cells = <0>;
+		resets = <&cru SRST_P_CSIPHY1>, <&cru SRST_CSIPHY1>;
+		reset-names = "apb", "phy";
+		rockchip,grf = <&csidphy1_grf>;
+		status = "disabled";
+	};
+
 	combphy0_ps: phy@fee00000 {
 		compatible = "rockchip,rk3588-naneng-combphy";
 		reg = <0x0 0xfee00000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
index 9d525c8ff725..3d5c8b753208 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -23,17 +23,28 @@
 		pwms = <&pwm2 0 25000 0>;
 	};
 
-	hdmi-con {
+	hdmi0-con {
 		compatible = "hdmi-connector";
 		type = "a";
 
 		port {
-			hdmi_con_in: endpoint {
+			hdmi0_con_in: endpoint {
 				remote-endpoint = <&hdmi0_out_con>;
 			};
 		};
 	};
 
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	leds: leds {
 		compatible = "gpio-leds";
 
@@ -117,6 +128,10 @@
 	status = "okay";
 };
 
+&hdmi0_sound {
+	status = "okay";
+};
+
 &hdmi0_in {
 	hdmi0_in_vp0: endpoint {
 		remote-endpoint = <&vp0_out_hdmi0>;
@@ -125,11 +140,45 @@
 
 &hdmi0_out {
 	hdmi0_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd &hdmim1_tx1_scl &hdmim1_tx1_sda>;
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
 	status = "okay";
 };
 
@@ -261,3 +310,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
index 92f0ed83c990..738637ecaf55 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
@@ -113,7 +113,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_lcd";
 		enable-active-high;
-		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcdpwr_en>;
 		vin-supply = <&vcc3v3_sys>;
@@ -148,6 +148,40 @@
 	};
 };
 
+&edp1 {
+	force-hpd;
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			hpd-absent-delay-ms = <200>;
+			no-hpd;
+			backlight = <&backlight>;
+			power-supply = <&vcc3v3_lcd>;
+
+			port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&edp1_in {
+	edp1_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_edp1>;
+	};
+};
+
+&edp1_out {
+	edp_out_panel: endpoint {
+		remote-endpoint = <&panel_in_edp>;
+	};
+};
+
+
 /* HDMI CEC is not used */
 &hdmi0 {
 	pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>;
@@ -166,7 +200,11 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
 	status = "okay";
 };
 
@@ -241,7 +279,7 @@
 &pinctrl {
 	lcd {
 		lcdpwr_en: lcdpwr-en {
-			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
 		bl_en: bl-en {
@@ -383,6 +421,8 @@
 };
 
 &vop {
+	assigned-clocks = <&cru DCLK_VOP2_SRC>;
+	assigned-clock-parents = <&cru PLL_V0PLL>;
 	status = "okay";
 };
 
@@ -396,3 +436,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp2 {
+	vp2_out_edp1: endpoint@ROCKCHIP_VOP2_EP_EDP1 {
+		reg = <ROCKCHIP_VOP2_EP_EDP1>;
+		remote-endpoint = <&edp1_in_vp2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
index 71ed680621b8..b07543315f87 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
@@ -277,6 +277,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	hym8563 {
 		hym8563_int: hym8563-int {
@@ -317,6 +321,7 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi
index 5e72d0eff0e0..8a783dc64c0e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-common.dtsi
@@ -126,6 +126,10 @@
 	};
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	leds {
 		led_user_en: led_user_en {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
index 05ae9bdcfbbd..08920344a4b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dtsi
@@ -4,12 +4,33 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 
 / {
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
+	/* Unnamed gated oscillator: 100MHz,3.3V,3225 */
+	pcie30_port0_refclk: pcie30_port1_refclk: pcie-oscillator {
+		compatible = "gated-fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "pcie30_refclk";
+		vdd-supply = <&vcc3v3_pi6c_05>;
+	};
+
 	vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_pcie2x1l0";
@@ -19,26 +40,26 @@
 		vin-supply = <&vcc_3v3_s3>;
 	};
 
-	vcc3v3_pcie3x2: regulator-vcc3v3-pcie3x2 {
+	vcc3v3_bkey: regulator-vcc3v3-bkey {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_HIGH>; /* PCIE_4G_PWEN */
 		pinctrl-names = "default";
-		pinctrl-0 = <&pcie3x2_vcc3v3_en>;
-		regulator-name = "vcc3v3_pcie3x2";
+		pinctrl-0 = <&pcie_4g_pwen>;
+		regulator-name = "vcc3v3_bkey";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <5000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 
-	vcc3v3_pcie3x4: regulator-vcc3v3-pcie3x4 {
+	vcc3v3_pcie30: vcc3v3_pi6c_05: regulator-vcc3v3-pi6c-05 {
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; /* PCIE30x4_PWREN_H */
 		pinctrl-names = "default";
-		pinctrl-0 = <&pcie3x4_vcc3v3_en>;
-		regulator-name = "vcc3v3_pcie3x4";
+		pinctrl-0 = <&pcie30x4_pwren_h>;
+		regulator-name = "vcc3v3_pcie30";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <5000>;
@@ -72,6 +93,26 @@
 	status = "okay";
 };
 
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
 &i2c6 {
 	status = "okay";
 
@@ -98,24 +139,52 @@
 };
 
 &pcie30phy {
+	data-lanes = <1 1 2 2>;
+	/* separate clock lines from the clock generator to phy and devices */
+	rockchip,rx-common-refclk-mode = <0 0 0 0>;
 	status = "okay";
 };
 
-/* B-Key and E-Key */
+/* M-Key */
 &pcie3x2 {
+	/*
+	 * The board has a "pcie_refclk" oscillator that needs enabling,
+	 * so add it to the list of clocks.
+	 */
+	clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
+		 <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
+		 <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>,
+		 <&pcie30_port1_refclk>;
+	clock-names = "aclk_mst", "aclk_slv",
+		      "aclk_dbi", "pclk",
+		      "aux", "pipe",
+		      "ref";
+	num-lanes = <2>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pcie3x2_rst>;
-	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTn_M1_L */
-	vpcie3v3-supply = <&vcc3v3_pcie3x2>;
+	pinctrl-0 = <&pcie30x2_perstn_m1_l>;
+	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* PCIE30X2_PERSTn_M1_L */
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
 	status = "okay";
 };
 
-/* M-Key */
+/* B-Key and E-Key */
 &pcie3x4 {
+	/*
+	 * The board has a "pcie_refclk" oscillator that needs enabling,
+	 * so add it to the list of clocks.
+	 */
+	clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
+		 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
+		 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
+		 <&pcie30_port0_refclk>;
+	clock-names = "aclk_mst", "aclk_slv",
+		      "aclk_dbi", "pclk",
+		      "aux", "pipe",
+		      "ref";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pcie3x4_rst>;
-	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* PCIE30X2_PERSTn_M1_L */
-	vpcie3v3-supply = <&vcc3v3_pcie3x4>;
+	pinctrl-0 = <&pcie30x4_perstn_m1_l>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTn_M1_L */
+	vpcie3v3-supply = <&vcc3v3_bkey>;
 	status = "okay";
 };
 
@@ -127,20 +196,20 @@
 	};
 
 	pcie3 {
-		pcie3x2_rst: pcie3x2-rst {
-			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		pcie3x2_vcc3v3_en: pcie3x2-vcc3v3-en {
-			rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		pcie_4g_pwen: pcie-4g-pwen {
+			rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		pcie3x4_rst: pcie3x4-rst {
-			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		pcie3x4_vcc3v3_en: pcie3x4-vcc3v3-en {
-			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		pcie30x4_pwren_h: pcie30x4-pwren-h {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
@@ -238,3 +307,18 @@
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index d6e464cdc536..ff1ba5ed56ef 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -132,6 +132,17 @@
 		};
 	};
 
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	pcie20_avdd0v85: regulator-pcie20-avdd0v85 {
 		compatible = "regulator-fixed";
 		regulator-name = "pcie20_avdd0v85";
@@ -206,6 +217,28 @@
 		pinctrl-0 = <&vcc3v3_pcie30_en>;
 	};
 
+	vcc3v3_pciewl_vbat: regulator-vcc3v3-pciewl-vbat {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "wlan-vbat";
+		vin-supply = <&vcc_3v3_s0>;
+	};
+
+	vcc3v3_wlan: regulator-vcc3v3-wlan {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwren>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "wlan-en";
+		vin-supply = <&vcc3v3_pciewl_vbat>;
+	};
+
 	vcc5v0_host: regulator-vcc5v0-host {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_host";
@@ -249,12 +282,26 @@
 		regulator-max-microvolt = <5000000>;
 		vin-supply = <&vcc5v0_usbdcin>;
 	};
+
+	vccio_wl: regulator-vccio-wl {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "wlan-vddio";
+		vin-supply = <&vcc_1v8_s0>;
+	};
 };
 
 &combphy0_ps {
 	status = "okay";
 };
 
+&combphy1_ps {
+	status = "okay";
+};
+
 &combphy2_psu {
 	status = "okay";
 };
@@ -328,7 +375,38 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi_receiver_cma {
+	status = "okay";
+};
+
+&hdmi_receiver {
+	hpd-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
 	status = "okay";
 };
 
@@ -405,7 +483,7 @@
 	status = "okay";
 
 	es8388: audio-codec@11 {
-		compatible = "everest,es8388";
+		compatible = "everest,es8388", "everest,es8328";
 		reg = <0x11>;
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
@@ -440,6 +518,30 @@
 	};
 };
 
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>, <&pcie2_0_wake>, <&pcie2_0_clkreq>, <&wifi_host_wake_irq>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_wlan>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x200000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+		bus-range = <0x20 0x2f>;
+
+		wifi: wifi@0,0 {
+			compatible = "pci14e4,449d";
+			reg = <0x210000 0 0 0 0>;
+			clocks = <&hym8563>;
+			clock-names = "lpo";
+		};
+	};
+};
+
 &pcie2x1l1 {
 	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
@@ -459,6 +561,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	audio {
 		hp_detect: headphone-detect {
@@ -487,6 +593,12 @@
 
 	};
 
+	hdmirx {
+		hdmirx_hpd: hdmirx-5v-detection {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	hym8563 {
 		hym8563_int: hym8563-int {
 			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -494,6 +606,18 @@
 	};
 
 	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_0_wake: pcie2-0-wake {
+			rockchip,pins = <4 RK_PA4 4 &pcfg_pull_none>;
+		};
+
+		pcie2_0_clkreq: pcie2-0-clkreq {
+			rockchip,pins = <4 RK_PA3 4 &pcfg_pull_none>;
+		};
+
 		pcie2_1_rst: pcie2-1-rst {
 			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
@@ -524,6 +648,16 @@
 			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	wlan {
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		wifi_pwren: wifi-pwren {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
 };
 
 &pwm2 {
@@ -1289,11 +1423,11 @@
 	status = "okay";
 };
 
-&vop_mmu {
+&vop {
 	status = "okay";
 };
 
-&vop {
+&vop_mmu {
 	status = "okay";
 };
 
@@ -1303,3 +1437,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
new file mode 100644
index 000000000000..60ba6ac55b23
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts
@@ -0,0 +1,979 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/rockchip,rk3588-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Rockchip RK3588 EVB2 V10 Board";
+	compatible = "rockchip,rk3588-evb2-v10", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dp-con {
+		compatible = "dp-connector";
+		label = "DP OUT";
+		type = "full-size";
+
+		port {
+			dp_con_in: endpoint {
+				remote-endpoint = <&dp0_out_con>;
+			};
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc5v0_usb>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usbdcin: regulator-vcc5v0-usbdcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usbdcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&dp0 {
+	pinctrl-0 = <&dp0m0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&dp0_in {
+	dp0_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_dp0>;
+	};
+};
+
+&dp0_out {
+	dp0_out_con: endpoint {
+		remote-endpoint = <&dp_con_in>;
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	sram-supply = <&vdd_gpu_mem_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&sdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom0_pins>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	non-removable;
+	no-sd;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-0 = <&wifi_host_wake_irq>;
+		pinctrl-names = "default";
+	};
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <2>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc5v0_sys>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				/* regulator coupling requires always-on */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-coupled-with = <&vdd_gpu_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vdd_gpu_mem_s0: dcdc-reg5 {
+				/* regulator coupling requires always-on */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+				regulator-name = "vdd_gpu_mem_s0";
+				regulator-coupled-with = <&vdd_gpu_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vdd_npu_mem_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vdd_vdenc_mem_s0: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v1_nldo_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v1_nldo_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1100000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd1_1v8_ddr_s3: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd1_1v8_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_codec_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avcc_1v8_codec_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s3: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_1v8_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd2l_0v9_ddr_s3: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd2l_0v9_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_0v75_hdmi_edp_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_hdmi_edp_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	pmic@1 {
+		compatible = "rockchip,rk806";
+		reg = <0x01>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>,
+			    <&rk806_slave_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_2v0_pldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_slave_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_slave_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_slave_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_cpu_big1_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big1_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big1_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_big0_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big0_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big0_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_lit_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_big1_mem_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big1_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big1_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+
+			vdd_cpu_big0_mem_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big0_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big0_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_mem_s0: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_lit_s0>;
+				regulator-coupled-max-spread = <10000>;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_cam_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v8_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd1v8_ddr_pll_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd1v8_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_1v8_pll_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_1v8_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_sd_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_2v8_cam_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_2v8_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_pll_s0: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_0v75_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v85_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_1v2_cam_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_1v2_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_1v2_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&usbdp_phy1 {
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop {
+	/*
+	 * If no dedicated PLL was specified, the GPLL would be automatically
+	 * assigned as the PLL source for dclk_vop2. As the frequency of GPLL
+	 * is 1188 MHz, we can only get typical clock frequencies such as
+	 * 74.25MHz, 148.5MHz, 297MHz, 594MHz.
+	 *
+	 * So here we set the parent clock of VP2 to V0PLL so that we can get
+	 * any frequency.
+	 */
+	assigned-clocks = <&cru DCLK_VOP2_SRC>;
+	assigned-clock-parents = <&cru PLL_V0PLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
+
+&vp2 {
+	vp2_out_dp0: endpoint@a {
+		reg = <ROCKCHIP_VOP2_EP_DP0>;
+		remote-endpoint = <&dp0_in_vp2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra-pinctrl.dtsi
index 244c66faa161..fb48ddc04bcb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-extra-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-extra-pinctrl.dtsi
@@ -160,14 +160,15 @@
 		hdmim0_tx1_scl: hdmim0-tx1-scl {
 			rockchip,pins =
 				/* hdmim0_tx1_scl */
-				<2 RK_PB5 4 &pcfg_pull_none>;
+				<2 RK_PB5 4 &pcfg_pull_none_drv_level_3_smt>;
 		};
 
 		/omit-if-no-ref/
 		hdmim0_tx1_sda: hdmim0-tx1-sda {
 			rockchip,pins =
 				/* hdmim0_tx1_sda */
-				<2 RK_PB4 4 &pcfg_pull_none>;
+				<2 RK_PB4 4 &pcfg_pull_none_drv_level_1_smt>;
+
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
index 0ce0934ec6b7..6e5a58428bba 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
@@ -7,6 +7,46 @@
 #include "rk3588-extra-pinctrl.dtsi"
 
 / {
+	hdmi1_sound: hdmi1-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,name = "hdmi1";
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi1>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s6_8ch>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * The 4k HDMI capture controller works only with 32bit
+		 * phys addresses and doesn't support IOMMU. HDMI RX CMA
+		 * must be reserved below 4GB.
+		 * The size of 160MB was determined as follows:
+		 * (3840 * 2160 pixels) * (4 bytes/pixel) * (2 frames/buffer) / 10^6 = 66MB
+		 * To ensure sufficient support for practical use-cases,
+		 * we doubled the 66MB value.
+		 */
+		hdmi_receiver_cma: hdmi-receiver-cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x0 0x0 0x0 0xffffffff>;
+			size = <0x0 (160 * 0x100000)>; /* 160MiB */
+			alignment = <0x0 0x40000>; /* 64K */
+			no-map;
+			status = "disabled";
+		};
+	};
+
 	usb_host1_xhci: usb@fc400000 {
 		compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
 		reg = <0x0 0xfc400000 0x0 0x400000>;
@@ -67,6 +107,26 @@
 		};
 	};
 
+	hdptxphy1_grf: syscon@fd5e4000 {
+		compatible = "rockchip,rk3588-hdptxphy-grf", "syscon";
+		reg = <0x0 0xfd5e4000 0x0 0x100>;
+	};
+
+	spdif_tx5: spdif-tx@fddb8000 {
+		compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif";
+		reg = <0x0 0xfddb8000 0x0 0x1000>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		assigned-clocks = <&cru CLK_SPDIF5_DP1_SRC>;
+		clock-names = "mclk", "hclk";
+		clocks = <&cru MCLK_SPDIF5>, <&cru HCLK_SPDIF5_DP1>;
+		dma-names = "tx";
+		dmas = <&dmac1 22>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH 0>;
+		power-domains = <&power RK3588_PD_VO0>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	i2s8_8ch: i2s@fddc8000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfddc8000 0x0 0x1000>;
@@ -84,6 +144,21 @@
 		status = "disabled";
 	};
 
+	spdif_tx4: spdif-tx@fdde8000 {
+		compatible = "rockchip,rk3588-spdif", "rockchip,rk3568-spdif";
+		reg = <0x0 0xfdde8000 0x0 0x1000>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		assigned-clocks = <&cru CLK_SPDIF4_SRC>;
+		clock-names = "mclk", "hclk";
+		clocks = <&cru MCLK_SPDIF4>, <&cru HCLK_SPDIF4>;
+		dma-names = "tx";
+		dmas = <&dmac1 8>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH 0>;
+		power-domains = <&power RK3588_PD_VO1>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	i2s6_8ch: i2s@fddf4000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfddf4000 0x0 0x1000>;
@@ -135,6 +210,137 @@
 		status = "disabled";
 	};
 
+	dp1: dp@fde60000 {
+		compatible = "rockchip,rk3588-dp";
+		reg = <0x0 0xfde60000 0x0 0x4000>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru CLK_AUX16M_1>;
+		assigned-clock-rates = <16000000>;
+		clocks = <&cru PCLK_DP1>, <&cru CLK_AUX16M_1>,
+			 <&cru CLK_DP1>, <&cru MCLK_I2S8_8CH_TX>,
+			 <&cru MCLK_SPDIF5_DP1>;
+		clock-names = "apb", "aux", "hdcp", "i2s", "spdif";
+		phys = <&usbdp_phy1 PHY_TYPE_DP>;
+		power-domains = <&power RK3588_PD_VO0>;
+		resets = <&cru SRST_DP1>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dp1_in: port@0 {
+				reg = <0>;
+			};
+
+			dp1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	hdmi1: hdmi@fdea0000 {
+		compatible = "rockchip,rk3588-dw-hdmi-qp";
+		reg = <0x0 0xfdea0000 0x0 0x20000>;
+		clocks = <&cru PCLK_HDMITX1>,
+			 <&cru CLK_HDMITX1_EARC>,
+			 <&cru CLK_HDMITX1_REF>,
+			 <&cru MCLK_I2S6_8CH_TX>,
+			 <&cru CLK_HDMIHDP1>,
+			 <&cru HCLK_VO1>;
+		clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1";
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "avp", "cec", "earc", "main", "hpd";
+		phys = <&hdptxphy1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd
+			     &hdmim1_tx1_scl &hdmim1_tx1_sda>;
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_HDMITX1_REF>, <&cru SRST_HDMIHDP1>;
+		reset-names = "ref", "hdp";
+		rockchip,grf = <&sys_grf>;
+		rockchip,vo-grf = <&vo1_grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi1_in: port@0 {
+				reg = <0>;
+			};
+
+			hdmi1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	edp1: edp@fded0000 {
+		compatible = "rockchip,rk3588-edp";
+		reg = <0x0 0xfded0000 0x0 0x1000>;
+		clocks = <&cru CLK_EDP1_24M>, <&cru PCLK_EDP1>;
+		clock-names = "dp", "pclk";
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
+		phys = <&hdptxphy1>;
+		phy-names = "dp";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_EDP1_24M>, <&cru SRST_P_EDP1>;
+		reset-names = "dp", "apb";
+		rockchip,grf = <&vo1_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp1_in: port@0 {
+				reg = <0>;
+			};
+
+			edp1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	hdmi_receiver: hdmi_receiver@fdee0000 {
+		compatible = "rockchip,rk3588-hdmirx-ctrler", "snps,dw-hdmi-rx";
+		reg = <0x0 0xfdee0000 0x0 0x6000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "cec", "hdmi", "dma";
+		clocks = <&cru ACLK_HDMIRX>,
+			 <&cru CLK_HDMIRX_AUD>,
+			 <&cru CLK_CR_PARA>,
+			 <&cru PCLK_HDMIRX>,
+			 <&cru CLK_HDMIRX_REF>,
+			 <&cru PCLK_S_HDMIRX>,
+			 <&cru HCLK_VO1>;
+		clock-names = "aclk",
+			      "audio",
+			      "cr_para",
+			      "pclk",
+			      "ref",
+			      "hclk_s_hdmirx",
+			      "hclk_vo1";
+		memory-region = <&hdmi_receiver_cma>;
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_A_HDMIRX>, <&cru SRST_P_HDMIRX>,
+			 <&cru SRST_HDMIRX_REF>, <&cru SRST_A_HDMIRX_BIU>;
+		reset-names = "axi", "apb", "ref", "biu";
+		rockchip,grf = <&sys_grf>;
+		rockchip,vo1-grf = <&vo1_grf>;
+		status = "disabled";
+	};
+
 	pcie3x4: pcie@fe150000 {
 		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
 		#address-cells = <3>;
@@ -162,6 +368,7 @@
 		linux,pci-domain = <0>;
 		max-link-speed = <3>;
 		msi-map = <0x0000 &its1 0x0000 0x1000>;
+		iommu-map = <0x0000 &mmu600_pcie 0x0000 0x1000>;
 		num-lanes = <4>;
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
@@ -248,6 +455,7 @@
 		linux,pci-domain = <1>;
 		max-link-speed = <3>;
 		msi-map = <0x1000 &its1 0x1000 0x1000>;
+		iommu-map = <0x1000 &mmu600_pcie 0x1000 0x1000>;
 		num-lanes = <2>;
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
@@ -297,6 +505,7 @@
 		linux,pci-domain = <2>;
 		max-link-speed = <2>;
 		msi-map = <0x2000 &its0 0x2000 0x1000>;
+		iommu-map = <0x2000 &mmu600_pcie 0x2000 0x1000>;
 		num-lanes = <1>;
 		phys = <&combphy1_ps PHY_TYPE_PCIE>;
 		phy-names = "pcie-phy";
@@ -395,6 +604,23 @@
 		};
 	};
 
+	hdptxphy1: phy@fed70000 {
+		compatible = "rockchip,rk3588-hdptx-phy";
+		reg = <0x0 0xfed70000 0x0 0x2000>;
+		clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX1>;
+		clock-names = "ref", "apb";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+		resets = <&cru SRST_HDPTX1>, <&cru SRST_P_HDPTX1>,
+			 <&cru SRST_HDPTX1_INIT>, <&cru SRST_HDPTX1_CMN>,
+			 <&cru SRST_HDPTX1_LANE>, <&cru SRST_HDPTX1_ROPLL>,
+			 <&cru SRST_HDPTX1_LCPLL>;
+		reset-names = "phy", "apb", "init", "cmn", "lane", "ropll",
+			      "lcpll";
+		rockchip,grf = <&hdptxphy1_grf>;
+		status = "disabled";
+	};
+
 	usbdp_phy1: phy@fed90000 {
 		compatible = "rockchip,rk3588-usbdp-phy";
 		reg = <0x0 0xfed90000 0x0 0x10000>;
@@ -446,3 +672,24 @@
 		status = "disabled";
 	};
 };
+
+&vop {
+	clocks = <&cru ACLK_VOP>,
+		 <&cru HCLK_VOP>,
+		 <&cru DCLK_VOP0>,
+		 <&cru DCLK_VOP1>,
+		 <&cru DCLK_VOP2>,
+		 <&cru DCLK_VOP3>,
+		 <&cru PCLK_VOP_ROOT>,
+		 <&hdptxphy0>,
+		 <&hdptxphy1>;
+	clock-names = "aclk",
+		      "hclk",
+		      "dclk_vp0",
+		      "dclk_vp1",
+		      "dclk_vp2",
+		      "dclk_vp3",
+		      "pclk_vop",
+		      "pll_hdmiphy0",
+		      "pll_hdmiphy1";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi
index 390051317389..4331cdc70f97 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-fet3588-c.dtsi
@@ -205,6 +205,10 @@
 	};
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	leds {
 		led_rgb_b: led-rgb-b {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi
new file mode 100644
index 000000000000..80e16ea4154c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-core-3588j.dtsi
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3588.dtsi"
+
+/ {
+	compatible = "firefly,core-3588j", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m2_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: vdd_npu_mem_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-name = "vdd_npu_s0";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "avcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			avdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "avdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "avdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+/* rk3588 preferred debug out */
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi
new file mode 100644
index 000000000000..6726eeb49255
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3588.dtsi"
+
+/ {
+	compatible = "firefly,icore-3588q", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m2_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: vdd_npu_mem_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-name = "vdd_npu_s0";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <150000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts b/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts
new file mode 100644
index 000000000000..e086114c7634
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-itx-3588j.dts
@@ -0,0 +1,702 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "dt-bindings/usb/pd.h"
+
+#include "rk3588-firefly-core-3588j.dtsi"
+
+/ {
+	model = "Firefly ITX-3588J";
+	compatible = "firefly,itx-3588j", "firefly,core-3588j", "rockchip,rk3588";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	/*
+	 * there are also a "Reset" and "Mask ROM" button, but the needed
+	 * settings are unknown at this time
+	 */
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <2000>;
+		};
+	};
+
+	analog-sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_detect>;
+		pinctrl-names = "default";
+		simple-audio-card,aux-devs = <&amp_headphones>, <&amp_speaker>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
+		simple-audio-card,mclk-fs = <384>;
+		simple-audio-card,name = "rockchip_es8323";
+		simple-audio-card,pin-switches = "Headphones", "Speaker";
+		simple-audio-card,routing =
+			"Speaker Amplifier INL", "LOUT2",
+			"Speaker Amplifier INR", "ROUT2",
+			"Speaker", "Speaker Amplifier OUTL",
+			"Speaker", "Speaker Amplifier OUTR",
+			"Headphones Amplifier INL", "LOUT1",
+			"Headphones Amplifier INR", "ROUT1",
+			"Headphones", "Headphones Amplifier OUTL",
+			"Headphones", "Headphones Amplifier OUTR",
+			"LINPUT1", "Microphone Jack",
+			"RINPUT1", "Microphone Jack",
+			"LINPUT2", "Onboard Microphone",
+			"RINPUT2", "Onboard Microphone";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Microphone", "Onboard Microphone",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8323>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	/*
+	 * this does not seem to be a proper "amplifier" but is just
+	 * a way to control the GPIO pins to switch on or off the given
+	 * sound output device
+	 */
+	amp_headphones: headphones-audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&headphone_amplifier_en>;
+		sound-name-prefix = "Headphones Amplifier";
+	};
+
+	amp_speaker: speaker-audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_amplifier_en>;
+		sound-name-prefix = "Speaker Amplifier";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 120 150 180 210 240 255>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm15 0 50000 1>;
+	};
+
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/*
+		 * There is also a Power LED control @ RK_PB3 on
+		 * GPIO1 but for some reason it doesn't seem to work right
+		 */
+
+		user_led: led-1 {
+			gpios = <&pca9555 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	pcie30_avdd0v75: regulator-pcie30-avdd0v75 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		regulator-name = "pcie30_avdd0v75";
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	vbus5v0_typec_pwr_en: regulator-vbus5v0-typec-pwr-en {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&pca9555 12 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vbus5v0_typec_pwr_en";
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-name = "vcc12v_dcin";
+	};
+
+	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie3_vcc3v3_en>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_pcie30";
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_host3: regulator-vcc5v0-host3 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&pca9555 7 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_host3";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_sys";
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_usb";
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_fan_pwr_en: regulator-vcc-fan-pwr-en {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&pca9555 11 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vcc_fan_pwr_en";
+	};
+
+	vcc_hub_reset: regulator-vcc-hub-reset {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&pca9555 4 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vcc_hub_reset";
+	};
+
+	vcc_hub3_reset: regulator-vcc-hub3-reset {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&pca9555 6 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-name = "vcc_hub3_reset";
+	};
+
+	vcc_sata_pwr_en: regulator-vcc-sata-pwr-en {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&pca9555 10 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vcc_sata_pwr_en";
+	};
+};
+
+&avcc_1v8_s0 {
+	regulator-state-mem {
+		regulator-on-in-suspend;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	tx_delay = <0x45>;
+	rx_delay = <0x4a>;
+	status = "okay";
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	tx_delay = <0x42>;
+	rx_delay = <0x4f>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	sram-supply = <&vdd_gpu_mem_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	/*
+	 * in the Firefly BSP source this was confusingly called an
+	 * "ES8388" - it actually seems to be an ES8323 and the drivers
+	 * for that work best
+	 */
+	es8323: audio-codec@11 {
+		compatible = "everest,es8323";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m0_xfer>;
+	status = "okay";
+
+	pca9555: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&vbus5v0_typec_pwr_en>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "source";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&dwc3_0_role_switch>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					dp_altmode_mux: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+	};
+};
+
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>;
+	reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_rst>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pinctrl {
+	dp {
+		dp1_hpd: dp1-hpd {
+			 rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		sys_led_pin: sys-led-pin {
+			rockchip,pins =
+				<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3_rst: pcie3-rst {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie3_vcc3v3_en: pcie3-vcc3v3-en {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		headphone_amplifier_en: headphone-amplifier-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		speaker_amplifier_en: speaker-amplifier-en {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usbc0_int: usbc0-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm15 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm15m2_pins>;
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+/* uart/232/485 */
+&uart0 {
+	pinctrl-0 = <&uart0m2_xfer>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m1_xfer>;
+	status = "okay";
+};
+
+/* usb enable */
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	usb-role-switch;
+	dr_mode = "otg";
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dwc3_0_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host2_xhci {
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	orientation-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_orientation_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+
+		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dp_altmode_mux>;
+		};
+	};
+};
+
+&usbdp_phy1 {
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&vcc_1v8_s0 {
+	regulator-state-mem {
+		regulator-on-in-suspend;
+		regulator-suspend-microvolt = <1800000>;
+	};
+};
+
+/* for fan when deep sleep */
+&vdd_log_s0 {
+	regulator-state-mem {
+		regulator-on-in-suspend;
+		regulator-suspend-microvolt = <750000>;
+	};
+};
+
+/* display generator */
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
index b3a04ca370bb..5fbbeb6f5a93 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
@@ -335,7 +335,18 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdmi_receiver_cma {
+	status = "okay";
+};
+
+&hdmi_receiver {
+	hpd-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdptxphy0 {
 	status = "okay";
 };
 
@@ -478,6 +489,12 @@
 		};
 	};
 
+	hdmirx {
+		hdmirx_hpd: hdmirx-5v-detection {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	pcie {
 		pcie2_0_rst: pcie2-0-rst {
 			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi
index e3a9598b99fc..af431fdcbea7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi
@@ -222,6 +222,10 @@
 		compatible = "realtek,rt5616";
 		reg = <0x1b>;
 		#sound-dai-cells = <0>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
 	};
 };
 
@@ -256,6 +260,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	gpio-leds {
 		led_sys_pin: led-sys-pin {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts b/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts
new file mode 100644
index 000000000000..73d8ce4fde2b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts
@@ -0,0 +1,830 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "H96 Max V58 TV Box";
+	compatible = "haochuangyi,h96-max-v58", "rockchip,rk3588";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdhci;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-function {
+			label = "Reset";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_1v1_nldo_s3: regulator-1v1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	pcie_3v3: regulator-3v3-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pcie2_0_pow>;
+		pinctrl-names = "default";
+		regulator-name = "pcie_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	wl_en_3v3: regulator-3v3-wlen {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wl_en>;
+		pinctrl-names = "default";
+		/*
+		 * Needs to be brought up before the PCIe driver is probed,
+		 * otherwise detecting the WLAN module requires rescanning
+		 * the bus, and even then it fails half of the time during
+		 * firmware load
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "wl_en_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: regulator-5v0-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_host_en>;
+		pinctrl-names = "default";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_otg: regulator-5v0-otg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_otg_en>;
+		pinctrl-names = "default";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: regulator-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif_tx0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x200000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+		bus-range = <0x20 0x2f>;
+
+		wifi: wifi@0,0 {
+			compatible = "pci14e4,449d";
+			reg = <0x210000 0 0 0 0>;
+			clocks = <&hym8563>;
+			clock-names = "lpo";
+		};
+	};
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_pins: led-pins {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_0_pow: pcie2-0-pow {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifibt {
+		wl_en: wl-en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wl_wake_host: wl-wake-host {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_en: bt-en {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake: bt-wake {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&spdif_tx0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif0m1_tx>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&uart9 {
+	pinctrl-0 = <&uart9m0_xfer &uart9m0_ctsn &uart9m0_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&hym8563>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&bt_en>, <&bt_wake_host>, <&bt_wake>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usbdp_phy0 {
+	status = "okay";
+};
+
+&usbdp_phy1 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar-ethernet-switch.dtso b/arch/arm64/boot/dts/rockchip/rk3588-jaguar-ethernet-switch.dtso
new file mode 100644
index 000000000000..7d9b1f080b3f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar-ethernet-switch.dtso
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ *
+ * Device Tree Overlay for the Ethernet Switch adapter for the Mezzanine
+ * connector on RK3588 Jaguar
+ * (manual: https://embedded.cherry.de/jaguar-ethernet-switch-user-manual/)
+ *
+ * This adapter has a KSZ9896 Ethernet Switch with 4 1GbE Ethernet connectors,
+ * two user controllable LEDs, and an M12 12-pin connector which exposes the
+ * following signals:
+ *  - RS232/RS485 (max 250Kbps/500Kbps, RX pin1, TX pin2)
+ *  - two digital inputs (pin4 routed to GPIO3_C5 on SoC, pin5 to GPIO4_B4)
+ *  - two digital outputs (pin7 routed to GPIO3_D3 on SoC, pin8 to GPIO3_D1)
+ *  - two analog inputs (pin10 to channel1 of ADS1015, pin11 to channel2)
+ *
+ * RK3588 Jaguar can be powered entirely through the adapter via the M8 3-pin
+ * connector (12-24V).
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rockchip,rk3588-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+	aliases {
+		ethernet1 = "/ethernet@fe1c0000";
+	};
+
+	mezzanine-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_usr1_pin &led_usr2_pin>;
+
+		led-1 {
+			gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+			label = "USR1";
+		};
+
+		led-2 {
+			gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+			label = "USR2";
+		};
+	};
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1_rx_bus2
+		     &gmac1_tx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus
+		     &eth1_pins>;
+	rx_delay = <0x0>;
+	tx_delay = <0x0>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	/*
+	 * ADS1015 can handle high-speed (HS) mode (up to 3.4MHz) on I2C bus,
+	 * but SoC can handle only up to 400kHz.
+	 */
+	clock-frequency = <400000>;
+	#size-cells = <0>;
+	status = "okay";
+
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PC7 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&adc_alert>;
+		pinctrl-names = "default";
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <5>; /* Single-ended between AIN1 and GND */
+			ti,datarate = <0>;
+			ti,gain = <5>;
+		};
+
+		channel@2 {
+			reg = <6>; /* Single-ended between AIN2 and GND */
+			ti,datarate = <0>;
+			ti,gain = <5>;
+		};
+	};
+
+	switch@5f {
+		compatible = "microchip,ksz9896";
+		reg = <0x5f>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; /* ETH_INTRP_N */
+		pinctrl-0 = <&eth_reset_n &eth_intrp_n>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; /* ETH_RESET */
+		microchip,synclko-disable; /* CLKO_25_125 only routed to TP1 */
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				label = "ETH1";
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				label = "ETH2";
+			};
+
+			lan3: port@2 {
+				reg = <2>;
+				label = "ETH3";
+			};
+
+			lan4: port@3 {
+				reg = <3>;
+				label = "ETH4";
+			};
+
+			port@5 {
+				reg = <5>;
+				ethernet = <&gmac1>;
+				label = "CPU";
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	adc {
+		adc_alert: adc-alert-irq {
+			rockchip,pins =
+				<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ethernet {
+		eth_intrp_n: eth-intrp-n {
+			rockchip,pins =
+				<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		eth_reset_n: eth-reset-n {
+			rockchip,pins =
+				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_usr1_pin: led-usr1-pin {
+			rockchip,pins =
+				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		led_usr2_pin: led-usr2-pin {
+			rockchip,pins =
+				<3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&uart9 {
+	/* GPIO3_D0/EN_RS485_MODE for switching between RS232 and RS485 */
+	pinctrl-0 = <&uart9m2_xfer &uart9m2_rtsn>;
+	pinctrl-names = "default";
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar-pre-ict-tester.dtso b/arch/arm64/boot/dts/rockchip/rk3588-jaguar-pre-ict-tester.dtso
new file mode 100644
index 000000000000..9d44dfe2f30d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar-pre-ict-tester.dtso
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2024 Cherry Embedded Solutions GmbH
+ *
+ * Device Tree Overlay for the Pre-ICT tester adapter for the Mezzanine
+ * connector on RK3588 Jaguar.
+ *
+ * This adapter has a PCIe Gen2 x1 M.2 M-Key connector and two proprietary
+ * camera connectors (each their own I2C bus, clock, reset and PWM lines as well
+ * as 2-lane CSI).
+ *
+ * This adapter routes some GPIOs to power rails and loops together some other
+ * GPIOs.
+ *
+ * This adapter is used during manufacturing for validating proper soldering of
+ * the mezzanine connector.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+	pre_ict_tester_vcc_1v2: regulator-pre-ict-tester-vcc-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pre_ict_tester_vcc_1v2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	pre_ict_tester_vcc_2v8: regulator-pre-ict-tester-vcc-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "pre_ict_tester_vcc_2v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&gpio3 {
+	pinctrl-0 = <&pre_ict_pwr2gpio>;
+	pinctrl-names = "default";
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2x1l2_perstn_m0>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; /* PCIE20X1_2_PERSTN_M0 */
+	vpcie3v3-supply = <&vcc_3v3_s3>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcie2x1l2 {
+		pcie2x1l2_perstn_m0: pcie2x1l2-perstn-m0 {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pre-ict-tester {
+		pre_ict_pwr2gpio: pre-ict-pwr2gpio-pins {
+			rockchip,pins =
+			/*
+			 * GPIO3_A3 requires two power rails to be properly
+			 * routed to the mezzanine connector to report a proper
+			 * value: VCC_1V8_S0_1 and VCC_IN_2. It may report an
+			 * incorrect value if VCC_1V8_S0_1 isn't properly routed,
+			 * but GPIO3_C6 would catch this HW soldering issue.
+			 * If VCC_IN_2 is properly routed, GPIO3_A3 should be
+			 * LOW. The signal shall not read HIGH in the event
+			 * GPIO3_A3 isn't properly routed due to soldering
+			 * issue. Therefore, let's enforce a pull-up (which is
+			 * the SoC default for this pin).
+			 */
+				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+			/*
+			 * GPIO3_A4 is directly routed to VCC_1V8_S0_2 power
+			 * rail. It should be HIGH if all is properly soldered.
+			 * To guarantee that, a pull-down is enforced (which is
+			 * the SoC default for this pin) so that LOW is read if
+			 * the loop doesn't exist on HW (soldering issue on
+			 * either signals).
+			 */
+				<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>,
+			/*
+			 * GPIO3_B2 requires two power rails to be properly
+			 * routed to the mezzanine connector to report a proper
+			 * value: VCC_1V8_S0_1 and VCC_IN_1. It may report an
+			 * incorrect value if VCC_1V8_S0_1 isn't properly routed,
+			 * but GPIO3_C6 would catch this HW soldering issue.
+			 * If VCC_IN_1 is properly routed, GPIO3_B2 should be
+			 * LOW. This is an issue if GPIO3_B2 isn't properly
+			 * routed due to soldering issue, because GPIO3_B2
+			 * default bias is pull-down therefore being LOW. So
+			 * the worst case scenario and the pass scenario expect
+			 * the same value. Make GPIO3_B2 a pull-up so that a
+			 * soldering issue on GPIO3_B2 reports HIGH but proper
+			 * soldering reports LOW.
+			 */
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+			/*
+			 * GPIO3_C6 is directly routed to VCC_1V8_S0_1 power
+			 * rail. It should be HIGH if all is properly soldered.
+			 * This is an issue if GPIO3_C6 or VCC_1V8_S0_1 isn't
+			 * properly routed due to soldering issue, because
+			 * GPIO3_C6 default bias is pull-up therefore being HIGH
+			 * in all cases:
+			 *  - GPIO3_C6 is floating (so HIGH) if GPIO3_C6 is not
+			 *    routed properly,
+			 *  - GPIO3_C6 is floating (so HIGH) if VCC_1V8_S0_1 is
+			 *    not routed properly,
+			 *  - GPIO3_C6 is HIGH if everything is proper,
+			 * Make GPIO3_C6 a pull-down so that a soldering issue
+			 * on GPIO3_C6 or VCC_1V8_S0_1 reports LOW but proper
+			 * soldering reports HIGH.
+			 */
+				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>,
+			/*
+			 * GPIO3_D2 is routed to VCC_5V0_1 power rail through a
+			 * voltage divider on the adapter.
+			 * It should be HIGH if all is properly soldered.
+			 * To guarantee that, a pull-down is enforced (which is
+			 * the SoC default for this pin) so that LOW is read if
+			 * the loop doesn't exist on HW (soldering issue on
+			 * either signals).
+			 */
+				<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>,
+			/*
+			 * GPIO3_D3 is routed to VCC_5V0_2 power rail through a
+			 * voltage divider on the adapter.
+			 * It should be HIGH if all is properly soldered.
+			 * To guarantee that, a pull-down is enforced (which is
+			 * the SoC default for this pin) so that LOW is read if
+			 * the loop doesn't exist on HW (soldering issue on
+			 * either signals).
+			 */
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>,
+			/*
+			 * GPIO3_D4 is routed to VCC_3V3_S3_1 power rail through
+			 * a voltage divider on the adapter.
+			 * It should be HIGH if all is properly soldered.
+			 * To guarantee that, a pull-down is enforced (which is
+			 * the SoC default for this pin) so that LOW is read if
+			 * the loop doesn't exist on HW (soldering issue on
+			 * either signals).
+			 */
+				<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>,
+			/*
+			 * GPIO3_D5 is routed to VCC_3V3_S3_2 power rail through
+			 * a voltage divider on the adapter.
+			 * It should be HIGH if all is properly soldered.
+			 * To guarantee that, a pull-down is enforced (which is
+			 * the SoC default for this pin) so that LOW is read if
+			 * the loop doesn't exist on HW (soldering issue on
+			 * either signals).
+			 */
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
index 90f823b2c219..176925d0a1a8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
@@ -10,6 +10,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
+#include "rk8xx.h"
 #include "rk3588.dtsi"
 
 / {
@@ -303,7 +304,11 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
 	status = "okay";
 };
 
@@ -333,6 +338,56 @@
 		};
 	};
 
+	typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cc_int1>;
+		vbus-supply = <&vcc_5v0_usb_c1>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USBC-1 P11";
+			power-role = "source";
+			self-powered;
+			source-pdos =
+				<PDO_FIXED(5000, 1500, PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)>;
+			vbus-supply = <&vcc_5v0_usb_c1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc0_hs: endpoint {
+						remote-endpoint = <&usb_host0_xhci_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc0_ss: endpoint {
+						remote-endpoint = <&usbdp_phy0_typec_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usbc0_sbu: endpoint {
+						remote-endpoint = <&usbdp_phy0_typec_sbu>;
+					};
+				};
+			};
+		};
+	};
+
 	vdd_npu_s0: regulator@42 {
 		compatible = "rockchip,rk8602";
 		reg = <0x42>;
@@ -394,6 +449,56 @@
 	pinctrl-0 = <&i2c8m2_xfer>;
 	status = "okay";
 
+	typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cc_int2>;
+		vbus-supply = <&vcc_5v0_usb_c2>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USBC-2 P12";
+			power-role = "source";
+			self-powered;
+			source-pdos =
+				<PDO_FIXED(5000, 1500, PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)>;
+			vbus-supply = <&vcc_5v0_usb_c2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc1_hs: endpoint {
+						remote-endpoint = <&usb_host1_xhci_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc1_ss: endpoint {
+						remote-endpoint = <&usbdp_phy1_typec_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usbc1_sbu: endpoint {
+						remote-endpoint = <&usbdp_phy1_typec_sbu>;
+					};
+				};
+			};
+		};
+	};
+
 	vdd_cpu_big0_s0: regulator@42 {
 		compatible = "rockchip,rk8602";
 		reg = <0x42>;
@@ -412,6 +517,10 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &mdio0 {
 	rgmii_phy: ethernet-phy@6 {
 		/* KSZ9031 or KSZ9131 */
@@ -451,6 +560,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	emmc {
 		emmc_reset: emmc-reset {
@@ -483,6 +596,26 @@
 			rockchip,pins = <0 RK_PC7 12 &pcfg_pull_none>;
 		};
 	};
+
+	usb3 {
+		cc_int1: cc-int1 {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cc_int2: cc-int2 {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		typec0_sbu_dc_pins: typec0-sbu-dc-pins {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		typec1_sbu_dc_pins: typec1-sbu-dc-pins {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
 };
 
 &saradc {
@@ -503,7 +636,6 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
-	supports-cqe;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
@@ -562,6 +694,7 @@
 		vcc13-supply = <&vcc_1v1_nldo_s3>;
 		vcc14-supply = <&vcc_1v1_nldo_s3>;
 		vcca-supply = <&vcc5v0_sys>;
+		rockchip,reset-mode = <RK806_RESTART>;
 
 		rk806_dvs1_null: dvs1-null-pins {
 			pins = "gpio_pwrctrl1";
@@ -851,6 +984,24 @@
 	status = "okay";
 };
 
+/* USB-C P11 connector */
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+/* USB-C P12 connector */
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
@@ -893,6 +1044,56 @@
 	status = "okay";
 };
 
+/* Type-C on P11 */
+&usbdp_phy0 {
+	orientation-switch;
+	pinctrl-names = "default";
+	pinctrl-0 = <&typec0_sbu_dc_pins>;
+	sbu1-dc-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* Q7_USB_C0_SBU1_DC */
+	sbu2-dc-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; /* Q7_USB_C0_SBU2_DC */
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_typec_ss: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_ss>;
+		};
+
+		usbdp_phy0_typec_sbu: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usbc0_sbu>;
+		};
+	};
+};
+
+/* Type-C on P12 */
+&usbdp_phy1 {
+	orientation-switch;
+	pinctrl-names = "default";
+	pinctrl-0 = <&typec1_sbu_dc_pins>;
+	sbu1-dc-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; /* Q7_USB_C1_SBU1_DC */
+	sbu2-dc-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; /* Q7_USB_C1_SBU2_DC */
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy1_typec_ss: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc1_ss>;
+		};
+
+		usbdp_phy1_typec_sbu: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usbc1_sbu>;
+		};
+	};
+};
+
 /* host0 on P10 USB-A */
 &usb_host0_ehci {
 	status = "okay";
@@ -903,6 +1104,36 @@
 	status = "okay";
 };
 
+/* host0 on P11 USB-C */
+&usb_host0_xhci {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_host0_xhci_drd_sw: endpoint {
+			remote-endpoint = <&usbc0_hs>;
+		};
+	};
+};
+
+/* host1 on P12 USB-C */
+&usb_host1_xhci {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_host1_xhci_drd_sw: endpoint {
+			remote-endpoint = <&usbc1_hs>;
+		};
+	};
+};
+
 /* host1 on M.2 E-key */
 &usb_host1_ehci {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts b/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts
new file mode 100644
index 000000000000..78a4e896f665
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2024 MNT Research GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "rk3588-firefly-icore-3588q.dtsi"
+
+/ {
+	model = "MNT Reform 2 with RCORE RK3588 Module";
+	compatible = "mntre,reform2-rcore", "firefly,icore-3588q", "rockchip,rk3588";
+	chassis-type = "laptop";
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 8 16 32 64 128 160 200 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm8 0 10000 0>;
+	};
+
+	gmac0_clkin: external-gmac0-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac0_clkin";
+	};
+
+	pcie30_avdd1v8: regulator-pcie30-avdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "pcie30_avdd1v8";
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	pcie30_avdd0v75: regulator-pcie30-avdd0v75 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		regulator-name = "pcie30_avdd0v75";
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-name = "vcc12v_dcin";
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_pcie30";
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_host";
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_sys";
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_usb";
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus
+		     &gmac0_clkinout
+		     &eth_phy_reset>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	sram-supply = <&vdd_gpu_mem_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_hdmi0>;
+	};
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m0_xfer>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pcie2x1l2 {
+	pinctrl-0 = <&pcie2_0_rst>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_reset>;
+	reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pinctrl {
+	dp {
+		dp1_hpd: dp1-hpd {
+			rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3_reset: pcie3-reset {
+			rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	eth_phy {
+		eth_phy_reset: eth-phy-reset {
+			rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm8 {
+	pinctrl-0 = <&pwm8m2_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <40000000>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&vcc3v3_pcie30>;
+	vqmmc-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	status = "okay";
+};
+
+&usbdp_phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp2 {
+	vp2_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index cb350727d116..fafeabe9adf9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -52,6 +52,17 @@
 		};
 	};
 
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
@@ -163,8 +174,6 @@
 		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&typec5v_pwren>;
-		regulator-always-on;
-		regulator-boot-on;
 		regulator-name = "vbus5v0_typec";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -177,8 +186,6 @@
 		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb5v_pwren>;
-		regulator-always-on;
-		regulator-boot-on;
 		regulator-name = "vbus5v0_usb";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -360,7 +367,46 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdmi_receiver_cma {
+	status = "okay";
+};
+
+&hdmi_receiver {
+	hpd-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
 	status = "okay";
 };
 
@@ -426,24 +472,30 @@
 };
 
 &i2c6 {
-	clock-frequency = <200000>;
 	status = "okay";
 
-	fusb302: typec-portc@22 {
+	usbc0: usb-typec@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&usbc0_int>;
 		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
 		vbus-supply = <&vbus5v0_typec>;
+		status = "okay";
 
 		connector {
 			compatible = "usb-c-connector";
 			data-role = "dual";
 			label = "USB-C";
-			power-role = "source";
+			op-sink-microwatt = <1000000>;
+			/* fusb302 supports PD Rev 2.0 Ver 1.2 */
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
+			power-role = "dual";
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
 			source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "source";
+			typec-power-opmode = "1.5A";
 
 			ports {
 				#address-cells = <1>;
@@ -531,6 +583,14 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
 &pcie2x1l0 {
 	reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc_3v3_pcie20>;
@@ -565,6 +625,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	gpio-leds {
 		sys_led_pin: sys-led-pin {
@@ -576,6 +640,12 @@
 		};
 	};
 
+	hdmirx {
+		hdmirx_hpd: hdmirx-5v-detection {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	headphone {
 		hp_det: hp-det {
 			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -678,6 +748,7 @@
 		spi-max-frequency = <104000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8_s3>;
 	};
 };
 
@@ -1084,9 +1155,8 @@
 };
 
 &usb_host0_xhci {
-	dr_mode = "host";
-	status = "okay";
 	usb-role-switch;
+	status = "okay";
 
 	port {
 		usb_host0_xhci_drd_sw: endpoint {
@@ -1122,3 +1192,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts b/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts
index 1c0851b45eb8..fbe1d5c06d90 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-ok3588-c.dts
@@ -312,6 +312,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	pcie2 {
 		pcie2_0_rst: pcie2-0-rst {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi
index 0f1a77697351..b5d630d2c879 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi
@@ -115,7 +115,7 @@
 		};
 	};
 
-	gpu_opp_table: opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-300000000 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
new file mode 100644
index 000000000000..9343dfc86941
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588-orangepi-5.dtsi"
+
+/ {
+	vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* USB_OTG_PWREN */
+		gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren>;
+		regulator-name = "vcc5v0_usb30_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&headphone_amp {
+	/* PHONE_CTL */
+	enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+};
+
+&analog_sound {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hp_detect>;
+	simple-audio-card,aux-devs = <&headphone_amp>;
+	simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
+
+	simple-audio-card,routing =
+		"Headphones", "LOUT1",
+		"Headphones", "ROUT1",
+		"LINPUT1", "Microphone Jack",
+		"RINPUT1", "Microphone Jack",
+		"LINPUT2", "Onboard Microphone",
+		"RINPUT2", "Onboard Microphone";
+	simple-audio-card,widgets =
+		"Microphone", "Microphone Jack",
+		"Microphone", "Onboard Microphone",
+		"Headphone", "Headphones";
+};
+
+&fan {
+	/* FAN_CTL_H */
+	pwms = <&pwm9 0 50000 0>;
+};
+
+&hym8563 {
+	interrupt-parent = <&gpio0>;
+	interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_int_l>;
+};
+
+&led_blue_pwm {
+	/* PWM_LED1 */
+	status = "okay";
+};
+
+/* phy2 */
+&pcie2x1l1 {
+	reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie_eth>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		rtc_int_l: hym8563-int {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4m0_pins>;
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm5m1_pins>;
+	status = "okay";
+};
+
+&pwm9 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm9m2_pins>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim2_pins>;
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_usb30_otg>;
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_usb20>;
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7m0_xfer &uart7m0_ctsn &uart7m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&hym8563>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wakeup";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on>, <&host_wake_bt>, <&bt_wake_host>;
+		shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc_3v3_s3>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+};
+
+/* pcie eth. not a real regulator. 33VAUX */
+&vcc3v3_pcie_eth {
+	/* Ethernet_power_en */
+	gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
+};
+
+/*
+ * Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic,
+ * both regulators share the same enable gpio
+ */
+&vcc5v0_usb20 {
+	/* USB_HOST_PWREN */
+	gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_host_pwren>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
new file mode 100644
index 000000000000..8b1d35760c3b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588-orangepi-5-compact.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 5 Max";
+	compatible = "xunlong,orangepi-5-max", "rockchip,rk3588";
+
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdmi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
+			     &hdmim1_tx1_scl &hdmim1_tx1_sda>;
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
+&led_blue_pwm {
+	pwms = <&pwm4 0 25000 0>;
+};
+
+&led_green_pwm {
+	pwms = <&pwm5 0 25000 0>;
+};
+
+&pinctrl {
+
+	usb {
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index 9f5a38b290bf..9950d1147e12 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -6,86 +6,15 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
-#include "rk3588.dtsi"
+#include "rk3588-orangepi-5.dtsi"
 
 / {
 	model = "Xunlong Orange Pi 5 Plus";
 	compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588";
 
-	aliases {
-		mmc0 = &sdhci;
-		mmc1 = &sdmmc;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	adc-keys-0 {
-		compatible = "adc-keys";
-		io-channels = <&saradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-		poll-interval = <100>;
-
-		button-maskrom {
-			label = "Mask Rom";
-			linux,code = <KEY_SETUP>;
-			press-threshold-microvolt = <2000>;
-		};
-	};
-
-	adc-keys-1 {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1800000>;
-		poll-interval = <100>;
-
-		button-recovery {
-			label = "Recovery";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <2000>;
-		};
-	};
-
-	speaker_amp: speaker-audio-amplifier {
-		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
-		sound-name-prefix = "Speaker Amp";
-	};
-
-	headphone_amp: headphones-audio-amplifier {
-		compatible = "simple-audio-amplifier";
-		enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
-		sound-name-prefix = "Headphones Amp";
-	};
-
-	ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ir_receiver_pin>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&blue_led_pin>;
-
-		led {
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
 	hdmi0-con {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -97,26 +26,24 @@
 		};
 	};
 
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		cooling-levels = <0 70 75 80 100>;
-		fan-supply = <&vcc5v0_sys>;
-		pwms = <&pwm3 0 50000 0>;
-		#cooling-cells = <2>;
-	};
-
-	pwm-leds {
-		compatible = "pwm-leds";
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
 
-		led {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <2>;
-			max-brightness = <255>;
-			pwms = <&pwm2 0 25000 0>;
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
 		};
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
 	rfkill {
 		compatible = "rfkill-gpio";
 		label = "rfkill-pcie-wlan";
@@ -124,163 +51,80 @@
 		shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
 	};
 
-	sound {
-		compatible = "simple-audio-card";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hp_detect>;
-		simple-audio-card,name = "Analog";
-		simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
-		simple-audio-card,bitclock-master = <&daicpu>;
-		simple-audio-card,frame-master = <&daicpu>;
-		/*TODO: SARADC_IN3 is used as MIC detection / key input */
-
-		simple-audio-card,widgets =
-			"Microphone", "Onboard Microphone",
-			"Microphone", "Microphone Jack",
-			"Speaker", "Speaker",
-			"Headphone", "Headphones";
-
-		simple-audio-card,routing =
-			"Headphones", "LOUT1",
-			"Headphones", "ROUT1",
-			"Speaker", "LOUT2",
-			"Speaker", "ROUT2",
-
-			"Headphones", "Headphones Amp OUTL",
-			"Headphones", "Headphones Amp OUTR",
-			"Headphones Amp INL", "LOUT1",
-			"Headphones Amp INR", "ROUT1",
-
-			"Speaker", "Speaker Amp OUTL",
-			"Speaker", "Speaker Amp OUTR",
-			"Speaker Amp INL", "LOUT2",
-			"Speaker Amp INR", "ROUT2",
-
-			/* single ended signal to LINPUT1 */
-			"LINPUT1", "Microphone Jack",
-			"RINPUT1", "Microphone Jack",
-			/* differential signal */
-			"LINPUT2", "Onboard Microphone",
-			"RINPUT2", "Onboard Microphone";
-
-		daicpu: simple-audio-card,cpu {
-			sound-dai = <&i2s0_8ch>;
-			system-clock-frequency = <12288000>;
-		};
-
-		daicodec: simple-audio-card,codec {
-			sound-dai = <&es8388>;
-			system-clock-frequency = <12288000>;
-		};
-	};
-
-	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
-		regulator-name = "vcc3v3_pcie30";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <5000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth {
-		compatible = "regulator-fixed";
-		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
-		regulator-name = "vcc3v3_pcie_eth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <50000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc3v3_wf: regulator-vcc3v3-wf {
+	vbus5v0_typec: regulator-vbus-typec {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
-		regulator-name = "vcc3v3_wf";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <50000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_sys: regulator-vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vcc5v0_usb20: regulator-vcc5v0-usb20 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_usb20_en>;
-		regulator-name = "vcc5v0_usb20";
+		pinctrl-0 = <&typec5v_pwren>;
+		regulator-name = "vbus5v0_typec";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
-&combphy0_ps {
-	status = "okay";
-};
-
-&combphy1_ps {
+&speaker_amp {
+	enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
-&combphy2_psu {
-	status = "okay";
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b2 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_b3 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
+&headphone_amp {
+	enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
 };
 
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
+&analog_sound {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hp_detect>;
+	simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
+	simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+	simple-audio-card,widgets =
+		"Microphone", "Onboard Microphone",
+		"Microphone", "Microphone Jack",
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+
+	simple-audio-card,routing =
+		"Headphones", "LOUT1",
+		"Headphones", "ROUT1",
+		"Speaker", "LOUT2",
+		"Speaker", "ROUT2",
+
+		"Headphones", "Headphones Amp OUTL",
+		"Headphones", "Headphones Amp OUTR",
+		"Headphones Amp INL", "LOUT1",
+		"Headphones Amp INR", "ROUT1",
+
+		"Speaker", "Speaker Amp OUTL",
+		"Speaker", "Speaker Amp OUTR",
+		"Speaker Amp INL", "LOUT2",
+		"Speaker Amp INR", "ROUT2",
+
+		/* single ended signal to LINPUT1 */
+		"LINPUT1", "Microphone Jack",
+		"RINPUT1", "Microphone Jack",
+		/* differential signal */
+		"LINPUT2", "Onboard Microphone",
+		"RINPUT2", "Onboard Microphone";
 };
 
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
+&combphy0_ps {
+	status = "okay";
 };
 
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
+&combphy1_ps {
+	status = "okay";
 };
 
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
+&fan {
+	pwms = <&pwm3 0 50000 0>;
 };
 
-&gpu {
-	mali-supply = <&vdd_gpu_s0>;
+&hdmi0 {
 	status = "okay";
 };
 
-&hdmi0 {
+&hdmi0_sound {
 	status = "okay";
 };
 
@@ -296,134 +140,122 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdmi1 {
 	status = "okay";
 };
 
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0m2_xfer>;
-	status = "okay";
-
-	vdd_cpu_big0_s0: regulator@42 {
-		compatible = "rockchip,rk8602";
-		reg = <0x42>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big0_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
 	};
+};
 
-	vdd_cpu_big1_s0: regulator@43 {
-		compatible = "rockchip,rk8603", "rockchip,rk8602";
-		reg = <0x43>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big1_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
 	};
 };
 
-&i2c6 {
-	clock-frequency = <400000>;
+&hdmi1_sound {
 	status = "okay";
+};
 
-	hym8563: rtc@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <0>;
-		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-		wakeup-source;
-	};
+&hdmi_receiver_cma {
+	status = "okay";
 };
 
-&i2c7 {
+&hdmi_receiver {
+	hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+	pinctrl-names = "default";
 	status = "okay";
+};
 
-	/* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
-	es8388: audio-codec@11 {
-		compatible = "everest,es8388";
-		reg = <0x11>;
-		clocks = <&cru I2S0_8CH_MCLKOUT>;
-		AVDD-supply = <&vcc_1v8_s0>;
-		DVDD-supply = <&vcc_1v8_s0>;
-		HPVDD-supply = <&vcc_3v3_s0>;
-		PVDD-supply = <&vcc_3v3_s0>;
-		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
-		assigned-clock-rates = <12288000>;
-		#sound-dai-cells = <0>;
-	};
+&hdptxphy0 {
+	status = "okay";
 };
 
-&i2s0_8ch {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2s0_lrck
-		     &i2s0_mclk
-		     &i2s0_sclk
-		     &i2s0_sdi0
-		     &i2s0_sdo0>;
+&hdptxphy1 {
 	status = "okay";
 };
 
-&i2s2_2ch {
+&hym8563 {
+	interrupt-parent = <&gpio0>;
+	interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2s2m0_lrck
-		     &i2s2m0_sclk
-		     &i2s2m0_sdi
-		     &i2s2m0_sdo>;
-	status = "okay";
+	pinctrl-0 = <&hym8563_int>;
 };
 
-&package_thermal {
-	polling-delay = <1000>;
+&i2c6 {
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&vbus5v0_typec>;
+		status = "okay";
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			power-role = "dual";
+			op-sink-microwatt = <10>;
+			source-pdos = <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 10, PDO_FIXED_USB_COMM)>;
+			try-power-role = "source";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc0_hs: endpoint {
+						remote-endpoint = <&usb_host0_xhci_drd_sw>;
+					};
+				};
 
-	cooling-maps {
-		map0 {
-			trip = <&package_fan0>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
+				port@1 {
+					reg = <1>;
 
-		map1 {
-			trip = <&package_fan1>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
+					usbc0_ss: endpoint {
+						remote-endpoint = <&usbdp_phy0_typec_ss>;
+					};
+				};
 
-	trips {
-		package_fan0: package-fan0 {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
+				port@2 {
+					reg = <2>;
 
-		package_fan1: package-fan1 {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
+					usbc0_sbu: endpoint {
+						remote-endpoint = <&usbdp_phy0_typec_sbu>;
+					};
+				};
+			};
 		};
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
+&led_blue_gpio {
+	gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&led_green_pwm {
+	pwms = <&pwm2 0 25000 0>;
+};
+
 /* phy1 - M.KEY socket */
 &pcie2x1l0 {
 	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
@@ -445,16 +277,6 @@
 	status = "okay";
 };
 
-&pcie30phy {
-	status = "okay";
-};
-
-&pcie3x4 {
-	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie30>;
-	status = "okay";
-};
-
 &pinctrl {
 	hym8563 {
 		hym8563_int: hym8563-int {
@@ -468,6 +290,12 @@
 		};
 	};
 
+	hdmirx {
+		hdmirx_hpd: hdmirx-5v-detection {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	ir-receiver {
 		ir_receiver_pin: ir-receiver-pin {
 			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -485,6 +313,16 @@
 			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb-typec {
+		usbc0_int: usbc0-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm2 {
@@ -498,434 +336,68 @@
 	status = "okay";
 };
 
-&saradc {
-	vref-supply = <&vcc_1v8_s0>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	no-sdio;
-	no-sd;
-	non-removable;
-	max-frequency = <200000000>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	no-sdio;
-	no-mmc;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_3v3_s3>;
-	vqmmc-supply = <&vccio_sd_s0>;
+&recovery_button {
 	status = "okay";
 };
 
 &sfc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&fspim1_pins>;
-	status = "okay";
+};
 
-	spi_flash: flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0x0>;
-		spi-max-frequency = <100000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <1>;
-	};
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_sys>;
 };
 
-&spi2 {
-	assigned-clocks = <&cru CLK_SPI2>;
-	assigned-clock-rates = <200000000>;
-	num-cs = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+&uart9 {
+	pinctrl-0 = <&uart9m0_xfer>;
 	status = "okay";
+};
 
-	pmic@0 {
-		compatible = "rockchip,rk806";
-		reg = <0x0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
-			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
-		spi-max-frequency = <1000000>;
-		system-power-controller;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc5-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc5v0_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc_2v0_pldo_s3>;
-		vcc12-supply = <&vcc5v0_sys>;
-		vcc13-supply = <&vdd2_ddr_s3>;
-		vcc14-supply = <&vdd2_ddr_s3>;
-		vcca-supply = <&vcc5v0_sys>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl1";
-			function = "pin_fun0";
-		};
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
 
-		rk806_dvs2_null: dvs2-null-pins {
-			pins = "gpio_pwrctrl2";
-			function = "pin_fun0";
-		};
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		rk806_dvs3_null: dvs3-null-pins {
-			pins = "gpio_pwrctrl3";
-			function = "pin_fun0";
+		usbdp_phy0_typec_ss: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_ss>;
 		};
 
-		regulators {
-			vdd_gpu_s0: dcdc-reg1 {
-				regulator-name = "vdd_gpu_s0";
-				regulator-boot-on;
-				regulator-enable-ramp-delay = <400>;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_lit_s0: dcdc-reg2 {
-				regulator-name = "vdd_cpu_lit_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_log_s0: dcdc-reg3 {
-				regulator-name = "vdd_log_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <825000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_vdenc_s0: dcdc-reg4 {
-				regulator-name = "vdd_vdenc_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <825000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_ddr_s0: dcdc-reg5 {
-				regulator-name = "vdd_ddr_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <900000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			vdd2_ddr_s3: dcdc-reg6 {
-				regulator-name = "vdd2_ddr_s3";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_2v0_pldo_s3: dcdc-reg7 {
-				regulator-name = "vdd_2v0_pldo_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <2000000>;
-				};
-			};
-
-			vcc_3v3_s3: dcdc-reg8 {
-				regulator-name = "vcc_3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vddq_ddr_s0: dcdc-reg9 {
-				regulator-name = "vddq_ddr_s0";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s3: dcdc-reg10 {
-				regulator-name = "vcc_1v8_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avcc_1v8_s0: pldo-reg1 {
-				regulator-name = "avcc_1v8_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			/* shorted to avcc_1v8_s0 on the board */
-			vcc_1v8_s0: pldo-reg2 {
-				regulator-name = "vcc_1v8_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avdd_1v2_s0: pldo-reg3 {
-				regulator-name = "avdd_1v2_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v3_s0: pldo-reg4 {
-				regulator-name = "vcc_3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_sd_s0: pldo-reg5 {
-				regulator-name = "vccio_sd_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			pldo6_s3: pldo-reg6 {
-				regulator-name = "pldo6_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_0v75_s3: nldo-reg1 {
-				regulator-name = "vdd_0v75_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_ddr_pll_s0: nldo-reg2 {
-				regulator-name = "vdd_ddr_pll_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			avdd_0v75_s0: nldo-reg3 {
-				regulator-name = "avdd_0v75_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				/*
-				 * The schematic mentions that actual setting
-				 * should be 0.8375V. RK3588 datasheet specifies
-				 * maximum as 0.825V. So we set datasheet max
-				 * here.
-				 */
-				regulator-min-microvolt = <825000>;
-				regulator-max-microvolt = <825000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v85_s0: nldo-reg4 {
-				regulator-name = "vdd_0v85_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v75_s0: nldo-reg5 {
-				regulator-name = "vdd_0v75_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
+		usbdp_phy0_typec_sbu: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usbc0_sbu>;
 		};
 	};
 };
 
-&tsadc {
-	status = "okay";
-};
-
-&u2phy2 {
-	status = "okay";
-};
-
-&u2phy3 {
-	status = "okay";
-};
-
-&u2phy2_host {
-	phy-supply = <&vcc5v0_usb20>;
-	status = "okay";
-};
-
-&u2phy3_host {
-	phy-supply = <&vcc5v0_usb20>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-0 = <&uart2m0_xfer>;
-	status = "okay";
-};
-
-&uart9 {
-	pinctrl-0 = <&uart9m0_xfer>;
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
+&usb_host0_xhci {
+	usb-role-switch;
 
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
+	port {
+		usb_host0_xhci_drd_sw: endpoint {
+			remote-endpoint = <&usbc0_hs>;
+		};
+	};
 };
 
-&usb_host1_ohci {
-	status = "okay";
+&vcc3v3_pcie_eth {
+	gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
 };
 
-&vop_mmu {
+&vcc3v3_wf {
 	status = "okay";
 };
 
-&vop {
-	status = "okay";
+&vcc5v0_usb20 {
+	gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_usb20_en>;
 };
 
 &vp0 {
@@ -934,3 +406,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts
new file mode 100644
index 000000000000..f8c6c080e418
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588-orangepi-5-compact.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 5 Ultra";
+	compatible = "xunlong,orangepi-5-ultra", "rockchip,rk3588";
+
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+};
+
+&hdmi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
+			     &hdmim1_tx1_scl &hdmim1_tx1_sda>;
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
+&led_blue_pwm {
+	pwms = <&pwm4 0 25000 PWM_POLARITY_INVERTED>;
+};
+
+&led_green_pwm {
+	pwms = <&pwm5 0 25000 PWM_POLARITY_INVERTED>;
+};
+
+&pinctrl {
+	usb {
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&vcc5v0_usb30_otg {
+	gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+};
+
+&vp0 {
+	vp0_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
new file mode 100644
index 000000000000..3bceee948458
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
@@ -0,0 +1,867 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Ondřej Jirman <megi@xff.cz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "Mask Rom";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <2000>;
+		};
+	};
+
+	recovery_button: adc-keys-1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+		status = "disabled";
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <2000>;
+		};
+	};
+
+	speaker_amp: speaker-audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "Speaker Amp";
+		status = "disabled";
+	};
+
+	headphone_amp: headphones-audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "Headphones Amp";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_blue_gpio: led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			status = "disabled";
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 70 75 80 100>;
+		fan-supply = <&vcc5v0_sys>;
+		#cooling-cells = <2>;
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led_blue_pwm: led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			linux,default-trigger = "heartbeat";
+			max-brightness = <255>;
+			status = "disabled";
+		};
+
+		led_green_pwm: led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			max-brightness = <255>;
+		};
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		label = "rfkill-pcie-wlan";
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+	};
+
+	analog_sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Analog";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,bitclock-master = <&daicpu>;
+		simple-audio-card,frame-master = <&daicpu>;
+		/*TODO: SARADC_IN3 is used as MIC detection / key input */
+
+		daicpu: simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+			system-clock-frequency = <12288000>;
+		};
+
+		daicodec: simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie_eth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_wf: regulator-vcc3v3-wf {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_wf";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+		status = "disabled";
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb20: regulator-vcc5v0-usb20 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc5v0_usb20";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m2_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		AVDD-supply = <&vcc_3v3_s0>;
+		DVDD-supply = <&vcc_1v8_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_1v8_s0>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
+&i2s2_2ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s2m0_lrck
+		     &i2s2m0_sclk
+		     &i2s2m0_sdi
+		     &i2s2m0_sdo>;
+	status = "okay";
+};
+
+&package_thermal {
+	polling-delay = <1000>;
+
+	cooling-maps {
+		map0 {
+			trip = <&package_fan0>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map1 {
+			trip = <&package_fan1>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+
+	trips {
+		package_fan0: package-fan0 {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		package_fan1: package-fan1 {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&sfc {
+	status = "okay";
+
+	spi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vdd2_ddr_s3>;
+		vcc14-supply = <&vdd2_ddr_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <825000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <825000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* shorted to avcc_1v8_s0 on the board */
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				/*
+				 * The schematic mentions that actual setting
+				 * should be 0.8375V. RK3588 datasheet specifies
+				 * maximum as 0.825V. So we set datasheet max
+				 * here.
+				 */
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <825000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb20>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb20>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	status = "okay";
+};
+
+&usbdp_phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
index 088cfade6f6f..b2336c36da01 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
@@ -311,7 +311,7 @@
 	status = "okay";
 
 	es8388: audio-codec@11 {
-		compatible = "everest,es8388";
+		compatible = "everest,es8388", "everest,es8328";
 		reg = <0x11>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
 		assigned-clock-rates = <12288000>;
@@ -347,6 +347,10 @@
 	};
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	hym8563 {
 		hym8563_int: hym8563-int {
@@ -411,6 +415,36 @@
 	status = "okay";
 };
 
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_mem_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_mem_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_mem_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcc_1v8_s0>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts b/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts
new file mode 100644
index 000000000000..2d6fed2a84a3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts
@@ -0,0 +1,1132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Firefly Technology Co. Ltd
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3588-RT";
+	compatible = "firefly,roc-rk3588-rt", "rockchip,rk3588";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	analog-sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_detect>;
+		pinctrl-names = "default";
+		simple-audio-card,aux-devs = <&amp_headphones>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <384>;
+		simple-audio-card,name = "rockchip-es8388";
+		simple-audio-card,pin-switches = "Headphones";
+		simple-audio-card,routing =
+			"Speaker", "LOUT2",
+			"Speaker", "ROUT2",
+			"Headphones Amplifier INL", "LOUT1",
+			"Headphones Amplifier INR", "ROUT1",
+			"Headphones", "Headphones Amplifier OUTL",
+			"Headphones", "Headphones Amplifier OUTR",
+			"LINPUT1", "Microphone Jack",
+			"RINPUT1", "Microphone Jack",
+			"LINPUT2", "Onboard Microphone",
+			"RINPUT2", "Onboard Microphone";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Microphone", "Onboard Microphone",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	amp_headphones: headphones-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&headphone_amplifier_en>;
+		sound-name-prefix = "Headphones Amplifier";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 70 75 80 100>;
+		#cooling-cells = <2>;
+		fan-supply = <&vcc5v0_sys>;
+		pwms = <&pwm15 0 50000 1>;
+	};
+
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		power_led {
+			gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		user_led {
+			gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	vbus5v0_typec: regulator-vbus5v0-typec {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren>;
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-name = "vcc12v_dcin";
+	};
+
+	vcc3v3_sata2: vcc3v3-sata2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_sata2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sd_s0: regulator-vcc3v3-sd-s0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_sd_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_wlan: regulator-vcc3v3-wlan {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwren>;
+		regulator-name = "vcc3v3_wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host3: regulator-vcc5v0-host3 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host3_en>;
+		regulator-name = "vcc5v0_host3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	status = "okay";
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	sram-supply = <&vdd_gpu_mem_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	/* pc9202 watchdog@3c with enable-gpio gpio0-c3 */
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+		fcs,suspend-voltage-selector = <1>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+		fcs,suspend-voltage-selector = <1>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m0_xfer>;
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		AVDD-supply = <&vcc_1v8_s0>;
+		DVDD-supply = <&vcc_1v8_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_1v8_s0>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m0_xfer>;
+
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&vbus5v0_typec>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "source";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&dwc3_0_role_switch>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					dp_altmode_mux: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_0_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>, <&pcie2_0_wake>, <&pcie2_0_clkreq>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_wlan>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_2_rst>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pinctrl {
+	audio {
+		hp_detect: headphone-detect {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		headphone_amplifier_en: headphone-amplifier-en {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-leds {
+		led_pins: led-pins {
+			rockchip,pins =
+				<1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
+				<1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_0_wake: pcie2-0-wake {
+			rockchip,pins = <4 RK_PA4 4 &pcfg_pull_none>;
+		};
+
+		pcie2_0_clkreq: pcie2-0-clkreq {
+			rockchip,pins = <4 RK_PA3 4 &pcfg_pull_none>;
+		};
+
+		pcie2_2_rst: pcie2-2-rst {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_0_rst: rtl8211f-0-rst {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		rtl8211f_1_rst: rtl8211f-1-rst {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host3_en: vcc5v0-host3-en {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc0_int: usbc0-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wlan {
+		wifi_pwren: wifi-pwren {
+			rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm15 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm15m2_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd_s0>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			avdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "avdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v85_s0: nldo-reg4 {
+				regulator-name = "avdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_host3>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host3>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dwc3_0_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_orientation_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+
+		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dp_altmode_mux>;
+		};
+	};
+};
+
+&usbdp_phy1 {
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
index 6d68f70284e4..172aeabba72a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
@@ -11,6 +11,7 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "dt-bindings/usb/pd.h"
 #include "rk3588.dtsi"
 
@@ -56,14 +57,39 @@
 			  "Headphone", "Headphones";
 	};
 
+	bridge {
+		compatible = "radxa,ra620";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hdmi_bridge_in: endpoint {
+					remote-endpoint = <&dp1_out_con>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_bridge_out: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
 
 		power-led1 {
+			default-state = "on";
 			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
 		};
 
 		hdd-led2 {
@@ -72,6 +98,28 @@
 		};
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_bridge_out>;
+			};
+		};
+	};
+
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
 	/* Unnamed gated oscillator: 100MHz,3.3V,3225 */
 	pcie30_port0_refclk: pcie30_port1_refclk: pcie-oscillator {
 		compatible = "gated-fixed-clock";
@@ -256,11 +304,55 @@
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
+&dp1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp1m0_pins>;
+};
+
+&dp1_in {
+	dp1_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_dp1>;
+	};
+};
+
+&dp1_out {
+	dp1_out_con: endpoint {
+		remote-endpoint = <&hdmi_bridge_in>;
+	};
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu_s0>;
 	status = "okay";
 };
 
+&hdmi1 {
+	pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
+		     &hdmim1_tx1_scl &hdmim1_tx1_sda>;
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -458,6 +550,11 @@
 	};
 };
 
+/* HDMI1 ("HDMI TX1 8K") audio */
+&i2s6_8ch {
+	status = "okay";
+};
+
 &package_thermal {
 	polling-delay = <1000>;
 
@@ -564,6 +661,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	hym8563 {
 		rtc_int: rtc-int {
@@ -578,6 +679,12 @@
 		};
 	};
 
+	mmc {
+		sdmmc_det_pin: sdmmc-det-pin {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pcie {
 		pcie20x1_2_perstn: pcie20x1-2-perstn {
 			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -690,10 +797,9 @@
 
 &sdhci {
 	bus-width = <8>;
-	max-frequency = <200000000>;
+	max-frequency = <150000000>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
-	mmc-hs200-1_8v;
 	no-sdio;
 	no-sd;
 	non-removable;
@@ -704,12 +810,12 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
-	max-frequency = <200000000>;
 	no-sdio;
 	no-mmc;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det_pin>;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vccio_sd_s0>;
@@ -1209,3 +1315,25 @@
 	rockchip,dp-lane-mux = <2 3>;
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
+
+&vp2 {
+	vp2_out_dp1: endpoint@b {
+		reg = <ROCKCHIP_VOP2_EP_DP1>;
+		remote-endpoint = <&dp1_in_vp2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
new file mode 100644
index 000000000000..b3e76ad2d869
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
@@ -0,0 +1,1075 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 120 150 180 210 240 255>;
+		fan-supply = <&vcc5v0_sys>;
+		pwms = <&pwm1 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	rfkill-bt {
+		compatible = "rfkill-gpio";
+		label = "rfkill-m2-bt";
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+	};
+
+	vbus5v0_typec: vbus5v0-typec {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus5v0_typec_en>;
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc3v3_pcie2x1l0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+		status = "disabled";
+	};
+
+	vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie2x1l2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie3_vcc3v3_en>;
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdmi1 {
+	pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
+		     &hdmim1_tx1_scl &hdmim1_tx1_sda>;
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdmi_receiver_cma {
+	status = "okay";
+};
+
+&hdmi_receiver {
+	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+	pinctrl-names = "default";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m2_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <500>;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		 };
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m1_xfer>;
+	status = "okay";
+
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&vbus5v0_typec>;
+		/*
+		 * When the board is starting to send power-delivery messages
+		 * too late (5 seconds according to the specification), the
+		 * power-supply reacts with a hard-reset. That removes the
+		 * power from VBUS for some time, which resets te whole board.
+		 */
+		status = "fail";
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			/* fusb302 supports PD Rev 2.0 Ver 1.2 */
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
+			op-sink-microwatt = <1000000>;
+			sink-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>,
+				<PDO_VAR(5000, 20000, 5000)>;
+			source-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			altmodes {
+				displayport {
+					svid = /bits/ 16 <0xff01>;
+					vdo = <0xffffffff>;
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_hs: endpoint {
+						remote-endpoint = <&usb_host0_xhci_to_usbc0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					usbc0_ss: endpoint {
+						remote-endpoint = <&usbdp_phy0_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					usbc0_sbu: endpoint {
+						remote-endpoint = <&usbdp_phy0_sbu>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
+&package_thermal {
+	polling-delay = <1000>;
+
+	trips {
+		package_fan0: package-fan0 {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		package_fan1: package-fan1 {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&package_fan0>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map1 {
+			trip = <&package_fan1>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_2_rst>;
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_rst>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mmc {
+		sdmmc_det_pin: sdmmc-det-pin {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_2_rst: pcie2-2-rst {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3_rst: pcie3-rst {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie3_vcc3v3_en: pcie3-vcc3v3-en {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usbc0_int: usbc0-int {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vbus5v0_typec_en: vbus5v0-typec-en {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det_pin>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim2_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_3v3_s3>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	/* connected to USB hub, which is powered by vcc5v0_sys */
+	phy-supply = <&vcc5v0_sys>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_ss: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_ss>;
+		};
+
+		usbdp_phy0_sbu: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usbc0_sbu>;
+		};
+	};
+};
+
+&usbdp_phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb_host0_xhci_to_usbc0: endpoint {
+			remote-endpoint = <&usbc0_hs>;
+		};
+	};
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-ep.dtso b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-ep.dtso
index 672d748fcc67..f229cb49da68 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-ep.dtso
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-pcie-ep.dtso
@@ -23,3 +23,7 @@
 	vpcie3v3-supply = <&vcc3v3_pcie30>;
 	status = "okay";
 };
+
+&mmu600_pcie {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
new file mode 100644
index 000000000000..07a840d9b385
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588-rock-5b.dtsi"
+
+/ {
+	model = "Radxa ROCK 5B+";
+	compatible = "radxa,rock-5b-plus", "rockchip,rk3588";
+
+	rfkill-wwan {
+		compatible = "rfkill-gpio";
+		label = "rfkill-m2-wwan";
+		radio-type = "wwan";
+		shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc3v3_4g: regulator-vcc3v3-4g {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		/* pinctrl for the GPIO is requested by vcc3v3_pcie2x1l0 */
+		regulator-name = "vcc3v3_4g";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_wwan_pwr: regulator-vcc3v3-wwan {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_power_en>;
+		regulator-name = "vcc3v3_wwan_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_4g>;
+	};
+};
+
+&gpio0 {
+	wwan-disable2-n-hog {
+		gpios = <RK_PB2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "M.2 B-key W_DISABLE2#";
+		gpio-hog;
+	};
+};
+
+&gpio2 {
+	wwan-reset-n-hog {
+		gpios = <RK_PB3 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "M.2 B-key RESET#";
+		gpio-hog;
+	};
+
+	wwan-wake-n-hog {
+		gpios = <RK_PB2 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "M.2 B-key WoWWAN#";
+		gpio-hog;
+	};
+};
+
+&pcie30phy {
+	data-lanes = <1 1 2 2>;
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3x2_rst>;
+	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pcie3x4 {
+	num-lanes = <2>;
+};
+
+&pinctrl {
+	wwan {
+		wwan_power_en: wwan-pwr-en {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3x2_rst: pcie3x2-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usbc_sbu_dc: usbc-sbu-dc {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&usb_con {
+	power-role = "dual";
+	try-power-role = "sink";
+};
+
+&usbdp_phy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbc_sbu_dc>;
+	sbu1-dc-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index c44d001da169..da13dafcbc82 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -2,462 +2,11 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/soc/rockchip,vop2.h>
-#include "rk3588.dtsi"
+#include "rk3588-rock-5b.dtsi"
 
 / {
 	model = "Radxa ROCK 5B";
 	compatible = "radxa,rock-5b", "rockchip,rk3588";
-
-	aliases {
-		mmc0 = &sdhci;
-		mmc1 = &sdmmc;
-		mmc2 = &sdio;
-	};
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	analog-sound {
-		compatible = "audio-graph-card";
-		label = "rk3588-es8316";
-
-		widgets = "Microphone", "Mic Jack",
-			  "Headphone", "Headphones";
-
-		routing = "MIC2", "Mic Jack",
-			  "Headphones", "HPOL",
-			  "Headphones", "HPOR";
-
-		dais = <&i2s0_8ch_p0>;
-		hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hp_detect>;
-	};
-
-	hdmi0-con {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi0_con_in: endpoint {
-				remote-endpoint = <&hdmi0_out_con>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_rgb_b>;
-
-		led_rgb_b {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		cooling-levels = <0 120 150 180 210 240 255>;
-		fan-supply = <&vcc5v0_sys>;
-		pwms = <&pwm1 0 50000 0>;
-		#cooling-cells = <2>;
-	};
-
-	rfkill {
-		compatible = "rfkill-gpio";
-		label = "rfkill-pcie-wlan";
-		radio-type = "wlan";
-		shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
-	};
-
-	rfkill-bt {
-		compatible = "rfkill-gpio";
-		label = "rfkill-m2-bt";
-		radio-type = "bluetooth";
-		shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
-	};
-
-	vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie2_0_vcc3v3_en>;
-		regulator-name = "vcc3v3_pcie2x1l0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <50000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_pcie2x1l2";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <5000>;
-		vin-supply = <&vcc_3v3_s3>;
-	};
-
-	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie3_vcc3v3_en>;
-		regulator-name = "vcc3v3_pcie30";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <5000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_host: regulator-vcc5v0-host {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_host";
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_sys: regulator-vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_1v1_nldo_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1100000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&combphy0_ps {
-	status = "okay";
-};
-
-&combphy1_ps {
-	status = "okay";
-};
-
-&combphy2_psu {
-	status = "okay";
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b2 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_b3 {
-	cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu_s0>;
-	status = "okay";
-};
-
-&hdmi0 {
-	status = "okay";
-};
-
-&hdmi0_in {
-	hdmi0_in_vp0: endpoint {
-		remote-endpoint = <&vp0_out_hdmi0>;
-	};
-};
-
-&hdmi0_out {
-	hdmi0_out_con: endpoint {
-		remote-endpoint = <&hdmi0_con_in>;
-	};
-};
-
-&hdptxphy_hdmi0 {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0m2_xfer>;
-	status = "okay";
-
-	vdd_cpu_big0_s0: regulator@42 {
-		compatible = "rockchip,rk8602";
-		reg = <0x42>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big0_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_cpu_big1_s0: regulator@43 {
-		compatible = "rockchip,rk8603", "rockchip,rk8602";
-		reg = <0x43>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-name = "vdd_cpu_big1_s0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <550000>;
-		regulator-max-microvolt = <1050000>;
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	hym8563: rtc@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		wakeup-source;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	es8316: audio-codec@11 {
-		compatible = "everest,es8316";
-		reg = <0x11>;
-		clocks = <&cru I2S0_8CH_MCLKOUT>;
-		clock-names = "mclk";
-		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
-		assigned-clock-rates = <12288000>;
-		#sound-dai-cells = <0>;
-
-		port {
-			es8316_p0_0: endpoint {
-				remote-endpoint = <&i2s0_8ch_p0_0>;
-			};
-		};
-	};
-};
-
-&i2s0_8ch {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2s0_lrck
-		     &i2s0_mclk
-		     &i2s0_sclk
-		     &i2s0_sdi0
-		     &i2s0_sdo0>;
-	status = "okay";
-
-	i2s0_8ch_p0: port {
-		i2s0_8ch_p0_0: endpoint {
-			dai-format = "i2s";
-			mclk-fs = <256>;
-			remote-endpoint = <&es8316_p0_0>;
-		};
-	};
-};
-
-&package_thermal {
-	polling-delay = <1000>;
-
-	trips {
-		package_fan0: package-fan0 {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		package_fan1: package-fan1 {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-
-	cooling-maps {
-		map0 {
-			trip = <&package_fan0>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map1 {
-			trip = <&package_fan1>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
-};
-
-&pcie2x1l0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie2_0_rst>;
-	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
-	status = "okay";
-};
-
-&pcie2x1l2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie2_2_rst>;
-	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
-	status = "okay";
-};
-
-&pcie30phy {
-	status = "okay";
-};
-
-&pcie3x4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie3_rst>;
-	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
-	vpcie3v3-supply = <&vcc3v3_pcie30>;
-	status = "okay";
-};
-
-&pinctrl {
-	hym8563 {
-		hym8563_int: hym8563-int {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	leds {
-		led_rgb_b: led-rgb-b {
-			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sound {
-		hp_detect: hp-detect {
-			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie2 {
-		pcie2_0_rst: pcie2-0-rst {
-			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
-			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie2_2_rst: pcie2-2-rst {
-			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie3 {
-		pcie3_rst: pcie3-rst {
-			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie3_vcc3v3_en: pcie3-vcc3v3-en {
-			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&avcc_1v8_s0>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	no-sdio;
-	no-sd;
-	non-removable;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	status = "okay";
-};
-
-&sdmmc {
-	max-frequency = <200000000>;
-	no-sdio;
-	no-mmc;
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_3v3_s3>;
-	vqmmc-supply = <&vccio_sd_s0>;
-	status = "okay";
 };
 
 &sdio {
@@ -481,427 +30,39 @@
 	status = "okay";
 };
 
-&sfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&fspim2_pins>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <1>;
-	};
-};
-
 &uart6 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
 	status = "okay";
 };
 
-&spi2 {
-	status = "okay";
-	assigned-clocks = <&cru CLK_SPI2>;
-	assigned-clock-rates = <200000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
-	num-cs = <1>;
-
-	pmic@0 {
-		compatible = "rockchip,rk806";
-		spi-max-frequency = <1000000>;
-		reg = <0x0>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
-			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
-
-		system-power-controller;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc5-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc5v0_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc_2v0_pldo_s3>;
-		vcc12-supply = <&vcc5v0_sys>;
-		vcc13-supply = <&vcc_1v1_nldo_s3>;
-		vcc14-supply = <&vcc_1v1_nldo_s3>;
-		vcca-supply = <&vcc5v0_sys>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl1";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs2_null: dvs2-null-pins {
-			pins = "gpio_pwrctrl2";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs3_null: dvs3-null-pins {
-			pins = "gpio_pwrctrl3";
-			function = "pin_fun0";
+&pinctrl {
+	usb {
+		usbc_sbu_dc: usbc-sbu-dc {
+			rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		regulators {
-			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_gpu_s0";
-				regulator-enable-ramp-delay = <400>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_cpu_lit_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_log_s0: dcdc-reg3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <750000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_log_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_vdenc_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_ddr_s0: dcdc-reg5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <900000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_ddr_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			vdd2_ddr_s3: dcdc-reg6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vdd2_ddr_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_2v0_pldo_s3: dcdc-reg7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vdd_2v0_pldo_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <2000000>;
-				};
-			};
-
-			vcc_3v3_s3: dcdc-reg8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_3v3_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vddq_ddr_s0: dcdc-reg9 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vddq_ddr_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s3: dcdc-reg10 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_1v8_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avcc_1v8_s0: pldo-reg1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "avcc_1v8_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s0: pldo-reg2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_1v8_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avdd_1v2_s0: pldo-reg3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-name = "avdd_1v2_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v3_s0: pldo-reg4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vcc_3v3_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_sd_s0: pldo-reg5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-				regulator-name = "vccio_sd_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			pldo6_s3: pldo-reg6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "pldo6_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_0v75_s3: nldo-reg1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-				regulator-name = "vdd_0v75_s3";
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_ddr_pll_s0: nldo-reg2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-				regulator-name = "vdd_ddr_pll_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			avdd_0v75_s0: nldo-reg3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-				regulator-name = "avdd_0v75_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v85_s0: nldo-reg4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-				regulator-name = "vdd_0v85_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v75_s0: nldo-reg5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-				regulator-name = "vdd_0v75_s0";
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
 
-&tsadc {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-0 = <&uart2m0_xfer>;
-	status = "okay";
-};
-
-&u2phy1 {
-	status = "okay";
-};
-
-&u2phy1_otg {
-	status = "okay";
+&usb_con {
+	power-role = "sink";
 };
 
-&u2phy2 {
-	status = "okay";
-};
-
-&u2phy2_host {
-	/* connected to USB hub, which is powered by vcc5v0_sys */
-	phy-supply = <&vcc5v0_sys>;
-	status = "okay";
-};
-
-&u2phy3 {
-	status = "okay";
-};
-
-&u2phy3_host {
-	phy-supply = <&vcc5v0_host>;
-	status = "okay";
-};
-
-&usbdp_phy1 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usb_host1_xhci {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb_host2_xhci {
-	status = "okay";
-};
-
-&vop_mmu {
-	status = "okay";
-};
-
-&vop {
-	status = "okay";
+&usbdp_phy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbc_sbu_dc>;
+	sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
 };
 
-&vp0 {
-	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-		remote-endpoint = <&hdmi0_in_vp0>;
-	};
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
new file mode 100644
index 000000000000..e5c474e4d02a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588-rock-5b-5bp-5t.dtsi"
+
+/ {
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+		hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_rgb_b>;
+
+		led_rgb_b {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		label = "rfkill-m2-wlan";
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&hdmi_receiver {
+	hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	hdmirx {
+		hdmirx_hpd: hdmirx-5v-detection {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_rgb_b: led-rgb-b {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie2 {
+		pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&usb_host2_xhci {
+	status = "okay";
+};
+
+&vcc3v3_pcie2x1l0 {
+	gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_vcc3v3_en>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
new file mode 100644
index 000000000000..0dd90c744380
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588-rock-5b-5bp-5t.dtsi"
+
+/ {
+	model = "Radxa ROCK 5T";
+	compatible = "radxa,rock-5t", "rockchip,rk3588";
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+		"Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+		"Headphones", "HPOL",
+		"Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+		hp-det-gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_rgb_b>;
+
+		led_rgb_b {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		label = "rfkill-m2-wlan";
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc3v3_pcie2x1l1: regulator-vcc3v3-pcie2x1l2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie2x1l1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+};
+
+&hdmi_receiver {
+	hpd-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie2x1l1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_1_rst>;
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l1>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 1 2 2>;
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3x2_rst>;
+	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pcie3x4 {
+	num-lanes = <2>;
+};
+
+&pinctrl {
+	hdmirx {
+		hdmirx_hpd: hdmirx-5v-detection {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_rgb_b: led-rgb-b {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie2 {
+		pcie2_1_rst: pcie2-1-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3x2_rst: pcie3x2-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc_sbu_dc: usbc-sbu-dc {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&usb_con {
+	power-role = "source";
+};
+
+&usbdp_phy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbc_sbu_dc>;
+	sbu1-dc-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc3v3_pcie2x1l0 {
+	gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_vcc3v3_en>;
+	status = "okay";
+};
+
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso
new file mode 100644
index 000000000000..b8636fcb4f39
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Cherry Embedded Solutions GmbH
+ *
+ * DEVKIT ADDON CAM-TS-A01
+ * https://embedded.cherry.de/product/development-kit/
+ *
+ * DT-overlay for the camera / DSI demo appliance for Haikou boards.
+ * In the flavour for use with a Tiger system-on-module.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+
+&{/} {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&dc_12v>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	vcc1v8_video: regulator-vcc1v8-video {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8-video";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	vcc2v8_video: regulator-vcc2v8-video {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc2v8-video";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	video-adapter-leds {
+		compatible = "gpio-leds";
+
+		video-adapter-led {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pca9670 7 GPIO_ACTIVE_HIGH>;
+			label = "video-adapter-led";
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3148w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc1v8_video>;
+		reset-gpios = <&pca9670 0 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc2v8_video>;
+
+		port {
+			mipi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi0_in {
+	dsi0_in_vp3: endpoint {
+		remote-endpoint = <&vp3_out_dsi0>;
+	};
+};
+
+&dsi0_out {
+	dsi0_out_panel: endpoint {
+		remote-endpoint = <&mipi_panel_in>;
+	};
+};
+
+&i2c6 {
+	/* OV5675, GT911, DW9714 are limited to 400KHz */
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int>;
+		reset-gpios = <&pca9670 1 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&vcc2v8_video>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+	};
+
+	pca9670: gpio@27 {
+		compatible = "nxp,pca9670";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pca9670_resetn>;
+		reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mipidcphy0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pca9670 {
+		pca9670_resetn: pca9670-resetn {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touch {
+		touch_int: touch-int {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&vp3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	vp3_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
index 3187b4918a30..caa43d1abf17 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
@@ -189,7 +189,11 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
 	status = "okay";
 };
 
@@ -228,6 +232,10 @@
 	status = "okay";
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &pcie30phy {
 	status = "okay";
 };
@@ -310,8 +318,10 @@
 	status = "okay";
 };
 
+/* DB9 RS232/RS485 when SW2 in "UART1" mode */
 &uart5 {
 	rts-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
 };
 
 &usbdp_phy0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
index 81a6a05ce13b..365c1d958f2d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include "rk8xx.h"
 #include "rk3588.dtsi"
 
 / {
@@ -173,7 +174,6 @@
 
 &i2c2 {
 	pinctrl-0 = <&i2c2m3_xfer>;
-	status = "okay";
 };
 
 &i2c2m3_xfer {
@@ -336,6 +336,10 @@
 	reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	emmc {
 		emmc_reset: emmc-reset {
@@ -378,15 +382,12 @@
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	no-sdio;
 	no-sd;
 	non-removable;
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
-	supports-cqe;
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
@@ -438,6 +439,7 @@
 		vcc13-supply = <&vcc_1v1_nldo_s3>;
 		vcc14-supply = <&vcc_1v1_nldo_s3>;
 		vcca-supply = <&vcc5v0_sys>;
+		rockchip,reset-mode = <RK806_RESTART>;
 
 		rk806_dvs1_null: dvs1-null-pins {
 			pins = "gpio_pwrctrl1";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts
index 3cbee5b97470..5a428e00ab93 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts
@@ -289,6 +289,10 @@
 	};
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	rtl8211f {
 		rtl8211f_rst: rtl8211f-rst {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
index 6bc46734cc14..6daea8961fdd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
@@ -214,6 +214,8 @@
 };
 
 &package_thermal {
+	polling-delay = <1000>;
+
 	trips {
 		package_active1: trip-active1 {
 			temperature = <45000>;
@@ -287,6 +289,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	fan {
 		fan_int: fan-int {
@@ -392,17 +398,6 @@
 
 		regulators {
 			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
-				/*
-				 * RK3588's GPU power domain cannot be enabled
-				 * without this regulator active, but it
-				 * doesn't have to be on when the GPU PD is
-				 * disabled.  Because the PD binding does not
-				 * currently allow us to express this
-				 * relationship, we have no choice but to do
-				 * this instead:
-				 */
-				regulator-always-on;
-
 				regulator-boot-on;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <950000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
index bce72bac4503..e1e0e3fc0ca7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
@@ -11,20 +11,15 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-1416000000 {
-			opp-hz = /bits/ 64 <1416000000>;
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <750000 750000 950000>;
 			clock-latency-ns = <40000>;
 			opp-suspend;
 		};
-		opp-1608000000 {
-			opp-hz = /bits/ 64 <1608000000>;
-			opp-microvolt = <887500 887500 950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp-1704000000 {
-			opp-hz = /bits/ 64 <1704000000>;
-			opp-microvolt = <937500 937500 950000>;
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <775000 775000 950000>;
 			clock-latency-ns = <40000>;
 		};
 	};
@@ -33,9 +28,14 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <750000 750000 950000>;
+			clock-latency-ns = <40000>;
+		};
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <750000 750000 950000>;
+			opp-microvolt = <762500 762500 950000>;
 			clock-latency-ns = <40000>;
 		};
 		opp-1608000000 {
@@ -43,25 +43,20 @@
 			opp-microvolt = <787500 787500 950000>;
 			clock-latency-ns = <40000>;
 		};
-		opp-1800000000 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <875000 875000 950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp-2016000000 {
-			opp-hz = /bits/ 64 <2016000000>;
-			opp-microvolt = <950000 950000 950000>;
-			clock-latency-ns = <40000>;
-		};
 	};
 
 	cluster2_opp_table: opp-table-cluster2 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <750000 750000 950000>;
+			clock-latency-ns = <40000>;
+		};
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <750000 750000 950000>;
+			opp-microvolt = <762500 762500 950000>;
 			clock-latency-ns = <40000>;
 		};
 		opp-1608000000 {
@@ -69,19 +64,9 @@
 			opp-microvolt = <787500 787500 950000>;
 			clock-latency-ns = <40000>;
 		};
-		opp-1800000000 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <875000 875000 950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp-2016000000 {
-			opp-hz = /bits/ 64 <2016000000>;
-			opp-microvolt = <950000 950000 950000>;
-			clock-latency-ns = <40000>;
-		};
 	};
 
-	gpu_opp_table: opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-300000000 {
@@ -104,10 +89,6 @@
 			opp-hz = /bits/ 64 <700000000>;
 			opp-microvolt = <750000 750000 850000>;
 		};
-		opp-850000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <787500 787500 850000>;
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
index 9c394f733bbf..189444d20779 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
@@ -39,6 +39,18 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
+	dp-con {
+		compatible = "dp-connector";
+		label = "DP OUT";
+		type = "mini";
+
+		port {
+			dp_con_in: endpoint {
+				remote-endpoint = <&dp0_out_con>;
+			};
+		};
+	};
+
 	hdmi-con {
 		compatible = "hdmi-connector";
 		type = "d";
@@ -215,6 +227,24 @@
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
+&dp0 {
+	pinctrl-0 = <&dp0m0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&dp0_in {
+	dp0_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_dp0>;
+	};
+};
+
+&dp0_out {
+	dp0_out_con: endpoint {
+		remote-endpoint = <&dp_con_in>;
+	};
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu_s0>;
 	status = "okay";
@@ -236,7 +266,7 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdptxphy0 {
 	status = "okay";
 };
 
@@ -361,6 +391,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	hym8563 {
 		hym8563_int: hym8563-int {
@@ -429,7 +463,7 @@
 };
 
 &pwm13 {
-	pinctrl-names = "active";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pwm13m2_pins>;
 	status = "okay";
 };
@@ -470,6 +504,7 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;
@@ -803,6 +838,14 @@
 	status = "okay";
 };
 
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
@@ -832,6 +875,16 @@
 	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
 };
 
+&usbdp_phy0 {
+	/*
+	 * USBDP PHY0 is wired to a USB3 Type-A OTG connector. Additionally
+	 * the differential pairs 0+1 and the aux channel are wired to a
+	 * mini DP connector.
+	 */
+	rockchip,dp-lane-mux = <0 1>;
+	status = "okay";
+};
+
 &usb_host0_ehci {
 	status = "okay";
 };
@@ -840,6 +893,11 @@
 	status = "okay";
 };
 
+&usb_host0_xhci {
+	extcon = <&u2phy0>;
+	status = "okay";
+};
+
 &usb_host1_ehci {
 	status = "okay";
 };
@@ -862,3 +920,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp2 {
+	vp2_out_dp0: endpoint@a {
+		reg = <ROCKCHIP_VOP2_EP_DP0>;
+		remote-endpoint = <&dp0_in_vp2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
index bc4077575beb..f82050597ab3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588s.dtsi"
 
@@ -238,11 +239,47 @@
 	status = "okay";
 };
 
+&edp0 {
+	force-hpd;
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			backlight = <&backlight>;
+			power-supply = <&vcc3v3_lcd_edp>;
+			no-hpd;
+
+			port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&edp0_in {
+	edp0_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_edp0>;
+	};
+};
+
+&edp0_out {
+	edp_out_panel: endpoint {
+		remote-endpoint = <&panel_in_edp>;
+	};
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
 &i2c3 {
 	status = "okay";
 
 	es8388: audio-codec@11 {
-		compatible = "everest,es8388";
+		compatible = "everest,es8388", "everest,es8328";
 		reg = <0x11>;
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
@@ -340,6 +377,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	audio {
 		hp_detect: headphone-detect {
@@ -399,6 +440,7 @@
 };
 
 &pwm12 {
+	pinctrl-0 = <&pwm12m1_pins>;
 	status = "okay";
 };
 
@@ -423,7 +465,6 @@
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
-	max-frequency = <150000000>;
 	no-mmc;
 	no-sdio;
 	sd-uhs-sdr104;
@@ -1168,3 +1209,20 @@
 		};
 	};
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP2_SRC>;
+	assigned-clock-parents = <&cru PLL_V0PLL>;
+	status = "okay";
+};
+
+&vp2 {
+	vp2_out_edp0: endpoint@ROCKCHIP_VOP2_EP_EDP0 {
+		reg = <ROCKCHIP_VOP2_EP_EDP0>;
+		remote-endpoint = <&edp0_in_vp2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
index 812bba0aef1a..21eb003198fe 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
@@ -7,6 +7,7 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588s.dtsi"
@@ -456,6 +457,42 @@
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "huiling,hl055fhav028c", "himax,hx8399c";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc3v3_lcd0_n>;
+		pinctrl-0 = <&lcd_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		rotation = <90>;
+		vcc-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi0_in {
+	dsi0_in_vp3: endpoint {
+		remote-endpoint = <&vp3_out_dsi0>;
+	};
+};
+
+&dsi0_out {
+	dsi0_out_panel: endpoint {
+		remote-endpoint = <&mipi_panel_in>;
+	};
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu_s0>;
 	status = "okay";
@@ -575,6 +612,56 @@
 	pinctrl-0 = <&i2c6m3_xfer>;
 	status = "okay";
 
+	fusb302: typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PC7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&usbc0_int>;
+		pinctrl-names = "default";
+		vbus-supply = <&usb_otg_vbus>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&dwc3_0_role_switch>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					dp_altmode_mux: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					};
+				};
+			};
+		};
+	};
+
 	rtc_hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
@@ -603,15 +690,41 @@
 			 0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>;
 		cellwise,monitor-interval-ms = <5000>;
 		monitored-battery = <&battery>;
+		power-supplies = <&bq25703>;
 		status = "okay";
 	};
+
+	bq25703: charger@6b {
+		compatible = "ti,bq25703a";
+		reg = <0x6b>;
+		input-current-limit-microamp = <5000000>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD5 IRQ_TYPE_LEVEL_LOW>;
+		monitored-battery = <&battery>;
+		pinctrl-0 = <&charger_int_h>;
+		pinctrl-names = "default";
+		power-supplies = <&fusb302>;
+
+		regulators {
+			usb_otg_vbus: vbus {
+				enable-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+				pinctrl-0 = <&boost_enable_h>;
+				pinctrl-names = "default";
+				regulator-max-microamp = <960000>;
+				regulator-max-microvolt = <5088000>;
+				regulator-min-microamp = <512000>;
+				regulator-min-microvolt = <4992000>;
+				regulator-name = "usb_otg_vbus";
+			};
+		};
+	};
 };
 
 &i2c7 {
 	status = "okay";
 
 	es8388: audio-codec@11 {
-		compatible = "everest,es8388";
+		compatible = "everest,es8388", "everest,es8328";
 		reg = <0x11>;
 		assigned-clock-rates = <12288000>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
@@ -633,6 +746,10 @@
 	status = "okay";
 };
 
+&mipidcphy0 {
+	status = "okay";
+};
+
 &package_thermal {
 	polling-delay = <1000>;
 
@@ -675,6 +792,14 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
 &pinctrl {
 	audio-amplifier {
 		headphone_amplifier_en: headphone-amplifier-en {
@@ -758,11 +883,16 @@
 		};
 	};
 
-	lcd_bl_en {
+	lcd {
 		lcd_bl_en: lcd-bl-en {
 			rockchip,pins =
 				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
+
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	pcie-pins {
@@ -803,6 +933,12 @@
 			rockchip,pins =
 				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
+
+		usbc_sbu_dc: usbc-sbu-dc {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	vcc3v3-lcd {
@@ -847,6 +983,36 @@
 	status = "okay";
 };
 
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcc_1v8_s0>;
 	status = "okay";
@@ -1235,3 +1401,61 @@
 		shutdown-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&usb_host0_xhci {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dwc3_0_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	pinctrl-0 = <&usbc_sbu_dc>;
+	pinctrl-names = "default";
+	sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_orientation_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+
+		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dp_altmode_mux>;
+		};
+	};
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	vp3_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index 4a3aa80f2226..174d299cc6bb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -11,6 +11,7 @@
 
 / {
 	model = "Indiedroid Nova";
+	chassis-type = "embedded";
 	compatible = "indiedroid,nova", "rockchip,rk3588s";
 
 	adc-keys-0 {
@@ -189,6 +190,22 @@
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
+&dp0 {
+	status = "okay";
+};
+
+&dp0_in {
+	dp0_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_dp0>;
+	};
+};
+
+&dp0_out {
+	dp0_out_con: endpoint {
+		remote-endpoint = <&usbdp_phy0_dp_in>;
+	};
+};
+
 /*
  * Add labels for each GPIO pin exposed on the 40 pin header. Note that
  * voltage of each GPIO pin could be either 3.3v or 1.8v (as noted by
@@ -278,7 +295,11 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
 	status = "okay";
 };
 
@@ -366,28 +387,36 @@
 			sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
 			op-sink-microwatt = <1000000>;
 
+			altmodes {
+				displayport {
+					svid = /bits/ 16 <0xff01>;
+					vdo = <0xffffffff>;
+				};
+			};
+
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
 				port@0 {
 					reg = <0>;
-					usbc0_orien_sw: endpoint {
-						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					usbc0_hs: endpoint {
+						remote-endpoint = <&usb_host0_xhci_hs>;
 					};
 				};
 
 				port@1 {
 					reg = <1>;
-					usbc0_role_sw: endpoint {
-						remote-endpoint = <&dwc3_0_role_switch>;
+					usbc0_ss: endpoint {
+						remote-endpoint = <&usbdp_phy0_ss_out>;
 					};
 				};
 
 				port@2 {
 					reg = <2>;
-					dp_altmode_mux: endpoint {
-						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					usbc0_sbu: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_out>;
 					};
 				};
 			};
@@ -401,7 +430,7 @@
 		clock-output-names = "hym8563";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&hym8563_int>;
+		pinctrl-0 = <&hym8563_int>, <&clk32k_in>;
 		pinctrl-names = "default";
 		wakeup-source;
 	};
@@ -412,7 +441,7 @@
 	status = "okay";
 
 	es8388: audio-codec@11 {
-		compatible = "everest,es8388";
+		compatible = "everest,es8388", "everest,es8328";
 		reg = <0x11>;
 		assigned-clock-rates = <12288000>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
@@ -449,12 +478,27 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &pcie2x1l2 {
-	pinctrl-0 = <&rtl8111_perstb>;
+	pinctrl-0 = <&pcie20x1m0_perstn>, <&pcie20x1m0_clkreqn>,
+		    <&pcie20x1m0_waken>;
 	pinctrl-names = "default";
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
 &pinctrl {
 	bluetooth-pins {
 		bt_reset: bt-reset {
@@ -473,12 +517,6 @@
 		};
 	};
 
-	ethernet-pins {
-		rtl8111_perstb: rtl8111-perstb {
-			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
 	hym8563 {
 
 		hym8563_int: hym8563-int {
@@ -487,13 +525,6 @@
 		};
 	};
 
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins =
-				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	usb-typec {
 		usbc0_int: usbc0-int {
 			rockchip,pins =
@@ -505,6 +536,48 @@
 				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
 };
 
 &saradc {
@@ -512,10 +585,10 @@
 	status = "okay";
 };
 
-/* HS400 modes seemed to cause io errors. */
 &sdhci {
 	bus-width = <8>;
-	no-mmc-hs400;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
 	no-sd;
 	no-sdio;
 	non-removable;
@@ -525,6 +598,7 @@
 };
 
 &sdio {
+	#address-cells = <1>;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
@@ -536,9 +610,19 @@
 	no-sd;
 	non-removable;
 	sd-uhs-sdr104;
+	#size-cells = <0>;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+		pinctrl-0 = <&wifi_host_wake_irq>;
+		pinctrl-names = "default";
+	};
 };
 
 &sdmmc {
@@ -884,12 +968,9 @@
 	status = "okay";
 };
 
-/* DMA seems to interfere with bluetooth device normal operation. */
 &uart9 {
 	pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>;
 	pinctrl-names = "default";
-	/delete-property/ dma-names;
-	/delete-property/ dmas;
 	uart-has-rtscts;
 	status = "okay";
 
@@ -916,9 +997,22 @@
 	usb-role-switch;
 	status = "okay";
 
-	port {
-		dwc3_0_role_switch: endpoint {
-			remote-endpoint = <&usbc0_role_sw>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb_host0_xhci_hs: endpoint {
+				remote-endpoint = <&usbc0_hs>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			usb_host0_xhci_ss: endpoint {
+				remote-endpoint = <&usbdp_phy0_ss_in>;
+			};
 		};
 	};
 };
@@ -947,14 +1041,24 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		usbdp_phy0_orientation_switch: endpoint@0 {
+		usbdp_phy0_ss_out: endpoint@0 {
 			reg = <0>;
-			remote-endpoint = <&usbc0_orien_sw>;
+			remote-endpoint = <&usbc0_ss>;
 		};
 
-		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+		usbdp_phy0_ss_in: endpoint@1 {
 			reg = <1>;
-			remote-endpoint = <&dp_altmode_mux>;
+			remote-endpoint = <&usb_host0_xhci_ss>;
+		};
+
+		usbdp_phy0_dp_in: endpoint@2 {
+			reg = <2>;
+			remote-endpoint = <&dp0_out_con>;
+		};
+
+		usbdp_phy0_dp_out: endpoint@3 {
+			reg = <3>;
+			remote-endpoint = <&usbc0_sbu>;
 		};
 	};
 };
@@ -973,3 +1077,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp1 {
+	vp1_out_dp0: endpoint@a {
+		reg = <ROCKCHIP_VOP2_EP_DP0>;
+		remote-endpoint = <&dp0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index ac48e7fd3923..2c22abaf40a8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -6,6 +6,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588s.dtsi"
 
 / {
@@ -42,6 +43,17 @@
 		pinctrl-0 = <&ir_receiver_pin>;
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "pwm-leds";
 
@@ -181,6 +193,34 @@
 	status = "okay";
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -233,6 +273,14 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	vdd_sd {
 		vdd_sd_en: vdd-sd-en {
@@ -693,8 +741,24 @@
 
 &uart9 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&hym8563>;
+		clock-names = "lpo";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+		device-wakeup-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_wake_host_irq &bt_wake_pin &bt_reset_pin>;
+		vbat-supply = <&vcc_3v3_s3>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
 };
 
 &u2phy2 {
@@ -734,3 +798,18 @@
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
index 76a6e8e517e9..1b6a59f7cabc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
@@ -251,7 +251,11 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
 	status = "okay";
 };
 
@@ -335,6 +339,10 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &mdio1 {
 	rgmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-id001c.c916";
@@ -359,6 +367,14 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
 &pinctrl {
 	gpio-key {
 		key1_pin: key1-pin {
@@ -417,6 +433,36 @@
 	};
 };
 
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&avcc_1v8_s0>;
 	status = "okay";
@@ -434,6 +480,7 @@
 &sdmmc {
 	bus-width = <4>;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-mmc;
@@ -774,6 +821,15 @@
 	status = "okay";
 };
 
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg0>;
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
@@ -796,6 +852,15 @@
 	status = "okay";
 };
 
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	status = "okay";
+};
+
 &vop {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts
index 8f034c6d494c..a72063c55140 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts
@@ -264,7 +264,7 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdptxphy0 {
 	status = "okay";
 };
 
@@ -433,6 +433,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	lcd {
 		lcd_pwren: lcd-pwren {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
index ad6d04793b0a..83b9b6645a1e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -14,8 +14,8 @@
 		gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
 		regulator-name = "vcc3v3_pcie20";
 		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 		startup-delay-us = <50000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
index d86aeacca238..dafad29f9854 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
@@ -42,9 +42,8 @@
 		simple-audio-card,bitclock-master = <&masterdai>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&masterdai>;
-		simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,pin-switches = "Headphones";
 		simple-audio-card,routing =
 			"Headphones", "LOUT1",
 			"Headphones", "ROUT1",
@@ -197,7 +196,11 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
 	status = "okay";
 };
 
@@ -268,7 +271,7 @@
 	status = "okay";
 
 	es8388: audio-codec@10 {
-		compatible = "everest,es8388";
+		compatible = "everest,es8388", "everest,es8328";
 		reg = <0x10>;
 		clocks = <&cru I2S1_8CH_MCLKOUT>;
 		AVDD-supply = <&vcc_3v3_s0>;
@@ -355,6 +358,10 @@
 	status = "okay";
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &mdio1 {
 	rgmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -365,6 +372,14 @@
 	};
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
 &pinctrl {
 	hym8563 {
 		hym8563_int: hym8563-int {
@@ -395,6 +410,36 @@
 	status = "okay";
 };
 
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&avcc_1v8_s0>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts
new file mode 100644
index 000000000000..7e179862da6e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts
@@ -0,0 +1,840 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Firefly Station M3";
+	compatible = "firefly,rk3588s-roc-pc", "rockchip,rk3588s";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	analog-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+		simple-audio-card,name = "rockchip,es8388";
+		simple-audio-card,bitclock-master = <&masterdai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&masterdai>;
+		simple-audio-card,hp-det-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,pin-switches = "Headphones";
+		simple-audio-card,routing =
+			"Headphones", "LOUT1",
+			"Headphones", "ROUT1",
+			"LINPUT1", "Microphone Jack",
+			"RINPUT1", "Microphone Jack",
+			"LINPUT2", "Onboard Microphone",
+			"RINPUT2", "Onboard Microphone";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Microphone", "Onboard Microphone",
+			"Headphone", "Headphones";
+
+		masterdai: simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	fan: fan {
+		compatible = "pwm-fan";
+		cooling-levels = <60 100 140 160 185 220 255>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm11 0 50000 1>;
+		#cooling-cells = <2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vbus5v0_typec: regulator-vbus5v0-typec {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren>;
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_pcie20";
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2m0_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x11>;
+		clocks = <&cru I2S1_8CH_MCLKOUT>;
+		AVDD-supply = <&vcc_3v3_s0>;
+		DVDD-supply = <&vcc_1v8_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		assigned-clocks = <&cru I2S1_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1l1 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie20>;
+	status = "okay";
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_pins: led-pins {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
+					<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211 {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm11 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm11m3_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-0 = <&uart7m2_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&u2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index 70a43432bdc5..045a853d39ec 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -58,6 +58,13 @@
 			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
+
+		power-led {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		};
 	};
 
 	fan: pwm-fan {
@@ -221,6 +228,13 @@
 			regulator-off-in-suspend;
 		};
 	};
+
+	eeprom: eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		vcc-supply = <&vcc_3v3_pmu>;
+	};
 };
 
 &i2c2 {
@@ -242,12 +256,6 @@
 			regulator-off-in-suspend;
 		};
 	};
-
-	eeprom: eeprom@50 {
-		compatible = "belling,bl24c16a", "atmel,24c16";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
 };
 
 &i2c3 {
@@ -334,7 +342,7 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdptxphy0 {
 	status = "okay";
 };
 
@@ -359,6 +367,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	leds {
 		io_led: io-led {
@@ -366,6 +378,12 @@
 		};
 	};
 
+	mmc {
+		sdmmc_det_pin: sdmmc-det-pin {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pcie {
 		pow_en: pow-en {
 			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -425,6 +443,8 @@
 	max-frequency = <150000000>;
 	no-sdio;
 	no-mmc;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det_pin>;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s0>;
 	vqmmc-supply = <&vccio_sd_s0>;
@@ -589,7 +609,7 @@
 				};
 			};
 
-			vcc_3v3_s3: dcdc-reg8 {
+			vcc_3v3_pmu: vcc_3v3_s3: dcdc-reg8 {
 				regulator-name = "vcc_3v3_s3";
 				regulator-always-on;
 				regulator-boot-on;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
index 9b14d5383cdc..b837c4e08cec 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts
@@ -68,10 +68,10 @@
 		};
 	};
 
-	fan {
+	fan: fan {
 		compatible = "pwm-fan";
 		#cooling-cells = <2>;
-		cooling-levels = <0 64 128 192 255>;
+		cooling-levels = <0 24 44 64 128 192 255>;
 		fan-supply = <&vcc_5v0>;
 		pwms = <&pwm3 0 10000 0>;
 	};
@@ -278,7 +278,7 @@
 	};
 };
 
-&hdptxphy_hdmi0 {
+&hdptxphy0 {
 	status = "okay";
 };
 
@@ -417,6 +417,36 @@
 	};
 };
 
+&package_thermal {
+	polling-delay = <1000>;
+
+	trips {
+		package_fan0: package-fan0 {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		package_fan1: package-fan1 {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&package_fan0>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map1 {
+			trip = <&package_fan1>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &pcie2x1l2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie20x1_2_perstn_m0>;
@@ -425,6 +455,10 @@
 	status = "okay";
 };
 
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
 &pinctrl {
 	leds {
 		led_pins: led-pins {
@@ -439,6 +473,12 @@
 		};
 	};
 
+	mmc {
+		sdmmc_det_pin: sdmmc-det-pin {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pcie {
 		pcie20x1_2_perstn_m0: pcie20x1-2-perstn-m0 {
 			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -499,9 +539,12 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	no-sdio;
 	no-mmc;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det_pin>;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vccio_sd_s0>;
@@ -843,6 +886,8 @@
 };
 
 &tsadc {
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk8xx.h b/arch/arm64/boot/dts/rockchip/rk8xx.h
new file mode 100644
index 000000000000..a6fbef71c064
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk8xx.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) */
+/*
+ * Device Tree defines for Rockchip RK8xx PMICs
+ *
+ * Copyright 2025 Cherry Embedded Solutions GmbH
+ *
+ * Author: Quentin Schulz <quentin.schulz@cherry.de>
+ */
+
+#ifndef _DT_MFD_ROCKCHIP_RK8XX_H
+#define _DT_MFD_ROCKCHIP_RK8XX_H
+
+/* For use with rockchip,reset-mode property */
+#define RK806_RESTART		0
+#define RK806_RESET		1
+#define RK806_RESET_NOTIFY	2
+
+#endif
diff --git a/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
index 5c645437b507..b0475b7c655a 100644
--- a/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
@@ -333,6 +333,41 @@
 	};
 
 	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_1_smt: pcfg-pull-none-drv-level-1-smt {
+		bias-disable;
+		drive-strength = <1>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_2_smt: pcfg-pull-none-drv-level-2-smt {
+		bias-disable;
+		drive-strength = <2>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_3_smt: pcfg-pull-none-drv-level-3-smt {
+		bias-disable;
+		drive-strength = <3>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_4_smt: pcfg-pull-none-drv-level-4-smt {
+		bias-disable;
+		drive-strength = <4>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_5_smt: pcfg-pull-none-drv-level-5-smt {
+		bias-disable;
+		drive-strength = <5>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
 	pcfg_output_high: pcfg-output-high {
 		output-high;
 	};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index a251c4343548..fc105d420db4 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -61,14 +61,14 @@
 			&i2s_port4
 			&spdif_port0
 			&comp_spdif_port0>;
-		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
+		hp-det-gpios = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
 	};
 
 	spdif-out {
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			spdif_tx: endpoint {
 				remote-endpoint = <&spdif_hiecout1>;
 			};
@@ -79,7 +79,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			comp_spdif_tx: endpoint {
 				remote-endpoint = <&comp_spdif_hiecout1>;
 			};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
index fba454adae7d..10efa747ed8b 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
@@ -74,7 +74,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			spdif_tx: endpoint {
 				remote-endpoint = <&spdif_hiecout1>;
 			};
@@ -85,7 +85,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			comp_spdif_tx: endpoint {
 				remote-endpoint = <&comp_spdif_hiecout1>;
 			};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 79f6db2455c1..3c4dcfb82ddf 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -61,14 +61,14 @@
 			&i2s_port4
 			&spdif_port0
 			&comp_spdif_port0>;
-		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
+		hp-det-gpios = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
 	};
 
 	spdif-out {
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			spdif_tx: endpoint {
 				remote-endpoint = <&spdif_hiecout1>;
 			};
@@ -79,7 +79,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			comp_spdif_tx: endpoint {
 				remote-endpoint = <&comp_spdif_hiecout1>;
 			};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 335093da6573..875b93856a64 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -947,6 +947,7 @@
 
 			pcie_intc: legacy-interrupt-controller {
 				interrupt-controller;
+				#address-cells = <0>;
 				#interrupt-cells = <1>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index d6e3cc6fdb25..4d6c3c2dbea6 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -921,6 +921,7 @@
 
 			pcie_intc: legacy-interrupt-controller {
 				interrupt-controller;
+				#address-cells = <0>;
 				#interrupt-cells = <1>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/sophgo/Makefile b/arch/arm64/boot/dts/sophgo/Makefile
new file mode 100644
index 000000000000..94f52cd7d994
--- /dev/null
+++ b/arch/arm64/boot/dts/sophgo/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SOPHGO) += sg2000-milkv-duo-module-01-evb.dtb
diff --git a/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts b/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts
new file mode 100644
index 000000000000..a281fee0d76e
--- /dev/null
+++ b/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "sg2000-milkv-duo-module-01.dtsi"
+
+/ {
+	model = "Milk-V Duo Module 01 Evaluation Board";
+	compatible = "milkv,duo-module-01-evb", "milkv,duo-module-01", "sophgo,sg2000";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pinctrl {
+	sdhci0_cfg: sdhci0-cfg {
+		sdhci0-cd-pins {
+			pinmux = <PINMUX(PIN_SD0_CD, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <10800>;
+			power-source = <3300>;
+		};
+
+		sdhci0-clk-pins {
+			pinmux = <PINMUX(PIN_SD0_CLK, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <16100>;
+			power-source = <3300>;
+		};
+
+		sdhci0-cmd-pins {
+			pinmux = <PINMUX(PIN_SD0_CMD, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <10800>;
+			power-source = <3300>;
+		};
+
+		sdhci0-data-pins {
+			pinmux = <PINMUX(PIN_SD0_D0, 0)>,
+				 <PINMUX(PIN_SD0_D1, 0)>,
+				 <PINMUX(PIN_SD0_D2, 0)>,
+				 <PINMUX(PIN_SD0_D3, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <10800>;
+			power-source = <3300>;
+		};
+	};
+
+	uart0_cfg: uart0-cfg {
+		uart0-pins {
+			pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+				 <PINMUX(PIN_UART0_RX, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <10800>;
+			power-source = <3300>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_cfg>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	pinctrl-0 = <&sdhci0_cfg>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01.dtsi b/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01.dtsi
new file mode 100644
index 000000000000..32c988f3c58f
--- /dev/null
+++ b/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include <dt-bindings/pinctrl/pinctrl-sg2000.h>
+#include "sg2000.dtsi"
+
+/ {
+	model = "Milk-V Duo Module 01";
+	compatible = "milkv,duo-module-01", "sophgo,sg2000";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+};
+
+&osc {
+	clock-frequency = <25000000>;
+};
+
+&emmc {
+	bus-width = <4>;
+	no-1-8-v;
+	cap-mmc-hw-reset;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+/* Wi-Fi */
+&sdhci1 {
+	bus-width = <4>;
+	cap-sdio-irq;
+	no-mmc;
+	no-sd;
+	non-removable;
+};
diff --git a/arch/arm64/boot/dts/sophgo/sg2000.dtsi b/arch/arm64/boot/dts/sophgo/sg2000.dtsi
new file mode 100644
index 000000000000..51177dfe9ed2
--- /dev/null
+++ b/arch/arm64/boot/dts/sophgo/sg2000.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#define SOC_PERIPHERAL_IRQ(nr)		GIC_SPI (nr)
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/sophgo/cv180x.dtsi>
+#include <riscv/sophgo/cv181x.dtsi>
+
+/ {
+	compatible = "sophgo,sg2000";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x20000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512MiB */
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+		cpu_on = <0xc4000003>;
+		cpu_off = <0x84000002>;
+	};
+
+	soc {
+		gic: interrupt-controller@1f01000 {
+			compatible = "arm,cortex-a15-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f01000 0x1000>,
+			      <0x01f02000 0x2000>;
+		};
+
+		pinctrl: pinctrl@3001000 {
+			compatible = "sophgo,sg2000-pinctrl";
+			reg = <0x03001000 0x1000>,
+			      <0x05027000 0x1000>;
+			reg-names = "sys", "rtc";
+		};
+
+		clk: clock-controller@3002000 {
+			compatible = "sophgo,sg2000-clk";
+			reg = <0x03002000 0x1000>;
+			clocks = <&osc>;
+			#clock-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		always-on;
+		clock-frequency = <25000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index 12136e68dada..458685b82462 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -94,17 +94,17 @@
 			nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
 		};
 
-		fuel-gauge@a00 {
+		pmic_fgu: fuel-gauge@a00 {
 			compatible = "sprd,sc2731-fgu";
 			reg = <0xa00>;
-			bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+			battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
 			io-channels = <&pmic_adc 3>, <&pmic_adc 6>;
 			io-channel-names = "bat-temp", "charge-vol";
-			monitored-battery = <&bat>;
 			nvmem-cell-names = "fgu_calib";
 			nvmem-cells = <&fgu_calib>;
 			interrupt-parent = <&sc2731_pmic>;
 			interrupts = <4>;
+			status = "disabled";
 		};
 
 		vibrator@ec8 {
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index d2456d633c39..864ef0a17425 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -184,20 +184,6 @@
 						| IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
-		pmu_gate: pmu-gate {
-			compatible = "sprd,sc9860-pmu-gate";
-			sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
-			clocks = <&ext_26m>;
-			#clock-cells = <1>;
-		};
-
-		pll: pll {
-			compatible = "sprd,sc9860-pll";
-			sprd,syscon = <&ana_regs>; /* 0x40400000 */
-			clocks = <&pmu_gate 0>;
-			#clock-cells = <1>;
-		};
-
 		ap_clk: clock-controller@20000000 {
 			compatible = "sprd,sc9860-ap-clk";
 			reg = <0 0x20000000 0 0x400>;
@@ -214,19 +200,6 @@
 			#clock-cells = <1>;
 		};
 
-		apahb_gate: apahb-gate {
-			compatible = "sprd,sc9860-apahb-gate";
-			sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */
-			clocks = <&aon_prediv 0>;
-			#clock-cells = <1>;
-		};
-
-		aon_gate: aon-gate {
-			compatible = "sprd,sc9860-aon-gate";
-			sprd,syscon = <&aon_regs>; /* 0x402e0000 */
-			clocks = <&aon_prediv 0>;
-			#clock-cells = <1>;
-		};
 
 		aonsecure_clk: clock-controller@40880000 {
 			compatible = "sprd,sc9860-aonsecure-clk";
@@ -235,13 +208,6 @@
 			#clock-cells = <1>;
 		};
 
-		agcp_gate: agcp-gate {
-			compatible = "sprd,sc9860-agcp-gate";
-			sprd,syscon = <&agcp_regs>; /* 0x415e0000 */
-			clocks = <&aon_prediv 0>;
-			#clock-cells = <1>;
-		};
-
 		gpu_clk: clock-controller@60200000 {
 			compatible = "sprd,sc9860-gpu-clk";
 			reg = <0 0x60200000 0 0x400>;
@@ -256,13 +222,6 @@
 			#clock-cells = <1>;
 		};
 
-		vsp_gate: vsp-gate {
-			compatible = "sprd,sc9860-vsp-gate";
-			sprd,syscon = <&vsp_regs>; /* 0x61100000 */
-			clocks = <&vsp_clk 0>;
-			#clock-cells = <1>;
-		};
-
 		cam_clk: clock-controller@62000000 {
 			compatible = "sprd,sc9860-cam-clk";
 			reg = <0 0x62000000 0 0x4000>;
@@ -270,13 +229,6 @@
 			#clock-cells = <1>;
 		};
 
-		cam_gate: cam-gate {
-			compatible = "sprd,sc9860-cam-gate";
-			sprd,syscon = <&cam_regs>; /* 0x62100000 */
-			clocks = <&cam_clk 0>;
-			#clock-cells = <1>;
-		};
-
 		disp_clk: clock-controller@63000000 {
 			compatible = "sprd,sc9860-disp-clk";
 			reg = <0 0x63000000 0 0x400>;
@@ -284,20 +236,6 @@
 			#clock-cells = <1>;
 		};
 
-		disp_gate: disp-gate {
-			compatible = "sprd,sc9860-disp-gate";
-			sprd,syscon = <&disp_regs>; /* 0x63100000 */
-			clocks = <&disp_clk 0>;
-			#clock-cells = <1>;
-		};
-
-		apapb_gate: apapb-gate {
-			compatible = "sprd,sc9860-apapb-gate";
-			sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */
-			clocks = <&ap_clk 0>;
-			#clock-cells = <1>;
-		};
-
 		funnel@10001000 { /* SoC Funnel */
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0 0x10001000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
index e5a2857721e2..e97000e560e7 100644
--- a/arch/arm64/boot/dts/sprd/sc9863a.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
@@ -163,18 +163,18 @@
 		ap_clk: clock-controller@21500000 {
 			compatible = "sprd,sc9863a-ap-clk";
 			reg = <0 0x21500000 0 0x1000>;
-			clocks = <&ext_32k>, <&ext_26m>;
-			clock-names = "ext-32k", "ext-26m";
+			clocks = <&ext_26m>, <&ext_32k>;
+			clock-names = "ext-26m", "ext-32k";
 			#clock-cells = <1>;
 		};
 
 		aon_clk: clock-controller@402d0000 {
 			compatible = "sprd,sc9863a-aon-clk";
 			reg = <0 0x402d0000 0 0x1000>;
-			clocks = <&ext_26m>, <&rco_100m>,
-				 <&ext_32k>, <&ext_4m>;
-			clock-names = "ext-26m", "rco-100m",
-				      "ext-32k", "ext-4m";
+			clocks = <&ext_26m>, <&ext_32k>,
+				 <&ext_4m>, <&rco_100m>;
+			clock-names = "ext-26m", "ext-32k",
+				      "ext-4m", "rco-100m";
 			#clock-cells = <1>;
 		};
 
@@ -288,7 +288,7 @@
 				};
 			};
 
-			in-port {
+			in-ports {
 				port {
 					etf_little_in: endpoint {
 						remote-endpoint =
diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
index 095b24a31313..b1fa817ece1e 100644
--- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -71,8 +71,8 @@
 		compatible = "simple-battery";
 		charge-full-design-microamp-hours = <1900000>;
 		charge-term-current-microamp = <120000>;
-		constant_charge_voltage_max_microvolt = <4350000>;
-		internal-resistance-micro-ohms = <250000>;
+		constant-charge-voltage-max-microvolt = <4350000>;
+		factory-internal-resistance-micro-ohms = <250000>;
 		ocv-capacity-celsius = <20>;
 		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
 			<4022000 85>, <3983000 80>, <3949000 75>,
@@ -84,6 +84,11 @@
 	};
 };
 
+&pmic_fgu {
+	monitored-battery = <&bat>;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index a551e14ce826..2ecaa56001b8 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -18,49 +18,67 @@
 		#size-cells = <2>;
 		ranges;
 
-		ap_ahb_regs: syscon@20210000 {
-			compatible = "syscon";
+		apahb_gate: clock-controller@20210000 {
 			reg = <0 0x20210000 0 0x10000>;
+			compatible = "sprd,sc9860-apahb-gate";
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
 		};
 
-		pmu_regs: syscon@402b0000 {
-			compatible = "syscon";
+		pmu_gate: clock-controller@402b0000 {
 			reg = <0 0x402b0000 0 0x10000>;
+			compatible = "sprd,sc9860-pmu-gate";
+			clocks = <&ext_26m>;
+			#clock-cells = <1>;
 		};
 
-		aon_regs: syscon@402e0000 {
-			compatible = "syscon";
+		aon_gate: clock-controller@402e0000 {
 			reg = <0 0x402e0000 0 0x10000>;
+			compatible = "sprd,sc9860-aon-gate";
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
 		};
 
-		ana_regs: syscon@40400000 {
-			compatible = "syscon";
+		pll: clock-controller@40400000 {
 			reg = <0 0x40400000 0 0x10000>;
+			compatible = "sprd,sc9860-pll";
+			clocks = <&pmu_gate 0>;
+			#clock-cells = <1>;
 		};
 
-		agcp_regs: syscon@415e0000 {
-			compatible = "syscon";
+		agcp_gate: clock-controller@415e0000 {
 			reg = <0 0x415e0000 0 0x1000000>;
+			compatible = "sprd,sc9860-agcp-gate";
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
 		};
 
-		vsp_regs: syscon@61100000 {
-			compatible = "syscon";
+		vsp_gate: clock-controller@61100000 {
 			reg = <0 0x61100000 0 0x10000>;
+			compatible = "sprd,sc9860-vsp-gate";
+			clocks = <&vsp_clk 0>;
+			#clock-cells = <1>;
 		};
 
-		cam_regs: syscon@62100000 {
-			compatible = "syscon";
+		cam_gate: clock-controller@62100000 {
 			reg = <0 0x62100000 0 0x10000>;
+			compatible = "sprd,sc9860-cam-gate";
+			clocks = <&cam_clk 0>;
+			#clock-cells = <1>;
 		};
 
-		disp_regs: syscon@63100000 {
-			compatible = "syscon";
+		disp_gate: clock-controller@63100000 {
 			reg = <0 0x63100000 0 0x10000>;
+			compatible = "sprd,sc9860-disp-gate";
+			clocks = <&disp_clk 0>;
+			#clock-cells = <1>;
 		};
 
-		ap_apb_regs: syscon@70b00000 {
-			compatible = "syscon";
+		apapb_gate: clock-controller@70b00000 {
 			reg = <0 0x70b00000 0 0x40000>;
+			compatible = "sprd,sc9860-apapb-gate";
+			clocks = <&ap_clk 0>;
+			#clock-cells = <1>;
 		};
 
 		ap-apb@70000000 {
diff --git a/arch/arm64/boot/dts/st/Makefile b/arch/arm64/boot/dts/st/Makefile
index 881fe1296c58..63908113ae36 100644
--- a/arch/arm64/boot/dts/st/Makefile
+++ b/arch/arm64/boot/dts/st/Makefile
@@ -1,2 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_STM32) += stm32mp257f-ev1.dtb
+dtb-$(CONFIG_ARCH_STM32) += \
+	stm32mp215f-dk.dtb \
+	stm32mp235f-dk.dtb \
+	stm32mp257f-dk.dtb \
+	stm32mp257f-ev1.dtb
diff --git a/arch/arm64/boot/dts/st/stm32mp211.dtsi b/arch/arm64/boot/dts/st/stm32mp211.dtsi
new file mode 100644
index 000000000000..cd078a16065e
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp211.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a35";
+			reg = <0>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	arm_wdt: watchdog {
+		compatible = "arm,smc-wdt";
+		arm,smc-id = <0xbc000000>;
+		status = "disabled";
+	};
+
+	ck_flexgen_08: clock-64000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <64000000>;
+	};
+
+	ck_flexgen_51: clock-200000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x0 0x80000000>;
+		dma-ranges = <0x0 0x0 0x80000000 0x1 0x0>;
+		interrupt-parent = <&intc>;
+		#address-cells = <1>;
+		#size-cells = <2>;
+
+		rifsc: bus@42080000 {
+			compatible = "st,stm32mp21-rifsc", "simple-bus";
+			reg = <0x42080000 0x0 0x1000>;
+			ranges;
+			dma-ranges;
+			#address-cells = <1>;
+			#size-cells = <2>;
+			#access-controller-cells = <1>;
+
+			usart2: serial@400e0000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x400e0000 0x0 0x400>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ck_flexgen_08>;
+				access-controllers = <&rifsc 32>;
+				status = "disabled";
+			};
+		};
+
+		syscfg: syscon@44230000 {
+			compatible = "st,stm32mp21-syscfg", "syscon";
+			reg = <0x44230000 0x0 0x10000>;
+		};
+
+		intc: interrupt-controller@4ac10000 {
+			compatible = "arm,gic-400";
+			reg = <0x4ac10000 0x0 0x1000>,
+			      <0x4ac20000 0x0 0x20000>,
+			      <0x4ac40000 0x0 0x20000>,
+			      <0x4ac60000 0x0 0x20000>;
+			      #interrupt-cells = <3>;
+			      interrupt-controller;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp213.dtsi b/arch/arm64/boot/dts/st/stm32mp213.dtsi
new file mode 100644
index 000000000000..fdd2dc432edd
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp213.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp211.dtsi"
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp215.dtsi b/arch/arm64/boot/dts/st/stm32mp215.dtsi
new file mode 100644
index 000000000000..a7df77f928c5
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp215.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp213.dtsi"
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp215f-dk.dts b/arch/arm64/boot/dts/st/stm32mp215f-dk.dts
new file mode 100644
index 000000000000..7bdaeaa5ab0f
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp215f-dk.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp215.dtsi"
+#include "stm32mp21xf.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP215F-DK Discovery Board";
+	compatible = "st,stm32mp215f-dk", "st,stm32mp215";
+
+	aliases {
+		serial0 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		fw@80000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x4000000>;
+			no-map;
+		};
+	};
+};
+
+&arm_wdt {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp21xc.dtsi b/arch/arm64/boot/dts/st/stm32mp21xc.dtsi
new file mode 100644
index 000000000000..e33b00b424e1
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp21xc.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp21xf.dtsi b/arch/arm64/boot/dts/st/stm32mp21xf.dtsi
new file mode 100644
index 000000000000..e33b00b424e1
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp21xf.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp231.dtsi b/arch/arm64/boot/dts/st/stm32mp231.dtsi
new file mode 100644
index 000000000000..88e214d395ab
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp231.dtsi
@@ -0,0 +1,1191 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/clock/st,stm32mp25-rcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/regulator/st,stm32mp25-regulator.h>
+#include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a35";
+			reg = <0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			power-domains = <&cpu0_pd>;
+			power-domain-names = "psci";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	arm_wdt: watchdog {
+		compatible = "arm,smc-wdt";
+		arm,smc-id = <0xb200005a>;
+		status = "disabled";
+	};
+
+	clk_dsi_txbyte: clock-0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	clk_rcbsec: clk-64000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <64000000>;
+	};
+
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+
+			scmi_voltd: protocol@17 {
+				reg = <0x17>;
+
+				scmi_regu: regulators {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					scmi_vddio1: regulator@0 {
+						reg = <VOLTD_SCMI_VDDIO1>;
+						regulator-name = "vddio1";
+					};
+					scmi_vddio2: regulator@1 {
+						reg = <VOLTD_SCMI_VDDIO2>;
+						regulator-name = "vddio2";
+					};
+					scmi_vddio3: regulator@2 {
+						reg = <VOLTD_SCMI_VDDIO3>;
+						regulator-name = "vddio3";
+					};
+					scmi_vddio4: regulator@3 {
+						reg = <VOLTD_SCMI_VDDIO4>;
+						regulator-name = "vddio4";
+					};
+					scmi_vdd33ucpd: regulator@5 {
+						reg = <VOLTD_SCMI_UCPD>;
+						regulator-name = "vdd33ucpd";
+					};
+					scmi_vdda18adc: regulator@7 {
+						reg = <VOLTD_SCMI_ADC>;
+						regulator-name = "vdda18adc";
+					};
+				};
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cpu0_pd: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+		};
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			power-domains = <&ret_pd>;
+		};
+
+		ret_pd: power-domain-retention {
+			#power-domain-cells = <0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		always-on;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x80000000>;
+		interrupt-parent = <&intc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		hpdma: dma-controller@40400000 {
+			compatible = "st,stm32mp25-dma3";
+			reg = <0x40400000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk CK_SCMI_HPDMA1>;
+			#dma-cells = <3>;
+		};
+
+		hpdma2: dma-controller@40410000 {
+			compatible = "st,stm32mp25-dma3";
+			reg = <0x40410000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk CK_SCMI_HPDMA2>;
+			#dma-cells = <3>;
+		};
+
+		hpdma3: dma-controller@40420000 {
+			compatible = "st,stm32mp25-dma3";
+			reg = <0x40420000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk CK_SCMI_HPDMA3>;
+			#dma-cells = <3>;
+		};
+
+		rifsc: bus@42080000 {
+			compatible = "st,stm32mp25-rifsc", "simple-bus";
+			reg = <0x42080000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#access-controller-cells = <1>;
+
+			i2s2: audio-controller@400b0000 {
+				compatible = "st,stm32mp25-i2s";
+				reg = <0x400b0000 0x400>;
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_BUS_SPI2>, <&rcc CK_KER_SPI2>;
+				clock-names = "pclk", "i2sclk";
+				resets = <&rcc SPI2_R>;
+				dmas = <&hpdma 51 0x43 0x12>,
+				       <&hpdma 52 0x43 0x21>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 23>;
+				status = "disabled";
+			};
+
+			spi2: spi@400b0000 {
+				compatible = "st,stm32mp25-spi";
+				reg = <0x400b0000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI2>;
+				resets = <&rcc SPI2_R>;
+				dmas = <&hpdma 51 0x20 0x3012>,
+				       <&hpdma 52 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 23>;
+				status = "disabled";
+			};
+
+			i2s3: audio-controller@400c0000 {
+				compatible = "st,stm32mp25-i2s";
+				reg = <0x400c0000 0x400>;
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_BUS_SPI3>, <&rcc CK_KER_SPI3>;
+				clock-names = "pclk", "i2sclk";
+				resets = <&rcc SPI3_R>;
+				dmas = <&hpdma 53 0x43 0x12>,
+				       <&hpdma 54 0x43 0x21>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 24>;
+				status = "disabled";
+			};
+
+			spi3: spi@400c0000 {
+				compatible = "st,stm32mp25-spi";
+				reg = <0x400c0000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI3>;
+				resets = <&rcc SPI3_R>;
+				dmas = <&hpdma 53 0x20 0x3012>,
+				       <&hpdma 54 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 24>;
+				status = "disabled";
+			};
+
+			spdifrx: audio-controller@400d0000 {
+				compatible = "st,stm32h7-spdifrx";
+				reg = <0x400d0000 0x400>;
+				#sound-dai-cells = <0>;
+				clocks = <&rcc CK_KER_SPDIFRX>;
+				clock-names = "kclk";
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&hpdma 71 0x43 0x212>,
+				       <&hpdma 72 0x43 0x212>;
+				dma-names = "rx", "rx-ctrl";
+				access-controllers = <&rifsc 30>;
+				status = "disabled";
+			};
+
+			usart2: serial@400e0000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x400e0000 0x400>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_USART2>;
+				dmas = <&hpdma 11 0x20 0x10012>,
+				       <&hpdma 12 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 32>;
+				status = "disabled";
+			};
+
+			usart3: serial@400f0000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x400f0000 0x400>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_USART3>;
+				dmas = <&hpdma 13 0x20 0x10012>,
+				       <&hpdma 14 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 33>;
+				status = "disabled";
+			};
+
+			uart4: serial@40100000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40100000 0x400>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_UART4>;
+				dmas = <&hpdma 15 0x20 0x10012>,
+				       <&hpdma 16 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 34>;
+				status = "disabled";
+			};
+
+			uart5: serial@40110000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40110000 0x400>;
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_UART5>;
+				dmas = <&hpdma 17 0x20 0x10012>,
+				       <&hpdma 18 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 35>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@40120000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x40120000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C1>;
+				resets = <&rcc I2C1_R>;
+				dmas = <&hpdma 27 0x20 0x3012>,
+				       <&hpdma 28 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 41>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@40130000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x40130000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C2>;
+				resets = <&rcc I2C2_R>;
+				dmas = <&hpdma 30 0x20 0x3012>,
+				       <&hpdma 31 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 42>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@40180000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x40180000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C7>;
+				resets = <&rcc I2C7_R>;
+				dmas = <&hpdma 45 0x20 0x3012>,
+				       <&hpdma 46 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 47>;
+				status = "disabled";
+			};
+
+			usart6: serial@40220000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40220000 0x400>;
+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_USART6>;
+				dmas = <&hpdma 19 0x20 0x10012>,
+				       <&hpdma 20 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 36>;
+				status = "disabled";
+			};
+
+			i2s1: audio-controller@40230000 {
+				compatible = "st,stm32mp25-i2s";
+				reg = <0x40230000 0x400>;
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_BUS_SPI1>, <&rcc CK_KER_SPI1>;
+				clock-names = "pclk", "i2sclk";
+				resets = <&rcc SPI1_R>;
+				dmas = <&hpdma 49 0x43 0x12>,
+				       <&hpdma 50 0x43 0x21>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 22>;
+				status = "disabled";
+			};
+
+			spi1: spi@40230000 {
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40230000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI1>;
+				resets = <&rcc SPI1_R>;
+				dmas = <&hpdma 49 0x20 0x3012>,
+				       <&hpdma 50 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 22>;
+				status = "disabled";
+			};
+
+			spi4: spi@40240000 {
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40240000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI4>;
+				resets = <&rcc SPI4_R>;
+				dmas = <&hpdma 55 0x20 0x3012>,
+				       <&hpdma 56 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 25>;
+				status = "disabled";
+			};
+
+			spi5: spi@40280000 {
+				compatible = "st,stm32mp25-spi";
+				reg = <0x40280000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI5>;
+				resets = <&rcc SPI5_R>;
+				dmas = <&hpdma 57 0x20 0x3012>,
+				       <&hpdma 58 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 26>;
+				status = "disabled";
+			};
+
+			sai1: sai@40290000 {
+				compatible = "st,stm32mp25-sai";
+				reg = <0x40290000 0x4>, <0x4029a3f0 0x10>;
+				ranges = <0 0x40290000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&rcc CK_BUS_SAI1>;
+				clock-names = "pclk";
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI1_R>;
+				access-controllers = <&rifsc 49>;
+				status = "disabled";
+
+				sai1a: audio-controller@40290004 {
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI1>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 73 0x43 0x21>;
+					status = "disabled";
+				};
+
+				sai1b: audio-controller@40290024 {
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI1>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 74 0x43 0x12>;
+					status = "disabled";
+				};
+			};
+
+			sai2: sai@402a0000 {
+				compatible = "st,stm32mp25-sai";
+				reg = <0x402a0000 0x4>, <0x402aa3f0 0x10>;
+				ranges = <0 0x402a0000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&rcc CK_BUS_SAI2>;
+				clock-names = "pclk";
+				interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI2_R>;
+				access-controllers = <&rifsc 50>;
+				status = "disabled";
+
+				sai2a: audio-controller@402a0004 {
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI2>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 75 0x43 0x21>;
+					status = "disabled";
+				};
+
+				sai2b: audio-controller@402a0024 {
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI2>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 76 0x43 0x12>;
+					status = "disabled";
+				};
+			};
+
+			sai3: sai@402b0000 {
+				compatible = "st,stm32mp25-sai";
+				reg = <0x402b0000 0x4>, <0x402ba3f0 0x10>;
+				ranges = <0 0x402b0000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&rcc CK_BUS_SAI3>;
+				clock-names = "pclk";
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI3_R>;
+				access-controllers = <&rifsc 51>;
+				status = "disabled";
+
+				sai3a: audio-controller@402b0004 {
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI3>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 77 0x43 0x21>;
+					status = "disabled";
+				};
+
+				sai3b: audio-controller@502b0024 {
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI3>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 78 0x43 0x12>;
+					status = "disabled";
+				};
+			};
+
+			usart1: serial@40330000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40330000 0x400>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_USART1>;
+				dmas = <&hpdma 9 0x20 0x10012>,
+				       <&hpdma 10 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 31>;
+				status = "disabled";
+			};
+
+			sai4: sai@40340000 {
+				compatible = "st,stm32mp25-sai";
+				reg = <0x40340000 0x4>, <0x4034a3f0 0x10>;
+				ranges = <0 0x40340000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&rcc CK_BUS_SAI4>;
+				clock-names = "pclk";
+				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI4_R>;
+				access-controllers = <&rifsc 52>;
+				status = "disabled";
+
+				sai4a: audio-controller@40340004 {
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI4>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 79 0x63 0x21>;
+					status = "disabled";
+				};
+
+				sai4b: audio-controller@40340024 {
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI4>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 80 0x43 0x12>;
+					status = "disabled";
+				};
+			};
+
+			uart7: serial@40370000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40370000 0x400>;
+				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_UART7>;
+				dmas = <&hpdma 21 0x20 0x10012>,
+				       <&hpdma 22 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 37>;
+				status = "disabled";
+			};
+
+			rng: rng@42020000 {
+				compatible = "st,stm32mp25-rng";
+				reg = <0x42020000 0x400>;
+				clocks = <&clk_rcbsec>, <&rcc CK_BUS_RNG>;
+				clock-names = "core", "bus";
+				resets = <&rcc RNG_R>;
+				access-controllers = <&rifsc 92>;
+				status = "disabled";
+			};
+
+			spi8: spi@46020000 {
+				compatible = "st,stm32mp25-spi";
+				reg = <0x46020000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SPI8>;
+				resets = <&rcc SPI8_R>;
+				dmas = <&hpdma 171 0x20 0x3012>,
+				       <&hpdma 172 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 29>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@46040000 {
+				compatible = "st,stm32mp25-i2c";
+				reg = <0x46040000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-names = "event";
+				interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_I2C8>;
+				resets = <&rcc I2C8_R>;
+				dmas = <&hpdma 168 0x20 0x3012>,
+				       <&hpdma 169 0x20 0x3021>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 48>;
+				status = "disabled";
+			};
+
+			csi: csi@48020000 {
+				compatible = "st,stm32mp25-csi";
+				reg = <0x48020000 0x2000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc CSI_R>;
+				clocks = <&rcc CK_KER_CSI>, <&rcc CK_KER_CSITXESC>,
+					 <&rcc CK_KER_CSIPHY>;
+				clock-names = "pclk", "txesc", "csi2phy";
+				access-controllers = <&rifsc 86>;
+				status = "disabled";
+			};
+
+			dcmipp: dcmipp@48030000 {
+				compatible = "st,stm32mp25-dcmipp";
+				reg = <0x48030000 0x1000>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc DCMIPP_R>;
+				clocks = <&rcc CK_BUS_DCMIPP>, <&rcc CK_KER_CSI>;
+				clock-names = "kclk", "mclk";
+				access-controllers = <&rifsc 87>;
+				status = "disabled";
+			};
+
+			sdmmc1: mmc@48220000 {
+				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
+				reg = <0x48220000 0x400>, <0x44230400 0x8>;
+				arm,primecell-periphid = <0x00353180>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_SDMMC1 >;
+				clock-names = "apb_pclk";
+				resets = <&rcc SDMMC1_R>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <120000000>;
+				access-controllers = <&rifsc 76>;
+				status = "disabled";
+			};
+
+			ethernet1: ethernet@482c0000 {
+				compatible = "st,stm32mp25-dwmac", "snps,dwmac-5.20";
+				reg = <0x482c0000 0x4000>;
+				reg-names = "stmmaceth";
+				interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq";
+				clock-names = "stmmaceth",
+					      "mac-clk-tx",
+					      "mac-clk-rx",
+					      "ptp_ref",
+					      "ethstp",
+					      "eth-ck";
+				clocks = <&rcc CK_ETH1_MAC>,
+					 <&rcc CK_ETH1_TX>,
+					 <&rcc CK_ETH1_RX>,
+					 <&rcc CK_KER_ETH1PTP>,
+					 <&rcc CK_ETH1_STP>,
+					 <&rcc CK_KER_ETH1>;
+				snps,axi-config = <&stmmac_axi_config_1>;
+				snps,mixed-burst;
+				snps,mtl-rx-config = <&mtl_rx_setup_1>;
+				snps,mtl-tx-config = <&mtl_tx_setup_1>;
+				snps,pbl = <2>;
+				snps,tso;
+				st,syscon = <&syscfg 0x3000>;
+				access-controllers = <&rifsc 60>;
+				status = "disabled";
+
+				mtl_rx_setup_1: rx-queues-config {
+					snps,rx-queues-to-use = <2>;
+					queue0 {};
+					queue1 {};
+				};
+
+				mtl_tx_setup_1: tx-queues-config {
+					snps,tx-queues-to-use = <4>;
+					queue0 {};
+					queue1 {};
+					queue2 {};
+					queue3 {};
+				};
+
+				stmmac_axi_config_1: stmmac-axi-config {
+					snps,blen = <0 0 0 0 16 8 4>;
+					snps,rd_osr_lmt = <0x7>;
+					snps,wr_osr_lmt = <0x7>;
+				};
+			};
+		};
+
+		bsec: efuse@44000000 {
+			compatible = "st,stm32mp25-bsec";
+			reg = <0x44000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			part_number_otp@24 {
+				reg = <0x24 0x4>;
+			};
+
+			package_otp@1e8 {
+				reg = <0x1e8 0x1>;
+				bits = <0 3>;
+			};
+		};
+
+		rcc: clock-controller@44200000 {
+			compatible = "st,stm32mp25-rcc";
+			reg = <0x44200000 0x10000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&scmi_clk CK_SCMI_HSE>,
+				<&scmi_clk CK_SCMI_HSI>,
+				<&scmi_clk CK_SCMI_MSI>,
+				<&scmi_clk CK_SCMI_LSE>,
+				<&scmi_clk CK_SCMI_LSI>,
+				<&scmi_clk CK_SCMI_HSE_DIV2>,
+				<&scmi_clk CK_SCMI_ICN_HS_MCU>,
+				<&scmi_clk CK_SCMI_ICN_LS_MCU>,
+				<&scmi_clk CK_SCMI_ICN_SDMMC>,
+				<&scmi_clk CK_SCMI_ICN_DDR>,
+				<&scmi_clk CK_SCMI_ICN_DISPLAY>,
+				<&scmi_clk CK_SCMI_ICN_HSL>,
+				<&scmi_clk CK_SCMI_ICN_NIC>,
+				<&scmi_clk CK_SCMI_ICN_VID>,
+				<&scmi_clk CK_SCMI_FLEXGEN_07>,
+				<&scmi_clk CK_SCMI_FLEXGEN_08>,
+				<&scmi_clk CK_SCMI_FLEXGEN_09>,
+				<&scmi_clk CK_SCMI_FLEXGEN_10>,
+				<&scmi_clk CK_SCMI_FLEXGEN_11>,
+				<&scmi_clk CK_SCMI_FLEXGEN_12>,
+				<&scmi_clk CK_SCMI_FLEXGEN_13>,
+				<&scmi_clk CK_SCMI_FLEXGEN_14>,
+				<&scmi_clk CK_SCMI_FLEXGEN_15>,
+				<&scmi_clk CK_SCMI_FLEXGEN_16>,
+				<&scmi_clk CK_SCMI_FLEXGEN_17>,
+				<&scmi_clk CK_SCMI_FLEXGEN_18>,
+				<&scmi_clk CK_SCMI_FLEXGEN_19>,
+				<&scmi_clk CK_SCMI_FLEXGEN_20>,
+				<&scmi_clk CK_SCMI_FLEXGEN_21>,
+				<&scmi_clk CK_SCMI_FLEXGEN_22>,
+				<&scmi_clk CK_SCMI_FLEXGEN_23>,
+				<&scmi_clk CK_SCMI_FLEXGEN_24>,
+				<&scmi_clk CK_SCMI_FLEXGEN_25>,
+				<&scmi_clk CK_SCMI_FLEXGEN_26>,
+				<&scmi_clk CK_SCMI_FLEXGEN_27>,
+				<&scmi_clk CK_SCMI_FLEXGEN_28>,
+				<&scmi_clk CK_SCMI_FLEXGEN_29>,
+				<&scmi_clk CK_SCMI_FLEXGEN_30>,
+				<&scmi_clk CK_SCMI_FLEXGEN_31>,
+				<&scmi_clk CK_SCMI_FLEXGEN_32>,
+				<&scmi_clk CK_SCMI_FLEXGEN_33>,
+				<&scmi_clk CK_SCMI_FLEXGEN_34>,
+				<&scmi_clk CK_SCMI_FLEXGEN_35>,
+				<&scmi_clk CK_SCMI_FLEXGEN_36>,
+				<&scmi_clk CK_SCMI_FLEXGEN_37>,
+				<&scmi_clk CK_SCMI_FLEXGEN_38>,
+				<&scmi_clk CK_SCMI_FLEXGEN_39>,
+				<&scmi_clk CK_SCMI_FLEXGEN_40>,
+				<&scmi_clk CK_SCMI_FLEXGEN_41>,
+				<&scmi_clk CK_SCMI_FLEXGEN_42>,
+				<&scmi_clk CK_SCMI_FLEXGEN_43>,
+				<&scmi_clk CK_SCMI_FLEXGEN_44>,
+				<&scmi_clk CK_SCMI_FLEXGEN_45>,
+				<&scmi_clk CK_SCMI_FLEXGEN_46>,
+				<&scmi_clk CK_SCMI_FLEXGEN_47>,
+				<&scmi_clk CK_SCMI_FLEXGEN_48>,
+				<&scmi_clk CK_SCMI_FLEXGEN_49>,
+				<&scmi_clk CK_SCMI_FLEXGEN_50>,
+				<&scmi_clk CK_SCMI_FLEXGEN_51>,
+				<&scmi_clk CK_SCMI_FLEXGEN_52>,
+				<&scmi_clk CK_SCMI_FLEXGEN_53>,
+				<&scmi_clk CK_SCMI_FLEXGEN_54>,
+				<&scmi_clk CK_SCMI_FLEXGEN_55>,
+				<&scmi_clk CK_SCMI_FLEXGEN_56>,
+				<&scmi_clk CK_SCMI_FLEXGEN_57>,
+				<&scmi_clk CK_SCMI_FLEXGEN_58>,
+				<&scmi_clk CK_SCMI_FLEXGEN_59>,
+				<&scmi_clk CK_SCMI_FLEXGEN_60>,
+				<&scmi_clk CK_SCMI_FLEXGEN_61>,
+				<&scmi_clk CK_SCMI_FLEXGEN_62>,
+				<&scmi_clk CK_SCMI_FLEXGEN_63>,
+				<&scmi_clk CK_SCMI_ICN_APB1>,
+				<&scmi_clk CK_SCMI_ICN_APB2>,
+				<&scmi_clk CK_SCMI_ICN_APB3>,
+				<&scmi_clk CK_SCMI_ICN_APB4>,
+				<&scmi_clk CK_SCMI_ICN_APBDBG>,
+				<&scmi_clk CK_SCMI_TIMG1>,
+				<&scmi_clk CK_SCMI_TIMG2>,
+				<&scmi_clk CK_SCMI_PLL3>,
+				<&clk_dsi_txbyte>;
+				access-controllers = <&rifsc 156>;
+		};
+
+		exti1: interrupt-controller@44220000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			reg = <0x44220000 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts-extended =
+				<&intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_0 */
+				<&intc GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_10 */
+				<&intc GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 1   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,						/* EXTI_20 */
+				<&intc GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_30 */
+				<&intc GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_40 */
+				<&intc GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_50 */
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,						/* EXTI_60 */
+				<&intc GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 10  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_70 */
+				<0>,
+				<&intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,						/* EXTI_80 */
+				<0>,
+				<0>,
+				<&intc GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscfg: syscon@44230000 {
+			compatible = "st,stm32mp23-syscfg", "syscon";
+			reg = <0x44230000 0x10000>;
+		};
+
+		pinctrl: pinctrl@44240000 {
+			compatible = "st,stm32mp257-pinctrl";
+			ranges = <0 0x44240000 0xa0400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&exti1>;
+			st,syscfg = <&exti1 0x60 0xff>;
+			pins-are-numbered;
+
+			gpioa: gpio@44240000 {
+				reg = <0x0 0x400>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&scmi_clk CK_SCMI_GPIOA>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@44250000 {
+				reg = <0x10000 0x400>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&scmi_clk CK_SCMI_GPIOB>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@44260000 {
+				reg = <0x20000 0x400>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&scmi_clk CK_SCMI_GPIOC>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@44270000 {
+				reg = <0x30000 0x400>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&scmi_clk CK_SCMI_GPIOD>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@44280000 {
+				reg = <0x40000 0x400>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&scmi_clk CK_SCMI_GPIOE>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@44290000 {
+				reg = <0x50000 0x400>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&scmi_clk CK_SCMI_GPIOF>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@442a0000 {
+				reg = <0x60000 0x400>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&scmi_clk CK_SCMI_GPIOG>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@442b0000 {
+				reg = <0x70000 0x400>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&scmi_clk CK_SCMI_GPIOH>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@442c0000 {
+				reg = <0x80000 0x400>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&scmi_clk CK_SCMI_GPIOI>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+		};
+
+		rtc: rtc@46000000 {
+			compatible = "st,stm32mp25-rtc";
+			reg = <0x46000000 0x400>;
+			clocks = <&scmi_clk CK_SCMI_RTC>,
+				 <&scmi_clk CK_SCMI_RTCCK>;
+			clock-names = "pclk", "rtc_ck";
+			interrupts-extended = <&exti2 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pinctrl_z: pinctrl@46200000 {
+			compatible = "st,stm32mp257-z-pinctrl";
+			ranges = <0 0x46200000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&exti1>;
+			st,syscfg = <&exti1 0x60 0xff>;
+			pins-are-numbered;
+
+			gpioz: gpio@46200000 {
+				reg = <0 0x400>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+
+		};
+
+		exti2: interrupt-controller@46230000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			reg = <0x46230000 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts-extended =
+				<&intc GIC_SPI 17  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_0 */
+				<&intc GIC_SPI 18  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 19  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 20  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 21  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 22  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 23  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 24  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 25  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 26  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 27  IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_10 */
+				<&intc GIC_SPI 28  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 29  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 30  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 31  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 32  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 12  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 13  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_20 */
+				<&intc GIC_SPI 14  IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 15  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_30 */
+				<&intc GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_40 */
+				<0>,
+				<0>,
+				<&intc GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 11  IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 5   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 4   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 6   IRQ_TYPE_LEVEL_HIGH>,	/* EXTI_50 */
+				<&intc GIC_SPI 7   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 2   IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 3   IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,
+				<0>,						/* EXTI_60 */
+				<&intc GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<&intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				<0>,
+				<0>,
+				<&intc GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;	/* EXTI_70 */
+		};
+
+		intc: interrupt-controller@4ac10000 {
+			compatible = "arm,gic-400";
+			reg = <0x4ac10000 0x1000>,
+			      <0x4ac20000 0x20000>,
+			      <0x4ac40000 0x20000>,
+			      <0x4ac60000 0x20000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp233.dtsi b/arch/arm64/boot/dts/st/stm32mp233.dtsi
new file mode 100644
index 000000000000..78f4059fca5d
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp233.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp231.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a35";
+			reg = <1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			power-domains = <&cpu1_pd>;
+			power-domain-names = "psci";
+		};
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	psci {
+		cpu1_pd: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+		};
+	};
+
+	timer {
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&optee {
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
+&rifsc {
+	ethernet2: ethernet@482d0000 {
+		compatible = "st,stm32mp25-dwmac", "snps,dwmac-5.20";
+		reg = <0x482d0000 0x4000>;
+		reg-names = "stmmaceth";
+		interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clock-names = "stmmaceth",
+			      "mac-clk-tx",
+			      "mac-clk-rx",
+			      "ptp_ref",
+			      "ethstp",
+			      "eth-ck";
+		clocks = <&rcc CK_ETH2_MAC>,
+			 <&rcc CK_ETH2_TX>,
+			 <&rcc CK_ETH2_RX>,
+			 <&rcc CK_KER_ETH2PTP>,
+			 <&rcc CK_ETH2_STP>,
+			 <&rcc CK_KER_ETH2>;
+		snps,axi-config = <&stmmac_axi_config_2>;
+		snps,mixed-burst;
+		snps,mtl-rx-config = <&mtl_rx_setup_2>;
+		snps,mtl-tx-config = <&mtl_tx_setup_2>;
+		snps,pbl = <2>;
+		snps,tso;
+		st,syscon = <&syscfg 0x3400>;
+		access-controllers = <&rifsc 61>;
+		status = "disabled";
+
+		mtl_rx_setup_2: rx-queues-config {
+			snps,rx-queues-to-use = <2>;
+			queue0 {};
+			queue1 {};
+		};
+
+		mtl_tx_setup_2: tx-queues-config {
+			snps,tx-queues-to-use = <4>;
+			queue0 {};
+			queue1 {};
+			queue2 {};
+			queue3 {};
+		};
+
+		stmmac_axi_config_2: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,rd_osr_lmt = <0x7>;
+			snps,wr_osr_lmt = <0x7>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp235.dtsi b/arch/arm64/boot/dts/st/stm32mp235.dtsi
new file mode 100644
index 000000000000..2719c088dd59
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp235.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp233.dtsi"
+
+&rifsc {
+	vdec: vdec@480d0000 {
+		compatible = "st,stm32mp25-vdec";
+		reg = <0x480d0000 0x3c8>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CK_BUS_VDEC>;
+		access-controllers = <&rifsc 89>;
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp235f-dk.dts b/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
new file mode 100644
index 000000000000..c3e688068223
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "stm32mp235.dtsi"
+#include "stm32mp23xf.dtsi"
+#include "stm32mp25-pinctrl.dtsi"
+#include "stm32mp25xxak-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP235F-DK Discovery Board";
+	compatible = "st,stm32mp235f-dk", "st,stm32mp235";
+
+	aliases {
+		ethernet0 = &ethernet1;
+		serial0 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user-1 {
+			label = "User-1";
+			linux,code = <BTN_1>;
+			gpios = <&gpioc 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-user-2 {
+			label = "User-2";
+			linux,code = <BTN_2>;
+			gpios = <&gpioc 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpioh 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		fw@80000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x4000000>;
+			no-map;
+		};
+	};
+};
+
+&arm_wdt {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&ethernet1 {
+	pinctrl-0 = <&eth1_rgmii_pins_b>;
+	pinctrl-1 = <&eth1_rgmii_sleep_pins_b>;
+	pinctrl-names = "default", "sleep";
+	phy-handle = <&phy1_eth1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1_eth1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <1>;
+			reset-gpios =  <&gpioa 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+		};
+	};
+};
+
+&scmi_regu {
+	scmi_vddio1: regulator@0 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+	scmi_vdd_sdcard: regulator@23 {
+		reg = <VOLTD_SCMI_STPMIC2_LDO7>;
+		regulator-name = "vdd_sdcard";
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpiod 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&scmi_vdd_sdcard>;
+	vqmmc-supply = <&scmi_vddio1>;
+	status = "okay";
+};
+
+&usart2 {
+	pinctrl-names = "default", "idle", "sleep";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_idle_pins_a>;
+	pinctrl-2 = <&usart2_sleep_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp23xc.dtsi b/arch/arm64/boot/dts/st/stm32mp23xc.dtsi
new file mode 100644
index 000000000000..e33b00b424e1
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp23xc.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp23xf.dtsi b/arch/arm64/boot/dts/st/stm32mp23xf.dtsi
new file mode 100644
index 000000000000..e33b00b424e1
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp23xf.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index 8fdd5f020425..c34cd33cd855 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -6,6 +6,134 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	eth1_mdio_pins_a: eth1-mdio-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF10)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 2, AF10)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	eth1_mdio_sleep_pins_a: eth1-mdio-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('F', 2, ANALOG)>; /* ETH_MDIO */
+		};
+	};
+
+	eth1_rgmii_pins_a: eth1-rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 15, AF10)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('C', 1, AF10)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('H', 10, AF10)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('H', 11, AF10)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('A', 13, AF10)>; /* ETH_RGMII_TX_CTL */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+			st,io-sync = "data on both edges";
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('C', 0, AF12)>; /* ETH_RGMII_GTX_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('F', 1, AF10)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 2, AF10)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 12, AF10)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+			st,io-sync = "data on both edges";
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+			bias-disable;
+		};
+	};
+
+	eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('H', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('A', 13, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('H', 9, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('F', 1, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 11, ANALOG)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('A', 14, ANALOG)>; /* ETH_RGMII_RX_CLK */
+		};
+	};
+
+	eth1_rgmii_pins_b: eth1-rgmii-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 15, AF10)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('C', 1, AF10)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('H', 10, AF10)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('H', 11, AF10)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('A', 13, AF10)>; /* ETH_RGMII_TX_CTL */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('C', 0, AF12)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('A', 9, AF10)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 10, AF10)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('F', 1, AF10)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 2, AF10)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 12, AF10)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+			bias-disable;
+		};
+	};
+
+	eth1_rgmii_sleep_pins_b: eth1-rgmii-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('H', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('A', 13, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('H', 9, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 10, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('F', 1, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 11, ANALOG)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+		};
+	};
+
 	eth2_rgmii_pins_a: eth2-rgmii-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('C', 7, AF10)>, /* ETH_RGMII_TXD0 */
@@ -16,6 +144,7 @@
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <3>;
+			st,io-sync = "data on both edges";
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* ETH_RGMII_CLK125 */
@@ -38,6 +167,7 @@
 				 <STM32_PINMUX('C', 11, AF10)>, /* ETH_RGMII_RXD3 */
 				 <STM32_PINMUX('C', 3, AF10)>; /* ETH_RGMII_RX_CTL */
 			bias-disable;
+			st,io-sync = "data on both edges";
 		};
 		pins5 {
 			pinmux = <STM32_PINMUX('F', 6, AF10)>; /* ETH_RGMII_RX_CLK */
@@ -82,6 +212,124 @@
 		};
 	};
 
+	ospi_port1_clk_pins_a: ospi-port1-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, AF10)>; /* OSPI1_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	ospi_port1_clk_sleep_pins_a: ospi-port1-clk-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, ANALOG)>; /* OSPI1_CLK */
+		};
+	};
+
+	ospi_port1_cs0_pins_a: ospi-port1-cs0-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 3, AF10)>; /* OSPI_NCS0 */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	ospi_port1_cs0_sleep_pins_a: ospi-port1-cs0-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 3, ANALOG)>; /* OSPI_NCS0 */
+		};
+	};
+
+	ospi_port1_io03_pins_a: ospi-port1-io03-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, AF10)>, /* OSPI_IO0 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* OSPI_IO1 */
+				 <STM32_PINMUX('D', 6, AF10)>, /* OSPI_IO2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* OSPI_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	ospi_port1_io03_sleep_pins_a: ospi-port1-io03-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* OSPI_IO0 */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* OSPI_IO1 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* OSPI_IO2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>; /* OSPI_IO3 */
+		};
+	};
+
+	pcie_pins_a: pcie-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 0, AF4)>;
+			bias-disable;
+		};
+	};
+
+	pcie_init_pins_a: pcie-init-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 0, GPIO)>;
+			output-low;
+		};
+	};
+
+	pcie_sleep_pins_a: pcie-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 0, ANALOG)>;
+		};
+	};
+
+	pwm3_pins_a: pwm3-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 15, AF7)>; /* TIM3_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_a: pwm3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 15, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	pwm8_pins_a: pwm8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 5, AF8)>, /* TIM8_CH1 */
+				 <STM32_PINMUX('J', 4, AF8)>; /* TIM8_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm8_sleep_pins_a: pwm8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 5, ANALOG)>, /* TIM8_CH1 */
+				 <STM32_PINMUX('J', 4, ANALOG)>; /* TIM8_CH4 */
+		};
+	};
+
+	pwm12_pins_a: pwm12-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 11, AF9)>; /* TIM12_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm12_sleep_pins_a: pwm12-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 11, ANALOG)>; /* TIM12_CH2 */
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
@@ -158,6 +406,20 @@
 		};
 	};
 
+	tim10_counter_pins_a: tim10-counter-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 9, AF9)>; /* TIM10_CH1 */
+			bias-disable;
+		};
+	};
+
+	tim10_counter_sleep_pins_a: tim10-counter-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* TIM10_CH1 */
+			bias-disable;
+		};
+	};
+
 	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 6fe12e3bd7dd..a8e6e0f77b83 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/st,stm32mp25-rcc.h>
 #include <dt-bindings/regulator/st,stm32mp25-regulator.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
 	#address-cells = <2>;
@@ -51,6 +52,12 @@
 			compatible = "fixed-clock";
 			clock-frequency = <64000000>;
 		};
+
+		clk_flexgen_27_fixed: clk-54000000 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <54000000>;
+		};
 	};
 
 	firmware {
@@ -114,14 +121,22 @@
 	};
 
 	intc: interrupt-controller@4ac00000 {
-		compatible = "arm,cortex-a7-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0x0 0x4ac10000 0x0 0x1000>,
-		      <0x0 0x4ac20000 0x0 0x2000>,
-		      <0x0 0x4ac40000 0x0 0x2000>,
-		      <0x0 0x4ac60000 0x0 0x2000>;
+		      <0x0 0x4ac20000 0x0 0x20000>,
+		      <0x0 0x4ac40000 0x0 0x20000>,
+		      <0x0 0x4ac60000 0x0 0x20000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		v2m0: v2m@48090000 {
+			compatible = "arm,gic-v2m-frame";
+			reg = <0x0 0x48090000 0x0 0x1000>;
+			msi-controller;
+		};
 	};
 
 	psci {
@@ -150,7 +165,7 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-		always-on;
+		arm,no-tick-in-suspend;
 	};
 
 	soc@0 {
@@ -229,6 +244,60 @@
 			#dma-cells = <3>;
 		};
 
+		ommanager: ommanager@40500000 {
+			compatible = "st,stm32mp25-omm";
+			reg = <0x40500000 0x400>, <0x60000000 0x10000000>;
+			reg-names = "regs", "memory_map";
+			ranges = <0 0 0x40430000 0x400>,
+				 <1 0 0x40440000 0x400>;
+			clocks = <&rcc CK_BUS_OSPIIOM>,
+				 <&scmi_clk CK_SCMI_OSPI1>,
+				 <&scmi_clk CK_SCMI_OSPI2>;
+			clock-names = "omm", "ospi1", "ospi2";
+			resets = <&rcc OSPIIOM_R>,
+				 <&scmi_reset RST_SCMI_OSPI1>,
+				 <&scmi_reset RST_SCMI_OSPI2>;
+			reset-names = "omm", "ospi1", "ospi2";
+			access-controllers = <&rifsc 111>;
+			power-domains = <&CLUSTER_PD>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			st,syscfg-amcr = <&syscfg 0x2c00 0x7>;
+			status = "disabled";
+
+			ospi1: spi@0 {
+				compatible = "st,stm32mp25-ospi";
+				reg = <0 0 0x400>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&hpdma 2 0x62 0x3121>,
+				       <&hpdma 2 0x42 0x3112>;
+				dma-names = "tx", "rx";
+				clocks = <&scmi_clk CK_SCMI_OSPI1>;
+				resets = <&scmi_reset RST_SCMI_OSPI1>,
+					 <&scmi_reset RST_SCMI_OSPI1DLL>;
+				access-controllers = <&rifsc 74>;
+				power-domains = <&CLUSTER_PD>;
+				st,syscfg-dlyb = <&syscfg 0x1000>;
+				status = "disabled";
+			};
+
+			ospi2: spi@1 {
+				compatible = "st,stm32mp25-ospi";
+				reg = <1 0 0x400>;
+				interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&hpdma 3 0x62 0x3121>,
+				       <&hpdma 3 0x42 0x3112>;
+				dma-names = "tx", "rx";
+				clocks = <&scmi_clk CK_SCMI_OSPI2>;
+				resets = <&scmi_reset RST_SCMI_OSPI2>,
+					 <&scmi_reset RST_SCMI_OSPI2DLL>;
+				access-controllers = <&rifsc 75>;
+				power-domains = <&CLUSTER_PD>;
+				st,syscfg-dlyb = <&syscfg 0x1400>;
+				status = "disabled";
+			};
+		};
+
 		rifsc: bus@42080000 {
 			compatible = "st,stm32mp25-rifsc", "simple-bus";
 			reg = <0x42080000 0x1000>;
@@ -237,6 +306,360 @@
 			#access-controller-cells = <1>;
 			ranges;
 
+			timers2: timer@40000000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40000000 0x400>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM2>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 1>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@1 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <1>;
+					status = "disabled";
+				};
+			};
+
+			timers3: timer@40010000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40010000 0x400>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM3>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 2>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@2 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <2>;
+					status = "disabled";
+				};
+			};
+
+			timers4: timer@40020000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40020000 0x400>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM4>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 3>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@3 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <3>;
+					status = "disabled";
+				};
+			};
+
+			timers5: timer@40030000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40030000 0x400>;
+				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM5>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 4>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@4 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+
+			timers6: timer@40040000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40040000 0x400>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM6>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 5>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				timer@5 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <5>;
+					status = "disabled";
+				};
+			};
+
+			timers7: timer@40050000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40050000 0x400>;
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM7>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 6>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				timer@6 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <6>;
+					status = "disabled";
+				};
+			};
+
+			timers12: timer@40060000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40060000 0x400>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM12>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 10>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@11 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <11>;
+					status = "disabled";
+				};
+			};
+
+			timers13: timer@40070000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40070000 0x400>;
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM13>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 11>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@12 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <12>;
+					status = "disabled";
+				};
+			};
+
+			timers14: timer@40080000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40080000 0x400>;
+				interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM14>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 12>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@13 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <13>;
+					status = "disabled";
+				};
+			};
+
+			lptimer1: timer@40090000 {
+				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
+				reg = <0x40090000 0x400>;
+				interrupts-extended = <&exti1 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LPTIM1>;
+				clock-names = "mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 17>;
+				power-domains = <&RET_PD>;
+				wakeup-source;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-lptimer-counter", "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm-lp", "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32mp25-lptimer-timer", "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+
+				trigger@0 {
+					compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
+					reg = <0>;
+					status = "disabled";
+				};
+			};
+
+			lptimer2: timer@400a0000 {
+				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
+				reg = <0x400a0000 0x400>;
+				interrupts-extended = <&exti1 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LPTIM2>;
+				clock-names = "mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 18>;
+				power-domains = <&RET_PD>;
+				wakeup-source;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-lptimer-counter", "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm-lp", "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32mp25-lptimer-timer", "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+
+				trigger@1 {
+					compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
+					reg = <1>;
+					status = "disabled";
+				};
+			};
+
+			i2s2: audio-controller@400b0000 {
+				compatible = "st,stm32mp25-i2s";
+				reg = <0x400b0000 0x400>;
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_BUS_SPI2>, <&rcc CK_KER_SPI2>;
+				clock-names = "pclk", "i2sclk";
+				resets = <&rcc SPI2_R>;
+				dmas = <&hpdma 51 0x43 0x12>,
+				       <&hpdma 52 0x43 0x21>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 23>;
+				status = "disabled";
+			};
+
 			spi2: spi@400b0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -252,6 +675,21 @@
 				status = "disabled";
 			};
 
+			i2s3: audio-controller@400c0000 {
+				compatible = "st,stm32mp25-i2s";
+				reg = <0x400c0000 0x400>;
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_BUS_SPI3>, <&rcc CK_KER_SPI3>;
+				clock-names = "pclk", "i2sclk";
+				resets = <&rcc SPI3_R>;
+				dmas = <&hpdma 53 0x43 0x12>,
+				       <&hpdma 54 0x43 0x21>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 24>;
+				status = "disabled";
+			};
+
 			spi3: spi@400c0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -267,6 +705,20 @@
 				status = "disabled";
 			};
 
+			spdifrx: audio-controller@400d0000 {
+				compatible = "st,stm32h7-spdifrx";
+				#sound-dai-cells = <0>;
+				reg = <0x400d0000 0x400>;
+				clocks = <&rcc CK_KER_SPDIFRX>;
+				clock-names = "kclk";
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&hpdma 71 0x43 0x212>,
+				       <&hpdma 72 0x43 0x212>;
+				dma-names = "rx", "rx-ctrl";
+				access-controllers = <&rifsc 30>;
+				status = "disabled";
+			};
+
 			usart2: serial@400e0000 {
 				compatible = "st,stm32h7-uart";
 				reg = <0x400e0000 0x400>;
@@ -427,6 +879,136 @@
 				status = "disabled";
 			};
 
+			timers10: timer@401c0000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x401c0000 0x400>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM10>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 8>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@9 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <9>;
+					status = "disabled";
+				};
+			};
+
+			timers11: timer@401d0000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x401d0000 0x400>;
+				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM11>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 9>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@10 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <10>;
+					status = "disabled";
+				};
+			};
+
+			timers1: timer@40200000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40200000 0x400>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "brk", "up", "trg-com", "cc";
+				clocks = <&rcc CK_KER_TIM1>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 0>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@0 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <0>;
+					status = "disabled";
+				};
+			};
+
+			timers8: timer@40210000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40210000 0x400>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "brk", "up", "trg-com", "cc";
+				clocks = <&rcc CK_KER_TIM8>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 7>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@7 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <7>;
+					status = "disabled";
+				};
+			};
+
 			usart6: serial@40220000 {
 				compatible = "st,stm32h7-uart";
 				reg = <0x40220000 0x400>;
@@ -439,6 +1021,21 @@
 				status = "disabled";
 			};
 
+			i2s1: audio-controller@40230000 {
+				compatible = "st,stm32mp25-i2s";
+				reg = <0x40230000 0x400>;
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_BUS_SPI1>, <&rcc CK_KER_SPI1>;
+				clock-names = "pclk", "i2sclk";
+				resets = <&rcc SPI1_R>;
+				dmas = <&hpdma 49 0x43 0x12>,
+				       <&hpdma 50 0x43 0x21>;
+				dma-names = "rx", "tx";
+				access-controllers = <&rifsc 22>;
+				status = "disabled";
+			};
+
 			spi1: spi@40230000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -469,6 +1066,99 @@
 				status = "disabled";
 			};
 
+			timers15: timer@40250000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40250000 0x400>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM15>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 13>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@14 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <14>;
+					status = "disabled";
+				};
+			};
+
+			timers16: timer@40260000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40260000 0x400>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM16>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 14>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@15 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <15>;
+					status = "disabled";
+				};
+			};
+
+			timers17: timer@40270000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40270000 0x400>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM17>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 15>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@16 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <16>;
+					status = "disabled";
+				};
+			};
+
 			spi5: spi@40280000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -484,6 +1174,108 @@
 				status = "disabled";
 			};
 
+			sai1: sai@40290000 {
+				compatible = "st,stm32mp25-sai";
+				reg = <0x40290000 0x4>, <0x4029a3f0 0x10>;
+				ranges = <0 0x40290000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&rcc CK_BUS_SAI1>;
+				clock-names = "pclk";
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI1_R>;
+				access-controllers = <&rifsc 49>;
+				status = "disabled";
+
+				sai1a: audio-controller@40290004 {
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI1>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 73 0x43 0x21>;
+					status = "disabled";
+				};
+
+				sai1b: audio-controller@40290024 {
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI1>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 74 0x43 0x12>;
+					status = "disabled";
+				};
+			};
+
+			sai2: sai@402a0000 {
+				compatible = "st,stm32mp25-sai";
+				reg = <0x402a0000 0x4>, <0x402aa3f0 0x10>;
+				ranges = <0 0x402a0000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&rcc CK_BUS_SAI2>;
+				clock-names = "pclk";
+				interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI2_R>;
+				access-controllers = <&rifsc 50>;
+				status = "disabled";
+
+				sai2a: audio-controller@402a0004 {
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI2>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 75 0x43 0x21>;
+					status = "disabled";
+				};
+
+				sai2b: audio-controller@402a0024 {
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI2>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 76 0x43 0x12>;
+					status = "disabled";
+				};
+			};
+
+			sai3: sai@402b0000 {
+				compatible = "st,stm32mp25-sai";
+				reg = <0x402b0000 0x4>, <0x402ba3f0 0x10>;
+				ranges = <0 0x402b0000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&rcc CK_BUS_SAI3>;
+				clock-names = "pclk";
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI3_R>;
+				access-controllers = <&rifsc 51>;
+				status = "disabled";
+
+				sai3a: audio-controller@402b0004 {
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI3>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 77 0x43 0x21>;
+					status = "disabled";
+				};
+
+				sai3b: audio-controller@502b0024 {
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI3>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 78 0x43 0x12>;
+					status = "disabled";
+				};
+			};
+
 			uart9: serial@402c0000 {
 				compatible = "st,stm32h7-uart";
 				reg = <0x402c0000 0x400>;
@@ -496,6 +1288,40 @@
 				status = "disabled";
 			};
 
+			timers20: timer@40320000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40320000 0x400>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "brk", "up", "trg-com", "cc";
+				clocks = <&rcc CK_KER_TIM20>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 16>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@19 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <19>;
+					status = "disabled";
+				};
+			};
+
 			usart1: serial@40330000 {
 				compatible = "st,stm32h7-uart";
 				reg = <0x40330000 0x400>;
@@ -508,6 +1334,40 @@
 				status = "disabled";
 			};
 
+			sai4: sai@40340000 {
+				compatible = "st,stm32mp25-sai";
+				reg = <0x40340000 0x4>, <0x4034a3f0 0x10>;
+				ranges = <0 0x40340000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				clocks = <&rcc CK_BUS_SAI4>;
+				clock-names = "pclk";
+				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc SAI4_R>;
+				access-controllers = <&rifsc 52>;
+				status = "disabled";
+
+				sai4a: audio-controller@40340004 {
+					compatible = "st,stm32-sai-sub-a";
+					reg = <0x4 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI4>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 79 0x63 0x21>;
+					status = "disabled";
+				};
+
+				sai4b: audio-controller@40340024 {
+					compatible = "st,stm32-sai-sub-b";
+					reg = <0x24 0x20>;
+					#sound-dai-cells = <0>;
+					clocks = <&rcc CK_KER_SAI4>;
+					clock-names = "sai_ck";
+					dmas = <&hpdma 80 0x43 0x12>;
+					status = "disabled";
+				};
+			};
+
 			spi6: spi@40350000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -603,6 +1463,161 @@
 				status = "disabled";
 			};
 
+			lptimer3: timer@46050000 {
+				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
+				reg = <0x46050000 0x400>;
+				interrupts-extended = <&exti2 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LPTIM3>;
+				clock-names = "mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 19>;
+				wakeup-source;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-lptimer-counter", "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm-lp", "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32mp25-lptimer-timer", "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+
+				trigger@2 {
+					compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
+					reg = <2>;
+					status = "disabled";
+				};
+			};
+
+			lptimer4: timer@46060000 {
+				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
+				reg = <0x46060000 0x400>;
+				interrupts-extended = <&exti2 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LPTIM4>;
+				clock-names = "mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 20>;
+				wakeup-source;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-lptimer-counter", "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm-lp", "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32mp25-lptimer-timer", "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+
+				trigger@3 {
+					compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
+					reg = <3>;
+					status = "disabled";
+				};
+			};
+
+			lptimer5: timer@46070000 {
+				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
+				reg = <0x46070000 0x400>;
+				interrupts-extended = <&exti2 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LPTIM5>;
+				clock-names = "mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 21>;
+				wakeup-source;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-lptimer-counter", "st,stm32-lptimer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm-lp", "st,stm32-pwm-lp";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer {
+					compatible = "st,stm32mp25-lptimer-timer", "st,stm32-lptimer-timer";
+					status = "disabled";
+				};
+
+				trigger@4 {
+					compatible = "st,stm32mp25-lptimer-trigger", "st,stm32-lptimer-trigger";
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+
+			ltdc: display-controller@48010000 {
+				compatible = "st,stm32mp251-ltdc";
+				reg = <0x48010000 0x400>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LTDC>, <&rcc CK_BUS_LTDC>;
+				clock-names = "lcd", "bus";
+				resets = <&rcc LTDC_R>;
+				access-controllers = <&rifsc 80>;
+				status = "disabled";
+			};
+
+			csi: csi@48020000 {
+				compatible = "st,stm32mp25-csi";
+				reg = <0x48020000 0x2000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc CSI_R>;
+				clocks = <&rcc CK_KER_CSI>, <&rcc CK_KER_CSITXESC>,
+					 <&rcc CK_KER_CSIPHY>;
+				clock-names = "pclk", "txesc", "csi2phy";
+				access-controllers = <&rifsc 86>;
+				status = "disabled";
+			};
+
+			dcmipp: dcmipp@48030000 {
+				compatible = "st,stm32mp25-dcmipp";
+				reg = <0x48030000 0x1000>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc DCMIPP_R>;
+				clocks = <&rcc CK_BUS_DCMIPP>, <&rcc CK_KER_CSI>;
+				clock-names = "kclk", "mclk";
+				access-controllers = <&rifsc 87>;
+				status = "disabled";
+			};
+
+			combophy: phy@480c0000 {
+				compatible = "st,stm32mp25-combophy";
+				reg = <0x480c0000 0x1000>;
+				#phy-cells = <1>;
+				clocks = <&rcc CK_BUS_USB3PCIEPHY>, <&rcc CK_KER_USB3PCIEPHY>;
+				clock-names = "apb", "ker";
+				resets = <&rcc USB3PCIEPHY_R>;
+				reset-names = "phy";
+				access-controllers = <&rifsc 67>;
+				power-domains = <&CLUSTER_PD>;
+				wakeup-source;
+				interrupts-extended = <&exti1 45 IRQ_TYPE_EDGE_FALLING>;
+				status = "disabled";
+			};
+
 			sdmmc1: mmc@48220000 {
 				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00353180>;
@@ -666,6 +1681,56 @@
 					snps,wr_osr_lmt = <0x7>;
 				};
 			};
+
+			pcie_ep: pcie-ep@48400000 {
+				compatible = "st,stm32mp25-pcie-ep";
+				reg = <0x48400000 0x100000>,
+				      <0x48500000 0x100000>,
+				      <0x48700000 0x80000>,
+				      <0x10000000 0x10000000>;
+				reg-names = "dbi", "dbi2", "atu", "addr_space";
+				clocks = <&rcc CK_BUS_PCIE>;
+				resets = <&rcc PCIE_R>;
+				phys = <&combophy PHY_TYPE_PCIE>;
+				access-controllers = <&rifsc 68>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+			};
+
+			pcie_rc: pcie@48400000 {
+				compatible = "st,stm32mp25-pcie-rc";
+				device_type = "pci";
+				reg = <0x48400000 0x400000>,
+				      <0x10000000 0x10000>;
+				reg-names = "dbi", "config";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+						<0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+						<0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+						<0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x00000000 0x10010000 0x0 0x10000>,
+					 <0x02000000 0x0 0x10020000 0x10020000 0x0 0x7fe0000>,
+					 <0x42000000 0x0 0x18000000 0x18000000 0x0 0x8000000>;
+				dma-ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x80000000>;
+				clocks = <&rcc CK_BUS_PCIE>;
+				resets = <&rcc PCIE_R>;
+				msi-parent = <&v2m0>;
+				access-controllers = <&rifsc 68>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				pcie@0,0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					phys = <&combophy PHY_TYPE_PCIE>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
+			};
 		};
 
 		bsec: efuse@44000000 {
@@ -684,6 +1749,13 @@
 			};
 		};
 
+		hdp: pinctrl@44090000 {
+			compatible = "st,stm32mp251-hdp";
+			reg = <0x44090000 0x400>;
+			clocks = <&rcc CK_BUS_HDP>;
+			status = "disabled";
+		};
+
 		rcc: clock-controller@44200000 {
 			compatible = "st,stm32mp25-rcc";
 			reg = <0x44200000 0x10000>;
@@ -868,6 +1940,7 @@
 		syscfg: syscon@44230000 {
 			compatible = "st,stm32mp25-syscfg", "syscon";
 			reg = <0x44230000 0x10000>;
+			#clock-cells = <0>;
 		};
 
 		pinctrl: pinctrl@44240000 {
@@ -1031,7 +2104,6 @@
 				st,bank-ioport = <11>;
 				status = "disabled";
 			};
-
 		};
 
 		exti2: interrupt-controller@46230000 {
diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi
index f689b47c5010..7a598f53a2a0 100644
--- a/arch/arm64/boot/dts/st/stm32mp255.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi
@@ -5,7 +5,25 @@
  */
 #include "stm32mp253.dtsi"
 
+&ltdc {
+	compatible = "st,stm32mp255-ltdc";
+	clocks = <&clk_flexgen_27_fixed>, <&rcc CK_BUS_LTDC>, <&syscfg>, <&lvds>;
+	clock-names = "lcd", "bus", "ref", "lvds";
+};
+
 &rifsc {
+	lvds: lvds@48060000 {
+		compatible = "st,stm32mp255-lvds", "st,stm32mp25-lvds";
+		reg = <0x48060000 0x2000>;
+		#clock-cells = <0>;
+		clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
+		clock-names = "pclk", "ref";
+		resets = <&rcc LVDS_R>;
+		access-controllers = <&rifsc 84>;
+		power-domains = <&CLUSTER_PD>;
+		status = "disabled";
+	};
+
 	vdec: vdec@480d0000 {
 		compatible = "st,stm32mp25-vdec";
 		reg = <0x480d0000 0x3c8>;
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
new file mode 100644
index 000000000000..e718d888ce21
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "stm32mp257.dtsi"
+#include "stm32mp25xf.dtsi"
+#include "stm32mp25-pinctrl.dtsi"
+#include "stm32mp25xxak-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP257F-DK Discovery Board";
+	compatible = "st,stm32mp257f-dk", "st,stm32mp257";
+
+	aliases {
+		ethernet0 = &ethernet1;
+		serial0 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user-1 {
+			label = "User-1";
+			linux,code = <BTN_1>;
+			gpios = <&gpioc 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-user-2 {
+			label = "User-2";
+			linux,code = <BTN_2>;
+			gpios = <&gpioc 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpioh 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		fw@80000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x4000000>;
+			no-map;
+		};
+	};
+};
+
+&arm_wdt {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&ethernet1 {
+	pinctrl-0 = <&eth1_rgmii_pins_b>;
+	pinctrl-1 = <&eth1_rgmii_sleep_pins_b>;
+	pinctrl-names = "default", "sleep";
+	phy-handle = <&phy1_eth1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1_eth1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <1>;
+			reset-gpios =  <&gpioa 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+		};
+	};
+};
+
+&scmi_regu {
+	scmi_vddio1: regulator@0 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+	scmi_vdd_sdcard: regulator@23 {
+		reg = <VOLTD_SCMI_STPMIC2_LDO7>;
+		regulator-name = "vdd_sdcard";
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpiod 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&scmi_vdd_sdcard>;
+	vqmmc-supply = <&scmi_vddio1>;
+	status = "okay";
+};
+
+&usart2 {
+	pinctrl-names = "default", "idle", "sleep";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_idle_pins_a>;
+	pinctrl-2 = <&usart2_sleep_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 6f393b082789..bb6d6393d2e4 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -19,6 +19,7 @@
 
 	aliases {
 		ethernet0 = &ethernet2;
+		ethernet1 = &ethernet1;
 		serial0 = &usart2;
 		serial1 = &usart6;
 	};
@@ -27,11 +28,85 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		pad_clk: pad-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
+	};
+
+	imx335_2v9: regulator-2v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "imx335-avdd";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-always-on;
+	};
+
+	imx335_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "imx335-ovdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	imx335_1v2: regulator-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "imx335-dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x1 0x0>;
 	};
 
+	panel_lvds: display {
+		compatible = "edt,etml0700z9ndha", "panel-lvds";
+		enable-gpios = <&gpiog 15 GPIO_ACTIVE_HIGH>;
+		backlight = <&panel_lvds_backlight>;
+		power-supply = <&scmi_v3v3>;
+		width-mm = <156>;
+		height-mm = <92>;
+		data-mapping = "vesa-24";
+		status = "okay";
+
+		panel-timing {
+			clock-frequency = <54000000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <150>;
+			hback-porch = <150>;
+			hsync-len = <21>;
+			vfront-porch = <24>;
+			vback-porch = <24>;
+			vsync-len = <21>;
+		};
+
+		port {
+			lvds_panel_in: endpoint {
+				remote-endpoint = <&lvds_out0>;
+			};
+		};
+	};
+
+	panel_lvds_backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -42,6 +117,11 @@
 			reg = <0x0 0x80000000 0x0 0x4000000>;
 			no-map;
 		};
+
+		mm_ospi1: mm-ospi@60000000 {
+			reg = <0x0 0x60000000 0x0 0x10000000>;
+			no-map;
+		};
 	};
 };
 
@@ -50,6 +130,69 @@
 	status = "okay";
 };
 
+&combophy {
+	clocks = <&rcc CK_BUS_USB3PCIEPHY>, <&rcc CK_KER_USB3PCIEPHY>, <&pad_clk>;
+	clock-names = "apb", "ker", "pad";
+	status = "okay";
+};
+
+&csi {
+	vdd-supply = <&scmi_vddcore>;
+	vdda18-supply = <&scmi_v1v8>;
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			csi_sink: endpoint {
+				remote-endpoint = <&imx335_ep>;
+				data-lanes = <1 2>;
+				bus-type = <4>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			csi_source: endpoint {
+				remote-endpoint = <&dcmipp_0>;
+			};
+		};
+	};
+};
+
+&dcmipp {
+	status = "okay";
+	port {
+		dcmipp_0: endpoint {
+			remote-endpoint = <&csi_source>;
+			bus-type = <4>;
+		};
+	};
+};
+
+&ethernet1 {
+	pinctrl-0 = <&eth1_rgmii_pins_a &eth1_mdio_pins_a>;
+	pinctrl-1 = <&eth1_rgmii_sleep_pins_a &eth1_mdio_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-handle = <&phy1_eth1>;
+	phy-mode = "rgmii-id";
+	st,ext-phyclk;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1_eth1: ethernet-phy@4 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <4>;
+			reset-gpios =  <&gpioj 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+		};
+	};
+};
+
 &ethernet2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth2_rgmii_pins_a>;
@@ -68,7 +211,7 @@
 			reg = <1>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <300>;
-			reset-gpios =  <&gpiog 6 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
@@ -81,6 +224,34 @@
 	i2c-scl-falling-time-ns = <13>;
 	clock-frequency = <400000>;
 	status = "okay";
+
+	imx335: camera@1a {
+		compatible = "sony,imx335";
+		reg = <0x1a>;
+		clocks = <&clk_ext_camera>;
+		avdd-supply = <&imx335_2v9>;
+		ovdd-supply = <&imx335_1v8>;
+		dvdd-supply = <&imx335_1v2>;
+		reset-gpios = <&gpioi 7 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+
+		port {
+			imx335_ep: endpoint {
+				remote-endpoint = <&csi_sink>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <594000000>;
+			};
+		};
+	};
+
+	ili2511: ili2511@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		interrupt-parent = <&gpioi>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpiog 14 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
 };
 
 &i2c8 {
@@ -93,6 +264,94 @@
 	status = "disabled";
 };
 
+&ommanager {
+	memory-region = <&mm_ospi1>;
+	memory-region-names = "ospi1";
+	pinctrl-0 = <&ospi_port1_clk_pins_a
+		     &ospi_port1_io03_pins_a
+		     &ospi_port1_cs0_pins_a>;
+	pinctrl-1 = <&ospi_port1_clk_sleep_pins_a
+		     &ospi_port1_io03_sleep_pins_a
+		     &ospi_port1_cs0_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	spi@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		memory-region = <&mm_ospi1>;
+		status = "okay";
+
+		flash0: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-rx-bus-width = <4>;
+			spi-tx-bus-width = <4>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+};
+
+/* use LPTIMER with tick broadcast for suspend mode */
+&lptimer3 {
+	status = "okay";
+	timer {
+		status = "okay";
+	};
+};
+
+&ltdc {
+	status = "okay";
+	port {
+		ltdc_ep0_out: endpoint {
+			remote-endpoint = <&lvds_in>;
+		};
+	};
+};
+
+&lvds {
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			lvds_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			lvds_out0: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+};
+
+&pcie_ep {
+	pinctrl-names = "default", "init";
+	pinctrl-0 = <&pcie_pins_a>;
+	pinctrl-1 = <&pcie_init_pins_a>;
+	reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&pcie_rc {
+	pinctrl-names = "default", "init", "sleep";
+	pinctrl-0 = <&pcie_pins_a>;
+	pinctrl-1 = <&pcie_init_pins_a>;
+	pinctrl-2 = <&pcie_sleep_pins_a>;
+	status = "okay";
+
+	pcie@0,0 {
+		 reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+		 wake-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	};
+};
+
 &rtc {
 	status = "okay";
 };
@@ -156,6 +415,64 @@
 	status = "disabled";
 };
 
+&timers3 {
+	status = "disabled";
+	counter {
+		status = "okay";
+	};
+	pwm {
+		pinctrl-0 = <&pwm3_pins_a>;
+		pinctrl-1 = <&pwm3_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers8 {
+	status = "disabled";
+	counter {
+		status = "okay";
+	};
+	pwm {
+		pinctrl-0 = <&pwm8_pins_a>;
+		pinctrl-1 = <&pwm8_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@7 {
+		status = "okay";
+	};
+};
+
+&timers10 {
+	status = "disabled";
+	counter {
+		pinctrl-0 = <&tim10_counter_pins_a>;
+		pinctrl-1 = <&tim10_counter_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&timers12 {
+	status = "disabled";
+	counter {
+		status = "okay";
+	};
+	pwm {
+		pinctrl-0 = <&pwm12_pins_a>;
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@11 {
+		status = "okay";
+	};
+};
+
 &usart2 {
 	pinctrl-names = "default", "idle", "sleep";
 	pinctrl-0 = <&usart2_pins_a>;
diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts
index 8d7794642900..9ff22e1c8723 100644
--- a/arch/arm64/boot/dts/tesla/fsd-evb.dts
+++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
@@ -64,6 +64,26 @@
 	};
 };
 
+&ethernet0 {
+	status = "okay";
+
+	phy-mode = "rgmii-id";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&ethernet1 {
+	status = "okay";
+
+	phy-mode = "rgmii-id";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
 &fin_pll {
 	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
index 3f898cf4874c..6f4658f57453 100644
--- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -64,6 +64,62 @@
 		samsung,pin-pud = <FSD_PIN_PULL_UP>;
 		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
+
+	eth0_tx_clk: eth0-tx-clk-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_tx_data: eth0-tx-data-pins {
+		samsung,pins = "gpf0-1", "gpf0-2", "gpf0-3", "gpf0-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_tx_ctrl: eth0-tx-ctrl-pins {
+		samsung,pins = "gpf0-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_phy_intr: eth0-phy-intr-pins {
+		samsung,pins = "gpf0-6";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	eth0_rx_clk: eth0-rx-clk-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_rx_data: eth0-rx-data-pins {
+		samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3", "gpf1-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_rx_ctrl: eth0-rx-ctrl-pins {
+		samsung,pins = "gpf1-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth0_mdio: eth0-mdio-pins {
+		samsung,pins = "gpf1-6", "gpf1-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_NONE>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
 };
 
 &pinctrl_peric {
@@ -381,6 +437,62 @@
 		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
 		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
+
+	eth1_tx_clk: eth1-tx-clk-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_tx_data: eth1-tx-data-pins {
+		samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_tx_ctrl: eth1-tx-ctrl-pins {
+		samsung,pins = "gpf2-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_phy_intr: eth1-phy-intr-pins {
+		samsung,pins = "gpf2-6";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	eth1_rx_clk: eth1-rx-clk-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_rx_data: eth1-rx-data-pins {
+		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_rx_ctrl: eth1-rx-ctrl-pins {
+		samsung,pins = "gpf3-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_mdio: eth1-mdio-pins {
+		samsung,pins = "gpf3-6", "gpf3-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
 };
 
 &pinctrl_pmu {
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
index 690b4ed9c29b..5b06e2667b89 100644
--- a/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -92,7 +92,7 @@
 				reg = <0x0 0x000>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -108,7 +108,7 @@
 				reg = <0x0 0x001>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -124,7 +124,7 @@
 				reg = <0x0 0x002>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -139,7 +139,7 @@
 				compatible = "arm,cortex-a72";
 				reg = <0x0 0x003>;
 				enable-method = "psci";
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -156,7 +156,7 @@
 				reg = <0x0 0x100>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -172,7 +172,7 @@
 				reg = <0x0 0x101>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -188,7 +188,7 @@
 				reg = <0x0 0x102>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -204,7 +204,7 @@
 				reg = <0x0 0x103>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -221,7 +221,7 @@
 				reg = <0x0 0x200>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -237,7 +237,7 @@
 				reg = <0x0 0x201>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -253,7 +253,7 @@
 				reg = <0x0 0x202>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -269,7 +269,7 @@
 				reg = <0x0 0x203>;
 				enable-method = "psci";
 				clock-frequency = <2400000000>;
-				cpu-idle-states = <&CPU_SLEEP>;
+				cpu-idle-states = <&cpu_sleep>;
 				i-cache-size = <0xc000>;
 				i-cache-line-size = <64>;
 				i-cache-sets = <256>;
@@ -291,7 +291,7 @@
 		idle-states {
 			entry-method = "psci";
 
-			CPU_SLEEP: cpu-sleep {
+			cpu_sleep: cpu-sleep {
 				idle-state-name = "c2";
 				compatible = "arm,idle-state";
 				local-timer-stop;
@@ -363,6 +363,7 @@
 
 		gic: interrupt-controller@10400000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0x10400000 0x0 0x10000>, /* GICD */
@@ -979,6 +980,36 @@
 			memory-region = <&mfc_left>;
 		};
 
+		ethernet1: ethernet@14300000 {
+			compatible = "tesla,fsd-ethqos";
+			reg = <0x0 0x14300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_ACLK_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_HCLK_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_RGMII_CLK_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_RX_I>,
+				 <&clock_peric PERIC_BUS_D_PERIC_IPCLKPORT_EQOSCLK>,
+				 <&clock_peric PERIC_BUS_P_PERIC_IPCLKPORT_EQOSCLK>,
+				 <&clock_peric PERIC_EQOS_PHYRXCLK_MUX>,
+				 <&clock_peric PERIC_EQOS_PHYRXCLK>,
+				 <&clock_peric PERIC_DOUT_RGMII_CLK>;
+			clock-names = "ptp_ref", "master_bus", "slave_bus", "tx", "rx",
+				      "master2_bus", "slave2_bus", "eqos_rxclk_mux",
+				      "eqos_phyrxclk", "dout_peric_rgmii_clk";
+			assigned-clocks = <&clock_peric PERIC_EQOS_PHYRXCLK_MUX>,
+					  <&clock_peric PERIC_EQOS_PHYRXCLK>;
+			assigned-clock-parents = <&clock_peric PERIC_EQOS_PHYRXCLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&eth1_tx_clk>, <&eth1_tx_data>, <&eth1_tx_ctrl>,
+				    <&eth1_phy_intr>, <&eth1_rx_clk>, <&eth1_rx_data>,
+				    <&eth1_rx_ctrl>, <&eth1_mdio>;
+			local-mac-address = [00 00 00 00 00 00];
+			iommus = <&smmu_peric 0x0 0x1>;
+			status = "disabled";
+		};
+
 		ufs: ufs@15120000 {
 			compatible = "tesla,fsd-ufs";
 			reg = <0x0 0x15120000 0x0 0x200>,  /* 0: HCI standard */
@@ -1007,6 +1038,26 @@
 			clocks = <&clock_fsys0 UFS0_MPHY_REFCLK_IXTAL26>;
 			clock-names = "ref_clk";
 		};
+
+		ethernet0: ethernet@15300000 {
+			compatible = "tesla,fsd-ethqos";
+			reg = <0x0 0x15300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_CLK_PTP_REF_I>,
+				 <&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_ACLK_I>,
+				 <&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_HCLK_I>,
+				 <&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_RGMII_CLK_I>,
+				 <&clock_fsys0 FSYS0_EQOS_TOP0_IPCLKPORT_CLK_RX_I>;
+			clock-names = "ptp_ref", "master_bus", "slave_bus", "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&eth0_tx_clk>, <&eth0_tx_data>, <&eth0_tx_ctrl>,
+				    <&eth0_phy_intr>, <&eth0_rx_clk>, <&eth0_rx_data>,
+				    <&eth0_rx_ctrl>, <&eth0_mdio>;
+			local-mac-address = [00 00 00 00 00 00];
+			iommus = <&smmu_fsys0 0x0 0x1>;
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index f71360f14f23..ba01a929e06f 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -27,13 +27,32 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-nand.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62-pocketbeagle2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6254atl-sk.dtb
 
 # Boards with AM62Ax SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb
 
+# Boards with AM62Dx SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb
+
+# Boards with AM62Lx SoCs
+dtb-$(CONFIG_ARCH_K3) += k3-am62l3-evm.dtb
+
 # Boards with AM62Px SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-ivy.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-mallow.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-ivy.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-mallow.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-wifi-yavia.dtb
 
 # Common overlays for SK-AM62* family of boards
 dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-ov5640.dtbo
@@ -42,10 +61,6 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
 
 # Boards with AM64x SoC
-k3-am642-hummingboard-t-pcie-dtbs := \
-	k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-pcie.dtbo
-k3-am642-hummingboard-t-usb3-dtbs := \
-	k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-usb3.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac-mii.dtbo
@@ -58,6 +73,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-nand.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-gpio-fan.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-pcie-usb2.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-peb-c-010.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
@@ -102,32 +119,54 @@ dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm-pcie1-ep.dtbo
 
 # Boards with J721e SoC
 k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo
+k3-j721e-evm-gesi-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board-infotainment.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo
 
 # Boards with J721s2 SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
 k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-usb0-type-a.dtbo
 
 # Boards with J722s SoC
+k3-am67a-kontron-sa67-dtbs := k3-am67a-kontron-sa67-base.dtb \
+	k3-am67a-kontron-sa67-rtc-rv8263.dtbo k3-am67a-kontron-sa67-gbe1.dtbo
+k3-am67a-kontron-sa67-ads2-dtbs := k3-am67a-kontron-sa67.dtb k3-am67a-kontron-sa67-ads2.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-base.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-gbe1.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-gpios.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-rtc-rv8263.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-ads2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-ads2.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo
 
 # Boards with J784s4 SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am69-aquila-clover.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am69-aquila-dev.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am69-sk-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-pcie0-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j784s4-j742s2-evm-usb0-type-a.dtbo
 
 # Boards with J742S2 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-j742s2-evm.dtb
@@ -155,6 +194,17 @@ k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \
 	k3-am62x-sk-csi2-tevi-ov5640.dtbo
 k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62-lp-sk-nand-dtbs := k3-am62-lp-sk.dtb k3-am62-lp-sk-nand.dtbo
+k3-am62a7-phyboard-lyra-disable-eth-phy-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-disable-eth-phy.dtbo
+k3-am62a7-phyboard-lyra-disable-rtc-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-disable-rtc.dtbo
+k3-am62a7-phyboard-lyra-disable-spi-nor-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-disable-spi-nor.dtbo
+k3-am62a7-phyboard-lyra-gpio-fan-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am62x-phyboard-lyra-gpio-fan.dtbo
+k3-am62a7-phyboard-lyra-qspi-nor-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
+	k3-am6xx-phycore-qspi-nor.dtbo
 k3-am62a7-sk-csi2-imx219-dtbs := k3-am62a7-sk.dtb \
 	k3-am62x-sk-csi2-imx219.dtbo
 k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \
@@ -186,37 +236,70 @@ k3-am642-phyboard-electra-gpio-fan-dtbs := \
 	k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-gpio-fan.dtbo
 k3-am642-phyboard-electra-pcie-usb2-dtbs := \
 	k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-pcie-usb2.dtbo
+k3-am642-phyboard-electra-x27-gpio1-spi1-uart3-dtbs := \
+	k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtbo
+k3-am642-phyboard-electra-peb-c-010-dtbs := \
+	k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-peb-c-010.dtbo
 k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
 	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
 k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
 	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
+k3-am67a-kontron-sa67-base-gpios-dtbs := \
+	k3-am67a-kontron-sa67-base.dtb k3-am67a-kontron-sa67-gpios.dtbo
 k3-am68-sk-base-board-csi2-dual-imx219-dtbs := k3-am68-sk-base-board.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
+k3-am68-sk-base-board-pcie1-ep-dtbs := k3-am68-sk-base-board.dtb \
+	k3-am68-sk-base-board-pcie1-ep.dtbo
 k3-am69-sk-csi2-dual-imx219-dtbs := k3-am69-sk.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
+k3-am69-sk-pcie0-ep-dtbs := k3-am69-sk.dtb \
+	k3-am69-sk-pcie0-ep.dtbo
 k3-j7200-evm-pcie1-ep-dtbs := k3-j7200-common-proc-board.dtb \
 	k3-j7200-evm-pcie1-ep.dtbo
 k3-j721e-common-proc-board-infotainment-dtbs := k3-j721e-common-proc-board.dtb \
 	k3-j721e-common-proc-board-infotainment.dtbo
 k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
 	k3-j721e-evm-pcie0-ep.dtbo
+k3-j721e-evm-pcie1-ep-dtbs := k3-j721e-common-proc-board.dtb \
+	k3-j721e-evm-pcie1-ep.dtbo
 k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
 k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
 	k3-j721s2-evm-pcie1-ep.dtbo
+k3-j721s2-evm-usb0-type-a-dtbs := k3-j721s2-common-proc-board.dtb \
+	k3-j721s2-evm-usb0-type-a.dtbo
+k3-j722s-evm-csi2-quad-rpi-cam-imx219-dtbs := k3-j722s-evm.dtb \
+	k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo
+k3-j722s-evm-csi2-quad-tevi-ov5640-dtbs := k3-j722s-evm.dtb \
+	k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo
+k3-j742s2-evm-usb0-type-a-dtbs := k3-j742s2-evm.dtb \
+	k3-j784s4-j742s2-evm-usb0-type-a.dtbo
 k3-j784s4-evm-pcie0-pcie1-ep-dtbs := k3-j784s4-evm.dtb \
 	k3-j784s4-evm-pcie0-pcie1-ep.dtbo
 k3-j784s4-evm-quad-port-eth-exp1-dtbs := k3-j784s4-evm.dtb \
 	k3-j784s4-evm-quad-port-eth-exp1.dtbo
+k3-j784s4-evm-usb0-type-a-dtbs := k3-j784s4-evm.dtb \
+	k3-j784s4-j742s2-evm-usb0-type-a.dtbo
 k3-j784s4-evm-usxgmii-exp1-exp2-dtbs := k3-j784s4-evm.dtb \
 	k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
 dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am625-beagleplay-csi2-tevi-ov5640.dtb \
+	k3-am625-phyboard-lyra-disable-eth-phy.dtb \
+	k3-am625-phyboard-lyra-disable-rtc.dtb \
+	k3-am625-phyboard-lyra-disable-spi-nor.dtb \
+	k3-am625-phyboard-lyra-gpio-fan.dtb \
+	k3-am625-phyboard-lyra-qspi-nor.dtb \
 	k3-am625-sk-csi2-imx219.dtb \
 	k3-am625-sk-csi2-ov5640.dtb \
 	k3-am625-sk-csi2-tevi-ov5640.dtb \
 	k3-am625-sk-hdmi-audio.dtb \
 	k3-am62-lp-sk-hdmi-audio.dtb \
+	k3-am62-lp-sk-nand.dtb \
+	k3-am62a7-phyboard-lyra-disable-eth-phy.dtb \
+	k3-am62a7-phyboard-lyra-disable-rtc.dtb \
+	k3-am62a7-phyboard-lyra-disable-spi-nor.dtb \
+	k3-am62a7-phyboard-lyra-gpio-fan.dtb \
+	k3-am62a7-phyboard-lyra-qspi-nor.dtb \
 	k3-am62a7-sk-csi2-imx219.dtb \
 	k3-am62a7-sk-csi2-ov5640.dtb \
 	k3-am62a7-sk-hdmi-audio.dtb \
@@ -226,36 +309,34 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am642-evm-icssg1-dualemac.dtb \
 	k3-am642-evm-icssg1-dualemac-mii.dtb \
 	k3-am642-evm-pcie0-ep.dtb \
+	k3-am642-phyboard-electra-disable-eth-phy.dtb \
+	k3-am642-phyboard-electra-disable-rtc.dtb \
+	k3-am642-phyboard-electra-disable-spi-nor.dtb \
+	k3-am642-phyboard-electra-gpio-fan.dtb \
+	k3-am642-phyboard-electra-pcie-usb2.dtb \
+	k3-am642-phyboard-electra-peb-c-010.dtb \
+	k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtb \
 	k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
 	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
+	k3-am67a-kontron-sa67-base-gpios.dtb \
 	k3-am68-sk-base-board-csi2-dual-imx219.dtb \
+	k3-am68-sk-base-board-pcie1-ep.dtb \
 	k3-am69-sk-csi2-dual-imx219.dtb \
-	k3-j7200-evm-pcie1-ep.dtbo \
+	k3-am69-sk-pcie0-ep.dtb \
+	k3-j7200-evm-pcie1-ep.dtb \
 	k3-j721e-common-proc-board-infotainment.dtb \
 	k3-j721e-evm-pcie0-ep.dtb \
+	k3-j721e-evm-pcie1-ep.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtb \
 	k3-j721s2-evm-pcie1-ep.dtb \
+	k3-j721s2-evm-usb0-type-a.dtb \
+	k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtb \
+	k3-j722s-evm-csi2-quad-tevi-ov5640.dtb \
+	k3-j742s2-evm-usb0-type-a.dtb \
 	k3-j784s4-evm-pcie0-pcie1-ep.dtb \
 	k3-j784s4-evm-quad-port-eth-exp1.dtb \
+	k3-j784s4-evm-usb0-type-a.dtb \
 	k3-j784s4-evm-usxgmii-exp1-exp2.dtb
 
 # Enable support for device-tree overlays
-DTC_FLAGS_k3-am625-beagleplay += -@
-DTC_FLAGS_k3-am625-phyboard-lyra-rdk += -@
-DTC_FLAGS_k3-am62a7-phyboard-lyra-rdk += -@
-DTC_FLAGS_k3-am625-sk += -@
-DTC_FLAGS_k3-am62-lp-sk += -@
-DTC_FLAGS_k3-am62a7-sk += -@
-DTC_FLAGS_k3-am62p5-sk += -@
-DTC_FLAGS_k3-am642-evm += -@
-DTC_FLAGS_k3-am642-phyboard-electra-rdk += -@
-DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
-DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
-DTC_FLAGS_k3-am68-sk-base-board += -@
-DTC_FLAGS_k3-am69-sk += -@
-DTC_FLAGS_k3-j7200-common-proc-board += -@
-DTC_FLAGS_k3-j721e-common-proc-board += -@
-DTC_FLAGS_k3-j721e-sk += -@
-DTC_FLAGS_k3-j721s2-common-proc-board += -@
-DTC_FLAGS_k3-j784s4-evm += -@
-DTC_FLAGS_k3-j742s2-evm += -@
+DTC_FLAGS := -@
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
index 8e9fc00a6b3c..3e2d8f669535 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -7,12 +7,20 @@
 
 /dts-v1/;
 
+#include "k3-am625.dtsi"
 #include "k3-am62x-sk-common.dtsi"
 
 / {
 	compatible = "ti,am62-lp-sk", "ti,am625";
 	model = "Texas Instruments AM62x LP SK";
 
+	memory@80000000 {
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		device_type = "memory";
+		bootph-pre-ram;
+	};
+
 	vmain_pd: regulator-0 {
 		/* TPS65988 PD CONTROLLER OUTPUT */
 		compatible = "regulator-fixed";
@@ -69,20 +77,39 @@
 		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
+		bootph-all;
 	};
 };
 
 &main_pmx0 {
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */
+		>;
+	};
+
 	vddshv_sdio_pins_default: vddshv-sdio-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
 		>;
+		bootph-all;
 	};
 
 	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */
 		>;
+		bootph-all;
 	};
 
 	pmic_irq_pins_default: pmic-irq-default-pins {
@@ -118,6 +145,7 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+		bootph-all;
 	};
 
 	exp2: gpio@23 {
@@ -140,11 +168,23 @@
 	};
 };
 
+&sdhci0 {
+	bootph-all;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	status = "okay";
+};
+
 &sdhci1 {
 	vmmc-supply = <&vdd_mmc1>;
 	vqmmc-supply = <&vddshv_sdio>;
 };
 
+&cpsw3g {
+	status = "okay";
+};
+
 &cpsw_port2 {
 	status = "disabled";
 };
@@ -229,6 +269,74 @@
 	DVDD-supply = <&buck2_reg>;
 };
 
+&main_gpio0 {
+	bootph-all;
+};
+
+&main_gpio1 {
+	bootph-all;
+};
+
 &gpmc0 {
 	ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */
 };
+
+&mcu_mcan0 {
+	pinctrl-names = "default", "wakeup";
+	pinctrl-0 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_default>;
+	pinctrl-1 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_wakeup>;
+	wakeup-source = <&system_partial_io>,
+			<&system_deep_sleep>,
+			<&system_mcu_only>,
+			<&system_standby>;
+	status = "okay";
+};
+
+&mcu_mcan1 {
+	pinctrl-names = "default", "wakeup";
+	pinctrl-0 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_default>;
+	pinctrl-1 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_wakeup>;
+	wakeup-source = <&system_partial_io>,
+			<&system_deep_sleep>,
+			<&system_mcu_only>,
+			<&system_standby>;
+	status = "okay";
+};
+
+&mcu_pmx0 {
+	mcu_mcan0_tx_pins_default: mcu-mcan0-tx-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan0_rx_pins_default: mcu-mcan0-rx-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */
+		>;
+	};
+
+	mcu_mcan0_rx_pins_wakeup: mcu-mcan0-rx-wakeup-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x038, PIN_INPUT | PIN_WKUP_EN, 0) /* (B3) MCU_MCAN0_RX */
+		>;
+	};
+
+	mcu_mcan1_tx_pins_default: mcu-mcan1-tx-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x03c, PIN_OUTPUT, 0) /* (E5) MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_mcan1_rx_pins_default: mcu-mcan1-rx-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x040, PIN_INPUT, 0) /* (D4) MCU_MCAN1_RX */
+		>;
+	};
+
+	mcu_mcan1_rx_pins_wakeup: mcu-mcan1-rx-wakeup-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x040, PIN_INPUT | PIN_WKUP_EN, 0) /* (D4) MCU_MCAN1_RX */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 7cd727d10a5f..c5ee263d34a6 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -23,7 +23,6 @@
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
 		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
-		      <0x00 0x01880000 0x00 0xc0000>,   /* GICR */
 		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
 		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
 		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
@@ -77,6 +76,11 @@
 			assigned-clock-parents = <&k3_clks 157 18>;
 			#clock-cells = <0>;
 		};
+
+		dss_oldi_io_ctrl: oldi-io-controller@8600 {
+			compatible = "ti,am625-dss-oldi-io-ctrl", "syscon";
+			reg = <0x8600 0x200>;
+		};
 	};
 
 	dmss: bus@48000000 {
@@ -210,6 +214,16 @@
 		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
 		       <&main_pktdma 0x7507 0>;
 		dma-names = "tx", "rx1", "rx2";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+
+		rng: rng@40910000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x40910000 0x00 0x7d>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			status = "reserved"; /* Reserved for OP-TEE */
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -553,10 +567,7 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 6>;
-		assigned-clock-parents = <&k3_clks 57 8>;
 		bus-width = <8>;
-		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
@@ -692,12 +703,14 @@
 	};
 
 	gpu: gpu@fd00000 {
-		compatible = "ti,am62-gpu", "img,img-axe";
+		compatible = "ti,am62-gpu", "img,img-axe-1-16m", "img,img-axe",
+			     "img,img-rogue";
 		reg = <0x00 0x0fd00000 0x00 0x20000>;
 		clocks = <&k3_clks 187 0>;
 		clock-names = "core";
 		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+		power-domain-names = "a";
 	};
 
 	cpsw3g: ethernet@8000000 {
@@ -725,6 +738,8 @@
 		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
 			    "tx7", "rx";
 
+		status = "disabled";
+
 		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -790,6 +805,53 @@
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 
+		oldi-transmitters {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			oldi0: oldi@0 {
+				reg = <0>;
+				clocks = <&k3_clks 186 0>;
+				clock-names = "serial";
+				ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					oldi0_port0: port@0 {
+						reg = <0>;
+					};
+
+					oldi0_port1: port@1 {
+						reg = <1>;
+					};
+				};
+			};
+
+			oldi1: oldi@1 {
+				reg = <1>;
+				clocks = <&k3_clks 186 0>;
+				clock-names = "serial";
+				ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					oldi1_port0: port@0 {
+						reg = <0>;
+					};
+
+					oldi1_port1: port@1 {
+						reg = <1>;
+					};
+				};
+			};
+		};
+
 		dss_ports: ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -810,6 +872,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	ecap0: pwm@23100000 {
@@ -1033,6 +1096,9 @@
 		cdns_csi2rx0: csi-bridge@30101000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x30101000 0x00 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
 				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1080,6 +1146,96 @@
 		status = "disabled";
 	};
 
+	pruss: pruss@30040000 {
+		compatible = "ti,am625-pruss";
+		reg = <0x00 0x30040000 0x00 0x80000>;
+		power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x30040000 0x80000>;
+
+		pruss_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1", "shrdram2";
+		};
+
+		pruss_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pruss_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 81 0>,  /* pruss_core_clk */
+						 <&k3_clks 81 14>; /* pruss_iclk */
+					assigned-clocks = <&pruss_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 81 14>;
+				};
+
+				pruss_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 81 3>,	/* pruss_iep_clk */
+						 <&pruss_coreclk_mux>;	/* pruss_coreclk_mux */
+					assigned-clocks = <&pruss_iepclk_mux>;
+					assigned-clock-parents = <&pruss_coreclk_mux>;
+				};
+			};
+		};
+
+		pruss_intc: interrupt-controller@20000 {
+			compatible = "ti,pruss-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru0: pru@34000 {
+			compatible = "ti,am625-pru";
+			reg = <0x34000 0x3000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am62x-pru0-fw";
+			interrupt-parent = <&pruss_intc>;
+			interrupts = <16 2 2>;
+			interrupt-names = "vring";
+		};
+
+		pru1: pru@38000 {
+			compatible = "ti,am625-pru";
+			reg = <0x38000 0x3000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am62x-pru1-fw";
+			interrupt-parent = <&pruss_intc>;
+			interrupts = <18 3 3>;
+			interrupt-names = "vring";
+		};
+	};
+
 	gpmc0: memory-controller@3b000000 {
 		compatible = "ti,am64-gpmc";
 		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 5952874fe429..878d267bc663 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -29,6 +29,7 @@
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		bootph-all;
 	};
 
 	reserved_memory: reserved-memory {
@@ -36,24 +37,30 @@
 		#size-cells = <2>;
 		ranges;
 
-		ramoops@9ca00000 {
+		ramoops@9c700000 {
 			compatible = "ramoops";
-			reg = <0x00 0x9ca00000 0x00 0x00100000>;
+			reg = <0x00 0x9c700000 0x00 0x00100000>;
 			record-size = <0x8000>;
 			console-size = <0x8000>;
 			ftrace-size = <0x00>;
 			pmsg-size = <0x8000>;
 		};
 
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
+		rtos_ipc_memory_region: memory@9c800000 {
 			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cb00000 0x00 0x100000>;
+			reg = <0x00 0x9c800000 0x00 0x00300000>;
 			no-map;
 		};
 
-		mcu_m4fss_memory_region: m4f-memory@9cc00000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
 			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cc00000 0x00 0xe00000>;
+			reg = <0x00 0x9da00000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
 			no-map;
 		};
 
@@ -68,12 +75,6 @@
 			alignment = <0x1000>;
 			no-map;
 		};
-
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9db00000 0x00 0x00c00000>;
-			no-map;
-		};
 	};
 
 	vcc_5v0_som: regulator-vcc-5v0-som {
@@ -95,6 +96,16 @@
 		regulator-boot-on;
 	};
 
+	vddshv_3v3: regulator-vddshv-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDSHV0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -121,6 +132,7 @@
 			AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
 			AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
 		>;
+		bootph-all;
 	};
 
 	main_mdio1_pins_default: main-mdio1-default-pins {
@@ -128,6 +140,7 @@
 			AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
 			AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	main_mmc0_pins_default: main-mmc0-default-pins {
@@ -143,6 +156,7 @@
 			AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
 			AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
 		>;
+		bootph-all;
 	};
 
 	main_rgmii1_pins_default: main-rgmii1-default-pins {
@@ -160,6 +174,7 @@
 			AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
 			AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
@@ -176,6 +191,7 @@
 			AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
 			AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
 		>;
+		bootph-all;
 	};
 
 	pmic_irq_pins_default: pmic-irq-default-pins {
@@ -195,11 +211,13 @@
 &cpsw3g {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>;
+	status = "okay";
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy1>;
+	bootph-all;
 };
 
 &cpsw3g_mdio {
@@ -210,22 +228,21 @@
 	cpsw3g_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 	};
 };
 
-&mailbox0_cluster0 {
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
+&main_pktdma {
+	bootph-all;
 };
 
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
+	bootph-all;
 	status = "okay";
 
 	pmic@30 {
@@ -313,6 +330,7 @@
 		compatible = "atmel,24c32";
 		pagesize = <32>;
 		reg = <0x50>;
+		vcc-supply = <&vddshv_3v3>;
 	};
 
 	i2c_som_rtc: rtc@52 {
@@ -321,13 +339,6 @@
 	};
 };
 
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
@@ -344,13 +355,16 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <0>;
+		bootph-all;
 	};
 };
 
 &sdhci0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	disable-wp;
 	non-removable;
+	bootph-all;
 	status = "okay";
 };
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
new file mode 100644
index 000000000000..7a4cffc27bda
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * https://www.beagleboard.org/boards/pocketbeagle-2
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2025 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "k3-am625.dtsi"
+
+/ {
+	compatible = "beagle,am62-pocketbeagle2", "ti,am625";
+	model = "BeagleBoard.org PocketBeagle2";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &main_uart1;
+		serial2 = &main_uart6;
+		serial3 = &main_uart0;
+		mmc1 = &sdhci1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		i2c0 = &main_i2c0;
+		i2c2 = &main_i2c2;
+		i2c3 = &wkup_i2c0;
+	};
+
+	chosen {
+		stdout-path = &main_uart6;
+	};
+
+	memory@80000000 {
+		/* 512MB RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x20000000>;
+		device_type = "memory";
+		bootph-pre-ram;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global cma region */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00 0x8000000>;
+			linux,cma-default;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9da00000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+
+	vsys_5v0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vdd_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vdd_mmc1: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_3v3_sd_pins_default>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vdd_3v3>;
+		gpio = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vdd_sd_dv: regulator-4 {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_hs200_switch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vdd_3v3>;
+		gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		bootph-all;
+	};
+
+	adc_vref: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_default>;
+		bootph-all;
+
+		led-1 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "heartbeat";
+			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			bootph-all;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "mmc1";
+			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			bootph-all;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			bootph-all;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			bootph-all;
+		};
+	};
+};
+
+&main_pmx0 {
+	led_pins_default: led-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x000c, PIN_OUTPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
+			AM62X_IOPAD(0x0010, PIN_OUTPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
+			AM62X_IOPAD(0x0014, PIN_OUTPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
+			AM62X_IOPAD(0x0018, PIN_OUTPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
+		>;
+		bootph-all;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+			AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+		>;
+		bootph-all;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
+			AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
+		>;
+		bootph-all;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */
+			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */
+			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19/D15) MCASP0_AFSR.UART1_RXD */
+			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20/D16) MCASP0_ACLKR.UART1_TXD */
+		>;
+		bootph-all;
+	};
+
+	main_uart6_pins_default: main-uart6-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
+			AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
+			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
+			AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */
+			AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */
+			AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */
+			AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */
+			AM62X_IOPAD(0x240, PIN_INPUT, 7) /* (D17/C15) MMC1_SDCD.GPIO1_48 */
+		>;
+		bootph-all;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO1_49 */
+		>;
+		bootph-all;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
+		>;
+		bootph-all;
+	};
+
+	vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0000, PIN_OUTPUT, 7) /* (H24) OSPI0_CLK.GPIO0_0 */
+		>;
+		bootph-all;
+	};
+
+	usb1_pins_default: usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
+		>;
+		bootph-all;
+	};
+
+	epwm2_pins_default: epwm2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e8, PIN_OUTPUT, 8) /* (B17) I2C1_SCL.EHRPWM2_A */
+		>;
+	};
+};
+
+&epwm2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&epwm2_pins_default>;
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	bootph-all;
+	status = "okay";
+};
+
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	bootph-pre-ram;
+	status = "reserved";
+};
+
+&main_uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart6_pins_default>;
+	bootph-all;
+	status = "okay";
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	bootph-all;
+	status = "okay";
+
+	ad7291: adc@20 {
+		/* Emulated with MSPM0L1105 */
+		compatible = "adi,ad7291";
+		reg = <0x20>;
+		vref-supply = <&adc_vref>;
+	};
+
+	eeprom: eeprom@50 {
+		/* Emulated with MSPM0L1105 */
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+	bootph-all;
+	status = "okay";
+};
+
+&mcu_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0)	/* (C6/A7) WKUP_UART0_CTSn */
+			AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0)	/* (A4/B4) WKUP_UART0_RTSn */
+			AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0)	/* (B4/B5) WKUP_UART0_RXD */
+			AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0)	/* (C5/C6) WKUP_UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0)	/* (B9) WKUP_I2C0_SCL */
+			AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0)	/* (A9) WKUP_I2C0_SDA */
+		>;
+		bootph-all;
+	};
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	disable-wp;
+	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+	cd-debounce-delay-ms = <100>;
+	bootph-all;
+	ti,fails-without-test-cd;
+	status = "okay";
+};
+
+&usbss0 {
+	bootph-all;
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	/* This is a Type-C socket, but wired as USB 2.0 */
+	dr_mode = "peripheral";
+	bootph-all;
+};
+
+&usbss1 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb1 {
+	/*
+	 * Default set here is compatible with original PocketBeagle,
+	 * Expansion boards assumed this was pre-setup as host.
+	 */
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by Device Manager firmware */
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	bootph-all;
+	status = "reserved";
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <100000>;
+	bootph-all;
+	status = "okay";
+
+	tps65219: pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vsys_5v0>;
+		buck2-supply = <&vsys_5v0>;
+		buck3-supply = <&vsys_5v0>;
+		ldo1-supply = <&vdd_3v3>;
+		ldo2-supply = <&buck2_reg>;
+		ldo3-supply = <&vdd_3v3>;
+		ldo4-supply = <&vdd_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		bootph-all;
+		system-power-controller;
+		ti,power-button;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				/*
+				 * Regulator is left as is unused, vdd_sd
+				 * is controlled via GPIO with bypass config
+				 * as per the NVM configuration
+				 */
+				regulator-name = "VDD_SD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allow-bypass;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "VDDA_0V85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "VDD_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..ea69fab9b52b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62 SoCs
+ *
+ * Copyright (C) 2021-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_m4fss_dma_memory_region: memory@9cb00000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9cb00000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_m4fss_memory_region: memory@9cc00000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9cc00000 0x00 0xe00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mcu_m4fss {
+	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
+	memory-region = <&mcu_m4fss_dma_memory_region>,
+			<&mcu_m4fss_memory_region>;
+	status = "okay";
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
index 9202181fbd65..2b5f5e50b578 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -28,10 +28,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 
@@ -114,7 +114,7 @@
 
 	/* EEPROM */
 	eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		reg = <0x57>;
 		pagesize = <16>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
index 5c1284b802ad..3d1406acf680 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
@@ -74,7 +74,7 @@
 /* Verdin ETH_2_RGMII */
 &cpsw_port2 {
 	phy-handle = <&cpsw3g_phy1>;
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-ivy.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-ivy.dtsi
index 71c29eab0eee..844f59f772e1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-ivy.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-ivy.dtsi
@@ -268,7 +268,7 @@
 /* Verdin ETH_2_RGMII */
 &cpsw_port2 {
 	phy-handle = <&cpsw3g_phy1>;
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
index 7372d392ec8a..9a2483cf5d70 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
@@ -118,7 +118,7 @@
 
 	/* EEPROM */
 	eeprom@57 {
-		compatible = "st,24c02";
+		compatible = "st,24c02", "atmel,24c02";
 		reg = <0x57>;
 		pagesize = <16>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index 1ea8f64b1b3b..2a7242a2fef8 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -189,7 +189,7 @@
 		regulator-name = "USB_1_EN";
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -206,7 +206,13 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9da00000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9db00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9db00000 0x00 0xc00000>;
 			no-map;
@@ -507,16 +513,16 @@
 	/* Verdin I2C_2_DSI */
 	pinctrl_i2c2: main-i2c2-default-pins {
 		pinctrl-single,pins = <
-			AM62X_IOPAD(0x00b0, PIN_INPUT, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */
-			AM62X_IOPAD(0x00b4, PIN_INPUT, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */
+			AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */
+			AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */
 		>;
 	};
 
 	/* Verdin I2C_4_CSI */
 	pinctrl_i2c3: main-i2c3-default-pins {
 		pinctrl-single,pins = <
-			AM62X_IOPAD(0x01d0, PIN_INPUT, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */
-			AM62X_IOPAD(0x01d4, PIN_INPUT, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */
+			AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */
+			AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */
 		>;
 	};
 
@@ -786,8 +792,8 @@
 	/* Verdin I2C_3_HDMI */
 	pinctrl_mcu_i2c0: mcu-i2c0-default-pins {
 		pinctrl-single,pins = <
-			AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /*  (A8) MCU_I2C0_SCL */ /* SODIMM 59 */
-			AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */
+			AM62X_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /*  (A8) MCU_I2C0_SCL */ /* SODIMM 59 */
+			AM62X_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */
 		>;
 	};
 
@@ -839,7 +845,7 @@
 /* Verdin ETH_1 (On-module PHY) */
 &cpsw_port1 {
 	phy-handle = <&cpsw3g_phy0>;
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	status = "disabled";
 };
 
@@ -1316,13 +1322,6 @@
 	status = "disabled";
 };
 
-&mailbox0_cluster0 {
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
 /* Verdin CAN_1 */
 &main_mcan0 {
 	pinctrl-names = "default";
@@ -1506,3 +1505,5 @@
 	pinctrl-0 = <&pinctrl_wkup_uart0>;
 	status = "disabled";
 };
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 9b8a1f85aa15..75aed3a88284 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -106,6 +106,32 @@
 		status = "reserved";
 	};
 
+	wkup_r5fss0: r5fss@78000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x8000>,
+			 <0x78100000 0x00 0x78100000 0x8000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		wkup_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x78000000 0x00008000>,
+			      <0x78100000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am62-wkup-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			status = "disabled";
+		};
+	};
+
 	wkup_vtm0: temperature-sensor@b00000 {
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0xb00000 0x00 0x400>,
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index bfb55ca11323..b08b7062060c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -46,6 +46,28 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	system-idle-states {
+		system_partial_io: system-partial-io {
+			compatible = "system-idle-state";
+			idle-state-name = "off-wake";
+		};
+
+		system_deep_sleep: system-deep-sleep {
+			compatible = "system-idle-state";
+			idle-state-name = "mem";
+		};
+
+		system_mcu_only: system-mcu-only {
+			compatible = "system-idle-state";
+			idle-state-name = "mem-mcu-active";
+		};
+
+		system_standby: system-standby {
+			compatible = "system-idle-state";
+			idle-state-name = "standby";
+		};
+	};
+
 	cbass_main: bus@f0000 {
 		bootph-all;
 		compatible = "simple-bus";
@@ -86,7 +108,9 @@
 			 /* Wakeup Domain Range */
 			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
 			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
-			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+			 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
 
 		cbass_mcu: bus@4000000 {
 			bootph-all;
@@ -103,7 +127,9 @@
 			#size-cells = <2>;
 			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
 				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
-				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+				 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
index 3b4643b7d19c..000305c9e366 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
@@ -15,6 +15,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <12000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
 };
 
 &main_gpio0 {
@@ -39,6 +66,10 @@
 		clocks = <&clk_ov5640_fixed>;
 		clock-names = "xclk";
 
+		AVDD-supply = <&reg_2p8v>;
+		DOVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_1p5v>;
+
 		port {
 			csi2_cam0: endpoint {
 				remote-endpoint = <&csi2rx0_in_sensor>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
index 81a2763d43c6..8a7a9ece08af 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
@@ -15,6 +15,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
 };
 
 &main_gpio0 {
@@ -39,6 +66,10 @@
 		clocks = <&clk_ov5640_fixed>;
 		clock-names = "xclk";
 
+		AVDD-supply = <&reg_2p8v>;
+		DOVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_3p3v>;
+
 		port {
 			csi2_cam0: endpoint {
 				remote-endpoint = <&csi2rx0_in_sensor>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index ee96f4f6deb0..c468b9c5fc09 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -65,6 +65,14 @@
 			pmsg-size = <0x8000>;
 		};
 
+		/* global cma region */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00 0x8000000>;
+			linux,cma-default;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			no-map;
@@ -75,7 +83,7 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9db00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9db00000 0x00 0xc00000>;
 			no-map;
@@ -582,10 +590,11 @@
 		    <&gbe_pmx_obsclk>;
 	assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
 	assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
+	status = "okay";
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy0>;
 };
 
@@ -610,7 +619,7 @@
 		reg = <1>;
 		reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <25>;
-		reset-deassert-us = <60000>; /* T2 */
+		reset-deassert-us = <35>;
 	};
 };
 
@@ -824,9 +833,9 @@
 
 &sdhci0 {
 	bootph-all;
+	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_pins_default>;
-	disable-wp;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
new file mode 100644
index 000000000000..9c8362682645
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Common dtsi for AM625 SK and derivatives
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am62x-sk-common.dtsi"
+
+/ {
+	opp-table {
+		/* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of LM34936 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_3v3_sys: regulator-2 {
+		/* output of LM61460-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc_3v3_sys>;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vdd_sd_dv: regulator-4 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vcc_5v0>;
+		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		bootph-all;
+	};
+
+	vcc_1v8: regulator-5 {
+		/* output of TPS6282518DMQ */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
+	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
+			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
+			AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
+			AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
+			AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
+			AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
+			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
+			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
+			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
+			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
+			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
+			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
+			AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
+			AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
+			AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
+			AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
+			AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
+			AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
+			AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
+			AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
+			AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+			AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
+		>;
+		bootph-all;
+	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
+		>;
+		bootph-all;
+	};
+};
+
+&main_gpio0 {
+	bootph-all;
+};
+
+&main_gpio1 {
+	bootph-all;
+};
+
+&main_i2c1 {
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				   "PRU_DETECT", "MMC1_SD_EN",
+				   "VPP_LDO_EN", "EXP_PS_3V3_En",
+				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+				   "UART1_FET_BUF_EN", "WL_LT_EN",
+				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
+				   "CSI_GPIO2", "PRU_3V3_EN",
+				   "HDMI_INTn", "PD_I2C_IRQ",
+				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+				   "MCASP1_FET_SEL", "UART1_FET_SEL",
+				   "TSINT#", "IO_EXP_TEST_LED";
+		bootph-all;
+	};
+};
+
+&sdhci0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	disable-wp;
+};
+
+&sdhci1 {
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
+	status = "okay";
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	cpsw3g_phy1: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&fss {
+	bootph-all;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bootph-all;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				bootph-pre-ram;
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index ae81ebb39d02..52954c77df80 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -7,293 +7,17 @@
 
 /dts-v1/;
 
-#include "k3-am62x-sk-common.dtsi"
+#include "k3-am625.dtsi"
+#include "k3-am625-sk-common.dtsi"
 
 / {
 	compatible = "ti,am625-sk", "ti,am625";
 	model = "Texas Instruments AM625 SK";
 
-	opp-table {
-		/* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-supported-hw = <0x01 0x0004>;
-			clock-latency-ns = <6000000>;
-		};
-	};
-
 	memory@80000000 {
-		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
-
-	};
-
-	vmain_pd: regulator-0 {
-		/* TPS65988 PD CONTROLLER OUTPUT */
-		bootph-all;
-		compatible = "regulator-fixed";
-		regulator-name = "vmain_pd";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_5v0: regulator-1 {
-		/* Output of LM34936 */
-		bootph-all;
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vmain_pd>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_3v3_sys: regulator-2 {
-		/* output of LM61460-Q1 */
-		bootph-all;
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_3v3_sys";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vmain_pd>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_mmc1: regulator-3 {
-		/* TPS22918DBVR */
-		bootph-all;
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_mmc1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		enable-active-high;
-		vin-supply = <&vcc_3v3_sys>;
-		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	vdd_sd_dv: regulator-4 {
-		/* Output of TLV71033 */
-		bootph-all;
-		compatible = "regulator-gpio";
-		regulator-name = "tlv71033";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vdd_sd_dv_pins_default>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		vin-supply = <&vcc_5v0>;
-		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0>,
-			 <3300000 0x1>;
-	};
-
-	vcc_1v8: regulator-5 {
-		/* output of TPS6282518DMQ */
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3_sys>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&main_pmx0 {
-	main_rgmii2_pins_default: main-rgmii2-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
-			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
-			AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
-			AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
-			AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
-			AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
-			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
-			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
-			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
-			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
-			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
-			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
-		>;
-	};
-
-	ospi0_pins_default: ospi0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
-			AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
-			AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
-			AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
-			AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
-			AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
-			AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
-			AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
-			AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
-			AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
-			AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
-		>;
-	};
-
-	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
-		>;
-	};
-
-	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
-		>;
-	};
-};
-
-&main_gpio0 {
-	bootph-all;
-};
-
-&main_gpio1 {
-	bootph-all;
-};
-
-&main_i2c1 {
-	bootph-all;
-	exp1: gpio@22 {
-		bootph-all;
-		compatible = "ti,tca6424";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
-				   "PRU_DETECT", "MMC1_SD_EN",
-				   "VPP_LDO_EN", "EXP_PS_3V3_En",
-				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
-				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
-				   "UART1_FET_BUF_EN", "WL_LT_EN",
-				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
-				   "CSI_GPIO2", "PRU_3V3_EN",
-				   "HDMI_INTn", "PD_I2C_IRQ",
-				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
-				   "MCASP1_FET_SEL", "UART1_FET_SEL",
-				   "TSINT#", "IO_EXP_TEST_LED";
-
-		interrupt-parent = <&main_gpio1>;
-		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
-	};
-};
-
-&sdhci1 {
-	vmmc-supply = <&vdd_mmc1>;
-	vqmmc-supply = <&vdd_sd_dv>;
-};
-
-&cpsw3g {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-rxid";
-	phy-handle = <&cpsw3g_phy1>;
-};
-
-&cpsw3g_mdio {
-	cpsw3g_phy1: ethernet-phy@1 {
-		reg = <1>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,min-output-impedance;
-	};
-};
-
-&mailbox0_cluster0 {
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&fss {
-	bootph-all;
-};
-
-&ospi0 {
-	bootph-all;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ospi0_pins_default>;
-
-	flash@0 {
-		bootph-all;
-		compatible = "jedec,spi-nor";
-		reg = <0x0>;
-		spi-tx-bus-width = <8>;
-		spi-rx-bus-width = <8>;
-		spi-max-frequency = <25000000>;
-		cdns,tshsl-ns = <60>;
-		cdns,tsd2d-ns = <60>;
-		cdns,tchsh-ns = <60>;
-		cdns,tslch-ns = <60>;
-		cdns,read-delay = <4>;
-
-		partitions {
-			bootph-all;
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "ospi.tiboot3";
-				reg = <0x0 0x80000>;
-			};
-
-			partition@80000 {
-				label = "ospi.tispl";
-				reg = <0x80000 0x200000>;
-			};
-
-			partition@280000 {
-				label = "ospi.u-boot";
-				reg = <0x280000 0x400000>;
-			};
-
-			partition@680000 {
-				label = "ospi.env";
-				reg = <0x680000 0x40000>;
-			};
-
-			partition@6c0000 {
-				label = "ospi.env.backup";
-				reg = <0x6c0000 0x40000>;
-			};
-
-			partition@800000 {
-				label = "ospi.rootfs";
-				reg = <0x800000 0x37c0000>;
-			};
-
-			partition@3fc0000 {
-				bootph-pre-ram;
-				label = "ospi.phypattern";
-				reg = <0x3fc0000 0x40000>;
-			};
-		};
+		device_type = "memory";
+		bootph-pre-ram;
 	};
 };
-
-&tlv320aic3106 {
-	DVDD-supply = <&vcc_1v8>;
-};
diff --git a/arch/arm64/boot/dts/ti/k3-am6254atl-sk.dts b/arch/arm64/boot/dts/ti/k3-am6254atl-sk.dts
new file mode 100644
index 000000000000..055e63a3fbb1
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6254atl-sk.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * AM6254atl SiP SK: https://www.ti.com/lit/df/sprr482b/sprr482b.zip
+ * Webpage: https://www.ti.com/tool/SK-AM62-SIP
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am6254atl.dtsi"
+#include "k3-am625-sk-common.dtsi"
+
+/ {
+	model = "Texas Instruments AM6254atl SK";
+	compatible = "ti,am6254atl-sk", "ti,am6254atl", "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6254atl.dtsi b/arch/arm64/boot/dts/ti/k3-am6254atl.dtsi
new file mode 100644
index 000000000000..976ad7dc1e71
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6254atl.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DTS for AM625 SiP SoC family in Quad core configuration and 512MiB RAM.
+ *
+ * Webpage: https://www.ti.com/product/AM625SIP
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am625.dtsi"
+
+/ {
+	model = "Texas Instruments AM6254atl SiP";
+	compatible = "ti,am6254atl", "ti,am625";
+
+	memory@80000000 {
+		/* 512MiB of integrated RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x20000000>;
+		device_type = "memory";
+		bootph-all;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index a93e2cd7b8c7..9e5b75a4e88e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -18,7 +18,6 @@
 		compatible = "arm,gic-v3";
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
 		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
-		      <0x00 0x01880000 0x00 0xc0000>,   /* GICR */
 		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
 		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
 		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
@@ -52,6 +51,7 @@
 			compatible = "ti,am654-phy-gmii-sel";
 			reg = <0x4044 0x8>;
 			#phy-cells = <1>;
+			bootph-all;
 		};
 
 		epwm_tbclk: clock-controller@4130 {
@@ -97,6 +97,7 @@
 			#mbox-cells = <1>;
 			interrupt-names = "rx_012";
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			bootph-all;
 		};
 
 		inta_main_dmss: interrupt-controller@48000000 {
@@ -132,6 +133,7 @@
 			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
 			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
 			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+			bootph-all;
 		};
 
 		main_pktdma: dma-controller@485c0000 {
@@ -148,6 +150,8 @@
 				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
+			bootph-all;
+
 			ti,sci = <&dmsc>;
 			ti,sci-dev-id = <30>;
 			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
@@ -221,16 +225,19 @@
 		k3_pds: power-controller {
 			compatible = "ti,sci-pm-domain";
 			#power-domain-cells = <2>;
+			bootph-all;
 		};
 
 		k3_clks: clock-controller {
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
+			bootph-all;
 		};
 
 		k3_reset: reset-controller {
 			compatible = "ti,sci-reset";
 			#reset-cells = <2>;
+			bootph-all;
 		};
 	};
 
@@ -240,6 +247,16 @@
 		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
 		       <&main_pktdma 0x7507 0>;
 		dma-names = "tx", "rx1", "rx2";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+
+		rng: rng@40910000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x40910000 0x00 0x7d>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			status = "reserved"; /* Reserved for OP-TEE */
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -255,11 +272,12 @@
 		 * firmware on non-MPU processors
 		 */
 		status = "disabled";
+		bootph-all;
 	};
 
 	main_pmx0: pinctrl@f4000 {
 		compatible = "pinctrl-single";
-		reg = <0x00 0xf4000 0x00 0x2ac>;
+		reg = <0x00 0xf4000 0x00 0x25c>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
@@ -283,6 +301,7 @@
 		assigned-clock-parents = <&k3_clks 36 3>;
 		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
 		ti,timer-pwm;
+		bootph-all;
 	};
 
 	main_timer1: timer@2410000 {
@@ -576,8 +595,6 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 6>;
-		assigned-clock-parents = <&k3_clks 57 8>;
 		bus-width = <8>;
 		mmc-hs200-1_8v;
 		ti,clkbuf-sel = <0x7>;
@@ -654,6 +671,7 @@
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			bootph-all;
 			snps,usb2-gadget-lpm-disable;
 			snps,usb2-lpm-disable;
 		};
@@ -748,6 +766,7 @@
 				phys = <&phy_gmii_sel 1>;
 				mac-address = [00 00 00 00 00 00];
 				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
+				bootph-all;
 			};
 
 			cpsw_port2: port@2 {
@@ -767,6 +786,7 @@
 			clocks = <&k3_clks 13 0>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			bootph-all;
 		};
 
 		cpts@3d000 {
@@ -794,6 +814,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	mailbox0_cluster1: mailbox@29010000 {
@@ -803,6 +824,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	mailbox0_cluster2: mailbox@29020000 {
@@ -812,6 +834,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	mailbox0_cluster3: mailbox@29030000 {
@@ -821,6 +844,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	main_mcan0: can@20701000 {
@@ -1044,6 +1068,9 @@
 		cdns_csi2rx0: csi-bridge@30101000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x30101000 0x00 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
 				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1124,6 +1151,18 @@
 		power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
 	};
 
+	c7x_0: dsp@7e000000 {
+		compatible = "ti,am62a-c7xv-dsp";
+		reg = <0x00 0x7e000000 0x00 0x00100000>;
+		reg-names = "l2sram";
+		resets = <&k3_reset 208 1>;
+		firmware-name = "am62a-c71_0-fw";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <208>;
+		ti,sci-proc-ids = <0x04 0xff>;
+		status = "disabled";
+	};
+
 	e5010: jpeg-encoder@fd20000 {
 		compatible = "ti,am62a-jpeg-enc", "img,e5010-jpeg-enc";
 		reg = <0x00 0xfd20000 0x00 0x100>,
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
index 0469c766b769..d22caa7c346b 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
@@ -12,7 +12,6 @@
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
-		status = "disabled";
 	};
 
 	mcu_esm: esm@4100000 {
@@ -175,4 +174,30 @@
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
 		status = "disabled";
 	};
+
+	mcu_r5fss0: r5fss@79000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x79000000 0x00 0x79000000 0x8000>,
+			 <0x79020000 0x00 0x79020000 0x8000>;
+		power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		mcu_r5fss0_core0: r5f@79000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x79000000 0x00008000>,
+			      <0x79020000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			resets = <&k3_reset 9 1>;
+			firmware-name = "am62a-mcu-r5f0_0-fw";
+			ti,atcm-enable = <0>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <0>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <9>;
+			ti,sci-proc-ids = <0x03 0xff>;
+			status = "disabled";
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index a5aceaa39670..b24a63feeab8 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -42,9 +42,10 @@
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		bootph-all;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -58,6 +59,18 @@
 			linux,cma-default;
 		};
 
+		wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0xf00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -69,12 +82,6 @@
 			alignment = <0x1000>;
 			no-map;
 		};
-
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9c900000 0x00 0x01e00000>;
-			no-map;
-		};
 	};
 
 	vcc_5v0_som: regulator-vcc-5v0-som {
@@ -99,6 +106,7 @@
 			AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */
 			AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */
 		>;
+		bootph-all;
 	};
 
 	main_mdio1_pins_default: main-mdio1-default-pins {
@@ -106,6 +114,7 @@
 			AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
 			AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	main_mmc0_pins_default: main-mmc0-default-pins {
@@ -121,6 +130,7 @@
 			AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */
 			AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */
 		>;
+		bootph-all;
 	};
 
 	main_rgmii1_pins_default: main-rgmii1-default-pins {
@@ -138,6 +148,7 @@
 			AM62AX_IOPAD(0x130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */
 			AM62AX_IOPAD(0x12c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
@@ -155,6 +166,7 @@
 			AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
 			AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */
 		>;
+		bootph-all;
 	};
 
 	pmic_irq_pins_default: pmic-irq-default-pins {
@@ -164,15 +176,25 @@
 	};
 };
 
+&a53_opp_table {
+	/* Requires VDD_CORE at 0v85 */
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+		clock-latency-ns = <6000000>;
+	};
+};
+
 &cpsw3g {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>;
+	status = "okay";
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy1>;
+	bootph-all;
 };
 
 &cpsw3g_mdio {
@@ -182,6 +204,7 @@
 	cpsw3g_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		bootph-all;
 		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
@@ -196,6 +219,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
+	bootph-all;
 	status = "okay";
 
 	pmic@30 {
@@ -215,8 +239,8 @@
 		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		ti,power-button;
 		system-power-controller;
+		ti,power-button;
 
 		regulators {
 			vdd_3v3: buck1 {
@@ -302,6 +326,10 @@
 	status = "okay";
 };
 
+&main_pktdma {
+	bootph-all;
+};
+
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
@@ -318,13 +346,16 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <0>;
+		bootph-all;
 	};
 };
 
 &sdhci0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	disable-wp;
 	non-removable;
+	bootph-all;
 	status = "okay";
 };
+
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
index c7486fb2a5b4..3aa127157d24 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
@@ -12,12 +12,29 @@ thermal_zones: thermal-zones {
 		thermal-sensors = <&wkup_vtm0 0>;
 
 		trips {
+			main0_alert: main0-alert {
+				temperature = <115000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
 			main0_crit: main0-crit {
 				temperature = <125000>;	/* milliCelsius */
 				hysteresis = <2000>;	/* milliCelsius */
 				type = "critical";
 			};
 		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main0_alert>;
+				cooling-device =
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
 	};
 
 	main1_thermal: main1-thermal {
@@ -26,25 +43,59 @@ thermal_zones: thermal-zones {
 		thermal-sensors = <&wkup_vtm0 1>;
 
 		trips {
+			main1_alert: main1-alert {
+				temperature = <115000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
 			main1_crit: main1-crit {
 				temperature = <125000>;	/* milliCelsius */
 				hysteresis = <2000>;	/* milliCelsius */
 				type = "critical";
 			};
 		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main1_alert>;
+				cooling-device =
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
 	};
 
 	main2_thermal: main2-thermal {
-	       polling-delay-passive = <250>;	/* milliSeconds */
-	       polling-delay = <500>;		/* milliSeconds */
-	       thermal-sensors = <&wkup_vtm0 2>;
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 2>;
 
 		trips {
+			main2_alert: main2-alert {
+				temperature = <115000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
 			main2_crit: main2-crit {
 				temperature = <125000>;	/* milliCelsius */
 				hysteresis = <2000>;	/* milliCelsius */
 				type = "critical";
 			};
 		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main2_alert>;
+				cooling-device =
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..950f4f37d477
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62A SoCs
+ *
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	c7x_0_dma_memory_region: memory@99800000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x99800000 0x00 0x100000>;
+		no-map;
+	};
+
+	c7x_0_memory_region: memory@99900000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x99900000 0x00 0xf00000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core0_dma_memory_region: memory@9b800000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9b800000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core0_memory_region: memory@9b900000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9b900000 0x00 0xf00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&c7x_0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+	status = "okay";
+};
+
+/* main_rti4 is used by C7x DSP */
+&main_rti4 {
+	status = "reserved";
+};
+
+/* main_timer2 is used by C7x DSP */
+&main_timer2 {
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index 0b1dd5390cd3..23877dadc98d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -2,9 +2,11 @@
 /*
  * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals
  *
- * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
+
 &cbass_wakeup {
 	wkup_conf: bus@43000000 {
 		compatible = "simple-bus";
@@ -15,6 +17,7 @@
 		chipid: chipid@14 {
 			compatible = "ti,am654-chipid";
 			reg = <0x14 0x4>;
+			bootph-all;
 		};
 
 		opp_efuse_table: syscon@18 {
@@ -38,14 +41,35 @@
 		};
 	};
 
-	wkup_uart0: serial@2b300000 {
-		compatible = "ti,am64-uart", "ti,am654-uart";
-		reg = <0x00 0x2b300000 0x00 0x100>;
-		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+	target-module@2b300050 {
+		compatible = "ti,sysc-omap2", "ti,sysc";
+		reg = <0 0x2b300050 0 0x4>,
+		      <0 0x2b300054 0 0x4>,
+		      <0 0x2b300058 0 0x4>;
+		reg-names = "rev", "sysc", "syss";
+		ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+				 SYSC_OMAP2_SOFTRESET |
+				 SYSC_OMAP2_AUTOIDLE)>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>,
+				<SYSC_IDLE_SMART_WKUP>;
+		ti,syss-mask = <1>;
+		ti,no-reset-on-init;
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 114 0>;
-		clock-names = "fclk";
-		status = "disabled";
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x2b300000 0x100000>;
+
+		wkup_uart0: serial@0 {
+			compatible = "ti,am64-uart", "ti,am654-uart";
+			reg = <0 0x100>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			bootph-pre-ram;
+	       };
 	};
 
 	wkup_i2c0: i2c@2b200000 {
@@ -81,6 +105,32 @@
 		status = "reserved";
 	};
 
+	wkup_r5fss0: r5fss@78000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x8000>,
+			 <0x78100000 0x00 0x78100000 0x8000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		wkup_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x78000000 0x00008000>,
+			      <0x78100000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am62a-wkup-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			status = "disabled";
+		};
+	};
+
 	wkup_vtm0: temperature-sensor@b00000 {
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0xb00000 0x00 0x400>,
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
index 4d79b3e9486a..31b2de035f0f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -46,6 +46,33 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	system-idle-states {
+		system_partial_io: system-partial-io {
+			compatible = "system-idle-state";
+			idle-state-name = "off-wake";
+		};
+
+		system_io_ddr: system-io-ddr {
+			compatible = "system-idle-state";
+			idle-state-name = "mem-deep";
+		};
+
+		system_deep_sleep: system-deep-sleep {
+			compatible = "system-idle-state";
+			idle-state-name = "mem";
+		};
+
+		system_mcu_only: system-mcu-only {
+			compatible = "system-idle-state";
+			idle-state-name = "mem-mcu-active";
+		};
+
+		system_standby: system-standby {
+			compatible = "system-idle-state";
+			idle-state-name = "standby";
+		};
+	};
+
 	cbass_main: bus@f0000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index a6f0d87a50d8..e99bdbc2e0cb 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -18,10 +18,13 @@
 
 	aliases {
 		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
 		serial2 = &main_uart0;
 		serial3 = &main_uart1;
 		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
+		rtc0 = &wkup_rtc0;
+		rtc1 = &tps659312;
 	};
 
 	chosen {
@@ -33,9 +36,10 @@
 		/* 4G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
 		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+		bootph-all;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -49,6 +53,18 @@
 			linux,cma-default;
 		};
 
+		wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0xf00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -60,12 +76,6 @@
 			alignment = <0x1000>;
 			no-map;
 		};
-
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9c900000 0x00 0x01e00000>;
-			no-map;
-		};
 	};
 
 	opp-table {
@@ -118,6 +128,7 @@
 		regulator-boot-on;
 		enable-active-high;
 		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		bootph-all;
 	};
 
 	vcc_3v3_sys: regulator-4 {
@@ -222,6 +233,10 @@
 &wkup_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_uart0_pins_default>;
+	wakeup-source = <&system_io_ddr>,
+			<&system_deep_sleep>,
+			<&system_mcu_only>,
+			<&system_standby>;
 	status = "reserved";
 };
 
@@ -264,12 +279,13 @@
 			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
 			AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
 		>;
+		bootph-all;
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
 		pinctrl-single,pins = <
-			AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */
-			AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */
+			AM62AX_IOPAD(0x01ac, PIN_INPUT, 2) /* (B21) MCASP0_AFSR.UART1_RXD */
+			AM62AX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (A21) MCASP0_ACLKR.UART1_TXD */
 			AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */
 			AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */
 		>;
@@ -287,6 +303,7 @@
 			AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
 			AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
 		>;
+		bootph-all;
 	};
 
 	main_i2c2_pins_default: main-i2c2-default-pins {
@@ -310,6 +327,7 @@
 			AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
 			AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
 		>;
+		bootph-all;
 	};
 
 	main_mmc1_pins_default: main-mmc1-default-pins {
@@ -322,6 +340,7 @@
 			AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
 			AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
 		>;
+		bootph-all;
 	};
 
 	usr_led_pins_default: usr-led-default-pins {
@@ -341,6 +360,7 @@
 			AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
 			AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	main_rgmii1_pins_default: main-rgmii1-default-pins {
@@ -358,6 +378,7 @@
 			AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */
 			AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	main_mcasp1_pins_default: main-mcasp1-default-pins {
@@ -380,6 +401,25 @@
 			AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
 		>;
 	};
+
+	main_ecap0_pins_default: main-ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01b8, PIN_OUTPUT, 3) /* (C16) SPI0_CS1.ECAP0_IN_APWM_OUT */
+		>;
+	};
+
+	main_ecap2_pins_default: main-ecap2-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01a4, PIN_OUTPUT, 2) /* (A19) MCASP0_ACLKX.ECAP2_IN_APWM_OUT */
+		>;
+	};
+
+	main_epwm1_pins_default: main-epwm1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x019c, PIN_OUTPUT, 6) /* (B18) MCASP0_AXR1.EHRPWM1_A */
+			AM62AX_IOPAD(0x01a0, PIN_OUTPUT, 6) /* (B20) MCASP0_AXR0.EHRPWM1_B */
+		>;
+	};
 };
 
 &mcu_pmx0 {
@@ -390,6 +430,42 @@
 			AM62AX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */
 		>;
 	};
+
+	mcu_mcan0_tx_pins_default: mcu-mcan0-tx-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan0_rx_pins_default: mcu-mcan0-rx-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */
+		>;
+	};
+
+	mcu_mcan0_rx_pins_wakeup: mcu-mcan0-rx-wakeup-pins {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x038, PIN_INPUT | PIN_WKUP_EN, 0) /* (B3) MCU_MCAN0_RX */
+		>;
+	};
+
+	mcu_mcan1_tx_pins_default: mcu-mcan1-tx-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x03c, PIN_OUTPUT, 0) /* (E5) MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_mcan1_rx_pins_default: mcu-mcan1-rx-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (D4) MCU_MCAN1_RX */
+		>;
+	};
+
+	mcu_mcan1_rx_pins_wakeup: mcu-mcan1-rx-wakeup-pins {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x040, PIN_INPUT | PIN_WKUP_EN, 0) /* (D4) MCU_MCAN1_RX */
+		>;
+	};
 };
 
 &mcu_gpio0 {
@@ -519,6 +595,7 @@
 		#interrupt-cells = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+		bootph-all;
 
 		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
 				   "BT_EN_SOC", "MMC1_SD_EN",
@@ -611,7 +688,7 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	disable-wp;
+	bootph-all;
 };
 
 &sdhci1 {
@@ -622,10 +699,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	disable-wp;
+	bootph-all;
 };
 
 &main_gpio0 {
 	status = "okay";
+	bootph-all;
 };
 
 &main_gpio1 {
@@ -640,6 +719,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
+	bootph-all;
 };
 
 /* Main UART1 is used for TIFS firmware logs */
@@ -655,6 +735,7 @@
 };
 
 &usb0 {
+	bootph-all;
 	usb-role-switch;
 
 	port {
@@ -664,6 +745,10 @@
 	};
 };
 
+&usb0_phy_ctrl {
+	bootph-all;
+};
+
 &usbss1 {
 	status = "okay";
 };
@@ -680,10 +765,15 @@
 	pinctrl-0 = <&main_rgmii1_pins_default>;
 };
 
+&phy_gmii_sel {
+	bootph-all;
+};
+
 &cpsw_port1 {
 	status = "okay";
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy0>;
+	bootph-all;
 };
 
 &cpsw_port2 {
@@ -700,6 +790,7 @@
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
+		bootph-all;
 	};
 };
 
@@ -737,3 +828,97 @@
 		};
 	};
 };
+
+&ecap0 {
+	/* P26 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap0_pins_default>;
+	status = "okay";
+};
+
+&ecap2 {
+	/* P11 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap2_pins_default>;
+	status = "okay";
+};
+
+&epwm1 {
+	/* P36/P33 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_epwm1_pins_default>;
+	status = "okay";
+};
+
+&fss {
+	status = "okay";
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+		bootph-all;
+	};
+};
+
+&main_pmx0 {
+	ospi0_pins_default: ospi0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
+			AM62AX_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
+			AM62AX_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
+			AM62AX_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
+			AM62AX_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
+			AM62AX_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
+			AM62AX_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
+			AM62AX_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
+			AM62AX_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
+			AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+			AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
+		>;
+	};
+};
+
+&mcu_mcan0 {
+	pinctrl-names = "default", "wakeup";
+	pinctrl-0 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_default>;
+	pinctrl-1 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_wakeup>;
+	wakeup-source = <&system_partial_io>,
+			<&system_io_ddr>,
+			<&system_deep_sleep>,
+			<&system_mcu_only>,
+			<&system_standby>;
+};
+
+&mcu_mcan1 {
+	pinctrl-names = "default", "wakeup";
+	pinctrl-0 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_default>;
+	pinctrl-1 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_wakeup>;
+	wakeup-source = <&system_partial_io>,
+			<&system_io_ddr>,
+			<&system_deep_sleep>,
+			<&system_mcu_only>,
+			<&system_standby>;
+};
+
+&mcu_uart0 {
+	wakeup-source = <&system_io_ddr>,
+			<&system_deep_sleep>,
+			<&system_mcu_only>,
+			<&system_standby>;
+};
+
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
index 6c99221beb6b..b6e5eee99370 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
@@ -50,6 +50,7 @@
 			next-level-cache = <&L2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 135 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -66,6 +67,7 @@
 			next-level-cache = <&L2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 136 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -82,6 +84,7 @@
 			next-level-cache = <&L2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 137 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -98,6 +101,7 @@
 			next-level-cache = <&L2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 138 0>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
new file mode 100644
index 000000000000..2b233bc0323d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
@@ -0,0 +1,740 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * AM62D2 EVM: https://www.ti.com/lit/zip/sprcal5
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am62d2.dtsi"
+
+/ {
+	compatible = "ti,am62d2-evm", "ti,am62d2";
+	model = "Texas Instruments AM62D2 EVM";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &wkup_rtc0;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		spi0 = &ospi0;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+		bootph-all;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global cma region */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00 0x2000000>;
+			alloc-ranges = <0x00 0xc0000000 0x00 0x2000000>;
+			linux,cma-default;
+		};
+
+		secure_tfa_ddr: tfa@80000000 {
+			reg = <0x00 0x80000000 0x00 0x80000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0xf00000>;
+			no-map;
+			bootph-pre-ram;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			no-map;
+		};
+
+		rtos_ipc_memory_region: memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x01000000>;
+			no-map;
+		};
+	};
+
+	opp-table {
+		/* Requires VDD_CORE at 0v85 */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	vout_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vout_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vmain_pd: regulator-1 {
+		/* Output of TPS22811 */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vout_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_5v0: regulator-2 {
+		/* Output of TPS630702RNMR */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_3v3_main: regulator-3 {
+		/* output of LM5141-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_main";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vdd_mmc1: regulator-4 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vcc_3v3_sys: regulator-5 {
+		/* output of TPS222965DSGT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_main>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vddshv_sdio: regulator-6 {
+		/* output of TLV7103318QDSERQ1 */
+		compatible = "regulator-gpio";
+		regulator-name = "vddshv_sdio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vddshv_sdio_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v0>;
+		regulator-boot-on;
+		gpios = <&main_gpio0 59 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		bootph-all;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_led_pins_default>;
+
+		led-0 {
+			label = "am62d-evm:green:heartbeat";
+			gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+};
+
+&mcu_pmx0 {
+	status = "okay";
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x01f4, PIN_INPUT, 7) /* (F17) EXTINTn.GPIO1_31 */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */
+			AM62DX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */
+			AM62DX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */
+			AM62DX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
+		>;
+		bootph-all;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_MCU_IOPAD(0x004c, PIN_INPUT, 0) /* (D13) WKUP_I2C0_SCL */
+			AM62DX_MCU_IOPAD(0x0050, PIN_INPUT, 0) /* (E13) WKUP_I2C0_SDA */
+		>;
+		bootph-all;
+	};
+};
+
+/* WKUP UART0 is used for DM firmware logs */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	bootph-all;
+	status = "reserved";
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x01c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
+			AM62DX_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */
+			AM62DX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */
+		>;
+		bootph-all;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C17) I2C1_SCL */
+			AM62DX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (E17) I2C1_SDA */
+		>;
+		bootph-all;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (M22) GPMC0_CSn2.I2C2_SCL */
+			AM62DX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (M20) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */
+			AM62DX_IOPAD(0x0218, PIN_OUTPUT, 0) /* (AB7) MMC0_CLK */
+			AM62DX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */
+			AM62DX_IOPAD(0x0210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */
+			AM62DX_IOPAD(0x020c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */
+			AM62DX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */
+			AM62DX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */
+			AM62DX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */
+			AM62DX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */
+			AM62DX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */
+		>;
+		bootph-all;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x023c, PIN_INPUT, 0) /* (C21) MMC1_CMD */
+			AM62DX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (E22) MMC1_CLK */
+			AM62DX_IOPAD(0x0230, PIN_INPUT, 0) /* (B22) MMC1_DAT0 */
+			AM62DX_IOPAD(0x022c, PIN_INPUT, 0) /* (D21) MMC1_DAT1 */
+			AM62DX_IOPAD(0x0228, PIN_INPUT, 0) /* (C22) MMC1_DAT2 */
+			AM62DX_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
+			AM62DX_IOPAD(0x0240, PIN_INPUT, 0) /* (E18) MMC1_SDCD */
+		>;
+		bootph-all;
+	};
+
+	main_mdio0_pins_default: main-mdio0-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
+			AM62DX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
+		>;
+		bootph-all;
+	};
+
+	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */
+			AM62DX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */
+			AM62DX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */
+			AM62DX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */
+			AM62DX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */
+			AM62DX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */
+			AM62DX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */
+			AM62DX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */
+			AM62DX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */
+			AM62DX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */
+			AM62DX_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */
+			AM62DX_IOPAD(0x012c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */
+		>;
+		bootph-all;
+	};
+
+	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x0184, PIN_INPUT, 0) /* (AA21) RGMII2_RD0 */
+			AM62DX_IOPAD(0x0188, PIN_INPUT, 0) /* (Y20) RGMII2_RD1 */
+			AM62DX_IOPAD(0x018c, PIN_INPUT, 0) /* (AB21) RGMII2_RD2 */
+			AM62DX_IOPAD(0x0190, PIN_INPUT, 0) /* (AB20) RGMII2_RD3 */
+			AM62DX_IOPAD(0x0180, PIN_INPUT, 0) /* (AA20) RGMII2_RXC */
+			AM62DX_IOPAD(0x017c, PIN_INPUT, 0) /* (W18) RGMII2_RX_CTL */
+			AM62DX_IOPAD(0x016c, PIN_INPUT, 0) /* (AA19) RGMII2_TD0 */
+			AM62DX_IOPAD(0x0170, PIN_INPUT, 0) /* (Y18) RGMII2_TD1 */
+			AM62DX_IOPAD(0x0174, PIN_INPUT, 0) /* (AA18) RGMII2_TD2 */
+			AM62DX_IOPAD(0x0178, PIN_INPUT, 0) /* (W17) RGMII2_TD3 */
+			AM62DX_IOPAD(0x0168, PIN_OUTPUT, 0) /* (AB19) RGMII2_TXC */
+			AM62DX_IOPAD(0x0164, PIN_OUTPUT, 0) /* (Y19) RGMII2_TX_CTL */
+		>;
+		bootph-all;
+	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+
+	vddshv_sdio_pins_default: vddshv-sdio-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x00f0, PIN_INPUT, 7) /* (Y21) GPIO0_59 */
+		>;
+		bootph-all;
+	};
+
+	usr_led_pins_default: usr-led-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x0244, PIN_INPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (D19) USB1_DRVVBUS */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (L22) OSPI0_CLK */
+			AM62DX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (H21) OSPI0_CSn0 */
+			AM62DX_IOPAD(0x000c, PIN_INPUT, 0) /* (J21) OSPI0_D0 */
+			AM62DX_IOPAD(0x0010, PIN_INPUT, 0) /* (J18) OSPI0_D1 */
+			AM62DX_IOPAD(0x0014, PIN_INPUT, 0) /* (J19) OSPI0_D2 */
+			AM62DX_IOPAD(0x0018, PIN_INPUT, 0) /* (H18) OSPI0_D3 */
+			AM62DX_IOPAD(0x001c, PIN_INPUT, 0) /* (K21) OSPI0_D4 */
+			AM62DX_IOPAD(0x0020, PIN_INPUT, 0) /* (H19) OSPI0_D5 */
+			AM62DX_IOPAD(0x0024, PIN_INPUT, 0) /* (J20) OSPI0_D6 */
+			AM62DX_IOPAD(0x0028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+			AM62DX_IOPAD(0x0008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */
+		>;
+		bootph-all;
+	};
+};
+
+&mcu_gpio0 {
+	status = "okay";
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	bootph-all;
+	status = "okay";
+
+	typec_pd0: usb-power-controller@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			port {
+				usb_con_hs: endpoint {
+					remote-endpoint = <&usb0_hs_ep>;
+				};
+			};
+		};
+	};
+
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+		bootph-all;
+
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				  "","MMC1_SD_EN",
+				  "VPP_EN", "GPIO_DIX_RST",
+				  "IO_EXP_OPT_EN", "DIX_INT",
+				  "GPIO_eMMC_RSTn", "CPLD2_DONE",
+				  "CPLD2_INTN", "CPLD1_DONE",
+				  "CPLD1_INTN", "USB_TYPEA_OC_INDICATION",
+				  "PCM1_INT", "PCM2_INT",
+				  "GPIO_PCM1_RST", "TEST_GPIO2",
+				  "GPIO_PCM2_RST", "",
+				  "IO_MCAN0_STB", "IO_MCAN1_STB",
+				  "PD_I2C_IRQ", "IO_EXP_TEST_LED";
+	};
+
+	exp2: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PCM6240_BUF_IO_EN", "",
+				  "CPLD1_JTAGENB", "CPLD1_PROGRAMN",
+				  "CPLD2_JTAGENB", "CPLD2_PROGRAMN",
+				  "", "",
+				  "", "CPLD1_TCK",
+				  "CPLD1_TMS", "CPLD1_TDI",
+				  "CPLD1_TDO", "CPLD2_TCK",
+				  "CPLD2_TMS", "CPLD2_TDI",
+				  "CPLD2_TDO", "ADDR1_IO_EXP",
+				  "SoC_I2C0_SCL", "SoC_I2C0_SDA";
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps65224: pmic@48 {
+		compatible = "ti,tps65224-q1";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		ti,primary-pmic;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		buck12-supply = <&vcc_3v3_sys>;
+		buck3-supply = <&vcc_3v3_sys>;
+		buck4-supply = <&vcc_3v3_sys>;
+		ldo1-supply = <&vcc_3v3_sys>;
+		ldo2-supply = <&vcc_3v3_sys>;
+		ldo3-supply = <&vcc_3v3_sys>;
+
+		regulators {
+			buck12: buck12 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			buck3: buck3 {
+				regulator-name = "dvdd1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			buck4: buck4 {
+				regulator-name = "vdds_ddr";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldo1: ldo1 {
+				regulator-name = "vdda_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldo2: ldo2 {
+				regulator-name = "dvdd3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldo3: ldo3 {
+				regulator-name = "vddr_core";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+		};
+	};
+};
+
+&sdhci0 {
+	/* eMMC */
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	bootph-all;
+	status = "okay";
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vddshv_sdio>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	disable-wp;
+	bootph-all;
+	status = "okay";
+};
+
+&main_gpio0 {
+	bootph-all;
+	status = "okay";
+};
+
+&main_gpio1 {
+	bootph-all;
+	status = "okay";
+};
+
+&main_gpio_intr {
+	status = "okay";
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	bootph-all;
+	status = "okay";
+};
+
+&usbss0 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	usb-role-switch;
+
+	port {
+		usb0_hs_ep: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+};
+
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>,
+		    <&main_rgmii2_pins_default>;
+	status = "okay";
+
+	cpts@3d000 {
+		/* MAP HW3_TS_PUSH to GENF1 */
+		ti,pps = <2 1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&cpsw3g_phy0>;
+	status = "okay";
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&cpsw3g_phy1>;
+	status = "okay";
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio0_pins_default>;
+	status = "okay";
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+
+	cpsw3g_phy1: ethernet-phy@3 {
+		reg = <3>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&fss {
+	status = "okay";
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+	status = "okay";
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+				bootph-all;
+			};
+		};
+	};
+};
+
+&wkup_r5fss0_core0 {
+	bootph-pre-ram;
+};
+
+&mcu_r5fss0_core0 {
+	firmware-name = "am62d-mcu-r5f0_0-fw";
+};
+
+&c7x_0 {
+	firmware-name = "am62d-c71_0-fw";
+};
+
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62d2.dtsi b/arch/arm64/boot/dts/ti/k3-am62d2.dtsi
new file mode 100644
index 000000000000..c7d8ab43c72f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62d2.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree Source for AM62D2 SoC family in Quad core configuration
+ *
+ * TRM: https://www.ti.com/lit/pdf/sprujd4
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62a7.dtsi"
+
+/ {
+	model = "Texas Instruments K3 AM62D SoC";
+	compatible = "ti,am62d2";
+};
+
+/delete-node/ &vpu;   /* Video Codec is disabled in AM62D2 SoC */
+/delete-node/ &e5010; /* JPEG Encoder is disabled in AM62D2 SoC */
diff --git a/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi
new file mode 100644
index 000000000000..883beb76ba9c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi
@@ -0,0 +1,580 @@
+// SPDX-License-Identifier: GPL-2.0-only or MIT
+/*
+ * Device Tree file for the AM62L main domain peripherals
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4
+ */
+
+&cbass_main {
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01840000 0x00 0xc0000>,	/* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	gpio0: gpio@600000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 267 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&scmi_pds 34>;
+		clocks = <&scmi_clk 140>;
+		clock-names = "gpio";
+		ti,ngpio = <126>;
+		ti,davinci-gpio-unbanked = <0>;
+	};
+
+	gpio2: gpio@610000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 281 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 284 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 285 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&scmi_pds 35>;
+		clocks = <&scmi_clk 141>;
+		clock-names = "gpio";
+		ti,ngpio = <79>;
+		ti,davinci-gpio-unbanked = <0>;
+	};
+
+	timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scmi_clk 58>;
+		clock-names = "fck";
+		power-domains = <&scmi_pds 15>;
+		ti,timer-pwm;
+	};
+
+	timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scmi_clk 63>;
+		clock-names = "fck";
+		power-domains = <&scmi_pds 16>;
+		ti,timer-pwm;
+	};
+
+	timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scmi_clk 77>;
+		clock-names = "fck";
+		power-domains = <&scmi_pds 17>;
+		ti,timer-pwm;
+	};
+
+	timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scmi_clk 82>;
+		clock-names = "fck";
+		power-domains = <&scmi_pds 18>;
+		ti,timer-pwm;
+	};
+
+	uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 89>;
+		clocks = <&scmi_clk 358>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 77>;
+		clocks = <&scmi_clk 312>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 78>;
+		clocks = <&scmi_clk 314>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 79>;
+		clocks = <&scmi_clk 316>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 80>;
+		clocks = <&scmi_clk 318>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 81>;
+		clocks = <&scmi_clk 320>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 82>;
+		clocks = <&scmi_clk 322>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	conf: bus@9000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x09000000 0x380000>;
+
+		phy_gmii_sel: phy@1be000 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x1be000 0x8>;
+			#phy-cells = <1>;
+		};
+
+		epwm_tbclk: clock-controller@1e9100 {
+			compatible = "ti,am62-epwm-tbclk";
+			reg = <0x1e9100 0x4>;
+			#clock-cells = <1>;
+		};
+	};
+
+	usbss0: dwc3-usb@f900000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f900000 0x00 0x800>,
+		      <0x00 0x0f908000 0x00 0x400>;
+		clocks = <&scmi_clk 331>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&usb_phy_ctrl 0x0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&scmi_pds 95>;
+		ranges;
+		status = "disabled";
+
+		usb0: usb@31000000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31000000 0x00 0x50000>;
+			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
+		};
+	};
+
+	usbss1: dwc3-usb@f910000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f910000 0x00 0x800>,
+		      <0x00 0x0f918000 0x00 0x400>;
+		clocks = <&scmi_clk 338>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&usb_phy_ctrl 0x4>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&scmi_pds 96>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31100000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31100000 0x00 0x50000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+			<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
+		};
+	};
+
+	sdhci1: mmc@fa00000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x00 0x0fa00000 0x00 0x1000>,
+		      <0x00 0x0fa08000 0x00 0x400>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 26>;
+		clocks = <&scmi_clk 106>, <&scmi_clk 109>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&scmi_clk 109>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-legacy = <0x0>;
+		status = "disabled";
+	};
+
+	sdhci0: mmc@fa10000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0xfa10000 0x00 0x1000>,
+		      <0x00 0xfa18000 0x00 0x400>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 28>;
+		clocks = <&scmi_clk 122>, <&scmi_clk 125>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&scmi_clk 125>;
+		bus-width = <8>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-hs200 = <0x6>;
+		status = "disabled";
+	};
+
+	sdhci2: mmc@fa20000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa20000 0x00 0x1000>,
+		      <0x00 0x0fa28000 0x00 0x400>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 27>;
+		clocks = <&scmi_clk 114>, <&scmi_clk 117>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&scmi_clk 117>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-legacy = <0x0>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&scmi_pds 53>;
+		clocks = <&scmi_clk 246>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&scmi_pds 54>;
+		clocks = <&scmi_clk 250>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&scmi_pds 55>;
+		clocks = <&scmi_clk 254>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&scmi_pds 56>;
+		clocks = <&scmi_clk 258>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	mcan0: can@20701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20701000 0x00 0x200>,
+		      <0x00 0x20708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&scmi_pds 47>;
+		clocks = <&scmi_clk 179>, <&scmi_clk 178>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcan1: can@20711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20711000 0x00 0x200>,
+		      <0x00 0x20718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&scmi_pds 48>;
+		clocks = <&scmi_clk 185>, <&scmi_clk 184>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcan2: can@20721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20721000 0x00 0x200>,
+		      <0x00 0x20728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&scmi_pds 49>;
+		clocks = <&scmi_clk 191>, <&scmi_clk 190>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	spi0: spi@20100000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x20100000 0x00 0x400>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&scmi_pds 72>;
+		clocks = <&scmi_clk 299>;
+		status = "disabled";
+	};
+
+	spi1: spi@20110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20110000 0x00 0x400>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&scmi_pds 73>;
+		clocks = <&scmi_clk 302>;
+		status = "disabled";
+	};
+
+	spi2: spi@20120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20120000 0x00 0x400>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&scmi_pds 74>;
+		clocks = <&scmi_clk 305>;
+		status = "disabled";
+	};
+
+	spi3: spi@20130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20130000 0x00 0x400>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&scmi_pds 75>;
+		clocks = <&scmi_clk 308>;
+		status = "disabled";
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x23000000 0x00 0x100>;
+		power-domains = <&scmi_pds 40>;
+		clocks = <&epwm_tbclk 0>, <&scmi_clk 164>;
+		clock-names = "tbclk", "fck";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x23010000 0x00 0x100>;
+		power-domains = <&scmi_pds 41>;
+		clocks = <&epwm_tbclk 1>, <&scmi_clk 165>;
+		clock-names = "tbclk", "fck";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x23020000 0x00 0x100>;
+		power-domains = <&scmi_pds 42>;
+		clocks = <&epwm_tbclk 2>, <&scmi_clk 166>;
+		clock-names = "tbclk", "fck";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	ecap0: pwm@23100000 {
+		compatible = "ti,am3352-ecap";
+		reg = <0x00 0x23100000 0x00 0x100>;
+		power-domains = <&scmi_pds 23>;
+		clocks = <&scmi_clk 99>;
+		clock-names = "fck";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	ecap1: pwm@23110000 {
+		compatible = "ti,am3352-ecap";
+		reg = <0x00 0x23110000 0x00 0x100>;
+		power-domains = <&scmi_pds 24>;
+		clocks = <&scmi_clk 100>;
+		clock-names = "fck";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	ecap2: pwm@23120000 {
+		compatible = "ti,am3352-ecap";
+		reg = <0x00 0x23120000 0x00 0x100>;
+		power-domains = <&scmi_pds 25>;
+		clocks = <&scmi_clk 101>;
+		clock-names = "fck";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	eqep0: counter@23200000 {
+		compatible = "ti,am62-eqep";
+		reg = <0x00 0x23200000 0x00 0x100>;
+		power-domains = <&scmi_pds 29>;
+		clocks = <&scmi_clk 127>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
+	};
+
+	eqep1: counter@23210000 {
+		compatible = "ti,am62-eqep";
+		reg = <0x00 0x23210000 0x00 0x100>;
+		power-domains = <&scmi_pds 30>;
+		clocks = <&scmi_clk 128>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
+	};
+
+	eqep2: counter@23220000 {
+		compatible = "ti,am62-eqep";
+		reg = <0x00 0x23220000 0x00 0x100>;
+		power-domains = <&scmi_pds 31>;
+		clocks = <&scmi_clk 129>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
+	};
+
+	elm0: ecc@25010000 {
+		compatible = "ti,am64-elm";
+		reg = <0x00 0x25010000 0x00 0x2000>;
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&scmi_pds 25>;
+		clocks = <&scmi_clk 102>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	gpmc0: memory-controller@3b000000 {
+		compatible = "ti,am64-gpmc";
+		power-domains = <&scmi_pds 37>;
+		clocks = <&scmi_clk 149>;
+		clock-names = "fck";
+		reg = <0x00 0x3b000000 0x00 0x400>,
+		      <0x00 0x50000000 0x00 0x8000000>;
+		reg-names = "cfg", "data";
+		interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+		gpmc,num-cs = <3>;
+		gpmc,num-waitpins = <2>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "disabled";
+	};
+
+	oc_sram: sram@70800000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70800000 0x00 0x10000>;
+		ranges = <0x00 0x00 0x70800000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scmi_shmem: sram@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x00 0x100>;
+			bootph-all;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi
new file mode 100644
index 000000000000..61bfcdcfc66e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-only or MIT
+/*
+ * Device Tree file for the AM62L wakeup domain peripherals
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+
+&cbass_wakeup {
+	vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&scmi_pds 46>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	pmx0: pinctrl@4084000 {
+		compatible = "ti,am62l-padconf", "pinctrl-single";
+		reg = <0x00 0x4084000 0x00 0x24c>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+		#pinctrl-cells = <1>;
+	};
+
+	wkup_gpio0: gpio@4201000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x04201000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 704 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 705 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 706 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 707 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&scmi_pds 36>;
+		clocks = <&scmi_clk 146>;
+		clock-names = "gpio";
+		ti,ngpio = <7>;
+		ti,davinci-gpio-unbanked = <0>;
+		status = "disabled";
+	};
+
+	wkup_timer0: timer@2b100000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2b100000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scmi_clk 93>;
+		clock-names = "fck";
+		power-domains = <&scmi_pds 19>;
+		ti,timer-pwm;
+	};
+
+	wkup_timer1: timer@2b110000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2b110000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scmi_clk 98>;
+		clock-names = "fck";
+		power-domains = <&scmi_pds 20>;
+		ti,timer-pwm;
+	};
+
+	wkup_i2c0: i2c@2b200000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2b200000 0x00 0x100>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&scmi_pds 57>;
+		clocks = <&scmi_clk 262>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	target-module@2b300050 {
+		compatible = "ti,sysc-omap2", "ti,sysc";
+		reg = <0x00 0x2b300050 0x00 0x4>,
+		      <0x00 0x2b300054 0x00 0x4>,
+		      <0x00 0x2b300058 0x00 0x4>;
+		reg-names = "rev", "sysc", "syss";
+		ranges = <0x00 0x00 0x2b300000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&scmi_pds 83>;
+		clocks = <&scmi_clk 324>;
+		clock-names = "fck";
+		ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+				 SYSC_OMAP2_SOFTRESET |
+				 SYSC_OMAP2_AUTOIDLE)>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>,
+				<SYSC_IDLE_SMART_WKUP>;
+		ti,syss-mask = <1>;
+		ti,no-reset-on-init;
+		status = "disabled";
+
+		wkup_uart0: serial@0 {
+			compatible = "ti,am64-uart", "ti,am654-uart";
+			reg = <0x00 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk 324>;
+			assigned-clocks = <&scmi_clk 324>;
+			clock-names = "fclk";
+			status = "disabled";
+		};
+	};
+
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		ranges = <0x00 0x00 0x43000000 0x80000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+			bootph-all;
+		};
+
+		cpsw_mac_syscon: ethernet-mac-syscon@2000 {
+			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
+			reg = <0x2000 0x8>;
+		};
+
+		usb_phy_ctrl: syscon@45000 {
+			compatible = "ti,am62-usb-phy-ctrl", "syscon";
+			reg = <0x45000 0x1000>;
+			bootph-all;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62l.dtsi b/arch/arm64/boot/dts/ti/k3-am62l.dtsi
new file mode 100644
index 000000000000..23acdbb301fe
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62l.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only or MIT
+/*
+ * Device Tree Source for AM62L SoC Family
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM62L3 SoC";
+	compatible = "ti,am62l3";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x82004000>;
+			shmem = <&scmi_shmem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+				bootph-all;
+			};
+
+			scmi_pds: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+				bootph-all;
+			};
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f0000 {
+		compatible = "simple-bus";
+		ranges = <0x00 0x00600000 0x00 0x00600000 0x00 0x00010100>, /* GPIO */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First Peripheral Window */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000400>, /* Timesync Router */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* CPSW */
+			 <0x00 0x09000000 0x00 0x09000000 0x00 0x00400000>, /* CTRL MMRs */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x1a001400>, /* Second Peripheral Window */
+			 <0x00 0x301c0000 0x00 0x301c0000 0x00 0x00001000>, /* DPHY-TX */
+			 <0x00 0x30200000 0x00 0x30200000 0x00 0x0000b000>, /* DSS */
+			 <0x00 0x30270000 0x00 0x30270000 0x00 0x00390000>, /* DSI Wrapper */
+			 <0x00 0x30500000 0x00 0x30500000 0x00 0x00100000>, /* DSI Config */
+			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core Window */
+			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core Window */
+			 <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0 */
+			 <0x00 0x45810000 0x00 0x45810000 0x00 0x03170000>, /* DMSS */
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC DATA */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS DAT1 */
+			 <0x00 0x70800000 0x00 0x70800000 0x00 0x00018000>, /* OCSRAM */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x04 0x00000000 0x04 0x00000000 0x01 0x00000000>, /* FSS DAT0 */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS DAT3 */
+
+			 /* Wakeup Domain Range */
+			 <0x00 0x00a80000 0x00 0x00a80000 0x00 0x00034000>, /* GTC */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00001400>, /* VTM */
+			 <0x00 0x04080000 0x00 0x04080000 0x00 0x00008000>, /* PDCFG */
+			 <0x00 0x04201000 0x00 0x04201000 0x00 0x00000100>, /* GPIO */
+			 <0x00 0x2b100000 0x00 0x2b100000 0x00 0x00100100>, /* Wakeup Peripheral Window */
+			 <0x00 0x40800000 0x00 0x40800000 0x00 0x00014000>, /* DMA */
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00080000>; /* CTRL MMRs */
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		cbass_wakeup: bus@a80000 {
+			compatible = "simple-bus";
+			ranges = <0x00 0x00a80000 0x00 0x00a80000 0x00 0x00034000>, /* GTC */
+				 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00001400>, /* VTM */
+				 <0x00 0x04080000 0x00 0x04080000 0x00 0x00008000>, /* PDCFG */
+				 <0x00 0x04201000 0x00 0x04201000 0x00 0x00000100>, /* GPIO */
+				 <0x00 0x2b100000 0x00 0x2b100000 0x00 0x00100100>, /* Wakeup Peripheral Window */
+				 <0x00 0x40800000 0x00 0x40800000 0x00 0x00014000>, /* DMA */
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00080000>; /* CTRL MMRs */
+			#address-cells = <2>;
+			#size-cells = <2>;
+		};
+	};
+};
+
+/* Now include peripherals for each bus segment */
+#include "k3-am62l-main.dtsi"
+#include "k3-am62l-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
new file mode 100644
index 000000000000..cae04cce3373
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0-only or MIT
+/*
+ * Device Tree file for the AM62L3 Evaluation Module
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4
+ * Data Sheet: https://www.ti.com/lit/pdf/sprspa1
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "k3-am62l3.dtsi"
+#include "k3-pinctrl.h"
+
+/ {
+	compatible = "ti,am62l3-evm", "ti,am62l3";
+	model = "Texas Instruments AM62L3 Evaluation Module";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		device_type = "memory";
+		bootph-all;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_button_pins_default>;
+
+		usr: button-usr {
+			label = "User Key";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_led_pins_default>;
+
+		led-0 {
+			label = "am62-sk:green:heartbeat";
+			gpios = <&gpio0 123 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "on";
+		};
+	};
+
+	thermal-zones {
+		wkup0-thermal {
+			polling-delay-passive = <250>;	/* milliSeconds */
+			polling-delay = <500>;		/* milliSeconds */
+			thermal-sensors = <&vtm0 0>;
+
+			trips {
+				crit0 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_3v3_sys: regulator-1 {
+		/* output of LM61460-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-2 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc_3v3_sys>;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vcc_1v8: regulator-3 {
+		/* output of TPS6282518DMQ */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&gpio0 {
+	bootph-all;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@51 {
+		/* AT24C512C-MAHM-T or M24512-DFMC6TG */
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "", "",
+				  "UART1_FET_SEL", "MMC1_SD_EN",
+				  "VPP_LDO_EN", "EXP_PS_3V3_EN",
+				  "UART1_FET_BUF_EN", "", "",
+				  "", "DSI_GPIO0", "DSI_GPIO1",
+				  "", "BT_UART_WAKE_SOC_3V3",
+				  "USB_TYPEA_OC_INDICATION", "",
+				  "", "WLAN_ALERTn", "", "",
+				  "HDMI_INTn", "TEST_GPIO2",
+				  "MCASP0_FET_EN", "MCASP0_BUF_BT_EN",
+				  "MCASP0_FET_SEL", "DSI_EDID",
+				  "PD_I2C_IRQ", "IO_EXP_TEST_LED";
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <91 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio0_ioexp_intr_pins_default>;
+		bootph-all;
+	};
+
+	exp2: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_EN_SOC", "VOUT0_FET_SEL0",
+				  "", "",
+				  "", "",
+				  "", "",
+				  "WL_LT_EN", "EXP_PS_5V0_EN",
+				  "TP45", "TP48",
+				  "TP46", "TP49",
+				  "TP47", "TP50",
+				  "GPIO_QSPI_NAND_RSTn", "GPIO_HDMI_RSTn",
+				  "GPIO_CPSW1_RST", "GPIO_CPSW2_RST",
+				  "", "GPIO_AUD_RSTn",
+				  "GPIO_eMMC_RSTn", "SoC_WLAN_SDIO_RST";
+		bootph-all;
+	};
+
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	typec_pd0: tps658x@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+
+			port {
+				usb_con_hs: endpoint {
+					remote-endpoint = <&usb0_hs_ep>;
+				};
+			};
+		};
+	};
+};
+
+&pmx0 {
+	gpio0_ioexp_intr_pins_default: gpio0-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x01b0, PIN_INPUT, 7) /* (B12) SPI0_D1.GPIO0_91 */
+		>;
+		bootph-all;
+	};
+
+	i2c0_pins_default: i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x01cc, PIN_INPUT_PULLUP, 0) /* (B7) I2C0_SCL */
+			AM62LX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 0) /* (A7) I2C0_SDA */
+		>;
+		bootph-all;
+	};
+
+	i2c1_pins_default: i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 0) /* (D7) I2C1_SCL */
+			AM62LX_IOPAD(0x01d8, PIN_INPUT_PULLUP, 0) /* (A6) I2C1_SDA */
+		>;
+		bootph-all;
+	};
+
+	i2c2_pins_default: i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x01dc, PIN_INPUT_PULLUP, 0) /* (B8) I2C2_SCL */
+			AM62LX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D8) I2C2_SDA */
+		>;
+	};
+
+	mmc0_pins_default: mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (D2) MMC0_CMD */
+			AM62LX_IOPAD(0x020c, PIN_OUTPUT, 0) /* (B2) MMC0_CLK */
+			AM62LX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (D3) MMC0_DAT0 */
+			AM62LX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (D4) MMC0_DAT1 */
+			AM62LX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (C1) MMC0_DAT2 */
+			AM62LX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (C2) MMC0_DAT3 */
+			AM62LX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (C4) MMC0_DAT4 */
+			AM62LX_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B3) MMC0_DAT5 */
+			AM62LX_IOPAD(0x01f0, PIN_INPUT_PULLUP, 0) /* (A3) MMC0_DAT6 */
+			AM62LX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B4) MMC0_DAT7 */
+		>;
+		bootph-all;
+	};
+
+	mmc1_pins_default: mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x0230, PIN_INPUT, 0) /* (Y3) MMC1_CMD */
+			AM62LX_IOPAD(0x0228, PIN_OUTPUT, 0) /* (Y2) MMC1_CLK */
+			AM62LX_IOPAD(0x0224, PIN_INPUT, 0) /* (AA1) MMC1_DAT0 */
+			AM62LX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y4) MMC1_DAT1 */
+			AM62LX_IOPAD(0x021c, PIN_INPUT_PULLUP, 0) /* (AA2) MMC1_DAT2 */
+			AM62LX_IOPAD(0x0218, PIN_INPUT_PULLUP, 0) /* (AB2) MMC1_DAT3 */
+			AM62LX_IOPAD(0x0234, PIN_INPUT, 0) /* (B6) MMC1_SDCD */
+		>;
+		bootph-all;
+	};
+
+	uart0_pins_default: uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x01b4, PIN_INPUT, 0) /* (D13) UART0_RXD */
+			AM62LX_IOPAD(0x01b8, PIN_OUTPUT, 0) /* (C13) UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	usb1_default_pins: usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x0248, PIN_INPUT | PIN_DS_PULLUD_ENABLE | PIN_DS_PULL_UP, 0) /* (A5) USB1_DRVVBUS */
+		>;
+	};
+
+	usr_button_pins_default: usr-button-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x01ac, PIN_INPUT, 7) /* (E12) SPI0_D0.GPIO0_90 */
+		>;
+	};
+
+	usr_led_pins_default: usr-led-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x0238, PIN_OUTPUT, 7) /* (D24) MMC1_SDWP.GPIO0_123 */
+		>;
+	};
+
+};
+
+&sdhci0 {
+	/* eMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+	non-removable;
+	status = "okay";
+	bootph-all;
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+	vmmc-supply = <&vdd_mmc1>;
+	disable-wp;
+	status = "okay";
+	bootph-all;
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	bootph-all;
+};
+
+&usbss0 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	usb-role-switch;
+
+	port {
+		usb0_hs_ep: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+};
+
+&usbss1 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_default_pins>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62l3.dtsi b/arch/arm64/boot/dts/ti/k3-am62l3.dtsi
new file mode 100644
index 000000000000..da220b851512
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62l3.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only or MIT
+/*
+ * Device Tree file for the AM62L3 SoC family (Dual Core A53)
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4
+ */
+
+/dts-v1/;
+
+#include "k3-am62l.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+		};
+	};
+
+	l2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x40000>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 41e1c24b1144..3cf7c2b3ce2d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -46,6 +46,24 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x20000>;
 
+		audio_refclk0: clock-controller@82e0 {
+			compatible = "ti,am62-audio-refclk";
+			reg = <0x82e0 0x4>;
+			clocks = <&k3_clks 157 0>;
+			assigned-clocks = <&k3_clks 157 0>;
+			assigned-clock-parents = <&k3_clks 157 16>;
+			#clock-cells = <0>;
+		};
+
+		audio_refclk1: clock-controller@82e4 {
+			compatible = "ti,am62-audio-refclk";
+			reg = <0x82e4 0x4>;
+			clocks = <&k3_clks 157 18>;
+			assigned-clocks = <&k3_clks 157 18>;
+			assigned-clock-parents = <&k3_clks 157 34>;
+			#clock-cells = <0>;
+		};
+
 		phy_gmii_sel: phy@4044 {
 			compatible = "ti,am654-phy-gmii-sel";
 			reg = <0x4044 0x8>;
@@ -227,9 +245,18 @@
 		reg = <0x00 0x40900000 0x00 0x1200>;
 		#address-cells = <2>;
 		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+
 		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
 		       <&main_pktdma 0x7507 0>;
 		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@40910000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x40910000 0x0 0x7d>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			status = "reserved";
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -250,7 +277,7 @@
 
 	main_pmx0: pinctrl@f4000 {
 		compatible = "pinctrl-single";
-		reg = <0x00 0xf4000 0x00 0x2ac>;
+		reg = <0x00 0xf4000 0x00 0x2b0>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
@@ -564,20 +591,15 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 1>, <&k3_clks 57 2>;
 		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 2>;
-		assigned-clock-parents = <&k3_clks 57 4>;
 		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
 		ti,clkbuf-sel = <0x7>;
-		ti,strobe-sel = <0x77>;
 		ti,trm-icp = <0x8>;
 		ti,otap-del-sel-legacy = <0x1>;
 		ti,otap-del-sel-mmc-hs = <0x1>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x8>;
-		ti,otap-del-sel-hs400 = <0x5>;
 		ti,itap-del-sel-legacy = <0x10>;
 		ti,itap-del-sel-mmc-hs = <0xa>;
 		ti,itap-del-sel-ddr52 = <0x3>;
@@ -651,6 +673,7 @@
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			bootph-all;
 			snps,usb2-gadget-lpm-disable;
 			snps,usb2-lpm-disable;
 		};
@@ -768,6 +791,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	mailbox0_cluster1: mailbox@29010000 {
@@ -777,6 +801,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	mailbox0_cluster2: mailbox@29020000 {
@@ -786,6 +811,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	mailbox0_cluster3: mailbox@29030000 {
@@ -795,6 +821,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	ecap0: pwm@23100000 {
@@ -1033,6 +1060,9 @@
 		cdns_csi2rx0: csi-bridge@30101000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x30101000 0x00 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
 				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
index b33aff0d65c9..5288c959f3c1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
@@ -12,15 +12,7 @@
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
-		pinctrl-single,gpio-range =
-			<&mcu_pmx_range 0 21 PIN_GPIO_RANGE_IOPAD>,
-			<&mcu_pmx_range 23 1 PIN_GPIO_RANGE_IOPAD>,
-			<&mcu_pmx_range 32 2 PIN_GPIO_RANGE_IOPAD>;
 		bootph-all;
-
-		mcu_pmx_range: gpio-range {
-			#pinctrl-single,gpio-range-cells = <3>;
-		};
 	};
 
 	mcu_esm: esm@4100000 {
@@ -213,6 +205,7 @@
 			ti,atcm-enable = <0>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <0>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi
index c7486fb2a5b4..138b9c395be4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi
@@ -12,12 +12,29 @@ thermal_zones: thermal-zones {
 		thermal-sensors = <&wkup_vtm0 0>;
 
 		trips {
+			main0_alert: main0-alert {
+				temperature = <115000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
 			main0_crit: main0-crit {
 				temperature = <125000>;	/* milliCelsius */
 				hysteresis = <2000>;	/* milliCelsius */
 				type = "critical";
 			};
 		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main0_alert>;
+				cooling-device =
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
 	};
 
 	main1_thermal: main1-thermal {
@@ -26,12 +43,29 @@ thermal_zones: thermal-zones {
 		thermal-sensors = <&wkup_vtm0 1>;
 
 		trips {
+			main1_alert: main1-alert {
+				temperature = <115000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
 			main1_crit: main1-crit {
 				temperature = <125000>;	/* milliCelsius */
 				hysteresis = <2000>;	/* milliCelsius */
 				type = "critical";
 			};
 		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main1_alert>;
+				cooling-device =
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
 	};
 
 	main2_thermal: main2-thermal {
@@ -40,11 +74,28 @@ thermal_zones: thermal-zones {
 	       thermal-sensors = <&wkup_vtm0 2>;
 
 		trips {
+			main2_alert: main2-alert {
+				temperature = <115000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
 			main2_crit: main2-crit {
 				temperature = <125000>;	/* milliCelsius */
 				hysteresis = <2000>;	/* milliCelsius */
 				type = "critical";
 			};
 		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main2_alert>;
+				cooling-device =
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
index 6f32135f00a5..8612b45e665c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
@@ -2,9 +2,11 @@
 /*
  * Device Tree file for the WAKEUP domain peripherals shared by AM62P and J722S
  *
- * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2025 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
+
 &cbass_wakeup {
 	wkup_conf: bus@43000000 {
 		compatible = "simple-bus";
@@ -41,14 +43,34 @@
 		};
 	};
 
-	wkup_uart0: serial@2b300000 {
-		compatible = "ti,am64-uart", "ti,am654-uart";
-		reg = <0x00 0x2b300000 0x00 0x100>;
-		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+	target-module@2b300050 {
+		compatible = "ti,sysc-omap2", "ti,sysc";
+		reg = <0 0x2b300050 0 0x4>,
+		      <0 0x2b300054 0 0x4>,
+		      <0 0x2b300058 0 0x4>;
+		reg-names = "rev", "sysc", "syss";
+		ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+				 SYSC_OMAP2_SOFTRESET |
+				 SYSC_OMAP2_AUTOIDLE)>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>,
+				<SYSC_IDLE_SMART_WKUP>;
+		ti,syss-mask = <1>;
+		ti,no-reset-on-init;
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 114 0>;
-		clock-names = "fclk";
-		status = "disabled";
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x2b300000 0x100000>;
+
+		wkup_uart0: serial@0 {
+			compatible = "ti,am64-uart", "ti,am654-uart";
+			reg = <0 0x100>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
 	};
 
 	wkup_i2c0: i2c@2b200000 {
@@ -114,6 +136,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 420c77c8e9e5..13d32cbff186 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -42,20 +42,6 @@
 	ti,interrupt-ranges = <5 69 35>;
 };
 
-&main_pmx0 {
-	pinctrl-single,gpio-range =
-		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 72 22 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>;
-
-	main_pmx0_range: gpio-range {
-		#pinctrl-single,gpio-range-cells = <3>;
-	};
-};
-
 &main_gpio0 {
 	gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>,
 			<&main_pmx0 70 72 22>;
@@ -68,3 +54,9 @@
 	gpio-reserved-ranges = <32 10>;
 	ti,ngpio = <52>;
 };
+
+&sdhci0 {
+	mmc-hs400-1_8v;
+	ti,strobe-sel = <0x66>;
+	ti,otap-del-sel-hs400 = <0x5>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..d29a5dbe13ef
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62P SoCs
+ *
+ * Copyright (C) 2023-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core0_dma_memory_region: memory@9b800000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9b800000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core0_memory_region: memory@9b900000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9b900000 0x00 0xf00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin-dahlia.dtsi
new file mode 100644
index 000000000000..ee3feac6ea5d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin-dahlia.dtsi
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM on Dahlia carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/ {
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	reg_1v8_sw: regulator-1v8-sw {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-carrier +V1.8_SW";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "verdin-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm2 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_1_reset>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	status = "okay";
+
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s1_mclk>;
+		clocks = <&audio_refclk0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_1v8_sw>;
+		CPVDD-supply = <&reg_1v8_sw>;
+		DBVDD-supply = <&reg_1v8_sw>;
+		DCVDD-supply = <&reg_1v8_sw>;
+		MICVDD-supply = <&reg_1v8_sw>;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c1 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	status = "okay";
+};
+
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi
new file mode 100644
index 000000000000..a0d5b15fc147
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM on Development carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/ {
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "verdin-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&nau8822_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>, <&pinctrl_rgmii2>;
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+
+	carrier_eth_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth2_rgmii_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
+		micrel,led-mode = <0>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+	phy-handle = <&carrier_eth_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm2 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_1_reset>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	status = "okay";
+
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s1_mclk>;
+		clock-names = "mclk";
+		clocks = <&audio_refclk0>;
+		#sound-dai-cells = <0>;
+	};
+
+	carrier_gpio_expander: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c1 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1, connector X50 through RS485 transceiver */
+&main_uart1 {
+	rs485-rx-during-tx;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi
new file mode 100644
index 000000000000..04f13edcb166
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi
@@ -0,0 +1,629 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM on Ivy carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/ivy-carrier-board
+ */
+
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	/* AIN1 Voltage w/o AIN1_MODE gpio control */
+	ain1_voltage_unmanaged: voltage-divider-ain1 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc1 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN1 Current w/o AIN1_MODE gpio control */
+	ain1_current_unmanaged: current-sense-shunt-ain1 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc1 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN1_MODE - SODIMM 216 */
+	ain1_mode_mux_ctrl: mux-controller-0 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_5>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain1-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain1_voltage", "";
+		io-channels = <&ain1_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain1-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain1_current";
+		io-channels = <&ain1_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain1_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	/* AIN2 Voltage w/o AIN2_MODE gpio control */
+	ain2_voltage_unmanaged: voltage-divider-ain2 {
+		compatible = "voltage-divider";
+		#io-channel-cells = <1>;
+		io-channels = <&ivy_adc2 0>;
+		full-ohms = <19>;
+		output-ohms = <1>;
+	};
+
+	/* AIN2 Current w/o AIN2_MODE gpio control */
+	ain2_current_unmanaged: current-sense-shunt-ain2 {
+		compatible = "current-sense-shunt";
+		#io-channel-cells = <0>;
+		io-channels = <&ivy_adc2 1>;
+		shunt-resistor-micro-ohms = <100000000>;
+	};
+
+	/* AIN2_MODE - SODIMM 218 */
+	ain2_mode_mux_ctrl: mux-controller-1 {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_6>;
+		#mux-control-cells = <0>;
+		mux-gpios = <&main_gpio0 50 GPIO_ACTIVE_HIGH>;
+	};
+
+	ain2-voltage {
+		compatible = "io-channel-mux";
+		channels = "ain2_voltage", "";
+		io-channels = <&ain2_voltage_unmanaged 0>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	ain2-current {
+		compatible = "io-channel-mux";
+		channels = "", "ain2_current";
+		io-channels = <&ain2_current_unmanaged>;
+		io-channel-names = "parent";
+		mux-controls = <&ain2_mode_mux_ctrl>;
+		settle-time-us = <1000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ivy_leds>;
+
+		/* D7 Blue - SODIMM 30 - LEDs.GPIO1 */
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&main_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Green - SODIMM 32 - LEDs.GPIO2 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&main_gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D7 Red - SODIMM 34 - LEDs.GPIO3 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&main_gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Blue - SODIMM 36 - LEDs.GPIO4 */
+		led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&main_gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Green - SODIMM 54 - LEDs.GPIO5 */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D8 Red - SODIMM 44 - LEDs.GPIO6 */
+		led-5 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 37 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Blue - SODIMM 46 - LEDs.GPIO7 */
+		led-6 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* D9 Red - SODIMM 48 - LEDs.GPIO8 */
+		led-7 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&main_gpio0 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_3v2_ain1: regulator-3v2-ain1 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN1";
+	};
+
+	reg_3v2_ain2: regulator-3v2-ain2 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3200000>;
+		regulator-min-microvolt = <3200000>;
+		regulator-name = "+3V2_AIN2";
+	};
+
+	/* Ivy Power Supply Input Voltage */
+	ivy-input-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_1 */
+		io-channels = <&som_adc 7>;
+		full-ohms = <204700>; /* 200K + 4.7K */
+		output-ohms = <4700>;
+	};
+
+	ivy-5v-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_2 */
+		io-channels = <&som_adc 6>;
+		full-ohms = <39000>; /* 27K + 12K */
+		output-ohms = <12000>;
+	};
+
+	ivy-3v3-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_3 */
+		io-channels = <&som_adc 5>;
+		full-ohms = <54000>; /* 27K + 27K */
+		output-ohms = <27000>;
+	};
+
+	ivy-1v8-voltage {
+		compatible = "voltage-divider";
+		/* Verdin ADC_4 */
+		io-channels = <&som_adc 4>;
+		full-ohms = <39000>; /* 12K + 27K */
+		output-ohms = <27000>;
+	};
+};
+
+&main_pmx0 {
+	pinctrl_ivy_leds: ivy-leds-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x019c, PIN_INPUT, 7) /* (E24)  MCASP0_AXR1.GPIO1_9    */ /* SODIMM 36 */
+			AM62PX_IOPAD(0x01a0, PIN_INPUT, 7) /* (F23)  MCASP0_AXR0.GPIO1_10   */ /* SODIMM 34 */
+			AM62PX_IOPAD(0x01a4, PIN_INPUT, 7) /* (F24)  MCASP0_ACLKX.GPIO1_11  */ /* SODIMM 30 */
+			AM62PX_IOPAD(0x01a8, PIN_INPUT, 7) /* (F25)  MCASP0_AFSX.GPIO1_12   */ /* SODIMM 32 */
+			AM62PX_IOPAD(0x0088, PIN_INPUT, 7) /* (R24)  GPMC0_OEn_REn.GPIO0_33 */ /* SODIMM 48 */
+			AM62PX_IOPAD(0x0098, PIN_INPUT, 7) /* (AA24) GPMC0_WAIT0.GPIO0_37   */ /* SODIMM 44 */
+			AM62PX_IOPAD(0x008c, PIN_INPUT, 7) /* (T25)  GPMC0_WEn.GPIO0_34     */ /* SODIMM 46 */
+			AM62PX_IOPAD(0x002c, PIN_INPUT, 7) /* (M25)  OSPI0_CSn0.GPIO0_11    */ /* SODIMM 54 */
+		>;
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>, <&pinctrl_rgmii2>;
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+
+	carrier_eth_phy: ethernet-phy@2 {
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth2_rgmii_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+	phy-handle = <&carrier_eth_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_1_reset>,
+		    <&pinctrl_qspi1_cs2_gpio>,
+		    <&pinctrl_qspi1_dqs_gpio>,
+		    <&pinctrl_qspi1_io0_gpio>,
+		    <&pinctrl_qspi1_io1_gpio>,
+		    <&pinctrl_qspi1_io2_gpio>,
+		    <&pinctrl_qspi1_io3_gpio>;
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"REL4",   /* SODIMM 66 */
+		"DIGI_1", /* SODIMM 56 */
+		"DIGI_2", /* SODIMM 58 */
+		"REL1",   /* SODIMM 60 */
+		"REL2",   /* SODIMM 62 */
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"REL3", /* SODIMM 64 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 30 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 40 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 50 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 60 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 70 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 80 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 90 */
+		"";
+};
+
+&main_gpio1 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 30 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 40 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 50 */
+		"";
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+
+	ivy_adc1: adc@40 {
+		compatible = "ti,ads1119";
+		reg = <0x40>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_7>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <51 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain1>;
+		dvdd-supply = <&reg_3v2_ain1>;
+		vref-supply = <&reg_3v2_ain1>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN1 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN1 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+
+	ivy_adc2: adc@41 {
+		compatible = "ti,ads1119";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_8>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <52 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&reg_3v2_ain2>;
+		dvdd-supply = <&reg_3v2_ain2>;
+		vref-supply = <&reg_3v2_ain2>;
+		#address-cells = <1>;
+		#io-channel-cells = <1>;
+		#size-cells = <0>;
+
+		/* AIN2 0-33V Voltage Input */
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+		};
+
+		/* AIN2 0-20mA Current Input */
+		channel@1 {
+			reg = <1>;
+			diff-channels = <2 3>;
+		};
+	};
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-0 = <&pinctrl_main_spi1>,
+		    <&pinctrl_main_spi1_cs0>,
+		    <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_4>;
+	cs-gpios = <0>,
+		   <&mcu_gpio0 1 GPIO_ACTIVE_LOW>,
+		   <&mcu_gpio0 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <18500000>;
+	};
+
+	fram@2 {
+		compatible = "fujitsu,mb85rs256", "atmel,at25";
+		reg = <2>;
+		address-width = <16>;
+		size = <32768>;
+		spi-max-frequency = <33000000>;
+		pagesize = <1>;
+	};
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>;
+	gpio-line-names =
+		"",
+		"",
+		"GPIO2", /* Verdin GPIO_2 - SODIMM 208 */
+		"GPIO3", /* Verdin GPIO_3 - SODIMM 210 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin-mallow.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin-mallow.dtsi
new file mode 100644
index 000000000000..37c0b9da82da
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin-mallow.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm2 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_1_reset>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c1 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-0 = <&pinctrl_main_spi1>,
+		    <&pinctrl_main_spi1_cs0>,
+		    <&pinctrl_qspi1_cs2_gpio>;
+	cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin-nonwifi.dtsi
new file mode 100644
index 000000000000..8e7019f00e65
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin-nonwifi.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM non-WB variant
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ */
+
+/* SDIO on MSP 30, 31, 32, 33, 34, 35 */
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci2>;
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin-wifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin-wifi.dtsi
new file mode 100644
index 000000000000..04d3124b5e0f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin-wifi.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM WB variant
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ */
+
+/* On-module Bluetooth */
+&main_uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+		fw-init-baudrate = <3000000>;
+	};
+};
+
+/* On-module Wi-Fi */
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci2>;
+	keep-power-in-suspend;
+	non-removable;
+	ti,fails-without-test-cd;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin-yavia.dtsi
new file mode 100644
index 000000000000..b7423a774dc5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin-yavia.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM on Yavia carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>,
+			    <&pinctrl_qspi1_io2_gpio>,
+			    <&pinctrl_qspi1_io3_gpio>;
+
+		/* SODIMM 52 - LD1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - LD1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - LD1_BLUE */
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - LD2_RED */
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 60 - LD2_GREEN */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 62 - LD2_BLUE */
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm2 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_1_reset>,
+		    <&pinctrl_qspi1_cs2_gpio>,
+		    <&pinctrl_qspi1_dqs_gpio>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c1 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
new file mode 100644
index 000000000000..5e050cbb9eaf
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
@@ -0,0 +1,1418 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * Common dtsi for Verdin AM62P SoM
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		can0 = &main_mcan0;
+		can1 = &mcu_mcan0;
+		eeprom0 = &som_eeprom;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &main_i2c0;
+		i2c2 = &main_i2c1;
+		i2c3 = &mcu_i2c0;
+		i2c4 = &main_i2c3;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		rtc0 = &som_rtc_i2c;
+		rtc1 = &wkup_rtc0;
+		serial0 = &main_uart1;
+		serial1 = &wkup_uart0;
+		serial2 = &main_uart0;
+		serial3 = &mcu_uart0;
+		serial4 = &main_uart6;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_id>;
+		id-gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		label = "USB_1";
+		self-powered;
+		vbus-supply = <&reg_usb0_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb0_ep>;
+			};
+		};
+	};
+
+	verdin_gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_wake1_mico>;
+		status = "disabled";
+
+		key-wakeup {
+			debounce-interval = <10>;
+			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
+			gpios = <&main_gpio0 1 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	memory@80000000 {
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		device_type = "memory";
+	};
+
+	opp-table {
+		/* Add 1.4GHz OPP. Requires VDD_CORE to be at 0.85V */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	reg_force_sleep_moci: regulator-force-sleep-moci {
+		compatible = "regulator-fixed";
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <&som_gpio_expander 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "CTRL_SLEEP_MOCI#";
+	};
+
+	/* Verdin SD_1 Power Supply */
+	reg_sd1_vmmc: regulator-sdhci1-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd1_pwr_en>;
+		/* Verdin SD_1_PWR_EN (SODIMM 76) */
+		gpios = <&main_gpio0 47 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SD";
+		startup-delay-us = <2000>;
+	};
+
+	reg_sd1_vqmmc: regulator-sdhci1-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd_vsel>;
+		/* PMIC_VSEL_SD */
+		gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+		regulator-name = "LDO1-VSEL-SD (PMIC)";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		vin-supply = <&reg_sd_3v3_1v8>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_en>;
+		/* Verdin USB_1_EN (SODIMM 155) */
+		gpios = <&main_gpio1 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_1_EN";
+	};
+
+	/* Module Power Supply */
+	reg_vsodimm: regulator-vsodimm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V_SODIMM";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x01e00000>;
+			no-map;
+		};
+	};
+};
+
+&main_pmx0 {
+	/* Verdin PWM_3_DSI */
+	pinctrl_epwm0_b: main-epwm0b-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01b8, PIN_OUTPUT, 2) /* (E20) SPI0_CS1.EHRPWM0_B */ /* SODIMM 19 */
+		>;
+	};
+
+	/* Verdin PWM_2 */
+	pinctrl_epwm2_a: main-epwm2a-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0124, PIN_OUTPUT, 4) /* (J25) MMC2_SDCD.EHRPWM2_A */ /* SODIMM 16 */
+		>;
+	};
+
+	/* Verdin PWM_1 */
+	pinctrl_epwm2_b: main-epwm2b-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0128, PIN_OUTPUT, 4) /* (K25) MMC2_SDWP.EHRPWM2_B */ /* SODIMM 15 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CLK as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_clk_gpio: main-gpio0-0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0000, PIN_INPUT, 7) /* (P23) OSPI0_CLK.GPIO0_0 */ /* SODIMM 52 */
+		>;
+	};
+
+	/* Verdin CTRL_WAKE1_MICO# */
+	pinctrl_ctrl_wake1_mico: main-gpio0-1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0004, PIN_INPUT, 7) /* (N23) OSPI0_LBCLKO.GPIO0_1 */ /* SODIMM 252 */
+		>;
+	};
+
+	/* Verdin QSPI_1_DQS as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_dqs_gpio: main-gpio0-2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0008, PIN_INPUT, 7) /* (P22) OSPI0_DQS.GPIO0_2 */ /* SODIMM 66 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO0 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io0_gpio: main-gpio0-3-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x000c, PIN_INPUT, 7) /* (L25) OSPI0_D0.GPIO0_3 */ /* SODIMM 56 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO1 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io1_gpio: main-gpio0-4-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0010, PIN_INPUT, 7) /* (N24) OSPI0_D1.GPIO0_4 */ /* SODIMM 58 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO2 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io2_gpio: main-gpio0-5-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0014, PIN_INPUT, 7) /* (N25) OSPI0_D2.GPIO0_5 */ /* SODIMM 60 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO3 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io3_gpio: main-gpio0-6-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0018, PIN_INPUT, 7) /* (M24) OSPI0_D3.GPIO0_6 */ /* SODIMM 62 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x002c, PIN_INPUT, 7) /* (M25) OSPI0_CSn0.GPIO0_11 */ /* SODIMM 54 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CS2# as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_cs2_gpio: main-gpio0-12-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0030, PIN_INPUT, 7) /* (L24) OSPI0_CSn1.GPIO0_12 */ /* SODIMM 64 */
+		>;
+	};
+
+	/* Verdin MSP_37 as GPIO */
+	pinctrl_msp37_gpio: main-gpio0-13-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0034, PIN_INPUT, 7) /* (L22) OSPI0_CSn2.GPIO0_13 */ /* SODIMM 174 - WiFi_W_WKUP_HOST# */
+		>;
+	};
+
+	/* Verdin PCIE_1_RESET# */
+	pinctrl_pcie_1_reset: main-gpio0-14-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0038, PIN_INPUT, 7) /* (L23) OSPI0_CSn3.GPIO0_14 */ /* SODIMM 244 */
+		>;
+	};
+
+	pinctrl_sd_vsel: main-gpio0-21-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0054, PIN_INPUT, 7) /* (V24) GPMC0_AD6.GPIO0_21 */ /* PMIC_SD_VSEL */
+		>;
+	};
+
+	pinctrl_tpm_extint: main-gpio0-25-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0064, PIN_INPUT, 7) /* (AA25) GPMC0_AD10.GPIO0_25 */ /* TPM_EXTINT# */
+		>;
+	};
+
+	pinctrl_wifi_wkup_bt: main-gpio0-29-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0074, PIN_INPUT, 7) /* (AB24) GPMC0_AD14.GPIO0_29 */ /* WiFi_WKUP_BT# */
+		>;
+	};
+
+	pinctrl_wifi_wkup_wlan: main-gpio0-30-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0078, PIN_INPUT, 7) /* (AC24) GPMC0_AD15.GPIO0_30 */ /* WiFi_WKUP_WLAN# */
+		>;
+	};
+
+	/* Verdin USB_1_ID */
+	pinctrl_usb0_id: main-gpio0-31-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x007c, PIN_INPUT, 7) /* (Y25) GPMC0_CLK.GPIO0_31 */ /* SODIMM 161 */
+		>;
+	};
+
+	/* Verdin USB_1_OC# */
+	pinctrl_usb1_oc: main-gpio0-32-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0084, PIN_INPUT, 7) /* (R25) GPMC0_ADVn_ALE.GPIO0_32 */ /* SODIMM 157 */
+		>;
+	};
+
+	/* Verdin I2S_2_D_IN as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_d_in_gpio: main-gpio0-33-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0088, PIN_INPUT, 7) /* (R24) GPMC0_OEn_REn.GPIO0_33 */ /* SODIMM 48 */
+		>;
+	};
+
+	/* Verdin I2S_2_D_OUT as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_d_out_gpio: main-gpio0-34-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x008c, PIN_INPUT, 7) /* (T25) GPMC0_WEn.GPIO0_34 */ /* SODIMM 46 */
+		>;
+	};
+
+	/* Verdin I2S_2_BCLK as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_bclk_gpio: main-gpio0-35-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0090, PIN_INPUT, 7) /* (U24) GPMC0_BE0n_CLE.GPIO0_35 */ /* SODIMM 42 */
+		>;
+	};
+
+	pinctrl_eth_int: main-gpio0-36-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0094, PIN_INPUT, 7) /* (T24) GPMC0_BE1n.GPIO0_36 */ /* ETH_INT# */
+		>;
+	};
+
+	/* Verdin I2S_2_SYNC as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_sync_gpio: main-gpio0-37-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0098, PIN_INPUT, 7) /* (AA24) GPMC0_WAIT0.GPIO0_37 */ /* SODIMM 44 */
+		>;
+	};
+
+	/* Verdin DSI_1_INT# */
+	pinctrl_dsi1_int: main-gpio0-38-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x009c, PIN_INPUT, 7) /* (AD24) GPMC0_WAIT1.GPIO0_38 */ /* SODIMM 17 */
+		>;
+	};
+
+	/* Verdin DSI_1_BLK_EN# */
+	pinctrl_dsi1_bkl_en: main-gpio0-39-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00a0, PIN_INPUT, 7) /* (P24) GPMC0_WPn.GPIO0_39 */ /* SODIMM 21 */
+		>;
+	};
+
+	/* Verdin USB_2_OC# */
+	pinctrl_usb2_oc: main-gpio0-41-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00a8, PIN_INPUT, 7) /* (T23) GPMC0_CSn0.GPIO0_41 */ /* SODIMM 187 */
+		>;
+	};
+
+	/* Verdin ETH_2_RGMII_INT# */
+	pinctrl_eth2_rgmii_int: main-gpio0-42-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00ac, PIN_INPUT, 7) /* (U23) GPMC0_CSn1.GPIO0_42 */ /* SODIMM 189 */
+		>;
+	};
+
+	/* Verdin SD_1_PWR_EN */
+	pinctrl_sd1_pwr_en: main-gpio0-47-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00c0, PIN_INPUT, 7) /* (AA23) VOUT0_DATA2.GPIO0_47 */ /* SODIMM 76 */
+		>;
+	};
+
+	/* Verdin GPIO_5 */
+	pinctrl_gpio_5: main-gpio0-49-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00c8, PIN_INPUT, 7) /* (AB23) VOUT0_DATA4.GPIO0_49 */ /* SODIMM 216 */
+		>;
+	};
+
+	/* Verdin GPIO_6 */
+	pinctrl_gpio_6: main-gpio0-50-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00cc, PIN_INPUT, 7) /* (AD23) VOUT0_DATA5.GPIO0_50 */ /* SODIMM 218 */
+		>;
+	};
+
+	/* Verdin GPIO_7 */
+	pinctrl_gpio_7: main-gpio0-51-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00d0, PIN_INPUT, 7) /* (AC23) VOUT0_DATA6.GPIO0_51 */ /* SODIMM 220 */
+		>;
+	};
+
+	/* Verdin GPIO_8 */
+	pinctrl_gpio_8: main-gpio0-52-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00d4, PIN_INPUT, 7) /* (AE23) VOUT0_DATA7.GPIO0_52 */ /* SODIMM 222 */
+		>;
+	};
+
+	/* Verdin MSP_36 as GPIO */
+	pinctrl_msp36_gpio: main-gpio0-57-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00e8, PIN_INPUT, 7) /* (AD21) VOUT0_DATA12.GPIO0_57 */ /* SODIMM 172 - WiFi_BT_WKUP_HOST#  */
+		>;
+	};
+
+	pinctrl_wifi_sd_int: main-gpio0-59-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00f0, PIN_INPUT, 7) /* (AA20) VOUT0_DATA14.GPIO0_59 */ /* WIFI_SD_INT */
+		>;
+	};
+
+	pinctrl_wifi_spi_cs: main-gpio0-60-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00f4, PIN_INPUT, 7) /* (Y20) VOUT0_DATA15.GPIO0_60 */ /* WIFI_SPI_CS# */
+		>;
+	};
+
+	/* Verdin PWM_3_DSI as GPIO */
+	pinctrl_pwm3_dsi_gpio: main-gpio1-16-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01b8, PIN_INPUT, 7) /* (E20) SPI0_CS1.GPIO1_16 */ /* SODIMM 19 */
+		>;
+	};
+
+	/* Verdin SD_1_CD# */
+	pinctrl_sd1_cd: main-gpio1-48-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0240, PIN_INPUT_PULLUP, 7) /* (D23) MMC1_SDCD.GPIO1_48 */ /* SODIMM 84 */
+		>;
+	};
+
+	/* Verdin MSP_29 as GPIO */
+	pinctl_msp29_gpio: main-gpio1-49-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0244, PIN_INPUT, 7) /* (D24) MMC1_SDWP.GPIO1_49 */ /* SODIMM 154 */
+		>;
+	};
+
+	/* Verdin USB_1_EN */
+	pinctrl_usb0_en: main-gpio1-50-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0254, PIN_INPUT, 7) /* (G22) USB0_DRVVBUS.GPIO1_50 */ /* SODIMM 155 */
+		>;
+	};
+
+	/* Verdin I2C_1 */
+	pinctrl_main_i2c0: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */ /* SODIMM 14 */
+			AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */ /* SODIMM 12 */
+		>;
+	};
+
+	/* Verdin I2C_2_DSI */
+	pinctrl_main_i2c1: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */ /* SODIMM 55 */
+			AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */ /* SODIMM 53 */
+		>;
+	};
+
+	/* Verdin I2C_4_CSI */
+	pinctrl_main_i2c3: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A23) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */
+			AM62PX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (C22) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */
+		>;
+	};
+
+	/* Verdin CAN_1 */
+	pinctrl_main_mcan0: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01dc, PIN_INPUT, 0)  /* (F20) MCAN0_RX */ /* SODIMM 22 */
+			AM62PX_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (B23) MCAN0_TX */ /* SODIMM 20 */
+		>;
+	};
+
+	/* Verdin MSP_3/MSP_8 as CAN */
+	pinctrl_main_mcan1: main-mcan1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00b4, PIN_INPUT, 5)  /* (U25) GPMC0_CSn3.MCAN1_RX */ /* SODIMM 92  */
+			AM62PX_IOPAD(0x00b0, PIN_OUTPUT, 5) /* (T22) GPMC0_CSn2.MCAN1_TX */ /* SODIMM 104 */
+		>;
+	};
+
+	/* Verdin SD_1 */
+	pinctrl_sdhci1: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x023c, PIN_INPUT,  0) /* (H20) MMC1_CMD  */ /* SODIMM 74 */
+			AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK  */ /* SODIMM 78 */
+			AM62PX_IOPAD(0x0230, PIN_INPUT,  0) /* (H21) MMC1_DAT0 */ /* SODIMM 80 */
+			AM62PX_IOPAD(0x022c, PIN_INPUT,  0) /* (H23) MMC1_DAT1 */ /* SODIMM 82 */
+			AM62PX_IOPAD(0x0228, PIN_INPUT,  0) /* (H22) MMC1_DAT2 */ /* SODIMM 70 */
+			AM62PX_IOPAD(0x0224, PIN_INPUT,  0) /* (H25) MMC1_DAT3 */ /* SODIMM 72 */
+		>;
+	};
+
+	/* On-module Wi-Fi on WB SKUs, module-specific SDIO otherwise */
+	pinctrl_sdhci2: main-mmc2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0120, PIN_INPUT,  0) /* (K24) MMC2_CMD  */ /* SODIMM 160, WiFi_SDIO_CMD   */
+			AM62PX_IOPAD(0x0118, PIN_OUTPUT, 0) /* (K21) MMC2_CLK  */ /* SODIMM 156, WiFi_SDIO_CLK   */
+			AM62PX_IOPAD(0x011C, PIN_INPUT,  0) /* () MMC2_CLKLB   */
+			AM62PX_IOPAD(0x0114, PIN_INPUT,  0) /* (K23) MMC2_DAT0 */ /* SODIMM 162, WiFi_SDIO_DATA0 */
+			AM62PX_IOPAD(0x0110, PIN_INPUT,  0) /* (K22) MMC2_DAT1 */ /* SODIMM 164, WiFi_SDIO_DATA1 */
+			AM62PX_IOPAD(0x010c, PIN_INPUT,  0) /* (L20) MMC2_DAT2 */ /* SODIMM 166, WiFi_SDIO_DATA2 */
+			AM62PX_IOPAD(0x0108, PIN_INPUT,  0) /* (L21) MMC2_DAT3 */ /* SODIMM 168, WiFi_SDIO_DATA3 */
+		>;
+	};
+
+	/* Verdin QSPI_1 */
+	pinctrl_ospi0: main-ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (P23) OSPI0_CLK  */ /* SODIMM 52 */
+			AM62PX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (M25) OSPI0_CSn0 */ /* SODIMM 54 */
+			AM62PX_IOPAD(0x0030, PIN_OUTPUT, 0) /* (L24) OSPI0_CSn1 */ /* SODIMM 64 */
+			AM62PX_IOPAD(0x000c, PIN_INPUT,  0) /* (L25) OSPI0_D0   */ /* SODIMM 56 */
+			AM62PX_IOPAD(0x0010, PIN_INPUT,  0) /* (N24) OSPI0_D1   */ /* SODIMM 58 */
+			AM62PX_IOPAD(0x0014, PIN_INPUT,  0) /* (N25) OSPI0_D2   */ /* SODIMM 60 */
+			AM62PX_IOPAD(0x0018, PIN_INPUT,  0) /* (M24) OSPI0_D3   */ /* SODIMM 62 */
+			AM62PX_IOPAD(0x0008, PIN_INPUT,  0) /* (P22) OSPI0_DQS  */ /* SODIMM 66 */
+		>;
+	};
+
+	/* Verdin ETH_1 RGMII (On-module PHY) */
+	pinctrl_rgmii1: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0    */ /* RGMII_RXD0   */
+			AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1    */ /* RGMII_RXD1   */
+			AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2    */ /* RGMII_RXD2   */
+			AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3    */ /* RGMII_RXD3   */
+			AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC    */ /* RGMII_RXC    */
+			AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */ /* RGMII_RX_CTL */
+			AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0    */ /* RGMII_TXD0   */
+			AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1    */ /* RGMII_TXD1   */
+			AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2    */ /* RGMII_TXD2   */
+			AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3    */ /* RGMII_TXD3   */
+			AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC    */ /* RGMII_TXC    */
+			AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */ /* RGMII_TX_CTL */
+		>;
+	};
+
+	/* Verdin ETH_2 RGMII */
+	pinctrl_rgmii2: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0    */ /* SODIMM 201 */
+			AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1    */ /* SODIMM 203 */
+			AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2    */ /* SODIMM 205 */
+			AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3    */ /* SODIMM 207 */
+			AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC    */ /* SODIMM 197 */
+			AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */ /* SODIMM 199 */
+			AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0    */ /* SODIMM 221 */
+			AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1    */ /* SODIMM 219 */
+			AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2    */ /* SODIMM 217 */
+			AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3    */ /* SODIMM 215 */
+			AM62PX_IOPAD(0x0168, PIN_INPUT, 0) /* (D16) RGMII2_TXC    */ /* SODIMM 213 */
+			AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */ /* SODIMM 211 */
+		>;
+	};
+
+	/* TPM SPI, Optional Module Specific SPI */
+	pinctrl_main_spi0: main-spi0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01bc, PIN_INPUT,  0) /* (B21) SPI0_CLK */ /* TPM_SPI_CLK  - SODIMM 148 */
+			AM62PX_IOPAD(0x01c0, PIN_OUTPUT, 0) /* (B20) SPI0_D0  */ /* TPM_SPI_MOSI - SODIMM 150 */
+			AM62PX_IOPAD(0x01c4, PIN_INPUT,  0) /* (C21) SPI0_D1  */ /* TPM_SPI_MISO - SODIMM 152 */
+			AM62PX_IOPAD(0x01b4, PIN_INPUT,  0) /* (D20) SPI0_CS0 */ /* TPM_SPI_CS */
+		>;
+	};
+
+	/* Verdin SPI_1 */
+	pinctrl_main_spi1: main-spi1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0020, PIN_INPUT,  1) /* (N22) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */
+			AM62PX_IOPAD(0x0024, PIN_OUTPUT, 1) /* (P21) OSPI0_D6.SPI1_D0  */ /* SODIMM 200 */
+			AM62PX_IOPAD(0x0028, PIN_INPUT,  1) /* (N20) OSPI0_D7.SPI1_D1  */ /* SODIMM 198 */
+		>;
+	};
+
+	/* Verdin SPI_1_CS */
+	pinctrl_main_spi1_cs0: main-spi1-cs0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x001c, PIN_OUTPUT, 1) /* (N21) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
+		>;
+	};
+
+	/* Verdin I2S_1 MCLK */
+	pinctrl_i2s1_mclk: main-system-audio-ext-reflock0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00c4, PIN_OUTPUT, 5) /* (Y23) VOUT0_DATA3.AUDIO_EXT_REFCLK0 */ /* SODIMM 38 */
+		>;
+	};
+
+	pinctrl_eth_clock: main-system-clkout0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01f0, PIN_OUTPUT_PULLUP, 5) /* (C25) EXT_REFCLK1.CLKOUT0 */ /* ETH_25MHz_CLK */
+		>;
+	};
+
+	pinctrl_pmic_extint: main-system-extint-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01f4, PIN_INPUT, 0) /* (C23) EXTINTn */ /* PMIC_EXTINT# */
+		>;
+	};
+
+	/* Verdin UART_3, used as the Linux console */
+	pinctrl_uart0: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x1c8, PIN_INPUT,  0) /* (A22) UART0_RXD */ /* SODIMM 147 */
+			AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ /* SODIMM 149 */
+		>;
+	};
+
+	/* Verdin UART_1 */
+	pinctrl_uart1: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01ac, PIN_INPUT,  2) /* (G23) MCASP0_AFSR.UART1_RXD  */ /* SODIMM 129 */
+			AM62PX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR.UART1_TXD */ /* SODIMM 131 */
+			AM62PX_IOPAD(0x0194, PIN_INPUT,  2) /* (D25) MCASP0_AXR3.UART1_CTSn */ /* SODIMM 135 */
+			AM62PX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (E25) MCASP0_AXR2.UART1_RTSn */ /* SODIMM 133 */
+		>;
+	};
+
+	/* Verdin MSP 41, 42, 44 and 45 as UART */
+	pinctrl_uart2: main-uart2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00b8, PIN_INPUT,  4) /* (AE24) VOUT0_DATA0.UART2_RXD */ /* SODIMM 192 */
+			AM62PX_IOPAD(0x00bc, PIN_OUTPUT, 4) /* (W23) VOUT0_DATA1.UART2_TXD  */ /* SODIMM 190 */
+			AM62PX_IOPAD(0x0104, PIN_INPUT,  4) /* (Y21) VOUT0_PCLK.UART2_CTSn  */ /* SODIMM 184 */
+			AM62PX_IOPAD(0x0100, PIN_OUTPUT, 4) /* (W20) VOUT0_VSYNC.UART2_RTSn */ /* SODIMM 186 */
+		>;
+	};
+
+	/* Bluetooth on WB SKUs */
+	pinctrl_uart6: main-uart6-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00d8, PIN_INPUT,  4) /* (AE22) VOUT0_DATA8.UART6_RXD   */ /* WiFi_UART_RXD */
+			AM62PX_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (AC22) VOUT0_DATA9.UART6_TXD   */ /* WiFi_UART_TXD */
+			AM62PX_IOPAD(0x00e4, PIN_INPUT,  4) /* (AE21) VOUT0_DATA11.UART6_CTSn */ /* WiFi_UART_CTS */
+			AM62PX_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (W22)  VOUT0_DATA10.UART6_RTSn */ /* WiFi_UART_RTS */
+		>;
+	};
+
+	/* Verdin USB_2_EN */
+	pinctrl_usb1: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (G21) USB1_DRVVBUS */ /* SODIMM 185 */
+		>;
+	};
+
+	/* Verdin I2S_1 */
+	pinctrl_mcasp0: mcasp0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01a4, PIN_INPUT, 0) /* (F24) MCASP0_ACLKX */ /* SODIMM 30 */
+			AM62PX_IOPAD(0x01a8, PIN_INPUT, 0) /* (F25) MCASP0_AFSX  */ /* SODIMM 32 */
+			AM62PX_IOPAD(0x01a0, PIN_INPUT, 0) /* (F23) MCASP0_AXR0  */ /* SODIMM 34 */
+			AM62PX_IOPAD(0x019c, PIN_INPUT, 0) /* (E24) MCASP0_AXR1  */ /* SODIMM 36 */
+		>;
+	};
+
+	/* Verdin I2S_2 */
+	pinctrl_mcasp1: mcasp1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24)  GPMC0_BE0n_CLE.MCASP1_ACLKX */ /* SODIMM 42 */
+			AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX     */ /* SODIMM 44 */
+			AM62PX_IOPAD(0x008c, PIN_INPUT, 2) /* (T25)  GPMC0_WEn.MCASP1_AXR0       */ /* SODIMM 46 */
+			AM62PX_IOPAD(0x0088, PIN_INPUT, 2) /* (R24)  GPMC0_OEn_REn.MCASP1_AXR1   */ /* SODIMM 48 */
+		>;
+	};
+
+	/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+	pinctrl_mdio: mdio0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC  */ /* SODIMM 193 */
+			AM62PX_IOPAD(0x015c, PIN_INPUT,  0) /* (F16) MDIO0_MDIO */ /* SODIMM 191 */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	/* Verdin GPIO_1 */
+	pinctrl_gpio_1: mcu-gpio0-1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0004, PIN_INPUT, 7) /* (E10) MCU_SPI0_CS1.MCU_GPIO0_1 */ /* SODIMM 206 */
+		>;
+	};
+
+	/* Verdin GPIO_2 */
+	pinctrl_gpio_2: mcu-gpio0-2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0008, PIN_INPUT, 7) /* (C10) MCU_SPI0_CLK.MCU_GPIO0_2 */ /* SODIMM 208 */
+		>;
+	};
+
+	/* Verdin GPIO_3 */
+	pinctrl_gpio_3: mcu-gpio0-3-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x000c, PIN_INPUT, 7) /* (B11) MCU_SPI0_D0.MCU_GPIO0_3 */ /* SODIMM 210 */
+		>;
+	};
+
+	/* Verdin GPIO_4 */
+	pinctrl_gpio_4: mcu-gpio0-4-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0010, PIN_INPUT, 7) /* (D10) MCU_SPI0_D1.MCU_GPIO0_4 */ /* SODIMM 212 */
+		>;
+	};
+
+	/* Verdin I2C_3_HDMI */
+	pinctrl_mcu_i2c0: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (E11) MCU_I2C0_SCL */ /* SODIMM 59 */
+			AM62PX_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D11) MCU_I2C0_SDA */ /* SODIMM 57 */
+		>;
+	};
+
+	/* Verdin CAN_2 */
+	pinctrl_mcu_mcan0: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0038, PIN_INPUT,  0) /* (D6) MCU_MCAN0_RX */ /* SODIMM 22 */
+			AM62PX_MCU_IOPAD(0x0034, PIN_OUTPUT, 0) /* (E8) MCU_MCAN0_TX */ /* SODIMM 20 */
+		>;
+	};
+
+	/* Verdin MSP_13/MSP_18 as CAN */
+	pinctrl_mcu_mcan1: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0040, PIN_INPUT,  0) /* (E7) MCU_MCAN1_RX */ /* SODIMM 116 */
+			AM62PX_MCU_IOPAD(0x003c, PIN_OUTPUT, 0) /* (F8) MCU_MCAN1_TX */ /* SODIMM 128 */
+		>;
+	};
+
+	/* Verdin UART_4 */
+	pinctrl_mcu_uart0: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0014, PIN_INPUT,  0) /* (B6) MCU_UART0_RXD */ /* SODIMM 151 */
+			AM62PX_MCU_IOPAD(0x0018, PIN_OUTPUT, 0) /* (C8) MCU_UART0_TXD */ /* SODIMM 153 */
+		>;
+	};
+
+	/* On-module I2C - PMIC_I2C */
+	pinctrl_wkup_i2c0: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x004c, PIN_INPUT, 0) /* (A13) WKUP_I2C0_SCL */ /* PMIC_I2C_SCL */
+			AM62PX_MCU_IOPAD(0x0050, PIN_INPUT, 0) /* (C11) WKUP_I2C0_SDA */ /* PMIC_I2C_SDA */
+		>;
+	};
+
+	/* Verdin CSI_1_MCLK */
+	pinctrl_wkup_clkout0: wkup-system-clkout0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (F13) WKUP_CLKOUT0 */ /* SODIMM 91 */
+		>;
+	};
+
+	/* Verdin UART_2 */
+	pinctrl_wkup_uart0: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x002c, PIN_INPUT,  0) /* (C7) WKUP_UART0_CTSn */ /* SODIMM 143 */
+			AM62PX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ /* SODIMM 141 */
+			AM62PX_MCU_IOPAD(0x0024, PIN_INPUT,  0) /* (D8) WKUP_UART0_RXD  */ /* SODIMM 137 */
+			AM62PX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD  */ /* SODIMM 139 */
+		>;
+	};
+};
+
+/* Verdin I2S_1_MCLK */
+&audio_refclk0 {
+	assigned-clock-rates = <25000000>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>;
+	status = "disabled";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio>, <&pinctrl_eth_clock>;
+	assigned-clocks = <&k3_clks 157 36>;
+	assigned-clock-parents = <&k3_clks 157 38>;
+	assigned-clock-rates = <25000000>;
+	status = "disabled";
+
+	som_eth_phy: ethernet-phy@0 {
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	phy-handle = <&som_eth_phy>;
+	phy-mode = "rgmii-id";
+	status = "disabled";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+	status = "disabled";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epwm0_b>;
+	status = "disabled";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epwm2_a>, <&pinctrl_epwm2_b>;
+	status = "disabled";
+};
+
+&main0_alert {
+	temperature = <95000>;
+};
+
+&main0_crit {
+	temperature = <105000>;
+};
+
+&main1_alert {
+	temperature = <95000>;
+};
+
+&main1_crit {
+	temperature = <105000>;
+};
+
+&main2_alert {
+	temperature = <95000>;
+};
+
+&main2_crit {
+	temperature = <105000>;
+};
+
+&main_gpio0 {
+	gpio-line-names =
+		"SODIMM_52",
+		"SODIMM_252",
+		"SODIMM_66",
+		"SODIMM_56",
+		"SODIMM_58",
+		"SODIMM_60",
+		"SODIMM_62",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"SODIMM_54",
+		"SODIMM_64",
+		"SODIMM_174",
+		"SODIMM_244",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"PMIC_SD_VSEL",
+		"",
+		"",
+		"",
+		"TPM_EXTINT#",
+		"",
+		"",
+		"",
+		"WiFi_WKUP_BT#",
+		"WiFi_WKUP_WLAN#", /* 30 */
+		"SODIMM_161",
+		"SODIMM_157",
+		"",
+		"",
+		"",
+		"ETH_INT#",
+		"",
+		"SODIMM_17",
+		"SODIMM_21",
+		"", /* 40 */
+		"SODIMM_187",
+		"SODIMM_189",
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_76",
+		"",
+		"SODIMM_216",
+		"SODIMM_218", /* 50 */
+		"SODIMM_220",
+		"SODIMM_222",
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_172",
+		"",
+		"WIFI_SD_INT",
+		"WIFI_SPI_CS#", /* 60 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 70 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 80 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 90 */
+		"";
+
+	verdin_pcie_1_reset_hog: pcie-1-reset-hog {
+		gpio-hog;
+		/* Verdin PCIE_1_RESET# (SODIMM 244) */
+		gpios = <14 GPIO_ACTIVE_LOW>;
+		line-name = "PCIE_1_RESET#";
+		output-low;
+		status = "disabled";
+	};
+};
+
+&main_gpio1 {
+	gpio-line-names =
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 30 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 40 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_84",
+		"SODIMM_154",
+		"SODIMM_155", /* 50 */
+		"";
+};
+
+/* Verdin I2C_1 */
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_i2c0>;
+	status = "disabled";
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_i2c1>;
+	status = "disabled";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_i2c3>;
+	status = "disabled";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_mcan0>;
+	status = "disabled";
+};
+
+/* TPM SPI, optional SPI on module specific pins */
+&main_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_spi0>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_extint>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_spi1>, <&pinctrl_main_spi1_cs0>;
+	ti,pindir-d0-out-d1-in;
+	status = "disabled";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "disabled";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcasp0>;
+	op-mode = <0>; /* I2S mode */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 2 0 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tdm-slots = <2>;
+	rx-num-evt = <0>;
+	tx-num-evt = <0>;
+	#sound-dai-cells = <0>;
+	status = "disabled";
+};
+
+/* Verdin I2S_2 */
+&mcasp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcasp1>;
+	op-mode = <0>; /* I2S mode */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 2 0 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tdm-slots = <2>;
+	rx-num-evt = <0>;
+	tx-num-evt = <0>;
+	#sound-dai-cells = <0>;
+	status = "disabled";
+};
+
+&mcu_gpio0 {
+	gpio-line-names =
+		"",
+		"SODIMM_206",
+		"SODIMM_208",
+		"SODIMM_210",
+		"SODIMM_212",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"";
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_i2c0>;
+	status = "disabled";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_mcan0>;
+	status = "disabled";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_uart0>;
+	status = "disabled";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ospi0>;
+	status = "disabled";
+};
+
+/* On-module eMMC */
+&sdhci0 {
+	no-mmc-hs400;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1>, <&pinctrl_sd1_cd>;
+	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	vqmmc-supply = <&reg_sd1_vqmmc>;
+	ti,fails-without-test-cd;
+	status = "disabled";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	ti,vbus-divider;
+	status = "disabled";
+};
+
+&usb0 {
+	adp-disable;
+	usb-role-switch;
+	status = "disabled";
+
+	port {
+		usb0_ep: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	ti,vbus-divider;
+	status = "disabled";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "disabled";
+};
+
+/* On-module I2C - PMIC_I2C */
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wkup_i2c0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	som_gpio_expander: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "SODIMM_256";
+	};
+
+	pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic_extint>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+
+		buck1-supply = <&reg_vsodimm>;
+		buck2-supply = <&reg_vsodimm>;
+		buck3-supply = <&reg_vsodimm>;
+		ldo1-supply = <&reg_3v3>;
+		ldo2-supply = <&reg_1v8>;
+		ldo3-supply = <&reg_3v3>;
+		ldo4-supply = <&reg_3v3>;
+		system-power-controller;
+		ti,power-button;
+
+		regulators {
+			reg_3v3: buck1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3 (PMIC BUCK1)";
+			};
+
+			reg_1v8: buck2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8 (PMIC BUCK2)"; /* On-module and SODIMM 214 */
+			};
+
+			buck3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "+VDD_DDR (PMIC BUCK3)";
+			};
+
+			reg_sd_3v3_1v8: ldo1 {
+				regulator-allow-bypass;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3_1.8_SD (PMIC LDO1)";
+			};
+
+			ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "+V_PMIC_LDO2 (PMIC LDO4)"; // +VDDR_CORE
+			};
+
+			ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8A (PMIC LDO3)";
+			};
+
+			ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <2500000>;
+				regulator-name = "+V2.5_ETH (PMIC LDO4)";
+			};
+		};
+	};
+
+	som_rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	som_adc: adc@49 {
+		compatible = "ti,tla2024";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#io-channel-cells = <1>;
+
+		/* Verdin (ADC_4 - ADC_3) */
+		channel@0 {
+			reg = <0>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin (ADC_4 - ADC_1) */
+		channel@1 {
+			reg = <1>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin (ADC_3 - ADC_1) */
+		channel@2 {
+			reg = <2>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin (ADC_2 - ADC_1) */
+		channel@3 {
+			reg = <3>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin ADC_4 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin ADC_3 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin ADC_2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin ADC_1 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+	};
+
+	som_eeprom: eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wkup_uart0>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+#include "k3-am62p-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
index 75a15c368c11..e2c01328eb29 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
@@ -44,6 +44,33 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	system-idle-states {
+		system_partial_io: system-partial-io {
+			compatible = "system-idle-state";
+			idle-state-name = "off-wake";
+		};
+
+		system_io_ddr: system-io-ddr {
+			compatible = "system-idle-state";
+			idle-state-name = "mem-deep";
+		};
+
+		system_deep_sleep: system-deep-sleep {
+			compatible = "system-idle-state";
+			idle-state-name = "mem";
+		};
+
+		system_mcu_only: system-mcu-only {
+			compatible = "system-idle-state";
+			idle-state-name = "mem-mcu-active";
+		};
+
+		system_standby: system-standby {
+			compatible = "system-idle-state";
+			idle-state-name = "standby";
+		};
+	};
+
 	cbass_main: bus@f0000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -59,7 +86,7 @@
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
 			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
 			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
-			 <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
+			 <0x00 0x0fd80000 0x00 0x0fd80000 0x00 0x00080000>, /* GPU */
 			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
 			 <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
 			 <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 7f3dc39e12bc..ef719c6334fc 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -19,6 +19,7 @@
 
 	aliases {
 		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
 		serial2 = &main_uart0;
 		serial3 = &main_uart1;
 		mmc0 = &sdhci0;
@@ -43,11 +44,23 @@
 		bootph-pre-ram;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
+		wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0xf00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			no-map;
@@ -57,12 +70,6 @@
 			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
 			no-map;
 		};
-
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9c900000 0x00 0x01e00000>;
-			no-map;
-		};
 	};
 
 	vmain_pd: regulator-0 {
@@ -114,6 +121,28 @@
 		bootph-all;
 	};
 
+	vcc_3v3_main: regulator-4 {
+		/* output of LM5141-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_main";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-5 {
+		/* output of TPS222965DSGT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -173,6 +202,14 @@
 	};
 };
 
+&cpsw_mac_syscon {
+	bootph-all;
+};
+
+&phy_gmii_sel {
+	bootph-all;
+};
+
 &main_gpio0 {
 	bootph-all;
 };
@@ -226,6 +263,7 @@
 			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
 			AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	main_mmc1_pins_default: main-mmc1-default-pins {
@@ -355,6 +393,32 @@
 			AM62PX_IOPAD(0x0124, PIN_INPUT, 7) /* (J25) MMC2_SDCD.GPIO0_71 */
 		>;
 	};
+
+	main_ecap1_pins_default: main-ecap1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x019c, PIN_OUTPUT, 2) /* (E24) MCASP0_AXR1.ECAP1_IN_APWM_OUT */
+		>;
+	};
+
+	main_ecap2_pins_default: main-ecap2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01a4, PIN_OUTPUT, 2) /* (F24) MCASP0_ACLKX.ECAP2_IN_APWM_OUT */
+		>;
+	};
+
+	main_epwm0_pins_default: main-epwm0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01b4, PIN_OUTPUT, 2) /* (D20) SPI0_CS0.EHRPWM0_A */
+			AM62PX_IOPAD(0x01b8, PIN_OUTPUT, 2) /* (E20) SPI0_CS1.EHRPWM0_B */
+		>;
+	};
+
+	main_epwm1_pins_default: main-epwm1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01bc, PIN_OUTPUT, 2) /* (B21) SPI0_CLK.EHRPWM1_A */
+			AM62PX_IOPAD(0x01c0, PIN_OUTPUT, 2) /* (B20) SPI0_D0.EHRPWM1_B */
+		>;
+	};
 };
 
 &main_i2c0 {
@@ -453,8 +517,8 @@
 
 &sdhci0 {
 	status = "okay";
+	non-removable;
 	ti,driver-strength-ohm = <50>;
-	disable-wp;
 	bootph-all;
 };
 
@@ -477,13 +541,14 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy0>;
 	status = "okay";
+	bootph-all;
 };
 
 &cpsw_port2 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy1>;
 	status = "okay";
 };
@@ -495,6 +560,7 @@
 
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
@@ -519,6 +585,7 @@
 };
 
 &usb0 {
+	bootph-all;
 	usb-role-switch;
 
 	port {
@@ -528,6 +595,10 @@
 	};
 };
 
+&usb0_phy_ctrl {
+	bootph-all;
+};
+
 &usb1 {
 	dr_mode = "host";
 	pinctrl-names = "default";
@@ -620,20 +691,6 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	mbox_mcu_r5_0: mbox-mcu-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
 &main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -659,12 +716,52 @@
 		>;
 		bootph-all;
 	};
+
+	mcu_mcan0_tx_pins_default: mcu-mcan0-tx-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan0_rx_pins_default: mcu-mcan0-rx-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */
+		>;
+	};
+
+	mcu_mcan0_rx_pins_wakeup: mcu-mcan0-rx-wakeup-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x038, PIN_INPUT | PIN_WKUP_EN, 0) /* (B3) MCU_MCAN0_RX */
+		>;
+	};
+
+	mcu_mcan1_tx_pins_default: mcu-mcan1-tx-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x03c, PIN_OUTPUT, 0) /* (E5) MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_mcan1_rx_pins_default: mcu-mcan1-rx-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (D4) MCU_MCAN1_RX */
+		>;
+	};
+
+	mcu_mcan1_rx_pins_wakeup: mcu-mcan1-rx-wakeup-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x040, PIN_INPUT | PIN_WKUP_EN, 0) /* (D4) MCU_MCAN1_RX */
+		>;
+	};
 };
 
 &wkup_uart0 {
 	/* WKUP UART0 is used by DM firmware */
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_uart0_pins_default>;
+	wakeup-source = <&system_io_ddr>,
+			<&system_deep_sleep>,
+			<&system_mcu_only>,
+			<&system_standby>;
 	status = "reserved";
 	bootph-all;
 };
@@ -677,3 +774,62 @@
 &mcu_gpio_intr {
 	status = "reserved";
 };
+
+&ecap1 {
+	/* P36 of J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap1_pins_default>;
+	status = "okay";
+};
+
+&ecap2 {
+	/* P11 of J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap2_pins_default>;
+	status = "okay";
+};
+
+&epwm0 {
+	/* P24/P26 of J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_epwm0_pins_default>;
+	status = "okay";
+};
+
+&epwm1 {
+	/* P23/P19 of J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_epwm1_pins_default>;
+	status = "okay";
+};
+
+&mcu_mcan0 {
+	pinctrl-names = "default", "wakeup";
+	pinctrl-0 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_default>;
+	pinctrl-1 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_wakeup>;
+	wakeup-source = <&system_partial_io>,
+			<&system_io_ddr>,
+			<&system_deep_sleep>,
+			<&system_mcu_only>,
+			<&system_standby>;
+};
+
+&mcu_mcan1 {
+	pinctrl-names = "default", "wakeup";
+	pinctrl-0 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_default>;
+	pinctrl-1 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_wakeup>;
+	wakeup-source = <&system_partial_io>,
+			<&system_io_ddr>,
+			<&system_deep_sleep>,
+			<&system_mcu_only>,
+			<&system_standby>;
+};
+
+&mcu_uart0 {
+	wakeup-source = <&system_io_ddr>,
+			<&system_deep_sleep>,
+			<&system_mcu_only>,
+			<&system_standby>;
+};
+
+#include "k3-am62p-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
new file mode 100644
index 000000000000..4bb92fde6ab8
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Variscite Symphony carrier board for VAR-SOM-AM62P
+ *
+ * Link: https://www.variscite.it/product/single-board-computers/symphony-board/
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5-var-som.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-AM62P on Symphony-Board";
+	compatible = "variscite,var-som-am62p-symphony", "variscite,var-som-am62p", "ti,am62p5";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		serial0 = &main_uart0;
+		serial2 = &main_uart2;
+		serial5 = &main_uart5;
+		serial6 = &main_uart6;
+		spi5 = &main_spi2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk_ov5640_fixed: clock-24000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+		};
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			label = "Heartbeat";
+			linux,default-trigger = "heartbeat";
+			gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_3v3>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_3v3>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&reg_3v3>;
+		regulator-always-on;
+	};
+
+	reg_sdhc1_vmmc: regulator-sdhc1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_SD";
+		vin-supply = <&reg_sdhc1_vmmc_int>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	reg_sdhc1_vmmc_int: regulator-sdhc1-int {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_SD_INT";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd1_vmmc>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&main_gpio0 53 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "+V3.3_SD_VQMMC";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd1_vqmmc>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpios = <&main_gpio0 56 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		bootph-all;
+	};
+
+	reg_ov5640_buf_en: regulator-camera-buf-en {
+		compatible = "regulator-fixed";
+		regulator-name = "ov5640_buf_en";
+		gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	transceiver1: can-phy {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_extcon>;
+		label = "USB-C";
+		id-gpios = <&main_gpio1 12 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+
+		port {
+			usb_con_hs: endpoint {
+				remote-endpoint = <&typec_hs>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>,
+		    <&pinctrl_rgmii2>;
+	status = "okay";
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio1>;
+	status = "okay";
+
+	cpsw3g_phy1: ethernet-phy@5 {
+		compatible = "ethernet-phy-id0283.bc30";
+		reg = <5>;
+		reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <100000>;
+	};
+};
+
+&cpsw_port2 {
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the Symphony PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&cpsw3g_phy1>;
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&main_i2c0{
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+		AVDD-supply = <&reg_2p8v>;
+		DOVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_1p5v>;
+		powerdown-gpios = <&main_gpio0 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	/* GPIO expander */
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		status = "okay";
+
+		usb3-sel-hog {
+			gpio-hog;
+			gpios = <4 0>;
+			output-low;
+			line-name = "usb3_sel";
+		};
+
+		eth-som-vselect-hog {
+			gpio-hog;
+			gpios = <6 0>;
+			output-low;
+			line-name = "eth-vselect";
+		};
+
+		eth-mdio-enable-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			output-high;
+			line-name = "eth-mdio-enable";
+		};
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcan0>;
+	phys = <&transceiver1>;
+	status = "okay";
+};
+
+&main_pmx0 {
+	pinctrl_extcon: main-extcon-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01a8, PIN_INPUT, 7) /* (F25) MCASP0_AFSX.GPIO1_12 */
+		>;
+	};
+
+	pinctrl_i2c0: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */
+			AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */
+		>;
+	};
+
+	pinctrl_i2c1: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */
+			AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */
+		>;
+		bootph-all;
+	};
+
+	pinctrl_mcan0: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01dc, PIN_INPUT, 0) /* (F20) MCAN0_RX */
+			AM62PX_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (B23) MCAN0_TX */
+		>;
+	};
+
+	pinctrl_mmc1: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x023c, PIN_INPUT, 0) /* (H20) MMC1_CMD */
+			AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK */
+			AM62PX_IOPAD(0x0230, PIN_INPUT, 0) /* (H21) MMC1_DAT0 */
+			AM62PX_IOPAD(0x022c, PIN_INPUT, 0) /* (H23) MMC1_DAT1 */
+			AM62PX_IOPAD(0x0228, PIN_INPUT, 0) /* (H22) MMC1_DAT2 */
+			AM62PX_IOPAD(0x0224, PIN_INPUT, 0) /* (H25) MMC1_DAT3 */
+			AM62PX_IOPAD(0x0240, PIN_INPUT, 0) /* (D23) MMC1_SDCD */
+		>;
+		bootph-all;
+	};
+
+	pinctrl_rgmii2: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0 */
+			AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1 */
+			AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2 */
+			AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3 */
+			AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC */
+			AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */
+			AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0 */
+			AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1 */
+			AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2 */
+			AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3 */
+			AM62PX_IOPAD(0x0168, PIN_INPUT_PULLDOWN, 0) /* (D16) RGMII2_TXC */
+			AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */
+		>;
+	};
+
+	pinctrl_spi2: main-spi2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01b0, PIN_INPUT, 1) /* (G20) MCASP0_ACLKR.SPI2_CLK */
+			AM62PX_IOPAD(0x0194, PIN_OUTPUT, 1) /* (D25) MCASP0_AXR3.SPI2_D0 */
+			AM62PX_IOPAD(0x0198, PIN_INPUT, 1) /* (E25) MCASP0_AXR2.SPI2_D1 */
+			AM62PX_IOPAD(0x01ac, PIN_OUTPUT, 7) /* (G23) MCASP0_AFSR.GPIO1_13 */
+		>;
+	};
+
+	pinctrl_uart0: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x1c8, PIN_INPUT, 0)	/* (A22) UART0_RXD */
+			AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0)	/* (B22) UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	pinctrl_uart2: main-uart2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x005c, PIN_INPUT_PULLUP, 2) /* (AC25) GPMC0_AD8.UART2_RXD */
+			AM62PX_IOPAD(0x0060, PIN_OUTPUT, 2) /* (AB25) GPMC0_AD9.UART2_TXD */
+		>;
+	};
+
+	pinctrl_uart6: main-uart6-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x009c, PIN_INPUT_PULLUP, 3) /* (AD24) GPMC0_WAIT1.UART6_RXD */
+			AM62PX_IOPAD(0x0244, PIN_OUTPUT, 1) /* (D24) MMC1_SDWP.UART6_TXD */
+		>;
+	};
+
+	pinctrl_usb1: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (G21) USB1_DRVVBUS */
+		>;
+	};
+
+	pinctrl_ov5640: main-ov5640-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0028, PIN_OUTPUT, 7) /* (N20) OSPI0_D7.GPIO0_10 */
+			AM62PX_IOPAD(0x0054, PIN_OUTPUT, 7) /* (V24) GPMC0_AD6.GPIO0_21 */
+			AM62PX_IOPAD(0x0058, PIN_OUTPUT, 7) /* (W25) GPMC0_AD7.GPIO0_22 */
+		>;
+	};
+
+	pinctrl_pca9534: main-pca9534-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01f0, PIN_INPUT, 7) /* (C25) EXT_REFCLK1.GPIO1_30 */
+		>;
+	};
+
+	pinctrl_sd1_vmmc: main-sd1-vmmc-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AC24) GPMC0_AD15.GPIO0_30 */
+			AM62PX_IOPAD(0x00d8, PIN_OUTPUT, 7) /* (AE22) VOUT0_DATA8.GPIO0_53 */
+		>;
+		bootph-all;
+	};
+
+	pinctrl_sd1_vqmmc: main-sd1-vqmmc-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00e4, PIN_OUTPUT, 7) /* (AE21) VOUT0_DATA11.GPIO0_56 */
+		>;
+		bootph-all;
+	};
+};
+
+&main_spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	ti,pindir-d0-out-d1-in;
+	cs-gpios = <&main_gpio1 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&main_uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&main_uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&sdhci1 {
+	/* SD Card */
+	vmmc-supply = <&reg_sdhc1_vmmc>;
+	vqmmc-supply = <&reg_sdhc1_vqmmc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc1>;
+	disable-wp;
+	bootph-all;
+	status="okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&usb0 {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	status = "okay";
+};
+
+&usbss0 {
+	status = "okay";
+};
+
+&usbss1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
new file mode 100644
index 000000000000..fc5a3942cde0
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common dtsi for Variscite VAR-SOM-AM62P
+ *
+ * Link: https://www.variscite.com/product/system-on-module-som/cortex-a53-krait/var-som-am62p-ti-sitara-am62px/
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "k3-am62p5.dtsi"
+
+/ {
+	compatible = "variscite,var-som-am62p", "ti,am62p5";
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <10000>;
+		reset-gpios = <&main_gpio0 54 GPIO_ACTIVE_LOW>,	/* WIFI_PWR_EN */
+			      <&main_gpio0 59 GPIO_ACTIVE_LOW>;	/* WIFI_EN */
+	};
+
+	mmc_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mmc_pwrseq>;
+		reset-gpios = <&main_gpio0 49 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@80000000 {
+		/* 8G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000001 0x80000000>;
+		device_type = "memory";
+		bootph-pre-ram;
+	};
+
+	opp-table {
+		/* Add 1.4GHz OPP for am62p5-sk board. Requires VDD_CORE at 0v85 */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rtos_ipc_memory_region: rtos-ipc-memory@9b500000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b500000 0x00 0x00300000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x00100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x01e00000>;
+			no-map;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			no-map;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "On-module +V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "On-module +V1.8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3v3_phy: regulator-3v3-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "On-module +V3.3_PHY";
+		gpios = <&main_gpio0 45 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "wm8904-audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"IN1L", "Microphone Jack",
+			"IN1R", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&wm8904>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+	};
+};
+
+&audio_refclk1 {
+	assigned-clock-rates = <100000000>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>;
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio1>;
+	status = "okay";
+
+	cpsw3g_phy0: ethernet-phy@4 {
+		compatible = "ethernet-phy-id0283.bc30";
+		reg = <4>;
+		reset-gpios = <&main_gpio0 46 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <100000>;
+	};
+};
+
+&cpsw_port1 {
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&cpsw3g_phy0>;
+	status = "okay";
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_refclk1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_1v8>;
+		CPVDD-supply = <&reg_1v8>;
+		DBVDD-supply = <&reg_3v3>;
+		DCVDD-supply = <&reg_1v8>;
+		MICVDD-supply = <&reg_1v8>;
+	};
+};
+
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&main_pmx0 {
+	pinctrl_mmc_pwrseq: main-emmc-pwrseq-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00c8, PIN_OUTPUT, 7) /* (AB23) VOUT0_DATA4.GPIO0_49 */
+		>;
+	};
+
+	pinctrl_i2c2: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */
+			AM62PX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	pinctrl_i2c3: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A23) UART0_CTSn.I2C3_SCL */
+			AM62PX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (C22) UART0_RTSn.I2C3_SDA */
+		>;
+	};
+
+	pinctrl_mcasp1: main-mcasp1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
+			AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62PX_IOPAD(0x008c, PIN_OUTPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */
+			AM62PX_IOPAD(0x0084, PIN_INPUT, 2) /* (R25) GPMC0_ADVn_ALE.MCASP1_AXR2 */
+			AM62PX_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (P24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
+		>;
+	};
+
+	pinctrl_mdio1: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
+			AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
+		>;
+	};
+
+	pinctrl_mmc2: main-mmc2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0120, PIN_INPUT_PULLUP, 0) /* (K24) MMC2_CMD */
+			AM62PX_IOPAD(0x0118, PIN_INPUT_PULLDOWN, 0) /* (K21) MMC2_CLK */
+			AM62PX_IOPAD(0x011c, PIN_INPUT_PULLUP, 0) /* () MMC2_CLKLB */
+			AM62PX_IOPAD(0x0114, PIN_INPUT_PULLUP, 0) /* (K23) MMC2_DAT0 */
+			AM62PX_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (K22) MMC2_DAT1 */
+			AM62PX_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (L20) MMC2_DAT2 */
+			AM62PX_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (L21) MMC2_DAT3 */
+		>;
+	};
+
+	pinctrl_rgmii1: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0 */
+			AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1 */
+			AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2 */
+			AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3 */
+			AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC */
+			AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */
+			AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0 */
+			AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1 */
+			AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2 */
+			AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3 */
+			AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC */
+			AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */
+		>;
+		bootph-all;
+	};
+
+	pinctrl_spi0: main-spi0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (B21) SPI0_CLK */
+			AM62PX_IOPAD(0x01b4, PIN_OUTPUT, 0) /* (D20) SPI0_CS0 */
+			AM62PX_IOPAD(0x01c0, PIN_OUTPUT, 0) /* (B20) SPI0_D0 */
+			AM62PX_IOPAD(0x01c4, PIN_INPUT, 0) /* (C21) SPI0_D1 */
+		>;
+	};
+
+	pinctrl_uart5: main-uart5-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00ec, PIN_INPUT, 4) /* (AC21) VOUT0_DATA13.UART5_CTSn */
+			AM62PX_IOPAD(0x00e8, PIN_OUTPUT, 4) /* (AD21) VOUT0_DATA12.UART5_RTSn */
+			AM62PX_IOPAD(0x00d0, PIN_INPUT, 4) /* (AC23) VOUT0_DATA6.UART5_RXD */
+			AM62PX_IOPAD(0x00d4, PIN_OUTPUT, 4) /* (AE23) VOUT0_DATA7.UART5_TXD */
+		>;
+	};
+
+	pinctrl_bt: main-btgrp-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00f4, PIN_OUTPUT, 7) /* (Y20) VOUT0_DATA15.GPIO0_60 (BT_EN) */
+		>;
+	};
+
+	pinctrl_restouch: main-restouch-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00c4, PIN_INPUT_PULLUP, 7) /* (Y23) VOUT0_DATA3.GPIO0_48 */
+		>;
+	};
+
+	pinctrl_wifi: main-wifi-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00dc, PIN_OUTPUT, 7) /* (AC22) VOUT0_DATA9.GPIO0_54 - WIFI_PWR_EN - */
+			AM62PX_IOPAD(0x00f0, PIN_OUTPUT, 7) /* (AA20) VOUT0_DATA14.GPIO0_59 - WIFI_EN - */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	pinctrl_wkup_clkout0: wkup-clkout0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (F13) WKUP_CLKOUT0 */
+		>;
+	};
+};
+
+&main_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+
+	/* Resistive touch controller */
+	ads7846: touchscreen@0 {
+		compatible = "ti,ads7846";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_restouch>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <48 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <1500000>;
+		pendown-gpio = <&main_gpio0 48 GPIO_ACTIVE_LOW>;
+		ti,x-min = /bits/ 16 <125>;
+		ti,x-max = /bits/ 16 <4008>;
+		ti,y-min = /bits/ 16 <282>;
+		ti,y-max = /bits/ 16 <3864>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,debounce-max = /bits/ 16 <10>;
+		ti,debounce-tol = /bits/ 16 <3>;
+		ti,debounce-rep = /bits/ 16 <1>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+		ti,keep-vref-on;
+		wakeup-source;
+	};
+};
+
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>, <&pinctrl_bt>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&mcasp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcasp1>;
+	op-mode = <0>;  /* MCASP_IIS_MODE */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 0 2 0
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+	tdm-slots = <2>;
+	tx-num-evt = <0>;
+	rx-num-evt = <0>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&sdhci0 {
+	/* On-module eMMC */
+	ti,driver-strength-ohm = <50>;
+	mmc-pwrseq = <&mmc_pwrseq>;
+	bootph-all;
+	status = "okay";
+};
+
+&sdhci2 {
+	/* On-module WiFi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc2>, <&pinctrl_wifi>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	ti,fails-without-test-cd;
+	status = "okay";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+};
+
+&usbss1 {
+	ti,vbus-divider;
+};
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_gpio_intr {
+	status = "reserved";
+};
+
+&wkup_rtc0 {
+	status = "disabled";
+};
+
+&wkup_rti0 {
+	/* WKUP RTI0 is used by DM firmware */
+	status = "reserved";
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by DM firmware */
+	status = "reserved";
+};
+
+&main_uart1 {
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+};
+
+#include "k3-am62p-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dahlia.dts
new file mode 100644
index 000000000000..1790e572eaa0
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dahlia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-nonwifi.dtsi"
+#include "k3-am62p-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P on Dahlia Board";
+	compatible = "toradex,verdin-am62p-nonwifi-dahlia",
+		     "toradex,verdin-am62p-nonwifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dev.dts
new file mode 100644
index 000000000000..5794f650f751
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-dev.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-nonwifi.dtsi"
+#include "k3-am62p-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P on Verdin Development Board";
+	compatible = "toradex,verdin-am62p-nonwifi-dev",
+		     "toradex,verdin-am62p-nonwifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-ivy.dts b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-ivy.dts
new file mode 100644
index 000000000000..a777513f26ec
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-ivy.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/ivy-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-nonwifi.dtsi"
+#include "k3-am62p-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P on Ivy Board";
+	compatible = "toradex,verdin-am62p-nonwifi-ivy",
+		     "toradex,verdin-am62p-nonwifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000000..52823874eadc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-nonwifi.dtsi"
+#include "k3-am62p-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P on Mallow Board";
+	compatible = "toradex,verdin-am62p-nonwifi-mallow",
+		     "toradex,verdin-am62p-nonwifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-yavia.dts
new file mode 100644
index 000000000000..c27bda794b51
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-nonwifi-yavia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-nonwifi.dtsi"
+#include "k3-am62p-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P on Yavia Board";
+	compatible = "toradex,verdin-am62p-nonwifi-yavia",
+		     "toradex,verdin-am62p-nonwifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dahlia.dts
new file mode 100644
index 000000000000..12b57985f38e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dahlia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-wifi.dtsi"
+#include "k3-am62p-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P WB on Dahlia Board";
+	compatible = "toradex,verdin-am62p-wifi-dahlia",
+		     "toradex,verdin-am62p-wifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dev.dts b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dev.dts
new file mode 100644
index 000000000000..bbc2770d5f5d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-dev.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-wifi.dtsi"
+#include "k3-am62p-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P WB on Verdin Development Board";
+	compatible = "toradex,verdin-am62p-wifi-dev",
+		     "toradex,verdin-am62p-wifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-ivy.dts b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-ivy.dts
new file mode 100644
index 000000000000..27467281bc3a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-ivy.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/ivy-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-wifi.dtsi"
+#include "k3-am62p-verdin-ivy.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P WB on Ivy Board";
+	compatible = "toradex,verdin-am62p-wifi-ivy",
+		     "toradex,verdin-am62p-wifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-mallow.dts
new file mode 100644
index 000000000000..e35851451cd4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-wifi.dtsi"
+#include "k3-am62p-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P WB on Mallow Board";
+	compatible = "toradex,verdin-am62p-wifi-mallow",
+		     "toradex,verdin-am62p-wifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-yavia.dts
new file mode 100644
index 000000000000..25e0842bc905
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-verdin-wifi-yavia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+#include "k3-am62p-verdin.dtsi"
+#include "k3-am62p-verdin-wifi.dtsi"
+#include "k3-am62p-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62P WB on Yavia Board";
+	compatible = "toradex,verdin-am62p-wifi-yavia",
+		     "toradex,verdin-am62p-wifi",
+		     "toradex,verdin-am62p",
+		     "ti,am62p5";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
index 140587d02e88..8982a7b9f1a6 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
@@ -49,6 +49,7 @@
 			next-level-cache = <&l2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 135 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -65,6 +66,7 @@
 			next-level-cache = <&l2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 136 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -81,6 +83,7 @@
 			next-level-cache = <&l2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 137 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -97,6 +100,7 @@
 			next-level-cache = <&l2_0>;
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 138 0>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -131,7 +135,7 @@
 
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-supported-hw = <0x01 0x0006>;
+			opp-supported-hw = <0x01 0x0007>;
 			clock-latency-ns = <6000000>;
 		};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
index f0b2fd4165a7..1fd0aaff3193 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
@@ -33,7 +33,7 @@
 &thermal_zones {
 	main0_thermal: main0-thermal {
 		trips {
-			main0_thermal_trip0: main0-thermal-trip {
+			main0_fan: main0-fan {
 				temperature = <65000>;  /* millicelsius */
 				hysteresis = <2000>;    /* millicelsius */
 				type = "active";
@@ -42,7 +42,17 @@
 
 		cooling-maps {
 			map0 {
-				trip = <&main0_thermal_trip0>;
+				trip = <&main0_alert>;
+				cooling-device =
+					<&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+
+			map1 {
+				trip = <&main0_fan>;
 				cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
index d364c247833f..d6e70ee15938 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
@@ -112,6 +112,25 @@
 		regulator-boot-on;
 	};
 
+	vcc_3v3_hdmi: regulator-vcc-3v3-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_sw>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_1v2_hdmi: regulator-vcc-1v2-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_CVCC";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vcc_3v3_mmc: regulator-vcc-3v3-mmc {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3_MMC";
@@ -119,6 +138,7 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 		regulator-boot-on;
+		bootph-all;
 	};
 
 	vcc_3v3_sw: regulator-vcc-3v3-sw {
@@ -214,6 +234,7 @@
 			AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */
 			AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */
 		>;
+		bootph-all;
 	};
 
 	main_rgmii2_pins_default: main-rgmii2-default-pins {
@@ -238,6 +259,7 @@
 			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
 			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
 		>;
+		bootph-all;
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
@@ -247,6 +269,7 @@
 			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
 			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
 		>;
+		bootph-pre-ram;
 	};
 
 	main_usb1_pins_default: main-usb1-default-pins {
@@ -268,7 +291,7 @@
 };
 
 &cpsw_port2 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy3>;
 };
 
@@ -367,6 +390,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmi_int_pins_default>;
 
+		iovcc-supply = <&vcc_3v3_hdmi>;
+		cvcc12-supply = <&vcc_1v2_hdmi>;
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -376,6 +402,7 @@
 
 				sii9022_in: endpoint {
 					remote-endpoint = <&dpi1_out>;
+					bus-width = <16>;
 				};
 			};
 
@@ -393,6 +420,7 @@
 		compatible = "atmel,24c02";
 		pagesize = <16>;
 		reg = <0x51>;
+		vcc-supply = <&vcc_3v3_mmc>;
 	};
 };
 
@@ -406,12 +434,14 @@
 &main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
+	bootph-all;
 	status = "okay";
 };
 
 &main_uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
+	bootph-pre-ram;
 	/* Main UART1 may be used by TIFS firmware */
 	status = "okay";
 };
@@ -443,11 +473,13 @@
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	disable-wp;
 	no-1-8-v;
+	bootph-all;
 	status = "okay";
 };
 
 &usbss0 {
 	ti,vbus-divider;
+	bootph-all;
 	status = "okay";
 };
 
@@ -458,6 +490,7 @@
 
 &usb0 {
 	usb-role-switch;
+	bootph-all;
 
 	port {
 		typec_hs: endpoint {
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 6957b3e44c82..50ed859ae06c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -8,10 +8,11 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
-#include "k3-am625.dtsi"
 
 / {
 	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
 		serial2 = &main_uart0;
 		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
@@ -27,14 +28,7 @@
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory@80000000 {
-		bootph-pre-ram;
-		device_type = "memory";
-		/* 2G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
-	};
-
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -56,15 +50,15 @@
 			linux,cma-default;
 		};
 
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
 			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cb00000 0x00 0x100000>;
+			reg = <0x00 0x9da00000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_m4fss_memory_region: m4f-memory@9cc00000 {
+		wkup_r5fss0_core0_memory_region: memory@9db00000 {
 			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cc00000 0x00 0xe00000>;
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
 			no-map;
 		};
 
@@ -80,11 +74,6 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9db00000 0x00 0xc00000>;
-			no-map;
-		};
 	};
 
 	leds {
@@ -194,22 +183,6 @@
 		>;
 	};
 
-	main_mmc0_pins_default: main-mmc0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
-			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
-			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
-			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
-			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
-			AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
-			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
-			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
-			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
-			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
-		>;
-	};
-
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -301,6 +274,25 @@
 			AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
 		>;
 	};
+
+	main_ecap0_pins_default: main-ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01b8, PIN_OUTPUT, 3) /* (C13) SPI0_CS1.ECAP0_IN_APWM_OUT */
+		>;
+	};
+
+	main_ecap2_pins_default: main-ecap2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01a4, PIN_OUTPUT, 2) /* (B20) MCASP0_ACLKX.ECAP2_IN_APWM_OUT */
+		>;
+	};
+
+	main_epwm1_pins_default: main-epwm1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x019c, PIN_OUTPUT, 6) /* (B18) MCASP0_AXR1.EHRPWM1_A */
+			AM62X_IOPAD(0x01a0, PIN_OUTPUT, 6) /* (E18) MCASP0_AXR0.EHRPWM1_B */
+		>;
+	};
 };
 
 &mcu_pmx0 {
@@ -315,6 +307,10 @@
 	};
 };
 
+&cpsw_mac_syscon {
+	bootph-all;
+};
+
 &wkup_uart0 {
 	/* WKUP UART0 is used by DM firmware */
 	bootph-pre-ram;
@@ -425,14 +421,6 @@
 	clock-frequency = <400000>;
 };
 
-&sdhci0 {
-	bootph-all;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mmc0_pins_default>;
-	disable-wp;
-};
-
 &sdhci1 {
 	/* SD/MMC */
 	bootph-all;
@@ -450,7 +438,7 @@
 
 &cpsw_port1 {
 	bootph-all;
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy0>;
 };
 
@@ -469,20 +457,6 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
 &usbss0 {
 	bootph-all;
 	status = "okay";
@@ -505,6 +479,10 @@
 	};
 };
 
+&usb0_phy_ctrl {
+	bootph-all;
+};
+
 &usb1 {
 	dr_mode = "host";
 	pinctrl-names = "default";
@@ -554,3 +532,26 @@
 &mcu_gpio_intr {
 	status = "reserved";
 };
+
+&ecap0 {
+	/* P26 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap0_pins_default>;
+	status = "okay";
+};
+
+&ecap2 {
+	/* P11 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap2_pins_default>;
+	status = "okay";
+};
+
+&epwm1 {
+	/* P36/P33 of J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_epwm1_pins_default>;
+	status = "okay";
+};
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
index 76ca02127f95..149c59c07182 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -15,6 +15,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
 };
 
 &main_i2c2 {
@@ -22,7 +49,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -39,7 +66,10 @@
 				reg = <0x10>;
 
 				clocks = <&clk_imx219_fixed>;
-				clock-names = "xclk";
+
+				VANA-supply = <&reg_2p8v>;
+				VDIG-supply = <&reg_1p8v>;
+				VDDL-supply = <&reg_1p2v>;
 
 				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
index ccc7f5e43184..fc77fc77fe0b 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -15,6 +15,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <12000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
 };
 
 &main_i2c2 {
@@ -22,7 +49,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -40,6 +67,11 @@
 
 				clocks = <&clk_ov5640_fixed>;
 				clock-names = "xclk";
+
+				AVDD-supply = <&reg_2p8v>;
+				DOVDD-supply = <&reg_1p8v>;
+				DVDD-supply = <&reg_1p5v>;
+
 				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
 
 				port {
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
index 4eaf9d757dd0..fe3bc29632fa 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -15,6 +15,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+	};
 };
 
 &main_i2c2 {
@@ -22,7 +49,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9543";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -40,6 +67,11 @@
 
 				clocks = <&clk_ov5640_fixed>;
 				clock-names = "xclk";
+
+				AVDD-supply = <&reg_2p8v>;
+				DOVDD-supply = <&reg_1p8v>;
+				DVDD-supply = <&reg_3p3v>;
+
 				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
 
 				port {
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index c66289a4362b..d872cc671094 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -51,6 +51,11 @@
 			reg = <0x00000014 0x4>;
 		};
 
+		pcie0_ctrl: pcie-ctrl@4070 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4070 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
 			reg = <0x4080 0x4>;
@@ -916,6 +921,7 @@
 			 <0x78200000 0x00 0x78200000 0x08000>,
 			 <0x78300000 0x00 0x78300000 0x08000>;
 		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss0_core0: r5f@78000000 {
 			compatible = "ti,am64-r5f";
@@ -930,6 +936,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss0_core1: r5f@78200000 {
@@ -945,6 +952,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -958,6 +966,7 @@
 			 <0x78600000 0x00 0x78600000 0x08000>,
 			 <0x78700000 0x00 0x78700000 0x08000>;
 		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss1_core0: r5f@78400000 {
 			compatible = "ti,am64-r5f";
@@ -972,6 +981,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss1_core1: r5f@78600000 {
@@ -987,6 +997,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -1031,12 +1042,12 @@
 		reg = <0x00 0x0f102000 0x00 0x1000>,
 		      <0x00 0x0f100000 0x00 0x400>,
 		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x68000000 0x00 0x00001000>;
+		      <0x06 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
 		max-link-speed = <2>;
 		num-lanes = <1>;
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
@@ -1049,8 +1060,8 @@
 		vendor-id = <0x104c>;
 		device-id = <0xb010>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
-		ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
-			 <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x06 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x06 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>;
 		status = "disabled";
 	};
@@ -1227,6 +1238,15 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x00 0x30000000 0x80000>;
+		clocks = <&k3_clks 81 0>,  /* icssg0_core_clk */
+			 <&k3_clks 81 3>,  /* icssg0_iep_clk */
+			 <&k3_clks 81 16>, /* icssg0_rgmii_mhz_250_clk */
+			 <&k3_clks 81 17>, /* icssg0_rgmii_mhz_50_clk */
+			 <&k3_clks 81 18>, /* icssg0_rgmii_mhz_5_clk */
+			 <&k3_clks 81 19>, /* icssg0_uart_clk */
+			 <&k3_clks 81 20>; /* icssg0_iclk */
+		assigned-clocks = <&k3_clks 81 0>;
+		assigned-clock-parents = <&k3_clks 81 2>;
 
 		icssg0_mem: memories@0 {
 			reg = <0x0 0x2000>,
@@ -1252,7 +1272,7 @@
 					clocks = <&k3_clks 81 0>,  /* icssg0_core_clk */
 						 <&k3_clks 81 20>; /* icssg0_iclk */
 					assigned-clocks = <&icssg0_coreclk_mux>;
-					assigned-clock-parents = <&k3_clks 81 20>;
+					assigned-clock-parents = <&k3_clks 81 0>;
 				};
 
 				icssg0_iepclk_mux: iepclk-mux@30 {
@@ -1397,6 +1417,15 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x00 0x30080000 0x80000>;
+		clocks = <&k3_clks 82 0>,  /* icssg1_core_clk */
+			 <&k3_clks 82 3>,  /* icssg1_iep_clk */
+			 <&k3_clks 82 16>, /* icssg1_rgmii_mhz_250_clk */
+			 <&k3_clks 82 17>, /* icssg1_rgmii_mhz_50_clk */
+			 <&k3_clks 82 18>, /* icssg1_rgmii_mhz_5_clk */
+			 <&k3_clks 82 19>, /* icssg1_uart_clk */
+			 <&k3_clks 82 20>; /* icssg1_iclk */
+		assigned-clocks = <&k3_clks 82 0>;
+		assigned-clock-parents = <&k3_clks 82 2>;
 
 		icssg1_mem: memories@0 {
 			reg = <0x0 0x2000>,
@@ -1422,7 +1451,7 @@
 					clocks = <&k3_clks 82 0>,   /* icssg1_core_clk */
 						 <&k3_clks 82 20>;  /* icssg1_iclk */
 					assigned-clocks = <&icssg1_coreclk_mux>;
-					assigned-clock-parents = <&k3_clks 82 20>;
+					assigned-clock-parents = <&k3_clks 82 0>;
 				};
 
 				icssg1_iepclk_mux: iepclk-mux@30 {
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index 99a6fdfaa7fb..d64fb81b04e2 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -27,6 +27,7 @@
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		bootph-all;
 	};
 
 	reserved_memory: reserved-memory {
@@ -40,65 +41,17 @@
 			no-map;
 		};
 
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		main_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		main_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: m4f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
 	};
 
 	leds {
@@ -132,6 +85,7 @@
 			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4)	/* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
 			AM64X_IOPAD(0x0100, PIN_OUTPUT, 7)	/* (V7) PRG1_PRU0_GPO18.GPIO0_63 */
 		>;
+		bootph-all;
 	};
 
 	cpsw_rgmii1_pins_default: cpsw-rgmii1-default-pins {
@@ -150,6 +104,7 @@
 			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4)	/* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
 			AM64X_IOPAD(0x0154, PIN_INPUT, 7)	/* (V12) PRG1_PRU1_GPO19.GPIO0_84 */
 		>;
+		bootph-all;
 	};
 
 	eeprom_wp_pins_default: eeprom-wp-default-pins {
@@ -169,6 +124,7 @@
 			AM64X_IOPAD(0x0260, PIN_INPUT, 0)	/* (A18) I2C0_SCL */
 			AM64X_IOPAD(0x0264, PIN_INPUT, 0)	/* (B18) I2C0_SDA */
 		>;
+		bootph-all;
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
@@ -185,6 +141,7 @@
 			AM64X_IOPAD(0x0028, PIN_INPUT, 0)	/* (M17) OSPI0_D7 */
 			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0)	/* (L19) OSPI0_CSn0 */
 		>;
+		bootph-all;
 	};
 
 	rtc_pins_default: rtc-defaults-pins {
@@ -201,71 +158,38 @@
 };
 
 &cpsw3g_mdio {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_mdio_pins_default>;
+	bootph-all;
+	status = "okay";
 
 	cpsw3g_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&main_gpio0>;
 		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <1000>;
 		reset-deassert-us = <1000>;
+		bootph-all;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 	};
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy1>;
+	bootph-all;
 	status = "okay";
 };
 
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster6 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-};
-
 &main_i2c0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
+	bootph-all;
+	status = "okay";
 
 	eeprom@50 {
 		compatible = "atmel,24c32";
@@ -330,41 +254,14 @@
 	};
 };
 
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
+&main_pktdma {
+	bootph-all;
 };
 
 &ospi0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
+	status = "okay";
 
 	serial_flash: flash@0 {
 		compatible = "jedec,spi-nor";
@@ -377,15 +274,17 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <0>;
+		bootph-all;
 	};
 };
 
 &sdhci0 {
-	status = "okay";
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	keep-power-in-suspend;
+	bootph-all;
+	status = "okay";
 };
 
 &tscadc0 {
@@ -394,3 +293,5 @@
 		ti,adc-channels = <0 1 2 3 4 5 6 7>;
 	};
 };
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am64-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am64-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..6b10646ae64a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-ti-ipc-firmware.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM64 SoCs
+ *
+ * Copyright (C) 2024-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	main_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	mcu_m4fss_dma_memory_region: memory@a4000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_m4fss_memory_region: memory@a4100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@a5000000 {
+		reg = <0x00 0xa5000000 0x00 0x00800000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster6 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+};
+
+/* main_timer8 is used by r5f0-0 */
+&main_timer8 {
+	status = "reserved";
+};
+
+/* main_timer9 is used by r5f0-1 */
+&main_timer9 {
+	status = "reserved";
+};
+
+/* main_timer10 is used by r5f1-0 */
+&main_timer10 {
+	status = "reserved";
+};
+
+/* main_timer11 is used by r5f1-1 */
+&main_timer11 {
+	status = "reserved";
+};
+
+&main_r5fss0 {
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss1 {
+	status = "okay";
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+	status = "okay";
+};
+
+&mcu_m4fss {
+	mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
+	memory-region = <&mcu_m4fss_dma_memory_region>,
+			<&mcu_m4fss_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso
index 6b029539e0db..a7e8d4ea98ac 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso
@@ -46,6 +46,7 @@
 		max-functions = /bits/ 8 <1>;
 		phys = <&serdes0_pcie_link>;
 		phy-names = "pcie-phy";
-		ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
+		bootph-all;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index f8ec40523254..88093ab74502 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -42,7 +42,7 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -53,71 +53,17 @@
 			no-map;
 		};
 
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		main_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		main_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: m4f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a5000000 {
-			reg = <0x00 0xa5000000 0x00 0x00800000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	evm_12v0: regulator-0 {
@@ -597,7 +543,6 @@
 	status = "okay";
 	non-removable;
 	ti,driver-strength-ohm = <50>;
-	disable-wp;
 	bootph-all;
 };
 
@@ -634,13 +579,13 @@
 
 &cpsw_port1 {
 	bootph-all;
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy0>;
 	status = "okay";
 };
 
 &cpsw_port2 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy3>;
 	status = "okay";
 };
@@ -663,6 +608,9 @@
 	/* ADC is reserved for R5 usage */
 	status = "reserved";
 
+	dmas = <&main_bcdma 0 0x440f 0>, <&main_bcdma 0 0x4410 0>;
+	dma-names = "fifo0", "fifo1";
+
 	adc {
 		ti,adc-channels = <0 1 2 3 4 5 6 7>;
 	};
@@ -728,74 +676,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster6 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
 &serdes_ln_ctrl {
 	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
 };
@@ -859,3 +739,5 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&icssg1_iep0_pins_default>;
 };
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
index bd9a5caf20da..023b2a6aaa56 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
@@ -2,17 +2,19 @@
 /*
  * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
  *
- * Overlay for SolidRun AM642 HummingBoard-T to enable PCI-E.
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53, with PCI-E.
+ *
  */
 
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/phy/phy.h>
+#include "k3-am642-hummingboard-t.dts"
 
 #include "k3-serdes.h"
 
+/ {
+	model = "SolidRun AM642 HummingBoard-T with PCI-E";
+};
+
 &pcie0_rc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_default_pins>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
index ffcc3bd3c7bc..ee9bd618f370 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
@@ -2,16 +2,19 @@
 /*
  * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
  *
- * Overlay for SolidRun AM642 HummingBoard-T to enable USB-3.1.
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53, with USB-3.1 Gen 1.
+ *
  */
 
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/phy/phy.h>
+#include "k3-am642-hummingboard-t.dts"
 
 #include "k3-serdes.h"
 
+/ {
+	model = "SolidRun AM642 HummingBoard-T with USB-3.1 Gen 1";
+};
+
 &serdes0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso
new file mode 100644
index 000000000000..7fc73cfacadb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC America LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83869.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet3 = "/icssg1-ethernet/ethernet-ports/port@0";
+		ethernet4 = "/icssg1-ethernet/ethernet-ports/port@1";
+	};
+
+	icssg1-ethernet {
+		compatible = "ti,am642-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg1_rgmii1_pins_default>, <&icssg1_rgmii2_pins_default>;
+
+		dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */
+				<&main_pktdma 0xc201 15>, /* egress slice 0 */
+				<&main_pktdma 0xc202 15>, /* egress slice 0 */
+				<&main_pktdma 0xc203 15>, /* egress slice 0 */
+				<&main_pktdma 0xc204 15>, /* egress slice 1 */
+				<&main_pktdma 0xc205 15>, /* egress slice 1 */
+				<&main_pktdma 0xc206 15>, /* egress slice 1 */
+				<&main_pktdma 0xc207 15>, /* egress slice 1 */
+				<&main_pktdma 0x4200 15>, /* ingress slice 0 */
+				<&main_pktdma 0x4201 15>, /* ingress slice 1 */
+				<&main_pktdma 0x4202 0>, /* mgmnt rsp slice 0 */
+				<&main_pktdma 0x4203 0>; /* mgmnt rsp slice 1 */
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+					"tx1-0", "tx1-1", "tx1-2", "tx1-3",
+					"rx0", "rx1",
+					"rxmgm0", "rxmgm1";
+
+		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+		interrupt-parent = <&icssg1_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+		sram = <&oc_sram>;
+
+		ti,iep = <&icssg1_iep0>, <&icssg1_iep1>;
+		ti,mii-g-rt = <&icssg1_mii_g_rt>;
+		ti,mii-rt = <&icssg1_mii_rt>;
+		ti,pa-stats = <&icssg1_pa_stats>;
+		ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
+		ti,pruss-gp-mux-sel = <2>,	/* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg1_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg1_phy1>;
+				phy-mode = "rgmii-id";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				ti,syscon-rgmii-delay = <&main_conf 0x4110>;
+			};
+
+			icssg1_emac1: port@1 {
+				reg = <1>;
+				phy-handle = <&icssg1_phy2>;
+				phy-mode = "rgmii-id";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				ti,syscon-rgmii-delay = <&main_conf 0x4114>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	icssg1_mdio_pins_default: icssg1-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* (Y6) PRG1_MDIO0_MDC */
+			AM64X_IOPAD(0x0158, PIN_INPUT, 0)  /* (AA6) PRG1_MDIO0_MDIO */
+		>;
+	};
+
+	icssg1_rgmii1_pins_default: icssg1-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+			AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+			AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+			AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+			AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+			AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+			AM64X_IOPAD(0x00e4, PIN_OUTPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */
+			AM64X_IOPAD(0x00e8, PIN_OUTPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */
+			AM64X_IOPAD(0x00ec, PIN_OUTPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */
+			AM64X_IOPAD(0x00f0, PIN_OUTPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */
+			AM64X_IOPAD(0x00f4, PIN_OUTPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */
+			AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+		>;
+	};
+
+	icssg1_rgmii2_pins_default: icssg1-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* (W11) PRG1_PRU1_GPO0.PRG1_RGMII2_RD0 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* (V11) PRG1_PRU1_GPO1.PRG1_RGMII2_RD1 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* (AA12) PRG1_PRU1_GPO2.PRG1_RGMII2_RD2 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* (Y12) PRG1_PRU1_GPO3.PRG1_RGMII2_RD3 */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* (W12) PRG1_PRU1_GPO4.PRG1_RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* (U11) PRG1_PRU1_GPO6.PRG1_RGMII2_RXC */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* (AA10) PRG1_PRU1_GPO11.PRG1_RGMII2_TD0 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* (V10) PRG1_PRU1_GPO12.PRG1_RGMII2_TD1 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* (U10) PRG1_PRU1_GPO13.PRG1_RGMII2_TD2 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* (AA11) PRG1_PRU1_GPO14.PRG1_RGMII2_TD3 */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* (Y11) PRG1_PRU1_GPO15.PRG1_RGMII2_TX_CTL */
+			AM64X_IOPAD(0x0148, PIN_INPUT, 2) /* (Y10) PRG1_PRU1_GPO16.PRG1_RGMII2_TXC */
+		>;
+	};
+};
+
+&icssg1_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg1_mdio_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	icssg1_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+		rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		rx-internal-delay-ps = <2000>;
+		tx-internal-delay-ps = <2000>;
+		ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>;
+		ti,min-output-impedance;
+	};
+
+	icssg1_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+		rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		rx-internal-delay-ps = <2000>;
+		tx-internal-delay-ps = <2000>;
+		ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>;
+		ti,min-output-impedance;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index bc8e1ce11047..e4afa8c0a8ca 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -100,6 +100,7 @@
 		ti,mii-g-rt = <&icssg0_mii_g_rt>;
 		ti,mii-rt = <&icssg0_mii_rt>;
 		ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
+		ti,pa-stats = <&icssg0_pa_stats>;
 
 		ethernet-ports {
 			#address-cells = <1>;
@@ -171,6 +172,7 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
 		regulator-always-on;
+		bootph-all;
 	};
 };
 
@@ -275,6 +277,7 @@
 			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0)	/* (J19) MMC1_CMD */
 			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0)	/* (D19) MMC1_SDCD */
 		>;
+		bootph-all;
 	};
 
 	main_spi0_pins_default: main-spi0-default-pins {
@@ -291,6 +294,7 @@
 			AM64X_IOPAD(0x0230, PIN_INPUT, 0)	/* (D15) UART0_RXD */
 			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0)	/* (C16) UART0_TXD */
 		>;
+		bootph-all;
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
@@ -319,6 +323,8 @@
 &icssg0_mdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&icssg0_mdio_pins_default &clkout0_pins_default>;
+	assigned-clocks = <&k3_clks 157 123>;
+	assigned-clock-parents = <&k3_clks 157 125>;
 	status = "okay";
 
 	icssg0_phy1: ethernet-phy@1 {
@@ -349,10 +355,10 @@
 };
 
 &main_i2c1 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
+	status = "okay";
 
 	eeprom@51 {
 		compatible = "atmel,24c02";
@@ -382,25 +388,25 @@
 };
 
 &main_mcan0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan0_pins_default>;
 	phys = <&can_tc1>;
+	status = "okay";
 };
 
 &main_mcan1 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan1_pins_default>;
 	phys = <&can_tc2>;
+	status = "okay";
 };
 
 &main_spi0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_spi0_pins_default>;
 	cs-gpios = <0>, <&main_gpio1 43 GPIO_ACTIVE_LOW>;
 	ti,pindir-d0-out-d1-in;
+	status = "okay";
 
 	tpm@1 {
 		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
@@ -410,25 +416,27 @@
 };
 
 &main_uart0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
+	bootph-all;
+	status = "okay";
 };
 
 &main_uart1 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
 	uart-has-rtscts;
+	status = "okay";
 };
 
 &sdhci1 {
-	status = "okay";
 	vmmc-supply = <&vcc_3v3_mmc>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	disable-wp;
 	no-1-8-v;
+	bootph-all;
+	status = "okay";
 };
 
 &serdes0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
new file mode 100644
index 000000000000..996c42ec4253
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Authors:
+ *   Wadim Egorov <w.egorov@phytec.de>
+ *   Daniel Schultz <d.schultz@phytec.de>
+ *
+ * GPIO, SPI and UART examples for the X27 expansion connector.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		serial5 = "/bus@f4000/serial@2830000";
+	};
+};
+
+&main_pmx0 {
+	main_gpio1_exp_header_gpio_pins_default: main-gpio1-exp-header-gpio-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0220, PIN_INPUT, 7)	/* (D14) SPI1_CS1.GPIO1_48 */
+		>;
+	};
+
+	main_spi1_pins_default: main-spi1-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0224, PIN_INPUT, 0)	/* (C14) SPI1_CLK */
+			AM64X_IOPAD(0x021C, PIN_OUTPUT, 0)	/* (B14) SPI1_CS0 */
+			AM64X_IOPAD(0x0228, PIN_OUTPUT, 0)	/* (B15) SPI1_D0 */
+			AM64X_IOPAD(0x022C, PIN_INPUT, 0)	/* (A15) SPI1_D1 */
+		>;
+	};
+
+	main_uart3_pins_default: main-uart3-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0048, PIN_INPUT, 2)       /* (U20) GPMC0_AD3.UART3_RXD */
+			AM64X_IOPAD(0x004c, PIN_OUTPUT, 2)      /* (U18) GPMC0_AD4.UART3_TXD */
+		>;
+	};
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_gpio1_exp_header_gpio_pins_default>;
+	status = "okay";
+};
+
+&main_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi1_pins_default>;
+	ti,pindir-d0-out-d1-in = <1>;
+	status = "okay";
+};
+
+&main_uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart3_pins_default>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 33e421ec18ab..34bfa99bd4b8 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -40,7 +40,7 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -51,71 +51,17 @@
 			no-map;
 		};
 
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		main_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		main_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: m4f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a5000000 {
-			reg = <0x00 0xa5000000 0x00 0x00800000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	vusb_main: regulator-0 {
@@ -553,13 +499,13 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy0>;
 	status = "okay";
 };
 
 &cpsw_port2 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy1>;
 	status = "okay";
 };
@@ -642,74 +588,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster6 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
 &ecap0 {
 	status = "okay";
 	/* PWM is available on Pin 1 of header J3 */
@@ -723,3 +601,5 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_eqep0_pins_default>;
 };
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
index a5cec9a07510..fcbcc04521b8 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
@@ -105,7 +105,7 @@
 		device_type = "memory";
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -115,53 +115,17 @@
 			no-map;
 		};
 
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		main_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		main_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
 	};
 
 	vdd_mmc0: regulator-vdd-mmc0 {
@@ -263,34 +227,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_default_pins>;
@@ -488,30 +424,6 @@
 	};
 };
 
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
 /* SoC default UART console */
 &main_uart0 {
 	pinctrl-names = "default";
@@ -590,3 +502,5 @@
 	ti,vbus-divider;
 	ti,usb2-only;
 };
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index e06a3b178b34..46be6824dd16 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -175,6 +175,7 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&main_gpio1 43 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		bootph-all;
 	};
 };
 
@@ -185,7 +186,7 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy0>;
 	status = "okay";
 };
@@ -201,8 +202,6 @@
 		reset-gpios = <&main_gpio0 44 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <1000>;
 		reset-deassert-us = <1000>;
-		ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 	};
@@ -230,8 +229,6 @@
 		reset-gpios = <&main_gpio1 47 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <1000>;
 		reset-deassert-us = <1000>;
-		ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 	};
@@ -242,8 +239,6 @@
 		reset-gpios = <&main_gpio1 51 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <1000>;
 		reset-deassert-us = <1000>;
-		ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 	};
@@ -266,6 +261,7 @@
 		"", "", "STATUS_OUT_3", "EN_DIG_OUT_4", /* 32-35 */
 		"", "", "STATUS_OUT_4", "DIG_IN_1", /* 36-39 */
 		"DIG_IN_2", "DIG_IN_3", "DIG_IN_4"; /* 40- */
+	bootph-all;
 };
 
 &main_gpio1 {
@@ -291,6 +287,7 @@
 		"", "", "", "", /* 60-63 */
 		"", "", "", "ADC_INT#", /* 64-67 */
 		"BG95_PWRKEY", "BG95_RESET"; /* 68- */
+	bootph-all;
 
 	line50-hog {
 		/* See also usb0 */
@@ -340,6 +337,7 @@
 &main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins>;
+	bootph-pre-ram;
 	status = "okay";
 };
 
@@ -499,6 +497,11 @@
 
 &serdes_ln_ctrl {
 	idle-states = <AM64_SERDES0_LANE0_USB>;
+	bootph-all;
+};
+
+&serdes_refclk {
+	bootph-all;
 };
 
 &serdes0 {
@@ -506,6 +509,7 @@
 		reg = <0>;
 		#phy-cells = <0>;
 		resets = <&serdes_wiz0 1>;
+		bootph-all;
 		cdns,num-lanes = <1>;
 		cdns,phy-type = <PHY_TYPE_USB3>;
 	};
@@ -518,6 +522,7 @@
 	cd-gpios = <&main_gpio1 77 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	no-mmc;
+	bootph-all;
 	ti,fails-without-test-cd;
 	/* Enabled by overlay */
 };
@@ -541,9 +546,11 @@
 	maximum-speed = "super-speed";
 	phys = <&serdes0_usb_link>;
 	phy-names = "cdns3,usb3-phy";
+	bootph-all;
 };
 
 &usbss0 {
+	bootph-all;
 	ti,vbus-divider;
 };
 
@@ -631,6 +638,7 @@
 			/* (P19) GPMC0_CSn2.GPIO0_43 - MMC1_CTRL */
 			AM64X_IOPAD(0x00b0, PIN_OUTPUT, 7)
 		>;
+		bootph-all;
 	};
 
 	main_gpio1_hog_pins: main-gpio1-hog-pins {
@@ -754,6 +762,7 @@
 			/* (#N/A) MMC1_CLKLB */
 			AM64X_IOPAD(0x0290, PIN_INPUT, 0)
 		>;
+		bootph-all;
 	};
 
 	main_mmc1_reg_pins: main-mmc1-reg-pins {
@@ -761,6 +770,7 @@
 			/* (C13) SPI0_CS1.GPIO1_43 - MMC1_SD_EN */
 			AM64X_IOPAD(0x020c, PIN_OUTPUT, 7)
 		>;
+		bootph-all;
 	};
 
 	main_mmc1_wifi_pwrseq_pins: main-mmc1-wifi-pwrseq-pins {
@@ -803,6 +813,7 @@
 			/* (C16) UART0_TXD */
 			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0)
 		>;
+		bootph-pre-ram;
 	};
 
 	main_uart1_pins: main-uart1-pins {
@@ -871,6 +882,7 @@
 			/* (E19) USB0_DRVVBUS */
 			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0)
 		>;
+		bootph-all;
 	};
 
 	pru_icssg1_mdio_pins: pru-icssg1-mdio-pins {
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
index 828d815d6bdf..dde19d0784e3 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -17,10 +17,10 @@
 		device_type = "memory";
 		/* 1G RAM - default variant */
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
-
+		bootph-pre-ram;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -31,59 +31,17 @@
 			no-map;
 		};
 
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		main_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		main_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a5000000 {
-			reg = <0x00 0xa5000000 0x00 0x00800000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	reg_1v8: regulator-1v8 {
@@ -96,10 +54,15 @@
 	};
 };
 
+&fss {
+	bootph-all;
+};
+
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins>;
 	clock-frequency = <400000>;
+	bootph-pre-ram;
 	status = "okay";
 
 	tmp1075: temperature-sensor@4a {
@@ -114,6 +77,7 @@
 		vcc-supply = <&reg_1v8>;
 		pagesize = <16>;
 		read-only;
+		bootph-pre-ram;
 	};
 
 	pcf85063: rtc@51 {
@@ -130,71 +94,11 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster6 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
 &ospi0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins>;
+	bootph-all;
+	status = "okay";
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -202,6 +106,7 @@
 		spi-tx-bus-width = <8>;
 		spi-rx-bus-width = <8>;
 		spi-max-frequency = <84000000>;
+		bootph-all;
 		cdns,tshsl-ns = <60>;
 		cdns,tsd2d-ns = <60>;
 		cdns,tchsh-ns = <60>;
@@ -224,6 +129,7 @@
 	disable-wp;
 	no-sdio;
 	no-sd;
+	bootph-all;
 	ti,driver-strength-ohm = <50>;
 };
 
@@ -235,6 +141,7 @@
 			/* (B18) I2C0_SDA */
 			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0)
 		>;
+		bootph-pre-ram;
 	};
 
 	ospi0_pins: ospi0-pins {
@@ -262,5 +169,8 @@
 			/* (N19) OSPI0_DQS */
 			AM64X_IOPAD(0x0008, PIN_INPUT, 0)
 		>;
+		bootph-all;
 	};
 };
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index e5136ed94765..a9a4e7401a49 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -36,7 +36,7 @@
 		stdout-path = "serial3:115200n8";
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -47,36 +47,18 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xa0000000 0 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xa0100000 0 0xf00000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0xa1000000 0 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0xa1100000 0 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a2000000 {
-			reg = <0x00 0xa2000000 0x00 0x00200000>;
-			alignment = <0x1000>;
-			no-map;
-		};
-
 		/* To reserve the power-on(PON) reason for watchdog reset */
 		wdt_reset_memory_region: wdt-memory@a2200000 {
 			reg = <0x00 0xa2200000 0x00 0x1000>;
@@ -475,10 +457,6 @@
 	#size-cells = <0>;
 };
 
-&mcu_cpsw {
-	status = "disabled";
-};
-
 &sdhci1 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -582,38 +560,6 @@
 	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-tx = <1 0 0>;
-		ti,mbox-rx = <0 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-tx = <1 0 0>;
-		ti,mbox-rx = <0 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-};
-
-&mcu_r5fss0_core1 {
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
-};
-
 &mcu_rti1 {
 	memory-region = <&wdt_reset_memory_region>;
 };
@@ -686,3 +632,9 @@
 	/* lock-step mode not supported on iot2050 boards */
 	ti,cluster-mode = <0>;
 };
+
+#include "k3-am65-ti-ipc-firmware.dtsi"
+
+&rtos_ipc_memory_region {
+	reg = <0x00 0xa2000000 0x00 0x00200000>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 94a812a1355b..61c11dc92d9c 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -449,6 +449,8 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x5>;
 		ti,otap-del-sel-hs200 = <0x5>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
 		ti,itap-del-sel-ddr52 = <0x0>;
 		dma-coherent;
 		status = "disabled";
@@ -479,7 +481,7 @@
 	};
 
 	scm_conf: scm-conf@100000 {
-		compatible = "syscon", "simple-mfd";
+		compatible = "ti,am654-system-controller", "syscon", "simple-mfd";
 		reg = <0 0x00100000 0 0x1c000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -653,6 +655,7 @@
 			      <0x00 0x32800000 0x00 0x100000>;
 			interrupt-names = "rx_011";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			bootph-all;
 		};
 
 		hwspinlock: spinlock@30e00000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 7cf1f646500a..74439e0c16a5 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -354,6 +354,8 @@
 			    "tx4", "tx5", "tx6", "tx7",
 			    "rx";
 
+		status = "disabled";
+
 		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -408,6 +410,7 @@
 		ranges = <0x41000000 0x00 0x41000000 0x20000>,
 			 <0x41400000 0x00 0x41400000 0x20000>;
 		power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		mcu_r5fss0_core0: r5f@41000000 {
 			compatible = "ti,am654-r5f";
@@ -422,6 +425,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		mcu_r5fss0_core1: r5f@41400000 {
@@ -437,6 +441,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am65-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..61ab0357fc0d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-ti-ipc-firmware.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM65 SoCs
+ *
+ * Copyright (C) 2016-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0 0xa1000000 0 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0 0xa1100000 0 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@a2000000 {
+		reg = <0x00 0xa2000000 0x00 0x00100000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	status = "okay";
+};
+
+&mcu_r5fss0_core1 {
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index eee072e44a42..d62a0be767c8 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -21,16 +21,19 @@
 		k3_pds: power-controller {
 			compatible = "ti,sci-pm-domain";
 			#power-domain-cells = <2>;
+			bootph-all;
 		};
 
 		k3_clks: clock-controller {
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
+			bootph-all;
 		};
 
 		k3_reset: reset-controller {
 			compatible = "ti,sci-reset";
 			#reset-cells = <2>;
+			bootph-all;
 		};
 	};
 
@@ -43,6 +46,7 @@
 		chipid: chipid@14 {
 			compatible = "ti,am654-chipid";
 			reg = <0x14 0x4>;
+			bootph-all;
 		};
 	};
 
@@ -107,5 +111,6 @@
 		reg = <0x42050000 0x25c>;
 		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
 		#thermal-sensor-cells = <1>;
+		bootph-all;
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
index 364c57b3b3a0..7a3953d64fd8 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
@@ -15,8 +15,20 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 &{/} {
+	vcc_5v0: lcd-regulator {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&evm_12v0>;
+	};
+
 	display0 {
 		compatible = "rocktech,rk101ii01d-ct";
+		power-supply = <&vcc_5v0>;
 		backlight = <&lcd_bl>;
 		enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
 		port {
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index aa7139cc8a92..46c58162eca0 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -39,7 +39,7 @@
 		      <0x00000008 0x80000000 0x00000000 0x80000000>;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -50,35 +50,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xa0000000 0 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xa0100000 0 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0xa1000000 0 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0xa1100000 0 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a2000000 {
-			reg = <0x00 0xa2000000 0x00 0x00100000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	gpio-keys {
@@ -144,6 +126,7 @@
 		regulator-boot-on;
 		vin-supply = <&vcc3v3_io>;
 		gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
+		bootph-all;
 	};
 };
 
@@ -155,12 +138,14 @@
 			AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1)	/* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
 			AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1)	/* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
 		>;
+		bootph-all;
 	};
 
 	ddr_vtt_pins_default: ddr-vtt-default-pins {
 		pinctrl-single,pins = <
 			AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7)	/* WKUP_GPIO0_28 */
 		>;
+		bootph-all;
 	};
 
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
@@ -168,6 +153,7 @@
 			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
 			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
 		>;
+		bootph-all;
 	};
 
 	push_button_pins_default: push-button-default-pins {
@@ -191,6 +177,7 @@
 			AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* (R3) MCU_OSPI0_D7 */
 			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
 		>;
+		bootph-all;
 	};
 
 	wkup_pca554_default: wkup-pca554-default-pins {
@@ -206,6 +193,7 @@
 			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)	/* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */
 			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)	/* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */
 		>;
+		bootph-all;
 	};
 
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
@@ -248,6 +236,7 @@
 			AM65X_IOPAD(0x01ec, PIN_INPUT, 0)	/* (AG11) UART0_CTSn */
 			AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0)	/* (AD11) UART0_RTSn */
 		>;
+		bootph-all;
 	};
 
 	main_i2c2_pins_default: main-i2c2-default-pins {
@@ -281,6 +270,7 @@
 			AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
 			AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
 		>;
+		bootph-all;
 	};
 
 	main_mmc1_pins_default: main-mmc1-default-pins {
@@ -294,6 +284,7 @@
 			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
 			AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
 		>;
+		bootph-all;
 	};
 
 	usb1_pins_default: usb1-default-pins {
@@ -343,6 +334,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+	bootph-all;
 };
 
 &wkup_i2c0 {
@@ -368,6 +360,7 @@
 		ti,vsel0-state-high;
 		ti,vsel1-state-high;
 		ti,enable-vout-discharge;
+		bootph-all;
 	};
 
 	gpio@38 {
@@ -456,7 +449,7 @@
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
-	disable-wp;
+	bootph-all;
 };
 
 /*
@@ -471,6 +464,7 @@
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
+	bootph-all;
 };
 
 &usb1 {
@@ -509,38 +503,6 @@
 	status = "disabled";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-tx = <1 0 0>;
-		ti,mbox-rx = <0 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-tx = <1 0 0>;
-		ti,mbox-rx = <0 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-};
-
-&mcu_r5fss0_core1 {
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
-};
-
 &ospi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -609,6 +571,7 @@
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -624,10 +587,16 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy0>;
 };
 
 &dss {
 	status = "disabled";
 };
+
+&wkup_gpio0 {
+	bootph-all;
+};
+
+#include "k3-am65-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso
index c3cb752f8cd7..d04dd7a44008 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso
@@ -46,6 +46,7 @@
 
 &dwc3_0 {
 	status = "okay";
+	bootph-all;
 };
 
 &usb0_phy {
diff --git a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso
index 333e423e8bb6..04393f21d712 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso
@@ -45,6 +45,7 @@
 	<&k3_clks 151 8>;      /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */
 	phys = <&serdes0 PHY_TYPE_USB3 0>;
 	phy-names = "usb3-phy";
+	bootph-all;
 };
 
 &usb0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
index ae842b85b70d..12af6cb7f65c 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -50,5 +50,4 @@
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
-	disable-wp;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
index b829f4bcab69..adf4da7dfa2d 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
@@ -145,7 +145,7 @@
 	pinctrl-0 = <&main_spi0_pins>;
 
 	#address-cells = <1>;
-	#size-cells= <0>;
+	#size-cells = <0>;
 };
 
 &mcu_spi0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
index 44dfbdf89277..5255e04b9ac7 100644
--- a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
+++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
@@ -50,7 +50,13 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
@@ -243,12 +249,13 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy0>;
 	status = "okay";
 };
 
 &main_gpio1 {
+	bootph-all;
 	status = "okay";
 };
 
@@ -391,3 +398,5 @@
 	ti,fails-without-test-cd;
 	status = "okay";
 };
+
+#include "k3-j722s-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso
new file mode 100644
index 000000000000..ae5e2b52594b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Kontron SMARC-sa67 board on the Kontron Eval Carrier 2.2.
+ *
+ * Copyright (c) 2025 Kontron Europe GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_fan_pins_default>;
+		interrupts-extended = <&main_gpio1 7 IRQ_TYPE_EDGE_FALLING>;
+		#cooling-cells = <2>;
+		pwms = <&epwm2 1 4000000 0>;
+		cooling-levels = <1 128 192 255>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out Jack",
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "LINEOUTR",
+			"Line Out Jack", "LINEOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN2L", "Microphone Jack",
+			"IN2R", "Microphone Jack";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+
+		dailink0_master: simple-audio-card,codec {
+			sound-dai = <&wm8904>;
+			clocks = <&audio_refclk0>;
+		};
+	};
+
+	cvcc_1p8v_i2s: regulator-carrier-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8_S0_I2S";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cvcc_1p8v_s0: regulator-carrier-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8_S0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cvcc_3p3v_s0: regulator-carrier-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_S0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&audio_refclk0 {
+	status = "okay";
+};
+
+&epwm2 {
+	status = "okay";
+};
+
+&main_pmx0 {
+	pwm_fan_pins_default: pwm-fan-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x1ec, PIN_OUTPUT, 8)	/* (A22) I2C1_SDA.EHRPWM2_B */
+			J722S_IOPAD(0x194, PIN_INPUT, 0)	/* (A25) MCASP0_AXR3.GPIO1_7 */
+		>;
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&mcu_i2c0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wm8904: audio-codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&audio_refclk0>;
+		clock-names = "mclk";
+		AVDD-supply = <&cvcc_1p8v_i2s>;
+		CPVDD-supply = <&cvcc_1p8v_i2s>;
+		DBVDD-supply = <&cvcc_1p8v_i2s>;
+		DCVDD-supply = <&cvcc_1p8v_i2s>;
+		MICVDD-supply = <&cvcc_1p8v_i2s>;
+	};
+};
+
+&mcu_spi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+		vcc-supply = <&cvcc_1p8v_s0>;
+	};
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* SMARC Carrier EEPROM */
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&cvcc_3p3v_s0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts
new file mode 100644
index 000000000000..7169d934adac
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts
@@ -0,0 +1,1091 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Kontron SMARC-sAM67 module
+ *
+ * Copyright (c) 2025 Kontron Europe GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include "k3-j722s.dtsi"
+#include "k3-serdes.h"
+
+/ {
+	compatible = "kontron,sa67", "ti,j722s";
+	model = "Kontron SMARC-sAM67";
+
+	aliases {
+		serial0 = &mcu_uart0;
+		serial1 = &main_uart0;
+		serial2 = &main_uart5;
+		serial3 = &wkup_uart0;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &wkup_rtc0;
+	};
+
+	lcd0_backlight: backlight-1 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd0_backlight_pins_default>;
+		pwms = <&epwm1 0 50000 0>;
+		brightness-levels = <0 32 64 96 128 160 192 224 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&main_gpio0 29 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	lcd1_backlight: backlight-2 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd1_backlight_pins_default>;
+		pwms = <&epwm1 1 50000 0>;
+		brightness-levels = <0 32 64 96 128 160 192 224 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&main_gpio1 18 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	connector-1 {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_connector_pins_default>;
+		type = "micro";
+		id-gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&vcc_usb0_vbus>;
+
+		port  {
+			usb0_connector: endpoint {
+				remote-endpoint = <&usb0_hc>;
+			};
+		};
+
+	};
+
+	memory@80000000 {
+		/* Filled in by bootloader */
+		reg = <0x00000000 0x00000000 0x00000000 0x00000000>,
+		      <0x00000000 0x00000000 0x00000000 0x00000000>;
+		device_type = "memory";
+		bootph-pre-ram;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x10000000>;
+			alignment = <0x2000>;
+			linux,cma-default;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+	};
+
+	vin_5p0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V0_5V25_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_3p3_s5: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_S5";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vin_5p0>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_1p8_s5: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8_S5";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vin_5p0>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_3p3_s0: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_S0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3p3_s5>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&tps652g1 1 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vcc_3p3_sd_s0: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDIO_PWR_EN";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_3p3_sd_s0_pins_default>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&main_gpio0 7 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vcc_3p3_sd_vio_s0: regulator-6 {
+		compatible = "regulator-gpio";
+		regulator-name = "V_3V3_1V8_SD_S0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_3p3_sd_vio_s0_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3p3_s0>;
+		regulator-boot-on;
+		enable-gpios = <&main_gpio0 7 GPIO_ACTIVE_HIGH>;
+		gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0x0>,
+			 <1800000 0x1>;
+		bootph-all;
+	};
+
+	vcc_3p3_cam_s0: regulator-7 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_CAM_S0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_3p3_cam_s0_pins_default>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3p3_s5>;
+		enable-active-high;
+		interrupts-extended = <&main_gpio1 30 IRQ_TYPE_EDGE_FALLING>;
+		bootph-all;
+	};
+
+	vcc_1p1_s0: regulator-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V1_S0";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_1p1_s3>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		/* shared with V_0V75_0V85_CORE_S0 */
+		gpios = <&tps652g1 4 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vcc_0p85_vcore_s0: regulator-9 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_0V75_0V85_CORE_S0";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vin_5p0>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpios = <&tps652g1 4 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vcc_lcd0_panel: regulator-10 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0_VDD_EN";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_lcd0_panel_pins_default>;
+		enable-active-high;
+		gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc_lcd1_panel: regulator-11 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD1_VDD_EN";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_lcd1_panel_pins_default>;
+		enable-active-high;
+		gpios = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc_usb0_vbus: regulator-12 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB0_EN_OC#";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_usb0_vbus_pins_default>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpios = <&main_gpio1 50 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&audio_refclk0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_refclk0_pins_default>;
+	status = "disabled";
+};
+
+&audio_refclk1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_refclk1_pins_default>;
+	status = "disabled";
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw3g_pins_default>, <&rgmii1_pins_default>,
+		    <&rgmii2_pins_default>;
+	status = "okay";
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw3g_mdio_pins_default>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&phy0>;
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&main_gpio0 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "SOC_SDIO_PWR_EN", "VSD_SEL",
+		"RESET_OUT#", "I2C_MUX_RST#", "SPI_FLASH_CS#", "QPSI_CS0#",
+		"QSPI_CS1#", "BOOT_SEL1", "BRDCFG0", "BRDCFG1", "BRDCFG2",
+		"BRDCFG3", "BRDCFG4", "", "BRDREV0", "BRDREV1", "", "", "", "",
+		"", "", "LCD0_BKLT_EN", "LCD0_VDD_EN", "GBE_INT#", "DSI0_TE",
+		"CHARGING#", "USB0_OTG_ID", "PMIC_INT#", "RTC_INT#",
+		"EDP_BRIDGE_EN", "EDP_BRIDGE_IRQ#", "", "CHARGER_PRSNT#", "",
+		"", "", "", "BOOT_SEL2#", "CAM2_RST#", "CAM2_PWR#", "",
+		"CAM3_RST#", "CAM3_PWR#", "GPIO0", "GPIO1", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "GPIO10", "GPIO11",
+		"SLEEP#", "LID#";
+
+	bootph-all;
+	status = "okay";
+};
+
+&main_gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "GPIO6", "GPIO7", "", "", "", "",
+		"GPIO8", "GPIO9", "PCIE_A_RST#", "", "BATLOW#", "LCD1_BKLT_EN",
+		"LCD1_VDD_EN", "", "", "", "", "GPIO2", "GPIO3", "", "",
+		"GPIO4", "GPIO5", "CAM_S0_FAULT#", "BOOT_SEL0#", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "SDIO_CD#", "",
+		"USB0_DRVVBUS", "USB1_DRVVBUS";
+
+	bootph-all;
+	status = "okay";
+};
+
+/* I2C_LOCAL */
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <100000>;
+	bootph-all;
+	status = "okay";
+
+	tps652g1: pmic@44 {
+		compatible = "ti,tps652g1";
+		reg = <0x44>;
+		ti,primary-pmic;
+		system-power-controller;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"LPM_EN#", "EN_3V3_S0", "POWER_BTN#", "CARRIER_STBY#",
+			"EN_0V75_0V85_VCORE_S0", "PMIC_WAKEUP";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupts-extended = <&main_gpio0 35 IRQ_TYPE_EDGE_FALLING>;
+
+		buck1-supply = <&vin_5p0>;
+		buck2-supply = <&vin_5p0>;
+		buck3-supply = <&vin_5p0>;
+		buck4-supply = <&vin_5p0>;
+		ldo1-supply = <&vin_5p0>;
+		ldo2-supply = <&vin_5p0>;
+		ldo3-supply = <&vin_5p0>;
+
+		bootph-all;
+
+		regulators {
+			vcc_0p85_s0: buck1 {
+				regulator-name = "V_0V85_S0";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_1p1_s3: buck2 {
+				regulator-name = "V_1V1_S3";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_1p8_s0: buck3 {
+				regulator-name = "V_1V8_S0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_1p2_s0: buck4 {
+				regulator-name = "V_1V2_S0";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_1p8_vda_pll_s0: ldo1 {
+				regulator-name = "V_1V8_VDA_PLL_S0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_1p8_s3: ldo2 {
+				regulator-name = "V_1V8_S3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_1p8_ret_s5: ldo3 {
+				regulator-name = "V_1V8_RET_S5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	system-controller@4a {
+		compatible = "kontron,sa67mcu", "kontron,sl28cpld";
+		reg = <0x4a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		watchdog@4 {
+			compatible = "kontron,sa67mcu-wdt", "kontron,sl28cpld-wdt";
+			reg = <0x4>;
+			kontron,assert-wdt-timeout-pin;
+		};
+
+		hwmon@8 {
+			compatible = "kontron,sa67mcu-hwmon";
+			reg = <0x8>;
+		};
+	};
+};
+
+/* I2C_CAM */
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_mux_pins_default>;
+
+		vdd-supply = <&vcc_1p8_s0>;
+		reset-gpios = <&main_gpio0 10 GPIO_ACTIVE_LOW>;
+
+		i2c_cam0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_cam1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_cam2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_cam3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+/* I2C_LCD */
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&main_pmx0 {
+	audio_refclk0_pins_default: audio-refclk0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0c4, PIN_OUTPUT, 5)	/* (W23) VOUT0_DATA3.AUDIO_EXT_REFCLK0 */
+		>;
+	};
+
+	audio_refclk1_pins_default: audio-refclk1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0a0, PIN_OUTPUT, 1)	/* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
+		>;
+	};
+
+	cpsw3g_mdio_pins_default: cpsw3g-mdio-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x160, PIN_OUTPUT, 0)	/* (AC24) MDIO0_MDC */
+			J722S_IOPAD(0x15c, PIN_INPUT, 0)	/* (AD25) MDIO0_MDIO */
+		>;
+	};
+
+	cpsw3g_pins_default: cpsw3g-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x1b8, PIN_OUTPUT, 1)	/* (C20) SPI0_CS1.CP_GEMAC_CPTS0_TS_COMP */
+		>;
+	};
+
+	edp_bridge_pins_default: edp-bridge-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x098, PIN_OUTPUT, 7)	/* (V21) GPMC0_WAIT0.GPIO0_37 */
+			J722S_IOPAD(0x09c, PIN_INPUT, 7)	/* (W26) GPMC0_WAIT1.GPIO0_38 */
+		>;
+	};
+
+	i2c_mux_pins_default: i2c-mux-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x028, PIN_OUTPUT, 7)	/* (M27) OSPI0_D7.GPIO0_10 */
+		>;
+	};
+
+	lcd0_backlight_pins_default: lcd0-backlight-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x074, PIN_OUTPUT, 7)	/* (V22) GPMC0_AD14.GPIO0_29 */
+			J722S_IOPAD(0x110, PIN_OUTPUT, 4)	/* (G27) MMC2_DAT1.EHRPWM1_A */
+		>;
+	};
+
+	lcd1_backlight_pins_default: lcd1-backlight-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x1c0, PIN_OUTPUT, 7)	/* (E19) SPI0_D0.GPIO1_18 */
+			J722S_IOPAD(0x114, PIN_OUTPUT, 4)	/* (G26) MMC2_DAT0.EHRPWM1_B */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x1e0, PIN_INPUT, 0)	/* (D23) I2C0_SCL */
+			J722S_IOPAD(0x1e4, PIN_INPUT, 0)	/* (B22) I2C0_SDA */
+		>;
+		bootph-all;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0b0, PIN_INPUT, 1)	/* (P22) GPMC0_CSn2.I2C2_SCL */
+			J722S_IOPAD(0x0b4, PIN_INPUT, 1)	/* (P23) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x1d0, PIN_INPUT, 2)	/* (E22) UART0_CTSn.I2C3_SCL */
+			J722S_IOPAD(0x1d4, PIN_INPUT, 2)	/* (B21) UART0_RTSn.I2C3_SDA */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0a8, PIN_INPUT, 1)	/* (R27) GPMC0_CSn0.I2C4_SCL */
+			J722S_IOPAD(0x0ac, PIN_INPUT, 1)	/* (P21) GPMC0_CSn1.I2C4_SDA */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x1c8, PIN_INPUT, 0)	/* (F19) UART0_RXD */
+			J722S_IOPAD(0x1cc, PIN_OUTPUT, 0)	/* (F20) UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	main_uart5_pins_default: main-uart5-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x108, PIN_INPUT, 3)	/* (J27) MMC2_DAT3.UART5_RXD */
+			J722S_IOPAD(0x10c, PIN_OUTPUT, 3)	/* (H27) MMC2_DAT2.UART5_TXD */
+			J722S_IOPAD(0x008, PIN_INPUT, 5)	/* (L22) OSPI0_DQS.UART5_CTSn */
+			J722S_IOPAD(0x004, PIN_OUTPUT, 5)	/* (L23) OSPI0_LBCLKO.UART5_RTSn */
+		>;
+	};
+
+	mcasp0_pins_default: mcasp0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x1a4, PIN_INPUT, 0)	/* (D25) MCASP0_ACLKX */
+			J722S_IOPAD(0x1a8, PIN_INPUT, 0)	/* (C26) MCASP0_AFSX */
+			J722S_IOPAD(0x1a0, PIN_INPUT, 0)	/* (F23) MCASP0_AXR0 */
+			J722S_IOPAD(0x19c, PIN_OUTPUT, 0)	/* (B25) MCASP0_AXR1 */
+		>;
+	};
+
+	mcasp2_pins_default: mcasp2-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x070, PIN_INPUT, 3)	/* (V24) GPMC0_AD13.MCASP2_ACLKX */
+			J722S_IOPAD(0x06c, PIN_INPUT, 3)	/* (V26) GPMC0_AD12.MCASP2_AFSX */
+			J722S_IOPAD(0x05c, PIN_INPUT, 3)	/* (U27) GPMC0_AD8.MCASP2_AXR0 */
+			J722S_IOPAD(0x060, PIN_OUTPUT, 3)	/* (U26) GPMC0_AD9.MCASP2_AXR1 */
+		>;
+	};
+
+	oldi0_pins_default: oldi0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x260, PIN_OUTPUT, 0)	/* (AF23) OLDI0_A0N */
+			J722S_IOPAD(0x25c, PIN_OUTPUT, 0)	/* (AG24) OLDI0_A0P */
+			J722S_IOPAD(0x268, PIN_OUTPUT, 0)	/* (AG22) OLDI0_A1N */
+			J722S_IOPAD(0x264, PIN_OUTPUT, 0)	/* (AG23) OLDI0_A1P */
+			J722S_IOPAD(0x270, PIN_OUTPUT, 0)	/* (AB20) OLDI0_A2N */
+			J722S_IOPAD(0x26c, PIN_OUTPUT, 0)	/* (AB21) OLDI0_A2P */
+			J722S_IOPAD(0x278, PIN_OUTPUT, 0)	/* (AG20) OLDI0_A3N */
+			J722S_IOPAD(0x274, PIN_OUTPUT, 0)	/* (AG21) OLDI0_A3P */
+			J722S_IOPAD(0x2a0, PIN_OUTPUT, 0)	/* (AF21) OLDI0_CLK0N */
+			J722S_IOPAD(0x29c, PIN_OUTPUT, 0)	/* (AE20) OLDI0_CLK0P */
+		>;
+	};
+
+	oldi1_pins_default: oldi1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x280, PIN_OUTPUT, 0)	/* (AD21) OLDI0_A4N */
+			J722S_IOPAD(0x27c, PIN_OUTPUT, 0)	/* (AC21) OLDI0_A4P */
+			J722S_IOPAD(0x288, PIN_OUTPUT, 0)	/* (AF19) OLDI0_A5N */
+			J722S_IOPAD(0x284, PIN_OUTPUT, 0)	/* (AF18) OLDI0_A5P */
+			J722S_IOPAD(0x290, PIN_OUTPUT, 0)	/* (AG17) OLDI0_A6N */
+			J722S_IOPAD(0x28c, PIN_OUTPUT, 0)	/* (AG18) OLDI0_A6P */
+			J722S_IOPAD(0x298, PIN_OUTPUT, 0)	/* (AB19) OLDI0_A7N */
+			J722S_IOPAD(0x294, PIN_OUTPUT, 0)	/* (AA20) OLDI0_A7P */
+			J722S_IOPAD(0x2a8, PIN_OUTPUT, 0)	/* (AD20) OLDI0_CLK1N */
+			J722S_IOPAD(0x2a4, PIN_OUTPUT, 0)	/* (AE19) OLDI0_CLK1P */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x000, PIN_OUTPUT, 0)	/* (L24) OSPI0_CLK */
+			J722S_IOPAD(0x02c, PIN_OUTPUT, 0)	/* (K26) OSPI0_CSn0 */
+			J722S_IOPAD(0x030, PIN_OUTPUT, 0)	/* (K23) OSPI0_CSn1 */
+			J722S_IOPAD(0x034, PIN_OUTPUT, 0)	/* (K22) OSPI0_CSn2 */
+			J722S_IOPAD(0x00c, PIN_INPUT, 0)	/* (K27) OSPI0_D0 */
+			J722S_IOPAD(0x010, PIN_INPUT, 0)	/* (L27) OSPI0_D1 */
+			J722S_IOPAD(0x014, PIN_INPUT, 0)	/* (L26) OSPI0_D2 */
+			J722S_IOPAD(0x018, PIN_INPUT, 0)	/* (L25) OSPI0_D3 */
+		>;
+		bootph-all;
+	};
+
+	pcie0_rc_pins_default: pcie0-rc-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x2ac, PIN_OUTPUT, 0)	/* (F25) PCIE0_CLKREQn */
+			J722S_IOPAD(0x1b4, PIN_OUTPUT, 7)	/* (B20) SPI0_CS0.GPIO1_15 */
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x090, PIN_INPUT, 7)	/* (P27) GPMC0_BE0n_CLE.GPIO0_35 */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x14c, PIN_INPUT, 0)	/* (AC25) RGMII1_RD0 */
+			J722S_IOPAD(0x150, PIN_INPUT, 0)	/* (AD27) RGMII1_RD1 */
+			J722S_IOPAD(0x154, PIN_INPUT, 0)	/* (AE24) RGMII1_RD2 */
+			J722S_IOPAD(0x158, PIN_INPUT, 0)	/* (AE26) RGMII1_RD3 */
+			J722S_IOPAD(0x148, PIN_INPUT, 0)	/* (AE27) RGMII1_RXC */
+			J722S_IOPAD(0x144, PIN_INPUT, 0)	/* (AD23) RGMII1_RX_CTL */
+			J722S_IOPAD(0x134, PIN_OUTPUT, 0)	/* (AF27) RGMII1_TD0 */
+			J722S_IOPAD(0x138, PIN_OUTPUT, 0)	/* (AE23) RGMII1_TD1 */
+			J722S_IOPAD(0x13c, PIN_OUTPUT, 0)	/* (AG25) RGMII1_TD2 */
+			J722S_IOPAD(0x140, PIN_OUTPUT, 0)	/* (AF24) RGMII1_TD3 */
+			J722S_IOPAD(0x130, PIN_OUTPUT, 0)	/* (AG26) RGMII1_TXC */
+			J722S_IOPAD(0x12c, PIN_OUTPUT, 0)	/* (AF25) RGMII1_TX_CTL */
+		>;
+	};
+
+	rgmii2_pins_default: rgmii2-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0f8, PIN_INPUT, 2)	/* (AB24) VOUT0_HSYNC.RGMII2_RD0 */
+			J722S_IOPAD(0x0fc, PIN_INPUT, 2)	/* (AC27) VOUT0_DE.RGMII2_RD1 */
+			J722S_IOPAD(0x100, PIN_INPUT, 2)	/* (AB23) VOUT0_VSYNC.RGMII2_RD2 */
+			J722S_IOPAD(0x104, PIN_INPUT, 2)	/* (AC26) VOUT0_PCLK.RGMII2_RD3 */
+			J722S_IOPAD(0x0f4, PIN_INPUT, 2)	/* (AB27) VOUT0_DATA15.RGMII2_RXC */
+			J722S_IOPAD(0x0f0, PIN_INPUT, 2)	/* (AB26) VOUT0_DATA14.RGMII2_RX_CTL */
+			J722S_IOPAD(0x0e0, PIN_OUTPUT, 2)	/* (AA25) VOUT0_DATA10.RGMII2_TD0 */
+			J722S_IOPAD(0x0e4, PIN_OUTPUT, 2)	/* (AB25) VOUT0_DATA11.RGMII2_TD1 */
+			J722S_IOPAD(0x0e8, PIN_OUTPUT, 2)	/* (AA23) VOUT0_DATA12.RGMII2_TD2 */
+			J722S_IOPAD(0x0ec, PIN_OUTPUT, 2)	/* (AA22) VOUT0_DATA13.RGMII2_TD3 */
+			J722S_IOPAD(0x0dc, PIN_OUTPUT, 2)	/* (AA27) VOUT0_DATA9.RGMII2_TXC */
+			J722S_IOPAD(0x0d8, PIN_OUTPUT, 2)	/* (AA24) VOUT0_DATA8.RGMII2_TX_CTL */
+		>;
+	};
+
+	rtc_pins_default: rtc-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x094, PIN_INPUT, 7)	/* (P26) GPMC0_BE1n.GPIO0_36 */
+		>;
+	};
+
+	sdhci1_pins_default: sdhci1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x23c, PIN_INPUT, 0)	/* (H22) MMC1_CMD */
+			J722S_IOPAD(0x234, PIN_OUTPUT, 0)	/* (H24) MMC1_CLK */
+			J722S_IOPAD(0x230, PIN_INPUT, 0)	/* (H23) MMC1_DAT0 */
+			J722S_IOPAD(0x22c, PIN_INPUT, 0)	/* (H20) MMC1_DAT1 */
+			J722S_IOPAD(0x228, PIN_INPUT, 0)	/* (J23) MMC1_DAT2 */
+			J722S_IOPAD(0x224, PIN_INPUT, 0)	/* (H25) MMC1_DAT3 */
+			J722S_IOPAD(0x240, PIN_INPUT, 0)	/* (B24) MMC1_SDCD */
+			J722S_IOPAD(0x244, PIN_INPUT, 0)	/* (A24) MMC1_SDWP */
+		>;
+		bootph-all;
+	};
+
+	usb0_connector_pins_default: usb0-connector-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x08c, PIN_INPUT_PULLUP, 7)	/* (N23) GPMC0_WEn.GPIO0_34 */
+		>;
+	};
+
+	usb1_pins_default: usb1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x258, PIN_OUTPUT, 0)	/* (B27) USB1_DRVVBUS */
+		>;
+	};
+
+	vcc_3p3_sd_s0_pins_default: vcc-3p3-sd-s0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x01c, PIN_OUTPUT, 7)	/* (L21) OSPI0_D4.GPIO0_7 */
+		>;
+		bootph-all;
+	};
+
+	vcc_3p3_sd_vio_s0_pins_default: vcc-3p3-sd-vio-s0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x020, PIN_OUTPUT, 7)	/* (M26) OSPI0_D5.GPIO0_8 */
+		>;
+		bootph-all;
+	};
+
+	vcc_3p3_cam_s0_pins_default: vcc-3p3-cam-s0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x1f0, PIN_OUTPUT, 7)	/* (A23) EXT_REFCLK1.GPIO1_30 */
+		>;
+	};
+
+	vcc_lcd0_panel_pins_default: vcc-lcd0-panel-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x078, PIN_OUTPUT, 7)	/* (V23) GPMC0_AD15.GPIO0_30 */
+		>;
+	};
+
+	vcc_lcd1_panel_pins_default: vcc-lcd1-panel-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x1c4, PIN_OUTPUT, 7)	/* (E20) SPI0_D1.GPIO1_19 */
+		>;
+	};
+
+	vcc_usb0_vbus_pins_default: vcc-usb0-vbus-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x254, PIN_OUTPUT, 7)	/* (E25) USB0_DRVVBUS.GPIO1_50 */
+		>;
+	};
+};
+
+/* SER1 */
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	bootph-all;
+	status = "okay";
+};
+
+/* SER2 */
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart5_pins_default>;
+	bootph-all;
+	status = "okay";
+};
+
+/* I2S0 */
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins_default>;
+	op-mode = <0>; /* I2S */
+	tdm-slots = <2>;
+	serial-dir = <2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0>;
+};
+
+/* I2S2 */
+&mcasp2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp2_pins_default>;
+	op-mode = <0>; /* I2S */
+	tdm-slots = <2>;
+	serial-dir = <2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0>;
+};
+
+/* CAN0 */
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	status = "okay";
+};
+
+/* CAN1 */
+&mcu_mcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "", "", "", "", /* 10 */ "GPIO12",
+		"MCU_INT#", "", "", "", "", "", "", "", "", "", "", "GPIO13";
+};
+
+/* I2C_GP */
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* SMARC Module EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&vcc_1p8_s0>;
+	};
+};
+
+&mcu_pmx0 {
+	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J722S_MCU_IOPAD(0x044, PIN_INPUT, 0)	/* (B13) MCU_I2C0_SCL */
+			J722S_MCU_IOPAD(0x048, PIN_INPUT, 0)	/* (E11) MCU_I2C0_SDA */
+		>;
+	};
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J722S_MCU_IOPAD(0x038, PIN_INPUT, 0)	/* (D8) MCU_MCAN0_RX */
+			J722S_MCU_IOPAD(0x034, PIN_OUTPUT, 0)	/* (B2) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J722S_MCU_IOPAD(0x040, PIN_INPUT, 0)	/* (B1) MCU_MCAN1_RX */
+			J722S_MCU_IOPAD(0x03c, PIN_OUTPUT, 0)	/* (C1) MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J722S_MCU_IOPAD(0x014, PIN_INPUT, 0)	/* (B8) MCU_UART0_RXD */
+			J722S_MCU_IOPAD(0x018, PIN_OUTPUT, 0)	/* (B4) MCU_UART0_TXD */
+			J722S_MCU_IOPAD(0x01c, PIN_INPUT, 0)	/* (B5) MCU_UART0_CTSn */
+			J722S_MCU_IOPAD(0x020, PIN_OUTPUT, 0)	/* (C5) MCU_UART0_RTSn */
+		>;
+		bootph-all;
+	};
+
+	mcu_spi0_pins_default: mcu-spi0-default-pins {
+		pinctrl-single,pins = <
+			J722S_MCU_IOPAD(0x008, PIN_OUTPUT, 0)	/* (A9) MCU_SPI0_CLK */
+			J722S_MCU_IOPAD(0x000, PIN_OUTPUT, 0)	/* (C12) MCU_SPI0_CS0 */
+			J722S_MCU_IOPAD(0x004, PIN_OUTPUT, 0)	/* (A10) MCU_SPI0_CS1 */
+			J722S_MCU_IOPAD(0x00c, PIN_INPUT, 0)	/* (B12) MCU_SPI0_D0 */
+			J722S_MCU_IOPAD(0x010, PIN_OUTPUT, 0)	/* (C11) MCU_SPI0_D1 */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J722S_MCU_IOPAD(0x024, PIN_INPUT, 0)	/* (B3) WKUP_UART0_RXD */
+			J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0)	/* (C8) WKUP_UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J722S_MCU_IOPAD(0x04c, PIN_INPUT, 0)	/* (B9) WKUP_I2C0_SCL */
+			J722S_MCU_IOPAD(0x050, PIN_INPUT, 0)	/* (D11) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+/* SPI0 */
+&mcu_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_spi0_pins_default>;
+};
+
+/* SER0 */
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+	bootph-all;
+	status = "okay";
+};
+
+/* QSPI0 */
+&ospi0 {
+	pinctrl-0 = <&ospi0_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+		m25p,fast-read;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <3>;
+		vcc-supply = <&vcc_1p8_s0>;
+		bootph-all;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x000000 0x400000>;
+				label = "failsafe bootloader";
+				read-only;
+			};
+		};
+
+		otp-1 {
+			compatible = "user-otp";
+
+			nvmem-layout {
+				compatible = "kontron,sa67-vpd", "kontron,sl28-vpd";
+
+				serial_number: serial-number {
+				};
+
+				base_mac_address: base-mac-address {
+					#nvmem-cell-cells = <1>;
+				};
+			};
+		};
+	};
+};
+
+&pcie0_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_rc_pins_default>;
+
+	/*
+	 * This is low active, but the driver itself is broken and already
+	 * inverts the logic.
+	 */
+	reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes1_pcie>;
+	phy-names = "pcie-phy";
+	status = "okay";
+};
+
+&sdhci0 {
+	disable-wp;
+	bootph-all;
+	ti,driver-strength-ohm = <50>;
+	status = "okay";
+};
+
+/* SDIO */
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhci1_pins_default>;
+	vmmc-supply = <&vcc_3p3_sd_s0>;
+	vqmmc-supply = <&vcc_3p3_sd_vio_s0>;
+	bootph-all;
+	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+	cd-debounce-delay-ms = <100>;
+	ti,fails-without-test-cd;
+	ti,driver-strength-ohm = <50>;
+	status = "okay";
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J722S_SERDES0_LANE0_USB>,
+		      <J722S_SERDES1_LANE0_PCIE0_LANE0>;
+};
+
+&serdes_wiz0 {
+	status = "okay";
+};
+
+&serdes_wiz1 {
+	status = "okay";
+};
+
+&serdes0 {
+	serdes0_usb3: phy@0 {
+		reg = <0>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 1>;
+		cdns,num-lanes = <1>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+	};
+};
+
+&serdes1 {
+	serdes1_pcie: phy@0 {
+		reg = <0>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz1 1>;
+		cdns,num-lanes = <1>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+	};
+};
+
+&usb0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	port {
+		usb0_hc: endpoint {
+			remote-endpoint = <&usb0_connector>;
+		};
+	};
+};
+
+&usb0_phy_ctrl {
+	/*
+	 * Keep this node in the SPL to be able to use the USB controller to
+	 * boot via DFU.
+	 */
+	bootph-all;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes0_usb3>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usbss1 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+/* I2C_PM */
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* SER3 */
+&wkup_uart0 {
+	/* WKUP UART0 is used by Device Manager firmware */
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	bootph-all;
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso
new file mode 100644
index 000000000000..5dfb0b8f10d2
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Second ethernet port GBE1.
+ *
+ * Copyright (c) 2025 Kontron Europe GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+&cpsw3g_mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port2 {
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&phy1>;
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso
new file mode 100644
index 000000000000..a6ae758e0b3a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * SMARC GPIOs.
+ *
+ * Copyright (c) 2025 Kontron Europe GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_gpio0_pins_default>;
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_gpio1_pins_default>;
+};
+
+&main_pmx0 {
+	main_gpio0_pins_default: main-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0d0, PIN_INPUT, 7)	/* (Y26) VOUT0_DATA6.GPIO0_51 */
+			J722S_IOPAD(0x0d4, PIN_INPUT, 7)	/* (Y27) VOUT0_DATA7.GPIO0_52 */
+			J722S_IOPAD(0x118, PIN_INPUT, 7)	/* (H26) MMC2_CLK.GPIO0_69 */
+			J722S_IOPAD(0x120, PIN_INPUT, 7)	/* (F27) MMC2_CMD.GPIO0_70 */
+		>;
+	};
+
+	main_gpio1_pins_default: main-gpio1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x194, PIN_INPUT, 7)	/* (A25) MCASP0_AXR3.GPIO1_7 */
+			J722S_IOPAD(0x198, PIN_INPUT, 7)	/* (A26) MCASP0_AXR2.GPIO1_8 */
+			J722S_IOPAD(0x1ac, PIN_INPUT, 7)	/* (C27) MCASP0_AFSR.GPIO1_13 */
+			J722S_IOPAD(0x1b0, PIN_INPUT, 7)	/* (F24) MCASP0_ACLKR.GPIO1_14 */
+			J722S_IOPAD(0x1d8, PIN_INPUT, 7)	/* (D22) MCAN0_TX.GPIO1_24 */
+			J722S_IOPAD(0x1dc, PIN_INPUT, 7)	/* (C22) MCAN0_RX.GPIO1_25 */
+			J722S_IOPAD(0x1e8, PIN_INPUT, 7)	/* (C24) I2C1_SCL.GPIO1_28 */
+			J722S_IOPAD(0x1ec, PIN_INPUT, 7)	/* (A22) I2C1_SDA.GPIO1_29 */
+		>;
+	};
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_gpio0_pins_default>;
+};
+
+&mcu_pmx0 {
+	mcu_gpio0_pins_default: mcu-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x02c, PIN_INPUT, 7)	/* (C4) WKUP_UART0_CTSn.MCU_GPIO0_11 */
+			J722S_IOPAD(0x084, PIN_INPUT, 7)	/* (F12) WKUP_CLKOUT0.MCU_GPIO0_23 */
+		>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso
new file mode 100644
index 000000000000..0a3e9f614c4c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Microcrystal RV8263 RTC variant.
+ *
+ * Copyright (c) 2025 Kontron Europe GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	aliases {
+		rtc0 = "/bus@f0000/i2c@20000000/rtc@51"; /* &rtc */
+		rtc1 = "/bus@f0000/bus@b00000/rtc@2b1f0000"; /* &wkup_rtc0 */
+	};
+};
+
+&main_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	rtc: rtc@51 {
+		compatible = "microcrystal,rv8263";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_pins_default>;
+		interrupts-extended = <&main_gpio0 36 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
new file mode 100644
index 000000000000..e221ccb30e95
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Dominik Haller <d.haller@phytec.de>
+ *
+ * https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy.h>
+#include "k3-am68-phycore-som.dtsi"
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "phytec,am68-phyboard-izar",
+		     "phytec,am68-phycore-som", "ti,j721s2";
+	model = "PHYTEC phyBOARD-Izar-AM68x";
+
+	aliases {
+		serial0 = &mcu_uart0;
+		serial1 = &main_uart1;
+		serial2 = &main_uart8;
+		serial3 = &main_uart2;
+		mmc1 = &main_sdhci1;
+		ethernet0 = &cpsw_port1;
+	};
+
+	chosen {
+		stdout-path = &main_uart8;
+	};
+
+	transceiver1: can-phy1 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+	};
+
+	transceiver2: can-phy2 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+	};
+
+	transceiver3: can-phy3 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+	};
+
+	transceiver4: can-phy4 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+	};
+
+	vcc_12v0: regulator-12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_IN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		/* Output of TLV7158P */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		/* Output of SiC431 */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_5v0>;
+	};
+
+	vcc_5v0: regulator-vcc-5v0 {
+		/* Output of LM5116 */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_12v0>;
+	};
+};
+
+&main_pmx0 {
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x04c, PIN_INPUT_PULLUP, 13) /* (V27) MCASP1_AXR1.I2C2_SCL */
+			J721S2_IOPAD(0x050, PIN_INPUT_PULLUP, 13) /* (W27) MCASP1_AXR2.I2C2_SDA */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) MCAN14_TX.I2C4_SCL */
+			J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) MCAN13_RX.I2C4_SDA */
+		>;
+	};
+
+	main_i2c5_pins_default: main-i2c5-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x01c, PIN_INPUT_PULLUP, 8) /* (Y24) MCAN15_TX.I2C5_SCL */
+			J721S2_IOPAD(0x018, PIN_INPUT_PULLUP, 8) /* (W23) MCAN14_RX.I2C5_SDA */
+		>;
+	};
+
+	main_gpio0_ioexp_intr_pins_default: main-gpio0-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */
+		>;
+	};
+
+	main_mcan1_pins_default: main-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0c8, PIN_INPUT, 4) /* (AD28) EXT_REFCLK1.MCAN1_RX */
+			J721S2_IOPAD(0x06c, PIN_OUTPUT, 0) /* (V26) MCAN1_TX */
+		>;
+	};
+
+	main_mcan13_pins_default: main-mcan13-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0ec, PIN_INPUT, 9) /* (AG25) TIMER_IO1.MCAN13_RX */
+			J721S2_IOPAD(0x00c, PIN_OUTPUT, 0) /* (AE28) MCAN13_TX */
+		>;
+	};
+
+	main_mcan16_pins_default: main-mcan16-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */
+			J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
+			J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
+			J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
+			J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
+			J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
+			J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
+			J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
+		>;
+		bootph-all;
+	};
+
+	main_spi6_pins_default: main-spi6-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x030, PIN_INPUT, 8) /* (T26) GPIO0_12.SPI6_CLK */
+			J721S2_IOPAD(0x080, PIN_INPUT, 8) /* (U26) MCASP0_AXR4.SPI6_CS2 */
+			J721S2_IOPAD(0x0c4, PIN_OUTPUT, 8) /* (AB26) ECAP0_IN_APWM_OUT.SPI6_D0 */
+			J721S2_IOPAD(0x074, PIN_INPUT, 8) /* (R28) MCAN2_TX.SPI6_D1 */
+			J721S2_IOPAD(0x0dc, PIN_OUTPUT, 7) /* (AH26) SPI0_D1.GPIO0_55 */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+			pinctrl-single,pins = <
+			J721S2_IOPAD(0x05c, PIN_INPUT, 11) /* (AA26) MCASP2_AXR0.UART1_CTSn */
+			J721S2_IOPAD(0x060, PIN_OUTPUT, 11) /* (AC27) MCASP2_AXR1.UART1_RTSn */
+			J721S2_IOPAD(0x054, PIN_INPUT, 11) /* (Y27) MCASP2_ACLKX.UART1_RXD */
+			J721S2_IOPAD(0x058, PIN_OUTPUT, 11) /* (AA27) MCASP2_AFSX.UART1_TXD */
+		>;
+	};
+
+	main_uart2_pins_default: main-uart2-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0d8, PIN_INPUT, 11) /* (AG26) SPI0_D0.UART2_RXD */
+			J721S2_IOPAD(0x068, PIN_OUTPUT, 11) /* (U28) MCAN0_RX.UART2_TXD */
+		>;
+	};
+
+	main_uart8_pins_default: main-uart8-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
+			J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
+		>;
+		bootph-all;
+	};
+};
+
+&wkup_pmx1 {
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
+			J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */
+			J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */
+			J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */
+			J721S2_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
+			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_i2c1_pins_default: mcu-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */
+			J721S2_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */
+		>;
+	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */
+			J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
+			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_spi0_pins_default: mcu-spi0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x038, PIN_INPUT, 0) /* (B27) MCU_SPI0_CLK */
+			J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B26) MCU_SPI0_CS0 */
+			J721S2_WKUP_IOPAD(0x068, PIN_INPUT, 2) /* (C23) WKUP_GPIO0_4.MCU_SPI0_CS3 */
+			J721S2_WKUP_IOPAD(0x03c, PIN_INPUT, 0) /* (D24) MCU_SPI0_D0 */
+			J721S2_WKUP_IOPAD(0x040, PIN_INPUT, 0) /* (B25) MCU_SPI0_D1 */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
+		>;
+		bootph-all;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+&i2c_som_rtc {
+	trickle-resistor-ohms = <3000>;
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	status = "okay";
+
+	exp1: gpio@20 {
+		compatible = "nxp,pca9672";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HALF/nFULL_EN", "RS485/nRS232_EN", "MCU_ETH_nRESET", "",
+				"PCIe_nRESET", "USB2.0-Hub_nRESET", "USB3.0-Hub_nRESET", "PEB_AV_BL_EN";
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RPI_GPIO4", "RPI_GPIO5", "RPI_GPIO6", "RPI_GPIO19",
+				"RPI_GPIO20", "RPI_GPIO21", "RPI_GPIO22", "RPI_GPIO23",
+				"RPI_GPIO24", "RPI_GPIO25", "RPI_GPIO26", "RPI_GPIO20",
+				"LVDS_BL_nEN", "LVDS_REG_nEN", "CSI_CAM0_nRESET", "CSI_CAM1_nRESET",
+				"CSI0_CTRL1", "CSI0_CTRL2", "CSI0_CTRL3", "CSI0_CTRL4",
+				"CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3", "CSI1_CTRL4";
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio0_ioexp_intr_pins_default>;
+	};
+};
+
+/* CSI0 + RPI */
+&main_i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+};
+
+/* CSI1 + PCIe */
+&main_i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+};
+
+&main_mcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan1_pins_default>;
+	phys = <&transceiver1>;
+	status = "okay";
+};
+
+&main_mcan13 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan13_pins_default>;
+	phys = <&transceiver2>;
+	status = "okay";
+};
+
+&main_mcan16 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan16_pins_default>;
+	phys = <&transceiver3>;
+	status = "okay";
+};
+
+/* SD-Card */
+&main_sdhci1 {
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&main_spi6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi6_pins_default>;
+	cs-gpios = <&main_gpio0 55 GPIO_ACTIVE_LOW>;
+	ti,spi-num-cs = <1>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&main_uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart2_pins_default>;
+	status = "okay";
+};
+
+&main_uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+	/* Shared with TFA on this platform */
+	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
+	bootph-all;
+	status = "okay";
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+	status = "okay";
+};
+
+&mcu_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c1_pins_default>;
+	status = "okay";
+};
+
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver4>;
+	status = "okay";
+};
+
+/* RPI-Header */
+&mcu_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_spi0_pins_default>;
+};
+
+/* RPI-Header */
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&ospi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+	};
+};
+
+&pcie1_rc {
+	num-lanes = <1>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	reset-gpios = <&exp1 4 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>,
+		      <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>;
+};
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	status = "okay";
+
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 1>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+	};
+
+	serdes0_usb_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 2>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+	};
+};
+
+&tscadc0 {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <3 4 5 6 7>;
+	};
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&usb_serdes_mux {
+	idle-states = <1>; /* USB0 to SERDES lane 1 */
+};
+
+&wkup_i2c0 {
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			label = "user-led1";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			label = "user-led2";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			label = "user-led3";
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+/* Shared with TIFS */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	bootph-all;
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
new file mode 100644
index 000000000000..0ff511028f81
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Dominik Haller <d.haller@phytec.de>
+ *
+ * https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-j721s2.dtsi"
+
+/ {
+	compatible = "phytec,am68-phycore-som", "ti,j721s2";
+	model = "PHYTEC phyCORE-AM68x";
+
+	aliases {
+		ethernet1 = &main_cpsw_port1;
+		mmc0 = &main_sdhci0;
+		rtc0 = &i2c_som_rtc;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4GB RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+		bootph-all;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global cma region */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00 0x20000000>;
+			linux,cma-default;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+	};
+
+	vdd_sd_dv: regulator-sd {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "VDD_SD_DV";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpios = <&main_gpio0 1 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0x0>,
+			 <1800000 0x1>;
+	};
+};
+
+&main_pmx0 {
+	main_cpsw_mdio_pins_default: main-cpsw-mdio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0c0, PIN_OUTPUT, 6) /* (T28) MCASP1_AXR0.MDIO0_MDC */
+			J721S2_IOPAD(0x0bc, PIN_INPUT, 6) /* (V28) MCASP1_AFSX.MDIO0_MDIO */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */
+			J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0b8, PIN_INPUT, 6) /* (AA24) MCASP1_ACLKX.RGMII1_RD0 */
+			J721S2_IOPAD(0x0a0, PIN_INPUT, 6) /* (AB25) MCASP0_AXR12.RGMII1_RD1 */
+			J721S2_IOPAD(0x0a4, PIN_INPUT, 6) /* (T23) MCASP0_AXR13.RGMII1_RD2 */
+			J721S2_IOPAD(0x0a8, PIN_INPUT, 6) /* (U24) MCASP0_AXR14.RGMII1_RD3 */
+			J721S2_IOPAD(0x0b0, PIN_INPUT, 6) /* (AD26) MCASP1_AXR3.RGMII1_RXC */
+			J721S2_IOPAD(0x0ac, PIN_INPUT, 6) /* (AC25) MCASP0_AXR15.RGMII1_RX_CTL */
+			J721S2_IOPAD(0x08c, PIN_OUTPUT, 6) /* (T25) MCASP0_AXR7.RGMII1_TD0 */
+			J721S2_IOPAD(0x090, PIN_OUTPUT, 6) /* (W24) MCASP0_AXR8.RGMII1_TD1 */
+			J721S2_IOPAD(0x094, PIN_OUTPUT, 6) /* (AA25) MCASP0_AXR9.RGMII1_TD2 */
+			J721S2_IOPAD(0x098, PIN_OUTPUT, 6) /* (V25) MCASP0_AXR10.RGMII1_TD3 */
+			J721S2_IOPAD(0x0b4, PIN_OUTPUT, 6) /* (U25) MCASP1_AXR4.RGMII1_TXC */
+			J721S2_IOPAD(0x09c, PIN_OUTPUT, 6) /* (T24) MCASP0_AXR11.RGMII1_TX_CTL */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x004, PIN_OUTPUT, 7) /* (W25) MCAN12_TX.GPIO0_1 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
+			J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
+			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */
+			J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */
+		>;
+		bootph-all;
+	};
+};
+
+&wkup_pmx1 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x098, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x09c, PIN_INPUT_PULLUP, 0) /* (H27) WKUP_I2C0_SDA */
+		>;
+		bootph-all;
+	};
+};
+
+&main_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>;
+	status = "okay";
+};
+
+&main_cpsw_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_cpsw_mdio_pins_default>;
+	status = "okay";
+
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+&main_cpsw_port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+	};
+
+	i2c_som_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+/* eMMC */
+&main_sdhci0 {
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	bootph-all;
+	status = "okay";
+};
+
+/* SD card */
+&main_sdhci1 {
+	vqmmc-supply = <&vdd_sd_dv>;
+	bootph-all;
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+	status = "okay";
+
+	serial_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+		bootph-all;
+	};
+};
+
+&wkup_gpio0 {
+	status = "okay";
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu_avs: regulator@40 {
+		compatible = "ti,tps62873";
+		reg = <0x40>;
+		regulator-name = "VDD_CPU_AVS";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <900000>;
+		regulator-boot-on;
+		regulator-always-on;
+		bootph-pre-ram;
+	};
+
+	pmic: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck12-supply = <&vcc_3v3>;
+		buck3-supply = <&vcc_3v3>;
+		buck4-supply = <&vcc_3v3>;
+		buck5-supply = <&vcc_3v3>;
+		ldo1-supply = <&vcc_3v3>;
+		ldo2-supply = <&vcc_3v3>;
+		ldo3-supply = <&vcc_3v3>;
+		ldo4-supply = <&vcc_3v3>;
+		ti,primary-pmic;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "VDD_DDR_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "VDD_RAM_0V85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "VDD_IO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "VDD_MCU_0V85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "VDD_MCUIO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "VDD_MCUIO_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "VDDA_DLL_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "VDDA_MCU_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		bootph-all;
+	};
+
+	som_eeprom_opt: eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+#include "k3-j721s2-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso
new file mode 100644
index 000000000000..ba521d661144
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * AM68-SK board.
+ *
+ * AM68-SK Board Product Link: https://www.ti.com/tool/SK-AM68
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 11522b36e0ce..88f202f266c6 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -44,6 +44,17 @@
 		regulator-boot-on;
 	};
 
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vsys_3v3: regulator-vsys3v3 {
 		/* Output of LM5141 */
 		compatible = "regulator-fixed";
@@ -76,7 +87,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
-		vin-supply = <&vsys_3v3>;
+		vin-supply = <&vsys_5v0>;
 		gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
@@ -124,6 +135,34 @@
 		max-bitrate = <5000000>;
 	};
 
+	edp0_refclk: clock-edp0-refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+		#clock-cells = <0>;
+	};
+
+	dp0_pwr_3v3: regulator-dp0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "dp0-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;     /*P0 - DP0_3V3 _EN */
+		enable-active-high;
+	};
+
+	dp0: dp0-connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp0_pwr_3v3>;
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+
 	connector-hdmi {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -333,6 +372,7 @@
 			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
 			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	mcu_mdio_pins_default: mcu-mdio-default-pins {
@@ -340,6 +380,7 @@
 			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
 			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
@@ -401,6 +442,14 @@
 	};
 };
 
+&cpsw_mac_syscon {
+	bootph-all;
+};
+
+&phy_gmii_sel {
+	bootph-all;
+};
+
 &main_gpio0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -594,6 +643,39 @@
 		gpio-line-names = "HDMI_PDn","HDMI_LS_OE",
 				  "DP0_3V3_EN","eDP_ENABLE";
 	};
+
+	bridge_dsi_edp: bridge-dsi-edp@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		clock-names = "refclk";
+		clocks = <&edp0_refclk>;
+		enable-gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
+		vpll-supply = <&vsys_io_1v8>;
+		vccio-supply = <&vsys_io_1v8>;
+		vcca-supply = <&vsys_io_1v2>;
+		vcc-supply = <&vsys_io_1v2>;
+
+		dsi_edp_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp0_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				dp0_out: endpoint {
+					remote-endpoint = <&dp0_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &main_sdhci1 {
@@ -610,11 +692,13 @@
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+	status = "okay";
 };
 
 &davinci_mdio {
 	phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
@@ -622,8 +706,9 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy0>;
+	bootph-all;
 };
 
 &mcu_mcan0 {
@@ -688,6 +773,15 @@
 			remote-endpoint = <&tfp410_in>;
 		};
 	};
+
+	/* DSI */
+	port@2 {
+		reg = <2>;
+
+		dpi0_out: endpoint {
+			remote-endpoint = <&dsi0_in>;
+		};
+	};
 };
 
 &serdes_ln_ctrl {
@@ -745,3 +839,30 @@
 	phys = <&serdes0_usb_link>;
 	phy-names = "cdns3,usb3-phy";
 };
+
+&dphy_tx0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+};
+
+&dsi0_ports {
+
+	port@0 {
+		reg = <0>;
+
+		dsi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dsi0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
index 4ca2d4e2fb9b..6a6dc816b658 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
@@ -27,107 +27,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_1_dma_memory_region: c71-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_1_memory_region: c71-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a8000000 {
-			reg = <0x00 0xa8000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 };
 
@@ -235,141 +145,4 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_1: mbox-c71-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer3 {
-	status = "reserved";
-};
-
-&main_timer4 {
-	status = "reserved";
-};
-
-&main_timer5 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
-
-&c71_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
-	memory-region = <&c71_1_dma_memory_region>,
-			<&c71_1_memory_region>;
-};
+#include "k3-j721s2-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
new file mode 100644
index 000000000000..55fd214a82e4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69
+ * https://www.toradex.com/products/carrier-board/clover
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "k3-am69-aquila.dtsi"
+
+/ {
+	model = "Toradex Aquila AM69 on Clover Board";
+	compatible = "toradex,aquila-am69-clover",
+		     "toradex,aquila-am69",
+		     "ti,j784s4";
+
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	reg_3v3_dp: regulator-3v3-dp {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_21_dp>;
+		/* Aquila GPIO_21_DP (AQUILA B57) */
+		gpio = <&main_gpio0 37 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "DP_3V3";
+		startup-delay-us = <10000>;
+	};
+
+	/* Aquila DP_1 */
+	dp-connector {
+		compatible = "dp-connector";
+		dp-pwr-supply = <&reg_3v3_dp>;
+		label = "Display Port";
+		type = "full-size";
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+};
+
+/* On-module ETH_1 MDIO */
+&davinci_mdio {
+	status = "okay";
+};
+
+&dp0_ports {
+	port@4 {
+		reg = <4>;
+		dp0_out: endpoint {
+			remote-endpoint = <&dp_connector_in>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+&main0_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&main0_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&main0_alert1>;
+		};
+	};
+};
+
+&main1_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&main1_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&main1_alert1>;
+		};
+	};
+};
+
+&main2_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&main2_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&main2_alert1>;
+		};
+	};
+};
+
+&main3_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&main3_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&main3_alert1>;
+		};
+	};
+};
+
+&main4_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&main4_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&main4_alert1>;
+		};
+	};
+};
+
+/* Aquila ETH_2 */
+&main_cpsw0 {
+	status = "okay";
+};
+
+/* Aquila ETH_2 SGMII PHY */
+&main_cpsw0_port8  {
+	phy-handle = <&cpsw0_port8_phy4>;
+	status = "okay";
+};
+
+/* Aquila ETH_2_XGMII_MDIO */
+&main_cpsw0_mdio {
+	status = "okay";
+
+	cpsw0_port8_phy4: ethernet-phy@4 {
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth2_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+/* Aquila PWM_1 */
+&main_ehrpwm0 {
+	status = "okay";
+};
+
+/* Aquila PWM_2 */
+&main_ehrpwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_01>, /* Aquila GPIO_01 */
+		    <&pinctrl_gpio_02>, /* Aquila GPIO_02 */
+		    <&pinctrl_gpio_03>; /* Aquila GPIO_03 */
+};
+
+/* Aquila I2C_6 */
+&main_i2c5 {
+	status = "okay";
+};
+
+/* Aquila CAN_1 */
+&main_mcan10 {
+	status = "okay";
+};
+
+/* Aquila CAN_3 */
+&main_mcan13 {
+	status = "okay";
+};
+
+/* Aquila SD_1 */
+&main_sdhci1 {
+	status = "okay";
+};
+
+/* Aquila SPI_2 */
+&main_spi0 {
+	status = "okay";
+};
+
+/* Aquila SPI_1 */
+&main_spi2 {
+	pinctrl-0 = <&pinctrl_main_spi2>,
+		    <&pinctrl_main_spi2_cs0>,
+		    <&pinctrl_gpio_05>;
+	cs-gpios = <0>, <&wkup_gpio0 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_06>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* Aquila UART_1 */
+&main_uart4 {
+	status = "okay";
+};
+
+/* Aquila UART_3, used as the Linux console */
+&main_uart8 {
+	status = "okay";
+};
+
+&mcu_cpsw {
+	status = "okay";
+};
+
+/* On-module ETH_1 RGMII */
+&mcu_cpsw_port1 {
+	status = "okay";
+};
+
+/* Aquila I2C_1 */
+&mcu_i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	fan_controller: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#pwm-cells = <2>;
+
+		fan: fan {
+			cooling-levels = <102 179 255>;
+			#cooling-cells = <2>;
+			pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+		};
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* USB-C OTG (TCPC USB PD PHY) */
+	tcpc@52 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C OTG";
+			power-role = "dual";
+			try-power-role = "sink";
+			self-powered;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <1000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_con_hs: endpoint {
+						remote-endpoint = <&usb0_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_con_ss: endpoint {
+						remote-endpoint = <&usb0_ss_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Aquila I2C_2 */
+&mcu_i2c1 {
+	status = "okay";
+};
+
+/* Aquila CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Aquila CAN_4 */
+&mcu_mcan1 {
+	status = "okay";
+};
+
+/* Aquila UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+&mhdp {
+	status = "okay";
+};
+
+/* Aquila QSPI_1 */
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_ospi0_4bit>, <&pinctrl_mcu_ospi0_cs0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		cdns,read-delay = <0>;
+		cdns,tchsh-ns = <3>;
+		cdns,tsd2d-ns = <10>;
+		cdns,tshsl-ns = <30>;
+		cdns,tslch-ns = <8>;
+	};
+};
+
+/* Aquila PCIE_1 */
+&pcie0_rc {
+	status = "okay";
+};
+
+/* Aquila PCIE_2 */
+&pcie1_rc {
+	status = "okay";
+};
+
+&serdes2 {
+	status = "okay";
+};
+
+&serdes4 {
+	status = "okay";
+};
+
+&serdes_wiz2 {
+	status = "okay";
+};
+
+&serdes_wiz4 {
+	status = "okay";
+};
+
+/* Aquila ADC_[1-4] */
+&tscadc0 {
+	status = "okay";
+};
+
+&usbss0 {
+	status = "okay";
+};
+
+&usb0ss_mux {
+	status = "okay";
+
+	port {
+		usb0_ss_mux: endpoint {
+			remote-endpoint = <&usb_1_con_ss>;
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+
+	port {
+		usb0_hs: endpoint {
+			remote-endpoint = <&usb_1_con_hs>;
+		};
+	};
+};
+
+&wkup0_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&wkup0_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&wkup0_alert1>;
+		};
+	};
+};
+
+&wkup1_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&wkup1_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&wkup1_alert1>;
+		};
+	};
+};
+
+&wkup_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_04>; /* Aquila GPIO_04 */
+};
+
+/* Aquila UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts b/arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts
new file mode 100644
index 000000000000..c7ce804eac70
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69
+ * https://www.toradex.com/products/carrier-board/aquila-development-board-kit
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "k3-am69-aquila.dtsi"
+
+/ {
+	model = "Toradex Aquila AM69 on Aquila Development Board";
+	compatible = "toradex,aquila-am69-dev",
+		     "toradex,aquila-am69",
+		     "ti,j784s4";
+
+	aliases {
+		eeprom1 = &carrier_eeprom;
+	};
+
+	reg_1v8_sw: regulator-1v8-sw {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "Carrier_1V8";
+	};
+
+	reg_3v3_dp: regulator-3v3-dp {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_21_dp>;
+		/* Aquila GPIO_21_DP (AQUILA B57) */
+		gpio = <&main_gpio0 37 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "DP_3V3";
+		startup-delay-us = <10000>;
+	};
+
+	dp0-connector {
+		compatible = "dp-connector";
+		dp-pwr-supply = <&reg_3v3_dp>;
+		label = "Display Port";
+		type = "full-size";
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "aquila-wm8904";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack",
+			"IN1R", "Digital Mic";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Microphone", "Digital Mic",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp4>;
+		};
+	};
+};
+
+/* Aquila CTRL_PWR_BTN_MICO# */
+&aquila_key_power {
+	status = "okay";
+};
+
+/* Aquila CTRL_WAKE1_MICO# */
+&aquila_key_wake {
+	status = "okay";
+};
+
+/* On-module ETH_1 MDIO */
+&davinci_mdio {
+	status = "okay";
+};
+
+&dp0_ports {
+	port@4 {
+		reg = <4>;
+		dp0_out: endpoint {
+			remote-endpoint = <&dp0_connector_in>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+&main0_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&main0_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&main0_alert1>;
+		};
+	};
+};
+
+&main1_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&main1_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&main1_alert1>;
+		};
+	};
+};
+
+&main2_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&main2_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&main2_alert1>;
+		};
+	};
+};
+
+&main3_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&main3_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&main3_alert1>;
+		};
+	};
+};
+
+&main4_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&main4_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&main4_alert1>;
+		};
+	};
+};
+
+/* Aquila ETH_2 */
+&main_cpsw0 {
+	status = "okay";
+};
+
+/* Aquila ETH_2 SGMII PHY */
+&main_cpsw0_port8 {
+	phy-handle = <&cpsw0_port8_phy4>;
+	status = "okay";
+};
+
+/* Aquila ETH_2_XGMII_MDIO */
+&main_cpsw0_mdio {
+	status = "okay";
+
+	cpsw0_port8_phy4: ethernet-phy@4 {
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth2_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+/* Aquila PWM_1 */
+&main_ehrpwm0 {
+	status = "okay";
+};
+
+/* Aquila PWM_4_DP */
+&main_ehrpwm2 {
+	status = "okay";
+};
+
+/* Aquila PWM_2 */
+&main_ehrpwm1 {
+	status = "okay";
+};
+
+/* Aquila PWM_3_DSI */
+&main_ehrpwm5 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_01>,  /* Aquila GPIO_01 */
+		    <&pinctrl_gpio_02>,  /* Aquila GPIO_02 */
+		    <&pinctrl_gpio_03>;  /* Aquila GPIO_03 */
+};
+
+/* Aquila I2C_3_DSI1 */
+&main_i2c0 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* I2C on DSI Connector Pin #4 and #6 */
+		i2c_dsi_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* I2C on DSI Connector Pin #52 and #54 */
+		i2c_dsi_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* Aquila I2C_4_CSI1 */
+&main_i2c1 {
+	status = "okay";
+};
+
+/* Aquila I2C_5_CSI2 */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Aquila I2C_6 */
+&main_i2c5 {
+	status = "okay";
+};
+
+/* Aquila CAN_1 */
+&main_mcan10 {
+	status = "okay";
+};
+
+/* Aquila CAN_3 */
+&main_mcan13 {
+	status = "okay";
+};
+
+/* Aquila SD_1 */
+&main_sdhci1 {
+	status = "okay";
+};
+
+/* Aquila SPI_2 */
+&main_spi0 {
+	status = "okay";
+};
+
+/* Aquila SPI_1 */
+&main_spi2 {
+	status = "okay";
+};
+
+/* Aquila UART_1 */
+&main_uart4 {
+	status = "okay";
+};
+
+/* Aquila UART_3, used as the Linux console */
+&main_uart8 {
+	status = "okay";
+};
+
+/* Aquila I2S_1 */
+&mcasp4 {
+	status = "okay";
+};
+
+&mcu_cpsw {
+	status = "okay";
+};
+
+/* On-module ETH_1 RGMII */
+&mcu_cpsw_port1 {
+	status = "okay";
+};
+
+/* Aquila I2C_1 */
+&mcu_i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	fan_controller: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#pwm-cells = <2>;
+
+		fan: fan {
+			cooling-levels = <102 179 255>;
+			#cooling-cells = <2>;
+			pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
+		};
+	};
+
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audio_extrefclk1>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_refclk1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_1v8_sw>;
+		CPVDD-supply = <&reg_1v8_sw>;
+		DBVDD-supply = <&reg_1v8_sw>;
+		DCVDD-supply = <&reg_1v8_sw>;
+		MICVDD-supply = <&reg_1v8_sw>;
+
+		wlf,drc-cfg-names = "default", "peaklimiter";
+		/*
+		 * Config registers per name, respectively:
+		 * KNEE_IP = 0,   KNEE_OP = 0,     HI_COMP = 1,   LO_COMP = 1
+		 * KNEE_IP = -24, KNEE_OP = -6,    HI_COMP = 1/4, LO_COMP = 1
+		 */
+		wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
+				   /bits/ 16 <0x04af 0x324b 0x0010 0x0408>;
+
+		/* GPIO1 = DMIC_CLK, don't touch others */
+		wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;
+
+		wlf,in1r-as-dmicdat2;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@41 {
+		compatible = "ti,ina226";
+		reg = <0x41>;
+		shunt-resistor = <5000>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* USB-C OTG (TCPC USB PD PHY) */
+	tcpc@52 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C OTG";
+			power-role = "dual";
+			try-power-role = "sink";
+			self-powered;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <1000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_con_hs: endpoint {
+						remote-endpoint = <&usb0_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_con_ss: endpoint {
+						remote-endpoint = <&usb0_ss_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	carrier_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Aquila I2C_2 */
+&mcu_i2c1 {
+	status = "okay";
+};
+
+/* Aquila CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Aquila CAN_4 */
+&mcu_mcan1 {
+	status = "okay";
+};
+
+/* Aquila UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+&mhdp {
+	status = "okay";
+};
+
+/* Aquila QSPI_1 */
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_ospi0_4bit>, <&pinctrl_mcu_ospi0_cs0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		cdns,read-delay = <0>;
+		cdns,tchsh-ns = <3>;
+		cdns,tsd2d-ns = <10>;
+		cdns,tshsl-ns = <30>;
+		cdns,tslch-ns = <8>;
+	};
+};
+
+/* Aquila PCIE_1 */
+&pcie0_rc {
+	status = "okay";
+};
+
+/* Aquila PCIE_2 */
+&pcie1_rc {
+	status = "okay";
+};
+
+&serdes2 {
+	status = "okay";
+};
+
+&serdes4 {
+	status = "okay";
+};
+
+&serdes_wiz2 {
+	status = "okay";
+};
+
+&serdes_wiz4 {
+	status = "okay";
+};
+
+/* Aquila ADC_[1-4] */
+&tscadc0 {
+	status = "okay";
+};
+
+&usbss0 {
+	status = "okay";
+};
+
+&usb0ss_mux {
+	status = "okay";
+
+	port {
+		usb0_ss_mux: endpoint {
+			remote-endpoint = <&usb_1_con_ss>;
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+
+	port {
+		usb0_hs: endpoint {
+			remote-endpoint = <&usb_1_con_hs>;
+		};
+	};
+};
+
+&wkup0_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&wkup0_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&wkup0_alert1>;
+		};
+	};
+};
+
+&wkup1_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan 1 1>;
+			trip = <&wkup1_alert0>;
+		};
+
+		map1 {
+			cooling-device = <&fan 2 2>;
+			trip = <&wkup1_alert1>;
+		};
+	};
+};
+
+&wkup_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_04>,       /* Aquila GPIO_04 */
+		    <&pinctrl_gpio_05>,       /* Aquila GPIO_05 */
+		    <&pinctrl_gpio_06>,       /* Aquila GPIO_06 */
+		    <&pinctrl_gpio_07>,       /* Aquila GPIO_07 */
+		    <&pinctrl_gpio_08>;       /* Aquila GPIO_08 */
+};
+
+/* Aquila UART_2, through RS485 transceiver */
+&wkup_uart0 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
new file mode 100644
index 000000000000..0866eb8a6f34
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
@@ -0,0 +1,1840 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2025 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/usb/pd.h>
+#include "k3-j784s4.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		can0 = &main_mcan10;
+		can1 = &mcu_mcan0;
+		can2 = &main_mcan13;
+		can3 = &mcu_mcan1;
+		eeprom0 = &som_eeprom;
+		ethernet0 = &mcu_cpsw_port1;
+		ethernet1 = &main_cpsw0_port8;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &mcu_i2c1;
+		i2c3 = &main_i2c0;
+		i2c4 = &main_i2c1;
+		i2c5 = &main_i2c2;
+		i2c6 = &main_i2c5;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		rtc0 = &rtc_i2c;
+		serial0 = &main_uart4;
+		serial1 = &wkup_uart0;
+		serial2 = &main_uart8;
+		serial3 = &mcu_uart0;
+		usb0 = &usb0;
+	};
+
+	aquila_key_power: gpio-key-power {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwr_btn_int>;
+		status = "disabled";
+
+		key-power {
+			/* Aquila CTRL_PWR_BTN_MICO# (AQUILA B93) */
+			gpios = <&wkup_gpio0 36 GPIO_ACTIVE_LOW>;
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	aquila_key_wake: gpio-key-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_wake1_mico>;
+		status = "disabled";
+
+		key-wakeup {
+			/* Aquila CTRL_WAKE1_MICO# (AQUILA D6) */
+			gpios = <&wkup_gpio0 49 GPIO_ACTIVE_LOW>;
+			label = "Wake Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	/* Aquila CTRL_RESET_MICO# (AQUILA B92) */
+	gpio-restart {
+		compatible = "gpio-restart";
+		/* COLD_RESET_REQ */
+		gpios = <&som_gpio_expander 1 GPIO_ACTIVE_HIGH>;
+		priority = <192>;
+	};
+
+	/* PWR_DOWN_REQ */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		/* PWR_DOWN_REQ */
+		gpios = <&som_gpio_expander 2 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <3000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 32G RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x07 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+	};
+
+	/* Module Power Supply (VCC) */
+	reg_vin: regulator-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "+V_IN";
+	};
+
+	/* Enabled by EN_3V3_VIO (PMIC_GPIO_9) */
+	reg_1v1_usb_bridge: regulator-1v1-vio {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1100000>;
+		regulator-min-microvolt = <1100000>;
+		regulator-name = "+V1.1_VIO";
+		vin-supply = <&reg_vin>;
+	};
+
+	reg_3v3_wifi: regulator-3v3-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_en_3v3_wifi>;
+		gpio = <&wkup_gpio0 57 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_WIFI";
+		startup-delay-us = <20000>;
+		vin-supply = <&reg_vin>;
+	};
+
+	reg_1v8_stby: regulator-1v8-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_STBY";
+		vin-supply = <&reg_vin>;
+	};
+
+	/* Aquila SD_1_PWR_EN */
+	reg_sdhc1_vmmc: regulator-sdhci1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd1_pwr_en>;
+		/* Aquila SD_1_PWR_EN (AQUILA A6) */
+		gpio = <&main_gpio0 52 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+3V3_SD";
+		startup-delay-us = <20000>;
+	};
+
+	reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc {
+		compatible = "regulator-gpio";
+		/* SDIO_PWR_SEL_3.3V */
+		gpios = <&som_gpio_expander 7 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+VDD_SD_DV";
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	/* On-module USB_1_SS mux */
+	usb0ss_mux: gpio-sbu-mux {
+		compatible = "ti,tmuxhs4212", "gpio-sbu-mux";
+		orientation-switch;
+		/* USB_MUX_SEL */
+		select-gpios = <&som_gpio_expander 0 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&main_pmx0 {
+	/* Aquila DP_1_HPD */
+	pinctrl_main_dp0_hpd: main-dp0-hpd-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x014, PIN_INPUT, 13) /* (AG33) MCAN14_TX.DP0_HPD */ /* AQUILA B59 */
+		>;
+	};
+
+	/* Aquila PWM_1 */
+	pinctrl_main_ehrpwm0_b: main-ehrpwm0b-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x064, PIN_OUTPUT, 9) /* (AF38) MCAN0_TX.EHRPWM0_B */ /* AQUILA C25 */
+		>;
+	};
+
+	/* Aquila PWM_2 */
+	pinctrl_main_ehrpwm1_a: main-ehrpwm1a-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x060, PIN_OUTPUT, 9) /* (AE36) MCASP2_AXR1.EHRPWM1_A */ /* AQUILA C26 */
+		>;
+	};
+
+	/* Aquila PWM_3_DSI */
+	pinctrl_main_ehrpwm5_a: main-ehrpwm5a-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x084, PIN_OUTPUT, 9) /* (AG38) MCASP0_AXR5.EHRPWM5_A */ /* AQUILA B46 */
+		>;
+	};
+
+	/* Aquila PWM_4_DP */
+	pinctrl_main_ehrpwm2_a: main-ehrpwm2a-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x040, PIN_INPUT, 9) /* (AF37) MCASP0_AXR0.EHRPWM2_A */ /* AQUILA B58 */
+		>;
+	};
+
+	/* PMIC_INT# */
+	pinctrl_pmic_int: main-gpio0-0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTn.GPIO0_0 */
+		>;
+	};
+
+	/* Aquila GPIO_09_CSI_1 */
+	pinctrl_gpio_09_csi_1: main-gpio0-1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */ /* AQUILA B17 */
+		>;
+	};
+
+	/* Aquila GPIO_10_CSI_1 */
+	pinctrl_gpio_10_csi_1: main-gpio0-2-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */ /* AQUILA B18 */
+		>;
+	};
+
+	/* Aquila USB_1_OC# */
+	pinctrl_usb1_oc: main-gpio0-10-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x028, PIN_INPUT, 7) /* (AE33) MCAN16_RX.GPIO0_10 */ /* AQUILA B75 */
+		>;
+	};
+
+	/* Aquila USB_1_EN */
+	pinctrl_usb1_en_gpio: main-gpio0-11-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x02c, PIN_INPUT, 7) /* (AL32) GPIO0_11 */ /* AQUILA B77 */
+		>;
+	};
+
+	/* Aquila GPIO_17_DSI_1 */
+	pinctrl_gpio_17_dsi_1: main-gpio0-12-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x030, PIN_INPUT, 7) /* (AK37) GPIO0_12 */ /* AQUILA B42 */
+		>;
+	};
+
+	/* Aquila GPIO_19_DSI_1 */
+	pinctrl_gpio_19_dsi_1: main-gpio0-13-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x034, PIN_INPUT, 7) /* (AJ34) PMIC_WAKE0n.GPIO0_13 */ /* AQUILA B44 */
+		>;
+	};
+
+	/* Aquila GPIO_02 */
+	pinctrl_gpio_02: main-gpio0-17-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x044, PIN_INPUT, 7) /* (AG37) MCASP0_AXR1.GPIO0_17 */ /* AQUILA D24 */
+		>;
+	};
+
+	/* Aquila GPIO_20_DSI_1 */
+	pinctrl_gpio_20_dsi_1: main-gpio0-18-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x048, PIN_INPUT, 7) /* (AK33) MCASP0_AXR2.GPIO0_18 */ /* AQUILA B45 */
+		>;
+	};
+
+	/* Aquila GPIO_21_DP */
+	pinctrl_gpio_21_dp: main-gpio0-21-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x054, PIN_INPUT, 7) /* (AD37) MCASP2_ACLKX.GPIO0_21 */ /* AQUILA B57 */
+		>;
+	};
+
+	/* Aquila USB_1_INT# */
+	pinctrl_usb1_int: main-gpio0-28-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x070, PIN_INPUT, 7) /* (AH38) MCAN1_RX.GPIO0_28 */ /* AQUILA B74 */
+		>;
+	};
+
+	/* Aquila GPIO_03 */
+	pinctrl_gpio_03: main-gpio0-29-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x074, PIN_INPUT, 7) /* (AC33) MCAN2_TX.GPIO0_29 */ /* AQUILA D25 */
+		>;
+	};
+
+	/* Aquila GPIO_18_DSI_1 */
+	pinctrl_gpio_18_dsi_1: main-gpio0-31-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x07c, PIN_INPUT, 7) /* (AJ38) MCASP0_AXR3.GPIO0_31 */ /* AQUILA B43 */
+		>;
+	};
+
+	/* Aquila PCIE_1_RESET# */
+	pinctrl_pcie0_reset: main-gpio0-32-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x080, PIN_INPUT, 7) /* (AK34) MCASP0_AXR4.GPIO0_32 */ /* AQUILA C38 */
+		>;
+	};
+
+	/* Aquila PWM_3_DSI as GPIO */
+	pinctrl_pwm3_dsi_gpio: main-gpio0-33-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x084, PIN_INPUT, 7) /* (AG38) MCASP0_AXR5.GPIO0_33 */ /* AQUILA B46 */
+		>;
+	};
+
+	/* Aquila GPIO_01 */
+	pinctrl_gpio_01: main-gpio0-34-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x088, PIN_INPUT, 7) /* (AF36) MCASP0_AXR6.GPIO0_34 */ /* AQUILA D23 */
+		>;
+	};
+
+	/* Aquila PCIE_2_RESET# */
+	pinctrl_pcie1_reset: main-gpio0-41-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0a4, PIN_INPUT, 7) /* (AJ36) MCASP0_AXR13.GPIO0_41 */ /* AQUILA C35 */
+		>;
+	};
+
+	/* Aquila ETH_2_xGMII_INT# */
+	pinctrl_eth2_int: main-gpio0-44-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0b0, PIN_INPUT_PULLUP, 7) /* (AL33) MCASP1_AXR3.GPIO0_44 */ /* AQUILA B81 */
+		>;
+	};
+
+	/* Aquila GPIO_11_CSI_1 */
+	pinctrl_gpio_11_csi_1: main-gpio0-47-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0bc, PIN_INPUT, 7) /* (AD33) MCASP1_AFSX.GPIO0_47 */ /* AQUILA A11 */
+		>;
+	};
+
+	/* Aquila GPIO_12_CSI_1 */
+	pinctrl_gpio_12_csi_1: main-gpio0-48-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0c0, PIN_INPUT, 7) /* (AD38) MCASP1_AXR0.GPIO0_48 */ /* AQUILA B19 */
+		>;
+	};
+
+	/* Aquila SD_1_PWR_EN */
+	pinctrl_sd1_pwr_en: main-gpio0-52-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0d0, PIN_INPUT, 7) /* (AP38) SPI0_CS1.GPIO0_52 */ /* AQUILA A6 */
+		>;
+	};
+
+	/* Aquila SD_1_CD# as GPIO */
+	pinctrl_sd1_cd_gpio: main-gpio0-58-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0e8, PIN_INPUT_PULLUP, 7) /* (AR38) TIMER_IO0.GPIO0_58 */ /* AQUILA A1 */
+		>;
+	};
+
+	/* Aquila I2C_3_DSI1 */
+	pinctrl_main_i2c0: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0e0, PIN_INPUT, 0) /* (AN36) I2C0_SCL */ /* AQUILA B41 */
+			J784S4_IOPAD(0x0e4, PIN_INPUT, 0) /* (AP37) I2C0_SDA */ /* AQUILA B40 */
+			>;
+	};
+
+	/* Aquila I2C_4_CSI1 */
+	pinctrl_main_i2c1: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x020, PIN_INPUT_PULLUP, 12) /* (AJ35) MCAN15_RX.I2C1_SCL */ /* AQUILA A13 */
+			J784S4_IOPAD(0x024, PIN_INPUT_PULLUP, 12) /* (AH34) MCAN16_TX.I2C1_SDA */ /* AQUILA A12 */
+			>;
+	};
+
+	/* Aquila I2C_5_CSI2 */
+	pinctrl_main_i2c2: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x04c, PIN_INPUT_PULLUP, 13) /* (AC32) MCASP1_AXR1.I2C2_SCL */ /* AQUILA C6 */
+			J784S4_IOPAD(0x050, PIN_INPUT_PULLUP, 13) /* (AC37) MCASP1_AXR2.I2C2_SDA */ /* AQUILA C5 */
+			>;
+	};
+
+	/* Aquila I2C_6 */
+	pinctrl_main_i2c5: main-i2c5-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x01c, PIN_INPUT_PULLUP, 8) /* (AG34) MCAN15_TX.I2C5_SCL */ /* AQUILA C19 */
+			J784S4_IOPAD(0x018, PIN_INPUT_PULLUP, 8) /* (AK36) MCAN14_RX.I2C5_SDA */ /* AQUILA C18 */
+			>;
+	};
+
+	/* Aquila I2S_1_MCLK */
+	pinctrl_audio_extrefclk1: audio-extrefclk1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */ /* AQUILA B24 */
+		>;
+	};
+
+	/* Aquila CAN_1 */
+	pinctrl_main_mcan10: main-mcan10-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0b8, PIN_INPUT, 0)  /* (AC34) MCASP1_ACLKX.MCAN10_RX */ /* AQUILA B49 */
+			J784S4_IOPAD(0x0b4, PIN_OUTPUT, 0) /* (AL34) MCASP1_AXR4.MCAN10_TX  */ /* AQUILA B48 */
+		>;
+	};
+
+	/* Aquila CAN_3 */
+	pinctrl_main_mcan13: main-mcan13-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x010, PIN_INPUT, 0)  /* (AH33) MCAN13_RX */ /* AQUILA B54 */
+			J784S4_IOPAD(0x00c, PIN_OUTPUT, 0) /* (AF33) MCAN13_TX */ /* AQUILA B53 */
+		>;
+	};
+
+	/* Aquila I2S_1 */
+	pinctrl_main_mcasp4: main-mcasp4-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0c8, PIN_INPUT, 1)  /* (AJ32) EXT_REFCLK1.MCASP4_ACLKX      */ /* AQUILA B20 */
+			J784S4_IOPAD(0x06c, PIN_INPUT, 1)  /* (AJ37) MCAN1_TX.MCASP4_AFSX          */ /* AQUILA B21 */
+			J784S4_IOPAD(0x068, PIN_OUTPUT, 1) /* (AE38) MCAN0_RX.MCASP4_AXR1          */ /* AQUILA B22 */
+			J784S4_IOPAD(0x0c4, PIN_INPUT, 1)  /* (AD36) ECAP0_IN_APWM_OUT.MCASP4_AXR2 */ /* AQUILA B23 */
+		>;
+	};
+
+	/* Aquila ETH_2_XGMII_MDIO */
+	pinctrl_main_mdio1: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x058, PIN_OUTPUT, 4) /* (AE37) MCASP2_AFSX.MDIO1_MDC  */ /* AQUILA B90 */
+			J784S4_IOPAD(0x05c, PIN_INPUT, 4)  /* (AC36) MCASP2_AXR0.MDIO1_MDIO */ /* AQUILA B89 */
+		>;
+	};
+
+	/* Aquila SD_1 */
+	pinctrl_main_mmc1: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK  */ /* AQUILA A5  */
+			J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD  */ /* AQUILA A7  */
+			J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
+			J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ /* AQUILA A3  */
+			J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ /* AQUILA A2  */
+			J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ /* AQUILA A10 */
+			J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ /* AQUILA A8  */
+		>;
+	};
+
+	/* Aquila SPI_2 */
+	pinctrl_main_spi0: main-spi0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AN38) SPI0_CLK */ /* AQUILA D14 */
+			J784S4_IOPAD(0x0d8, PIN_INPUT, 0)  /* (AM35) SPI0_D0  */ /* AQUILA D15 */
+			J784S4_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (AM36) SPI0_D1  */ /* AQUILA D17 */
+		>;
+	};
+
+	/* Aquila SPI_2 CS */
+	pinctrl_main_spi0_cs0: main-spi0-cs0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (AM37) SPI0_CS0 */ /* AQUILA D16 */
+		>;
+	};
+
+	/* Aquila SPI_1 */
+	pinctrl_main_spi2: main-spi2-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0a0, PIN_OUTPUT, 10) /* (AD34) MCASP0_AXR12.SPI2_CLK */ /* AQUILA D12 */
+			J784S4_IOPAD(0x0a8, PIN_INPUT, 10)  /* (AF34) MCASP0_AXR14.SPI2_D0  */ /* AQUILA D10 */
+			J784S4_IOPAD(0x0ac, PIN_OUTPUT, 10) /* (AE34) MCASP0_AXR15.SPI2_D1  */ /* AQUILA D11 */
+			>;
+	};
+
+	/* Aquila SPI_1 CS */
+	pinctrl_main_spi2_cs0: main-spi2-cs0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x09c, PIN_OUTPUT, 10) /* (AF35) MCASP0_AXR11.SPI2_CS1 */ /* AQUILA D9 */
+		>;
+	};
+
+	/* Aquila UART_1 */
+	pinctrl_main_uart4: main-uart4-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x094, PIN_INPUT, 11)  /* (AG35) MCASP0_AXR9.UART4_CTSn  */ /* AQUILA B36 */
+			J784S4_IOPAD(0x098, PIN_OUTPUT, 11) /* (AH36) MCASP0_AXR10.UART4_RTSn */ /* AQUILA B38 */
+			J784S4_IOPAD(0x08c, PIN_INPUT, 11)  /* (AE35) MCASP0_AXR7.UART4_RXD   */ /* AQUILA B35 */
+			J784S4_IOPAD(0x090, PIN_OUTPUT, 11) /* (AC35) MCASP0_AXR8.UART4_TXD   */ /* AQUILA B37 */
+		>;
+	};
+
+	/* Aquila UART_3, used as the Linux console */
+	pinctrl_main_uart8: main-uart8-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x038, PIN_INPUT, 11)  /* (AK35) MCASP0_ACLKX.UART8_RXD */ /* AQUILA D19 */
+			J784S4_IOPAD(0x03c, PIN_OUTPUT, 11) /* (AK38) MCASP0_AFSX.UART8_TXD  */ /* AQUILA D20 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	/* Aquila QSPI_1 (4-bit) */
+	pinctrl_mcu_ospi0_4bit: mcu-ospi0-4bit-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK  */ /* AQUILA B65 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0)  /* (B33) MCU_OSPI0_D0   */ /* AQUILA B68 */
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0)  /* (B32) MCU_OSPI0_D1   */ /* AQUILA B67 */
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0)  /* (C33) MCU_OSPI0_D2   */ /* AQUILA B61 */
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0)  /* (C35) MCU_OSPI0_D3   */ /* AQUILA B60 */
+			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0)  /* (C34) MCU_OSPI0_DQS  */ /* AQUILA B63 */
+		>;
+	};
+
+	/* Aquila QSPI_1 (8-bit) */
+	pinctrl_mcu_ospi0_8bit: mcu-ospi0-8bit-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK  */ /* AQUILA B65 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0)  /* (B33) MCU_OSPI0_D0   */ /* AQUILA B68 */
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0)  /* (B32) MCU_OSPI0_D1   */ /* AQUILA B67 */
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0)  /* (C33) MCU_OSPI0_D2   */ /* AQUILA B61 */
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0)  /* (C35) MCU_OSPI0_D3   */ /* AQUILA B60 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0)  /* (D33) MCU_OSPI0_D4   */ /* AQUILA B70 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0)  /* (D34) MCU_OSPI0_D5   */ /* AQUILA B71 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0)  /* (E34) MCU_OSPI0_D6   */ /* AQUILA B72 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0)  /* (E33) MCU_OSPI0_D7   */ /* AQUILA B73 */
+			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0)  /* (C34) MCU_OSPI0_DQS  */ /* AQUILA B63 */
+		>;
+	};
+
+	/* Aquila QSPI_1_CS1# */
+	pinctrl_mcu_ospi0_cs0: mcu-ospi0-cs0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ /* AQUILA B66 */
+		>;
+	};
+
+	/* Aquila QSPI_1_CS2# */
+	pinctrl_mcu_ospi0_cs1: mcu-ospi0-cs1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (A33) MCU_OSPI0_CSn1 */ /* AQUILA B62 */
+		>;
+	};
+
+	/* Aquila QSPI_1_SCK as GPIO */
+	pinctrl_wkup_gpio_16: wkup-gpio0-16-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (E32) MCU_OSPI0_CLK.WKUP_GPIO0_16 */ /* AQUILA B65 */
+		>;
+	};
+
+	/* Aquila GPIO_04 */
+	pinctrl_gpio_04: wkup-gpio0-17-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 7) /* (D32) MCU_OSPI0_LBCLKO.WKUP_GPIO0_17 */ /* AQUILA C20 */
+		>;
+	};
+
+	/* Aquila QSPI_1_DQS as GPIO */
+	pinctrl_wkup_gpio_18: wkup-gpio0-18-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 7) /* (C34) MCU_OSPI0_DQS.WKUP_GPIO0_18 */ /* AQUILA B63 */
+		>;
+	};
+
+	/* Aquila QSPI_1_IO0 as GPIO */
+	pinctrl_wkup_gpio_19: wkup-gpio0-19-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 7) /* (B33) MCU_OSPI0_D0.WKUP_GPIO0_19 */ /* AQUILA B68 */
+		>;
+	};
+
+	/* Aquila QSPI_1_IO1 as GPIO */
+	pinctrl_wkup_gpio_20: wkup-gpio0-20-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 7) /* (B32) MCU_OSPI0_D1.WKUP_GPIO0_20 */ /* AQUILA B67 */
+		>;
+	};
+
+	/* Aquila QSPI_1_IO2 as GPIO */
+	pinctrl_wkup_gpio_21: wkup-gpio0-21-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 7) /* (C33) MCU_OSPI0_D2.WKUP_GPIO0_21 */ /* AQUILA B61 */
+		>;
+	};
+
+	/* Aquila QSPI_1_IO3 as GPIO */
+	pinctrl_wkup_gpio_22: wkup-gpio0-22-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 7) /* (C35) MCU_OSPI0_D3.WKUP_GPIO0_22 */ /* AQUILA B60 */
+		>;
+	};
+
+	/* Aquila QSPI_1_IO4 as GPIO */
+	pinctrl_wkup_gpio_23: wkup-gpio0-23-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (D33) MCU_OSPI0_D4.WKUP_GPIO0_23 */ /* AQUILA B70 */
+		>;
+	};
+
+	/* Aquila QSPI_1_IO5 as GPIO */
+	pinctrl_wkup_gpio_24: wkup-gpio0-24-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 7) /* (D34) MCU_OSPI0_D5.WKUP_GPIO0_24 */ /* AQUILA B71 */
+		>;
+	};
+
+	/* Aquila QSPI_1_IO6 as GPIO */
+	pinctrl_wkup_gpio_25: wkup-gpio0-25-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 7) /* (E34) MCU_OSPI0_D6.WKUP_GPIO0_25 */ /* AQUILA B72 */
+		>;
+	};
+
+	/* Aquila QSPI_1_IO7 as GPIO */
+	pinctrl_wkup_gpio_26: wkup-gpio0-26-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (E33) MCU_OSPI0_D7.WKUP_GPIO0_26 */ /* AQUILA B73 */
+		>;
+	};
+
+	/* Aquila QSPI_1_CS#1 as GPIO */
+	pinctrl_wkup_gpio_27: wkup-gpio0-27-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 7) /* (A32) MCU_OSPI0_CSn0.WKUP_GPIO0_27 */ /* AQUILA B66 */
+		>;
+	};
+
+	/* Aquila QSPI_1_CS#2 as GPIO */
+	pinctrl_wkup_gpio_28: wkup-gpio0-28-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 7) /* (A33) MCU_OSPI0_CSn1.WKUP_GPIO0_28 */ /* AQUILA B62 */
+		>;
+	};
+};
+
+&wkup_pmx1 {
+	/* Aquila UART_4 (RXD) */
+	pinctrl_mcu_uart0_rx: mcu-uart0-rx-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 4)  /* (D31) MCU_OSPI1_D1.MCU_UART0_RXD */ /* AQUILA D21 */
+		>;
+	};
+
+	/* Aquila GPIO_05 */
+	pinctrl_gpio_05: wkup-gpio0-29-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (B34) MCU_OSPI0_CSn2.WKUP_GPIO0_29 */ /* AQUILA C21 */
+		>;
+	};
+
+	/* Aquila GPIO_06 */
+	pinctrl_gpio_06: wkup-gpio0-30-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 7) /* (C32) MCU_OSPI0_CSn3.WKUP_GPIO0_30 */ /* AQUILA C22 */
+		>;
+	};
+
+	/* Aquila GPIO_07 */
+	pinctrl_gpio_07: wkup-gpio0-31-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 7) /* (F32) MCU_OSPI1_CLK.WKUP_GPIO0_31 */ /* AQUILA C23 */
+		>;
+	};
+
+	/* Aquila GPIO_13_CSI_2 */
+	pinctrl_gpio_13_csi_2: wkup-gpio0-32-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 7) /* (C31) MCU_OSPI1_LBCLKO.WKUP_GPIO0_32 */ /* AQUILA C1 */
+		>;
+	};
+
+	/* Aquila GPIO_14_CSI_2 */
+	pinctrl_gpio_14_csi_2: wkup-gpio0-33-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 7) /* (F31) MCU_OSPI1_DQS.WKUP_GPIO0_33 */ /* AQUILA C2 */
+		>;
+	};
+
+	/* RTC_IRQ# */
+	pinctrl_rtc_irq: wkup-gpio0-34-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 7) /* (E35) MCU_OSPI1_D0.WKUP_GPIO0_34 */
+		>;
+	};
+
+	/* Aquila CTRL_PWR_BTN_MICO# (PWR_BTN_INT#) */
+	pinctrl_pwr_btn_int: wkup-gpio0-36-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT_PULLUP, 7) /* (G31) MCU_OSPI1_D2.WKUP_GPIO0_36 */ /* AQUILA B92 */
+		>;
+	};
+
+	/* Aquila GPIO_15_CSI_2 */
+	pinctrl_gpio_15_csi_2: wkup-gpio0-37-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 7) /* (F33) MCU_OSPI1_D3.WKUP_GPIO0_37 */ /* AQUILA C3 */
+		>;
+	};
+
+	/* Aquila GPIO_08 */
+	pinctrl_gpio_08: wkup-gpio0-38-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 7) /* (G32) MCU_OSPI1_CSn0.WKUP_GPIO0_38 */ /* AQUILA C24 */
+		>;
+	};
+
+	/* Aquila GPIO_16_CSI_2 */
+	pinctrl_gpio_16_csi_2: wkup-gpio0-39-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ /* AQUILA C4 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	/* Aquila ADC_[1-4] */
+	pinctrl_mcu_adc0: mcu-adc0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (P36) MCU_ADC0_AIN0 */ /* AQUILA D1 */
+			J784S4_WKUP_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (V36) MCU_ADC0_AIN1 */ /* AQUILA D2 */
+			J784S4_WKUP_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (T34) MCU_ADC0_AIN2 */ /* AQUILA D3 */
+			J784S4_WKUP_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (T36) MCU_ADC0_AIN3 */ /* AQUILA D4 */
+		>;
+	};
+
+	/* Aquila CTRL_MCLK_MOCI */
+	pinctrl_mcu_clkout0: mcu-clkout0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x084, PIN_OUTPUT, 6) /* (M38) WKUP_GPIO0_11.MCU_CLKOUT0 */ /* AQUILA A14 */
+		>;
+	};
+
+	/* Aquila I2C_1 */
+	pinctrl_mcu_i2c0: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (M35) MCU_I2C0_SCL */ /* AQUILA D8 */
+			J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (G34) MCU_I2C0_SDA */ /* AQUILA D7 */
+		>;
+	};
+
+	/* Aquila I2C_2 */
+	pinctrl_mcu_i2c1: mcu-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) /* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */ /* AQUILA C17 */
+			J784S4_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) /* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */ /* AQUILA C16 */
+		>;
+	};
+
+	/* Aquila CAN_2 */
+	pinctrl_mcu_mcan0: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0)  /* (F38) MCU_MCAN0_RX  */ /* AQUILA B51 */
+			J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX  */ /* AQUILA B50 */
+		>;
+	};
+
+	/* Aquila CAN_4 */
+	pinctrl_mcu_mcan1: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0)  /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */ /* AQUILA B56 */
+			J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */ /* AQUILA B55 */
+		>;
+	};
+
+	/* On-module ETH_1 MDIO */
+	pinctrl_mcu_mdio: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC  */
+			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0)  /* (B35) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	/* On-module ETH_1 RGMII */
+	pinctrl_mcu_rgmii1: mcu-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0)  /* (A35) MCU_RGMII1_RD0    */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0)  /* (B36) MCU_RGMII1_RD1    */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0)  /* (C36) MCU_RGMII1_RD2    */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0)  /* (D36) MCU_RGMII1_RD3    */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0)  /* (B37) MCU_RGMII1_RXC    */
+			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0)  /* (C37) MCU_RGMII1_RX_CTL */
+			J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0    */
+			J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1    */
+			J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2    */
+			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3    */
+			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC    */
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	/* On-module SPI (TPM_SPI) */
+	pinctrl_mcu_spi0: mcu-spi0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x038, PIN_OUTPUT, 0) /* (G38) MCU_SPI0_CLK */
+			J784S4_WKUP_IOPAD(0x044, PIN_OUTPUT, 0) /* (F37) MCU_SPI0_CS0 */
+			J784S4_WKUP_IOPAD(0x03c, PIN_INPUT, 0)  /* (H36) MCU_SPI0_D0  */
+			J784S4_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (J38) MCU_SPI0_D1  */
+		>;
+	};
+
+	/* Aquila UART_4 (TX) */
+	pinctrl_mcu_uart0_tx: mcu-uart0-tx-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 2) /* (L33) WKUP_GPIO0_10.MCU_UART0_TXD */ /* AQUILA D22 */
+		>;
+	};
+
+	/* On-module Wi-Fi Power Enable */
+	pinctrl_en_3v3_wifi: wkup-gpio0-57-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (M36) WKUP_GPIO0_57 */
+		>;
+	};
+
+	/* On-module TPM IRQ# */
+	pinctrl_tpm_irq: wkup-gpio0-81-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 7) /* (V34) MCU_ADC1_AIN2.WKUP_GPIO0_81 */
+		>;
+	};
+
+	/* On-module I2C - WKUP_I2C0 */
+	pinctrl_wkup_i2c0: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J784S4_WKUP_IOPAD(0x09c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+		>;
+	};
+
+	/* Aquila UART_2 */
+	pinctrl_wkup_uart0: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0)  /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ /* AQUILA B32 */
+			J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ /* AQUILA B34 */
+			J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0)  /* (K35) WKUP_UART0_RXD               */ /* AQUILA B31 */
+			J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD               */ /* AQUILA B33 */
+		>;
+	};
+};
+
+&wkup_pmx3 {
+	/* Aquila CTRL_WAKE1_MICO# */
+	pinctrl_ctrl_wake1_mico: wkup-gpio0-49-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x000, PIN_INPUT_PULLUP, 7) /* (M33) WKUP_GPIO0_49 */ /* AQUILA D6 */
+		>;
+	};
+};
+
+/* Aquila I2S_1_MCLK */
+&audio_refclk1 {
+	assigned-clock-rates = <24576000>;
+};
+
+/* On-module ETH_1 MDIO */
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_mdio>;
+	status = "disabled";
+
+	mcu_phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <79 IRQ_TYPE_EDGE_FALLING>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&dss {
+	assigned-clocks = <&k3_clks 218 2>,
+			  <&k3_clks 218 5>;
+	assigned-clock-parents = <&k3_clks 218 3>,
+				 <&k3_clks 218 7>;
+	status = "disabled";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+};
+
+&dp0_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+};
+
+&main0_crit {
+	temperature = <105000>;
+};
+
+&main0_thermal {
+	trips {
+		main0_alert0: trip-point0 {
+			temperature = <70000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		main0_alert1: trip-point1 {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+};
+
+&main1_crit {
+	temperature = <105000>;
+};
+
+&main1_thermal {
+	trips {
+		main1_alert0: trip-point0 {
+			temperature = <70000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		main1_alert1: trip-point1 {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+};
+
+&main2_crit {
+	temperature = <105000>;
+};
+
+&main2_thermal {
+	trips {
+		main2_alert0: trip-point0 {
+			temperature = <70000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		main2_alert1: trip-point1 {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+};
+
+&main3_crit {
+	temperature = <105000>;
+};
+
+&main3_thermal {
+	trips {
+		main3_alert0: trip-point0 {
+			temperature = <70000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		main3_alert1: trip-point1 {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+};
+
+&main4_crit {
+	temperature = <105000>;
+};
+
+&main4_thermal {
+	trips {
+		main4_alert0: trip-point0 {
+			temperature = <70000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		main4_alert1: trip-point1 {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+};
+
+/* Aquila ETH_2 SGMII PHY */
+&main_cpsw0_port8 {
+	phy-mode = "sgmii";
+	phys = <&cpsw0_phy_gmii_sel 8>, <&serdes2_sgmii_link>;
+	phy-names = "mac", "serdes";
+	status = "disabled";
+};
+
+/* Aquila ETH_2_XGMII_MDIO */
+&main_cpsw0_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_mdio1>;
+};
+
+/* Aquila PWM_1 */
+&main_ehrpwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_ehrpwm0_b>;
+	status = "disabled";
+};
+
+/* Aquila PWM_2 */
+&main_ehrpwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_ehrpwm1_a>;
+	status = "disabled";
+};
+
+/* Aquila PWM_4_DP */
+&main_ehrpwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_ehrpwm2_a>;
+	status = "disabled";
+};
+
+/* Aquila PWM_3_DSI */
+&main_ehrpwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_ehrpwm5_a>;
+	status = "disabled";
+};
+
+&main_gpio0 {
+	gpio-line-names =
+		"", /* 0 */
+		"AQUILA_B17",
+		"AQUILA_B18",
+		"AQUILA_B53",
+		"AQUILA_B54",
+		"AQUILA_B59",
+		"AQUILA_C18",
+		"AQUILA_C19",
+		"AQUILA_A13",
+		"AQUILA_A12",
+		"AQUILA_B75", /* 10 */
+		"AQUILA_B77",
+		"AQUILA_B42",
+		"AQUILA_B44",
+		"AQUILA_D19",
+		"AQUILA_D20",
+		"AQUILA_B58",
+		"AQUILA_D24",
+		"AQUILA_B45",
+		"AQUILA_C06",
+		"AQUILA_C05", /* 20 */
+		"AQUILA_B57",
+		"AQUILA_B90",
+		"AQUILA_B89",
+		"AQUILA_C26",
+		"AQUILA_C25",
+		"AQUILA_B22",
+		"AQUILA_B21",
+		"AQUILA_B74",
+		"AQUILA_D25",
+		"AQUILA_B24", /* 30 */
+		"AQUILA_B43",
+		"AQUILA_C38",
+		"AQUILA_B46",
+		"AQUILA_D23",
+		"AQUILA_B35",
+		"AQUILA_B37",
+		"AQUILA_B36",
+		"AQUILA_B38",
+		"AQUILA_D09",
+		"AQUILA_D12", /* 40 */
+		"AQUILA_C35",
+		"AQUILA_D10",
+		"AQUILA_D11",
+		"AQUILA_B81",
+		"AQUILA_B48",
+		"AQUILA_B49",
+		"AQUILA_A11",
+		"AQUILA_B19",
+		"AQUILA_B23",
+		"AQUILA_B20", /* 50 */
+		"AQUILA_D16",
+		"AQUILA_A06",
+		"AQUILA_D14",
+		"AQUILA_D15",
+		"AQUILA_D17",
+		"AQUILA_B41",
+		"AQUILA_B40",
+		"AQUILA_A01",
+		"",
+		"AQUILA_A08", /* 60 */
+		"AQUILA_A10",
+		"AQUILA_A02",
+		"AQUILA_A03",
+		"AQUILA_A05",
+		"AQUILA_A07";
+
+	status = "okay";
+};
+
+/* Aquila I2C_3_DSI1 */
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_i2c0>;
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+/* Aquila I2C_4_CSI1 */
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_i2c1>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+/* Aquila I2C_5_CSI2 */
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_i2c2>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+/* Aquila I2C_6 */
+&main_i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_i2c5>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+/* Aquila CAN_1 */
+&main_mcan10 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_mcan10>;
+	status = "disabled";
+};
+
+/* Aquila CAN_3 */
+&main_mcan13 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_mcan13>;
+	status = "disabled";
+};
+
+/* On-module eMMC */
+&main_sdhci0 {
+	disable-wp;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	status = "okay";
+};
+
+/* Aquila SD_1 */
+&main_sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_mmc1>, <&pinctrl_sd1_cd_gpio>;
+	cd-gpios = <&main_gpio0 58 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&reg_sdhc1_vmmc>;
+	vqmmc-supply = <&reg_sdhc1_vqmmc>;
+	ti,driver-strength-ohm = <50>;
+	ti,fails-without-test-cd;
+	status = "disabled";
+};
+
+/* Aquila SPI_2 */
+&main_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_spi0>, <&pinctrl_main_spi0_cs0>;
+	status = "disabled";
+};
+
+/* Aquila SPI_1 */
+&main_spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_spi2>, <&pinctrl_main_spi2_cs0>;
+	status = "disabled";
+};
+
+/* Aquila UART_1 */
+&main_uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_uart4>;
+	status = "disabled";
+};
+
+/* Aquila UART_3, used as the Linux console */
+&main_uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_uart8>;
+	status = "disabled";
+};
+
+/* Aquila I2S_1 */
+&mcasp4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_mcasp4>;
+	op-mode = <0>;  /* MCASP_I2S_MODE */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		0 1 2 0
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+	tdm-slots = <2>;
+	#sound-dai-cells = <0>;
+	status = "disabled";
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_rgmii1>;
+	status = "disabled";
+};
+
+/* On-module ETH_1 RGMII */
+&mcu_cpsw_port1 {
+	phy-handle = <&mcu_phy0>;
+	phy-mode = "rgmii-id";
+	status = "disabled";
+};
+
+/* Aquila I2C_1 */
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_i2c0>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+/* Aquila I2C_2 */
+&mcu_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_i2c1>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+/* Aquila CAN_2 */
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_mcan0>;
+	status = "disabled";
+};
+
+/* Aquila CAN_4 */
+&mcu_mcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_mcan1>;
+	status = "disabled";
+};
+
+/* On-module SPI (TPM_SPI) */
+&mcu_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_spi0>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <81 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <33000000>;
+	};
+};
+
+/* Aquila UART_4 */
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_uart0_rx>, <&pinctrl_mcu_uart0_tx>;
+	status = "disabled";
+};
+
+&mhdp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_main_dp0_hpd>;
+	phy-names = "dpphy";
+	phys = <&serdes4_dp0_link>;
+	status = "disabled";
+};
+
+/* Aquila QSPI_1 */
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_ospi0_8bit>, <&pinctrl_mcu_ospi0_cs0>;
+	status = "disabled";
+};
+
+/* Aquila PCIE_1 */
+&pcie0_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0_reset>;
+	clocks = <&k3_clks 332 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>;
+	clock-names = "fck", "pcie_refclk";
+	num-lanes = <2>;
+	phy-names = "pcie-phy";
+	phys = <&serdes1_pcie0_2l_link>;
+	reset-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
+	ti,syscon-acspcie-proxy-ctrl = <&acspcie1_proxy_ctrl 0x3>;
+	status = "disabled";
+};
+
+/* Aquila PCIE_2 */
+&pcie1_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1_reset>;
+	clocks = <&k3_clks 333 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>;
+	clock-names = "fck", "pcie_refclk";
+	num-lanes = <2>;
+	phy-names = "pcie-phy";
+	phys = <&serdes0_pcie1_2l_link>;
+	reset-gpios = <&main_gpio0 41 GPIO_ACTIVE_HIGH>;
+	ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>;
+	status = "disabled";
+};
+
+/* On-module PCIe USB Bridge */
+&pcie2_rc {
+	clocks = <&k3_clks 334 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>;
+	clock-names = "fck", "pcie_refclk";
+	num-lanes = <1>;
+	phy-names = "pcie-phy";
+	phys = <&serdes1_pcie2_1l_link>;
+	reset-gpios = <&som_gpio_expander 3 GPIO_ACTIVE_HIGH>;
+	ti,syscon-acspcie-proxy-ctrl = <&acspcie1_proxy_ctrl 0x3>;
+	status = "okay";
+
+	pci@0,0 {
+		device_type = "pci";
+		reg = <0x0 0x0 0x0 0x0 0x0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		usb@0 {
+			compatible = "pci104c,8241";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			ti,pwron-active-high;
+		};
+	};
+};
+
+/* PCIE for On-module Wi-Fi */
+&pcie3_rc {
+	clocks = <&k3_clks 335 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>;
+	clock-names = "fck", "pcie_refclk";
+	num-lanes = <1>;
+	phy-names = "pcie-phy";
+	phys = <&serdes0_pcie3_1l_link>;
+	reset-gpios = <&som_gpio_expander 4 GPIO_ACTIVE_HIGH>;
+	ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>;
+	status = "okay";
+};
+
+&serdes0 {
+	status = "okay";
+
+	/* Aquila PCIE_2 */
+	serdes0_pcie1_2l_link: phy@0 {
+		reg = <0>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+		cdns,num-lanes = <2>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+	};
+
+	/* On-module PCIe Wi-Fi */
+	serdes0_pcie3_1l_link: phy@2 {
+		reg = <2>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 3>;
+		cdns,num-lanes = <1>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+	};
+
+	/* Aquila USB0 SS */
+	serdes0_usb0_ss_link: phy@3 {
+		reg = <3>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 4>;
+		cdns,num-lanes = <1>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+	};
+};
+
+&serdes1 {
+	status = "okay";
+
+	/* Aquila PCIE_1 */
+	serdes1_pcie0_2l_link: phy@0 {
+		reg = <0>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+		cdns,num-lanes = <2>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+	};
+
+	/* On-module PCIe USB Bridge */
+	serdes1_pcie2_1l_link: phy@2 {
+		reg = <2>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz1 3>;
+		cdns,num-lanes = <1>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+	};
+};
+
+&serdes2 {
+	status = "disabled";
+
+	/* Aquila ETH_2 xGMII */
+	serdes2_sgmii_link: phy@3 {
+		reg = <3>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz2 4>;
+		cdns,num-lanes = <1>;
+		cdns,phy-type = <PHY_TYPE_SGMII>;
+	};
+};
+
+&serdes4 {
+	status = "disabled";
+
+	/* Aquila DP_1 */
+	serdes4_dp0_link: phy@0 {
+		reg = <0>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>,
+			 <&serdes_wiz4 3>, <&serdes_wiz4 4>;
+		cdns,max-bit-rate = <5400>;
+		cdns,num-lanes = <4>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+	};
+};
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+	status = "okay";
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>,     /* Aquila PCIE_2 L0          */
+		      <J784S4_SERDES0_LANE1_PCIE1_LANE1>,     /* Aquila PCIE_2 L1          */
+		      <J784S4_SERDES0_LANE2_PCIE3_LANE0>,     /* On-module PCIe Wi-Fi      */
+		      <J784S4_SERDES0_LANE3_USB>,             /* Aquila USB0 SS            */
+		      <J784S4_SERDES1_LANE0_PCIE0_LANE0>,     /* Aquila PCIE_1 L0          */
+		      <J784S4_SERDES1_LANE1_PCIE0_LANE1>,     /* Aquila PCIE_1 L1          */
+		      <J784S4_SERDES1_LANE2_PCIE2_LANE0>,     /* On-module PCIe USB Bridge */
+		      <J784S4_SERDES1_LANE3_QSGMII_LANE2>,    /* Aquila SGMII MSP_9        */
+		      <J784S4_SERDES2_LANE0_QSGMII_LANE5>,    /* Aquila SGMII MSP_6        */
+		      <J784S4_SERDES2_LANE1_QSGMII_LANE6>,    /* Aquila SGMII MSP_7        */
+		      <J784S4_SERDES2_LANE2_QSGMII_LANE7>,    /* Aquila SGMII MSP_8        */
+		      <J784S4_SERDES2_LANE3_QSGMII_LANE8>,    /* Aquila ETH_2 xGMII        */
+		      <J784S4_SERDES4_LANE0_EDP_LANE0>,       /* Aquila DP L0              */
+		      <J784S4_SERDES4_LANE1_EDP_LANE1>,       /* Aquila DP L1              */
+		      <J784S4_SERDES4_LANE2_EDP_LANE2>,       /* Aquila DP L2              */
+		      <J784S4_SERDES4_LANE3_EDP_LANE3>;       /* Aquila DP L3              */
+};
+
+&serdes_wiz0 {
+	status = "okay";
+};
+
+&serdes_wiz1 {
+	status = "okay";
+};
+
+&serdes_wiz2 {
+	status = "disabled";
+};
+
+&serdes_wiz4 {
+	status = "disabled";
+};
+
+/* Aquila ADC_[1-4] */
+&tscadc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_adc0>;
+	status = "disabled";
+
+	adc {
+		ti,adc-channels = <0 1 2 3>;
+	};
+};
+
+&usb0 {
+	phys = <&serdes0_usb0_ss_link>;
+	phy-names = "cdns3,usb3-phy";
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	usb-role-switch;
+	status = "disabled";
+};
+
+&usb_serdes_mux {
+	idle-states = <0>; /* USB0 to SERDES lane 3 */
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "disabled";
+};
+
+&wkup_gpio0 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"",
+		"AQUILA_C53",
+		"AQUILA_B55",
+		"AQUILA_B56",
+		"AQUILA_B32",
+		"AQUILA_B34",
+		"AQUILA_C17",
+		"AQUILA_C16",
+		"AQUILA_D22", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AQUILA_B65",
+		"AQUILA_C20",
+		"AQUILA_B63",
+		"AQUILA_B68",
+		"AQUILA_B67", /* 20 */
+		"AQUILA_B61",
+		"AQUILA_B60",
+		"AQUILA_B70",
+		"AQUILA_B71",
+		"AQUILA_B72",
+		"AQUILC_B73",
+		"AQUILA_B66",
+		"AQUILA_B62",
+		"AQUILA_C21",
+		"AQUILA_C22", /* 30 */
+		"AQUILA_C23",
+		"AQUILA_C01",
+		"AQUILA_C02",
+		"",
+		"AQUILA_D21",
+		"",
+		"AQUILA_C03",
+		"AQUILA_C24",
+		"AQUILA_C04",
+		"AQUILA_B84", /* 40 */
+		"",
+		"AQUILA_B86",
+		"AQUILA_B87",
+		"",
+		"",
+		"AQUILA_B83",
+		"",
+		"",
+		"",
+		"", /* 50 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AQUILA_B31",
+		"AQUILA_B33",
+		"AQUILA_B50", /* 60 */
+		"AQUILA_B51",
+		"",
+		"",
+		"",
+		"AQUILA_D08",
+		"",
+		"",
+		"",
+		"",
+		"", /* 70 */
+		"AQUILA_D01",
+		"AQUILA_D02",
+		"AQUILA_D03",
+		"AQUILA_D04",
+		"AQUILA_D54",
+		"AQUILA_D55",
+		"AQUILA_C55",
+		"AQUILA_C56",
+		"",
+		"AQUILA_C36", /* 80 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AQUILA_D07",
+		"";
+
+	status = "okay";
+};
+
+/* On-module I2C - WKUP_I2C0 */
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wkup_i2c0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	som_gpio_expander: gpio@21 {
+		compatible = "ti,tca6408";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"USB_MUX_SEL",
+			"COLD_RESET_REQ",
+			"PWR_DOWN_REQ",
+			"PCIE_3_RESET#",
+			"PCIE_4_RESET#",
+			"WIFI_DISABLE",
+			"BT_DISABLE",
+			"SDIO_PWR_SEL_3.3V";
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	tps62873a: regulator@40 {
+		compatible = "ti,tps62873";
+		reg = <0x40>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <900000>;
+		regulator-min-microvolt = <600000>;
+		regulator-name = "+VDD_CPU_AVS";
+	};
+
+	tps62873b: regulator@43 {
+		compatible = "ti,tps62873";
+		reg = <0x43>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <840000>;
+		regulator-min-microvolt = <760000>;
+		regulator-name = "+V0.8_VDD_CORE";
+	};
+
+	pmic_tps6594: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic_int>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		buck12-supply = <&reg_vin>;
+		buck3-supply = <&reg_vin>;
+		buck4-supply = <&reg_vin>;
+		buck5-supply = <&reg_vin>;
+		ldo1-supply = <&reg_vin>;
+		ldo2-supply = <&reg_vin>;
+		ldo3-supply = <&reg_vin>;
+		ldo4-supply = <&reg_vin>;
+		system-power-controller;
+		ti,primary-pmic;
+
+		regulators {
+			reg_vdd_ddr: buck12 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "+V1.1_VDD_DDR (PMIC BUCK12)";
+			};
+
+			reg_vdd_ram: buck3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "+V0.85_VDD_RAM (PMIC BUCK3)";
+			};
+
+			reg_vdd_io: buck4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_VDD_IO (PMIC BUCK4)";
+			};
+
+			reg_3v3_vio: buck5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3_VIO (PMIC BUCK5)";
+			};
+
+			reg_vda_phy: ldo1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_VDA_PHY (PMIC LDO1)";
+			};
+
+			reg_2v5_eth: ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <2500000>;
+				regulator-name = "+V2.5_ETH (PMIC LDO2)";
+			};
+
+			reg_vda_dll: ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <800000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "+V0.8_VDA_DLL (PMIC LDO3)";
+			};
+
+			reg_vda_pll: ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V0.8_VDA_PLL (PMIC LDO4)";
+			};
+		};
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	som_eeprom: eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&wkup0_crit {
+	temperature = <105000>;
+};
+
+&wkup0_thermal {
+	trips {
+		wkup0_alert0: trip-point0 {
+			temperature = <70000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		wkup0_alert1: trip-point1 {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+};
+
+&wkup1_crit {
+	temperature = <105000>;
+};
+
+&wkup1_thermal {
+	trips {
+		wkup1_alert0: trip-point0 {
+			temperature = <70000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		wkup1_alert1: trip-point1 {
+			temperature = <85000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+};
+
+&wkup_gpio_intr {
+	status = "okay";
+};
+
+/* Aquila UART_2 */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wkup_uart0>;
+	status = "disabled";
+};
+
+#include "k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi"
+#include "k3-j784s4-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk-pcie0-ep.dtso b/arch/arm64/boot/dts/ti/k3-am69-sk-pcie0-ep.dtso
new file mode 100644
index 000000000000..9a5bcf282a9e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk-pcie0-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling PCIE0 instances of PCIe in Endpoint Configuration
+ * on AM69-SK.
+ *
+ * AM69-SK Product Link: https://www.ti.com/tool/SK-AM69
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie0_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie0_ep: pcie-ep@2900000 {
+		compatible = "ti,j784s4-pcie-ep";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 332 0>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes1_pcie_link>;
+		phy-names = "pcie-phy";
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 1e36965a1403..abe2f21e0e1d 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -49,149 +49,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a8100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_1_dma_memory_region: c71-dma-memory@a9000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa9000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_1_memory_region: c71-memory@a9100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa9100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_2_dma_memory_region: c71-dma-memory@aa000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xaa000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_2_memory_region: c71-memory@aa100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xaa100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_3_dma_memory_region: c71-dma-memory@ab000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xab000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_3_memory_region: c71-memory@ab100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xab100000 0x00 0xf00000>;
-			no-map;
-		};
 	};
 
 	vusb_main: regulator-vusb-main5v0 {
@@ -368,8 +236,8 @@
 
 	main_i2c0_pins_default: main-i2c0-default-pins {
 		pinctrl-single,pins = <
-			J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
-			J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
+			J784S4_IOPAD(0x0e0, PIN_INPUT, 0) /* (AN36) I2C0_SCL */
+			J784S4_IOPAD(0x0e4, PIN_INPUT, 0) /* (AP37) I2C0_SDA */
 		>;
 	};
 
@@ -484,6 +352,12 @@
 		>;
 	};
 
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */
+		>;
+	};
+
 };
 
 &wkup_pmx0 {
@@ -542,8 +416,8 @@
 
 	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
 		pinctrl-single,pins = <
-			J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT_PULLUP, 0) /* (M35) MCU_I2C0_SCL */
-			J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT_PULLUP, 0) /* (G34) MCU_I2C0_SDA */
+			J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (M35) MCU_I2C0_SCL */
+			J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (G34) MCU_I2C0_SDA */
 		>;
 	};
 
@@ -562,6 +436,7 @@
 			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
 			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	mcu_mdio_pins_default: mcu-mdio-default-pins {
@@ -569,6 +444,7 @@
 			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
 			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	mcu_rpi_hdr1_gpio0_pins_default: mcu-rpi-hdr1-gpio0-default-pins {
@@ -624,88 +500,12 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_1: mbox-c71-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
+&cpsw_mac_syscon {
+	bootph-all;
 };
 
-&mailbox0_cluster5 {
-	status = "okay";
-	interrupts = <416>;
-	mbox_c71_2: mbox-c71-2 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_3: mbox-c71-3 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
+&phy_gmii_sel {
+	bootph-all;
 };
 
 &wkup_uart0 {
@@ -755,6 +555,7 @@
 				regulator-max-microvolt = <1100000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			bucka3: buck3 {
@@ -763,6 +564,7 @@
 				regulator-max-microvolt = <850000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			bucka4: buck4 {
@@ -771,6 +573,7 @@
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			bucka5: buck5 {
@@ -779,6 +582,7 @@
 				regulator-max-microvolt = <850000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa1: ldo1 {
@@ -787,6 +591,7 @@
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa2: ldo2 {
@@ -795,6 +600,7 @@
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa3: ldo3 {
@@ -803,6 +609,7 @@
 				regulator-max-microvolt = <800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa4: ldo4 {
@@ -811,6 +618,7 @@
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 		};
 	};
@@ -926,7 +734,6 @@
 	status = "okay";
 	non-removable;
 	ti,driver-strength-ohm = <50>;
-	disable-wp;
 };
 
 &main_sdhci1 {
@@ -955,6 +762,7 @@
 &davinci_mdio {
 	mcu_phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
@@ -963,137 +771,9 @@
 
 &mcu_cpsw_port1 {
 	status = "okay";
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&mcu_phy0>;
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer3 {
-	status = "reserved";
-};
-
-&main_timer4 {
-	status = "reserved";
-};
-
-&main_timer5 {
-	status = "reserved";
-};
-
-&main_timer6 {
-	status = "reserved";
-};
-
-&main_timer7 {
-	status = "reserved";
-};
-
-&main_timer8 {
-	status = "reserved";
-};
-
-&main_timer9 {
-	status = "reserved";
-};
-
-&main_r5fss2 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&main_r5fss2_core0 {
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
-	memory-region = <&main_r5fss2_core0_dma_memory_region>,
-			<&main_r5fss2_core0_memory_region>;
-};
-
-&main_r5fss2_core1 {
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
-	memory-region = <&main_r5fss2_core1_dma_memory_region>,
-			<&main_r5fss2_core1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
-
-&c71_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
-	memory-region = <&c71_1_dma_memory_region>,
-			<&c71_1_memory_region>;
-};
-
-&c71_2 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
-	memory-region = <&c71_2_dma_memory_region>,
-			<&c71_2_memory_region>;
-};
-
-&c71_3 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
-	memory-region = <&c71_3_dma_memory_region>,
-			<&c71_3_memory_region>;
+	bootph-all;
 };
 
 &wkup_gpio_intr {
@@ -1281,8 +961,12 @@
 &serdes_ln_ctrl {
 	idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
 		      <J784S4_SERDES0_LANE2_PCIE3_LANE0>, <J784S4_SERDES0_LANE3_USB>,
-			<J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
-			<J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>;
+		      <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
+		      <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>,
+		      <J784S4_SERDES2_LANE0_IP2_UNUSED>, <J784S4_SERDES2_LANE1_IP2_UNUSED>,
+		      <J784S4_SERDES2_LANE2_QSGMII_LANE1>, <J784S4_SERDES2_LANE3_QSGMII_LANE2>,
+		      <J784S4_SERDES4_LANE0_EDP_LANE0>, <J784S4_SERDES4_LANE1_EDP_LANE1>,
+		      <J784S4_SERDES4_LANE2_EDP_LANE2>, <J784S4_SERDES4_LANE3_EDP_LANE3>;
 };
 
 &serdes_wiz0 {
@@ -1292,12 +976,28 @@
 &serdes0 {
 	status = "okay";
 
-	serdes0_pcie_link: phy@0 {
+	serdes0_pcie1_link: phy@0 {
 		reg = <0>;
-		cdns,num-lanes = <3>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
+	serdes0_pcie3_link: phy@2 {
+		reg = <2>;
+		cdns,num-lanes = <1>;
 		#phy-cells = <0>;
 		cdns,phy-type = <PHY_TYPE_PCIE>;
-		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>, <&serdes_wiz0 3>;
+		resets = <&serdes_wiz0 3>;
+	};
+
+	serdes0_usb_link: phy@3 {
+		reg = <3>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz0 4>;
 	};
 };
 
@@ -1327,7 +1027,7 @@
 &pcie1_rc {
 	status = "okay";
 	reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
-	phys = <&serdes0_pcie_link>;
+	phys = <&serdes0_pcie1_link>;
 	phy-names = "pcie-phy";
 	num-lanes = <2>;
 };
@@ -1335,7 +1035,29 @@
 &pcie3_rc {
 	status = "okay";
 	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
-	phys = <&serdes0_pcie_link>;
+	phys = <&serdes0_pcie3_link>;
 	phy-names = "pcie-phy";
 	num-lanes = <1>;
 };
+
+&usb_serdes_mux {
+	idle-states = <0>; /* USB0 to SERDES0 */
+};
+
+&usbss0 {
+	status = "okay";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	pinctrl-names = "default";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+#include "k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi"
+#include "k3-j784s4-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index db43e7e10b76..3e5efdfe87f1 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -323,6 +323,7 @@
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -334,7 +335,7 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy0>;
 };
 
@@ -409,6 +410,10 @@
 		      <J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>;
 };
 
+&mcu_spi1 {
+	mux-controls = <&spi1_linkdis 0>;
+};
+
 &usb_serdes_mux {
 	idle-states = <1>; /* USB0 to SERDES lane 3 */
 	bootph-all;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso
index 3cc315a0e084..281076d905f3 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso
@@ -48,6 +48,6 @@
 		dma-coherent;
 		phys = <&serdes0_pcie_link>;
 		phy-names = "pcie-phy";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 5ab510a0605f..628ff89dd72f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -32,6 +32,11 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
+		pcie1_ctrl: pcie-ctrl@4074 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4074 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
 			reg = <0x4080 0x20>;
@@ -759,12 +764,12 @@
 		reg = <0x00 0x02910000 0x00 0x1000>,
 		      <0x00 0x02917000 0x00 0x400>,
 		      <0x00 0x0d800000 0x00 0x00800000>,
-		      <0x00 0x18000000 0x00 0x00001000>;
+		      <0x41 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <4>;
 		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
@@ -778,8 +783,8 @@
 		device-id = <0xb00f>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
-			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x41 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x41 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		status = "disabled";
 	};
@@ -1511,6 +1516,7 @@
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
 			 <0x5d00000 0x00 0x5d00000 0x20000>;
 		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss0_core0: r5f@5c00000 {
 			compatible = "ti,j7200-r5f";
@@ -1525,6 +1531,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss0_core1: r5f@5d00000 {
@@ -1540,6 +1547,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 6a8453865874..fec1db8b133d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -184,6 +184,13 @@
 			reg = <0x4040 0x4>;
 			#phy-cells = <1>;
 		};
+
+		spi1_linkdis: mux-controller@4060 {
+			compatible = "reg-mux";
+			reg = <0x4060 0x4>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x0 0x1>;
+		};
 	};
 
 	wkup_conf: bus@43000000 {
@@ -425,6 +432,8 @@
 			    "tx4", "tx5", "tx6", "tx7",
 			    "rx";
 
+		status = "disabled";
+
 		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -605,6 +614,7 @@
 		ranges = <0x41000000 0x00 0x41000000 0x20000>,
 			 <0x41400000 0x00 0x41400000 0x20000>;
 		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		mcu_r5fss0_core0: r5f@41000000 {
 			compatible = "ti,j7200-r5f";
@@ -619,6 +629,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		mcu_r5fss0_core1: r5f@41400000 {
@@ -634,6 +645,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 291ab9bb414d..5a8c2e707fde 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -29,59 +29,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a4000000 {
-			reg = <0x00 0xa4000000 0x00 0x00800000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	mux0: mux-controller-0 {
@@ -224,77 +182,6 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -537,3 +424,5 @@
 	pinctrl-names = "default";
 	phys = <&transceiver0>;
 };
+
+#include "k3-j7200-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..9477f1efbbc6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J7200 SoCs
+ *
+ * Copyright (C) 2020-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@a4000000 {
+		reg = <0x00 0xa4000000 0x00 0x00800000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index fb899c99753e..8040b6528c18 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -51,119 +51,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_0_dma_memory_region: c66-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_0_memory_region: c66-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_1_dma_memory_region: c66-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_1_memory_region: c66-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a8100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@aa000000 {
-			reg = <0x00 0xaa000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	gpio_keys: gpio-keys {
@@ -765,6 +663,7 @@
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -779,7 +678,7 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy0>;
 };
 
@@ -865,129 +764,4 @@
 	status = "disabled";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-
-	mbox_c66_0: mbox-c66-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c66_1: mbox-c66-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&c66_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
-	memory-region = <&c66_0_dma_memory_region>,
-			<&c66_0_memory_region>;
-};
-
-&c66_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
-	memory-region = <&c66_1_dma_memory_region>,
-			<&c66_1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
+#include "k3-j721e-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso
index 65a7e54f0884..e4e5f941f20b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso
@@ -15,12 +15,11 @@
 #include "k3-pinctrl.h"
 
 &{/} {
-	hdmi-connector {
+	connector-hdmi {
 		compatible = "hdmi-connector";
 		label = "hdmi";
 		type = "a";
 		ddc-i2c-bus = <&main_i2c1>;
-		digital;
 		/* P12 - HDMI_HPD */
 		hpd-gpios = <&exp6 10 GPIO_ACTIVE_HIGH>;
 
@@ -31,28 +30,32 @@
 		};
 	};
 
-	dvi-bridge {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	bridge-dvi {
 		compatible = "ti,tfp410";
 		/* P10 - HDMI_PDn */
 		powerdown-gpios = <&exp6 8 GPIO_ACTIVE_LOW>;
+		ti,deskew = <0>;
 
-		port@0 {
-			reg = <0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
 
-			tfp410_in: endpoint {
-				remote-endpoint = <&dpi_out0>;
-				pclk-sample = <1>;
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out0>;
+					pclk-sample = <1>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
+			port@1 {
+				reg = <1>;
 
-			tfp410_out: endpoint {
-				remote-endpoint =
-					<&hdmi_connector_in>;
+				tfp410_out: endpoint {
+					remote-endpoint =
+						<&hdmi_connector_in>;
+				};
 			};
 		};
 	};
@@ -148,17 +151,23 @@
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_vout0_pins_default>;
-};
 
-&dss_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	port@1 {
-		reg = <1>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&dp0_in>;
+			};
+		};
 
-		dpi_out0: endpoint {
-			remote-endpoint = <&tfp410_in>;
+		port@1 {
+			reg = <1>;
+			dpi_out0: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 4c1e02a4e7a2..47702fb279a4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -540,6 +540,7 @@
 		#phy-cells = <0>;
 		cdns,phy-type = <PHY_TYPE_USB3>;
 		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+		bootph-all;
 	};
 };
 
@@ -572,6 +573,7 @@
 &ospi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+	status = "okay";
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
@@ -767,6 +769,7 @@
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -778,7 +781,7 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy0>;
 };
 
@@ -803,7 +806,11 @@
 };
 
 &dss_ports {
-	port {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
 		dpi0_out: endpoint {
 			remote-endpoint = <&dp0_in>;
 		};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso
index f84aa9f94547..3bfe6036a8e6 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso
@@ -37,7 +37,7 @@
 &cpsw0_port1 {
 	status = "okay";
 	phy-handle = <&cpsw9g_phy12>;
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	mac-address = [00 00 00 00 00 00];
 	phys = <&cpsw0_phy_gmii_sel 1>;
 };
@@ -45,7 +45,7 @@
 &cpsw0_port2 {
 	status = "okay";
 	phy-handle = <&cpsw9g_phy15>;
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	mac-address = [00 00 00 00 00 00];
 	phys = <&cpsw0_phy_gmii_sel 2>;
 };
@@ -53,7 +53,7 @@
 &cpsw0_port3 {
 	status = "okay";
 	phy-handle = <&cpsw9g_phy0>;
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	mac-address = [00 00 00 00 00 00];
 	phys = <&cpsw0_phy_gmii_sel 3>;
 };
@@ -61,7 +61,7 @@
 &cpsw0_port4 {
 	status = "okay";
 	phy-handle = <&cpsw9g_phy3>;
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	mac-address = [00 00 00 00 00 00];
 	phys = <&cpsw0_phy_gmii_sel 4>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
index 4062709d6579..a8a502a6207f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
@@ -38,7 +38,7 @@
 		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <1>;
 		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie1-ep.dtso
new file mode 100644
index 000000000000..436085157a69
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie1-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 1>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes1_pcie_link>;
+		phy-names = "pcie-phy";
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index af3d730154ac..d5fd30a01032 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -44,6 +44,26 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
 
+		pcie0_ctrl: pcie-ctrl@4070 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4070 0x4>;
+		};
+
+		pcie1_ctrl: pcie-ctrl@4074 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4074 0x4>;
+		};
+
+		pcie2_ctrl: pcie-ctrl@4078 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4078 0x4>;
+		};
+
+		pcie3_ctrl: pcie-ctrl@407c {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x407c 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
 			reg = <0x4080 0x50>;
@@ -588,6 +608,9 @@
 		cdns_csi2rx0: csi-bridge@4504000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x0 0x4504000 0x0 0x1000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,
 				<&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -641,6 +664,9 @@
 		cdns_csi2rx1: csi-bridge@4514000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x0 0x4514000 0x0 0x1000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 27 2>, <&k3_clks 27 0>, <&k3_clks 27 2>,
 				 <&k3_clks 27 2>, <&k3_clks 27 3>, <&k3_clks 27 3>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -941,12 +967,12 @@
 		reg = <0x00 0x02900000 0x00 0x1000>,
 		      <0x00 0x02907000 0x00 0x400>,
 		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x10000000 0x00 0x00001000>;
+		      <0x40 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <2>;
 		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
@@ -959,8 +985,8 @@
 		device-id = <0xb00d>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
-			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x40 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x40 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		status = "disabled";
 	};
@@ -970,12 +996,12 @@
 		reg = <0x00 0x02910000 0x00 0x1000>,
 		      <0x00 0x02917000 0x00 0x400>,
 		      <0x00 0x0d800000 0x00 0x00800000>,
-		      <0x00 0x18000000 0x00 0x00001000>;
+		      <0x41 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <2>;
 		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
@@ -988,8 +1014,8 @@
 		device-id = <0xb00d>;
 		msi-map = <0x0 &gic_its 0x10000 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x18001000 0x0 0x18001000 0x0 0x0010000>,
-			 <0x02000000 0x0 0x18011000 0x0 0x18011000 0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x41 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x41 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		status = "disabled";
 	};
@@ -1004,7 +1030,7 @@
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
+		ti,syscon-pcie-ctrl = <&pcie2_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <2>;
 		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
@@ -1033,7 +1059,7 @@
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
+		ti,syscon-pcie-ctrl = <&pcie3_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <2>;
 		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
@@ -1861,6 +1887,45 @@
 		};
 	};
 
+	dphy2: phy@4480000 {
+		compatible = "ti,j721e-dphy";
+		reg = <0x00 0x04480000 0x00 0x1000>;
+		clocks = <&k3_clks 296 1>, <&k3_clks 296 3>;
+		clock-names = "psm", "pll_ref";
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 296 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 296 3>;
+		assigned-clock-parents = <&k3_clks 296 4>;
+		assigned-clock-rates = <19200000>;
+		status = "disabled";
+	};
+
+	dsi0: dsi@4800000 {
+		compatible = "ti,j721e-dsi";
+		reg = <0x00 0x04800000 0x00 0x100000>, <0x00 0x04710000 0x00 0x100>;
+		clocks = <&k3_clks 150 1>, <&k3_clks 150 5>;
+		clock-names = "dsi_p_clk", "dsi_sys_clk";
+		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&dphy2>;
+		phy-names = "dphy";
+		status = "disabled";
+
+		dsi0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	dss: dss@4a00000 {
 		compatible = "ti,j721e-dss";
 		reg =
@@ -2156,6 +2221,7 @@
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
 			 <0x5d00000 0x00 0x5d00000 0x20000>;
 		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss0_core0: r5f@5c00000 {
 			compatible = "ti,j721e-r5f";
@@ -2170,6 +2236,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss0_core1: r5f@5d00000 {
@@ -2185,6 +2252,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -2196,6 +2264,7 @@
 		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
 			 <0x5f00000 0x00 0x5f00000 0x20000>;
 		power-domains = <&k3_pds 244 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss1_core0: r5f@5e00000 {
 			compatible = "ti,j721e-r5f";
@@ -2210,6 +2279,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss1_core1: r5f@5f00000 {
@@ -2225,6 +2295,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index b02142b2b460..d5e5e89be5e9 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -551,6 +551,8 @@
 			    "tx4", "tx5", "tx6", "tx7",
 			    "rx";
 
+		status = "disabled";
+
 		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -594,6 +596,7 @@
 		ranges = <0x41000000 0x00 0x41000000 0x20000>,
 			 <0x41400000 0x00 0x41400000 0x20000>;
 		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		mcu_r5fss0_core0: r5f@41000000 {
 			compatible = "ti,j721e-r5f";
@@ -608,6 +611,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		mcu_r5fss0_core1: r5f@41400000 {
@@ -623,6 +627,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
index 47bb5480b5b0..4eb3cffab032 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk-csi2-dual-imx219.dtso
@@ -19,6 +19,33 @@
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdd_sd_dv>;
+		regulator-always-on;
+	};
 };
 
 &csi_mux {
@@ -34,7 +61,9 @@
 		reg = <0x10>;
 
 		clocks = <&clk_imx219_fixed>;
-		clock-names = "xclk";
+		VANA-supply = <&reg_2p8v>;
+		VDIG-supply = <&reg_1p8v>;
+		VDDL-supply = <&reg_1p2v>;
 
 		port {
 			csi2_cam0: endpoint {
@@ -56,7 +85,9 @@
 		reg = <0x10>;
 
 		clocks = <&clk_imx219_fixed>;
-		clock-names = "xclk";
+		VANA-supply = <&reg_2p8v>;
+		VDIG-supply = <&reg_1p8v>;
+		VDDL-supply = <&reg_1p2v>;
 
 		port {
 			csi2_cam1: endpoint {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 69b3d1ed8a21..050776cb4df8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -48,119 +48,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_0_dma_memory_region: c66-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_0_memory_region: c66-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_1_dma_memory_region: c66-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_1_memory_region: c66-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a8100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@aa000000 {
-			reg = <0x00 0xaa000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	vusb_main: fixedregulator-vusb-main5v0 {
@@ -184,6 +82,17 @@
 		regulator-boot-on;
 	};
 
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_mmc1: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -211,6 +120,20 @@
 			 <3300000 0x1>;
 	};
 
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 118 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
 	transceiver1: can-phy1 {
 		compatible = "ti,tcan1042";
 		#phy-cells = <0>;
@@ -551,6 +474,12 @@
 			J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */
 		>;
 	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */
+		>;
+	};
 };
 
 &wkup_pmx0 {
@@ -1040,6 +969,7 @@
 		#phy-cells = <0>;
 		cdns,phy-type = <PHY_TYPE_USB3>;
 		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+		bootph-all;
 	};
 };
 
@@ -1104,6 +1034,7 @@
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -1115,7 +1046,7 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy0>;
 };
 
@@ -1247,166 +1178,4 @@
 	status = "disabled";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-
-	mbox_c66_0: mbox-c66-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c66_1: mbox-c66-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer12 {
-	status = "reserved";
-};
-
-&main_timer13 {
-	status = "reserved";
-};
-
-&main_timer14 {
-	status = "reserved";
-};
-
-&main_timer15 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&c66_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
-	memory-region = <&c66_0_dma_memory_region>,
-			<&c66_0_memory_region>;
-};
-
-&c66_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
-	memory-region = <&c66_1_dma_memory_region>,
-			<&c66_1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
+#include "k3-j721e-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 0722f6361cc8..c8073ee634b7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -29,119 +29,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_0_memory_region: c66-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_1_memory_region: c66-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a8100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@aa000000 {
-			reg = <0x00 0xaa000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 };
 
@@ -484,166 +382,4 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-
-	mbox_c66_0: mbox-c66-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c66_1: mbox-c66-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer12 {
-	status = "reserved";
-};
-
-&main_timer13 {
-	status = "reserved";
-};
-
-&main_timer14 {
-	status = "reserved";
-};
-
-&main_timer15 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&c66_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
-	memory-region = <&c66_0_dma_memory_region>,
-			<&c66_0_memory_region>;
-};
-
-&c66_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
-	memory-region = <&c66_1_dma_memory_region>,
-			<&c66_1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
+#include "k3-j721e-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..40c6cc99c405
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-ti-ipc-firmware.dtsi
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J721E SoCs
+ *
+ * Copyright (C) 2018-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_dma_memory_region: memory@a4000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_memory_region: memory@a4100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_dma_memory_region: memory@a5000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_memory_region: memory@a5100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	/* Carveout locations are flipped due to caching */
+	c66_1_dma_memory_region: memory@a6000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c66_0_memory_region: memory@a6100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	/* Carveout locations are flipped due to caching */
+	c66_0_dma_memory_region: memory@a7000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c66_1_memory_region: memory@a7100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_0_dma_memory_region: memory@a8000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa8000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_0_memory_region: memory@a8100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa8100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@aa000000 {
+		reg = <0x00 0xaa000000 0x00 0x01c00000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&main_timer12 {
+	status = "reserved";
+};
+
+&main_timer13 {
+	status = "reserved";
+};
+
+&main_timer14 {
+	status = "reserved";
+};
+
+&main_timer15 {
+	status = "reserved";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0 {
+	status = "okay";
+	ti,cluster-mode = <0>;
+};
+
+&main_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1 {
+	status = "okay";
+	ti,cluster-mode = <0>;
+};
+
+&main_r5fss1_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index a7f2f52f42f7..b6e22c242951 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -126,6 +126,8 @@
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
 			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
 			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x40 0x00000000 0x40 0x00000000 0x01 0x00000000>, /* PCIe0 DAT1 */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
 			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
 			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
 			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index e2fc1288ed07..4fea99519113 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -93,6 +93,28 @@
 			 <3300000 0x1>;
 	};
 
+	dp1_pwr_3v3: regulator-dp1-prw {
+		compatible = "regulator-fixed";
+		regulator-name = "dp1-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp4 1 GPIO_ACTIVE_HIGH>; /* P1 - DP1_PWR_SW_EN */
+		enable-active-high;
+	};
+
+	dp1: connector-dp1 {
+		compatible = "dp-connector";
+		label = "DP1";
+		type = "full-size";
+		dp-pwr-supply = <&dp1_pwr_3v3>;
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&dp1_out>;
+			};
+		};
+	};
+
 	transceiver1: can-phy1 {
 		compatible = "ti,tcan1043";
 		#phy-cells = <0>;
@@ -148,6 +170,13 @@
 		>;
 	};
 
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) I2C4_SCL */
+			J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) I2C4_SDA */
+		>;
+	};
+
 	main_i2c5_pins_default: main-i2c5-default-pins {
 		pinctrl-single,pins = <
 			J721S2_IOPAD(0x01c, PIN_INPUT, 8) /* (Y24) MCAN15_TX.I2C5_SCL */
@@ -370,6 +399,23 @@
 	};
 };
 
+&main_i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+	clock-frequency = <400000>;
+
+	exp4: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "DP0_PWR_SW_EN", "DP1_PWR_SW_EN", "UB981_PDB",
+				  "UB981_GPIO0", "UB981_GPIO1", "UB981_GPIO2",
+				  "UB981_GPIO3", "PWR_SW_CNTL_DSI0#";
+	};
+};
+
 &main_i2c5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c5_pins_default>;
@@ -411,6 +457,7 @@
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -423,7 +470,7 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&phy0>;
 };
 
@@ -539,3 +586,74 @@
 	pinctrl-0 = <&main_mcan5_pins_default>;
 	phys = <&transceiver4>;
 };
+
+&dss {
+	/*
+	 * DSS on J721S2-EVM supports DP on VP0 and DSI on VP2.
+	 * These clock assignments are chosen to enable the following outputs:
+	 * VP0 - DisplayPort SST
+	 * VP2 - DSI
+	 */
+	status = "okay";
+	assigned-clocks = <&k3_clks 158 2>,
+			  <&k3_clks 158 14>;
+	assigned-clock-parents = <&k3_clks 158 3>,
+				 <&k3_clks 158 16>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@2 {
+		reg = <2>;
+
+		dpi2_out: endpoint {
+			remote-endpoint = <&dsi0_in>;
+		};
+	};
+};
+
+&dsi0_ports {
+	port@0 {
+		reg = <0>;
+
+		dsi0_out: endpoint {
+			remote-endpoint = <&dp1_in>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dsi0_in: endpoint {
+			remote-endpoint = <&dpi2_out>;
+		};
+	};
+};
+
+&dsi_edp_bridge_ports {
+	port@0 {
+		reg = <0>;
+
+		dp1_in: endpoint {
+			remote-endpoint = <&dsi0_out>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dp1_out: endpoint {
+			remote-endpoint = <&dp1_connector_in>;
+		};
+	};
+};
+
+&dphy_tx0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso
index 8583178fa1f3..6869a95c6214 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso
@@ -80,6 +80,6 @@
 
 &main_cpsw_port1 {
 	status = "okay";
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&main_cpsw_phy0>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
index 5ff390915b75..8c2cd99cf2b4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
@@ -38,7 +38,7 @@
 		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
-		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <1>;
 		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-usb0-type-a.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-usb0-type-a.dtso
new file mode 100644
index 000000000000..fe4a23efe708
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-usb0-type-a.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling USB0 instance of USB in the Host Mode of operation
+ * with the Type-A Connector on the J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&exp_som {
+	p0-hog {
+		/* P0 - USB2.0_MUX_SEL */
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "USB2.0_MUX_SEL";
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 92bf48fdbeba..80c51b11ac9f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -57,6 +57,11 @@
 			#phy-cells = <1>;
 		};
 
+		pcie1_ctrl: pcie-ctrl@74 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x74 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller@80 {
 			compatible = "reg-mux";
 			reg = <0x80 0x10>;
@@ -1243,6 +1248,9 @@
 		cdns_csi2rx0: csi-bridge@4504000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04504000 0x00 0x1000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 38 3>, <&k3_clks 38 1>, <&k3_clks 38 3>,
 				<&k3_clks 38 3>, <&k3_clks 38 4>, <&k3_clks 38 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1296,6 +1304,9 @@
 		cdns_csi2rx1: csi-bridge@4514000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04514000 0x00 0x1000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 39 3>, <&k3_clks 39 1>, <&k3_clks 39 3>,
 				<&k3_clks 39 3>, <&k3_clks 39 4>, <&k3_clks 39 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1394,12 +1405,12 @@
 		reg = <0x00 0x02910000 0x00 0x1000>,
 		      <0x00 0x02917000 0x00 0x400>,
 		      <0x00 0x0d800000 0x00 0x800000>,
-		      <0x00 0x18000000 0x00 0x1000>;
+		      <0x41 0x00000000 0x00 0x1000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
 		device_type = "pci";
-		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
 		max-link-speed = <3>;
 		num-lanes = <4>;
 		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
@@ -1412,8 +1423,8 @@
 		device-id = <0xb013>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
-			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x41 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x41 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
@@ -1426,6 +1437,7 @@
 
 		pcie1_intc: interrupt-controller {
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&gic500>;
 			interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>;
@@ -1790,6 +1802,45 @@
 		status = "disabled";
 	};
 
+	dphy_tx0: phy@4480000 {
+		compatible = "ti,j721e-dphy";
+		reg = <0x00 0x04480000 0x00 0x00001000>;
+		clocks = <&k3_clks 363 8>, <&k3_clks 363 14>;
+		clock-names = "psm", "pll_ref";
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 363 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 363 14>;
+		assigned-clock-parents = <&k3_clks 363 15>;
+		assigned-clock-rates = <19200000>;
+		status = "disabled";
+	};
+
+	dsi0: dsi@4800000 {
+		compatible = "ti,j721e-dsi";
+		reg = <0x00 0x04800000 0x00 0x00100000>,
+		      <0x00 0x04710000 0x00 0x00000100>;
+		clocks = <&k3_clks 154 4>, <&k3_clks 154 1>;
+		clock-names = "dsi_p_clk", "dsi_sys_clk";
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&dphy_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+
+		dsi0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	dss: dss@4a00000 {
 		compatible = "ti,j721e-dss";
 		reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
@@ -1844,6 +1895,7 @@
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
 			 <0x5d00000 0x00 0x5d00000 0x20000>;
 		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss0_core0: r5f@5c00000 {
 			compatible = "ti,j721s2-r5f";
@@ -1858,6 +1910,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss0_core1: r5f@5d00000 {
@@ -1873,6 +1926,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -1884,6 +1938,7 @@
 		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
 			 <0x5f00000 0x00 0x5f00000 0x20000>;
 		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss1_core0: r5f@5e00000 {
 			compatible = "ti,j721s2-r5f";
@@ -1898,6 +1953,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss1_core1: r5f@5f00000 {
@@ -1913,6 +1969,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -2048,4 +2105,108 @@
 		/* reserved for MAIN_R5F1_1 */
 		status = "reserved";
 	};
+
+	gpu: gpu@4e20000000 {
+		compatible = "ti,j721s2-gpu", "img,img-bxs-4-64", "img,img-rogue";
+		reg = <0x4e 0x20000000 0x00 0x80000>;
+		clocks = <&k3_clks 130 1>;
+		clock-names = "core";
+		assigned-clocks = <&k3_clks 130 1>;
+		assigned-clock-rates = <800000000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>,
+				<&k3_pds 373 TI_SCI_PD_EXCLUSIVE>;
+		power-domain-names = "a", "b";
+		dma-coherent;
+	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 209 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 209 0>;
+		assigned-clock-parents = <&k3_clks 209 1>;
+		power-domains = <&k3_pds 209 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 210 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 210 0>;
+		assigned-clock-parents = <&k3_clks 210 1>;
+		power-domains = <&k3_pds 210 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 211 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 211 0>;
+		assigned-clock-parents = <&k3_clks 211 1>;
+		power-domains = <&k3_pds 211 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp3: mcasp@2b30000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b30000 0x00 0x2000>,
+		      <0x00 0x02b38000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc403>, <&main_udmap 0x4403>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 212 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 212 0>;
+		assigned-clock-parents = <&k3_clks 212 1>;
+		power-domains = <&k3_pds 212 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp4: mcasp@2b40000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b40000 0x00 0x2000>,
+		      <0x00 0x02b48000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc404>, <&main_udmap 0x4404>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 213 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 213 0>;
+		assigned-clock-parents = <&k3_clks 213 1>;
+		power-domains = <&k3_pds 213 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index bc31266126d0..2a7f9c519735 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -552,6 +552,8 @@
 			    "tx4", "tx5", "tx6", "tx7",
 			    "rx";
 
+		status = "disabled";
+
 		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -690,6 +692,7 @@
 		ranges = <0x41000000 0x00 0x41000000 0x20000>,
 			 <0x41400000 0x00 0x41400000 0x20000>;
 		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		mcu_r5fss0_core0: r5f@41000000 {
 			compatible = "ti,j721s2-r5f";
@@ -704,6 +707,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		mcu_r5fss0_core1: r5f@41400000 {
@@ -719,6 +723,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index b3a0385ed3d8..12a38dd1514b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -31,107 +31,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_1_dma_memory_region: c71-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_1_memory_region: c71-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a8000000 {
-			reg = <0x00 0xa8000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	mux0: mux-controller-0 {
@@ -152,6 +62,30 @@
 		#phy-cells = <0>;
 		max-bitrate = <5000000>;
 	};
+
+	vsys_io_1v8: regulator-vsys-io-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_io_1v2: regulator-vsys-io-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	edp1_refclk: clock-edp1-refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+		#clock-cells = <0>;
+	};
 };
 
 &wkup_pmx0 {
@@ -448,144 +382,75 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <4>;
-	};
-};
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
 
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
 
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
 
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
 
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
 
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
 
-	mbox_c71_1: mbox-c71-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
 	};
 };
 
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer3 {
-	status = "reserved";
-};
-
-&main_timer4 {
-	status = "reserved";
-};
-
-&main_timer5 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
+&main_i2c4 {
+	bridge_dsi_edp: bridge-dsi-edp@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		clock-names = "refclk";
+		clocks = <&edp1_refclk>;
+		enable-gpios = <&exp_som 5 0>;
+		vpll-supply = <&vsys_io_1v8>;
+		vccio-supply = <&vsys_io_1v8>;
+		vcca-supply = <&vsys_io_1v2>;
+		vcc-supply = <&vsys_io_1v2>;
+
+		dsi_edp_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
 
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
 };
 
-&c71_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
-	memory-region = <&c71_1_dma_memory_region>,
-			<&c71_1_memory_region>;
-};
+#include "k3-j721s2-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..ebab0cc580bb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-ti-ipc-firmware.dtsi
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J721S2 SoCs
+ *
+ * Copyright (C) 2021-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_dma_memory_region: memory@a4000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_memory_region: memory@a4100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_dma_memory_region: memory@a5000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_memory_region: memory@a5100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_0_dma_memory_region: memory@a6000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_0_memory_region: memory@a6100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_1_dma_memory_region: memory@a7000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_1_memory_region: memory@a7100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@a8000000 {
+		reg = <0x00 0xa8000000 0x00 0x01c00000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&main_timer3 {
+	status = "reserved";
+};
+
+&main_timer4 {
+	status = "reserved";
+};
+
+&main_timer5 {
+	status = "reserved";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss1 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+	status = "okay";
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso b/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso
new file mode 100644
index 000000000000..4107ef8c7b74
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DT Overlay for 4 x RPi Camera V2.1 on J722S-EVM board.
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Schematics: https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&main_pmx0 {
+	cam0_reset_pins_default: cam0-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x03c, PIN_OUTPUT, 7) /* (R22) GPIO0_15 */
+		>;
+	};
+
+	cam1_reset_pins_default: cam1-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x044, PIN_OUTPUT, 7) /* (R26) GPIO0_17 */
+		>;
+	};
+
+	cam2_reset_pins_default: cam2-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x04c, PIN_OUTPUT, 7) /* (T25) GPIO0_19 */
+		>;
+	};
+
+	cam3_reset_pins_default: cam3-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x054, PIN_OUTPUT, 7) /* (T21) GPIO0_21 */
+		>;
+	};
+};
+
+&{/} {
+	clk_imx219_fixed: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+};
+
+&csi01_mux {
+	idle-state = <1>;
+};
+
+&csi23_mux {
+	idle-state = <1>;
+};
+
+&pca9543_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* CAM0 I2C */
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		imx219_0: sensor@10 {
+			compatible = "sony,imx219";
+			reg = <0x10>;
+
+			clocks = <&clk_imx219_fixed>;
+
+			VANA-supply = <&reg_2p8v>;
+			VDIG-supply = <&reg_1p8v>;
+			VDDL-supply = <&reg_1p2v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam0_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam0: endpoint {
+					remote-endpoint = <&csi2rx0_in_sensor>;
+					link-frequencies = /bits/ 64 <456000000>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+
+	/* CAM1 I2C */
+	i2c@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		imx219_1: sensor@10 {
+			compatible = "sony,imx219";
+			reg = <0x10>;
+
+			clocks = <&clk_imx219_fixed>;
+
+			VANA-supply = <&reg_2p8v>;
+			VDIG-supply = <&reg_1p8v>;
+			VDDL-supply = <&reg_1p2v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam1_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam1: endpoint {
+					remote-endpoint = <&csi2rx1_in_sensor>;
+					link-frequencies = /bits/ 64 <456000000>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+};
+
+&pca9543_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* CAM0 I2C */
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		imx219_2: sensor@10 {
+			compatible = "sony,imx219";
+			reg = <0x10>;
+
+			clocks = <&clk_imx219_fixed>;
+
+			VANA-supply = <&reg_2p8v>;
+			VDIG-supply = <&reg_1p8v>;
+			VDDL-supply = <&reg_1p2v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam2_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 19 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam2: endpoint {
+					remote-endpoint = <&csi2rx2_in_sensor>;
+					link-frequencies = /bits/ 64 <456000000>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+
+	/* CAM1 I2C */
+	i2c@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		imx219_3: sensor@10 {
+			compatible = "sony,imx219";
+			reg = <0x10>;
+
+			clocks = <&clk_imx219_fixed>;
+
+			VANA-supply = <&reg_2p8v>;
+			VDIG-supply = <&reg_1p8v>;
+			VDDL-supply = <&reg_1p2v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam3_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam3: endpoint {
+					remote-endpoint = <&csi2rx3_in_sensor>;
+					link-frequencies = /bits/ 64 <456000000>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx1 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi1_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx1_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam1>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx2 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi2_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx2_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam2>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx3 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi3_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx3_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam3>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx1 {
+	status = "okay";
+};
+
+&dphy1 {
+	status = "okay";
+};
+
+&ti_csi2rx2 {
+	status = "okay";
+};
+
+&dphy2 {
+	status = "okay";
+};
+
+&ti_csi2rx3 {
+	status = "okay";
+};
+
+&dphy3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso
new file mode 100644
index 000000000000..575113d7b481
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DT Overlay for 4 x TEVI OV5640 MIPI Camera module on J722S-EVM board.
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&main_pmx0 {
+	cam0_reset_pins_default: cam0-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x03c, PIN_OUTPUT, 7) /* (R22) GPIO0_15 */
+		>;
+	};
+
+	cam1_reset_pins_default: cam1-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x044, PIN_OUTPUT, 7) /* (R26) GPIO0_17 */
+		>;
+	};
+
+	cam2_reset_pins_default: cam2-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x04c, PIN_OUTPUT, 7) /* (T25) GPIO0_19 */
+		>;
+	};
+
+	cam3_reset_pins_default: cam3-default-reset-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x054, PIN_OUTPUT, 7) /* (T21) GPIO0_21 */
+		>;
+	};
+};
+
+&{/} {
+	clk_ov5640_fixed: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3_exp>;
+		regulator-always-on;
+	};
+};
+
+&csi01_mux {
+	idle-state = <1>;
+};
+
+&csi23_mux {
+	idle-state = <1>;
+};
+
+&pca9543_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* CAM0 I2C */
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ov5640_0: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			clocks = <&clk_ov5640_fixed>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_2p8v>;
+			DOVDD-supply = <&reg_1p8v>;
+			DVDD-supply = <&reg_3p3v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam0_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam0: endpoint {
+					remote-endpoint = <&csi2rx0_in_sensor>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+
+	/* CAM1 I2C */
+	i2c@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		ov5640_1: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			clocks = <&clk_ov5640_fixed>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_2p8v>;
+			DOVDD-supply = <&reg_1p8v>;
+			DVDD-supply = <&reg_3p3v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam1_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam1: endpoint {
+					remote-endpoint = <&csi2rx1_in_sensor>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+};
+
+&pca9543_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* CAM0 I2C */
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ov5640_2: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			clocks = <&clk_ov5640_fixed>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_2p8v>;
+			DOVDD-supply = <&reg_1p8v>;
+			DVDD-supply = <&reg_3p3v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam2_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 19 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam2: endpoint {
+					remote-endpoint = <&csi2rx2_in_sensor>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+
+	/* CAM1 I2C */
+	i2c@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		ov5640_3: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			clocks = <&clk_ov5640_fixed>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_2p8v>;
+			DOVDD-supply = <&reg_1p8v>;
+			DVDD-supply = <&reg_3p3v>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cam3_reset_pins_default>;
+
+			reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+
+			port {
+				csi2_cam3: endpoint {
+					remote-endpoint = <&csi2rx3_in_sensor>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx1 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi1_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx1_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam1>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx2 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi2_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx2_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam2>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx3 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi3_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx3_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam3>;
+				bus-type = <4>; /* CSI2 DPHY */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx1 {
+	status = "okay";
+};
+
+&dphy1 {
+	status = "okay";
+};
+
+&ti_csi2rx2 {
+	status = "okay";
+};
+
+&dphy2 {
+	status = "okay";
+};
+
+&ti_csi2rx3 {
+	status = "okay";
+};
+
+&dphy3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index a00f4a7d20d9..7baf5764862b 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -52,71 +52,17 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		wkup_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c7x_0_dma_memory_region: c7x-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c7x_0_memory_region: c7x-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c7x_1_dma_memory_region: c7x-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c7x_1_memory_region: c7x-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a5000000 {
-			reg = <0x00 0xa5000000 0x00 0x1c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	vmain_pd: regulator-0 {
@@ -141,6 +87,17 @@
 		regulator-boot-on;
 	};
 
+	vsys_3v3: regulator-vsys3v3 {
+		/* output of LM5141-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_mmc1: regulator-mmc1 {
 		/* TPS22918DBVR */
 		compatible = "regulator-fixed";
@@ -153,6 +110,17 @@
 		bootph-all;
 	};
 
+	vsys_3v3_exp: regulator-TPS22990 {
+		/* output of TPS22990 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3_exp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_sd_dv: regulator-TLV71033 {
 		compatible = "regulator-gpio";
 		regulator-name = "tlv71033";
@@ -244,6 +212,33 @@
 		max-bitrate = <5000000>;
 		standby-gpios = <&exp1 17 GPIO_ACTIVE_HIGH>;
 	};
+
+	csi01_mux: mux-controller-0 {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
+
+	csi23_mux: mux-controller-1 {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp1 7 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
+};
+
+&audio_refclk1 {
+	assigned-clocks = <&k3_clks 157 0>;
+	assigned-clock-parents = <&k3_clks 157 15>;
+};
+
+&cpsw_mac_syscon {
+	bootph-all;
+};
+
+&phy_gmii_sel {
+	bootph-all;
 };
 
 &main_pmx0 {
@@ -263,6 +258,13 @@
 		bootph-all;
 	};
 
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (P22) GPMC0_CSn2.I2C2_SCL */
+			J722S_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (P23) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
 	main_uart0_pins_default: main-uart0-default-pins {
 		pinctrl-single,pins = <
 			J722S_IOPAD(0x01c8, PIN_INPUT, 0)	/* (A22) UART0_RXD */
@@ -303,6 +305,7 @@
 			J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */
 			J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
@@ -337,6 +340,7 @@
 			J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
 			J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	main_usb1_pins_default: main-usb1-default-pins {
@@ -359,6 +363,13 @@
 			J722S_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
 		>;
 	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x030, PIN_INPUT, 7) /* (K23) GPIO0_12 */
+		>;
+	};
+
 };
 
 &cpsw3g {
@@ -374,6 +385,7 @@
 
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
@@ -381,9 +393,10 @@
 };
 
 &cpsw_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&cpsw3g_phy0>;
 	status = "okay";
+	bootph-all;
 };
 
 &main_gpio1 {
@@ -406,6 +419,13 @@
 
 &mcu_pmx0 {
 
+	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J722S_MCU_IOPAD(0x048, PIN_INPUT, 0) /* (E11) MCU_I2C0_SDA */
+			J722S_MCU_IOPAD(0x044, PIN_INPUT, 0) /* (B13) MCU_I2C0_SCL */
+		>;
+	};
+
 	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
 		pinctrl-single,pins = <
 			J722S_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (D8) MCU_MCAN0_RX */
@@ -459,6 +479,87 @@
 	clock-frequency = <400000>;
 	status = "okay";
 	bootph-all;
+
+	tps65224: pmic@48 {
+		compatible = "ti,tps65224-q1";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		ti,primary-pmic;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		buck12-supply = <&vsys_io_3v3>;
+		buck3-supply = <&vsys_io_3v3>;
+		buck4-supply = <&vsys_io_3v3>;
+
+		ldo1-supply = <&vsys_io_3v3>;
+		ldo2-supply = <&vsys_io_3v3>;
+		ldo3-supply = <&vsys_io_3v3>;
+
+		regulators {
+
+			buck1: buck1 {
+				regulator-name = "vcc1v8_io_buck1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-all;
+			};
+
+			buck2: buck2 {
+				regulator-name = "vcc1v1_ddr_buck2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3: buck3 {
+				regulator-name = "vcc0v85_ram_buck3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: buck4 {
+				regulator-name = "vcc0v75_ioret_buck4";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: ldo1 {
+				regulator-name = "vdda1v8_pll_ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: ldo2 {
+				regulator-name = "dvdd3v3_ldo2";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: ldo3 {
+				regulator-name = "vdd1v85_phy_ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+	       };
+	};
 };
 
 &k3_clks {
@@ -495,8 +596,8 @@
 		p05-hog {
 			/* P05 - USB2.0_MUX_SEL */
 			gpio-hog;
-			gpios = <5 GPIO_ACTIVE_HIGH>;
-			output-high;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
 		};
 
 		p01_hog: p01-hog {
@@ -536,6 +637,27 @@
 	};
 };
 
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+
+	pca9543_0: i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+	};
+
+	pca9543_1: i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+	};
+};
+
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
@@ -617,111 +739,16 @@
 	bootph-all;
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_wkup_r5_0: mbox-wkup-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-
-	mbox_mcu_r5_0: mbox-mcu-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_c7x_0: mbox-c7x-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-
-	mbox_main_r5_0: mbox-main-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c7x_1: mbox-c7x-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0 {
-	status = "okay";
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0 {
-	status = "okay";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&c7x_0 {
-	mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
-	memory-region = <&c7x_0_dma_memory_region>,
-			<&c7x_0_memory_region>;
-	status = "okay";
-};
-
-&c7x_1 {
-	mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
-	memory-region = <&c7x_1_dma_memory_region>,
-			<&c7x_1_memory_region>;
-	status = "okay";
-};
-
 &serdes_ln_ctrl {
 	idle-states = <J722S_SERDES0_LANE0_USB>,
 		      <J722S_SERDES1_LANE0_PCIE0_LANE0>;
 };
 
-&serdes0 {
+&serdes_wiz0 {
 	status = "okay";
+};
+
+&serdes0 {
 	serdes0_usb_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <1>;
@@ -731,8 +758,11 @@
 	};
 };
 
-&serdes1 {
+&serdes_wiz1 {
 	status = "okay";
+};
+
+&serdes1 {
 	serdes1_pcie_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <1>;
@@ -759,6 +789,10 @@
 	usb-role-switch;
 };
 
+&usb0_phy_ctrl {
+	bootph-all;
+};
+
 &usbss1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_usb1_pins_default>;
@@ -812,3 +846,12 @@
 &mcu_gpio0 {
 	status = "okay";
 };
+
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+#include "k3-j722s-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 3ac2d45a0558..873415ec4fa3 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -32,6 +32,8 @@
 		assigned-clocks = <&k3_clks 279 1>;
 		assigned-clock-parents = <&k3_clks 279 5>;
 
+		status = "disabled";
+
 		serdes0: serdes@f000000 {
 			compatible = "ti,j721e-serdes-10g";
 			reg = <0x0f000000 0x00010000>;
@@ -50,8 +52,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#clock-cells = <1>;
-
-			status = "disabled"; /* Needs lane config */
 		};
 	};
 
@@ -70,6 +70,8 @@
 		assigned-clocks = <&k3_clks 280 1>;
 		assigned-clock-parents = <&k3_clks 280 5>;
 
+		status = "disabled";
+
 		serdes1: serdes@f010000 {
 			compatible = "ti,j721e-serdes-10g";
 			reg = <0x0f010000 0x00010000>;
@@ -88,8 +90,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#clock-cells = <1>;
-
-			status = "disabled"; /* Needs lane config */
 		};
 	};
 
@@ -98,10 +98,10 @@
 		reg = <0x00 0x0f102000 0x00 0x1000>,
 		      <0x00 0x0f100000 0x00 0x400>,
 		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x68000000 0x00 0x00001000>;
+		      <0x06 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
-		ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
-			 <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x06 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x06 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
@@ -154,6 +154,198 @@
 		};
 	};
 
+	ti_csi2rx1: ticsi2rx@30122000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x30122000 0x00 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x5100 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 247 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx1: csi-bridge@30121000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30121000 0x00 0x1000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
+			clocks = <&k3_clks 247 0>, <&k3_clks 247 3>, <&k3_clks 247 0>,
+				 <&k3_clks 247 0>, <&k3_clks 247 4>, <&k3_clks 247 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				      "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy1>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi1_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi1_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi1_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi1_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi1_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	ti_csi2rx2: ticsi2rx@30142000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x30142000 0x00 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+		dmas = <&main_bcdma_csi 0 0x5200 0>;
+		dma-names = "rx0";
+		status = "disabled";
+
+		cdns_csi2rx2: csi-bridge@30141000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30141000 0x00 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
+			clocks = <&k3_clks 248 0>, <&k3_clks 248 3>, <&k3_clks 248 0>,
+				 <&k3_clks 248 0>, <&k3_clks 248 4>, <&k3_clks 248 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				      "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy2>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi2_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi2_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi2_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi2_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	ti_csi2rx3: ticsi2rx@30162000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x30162000 0x00 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x5300 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx3: csi-bridge@30161000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30161000 0x00 0x1000>;
+			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
+			clocks = <&k3_clks 249 0>, <&k3_clks 249 3>, <&k3_clks 249 0>,
+				 <&k3_clks 249 0>, <&k3_clks 249 4>, <&k3_clks 249 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				      "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy3>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi3_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi3_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi3_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi3_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi3_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy1: phy@30130000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30130000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 251 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	dphy2: phy@30150000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30150000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	dphy3: phy@30170000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30170000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
 	main_r5fss0: r5fss@78400000 {
 		compatible = "ti,am62-r5fss";
 		#address-cells = <1>;
@@ -176,6 +368,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -202,6 +395,26 @@
 		ti,sci-proc-ids = <0x31 0xff>;
 		status = "disabled";
 	};
+
+	e5010: jpeg-encoder@fd20000 {
+		compatible = "ti,am62a-jpeg-enc", "img,e5010-jpeg-enc";
+		reg = <0x00 0xfd20000 0x00 0x100>,
+		      <0x00 0xfd20200 0x00 0x200>;
+		reg-names = "core", "mmu";
+		clocks = <&k3_clks 201 0>;
+		power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&main_bcdma_csi {
+	compatible = "ti,j722s-dmss-bcdma-csi";
+	reg = <0x00 0x4e230000 0x00 0x100>,
+	      <0x00 0x4e180000 0x00 0x20000>,
+	      <0x00 0x4e300000 0x00 0x10000>,
+	      <0x00 0x4e100000 0x00 0x80000>;
+	reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+	ti,sci-rm-range-tchan = <0x22>;
 };
 
 /* MCU domain overrides */
@@ -224,15 +437,6 @@
 		mux-reg-masks = <0x00 0x3>, /* SERDES0 lane0 select */
 				<0x10 0x3>; /* SERDES1 lane0 select */
 	};
-
-	audio_refclk1: clock@82e4 {
-		compatible = "ti,am62-audio-refclk";
-		reg = <0x82e4 0x4>;
-		clocks = <&k3_clks 157 18>;
-		assigned-clocks = <&k3_clks 157 18>;
-		assigned-clock-parents = <&k3_clks 157 33>;
-		#clock-cells = <0>;
-	};
 };
 
 &wkup_conf {
@@ -251,21 +455,6 @@
 	ti,interrupt-ranges = <7 71 21>;
 };
 
-&main_pmx0 {
-	pinctrl-single,gpio-range =
-		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 72 17 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 101 25 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>;
-
-	main_pmx0_range: gpio-range {
-		#pinctrl-single,gpio-range-cells = <3>;
-	};
-};
-
 &main_gpio0 {
 	gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>,
 			<&main_pmx0 70 72 17>;
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..cb7cd385a165
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J722S SoCs
+ *
+ * Copyright (C) 2024-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core0_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core0_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c7x_0_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c7x_0_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c7x_1_dma_memory_region: memory@a4000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c7x_1_memory_region: memory@a4100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@a5000000 {
+		reg = <0x00 0xa5000000 0x00 0x1c00000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_wkup_r5_0: mbox-wkup-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+
+	mbox_main_r5_0: mbox-main-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c7x_1: mbox-c7x-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0 {
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&c7x_0 {
+	mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+	status = "okay";
+};
+
+&c7x_1 {
+	mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
+	memory-region = <&c7x_1_dma_memory_region>,
+			<&c7x_1_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
index 14c6c6a332ef..cdc8570e54b2 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
@@ -56,6 +56,7 @@
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 			clocks = <&k3_clks 135 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -71,6 +72,7 @@
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 			clocks = <&k3_clks 136 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -86,6 +88,7 @@
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 			clocks = <&k3_clks 137 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -101,6 +104,7 @@
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
 			clocks = <&k3_clks 138 0>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi
new file mode 100644
index 000000000000..61db2348d6a4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree Source for J742S2 SoC Family
+ *
+ * TRM: https://www.ti.com/lit/pdf/spruje3
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+&mcu_r5fss0_core0 {
+	firmware-name = "j742s2-mcu-r5f0_0-fw";
+};
+
+&mcu_r5fss0_core1 {
+	firmware-name = "j742s2-mcu-r5f0_1-fw";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j742s2.dtsi b/arch/arm64/boot/dts/ti/k3-j742s2.dtsi
index 7a72f82f56d6..d265df1abade 100644
--- a/arch/arm64/boot/dts/ti/k3-j742s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j742s2.dtsi
@@ -96,3 +96,4 @@
 };
 
 #include "k3-j742s2-main.dtsi"
+#include "k3-j742s2-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso
index 685305092bd8..22533d678f79 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso
@@ -75,5 +75,6 @@
 		dma-coherent;
 		phys = <&serdes0_pcie1_link>;
 		phy-names = "pcie-phy";
+		bootph-all;
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
index dcd2c7c39ec3..c1f9573557d0 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
@@ -102,13 +102,6 @@
 		gpios = <16 GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-
-	/* Toggle MUX2 for MDIO lines */
-	mux-sel-hog {
-		gpio-hog;
-		gpios = <13 GPIO_ACTIVE_HIGH>, <14 GPIO_ACTIVE_HIGH>, <15 GPIO_ACTIVE_HIGH>;
-		output-high;
-	};
 };
 
 &main_pmx0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
index d5f8c8531923..424628c63c2d 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
@@ -24,7 +24,6 @@
 };
 
 &main_cpsw0 {
-	pinctrl-names = "default";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index a84bde08f85e..6c7458c76f53 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -27,31 +27,7 @@
 	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
-
-		c71_3_dma_memory_region: c71-dma-memory@ab000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xab000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_3_memory_region: c71-memory@ab100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xab100000 0x00 0xf00000>;
-			no-map;
-		};
-	};
-};
-
-&mailbox0_cluster5 {
-	mbox_c71_3: mbox-c71-3 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
 	};
 };
 
-&c71_3 {
-	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
-	memory-region = <&c71_3_dma_memory_region>,
-			<&c71_3_memory_region>;
-	status = "okay";
-};
+#include "k3-j784s4-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
index b2e2b9f507a9..e50735577737 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
@@ -5,6 +5,9 @@
  * EVM Board Schematics(j784s4): https://www.ti.com/lit/zip/sprr458
  * EVM Board Schematics(j742s2): https://www.ti.com/lit/zip/SPAC001
  */
+
+#include <dt-bindings/phy/phy-cadence.h>
+
 / {
 	chosen {
 		stdout-path = "serial2:115200n8";
@@ -32,137 +35,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a8100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_1_dma_memory_region: c71-dma-memory@a9000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa9000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_1_memory_region: c71-memory@a9100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa9100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_2_dma_memory_region: c71-dma-memory@aa000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xaa000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_2_memory_region: c71-memory@aa100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xaa100000 0x00 0xf00000>;
-			no-map;
-		};
 	};
 
 	evm_12v0: regulator-evm12v0 {
@@ -298,6 +181,52 @@
 		clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000",
 			      "cpb-codec-scki", "cpb-codec-scki-48000";
 	};
+
+	vsys_io_1v8: regulator-vsys-io-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_io_1v2: regulator-vsys-io-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	edp1_refclk: clock-edp1-refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+		#clock-cells = <0>;
+	};
+
+	dp1_pwr_3v3: regulator-dp1-prw {
+		compatible = "regulator-fixed";
+		regulator-name = "dp1-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp4 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	dp1: connector-dp1 {
+		compatible = "dp-connector";
+		label = "DP1";
+		type = "full-size";
+		dp-pwr-supply = <&dp1_pwr_3v3>;
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&dp1_out>;
+			};
+		};
+	};
 };
 
 &wkup_gpio0 {
@@ -341,8 +270,8 @@
 
 	main_i2c0_pins_default: main-i2c0-default-pins {
 		pinctrl-single,pins = <
-			J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
-			J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
+			J784S4_IOPAD(0x0e0, PIN_INPUT, 0) /* (AN36) I2C0_SCL */
+			J784S4_IOPAD(0x0e4, PIN_INPUT, 0) /* (AP37) I2C0_SDA */
 		>;
 	};
 
@@ -635,6 +564,7 @@
 				regulator-max-microvolt = <1100000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			bucka3: buck3 {
@@ -643,6 +573,7 @@
 				regulator-max-microvolt = <850000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			bucka4: buck4 {
@@ -651,6 +582,7 @@
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			bucka5: buck5 {
@@ -659,6 +591,7 @@
 				regulator-max-microvolt = <850000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa1: ldo1 {
@@ -667,6 +600,7 @@
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa2: ldo2 {
@@ -675,6 +609,7 @@
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa3: ldo3 {
@@ -683,6 +618,7 @@
 				regulator-max-microvolt = <800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 
 			ldoa4: ldo4 {
@@ -691,6 +627,7 @@
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
+				bootph-all;
 			};
 		};
 	};
@@ -983,7 +920,7 @@
 
 &mcu_cpsw_port1 {
 	status = "okay";
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&mcu_phy0>;
 };
 
@@ -1007,226 +944,11 @@
 };
 
 &main_cpsw1_port1 {
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&main_cpsw1_phy0>;
 	status = "okay";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-
-	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_1: mbox-c71-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster5 {
-	status = "okay";
-	interrupts = <416>;
-
-	mbox_c71_2: mbox-c71-2 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss2 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer3 {
-	status = "reserved";
-};
-
-&main_timer4 {
-	status = "reserved";
-};
-
-&main_timer5 {
-	status = "reserved";
-};
-
-&main_timer6 {
-	status = "reserved";
-};
-
-&main_timer7 {
-	status = "reserved";
-};
-
-&main_timer8 {
-	status = "reserved";
-};
-
-&main_timer9 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&main_r5fss2_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
-	memory-region = <&main_r5fss2_core0_dma_memory_region>,
-			<&main_r5fss2_core0_memory_region>;
-};
-
-&main_r5fss2_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
-	memory-region = <&main_r5fss2_core1_dma_memory_region>,
-			<&main_r5fss2_core1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
-
-&c71_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
-	memory-region = <&c71_1_dma_memory_region>,
-			<&c71_1_memory_region>;
-};
-
-&c71_2 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
-	memory-region = <&c71_2_dma_memory_region>,
-			<&c71_2_memory_region>;
-};
-
 &tscadc0 {
 	pinctrl-0 = <&mcu_adc0_pins_default>;
 	pinctrl-names = "default";
@@ -1248,6 +970,7 @@
 &serdes_refclk {
 	status = "okay";
 	clock-frequency = <100000000>;
+	bootph-all;
 };
 
 &dss {
@@ -1262,6 +985,14 @@
 				 <&k3_clks 218 22>;
 };
 
+&pcie1_ctrl {
+	bootph-all;
+};
+
+&serdes_ln_ctrl {
+	bootph-all;
+};
+
 &serdes0 {
 	status = "okay";
 
@@ -1271,6 +1002,7 @@
 		#phy-cells = <0>;
 		cdns,phy-type = <PHY_TYPE_PCIE>;
 		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+		bootph-all;
 	};
 
 	serdes0_usb_link: phy@3 {
@@ -1329,12 +1061,26 @@
 };
 
 &dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	/* DP */
-	port {
+	port@0 {
+		reg = <0>;
+
 		dpi0_out: endpoint {
 			remote-endpoint = <&dp0_in>;
 		};
 	};
+
+	/* DSI */
+	port@2 {
+		reg = <2>;
+
+		dpi2_out: endpoint {
+			remote-endpoint = <&dsi0_in>;
+		};
+	};
 };
 
 &main_i2c4 {
@@ -1349,6 +1095,65 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	bridge_dsi_edp: bridge-dsi-edp@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		clock-names = "refclk";
+		clocks = <&edp1_refclk>;
+		enable-gpios = <&exp4 2 GPIO_ACTIVE_HIGH>;
+		vpll-supply = <&vsys_io_1v8>;
+		vccio-supply = <&vsys_io_1v8>;
+		vcca-supply = <&vsys_io_1v2>;
+		vcc-supply = <&vsys_io_1v2>;
+
+		dsi_edp_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp1_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				dp1_out: endpoint {
+					remote-endpoint = <&dp1_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&dsi0_ports {
+	port@0 {
+		reg = <0>;
+
+		dsi0_out: endpoint {
+			remote-endpoint = <&dp1_in>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dsi0_in: endpoint {
+			remote-endpoint = <&dpi2_out>;
+		};
+	};
+};
+
+&dphy_tx0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
 };
 
 &dp0_ports {
@@ -1399,10 +1204,13 @@
 
 &pcie1_rc {
 	status = "okay";
+	clocks = <&k3_clks 333 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>;
+	clock-names = "fck", "pcie_refclk";
 	num-lanes = <2>;
 	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
 	phys = <&serdes0_pcie1_link>;
 	phy-names = "pcie-phy";
+	ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x1>;
 };
 
 &serdes1 {
@@ -1479,3 +1287,5 @@
 		0 0 0 0
 	>;
 };
+
+#include "k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso
new file mode 100644
index 000000000000..ba15d72d86d6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling USB0 instance of USB on J784S4 and J742S2 EVMs for
+ * Host Mode of operation with the Type-A Connector.
+ *
+ * J784S4 EVM Product Link: https://www.ti.com/tool/J784S4XEVM
+ * J742S2 EVM Product Link: https://www.ti.com/tool/J742S2XH01EVM
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&exp2 {
+	p12-hog {
+		/* P12 - USB2.0_MUX_SEL */
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "USB2.0_MUX_SEL";
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
index 7721852c1f68..9cc0901d58fb 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
@@ -77,14 +77,16 @@
 
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
-			reg = <0x00004080 0x30>;
+			reg = <0x00004080 0x50>;
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
 					<0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */
 					<0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */
 					<0x18 0x3>, <0x1c 0x3>, /* SERDES1 lane2/3 select */
 					<0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */
-					<0x28 0x3>, <0x2c 0x3>; /* SERDES2 lane2/3 select */
+					<0x28 0x3>, <0x2c 0x3>, /* SERDES2 lane2/3 select */
+					<0x40 0x3>, <0x44 0x3>, /* SERDES4 lane0/1 select */
+					<0x48 0x3>, <0x4c 0x3>; /* SERDES4 lane2/3 select */
 			idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>,
 				      <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
 				      <J784S4_SERDES0_LANE2_IP3_UNUSED>,
@@ -124,6 +126,16 @@
 			assigned-clock-parents = <&k3_clks 157 63>;
 			#clock-cells = <0>;
 		};
+
+		acspcie0_proxy_ctrl: clock-controller@1a090 {
+			compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon";
+			reg = <0x1a090 0x4>;
+		};
+
+		acspcie1_proxy_ctrl: clock-controller@1a094 {
+			compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon";
+			reg = <0x1a094 0x4>;
+		};
 	};
 
 	main_ehrpwm0: pwm@3000000 {
@@ -193,7 +205,7 @@
 		ranges;
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */
+		reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
 		      <0x00 0x01900000 0x00 0x100000>, /* GICR */
 		      <0x00 0x6f000000 0x00 0x2000>,   /* GICC */
 		      <0x00 0x6f010000 0x00 0x1000>,   /* GICH */
@@ -224,7 +236,7 @@
 	};
 
 	main_pmx0: pinctrl@11c000 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x11c000 0x00 0x120>;
 		#pinctrl-cells = <1>;
@@ -234,7 +246,7 @@
 
 	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
 	main_timerio_input: pinctrl@104200 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x00 0x104200 0x00 0x50>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -243,7 +255,7 @@
 
 	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
 	main_timerio_output: pinctrl@104280 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x00 0x104280 0x00 0x20>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -807,6 +819,9 @@
 		cdns_csi2rx0: csi-bridge@4504000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04504000 0x00 0x00001000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 72 2>, <&k3_clks 72 0>, <&k3_clks 72 2>,
 				<&k3_clks 72 2>, <&k3_clks 72 3>, <&k3_clks 72 3>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -860,6 +875,9 @@
 		cdns_csi2rx1: csi-bridge@4514000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04514000 0x00 0x00001000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 73 2>, <&k3_clks 73 0>, <&k3_clks 73 2>,
 				<&k3_clks 73 2>, <&k3_clks 73 3>, <&k3_clks 73 3>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -912,6 +930,9 @@
 		cdns_csi2rx2: csi-bridge@4524000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04524000 0x00 0x00001000>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 74 2>, <&k3_clks 74 0>, <&k3_clks 74 2>,
 				<&k3_clks 74 2>, <&k3_clks 74 3>, <&k3_clks 74 3>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1053,7 +1074,7 @@
 		reg = <0x00 0x02900000 0x00 0x1000>,
 		      <0x00 0x02907000 0x00 0x400>,
 		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x10000000 0x00 0x00001000>;
+		      <0x40 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
@@ -1071,8 +1092,8 @@
 		device-id = <0xb012>;
 		msi-map = <0x0 &gic_its 0x0 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
-			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x40 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x40 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		status = "disabled";
 	};
@@ -1082,7 +1103,7 @@
 		reg = <0x00 0x02910000 0x00 0x1000>,
 		      <0x00 0x02917000 0x00 0x400>,
 		      <0x00 0x0d800000 0x00 0x00800000>,
-		      <0x00 0x18000000 0x00 0x00001000>;
+		      <0x41 0x00000000 0x00 0x00001000>; /* ECAM (4 KB) */
 		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
 		interrupt-names = "link_state";
 		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
@@ -1100,8 +1121,8 @@
 		device-id = <0xb012>;
 		msi-map = <0x0 &gic_its 0x10000 0x10000>;
 		dma-coherent;
-		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
-			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		ranges = <0x01000000 0x00 0x00001000 0x41 0x00001000 0x00 0x00100000>, /* IO (1 MB) */
+			 <0x02000000 0x00 0x00101000 0x41 0x00101000 0x00 0xffeff000>; /* 32-bit Non-Prefetchable MEM (4 GB - 1 MB - 4 KB) */
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
 		status = "disabled";
 	};
@@ -2040,7 +2061,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 376 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 376 1>;
+		clocks = <&k3_clks 376 0>;
 		status = "disabled";
 	};
 
@@ -2051,7 +2072,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 377 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 377 1>;
+		clocks = <&k3_clks 377 0>;
 		status = "disabled";
 	};
 
@@ -2062,7 +2083,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 378 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 378 1>;
+		clocks = <&k3_clks 378 0>;
 		status = "disabled";
 	};
 
@@ -2073,7 +2094,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 379 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 379 1>;
+		clocks = <&k3_clks 379 0>;
 		status = "disabled";
 	};
 
@@ -2084,7 +2105,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 380 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 380 1>;
+		clocks = <&k3_clks 380 0>;
 		status = "disabled";
 	};
 
@@ -2095,7 +2116,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 381 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 381 1>;
+		clocks = <&k3_clks 381 0>;
 		status = "disabled";
 	};
 
@@ -2106,7 +2127,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 382 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 382 1>;
+		clocks = <&k3_clks 382 0>;
 		status = "disabled";
 	};
 
@@ -2117,7 +2138,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 383 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 383 1>;
+		clocks = <&k3_clks 383 0>;
 		status = "disabled";
 	};
 
@@ -2153,6 +2174,7 @@
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
 			 <0x5d00000 0x00 0x5d00000 0x20000>;
 		power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss0_core0: r5f@5c00000 {
 			compatible = "ti,j721s2-r5f";
@@ -2167,6 +2189,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss0_core1: r5f@5d00000 {
@@ -2182,6 +2205,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -2193,6 +2217,7 @@
 		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
 			 <0x5f00000 0x00 0x5f00000 0x20000>;
 		power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss1_core0: r5f@5e00000 {
 			compatible = "ti,j721s2-r5f";
@@ -2207,6 +2232,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss1_core1: r5f@5f00000 {
@@ -2222,6 +2248,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -2233,6 +2260,7 @@
 		ranges = <0x5900000 0x00 0x5900000 0x20000>,
 			 <0x5a00000 0x00 0x5a00000 0x20000>;
 		power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss2_core0: r5f@5900000 {
 			compatible = "ti,j721s2-r5f";
@@ -2247,6 +2275,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss2_core1: r5f@5a00000 {
@@ -2262,6 +2291,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -2510,6 +2540,45 @@
 		status = "reserved";
 	};
 
+	dphy_tx0: phy@4480000 {
+		compatible = "ti,j721e-dphy";
+		reg = <0x00 0x04480000 0x00 0x00001000>;
+		clocks = <&k3_clks 402 20>, <&k3_clks 402 3>;
+		clock-names = "psm", "pll_ref";
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 402 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 402 3>;
+		assigned-clock-parents = <&k3_clks 402 4>;
+		assigned-clock-rates = <19200000>;
+		status = "disabled";
+	};
+
+	dsi0: dsi@4800000 {
+		compatible = "ti,j721e-dsi";
+		reg = <0x00 0x04800000 0x00 0x00100000>,
+		      <0x00 0x04710000 0x00 0x00000100>;
+		clocks = <&k3_clks 215 2>, <&k3_clks 215 5>;
+		clock-names = "dsi_p_clk", "dsi_sys_clk";
+		power-domains = <&k3_pds 215 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&dphy_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+
+		dsi0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	mhdp: bridge@a000000 {
 		compatible = "ti,j721e-mhdp8546";
 		reg = <0x0 0xa000000 0x0 0x30a00>,
@@ -2668,4 +2737,15 @@
 		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	bist_main14: bist@33c0000 {
+		compatible = "ti,j784s4-bist";
+		reg = <0x00 0x033c0000 0x00 0x400>,
+		      <0x00 0x0010c1a0 0x00 0x01c>;
+		reg-names = "cfg", "ctrl_mmr";
+		clocks = <&k3_clks 237 7>;
+		power-domains = <&k3_pds 237 TI_SCI_PD_EXCLUSIVE>;
+		bootph-pre-ram;
+		ti,sci-dev-id = <234>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
index 9638130caece..cc22bfb5f599 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
@@ -76,7 +76,7 @@
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c000 0x00 0x034>;
 		#pinctrl-cells = <1>;
@@ -85,7 +85,7 @@
 	};
 
 	wkup_pmx1: pinctrl@4301c038 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c038 0x00 0x02c>;
 		#pinctrl-cells = <1>;
@@ -94,7 +94,7 @@
 	};
 
 	wkup_pmx2: pinctrl@4301c068 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c068 0x00 0x120>;
 		#pinctrl-cells = <1>;
@@ -103,7 +103,7 @@
 	};
 
 	wkup_pmx3: pinctrl@4301c190 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c190 0x00 0x004>;
 		#pinctrl-cells = <1>;
@@ -125,7 +125,7 @@
 
 	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
 	mcu_timerio_input: pinctrl@40f04200 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x00 0x40f04200 0x00 0x28>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -136,7 +136,7 @@
 
 	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
 	mcu_timerio_output: pinctrl@40f04280 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x00 0x40f04280 0x00 0x28>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -595,6 +595,7 @@
 		ranges = <0x41000000 0x00 0x41000000 0x20000>,
 			 <0x41400000 0x00 0x41400000 0x20000>;
 		power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		mcu_r5fss0_core0: r5f@41000000 {
 			compatible = "ti,j721s2-r5f";
@@ -609,6 +610,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		mcu_r5fss0_core1: r5f@41400000 {
@@ -624,6 +626,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi
new file mode 100644
index 000000000000..455397227d4a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J784S4/J742S2 SoCs
+ *
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_dma_memory_region: memory@a4000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_memory_region: memory@a4100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_dma_memory_region: memory@a5000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_memory_region: memory@a5100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss2_core0_dma_memory_region: memory@a6000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss2_core0_memory_region: memory@a6100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss2_core1_dma_memory_region: memory@a7000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss2_core1_memory_region: memory@a7100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_0_dma_memory_region: memory@a8000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa8000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_0_memory_region: memory@a8100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa8100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_1_dma_memory_region: memory@a9000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa9000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_1_memory_region: memory@a9100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa9100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_2_dma_memory_region: memory@aa000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xaa000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_2_memory_region: memory@aa100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xaa100000 0x00 0xf00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster5 {
+	status = "okay";
+	interrupts = <416>;
+
+	mbox_c71_2: mbox-c71-2 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&main_timer3 {
+	status = "reserved";
+};
+
+&main_timer4 {
+	status = "reserved";
+};
+
+&main_timer5 {
+	status = "reserved";
+};
+
+&main_timer6 {
+	status = "reserved";
+};
+
+&main_timer7 {
+	status = "reserved";
+};
+
+&main_timer8 {
+	status = "reserved";
+};
+
+&main_timer9 {
+	status = "reserved";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss1_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&main_r5fss2 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss2_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
+	memory-region = <&main_r5fss2_core0_dma_memory_region>,
+			<&main_r5fss2_core0_memory_region>;
+};
+
+&main_r5fss2_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
+	memory-region = <&main_r5fss2_core1_dma_memory_region>,
+			<&main_r5fss2_core1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
+
+&c71_2 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
+	memory-region = <&c71_2_dma_memory_region>,
+			<&c71_2_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..81b508b9b05e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-ti-ipc-firmware.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J784S4 SoCs
+ *
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	c71_3_dma_memory_region: memory@ab000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xab000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_3_memory_region: memory@ab100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xab100000 0x00 0xf00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster5 {
+
+	mbox_c71_3: mbox-c71-3 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&c71_3 {
+	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
+	memory-region = <&c71_3_dma_memory_region>,
+			<&c71_3_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index 22b8d73cfd32..dc8e03ae74c8 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -3,15 +3,32 @@
  * This header provides constants for pinctrl bindings for TI's K3 SoC
  * family.
  *
- * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2025 Texas Instruments Incorporated - https://www.ti.com/
  */
 #ifndef DTS_ARM64_TI_K3_PINCTRL_H
 #define DTS_ARM64_TI_K3_PINCTRL_H
 
+#define WKUP_LVL_EN_SHIFT       (7)
+#define WKUP_LVL_POL_SHIFT      (8)
+#define ST_EN_SHIFT		(14)
 #define PULLUDEN_SHIFT		(16)
 #define PULLTYPESEL_SHIFT	(17)
 #define RXACTIVE_SHIFT		(18)
+#define DRV_STR_SHIFT           (19)
+#define ISO_OVERRIDE_EN_SHIFT   (22)
+#define ISO_BYPASS_EN_SHIFT     (23)
 #define DEBOUNCE_SHIFT		(11)
+#define FORCE_DS_EN_SHIFT	(15)
+#define DS_EN_SHIFT		(24)
+#define DS_OUT_DIS_SHIFT	(25)
+#define DS_OUT_VAL_SHIFT	(26)
+#define DS_PULLUD_EN_SHIFT	(27)
+#define DS_PULLTYPE_SEL_SHIFT	(28)
+#define WKUP_EN_SHIFT           (29)
+
+/* Schmitt trigger configuration */
+#define ST_DISABLE		(0 << ST_EN_SHIFT)
+#define ST_ENABLE		(1 << ST_EN_SHIFT)
 
 #define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
 #define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
@@ -22,13 +39,40 @@
 #define INPUT_EN		(1 << RXACTIVE_SHIFT)
 #define INPUT_DISABLE		(0 << RXACTIVE_SHIFT)
 
+#define DS_PULL_DISABLE         (1 << DS_PULLUD_EN_SHIFT)
+#define DS_PULL_ENABLE          (0 << DS_PULLUD_EN_SHIFT)
+
+#define DS_PULL_UP              (1 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
+#define DS_PULL_DOWN            (0 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
+
+#define DS_STATE_EN             (1 << DS_EN_SHIFT)
+#define DS_STATE_DISABLE        (0 << DS_EN_SHIFT)
+
+#define DS_INPUT_EN             (1 << DS_OUT_DIS_SHIFT | DS_STATE_EN)
+#define DS_INPUT_DISABLE        (0 << DS_OUT_DIS_SHIFT | DS_STATE_EN)
+
+#define DS_OUT_VALUE_ZERO       (0 << DS_OUT_VAL_SHIFT)
+#define DS_OUT_VALUE_ONE        (1 << DS_OUT_VAL_SHIFT)
+
+/* Configuration to enable wake-up on pin activity */
+#define WKUP_ENABLE             (1 << WKUP_EN_SHIFT)
+#define WKUP_DISABLE            (0 << WKUP_EN_SHIFT)
+#define WKUP_ON_LEVEL           (1 << WKUP_LVL_EN_SHIFT)
+#define WKUP_ON_EDGE            (0 << WKUP_LVL_EN_SHIFT)
+#define WKUP_LEVEL_LOW          (0 << WKUP_LVL_POL_SHIFT)
+#define WKUP_LEVEL_HIGH         (1 << WKUP_LVL_POL_SHIFT)
+
 /* Only these macros are expected be used directly in device tree files */
 #define PIN_OUTPUT		(INPUT_DISABLE | PULL_DISABLE)
 #define PIN_OUTPUT_PULLUP	(INPUT_DISABLE | PULL_UP)
 #define PIN_OUTPUT_PULLDOWN	(INPUT_DISABLE | PULL_DOWN)
-#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
-#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
-#define PIN_INPUT_PULLDOWN	(INPUT_EN | PULL_DOWN)
+#define PIN_INPUT		(INPUT_EN | ST_ENABLE | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | ST_ENABLE | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN | ST_ENABLE | PULL_DOWN)
+/* Input configurations with Schmitt Trigger disabled */
+#define PIN_INPUT_NOST		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP_NOST	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN_NOST	(INPUT_EN | PULL_DOWN)
 
 #define PIN_DEBOUNCE_DISABLE	(0 << DEBOUNCE_SHIFT)
 #define PIN_DEBOUNCE_CONF1	(1 << DEBOUNCE_SHIFT)
@@ -38,15 +82,49 @@
 #define PIN_DEBOUNCE_CONF5	(5 << DEBOUNCE_SHIFT)
 #define PIN_DEBOUNCE_CONF6	(6 << DEBOUNCE_SHIFT)
 
+#define PIN_DRIVE_STRENGTH_NOMINAL      (0 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_SLOW         (1 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_FAST         (2 << DRV_STR_SHIFT)
+
+#define PIN_DS_FORCE_DISABLE		(0 << FORCE_DS_EN_SHIFT)
+#define PIN_DS_FORCE_ENABLE		(1 << FORCE_DS_EN_SHIFT)
+#define PIN_DS_ISO_OVERRIDE_DISABLE     (0 << ISO_OVERRIDE_EN_SHIFT)
+#define PIN_DS_ISO_OVERRIDE_ENABLE      (1 << ISO_OVERRIDE_EN_SHIFT)
+#define PIN_DS_OUT_ENABLE		(0 << DS_OUT_DIS_SHIFT)
+#define PIN_DS_OUT_DISABLE		(1 << DS_OUT_DIS_SHIFT)
+#define PIN_DS_OUT_VALUE_ZERO		(0 << DS_OUT_VAL_SHIFT)
+#define PIN_DS_OUT_VALUE_ONE		(1 << DS_OUT_VAL_SHIFT)
+#define PIN_DS_PULLUD_ENABLE		(0 << DS_PULLUD_EN_SHIFT)
+#define PIN_DS_PULLUD_DISABLE		(1 << DS_PULLUD_EN_SHIFT)
+#define PIN_DS_PULL_DOWN		(0 << DS_PULLTYPE_SEL_SHIFT)
+#define PIN_DS_PULL_UP			(1 << DS_PULLTYPE_SEL_SHIFT)
+#define PIN_DS_ISO_BYPASS               (1 << ISO_BYPASS_EN_SHIFT)
+#define PIN_DS_ISO_BYPASS_DISABLE       (0 << ISO_BYPASS_EN_SHIFT)
+
+#define PIN_DS_OUTPUT_LOW               (DS_INPUT_DISABLE | DS_OUT_VALUE_ZERO)
+#define PIN_DS_OUTPUT_HIGH              (DS_INPUT_DISABLE | DS_OUT_VALUE_ONE)
+#define PIN_DS_INPUT                    (DS_INPUT_EN | DS_PULL_DISABLE)
+#define PIN_DS_INPUT_PULLUP             (DS_INPUT_EN | DS_PULL_UP)
+#define PIN_DS_INPUT_PULLDOWN           (DS_INPUT_EN | DS_PULL_DOWN)
+
+#define PIN_WKUP_EN_LEVEL_LOW           (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_LOW)
+#define PIN_WKUP_EN_LEVEL_HIGH          (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_HIGH)
+#define PIN_WKUP_EN                     (WKUP_ENABLE | WKUP_ON_EDGE)
+
 /* Default mux configuration for gpio-ranges to use with pinctrl */
 #define PIN_GPIO_RANGE_IOPAD	(PIN_INPUT | 7)
 
 #define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
+#define AM62DX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62DX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
 #define AM62PX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM62PX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
+#define AM62LX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+
 #define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
index 39806f0ae513..9aa7b1872bd6 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
@@ -152,6 +152,7 @@
 		gic: interrupt-controller@24001000 {
 			compatible = "arm,gic-400";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 			reg = <0 0x24001000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index 1068b0fa8e98..70fac0b276df 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -29,3 +29,29 @@ zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb
 zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
+
+zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kr-g-revA.dtb
+zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kr-g-revB.dtb
+zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kr-g-revA.dtb
+zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kr-g-revB.dtb
+
+zynqmp-sm-k24-revA-sck-kd-g-revA-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kd-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kd-g-revA.dtb
+zynqmp-smk-k24-revA-sck-kd-g-revA-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kd-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kd-g-revA.dtb
+
+zynqmp-sm-k24-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kv-g-revB.dtb
+zynqmp-smk-k24-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kv-g-revB.dtb
+
+zynqmp-sm-k24-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kr-g-revB.dtb
+zynqmp-smk-k24-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kr-g-revB.dtb
+
+dtb-$(CONFIG_ARCH_ZYNQMP) += versal-net-vn-x-b2197-01-revA.dtb
diff --git a/arch/arm64/boot/dts/xilinx/versal-net-clk.dtsi b/arch/arm64/boot/dts/xilinx/versal-net-clk.dtsi
new file mode 100644
index 000000000000..b7a8a1a512cb
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/versal-net-clk.dtsi
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal NET fixed clock
+ *
+ * (C) Copyright 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2025, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/ {
+	clk60: clk60 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <60000000>;
+	};
+
+	clk100: clk100 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	clk125: clk125 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clk150: clk150 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <150000000>;
+	};
+
+	clk160: clk160 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <160000000>;
+	};
+
+	clk200: clk200 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
+	clk250: clk250 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+	};
+
+	clk300: clk300 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <300000000>;
+	};
+
+	clk450: clk450 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <450000000>;
+	};
+
+	clk1200: clk1200 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1200000000>;
+	};
+
+	firmware {
+		versal_net_firmware: versal-net-firmware {
+			compatible = "xlnx,versal-net-firmware", "xlnx,versal-firmware";
+			bootph-all;
+			method = "smc";
+		};
+	};
+};
+
+&adma0 {
+	clocks = <&clk450>, <&clk450>;
+};
+
+&adma1 {
+	clocks = <&clk450>, <&clk450>;
+};
+
+&adma2 {
+	clocks = <&clk450>, <&clk450>;
+};
+
+&adma3 {
+	clocks = <&clk450>, <&clk450>;
+};
+
+&adma4 {
+	clocks = <&clk450>, <&clk450>;
+};
+
+&adma5 {
+	clocks = <&clk450>, <&clk450>;
+};
+
+&adma6 {
+	clocks = <&clk450>, <&clk450>;
+};
+
+&adma7 {
+	clocks = <&clk450>, <&clk450>;
+};
+
+&can0 {
+	clocks = <&clk160>, <&clk160>;
+};
+
+&can1 {
+	clocks = <&clk160>, <&clk160>;
+};
+
+&gem0 {
+	clocks = <&clk125>, <&clk125>, <&clk125>, <&clk125>, <&clk250>;
+};
+
+&gem1 {
+	clocks = <&clk125>, <&clk125>, <&clk125>, <&clk125>, <&clk250>;
+};
+
+&gpio0 {
+	clocks = <&clk100>;
+};
+
+&gpio1 {
+	clocks = <&clk100>;
+};
+
+&i2c0 {
+	clocks = <&clk100>;
+};
+
+&i2c1 {
+	clocks = <&clk100>;
+};
+
+&i3c0 {
+	clocks = <&clk100>;
+};
+
+&i3c1 {
+	clocks = <&clk100>;
+};
+
+&ospi {
+	clocks = <&clk200>;
+};
+
+&qspi {
+	clocks = <&clk300>, <&clk300>;
+};
+
+&rtc {
+	/* Nothing */
+};
+
+&sdhci0 {
+	clocks = <&clk200>, <&clk200>, <&clk1200>;
+};
+
+&sdhci1 {
+	clocks = <&clk200>, <&clk200>, <&clk1200>;
+};
+
+&serial0 {
+	clocks = <&clk100>, <&clk100>;
+};
+
+&serial1 {
+	clocks = <&clk100>, <&clk100>;
+};
+
+&spi0 {
+	clocks = <&clk200>, <&clk200>;
+};
+
+&spi1 {
+	clocks = <&clk200>, <&clk200>;
+};
+
+&ttc0 {
+	clocks = <&clk150>;
+};
+
+&usb0 {
+	clocks = <&clk60>, <&clk60>;
+};
+
+&dwc3_0 {
+	clocks = <&clk60>;
+};
+
+&usb1 {
+	clocks = <&clk60>, <&clk60>;
+};
+
+&dwc3_1 {
+	clocks = <&clk60>;
+};
+
+&wwdt0 {
+	clocks = <&clk150>;
+};
+
+&wwdt1 {
+	clocks = <&clk150>;
+};
+
+&wwdt2 {
+	clocks = <&clk150>;
+};
+
+&wwdt3 {
+	clocks = <&clk150>;
+};
+
+&lpd_wwdt0 {
+	clocks = <&clk150>;
+};
+
+&lpd_wwdt1 {
+	clocks = <&clk150>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/versal-net-vn-x-b2197-01-revA.dts b/arch/arm64/boot/dts/xilinx/versal-net-vn-x-b2197-01-revA.dts
new file mode 100644
index 000000000000..06b2301f48a0
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/versal-net-vn-x-b2197-01-revA.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal Net VNX board revA
+ *
+ * (C) Copyright 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2025, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "versal-net.dtsi"
+#include "versal-net-clk.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "xlnx,versal-net-vnx-revA", "xlnx,versal-net-vnx", "xlnx,versal-net";
+	model = "Xilinx Versal NET VNX revA";
+	dma-coherent;
+
+	memory: memory@0 {
+		reg = <0 0 0 0x80000000>;
+		device_type = "memory";
+	};
+
+	memory_hi: memory@800000000 {
+		reg = <8 0 3 0x80000000>;
+		device_type = "memory";
+	};
+
+	memory_hi2: memory@50000000000 {
+		reg = <0x500 0 4 0>;
+		device_type = "memory";
+	};
+
+	chosen {
+		bootargs = "console=ttyAMA1,115200n8";
+		stdout-path = "serial1:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		rsc_tbl_carveout: rproc@bbf14000 {
+			reg = <0 0xbbf14000 0 0x1000>;
+			no-map;
+		};
+		rpu0vdev0vring0: rpu0vdev0vring0@bbf15000 {
+			reg = <0 0xbbf15000 0 0x1000>;
+			no-map;
+		};
+		rpu0vdev0vring1: rpu0vdev0vring1@bbf16000 {
+			reg = <0 0xbbf16000 0 0x1000>;
+			no-map;
+		};
+		rpu0vdev0buffer: rpu0vdev0buffer@bbf17000 {
+			reg = <0 0xbbf17000 0 0xD000>;
+			no-map;
+		};
+		reserve_others: reserveothers@0 {
+			reg = <0 0x0 0 0x1c200000>;
+			no-map;
+		};
+		pdi_update: pdiupdate@1c200000 {
+			reg = <0 0x1c200000 0 0x6000000>;
+			no-map;
+		};
+		reserve_optee_atf: reserveopteeatf@22200000 {
+			reg = <0 0x22200000 0 0x4100000>;
+			no-map;
+		};
+	};
+};
+
+&gem1 {
+	status = "okay";
+	iommus = <&smmu 0x235>;
+	phy-handle = <&phy>;
+	phy-mode = "rmii";
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy: ethernet-phy@4 {
+			reg = <4>;
+		};
+	};
+};
+
+&ospi {
+	num-cs = <2>;
+	iommus = <&smmu 0x245>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&sdhci1 {
+	status = "okay";
+	iommus = <&smmu 0x243>;
+	non-removable;
+	disable-wp;
+	no-sd;
+	no-sdio;
+	cap-mmc-hw-reset;
+	bus-width = <8>;
+	no-1-8-v;
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&smmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/xilinx/versal-net.dtsi b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
new file mode 100644
index 000000000000..412af9a394aa
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
@@ -0,0 +1,1160 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx Versal NET
+ *
+ * (C) Copyright 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2025, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "xlnx,versal-net";
+	model = "Xilinx Versal NET";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	options {
+		u-boot {
+			compatible = "u-boot,config";
+			bootscr-address = /bits/ 64 <0x20000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu100>;
+				};
+				core2 {
+					cpu = <&cpu200>;
+				};
+				core3 {
+					cpu = <&cpu300>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu10000>;
+				};
+
+				core1 {
+					cpu = <&cpu10100>;
+				};
+
+				core2 {
+					cpu = <&cpu10200>;
+				};
+
+				core3 {
+					cpu = <&cpu10300>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&cpu20000>;
+				};
+
+				core1 {
+					cpu = <&cpu20100>;
+				};
+
+				core2 {
+					cpu = <&cpu20200>;
+				};
+
+				core3 {
+					cpu = <&cpu20300>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&cpu30000>;
+				};
+
+				core1 {
+					cpu = <&cpu30100>;
+				};
+
+				core2 {
+					cpu = <&cpu30200>;
+				};
+
+				core3 {
+					cpu = <&cpu30300>;
+				};
+			};
+
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_00>;
+			l2_00: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+		cpu100: cpu@100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x100>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_01>;
+			l2_01: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+		cpu200: cpu@200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x200>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_02>;
+			l2_02: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+		cpu300: cpu@300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x300>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_03>;
+			l2_03: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+		cpu10000: cpu@10000 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x10000>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_10>;
+			l2_10: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+		cpu10100: cpu@10100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x10100>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_11>;
+			l2_11: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+		cpu10200: cpu@10200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x10200>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_12>;
+			l2_12: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+		cpu10300: cpu@10300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x10300>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_13>;
+			l2_13: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
+		};
+		cpu20000: cpu@20000 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x20000>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_20>;
+			l2_20: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_2>;
+			};
+		};
+		cpu20100: cpu@20100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x20100>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_21>;
+			l2_21: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_2>;
+			};
+		};
+		cpu20200: cpu@20200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x20200>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_22>;
+			l2_22: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_2>;
+			};
+		};
+		cpu20300: cpu@20300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x20300>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_23>;
+			l2_23: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_2>;
+			};
+		};
+		cpu30000: cpu@30000 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x30000>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_30>;
+			l2_30: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_3>;
+			};
+		};
+		cpu30100: cpu@30100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x30100>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_31>;
+			l2_31: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_3>;
+			};
+		};
+		cpu30200: cpu@30200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x30200>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_32>;
+			l2_32: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_3>;
+			};
+		};
+		cpu30300: cpu@30300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x30300>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_33>;
+			l2_33: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_3>;
+			};
+		};
+
+		l3_0: l3-0-cache { /* cluster private */
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x200000>; /* 2MB */
+			cache-line-size = <64>;
+			/* 16 ways set associativity */
+			/* cache_size / (line_size/associativity) */
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&llc>;
+		};
+
+		l3_1: l3-1-cache { /* cluster private */
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x200000>; /* 2MB */
+			cache-line-size = <64>;
+			/* 16 ways set associativity */
+			/* cache_size / (line_size/associativity) */
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&llc>;
+		};
+
+		l3_2: l3-2-cache { /* cluster private */
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x200000>; /* 2MB */
+			cache-line-size = <64>;
+			/* 16 ways set associativity */
+			/* cache_size / (line_size/associativity) */
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&llc>;
+		};
+
+		l3_3: l3-3-cache { /* cluster private */
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x200000>; /* 2MB */
+			cache-line-size = <64>;
+			/* 16 ways set associativity */
+			/* cache_size / (line_size/associativity) */
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&llc>;
+		};
+
+		llc: l4-cache { /* LLC inside CMN */
+			compatible = "cache";
+			cache-level = <4>;
+			cache-size = <0x1000000>; /* 16MB */
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <600>;
+				min-residency-us = <10000>;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-1066000000 {
+			opp-hz = /bits/ 64 <1066000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1866000000 {
+			opp-hz = /bits/ 64 <1866000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1900000000 {
+			opp-hz = /bits/ 64 <1900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1999000000 {
+			opp-hz = /bits/ 64 <1999000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-2050000000 {
+			opp-hz = /bits/ 64 <2050000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-2100000000 {
+			opp-hz = /bits/ 64 <2100000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-2200000000 {
+			opp-hz = /bits/ 64 <2200000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &dcc;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		rtc = &rtc;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		spi0 = &ospi;
+		spi1 = &qspi;
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		bootph-all;
+	};
+
+	firmware {
+		psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	fpga: fpga-region {
+		compatible = "fpga-region";
+		fpga-mgr = <&versal_fpga>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>, <1 14 4>, <1 11 4>, <1 10 4>;
+	};
+
+	versal_fpga: versal-fpga {
+		compatible = "xlnx,versal-fpga";
+	};
+
+	amba: axi {
+		compatible = "simple-bus";
+		bootph-all;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		adma0: dma-controller@ebd00000 {
+			compatible = "xlnx,zynqmp-dma-1.0";
+			status = "disabled";
+			reg = <0 0xebd00000 0 0x1000>;
+			interrupts = <0 72 4>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+		};
+
+		adma1: dma-controller@ebd10000 {
+			compatible = "xlnx,zynqmp-dma-1.0";
+			status = "disabled";
+			reg = <0 0xebd10000 0 0x1000>;
+			interrupts = <0 73 4>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+		};
+
+		adma2: dma-controller@ebd20000 {
+			compatible = "xlnx,zynqmp-dma-1.0";
+			status = "disabled";
+			reg = <0 0xebd20000 0 0x1000>;
+			interrupts = <0 74 4>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+		};
+
+		adma3: dma-controller@ebd30000 {
+			compatible = "xlnx,zynqmp-dma-1.0";
+			status = "disabled";
+			reg = <0 0xebd30000 0 0x1000>;
+			interrupts = <0 75 4>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+		};
+
+		adma4: dma-controller@ebd40000 {
+			compatible = "xlnx,zynqmp-dma-1.0";
+			status = "disabled";
+			reg = <0 0xebd40000 0 0x1000>;
+			interrupts = <0 76 4>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+		};
+
+		adma5: dma-controller@ebd50000 {
+			compatible = "xlnx,zynqmp-dma-1.0";
+			status = "disabled";
+			reg = <0 0xebd50000 0 0x1000>;
+			interrupts = <0 77 4>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+		};
+
+		adma6: dma-controller@ebd60000 {
+			compatible = "xlnx,zynqmp-dma-1.0";
+			status = "disabled";
+			reg = <0 0xebd60000 0 0x1000>;
+			interrupts = <0 78 4>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+		};
+
+		adma7: dma-controller@ebd70000 {
+			compatible = "xlnx,zynqmp-dma-1.0";
+			status = "disabled";
+			reg = <0 0xebd70000 0 0x1000>;
+			interrupts = <0 79 4>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+		};
+
+		can0: can@f1980000 {
+			compatible = "xlnx,canfd-2.0";
+			status = "disabled";
+			reg = <0 0xf1980000 0 0x6000>;
+			interrupts = <0 27 4>;
+			clock-names = "can_clk", "s_axi_aclk";
+			rx-fifo-depth = <64>;
+			tx-mailbox-count = <32>;
+		};
+
+		can1: can@f1990000 {
+			compatible = "xlnx,canfd-2.0";
+			status = "disabled";
+			reg = <0 0xf1990000 0 0x6000>;
+			interrupts = <0 28 4>;
+			clock-names = "can_clk", "s_axi_aclk";
+			rx-fifo-depth = <64>;
+			tx-mailbox-count = <32>;
+		};
+
+		gem0: ethernet@f19e0000 {
+			compatible = "xlnx,versal-gem", "cdns,gem";
+			status = "disabled";
+			reg = <0 0xf19e0000 0 0x1000>;
+			interrupts = <0 39 4>, <0 39 4>;
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk",
+				      "tsu_clk";
+		};
+
+		gem1: ethernet@f19f0000 {
+			compatible = "xlnx,versal-gem", "cdns,gem";
+			status = "disabled";
+			reg = <0 0xf19f0000 0 0x1000>;
+			interrupts = <0 41 4>, <0 41 4>;
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk",
+				      "tsu_clk";
+		};
+
+		gic: interrupt-controller@e2000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			reg = <0 0xe2000000 0 0x10000>,
+			      <0 0xe2060000 0 0x200000>;
+			interrupt-controller;
+			interrupts = <1 9 4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			its: msi-controller@e2040000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0 0xe2040000 0 0x20000>;
+			};
+		};
+
+		gpio0: gpio@f19d0000 {
+			compatible = "xlnx,versal-gpio-1.0";
+			status = "disabled";
+			reg = <0 0xf19d0000 0 0x1000>;
+			interrupts = <0 20 4>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio1: gpio@f1020000 {
+			compatible = "xlnx,pmc-gpio-1.0";
+			status = "disabled";
+			reg = <0 0xf1020000 0 0x1000>;
+			interrupts = <0 180 4>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		i2c0: i2c@f1940000 {
+			compatible = "cdns,i2c-r1p14";
+			status = "disabled";
+			reg = <0 0xf1940000 0 0x1000>;
+			interrupts = <0 21 4>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@f1950000 {
+			compatible = "cdns,i2c-r1p14";
+			status = "disabled";
+			reg = <0 0xf1950000 0 0x1000>;
+			interrupts = <0 22 4>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i3c0: i3c@f1948000 {
+			compatible = "snps,dw-i3c-master-1.00a";
+			status = "disabled";
+			reg = <0 0xf1948000 0 0x1000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <0 21 4>;
+		};
+
+		i3c1: i3c@f1958000 {
+			compatible = "snps,dw-i3c-master-1.00a";
+			status = "disabled";
+			reg = <0 0xf1958000 0 0x1000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <0 22 4>;
+		};
+
+		ospi: spi@f1010000 {
+			compatible = "xlnx,versal-ospi-1.0", "cdns,qspi-nor";
+			status = "disabled";
+			reg = <0 0xf1010000 0 0x10000>,
+			      <0 0xc0000000 0 0x20000000>;
+			interrupts = <0 182 4>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,is-dma = <1>; /* u-boot specific */
+			cdns,trigger-address = <0xc0000000>;
+		};
+
+		qspi: spi@f1030000 {
+			compatible = "xlnx,versal-qspi-1.0";
+			status = "disabled";
+			reg = <0 0xf1030000 0 0x1000>;
+			interrupts = <0 183 4>;
+			clock-names = "ref_clk", "pclk";
+		};
+
+		rtc: rtc@f12a0000 {
+			compatible = "xlnx,zynqmp-rtc";
+			status = "disabled";
+			reg = <0 0xf12a0000 0 0x100>;
+			interrupts = <0 200 4>, <0 201 4>;
+			interrupt-names = "alarm", "sec";
+			calibration = <0x7FFF>;
+		};
+
+		sdhci0: mmc@f1040000 {
+			compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a";
+			status = "disabled";
+			reg = <0 0xf1040000 0 0x10000>;
+			interrupts = <0 184 4>;
+			clock-names = "clk_xin", "clk_ahb", "gate";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd0", "clk_in_sd0";
+		};
+
+		sdhci1: mmc@f1050000 {
+			compatible = "xlnx,versal-net-emmc";
+			status = "disabled";
+			reg = <0 0xf1050000 0 0x10000>;
+			interrupts = <0 186 4>;
+			clock-names = "clk_xin", "clk_ahb", "gate";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd1", "clk_in_sd1";
+		};
+
+		serial0: serial@f1920000 {
+			bootph-all;
+			compatible = "arm,pl011", "arm,primecell";
+			status = "disabled";
+			reg = <0 0xf1920000 0 0x1000>;
+			interrupts = <0 25 4>;
+			reg-io-width = <4>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@f1930000 {
+			bootph-all;
+			compatible = "arm,pl011", "arm,primecell";
+			status = "disabled";
+			reg = <0 0xf1930000 0 0x1000>;
+			interrupts = <0 26 4>;
+			reg-io-width = <4>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		smmu: iommu@ec000000 {
+			compatible = "arm,smmu-v3";
+			status = "disabled";
+			reg = <0 0xec000000 0 0x40000>;
+			#iommu-cells = <1>;
+			interrupt-names = "combined";
+			interrupts = <0 169 4>;
+			dma-coherent;
+		};
+
+		spi0: spi@f1960000 {
+			compatible = "cdns,spi-r1p6";
+			status = "disabled";
+			interrupts = <0 23 4>;
+			reg = <0 0xf1960000 0 0x1000>;
+			clock-names = "ref_clk", "pclk";
+		};
+
+		spi1: spi@f1970000 {
+			compatible = "cdns,spi-r1p6";
+			status = "disabled";
+			interrupts = <0 24 4>;
+			reg = <0 0xf1970000 0 0x1000>;
+			clock-names = "ref_clk", "pclk";
+		};
+
+		ttc0: timer@f1dc0000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupts = <0 43 4>, <0 44 4>, <0 45 4>;
+			timer-width = <32>;
+			reg = <0x0 0xf1dc0000 0x0 0x1000>;
+		};
+
+		ttc1: timer@f1dd0000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupts = <0 46 4>, <0 47 4>, <0 48 4>;
+			timer-width = <32>;
+			reg = <0x0 0xf1dd0000 0x0 0x1000>;
+		};
+
+		ttc2: timer@f1de0000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupts = <0 49 4>, <0 50 4>, <0 51 4>;
+			timer-width = <32>;
+			reg = <0x0 0xf1de0000 0x0 0x1000>;
+		};
+
+		ttc3: timer@f1df0000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupts = <0 52 4>, <0 53 4>, <0 54 4>;
+			timer-width = <32>;
+			reg = <0x0 0xf1df0000 0x0 0x1000>;
+		};
+
+		usb0: usb@f1e00000 {
+			compatible = "xlnx,versal-dwc3";
+			status = "disabled";
+			reg = <0 0xf1e00000 0 0x100>;
+			clock-names = "bus_clk", "ref_clk";
+			ranges;
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			dwc3_0: usb@f1b00000  {
+				compatible = "snps,dwc3";
+				status = "disabled";
+				reg = <0 0xf1b00000 0 0x10000>;
+				interrupt-names = "host", "peripheral", "otg", "wakeup";
+				interrupts = <0 29 4>, <0 29 4>, <0 33 4>, <0 98 4>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				dr_mode = "peripheral";
+				maximum-speed = "high-speed";
+				snps,usb3_lpm_capable;
+				clock-names = "ref";
+			};
+		};
+
+		usb1: usb@f1e10000 {
+			compatible = "xlnx,versal-dwc3";
+			status = "disabled";
+			reg = <0x0 0xf1e10000 0x0 0x100>;
+			clock-names = "bus_clk", "ref_clk";
+			ranges;
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			dwc3_1: usb@f1c00000  {
+				compatible = "snps,dwc3";
+				status = "disabled";
+				reg = <0x0 0xf1c00000 0x0 0x10000>;
+				interrupt-names = "host", "peripheral", "otg", "wakeup";
+				interrupts = <0 34 4>, <0 34 4>, <0 38 4>, <0 99 4>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				snps,usb3_lpm_capable;
+				clock-names = "ref";
+			};
+		};
+
+		wwdt0: watchdog@ecc10000 {
+			compatible = "xlnx,versal-wwdt";
+			status = "disabled";
+			reg = <0 0xecc10000 0 0x10000>;
+			timeout-sec = <30>;
+		};
+
+		wwdt1: watchdog@ecd10000 {
+			compatible = "xlnx,versal-wwdt";
+			status = "disabled";
+			reg = <0 0xecd10000 0 0x10000>;
+			timeout-sec = <30>;
+		};
+
+		wwdt2: watchdog@ece10000 {
+			compatible = "xlnx,versal-wwdt";
+			status = "disabled";
+			reg = <0 0xece10000 0 0x10000>;
+			timeout-sec = <30>;
+		};
+
+		wwdt3: watchdog@ecf10000 {
+			compatible = "xlnx,versal-wwdt";
+			status = "disabled";
+			reg = <0 0xecf10000 0 0x10000>;
+			timeout-sec = <30>;
+		};
+
+		lpd_wwdt0: watchdog@ea420000 {
+			compatible = "xlnx,versal-wwdt";
+			status = "disabled";
+			reg = <0 0xea420000 0 0x10000>;
+			timeout-sec = <30>;
+		};
+
+		lpd_wwdt1: watchdog@ea430000 {
+			compatible = "xlnx,versal-wwdt";
+			status = "disabled";
+			reg = <0 0xea430000 0 0x10000>;
+			timeout-sec = <30>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/xlnx-zynqmp-clk.h b/arch/arm64/boot/dts/xilinx/xlnx-zynqmp-clk.h
new file mode 100644
index 000000000000..0aa17f2a2818
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/xlnx-zynqmp-clk.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ *  Copyright (C) 2014-2018 Xilinx, Inc.
+ *
+ */
+
+#ifndef _XLNX_ZYNQMP_CLK_H
+#define _XLNX_ZYNQMP_CLK_H
+
+#define IOPLL			0
+#define RPLL			1
+#define APLL			2
+#define DPLL			3
+#define VPLL			4
+#define IOPLL_TO_FPD		5
+#define RPLL_TO_FPD		6
+#define APLL_TO_LPD		7
+#define DPLL_TO_LPD		8
+#define VPLL_TO_LPD		9
+#define ACPU			10
+#define ACPU_HALF		11
+#define DBF_FPD			12
+#define DBF_LPD			13
+#define DBG_TRACE		14
+#define DBG_TSTMP		15
+#define DP_VIDEO_REF		16
+#define DP_AUDIO_REF		17
+#define DP_STC_REF		18
+#define GDMA_REF		19
+#define DPDMA_REF		20
+#define DDR_REF			21
+#define SATA_REF		22
+#define PCIE_REF		23
+#define GPU_REF			24
+#define GPU_PP0_REF		25
+#define GPU_PP1_REF		26
+#define TOPSW_MAIN		27
+#define TOPSW_LSBUS		28
+#define GTGREF0_REF		29
+#define LPD_SWITCH		30
+#define LPD_LSBUS		31
+#define USB0_BUS_REF		32
+#define USB1_BUS_REF		33
+#define USB3_DUAL_REF		34
+#define USB0			35
+#define USB1			36
+#define CPU_R5			37
+#define CPU_R5_CORE		38
+#define CSU_SPB			39
+#define CSU_PLL			40
+#define PCAP			41
+#define IOU_SWITCH		42
+#define GEM_TSU_REF		43
+#define GEM_TSU			44
+#define GEM0_TX			45
+#define GEM1_TX			46
+#define GEM2_TX			47
+#define GEM3_TX			48
+#define GEM0_RX			49
+#define GEM1_RX			50
+#define GEM2_RX			51
+#define GEM3_RX			52
+#define QSPI_REF		53
+#define SDIO0_REF		54
+#define SDIO1_REF		55
+#define UART0_REF		56
+#define UART1_REF		57
+#define SPI0_REF		58
+#define SPI1_REF		59
+#define NAND_REF		60
+#define I2C0_REF		61
+#define I2C1_REF		62
+#define CAN0_REF		63
+#define CAN1_REF		64
+#define CAN0			65
+#define CAN1			66
+#define DLL_REF			67
+#define ADMA_REF		68
+#define TIMESTAMP_REF		69
+#define AMS_REF			70
+#define PL0_REF			71
+#define PL1_REF			72
+#define PL2_REF			73
+#define PL3_REF			74
+#define WDT			75
+#define IOPLL_INT		76
+#define IOPLL_PRE_SRC		77
+#define IOPLL_HALF		78
+#define IOPLL_INT_MUX		79
+#define IOPLL_POST_SRC		80
+#define RPLL_INT		81
+#define RPLL_PRE_SRC		82
+#define RPLL_HALF		83
+#define RPLL_INT_MUX		84
+#define RPLL_POST_SRC		85
+#define APLL_INT		86
+#define APLL_PRE_SRC		87
+#define APLL_HALF		88
+#define APLL_INT_MUX		89
+#define APLL_POST_SRC		90
+#define DPLL_INT		91
+#define DPLL_PRE_SRC		92
+#define DPLL_HALF		93
+#define DPLL_INT_MUX		94
+#define DPLL_POST_SRC		95
+#define VPLL_INT		96
+#define VPLL_PRE_SRC		97
+#define VPLL_HALF		98
+#define VPLL_INT_MUX		99
+#define VPLL_POST_SRC		100
+#define CAN0_MIO		101
+#define CAN1_MIO		102
+#define ACPU_FULL		103
+#define GEM0_REF		104
+#define GEM1_REF		105
+#define GEM2_REF		106
+#define GEM3_REF		107
+#define GEM0_REF_UNG		108
+#define GEM1_REF_UNG		109
+#define GEM2_REF_UNG		110
+#define GEM3_REF_UNG		111
+#define LPD_WDT			112
+
+#endif /* _XLNX_ZYNQMP_CLK_H */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index 60d1b1acf9a0..52e122fc7c9e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -8,41 +8,46 @@
  * Michal Simek <michal.simek@amd.com>
  */
 
-#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+#include "xlnx-zynqmp-clk.h"
 / {
-	pss_ref_clk: pss_ref_clk {
+	pss_ref_clk: pss-ref-clk {
 		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <33333333>;
+		clock-output-names = "pss_ref_clk";
 	};
 
-	video_clk: video_clk {
+	video_clk: video-clk {
 		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
+		clock-output-names = "video_clk";
 	};
 
-	pss_alt_ref_clk: pss_alt_ref_clk {
+	pss_alt_ref_clk: pss-alt-ref-clk {
 		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
+		clock-output-names = "pss_alt_ref_clk";
 	};
 
-	gt_crx_ref_clk: gt_crx_ref_clk {
+	gt_crx_ref_clk: gt-crx-ref-clk {
 		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <108000000>;
+		clock-output-names = "gt_crx_ref_clk";
 	};
 
-	aux_ref_clk: aux_ref_clk {
+	aux_ref_clk: aux-ref-clk {
 		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
+		clock-output-names = "aux_ref_clk";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
new file mode 100644
index 000000000000..02be5e1e8686
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KD240 revA Carrier Card
+ *
+ * Copyright (C) 2021 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "xlnx,zynqmp-sk-kd240-rev1",
+		     "xlnx,zynqmp-sk-kd240-revB",
+		     "xlnx,zynqmp-sk-kd240-revA",
+		     "xlnx,zynqmp-sk-kd240", "xlnx,zynqmp";
+	model = "ZynqMP KD240 revA/B/1";
+
+	aliases {
+		ethernet0 = "/axi/ethernet@ff0c0000"; /* &gem1 */
+	};
+
+	ina260-u3 {
+		compatible = "iio-hwmon";
+		io-channels = <&u3 0>, <&u3 1>, <&u3 2>;
+	};
+
+	clk_26: clock2 { /* u17 - USB */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_25_0: clock4 { /* u92/u91 - GEM2 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_25_1: clock5 { /* u92/u91 - GEM3 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	u3: ina260@40 { /* u3 */
+		compatible = "ti,ina260";
+		#io-channel-cells = <1>;
+		label = "ina260-u14";
+		reg = <0x40>;
+	};
+
+	slg7xl45106: gpio@11 { /* u13 - reset logic */
+		compatible = "dlg,slg7xl45106";
+		reg = <0x11>;
+		label = "resetchip";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB0_PHY_RESET_B", "",
+				  "SD_RESET_B", "USB0_HUB_RESET_B",
+				  "", "PS_GEM0_RESET_B",
+				  "", "";
+	};
+
+	hub: usb-hub@2d { /* u36 */
+		compatible = "microchip,usb5744";
+		reg = <0x2d>;
+	};
+};
+
+/* USB 3.0 */
+&psgtr {
+	status = "okay";
+	/* usb */
+	clocks = <&clk_26>;
+	clock-names = "ref2";
+};
+
+&usb0 { /* mio52 - mio63 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
+	assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gem1 { /* mdio mio50/51 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem1_default>;
+	assigned-clock-rates = <250000000>;
+
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@8 { /* Adin u31 */
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id0283.bc30";
+			reg = <8>;
+			adi,rx-internal-delay-ps = <2000>;
+			adi,tx-internal-delay-ps = <2000>;
+			adi,fifo-depth-bits = <8>;
+			reset-assert-us = <10>;
+			reset-deassert-us = <5000>;
+			reset-gpios = <&gpio 77 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* 2 more ethernet phys u32@2 and u34@3 */
+
+&pinctrl0 { /* required by spec */
+	status = "okay";
+
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_16_grp";
+		};
+
+		conf {
+			groups = "can0_16_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO66";
+			bias-pull-up;
+		};
+
+		conf-tx {
+			pins = "MIO67";
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		conf {
+			groups = "uart0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO70";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO71";
+			bias-disable;
+		};
+
+		mux {
+			groups = "uart0_17_grp";
+			function = "uart0";
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		conf {
+			groups = "uart1_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO37";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO36";
+			bias-disable;
+			output-enable;
+		};
+
+		mux {
+			groups = "uart1_9_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		conf {
+			groups = "i2c1_6_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "i2c1_6_grp";
+			function = "i2c1";
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		conf {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			function = "gpio0";
+		};
+	};
+
+	pinctrl_gem1_default: gem1-default {
+		conf {
+			groups = "ethernet1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO45", "MIO46", "MIO47", "MIO48";
+			bias-disable;
+			low-power-disable;
+		};
+
+		conf-bootstrap {
+			pins = "MIO44", "MIO49";
+			bias-disable;
+			output-enable;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO38", "MIO39", "MIO40",
+				"MIO41", "MIO42", "MIO43";
+			bias-disable;
+			output-enable;
+			low-power-enable;
+		};
+
+		conf-mdio {
+			groups = "mdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			output-enable;
+		};
+
+		mux-mdio {
+			function = "mdio1";
+			groups = "mdio1_0_grp";
+		};
+
+		mux {
+			function = "ethernet1";
+			groups = "ethernet1_0_grp";
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			"MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		conf {
+			groups = "usb1_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			"MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	rts-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-delay = <10 10>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	assigned-clock-rates = <100000000>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&zynqmp_dpsub {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
new file mode 100644
index 000000000000..b92dcb86e87e
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KR260 revA Carrier Card
+ *
+ * (C) Copyright 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "xlnx,zynqmp-sk-kr260-revA",
+		     "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp";
+	model = "ZynqMP KR260 revA";
+
+	aliases {
+		ethernet0 = "/axi/ethernet@ff0b0000"; /* &gem0 */
+		ethernet1 = "/axi/ethernet@ff0c0000"; /* &gem1 */
+	};
+
+	ina260-u14 {
+		compatible = "iio-hwmon";
+		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
+	};
+
+	clk_27: clock0 { /* u86 - DP */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	clk_125: si5332-0 { /* u17 - GEM0/1 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clk_74: si5332-5 { /* u17 - SLVC-EC */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	clk_26: si5332-2 { /* u17 - USB */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_156: si5332-3 { /* u17 - SFP+ */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <156250000>;
+	};
+
+	clk_25_0: si5332-1 { /* u17 - GEM2 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_25_1: si5332-4 { /* u17 - GEM3 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
+};
+
+&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	u14: ina260@40 { /* u14 */
+		compatible = "ti,ina260";
+		#io-channel-cells = <1>;
+		label = "ina260-u14";
+		reg = <0x40>;
+	};
+
+	slg7xl45106: gpio@11 { /* u19 - reset logic */
+		compatible = "dlg,slg7xl45106";
+		reg = <0x11>;
+		label = "resetchip";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
+				  "SD_RESET_B", "USB0_HUB_RESET_B",
+				  "USB1_HUB_RESET_B", "PS_GEM0_RESET_B",
+				  "PS_GEM1_RESET_B", "";
+	};
+
+	i2c-mux@74 { /* u18 */
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		usbhub_i2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			hub_1: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
+		};
+		usbhub_i2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			hub_2: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
+		};
+		/* Bus 2/3 are not connected */
+	};
+
+	/* si5332@6a - u17 - clock-generator */
+};
+
+/* GEM SGMII/DP and USB 3.0 */
+&psgtr {
+	status = "okay";
+	/* gem0/1, dp, usb */
+	clocks = <&clk_125>, <&clk_27>, <&clk_26>;
+	clock-names = "ref0", "ref1", "ref2";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>;
+	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+	assigned-clock-rates = <600000000>;
+};
+
+&usb0 { /* mio52 - mio63 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
+	assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usb1 { /* mio64 - mio75 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
+	reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
+	assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub1_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub1_3_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub1_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub1_2_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gem0 { /* mdio mio50/51 */
+	status = "okay";
+	phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>;
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	assigned-clock-rates = <250000000>;
+};
+
+&gem1 { /* mdio mio50/51, gem mio38 - mio49 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem1_default>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	assigned-clock-rates = <250000000>;
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@4 { /* u81 */
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <4>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <300>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>;
+		};
+		phy1: ethernet-phy@8 { /* u36 */
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <8>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* gem2/gem3 via PL with phys u79@2 and u80@3 */
+
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_uart1_default: uart1-default {
+		conf {
+			groups = "uart1_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO37";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO36";
+			bias-disable;
+			output-enable;
+		};
+
+		mux {
+			groups = "uart1_9_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		conf {
+			groups = "i2c1_6_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "i2c1_6_grp";
+			function = "i2c1";
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		conf {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			function = "gpio0";
+		};
+	};
+
+	pinctrl_gem1_default: gem1-default {
+		conf {
+			groups = "ethernet1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO44", "MIO46", "MIO48";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-bootstrap {
+			pins = "MIO45", "MIO47", "MIO49";
+			bias-disable;
+			output-enable;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO38", "MIO39", "MIO40",
+				"MIO41", "MIO42", "MIO43";
+			bias-disable;
+			output-enable;
+			low-power-enable;
+		};
+
+		conf-mdio {
+			groups = "mdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			output-enable;
+		};
+
+		mux-mdio {
+			function = "mdio1";
+			groups = "mdio1_0_grp";
+		};
+
+		mux {
+			function = "ethernet1";
+			groups = "ethernet1_0_grp";
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			"MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		conf {
+			groups = "usb1_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			"MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
new file mode 100644
index 000000000000..99ad220d13d6
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KR260 revB Carrier Card (A03 revision)
+ *
+ * (C) Copyright 2021 - 2022, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "xlnx,zynqmp-sk-kr260-revB",
+		     "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp";
+	model = "ZynqMP KR260 revB";
+
+	aliases {
+		ethernet0 = "/axi/ethernet@ff0b0000"; /* &gem0 */
+		ethernet1 = "/axi/ethernet@ff0c0000"; /* &gem1 */
+	};
+
+	ina260-u14 {
+		compatible = "iio-hwmon";
+		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
+	};
+
+	clk_125: clock0 { /* u87 - GEM0/1 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clk_27: clock1 { /* u86 - DP */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	clk_26: clock2 { /* u89 - USB */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_156: clock3 { /* u90 - SFP+ */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <156250000>;
+	};
+
+	clk_25_0: clock4 { /* u92/u91 - GEM2 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_25_1: clock5 { /* u92/u91 - GEM3 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_74: clock6 { /* u88 - SLVC-EC */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
+};
+
+&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	u14: ina260@40 { /* u14 */
+		compatible = "ti,ina260";
+		#io-channel-cells = <1>;
+		label = "ina260-u14";
+		reg = <0x40>;
+	};
+
+	slg7xl45106: gpio@11 { /* u19 - reset logic */
+		compatible = "dlg,slg7xl45106";
+		reg = <0x11>;
+		label = "resetchip";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
+				  "SD_RESET_B", "USB0_HUB_RESET_B",
+				  "USB1_HUB_RESET_B", "PS_GEM0_RESET_B",
+				  "PS_GEM1_RESET_B", "";
+	};
+
+	i2c-mux@74 { /* u18 */
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		usbhub_i2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			hub_1: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
+		};
+		usbhub_i2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			hub_2: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
+		};
+		/* Bus 2/3 are not connected */
+	};
+
+	/* si5332@6a - u17 - clock-generator */
+};
+
+/* GEM SGMII/DP and USB 3.0 */
+&psgtr {
+	status = "okay";
+	/* gem0/1, dp, usb */
+	clocks = <&clk_125>, <&clk_27>, <&clk_26>;
+	clock-names = "ref0", "ref1", "ref2";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>;
+	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+	assigned-clock-rates = <600000000>;
+};
+
+&usb0 { /* mio52 - mio63 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
+	assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usb1 { /* mio64 - mio75 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
+	reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
+	assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub1_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub1_3_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub1_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub1_2_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gem0 { /* mdio mio50/51 */
+	status = "okay";
+	phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>;
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	assigned-clock-rates = <250000000>;
+};
+
+&gem1 { /* mdio mio50/51, gem mio38 - mio49 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem1_default>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	assigned-clock-rates = <250000000>;
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@4 { /* u81 */
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <4>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <300>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>;
+		};
+		phy1: ethernet-phy@8 { /* u36 */
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <8>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* gem2/gem3 via PL with phys u79@2 and u80@3 */
+
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_uart1_default: uart1-default {
+		conf {
+			groups = "uart1_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO37";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO36";
+			bias-disable;
+			output-enable;
+		};
+
+		mux {
+			groups = "uart1_9_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		conf {
+			groups = "i2c1_6_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "i2c1_6_grp";
+			function = "i2c1";
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		conf {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			function = "gpio0";
+		};
+	};
+
+	pinctrl_gem1_default: gem1-default {
+		conf {
+			groups = "ethernet1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO44", "MIO46", "MIO48";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-bootstrap {
+			pins = "MIO45", "MIO47", "MIO49";
+			bias-disable;
+			output-enable;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO38", "MIO39", "MIO40",
+				"MIO41", "MIO42", "MIO43";
+			bias-disable;
+			output-enable;
+			low-power-enable;
+		};
+
+		conf-mdio {
+			groups = "mdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			output-enable;
+		};
+
+		mux-mdio {
+			function = "mdio1";
+			groups = "mdio1_0_grp";
+		};
+
+		mux {
+			function = "ethernet1";
+			groups = "ethernet1_0_grp";
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			"MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		conf {
+			groups = "usb1_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			"MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index 95d16904d765..d7351a17d3e8 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -28,6 +28,10 @@
 		     "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
 	model = "ZynqMP KV260 revA";
 
+	aliases {
+		ethernet0 = "/axi/ethernet@ff0e0000"; /* &gem3 */
+	};
+
 	ina260-u14 {
 		compatible = "iio-hwmon";
 		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
@@ -68,6 +72,17 @@
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
@@ -118,6 +133,12 @@
 	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
 };
 
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
+
 &zynqmp_dpdma {
 	status = "okay";
 	assigned-clock-rates = <600000000>;
@@ -129,7 +150,6 @@
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
-	/* missing usb5744 - u43 */
 };
 
 &dwc3_0 {
@@ -137,6 +157,24 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index a74d0ac7e07a..a4ae37ebaccf 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -23,6 +23,10 @@
 		     "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
 	model = "ZynqMP KV260 revB";
 
+	aliases {
+		ethernet0 = "/axi/ethernet@ff0e0000"; /* &gem3 */
+	};
+
 	ina260-u14 {
 		compatible = "iio-hwmon";
 		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
@@ -92,7 +96,10 @@
 		label = "ina260-u14";
 		reg = <0x40>;
 	};
-	/* u43 - 0x2d - USB hub */
+	hub: usb-hub@2d {
+		compatible = "microchip,usb5744";
+		reg = <0x2d>;
+	};
 	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
 };
 
@@ -109,13 +116,11 @@
 	phy-names = "dp-phy0", "dp-phy1";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
 	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
 
-	ports {
-		port@5 {
-			dpsub_dp_out: endpoint {
-				remote-endpoint = <&dpcon_in>;
-			};
-		};
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
 	};
 };
 
@@ -138,6 +143,26 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k24-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k24-revA.dts
new file mode 100644
index 000000000000..653bd9362264
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k24-revA.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SM-K24 RevA
+ *
+ * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ * (C) Copyright 2022, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sm-k26-revA.dts"
+
+/ {
+	model = "ZynqMP SM-K24 RevA/B/1";
+	compatible = "xlnx,zynqmp-sm-k24-rev1", "xlnx,zynqmp-sm-k24-revB",
+		     "xlnx,zynqmp-sm-k24-revA", "xlnx,zynqmp-sm-k24",
+		     "xlnx,zynqmp";
+
+	memory@0 {
+		device_type = "memory"; /* 2GB */
+		reg = <0 0 0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index bfa7ea6b9224..500af1d2232f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -90,10 +90,10 @@
 		};
 	};
 
-	pwm-fan {
+	pwm_fan: pwm-fan {
 		compatible = "pwm-fan";
 		status = "okay";
-		pwms = <&ttc0 2 40000 0>;
+		pwms = <&ttc0 2 40000 1>;
 	};
 };
 
@@ -233,6 +233,9 @@
 	pinctrl-0 = <&pinctrl_sdhci0_default>;
 	non-removable;
 	disable-wp;
+	no-sd;
+	no-sdio;
+	cap-mmc-hw-reset;
 	bus-width = <8>;
 	xlnx,mio-bank = <0>;
 	assigned-clock-rates = <187498123>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k24-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k24-revA.dts
new file mode 100644
index 000000000000..7308983b15a0
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k24-revA.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SMK-K24 RevA
+ *
+ * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ * (C) Copyright 2022, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sm-k24-revA.dts"
+
+/ {
+	model = "ZynqMP SMK-K24 RevA";
+	compatible = "xlnx,zynqmp-smk-k24-revA", "xlnx,zynqmp-smk-k24",
+		     "xlnx,zynqmp";
+};
+
+&sdhci0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 1850325e1d6c..2ad7423c2f05 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -135,7 +135,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_nand0_default>;
-	arasan,has-mdma;
 
 	nand@0 {
 		reg = <0x0>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
index f553b317e6b2..8fbc33562bc4 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -129,7 +129,6 @@
 /* MT29F64G08AECDBJ4-6 */
 &nand0 {
 	status = "okay";
-	arasan,has-mdma;
 	num-cs = <2>;
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 62c2503a502a..4ec8a400494e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -134,6 +134,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &dcc {
@@ -509,6 +521,9 @@
 	xlnx,mio-bank = <0>;
 	non-removable;
 	disable-wp;
+	no-sd;
+	no-sdio;
+	cap-mmc-hw-reset;
 	cap-power-off-card;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	vqmmc-supply = <&wmmcsdio_fixed>;
@@ -604,3 +619,9 @@
 	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
 	       <&psgtr 0 PHY_TYPE_DP 1 1>;
 };
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 7e26489a1539..e172a30e7b21 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -151,6 +151,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <114285000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -1045,3 +1057,9 @@
 	phy-names = "dp-phy0";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 3>;
 };
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index eb2090673ec1..fe8f151ed706 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -60,6 +60,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -529,3 +541,9 @@
 	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
 	       <&psgtr 0 PHY_TYPE_DP 1 3>;
 };
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index 4694d0a841f1..3ee8ab224722 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -65,6 +65,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -541,3 +553,9 @@
 	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
 	       <&psgtr 0 PHY_TYPE_DP 1 3>;
 };
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 7beedd730f94..7f6c87d4d77e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -808,8 +808,8 @@
 			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 			       "MIO60", "MIO61", "MIO62", "MIO63";
 			bias-disable;
-			drive-strength = <4>;
-			slew-rate = <SLEW_RATE_SLOW>;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
 		};
 	};
 
@@ -1042,12 +1042,10 @@
 	phy-names = "dp-phy0", "dp-phy1";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
 	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
 
-	ports {
-		port@5 {
-			dpsub_dp_out: endpoint {
-				remote-endpoint = <&dpcon_in>;
-			};
-		};
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
 	};
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index b67ff7ecf3c3..428b5558fbba 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -129,6 +129,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &dcc {
@@ -494,7 +506,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
-				sc18is603@2f { /* sc18is602 - u93 */
+				sc18is603: spi@2f { /* sc18is602 - u93 */
 					compatible = "nxp,sc18is603";
 					reg = <0x2f>;
 					/* 4 gpios for CS not handled by driver */
@@ -864,3 +876,9 @@
 	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
 	       <&psgtr 0 PHY_TYPE_DP 1 1>;
 };
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 467f084c6469..938b014ca923 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -187,7 +187,7 @@
 	};
 
 	psci {
-		compatible = "arm,psci-0.2";
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
 	};
 
@@ -550,6 +550,7 @@
 			reg = <0x0 0xfec10000 0x0 0x1000>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu0>;
+			status = "disabled";
 		};
 
 		cpu1_debug: debug@fed10000 {
@@ -557,6 +558,7 @@
 			reg = <0x0 0xfed10000 0x0 0x1000>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu1>;
+			status = "disabled";
 		};
 
 		cpu2_debug: debug@fee10000 {
@@ -564,6 +566,7 @@
 			reg = <0x0 0xfee10000 0x0 0x1000>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu2>;
+			status = "disabled";
 		};
 
 		cpu3_debug: debug@fef10000 {
@@ -571,6 +574,7 @@
 			reg = <0x0 0xfef10000 0x0 0x1000>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu3>;
+			status = "disabled";
 		};
 
 		/* GDMA */
@@ -1306,32 +1310,35 @@
 				      "dp_vtc_pixel_clk_in";
 			power-domains = <&zynqmp_firmware PD_DP>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
-			dma-names = "vid0", "vid1", "vid2", "gfx0";
+			dma-names = "vid0", "vid1", "vid2", "gfx0",
+				    "aud0", "aud1";
 			dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
 			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
 			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
-			       <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO0>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO1>;
 
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				live_video: port@0 {
 					reg = <0>;
 				};
-				port@1 {
+				live_gfx: port@1 {
 					reg = <1>;
 				};
-				port@2 {
+				live_audio: port@2 {
 					reg = <2>;
 				};
-				port@3 {
+				out_video: port@3 {
 					reg = <3>;
 				};
-				port@4 {
+				out_audio: port@4 {
 					reg = <4>;
 				};
-				port@5 {
+				out_dp: port@5 {
 					reg = <5>;
 				};
 			};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c62831e61586..45288ec9eaf7 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -38,12 +38,17 @@ CONFIG_ARCH_AIROHA=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_APPLE=y
+CONFIG_ARCH_ARTPEC=y
+CONFIG_ARCH_AXIADO=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
 CONFIG_ARCH_BCM_IPROC=y
 CONFIG_ARCH_BCMBCA=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
+CONFIG_ARCH_BLAIZE=y
+CONFIG_ARCH_BST=y
+CONFIG_ARCH_CIX=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_SPARX5=y
 CONFIG_ARCH_K3=y
@@ -65,6 +70,7 @@ CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SEATTLE=y
 CONFIG_ARCH_INTEL_SOCFPGA=y
+CONFIG_ARCH_SOPHGO=y
 CONFIG_ARCH_STM32=y
 CONFIG_ARCH_SYNQUACER=y
 CONFIG_ARCH_TEGRA=y
@@ -77,8 +83,6 @@ CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VISCONTI=y
 CONFIG_ARCH_XGENE=y
 CONFIG_ARCH_ZYNQMP=y
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_SMT=y
 CONFIG_NUMA=y
 CONFIG_XEN=y
 CONFIG_COMPAT=y
@@ -176,6 +180,7 @@ CONFIG_NET_CLS_FLOWER=m
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_NET_ACT_MIRRED=m
+CONFIG_HSR=m
 CONFIG_NET_ACT_GATE=m
 CONFIG_QRTR_SMD=m
 CONFIG_QRTR_TUN=m
@@ -200,10 +205,13 @@ CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_LEDS=y
 CONFIG_RFKILL=m
+CONFIG_RFKILL_GPIO=m
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
 CONFIG_NFC=m
 CONFIG_NFC_NCI=m
+CONFIG_NFC_NXP_NCI=m
+CONFIG_NFC_NXP_NCI_I2C=m
 CONFIG_NFC_S3FWRN5_I2C=m
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
@@ -258,10 +266,13 @@ CONFIG_GOOGLE_FIRMWARE=y
 CONFIG_GOOGLE_CBMEM=m
 CONFIG_GOOGLE_COREBOOT_TABLE=m
 CONFIG_EFI_CAPSULE_LOADER=y
+CONFIG_IMX_AIPSTZ=m
 CONFIG_IMX_SCU=y
 CONFIG_QCOM_TZMEM_MODE_SHMBRIDGE=y
 CONFIG_QCOM_QSEECOM=y
 CONFIG_QCOM_QSEECOM_UEFISECAPP=y
+CONFIG_EXYNOS_ACPM_PROTOCOL=m
+CONFIG_TEGRA_BPMP=y
 CONFIG_GNSS=m
 CONFIG_GNSS_MTK_SERIAL=m
 CONFIG_MTD=y
@@ -282,6 +293,7 @@ CONFIG_MTD_NAND_BRCMNAND=m
 CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NAND=m
 CONFIG_MTD_UBI=m
 CONFIG_MTD_HYPERBUS=m
 CONFIG_HBMC_AM654=m
@@ -330,6 +342,7 @@ CONFIG_VIRTIO_NET=y
 CONFIG_MHI_NET=m
 CONFIG_NET_DSA_BCM_SF2=m
 CONFIG_NET_DSA_MSCC_FELIX=m
+CONFIG_ENA_ETHERNET=m
 CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
 CONFIG_ATL1C=m
@@ -343,8 +356,10 @@ CONFIG_FSL_FMAN=y
 CONFIG_FSL_DPAA_ETH=y
 CONFIG_FSL_DPAA2_ETH=y
 CONFIG_FSL_ENETC=y
+CONFIG_NXP_ENETC4=m
 CONFIG_FSL_ENETC_VF=y
 CONFIG_FSL_ENETC_QOS=y
+CONFIG_NXP_NETC_BLK_CTRL=m
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_HNS_DSAF=y
 CONFIG_HNS_ENET=y
@@ -358,6 +373,8 @@ CONFIG_IGBVF=y
 CONFIG_MVNETA=y
 CONFIG_MVPP2=y
 CONFIG_SKY2=y
+CONFIG_NET_VENDOR_MEDIATEK=y
+CONFIG_NET_MEDIATEK_STAR_EMAC=m
 CONFIG_MLX4_EN=m
 CONFIG_MLX5_CORE=m
 CONFIG_MLX5_CORE_EN=y
@@ -373,6 +390,7 @@ CONFIG_SMSC911X=y
 CONFIG_SNI_AVE=y
 CONFIG_SNI_NETSEC=y
 CONFIG_STMMAC_ETH=m
+CONFIG_DWMAC_MEDIATEK=m
 CONFIG_DWMAC_TEGRA=m
 CONFIG_TI_K3_AM65_CPSW_NUSS=y
 CONFIG_TI_ICSSG_PRUETH=m
@@ -428,6 +446,7 @@ CONFIG_IWLMVM=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
 CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
 CONFIG_MT7921E=m
 CONFIG_RSI_91X=m
 CONFIG_WL18XX=m
@@ -450,7 +469,9 @@ CONFIG_TOUCHSCREEN_GOODIX=m
 CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI=m
 CONFIG_TOUCHSCREEN_ELAN=m
 CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_HIMAX_HX83112B=m
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AW86927=m
 CONFIG_INPUT_BBNSM_PWRKEY=m
 CONFIG_INPUT_PM8941_PWRKEY=y
 CONFIG_INPUT_PM8XXX_VIBRATOR=m
@@ -486,6 +507,7 @@ CONFIG_SERIAL_TEGRA_TCU=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_RSCI=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_QCOM_GENI=y
@@ -516,6 +538,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PINCTRL=m
 CONFIG_I2C_BCM2835=m
 CONFIG_I2C_CADENCE=m
 CONFIG_I2C_DESIGNWARE_CORE=y
@@ -565,22 +588,27 @@ CONFIG_SPI_ROCKCHIP=y
 CONFIG_SPI_ROCKCHIP_SFC=m
 CONFIG_SPI_RPCIF=m
 CONFIG_SPI_RSPI=m
+CONFIG_SPI_RZV2H_RSPI=m
 CONFIG_SPI_RZV2M_CSI=m
 CONFIG_SPI_QCOM_QSPI=m
 CONFIG_SPI_QUP=y
 CONFIG_SPI_QCOM_GENI=m
 CONFIG_SPI_S3C64XX=y
 CONFIG_SPI_SH_MSIOF=m
+CONFIG_SPI_STM32_OSPI=m
 CONFIG_SPI_SUN6I=y
 CONFIG_SPI_TEGRA210_QUAD=m
 CONFIG_SPI_TEGRA114=m
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_SPMI_MTK_PMIF=m
+CONFIG_PINCTRL_BRCMSTB=y
+CONFIG_PINCTRL_BCM2712=y
 CONFIG_PINCTRL_DA9062=m
 CONFIG_PINCTRL_MAX77620=y
 CONFIG_PINCTRL_RK805=m
 CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_SX150X=m
 CONFIG_PINCTRL_OWL=y
 CONFIG_PINCTRL_S700=y
 CONFIG_PINCTRL_S900=y
@@ -592,10 +620,13 @@ CONFIG_PINCTRL_IMX8QM=y
 CONFIG_PINCTRL_IMX8QXP=y
 CONFIG_PINCTRL_IMX8DXL=y
 CONFIG_PINCTRL_IMX8ULP=y
+CONFIG_PINCTRL_IMX91=y
 CONFIG_PINCTRL_IMX93=y
+CONFIG_PINCTRL_IMX_SCMI=y
 CONFIG_PINCTRL_MSM=y
 CONFIG_PINCTRL_IPQ5018=y
 CONFIG_PINCTRL_IPQ5332=y
+CONFIG_PINCTRL_IPQ5424=y
 CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ6018=y
 CONFIG_PINCTRL_IPQ9574=y
@@ -607,8 +638,11 @@ CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_MSM8998=y
 CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
+CONFIG_PINCTRL_QCS615=y
+CONFIG_PINCTRL_QCS8300=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QDU1000=y
+CONFIG_PINCTRL_RP1=m
 CONFIG_PINCTRL_SA8775P=y
 CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SC7280=y
@@ -629,6 +663,7 @@ CONFIG_PINCTRL_SM8350=y
 CONFIG_PINCTRL_SM8450=y
 CONFIG_PINCTRL_SM8550=y
 CONFIG_PINCTRL_SM8650=y
+CONFIG_PINCTRL_SM8750=y
 CONFIG_PINCTRL_X1E80100=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_LPASS_LPI=m
@@ -640,6 +675,7 @@ CONFIG_PINCTRL_SM8450_LPASS_LPI=m
 CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m
 CONFIG_PINCTRL_SM8550_LPASS_LPI=m
 CONFIG_PINCTRL_SM8650_LPASS_LPI=m
+CONFIG_PINCTRL_SOPHGO_SG2000=y
 CONFIG_GPIO_ALTERA=m
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
@@ -660,12 +696,14 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_ADP5585=m
 CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_TPIC2810=m
 CONFIG_GPIO_BD9571MWV=m
 CONFIG_GPIO_MAX77620=y
 CONFIG_GPIO_SL28CPLD=m
 CONFIG_GPIO_AGGREGATOR=m
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_QCOM_PON=m
+CONFIG_POWER_RESET_TORADEX_EC=m
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
@@ -690,6 +728,8 @@ CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_SL28CPLD=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
+CONFIG_SENSORS_TMP102=m
+CONFIG_MISC_RP1=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
@@ -703,6 +743,8 @@ CONFIG_ROCKCHIP_THERMAL=m
 CONFIG_RCAR_THERMAL=y
 CONFIG_RCAR_GEN3_THERMAL=y
 CONFIG_RZG2L_THERMAL=y
+CONFIG_RZG3E_THERMAL=y
+CONFIG_RZG3S_THERMAL=m
 CONFIG_ARMADA_THERMAL=y
 CONFIG_MTK_THERMAL=m
 CONFIG_MTK_LVTS_THERMAL=m
@@ -737,6 +779,7 @@ CONFIG_MESON_WATCHDOG=m
 CONFIG_ARM_SMC_WATCHDOG=y
 CONFIG_RENESAS_WDT=y
 CONFIG_RENESAS_RZG2LWDT=y
+CONFIG_RENESAS_RZV2HWDT=y
 CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM2835_WDT=y
@@ -751,12 +794,14 @@ CONFIG_MFD_EXYNOS_LPASS=m
 CONFIG_MFD_HI6421_PMIC=y
 CONFIG_MFD_HI655X_PMIC=y
 CONFIG_MFD_MAX77620=y
+CONFIG_MFD_MAX77759=m
 CONFIG_MFD_MT6360=y
 CONFIG_MFD_MT6397=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK8XX_I2C=y
 CONFIG_MFD_RK8XX_SPI=y
-CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SEC_ACPM=m
+CONFIG_MFD_SEC_I2C=y
 CONFIG_MFD_SL28CPLD=y
 CONFIG_RZ_MTU3=y
 CONFIG_MFD_TI_AM335X_TSCADC=m
@@ -764,8 +809,11 @@ CONFIG_MFD_TI_LP873X=m
 CONFIG_MFD_TPS65219=y
 CONFIG_MFD_TPS6594_I2C=m
 CONFIG_MFD_ROHM_BD718XX=y
+CONFIG_MFD_STM32_LPTIMER=m
+CONFIG_MFD_STM32_TIMERS=m
 CONFIG_MFD_WCD934X=m
 CONFIG_MFD_KHADAS_MCU=m
+CONFIG_MFD_QCOM_PM8008=m
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_BD718XX=y
@@ -791,6 +839,7 @@ CONFIG_REGULATOR_PCA9450=y
 CONFIG_REGULATOR_PF8X00=y
 CONFIG_REGULATOR_PFUZE100=y
 CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_PM8008=m
 CONFIG_REGULATOR_QCOM_REFGEN=m
 CONFIG_REGULATOR_QCOM_RPMH=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
@@ -828,12 +877,14 @@ CONFIG_VIDEO_MEDIATEK_JPEG=m
 CONFIG_VIDEO_MEDIATEK_VCODEC=m
 CONFIG_VIDEO_WAVE_VPU=m
 CONFIG_VIDEO_E5010_JPEG_ENC=m
+CONFIG_VIDEO_MEDIATEK_MDP3=m
 CONFIG_VIDEO_IMX7_CSI=m
 CONFIG_VIDEO_IMX_MIPI_CSIS=m
 CONFIG_VIDEO_IMX8_ISI=m
 CONFIG_VIDEO_IMX8_ISI_M2M=y
 CONFIG_VIDEO_IMX8_JPEG=m
 CONFIG_VIDEO_QCOM_CAMSS=m
+CONFIG_VIDEO_QCOM_IRIS=m
 CONFIG_VIDEO_QCOM_VENUS=m
 CONFIG_VIDEO_RCAR_ISP=m
 CONFIG_VIDEO_RCAR_CSI2=m
@@ -844,10 +895,14 @@ CONFIG_VIDEO_RENESAS_FCP=m
 CONFIG_VIDEO_RENESAS_FDP1=m
 CONFIG_VIDEO_RENESAS_VSP1=m
 CONFIG_VIDEO_RCAR_DRIF=m
+CONFIG_VIDEO_ROCKCHIP_CIF=m
+CONFIG_VIDEO_ROCKCHIP_RGA=m
 CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
 CONFIG_VIDEO_SUN6I_CSI=m
+CONFIG_VIDEO_SYNOPSYS_HDMIRX=m
+CONFIG_VIDEO_SYNOPSYS_HDMIRX_LOAD_DEFAULT_EDID=y
 CONFIG_VIDEO_TI_J721E_CSI2RX=m
 CONFIG_VIDEO_HANTRO=m
 CONFIG_VIDEO_IMX219=m
@@ -871,7 +926,9 @@ CONFIG_DRM_ROCKCHIP=m
 CONFIG_ROCKCHIP_VOP2=y
 CONFIG_ROCKCHIP_ANALOGIX_DP=y
 CONFIG_ROCKCHIP_CDN_DP=y
+CONFIG_ROCKCHIP_DW_DP=y
 CONFIG_ROCKCHIP_DW_HDMI=y
+CONFIG_ROCKCHIP_DW_HDMI_QP=y
 CONFIG_ROCKCHIP_DW_MIPI_DSI=y
 CONFIG_ROCKCHIP_INNO_HDMI=y
 CONFIG_ROCKCHIP_LVDS=y
@@ -890,16 +947,25 @@ CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
 CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_PANEL_EDP=m
+CONFIG_DRM_PANEL_HIMAX_HX8279=m
+CONFIG_DRM_PANEL_HIMAX_HX83112A=m
+CONFIG_DRM_PANEL_HIMAX_HX83112B=m
 CONFIG_DRM_PANEL_ILITEK_ILI9882T=m
 CONFIG_DRM_PANEL_KHADAS_TS050=m
 CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
+CONFIG_DRM_PANEL_NOVATEK_NT36672A=m
 CONFIG_DRM_PANEL_NOVATEK_NT36672E=m
+CONFIG_DRM_PANEL_NOVATEK_NT37801=m
 CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
+CONFIG_DRM_PANEL_RAYDIUM_RM692E5=m
 CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=m
 CONFIG_DRM_PANEL_SITRONIX_ST7703=m
+CONFIG_DRM_PANEL_STARTEK_KD070FHFID015=m
 CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
 CONFIG_DRM_PANEL_VISIONOX_VTDR6130=m
+CONFIG_DRM_DISPLAY_CONNECTOR=m
 CONFIG_DRM_FSL_LDB=m
+CONFIG_DRM_ITE_IT6263=m
 CONFIG_DRM_LONTIUM_LT8912B=m
 CONFIG_DRM_LONTIUM_LT9611=m
 CONFIG_DRM_LONTIUM_LT9611UXC=m
@@ -918,10 +984,12 @@ CONFIG_DRM_TI_SN65DSI86=m
 CONFIG_DRM_ANALOGIX_ANX7625=m
 CONFIG_DRM_I2C_ADV7511=m
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
+CONFIG_DRM_CDNS_DSI=m
 CONFIG_DRM_CDNS_MHDP8546=m
 CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE=m
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
 CONFIG_DRM_DW_HDMI_CEC=m
+CONFIG_DRM_DW_HDMI_QP_CEC=y
 CONFIG_DRM_IMX_DCSS=m
 CONFIG_DRM_V3D=m
 CONFIG_DRM_VC4=m
@@ -944,16 +1012,20 @@ CONFIG_FB=y
 CONFIG_FB_EFI=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_QCOM_WLED=m
 CONFIG_BACKLIGHT_LP855X=m
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
+CONFIG_SOUND=m
+CONFIG_SND=m
 CONFIG_SND_ALOOP=m
 CONFIG_SND_HDA_TEGRA=m
 CONFIG_SND_HDA_CODEC_HDMI=m
-CONFIG_SND_SOC=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_AUDIO_QMI=m
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_USB=m
 CONFIG_SND_BCM2835_SOC_I2S=m
 CONFIG_SND_SOC_FSL_ASRC=m
 CONFIG_SND_SOC_FSL_MICFIL=m
@@ -965,6 +1037,8 @@ CONFIG_SND_SOC_IMX_AUDMIX=m
 CONFIG_SND_SOC_MT8183=m
 CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m
 CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m
+CONFIG_SND_SOC_MT8188=m
+CONFIG_SND_SOC_MT8188_MT6359=m
 CONFIG_SND_SOC_MT8192=m
 CONFIG_SND_SOC_MT8192_MT6359_RT1015_RT5682=m
 CONFIG_SND_SOC_MT8195=m
@@ -975,6 +1049,7 @@ CONFIG_SND_MESON_AXG_SOUND_CARD=m
 CONFIG_SND_MESON_GX_SOUND_CARD=m
 CONFIG_SND_SOC_QCOM=m
 CONFIG_SND_SOC_APQ8016_SBC=m
+CONFIG_SND_SOC_QDSP6_USB=m
 CONFIG_SND_SOC_MSM8996=m
 CONFIG_SND_SOC_SDM845=m
 CONFIG_SND_SOC_SM8250=m
@@ -984,15 +1059,18 @@ CONFIG_SND_SOC_SC7280=m
 CONFIG_SND_SOC_X1E80100=m
 CONFIG_SND_SOC_ROCKCHIP=m
 CONFIG_SND_SOC_ROCKCHIP_I2S_TDM=m
+CONFIG_SND_SOC_ROCKCHIP_SAI=m
 CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
 CONFIG_SND_SOC_ROCKCHIP_RT5645=m
 CONFIG_SND_SOC_RK3399_GRU_SOUND=m
-CONFIG_SND_SOC_SAMSUNG=y
 CONFIG_SND_SOC_RCAR=m
+CONFIG_SND_SOC_MSIOF=m
 CONFIG_SND_SOC_RZ=m
+CONFIG_SND_SOC_SAMSUNG=m
 CONFIG_SND_SOC_SOF_TOPLEVEL=y
-CONFIG_SND_SOC_SOF_OF=y
+CONFIG_SND_SOC_SOF_OF=m
 CONFIG_SND_SOC_SOF_MTK_TOPLEVEL=y
+CONFIG_SND_SOC_SOF_MT8186=m
 CONFIG_SND_SOC_SOF_MT8195=m
 CONFIG_SND_SUN8I_CODEC=m
 CONFIG_SND_SUN8I_CODEC_ANALOG=m
@@ -1021,6 +1099,7 @@ CONFIG_SND_SOC_DA7213=m
 CONFIG_SND_SOC_ES7134=m
 CONFIG_SND_SOC_ES7241=m
 CONFIG_SND_SOC_ES8316=m
+CONFIG_SND_SOC_ES8328_I2C=m
 CONFIG_SND_SOC_GTM601=m
 CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
@@ -1037,7 +1116,6 @@ CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
 CONFIG_SND_SOC_TLV320AIC3X_I2C=m
 CONFIG_SND_SOC_WCD9335=m
 CONFIG_SND_SOC_WCD934X=m
-CONFIG_SND_SOC_WCD939X=m
 CONFIG_SND_SOC_WCD939X_SDW=m
 CONFIG_SND_SOC_WM8524=m
 CONFIG_SND_SOC_WM8904=m
@@ -1064,6 +1142,7 @@ CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_PCI_RENESAS=m
 CONFIG_USB_XHCI_RZV2M=y
+CONFIG_USB_XHCI_SIDEBAND=y
 CONFIG_USB_XHCI_TEGRA=y
 CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y
@@ -1120,6 +1199,9 @@ CONFIG_USB_MASS_STORAGE=m
 CONFIG_TYPEC=m
 CONFIG_TYPEC_TCPM=m
 CONFIG_TYPEC_TCPCI=m
+CONFIG_TYPEC_RT1711H=m
+CONFIG_TYPEC_MT6360=m
+CONFIG_TYPEC_TCPCI_MAXIM=m
 CONFIG_TYPEC_FUSB302=m
 CONFIG_TYPEC_QCOM_PMIC=m
 CONFIG_TYPEC_UCSI=m
@@ -1129,7 +1211,10 @@ CONFIG_TYPEC_TPS6598X=m
 CONFIG_TYPEC_HD3SS3220=m
 CONFIG_TYPEC_MUX_FSA4480=m
 CONFIG_TYPEC_MUX_GPIO_SBU=m
+CONFIG_TYPEC_MUX_IT5205=m
 CONFIG_TYPEC_MUX_NB7VPQ904M=m
+CONFIG_TYPEC_MUX_PS883X=m
+CONFIG_TYPEC_MUX_PTN36502=m
 CONFIG_TYPEC_MUX_WCD939X_USBSS=m
 CONFIG_TYPEC_DP_ALTMODE=m
 CONFIG_MMC=y
@@ -1167,18 +1252,24 @@ CONFIG_SCSI_UFS_BSG=y
 CONFIG_SCSI_UFSHCD_PLATFORM=y
 CONFIG_SCSI_UFS_CDNS_PLATFORM=m
 CONFIG_SCSI_UFS_QCOM=m
+CONFIG_SCSI_UFS_MEDIATEK=y
 CONFIG_SCSI_UFS_HISI=y
 CONFIG_SCSI_UFS_RENESAS=m
 CONFIG_SCSI_UFS_TI_J721E=m
 CONFIG_SCSI_UFS_EXYNOS=y
+CONFIG_SCSI_UFS_ROCKCHIP=y
+CONFIG_BLK_INLINE_ENCRYPTION=y
+CONFIG_SCSI_UFS_CRYPTO=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_CLASS_MULTICOLOR=m
 CONFIG_LEDS_LM3692X=m
 CONFIG_LEDS_PCA9532=m
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_QCOM_FLASH=m
 CONFIG_LEDS_QCOM_LPG=m
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_DISK=y
@@ -1203,6 +1294,7 @@ CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_RX8581=m
 CONFIG_RTC_DRV_RV3028=m
 CONFIG_RTC_DRV_RV8803=m
+CONFIG_RTC_DRV_S32G=m
 CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_PCF2127=m
@@ -1223,6 +1315,7 @@ CONFIG_RTC_DRV_MT6397=m
 CONFIG_RTC_DRV_XGENE=y
 CONFIG_RTC_DRV_TI_K3=m
 CONFIG_RTC_DRV_RENESAS_RTCA3=m
+CONFIG_RTC_DRV_NVIDIA_VRS10=m
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_SUN6I=m
@@ -1236,6 +1329,7 @@ CONFIG_PL330_DMA=y
 CONFIG_TEGRA186_GPC_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_TEGRA210_ADMA=m
+CONFIG_MTK_UART_APDMA=m
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_GPI_DMA=m
 CONFIG_QCOM_HIDMA_MGMT=y
@@ -1246,6 +1340,7 @@ CONFIG_RENESAS_USB_DMAC=m
 CONFIG_RZ_DMAC=y
 CONFIG_TI_K3_UDMA=y
 CONFIG_TI_K3_UDMA_GLUE_LAYER=y
+CONFIG_STM32_DMA3=m
 CONFIG_VFIO=y
 CONFIG_VFIO_PCI=y
 CONFIG_VIRTIO_PCI=y
@@ -1253,6 +1348,8 @@ CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_XEN_GNTDEV=y
 CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_GREYBUS=m
+CONFIG_GREYBUS_BEAGLEPLAY=m
 CONFIG_STAGING=y
 CONFIG_STAGING_MEDIA=y
 CONFIG_VIDEO_MAX96712=m
@@ -1272,11 +1369,12 @@ CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_RP1=m
 CONFIG_COMMON_CLK_RS9_PCIE=y
 CONFIG_COMMON_CLK_VC3=y
 CONFIG_COMMON_CLK_VC5=y
 CONFIG_COMMON_CLK_BD718XX=m
-CONFIG_CLK_RASPBERRYPI=m
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MN=y
 CONFIG_CLK_IMX8MP=y
@@ -1284,6 +1382,7 @@ CONFIG_CLK_IMX8MQ=y
 CONFIG_CLK_IMX8QXP=y
 CONFIG_CLK_IMX8ULP=y
 CONFIG_CLK_IMX93=y
+CONFIG_CLK_IMX95_BLK_CTL=y
 CONFIG_TI_SCI_CLK=y
 CONFIG_COMMON_CLK_MT8192_AUDSYS=y
 CONFIG_COMMON_CLK_MT8192_CAMSYS=y
@@ -1303,6 +1402,8 @@ CONFIG_CLK_X1E80100_DISPCC=m
 CONFIG_CLK_X1E80100_GCC=y
 CONFIG_CLK_X1E80100_GPUCC=m
 CONFIG_CLK_X1E80100_TCSRCC=y
+CONFIG_CLK_X1P42100_GPUCC=m
+CONFIG_CLK_QCM2290_GPUCC=m
 CONFIG_QCOM_A53PLL=y
 CONFIG_QCOM_CLK_APCS_MSM8916=y
 CONFIG_QCOM_CLK_APCC_MSM8996=y
@@ -1310,12 +1411,17 @@ CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_QCOM_CLK_RPMH=y
 CONFIG_IPQ_APSS_6018=y
 CONFIG_IPQ_APSS_5018=y
+CONFIG_IPQ_CMN_PLL=m
 CONFIG_IPQ_GCC_5018=y
 CONFIG_IPQ_GCC_5332=y
+CONFIG_IPQ_GCC_5424=y
 CONFIG_IPQ_GCC_6018=y
 CONFIG_IPQ_GCC_8074=y
 CONFIG_IPQ_GCC_9574=y
+CONFIG_IPQ_NSSCC_5424=m
+CONFIG_IPQ_NSSCC_9574=m
 CONFIG_MSM_GCC_8916=y
+CONFIG_MSM_GCC_8953=y
 CONFIG_MSM_MMCC_8994=m
 CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_GCC_8996=y
@@ -1324,12 +1430,20 @@ CONFIG_MSM_GCC_8998=y
 CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
+CONFIG_QCS_DISPCC_615=m
+CONFIG_QCS_CAMCC_615=m
 CONFIG_QCS_GCC_404=y
+CONFIG_QCS_GCC_615=y
+CONFIG_QCS_GCC_8300=y
 CONFIG_SC_CAMCC_7280=m
+CONFIG_SA_CAMCC_8775P=m
+CONFIG_QCS_GPUCC_615=m
+CONFIG_QCS_VIDEOCC_615=m
 CONFIG_QDU_GCC_1000=y
 CONFIG_SC_CAMCC_8280XP=m
 CONFIG_SC_DISPCC_7280=m
 CONFIG_SC_DISPCC_8280XP=m
+CONFIG_SA_DISPCC_8775P=m
 CONFIG_SA_GCC_8775P=y
 CONFIG_SA_GPUCC_8775P=m
 CONFIG_SC_GCC_7180=y
@@ -1347,19 +1461,26 @@ CONFIG_SDM_VIDEOCC_845=y
 CONFIG_SDM_DISPCC_845=y
 CONFIG_SDM_LPASSCC_845=m
 CONFIG_SDX_GCC_75=y
+CONFIG_SM_CAMCC_6350=m
 CONFIG_SM_CAMCC_8250=m
+CONFIG_SM_CAMCC_8550=m
+CONFIG_SM_CAMCC_8650=m
 CONFIG_SM_DISPCC_6115=m
 CONFIG_SM_DISPCC_8250=y
+CONFIG_SM_DISPCC_6350=m
 CONFIG_SM_DISPCC_8450=m
 CONFIG_SM_DISPCC_8550=m
-CONFIG_SM_DISPCC_8650=m
+CONFIG_SM_DISPCC_8750=m
 CONFIG_SM_GCC_4450=y
 CONFIG_SM_GCC_6115=y
+CONFIG_SM_GCC_6350=y
 CONFIG_SM_GCC_8350=y
 CONFIG_SM_GCC_8450=y
 CONFIG_SM_GCC_8550=y
 CONFIG_SM_GCC_8650=y
+CONFIG_SM_GCC_8750=y
 CONFIG_SM_GPUCC_6115=m
+CONFIG_SM_GPUCC_6350=m
 CONFIG_SM_GPUCC_8150=y
 CONFIG_SM_GPUCC_8250=y
 CONFIG_SM_GPUCC_8350=m
@@ -1368,23 +1489,36 @@ CONFIG_SM_GPUCC_8550=m
 CONFIG_SM_GPUCC_8650=m
 CONFIG_SM_TCSRCC_8550=y
 CONFIG_SM_TCSRCC_8650=y
+CONFIG_SM_TCSRCC_8750=m
+CONFIG_SA_VIDEOCC_8775P=m
+CONFIG_SM_VIDEOCC_6350=m
 CONFIG_SM_VIDEOCC_8250=y
+CONFIG_SM_VIDEOCC_8550=m
 CONFIG_QCOM_HFPLL=y
 CONFIG_CLK_GFM_LPASS_SM8250=m
+CONFIG_SM_VIDEOCC_8450=m
 CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
 CONFIG_CLK_RENESAS_VBATTB=m
+CONFIG_EXYNOS_ACPM_CLK=m
+CONFIG_CLK_SOPHGO_CV1800=y
 CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_OMAP=m
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_TEGRA186_TIMER=y
+CONFIG_CLKSRC_STM32_LP=y
 CONFIG_RENESAS_OSTM=y
 CONFIG_ARM_MHU=y
+CONFIG_EXYNOS_MBOX=m
 CONFIG_IMX_MBOX=y
 CONFIG_OMAP2PLUS_MBOX=m
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_QCOM_APCS_IPC=y
 CONFIG_MTK_ADSP_MBOX=m
+CONFIG_QCOM_CPUCP_MBOX=m
+CONFIG_TEGRA_HSP_MBOX=y
 CONFIG_QCOM_IPCC=y
+CONFIG_CIX_MBOX=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_ARM_SMMU=y
@@ -1400,6 +1534,7 @@ CONFIG_QCOM_Q6V5_PAS=m
 CONFIG_QCOM_SYSMON=m
 CONFIG_QCOM_WCNSS_PIL=m
 CONFIG_TI_K3_DSP_REMOTEPROC=m
+CONFIG_TI_K3_M4_REMOTEPROC=m
 CONFIG_TI_K3_R5_REMOTEPROC=m
 CONFIG_RPMSG_CHAR=m
 CONFIG_RPMSG_CTRL=m
@@ -1435,34 +1570,14 @@ CONFIG_QCOM_WCNSS_CTRL=m
 CONFIG_QCOM_APR=m
 CONFIG_QCOM_ICC_BWMON=m
 CONFIG_QCOM_PBS=m
-CONFIG_ARCH_R8A77995=y
-CONFIG_ARCH_R8A77990=y
-CONFIG_ARCH_R8A77951=y
-CONFIG_ARCH_R8A77965=y
-CONFIG_ARCH_R8A77960=y
-CONFIG_ARCH_R8A77961=y
-CONFIG_ARCH_R8A779F0=y
-CONFIG_ARCH_R8A77980=y
-CONFIG_ARCH_R8A77970=y
-CONFIG_ARCH_R8A779A0=y
-CONFIG_ARCH_R8A779G0=y
-CONFIG_ARCH_R8A779H0=y
-CONFIG_ARCH_R8A774C0=y
-CONFIG_ARCH_R8A774E1=y
-CONFIG_ARCH_R8A774A1=y
-CONFIG_ARCH_R8A774B1=y
-CONFIG_ARCH_R9A07G043=y
-CONFIG_ARCH_R9A07G044=y
-CONFIG_ARCH_R9A07G054=y
-CONFIG_ARCH_R9A08G045=y
-CONFIG_ARCH_R9A09G011=y
-CONFIG_ARCH_R9A09G057=y
 CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_ARCH_TEGRA_186_SOC=y
 CONFIG_ARCH_TEGRA_194_SOC=y
 CONFIG_ARCH_TEGRA_234_SOC=y
+CONFIG_ARCH_TEGRA_241_SOC=y
+CONFIG_ARCH_TEGRA_264_SOC=y
 CONFIG_TI_PRUSS=m
 CONFIG_OWL_PM_DOMAINS=y
 CONFIG_RASPBERRYPI_POWER=y
@@ -1475,21 +1590,27 @@ CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_ARM_IMX_BUS_DEVFREQ=y
 CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
 CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
+CONFIG_PM_DEVFREQ_EVENT=y
+CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m
 CONFIG_EXTCON_PTN5150=m
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_EXTCON_USBC_CROS_EC=y
 CONFIG_FSL_IFC=y
 CONFIG_RENESAS_RPCIF=m
+CONFIG_STM32_OMM=m
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
 CONFIG_IMX8QXP_ADC=m
 CONFIG_IMX93_ADC=m
 CONFIG_MAX9611=m
+CONFIG_MEDIATEK_MT6359_AUXADC=m
 CONFIG_MEDIATEK_MT6577_AUXADC=m
 CONFIG_QCOM_SPMI_VADC=m
 CONFIG_QCOM_SPMI_ADC5=m
 CONFIG_ROCKCHIP_SARADC=m
 CONFIG_RZG2L_ADC=m
+CONFIG_RZT2H_ADC=m
+CONFIG_SOPHGO_CV1800B_ADC=m
 CONFIG_TI_ADS1015=m
 CONFIG_TI_AM335X_ADC=m
 CONFIG_IIO_CROS_EC_SENSORS_CORE=m
@@ -1499,6 +1620,7 @@ CONFIG_IIO_CROS_EC_LIGHT_PROX=m
 CONFIG_SENSORS_ISL29018=m
 CONFIG_VCNL4000=m
 CONFIG_IIO_ST_MAGN_3AXIS=m
+CONFIG_IIO_STM32_TIMER_TRIGGER=m
 CONFIG_IIO_CROS_EC_BARO=m
 CONFIG_MPL3115=m
 CONFIG_PWM=y
@@ -1510,12 +1632,14 @@ CONFIG_PWM_IMX27=m
 CONFIG_PWM_MESON=m
 CONFIG_PWM_MTK_DISP=m
 CONFIG_PWM_MEDIATEK=m
-CONFIG_PWM_RCAR=m
+CONFIG_PWM_RENESAS_RCAR=m
+CONFIG_PWM_RENESAS_RZG2L_GPT=m
+CONFIG_PWM_RENESAS_RZ_MTU3=m
 CONFIG_PWM_RENESAS_TPU=m
 CONFIG_PWM_ROCKCHIP=y
-CONFIG_PWM_RZ_MTU3=m
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PWM_SL28CPLD=m
+CONFIG_PWM_STM32=m
 CONFIG_PWM_SUN4I=m
 CONFIG_PWM_TEGRA=m
 CONFIG_PWM_TIECAP=m
@@ -1524,16 +1648,22 @@ CONFIG_PWM_VISCONTI=m
 CONFIG_SL28CPLD_INTC=y
 CONFIG_QCOM_PDC=y
 CONFIG_QCOM_MPM=y
+CONFIG_TI_SCI_INTR_IRQCHIP=y
+CONFIG_TI_SCI_INTA_IRQCHIP=y
 CONFIG_RESET_GPIO=m
 CONFIG_RESET_IMX7=y
 CONFIG_RESET_QCOM_AOSS=y
 CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_RZG2L_USBPHY_CTRL=y
+CONFIG_RESET_RZV2H_USB2PHY=m
 CONFIG_RESET_TI_SCI=y
+CONFIG_PHY_SNPS_EUSB2=m
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_CAN_TRANSCEIVER=m
+CONFIG_PHY_NXP_PTN3222=m
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_CADENCE_TORRENT=m
+CONFIG_PHY_CADENCE_DPHY=m
 CONFIG_PHY_CADENCE_DPHY_RX=m
 CONFIG_PHY_CADENCE_SIERRA=m
 CONFIG_PHY_CADENCE_SALVO=m
@@ -1543,14 +1673,18 @@ CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_HISTB_COMBPHY=y
 CONFIG_PHY_HISI_INNO_USB2=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_MTK_PCIE=m
 CONFIG_PHY_MTK_TPHY=y
+CONFIG_PHY_MTK_HDMI=m
+CONFIG_PHY_MTK_MIPI_DSI=m
+CONFIG_PHY_MTK_DP=m
 CONFIG_PHY_QCOM_EDP=m
 CONFIG_PHY_QCOM_PCIE2=m
 CONFIG_PHY_QCOM_QMP=m
 CONFIG_PHY_QCOM_QUSB2=m
-CONFIG_PHY_QCOM_SNPS_EUSB2=m
 CONFIG_PHY_QCOM_EUSB2_REPEATER=m
 CONFIG_PHY_QCOM_M31_USB=m
+CONFIG_PHY_QCOM_M31_EUSB=m
 CONFIG_PHY_QCOM_USB_HS=m
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
 CONFIG_PHY_QCOM_USB_HS_28NM=m
@@ -1613,6 +1747,7 @@ CONFIG_FPGA_BRIDGE=m
 CONFIG_ALTERA_FREEZE_BRIDGE=m
 CONFIG_FPGA_REGION=m
 CONFIG_OF_FPGA_REGION=m
+CONFIG_OF_OVERLAY=y
 CONFIG_TEE=y
 CONFIG_OPTEE=y
 CONFIG_MUX_GPIO=m
@@ -1628,10 +1763,13 @@ CONFIG_INTERCONNECT_IMX8MQ=m
 CONFIG_INTERCONNECT_IMX8MP=y
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=m
+CONFIG_INTERCONNECT_QCOM_MSM8953=y
 CONFIG_INTERCONNECT_QCOM_MSM8996=y
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
 CONFIG_INTERCONNECT_QCOM_QCM2290=y
 CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_QCS615=y
+CONFIG_INTERCONNECT_QCOM_QCS8300=y
 CONFIG_INTERCONNECT_QCOM_QDU1000=y
 CONFIG_INTERCONNECT_QCOM_SA8775P=y
 CONFIG_INTERCONNECT_QCOM_SC7180=y
@@ -1641,15 +1779,19 @@ CONFIG_INTERCONNECT_QCOM_SC8280XP=y
 CONFIG_INTERCONNECT_QCOM_SDM845=y
 CONFIG_INTERCONNECT_QCOM_SDX75=y
 CONFIG_INTERCONNECT_QCOM_SM6115=y
+CONFIG_INTERCONNECT_QCOM_SM6350=y
 CONFIG_INTERCONNECT_QCOM_SM8150=y
 CONFIG_INTERCONNECT_QCOM_SM8250=y
 CONFIG_INTERCONNECT_QCOM_SM8350=y
 CONFIG_INTERCONNECT_QCOM_SM8450=y
 CONFIG_INTERCONNECT_QCOM_SM8550=y
 CONFIG_INTERCONNECT_QCOM_SM8650=y
+CONFIG_INTERCONNECT_QCOM_SM8750=y
 CONFIG_INTERCONNECT_QCOM_X1E80100=y
 CONFIG_COUNTER=m
+CONFIG_TI_EQEP=m
 CONFIG_RZ_MTU3_CNT=m
+CONFIG_STM32_TIMER_CNT=m
 CONFIG_HTE=y
 CONFIG_HTE_TEGRA194=y
 CONFIG_HTE_TEGRA194_TEST=m
@@ -1683,22 +1825,17 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_USER=y
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CHACHA20=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_USER_API_RNG=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_SHA512_ARM64_CE=m
-CONFIG_CRYPTO_SHA3_ARM64=m
 CONFIG_CRYPTO_SM3_ARM64_CE=m
 CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
 CONFIG_CRYPTO_AES_ARM64_BS=m
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
 CONFIG_CRYPTO_DEV_SUN8I_CE=m
 CONFIG_CRYPTO_DEV_FSL_CAAM=m
 CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=m
diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
index e7d9bd8e4709..bdd276a6e540 100644
--- a/arch/arm64/crypto/Kconfig
+++ b/arch/arm64/crypto/Kconfig
@@ -25,82 +25,11 @@ config CRYPTO_NHPOLY1305_NEON
 	  Architecture: arm64 using:
 	  - NEON (Advanced SIMD) extensions
 
-config CRYPTO_POLY1305_NEON
-	tristate "Hash functions: Poly1305 (NEON)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_HASH
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-	help
-	  Poly1305 authenticator algorithm (RFC7539)
-
-	  Architecture: arm64 using:
-	  - NEON (Advanced SIMD) extensions
-
-config CRYPTO_SHA1_ARM64_CE
-	tristate "Hash functions: SHA-1 (ARMv8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_HASH
-	select CRYPTO_SHA1
-	help
-	  SHA-1 secure hash algorithm (FIPS 180)
-
-	  Architecture: arm64 using:
-	  - ARMv8 Crypto Extensions
-
-config CRYPTO_SHA256_ARM64
-	tristate "Hash functions: SHA-224 and SHA-256"
-	select CRYPTO_HASH
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm64
-
-config CRYPTO_SHA2_ARM64_CE
-	tristate "Hash functions: SHA-224 and SHA-256 (ARMv8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_HASH
-	select CRYPTO_SHA256_ARM64
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm64 using:
-	  - ARMv8 Crypto Extensions
-
-config CRYPTO_SHA512_ARM64
-	tristate "Hash functions: SHA-384 and SHA-512"
-	select CRYPTO_HASH
-	help
-	  SHA-384 and SHA-512 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm64
-
-config CRYPTO_SHA512_ARM64_CE
-	tristate "Hash functions: SHA-384 and SHA-512 (ARMv8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_HASH
-	select CRYPTO_SHA512_ARM64
-	help
-	  SHA-384 and SHA-512 secure hash algorithms (FIPS 180)
-
-	  Architecture: arm64 using:
-	  - ARMv8 Crypto Extensions
-
-config CRYPTO_SHA3_ARM64
-	tristate "Hash functions: SHA-3 (ARMv8.2 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_HASH
-	select CRYPTO_SHA3
-	help
-	  SHA-3 secure hash algorithms (FIPS 202)
-
-	  Architecture: arm64 using:
-	  - ARMv8.2 Crypto Extensions
-
 config CRYPTO_SM3_NEON
 	tristate "Hash functions: SM3 (NEON)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_HASH
-	select CRYPTO_SM3
+	select CRYPTO_LIB_SM3
 	help
 	  SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012)
 
@@ -111,26 +40,17 @@ config CRYPTO_SM3_ARM64_CE
 	tristate "Hash functions: SM3 (ARMv8.2 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_HASH
-	select CRYPTO_SM3
+	select CRYPTO_LIB_SM3
 	help
 	  SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012)
 
 	  Architecture: arm64 using:
 	  - ARMv8.2 Crypto Extensions
 
-config CRYPTO_POLYVAL_ARM64_CE
-	tristate "Hash functions: POLYVAL (ARMv8 Crypto Extensions)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_POLYVAL
-	help
-	  POLYVAL hash function for HCTR2
-
-	  Architecture: arm64 using:
-	  - ARMv8 Crypto Extensions
-
 config CRYPTO_AES_ARM64
 	tristate "Ciphers: AES, modes: ECB, CBC, CTR, CTS, XCTR, XTS"
 	select CRYPTO_AES
+	select CRYPTO_LIB_SHA256
 	help
 	  Block ciphers: AES cipher algorithms (FIPS-197)
 	  Length-preserving ciphers: AES with ECB, CBC, CTR, CTS,
@@ -142,7 +62,7 @@ config CRYPTO_AES_ARM64
 
 config CRYPTO_AES_ARM64_CE
 	tristate "Ciphers: AES (ARMv8 Crypto Extensions)"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on KERNEL_MODE_NEON
 	select CRYPTO_ALGAPI
 	select CRYPTO_LIB_AES
 	help
@@ -185,19 +105,6 @@ config CRYPTO_AES_ARM64_NEON_BLK
 	  Architecture: arm64 using:
 	  - NEON (Advanced SIMD) extensions
 
-config CRYPTO_CHACHA20_NEON
-	tristate "Ciphers: ChaCha (NEON)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_SKCIPHER
-	select CRYPTO_LIB_CHACHA_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-	help
-	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
-	  stream cipher algorithms
-
-	  Architecture: arm64 using:
-	  - NEON (Advanced SIMD) extensions
-
 config CRYPTO_AES_ARM64_BS
 	tristate "Ciphers: AES, modes: ECB/CBC/CTR/XCTR/XTS modes (bit-sliced NEON)"
 	depends on KERNEL_MODE_NEON
@@ -265,7 +172,7 @@ config CRYPTO_SM4_ARM64_NEON_BLK
 
 config CRYPTO_AES_ARM64_CE_CCM
 	tristate "AEAD cipher: AES in CCM mode (ARMv8 Crypto Extensions)"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on KERNEL_MODE_NEON
 	select CRYPTO_ALGAPI
 	select CRYPTO_AES_ARM64_CE
 	select CRYPTO_AES_ARM64_CE_BLK
@@ -312,15 +219,5 @@ config CRYPTO_SM4_ARM64_CE_GCM
 	  - PMULL (Polynomial Multiply Long) instructions
 	  - NEON (Advanced SIMD) extensions
 
-config CRYPTO_CRCT10DIF_ARM64_CE
-	tristate "CRCT10DIF (PMULL)"
-	depends on KERNEL_MODE_NEON && CRC_T10DIF
-	select CRYPTO_HASH
-	help
-	  CRC16 CRC algorithm used for the T10 (SCSI) Data Integrity Field (DIF)
-
-	  Architecture: arm64 using
-	  - PMULL (Polynomial Multiply Long) instructions
-
 endmenu
 
diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile
index fbe64dce66e0..1e330aa08d3f 100644
--- a/arch/arm64/crypto/Makefile
+++ b/arch/arm64/crypto/Makefile
@@ -5,18 +5,6 @@
 # Copyright (C) 2014 Linaro Ltd <ard.biesheuvel@linaro.org>
 #
 
-obj-$(CONFIG_CRYPTO_SHA1_ARM64_CE) += sha1-ce.o
-sha1-ce-y := sha1-ce-glue.o sha1-ce-core.o
-
-obj-$(CONFIG_CRYPTO_SHA2_ARM64_CE) += sha2-ce.o
-sha2-ce-y := sha2-ce-glue.o sha2-ce-core.o
-
-obj-$(CONFIG_CRYPTO_SHA512_ARM64_CE) += sha512-ce.o
-sha512-ce-y := sha512-ce-glue.o sha512-ce-core.o
-
-obj-$(CONFIG_CRYPTO_SHA3_ARM64) += sha3-ce.o
-sha3-ce-y := sha3-ce-glue.o sha3-ce-core.o
-
 obj-$(CONFIG_CRYPTO_SM3_NEON) += sm3-neon.o
 sm3-neon-y := sm3-neon-glue.o sm3-neon-core.o
 
@@ -41,12 +29,6 @@ sm4-neon-y := sm4-neon-glue.o sm4-neon-core.o
 obj-$(CONFIG_CRYPTO_GHASH_ARM64_CE) += ghash-ce.o
 ghash-ce-y := ghash-ce-glue.o ghash-ce-core.o
 
-obj-$(CONFIG_CRYPTO_POLYVAL_ARM64_CE) += polyval-ce.o
-polyval-ce-y := polyval-ce-glue.o polyval-ce-core.o
-
-obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM64_CE) += crct10dif-ce.o
-crct10dif-ce-y := crct10dif-ce-core.o crct10dif-ce-glue.o
-
 obj-$(CONFIG_CRYPTO_AES_ARM64_CE) += aes-ce-cipher.o
 aes-ce-cipher-y := aes-ce-core.o aes-ce-glue.o
 
@@ -59,19 +41,6 @@ aes-ce-blk-y := aes-glue-ce.o aes-ce.o
 obj-$(CONFIG_CRYPTO_AES_ARM64_NEON_BLK) += aes-neon-blk.o
 aes-neon-blk-y := aes-glue-neon.o aes-neon.o
 
-obj-$(CONFIG_CRYPTO_SHA256_ARM64) += sha256-arm64.o
-sha256-arm64-y := sha256-glue.o sha256-core.o
-
-obj-$(CONFIG_CRYPTO_SHA512_ARM64) += sha512-arm64.o
-sha512-arm64-y := sha512-glue.o sha512-core.o
-
-obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
-chacha-neon-y := chacha-neon-core.o chacha-neon-glue.o
-
-obj-$(CONFIG_CRYPTO_POLY1305_NEON) += poly1305-neon.o
-poly1305-neon-y := poly1305-core.o poly1305-glue.o
-AFLAGS_poly1305-core.o += -Dpoly1305_init=poly1305_init_arm64
-
 obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
 nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
 
@@ -80,14 +49,3 @@ aes-arm64-y := aes-cipher-core.o aes-cipher-glue.o
 
 obj-$(CONFIG_CRYPTO_AES_ARM64_BS) += aes-neon-bs.o
 aes-neon-bs-y := aes-neonbs-core.o aes-neonbs-glue.o
-
-quiet_cmd_perlasm = PERLASM $@
-      cmd_perlasm = $(PERL) $(<) void $(@)
-
-$(obj)/%-core.S: $(src)/%-armv8.pl
-	$(call cmd,perlasm)
-
-$(obj)/sha256-core.S: $(src)/sha512-armv8.pl
-	$(call cmd,perlasm)
-
-clean-files += poly1305-core.S sha256-core.S sha512-core.S
diff --git a/arch/arm64/crypto/aes-ce-ccm-glue.c b/arch/arm64/crypto/aes-ce-ccm-glue.c
index a523b519700f..c4fd648471f1 100644
--- a/arch/arm64/crypto/aes-ce-ccm-glue.c
+++ b/arch/arm64/crypto/aes-ce-ccm-glue.c
@@ -8,7 +8,6 @@
  * Author: Ard Biesheuvel <ardb@kernel.org>
  */
 
-#include <asm/neon.h>
 #include <linux/unaligned.h>
 #include <crypto/aes.h>
 #include <crypto/scatterwalk.h>
@@ -16,9 +15,11 @@
 #include <crypto/internal/skcipher.h>
 #include <linux/module.h>
 
+#include <asm/simd.h>
+
 #include "aes-ce-setkey.h"
 
-MODULE_IMPORT_NS(CRYPTO_INTERNAL);
+MODULE_IMPORT_NS("CRYPTO_INTERNAL");
 
 static int num_rounds(struct crypto_aes_ctx *ctx)
 {
@@ -114,11 +115,8 @@ static u32 ce_aes_ccm_auth_data(u8 mac[], u8 const in[], u32 abytes,
 			in += adv;
 			abytes -= adv;
 
-			if (unlikely(rem)) {
-				kernel_neon_end();
-				kernel_neon_begin();
+			if (unlikely(rem))
 				macp = 0;
-			}
 		} else {
 			u32 l = min(AES_BLOCK_SIZE - macp, abytes);
 
@@ -156,23 +154,13 @@ static void ccm_calculate_auth_mac(struct aead_request *req, u8 mac[])
 	scatterwalk_start(&walk, req->src);
 
 	do {
-		u32 n = scatterwalk_clamp(&walk, len);
-		u8 *p;
-
-		if (!n) {
-			scatterwalk_start(&walk, sg_next(walk.sg));
-			n = scatterwalk_clamp(&walk, len);
-		}
-		p = scatterwalk_map(&walk);
-
-		macp = ce_aes_ccm_auth_data(mac, p, n, macp, ctx->key_enc,
-					    num_rounds(ctx));
+		unsigned int n;
 
+		n = scatterwalk_next(&walk, len);
+		macp = ce_aes_ccm_auth_data(mac, walk.addr, n, macp,
+					    ctx->key_enc, num_rounds(ctx));
+		scatterwalk_done_src(&walk, n);
 		len -= n;
-
-		scatterwalk_unmap(p);
-		scatterwalk_advance(&walk, n);
-		scatterwalk_done(&walk, 0, len);
 	} while (len);
 }
 
@@ -197,40 +185,38 @@ static int ccm_encrypt(struct aead_request *req)
 	if (unlikely(err))
 		return err;
 
-	kernel_neon_begin();
+	scoped_ksimd() {
+		if (req->assoclen)
+			ccm_calculate_auth_mac(req, mac);
 
-	if (req->assoclen)
-		ccm_calculate_auth_mac(req, mac);
+		do {
+			u32 tail = walk.nbytes % AES_BLOCK_SIZE;
+			const u8 *src = walk.src.virt.addr;
+			u8 *dst = walk.dst.virt.addr;
+			u8 buf[AES_BLOCK_SIZE];
+			u8 *final_iv = NULL;
 
-	do {
-		u32 tail = walk.nbytes % AES_BLOCK_SIZE;
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		u8 buf[AES_BLOCK_SIZE];
-		u8 *final_iv = NULL;
-
-		if (walk.nbytes == walk.total) {
-			tail = 0;
-			final_iv = orig_iv;
-		}
-
-		if (unlikely(walk.nbytes < AES_BLOCK_SIZE))
-			src = dst = memcpy(&buf[sizeof(buf) - walk.nbytes],
-					   src, walk.nbytes);
+			if (walk.nbytes == walk.total) {
+				tail = 0;
+				final_iv = orig_iv;
+			}
 
-		ce_aes_ccm_encrypt(dst, src, walk.nbytes - tail,
-				   ctx->key_enc, num_rounds(ctx),
-				   mac, walk.iv, final_iv);
+			if (unlikely(walk.nbytes < AES_BLOCK_SIZE))
+				src = dst = memcpy(&buf[sizeof(buf) - walk.nbytes],
+						   src, walk.nbytes);
 
-		if (unlikely(walk.nbytes < AES_BLOCK_SIZE))
-			memcpy(walk.dst.virt.addr, dst, walk.nbytes);
+			ce_aes_ccm_encrypt(dst, src, walk.nbytes - tail,
+					   ctx->key_enc, num_rounds(ctx),
+					   mac, walk.iv, final_iv);
 
-		if (walk.nbytes) {
-			err = skcipher_walk_done(&walk, tail);
-		}
-	} while (walk.nbytes);
+			if (unlikely(walk.nbytes < AES_BLOCK_SIZE))
+				memcpy(walk.dst.virt.addr, dst, walk.nbytes);
 
-	kernel_neon_end();
+			if (walk.nbytes) {
+				err = skcipher_walk_done(&walk, tail);
+			}
+		} while (walk.nbytes);
+	}
 
 	if (unlikely(err))
 		return err;
@@ -264,40 +250,38 @@ static int ccm_decrypt(struct aead_request *req)
 	if (unlikely(err))
 		return err;
 
-	kernel_neon_begin();
+	scoped_ksimd() {
+		if (req->assoclen)
+			ccm_calculate_auth_mac(req, mac);
 
-	if (req->assoclen)
-		ccm_calculate_auth_mac(req, mac);
+		do {
+			u32 tail = walk.nbytes % AES_BLOCK_SIZE;
+			const u8 *src = walk.src.virt.addr;
+			u8 *dst = walk.dst.virt.addr;
+			u8 buf[AES_BLOCK_SIZE];
+			u8 *final_iv = NULL;
 
-	do {
-		u32 tail = walk.nbytes % AES_BLOCK_SIZE;
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		u8 buf[AES_BLOCK_SIZE];
-		u8 *final_iv = NULL;
-
-		if (walk.nbytes == walk.total) {
-			tail = 0;
-			final_iv = orig_iv;
-		}
-
-		if (unlikely(walk.nbytes < AES_BLOCK_SIZE))
-			src = dst = memcpy(&buf[sizeof(buf) - walk.nbytes],
-					   src, walk.nbytes);
+			if (walk.nbytes == walk.total) {
+				tail = 0;
+				final_iv = orig_iv;
+			}
 
-		ce_aes_ccm_decrypt(dst, src, walk.nbytes - tail,
-				   ctx->key_enc, num_rounds(ctx),
-				   mac, walk.iv, final_iv);
+			if (unlikely(walk.nbytes < AES_BLOCK_SIZE))
+				src = dst = memcpy(&buf[sizeof(buf) - walk.nbytes],
+						   src, walk.nbytes);
 
-		if (unlikely(walk.nbytes < AES_BLOCK_SIZE))
-			memcpy(walk.dst.virt.addr, dst, walk.nbytes);
+			ce_aes_ccm_decrypt(dst, src, walk.nbytes - tail,
+					   ctx->key_enc, num_rounds(ctx),
+					   mac, walk.iv, final_iv);
 
-		if (walk.nbytes) {
-			err = skcipher_walk_done(&walk, tail);
-		}
-	} while (walk.nbytes);
+			if (unlikely(walk.nbytes < AES_BLOCK_SIZE))
+				memcpy(walk.dst.virt.addr, dst, walk.nbytes);
 
-	kernel_neon_end();
+			if (walk.nbytes) {
+				err = skcipher_walk_done(&walk, tail);
+			}
+		} while (walk.nbytes);
+	}
 
 	if (unlikely(err))
 		return err;
diff --git a/arch/arm64/crypto/aes-ce-glue.c b/arch/arm64/crypto/aes-ce-glue.c
index 00b8749013c5..a4dad370991d 100644
--- a/arch/arm64/crypto/aes-ce-glue.c
+++ b/arch/arm64/crypto/aes-ce-glue.c
@@ -52,9 +52,8 @@ static void aes_cipher_encrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
 		return;
 	}
 
-	kernel_neon_begin();
-	__aes_ce_encrypt(ctx->key_enc, dst, src, num_rounds(ctx));
-	kernel_neon_end();
+	scoped_ksimd()
+		__aes_ce_encrypt(ctx->key_enc, dst, src, num_rounds(ctx));
 }
 
 static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
@@ -66,9 +65,8 @@ static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
 		return;
 	}
 
-	kernel_neon_begin();
-	__aes_ce_decrypt(ctx->key_dec, dst, src, num_rounds(ctx));
-	kernel_neon_end();
+	scoped_ksimd()
+		__aes_ce_decrypt(ctx->key_dec, dst, src, num_rounds(ctx));
 }
 
 int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
@@ -94,47 +92,48 @@ int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
 	for (i = 0; i < kwords; i++)
 		ctx->key_enc[i] = get_unaligned_le32(in_key + i * sizeof(u32));
 
-	kernel_neon_begin();
-	for (i = 0; i < sizeof(rcon); i++) {
-		u32 *rki = ctx->key_enc + (i * kwords);
-		u32 *rko = rki + kwords;
-
-		rko[0] = ror32(__aes_ce_sub(rki[kwords - 1]), 8) ^ rcon[i] ^ rki[0];
-		rko[1] = rko[0] ^ rki[1];
-		rko[2] = rko[1] ^ rki[2];
-		rko[3] = rko[2] ^ rki[3];
-
-		if (key_len == AES_KEYSIZE_192) {
-			if (i >= 7)
-				break;
-			rko[4] = rko[3] ^ rki[4];
-			rko[5] = rko[4] ^ rki[5];
-		} else if (key_len == AES_KEYSIZE_256) {
-			if (i >= 6)
-				break;
-			rko[4] = __aes_ce_sub(rko[3]) ^ rki[4];
-			rko[5] = rko[4] ^ rki[5];
-			rko[6] = rko[5] ^ rki[6];
-			rko[7] = rko[6] ^ rki[7];
+	scoped_ksimd() {
+		for (i = 0; i < sizeof(rcon); i++) {
+			u32 *rki = ctx->key_enc + (i * kwords);
+			u32 *rko = rki + kwords;
+
+			rko[0] = ror32(__aes_ce_sub(rki[kwords - 1]), 8) ^
+				 rcon[i] ^ rki[0];
+			rko[1] = rko[0] ^ rki[1];
+			rko[2] = rko[1] ^ rki[2];
+			rko[3] = rko[2] ^ rki[3];
+
+			if (key_len == AES_KEYSIZE_192) {
+				if (i >= 7)
+					break;
+				rko[4] = rko[3] ^ rki[4];
+				rko[5] = rko[4] ^ rki[5];
+			} else if (key_len == AES_KEYSIZE_256) {
+				if (i >= 6)
+					break;
+				rko[4] = __aes_ce_sub(rko[3]) ^ rki[4];
+				rko[5] = rko[4] ^ rki[5];
+				rko[6] = rko[5] ^ rki[6];
+				rko[7] = rko[6] ^ rki[7];
+			}
 		}
-	}
 
-	/*
-	 * Generate the decryption keys for the Equivalent Inverse Cipher.
-	 * This involves reversing the order of the round keys, and applying
-	 * the Inverse Mix Columns transformation on all but the first and
-	 * the last one.
-	 */
-	key_enc = (struct aes_block *)ctx->key_enc;
-	key_dec = (struct aes_block *)ctx->key_dec;
-	j = num_rounds(ctx);
-
-	key_dec[0] = key_enc[j];
-	for (i = 1, j--; j > 0; i++, j--)
-		__aes_ce_invert(key_dec + i, key_enc + j);
-	key_dec[i] = key_enc[0];
+		/*
+		 * Generate the decryption keys for the Equivalent Inverse
+		 * Cipher.  This involves reversing the order of the round
+		 * keys, and applying the Inverse Mix Columns transformation on
+		 * all but the first and the last one.
+		 */
+		key_enc = (struct aes_block *)ctx->key_enc;
+		key_dec = (struct aes_block *)ctx->key_dec;
+		j = num_rounds(ctx);
+
+		key_dec[0] = key_enc[j];
+		for (i = 1, j--; j > 0; i++, j--)
+			__aes_ce_invert(key_dec + i, key_enc + j);
+		key_dec[i] = key_enc[0];
+	}
 
-	kernel_neon_end();
 	return 0;
 }
 EXPORT_SYMBOL(ce_aes_expandkey);
diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c
index a147e847a5a1..b087b900d279 100644
--- a/arch/arm64/crypto/aes-glue.c
+++ b/arch/arm64/crypto/aes-glue.c
@@ -5,19 +5,21 @@
  * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
  */
 
-#include <asm/neon.h>
-#include <asm/hwcap.h>
-#include <asm/simd.h>
 #include <crypto/aes.h>
 #include <crypto/ctr.h>
-#include <crypto/sha2.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
-#include <linux/module.h>
-#include <linux/cpufeature.h>
+#include <crypto/sha2.h>
+#include <crypto/utils.h>
 #include <crypto/xts.h>
+#include <linux/cpufeature.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include <asm/hwcap.h>
+#include <asm/simd.h>
 
 #include "aes-ce-setkey.h"
 
@@ -121,7 +123,6 @@ struct crypto_aes_xts_ctx {
 struct crypto_aes_essiv_cbc_ctx {
 	struct crypto_aes_ctx key1;
 	struct crypto_aes_ctx __aligned(8) key2;
-	struct crypto_shash *hash;
 };
 
 struct mac_tfm_ctx {
@@ -130,7 +131,6 @@ struct mac_tfm_ctx {
 };
 
 struct mac_desc_ctx {
-	unsigned int len;
 	u8 dg[AES_BLOCK_SIZE];
 };
 
@@ -171,7 +171,7 @@ static int __maybe_unused essiv_cbc_set_key(struct crypto_skcipher *tfm,
 	if (ret)
 		return ret;
 
-	crypto_shash_tfm_digest(ctx->hash, in_key, key_len, digest);
+	sha256(in_key, key_len, digest);
 
 	return aes_expandkey(&ctx->key2, digest, sizeof(digest));
 }
@@ -187,10 +187,9 @@ static int __maybe_unused ecb_encrypt(struct skcipher_request *req)
 	err = skcipher_walk_virt(&walk, req, false);
 
 	while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) {
-		kernel_neon_begin();
-		aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				ctx->key_enc, rounds, blocks);
-		kernel_neon_end();
+		scoped_ksimd()
+			aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+					ctx->key_enc, rounds, blocks);
 		err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
@@ -207,10 +206,9 @@ static int __maybe_unused ecb_decrypt(struct skcipher_request *req)
 	err = skcipher_walk_virt(&walk, req, false);
 
 	while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) {
-		kernel_neon_begin();
-		aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				ctx->key_dec, rounds, blocks);
-		kernel_neon_end();
+		scoped_ksimd()
+			aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+					ctx->key_dec, rounds, blocks);
 		err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
@@ -225,10 +223,9 @@ static int cbc_encrypt_walk(struct skcipher_request *req,
 	unsigned int blocks;
 
 	while ((blocks = (walk->nbytes / AES_BLOCK_SIZE))) {
-		kernel_neon_begin();
-		aes_cbc_encrypt(walk->dst.virt.addr, walk->src.virt.addr,
-				ctx->key_enc, rounds, blocks, walk->iv);
-		kernel_neon_end();
+		scoped_ksimd()
+			aes_cbc_encrypt(walk->dst.virt.addr, walk->src.virt.addr,
+					ctx->key_enc, rounds, blocks, walk->iv);
 		err = skcipher_walk_done(walk, walk->nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
@@ -254,10 +251,9 @@ static int cbc_decrypt_walk(struct skcipher_request *req,
 	unsigned int blocks;
 
 	while ((blocks = (walk->nbytes / AES_BLOCK_SIZE))) {
-		kernel_neon_begin();
-		aes_cbc_decrypt(walk->dst.virt.addr, walk->src.virt.addr,
-				ctx->key_dec, rounds, blocks, walk->iv);
-		kernel_neon_end();
+		scoped_ksimd()
+			aes_cbc_decrypt(walk->dst.virt.addr, walk->src.virt.addr,
+					ctx->key_dec, rounds, blocks, walk->iv);
 		err = skcipher_walk_done(walk, walk->nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
@@ -323,10 +319,9 @@ static int cts_cbc_encrypt(struct skcipher_request *req)
 	if (err)
 		return err;
 
-	kernel_neon_begin();
-	aes_cbc_cts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
-			    ctx->key_enc, rounds, walk.nbytes, walk.iv);
-	kernel_neon_end();
+	scoped_ksimd()
+		aes_cbc_cts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				    ctx->key_enc, rounds, walk.nbytes, walk.iv);
 
 	return skcipher_walk_done(&walk, 0);
 }
@@ -380,30 +375,13 @@ static int cts_cbc_decrypt(struct skcipher_request *req)
 	if (err)
 		return err;
 
-	kernel_neon_begin();
-	aes_cbc_cts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
-			    ctx->key_dec, rounds, walk.nbytes, walk.iv);
-	kernel_neon_end();
+	scoped_ksimd()
+		aes_cbc_cts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				    ctx->key_dec, rounds, walk.nbytes, walk.iv);
 
 	return skcipher_walk_done(&walk, 0);
 }
 
-static int __maybe_unused essiv_cbc_init_tfm(struct crypto_skcipher *tfm)
-{
-	struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	ctx->hash = crypto_alloc_shash("sha256", 0, 0);
-
-	return PTR_ERR_OR_ZERO(ctx->hash);
-}
-
-static void __maybe_unused essiv_cbc_exit_tfm(struct crypto_skcipher *tfm)
-{
-	struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	crypto_free_shash(ctx->hash);
-}
-
 static int __maybe_unused essiv_cbc_encrypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -416,11 +394,11 @@ static int __maybe_unused essiv_cbc_encrypt(struct skcipher_request *req)
 
 	blocks = walk.nbytes / AES_BLOCK_SIZE;
 	if (blocks) {
-		kernel_neon_begin();
-		aes_essiv_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				      ctx->key1.key_enc, rounds, blocks,
-				      req->iv, ctx->key2.key_enc);
-		kernel_neon_end();
+		scoped_ksimd()
+			aes_essiv_cbc_encrypt(walk.dst.virt.addr,
+					      walk.src.virt.addr,
+					      ctx->key1.key_enc, rounds, blocks,
+					      req->iv, ctx->key2.key_enc);
 		err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err ?: cbc_encrypt_walk(req, &walk);
@@ -438,11 +416,11 @@ static int __maybe_unused essiv_cbc_decrypt(struct skcipher_request *req)
 
 	blocks = walk.nbytes / AES_BLOCK_SIZE;
 	if (blocks) {
-		kernel_neon_begin();
-		aes_essiv_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				      ctx->key1.key_dec, rounds, blocks,
-				      req->iv, ctx->key2.key_enc);
-		kernel_neon_end();
+		scoped_ksimd()
+			aes_essiv_cbc_decrypt(walk.dst.virt.addr,
+					      walk.src.virt.addr,
+					      ctx->key1.key_dec, rounds, blocks,
+					      req->iv, ctx->key2.key_enc);
 		err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err ?: cbc_decrypt_walk(req, &walk);
@@ -478,10 +456,9 @@ static int __maybe_unused xctr_encrypt(struct skcipher_request *req)
 		else if (nbytes < walk.total)
 			nbytes &= ~(AES_BLOCK_SIZE - 1);
 
-		kernel_neon_begin();
-		aes_xctr_encrypt(dst, src, ctx->key_enc, rounds, nbytes,
-						 walk.iv, byte_ctr);
-		kernel_neon_end();
+		scoped_ksimd()
+			aes_xctr_encrypt(dst, src, ctx->key_enc, rounds, nbytes,
+							 walk.iv, byte_ctr);
 
 		if (unlikely(nbytes < AES_BLOCK_SIZE))
 			memcpy(walk.dst.virt.addr,
@@ -523,10 +500,9 @@ static int __maybe_unused ctr_encrypt(struct skcipher_request *req)
 		else if (nbytes < walk.total)
 			nbytes &= ~(AES_BLOCK_SIZE - 1);
 
-		kernel_neon_begin();
-		aes_ctr_encrypt(dst, src, ctx->key_enc, rounds, nbytes,
-				walk.iv);
-		kernel_neon_end();
+		scoped_ksimd()
+			aes_ctr_encrypt(dst, src, ctx->key_enc, rounds, nbytes,
+					walk.iv);
 
 		if (unlikely(nbytes < AES_BLOCK_SIZE))
 			memcpy(walk.dst.virt.addr,
@@ -579,11 +555,10 @@ static int __maybe_unused xts_encrypt(struct skcipher_request *req)
 		if (walk.nbytes < walk.total)
 			nbytes &= ~(AES_BLOCK_SIZE - 1);
 
-		kernel_neon_begin();
-		aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				ctx->key1.key_enc, rounds, nbytes,
-				ctx->key2.key_enc, walk.iv, first);
-		kernel_neon_end();
+		scoped_ksimd()
+			aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+					ctx->key1.key_enc, rounds, nbytes,
+					ctx->key2.key_enc, walk.iv, first);
 		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
 	}
 
@@ -601,11 +576,10 @@ static int __maybe_unused xts_encrypt(struct skcipher_request *req)
 	if (err)
 		return err;
 
-	kernel_neon_begin();
-	aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
-			ctx->key1.key_enc, rounds, walk.nbytes,
-			ctx->key2.key_enc, walk.iv, first);
-	kernel_neon_end();
+	scoped_ksimd()
+		aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				ctx->key1.key_enc, rounds, walk.nbytes,
+				ctx->key2.key_enc, walk.iv, first);
 
 	return skcipher_walk_done(&walk, 0);
 }
@@ -651,11 +625,10 @@ static int __maybe_unused xts_decrypt(struct skcipher_request *req)
 		if (walk.nbytes < walk.total)
 			nbytes &= ~(AES_BLOCK_SIZE - 1);
 
-		kernel_neon_begin();
-		aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				ctx->key1.key_dec, rounds, nbytes,
-				ctx->key2.key_enc, walk.iv, first);
-		kernel_neon_end();
+		scoped_ksimd()
+			aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+					ctx->key1.key_dec, rounds, nbytes,
+					ctx->key2.key_enc, walk.iv, first);
 		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
 	}
 
@@ -674,11 +647,10 @@ static int __maybe_unused xts_decrypt(struct skcipher_request *req)
 		return err;
 
 
-	kernel_neon_begin();
-	aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
-			ctx->key1.key_dec, rounds, walk.nbytes,
-			ctx->key2.key_enc, walk.iv, first);
-	kernel_neon_end();
+	scoped_ksimd()
+		aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				ctx->key1.key_dec, rounds, walk.nbytes,
+				ctx->key2.key_enc, walk.iv, first);
 
 	return skcipher_walk_done(&walk, 0);
 }
@@ -793,8 +765,6 @@ static struct skcipher_alg aes_algs[] = { {
 	.setkey		= essiv_cbc_set_key,
 	.encrypt	= essiv_cbc_encrypt,
 	.decrypt	= essiv_cbc_decrypt,
-	.init		= essiv_cbc_init_tfm,
-	.exit		= essiv_cbc_exit_tfm,
 } };
 
 static int cbcmac_setkey(struct crypto_shash *tfm, const u8 *in_key,
@@ -827,10 +797,9 @@ static int cmac_setkey(struct crypto_shash *tfm, const u8 *in_key,
 		return err;
 
 	/* encrypt the zero vector */
-	kernel_neon_begin();
-	aes_ecb_encrypt(ctx->consts, (u8[AES_BLOCK_SIZE]){}, ctx->key.key_enc,
-			rounds, 1);
-	kernel_neon_end();
+	scoped_ksimd()
+		aes_ecb_encrypt(ctx->consts, (u8[AES_BLOCK_SIZE]){},
+				ctx->key.key_enc, rounds, 1);
 
 	cmac_gf128_mul_by_x(consts, consts);
 	cmac_gf128_mul_by_x(consts + 1, consts);
@@ -856,10 +825,10 @@ static int xcbc_setkey(struct crypto_shash *tfm, const u8 *in_key,
 	if (err)
 		return err;
 
-	kernel_neon_begin();
-	aes_ecb_encrypt(key, ks[0], ctx->key.key_enc, rounds, 1);
-	aes_ecb_encrypt(ctx->consts, ks[1], ctx->key.key_enc, rounds, 2);
-	kernel_neon_end();
+	scoped_ksimd() {
+		aes_ecb_encrypt(key, ks[0], ctx->key.key_enc, rounds, 1);
+		aes_ecb_encrypt(ctx->consts, ks[1], ctx->key.key_enc, rounds, 2);
+	}
 
 	return cbcmac_setkey(tfm, key, sizeof(key));
 }
@@ -869,109 +838,63 @@ static int mac_init(struct shash_desc *desc)
 	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
 
 	memset(ctx->dg, 0, AES_BLOCK_SIZE);
-	ctx->len = 0;
-
 	return 0;
 }
 
 static void mac_do_update(struct crypto_aes_ctx *ctx, u8 const in[], int blocks,
-			  u8 dg[], int enc_before, int enc_after)
+			  u8 dg[], int enc_before)
 {
 	int rounds = 6 + ctx->key_length / 4;
+	int rem;
 
-	if (crypto_simd_usable()) {
-		int rem;
-
-		do {
-			kernel_neon_begin();
+	do {
+		scoped_ksimd()
 			rem = aes_mac_update(in, ctx->key_enc, rounds, blocks,
-					     dg, enc_before, enc_after);
-			kernel_neon_end();
-			in += (blocks - rem) * AES_BLOCK_SIZE;
-			blocks = rem;
-			enc_before = 0;
-		} while (blocks);
-	} else {
-		if (enc_before)
-			aes_encrypt(ctx, dg, dg);
-
-		while (blocks--) {
-			crypto_xor(dg, in, AES_BLOCK_SIZE);
-			in += AES_BLOCK_SIZE;
-
-			if (blocks || enc_after)
-				aes_encrypt(ctx, dg, dg);
-		}
-	}
+					     dg, enc_before, !enc_before);
+		in += (blocks - rem) * AES_BLOCK_SIZE;
+		blocks = rem;
+	} while (blocks);
 }
 
 static int mac_update(struct shash_desc *desc, const u8 *p, unsigned int len)
 {
 	struct mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
+	int blocks = len / AES_BLOCK_SIZE;
 
-	while (len > 0) {
-		unsigned int l;
-
-		if ((ctx->len % AES_BLOCK_SIZE) == 0 &&
-		    (ctx->len + len) > AES_BLOCK_SIZE) {
-
-			int blocks = len / AES_BLOCK_SIZE;
-
-			len %= AES_BLOCK_SIZE;
-
-			mac_do_update(&tctx->key, p, blocks, ctx->dg,
-				      (ctx->len != 0), (len != 0));
-
-			p += blocks * AES_BLOCK_SIZE;
-
-			if (!len) {
-				ctx->len = AES_BLOCK_SIZE;
-				break;
-			}
-			ctx->len = 0;
-		}
-
-		l = min(len, AES_BLOCK_SIZE - ctx->len);
-
-		if (l <= AES_BLOCK_SIZE) {
-			crypto_xor(ctx->dg + ctx->len, p, l);
-			ctx->len += l;
-			len -= l;
-			p += l;
-		}
-	}
-
-	return 0;
+	len %= AES_BLOCK_SIZE;
+	mac_do_update(&tctx->key, p, blocks, ctx->dg, 0);
+	return len;
 }
 
-static int cbcmac_final(struct shash_desc *desc, u8 *out)
+static int cbcmac_finup(struct shash_desc *desc, const u8 *src,
+			unsigned int len, u8 *out)
 {
 	struct mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	mac_do_update(&tctx->key, NULL, 0, ctx->dg, (ctx->len != 0), 0);
-
+	if (len) {
+		crypto_xor(ctx->dg, src, len);
+		mac_do_update(&tctx->key, NULL, 0, ctx->dg, 1);
+	}
 	memcpy(out, ctx->dg, AES_BLOCK_SIZE);
-
 	return 0;
 }
 
-static int cmac_final(struct shash_desc *desc, u8 *out)
+static int cmac_finup(struct shash_desc *desc, const u8 *src, unsigned int len,
+		      u8 *out)
 {
 	struct mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
 	u8 *consts = tctx->consts;
 
-	if (ctx->len != AES_BLOCK_SIZE) {
-		ctx->dg[ctx->len] ^= 0x80;
+	crypto_xor(ctx->dg, src, len);
+	if (len != AES_BLOCK_SIZE) {
+		ctx->dg[len] ^= 0x80;
 		consts += AES_BLOCK_SIZE;
 	}
-
-	mac_do_update(&tctx->key, consts, 1, ctx->dg, 0, 1);
-
+	mac_do_update(&tctx->key, consts, 1, ctx->dg, 0);
 	memcpy(out, ctx->dg, AES_BLOCK_SIZE);
-
 	return 0;
 }
 
@@ -979,6 +902,8 @@ static struct shash_alg mac_algs[] = { {
 	.base.cra_name		= "cmac(aes)",
 	.base.cra_driver_name	= "cmac-aes-" MODE,
 	.base.cra_priority	= PRIO,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINAL_NONZERO,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct mac_tfm_ctx) +
 				  2 * AES_BLOCK_SIZE,
@@ -987,13 +912,15 @@ static struct shash_alg mac_algs[] = { {
 	.digestsize		= AES_BLOCK_SIZE,
 	.init			= mac_init,
 	.update			= mac_update,
-	.final			= cmac_final,
+	.finup			= cmac_finup,
 	.setkey			= cmac_setkey,
 	.descsize		= sizeof(struct mac_desc_ctx),
 }, {
 	.base.cra_name		= "xcbc(aes)",
 	.base.cra_driver_name	= "xcbc-aes-" MODE,
 	.base.cra_priority	= PRIO,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINAL_NONZERO,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct mac_tfm_ctx) +
 				  2 * AES_BLOCK_SIZE,
@@ -1002,21 +929,22 @@ static struct shash_alg mac_algs[] = { {
 	.digestsize		= AES_BLOCK_SIZE,
 	.init			= mac_init,
 	.update			= mac_update,
-	.final			= cmac_final,
+	.finup			= cmac_finup,
 	.setkey			= xcbc_setkey,
 	.descsize		= sizeof(struct mac_desc_ctx),
 }, {
 	.base.cra_name		= "cbcmac(aes)",
 	.base.cra_driver_name	= "cbcmac-aes-" MODE,
 	.base.cra_priority	= PRIO,
-	.base.cra_blocksize	= 1,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
+	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct mac_tfm_ctx),
 	.base.cra_module	= THIS_MODULE,
 
 	.digestsize		= AES_BLOCK_SIZE,
 	.init			= mac_init,
 	.update			= mac_update,
-	.final			= cbcmac_final,
+	.finup			= cbcmac_finup,
 	.setkey			= cbcmac_setkey,
 	.descsize		= sizeof(struct mac_desc_ctx),
 } };
@@ -1048,7 +976,7 @@ unregister_ciphers:
 
 #ifdef USE_V8_CRYPTO_EXTENSIONS
 module_cpu_feature_match(AES, aes_init);
-EXPORT_SYMBOL_NS(ce_aes_mac_update, CRYPTO_INTERNAL);
+EXPORT_SYMBOL_NS(ce_aes_mac_update, "CRYPTO_INTERNAL");
 #else
 module_init(aes_init);
 EXPORT_SYMBOL(neon_aes_ecb_encrypt);
diff --git a/arch/arm64/crypto/aes-neonbs-glue.c b/arch/arm64/crypto/aes-neonbs-glue.c
index 46425e7b9755..d496effb0a5b 100644
--- a/arch/arm64/crypto/aes-neonbs-glue.c
+++ b/arch/arm64/crypto/aes-neonbs-glue.c
@@ -85,9 +85,8 @@ static int aesbs_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 
 	ctx->rounds = 6 + key_len / 4;
 
-	kernel_neon_begin();
-	aesbs_convert_key(ctx->rk, rk.key_enc, ctx->rounds);
-	kernel_neon_end();
+	scoped_ksimd()
+		aesbs_convert_key(ctx->rk, rk.key_enc, ctx->rounds);
 
 	return 0;
 }
@@ -110,10 +109,9 @@ static int __ecb_crypt(struct skcipher_request *req,
 			blocks = round_down(blocks,
 					    walk.stride / AES_BLOCK_SIZE);
 
-		kernel_neon_begin();
-		fn(walk.dst.virt.addr, walk.src.virt.addr, ctx->rk,
-		   ctx->rounds, blocks);
-		kernel_neon_end();
+		scoped_ksimd()
+			fn(walk.dst.virt.addr, walk.src.virt.addr, ctx->rk,
+			   ctx->rounds, blocks);
 		err = skcipher_walk_done(&walk,
 					 walk.nbytes - blocks * AES_BLOCK_SIZE);
 	}
@@ -146,9 +144,8 @@ static int aesbs_cbc_ctr_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 
 	memcpy(ctx->enc, rk.key_enc, sizeof(ctx->enc));
 
-	kernel_neon_begin();
-	aesbs_convert_key(ctx->key.rk, rk.key_enc, ctx->key.rounds);
-	kernel_neon_end();
+	scoped_ksimd()
+		aesbs_convert_key(ctx->key.rk, rk.key_enc, ctx->key.rounds);
 	memzero_explicit(&rk, sizeof(rk));
 
 	return 0;
@@ -167,11 +164,11 @@ static int cbc_encrypt(struct skcipher_request *req)
 		unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
 
 		/* fall back to the non-bitsliced NEON implementation */
-		kernel_neon_begin();
-		neon_aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				     ctx->enc, ctx->key.rounds, blocks,
-				     walk.iv);
-		kernel_neon_end();
+		scoped_ksimd()
+			neon_aes_cbc_encrypt(walk.dst.virt.addr,
+					     walk.src.virt.addr,
+					     ctx->enc, ctx->key.rounds, blocks,
+					     walk.iv);
 		err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
@@ -193,11 +190,10 @@ static int cbc_decrypt(struct skcipher_request *req)
 			blocks = round_down(blocks,
 					    walk.stride / AES_BLOCK_SIZE);
 
-		kernel_neon_begin();
-		aesbs_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				  ctx->key.rk, ctx->key.rounds, blocks,
-				  walk.iv);
-		kernel_neon_end();
+		scoped_ksimd()
+			aesbs_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+					  ctx->key.rk, ctx->key.rounds, blocks,
+					  walk.iv);
 		err = skcipher_walk_done(&walk,
 					 walk.nbytes - blocks * AES_BLOCK_SIZE);
 	}
@@ -220,30 +216,32 @@ static int ctr_encrypt(struct skcipher_request *req)
 		const u8 *src = walk.src.virt.addr;
 		u8 *dst = walk.dst.virt.addr;
 
-		kernel_neon_begin();
-		if (blocks >= 8) {
-			aesbs_ctr_encrypt(dst, src, ctx->key.rk, ctx->key.rounds,
-					  blocks, walk.iv);
-			dst += blocks * AES_BLOCK_SIZE;
-			src += blocks * AES_BLOCK_SIZE;
-		}
-		if (nbytes && walk.nbytes == walk.total) {
-			u8 buf[AES_BLOCK_SIZE];
-			u8 *d = dst;
-
-			if (unlikely(nbytes < AES_BLOCK_SIZE))
-				src = dst = memcpy(buf + sizeof(buf) - nbytes,
-						   src, nbytes);
-
-			neon_aes_ctr_encrypt(dst, src, ctx->enc, ctx->key.rounds,
-					     nbytes, walk.iv);
+		scoped_ksimd() {
+			if (blocks >= 8) {
+				aesbs_ctr_encrypt(dst, src, ctx->key.rk,
+						  ctx->key.rounds, blocks,
+						  walk.iv);
+				dst += blocks * AES_BLOCK_SIZE;
+				src += blocks * AES_BLOCK_SIZE;
+			}
+			if (nbytes && walk.nbytes == walk.total) {
+				u8 buf[AES_BLOCK_SIZE];
+				u8 *d = dst;
+
+				if (unlikely(nbytes < AES_BLOCK_SIZE))
+					src = dst = memcpy(buf + sizeof(buf) -
+							   nbytes, src, nbytes);
+
+				neon_aes_ctr_encrypt(dst, src, ctx->enc,
+						     ctx->key.rounds, nbytes,
+						     walk.iv);
 
-			if (unlikely(nbytes < AES_BLOCK_SIZE))
-				memcpy(d, dst, nbytes);
+				if (unlikely(nbytes < AES_BLOCK_SIZE))
+					memcpy(d, dst, nbytes);
 
-			nbytes = 0;
+				nbytes = 0;
+			}
 		}
-		kernel_neon_end();
 		err = skcipher_walk_done(&walk, nbytes);
 	}
 	return err;
@@ -287,7 +285,8 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 	struct skcipher_walk walk;
 	int nbytes, err;
 	int first = 1;
-	u8 *out, *in;
+	const u8 *in;
+	u8 *out;
 
 	if (req->cryptlen < AES_BLOCK_SIZE)
 		return -EINVAL;
@@ -319,33 +318,33 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 		in = walk.src.virt.addr;
 		nbytes = walk.nbytes;
 
-		kernel_neon_begin();
-		if (blocks >= 8) {
-			if (first == 1)
-				neon_aes_ecb_encrypt(walk.iv, walk.iv,
-						     ctx->twkey,
-						     ctx->key.rounds, 1);
-			first = 2;
-
-			fn(out, in, ctx->key.rk, ctx->key.rounds, blocks,
-			   walk.iv);
-
-			out += blocks * AES_BLOCK_SIZE;
-			in += blocks * AES_BLOCK_SIZE;
-			nbytes -= blocks * AES_BLOCK_SIZE;
+		scoped_ksimd() {
+			if (blocks >= 8) {
+				if (first == 1)
+					neon_aes_ecb_encrypt(walk.iv, walk.iv,
+							     ctx->twkey,
+							     ctx->key.rounds, 1);
+				first = 2;
+
+				fn(out, in, ctx->key.rk, ctx->key.rounds, blocks,
+				   walk.iv);
+
+				out += blocks * AES_BLOCK_SIZE;
+				in += blocks * AES_BLOCK_SIZE;
+				nbytes -= blocks * AES_BLOCK_SIZE;
+			}
+			if (walk.nbytes == walk.total && nbytes > 0) {
+				if (encrypt)
+					neon_aes_xts_encrypt(out, in, ctx->cts.key_enc,
+							     ctx->key.rounds, nbytes,
+							     ctx->twkey, walk.iv, first);
+				else
+					neon_aes_xts_decrypt(out, in, ctx->cts.key_dec,
+							     ctx->key.rounds, nbytes,
+							     ctx->twkey, walk.iv, first);
+				nbytes = first = 0;
+			}
 		}
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			if (encrypt)
-				neon_aes_xts_encrypt(out, in, ctx->cts.key_enc,
-						     ctx->key.rounds, nbytes,
-						     ctx->twkey, walk.iv, first);
-			else
-				neon_aes_xts_decrypt(out, in, ctx->cts.key_dec,
-						     ctx->key.rounds, nbytes,
-						     ctx->twkey, walk.iv, first);
-			nbytes = first = 0;
-		}
-		kernel_neon_end();
 		err = skcipher_walk_done(&walk, nbytes);
 	}
 
@@ -368,14 +367,16 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 	in = walk.src.virt.addr;
 	nbytes = walk.nbytes;
 
-	kernel_neon_begin();
-	if (encrypt)
-		neon_aes_xts_encrypt(out, in, ctx->cts.key_enc, ctx->key.rounds,
-				     nbytes, ctx->twkey, walk.iv, first);
-	else
-		neon_aes_xts_decrypt(out, in, ctx->cts.key_dec, ctx->key.rounds,
-				     nbytes, ctx->twkey, walk.iv, first);
-	kernel_neon_end();
+	scoped_ksimd() {
+		if (encrypt)
+			neon_aes_xts_encrypt(out, in, ctx->cts.key_enc,
+					     ctx->key.rounds, nbytes, ctx->twkey,
+					     walk.iv, first);
+		else
+			neon_aes_xts_decrypt(out, in, ctx->cts.key_dec,
+					     ctx->key.rounds, nbytes, ctx->twkey,
+					     walk.iv, first);
+	}
 
 	return skcipher_walk_done(&walk, 0);
 }
diff --git a/arch/arm64/crypto/chacha-neon-core.S b/arch/arm64/crypto/chacha-neon-core.S
deleted file mode 100644
index b70ac76f2610..000000000000
--- a/arch/arm64/crypto/chacha-neon-core.S
+++ /dev/null
@@ -1,805 +0,0 @@
-/*
- * ChaCha/XChaCha NEON helper functions
- *
- * Copyright (C) 2016-2018 Linaro, Ltd. <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Originally based on:
- * ChaCha20 256-bit cipher algorithm, RFC7539, x64 SSSE3 functions
- *
- * Copyright (C) 2015 Martin Willi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/cache.h>
-
-	.text
-	.align		6
-
-/*
- * chacha_permute - permute one block
- *
- * Permute one 64-byte block where the state matrix is stored in the four NEON
- * registers v0-v3.  It performs matrix operations on four words in parallel,
- * but requires shuffling to rearrange the words after each round.
- *
- * The round count is given in w3.
- *
- * Clobbers: w3, x10, v4, v12
- */
-SYM_FUNC_START_LOCAL(chacha_permute)
-
-	adr_l		x10, ROT8
-	ld1		{v12.4s}, [x10]
-
-.Ldoubleround:
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 16)
-	add		v0.4s, v0.4s, v1.4s
-	eor		v3.16b, v3.16b, v0.16b
-	rev32		v3.8h, v3.8h
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 12)
-	add		v2.4s, v2.4s, v3.4s
-	eor		v4.16b, v1.16b, v2.16b
-	shl		v1.4s, v4.4s, #12
-	sri		v1.4s, v4.4s, #20
-
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 8)
-	add		v0.4s, v0.4s, v1.4s
-	eor		v3.16b, v3.16b, v0.16b
-	tbl		v3.16b, {v3.16b}, v12.16b
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 7)
-	add		v2.4s, v2.4s, v3.4s
-	eor		v4.16b, v1.16b, v2.16b
-	shl		v1.4s, v4.4s, #7
-	sri		v1.4s, v4.4s, #25
-
-	// x1 = shuffle32(x1, MASK(0, 3, 2, 1))
-	ext		v1.16b, v1.16b, v1.16b, #4
-	// x2 = shuffle32(x2, MASK(1, 0, 3, 2))
-	ext		v2.16b, v2.16b, v2.16b, #8
-	// x3 = shuffle32(x3, MASK(2, 1, 0, 3))
-	ext		v3.16b, v3.16b, v3.16b, #12
-
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 16)
-	add		v0.4s, v0.4s, v1.4s
-	eor		v3.16b, v3.16b, v0.16b
-	rev32		v3.8h, v3.8h
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 12)
-	add		v2.4s, v2.4s, v3.4s
-	eor		v4.16b, v1.16b, v2.16b
-	shl		v1.4s, v4.4s, #12
-	sri		v1.4s, v4.4s, #20
-
-	// x0 += x1, x3 = rotl32(x3 ^ x0, 8)
-	add		v0.4s, v0.4s, v1.4s
-	eor		v3.16b, v3.16b, v0.16b
-	tbl		v3.16b, {v3.16b}, v12.16b
-
-	// x2 += x3, x1 = rotl32(x1 ^ x2, 7)
-	add		v2.4s, v2.4s, v3.4s
-	eor		v4.16b, v1.16b, v2.16b
-	shl		v1.4s, v4.4s, #7
-	sri		v1.4s, v4.4s, #25
-
-	// x1 = shuffle32(x1, MASK(2, 1, 0, 3))
-	ext		v1.16b, v1.16b, v1.16b, #12
-	// x2 = shuffle32(x2, MASK(1, 0, 3, 2))
-	ext		v2.16b, v2.16b, v2.16b, #8
-	// x3 = shuffle32(x3, MASK(0, 3, 2, 1))
-	ext		v3.16b, v3.16b, v3.16b, #4
-
-	subs		w3, w3, #2
-	b.ne		.Ldoubleround
-
-	ret
-SYM_FUNC_END(chacha_permute)
-
-SYM_FUNC_START(chacha_block_xor_neon)
-	// x0: Input state matrix, s
-	// x1: 1 data block output, o
-	// x2: 1 data block input, i
-	// w3: nrounds
-
-	stp		x29, x30, [sp, #-16]!
-	mov		x29, sp
-
-	// x0..3 = s0..3
-	ld1		{v0.4s-v3.4s}, [x0]
-	ld1		{v8.4s-v11.4s}, [x0]
-
-	bl		chacha_permute
-
-	ld1		{v4.16b-v7.16b}, [x2]
-
-	// o0 = i0 ^ (x0 + s0)
-	add		v0.4s, v0.4s, v8.4s
-	eor		v0.16b, v0.16b, v4.16b
-
-	// o1 = i1 ^ (x1 + s1)
-	add		v1.4s, v1.4s, v9.4s
-	eor		v1.16b, v1.16b, v5.16b
-
-	// o2 = i2 ^ (x2 + s2)
-	add		v2.4s, v2.4s, v10.4s
-	eor		v2.16b, v2.16b, v6.16b
-
-	// o3 = i3 ^ (x3 + s3)
-	add		v3.4s, v3.4s, v11.4s
-	eor		v3.16b, v3.16b, v7.16b
-
-	st1		{v0.16b-v3.16b}, [x1]
-
-	ldp		x29, x30, [sp], #16
-	ret
-SYM_FUNC_END(chacha_block_xor_neon)
-
-SYM_FUNC_START(hchacha_block_neon)
-	// x0: Input state matrix, s
-	// x1: output (8 32-bit words)
-	// w2: nrounds
-
-	stp		x29, x30, [sp, #-16]!
-	mov		x29, sp
-
-	ld1		{v0.4s-v3.4s}, [x0]
-
-	mov		w3, w2
-	bl		chacha_permute
-
-	st1		{v0.4s}, [x1], #16
-	st1		{v3.4s}, [x1]
-
-	ldp		x29, x30, [sp], #16
-	ret
-SYM_FUNC_END(hchacha_block_neon)
-
-	a0		.req	w12
-	a1		.req	w13
-	a2		.req	w14
-	a3		.req	w15
-	a4		.req	w16
-	a5		.req	w17
-	a6		.req	w19
-	a7		.req	w20
-	a8		.req	w21
-	a9		.req	w22
-	a10		.req	w23
-	a11		.req	w24
-	a12		.req	w25
-	a13		.req	w26
-	a14		.req	w27
-	a15		.req	w28
-
-	.align		6
-SYM_FUNC_START(chacha_4block_xor_neon)
-	frame_push	10
-
-	// x0: Input state matrix, s
-	// x1: 4 data blocks output, o
-	// x2: 4 data blocks input, i
-	// w3: nrounds
-	// x4: byte count
-
-	adr_l		x10, .Lpermute
-	and		x5, x4, #63
-	add		x10, x10, x5
-
-	//
-	// This function encrypts four consecutive ChaCha blocks by loading
-	// the state matrix in NEON registers four times. The algorithm performs
-	// each operation on the corresponding word of each state matrix, hence
-	// requires no word shuffling. For final XORing step we transpose the
-	// matrix by interleaving 32- and then 64-bit words, which allows us to
-	// do XOR in NEON registers.
-	//
-	// At the same time, a fifth block is encrypted in parallel using
-	// scalar registers
-	//
-	adr_l		x9, CTRINC		// ... and ROT8
-	ld1		{v30.4s-v31.4s}, [x9]
-
-	// x0..15[0-3] = s0..3[0..3]
-	add		x8, x0, #16
-	ld4r		{ v0.4s- v3.4s}, [x0]
-	ld4r		{ v4.4s- v7.4s}, [x8], #16
-	ld4r		{ v8.4s-v11.4s}, [x8], #16
-	ld4r		{v12.4s-v15.4s}, [x8]
-
-	mov		a0, v0.s[0]
-	mov		a1, v1.s[0]
-	mov		a2, v2.s[0]
-	mov		a3, v3.s[0]
-	mov		a4, v4.s[0]
-	mov		a5, v5.s[0]
-	mov		a6, v6.s[0]
-	mov		a7, v7.s[0]
-	mov		a8, v8.s[0]
-	mov		a9, v9.s[0]
-	mov		a10, v10.s[0]
-	mov		a11, v11.s[0]
-	mov		a12, v12.s[0]
-	mov		a13, v13.s[0]
-	mov		a14, v14.s[0]
-	mov		a15, v15.s[0]
-
-	// x12 += counter values 1-4
-	add		v12.4s, v12.4s, v30.4s
-
-.Ldoubleround4:
-	// x0 += x4, x12 = rotl32(x12 ^ x0, 16)
-	// x1 += x5, x13 = rotl32(x13 ^ x1, 16)
-	// x2 += x6, x14 = rotl32(x14 ^ x2, 16)
-	// x3 += x7, x15 = rotl32(x15 ^ x3, 16)
-	add		v0.4s, v0.4s, v4.4s
-	  add		a0, a0, a4
-	add		v1.4s, v1.4s, v5.4s
-	  add		a1, a1, a5
-	add		v2.4s, v2.4s, v6.4s
-	  add		a2, a2, a6
-	add		v3.4s, v3.4s, v7.4s
-	  add		a3, a3, a7
-
-	eor		v12.16b, v12.16b, v0.16b
-	  eor		a12, a12, a0
-	eor		v13.16b, v13.16b, v1.16b
-	  eor		a13, a13, a1
-	eor		v14.16b, v14.16b, v2.16b
-	  eor		a14, a14, a2
-	eor		v15.16b, v15.16b, v3.16b
-	  eor		a15, a15, a3
-
-	rev32		v12.8h, v12.8h
-	  ror		a12, a12, #16
-	rev32		v13.8h, v13.8h
-	  ror		a13, a13, #16
-	rev32		v14.8h, v14.8h
-	  ror		a14, a14, #16
-	rev32		v15.8h, v15.8h
-	  ror		a15, a15, #16
-
-	// x8 += x12, x4 = rotl32(x4 ^ x8, 12)
-	// x9 += x13, x5 = rotl32(x5 ^ x9, 12)
-	// x10 += x14, x6 = rotl32(x6 ^ x10, 12)
-	// x11 += x15, x7 = rotl32(x7 ^ x11, 12)
-	add		v8.4s, v8.4s, v12.4s
-	  add		a8, a8, a12
-	add		v9.4s, v9.4s, v13.4s
-	  add		a9, a9, a13
-	add		v10.4s, v10.4s, v14.4s
-	  add		a10, a10, a14
-	add		v11.4s, v11.4s, v15.4s
-	  add		a11, a11, a15
-
-	eor		v16.16b, v4.16b, v8.16b
-	  eor		a4, a4, a8
-	eor		v17.16b, v5.16b, v9.16b
-	  eor		a5, a5, a9
-	eor		v18.16b, v6.16b, v10.16b
-	  eor		a6, a6, a10
-	eor		v19.16b, v7.16b, v11.16b
-	  eor		a7, a7, a11
-
-	shl		v4.4s, v16.4s, #12
-	shl		v5.4s, v17.4s, #12
-	shl		v6.4s, v18.4s, #12
-	shl		v7.4s, v19.4s, #12
-
-	sri		v4.4s, v16.4s, #20
-	  ror		a4, a4, #20
-	sri		v5.4s, v17.4s, #20
-	  ror		a5, a5, #20
-	sri		v6.4s, v18.4s, #20
-	  ror		a6, a6, #20
-	sri		v7.4s, v19.4s, #20
-	  ror		a7, a7, #20
-
-	// x0 += x4, x12 = rotl32(x12 ^ x0, 8)
-	// x1 += x5, x13 = rotl32(x13 ^ x1, 8)
-	// x2 += x6, x14 = rotl32(x14 ^ x2, 8)
-	// x3 += x7, x15 = rotl32(x15 ^ x3, 8)
-	add		v0.4s, v0.4s, v4.4s
-	  add		a0, a0, a4
-	add		v1.4s, v1.4s, v5.4s
-	  add		a1, a1, a5
-	add		v2.4s, v2.4s, v6.4s
-	  add		a2, a2, a6
-	add		v3.4s, v3.4s, v7.4s
-	  add		a3, a3, a7
-
-	eor		v12.16b, v12.16b, v0.16b
-	  eor		a12, a12, a0
-	eor		v13.16b, v13.16b, v1.16b
-	  eor		a13, a13, a1
-	eor		v14.16b, v14.16b, v2.16b
-	  eor		a14, a14, a2
-	eor		v15.16b, v15.16b, v3.16b
-	  eor		a15, a15, a3
-
-	tbl		v12.16b, {v12.16b}, v31.16b
-	  ror		a12, a12, #24
-	tbl		v13.16b, {v13.16b}, v31.16b
-	  ror		a13, a13, #24
-	tbl		v14.16b, {v14.16b}, v31.16b
-	  ror		a14, a14, #24
-	tbl		v15.16b, {v15.16b}, v31.16b
-	  ror		a15, a15, #24
-
-	// x8 += x12, x4 = rotl32(x4 ^ x8, 7)
-	// x9 += x13, x5 = rotl32(x5 ^ x9, 7)
-	// x10 += x14, x6 = rotl32(x6 ^ x10, 7)
-	// x11 += x15, x7 = rotl32(x7 ^ x11, 7)
-	add		v8.4s, v8.4s, v12.4s
-	  add		a8, a8, a12
-	add		v9.4s, v9.4s, v13.4s
-	  add		a9, a9, a13
-	add		v10.4s, v10.4s, v14.4s
-	  add		a10, a10, a14
-	add		v11.4s, v11.4s, v15.4s
-	  add		a11, a11, a15
-
-	eor		v16.16b, v4.16b, v8.16b
-	  eor		a4, a4, a8
-	eor		v17.16b, v5.16b, v9.16b
-	  eor		a5, a5, a9
-	eor		v18.16b, v6.16b, v10.16b
-	  eor		a6, a6, a10
-	eor		v19.16b, v7.16b, v11.16b
-	  eor		a7, a7, a11
-
-	shl		v4.4s, v16.4s, #7
-	shl		v5.4s, v17.4s, #7
-	shl		v6.4s, v18.4s, #7
-	shl		v7.4s, v19.4s, #7
-
-	sri		v4.4s, v16.4s, #25
-	  ror		a4, a4, #25
-	sri		v5.4s, v17.4s, #25
-	  ror		a5, a5, #25
-	sri		v6.4s, v18.4s, #25
-	 ror		a6, a6, #25
-	sri		v7.4s, v19.4s, #25
-	  ror		a7, a7, #25
-
-	// x0 += x5, x15 = rotl32(x15 ^ x0, 16)
-	// x1 += x6, x12 = rotl32(x12 ^ x1, 16)
-	// x2 += x7, x13 = rotl32(x13 ^ x2, 16)
-	// x3 += x4, x14 = rotl32(x14 ^ x3, 16)
-	add		v0.4s, v0.4s, v5.4s
-	  add		a0, a0, a5
-	add		v1.4s, v1.4s, v6.4s
-	  add		a1, a1, a6
-	add		v2.4s, v2.4s, v7.4s
-	  add		a2, a2, a7
-	add		v3.4s, v3.4s, v4.4s
-	  add		a3, a3, a4
-
-	eor		v15.16b, v15.16b, v0.16b
-	  eor		a15, a15, a0
-	eor		v12.16b, v12.16b, v1.16b
-	  eor		a12, a12, a1
-	eor		v13.16b, v13.16b, v2.16b
-	  eor		a13, a13, a2
-	eor		v14.16b, v14.16b, v3.16b
-	  eor		a14, a14, a3
-
-	rev32		v15.8h, v15.8h
-	  ror		a15, a15, #16
-	rev32		v12.8h, v12.8h
-	  ror		a12, a12, #16
-	rev32		v13.8h, v13.8h
-	  ror		a13, a13, #16
-	rev32		v14.8h, v14.8h
-	  ror		a14, a14, #16
-
-	// x10 += x15, x5 = rotl32(x5 ^ x10, 12)
-	// x11 += x12, x6 = rotl32(x6 ^ x11, 12)
-	// x8 += x13, x7 = rotl32(x7 ^ x8, 12)
-	// x9 += x14, x4 = rotl32(x4 ^ x9, 12)
-	add		v10.4s, v10.4s, v15.4s
-	  add		a10, a10, a15
-	add		v11.4s, v11.4s, v12.4s
-	  add		a11, a11, a12
-	add		v8.4s, v8.4s, v13.4s
-	  add		a8, a8, a13
-	add		v9.4s, v9.4s, v14.4s
-	  add		a9, a9, a14
-
-	eor		v16.16b, v5.16b, v10.16b
-	  eor		a5, a5, a10
-	eor		v17.16b, v6.16b, v11.16b
-	  eor		a6, a6, a11
-	eor		v18.16b, v7.16b, v8.16b
-	  eor		a7, a7, a8
-	eor		v19.16b, v4.16b, v9.16b
-	  eor		a4, a4, a9
-
-	shl		v5.4s, v16.4s, #12
-	shl		v6.4s, v17.4s, #12
-	shl		v7.4s, v18.4s, #12
-	shl		v4.4s, v19.4s, #12
-
-	sri		v5.4s, v16.4s, #20
-	  ror		a5, a5, #20
-	sri		v6.4s, v17.4s, #20
-	  ror		a6, a6, #20
-	sri		v7.4s, v18.4s, #20
-	  ror		a7, a7, #20
-	sri		v4.4s, v19.4s, #20
-	  ror		a4, a4, #20
-
-	// x0 += x5, x15 = rotl32(x15 ^ x0, 8)
-	// x1 += x6, x12 = rotl32(x12 ^ x1, 8)
-	// x2 += x7, x13 = rotl32(x13 ^ x2, 8)
-	// x3 += x4, x14 = rotl32(x14 ^ x3, 8)
-	add		v0.4s, v0.4s, v5.4s
-	  add		a0, a0, a5
-	add		v1.4s, v1.4s, v6.4s
-	  add		a1, a1, a6
-	add		v2.4s, v2.4s, v7.4s
-	  add		a2, a2, a7
-	add		v3.4s, v3.4s, v4.4s
-	  add		a3, a3, a4
-
-	eor		v15.16b, v15.16b, v0.16b
-	  eor		a15, a15, a0
-	eor		v12.16b, v12.16b, v1.16b
-	  eor		a12, a12, a1
-	eor		v13.16b, v13.16b, v2.16b
-	  eor		a13, a13, a2
-	eor		v14.16b, v14.16b, v3.16b
-	  eor		a14, a14, a3
-
-	tbl		v15.16b, {v15.16b}, v31.16b
-	  ror		a15, a15, #24
-	tbl		v12.16b, {v12.16b}, v31.16b
-	  ror		a12, a12, #24
-	tbl		v13.16b, {v13.16b}, v31.16b
-	  ror		a13, a13, #24
-	tbl		v14.16b, {v14.16b}, v31.16b
-	  ror		a14, a14, #24
-
-	// x10 += x15, x5 = rotl32(x5 ^ x10, 7)
-	// x11 += x12, x6 = rotl32(x6 ^ x11, 7)
-	// x8 += x13, x7 = rotl32(x7 ^ x8, 7)
-	// x9 += x14, x4 = rotl32(x4 ^ x9, 7)
-	add		v10.4s, v10.4s, v15.4s
-	  add		a10, a10, a15
-	add		v11.4s, v11.4s, v12.4s
-	  add		a11, a11, a12
-	add		v8.4s, v8.4s, v13.4s
-	  add		a8, a8, a13
-	add		v9.4s, v9.4s, v14.4s
-	  add		a9, a9, a14
-
-	eor		v16.16b, v5.16b, v10.16b
-	  eor		a5, a5, a10
-	eor		v17.16b, v6.16b, v11.16b
-	  eor		a6, a6, a11
-	eor		v18.16b, v7.16b, v8.16b
-	  eor		a7, a7, a8
-	eor		v19.16b, v4.16b, v9.16b
-	  eor		a4, a4, a9
-
-	shl		v5.4s, v16.4s, #7
-	shl		v6.4s, v17.4s, #7
-	shl		v7.4s, v18.4s, #7
-	shl		v4.4s, v19.4s, #7
-
-	sri		v5.4s, v16.4s, #25
-	  ror		a5, a5, #25
-	sri		v6.4s, v17.4s, #25
-	  ror		a6, a6, #25
-	sri		v7.4s, v18.4s, #25
-	  ror		a7, a7, #25
-	sri		v4.4s, v19.4s, #25
-	  ror		a4, a4, #25
-
-	subs		w3, w3, #2
-	b.ne		.Ldoubleround4
-
-	ld4r		{v16.4s-v19.4s}, [x0], #16
-	ld4r		{v20.4s-v23.4s}, [x0], #16
-
-	// x12 += counter values 0-3
-	add		v12.4s, v12.4s, v30.4s
-
-	// x0[0-3] += s0[0]
-	// x1[0-3] += s0[1]
-	// x2[0-3] += s0[2]
-	// x3[0-3] += s0[3]
-	add		v0.4s, v0.4s, v16.4s
-	  mov		w6, v16.s[0]
-	  mov		w7, v17.s[0]
-	add		v1.4s, v1.4s, v17.4s
-	  mov		w8, v18.s[0]
-	  mov		w9, v19.s[0]
-	add		v2.4s, v2.4s, v18.4s
-	  add		a0, a0, w6
-	  add		a1, a1, w7
-	add		v3.4s, v3.4s, v19.4s
-	  add		a2, a2, w8
-	  add		a3, a3, w9
-CPU_BE(	  rev		a0, a0		)
-CPU_BE(	  rev		a1, a1		)
-CPU_BE(	  rev		a2, a2		)
-CPU_BE(	  rev		a3, a3		)
-
-	ld4r		{v24.4s-v27.4s}, [x0], #16
-	ld4r		{v28.4s-v31.4s}, [x0]
-
-	// x4[0-3] += s1[0]
-	// x5[0-3] += s1[1]
-	// x6[0-3] += s1[2]
-	// x7[0-3] += s1[3]
-	add		v4.4s, v4.4s, v20.4s
-	  mov		w6, v20.s[0]
-	  mov		w7, v21.s[0]
-	add		v5.4s, v5.4s, v21.4s
-	  mov		w8, v22.s[0]
-	  mov		w9, v23.s[0]
-	add		v6.4s, v6.4s, v22.4s
-	  add		a4, a4, w6
-	  add		a5, a5, w7
-	add		v7.4s, v7.4s, v23.4s
-	  add		a6, a6, w8
-	  add		a7, a7, w9
-CPU_BE(	  rev		a4, a4		)
-CPU_BE(	  rev		a5, a5		)
-CPU_BE(	  rev		a6, a6		)
-CPU_BE(	  rev		a7, a7		)
-
-	// x8[0-3] += s2[0]
-	// x9[0-3] += s2[1]
-	// x10[0-3] += s2[2]
-	// x11[0-3] += s2[3]
-	add		v8.4s, v8.4s, v24.4s
-	  mov		w6, v24.s[0]
-	  mov		w7, v25.s[0]
-	add		v9.4s, v9.4s, v25.4s
-	  mov		w8, v26.s[0]
-	  mov		w9, v27.s[0]
-	add		v10.4s, v10.4s, v26.4s
-	  add		a8, a8, w6
-	  add		a9, a9, w7
-	add		v11.4s, v11.4s, v27.4s
-	  add		a10, a10, w8
-	  add		a11, a11, w9
-CPU_BE(	  rev		a8, a8		)
-CPU_BE(	  rev		a9, a9		)
-CPU_BE(	  rev		a10, a10	)
-CPU_BE(	  rev		a11, a11	)
-
-	// x12[0-3] += s3[0]
-	// x13[0-3] += s3[1]
-	// x14[0-3] += s3[2]
-	// x15[0-3] += s3[3]
-	add		v12.4s, v12.4s, v28.4s
-	  mov		w6, v28.s[0]
-	  mov		w7, v29.s[0]
-	add		v13.4s, v13.4s, v29.4s
-	  mov		w8, v30.s[0]
-	  mov		w9, v31.s[0]
-	add		v14.4s, v14.4s, v30.4s
-	  add		a12, a12, w6
-	  add		a13, a13, w7
-	add		v15.4s, v15.4s, v31.4s
-	  add		a14, a14, w8
-	  add		a15, a15, w9
-CPU_BE(	  rev		a12, a12	)
-CPU_BE(	  rev		a13, a13	)
-CPU_BE(	  rev		a14, a14	)
-CPU_BE(	  rev		a15, a15	)
-
-	// interleave 32-bit words in state n, n+1
-	  ldp		w6, w7, [x2], #64
-	zip1		v16.4s, v0.4s, v1.4s
-	  ldp		w8, w9, [x2, #-56]
-	  eor		a0, a0, w6
-	zip2		v17.4s, v0.4s, v1.4s
-	  eor		a1, a1, w7
-	zip1		v18.4s, v2.4s, v3.4s
-	  eor		a2, a2, w8
-	zip2		v19.4s, v2.4s, v3.4s
-	  eor		a3, a3, w9
-	  ldp		w6, w7, [x2, #-48]
-	zip1		v20.4s, v4.4s, v5.4s
-	  ldp		w8, w9, [x2, #-40]
-	  eor		a4, a4, w6
-	zip2		v21.4s, v4.4s, v5.4s
-	  eor		a5, a5, w7
-	zip1		v22.4s, v6.4s, v7.4s
-	  eor		a6, a6, w8
-	zip2		v23.4s, v6.4s, v7.4s
-	  eor		a7, a7, w9
-	  ldp		w6, w7, [x2, #-32]
-	zip1		v24.4s, v8.4s, v9.4s
-	  ldp		w8, w9, [x2, #-24]
-	  eor		a8, a8, w6
-	zip2		v25.4s, v8.4s, v9.4s
-	  eor		a9, a9, w7
-	zip1		v26.4s, v10.4s, v11.4s
-	  eor		a10, a10, w8
-	zip2		v27.4s, v10.4s, v11.4s
-	  eor		a11, a11, w9
-	  ldp		w6, w7, [x2, #-16]
-	zip1		v28.4s, v12.4s, v13.4s
-	  ldp		w8, w9, [x2, #-8]
-	  eor		a12, a12, w6
-	zip2		v29.4s, v12.4s, v13.4s
-	  eor		a13, a13, w7
-	zip1		v30.4s, v14.4s, v15.4s
-	  eor		a14, a14, w8
-	zip2		v31.4s, v14.4s, v15.4s
-	  eor		a15, a15, w9
-
-	add		x3, x2, x4
-	sub		x3, x3, #128		// start of last block
-
-	subs		x5, x4, #128
-	csel		x2, x2, x3, ge
-
-	// interleave 64-bit words in state n, n+2
-	zip1		v0.2d, v16.2d, v18.2d
-	zip2		v4.2d, v16.2d, v18.2d
-	  stp		a0, a1, [x1], #64
-	zip1		v8.2d, v17.2d, v19.2d
-	zip2		v12.2d, v17.2d, v19.2d
-	  stp		a2, a3, [x1, #-56]
-
-	subs		x6, x4, #192
-	ld1		{v16.16b-v19.16b}, [x2], #64
-	csel		x2, x2, x3, ge
-
-	zip1		v1.2d, v20.2d, v22.2d
-	zip2		v5.2d, v20.2d, v22.2d
-	  stp		a4, a5, [x1, #-48]
-	zip1		v9.2d, v21.2d, v23.2d
-	zip2		v13.2d, v21.2d, v23.2d
-	  stp		a6, a7, [x1, #-40]
-
-	subs		x7, x4, #256
-	ld1		{v20.16b-v23.16b}, [x2], #64
-	csel		x2, x2, x3, ge
-
-	zip1		v2.2d, v24.2d, v26.2d
-	zip2		v6.2d, v24.2d, v26.2d
-	  stp		a8, a9, [x1, #-32]
-	zip1		v10.2d, v25.2d, v27.2d
-	zip2		v14.2d, v25.2d, v27.2d
-	  stp		a10, a11, [x1, #-24]
-
-	subs		x8, x4, #320
-	ld1		{v24.16b-v27.16b}, [x2], #64
-	csel		x2, x2, x3, ge
-
-	zip1		v3.2d, v28.2d, v30.2d
-	zip2		v7.2d, v28.2d, v30.2d
-	  stp		a12, a13, [x1, #-16]
-	zip1		v11.2d, v29.2d, v31.2d
-	zip2		v15.2d, v29.2d, v31.2d
-	  stp		a14, a15, [x1, #-8]
-
-	tbnz		x5, #63, .Lt128
-	ld1		{v28.16b-v31.16b}, [x2]
-
-	// xor with corresponding input, write to output
-	eor		v16.16b, v16.16b, v0.16b
-	eor		v17.16b, v17.16b, v1.16b
-	eor		v18.16b, v18.16b, v2.16b
-	eor		v19.16b, v19.16b, v3.16b
-
-	tbnz		x6, #63, .Lt192
-
-	eor		v20.16b, v20.16b, v4.16b
-	eor		v21.16b, v21.16b, v5.16b
-	eor		v22.16b, v22.16b, v6.16b
-	eor		v23.16b, v23.16b, v7.16b
-
-	st1		{v16.16b-v19.16b}, [x1], #64
-	tbnz		x7, #63, .Lt256
-
-	eor		v24.16b, v24.16b, v8.16b
-	eor		v25.16b, v25.16b, v9.16b
-	eor		v26.16b, v26.16b, v10.16b
-	eor		v27.16b, v27.16b, v11.16b
-
-	st1		{v20.16b-v23.16b}, [x1], #64
-	tbnz		x8, #63, .Lt320
-
-	eor		v28.16b, v28.16b, v12.16b
-	eor		v29.16b, v29.16b, v13.16b
-	eor		v30.16b, v30.16b, v14.16b
-	eor		v31.16b, v31.16b, v15.16b
-
-	st1		{v24.16b-v27.16b}, [x1], #64
-	st1		{v28.16b-v31.16b}, [x1]
-
-.Lout:	frame_pop
-	ret
-
-	// fewer than 192 bytes of in/output
-.Lt192:	cbz		x5, 1f				// exactly 128 bytes?
-	ld1		{v28.16b-v31.16b}, [x10]
-	add		x5, x5, x1
-	tbl		v28.16b, {v4.16b-v7.16b}, v28.16b
-	tbl		v29.16b, {v4.16b-v7.16b}, v29.16b
-	tbl		v30.16b, {v4.16b-v7.16b}, v30.16b
-	tbl		v31.16b, {v4.16b-v7.16b}, v31.16b
-
-0:	eor		v20.16b, v20.16b, v28.16b
-	eor		v21.16b, v21.16b, v29.16b
-	eor		v22.16b, v22.16b, v30.16b
-	eor		v23.16b, v23.16b, v31.16b
-	st1		{v20.16b-v23.16b}, [x5]		// overlapping stores
-1:	st1		{v16.16b-v19.16b}, [x1]
-	b		.Lout
-
-	// fewer than 128 bytes of in/output
-.Lt128:	ld1		{v28.16b-v31.16b}, [x10]
-	add		x5, x5, x1
-	sub		x1, x1, #64
-	tbl		v28.16b, {v0.16b-v3.16b}, v28.16b
-	tbl		v29.16b, {v0.16b-v3.16b}, v29.16b
-	tbl		v30.16b, {v0.16b-v3.16b}, v30.16b
-	tbl		v31.16b, {v0.16b-v3.16b}, v31.16b
-	ld1		{v16.16b-v19.16b}, [x1]		// reload first output block
-	b		0b
-
-	// fewer than 256 bytes of in/output
-.Lt256:	cbz		x6, 2f				// exactly 192 bytes?
-	ld1		{v4.16b-v7.16b}, [x10]
-	add		x6, x6, x1
-	tbl		v0.16b, {v8.16b-v11.16b}, v4.16b
-	tbl		v1.16b, {v8.16b-v11.16b}, v5.16b
-	tbl		v2.16b, {v8.16b-v11.16b}, v6.16b
-	tbl		v3.16b, {v8.16b-v11.16b}, v7.16b
-
-	eor		v28.16b, v28.16b, v0.16b
-	eor		v29.16b, v29.16b, v1.16b
-	eor		v30.16b, v30.16b, v2.16b
-	eor		v31.16b, v31.16b, v3.16b
-	st1		{v28.16b-v31.16b}, [x6]		// overlapping stores
-2:	st1		{v20.16b-v23.16b}, [x1]
-	b		.Lout
-
-	// fewer than 320 bytes of in/output
-.Lt320:	cbz		x7, 3f				// exactly 256 bytes?
-	ld1		{v4.16b-v7.16b}, [x10]
-	add		x7, x7, x1
-	tbl		v0.16b, {v12.16b-v15.16b}, v4.16b
-	tbl		v1.16b, {v12.16b-v15.16b}, v5.16b
-	tbl		v2.16b, {v12.16b-v15.16b}, v6.16b
-	tbl		v3.16b, {v12.16b-v15.16b}, v7.16b
-
-	eor		v28.16b, v28.16b, v0.16b
-	eor		v29.16b, v29.16b, v1.16b
-	eor		v30.16b, v30.16b, v2.16b
-	eor		v31.16b, v31.16b, v3.16b
-	st1		{v28.16b-v31.16b}, [x7]		// overlapping stores
-3:	st1		{v24.16b-v27.16b}, [x1]
-	b		.Lout
-SYM_FUNC_END(chacha_4block_xor_neon)
-
-	.section	".rodata", "a", %progbits
-	.align		L1_CACHE_SHIFT
-.Lpermute:
-	.set		.Li, 0
-	.rept		128
-	.byte		(.Li - 64)
-	.set		.Li, .Li + 1
-	.endr
-
-CTRINC:	.word		1, 2, 3, 4
-ROT8:	.word		0x02010003, 0x06050407, 0x0a09080b, 0x0e0d0c0f
diff --git a/arch/arm64/crypto/chacha-neon-glue.c b/arch/arm64/crypto/chacha-neon-glue.c
deleted file mode 100644
index af2bbca38e70..000000000000
--- a/arch/arm64/crypto/chacha-neon-glue.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * ARM NEON and scalar accelerated ChaCha and XChaCha stream ciphers,
- * including ChaCha20 (RFC7539)
- *
- * Copyright (C) 2016 - 2017 Linaro, Ltd. <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Based on:
- * ChaCha20 256-bit cipher algorithm, RFC7539, SIMD glue code
- *
- * Copyright (C) 2015 Martin Willi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <crypto/algapi.h>
-#include <crypto/internal/chacha.h>
-#include <crypto/internal/simd.h>
-#include <crypto/internal/skcipher.h>
-#include <linux/jump_label.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-asmlinkage void chacha_block_xor_neon(u32 *state, u8 *dst, const u8 *src,
-				      int nrounds);
-asmlinkage void chacha_4block_xor_neon(u32 *state, u8 *dst, const u8 *src,
-				       int nrounds, int bytes);
-asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-
-static void chacha_doneon(u32 *state, u8 *dst, const u8 *src,
-			  int bytes, int nrounds)
-{
-	while (bytes > 0) {
-		int l = min(bytes, CHACHA_BLOCK_SIZE * 5);
-
-		if (l <= CHACHA_BLOCK_SIZE) {
-			u8 buf[CHACHA_BLOCK_SIZE];
-
-			memcpy(buf, src, l);
-			chacha_block_xor_neon(state, buf, buf, nrounds);
-			memcpy(dst, buf, l);
-			state[12] += 1;
-			break;
-		}
-		chacha_4block_xor_neon(state, dst, src, nrounds, l);
-		bytes -= l;
-		src += l;
-		dst += l;
-		state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
-	}
-}
-
-void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
-{
-	if (!static_branch_likely(&have_neon) || !crypto_simd_usable()) {
-		hchacha_block_generic(state, stream, nrounds);
-	} else {
-		kernel_neon_begin();
-		hchacha_block_neon(state, stream, nrounds);
-		kernel_neon_end();
-	}
-}
-EXPORT_SYMBOL(hchacha_block_arch);
-
-void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
-{
-	chacha_init_generic(state, key, iv);
-}
-EXPORT_SYMBOL(chacha_init_arch);
-
-void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
-		       int nrounds)
-{
-	if (!static_branch_likely(&have_neon) || bytes <= CHACHA_BLOCK_SIZE ||
-	    !crypto_simd_usable())
-		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
-
-	do {
-		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
-
-		kernel_neon_begin();
-		chacha_doneon(state, dst, src, todo, nrounds);
-		kernel_neon_end();
-
-		bytes -= todo;
-		src += todo;
-		dst += todo;
-	} while (bytes);
-}
-EXPORT_SYMBOL(chacha_crypt_arch);
-
-static int chacha_neon_stream_xor(struct skcipher_request *req,
-				  const struct chacha_ctx *ctx, const u8 *iv)
-{
-	struct skcipher_walk walk;
-	u32 state[16];
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	chacha_init_generic(state, ctx->key, iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-
-		if (nbytes < walk.total)
-			nbytes = rounddown(nbytes, walk.stride);
-
-		if (!static_branch_likely(&have_neon) ||
-		    !crypto_simd_usable()) {
-			chacha_crypt_generic(state, walk.dst.virt.addr,
-					     walk.src.virt.addr, nbytes,
-					     ctx->nrounds);
-		} else {
-			kernel_neon_begin();
-			chacha_doneon(state, walk.dst.virt.addr,
-				      walk.src.virt.addr, nbytes, ctx->nrounds);
-			kernel_neon_end();
-		}
-		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
-	}
-
-	return err;
-}
-
-static int chacha_neon(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	return chacha_neon_stream_xor(req, ctx, req->iv);
-}
-
-static int xchacha_neon(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct chacha_ctx subctx;
-	u32 state[16];
-	u8 real_iv[16];
-
-	chacha_init_generic(state, ctx->key, req->iv);
-	hchacha_block_arch(state, subctx.key, ctx->nrounds);
-	subctx.nrounds = ctx->nrounds;
-
-	memcpy(&real_iv[0], req->iv + 24, 8);
-	memcpy(&real_iv[8], req->iv + 16, 8);
-	return chacha_neon_stream_xor(req, &subctx, real_iv);
-}
-
-static struct skcipher_alg algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 5 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_neon,
-		.decrypt		= chacha_neon,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 5 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_neon,
-		.decrypt		= xchacha_neon,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-neon",
-		.base.cra_priority	= 300,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.walksize		= 5 * CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_neon,
-		.decrypt		= xchacha_neon,
-	}
-};
-
-static int __init chacha_simd_mod_init(void)
-{
-	if (!cpu_have_named_feature(ASIMD))
-		return 0;
-
-	static_branch_enable(&have_neon);
-
-	return IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) ?
-		crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0;
-}
-
-static void __exit chacha_simd_mod_fini(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) && cpu_have_named_feature(ASIMD))
-		crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
-}
-
-module_init(chacha_simd_mod_init);
-module_exit(chacha_simd_mod_fini);
-
-MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (NEON accelerated)");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("chacha20");
-MODULE_ALIAS_CRYPTO("chacha20-neon");
-MODULE_ALIAS_CRYPTO("xchacha20");
-MODULE_ALIAS_CRYPTO("xchacha20-neon");
-MODULE_ALIAS_CRYPTO("xchacha12");
-MODULE_ALIAS_CRYPTO("xchacha12-neon");
diff --git a/arch/arm64/crypto/crct10dif-ce-core.S b/arch/arm64/crypto/crct10dif-ce-core.S
deleted file mode 100644
index 87dd6d46224d..000000000000
--- a/arch/arm64/crypto/crct10dif-ce-core.S
+++ /dev/null
@@ -1,469 +0,0 @@
-//
-// Accelerated CRC-T10DIF using arm64 NEON and Crypto Extensions instructions
-//
-// Copyright (C) 2016 Linaro Ltd
-// Copyright (C) 2019-2024 Google LLC
-//
-// Authors: Ard Biesheuvel <ardb@google.com>
-//          Eric Biggers <ebiggers@google.com>
-//
-// This program is free software; you can redistribute it and/or modify
-// it under the terms of the GNU General Public License version 2 as
-// published by the Free Software Foundation.
-//
-
-// Derived from the x86 version:
-//
-// Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions
-//
-// Copyright (c) 2013, Intel Corporation
-//
-// Authors:
-//     Erdinc Ozturk <erdinc.ozturk@intel.com>
-//     Vinodh Gopal <vinodh.gopal@intel.com>
-//     James Guilford <james.guilford@intel.com>
-//     Tim Chen <tim.c.chen@linux.intel.com>
-//
-// This software is available to you under a choice of one of two
-// licenses.  You may choose to be licensed under the terms of the GNU
-// General Public License (GPL) Version 2, available from the file
-// COPYING in the main directory of this source tree, or the
-// OpenIB.org BSD license below:
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-// * Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// * Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the
-//   distribution.
-//
-// * Neither the name of the Intel Corporation nor the names of its
-//   contributors may be used to endorse or promote products derived from
-//   this software without specific prior written permission.
-//
-//
-// THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY
-// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR
-// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//       Reference paper titled "Fast CRC Computation for Generic
-//	Polynomials Using PCLMULQDQ Instruction"
-//       URL: http://www.intel.com/content/dam/www/public/us/en/documents
-//  /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
-//
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.arch		armv8-a+crypto
-
-	init_crc	.req	w0
-	buf		.req	x1
-	len		.req	x2
-	fold_consts_ptr	.req	x5
-
-	fold_consts	.req	v10
-
-	t3		.req	v17
-	t4		.req	v18
-	t5		.req	v19
-	t6		.req	v20
-	t7		.req	v21
-	t8		.req	v22
-
-	perm		.req	v27
-
-	.macro		pmull16x64_p64, a16, b64, c64
-	pmull2		\c64\().1q, \a16\().2d, \b64\().2d
-	pmull		\b64\().1q, \a16\().1d, \b64\().1d
-	.endm
-
-	/*
-	 * Pairwise long polynomial multiplication of two 16-bit values
-	 *
-	 *   { w0, w1 }, { y0, y1 }
-	 *
-	 * by two 64-bit values
-	 *
-	 *   { x0, x1, x2, x3, x4, x5, x6, x7 }, { z0, z1, z2, z3, z4, z5, z6, z7 }
-	 *
-	 * where each vector element is a byte, ordered from least to most
-	 * significant.
-	 *
-	 * This can be implemented using 8x8 long polynomial multiplication, by
-	 * reorganizing the input so that each pairwise 8x8 multiplication
-	 * produces one of the terms from the decomposition below, and
-	 * combining the results of each rank and shifting them into place.
-	 *
-	 * Rank
-	 *  0            w0*x0 ^              |        y0*z0 ^
-	 *  1       (w0*x1 ^ w1*x0) <<  8 ^   |   (y0*z1 ^ y1*z0) <<  8 ^
-	 *  2       (w0*x2 ^ w1*x1) << 16 ^   |   (y0*z2 ^ y1*z1) << 16 ^
-	 *  3       (w0*x3 ^ w1*x2) << 24 ^   |   (y0*z3 ^ y1*z2) << 24 ^
-	 *  4       (w0*x4 ^ w1*x3) << 32 ^   |   (y0*z4 ^ y1*z3) << 32 ^
-	 *  5       (w0*x5 ^ w1*x4) << 40 ^   |   (y0*z5 ^ y1*z4) << 40 ^
-	 *  6       (w0*x6 ^ w1*x5) << 48 ^   |   (y0*z6 ^ y1*z5) << 48 ^
-	 *  7       (w0*x7 ^ w1*x6) << 56 ^   |   (y0*z7 ^ y1*z6) << 56 ^
-	 *  8            w1*x7      << 64     |        y1*z7      << 64
-	 *
-	 * The inputs can be reorganized into
-	 *
-	 *   { w0, w0, w0, w0, y0, y0, y0, y0 }, { w1, w1, w1, w1, y1, y1, y1, y1 }
-	 *   { x0, x2, x4, x6, z0, z2, z4, z6 }, { x1, x3, x5, x7, z1, z3, z5, z7 }
-	 *
-	 * and after performing 8x8->16 bit long polynomial multiplication of
-	 * each of the halves of the first vector with those of the second one,
-	 * we obtain the following four vectors of 16-bit elements:
-	 *
-	 *   a := { w0*x0, w0*x2, w0*x4, w0*x6 }, { y0*z0, y0*z2, y0*z4, y0*z6 }
-	 *   b := { w0*x1, w0*x3, w0*x5, w0*x7 }, { y0*z1, y0*z3, y0*z5, y0*z7 }
-	 *   c := { w1*x0, w1*x2, w1*x4, w1*x6 }, { y1*z0, y1*z2, y1*z4, y1*z6 }
-	 *   d := { w1*x1, w1*x3, w1*x5, w1*x7 }, { y1*z1, y1*z3, y1*z5, y1*z7 }
-	 *
-	 * Results b and c can be XORed together, as the vector elements have
-	 * matching ranks. Then, the final XOR (*) can be pulled forward, and
-	 * applied between the halves of each of the remaining three vectors,
-	 * which are then shifted into place, and combined to produce two
-	 * 80-bit results.
-	 *
-	 * (*) NOTE: the 16x64 bit polynomial multiply below is not equivalent
-	 * to the 64x64 bit one above, but XOR'ing the outputs together will
-	 * produce the expected result, and this is sufficient in the context of
-	 * this algorithm.
-	 */
-	.macro		pmull16x64_p8, a16, b64, c64
-	ext		t7.16b, \b64\().16b, \b64\().16b, #1
-	tbl		t5.16b, {\a16\().16b}, perm.16b
-	uzp1		t7.16b, \b64\().16b, t7.16b
-	bl		__pmull_p8_16x64
-	ext		\b64\().16b, t4.16b, t4.16b, #15
-	eor		\c64\().16b, t8.16b, t5.16b
-	.endm
-
-SYM_FUNC_START_LOCAL(__pmull_p8_16x64)
-	ext		t6.16b, t5.16b, t5.16b, #8
-
-	pmull		t3.8h, t7.8b, t5.8b
-	pmull		t4.8h, t7.8b, t6.8b
-	pmull2		t5.8h, t7.16b, t5.16b
-	pmull2		t6.8h, t7.16b, t6.16b
-
-	ext		t8.16b, t3.16b, t3.16b, #8
-	eor		t4.16b, t4.16b, t6.16b
-	ext		t7.16b, t5.16b, t5.16b, #8
-	ext		t6.16b, t4.16b, t4.16b, #8
-	eor		t8.8b, t8.8b, t3.8b
-	eor		t5.8b, t5.8b, t7.8b
-	eor		t4.8b, t4.8b, t6.8b
-	ext		t5.16b, t5.16b, t5.16b, #14
-	ret
-SYM_FUNC_END(__pmull_p8_16x64)
-
-
-	// Fold reg1, reg2 into the next 32 data bytes, storing the result back
-	// into reg1, reg2.
-	.macro		fold_32_bytes, p, reg1, reg2
-	ldp		q11, q12, [buf], #0x20
-
-	pmull16x64_\p	fold_consts, \reg1, v8
-
-CPU_LE(	rev64		v11.16b, v11.16b		)
-CPU_LE(	rev64		v12.16b, v12.16b		)
-
-	pmull16x64_\p	fold_consts, \reg2, v9
-
-CPU_LE(	ext		v11.16b, v11.16b, v11.16b, #8	)
-CPU_LE(	ext		v12.16b, v12.16b, v12.16b, #8	)
-
-	eor		\reg1\().16b, \reg1\().16b, v8.16b
-	eor		\reg2\().16b, \reg2\().16b, v9.16b
-	eor		\reg1\().16b, \reg1\().16b, v11.16b
-	eor		\reg2\().16b, \reg2\().16b, v12.16b
-	.endm
-
-	// Fold src_reg into dst_reg, optionally loading the next fold constants
-	.macro		fold_16_bytes, p, src_reg, dst_reg, load_next_consts
-	pmull16x64_\p	fold_consts, \src_reg, v8
-	.ifnb		\load_next_consts
-	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
-	.endif
-	eor		\dst_reg\().16b, \dst_reg\().16b, v8.16b
-	eor		\dst_reg\().16b, \dst_reg\().16b, \src_reg\().16b
-	.endm
-
-	.macro		crc_t10dif_pmull, p
-
-	// For sizes less than 256 bytes, we can't fold 128 bytes at a time.
-	cmp		len, #256
-	b.lt		.Lless_than_256_bytes_\@
-
-	adr_l		fold_consts_ptr, .Lfold_across_128_bytes_consts
-
-	// Load the first 128 data bytes.  Byte swapping is necessary to make
-	// the bit order match the polynomial coefficient order.
-	ldp		q0, q1, [buf]
-	ldp		q2, q3, [buf, #0x20]
-	ldp		q4, q5, [buf, #0x40]
-	ldp		q6, q7, [buf, #0x60]
-	add		buf, buf, #0x80
-CPU_LE(	rev64		v0.16b, v0.16b			)
-CPU_LE(	rev64		v1.16b, v1.16b			)
-CPU_LE(	rev64		v2.16b, v2.16b			)
-CPU_LE(	rev64		v3.16b, v3.16b			)
-CPU_LE(	rev64		v4.16b, v4.16b			)
-CPU_LE(	rev64		v5.16b, v5.16b			)
-CPU_LE(	rev64		v6.16b, v6.16b			)
-CPU_LE(	rev64		v7.16b, v7.16b			)
-CPU_LE(	ext		v0.16b, v0.16b, v0.16b, #8	)
-CPU_LE(	ext		v1.16b, v1.16b, v1.16b, #8	)
-CPU_LE(	ext		v2.16b, v2.16b, v2.16b, #8	)
-CPU_LE(	ext		v3.16b, v3.16b, v3.16b, #8	)
-CPU_LE(	ext		v4.16b, v4.16b, v4.16b, #8	)
-CPU_LE(	ext		v5.16b, v5.16b, v5.16b, #8	)
-CPU_LE(	ext		v6.16b, v6.16b, v6.16b, #8	)
-CPU_LE(	ext		v7.16b, v7.16b, v7.16b, #8	)
-
-	// XOR the first 16 data *bits* with the initial CRC value.
-	movi		v8.16b, #0
-	mov		v8.h[7], init_crc
-	eor		v0.16b, v0.16b, v8.16b
-
-	// Load the constants for folding across 128 bytes.
-	ld1		{fold_consts.2d}, [fold_consts_ptr]
-
-	// Subtract 128 for the 128 data bytes just consumed.  Subtract another
-	// 128 to simplify the termination condition of the following loop.
-	sub		len, len, #256
-
-	// While >= 128 data bytes remain (not counting v0-v7), fold the 128
-	// bytes v0-v7 into them, storing the result back into v0-v7.
-.Lfold_128_bytes_loop_\@:
-	fold_32_bytes	\p, v0, v1
-	fold_32_bytes	\p, v2, v3
-	fold_32_bytes	\p, v4, v5
-	fold_32_bytes	\p, v6, v7
-
-	subs		len, len, #128
-	b.ge		.Lfold_128_bytes_loop_\@
-
-	// Now fold the 112 bytes in v0-v6 into the 16 bytes in v7.
-
-	// Fold across 64 bytes.
-	add		fold_consts_ptr, fold_consts_ptr, #16
-	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
-	fold_16_bytes	\p, v0, v4
-	fold_16_bytes	\p, v1, v5
-	fold_16_bytes	\p, v2, v6
-	fold_16_bytes	\p, v3, v7, 1
-	// Fold across 32 bytes.
-	fold_16_bytes	\p, v4, v6
-	fold_16_bytes	\p, v5, v7, 1
-	// Fold across 16 bytes.
-	fold_16_bytes	\p, v6, v7
-
-	// Add 128 to get the correct number of data bytes remaining in 0...127
-	// (not counting v7), following the previous extra subtraction by 128.
-	// Then subtract 16 to simplify the termination condition of the
-	// following loop.
-	adds		len, len, #(128-16)
-
-	// While >= 16 data bytes remain (not counting v7), fold the 16 bytes v7
-	// into them, storing the result back into v7.
-	b.lt		.Lfold_16_bytes_loop_done_\@
-.Lfold_16_bytes_loop_\@:
-	pmull16x64_\p	fold_consts, v7, v8
-	eor		v7.16b, v7.16b, v8.16b
-	ldr		q0, [buf], #16
-CPU_LE(	rev64		v0.16b, v0.16b			)
-CPU_LE(	ext		v0.16b, v0.16b, v0.16b, #8	)
-	eor		v7.16b, v7.16b, v0.16b
-	subs		len, len, #16
-	b.ge		.Lfold_16_bytes_loop_\@
-
-.Lfold_16_bytes_loop_done_\@:
-	// Add 16 to get the correct number of data bytes remaining in 0...15
-	// (not counting v7), following the previous extra subtraction by 16.
-	adds		len, len, #16
-	b.eq		.Lreduce_final_16_bytes_\@
-
-.Lhandle_partial_segment_\@:
-	// Reduce the last '16 + len' bytes where 1 <= len <= 15 and the first
-	// 16 bytes are in v7 and the rest are the remaining data in 'buf'.  To
-	// do this without needing a fold constant for each possible 'len',
-	// redivide the bytes into a first chunk of 'len' bytes and a second
-	// chunk of 16 bytes, then fold the first chunk into the second.
-
-	// v0 = last 16 original data bytes
-	add		buf, buf, len
-	ldr		q0, [buf, #-16]
-CPU_LE(	rev64		v0.16b, v0.16b			)
-CPU_LE(	ext		v0.16b, v0.16b, v0.16b, #8	)
-
-	// v1 = high order part of second chunk: v7 left-shifted by 'len' bytes.
-	adr_l		x4, .Lbyteshift_table + 16
-	sub		x4, x4, len
-	ld1		{v2.16b}, [x4]
-	tbl		v1.16b, {v7.16b}, v2.16b
-
-	// v3 = first chunk: v7 right-shifted by '16-len' bytes.
-	movi		v3.16b, #0x80
-	eor		v2.16b, v2.16b, v3.16b
-	tbl		v3.16b, {v7.16b}, v2.16b
-
-	// Convert to 8-bit masks: 'len' 0x00 bytes, then '16-len' 0xff bytes.
-	sshr		v2.16b, v2.16b, #7
-
-	// v2 = second chunk: 'len' bytes from v0 (low-order bytes),
-	// then '16-len' bytes from v1 (high-order bytes).
-	bsl		v2.16b, v1.16b, v0.16b
-
-	// Fold the first chunk into the second chunk, storing the result in v7.
-	pmull16x64_\p	fold_consts, v3, v0
-	eor		v7.16b, v3.16b, v0.16b
-	eor		v7.16b, v7.16b, v2.16b
-	b		.Lreduce_final_16_bytes_\@
-
-.Lless_than_256_bytes_\@:
-	// Checksumming a buffer of length 16...255 bytes
-
-	adr_l		fold_consts_ptr, .Lfold_across_16_bytes_consts
-
-	// Load the first 16 data bytes.
-	ldr		q7, [buf], #0x10
-CPU_LE(	rev64		v7.16b, v7.16b			)
-CPU_LE(	ext		v7.16b, v7.16b, v7.16b, #8	)
-
-	// XOR the first 16 data *bits* with the initial CRC value.
-	movi		v0.16b, #0
-	mov		v0.h[7], init_crc
-	eor		v7.16b, v7.16b, v0.16b
-
-	// Load the fold-across-16-bytes constants.
-	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
-
-	cmp		len, #16
-	b.eq		.Lreduce_final_16_bytes_\@	// len == 16
-	subs		len, len, #32
-	b.ge		.Lfold_16_bytes_loop_\@		// 32 <= len <= 255
-	add		len, len, #16
-	b		.Lhandle_partial_segment_\@	// 17 <= len <= 31
-
-.Lreduce_final_16_bytes_\@:
-	.endm
-
-//
-// u16 crc_t10dif_pmull_p8(u16 init_crc, const u8 *buf, size_t len);
-//
-// Assumes len >= 16.
-//
-SYM_FUNC_START(crc_t10dif_pmull_p8)
-	frame_push	1
-
-	// Compose { 0,0,0,0, 8,8,8,8, 1,1,1,1, 9,9,9,9 }
-	movi		perm.4h, #8, lsl #8
-	orr		perm.2s, #1, lsl #16
-	orr		perm.2s, #1, lsl #24
-	zip1		perm.16b, perm.16b, perm.16b
-	zip1		perm.16b, perm.16b, perm.16b
-
-	crc_t10dif_pmull p8
-
-CPU_LE(	rev64		v7.16b, v7.16b			)
-CPU_LE(	ext		v7.16b, v7.16b, v7.16b, #8	)
-	str		q7, [x3]
-
-	frame_pop
-	ret
-SYM_FUNC_END(crc_t10dif_pmull_p8)
-
-	.align		5
-//
-// u16 crc_t10dif_pmull_p64(u16 init_crc, const u8 *buf, size_t len);
-//
-// Assumes len >= 16.
-//
-SYM_FUNC_START(crc_t10dif_pmull_p64)
-	crc_t10dif_pmull	p64
-
-	// Reduce the 128-bit value M(x), stored in v7, to the final 16-bit CRC.
-
-	movi		v2.16b, #0		// init zero register
-
-	// Load 'x^48 * (x^48 mod G(x))' and 'x^48 * (x^80 mod G(x))'.
-	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
-
-	// Fold the high 64 bits into the low 64 bits, while also multiplying by
-	// x^64.  This produces a 128-bit value congruent to x^64 * M(x) and
-	// whose low 48 bits are 0.
-	ext		v0.16b, v2.16b, v7.16b, #8
-	pmull2		v7.1q, v7.2d, fold_consts.2d	// high bits * x^48 * (x^80 mod G(x))
-	eor		v0.16b, v0.16b, v7.16b		// + low bits * x^64
-
-	// Fold the high 32 bits into the low 96 bits.  This produces a 96-bit
-	// value congruent to x^64 * M(x) and whose low 48 bits are 0.
-	ext		v1.16b, v0.16b, v2.16b, #12	// extract high 32 bits
-	mov		v0.s[3], v2.s[0]		// zero high 32 bits
-	pmull		v1.1q, v1.1d, fold_consts.1d	// high 32 bits * x^48 * (x^48 mod G(x))
-	eor		v0.16b, v0.16b, v1.16b		// + low bits
-
-	// Load G(x) and floor(x^48 / G(x)).
-	ld1		{fold_consts.2d}, [fold_consts_ptr]
-
-	// Use Barrett reduction to compute the final CRC value.
-	pmull2		v1.1q, v0.2d, fold_consts.2d	// high 32 bits * floor(x^48 / G(x))
-	ushr		v1.2d, v1.2d, #32		// /= x^32
-	pmull		v1.1q, v1.1d, fold_consts.1d	// *= G(x)
-	ushr		v0.2d, v0.2d, #48
-	eor		v0.16b, v0.16b, v1.16b		// + low 16 nonzero bits
-	// Final CRC value (x^16 * M(x)) mod G(x) is in low 16 bits of v0.
-
-	umov		w0, v0.h[0]
-	ret
-SYM_FUNC_END(crc_t10dif_pmull_p64)
-
-	.section	".rodata", "a"
-	.align		4
-
-// Fold constants precomputed from the polynomial 0x18bb7
-// G(x) = x^16 + x^15 + x^11 + x^9 + x^8 + x^7 + x^5 + x^4 + x^2 + x^1 + x^0
-.Lfold_across_128_bytes_consts:
-	.quad		0x0000000000006123	// x^(8*128)	mod G(x)
-	.quad		0x0000000000002295	// x^(8*128+64)	mod G(x)
-// .Lfold_across_64_bytes_consts:
-	.quad		0x0000000000001069	// x^(4*128)	mod G(x)
-	.quad		0x000000000000dd31	// x^(4*128+64)	mod G(x)
-// .Lfold_across_32_bytes_consts:
-	.quad		0x000000000000857d	// x^(2*128)	mod G(x)
-	.quad		0x0000000000007acc	// x^(2*128+64)	mod G(x)
-.Lfold_across_16_bytes_consts:
-	.quad		0x000000000000a010	// x^(1*128)	mod G(x)
-	.quad		0x0000000000001faa	// x^(1*128+64)	mod G(x)
-// .Lfinal_fold_consts:
-	.quad		0x1368000000000000	// x^48 * (x^48 mod G(x))
-	.quad		0x2d56000000000000	// x^48 * (x^80 mod G(x))
-// .Lbarrett_reduction_consts:
-	.quad		0x0000000000018bb7	// G(x)
-	.quad		0x00000001f65a57f8	// floor(x^48 / G(x))
-
-// For 1 <= len <= 15, the 16-byte vector beginning at &byteshift_table[16 -
-// len] is the index vector to shift left by 'len' bytes, and is also {0x80,
-// ..., 0x80} XOR the index vector to shift right by '16 - len' bytes.
-.Lbyteshift_table:
-	.byte		 0x0, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87
-	.byte		0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f
-	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
-	.byte		 0x8,  0x9,  0xa,  0xb,  0xc,  0xd,  0xe , 0x0
diff --git a/arch/arm64/crypto/crct10dif-ce-glue.c b/arch/arm64/crypto/crct10dif-ce-glue.c
deleted file mode 100644
index 08bcbd884395..000000000000
--- a/arch/arm64/crypto/crct10dif-ce-glue.c
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Accelerated CRC-T10DIF using arm64 NEON and Crypto Extensions instructions
- *
- * Copyright (C) 2016 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/cpufeature.h>
-#include <linux/crc-t10dif.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#define CRC_T10DIF_PMULL_CHUNK_SIZE	16U
-
-asmlinkage void crc_t10dif_pmull_p8(u16 init_crc, const u8 *buf, size_t len,
-				    u8 out[16]);
-asmlinkage u16 crc_t10dif_pmull_p64(u16 init_crc, const u8 *buf, size_t len);
-
-static int crct10dif_init(struct shash_desc *desc)
-{
-	u16 *crc = shash_desc_ctx(desc);
-
-	*crc = 0;
-	return 0;
-}
-
-static int crct10dif_update_pmull_p8(struct shash_desc *desc, const u8 *data,
-			    unsigned int length)
-{
-	u16 *crcp = shash_desc_ctx(desc);
-	u16 crc = *crcp;
-	u8 buf[16];
-
-	if (length > CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) {
-		kernel_neon_begin();
-		crc_t10dif_pmull_p8(crc, data, length, buf);
-		kernel_neon_end();
-
-		crc = 0;
-		data = buf;
-		length = sizeof(buf);
-	}
-
-	*crcp = crc_t10dif_generic(crc, data, length);
-	return 0;
-}
-
-static int crct10dif_update_pmull_p64(struct shash_desc *desc, const u8 *data,
-			    unsigned int length)
-{
-	u16 *crc = shash_desc_ctx(desc);
-
-	if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) {
-		kernel_neon_begin();
-		*crc = crc_t10dif_pmull_p64(*crc, data, length);
-		kernel_neon_end();
-	} else {
-		*crc = crc_t10dif_generic(*crc, data, length);
-	}
-
-	return 0;
-}
-
-static int crct10dif_final(struct shash_desc *desc, u8 *out)
-{
-	u16 *crc = shash_desc_ctx(desc);
-
-	*(u16 *)out = *crc;
-	return 0;
-}
-
-static struct shash_alg crc_t10dif_alg[] = {{
-	.digestsize		= CRC_T10DIF_DIGEST_SIZE,
-	.init			= crct10dif_init,
-	.update			= crct10dif_update_pmull_p8,
-	.final			= crct10dif_final,
-	.descsize		= CRC_T10DIF_DIGEST_SIZE,
-
-	.base.cra_name		= "crct10dif",
-	.base.cra_driver_name	= "crct10dif-arm64-neon",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= CRC_T10DIF_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-}, {
-	.digestsize		= CRC_T10DIF_DIGEST_SIZE,
-	.init			= crct10dif_init,
-	.update			= crct10dif_update_pmull_p64,
-	.final			= crct10dif_final,
-	.descsize		= CRC_T10DIF_DIGEST_SIZE,
-
-	.base.cra_name		= "crct10dif",
-	.base.cra_driver_name	= "crct10dif-arm64-ce",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= CRC_T10DIF_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-}};
-
-static int __init crc_t10dif_mod_init(void)
-{
-	if (cpu_have_named_feature(PMULL))
-		return crypto_register_shashes(crc_t10dif_alg,
-					       ARRAY_SIZE(crc_t10dif_alg));
-	else
-		/* only register the first array element */
-		return crypto_register_shash(crc_t10dif_alg);
-}
-
-static void __exit crc_t10dif_mod_exit(void)
-{
-	if (cpu_have_named_feature(PMULL))
-		crypto_unregister_shashes(crc_t10dif_alg,
-					  ARRAY_SIZE(crc_t10dif_alg));
-	else
-		crypto_unregister_shash(crc_t10dif_alg);
-}
-
-module_cpu_feature_match(ASIMD, crc_t10dif_mod_init);
-module_exit(crc_t10dif_mod_exit);
-
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_DESCRIPTION("CRC-T10DIF using arm64 NEON and Crypto Extensions");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("crct10dif");
-MODULE_ALIAS_CRYPTO("crct10dif-arm64-ce");
diff --git a/arch/arm64/crypto/ghash-ce-glue.c b/arch/arm64/crypto/ghash-ce-glue.c
index da7b7ec1a664..7951557a285a 100644
--- a/arch/arm64/crypto/ghash-ce-glue.c
+++ b/arch/arm64/crypto/ghash-ce-glue.c
@@ -5,31 +5,29 @@
  * Copyright (C) 2014 - 2018 Linaro Ltd. <ard.biesheuvel@linaro.org>
  */
 
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/aes.h>
-#include <crypto/gcm.h>
-#include <crypto/algapi.h>
 #include <crypto/b128ops.h>
+#include <crypto/gcm.h>
+#include <crypto/ghash.h>
 #include <crypto/gf128mul.h>
 #include <crypto/internal/aead.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/string.h>
+#include <linux/unaligned.h>
+
+#include <asm/simd.h>
 
 MODULE_DESCRIPTION("GHASH and AES-GCM using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS_CRYPTO("ghash");
 
-#define GHASH_BLOCK_SIZE	16
-#define GHASH_DIGEST_SIZE	16
-
 #define RFC4106_NONCE_SIZE	4
 
 struct ghash_key {
@@ -37,10 +35,8 @@ struct ghash_key {
 	u64			h[][2];
 };
 
-struct ghash_desc_ctx {
+struct arm_ghash_desc_ctx {
 	u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)];
-	u8 buf[GHASH_BLOCK_SIZE];
-	u32 count;
 };
 
 struct gcm_aes_ctx {
@@ -65,36 +61,12 @@ asmlinkage int pmull_gcm_decrypt(int bytes, u8 dst[], const u8 src[],
 
 static int ghash_init(struct shash_desc *desc)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	*ctx = (struct ghash_desc_ctx){};
+	*ctx = (struct arm_ghash_desc_ctx){};
 	return 0;
 }
 
-static void ghash_do_update(int blocks, u64 dg[], const char *src,
-			    struct ghash_key *key, const char *head)
-{
-	be128 dst = { cpu_to_be64(dg[1]), cpu_to_be64(dg[0]) };
-
-	do {
-		const u8 *in = src;
-
-		if (head) {
-			in = head;
-			blocks++;
-			head = NULL;
-		} else {
-			src += GHASH_BLOCK_SIZE;
-		}
-
-		crypto_xor((u8 *)&dst, in, GHASH_BLOCK_SIZE);
-		gf128mul_lle(&dst, &key->k);
-	} while (--blocks);
-
-	dg[0] = be64_to_cpu(dst.b);
-	dg[1] = be64_to_cpu(dst.a);
-}
-
 static __always_inline
 void ghash_do_simd_update(int blocks, u64 dg[], const char *src,
 			  struct ghash_key *key, const char *head,
@@ -103,13 +75,8 @@ void ghash_do_simd_update(int blocks, u64 dg[], const char *src,
 					      u64 const h[][2],
 					      const char *head))
 {
-	if (likely(crypto_simd_usable())) {
-		kernel_neon_begin();
+	scoped_ksimd()
 		simd_update(blocks, dg, src, key->h, head);
-		kernel_neon_end();
-	} else {
-		ghash_do_update(blocks, dg, src, key, head);
-	}
 }
 
 /* avoid hogging the CPU for too long */
@@ -118,61 +85,59 @@ void ghash_do_simd_update(int blocks, u64 dg[], const char *src,
 static int ghash_update(struct shash_desc *desc, const u8 *src,
 			unsigned int len)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
-
-	ctx->count += len;
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	int blocks;
 
-	if ((partial + len) >= GHASH_BLOCK_SIZE) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
-		int blocks;
+	blocks = len / GHASH_BLOCK_SIZE;
+	len -= blocks * GHASH_BLOCK_SIZE;
 
-		if (partial) {
-			int p = GHASH_BLOCK_SIZE - partial;
+	do {
+		int chunk = min(blocks, MAX_BLOCKS);
 
-			memcpy(ctx->buf + partial, src, p);
-			src += p;
-			len -= p;
-		}
+		ghash_do_simd_update(chunk, ctx->digest, src, key, NULL,
+				     pmull_ghash_update_p8);
+		blocks -= chunk;
+		src += chunk * GHASH_BLOCK_SIZE;
+	} while (unlikely(blocks > 0));
+	return len;
+}
 
-		blocks = len / GHASH_BLOCK_SIZE;
-		len %= GHASH_BLOCK_SIZE;
+static int ghash_export(struct shash_desc *desc, void *out)
+{
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	u8 *dst = out;
 
-		do {
-			int chunk = min(blocks, MAX_BLOCKS);
+	put_unaligned_be64(ctx->digest[1], dst);
+	put_unaligned_be64(ctx->digest[0], dst + 8);
+	return 0;
+}
 
-			ghash_do_simd_update(chunk, ctx->digest, src, key,
-					     partial ? ctx->buf : NULL,
-					     pmull_ghash_update_p8);
+static int ghash_import(struct shash_desc *desc, const void *in)
+{
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	const u8 *src = in;
 
-			blocks -= chunk;
-			src += chunk * GHASH_BLOCK_SIZE;
-			partial = 0;
-		} while (unlikely(blocks > 0));
-	}
-	if (len)
-		memcpy(ctx->buf + partial, src, len);
+	ctx->digest[1] = get_unaligned_be64(src);
+	ctx->digest[0] = get_unaligned_be64(src + 8);
 	return 0;
 }
 
-static int ghash_final(struct shash_desc *desc, u8 *dst)
+static int ghash_finup(struct shash_desc *desc, const u8 *src,
+		       unsigned int len, u8 *dst)
 {
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
-
-	if (partial) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+	struct arm_ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct ghash_key *key = crypto_shash_ctx(desc->tfm);
 
-		memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial);
+	if (len) {
+		u8 buf[GHASH_BLOCK_SIZE] = {};
 
-		ghash_do_simd_update(1, ctx->digest, ctx->buf, key, NULL,
+		memcpy(buf, src, len);
+		ghash_do_simd_update(1, ctx->digest, src, key, NULL,
 				     pmull_ghash_update_p8);
+		memzero_explicit(buf, sizeof(buf));
 	}
-	put_unaligned_be64(ctx->digest[1], dst);
-	put_unaligned_be64(ctx->digest[0], dst + 8);
-
-	memzero_explicit(ctx, sizeof(*ctx));
-	return 0;
+	return ghash_export(desc, dst);
 }
 
 static void ghash_reflect(u64 h[], const be128 *k)
@@ -205,6 +170,7 @@ static struct shash_alg ghash_alg = {
 	.base.cra_name		= "ghash",
 	.base.cra_driver_name	= "ghash-neon",
 	.base.cra_priority	= 150,
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
 	.base.cra_blocksize	= GHASH_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct ghash_key) + sizeof(u64[2]),
 	.base.cra_module	= THIS_MODULE,
@@ -212,9 +178,12 @@ static struct shash_alg ghash_alg = {
 	.digestsize		= GHASH_DIGEST_SIZE,
 	.init			= ghash_init,
 	.update			= ghash_update,
-	.final			= ghash_final,
+	.finup			= ghash_finup,
 	.setkey			= ghash_setkey,
-	.descsize		= sizeof(struct ghash_desc_ctx),
+	.export			= ghash_export,
+	.import			= ghash_import,
+	.descsize		= sizeof(struct arm_ghash_desc_ctx),
+	.statesize		= sizeof(struct ghash_desc_ctx),
 };
 
 static int num_rounds(struct crypto_aes_ctx *ctx)
@@ -308,21 +277,12 @@ static void gcm_calculate_auth_mac(struct aead_request *req, u64 dg[], u32 len)
 	scatterwalk_start(&walk, req->src);
 
 	do {
-		u32 n = scatterwalk_clamp(&walk, len);
-		u8 *p;
-
-		if (!n) {
-			scatterwalk_start(&walk, sg_next(walk.sg));
-			n = scatterwalk_clamp(&walk, len);
-		}
-		p = scatterwalk_map(&walk);
+		unsigned int n;
 
-		gcm_update_mac(dg, p, n, buf, &buf_count, ctx);
+		n = scatterwalk_next(&walk, len);
+		gcm_update_mac(dg, walk.addr, n, buf, &buf_count, ctx);
+		scatterwalk_done_src(&walk, n);
 		len -= n;
-
-		scatterwalk_unmap(p);
-		scatterwalk_advance(&walk, n);
-		scatterwalk_done(&walk, 0, len);
 	} while (len);
 
 	if (buf_count) {
@@ -369,11 +329,10 @@ static int gcm_encrypt(struct aead_request *req, char *iv, int assoclen)
 			tag = NULL;
 		}
 
-		kernel_neon_begin();
-		pmull_gcm_encrypt(nbytes, dst, src, ctx->ghash_key.h,
-				  dg, iv, ctx->aes_key.key_enc, nrounds,
-				  tag);
-		kernel_neon_end();
+		scoped_ksimd()
+			pmull_gcm_encrypt(nbytes, dst, src, ctx->ghash_key.h,
+					  dg, iv, ctx->aes_key.key_enc, nrounds,
+					  tag);
 
 		if (unlikely(!nbytes))
 			break;
@@ -439,11 +398,11 @@ static int gcm_decrypt(struct aead_request *req, char *iv, int assoclen)
 			tag = NULL;
 		}
 
-		kernel_neon_begin();
-		ret = pmull_gcm_decrypt(nbytes, dst, src, ctx->ghash_key.h,
-					dg, iv, ctx->aes_key.key_enc,
-					nrounds, tag, otag, authsize);
-		kernel_neon_end();
+		scoped_ksimd()
+			ret = pmull_gcm_decrypt(nbytes, dst, src,
+						ctx->ghash_key.h,
+						dg, iv, ctx->aes_key.key_enc,
+						nrounds, tag, otag, authsize);
 
 		if (unlikely(!nbytes))
 			break;
diff --git a/arch/arm64/crypto/nhpoly1305-neon-glue.c b/arch/arm64/crypto/nhpoly1305-neon-glue.c
index e4a0b463f080..013de6ac569a 100644
--- a/arch/arm64/crypto/nhpoly1305-neon-glue.c
+++ b/arch/arm64/crypto/nhpoly1305-neon-glue.c
@@ -25,9 +25,8 @@ static int nhpoly1305_neon_update(struct shash_desc *desc,
 	do {
 		unsigned int n = min_t(unsigned int, srclen, SZ_4K);
 
-		kernel_neon_begin();
-		crypto_nhpoly1305_update_helper(desc, src, n, nh_neon);
-		kernel_neon_end();
+		scoped_ksimd()
+			crypto_nhpoly1305_update_helper(desc, src, n, nh_neon);
 		src += n;
 		srclen -= n;
 	} while (srclen);
diff --git a/arch/arm64/crypto/poly1305-armv8.pl b/arch/arm64/crypto/poly1305-armv8.pl
deleted file mode 100644
index 22c9069c0650..000000000000
--- a/arch/arm64/crypto/poly1305-armv8.pl
+++ /dev/null
@@ -1,917 +0,0 @@
-#!/usr/bin/env perl
-# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause
-#
-# ====================================================================
-# Written by Andy Polyakov, @dot-asm, initially for the OpenSSL
-# project.
-# ====================================================================
-#
-# This module implements Poly1305 hash for ARMv8.
-#
-# June 2015
-#
-# Numbers are cycles per processed byte with poly1305_blocks alone.
-#
-#		IALU/gcc-4.9	NEON
-#
-# Apple A7	1.86/+5%	0.72
-# Cortex-A53	2.69/+58%	1.47
-# Cortex-A57	2.70/+7%	1.14
-# Denver	1.64/+50%	1.18(*)
-# X-Gene	2.13/+68%	2.27
-# Mongoose	1.77/+75%	1.12
-# Kryo		2.70/+55%	1.13
-# ThunderX2	1.17/+95%	1.36
-#
-# (*)	estimate based on resources availability is less than 1.0,
-#	i.e. measured result is worse than expected, presumably binary
-#	translator is not almighty;
-
-$flavour=shift;
-$output=shift;
-
-if ($flavour && $flavour ne "void") {
-    $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-    ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
-    ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
-    die "can't locate arm-xlate.pl";
-
-    open STDOUT,"| \"$^X\" $xlate $flavour $output";
-} else {
-    open STDOUT,">$output";
-}
-
-my ($ctx,$inp,$len,$padbit) = map("x$_",(0..3));
-my ($mac,$nonce)=($inp,$len);
-
-my ($h0,$h1,$h2,$r0,$r1,$s1,$t0,$t1,$d0,$d1,$d2) = map("x$_",(4..14));
-
-$code.=<<___;
-#ifndef __KERNEL__
-# include "arm_arch.h"
-.extern	OPENSSL_armcap_P
-#endif
-
-.text
-
-// forward "declarations" are required for Apple
-.globl	poly1305_blocks
-.globl	poly1305_emit
-
-.globl	poly1305_init
-.type	poly1305_init,%function
-.align	5
-poly1305_init:
-	cmp	$inp,xzr
-	stp	xzr,xzr,[$ctx]		// zero hash value
-	stp	xzr,xzr,[$ctx,#16]	// [along with is_base2_26]
-
-	csel	x0,xzr,x0,eq
-	b.eq	.Lno_key
-
-#ifndef	__KERNEL__
-	adrp	x17,OPENSSL_armcap_P
-	ldr	w17,[x17,#:lo12:OPENSSL_armcap_P]
-#endif
-
-	ldp	$r0,$r1,[$inp]		// load key
-	mov	$s1,#0xfffffffc0fffffff
-	movk	$s1,#0x0fff,lsl#48
-#ifdef	__AARCH64EB__
-	rev	$r0,$r0			// flip bytes
-	rev	$r1,$r1
-#endif
-	and	$r0,$r0,$s1		// &=0ffffffc0fffffff
-	and	$s1,$s1,#-4
-	and	$r1,$r1,$s1		// &=0ffffffc0ffffffc
-	mov	w#$s1,#-1
-	stp	$r0,$r1,[$ctx,#32]	// save key value
-	str	w#$s1,[$ctx,#48]	// impossible key power value
-
-#ifndef	__KERNEL__
-	tst	w17,#ARMV7_NEON
-
-	adr	$d0,.Lpoly1305_blocks
-	adr	$r0,.Lpoly1305_blocks_neon
-	adr	$d1,.Lpoly1305_emit
-
-	csel	$d0,$d0,$r0,eq
-
-# ifdef	__ILP32__
-	stp	w#$d0,w#$d1,[$len]
-# else
-	stp	$d0,$d1,[$len]
-# endif
-#endif
-	mov	x0,#1
-.Lno_key:
-	ret
-.size	poly1305_init,.-poly1305_init
-
-.type	poly1305_blocks,%function
-.align	5
-poly1305_blocks:
-.Lpoly1305_blocks:
-	ands	$len,$len,#-16
-	b.eq	.Lno_data
-
-	ldp	$h0,$h1,[$ctx]		// load hash value
-	ldp	$h2,x17,[$ctx,#16]	// [along with is_base2_26]
-	ldp	$r0,$r1,[$ctx,#32]	// load key value
-
-#ifdef	__AARCH64EB__
-	lsr	$d0,$h0,#32
-	mov	w#$d1,w#$h0
-	lsr	$d2,$h1,#32
-	mov	w15,w#$h1
-	lsr	x16,$h2,#32
-#else
-	mov	w#$d0,w#$h0
-	lsr	$d1,$h0,#32
-	mov	w#$d2,w#$h1
-	lsr	x15,$h1,#32
-	mov	w16,w#$h2
-#endif
-
-	add	$d0,$d0,$d1,lsl#26	// base 2^26 -> base 2^64
-	lsr	$d1,$d2,#12
-	adds	$d0,$d0,$d2,lsl#52
-	add	$d1,$d1,x15,lsl#14
-	adc	$d1,$d1,xzr
-	lsr	$d2,x16,#24
-	adds	$d1,$d1,x16,lsl#40
-	adc	$d2,$d2,xzr
-
-	cmp	x17,#0			// is_base2_26?
-	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
-	csel	$h0,$h0,$d0,eq		// choose between radixes
-	csel	$h1,$h1,$d1,eq
-	csel	$h2,$h2,$d2,eq
-
-.Loop:
-	ldp	$t0,$t1,[$inp],#16	// load input
-	sub	$len,$len,#16
-#ifdef	__AARCH64EB__
-	rev	$t0,$t0
-	rev	$t1,$t1
-#endif
-	adds	$h0,$h0,$t0		// accumulate input
-	adcs	$h1,$h1,$t1
-
-	mul	$d0,$h0,$r0		// h0*r0
-	adc	$h2,$h2,$padbit
-	umulh	$d1,$h0,$r0
-
-	mul	$t0,$h1,$s1		// h1*5*r1
-	umulh	$t1,$h1,$s1
-
-	adds	$d0,$d0,$t0
-	mul	$t0,$h0,$r1		// h0*r1
-	adc	$d1,$d1,$t1
-	umulh	$d2,$h0,$r1
-
-	adds	$d1,$d1,$t0
-	mul	$t0,$h1,$r0		// h1*r0
-	adc	$d2,$d2,xzr
-	umulh	$t1,$h1,$r0
-
-	adds	$d1,$d1,$t0
-	mul	$t0,$h2,$s1		// h2*5*r1
-	adc	$d2,$d2,$t1
-	mul	$t1,$h2,$r0		// h2*r0
-
-	adds	$d1,$d1,$t0
-	adc	$d2,$d2,$t1
-
-	and	$t0,$d2,#-4		// final reduction
-	and	$h2,$d2,#3
-	add	$t0,$t0,$d2,lsr#2
-	adds	$h0,$d0,$t0
-	adcs	$h1,$d1,xzr
-	adc	$h2,$h2,xzr
-
-	cbnz	$len,.Loop
-
-	stp	$h0,$h1,[$ctx]		// store hash value
-	stp	$h2,xzr,[$ctx,#16]	// [and clear is_base2_26]
-
-.Lno_data:
-	ret
-.size	poly1305_blocks,.-poly1305_blocks
-
-.type	poly1305_emit,%function
-.align	5
-poly1305_emit:
-.Lpoly1305_emit:
-	ldp	$h0,$h1,[$ctx]		// load hash base 2^64
-	ldp	$h2,$r0,[$ctx,#16]	// [along with is_base2_26]
-	ldp	$t0,$t1,[$nonce]	// load nonce
-
-#ifdef	__AARCH64EB__
-	lsr	$d0,$h0,#32
-	mov	w#$d1,w#$h0
-	lsr	$d2,$h1,#32
-	mov	w15,w#$h1
-	lsr	x16,$h2,#32
-#else
-	mov	w#$d0,w#$h0
-	lsr	$d1,$h0,#32
-	mov	w#$d2,w#$h1
-	lsr	x15,$h1,#32
-	mov	w16,w#$h2
-#endif
-
-	add	$d0,$d0,$d1,lsl#26	// base 2^26 -> base 2^64
-	lsr	$d1,$d2,#12
-	adds	$d0,$d0,$d2,lsl#52
-	add	$d1,$d1,x15,lsl#14
-	adc	$d1,$d1,xzr
-	lsr	$d2,x16,#24
-	adds	$d1,$d1,x16,lsl#40
-	adc	$d2,$d2,xzr
-
-	cmp	$r0,#0			// is_base2_26?
-	csel	$h0,$h0,$d0,eq		// choose between radixes
-	csel	$h1,$h1,$d1,eq
-	csel	$h2,$h2,$d2,eq
-
-	adds	$d0,$h0,#5		// compare to modulus
-	adcs	$d1,$h1,xzr
-	adc	$d2,$h2,xzr
-
-	tst	$d2,#-4			// see if it's carried/borrowed
-
-	csel	$h0,$h0,$d0,eq
-	csel	$h1,$h1,$d1,eq
-
-#ifdef	__AARCH64EB__
-	ror	$t0,$t0,#32		// flip nonce words
-	ror	$t1,$t1,#32
-#endif
-	adds	$h0,$h0,$t0		// accumulate nonce
-	adc	$h1,$h1,$t1
-#ifdef	__AARCH64EB__
-	rev	$h0,$h0			// flip output bytes
-	rev	$h1,$h1
-#endif
-	stp	$h0,$h1,[$mac]		// write result
-
-	ret
-.size	poly1305_emit,.-poly1305_emit
-___
-my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("v$_.4s",(0..8));
-my ($IN01_0,$IN01_1,$IN01_2,$IN01_3,$IN01_4) = map("v$_.2s",(9..13));
-my ($IN23_0,$IN23_1,$IN23_2,$IN23_3,$IN23_4) = map("v$_.2s",(14..18));
-my ($ACC0,$ACC1,$ACC2,$ACC3,$ACC4) = map("v$_.2d",(19..23));
-my ($H0,$H1,$H2,$H3,$H4) = map("v$_.2s",(24..28));
-my ($T0,$T1,$MASK) = map("v$_",(29..31));
-
-my ($in2,$zeros)=("x16","x17");
-my $is_base2_26 = $zeros;		# borrow
-
-$code.=<<___;
-.type	poly1305_mult,%function
-.align	5
-poly1305_mult:
-	mul	$d0,$h0,$r0		// h0*r0
-	umulh	$d1,$h0,$r0
-
-	mul	$t0,$h1,$s1		// h1*5*r1
-	umulh	$t1,$h1,$s1
-
-	adds	$d0,$d0,$t0
-	mul	$t0,$h0,$r1		// h0*r1
-	adc	$d1,$d1,$t1
-	umulh	$d2,$h0,$r1
-
-	adds	$d1,$d1,$t0
-	mul	$t0,$h1,$r0		// h1*r0
-	adc	$d2,$d2,xzr
-	umulh	$t1,$h1,$r0
-
-	adds	$d1,$d1,$t0
-	mul	$t0,$h2,$s1		// h2*5*r1
-	adc	$d2,$d2,$t1
-	mul	$t1,$h2,$r0		// h2*r0
-
-	adds	$d1,$d1,$t0
-	adc	$d2,$d2,$t1
-
-	and	$t0,$d2,#-4		// final reduction
-	and	$h2,$d2,#3
-	add	$t0,$t0,$d2,lsr#2
-	adds	$h0,$d0,$t0
-	adcs	$h1,$d1,xzr
-	adc	$h2,$h2,xzr
-
-	ret
-.size	poly1305_mult,.-poly1305_mult
-
-.type	poly1305_splat,%function
-.align	4
-poly1305_splat:
-	and	x12,$h0,#0x03ffffff	// base 2^64 -> base 2^26
-	ubfx	x13,$h0,#26,#26
-	extr	x14,$h1,$h0,#52
-	and	x14,x14,#0x03ffffff
-	ubfx	x15,$h1,#14,#26
-	extr	x16,$h2,$h1,#40
-
-	str	w12,[$ctx,#16*0]	// r0
-	add	w12,w13,w13,lsl#2	// r1*5
-	str	w13,[$ctx,#16*1]	// r1
-	add	w13,w14,w14,lsl#2	// r2*5
-	str	w12,[$ctx,#16*2]	// s1
-	str	w14,[$ctx,#16*3]	// r2
-	add	w14,w15,w15,lsl#2	// r3*5
-	str	w13,[$ctx,#16*4]	// s2
-	str	w15,[$ctx,#16*5]	// r3
-	add	w15,w16,w16,lsl#2	// r4*5
-	str	w14,[$ctx,#16*6]	// s3
-	str	w16,[$ctx,#16*7]	// r4
-	str	w15,[$ctx,#16*8]	// s4
-
-	ret
-.size	poly1305_splat,.-poly1305_splat
-
-#ifdef	__KERNEL__
-.globl	poly1305_blocks_neon
-#endif
-.type	poly1305_blocks_neon,%function
-.align	5
-poly1305_blocks_neon:
-.Lpoly1305_blocks_neon:
-	ldr	$is_base2_26,[$ctx,#24]
-	cmp	$len,#128
-	b.lo	.Lpoly1305_blocks
-
-	.inst	0xd503233f		// paciasp
-	stp	x29,x30,[sp,#-80]!
-	add	x29,sp,#0
-
-	stp	d8,d9,[sp,#16]		// meet ABI requirements
-	stp	d10,d11,[sp,#32]
-	stp	d12,d13,[sp,#48]
-	stp	d14,d15,[sp,#64]
-
-	cbz	$is_base2_26,.Lbase2_64_neon
-
-	ldp	w10,w11,[$ctx]		// load hash value base 2^26
-	ldp	w12,w13,[$ctx,#8]
-	ldr	w14,[$ctx,#16]
-
-	tst	$len,#31
-	b.eq	.Leven_neon
-
-	ldp	$r0,$r1,[$ctx,#32]	// load key value
-
-	add	$h0,x10,x11,lsl#26	// base 2^26 -> base 2^64
-	lsr	$h1,x12,#12
-	adds	$h0,$h0,x12,lsl#52
-	add	$h1,$h1,x13,lsl#14
-	adc	$h1,$h1,xzr
-	lsr	$h2,x14,#24
-	adds	$h1,$h1,x14,lsl#40
-	adc	$d2,$h2,xzr		// can be partially reduced...
-
-	ldp	$d0,$d1,[$inp],#16	// load input
-	sub	$len,$len,#16
-	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
-
-#ifdef	__AARCH64EB__
-	rev	$d0,$d0
-	rev	$d1,$d1
-#endif
-	adds	$h0,$h0,$d0		// accumulate input
-	adcs	$h1,$h1,$d1
-	adc	$h2,$h2,$padbit
-
-	bl	poly1305_mult
-
-	and	x10,$h0,#0x03ffffff	// base 2^64 -> base 2^26
-	ubfx	x11,$h0,#26,#26
-	extr	x12,$h1,$h0,#52
-	and	x12,x12,#0x03ffffff
-	ubfx	x13,$h1,#14,#26
-	extr	x14,$h2,$h1,#40
-
-	b	.Leven_neon
-
-.align	4
-.Lbase2_64_neon:
-	ldp	$r0,$r1,[$ctx,#32]	// load key value
-
-	ldp	$h0,$h1,[$ctx]		// load hash value base 2^64
-	ldr	$h2,[$ctx,#16]
-
-	tst	$len,#31
-	b.eq	.Linit_neon
-
-	ldp	$d0,$d1,[$inp],#16	// load input
-	sub	$len,$len,#16
-	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
-#ifdef	__AARCH64EB__
-	rev	$d0,$d0
-	rev	$d1,$d1
-#endif
-	adds	$h0,$h0,$d0		// accumulate input
-	adcs	$h1,$h1,$d1
-	adc	$h2,$h2,$padbit
-
-	bl	poly1305_mult
-
-.Linit_neon:
-	ldr	w17,[$ctx,#48]		// first table element
-	and	x10,$h0,#0x03ffffff	// base 2^64 -> base 2^26
-	ubfx	x11,$h0,#26,#26
-	extr	x12,$h1,$h0,#52
-	and	x12,x12,#0x03ffffff
-	ubfx	x13,$h1,#14,#26
-	extr	x14,$h2,$h1,#40
-
-	cmp	w17,#-1			// is value impossible?
-	b.ne	.Leven_neon
-
-	fmov	${H0},x10
-	fmov	${H1},x11
-	fmov	${H2},x12
-	fmov	${H3},x13
-	fmov	${H4},x14
-
-	////////////////////////////////// initialize r^n table
-	mov	$h0,$r0			// r^1
-	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
-	mov	$h1,$r1
-	mov	$h2,xzr
-	add	$ctx,$ctx,#48+12
-	bl	poly1305_splat
-
-	bl	poly1305_mult		// r^2
-	sub	$ctx,$ctx,#4
-	bl	poly1305_splat
-
-	bl	poly1305_mult		// r^3
-	sub	$ctx,$ctx,#4
-	bl	poly1305_splat
-
-	bl	poly1305_mult		// r^4
-	sub	$ctx,$ctx,#4
-	bl	poly1305_splat
-	sub	$ctx,$ctx,#48		// restore original $ctx
-	b	.Ldo_neon
-
-.align	4
-.Leven_neon:
-	fmov	${H0},x10
-	fmov	${H1},x11
-	fmov	${H2},x12
-	fmov	${H3},x13
-	fmov	${H4},x14
-
-.Ldo_neon:
-	ldp	x8,x12,[$inp,#32]	// inp[2:3]
-	subs	$len,$len,#64
-	ldp	x9,x13,[$inp,#48]
-	add	$in2,$inp,#96
-	adrp	$zeros,.Lzeros
-	add	$zeros,$zeros,#:lo12:.Lzeros
-
-	lsl	$padbit,$padbit,#24
-	add	x15,$ctx,#48
-
-#ifdef	__AARCH64EB__
-	rev	x8,x8
-	rev	x12,x12
-	rev	x9,x9
-	rev	x13,x13
-#endif
-	and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-	and	x5,x9,#0x03ffffff
-	ubfx	x6,x8,#26,#26
-	ubfx	x7,x9,#26,#26
-	add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-	extr	x8,x12,x8,#52
-	extr	x9,x13,x9,#52
-	add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-	fmov	$IN23_0,x4
-	and	x8,x8,#0x03ffffff
-	and	x9,x9,#0x03ffffff
-	ubfx	x10,x12,#14,#26
-	ubfx	x11,x13,#14,#26
-	add	x12,$padbit,x12,lsr#40
-	add	x13,$padbit,x13,lsr#40
-	add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-	fmov	$IN23_1,x6
-	add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-	add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-	fmov	$IN23_2,x8
-	fmov	$IN23_3,x10
-	fmov	$IN23_4,x12
-
-	ldp	x8,x12,[$inp],#16	// inp[0:1]
-	ldp	x9,x13,[$inp],#48
-
-	ld1	{$R0,$R1,$S1,$R2},[x15],#64
-	ld1	{$S2,$R3,$S3,$R4},[x15],#64
-	ld1	{$S4},[x15]
-
-#ifdef	__AARCH64EB__
-	rev	x8,x8
-	rev	x12,x12
-	rev	x9,x9
-	rev	x13,x13
-#endif
-	and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-	and	x5,x9,#0x03ffffff
-	ubfx	x6,x8,#26,#26
-	ubfx	x7,x9,#26,#26
-	add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-	extr	x8,x12,x8,#52
-	extr	x9,x13,x9,#52
-	add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-	fmov	$IN01_0,x4
-	and	x8,x8,#0x03ffffff
-	and	x9,x9,#0x03ffffff
-	ubfx	x10,x12,#14,#26
-	ubfx	x11,x13,#14,#26
-	add	x12,$padbit,x12,lsr#40
-	add	x13,$padbit,x13,lsr#40
-	add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-	fmov	$IN01_1,x6
-	add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-	add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-	movi	$MASK.2d,#-1
-	fmov	$IN01_2,x8
-	fmov	$IN01_3,x10
-	fmov	$IN01_4,x12
-	ushr	$MASK.2d,$MASK.2d,#38
-
-	b.ls	.Lskip_loop
-
-.align	4
-.Loop_neon:
-	////////////////////////////////////////////////////////////////
-	// ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
-	// ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
-	//   \___________________/
-	// ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
-	// ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
-	//   \___________________/ \____________________/
-	//
-	// Note that we start with inp[2:3]*r^2. This is because it
-	// doesn't depend on reduction in previous iteration.
-	////////////////////////////////////////////////////////////////
-	// d4 = h0*r4 + h1*r3   + h2*r2   + h3*r1   + h4*r0
-	// d3 = h0*r3 + h1*r2   + h2*r1   + h3*r0   + h4*5*r4
-	// d2 = h0*r2 + h1*r1   + h2*r0   + h3*5*r4 + h4*5*r3
-	// d1 = h0*r1 + h1*r0   + h2*5*r4 + h3*5*r3 + h4*5*r2
-	// d0 = h0*r0 + h1*5*r4 + h2*5*r3 + h3*5*r2 + h4*5*r1
-
-	subs	$len,$len,#64
-	umull	$ACC4,$IN23_0,${R4}[2]
-	csel	$in2,$zeros,$in2,lo
-	umull	$ACC3,$IN23_0,${R3}[2]
-	umull	$ACC2,$IN23_0,${R2}[2]
-	 ldp	x8,x12,[$in2],#16	// inp[2:3] (or zero)
-	umull	$ACC1,$IN23_0,${R1}[2]
-	 ldp	x9,x13,[$in2],#48
-	umull	$ACC0,$IN23_0,${R0}[2]
-#ifdef	__AARCH64EB__
-	 rev	x8,x8
-	 rev	x12,x12
-	 rev	x9,x9
-	 rev	x13,x13
-#endif
-
-	umlal	$ACC4,$IN23_1,${R3}[2]
-	 and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-	umlal	$ACC3,$IN23_1,${R2}[2]
-	 and	x5,x9,#0x03ffffff
-	umlal	$ACC2,$IN23_1,${R1}[2]
-	 ubfx	x6,x8,#26,#26
-	umlal	$ACC1,$IN23_1,${R0}[2]
-	 ubfx	x7,x9,#26,#26
-	umlal	$ACC0,$IN23_1,${S4}[2]
-	 add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-
-	umlal	$ACC4,$IN23_2,${R2}[2]
-	 extr	x8,x12,x8,#52
-	umlal	$ACC3,$IN23_2,${R1}[2]
-	 extr	x9,x13,x9,#52
-	umlal	$ACC2,$IN23_2,${R0}[2]
-	 add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-	umlal	$ACC1,$IN23_2,${S4}[2]
-	 fmov	$IN23_0,x4
-	umlal	$ACC0,$IN23_2,${S3}[2]
-	 and	x8,x8,#0x03ffffff
-
-	umlal	$ACC4,$IN23_3,${R1}[2]
-	 and	x9,x9,#0x03ffffff
-	umlal	$ACC3,$IN23_3,${R0}[2]
-	 ubfx	x10,x12,#14,#26
-	umlal	$ACC2,$IN23_3,${S4}[2]
-	 ubfx	x11,x13,#14,#26
-	umlal	$ACC1,$IN23_3,${S3}[2]
-	 add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-	umlal	$ACC0,$IN23_3,${S2}[2]
-	 fmov	$IN23_1,x6
-
-	add	$IN01_2,$IN01_2,$H2
-	 add	x12,$padbit,x12,lsr#40
-	umlal	$ACC4,$IN23_4,${R0}[2]
-	 add	x13,$padbit,x13,lsr#40
-	umlal	$ACC3,$IN23_4,${S4}[2]
-	 add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-	umlal	$ACC2,$IN23_4,${S3}[2]
-	 add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-	umlal	$ACC1,$IN23_4,${S2}[2]
-	 fmov	$IN23_2,x8
-	umlal	$ACC0,$IN23_4,${S1}[2]
-	 fmov	$IN23_3,x10
-
-	////////////////////////////////////////////////////////////////
-	// (hash+inp[0:1])*r^4 and accumulate
-
-	add	$IN01_0,$IN01_0,$H0
-	 fmov	$IN23_4,x12
-	umlal	$ACC3,$IN01_2,${R1}[0]
-	 ldp	x8,x12,[$inp],#16	// inp[0:1]
-	umlal	$ACC0,$IN01_2,${S3}[0]
-	 ldp	x9,x13,[$inp],#48
-	umlal	$ACC4,$IN01_2,${R2}[0]
-	umlal	$ACC1,$IN01_2,${S4}[0]
-	umlal	$ACC2,$IN01_2,${R0}[0]
-#ifdef	__AARCH64EB__
-	 rev	x8,x8
-	 rev	x12,x12
-	 rev	x9,x9
-	 rev	x13,x13
-#endif
-
-	add	$IN01_1,$IN01_1,$H1
-	umlal	$ACC3,$IN01_0,${R3}[0]
-	umlal	$ACC4,$IN01_0,${R4}[0]
-	 and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
-	umlal	$ACC2,$IN01_0,${R2}[0]
-	 and	x5,x9,#0x03ffffff
-	umlal	$ACC0,$IN01_0,${R0}[0]
-	 ubfx	x6,x8,#26,#26
-	umlal	$ACC1,$IN01_0,${R1}[0]
-	 ubfx	x7,x9,#26,#26
-
-	add	$IN01_3,$IN01_3,$H3
-	 add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
-	umlal	$ACC3,$IN01_1,${R2}[0]
-	 extr	x8,x12,x8,#52
-	umlal	$ACC4,$IN01_1,${R3}[0]
-	 extr	x9,x13,x9,#52
-	umlal	$ACC0,$IN01_1,${S4}[0]
-	 add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
-	umlal	$ACC2,$IN01_1,${R1}[0]
-	 fmov	$IN01_0,x4
-	umlal	$ACC1,$IN01_1,${R0}[0]
-	 and	x8,x8,#0x03ffffff
-
-	add	$IN01_4,$IN01_4,$H4
-	 and	x9,x9,#0x03ffffff
-	umlal	$ACC3,$IN01_3,${R0}[0]
-	 ubfx	x10,x12,#14,#26
-	umlal	$ACC0,$IN01_3,${S2}[0]
-	 ubfx	x11,x13,#14,#26
-	umlal	$ACC4,$IN01_3,${R1}[0]
-	 add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
-	umlal	$ACC1,$IN01_3,${S3}[0]
-	 fmov	$IN01_1,x6
-	umlal	$ACC2,$IN01_3,${S4}[0]
-	 add	x12,$padbit,x12,lsr#40
-
-	umlal	$ACC3,$IN01_4,${S4}[0]
-	 add	x13,$padbit,x13,lsr#40
-	umlal	$ACC0,$IN01_4,${S1}[0]
-	 add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
-	umlal	$ACC4,$IN01_4,${R0}[0]
-	 add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
-	umlal	$ACC1,$IN01_4,${S2}[0]
-	 fmov	$IN01_2,x8
-	umlal	$ACC2,$IN01_4,${S3}[0]
-	 fmov	$IN01_3,x10
-	 fmov	$IN01_4,x12
-
-	/////////////////////////////////////////////////////////////////
-	// lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
-	// and P. Schwabe
-	//
-	// [see discussion in poly1305-armv4 module]
-
-	ushr	$T0.2d,$ACC3,#26
-	xtn	$H3,$ACC3
-	 ushr	$T1.2d,$ACC0,#26
-	 and	$ACC0,$ACC0,$MASK.2d
-	add	$ACC4,$ACC4,$T0.2d	// h3 -> h4
-	bic	$H3,#0xfc,lsl#24	// &=0x03ffffff
-	 add	$ACC1,$ACC1,$T1.2d	// h0 -> h1
-
-	ushr	$T0.2d,$ACC4,#26
-	xtn	$H4,$ACC4
-	 ushr	$T1.2d,$ACC1,#26
-	 xtn	$H1,$ACC1
-	bic	$H4,#0xfc,lsl#24
-	 add	$ACC2,$ACC2,$T1.2d	// h1 -> h2
-
-	add	$ACC0,$ACC0,$T0.2d
-	shl	$T0.2d,$T0.2d,#2
-	 shrn	$T1.2s,$ACC2,#26
-	 xtn	$H2,$ACC2
-	add	$ACC0,$ACC0,$T0.2d	// h4 -> h0
-	 bic	$H1,#0xfc,lsl#24
-	 add	$H3,$H3,$T1.2s		// h2 -> h3
-	 bic	$H2,#0xfc,lsl#24
-
-	shrn	$T0.2s,$ACC0,#26
-	xtn	$H0,$ACC0
-	 ushr	$T1.2s,$H3,#26
-	 bic	$H3,#0xfc,lsl#24
-	 bic	$H0,#0xfc,lsl#24
-	add	$H1,$H1,$T0.2s		// h0 -> h1
-	 add	$H4,$H4,$T1.2s		// h3 -> h4
-
-	b.hi	.Loop_neon
-
-.Lskip_loop:
-	dup	$IN23_2,${IN23_2}[0]
-	add	$IN01_2,$IN01_2,$H2
-
-	////////////////////////////////////////////////////////////////
-	// multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
-
-	adds	$len,$len,#32
-	b.ne	.Long_tail
-
-	dup	$IN23_2,${IN01_2}[0]
-	add	$IN23_0,$IN01_0,$H0
-	add	$IN23_3,$IN01_3,$H3
-	add	$IN23_1,$IN01_1,$H1
-	add	$IN23_4,$IN01_4,$H4
-
-.Long_tail:
-	dup	$IN23_0,${IN23_0}[0]
-	umull2	$ACC0,$IN23_2,${S3}
-	umull2	$ACC3,$IN23_2,${R1}
-	umull2	$ACC4,$IN23_2,${R2}
-	umull2	$ACC2,$IN23_2,${R0}
-	umull2	$ACC1,$IN23_2,${S4}
-
-	dup	$IN23_1,${IN23_1}[0]
-	umlal2	$ACC0,$IN23_0,${R0}
-	umlal2	$ACC2,$IN23_0,${R2}
-	umlal2	$ACC3,$IN23_0,${R3}
-	umlal2	$ACC4,$IN23_0,${R4}
-	umlal2	$ACC1,$IN23_0,${R1}
-
-	dup	$IN23_3,${IN23_3}[0]
-	umlal2	$ACC0,$IN23_1,${S4}
-	umlal2	$ACC3,$IN23_1,${R2}
-	umlal2	$ACC2,$IN23_1,${R1}
-	umlal2	$ACC4,$IN23_1,${R3}
-	umlal2	$ACC1,$IN23_1,${R0}
-
-	dup	$IN23_4,${IN23_4}[0]
-	umlal2	$ACC3,$IN23_3,${R0}
-	umlal2	$ACC4,$IN23_3,${R1}
-	umlal2	$ACC0,$IN23_3,${S2}
-	umlal2	$ACC1,$IN23_3,${S3}
-	umlal2	$ACC2,$IN23_3,${S4}
-
-	umlal2	$ACC3,$IN23_4,${S4}
-	umlal2	$ACC0,$IN23_4,${S1}
-	umlal2	$ACC4,$IN23_4,${R0}
-	umlal2	$ACC1,$IN23_4,${S2}
-	umlal2	$ACC2,$IN23_4,${S3}
-
-	b.eq	.Lshort_tail
-
-	////////////////////////////////////////////////////////////////
-	// (hash+inp[0:1])*r^4:r^3 and accumulate
-
-	add	$IN01_0,$IN01_0,$H0
-	umlal	$ACC3,$IN01_2,${R1}
-	umlal	$ACC0,$IN01_2,${S3}
-	umlal	$ACC4,$IN01_2,${R2}
-	umlal	$ACC1,$IN01_2,${S4}
-	umlal	$ACC2,$IN01_2,${R0}
-
-	add	$IN01_1,$IN01_1,$H1
-	umlal	$ACC3,$IN01_0,${R3}
-	umlal	$ACC0,$IN01_0,${R0}
-	umlal	$ACC4,$IN01_0,${R4}
-	umlal	$ACC1,$IN01_0,${R1}
-	umlal	$ACC2,$IN01_0,${R2}
-
-	add	$IN01_3,$IN01_3,$H3
-	umlal	$ACC3,$IN01_1,${R2}
-	umlal	$ACC0,$IN01_1,${S4}
-	umlal	$ACC4,$IN01_1,${R3}
-	umlal	$ACC1,$IN01_1,${R0}
-	umlal	$ACC2,$IN01_1,${R1}
-
-	add	$IN01_4,$IN01_4,$H4
-	umlal	$ACC3,$IN01_3,${R0}
-	umlal	$ACC0,$IN01_3,${S2}
-	umlal	$ACC4,$IN01_3,${R1}
-	umlal	$ACC1,$IN01_3,${S3}
-	umlal	$ACC2,$IN01_3,${S4}
-
-	umlal	$ACC3,$IN01_4,${S4}
-	umlal	$ACC0,$IN01_4,${S1}
-	umlal	$ACC4,$IN01_4,${R0}
-	umlal	$ACC1,$IN01_4,${S2}
-	umlal	$ACC2,$IN01_4,${S3}
-
-.Lshort_tail:
-	////////////////////////////////////////////////////////////////
-	// horizontal add
-
-	addp	$ACC3,$ACC3,$ACC3
-	 ldp	d8,d9,[sp,#16]		// meet ABI requirements
-	addp	$ACC0,$ACC0,$ACC0
-	 ldp	d10,d11,[sp,#32]
-	addp	$ACC4,$ACC4,$ACC4
-	 ldp	d12,d13,[sp,#48]
-	addp	$ACC1,$ACC1,$ACC1
-	 ldp	d14,d15,[sp,#64]
-	addp	$ACC2,$ACC2,$ACC2
-	 ldr	x30,[sp,#8]
-
-	////////////////////////////////////////////////////////////////
-	// lazy reduction, but without narrowing
-
-	ushr	$T0.2d,$ACC3,#26
-	and	$ACC3,$ACC3,$MASK.2d
-	 ushr	$T1.2d,$ACC0,#26
-	 and	$ACC0,$ACC0,$MASK.2d
-
-	add	$ACC4,$ACC4,$T0.2d	// h3 -> h4
-	 add	$ACC1,$ACC1,$T1.2d	// h0 -> h1
-
-	ushr	$T0.2d,$ACC4,#26
-	and	$ACC4,$ACC4,$MASK.2d
-	 ushr	$T1.2d,$ACC1,#26
-	 and	$ACC1,$ACC1,$MASK.2d
-	 add	$ACC2,$ACC2,$T1.2d	// h1 -> h2
-
-	add	$ACC0,$ACC0,$T0.2d
-	shl	$T0.2d,$T0.2d,#2
-	 ushr	$T1.2d,$ACC2,#26
-	 and	$ACC2,$ACC2,$MASK.2d
-	add	$ACC0,$ACC0,$T0.2d	// h4 -> h0
-	 add	$ACC3,$ACC3,$T1.2d	// h2 -> h3
-
-	ushr	$T0.2d,$ACC0,#26
-	and	$ACC0,$ACC0,$MASK.2d
-	 ushr	$T1.2d,$ACC3,#26
-	 and	$ACC3,$ACC3,$MASK.2d
-	add	$ACC1,$ACC1,$T0.2d	// h0 -> h1
-	 add	$ACC4,$ACC4,$T1.2d	// h3 -> h4
-
-	////////////////////////////////////////////////////////////////
-	// write the result, can be partially reduced
-
-	st4	{$ACC0,$ACC1,$ACC2,$ACC3}[0],[$ctx],#16
-	mov	x4,#1
-	st1	{$ACC4}[0],[$ctx]
-	str	x4,[$ctx,#8]		// set is_base2_26
-
-	ldr	x29,[sp],#80
-	 .inst	0xd50323bf		// autiasp
-	ret
-.size	poly1305_blocks_neon,.-poly1305_blocks_neon
-
-.pushsection .rodata
-.align	5
-.Lzeros:
-.long	0,0,0,0,0,0,0,0
-.asciz	"Poly1305 for ARMv8, CRYPTOGAMS by \@dot-asm"
-.popsection
-
-.align	2
-#if !defined(__KERNEL__) && !defined(_WIN64)
-.comm	OPENSSL_armcap_P,4,4
-.hidden	OPENSSL_armcap_P
-#endif
-___
-
-foreach (split("\n",$code)) {
-	s/\b(shrn\s+v[0-9]+)\.[24]d/$1.2s/			or
-	s/\b(fmov\s+)v([0-9]+)[^,]*,\s*x([0-9]+)/$1d$2,x$3/	or
-	(m/\bdup\b/ and (s/\.[24]s/.2d/g or 1))			or
-	(m/\b(eor|and)/ and (s/\.[248][sdh]/.16b/g or 1))	or
-	(m/\bum(ul|la)l\b/ and (s/\.4s/.2s/g or 1))		or
-	(m/\bum(ul|la)l2\b/ and (s/\.2s/.4s/g or 1))		or
-	(m/\bst[1-4]\s+{[^}]+}\[/ and (s/\.[24]d/.s/g or 1));
-
-	s/\.[124]([sd])\[/.$1\[/;
-	s/w#x([0-9]+)/w$1/g;
-
-	print $_,"\n";
-}
-close STDOUT;
diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
deleted file mode 100644
index 18883ea438f3..000000000000
--- a/arch/arm64/crypto/poly1305-glue.c
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OpenSSL/Cryptogams accelerated Poly1305 transform for arm64
- *
- * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
-#include <crypto/algapi.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/poly1305.h>
-#include <crypto/internal/simd.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/jump_label.h>
-#include <linux/module.h>
-
-asmlinkage void poly1305_init_arm64(void *state, const u8 *key);
-asmlinkage void poly1305_blocks(void *state, const u8 *src, u32 len, u32 hibit);
-asmlinkage void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit);
-asmlinkage void poly1305_emit(void *state, u8 *digest, const u32 *nonce);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
-{
-	poly1305_init_arm64(&dctx->h, key);
-	dctx->s[0] = get_unaligned_le32(key + 16);
-	dctx->s[1] = get_unaligned_le32(key + 20);
-	dctx->s[2] = get_unaligned_le32(key + 24);
-	dctx->s[3] = get_unaligned_le32(key + 28);
-	dctx->buflen = 0;
-}
-EXPORT_SYMBOL(poly1305_init_arch);
-
-static int neon_poly1305_init(struct shash_desc *desc)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	dctx->buflen = 0;
-	dctx->rset = 0;
-	dctx->sset = false;
-
-	return 0;
-}
-
-static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-				 u32 len, u32 hibit, bool do_neon)
-{
-	if (unlikely(!dctx->sset)) {
-		if (!dctx->rset) {
-			poly1305_init_arm64(&dctx->h, src);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->rset = 1;
-		}
-		if (len >= POLY1305_BLOCK_SIZE) {
-			dctx->s[0] = get_unaligned_le32(src +  0);
-			dctx->s[1] = get_unaligned_le32(src +  4);
-			dctx->s[2] = get_unaligned_le32(src +  8);
-			dctx->s[3] = get_unaligned_le32(src + 12);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->sset = true;
-		}
-		if (len < POLY1305_BLOCK_SIZE)
-			return;
-	}
-
-	len &= ~(POLY1305_BLOCK_SIZE - 1);
-
-	if (static_branch_likely(&have_neon) && likely(do_neon))
-		poly1305_blocks_neon(&dctx->h, src, len, hibit);
-	else
-		poly1305_blocks(&dctx->h, src, len, hibit);
-}
-
-static void neon_poly1305_do_update(struct poly1305_desc_ctx *dctx,
-				    const u8 *src, u32 len, bool do_neon)
-{
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		len -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			neon_poly1305_blocks(dctx, dctx->buf,
-					     POLY1305_BLOCK_SIZE, 1, false);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(len >= POLY1305_BLOCK_SIZE)) {
-		neon_poly1305_blocks(dctx, src, len, 1, do_neon);
-		src += round_down(len, POLY1305_BLOCK_SIZE);
-		len %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(len)) {
-		dctx->buflen = len;
-		memcpy(dctx->buf, src, len);
-	}
-}
-
-static int neon_poly1305_update(struct shash_desc *desc,
-				const u8 *src, unsigned int srclen)
-{
-	bool do_neon = crypto_simd_usable() && srclen > 128;
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (static_branch_likely(&have_neon) && do_neon)
-		kernel_neon_begin();
-	neon_poly1305_do_update(dctx, src, srclen, do_neon);
-	if (static_branch_likely(&have_neon) && do_neon)
-		kernel_neon_end();
-	return 0;
-}
-
-void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-			  unsigned int nbytes)
-{
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		nbytes -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 1);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
-
-		if (static_branch_likely(&have_neon) && crypto_simd_usable()) {
-			do {
-				unsigned int todo = min_t(unsigned int, len, SZ_4K);
-
-				kernel_neon_begin();
-				poly1305_blocks_neon(&dctx->h, src, todo, 1);
-				kernel_neon_end();
-
-				len -= todo;
-				src += todo;
-			} while (len);
-		} else {
-			poly1305_blocks(&dctx->h, src, len, 1);
-			src += len;
-		}
-		nbytes %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(nbytes)) {
-		dctx->buflen = nbytes;
-		memcpy(dctx->buf, src, nbytes);
-	}
-}
-EXPORT_SYMBOL(poly1305_update_arch);
-
-void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
-{
-	if (unlikely(dctx->buflen)) {
-		dctx->buf[dctx->buflen++] = 1;
-		memset(dctx->buf + dctx->buflen, 0,
-		       POLY1305_BLOCK_SIZE - dctx->buflen);
-		poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-	}
-
-	poly1305_emit(&dctx->h, dst, dctx->s);
-	memzero_explicit(dctx, sizeof(*dctx));
-}
-EXPORT_SYMBOL(poly1305_final_arch);
-
-static int neon_poly1305_final(struct shash_desc *desc, u8 *dst)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (unlikely(!dctx->sset))
-		return -ENOKEY;
-
-	poly1305_final_arch(dctx, dst);
-	return 0;
-}
-
-static struct shash_alg neon_poly1305_alg = {
-	.init			= neon_poly1305_init,
-	.update			= neon_poly1305_update,
-	.final			= neon_poly1305_final,
-	.digestsize		= POLY1305_DIGEST_SIZE,
-	.descsize		= sizeof(struct poly1305_desc_ctx),
-
-	.base.cra_name		= "poly1305",
-	.base.cra_driver_name	= "poly1305-neon",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-};
-
-static int __init neon_poly1305_mod_init(void)
-{
-	if (!cpu_have_named_feature(ASIMD))
-		return 0;
-
-	static_branch_enable(&have_neon);
-
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shash(&neon_poly1305_alg) : 0;
-}
-
-static void __exit neon_poly1305_mod_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_HASH) && cpu_have_named_feature(ASIMD))
-		crypto_unregister_shash(&neon_poly1305_alg);
-}
-
-module_init(neon_poly1305_mod_init);
-module_exit(neon_poly1305_mod_exit);
-
-MODULE_DESCRIPTION("Poly1305 transform using NEON instructions");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("poly1305");
-MODULE_ALIAS_CRYPTO("poly1305-neon");
diff --git a/arch/arm64/crypto/polyval-ce-core.S b/arch/arm64/crypto/polyval-ce-core.S
deleted file mode 100644
index b5326540d2e3..000000000000
--- a/arch/arm64/crypto/polyval-ce-core.S
+++ /dev/null
@@ -1,361 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Implementation of POLYVAL using ARMv8 Crypto Extensions.
- *
- * Copyright 2021 Google LLC
- */
-/*
- * This is an efficient implementation of POLYVAL using ARMv8 Crypto Extensions
- * It works on 8 blocks at a time, by precomputing the first 8 keys powers h^8,
- * ..., h^1 in the POLYVAL finite field. This precomputation allows us to split
- * finite field multiplication into two steps.
- *
- * In the first step, we consider h^i, m_i as normal polynomials of degree less
- * than 128. We then compute p(x) = h^8m_0 + ... + h^1m_7 where multiplication
- * is simply polynomial multiplication.
- *
- * In the second step, we compute the reduction of p(x) modulo the finite field
- * modulus g(x) = x^128 + x^127 + x^126 + x^121 + 1.
- *
- * This two step process is equivalent to computing h^8m_0 + ... + h^1m_7 where
- * multiplication is finite field multiplication. The advantage is that the
- * two-step process  only requires 1 finite field reduction for every 8
- * polynomial multiplications. Further parallelism is gained by interleaving the
- * multiplications and polynomial reductions.
- */
-
-#include <linux/linkage.h>
-#define STRIDE_BLOCKS 8
-
-KEY_POWERS	.req	x0
-MSG		.req	x1
-BLOCKS_LEFT	.req	x2
-ACCUMULATOR	.req	x3
-KEY_START	.req	x10
-EXTRA_BYTES	.req	x11
-TMP	.req	x13
-
-M0	.req	v0
-M1	.req	v1
-M2	.req	v2
-M3	.req	v3
-M4	.req	v4
-M5	.req	v5
-M6	.req	v6
-M7	.req	v7
-KEY8	.req	v8
-KEY7	.req	v9
-KEY6	.req	v10
-KEY5	.req	v11
-KEY4	.req	v12
-KEY3	.req	v13
-KEY2	.req	v14
-KEY1	.req	v15
-PL	.req	v16
-PH	.req	v17
-TMP_V	.req	v18
-LO	.req	v20
-MI	.req	v21
-HI	.req	v22
-SUM	.req	v23
-GSTAR	.req	v24
-
-	.text
-
-	.arch	armv8-a+crypto
-	.align	4
-
-.Lgstar:
-	.quad	0xc200000000000000, 0xc200000000000000
-
-/*
- * Computes the product of two 128-bit polynomials in X and Y and XORs the
- * components of the 256-bit product into LO, MI, HI.
- *
- * Given:
- *  X = [X_1 : X_0]
- *  Y = [Y_1 : Y_0]
- *
- * We compute:
- *  LO += X_0 * Y_0
- *  MI += (X_0 + X_1) * (Y_0 + Y_1)
- *  HI += X_1 * Y_1
- *
- * Later, the 256-bit result can be extracted as:
- *   [HI_1 : HI_0 + HI_1 + MI_1 + LO_1 : LO_1 + HI_0 + MI_0 + LO_0 : LO_0]
- * This step is done when computing the polynomial reduction for efficiency
- * reasons.
- *
- * Karatsuba multiplication is used instead of Schoolbook multiplication because
- * it was found to be slightly faster on ARM64 CPUs.
- *
- */
-.macro karatsuba1 X Y
-	X .req \X
-	Y .req \Y
-	ext	v25.16b, X.16b, X.16b, #8
-	ext	v26.16b, Y.16b, Y.16b, #8
-	eor	v25.16b, v25.16b, X.16b
-	eor	v26.16b, v26.16b, Y.16b
-	pmull2	v28.1q, X.2d, Y.2d
-	pmull	v29.1q, X.1d, Y.1d
-	pmull	v27.1q, v25.1d, v26.1d
-	eor	HI.16b, HI.16b, v28.16b
-	eor	LO.16b, LO.16b, v29.16b
-	eor	MI.16b, MI.16b, v27.16b
-	.unreq X
-	.unreq Y
-.endm
-
-/*
- * Same as karatsuba1, except overwrites HI, LO, MI rather than XORing into
- * them.
- */
-.macro karatsuba1_store X Y
-	X .req \X
-	Y .req \Y
-	ext	v25.16b, X.16b, X.16b, #8
-	ext	v26.16b, Y.16b, Y.16b, #8
-	eor	v25.16b, v25.16b, X.16b
-	eor	v26.16b, v26.16b, Y.16b
-	pmull2	HI.1q, X.2d, Y.2d
-	pmull	LO.1q, X.1d, Y.1d
-	pmull	MI.1q, v25.1d, v26.1d
-	.unreq X
-	.unreq Y
-.endm
-
-/*
- * Computes the 256-bit polynomial represented by LO, HI, MI. Stores
- * the result in PL, PH.
- * [PH : PL] =
- *   [HI_1 : HI_1 + HI_0 + MI_1 + LO_1 : HI_0 + MI_0 + LO_1 + LO_0 : LO_0]
- */
-.macro karatsuba2
-	// v4 = [HI_1 + MI_1 : HI_0 + MI_0]
-	eor	v4.16b, HI.16b, MI.16b
-	// v4 = [HI_1 + MI_1 + LO_1 : HI_0 + MI_0 + LO_0]
-	eor	v4.16b, v4.16b, LO.16b
-	// v5 = [HI_0 : LO_1]
-	ext	v5.16b, LO.16b, HI.16b, #8
-	// v4 = [HI_1 + HI_0 + MI_1 + LO_1 : HI_0 + MI_0 + LO_1 + LO_0]
-	eor	v4.16b, v4.16b, v5.16b
-	// HI = [HI_0 : HI_1]
-	ext	HI.16b, HI.16b, HI.16b, #8
-	// LO = [LO_0 : LO_1]
-	ext	LO.16b, LO.16b, LO.16b, #8
-	// PH = [HI_1 : HI_1 + HI_0 + MI_1 + LO_1]
-	ext	PH.16b, v4.16b, HI.16b, #8
-	// PL = [HI_0 + MI_0 + LO_1 + LO_0 : LO_0]
-	ext	PL.16b, LO.16b, v4.16b, #8
-.endm
-
-/*
- * Computes the 128-bit reduction of PH : PL. Stores the result in dest.
- *
- * This macro computes p(x) mod g(x) where p(x) is in montgomery form and g(x) =
- * x^128 + x^127 + x^126 + x^121 + 1.
- *
- * We have a 256-bit polynomial PH : PL = P_3 : P_2 : P_1 : P_0 that is the
- * product of two 128-bit polynomials in Montgomery form.  We need to reduce it
- * mod g(x).  Also, since polynomials in Montgomery form have an "extra" factor
- * of x^128, this product has two extra factors of x^128.  To get it back into
- * Montgomery form, we need to remove one of these factors by dividing by x^128.
- *
- * To accomplish both of these goals, we add multiples of g(x) that cancel out
- * the low 128 bits P_1 : P_0, leaving just the high 128 bits. Since the low
- * bits are zero, the polynomial division by x^128 can be done by right
- * shifting.
- *
- * Since the only nonzero term in the low 64 bits of g(x) is the constant term,
- * the multiple of g(x) needed to cancel out P_0 is P_0 * g(x).  The CPU can
- * only do 64x64 bit multiplications, so split P_0 * g(x) into x^128 * P_0 +
- * x^64 * g*(x) * P_0 + P_0, where g*(x) is bits 64-127 of g(x).  Adding this to
- * the original polynomial gives P_3 : P_2 + P_0 + T_1 : P_1 + T_0 : 0, where T
- * = T_1 : T_0 = g*(x) * P_0.  Thus, bits 0-63 got "folded" into bits 64-191.
- *
- * Repeating this same process on the next 64 bits "folds" bits 64-127 into bits
- * 128-255, giving the answer in bits 128-255. This time, we need to cancel P_1
- * + T_0 in bits 64-127. The multiple of g(x) required is (P_1 + T_0) * g(x) *
- * x^64. Adding this to our previous computation gives P_3 + P_1 + T_0 + V_1 :
- * P_2 + P_0 + T_1 + V_0 : 0 : 0, where V = V_1 : V_0 = g*(x) * (P_1 + T_0).
- *
- * So our final computation is:
- *   T = T_1 : T_0 = g*(x) * P_0
- *   V = V_1 : V_0 = g*(x) * (P_1 + T_0)
- *   p(x) / x^{128} mod g(x) = P_3 + P_1 + T_0 + V_1 : P_2 + P_0 + T_1 + V_0
- *
- * The implementation below saves a XOR instruction by computing P_1 + T_0 : P_0
- * + T_1 and XORing into dest, rather than separately XORing P_1 : P_0 and T_0 :
- * T_1 into dest.  This allows us to reuse P_1 + T_0 when computing V.
- */
-.macro montgomery_reduction dest
-	DEST .req \dest
-	// TMP_V = T_1 : T_0 = P_0 * g*(x)
-	pmull	TMP_V.1q, PL.1d, GSTAR.1d
-	// TMP_V = T_0 : T_1
-	ext	TMP_V.16b, TMP_V.16b, TMP_V.16b, #8
-	// TMP_V = P_1 + T_0 : P_0 + T_1
-	eor	TMP_V.16b, PL.16b, TMP_V.16b
-	// PH = P_3 + P_1 + T_0 : P_2 + P_0 + T_1
-	eor	PH.16b, PH.16b, TMP_V.16b
-	// TMP_V = V_1 : V_0 = (P_1 + T_0) * g*(x)
-	pmull2	TMP_V.1q, TMP_V.2d, GSTAR.2d
-	eor	DEST.16b, PH.16b, TMP_V.16b
-	.unreq DEST
-.endm
-
-/*
- * Compute Polyval on 8 blocks.
- *
- * If reduce is set, also computes the montgomery reduction of the
- * previous full_stride call and XORs with the first message block.
- * (m_0 + REDUCE(PL, PH))h^8 + ... + m_7h^1.
- * I.e., the first multiplication uses m_0 + REDUCE(PL, PH) instead of m_0.
- *
- * Sets PL, PH.
- */
-.macro full_stride reduce
-	eor		LO.16b, LO.16b, LO.16b
-	eor		MI.16b, MI.16b, MI.16b
-	eor		HI.16b, HI.16b, HI.16b
-
-	ld1		{M0.16b, M1.16b, M2.16b, M3.16b}, [MSG], #64
-	ld1		{M4.16b, M5.16b, M6.16b, M7.16b}, [MSG], #64
-
-	karatsuba1 M7 KEY1
-	.if \reduce
-	pmull	TMP_V.1q, PL.1d, GSTAR.1d
-	.endif
-
-	karatsuba1 M6 KEY2
-	.if \reduce
-	ext	TMP_V.16b, TMP_V.16b, TMP_V.16b, #8
-	.endif
-
-	karatsuba1 M5 KEY3
-	.if \reduce
-	eor	TMP_V.16b, PL.16b, TMP_V.16b
-	.endif
-
-	karatsuba1 M4 KEY4
-	.if \reduce
-	eor	PH.16b, PH.16b, TMP_V.16b
-	.endif
-
-	karatsuba1 M3 KEY5
-	.if \reduce
-	pmull2	TMP_V.1q, TMP_V.2d, GSTAR.2d
-	.endif
-
-	karatsuba1 M2 KEY6
-	.if \reduce
-	eor	SUM.16b, PH.16b, TMP_V.16b
-	.endif
-
-	karatsuba1 M1 KEY7
-	eor	M0.16b, M0.16b, SUM.16b
-
-	karatsuba1 M0 KEY8
-	karatsuba2
-.endm
-
-/*
- * Handle any extra blocks after full_stride loop.
- */
-.macro partial_stride
-	add	KEY_POWERS, KEY_START, #(STRIDE_BLOCKS << 4)
-	sub	KEY_POWERS, KEY_POWERS, BLOCKS_LEFT, lsl #4
-	ld1	{KEY1.16b}, [KEY_POWERS], #16
-
-	ld1	{TMP_V.16b}, [MSG], #16
-	eor	SUM.16b, SUM.16b, TMP_V.16b
-	karatsuba1_store KEY1 SUM
-	sub	BLOCKS_LEFT, BLOCKS_LEFT, #1
-
-	tst	BLOCKS_LEFT, #4
-	beq	.Lpartial4BlocksDone
-	ld1	{M0.16b, M1.16b,  M2.16b, M3.16b}, [MSG], #64
-	ld1	{KEY8.16b, KEY7.16b, KEY6.16b,	KEY5.16b}, [KEY_POWERS], #64
-	karatsuba1 M0 KEY8
-	karatsuba1 M1 KEY7
-	karatsuba1 M2 KEY6
-	karatsuba1 M3 KEY5
-.Lpartial4BlocksDone:
-	tst	BLOCKS_LEFT, #2
-	beq	.Lpartial2BlocksDone
-	ld1	{M0.16b, M1.16b}, [MSG], #32
-	ld1	{KEY8.16b, KEY7.16b}, [KEY_POWERS], #32
-	karatsuba1 M0 KEY8
-	karatsuba1 M1 KEY7
-.Lpartial2BlocksDone:
-	tst	BLOCKS_LEFT, #1
-	beq	.LpartialDone
-	ld1	{M0.16b}, [MSG], #16
-	ld1	{KEY8.16b}, [KEY_POWERS], #16
-	karatsuba1 M0 KEY8
-.LpartialDone:
-	karatsuba2
-	montgomery_reduction SUM
-.endm
-
-/*
- * Perform montgomery multiplication in GF(2^128) and store result in op1.
- *
- * Computes op1*op2*x^{-128} mod x^128 + x^127 + x^126 + x^121 + 1
- * If op1, op2 are in montgomery form, this computes the montgomery
- * form of op1*op2.
- *
- * void pmull_polyval_mul(u8 *op1, const u8 *op2);
- */
-SYM_FUNC_START(pmull_polyval_mul)
-	adr	TMP, .Lgstar
-	ld1	{GSTAR.2d}, [TMP]
-	ld1	{v0.16b}, [x0]
-	ld1	{v1.16b}, [x1]
-	karatsuba1_store v0 v1
-	karatsuba2
-	montgomery_reduction SUM
-	st1	{SUM.16b}, [x0]
-	ret
-SYM_FUNC_END(pmull_polyval_mul)
-
-/*
- * Perform polynomial evaluation as specified by POLYVAL.  This computes:
- *	h^n * accumulator + h^n * m_0 + ... + h^1 * m_{n-1}
- * where n=nblocks, h is the hash key, and m_i are the message blocks.
- *
- * x0 - pointer to precomputed key powers h^8 ... h^1
- * x1 - pointer to message blocks
- * x2 - number of blocks to hash
- * x3 - pointer to accumulator
- *
- * void pmull_polyval_update(const struct polyval_ctx *ctx, const u8 *in,
- *			     size_t nblocks, u8 *accumulator);
- */
-SYM_FUNC_START(pmull_polyval_update)
-	adr	TMP, .Lgstar
-	mov	KEY_START, KEY_POWERS
-	ld1	{GSTAR.2d}, [TMP]
-	ld1	{SUM.16b}, [ACCUMULATOR]
-	subs	BLOCKS_LEFT, BLOCKS_LEFT, #STRIDE_BLOCKS
-	blt .LstrideLoopExit
-	ld1	{KEY8.16b, KEY7.16b, KEY6.16b, KEY5.16b}, [KEY_POWERS], #64
-	ld1	{KEY4.16b, KEY3.16b, KEY2.16b, KEY1.16b}, [KEY_POWERS], #64
-	full_stride 0
-	subs	BLOCKS_LEFT, BLOCKS_LEFT, #STRIDE_BLOCKS
-	blt .LstrideLoopExitReduce
-.LstrideLoop:
-	full_stride 1
-	subs	BLOCKS_LEFT, BLOCKS_LEFT, #STRIDE_BLOCKS
-	bge	.LstrideLoop
-.LstrideLoopExitReduce:
-	montgomery_reduction SUM
-.LstrideLoopExit:
-	adds	BLOCKS_LEFT, BLOCKS_LEFT, #STRIDE_BLOCKS
-	beq	.LskipPartial
-	partial_stride
-.LskipPartial:
-	st1	{SUM.16b}, [ACCUMULATOR]
-	ret
-SYM_FUNC_END(pmull_polyval_update)
diff --git a/arch/arm64/crypto/polyval-ce-glue.c b/arch/arm64/crypto/polyval-ce-glue.c
deleted file mode 100644
index 0a3b5718df85..000000000000
--- a/arch/arm64/crypto/polyval-ce-glue.c
+++ /dev/null
@@ -1,191 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Glue code for POLYVAL using ARMv8 Crypto Extensions
- *
- * Copyright (c) 2007 Nokia Siemens Networks - Mikko Herranen <mh1@iki.fi>
- * Copyright (c) 2009 Intel Corp.
- *   Author: Huang Ying <ying.huang@intel.com>
- * Copyright 2021 Google LLC
- */
-
-/*
- * Glue code based on ghash-clmulni-intel_glue.c.
- *
- * This implementation of POLYVAL uses montgomery multiplication accelerated by
- * ARMv8 Crypto Extensions instructions to implement the finite field operations.
- */
-
-#include <crypto/algapi.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/polyval.h>
-#include <linux/crypto.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/cpufeature.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#define NUM_KEY_POWERS	8
-
-struct polyval_tfm_ctx {
-	/*
-	 * These powers must be in the order h^8, ..., h^1.
-	 */
-	u8 key_powers[NUM_KEY_POWERS][POLYVAL_BLOCK_SIZE];
-};
-
-struct polyval_desc_ctx {
-	u8 buffer[POLYVAL_BLOCK_SIZE];
-	u32 bytes;
-};
-
-asmlinkage void pmull_polyval_update(const struct polyval_tfm_ctx *keys,
-	const u8 *in, size_t nblocks, u8 *accumulator);
-asmlinkage void pmull_polyval_mul(u8 *op1, const u8 *op2);
-
-static void internal_polyval_update(const struct polyval_tfm_ctx *keys,
-	const u8 *in, size_t nblocks, u8 *accumulator)
-{
-	if (likely(crypto_simd_usable())) {
-		kernel_neon_begin();
-		pmull_polyval_update(keys, in, nblocks, accumulator);
-		kernel_neon_end();
-	} else {
-		polyval_update_non4k(keys->key_powers[NUM_KEY_POWERS-1], in,
-			nblocks, accumulator);
-	}
-}
-
-static void internal_polyval_mul(u8 *op1, const u8 *op2)
-{
-	if (likely(crypto_simd_usable())) {
-		kernel_neon_begin();
-		pmull_polyval_mul(op1, op2);
-		kernel_neon_end();
-	} else {
-		polyval_mul_non4k(op1, op2);
-	}
-}
-
-static int polyval_arm64_setkey(struct crypto_shash *tfm,
-			const u8 *key, unsigned int keylen)
-{
-	struct polyval_tfm_ctx *tctx = crypto_shash_ctx(tfm);
-	int i;
-
-	if (keylen != POLYVAL_BLOCK_SIZE)
-		return -EINVAL;
-
-	memcpy(tctx->key_powers[NUM_KEY_POWERS-1], key, POLYVAL_BLOCK_SIZE);
-
-	for (i = NUM_KEY_POWERS-2; i >= 0; i--) {
-		memcpy(tctx->key_powers[i], key, POLYVAL_BLOCK_SIZE);
-		internal_polyval_mul(tctx->key_powers[i],
-				     tctx->key_powers[i+1]);
-	}
-
-	return 0;
-}
-
-static int polyval_arm64_init(struct shash_desc *desc)
-{
-	struct polyval_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	memset(dctx, 0, sizeof(*dctx));
-
-	return 0;
-}
-
-static int polyval_arm64_update(struct shash_desc *desc,
-			 const u8 *src, unsigned int srclen)
-{
-	struct polyval_desc_ctx *dctx = shash_desc_ctx(desc);
-	const struct polyval_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
-	u8 *pos;
-	unsigned int nblocks;
-	unsigned int n;
-
-	if (dctx->bytes) {
-		n = min(srclen, dctx->bytes);
-		pos = dctx->buffer + POLYVAL_BLOCK_SIZE - dctx->bytes;
-
-		dctx->bytes -= n;
-		srclen -= n;
-
-		while (n--)
-			*pos++ ^= *src++;
-
-		if (!dctx->bytes)
-			internal_polyval_mul(dctx->buffer,
-					    tctx->key_powers[NUM_KEY_POWERS-1]);
-	}
-
-	while (srclen >= POLYVAL_BLOCK_SIZE) {
-		/* allow rescheduling every 4K bytes */
-		nblocks = min(srclen, 4096U) / POLYVAL_BLOCK_SIZE;
-		internal_polyval_update(tctx, src, nblocks, dctx->buffer);
-		srclen -= nblocks * POLYVAL_BLOCK_SIZE;
-		src += nblocks * POLYVAL_BLOCK_SIZE;
-	}
-
-	if (srclen) {
-		dctx->bytes = POLYVAL_BLOCK_SIZE - srclen;
-		pos = dctx->buffer;
-		while (srclen--)
-			*pos++ ^= *src++;
-	}
-
-	return 0;
-}
-
-static int polyval_arm64_final(struct shash_desc *desc, u8 *dst)
-{
-	struct polyval_desc_ctx *dctx = shash_desc_ctx(desc);
-	const struct polyval_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
-
-	if (dctx->bytes) {
-		internal_polyval_mul(dctx->buffer,
-				     tctx->key_powers[NUM_KEY_POWERS-1]);
-	}
-
-	memcpy(dst, dctx->buffer, POLYVAL_BLOCK_SIZE);
-
-	return 0;
-}
-
-static struct shash_alg polyval_alg = {
-	.digestsize	= POLYVAL_DIGEST_SIZE,
-	.init		= polyval_arm64_init,
-	.update		= polyval_arm64_update,
-	.final		= polyval_arm64_final,
-	.setkey		= polyval_arm64_setkey,
-	.descsize	= sizeof(struct polyval_desc_ctx),
-	.base		= {
-		.cra_name		= "polyval",
-		.cra_driver_name	= "polyval-ce",
-		.cra_priority		= 200,
-		.cra_blocksize		= POLYVAL_BLOCK_SIZE,
-		.cra_ctxsize		= sizeof(struct polyval_tfm_ctx),
-		.cra_module		= THIS_MODULE,
-	},
-};
-
-static int __init polyval_ce_mod_init(void)
-{
-	return crypto_register_shash(&polyval_alg);
-}
-
-static void __exit polyval_ce_mod_exit(void)
-{
-	crypto_unregister_shash(&polyval_alg);
-}
-
-module_cpu_feature_match(PMULL, polyval_ce_mod_init)
-module_exit(polyval_ce_mod_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("POLYVAL hash function accelerated by ARMv8 Crypto Extensions");
-MODULE_ALIAS_CRYPTO("polyval");
-MODULE_ALIAS_CRYPTO("polyval-ce");
diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S
deleted file mode 100644
index 9b1f2d82a6fe..000000000000
--- a/arch/arm64/crypto/sha1-ce-core.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * sha1-ce-core.S - SHA-1 secure hash using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2014 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.arch		armv8-a+crypto
-
-	k0		.req	v0
-	k1		.req	v1
-	k2		.req	v2
-	k3		.req	v3
-
-	t0		.req	v4
-	t1		.req	v5
-
-	dga		.req	q6
-	dgav		.req	v6
-	dgb		.req	s7
-	dgbv		.req	v7
-
-	dg0q		.req	q12
-	dg0s		.req	s12
-	dg0v		.req	v12
-	dg1s		.req	s13
-	dg1v		.req	v13
-	dg2s		.req	s14
-
-	.macro		add_only, op, ev, rc, s0, dg1
-	.ifc		\ev, ev
-	add		t1.4s, v\s0\().4s, \rc\().4s
-	sha1h		dg2s, dg0s
-	.ifnb		\dg1
-	sha1\op		dg0q, \dg1, t0.4s
-	.else
-	sha1\op		dg0q, dg1s, t0.4s
-	.endif
-	.else
-	.ifnb		\s0
-	add		t0.4s, v\s0\().4s, \rc\().4s
-	.endif
-	sha1h		dg1s, dg0s
-	sha1\op		dg0q, dg2s, t1.4s
-	.endif
-	.endm
-
-	.macro		add_update, op, ev, rc, s0, s1, s2, s3, dg1
-	sha1su0		v\s0\().4s, v\s1\().4s, v\s2\().4s
-	add_only	\op, \ev, \rc, \s1, \dg1
-	sha1su1		v\s0\().4s, v\s3\().4s
-	.endm
-
-	.macro		loadrc, k, val, tmp
-	movz		\tmp, :abs_g0_nc:\val
-	movk		\tmp, :abs_g1:\val
-	dup		\k, \tmp
-	.endm
-
-	/*
-	 * int __sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src,
-	 *			   int blocks)
-	 */
-SYM_FUNC_START(__sha1_ce_transform)
-	/* load round constants */
-	loadrc		k0.4s, 0x5a827999, w6
-	loadrc		k1.4s, 0x6ed9eba1, w6
-	loadrc		k2.4s, 0x8f1bbcdc, w6
-	loadrc		k3.4s, 0xca62c1d6, w6
-
-	/* load state */
-	ld1		{dgav.4s}, [x0]
-	ldr		dgb, [x0, #16]
-
-	/* load sha1_ce_state::finalize */
-	ldr_l		w4, sha1_ce_offsetof_finalize, x4
-	ldr		w4, [x0, x4]
-
-	/* load input */
-0:	ld1		{v8.4s-v11.4s}, [x1], #64
-	sub		w2, w2, #1
-
-CPU_LE(	rev32		v8.16b, v8.16b		)
-CPU_LE(	rev32		v9.16b, v9.16b		)
-CPU_LE(	rev32		v10.16b, v10.16b	)
-CPU_LE(	rev32		v11.16b, v11.16b	)
-
-1:	add		t0.4s, v8.4s, k0.4s
-	mov		dg0v.16b, dgav.16b
-
-	add_update	c, ev, k0,  8,  9, 10, 11, dgb
-	add_update	c, od, k0,  9, 10, 11,  8
-	add_update	c, ev, k0, 10, 11,  8,  9
-	add_update	c, od, k0, 11,  8,  9, 10
-	add_update	c, ev, k1,  8,  9, 10, 11
-
-	add_update	p, od, k1,  9, 10, 11,  8
-	add_update	p, ev, k1, 10, 11,  8,  9
-	add_update	p, od, k1, 11,  8,  9, 10
-	add_update	p, ev, k1,  8,  9, 10, 11
-	add_update	p, od, k2,  9, 10, 11,  8
-
-	add_update	m, ev, k2, 10, 11,  8,  9
-	add_update	m, od, k2, 11,  8,  9, 10
-	add_update	m, ev, k2,  8,  9, 10, 11
-	add_update	m, od, k2,  9, 10, 11,  8
-	add_update	m, ev, k3, 10, 11,  8,  9
-
-	add_update	p, od, k3, 11,  8,  9, 10
-	add_only	p, ev, k3,  9
-	add_only	p, od, k3, 10
-	add_only	p, ev, k3, 11
-	add_only	p, od
-
-	/* update state */
-	add		dgbv.2s, dgbv.2s, dg1v.2s
-	add		dgav.4s, dgav.4s, dg0v.4s
-
-	cbz		w2, 2f
-	cond_yield	3f, x5, x6
-	b		0b
-
-	/*
-	 * Final block: add padding and total bit count.
-	 * Skip if the input size was not a round multiple of the block size,
-	 * the padding is handled by the C code in that case.
-	 */
-2:	cbz		x4, 3f
-	ldr_l		w4, sha1_ce_offsetof_count, x4
-	ldr		x4, [x0, x4]
-	movi		v9.2d, #0
-	mov		x8, #0x80000000
-	movi		v10.2d, #0
-	ror		x7, x4, #29		// ror(lsl(x4, 3), 32)
-	fmov		d8, x8
-	mov		x4, #0
-	mov		v11.d[0], xzr
-	mov		v11.d[1], x7
-	b		1b
-
-	/* store new state */
-3:	st1		{dgav.4s}, [x0]
-	str		dgb, [x0, #16]
-	mov		w0, w2
-	ret
-SYM_FUNC_END(__sha1_ce_transform)
diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c
deleted file mode 100644
index cbd14f208f83..000000000000
--- a/arch/arm64/crypto/sha1-ce-glue.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha1-ce-glue.c - SHA-1 secure hash using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2014 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha1.h>
-#include <crypto/sha1_base.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("sha1");
-
-struct sha1_ce_state {
-	struct sha1_state	sst;
-	u32			finalize;
-};
-
-extern const u32 sha1_ce_offsetof_count;
-extern const u32 sha1_ce_offsetof_finalize;
-
-asmlinkage int __sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src,
-				   int blocks);
-
-static void sha1_ce_transform(struct sha1_state *sst, u8 const *src,
-			      int blocks)
-{
-	while (blocks) {
-		int rem;
-
-		kernel_neon_begin();
-		rem = __sha1_ce_transform(container_of(sst,
-						       struct sha1_ce_state,
-						       sst), src, blocks);
-		kernel_neon_end();
-		src += (blocks - rem) * SHA1_BLOCK_SIZE;
-		blocks = rem;
-	}
-}
-
-const u32 sha1_ce_offsetof_count = offsetof(struct sha1_ce_state, sst.count);
-const u32 sha1_ce_offsetof_finalize = offsetof(struct sha1_ce_state, finalize);
-
-static int sha1_ce_update(struct shash_desc *desc, const u8 *data,
-			  unsigned int len)
-{
-	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable())
-		return crypto_sha1_update(desc, data, len);
-
-	sctx->finalize = 0;
-	sha1_base_do_update(desc, data, len, sha1_ce_transform);
-
-	return 0;
-}
-
-static int sha1_ce_finup(struct shash_desc *desc, const u8 *data,
-			 unsigned int len, u8 *out)
-{
-	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
-	bool finalize = !sctx->sst.count && !(len % SHA1_BLOCK_SIZE) && len;
-
-	if (!crypto_simd_usable())
-		return crypto_sha1_finup(desc, data, len, out);
-
-	/*
-	 * Allow the asm code to perform the finalization if there is no
-	 * partial data and the input is a round multiple of the block size.
-	 */
-	sctx->finalize = finalize;
-
-	sha1_base_do_update(desc, data, len, sha1_ce_transform);
-	if (!finalize)
-		sha1_base_do_finalize(desc, sha1_ce_transform);
-	return sha1_base_finish(desc, out);
-}
-
-static int sha1_ce_final(struct shash_desc *desc, u8 *out)
-{
-	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable())
-		return crypto_sha1_finup(desc, NULL, 0, out);
-
-	sctx->finalize = 0;
-	sha1_base_do_finalize(desc, sha1_ce_transform);
-	return sha1_base_finish(desc, out);
-}
-
-static int sha1_ce_export(struct shash_desc *desc, void *out)
-{
-	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, &sctx->sst, sizeof(struct sha1_state));
-	return 0;
-}
-
-static int sha1_ce_import(struct shash_desc *desc, const void *in)
-{
-	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(&sctx->sst, in, sizeof(struct sha1_state));
-	sctx->finalize = 0;
-	return 0;
-}
-
-static struct shash_alg alg = {
-	.init			= sha1_base_init,
-	.update			= sha1_ce_update,
-	.final			= sha1_ce_final,
-	.finup			= sha1_ce_finup,
-	.import			= sha1_ce_import,
-	.export			= sha1_ce_export,
-	.descsize		= sizeof(struct sha1_ce_state),
-	.statesize		= sizeof(struct sha1_state),
-	.digestsize		= SHA1_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha1",
-		.cra_driver_name	= "sha1-ce",
-		.cra_priority		= 200,
-		.cra_blocksize		= SHA1_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-};
-
-static int __init sha1_ce_mod_init(void)
-{
-	return crypto_register_shash(&alg);
-}
-
-static void __exit sha1_ce_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-module_cpu_feature_match(SHA1, sha1_ce_mod_init);
-module_exit(sha1_ce_mod_fini);
diff --git a/arch/arm64/crypto/sha2-ce-core.S b/arch/arm64/crypto/sha2-ce-core.S
deleted file mode 100644
index fce84d88ddb2..000000000000
--- a/arch/arm64/crypto/sha2-ce-core.S
+++ /dev/null
@@ -1,157 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * sha2-ce-core.S - core SHA-224/SHA-256 transform using v8 Crypto Extensions
- *
- * Copyright (C) 2014 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.arch		armv8-a+crypto
-
-	dga		.req	q20
-	dgav		.req	v20
-	dgb		.req	q21
-	dgbv		.req	v21
-
-	t0		.req	v22
-	t1		.req	v23
-
-	dg0q		.req	q24
-	dg0v		.req	v24
-	dg1q		.req	q25
-	dg1v		.req	v25
-	dg2q		.req	q26
-	dg2v		.req	v26
-
-	.macro		add_only, ev, rc, s0
-	mov		dg2v.16b, dg0v.16b
-	.ifeq		\ev
-	add		t1.4s, v\s0\().4s, \rc\().4s
-	sha256h		dg0q, dg1q, t0.4s
-	sha256h2	dg1q, dg2q, t0.4s
-	.else
-	.ifnb		\s0
-	add		t0.4s, v\s0\().4s, \rc\().4s
-	.endif
-	sha256h		dg0q, dg1q, t1.4s
-	sha256h2	dg1q, dg2q, t1.4s
-	.endif
-	.endm
-
-	.macro		add_update, ev, rc, s0, s1, s2, s3
-	sha256su0	v\s0\().4s, v\s1\().4s
-	add_only	\ev, \rc, \s1
-	sha256su1	v\s0\().4s, v\s2\().4s, v\s3\().4s
-	.endm
-
-	/*
-	 * The SHA-256 round constants
-	 */
-	.section	".rodata", "a"
-	.align		4
-.Lsha2_rcon:
-	.word		0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5
-	.word		0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5
-	.word		0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3
-	.word		0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174
-	.word		0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc
-	.word		0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da
-	.word		0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7
-	.word		0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967
-	.word		0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13
-	.word		0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85
-	.word		0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3
-	.word		0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070
-	.word		0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5
-	.word		0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3
-	.word		0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208
-	.word		0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
-
-	/*
-	 * int __sha256_ce_transform(struct sha256_ce_state *sst, u8 const *src,
-	 *			     int blocks)
-	 */
-	.text
-SYM_FUNC_START(__sha256_ce_transform)
-	/* load round constants */
-	adr_l		x8, .Lsha2_rcon
-	ld1		{ v0.4s- v3.4s}, [x8], #64
-	ld1		{ v4.4s- v7.4s}, [x8], #64
-	ld1		{ v8.4s-v11.4s}, [x8], #64
-	ld1		{v12.4s-v15.4s}, [x8]
-
-	/* load state */
-	ld1		{dgav.4s, dgbv.4s}, [x0]
-
-	/* load sha256_ce_state::finalize */
-	ldr_l		w4, sha256_ce_offsetof_finalize, x4
-	ldr		w4, [x0, x4]
-
-	/* load input */
-0:	ld1		{v16.4s-v19.4s}, [x1], #64
-	sub		w2, w2, #1
-
-CPU_LE(	rev32		v16.16b, v16.16b	)
-CPU_LE(	rev32		v17.16b, v17.16b	)
-CPU_LE(	rev32		v18.16b, v18.16b	)
-CPU_LE(	rev32		v19.16b, v19.16b	)
-
-1:	add		t0.4s, v16.4s, v0.4s
-	mov		dg0v.16b, dgav.16b
-	mov		dg1v.16b, dgbv.16b
-
-	add_update	0,  v1, 16, 17, 18, 19
-	add_update	1,  v2, 17, 18, 19, 16
-	add_update	0,  v3, 18, 19, 16, 17
-	add_update	1,  v4, 19, 16, 17, 18
-
-	add_update	0,  v5, 16, 17, 18, 19
-	add_update	1,  v6, 17, 18, 19, 16
-	add_update	0,  v7, 18, 19, 16, 17
-	add_update	1,  v8, 19, 16, 17, 18
-
-	add_update	0,  v9, 16, 17, 18, 19
-	add_update	1, v10, 17, 18, 19, 16
-	add_update	0, v11, 18, 19, 16, 17
-	add_update	1, v12, 19, 16, 17, 18
-
-	add_only	0, v13, 17
-	add_only	1, v14, 18
-	add_only	0, v15, 19
-	add_only	1
-
-	/* update state */
-	add		dgav.4s, dgav.4s, dg0v.4s
-	add		dgbv.4s, dgbv.4s, dg1v.4s
-
-	/* handled all input blocks? */
-	cbz		w2, 2f
-	cond_yield	3f, x5, x6
-	b		0b
-
-	/*
-	 * Final block: add padding and total bit count.
-	 * Skip if the input size was not a round multiple of the block size,
-	 * the padding is handled by the C code in that case.
-	 */
-2:	cbz		x4, 3f
-	ldr_l		w4, sha256_ce_offsetof_count, x4
-	ldr		x4, [x0, x4]
-	movi		v17.2d, #0
-	mov		x8, #0x80000000
-	movi		v18.2d, #0
-	ror		x7, x4, #29		// ror(lsl(x4, 3), 32)
-	fmov		d16, x8
-	mov		x4, #0
-	mov		v19.d[0], xzr
-	mov		v19.d[1], x7
-	b		1b
-
-	/* store new state */
-3:	st1		{dgav.4s, dgbv.4s}, [x0]
-	mov		w0, w2
-	ret
-SYM_FUNC_END(__sha256_ce_transform)
diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c
deleted file mode 100644
index 6b4866a88ded..000000000000
--- a/arch/arm64/crypto/sha2-ce-glue.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sha2-ce-glue.c - SHA-224/SHA-256 using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2014 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("sha224");
-MODULE_ALIAS_CRYPTO("sha256");
-
-struct sha256_ce_state {
-	struct sha256_state	sst;
-	u32			finalize;
-};
-
-extern const u32 sha256_ce_offsetof_count;
-extern const u32 sha256_ce_offsetof_finalize;
-
-asmlinkage int __sha256_ce_transform(struct sha256_ce_state *sst, u8 const *src,
-				     int blocks);
-
-static void sha256_ce_transform(struct sha256_state *sst, u8 const *src,
-				int blocks)
-{
-	while (blocks) {
-		int rem;
-
-		kernel_neon_begin();
-		rem = __sha256_ce_transform(container_of(sst,
-							 struct sha256_ce_state,
-							 sst), src, blocks);
-		kernel_neon_end();
-		src += (blocks - rem) * SHA256_BLOCK_SIZE;
-		blocks = rem;
-	}
-}
-
-const u32 sha256_ce_offsetof_count = offsetof(struct sha256_ce_state,
-					      sst.count);
-const u32 sha256_ce_offsetof_finalize = offsetof(struct sha256_ce_state,
-						 finalize);
-
-asmlinkage void sha256_block_data_order(u32 *digest, u8 const *src, int blocks);
-
-static void sha256_arm64_transform(struct sha256_state *sst, u8 const *src,
-				   int blocks)
-{
-	sha256_block_data_order(sst->state, src, blocks);
-}
-
-static int sha256_ce_update(struct shash_desc *desc, const u8 *data,
-			    unsigned int len)
-{
-	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable())
-		return sha256_base_do_update(desc, data, len,
-					     sha256_arm64_transform);
-
-	sctx->finalize = 0;
-	sha256_base_do_update(desc, data, len, sha256_ce_transform);
-
-	return 0;
-}
-
-static int sha256_ce_finup(struct shash_desc *desc, const u8 *data,
-			   unsigned int len, u8 *out)
-{
-	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
-	bool finalize = !sctx->sst.count && !(len % SHA256_BLOCK_SIZE) && len;
-
-	if (!crypto_simd_usable()) {
-		if (len)
-			sha256_base_do_update(desc, data, len,
-					      sha256_arm64_transform);
-		sha256_base_do_finalize(desc, sha256_arm64_transform);
-		return sha256_base_finish(desc, out);
-	}
-
-	/*
-	 * Allow the asm code to perform the finalization if there is no
-	 * partial data and the input is a round multiple of the block size.
-	 */
-	sctx->finalize = finalize;
-
-	sha256_base_do_update(desc, data, len, sha256_ce_transform);
-	if (!finalize)
-		sha256_base_do_finalize(desc, sha256_ce_transform);
-	return sha256_base_finish(desc, out);
-}
-
-static int sha256_ce_final(struct shash_desc *desc, u8 *out)
-{
-	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable()) {
-		sha256_base_do_finalize(desc, sha256_arm64_transform);
-		return sha256_base_finish(desc, out);
-	}
-
-	sctx->finalize = 0;
-	sha256_base_do_finalize(desc, sha256_ce_transform);
-	return sha256_base_finish(desc, out);
-}
-
-static int sha256_ce_digest(struct shash_desc *desc, const u8 *data,
-			    unsigned int len, u8 *out)
-{
-	sha256_base_init(desc);
-	return sha256_ce_finup(desc, data, len, out);
-}
-
-static int sha256_ce_export(struct shash_desc *desc, void *out)
-{
-	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, &sctx->sst, sizeof(struct sha256_state));
-	return 0;
-}
-
-static int sha256_ce_import(struct shash_desc *desc, const void *in)
-{
-	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(&sctx->sst, in, sizeof(struct sha256_state));
-	sctx->finalize = 0;
-	return 0;
-}
-
-static struct shash_alg algs[] = { {
-	.init			= sha224_base_init,
-	.update			= sha256_ce_update,
-	.final			= sha256_ce_final,
-	.finup			= sha256_ce_finup,
-	.export			= sha256_ce_export,
-	.import			= sha256_ce_import,
-	.descsize		= sizeof(struct sha256_ce_state),
-	.statesize		= sizeof(struct sha256_state),
-	.digestsize		= SHA224_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha224",
-		.cra_driver_name	= "sha224-ce",
-		.cra_priority		= 200,
-		.cra_blocksize		= SHA256_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-}, {
-	.init			= sha256_base_init,
-	.update			= sha256_ce_update,
-	.final			= sha256_ce_final,
-	.finup			= sha256_ce_finup,
-	.digest			= sha256_ce_digest,
-	.export			= sha256_ce_export,
-	.import			= sha256_ce_import,
-	.descsize		= sizeof(struct sha256_ce_state),
-	.statesize		= sizeof(struct sha256_state),
-	.digestsize		= SHA256_DIGEST_SIZE,
-	.base			= {
-		.cra_name		= "sha256",
-		.cra_driver_name	= "sha256-ce",
-		.cra_priority		= 200,
-		.cra_blocksize		= SHA256_BLOCK_SIZE,
-		.cra_module		= THIS_MODULE,
-	}
-} };
-
-static int __init sha2_ce_mod_init(void)
-{
-	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
-}
-
-static void __exit sha2_ce_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_cpu_feature_match(SHA2, sha2_ce_mod_init);
-module_exit(sha2_ce_mod_fini);
diff --git a/arch/arm64/crypto/sha256-glue.c b/arch/arm64/crypto/sha256-glue.c
deleted file mode 100644
index 35356987cc1e..000000000000
--- a/arch/arm64/crypto/sha256-glue.c
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Linux/arm64 port of the OpenSSL SHA256 implementation for AArch64
- *
- * Copyright (c) 2016 Linaro Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash for arm64");
-MODULE_AUTHOR("Andy Polyakov <appro@openssl.org>");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("sha224");
-MODULE_ALIAS_CRYPTO("sha256");
-
-asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
-					unsigned int num_blks);
-EXPORT_SYMBOL(sha256_block_data_order);
-
-static void sha256_arm64_transform(struct sha256_state *sst, u8 const *src,
-				   int blocks)
-{
-	sha256_block_data_order(sst->state, src, blocks);
-}
-
-asmlinkage void sha256_block_neon(u32 *digest, const void *data,
-				  unsigned int num_blks);
-
-static void sha256_neon_transform(struct sha256_state *sst, u8 const *src,
-				  int blocks)
-{
-	sha256_block_neon(sst->state, src, blocks);
-}
-
-static int crypto_sha256_arm64_update(struct shash_desc *desc, const u8 *data,
-				      unsigned int len)
-{
-	return sha256_base_do_update(desc, data, len, sha256_arm64_transform);
-}
-
-static int crypto_sha256_arm64_finup(struct shash_desc *desc, const u8 *data,
-				     unsigned int len, u8 *out)
-{
-	if (len)
-		sha256_base_do_update(desc, data, len, sha256_arm64_transform);
-	sha256_base_do_finalize(desc, sha256_arm64_transform);
-
-	return sha256_base_finish(desc, out);
-}
-
-static int crypto_sha256_arm64_final(struct shash_desc *desc, u8 *out)
-{
-	return crypto_sha256_arm64_finup(desc, NULL, 0, out);
-}
-
-static struct shash_alg algs[] = { {
-	.digestsize		= SHA256_DIGEST_SIZE,
-	.init			= sha256_base_init,
-	.update			= crypto_sha256_arm64_update,
-	.final			= crypto_sha256_arm64_final,
-	.finup			= crypto_sha256_arm64_finup,
-	.descsize		= sizeof(struct sha256_state),
-	.base.cra_name		= "sha256",
-	.base.cra_driver_name	= "sha256-arm64",
-	.base.cra_priority	= 125,
-	.base.cra_blocksize	= SHA256_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-}, {
-	.digestsize		= SHA224_DIGEST_SIZE,
-	.init			= sha224_base_init,
-	.update			= crypto_sha256_arm64_update,
-	.final			= crypto_sha256_arm64_final,
-	.finup			= crypto_sha256_arm64_finup,
-	.descsize		= sizeof(struct sha256_state),
-	.base.cra_name		= "sha224",
-	.base.cra_driver_name	= "sha224-arm64",
-	.base.cra_priority	= 125,
-	.base.cra_blocksize	= SHA224_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-} };
-
-static int sha256_update_neon(struct shash_desc *desc, const u8 *data,
-			      unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	if (!crypto_simd_usable())
-		return sha256_base_do_update(desc, data, len,
-				sha256_arm64_transform);
-
-	while (len > 0) {
-		unsigned int chunk = len;
-
-		/*
-		 * Don't hog the CPU for the entire time it takes to process all
-		 * input when running on a preemptible kernel, but process the
-		 * data block by block instead.
-		 */
-		if (IS_ENABLED(CONFIG_PREEMPTION) &&
-		    chunk + sctx->count % SHA256_BLOCK_SIZE > SHA256_BLOCK_SIZE)
-			chunk = SHA256_BLOCK_SIZE -
-				sctx->count % SHA256_BLOCK_SIZE;
-
-		kernel_neon_begin();
-		sha256_base_do_update(desc, data, chunk, sha256_neon_transform);
-		kernel_neon_end();
-		data += chunk;
-		len -= chunk;
-	}
-	return 0;
-}
-
-static int sha256_finup_neon(struct shash_desc *desc, const u8 *data,
-			     unsigned int len, u8 *out)
-{
-	if (!crypto_simd_usable()) {
-		if (len)
-			sha256_base_do_update(desc, data, len,
-				sha256_arm64_transform);
-		sha256_base_do_finalize(desc, sha256_arm64_transform);
-	} else {
-		if (len)
-			sha256_update_neon(desc, data, len);
-		kernel_neon_begin();
-		sha256_base_do_finalize(desc, sha256_neon_transform);
-		kernel_neon_end();
-	}
-	return sha256_base_finish(desc, out);
-}
-
-static int sha256_final_neon(struct shash_desc *desc, u8 *out)
-{
-	return sha256_finup_neon(desc, NULL, 0, out);
-}
-
-static struct shash_alg neon_algs[] = { {
-	.digestsize		= SHA256_DIGEST_SIZE,
-	.init			= sha256_base_init,
-	.update			= sha256_update_neon,
-	.final			= sha256_final_neon,
-	.finup			= sha256_finup_neon,
-	.descsize		= sizeof(struct sha256_state),
-	.base.cra_name		= "sha256",
-	.base.cra_driver_name	= "sha256-arm64-neon",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= SHA256_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-}, {
-	.digestsize		= SHA224_DIGEST_SIZE,
-	.init			= sha224_base_init,
-	.update			= sha256_update_neon,
-	.final			= sha256_final_neon,
-	.finup			= sha256_finup_neon,
-	.descsize		= sizeof(struct sha256_state),
-	.base.cra_name		= "sha224",
-	.base.cra_driver_name	= "sha224-arm64-neon",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= SHA224_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-} };
-
-static int __init sha256_mod_init(void)
-{
-	int ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
-	if (ret)
-		return ret;
-
-	if (cpu_have_named_feature(ASIMD)) {
-		ret = crypto_register_shashes(neon_algs, ARRAY_SIZE(neon_algs));
-		if (ret)
-			crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-	}
-	return ret;
-}
-
-static void __exit sha256_mod_fini(void)
-{
-	if (cpu_have_named_feature(ASIMD))
-		crypto_unregister_shashes(neon_algs, ARRAY_SIZE(neon_algs));
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_init(sha256_mod_init);
-module_exit(sha256_mod_fini);
diff --git a/arch/arm64/crypto/sha3-ce-core.S b/arch/arm64/crypto/sha3-ce-core.S
deleted file mode 100644
index 9c77313f5a60..000000000000
--- a/arch/arm64/crypto/sha3-ce-core.S
+++ /dev/null
@@ -1,212 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * sha3-ce-core.S - core SHA-3 transform using v8.2 Crypto Extensions
- *
- * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.irp	b,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
-	.set	.Lv\b\().2d, \b
-	.set	.Lv\b\().16b, \b
-	.endr
-
-	/*
-	 * ARMv8.2 Crypto Extensions instructions
-	 */
-	.macro	eor3, rd, rn, rm, ra
-	.inst	0xce000000 | .L\rd | (.L\rn << 5) | (.L\ra << 10) | (.L\rm << 16)
-	.endm
-
-	.macro	rax1, rd, rn, rm
-	.inst	0xce608c00 | .L\rd | (.L\rn << 5) | (.L\rm << 16)
-	.endm
-
-	.macro	bcax, rd, rn, rm, ra
-	.inst	0xce200000 | .L\rd | (.L\rn << 5) | (.L\ra << 10) | (.L\rm << 16)
-	.endm
-
-	.macro	xar, rd, rn, rm, imm6
-	.inst	0xce800000 | .L\rd | (.L\rn << 5) | ((\imm6) << 10) | (.L\rm << 16)
-	.endm
-
-	/*
-	 * int sha3_ce_transform(u64 *st, const u8 *data, int blocks, int dg_size)
-	 */
-	.text
-SYM_FUNC_START(sha3_ce_transform)
-	/* load state */
-	add	x8, x0, #32
-	ld1	{ v0.1d- v3.1d}, [x0]
-	ld1	{ v4.1d- v7.1d}, [x8], #32
-	ld1	{ v8.1d-v11.1d}, [x8], #32
-	ld1	{v12.1d-v15.1d}, [x8], #32
-	ld1	{v16.1d-v19.1d}, [x8], #32
-	ld1	{v20.1d-v23.1d}, [x8], #32
-	ld1	{v24.1d}, [x8]
-
-0:	sub	w2, w2, #1
-	mov	w8, #24
-	adr_l	x9, .Lsha3_rcon
-
-	/* load input */
-	ld1	{v25.8b-v28.8b}, [x1], #32
-	ld1	{v29.8b-v31.8b}, [x1], #24
-	eor	v0.8b, v0.8b, v25.8b
-	eor	v1.8b, v1.8b, v26.8b
-	eor	v2.8b, v2.8b, v27.8b
-	eor	v3.8b, v3.8b, v28.8b
-	eor	v4.8b, v4.8b, v29.8b
-	eor	v5.8b, v5.8b, v30.8b
-	eor	v6.8b, v6.8b, v31.8b
-
-	tbnz	x3, #6, 2f		// SHA3-512
-
-	ld1	{v25.8b-v28.8b}, [x1], #32
-	ld1	{v29.8b-v30.8b}, [x1], #16
-	eor	 v7.8b,  v7.8b, v25.8b
-	eor	 v8.8b,  v8.8b, v26.8b
-	eor	 v9.8b,  v9.8b, v27.8b
-	eor	v10.8b, v10.8b, v28.8b
-	eor	v11.8b, v11.8b, v29.8b
-	eor	v12.8b, v12.8b, v30.8b
-
-	tbnz	x3, #4, 1f		// SHA3-384 or SHA3-224
-
-	// SHA3-256
-	ld1	{v25.8b-v28.8b}, [x1], #32
-	eor	v13.8b, v13.8b, v25.8b
-	eor	v14.8b, v14.8b, v26.8b
-	eor	v15.8b, v15.8b, v27.8b
-	eor	v16.8b, v16.8b, v28.8b
-	b	3f
-
-1:	tbz	x3, #2, 3f		// bit 2 cleared? SHA-384
-
-	// SHA3-224
-	ld1	{v25.8b-v28.8b}, [x1], #32
-	ld1	{v29.8b}, [x1], #8
-	eor	v13.8b, v13.8b, v25.8b
-	eor	v14.8b, v14.8b, v26.8b
-	eor	v15.8b, v15.8b, v27.8b
-	eor	v16.8b, v16.8b, v28.8b
-	eor	v17.8b, v17.8b, v29.8b
-	b	3f
-
-	// SHA3-512
-2:	ld1	{v25.8b-v26.8b}, [x1], #16
-	eor	 v7.8b,  v7.8b, v25.8b
-	eor	 v8.8b,  v8.8b, v26.8b
-
-3:	sub	w8, w8, #1
-
-	eor3	v29.16b,  v4.16b,  v9.16b, v14.16b
-	eor3	v26.16b,  v1.16b,  v6.16b, v11.16b
-	eor3	v28.16b,  v3.16b,  v8.16b, v13.16b
-	eor3	v25.16b,  v0.16b,  v5.16b, v10.16b
-	eor3	v27.16b,  v2.16b,  v7.16b, v12.16b
-	eor3	v29.16b, v29.16b, v19.16b, v24.16b
-	eor3	v26.16b, v26.16b, v16.16b, v21.16b
-	eor3	v28.16b, v28.16b, v18.16b, v23.16b
-	eor3	v25.16b, v25.16b, v15.16b, v20.16b
-	eor3	v27.16b, v27.16b, v17.16b, v22.16b
-
-	rax1	v30.2d, v29.2d, v26.2d	// bc[0]
-	rax1	v26.2d, v26.2d, v28.2d	// bc[2]
-	rax1	v28.2d, v28.2d, v25.2d	// bc[4]
-	rax1	v25.2d, v25.2d, v27.2d	// bc[1]
-	rax1	v27.2d, v27.2d, v29.2d	// bc[3]
-
-	eor	 v0.16b,  v0.16b, v30.16b
-	xar	 v29.2d,   v1.2d,  v25.2d, (64 - 1)
-	xar	  v1.2d,   v6.2d,  v25.2d, (64 - 44)
-	xar	  v6.2d,   v9.2d,  v28.2d, (64 - 20)
-	xar	  v9.2d,  v22.2d,  v26.2d, (64 - 61)
-	xar	 v22.2d,  v14.2d,  v28.2d, (64 - 39)
-	xar	 v14.2d,  v20.2d,  v30.2d, (64 - 18)
-	xar	 v31.2d,   v2.2d,  v26.2d, (64 - 62)
-	xar	  v2.2d,  v12.2d,  v26.2d, (64 - 43)
-	xar	 v12.2d,  v13.2d,  v27.2d, (64 - 25)
-	xar	 v13.2d,  v19.2d,  v28.2d, (64 - 8)
-	xar	 v19.2d,  v23.2d,  v27.2d, (64 - 56)
-	xar	 v23.2d,  v15.2d,  v30.2d, (64 - 41)
-	xar	 v15.2d,   v4.2d,  v28.2d, (64 - 27)
-	xar	 v28.2d,  v24.2d,  v28.2d, (64 - 14)
-	xar	 v24.2d,  v21.2d,  v25.2d, (64 - 2)
-	xar	  v8.2d,   v8.2d,  v27.2d, (64 - 55)
-	xar	  v4.2d,  v16.2d,  v25.2d, (64 - 45)
-	xar	 v16.2d,   v5.2d,  v30.2d, (64 - 36)
-	xar	  v5.2d,   v3.2d,  v27.2d, (64 - 28)
-	xar	 v27.2d,  v18.2d,  v27.2d, (64 - 21)
-	xar	  v3.2d,  v17.2d,  v26.2d, (64 - 15)
-	xar	 v25.2d,  v11.2d,  v25.2d, (64 - 10)
-	xar	 v26.2d,   v7.2d,  v26.2d, (64 - 6)
-	xar	 v30.2d,  v10.2d,  v30.2d, (64 - 3)
-
-	bcax	v20.16b, v31.16b, v22.16b,  v8.16b
-	bcax	v21.16b,  v8.16b, v23.16b, v22.16b
-	bcax	v22.16b, v22.16b, v24.16b, v23.16b
-	bcax	v23.16b, v23.16b, v31.16b, v24.16b
-	bcax	v24.16b, v24.16b,  v8.16b, v31.16b
-
-	ld1r	{v31.2d}, [x9], #8
-
-	bcax	v17.16b, v25.16b, v19.16b,  v3.16b
-	bcax	v18.16b,  v3.16b, v15.16b, v19.16b
-	bcax	v19.16b, v19.16b, v16.16b, v15.16b
-	bcax	v15.16b, v15.16b, v25.16b, v16.16b
-	bcax	v16.16b, v16.16b,  v3.16b, v25.16b
-
-	bcax	v10.16b, v29.16b, v12.16b, v26.16b
-	bcax	v11.16b, v26.16b, v13.16b, v12.16b
-	bcax	v12.16b, v12.16b, v14.16b, v13.16b
-	bcax	v13.16b, v13.16b, v29.16b, v14.16b
-	bcax	v14.16b, v14.16b, v26.16b, v29.16b
-
-	bcax	 v7.16b, v30.16b,  v9.16b,  v4.16b
-	bcax	 v8.16b,  v4.16b,  v5.16b,  v9.16b
-	bcax	 v9.16b,  v9.16b,  v6.16b,  v5.16b
-	bcax	 v5.16b,  v5.16b, v30.16b,  v6.16b
-	bcax	 v6.16b,  v6.16b,  v4.16b, v30.16b
-
-	bcax	 v3.16b, v27.16b,  v0.16b, v28.16b
-	bcax	 v4.16b, v28.16b,  v1.16b,  v0.16b
-	bcax	 v0.16b,  v0.16b,  v2.16b,  v1.16b
-	bcax	 v1.16b,  v1.16b, v27.16b,  v2.16b
-	bcax	 v2.16b,  v2.16b, v28.16b, v27.16b
-
-	eor	 v0.16b,  v0.16b, v31.16b
-
-	cbnz	w8, 3b
-	cond_yield 4f, x8, x9
-	cbnz	w2, 0b
-
-	/* save state */
-4:	st1	{ v0.1d- v3.1d}, [x0], #32
-	st1	{ v4.1d- v7.1d}, [x0], #32
-	st1	{ v8.1d-v11.1d}, [x0], #32
-	st1	{v12.1d-v15.1d}, [x0], #32
-	st1	{v16.1d-v19.1d}, [x0], #32
-	st1	{v20.1d-v23.1d}, [x0], #32
-	st1	{v24.1d}, [x0]
-	mov	w0, w2
-	ret
-SYM_FUNC_END(sha3_ce_transform)
-
-	.section	".rodata", "a"
-	.align		8
-.Lsha3_rcon:
-	.quad	0x0000000000000001, 0x0000000000008082, 0x800000000000808a
-	.quad	0x8000000080008000, 0x000000000000808b, 0x0000000080000001
-	.quad	0x8000000080008081, 0x8000000000008009, 0x000000000000008a
-	.quad	0x0000000000000088, 0x0000000080008009, 0x000000008000000a
-	.quad	0x000000008000808b, 0x800000000000008b, 0x8000000000008089
-	.quad	0x8000000000008003, 0x8000000000008002, 0x8000000000000080
-	.quad	0x000000000000800a, 0x800000008000000a, 0x8000000080008081
-	.quad	0x8000000000008080, 0x0000000080000001, 0x8000000080008008
diff --git a/arch/arm64/crypto/sha3-ce-glue.c b/arch/arm64/crypto/sha3-ce-glue.c
deleted file mode 100644
index 5662c3ac49e9..000000000000
--- a/arch/arm64/crypto/sha3-ce-glue.c
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * sha3-ce-glue.c - core SHA-3 transform using v8.2 Crypto Extensions
- *
- * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha3.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-MODULE_DESCRIPTION("SHA3 secure hash using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("sha3-224");
-MODULE_ALIAS_CRYPTO("sha3-256");
-MODULE_ALIAS_CRYPTO("sha3-384");
-MODULE_ALIAS_CRYPTO("sha3-512");
-
-asmlinkage int sha3_ce_transform(u64 *st, const u8 *data, int blocks,
-				 int md_len);
-
-static int sha3_update(struct shash_desc *desc, const u8 *data,
-		       unsigned int len)
-{
-	struct sha3_state *sctx = shash_desc_ctx(desc);
-	unsigned int digest_size = crypto_shash_digestsize(desc->tfm);
-
-	if (!crypto_simd_usable())
-		return crypto_sha3_update(desc, data, len);
-
-	if ((sctx->partial + len) >= sctx->rsiz) {
-		int blocks;
-
-		if (sctx->partial) {
-			int p = sctx->rsiz - sctx->partial;
-
-			memcpy(sctx->buf + sctx->partial, data, p);
-			kernel_neon_begin();
-			sha3_ce_transform(sctx->st, sctx->buf, 1, digest_size);
-			kernel_neon_end();
-
-			data += p;
-			len -= p;
-			sctx->partial = 0;
-		}
-
-		blocks = len / sctx->rsiz;
-		len %= sctx->rsiz;
-
-		while (blocks) {
-			int rem;
-
-			kernel_neon_begin();
-			rem = sha3_ce_transform(sctx->st, data, blocks,
-						digest_size);
-			kernel_neon_end();
-			data += (blocks - rem) * sctx->rsiz;
-			blocks = rem;
-		}
-	}
-
-	if (len) {
-		memcpy(sctx->buf + sctx->partial, data, len);
-		sctx->partial += len;
-	}
-	return 0;
-}
-
-static int sha3_final(struct shash_desc *desc, u8 *out)
-{
-	struct sha3_state *sctx = shash_desc_ctx(desc);
-	unsigned int digest_size = crypto_shash_digestsize(desc->tfm);
-	__le64 *digest = (__le64 *)out;
-	int i;
-
-	if (!crypto_simd_usable())
-		return crypto_sha3_final(desc, out);
-
-	sctx->buf[sctx->partial++] = 0x06;
-	memset(sctx->buf + sctx->partial, 0, sctx->rsiz - sctx->partial);
-	sctx->buf[sctx->rsiz - 1] |= 0x80;
-
-	kernel_neon_begin();
-	sha3_ce_transform(sctx->st, sctx->buf, 1, digest_size);
-	kernel_neon_end();
-
-	for (i = 0; i < digest_size / 8; i++)
-		put_unaligned_le64(sctx->st[i], digest++);
-
-	if (digest_size & 4)
-		put_unaligned_le32(sctx->st[i], (__le32 *)digest);
-
-	memzero_explicit(sctx, sizeof(*sctx));
-	return 0;
-}
-
-static struct shash_alg algs[] = { {
-	.digestsize		= SHA3_224_DIGEST_SIZE,
-	.init			= crypto_sha3_init,
-	.update			= sha3_update,
-	.final			= sha3_final,
-	.descsize		= sizeof(struct sha3_state),
-	.base.cra_name		= "sha3-224",
-	.base.cra_driver_name	= "sha3-224-ce",
-	.base.cra_blocksize	= SHA3_224_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-	.base.cra_priority	= 200,
-}, {
-	.digestsize		= SHA3_256_DIGEST_SIZE,
-	.init			= crypto_sha3_init,
-	.update			= sha3_update,
-	.final			= sha3_final,
-	.descsize		= sizeof(struct sha3_state),
-	.base.cra_name		= "sha3-256",
-	.base.cra_driver_name	= "sha3-256-ce",
-	.base.cra_blocksize	= SHA3_256_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-	.base.cra_priority	= 200,
-}, {
-	.digestsize		= SHA3_384_DIGEST_SIZE,
-	.init			= crypto_sha3_init,
-	.update			= sha3_update,
-	.final			= sha3_final,
-	.descsize		= sizeof(struct sha3_state),
-	.base.cra_name		= "sha3-384",
-	.base.cra_driver_name	= "sha3-384-ce",
-	.base.cra_blocksize	= SHA3_384_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-	.base.cra_priority	= 200,
-}, {
-	.digestsize		= SHA3_512_DIGEST_SIZE,
-	.init			= crypto_sha3_init,
-	.update			= sha3_update,
-	.final			= sha3_final,
-	.descsize		= sizeof(struct sha3_state),
-	.base.cra_name		= "sha3-512",
-	.base.cra_driver_name	= "sha3-512-ce",
-	.base.cra_blocksize	= SHA3_512_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-	.base.cra_priority	= 200,
-} };
-
-static int __init sha3_neon_mod_init(void)
-{
-	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
-}
-
-static void __exit sha3_neon_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_cpu_feature_match(SHA3, sha3_neon_mod_init);
-module_exit(sha3_neon_mod_fini);
diff --git a/arch/arm64/crypto/sha512-armv8.pl b/arch/arm64/crypto/sha512-armv8.pl
deleted file mode 100644
index 35ec9ae99fe1..000000000000
--- a/arch/arm64/crypto/sha512-armv8.pl
+++ /dev/null
@@ -1,786 +0,0 @@
-#! /usr/bin/env perl
-# SPDX-License-Identifier: GPL-2.0
-
-# This code is taken from the OpenSSL project but the author (Andy Polyakov)
-# has relicensed it under the GPLv2. Therefore this program is free software;
-# you can redistribute it and/or modify it under the terms of the GNU General
-# Public License version 2 as published by the Free Software Foundation.
-#
-# The original headers, including the original license headers, are
-# included below for completeness.
-
-# Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved.
-#
-# Licensed under the OpenSSL license (the "License").  You may not use
-# this file except in compliance with the License.  You can obtain a copy
-# in the file LICENSE in the source distribution or at
-# https://www.openssl.org/source/license.html
-
-# ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-#
-# SHA256/512 for ARMv8.
-#
-# Performance in cycles per processed byte and improvement coefficient
-# over code generated with "default" compiler:
-#
-#		SHA256-hw	SHA256(*)	SHA512
-# Apple A7	1.97		10.5 (+33%)	6.73 (-1%(**))
-# Cortex-A53	2.38		15.5 (+115%)	10.0 (+150%(***))
-# Cortex-A57	2.31		11.6 (+86%)	7.51 (+260%(***))
-# Denver	2.01		10.5 (+26%)	6.70 (+8%)
-# X-Gene			20.0 (+100%)	12.8 (+300%(***))
-# Mongoose	2.36		13.0 (+50%)	8.36 (+33%)
-#
-# (*)	Software SHA256 results are of lesser relevance, presented
-#	mostly for informational purposes.
-# (**)	The result is a trade-off: it's possible to improve it by
-#	10% (or by 1 cycle per round), but at the cost of 20% loss
-#	on Cortex-A53 (or by 4 cycles per round).
-# (***)	Super-impressive coefficients over gcc-generated code are
-#	indication of some compiler "pathology", most notably code
-#	generated with -mgeneral-regs-only is significantly faster
-#	and the gap is only 40-90%.
-#
-# October 2016.
-#
-# Originally it was reckoned that it makes no sense to implement NEON
-# version of SHA256 for 64-bit processors. This is because performance
-# improvement on most wide-spread Cortex-A5x processors was observed
-# to be marginal, same on Cortex-A53 and ~10% on A57. But then it was
-# observed that 32-bit NEON SHA256 performs significantly better than
-# 64-bit scalar version on *some* of the more recent processors. As
-# result 64-bit NEON version of SHA256 was added to provide best
-# all-round performance. For example it executes ~30% faster on X-Gene
-# and Mongoose. [For reference, NEON version of SHA512 is bound to
-# deliver much less improvement, likely *negative* on Cortex-A5x.
-# Which is why NEON support is limited to SHA256.]
-
-$output=pop;
-$flavour=pop;
-
-if ($flavour && $flavour ne "void") {
-    $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-    ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
-    ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
-    die "can't locate arm-xlate.pl";
-
-    open OUT,"| \"$^X\" $xlate $flavour $output";
-    *STDOUT=*OUT;
-} else {
-    open STDOUT,">$output";
-}
-
-if ($output =~ /512/) {
-	$BITS=512;
-	$SZ=8;
-	@Sigma0=(28,34,39);
-	@Sigma1=(14,18,41);
-	@sigma0=(1,  8, 7);
-	@sigma1=(19,61, 6);
-	$rounds=80;
-	$reg_t="x";
-} else {
-	$BITS=256;
-	$SZ=4;
-	@Sigma0=( 2,13,22);
-	@Sigma1=( 6,11,25);
-	@sigma0=( 7,18, 3);
-	@sigma1=(17,19,10);
-	$rounds=64;
-	$reg_t="w";
-}
-
-$func="sha${BITS}_block_data_order";
-
-($ctx,$inp,$num,$Ktbl)=map("x$_",(0..2,30));
-
-@X=map("$reg_t$_",(3..15,0..2));
-@V=($A,$B,$C,$D,$E,$F,$G,$H)=map("$reg_t$_",(20..27));
-($t0,$t1,$t2,$t3)=map("$reg_t$_",(16,17,19,28));
-
-sub BODY_00_xx {
-my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
-my $j=($i+1)&15;
-my ($T0,$T1,$T2)=(@X[($i-8)&15],@X[($i-9)&15],@X[($i-10)&15]);
-   $T0=@X[$i+3] if ($i<11);
-
-$code.=<<___	if ($i<16);
-#ifndef	__AARCH64EB__
-	rev	@X[$i],@X[$i]			// $i
-#endif
-___
-$code.=<<___	if ($i<13 && ($i&1));
-	ldp	@X[$i+1],@X[$i+2],[$inp],#2*$SZ
-___
-$code.=<<___	if ($i==13);
-	ldp	@X[14],@X[15],[$inp]
-___
-$code.=<<___	if ($i>=14);
-	ldr	@X[($i-11)&15],[sp,#`$SZ*(($i-11)%4)`]
-___
-$code.=<<___	if ($i>0 && $i<16);
-	add	$a,$a,$t1			// h+=Sigma0(a)
-___
-$code.=<<___	if ($i>=11);
-	str	@X[($i-8)&15],[sp,#`$SZ*(($i-8)%4)`]
-___
-# While ARMv8 specifies merged rotate-n-logical operation such as
-# 'eor x,y,z,ror#n', it was found to negatively affect performance
-# on Apple A7. The reason seems to be that it requires even 'y' to
-# be available earlier. This means that such merged instruction is
-# not necessarily best choice on critical path... On the other hand
-# Cortex-A5x handles merged instructions much better than disjoint
-# rotate and logical... See (**) footnote above.
-$code.=<<___	if ($i<15);
-	ror	$t0,$e,#$Sigma1[0]
-	add	$h,$h,$t2			// h+=K[i]
-	eor	$T0,$e,$e,ror#`$Sigma1[2]-$Sigma1[1]`
-	and	$t1,$f,$e
-	bic	$t2,$g,$e
-	add	$h,$h,@X[$i&15]			// h+=X[i]
-	orr	$t1,$t1,$t2			// Ch(e,f,g)
-	eor	$t2,$a,$b			// a^b, b^c in next round
-	eor	$t0,$t0,$T0,ror#$Sigma1[1]	// Sigma1(e)
-	ror	$T0,$a,#$Sigma0[0]
-	add	$h,$h,$t1			// h+=Ch(e,f,g)
-	eor	$t1,$a,$a,ror#`$Sigma0[2]-$Sigma0[1]`
-	add	$h,$h,$t0			// h+=Sigma1(e)
-	and	$t3,$t3,$t2			// (b^c)&=(a^b)
-	add	$d,$d,$h			// d+=h
-	eor	$t3,$t3,$b			// Maj(a,b,c)
-	eor	$t1,$T0,$t1,ror#$Sigma0[1]	// Sigma0(a)
-	add	$h,$h,$t3			// h+=Maj(a,b,c)
-	ldr	$t3,[$Ktbl],#$SZ		// *K++, $t2 in next round
-	//add	$h,$h,$t1			// h+=Sigma0(a)
-___
-$code.=<<___	if ($i>=15);
-	ror	$t0,$e,#$Sigma1[0]
-	add	$h,$h,$t2			// h+=K[i]
-	ror	$T1,@X[($j+1)&15],#$sigma0[0]
-	and	$t1,$f,$e
-	ror	$T2,@X[($j+14)&15],#$sigma1[0]
-	bic	$t2,$g,$e
-	ror	$T0,$a,#$Sigma0[0]
-	add	$h,$h,@X[$i&15]			// h+=X[i]
-	eor	$t0,$t0,$e,ror#$Sigma1[1]
-	eor	$T1,$T1,@X[($j+1)&15],ror#$sigma0[1]
-	orr	$t1,$t1,$t2			// Ch(e,f,g)
-	eor	$t2,$a,$b			// a^b, b^c in next round
-	eor	$t0,$t0,$e,ror#$Sigma1[2]	// Sigma1(e)
-	eor	$T0,$T0,$a,ror#$Sigma0[1]
-	add	$h,$h,$t1			// h+=Ch(e,f,g)
-	and	$t3,$t3,$t2			// (b^c)&=(a^b)
-	eor	$T2,$T2,@X[($j+14)&15],ror#$sigma1[1]
-	eor	$T1,$T1,@X[($j+1)&15],lsr#$sigma0[2]	// sigma0(X[i+1])
-	add	$h,$h,$t0			// h+=Sigma1(e)
-	eor	$t3,$t3,$b			// Maj(a,b,c)
-	eor	$t1,$T0,$a,ror#$Sigma0[2]	// Sigma0(a)
-	eor	$T2,$T2,@X[($j+14)&15],lsr#$sigma1[2]	// sigma1(X[i+14])
-	add	@X[$j],@X[$j],@X[($j+9)&15]
-	add	$d,$d,$h			// d+=h
-	add	$h,$h,$t3			// h+=Maj(a,b,c)
-	ldr	$t3,[$Ktbl],#$SZ		// *K++, $t2 in next round
-	add	@X[$j],@X[$j],$T1
-	add	$h,$h,$t1			// h+=Sigma0(a)
-	add	@X[$j],@X[$j],$T2
-___
-	($t2,$t3)=($t3,$t2);
-}
-
-$code.=<<___;
-#ifndef	__KERNEL__
-# include "arm_arch.h"
-#endif
-
-.text
-
-.extern	OPENSSL_armcap_P
-.globl	$func
-.type	$func,%function
-.align	6
-$func:
-___
-$code.=<<___	if ($SZ==4);
-#ifndef	__KERNEL__
-# ifdef	__ILP32__
-	ldrsw	x16,.LOPENSSL_armcap_P
-# else
-	ldr	x16,.LOPENSSL_armcap_P
-# endif
-	adr	x17,.LOPENSSL_armcap_P
-	add	x16,x16,x17
-	ldr	w16,[x16]
-	tst	w16,#ARMV8_SHA256
-	b.ne	.Lv8_entry
-	tst	w16,#ARMV7_NEON
-	b.ne	.Lneon_entry
-#endif
-___
-$code.=<<___;
-	stp	x29,x30,[sp,#-128]!
-	add	x29,sp,#0
-
-	stp	x19,x20,[sp,#16]
-	stp	x21,x22,[sp,#32]
-	stp	x23,x24,[sp,#48]
-	stp	x25,x26,[sp,#64]
-	stp	x27,x28,[sp,#80]
-	sub	sp,sp,#4*$SZ
-
-	ldp	$A,$B,[$ctx]				// load context
-	ldp	$C,$D,[$ctx,#2*$SZ]
-	ldp	$E,$F,[$ctx,#4*$SZ]
-	add	$num,$inp,$num,lsl#`log(16*$SZ)/log(2)`	// end of input
-	ldp	$G,$H,[$ctx,#6*$SZ]
-	adr	$Ktbl,.LK$BITS
-	stp	$ctx,$num,[x29,#96]
-
-.Loop:
-	ldp	@X[0],@X[1],[$inp],#2*$SZ
-	ldr	$t2,[$Ktbl],#$SZ			// *K++
-	eor	$t3,$B,$C				// magic seed
-	str	$inp,[x29,#112]
-___
-for ($i=0;$i<16;$i++)	{ &BODY_00_xx($i,@V); unshift(@V,pop(@V)); }
-$code.=".Loop_16_xx:\n";
-for (;$i<32;$i++)	{ &BODY_00_xx($i,@V); unshift(@V,pop(@V)); }
-$code.=<<___;
-	cbnz	$t2,.Loop_16_xx
-
-	ldp	$ctx,$num,[x29,#96]
-	ldr	$inp,[x29,#112]
-	sub	$Ktbl,$Ktbl,#`$SZ*($rounds+1)`		// rewind
-
-	ldp	@X[0],@X[1],[$ctx]
-	ldp	@X[2],@X[3],[$ctx,#2*$SZ]
-	add	$inp,$inp,#14*$SZ			// advance input pointer
-	ldp	@X[4],@X[5],[$ctx,#4*$SZ]
-	add	$A,$A,@X[0]
-	ldp	@X[6],@X[7],[$ctx,#6*$SZ]
-	add	$B,$B,@X[1]
-	add	$C,$C,@X[2]
-	add	$D,$D,@X[3]
-	stp	$A,$B,[$ctx]
-	add	$E,$E,@X[4]
-	add	$F,$F,@X[5]
-	stp	$C,$D,[$ctx,#2*$SZ]
-	add	$G,$G,@X[6]
-	add	$H,$H,@X[7]
-	cmp	$inp,$num
-	stp	$E,$F,[$ctx,#4*$SZ]
-	stp	$G,$H,[$ctx,#6*$SZ]
-	b.ne	.Loop
-
-	ldp	x19,x20,[x29,#16]
-	add	sp,sp,#4*$SZ
-	ldp	x21,x22,[x29,#32]
-	ldp	x23,x24,[x29,#48]
-	ldp	x25,x26,[x29,#64]
-	ldp	x27,x28,[x29,#80]
-	ldp	x29,x30,[sp],#128
-	ret
-.size	$func,.-$func
-
-.align	6
-.type	.LK$BITS,%object
-.LK$BITS:
-___
-$code.=<<___ if ($SZ==8);
-	.quad	0x428a2f98d728ae22,0x7137449123ef65cd
-	.quad	0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc
-	.quad	0x3956c25bf348b538,0x59f111f1b605d019
-	.quad	0x923f82a4af194f9b,0xab1c5ed5da6d8118
-	.quad	0xd807aa98a3030242,0x12835b0145706fbe
-	.quad	0x243185be4ee4b28c,0x550c7dc3d5ffb4e2
-	.quad	0x72be5d74f27b896f,0x80deb1fe3b1696b1
-	.quad	0x9bdc06a725c71235,0xc19bf174cf692694
-	.quad	0xe49b69c19ef14ad2,0xefbe4786384f25e3
-	.quad	0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65
-	.quad	0x2de92c6f592b0275,0x4a7484aa6ea6e483
-	.quad	0x5cb0a9dcbd41fbd4,0x76f988da831153b5
-	.quad	0x983e5152ee66dfab,0xa831c66d2db43210
-	.quad	0xb00327c898fb213f,0xbf597fc7beef0ee4
-	.quad	0xc6e00bf33da88fc2,0xd5a79147930aa725
-	.quad	0x06ca6351e003826f,0x142929670a0e6e70
-	.quad	0x27b70a8546d22ffc,0x2e1b21385c26c926
-	.quad	0x4d2c6dfc5ac42aed,0x53380d139d95b3df
-	.quad	0x650a73548baf63de,0x766a0abb3c77b2a8
-	.quad	0x81c2c92e47edaee6,0x92722c851482353b
-	.quad	0xa2bfe8a14cf10364,0xa81a664bbc423001
-	.quad	0xc24b8b70d0f89791,0xc76c51a30654be30
-	.quad	0xd192e819d6ef5218,0xd69906245565a910
-	.quad	0xf40e35855771202a,0x106aa07032bbd1b8
-	.quad	0x19a4c116b8d2d0c8,0x1e376c085141ab53
-	.quad	0x2748774cdf8eeb99,0x34b0bcb5e19b48a8
-	.quad	0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb
-	.quad	0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3
-	.quad	0x748f82ee5defb2fc,0x78a5636f43172f60
-	.quad	0x84c87814a1f0ab72,0x8cc702081a6439ec
-	.quad	0x90befffa23631e28,0xa4506cebde82bde9
-	.quad	0xbef9a3f7b2c67915,0xc67178f2e372532b
-	.quad	0xca273eceea26619c,0xd186b8c721c0c207
-	.quad	0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178
-	.quad	0x06f067aa72176fba,0x0a637dc5a2c898a6
-	.quad	0x113f9804bef90dae,0x1b710b35131c471b
-	.quad	0x28db77f523047d84,0x32caab7b40c72493
-	.quad	0x3c9ebe0a15c9bebc,0x431d67c49c100d4c
-	.quad	0x4cc5d4becb3e42b6,0x597f299cfc657e2a
-	.quad	0x5fcb6fab3ad6faec,0x6c44198c4a475817
-	.quad	0	// terminator
-___
-$code.=<<___ if ($SZ==4);
-	.long	0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
-	.long	0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
-	.long	0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
-	.long	0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
-	.long	0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
-	.long	0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
-	.long	0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
-	.long	0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
-	.long	0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
-	.long	0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
-	.long	0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
-	.long	0xd192e819,0xd6990624,0xf40e3585,0x106aa070
-	.long	0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
-	.long	0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
-	.long	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
-	.long	0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
-	.long	0	//terminator
-___
-$code.=<<___;
-.size	.LK$BITS,.-.LK$BITS
-#ifndef	__KERNEL__
-.align	3
-.LOPENSSL_armcap_P:
-# ifdef	__ILP32__
-	.long	OPENSSL_armcap_P-.
-# else
-	.quad	OPENSSL_armcap_P-.
-# endif
-#endif
-.asciz	"SHA$BITS block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
-.align	2
-___
-
-if ($SZ==4) {
-my $Ktbl="x3";
-
-my ($ABCD,$EFGH,$abcd)=map("v$_.16b",(0..2));
-my @MSG=map("v$_.16b",(4..7));
-my ($W0,$W1)=("v16.4s","v17.4s");
-my ($ABCD_SAVE,$EFGH_SAVE)=("v18.16b","v19.16b");
-
-$code.=<<___;
-#ifndef	__KERNEL__
-.type	sha256_block_armv8,%function
-.align	6
-sha256_block_armv8:
-.Lv8_entry:
-	stp		x29,x30,[sp,#-16]!
-	add		x29,sp,#0
-
-	ld1.32		{$ABCD,$EFGH},[$ctx]
-	adr		$Ktbl,.LK256
-
-.Loop_hw:
-	ld1		{@MSG[0]-@MSG[3]},[$inp],#64
-	sub		$num,$num,#1
-	ld1.32		{$W0},[$Ktbl],#16
-	rev32		@MSG[0],@MSG[0]
-	rev32		@MSG[1],@MSG[1]
-	rev32		@MSG[2],@MSG[2]
-	rev32		@MSG[3],@MSG[3]
-	orr		$ABCD_SAVE,$ABCD,$ABCD		// offload
-	orr		$EFGH_SAVE,$EFGH,$EFGH
-___
-for($i=0;$i<12;$i++) {
-$code.=<<___;
-	ld1.32		{$W1},[$Ktbl],#16
-	add.i32		$W0,$W0,@MSG[0]
-	sha256su0	@MSG[0],@MSG[1]
-	orr		$abcd,$ABCD,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-	sha256su1	@MSG[0],@MSG[2],@MSG[3]
-___
-	($W0,$W1)=($W1,$W0);	push(@MSG,shift(@MSG));
-}
-$code.=<<___;
-	ld1.32		{$W1},[$Ktbl],#16
-	add.i32		$W0,$W0,@MSG[0]
-	orr		$abcd,$ABCD,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-
-	ld1.32		{$W0},[$Ktbl],#16
-	add.i32		$W1,$W1,@MSG[1]
-	orr		$abcd,$ABCD,$ABCD
-	sha256h		$ABCD,$EFGH,$W1
-	sha256h2	$EFGH,$abcd,$W1
-
-	ld1.32		{$W1},[$Ktbl]
-	add.i32		$W0,$W0,@MSG[2]
-	sub		$Ktbl,$Ktbl,#$rounds*$SZ-16	// rewind
-	orr		$abcd,$ABCD,$ABCD
-	sha256h		$ABCD,$EFGH,$W0
-	sha256h2	$EFGH,$abcd,$W0
-
-	add.i32		$W1,$W1,@MSG[3]
-	orr		$abcd,$ABCD,$ABCD
-	sha256h		$ABCD,$EFGH,$W1
-	sha256h2	$EFGH,$abcd,$W1
-
-	add.i32		$ABCD,$ABCD,$ABCD_SAVE
-	add.i32		$EFGH,$EFGH,$EFGH_SAVE
-
-	cbnz		$num,.Loop_hw
-
-	st1.32		{$ABCD,$EFGH},[$ctx]
-
-	ldr		x29,[sp],#16
-	ret
-.size	sha256_block_armv8,.-sha256_block_armv8
-#endif
-___
-}
-
-if ($SZ==4) {	######################################### NEON stuff #
-# You'll surely note a lot of similarities with sha256-armv4 module,
-# and of course it's not a coincidence. sha256-armv4 was used as
-# initial template, but was adapted for ARMv8 instruction set and
-# extensively re-tuned for all-round performance.
-
-my @V = ($A,$B,$C,$D,$E,$F,$G,$H) = map("w$_",(3..10));
-my ($t0,$t1,$t2,$t3,$t4) = map("w$_",(11..15));
-my $Ktbl="x16";
-my $Xfer="x17";
-my @X = map("q$_",(0..3));
-my ($T0,$T1,$T2,$T3,$T4,$T5,$T6,$T7) = map("q$_",(4..7,16..19));
-my $j=0;
-
-sub AUTOLOAD()          # thunk [simplified] x86-style perlasm
-{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
-  my $arg = pop;
-    $arg = "#$arg" if ($arg*1 eq $arg);
-    $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
-}
-
-sub Dscalar { shift =~ m|[qv]([0-9]+)|?"d$1":""; }
-sub Dlo     { shift =~ m|[qv]([0-9]+)|?"v$1.d[0]":""; }
-sub Dhi     { shift =~ m|[qv]([0-9]+)|?"v$1.d[1]":""; }
-
-sub Xupdate()
-{ use integer;
-  my $body = shift;
-  my @insns = (&$body,&$body,&$body,&$body);
-  my ($a,$b,$c,$d,$e,$f,$g,$h);
-
-	&ext_8		($T0,@X[0],@X[1],4);	# X[1..4]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&ext_8		($T3,@X[2],@X[3],4);	# X[9..12]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&mov		(&Dscalar($T7),&Dhi(@X[3]));	# X[14..15]
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&ushr_32	($T2,$T0,$sigma0[0]);
-	 eval(shift(@insns));
-	&ushr_32	($T1,$T0,$sigma0[2]);
-	 eval(shift(@insns));
-	&add_32 	(@X[0],@X[0],$T3);	# X[0..3] += X[9..12]
-	 eval(shift(@insns));
-	&sli_32		($T2,$T0,32-$sigma0[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&ushr_32	($T3,$T0,$sigma0[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&eor_8		($T1,$T1,$T2);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&sli_32		($T3,$T0,32-$sigma0[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &ushr_32	($T4,$T7,$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&eor_8		($T1,$T1,$T3);		# sigma0(X[1..4])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &sli_32	($T4,$T7,32-$sigma1[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &ushr_32	($T5,$T7,$sigma1[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &ushr_32	($T3,$T7,$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&add_32		(@X[0],@X[0],$T1);	# X[0..3] += sigma0(X[1..4])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &sli_u32	($T3,$T7,32-$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &eor_8	($T5,$T5,$T4);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &eor_8	($T5,$T5,$T3);		# sigma1(X[14..15])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&add_32		(@X[0],@X[0],$T5);	# X[0..1] += sigma1(X[14..15])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &ushr_32	($T6,@X[0],$sigma1[0]);
-	 eval(shift(@insns));
-	  &ushr_32	($T7,@X[0],$sigma1[2]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &sli_32	($T6,@X[0],32-$sigma1[0]);
-	 eval(shift(@insns));
-	  &ushr_32	($T5,@X[0],$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &eor_8	($T7,$T7,$T6);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	  &sli_32	($T5,@X[0],32-$sigma1[1]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&ld1_32		("{$T0}","[$Ktbl], #16");
-	 eval(shift(@insns));
-	  &eor_8	($T7,$T7,$T5);		# sigma1(X[16..17])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&eor_8		($T5,$T5,$T5);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&mov		(&Dhi($T5), &Dlo($T7));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&add_32		(@X[0],@X[0],$T5);	# X[2..3] += sigma1(X[16..17])
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&add_32		($T0,$T0,@X[0]);
-	 while($#insns>=1) { eval(shift(@insns)); }
-	&st1_32		("{$T0}","[$Xfer], #16");
-	 eval(shift(@insns));
-
-	push(@X,shift(@X));		# "rotate" X[]
-}
-
-sub Xpreload()
-{ use integer;
-  my $body = shift;
-  my @insns = (&$body,&$body,&$body,&$body);
-  my ($a,$b,$c,$d,$e,$f,$g,$h);
-
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&ld1_8		("{@X[0]}","[$inp],#16");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&ld1_32		("{$T0}","[$Ktbl],#16");
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&rev32		(@X[0],@X[0]);
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	 eval(shift(@insns));
-	&add_32		($T0,$T0,@X[0]);
-	 foreach (@insns) { eval; }	# remaining instructions
-	&st1_32		("{$T0}","[$Xfer], #16");
-
-	push(@X,shift(@X));		# "rotate" X[]
-}
-
-sub body_00_15 () {
-	(
-	'($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
-	'&add	($h,$h,$t1)',			# h+=X[i]+K[i]
-	'&add	($a,$a,$t4);'.			# h+=Sigma0(a) from the past
-	'&and	($t1,$f,$e)',
-	'&bic	($t4,$g,$e)',
-	'&eor	($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
-	'&add	($a,$a,$t2)',			# h+=Maj(a,b,c) from the past
-	'&orr	($t1,$t1,$t4)',			# Ch(e,f,g)
-	'&eor	($t0,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))',	# Sigma1(e)
-	'&eor	($t4,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
-	'&add	($h,$h,$t1)',			# h+=Ch(e,f,g)
-	'&ror	($t0,$t0,"#$Sigma1[0]")',
-	'&eor	($t2,$a,$b)',			# a^b, b^c in next round
-	'&eor	($t4,$t4,$a,"ror#".($Sigma0[2]-$Sigma0[0]))',	# Sigma0(a)
-	'&add	($h,$h,$t0)',			# h+=Sigma1(e)
-	'&ldr	($t1,sprintf "[sp,#%d]",4*(($j+1)&15))	if (($j&15)!=15);'.
-	'&ldr	($t1,"[$Ktbl]")				if ($j==15);'.
-	'&and	($t3,$t3,$t2)',			# (b^c)&=(a^b)
-	'&ror	($t4,$t4,"#$Sigma0[0]")',
-	'&add	($d,$d,$h)',			# d+=h
-	'&eor	($t3,$t3,$b)',			# Maj(a,b,c)
-	'$j++;	unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
-	)
-}
-
-$code.=<<___;
-#ifdef	__KERNEL__
-.globl	sha256_block_neon
-#endif
-.type	sha256_block_neon,%function
-.align	4
-sha256_block_neon:
-.Lneon_entry:
-	stp	x29, x30, [sp, #-16]!
-	mov	x29, sp
-	sub	sp,sp,#16*4
-
-	adr	$Ktbl,.LK256
-	add	$num,$inp,$num,lsl#6	// len to point at the end of inp
-
-	ld1.8	{@X[0]},[$inp], #16
-	ld1.8	{@X[1]},[$inp], #16
-	ld1.8	{@X[2]},[$inp], #16
-	ld1.8	{@X[3]},[$inp], #16
-	ld1.32	{$T0},[$Ktbl], #16
-	ld1.32	{$T1},[$Ktbl], #16
-	ld1.32	{$T2},[$Ktbl], #16
-	ld1.32	{$T3},[$Ktbl], #16
-	rev32	@X[0],@X[0]		// yes, even on
-	rev32	@X[1],@X[1]		// big-endian
-	rev32	@X[2],@X[2]
-	rev32	@X[3],@X[3]
-	mov	$Xfer,sp
-	add.32	$T0,$T0,@X[0]
-	add.32	$T1,$T1,@X[1]
-	add.32	$T2,$T2,@X[2]
-	st1.32	{$T0-$T1},[$Xfer], #32
-	add.32	$T3,$T3,@X[3]
-	st1.32	{$T2-$T3},[$Xfer]
-	sub	$Xfer,$Xfer,#32
-
-	ldp	$A,$B,[$ctx]
-	ldp	$C,$D,[$ctx,#8]
-	ldp	$E,$F,[$ctx,#16]
-	ldp	$G,$H,[$ctx,#24]
-	ldr	$t1,[sp,#0]
-	mov	$t2,wzr
-	eor	$t3,$B,$C
-	mov	$t4,wzr
-	b	.L_00_48
-
-.align	4
-.L_00_48:
-___
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-	&Xupdate(\&body_00_15);
-$code.=<<___;
-	cmp	$t1,#0				// check for K256 terminator
-	ldr	$t1,[sp,#0]
-	sub	$Xfer,$Xfer,#64
-	bne	.L_00_48
-
-	sub	$Ktbl,$Ktbl,#256		// rewind $Ktbl
-	cmp	$inp,$num
-	mov	$Xfer, #64
-	csel	$Xfer, $Xfer, xzr, eq
-	sub	$inp,$inp,$Xfer			// avoid SEGV
-	mov	$Xfer,sp
-___
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-	&Xpreload(\&body_00_15);
-$code.=<<___;
-	add	$A,$A,$t4			// h+=Sigma0(a) from the past
-	ldp	$t0,$t1,[$ctx,#0]
-	add	$A,$A,$t2			// h+=Maj(a,b,c) from the past
-	ldp	$t2,$t3,[$ctx,#8]
-	add	$A,$A,$t0			// accumulate
-	add	$B,$B,$t1
-	ldp	$t0,$t1,[$ctx,#16]
-	add	$C,$C,$t2
-	add	$D,$D,$t3
-	ldp	$t2,$t3,[$ctx,#24]
-	add	$E,$E,$t0
-	add	$F,$F,$t1
-	 ldr	$t1,[sp,#0]
-	stp	$A,$B,[$ctx,#0]
-	add	$G,$G,$t2
-	 mov	$t2,wzr
-	stp	$C,$D,[$ctx,#8]
-	add	$H,$H,$t3
-	stp	$E,$F,[$ctx,#16]
-	 eor	$t3,$B,$C
-	stp	$G,$H,[$ctx,#24]
-	 mov	$t4,wzr
-	 mov	$Xfer,sp
-	b.ne	.L_00_48
-
-	ldr	x29,[x29]
-	add	sp,sp,#16*4+16
-	ret
-.size	sha256_block_neon,.-sha256_block_neon
-___
-}
-
-$code.=<<___;
-#ifndef	__KERNEL__
-.comm	OPENSSL_armcap_P,4,4
-#endif
-___
-
-{   my  %opcode = (
-	"sha256h"	=> 0x5e004000,	"sha256h2"	=> 0x5e005000,
-	"sha256su0"	=> 0x5e282800,	"sha256su1"	=> 0x5e006000	);
-
-    sub unsha256 {
-	my ($mnemonic,$arg)=@_;
-
-	$arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
-	&&
-	sprintf ".inst\t0x%08x\t//%s %s",
-			$opcode{$mnemonic}|$1|($2<<5)|($3<<16),
-			$mnemonic,$arg;
-    }
-}
-
-open SELF,$0;
-while(<SELF>) {
-        next if (/^#!/);
-        last if (!s/^#/\/\// and !/^$/);
-        print;
-}
-close SELF;
-
-foreach(split("\n",$code)) {
-
-	s/\`([^\`]*)\`/eval($1)/ge;
-
-	s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/ge;
-
-	s/\bq([0-9]+)\b/v$1.16b/g;		# old->new registers
-
-	s/\.[ui]?8(\s)/$1/;
-	s/\.\w?32\b//		and s/\.16b/\.4s/g;
-	m/(ld|st)1[^\[]+\[0\]/	and s/\.4s/\.s/g;
-
-	print $_,"\n";
-}
-
-close STDOUT;
diff --git a/arch/arm64/crypto/sha512-ce-core.S b/arch/arm64/crypto/sha512-ce-core.S
deleted file mode 100644
index 91ef68b15fcc..000000000000
--- a/arch/arm64/crypto/sha512-ce-core.S
+++ /dev/null
@@ -1,206 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * sha512-ce-core.S - core SHA-384/SHA-512 transform using v8 Crypto Extensions
- *
- * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.irp		b,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
-	.set		.Lq\b, \b
-	.set		.Lv\b\().2d, \b
-	.endr
-
-	.macro		sha512h, rd, rn, rm
-	.inst		0xce608000 | .L\rd | (.L\rn << 5) | (.L\rm << 16)
-	.endm
-
-	.macro		sha512h2, rd, rn, rm
-	.inst		0xce608400 | .L\rd | (.L\rn << 5) | (.L\rm << 16)
-	.endm
-
-	.macro		sha512su0, rd, rn
-	.inst		0xcec08000 | .L\rd | (.L\rn << 5)
-	.endm
-
-	.macro		sha512su1, rd, rn, rm
-	.inst		0xce608800 | .L\rd | (.L\rn << 5) | (.L\rm << 16)
-	.endm
-
-	/*
-	 * The SHA-512 round constants
-	 */
-	.section	".rodata", "a"
-	.align		4
-.Lsha512_rcon:
-	.quad		0x428a2f98d728ae22, 0x7137449123ef65cd
-	.quad		0xb5c0fbcfec4d3b2f, 0xe9b5dba58189dbbc
-	.quad		0x3956c25bf348b538, 0x59f111f1b605d019
-	.quad		0x923f82a4af194f9b, 0xab1c5ed5da6d8118
-	.quad		0xd807aa98a3030242, 0x12835b0145706fbe
-	.quad		0x243185be4ee4b28c, 0x550c7dc3d5ffb4e2
-	.quad		0x72be5d74f27b896f, 0x80deb1fe3b1696b1
-	.quad		0x9bdc06a725c71235, 0xc19bf174cf692694
-	.quad		0xe49b69c19ef14ad2, 0xefbe4786384f25e3
-	.quad		0x0fc19dc68b8cd5b5, 0x240ca1cc77ac9c65
-	.quad		0x2de92c6f592b0275, 0x4a7484aa6ea6e483
-	.quad		0x5cb0a9dcbd41fbd4, 0x76f988da831153b5
-	.quad		0x983e5152ee66dfab, 0xa831c66d2db43210
-	.quad		0xb00327c898fb213f, 0xbf597fc7beef0ee4
-	.quad		0xc6e00bf33da88fc2, 0xd5a79147930aa725
-	.quad		0x06ca6351e003826f, 0x142929670a0e6e70
-	.quad		0x27b70a8546d22ffc, 0x2e1b21385c26c926
-	.quad		0x4d2c6dfc5ac42aed, 0x53380d139d95b3df
-	.quad		0x650a73548baf63de, 0x766a0abb3c77b2a8
-	.quad		0x81c2c92e47edaee6, 0x92722c851482353b
-	.quad		0xa2bfe8a14cf10364, 0xa81a664bbc423001
-	.quad		0xc24b8b70d0f89791, 0xc76c51a30654be30
-	.quad		0xd192e819d6ef5218, 0xd69906245565a910
-	.quad		0xf40e35855771202a, 0x106aa07032bbd1b8
-	.quad		0x19a4c116b8d2d0c8, 0x1e376c085141ab53
-	.quad		0x2748774cdf8eeb99, 0x34b0bcb5e19b48a8
-	.quad		0x391c0cb3c5c95a63, 0x4ed8aa4ae3418acb
-	.quad		0x5b9cca4f7763e373, 0x682e6ff3d6b2b8a3
-	.quad		0x748f82ee5defb2fc, 0x78a5636f43172f60
-	.quad		0x84c87814a1f0ab72, 0x8cc702081a6439ec
-	.quad		0x90befffa23631e28, 0xa4506cebde82bde9
-	.quad		0xbef9a3f7b2c67915, 0xc67178f2e372532b
-	.quad		0xca273eceea26619c, 0xd186b8c721c0c207
-	.quad		0xeada7dd6cde0eb1e, 0xf57d4f7fee6ed178
-	.quad		0x06f067aa72176fba, 0x0a637dc5a2c898a6
-	.quad		0x113f9804bef90dae, 0x1b710b35131c471b
-	.quad		0x28db77f523047d84, 0x32caab7b40c72493
-	.quad		0x3c9ebe0a15c9bebc, 0x431d67c49c100d4c
-	.quad		0x4cc5d4becb3e42b6, 0x597f299cfc657e2a
-	.quad		0x5fcb6fab3ad6faec, 0x6c44198c4a475817
-
-	.macro		dround, i0, i1, i2, i3, i4, rc0, rc1, in0, in1, in2, in3, in4
-	.ifnb		\rc1
-	ld1		{v\rc1\().2d}, [x4], #16
-	.endif
-	add		v5.2d, v\rc0\().2d, v\in0\().2d
-	ext		v6.16b, v\i2\().16b, v\i3\().16b, #8
-	ext		v5.16b, v5.16b, v5.16b, #8
-	ext		v7.16b, v\i1\().16b, v\i2\().16b, #8
-	add		v\i3\().2d, v\i3\().2d, v5.2d
-	.ifnb		\in1
-	ext		v5.16b, v\in3\().16b, v\in4\().16b, #8
-	sha512su0	v\in0\().2d, v\in1\().2d
-	.endif
-	sha512h		q\i3, q6, v7.2d
-	.ifnb		\in1
-	sha512su1	v\in0\().2d, v\in2\().2d, v5.2d
-	.endif
-	add		v\i4\().2d, v\i1\().2d, v\i3\().2d
-	sha512h2	q\i3, q\i1, v\i0\().2d
-	.endm
-
-	/*
-	 * int __sha512_ce_transform(struct sha512_state *sst, u8 const *src,
-	 *			     int blocks)
-	 */
-	.text
-SYM_FUNC_START(__sha512_ce_transform)
-	/* load state */
-	ld1		{v8.2d-v11.2d}, [x0]
-
-	/* load first 4 round constants */
-	adr_l		x3, .Lsha512_rcon
-	ld1		{v20.2d-v23.2d}, [x3], #64
-
-	/* load input */
-0:	ld1		{v12.2d-v15.2d}, [x1], #64
-	ld1		{v16.2d-v19.2d}, [x1], #64
-	sub		w2, w2, #1
-
-CPU_LE(	rev64		v12.16b, v12.16b	)
-CPU_LE(	rev64		v13.16b, v13.16b	)
-CPU_LE(	rev64		v14.16b, v14.16b	)
-CPU_LE(	rev64		v15.16b, v15.16b	)
-CPU_LE(	rev64		v16.16b, v16.16b	)
-CPU_LE(	rev64		v17.16b, v17.16b	)
-CPU_LE(	rev64		v18.16b, v18.16b	)
-CPU_LE(	rev64		v19.16b, v19.16b	)
-
-	mov		x4, x3				// rc pointer
-
-	mov		v0.16b, v8.16b
-	mov		v1.16b, v9.16b
-	mov		v2.16b, v10.16b
-	mov		v3.16b, v11.16b
-
-	// v0  ab  cd  --  ef  gh  ab
-	// v1  cd  --  ef  gh  ab  cd
-	// v2  ef  gh  ab  cd  --  ef
-	// v3  gh  ab  cd  --  ef  gh
-	// v4  --  ef  gh  ab  cd  --
-
-	dround		0, 1, 2, 3, 4, 20, 24, 12, 13, 19, 16, 17
-	dround		3, 0, 4, 2, 1, 21, 25, 13, 14, 12, 17, 18
-	dround		2, 3, 1, 4, 0, 22, 26, 14, 15, 13, 18, 19
-	dround		4, 2, 0, 1, 3, 23, 27, 15, 16, 14, 19, 12
-	dround		1, 4, 3, 0, 2, 24, 28, 16, 17, 15, 12, 13
-
-	dround		0, 1, 2, 3, 4, 25, 29, 17, 18, 16, 13, 14
-	dround		3, 0, 4, 2, 1, 26, 30, 18, 19, 17, 14, 15
-	dround		2, 3, 1, 4, 0, 27, 31, 19, 12, 18, 15, 16
-	dround		4, 2, 0, 1, 3, 28, 24, 12, 13, 19, 16, 17
-	dround		1, 4, 3, 0, 2, 29, 25, 13, 14, 12, 17, 18
-
-	dround		0, 1, 2, 3, 4, 30, 26, 14, 15, 13, 18, 19
-	dround		3, 0, 4, 2, 1, 31, 27, 15, 16, 14, 19, 12
-	dround		2, 3, 1, 4, 0, 24, 28, 16, 17, 15, 12, 13
-	dround		4, 2, 0, 1, 3, 25, 29, 17, 18, 16, 13, 14
-	dround		1, 4, 3, 0, 2, 26, 30, 18, 19, 17, 14, 15
-
-	dround		0, 1, 2, 3, 4, 27, 31, 19, 12, 18, 15, 16
-	dround		3, 0, 4, 2, 1, 28, 24, 12, 13, 19, 16, 17
-	dround		2, 3, 1, 4, 0, 29, 25, 13, 14, 12, 17, 18
-	dround		4, 2, 0, 1, 3, 30, 26, 14, 15, 13, 18, 19
-	dround		1, 4, 3, 0, 2, 31, 27, 15, 16, 14, 19, 12
-
-	dround		0, 1, 2, 3, 4, 24, 28, 16, 17, 15, 12, 13
-	dround		3, 0, 4, 2, 1, 25, 29, 17, 18, 16, 13, 14
-	dround		2, 3, 1, 4, 0, 26, 30, 18, 19, 17, 14, 15
-	dround		4, 2, 0, 1, 3, 27, 31, 19, 12, 18, 15, 16
-	dround		1, 4, 3, 0, 2, 28, 24, 12, 13, 19, 16, 17
-
-	dround		0, 1, 2, 3, 4, 29, 25, 13, 14, 12, 17, 18
-	dround		3, 0, 4, 2, 1, 30, 26, 14, 15, 13, 18, 19
-	dround		2, 3, 1, 4, 0, 31, 27, 15, 16, 14, 19, 12
-	dround		4, 2, 0, 1, 3, 24, 28, 16, 17, 15, 12, 13
-	dround		1, 4, 3, 0, 2, 25, 29, 17, 18, 16, 13, 14
-
-	dround		0, 1, 2, 3, 4, 26, 30, 18, 19, 17, 14, 15
-	dround		3, 0, 4, 2, 1, 27, 31, 19, 12, 18, 15, 16
-	dround		2, 3, 1, 4, 0, 28, 24, 12
-	dround		4, 2, 0, 1, 3, 29, 25, 13
-	dround		1, 4, 3, 0, 2, 30, 26, 14
-
-	dround		0, 1, 2, 3, 4, 31, 27, 15
-	dround		3, 0, 4, 2, 1, 24,   , 16
-	dround		2, 3, 1, 4, 0, 25,   , 17
-	dround		4, 2, 0, 1, 3, 26,   , 18
-	dround		1, 4, 3, 0, 2, 27,   , 19
-
-	/* update state */
-	add		v8.2d, v8.2d, v0.2d
-	add		v9.2d, v9.2d, v1.2d
-	add		v10.2d, v10.2d, v2.2d
-	add		v11.2d, v11.2d, v3.2d
-
-	cond_yield	3f, x4, x5
-	/* handled all input blocks? */
-	cbnz		w2, 0b
-
-	/* store new state */
-3:	st1		{v8.2d-v11.2d}, [x0]
-	mov		w0, w2
-	ret
-SYM_FUNC_END(__sha512_ce_transform)
diff --git a/arch/arm64/crypto/sha512-ce-glue.c b/arch/arm64/crypto/sha512-ce-glue.c
deleted file mode 100644
index 071f64293227..000000000000
--- a/arch/arm64/crypto/sha512-ce-glue.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * sha512-ce-glue.c - SHA-384/SHA-512 using ARMv8 Crypto Extensions
- *
- * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
-#include <crypto/sha2.h>
-#include <crypto/sha512_base.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("sha384");
-MODULE_ALIAS_CRYPTO("sha512");
-
-asmlinkage int __sha512_ce_transform(struct sha512_state *sst, u8 const *src,
-				     int blocks);
-
-asmlinkage void sha512_block_data_order(u64 *digest, u8 const *src, int blocks);
-
-static void sha512_ce_transform(struct sha512_state *sst, u8 const *src,
-				int blocks)
-{
-	while (blocks) {
-		int rem;
-
-		kernel_neon_begin();
-		rem = __sha512_ce_transform(sst, src, blocks);
-		kernel_neon_end();
-		src += (blocks - rem) * SHA512_BLOCK_SIZE;
-		blocks = rem;
-	}
-}
-
-static void sha512_arm64_transform(struct sha512_state *sst, u8 const *src,
-				   int blocks)
-{
-	sha512_block_data_order(sst->state, src, blocks);
-}
-
-static int sha512_ce_update(struct shash_desc *desc, const u8 *data,
-			    unsigned int len)
-{
-	sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform
-						   : sha512_arm64_transform;
-
-	sha512_base_do_update(desc, data, len, fn);
-	return 0;
-}
-
-static int sha512_ce_finup(struct shash_desc *desc, const u8 *data,
-			   unsigned int len, u8 *out)
-{
-	sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform
-						   : sha512_arm64_transform;
-
-	sha512_base_do_update(desc, data, len, fn);
-	sha512_base_do_finalize(desc, fn);
-	return sha512_base_finish(desc, out);
-}
-
-static int sha512_ce_final(struct shash_desc *desc, u8 *out)
-{
-	sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform
-						   : sha512_arm64_transform;
-
-	sha512_base_do_finalize(desc, fn);
-	return sha512_base_finish(desc, out);
-}
-
-static struct shash_alg algs[] = { {
-	.init			= sha384_base_init,
-	.update			= sha512_ce_update,
-	.final			= sha512_ce_final,
-	.finup			= sha512_ce_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.digestsize		= SHA384_DIGEST_SIZE,
-	.base.cra_name		= "sha384",
-	.base.cra_driver_name	= "sha384-ce",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= SHA512_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-}, {
-	.init			= sha512_base_init,
-	.update			= sha512_ce_update,
-	.final			= sha512_ce_final,
-	.finup			= sha512_ce_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.digestsize		= SHA512_DIGEST_SIZE,
-	.base.cra_name		= "sha512",
-	.base.cra_driver_name	= "sha512-ce",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= SHA512_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-} };
-
-static int __init sha512_ce_mod_init(void)
-{
-	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
-}
-
-static void __exit sha512_ce_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_cpu_feature_match(SHA512, sha512_ce_mod_init);
-module_exit(sha512_ce_mod_fini);
diff --git a/arch/arm64/crypto/sha512-glue.c b/arch/arm64/crypto/sha512-glue.c
deleted file mode 100644
index 62f129dea83d..000000000000
--- a/arch/arm64/crypto/sha512-glue.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Linux/arm64 port of the OpenSSL SHA512 implementation for AArch64
- *
- * Copyright (c) 2016 Linaro Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <crypto/internal/hash.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <crypto/sha2.h>
-#include <crypto/sha512_base.h>
-#include <asm/neon.h>
-
-MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash for arm64");
-MODULE_AUTHOR("Andy Polyakov <appro@openssl.org>");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("sha384");
-MODULE_ALIAS_CRYPTO("sha512");
-
-asmlinkage void sha512_block_data_order(u64 *digest, const void *data,
-					unsigned int num_blks);
-EXPORT_SYMBOL(sha512_block_data_order);
-
-static void sha512_arm64_transform(struct sha512_state *sst, u8 const *src,
-				   int blocks)
-{
-	sha512_block_data_order(sst->state, src, blocks);
-}
-
-static int sha512_update(struct shash_desc *desc, const u8 *data,
-			 unsigned int len)
-{
-	return sha512_base_do_update(desc, data, len, sha512_arm64_transform);
-}
-
-static int sha512_finup(struct shash_desc *desc, const u8 *data,
-			unsigned int len, u8 *out)
-{
-	if (len)
-		sha512_base_do_update(desc, data, len, sha512_arm64_transform);
-	sha512_base_do_finalize(desc, sha512_arm64_transform);
-
-	return sha512_base_finish(desc, out);
-}
-
-static int sha512_final(struct shash_desc *desc, u8 *out)
-{
-	return sha512_finup(desc, NULL, 0, out);
-}
-
-static struct shash_alg algs[] = { {
-	.digestsize		= SHA512_DIGEST_SIZE,
-	.init			= sha512_base_init,
-	.update			= sha512_update,
-	.final			= sha512_final,
-	.finup			= sha512_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.base.cra_name		= "sha512",
-	.base.cra_driver_name	= "sha512-arm64",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= SHA512_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-}, {
-	.digestsize		= SHA384_DIGEST_SIZE,
-	.init			= sha384_base_init,
-	.update			= sha512_update,
-	.final			= sha512_final,
-	.finup			= sha512_finup,
-	.descsize		= sizeof(struct sha512_state),
-	.base.cra_name		= "sha384",
-	.base.cra_driver_name	= "sha384-arm64",
-	.base.cra_priority	= 150,
-	.base.cra_blocksize	= SHA384_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-} };
-
-static int __init sha512_mod_init(void)
-{
-	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
-}
-
-static void __exit sha512_mod_fini(void)
-{
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
-}
-
-module_init(sha512_mod_init);
-module_exit(sha512_mod_fini);
diff --git a/arch/arm64/crypto/sm3-ce-glue.c b/arch/arm64/crypto/sm3-ce-glue.c
index 1a71788c4cda..24c1fcfae072 100644
--- a/arch/arm64/crypto/sm3-ce-glue.c
+++ b/arch/arm64/crypto/sm3-ce-glue.c
@@ -5,17 +5,15 @@
  * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
  */
 
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/sm3.h>
 #include <crypto/sm3_base.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
+#include <asm/simd.h>
+
 MODULE_DESCRIPTION("SM3 secure hash using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
 MODULE_LICENSE("GPL v2");
@@ -26,50 +24,20 @@ asmlinkage void sm3_ce_transform(struct sm3_state *sst, u8 const *src,
 static int sm3_ce_update(struct shash_desc *desc, const u8 *data,
 			 unsigned int len)
 {
-	if (!crypto_simd_usable()) {
-		sm3_update(shash_desc_ctx(desc), data, len);
-		return 0;
-	}
-
-	kernel_neon_begin();
-	sm3_base_do_update(desc, data, len, sm3_ce_transform);
-	kernel_neon_end();
-
-	return 0;
-}
+	int remain;
 
-static int sm3_ce_final(struct shash_desc *desc, u8 *out)
-{
-	if (!crypto_simd_usable()) {
-		sm3_final(shash_desc_ctx(desc), out);
-		return 0;
+	scoped_ksimd() {
+		remain = sm3_base_do_update_blocks(desc, data, len, sm3_ce_transform);
 	}
-
-	kernel_neon_begin();
-	sm3_base_do_finalize(desc, sm3_ce_transform);
-	kernel_neon_end();
-
-	return sm3_base_finish(desc, out);
+	return remain;
 }
 
 static int sm3_ce_finup(struct shash_desc *desc, const u8 *data,
 			unsigned int len, u8 *out)
 {
-	if (!crypto_simd_usable()) {
-		struct sm3_state *sctx = shash_desc_ctx(desc);
-
-		if (len)
-			sm3_update(sctx, data, len);
-		sm3_final(sctx, out);
-		return 0;
+	scoped_ksimd() {
+		sm3_base_do_finup(desc, data, len, sm3_ce_transform);
 	}
-
-	kernel_neon_begin();
-	if (len)
-		sm3_base_do_update(desc, data, len, sm3_ce_transform);
-	sm3_base_do_finalize(desc, sm3_ce_transform);
-	kernel_neon_end();
-
 	return sm3_base_finish(desc, out);
 }
 
@@ -77,11 +45,12 @@ static struct shash_alg sm3_alg = {
 	.digestsize		= SM3_DIGEST_SIZE,
 	.init			= sm3_base_init,
 	.update			= sm3_ce_update,
-	.final			= sm3_ce_final,
 	.finup			= sm3_ce_finup,
-	.descsize		= sizeof(struct sm3_state),
+	.descsize		= SM3_STATE_SIZE,
 	.base.cra_name		= "sm3",
 	.base.cra_driver_name	= "sm3-ce",
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINUP_MAX,
 	.base.cra_blocksize	= SM3_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 	.base.cra_priority	= 400,
diff --git a/arch/arm64/crypto/sm3-neon-glue.c b/arch/arm64/crypto/sm3-neon-glue.c
index 8dd71ce79b69..15f30cc24f32 100644
--- a/arch/arm64/crypto/sm3-neon-glue.c
+++ b/arch/arm64/crypto/sm3-neon-glue.c
@@ -5,15 +5,12 @@
  * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
  */
 
-#include <asm/neon.h>
 #include <asm/simd.h>
-#include <linux/unaligned.h>
 #include <crypto/internal/hash.h>
-#include <crypto/internal/simd.h>
 #include <crypto/sm3.h>
 #include <crypto/sm3_base.h>
 #include <linux/cpufeature.h>
-#include <linux/crypto.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
 
@@ -23,50 +20,16 @@ asmlinkage void sm3_neon_transform(struct sm3_state *sst, u8 const *src,
 static int sm3_neon_update(struct shash_desc *desc, const u8 *data,
 			   unsigned int len)
 {
-	if (!crypto_simd_usable()) {
-		sm3_update(shash_desc_ctx(desc), data, len);
-		return 0;
-	}
-
-	kernel_neon_begin();
-	sm3_base_do_update(desc, data, len, sm3_neon_transform);
-	kernel_neon_end();
-
-	return 0;
-}
-
-static int sm3_neon_final(struct shash_desc *desc, u8 *out)
-{
-	if (!crypto_simd_usable()) {
-		sm3_final(shash_desc_ctx(desc), out);
-		return 0;
-	}
-
-	kernel_neon_begin();
-	sm3_base_do_finalize(desc, sm3_neon_transform);
-	kernel_neon_end();
-
-	return sm3_base_finish(desc, out);
+	scoped_ksimd()
+		return sm3_base_do_update_blocks(desc, data, len,
+						 sm3_neon_transform);
 }
 
 static int sm3_neon_finup(struct shash_desc *desc, const u8 *data,
 			  unsigned int len, u8 *out)
 {
-	if (!crypto_simd_usable()) {
-		struct sm3_state *sctx = shash_desc_ctx(desc);
-
-		if (len)
-			sm3_update(sctx, data, len);
-		sm3_final(sctx, out);
-		return 0;
-	}
-
-	kernel_neon_begin();
-	if (len)
-		sm3_base_do_update(desc, data, len, sm3_neon_transform);
-	sm3_base_do_finalize(desc, sm3_neon_transform);
-	kernel_neon_end();
-
+	scoped_ksimd()
+		sm3_base_do_finup(desc, data, len, sm3_neon_transform);
 	return sm3_base_finish(desc, out);
 }
 
@@ -74,11 +37,12 @@ static struct shash_alg sm3_alg = {
 	.digestsize		= SM3_DIGEST_SIZE,
 	.init			= sm3_base_init,
 	.update			= sm3_neon_update,
-	.final			= sm3_neon_final,
 	.finup			= sm3_neon_finup,
-	.descsize		= sizeof(struct sm3_state),
+	.descsize		= SM3_STATE_SIZE,
 	.base.cra_name		= "sm3",
 	.base.cra_driver_name	= "sm3-neon",
+	.base.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+				  CRYPTO_AHASH_ALG_FINUP_MAX,
 	.base.cra_blocksize	= SM3_BLOCK_SIZE,
 	.base.cra_module	= THIS_MODULE,
 	.base.cra_priority	= 200,
diff --git a/arch/arm64/crypto/sm4-ce-ccm-glue.c b/arch/arm64/crypto/sm4-ce-ccm-glue.c
index 5e7e17bbec81..332f02167a96 100644
--- a/arch/arm64/crypto/sm4-ce-ccm-glue.c
+++ b/arch/arm64/crypto/sm4-ce-ccm-glue.c
@@ -11,7 +11,7 @@
 #include <linux/crypto.h>
 #include <linux/kernel.h>
 #include <linux/cpufeature.h>
-#include <asm/neon.h>
+#include <asm/simd.h>
 #include <crypto/scatterwalk.h>
 #include <crypto/internal/aead.h>
 #include <crypto/internal/skcipher.h>
@@ -35,10 +35,9 @@ static int ccm_setkey(struct crypto_aead *tfm, const u8 *key,
 	if (key_len != SM4_KEY_SIZE)
 		return -EINVAL;
 
-	kernel_neon_begin();
-	sm4_ce_expand_key(key, ctx->rkey_enc, ctx->rkey_dec,
-			  crypto_sm4_fk, crypto_sm4_ck);
-	kernel_neon_end();
+	scoped_ksimd()
+		sm4_ce_expand_key(key, ctx->rkey_enc, ctx->rkey_dec,
+				  crypto_sm4_fk, crypto_sm4_ck);
 
 	return 0;
 }
@@ -112,17 +111,12 @@ static void ccm_calculate_auth_mac(struct aead_request *req, u8 mac[])
 	scatterwalk_start(&walk, req->src);
 
 	do {
-		u32 n = scatterwalk_clamp(&walk, assoclen);
-		u8 *p, *ptr;
+		unsigned int n, orig_n;
+		const u8 *p;
 
-		if (!n) {
-			scatterwalk_start(&walk, sg_next(walk.sg));
-			n = scatterwalk_clamp(&walk, assoclen);
-		}
-
-		p = ptr = scatterwalk_map(&walk);
-		assoclen -= n;
-		scatterwalk_advance(&walk, n);
+		orig_n = scatterwalk_next(&walk, assoclen);
+		p = walk.addr;
+		n = orig_n;
 
 		while (n > 0) {
 			unsigned int l, nblocks;
@@ -136,9 +130,9 @@ static void ccm_calculate_auth_mac(struct aead_request *req, u8 mac[])
 				} else {
 					nblocks = n / SM4_BLOCK_SIZE;
 					sm4_ce_cbcmac_update(ctx->rkey_enc,
-							     mac, ptr, nblocks);
+							     mac, p, nblocks);
 
-					ptr += nblocks * SM4_BLOCK_SIZE;
+					p += nblocks * SM4_BLOCK_SIZE;
 					n %= SM4_BLOCK_SIZE;
 
 					continue;
@@ -147,15 +141,15 @@ static void ccm_calculate_auth_mac(struct aead_request *req, u8 mac[])
 
 			l = min(n, SM4_BLOCK_SIZE - len);
 			if (l) {
-				crypto_xor(mac + len, ptr, l);
+				crypto_xor(mac + len, p, l);
 				len += l;
-				ptr += l;
+				p += l;
 				n -= l;
 			}
 		}
 
-		scatterwalk_unmap(p);
-		scatterwalk_done(&walk, 0, assoclen);
+		scatterwalk_done_src(&walk, orig_n);
+		assoclen -= orig_n;
 	} while (assoclen);
 }
 
@@ -172,39 +166,23 @@ static int ccm_crypt(struct aead_request *req, struct skcipher_walk *walk,
 	memcpy(ctr0, walk->iv, SM4_BLOCK_SIZE);
 	crypto_inc(walk->iv, SM4_BLOCK_SIZE);
 
-	kernel_neon_begin();
-
-	if (req->assoclen)
-		ccm_calculate_auth_mac(req, mac);
-
-	while (walk->nbytes && walk->nbytes != walk->total) {
-		unsigned int tail = walk->nbytes % SM4_BLOCK_SIZE;
-
-		sm4_ce_ccm_crypt(rkey_enc, walk->dst.virt.addr,
-				 walk->src.virt.addr, walk->iv,
-				 walk->nbytes - tail, mac);
-
-		kernel_neon_end();
+	scoped_ksimd() {
+		if (req->assoclen)
+			ccm_calculate_auth_mac(req, mac);
 
-		err = skcipher_walk_done(walk, tail);
+		while (walk->nbytes) {
+			unsigned int tail = walk->nbytes % SM4_BLOCK_SIZE;
 
-		kernel_neon_begin();
-	}
-
-	if (walk->nbytes) {
-		sm4_ce_ccm_crypt(rkey_enc, walk->dst.virt.addr,
-				 walk->src.virt.addr, walk->iv,
-				 walk->nbytes, mac);
-
-		sm4_ce_ccm_final(rkey_enc, ctr0, mac);
+			if (walk->nbytes == walk->total)
+				tail = 0;
 
-		kernel_neon_end();
+			sm4_ce_ccm_crypt(rkey_enc, walk->dst.virt.addr,
+					 walk->src.virt.addr, walk->iv,
+					 walk->nbytes - tail, mac);
 
-		err = skcipher_walk_done(walk, 0);
-	} else {
+			err = skcipher_walk_done(walk, tail);
+		}
 		sm4_ce_ccm_final(rkey_enc, ctr0, mac);
-
-		kernel_neon_end();
 	}
 
 	return err;
diff --git a/arch/arm64/crypto/sm4-ce-cipher-glue.c b/arch/arm64/crypto/sm4-ce-cipher-glue.c
index c31d76fb5a17..bceec833ef4e 100644
--- a/arch/arm64/crypto/sm4-ce-cipher-glue.c
+++ b/arch/arm64/crypto/sm4-ce-cipher-glue.c
@@ -32,9 +32,8 @@ static void sm4_ce_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 	if (!crypto_simd_usable()) {
 		sm4_crypt_block(ctx->rkey_enc, out, in);
 	} else {
-		kernel_neon_begin();
-		sm4_ce_do_crypt(ctx->rkey_enc, out, in);
-		kernel_neon_end();
+		scoped_ksimd()
+			sm4_ce_do_crypt(ctx->rkey_enc, out, in);
 	}
 }
 
@@ -45,9 +44,8 @@ static void sm4_ce_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 	if (!crypto_simd_usable()) {
 		sm4_crypt_block(ctx->rkey_dec, out, in);
 	} else {
-		kernel_neon_begin();
-		sm4_ce_do_crypt(ctx->rkey_dec, out, in);
-		kernel_neon_end();
+		scoped_ksimd()
+			sm4_ce_do_crypt(ctx->rkey_dec, out, in);
 	}
 }
 
diff --git a/arch/arm64/crypto/sm4-ce-gcm-glue.c b/arch/arm64/crypto/sm4-ce-gcm-glue.c
index 73bfb6972d3a..ef06f4f768a1 100644
--- a/arch/arm64/crypto/sm4-ce-gcm-glue.c
+++ b/arch/arm64/crypto/sm4-ce-gcm-glue.c
@@ -11,7 +11,7 @@
 #include <linux/crypto.h>
 #include <linux/kernel.h>
 #include <linux/cpufeature.h>
-#include <asm/neon.h>
+#include <asm/simd.h>
 #include <crypto/b128ops.h>
 #include <crypto/scatterwalk.h>
 #include <crypto/internal/aead.h>
@@ -48,13 +48,11 @@ static int gcm_setkey(struct crypto_aead *tfm, const u8 *key,
 	if (key_len != SM4_KEY_SIZE)
 		return -EINVAL;
 
-	kernel_neon_begin();
-
-	sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
-			  crypto_sm4_fk, crypto_sm4_ck);
-	sm4_ce_pmull_ghash_setup(ctx->key.rkey_enc, ctx->ghash_table);
-
-	kernel_neon_end();
+	scoped_ksimd() {
+		sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
+				crypto_sm4_fk, crypto_sm4_ck);
+		sm4_ce_pmull_ghash_setup(ctx->key.rkey_enc, ctx->ghash_table);
+	}
 	return 0;
 }
 
@@ -82,20 +80,15 @@ static void gcm_calculate_auth_mac(struct aead_request *req, u8 ghash[])
 	scatterwalk_start(&walk, req->src);
 
 	do {
-		u32 n = scatterwalk_clamp(&walk, assoclen);
-		u8 *p, *ptr;
-
-		if (!n) {
-			scatterwalk_start(&walk, sg_next(walk.sg));
-			n = scatterwalk_clamp(&walk, assoclen);
-		}
+		unsigned int n, orig_n;
+		const u8 *p;
 
-		p = ptr = scatterwalk_map(&walk);
-		assoclen -= n;
-		scatterwalk_advance(&walk, n);
+		orig_n = scatterwalk_next(&walk, assoclen);
+		p = walk.addr;
+		n = orig_n;
 
 		if (n + buflen < GHASH_BLOCK_SIZE) {
-			memcpy(&buffer[buflen], ptr, n);
+			memcpy(&buffer[buflen], p, n);
 			buflen += n;
 		} else {
 			unsigned int nblocks;
@@ -103,8 +96,8 @@ static void gcm_calculate_auth_mac(struct aead_request *req, u8 ghash[])
 			if (buflen) {
 				unsigned int l = GHASH_BLOCK_SIZE - buflen;
 
-				memcpy(&buffer[buflen], ptr, l);
-				ptr += l;
+				memcpy(&buffer[buflen], p, l);
+				p += l;
 				n -= l;
 
 				pmull_ghash_update(ctx->ghash_table, ghash,
@@ -114,17 +107,17 @@ static void gcm_calculate_auth_mac(struct aead_request *req, u8 ghash[])
 			nblocks = n / GHASH_BLOCK_SIZE;
 			if (nblocks) {
 				pmull_ghash_update(ctx->ghash_table, ghash,
-						   ptr, nblocks);
-				ptr += nblocks * GHASH_BLOCK_SIZE;
+						   p, nblocks);
+				p += nblocks * GHASH_BLOCK_SIZE;
 			}
 
 			buflen = n % GHASH_BLOCK_SIZE;
 			if (buflen)
-				memcpy(&buffer[0], ptr, buflen);
+				memcpy(&buffer[0], p, buflen);
 		}
 
-		scatterwalk_unmap(p);
-		scatterwalk_done(&walk, 0, assoclen);
+		scatterwalk_done_src(&walk, orig_n);
+		assoclen -= orig_n;
 	} while (assoclen);
 
 	/* padding with '0' */
@@ -154,44 +147,28 @@ static int gcm_crypt(struct aead_request *req, struct skcipher_walk *walk,
 	memcpy(iv, req->iv, GCM_IV_SIZE);
 	put_unaligned_be32(2, iv + GCM_IV_SIZE);
 
-	kernel_neon_begin();
+	scoped_ksimd() {
+		if (req->assoclen)
+			gcm_calculate_auth_mac(req, ghash);
 
-	if (req->assoclen)
-		gcm_calculate_auth_mac(req, ghash);
+		do {
+			unsigned int tail = walk->nbytes % SM4_BLOCK_SIZE;
+			const u8 *src = walk->src.virt.addr;
+			u8 *dst = walk->dst.virt.addr;
+			const u8 *l = NULL;
 
-	while (walk->nbytes) {
-		unsigned int tail = walk->nbytes % SM4_BLOCK_SIZE;
-		const u8 *src = walk->src.virt.addr;
-		u8 *dst = walk->dst.virt.addr;
+			if (walk->nbytes == walk->total) {
+				l = (const u8 *)&lengths;
+				tail = 0;
+			}
 
-		if (walk->nbytes == walk->total) {
 			sm4_ce_pmull_gcm_crypt(ctx->key.rkey_enc, dst, src, iv,
-					       walk->nbytes, ghash,
-					       ctx->ghash_table,
-					       (const u8 *)&lengths);
+					       walk->nbytes - tail, ghash,
+					       ctx->ghash_table, l);
 
-			kernel_neon_end();
-
-			return skcipher_walk_done(walk, 0);
-		}
-
-		sm4_ce_pmull_gcm_crypt(ctx->key.rkey_enc, dst, src, iv,
-				       walk->nbytes - tail, ghash,
-				       ctx->ghash_table, NULL);
-
-		kernel_neon_end();
-
-		err = skcipher_walk_done(walk, tail);
-
-		kernel_neon_begin();
+			err = skcipher_walk_done(walk, tail);
+		} while (walk->nbytes);
 	}
-
-	sm4_ce_pmull_gcm_crypt(ctx->key.rkey_enc, NULL, NULL, iv,
-			       walk->nbytes, ghash, ctx->ghash_table,
-			       (const u8 *)&lengths);
-
-	kernel_neon_end();
-
 	return err;
 }
 
diff --git a/arch/arm64/crypto/sm4-ce-glue.c b/arch/arm64/crypto/sm4-ce-glue.c
index 43741bed874e..5569cece5a0b 100644
--- a/arch/arm64/crypto/sm4-ce-glue.c
+++ b/arch/arm64/crypto/sm4-ce-glue.c
@@ -8,19 +8,18 @@
  * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
  */
 
-#include <linux/module.h>
-#include <linux/crypto.h>
-#include <linux/kernel.h>
-#include <linux/cpufeature.h>
-#include <asm/neon.h>
 #include <asm/simd.h>
 #include <crypto/b128ops.h>
-#include <crypto/internal/simd.h>
-#include <crypto/internal/skcipher.h>
 #include <crypto/internal/hash.h>
+#include <crypto/internal/skcipher.h>
 #include <crypto/scatterwalk.h>
-#include <crypto/xts.h>
 #include <crypto/sm4.h>
+#include <crypto/utils.h>
+#include <crypto/xts.h>
+#include <linux/cpufeature.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
 
 #define BYTES2BLKS(nbytes)	((nbytes) >> 4)
 
@@ -64,7 +63,6 @@ struct sm4_mac_tfm_ctx {
 };
 
 struct sm4_mac_desc_ctx {
-	unsigned int len;
 	u8 digest[SM4_BLOCK_SIZE];
 };
 
@@ -76,10 +74,9 @@ static int sm4_setkey(struct crypto_skcipher *tfm, const u8 *key,
 	if (key_len != SM4_KEY_SIZE)
 		return -EINVAL;
 
-	kernel_neon_begin();
-	sm4_ce_expand_key(key, ctx->rkey_enc, ctx->rkey_dec,
-			  crypto_sm4_fk, crypto_sm4_ck);
-	kernel_neon_end();
+	scoped_ksimd()
+		sm4_ce_expand_key(key, ctx->rkey_enc, ctx->rkey_dec,
+				  crypto_sm4_fk, crypto_sm4_ck);
 	return 0;
 }
 
@@ -96,12 +93,12 @@ static int sm4_xts_setkey(struct crypto_skcipher *tfm, const u8 *key,
 	if (ret)
 		return ret;
 
-	kernel_neon_begin();
-	sm4_ce_expand_key(key, ctx->key1.rkey_enc,
-			  ctx->key1.rkey_dec, crypto_sm4_fk, crypto_sm4_ck);
-	sm4_ce_expand_key(&key[SM4_KEY_SIZE], ctx->key2.rkey_enc,
-			  ctx->key2.rkey_dec, crypto_sm4_fk, crypto_sm4_ck);
-	kernel_neon_end();
+	scoped_ksimd() {
+		sm4_ce_expand_key(key, ctx->key1.rkey_enc,
+				ctx->key1.rkey_dec, crypto_sm4_fk, crypto_sm4_ck);
+		sm4_ce_expand_key(&key[SM4_KEY_SIZE], ctx->key2.rkey_enc,
+				ctx->key2.rkey_dec, crypto_sm4_fk, crypto_sm4_ck);
+	}
 
 	return 0;
 }
@@ -119,16 +116,14 @@ static int sm4_ecb_do_crypt(struct skcipher_request *req, const u32 *rkey)
 		u8 *dst = walk.dst.virt.addr;
 		unsigned int nblks;
 
-		kernel_neon_begin();
-
-		nblks = BYTES2BLKS(nbytes);
-		if (nblks) {
-			sm4_ce_crypt(rkey, dst, src, nblks);
-			nbytes -= nblks * SM4_BLOCK_SIZE;
+		scoped_ksimd() {
+			nblks = BYTES2BLKS(nbytes);
+			if (nblks) {
+				sm4_ce_crypt(rkey, dst, src, nblks);
+				nbytes -= nblks * SM4_BLOCK_SIZE;
+			}
 		}
 
-		kernel_neon_end();
-
 		err = skcipher_walk_done(&walk, nbytes);
 	}
 
@@ -169,16 +164,14 @@ static int sm4_cbc_crypt(struct skcipher_request *req,
 
 		nblocks = nbytes / SM4_BLOCK_SIZE;
 		if (nblocks) {
-			kernel_neon_begin();
-
-			if (encrypt)
-				sm4_ce_cbc_enc(ctx->rkey_enc, dst, src,
-					       walk.iv, nblocks);
-			else
-				sm4_ce_cbc_dec(ctx->rkey_dec, dst, src,
-					       walk.iv, nblocks);
-
-			kernel_neon_end();
+			scoped_ksimd() {
+				if (encrypt)
+					sm4_ce_cbc_enc(ctx->rkey_enc, dst, src,
+						       walk.iv, nblocks);
+				else
+					sm4_ce_cbc_dec(ctx->rkey_dec, dst, src,
+						       walk.iv, nblocks);
+			}
 		}
 
 		err = skcipher_walk_done(&walk, nbytes % SM4_BLOCK_SIZE);
@@ -251,16 +244,14 @@ static int sm4_cbc_cts_crypt(struct skcipher_request *req, bool encrypt)
 	if (err)
 		return err;
 
-	kernel_neon_begin();
-
-	if (encrypt)
-		sm4_ce_cbc_cts_enc(ctx->rkey_enc, walk.dst.virt.addr,
-				   walk.src.virt.addr, walk.iv, walk.nbytes);
-	else
-		sm4_ce_cbc_cts_dec(ctx->rkey_dec, walk.dst.virt.addr,
-				   walk.src.virt.addr, walk.iv, walk.nbytes);
-
-	kernel_neon_end();
+	scoped_ksimd() {
+		if (encrypt)
+			sm4_ce_cbc_cts_enc(ctx->rkey_enc, walk.dst.virt.addr,
+					   walk.src.virt.addr, walk.iv, walk.nbytes);
+		else
+			sm4_ce_cbc_cts_dec(ctx->rkey_dec, walk.dst.virt.addr,
+					   walk.src.virt.addr, walk.iv, walk.nbytes);
+	}
 
 	return skcipher_walk_done(&walk, 0);
 }
@@ -290,28 +281,26 @@ static int sm4_ctr_crypt(struct skcipher_request *req)
 		u8 *dst = walk.dst.virt.addr;
 		unsigned int nblks;
 
-		kernel_neon_begin();
-
-		nblks = BYTES2BLKS(nbytes);
-		if (nblks) {
-			sm4_ce_ctr_enc(ctx->rkey_enc, dst, src, walk.iv, nblks);
-			dst += nblks * SM4_BLOCK_SIZE;
-			src += nblks * SM4_BLOCK_SIZE;
-			nbytes -= nblks * SM4_BLOCK_SIZE;
+		scoped_ksimd() {
+			nblks = BYTES2BLKS(nbytes);
+			if (nblks) {
+				sm4_ce_ctr_enc(ctx->rkey_enc, dst, src, walk.iv, nblks);
+				dst += nblks * SM4_BLOCK_SIZE;
+				src += nblks * SM4_BLOCK_SIZE;
+				nbytes -= nblks * SM4_BLOCK_SIZE;
+			}
+
+			/* tail */
+			if (walk.nbytes == walk.total && nbytes > 0) {
+				u8 keystream[SM4_BLOCK_SIZE];
+
+				sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
+				crypto_inc(walk.iv, SM4_BLOCK_SIZE);
+				crypto_xor_cpy(dst, src, keystream, nbytes);
+				nbytes = 0;
+			}
 		}
 
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_inc(walk.iv, SM4_BLOCK_SIZE);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		kernel_neon_end();
-
 		err = skcipher_walk_done(&walk, nbytes);
 	}
 
@@ -361,18 +350,16 @@ static int sm4_xts_crypt(struct skcipher_request *req, bool encrypt)
 		if (nbytes < walk.total)
 			nbytes &= ~(SM4_BLOCK_SIZE - 1);
 
-		kernel_neon_begin();
-
-		if (encrypt)
-			sm4_ce_xts_enc(ctx->key1.rkey_enc, walk.dst.virt.addr,
-				       walk.src.virt.addr, walk.iv, nbytes,
-				       rkey2_enc);
-		else
-			sm4_ce_xts_dec(ctx->key1.rkey_dec, walk.dst.virt.addr,
-				       walk.src.virt.addr, walk.iv, nbytes,
-				       rkey2_enc);
-
-		kernel_neon_end();
+		scoped_ksimd() {
+			if (encrypt)
+				sm4_ce_xts_enc(ctx->key1.rkey_enc, walk.dst.virt.addr,
+						walk.src.virt.addr, walk.iv, nbytes,
+						rkey2_enc);
+			else
+				sm4_ce_xts_dec(ctx->key1.rkey_dec, walk.dst.virt.addr,
+						walk.src.virt.addr, walk.iv, nbytes,
+						rkey2_enc);
+		}
 
 		rkey2_enc = NULL;
 
@@ -397,18 +384,16 @@ static int sm4_xts_crypt(struct skcipher_request *req, bool encrypt)
 	if (err)
 		return err;
 
-	kernel_neon_begin();
-
-	if (encrypt)
-		sm4_ce_xts_enc(ctx->key1.rkey_enc, walk.dst.virt.addr,
-			       walk.src.virt.addr, walk.iv, walk.nbytes,
-			       rkey2_enc);
-	else
-		sm4_ce_xts_dec(ctx->key1.rkey_dec, walk.dst.virt.addr,
-			       walk.src.virt.addr, walk.iv, walk.nbytes,
-			       rkey2_enc);
-
-	kernel_neon_end();
+	scoped_ksimd() {
+		if (encrypt)
+			sm4_ce_xts_enc(ctx->key1.rkey_enc, walk.dst.virt.addr,
+					walk.src.virt.addr, walk.iv, walk.nbytes,
+					rkey2_enc);
+		else
+			sm4_ce_xts_dec(ctx->key1.rkey_dec, walk.dst.virt.addr,
+					walk.src.virt.addr, walk.iv, walk.nbytes,
+					rkey2_enc);
+	}
 
 	return skcipher_walk_done(&walk, 0);
 }
@@ -512,11 +497,9 @@ static int sm4_cbcmac_setkey(struct crypto_shash *tfm, const u8 *key,
 	if (key_len != SM4_KEY_SIZE)
 		return -EINVAL;
 
-	kernel_neon_begin();
-	sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
-			  crypto_sm4_fk, crypto_sm4_ck);
-	kernel_neon_end();
-
+	scoped_ksimd()
+		sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
+				crypto_sm4_fk, crypto_sm4_ck);
 	return 0;
 }
 
@@ -532,15 +515,13 @@ static int sm4_cmac_setkey(struct crypto_shash *tfm, const u8 *key,
 
 	memset(consts, 0, SM4_BLOCK_SIZE);
 
-	kernel_neon_begin();
-
-	sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
-			  crypto_sm4_fk, crypto_sm4_ck);
+	scoped_ksimd() {
+		sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
+				crypto_sm4_fk, crypto_sm4_ck);
 
-	/* encrypt the zero block */
-	sm4_ce_crypt_block(ctx->key.rkey_enc, (u8 *)consts, (const u8 *)consts);
-
-	kernel_neon_end();
+		/* encrypt the zero block */
+		sm4_ce_crypt_block(ctx->key.rkey_enc, (u8 *)consts, (const u8 *)consts);
+	}
 
 	/* gf(2^128) multiply zero-ciphertext with u and u^2 */
 	a = be64_to_cpu(consts[0].a);
@@ -570,18 +551,16 @@ static int sm4_xcbc_setkey(struct crypto_shash *tfm, const u8 *key,
 	if (key_len != SM4_KEY_SIZE)
 		return -EINVAL;
 
-	kernel_neon_begin();
+	scoped_ksimd() {
+		sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
+				crypto_sm4_fk, crypto_sm4_ck);
 
-	sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
-			  crypto_sm4_fk, crypto_sm4_ck);
+		sm4_ce_crypt_block(ctx->key.rkey_enc, key2, ks[0]);
+		sm4_ce_crypt(ctx->key.rkey_enc, ctx->consts, ks[1], 2);
 
-	sm4_ce_crypt_block(ctx->key.rkey_enc, key2, ks[0]);
-	sm4_ce_crypt(ctx->key.rkey_enc, ctx->consts, ks[1], 2);
-
-	sm4_ce_expand_key(key2, ctx->key.rkey_enc, ctx->key.rkey_dec,
-			  crypto_sm4_fk, crypto_sm4_ck);
-
-	kernel_neon_end();
+		sm4_ce_expand_key(key2, ctx->key.rkey_enc, ctx->key.rkey_dec,
+				crypto_sm4_fk, crypto_sm4_ck);
+	}
 
 	return 0;
 }
@@ -591,8 +570,6 @@ static int sm4_mac_init(struct shash_desc *desc)
 	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
 
 	memset(ctx->digest, 0, SM4_BLOCK_SIZE);
-	ctx->len = 0;
-
 	return 0;
 }
 
@@ -601,87 +578,47 @@ static int sm4_mac_update(struct shash_desc *desc, const u8 *p,
 {
 	struct sm4_mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int l, nblocks;
-
-	if (len == 0)
-		return 0;
-
-	if (ctx->len || ctx->len + len < SM4_BLOCK_SIZE) {
-		l = min(len, SM4_BLOCK_SIZE - ctx->len);
-
-		crypto_xor(ctx->digest + ctx->len, p, l);
-		ctx->len += l;
-		len -= l;
-		p += l;
-	}
+	unsigned int nblocks = len / SM4_BLOCK_SIZE;
 
-	if (len && (ctx->len % SM4_BLOCK_SIZE) == 0) {
-		kernel_neon_begin();
-
-		if (len < SM4_BLOCK_SIZE && ctx->len == SM4_BLOCK_SIZE) {
-			sm4_ce_crypt_block(tctx->key.rkey_enc,
-					   ctx->digest, ctx->digest);
-			ctx->len = 0;
-		} else {
-			nblocks = len / SM4_BLOCK_SIZE;
-			len %= SM4_BLOCK_SIZE;
-
-			sm4_ce_mac_update(tctx->key.rkey_enc, ctx->digest, p,
-					  nblocks, (ctx->len == SM4_BLOCK_SIZE),
-					  (len != 0));
-
-			p += nblocks * SM4_BLOCK_SIZE;
-
-			if (len == 0)
-				ctx->len = SM4_BLOCK_SIZE;
-		}
-
-		kernel_neon_end();
-
-		if (len) {
-			crypto_xor(ctx->digest, p, len);
-			ctx->len = len;
-		}
-	}
-
-	return 0;
+	len %= SM4_BLOCK_SIZE;
+	scoped_ksimd()
+		sm4_ce_mac_update(tctx->key.rkey_enc, ctx->digest, p,
+				nblocks, false, true);
+	return len;
 }
 
-static int sm4_cmac_final(struct shash_desc *desc, u8 *out)
+static int sm4_cmac_finup(struct shash_desc *desc, const u8 *src,
+			  unsigned int len, u8 *out)
 {
 	struct sm4_mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
 	const u8 *consts = tctx->consts;
 
-	if (ctx->len != SM4_BLOCK_SIZE) {
-		ctx->digest[ctx->len] ^= 0x80;
+	crypto_xor(ctx->digest, src, len);
+	if (len != SM4_BLOCK_SIZE) {
+		ctx->digest[len] ^= 0x80;
 		consts += SM4_BLOCK_SIZE;
 	}
-
-	kernel_neon_begin();
-	sm4_ce_mac_update(tctx->key.rkey_enc, ctx->digest, consts, 1,
-			  false, true);
-	kernel_neon_end();
-
+	scoped_ksimd()
+		sm4_ce_mac_update(tctx->key.rkey_enc, ctx->digest, consts, 1,
+				  false, true);
 	memcpy(out, ctx->digest, SM4_BLOCK_SIZE);
-
 	return 0;
 }
 
-static int sm4_cbcmac_final(struct shash_desc *desc, u8 *out)
+static int sm4_cbcmac_finup(struct shash_desc *desc, const u8 *src,
+			    unsigned int len, u8 *out)
 {
 	struct sm4_mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
 	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	if (ctx->len) {
-		kernel_neon_begin();
-		sm4_ce_crypt_block(tctx->key.rkey_enc, ctx->digest,
-				   ctx->digest);
-		kernel_neon_end();
+	if (len) {
+		crypto_xor(ctx->digest, src, len);
+		scoped_ksimd()
+			sm4_ce_crypt_block(tctx->key.rkey_enc, ctx->digest,
+					   ctx->digest);
 	}
-
 	memcpy(out, ctx->digest, SM4_BLOCK_SIZE);
-
 	return 0;
 }
 
@@ -691,6 +628,8 @@ static struct shash_alg sm4_mac_algs[] = {
 			.cra_name		= "cmac(sm4)",
 			.cra_driver_name	= "cmac-sm4-ce",
 			.cra_priority		= 400,
+			.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+						  CRYPTO_AHASH_ALG_FINAL_NONZERO,
 			.cra_blocksize		= SM4_BLOCK_SIZE,
 			.cra_ctxsize		= sizeof(struct sm4_mac_tfm_ctx)
 							+ SM4_BLOCK_SIZE * 2,
@@ -699,7 +638,7 @@ static struct shash_alg sm4_mac_algs[] = {
 		.digestsize	= SM4_BLOCK_SIZE,
 		.init		= sm4_mac_init,
 		.update		= sm4_mac_update,
-		.final		= sm4_cmac_final,
+		.finup		= sm4_cmac_finup,
 		.setkey		= sm4_cmac_setkey,
 		.descsize	= sizeof(struct sm4_mac_desc_ctx),
 	}, {
@@ -707,6 +646,8 @@ static struct shash_alg sm4_mac_algs[] = {
 			.cra_name		= "xcbc(sm4)",
 			.cra_driver_name	= "xcbc-sm4-ce",
 			.cra_priority		= 400,
+			.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY |
+						  CRYPTO_AHASH_ALG_FINAL_NONZERO,
 			.cra_blocksize		= SM4_BLOCK_SIZE,
 			.cra_ctxsize		= sizeof(struct sm4_mac_tfm_ctx)
 							+ SM4_BLOCK_SIZE * 2,
@@ -715,7 +656,7 @@ static struct shash_alg sm4_mac_algs[] = {
 		.digestsize	= SM4_BLOCK_SIZE,
 		.init		= sm4_mac_init,
 		.update		= sm4_mac_update,
-		.final		= sm4_cmac_final,
+		.finup		= sm4_cmac_finup,
 		.setkey		= sm4_xcbc_setkey,
 		.descsize	= sizeof(struct sm4_mac_desc_ctx),
 	}, {
@@ -723,14 +664,15 @@ static struct shash_alg sm4_mac_algs[] = {
 			.cra_name		= "cbcmac(sm4)",
 			.cra_driver_name	= "cbcmac-sm4-ce",
 			.cra_priority		= 400,
-			.cra_blocksize		= 1,
+			.cra_flags		= CRYPTO_AHASH_ALG_BLOCK_ONLY,
+			.cra_blocksize		= SM4_BLOCK_SIZE,
 			.cra_ctxsize		= sizeof(struct sm4_mac_tfm_ctx),
 			.cra_module		= THIS_MODULE,
 		},
 		.digestsize	= SM4_BLOCK_SIZE,
 		.init		= sm4_mac_init,
 		.update		= sm4_mac_update,
-		.final		= sm4_cbcmac_final,
+		.finup		= sm4_cbcmac_finup,
 		.setkey		= sm4_cbcmac_setkey,
 		.descsize	= sizeof(struct sm4_mac_desc_ctx),
 	}
diff --git a/arch/arm64/crypto/sm4-neon-glue.c b/arch/arm64/crypto/sm4-neon-glue.c
index e3500aca2d18..e944c2a2efb0 100644
--- a/arch/arm64/crypto/sm4-neon-glue.c
+++ b/arch/arm64/crypto/sm4-neon-glue.c
@@ -48,11 +48,8 @@ static int sm4_ecb_do_crypt(struct skcipher_request *req, const u32 *rkey)
 
 		nblocks = nbytes / SM4_BLOCK_SIZE;
 		if (nblocks) {
-			kernel_neon_begin();
-
-			sm4_neon_crypt(rkey, dst, src, nblocks);
-
-			kernel_neon_end();
+			scoped_ksimd()
+				sm4_neon_crypt(rkey, dst, src, nblocks);
 		}
 
 		err = skcipher_walk_done(&walk, nbytes % SM4_BLOCK_SIZE);
@@ -126,12 +123,9 @@ static int sm4_cbc_decrypt(struct skcipher_request *req)
 
 		nblocks = nbytes / SM4_BLOCK_SIZE;
 		if (nblocks) {
-			kernel_neon_begin();
-
-			sm4_neon_cbc_dec(ctx->rkey_dec, dst, src,
-					 walk.iv, nblocks);
-
-			kernel_neon_end();
+			scoped_ksimd()
+				sm4_neon_cbc_dec(ctx->rkey_dec, dst, src,
+						 walk.iv, nblocks);
 		}
 
 		err = skcipher_walk_done(&walk, nbytes % SM4_BLOCK_SIZE);
@@ -157,12 +151,9 @@ static int sm4_ctr_crypt(struct skcipher_request *req)
 
 		nblocks = nbytes / SM4_BLOCK_SIZE;
 		if (nblocks) {
-			kernel_neon_begin();
-
-			sm4_neon_ctr_crypt(ctx->rkey_enc, dst, src,
-					   walk.iv, nblocks);
-
-			kernel_neon_end();
+			scoped_ksimd()
+				sm4_neon_ctr_crypt(ctx->rkey_enc, dst, src,
+						   walk.iv, nblocks);
 
 			dst += nblocks * SM4_BLOCK_SIZE;
 			src += nblocks * SM4_BLOCK_SIZE;
diff --git a/arch/arm64/hyperv/hv_core.c b/arch/arm64/hyperv/hv_core.c
index f1ebc025e1df..e33a9e3c366a 100644
--- a/arch/arm64/hyperv/hv_core.c
+++ b/arch/arm64/hyperv/hv_core.c
@@ -11,11 +11,10 @@
 #include <linux/types.h>
 #include <linux/export.h>
 #include <linux/mm.h>
-#include <linux/hyperv.h>
 #include <linux/arm-smccc.h>
 #include <linux/module.h>
 #include <asm-generic/bug.h>
-#include <asm/hyperv-tlfs.h>
+#include <hyperv/hvhdk.h>
 #include <asm/mshyperv.h>
 
 /*
@@ -55,6 +54,23 @@ u64 hv_do_fast_hypercall8(u16 code, u64 input)
 EXPORT_SYMBOL_GPL(hv_do_fast_hypercall8);
 
 /*
+ * hv_do_fast_hypercall16 -- Invoke the specified hypercall
+ * with arguments in registers instead of physical memory.
+ * Avoids the overhead of virt_to_phys for simple hypercalls.
+ */
+u64 hv_do_fast_hypercall16(u16 code, u64 input1, u64 input2)
+{
+	struct arm_smccc_res	res;
+	u64			control;
+
+	control = (u64)code | HV_HYPERCALL_FAST_BIT;
+
+	arm_smccc_1_1_hvc(HV_FUNC_ID, control, input1, input2, &res);
+	return res.a0;
+}
+EXPORT_SYMBOL_GPL(hv_do_fast_hypercall16);
+
+/*
  * Set a single VP register to a 64-bit value.
  */
 void hv_set_vpreg(u32 msr, u64 value)
diff --git a/arch/arm64/hyperv/mshyperv.c b/arch/arm64/hyperv/mshyperv.c
index b1a4de4eee29..4fdc26ade1d7 100644
--- a/arch/arm64/hyperv/mshyperv.c
+++ b/arch/arm64/hyperv/mshyperv.c
@@ -26,6 +26,49 @@ int hv_get_hypervisor_version(union hv_hypervisor_version_info *info)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(hv_get_hypervisor_version);
+
+#ifdef CONFIG_ACPI
+
+static bool __init hyperv_detect_via_acpi(void)
+{
+	if (acpi_disabled)
+		return false;
+	/*
+	 * Hypervisor ID is only available in ACPI v6+, and the
+	 * structure layout was extended in v6 to accommodate that
+	 * new field.
+	 *
+	 * At the very minimum, this check makes sure not to read
+	 * past the FADT structure.
+	 *
+	 * It is also needed to catch running in some unknown
+	 * non-Hyper-V environment that has ACPI 5.x or less.
+	 * In such a case, it can't be Hyper-V.
+	 */
+	if (acpi_gbl_FADT.header.revision < 6)
+		return false;
+	return strncmp((char *)&acpi_gbl_FADT.hypervisor_id, "MsHyperV", 8) == 0;
+}
+
+#else
+
+static bool __init hyperv_detect_via_acpi(void)
+{
+	return false;
+}
+
+#endif
+
+static bool __init hyperv_detect_via_smccc(void)
+{
+	uuid_t hyperv_uuid = UUID_INIT(
+		0x58ba324d, 0x6447, 0x24cd,
+		0x75, 0x6c, 0xef, 0x8e,
+		0x24, 0x70, 0x59, 0x16);
+
+	return arm_smccc_hypervisor_has_uuid(&hyperv_uuid);
+}
 
 static int __init hyperv_init(void)
 {
@@ -35,13 +78,11 @@ static int __init hyperv_init(void)
 
 	/*
 	 * Allow for a kernel built with CONFIG_HYPERV to be running in
-	 * a non-Hyper-V environment, including on DT instead of ACPI.
+	 * a non-Hyper-V environment.
+	 *
 	 * In such cases, do nothing and return success.
 	 */
-	if (acpi_disabled)
-		return 0;
-
-	if (strncmp((char *)&acpi_gbl_FADT.hypervisor_id, "MsHyperV", 8))
+	if (!hyperv_detect_via_acpi() && !hyperv_detect_via_smccc())
 		return 0;
 
 	/* Setup the guest ID */
@@ -49,18 +90,20 @@ static int __init hyperv_init(void)
 	hv_set_vpreg(HV_REGISTER_GUEST_OS_ID, guest_id);
 
 	/* Get the features and hints from Hyper-V */
-	hv_get_vpreg_128(HV_REGISTER_FEATURES, &result);
+	hv_get_vpreg_128(HV_REGISTER_PRIVILEGES_AND_FEATURES_INFO, &result);
 	ms_hyperv.features = result.as32.a;
 	ms_hyperv.priv_high = result.as32.b;
 	ms_hyperv.misc_features = result.as32.c;
 
-	hv_get_vpreg_128(HV_REGISTER_ENLIGHTENMENTS, &result);
+	hv_get_vpreg_128(HV_REGISTER_FEATURES_INFO, &result);
 	ms_hyperv.hints = result.as32.a;
 
 	pr_info("Hyper-V: privilege flags low 0x%x, high 0x%x, hints 0x%x, misc 0x%x\n",
 		ms_hyperv.features, ms_hyperv.priv_high, ms_hyperv.hints,
 		ms_hyperv.misc_features);
 
+	hv_identify_partition_type();
+
 	ret = hv_common_init();
 	if (ret)
 		return ret;
@@ -72,6 +115,12 @@ static int __init hyperv_init(void)
 		return ret;
 	}
 
+	if (ms_hyperv.priv_high & HV_ACCESS_PARTITION_ID)
+		hv_get_partition_id();
+	ms_hyperv.vtl = get_vtl();
+	if (ms_hyperv.vtl > 0) /* non default VTL */
+		pr_info("Linux runs in Hyper-V Virtual Trust Level %d\n", ms_hyperv.vtl);
+
 	ms_hyperv_late_init();
 
 	hyperv_initialized = true;
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index 4e350df9a02d..d2ff8f6c3231 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -8,6 +8,7 @@ syscall-y += unistd_32.h
 syscall-y += unistd_compat_32.h
 
 generic-y += early_ioremap.h
+generic-y += fprobe.h
 generic-y += mcs_spinlock.h
 generic-y += mmzone.h
 generic-y += qrwlock.h
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index a407f9cd549e..c07a58b96329 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -150,7 +150,7 @@ acpi_set_mailbox_entry(int cpu, struct acpi_madt_generic_interrupt *processor)
 {}
 #endif
 
-static inline const char *acpi_get_enable_method(int cpu)
+static __always_inline const char *acpi_get_enable_method(int cpu)
 {
 	if (acpi_psci_present())
 		return "psci";
diff --git a/arch/arm64/include/asm/alternative-macros.h b/arch/arm64/include/asm/alternative-macros.h
index c8c77f9e36d6..862416624852 100644
--- a/arch/arm64/include/asm/alternative-macros.h
+++ b/arch/arm64/include/asm/alternative-macros.h
@@ -19,7 +19,7 @@
 #error "cpucaps have overflown ARM64_CB_BIT"
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/stringify.h>
 
@@ -207,7 +207,7 @@ alternative_endif
 #define _ALTERNATIVE_CFG(insn1, insn2, cap, cfg, ...)	\
 	alternative_insn insn1, insn2, cap, IS_ENABLED(cfg)
 
-#endif  /*  __ASSEMBLY__  */
+#endif  /*  __ASSEMBLER__  */
 
 /*
  * Usage: asm(ALTERNATIVE(oldinstr, newinstr, cpucap));
@@ -219,7 +219,7 @@ alternative_endif
 #define ALTERNATIVE(oldinstr, newinstr, ...)   \
 	_ALTERNATIVE_CFG(oldinstr, newinstr, __VA_ARGS__, 1)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 
@@ -263,6 +263,6 @@ l_yes:
 	return true;
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_ALTERNATIVE_MACROS_H */
diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h
index 00d97b8a757f..621aa8550174 100644
--- a/arch/arm64/include/asm/alternative.h
+++ b/arch/arm64/include/asm/alternative.h
@@ -4,7 +4,7 @@
 
 #include <asm/alternative-macros.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/init.h>
 #include <linux/types.h>
@@ -26,13 +26,16 @@ void __init apply_alternatives_all(void);
 bool alternative_is_applied(u16 cpucap);
 
 #ifdef CONFIG_MODULES
-void apply_alternatives_module(void *start, size_t length);
+int apply_alternatives_module(void *start, size_t length);
 #else
-static inline void apply_alternatives_module(void *start, size_t length) { }
+static inline int apply_alternatives_module(void *start, size_t length)
+{
+	return 0;
+}
 #endif
 
 void alt_cb_patch_nops(struct alt_instr *alt, __le32 *origptr,
 		       __le32 *updptr, int nr_inst);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ASM_ALTERNATIVE_H */
diff --git a/arch/arm64/include/asm/apple_m1_pmu.h b/arch/arm64/include/asm/apple_m1_pmu.h
index 99483b19b99f..02e05d05851f 100644
--- a/arch/arm64/include/asm/apple_m1_pmu.h
+++ b/arch/arm64/include/asm/apple_m1_pmu.h
@@ -37,6 +37,7 @@
 #define PMCR0_PMI_ENABLE_8_9	GENMASK(45, 44)
 
 #define SYS_IMP_APL_PMCR1_EL1	sys_reg(3, 1, 15, 1, 0)
+#define SYS_IMP_APL_PMCR1_EL12	sys_reg(3, 1, 15, 7, 2)
 #define PMCR1_COUNT_A64_EL0_0_7	GENMASK(15, 8)
 #define PMCR1_COUNT_A64_EL1_0_7	GENMASK(23, 16)
 #define PMCR1_COUNT_A64_EL0_8_9	GENMASK(41, 40)
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index 9e96f024b2f1..d20b03931a8d 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -9,7 +9,7 @@
 
 #include <asm/sysreg.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/irqchip/arm-gic-common.h>
 #include <linux/stringify.h>
@@ -188,5 +188,5 @@ static inline bool gic_has_relaxed_pmr_sync(void)
 	return cpus_have_cap(ARM64_HAS_GIC_PRIO_RELAXED_SYNC);
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ASM_ARCH_GICV3_H */
diff --git a/arch/arm64/include/asm/asm-bug.h b/arch/arm64/include/asm/asm-bug.h
index 6e73809f6492..a5f13801b784 100644
--- a/arch/arm64/include/asm/asm-bug.h
+++ b/arch/arm64/include/asm/asm-bug.h
@@ -21,16 +21,21 @@
 #endif
 
 #ifdef CONFIG_GENERIC_BUG
-
-#define __BUG_ENTRY(flags) 				\
+#define __BUG_ENTRY_START				\
 		.pushsection __bug_table,"aw";		\
 		.align 2;				\
 	14470:	.long 14471f - .;			\
-_BUGVERBOSE_LOCATION(__FILE__, __LINE__)		\
-		.short flags; 				\
+
+#define __BUG_ENTRY_END					\
 		.align 2;				\
 		.popsection;				\
 	14471:
+
+#define __BUG_ENTRY(flags)				\
+		__BUG_ENTRY_START			\
+_BUGVERBOSE_LOCATION(__FILE__, __LINE__)		\
+		.short flags;				\
+		__BUG_ENTRY_END
 #else
 #define __BUG_ENTRY(flags)
 #endif
@@ -41,4 +46,24 @@ _BUGVERBOSE_LOCATION(__FILE__, __LINE__)		\
 
 #define ASM_BUG()	ASM_BUG_FLAGS(0)
 
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define __BUG_LOCATION_STRING(file, line)		\
+		".long " file "- .;"			\
+		".short " line ";"
+#else
+#define __BUG_LOCATION_STRING(file, line)
+#endif
+
+#define __BUG_ENTRY_STRING(file, line, flags)		\
+		__stringify(__BUG_ENTRY_START)		\
+		__BUG_LOCATION_STRING(file, line)	\
+		".short " flags ";"			\
+		__stringify(__BUG_ENTRY_END)
+
+#define ARCH_WARN_ASM(file, line, flags, size)		\
+	__BUG_ENTRY_STRING(file, line, flags)		\
+	__stringify(brk BUG_BRK_IMM)
+
+#define ARCH_WARN_REACHABLE
+
 #endif /* __ASM_ASM_BUG_H */
diff --git a/arch/arm64/include/asm/asm-extable.h b/arch/arm64/include/asm/asm-extable.h
index b8a5861dc7b7..d67e2fdd1aee 100644
--- a/arch/arm64/include/asm/asm-extable.h
+++ b/arch/arm64/include/asm/asm-extable.h
@@ -9,7 +9,8 @@
 #define EX_TYPE_BPF			1
 #define EX_TYPE_UACCESS_ERR_ZERO	2
 #define EX_TYPE_KACCESS_ERR_ZERO	3
-#define EX_TYPE_LOAD_UNALIGNED_ZEROPAD	4
+#define EX_TYPE_UACCESS_CPY		4
+#define EX_TYPE_LOAD_UNALIGNED_ZEROPAD	5
 
 /* Data fields for EX_TYPE_UACCESS_ERR_ZERO */
 #define EX_DATA_REG_ERR_SHIFT	0
@@ -23,7 +24,10 @@
 #define EX_DATA_REG_ADDR_SHIFT	5
 #define EX_DATA_REG_ADDR	GENMASK(9, 5)
 
-#ifdef __ASSEMBLY__
+/* Data fields for EX_TYPE_UACCESS_CPY */
+#define EX_DATA_UACCESS_WRITE	BIT(0)
+
+#ifdef __ASSEMBLER__
 
 #define __ASM_EXTABLE_RAW(insn, fixup, type, data)	\
 	.pushsection	__ex_table, "a";		\
@@ -69,7 +73,11 @@
 	.endif
 	.endm
 
-#else /* __ASSEMBLY__ */
+	.macro		_asm_extable_uaccess_cpy, insn, fixup, uaccess_is_write
+	__ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_UACCESS_CPY, \uaccess_is_write)
+	.endm
+
+#else /* __ASSEMBLER__ */
 
 #include <linux/stringify.h>
 
@@ -124,6 +132,6 @@
 			    EX_DATA_REG(ADDR, addr)				\
 			  ")")
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_ASM_EXTABLE_H */
diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h
index 5b6efe8abeeb..9148f5a31968 100644
--- a/arch/arm64/include/asm/asm-uaccess.h
+++ b/arch/arm64/include/asm/asm-uaccess.h
@@ -61,6 +61,10 @@ alternative_else_nop_endif
 9999:	x;					\
 	_asm_extable_uaccess	9999b, l
 
+#define USER_CPY(l, uaccess_is_write, x...)	\
+9999:	x;					\
+	_asm_extable_uaccess_cpy 9999b, l, uaccess_is_write
+
 /*
  * Generate the assembly for LDTR/STTR with exception table entries.
  * This is complicated as there is no post-increment or pair versions of the
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 3d8d534a7a77..f0ca7196f6fa 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -5,7 +5,7 @@
  * Copyright (C) 1996-2000 Russell King
  * Copyright (C) 2012 ARM Ltd.
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #error "Only include this from assembly code"
 #endif
 
@@ -41,6 +41,11 @@
 /*
  * Save/restore interrupts.
  */
+	.macro save_and_disable_daif, flags
+	mrs	\flags, daif
+	msr	daifset, #0xf
+	.endm
+
 	.macro	save_and_disable_irq, flags
 	mrs	\flags, daif
 	msr	daifset, #3
@@ -53,7 +58,7 @@
 	.macro	disable_step_tsk, flgs, tmp
 	tbz	\flgs, #TIF_SINGLESTEP, 9990f
 	mrs	\tmp, mdscr_el1
-	bic	\tmp, \tmp, #DBG_MDSCR_SS
+	bic	\tmp, \tmp, #MDSCR_EL1_SS
 	msr	mdscr_el1, \tmp
 	isb	// Take effect before a subsequent clear of DAIF.D
 9990:
@@ -63,7 +68,7 @@
 	.macro	enable_step_tsk, flgs, tmp
 	tbz	\flgs, #TIF_SINGLESTEP, 9990f
 	mrs	\tmp, mdscr_el1
-	orr	\tmp, \tmp, #DBG_MDSCR_SS
+	orr	\tmp, \tmp, #MDSCR_EL1_SS
 	msr	mdscr_el1, \tmp
 9990:
 	.endm
@@ -320,14 +325,14 @@ alternative_cb_end
  * tcr_set_t0sz - update TCR.T0SZ so that we can load the ID map
  */
 	.macro	tcr_set_t0sz, valreg, t0sz
-	bfi	\valreg, \t0sz, #TCR_T0SZ_OFFSET, #TCR_TxSZ_WIDTH
+	bfi	\valreg, \t0sz, #TCR_EL1_T0SZ_SHIFT, #TCR_EL1_T0SZ_WIDTH
 	.endm
 
 /*
  * tcr_set_t1sz - update TCR.T1SZ
  */
 	.macro	tcr_set_t1sz, valreg, t1sz
-	bfi	\valreg, \t1sz, #TCR_T1SZ_OFFSET, #TCR_TxSZ_WIDTH
+	bfi	\valreg, \t1sz, #TCR_EL1_T1SZ_SHIFT, #TCR_EL1_T1SZ_WIDTH
 	.endm
 
 /*
@@ -343,6 +348,11 @@ alternative_cb_end
 	// Narrow PARange to fit the PS field in TCR_ELx
 	ubfx	\tmp0, \tmp0, #ID_AA64MMFR0_EL1_PARANGE_SHIFT, #3
 	mov	\tmp1, #ID_AA64MMFR0_EL1_PARANGE_MAX
+#ifdef CONFIG_ARM64_LPA2
+alternative_if_not ARM64_HAS_VA52
+	mov	\tmp1, #ID_AA64MMFR0_EL1_PARANGE_48
+alternative_else_nop_endif
+#endif
 	cmp	\tmp0, \tmp1
 	csel	\tmp0, \tmp1, \tmp0, hi
 	bfi	\tcr, \tmp0, \pos, #3
@@ -361,7 +371,7 @@ alternative_endif
  * [start, end) with dcache line size explicitly provided.
  *
  * 	op:		operation passed to dc instruction
- * 	domain:		domain used in dsb instruciton
+ * 	domain:		domain used in dsb instruction
  * 	start:          starting virtual address of the region
  * 	end:            end virtual address of the region
  *	linesz:		dcache line size
@@ -402,7 +412,7 @@ alternative_endif
  * [start, end)
  *
  * 	op:		operation passed to dc instruction
- * 	domain:		domain used in dsb instruciton
+ * 	domain:		domain used in dsb instruction
  * 	start:          starting virtual address of the region
  * 	end:            end virtual address of the region
  * 	fixup:		optional label to branch to on user fault
@@ -579,7 +589,7 @@ alternative_endif
 	.macro	offset_ttbr1, ttbr, tmp
 #if defined(CONFIG_ARM64_VA_BITS_52) && !defined(CONFIG_ARM64_LPA2)
 	mrs	\tmp, tcr_el1
-	and	\tmp, \tmp, #TCR_T1SZ_MASK
+	and	\tmp, \tmp, #TCR_EL1_T1SZ_MASK
 	cmp	\tmp, #TCR_T1SZ(VA_BITS_MIN)
 	orr	\tmp, \ttbr, #TTBR1_BADDR_4852_OFFSET
 	csel	\ttbr, \tmp, \ttbr, eq
diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h
index 87f568a94e55..afad1849c4cf 100644
--- a/arch/arm64/include/asm/atomic_lse.h
+++ b/arch/arm64/include/asm/atomic_lse.h
@@ -103,17 +103,17 @@ static __always_inline void __lse_atomic_and(int i, atomic_t *v)
 	return __lse_atomic_andnot(~i, v);
 }
 
-#define ATOMIC_FETCH_OP_AND(name, mb, cl...)				\
+#define ATOMIC_FETCH_OP_AND(name)					\
 static __always_inline int						\
 __lse_atomic_fetch_and##name(int i, atomic_t *v)			\
 {									\
 	return __lse_atomic_fetch_andnot##name(~i, v);			\
 }
 
-ATOMIC_FETCH_OP_AND(_relaxed,   )
-ATOMIC_FETCH_OP_AND(_acquire,  a, "memory")
-ATOMIC_FETCH_OP_AND(_release,  l, "memory")
-ATOMIC_FETCH_OP_AND(        , al, "memory")
+ATOMIC_FETCH_OP_AND(_relaxed)
+ATOMIC_FETCH_OP_AND(_acquire)
+ATOMIC_FETCH_OP_AND(_release)
+ATOMIC_FETCH_OP_AND(        )
 
 #undef ATOMIC_FETCH_OP_AND
 
@@ -210,17 +210,17 @@ static __always_inline void __lse_atomic64_and(s64 i, atomic64_t *v)
 	return __lse_atomic64_andnot(~i, v);
 }
 
-#define ATOMIC64_FETCH_OP_AND(name, mb, cl...)				\
+#define ATOMIC64_FETCH_OP_AND(name)					\
 static __always_inline long						\
 __lse_atomic64_fetch_and##name(s64 i, atomic64_t *v)			\
 {									\
 	return __lse_atomic64_fetch_andnot##name(~i, v);		\
 }
 
-ATOMIC64_FETCH_OP_AND(_relaxed,   )
-ATOMIC64_FETCH_OP_AND(_acquire,  a, "memory")
-ATOMIC64_FETCH_OP_AND(_release,  l, "memory")
-ATOMIC64_FETCH_OP_AND(        , al, "memory")
+ATOMIC64_FETCH_OP_AND(_relaxed)
+ATOMIC64_FETCH_OP_AND(_acquire)
+ATOMIC64_FETCH_OP_AND(_release)
+ATOMIC64_FETCH_OP_AND(        )
 
 #undef ATOMIC64_FETCH_OP_AND
 
diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h
index 1ca947d5c939..9495c4441a46 100644
--- a/arch/arm64/include/asm/barrier.h
+++ b/arch/arm64/include/asm/barrier.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_BARRIER_H
 #define __ASM_BARRIER_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/kasan-checks.h>
 
@@ -44,6 +44,9 @@
 						 SB_BARRIER_INSN"nop\n",	\
 						 ARM64_HAS_SB))
 
+#define gsb_ack()	asm volatile(GSB_ACK_BARRIER_INSN : : : "memory")
+#define gsb_sys()	asm volatile(GSB_SYS_BARRIER_INSN : : : "memory")
+
 #ifdef CONFIG_ARM64_PSEUDO_NMI
 #define pmr_sync()						\
 	do {							\
@@ -218,6 +221,6 @@ do {									\
 
 #include <asm-generic/barrier.h>
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* __ASM_BARRIER_H */
diff --git a/arch/arm64/include/asm/bug.h b/arch/arm64/include/asm/bug.h
index 28be048db3f6..bceeaec21fb9 100644
--- a/arch/arm64/include/asm/bug.h
+++ b/arch/arm64/include/asm/bug.h
@@ -19,7 +19,7 @@
 	unreachable();					\
 } while (0)
 
-#define __WARN_FLAGS(flags) __BUG_FLAGS(BUGFLAG_WARNING|(flags))
+#define __WARN_FLAGS(cond_str, flags) __BUG_FLAGS(BUGFLAG_WARNING|(flags))
 
 #define HAVE_ARCH_BUG
 
diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h
index 06a4670bdb0b..dd2c8586a725 100644
--- a/arch/arm64/include/asm/cache.h
+++ b/arch/arm64/include/asm/cache.h
@@ -35,7 +35,7 @@
 #define ARCH_DMA_MINALIGN	(128)
 #define ARCH_KMALLOC_MINALIGN	(8)
 
-#ifndef __ASSEMBLY__
+#if !defined(__ASSEMBLER__) && !defined(BUILD_VDSO)
 
 #include <linux/bitops.h>
 #include <linux/kasan-enabled.h>
@@ -87,6 +87,23 @@ int cache_line_size(void);
 
 #define dma_get_cache_alignment	cache_line_size
 
+/* Compress a u64 MPIDR value into 32 bits. */
+static inline u64 arch_compact_of_hwid(u64 id)
+{
+	u64 aff3 = MPIDR_AFFINITY_LEVEL(id, 3);
+
+	/*
+	 * These bits are expected to be RES0. If not, return a value with
+	 * the upper 32 bits set to force the caller to give up on 32 bit
+	 * cache ids.
+	 */
+	if (FIELD_GET(GENMASK_ULL(63, 40), id))
+		return id;
+
+	return (aff3 << 24) | FIELD_GET(GENMASK_ULL(23, 0), id);
+}
+#define arch_compact_of_hwid	arch_compact_of_hwid
+
 /*
  * Read the effective value of CTR_EL0.
  *
@@ -118,6 +135,6 @@ static inline u32 __attribute_const__ read_cpuid_effective_cachetype(void)
 	return ctr;
 }
 
-#endif	/* __ASSEMBLY__ */
+#endif /* !defined(__ASSEMBLER__) && !defined(BUILD_VDSO) */
 
 #endif
diff --git a/arch/arm64/include/asm/cfi.h b/arch/arm64/include/asm/cfi.h
new file mode 100644
index 000000000000..ab90f0351b7a
--- /dev/null
+++ b/arch/arm64/include/asm/cfi.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARM64_CFI_H
+#define _ASM_ARM64_CFI_H
+
+#define __bpfcall
+
+#endif /* _ASM_ARM64_CFI_H */
diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h
index 81e4157f92b7..71493b760b83 100644
--- a/arch/arm64/include/asm/cpu.h
+++ b/arch/arm64/include/asm/cpu.h
@@ -44,6 +44,7 @@ struct cpuinfo_arm64 {
 	u64		reg_dczid;
 	u64		reg_midr;
 	u64		reg_revidr;
+	u64		reg_aidr;
 	u64		reg_gmid;
 	u64		reg_smidr;
 	u64		reg_mpamidr;
diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
index 201a46efd918..2c8029472ad4 100644
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -5,7 +5,7 @@
 
 #include <asm/cpucap-defs.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 /*
  * Check whether a cpucap is possible at compiletime.
@@ -44,6 +44,10 @@ cpucap_is_possible(const unsigned int cap)
 		return IS_ENABLED(CONFIG_ARM64_TLB_RANGE);
 	case ARM64_HAS_S1POE:
 		return IS_ENABLED(CONFIG_ARM64_POE);
+	case ARM64_HAS_GCS:
+		return IS_ENABLED(CONFIG_ARM64_GCS);
+	case ARM64_HAFT:
+		return IS_ENABLED(CONFIG_ARM64_HAFT);
 	case ARM64_UNMAP_KERNEL_AT_EL0:
 		return IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0);
 	case ARM64_WORKAROUND_843419:
@@ -67,10 +71,12 @@ cpucap_is_possible(const unsigned int cap)
 		 * KVM MPAM support doesn't rely on the host kernel supporting MPAM.
 		*/
 		return true;
+	case ARM64_HAS_PMUV3:
+		return IS_ENABLED(CONFIG_HW_PERF_EVENTS);
 	}
 
 	return true;
 }
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_CPUCAPS_H */
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index b64e49bd9d10..4de51f8d92cb 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -19,7 +19,7 @@
 #define ARM64_SW_FEATURE_OVERRIDE_HVHE		4
 #define ARM64_SW_FEATURE_OVERRIDE_RODATA_OFF	8
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/bug.h>
 #include <linux/jump_label.h>
@@ -199,7 +199,7 @@ extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0;
  *    registers (e.g, SCTLR, TCR etc.) or patching the kernel via
  *    alternatives. The kernel patching is batched and performed at later
  *    point. The actions are always initiated only after the capability
- *    is finalised. This is usally denoted by "enabling" the capability.
+ *    is finalised. This is usually denoted by "enabling" the capability.
  *    The actions are initiated as follows :
  *	a) Action is triggered on all online CPUs, after the capability is
  *	finalised, invoked within the stop_machine() context from
@@ -251,7 +251,7 @@ extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0;
 #define ARM64_CPUCAP_SCOPE_LOCAL_CPU		((u16)BIT(0))
 #define ARM64_CPUCAP_SCOPE_SYSTEM		((u16)BIT(1))
 /*
- * The capabilitiy is detected on the Boot CPU and is used by kernel
+ * The capability is detected on the Boot CPU and is used by kernel
  * during early boot. i.e, the capability should be "detected" and
  * "enabled" as early as possibly on all booting CPUs.
  */
@@ -275,6 +275,14 @@ extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0;
 #define ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU	((u16)BIT(5))
 /* Panic when a conflict is detected */
 #define ARM64_CPUCAP_PANIC_ON_CONFLICT		((u16)BIT(6))
+/*
+ * When paired with SCOPE_LOCAL_CPU, all early CPUs must satisfy the
+ * condition. This is different from SCOPE_SYSTEM where the check is performed
+ * only once at the end of the SMP boot on the sanitised ID registers.
+ * SCOPE_SYSTEM is not suitable for cases where the capability depends on
+ * properties local to a CPU like MIDR_EL1.
+ */
+#define ARM64_CPUCAP_MATCH_ALL_EARLY_CPUS	((u16)BIT(7))
 
 /*
  * CPU errata workarounds that need to be enabled at boot time if one or
@@ -304,6 +312,16 @@ extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0;
 	(ARM64_CPUCAP_SCOPE_LOCAL_CPU		|	\
 	 ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU	|	\
 	 ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU)
+/*
+ * CPU feature detected at boot time and present on all early CPUs. Late CPUs
+ * are permitted to have the feature even if it hasn't been enabled, although
+ * the feature will not be used by Linux in this case. If all early CPUs have
+ * the feature, then every late CPU must have it.
+ */
+#define ARM64_CPUCAP_EARLY_LOCAL_CPU_FEATURE		\
+	 (ARM64_CPUCAP_SCOPE_LOCAL_CPU		|	\
+	  ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU	|	\
+	  ARM64_CPUCAP_MATCH_ALL_EARLY_CPUS)
 
 /*
  * CPU feature detected at boot time, on one or more CPUs. A late CPU
@@ -391,6 +409,11 @@ static inline int cpucap_default_scope(const struct arm64_cpu_capabilities *cap)
 	return cap->type & ARM64_CPUCAP_SCOPE_MASK;
 }
 
+static inline bool cpucap_match_all_early_cpus(const struct arm64_cpu_capabilities *cap)
+{
+	return cap->type & ARM64_CPUCAP_MATCH_ALL_EARLY_CPUS;
+}
+
 /*
  * Generic helper for handling capabilities with multiple (match,enable) pairs
  * of call backs, sharing the same capability bit.
@@ -525,29 +548,6 @@ cpuid_feature_extract_unsigned_field(u64 features, int field)
 	return cpuid_feature_extract_unsigned_field_width(features, field, 4);
 }
 
-/*
- * Fields that identify the version of the Performance Monitors Extension do
- * not follow the standard ID scheme. See ARM DDI 0487E.a page D13-2825,
- * "Alternative ID scheme used for the Performance Monitors Extension version".
- */
-static inline u64 __attribute_const__
-cpuid_feature_cap_perfmon_field(u64 features, int field, u64 cap)
-{
-	u64 val = cpuid_feature_extract_unsigned_field(features, field);
-	u64 mask = GENMASK_ULL(field + 3, field);
-
-	/* Treat IMPLEMENTATION DEFINED functionality as unimplemented */
-	if (val == ID_AA64DFR0_EL1_PMUVer_IMP_DEF)
-		val = 0;
-
-	if (val > cap) {
-		features &= ~mask;
-		features |= (cap << field) & mask;
-	}
-
-	return features;
-}
-
 static inline u64 arm64_ftr_mask(const struct arm64_ftr_bits *ftrp)
 {
 	return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift);
@@ -671,6 +671,7 @@ static inline bool supports_clearbhb(int scope)
 }
 
 const struct cpumask *system_32bit_el0_cpumask(void);
+const struct cpumask *fallback_32bit_el0_cpumask(void);
 DECLARE_STATIC_KEY_FALSE(arm64_mismatched_32bit_el0);
 
 static inline bool system_supports_32bit_el0(void)
@@ -847,14 +848,12 @@ static inline bool system_supports_poe(void)
 
 static inline bool system_supports_gcs(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_GCS) &&
-		alternative_has_cap_unlikely(ARM64_HAS_GCS);
+	return alternative_has_cap_unlikely(ARM64_HAS_GCS);
 }
 
 static inline bool system_supports_haft(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_HAFT) &&
-		cpus_have_final_cap(ARM64_HAFT);
+	return cpus_have_final_cap(ARM64_HAFT);
 }
 
 static __always_inline bool system_supports_mpam(void)
@@ -867,6 +866,18 @@ static __always_inline bool system_supports_mpam_hcr(void)
 	return alternative_has_cap_unlikely(ARM64_MPAM_HCR);
 }
 
+static inline bool system_supports_pmuv3(void)
+{
+	return cpus_have_final_cap(ARM64_HAS_PMUV3);
+}
+
+bool cpu_supports_bbml2_noabort(void);
+
+static inline bool system_supports_bbml2_noabort(void)
+{
+	return alternative_has_cap_unlikely(ARM64_HAS_BBML2_NOABORT);
+}
+
 int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
 bool try_emulate_mrs(struct pt_regs *regs, u32 isn);
 
@@ -1067,6 +1078,6 @@ static inline bool cpu_has_lpa2(void)
 #endif
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 488f8e751349..08860d482e60 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -75,6 +75,7 @@
 #define ARM_CPU_PART_CORTEX_A76		0xD0B
 #define ARM_CPU_PART_NEOVERSE_N1	0xD0C
 #define ARM_CPU_PART_CORTEX_A77		0xD0D
+#define ARM_CPU_PART_CORTEX_A76AE	0xD0E
 #define ARM_CPU_PART_NEOVERSE_V1	0xD40
 #define ARM_CPU_PART_CORTEX_A78		0xD41
 #define ARM_CPU_PART_CORTEX_A78AE	0xD42
@@ -91,9 +92,11 @@
 #define ARM_CPU_PART_NEOVERSE_V2	0xD4F
 #define ARM_CPU_PART_CORTEX_A720	0xD81
 #define ARM_CPU_PART_CORTEX_X4		0xD82
+#define ARM_CPU_PART_NEOVERSE_V3AE	0xD83
 #define ARM_CPU_PART_NEOVERSE_V3	0xD84
 #define ARM_CPU_PART_CORTEX_X925	0xD85
 #define ARM_CPU_PART_CORTEX_A725	0xD87
+#define ARM_CPU_PART_CORTEX_A720AE	0xD89
 #define ARM_CPU_PART_NEOVERSE_N3	0xD8E
 
 #define APM_CPU_PART_XGENE		0x000
@@ -119,16 +122,21 @@
 #define QCOM_CPU_PART_KRYO		0x200
 #define QCOM_CPU_PART_KRYO_2XX_GOLD	0x800
 #define QCOM_CPU_PART_KRYO_2XX_SILVER	0x801
+#define QCOM_CPU_PART_KRYO_3XX_GOLD	0x802
 #define QCOM_CPU_PART_KRYO_3XX_SILVER	0x803
 #define QCOM_CPU_PART_KRYO_4XX_GOLD	0x804
 #define QCOM_CPU_PART_KRYO_4XX_SILVER	0x805
+#define QCOM_CPU_PART_ORYON_X1		0x001
 
 #define NVIDIA_CPU_PART_DENVER		0x003
 #define NVIDIA_CPU_PART_CARMEL		0x004
+#define NVIDIA_CPU_PART_OLYMPUS		0x010
 
 #define FUJITSU_CPU_PART_A64FX		0x001
 
 #define HISI_CPU_PART_TSV110		0xD01
+#define HISI_CPU_PART_HIP09			0xD02
+#define HISI_CPU_PART_HIP12		0xD06
 
 #define APPLE_CPU_PART_M1_ICESTORM	0x022
 #define APPLE_CPU_PART_M1_FIRESTORM	0x023
@@ -158,6 +166,7 @@
 #define MIDR_CORTEX_A76	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76)
 #define MIDR_NEOVERSE_N1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N1)
 #define MIDR_CORTEX_A77	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A77)
+#define MIDR_CORTEX_A76AE	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76AE)
 #define MIDR_NEOVERSE_V1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V1)
 #define MIDR_CORTEX_A78	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78)
 #define MIDR_CORTEX_A78AE	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78AE)
@@ -174,9 +183,11 @@
 #define MIDR_NEOVERSE_V2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V2)
 #define MIDR_CORTEX_A720 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A720)
 #define MIDR_CORTEX_X4 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X4)
+#define MIDR_NEOVERSE_V3AE	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V3AE)
 #define MIDR_NEOVERSE_V3 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V3)
 #define MIDR_CORTEX_X925 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X925)
 #define MIDR_CORTEX_A725 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A725)
+#define MIDR_CORTEX_A720AE MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A720AE)
 #define MIDR_NEOVERSE_N3 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N3)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
@@ -195,13 +206,28 @@
 #define MIDR_QCOM_KRYO MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO)
 #define MIDR_QCOM_KRYO_2XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_2XX_GOLD)
 #define MIDR_QCOM_KRYO_2XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_2XX_SILVER)
+#define MIDR_QCOM_KRYO_3XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_3XX_GOLD)
 #define MIDR_QCOM_KRYO_3XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_3XX_SILVER)
 #define MIDR_QCOM_KRYO_4XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_GOLD)
 #define MIDR_QCOM_KRYO_4XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_SILVER)
+#define MIDR_QCOM_ORYON_X1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_ORYON_X1)
+
+/*
+ * NOTES:
+ * - Qualcomm Kryo 5XX Prime / Gold ID themselves as MIDR_CORTEX_A77
+ * - Qualcomm Kryo 5XX Silver IDs itself as MIDR_QCOM_KRYO_4XX_SILVER
+ * - Qualcomm Kryo 6XX Prime IDs itself as MIDR_CORTEX_X1
+ * - Qualcomm Kryo 6XX Gold IDs itself as ARM_CPU_PART_CORTEX_A78
+ * - Qualcomm Kryo 6XX Silver IDs itself as MIDR_CORTEX_A55
+ */
+
 #define MIDR_NVIDIA_DENVER MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_DENVER)
 #define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL)
+#define MIDR_NVIDIA_OLYMPUS MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_OLYMPUS)
 #define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX)
 #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110)
+#define MIDR_HISI_HIP09 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_HIP09)
+#define MIDR_HISI_HIP12 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_HIP12)
 #define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM)
 #define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM)
 #define MIDR_APPLE_M1_ICESTORM_PRO MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM_PRO)
@@ -221,15 +247,25 @@
 /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
 #define MIDR_FUJITSU_ERRATUM_010001		MIDR_FUJITSU_A64FX
 #define MIDR_FUJITSU_ERRATUM_010001_MASK	(~MIDR_CPU_VAR_REV(1, 0))
-#define TCR_CLEAR_FUJITSU_ERRATUM_010001	(TCR_NFD1 | TCR_NFD0)
+#define TCR_CLEAR_FUJITSU_ERRATUM_010001	(TCR_EL1_NFD1 | TCR_EL1_NFD0)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/sysreg.h>
 
 #define read_cpuid(reg)			read_sysreg_s(SYS_ ## reg)
 
 /*
+ * The CPU ID never changes at run time, so we might as well tell the
+ * compiler that it's constant.  Use this function to read the CPU ID
+ * rather than directly reading processor_id or read_cpuid() directly.
+ */
+static inline u32 __attribute_const__ read_cpuid_id(void)
+{
+	return read_cpuid(MIDR_EL1);
+}
+
+/*
  * Represent a range of MIDR values for a given CPU model and a
  * range of variant/revision values.
  *
@@ -264,30 +300,14 @@ static inline bool midr_is_cpu_model_range(u32 midr, u32 model, u32 rv_min,
 	return _model == model && rv >= rv_min && rv <= rv_max;
 }
 
-static inline bool is_midr_in_range(u32 midr, struct midr_range const *range)
-{
-	return midr_is_cpu_model_range(midr, range->model,
-				       range->rv_min, range->rv_max);
-}
-
-static inline bool
-is_midr_in_range_list(u32 midr, struct midr_range const *ranges)
-{
-	while (ranges->model)
-		if (is_midr_in_range(midr, ranges++))
-			return true;
-	return false;
-}
+struct target_impl_cpu {
+	u64 midr;
+	u64 revidr;
+	u64 aidr;
+};
 
-/*
- * The CPU ID never changes at run time, so we might as well tell the
- * compiler that it's constant.  Use this function to read the CPU ID
- * rather than directly reading processor_id or read_cpuid() directly.
- */
-static inline u32 __attribute_const__ read_cpuid_id(void)
-{
-	return read_cpuid(MIDR_EL1);
-}
+bool cpu_errata_set_target_impl(u64 num, void *impl_cpus);
+bool is_midr_in_range_list(struct midr_range const *ranges);
 
 static inline u64 __attribute_const__ read_cpuid_mpidr(void)
 {
@@ -308,6 +328,6 @@ static inline u32 __attribute_const__ read_cpuid_cachetype(void)
 {
 	return read_cpuid(CTR_EL0);
 }
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arm64/include/asm/current.h b/arch/arm64/include/asm/current.h
index 54ceae0874c7..c92912eaf186 100644
--- a/arch/arm64/include/asm/current.h
+++ b/arch/arm64/include/asm/current.h
@@ -4,7 +4,7 @@
 
 #include <linux/compiler.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct task_struct;
 
@@ -23,7 +23,7 @@ static __always_inline struct task_struct *get_current(void)
 
 #define current get_current()
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_CURRENT_H */
 
diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
index fbb5c99eb2f9..5fca48009043 100644
--- a/arch/arm64/include/asm/daifflags.h
+++ b/arch/arm64/include/asm/daifflags.h
@@ -128,7 +128,7 @@ static inline void local_daif_inherit(struct pt_regs *regs)
 {
 	unsigned long flags = regs->pstate & DAIF_MASK;
 
-	if (interrupts_enabled(regs))
+	if (!regs_irqs_disabled(regs))
 		trace_hardirqs_on();
 
 	if (system_uses_irq_prio_masking())
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index 8f6ba31b8658..8d5f92418838 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -13,14 +13,8 @@
 #include <asm/ptrace.h>
 
 /* Low-level stepping controls. */
-#define DBG_MDSCR_SS		(1 << 0)
 #define DBG_SPSR_SS		(1 << 21)
 
-/* MDSCR_EL1 enabling bits */
-#define DBG_MDSCR_KDE		(1 << 13)
-#define DBG_MDSCR_MDE		(1 << 15)
-#define DBG_MDSCR_MASK		~(DBG_MDSCR_KDE | DBG_MDSCR_MDE)
-
 #define	DBG_ESR_EVT(x)		(((x) >> 27) & 0x7)
 
 /* AArch64 */
@@ -54,7 +48,7 @@
 #define AARCH32_BREAK_THUMB2_LO	0xf7f0
 #define AARCH32_BREAK_THUMB2_HI	0xa000
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 struct task_struct;
 
 #define DBG_ARCH_ID_RESERVED	0	/* In case of ptrace ABI updates. */
@@ -62,30 +56,6 @@ struct task_struct;
 #define DBG_HOOK_HANDLED	0
 #define DBG_HOOK_ERROR		1
 
-struct step_hook {
-	struct list_head node;
-	int (*fn)(struct pt_regs *regs, unsigned long esr);
-};
-
-void register_user_step_hook(struct step_hook *hook);
-void unregister_user_step_hook(struct step_hook *hook);
-
-void register_kernel_step_hook(struct step_hook *hook);
-void unregister_kernel_step_hook(struct step_hook *hook);
-
-struct break_hook {
-	struct list_head node;
-	int (*fn)(struct pt_regs *regs, unsigned long esr);
-	u16 imm;
-	u16 mask; /* These bits are ignored when comparing with imm */
-};
-
-void register_user_break_hook(struct break_hook *hook);
-void unregister_user_break_hook(struct break_hook *hook);
-
-void register_kernel_break_hook(struct break_hook *hook);
-void unregister_kernel_break_hook(struct break_hook *hook);
-
 u8 debug_monitors_arch(void);
 
 enum dbg_active_el {
@@ -108,17 +78,15 @@ void kernel_rewind_single_step(struct pt_regs *regs);
 void kernel_fastforward_single_step(struct pt_regs *regs);
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-int reinstall_suspended_bps(struct pt_regs *regs);
+bool try_step_suspended_breakpoints(struct pt_regs *regs);
 #else
-static inline int reinstall_suspended_bps(struct pt_regs *regs)
+static inline bool try_step_suspended_breakpoints(struct pt_regs *regs)
 {
-	return -ENODEV;
+	return false;
 }
 #endif
 
-int aarch32_break_handler(struct pt_regs *regs);
-
-void debug_traps_init(void);
+bool try_handle_aarch32_break(struct pt_regs *regs);
 
-#endif	/* __ASSEMBLY */
+#endif	/* __ASSEMBLER__ */
 #endif	/* __ASM_DEBUG_MONITORS_H */
diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index bcd5622aa096..aa91165ca140 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -126,21 +126,14 @@ static inline void efi_set_pgd(struct mm_struct *mm)
 		if (mm != current->active_mm) {
 			/*
 			 * Update the current thread's saved ttbr0 since it is
-			 * restored as part of a return from exception. Enable
-			 * access to the valid TTBR0_EL1 and invoke the errata
-			 * workaround directly since there is no return from
-			 * exception when invoking the EFI run-time services.
+			 * restored as part of a return from exception.
 			 */
 			update_saved_ttbr0(current, mm);
-			uaccess_ttbr0_enable();
-			post_ttbr_update_workaround();
 		} else {
 			/*
-			 * Defer the switch to the current thread's TTBR0_EL1
-			 * until uaccess_enable(). Restore the current
-			 * thread's saved ttbr0 corresponding to its active_mm
+			 * Restore the current thread's saved ttbr0
+			 * corresponding to its active_mm
 			 */
-			uaccess_ttbr0_disable();
 			update_saved_ttbr0(current, current->active_mm);
 		}
 	}
diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
index 85ef966c08cd..cacd20df1786 100644
--- a/arch/arm64/include/asm/el2_setup.h
+++ b/arch/arm64/include/asm/el2_setup.h
@@ -7,7 +7,7 @@
 #ifndef __ARM_KVM_INIT_H__
 #define __ARM_KVM_INIT_H__
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #error Assembly-only header
 #endif
 
@@ -16,6 +16,58 @@
 #include <asm/sysreg.h>
 #include <linux/irqchip/arm-gic-v3.h>
 
+.macro init_el2_hcr	val
+	mov_q	x0, \val
+
+	/*
+	 * Compliant CPUs advertise their VHE-onlyness with
+	 * ID_AA64MMFR4_EL1.E2H0 < 0. On such CPUs HCR_EL2.E2H is RES1, but it
+	 * can reset into an UNKNOWN state and might not read as 1 until it has
+	 * been initialized explicitly.
+	 * Initialize HCR_EL2.E2H so that later code can rely upon HCR_EL2.E2H
+	 * indicating whether the CPU is running in E2H mode.
+	 */
+	mrs_s	x1, SYS_ID_AA64MMFR4_EL1
+	sbfx	x1, x1, #ID_AA64MMFR4_EL1_E2H0_SHIFT, #ID_AA64MMFR4_EL1_E2H0_WIDTH
+	cmp	x1, #0
+	b.lt	.LnE2H0_\@
+
+	/*
+	 * Unfortunately, HCR_EL2.E2H can be RES1 even if not advertised
+	 * as such via ID_AA64MMFR4_EL1.E2H0:
+	 *
+	 * - Fruity CPUs predate the !FEAT_E2H0 relaxation, and seem to
+	 *   have HCR_EL2.E2H implemented as RAO/WI.
+	 *
+	 * - On CPUs that lack FEAT_FGT, a hypervisor can't trap guest
+	 *   reads of ID_AA64MMFR4_EL1 to advertise !FEAT_E2H0. NV
+	 *   guests on these hosts can write to HCR_EL2.E2H without
+	 *   trapping to the hypervisor, but these writes have no
+	 *   functional effect.
+	 *
+	 * Handle both cases by checking for an essential VHE property
+	 * (system register remapping) to decide whether we're
+	 * effectively VHE-only or not.
+	 */
+	msr_hcr_el2 x0		// Setup HCR_EL2 as nVHE
+	isb
+	mov	x1, #1		// Write something to FAR_EL1
+	msr	far_el1, x1
+	isb
+	mov	x1, #2		// Try to overwrite it via FAR_EL2
+	msr	far_el2, x1
+	isb
+	mrs	x1, far_el1	// If we see the latest write in FAR_EL1,
+	cmp	x1, #2		// we can safely assume we are VHE only.
+	b.ne	.LnVHE_\@	// Otherwise, we know that nVHE works.
+
+.LnE2H0_\@:
+	orr	x0, x0, #HCR_E2H
+	msr_hcr_el2 x0
+	isb
+.LnVHE_\@:
+.endm
+
 .macro __init_el2_sctlr
 	mov_q	x0, INIT_SCTLR_EL2_MMU_OFF
 	msr	sctlr_el2, x0
@@ -26,7 +78,7 @@
 	mrs	x0, id_aa64mmfr1_el1
 	ubfx	x0, x0, #ID_AA64MMFR1_EL1_HCX_SHIFT, #4
 	cbz	x0, .Lskip_hcrx_\@
-	mov_q	x0, HCRX_HOST_FLAGS
+	mov_q	x0, (HCRX_EL2_MSCEn | HCRX_EL2_TCR2En | HCRX_EL2_EnFPM)
 
         /* Enable GCS if supported */
 	mrs_s	x1, SYS_ID_AA64PFR1_EL1
@@ -65,6 +117,14 @@
 	msr	cntvoff_el2, xzr		// Clear virtual offset
 .endm
 
+/* Branch to skip_label if SPE version is less than given version */
+.macro __spe_vers_imp skip_label, version, tmp
+    mrs    \tmp, id_aa64dfr0_el1
+    ubfx   \tmp, \tmp, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4
+    cmp    \tmp, \version
+    b.lt   \skip_label
+.endm
+
 .macro __init_el2_debug
 	mrs	x1, id_aa64dfr0_el1
 	ubfx	x0, x1, #ID_AA64DFR0_EL1_PMUVer_SHIFT, #4
@@ -77,8 +137,7 @@
 	csel	x2, xzr, x0, eq			// all PMU counters from EL1
 
 	/* Statistical profiling */
-	ubfx	x0, x1, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4
-	cbz	x0, .Lskip_spe_\@		// Skip if SPE not present
+	__spe_vers_imp .Lskip_spe_\@, ID_AA64DFR0_EL1_PMSVer_IMP, x0 // Skip if SPE not present
 
 	mrs_s	x0, SYS_PMBIDR_EL1              // If SPE available at EL2,
 	and	x0, x0, #(1 << PMBIDR_EL1_P_SHIFT)
@@ -87,7 +146,7 @@
 		      1 << PMSCR_EL2_PA_SHIFT)
 	msr_s	SYS_PMSCR_EL2, x0		// addresses and physical counter
 .Lskip_spe_el2_\@:
-	mov	x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
+	mov	x0, #MDCR_EL2_E2PB_MASK
 	orr	x2, x2, x0			// If we don't have VHE, then
 						// use EL1&0 translation.
 
@@ -100,7 +159,7 @@
 	and	x0, x0, TRBIDR_EL1_P
 	cbnz	x0, .Lskip_trace_\@		// If TRBE is available at EL2
 
-	mov	x0, #(MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT)
+	mov	x0, #MDCR_EL2_E2TB_MASK
 	orr	x2, x2, x0			// allow the EL1&0 translation
 						// to own it.
 
@@ -139,6 +198,50 @@
 .Lskip_gicv3_\@:
 .endm
 
+/* GICv5 system register access */
+.macro __init_el2_gicv5
+	mrs_s	x0, SYS_ID_AA64PFR2_EL1
+	ubfx	x0, x0, #ID_AA64PFR2_EL1_GCIE_SHIFT, #4
+	cbz	x0, .Lskip_gicv5_\@
+
+	mov	x0, #(ICH_HFGITR_EL2_GICRCDNMIA		| \
+		      ICH_HFGITR_EL2_GICRCDIA		| \
+		      ICH_HFGITR_EL2_GICCDDI		| \
+		      ICH_HFGITR_EL2_GICCDEOI		| \
+		      ICH_HFGITR_EL2_GICCDHM		| \
+		      ICH_HFGITR_EL2_GICCDRCFG		| \
+		      ICH_HFGITR_EL2_GICCDPEND		| \
+		      ICH_HFGITR_EL2_GICCDAFF		| \
+		      ICH_HFGITR_EL2_GICCDPRI		| \
+		      ICH_HFGITR_EL2_GICCDDIS		| \
+		      ICH_HFGITR_EL2_GICCDEN)
+	msr_s	SYS_ICH_HFGITR_EL2, x0		// Disable instruction traps
+	mov_q	x0, (ICH_HFGRTR_EL2_ICC_PPI_ACTIVERn_EL1	| \
+		     ICH_HFGRTR_EL2_ICC_PPI_PRIORITYRn_EL1	| \
+		     ICH_HFGRTR_EL2_ICC_PPI_PENDRn_EL1		| \
+		     ICH_HFGRTR_EL2_ICC_PPI_ENABLERn_EL1	| \
+		     ICH_HFGRTR_EL2_ICC_PPI_HMRn_EL1		| \
+		     ICH_HFGRTR_EL2_ICC_IAFFIDR_EL1		| \
+		     ICH_HFGRTR_EL2_ICC_ICSR_EL1		| \
+		     ICH_HFGRTR_EL2_ICC_PCR_EL1			| \
+		     ICH_HFGRTR_EL2_ICC_HPPIR_EL1		| \
+		     ICH_HFGRTR_EL2_ICC_HAPR_EL1		| \
+		     ICH_HFGRTR_EL2_ICC_CR0_EL1			| \
+		     ICH_HFGRTR_EL2_ICC_IDRn_EL1		| \
+		     ICH_HFGRTR_EL2_ICC_APR_EL1)
+	msr_s	SYS_ICH_HFGRTR_EL2, x0		// Disable reg read traps
+	mov_q	x0, (ICH_HFGWTR_EL2_ICC_PPI_ACTIVERn_EL1	| \
+		     ICH_HFGWTR_EL2_ICC_PPI_PRIORITYRn_EL1	| \
+		     ICH_HFGWTR_EL2_ICC_PPI_PENDRn_EL1		| \
+		     ICH_HFGWTR_EL2_ICC_PPI_ENABLERn_EL1	| \
+		     ICH_HFGWTR_EL2_ICC_ICSR_EL1		| \
+		     ICH_HFGWTR_EL2_ICC_PCR_EL1			| \
+		     ICH_HFGWTR_EL2_ICC_CR0_EL1			| \
+		     ICH_HFGWTR_EL2_ICC_APR_EL1)
+	msr_s	SYS_ICH_HFGWTR_EL2, x0		// Disable reg write traps
+.Lskip_gicv5_\@:
+.endm
+
 .macro __init_el2_hstr
 	msr	hstr_el2, xzr			// Disable CP15 traps to EL2
 .endm
@@ -154,7 +257,7 @@
 /* Coprocessor traps */
 .macro __init_el2_cptr
 	__check_hvhe .LnVHE_\@, x1
-	mov	x0, #CPACR_ELx_FPEN
+	mov	x0, #CPACR_EL1_FPEN
 	msr	cpacr_el1, x0
 	b	.Lskip_set_cptr_\@
 .LnVHE_\@:
@@ -163,6 +266,28 @@
 .Lskip_set_cptr_\@:
 .endm
 
+/*
+ * Configure BRBE to permit recording cycle counts and branch mispredicts.
+ *
+ * At any EL, to record cycle counts BRBE requires that both BRBCR_EL2.CC=1 and
+ * BRBCR_EL1.CC=1.
+ *
+ * At any EL, to record branch mispredicts BRBE requires that both
+ * BRBCR_EL2.MPRED=1 and BRBCR_EL1.MPRED=1.
+ *
+ * Set {CC,MPRED} in BRBCR_EL2 in case nVHE mode is used and we are
+ * executing in EL1.
+ */
+.macro __init_el2_brbe
+	mrs	x1, id_aa64dfr0_el1
+	ubfx	x1, x1, #ID_AA64DFR0_EL1_BRBE_SHIFT, #4
+	cbz	x1, .Lskip_brbe_\@
+
+	mov_q	x0, BRBCR_ELx_CC | BRBCR_ELx_MPRED
+	msr_s	SYS_BRBCR_EL2, x0
+.Lskip_brbe_\@:
+.endm
+
 /* Disable any fine grained traps */
 .macro __init_el2_fgt
 	mrs	x1, id_aa64mmfr0_el1
@@ -170,34 +295,76 @@
 	cbz	x1, .Lskip_fgt_\@
 
 	mov	x0, xzr
-	mrs	x1, id_aa64dfr0_el1
-	ubfx	x1, x1, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4
-	cmp	x1, #3
-	b.lt	.Lskip_spe_fgt_\@
+	mov	x2, xzr
+	/* If SPEv1p2 is implemented, */
+	__spe_vers_imp .Lskip_spe_fgt_\@, #ID_AA64DFR0_EL1_PMSVer_V1P2, x1
 	/* Disable PMSNEVFR_EL1 read and write traps */
-	orr	x0, x0, #(1 << 62)
+	orr	x0, x0, #HDFGRTR_EL2_nPMSNEVFR_EL1_MASK
+	orr	x2, x2, #HDFGWTR_EL2_nPMSNEVFR_EL1_MASK
 
 .Lskip_spe_fgt_\@:
+	mrs	x1, id_aa64dfr0_el1
+	ubfx	x1, x1, #ID_AA64DFR0_EL1_BRBE_SHIFT, #4
+	cbz	x1, .Lskip_brbe_fgt_\@
+
+	/*
+	 * Disable read traps for the following registers
+	 *
+	 * [BRBSRC|BRBTGT|RBINF]_EL1
+	 * [BRBSRCINJ|BRBTGTINJ|BRBINFINJ|BRBTS]_EL1
+	 */
+	orr	x0, x0, #HDFGRTR_EL2_nBRBDATA_MASK
+
+	/*
+	 * Disable write traps for the following registers
+	 *
+	 * [BRBSRCINJ|BRBTGTINJ|BRBINFINJ|BRBTS]_EL1
+	 */
+	orr	x2, x2, #HDFGWTR_EL2_nBRBDATA_MASK
+
+	/* Disable read and write traps for [BRBCR|BRBFCR]_EL1 */
+	orr	x0, x0, #HDFGRTR_EL2_nBRBCTL_MASK
+	orr	x2, x2, #HDFGWTR_EL2_nBRBCTL_MASK
+
+	/* Disable read traps for BRBIDR_EL1 */
+	orr	x0, x0, #HDFGRTR_EL2_nBRBIDR_MASK
+
+.Lskip_brbe_fgt_\@:
+
+.Lset_debug_fgt_\@:
 	msr_s	SYS_HDFGRTR_EL2, x0
-	msr_s	SYS_HDFGWTR_EL2, x0
+	msr_s	SYS_HDFGWTR_EL2, x2
 
 	mov	x0, xzr
+	mov	x2, xzr
+
+	mrs	x1, id_aa64dfr0_el1
+	ubfx	x1, x1, #ID_AA64DFR0_EL1_BRBE_SHIFT, #4
+	cbz	x1, .Lskip_brbe_insn_fgt_\@
+
+	/* Disable traps for BRBIALL instruction */
+	orr	x2, x2, #HFGITR_EL2_nBRBIALL_MASK
+
+	/* Disable traps for BRBINJ instruction */
+	orr	x2, x2, #HFGITR_EL2_nBRBINJ_MASK
+
+.Lskip_brbe_insn_fgt_\@:
 	mrs	x1, id_aa64pfr1_el1
 	ubfx	x1, x1, #ID_AA64PFR1_EL1_SME_SHIFT, #4
-	cbz	x1, .Lskip_debug_fgt_\@
+	cbz	x1, .Lskip_sme_fgt_\@
 
 	/* Disable nVHE traps of TPIDR2 and SMPRI */
-	orr	x0, x0, #HFGxTR_EL2_nSMPRI_EL1_MASK
-	orr	x0, x0, #HFGxTR_EL2_nTPIDR2_EL0_MASK
+	orr	x0, x0, #HFGRTR_EL2_nSMPRI_EL1_MASK
+	orr	x0, x0, #HFGRTR_EL2_nTPIDR2_EL0_MASK
 
-.Lskip_debug_fgt_\@:
+.Lskip_sme_fgt_\@:
 	mrs_s	x1, SYS_ID_AA64MMFR3_EL1
 	ubfx	x1, x1, #ID_AA64MMFR3_EL1_S1PIE_SHIFT, #4
 	cbz	x1, .Lskip_pie_fgt_\@
 
 	/* Disable trapping of PIR_EL1 / PIRE0_EL1 */
-	orr	x0, x0, #HFGxTR_EL2_nPIR_EL1
-	orr	x0, x0, #HFGxTR_EL2_nPIRE0_EL1
+	orr	x0, x0, #HFGRTR_EL2_nPIR_EL1
+	orr	x0, x0, #HFGRTR_EL2_nPIRE0_EL1
 
 .Lskip_pie_fgt_\@:
 	mrs_s	x1, SYS_ID_AA64MMFR3_EL1
@@ -205,22 +372,24 @@
 	cbz	x1, .Lskip_poe_fgt_\@
 
 	/* Disable trapping of POR_EL0 */
-	orr	x0, x0, #HFGxTR_EL2_nPOR_EL0
+	orr	x0, x0, #HFGRTR_EL2_nPOR_EL0
 
 .Lskip_poe_fgt_\@:
 	/* GCS depends on PIE so we don't check it if PIE is absent */
 	mrs_s	x1, SYS_ID_AA64PFR1_EL1
 	ubfx	x1, x1, #ID_AA64PFR1_EL1_GCS_SHIFT, #4
-	cbz	x1, .Lset_fgt_\@
+	cbz	x1, .Lskip_gce_fgt_\@
 
 	/* Disable traps of access to GCS registers at EL0 and EL1 */
-	orr	x0, x0, #HFGxTR_EL2_nGCS_EL1_MASK
-	orr	x0, x0, #HFGxTR_EL2_nGCS_EL0_MASK
+	orr	x0, x0, #HFGRTR_EL2_nGCS_EL1_MASK
+	orr	x0, x0, #HFGRTR_EL2_nGCS_EL0_MASK
+
+.Lskip_gce_fgt_\@:
 
 .Lset_fgt_\@:
 	msr_s	SYS_HFGRTR_EL2, x0
 	msr_s	SYS_HFGWTR_EL2, x0
-	msr_s	SYS_HFGITR_EL2, xzr
+	msr_s	SYS_HFGITR_EL2, x2
 
 	mrs	x1, id_aa64pfr0_el1		// AMU traps UNDEF without AMU
 	ubfx	x1, x1, #ID_AA64PFR0_EL1_AMU_SHIFT, #4
@@ -233,33 +402,39 @@
 .Lskip_fgt_\@:
 .endm
 
-.macro __init_el2_gcs
-	mrs_s	x1, SYS_ID_AA64PFR1_EL1
-	ubfx	x1, x1, #ID_AA64PFR1_EL1_GCS_SHIFT, #4
-	cbz	x1, .Lskip_gcs_\@
-
-	/* Ensure GCS is not enabled when we start trying to do BLs */
-	msr_s	SYS_GCSCR_EL1, xzr
-	msr_s	SYS_GCSCRE0_EL1, xzr
-.Lskip_gcs_\@:
-.endm
-
-.macro __init_el2_nvhe_prepare_eret
-	mov	x0, #INIT_PSTATE_EL1
-	msr	spsr_el2, x0
-.endm
+.macro __init_el2_fgt2
+	mrs	x1, id_aa64mmfr0_el1
+	ubfx	x1, x1, #ID_AA64MMFR0_EL1_FGT_SHIFT, #4
+	cmp	x1, #ID_AA64MMFR0_EL1_FGT_FGT2
+	b.lt	.Lskip_fgt2_\@
 
-.macro __init_el2_mpam
-	/* Memory Partitioning And Monitoring: disable EL2 traps */
-	mrs	x1, id_aa64pfr0_el1
-	ubfx	x0, x1, #ID_AA64PFR0_EL1_MPAM_SHIFT, #4
-	cbz	x0, .Lskip_mpam_\@		// skip if no MPAM
-	msr_s	SYS_MPAM2_EL2, xzr		// use the default partition
-						// and disable lower traps
-	mrs_s	x0, SYS_MPAMIDR_EL1
-	tbz	x0, #MPAMIDR_EL1_HAS_HCR_SHIFT, .Lskip_mpam_\@	// skip if no MPAMHCR reg
-	msr_s	SYS_MPAMHCR_EL2, xzr		// clear TRAP_MPAMIDR_EL1 -> EL2
-.Lskip_mpam_\@:
+	mov	x0, xzr
+	mrs	x1, id_aa64dfr0_el1
+	ubfx	x1, x1, #ID_AA64DFR0_EL1_PMUVer_SHIFT, #4
+	cmp	x1, #ID_AA64DFR0_EL1_PMUVer_V3P9
+	b.lt	.Lskip_pmuv3p9_\@
+
+	orr	x0, x0, #HDFGRTR2_EL2_nPMICNTR_EL0
+	orr	x0, x0, #HDFGRTR2_EL2_nPMICFILTR_EL0
+	orr	x0, x0, #HDFGRTR2_EL2_nPMUACR_EL1
+.Lskip_pmuv3p9_\@:
+	/* If SPE is implemented, */
+	__spe_vers_imp .Lskip_spefds_\@, ID_AA64DFR0_EL1_PMSVer_IMP, x1
+	/* we can read PMSIDR and */
+	mrs_s	x1, SYS_PMSIDR_EL1
+	and	x1, x1,  #PMSIDR_EL1_FDS
+	/* if FEAT_SPE_FDS is implemented, */
+	cbz	x1, .Lskip_spefds_\@
+	/* disable traps of PMSDSFR to EL2. */
+	orr	x0, x0, #HDFGRTR2_EL2_nPMSDSFR_EL1
+
+.Lskip_spefds_\@:
+	msr_s   SYS_HDFGRTR2_EL2, x0
+	msr_s   SYS_HDFGWTR2_EL2, x0
+	msr_s   SYS_HFGRTR2_EL2, xzr
+	msr_s   SYS_HFGWTR2_EL2, xzr
+	msr_s   SYS_HFGITR2_EL2, xzr
+.Lskip_fgt2_\@:
 .endm
 
 /**
@@ -275,15 +450,16 @@
 	__init_el2_hcrx
 	__init_el2_timers
 	__init_el2_debug
+	__init_el2_brbe
 	__init_el2_lor
 	__init_el2_stage2
 	__init_el2_gicv3
+	__init_el2_gicv5
 	__init_el2_hstr
-	__init_el2_mpam
 	__init_el2_nvhe_idregs
 	__init_el2_cptr
 	__init_el2_fgt
-        __init_el2_gcs
+	__init_el2_fgt2
 .endm
 
 #ifndef __KVM_NVHE_HYPERVISOR__
@@ -325,6 +501,23 @@
 #endif
 
 .macro finalise_el2_state
+	check_override id_aa64pfr0, ID_AA64PFR0_EL1_MPAM_SHIFT, .Linit_mpam_\@, .Lskip_mpam_\@, x1, x2
+
+.Linit_mpam_\@:
+	msr_s	SYS_MPAM2_EL2, xzr		// use the default partition
+						// and disable lower traps
+	mrs_s	x0, SYS_MPAMIDR_EL1
+	tbz	x0, #MPAMIDR_EL1_HAS_HCR_SHIFT, .Lskip_mpam_\@  // skip if no MPAMHCR reg
+	msr_s   SYS_MPAMHCR_EL2, xzr		// clear TRAP_MPAMIDR_EL1 -> EL2
+
+.Lskip_mpam_\@:
+	check_override id_aa64pfr1, ID_AA64PFR1_EL1_GCS_SHIFT, .Linit_gcs_\@, .Lskip_gcs_\@, x1, x2
+
+.Linit_gcs_\@:
+	msr_s	SYS_GCSCR_EL1, xzr
+	msr_s	SYS_GCSCRE0_EL1, xzr
+
+.Lskip_gcs_\@:
 	check_override id_aa64pfr0, ID_AA64PFR0_EL1_SVE_SHIFT, .Linit_sve_\@, .Lskip_sve_\@, x1, x2
 
 .Linit_sve_\@:	/* SVE register access */
@@ -332,7 +525,7 @@
 
 	// (h)VHE case
 	mrs	x0, cpacr_el1			// Disable SVE traps
-	orr	x0, x0, #CPACR_ELx_ZEN
+	orr	x0, x0, #CPACR_EL1_ZEN
 	msr	cpacr_el1, x0
 	b	.Lskip_set_cptr_\@
 
@@ -353,7 +546,7 @@
 
 	// (h)VHE case
 	mrs	x0, cpacr_el1			// Disable SME traps
-	orr	x0, x0, #CPACR_ELx_SMEN
+	orr	x0, x0, #CPACR_EL1_SMEN
 	msr	cpacr_el1, x0
 	b	.Lskip_set_cptr_sme_\@
 
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index 3f93f4eef953..d2779d604c7b 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -133,7 +133,7 @@
 #define ELF_ET_DYN_BASE		(2 * DEFAULT_MAP_WINDOW_64 / 3)
 #endif /* CONFIG_ARM64_FORCE_52BIT */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <uapi/linux/elf.h>
 #include <linux/bug.h>
@@ -293,6 +293,6 @@ static inline int arch_check_elf(void *ehdr, bool has_interp,
 	return 0;
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arm64/include/asm/entry-common.h b/arch/arm64/include/asm/entry-common.h
new file mode 100644
index 000000000000..cab8cd78f693
--- /dev/null
+++ b/arch/arm64/include/asm/entry-common.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_ARM64_ENTRY_COMMON_H
+#define _ASM_ARM64_ENTRY_COMMON_H
+
+#include <linux/thread_info.h>
+
+#include <asm/cpufeature.h>
+#include <asm/daifflags.h>
+#include <asm/fpsimd.h>
+#include <asm/mte.h>
+#include <asm/stacktrace.h>
+
+#define ARCH_EXIT_TO_USER_MODE_WORK (_TIF_MTE_ASYNC_FAULT | _TIF_FOREIGN_FPSTATE)
+
+static __always_inline void arch_exit_to_user_mode_work(struct pt_regs *regs,
+							unsigned long ti_work)
+{
+	if (ti_work & _TIF_MTE_ASYNC_FAULT) {
+		clear_thread_flag(TIF_MTE_ASYNC_FAULT);
+		send_sig_fault(SIGSEGV, SEGV_MTEAERR, (void __user *)NULL, current);
+	}
+
+	if (ti_work & _TIF_FOREIGN_FPSTATE)
+		fpsimd_restore_current_state();
+}
+
+#define arch_exit_to_user_mode_work arch_exit_to_user_mode_work
+
+static inline bool arch_irqentry_exit_need_resched(void)
+{
+	/*
+	 * DAIF.DA are cleared at the start of IRQ/FIQ handling, and when GIC
+	 * priority masking is used the GIC irqchip driver will clear DAIF.IF
+	 * using gic_arch_enable_irqs() for normal IRQs. If anything is set in
+	 * DAIF we must have handled an NMI, so skip preemption.
+	 */
+	if (system_uses_irq_prio_masking() && read_sysreg(daif))
+		return false;
+
+	/*
+	 * Preempting a task from an IRQ means we leave copies of PSTATE
+	 * on the stack. cpufeature's enable calls may modify PSTATE, but
+	 * resuming one of these preempted tasks would undo those changes.
+	 *
+	 * Only allow a task to be preempted once cpufeatures have been
+	 * enabled.
+	 */
+	if (!system_capabilities_finalized())
+		return false;
+
+	return true;
+}
+
+#define arch_irqentry_exit_need_resched arch_irqentry_exit_need_resched
+
+#endif /* _ASM_ARM64_ENTRY_COMMON_H */
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index d1b1a33f9a8b..4975a92cbd17 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -20,7 +20,8 @@
 #define ESR_ELx_EC_FP_ASIMD	UL(0x07)
 #define ESR_ELx_EC_CP10_ID	UL(0x08)	/* EL2 only */
 #define ESR_ELx_EC_PAC		UL(0x09)	/* EL2 and above */
-/* Unallocated EC: 0x0A - 0x0B */
+#define ESR_ELx_EC_OTHER	UL(0x0A)
+/* Unallocated EC: 0x0B */
 #define ESR_ELx_EC_CP14_64	UL(0x0C)
 #define ESR_ELx_EC_BTI		UL(0x0D)
 #define ESR_ELx_EC_ILL		UL(0x0E)
@@ -99,6 +100,8 @@
 #define ESR_ELx_AET_CE		(UL(6) << ESR_ELx_AET_SHIFT)
 
 /* Shared ISS field definitions for Data/Instruction aborts */
+#define ESR_ELx_VNCR_SHIFT	(13)
+#define ESR_ELx_VNCR		(UL(1) << ESR_ELx_VNCR_SHIFT)
 #define ESR_ELx_SET_SHIFT	(11)
 #define ESR_ELx_SET_MASK	(UL(3) << ESR_ELx_SET_SHIFT)
 #define ESR_ELx_FnV_SHIFT	(10)
@@ -121,6 +124,15 @@
 #define ESR_ELx_FSC_SEA_TTW(n)	(0x14 + (n))
 #define ESR_ELx_FSC_SECC	(0x18)
 #define ESR_ELx_FSC_SECC_TTW(n)	(0x1c + (n))
+#define ESR_ELx_FSC_ADDRSZ	(0x00)
+
+/*
+ * Annoyingly, the negative levels for Address size faults aren't laid out
+ * contiguously (or in the desired order)
+ */
+#define ESR_ELx_FSC_ADDRSZ_nL(n)	((n) == -1 ? 0x25 : 0x2C)
+#define ESR_ELx_FSC_ADDRSZ_L(n)		((n) < 0 ? ESR_ELx_FSC_ADDRSZ_nL(n) : \
+						   (ESR_ELx_FSC_ADDRSZ + (n)))
 
 /* Status codes for individual page table levels */
 #define ESR_ELx_FSC_ACCESS_L(n)	(ESR_ELx_FSC_ACCESS + (n))
@@ -161,8 +173,6 @@
 #define ESR_ELx_Xs_MASK		(GENMASK_ULL(4, 0))
 
 /* ISS field definitions for exceptions taken in to Hyp */
-#define ESR_ELx_FSC_ADDRSZ	(0x00)
-#define ESR_ELx_FSC_ADDRSZ_L(n)	(ESR_ELx_FSC_ADDRSZ + (n))
 #define ESR_ELx_CV		(UL(1) << 24)
 #define ESR_ELx_COND_SHIFT	(20)
 #define ESR_ELx_COND_MASK	(UL(0xF) << ESR_ELx_COND_SHIFT)
@@ -174,6 +184,13 @@
 #define ESR_ELx_WFx_ISS_WFE	(UL(1) << 0)
 #define ESR_ELx_xVC_IMM_MASK	((UL(1) << 16) - 1)
 
+/* ISS definitions for LD64B/ST64B/{T,P}SBCSYNC instructions */
+#define ESR_ELx_ISS_OTHER_ST64BV	(0)
+#define ESR_ELx_ISS_OTHER_ST64BV0	(1)
+#define ESR_ELx_ISS_OTHER_LDST64B	(2)
+#define ESR_ELx_ISS_OTHER_TSBCSYNC	(3)
+#define ESR_ELx_ISS_OTHER_PSBCSYNC	(4)
+
 #define DISR_EL1_IDS		(UL(1) << 24)
 /*
  * DISR_EL1 and ESR_ELx share the bottom 13 bits, but the RES0 bits may mean
@@ -371,12 +388,14 @@
 /*
  * ISS values for SME traps
  */
+#define ESR_ELx_SME_ISS_SMTC_MASK		GENMASK(2, 0)
+#define ESR_ELx_SME_ISS_SMTC(esr)		((esr) & ESR_ELx_SME_ISS_SMTC_MASK)
 
-#define ESR_ELx_SME_ISS_SME_DISABLED	0
-#define ESR_ELx_SME_ISS_ILL		1
-#define ESR_ELx_SME_ISS_SM_DISABLED	2
-#define ESR_ELx_SME_ISS_ZA_DISABLED	3
-#define ESR_ELx_SME_ISS_ZT_DISABLED	4
+#define ESR_ELx_SME_ISS_SMTC_SME_DISABLED	0
+#define ESR_ELx_SME_ISS_SMTC_ILL		1
+#define ESR_ELx_SME_ISS_SMTC_SM_DISABLED	2
+#define ESR_ELx_SME_ISS_SMTC_ZA_DISABLED	3
+#define ESR_ELx_SME_ISS_SMTC_ZT_DISABLED	4
 
 /* ISS field definitions for MOPS exceptions */
 #define ESR_ELx_MOPS_ISS_MEM_INST	(UL(1) << 24)
@@ -412,7 +431,7 @@
 #define ESR_ELx_IT_GCSPOPCX		6
 #define ESR_ELx_IT_GCSPOPX		7
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/types.h>
 
 static inline unsigned long esr_brk_comment(unsigned long esr)
@@ -433,6 +452,11 @@ static inline bool esr_is_cfi_brk(unsigned long esr)
 	       (esr_brk_comment(esr) & ~CFI_BRK_IMM_MASK) == CFI_BRK_IMM_BASE;
 }
 
+static inline bool esr_is_ubsan_brk(unsigned long esr)
+{
+	return (esr_brk_comment(esr) & ~UBSAN_BRK_MASK) == UBSAN_BRK_IMM;
+}
+
 static inline bool esr_fsc_is_translation_fault(unsigned long esr)
 {
 	esr = esr & ESR_ELx_FSC;
@@ -464,6 +488,39 @@ static inline bool esr_fsc_is_access_flag_fault(unsigned long esr)
 	       (esr == ESR_ELx_FSC_ACCESS_L(0));
 }
 
+static inline bool esr_fsc_is_addr_sz_fault(unsigned long esr)
+{
+	esr &= ESR_ELx_FSC;
+
+	return (esr == ESR_ELx_FSC_ADDRSZ_L(3))	||
+	       (esr == ESR_ELx_FSC_ADDRSZ_L(2))	||
+	       (esr == ESR_ELx_FSC_ADDRSZ_L(1)) ||
+	       (esr == ESR_ELx_FSC_ADDRSZ_L(0))	||
+	       (esr == ESR_ELx_FSC_ADDRSZ_L(-1));
+}
+
+static inline bool esr_fsc_is_sea_ttw(unsigned long esr)
+{
+	esr = esr & ESR_ELx_FSC;
+
+	return (esr == ESR_ELx_FSC_SEA_TTW(3)) ||
+	       (esr == ESR_ELx_FSC_SEA_TTW(2)) ||
+	       (esr == ESR_ELx_FSC_SEA_TTW(1)) ||
+	       (esr == ESR_ELx_FSC_SEA_TTW(0)) ||
+	       (esr == ESR_ELx_FSC_SEA_TTW(-1));
+}
+
+static inline bool esr_fsc_is_secc_ttw(unsigned long esr)
+{
+	esr = esr & ESR_ELx_FSC;
+
+	return (esr == ESR_ELx_FSC_SECC_TTW(3)) ||
+	       (esr == ESR_ELx_FSC_SECC_TTW(2)) ||
+	       (esr == ESR_ELx_FSC_SECC_TTW(1)) ||
+	       (esr == ESR_ELx_FSC_SECC_TTW(0)) ||
+	       (esr == ESR_ELx_FSC_SECC_TTW(-1));
+}
+
 /* Indicate whether ESR.EC==0x1A is for an ERETAx instruction */
 static inline bool esr_iss_is_eretax(unsigned long esr)
 {
@@ -477,6 +534,6 @@ static inline bool esr_iss_is_eretab(unsigned long esr)
 }
 
 const char *esr_get_class_string(unsigned long esr);
-#endif /* __ASSEMBLY */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_ESR_H */
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
index d48fc16584cd..a2da3cb21c24 100644
--- a/arch/arm64/include/asm/exception.h
+++ b/arch/arm64/include/asm/exception.h
@@ -59,8 +59,20 @@ void do_el0_bti(struct pt_regs *regs);
 void do_el1_bti(struct pt_regs *regs, unsigned long esr);
 void do_el0_gcs(struct pt_regs *regs, unsigned long esr);
 void do_el1_gcs(struct pt_regs *regs, unsigned long esr);
-void do_debug_exception(unsigned long addr_if_watchpoint, unsigned long esr,
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+void do_breakpoint(unsigned long esr, struct pt_regs *regs);
+void do_watchpoint(unsigned long addr, unsigned long esr,
 			struct pt_regs *regs);
+#else
+static inline void do_breakpoint(unsigned long esr, struct pt_regs *regs) {}
+static inline void do_watchpoint(unsigned long addr, unsigned long esr,
+			struct pt_regs *regs) {}
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+void do_el0_softstep(unsigned long esr, struct pt_regs *regs);
+void do_el1_softstep(unsigned long esr, struct pt_regs *regs);
+void do_el0_brk64(unsigned long esr, struct pt_regs *regs);
+void do_el1_brk64(unsigned long esr, struct pt_regs *regs);
+void do_bkpt32(unsigned long esr, struct pt_regs *regs);
 void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs);
 void do_sve_acc(unsigned long esr, struct pt_regs *regs);
 void do_sme_acc(unsigned long esr, struct pt_regs *regs);
@@ -77,7 +89,6 @@ void do_el1_fpac(struct pt_regs *regs, unsigned long esr);
 void do_el0_mops(struct pt_regs *regs, unsigned long esr);
 void do_el1_mops(struct pt_regs *regs, unsigned long esr);
 void do_serror(struct pt_regs *regs, unsigned long esr);
-void do_signal(struct pt_regs *regs);
 
 void __noreturn panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far);
 #endif	/* __ASM_EXCEPTION_H */
diff --git a/arch/arm64/include/asm/extable.h b/arch/arm64/include/asm/extable.h
index 72b0e71cc3de..9dc39612bdf5 100644
--- a/arch/arm64/include/asm/extable.h
+++ b/arch/arm64/include/asm/extable.h
@@ -33,6 +33,8 @@ do {							\
 	(b)->data = (tmp).data;				\
 } while (0)
 
+bool insn_may_access_user(unsigned long addr, unsigned long esr);
+
 #ifdef CONFIG_BPF_JIT
 bool ex_handler_bpf(const struct exception_table_entry *ex,
 		    struct pt_regs *regs);
@@ -45,5 +47,5 @@ bool ex_handler_bpf(const struct exception_table_entry *ex,
 }
 #endif /* !CONFIG_BPF_JIT */
 
-bool fixup_exception(struct pt_regs *regs);
+bool fixup_exception(struct pt_regs *regs, unsigned long esr);
 #endif
diff --git a/arch/arm64/include/asm/fixmap.h b/arch/arm64/include/asm/fixmap.h
index 87e307804b99..65555284446e 100644
--- a/arch/arm64/include/asm/fixmap.h
+++ b/arch/arm64/include/asm/fixmap.h
@@ -15,7 +15,7 @@
 #ifndef _ASM_ARM64_FIXMAP_H
 #define _ASM_ARM64_FIXMAP_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/kernel.h>
 #include <linux/math.h>
 #include <linux/sizes.h>
@@ -48,6 +48,12 @@ enum fixed_addresses {
 	FIX_EARLYCON_MEM_BASE,
 	FIX_TEXT_POKE0,
 
+#ifdef CONFIG_KVM
+	/* One slot per CPU, mapping the guest's VNCR page at EL2. */
+	FIX_VNCR_END,
+	FIX_VNCR = FIX_VNCR_END + NR_CPUS,
+#endif
+
 #ifdef CONFIG_ACPI_APEI_GHES
 	/* Used for GHES mapping from assorted contexts */
 	FIX_APEI_GHES_IRQ,
@@ -111,5 +117,5 @@ extern void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t pr
 
 #include <asm-generic/fixmap.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 #endif /* _ASM_ARM64_FIXMAP_H */
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index f2a84efc3618..1d2e33559bd5 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -6,12 +6,13 @@
 #define __ASM_FP_H
 
 #include <asm/errno.h>
+#include <asm/percpu.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 #include <asm/sigcontext.h>
 #include <asm/sysreg.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/bitmap.h>
 #include <linux/build_bug.h>
@@ -76,11 +77,9 @@ extern void fpsimd_load_state(struct user_fpsimd_state *state);
 extern void fpsimd_thread_switch(struct task_struct *next);
 extern void fpsimd_flush_thread(void);
 
-extern void fpsimd_signal_preserve_current_state(void);
 extern void fpsimd_preserve_current_state(void);
 extern void fpsimd_restore_current_state(void);
 extern void fpsimd_update_current_state(struct user_fpsimd_state const *state);
-extern void fpsimd_kvm_prepare(void);
 
 struct cpu_fp_state {
 	struct user_fpsimd_state *st;
@@ -94,9 +93,12 @@ struct cpu_fp_state {
 	enum fp_type to_save;
 };
 
+DECLARE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
+
 extern void fpsimd_bind_state_to_cpu(struct cpu_fp_state *fp_state);
 
 extern void fpsimd_flush_task_state(struct task_struct *target);
+extern void fpsimd_save_and_flush_current_state(void);
 extern void fpsimd_save_and_flush_cpu_state(void);
 
 static inline bool thread_sm_enabled(struct thread_struct *thread)
@@ -109,6 +111,8 @@ static inline bool thread_za_enabled(struct thread_struct *thread)
 	return system_supports_sme() && (thread->svcr & SVCR_ZA_MASK);
 }
 
+extern void task_smstop_sm(struct task_struct *task);
+
 /* Maximum VL that SVE/SME VL-agnostic software can transparently support */
 #define VL_ARCH_MAX 0x100
 
@@ -196,10 +200,8 @@ struct vl_info {
 
 extern void sve_alloc(struct task_struct *task, bool flush);
 extern void fpsimd_release_task(struct task_struct *task);
-extern void fpsimd_sync_to_sve(struct task_struct *task);
-extern void fpsimd_force_sync_to_sve(struct task_struct *task);
-extern void sve_sync_to_fpsimd(struct task_struct *task);
-extern void sve_sync_from_fpsimd_zeropad(struct task_struct *task);
+extern void fpsimd_sync_from_effective_state(struct task_struct *task);
+extern void fpsimd_sync_to_effective_state_zeropad(struct task_struct *task);
 
 extern int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 				 unsigned long vl, unsigned long flags);
@@ -293,14 +295,29 @@ static inline bool sve_vq_available(unsigned int vq)
 	return vq_available(ARM64_VEC_SVE, vq);
 }
 
-size_t sve_state_size(struct task_struct const *task);
+static inline size_t __sve_state_size(unsigned int sve_vl, unsigned int sme_vl)
+{
+	unsigned int vl = max(sve_vl, sme_vl);
+	return SVE_SIG_REGS_SIZE(sve_vq_from_vl(vl));
+}
+
+/*
+ * Return how many bytes of memory are required to store the full SVE
+ * state for task, given task's currently configured vector length.
+ */
+static inline size_t sve_state_size(struct task_struct const *task)
+{
+	unsigned int sve_vl = task_get_sve_vl(task);
+	unsigned int sme_vl = task_get_sme_vl(task);
+	return __sve_state_size(sve_vl, sme_vl);
+}
 
 #else /* ! CONFIG_ARM64_SVE */
 
 static inline void sve_alloc(struct task_struct *task, bool flush) { }
 static inline void fpsimd_release_task(struct task_struct *task) { }
-static inline void sve_sync_to_fpsimd(struct task_struct *task) { }
-static inline void sve_sync_from_fpsimd_zeropad(struct task_struct *task) { }
+static inline void fpsimd_sync_from_effective_state(struct task_struct *task) { }
+static inline void fpsimd_sync_to_effective_state_zeropad(struct task_struct *task) { }
 
 static inline int sve_max_virtualisable_vl(void)
 {
@@ -334,6 +351,11 @@ static inline void vec_update_vq_map(enum vec_type t) { }
 static inline int vec_verify_vq_map(enum vec_type t) { return 0; }
 static inline void sve_setup(void) { }
 
+static inline size_t __sve_state_size(unsigned int sve_vl, unsigned int sme_vl)
+{
+	return 0;
+}
+
 static inline size_t sve_state_size(struct task_struct const *task)
 {
 	return 0;
@@ -386,6 +408,16 @@ extern int sme_set_current_vl(unsigned long arg);
 extern int sme_get_current_vl(void);
 extern void sme_suspend_exit(void);
 
+static inline size_t __sme_state_size(unsigned int sme_vl)
+{
+	size_t size = ZA_SIG_REGS_SIZE(sve_vq_from_vl(sme_vl));
+
+	if (system_supports_sme2())
+		size += ZT_SIG_REG_SIZE;
+
+	return size;
+}
+
 /*
  * Return how many bytes of memory are required to store the full SME
  * specific state for task, given task's currently configured vector
@@ -393,15 +425,7 @@ extern void sme_suspend_exit(void);
  */
 static inline size_t sme_state_size(struct task_struct const *task)
 {
-	unsigned int vl = task_get_sme_vl(task);
-	size_t size;
-
-	size = ZA_SIG_REGS_SIZE(sve_vq_from_vl(vl));
-
-	if (system_supports_sme2())
-		size += ZT_SIG_REG_SIZE;
-
-	return size;
+	return __sme_state_size(task_get_sme_vl(task));
 }
 
 #else
@@ -422,6 +446,11 @@ static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; }
 static inline int sme_get_current_vl(void) { return -EINVAL; }
 static inline void sme_suspend_exit(void) { }
 
+static inline size_t __sme_state_size(unsigned int sme_vl)
+{
+	return 0;
+}
+
 static inline size_t sme_state_size(struct task_struct const *task)
 {
 	return 0;
diff --git a/arch/arm64/include/asm/fpu.h b/arch/arm64/include/asm/fpu.h
index 2ae50bdce59b..751e88a96734 100644
--- a/arch/arm64/include/asm/fpu.h
+++ b/arch/arm64/include/asm/fpu.h
@@ -6,10 +6,22 @@
 #ifndef __ASM_FPU_H
 #define __ASM_FPU_H
 
+#include <linux/preempt.h>
 #include <asm/neon.h>
 
 #define kernel_fpu_available()	cpu_has_neon()
-#define kernel_fpu_begin()	kernel_neon_begin()
-#define kernel_fpu_end()	kernel_neon_end()
+
+static inline void kernel_fpu_begin(void)
+{
+	BUG_ON(!in_task());
+	preempt_disable();
+	kernel_neon_begin(NULL);
+}
+
+static inline void kernel_fpu_end(void)
+{
+	kernel_neon_end(NULL);
+	preempt_enable();
+}
 
 #endif /* ! __ASM_FPU_H */
diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h
index 5ccff4de7f09..1621c84f44b3 100644
--- a/arch/arm64/include/asm/ftrace.h
+++ b/arch/arm64/include/asm/ftrace.h
@@ -37,7 +37,7 @@
  */
 #define ARCH_FTRACE_SHIFT_STACK_TRACER 1
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/compat.h>
 
 extern void _mcount(unsigned long);
@@ -52,6 +52,8 @@ extern unsigned long ftrace_graph_call;
 extern void return_to_handler(void);
 
 unsigned long ftrace_call_adjust(unsigned long addr);
+unsigned long arch_ftrace_get_symaddr(unsigned long fentry_ip);
+#define ftrace_get_symaddr(fentry_ip) arch_ftrace_get_symaddr(fentry_ip)
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
 #define HAVE_ARCH_FTRACE_REGS
@@ -129,6 +131,39 @@ ftrace_override_function_with_return(struct ftrace_regs *fregs)
 	arch_ftrace_regs(fregs)->pc = arch_ftrace_regs(fregs)->lr;
 }
 
+static __always_inline unsigned long
+ftrace_regs_get_frame_pointer(const struct ftrace_regs *fregs)
+{
+	return arch_ftrace_regs(fregs)->fp;
+}
+
+static __always_inline unsigned long
+ftrace_regs_get_return_address(const struct ftrace_regs *fregs)
+{
+	return arch_ftrace_regs(fregs)->lr;
+}
+
+static __always_inline struct pt_regs *
+ftrace_partial_regs(const struct ftrace_regs *fregs, struct pt_regs *regs)
+{
+	struct __arch_ftrace_regs *afregs = arch_ftrace_regs(fregs);
+
+	memcpy(regs->regs, afregs->regs, sizeof(afregs->regs));
+	regs->sp = afregs->sp;
+	regs->pc = afregs->pc;
+	regs->regs[29] = afregs->fp;
+	regs->regs[30] = afregs->lr;
+	regs->pstate = PSR_MODE_EL1h;
+	return regs;
+}
+
+#define arch_ftrace_fill_perf_regs(fregs, _regs) do {		\
+		(_regs)->pc = arch_ftrace_regs(fregs)->pc;			\
+		(_regs)->regs[29] = arch_ftrace_regs(fregs)->fp;		\
+		(_regs)->sp = arch_ftrace_regs(fregs)->sp;			\
+		(_regs)->pstate = PSR_MODE_EL1h;		\
+	} while (0)
+
 int ftrace_regs_query_register_offset(const char *name);
 
 int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
@@ -182,27 +217,10 @@ static inline bool arch_syscall_match_sym_name(const char *sym,
 	 */
 	return !strcmp(sym + 8, name);
 }
-#endif /* ifndef __ASSEMBLY__ */
+#endif /* ifndef __ASSEMBLER__ */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-struct fgraph_ret_regs {
-	/* x0 - x7 */
-	unsigned long regs[8];
-
-	unsigned long fp;
-	unsigned long __unused;
-};
-
-static inline unsigned long fgraph_ret_regs_return_value(struct fgraph_ret_regs *ret_regs)
-{
-	return ret_regs->regs[0];
-}
-
-static inline unsigned long fgraph_ret_regs_frame_pointer(struct fgraph_ret_regs *ret_regs)
-{
-	return ret_regs->fp;
-}
 
 void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
 			   unsigned long frame_pointer);
diff --git a/arch/arm64/include/asm/gcs.h b/arch/arm64/include/asm/gcs.h
index f50660603ecf..8fa0707069e8 100644
--- a/arch/arm64/include/asm/gcs.h
+++ b/arch/arm64/include/asm/gcs.h
@@ -21,7 +21,7 @@ static inline void gcsstr(u64 *addr, u64 val)
 	register u64 *_addr __asm__ ("x0") = addr;
 	register long _val __asm__ ("x1") = val;
 
-	/* GCSSTTR x1, x0 */
+	/* GCSSTTR x1, [x0] */
 	asm volatile(
 		".inst 0xd91f1c01\n"
 		:
@@ -58,7 +58,7 @@ static inline u64 gcsss2(void)
 
 static inline bool task_gcs_el0_enabled(struct task_struct *task)
 {
-	return current->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE;
+	return task->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE;
 }
 
 void gcs_set_el0_mode(struct task_struct *task);
@@ -81,6 +81,82 @@ static inline int gcs_check_locked(struct task_struct *task,
 	return 0;
 }
 
+static inline int gcssttr(unsigned long __user *addr, unsigned long val)
+{
+	register unsigned long __user *_addr __asm__ ("x0") = addr;
+	register unsigned long _val __asm__ ("x1") = val;
+	int err = 0;
+
+	/* GCSSTTR x1, [x0] */
+	asm volatile(
+		"1: .inst 0xd91f1c01\n"
+		"2: \n"
+		_ASM_EXTABLE_UACCESS_ERR(1b, 2b, %w0)
+		: "+r" (err)
+		: "rZ" (_val), "r" (_addr)
+		: "memory");
+
+	return err;
+}
+
+static inline void put_user_gcs(unsigned long val, unsigned long __user *addr,
+				int *err)
+{
+	int ret;
+
+	if (!access_ok((char __user *)addr, sizeof(u64))) {
+		*err = -EFAULT;
+		return;
+	}
+
+	uaccess_ttbr0_enable();
+	ret = gcssttr(addr, val);
+	if (ret != 0)
+		*err = ret;
+	uaccess_ttbr0_disable();
+}
+
+static inline void push_user_gcs(unsigned long val, int *err)
+{
+	u64 gcspr = read_sysreg_s(SYS_GCSPR_EL0);
+
+	gcspr -= sizeof(u64);
+	put_user_gcs(val, (unsigned long __user *)gcspr, err);
+	if (!*err)
+		write_sysreg_s(gcspr, SYS_GCSPR_EL0);
+}
+
+/*
+ * Unlike put/push_user_gcs() above, get/pop_user_gsc() doesn't
+ * validate the GCS permission is set on the page being read.  This
+ * differs from how the hardware works when it consumes data stored at
+ * GCSPR. Callers should ensure this is acceptable.
+ */
+static inline u64 get_user_gcs(unsigned long __user *addr, int *err)
+{
+	unsigned long ret;
+	u64 load = 0;
+
+	/* Ensure previous GCS operation are visible before we read the page */
+	gcsb_dsync();
+	ret = copy_from_user(&load, addr, sizeof(load));
+	if (ret != 0)
+		*err = ret;
+	return load;
+}
+
+static inline u64 pop_user_gcs(int *err)
+{
+	u64 gcspr = read_sysreg_s(SYS_GCSPR_EL0);
+	u64 read_val;
+
+	read_val = get_user_gcs((__force unsigned long __user *)gcspr, err);
+	if (!*err)
+		write_sysreg_s(gcspr + sizeof(u64), SYS_GCSPR_EL0);
+
+	return read_val;
+}
+
 #else
 
 static inline bool task_gcs_el0_enabled(struct task_struct *task)
@@ -91,6 +167,10 @@ static inline bool task_gcs_el0_enabled(struct task_struct *task)
 static inline void gcs_set_el0_mode(struct task_struct *task) { }
 static inline void gcs_free(struct task_struct *task) { }
 static inline void gcs_preserve_current_state(void) { }
+static inline void put_user_gcs(unsigned long val, unsigned long __user *addr,
+				int *err) { }
+static inline void push_user_gcs(unsigned long val, int *err) { }
+
 static inline unsigned long gcs_alloc_thread_stack(struct task_struct *tsk,
 						   const struct kernel_clone_args *args)
 {
@@ -101,6 +181,15 @@ static inline int gcs_check_locked(struct task_struct *task,
 {
 	return 0;
 }
+static inline u64 get_user_gcs(unsigned long __user *addr, int *err)
+{
+	*err = -EFAULT;
+	return 0;
+}
+static inline u64 pop_user_gcs(int *err)
+{
+	return 0;
+}
 
 #endif
 
diff --git a/arch/arm64/include/asm/gpr-num.h b/arch/arm64/include/asm/gpr-num.h
index 05da4a7c5788..a114e4f8209b 100644
--- a/arch/arm64/include/asm/gpr-num.h
+++ b/arch/arm64/include/asm/gpr-num.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_GPR_NUM_H
 #define __ASM_GPR_NUM_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 	.irp	num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30
 	.equ	.L__gpr_num_x\num, \num
@@ -11,7 +11,7 @@
 	.equ	.L__gpr_num_xzr, 31
 	.equ	.L__gpr_num_wzr, 31
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 #define __DEFINE_ASM_GPR_NUMS					\
 "	.irp	num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30\n" \
@@ -21,6 +21,6 @@
 "	.equ	.L__gpr_num_xzr, 31\n"				\
 "	.equ	.L__gpr_num_wzr, 31\n"
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_GPR_NUM_H */
diff --git a/arch/arm64/include/asm/hardirq.h b/arch/arm64/include/asm/hardirq.h
index cbfa7b6f2e09..77d6b8c63d4e 100644
--- a/arch/arm64/include/asm/hardirq.h
+++ b/arch/arm64/include/asm/hardirq.h
@@ -41,7 +41,7 @@ do {									\
 									\
 	___hcr = read_sysreg(hcr_el2);					\
 	if (!(___hcr & HCR_TGE)) {					\
-		write_sysreg(___hcr | HCR_TGE, hcr_el2);		\
+		write_sysreg_hcr(___hcr | HCR_TGE);			\
 		isb();							\
 	}								\
 	/*								\
@@ -82,7 +82,7 @@ do {									\
 	 */								\
 	barrier();							\
 	if (!___ctx->cnt && !(___hcr & HCR_TGE))			\
-		write_sysreg(___hcr, hcr_el2);				\
+		write_sysreg_hcr(___hcr);				\
 } while (0)
 
 static inline void ack_bad_irq(unsigned int irq)
diff --git a/arch/arm64/include/asm/hugetlb.h b/arch/arm64/include/asm/hugetlb.h
index c6dff3e69539..44c1f757bfcf 100644
--- a/arch/arm64/include/asm/hugetlb.h
+++ b/arch/arm64/include/asm/hugetlb.h
@@ -21,12 +21,12 @@ extern bool arch_hugetlb_migration_supported(struct hstate *h);
 
 static inline void arch_clear_hugetlb_flags(struct folio *folio)
 {
-	clear_bit(PG_dcache_clean, &folio->flags);
+	clear_bit(PG_dcache_clean, &folio->flags.f);
 
 #ifdef CONFIG_ARM64_MTE
 	if (system_supports_mte()) {
-		clear_bit(PG_mte_tagged, &folio->flags);
-		clear_bit(PG_mte_lock, &folio->flags);
+		clear_bit(PG_mte_tagged, &folio->flags.f);
+		clear_bit(PG_mte_lock, &folio->flags.f);
 	}
 #endif
 }
@@ -42,8 +42,8 @@ extern int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 				      unsigned long addr, pte_t *ptep,
 				      pte_t pte, int dirty);
 #define __HAVE_ARCH_HUGE_PTEP_GET_AND_CLEAR
-extern pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-				     unsigned long addr, pte_t *ptep);
+extern pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+				     pte_t *ptep, unsigned long sz);
 #define __HAVE_ARCH_HUGE_PTEP_SET_WRPROTECT
 extern void huge_ptep_set_wrprotect(struct mm_struct *mm,
 				    unsigned long addr, pte_t *ptep);
@@ -69,6 +69,30 @@ extern void huge_ptep_modify_prot_commit(struct vm_area_struct *vma,
 
 #include <asm-generic/hugetlb.h>
 
+static inline void __flush_hugetlb_tlb_range(struct vm_area_struct *vma,
+					     unsigned long start,
+					     unsigned long end,
+					     unsigned long stride,
+					     bool last_level)
+{
+	switch (stride) {
+#ifndef __PAGETABLE_PMD_FOLDED
+	case PUD_SIZE:
+		__flush_tlb_range(vma, start, end, PUD_SIZE, last_level, 1);
+		break;
+#endif
+	case CONT_PMD_SIZE:
+	case PMD_SIZE:
+		__flush_tlb_range(vma, start, end, PMD_SIZE, last_level, 2);
+		break;
+	case CONT_PTE_SIZE:
+		__flush_tlb_range(vma, start, end, PAGE_SIZE, last_level, 3);
+		break;
+	default:
+		__flush_tlb_range(vma, start, end, PAGE_SIZE, last_level, TLBI_TTL_UNKNOWN);
+	}
+}
+
 #define __HAVE_ARCH_FLUSH_HUGETLB_TLB_RANGE
 static inline void flush_hugetlb_tlb_range(struct vm_area_struct *vma,
 					   unsigned long start,
@@ -76,12 +100,7 @@ static inline void flush_hugetlb_tlb_range(struct vm_area_struct *vma,
 {
 	unsigned long stride = huge_page_size(hstate_vma(vma));
 
-	if (stride == PMD_SIZE)
-		__flush_tlb_range(vma, start, end, stride, false, 2);
-	else if (stride == PUD_SIZE)
-		__flush_tlb_range(vma, start, end, stride, false, 1);
-	else
-		__flush_tlb_range(vma, start, end, PAGE_SIZE, false, 0);
+	__flush_hugetlb_tlb_range(vma, start, end, stride, false);
 }
 
 #endif /* __ASM_HUGETLB_H */
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index 2b6c61c608e2..1f63814ae6c4 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -46,7 +46,7 @@
 #define COMPAT_HWCAP2_SB	(1 << 5)
 #define COMPAT_HWCAP2_SSBS	(1 << 6)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/log2.h>
 
 /*
@@ -93,6 +93,21 @@
 #define KERNEL_HWCAP_PACA		__khwcap_feature(PACA)
 #define KERNEL_HWCAP_PACG		__khwcap_feature(PACG)
 #define KERNEL_HWCAP_GCS		__khwcap_feature(GCS)
+#define KERNEL_HWCAP_CMPBR		__khwcap_feature(CMPBR)
+#define KERNEL_HWCAP_FPRCVT		__khwcap_feature(FPRCVT)
+#define KERNEL_HWCAP_F8MM8		__khwcap_feature(F8MM8)
+#define KERNEL_HWCAP_F8MM4		__khwcap_feature(F8MM4)
+#define KERNEL_HWCAP_SVE_F16MM		__khwcap_feature(SVE_F16MM)
+#define KERNEL_HWCAP_SVE_ELTPERM	__khwcap_feature(SVE_ELTPERM)
+#define KERNEL_HWCAP_SVE_AES2		__khwcap_feature(SVE_AES2)
+#define KERNEL_HWCAP_SVE_BFSCALE	__khwcap_feature(SVE_BFSCALE)
+#define KERNEL_HWCAP_SVE2P2		__khwcap_feature(SVE2P2)
+#define KERNEL_HWCAP_SME2P2		__khwcap_feature(SME2P2)
+#define KERNEL_HWCAP_SME_SBITPERM	__khwcap_feature(SME_SBITPERM)
+#define KERNEL_HWCAP_SME_AES		__khwcap_feature(SME_AES)
+#define KERNEL_HWCAP_SME_SFEXPA		__khwcap_feature(SME_SFEXPA)
+#define KERNEL_HWCAP_SME_STMOP		__khwcap_feature(SME_STMOP)
+#define KERNEL_HWCAP_SME_SMOP4		__khwcap_feature(SME_SMOP4)
 
 #define __khwcap2_feature(x)		(const_ilog2(HWCAP2_ ## x) + 64)
 #define KERNEL_HWCAP_DCPODP		__khwcap2_feature(DCPODP)
@@ -161,6 +176,9 @@
 #define KERNEL_HWCAP_POE		__khwcap2_feature(POE)
 
 #define __khwcap3_feature(x)		(const_ilog2(HWCAP3_ ## x) + 128)
+#define KERNEL_HWCAP_MTE_FAR		__khwcap3_feature(MTE_FAR)
+#define KERNEL_HWCAP_MTE_STORE_ONLY	__khwcap3_feature(MTE_STORE_ONLY)
+#define KERNEL_HWCAP_LSFE		__khwcap3_feature(LSFE)
 
 /*
  * This yields a mask that user programs can use to figure out what
diff --git a/arch/arm64/include/asm/hyperv-tlfs.h b/arch/arm64/include/asm/hyperv-tlfs.h
deleted file mode 100644
index bc30aadedfe9..000000000000
--- a/arch/arm64/include/asm/hyperv-tlfs.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-/*
- * This file contains definitions from the Hyper-V Hypervisor Top-Level
- * Functional Specification (TLFS):
- * https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
- *
- * Copyright (C) 2021, Microsoft, Inc.
- *
- * Author : Michael Kelley <mikelley@microsoft.com>
- */
-
-#ifndef _ASM_HYPERV_TLFS_H
-#define _ASM_HYPERV_TLFS_H
-
-#include <linux/types.h>
-
-/*
- * All data structures defined in the TLFS that are shared between Hyper-V
- * and a guest VM use Little Endian byte ordering.  This matches the default
- * byte ordering of Linux running on ARM64, so no special handling is required.
- */
-
-/*
- * Group C Features. See the asm-generic version of hyperv-tlfs.h
- * for a description of Feature Groups.
- */
-
-/* Crash MSRs available */
-#define HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE	BIT(8)
-
-/* STIMER direct mode is available */
-#define HV_STIMER_DIRECT_MODE_AVAILABLE		BIT(13)
-
-/*
- * To support arch-generic code calling hv_set/get_register:
- * - On x86, HV_MSR_ indicates an MSR accessed via rdmsrl/wrmsrl
- * - On ARM, HV_MSR_ indicates a VP register accessed via hypercall
- */
-#define HV_MSR_CRASH_P0		(HV_REGISTER_GUEST_CRASH_P0)
-#define HV_MSR_CRASH_P1		(HV_REGISTER_GUEST_CRASH_P1)
-#define HV_MSR_CRASH_P2		(HV_REGISTER_GUEST_CRASH_P2)
-#define HV_MSR_CRASH_P3		(HV_REGISTER_GUEST_CRASH_P3)
-#define HV_MSR_CRASH_P4		(HV_REGISTER_GUEST_CRASH_P4)
-#define HV_MSR_CRASH_CTL	(HV_REGISTER_GUEST_CRASH_CTL)
-
-#define HV_MSR_VP_INDEX		(HV_REGISTER_VP_INDEX)
-#define HV_MSR_TIME_REF_COUNT	(HV_REGISTER_TIME_REF_COUNT)
-#define HV_MSR_REFERENCE_TSC	(HV_REGISTER_REFERENCE_TSC)
-
-#define HV_MSR_SINT0		(HV_REGISTER_SINT0)
-#define HV_MSR_SCONTROL		(HV_REGISTER_SCONTROL)
-#define HV_MSR_SIEFP		(HV_REGISTER_SIEFP)
-#define HV_MSR_SIMP		(HV_REGISTER_SIMP)
-#define HV_MSR_EOM		(HV_REGISTER_EOM)
-
-#define HV_MSR_STIMER0_CONFIG	(HV_REGISTER_STIMER0_CONFIG)
-#define HV_MSR_STIMER0_COUNT	(HV_REGISTER_STIMER0_COUNT)
-
-union hv_msi_entry {
-	u64 as_uint64[2];
-	struct {
-		u64 address;
-		u32 data;
-		u32 reserved;
-	} __packed;
-};
-
-#include <asm-generic/hyperv-tlfs.h>
-
-#endif
diff --git a/arch/arm64/include/asm/hypervisor.h b/arch/arm64/include/asm/hypervisor.h
index 409e239834d1..a12fd897c877 100644
--- a/arch/arm64/include/asm/hypervisor.h
+++ b/arch/arm64/include/asm/hypervisor.h
@@ -6,6 +6,7 @@
 
 void kvm_init_hyp_services(void);
 bool kvm_arm_hyp_service_available(u32 func_id);
+void kvm_arm_target_impl_cpu_init(void);
 
 #ifdef CONFIG_ARM_PKVM_GUEST
 void pkvm_init_hyp_services(void);
diff --git a/arch/arm64/include/asm/image.h b/arch/arm64/include/asm/image.h
index c09cf942dc92..9ba85173f857 100644
--- a/arch/arm64/include/asm/image.h
+++ b/arch/arm64/include/asm/image.h
@@ -20,7 +20,7 @@
 #define ARM64_IMAGE_FLAG_PAGE_SIZE_64K		3
 #define ARM64_IMAGE_FLAG_PHYS_BASE		1
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define arm64_image_flag_field(flags, field) \
 				(((flags) >> field##_SHIFT) & field##_MASK)
@@ -54,6 +54,6 @@ struct arm64_image_header {
 	__le32 res5;
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_IMAGE_H */
diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h
index e390c432f546..e1d30ba99d01 100644
--- a/arch/arm64/include/asm/insn.h
+++ b/arch/arm64/include/asm/insn.h
@@ -12,7 +12,7 @@
 
 #include <asm/insn-def.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 enum aarch64_insn_hint_cr_op {
 	AARCH64_INSN_HINT_NOP	= 0x0 << 5,
@@ -188,8 +188,10 @@ enum aarch64_insn_ldst_type {
 	AARCH64_INSN_LDST_STORE_PAIR_PRE_INDEX,
 	AARCH64_INSN_LDST_LOAD_PAIR_POST_INDEX,
 	AARCH64_INSN_LDST_STORE_PAIR_POST_INDEX,
+	AARCH64_INSN_LDST_LOAD_ACQ,
 	AARCH64_INSN_LDST_LOAD_EX,
 	AARCH64_INSN_LDST_LOAD_ACQ_EX,
+	AARCH64_INSN_LDST_STORE_REL,
 	AARCH64_INSN_LDST_STORE_EX,
 	AARCH64_INSN_LDST_STORE_REL_EX,
 	AARCH64_INSN_LDST_SIGNED_LOAD_IMM_OFFSET,
@@ -351,8 +353,10 @@ __AARCH64_INSN_FUNCS(ldr_imm,	0x3FC00000, 0x39400000)
 __AARCH64_INSN_FUNCS(ldr_lit,	0xBF000000, 0x18000000)
 __AARCH64_INSN_FUNCS(ldrsw_lit,	0xFF000000, 0x98000000)
 __AARCH64_INSN_FUNCS(exclusive,	0x3F800000, 0x08000000)
-__AARCH64_INSN_FUNCS(load_ex,	0x3F400000, 0x08400000)
-__AARCH64_INSN_FUNCS(store_ex,	0x3F400000, 0x08000000)
+__AARCH64_INSN_FUNCS(load_acq,  0x3FDFFC00, 0x08DFFC00)
+__AARCH64_INSN_FUNCS(store_rel, 0x3FDFFC00, 0x089FFC00)
+__AARCH64_INSN_FUNCS(load_ex,	0x3FC00000, 0x08400000)
+__AARCH64_INSN_FUNCS(store_ex,	0x3FC00000, 0x08000000)
 __AARCH64_INSN_FUNCS(mops,	0x3B200C00, 0x19000400)
 __AARCH64_INSN_FUNCS(stp,	0x7FC00000, 0x29000000)
 __AARCH64_INSN_FUNCS(ldp,	0x7FC00000, 0x29400000)
@@ -602,6 +606,10 @@ u32 aarch64_insn_gen_load_store_pair(enum aarch64_insn_register reg1,
 				     int offset,
 				     enum aarch64_insn_variant variant,
 				     enum aarch64_insn_ldst_type type);
+u32 aarch64_insn_gen_load_acq_store_rel(enum aarch64_insn_register reg,
+					enum aarch64_insn_register base,
+					enum aarch64_insn_size_type size,
+					enum aarch64_insn_ldst_type type);
 u32 aarch64_insn_gen_load_store_ex(enum aarch64_insn_register reg,
 				   enum aarch64_insn_register base,
 				   enum aarch64_insn_register state,
@@ -698,6 +706,7 @@ u32 aarch64_insn_gen_cas(enum aarch64_insn_register result,
 }
 #endif
 u32 aarch64_insn_gen_dmb(enum aarch64_insn_mb_type type);
+u32 aarch64_insn_gen_dsb(enum aarch64_insn_mb_type type);
 u32 aarch64_insn_gen_mrs(enum aarch64_insn_register result,
 			 enum aarch64_insn_system_register sysreg);
 
@@ -721,6 +730,6 @@ u32 aarch32_insn_mcr_extract_crm(u32 insn);
 typedef bool (pstate_check_t)(unsigned long);
 extern pstate_check_t * const aarch32_opcode_cond_checks[16];
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif	/* __ASM_INSN_H */
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 76ebbdc6ffdd..83e03abbb2ca 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -270,9 +270,13 @@ int arm64_ioremap_prot_hook_register(const ioremap_prot_hook_t hook);
 #define _PAGE_IOREMAP PROT_DEVICE_nGnRE
 
 #define ioremap_wc(addr, size)	\
-	ioremap_prot((addr), (size), PROT_NORMAL_NC)
+	ioremap_prot((addr), (size), __pgprot(PROT_NORMAL_NC))
 #define ioremap_np(addr, size)	\
-	ioremap_prot((addr), (size), PROT_DEVICE_nGnRnE)
+	ioremap_prot((addr), (size), __pgprot(PROT_DEVICE_nGnRnE))
+
+
+#define ioremap_encrypted(addr, size)	\
+	ioremap_prot((addr), (size), PAGE_KERNEL)
 
 /*
  * io{read,write}{16,32,64}be() macros
@@ -293,7 +297,7 @@ static inline void __iomem *ioremap_cache(phys_addr_t addr, size_t size)
 	if (pfn_is_map_memory(__phys_to_pfn(addr)))
 		return (void __iomem *)__phys_to_virt(addr);
 
-	return ioremap_prot(addr, size, PROT_NORMAL);
+	return ioremap_prot(addr, size, __pgprot(PROT_NORMAL));
 }
 
 /*
@@ -311,7 +315,7 @@ extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
 static inline bool arm64_is_protected_mmio(phys_addr_t phys_addr, size_t size)
 {
 	if (unlikely(is_realm_world()))
-		return __arm64_is_protected_mmio(phys_addr, size);
+		return arm64_rsi_is_protected(phys_addr, size);
 	return false;
 }
 
diff --git a/arch/arm64/include/asm/jump_label.h b/arch/arm64/include/asm/jump_label.h
index 424ed421cd97..0cb211d3607d 100644
--- a/arch/arm64/include/asm/jump_label.h
+++ b/arch/arm64/include/asm/jump_label.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_JUMP_LABEL_H
 #define __ASM_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <asm/insn.h>
@@ -58,5 +58,5 @@ l_yes:
 	return true;
 }
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif	/* __ASM_JUMP_LABEL_H */
diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h
index e1b57c13f8a4..b167e9d3da91 100644
--- a/arch/arm64/include/asm/kasan.h
+++ b/arch/arm64/include/asm/kasan.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_KASAN_H
 #define __ASM_KASAN_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/linkage.h>
 #include <asm/memory.h>
diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h
index fd5a08450b12..74a4f738c5f5 100644
--- a/arch/arm64/include/asm/kernel-pgtable.h
+++ b/arch/arm64/include/asm/kernel-pgtable.h
@@ -45,11 +45,11 @@
 #define SPAN_NR_ENTRIES(vstart, vend, shift) \
 	((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1)
 
-#define EARLY_ENTRIES(vstart, vend, shift, add) \
-	(SPAN_NR_ENTRIES(vstart, vend, shift) + (add))
+#define EARLY_ENTRIES(lvl, vstart, vend) \
+	SPAN_NR_ENTRIES(vstart, vend, SWAPPER_BLOCK_SHIFT + lvl * PTDESC_TABLE_SHIFT)
 
-#define EARLY_LEVEL(lvl, lvls, vstart, vend, add)	\
-	(lvls > lvl ? EARLY_ENTRIES(vstart, vend, SWAPPER_BLOCK_SHIFT + lvl * (PAGE_SHIFT - 3), add) : 0)
+#define EARLY_LEVEL(lvl, lvls, vstart, vend, add) \
+	((lvls) > (lvl) ? EARLY_ENTRIES(lvl, vstart, vend) + (add) : 0)
 
 #define EARLY_PAGES(lvls, vstart, vend, add) (1 	/* PGDIR page */				\
 	+ EARLY_LEVEL(3, (lvls), (vstart), (vend), add) /* each entry needs a next level page table */	\
@@ -58,7 +58,7 @@
 #define INIT_DIR_SIZE (PAGE_SIZE * (EARLY_PAGES(SWAPPER_PGTABLE_LEVELS, KIMAGE_VADDR, _end, EXTRA_PAGE) \
 				    + EARLY_SEGMENT_EXTRA_PAGES))
 
-#define INIT_IDMAP_DIR_PAGES	(EARLY_PAGES(INIT_IDMAP_PGTABLE_LEVELS, KIMAGE_VADDR, _end, 1))
+#define INIT_IDMAP_DIR_PAGES	(EARLY_PAGES(INIT_IDMAP_PGTABLE_LEVELS, KIMAGE_VADDR, kimage_limit, 1))
 #define INIT_IDMAP_DIR_SIZE	((INIT_IDMAP_DIR_PAGES + EARLY_IDMAP_EXTRA_PAGES) * PAGE_SIZE)
 
 #define INIT_IDMAP_FDT_PAGES	(EARLY_PAGES(INIT_IDMAP_PGTABLE_LEVELS, 0UL, UL(MAX_FDT_SIZE), 1) - 1)
diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h
index 4d9cc7a76d9c..892e5bebda95 100644
--- a/arch/arm64/include/asm/kexec.h
+++ b/arch/arm64/include/asm/kexec.h
@@ -25,7 +25,7 @@
 
 #define KEXEC_ARCH KEXEC_ARCH_AARCH64
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /**
  * crash_setup_regs() - save registers for the panic kernel
@@ -130,6 +130,6 @@ extern int load_other_segments(struct kimage *image,
 		char *cmdline);
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arm64/include/asm/kfence.h b/arch/arm64/include/asm/kfence.h
index a81937fae9f6..21dbc9dda747 100644
--- a/arch/arm64/include/asm/kfence.h
+++ b/arch/arm64/include/asm/kfence.h
@@ -10,8 +10,6 @@
 
 #include <asm/set_memory.h>
 
-static inline bool arch_kfence_init_pool(void) { return true; }
-
 static inline bool kfence_protect_page(unsigned long addr, bool protect)
 {
 	set_memory_valid(addr, 1, !protect);
@@ -25,6 +23,7 @@ static inline bool arm64_kfence_can_set_direct_map(void)
 {
 	return !kfence_early_init;
 }
+bool arch_kfence_init_pool(void);
 #else /* CONFIG_KFENCE */
 static inline bool arm64_kfence_can_set_direct_map(void) { return false; }
 #endif /* CONFIG_KFENCE */
diff --git a/arch/arm64/include/asm/kgdb.h b/arch/arm64/include/asm/kgdb.h
index 21fc85e9d2be..67ef1c5532ae 100644
--- a/arch/arm64/include/asm/kgdb.h
+++ b/arch/arm64/include/asm/kgdb.h
@@ -14,7 +14,7 @@
 #include <linux/ptrace.h>
 #include <asm/debug-monitors.h>
 
-#ifndef	__ASSEMBLY__
+#ifndef	__ASSEMBLER__
 
 static inline void arch_kgdb_breakpoint(void)
 {
@@ -24,7 +24,19 @@ static inline void arch_kgdb_breakpoint(void)
 extern void kgdb_handle_bus_error(void);
 extern int kgdb_fault_expected;
 
-#endif /* !__ASSEMBLY__ */
+int kgdb_brk_handler(struct pt_regs *regs, unsigned long esr);
+int kgdb_compiled_brk_handler(struct pt_regs *regs, unsigned long esr);
+#ifdef CONFIG_KGDB
+int kgdb_single_step_handler(struct pt_regs *regs, unsigned long esr);
+#else
+static inline int kgdb_single_step_handler(struct pt_regs *regs,
+	unsigned long esr)
+{
+	return DBG_HOOK_ERROR;
+}
+#endif
+
+#endif /* !__ASSEMBLER__ */
 
 /*
  * gdb remote procotol (well most versions of it) expects the following
diff --git a/arch/arm64/include/asm/kprobes.h b/arch/arm64/include/asm/kprobes.h
index be7a3680dadf..f2782560647b 100644
--- a/arch/arm64/include/asm/kprobes.h
+++ b/arch/arm64/include/asm/kprobes.h
@@ -41,4 +41,12 @@ void __kretprobe_trampoline(void);
 void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
 
 #endif /* CONFIG_KPROBES */
+
+int __kprobes kprobe_brk_handler(struct pt_regs *regs,
+				 unsigned long esr);
+int __kprobes kprobe_ss_brk_handler(struct pt_regs *regs,
+				 unsigned long esr);
+int __kprobes kretprobe_brk_handler(struct pt_regs *regs,
+				 unsigned long esr);
+
 #endif /* _ARM_KPROBES_H */
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index 3e0f0de1d2da..e500600e4b9b 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -12,67 +12,70 @@
 #include <asm/sysreg.h>
 #include <asm/types.h>
 
-/* Hyp Configuration Register (HCR) bits */
-
-#define HCR_TID5	(UL(1) << 58)
-#define HCR_DCT		(UL(1) << 57)
-#define HCR_ATA_SHIFT	56
-#define HCR_ATA		(UL(1) << HCR_ATA_SHIFT)
-#define HCR_TTLBOS	(UL(1) << 55)
-#define HCR_TTLBIS	(UL(1) << 54)
-#define HCR_ENSCXT	(UL(1) << 53)
-#define HCR_TOCU	(UL(1) << 52)
-#define HCR_AMVOFFEN	(UL(1) << 51)
-#define HCR_TICAB	(UL(1) << 50)
-#define HCR_TID4	(UL(1) << 49)
-#define HCR_FIEN	(UL(1) << 47)
-#define HCR_FWB		(UL(1) << 46)
-#define HCR_NV2		(UL(1) << 45)
-#define HCR_AT		(UL(1) << 44)
-#define HCR_NV1		(UL(1) << 43)
-#define HCR_NV		(UL(1) << 42)
-#define HCR_API		(UL(1) << 41)
-#define HCR_APK		(UL(1) << 40)
-#define HCR_TEA		(UL(1) << 37)
-#define HCR_TERR	(UL(1) << 36)
-#define HCR_TLOR	(UL(1) << 35)
-#define HCR_E2H		(UL(1) << 34)
-#define HCR_ID		(UL(1) << 33)
-#define HCR_CD		(UL(1) << 32)
-#define HCR_RW_SHIFT	31
-#define HCR_RW		(UL(1) << HCR_RW_SHIFT)
-#define HCR_TRVM	(UL(1) << 30)
-#define HCR_HCD		(UL(1) << 29)
-#define HCR_TDZ		(UL(1) << 28)
-#define HCR_TGE		(UL(1) << 27)
-#define HCR_TVM		(UL(1) << 26)
-#define HCR_TTLB	(UL(1) << 25)
-#define HCR_TPU		(UL(1) << 24)
-#define HCR_TPC		(UL(1) << 23) /* HCR_TPCP if FEAT_DPB */
-#define HCR_TSW		(UL(1) << 22)
-#define HCR_TACR	(UL(1) << 21)
-#define HCR_TIDCP	(UL(1) << 20)
-#define HCR_TSC		(UL(1) << 19)
-#define HCR_TID3	(UL(1) << 18)
-#define HCR_TID2	(UL(1) << 17)
-#define HCR_TID1	(UL(1) << 16)
-#define HCR_TID0	(UL(1) << 15)
-#define HCR_TWE		(UL(1) << 14)
-#define HCR_TWI		(UL(1) << 13)
-#define HCR_DC		(UL(1) << 12)
-#define HCR_BSU		(3 << 10)
-#define HCR_BSU_IS	(UL(1) << 10)
-#define HCR_FB		(UL(1) << 9)
-#define HCR_VSE		(UL(1) << 8)
-#define HCR_VI		(UL(1) << 7)
-#define HCR_VF		(UL(1) << 6)
-#define HCR_AMO		(UL(1) << 5)
-#define HCR_IMO		(UL(1) << 4)
-#define HCR_FMO		(UL(1) << 3)
-#define HCR_PTW		(UL(1) << 2)
-#define HCR_SWIO	(UL(1) << 1)
-#define HCR_VM		(UL(1) << 0)
-#define HCR_RES0	((UL(1) << 48) | (UL(1) << 39))
+/*
+ * Because I'm terribly lazy and that repainting the whole of the KVM
+ * code with the proper names is a pain, use a helper to map the names
+ * inherited from AArch32 with the new fancy nomenclature. One day...
+ */
+#define	__HCR(x)	HCR_EL2_##x
+
+#define HCR_TID5	__HCR(TID5)
+#define HCR_DCT		__HCR(DCT)
+#define HCR_ATA_SHIFT	__HCR(ATA_SHIFT)
+#define HCR_ATA		__HCR(ATA)
+#define HCR_TTLBOS	__HCR(TTLBOS)
+#define HCR_TTLBIS	__HCR(TTLBIS)
+#define HCR_ENSCXT	__HCR(EnSCXT)
+#define HCR_TOCU	__HCR(TOCU)
+#define HCR_AMVOFFEN	__HCR(AMVOFFEN)
+#define HCR_TICAB	__HCR(TICAB)
+#define HCR_TID4	__HCR(TID4)
+#define HCR_FIEN	__HCR(FIEN)
+#define HCR_FWB		__HCR(FWB)
+#define HCR_NV2		__HCR(NV2)
+#define HCR_AT		__HCR(AT)
+#define HCR_NV1		__HCR(NV1)
+#define HCR_NV		__HCR(NV)
+#define HCR_API		__HCR(API)
+#define HCR_APK		__HCR(APK)
+#define HCR_TEA		__HCR(TEA)
+#define HCR_TERR	__HCR(TERR)
+#define HCR_TLOR	__HCR(TLOR)
+#define HCR_E2H		__HCR(E2H)
+#define HCR_ID		__HCR(ID)
+#define HCR_CD		__HCR(CD)
+#define HCR_RW		__HCR(RW)
+#define HCR_TRVM	__HCR(TRVM)
+#define HCR_HCD		__HCR(HCD)
+#define HCR_TDZ		__HCR(TDZ)
+#define HCR_TGE		__HCR(TGE)
+#define HCR_TVM		__HCR(TVM)
+#define HCR_TTLB	__HCR(TTLB)
+#define HCR_TPU		__HCR(TPU)
+#define HCR_TPC		__HCR(TPCP)
+#define HCR_TSW		__HCR(TSW)
+#define HCR_TACR	__HCR(TACR)
+#define HCR_TIDCP	__HCR(TIDCP)
+#define HCR_TSC		__HCR(TSC)
+#define HCR_TID3	__HCR(TID3)
+#define HCR_TID2	__HCR(TID2)
+#define HCR_TID1	__HCR(TID1)
+#define HCR_TID0	__HCR(TID0)
+#define HCR_TWE		__HCR(TWE)
+#define HCR_TWI		__HCR(TWI)
+#define HCR_DC		__HCR(DC)
+#define HCR_BSU		__HCR(BSU)
+#define HCR_BSU_IS	__HCR(BSU_IS)
+#define HCR_FB		__HCR(FB)
+#define HCR_VSE		__HCR(VSE)
+#define HCR_VI		__HCR(VI)
+#define HCR_VF		__HCR(VF)
+#define HCR_AMO		__HCR(AMO)
+#define HCR_IMO		__HCR(IMO)
+#define HCR_FMO		__HCR(FMO)
+#define HCR_PTW		__HCR(PTW)
+#define HCR_SWIO	__HCR(SWIO)
+#define HCR_VM		__HCR(VM)
 
 /*
  * The bits we set in HCR:
@@ -92,23 +95,23 @@
  * SWIO:	Turn set/way invalidates into set/way clean+invalidate
  * PTW:		Take a stage2 fault if a stage1 walk steps in device memory
  * TID3:	Trap EL1 reads of group 3 ID registers
- * TID2:	Trap CTR_EL0, CCSIDR2_EL1, CLIDR_EL1, and CSSELR_EL1
+ * TID1:	Trap REVIDR_EL1, AIDR_EL1, and SMIDR_EL1
  */
 #define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \
 			 HCR_BSU_IS | HCR_FB | HCR_TACR | \
 			 HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \
-			 HCR_FMO | HCR_IMO | HCR_PTW | HCR_TID3)
+			 HCR_FMO | HCR_IMO | HCR_PTW | HCR_TID3 | HCR_TID1)
 #define HCR_HOST_NVHE_FLAGS (HCR_RW | HCR_API | HCR_APK | HCR_ATA)
 #define HCR_HOST_NVHE_PROTECTED_FLAGS (HCR_HOST_NVHE_FLAGS | HCR_TSC)
-#define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
+#define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H | HCR_AMO | HCR_IMO | HCR_FMO)
 
-#define HCRX_HOST_FLAGS (HCRX_EL2_MSCEn | HCRX_EL2_TCR2En | HCRX_EL2_EnFPM)
 #define MPAMHCR_HOST_FLAGS	0
 
 /* TCR_EL2 Registers bits */
 #define TCR_EL2_DS		(1UL << 32)
 #define TCR_EL2_RES1		((1U << 31) | (1 << 23))
 #define TCR_EL2_HPD		(1 << 24)
+#define TCR_EL2_HA		(1 << 21)
 #define TCR_EL2_TBI		(1 << 20)
 #define TCR_EL2_PS_SHIFT	16
 #define TCR_EL2_PS_MASK		(7 << TCR_EL2_PS_SHIFT)
@@ -119,7 +122,7 @@
 #define TCR_EL2_IRGN0_MASK	TCR_IRGN0_MASK
 #define TCR_EL2_T0SZ_MASK	0x3f
 #define TCR_EL2_MASK	(TCR_EL2_TG0_MASK | TCR_EL2_SH0_MASK | \
-			 TCR_EL2_ORGN0_MASK | TCR_EL2_IRGN0_MASK | TCR_EL2_T0SZ_MASK)
+			 TCR_EL2_ORGN0_MASK | TCR_EL2_IRGN0_MASK)
 
 /* VTCR_EL2 Registers bits */
 #define VTCR_EL2_DS		TCR_EL2_DS
@@ -300,7 +303,7 @@
 #define CPTR_EL2_TSM	(1 << 12)
 #define CPTR_EL2_TFP	(1 << CPTR_EL2_TFP_SHIFT)
 #define CPTR_EL2_TZ	(1 << 8)
-#define CPTR_NVHE_EL2_RES1	0x000032ff /* known RES1 bits in CPTR_EL2 (nVHE) */
+#define CPTR_NVHE_EL2_RES1	(BIT(13) | BIT(9) | GENMASK(7, 0))
 #define CPTR_NVHE_EL2_RES0	(GENMASK(63, 32) |	\
 				 GENMASK(29, 21) |	\
 				 GENMASK(19, 14) |	\
@@ -313,56 +316,19 @@
 				 GENMASK(15, 0))
 
 /*
- * FGT register definitions
- *
- * RES0 and polarity masks as of DDI0487J.a, to be updated as needed.
- * We're not using the generated masks as they are usually ahead of
- * the published ARM ARM, which we use as a reference.
- *
- * Once we get to a point where the two describe the same thing, we'll
- * merge the definitions. One day.
- */
-#define __HFGRTR_EL2_RES0	HFGxTR_EL2_RES0
-#define __HFGRTR_EL2_MASK	GENMASK(49, 0)
-#define __HFGRTR_EL2_nMASK	~(__HFGRTR_EL2_RES0 | __HFGRTR_EL2_MASK)
-
-/*
- * The HFGWTR bits are a subset of HFGRTR bits. To ensure we don't miss any
- * future additions, define __HFGWTR* macros relative to __HFGRTR* ones.
+ * Polarity masks for HCRX_EL2, limited to the bits that we know about
+ * at this point in time. It doesn't mean that we actually *handle*
+ * them, but that at least those that are not advertised to a guest
+ * will be RES0 for that guest.
  */
-#define __HFGRTR_ONLY_MASK	(BIT(46) | BIT(42) | BIT(40) | BIT(28) | \
-				 GENMASK(26, 25) | BIT(21) | BIT(18) | \
-				 GENMASK(15, 14) | GENMASK(10, 9) | BIT(2))
-#define __HFGWTR_EL2_RES0	(__HFGRTR_EL2_RES0 | __HFGRTR_ONLY_MASK)
-#define __HFGWTR_EL2_MASK	(__HFGRTR_EL2_MASK & ~__HFGRTR_ONLY_MASK)
-#define __HFGWTR_EL2_nMASK	~(__HFGWTR_EL2_RES0 | __HFGWTR_EL2_MASK)
-
-#define __HFGITR_EL2_RES0	HFGITR_EL2_RES0
-#define __HFGITR_EL2_MASK	(BIT(62) | BIT(60) | GENMASK(54, 0))
-#define __HFGITR_EL2_nMASK	~(__HFGITR_EL2_RES0 | __HFGITR_EL2_MASK)
-
-#define __HDFGRTR_EL2_RES0	HDFGRTR_EL2_RES0
-#define __HDFGRTR_EL2_MASK	(BIT(63) | GENMASK(58, 50) | GENMASK(48, 43) | \
-				 GENMASK(41, 40) | GENMASK(37, 22) | \
-				 GENMASK(19, 9) | GENMASK(7, 0))
-#define __HDFGRTR_EL2_nMASK	~(__HDFGRTR_EL2_RES0 | __HDFGRTR_EL2_MASK)
-
-#define __HDFGWTR_EL2_RES0	HDFGWTR_EL2_RES0
-#define __HDFGWTR_EL2_MASK	(GENMASK(57, 52) | GENMASK(50, 48) | \
-				 GENMASK(46, 44) | GENMASK(42, 41) | \
-				 GENMASK(37, 35) | GENMASK(33, 31) | \
-				 GENMASK(29, 23) | GENMASK(21, 10) | \
-				 GENMASK(8, 7) | GENMASK(5, 0))
-#define __HDFGWTR_EL2_nMASK	~(__HDFGWTR_EL2_RES0 | __HDFGWTR_EL2_MASK)
-
-#define __HAFGRTR_EL2_RES0	HAFGRTR_EL2_RES0
-#define __HAFGRTR_EL2_MASK	(GENMASK(49, 17) | GENMASK(4, 0))
-#define __HAFGRTR_EL2_nMASK	~(__HAFGRTR_EL2_RES0 | __HAFGRTR_EL2_MASK)
-
-/* Similar definitions for HCRX_EL2 */
-#define __HCRX_EL2_RES0         HCRX_EL2_RES0
-#define __HCRX_EL2_MASK		(BIT(6))
-#define __HCRX_EL2_nMASK	~(__HCRX_EL2_RES0 | __HCRX_EL2_MASK)
+#define __HCRX_EL2_MASK		(BIT_ULL(6))
+#define __HCRX_EL2_nMASK	(GENMASK_ULL(24, 14) | \
+				 GENMASK_ULL(11, 7)  | \
+				 GENMASK_ULL(5, 0))
+#define __HCRX_EL2_RES0		~(__HCRX_EL2_nMASK | __HCRX_EL2_MASK)
+#define __HCRX_EL2_RES1		~(__HCRX_EL2_nMASK | \
+				  __HCRX_EL2_MASK  | \
+				  __HCRX_EL2_RES0)
 
 /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
 #define HPFAR_MASK	(~UL(0xf))
@@ -391,8 +357,6 @@
 	ECN(SOFTSTP_CUR), ECN(WATCHPT_LOW), ECN(WATCHPT_CUR), \
 	ECN(BKPT32), ECN(VECTOR32), ECN(BRK64), ECN(ERET)
 
-#define CPACR_EL1_TTA		(1 << 28)
-
 #define kvm_mode_names				\
 	{ PSR_MODE_EL0t,	"EL0t" },	\
 	{ PSR_MODE_EL1t,	"EL1t" },	\
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index ca2590344313..a1ad12c72ebf 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -46,15 +46,14 @@
 
 #define __KVM_HOST_SMCCC_FUNC___kvm_hyp_init			0
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/mm.h>
 
 enum __kvm_host_smccc_func {
 	/* Hypercalls available only prior to pKVM finalisation */
 	/* __KVM_HOST_SMCCC_FUNC___kvm_hyp_init */
-	__KVM_HOST_SMCCC_FUNC___kvm_get_mdcr_el2 = __KVM_HOST_SMCCC_FUNC___kvm_hyp_init + 1,
-	__KVM_HOST_SMCCC_FUNC___pkvm_init,
+	__KVM_HOST_SMCCC_FUNC___pkvm_init = __KVM_HOST_SMCCC_FUNC___kvm_hyp_init + 1,
 	__KVM_HOST_SMCCC_FUNC___pkvm_create_private_mapping,
 	__KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector,
 	__KVM_HOST_SMCCC_FUNC___kvm_enable_ssbs,
@@ -65,6 +64,12 @@ enum __kvm_host_smccc_func {
 	/* Hypercalls available after pKVM finalisation */
 	__KVM_HOST_SMCCC_FUNC___pkvm_host_share_hyp,
 	__KVM_HOST_SMCCC_FUNC___pkvm_host_unshare_hyp,
+	__KVM_HOST_SMCCC_FUNC___pkvm_host_share_guest,
+	__KVM_HOST_SMCCC_FUNC___pkvm_host_unshare_guest,
+	__KVM_HOST_SMCCC_FUNC___pkvm_host_relax_perms_guest,
+	__KVM_HOST_SMCCC_FUNC___pkvm_host_wrprotect_guest,
+	__KVM_HOST_SMCCC_FUNC___pkvm_host_test_clear_young_guest,
+	__KVM_HOST_SMCCC_FUNC___pkvm_host_mkyoung_guest,
 	__KVM_HOST_SMCCC_FUNC___kvm_adjust_pc,
 	__KVM_HOST_SMCCC_FUNC___kvm_vcpu_run,
 	__KVM_HOST_SMCCC_FUNC___kvm_flush_vm_context,
@@ -74,11 +79,16 @@ enum __kvm_host_smccc_func {
 	__KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid_range,
 	__KVM_HOST_SMCCC_FUNC___kvm_flush_cpu_context,
 	__KVM_HOST_SMCCC_FUNC___kvm_timer_set_cntvoff,
-	__KVM_HOST_SMCCC_FUNC___vgic_v3_save_vmcr_aprs,
+	__KVM_HOST_SMCCC_FUNC___vgic_v3_save_aprs,
 	__KVM_HOST_SMCCC_FUNC___vgic_v3_restore_vmcr_aprs,
+	__KVM_HOST_SMCCC_FUNC___pkvm_reserve_vm,
+	__KVM_HOST_SMCCC_FUNC___pkvm_unreserve_vm,
 	__KVM_HOST_SMCCC_FUNC___pkvm_init_vm,
 	__KVM_HOST_SMCCC_FUNC___pkvm_init_vcpu,
 	__KVM_HOST_SMCCC_FUNC___pkvm_teardown_vm,
+	__KVM_HOST_SMCCC_FUNC___pkvm_vcpu_load,
+	__KVM_HOST_SMCCC_FUNC___pkvm_vcpu_put,
+	__KVM_HOST_SMCCC_FUNC___pkvm_tlb_flush_vmid,
 };
 
 #define DECLARE_KVM_VHE_SYM(sym)	extern char sym[]
@@ -236,9 +246,9 @@ extern void __kvm_tlb_flush_vmid(struct kvm_s2_mmu *mmu);
 extern int __kvm_tlbi_s1e2(struct kvm_s2_mmu *mmu, u64 va, u64 sys_encoding);
 
 extern void __kvm_timer_set_cntvoff(u64 cntvoff);
-extern void __kvm_at_s1e01(struct kvm_vcpu *vcpu, u32 op, u64 vaddr);
-extern void __kvm_at_s1e2(struct kvm_vcpu *vcpu, u32 op, u64 vaddr);
-extern void __kvm_at_s12(struct kvm_vcpu *vcpu, u32 op, u64 vaddr);
+extern int __kvm_at_s1e01(struct kvm_vcpu *vcpu, u32 op, u64 vaddr);
+extern int __kvm_at_s1e2(struct kvm_vcpu *vcpu, u32 op, u64 vaddr);
+extern int __kvm_at_s12(struct kvm_vcpu *vcpu, u32 op, u64 vaddr);
 
 extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
 
@@ -247,8 +257,6 @@ extern void __kvm_adjust_pc(struct kvm_vcpu *vcpu);
 extern u64 __vgic_v3_get_gic_config(void);
 extern void __vgic_v3_init_lrs(void);
 
-extern u64 __kvm_get_mdcr_el2(void);
-
 #define __KVM_EXTABLE(from, to)						\
 	"	.pushsection	__kvm_ex_table, \"a\"\n"		\
 	"	.align		3\n"					\
@@ -295,7 +303,7 @@ void kvm_compute_final_ctr_el0(struct alt_instr *alt,
 void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr_virt,
 	u64 elr_phys, u64 par, uintptr_t vcpu, u64 far, u64 hpfar);
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 .macro get_host_ctxt reg, tmp
 	adr_this_cpu \reg, kvm_host_data, \tmp
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index cf811009a33c..c9eab316398e 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -45,16 +45,39 @@ bool kvm_condition_valid32(const struct kvm_vcpu *vcpu);
 void kvm_skip_instr32(struct kvm_vcpu *vcpu);
 
 void kvm_inject_undefined(struct kvm_vcpu *vcpu);
-void kvm_inject_vabt(struct kvm_vcpu *vcpu);
-void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr);
-void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr);
+int kvm_inject_serror_esr(struct kvm_vcpu *vcpu, u64 esr);
+int kvm_inject_sea(struct kvm_vcpu *vcpu, bool iabt, u64 addr);
 void kvm_inject_size_fault(struct kvm_vcpu *vcpu);
 
+static inline int kvm_inject_sea_dabt(struct kvm_vcpu *vcpu, u64 addr)
+{
+	return kvm_inject_sea(vcpu, false, addr);
+}
+
+static inline int kvm_inject_sea_iabt(struct kvm_vcpu *vcpu, u64 addr)
+{
+	return kvm_inject_sea(vcpu, true, addr);
+}
+
+static inline int kvm_inject_serror(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * ESR_ELx.ISV (later renamed to IDS) indicates whether or not
+	 * ESR_ELx.ISS contains IMPLEMENTATION DEFINED syndrome information.
+	 *
+	 * Set the bit when injecting an SError w/o an ESR to indicate ISS
+	 * does not follow the architected format.
+	 */
+	return kvm_inject_serror_esr(vcpu, ESR_ELx_ISV);
+}
+
 void kvm_vcpu_wfi(struct kvm_vcpu *vcpu);
 
 void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu);
 int kvm_inject_nested_sync(struct kvm_vcpu *vcpu, u64 esr_el2);
 int kvm_inject_nested_irq(struct kvm_vcpu *vcpu);
+int kvm_inject_nested_sea(struct kvm_vcpu *vcpu, bool iabt, u64 addr);
+int kvm_inject_nested_serror(struct kvm_vcpu *vcpu, u64 esr);
 
 static inline void kvm_inject_nested_sve_trap(struct kvm_vcpu *vcpu)
 {
@@ -184,29 +207,49 @@ static inline bool vcpu_is_el2(const struct kvm_vcpu *vcpu)
 	return vcpu_is_el2_ctxt(&vcpu->arch.ctxt);
 }
 
-static inline bool __vcpu_el2_e2h_is_set(const struct kvm_cpu_context *ctxt)
+static inline bool vcpu_el2_e2h_is_set(const struct kvm_vcpu *vcpu)
 {
 	return (!cpus_have_final_cap(ARM64_HAS_HCR_NV1) ||
-		(ctxt_sys_reg(ctxt, HCR_EL2) & HCR_E2H));
+		(__vcpu_sys_reg(vcpu, HCR_EL2) & HCR_E2H));
 }
 
-static inline bool vcpu_el2_e2h_is_set(const struct kvm_vcpu *vcpu)
+static inline bool vcpu_el2_tge_is_set(const struct kvm_vcpu *vcpu)
 {
-	return __vcpu_el2_e2h_is_set(&vcpu->arch.ctxt);
+	return ctxt_sys_reg(&vcpu->arch.ctxt, HCR_EL2) & HCR_TGE;
 }
 
-static inline bool __vcpu_el2_tge_is_set(const struct kvm_cpu_context *ctxt)
+static inline bool vcpu_el2_amo_is_set(const struct kvm_vcpu *vcpu)
 {
-	return ctxt_sys_reg(ctxt, HCR_EL2) & HCR_TGE;
-}
+	/*
+	 * DDI0487L.b Known Issue D22105
+	 *
+	 * When executing at EL2 and HCR_EL2.{E2H,TGE} = {1, 0} it is
+	 * IMPLEMENTATION DEFINED whether the effective value of HCR_EL2.AMO
+	 * is the value programmed or 1.
+	 *
+	 * Make the implementation choice of treating the effective value as 1 as
+	 * we cannot subsequently catch changes to TGE or AMO that would
+	 * otherwise lead to the SError becoming deliverable.
+	 */
+	if (vcpu_is_el2(vcpu) && vcpu_el2_e2h_is_set(vcpu) && !vcpu_el2_tge_is_set(vcpu))
+		return true;
 
-static inline bool vcpu_el2_tge_is_set(const struct kvm_vcpu *vcpu)
-{
-	return __vcpu_el2_tge_is_set(&vcpu->arch.ctxt);
+	return ctxt_sys_reg(&vcpu->arch.ctxt, HCR_EL2) & HCR_AMO;
 }
 
-static inline bool __is_hyp_ctxt(const struct kvm_cpu_context *ctxt)
+static inline bool is_hyp_ctxt(const struct kvm_vcpu *vcpu)
 {
+	bool e2h, tge;
+	u64 hcr;
+
+	if (!vcpu_has_nv(vcpu))
+		return false;
+
+	hcr = __vcpu_sys_reg(vcpu, HCR_EL2);
+
+	e2h = (hcr & HCR_E2H);
+	tge = (hcr & HCR_TGE);
+
 	/*
 	 * We are in a hypervisor context if the vcpu mode is EL2 or
 	 * E2H and TGE bits are set. The latter means we are in the user space
@@ -215,19 +258,26 @@ static inline bool __is_hyp_ctxt(const struct kvm_cpu_context *ctxt)
 	 * Note that the HCR_EL2.{E2H,TGE}={0,1} isn't really handled in the
 	 * rest of the KVM code, and will result in a misbehaving guest.
 	 */
-	return vcpu_is_el2_ctxt(ctxt) ||
-		(__vcpu_el2_e2h_is_set(ctxt) && __vcpu_el2_tge_is_set(ctxt)) ||
-		__vcpu_el2_tge_is_set(ctxt);
+	return vcpu_is_el2(vcpu) || (e2h && tge) || tge;
 }
 
-static inline bool is_hyp_ctxt(const struct kvm_vcpu *vcpu)
+static inline bool vcpu_is_host_el0(const struct kvm_vcpu *vcpu)
 {
-	return vcpu_has_nv(vcpu) && __is_hyp_ctxt(&vcpu->arch.ctxt);
+	return is_hyp_ctxt(vcpu) && !vcpu_is_el2(vcpu);
 }
 
-static inline bool vcpu_is_host_el0(const struct kvm_vcpu *vcpu)
+static inline bool is_nested_ctxt(struct kvm_vcpu *vcpu)
 {
-	return is_hyp_ctxt(vcpu) && !vcpu_is_el2(vcpu);
+	return vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu);
+}
+
+static inline bool vserror_state_is_nested(struct kvm_vcpu *vcpu)
+{
+	if (!is_nested_ctxt(vcpu))
+		return false;
+
+	return vcpu_el2_amo_is_set(vcpu) ||
+	       (__vcpu_sys_reg(vcpu, HCRX_EL2) & HCRX_EL2_TMEA);
 }
 
 /*
@@ -281,6 +331,19 @@ static __always_inline u64 kvm_vcpu_get_esr(const struct kvm_vcpu *vcpu)
 	return vcpu->arch.fault.esr_el2;
 }
 
+static inline bool guest_hyp_wfx_traps_enabled(const struct kvm_vcpu *vcpu)
+{
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+	bool is_wfe = !!(esr & ESR_ELx_WFx_ISS_WFE);
+	u64 hcr_el2 = __vcpu_sys_reg(vcpu, HCR_EL2);
+
+	if (!vcpu_has_nv(vcpu) || vcpu_is_el2(vcpu))
+		return false;
+
+	return ((is_wfe && (hcr_el2 & HCR_TWE)) ||
+		(!is_wfe && (hcr_el2 & HCR_TWI)));
+}
+
 static __always_inline int kvm_vcpu_get_condition(const struct kvm_vcpu *vcpu)
 {
 	u64 esr = kvm_vcpu_get_esr(vcpu);
@@ -298,7 +361,12 @@ static __always_inline unsigned long kvm_vcpu_get_hfar(const struct kvm_vcpu *vc
 
 static __always_inline phys_addr_t kvm_vcpu_get_fault_ipa(const struct kvm_vcpu *vcpu)
 {
-	return ((phys_addr_t)vcpu->arch.fault.hpfar_el2 & HPFAR_MASK) << 8;
+	u64 hpfar = vcpu->arch.fault.hpfar_el2;
+
+	if (unlikely(!(hpfar & HPFAR_EL2_NS)))
+		return INVALID_GPA;
+
+	return FIELD_GET(HPFAR_EL2_FIPA, hpfar) << 12;
 }
 
 static inline u64 kvm_vcpu_get_disr(const struct kvm_vcpu *vcpu)
@@ -457,21 +525,29 @@ static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
 	if (vcpu_mode_is_32bit(vcpu)) {
 		*vcpu_cpsr(vcpu) |= PSR_AA32_E_BIT;
 	} else {
-		u64 sctlr = vcpu_read_sys_reg(vcpu, SCTLR_EL1);
+		enum vcpu_sysreg r;
+		u64 sctlr;
+
+		r = vcpu_has_nv(vcpu) ? SCTLR_EL2 : SCTLR_EL1;
+
+		sctlr = vcpu_read_sys_reg(vcpu, r);
 		sctlr |= SCTLR_ELx_EE;
-		vcpu_write_sys_reg(vcpu, sctlr, SCTLR_EL1);
+		vcpu_write_sys_reg(vcpu, sctlr, r);
 	}
 }
 
 static inline bool kvm_vcpu_is_be(struct kvm_vcpu *vcpu)
 {
+	enum vcpu_sysreg r;
+	u64 bit;
+
 	if (vcpu_mode_is_32bit(vcpu))
 		return !!(*vcpu_cpsr(vcpu) & PSR_AA32_E_BIT);
 
-	if (vcpu_mode_priv(vcpu))
-		return !!(vcpu_read_sys_reg(vcpu, SCTLR_EL1) & SCTLR_ELx_EE);
-	else
-		return !!(vcpu_read_sys_reg(vcpu, SCTLR_EL1) & SCTLR_EL1_E0E);
+	r = is_hyp_ctxt(vcpu) ? SCTLR_EL2 : SCTLR_EL1;
+	bit = vcpu_mode_priv(vcpu) ? SCTLR_ELx_EE : SCTLR_EL1_E0E;
+
+	return vcpu_read_sys_reg(vcpu, r) & bit;
 }
 
 static inline unsigned long vcpu_data_guest_to_host(struct kvm_vcpu *vcpu,
@@ -549,110 +625,6 @@ static __always_inline void kvm_incr_pc(struct kvm_vcpu *vcpu)
 		vcpu_set_flag((v), e);					\
 	} while (0)
 
-#define __build_check_all_or_none(r, bits)				\
-	BUILD_BUG_ON(((r) & (bits)) && ((r) & (bits)) != (bits))
-
-#define __cpacr_to_cptr_clr(clr, set)					\
-	({								\
-		u64 cptr = 0;						\
-									\
-		if ((set) & CPACR_ELx_FPEN)				\
-			cptr |= CPTR_EL2_TFP;				\
-		if ((set) & CPACR_ELx_ZEN)				\
-			cptr |= CPTR_EL2_TZ;				\
-		if ((set) & CPACR_ELx_SMEN)				\
-			cptr |= CPTR_EL2_TSM;				\
-		if ((clr) & CPACR_ELx_TTA)				\
-			cptr |= CPTR_EL2_TTA;				\
-		if ((clr) & CPTR_EL2_TAM)				\
-			cptr |= CPTR_EL2_TAM;				\
-		if ((clr) & CPTR_EL2_TCPAC)				\
-			cptr |= CPTR_EL2_TCPAC;				\
-									\
-		cptr;							\
-	})
-
-#define __cpacr_to_cptr_set(clr, set)					\
-	({								\
-		u64 cptr = 0;						\
-									\
-		if ((clr) & CPACR_ELx_FPEN)				\
-			cptr |= CPTR_EL2_TFP;				\
-		if ((clr) & CPACR_ELx_ZEN)				\
-			cptr |= CPTR_EL2_TZ;				\
-		if ((clr) & CPACR_ELx_SMEN)				\
-			cptr |= CPTR_EL2_TSM;				\
-		if ((set) & CPACR_ELx_TTA)				\
-			cptr |= CPTR_EL2_TTA;				\
-		if ((set) & CPTR_EL2_TAM)				\
-			cptr |= CPTR_EL2_TAM;				\
-		if ((set) & CPTR_EL2_TCPAC)				\
-			cptr |= CPTR_EL2_TCPAC;				\
-									\
-		cptr;							\
-	})
-
-#define cpacr_clear_set(clr, set)					\
-	do {								\
-		BUILD_BUG_ON((set) & CPTR_VHE_EL2_RES0);		\
-		BUILD_BUG_ON((clr) & CPACR_ELx_E0POE);			\
-		__build_check_all_or_none((clr), CPACR_ELx_FPEN);	\
-		__build_check_all_or_none((set), CPACR_ELx_FPEN);	\
-		__build_check_all_or_none((clr), CPACR_ELx_ZEN);	\
-		__build_check_all_or_none((set), CPACR_ELx_ZEN);	\
-		__build_check_all_or_none((clr), CPACR_ELx_SMEN);	\
-		__build_check_all_or_none((set), CPACR_ELx_SMEN);	\
-									\
-		if (has_vhe() || has_hvhe())				\
-			sysreg_clear_set(cpacr_el1, clr, set);		\
-		else							\
-			sysreg_clear_set(cptr_el2,			\
-					 __cpacr_to_cptr_clr(clr, set),	\
-					 __cpacr_to_cptr_set(clr, set));\
-	} while (0)
-
-static __always_inline void kvm_write_cptr_el2(u64 val)
-{
-	if (has_vhe() || has_hvhe())
-		write_sysreg(val, cpacr_el1);
-	else
-		write_sysreg(val, cptr_el2);
-}
-
-static __always_inline u64 kvm_get_reset_cptr_el2(struct kvm_vcpu *vcpu)
-{
-	u64 val;
-
-	if (has_vhe()) {
-		val = (CPACR_ELx_FPEN | CPACR_EL1_ZEN_EL1EN);
-		if (cpus_have_final_cap(ARM64_SME))
-			val |= CPACR_EL1_SMEN_EL1EN;
-	} else if (has_hvhe()) {
-		val = CPACR_ELx_FPEN;
-
-		if (!vcpu_has_sve(vcpu) || !guest_owns_fp_regs())
-			val |= CPACR_ELx_ZEN;
-		if (cpus_have_final_cap(ARM64_SME))
-			val |= CPACR_ELx_SMEN;
-	} else {
-		val = CPTR_NVHE_EL2_RES1;
-
-		if (vcpu_has_sve(vcpu) && guest_owns_fp_regs())
-			val |= CPTR_EL2_TZ;
-		if (cpus_have_final_cap(ARM64_SME))
-			val &= ~CPTR_EL2_TSM;
-	}
-
-	return val;
-}
-
-static __always_inline void kvm_reset_cptr_el2(struct kvm_vcpu *vcpu)
-{
-	u64 val = kvm_get_reset_cptr_el2(vcpu);
-
-	kvm_write_cptr_el2(val);
-}
-
 /*
  * Returns a 'sanitised' view of CPTR_EL2, translating from nVHE to the VHE
  * format if E2H isn't set.
@@ -685,7 +657,7 @@ static inline bool ____cptr_xen_trap_enabled(const struct kvm_vcpu *vcpu,
 #define __guest_hyp_cptr_xen_trap_enabled(vcpu, xen)				\
 	(!vcpu_has_nv(vcpu) ? false :						\
 	 ____cptr_xen_trap_enabled(vcpu,					\
-				   SYS_FIELD_GET(CPACR_ELx, xen,		\
+				   SYS_FIELD_GET(CPACR_EL1, xen,		\
 						 vcpu_sanitised_cptr_el2(vcpu))))
 
 static inline bool guest_hyp_fpsimd_traps_enabled(const struct kvm_vcpu *vcpu)
@@ -698,8 +670,30 @@ static inline bool guest_hyp_sve_traps_enabled(const struct kvm_vcpu *vcpu)
 	return __guest_hyp_cptr_xen_trap_enabled(vcpu, ZEN);
 }
 
-static inline void kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu)
+static inline void vcpu_set_hcrx(struct kvm_vcpu *vcpu)
 {
-	vcpu_set_flag(vcpu, GUEST_HAS_PTRAUTH);
+	struct kvm *kvm = vcpu->kvm;
+
+	if (cpus_have_final_cap(ARM64_HAS_HCX)) {
+		/*
+		 * In general, all HCRX_EL2 bits are gated by a feature.
+		 * The only reason we can set SMPME without checking any
+		 * feature is that its effects are not directly observable
+		 * from the guest.
+		 */
+		vcpu->arch.hcrx_el2 = HCRX_EL2_SMPME;
+
+		if (kvm_has_feat(kvm, ID_AA64ISAR2_EL1, MOPS, IMP))
+			vcpu->arch.hcrx_el2 |= (HCRX_EL2_MSCEn | HCRX_EL2_MCE2);
+
+		if (kvm_has_tcr2(kvm))
+			vcpu->arch.hcrx_el2 |= HCRX_EL2_TCR2En;
+
+		if (kvm_has_fpmr(kvm))
+			vcpu->arch.hcrx_el2 |= HCRX_EL2_EnFPM;
+
+		if (kvm_has_sctlr2(kvm))
+			vcpu->arch.hcrx_el2 |= HCRX_EL2_SCTLR2En;
+	}
 }
 #endif /* __ARM64_KVM_EMULATE_H__ */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index e18e9244d17a..ac7f970c7883 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -39,19 +39,22 @@
 
 #define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
 
-#define KVM_VCPU_MAX_FEATURES 7
+#define KVM_VCPU_MAX_FEATURES 9
 #define KVM_VCPU_VALID_FEATURES	(BIT(KVM_VCPU_MAX_FEATURES) - 1)
 
 #define KVM_REQ_SLEEP \
 	KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
-#define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
-#define KVM_REQ_VCPU_RESET	KVM_ARCH_REQ(2)
-#define KVM_REQ_RECORD_STEAL	KVM_ARCH_REQ(3)
-#define KVM_REQ_RELOAD_GICv4	KVM_ARCH_REQ(4)
-#define KVM_REQ_RELOAD_PMU	KVM_ARCH_REQ(5)
-#define KVM_REQ_SUSPEND		KVM_ARCH_REQ(6)
-#define KVM_REQ_RESYNC_PMU_EL0	KVM_ARCH_REQ(7)
-#define KVM_REQ_NESTED_S2_UNMAP	KVM_ARCH_REQ(8)
+#define KVM_REQ_IRQ_PENDING		KVM_ARCH_REQ(1)
+#define KVM_REQ_VCPU_RESET		KVM_ARCH_REQ(2)
+#define KVM_REQ_RECORD_STEAL		KVM_ARCH_REQ(3)
+#define KVM_REQ_RELOAD_GICv4		KVM_ARCH_REQ(4)
+#define KVM_REQ_RELOAD_PMU		KVM_ARCH_REQ(5)
+#define KVM_REQ_SUSPEND			KVM_ARCH_REQ(6)
+#define KVM_REQ_RESYNC_PMU_EL0		KVM_ARCH_REQ(7)
+#define KVM_REQ_NESTED_S2_UNMAP		KVM_ARCH_REQ(8)
+#define KVM_REQ_GUEST_HYP_IRQ_PENDING	KVM_ARCH_REQ(9)
+#define KVM_REQ_MAP_L1_VNCR_EL2		KVM_ARCH_REQ(10)
+#define KVM_REQ_VGIC_PROCESS_UPDATE	KVM_ARCH_REQ(11)
 
 #define KVM_DIRTY_LOG_MANUAL_CAPS   (KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE | \
 				     KVM_DIRTY_LOG_INITIALLY_SET)
@@ -85,6 +88,10 @@ void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu);
 struct kvm_hyp_memcache {
 	phys_addr_t head;
 	unsigned long nr_pages;
+	struct pkvm_mapping *mapping; /* only used from EL1 */
+
+#define	HYP_MEMCACHE_ACCOUNT_STAGE2	BIT(1)
+	unsigned long flags;
 };
 
 static inline void push_hyp_memcache(struct kvm_hyp_memcache *mc,
@@ -99,7 +106,7 @@ static inline void push_hyp_memcache(struct kvm_hyp_memcache *mc,
 static inline void *pop_hyp_memcache(struct kvm_hyp_memcache *mc,
 				     void *(*to_va)(phys_addr_t phys))
 {
-	phys_addr_t *p = to_va(mc->head);
+	phys_addr_t *p = to_va(mc->head & PAGE_MASK);
 
 	if (!mc->nr_pages)
 		return NULL;
@@ -236,7 +243,8 @@ struct kvm_arch_memory_slot {
 struct kvm_smccc_features {
 	unsigned long std_bmap;
 	unsigned long std_hyp_bmap;
-	unsigned long vendor_hyp_bmap;
+	unsigned long vendor_hyp_bmap; /* Function numbers 0-63 */
+	unsigned long vendor_hyp_bmap_2; /* Function numbers 64-127 */
 };
 
 typedef unsigned int pkvm_handle_t;
@@ -244,7 +252,9 @@ typedef unsigned int pkvm_handle_t;
 struct kvm_protected_vm {
 	pkvm_handle_t handle;
 	struct kvm_hyp_memcache teardown_mc;
-	bool enabled;
+	struct kvm_hyp_memcache stage2_teardown_mc;
+	bool is_protected;
+	bool is_created;
 };
 
 struct kvm_mpidr_data {
@@ -266,11 +276,17 @@ struct kvm_sysreg_masks;
 
 enum fgt_group_id {
 	__NO_FGT_GROUP__,
-	HFGxTR_GROUP,
+	HFGRTR_GROUP,
+	HFGWTR_GROUP = HFGRTR_GROUP,
 	HDFGRTR_GROUP,
 	HDFGWTR_GROUP = HDFGRTR_GROUP,
 	HFGITR_GROUP,
 	HAFGRTR_GROUP,
+	HFGRTR2_GROUP,
+	HFGWTR2_GROUP = HFGRTR2_GROUP,
+	HDFGRTR2_GROUP,
+	HDFGWTR2_GROUP = HDFGRTR2_GROUP,
+	HFGITR2_GROUP,
 
 	/* Must be last */
 	__NR_FGT_GROUP_IDS__
@@ -331,6 +347,12 @@ struct kvm_arch {
 #define KVM_ARCH_FLAG_ID_REGS_INITIALIZED		7
 	/* Fine-Grained UNDEF initialised */
 #define KVM_ARCH_FLAG_FGU_INITIALIZED			8
+	/* SVE exposed to guest */
+#define KVM_ARCH_FLAG_GUEST_HAS_SVE			9
+	/* MIDR_EL1, REVIDR_EL1, and AIDR_EL1 are writable from userspace */
+#define KVM_ARCH_FLAG_WRITABLE_IMP_ID_REGS		10
+	/* Unhandled SEAs are taken to userspace */
+#define KVM_ARCH_FLAG_EXIT_SEA				11
 	unsigned long flags;
 
 	/* VM-wide vCPU feature set */
@@ -348,8 +370,8 @@ struct kvm_arch {
 
 	cpumask_var_t supported_cpus;
 
-	/* PMCR_EL0.N value for the guest */
-	u8 pmcr_n;
+	/* Maximum number of counters for the guest */
+	u8 nr_pmu_counters;
 
 	/* Iterator for idreg debugfs */
 	u8	idreg_debugfs_iter;
@@ -370,11 +392,17 @@ struct kvm_arch {
 #define KVM_ARM_ID_REG_NUM	(IDREG_IDX(sys_reg(3, 0, 0, 7, 7)) + 1)
 	u64 id_regs[KVM_ARM_ID_REG_NUM];
 
+	u64 midr_el1;
+	u64 revidr_el1;
+	u64 aidr_el1;
 	u64 ctr_el0;
 
 	/* Masks for VNCR-backed and general EL2 sysregs */
 	struct kvm_sysreg_masks	*sysreg_masks;
 
+	/* Count the number of VNCR_EL2 currently mapped */
+	atomic_t vncr_map_count;
+
 	/*
 	 * For an untrusted host VM, 'pkvm.handle' is used to lookup
 	 * the associated pKVM instance in the hypervisor.
@@ -490,7 +518,6 @@ enum vcpu_sysreg {
 	VBAR_EL2,	/* Vector Base Address Register (EL2) */
 	RVBAR_EL2,	/* Reset Vector Base Address Register */
 	CONTEXTIDR_EL2,	/* Context ID Register (EL2) */
-	CNTHCTL_EL2,	/* Counter-timer Hypervisor Control register */
 	SP_EL2,		/* EL2 Stack Pointer */
 	CNTHP_CTL_EL2,
 	CNTHP_CVAL_EL2,
@@ -500,7 +527,9 @@ enum vcpu_sysreg {
 	/* Anything from this can be RES0/RES1 sanitised */
 	MARKER(__SANITISED_REG_START__),
 	TCR2_EL2,	/* Extended Translation Control Register (EL2) */
+	SCTLR2_EL2,	/* System Control Register 2 (EL2) */
 	MDCR_EL2,	/* Monitor Debug Configuration Register (EL2) */
+	CNTHCTL_EL2,	/* Counter-timer Hypervisor Control register */
 
 	/* Any VNCR-capable reg goes after this point */
 	MARKER(__VNCR_START__),
@@ -513,6 +542,7 @@ enum vcpu_sysreg {
 	VNCR(TTBR1_EL1),/* Translation Table Base Register 1 */
 	VNCR(TCR_EL1),	/* Translation Control Register */
 	VNCR(TCR2_EL1),	/* Extended Translation Control Register */
+	VNCR(SCTLR2_EL1), /* System Control Register 2 */
 	VNCR(ESR_EL1),	/* Exception Syndrome Register */
 	VNCR(AFSR0_EL1),/* Auxiliary Fault Status Register 0 */
 	VNCR(AFSR1_EL1),/* Auxiliary Fault Status Register 1 */
@@ -541,12 +571,23 @@ enum vcpu_sysreg {
 
 	VNCR(POR_EL1),	/* Permission Overlay Register 1 (EL1) */
 
+	/* FEAT_RAS registers */
+	VNCR(VDISR_EL2),
+	VNCR(VSESR_EL2),
+
 	VNCR(HFGRTR_EL2),
 	VNCR(HFGWTR_EL2),
 	VNCR(HFGITR_EL2),
 	VNCR(HDFGRTR_EL2),
 	VNCR(HDFGWTR_EL2),
 	VNCR(HAFGRTR_EL2),
+	VNCR(HFGRTR2_EL2),
+	VNCR(HFGWTR2_EL2),
+	VNCR(HFGITR2_EL2),
+	VNCR(HDFGRTR2_EL2),
+	VNCR(HDFGWTR2_EL2),
+
+	VNCR(VNCR_EL2),
 
 	VNCR(CNTVOFF_EL2),
 	VNCR(CNTV_CVAL_EL0),
@@ -554,7 +595,33 @@ enum vcpu_sysreg {
 	VNCR(CNTP_CVAL_EL0),
 	VNCR(CNTP_CTL_EL0),
 
+	VNCR(ICH_LR0_EL2),
+	VNCR(ICH_LR1_EL2),
+	VNCR(ICH_LR2_EL2),
+	VNCR(ICH_LR3_EL2),
+	VNCR(ICH_LR4_EL2),
+	VNCR(ICH_LR5_EL2),
+	VNCR(ICH_LR6_EL2),
+	VNCR(ICH_LR7_EL2),
+	VNCR(ICH_LR8_EL2),
+	VNCR(ICH_LR9_EL2),
+	VNCR(ICH_LR10_EL2),
+	VNCR(ICH_LR11_EL2),
+	VNCR(ICH_LR12_EL2),
+	VNCR(ICH_LR13_EL2),
+	VNCR(ICH_LR14_EL2),
+	VNCR(ICH_LR15_EL2),
+
+	VNCR(ICH_AP0R0_EL2),
+	VNCR(ICH_AP0R1_EL2),
+	VNCR(ICH_AP0R2_EL2),
+	VNCR(ICH_AP0R3_EL2),
+	VNCR(ICH_AP1R0_EL2),
+	VNCR(ICH_AP1R1_EL2),
+	VNCR(ICH_AP1R2_EL2),
+	VNCR(ICH_AP1R3_EL2),
 	VNCR(ICH_HCR_EL2),
+	VNCR(ICH_VMCR_EL2),
 
 	NR_SYS_REGS	/* Nothing after this line! */
 };
@@ -566,6 +633,37 @@ struct kvm_sysreg_masks {
 	} mask[NR_SYS_REGS - __SANITISED_REG_START__];
 };
 
+struct fgt_masks {
+	const char	*str;
+	u64		mask;
+	u64		nmask;
+	u64		res0;
+};
+
+extern struct fgt_masks hfgrtr_masks;
+extern struct fgt_masks hfgwtr_masks;
+extern struct fgt_masks hfgitr_masks;
+extern struct fgt_masks hdfgrtr_masks;
+extern struct fgt_masks hdfgwtr_masks;
+extern struct fgt_masks hafgrtr_masks;
+extern struct fgt_masks hfgrtr2_masks;
+extern struct fgt_masks hfgwtr2_masks;
+extern struct fgt_masks hfgitr2_masks;
+extern struct fgt_masks hdfgrtr2_masks;
+extern struct fgt_masks hdfgwtr2_masks;
+
+extern struct fgt_masks kvm_nvhe_sym(hfgrtr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hfgwtr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hfgitr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hdfgrtr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hdfgwtr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hafgrtr_masks);
+extern struct fgt_masks kvm_nvhe_sym(hfgrtr2_masks);
+extern struct fgt_masks kvm_nvhe_sym(hfgwtr2_masks);
+extern struct fgt_masks kvm_nvhe_sym(hfgitr2_masks);
+extern struct fgt_masks kvm_nvhe_sym(hdfgrtr2_masks);
+extern struct fgt_masks kvm_nvhe_sym(hdfgwtr2_masks);
+
 struct kvm_cpu_context {
 	struct user_pt_regs regs;	/* sp = sp_el0 */
 
@@ -610,26 +708,25 @@ struct cpu_sve_state {
  * field.
  */
 struct kvm_host_data {
+#define KVM_HOST_DATA_FLAG_HAS_SPE			0
+#define KVM_HOST_DATA_FLAG_HAS_TRBE			1
+#define KVM_HOST_DATA_FLAG_TRBE_ENABLED			4
+#define KVM_HOST_DATA_FLAG_EL1_TRACING_CONFIGURED	5
+#define KVM_HOST_DATA_FLAG_VCPU_IN_HYP_CONTEXT		6
+#define KVM_HOST_DATA_FLAG_L1_VNCR_MAPPED		7
+#define KVM_HOST_DATA_FLAG_HAS_BRBE			8
+	unsigned long flags;
+
 	struct kvm_cpu_context host_ctxt;
 
 	/*
-	 * All pointers in this union are hyp VA.
+	 * Hyp VA.
 	 * sve_state is only used in pKVM and if system_supports_sve().
 	 */
-	union {
-		struct user_fpsimd_state *fpsimd_state;
-		struct cpu_sve_state *sve_state;
-	};
-
-	union {
-		/* HYP VA pointer to the host storage for FPMR */
-		u64	*fpmr_ptr;
-		/*
-		 * Used by pKVM only, as it needs to provide storage
-		 * for the host
-		 */
-		u64	fpmr;
-	};
+	struct cpu_sve_state *sve_state;
+
+	/* Used by pKVM only. */
+	u64	fpmr;
 
 	/* Ownership of the FP regs */
 	enum {
@@ -642,7 +739,7 @@ struct kvm_host_data {
 	 * host_debug_state contains the host registers which are
 	 * saved and restored during world switches.
 	 */
-	 struct {
+	struct {
 		/* {Break,watch}point registers */
 		struct kvm_guest_debug_arch regs;
 		/* Statistical profiling extension */
@@ -651,7 +748,18 @@ struct kvm_host_data {
 		u64 trfcr_el1;
 		/* Values of trap registers for the host before guest entry. */
 		u64 mdcr_el2;
+		u64 brbcr_el1;
 	} host_debug_state;
+
+	/* Guest trace filter value */
+	u64 trfcr_while_in_guest;
+
+	/* Number of programmable event counters (PMCR_EL0.N) for this CPU */
+	unsigned int nr_event_counters;
+
+	/* Number of debug breakpoints/watchpoints for this CPU (minus 1) */
+	unsigned int debug_brps;
+	unsigned int debug_wrps;
 };
 
 struct kvm_host_psci_config {
@@ -684,6 +792,8 @@ struct vcpu_reset_state {
 	bool		reset;
 };
 
+struct vncr_tlb;
+
 struct kvm_vcpu_arch {
 	struct kvm_cpu_context ctxt;
 
@@ -708,7 +818,11 @@ struct kvm_vcpu_arch {
 	u64 hcr_el2;
 	u64 hcrx_el2;
 	u64 mdcr_el2;
-	u64 cptr_el2;
+
+	struct {
+		u64 r;
+		u64 w;
+	} fgt[__NR_FGT_GROUP_IDS__];
 
 	/* Exception Information */
 	struct kvm_vcpu_fault_info fault;
@@ -720,7 +834,7 @@ struct kvm_vcpu_arch {
 	u8 iflags;
 
 	/* State flags for kernel bookkeeping, unused by the hypervisor code */
-	u8 sflags;
+	u16 sflags;
 
 	/*
 	 * Don't run the guest (internal implementation need).
@@ -739,31 +853,22 @@ struct kvm_vcpu_arch {
 	 *
 	 * external_debug_state contains the debug values we want to debug the
 	 * guest. This is set via the KVM_SET_GUEST_DEBUG ioctl.
-	 *
-	 * debug_ptr points to the set of debug registers that should be loaded
-	 * onto the hardware when running the guest.
 	 */
-	struct kvm_guest_debug_arch *debug_ptr;
 	struct kvm_guest_debug_arch vcpu_debug_state;
 	struct kvm_guest_debug_arch external_debug_state;
+	u64 external_mdscr_el1;
+
+	enum {
+		VCPU_DEBUG_FREE,
+		VCPU_DEBUG_HOST_OWNED,
+		VCPU_DEBUG_GUEST_OWNED,
+	} debug_owner;
 
 	/* VGIC state */
 	struct vgic_cpu vgic_cpu;
 	struct arch_timer_cpu timer_cpu;
 	struct kvm_pmu pmu;
 
-	/*
-	 * Guest registers we preserve during guest debugging.
-	 *
-	 * These shadow registers are updated by the kvm_handle_sys_reg
-	 * trap handler if the guest accesses or updates them while we
-	 * are using guest debug.
-	 */
-	struct {
-		u32	mdscr_el1;
-		bool	pstate_ss;
-	} guest_debug_preserved;
-
 	/* vcpu power state */
 	struct kvm_mp_state mp_state;
 	spinlock_t mp_state_lock;
@@ -771,6 +876,9 @@ struct kvm_vcpu_arch {
 	/* Cache some mmu pages needed inside spinlock regions */
 	struct kvm_mmu_memory_cache mmu_page_cache;
 
+	/* Pages to top-up the pKVM/EL2 guest pool */
+	struct kvm_hyp_memcache pkvm_memcache;
+
 	/* Virtual SError ESR to restore when HCR_EL2.VSE is set */
 	u64 vsesr_el2;
 
@@ -785,6 +893,9 @@ struct kvm_vcpu_arch {
 
 	/* Per-vcpu CCSIDR override or NULL */
 	u32 *ccsidr;
+
+	/* Per-vcpu TLB for VNCR_EL2 -- NULL when !NV */
+	struct vncr_tlb	*vncr_tlb;
 };
 
 /*
@@ -859,18 +970,28 @@ struct kvm_vcpu_arch {
 		__vcpu_flags_preempt_enable();			\
 	} while (0)
 
+#define __vcpu_test_and_clear_flag(v, flagset, f, m)		\
+	({							\
+		typeof(v->arch.flagset) set;			\
+								\
+		set = __vcpu_get_flag(v, flagset, f, m);	\
+		__vcpu_clear_flag(v, flagset, f, m);		\
+								\
+		set;						\
+	})
+
 #define vcpu_get_flag(v, ...)	__vcpu_get_flag((v), __VA_ARGS__)
 #define vcpu_set_flag(v, ...)	__vcpu_set_flag((v), __VA_ARGS__)
 #define vcpu_clear_flag(v, ...)	__vcpu_clear_flag((v), __VA_ARGS__)
+#define vcpu_test_and_clear_flag(v, ...)			\
+	__vcpu_test_and_clear_flag((v), __VA_ARGS__)
 
-/* SVE exposed to guest */
-#define GUEST_HAS_SVE		__vcpu_single_flag(cflags, BIT(0))
+/* KVM_ARM_VCPU_INIT completed */
+#define VCPU_INITIALIZED	__vcpu_single_flag(cflags, BIT(0))
 /* SVE config completed */
 #define VCPU_SVE_FINALIZED	__vcpu_single_flag(cflags, BIT(1))
-/* PTRAUTH exposed to guest */
-#define GUEST_HAS_PTRAUTH	__vcpu_single_flag(cflags, BIT(2))
-/* KVM_ARM_VCPU_INIT completed */
-#define VCPU_INITIALIZED	__vcpu_single_flag(cflags, BIT(3))
+/* pKVM VCPU setup completed */
+#define VCPU_PKVM_FINALIZED	__vcpu_single_flag(cflags, BIT(2))
 
 /* Exception pending */
 #define PENDING_EXCEPTION	__vcpu_single_flag(iflags, BIT(0))
@@ -906,29 +1027,25 @@ struct kvm_vcpu_arch {
 #define EXCEPT_AA64_EL2_IRQ	__vcpu_except_flags(5)
 #define EXCEPT_AA64_EL2_FIQ	__vcpu_except_flags(6)
 #define EXCEPT_AA64_EL2_SERR	__vcpu_except_flags(7)
-/* Guest debug is live */
-#define DEBUG_DIRTY		__vcpu_single_flag(iflags, BIT(4))
-/* Save SPE context if active  */
-#define DEBUG_STATE_SAVE_SPE	__vcpu_single_flag(iflags, BIT(5))
-/* Save TRBE context if active  */
-#define DEBUG_STATE_SAVE_TRBE	__vcpu_single_flag(iflags, BIT(6))
-
-/* SVE enabled for host EL0 */
-#define HOST_SVE_ENABLED	__vcpu_single_flag(sflags, BIT(0))
-/* SME enabled for EL0 */
-#define HOST_SME_ENABLED	__vcpu_single_flag(sflags, BIT(1))
+
 /* Physical CPU not in supported_cpus */
-#define ON_UNSUPPORTED_CPU	__vcpu_single_flag(sflags, BIT(2))
+#define ON_UNSUPPORTED_CPU	__vcpu_single_flag(sflags, BIT(0))
 /* WFIT instruction trapped */
-#define IN_WFIT			__vcpu_single_flag(sflags, BIT(3))
+#define IN_WFIT			__vcpu_single_flag(sflags, BIT(1))
 /* vcpu system registers loaded on physical CPU */
-#define SYSREGS_ON_CPU		__vcpu_single_flag(sflags, BIT(4))
-/* Software step state is Active-pending */
-#define DBG_SS_ACTIVE_PENDING	__vcpu_single_flag(sflags, BIT(5))
+#define SYSREGS_ON_CPU		__vcpu_single_flag(sflags, BIT(2))
+/* Software step state is Active-pending for external debug */
+#define HOST_SS_ACTIVE_PENDING	__vcpu_single_flag(sflags, BIT(3))
+/* Software step state is Active pending for guest debug */
+#define GUEST_SS_ACTIVE_PENDING __vcpu_single_flag(sflags, BIT(4))
 /* PMUSERENR for the guest EL0 is on physical CPU */
-#define PMUSERENR_ON_CPU	__vcpu_single_flag(sflags, BIT(6))
+#define PMUSERENR_ON_CPU	__vcpu_single_flag(sflags, BIT(5))
 /* WFI instruction trapped */
-#define IN_WFI			__vcpu_single_flag(sflags, BIT(7))
+#define IN_WFI			__vcpu_single_flag(sflags, BIT(6))
+/* KVM is currently emulating a nested ERET */
+#define IN_NESTED_ERET		__vcpu_single_flag(sflags, BIT(7))
+/* SError pending for nested guest */
+#define NESTED_SERROR_PENDING	__vcpu_single_flag(sflags, BIT(8))
 
 
 /* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
@@ -940,33 +1057,42 @@ struct kvm_vcpu_arch {
 #define vcpu_sve_zcr_elx(vcpu)						\
 	(unlikely(is_hyp_ctxt(vcpu)) ? ZCR_EL2 : ZCR_EL1)
 
-#define vcpu_sve_state_size(vcpu) ({					\
+#define sve_state_size_from_vl(sve_max_vl) ({				\
 	size_t __size_ret;						\
-	unsigned int __vcpu_vq;						\
+	unsigned int __vq;						\
 									\
-	if (WARN_ON(!sve_vl_valid((vcpu)->arch.sve_max_vl))) {		\
+	if (WARN_ON(!sve_vl_valid(sve_max_vl))) {			\
 		__size_ret = 0;						\
 	} else {							\
-		__vcpu_vq = vcpu_sve_max_vq(vcpu);			\
-		__size_ret = SVE_SIG_REGS_SIZE(__vcpu_vq);		\
+		__vq = sve_vq_from_vl(sve_max_vl);			\
+		__size_ret = SVE_SIG_REGS_SIZE(__vq);			\
 	}								\
 									\
 	__size_ret;							\
 })
 
+#define vcpu_sve_state_size(vcpu) sve_state_size_from_vl((vcpu)->arch.sve_max_vl)
+
 #define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
 				 KVM_GUESTDBG_USE_SW_BP | \
 				 KVM_GUESTDBG_USE_HW | \
 				 KVM_GUESTDBG_SINGLESTEP)
 
-#define vcpu_has_sve(vcpu) (system_supports_sve() &&			\
-			    vcpu_get_flag(vcpu, GUEST_HAS_SVE))
+#define kvm_has_sve(kvm)	(system_supports_sve() &&		\
+				 test_bit(KVM_ARCH_FLAG_GUEST_HAS_SVE, &(kvm)->arch.flags))
+
+#ifdef __KVM_NVHE_HYPERVISOR__
+#define vcpu_has_sve(vcpu)	kvm_has_sve(kern_hyp_va((vcpu)->kvm))
+#else
+#define vcpu_has_sve(vcpu)	kvm_has_sve((vcpu)->kvm)
+#endif
 
 #ifdef CONFIG_ARM64_PTR_AUTH
 #define vcpu_has_ptrauth(vcpu)						\
 	((cpus_have_final_cap(ARM64_HAS_ADDRESS_AUTH) ||		\
 	  cpus_have_final_cap(ARM64_HAS_GENERIC_AUTH)) &&		\
-	  vcpu_get_flag(vcpu, GUEST_HAS_PTRAUTH))
+	 (vcpu_has_feature(vcpu, KVM_ARM_VCPU_PTRAUTH_ADDRESS) ||       \
+	  vcpu_has_feature(vcpu, KVM_ARM_VCPU_PTRAUTH_GENERIC)))
 #else
 #define vcpu_has_ptrauth(vcpu)		false
 #endif
@@ -1012,118 +1138,39 @@ static inline u64 *___ctxt_sys_reg(const struct kvm_cpu_context *ctxt, int r)
 #define ctxt_sys_reg(c,r)	(*__ctxt_sys_reg(c,r))
 
 u64 kvm_vcpu_apply_reg_masks(const struct kvm_vcpu *, enum vcpu_sysreg, u64);
-#define __vcpu_sys_reg(v,r)						\
-	(*({								\
+
+#define __vcpu_assign_sys_reg(v, r, val)				\
+	do {								\
 		const struct kvm_cpu_context *ctxt = &(v)->arch.ctxt;	\
-		u64 *__r = __ctxt_sys_reg(ctxt, (r));			\
+		u64 __v = (val);					\
 		if (vcpu_has_nv((v)) && (r) >= __SANITISED_REG_START__)	\
-			*__r = kvm_vcpu_apply_reg_masks((v), (r), *__r);\
-		__r;							\
-	}))
-
-u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg);
-void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg);
-
-static inline bool __vcpu_read_sys_reg_from_cpu(int reg, u64 *val)
-{
-	/*
-	 * *** VHE ONLY ***
-	 *
-	 * System registers listed in the switch are not saved on every
-	 * exit from the guest but are only saved on vcpu_put.
-	 *
-	 * Note that MPIDR_EL1 for the guest is set by KVM via VMPIDR_EL2 but
-	 * should never be listed below, because the guest cannot modify its
-	 * own MPIDR_EL1 and MPIDR_EL1 is accessed for VCPU A from VCPU B's
-	 * thread when emulating cross-VCPU communication.
-	 */
-	if (!has_vhe())
-		return false;
-
-	switch (reg) {
-	case SCTLR_EL1:		*val = read_sysreg_s(SYS_SCTLR_EL12);	break;
-	case CPACR_EL1:		*val = read_sysreg_s(SYS_CPACR_EL12);	break;
-	case TTBR0_EL1:		*val = read_sysreg_s(SYS_TTBR0_EL12);	break;
-	case TTBR1_EL1:		*val = read_sysreg_s(SYS_TTBR1_EL12);	break;
-	case TCR_EL1:		*val = read_sysreg_s(SYS_TCR_EL12);	break;
-	case TCR2_EL1:		*val = read_sysreg_s(SYS_TCR2_EL12);	break;
-	case PIR_EL1:		*val = read_sysreg_s(SYS_PIR_EL12);	break;
-	case PIRE0_EL1:		*val = read_sysreg_s(SYS_PIRE0_EL12);	break;
-	case POR_EL1:		*val = read_sysreg_s(SYS_POR_EL12);	break;
-	case ESR_EL1:		*val = read_sysreg_s(SYS_ESR_EL12);	break;
-	case AFSR0_EL1:		*val = read_sysreg_s(SYS_AFSR0_EL12);	break;
-	case AFSR1_EL1:		*val = read_sysreg_s(SYS_AFSR1_EL12);	break;
-	case FAR_EL1:		*val = read_sysreg_s(SYS_FAR_EL12);	break;
-	case MAIR_EL1:		*val = read_sysreg_s(SYS_MAIR_EL12);	break;
-	case VBAR_EL1:		*val = read_sysreg_s(SYS_VBAR_EL12);	break;
-	case CONTEXTIDR_EL1:	*val = read_sysreg_s(SYS_CONTEXTIDR_EL12);break;
-	case TPIDR_EL0:		*val = read_sysreg_s(SYS_TPIDR_EL0);	break;
-	case TPIDRRO_EL0:	*val = read_sysreg_s(SYS_TPIDRRO_EL0);	break;
-	case TPIDR_EL1:		*val = read_sysreg_s(SYS_TPIDR_EL1);	break;
-	case AMAIR_EL1:		*val = read_sysreg_s(SYS_AMAIR_EL12);	break;
-	case CNTKCTL_EL1:	*val = read_sysreg_s(SYS_CNTKCTL_EL12);	break;
-	case ELR_EL1:		*val = read_sysreg_s(SYS_ELR_EL12);	break;
-	case SPSR_EL1:		*val = read_sysreg_s(SYS_SPSR_EL12);	break;
-	case PAR_EL1:		*val = read_sysreg_par();		break;
-	case DACR32_EL2:	*val = read_sysreg_s(SYS_DACR32_EL2);	break;
-	case IFSR32_EL2:	*val = read_sysreg_s(SYS_IFSR32_EL2);	break;
-	case DBGVCR32_EL2:	*val = read_sysreg_s(SYS_DBGVCR32_EL2);	break;
-	case ZCR_EL1:		*val = read_sysreg_s(SYS_ZCR_EL12);	break;
-	default:		return false;
-	}
-
-	return true;
-}
+			__v = kvm_vcpu_apply_reg_masks((v), (r), __v);	\
+									\
+		ctxt_sys_reg(ctxt, (r)) = __v;				\
+	} while (0)
 
-static inline bool __vcpu_write_sys_reg_to_cpu(u64 val, int reg)
-{
-	/*
-	 * *** VHE ONLY ***
-	 *
-	 * System registers listed in the switch are not restored on every
-	 * entry to the guest but are only restored on vcpu_load.
-	 *
-	 * Note that MPIDR_EL1 for the guest is set by KVM via VMPIDR_EL2 but
-	 * should never be listed below, because the MPIDR should only be set
-	 * once, before running the VCPU, and never changed later.
-	 */
-	if (!has_vhe())
-		return false;
+#define __vcpu_rmw_sys_reg(v, r, op, val)				\
+	do {								\
+		const struct kvm_cpu_context *ctxt = &(v)->arch.ctxt;	\
+		u64 __v = ctxt_sys_reg(ctxt, (r));			\
+		__v op (val);						\
+		if (vcpu_has_nv((v)) && (r) >= __SANITISED_REG_START__)	\
+			__v = kvm_vcpu_apply_reg_masks((v), (r), __v);	\
+									\
+		ctxt_sys_reg(ctxt, (r)) = __v;				\
+	} while (0)
 
-	switch (reg) {
-	case SCTLR_EL1:		write_sysreg_s(val, SYS_SCTLR_EL12);	break;
-	case CPACR_EL1:		write_sysreg_s(val, SYS_CPACR_EL12);	break;
-	case TTBR0_EL1:		write_sysreg_s(val, SYS_TTBR0_EL12);	break;
-	case TTBR1_EL1:		write_sysreg_s(val, SYS_TTBR1_EL12);	break;
-	case TCR_EL1:		write_sysreg_s(val, SYS_TCR_EL12);	break;
-	case TCR2_EL1:		write_sysreg_s(val, SYS_TCR2_EL12);	break;
-	case PIR_EL1:		write_sysreg_s(val, SYS_PIR_EL12);	break;
-	case PIRE0_EL1:		write_sysreg_s(val, SYS_PIRE0_EL12);	break;
-	case POR_EL1:		write_sysreg_s(val, SYS_POR_EL12);	break;
-	case ESR_EL1:		write_sysreg_s(val, SYS_ESR_EL12);	break;
-	case AFSR0_EL1:		write_sysreg_s(val, SYS_AFSR0_EL12);	break;
-	case AFSR1_EL1:		write_sysreg_s(val, SYS_AFSR1_EL12);	break;
-	case FAR_EL1:		write_sysreg_s(val, SYS_FAR_EL12);	break;
-	case MAIR_EL1:		write_sysreg_s(val, SYS_MAIR_EL12);	break;
-	case VBAR_EL1:		write_sysreg_s(val, SYS_VBAR_EL12);	break;
-	case CONTEXTIDR_EL1:	write_sysreg_s(val, SYS_CONTEXTIDR_EL12);break;
-	case TPIDR_EL0:		write_sysreg_s(val, SYS_TPIDR_EL0);	break;
-	case TPIDRRO_EL0:	write_sysreg_s(val, SYS_TPIDRRO_EL0);	break;
-	case TPIDR_EL1:		write_sysreg_s(val, SYS_TPIDR_EL1);	break;
-	case AMAIR_EL1:		write_sysreg_s(val, SYS_AMAIR_EL12);	break;
-	case CNTKCTL_EL1:	write_sysreg_s(val, SYS_CNTKCTL_EL12);	break;
-	case ELR_EL1:		write_sysreg_s(val, SYS_ELR_EL12);	break;
-	case SPSR_EL1:		write_sysreg_s(val, SYS_SPSR_EL12);	break;
-	case PAR_EL1:		write_sysreg_s(val, SYS_PAR_EL1);	break;
-	case DACR32_EL2:	write_sysreg_s(val, SYS_DACR32_EL2);	break;
-	case IFSR32_EL2:	write_sysreg_s(val, SYS_IFSR32_EL2);	break;
-	case DBGVCR32_EL2:	write_sysreg_s(val, SYS_DBGVCR32_EL2);	break;
-	case ZCR_EL1:		write_sysreg_s(val, SYS_ZCR_EL12);	break;
-	default:		return false;
-	}
+#define __vcpu_sys_reg(v,r)						\
+	({								\
+		const struct kvm_cpu_context *ctxt = &(v)->arch.ctxt;	\
+		u64 __v = ctxt_sys_reg(ctxt, (r));			\
+		if (vcpu_has_nv((v)) && (r) >= __SANITISED_REG_START__)	\
+			__v = kvm_vcpu_apply_reg_masks((v), (r), __v);	\
+		__v;							\
+	})
 
-	return true;
-}
+u64 vcpu_read_sys_reg(const struct kvm_vcpu *, enum vcpu_sysreg);
+void vcpu_write_sys_reg(struct kvm_vcpu *, u64, enum vcpu_sysreg);
 
 struct kvm_vm_stat {
 	struct kvm_vm_stat_generic generic;
@@ -1172,9 +1219,8 @@ void kvm_arm_resume_guest(struct kvm *kvm);
 	})
 
 /*
- * The couple of isb() below are there to guarantee the same behaviour
- * on VHE as on !VHE, where the eret to EL1 acts as a context
- * synchronization event.
+ * The isb() below is there to guarantee the same behaviour on VHE as on !VHE,
+ * where the eret to EL1 acts as a context synchronization event.
  */
 #define kvm_call_hyp(f, ...)						\
 	do {								\
@@ -1192,7 +1238,6 @@ void kvm_arm_resume_guest(struct kvm *kvm);
 									\
 		if (has_vhe()) {					\
 			ret = f(__VA_ARGS__);				\
-			isb();						\
 		} else {						\
 			ret = kvm_call_hyp_nvhe(f, ##__VA_ARGS__);	\
 		}							\
@@ -1225,9 +1270,6 @@ int __init populate_sysreg_config(const struct sys_reg_desc *sr,
 				  unsigned int idx);
 int __init populate_nv_trap_config(void);
 
-bool lock_all_vcpus(struct kvm *kvm);
-void unlock_all_vcpus(struct kvm *kvm);
-
 void kvm_calculate_traps(struct kvm_vcpu *vcpu);
 
 /* MMIO helpers */
@@ -1262,7 +1304,7 @@ int kvm_arm_pvtime_has_attr(struct kvm_vcpu *vcpu,
 extern unsigned int __ro_after_init kvm_arm_vmid_bits;
 int __init kvm_arm_vmid_alloc_init(void);
 void __init kvm_arm_vmid_alloc_free(void);
-bool kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid);
+void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid);
 void kvm_arm_vmid_clear_active(void);
 
 static inline void kvm_arm_pvtime_vcpu_init(struct kvm_vcpu_arch *vcpu_arch)
@@ -1275,8 +1317,6 @@ static inline bool kvm_arm_is_pvtime_enabled(struct kvm_vcpu_arch *vcpu_arch)
 	return (vcpu_arch->steal.base != INVALID_GPA);
 }
 
-void kvm_set_sei_esr(struct kvm_vcpu *vcpu, u64 syndrome);
-
 struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
 
 DECLARE_KVM_HYP_PER_CPU(struct kvm_host_data, kvm_host_data);
@@ -1307,6 +1347,13 @@ DECLARE_KVM_HYP_PER_CPU(struct kvm_host_data, kvm_host_data);
 	 &this_cpu_ptr_hyp_sym(kvm_host_data)->f)
 #endif
 
+#define host_data_test_flag(flag)					\
+	(test_bit(KVM_HOST_DATA_FLAG_##flag, host_data_ptr(flags)))
+#define host_data_set_flag(flag)					\
+	set_bit(KVM_HOST_DATA_FLAG_##flag, host_data_ptr(flags))
+#define host_data_clear_flag(flag)					\
+	clear_bit(KVM_HOST_DATA_FLAG_##flag, host_data_ptr(flags))
+
 /* Check whether the FP regs are owned by the guest */
 static inline bool guest_owns_fp_regs(void)
 {
@@ -1330,17 +1377,23 @@ static inline bool kvm_system_needs_idmapped_vectors(void)
 	return cpus_have_final_cap(ARM64_SPECTRE_V3A);
 }
 
-static inline void kvm_arch_sync_events(struct kvm *kvm) {}
-
-void kvm_arm_init_debug(void);
-void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu);
-void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
-void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
-void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu);
+void kvm_init_host_debug_data(void);
+void kvm_debug_init_vhe(void);
+void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu);
+void kvm_vcpu_put_debug(struct kvm_vcpu *vcpu);
+void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu);
+void kvm_debug_handle_oslar(struct kvm_vcpu *vcpu, u64 val);
 
 #define kvm_vcpu_os_lock_enabled(vcpu)		\
 	(!!(__vcpu_sys_reg(vcpu, OSLSR_EL1) & OSLSR_EL1_OSLK))
 
+#define kvm_debug_regs_in_use(vcpu)		\
+	((vcpu)->arch.debug_owner != VCPU_DEBUG_FREE)
+#define kvm_host_owns_debug_regs(vcpu)		\
+	((vcpu)->arch.debug_owner == VCPU_DEBUG_HOST_OWNED)
+#define kvm_guest_owns_debug_regs(vcpu)		\
+	((vcpu)->arch.debug_owner == VCPU_DEBUG_GUEST_OWNED)
+
 int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
 			       struct kvm_device_attr *attr);
 int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
@@ -1356,7 +1409,6 @@ int kvm_vm_ioctl_get_reg_writable_masks(struct kvm *kvm,
 					struct reg_mask_range *range);
 
 /* Guest/host FPSIMD coordination helpers */
-int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu);
 void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu);
 void kvm_arch_vcpu_ctxflush_fp(struct kvm_vcpu *vcpu);
 void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu);
@@ -1367,14 +1419,13 @@ static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr)
 	return (!has_vhe() && attr->exclude_host);
 }
 
-/* Flags for host debug state */
-void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu);
-void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu);
-
 #ifdef CONFIG_KVM
 void kvm_set_pmu_events(u64 set, struct perf_event_attr *attr);
 void kvm_clr_pmu_events(u64 clr);
 bool kvm_set_pmuserenr(u64 val);
+void kvm_enable_trbe(void);
+void kvm_disable_trbe(void);
+void kvm_tracing_set_el1_configuration(u64 trfcr_while_in_guest);
 #else
 static inline void kvm_set_pmu_events(u64 set, struct perf_event_attr *attr) {}
 static inline void kvm_clr_pmu_events(u64 clr) {}
@@ -1382,6 +1433,9 @@ static inline bool kvm_set_pmuserenr(u64 val)
 {
 	return false;
 }
+static inline void kvm_enable_trbe(void) {}
+static inline void kvm_disable_trbe(void) {}
+static inline void kvm_tracing_set_el1_configuration(u64 trfcr_while_in_guest) {}
 #endif
 
 void kvm_vcpu_load_vhe(struct kvm_vcpu *vcpu);
@@ -1397,7 +1451,7 @@ struct kvm *kvm_arch_alloc_vm(void);
 
 #define __KVM_HAVE_ARCH_FLUSH_REMOTE_TLBS_RANGE
 
-#define kvm_vm_is_protected(kvm)	(is_protected_kvm_enabled() && (kvm)->arch.pkvm.enabled)
+#define kvm_vm_is_protected(kvm)	(is_protected_kvm_enabled() && (kvm)->arch.pkvm.is_protected)
 
 #define vcpu_is_protected(vcpu)		kvm_vm_is_protected((vcpu)->kvm)
 
@@ -1422,6 +1476,7 @@ static inline bool __vcpu_has_feature(const struct kvm_arch *ka, int feature)
 	return test_bit(feature, ka->vcpu_features);
 }
 
+#define kvm_vcpu_has_feature(k, f)	__vcpu_has_feature(&(k)->arch, (f))
 #define vcpu_has_feature(v, f)	__vcpu_has_feature(&(v)->kvm->arch, (f))
 
 #define kvm_vcpu_initialized(v) vcpu_get_flag(vcpu, VCPU_INITIALIZED)
@@ -1445,6 +1500,12 @@ static inline u64 *__vm_id_reg(struct kvm_arch *ka, u32 reg)
 		return &ka->id_regs[IDREG_IDX(reg)];
 	case SYS_CTR_EL0:
 		return &ka->ctr_el0;
+	case SYS_MIDR_EL1:
+		return &ka->midr_el1;
+	case SYS_REVIDR_EL1:
+		return &ka->revidr_el1;
+	case SYS_AIDR_EL1:
+		return &ka->aidr_el1;
 	default:
 		WARN_ON_ONCE(1);
 		return NULL;
@@ -1491,12 +1552,16 @@ void kvm_set_vm_id_reg(struct kvm *kvm, u32 reg, u64 val);
 	 kvm_cmp_feat_signed(kvm, id, fld, op, limit) :			\
 	 kvm_cmp_feat_unsigned(kvm, id, fld, op, limit))
 
-#define kvm_has_feat(kvm, id, fld, limit)				\
+#define __kvm_has_feat(kvm, id, fld, limit)				\
 	kvm_cmp_feat(kvm, id, fld, >=, limit)
 
-#define kvm_has_feat_enum(kvm, id, fld, val)				\
+#define kvm_has_feat(kvm, ...) __kvm_has_feat(kvm, __VA_ARGS__)
+
+#define __kvm_has_feat_enum(kvm, id, fld, val)				\
 	kvm_cmp_feat_unsigned(kvm, id, fld, ==, val)
 
+#define kvm_has_feat_enum(kvm, ...) __kvm_has_feat_enum(kvm, __VA_ARGS__)
+
 #define kvm_has_feat_range(kvm, id, fld, min, max)			\
 	(kvm_cmp_feat(kvm, id, fld, >=, min) &&				\
 	kvm_cmp_feat(kvm, id, fld, <=, max))
@@ -1529,4 +1594,65 @@ void kvm_set_vm_id_reg(struct kvm *kvm, u32 reg, u64 val);
 #define kvm_has_s1poe(k)				\
 	(kvm_has_feat((k), ID_AA64MMFR3_EL1, S1POE, IMP))
 
+#define kvm_has_ras(k)					\
+	(kvm_has_feat((k), ID_AA64PFR0_EL1, RAS, IMP))
+
+#define kvm_has_sctlr2(k)				\
+	(kvm_has_feat((k), ID_AA64MMFR3_EL1, SCTLRX, IMP))
+
+static inline bool kvm_arch_has_irq_bypass(void)
+{
+	return true;
+}
+
+void compute_fgu(struct kvm *kvm, enum fgt_group_id fgt);
+void get_reg_fixed_bits(struct kvm *kvm, enum vcpu_sysreg reg, u64 *res0, u64 *res1);
+void check_feature_map(void);
+void kvm_vcpu_load_fgt(struct kvm_vcpu *vcpu);
+
+static __always_inline enum fgt_group_id __fgt_reg_to_group_id(enum vcpu_sysreg reg)
+{
+	switch (reg) {
+	case HFGRTR_EL2:
+	case HFGWTR_EL2:
+		return HFGRTR_GROUP;
+	case HFGITR_EL2:
+		return HFGITR_GROUP;
+	case HDFGRTR_EL2:
+	case HDFGWTR_EL2:
+		return HDFGRTR_GROUP;
+	case HAFGRTR_EL2:
+		return HAFGRTR_GROUP;
+	case HFGRTR2_EL2:
+	case HFGWTR2_EL2:
+		return HFGRTR2_GROUP;
+	case HFGITR2_EL2:
+		return HFGITR2_GROUP;
+	case HDFGRTR2_EL2:
+	case HDFGWTR2_EL2:
+		return HDFGRTR2_GROUP;
+	default:
+		BUILD_BUG_ON(1);
+	}
+}
+
+#define vcpu_fgt(vcpu, reg)						\
+	({								\
+		enum fgt_group_id id = __fgt_reg_to_group_id(reg);	\
+		u64 *p;							\
+		switch (reg) {						\
+		case HFGWTR_EL2:					\
+		case HDFGWTR_EL2:					\
+		case HFGWTR2_EL2:					\
+		case HDFGWTR2_EL2:					\
+			p = &(vcpu)->arch.fgt[id].w;			\
+			break;						\
+		default:						\
+			p = &(vcpu)->arch.fgt[id].r;			\
+			break;						\
+		}							\
+									\
+		p;							\
+	})
+
 #endif /* __ARM64_KVM_HOST_H__ */
diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h
index c838309e4ec4..76ce2b94bd97 100644
--- a/arch/arm64/include/asm/kvm_hyp.h
+++ b/arch/arm64/include/asm/kvm_hyp.h
@@ -76,11 +76,14 @@ DECLARE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
 
 int __vgic_v2_perform_cpuif_access(struct kvm_vcpu *vcpu);
 
+u64 __gic_v3_get_lr(unsigned int lr);
+void __gic_v3_set_lr(u64 val, int lr);
+
 void __vgic_v3_save_state(struct vgic_v3_cpu_if *cpu_if);
 void __vgic_v3_restore_state(struct vgic_v3_cpu_if *cpu_if);
 void __vgic_v3_activate_traps(struct vgic_v3_cpu_if *cpu_if);
 void __vgic_v3_deactivate_traps(struct vgic_v3_cpu_if *cpu_if);
-void __vgic_v3_save_vmcr_aprs(struct vgic_v3_cpu_if *cpu_if);
+void __vgic_v3_save_aprs(struct vgic_v3_cpu_if *cpu_if);
 void __vgic_v3_restore_vmcr_aprs(struct vgic_v3_cpu_if *cpu_if);
 int __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu);
 
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index 66d93e320ec8..2dc5e6e742bb 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -49,7 +49,7 @@
  * mappings, and none of this applies in that case.
  */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #include <asm/alternative.h>
 
@@ -139,6 +139,8 @@ static __always_inline unsigned long __kern_hyp_va(unsigned long v)
 
 #define kern_hyp_va(v) 	((typeof(v))(__kern_hyp_va((unsigned long)(v))))
 
+extern u32 __hyp_va_bits;
+
 /*
  * We currently support using a VM-specified IPA size. For backward
  * compatibility, the default IPA size is fixed to 40bits.
@@ -178,6 +180,7 @@ void kvm_free_stage2_pgd(struct kvm_s2_mmu *mmu);
 int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
 			  phys_addr_t pa, unsigned long size, bool writable);
 
+int kvm_handle_guest_sea(struct kvm_vcpu *vcpu);
 int kvm_handle_guest_abort(struct kvm_vcpu *vcpu);
 
 phys_addr_t kvm_mmu_get_httbr(void);
@@ -353,11 +356,45 @@ static inline bool kvm_is_nested_s2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu)
 	return &kvm->arch.mmu != mmu;
 }
 
+static inline void kvm_fault_lock(struct kvm *kvm)
+{
+	if (is_protected_kvm_enabled())
+		write_lock(&kvm->mmu_lock);
+	else
+		read_lock(&kvm->mmu_lock);
+}
+
+static inline void kvm_fault_unlock(struct kvm *kvm)
+{
+	if (is_protected_kvm_enabled())
+		write_unlock(&kvm->mmu_lock);
+	else
+		read_unlock(&kvm->mmu_lock);
+}
+
+/*
+ * ARM64 KVM relies on a simple conversion from physaddr to a kernel
+ * virtual address (KVA) when it does cache maintenance as the CMO
+ * instructions work on virtual addresses. This is incompatible with
+ * VM_PFNMAP VMAs which may not have a kernel direct mapping to a
+ * virtual address.
+ *
+ * With S2FWB and CACHE DIC features, KVM need not do cache flushing
+ * and CMOs are NOP'd. This has the effect of no longer requiring a
+ * KVA for addresses mapped into the S2. The presence of these features
+ * are thus necessary to support cacheable S2 mapping of VM_PFNMAP.
+ */
+static inline bool kvm_supports_cacheable_pfnmap(void)
+{
+	return cpus_have_final_cap(ARM64_HAS_STAGE2_FWB) &&
+	       cpus_have_final_cap(ARM64_HAS_CACHE_DIC);
+}
+
 #ifdef CONFIG_PTDUMP_STAGE2_DEBUGFS
 void kvm_s2_ptdump_create_debugfs(struct kvm *kvm);
 #else
 static inline void kvm_s2_ptdump_create_debugfs(struct kvm *kvm) {}
 #endif /* CONFIG_PTDUMP_STAGE2_DEBUGFS */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ARM64_KVM_MMU_H__ */
diff --git a/arch/arm64/include/asm/kvm_mte.h b/arch/arm64/include/asm/kvm_mte.h
index de002636eb1f..3171963ad25c 100644
--- a/arch/arm64/include/asm/kvm_mte.h
+++ b/arch/arm64/include/asm/kvm_mte.h
@@ -5,7 +5,7 @@
 #ifndef __ASM_KVM_MTE_H
 #define __ASM_KVM_MTE_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #include <asm/sysreg.h>
 
@@ -62,5 +62,5 @@ alternative_else_nop_endif
 .endm
 
 #endif /* CONFIG_ARM64_MTE */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ASM_KVM_MTE_H */
diff --git a/arch/arm64/include/asm/kvm_nested.h b/arch/arm64/include/asm/kvm_nested.h
index 233e65522716..905c658057a4 100644
--- a/arch/arm64/include/asm/kvm_nested.h
+++ b/arch/arm64/include/asm/kvm_nested.h
@@ -33,14 +33,14 @@ static inline u64 translate_tcr_el2_to_tcr_el1(u64 tcr)
 
 static inline u64 translate_cptr_el2_to_cpacr_el1(u64 cptr_el2)
 {
-	u64 cpacr_el1 = CPACR_ELx_RES1;
+	u64 cpacr_el1 = CPACR_EL1_RES1;
 
 	if (cptr_el2 & CPTR_EL2_TTA)
-		cpacr_el1 |= CPACR_ELx_TTA;
+		cpacr_el1 |= CPACR_EL1_TTA;
 	if (!(cptr_el2 & CPTR_EL2_TFP))
-		cpacr_el1 |= CPACR_ELx_FPEN;
+		cpacr_el1 |= CPACR_EL1_FPEN;
 	if (!(cptr_el2 & CPTR_EL2_TZ))
-		cpacr_el1 |= CPACR_ELx_ZEN;
+		cpacr_el1 |= CPACR_EL1_ZEN;
 
 	cpacr_el1 |= cptr_el2 & (CPTR_EL2_TCPAC | CPTR_EL2_TAM);
 
@@ -64,6 +64,7 @@ static inline u64 translate_ttbr0_el2_to_ttbr0_el1(u64 ttbr0)
 }
 
 extern bool forward_smc_trap(struct kvm_vcpu *vcpu);
+extern bool forward_debug_exception(struct kvm_vcpu *vcpu);
 extern void kvm_init_nested(struct kvm *kvm);
 extern int kvm_vcpu_init_nested(struct kvm_vcpu *vcpu);
 extern void kvm_init_nested_s2_mmu(struct kvm_s2_mmu *mmu);
@@ -79,6 +80,10 @@ extern void kvm_vcpu_load_hw_mmu(struct kvm_vcpu *vcpu);
 extern void kvm_vcpu_put_hw_mmu(struct kvm_vcpu *vcpu);
 
 extern void check_nested_vcpu_requests(struct kvm_vcpu *vcpu);
+extern void kvm_nested_flush_hwstate(struct kvm_vcpu *vcpu);
+extern void kvm_nested_sync_hwstate(struct kvm_vcpu *vcpu);
+
+extern void kvm_nested_setup_mdcr_el2(struct kvm_vcpu *vcpu);
 
 struct kvm_s2_trans {
 	phys_addr_t output;
@@ -115,9 +120,42 @@ static inline bool kvm_s2_trans_writable(struct kvm_s2_trans *trans)
 	return trans->writable;
 }
 
-static inline bool kvm_s2_trans_executable(struct kvm_s2_trans *trans)
+static inline bool kvm_has_xnx(struct kvm *kvm)
+{
+	return cpus_have_final_cap(ARM64_HAS_XNX) &&
+		kvm_has_feat(kvm, ID_AA64MMFR1_EL1, XNX, IMP);
+}
+
+static inline bool kvm_s2_trans_exec_el0(struct kvm *kvm, struct kvm_s2_trans *trans)
+{
+	u8 xn = FIELD_GET(KVM_PTE_LEAF_ATTR_HI_S2_XN, trans->desc);
+
+	if (!kvm_has_xnx(kvm))
+		xn &= FIELD_PREP(KVM_PTE_LEAF_ATTR_HI_S2_XN, 0b10);
+
+	switch (xn) {
+	case 0b00:
+	case 0b01:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static inline bool kvm_s2_trans_exec_el1(struct kvm *kvm, struct kvm_s2_trans *trans)
 {
-	return !(trans->desc & BIT(54));
+	u8 xn = FIELD_GET(KVM_PTE_LEAF_ATTR_HI_S2_XN, trans->desc);
+
+	if (!kvm_has_xnx(kvm))
+		xn &= FIELD_PREP(KVM_PTE_LEAF_ATTR_HI_S2_XN, 0b10);
+
+	switch (xn) {
+	case 0b00:
+	case 0b11:
+		return true;
+	default:
+		return false;
+	}
 }
 
 extern int kvm_walk_nested_s2(struct kvm_vcpu *vcpu, phys_addr_t gipa,
@@ -186,7 +224,8 @@ static inline bool kvm_supported_tlbi_s1e2_op(struct kvm_vcpu *vpcu, u32 instr)
 	return true;
 }
 
-int kvm_init_nv_sysregs(struct kvm *kvm);
+int kvm_init_nv_sysregs(struct kvm_vcpu *vcpu);
+u64 limit_nv_id_reg(struct kvm *kvm, u32 reg, u64 val);
 
 #ifdef CONFIG_ARM64_PTR_AUTH
 bool kvm_auth_eretax(struct kvm_vcpu *vcpu, u64 *elr);
@@ -229,7 +268,39 @@ static inline u64 kvm_encode_nested_level(struct kvm_s2_trans *trans)
 		shift;							\
 	})
 
-static inline unsigned int ps_to_output_size(unsigned int ps)
+static inline u64 decode_range_tlbi(u64 val, u64 *range, u16 *asid)
+{
+	u64 base, tg, num, scale;
+	int shift;
+
+	tg	= FIELD_GET(GENMASK(47, 46), val);
+
+	switch(tg) {
+	case 1:
+		shift = 12;
+		break;
+	case 2:
+		shift = 14;
+		break;
+	case 3:
+	default:		/* IMPDEF: handle tg==0 as 64k */
+		shift = 16;
+		break;
+	}
+
+	base	= (val & GENMASK(36, 0)) << shift;
+
+	if (asid)
+		*asid = FIELD_GET(TLBIR_ASID_MASK, val);
+
+	scale	= FIELD_GET(GENMASK(45, 44), val);
+	num	= FIELD_GET(GENMASK(43, 39), val);
+	*range	= __TLBI_RANGE_PAGES(num, scale) << shift;
+
+	return base;
+}
+
+static inline unsigned int ps_to_output_size(unsigned int ps, bool pa52bit)
 {
 	switch (ps) {
 	case 0: return 32;
@@ -237,10 +308,102 @@ static inline unsigned int ps_to_output_size(unsigned int ps)
 	case 2: return 40;
 	case 3: return 42;
 	case 4: return 44;
-	case 5:
+	case 5: return 48;
+	case 6: if (pa52bit)
+			return 52;
+		fallthrough;
 	default:
 		return 48;
 	}
 }
 
+enum trans_regime {
+	TR_EL10,
+	TR_EL20,
+	TR_EL2,
+};
+
+struct s1_walk_info;
+
+struct s1_walk_context {
+	struct s1_walk_info	*wi;
+	u64			table_ipa;
+	int			level;
+};
+
+struct s1_walk_filter {
+	int	(*fn)(struct s1_walk_context *, void *);
+	void	*priv;
+};
+
+struct s1_walk_info {
+	struct s1_walk_filter	*filter;
+	u64	     		baddr;
+	enum trans_regime	regime;
+	unsigned int		max_oa_bits;
+	unsigned int		pgshift;
+	unsigned int		txsz;
+	int 	     		sl;
+	u8			sh;
+	bool			as_el0;
+	bool	     		hpd;
+	bool			e0poe;
+	bool			poe;
+	bool			pan;
+	bool	     		be;
+	bool	     		s2;
+	bool			pa52bit;
+	bool			ha;
+};
+
+struct s1_walk_result {
+	union {
+		struct {
+			u64	desc;
+			u64	pa;
+			s8	level;
+			u8	APTable;
+			bool	nG;
+			u16	asid;
+			bool	UXNTable;
+			bool	PXNTable;
+			bool	uwxn;
+			bool	uov;
+			bool	ur;
+			bool	uw;
+			bool	ux;
+			bool	pwxn;
+			bool	pov;
+			bool	pr;
+			bool	pw;
+			bool	px;
+		};
+		struct {
+			u8	fst;
+			bool	ptw;
+			bool	s2;
+		};
+	};
+	bool	failed;
+};
+
+int __kvm_translate_va(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
+		       struct s1_walk_result *wr, u64 va);
+int __kvm_find_s1_desc_level(struct kvm_vcpu *vcpu, u64 va, u64 ipa,
+			     int *level);
+
+/* VNCR management */
+int kvm_vcpu_allocate_vncr_tlb(struct kvm_vcpu *vcpu);
+int kvm_handle_vncr_abort(struct kvm_vcpu *vcpu);
+void kvm_handle_s1e2_tlbi(struct kvm_vcpu *vcpu, u32 inst, u64 val);
+
+#define vncr_fixmap(c)						\
+	({							\
+		u32 __c = (c);					\
+		BUG_ON(__c >= NR_CPUS);				\
+		(FIX_VNCR - __c);				\
+	})
+
+int __kvm_at_swap_desc(struct kvm *kvm, gpa_t ipa, u64 old, u64 new);
+
 #endif /* __ARM64_KVM_NESTED_H */
diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h
index aab04097b505..fc02de43c68d 100644
--- a/arch/arm64/include/asm/kvm_pgtable.h
+++ b/arch/arm64/include/asm/kvm_pgtable.h
@@ -59,6 +59,11 @@ typedef u64 kvm_pte_t;
 
 #define KVM_PHYS_INVALID		(-1ULL)
 
+#define KVM_PTE_TYPE			BIT(1)
+#define KVM_PTE_TYPE_BLOCK		0
+#define KVM_PTE_TYPE_PAGE		1
+#define KVM_PTE_TYPE_TABLE		1
+
 #define KVM_PTE_LEAF_ATTR_LO		GENMASK(11, 2)
 
 #define KVM_PTE_LEAF_ATTR_LO_S1_ATTRIDX	GENMASK(4, 2)
@@ -84,7 +89,7 @@ typedef u64 kvm_pte_t;
 
 #define KVM_PTE_LEAF_ATTR_HI_S1_XN	BIT(54)
 
-#define KVM_PTE_LEAF_ATTR_HI_S2_XN	BIT(54)
+#define KVM_PTE_LEAF_ATTR_HI_S2_XN	GENMASK(54, 53)
 
 #define KVM_PTE_LEAF_ATTR_HI_S1_GP	BIT(50)
 
@@ -235,7 +240,9 @@ enum kvm_pgtable_stage2_flags {
 
 /**
  * enum kvm_pgtable_prot - Page-table permissions and attributes.
- * @KVM_PGTABLE_PROT_X:		Execute permission.
+ * @KVM_PGTABLE_PROT_UX:	Unprivileged execute permission.
+ * @KVM_PGTABLE_PROT_PX:	Privileged execute permission.
+ * @KVM_PGTABLE_PROT_X:		Privileged and unprivileged execute permission.
  * @KVM_PGTABLE_PROT_W:		Write permission.
  * @KVM_PGTABLE_PROT_R:		Read permission.
  * @KVM_PGTABLE_PROT_DEVICE:	Device attributes.
@@ -246,12 +253,15 @@ enum kvm_pgtable_stage2_flags {
  * @KVM_PGTABLE_PROT_SW3:	Software bit 3.
  */
 enum kvm_pgtable_prot {
-	KVM_PGTABLE_PROT_X			= BIT(0),
-	KVM_PGTABLE_PROT_W			= BIT(1),
-	KVM_PGTABLE_PROT_R			= BIT(2),
+	KVM_PGTABLE_PROT_PX			= BIT(0),
+	KVM_PGTABLE_PROT_UX			= BIT(1),
+	KVM_PGTABLE_PROT_X			= KVM_PGTABLE_PROT_PX	|
+						  KVM_PGTABLE_PROT_UX,
+	KVM_PGTABLE_PROT_W			= BIT(2),
+	KVM_PGTABLE_PROT_R			= BIT(3),
 
-	KVM_PGTABLE_PROT_DEVICE			= BIT(3),
-	KVM_PGTABLE_PROT_NORMAL_NC		= BIT(4),
+	KVM_PGTABLE_PROT_DEVICE			= BIT(4),
+	KVM_PGTABLE_PROT_NORMAL_NC		= BIT(5),
 
 	KVM_PGTABLE_PROT_SW0			= BIT(55),
 	KVM_PGTABLE_PROT_SW1			= BIT(56),
@@ -350,6 +360,11 @@ static inline kvm_pte_t *kvm_dereference_pteref(struct kvm_pgtable_walker *walke
 	return pteref;
 }
 
+static inline kvm_pte_t *kvm_dereference_pteref_raw(kvm_pteref_t pteref)
+{
+	return pteref;
+}
+
 static inline int kvm_pgtable_walk_begin(struct kvm_pgtable_walker *walker)
 {
 	/*
@@ -379,6 +394,11 @@ static inline kvm_pte_t *kvm_dereference_pteref(struct kvm_pgtable_walker *walke
 	return rcu_dereference_check(pteref, !(walker->flags & KVM_PGTABLE_WALK_SHARED));
 }
 
+static inline kvm_pte_t *kvm_dereference_pteref_raw(kvm_pteref_t pteref)
+{
+	return rcu_dereference_raw(pteref);
+}
+
 static inline int kvm_pgtable_walk_begin(struct kvm_pgtable_walker *walker)
 {
 	if (walker->flags & KVM_PGTABLE_WALK_SHARED)
@@ -412,15 +432,20 @@ static inline bool kvm_pgtable_walk_lock_held(void)
  *			be used instead of block mappings.
  */
 struct kvm_pgtable {
-	u32					ia_bits;
-	s8					start_level;
-	kvm_pteref_t				pgd;
-	struct kvm_pgtable_mm_ops		*mm_ops;
-
-	/* Stage-2 only */
-	struct kvm_s2_mmu			*mmu;
-	enum kvm_pgtable_stage2_flags		flags;
-	kvm_pgtable_force_pte_cb_t		force_pte_cb;
+	union {
+		struct rb_root_cached				pkvm_mappings;
+		struct {
+			u32					ia_bits;
+			s8					start_level;
+			kvm_pteref_t				pgd;
+			struct kvm_pgtable_mm_ops		*mm_ops;
+
+			/* Stage-2 only */
+			enum kvm_pgtable_stage2_flags		flags;
+			kvm_pgtable_force_pte_cb_t		force_pte_cb;
+		};
+	};
+	struct kvm_s2_mmu					*mmu;
 };
 
 /**
@@ -526,8 +551,11 @@ int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
 			      enum kvm_pgtable_stage2_flags flags,
 			      kvm_pgtable_force_pte_cb_t force_pte_cb);
 
-#define kvm_pgtable_stage2_init(pgt, mmu, mm_ops) \
-	__kvm_pgtable_stage2_init(pgt, mmu, mm_ops, 0, NULL)
+static inline int kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
+					  struct kvm_pgtable_mm_ops *mm_ops)
+{
+	return __kvm_pgtable_stage2_init(pgt, mmu, mm_ops, 0, NULL);
+}
 
 /**
  * kvm_pgtable_stage2_destroy() - Destroy an unused guest stage-2 page-table.
@@ -539,6 +567,26 @@ int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
 void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt);
 
 /**
+ * kvm_pgtable_stage2_destroy_range() - Destroy the unlinked range of addresses.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ * @addr:      Intermediate physical address at which to place the mapping.
+ * @size:      Size of the mapping.
+ *
+ * The page-table is assumed to be unreachable by any hardware walkers prior
+ * to freeing and therefore no TLB invalidation is performed.
+ */
+void kvm_pgtable_stage2_destroy_range(struct kvm_pgtable *pgt,
+					u64 addr, u64 size);
+
+/**
+ * kvm_pgtable_stage2_destroy_pgd() - Destroy the PGD of guest stage-2 page-table.
+ * @pgt:       Page-table structure initialised by kvm_pgtable_stage2_init*().
+ *
+ * It is assumed that the rest of the page-table is freed before this operation.
+ */
+void kvm_pgtable_stage2_destroy_pgd(struct kvm_pgtable *pgt);
+
+/**
  * kvm_pgtable_stage2_free_unlinked() - Free an unlinked stage-2 paging structure.
  * @mm_ops:	Memory management callbacks.
  * @pgtable:	Unlinked stage-2 paging structure to be freed.
@@ -669,13 +717,15 @@ int kvm_pgtable_stage2_wrprotect(struct kvm_pgtable *pgt, u64 addr, u64 size);
  * kvm_pgtable_stage2_mkyoung() - Set the access flag in a page-table entry.
  * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
  * @addr:	Intermediate physical address to identify the page-table entry.
+ * @flags:	Flags to control the page-table walk (ex. a shared walk)
  *
  * The offset of @addr within a page is ignored.
  *
  * If there is a valid, leaf page-table entry used to translate @addr, then
  * set the access flag in that entry.
  */
-void kvm_pgtable_stage2_mkyoung(struct kvm_pgtable *pgt, u64 addr);
+void kvm_pgtable_stage2_mkyoung(struct kvm_pgtable *pgt, u64 addr,
+				enum kvm_pgtable_walk_flags flags);
 
 /**
  * kvm_pgtable_stage2_test_clear_young() - Test and optionally clear the access
@@ -705,6 +755,7 @@ bool kvm_pgtable_stage2_test_clear_young(struct kvm_pgtable *pgt, u64 addr,
  * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
  * @addr:	Intermediate physical address to identify the page-table entry.
  * @prot:	Additional permissions to grant for the mapping.
+ * @flags:	Flags to control the page-table walk (ex. a shared walk)
  *
  * The offset of @addr within a page is ignored.
  *
@@ -717,7 +768,8 @@ bool kvm_pgtable_stage2_test_clear_young(struct kvm_pgtable *pgt, u64 addr,
  * Return: 0 on success, negative error code on failure.
  */
 int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr,
-				   enum kvm_pgtable_prot prot);
+				   enum kvm_pgtable_prot prot,
+				   enum kvm_pgtable_walk_flags flags);
 
 /**
  * kvm_pgtable_stage2_flush_range() - Clean and invalidate data cache to Point
diff --git a/arch/arm64/include/asm/kvm_pkvm.h b/arch/arm64/include/asm/kvm_pkvm.h
index cd56acd9a842..0aecd4ac5f45 100644
--- a/arch/arm64/include/asm/kvm_pkvm.h
+++ b/arch/arm64/include/asm/kvm_pkvm.h
@@ -18,7 +18,34 @@
 
 int pkvm_init_host_vm(struct kvm *kvm);
 int pkvm_create_hyp_vm(struct kvm *kvm);
+bool pkvm_hyp_vm_is_created(struct kvm *kvm);
 void pkvm_destroy_hyp_vm(struct kvm *kvm);
+int pkvm_create_hyp_vcpu(struct kvm_vcpu *vcpu);
+
+/*
+ * This functions as an allow-list of protected VM capabilities.
+ * Features not explicitly allowed by this function are denied.
+ */
+static inline bool kvm_pvm_ext_allowed(long ext)
+{
+	switch (ext) {
+	case KVM_CAP_IRQCHIP:
+	case KVM_CAP_ARM_PSCI:
+	case KVM_CAP_ARM_PSCI_0_2:
+	case KVM_CAP_NR_VCPUS:
+	case KVM_CAP_MAX_VCPUS:
+	case KVM_CAP_MAX_VCPU_ID:
+	case KVM_CAP_MSI_DEVID:
+	case KVM_CAP_ARM_VM_IPA_SIZE:
+	case KVM_CAP_ARM_PMU_V3:
+	case KVM_CAP_ARM_SVE:
+	case KVM_CAP_ARM_PTRAUTH_ADDRESS:
+	case KVM_CAP_ARM_PTRAUTH_GENERIC:
+		return true;
+	default:
+		return false;
+	}
+}
 
 extern struct memblock_region kvm_nvhe_sym(hyp_memory)[];
 extern unsigned int kvm_nvhe_sym(hyp_memblock_nr);
@@ -109,6 +136,12 @@ static inline unsigned long host_s2_pgtable_pages(void)
 	return res;
 }
 
+#ifdef CONFIG_NVHE_EL2_DEBUG
+static inline unsigned long pkvm_selftest_pages(void) { return 32; }
+#else
+static inline unsigned long pkvm_selftest_pages(void) { return 0; }
+#endif
+
 #define KVM_FFA_MBOX_NR_PAGES	1
 
 static inline unsigned long hyp_ffa_proxy_pages(void)
@@ -137,4 +170,34 @@ static inline size_t pkvm_host_sve_state_size(void)
 			SVE_SIG_REGS_SIZE(sve_vq_from_vl(kvm_host_sve_max_vl)));
 }
 
+struct pkvm_mapping {
+	struct rb_node node;
+	u64 gfn;
+	u64 pfn;
+	u64 nr_pages;
+	u64 __subtree_last;	/* Internal member for interval tree */
+};
+
+int pkvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
+			     struct kvm_pgtable_mm_ops *mm_ops);
+void pkvm_pgtable_stage2_destroy_range(struct kvm_pgtable *pgt,
+					u64 addr, u64 size);
+void pkvm_pgtable_stage2_destroy_pgd(struct kvm_pgtable *pgt);
+int pkvm_pgtable_stage2_map(struct kvm_pgtable *pgt, u64 addr, u64 size, u64 phys,
+			    enum kvm_pgtable_prot prot, void *mc,
+			    enum kvm_pgtable_walk_flags flags);
+int pkvm_pgtable_stage2_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size);
+int pkvm_pgtable_stage2_wrprotect(struct kvm_pgtable *pgt, u64 addr, u64 size);
+int pkvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size);
+bool pkvm_pgtable_stage2_test_clear_young(struct kvm_pgtable *pgt, u64 addr, u64 size, bool mkold);
+int pkvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr, enum kvm_pgtable_prot prot,
+				    enum kvm_pgtable_walk_flags flags);
+void pkvm_pgtable_stage2_mkyoung(struct kvm_pgtable *pgt, u64 addr,
+				 enum kvm_pgtable_walk_flags flags);
+int pkvm_pgtable_stage2_split(struct kvm_pgtable *pgt, u64 addr, u64 size,
+			      struct kvm_mmu_memory_cache *mc);
+void pkvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level);
+kvm_pte_t *pkvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt, u64 phys, s8 level,
+					       enum kvm_pgtable_prot prot, void *mc,
+					       bool force_pte);
 #endif	/* __ARM64_KVM_PKVM_H__ */
diff --git a/arch/arm64/include/asm/kvm_ptrauth.h b/arch/arm64/include/asm/kvm_ptrauth.h
index 6199c9f7ec6e..e50987b32483 100644
--- a/arch/arm64/include/asm/kvm_ptrauth.h
+++ b/arch/arm64/include/asm/kvm_ptrauth.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_KVM_PTRAUTH_H
 #define __ASM_KVM_PTRAUTH_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #include <asm/sysreg.h>
 
@@ -100,7 +100,7 @@ alternative_else_nop_endif
 .endm
 #endif /* CONFIG_ARM64_PTR_AUTH */
 
-#else  /* !__ASSEMBLY */
+#else  /* !__ASSEMBLER__ */
 
 #define __ptrauth_save_key(ctxt, key)					\
 	do {								\
@@ -120,5 +120,5 @@ alternative_else_nop_endif
 		__ptrauth_save_key(ctxt, APGA);				\
 	} while(0)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ASM_KVM_PTRAUTH_H */
diff --git a/arch/arm64/include/asm/kvm_ras.h b/arch/arm64/include/asm/kvm_ras.h
deleted file mode 100644
index 87e10d9a635b..000000000000
--- a/arch/arm64/include/asm/kvm_ras.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2018 - Arm Ltd */
-
-#ifndef __ARM64_KVM_RAS_H__
-#define __ARM64_KVM_RAS_H__
-
-#include <linux/acpi.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-
-#include <asm/acpi.h>
-
-/*
- * Was this synchronous external abort a RAS notification?
- * Returns '0' for errors handled by some RAS subsystem, or -ENOENT.
- */
-static inline int kvm_handle_guest_sea(phys_addr_t addr, u64 esr)
-{
-	/* apei_claim_sea(NULL) expects to mask interrupts itself */
-	lockdep_assert_irqs_enabled();
-
-	return apei_claim_sea(NULL);
-}
-
-#endif /* __ARM64_KVM_RAS_H__ */
diff --git a/arch/arm64/include/asm/linkage.h b/arch/arm64/include/asm/linkage.h
index d3acd9c87509..40bd17add539 100644
--- a/arch/arm64/include/asm/linkage.h
+++ b/arch/arm64/include/asm/linkage.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_LINKAGE_H
 #define __ASM_LINKAGE_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #include <asm/assembler.h>
 #endif
 
diff --git a/arch/arm64/include/asm/mem_encrypt.h b/arch/arm64/include/asm/mem_encrypt.h
index f8f78f622dd2..314b2b52025f 100644
--- a/arch/arm64/include/asm/mem_encrypt.h
+++ b/arch/arm64/include/asm/mem_encrypt.h
@@ -4,6 +4,8 @@
 
 #include <asm/rsi.h>
 
+struct device;
+
 struct arm64_mem_crypt_ops {
 	int (*encrypt)(unsigned long addr, int numpages);
 	int (*decrypt)(unsigned long addr, int numpages);
@@ -21,4 +23,15 @@ static inline bool force_dma_unencrypted(struct device *dev)
 	return is_realm_world();
 }
 
+/*
+ * For Arm CCA guests, canonical addresses are "encrypted", so no changes
+ * required for dma_addr_encrypted().
+ * The unencrypted DMA buffers must be accessed via the unprotected IPA,
+ * "top IPA bit" set.
+ */
+#define dma_addr_unencrypted(x)		((x) | PROT_NS_SHARED)
+
+/* Clear the "top" IPA bit while converting back */
+#define dma_addr_canonical(x)		((x) & ~PROT_NS_SHARED)
+
 #endif	/* __ASM_MEM_ENCRYPT_H */
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 8b9f33cf561b..9d54b2ea49d6 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -118,7 +118,7 @@
  * VMAP'd stacks are allocated at page granularity, so we must ensure that such
  * stacks are a multiple of page size.
  */
-#if defined(CONFIG_VMAP_STACK) && (MIN_THREAD_SHIFT < PAGE_SHIFT)
+#if (MIN_THREAD_SHIFT < PAGE_SHIFT)
 #define THREAD_SHIFT		PAGE_SHIFT
 #else
 #define THREAD_SHIFT		MIN_THREAD_SHIFT
@@ -135,23 +135,22 @@
  * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry
  * assembly.
  */
-#ifdef CONFIG_VMAP_STACK
 #define THREAD_ALIGN		(2 * THREAD_SIZE)
-#else
-#define THREAD_ALIGN		THREAD_SIZE
-#endif
 
 #define IRQ_STACK_SIZE		THREAD_SIZE
 
 #define OVERFLOW_STACK_SIZE	SZ_4K
 
+#define NVHE_STACK_SHIFT       PAGE_SHIFT
+#define NVHE_STACK_SIZE        (UL(1) << NVHE_STACK_SHIFT)
+
 /*
  * With the minimum frame size of [x29, x30], exactly half the combined
  * sizes of the hyp and overflow stacks is the maximum size needed to
  * save the unwinded stacktrace; plus an additional entry to delimit the
  * end.
  */
-#define NVHE_STACKTRACE_SIZE	((OVERFLOW_STACK_SIZE + PAGE_SIZE) / 2 + sizeof(long))
+#define NVHE_STACKTRACE_SIZE	((OVERFLOW_STACK_SIZE + NVHE_STACK_SIZE) / 2 + sizeof(long))
 
 /*
  * Alignment of kernel segments (e.g. .text, .data).
@@ -208,7 +207,7 @@
  */
 #define TRAMP_SWAPPER_OFFSET	(2 * PAGE_SIZE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/bitops.h>
 #include <linux/compiler.h>
@@ -309,6 +308,7 @@ static inline const void *__tag_set(const void *addr, u8 tag)
 #define arch_enable_tag_checks_sync()		mte_enable_kernel_sync()
 #define arch_enable_tag_checks_async()		mte_enable_kernel_async()
 #define arch_enable_tag_checks_asymm()		mte_enable_kernel_asymm()
+#define arch_enable_tag_checks_write_only()	mte_enable_kernel_store_only()
 #define arch_suppress_tag_checks_start()	mte_enable_tco()
 #define arch_suppress_tag_checks_stop()		mte_disable_tco()
 #define arch_force_async_tag_fault()		mte_check_tfsr_exit()
@@ -392,7 +392,6 @@ static inline unsigned long virt_to_pfn(const void *kaddr)
  *  virt_to_page(x)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(x)	indicates whether a virtual address is valid
  */
-#define ARCH_PFN_OFFSET		((unsigned long)PHYS_PFN_OFFSET)
 
 #if defined(CONFIG_DEBUG_VIRTUAL)
 #define page_to_virt(x)	({						\
@@ -422,7 +421,7 @@ static inline unsigned long virt_to_pfn(const void *kaddr)
 })
 
 void dump_mem_limit(void);
-#endif /* !ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Given that the GIC architecture permits ITS implementations that can only be
diff --git a/arch/arm64/include/asm/mman.h b/arch/arm64/include/asm/mman.h
index 1d53022fc7e1..8770c7ee759f 100644
--- a/arch/arm64/include/asm/mman.h
+++ b/arch/arm64/include/asm/mman.h
@@ -7,13 +7,14 @@
 #ifndef BUILD_VDSO
 #include <linux/compiler.h>
 #include <linux/fs.h>
+#include <linux/hugetlb.h>
 #include <linux/shmem_fs.h>
 #include <linux/types.h>
 
-static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot,
+static inline vm_flags_t arch_calc_vm_prot_bits(unsigned long prot,
 	unsigned long pkey)
 {
-	unsigned long ret = 0;
+	vm_flags_t ret = 0;
 
 	if (system_supports_bti() && (prot & PROT_BTI))
 		ret |= VM_ARM64_BTI;
@@ -33,8 +34,8 @@ static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot,
 }
 #define arch_calc_vm_prot_bits(prot, pkey) arch_calc_vm_prot_bits(prot, pkey)
 
-static inline unsigned long arch_calc_vm_flag_bits(struct file *file,
-						   unsigned long flags)
+static inline vm_flags_t arch_calc_vm_flag_bits(struct file *file,
+						unsigned long flags)
 {
 	/*
 	 * Only allow MTE on anonymous mappings as these are guaranteed to be
@@ -44,7 +45,7 @@ static inline unsigned long arch_calc_vm_flag_bits(struct file *file,
 	if (system_supports_mte()) {
 		if (flags & (MAP_ANONYMOUS | MAP_HUGETLB))
 			return VM_MTE_ALLOWED;
-		if (shmem_file(file))
+		if (shmem_file(file) || is_file_hugepages(file))
 			return VM_MTE_ALLOWED;
 	}
 
@@ -67,7 +68,7 @@ static inline bool arch_validate_prot(unsigned long prot,
 }
 #define arch_validate_prot(prot, addr) arch_validate_prot(prot, addr)
 
-static inline bool arch_validate_flags(unsigned long vm_flags)
+static inline bool arch_validate_flags(vm_flags_t vm_flags)
 {
 	if (system_supports_mte()) {
 		/*
diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h
index 2ec96d91acc6..137a173df1ff 100644
--- a/arch/arm64/include/asm/mmu.h
+++ b/arch/arm64/include/asm/mmu.h
@@ -12,11 +12,18 @@
 #define USER_ASID_FLAG	(UL(1) << USER_ASID_BIT)
 #define TTBR_ASID_MASK	(UL(0xffff) << 48)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/refcount.h>
 #include <asm/cpufeature.h>
 
+enum pgtable_type {
+	TABLE_PTE,
+	TABLE_PMD,
+	TABLE_PUD,
+	TABLE_P4D,
+};
+
 typedef struct {
 	atomic64_t	id;
 #ifdef CONFIG_COMPAT
@@ -71,6 +78,8 @@ extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
 			       pgprot_t prot, bool page_mappings_only);
 extern void *fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot);
 extern void mark_linear_text_alias_ro(void);
+extern int split_kernel_leaf_mapping(unsigned long start, unsigned long end);
+extern void linear_map_maybe_split_to_ptes(void);
 
 /*
  * This check is triggered during the early boot before the cpufeature
@@ -94,23 +103,14 @@ static inline bool kaslr_requires_kpti(void)
 			return false;
 	}
 
-	/*
-	 * Systems affected by Cavium erratum 24756 are incompatible
-	 * with KPTI.
-	 */
-	if (IS_ENABLED(CONFIG_CAVIUM_ERRATUM_27456)) {
-		extern const struct midr_range cavium_erratum_27456_cpus[];
-
-		if (is_midr_in_range_list(read_cpuid_id(),
-					  cavium_erratum_27456_cpus))
-			return false;
-	}
-
 	return true;
 }
 
-#define INIT_MM_CONTEXT(name)	\
-	.pgd = swapper_pg_dir,
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+void kpti_install_ng_mappings(void);
+#else
+static inline void kpti_install_ng_mappings(void) {}
+#endif
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 #endif
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index 48b3d9553b67..cc80af59c69e 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_MMU_CONTEXT_H
 #define __ASM_MMU_CONTEXT_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/compiler.h>
 #include <linux/sched.h>
@@ -62,29 +62,21 @@ static inline void cpu_switch_mm(pgd_t *pgd, struct mm_struct *mm)
 }
 
 /*
- * TCR.T0SZ value to use when the ID map is active.
- */
-#define idmap_t0sz	TCR_T0SZ(IDMAP_VA_BITS)
-
-/*
  * Ensure TCR.T0SZ is set to the provided value.
  */
 static inline void __cpu_set_tcr_t0sz(unsigned long t0sz)
 {
 	unsigned long tcr = read_sysreg(tcr_el1);
 
-	if ((tcr & TCR_T0SZ_MASK) == t0sz)
+	if ((tcr & TCR_EL1_T0SZ_MASK) == t0sz)
 		return;
 
-	tcr &= ~TCR_T0SZ_MASK;
+	tcr &= ~TCR_EL1_T0SZ_MASK;
 	tcr |= t0sz;
 	write_sysreg(tcr, tcr_el1);
 	isb();
 }
 
-#define cpu_set_default_tcr_t0sz()	__cpu_set_tcr_t0sz(TCR_T0SZ(vabits_actual))
-#define cpu_set_idmap_tcr_t0sz()	__cpu_set_tcr_t0sz(idmap_t0sz)
-
 /*
  * Remove the idmap from TTBR0_EL1 and install the pgd of the active mm.
  *
@@ -103,7 +95,7 @@ static inline void cpu_uninstall_idmap(void)
 
 	cpu_set_reserved_ttbr0();
 	local_flush_tlb_all();
-	cpu_set_default_tcr_t0sz();
+	__cpu_set_tcr_t0sz(TCR_T0SZ(vabits_actual));
 
 	if (mm != &init_mm && !system_uses_ttbr0_pan())
 		cpu_switch_mm(mm->pgd, mm);
@@ -113,7 +105,7 @@ static inline void cpu_install_idmap(void)
 {
 	cpu_set_reserved_ttbr0();
 	local_flush_tlb_all();
-	cpu_set_idmap_tcr_t0sz();
+	__cpu_set_tcr_t0sz(TCR_T0SZ(IDMAP_VA_BITS));
 
 	cpu_switch_mm(lm_alias(idmap_pg_dir), &init_mm);
 }
@@ -271,18 +263,26 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 }
 
 static inline const struct cpumask *
-task_cpu_possible_mask(struct task_struct *p)
+__task_cpu_possible_mask(struct task_struct *p, const struct cpumask *mask)
 {
 	if (!static_branch_unlikely(&arm64_mismatched_32bit_el0))
-		return cpu_possible_mask;
+		return mask;
 
 	if (!is_compat_thread(task_thread_info(p)))
-		return cpu_possible_mask;
+		return mask;
 
 	return system_32bit_el0_cpumask();
 }
+
+static inline const struct cpumask *
+task_cpu_possible_mask(struct task_struct *p)
+{
+	return __task_cpu_possible_mask(p, cpu_possible_mask);
+}
 #define task_cpu_possible_mask	task_cpu_possible_mask
 
+const struct cpumask *task_cpu_fallback_mask(struct task_struct *p);
+
 void verify_cpu_asid_bits(void);
 void post_ttbr_update_workaround(void);
 
@@ -322,6 +322,6 @@ static inline void deactivate_mm(struct task_struct *tsk,
 
 #include <asm-generic/mmu_context.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* !__ASM_MMU_CONTEXT_H */
diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h
index 79550b22ba19..fb9b88eebeb1 100644
--- a/arch/arm64/include/asm/module.h
+++ b/arch/arm64/include/asm/module.h
@@ -19,6 +19,7 @@ struct mod_arch_specific {
 
 	/* for CONFIG_DYNAMIC_FTRACE */
 	struct plt_entry	*ftrace_trampolines;
+	struct plt_entry	*init_ftrace_trampolines;
 };
 
 u64 module_emit_plt_entry(struct module *mod, Elf64_Shdr *sechdrs,
diff --git a/arch/arm64/include/asm/module.lds.h b/arch/arm64/include/asm/module.lds.h
index b9ae8349e35d..fb944b46846d 100644
--- a/arch/arm64/include/asm/module.lds.h
+++ b/arch/arm64/include/asm/module.lds.h
@@ -2,6 +2,7 @@ SECTIONS {
 	.plt 0 : { BYTE(0) }
 	.init.plt 0 : { BYTE(0) }
 	.text.ftrace_trampoline 0 : { BYTE(0) }
+	.init.text.ftrace_trampoline 0 : { BYTE(0) }
 
 #ifdef CONFIG_KASAN_SW_TAGS
 	/*
diff --git a/arch/arm64/include/asm/mshyperv.h b/arch/arm64/include/asm/mshyperv.h
index a975e1a689dd..b721d3134ab6 100644
--- a/arch/arm64/include/asm/mshyperv.h
+++ b/arch/arm64/include/asm/mshyperv.h
@@ -6,9 +6,8 @@
  * the ARM64 architecture.  See include/asm-generic/mshyperv.h for
  * definitions are that architecture independent.
  *
- * Definitions that are specified in the Hyper-V Top Level Functional
- * Spec (TLFS) should not go in this file, but should instead go in
- * hyperv-tlfs.h.
+ * Definitions that are derived from Hyper-V code or headers should not go in
+ * this file, but should instead go in the relevant files in include/hyperv.
  *
  * Copyright (C) 2021, Microsoft, Inc.
  *
@@ -20,7 +19,7 @@
 
 #include <linux/types.h>
 #include <linux/arm-smccc.h>
-#include <asm/hyperv-tlfs.h>
+#include <hyperv/hvhdk.h>
 
 /*
  * Declare calls to get and set Hyper-V VP register values on ARM64, which
@@ -41,6 +40,19 @@ static inline u64 hv_get_msr(unsigned int reg)
 	return hv_get_vpreg(reg);
 }
 
+/*
+ * Nested is not supported on arm64
+ */
+static inline void hv_set_non_nested_msr(unsigned int reg, u64 value)
+{
+	hv_set_msr(reg, value);
+}
+
+static inline u64 hv_get_non_nested_msr(unsigned int reg)
+{
+	return hv_get_msr(reg);
+}
+
 /* SMCCC hypercall parameters */
 #define HV_SMCCC_FUNC_NUMBER	1
 #define HV_FUNC_ID	ARM_SMCCC_CALL_VAL(			\
diff --git a/arch/arm64/include/asm/mte-kasan.h b/arch/arm64/include/asm/mte-kasan.h
index 2e98028c1965..352139271918 100644
--- a/arch/arm64/include/asm/mte-kasan.h
+++ b/arch/arm64/include/asm/mte-kasan.h
@@ -9,7 +9,7 @@
 #include <asm/cputype.h>
 #include <asm/mte-def.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 
@@ -200,6 +200,7 @@ static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag,
 void mte_enable_kernel_sync(void);
 void mte_enable_kernel_async(void);
 void mte_enable_kernel_asymm(void);
+int mte_enable_kernel_store_only(void);
 
 #else /* CONFIG_ARM64_MTE */
 
@@ -251,8 +252,13 @@ static inline void mte_enable_kernel_asymm(void)
 {
 }
 
+static inline int mte_enable_kernel_store_only(void)
+{
+	return -EINVAL;
+}
+
 #endif /* CONFIG_ARM64_MTE */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_MTE_KASAN_H  */
diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h
index 6567df8ec8ca..6d4a78b9dc3e 100644
--- a/arch/arm64/include/asm/mte.h
+++ b/arch/arm64/include/asm/mte.h
@@ -8,7 +8,7 @@
 #include <asm/compiler.h>
 #include <asm/mte-def.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/bitfield.h>
 #include <linux/kasan-enabled.h>
@@ -48,12 +48,12 @@ static inline void set_page_mte_tagged(struct page *page)
 	 * before the page flags update.
 	 */
 	smp_wmb();
-	set_bit(PG_mte_tagged, &page->flags);
+	set_bit(PG_mte_tagged, &page->flags.f);
 }
 
 static inline bool page_mte_tagged(struct page *page)
 {
-	bool ret = test_bit(PG_mte_tagged, &page->flags);
+	bool ret = test_bit(PG_mte_tagged, &page->flags.f);
 
 	VM_WARN_ON_ONCE(folio_test_hugetlb(page_folio(page)));
 
@@ -82,7 +82,7 @@ static inline bool try_page_mte_tagging(struct page *page)
 {
 	VM_WARN_ON_ONCE(folio_test_hugetlb(page_folio(page)));
 
-	if (!test_and_set_bit(PG_mte_lock, &page->flags))
+	if (!test_and_set_bit(PG_mte_lock, &page->flags.f))
 		return true;
 
 	/*
@@ -90,7 +90,7 @@ static inline bool try_page_mte_tagging(struct page *page)
 	 * already. Check if the PG_mte_tagged flag has been set or wait
 	 * otherwise.
 	 */
-	smp_cond_load_acquire(&page->flags, VAL & (1UL << PG_mte_tagged));
+	smp_cond_load_acquire(&page->flags.f, VAL & (1UL << PG_mte_tagged));
 
 	return false;
 }
@@ -173,13 +173,13 @@ static inline void folio_set_hugetlb_mte_tagged(struct folio *folio)
 	 * before the folio flags update.
 	 */
 	smp_wmb();
-	set_bit(PG_mte_tagged, &folio->flags);
+	set_bit(PG_mte_tagged, &folio->flags.f);
 
 }
 
 static inline bool folio_test_hugetlb_mte_tagged(struct folio *folio)
 {
-	bool ret = test_bit(PG_mte_tagged, &folio->flags);
+	bool ret = test_bit(PG_mte_tagged, &folio->flags.f);
 
 	VM_WARN_ON_ONCE(!folio_test_hugetlb(folio));
 
@@ -196,7 +196,7 @@ static inline bool folio_try_hugetlb_mte_tagging(struct folio *folio)
 {
 	VM_WARN_ON_ONCE(!folio_test_hugetlb(folio));
 
-	if (!test_and_set_bit(PG_mte_lock, &folio->flags))
+	if (!test_and_set_bit(PG_mte_lock, &folio->flags.f))
 		return true;
 
 	/*
@@ -204,7 +204,7 @@ static inline bool folio_try_hugetlb_mte_tagging(struct folio *folio)
 	 * already. Check if the PG_mte_tagged flag has been set or wait
 	 * otherwise.
 	 */
-	smp_cond_load_acquire(&folio->flags, VAL & (1UL << PG_mte_tagged));
+	smp_cond_load_acquire(&folio->flags.f, VAL & (1UL << PG_mte_tagged));
 
 	return false;
 }
@@ -282,5 +282,5 @@ static inline void mte_check_tfsr_exit(void)
 }
 #endif /* CONFIG_KASAN_HW_TAGS */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ASM_MTE_H  */
diff --git a/arch/arm64/include/asm/neon.h b/arch/arm64/include/asm/neon.h
index d4b1d172a79b..acebee4605b5 100644
--- a/arch/arm64/include/asm/neon.h
+++ b/arch/arm64/include/asm/neon.h
@@ -13,7 +13,7 @@
 
 #define cpu_has_neon()		system_supports_fpsimd()
 
-void kernel_neon_begin(void);
-void kernel_neon_end(void);
+void kernel_neon_begin(struct user_fpsimd_state *);
+void kernel_neon_end(struct user_fpsimd_state *);
 
 #endif /* ! __ASM_NEON_H */
diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h
index 2312e6ee595f..00f117ff4f7a 100644
--- a/arch/arm64/include/asm/page.h
+++ b/arch/arm64/include/asm/page.h
@@ -10,7 +10,7 @@
 
 #include <asm/page-def.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/personality.h> /* for READ_IMPLIES_EXEC */
 #include <linux/types.h> /* for gfp_t */
@@ -33,8 +33,8 @@ struct folio *vma_alloc_zeroed_movable_folio(struct vm_area_struct *vma,
 						unsigned long vaddr);
 #define vma_alloc_zeroed_movable_folio vma_alloc_zeroed_movable_folio
 
-void tag_clear_highpage(struct page *to);
-#define __HAVE_ARCH_TAG_CLEAR_HIGHPAGE
+bool tag_clear_highpages(struct page *to, int numpages);
+#define __HAVE_ARCH_TAG_CLEAR_HIGHPAGES
 
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
@@ -45,7 +45,7 @@ int pfn_is_map_memory(unsigned long pfn);
 
 #include <asm/memory.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #define VM_DATA_DEFAULT_FLAGS	(VM_DATA_FLAGS_TSK_EXEC | VM_MTE_ALLOWED)
 
diff --git a/arch/arm64/include/asm/percpu.h b/arch/arm64/include/asm/percpu.h
index 9abcc8ef3087..b57b2bb00967 100644
--- a/arch/arm64/include/asm/percpu.h
+++ b/arch/arm64/include/asm/percpu.h
@@ -77,7 +77,7 @@ __percpu_##name##_case_##sz(void *ptr, unsigned long val)		\
 	"	stxr" #sfx "\t%w[loop], %" #w "[tmp], %[ptr]\n"		\
 	"	cbnz	%w[loop], 1b",					\
 	/* LSE atomics */						\
-		#op_lse "\t%" #w "[val], %[ptr]\n"			\
+		#op_lse "\t%" #w "[val], %" #w "[tmp], %[ptr]\n"	\
 		__nops(3))						\
 	: [loop] "=&r" (loop), [tmp] "=&r" (tmp),			\
 	  [ptr] "+Q"(*(u##sz *)ptr)					\
@@ -124,9 +124,16 @@ PERCPU_RW_OPS(8)
 PERCPU_RW_OPS(16)
 PERCPU_RW_OPS(32)
 PERCPU_RW_OPS(64)
-PERCPU_OP(add, add, stadd)
-PERCPU_OP(andnot, bic, stclr)
-PERCPU_OP(or, orr, stset)
+
+/*
+ * Use value-returning atomics for CPU-local ops as they are more likely
+ * to execute "near" to the CPU (e.g. in L1$).
+ *
+ * https://lore.kernel.org/r/e7d539ed-ced0-4b96-8ecd-048a5b803b85@paulmck-laptop
+ */
+PERCPU_OP(add, add, ldadd)
+PERCPU_OP(andnot, bic, ldclr)
+PERCPU_OP(or, orr, ldset)
 PERCPU_RET_OP(add, add, ldadd)
 
 #undef PERCPU_RW_OPS
diff --git a/arch/arm64/include/asm/pgalloc.h b/arch/arm64/include/asm/pgalloc.h
index e75422864d1b..1b4509d3382c 100644
--- a/arch/arm64/include/asm/pgalloc.h
+++ b/arch/arm64/include/asm/pgalloc.h
@@ -85,24 +85,6 @@ static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgdp, p4d_t *p4dp)
 	__pgd_populate(pgdp, __pa(p4dp), pgdval);
 }
 
-static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	gfp_t gfp = GFP_PGTABLE_USER;
-
-	if (mm == &init_mm)
-		gfp = GFP_PGTABLE_KERNEL;
-	return (p4d_t *)get_zeroed_page(gfp);
-}
-
-static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d)
-{
-	if (!pgtable_l5_enabled())
-		return;
-	BUG_ON((unsigned long)p4d & (PAGE_SIZE-1));
-	free_page((unsigned long)p4d);
-}
-
-#define __p4d_free_tlb(tlb, p4d, addr)  p4d_free((tlb)->mm, p4d)
 #else
 static inline void __pgd_populate(pgd_t *pgdp, phys_addr_t p4dp, pgdval_t prot)
 {
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index c78a988cca93..d49180bb7cb3 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -7,40 +7,46 @@
 
 #include <asm/memory.h>
 
+#define PTDESC_ORDER 3
+
+/* Number of VA bits resolved by a single translation table level */
+#define PTDESC_TABLE_SHIFT	(PAGE_SHIFT - PTDESC_ORDER)
+
 /*
  * Number of page-table levels required to address 'va_bits' wide
  * address, without section mapping. We resolve the top (va_bits - PAGE_SHIFT)
- * bits with (PAGE_SHIFT - 3) bits at each page table level. Hence:
+ * bits with PTDESC_TABLE_SHIFT bits at each page table level. Hence:
  *
- *  levels = DIV_ROUND_UP((va_bits - PAGE_SHIFT), (PAGE_SHIFT - 3))
+ *  levels = DIV_ROUND_UP((va_bits - PAGE_SHIFT), PTDESC_TABLE_SHIFT)
  *
  * where DIV_ROUND_UP(n, d) => (((n) + (d) - 1) / (d))
  *
  * We cannot include linux/kernel.h which defines DIV_ROUND_UP here
  * due to build issues. So we open code DIV_ROUND_UP here:
  *
- *	((((va_bits) - PAGE_SHIFT) + (PAGE_SHIFT - 3) - 1) / (PAGE_SHIFT - 3))
+ *	((((va_bits) - PAGE_SHIFT) + PTDESC_TABLE_SHIFT - 1) / PTDESC_TABLE_SHIFT)
  *
  * which gets simplified as :
  */
-#define ARM64_HW_PGTABLE_LEVELS(va_bits) (((va_bits) - 4) / (PAGE_SHIFT - 3))
+#define ARM64_HW_PGTABLE_LEVELS(va_bits) \
+	(((va_bits) - PTDESC_ORDER - 1) / PTDESC_TABLE_SHIFT)
 
 /*
  * Size mapped by an entry at level n ( -1 <= n <= 3)
- * We map (PAGE_SHIFT - 3) at all translation levels and PAGE_SHIFT bits
+ * We map PTDESC_TABLE_SHIFT at all translation levels and PAGE_SHIFT bits
  * in the final page. The maximum number of translation levels supported by
  * the architecture is 5. Hence, starting at level n, we have further
  * ((4 - n) - 1) levels of translation excluding the offset within the page.
  * So, the total number of bits mapped by an entry at level n is :
  *
- *  ((4 - n) - 1) * (PAGE_SHIFT - 3) + PAGE_SHIFT
+ *  ((4 - n) - 1) * PTDESC_TABLE_SHIFT + PAGE_SHIFT
  *
  * Rearranging it a bit we get :
- *   (4 - n) * (PAGE_SHIFT - 3) + 3
+ *   (4 - n) * PTDESC_TABLE_SHIFT + PTDESC_ORDER
  */
-#define ARM64_HW_PGTABLE_LEVEL_SHIFT(n)	((PAGE_SHIFT - 3) * (4 - (n)) + 3)
+#define ARM64_HW_PGTABLE_LEVEL_SHIFT(n)	(PTDESC_TABLE_SHIFT * (4 - (n)) + PTDESC_ORDER)
 
-#define PTRS_PER_PTE		(1 << (PAGE_SHIFT - 3))
+#define PTRS_PER_PTE		(1 << PTDESC_TABLE_SHIFT)
 
 /*
  * PMD_SHIFT determines the size a level 2 page table entry can map.
@@ -49,7 +55,7 @@
 #define PMD_SHIFT		ARM64_HW_PGTABLE_LEVEL_SHIFT(2)
 #define PMD_SIZE		(_AC(1, UL) << PMD_SHIFT)
 #define PMD_MASK		(~(PMD_SIZE-1))
-#define PTRS_PER_PMD		(1 << (PAGE_SHIFT - 3))
+#define PTRS_PER_PMD		(1 << PTDESC_TABLE_SHIFT)
 #endif
 
 /*
@@ -59,14 +65,14 @@
 #define PUD_SHIFT		ARM64_HW_PGTABLE_LEVEL_SHIFT(1)
 #define PUD_SIZE		(_AC(1, UL) << PUD_SHIFT)
 #define PUD_MASK		(~(PUD_SIZE-1))
-#define PTRS_PER_PUD		(1 << (PAGE_SHIFT - 3))
+#define PTRS_PER_PUD		(1 << PTDESC_TABLE_SHIFT)
 #endif
 
 #if CONFIG_PGTABLE_LEVELS > 4
 #define P4D_SHIFT		ARM64_HW_PGTABLE_LEVEL_SHIFT(0)
 #define P4D_SIZE		(_AC(1, UL) << P4D_SHIFT)
 #define P4D_MASK		(~(P4D_SIZE-1))
-#define PTRS_PER_P4D		(1 << (PAGE_SHIFT - 3))
+#define PTRS_PER_P4D		(1 << PTDESC_TABLE_SHIFT)
 #endif
 
 /*
@@ -97,7 +103,6 @@
  * Level -1 descriptor (PGD).
  */
 #define PGD_TYPE_TABLE		(_AT(pgdval_t, 3) << 0)
-#define PGD_TABLE_BIT		(_AT(pgdval_t, 1) << 1)
 #define PGD_TYPE_MASK		(_AT(pgdval_t, 3) << 0)
 #define PGD_TABLE_AF		(_AT(pgdval_t, 1) << 10)	/* Ignored if no FEAT_HAFT */
 #define PGD_TABLE_PXN		(_AT(pgdval_t, 1) << 59)
@@ -107,7 +112,6 @@
  * Level 0 descriptor (P4D).
  */
 #define P4D_TYPE_TABLE		(_AT(p4dval_t, 3) << 0)
-#define P4D_TABLE_BIT		(_AT(p4dval_t, 1) << 1)
 #define P4D_TYPE_MASK		(_AT(p4dval_t, 3) << 0)
 #define P4D_TYPE_SECT		(_AT(p4dval_t, 1) << 0)
 #define P4D_SECT_RDONLY		(_AT(p4dval_t, 1) << 7)		/* AP[2] */
@@ -119,7 +123,6 @@
  * Level 1 descriptor (PUD).
  */
 #define PUD_TYPE_TABLE		(_AT(pudval_t, 3) << 0)
-#define PUD_TABLE_BIT		(_AT(pudval_t, 1) << 1)
 #define PUD_TYPE_MASK		(_AT(pudval_t, 3) << 0)
 #define PUD_TYPE_SECT		(_AT(pudval_t, 1) << 0)
 #define PUD_SECT_RDONLY		(_AT(pudval_t, 1) << 7)		/* AP[2] */
@@ -133,7 +136,6 @@
 #define PMD_TYPE_MASK		(_AT(pmdval_t, 3) << 0)
 #define PMD_TYPE_TABLE		(_AT(pmdval_t, 3) << 0)
 #define PMD_TYPE_SECT		(_AT(pmdval_t, 1) << 0)
-#define PMD_TABLE_BIT		(_AT(pmdval_t, 1) << 1)
 #define PMD_TABLE_AF		(_AT(pmdval_t, 1) << 10)	/* Ignored if no FEAT_HAFT */
 
 /*
@@ -162,7 +164,6 @@
 #define PTE_VALID		(_AT(pteval_t, 1) << 0)
 #define PTE_TYPE_MASK		(_AT(pteval_t, 3) << 0)
 #define PTE_TYPE_PAGE		(_AT(pteval_t, 3) << 0)
-#define PTE_TABLE_BIT		(_AT(pteval_t, 1) << 1)
 #define PTE_USER		(_AT(pteval_t, 1) << 6)		/* AP[1] */
 #define PTE_RDONLY		(_AT(pteval_t, 1) << 7)		/* AP[2] */
 #define PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
@@ -222,113 +223,58 @@
  */
 #define S1_TABLE_AP		(_AT(pmdval_t, 3) << 61)
 
-/*
- * Highest possible physical address supported.
- */
-#define PHYS_MASK_SHIFT		(CONFIG_ARM64_PA_BITS)
-#define PHYS_MASK		((UL(1) << PHYS_MASK_SHIFT) - 1)
-
 #define TTBR_CNP_BIT		(UL(1) << 0)
 
 /*
  * TCR flags.
  */
-#define TCR_T0SZ_OFFSET		0
-#define TCR_T1SZ_OFFSET		16
-#define TCR_T0SZ(x)		((UL(64) - (x)) << TCR_T0SZ_OFFSET)
-#define TCR_T1SZ(x)		((UL(64) - (x)) << TCR_T1SZ_OFFSET)
-#define TCR_TxSZ(x)		(TCR_T0SZ(x) | TCR_T1SZ(x))
-#define TCR_TxSZ_WIDTH		6
-#define TCR_T0SZ_MASK		(((UL(1) << TCR_TxSZ_WIDTH) - 1) << TCR_T0SZ_OFFSET)
-#define TCR_T1SZ_MASK		(((UL(1) << TCR_TxSZ_WIDTH) - 1) << TCR_T1SZ_OFFSET)
-
-#define TCR_EPD0_SHIFT		7
-#define TCR_EPD0_MASK		(UL(1) << TCR_EPD0_SHIFT)
-#define TCR_IRGN0_SHIFT		8
-#define TCR_IRGN0_MASK		(UL(3) << TCR_IRGN0_SHIFT)
-#define TCR_IRGN0_NC		(UL(0) << TCR_IRGN0_SHIFT)
-#define TCR_IRGN0_WBWA		(UL(1) << TCR_IRGN0_SHIFT)
-#define TCR_IRGN0_WT		(UL(2) << TCR_IRGN0_SHIFT)
-#define TCR_IRGN0_WBnWA		(UL(3) << TCR_IRGN0_SHIFT)
-
-#define TCR_EPD1_SHIFT		23
-#define TCR_EPD1_MASK		(UL(1) << TCR_EPD1_SHIFT)
-#define TCR_IRGN1_SHIFT		24
-#define TCR_IRGN1_MASK		(UL(3) << TCR_IRGN1_SHIFT)
-#define TCR_IRGN1_NC		(UL(0) << TCR_IRGN1_SHIFT)
-#define TCR_IRGN1_WBWA		(UL(1) << TCR_IRGN1_SHIFT)
-#define TCR_IRGN1_WT		(UL(2) << TCR_IRGN1_SHIFT)
-#define TCR_IRGN1_WBnWA		(UL(3) << TCR_IRGN1_SHIFT)
-
-#define TCR_IRGN_NC		(TCR_IRGN0_NC | TCR_IRGN1_NC)
-#define TCR_IRGN_WBWA		(TCR_IRGN0_WBWA | TCR_IRGN1_WBWA)
-#define TCR_IRGN_WT		(TCR_IRGN0_WT | TCR_IRGN1_WT)
-#define TCR_IRGN_WBnWA		(TCR_IRGN0_WBnWA | TCR_IRGN1_WBnWA)
-#define TCR_IRGN_MASK		(TCR_IRGN0_MASK | TCR_IRGN1_MASK)
-
-
-#define TCR_ORGN0_SHIFT		10
-#define TCR_ORGN0_MASK		(UL(3) << TCR_ORGN0_SHIFT)
-#define TCR_ORGN0_NC		(UL(0) << TCR_ORGN0_SHIFT)
-#define TCR_ORGN0_WBWA		(UL(1) << TCR_ORGN0_SHIFT)
-#define TCR_ORGN0_WT		(UL(2) << TCR_ORGN0_SHIFT)
-#define TCR_ORGN0_WBnWA		(UL(3) << TCR_ORGN0_SHIFT)
-
-#define TCR_ORGN1_SHIFT		26
-#define TCR_ORGN1_MASK		(UL(3) << TCR_ORGN1_SHIFT)
-#define TCR_ORGN1_NC		(UL(0) << TCR_ORGN1_SHIFT)
-#define TCR_ORGN1_WBWA		(UL(1) << TCR_ORGN1_SHIFT)
-#define TCR_ORGN1_WT		(UL(2) << TCR_ORGN1_SHIFT)
-#define TCR_ORGN1_WBnWA		(UL(3) << TCR_ORGN1_SHIFT)
-
-#define TCR_ORGN_NC		(TCR_ORGN0_NC | TCR_ORGN1_NC)
-#define TCR_ORGN_WBWA		(TCR_ORGN0_WBWA | TCR_ORGN1_WBWA)
-#define TCR_ORGN_WT		(TCR_ORGN0_WT | TCR_ORGN1_WT)
-#define TCR_ORGN_WBnWA		(TCR_ORGN0_WBnWA | TCR_ORGN1_WBnWA)
-#define TCR_ORGN_MASK		(TCR_ORGN0_MASK | TCR_ORGN1_MASK)
-
-#define TCR_SH0_SHIFT		12
-#define TCR_SH0_MASK		(UL(3) << TCR_SH0_SHIFT)
-#define TCR_SH0_INNER		(UL(3) << TCR_SH0_SHIFT)
-
-#define TCR_SH1_SHIFT		28
-#define TCR_SH1_MASK		(UL(3) << TCR_SH1_SHIFT)
-#define TCR_SH1_INNER		(UL(3) << TCR_SH1_SHIFT)
-#define TCR_SHARED		(TCR_SH0_INNER | TCR_SH1_INNER)
-
-#define TCR_TG0_SHIFT		14
-#define TCR_TG0_MASK		(UL(3) << TCR_TG0_SHIFT)
-#define TCR_TG0_4K		(UL(0) << TCR_TG0_SHIFT)
-#define TCR_TG0_64K		(UL(1) << TCR_TG0_SHIFT)
-#define TCR_TG0_16K		(UL(2) << TCR_TG0_SHIFT)
-
-#define TCR_TG1_SHIFT		30
-#define TCR_TG1_MASK		(UL(3) << TCR_TG1_SHIFT)
-#define TCR_TG1_16K		(UL(1) << TCR_TG1_SHIFT)
-#define TCR_TG1_4K		(UL(2) << TCR_TG1_SHIFT)
-#define TCR_TG1_64K		(UL(3) << TCR_TG1_SHIFT)
-
-#define TCR_IPS_SHIFT		32
-#define TCR_IPS_MASK		(UL(7) << TCR_IPS_SHIFT)
-#define TCR_A1			(UL(1) << 22)
-#define TCR_ASID16		(UL(1) << 36)
-#define TCR_TBI0		(UL(1) << 37)
-#define TCR_TBI1		(UL(1) << 38)
-#define TCR_HA			(UL(1) << 39)
-#define TCR_HD			(UL(1) << 40)
-#define TCR_HPD0_SHIFT		41
-#define TCR_HPD0		(UL(1) << TCR_HPD0_SHIFT)
-#define TCR_HPD1_SHIFT		42
-#define TCR_HPD1		(UL(1) << TCR_HPD1_SHIFT)
-#define TCR_TBID0		(UL(1) << 51)
-#define TCR_TBID1		(UL(1) << 52)
-#define TCR_NFD0		(UL(1) << 53)
-#define TCR_NFD1		(UL(1) << 54)
-#define TCR_E0PD0		(UL(1) << 55)
-#define TCR_E0PD1		(UL(1) << 56)
-#define TCR_TCMA0		(UL(1) << 57)
-#define TCR_TCMA1		(UL(1) << 58)
-#define TCR_DS			(UL(1) << 59)
+#define TCR_T0SZ(x)		((UL(64) - (x)) << TCR_EL1_T0SZ_SHIFT)
+#define TCR_T1SZ(x)		((UL(64) - (x)) << TCR_EL1_T1SZ_SHIFT)
+
+#define TCR_T0SZ_MASK		TCR_EL1_T0SZ_MASK
+#define TCR_T1SZ_MASK		TCR_EL1_T1SZ_MASK
+
+#define TCR_EPD0_MASK		TCR_EL1_EPD0_MASK
+#define TCR_EPD1_MASK		TCR_EL1_EPD1_MASK
+
+#define TCR_IRGN0_MASK		TCR_EL1_IRGN0_MASK
+#define TCR_IRGN0_WBWA		(TCR_EL1_IRGN0_WBWA << TCR_EL1_IRGN0_SHIFT)
+
+#define TCR_ORGN0_MASK		TCR_EL1_ORGN0_MASK
+#define TCR_ORGN0_WBWA		(TCR_EL1_ORGN0_WBWA << TCR_EL1_ORGN0_SHIFT)
+
+#define TCR_SH0_MASK		TCR_EL1_SH0_MASK
+#define TCR_SH0_INNER		(TCR_EL1_SH0_INNER << TCR_EL1_SH0_SHIFT)
+
+#define TCR_SH1_MASK		TCR_EL1_SH1_MASK
+
+#define TCR_TG0_SHIFT		TCR_EL1_TG0_SHIFT
+#define TCR_TG0_MASK		TCR_EL1_TG0_MASK
+#define TCR_TG0_4K		(TCR_EL1_TG0_4K << TCR_EL1_TG0_SHIFT)
+#define TCR_TG0_64K		(TCR_EL1_TG0_64K << TCR_EL1_TG0_SHIFT)
+#define TCR_TG0_16K		(TCR_EL1_TG0_16K << TCR_EL1_TG0_SHIFT)
+
+#define TCR_TG1_SHIFT		TCR_EL1_TG1_SHIFT
+#define TCR_TG1_MASK		TCR_EL1_TG1_MASK
+#define TCR_TG1_16K		(TCR_EL1_TG1_16K << TCR_EL1_TG1_SHIFT)
+#define TCR_TG1_4K		(TCR_EL1_TG1_4K << TCR_EL1_TG1_SHIFT)
+#define TCR_TG1_64K		(TCR_EL1_TG1_64K << TCR_EL1_TG1_SHIFT)
+
+#define TCR_IPS_SHIFT		TCR_EL1_IPS_SHIFT
+#define TCR_IPS_MASK		TCR_EL1_IPS_MASK
+#define TCR_A1			TCR_EL1_A1
+#define TCR_ASID16		TCR_EL1_AS
+#define TCR_TBI0		TCR_EL1_TBI0
+#define TCR_TBI1		TCR_EL1_TBI1
+#define TCR_HA			TCR_EL1_HA
+#define TCR_HD			TCR_EL1_HD
+#define TCR_HPD0		TCR_EL1_HPD0
+#define TCR_HPD1		TCR_EL1_HPD1
+#define TCR_TBID0		TCR_EL1_TBID0
+#define TCR_TBID1		TCR_EL1_TBID1
+#define TCR_E0PD0		TCR_EL1_E0PD0
+#define TCR_E0PD1		TCR_EL1_E0PD1
+#define TCR_DS			TCR_EL1_DS
 
 /*
  * TTBR.
diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h
index 9f9cf13bbd95..161e8660eddd 100644
--- a/arch/arm64/include/asm/pgtable-prot.h
+++ b/arch/arm64/include/asm/pgtable-prot.h
@@ -17,7 +17,6 @@
 #define PTE_SWP_EXCLUSIVE	(_AT(pteval_t, 1) << 2)	 /* only for swp ptes */
 #define PTE_DIRTY		(_AT(pteval_t, 1) << 55)
 #define PTE_SPECIAL		(_AT(pteval_t, 1) << 56)
-#define PTE_DEVMAP		(_AT(pteval_t, 1) << 57)
 
 /*
  * PTE_PRESENT_INVALID=1 & PTE_VALID=0 indicates that the pte's fields should be
@@ -63,7 +62,7 @@
 #define _PAGE_READONLY_EXEC	(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN)
 #define _PAGE_EXECONLY		(_PAGE_DEFAULT | PTE_RDONLY | PTE_NG | PTE_PXN)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/cpufeature.h>
 #include <asm/pgtable-types.h>
@@ -81,17 +80,24 @@ extern unsigned long prot_ns_shared;
 #define lpa2_is_enabled()	false
 #define PTE_MAYBE_SHARED	PTE_SHARED
 #define PMD_MAYBE_SHARED	PMD_SECT_S
+#define PHYS_MASK_SHIFT		(CONFIG_ARM64_PA_BITS)
 #else
 static inline bool __pure lpa2_is_enabled(void)
 {
-	return read_tcr() & TCR_DS;
+	return read_tcr() & TCR_EL1_DS;
 }
 
 #define PTE_MAYBE_SHARED	(lpa2_is_enabled() ? 0 : PTE_SHARED)
 #define PMD_MAYBE_SHARED	(lpa2_is_enabled() ? 0 : PMD_SECT_S)
+#define PHYS_MASK_SHIFT		(lpa2_is_enabled() ? CONFIG_ARM64_PA_BITS : 48)
 #endif
 
 /*
+ * Highest possible physical address supported.
+ */
+#define PHYS_MASK		((UL(1) << PHYS_MASK_SHIFT) - 1)
+
+/*
  * If we have userspace only BTI we don't want to mark kernel pages
  * guarded even if the system does support BTI.
  */
@@ -121,7 +127,7 @@ static inline bool __pure lpa2_is_enabled(void)
 #define PAGE_READONLY_EXEC	__pgprot(_PAGE_READONLY_EXEC)
 #define PAGE_EXECONLY		__pgprot(_PAGE_EXECONLY)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define pte_pi_index(pte) ( \
 	((pte & BIT(PTE_PI_IDX_3)) >> (PTE_PI_IDX_3 - 3)) | \
@@ -162,25 +168,25 @@ static inline bool __pure lpa2_is_enabled(void)
 #define PAGE_GCS_RO	__pgprot(_PAGE_GCS_RO)
 
 #define PIE_E0	( \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_GCS),           PIE_GCS)  | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_GCS_RO),        PIE_R)   | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_EXECONLY),      PIE_X_O) | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_READONLY_EXEC), PIE_RX_O)  | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED_EXEC),   PIE_RWX_O) | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_READONLY),      PIE_R_O)   | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED),        PIE_RW_O))
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_GCS),           PIE_GCS)  | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_GCS_RO),        PIE_R)   | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_EXECONLY),      PIE_X_O) | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_READONLY_EXEC), PIE_RX_O)  | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_SHARED_EXEC),   PIE_RWX_O) | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_READONLY),      PIE_R_O)   | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_SHARED),        PIE_RW_O))
 
 #define PIE_E1	( \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_GCS),           PIE_NONE_O) | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_GCS_RO),        PIE_NONE_O) | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_EXECONLY),      PIE_NONE_O) | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_READONLY_EXEC), PIE_R)      | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED_EXEC),   PIE_RW)     | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_READONLY),      PIE_R)      | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED),        PIE_RW)     | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_KERNEL_ROX),    PIE_RX)     | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_KERNEL_EXEC),   PIE_RWX)    | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_KERNEL_RO),     PIE_R)      | \
-	PIRx_ELx_PERM(pte_pi_index(_PAGE_KERNEL),        PIE_RW))
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_GCS),           PIE_NONE_O) | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_GCS_RO),        PIE_NONE_O) | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_EXECONLY),      PIE_NONE_O) | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_READONLY_EXEC), PIE_R)      | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_SHARED_EXEC),   PIE_RW)     | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_READONLY),      PIE_R)      | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_SHARED),        PIE_RW)     | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_KERNEL_ROX),    PIE_RX)     | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_KERNEL_EXEC),   PIE_RWX)    | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_KERNEL_RO),     PIE_R)      | \
+	PIRx_ELx_PERM_PREP(pte_pi_index(_PAGE_KERNEL),        PIE_RW))
 
 #endif /* __ASM_PGTABLE_PROT_H */
diff --git a/arch/arm64/include/asm/pgtable-types.h b/arch/arm64/include/asm/pgtable-types.h
index 6d6d4065b0cb..265e8301d7ba 100644
--- a/arch/arm64/include/asm/pgtable-types.h
+++ b/arch/arm64/include/asm/pgtable-types.h
@@ -11,11 +11,19 @@
 
 #include <asm/types.h>
 
-typedef u64 pteval_t;
-typedef u64 pmdval_t;
-typedef u64 pudval_t;
-typedef u64 p4dval_t;
-typedef u64 pgdval_t;
+/*
+ * Page Table Descriptor
+ *
+ * Generic page table descriptor format from which
+ * all level specific descriptors can be derived.
+ */
+typedef u64 ptdesc_t;
+
+typedef ptdesc_t pteval_t;
+typedef ptdesc_t pmdval_t;
+typedef ptdesc_t pudval_t;
+typedef ptdesc_t p4dval_t;
+typedef ptdesc_t pgdval_t;
 
 /*
  * These are used to make use of C type-checking..
@@ -46,7 +54,7 @@ typedef struct { pgdval_t pgd; } pgd_t;
 #define pgd_val(x)	((x).pgd)
 #define __pgd(x)	((pgd_t) { (x) } )
 
-typedef struct { pteval_t pgprot; } pgprot_t;
+typedef struct { ptdesc_t pgprot; } pgprot_t;
 #define pgprot_val(x)	((x).pgprot)
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 6986345b537a..64d5f1d9cce9 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -30,7 +30,7 @@
 
 #define vmemmap			((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/cmpxchg.h>
 #include <asm/fixmap.h>
@@ -40,6 +40,85 @@
 #include <linux/sched.h>
 #include <linux/page_table_check.h>
 
+static inline void emit_pte_barriers(void)
+{
+	/*
+	 * These barriers are emitted under certain conditions after a pte entry
+	 * was modified (see e.g. __set_pte_complete()). The dsb makes the store
+	 * visible to the table walker. The isb ensures that any previous
+	 * speculative "invalid translation" marker that is in the CPU's
+	 * pipeline gets cleared, so that any access to that address after
+	 * setting the pte to valid won't cause a spurious fault. If the thread
+	 * gets preempted after storing to the pgtable but before emitting these
+	 * barriers, __switch_to() emits a dsb which ensure the walker gets to
+	 * see the store. There is no guarantee of an isb being issued though.
+	 * This is safe because it will still get issued (albeit on a
+	 * potentially different CPU) when the thread starts running again,
+	 * before any access to the address.
+	 */
+	dsb(ishst);
+	isb();
+}
+
+static inline void queue_pte_barriers(void)
+{
+	unsigned long flags;
+
+	if (in_interrupt()) {
+		emit_pte_barriers();
+		return;
+	}
+
+	flags = read_thread_flags();
+
+	if (flags & BIT(TIF_LAZY_MMU)) {
+		/* Avoid the atomic op if already set. */
+		if (!(flags & BIT(TIF_LAZY_MMU_PENDING)))
+			set_thread_flag(TIF_LAZY_MMU_PENDING);
+	} else {
+		emit_pte_barriers();
+	}
+}
+
+#define  __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+static inline void arch_enter_lazy_mmu_mode(void)
+{
+	/*
+	 * lazy_mmu_mode is not supposed to permit nesting. But in practice this
+	 * does happen with CONFIG_DEBUG_PAGEALLOC, where a page allocation
+	 * inside a lazy_mmu_mode section (such as zap_pte_range()) will change
+	 * permissions on the linear map with apply_to_page_range(), which
+	 * re-enters lazy_mmu_mode. So we tolerate nesting in our
+	 * implementation. The first call to arch_leave_lazy_mmu_mode() will
+	 * flush and clear the flag such that the remainder of the work in the
+	 * outer nest behaves as if outside of lazy mmu mode. This is safe and
+	 * keeps tracking simple.
+	 */
+
+	if (in_interrupt())
+		return;
+
+	set_thread_flag(TIF_LAZY_MMU);
+}
+
+static inline void arch_flush_lazy_mmu_mode(void)
+{
+	if (in_interrupt())
+		return;
+
+	if (test_and_clear_thread_flag(TIF_LAZY_MMU_PENDING))
+		emit_pte_barriers();
+}
+
+static inline void arch_leave_lazy_mmu_mode(void)
+{
+	if (in_interrupt())
+		return;
+
+	arch_flush_lazy_mmu_mode();
+	clear_thread_flag(TIF_LAZY_MMU);
+}
+
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
 
@@ -51,12 +130,16 @@
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 /*
- * Outside of a few very special situations (e.g. hibernation), we always
- * use broadcast TLB invalidation instructions, therefore a spurious page
- * fault on one CPU which has been handled concurrently by another CPU
- * does not need to perform additional invalidation.
+ * We use local TLB invalidation instruction when reusing page in
+ * write protection fault handler to avoid TLBI broadcast in the hot
+ * path.  This will cause spurious page faults if stale read-only TLB
+ * entries exist.
  */
-#define flush_tlb_fix_spurious_fault(vma, address, ptep) do { } while (0)
+#define flush_tlb_fix_spurious_fault(vma, address, ptep)	\
+	local_flush_tlb_page_nonotify(vma, address)
+
+#define flush_tlb_fix_spurious_fault_pmd(vma, address, pmdp)	\
+	local_flush_tlb_page_nonotify(vma, address)
 
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
@@ -68,10 +151,6 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #define pte_ERROR(e)	\
 	pr_err("%s:%d: bad pte %016llx.\n", __FILE__, __LINE__, pte_val(e))
 
-/*
- * Macros to convert between a physical address and its placement in a
- * page table entry, taking care of 52-bit addresses.
- */
 #ifdef CONFIG_ARM64_PA_BITS_52
 static inline phys_addr_t __pte_to_phys(pte_t pte)
 {
@@ -84,8 +163,15 @@ static inline pteval_t __phys_to_pte_val(phys_addr_t phys)
 	return (phys | (phys >> PTE_ADDR_HIGH_SHIFT)) & PHYS_TO_PTE_ADDR_MASK;
 }
 #else
-#define __pte_to_phys(pte)	(pte_val(pte) & PTE_ADDR_LOW)
-#define __phys_to_pte_val(phys)	(phys)
+static inline phys_addr_t __pte_to_phys(pte_t pte)
+{
+	return pte_val(pte) & PTE_ADDR_LOW;
+}
+
+static inline pteval_t __phys_to_pte_val(phys_addr_t phys)
+{
+	return phys;
+}
 #endif
 
 #define pte_pfn(pte)		(__pte_to_phys(pte) >> PAGE_SHIFT)
@@ -108,7 +194,6 @@ static inline pteval_t __phys_to_pte_val(phys_addr_t phys)
 #define pte_user(pte)		(!!(pte_val(pte) & PTE_USER))
 #define pte_user_exec(pte)	(!(pte_val(pte) & PTE_UXN))
 #define pte_cont(pte)		(!!(pte_val(pte) & PTE_CONT))
-#define pte_devmap(pte)		(!!(pte_val(pte) & PTE_DEVMAP))
 #define pte_tagged(pte)		((pte_val(pte) & PTE_ATTRINDX_MASK) == \
 				 PTE_ATTRINDX(MT_NORMAL_TAGGED))
 
@@ -212,7 +297,8 @@ static inline pmd_t set_pmd_bit(pmd_t pmd, pgprot_t prot)
 static inline pte_t pte_mkwrite_novma(pte_t pte)
 {
 	pte = set_pte_bit(pte, __pgprot(PTE_WRITE));
-	pte = clear_pte_bit(pte, __pgprot(PTE_RDONLY));
+	if (pte_sw_dirty(pte))
+		pte = clear_pte_bit(pte, __pgprot(PTE_RDONLY));
 	return pte;
 }
 
@@ -273,7 +359,7 @@ static inline pte_t pte_mknoncont(pte_t pte)
 	return clear_pte_bit(pte, __pgprot(PTE_CONT));
 }
 
-static inline pte_t pte_mkpresent(pte_t pte)
+static inline pte_t pte_mkvalid(pte_t pte)
 {
 	return set_pte_bit(pte, __pgprot(PTE_VALID));
 }
@@ -290,9 +376,9 @@ static inline pmd_t pmd_mkcont(pmd_t pmd)
 	return __pmd(pmd_val(pmd) | PMD_SECT_CONT);
 }
 
-static inline pte_t pte_mkdevmap(pte_t pte)
+static inline pmd_t pmd_mknoncont(pmd_t pmd)
 {
-	return set_pte_bit(pte, __pgprot(PTE_DEVMAP | PTE_SPECIAL));
+	return __pmd(pmd_val(pmd) & ~PMD_SECT_CONT);
 }
 
 #ifdef CONFIG_HAVE_ARCH_USERFAULTFD_WP
@@ -317,18 +403,20 @@ static inline void __set_pte_nosync(pte_t *ptep, pte_t pte)
 	WRITE_ONCE(*ptep, pte);
 }
 
-static inline void __set_pte(pte_t *ptep, pte_t pte)
+static inline void __set_pte_complete(pte_t pte)
 {
-	__set_pte_nosync(ptep, pte);
-
 	/*
 	 * Only if the new pte is valid and kernel, otherwise TLB maintenance
-	 * or update_mmu_cache() have the necessary barriers.
+	 * has the necessary barriers.
 	 */
-	if (pte_valid_not_user(pte)) {
-		dsb(ishst);
-		isb();
-	}
+	if (pte_valid_not_user(pte))
+		queue_pte_barriers();
+}
+
+static inline void __set_pte(pte_t *ptep, pte_t pte)
+{
+	__set_pte_nosync(ptep, pte);
+	__set_pte_complete(pte);
 }
 
 static inline pte_t __ptep_get(pte_t *ptep)
@@ -349,7 +437,7 @@ bool pgattr_change_is_safe(pteval_t old, pteval_t new);
  *   1      0      |   1           0          1
  *   1      1      |   0           1          x
  *
- * When hardware DBM is not present, the sofware PTE_DIRTY bit is updated via
+ * When hardware DBM is not present, the software PTE_DIRTY bit is updated via
  * the page fault mechanism. Checking the dirty status of a pte becomes:
  *
  *   PTE_DIRTY || (PTE_WRITE && !PTE_RDONLY)
@@ -420,23 +508,6 @@ static inline pte_t pte_advance_pfn(pte_t pte, unsigned long nr)
 	return pfn_pte(pte_pfn(pte) + nr, pte_pgprot(pte));
 }
 
-static inline void __set_ptes(struct mm_struct *mm,
-			      unsigned long __always_unused addr,
-			      pte_t *ptep, pte_t pte, unsigned int nr)
-{
-	page_table_check_ptes_set(mm, ptep, pte, nr);
-	__sync_cache_and_tags(pte, nr);
-
-	for (;;) {
-		__check_safe_pte_update(mm, ptep, pte);
-		__set_pte(ptep, pte);
-		if (--nr == 0)
-			break;
-		ptep++;
-		pte = pte_advance_pfn(pte, 1);
-	}
-}
-
 /*
  * Hugetlb definitions.
  */
@@ -483,12 +554,12 @@ static inline pmd_t pte_pmd(pte_t pte)
 
 static inline pgprot_t mk_pud_sect_prot(pgprot_t prot)
 {
-	return __pgprot((pgprot_val(prot) & ~PUD_TABLE_BIT) | PUD_TYPE_SECT);
+	return __pgprot((pgprot_val(prot) & ~PUD_TYPE_MASK) | PUD_TYPE_SECT);
 }
 
 static inline pgprot_t mk_pmd_sect_prot(pgprot_t prot)
 {
-	return __pgprot((pgprot_val(prot) & ~PMD_TABLE_BIT) | PMD_TYPE_SECT);
+	return __pgprot((pgprot_val(prot) & ~PMD_TYPE_MASK) | PMD_TYPE_SECT);
 }
 
 static inline pte_t pte_swp_mkexclusive(pte_t pte)
@@ -496,7 +567,7 @@ static inline pte_t pte_swp_mkexclusive(pte_t pte)
 	return set_pte_bit(pte, __pgprot(PTE_SWP_EXCLUSIVE));
 }
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & PTE_SWP_EXCLUSIVE;
 }
@@ -532,7 +603,7 @@ static inline int pte_protnone(pte_t pte)
 	/*
 	 * pte_present_invalid() tells us that the pte is invalid from HW
 	 * perspective but present from SW perspective, so the fields are to be
-	 * interpretted as per the HW layout. The second 2 checks are the unique
+	 * interpreted as per the HW layout. The second 2 checks are the unique
 	 * encoding that we use for PROT_NONE. It is insufficient to only use
 	 * the first check because we share the same encoding scheme with pmds
 	 * which support pmd_mkinvalid(), so can be present-invalid without
@@ -548,18 +619,6 @@ static inline int pmd_protnone(pmd_t pmd)
 #endif
 
 #define pmd_present(pmd)	pte_present(pmd_pte(pmd))
-
-/*
- * THP definitions.
- */
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-static inline int pmd_trans_huge(pmd_t pmd)
-{
-	return pmd_val(pmd) && pmd_present(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
 #define pmd_valid(pmd)		pte_valid(pmd_pte(pmd))
@@ -585,14 +644,17 @@ static inline int pmd_trans_huge(pmd_t pmd)
 
 #define pmd_write(pmd)		pte_write(pmd_pte(pmd))
 
-#define pmd_mkhuge(pmd)		(__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT))
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#define pmd_devmap(pmd)		pte_devmap(pmd_pte(pmd))
-#endif
-static inline pmd_t pmd_mkdevmap(pmd_t pmd)
+static inline pmd_t pmd_mkhuge(pmd_t pmd)
 {
-	return pte_pmd(set_pte_bit(pmd_pte(pmd), __pgprot(PTE_DEVMAP)));
+	/*
+	 * It's possible that the pmd is present-invalid on entry
+	 * and in that case it needs to remain present-invalid on
+	 * exit. So ensure the VALID bit does not get modified.
+	 */
+	pmdval_t mask = PMD_TYPE_MASK & ~PTE_VALID;
+	pmdval_t val = PMD_TYPE_SECT & ~PTE_VALID;
+
+	return __pmd((pmd_val(pmd) & ~mask) | val);
 }
 
 #ifdef CONFIG_ARCH_SUPPORTS_PMD_PFNMAP
@@ -607,24 +669,29 @@ static inline pmd_t pmd_mkspecial(pmd_t pmd)
 #define __phys_to_pmd_val(phys)	__phys_to_pte_val(phys)
 #define pmd_pfn(pmd)		((__pmd_to_phys(pmd) & PMD_MASK) >> PAGE_SHIFT)
 #define pfn_pmd(pfn,prot)	__pmd(__phys_to_pmd_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
 #define pud_young(pud)		pte_young(pud_pte(pud))
 #define pud_mkyoung(pud)	pte_pud(pte_mkyoung(pud_pte(pud)))
 #define pud_write(pud)		pte_write(pud_pte(pud))
 
-#define pud_mkhuge(pud)		(__pud(pud_val(pud) & ~PUD_TABLE_BIT))
+static inline pud_t pud_mkhuge(pud_t pud)
+{
+	/*
+	 * It's possible that the pud is present-invalid on entry
+	 * and in that case it needs to remain present-invalid on
+	 * exit. So ensure the VALID bit does not get modified.
+	 */
+	pudval_t mask = PUD_TYPE_MASK & ~PTE_VALID;
+	pudval_t val = PUD_TYPE_SECT & ~PTE_VALID;
+
+	return __pud((pud_val(pud) & ~mask) | val);
+}
 
 #define __pud_to_phys(pud)	__pte_to_phys(pud_pte(pud))
 #define __phys_to_pud_val(phys)	__phys_to_pte_val(phys)
 #define pud_pfn(pud)		((__pud_to_phys(pud) & PUD_MASK) >> PAGE_SHIFT)
 #define pfn_pud(pfn,prot)	__pud(__phys_to_pud_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
 
-#ifdef CONFIG_ARCH_SUPPORTS_PUD_PFNMAP
-#define pud_special(pte)	pte_special(pud_pte(pud))
-#define pud_mkspecial(pte)	pte_pud(pte_mkspecial(pud_pte(pud)))
-#endif
-
 #define pmd_pgprot pmd_pgprot
 static inline pgprot_t pmd_pgprot(pmd_t pmd)
 {
@@ -641,30 +708,64 @@ static inline pgprot_t pud_pgprot(pud_t pud)
 	return __pgprot(pud_val(pfn_pud(pfn, __pgprot(0))) ^ pud_val(pud));
 }
 
-static inline void __set_pte_at(struct mm_struct *mm,
-				unsigned long __always_unused addr,
-				pte_t *ptep, pte_t pte, unsigned int nr)
+static inline void __set_ptes_anysz(struct mm_struct *mm, pte_t *ptep,
+				    pte_t pte, unsigned int nr,
+				    unsigned long pgsize)
 {
-	__sync_cache_and_tags(pte, nr);
-	__check_safe_pte_update(mm, ptep, pte);
-	__set_pte(ptep, pte);
+	unsigned long stride = pgsize >> PAGE_SHIFT;
+
+	switch (pgsize) {
+	case PAGE_SIZE:
+		page_table_check_ptes_set(mm, ptep, pte, nr);
+		break;
+	case PMD_SIZE:
+		page_table_check_pmds_set(mm, (pmd_t *)ptep, pte_pmd(pte), nr);
+		break;
+#ifndef __PAGETABLE_PMD_FOLDED
+	case PUD_SIZE:
+		page_table_check_puds_set(mm, (pud_t *)ptep, pte_pud(pte), nr);
+		break;
+#endif
+	default:
+		VM_WARN_ON(1);
+	}
+
+	__sync_cache_and_tags(pte, nr * stride);
+
+	for (;;) {
+		__check_safe_pte_update(mm, ptep, pte);
+		__set_pte_nosync(ptep, pte);
+		if (--nr == 0)
+			break;
+		ptep++;
+		pte = pte_advance_pfn(pte, stride);
+	}
+
+	__set_pte_complete(pte);
 }
 
-static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
-			      pmd_t *pmdp, pmd_t pmd)
+static inline void __set_ptes(struct mm_struct *mm,
+			      unsigned long __always_unused addr,
+			      pte_t *ptep, pte_t pte, unsigned int nr)
 {
-	page_table_check_pmd_set(mm, pmdp, pmd);
-	return __set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd),
-						PMD_SIZE >> PAGE_SHIFT);
+	__set_ptes_anysz(mm, ptep, pte, nr, PAGE_SIZE);
 }
 
-static inline void set_pud_at(struct mm_struct *mm, unsigned long addr,
-			      pud_t *pudp, pud_t pud)
+static inline void __set_pmds(struct mm_struct *mm,
+			      unsigned long __always_unused addr,
+			      pmd_t *pmdp, pmd_t pmd, unsigned int nr)
+{
+	__set_ptes_anysz(mm, (pte_t *)pmdp, pmd_pte(pmd), nr, PMD_SIZE);
+}
+#define set_pmd_at(mm, addr, pmdp, pmd) __set_pmds(mm, addr, pmdp, pmd, 1)
+
+static inline void __set_puds(struct mm_struct *mm,
+			      unsigned long __always_unused addr,
+			      pud_t *pudp, pud_t pud, unsigned int nr)
 {
-	page_table_check_pud_set(mm, pudp, pud);
-	return __set_pte_at(mm, addr, (pte_t *)pudp, pud_pte(pud),
-						PUD_SIZE >> PAGE_SHIFT);
+	__set_ptes_anysz(mm, (pte_t *)pudp, pud_pte(pud), nr, PUD_SIZE);
 }
+#define set_pud_at(mm, addr, pudp, pud) __set_puds(mm, addr, pudp, pud, 1)
 
 #define __p4d_to_phys(p4d)	__pte_to_phys(p4d_pte(p4d))
 #define __phys_to_p4d_val(phys)	__phys_to_pte_val(phys)
@@ -724,6 +825,17 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 #define pmd_leaf_size(pmd)	(pmd_cont(pmd) ? CONT_PMD_SIZE : PMD_SIZE)
 #define pte_leaf_size(pte)	(pte_cont(pte) ? CONT_PTE_SIZE : PAGE_SIZE)
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline int pmd_trans_huge(pmd_t pmd)
+{
+	/*
+	 * If pmd is present-invalid, pmd_table() won't detect it
+	 * as a table, so force the valid bit for the comparison.
+	 */
+	return pmd_present(pmd) && !pmd_table(__pmd(pmd_val(pmd) | PTE_VALID));
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
 #if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3
 static inline bool pud_sect(pud_t pud) { return false; }
 static inline bool pud_table(pud_t pud) { return true; }
@@ -734,8 +846,6 @@ static inline bool pud_table(pud_t pud) { return true; }
 				 PUD_TYPE_TABLE)
 #endif
 
-extern pgd_t init_pg_dir[];
-extern pgd_t init_pg_end[];
 extern pgd_t swapper_pg_dir[];
 extern pgd_t idmap_pg_dir[];
 extern pgd_t tramp_pg_dir[];
@@ -760,10 +870,8 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
 
 	WRITE_ONCE(*pmdp, pmd);
 
-	if (pmd_valid(pmd)) {
-		dsb(ishst);
-		isb();
-	}
+	if (pmd_valid(pmd))
+		queue_pte_barriers();
 }
 
 static inline void pmd_clear(pmd_t *pmdp)
@@ -793,19 +901,14 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 /* use ONLY for statically allocated translation tables */
 #define pte_offset_kimg(dir,addr)	((pte_t *)__phys_to_kimg(pte_offset_phys((dir), (addr))))
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
-
 #if CONFIG_PGTABLE_LEVELS > 2
 
 #define pmd_ERROR(e)	\
 	pr_err("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
 
 #define pud_none(pud)		(!pud_val(pud))
-#define pud_bad(pud)		(!pud_table(pud))
+#define pud_bad(pud)		((pud_val(pud) & PUD_TYPE_MASK) != \
+				 PUD_TYPE_TABLE)
 #define pud_present(pud)	pte_present(pud_pte(pud))
 #ifndef __PAGETABLE_PMD_FOLDED
 #define pud_leaf(pud)		(pud_present(pud) && !pud_table(pud))
@@ -827,10 +930,8 @@ static inline void set_pud(pud_t *pudp, pud_t pud)
 
 	WRITE_ONCE(*pudp, pud);
 
-	if (pud_valid(pud)) {
-		dsb(ishst);
-		isb();
-	}
+	if (pud_valid(pud))
+		queue_pte_barriers();
 }
 
 static inline void pud_clear(pud_t *pudp)
@@ -896,7 +997,9 @@ static inline bool mm_pud_folded(const struct mm_struct *mm)
 	pr_err("%s:%d: bad pud %016llx.\n", __FILE__, __LINE__, pud_val(e))
 
 #define p4d_none(p4d)		(pgtable_l4_enabled() && !p4d_val(p4d))
-#define p4d_bad(p4d)		(pgtable_l4_enabled() && !(p4d_val(p4d) & 2))
+#define p4d_bad(p4d)		(pgtable_l4_enabled() && \
+				((p4d_val(p4d) & P4D_TYPE_MASK) != \
+				 P4D_TYPE_TABLE))
 #define p4d_present(p4d)	(!p4d_none(p4d))
 
 static inline void set_p4d(p4d_t *p4dp, p4d_t p4d)
@@ -907,8 +1010,7 @@ static inline void set_p4d(p4d_t *p4dp, p4d_t p4d)
 	}
 
 	WRITE_ONCE(*p4dp, p4d);
-	dsb(ishst);
-	isb();
+	queue_pte_barriers();
 }
 
 static inline void p4d_clear(p4d_t *p4dp)
@@ -1023,7 +1125,9 @@ static inline bool mm_p4d_folded(const struct mm_struct *mm)
 	pr_err("%s:%d: bad p4d %016llx.\n", __FILE__, __LINE__, p4d_val(e))
 
 #define pgd_none(pgd)		(pgtable_l5_enabled() && !pgd_val(pgd))
-#define pgd_bad(pgd)		(pgtable_l5_enabled() && !(pgd_val(pgd) & 2))
+#define pgd_bad(pgd)		(pgtable_l5_enabled() && \
+				((pgd_val(pgd) & PGD_TYPE_MASK) != \
+				 PGD_TYPE_TABLE))
 #define pgd_present(pgd)	(!pgd_none(pgd))
 
 static inline void set_pgd(pgd_t *pgdp, pgd_t pgd)
@@ -1034,8 +1138,7 @@ static inline void set_pgd(pgd_t *pgdp, pgd_t pgd)
 	}
 
 	WRITE_ONCE(*pgdp, pgd);
-	dsb(ishst);
-	isb();
+	queue_pte_barriers();
 }
 
 static inline void pgd_clear(pgd_t *pgdp)
@@ -1195,16 +1298,6 @@ static inline int pmdp_set_access_flags(struct vm_area_struct *vma,
 	return __ptep_set_access_flags(vma, address, (pte_t *)pmdp,
 							pmd_pte(entry), dirty);
 }
-
-static inline int pud_devmap(pud_t pud)
-{
-	return 0;
-}
-
-static inline int pgd_devmap(pgd_t pgd)
-{
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_PAGE_TABLE_CHECK
@@ -1276,16 +1369,37 @@ static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE || CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG */
 
-static inline pte_t __ptep_get_and_clear(struct mm_struct *mm,
-				       unsigned long address, pte_t *ptep)
+static inline pte_t __ptep_get_and_clear_anysz(struct mm_struct *mm,
+					       pte_t *ptep,
+					       unsigned long pgsize)
 {
 	pte_t pte = __pte(xchg_relaxed(&pte_val(*ptep), 0));
 
-	page_table_check_pte_clear(mm, pte);
+	switch (pgsize) {
+	case PAGE_SIZE:
+		page_table_check_pte_clear(mm, pte);
+		break;
+	case PMD_SIZE:
+		page_table_check_pmd_clear(mm, pte_pmd(pte));
+		break;
+#ifndef __PAGETABLE_PMD_FOLDED
+	case PUD_SIZE:
+		page_table_check_pud_clear(mm, pte_pud(pte));
+		break;
+#endif
+	default:
+		VM_WARN_ON(1);
+	}
 
 	return pte;
 }
 
+static inline pte_t __ptep_get_and_clear(struct mm_struct *mm,
+				       unsigned long address, pte_t *ptep)
+{
+	return __ptep_get_and_clear_anysz(mm, ptep, PAGE_SIZE);
+}
+
 static inline void __clear_full_ptes(struct mm_struct *mm, unsigned long addr,
 				pte_t *ptep, unsigned int nr, int full)
 {
@@ -1322,11 +1436,7 @@ static inline pte_t __get_and_clear_full_ptes(struct mm_struct *mm,
 static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
 					    unsigned long address, pmd_t *pmdp)
 {
-	pmd_t pmd = __pmd(xchg_relaxed(&pmd_val(*pmdp), 0));
-
-	page_table_check_pmd_clear(mm, pmd);
-
-	return pmd;
+	return pte_pmd(__ptep_get_and_clear_anysz(mm, (pte_t *)pmdp, PMD_SIZE));
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
@@ -1345,7 +1455,7 @@ static inline void ___ptep_set_wrprotect(struct mm_struct *mm,
 }
 
 /*
- * __ptep_set_wrprotect - mark read-only while trasferring potential hardware
+ * __ptep_set_wrprotect - mark read-only while transferring potential hardware
  * dirty status (PTE_DBM && !PTE_RDONLY) to the software PTE_DIRTY bit.
  */
 static inline void __ptep_set_wrprotect(struct mm_struct *mm,
@@ -1519,6 +1629,14 @@ static inline void update_mmu_cache_range(struct vm_fault *vmf,
  */
 #define arch_wants_old_prefaulted_pte	cpu_has_hw_af
 
+/*
+ * Request exec memory is read into pagecache in at least 64K folios. This size
+ * can be contpte-mapped when 4K base pages are in use (16 pages into 1 iTLB
+ * entry), and HPA can coalesce it (4 pages into 1 TLB entry) when 16K base
+ * pages are in use.
+ */
+#define exec_folio_order() ilog2(SZ_64K >> PAGE_SHIFT)
+
 static inline bool pud_sect_supported(void)
 {
 	return PAGE_SIZE == SZ_4K;
@@ -1535,6 +1653,16 @@ extern void ptep_modify_prot_commit(struct vm_area_struct *vma,
 				    unsigned long addr, pte_t *ptep,
 				    pte_t old_pte, pte_t new_pte);
 
+#define modify_prot_start_ptes modify_prot_start_ptes
+extern pte_t modify_prot_start_ptes(struct vm_area_struct *vma,
+				    unsigned long addr, pte_t *ptep,
+				    unsigned int nr);
+
+#define modify_prot_commit_ptes modify_prot_commit_ptes
+extern void modify_prot_commit_ptes(struct vm_area_struct *vma, unsigned long addr,
+				    pte_t *ptep, pte_t old_pte, pte_t pte,
+				    unsigned int nr);
+
 #ifdef CONFIG_ARM64_CONTPTE
 
 /*
@@ -1825,6 +1953,6 @@ static inline void clear_young_dirty_ptes(struct vm_area_struct *vma,
 
 #endif /* CONFIG_ARM64_CONTPTE */
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_PGTABLE_H */
diff --git a/arch/arm64/include/asm/por.h b/arch/arm64/include/asm/por.h
index e06e9f473675..d913d5b529e4 100644
--- a/arch/arm64/include/asm/por.h
+++ b/arch/arm64/include/asm/por.h
@@ -6,26 +6,27 @@
 #ifndef _ASM_ARM64_POR_H
 #define _ASM_ARM64_POR_H
 
-#define POR_BITS_PER_PKEY		4
-#define POR_ELx_IDX(por_elx, idx)	(((por_elx) >> ((idx) * POR_BITS_PER_PKEY)) & 0xf)
+#include <asm/sysreg.h>
+
+#define POR_EL0_INIT	POR_ELx_PERM_PREP(0, POE_RWX)
 
 static inline bool por_elx_allows_read(u64 por, u8 pkey)
 {
-	u8 perm = POR_ELx_IDX(por, pkey);
+	u8 perm = POR_ELx_PERM_GET(pkey, por);
 
 	return perm & POE_R;
 }
 
 static inline bool por_elx_allows_write(u64 por, u8 pkey)
 {
-	u8 perm = POR_ELx_IDX(por, pkey);
+	u8 perm = POR_ELx_PERM_GET(pkey, por);
 
 	return perm & POE_W;
 }
 
 static inline bool por_elx_allows_exec(u64 por, u8 pkey)
 {
-	u8 perm = POR_ELx_IDX(por, pkey);
+	u8 perm = POR_ELx_PERM_GET(pkey, por);
 
 	return perm & POE_X;
 }
diff --git a/arch/arm64/include/asm/preempt.h b/arch/arm64/include/asm/preempt.h
index 0159b625cc7f..932ea4b62042 100644
--- a/arch/arm64/include/asm/preempt.h
+++ b/arch/arm64/include/asm/preempt.h
@@ -2,7 +2,6 @@
 #ifndef __ASM_PREEMPT_H
 #define __ASM_PREEMPT_H
 
-#include <linux/jump_label.h>
 #include <linux/thread_info.h>
 
 #define PREEMPT_NEED_RESCHED	BIT(32)
@@ -87,7 +86,6 @@ void preempt_schedule_notrace(void);
 
 #ifdef CONFIG_PREEMPT_DYNAMIC
 
-DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
 void dynamic_preempt_schedule(void);
 #define __preempt_schedule()		dynamic_preempt_schedule()
 void dynamic_preempt_schedule_notrace(void);
diff --git a/arch/arm64/include/asm/proc-fns.h b/arch/arm64/include/asm/proc-fns.h
index 0d5d1f0525eb..ab78a78821a2 100644
--- a/arch/arm64/include/asm/proc-fns.h
+++ b/arch/arm64/include/asm/proc-fns.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_PROCFNS_H
 #define __ASM_PROCFNS_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/page.h>
 
@@ -21,5 +21,5 @@ extern u64 cpu_do_resume(phys_addr_t ptr, u64 idmap_ttbr);
 
 #include <asm/memory.h>
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ASM_PROCFNS_H */
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 1bf1a3b16e88..e30c4c8e3a7a 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -23,7 +23,9 @@
 #define MTE_CTRL_TCF_ASYNC		(1UL << 17)
 #define MTE_CTRL_TCF_ASYMM		(1UL << 18)
 
-#ifndef __ASSEMBLY__
+#define MTE_CTRL_STORE_ONLY		(1UL << 19)
+
+#ifndef __ASSEMBLER__
 
 #include <linux/build_bug.h>
 #include <linux/cache.h>
@@ -170,7 +172,12 @@ struct thread_struct {
 	unsigned long		fault_code;	/* ESR_EL1 value */
 	struct debug_info	debug;		/* debugging */
 
-	struct user_fpsimd_state	kernel_fpsimd_state;
+	/*
+	 * Set [cleared] by kernel_neon_begin() [kernel_neon_end()] to the
+	 * address of a caller provided buffer that will be used to preserve a
+	 * task's kernel mode FPSIMD state while it is scheduled out.
+	 */
+	struct user_fpsimd_state	*kernel_fpsimd_state;
 	unsigned int			kernel_fpsimd_cpu;
 #ifdef CONFIG_ARM64_PTR_AUTH
 	struct ptrauth_keys_user	keys_user;
@@ -435,5 +442,5 @@ int set_tsc_mode(unsigned int val);
 #define GET_TSC_CTL(adr)        get_tsc_mode((adr))
 #define SET_TSC_CTL(val)        set_tsc_mode((val))
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ASM_PROCESSOR_H */
diff --git a/arch/arm64/include/asm/ptdump.h b/arch/arm64/include/asm/ptdump.h
index 6cf4aae05219..baff24004459 100644
--- a/arch/arm64/include/asm/ptdump.h
+++ b/arch/arm64/include/asm/ptdump.h
@@ -7,7 +7,9 @@
 
 #include <linux/ptdump.h>
 
-#ifdef CONFIG_PTDUMP_CORE
+DECLARE_STATIC_KEY_FALSE(arm64_ptdump_lock_key);
+
+#ifdef CONFIG_PTDUMP
 
 #include <linux/mm_types.h>
 #include <linux/seq_file.h>
@@ -24,8 +26,8 @@ struct ptdump_info {
 };
 
 struct ptdump_prot_bits {
-	u64		mask;
-	u64		val;
+	ptdesc_t	mask;
+	ptdesc_t	val;
 	const char	*set;
 	const char	*clear;
 };
@@ -34,7 +36,7 @@ struct ptdump_pg_level {
 	const struct ptdump_prot_bits *bits;
 	char name[4];
 	int num;
-	u64 mask;
+	ptdesc_t mask;
 };
 
 /*
@@ -51,7 +53,7 @@ struct ptdump_pg_state {
 	const struct mm_struct *mm;
 	unsigned long start_address;
 	int level;
-	u64 current_prot;
+	ptdesc_t current_prot;
 	bool check_wx;
 	unsigned long wx_pages;
 	unsigned long uxn_pages;
@@ -59,7 +61,13 @@ struct ptdump_pg_state {
 
 void ptdump_walk(struct seq_file *s, struct ptdump_info *info);
 void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
-	       u64 val);
+	       pteval_t val);
+void note_page_pte(struct ptdump_state *st, unsigned long addr, pte_t pte);
+void note_page_pmd(struct ptdump_state *st, unsigned long addr, pmd_t pmd);
+void note_page_pud(struct ptdump_state *st, unsigned long addr, pud_t pud);
+void note_page_p4d(struct ptdump_state *st, unsigned long addr, p4d_t p4d);
+void note_page_pgd(struct ptdump_state *st, unsigned long addr, pgd_t pgd);
+void note_page_flush(struct ptdump_state *st);
 #ifdef CONFIG_PTDUMP_DEBUGFS
 #define EFI_RUNTIME_MAP_END	DEFAULT_MAP_WINDOW_64
 void __init ptdump_debugfs_register(struct ptdump_info *info, const char *name);
@@ -69,7 +77,13 @@ static inline void ptdump_debugfs_register(struct ptdump_info *info,
 #endif /* CONFIG_PTDUMP_DEBUGFS */
 #else
 static inline void note_page(struct ptdump_state *pt_st, unsigned long addr,
-			     int level, u64 val) { }
-#endif /* CONFIG_PTDUMP_CORE */
+			     int level, pteval_t val) { }
+static inline void note_page_pte(struct ptdump_state *st, unsigned long addr, pte_t pte) { }
+static inline void note_page_pmd(struct ptdump_state *st, unsigned long addr, pmd_t pmd) { }
+static inline void note_page_pud(struct ptdump_state *st, unsigned long addr, pud_t pud) { }
+static inline void note_page_p4d(struct ptdump_state *st, unsigned long addr, p4d_t p4d) { }
+static inline void note_page_pgd(struct ptdump_state *st, unsigned long addr, pgd_t pgd) { }
+static inline void note_page_flush(struct ptdump_state *st) { }
+#endif /* CONFIG_PTDUMP */
 
 #endif /* __ASM_PTDUMP_H */
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 47ff8654c5ec..39582511ad72 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -94,7 +94,7 @@
  */
 #define NO_SYSCALL (-1)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/bug.h>
 #include <linux/types.h>
 
@@ -169,10 +169,6 @@ struct pt_regs {
 
 	u64 sdei_ttbr1;
 	struct frame_record_meta stackframe;
-
-	/* Only valid for some EL1 exceptions. */
-	u64 lockdep_hardirqs;
-	u64 exit_rcu;
 };
 
 /* For correct stack alignment, pt_regs has to be a multiple of 16 bytes. */
@@ -214,11 +210,12 @@ static inline void forget_syscall(struct pt_regs *regs)
 		(regs)->pmr == GIC_PRIO_IRQON :				\
 		true)
 
-#define interrupts_enabled(regs)			\
-	(!((regs)->pstate & PSR_I_BIT) && irqs_priority_unmasked(regs))
+static __always_inline bool regs_irqs_disabled(const struct pt_regs *regs)
+{
+	return (regs->pstate & PSR_I_BIT) || !irqs_priority_unmasked(regs);
+}
 
-#define fast_interrupts_enabled(regs) \
-	(!((regs)->pstate & PSR_F_BIT))
+#define interrupts_enabled(regs)	(!regs_irqs_disabled(regs))
 
 static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 {
@@ -364,5 +361,5 @@ static inline void procedure_link_pointer_set(struct pt_regs *regs,
 
 extern unsigned long profile_pc(struct pt_regs *regs);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif
diff --git a/arch/arm64/include/asm/rqspinlock.h b/arch/arm64/include/asm/rqspinlock.h
new file mode 100644
index 000000000000..9ea0a74e5892
--- /dev/null
+++ b/arch/arm64/include/asm/rqspinlock.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RQSPINLOCK_H
+#define _ASM_RQSPINLOCK_H
+
+#include <asm/barrier.h>
+
+/*
+ * Hardcode res_smp_cond_load_acquire implementations for arm64 to a custom
+ * version based on [0]. In rqspinlock code, our conditional expression involves
+ * checking the value _and_ additionally a timeout. However, on arm64, the
+ * WFE-based implementation may never spin again if no stores occur to the
+ * locked byte in the lock word. As such, we may be stuck forever if
+ * event-stream based unblocking is not available on the platform for WFE spin
+ * loops (arch_timer_evtstrm_available).
+ *
+ * Once support for smp_cond_load_acquire_timewait [0] lands, we can drop this
+ * copy-paste.
+ *
+ * While we rely on the implementation to amortize the cost of sampling
+ * cond_expr for us, it will not happen when event stream support is
+ * unavailable, time_expr check is amortized. This is not the common case, and
+ * it would be difficult to fit our logic in the time_expr_ns >= time_limit_ns
+ * comparison, hence just let it be. In case of event-stream, the loop is woken
+ * up at microsecond granularity.
+ *
+ * [0]: https://lore.kernel.org/lkml/20250203214911.898276-1-ankur.a.arora@oracle.com
+ */
+
+#ifndef smp_cond_load_acquire_timewait
+
+#define smp_cond_time_check_count	200
+
+#define __smp_cond_load_relaxed_spinwait(ptr, cond_expr, time_expr_ns,	\
+					 time_limit_ns) ({		\
+	typeof(ptr) __PTR = (ptr);					\
+	__unqual_scalar_typeof(*ptr) VAL;				\
+	unsigned int __count = 0;					\
+	for (;;) {							\
+		VAL = READ_ONCE(*__PTR);				\
+		if (cond_expr)						\
+			break;						\
+		cpu_relax();						\
+		if (__count++ < smp_cond_time_check_count)		\
+			continue;					\
+		if ((time_expr_ns) >= (time_limit_ns))			\
+			break;						\
+		__count = 0;						\
+	}								\
+	(typeof(*ptr))VAL;						\
+})
+
+#define __smp_cond_load_acquire_timewait(ptr, cond_expr,		\
+					 time_expr_ns, time_limit_ns)	\
+({									\
+	typeof(ptr) __PTR = (ptr);					\
+	__unqual_scalar_typeof(*ptr) VAL;				\
+	for (;;) {							\
+		VAL = smp_load_acquire(__PTR);				\
+		if (cond_expr)						\
+			break;						\
+		__cmpwait_relaxed(__PTR, VAL);				\
+		if ((time_expr_ns) >= (time_limit_ns))			\
+			break;						\
+	}								\
+	(typeof(*ptr))VAL;						\
+})
+
+#define smp_cond_load_acquire_timewait(ptr, cond_expr,			\
+				      time_expr_ns, time_limit_ns)	\
+({									\
+	__unqual_scalar_typeof(*ptr) _val;				\
+	int __wfe = arch_timer_evtstrm_available();			\
+									\
+	if (likely(__wfe)) {						\
+		_val = __smp_cond_load_acquire_timewait(ptr, cond_expr,	\
+							time_expr_ns,	\
+							time_limit_ns);	\
+	} else {							\
+		_val = __smp_cond_load_relaxed_spinwait(ptr, cond_expr,	\
+							time_expr_ns,	\
+							time_limit_ns);	\
+		smp_acquire__after_ctrl_dep();				\
+	}								\
+	(typeof(*ptr))_val;						\
+})
+
+#endif
+
+#define res_smp_cond_load_acquire(v, c) smp_cond_load_acquire_timewait(v, c, 0, 1)
+
+#include <asm-generic/rqspinlock.h>
+
+#endif /* _ASM_RQSPINLOCK_H */
diff --git a/arch/arm64/include/asm/rsi.h b/arch/arm64/include/asm/rsi.h
index 188cbb9b23f5..88b50d660e85 100644
--- a/arch/arm64/include/asm/rsi.h
+++ b/arch/arm64/include/asm/rsi.h
@@ -10,11 +10,13 @@
 #include <linux/jump_label.h>
 #include <asm/rsi_cmds.h>
 
+#define RSI_PDEV_NAME "arm-cca-dev"
+
 DECLARE_STATIC_KEY_FALSE(rsi_present);
 
 void __init arm64_rsi_init(void);
 
-bool __arm64_is_protected_mmio(phys_addr_t base, size_t size);
+bool arm64_rsi_is_protected(phys_addr_t base, size_t size);
 
 static inline bool is_realm_world(void)
 {
diff --git a/arch/arm64/include/asm/rsi_cmds.h b/arch/arm64/include/asm/rsi_cmds.h
index e6a211001bd3..2c8763876dfb 100644
--- a/arch/arm64/include/asm/rsi_cmds.h
+++ b/arch/arm64/include/asm/rsi_cmds.h
@@ -7,6 +7,8 @@
 #define __ASM_RSI_CMDS_H
 
 #include <linux/arm-smccc.h>
+#include <linux/string.h>
+#include <asm/memory.h>
 
 #include <asm/rsi_smc.h>
 
diff --git a/arch/arm64/include/asm/rsi_smc.h b/arch/arm64/include/asm/rsi_smc.h
index 6cb070eca9e9..e19253f96c94 100644
--- a/arch/arm64/include/asm/rsi_smc.h
+++ b/arch/arm64/include/asm/rsi_smc.h
@@ -122,7 +122,7 @@
  */
 #define SMC_RSI_ATTESTATION_TOKEN_CONTINUE	SMC_RSI_FID(0x195)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct realm_config {
 	union {
@@ -142,7 +142,7 @@ struct realm_config {
 	 */
 } __aligned(0x1000);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * Read configuration for the current Realm.
diff --git a/arch/arm64/include/asm/rwonce.h b/arch/arm64/include/asm/rwonce.h
index 56f7b1d4d54b..78beceec10cd 100644
--- a/arch/arm64/include/asm/rwonce.h
+++ b/arch/arm64/include/asm/rwonce.h
@@ -5,23 +5,19 @@
 #ifndef __ASM_RWONCE_H
 #define __ASM_RWONCE_H
 
-#if defined(CONFIG_LTO) && !defined(__ASSEMBLY__)
+#if defined(CONFIG_LTO) && !defined(__ASSEMBLER__)
 
 #include <linux/compiler_types.h>
 #include <asm/alternative-macros.h>
 
 #ifndef BUILD_VDSO
 
-#ifdef CONFIG_AS_HAS_LDAPR
 #define __LOAD_RCPC(sfx, regs...)					\
 	ALTERNATIVE(							\
 		"ldar"	#sfx "\t" #regs,				\
 		".arch_extension rcpc\n"				\
 		"ldapr"	#sfx "\t" #regs,				\
 	ARM64_HAS_LDAPR)
-#else
-#define __LOAD_RCPC(sfx, regs...)	"ldar" #sfx "\t" #regs
-#endif /* CONFIG_AS_HAS_LDAPR */
 
 /*
  * When building with LTO, there is an increased risk of the compiler
@@ -66,7 +62,7 @@
 })
 
 #endif	/* !BUILD_VDSO */
-#endif	/* CONFIG_LTO && !__ASSEMBLY__ */
+#endif	/* CONFIG_LTO && !__ASSEMBLER__ */
 
 #include <asm-generic/rwonce.h>
 
diff --git a/arch/arm64/include/asm/scs.h b/arch/arm64/include/asm/scs.h
index a76f9b387a26..0fbc2e7867d3 100644
--- a/arch/arm64/include/asm/scs.h
+++ b/arch/arm64/include/asm/scs.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_SCS_H
 #define _ASM_SCS_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #include <asm/asm-offsets.h>
 #include <asm/sysreg.h>
@@ -53,8 +53,8 @@ enum {
 	EDYNSCS_INVALID_CFA_OPCODE		= 4,
 };
 
-int __pi_scs_patch(const u8 eh_frame[], int size);
+int __pi_scs_patch(const u8 eh_frame[], int size, bool skip_dry_run);
 
-#endif /* __ASSEMBLY __ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_SCS_H */
diff --git a/arch/arm64/include/asm/sdei.h b/arch/arm64/include/asm/sdei.h
index 484cb6972e99..b2248bd3cb58 100644
--- a/arch/arm64/include/asm/sdei.h
+++ b/arch/arm64/include/asm/sdei.h
@@ -9,7 +9,7 @@
 
 #define SDEI_STACK_SIZE		IRQ_STACK_SIZE
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/linkage.h>
 #include <linux/preempt.h>
@@ -49,5 +49,5 @@ unsigned long do_sdei_event(struct pt_regs *regs,
 unsigned long sdei_arch_get_entry_point(int conduit);
 #define sdei_arch_get_entry_point(x)	sdei_arch_get_entry_point(x)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif	/* __ASM_SDEI_H */
diff --git a/arch/arm64/include/asm/seccomp.h b/arch/arm64/include/asm/seccomp.h
index b83975555314..bf6bf40bc5ab 100644
--- a/arch/arm64/include/asm/seccomp.h
+++ b/arch/arm64/include/asm/seccomp.h
@@ -23,7 +23,6 @@
 #define SECCOMP_ARCH_NATIVE_NR		NR_syscalls
 #define SECCOMP_ARCH_NATIVE_NAME	"aarch64"
 #ifdef CONFIG_COMPAT
-#include <asm/unistd_compat_32.h>
 # define SECCOMP_ARCH_COMPAT		AUDIT_ARCH_ARM
 # define SECCOMP_ARCH_COMPAT_NR		__NR_compat32_syscalls
 # define SECCOMP_ARCH_COMPAT_NAME	"arm"
diff --git a/arch/arm64/include/asm/sections.h b/arch/arm64/include/asm/sections.h
index 40971ac1303f..51b0d594239e 100644
--- a/arch/arm64/include/asm/sections.h
+++ b/arch/arm64/include/asm/sections.h
@@ -11,6 +11,7 @@ extern char __alt_instructions[], __alt_instructions_end[];
 extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[];
 extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
 extern char __hyp_text_start[], __hyp_text_end[];
+extern char __hyp_data_start[], __hyp_data_end[];
 extern char __hyp_rodata_start[], __hyp_rodata_end[];
 extern char __hyp_reloc_begin[], __hyp_reloc_end[];
 extern char __hyp_bss_start[], __hyp_bss_end[];
diff --git a/arch/arm64/include/asm/setup.h b/arch/arm64/include/asm/setup.h
index ba269a7a3201..3d96dde4d214 100644
--- a/arch/arm64/include/asm/setup.h
+++ b/arch/arm64/include/asm/setup.h
@@ -21,7 +21,7 @@ static inline bool arch_parse_debug_rodata(char *arg)
 	if (!arg)
 		return false;
 
-	if (!strcmp(arg, "full")) {
+	if (!strcmp(arg, "on")) {
 		rodata_enabled = rodata_full = true;
 		return true;
 	}
@@ -31,7 +31,7 @@ static inline bool arch_parse_debug_rodata(char *arg)
 		return true;
 	}
 
-	if (!strcmp(arg, "on")) {
+	if (!strcmp(arg, "noalias")) {
 		rodata_enabled = true;
 		rodata_full = false;
 		return true;
diff --git a/arch/arm64/include/asm/simd.h b/arch/arm64/include/asm/simd.h
index 8e86c9e70e48..0941f6f58a14 100644
--- a/arch/arm64/include/asm/simd.h
+++ b/arch/arm64/include/asm/simd.h
@@ -6,12 +6,15 @@
 #ifndef __ASM_SIMD_H
 #define __ASM_SIMD_H
 
+#include <linux/cleanup.h>
 #include <linux/compiler.h>
 #include <linux/irqflags.h>
 #include <linux/percpu.h>
 #include <linux/preempt.h>
 #include <linux/types.h>
 
+#include <asm/neon.h>
+
 #ifdef CONFIG_KERNEL_MODE_NEON
 
 /*
@@ -29,7 +32,7 @@ static __must_check inline bool may_use_simd(void)
 	 */
 	return !WARN_ON(!system_capabilities_finalized()) &&
 	       system_supports_fpsimd() &&
-	       !in_hardirq() && !irqs_disabled() && !in_nmi();
+	       !in_hardirq() && !in_nmi();
 }
 
 #else /* ! CONFIG_KERNEL_MODE_NEON */
@@ -40,4 +43,11 @@ static __must_check inline bool may_use_simd(void) {
 
 #endif /* ! CONFIG_KERNEL_MODE_NEON */
 
+DEFINE_LOCK_GUARD_1(ksimd,
+		    struct user_fpsimd_state,
+		    kernel_neon_begin(_T->lock),
+		    kernel_neon_end(_T->lock))
+
+#define scoped_ksimd()	scoped_guard(ksimd, &(struct user_fpsimd_state){})
+
 #endif
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index 2510eec026f7..10ea4f543069 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -23,7 +23,7 @@
 #define CPU_STUCK_REASON_52_BIT_VA	(UL(1) << CPU_STUCK_REASON_SHIFT)
 #define CPU_STUCK_REASON_NO_GRAN	(UL(2) << CPU_STUCK_REASON_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/threads.h>
 #include <linux/cpumask.h>
@@ -50,10 +50,32 @@ struct seq_file;
  */
 extern void smp_init_cpus(void);
 
+enum ipi_msg_type {
+	IPI_RESCHEDULE,
+	IPI_CALL_FUNC,
+	IPI_CPU_STOP,
+	IPI_CPU_STOP_NMI,
+	IPI_TIMER,
+	IPI_IRQ_WORK,
+	NR_IPI,
+	/*
+	 * Any enum >= NR_IPI and < MAX_IPI is special and not tracable
+	 * with trace_ipi_*
+	 */
+	IPI_CPU_BACKTRACE = NR_IPI,
+	IPI_KGDB_ROUNDUP,
+	MAX_IPI
+};
+
 /*
  * Register IPI interrupts with the arch SMP code
  */
-extern void set_smp_ipi_range(int ipi_base, int nr_ipi);
+extern void set_smp_ipi_range_percpu(int ipi_base, int nr_ipi, int ncpus);
+
+static inline void set_smp_ipi_range(int ipi_base, int n)
+{
+	set_smp_ipi_range_percpu(ipi_base, n, 0);
+}
 
 /*
  * Called from the secondary holding pen, this is the secondary CPU entry point.
@@ -133,6 +155,6 @@ bool cpus_are_stuck_in_kernel(void);
 extern void crash_smp_send_stop(void);
 extern bool smp_crash_stop_failed(void);
 
-#endif /* ifndef __ASSEMBLY__ */
+#endif /* ifndef __ASSEMBLER__ */
 
 #endif /* ifndef __ASM_SMP_H */
diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h
index 8a8acc220371..84783efdc9d1 100644
--- a/arch/arm64/include/asm/sparsemem.h
+++ b/arch/arm64/include/asm/sparsemem.h
@@ -5,7 +5,10 @@
 #ifndef __ASM_SPARSEMEM_H
 #define __ASM_SPARSEMEM_H
 
-#define MAX_PHYSMEM_BITS	CONFIG_ARM64_PA_BITS
+#include <asm/pgtable-prot.h>
+
+#define MAX_PHYSMEM_BITS		PHYS_MASK_SHIFT
+#define MAX_POSSIBLE_PHYSMEM_BITS	(52)
 
 /*
  * Section size must be at least 512MB for 64K base
diff --git a/arch/arm64/include/asm/spectre.h b/arch/arm64/include/asm/spectre.h
index 0c4d9045c31f..296ae3420bfd 100644
--- a/arch/arm64/include/asm/spectre.h
+++ b/arch/arm64/include/asm/spectre.h
@@ -12,7 +12,7 @@
 #define BP_HARDEN_EL2_SLOTS 4
 #define __BP_HARDEN_HYP_VECS_SZ	((BP_HARDEN_EL2_SLOTS - 1) * SZ_2K)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/smp.h>
 #include <asm/percpu.h>
 
@@ -97,7 +97,9 @@ enum mitigation_state arm64_get_meltdown_state(void);
 
 enum mitigation_state arm64_get_spectre_bhb_state(void);
 bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry, int scope);
-u8 spectre_bhb_loop_affected(int scope);
+extern bool __nospectre_bhb;
+u8 get_spectre_bhb_loop_value(void);
+bool is_spectre_bhb_fw_mitigated(void);
 void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *__unused);
 bool try_emulate_el1_ssbs(struct pt_regs *regs, u32 instr);
 
@@ -115,6 +117,7 @@ void spectre_bhb_patch_wa3(struct alt_instr *alt,
 			   __le32 *origptr, __le32 *updptr, int nr_inst);
 void spectre_bhb_patch_clearbhb(struct alt_instr *alt,
 				__le32 *origptr, __le32 *updptr, int nr_inst);
+void spectre_print_disabled_mitigations(void);
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 #endif	/* __ASM_SPECTRE_H */
diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h
index 66ec8caa6ac0..6d3280932bf5 100644
--- a/arch/arm64/include/asm/stacktrace.h
+++ b/arch/arm64/include/asm/stacktrace.h
@@ -59,7 +59,6 @@ static inline bool on_task_stack(const struct task_struct *tsk,
 
 #define on_thread_stack()	(on_task_stack(current, current_stack_pointer, 1))
 
-#ifdef CONFIG_VMAP_STACK
 DECLARE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack);
 
 static inline struct stack_info stackinfo_get_overflow(void)
@@ -72,11 +71,8 @@ static inline struct stack_info stackinfo_get_overflow(void)
 		.high = high,
 	};
 }
-#else
-#define stackinfo_get_overflow()	stackinfo_get_unknown()
-#endif
 
-#if defined(CONFIG_ARM_SDE_INTERFACE) && defined(CONFIG_VMAP_STACK)
+#if defined(CONFIG_ARM_SDE_INTERFACE)
 DECLARE_PER_CPU(unsigned long *, sdei_stack_normal_ptr);
 DECLARE_PER_CPU(unsigned long *, sdei_stack_critical_ptr);
 
diff --git a/arch/arm64/include/asm/stacktrace/frame.h b/arch/arm64/include/asm/stacktrace/frame.h
index 0ee0f6ba0fd8..796797b8db7e 100644
--- a/arch/arm64/include/asm/stacktrace/frame.h
+++ b/arch/arm64/include/asm/stacktrace/frame.h
@@ -25,7 +25,7 @@
 #define FRAME_META_TYPE_FINAL		1
 #define FRAME_META_TYPE_PT_REGS		2
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /* 
  * A standard AAPCS64 frame record.
  */
@@ -43,6 +43,6 @@ struct frame_record_meta {
 	struct frame_record record;
 	u64 type;
 };
-#endif /* __ASSEMBLY */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_STACKTRACE_FRAME_H */
diff --git a/arch/arm64/include/asm/stacktrace/nvhe.h b/arch/arm64/include/asm/stacktrace/nvhe.h
index 44759281d0d4..171f9edef49f 100644
--- a/arch/arm64/include/asm/stacktrace/nvhe.h
+++ b/arch/arm64/include/asm/stacktrace/nvhe.h
@@ -47,7 +47,7 @@ static inline void kvm_nvhe_unwind_init(struct unwind_state *state,
 
 DECLARE_KVM_NVHE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack);
 DECLARE_KVM_NVHE_PER_CPU(struct kvm_nvhe_stacktrace_info, kvm_stacktrace_info);
-DECLARE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
+DECLARE_PER_CPU(unsigned long, kvm_arm_hyp_stack_base);
 
 void kvm_nvhe_dump_backtrace(unsigned long hyp_offset);
 
diff --git a/arch/arm64/include/asm/suspend.h b/arch/arm64/include/asm/suspend.h
index 0cde2f473971..e65f33edf9d6 100644
--- a/arch/arm64/include/asm/suspend.h
+++ b/arch/arm64/include/asm/suspend.h
@@ -23,7 +23,7 @@ struct cpu_suspend_ctx {
  * __cpu_suspend_enter()'s caller, and populated by __cpu_suspend_enter().
  * This data must survive until cpu_resume() is called.
  *
- * This struct desribes the size and the layout of the saved cpu state.
+ * This struct describes the size and the layout of the saved cpu state.
  * The layout of the callee_saved_regs is defined by the implementation
  * of __cpu_suspend_enter(), and cpu_resume(). This struct must be passed
  * in by the caller as __cpu_suspend_enter()'s stack-frame is gone once it
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index ab8e14b96f68..712daa90e643 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -61,6 +61,22 @@ static inline void syscall_set_return_value(struct task_struct *task,
 	regs->regs[0] = val;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->syscallno = nr;
+	if (nr == -1) {
+		/*
+		 * When the syscall number is set to -1, the syscall will be
+		 * skipped.  In this case the syscall return value has to be
+		 * set explicitly, otherwise the first syscall argument is
+		 * returned as the syscall return value.
+		 */
+		syscall_set_return_value(task, regs, -ENOSYS, 0);
+	}
+}
+
 #define SYSCALL_MAX_ARGS 6
 
 static inline void syscall_get_arguments(struct task_struct *task,
@@ -73,6 +89,19 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	memcpy(args, &regs->regs[1], 5 * sizeof(args[0]));
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 const unsigned long *args)
+{
+	memcpy(&regs->regs[0], args, 6 * sizeof(args[0]));
+	/*
+	 * Also copy the first argument into orig_x0
+	 * so that syscall_get_arguments() would return it
+	 * instead of the previous value.
+	 */
+	regs->orig_x0 = regs->regs[0];
+}
+
 /*
  * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
  * AArch64 has the same system calls both on little- and big- endian.
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index b8303a83c0bf..9df51accbb02 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -12,6 +12,7 @@
 #include <linux/bits.h>
 #include <linux/stringify.h>
 #include <linux/kasan-tags.h>
+#include <linux/kconfig.h>
 
 #include <asm/gpr-num.h>
 
@@ -51,7 +52,7 @@
 
 #ifndef CONFIG_BROKEN_GAS_INST
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 // The space separator is omitted so that __emit_inst(x) can be parsed as
 // either an assembler directive or an assembler macro argument.
 #define __emit_inst(x)			.inst(x)
@@ -70,11 +71,11 @@
 					 (((x) >> 24) & 0x000000ff))
 #endif	/* CONFIG_CPU_BIG_ENDIAN */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define __emit_inst(x)			.long __INSTR_BSWAP(x)
-#else  /* __ASSEMBLY__ */
+#else  /* __ASSEMBLER__ */
 #define __emit_inst(x)			".long " __stringify(__INSTR_BSWAP(x)) "\n\t"
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* CONFIG_BROKEN_GAS_INST */
 
@@ -112,11 +113,16 @@
 /* Register-based PAN access, for save/restore purposes */
 #define SYS_PSTATE_PAN			sys_reg(3, 0, 4, 2, 3)
 
-#define __SYS_BARRIER_INSN(CRm, op2, Rt) \
-	__emit_inst(0xd5000000 | sys_insn(0, 3, 3, (CRm), (op2)) | ((Rt) & 0x1f))
+#define __SYS_BARRIER_INSN(op0, op1, CRn, CRm, op2, Rt)			\
+	__emit_inst(0xd5000000					|	\
+		    sys_insn((op0), (op1), (CRn), (CRm), (op2))	|	\
+		    ((Rt) & 0x1f))
 
-#define SB_BARRIER_INSN			__SYS_BARRIER_INSN(0, 7, 31)
+#define SB_BARRIER_INSN			__SYS_BARRIER_INSN(0, 3, 3, 0, 7, 31)
+#define GSB_SYS_BARRIER_INSN		__SYS_BARRIER_INSN(1, 0, 12, 0, 0, 31)
+#define GSB_ACK_BARRIER_INSN		__SYS_BARRIER_INSN(1, 0, 12, 0, 1, 31)
 
+/* Data cache zero operations */
 #define SYS_DC_ISW			sys_insn(1, 0, 7, 6, 2)
 #define SYS_DC_IGSW			sys_insn(1, 0, 7, 6, 4)
 #define SYS_DC_IGDSW			sys_insn(1, 0, 7, 6, 6)
@@ -153,11 +159,13 @@
 #define SYS_DC_CIGVAC			sys_insn(1, 3, 7, 14, 3)
 #define SYS_DC_CIGDVAC			sys_insn(1, 3, 7, 14, 5)
 
-/* Data cache zero operations */
 #define SYS_DC_ZVA			sys_insn(1, 3, 7, 4, 1)
 #define SYS_DC_GVA			sys_insn(1, 3, 7, 4, 3)
 #define SYS_DC_GZVA			sys_insn(1, 3, 7, 4, 4)
 
+#define SYS_DC_CIVAPS			sys_insn(1, 0, 7, 15, 1)
+#define SYS_DC_CIGDVAPS			sys_insn(1, 0, 7, 15, 5)
+
 /*
  * Automatically generated definitions for system registers, the
  * manual encodings below are in the process of being converted to
@@ -198,16 +206,8 @@
 #define SYS_DBGVCR32_EL2		sys_reg(2, 4, 0, 7, 0)
 
 #define SYS_BRBINF_EL1(n)		sys_reg(2, 1, 8, (n & 15), (((n & 16) >> 2) | 0))
-#define SYS_BRBINFINJ_EL1		sys_reg(2, 1, 9, 1, 0)
 #define SYS_BRBSRC_EL1(n)		sys_reg(2, 1, 8, (n & 15), (((n & 16) >> 2) | 1))
-#define SYS_BRBSRCINJ_EL1		sys_reg(2, 1, 9, 1, 1)
 #define SYS_BRBTGT_EL1(n)		sys_reg(2, 1, 8, (n & 15), (((n & 16) >> 2) | 2))
-#define SYS_BRBTGTINJ_EL1		sys_reg(2, 1, 9, 1, 2)
-#define SYS_BRBTS_EL1			sys_reg(2, 1, 9, 0, 2)
-
-#define SYS_BRBCR_EL1			sys_reg(2, 1, 9, 0, 0)
-#define SYS_BRBFCR_EL1			sys_reg(2, 1, 9, 0, 1)
-#define SYS_BRBIDR0_EL1			sys_reg(2, 1, 9, 2, 0)
 
 #define SYS_TRCITECR_EL1		sys_reg(3, 0, 1, 2, 3)
 #define SYS_TRCACATR(m)			sys_reg(2, 1, 2, ((m & 7) << 1), (2 | (m >> 3)))
@@ -273,8 +273,6 @@
 /* ETM */
 #define SYS_TRCOSLAR			sys_reg(2, 1, 1, 0, 4)
 
-#define SYS_BRBCR_EL2			sys_reg(2, 4, 9, 0, 0)
-
 #define SYS_MIDR_EL1			sys_reg(3, 0, 0, 0, 0)
 #define SYS_MPIDR_EL1			sys_reg(3, 0, 0, 0, 5)
 #define SYS_REVIDR_EL1			sys_reg(3, 0, 0, 0, 6)
@@ -283,10 +281,6 @@
 #define SYS_RGSR_EL1			sys_reg(3, 0, 1, 0, 5)
 #define SYS_GCR_EL1			sys_reg(3, 0, 1, 0, 6)
 
-#define SYS_TRFCR_EL1			sys_reg(3, 0, 1, 2, 1)
-
-#define SYS_TCR_EL1			sys_reg(3, 0, 2, 0, 2)
-
 #define SYS_APIAKEYLO_EL1		sys_reg(3, 0, 2, 1, 0)
 #define SYS_APIAKEYHI_EL1		sys_reg(3, 0, 2, 1, 1)
 #define SYS_APIBKEYLO_EL1		sys_reg(3, 0, 2, 1, 2)
@@ -348,15 +342,6 @@
 #define SYS_PAR_EL1_ATTR		GENMASK_ULL(63, 56)
 #define SYS_PAR_EL1_F0_RES0		(GENMASK_ULL(6, 1) | GENMASK_ULL(55, 52))
 
-/*** Statistical Profiling Extension ***/
-#define PMSEVFR_EL1_RES0_IMP	\
-	(GENMASK_ULL(47, 32) | GENMASK_ULL(23, 16) | GENMASK_ULL(11, 8) |\
-	 BIT_ULL(6) | BIT_ULL(4) | BIT_ULL(2) | BIT_ULL(0))
-#define PMSEVFR_EL1_RES0_V1P1	\
-	(PMSEVFR_EL1_RES0_IMP & ~(BIT_ULL(18) | BIT_ULL(17) | BIT_ULL(11)))
-#define PMSEVFR_EL1_RES0_V1P2	\
-	(PMSEVFR_EL1_RES0_V1P1 & ~BIT_ULL(6))
-
 /* Buffer error reporting */
 #define PMBSR_EL1_FAULT_FSC_SHIFT	PMBSR_EL1_MSS_SHIFT
 #define PMBSR_EL1_FAULT_FSC_MASK	PMBSR_EL1_MSS_MASK
@@ -477,6 +462,7 @@
 #define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 
 #define SYS_CNTPCT_EL0			sys_reg(3, 3, 14, 0, 1)
+#define SYS_CNTVCT_EL0			sys_reg(3, 3, 14, 0, 2)
 #define SYS_CNTPCTSS_EL0		sys_reg(3, 3, 14, 0, 5)
 #define SYS_CNTVCTSS_EL0		sys_reg(3, 3, 14, 0, 6)
 
@@ -484,23 +470,36 @@
 #define SYS_CNTP_CTL_EL0		sys_reg(3, 3, 14, 2, 1)
 #define SYS_CNTP_CVAL_EL0		sys_reg(3, 3, 14, 2, 2)
 
+#define SYS_CNTV_TVAL_EL0		sys_reg(3, 3, 14, 3, 0)
 #define SYS_CNTV_CTL_EL0		sys_reg(3, 3, 14, 3, 1)
 #define SYS_CNTV_CVAL_EL0		sys_reg(3, 3, 14, 3, 2)
 
 #define SYS_AARCH32_CNTP_TVAL		sys_reg(0, 0, 14, 2, 0)
 #define SYS_AARCH32_CNTP_CTL		sys_reg(0, 0, 14, 2, 1)
 #define SYS_AARCH32_CNTPCT		sys_reg(0, 0, 0, 14, 0)
+#define SYS_AARCH32_CNTVCT		sys_reg(0, 1, 0, 14, 0)
 #define SYS_AARCH32_CNTP_CVAL		sys_reg(0, 2, 0, 14, 0)
 #define SYS_AARCH32_CNTPCTSS		sys_reg(0, 8, 0, 14, 0)
+#define SYS_AARCH32_CNTVCTSS		sys_reg(0, 9, 0, 14, 0)
 
 #define __PMEV_op2(n)			((n) & 0x7)
 #define __CNTR_CRm(n)			(0x8 | (((n) >> 3) & 0x3))
+#define SYS_PMEVCNTSVRn_EL1(n)		sys_reg(2, 0, 14, __CNTR_CRm(n), __PMEV_op2(n))
 #define SYS_PMEVCNTRn_EL0(n)		sys_reg(3, 3, 14, __CNTR_CRm(n), __PMEV_op2(n))
 #define __TYPER_CRm(n)			(0xc | (((n) >> 3) & 0x3))
 #define SYS_PMEVTYPERn_EL0(n)		sys_reg(3, 3, 14, __TYPER_CRm(n), __PMEV_op2(n))
 
 #define SYS_PMCCFILTR_EL0		sys_reg(3, 3, 14, 15, 7)
 
+#define	SYS_SPMCGCRn_EL1(n)		sys_reg(2, 0, 9, 13, ((n) & 1))
+
+#define __SPMEV_op2(n)			((n) & 0x7)
+#define __SPMEV_crm(p, n)		((((p) & 7) << 1) | (((n) >> 3) & 1))
+#define SYS_SPMEVCNTRn_EL0(n)		sys_reg(2, 3, 14, __SPMEV_crm(0b000, n), __SPMEV_op2(n))
+#define	SYS_SPMEVFILT2Rn_EL0(n)		sys_reg(2, 3, 14, __SPMEV_crm(0b011, n), __SPMEV_op2(n))
+#define	SYS_SPMEVFILTRn_EL0(n)		sys_reg(2, 3, 14, __SPMEV_crm(0b010, n), __SPMEV_op2(n))
+#define	SYS_SPMEVTYPERn_EL0(n)		sys_reg(2, 3, 14, __SPMEV_crm(0b001, n), __SPMEV_op2(n))
+
 #define SYS_VPIDR_EL2			sys_reg(3, 4, 0, 0, 0)
 #define SYS_VMPIDR_EL2			sys_reg(3, 4, 0, 0, 5)
 
@@ -519,8 +518,6 @@
 #define SYS_VTTBR_EL2			sys_reg(3, 4, 2, 1, 0)
 #define SYS_VTCR_EL2			sys_reg(3, 4, 2, 1, 2)
 
-#define SYS_TRFCR_EL2			sys_reg(3, 4, 1, 2, 1)
-#define SYS_VNCR_EL2			sys_reg(3, 4, 2, 2, 0)
 #define SYS_HAFGRTR_EL2			sys_reg(3, 4, 3, 1, 6)
 #define SYS_SPSR_EL2			sys_reg(3, 4, 4, 0, 0)
 #define SYS_ELR_EL2			sys_reg(3, 4, 4, 0, 1)
@@ -561,9 +558,6 @@
 
 #define SYS_ICH_VSEIR_EL2		sys_reg(3, 4, 12, 9, 4)
 #define SYS_ICC_SRE_EL2			sys_reg(3, 4, 12, 9, 5)
-#define SYS_ICH_HCR_EL2			sys_reg(3, 4, 12, 11, 0)
-#define SYS_ICH_VTR_EL2			sys_reg(3, 4, 12, 11, 1)
-#define SYS_ICH_MISR_EL2		sys_reg(3, 4, 12, 11, 2)
 #define SYS_ICH_EISR_EL2		sys_reg(3, 4, 12, 11, 3)
 #define SYS_ICH_ELRSR_EL2		sys_reg(3, 4, 12, 11, 5)
 #define SYS_ICH_VMCR_EL2		sys_reg(3, 4, 12, 11, 7)
@@ -610,28 +604,18 @@
 
 /* VHE encodings for architectural EL0/1 system registers */
 #define SYS_BRBCR_EL12			sys_reg(2, 5, 9, 0, 0)
-#define SYS_SCTLR_EL12			sys_reg(3, 5, 1, 0, 0)
-#define SYS_CPACR_EL12			sys_reg(3, 5, 1, 0, 2)
-#define SYS_SCTLR2_EL12			sys_reg(3, 5, 1, 0, 3)
-#define SYS_ZCR_EL12			sys_reg(3, 5, 1, 2, 0)
-#define SYS_TRFCR_EL12			sys_reg(3, 5, 1, 2, 1)
-#define SYS_SMCR_EL12			sys_reg(3, 5, 1, 2, 6)
 #define SYS_TTBR0_EL12			sys_reg(3, 5, 2, 0, 0)
 #define SYS_TTBR1_EL12			sys_reg(3, 5, 2, 0, 1)
-#define SYS_TCR_EL12			sys_reg(3, 5, 2, 0, 2)
-#define SYS_TCR2_EL12			sys_reg(3, 5, 2, 0, 3)
 #define SYS_SPSR_EL12			sys_reg(3, 5, 4, 0, 0)
 #define SYS_ELR_EL12			sys_reg(3, 5, 4, 0, 1)
 #define SYS_AFSR0_EL12			sys_reg(3, 5, 5, 1, 0)
 #define SYS_AFSR1_EL12			sys_reg(3, 5, 5, 1, 1)
 #define SYS_ESR_EL12			sys_reg(3, 5, 5, 2, 0)
 #define SYS_TFSR_EL12			sys_reg(3, 5, 5, 6, 0)
-#define SYS_FAR_EL12			sys_reg(3, 5, 6, 0, 0)
 #define SYS_PMSCR_EL12			sys_reg(3, 5, 9, 9, 0)
 #define SYS_MAIR_EL12			sys_reg(3, 5, 10, 2, 0)
 #define SYS_AMAIR_EL12			sys_reg(3, 5, 10, 3, 0)
 #define SYS_VBAR_EL12			sys_reg(3, 5, 12, 0, 0)
-#define SYS_CONTEXTIDR_EL12		sys_reg(3, 5, 13, 0, 1)
 #define SYS_SCXTNUM_EL12		sys_reg(3, 5, 13, 0, 7)
 #define SYS_CNTKCTL_EL12		sys_reg(3, 5, 14, 1, 0)
 #define SYS_CNTP_TVAL_EL02		sys_reg(3, 5, 14, 2, 0)
@@ -820,6 +804,12 @@
 #define OP_COSP_RCTX			sys_insn(1, 3, 7, 3, 6)
 #define OP_CPP_RCTX			sys_insn(1, 3, 7, 3, 7)
 
+/*
+ * BRBE Instructions
+ */
+#define BRB_IALL_INSN	__emit_inst(0xd5000000 | OP_BRB_IALL | (0x1f))
+#define BRB_INJ_INSN	__emit_inst(0xd5000000 | OP_BRB_INJ  | (0x1f))
+
 /* Common SCTLR_ELx flags. */
 #define SCTLR_ELx_ENTP2	(BIT(60))
 #define SCTLR_ELx_DSSBS	(BIT(44))
@@ -983,20 +973,7 @@
 /* Safe value for MPIDR_EL1: Bit31:RES1, Bit30:U:0, Bit24:MT:0 */
 #define SYS_MPIDR_SAFE_VAL	(BIT(31))
 
-#define TRFCR_ELx_TS_SHIFT		5
-#define TRFCR_ELx_TS_MASK		((0x3UL) << TRFCR_ELx_TS_SHIFT)
-#define TRFCR_ELx_TS_VIRTUAL		((0x1UL) << TRFCR_ELx_TS_SHIFT)
-#define TRFCR_ELx_TS_GUEST_PHYSICAL	((0x2UL) << TRFCR_ELx_TS_SHIFT)
-#define TRFCR_ELx_TS_PHYSICAL		((0x3UL) << TRFCR_ELx_TS_SHIFT)
-#define TRFCR_EL2_CX			BIT(3)
-#define TRFCR_ELx_ExTRE			BIT(1)
-#define TRFCR_ELx_E0TRE			BIT(0)
-
 /* GIC Hypervisor interface registers */
-/* ICH_MISR_EL2 bit definitions */
-#define ICH_MISR_EOI		(1 << 0)
-#define ICH_MISR_U		(1 << 1)
-
 /* ICH_LR*_EL2 bit definitions */
 #define ICH_LR_VIRTUAL_ID_MASK	((1ULL << 32) - 1)
 
@@ -1011,17 +988,6 @@
 #define ICH_LR_PRIORITY_SHIFT	48
 #define ICH_LR_PRIORITY_MASK	(0xffULL << ICH_LR_PRIORITY_SHIFT)
 
-/* ICH_HCR_EL2 bit definitions */
-#define ICH_HCR_EN		(1 << 0)
-#define ICH_HCR_UIE		(1 << 1)
-#define ICH_HCR_NPIE		(1 << 3)
-#define ICH_HCR_TC		(1 << 10)
-#define ICH_HCR_TALL0		(1 << 11)
-#define ICH_HCR_TALL1		(1 << 12)
-#define ICH_HCR_TDIR		(1 << 14)
-#define ICH_HCR_EOIcount_SHIFT	27
-#define ICH_HCR_EOIcount_MASK	(0x1f << ICH_HCR_EOIcount_SHIFT)
-
 /* ICH_VMCR_EL2 bit definitions */
 #define ICH_VMCR_ACK_CTL_SHIFT	2
 #define ICH_VMCR_ACK_CTL_MASK	(1 << ICH_VMCR_ACK_CTL_SHIFT)
@@ -1042,18 +1008,6 @@
 #define ICH_VMCR_ENG1_SHIFT	1
 #define ICH_VMCR_ENG1_MASK	(1 << ICH_VMCR_ENG1_SHIFT)
 
-/* ICH_VTR_EL2 bit definitions */
-#define ICH_VTR_PRI_BITS_SHIFT	29
-#define ICH_VTR_PRI_BITS_MASK	(7 << ICH_VTR_PRI_BITS_SHIFT)
-#define ICH_VTR_ID_BITS_SHIFT	23
-#define ICH_VTR_ID_BITS_MASK	(7 << ICH_VTR_ID_BITS_SHIFT)
-#define ICH_VTR_SEIS_SHIFT	22
-#define ICH_VTR_SEIS_MASK	(1 << ICH_VTR_SEIS_SHIFT)
-#define ICH_VTR_A3V_SHIFT	21
-#define ICH_VTR_A3V_MASK	(1 << ICH_VTR_A3V_SHIFT)
-#define ICH_VTR_TDS_SHIFT	19
-#define ICH_VTR_TDS_MASK	(1 << ICH_VTR_TDS_SHIFT)
-
 /*
  * Permission Indirection Extension (PIE) permission encodings.
  * Encodings with the _O suffix, have overlays applied (Permission Overlay Extension).
@@ -1070,8 +1024,11 @@
 #define PIE_RX		UL(0xa)
 #define PIE_RW		UL(0xc)
 #define PIE_RWX		UL(0xe)
+#define PIE_MASK	UL(0xf)
 
-#define PIRx_ELx_PERM(idx, perm)	((perm) << ((idx) * 4))
+#define PIRx_ELx_BITS_PER_IDX		4
+#define PIRx_ELx_PERM_SHIFT(idx)	((idx) * PIRx_ELx_BITS_PER_IDX)
+#define PIRx_ELx_PERM_PREP(idx, perm)	(((perm) & PIE_MASK) << PIRx_ELx_PERM_SHIFT(idx))
 
 /*
  * Permission Overlay Extension (POE) permission encodings.
@@ -1082,12 +1039,14 @@
 #define POE_RX		UL(0x3)
 #define POE_W		UL(0x4)
 #define POE_RW		UL(0x5)
-#define POE_XW		UL(0x6)
-#define POE_RXW		UL(0x7)
+#define POE_WX		UL(0x6)
+#define POE_RWX		UL(0x7)
 #define POE_MASK	UL(0xf)
 
-/* Initial value for Permission Overlay Extension for EL0 */
-#define POR_EL0_INIT	POE_RXW
+#define POR_ELx_BITS_PER_IDX		4
+#define POR_ELx_PERM_SHIFT(idx)		((idx) * POR_ELx_BITS_PER_IDX)
+#define POR_ELx_PERM_GET(idx, reg)	(((reg) >> POR_ELx_PERM_SHIFT(idx)) & POE_MASK)
+#define POR_ELx_PERM_PREP(idx, perm)	(((perm) & POE_MASK) << POR_ELx_PERM_SHIFT(idx))
 
 /*
  * Definitions for Guarded Control Stack
@@ -1108,13 +1067,69 @@
 
 #define GCS_CAP(x)	((((unsigned long)x) & GCS_CAP_ADDR_MASK) | \
 					       GCS_CAP_VALID_TOKEN)
-
-#define ARM64_FEATURE_FIELD_BITS	4
-
-/* Defined for compatibility only, do not add new users. */
-#define ARM64_FEATURE_MASK(x)	(x##_MASK)
-
-#ifdef __ASSEMBLY__
+/*
+ * Definitions for GICv5 instructions
+ */
+#define GICV5_OP_GIC_CDAFF		sys_insn(1, 0, 12, 1, 3)
+#define GICV5_OP_GIC_CDDI		sys_insn(1, 0, 12, 2, 0)
+#define GICV5_OP_GIC_CDDIS		sys_insn(1, 0, 12, 1, 0)
+#define GICV5_OP_GIC_CDHM		sys_insn(1, 0, 12, 2, 1)
+#define GICV5_OP_GIC_CDEN		sys_insn(1, 0, 12, 1, 1)
+#define GICV5_OP_GIC_CDEOI		sys_insn(1, 0, 12, 1, 7)
+#define GICV5_OP_GIC_CDPEND		sys_insn(1, 0, 12, 1, 4)
+#define GICV5_OP_GIC_CDPRI		sys_insn(1, 0, 12, 1, 2)
+#define GICV5_OP_GIC_CDRCFG		sys_insn(1, 0, 12, 1, 5)
+#define GICV5_OP_GICR_CDIA		sys_insn(1, 0, 12, 3, 0)
+
+/* Definitions for GIC CDAFF */
+#define GICV5_GIC_CDAFF_IAFFID_MASK	GENMASK_ULL(47, 32)
+#define GICV5_GIC_CDAFF_TYPE_MASK	GENMASK_ULL(31, 29)
+#define GICV5_GIC_CDAFF_IRM_MASK	BIT_ULL(28)
+#define GICV5_GIC_CDAFF_ID_MASK		GENMASK_ULL(23, 0)
+
+/* Definitions for GIC CDDI */
+#define GICV5_GIC_CDDI_TYPE_MASK	GENMASK_ULL(31, 29)
+#define GICV5_GIC_CDDI_ID_MASK		GENMASK_ULL(23, 0)
+
+/* Definitions for GIC CDDIS */
+#define GICV5_GIC_CDDIS_TYPE_MASK	GENMASK_ULL(31, 29)
+#define GICV5_GIC_CDDIS_TYPE(r)		FIELD_GET(GICV5_GIC_CDDIS_TYPE_MASK, r)
+#define GICV5_GIC_CDDIS_ID_MASK		GENMASK_ULL(23, 0)
+#define GICV5_GIC_CDDIS_ID(r)		FIELD_GET(GICV5_GIC_CDDIS_ID_MASK, r)
+
+/* Definitions for GIC CDEN */
+#define GICV5_GIC_CDEN_TYPE_MASK	GENMASK_ULL(31, 29)
+#define GICV5_GIC_CDEN_ID_MASK		GENMASK_ULL(23, 0)
+
+/* Definitions for GIC CDHM */
+#define GICV5_GIC_CDHM_HM_MASK		BIT_ULL(32)
+#define GICV5_GIC_CDHM_TYPE_MASK	GENMASK_ULL(31, 29)
+#define GICV5_GIC_CDHM_ID_MASK		GENMASK_ULL(23, 0)
+
+/* Definitions for GIC CDPEND */
+#define GICV5_GIC_CDPEND_PENDING_MASK	BIT_ULL(32)
+#define GICV5_GIC_CDPEND_TYPE_MASK	GENMASK_ULL(31, 29)
+#define GICV5_GIC_CDPEND_ID_MASK	GENMASK_ULL(23, 0)
+
+/* Definitions for GIC CDPRI */
+#define GICV5_GIC_CDPRI_PRIORITY_MASK	GENMASK_ULL(39, 35)
+#define GICV5_GIC_CDPRI_TYPE_MASK	GENMASK_ULL(31, 29)
+#define GICV5_GIC_CDPRI_ID_MASK		GENMASK_ULL(23, 0)
+
+/* Definitions for GIC CDRCFG */
+#define GICV5_GIC_CDRCFG_TYPE_MASK	GENMASK_ULL(31, 29)
+#define GICV5_GIC_CDRCFG_ID_MASK	GENMASK_ULL(23, 0)
+
+/* Definitions for GICR CDIA */
+#define GICV5_GIC_CDIA_VALID_MASK	BIT_ULL(32)
+#define GICV5_GICR_CDIA_VALID(r)	FIELD_GET(GICV5_GIC_CDIA_VALID_MASK, r)
+#define GICV5_GIC_CDIA_TYPE_MASK	GENMASK_ULL(31, 29)
+#define GICV5_GIC_CDIA_ID_MASK		GENMASK_ULL(23, 0)
+
+#define gicr_insn(insn)			read_sysreg_s(GICV5_OP_GICR_##insn)
+#define gic_insn(v, insn)		write_sysreg_s(v, GICV5_OP_GIC_##insn)
+
+#ifdef __ASSEMBLER__
 
 	.macro	mrs_s, rt, sreg
 	 __emit_inst(0xd5200000|(\sreg)|(.L__gpr_num_\rt))
@@ -1124,6 +1139,15 @@
 	__emit_inst(0xd5000000|(\sreg)|(.L__gpr_num_\rt))
 	.endm
 
+	.macro	msr_hcr_el2, reg
+#if IS_ENABLED(CONFIG_AMPERE_ERRATUM_AC04_CPU_23)
+	dsb	nsh
+	msr	hcr_el2, \reg
+	isb
+#else
+	msr	hcr_el2, \reg
+#endif
+	.endm
 #else
 
 #include <linux/bitfield.h>
@@ -1194,10 +1218,19 @@
 	__val;								\
 })
 
+/*
+ * The "Z" constraint combined with the "%x0" template should be enough
+ * to force XZR generation if (v) is a constant 0 value but LLVM does not
+ * yet understand that modifier/constraint combo so a conditional is required
+ * to nudge the compiler into using XZR as a source for a 0 constant value.
+ */
 #define write_sysreg_s(v, r) do {					\
 	u64 __val = (u64)(v);						\
 	u32 __maybe_unused __check_r = (u32)(r);			\
-	asm volatile(__msr_s(r, "%x0") : : "rZ" (__val));		\
+	if (__builtin_constant_p(__val) && __val == 0)			\
+		asm volatile(__msr_s(r, "xzr"));			\
+	else								\
+		asm volatile(__msr_s(r, "%x0") : : "r" (__val));	\
 } while (0)
 
 /*
@@ -1211,6 +1244,13 @@
 		write_sysreg(__scs_new, sysreg);			\
 } while (0)
 
+#define sysreg_clear_set_hcr(clear, set) do {				\
+	u64 __scs_val = read_sysreg(hcr_el2);				\
+	u64 __scs_new = (__scs_val & ~(u64)(clear)) | (set);		\
+	if (__scs_new != __scs_val)					\
+		write_sysreg_hcr(__scs_new);			\
+} while (0)
+
 #define sysreg_clear_set_s(sysreg, clear, set) do {			\
 	u64 __scs_val = read_sysreg_s(sysreg);				\
 	u64 __scs_new = (__scs_val & ~(u64)(clear)) | (set);		\
@@ -1218,6 +1258,17 @@
 		write_sysreg_s(__scs_new, sysreg);			\
 } while (0)
 
+#define write_sysreg_hcr(__val) do {					\
+	if (IS_ENABLED(CONFIG_AMPERE_ERRATUM_AC04_CPU_23) &&		\
+	   (!system_capabilities_finalized() ||				\
+	    alternative_has_cap_unlikely(ARM64_WORKAROUND_AMPERE_AC04_CPU_23))) \
+		asm volatile("dsb nsh; msr hcr_el2, %x0; isb"		\
+			     : : "rZ" (__val));				\
+	else								\
+		asm volatile("msr hcr_el2, %x0"				\
+			     : : "rZ" (__val));				\
+} while (0)
+
 #define read_sysreg_par() ({						\
 	u64 par;							\
 	asm(ALTERNATIVE("nop", "dmb sy", ARM64_WORKAROUND_1508412));	\
diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h
index c34344256762..d316a804eb38 100644
--- a/arch/arm64/include/asm/system_misc.h
+++ b/arch/arm64/include/asm/system_misc.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_SYSTEM_MISC_H
 #define __ASM_SYSTEM_MISC_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/compiler.h>
 #include <linux/linkage.h>
@@ -25,13 +25,9 @@ void arm64_notify_die(const char *str, struct pt_regs *regs,
 		      int signo, int sicode, unsigned long far,
 		      unsigned long err);
 
-void hook_debug_fault_code(int nr, int (*fn)(unsigned long, unsigned long,
-					     struct pt_regs *),
-			   int sig, int code, const char *name);
-
 struct mm_struct;
 extern void __show_regs(struct pt_regs *);
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* __ASM_SYSTEM_MISC_H */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 1114c1c3300a..a803b887b0b4 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -10,7 +10,7 @@
 
 #include <linux/compiler.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct task_struct;
 
@@ -59,16 +59,18 @@ void arch_setup_new_exec(void);
 
 #define TIF_SIGPENDING		0	/* signal pending */
 #define TIF_NEED_RESCHED	1	/* rescheduling necessary */
-#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
-#define TIF_FOREIGN_FPSTATE	3	/* CPU's FP state is not current's */
-#define TIF_UPROBE		4	/* uprobe breakpoint or singlestep */
-#define TIF_MTE_ASYNC_FAULT	5	/* MTE Asynchronous Tag Check Fault */
-#define TIF_NOTIFY_SIGNAL	6	/* signal notifications exist */
+#define TIF_NEED_RESCHED_LAZY	2	/* Lazy rescheduling needed */
+#define TIF_NOTIFY_RESUME	3	/* callback before returning to user */
+#define TIF_FOREIGN_FPSTATE	4	/* CPU's FP state is not current's */
+#define TIF_UPROBE		5	/* uprobe breakpoint or singlestep */
+#define TIF_MTE_ASYNC_FAULT	6	/* MTE Asynchronous Tag Check Fault */
+#define TIF_NOTIFY_SIGNAL	7	/* signal notifications exist */
 #define TIF_SYSCALL_TRACE	8	/* syscall trace active */
 #define TIF_SYSCALL_AUDIT	9	/* syscall auditing */
 #define TIF_SYSCALL_TRACEPOINT	10	/* syscall tracepoint for ftrace */
 #define TIF_SECCOMP		11	/* syscall secure computing */
 #define TIF_SYSCALL_EMU		12	/* syscall emulation active */
+#define TIF_PATCH_PENDING	13	/* pending live patching update */
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
 #define TIF_RESTORE_SIGMASK	20
@@ -82,9 +84,12 @@ void arch_setup_new_exec(void);
 #define TIF_SME_VL_INHERIT	28	/* Inherit SME vl_onexec across exec */
 #define TIF_KERNEL_FPSTATE	29	/* Task is in a kernel mode FPSIMD section */
 #define TIF_TSC_SIGSEGV		30	/* SIGSEGV on counter-timer access */
+#define TIF_LAZY_MMU		31	/* Task in lazy mmu mode */
+#define TIF_LAZY_MMU_PENDING	32	/* Ops pending for lazy mmu mode exit */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_NEED_RESCHED_LAZY	(1 << TIF_NEED_RESCHED_LAZY)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_FOREIGN_FPSTATE	(1 << TIF_FOREIGN_FPSTATE)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
@@ -92,6 +97,7 @@ void arch_setup_new_exec(void);
 #define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
+#define _TIF_PATCH_PENDING	(1 << TIF_PATCH_PENDING)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_32BIT		(1 << TIF_32BIT)
@@ -100,10 +106,11 @@ void arch_setup_new_exec(void);
 #define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
 #define _TIF_TSC_SIGSEGV	(1 << TIF_TSC_SIGSEGV)
 
-#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
+#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_NEED_RESCHED_LAZY | \
 				 _TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE | \
 				 _TIF_UPROBE | _TIF_MTE_ASYNC_FAULT | \
-				 _TIF_NOTIFY_SIGNAL)
+				 _TIF_NOTIFY_SIGNAL | _TIF_SIGPENDING | \
+				 _TIF_PATCH_PENDING)
 
 #define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
 				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \
diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h
index a947c6e784ed..8d762607285c 100644
--- a/arch/arm64/include/asm/tlb.h
+++ b/arch/arm64/include/asm/tlb.h
@@ -9,12 +9,7 @@
 #define __ASM_TLB_H
 
 #include <linux/pagemap.h>
-#include <linux/swap.h>
 
-static inline void __tlb_remove_table(void *_table)
-{
-	free_page_and_swap_cache((struct page *)_table);
-}
 
 #define tlb_flush tlb_flush
 static void tlb_flush(struct mmu_gather *tlb);
@@ -82,7 +77,6 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 {
 	struct ptdesc *ptdesc = page_ptdesc(pte);
 
-	pagetable_pte_dtor(ptdesc);
 	tlb_remove_ptdesc(tlb, ptdesc);
 }
 
@@ -92,7 +86,6 @@ static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
 {
 	struct ptdesc *ptdesc = virt_to_ptdesc(pmdp);
 
-	pagetable_pmd_dtor(ptdesc);
 	tlb_remove_ptdesc(tlb, ptdesc);
 }
 #endif
@@ -106,7 +99,19 @@ static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pudp,
 	if (!pgtable_l4_enabled())
 		return;
 
-	pagetable_pud_dtor(ptdesc);
+	tlb_remove_ptdesc(tlb, ptdesc);
+}
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 4
+static inline void __p4d_free_tlb(struct mmu_gather *tlb, p4d_t *p4dp,
+				  unsigned long addr)
+{
+	struct ptdesc *ptdesc = virt_to_ptdesc(p4dp);
+
+	if (!pgtable_l5_enabled())
+		return;
+
 	tlb_remove_ptdesc(tlb, ptdesc);
 }
 #endif
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
index bc94e036a26b..a2d65d7d6aae 100644
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_TLBFLUSH_H
 #define __ASM_TLBFLUSH_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/bitfield.h>
 #include <linux/mm_types.h>
@@ -249,6 +249,19 @@ static inline unsigned long get_trans_granule(void)
  *		cannot be easily determined, the value TLBI_TTL_UNKNOWN will
  *		perform a non-hinted invalidation.
  *
+ *	local_flush_tlb_page(vma, addr)
+ *		Local variant of flush_tlb_page().  Stale TLB entries may
+ *		remain in remote CPUs.
+ *
+ *	local_flush_tlb_page_nonotify(vma, addr)
+ *		Same as local_flush_tlb_page() except MMU notifier will not be
+ *		called.
+ *
+ *	local_flush_tlb_contpte(vma, addr)
+ *		Invalidate the virtual-address range
+ *		'[addr, addr+CONT_PTE_SIZE)' mapped with contpte on local CPU
+ *		for the user address space corresponding to 'vma->mm'.  Stale
+ *		TLB entries may remain in remote CPUs.
  *
  *	Finally, take a look at asm/tlb.h to see how tlb_flush() is implemented
  *	on top of these routines, since that is our interface to the mmu_gather
@@ -282,6 +295,33 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
 	mmu_notifier_arch_invalidate_secondary_tlbs(mm, 0, -1UL);
 }
 
+static inline void __local_flush_tlb_page_nonotify_nosync(struct mm_struct *mm,
+							  unsigned long uaddr)
+{
+	unsigned long addr;
+
+	dsb(nshst);
+	addr = __TLBI_VADDR(uaddr, ASID(mm));
+	__tlbi(vale1, addr);
+	__tlbi_user(vale1, addr);
+}
+
+static inline void local_flush_tlb_page_nonotify(struct vm_area_struct *vma,
+						 unsigned long uaddr)
+{
+	__local_flush_tlb_page_nonotify_nosync(vma->vm_mm, uaddr);
+	dsb(nsh);
+}
+
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
+					unsigned long uaddr)
+{
+	__local_flush_tlb_page_nonotify_nosync(vma->vm_mm, uaddr);
+	mmu_notifier_arch_invalidate_secondary_tlbs(vma->vm_mm, uaddr & PAGE_MASK,
+						(uaddr & PAGE_MASK) + PAGE_SIZE);
+	dsb(nsh);
+}
+
 static inline void __flush_tlb_page_nosync(struct mm_struct *mm,
 					   unsigned long uaddr)
 {
@@ -322,23 +362,6 @@ static inline bool arch_tlbbatch_should_defer(struct mm_struct *mm)
 	return true;
 }
 
-static inline void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch,
-					     struct mm_struct *mm,
-					     unsigned long uaddr)
-{
-	__flush_tlb_page_nosync(mm, uaddr);
-}
-
-/*
- * If mprotect/munmap/etc occurs during TLB batched flushing, we need to
- * synchronise all the TLBI issued with a DSB to avoid the race mentioned in
- * flush_tlb_batched_pending().
- */
-static inline void arch_flush_tlb_batched_pending(struct mm_struct *mm)
-{
-	dsb(ish);
-}
-
 /*
  * To support TLB batched flush for multiple pages unmapping, we only send
  * the TLBI for each page in arch_tlbbatch_add_pending() and wait for the
@@ -396,33 +419,35 @@ static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
 #define __flush_tlb_range_op(op, start, pages, stride,			\
 				asid, tlb_level, tlbi_user, lpa2)	\
 do {									\
+	typeof(start) __flush_start = start;				\
+	typeof(pages) __flush_pages = pages;				\
 	int num = 0;							\
 	int scale = 3;							\
 	int shift = lpa2 ? 16 : PAGE_SHIFT;				\
 	unsigned long addr;						\
 									\
-	while (pages > 0) {						\
+	while (__flush_pages > 0) {					\
 		if (!system_supports_tlb_range() ||			\
-		    pages == 1 ||					\
-		    (lpa2 && start != ALIGN(start, SZ_64K))) {		\
-			addr = __TLBI_VADDR(start, asid);		\
+		    __flush_pages == 1 ||				\
+		    (lpa2 && __flush_start != ALIGN(__flush_start, SZ_64K))) {	\
+			addr = __TLBI_VADDR(__flush_start, asid);	\
 			__tlbi_level(op, addr, tlb_level);		\
 			if (tlbi_user)					\
 				__tlbi_user_level(op, addr, tlb_level);	\
-			start += stride;				\
-			pages -= stride >> PAGE_SHIFT;			\
+			__flush_start += stride;			\
+			__flush_pages -= stride >> PAGE_SHIFT;		\
 			continue;					\
 		}							\
 									\
-		num = __TLBI_RANGE_NUM(pages, scale);			\
+		num = __TLBI_RANGE_NUM(__flush_pages, scale);		\
 		if (num >= 0) {						\
-			addr = __TLBI_VADDR_RANGE(start >> shift, asid, \
+			addr = __TLBI_VADDR_RANGE(__flush_start >> shift, asid, \
 						scale, num, tlb_level);	\
 			__tlbi(r##op, addr);				\
 			if (tlbi_user)					\
 				__tlbi_user(r##op, addr);		\
-			start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
-			pages -= __TLBI_RANGE_PAGES(num, scale);	\
+			__flush_start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
+			__flush_pages -= __TLBI_RANGE_PAGES(num, scale);\
 		}							\
 		scale--;						\
 	}								\
@@ -448,7 +473,7 @@ static inline bool __flush_tlb_range_limit_excess(unsigned long start,
 	return false;
 }
 
-static inline void __flush_tlb_range_nosync(struct vm_area_struct *vma,
+static inline void __flush_tlb_range_nosync(struct mm_struct *mm,
 				     unsigned long start, unsigned long end,
 				     unsigned long stride, bool last_level,
 				     int tlb_level)
@@ -460,12 +485,12 @@ static inline void __flush_tlb_range_nosync(struct vm_area_struct *vma,
 	pages = (end - start) >> PAGE_SHIFT;
 
 	if (__flush_tlb_range_limit_excess(start, end, pages, stride)) {
-		flush_tlb_mm(vma->vm_mm);
+		flush_tlb_mm(mm);
 		return;
 	}
 
 	dsb(ishst);
-	asid = ASID(vma->vm_mm);
+	asid = ASID(mm);
 
 	if (last_level)
 		__flush_tlb_range_op(vale1is, start, pages, stride, asid,
@@ -474,7 +499,7 @@ static inline void __flush_tlb_range_nosync(struct vm_area_struct *vma,
 		__flush_tlb_range_op(vae1is, start, pages, stride, asid,
 				     tlb_level, true, lpa2_is_enabled());
 
-	mmu_notifier_arch_invalidate_secondary_tlbs(vma->vm_mm, start, end);
+	mmu_notifier_arch_invalidate_secondary_tlbs(mm, start, end);
 }
 
 static inline void __flush_tlb_range(struct vm_area_struct *vma,
@@ -482,11 +507,27 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma,
 				     unsigned long stride, bool last_level,
 				     int tlb_level)
 {
-	__flush_tlb_range_nosync(vma, start, end, stride,
+	__flush_tlb_range_nosync(vma->vm_mm, start, end, stride,
 				 last_level, tlb_level);
 	dsb(ish);
 }
 
+static inline void local_flush_tlb_contpte(struct vm_area_struct *vma,
+					   unsigned long addr)
+{
+	unsigned long asid;
+
+	addr = round_down(addr, CONT_PTE_SIZE);
+
+	dsb(nshst);
+	asid = ASID(vma->vm_mm);
+	__flush_tlb_range_op(vale1, addr, CONT_PTES, PAGE_SIZE, asid,
+			     3, true, lpa2_is_enabled());
+	mmu_notifier_arch_invalidate_secondary_tlbs(vma->vm_mm, addr,
+						    addr + CONT_PTE_SIZE);
+	dsb(nsh);
+}
+
 static inline void flush_tlb_range(struct vm_area_struct *vma,
 				   unsigned long start, unsigned long end)
 {
@@ -533,6 +574,39 @@ static inline void __flush_tlb_kernel_pgtable(unsigned long kaddr)
 	dsb(ish);
 	isb();
 }
+
+static inline void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch,
+		struct mm_struct *mm, unsigned long start, unsigned long end)
+{
+	__flush_tlb_range_nosync(mm, start, end, PAGE_SIZE, true, 3);
+}
+
+static inline bool __pte_flags_need_flush(ptdesc_t oldval, ptdesc_t newval)
+{
+	ptdesc_t diff = oldval ^ newval;
+
+	/* invalid to valid transition requires no flush */
+	if (!(oldval & PTE_VALID))
+		return false;
+
+	/* Transition in the SW bits requires no flush */
+	diff &= ~PTE_SWBITS_MASK;
+
+	return diff;
+}
+
+static inline bool pte_needs_flush(pte_t oldpte, pte_t newpte)
+{
+	return __pte_flags_need_flush(pte_val(oldpte), pte_val(newpte));
+}
+#define pte_needs_flush pte_needs_flush
+
+static inline bool huge_pmd_needs_flush(pmd_t oldpmd, pmd_t newpmd)
+{
+	return __pte_flags_need_flush(pmd_val(oldpmd), pmd_val(newpmd));
+}
+#define huge_pmd_needs_flush huge_pmd_needs_flush
+
 #endif
 
 #endif
diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h
index 341174bf9106..b9eaf4ad7085 100644
--- a/arch/arm64/include/asm/topology.h
+++ b/arch/arm64/include/asm/topology.h
@@ -36,6 +36,9 @@ void update_freq_counters_refs(void);
 #define arch_scale_hw_pressure topology_get_hw_pressure
 #define arch_update_hw_pressure	topology_update_hw_pressure
 
+#undef arch_cpu_is_threaded
+#define arch_cpu_is_threaded() (read_cpuid_mpidr() & MPIDR_MT_BITMASK)
+
 #include <asm-generic/topology.h>
 
 #endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
index d780d1bd2eac..e92e4a0e48fc 100644
--- a/arch/arm64/include/asm/traps.h
+++ b/arch/arm64/include/asm/traps.h
@@ -29,7 +29,14 @@ void arm64_force_sig_fault_pkey(unsigned long far, const char *str, int pkey);
 void arm64_force_sig_mceerr(int code, unsigned long far, short lsb, const char *str);
 void arm64_force_sig_ptrace_errno_trap(int errno, unsigned long far, const char *str);
 
+int bug_brk_handler(struct pt_regs *regs, unsigned long esr);
+int cfi_brk_handler(struct pt_regs *regs, unsigned long esr);
+int reserved_fault_brk_handler(struct pt_regs *regs, unsigned long esr);
+int kasan_brk_handler(struct pt_regs *regs, unsigned long esr);
+int ubsan_brk_handler(struct pt_regs *regs, unsigned long esr);
+
 int early_brk64(unsigned long addr, unsigned long esr, struct pt_regs *regs);
+void dump_kernel_instr(unsigned long kaddr);
 
 /*
  * Move regs->pc to next instruction and do necessary setup before it
@@ -109,10 +116,9 @@ static inline void arm64_mops_reset_regs(struct user_pt_regs *regs, unsigned lon
 	int dstreg = ESR_ELx_MOPS_ISS_DESTREG(esr);
 	int srcreg = ESR_ELx_MOPS_ISS_SRCREG(esr);
 	int sizereg = ESR_ELx_MOPS_ISS_SIZEREG(esr);
-	unsigned long dst, src, size;
+	unsigned long dst, size;
 
 	dst = regs->regs[dstreg];
-	src = regs->regs[srcreg];
 	size = regs->regs[sizereg];
 
 	/*
@@ -129,6 +135,7 @@ static inline void arm64_mops_reset_regs(struct user_pt_regs *regs, unsigned lon
 		}
 	} else {
 		/* CPY* instruction */
+		unsigned long src = regs->regs[srcreg];
 		if (!(option_a ^ wrong_option)) {
 			/* Format is from Option B */
 			if (regs->pstate & PSR_N_BIT) {
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 5b91803201ef..6490930deef8 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -422,9 +422,9 @@ static __must_check __always_inline bool user_access_begin(const void __user *pt
 }
 #define user_access_begin(a,b)	user_access_begin(a,b)
 #define user_access_end()	uaccess_ttbr0_disable()
-#define unsafe_put_user(x, ptr, label) \
+#define arch_unsafe_put_user(x, ptr, label) \
 	__raw_put_mem("sttr", x, uaccess_mask_ptr(ptr), label, U)
-#define unsafe_get_user(x, ptr, label) \
+#define arch_unsafe_get_user(x, ptr, label) \
 	__raw_get_mem("ldtr", x, uaccess_mask_ptr(ptr), label, U)
 
 /*
@@ -502,44 +502,4 @@ static inline size_t probe_subpage_writeable(const char __user *uaddr,
 
 #endif /* CONFIG_ARCH_HAS_SUBPAGE_FAULTS */
 
-#ifdef CONFIG_ARM64_GCS
-
-static inline int gcssttr(unsigned long __user *addr, unsigned long val)
-{
-	register unsigned long __user *_addr __asm__ ("x0") = addr;
-	register unsigned long _val __asm__ ("x1") = val;
-	int err = 0;
-
-	/* GCSSTTR x1, x0 */
-	asm volatile(
-		"1: .inst 0xd91f1c01\n"
-		"2: \n"
-		_ASM_EXTABLE_UACCESS_ERR(1b, 2b, %w0)
-		: "+r" (err)
-		: "rZ" (_val), "r" (_addr)
-		: "memory");
-
-	return err;
-}
-
-static inline void put_user_gcs(unsigned long val, unsigned long __user *addr,
-				int *err)
-{
-	int ret;
-
-	if (!access_ok((char __user *)addr, sizeof(u64))) {
-		*err = -EFAULT;
-		return;
-	}
-
-	uaccess_ttbr0_enable();
-	ret = gcssttr(addr, val);
-	if (ret != 0)
-		*err = ret;
-	uaccess_ttbr0_disable();
-}
-
-
-#endif /* CONFIG_ARM64_GCS */
-
 #endif /* __ASM_UACCESS_H */
diff --git a/arch/arm64/include/asm/uprobes.h b/arch/arm64/include/asm/uprobes.h
index 014b02897f8e..89bfb0213a50 100644
--- a/arch/arm64/include/asm/uprobes.h
+++ b/arch/arm64/include/asm/uprobes.h
@@ -28,4 +28,15 @@ struct arch_uprobe {
 	bool simulate;
 };
 
+int uprobe_brk_handler(struct pt_regs *regs, unsigned long esr);
+#ifdef CONFIG_UPROBES
+int uprobe_single_step_handler(struct pt_regs *regs, unsigned long esr);
+#else
+static inline int uprobe_single_step_handler(struct pt_regs *regs,
+	unsigned long esr)
+{
+	return DBG_HOOK_ERROR;
+}
+#endif
+
 #endif
diff --git a/arch/arm64/include/asm/vdso.h b/arch/arm64/include/asm/vdso.h
index 3e3c3fdb1842..232b46969088 100644
--- a/arch/arm64/include/asm/vdso.h
+++ b/arch/arm64/include/asm/vdso.h
@@ -5,9 +5,9 @@
 #ifndef __ASM_VDSO_H
 #define __ASM_VDSO_H
 
-#define __VVAR_PAGES    2
+#define __VDSO_PAGES    4
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <generated/vdso-offsets.h>
 
@@ -19,6 +19,6 @@
 extern char vdso_start[], vdso_end[];
 extern char vdso32_start[], vdso32_end[];
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_H */
diff --git a/arch/arm64/include/asm/vdso/compat_barrier.h b/arch/arm64/include/asm/vdso/compat_barrier.h
index 3ac35f4a667c..d7ebe7ceefa0 100644
--- a/arch/arm64/include/asm/vdso/compat_barrier.h
+++ b/arch/arm64/include/asm/vdso/compat_barrier.h
@@ -5,13 +5,12 @@
 #ifndef __COMPAT_BARRIER_H
 #define __COMPAT_BARRIER_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
- * Warning: This code is meant to be used with
- * ENABLE_COMPAT_VDSO only.
+ * Warning: This code is meant to be used from the compat vDSO only.
  */
-#ifndef ENABLE_COMPAT_VDSO
-#error This header is meant to be used with ENABLE_COMPAT_VDSO only
+#ifdef __arch64__
+#error This header is meant to be used with from the compat vDSO only
 #endif
 
 #ifdef dmb
@@ -32,6 +31,6 @@
 #define smp_rmb()	aarch32_smp_rmb()
 #define smp_wmb()	aarch32_smp_wmb()
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __COMPAT_BARRIER_H */
diff --git a/arch/arm64/include/asm/vdso/compat_gettimeofday.h b/arch/arm64/include/asm/vdso/compat_gettimeofday.h
index 778c1202bbbf..0d513f924321 100644
--- a/arch/arm64/include/asm/vdso/compat_gettimeofday.h
+++ b/arch/arm64/include/asm/vdso/compat_gettimeofday.h
@@ -2,10 +2,10 @@
 /*
  * Copyright (C) 2018 ARM Limited
  */
-#ifndef __ASM_VDSO_GETTIMEOFDAY_H
-#define __ASM_VDSO_GETTIMEOFDAY_H
+#ifndef __ASM_VDSO_COMPAT_GETTIMEOFDAY_H
+#define __ASM_VDSO_COMPAT_GETTIMEOFDAY_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/barrier.h>
 #include <asm/unistd_compat_32.h>
@@ -104,7 +104,7 @@ int clock_getres32_fallback(clockid_t _clkid, struct old_timespec32 *_ts)
 }
 
 static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
-						 const struct vdso_data *vd)
+						 const struct vdso_time_data *vd)
 {
 	u64 res;
 
@@ -131,48 +131,36 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
 	return res;
 }
 
-static __always_inline const struct vdso_data *__arch_get_vdso_data(void)
+static __always_inline const struct vdso_time_data *__arch_get_vdso_u_time_data(void)
 {
-	const struct vdso_data *ret;
+	const struct vdso_time_data *ret;
 
 	/*
-	 * This simply puts &_vdso_data into ret. The reason why we don't use
-	 * `ret = _vdso_data` is that the compiler tends to optimise this in a
-	 * very suboptimal way: instead of keeping &_vdso_data in a register,
-	 * it goes through a relocation almost every time _vdso_data must be
+	 * This simply puts &_vdso_time_data into ret. The reason why we don't use
+	 * `ret = _vdso_time_data` is that the compiler tends to optimise this in a
+	 * very suboptimal way: instead of keeping &_vdso_time_data in a register,
+	 * it goes through a relocation almost every time _vdso_time_data must be
 	 * accessed (even in subfunctions). This is both time and space
 	 * consuming: each relocation uses a word in the code section, and it
 	 * has to be loaded at runtime.
 	 *
 	 * This trick hides the assignment from the compiler. Since it cannot
 	 * track where the pointer comes from, it will only use one relocation
-	 * where __arch_get_vdso_data() is called, and then keep the result in
-	 * a register.
+	 * where __aarch64_get_vdso_u_time_data() is called, and then keep the
+	 * result in a register.
 	 */
-	asm volatile("mov %0, %1" : "=r"(ret) : "r"(_vdso_data));
+	asm volatile("mov %0, %1" : "=r"(ret) : "r"(&vdso_u_time_data));
 
 	return ret;
 }
+#define __arch_get_vdso_u_time_data __arch_get_vdso_u_time_data
 
-#ifdef CONFIG_TIME_NS
-static __always_inline
-const struct vdso_data *__arch_get_timens_vdso_data(const struct vdso_data *vd)
-{
-	const struct vdso_data *ret;
-
-	/* See __arch_get_vdso_data(). */
-	asm volatile("mov %0, %1" : "=r"(ret) : "r"(_timens_data));
-
-	return ret;
-}
-#endif
-
-static inline bool vdso_clocksource_ok(const struct vdso_data *vd)
+static inline bool vdso_clocksource_ok(const struct vdso_clock *vc)
 {
-	return vd->clock_mode == VDSO_CLOCKMODE_ARCHTIMER;
+	return vc->clock_mode == VDSO_CLOCKMODE_ARCHTIMER;
 }
 #define vdso_clocksource_ok	vdso_clocksource_ok
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
-#endif /* __ASM_VDSO_GETTIMEOFDAY_H */
+#endif /* __ASM_VDSO_COMPAT_GETTIMEOFDAY_H */
diff --git a/arch/arm64/include/asm/vdso/getrandom.h b/arch/arm64/include/asm/vdso/getrandom.h
index 342f807e2044..da1d58bbfabe 100644
--- a/arch/arm64/include/asm/vdso/getrandom.h
+++ b/arch/arm64/include/asm/vdso/getrandom.h
@@ -3,7 +3,7 @@
 #ifndef __ASM_VDSO_GETRANDOM_H
 #define __ASM_VDSO_GETRANDOM_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/unistd.h>
 #include <asm/vdso/vsyscall.h>
@@ -33,18 +33,6 @@ static __always_inline ssize_t getrandom_syscall(void *_buffer, size_t _len, uns
 	return ret;
 }
 
-static __always_inline const struct vdso_rng_data *__arch_get_vdso_rng_data(void)
-{
-	/*
-	 * The RNG data is in the real VVAR data page, but if a task belongs to a time namespace
-	 * then VVAR_DATA_PAGE_OFFSET points to the namespace-specific VVAR page and VVAR_TIMENS_
-	 * PAGE_OFFSET points to the real VVAR page.
-	 */
-	if (IS_ENABLED(CONFIG_TIME_NS) && _vdso_data->clock_mode == VDSO_CLOCKMODE_TIMENS)
-		return (void *)&_vdso_rng_data + VVAR_TIMENS_PAGE_OFFSET * (1UL << CONFIG_PAGE_SHIFT);
-	return &_vdso_rng_data;
-}
-
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_GETRANDOM_H */
diff --git a/arch/arm64/include/asm/vdso/gettimeofday.h b/arch/arm64/include/asm/vdso/gettimeofday.h
index 764d13e2916c..3658a757e255 100644
--- a/arch/arm64/include/asm/vdso/gettimeofday.h
+++ b/arch/arm64/include/asm/vdso/gettimeofday.h
@@ -5,9 +5,12 @@
 #ifndef __ASM_VDSO_GETTIMEOFDAY_H
 #define __ASM_VDSO_GETTIMEOFDAY_H
 
-#ifndef __ASSEMBLY__
+#ifdef __aarch64__
+
+#ifndef __ASSEMBLER__
 
 #include <asm/alternative.h>
+#include <asm/arch_timer.h>
 #include <asm/barrier.h>
 #include <asm/unistd.h>
 #include <asm/sysreg.h>
@@ -67,10 +70,8 @@ int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
 }
 
 static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
-						 const struct vdso_data *vd)
+						 const struct vdso_time_data *vd)
 {
-	u64 res;
-
 	/*
 	 * Core checks for mode already, so this raced against a concurrent
 	 * update. Return something. Core will do another round and then
@@ -79,40 +80,28 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
 	if (clock_mode == VDSO_CLOCKMODE_NONE)
 		return 0;
 
-	/*
-	 * If FEAT_ECV is available, use the self-synchronizing counter.
-	 * Otherwise the isb is required to prevent that the counter value
-	 * is speculated.
-	*/
-	asm volatile(
-	ALTERNATIVE("isb\n"
-		    "mrs %0, cntvct_el0",
-		    "nop\n"
-		    __mrs_s("%0", SYS_CNTVCTSS_EL0),
-		    ARM64_HAS_ECV)
-	: "=r" (res)
-	:
-	: "memory");
-
-	arch_counter_enforce_ordering(res);
-
-	return res;
+	return __arch_counter_get_cntvct();
 }
 
-static __always_inline
-const struct vdso_data *__arch_get_vdso_data(void)
+#if IS_ENABLED(CONFIG_CC_IS_GCC) && IS_ENABLED(CONFIG_PAGE_SIZE_64KB)
+static __always_inline const struct vdso_time_data *__arch_get_vdso_u_time_data(void)
 {
-	return _vdso_data;
-}
+	const struct vdso_time_data *ret = &vdso_u_time_data;
 
-#ifdef CONFIG_TIME_NS
-static __always_inline
-const struct vdso_data *__arch_get_timens_vdso_data(const struct vdso_data *vd)
-{
-	return _timens_data;
+	/* Work around invalid absolute relocations */
+	OPTIMIZER_HIDE_VAR(ret);
+
+	return ret;
 }
-#endif
+#define __arch_get_vdso_u_time_data __arch_get_vdso_u_time_data
+#endif /* IS_ENABLED(CONFIG_CC_IS_GCC) && IS_ENABLED(CONFIG_PAGE_SIZE_64KB) */
+
+#endif /* !__ASSEMBLER__ */
+
+#else /* !__aarch64__ */
+
+#include "compat_gettimeofday.h"
 
-#endif /* !__ASSEMBLY__ */
+#endif /* __aarch64__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/arm64/include/asm/vdso/processor.h b/arch/arm64/include/asm/vdso/processor.h
index ff830b766ad2..7abb0cc81cd6 100644
--- a/arch/arm64/include/asm/vdso/processor.h
+++ b/arch/arm64/include/asm/vdso/processor.h
@@ -5,13 +5,13 @@
 #ifndef __ASM_VDSO_PROCESSOR_H
 #define __ASM_VDSO_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline void cpu_relax(void)
 {
 	asm volatile("yield" ::: "memory");
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_PROCESSOR_H */
diff --git a/arch/arm64/include/asm/vdso/vsyscall.h b/arch/arm64/include/asm/vdso/vsyscall.h
index eea51946d45a..3f3c8eb74e2e 100644
--- a/arch/arm64/include/asm/vdso/vsyscall.h
+++ b/arch/arm64/include/asm/vdso/vsyscall.h
@@ -2,50 +2,26 @@
 #ifndef __ASM_VDSO_VSYSCALL_H
 #define __ASM_VDSO_VSYSCALL_H
 
-#define __VDSO_RND_DATA_OFFSET  480
-
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <vdso/datapage.h>
 
-enum vvar_pages {
-	VVAR_DATA_PAGE_OFFSET,
-	VVAR_TIMENS_PAGE_OFFSET,
-	VVAR_NR_PAGES,
-};
-
 #define VDSO_PRECISION_MASK	~(0xFF00ULL<<48)
 
-extern struct vdso_data *vdso_data;
 
 /*
  * Update the vDSO data page to keep in sync with kernel timekeeping.
  */
 static __always_inline
-struct vdso_data *__arm64_get_k_vdso_data(void)
-{
-	return vdso_data;
-}
-#define __arch_get_k_vdso_data __arm64_get_k_vdso_data
-
-static __always_inline
-struct vdso_rng_data *__arm64_get_k_vdso_rnd_data(void)
-{
-	return (void *)vdso_data + __VDSO_RND_DATA_OFFSET;
-}
-#define __arch_get_k_vdso_rng_data __arm64_get_k_vdso_rnd_data
-
-static __always_inline
-void __arm64_update_vsyscall(struct vdso_data *vdata)
+void __arch_update_vdso_clock(struct vdso_clock *vc)
 {
-	vdata[CS_HRES_COARSE].mask	= VDSO_PRECISION_MASK;
-	vdata[CS_RAW].mask		= VDSO_PRECISION_MASK;
+	vc->mask	= VDSO_PRECISION_MASK;
 }
-#define __arch_update_vsyscall __arm64_update_vsyscall
+#define __arch_update_vdso_clock __arch_update_vdso_clock
 
 /* The asm-generic header needs to be included after the definitions above */
 #include <asm-generic/vdso/vsyscall.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_VSYSCALL_H */
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index ebf4a9f943ed..b51ab6840f9c 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -40,8 +40,13 @@
  */
 #define HVC_FINALISE_EL2	3
 
+/*
+ * HVC_GET_ICH_VTR_EL2 - Retrieve the ICH_VTR_EL2 value
+ */
+#define HVC_GET_ICH_VTR_EL2	4
+
 /* Max number of HYP stub hypercalls */
-#define HVC_STUB_HCALL_NR 4
+#define HVC_STUB_HCALL_NR 5
 
 /* Error returned when an invalid stub number is passed into x0 */
 #define HVC_STUB_ERR	0xbadca11
@@ -56,7 +61,7 @@
  */
 #define BOOT_CPU_FLAG_E2H	BIT_ULL(32)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
 #include <asm/sections.h>
@@ -67,7 +72,8 @@
  * __boot_cpu_mode records what mode CPUs were booted in.
  * A correctly-implemented bootloader must start all CPUs in the same mode:
  * In this case, both 32bit halves of __boot_cpu_mode will contain the
- * same value (either 0 if booted in EL1, BOOT_CPU_MODE_EL2 if booted in EL2).
+ * same value (either BOOT_CPU_MODE_EL1 if booted in EL1, BOOT_CPU_MODE_EL2 if
+ * booted in EL2).
  *
  * Should the bootloader fail to do this, the two values will be different.
  * This allows the kernel to flag an error when the secondaries have come up.
@@ -160,6 +166,6 @@ static inline bool is_hyp_nvhe(void)
 	return is_hyp_mode_available() && !is_kernel_in_hyp_mode();
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* ! __ASM__VIRT_H */
diff --git a/arch/arm64/include/asm/vmalloc.h b/arch/arm64/include/asm/vmalloc.h
index 38fafffe699f..4ec1acd3c1b3 100644
--- a/arch/arm64/include/asm/vmalloc.h
+++ b/arch/arm64/include/asm/vmalloc.h
@@ -9,18 +9,58 @@
 #define arch_vmap_pud_supported arch_vmap_pud_supported
 static inline bool arch_vmap_pud_supported(pgprot_t prot)
 {
-	/*
-	 * SW table walks can't handle removal of intermediate entries.
-	 */
-	return pud_sect_supported() &&
-	       !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
+	return pud_sect_supported();
 }
 
 #define arch_vmap_pmd_supported arch_vmap_pmd_supported
 static inline bool arch_vmap_pmd_supported(pgprot_t prot)
 {
-	/* See arch_vmap_pud_supported() */
-	return !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
+	return true;
+}
+
+#define arch_vmap_pte_range_map_size arch_vmap_pte_range_map_size
+static inline unsigned long arch_vmap_pte_range_map_size(unsigned long addr,
+						unsigned long end, u64 pfn,
+						unsigned int max_page_shift)
+{
+	/*
+	 * If the block is at least CONT_PTE_SIZE in size, and is naturally
+	 * aligned in both virtual and physical space, then we can pte-map the
+	 * block using the PTE_CONT bit for more efficient use of the TLB.
+	 */
+	if (max_page_shift < CONT_PTE_SHIFT)
+		return PAGE_SIZE;
+
+	if (end - addr < CONT_PTE_SIZE)
+		return PAGE_SIZE;
+
+	if (!IS_ALIGNED(addr, CONT_PTE_SIZE))
+		return PAGE_SIZE;
+
+	if (!IS_ALIGNED(PFN_PHYS(pfn), CONT_PTE_SIZE))
+		return PAGE_SIZE;
+
+	return CONT_PTE_SIZE;
+}
+
+#define arch_vmap_pte_range_unmap_size arch_vmap_pte_range_unmap_size
+static inline unsigned long arch_vmap_pte_range_unmap_size(unsigned long addr,
+							   pte_t *ptep)
+{
+	/*
+	 * The caller handles alignment so it's sufficient just to check
+	 * PTE_CONT.
+	 */
+	return pte_valid_cont(__ptep_get(ptep)) ? CONT_PTE_SIZE : PAGE_SIZE;
+}
+
+#define arch_vmap_pte_supported_shift arch_vmap_pte_supported_shift
+static inline int arch_vmap_pte_supported_shift(unsigned long size)
+{
+	if (size >= CONT_PTE_SIZE)
+		return CONT_PTE_SHIFT;
+
+	return PAGE_SHIFT;
 }
 
 #endif
diff --git a/arch/arm64/include/asm/vmap_stack.h b/arch/arm64/include/asm/vmap_stack.h
index 20873099c035..75daee1a07e9 100644
--- a/arch/arm64/include/asm/vmap_stack.h
+++ b/arch/arm64/include/asm/vmap_stack.h
@@ -3,9 +3,7 @@
 #ifndef __ASM_VMAP_STACK_H
 #define __ASM_VMAP_STACK_H
 
-#include <linux/bug.h>
 #include <linux/gfp.h>
-#include <linux/kconfig.h>
 #include <linux/vmalloc.h>
 #include <linux/pgtable.h>
 #include <asm/memory.h>
@@ -19,8 +17,6 @@ static inline unsigned long *arch_alloc_vmap_stack(size_t stack_size, int node)
 {
 	void *p;
 
-	BUILD_BUG_ON(!IS_ENABLED(CONFIG_VMAP_STACK));
-
 	p = __vmalloc_node(stack_size, THREAD_ALIGN, THREADINFO_GFP, node,
 			__builtin_return_address(0));
 	return kasan_reset_tag(p);
diff --git a/arch/arm64/include/asm/vncr_mapping.h b/arch/arm64/include/asm/vncr_mapping.h
index 4f9bbd4d6c26..c2485a862e69 100644
--- a/arch/arm64/include/asm/vncr_mapping.h
+++ b/arch/arm64/include/asm/vncr_mapping.h
@@ -35,6 +35,8 @@
 #define VNCR_CNTP_CTL_EL0       0x180
 #define VNCR_SCXTNUM_EL1        0x188
 #define VNCR_TFSR_EL1		0x190
+#define VNCR_HDFGRTR2_EL2	0x1A0
+#define VNCR_HDFGWTR2_EL2	0x1B0
 #define VNCR_HFGRTR_EL2		0x1B8
 #define VNCR_HFGWTR_EL2		0x1C0
 #define VNCR_HFGITR_EL2		0x1C8
@@ -49,9 +51,13 @@
 #define VNCR_SP_EL1             0x240
 #define VNCR_VBAR_EL1           0x250
 #define VNCR_TCR2_EL1		0x270
+#define VNCR_SCTLR2_EL1		0x278
 #define VNCR_PIRE0_EL1		0x290
 #define VNCR_PIR_EL1		0x2A0
 #define VNCR_POR_EL1		0x2A8
+#define VNCR_HFGRTR2_EL2	0x2C0
+#define VNCR_HFGWTR2_EL2	0x2C8
+#define VNCR_HFGITR2_EL2	0x310
 #define VNCR_ICH_LR0_EL2        0x400
 #define VNCR_ICH_LR1_EL2        0x408
 #define VNCR_ICH_LR2_EL2        0x410
@@ -79,6 +85,7 @@
 #define VNCR_ICH_HCR_EL2        0x4C0
 #define VNCR_ICH_VMCR_EL2       0x4C8
 #define VNCR_VDISR_EL2          0x500
+#define VNCR_VSESR_EL2		0x508
 #define VNCR_PMBLIMITR_EL1      0x800
 #define VNCR_PMBPTR_EL1         0x810
 #define VNCR_PMBSR_EL1          0x820
@@ -87,6 +94,8 @@
 #define VNCR_PMSICR_EL1         0x838
 #define VNCR_PMSIRR_EL1         0x840
 #define VNCR_PMSLATFR_EL1       0x848
+#define VNCR_PMSNEVFR_EL1       0x850
+#define VNCR_PMSDSFR_EL1        0x858
 #define VNCR_TRFCR_EL1          0x880
 #define VNCR_MPAM1_EL1          0x900
 #define VNCR_MPAMHCR_EL2        0x930
diff --git a/arch/arm64/include/asm/xen/events.h b/arch/arm64/include/asm/xen/events.h
index 2788e95d0ff0..2977b5fe068d 100644
--- a/arch/arm64/include/asm/xen/events.h
+++ b/arch/arm64/include/asm/xen/events.h
@@ -14,7 +14,7 @@ enum ipi_vector {
 
 static inline int xen_irqs_disabled(struct pt_regs *regs)
 {
-	return !interrupts_enabled(regs);
+	return regs_irqs_disabled(regs);
 }
 
 #define xchg_xen_ulong(ptr, val) xchg((ptr), (val))
diff --git a/arch/arm64/include/asm/xor.h b/arch/arm64/include/asm/xor.h
index befcd8a7abc9..c38e3d017a79 100644
--- a/arch/arm64/include/asm/xor.h
+++ b/arch/arm64/include/asm/xor.h
@@ -9,7 +9,7 @@
 #include <linux/hardirq.h>
 #include <asm-generic/xor.h>
 #include <asm/hwcap.h>
-#include <asm/neon.h>
+#include <asm/simd.h>
 
 #ifdef CONFIG_KERNEL_MODE_NEON
 
@@ -19,9 +19,8 @@ static void
 xor_neon_2(unsigned long bytes, unsigned long * __restrict p1,
 	   const unsigned long * __restrict p2)
 {
-	kernel_neon_begin();
-	xor_block_inner_neon.do_2(bytes, p1, p2);
-	kernel_neon_end();
+	scoped_ksimd()
+		xor_block_inner_neon.do_2(bytes, p1, p2);
 }
 
 static void
@@ -29,9 +28,8 @@ xor_neon_3(unsigned long bytes, unsigned long * __restrict p1,
 	   const unsigned long * __restrict p2,
 	   const unsigned long * __restrict p3)
 {
-	kernel_neon_begin();
-	xor_block_inner_neon.do_3(bytes, p1, p2, p3);
-	kernel_neon_end();
+	scoped_ksimd()
+		xor_block_inner_neon.do_3(bytes, p1, p2, p3);
 }
 
 static void
@@ -40,9 +38,8 @@ xor_neon_4(unsigned long bytes, unsigned long * __restrict p1,
 	   const unsigned long * __restrict p3,
 	   const unsigned long * __restrict p4)
 {
-	kernel_neon_begin();
-	xor_block_inner_neon.do_4(bytes, p1, p2, p3, p4);
-	kernel_neon_end();
+	scoped_ksimd()
+		xor_block_inner_neon.do_4(bytes, p1, p2, p3, p4);
 }
 
 static void
@@ -52,9 +49,8 @@ xor_neon_5(unsigned long bytes, unsigned long * __restrict p1,
 	   const unsigned long * __restrict p4,
 	   const unsigned long * __restrict p5)
 {
-	kernel_neon_begin();
-	xor_block_inner_neon.do_5(bytes, p1, p2, p3, p4, p5);
-	kernel_neon_end();
+	scoped_ksimd()
+		xor_block_inner_neon.do_5(bytes, p1, p2, p3, p4, p5);
 }
 
 static struct xor_block_template xor_block_arm64 = {
diff --git a/arch/arm64/include/uapi/asm/bitsperlong.h b/arch/arm64/include/uapi/asm/bitsperlong.h
index 485d60bee26c..d59730975f30 100644
--- a/arch/arm64/include/uapi/asm/bitsperlong.h
+++ b/arch/arm64/include/uapi/asm/bitsperlong.h
@@ -17,7 +17,12 @@
 #ifndef __ASM_BITSPERLONG_H
 #define __ASM_BITSPERLONG_H
 
+#if defined(__KERNEL__) && !defined(__aarch64__)
+/* Used by the compat vDSO */
+#define __BITS_PER_LONG 32
+#else
 #define __BITS_PER_LONG 64
+#endif
 
 #include <asm-generic/bitsperlong.h>
 
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index 48d46b768eae..575564ecdb0b 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -56,6 +56,21 @@
 #define HWCAP_PACA		(1 << 30)
 #define HWCAP_PACG		(1UL << 31)
 #define HWCAP_GCS		(1UL << 32)
+#define HWCAP_CMPBR		(1UL << 33)
+#define HWCAP_FPRCVT		(1UL << 34)
+#define HWCAP_F8MM8		(1UL << 35)
+#define HWCAP_F8MM4		(1UL << 36)
+#define HWCAP_SVE_F16MM		(1UL << 37)
+#define HWCAP_SVE_ELTPERM	(1UL << 38)
+#define HWCAP_SVE_AES2		(1UL << 39)
+#define HWCAP_SVE_BFSCALE	(1UL << 40)
+#define HWCAP_SVE2P2		(1UL << 41)
+#define HWCAP_SME2P2		(1UL << 42)
+#define HWCAP_SME_SBITPERM	(1UL << 43)
+#define HWCAP_SME_AES		(1UL << 44)
+#define HWCAP_SME_SFEXPA	(1UL << 45)
+#define HWCAP_SME_STMOP		(1UL << 46)
+#define HWCAP_SME_SMOP4		(1UL << 47)
 
 /*
  * HWCAP2 flags - for AT_HWCAP2
@@ -128,5 +143,8 @@
 /*
  * HWCAP3 flags - for AT_HWCAP3
  */
+#define HWCAP3_MTE_FAR		(1UL << 0)
+#define HWCAP3_MTE_STORE_ONLY		(1UL << 1)
+#define HWCAP3_LSFE		(1UL << 2)
 
 #endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index 66736ff04011..a792a599b9d6 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -31,7 +31,7 @@
 #define KVM_SPSR_FIQ	4
 #define KVM_NR_SPSR	5
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/psci.h>
 #include <linux/types.h>
 #include <asm/ptrace.h>
@@ -43,9 +43,6 @@
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
 #define KVM_DIRTY_LOG_PAGE_OFFSET 64
 
-#define KVM_REG_SIZE(id)						\
-	(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
-
 struct kvm_regs {
 	struct user_pt_regs regs;	/* sp = sp_el0 */
 
@@ -108,6 +105,7 @@ struct kvm_regs {
 #define KVM_ARM_VCPU_PTRAUTH_ADDRESS	5 /* VCPU uses address authentication */
 #define KVM_ARM_VCPU_PTRAUTH_GENERIC	6 /* VCPU uses generic authentication */
 #define KVM_ARM_VCPU_HAS_EL2		7 /* Support nested virtualization */
+#define KVM_ARM_VCPU_HAS_EL2_E2H0	8 /* Limit NV support to E2H RES0 */
 
 struct kvm_vcpu_init {
 	__u32 target;
@@ -374,6 +372,7 @@ enum {
 #endif
 };
 
+/* Vendor hyper call function numbers 0-63 */
 #define KVM_REG_ARM_VENDOR_HYP_BMAP		KVM_REG_ARM_FW_FEAT_BMAP_REG(2)
 
 enum {
@@ -384,6 +383,17 @@ enum {
 #endif
 };
 
+/* Vendor hyper call function numbers 64-127 */
+#define KVM_REG_ARM_VENDOR_HYP_BMAP_2		KVM_REG_ARM_FW_FEAT_BMAP_REG(3)
+
+enum {
+	KVM_REG_ARM_VENDOR_HYP_BIT_DISCOVER_IMPL_VER	= 0,
+	KVM_REG_ARM_VENDOR_HYP_BIT_DISCOVER_IMPL_CPUS	= 1,
+#ifdef __KERNEL__
+	KVM_REG_ARM_VENDOR_HYP_BMAP_2_BIT_COUNT,
+#endif
+};
+
 /* Device Control API on vm fd */
 #define KVM_ARM_VM_SMCCC_CTRL		0
 #define   KVM_ARM_VM_SMCCC_FILTER	0
@@ -406,6 +416,7 @@ enum {
 #define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6
 #define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO  7
 #define KVM_DEV_ARM_VGIC_GRP_ITS_REGS 8
+#define KVM_DEV_ARM_VGIC_GRP_MAINT_IRQ  9
 #define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT	10
 #define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \
 			(0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT)
@@ -420,10 +431,11 @@ enum {
 
 /* Device Control API on vcpu fd */
 #define KVM_ARM_VCPU_PMU_V3_CTRL	0
-#define   KVM_ARM_VCPU_PMU_V3_IRQ	0
-#define   KVM_ARM_VCPU_PMU_V3_INIT	1
-#define   KVM_ARM_VCPU_PMU_V3_FILTER	2
-#define   KVM_ARM_VCPU_PMU_V3_SET_PMU	3
+#define   KVM_ARM_VCPU_PMU_V3_IRQ		0
+#define   KVM_ARM_VCPU_PMU_V3_INIT		1
+#define   KVM_ARM_VCPU_PMU_V3_FILTER		2
+#define   KVM_ARM_VCPU_PMU_V3_SET_PMU		3
+#define   KVM_ARM_VCPU_PMU_V3_SET_NR_COUNTERS	4
 #define KVM_ARM_VCPU_TIMER_CTRL		1
 #define   KVM_ARM_VCPU_TIMER_IRQ_VTIMER		0
 #define   KVM_ARM_VCPU_TIMER_IRQ_PTIMER		1
diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h
index 0f39ba4f3efd..6fed93fb2536 100644
--- a/arch/arm64/include/uapi/asm/ptrace.h
+++ b/arch/arm64/include/uapi/asm/ptrace.h
@@ -80,7 +80,7 @@
 #define PTRACE_PEEKMTETAGS	  33
 #define PTRACE_POKEMTETAGS	  34
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * User structures for general purpose, floating point and debug registers.
@@ -332,6 +332,6 @@ struct user_gcs {
 	__u64 gcspr_el0;
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _UAPI__ASM_PTRACE_H */
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index d42f7a92238b..e29bf3e2d0cc 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -17,7 +17,7 @@
 #ifndef _UAPI__ASM_SIGCONTEXT_H
 #define _UAPI__ASM_SIGCONTEXT_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 
@@ -192,7 +192,7 @@ struct gcs_context {
 	__u64 reserved;
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #include <asm/sve_context.h>
 
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 71c29a2a2f19..76f32e424065 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -34,7 +34,7 @@ obj-y			:= debug-monitors.o entry.o irq.o fpsimd.o		\
 			   cpufeature.o alternative.o cacheinfo.o		\
 			   smp.o smp_spin_table.o topology.o smccc-call.o	\
 			   syscall.o proton-pack.o idle.o patching.o pi/	\
-			   rsi.o
+			   rsi.o jump_label.o
 
 obj-$(CONFIG_COMPAT)			+= sys32.o signal32.o			\
 					   sys_compat.o
@@ -47,7 +47,6 @@ obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o perf_callchain.o
 obj-$(CONFIG_HARDLOCKUP_DETECTOR_PERF)	+= watchdog_hld.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_CPU_PM)			+= sleep.o suspend.o
-obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 obj-$(CONFIG_KGDB)			+= kgdb.o
 obj-$(CONFIG_EFI)			+= efi.o efi-rt-wrapper.o
 obj-$(CONFIG_PCI)			+= pci.o
@@ -78,10 +77,10 @@ $(obj)/vdso32-wrap.o: $(obj)/vdso32/vdso.so
 
 obj-y					+= probes/
 obj-y					+= head.o
-extra-y					+= vmlinux.lds
+always-$(KBUILD_BUILTIN)		+= vmlinux.lds
 
 ifeq ($(CONFIG_DEBUG_EFI),y)
-AFLAGS_head.o += -DVMLINUX_PATH="\"$(realpath $(objtree)/vmlinux)\""
+AFLAGS_head.o += -DVMLINUX_PATH="\"$(abspath vmlinux)\""
 endif
 
 # for cleaning
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index e6f66491fbe9..af90128cfed5 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -133,7 +133,7 @@ static int __init acpi_fadt_sanity_check(void)
 
 	/*
 	 * FADT is required on arm64; retrieve it to check its presence
-	 * and carry out revision and ACPI HW reduced compliancy tests
+	 * and carry out revision and ACPI HW reduced compliance tests
 	 */
 	status = acpi_get_table(ACPI_SIG_FADT, 0, &table);
 	if (ACPI_FAILURE(status)) {
@@ -252,8 +252,6 @@ done:
 		 */
 		acpi_parse_spcr(earlycon_acpi_spcr_enable,
 			!param_acpi_nospcr);
-		pr_info("Use ACPI SPCR as default console: %s\n",
-				param_acpi_nospcr ? "No" : "Yes");
 
 		if (IS_ENABLED(CONFIG_ACPI_BGRT))
 			acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);
@@ -379,7 +377,7 @@ void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
 				prot = __acpi_get_writethrough_mem_attribute();
 		}
 	}
-	return ioremap_prot(phys, size, pgprot_val(prot));
+	return ioremap_prot(phys, size, prot);
 }
 
 /*
@@ -403,7 +401,7 @@ int apei_claim_sea(struct pt_regs *regs)
 	return_to_irqs_enabled = !irqs_disabled_flags(arch_local_save_flags());
 
 	if (regs)
-		return_to_irqs_enabled = interrupts_enabled(regs);
+		return_to_irqs_enabled = !regs_irqs_disabled(regs);
 
 	/*
 	 * SEA can interrupt SError, mask it and describe this as an NMI so
@@ -425,7 +423,7 @@ int apei_claim_sea(struct pt_regs *regs)
 			irq_work_run();
 			__irq_exit();
 		} else {
-			pr_warn_ratelimited("APEI work queued but not completed");
+			pr_warn_ratelimited("APEI work queued but not completed\n");
 			err = -EINPROGRESS;
 		}
 	}
diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c
index 8ff6610af496..f5ec7e7c1d3f 100644
--- a/arch/arm64/kernel/alternative.c
+++ b/arch/arm64/kernel/alternative.c
@@ -139,9 +139,9 @@ static noinstr void clean_dcache_range_nopatch(u64 start, u64 end)
 	} while (cur += d_size, cur < end);
 }
 
-static void __apply_alternatives(const struct alt_region *region,
-				 bool is_module,
-				 unsigned long *cpucap_mask)
+static int __apply_alternatives(const struct alt_region *region,
+				bool is_module,
+				unsigned long *cpucap_mask)
 {
 	struct alt_instr *alt;
 	__le32 *origptr, *updptr;
@@ -166,10 +166,13 @@ static void __apply_alternatives(const struct alt_region *region,
 		updptr = is_module ? origptr : lm_alias(origptr);
 		nr_inst = alt->orig_len / AARCH64_INSN_SIZE;
 
-		if (ALT_HAS_CB(alt))
+		if (ALT_HAS_CB(alt)) {
 			alt_cb  = ALT_REPL_PTR(alt);
-		else
+			if (is_module && !core_kernel_text((unsigned long)alt_cb))
+				return -ENOEXEC;
+		} else {
 			alt_cb = patch_alternative;
+		}
 
 		alt_cb(alt, origptr, updptr, nr_inst);
 
@@ -193,6 +196,8 @@ static void __apply_alternatives(const struct alt_region *region,
 		bitmap_and(applied_alternatives, applied_alternatives,
 			   system_cpucaps, ARM64_NCAPS);
 	}
+
+	return 0;
 }
 
 static void __init apply_alternatives_vdso(void)
@@ -277,7 +282,7 @@ void __init apply_boot_alternatives(void)
 }
 
 #ifdef CONFIG_MODULES
-void apply_alternatives_module(void *start, size_t length)
+int apply_alternatives_module(void *start, size_t length)
 {
 	struct alt_region region = {
 		.begin	= start,
@@ -287,7 +292,7 @@ void apply_alternatives_module(void *start, size_t length)
 
 	bitmap_fill(all_capabilities, ARM64_NCAPS);
 
-	__apply_alternatives(&region, true, &all_capabilities[0]);
+	return __apply_alternatives(&region, true, &all_capabilities[0]);
 }
 #endif
 
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 29bf85dacffe..b6367ff3a49c 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -6,6 +6,7 @@
  *               2001-2002 Keith Owens
  * Copyright (C) 2012 ARM Ltd.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/arm_sdei.h>
 #include <linux/sched.h>
@@ -179,20 +180,10 @@ int main(void)
   DEFINE(FTRACE_OPS_FUNC,		offsetof(struct ftrace_ops, func));
 #endif
   BLANK();
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-  DEFINE(FGRET_REGS_X0,			offsetof(struct fgraph_ret_regs, regs[0]));
-  DEFINE(FGRET_REGS_X1,			offsetof(struct fgraph_ret_regs, regs[1]));
-  DEFINE(FGRET_REGS_X2,			offsetof(struct fgraph_ret_regs, regs[2]));
-  DEFINE(FGRET_REGS_X3,			offsetof(struct fgraph_ret_regs, regs[3]));
-  DEFINE(FGRET_REGS_X4,			offsetof(struct fgraph_ret_regs, regs[4]));
-  DEFINE(FGRET_REGS_X5,			offsetof(struct fgraph_ret_regs, regs[5]));
-  DEFINE(FGRET_REGS_X6,			offsetof(struct fgraph_ret_regs, regs[6]));
-  DEFINE(FGRET_REGS_X7,			offsetof(struct fgraph_ret_regs, regs[7]));
-  DEFINE(FGRET_REGS_FP,			offsetof(struct fgraph_ret_regs, fp));
-  DEFINE(FGRET_REGS_SIZE,		sizeof(struct fgraph_ret_regs));
-#endif
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
   DEFINE(FTRACE_OPS_DIRECT_CALL,	offsetof(struct ftrace_ops, direct_call));
 #endif
+  DEFINE(PIE_E0_ASM, PIE_E0);
+  DEFINE(PIE_E1_ASM, PIE_E1);
   return 0;
 }
diff --git a/arch/arm64/kernel/cacheinfo.c b/arch/arm64/kernel/cacheinfo.c
index d9c9218fa1fd..309942b06c5b 100644
--- a/arch/arm64/kernel/cacheinfo.c
+++ b/arch/arm64/kernel/cacheinfo.c
@@ -101,16 +101,18 @@ int populate_cache_leaves(unsigned int cpu)
 	unsigned int level, idx;
 	enum cache_type type;
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
-	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
+	struct cacheinfo *infos = this_cpu_ci->info_list;
 
 	for (idx = 0, level = 1; level <= this_cpu_ci->num_levels &&
-	     idx < this_cpu_ci->num_leaves; idx++, level++) {
+	     idx < this_cpu_ci->num_leaves; level++) {
 		type = get_cache_type(level);
 		if (type == CACHE_TYPE_SEPARATE) {
-			ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level);
-			ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level);
+			if (idx + 1 >= this_cpu_ci->num_leaves)
+				break;
+			ci_leaf_init(&infos[idx++], CACHE_TYPE_DATA, level);
+			ci_leaf_init(&infos[idx++], CACHE_TYPE_INST, level);
 		} else {
-			ci_leaf_init(this_leaf++, type, level);
+			ci_leaf_init(&infos[idx++], type, level);
 		}
 	}
 	return 0;
diff --git a/arch/arm64/kernel/compat_alignment.c b/arch/arm64/kernel/compat_alignment.c
index deff21bfa680..b68e1d328d4c 100644
--- a/arch/arm64/kernel/compat_alignment.c
+++ b/arch/arm64/kernel/compat_alignment.c
@@ -368,6 +368,8 @@ int do_compat_alignment_fixup(unsigned long addr, struct pt_regs *regs)
 		return 1;
 	}
 
+	if (!handler)
+		return 1;
 	type = handler(addr, instr, regs);
 
 	if (type == TYPE_ERROR || type == TYPE_FAULT)
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index a78f247029ae..8cb3b575a031 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -14,31 +14,85 @@
 #include <asm/kvm_asm.h>
 #include <asm/smp_plat.h>
 
+static u64 target_impl_cpu_num;
+static struct target_impl_cpu *target_impl_cpus;
+
+bool cpu_errata_set_target_impl(u64 num, void *impl_cpus)
+{
+	if (target_impl_cpu_num || !num || !impl_cpus)
+		return false;
+
+	target_impl_cpu_num = num;
+	target_impl_cpus = impl_cpus;
+	return true;
+}
+
+static inline bool is_midr_in_range(struct midr_range const *range)
+{
+	int i;
+
+	if (!target_impl_cpu_num)
+		return midr_is_cpu_model_range(read_cpuid_id(), range->model,
+					       range->rv_min, range->rv_max);
+
+	for (i = 0; i < target_impl_cpu_num; i++) {
+		if (midr_is_cpu_model_range(target_impl_cpus[i].midr,
+					    range->model,
+					    range->rv_min, range->rv_max))
+			return true;
+	}
+	return false;
+}
+
+bool is_midr_in_range_list(struct midr_range const *ranges)
+{
+	while (ranges->model)
+		if (is_midr_in_range(ranges++))
+			return true;
+	return false;
+}
+EXPORT_SYMBOL_GPL(is_midr_in_range_list);
+
 static bool __maybe_unused
-is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope)
+__is_affected_midr_range(const struct arm64_cpu_capabilities *entry,
+			 u32 midr, u32 revidr)
 {
 	const struct arm64_midr_revidr *fix;
-	u32 midr = read_cpuid_id(), revidr;
-
-	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
-	if (!is_midr_in_range(midr, &entry->midr_range))
+	if (!is_midr_in_range(&entry->midr_range))
 		return false;
 
 	midr &= MIDR_REVISION_MASK | MIDR_VARIANT_MASK;
-	revidr = read_cpuid(REVIDR_EL1);
 	for (fix = entry->fixed_revs; fix && fix->revidr_mask; fix++)
 		if (midr == fix->midr_rv && (revidr & fix->revidr_mask))
 			return false;
-
 	return true;
 }
 
 static bool __maybe_unused
+is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	int i;
+
+	if (!target_impl_cpu_num) {
+		WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+		return __is_affected_midr_range(entry, read_cpuid_id(),
+						read_cpuid(REVIDR_EL1));
+	}
+
+	for (i = 0; i < target_impl_cpu_num; i++) {
+		if (__is_affected_midr_range(entry, target_impl_cpus[i].midr,
+					     target_impl_cpus[i].midr))
+			return true;
+	}
+	return false;
+}
+
+static bool __maybe_unused
 is_affected_midr_range_list(const struct arm64_cpu_capabilities *entry,
 			    int scope)
 {
 	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
-	return is_midr_in_range_list(read_cpuid_id(), entry->midr_range_list);
+	return is_midr_in_range_list(entry->midr_range_list);
 }
 
 static bool __maybe_unused
@@ -186,12 +240,48 @@ static bool __maybe_unused
 has_neoverse_n1_erratum_1542419(const struct arm64_cpu_capabilities *entry,
 				int scope)
 {
-	u32 midr = read_cpuid_id();
 	bool has_dic = read_cpuid_cachetype() & BIT(CTR_EL0_DIC_SHIFT);
 	const struct midr_range range = MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1);
 
 	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
-	return is_midr_in_range(midr, &range) && has_dic;
+	return is_midr_in_range(&range) && has_dic;
+}
+
+static const struct midr_range impdef_pmuv3_cpus[] = {
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_ICESTORM),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_ICESTORM_PRO),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM_PRO),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_ICESTORM_MAX),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM_MAX),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD_PRO),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE_PRO),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD_MAX),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE_MAX),
+	{},
+};
+
+static bool has_impdef_pmuv3(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	u64 dfr0 = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
+	unsigned int pmuver;
+
+	if (!is_kernel_in_hyp_mode())
+		return false;
+
+	pmuver = cpuid_feature_extract_unsigned_field(dfr0,
+						      ID_AA64DFR0_EL1_PMUVer_SHIFT);
+	if (pmuver != ID_AA64DFR0_EL1_PMUVer_IMP_DEF)
+		return false;
+
+	return is_midr_in_range_list(impdef_pmuv3_cpus);
+}
+
+static void cpu_enable_impdef_pmuv3_traps(const struct arm64_cpu_capabilities *__unused)
+{
+	sysreg_clear_set_s(SYS_HACR_EL2, 0, BIT(56));
 }
 
 #ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
@@ -245,7 +335,7 @@ static const struct midr_range cavium_erratum_23154_cpus[] = {
 #endif
 
 #ifdef CONFIG_CAVIUM_ERRATUM_27456
-const struct midr_range cavium_erratum_27456_cpus[] = {
+static const struct midr_range cavium_erratum_27456_cpus[] = {
 	/* Cavium ThunderX, T88 pass 1.x - 2.1 */
 	MIDR_RANGE(MIDR_THUNDERX, 0, 0, 1, 1),
 	/* Cavium ThunderX, T81 pass 1.0 */
@@ -441,6 +531,7 @@ static const struct midr_range erratum_spec_ssbs_list[] = {
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A715),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A720),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A720AE),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A725),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_X1),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_X1C),
@@ -455,6 +546,7 @@ static const struct midr_range erratum_spec_ssbs_list[] = {
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V2),
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V3),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V3AE),
 	{}
 };
 #endif
@@ -467,6 +559,13 @@ static const struct midr_range erratum_ac03_cpu_38_list[] = {
 };
 #endif
 
+#ifdef CONFIG_AMPERE_ERRATUM_AC04_CPU_23
+static const struct midr_range erratum_ac04_cpu_23_list[] = {
+	MIDR_ALL_VERSIONS(MIDR_AMPERE1A),
+	{},
+};
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -786,6 +885,28 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		ERRATA_MIDR_RANGE_LIST(erratum_ac03_cpu_38_list),
 	},
 #endif
+#ifdef CONFIG_AMPERE_ERRATUM_AC04_CPU_23
+	{
+		.desc = "AmpereOne erratum AC04_CPU_23",
+		.capability = ARM64_WORKAROUND_AMPERE_AC04_CPU_23,
+		ERRATA_MIDR_RANGE_LIST(erratum_ac04_cpu_23_list),
+	},
+#endif
+	{
+		.desc = "Broken CNTVOFF_EL2",
+		.capability = ARM64_WORKAROUND_QCOM_ORYON_CNTVOFF,
+		ERRATA_MIDR_RANGE_LIST(((const struct midr_range[]) {
+					MIDR_ALL_VERSIONS(MIDR_QCOM_ORYON_X1),
+					{}
+				})),
+	},
+	{
+		.desc = "Apple IMPDEF PMUv3 Traps",
+		.capability = ARM64_WORKAROUND_PMUV3_IMPDEF_TRAPS,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = has_impdef_pmuv3,
+		.cpu_enable = cpu_enable_impdef_pmuv3_traps,
+	},
 	{
 	}
 };
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 6ce71f444ed8..c840a93b9ef9 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -75,6 +75,7 @@
 #include <linux/cpu.h>
 #include <linux/kasan.h>
 #include <linux/percpu.h>
+#include <linux/sched/isolation.h>
 
 #include <asm/cpu.h>
 #include <asm/cpufeature.h>
@@ -83,8 +84,10 @@
 #include <asm/hwcap.h>
 #include <asm/insn.h>
 #include <asm/kvm_host.h>
+#include <asm/mmu.h>
 #include <asm/mmu_context.h>
 #include <asm/mte.h>
+#include <asm/hypervisor.h>
 #include <asm/processor.h>
 #include <asm/smp.h>
 #include <asm/sysreg.h>
@@ -92,6 +95,7 @@
 #include <asm/vectors.h>
 #include <asm/virt.h>
 
+#include <asm/spectre.h>
 /* Kernel representation of AT_HWCAP and AT_HWCAP2 */
 static DECLARE_BITMAP(elf_hwcap, MAX_CPU_FEATURES) __read_mostly;
 
@@ -112,7 +116,14 @@ static struct arm64_cpu_capabilities const __ro_after_init *cpucap_ptrs[ARM64_NC
 
 DECLARE_BITMAP(boot_cpucaps, ARM64_NCAPS);
 
-bool arm64_use_ng_mappings = false;
+/*
+ * arm64_use_ng_mappings must be placed in the .data section, otherwise it
+ * ends up in the .bss section where it is initialized in early_map_kernel()
+ * after the MMU (with the idmap) was enabled. create_init_idmap() - which
+ * runs before early_map_kernel() and reads the variable via PTE_MAYBE_NG -
+ * may end up generating an incorrect idmap page table attributes.
+ */
+bool arm64_use_ng_mappings __read_mostly = false;
 EXPORT_SYMBOL(arm64_use_ng_mappings);
 
 DEFINE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector) = vectors;
@@ -268,6 +279,8 @@ static const struct arm64_ftr_bits ftr_id_aa64isar2[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64isar3[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR3_EL1_FPRCVT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR3_EL1_LSFE_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR3_EL1_FAMINMAX_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
@@ -293,8 +306,10 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_DF2_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_GCS),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_GCS_SHIFT, 4, 0),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_MTE_frac_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_SME_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_MPAM_frac_SHIFT, 4, 0),
@@ -309,6 +324,8 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = {
 
 static const struct arm64_ftr_bits ftr_id_aa64pfr2[] = {
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR2_EL1_FPMR_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR2_EL1_MTEFAR_SHIFT, 4, ID_AA64PFR2_EL1_MTEFAR_NI),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR2_EL1_MTESTOREONLY_SHIFT, 4, ID_AA64PFR2_EL1_MTESTOREONLY_NI),
 	ARM64_FTR_END,
 };
 
@@ -318,6 +335,8 @@ static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = {
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_F32MM_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_F16MM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_I8MM_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_SM4_SHIFT, 4, 0),
@@ -330,6 +349,8 @@ static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = {
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_BitPerm_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_EltPerm_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_AES_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_SVEver_SHIFT, 4, 0),
@@ -373,6 +394,16 @@ static const struct arm64_ftr_bits ftr_id_aa64smfr0[] = {
 		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_SF8DP4_SHIFT, 1, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
 		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_SF8DP2_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_SBitPerm_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_AES_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_SFEXPA_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_STMOP_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_SMOP4_SHIFT, 1, 0),
 	ARM64_FTR_END,
 };
 
@@ -381,6 +412,8 @@ static const struct arm64_ftr_bits ftr_id_aa64fpfr0[] = {
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, ID_AA64FPFR0_EL1_F8FMA_SHIFT, 1, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, ID_AA64FPFR0_EL1_F8DP4_SHIFT, 1, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, ID_AA64FPFR0_EL1_F8DP2_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, ID_AA64FPFR0_EL1_F8MM8_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, ID_AA64FPFR0_EL1_F8MM4_SHIFT, 1, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, ID_AA64FPFR0_EL1_F8E4M3_SHIFT, 1, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, ID_AA64FPFR0_EL1_F8E5M2_SHIFT, 1, 0),
 	ARM64_FTR_END,
@@ -473,12 +506,14 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr3[] = {
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_POE),
 		       FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR3_EL1_S1POE_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR3_EL1_S1PIE_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR3_EL1_SCTLRX_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR3_EL1_TCRX_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64mmfr4[] = {
 	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR4_EL1_E2H0_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR4_EL1_NV_frac_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
@@ -738,17 +773,17 @@ static const struct arm64_ftr_bits ftr_raz[] = {
 #define ARM64_FTR_REG(id, table)		\
 	__ARM64_FTR_REG_OVERRIDE(#id, id, table, &no_override)
 
-struct arm64_ftr_override id_aa64mmfr0_override;
-struct arm64_ftr_override id_aa64mmfr1_override;
-struct arm64_ftr_override id_aa64mmfr2_override;
-struct arm64_ftr_override id_aa64pfr0_override;
-struct arm64_ftr_override id_aa64pfr1_override;
-struct arm64_ftr_override id_aa64zfr0_override;
-struct arm64_ftr_override id_aa64smfr0_override;
-struct arm64_ftr_override id_aa64isar1_override;
-struct arm64_ftr_override id_aa64isar2_override;
+struct arm64_ftr_override __read_mostly id_aa64mmfr0_override;
+struct arm64_ftr_override __read_mostly id_aa64mmfr1_override;
+struct arm64_ftr_override __read_mostly id_aa64mmfr2_override;
+struct arm64_ftr_override __read_mostly id_aa64pfr0_override;
+struct arm64_ftr_override __read_mostly id_aa64pfr1_override;
+struct arm64_ftr_override __read_mostly id_aa64zfr0_override;
+struct arm64_ftr_override __read_mostly id_aa64smfr0_override;
+struct arm64_ftr_override __read_mostly id_aa64isar1_override;
+struct arm64_ftr_override __read_mostly id_aa64isar2_override;
 
-struct arm64_ftr_override arm64_sw_feature_override;
+struct arm64_ftr_override __read_mostly arm64_sw_feature_override;
 
 static const struct __ftr_reg_entry {
 	u32			sys_id;
@@ -968,7 +1003,7 @@ static void __init sort_ftr_regs(void)
 
 /*
  * Initialise the CPU feature register from Boot CPU values.
- * Also initiliases the strict_mask for the register.
+ * Also initialises the strict_mask for the register.
  * Any bits that are not covered by an arm64_ftr_bits entry are considered
  * RES0 for the system-wide value, and must strictly match.
  */
@@ -1004,17 +1039,16 @@ static void init_cpu_ftr_reg(u32 sys_reg, u64 new)
 				/* Override was valid */
 				ftr_new = tmp;
 				str = "forced";
-			} else if (ftr_ovr == tmp) {
+			} else {
 				/* Override was the safe value */
 				str = "already set";
 			}
 
-			if (str)
-				pr_warn("%s[%d:%d]: %s to %llx\n",
-					reg->name,
-					ftrp->shift + ftrp->width - 1,
-					ftrp->shift, str,
-					tmp & (BIT(ftrp->width) - 1));
+			pr_warn("%s[%d:%d]: %s to %llx\n",
+				reg->name,
+				ftrp->shift + ftrp->width - 1,
+				ftrp->shift, str,
+				tmp & (BIT(ftrp->width) - 1));
 		} else if ((ftr_mask & reg->override->val) == ftr_mask) {
 			reg->override->val &= ~ftr_mask;
 			pr_warn("%s[%d:%d]: impossible override, ignored\n",
@@ -1167,19 +1201,15 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
 	    id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) {
 		unsigned long cpacr = cpacr_save_enable_kernel_sme();
 
-		/*
-		 * We mask out SMPS since even if the hardware
-		 * supports priorities the kernel does not at present
-		 * and we block access to them.
-		 */
-		info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
 		vec_init_vq_map(ARM64_VEC_SME);
 
 		cpacr_restore(cpacr);
 	}
 
-	if (id_aa64pfr0_mpam(info->reg_id_aa64pfr0))
+	if (id_aa64pfr0_mpam(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) {
+		info->reg_mpamidr = read_cpuid(MPAMIDR_EL1);
 		init_cpu_ftr_reg(SYS_MPAMIDR_EL1, info->reg_mpamidr);
+	}
 
 	if (id_aa64pfr1_mte(info->reg_id_aa64pfr1))
 		init_cpu_ftr_reg(SYS_GMID_EL1, info->reg_gmid);
@@ -1390,6 +1420,8 @@ void update_cpu_features(int cpu,
 				      info->reg_id_aa64mmfr2, boot->reg_id_aa64mmfr2);
 	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR3_EL1, cpu,
 				      info->reg_id_aa64mmfr3, boot->reg_id_aa64mmfr3);
+	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR4_EL1, cpu,
+				      info->reg_id_aa64mmfr4, boot->reg_id_aa64mmfr4);
 
 	taint |= check_update_ftr_reg(SYS_ID_AA64PFR0_EL1, cpu,
 				      info->reg_id_aa64pfr0, boot->reg_id_aa64pfr0);
@@ -1423,13 +1455,6 @@ void update_cpu_features(int cpu,
 	    id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) {
 		unsigned long cpacr = cpacr_save_enable_kernel_sme();
 
-		/*
-		 * We mask out SMPS since even if the hardware
-		 * supports priorities the kernel does not at present
-		 * and we block access to them.
-		 */
-		info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
-
 		/* Probe vector lengths */
 		if (!system_capabilities_finalized())
 			vec_update_vq_map(ARM64_VEC_SME);
@@ -1437,7 +1462,8 @@ void update_cpu_features(int cpu,
 		cpacr_restore(cpacr);
 	}
 
-	if (id_aa64pfr0_mpam(info->reg_id_aa64pfr0)) {
+	if (id_aa64pfr0_mpam(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) {
+		info->reg_mpamidr = read_cpuid(MPAMIDR_EL1);
 		taint |= check_update_ftr_reg(SYS_MPAMIDR_EL1, cpu,
 					info->reg_mpamidr, boot->reg_mpamidr);
 	}
@@ -1641,6 +1667,11 @@ const struct cpumask *system_32bit_el0_cpumask(void)
 	return cpu_possible_mask;
 }
 
+const struct cpumask *task_cpu_fallback_mask(struct task_struct *p)
+{
+	return __task_cpu_possible_mask(p, housekeeping_cpumask(HK_TYPE_TICK));
+}
+
 static int __init parse_32bit_el0_param(char *str)
 {
 	allow_mismatched_32bit_el0 = true;
@@ -1783,7 +1814,7 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry,
 	char const *str = "kpti command line option";
 	bool meltdown_safe;
 
-	meltdown_safe = is_midr_in_range_list(read_cpuid_id(), kpti_safe_list);
+	meltdown_safe = is_midr_in_range_list(kpti_safe_list);
 
 	/* Defer to CPU feature registers */
 	if (has_cpuid_feature(entry, scope))
@@ -1853,7 +1884,7 @@ static bool has_nv1(const struct arm64_cpu_capabilities *entry, int scope)
 
 	return (__system_matches_cap(ARM64_HAS_NESTED_VIRT) &&
 		!(has_cpuid_feature(entry, scope) ||
-		  is_midr_in_range_list(read_cpuid_id(), nv1_ni_list)));
+		  is_midr_in_range_list(nv1_ni_list)));
 }
 
 #if defined(ID_AA64MMFR0_EL1_TGRAN_LPA2) && defined(ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2)
@@ -1889,102 +1920,27 @@ static bool has_lpa2(const struct arm64_cpu_capabilities *entry, int scope)
 }
 #endif
 
-#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-#define KPTI_NG_TEMP_VA		(-(1UL << PMD_SHIFT))
-
-extern
-void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt,
-			     phys_addr_t size, pgprot_t prot,
-			     phys_addr_t (*pgtable_alloc)(int), int flags);
-
-static phys_addr_t __initdata kpti_ng_temp_alloc;
-
-static phys_addr_t __init kpti_ng_pgd_alloc(int shift)
-{
-	kpti_ng_temp_alloc -= PAGE_SIZE;
-	return kpti_ng_temp_alloc;
-}
-
-static int __init __kpti_install_ng_mappings(void *__unused)
-{
-	typedef void (kpti_remap_fn)(int, int, phys_addr_t, unsigned long);
-	extern kpti_remap_fn idmap_kpti_install_ng_mappings;
-	kpti_remap_fn *remap_fn;
-
-	int cpu = smp_processor_id();
-	int levels = CONFIG_PGTABLE_LEVELS;
-	int order = order_base_2(levels);
-	u64 kpti_ng_temp_pgd_pa = 0;
-	pgd_t *kpti_ng_temp_pgd;
-	u64 alloc = 0;
-
-	if (levels == 5 && !pgtable_l5_enabled())
-		levels = 4;
-	else if (levels == 4 && !pgtable_l4_enabled())
-		levels = 3;
-
-	remap_fn = (void *)__pa_symbol(idmap_kpti_install_ng_mappings);
-
-	if (!cpu) {
-		alloc = __get_free_pages(GFP_ATOMIC | __GFP_ZERO, order);
-		kpti_ng_temp_pgd = (pgd_t *)(alloc + (levels - 1) * PAGE_SIZE);
-		kpti_ng_temp_alloc = kpti_ng_temp_pgd_pa = __pa(kpti_ng_temp_pgd);
-
-		//
-		// Create a minimal page table hierarchy that permits us to map
-		// the swapper page tables temporarily as we traverse them.
-		//
-		// The physical pages are laid out as follows:
-		//
-		// +--------+-/-------+-/------ +-/------ +-\\\--------+
-		// :  PTE[] : | PMD[] : | PUD[] : | P4D[] : ||| PGD[]  :
-		// +--------+-\-------+-\------ +-\------ +-///--------+
-		//      ^
-		// The first page is mapped into this hierarchy at a PMD_SHIFT
-		// aligned virtual address, so that we can manipulate the PTE
-		// level entries while the mapping is active. The first entry
-		// covers the PTE[] page itself, the remaining entries are free
-		// to be used as a ad-hoc fixmap.
-		//
-		create_kpti_ng_temp_pgd(kpti_ng_temp_pgd, __pa(alloc),
-					KPTI_NG_TEMP_VA, PAGE_SIZE, PAGE_KERNEL,
-					kpti_ng_pgd_alloc, 0);
-	}
-
-	cpu_install_idmap();
-	remap_fn(cpu, num_online_cpus(), kpti_ng_temp_pgd_pa, KPTI_NG_TEMP_VA);
-	cpu_uninstall_idmap();
-
-	if (!cpu) {
-		free_pages(alloc, order);
-		arm64_use_ng_mappings = true;
-	}
-
-	return 0;
-}
-
-static void __init kpti_install_ng_mappings(void)
+#ifdef CONFIG_HW_PERF_EVENTS
+static bool has_pmuv3(const struct arm64_cpu_capabilities *entry, int scope)
 {
-	/* Check whether KPTI is going to be used */
-	if (!arm64_kernel_unmapped_at_el0())
-		return;
+	u64 dfr0 = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
+	unsigned int pmuver;
 
 	/*
-	 * We don't need to rewrite the page-tables if either we've done
-	 * it already or we have KASLR enabled and therefore have not
-	 * created any global mappings at all.
+	 * PMUVer follows the standard ID scheme for an unsigned field with the
+	 * exception of 0xF (IMP_DEF) which is treated specially and implies
+	 * FEAT_PMUv3 is not implemented.
+	 *
+	 * See DDI0487L.a D24.1.3.2 for more details.
 	 */
-	if (arm64_use_ng_mappings)
-		return;
-
-	stop_machine(__kpti_install_ng_mappings, NULL, cpu_online_mask);
-}
+	pmuver = cpuid_feature_extract_unsigned_field(dfr0,
+						      ID_AA64DFR0_EL1_PMUVer_SHIFT);
+	if (pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF)
+		return false;
 
-#else
-static inline void kpti_install_ng_mappings(void)
-{
+	return pmuver >= ID_AA64DFR0_EL1_PMUVer_IMP;
 }
-#endif	/* CONFIG_UNMAP_KERNEL_AT_EL0 */
+#endif
 
 static void cpu_enable_kpti(struct arm64_cpu_capabilities const *cap)
 {
@@ -2014,7 +1970,7 @@ static struct cpumask dbm_cpus __read_mostly;
 
 static inline void __cpu_enable_hw_dbm(void)
 {
-	u64 tcr = read_sysreg(tcr_el1) | TCR_HD;
+	u64 tcr = read_sysreg(tcr_el1) | TCR_EL1_HD;
 
 	write_sysreg(tcr, tcr_el1);
 	isb();
@@ -2036,7 +1992,7 @@ static bool cpu_has_broken_dbm(void)
 		{},
 	};
 
-	return is_midr_in_range_list(read_cpuid_id(), cpus);
+	return is_midr_in_range_list(cpus);
 }
 
 static bool cpu_can_use_dbm(const struct arm64_cpu_capabilities *cap)
@@ -2153,7 +2109,7 @@ static bool has_nested_virt_support(const struct arm64_cpu_capabilities *cap,
 	if (kvm_get_mode() != KVM_MODE_NV)
 		return false;
 
-	if (!has_cpuid_feature(cap, scope)) {
+	if (!cpucap_multi_entry_cap_matches(cap, scope)) {
 		pr_warn("unavailable: %s\n", cap->desc);
 		return false;
 	}
@@ -2167,6 +2123,47 @@ static bool hvhe_possible(const struct arm64_cpu_capabilities *entry,
 	return arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_HVHE);
 }
 
+bool cpu_supports_bbml2_noabort(void)
+{
+	/*
+	 * We want to allow usage of BBML2 in as wide a range of kernel contexts
+	 * as possible. This list is therefore an allow-list of known-good
+	 * implementations that both support BBML2 and additionally, fulfill the
+	 * extra constraint of never generating TLB conflict aborts when using
+	 * the relaxed BBML2 semantics (such aborts make use of BBML2 in certain
+	 * kernel contexts difficult to prove safe against recursive aborts).
+	 *
+	 * Note that implementations can only be considered "known-good" if their
+	 * implementors attest to the fact that the implementation never raises
+	 * TLB conflict aborts for BBML2 mapping granularity changes.
+	 */
+	static const struct midr_range supports_bbml2_noabort_list[] = {
+		MIDR_REV_RANGE(MIDR_CORTEX_X4, 0, 3, 0xf),
+		MIDR_REV_RANGE(MIDR_NEOVERSE_V3, 0, 2, 0xf),
+		MIDR_REV_RANGE(MIDR_NEOVERSE_V3AE, 0, 2, 0xf),
+		MIDR_ALL_VERSIONS(MIDR_NVIDIA_OLYMPUS),
+		MIDR_ALL_VERSIONS(MIDR_AMPERE1),
+		MIDR_ALL_VERSIONS(MIDR_AMPERE1A),
+		{}
+	};
+
+	/* Does our cpu guarantee to never raise TLB conflict aborts? */
+	if (!is_midr_in_range_list(supports_bbml2_noabort_list))
+		return false;
+
+	/*
+	 * We currently ignore the ID_AA64MMFR2_EL1 register, and only care
+	 * about whether the MIDR check passes.
+	 */
+
+	return true;
+}
+
+static bool has_bbml2_noabort(const struct arm64_cpu_capabilities *caps, int scope)
+{
+	return cpu_supports_bbml2_noabort();
+}
+
 #ifdef CONFIG_ARM64_PAN
 static void cpu_enable_pan(const struct arm64_cpu_capabilities *__unused)
 {
@@ -2187,6 +2184,24 @@ static void cpu_clear_disr(const struct arm64_cpu_capabilities *__unused)
 	/* Firmware may have left a deferred SError in this register. */
 	write_sysreg_s(0, SYS_DISR_EL1);
 }
+static bool has_rasv1p1(const struct arm64_cpu_capabilities *__unused, int scope)
+{
+	const struct arm64_cpu_capabilities rasv1p1_caps[] = {
+		{
+			ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, RAS, V1P1)
+		},
+		{
+			ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, RAS, IMP)
+		},
+		{
+			ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, RAS_frac, RASv1p1)
+		},
+	};
+
+	return (has_cpuid_feature(&rasv1p1_caps[0], scope) ||
+		(has_cpuid_feature(&rasv1p1_caps[1], scope) &&
+		 has_cpuid_feature(&rasv1p1_caps[2], scope)));
+}
 #endif /* CONFIG_ARM64_RAS_EXTN */
 
 #ifdef CONFIG_ARM64_PTR_AUTH
@@ -2241,7 +2256,7 @@ static bool has_generic_auth(const struct arm64_cpu_capabilities *entry,
 static void cpu_enable_e0pd(struct arm64_cpu_capabilities const *cap)
 {
 	if (this_cpu_has_cap(ARM64_HAS_E0PD))
-		sysreg_clear_set(tcr_el1, 0, TCR_E0PD1);
+		sysreg_clear_set(tcr_el1, 0, TCR_EL1_E0PD1);
 }
 #endif /* CONFIG_ARM64_E0PD */
 
@@ -2250,11 +2265,11 @@ static bool can_use_gic_priorities(const struct arm64_cpu_capabilities *entry,
 				   int scope)
 {
 	/*
-	 * ARM64_HAS_GIC_CPUIF_SYSREGS has a lower index, and is a boot CPU
+	 * ARM64_HAS_GICV3_CPUIF has a lower index, and is a boot CPU
 	 * feature, so will be detected earlier.
 	 */
-	BUILD_BUG_ON(ARM64_HAS_GIC_PRIO_MASKING <= ARM64_HAS_GIC_CPUIF_SYSREGS);
-	if (!cpus_have_cap(ARM64_HAS_GIC_CPUIF_SYSREGS))
+	BUILD_BUG_ON(ARM64_HAS_GIC_PRIO_MASKING <= ARM64_HAS_GICV3_CPUIF);
+	if (!cpus_have_cap(ARM64_HAS_GICV3_CPUIF))
 		return false;
 
 	return enable_pseudo_nmi;
@@ -2289,6 +2304,49 @@ static bool has_gic_prio_relaxed_sync(const struct arm64_cpu_capabilities *entry
 }
 #endif
 
+static bool can_trap_icv_dir_el1(const struct arm64_cpu_capabilities *entry,
+				 int scope)
+{
+	static const struct midr_range has_vgic_v3[] = {
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M1_ICESTORM),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M1_ICESTORM_PRO),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM_PRO),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M1_ICESTORM_MAX),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM_MAX),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD_PRO),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE_PRO),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD_MAX),
+		MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE_MAX),
+		{},
+	};
+	struct arm_smccc_res res = {};
+
+	BUILD_BUG_ON(ARM64_HAS_ICH_HCR_EL2_TDIR <= ARM64_HAS_GICV3_CPUIF);
+	BUILD_BUG_ON(ARM64_HAS_ICH_HCR_EL2_TDIR <= ARM64_HAS_GICV5_LEGACY);
+	if (!this_cpu_has_cap(ARM64_HAS_GICV3_CPUIF) &&
+	    !is_midr_in_range_list(has_vgic_v3))
+		return false;
+
+	if (!is_hyp_mode_available())
+		return false;
+
+	if (this_cpu_has_cap(ARM64_HAS_GICV5_LEGACY))
+		return true;
+
+	if (is_kernel_in_hyp_mode())
+		res.a1 = read_sysreg_s(SYS_ICH_VTR_EL2);
+	else
+		arm_smccc_1_1_hvc(HVC_GET_ICH_VTR_EL2, &res);
+
+	if (res.a0 == HVC_STUB_ERR)
+		return false;
+
+	return res.a1 & ICH_VTR_EL2_TDS;
+}
+
 #ifdef CONFIG_ARM64_BTI
 static void bti_enable(const struct arm64_cpu_capabilities *__unused)
 {
@@ -2307,17 +2365,21 @@ static void bti_enable(const struct arm64_cpu_capabilities *__unused)
 #ifdef CONFIG_ARM64_MTE
 static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
 {
+	static bool cleared_zero_page = false;
+
 	sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_ATA | SCTLR_EL1_ATA0);
 
 	mte_cpu_setup();
 
 	/*
 	 * Clear the tags in the zero page. This needs to be done via the
-	 * linear map which has the Tagged attribute.
+	 * linear map which has the Tagged attribute. Since this page is
+	 * always mapped as pte_special(), set_pte_at() will not attempt to
+	 * clear the tags or set PG_mte_tagged.
 	 */
-	if (try_page_mte_tagging(ZERO_PAGE(0))) {
+	if (!cleared_zero_page) {
+		cleared_zero_page = true;
 		mte_clear_page_tags(lm_alias(empty_zero_page));
-		set_page_mte_tagged(ZERO_PAGE(0));
 	}
 
 	kasan_init_hw_tags_cpu();
@@ -2376,8 +2438,8 @@ static void cpu_enable_mops(const struct arm64_cpu_capabilities *__unused)
 #ifdef CONFIG_ARM64_POE
 static void cpu_enable_poe(const struct arm64_cpu_capabilities *__unused)
 {
-	sysreg_clear_set(REG_TCR2_EL1, 0, TCR2_EL1x_E0POE);
-	sysreg_clear_set(CPACR_EL1, 0, CPACR_ELx_E0POE);
+	sysreg_clear_set(REG_TCR2_EL1, 0, TCR2_EL1_E0POE);
+	sysreg_clear_set(CPACR_EL1, 0, CPACR_EL1_E0POE);
 }
 #endif
 
@@ -2438,6 +2500,15 @@ test_has_mpam_hcr(const struct arm64_cpu_capabilities *entry, int scope)
 	return idr & MPAMIDR_EL1_HAS_HCR;
 }
 
+static bool
+test_has_gicv5_legacy(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	if (!this_cpu_has_cap(ARM64_HAS_GICV5_CPUIF))
+		return false;
+
+	return !!(read_sysreg_s(SYS_ICC_IDR0_EL1) & ICC_IDR0_EL1_GCIE_LEGACY);
+}
+
 static const struct arm64_cpu_capabilities arm64_features[] = {
 	{
 		.capability = ARM64_ALWAYS_BOOT,
@@ -2450,8 +2521,8 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_always,
 	},
 	{
-		.desc = "GIC system register CPU interface",
-		.capability = ARM64_HAS_GIC_CPUIF_SYSREGS,
+		.desc = "GICv3 CPU interface",
+		.capability = ARM64_HAS_GICV3_CPUIF,
 		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
 		.matches = has_useable_gicv3_cpuif,
 		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, GIC, IMP)
@@ -2510,7 +2581,17 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_NESTED_VIRT,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_nested_virt_support,
-		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, NV2)
+		.match_list = (const struct arm64_cpu_capabilities []){
+			{
+				.matches = has_cpuid_feature,
+				ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, NV2)
+			},
+			{
+				.matches = has_cpuid_feature,
+				ARM64_CPUID_FIELDS(ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY)
+			},
+			{ /* Sentinel */ }
+		},
 	},
 	{
 		.capability = ARM64_HAS_32BIT_EL0_DO_NOT_USE,
@@ -2595,6 +2676,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.cpu_enable = cpu_clear_disr,
 		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, RAS, IMP)
 	},
+	{
+		.desc = "RASv1p1 Extension Support",
+		.capability = ARM64_HAS_RASV1P1_EXTN,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_rasv1p1,
+	},
 #endif /* CONFIG_ARM64_RAS_EXTN */
 #ifdef CONFIG_ARM64_AMU_EXTN
 	{
@@ -2771,6 +2858,15 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_gic_prio_relaxed_sync,
 	},
 #endif
+	{
+		/*
+		 * Depends on having GICv3
+		 */
+		.desc = "ICV_DIR_EL1 trapping",
+		.capability = ARM64_HAS_ICH_HCR_EL2_TDIR,
+		.type = ARM64_CPUCAP_EARLY_LOCAL_CPU_FEATURE,
+		.matches = can_trap_icv_dir_el1,
+	},
 #ifdef CONFIG_ARM64_E0PD
 	{
 		.desc = "E0PD",
@@ -2818,6 +2914,20 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, MTE, MTE3)
 	},
+	{
+		.desc = "FAR on MTE Tag Check Fault",
+		.capability = ARM64_MTE_FAR,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64PFR2_EL1, MTEFAR, IMP)
+	},
+	{
+		.desc = "Store Only MTE Tag Check",
+		.capability = ARM64_MTE_STORE_ONLY,
+		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64PFR2_EL1, MTESTOREONLY, IMP)
+	},
 #endif /* CONFIG_ARM64_MTE */
 	{
 		.desc = "RCpc load-acquire (LDAPR)",
@@ -2833,6 +2943,13 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		ARM64_CPUID_FIELDS(ID_AA64MMFR0_EL1, FGT, IMP)
 	},
+	{
+		.desc = "Fine Grained Traps 2",
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.capability = ARM64_HAS_FGT2,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR0_EL1, FGT, FGT2)
+	},
 #ifdef CONFIG_ARM64_SME
 	{
 		.desc = "Scalable Matrix Extension",
@@ -2918,6 +3035,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, EVT, IMP)
 	},
 	{
+		.desc = "BBM Level 2 without TLB conflict abort",
+		.capability = ARM64_HAS_BBML2_NOABORT,
+		.type = ARM64_CPUCAP_EARLY_LOCAL_CPU_FEATURE,
+		.matches = has_bbml2_noabort,
+	},
+	{
 		.desc = "52-bit Virtual Addressing for KVM (LPA2)",
 		.capability = ARM64_HAS_LPA2,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
@@ -2990,6 +3113,41 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, GCS, IMP)
 	},
 #endif
+#ifdef CONFIG_HW_PERF_EVENTS
+	{
+		.desc = "PMUv3",
+		.capability = ARM64_HAS_PMUV3,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_pmuv3,
+	},
+#endif
+	{
+		.desc = "SCTLR2",
+		.capability = ARM64_HAS_SCTLR2,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR3_EL1, SCTLRX, IMP)
+	},
+	{
+		.desc = "GICv5 CPU interface",
+		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
+		.capability = ARM64_HAS_GICV5_CPUIF,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64PFR2_EL1, GCIE, IMP)
+	},
+	{
+		.desc = "GICv5 Legacy vCPU interface",
+		.type = ARM64_CPUCAP_EARLY_LOCAL_CPU_FEATURE,
+		.capability = ARM64_HAS_GICV5_LEGACY,
+		.matches = test_has_gicv5_legacy,
+	},
+	{
+		.desc = "XNX",
+		.capability = ARM64_HAS_XNX,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, XNX, IMP)
+	},
 	{},
 };
 
@@ -3022,6 +3180,13 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = match,						\
 	}
 
+#define HWCAP_CAP_MATCH_ID(match, reg, field, min_value, cap_type, cap)		\
+	{									\
+		__HWCAP_CAP(#cap, cap_type, cap)				\
+		HWCAP_CPUID_MATCH(reg, field, min_value) 			\
+		.matches = match,						\
+	}
+
 #ifdef CONFIG_ARM64_PTR_AUTH
 static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = {
 	{
@@ -3050,6 +3215,20 @@ static const struct arm64_cpu_capabilities ptr_auth_hwcap_gen_matches[] = {
 };
 #endif
 
+#ifdef CONFIG_ARM64_SVE
+static bool has_sve_feature(const struct arm64_cpu_capabilities *cap, int scope)
+{
+	return system_supports_sve() && has_user_cpuid_feature(cap, scope);
+}
+#endif
+
+#ifdef CONFIG_ARM64_SME
+static bool has_sme_feature(const struct arm64_cpu_capabilities *cap, int scope)
+{
+	return system_supports_sme() && has_user_cpuid_feature(cap, scope);
+}
+#endif
+
 static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ISAR0_EL1, AES, PMULL, CAP_HWCAP, KERNEL_HWCAP_PMULL),
 	HWCAP_CAP(ID_AA64ISAR0_EL1, AES, AES, CAP_HWCAP, KERNEL_HWCAP_AES),
@@ -3068,6 +3247,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ISAR0_EL1, TS, FLAGM, CAP_HWCAP, KERNEL_HWCAP_FLAGM),
 	HWCAP_CAP(ID_AA64ISAR0_EL1, TS, FLAGM2, CAP_HWCAP, KERNEL_HWCAP_FLAGM2),
 	HWCAP_CAP(ID_AA64ISAR0_EL1, RNDR, IMP, CAP_HWCAP, KERNEL_HWCAP_RNG),
+	HWCAP_CAP(ID_AA64ISAR3_EL1, FPRCVT, IMP, CAP_HWCAP, KERNEL_HWCAP_FPRCVT),
 	HWCAP_CAP(ID_AA64PFR0_EL1, FP, IMP, CAP_HWCAP, KERNEL_HWCAP_FP),
 	HWCAP_CAP(ID_AA64PFR0_EL1, FP, FP16, CAP_HWCAP, KERNEL_HWCAP_FPHP),
 	HWCAP_CAP(ID_AA64PFR0_EL1, AdvSIMD, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMD),
@@ -3089,22 +3269,28 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ISAR1_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_I8MM),
 	HWCAP_CAP(ID_AA64ISAR2_EL1, LUT, IMP, CAP_HWCAP, KERNEL_HWCAP_LUT),
 	HWCAP_CAP(ID_AA64ISAR3_EL1, FAMINMAX, IMP, CAP_HWCAP, KERNEL_HWCAP_FAMINMAX),
+	HWCAP_CAP(ID_AA64ISAR3_EL1, LSFE, IMP, CAP_HWCAP, KERNEL_HWCAP_LSFE),
 	HWCAP_CAP(ID_AA64MMFR2_EL1, AT, IMP, CAP_HWCAP, KERNEL_HWCAP_USCAT),
 #ifdef CONFIG_ARM64_SVE
 	HWCAP_CAP(ID_AA64PFR0_EL1, SVE, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, SVEver, SVE2p1, CAP_HWCAP, KERNEL_HWCAP_SVE2P1),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, SVEver, SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, AES, PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, BitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE_B16B16),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, EBF16, CAP_HWCAP, KERNEL_HWCAP_SVE_EBF16),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, SM4, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESM4),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, F32MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM),
-	HWCAP_CAP(ID_AA64ZFR0_EL1, F64MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, SVEver, SVE2p2, CAP_HWCAP, KERNEL_HWCAP_SVE2P2),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, SVEver, SVE2p1, CAP_HWCAP, KERNEL_HWCAP_SVE2P1),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, SVEver, SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, AES, PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, AES, AES2, CAP_HWCAP, KERNEL_HWCAP_SVE_AES2),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, BitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE_B16B16),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, B16B16, BFSCALE, CAP_HWCAP, KERNEL_HWCAP_SVE_BFSCALE),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, BF16, EBF16, CAP_HWCAP, KERNEL_HWCAP_SVE_EBF16),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, SM4, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESM4),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, F32MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, F64MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, F16MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE_F16MM),
+	HWCAP_CAP_MATCH_ID(has_sve_feature, ID_AA64ZFR0_EL1, EltPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE_ELTPERM),
 #endif
 #ifdef CONFIG_ARM64_GCS
 	HWCAP_CAP(ID_AA64PFR1_EL1, GCS, IMP, CAP_HWCAP, KERNEL_HWCAP_GCS),
@@ -3120,10 +3306,13 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 #ifdef CONFIG_ARM64_MTE
 	HWCAP_CAP(ID_AA64PFR1_EL1, MTE, MTE2, CAP_HWCAP, KERNEL_HWCAP_MTE),
 	HWCAP_CAP(ID_AA64PFR1_EL1, MTE, MTE3, CAP_HWCAP, KERNEL_HWCAP_MTE3),
+	HWCAP_CAP(ID_AA64PFR2_EL1, MTEFAR, IMP, CAP_HWCAP, KERNEL_HWCAP_MTE_FAR),
+	HWCAP_CAP(ID_AA64PFR2_EL1, MTESTOREONLY, IMP, CAP_HWCAP , KERNEL_HWCAP_MTE_STORE_ONLY),
 #endif /* CONFIG_ARM64_MTE */
 	HWCAP_CAP(ID_AA64MMFR0_EL1, ECV, IMP, CAP_HWCAP, KERNEL_HWCAP_ECV),
 	HWCAP_CAP(ID_AA64MMFR1_EL1, AFP, IMP, CAP_HWCAP, KERNEL_HWCAP_AFP),
 	HWCAP_CAP(ID_AA64ISAR2_EL1, CSSC, IMP, CAP_HWCAP, KERNEL_HWCAP_CSSC),
+	HWCAP_CAP(ID_AA64ISAR2_EL1, CSSC, CMPBR, CAP_HWCAP, KERNEL_HWCAP_CMPBR),
 	HWCAP_CAP(ID_AA64ISAR2_EL1, RPRFM, IMP, CAP_HWCAP, KERNEL_HWCAP_RPRFM),
 	HWCAP_CAP(ID_AA64ISAR2_EL1, RPRES, IMP, CAP_HWCAP, KERNEL_HWCAP_RPRES),
 	HWCAP_CAP(ID_AA64ISAR2_EL1, WFxT, IMP, CAP_HWCAP, KERNEL_HWCAP_WFXT),
@@ -3131,30 +3320,38 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ISAR2_EL1, BC, IMP, CAP_HWCAP, KERNEL_HWCAP_HBC),
 #ifdef CONFIG_ARM64_SME
 	HWCAP_CAP(ID_AA64PFR1_EL1, SME, IMP, CAP_HWCAP, KERNEL_HWCAP_SME),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, FA64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_FA64),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, LUTv2, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_LUTV2),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SMEver, SME2p1, CAP_HWCAP, KERNEL_HWCAP_SME2P1),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SMEver, SME2, CAP_HWCAP, KERNEL_HWCAP_SME2),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, I16I64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I64),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F64F64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F64F64),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, I16I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16B16),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F16F16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F16),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F8F16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F8F16),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F8F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F8F32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, I8I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I8I32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, B16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16F32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, BI32I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_BI32I32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, F32F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F32F32),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SF8FMA, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8FMA),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SF8DP4, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8DP4),
-	HWCAP_CAP(ID_AA64SMFR0_EL1, SF8DP2, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8DP2),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, FA64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_FA64),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, LUTv2, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_LUTV2),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SMEver, SME2p2, CAP_HWCAP, KERNEL_HWCAP_SME2P2),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SMEver, SME2p1, CAP_HWCAP, KERNEL_HWCAP_SME2P1),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SMEver, SME2, CAP_HWCAP, KERNEL_HWCAP_SME2),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, I16I64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I64),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F64F64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F64F64),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, I16I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16B16),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F16F16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F16),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F8F16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F8F16),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F8F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F8F32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, I8I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I8I32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, B16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16F32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, BI32I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_BI32I32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, F32F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F32F32),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SF8FMA, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8FMA),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SF8DP4, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8DP4),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SF8DP2, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SF8DP2),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SBitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SBITPERM),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_AES),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SFEXPA, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SFEXPA),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, STMOP, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_STMOP),
+	HWCAP_CAP_MATCH_ID(has_sme_feature, ID_AA64SMFR0_EL1, SMOP4, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_SMOP4),
 #endif /* CONFIG_ARM64_SME */
 	HWCAP_CAP(ID_AA64FPFR0_EL1, F8CVT, IMP, CAP_HWCAP, KERNEL_HWCAP_F8CVT),
 	HWCAP_CAP(ID_AA64FPFR0_EL1, F8FMA, IMP, CAP_HWCAP, KERNEL_HWCAP_F8FMA),
 	HWCAP_CAP(ID_AA64FPFR0_EL1, F8DP4, IMP, CAP_HWCAP, KERNEL_HWCAP_F8DP4),
 	HWCAP_CAP(ID_AA64FPFR0_EL1, F8DP2, IMP, CAP_HWCAP, KERNEL_HWCAP_F8DP2),
+	HWCAP_CAP(ID_AA64FPFR0_EL1, F8MM8, IMP, CAP_HWCAP, KERNEL_HWCAP_F8MM8),
+	HWCAP_CAP(ID_AA64FPFR0_EL1, F8MM4, IMP, CAP_HWCAP, KERNEL_HWCAP_F8MM4),
 	HWCAP_CAP(ID_AA64FPFR0_EL1, F8E4M3, IMP, CAP_HWCAP, KERNEL_HWCAP_F8E4M3),
 	HWCAP_CAP(ID_AA64FPFR0_EL1, F8E5M2, IMP, CAP_HWCAP, KERNEL_HWCAP_F8E5M2),
 #ifdef CONFIG_ARM64_POE
@@ -3270,18 +3467,49 @@ static void update_cpu_capabilities(u16 scope_mask)
 
 	scope_mask &= ARM64_CPUCAP_SCOPE_MASK;
 	for (i = 0; i < ARM64_NCAPS; i++) {
+		bool match_all = false;
+		bool caps_set = false;
+		bool boot_cpu = false;
+
 		caps = cpucap_ptrs[i];
-		if (!caps || !(caps->type & scope_mask) ||
-		    cpus_have_cap(caps->capability) ||
-		    !caps->matches(caps, cpucap_default_scope(caps)))
+		if (!caps || !(caps->type & scope_mask))
+			continue;
+
+		match_all = cpucap_match_all_early_cpus(caps);
+		caps_set = cpus_have_cap(caps->capability);
+		boot_cpu = scope_mask & SCOPE_BOOT_CPU;
+
+		/*
+		 * Unless it's a match-all CPUs feature, avoid probing if
+		 * already detected.
+		 */
+		if (!match_all && caps_set)
+			continue;
+
+		/*
+		 * A match-all CPUs capability is only set when probing the
+		 * boot CPU. It may be cleared subsequently if not detected on
+		 * secondary ones.
+		 */
+		if (match_all && !caps_set && !boot_cpu)
 			continue;
 
-		if (caps->desc && !caps->cpus)
+		if (!caps->matches(caps, cpucap_default_scope(caps))) {
+			if (match_all)
+				__clear_bit(caps->capability, system_cpucaps);
+			continue;
+		}
+
+		/*
+		 * Match-all CPUs capabilities are logged later when the
+		 * system capabilities are finalised.
+		 */
+		if (!match_all && caps->desc && !caps->cpus)
 			pr_info("detected: %s\n", caps->desc);
 
 		__set_bit(caps->capability, system_cpucaps);
 
-		if ((scope_mask & SCOPE_BOOT_CPU) && (caps->type & SCOPE_BOOT_CPU))
+		if (boot_cpu && (caps->type & SCOPE_BOOT_CPU))
 			set_bit(caps->capability, boot_cpucaps);
 	}
 }
@@ -3478,7 +3706,7 @@ static void verify_hyp_capabilities(void)
 		return;
 
 	safe_mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
-	mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
+	mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
 	mmfr1 = read_cpuid(ID_AA64MMFR1_EL1);
 
 	/* Verify VMID bits */
@@ -3642,6 +3870,7 @@ unsigned long cpu_get_elf_hwcap3(void)
 
 static void __init setup_boot_cpu_capabilities(void)
 {
+	kvm_arm_target_impl_cpu_init();
 	/*
 	 * The boot CPU's feature register values have been recorded. Detect
 	 * boot cpucaps and local cpucaps for the boot CPU, then enable and
@@ -3681,17 +3910,24 @@ static void __init setup_system_capabilities(void)
 	enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU);
 	apply_alternatives_all();
 
-	/*
-	 * Log any cpucaps with a cpumask as these aren't logged by
-	 * update_cpu_capabilities().
-	 */
 	for (int i = 0; i < ARM64_NCAPS; i++) {
 		const struct arm64_cpu_capabilities *caps = cpucap_ptrs[i];
 
-		if (caps && caps->cpus && caps->desc &&
-			cpumask_any(caps->cpus) < nr_cpu_ids)
+		if (!caps || !caps->desc)
+			continue;
+
+		/*
+		 * Log any cpucaps with a cpumask as these aren't logged by
+		 * update_cpu_capabilities().
+		 */
+		if (caps->cpus && cpumask_any(caps->cpus) < nr_cpu_ids)
 			pr_info("detected: %s on CPU%*pbl\n",
 				caps->desc, cpumask_pr_args(caps->cpus));
+
+		/* Log match-all CPUs capabilities */
+		if (cpucap_match_all_early_cpus(caps) &&
+		    cpus_have_cap(caps->capability))
+			pr_info("detected: %s\n", caps->desc);
 	}
 
 	/*
@@ -3699,12 +3935,18 @@ static void __init setup_system_capabilities(void)
 	 */
 	if (system_uses_ttbr0_pan())
 		pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n");
+
+	/*
+	 * Report Spectre mitigations status.
+	 */
+	spectre_print_disabled_mitigations();
 }
 
 void __init setup_system_features(void)
 {
 	setup_system_capabilities();
 
+	linear_map_maybe_split_to_ptes();
 	kpti_install_ng_mappings();
 
 	sve_setup();
@@ -3742,7 +3984,14 @@ static int enable_mismatched_32bit_el0(unsigned int cpu)
 	static int lucky_winner = -1;
 
 	struct cpuinfo_arm64 *info = &per_cpu(cpu_data, cpu);
-	bool cpu_32bit = id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0);
+	bool cpu_32bit = false;
+
+	if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0)) {
+		if (!housekeeping_cpu(cpu, HK_TYPE_TICK))
+			pr_info("Treating adaptive-ticks CPU %u as 64-bit only\n", cpu);
+		else
+			cpu_32bit = true;
+	}
 
 	if (cpu_32bit) {
 		cpumask_set_cpu(cpu, cpu_32bit_el0_mask);
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index d79e88fccdfc..c44e6d94f5de 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -145,6 +145,24 @@ static const char *const hwcap_str[] = {
 	[KERNEL_HWCAP_SME_SF8DP4]	= "smesf8dp4",
 	[KERNEL_HWCAP_SME_SF8DP2]	= "smesf8dp2",
 	[KERNEL_HWCAP_POE]		= "poe",
+	[KERNEL_HWCAP_CMPBR]		= "cmpbr",
+	[KERNEL_HWCAP_FPRCVT]		= "fprcvt",
+	[KERNEL_HWCAP_F8MM8]		= "f8mm8",
+	[KERNEL_HWCAP_F8MM4]		= "f8mm4",
+	[KERNEL_HWCAP_SVE_F16MM]	= "svef16mm",
+	[KERNEL_HWCAP_SVE_ELTPERM]	= "sveeltperm",
+	[KERNEL_HWCAP_SVE_AES2]		= "sveaes2",
+	[KERNEL_HWCAP_SVE_BFSCALE]	= "svebfscale",
+	[KERNEL_HWCAP_SVE2P2]		= "sve2p2",
+	[KERNEL_HWCAP_SME2P2]		= "sme2p2",
+	[KERNEL_HWCAP_SME_SBITPERM]	= "smesbitperm",
+	[KERNEL_HWCAP_SME_AES]		= "smeaes",
+	[KERNEL_HWCAP_SME_SFEXPA]	= "smesfexpa",
+	[KERNEL_HWCAP_SME_STMOP]	= "smestmop",
+	[KERNEL_HWCAP_SME_SMOP4]	= "smesmop4",
+	[KERNEL_HWCAP_MTE_FAR]		= "mtefar",
+	[KERNEL_HWCAP_MTE_STORE_ONLY]	= "mtestoreonly",
+	[KERNEL_HWCAP_LSFE]		= "lsfe",
 };
 
 #ifdef CONFIG_COMPAT
@@ -194,80 +212,79 @@ static const char *const compat_hwcap2_str[] = {
 
 static int c_show(struct seq_file *m, void *v)
 {
-	int i, j;
+	int j;
+	int cpu = m->index;
 	bool compat = personality(current->personality) == PER_LINUX32;
+	struct cpuinfo_arm64 *cpuinfo = v;
+	u32 midr = cpuinfo->reg_midr;
 
-	for_each_online_cpu(i) {
-		struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
-		u32 midr = cpuinfo->reg_midr;
-
-		/*
-		 * glibc reads /proc/cpuinfo to determine the number of
-		 * online processors, looking for lines beginning with
-		 * "processor".  Give glibc what it expects.
-		 */
-		seq_printf(m, "processor\t: %d\n", i);
-		if (compat)
-			seq_printf(m, "model name\t: ARMv8 Processor rev %d (%s)\n",
-				   MIDR_REVISION(midr), COMPAT_ELF_PLATFORM);
+	/*
+	 * glibc reads /proc/cpuinfo to determine the number of
+	 * online processors, looking for lines beginning with
+	 * "processor".  Give glibc what it expects.
+	 */
+	seq_printf(m, "processor\t: %d\n", cpu);
+	if (compat)
+		seq_printf(m, "model name\t: ARMv8 Processor rev %d (%s)\n",
+			   MIDR_REVISION(midr), COMPAT_ELF_PLATFORM);
 
-		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
-			   loops_per_jiffy / (500000UL/HZ),
-			   loops_per_jiffy / (5000UL/HZ) % 100);
+	seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+		   loops_per_jiffy / (500000UL/HZ),
+		   loops_per_jiffy / (5000UL/HZ) % 100);
 
-		/*
-		 * Dump out the common processor features in a single line.
-		 * Userspace should read the hwcaps with getauxval(AT_HWCAP)
-		 * rather than attempting to parse this, but there's a body of
-		 * software which does already (at least for 32-bit).
-		 */
-		seq_puts(m, "Features\t:");
-		if (compat) {
+	/*
+	 * Dump out the common processor features in a single line.
+	 * Userspace should read the hwcaps with getauxval(AT_HWCAP)
+	 * rather than attempting to parse this, but there's a body of
+	 * software which does already (at least for 32-bit).
+	 */
+	seq_puts(m, "Features\t:");
+	if (compat) {
 #ifdef CONFIG_COMPAT
-			for (j = 0; j < ARRAY_SIZE(compat_hwcap_str); j++) {
-				if (compat_elf_hwcap & (1 << j)) {
-					/*
-					 * Warn once if any feature should not
-					 * have been present on arm64 platform.
-					 */
-					if (WARN_ON_ONCE(!compat_hwcap_str[j]))
-						continue;
-
-					seq_printf(m, " %s", compat_hwcap_str[j]);
-				}
+		for (j = 0; j < ARRAY_SIZE(compat_hwcap_str); j++) {
+			if (compat_elf_hwcap & (1 << j)) {
+				/*
+				 * Warn once if any feature should not
+				 * have been present on arm64 platform.
+				 */
+				if (WARN_ON_ONCE(!compat_hwcap_str[j]))
+					continue;
+
+				seq_printf(m, " %s", compat_hwcap_str[j]);
 			}
+		}
 
-			for (j = 0; j < ARRAY_SIZE(compat_hwcap2_str); j++)
-				if (compat_elf_hwcap2 & (1 << j))
-					seq_printf(m, " %s", compat_hwcap2_str[j]);
+		for (j = 0; j < ARRAY_SIZE(compat_hwcap2_str); j++)
+			if (compat_elf_hwcap2 & (1 << j))
+				seq_printf(m, " %s", compat_hwcap2_str[j]);
 #endif /* CONFIG_COMPAT */
-		} else {
-			for (j = 0; j < ARRAY_SIZE(hwcap_str); j++)
-				if (cpu_have_feature(j))
-					seq_printf(m, " %s", hwcap_str[j]);
-		}
-		seq_puts(m, "\n");
-
-		seq_printf(m, "CPU implementer\t: 0x%02x\n",
-			   MIDR_IMPLEMENTOR(midr));
-		seq_printf(m, "CPU architecture: 8\n");
-		seq_printf(m, "CPU variant\t: 0x%x\n", MIDR_VARIANT(midr));
-		seq_printf(m, "CPU part\t: 0x%03x\n", MIDR_PARTNUM(midr));
-		seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr));
+	} else {
+		for (j = 0; j < ARRAY_SIZE(hwcap_str); j++)
+			if (cpu_have_feature(j))
+				seq_printf(m, " %s", hwcap_str[j]);
 	}
+	seq_puts(m, "\n");
+
+	seq_printf(m, "CPU implementer\t: 0x%02x\n",
+		   MIDR_IMPLEMENTOR(midr));
+	seq_puts(m, "CPU architecture: 8\n");
+	seq_printf(m, "CPU variant\t: 0x%x\n", MIDR_VARIANT(midr));
+	seq_printf(m, "CPU part\t: 0x%03x\n", MIDR_PARTNUM(midr));
+	seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr));
 
 	return 0;
 }
 
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
-	return *pos < 1 ? (void *)1 : NULL;
+	*pos = cpumask_next(*pos - 1, cpu_online_mask);
+	return *pos < nr_cpu_ids ? &per_cpu(cpu_data, *pos) : NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
 	++*pos;
-	return NULL;
+	return c_start(m, pos);
 }
 
 static void c_stop(struct seq_file *m, void *v)
@@ -313,11 +330,13 @@ static const struct kobj_type cpuregs_kobj_type = {
 
 CPUREGS_ATTR_RO(midr_el1, midr);
 CPUREGS_ATTR_RO(revidr_el1, revidr);
+CPUREGS_ATTR_RO(aidr_el1, aidr);
 CPUREGS_ATTR_RO(smidr_el1, smidr);
 
 static struct attribute *cpuregs_id_attrs[] = {
 	&cpuregs_attr_midr_el1.attr,
 	&cpuregs_attr_revidr_el1.attr,
+	&cpuregs_attr_aidr_el1.attr,
 	NULL
 };
 
@@ -454,6 +473,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
 	info->reg_dczid = read_cpuid(DCZID_EL0);
 	info->reg_midr = read_cpuid_id();
 	info->reg_revidr = read_cpuid(REVIDR_EL1);
+	info->reg_aidr = read_cpuid(AIDR_EL1);
 
 	info->reg_id_aa64dfr0 = read_cpuid(ID_AA64DFR0_EL1);
 	info->reg_id_aa64dfr1 = read_cpuid(ID_AA64DFR1_EL1);
@@ -479,8 +499,21 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
 	if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0))
 		__cpuinfo_store_cpu_32bit(&info->aarch32);
 
-	if (id_aa64pfr0_mpam(info->reg_id_aa64pfr0))
-		info->reg_mpamidr = read_cpuid(MPAMIDR_EL1);
+	/*
+	 * info->reg_mpamidr deferred to {init,update}_cpu_features because we
+	 * don't want to read it (and trigger a trap on buggy firmware) if
+	 * using an aa64pfr0_el1 override to unconditionally disable MPAM.
+	 */
+
+	if (IS_ENABLED(CONFIG_ARM64_SME) &&
+	    id_aa64pfr1_sme(info->reg_id_aa64pfr1)) {
+		/*
+		 * We mask out SMPS since even if the hardware
+		 * supports priorities the kernel does not at present
+		 * and we block access to them.
+		 */
+		info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
+	}
 
 	cpuinfo_detect_icache_policy(info);
 }
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 58f047de3e1c..29307642f4c9 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -21,8 +21,12 @@
 #include <asm/cputype.h>
 #include <asm/daifflags.h>
 #include <asm/debug-monitors.h>
+#include <asm/exception.h>
+#include <asm/kgdb.h>
+#include <asm/kprobes.h>
 #include <asm/system_misc.h>
 #include <asm/traps.h>
+#include <asm/uprobes.h>
 
 /* Determine debug architecture. */
 u8 debug_monitors_arch(void)
@@ -34,7 +38,7 @@ u8 debug_monitors_arch(void)
 /*
  * MDSCR access routines.
  */
-static void mdscr_write(u32 mdscr)
+static void mdscr_write(u64 mdscr)
 {
 	unsigned long flags;
 	flags = local_daif_save();
@@ -43,7 +47,7 @@ static void mdscr_write(u32 mdscr)
 }
 NOKPROBE_SYMBOL(mdscr_write);
 
-static u32 mdscr_read(void)
+static u64 mdscr_read(void)
 {
 	return read_sysreg(mdscr_el1);
 }
@@ -79,16 +83,16 @@ static DEFINE_PER_CPU(int, kde_ref_count);
 
 void enable_debug_monitors(enum dbg_active_el el)
 {
-	u32 mdscr, enable = 0;
+	u64 mdscr, enable = 0;
 
 	WARN_ON(preemptible());
 
 	if (this_cpu_inc_return(mde_ref_count) == 1)
-		enable = DBG_MDSCR_MDE;
+		enable = MDSCR_EL1_MDE;
 
 	if (el == DBG_ACTIVE_EL1 &&
 	    this_cpu_inc_return(kde_ref_count) == 1)
-		enable |= DBG_MDSCR_KDE;
+		enable |= MDSCR_EL1_KDE;
 
 	if (enable && debug_enabled) {
 		mdscr = mdscr_read();
@@ -100,16 +104,16 @@ NOKPROBE_SYMBOL(enable_debug_monitors);
 
 void disable_debug_monitors(enum dbg_active_el el)
 {
-	u32 mdscr, disable = 0;
+	u64 mdscr, disable = 0;
 
 	WARN_ON(preemptible());
 
 	if (this_cpu_dec_return(mde_ref_count) == 0)
-		disable = ~DBG_MDSCR_MDE;
+		disable = ~MDSCR_EL1_MDE;
 
 	if (el == DBG_ACTIVE_EL1 &&
 	    this_cpu_dec_return(kde_ref_count) == 0)
-		disable &= ~DBG_MDSCR_KDE;
+		disable &= ~MDSCR_EL1_KDE;
 
 	if (disable) {
 		mdscr = mdscr_read();
@@ -156,187 +160,124 @@ NOKPROBE_SYMBOL(clear_user_regs_spsr_ss);
 #define set_regs_spsr_ss(r)	set_user_regs_spsr_ss(&(r)->user_regs)
 #define clear_regs_spsr_ss(r)	clear_user_regs_spsr_ss(&(r)->user_regs)
 
-static DEFINE_SPINLOCK(debug_hook_lock);
-static LIST_HEAD(user_step_hook);
-static LIST_HEAD(kernel_step_hook);
-
-static void register_debug_hook(struct list_head *node, struct list_head *list)
+static void send_user_sigtrap(int si_code)
 {
-	spin_lock(&debug_hook_lock);
-	list_add_rcu(node, list);
-	spin_unlock(&debug_hook_lock);
-
-}
+	struct pt_regs *regs = current_pt_regs();
 
-static void unregister_debug_hook(struct list_head *node)
-{
-	spin_lock(&debug_hook_lock);
-	list_del_rcu(node);
-	spin_unlock(&debug_hook_lock);
-	synchronize_rcu();
-}
+	if (WARN_ON(!user_mode(regs)))
+		return;
 
-void register_user_step_hook(struct step_hook *hook)
-{
-	register_debug_hook(&hook->node, &user_step_hook);
-}
+	if (!regs_irqs_disabled(regs))
+		local_irq_enable();
 
-void unregister_user_step_hook(struct step_hook *hook)
-{
-	unregister_debug_hook(&hook->node);
+	arm64_force_sig_fault(SIGTRAP, si_code, instruction_pointer(regs),
+			      "User debug trap");
 }
 
-void register_kernel_step_hook(struct step_hook *hook)
+/*
+ * We have already unmasked interrupts and enabled preemption
+ * when calling do_el0_softstep() from entry-common.c.
+ */
+void do_el0_softstep(unsigned long esr, struct pt_regs *regs)
 {
-	register_debug_hook(&hook->node, &kernel_step_hook);
-}
+	if (uprobe_single_step_handler(regs, esr) == DBG_HOOK_HANDLED)
+		return;
 
-void unregister_kernel_step_hook(struct step_hook *hook)
-{
-	unregister_debug_hook(&hook->node);
+	send_user_sigtrap(TRAP_TRACE);
+	/*
+	 * ptrace will disable single step unless explicitly
+	 * asked to re-enable it. For other clients, it makes
+	 * sense to leave it enabled (i.e. rewind the controls
+	 * to the active-not-pending state).
+	 */
+	user_rewind_single_step(current);
 }
 
-/*
- * Call registered single step handlers
- * There is no Syndrome info to check for determining the handler.
- * So we call all the registered handlers, until the right handler is
- * found which returns zero.
- */
-static int call_step_hook(struct pt_regs *regs, unsigned long esr)
+void do_el1_softstep(unsigned long esr, struct pt_regs *regs)
 {
-	struct step_hook *hook;
-	struct list_head *list;
-	int retval = DBG_HOOK_ERROR;
-
-	list = user_mode(regs) ? &user_step_hook : &kernel_step_hook;
+	if (kgdb_single_step_handler(regs, esr) == DBG_HOOK_HANDLED)
+		return;
 
+	pr_warn("Unexpected kernel single-step exception at EL1\n");
 	/*
-	 * Since single-step exception disables interrupt, this function is
-	 * entirely not preemptible, and we can use rcu list safely here.
+	 * Re-enable stepping since we know that we will be
+	 * returning to regs.
 	 */
-	list_for_each_entry_rcu(hook, list, node)	{
-		retval = hook->fn(regs, esr);
-		if (retval == DBG_HOOK_HANDLED)
-			break;
-	}
-
-	return retval;
+	set_regs_spsr_ss(regs);
 }
-NOKPROBE_SYMBOL(call_step_hook);
+NOKPROBE_SYMBOL(do_el1_softstep);
 
-static void send_user_sigtrap(int si_code)
+static int call_el1_break_hook(struct pt_regs *regs, unsigned long esr)
 {
-	struct pt_regs *regs = current_pt_regs();
+	if (esr_brk_comment(esr) == BUG_BRK_IMM)
+		return bug_brk_handler(regs, esr);
 
-	if (WARN_ON(!user_mode(regs)))
-		return;
+	if (IS_ENABLED(CONFIG_CFI) && esr_is_cfi_brk(esr))
+		return cfi_brk_handler(regs, esr);
 
-	if (interrupts_enabled(regs))
-		local_irq_enable();
+	if (esr_brk_comment(esr) == FAULT_BRK_IMM)
+		return reserved_fault_brk_handler(regs, esr);
 
-	arm64_force_sig_fault(SIGTRAP, si_code, instruction_pointer(regs),
-			      "User debug trap");
-}
+	if (IS_ENABLED(CONFIG_KASAN_SW_TAGS) &&
+		(esr_brk_comment(esr) & ~KASAN_BRK_MASK) == KASAN_BRK_IMM)
+		return kasan_brk_handler(regs, esr);
 
-static int single_step_handler(unsigned long unused, unsigned long esr,
-			       struct pt_regs *regs)
-{
-	bool handler_found = false;
+	if (IS_ENABLED(CONFIG_UBSAN_TRAP) && esr_is_ubsan_brk(esr))
+		return ubsan_brk_handler(regs, esr);
 
-	/*
-	 * If we are stepping a pending breakpoint, call the hw_breakpoint
-	 * handler first.
-	 */
-	if (!reinstall_suspended_bps(regs))
-		return 0;
-
-	if (!handler_found && call_step_hook(regs, esr) == DBG_HOOK_HANDLED)
-		handler_found = true;
-
-	if (!handler_found && user_mode(regs)) {
-		send_user_sigtrap(TRAP_TRACE);
-
-		/*
-		 * ptrace will disable single step unless explicitly
-		 * asked to re-enable it. For other clients, it makes
-		 * sense to leave it enabled (i.e. rewind the controls
-		 * to the active-not-pending state).
-		 */
-		user_rewind_single_step(current);
-	} else if (!handler_found) {
-		pr_warn("Unexpected kernel single-step exception at EL1\n");
-		/*
-		 * Re-enable stepping since we know that we will be
-		 * returning to regs.
-		 */
-		set_regs_spsr_ss(regs);
+	if (IS_ENABLED(CONFIG_KGDB)) {
+		if (esr_brk_comment(esr) == KGDB_DYN_DBG_BRK_IMM)
+			return kgdb_brk_handler(regs, esr);
+		if (esr_brk_comment(esr) == KGDB_COMPILED_DBG_BRK_IMM)
+			return kgdb_compiled_brk_handler(regs, esr);
 	}
 
-	return 0;
-}
-NOKPROBE_SYMBOL(single_step_handler);
-
-static LIST_HEAD(user_break_hook);
-static LIST_HEAD(kernel_break_hook);
+	if (IS_ENABLED(CONFIG_KPROBES)) {
+		if (esr_brk_comment(esr) == KPROBES_BRK_IMM)
+			return kprobe_brk_handler(regs, esr);
+		if (esr_brk_comment(esr) == KPROBES_BRK_SS_IMM)
+			return kprobe_ss_brk_handler(regs, esr);
+	}
 
-void register_user_break_hook(struct break_hook *hook)
-{
-	register_debug_hook(&hook->node, &user_break_hook);
-}
+	if (IS_ENABLED(CONFIG_KRETPROBES) &&
+		esr_brk_comment(esr) == KRETPROBES_BRK_IMM)
+		return kretprobe_brk_handler(regs, esr);
 
-void unregister_user_break_hook(struct break_hook *hook)
-{
-	unregister_debug_hook(&hook->node);
+	return DBG_HOOK_ERROR;
 }
+NOKPROBE_SYMBOL(call_el1_break_hook);
 
-void register_kernel_break_hook(struct break_hook *hook)
+/*
+ * We have already unmasked interrupts and enabled preemption
+ * when calling do_el0_brk64() from entry-common.c.
+ */
+void do_el0_brk64(unsigned long esr, struct pt_regs *regs)
 {
-	register_debug_hook(&hook->node, &kernel_break_hook);
-}
+	if (IS_ENABLED(CONFIG_UPROBES) &&
+		esr_brk_comment(esr) == UPROBES_BRK_IMM &&
+		uprobe_brk_handler(regs, esr) == DBG_HOOK_HANDLED)
+		return;
 
-void unregister_kernel_break_hook(struct break_hook *hook)
-{
-	unregister_debug_hook(&hook->node);
+	send_user_sigtrap(TRAP_BRKPT);
 }
 
-static int call_break_hook(struct pt_regs *regs, unsigned long esr)
+void do_el1_brk64(unsigned long esr, struct pt_regs *regs)
 {
-	struct break_hook *hook;
-	struct list_head *list;
-
-	list = user_mode(regs) ? &user_break_hook : &kernel_break_hook;
-
-	/*
-	 * Since brk exception disables interrupt, this function is
-	 * entirely not preemptible, and we can use rcu list safely here.
-	 */
-	list_for_each_entry_rcu(hook, list, node) {
-		if ((esr_brk_comment(esr) & ~hook->mask) == hook->imm)
-			return hook->fn(regs, esr);
-	}
+	if (call_el1_break_hook(regs, esr) == DBG_HOOK_HANDLED)
+		return;
 
-	return DBG_HOOK_ERROR;
+	die("Oops - BRK", regs, esr);
 }
-NOKPROBE_SYMBOL(call_break_hook);
+NOKPROBE_SYMBOL(do_el1_brk64);
 
-static int brk_handler(unsigned long unused, unsigned long esr,
-		       struct pt_regs *regs)
+#ifdef CONFIG_COMPAT
+void do_bkpt32(unsigned long esr, struct pt_regs *regs)
 {
-	if (call_break_hook(regs, esr) == DBG_HOOK_HANDLED)
-		return 0;
-
-	if (user_mode(regs)) {
-		send_user_sigtrap(TRAP_BRKPT);
-	} else {
-		pr_warn("Unexpected kernel BRK exception at EL1\n");
-		return -EFAULT;
-	}
-
-	return 0;
+	arm64_notify_die("aarch32 BKPT", regs, SIGTRAP, TRAP_BRKPT, regs->pc, esr);
 }
-NOKPROBE_SYMBOL(brk_handler);
+#endif /* CONFIG_COMPAT */
 
-int aarch32_break_handler(struct pt_regs *regs)
+bool try_handle_aarch32_break(struct pt_regs *regs)
 {
 	u32 arm_instr;
 	u16 thumb_instr;
@@ -344,7 +285,7 @@ int aarch32_break_handler(struct pt_regs *regs)
 	void __user *pc = (void __user *)instruction_pointer(regs);
 
 	if (!compat_user_mode(regs))
-		return -EFAULT;
+		return false;
 
 	if (compat_thumb_mode(regs)) {
 		/* get 16-bit Thumb instruction */
@@ -368,20 +309,12 @@ int aarch32_break_handler(struct pt_regs *regs)
 	}
 
 	if (!bp)
-		return -EFAULT;
+		return false;
 
 	send_user_sigtrap(TRAP_BRKPT);
-	return 0;
-}
-NOKPROBE_SYMBOL(aarch32_break_handler);
-
-void __init debug_traps_init(void)
-{
-	hook_debug_fault_code(DBG_ESR_EVT_HWSS, single_step_handler, SIGTRAP,
-			      TRAP_TRACE, "single-step handler");
-	hook_debug_fault_code(DBG_ESR_EVT_BRK, brk_handler, SIGTRAP,
-			      TRAP_BRKPT, "BRK handler");
+	return true;
 }
+NOKPROBE_SYMBOL(try_handle_aarch32_break);
 
 /* Re-enable single step for syscall restarting. */
 void user_rewind_single_step(struct task_struct *task)
@@ -415,7 +348,7 @@ void kernel_enable_single_step(struct pt_regs *regs)
 {
 	WARN_ON(!irqs_disabled());
 	set_regs_spsr_ss(regs);
-	mdscr_write(mdscr_read() | DBG_MDSCR_SS);
+	mdscr_write(mdscr_read() | MDSCR_EL1_SS);
 	enable_debug_monitors(DBG_ACTIVE_EL1);
 }
 NOKPROBE_SYMBOL(kernel_enable_single_step);
@@ -423,7 +356,7 @@ NOKPROBE_SYMBOL(kernel_enable_single_step);
 void kernel_disable_single_step(void)
 {
 	WARN_ON(!irqs_disabled());
-	mdscr_write(mdscr_read() & ~DBG_MDSCR_SS);
+	mdscr_write(mdscr_read() & ~MDSCR_EL1_SS);
 	disable_debug_monitors(DBG_ACTIVE_EL1);
 }
 NOKPROBE_SYMBOL(kernel_disable_single_step);
@@ -431,7 +364,7 @@ NOKPROBE_SYMBOL(kernel_disable_single_step);
 int kernel_active_single_step(void)
 {
 	WARN_ON(!irqs_disabled());
-	return mdscr_read() & DBG_MDSCR_SS;
+	return mdscr_read() & MDSCR_EL1_SS;
 }
 NOKPROBE_SYMBOL(kernel_active_single_step);
 
diff --git a/arch/arm64/kernel/efi-header.S b/arch/arm64/kernel/efi-header.S
index 11d7f7de202d..329e8df9215f 100644
--- a/arch/arm64/kernel/efi-header.S
+++ b/arch/arm64/kernel/efi-header.S
@@ -28,7 +28,7 @@
 	.macro	__EFI_PE_HEADER
 #ifdef CONFIG_EFI
 	.set	.Lpe_header_offset, . - .L_head
-	.long	PE_MAGIC
+	.long	IMAGE_NT_SIGNATURE
 	.short	IMAGE_FILE_MACHINE_ARM64		// Machine
 	.short	.Lsection_count				// NumberOfSections
 	.long	0 					// TimeDateStamp
@@ -40,7 +40,7 @@
 		IMAGE_FILE_LINE_NUMS_STRIPPED		// Characteristics
 
 .Loptional_header:
-	.short	PE_OPT_MAGIC_PE32PLUS			// PE32+ format
+	.short	IMAGE_NT_OPTIONAL_HDR64_MAGIC		// PE32+ format
 	.byte	0x02					// MajorLinkerVersion
 	.byte	0x14					// MinorLinkerVersion
 	.long	__initdata_begin - .Lefi_header_end	// SizeOfCode
@@ -66,7 +66,7 @@
 	.long	.Lefi_header_end - .L_head		// SizeOfHeaders
 	.long	0					// CheckSum
 	.short	IMAGE_SUBSYSTEM_EFI_APPLICATION		// Subsystem
-	.short	IMAGE_DLL_CHARACTERISTICS_NX_COMPAT	// DllCharacteristics
+	.short	IMAGE_DLLCHARACTERISTICS_NX_COMPAT	// DllCharacteristics
 	.quad	0					// SizeOfStackReserve
 	.quad	0					// SizeOfStackCommit
 	.quad	0					// SizeOfHeapReserve
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
index 1d25d8899dbf..a81cb4aa4738 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
@@ -10,11 +10,13 @@
 #include <linux/efi.h>
 #include <linux/init.h>
 #include <linux/kmemleak.h>
+#include <linux/kthread.h>
 #include <linux/screen_info.h>
 #include <linux/vmalloc.h>
 
 #include <asm/efi.h>
 #include <asm/stacktrace.h>
+#include <asm/vmap_stack.h>
 
 static bool region_is_misaligned(const efi_memory_desc_t *md)
 {
@@ -29,7 +31,7 @@ static bool region_is_misaligned(const efi_memory_desc_t *md)
  * executable, everything else can be mapped with the XN bits
  * set. Also take the new (optional) RO/XP bits into account.
  */
-static __init pteval_t create_mapping_protection(efi_memory_desc_t *md)
+static __init ptdesc_t create_mapping_protection(efi_memory_desc_t *md)
 {
 	u64 attr = md->attribute;
 	u32 type = md->type;
@@ -83,7 +85,7 @@ static __init pteval_t create_mapping_protection(efi_memory_desc_t *md)
 
 int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 {
-	pteval_t prot_val = create_mapping_protection(md);
+	ptdesc_t prot_val = create_mapping_protection(md);
 	bool page_mappings_only = (md->type == EFI_RUNTIME_SERVICES_CODE ||
 				   md->type == EFI_RUNTIME_SERVICES_DATA);
 
@@ -164,20 +166,53 @@ asmlinkage efi_status_t efi_handle_corrupted_x18(efi_status_t s, const char *f)
 	return s;
 }
 
-static DEFINE_RAW_SPINLOCK(efi_rt_lock);
-
 void arch_efi_call_virt_setup(void)
 {
-	efi_virtmap_load();
+	efi_runtime_assert_lock_held();
+
+	if (preemptible() && (current->flags & PF_KTHREAD)) {
+		/*
+		 * Disable migration to ensure that a preempted EFI runtime
+		 * service call will be resumed on the same CPU. This avoids
+		 * potential issues with EFI runtime calls that are preempted
+		 * while polling for an asynchronous completion of a secure
+		 * firmware call, which may not permit the CPU to change.
+		 */
+		migrate_disable();
+		kthread_use_mm(&efi_mm);
+	} else {
+		efi_virtmap_load();
+	}
+
+	/*
+	 * Enable access to the valid TTBR0_EL1 and invoke the errata
+	 * workaround directly since there is no return from exception when
+	 * invoking the EFI run-time services.
+	 */
+	uaccess_ttbr0_enable();
+	post_ttbr_update_workaround();
+
 	__efi_fpsimd_begin();
-	raw_spin_lock(&efi_rt_lock);
 }
 
 void arch_efi_call_virt_teardown(void)
 {
-	raw_spin_unlock(&efi_rt_lock);
 	__efi_fpsimd_end();
-	efi_virtmap_unload();
+
+	/*
+	 * Defer the switch to the current thread's TTBR0_EL1 until
+	 * uaccess_enable(). Do so before efi_virtmap_unload() updates the
+	 * saved TTBR0 value, so the userland page tables are not activated
+	 * inadvertently over the back of an exception.
+	 */
+	uaccess_ttbr0_disable();
+
+	if (preemptible() && (current->flags & PF_KTHREAD)) {
+		kthread_unuse_mm(&efi_mm);
+		migrate_enable();
+	} else {
+		efi_virtmap_unload();
+	}
 }
 
 asmlinkage u64 *efi_rt_stack_top __ro_after_init;
@@ -214,9 +249,8 @@ static int __init arm64_efi_rt_init(void)
 	if (!efi_enabled(EFI_RUNTIME_SERVICES))
 		return 0;
 
-	p = __vmalloc_node(THREAD_SIZE, THREAD_ALIGN, GFP_KERNEL,
-			   NUMA_NO_NODE, &&l);
-l:	if (!p) {
+	p = arch_alloc_vmap_stack(THREAD_SIZE, NUMA_NO_NODE);
+	if (!p) {
 		pr_warn("Failed to allocate EFI runtime stack\n");
 		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
 		return -ENOMEM;
diff --git a/arch/arm64/kernel/elfcore.c b/arch/arm64/kernel/elfcore.c
index 2e94d20c4ac7..b735f4c2fe5e 100644
--- a/arch/arm64/kernel/elfcore.c
+++ b/arch/arm64/kernel/elfcore.c
@@ -27,9 +27,10 @@ static int mte_dump_tag_range(struct coredump_params *cprm,
 	int ret = 1;
 	unsigned long addr;
 	void *tags = NULL;
+	int locked = 0;
 
 	for (addr = start; addr < start + len; addr += PAGE_SIZE) {
-		struct page *page = get_dump_page(addr);
+		struct page *page = get_dump_page(addr, &locked);
 
 		/*
 		 * get_dump_page() returns NULL when encountering an empty
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index b260ddc4d3e9..3625797e9ee8 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -6,8 +6,10 @@
  */
 
 #include <linux/context_tracking.h>
+#include <linux/irq-entry-common.h>
 #include <linux/kasan.h>
 #include <linux/linkage.h>
+#include <linux/livepatch.h>
 #include <linux/lockdep.h>
 #include <linux/ptrace.h>
 #include <linux/resume_user_mode.h>
@@ -32,67 +34,28 @@
  * Handle IRQ/context state management when entering from kernel mode.
  * Before this function is called it is not safe to call regular kernel code,
  * instrumentable code, or any code which may trigger an exception.
- *
- * This is intended to match the logic in irqentry_enter(), handling the kernel
- * mode transitions only.
  */
-static __always_inline void __enter_from_kernel_mode(struct pt_regs *regs)
+static noinstr irqentry_state_t enter_from_kernel_mode(struct pt_regs *regs)
 {
-	regs->exit_rcu = false;
-
-	if (!IS_ENABLED(CONFIG_TINY_RCU) && is_idle_task(current)) {
-		lockdep_hardirqs_off(CALLER_ADDR0);
-		ct_irq_enter();
-		trace_hardirqs_off_finish();
-
-		regs->exit_rcu = true;
-		return;
-	}
-
-	lockdep_hardirqs_off(CALLER_ADDR0);
-	rcu_irq_enter_check_tick();
-	trace_hardirqs_off_finish();
-}
+	irqentry_state_t state;
 
-static void noinstr enter_from_kernel_mode(struct pt_regs *regs)
-{
-	__enter_from_kernel_mode(regs);
+	state = irqentry_enter(regs);
 	mte_check_tfsr_entry();
 	mte_disable_tco_entry(current);
+
+	return state;
 }
 
 /*
  * Handle IRQ/context state management when exiting to kernel mode.
  * After this function returns it is not safe to call regular kernel code,
  * instrumentable code, or any code which may trigger an exception.
- *
- * This is intended to match the logic in irqentry_exit(), handling the kernel
- * mode transitions only, and with preemption handled elsewhere.
  */
-static __always_inline void __exit_to_kernel_mode(struct pt_regs *regs)
-{
-	lockdep_assert_irqs_disabled();
-
-	if (interrupts_enabled(regs)) {
-		if (regs->exit_rcu) {
-			trace_hardirqs_on_prepare();
-			lockdep_hardirqs_on_prepare();
-			ct_irq_exit();
-			lockdep_hardirqs_on(CALLER_ADDR0);
-			return;
-		}
-
-		trace_hardirqs_on();
-	} else {
-		if (regs->exit_rcu)
-			ct_irq_exit();
-	}
-}
-
-static void noinstr exit_to_kernel_mode(struct pt_regs *regs)
+static void noinstr exit_to_kernel_mode(struct pt_regs *regs,
+					irqentry_state_t state)
 {
 	mte_check_tfsr_exit();
-	__exit_to_kernel_mode(regs);
+	irqentry_exit(regs, state);
 }
 
 /*
@@ -100,129 +63,30 @@ static void noinstr exit_to_kernel_mode(struct pt_regs *regs)
  * Before this function is called it is not safe to call regular kernel code,
  * instrumentable code, or any code which may trigger an exception.
  */
-static __always_inline void __enter_from_user_mode(void)
+static __always_inline void arm64_enter_from_user_mode(struct pt_regs *regs)
 {
-	lockdep_hardirqs_off(CALLER_ADDR0);
-	CT_WARN_ON(ct_state() != CT_STATE_USER);
-	user_exit_irqoff();
-	trace_hardirqs_off_finish();
+	enter_from_user_mode(regs);
 	mte_disable_tco_entry(current);
 }
 
-static __always_inline void enter_from_user_mode(struct pt_regs *regs)
-{
-	__enter_from_user_mode();
-}
-
 /*
  * Handle IRQ/context state management when exiting to user mode.
  * After this function returns it is not safe to call regular kernel code,
  * instrumentable code, or any code which may trigger an exception.
  */
-static __always_inline void __exit_to_user_mode(void)
-{
-	trace_hardirqs_on_prepare();
-	lockdep_hardirqs_on_prepare();
-	user_enter_irqoff();
-	lockdep_hardirqs_on(CALLER_ADDR0);
-}
 
-static void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags)
+static __always_inline void arm64_exit_to_user_mode(struct pt_regs *regs)
 {
-	do {
-		local_irq_enable();
-
-		if (thread_flags & _TIF_NEED_RESCHED)
-			schedule();
-
-		if (thread_flags & _TIF_UPROBE)
-			uprobe_notify_resume(regs);
-
-		if (thread_flags & _TIF_MTE_ASYNC_FAULT) {
-			clear_thread_flag(TIF_MTE_ASYNC_FAULT);
-			send_sig_fault(SIGSEGV, SEGV_MTEAERR,
-				       (void __user *)NULL, current);
-		}
-
-		if (thread_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
-			do_signal(regs);
-
-		if (thread_flags & _TIF_NOTIFY_RESUME)
-			resume_user_mode_work(regs);
-
-		if (thread_flags & _TIF_FOREIGN_FPSTATE)
-			fpsimd_restore_current_state();
-
-		local_irq_disable();
-		thread_flags = read_thread_flags();
-	} while (thread_flags & _TIF_WORK_MASK);
-}
-
-static __always_inline void exit_to_user_mode_prepare(struct pt_regs *regs)
-{
-	unsigned long flags;
-
 	local_irq_disable();
-
-	flags = read_thread_flags();
-	if (unlikely(flags & _TIF_WORK_MASK))
-		do_notify_resume(regs, flags);
-
+	exit_to_user_mode_prepare_legacy(regs);
 	local_daif_mask();
-
-	lockdep_sys_exit();
-}
-
-static __always_inline void exit_to_user_mode(struct pt_regs *regs)
-{
-	exit_to_user_mode_prepare(regs);
 	mte_check_tfsr_exit();
-	__exit_to_user_mode();
+	exit_to_user_mode();
 }
 
 asmlinkage void noinstr asm_exit_to_user_mode(struct pt_regs *regs)
 {
-	exit_to_user_mode(regs);
-}
-
-/*
- * Handle IRQ/context state management when entering an NMI from user/kernel
- * mode. Before this function is called it is not safe to call regular kernel
- * code, instrumentable code, or any code which may trigger an exception.
- */
-static void noinstr arm64_enter_nmi(struct pt_regs *regs)
-{
-	regs->lockdep_hardirqs = lockdep_hardirqs_enabled();
-
-	__nmi_enter();
-	lockdep_hardirqs_off(CALLER_ADDR0);
-	lockdep_hardirq_enter();
-	ct_nmi_enter();
-
-	trace_hardirqs_off_finish();
-	ftrace_nmi_enter();
-}
-
-/*
- * Handle IRQ/context state management when exiting an NMI from user/kernel
- * mode. After this function returns it is not safe to call regular kernel
- * code, instrumentable code, or any code which may trigger an exception.
- */
-static void noinstr arm64_exit_nmi(struct pt_regs *regs)
-{
-	bool restore = regs->lockdep_hardirqs;
-
-	ftrace_nmi_exit();
-	if (restore) {
-		trace_hardirqs_on_prepare();
-		lockdep_hardirqs_on_prepare();
-	}
-
-	ct_nmi_exit();
-	lockdep_hardirq_exit();
-	if (restore)
-		lockdep_hardirqs_on(CALLER_ADDR0);
-	__nmi_exit();
+	arm64_exit_to_user_mode(regs);
 }
 
 /*
@@ -230,14 +94,18 @@ static void noinstr arm64_exit_nmi(struct pt_regs *regs)
  * kernel mode. Before this function is called it is not safe to call regular
  * kernel code, instrumentable code, or any code which may trigger an exception.
  */
-static void noinstr arm64_enter_el1_dbg(struct pt_regs *regs)
+static noinstr irqentry_state_t arm64_enter_el1_dbg(struct pt_regs *regs)
 {
-	regs->lockdep_hardirqs = lockdep_hardirqs_enabled();
+	irqentry_state_t state;
+
+	state.lockdep = lockdep_hardirqs_enabled();
 
 	lockdep_hardirqs_off(CALLER_ADDR0);
 	ct_nmi_enter();
 
 	trace_hardirqs_off_finish();
+
+	return state;
 }
 
 /*
@@ -245,62 +113,19 @@ static void noinstr arm64_enter_el1_dbg(struct pt_regs *regs)
  * kernel mode. After this function returns it is not safe to call regular
  * kernel code, instrumentable code, or any code which may trigger an exception.
  */
-static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs)
+static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs,
+				       irqentry_state_t state)
 {
-	bool restore = regs->lockdep_hardirqs;
-
-	if (restore) {
+	if (state.lockdep) {
 		trace_hardirqs_on_prepare();
 		lockdep_hardirqs_on_prepare();
 	}
 
 	ct_nmi_exit();
-	if (restore)
+	if (state.lockdep)
 		lockdep_hardirqs_on(CALLER_ADDR0);
 }
 
-#ifdef CONFIG_PREEMPT_DYNAMIC
-DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
-#define need_irq_preemption() \
-	(static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
-#else
-#define need_irq_preemption()	(IS_ENABLED(CONFIG_PREEMPTION))
-#endif
-
-static void __sched arm64_preempt_schedule_irq(void)
-{
-	if (!need_irq_preemption())
-		return;
-
-	/*
-	 * Note: thread_info::preempt_count includes both thread_info::count
-	 * and thread_info::need_resched, and is not equivalent to
-	 * preempt_count().
-	 */
-	if (READ_ONCE(current_thread_info()->preempt_count) != 0)
-		return;
-
-	/*
-	 * DAIF.DA are cleared at the start of IRQ/FIQ handling, and when GIC
-	 * priority masking is used the GIC irqchip driver will clear DAIF.IF
-	 * using gic_arch_enable_irqs() for normal IRQs. If anything is set in
-	 * DAIF we must have handled an NMI, so skip preemption.
-	 */
-	if (system_uses_irq_prio_masking() && read_sysreg(daif))
-		return;
-
-	/*
-	 * Preempting a task from an IRQ means we leave copies of PSTATE
-	 * on the stack. cpufeature's enable calls may modify PSTATE, but
-	 * resuming one of these preempted tasks would undo those changes.
-	 *
-	 * Only allow a task to be preempted once cpufeatures have been
-	 * enabled.
-	 */
-	if (system_capabilities_finalized())
-		preempt_schedule_irq();
-}
-
 static void do_interrupt_handler(struct pt_regs *regs,
 				 void (*handler)(struct pt_regs *))
 {
@@ -320,7 +145,7 @@ extern void (*handle_arch_fiq)(struct pt_regs *);
 static void noinstr __panic_unhandled(struct pt_regs *regs, const char *vector,
 				      unsigned long esr)
 {
-	arm64_enter_nmi(regs);
+	irqentry_nmi_enter(regs);
 
 	console_verbose();
 
@@ -344,7 +169,7 @@ static DEFINE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa);
 
 static void cortex_a76_erratum_1463225_svc_handler(void)
 {
-	u32 reg, val;
+	u64 reg, val;
 
 	if (!unlikely(test_thread_flag(TIF_SINGLESTEP)))
 		return;
@@ -354,7 +179,7 @@ static void cortex_a76_erratum_1463225_svc_handler(void)
 
 	__this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 1);
 	reg = read_sysreg(mdscr_el1);
-	val = reg | DBG_MDSCR_SS | DBG_MDSCR_KDE;
+	val = reg | MDSCR_EL1_SS | MDSCR_EL1_KDE;
 	write_sysreg(val, mdscr_el1);
 	asm volatile("msr daifclr, #8");
 	isb();
@@ -393,20 +218,16 @@ static bool cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
  * As per the ABI exit SME streaming mode and clear the SVE state not
  * shared with FPSIMD on syscall entry.
  */
-static inline void fp_user_discard(void)
+static inline void fpsimd_syscall_enter(void)
 {
-	/*
-	 * If SME is active then exit streaming mode.  If ZA is active
-	 * then flush the SVE registers but leave userspace access to
-	 * both SVE and SME enabled, otherwise disable SME for the
-	 * task and fall through to disabling SVE too.  This means
-	 * that after a syscall we never have any streaming mode
-	 * register state to track, if this changes the KVM code will
-	 * need updating.
-	 */
+	/* Ensure PSTATE.SM is clear, but leave PSTATE.ZA as-is. */
 	if (system_supports_sme())
 		sme_smstop_sm();
 
+	/*
+	 * The CPU is not in streaming mode. If non-streaming SVE is not
+	 * supported, there is no SVE state that needs to be discarded.
+	 */
 	if (!system_supports_sve())
 		return;
 
@@ -416,8 +237,57 @@ static inline void fp_user_discard(void)
 		sve_vq_minus_one = sve_vq_from_vl(task_get_sve_vl(current)) - 1;
 		sve_flush_live(true, sve_vq_minus_one);
 	}
+
+	/*
+	 * Any live non-FPSIMD SVE state has been zeroed. Allow
+	 * fpsimd_save_user_state() to lazily discard SVE state until either
+	 * the live state is unbound or fpsimd_syscall_exit() is called.
+	 */
+	__this_cpu_write(fpsimd_last_state.to_save, FP_STATE_FPSIMD);
 }
 
+static __always_inline void fpsimd_syscall_exit(void)
+{
+	if (!system_supports_sve())
+		return;
+
+	/*
+	 * The current task's user FPSIMD/SVE/SME state is now bound to this
+	 * CPU. The fpsimd_last_state.to_save value is either:
+	 *
+	 * - FP_STATE_FPSIMD, if the state has not been reloaded on this CPU
+	 *   since fpsimd_syscall_enter().
+	 *
+	 * - FP_STATE_CURRENT, if the state has been reloaded on this CPU at
+	 *   any point.
+	 *
+	 * Reset this to FP_STATE_CURRENT to stop lazy discarding.
+	 */
+	__this_cpu_write(fpsimd_last_state.to_save, FP_STATE_CURRENT);
+}
+
+/*
+ * In debug exception context, we explicitly disable preemption despite
+ * having interrupts disabled.
+ * This serves two purposes: it makes it much less likely that we would
+ * accidentally schedule in exception context and it will force a warning
+ * if we somehow manage to schedule by accident.
+ */
+static void debug_exception_enter(struct pt_regs *regs)
+{
+	preempt_disable();
+
+	/* This code is a bit fragile.  Test it. */
+	RCU_LOCKDEP_WARN(!rcu_is_watching(), "exception_enter didn't work");
+}
+NOKPROBE_SYMBOL(debug_exception_enter);
+
+static void debug_exception_exit(struct pt_regs *regs)
+{
+	preempt_enable_no_resched();
+}
+NOKPROBE_SYMBOL(debug_exception_exit);
+
 UNHANDLED(el1t, 64, sync)
 UNHANDLED(el1t, 64, irq)
 UNHANDLED(el1t, 64, fiq)
@@ -426,78 +296,135 @@ UNHANDLED(el1t, 64, error)
 static void noinstr el1_abort(struct pt_regs *regs, unsigned long esr)
 {
 	unsigned long far = read_sysreg(far_el1);
+	irqentry_state_t state;
 
-	enter_from_kernel_mode(regs);
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_mem_abort(far, esr, regs);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_pc(struct pt_regs *regs, unsigned long esr)
 {
 	unsigned long far = read_sysreg(far_el1);
+	irqentry_state_t state;
 
-	enter_from_kernel_mode(regs);
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_sp_pc_abort(far, esr, regs);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_undef(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_el1_undef(regs, esr);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_bti(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_el1_bti(regs, esr);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_gcs(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_el1_gcs(regs, esr);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_mops(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_el1_mops(regs, esr);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
+}
+
+static void noinstr el1_breakpt(struct pt_regs *regs, unsigned long esr)
+{
+	irqentry_state_t state;
+
+	state = arm64_enter_el1_dbg(regs);
+	debug_exception_enter(regs);
+	do_breakpoint(esr, regs);
+	debug_exception_exit(regs);
+	arm64_exit_el1_dbg(regs, state);
+}
+
+static void noinstr el1_softstp(struct pt_regs *regs, unsigned long esr)
+{
+	irqentry_state_t state;
+
+	state = arm64_enter_el1_dbg(regs);
+	if (!cortex_a76_erratum_1463225_debug_handler(regs)) {
+		debug_exception_enter(regs);
+		/*
+		 * After handling a breakpoint, we suspend the breakpoint
+		 * and use single-step to move to the next instruction.
+		 * If we are stepping a suspended breakpoint there's nothing more to do:
+		 * the single-step is complete.
+		 */
+		if (!try_step_suspended_breakpoints(regs))
+			do_el1_softstep(esr, regs);
+		debug_exception_exit(regs);
+	}
+	arm64_exit_el1_dbg(regs, state);
 }
 
-static void noinstr el1_dbg(struct pt_regs *regs, unsigned long esr)
+static void noinstr el1_watchpt(struct pt_regs *regs, unsigned long esr)
 {
+	/* Watchpoints are the only debug exception to write FAR_EL1 */
 	unsigned long far = read_sysreg(far_el1);
+	irqentry_state_t state;
+
+	state = arm64_enter_el1_dbg(regs);
+	debug_exception_enter(regs);
+	do_watchpoint(far, esr, regs);
+	debug_exception_exit(regs);
+	arm64_exit_el1_dbg(regs, state);
+}
 
-	arm64_enter_el1_dbg(regs);
-	if (!cortex_a76_erratum_1463225_debug_handler(regs))
-		do_debug_exception(far, esr, regs);
-	arm64_exit_el1_dbg(regs);
+static void noinstr el1_brk64(struct pt_regs *regs, unsigned long esr)
+{
+	irqentry_state_t state;
+
+	state = arm64_enter_el1_dbg(regs);
+	debug_exception_enter(regs);
+	do_el1_brk64(esr, regs);
+	debug_exception_exit(regs);
+	arm64_exit_el1_dbg(regs, state);
 }
 
 static void noinstr el1_fpac(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_el1_fpac(regs, esr);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 asmlinkage void noinstr el1h_64_sync_handler(struct pt_regs *regs)
@@ -530,10 +457,16 @@ asmlinkage void noinstr el1h_64_sync_handler(struct pt_regs *regs)
 		el1_mops(regs, esr);
 		break;
 	case ESR_ELx_EC_BREAKPT_CUR:
+		el1_breakpt(regs, esr);
+		break;
 	case ESR_ELx_EC_SOFTSTP_CUR:
+		el1_softstp(regs, esr);
+		break;
 	case ESR_ELx_EC_WATCHPT_CUR:
+		el1_watchpt(regs, esr);
+		break;
 	case ESR_ELx_EC_BRK64:
-		el1_dbg(regs, esr);
+		el1_brk64(regs, esr);
 		break;
 	case ESR_ELx_EC_FPAC:
 		el1_fpac(regs, esr);
@@ -546,30 +479,32 @@ asmlinkage void noinstr el1h_64_sync_handler(struct pt_regs *regs)
 static __always_inline void __el1_pnmi(struct pt_regs *regs,
 				       void (*handler)(struct pt_regs *))
 {
-	arm64_enter_nmi(regs);
+	irqentry_state_t state;
+
+	state = irqentry_nmi_enter(regs);
 	do_interrupt_handler(regs, handler);
-	arm64_exit_nmi(regs);
+	irqentry_nmi_exit(regs, state);
 }
 
 static __always_inline void __el1_irq(struct pt_regs *regs,
 				      void (*handler)(struct pt_regs *))
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 
 	irq_enter_rcu();
 	do_interrupt_handler(regs, handler);
 	irq_exit_rcu();
 
-	arm64_preempt_schedule_irq();
-
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 static void noinstr el1_interrupt(struct pt_regs *regs,
 				  void (*handler)(struct pt_regs *))
 {
 	write_sysreg(DAIF_PROCCTX_NOIRQ, daif);
 
-	if (IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && !interrupts_enabled(regs))
+	if (IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && regs_irqs_disabled(regs))
 		__el1_pnmi(regs, handler);
 	else
 		__el1_irq(regs, handler);
@@ -588,21 +523,22 @@ asmlinkage void noinstr el1h_64_fiq_handler(struct pt_regs *regs)
 asmlinkage void noinstr el1h_64_error_handler(struct pt_regs *regs)
 {
 	unsigned long esr = read_sysreg(esr_el1);
+	irqentry_state_t state;
 
 	local_daif_restore(DAIF_ERRCTX);
-	arm64_enter_nmi(regs);
+	state = irqentry_nmi_enter(regs);
 	do_serror(regs, esr);
-	arm64_exit_nmi(regs);
+	irqentry_nmi_exit(regs, state);
 }
 
 static void noinstr el0_da(struct pt_regs *regs, unsigned long esr)
 {
 	unsigned long far = read_sysreg(far_el1);
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_mem_abort(far, esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_ia(struct pt_regs *regs, unsigned long esr)
@@ -617,50 +553,50 @@ static void noinstr el0_ia(struct pt_regs *regs, unsigned long esr)
 	if (!is_ttbr0_addr(far))
 		arm64_apply_bp_hardening();
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_mem_abort(far, esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_fpsimd_acc(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_fpsimd_acc(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_sve_acc(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_sve_acc(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_sme_acc(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_sme_acc(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_fpsimd_exc(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_fpsimd_exc(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_sys(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_sys(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_pc(struct pt_regs *regs, unsigned long esr)
@@ -670,87 +606,132 @@ static void noinstr el0_pc(struct pt_regs *regs, unsigned long esr)
 	if (!is_ttbr0_addr(instruction_pointer(regs)))
 		arm64_apply_bp_hardening();
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_sp_pc_abort(far, esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_sp(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_sp_pc_abort(regs->sp, esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_undef(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_undef(regs, esr);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_bti(struct pt_regs *regs)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_bti(regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_mops(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_mops(regs, esr);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_gcs(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_gcs(regs, esr);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_inv(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	bad_el0_sync(regs, 0, esr);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
-static void noinstr el0_dbg(struct pt_regs *regs, unsigned long esr)
+static void noinstr el0_breakpt(struct pt_regs *regs, unsigned long esr)
 {
-	/* Only watchpoints write FAR_EL1, otherwise its UNKNOWN */
+	if (!is_ttbr0_addr(regs->pc))
+		arm64_apply_bp_hardening();
+
+	arm64_enter_from_user_mode(regs);
+	debug_exception_enter(regs);
+	do_breakpoint(esr, regs);
+	debug_exception_exit(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	arm64_exit_to_user_mode(regs);
+}
+
+static void noinstr el0_softstp(struct pt_regs *regs, unsigned long esr)
+{
+	bool step_done;
+
+	if (!is_ttbr0_addr(regs->pc))
+		arm64_apply_bp_hardening();
+
+	arm64_enter_from_user_mode(regs);
+	/*
+	 * After handling a breakpoint, we suspend the breakpoint
+	 * and use single-step to move to the next instruction.
+	 * If we are stepping a suspended breakpoint there's nothing more to do:
+	 * the single-step is complete.
+	 */
+	step_done = try_step_suspended_breakpoints(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	if (!step_done)
+		do_el0_softstep(esr, regs);
+	arm64_exit_to_user_mode(regs);
+}
+
+static void noinstr el0_watchpt(struct pt_regs *regs, unsigned long esr)
+{
+	/* Watchpoints are the only debug exception to write FAR_EL1 */
 	unsigned long far = read_sysreg(far_el1);
 
-	enter_from_user_mode(regs);
-	do_debug_exception(far, esr, regs);
+	arm64_enter_from_user_mode(regs);
+	debug_exception_enter(regs);
+	do_watchpoint(far, esr, regs);
+	debug_exception_exit(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	arm64_exit_to_user_mode(regs);
+}
+
+static void noinstr el0_brk64(struct pt_regs *regs, unsigned long esr)
+{
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
-	exit_to_user_mode(regs);
+	do_el0_brk64(esr, regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_svc(struct pt_regs *regs)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	cortex_a76_erratum_1463225_svc_handler();
-	fp_user_discard();
+	fpsimd_syscall_enter();
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_svc(regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
+	fpsimd_syscall_exit();
 }
 
 static void noinstr el0_fpac(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_fpac(regs, esr);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs)
@@ -802,10 +783,16 @@ asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs)
 		el0_gcs(regs, esr);
 		break;
 	case ESR_ELx_EC_BREAKPT_LOW:
+		el0_breakpt(regs, esr);
+		break;
 	case ESR_ELx_EC_SOFTSTP_LOW:
+		el0_softstp(regs, esr);
+		break;
 	case ESR_ELx_EC_WATCHPT_LOW:
+		el0_watchpt(regs, esr);
+		break;
 	case ESR_ELx_EC_BRK64:
-		el0_dbg(regs, esr);
+		el0_brk64(regs, esr);
 		break;
 	case ESR_ELx_EC_FPAC:
 		el0_fpac(regs, esr);
@@ -818,7 +805,7 @@ asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs)
 static void noinstr el0_interrupt(struct pt_regs *regs,
 				  void (*handler)(struct pt_regs *))
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 
 	write_sysreg(DAIF_PROCCTX_NOIRQ, daif);
 
@@ -829,7 +816,7 @@ static void noinstr el0_interrupt(struct pt_regs *regs,
 	do_interrupt_handler(regs, handler);
 	irq_exit_rcu();
 
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr __el0_irq_handler_common(struct pt_regs *regs)
@@ -855,14 +842,15 @@ asmlinkage void noinstr el0t_64_fiq_handler(struct pt_regs *regs)
 static void noinstr __el0_error_handler_common(struct pt_regs *regs)
 {
 	unsigned long esr = read_sysreg(esr_el1);
+	irqentry_state_t state;
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_ERRCTX);
-	arm64_enter_nmi(regs);
+	state = irqentry_nmi_enter(regs);
 	do_serror(regs, esr);
-	arm64_exit_nmi(regs);
+	irqentry_nmi_exit(regs, state);
 	local_daif_restore(DAIF_PROCCTX);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 asmlinkage void noinstr el0t_64_error_handler(struct pt_regs *regs)
@@ -873,19 +861,27 @@ asmlinkage void noinstr el0t_64_error_handler(struct pt_regs *regs)
 #ifdef CONFIG_COMPAT
 static void noinstr el0_cp15(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_cp15(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_svc_compat(struct pt_regs *regs)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	cortex_a76_erratum_1463225_svc_handler();
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_svc_compat(regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
+}
+
+static void noinstr el0_bkpt32(struct pt_regs *regs, unsigned long esr)
+{
+	arm64_enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_bkpt32(esr, regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 asmlinkage void noinstr el0t_32_sync_handler(struct pt_regs *regs)
@@ -922,10 +918,16 @@ asmlinkage void noinstr el0t_32_sync_handler(struct pt_regs *regs)
 		el0_cp15(regs, esr);
 		break;
 	case ESR_ELx_EC_BREAKPT_LOW:
+		el0_breakpt(regs, esr);
+		break;
 	case ESR_ELx_EC_SOFTSTP_LOW:
+		el0_softstp(regs, esr);
+		break;
 	case ESR_ELx_EC_WATCHPT_LOW:
+		el0_watchpt(regs, esr);
+		break;
 	case ESR_ELx_EC_BKPT32:
-		el0_dbg(regs, esr);
+		el0_bkpt32(regs, esr);
 		break;
 	default:
 		el0_inv(regs, esr);
@@ -953,21 +955,20 @@ UNHANDLED(el0t, 32, fiq)
 UNHANDLED(el0t, 32, error)
 #endif /* CONFIG_COMPAT */
 
-#ifdef CONFIG_VMAP_STACK
 asmlinkage void noinstr __noreturn handle_bad_stack(struct pt_regs *regs)
 {
 	unsigned long esr = read_sysreg(esr_el1);
 	unsigned long far = read_sysreg(far_el1);
 
-	arm64_enter_nmi(regs);
+	irqentry_nmi_enter(regs);
 	panic_bad_stack(regs, esr, far);
 }
-#endif /* CONFIG_VMAP_STACK */
 
 #ifdef CONFIG_ARM_SDE_INTERFACE
 asmlinkage noinstr unsigned long
 __sdei_handler(struct pt_regs *regs, struct sdei_registered_event *arg)
 {
+	irqentry_state_t state;
 	unsigned long ret;
 
 	/*
@@ -992,9 +993,9 @@ __sdei_handler(struct pt_regs *regs, struct sdei_registered_event *arg)
 	else if (cpu_has_pan())
 		set_pstate_pan(0);
 
-	arm64_enter_nmi(regs);
+	state = irqentry_nmi_enter(regs);
 	ret = do_sdei_event(regs, arg);
-	arm64_exit_nmi(regs);
+	irqentry_nmi_exit(regs, state);
 
 	return ret;
 }
diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S
index f0c16640ef21..025140caafe7 100644
--- a/arch/arm64/kernel/entry-ftrace.S
+++ b/arch/arm64/kernel/entry-ftrace.S
@@ -94,7 +94,7 @@ SYM_CODE_START(ftrace_caller)
 	stp	x29, x30, [sp, #FREGS_SIZE]
 	add	x29, sp, #FREGS_SIZE
 
-	/* Prepare arguments for the the tracer func */
+	/* Prepare arguments for the tracer func */
 	sub	x0, x30, #AARCH64_INSN_SIZE		// ip (callsite's BL insn)
 	mov	x1, x9					// parent_ip (callsite's LR)
 	mov	x3, sp					// regs
@@ -329,24 +329,28 @@ SYM_FUNC_END(ftrace_stub_graph)
  * @fp is checked against the value passed by ftrace_graph_caller().
  */
 SYM_CODE_START(return_to_handler)
-	/* save return value regs */
-	sub sp, sp, #FGRET_REGS_SIZE
-	stp x0, x1, [sp, #FGRET_REGS_X0]
-	stp x2, x3, [sp, #FGRET_REGS_X2]
-	stp x4, x5, [sp, #FGRET_REGS_X4]
-	stp x6, x7, [sp, #FGRET_REGS_X6]
-	str x29,    [sp, #FGRET_REGS_FP]	// parent's fp
+	/* Make room for ftrace_regs */
+	sub	sp, sp, #FREGS_SIZE
+
+	/* Save return value regs */
+	stp	x0, x1, [sp, #FREGS_X0]
+	stp	x2, x3, [sp, #FREGS_X2]
+	stp	x4, x5, [sp, #FREGS_X4]
+	stp	x6, x7, [sp, #FREGS_X6]
+
+	/* Save the callsite's FP */
+	str	x29, [sp, #FREGS_FP]
 
 	mov	x0, sp
-	bl	ftrace_return_to_handler	// addr = ftrace_return_to_hander(regs);
+	bl	ftrace_return_to_handler	// addr = ftrace_return_to_hander(fregs);
 	mov	x30, x0				// restore the original return address
 
-	/* restore return value regs */
-	ldp x0, x1, [sp, #FGRET_REGS_X0]
-	ldp x2, x3, [sp, #FGRET_REGS_X2]
-	ldp x4, x5, [sp, #FGRET_REGS_X4]
-	ldp x6, x7, [sp, #FGRET_REGS_X6]
-	add sp, sp, #FGRET_REGS_SIZE
+	/* Restore return value regs */
+	ldp	x0, x1, [sp, #FREGS_X0]
+	ldp	x2, x3, [sp, #FREGS_X2]
+	ldp	x4, x5, [sp, #FREGS_X4]
+	ldp	x6, x7, [sp, #FREGS_X6]
+	add	sp, sp, #FREGS_SIZE
 
 	ret
 SYM_CODE_END(return_to_handler)
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 5ae2a34b50bd..f8018b5c1f9a 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -55,7 +55,6 @@
 	.endif
 
 	sub	sp, sp, #PT_REGS_SIZE
-#ifdef CONFIG_VMAP_STACK
 	/*
 	 * Test whether the SP has overflowed, without corrupting a GPR.
 	 * Task and IRQ stacks are aligned so that SP & (1 << THREAD_SHIFT)
@@ -97,7 +96,6 @@
 	/* We were already on the overflow stack. Restore sp/x0 and carry on. */
 	sub	sp, sp, x0
 	mrs	x0, tpidrro_el0
-#endif
 	b	el\el\ht\()_\regsize\()_\label
 .org .Lventry_start\@ + 128	// Did we overflow the ventry slot?
 	.endm
@@ -540,7 +538,6 @@ SYM_CODE_START(vectors)
 	kernel_ventry	0, t, 32, error		// Error 32-bit EL0
 SYM_CODE_END(vectors)
 
-#ifdef CONFIG_VMAP_STACK
 SYM_CODE_START_LOCAL(__bad_stack)
 	/*
 	 * We detected an overflow in kernel_ventry, which switched to the
@@ -568,7 +565,6 @@ SYM_CODE_START_LOCAL(__bad_stack)
 	bl	handle_bad_stack
 	ASM_BUG()
 SYM_CODE_END(__bad_stack)
-#endif /* CONFIG_VMAP_STACK */
 
 
 	.macro entry_handler el:req, ht:req, regsize:req, label:req
@@ -614,7 +610,7 @@ SYM_CODE_END(ret_to_kernel)
 SYM_CODE_START_LOCAL(ret_to_user)
 	ldr	x19, [tsk, #TSK_TI_FLAGS]	// re-check for single-step
 	enable_step_tsk x19, x2
-#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
+#ifdef CONFIG_KSTACK_ERASE
 	bl	stackleak_erase_on_task_stack
 #endif
 	kernel_exit 0
@@ -825,6 +821,7 @@ SYM_CODE_END(__bp_harden_el1_vectors)
  *
  */
 SYM_FUNC_START(cpu_switch_to)
+	save_and_disable_daif x11
 	mov	x10, #THREAD_CPU_CONTEXT
 	add	x8, x0, x10
 	mov	x9, sp
@@ -848,6 +845,7 @@ SYM_FUNC_START(cpu_switch_to)
 	ptrauth_keys_install_kernel x1, x8, x9, x10
 	scs_save x0
 	scs_load_current
+	restore_irq x11
 	ret
 SYM_FUNC_END(cpu_switch_to)
 NOKPROBE(cpu_switch_to)
@@ -874,6 +872,7 @@ NOKPROBE(ret_from_fork)
  * Calls func(regs) using this CPU's irq stack and shadow irq stack.
  */
 SYM_FUNC_START(call_on_irq_stack)
+	save_and_disable_daif x9
 #ifdef CONFIG_SHADOW_CALL_STACK
 	get_current_task x16
 	scs_save x16
@@ -888,8 +887,10 @@ SYM_FUNC_START(call_on_irq_stack)
 
 	/* Move to the new stack and call the function there */
 	add	sp, x16, #IRQ_STACK_SIZE
+	restore_irq x9
 	blr	x1
 
+	save_and_disable_daif x9
 	/*
 	 * Restore the SP from the FP, and restore the FP and LR from the frame
 	 * record.
@@ -897,6 +898,7 @@ SYM_FUNC_START(call_on_irq_stack)
 	mov	sp, x29
 	ldp	x29, x30, [sp], #16
 	scs_load_current
+	restore_irq x9
 	ret
 SYM_FUNC_END(call_on_irq_stack)
 NOKPROBE(call_on_irq_stack)
@@ -1003,7 +1005,6 @@ SYM_CODE_START(__sdei_asm_handler)
 1:	adr_this_cpu dst=x5, sym=sdei_active_critical_event, tmp=x6
 2:	str	x19, [x5]
 
-#ifdef CONFIG_VMAP_STACK
 	/*
 	 * entry.S may have been using sp as a scratch register, find whether
 	 * this is a normal or critical event and switch to the appropriate
@@ -1016,7 +1017,6 @@ SYM_CODE_START(__sdei_asm_handler)
 2:	mov	x6, #SDEI_STACK_SIZE
 	add	x5, x5, x6
 	mov	sp, x5
-#endif
 
 #ifdef CONFIG_SHADOW_CALL_STACK
 	/* Use a separate shadow call stack for normal and critical events */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 8c4c1a2186cc..c154f72634e0 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -119,7 +119,7 @@
  *   whatever is in the FPSIMD registers is not saved to memory, but discarded.
  */
 
-static DEFINE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
+DEFINE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
 
 __ro_after_init struct vl_info vl_info[ARM64_VEC_MAX] = {
 #ifdef CONFIG_ARM64_SVE
@@ -180,12 +180,12 @@ static inline void set_sve_default_vl(int val)
 	set_default_vl(ARM64_VEC_SVE, val);
 }
 
-static void __percpu *efi_sve_state;
+static u8 *efi_sve_state;
 
 #else /* ! CONFIG_ARM64_SVE */
 
 /* Dummy declaration for code that will be optimised out: */
-extern void __percpu *efi_sve_state;
+extern u8 *efi_sve_state;
 
 #endif /* ! CONFIG_ARM64_SVE */
 
@@ -225,10 +225,21 @@ static void fpsimd_bind_task_to_cpu(void);
  */
 static void get_cpu_fpsimd_context(void)
 {
-	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
-		local_bh_disable();
-	else
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT)) {
+		/*
+		 * The softirq subsystem lacks a true unmask/mask API, and
+		 * re-enabling softirq processing using local_bh_enable() will
+		 * not only unmask softirqs, it will also result in immediate
+		 * delivery of any pending softirqs.
+		 * This is undesirable when running with IRQs disabled, but in
+		 * that case, there is no need to mask softirqs in the first
+		 * place, so only bother doing so when IRQs are enabled.
+		 */
+		if (!irqs_disabled())
+			local_bh_disable();
+	} else {
 		preempt_disable();
+	}
 }
 
 /*
@@ -240,10 +251,12 @@ static void get_cpu_fpsimd_context(void)
  */
 static void put_cpu_fpsimd_context(void)
 {
-	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
-		local_bh_enable();
-	else
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT)) {
+		if (!irqs_disabled())
+			local_bh_enable();
+	} else {
 		preempt_enable();
+	}
 }
 
 unsigned int task_get_vl(const struct task_struct *task, enum vec_type type)
@@ -359,20 +372,15 @@ static void task_fpsimd_load(void)
 	WARN_ON(preemptible());
 	WARN_ON(test_thread_flag(TIF_KERNEL_FPSTATE));
 
-	if (system_supports_fpmr())
-		write_sysreg_s(current->thread.uw.fpmr, SYS_FPMR);
-
 	if (system_supports_sve() || system_supports_sme()) {
 		switch (current->thread.fp_type) {
 		case FP_STATE_FPSIMD:
 			/* Stop tracking SVE for this task until next use. */
-			if (test_and_clear_thread_flag(TIF_SVE))
-				sve_user_disable();
+			clear_thread_flag(TIF_SVE);
 			break;
 		case FP_STATE_SVE:
-			if (!thread_sm_enabled(&current->thread) &&
-			    !WARN_ON_ONCE(!test_and_set_thread_flag(TIF_SVE)))
-				sve_user_enable();
+			if (!thread_sm_enabled(&current->thread))
+				WARN_ON_ONCE(!test_and_set_thread_flag(TIF_SVE));
 
 			if (test_thread_flag(TIF_SVE))
 				sve_set_vq(sve_vq_from_vl(task_get_sve_vl(current)) - 1);
@@ -413,6 +421,9 @@ static void task_fpsimd_load(void)
 			restore_ffr = system_supports_fa64();
 	}
 
+	if (system_supports_fpmr())
+		write_sysreg_s(current->thread.uw.fpmr, SYS_FPMR);
+
 	if (restore_sve_regs) {
 		WARN_ON_ONCE(current->thread.fp_type != FP_STATE_SVE);
 		sve_load_state(sve_pffr(&current->thread),
@@ -453,12 +464,15 @@ static void fpsimd_save_user_state(void)
 		*(last->fpmr) = read_sysreg_s(SYS_FPMR);
 
 	/*
-	 * If a task is in a syscall the ABI allows us to only
-	 * preserve the state shared with FPSIMD so don't bother
-	 * saving the full SVE state in that case.
+	 * Save SVE state if it is live.
+	 *
+	 * The syscall ABI discards live SVE state at syscall entry. When
+	 * entering a syscall, fpsimd_syscall_enter() sets to_save to
+	 * FP_STATE_FPSIMD to allow the SVE state to be lazily discarded until
+	 * either new SVE state is loaded+bound or fpsimd_syscall_exit() is
+	 * called prior to a return to userspace.
 	 */
-	if ((last->to_save == FP_STATE_CURRENT && test_thread_flag(TIF_SVE) &&
-	     !in_syscall(current_pt_regs())) ||
+	if ((last->to_save == FP_STATE_CURRENT && test_thread_flag(TIF_SVE)) ||
 	    last->to_save == FP_STATE_SVE) {
 		save_sve_regs = true;
 		save_ffr = true;
@@ -562,7 +576,7 @@ static int vec_proc_do_default_vl(const struct ctl_table *table, int write,
 	return 0;
 }
 
-static struct ctl_table sve_default_vl_table[] = {
+static const struct ctl_table sve_default_vl_table[] = {
 	{
 		.procname	= "sve_default_vector_length",
 		.mode		= 0644,
@@ -585,7 +599,7 @@ static int __init sve_sysctl_init(void) { return 0; }
 #endif /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */
 
 #if defined(CONFIG_ARM64_SME) && defined(CONFIG_SYSCTL)
-static struct ctl_table sme_default_vl_table[] = {
+static const struct ctl_table sme_default_vl_table[] = {
 	{
 		.procname	= "sme_default_vector_length",
 		.mode		= 0644,
@@ -651,7 +665,7 @@ static void __fpsimd_to_sve(void *sst, struct user_fpsimd_state const *fst,
  * task->thread.uw.fpsimd_state must be up to date before calling this
  * function.
  */
-static void fpsimd_to_sve(struct task_struct *task)
+static inline void fpsimd_to_sve(struct task_struct *task)
 {
 	unsigned int vq;
 	void *sst = task->thread.sve_state;
@@ -675,7 +689,7 @@ static void fpsimd_to_sve(struct task_struct *task)
  * bytes of allocated kernel memory.
  * task->thread.sve_state must be up to date before calling this function.
  */
-static void sve_to_fpsimd(struct task_struct *task)
+static inline void sve_to_fpsimd(struct task_struct *task)
 {
 	unsigned int vq, vl;
 	void const *sst = task->thread.sve_state;
@@ -694,44 +708,39 @@ static void sve_to_fpsimd(struct task_struct *task)
 	}
 }
 
-void cpu_enable_fpmr(const struct arm64_cpu_capabilities *__always_unused p)
+static inline void __fpsimd_zero_vregs(struct user_fpsimd_state *fpsimd)
 {
-	write_sysreg_s(read_sysreg_s(SYS_SCTLR_EL1) | SCTLR_EL1_EnFPM_MASK,
-		       SYS_SCTLR_EL1);
+	memset(&fpsimd->vregs, 0, sizeof(fpsimd->vregs));
 }
 
-#ifdef CONFIG_ARM64_SVE
 /*
- * Call __sve_free() directly only if you know task can't be scheduled
- * or preempted.
+ * Simulate the effects of an SMSTOP SM instruction.
  */
-static void __sve_free(struct task_struct *task)
+void task_smstop_sm(struct task_struct *task)
 {
-	kfree(task->thread.sve_state);
-	task->thread.sve_state = NULL;
-}
+	if (!thread_sm_enabled(&task->thread))
+		return;
 
-static void sve_free(struct task_struct *task)
-{
-	WARN_ON(test_tsk_thread_flag(task, TIF_SVE));
+	__fpsimd_zero_vregs(&task->thread.uw.fpsimd_state);
+	task->thread.uw.fpsimd_state.fpsr = 0x0800009f;
+	if (system_supports_fpmr())
+		task->thread.uw.fpmr = 0;
 
-	__sve_free(task);
+	task->thread.svcr &= ~SVCR_SM_MASK;
+	task->thread.fp_type = FP_STATE_FPSIMD;
 }
 
-/*
- * Return how many bytes of memory are required to store the full SVE
- * state for task, given task's currently configured vector length.
- */
-size_t sve_state_size(struct task_struct const *task)
+void cpu_enable_fpmr(const struct arm64_cpu_capabilities *__always_unused p)
 {
-	unsigned int vl = 0;
-
-	if (system_supports_sve())
-		vl = task_get_sve_vl(task);
-	if (system_supports_sme())
-		vl = max(vl, task_get_sme_vl(task));
+	write_sysreg_s(read_sysreg_s(SYS_SCTLR_EL1) | SCTLR_EL1_EnFPM_MASK,
+		       SYS_SCTLR_EL1);
+}
 
-	return SVE_SIG_REGS_SIZE(sve_vq_from_vl(vl));
+#ifdef CONFIG_ARM64_SVE
+static void sve_free(struct task_struct *task)
+{
+	kfree(task->thread.sve_state);
+	task->thread.sve_state = NULL;
 }
 
 /*
@@ -758,69 +767,34 @@ void sve_alloc(struct task_struct *task, bool flush)
 		kzalloc(sve_state_size(task), GFP_KERNEL);
 }
 
-
 /*
- * Force the FPSIMD state shared with SVE to be updated in the SVE state
- * even if the SVE state is the current active state.
+ * Ensure that task->thread.uw.fpsimd_state is up to date with respect to the
+ * task's currently effective FPSIMD/SVE state.
  *
- * This should only be called by ptrace.  task must be non-runnable.
- * task->thread.sve_state must point to at least sve_state_size(task)
- * bytes of allocated kernel memory.
+ * The task's FPSIMD/SVE/SME state must not be subject to concurrent
+ * manipulation.
  */
-void fpsimd_force_sync_to_sve(struct task_struct *task)
-{
-	fpsimd_to_sve(task);
-}
-
-/*
- * Ensure that task->thread.sve_state is up to date with respect to
- * the user task, irrespective of when SVE is in use or not.
- *
- * This should only be called by ptrace.  task must be non-runnable.
- * task->thread.sve_state must point to at least sve_state_size(task)
- * bytes of allocated kernel memory.
- */
-void fpsimd_sync_to_sve(struct task_struct *task)
-{
-	if (!test_tsk_thread_flag(task, TIF_SVE) &&
-	    !thread_sm_enabled(&task->thread))
-		fpsimd_to_sve(task);
-}
-
-/*
- * Ensure that task->thread.uw.fpsimd_state is up to date with respect to
- * the user task, irrespective of whether SVE is in use or not.
- *
- * This should only be called by ptrace.  task must be non-runnable.
- * task->thread.sve_state must point to at least sve_state_size(task)
- * bytes of allocated kernel memory.
- */
-void sve_sync_to_fpsimd(struct task_struct *task)
+void fpsimd_sync_from_effective_state(struct task_struct *task)
 {
 	if (task->thread.fp_type == FP_STATE_SVE)
 		sve_to_fpsimd(task);
 }
 
 /*
- * Ensure that task->thread.sve_state is up to date with respect to
- * the task->thread.uw.fpsimd_state.
+ * Ensure that the task's currently effective FPSIMD/SVE state is up to date
+ * with respect to task->thread.uw.fpsimd_state, zeroing any effective
+ * non-FPSIMD (S)SVE state.
  *
- * This should only be called by ptrace to merge new FPSIMD register
- * values into a task for which SVE is currently active.
- * task must be non-runnable.
- * task->thread.sve_state must point to at least sve_state_size(task)
- * bytes of allocated kernel memory.
- * task->thread.uw.fpsimd_state must already have been initialised with
- * the new FPSIMD register values to be merged in.
+ * The task's FPSIMD/SVE/SME state must not be subject to concurrent
+ * manipulation.
  */
-void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
+void fpsimd_sync_to_effective_state_zeropad(struct task_struct *task)
 {
 	unsigned int vq;
 	void *sst = task->thread.sve_state;
 	struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state;
 
-	if (!test_tsk_thread_flag(task, TIF_SVE) &&
-	    !thread_sm_enabled(&task->thread))
+	if (task->thread.fp_type != FP_STATE_SVE)
 		return;
 
 	vq = sve_vq_from_vl(thread_get_cur_vl(&task->thread));
@@ -829,10 +803,73 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
 	__fpsimd_to_sve(sst, fst, vq);
 }
 
+static int change_live_vector_length(struct task_struct *task,
+				     enum vec_type type,
+				     unsigned long vl)
+{
+	unsigned int sve_vl = task_get_sve_vl(task);
+	unsigned int sme_vl = task_get_sme_vl(task);
+	void *sve_state = NULL, *sme_state = NULL;
+
+	if (type == ARM64_VEC_SME)
+		sme_vl = vl;
+	else
+		sve_vl = vl;
+
+	/*
+	 * Allocate the new sve_state and sme_state before freeing the old
+	 * copies so that allocation failure can be handled without needing to
+	 * mutate the task's state in any way.
+	 *
+	 * Changes to the SVE vector length must not discard live ZA state or
+	 * clear PSTATE.ZA, as userspace code which is unaware of the AAPCS64
+	 * ZA lazy saving scheme may attempt to change the SVE vector length
+	 * while unsaved/dormant ZA state exists.
+	 */
+	sve_state = kzalloc(__sve_state_size(sve_vl, sme_vl), GFP_KERNEL);
+	if (!sve_state)
+		goto out_mem;
+
+	if (type == ARM64_VEC_SME) {
+		sme_state = kzalloc(__sme_state_size(sme_vl), GFP_KERNEL);
+		if (!sme_state)
+			goto out_mem;
+	}
+
+	if (task == current)
+		fpsimd_save_and_flush_current_state();
+	else
+		fpsimd_flush_task_state(task);
+
+	/*
+	 * Always preserve PSTATE.SM and the effective FPSIMD state, zeroing
+	 * other SVE state.
+	 */
+	fpsimd_sync_from_effective_state(task);
+	task_set_vl(task, type, vl);
+	kfree(task->thread.sve_state);
+	task->thread.sve_state = sve_state;
+	fpsimd_sync_to_effective_state_zeropad(task);
+
+	if (type == ARM64_VEC_SME) {
+		task->thread.svcr &= ~SVCR_ZA_MASK;
+		kfree(task->thread.sme_state);
+		task->thread.sme_state = sme_state;
+	}
+
+	return 0;
+
+out_mem:
+	kfree(sve_state);
+	kfree(sme_state);
+	return -ENOMEM;
+}
+
 int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 			  unsigned long vl, unsigned long flags)
 {
-	bool free_sme = false;
+	bool onexec = flags & PR_SVE_SET_VL_ONEXEC;
+	bool inherit = flags & PR_SVE_VL_INHERIT;
 
 	if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT |
 				     PR_SVE_SET_VL_ONEXEC))
@@ -852,71 +889,17 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 
 	vl = find_supported_vector_length(type, vl);
 
-	if (flags & (PR_SVE_VL_INHERIT |
-		     PR_SVE_SET_VL_ONEXEC))
+	if (!onexec && vl != task_get_vl(task, type)) {
+		if (change_live_vector_length(task, type, vl))
+			return -ENOMEM;
+	}
+
+	if (onexec || inherit)
 		task_set_vl_onexec(task, type, vl);
 	else
 		/* Reset VL to system default on next exec: */
 		task_set_vl_onexec(task, type, 0);
 
-	/* Only actually set the VL if not deferred: */
-	if (flags & PR_SVE_SET_VL_ONEXEC)
-		goto out;
-
-	if (vl == task_get_vl(task, type))
-		goto out;
-
-	/*
-	 * To ensure the FPSIMD bits of the SVE vector registers are preserved,
-	 * write any live register state back to task_struct, and convert to a
-	 * regular FPSIMD thread.
-	 */
-	if (task == current) {
-		get_cpu_fpsimd_context();
-
-		fpsimd_save_user_state();
-	}
-
-	fpsimd_flush_task_state(task);
-	if (test_and_clear_tsk_thread_flag(task, TIF_SVE) ||
-	    thread_sm_enabled(&task->thread)) {
-		sve_to_fpsimd(task);
-		task->thread.fp_type = FP_STATE_FPSIMD;
-	}
-
-	if (system_supports_sme()) {
-		if (type == ARM64_VEC_SME ||
-		    !(task->thread.svcr & (SVCR_SM_MASK | SVCR_ZA_MASK))) {
-			/*
-			 * We are changing the SME VL or weren't using
-			 * SME anyway, discard the state and force a
-			 * reallocation.
-			 */
-			task->thread.svcr &= ~(SVCR_SM_MASK |
-					       SVCR_ZA_MASK);
-			clear_tsk_thread_flag(task, TIF_SME);
-			free_sme = true;
-		}
-	}
-
-	if (task == current)
-		put_cpu_fpsimd_context();
-
-	task_set_vl(task, type, vl);
-
-	/*
-	 * Free the changed states if they are not in use, SME will be
-	 * reallocated to the correct size on next use and we just
-	 * allocate SVE now in case it is needed for use in streaming
-	 * mode.
-	 */
-	sve_free(task);
-	sve_alloc(task, true);
-
-	if (free_sme)
-		sme_free(task);
-
-out:
 	update_tsk_thread_flag(task, vec_vl_inherit_flag(type),
 			       flags & PR_SVE_VL_INHERIT);
 
@@ -1131,15 +1114,15 @@ static void __init sve_efi_setup(void)
 	if (!sve_vl_valid(max_vl))
 		goto fail;
 
-	efi_sve_state = __alloc_percpu(
-		SVE_SIG_REGS_SIZE(sve_vq_from_vl(max_vl)), SVE_VQ_BYTES);
+	efi_sve_state = kmalloc(SVE_SIG_REGS_SIZE(sve_vq_from_vl(max_vl)),
+				GFP_KERNEL);
 	if (!efi_sve_state)
 		goto fail;
 
 	return;
 
 fail:
-	panic("Cannot allocate percpu memory for EFI SVE save/restore");
+	panic("Cannot allocate memory for EFI SVE save/restore");
 }
 
 void cpu_enable_sve(const struct arm64_cpu_capabilities *__always_unused p)
@@ -1212,7 +1195,7 @@ void __init sve_setup(void)
  */
 void fpsimd_release_task(struct task_struct *dead_task)
 {
-	__sve_free(dead_task);
+	sve_free(dead_task);
 	sme_free(dead_task);
 }
 
@@ -1295,6 +1278,8 @@ void __init sme_setup(void)
 	if (!system_supports_sme())
 		return;
 
+	min_bit = find_last_bit(info->vq_map, SVE_VQ_MAX);
+
 	/*
 	 * SME doesn't require any particular vector length be
 	 * supported but it does require at least one.  We should have
@@ -1302,9 +1287,8 @@ void __init sme_setup(void)
 	 * let's double check here.  The bitmap is SVE_VQ_MAP sized for
 	 * sharing with SVE.
 	 */
-	WARN_ON(bitmap_empty(info->vq_map, SVE_VQ_MAX));
+	WARN_ON(min_bit >= SVE_VQ_MAX);
 
-	min_bit = find_last_bit(info->vq_map, SVE_VQ_MAX);
 	info->min_vl = sve_vl_from_vq(__bit_to_vq(min_bit));
 
 	max_bit = find_first_bit(info->vq_map, SVE_VQ_MAX);
@@ -1436,7 +1420,7 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)
 	 * If this not a trap due to SME being disabled then something
 	 * is being used in the wrong mode, report as SIGILL.
 	 */
-	if (ESR_ELx_ISS(esr) != ESR_ELx_SME_ISS_SME_DISABLED) {
+	if (ESR_ELx_SME_ISS_SMTC(esr) != ESR_ELx_SME_ISS_SMTC_SME_DISABLED) {
 		force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
 		return;
 	}
@@ -1460,6 +1444,8 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)
 		sme_set_vq(vq_minus_one);
 
 		fpsimd_bind_task_to_cpu();
+	} else {
+		fpsimd_flush_task_state(current);
 	}
 
 	put_cpu_fpsimd_context();
@@ -1516,21 +1502,23 @@ static void fpsimd_load_kernel_state(struct task_struct *task)
 	 * Elide the load if this CPU holds the most recent kernel mode
 	 * FPSIMD context of the current task.
 	 */
-	if (last->st == &task->thread.kernel_fpsimd_state &&
+	if (last->st == task->thread.kernel_fpsimd_state &&
 	    task->thread.kernel_fpsimd_cpu == smp_processor_id())
 		return;
 
-	fpsimd_load_state(&task->thread.kernel_fpsimd_state);
+	fpsimd_load_state(task->thread.kernel_fpsimd_state);
 }
 
 static void fpsimd_save_kernel_state(struct task_struct *task)
 {
 	struct cpu_fp_state cpu_fp_state = {
-		.st		= &task->thread.kernel_fpsimd_state,
+		.st		= task->thread.kernel_fpsimd_state,
 		.to_save	= FP_STATE_FPSIMD,
 	};
 
-	fpsimd_save_state(&task->thread.kernel_fpsimd_state);
+	BUG_ON(!cpu_fp_state.st);
+
+	fpsimd_save_state(task->thread.kernel_fpsimd_state);
 	fpsimd_bind_state_to_cpu(&cpu_fp_state);
 
 	task->thread.kernel_fpsimd_cpu = smp_processor_id();
@@ -1573,8 +1561,8 @@ void fpsimd_thread_switch(struct task_struct *next)
 		fpsimd_save_user_state();
 
 	if (test_tsk_thread_flag(next, TIF_KERNEL_FPSTATE)) {
-		fpsimd_load_kernel_state(next);
 		fpsimd_flush_cpu_state();
+		fpsimd_load_kernel_state(next);
 	} else {
 		/*
 		 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
@@ -1661,6 +1649,9 @@ void fpsimd_flush_thread(void)
 		current->thread.svcr = 0;
 	}
 
+	if (system_supports_fpmr())
+		current->thread.uw.fpmr = 0;
+
 	current->thread.fp_type = FP_STATE_FPSIMD;
 
 	put_cpu_fpsimd_context();
@@ -1683,43 +1674,6 @@ void fpsimd_preserve_current_state(void)
 }
 
 /*
- * Like fpsimd_preserve_current_state(), but ensure that
- * current->thread.uw.fpsimd_state is updated so that it can be copied to
- * the signal frame.
- */
-void fpsimd_signal_preserve_current_state(void)
-{
-	fpsimd_preserve_current_state();
-	if (current->thread.fp_type == FP_STATE_SVE)
-		sve_to_fpsimd(current);
-}
-
-/*
- * Called by KVM when entering the guest.
- */
-void fpsimd_kvm_prepare(void)
-{
-	if (!system_supports_sve())
-		return;
-
-	/*
-	 * KVM does not save host SVE state since we can only enter
-	 * the guest from a syscall so the ABI means that only the
-	 * non-saved SVE state needs to be saved.  If we have left
-	 * SVE enabled for performance reasons then update the task
-	 * state to be FPSIMD only.
-	 */
-	get_cpu_fpsimd_context();
-
-	if (test_and_clear_thread_flag(TIF_SVE)) {
-		sve_to_fpsimd(current);
-		current->thread.fp_type = FP_STATE_FPSIMD;
-	}
-
-	put_cpu_fpsimd_context();
-}
-
-/*
  * Associate current's FPSIMD context with this cpu
  * The caller must have ownership of the cpu FPSIMD context before calling
  * this function.
@@ -1811,30 +1765,14 @@ void fpsimd_restore_current_state(void)
 	put_cpu_fpsimd_context();
 }
 
-/*
- * Load an updated userland FPSIMD state for 'current' from memory and set the
- * flag that indicates that the FPSIMD register contents are the most recent
- * FPSIMD state of 'current'. This is used by the signal code to restore the
- * register state when returning from a signal handler in FPSIMD only cases,
- * any SVE context will be discarded.
- */
 void fpsimd_update_current_state(struct user_fpsimd_state const *state)
 {
 	if (WARN_ON(!system_supports_fpsimd()))
 		return;
 
-	get_cpu_fpsimd_context();
-
 	current->thread.uw.fpsimd_state = *state;
-	if (test_thread_flag(TIF_SVE))
+	if (current->thread.fp_type == FP_STATE_SVE)
 		fpsimd_to_sve(current);
-
-	task_fpsimd_load();
-	fpsimd_bind_task_to_cpu();
-
-	clear_thread_flag(TIF_FOREIGN_FPSTATE);
-
-	put_cpu_fpsimd_context();
 }
 
 /*
@@ -1851,6 +1789,7 @@ void fpsimd_update_current_state(struct user_fpsimd_state const *state)
 void fpsimd_flush_task_state(struct task_struct *t)
 {
 	t->thread.fpsimd_cpu = NR_CPUS;
+	t->thread.kernel_fpsimd_state = NULL;
 	/*
 	 * If we don't support fpsimd, bail out after we have
 	 * reset the fpsimd_cpu for this task and clear the
@@ -1864,6 +1803,17 @@ void fpsimd_flush_task_state(struct task_struct *t)
 	barrier();
 }
 
+void fpsimd_save_and_flush_current_state(void)
+{
+	if (!system_supports_fpsimd())
+		return;
+
+	get_cpu_fpsimd_context();
+	fpsimd_save_user_state();
+	fpsimd_flush_task_state(current);
+	put_cpu_fpsimd_context();
+}
+
 /*
  * Save the FPSIMD state to memory and invalidate cpu view.
  * This function must be called with preemption disabled.
@@ -1899,12 +1849,19 @@ void fpsimd_save_and_flush_cpu_state(void)
  *
  * The caller may freely use the FPSIMD registers until kernel_neon_end() is
  * called.
+ *
+ * Unless called from non-preemptible task context, @state must point to a
+ * caller provided buffer that will be used to preserve the task's kernel mode
+ * FPSIMD context when it is scheduled out, or if it is interrupted by kernel
+ * mode FPSIMD occurring in softirq context. May be %NULL otherwise.
  */
-void kernel_neon_begin(void)
+void kernel_neon_begin(struct user_fpsimd_state *state)
 {
 	if (WARN_ON(!system_supports_fpsimd()))
 		return;
 
+	WARN_ON((preemptible() || in_serving_softirq()) && !state);
+
 	BUG_ON(!may_use_simd());
 
 	get_cpu_fpsimd_context();
@@ -1912,7 +1869,7 @@ void kernel_neon_begin(void)
 	/* Save unsaved fpsimd state, if any: */
 	if (test_thread_flag(TIF_KERNEL_FPSTATE)) {
 		BUG_ON(IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq());
-		fpsimd_save_kernel_state(current);
+		fpsimd_save_state(state);
 	} else {
 		fpsimd_save_user_state();
 
@@ -1933,8 +1890,16 @@ void kernel_neon_begin(void)
 		 * mode in task context. So in this case, setting the flag here
 		 * is always appropriate.
 		 */
-		if (IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq())
+		if (IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq()) {
+			/*
+			 * Record the caller provided buffer as the kernel mode
+			 * FP/SIMD buffer for this task, so that the state can
+			 * be preserved and restored on a context switch.
+			 */
+			WARN_ON(current->thread.kernel_fpsimd_state != NULL);
+			current->thread.kernel_fpsimd_state = state;
 			set_thread_flag(TIF_KERNEL_FPSTATE);
+		}
 	}
 
 	/* Invalidate any task state remaining in the fpsimd regs: */
@@ -1952,31 +1917,39 @@ EXPORT_SYMBOL_GPL(kernel_neon_begin);
  *
  * The caller must not use the FPSIMD registers after this function is called,
  * unless kernel_neon_begin() is called again in the meantime.
+ *
+ * The value of @state must match the value passed to the preceding call to
+ * kernel_neon_begin().
  */
-void kernel_neon_end(void)
+void kernel_neon_end(struct user_fpsimd_state *state)
 {
 	if (!system_supports_fpsimd())
 		return;
 
+	if (!test_thread_flag(TIF_KERNEL_FPSTATE))
+		return;
+
 	/*
 	 * If we are returning from a nested use of kernel mode FPSIMD, restore
 	 * the task context kernel mode FPSIMD state. This can only happen when
 	 * running in softirq context on non-PREEMPT_RT.
 	 */
-	if (!IS_ENABLED(CONFIG_PREEMPT_RT) && in_serving_softirq() &&
-	    test_thread_flag(TIF_KERNEL_FPSTATE))
-		fpsimd_load_kernel_state(current);
-	else
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT) && in_serving_softirq()) {
+		fpsimd_load_state(state);
+	} else {
 		clear_thread_flag(TIF_KERNEL_FPSTATE);
+		WARN_ON(current->thread.kernel_fpsimd_state != state);
+		current->thread.kernel_fpsimd_state = NULL;
+	}
 }
 EXPORT_SYMBOL_GPL(kernel_neon_end);
 
 #ifdef CONFIG_EFI
 
-static DEFINE_PER_CPU(struct user_fpsimd_state, efi_fpsimd_state);
-static DEFINE_PER_CPU(bool, efi_fpsimd_state_used);
-static DEFINE_PER_CPU(bool, efi_sve_state_used);
-static DEFINE_PER_CPU(bool, efi_sm_state);
+static struct user_fpsimd_state efi_fpsimd_state;
+static bool efi_fpsimd_state_used;
+static bool efi_sve_state_used;
+static bool efi_sm_state;
 
 /*
  * EFI runtime services support functions
@@ -2000,27 +1973,25 @@ void __efi_fpsimd_begin(void)
 	if (!system_supports_fpsimd())
 		return;
 
-	WARN_ON(preemptible());
-
 	if (may_use_simd()) {
-		kernel_neon_begin();
+		kernel_neon_begin(&efi_fpsimd_state);
 	} else {
+		WARN_ON(preemptible());
+
 		/*
 		 * If !efi_sve_state, SVE can't be in use yet and doesn't need
 		 * preserving:
 		 */
-		if (system_supports_sve() && likely(efi_sve_state)) {
-			char *sve_state = this_cpu_ptr(efi_sve_state);
+		if (system_supports_sve() && efi_sve_state != NULL) {
 			bool ffr = true;
 			u64 svcr;
 
-			__this_cpu_write(efi_sve_state_used, true);
+			efi_sve_state_used = true;
 
 			if (system_supports_sme()) {
 				svcr = read_sysreg_s(SYS_SVCR);
 
-				__this_cpu_write(efi_sm_state,
-						 svcr & SVCR_SM_MASK);
+				efi_sm_state = svcr & SVCR_SM_MASK;
 
 				/*
 				 * Unless we have FA64 FFR does not
@@ -2030,19 +2001,18 @@ void __efi_fpsimd_begin(void)
 					ffr = !(svcr & SVCR_SM_MASK);
 			}
 
-			sve_save_state(sve_state + sve_ffr_offset(sve_max_vl()),
-				       &this_cpu_ptr(&efi_fpsimd_state)->fpsr,
-				       ffr);
+			sve_save_state(efi_sve_state + sve_ffr_offset(sve_max_vl()),
+				       &efi_fpsimd_state.fpsr, ffr);
 
 			if (system_supports_sme())
 				sysreg_clear_set_s(SYS_SVCR,
 						   SVCR_SM_MASK, 0);
 
 		} else {
-			fpsimd_save_state(this_cpu_ptr(&efi_fpsimd_state));
+			fpsimd_save_state(&efi_fpsimd_state);
 		}
 
-		__this_cpu_write(efi_fpsimd_state_used, true);
+		efi_fpsimd_state_used = true;
 	}
 }
 
@@ -2054,12 +2024,10 @@ void __efi_fpsimd_end(void)
 	if (!system_supports_fpsimd())
 		return;
 
-	if (!__this_cpu_xchg(efi_fpsimd_state_used, false)) {
-		kernel_neon_end();
+	if (!efi_fpsimd_state_used) {
+		kernel_neon_end(&efi_fpsimd_state);
 	} else {
-		if (system_supports_sve() &&
-		    likely(__this_cpu_read(efi_sve_state_used))) {
-			char const *sve_state = this_cpu_ptr(efi_sve_state);
+		if (system_supports_sve() && efi_sve_state_used) {
 			bool ffr = true;
 
 			/*
@@ -2068,7 +2036,7 @@ void __efi_fpsimd_end(void)
 			 * streaming mode.
 			 */
 			if (system_supports_sme()) {
-				if (__this_cpu_read(efi_sm_state)) {
+				if (efi_sm_state) {
 					sysreg_clear_set_s(SYS_SVCR,
 							   0,
 							   SVCR_SM_MASK);
@@ -2082,14 +2050,15 @@ void __efi_fpsimd_end(void)
 				}
 			}
 
-			sve_load_state(sve_state + sve_ffr_offset(sve_max_vl()),
-				       &this_cpu_ptr(&efi_fpsimd_state)->fpsr,
-				       ffr);
+			sve_load_state(efi_sve_state + sve_ffr_offset(sve_max_vl()),
+				       &efi_fpsimd_state.fpsr, ffr);
 
-			__this_cpu_write(efi_sve_state_used, false);
+			efi_sve_state_used = false;
 		} else {
-			fpsimd_load_state(this_cpu_ptr(&efi_fpsimd_state));
+			fpsimd_load_state(&efi_fpsimd_state);
 		}
+
+		efi_fpsimd_state_used = false;
 	}
 }
 
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index 245cb419ca24..5a1554a44162 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -143,6 +143,69 @@ unsigned long ftrace_call_adjust(unsigned long addr)
 	return addr;
 }
 
+/* Convert fentry_ip to the symbol address without kallsyms */
+unsigned long arch_ftrace_get_symaddr(unsigned long fentry_ip)
+{
+	u32 insn;
+
+	/*
+	 * When using patchable-function-entry without pre-function NOPS, ftrace
+	 * entry is the address of the first NOP after the function entry point.
+	 *
+	 * The compiler has either generated:
+	 *
+	 * func+00:	func:	NOP		// To be patched to MOV X9, LR
+	 * func+04:		NOP		// To be patched to BL <caller>
+	 *
+	 * Or:
+	 *
+	 * func-04:		BTI	C
+	 * func+00:	func:	NOP		// To be patched to MOV X9, LR
+	 * func+04:		NOP		// To be patched to BL <caller>
+	 *
+	 * The fentry_ip is the address of `BL <caller>` which is at `func + 4`
+	 * bytes in either case.
+	 */
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS))
+		return fentry_ip - AARCH64_INSN_SIZE;
+
+	/*
+	 * When using patchable-function-entry with pre-function NOPs, BTI is
+	 * a bit different.
+	 *
+	 * func+00:	func:	NOP		// To be patched to MOV X9, LR
+	 * func+04:		NOP		// To be patched to BL <caller>
+	 *
+	 * Or:
+	 *
+	 * func+00:	func:	BTI	C
+	 * func+04:		NOP		// To be patched to MOV X9, LR
+	 * func+08:		NOP		// To be patched to BL <caller>
+	 *
+	 * The fentry_ip is the address of `BL <caller>` which is at either
+	 * `func + 4` or `func + 8` depends on whether there is a BTI.
+	 */
+
+	/* If there is no BTI, the func address should be one instruction before. */
+	if (!IS_ENABLED(CONFIG_ARM64_BTI_KERNEL))
+		return fentry_ip - AARCH64_INSN_SIZE;
+
+	/* We want to be extra safe in case entry ip is on the page edge,
+	 * but otherwise we need to avoid get_kernel_nofault()'s overhead.
+	 */
+	if ((fentry_ip & ~PAGE_MASK) < AARCH64_INSN_SIZE * 2) {
+		if (get_kernel_nofault(insn, (u32 *)(fentry_ip - AARCH64_INSN_SIZE * 2)))
+			return 0;
+	} else {
+		insn = *(u32 *)(fentry_ip - AARCH64_INSN_SIZE * 2);
+	}
+
+	if (aarch64_insn_is_bti(le32_to_cpu((__le32)insn)))
+		return fentry_ip - AARCH64_INSN_SIZE * 2;
+
+	return fentry_ip - AARCH64_INSN_SIZE;
+}
+
 /*
  * Replace a single instruction, which may be a branch or NOP.
  * If @validate == true, a replaced instruction is checked against 'old'.
@@ -195,10 +258,17 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	return ftrace_modify_code(pc, 0, new, false);
 }
 
-static struct plt_entry *get_ftrace_plt(struct module *mod)
+static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr)
 {
 #ifdef CONFIG_MODULES
-	struct plt_entry *plt = mod->arch.ftrace_trampolines;
+	struct plt_entry *plt = NULL;
+
+	if (within_module_mem_type(addr, mod, MOD_INIT_TEXT))
+		plt = mod->arch.init_ftrace_trampolines;
+	else if (within_module_mem_type(addr, mod, MOD_TEXT))
+		plt = mod->arch.ftrace_trampolines;
+	else
+		return NULL;
 
 	return &plt[FTRACE_PLT_IDX];
 #else
@@ -257,20 +327,19 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec,
 	 * dealing with an out-of-range condition, we can assume it
 	 * is due to a module being loaded far away from the kernel.
 	 *
-	 * NOTE: __module_text_address() must be called with preemption
-	 * disabled, but we can rely on ftrace_lock to ensure that 'mod'
+	 * NOTE: __module_text_address() must be called within a RCU read
+	 * section, but we can rely on ftrace_lock to ensure that 'mod'
 	 * retains its validity throughout the remainder of this code.
 	 */
 	if (!mod) {
-		preempt_disable();
+		guard(rcu)();
 		mod = __module_text_address(pc);
-		preempt_enable();
 	}
 
 	if (WARN_ON(!mod))
 		return false;
 
-	plt = get_ftrace_plt(mod);
+	plt = get_ftrace_plt(mod, pc);
 	if (!plt) {
 		pr_err("ftrace: no module PLT for %ps\n", (void *)*addr);
 		return false;
@@ -423,7 +492,7 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 		return ret;
 
 	/*
-	 * When using mcount, callsites in modules may have been initalized to
+	 * When using mcount, callsites in modules may have been initialized to
 	 * call an arbitrary module PLT (which redirects to the _mcount stub)
 	 * rather than the ftrace PLT we'll use at runtime (which redirects to
 	 * the ftrace trampoline). We can ignore the old PLT when initializing
@@ -481,7 +550,20 @@ void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
 void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
 		       struct ftrace_ops *op, struct ftrace_regs *fregs)
 {
-	prepare_ftrace_return(ip, &arch_ftrace_regs(fregs)->lr, arch_ftrace_regs(fregs)->fp);
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+	unsigned long frame_pointer = arch_ftrace_regs(fregs)->fp;
+	unsigned long *parent = &arch_ftrace_regs(fregs)->lr;
+	unsigned long old;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	old = *parent;
+
+	if (!function_graph_enter_regs(old, ip, frame_pointer,
+				       (void *)frame_pointer, fregs)) {
+		*parent = return_hooker;
+	}
 }
 #else
 /*
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 5ab1970ee543..ca04b338cb0d 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -89,7 +89,7 @@ SYM_CODE_START(primary_entry)
 	adrp	x1, early_init_stack
 	mov	sp, x1
 	mov	x29, xzr
-	adrp	x0, init_idmap_pg_dir
+	adrp	x0, __pi_init_idmap_pg_dir
 	mov	x1, xzr
 	bl	__pi_create_init_idmap
 
@@ -101,7 +101,7 @@ SYM_CODE_START(primary_entry)
 	cbnz	x19, 0f
 	dmb     sy
 	mov	x1, x0				// end of used region
-	adrp    x0, init_idmap_pg_dir
+	adrp    x0, __pi_init_idmap_pg_dir
 	adr_l	x2, dcache_inval_poc
 	blr	x2
 	b	1f
@@ -298,25 +298,8 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
 	msr	sctlr_el2, x0
 	isb
 0:
-	mov_q	x0, HCR_HOST_NVHE_FLAGS
-
-	/*
-	 * Compliant CPUs advertise their VHE-onlyness with
-	 * ID_AA64MMFR4_EL1.E2H0 < 0. HCR_EL2.E2H can be
-	 * RES1 in that case. Publish the E2H bit early so that
-	 * it can be picked up by the init_el2_state macro.
-	 *
-	 * Fruity CPUs seem to have HCR_EL2.E2H set to RAO/WI, but
-	 * don't advertise it (they predate this relaxation).
-	 */
-	mrs_s	x1, SYS_ID_AA64MMFR4_EL1
-	tbz	x1, #(ID_AA64MMFR4_EL1_E2H0_SHIFT + ID_AA64MMFR4_EL1_E2H0_WIDTH - 1), 1f
-
-	orr	x0, x0, #HCR_E2H
-1:
-	msr	hcr_el2, x0
-	isb
 
+	init_el2_hcr	HCR_HOST_NVHE_FLAGS
 	init_el2_state
 
 	/* Hypervisor stub */
@@ -339,7 +322,8 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
 	msr	sctlr_el1, x1
 	mov	x2, xzr
 3:
-	__init_el2_nvhe_prepare_eret
+	mov	x0, #INIT_PSTATE_EL1
+	msr	spsr_el2, x0
 
 	mov	w0, #BOOT_CPU_MODE_EL2
 	orr	x0, x0, x2
@@ -523,7 +507,7 @@ SYM_FUNC_END(__no_granule_support)
 
 SYM_FUNC_START_LOCAL(__primary_switch)
 	adrp	x1, reserved_pg_dir
-	adrp	x2, init_idmap_pg_dir
+	adrp	x2, __pi_init_idmap_pg_dir
 	bl	__enable_mmu
 
 	adrp	x1, early_init_stack
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
index 722ac45f9f7b..ab76b36dce82 100644
--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -22,6 +22,7 @@
 #include <asm/current.h>
 #include <asm/debug-monitors.h>
 #include <asm/esr.h>
+#include <asm/exception.h>
 #include <asm/hw_breakpoint.h>
 #include <asm/traps.h>
 #include <asm/cputype.h>
@@ -618,8 +619,7 @@ NOKPROBE_SYMBOL(toggle_bp_registers);
 /*
  * Debug exception handlers.
  */
-static int breakpoint_handler(unsigned long unused, unsigned long esr,
-			      struct pt_regs *regs)
+void do_breakpoint(unsigned long esr, struct pt_regs *regs)
 {
 	int i, step = 0, *kernel_step;
 	u32 ctrl_reg;
@@ -662,7 +662,7 @@ unlock:
 	}
 
 	if (!step)
-		return 0;
+		return;
 
 	if (user_mode(regs)) {
 		debug_info->bps_disabled = 1;
@@ -670,7 +670,7 @@ unlock:
 
 		/* If we're already stepping a watchpoint, just return. */
 		if (debug_info->wps_disabled)
-			return 0;
+			return;
 
 		if (test_thread_flag(TIF_SINGLESTEP))
 			debug_info->suspended_step = 1;
@@ -681,7 +681,7 @@ unlock:
 		kernel_step = this_cpu_ptr(&stepping_kernel_bp);
 
 		if (*kernel_step != ARM_KERNEL_STEP_NONE)
-			return 0;
+			return;
 
 		if (kernel_active_single_step()) {
 			*kernel_step = ARM_KERNEL_STEP_SUSPEND;
@@ -690,10 +690,8 @@ unlock:
 			kernel_enable_single_step(regs);
 		}
 	}
-
-	return 0;
 }
-NOKPROBE_SYMBOL(breakpoint_handler);
+NOKPROBE_SYMBOL(do_breakpoint);
 
 /*
  * Arm64 hardware does not always report a watchpoint hit address that matches
@@ -752,8 +750,7 @@ static int watchpoint_report(struct perf_event *wp, unsigned long addr,
 	return step;
 }
 
-static int watchpoint_handler(unsigned long addr, unsigned long esr,
-			      struct pt_regs *regs)
+void do_watchpoint(unsigned long addr, unsigned long esr, struct pt_regs *regs)
 {
 	int i, step = 0, *kernel_step, access, closest_match = 0;
 	u64 min_dist = -1, dist;
@@ -808,7 +805,7 @@ static int watchpoint_handler(unsigned long addr, unsigned long esr,
 	rcu_read_unlock();
 
 	if (!step)
-		return 0;
+		return;
 
 	/*
 	 * We always disable EL0 watchpoints because the kernel can
@@ -821,7 +818,7 @@ static int watchpoint_handler(unsigned long addr, unsigned long esr,
 
 		/* If we're already stepping a breakpoint, just return. */
 		if (debug_info->bps_disabled)
-			return 0;
+			return;
 
 		if (test_thread_flag(TIF_SINGLESTEP))
 			debug_info->suspended_step = 1;
@@ -832,7 +829,7 @@ static int watchpoint_handler(unsigned long addr, unsigned long esr,
 		kernel_step = this_cpu_ptr(&stepping_kernel_bp);
 
 		if (*kernel_step != ARM_KERNEL_STEP_NONE)
-			return 0;
+			return;
 
 		if (kernel_active_single_step()) {
 			*kernel_step = ARM_KERNEL_STEP_SUSPEND;
@@ -841,44 +838,41 @@ static int watchpoint_handler(unsigned long addr, unsigned long esr,
 			kernel_enable_single_step(regs);
 		}
 	}
-
-	return 0;
 }
-NOKPROBE_SYMBOL(watchpoint_handler);
+NOKPROBE_SYMBOL(do_watchpoint);
 
 /*
  * Handle single-step exception.
  */
-int reinstall_suspended_bps(struct pt_regs *regs)
+bool try_step_suspended_breakpoints(struct pt_regs *regs)
 {
 	struct debug_info *debug_info = &current->thread.debug;
-	int handled_exception = 0, *kernel_step;
-
-	kernel_step = this_cpu_ptr(&stepping_kernel_bp);
+	int *kernel_step = this_cpu_ptr(&stepping_kernel_bp);
+	bool handled_exception = false;
 
 	/*
-	 * Called from single-step exception handler.
-	 * Return 0 if execution can resume, 1 if a SIGTRAP should be
-	 * reported.
+	 * Called from single-step exception entry.
+	 * Return true if we stepped a breakpoint and can resume execution,
+	 * false if we need to handle a single-step.
 	 */
 	if (user_mode(regs)) {
 		if (debug_info->bps_disabled) {
 			debug_info->bps_disabled = 0;
 			toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL0, 1);
-			handled_exception = 1;
+			handled_exception = true;
 		}
 
 		if (debug_info->wps_disabled) {
 			debug_info->wps_disabled = 0;
 			toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 1);
-			handled_exception = 1;
+			handled_exception = true;
 		}
 
 		if (handled_exception) {
 			if (debug_info->suspended_step) {
 				debug_info->suspended_step = 0;
 				/* Allow exception handling to fall-through. */
-				handled_exception = 0;
+				handled_exception = false;
 			} else {
 				user_disable_single_step(current);
 			}
@@ -892,17 +886,17 @@ int reinstall_suspended_bps(struct pt_regs *regs)
 
 		if (*kernel_step != ARM_KERNEL_STEP_SUSPEND) {
 			kernel_disable_single_step();
-			handled_exception = 1;
+			handled_exception = true;
 		} else {
-			handled_exception = 0;
+			handled_exception = false;
 		}
 
 		*kernel_step = ARM_KERNEL_STEP_NONE;
 	}
 
-	return !handled_exception;
+	return handled_exception;
 }
-NOKPROBE_SYMBOL(reinstall_suspended_bps);
+NOKPROBE_SYMBOL(try_step_suspended_breakpoints);
 
 /*
  * Context-switcher for restoring suspended breakpoints.
@@ -987,12 +981,6 @@ static int __init arch_hw_breakpoint_init(void)
 	pr_info("found %d breakpoint and %d watchpoint registers.\n",
 		core_num_brps, core_num_wrps);
 
-	/* Register debug fault handlers. */
-	hook_debug_fault_code(DBG_ESR_EVT_HWBP, breakpoint_handler, SIGTRAP,
-			      TRAP_HWBKPT, "hw-breakpoint handler");
-	hook_debug_fault_code(DBG_ESR_EVT_HWWP, watchpoint_handler, SIGTRAP,
-			      TRAP_HWBKPT, "hw-watchpoint handler");
-
 	/*
 	 * Reset the breakpoint resources. We assume that a halting
 	 * debugger will leave the world in a nice state for us.
diff --git a/arch/arm64/kernel/hyp-stub.S b/arch/arm64/kernel/hyp-stub.S
index 65f76064c86b..085bc9972f6b 100644
--- a/arch/arm64/kernel/hyp-stub.S
+++ b/arch/arm64/kernel/hyp-stub.S
@@ -54,6 +54,11 @@ SYM_CODE_START_LOCAL(elx_sync)
 1:	cmp	x0, #HVC_FINALISE_EL2
 	b.eq	__finalise_el2
 
+	cmp	x0, #HVC_GET_ICH_VTR_EL2
+	b.ne	2f
+	mrs_s	x1, SYS_ICH_VTR_EL2
+	b	9f
+
 2:	cmp	x0, #HVC_SOFT_RESTART
 	b.ne	3f
 	mov	x0, x2
@@ -97,7 +102,7 @@ SYM_CODE_START_LOCAL(__finalise_el2)
 2:
 	// Engage the VHE magic!
 	mov_q	x0, HCR_HOST_VHE_FLAGS
-	msr	hcr_el2, x0
+	msr_hcr_el2 x0
 	isb
 
 	// Use the EL1 allocated stack, per-cpu offset
@@ -114,8 +119,8 @@ SYM_CODE_START_LOCAL(__finalise_el2)
 
 	// Use EL2 translations for SPE & TRBE and disable access from EL1
 	mrs	x0, mdcr_el2
-	bic	x0, x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
-	bic	x0, x0, #(MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT)
+	bic	x0, x0, #MDCR_EL2_E2PB_MASK
+	bic	x0, x0, #MDCR_EL2_E2TB_MASK
 	msr	mdcr_el2, x0
 
 	// Transfer the MM state from EL1 to EL2
diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h
index 8f5422ed1b75..85bc629270bd 100644
--- a/arch/arm64/kernel/image-vars.h
+++ b/arch/arm64/kernel/image-vars.h
@@ -10,6 +10,16 @@
 #error This file should only be included in vmlinux.lds.S
 #endif
 
+#if defined(CONFIG_LD_IS_LLD) && CONFIG_LLD_VERSION < 210000
+#define ASSERT(...)
+#endif
+
+#define PI_EXPORT_SYM(sym)		\
+	__PI_EXPORT_SYM(sym, __pi_ ## sym, Cannot export BSS symbol sym to startup code)
+#define __PI_EXPORT_SYM(sym, pisym, msg)\
+	PROVIDE(pisym = sym);		\
+	ASSERT((sym - KIMAGE_VADDR) < (__bss_start - KIMAGE_VADDR), #msg)
+
 PROVIDE(__efistub_primary_entry		= primary_entry);
 
 /*
@@ -36,40 +46,30 @@ PROVIDE(__pi___memcpy			= __pi_memcpy);
 PROVIDE(__pi___memmove			= __pi_memmove);
 PROVIDE(__pi___memset			= __pi_memset);
 
-PROVIDE(__pi_id_aa64isar1_override	= id_aa64isar1_override);
-PROVIDE(__pi_id_aa64isar2_override	= id_aa64isar2_override);
-PROVIDE(__pi_id_aa64mmfr0_override	= id_aa64mmfr0_override);
-PROVIDE(__pi_id_aa64mmfr1_override	= id_aa64mmfr1_override);
-PROVIDE(__pi_id_aa64mmfr2_override	= id_aa64mmfr2_override);
-PROVIDE(__pi_id_aa64pfr0_override	= id_aa64pfr0_override);
-PROVIDE(__pi_id_aa64pfr1_override	= id_aa64pfr1_override);
-PROVIDE(__pi_id_aa64smfr0_override	= id_aa64smfr0_override);
-PROVIDE(__pi_id_aa64zfr0_override	= id_aa64zfr0_override);
-PROVIDE(__pi_arm64_sw_feature_override	= arm64_sw_feature_override);
-PROVIDE(__pi_arm64_use_ng_mappings	= arm64_use_ng_mappings);
-#ifdef CONFIG_CAVIUM_ERRATUM_27456
-PROVIDE(__pi_cavium_erratum_27456_cpus	= cavium_erratum_27456_cpus);
-#endif
-PROVIDE(__pi__ctype			= _ctype);
-PROVIDE(__pi_memstart_offset_seed	= memstart_offset_seed);
-
-PROVIDE(__pi_init_idmap_pg_dir		= init_idmap_pg_dir);
-PROVIDE(__pi_init_idmap_pg_end		= init_idmap_pg_end);
-PROVIDE(__pi_init_pg_dir		= init_pg_dir);
-PROVIDE(__pi_init_pg_end		= init_pg_end);
-PROVIDE(__pi_swapper_pg_dir		= swapper_pg_dir);
-
-PROVIDE(__pi__text			= _text);
-PROVIDE(__pi__stext               	= _stext);
-PROVIDE(__pi__etext               	= _etext);
-PROVIDE(__pi___start_rodata       	= __start_rodata);
-PROVIDE(__pi___inittext_begin     	= __inittext_begin);
-PROVIDE(__pi___inittext_end       	= __inittext_end);
-PROVIDE(__pi___initdata_begin     	= __initdata_begin);
-PROVIDE(__pi___initdata_end       	= __initdata_end);
-PROVIDE(__pi__data                	= _data);
-PROVIDE(__pi___bss_start		= __bss_start);
-PROVIDE(__pi__end			= _end);
+PI_EXPORT_SYM(id_aa64isar1_override);
+PI_EXPORT_SYM(id_aa64isar2_override);
+PI_EXPORT_SYM(id_aa64mmfr0_override);
+PI_EXPORT_SYM(id_aa64mmfr1_override);
+PI_EXPORT_SYM(id_aa64mmfr2_override);
+PI_EXPORT_SYM(id_aa64pfr0_override);
+PI_EXPORT_SYM(id_aa64pfr1_override);
+PI_EXPORT_SYM(id_aa64smfr0_override);
+PI_EXPORT_SYM(id_aa64zfr0_override);
+PI_EXPORT_SYM(arm64_sw_feature_override);
+PI_EXPORT_SYM(arm64_use_ng_mappings);
+PI_EXPORT_SYM(_ctype);
+
+PI_EXPORT_SYM(swapper_pg_dir);
+
+PI_EXPORT_SYM(_text);
+PI_EXPORT_SYM(_stext);
+PI_EXPORT_SYM(_etext);
+PI_EXPORT_SYM(__start_rodata);
+PI_EXPORT_SYM(__inittext_begin);
+PI_EXPORT_SYM(__inittext_end);
+PI_EXPORT_SYM(__initdata_begin);
+PI_EXPORT_SYM(__initdata_end);
+PI_EXPORT_SYM(_data);
 
 #ifdef CONFIG_KVM
 
@@ -91,6 +91,7 @@ KVM_NVHE_ALIAS(spectre_bhb_patch_loop_mitigation_enable);
 KVM_NVHE_ALIAS(spectre_bhb_patch_wa3);
 KVM_NVHE_ALIAS(spectre_bhb_patch_clearbhb);
 KVM_NVHE_ALIAS(alt_cb_patch_nops);
+KVM_NVHE_ALIAS(kvm_compute_ich_hcr_trap_bits);
 
 /* Global kernel state accessed by nVHE hyp code. */
 KVM_NVHE_ALIAS(kvm_vgic_global_state);
@@ -105,15 +106,16 @@ KVM_NVHE_ALIAS(__hyp_stub_vectors);
 KVM_NVHE_ALIAS(vgic_v2_cpuif_trap);
 KVM_NVHE_ALIAS(vgic_v3_cpuif_trap);
 
+/* Static key indicating whether GICv3 has GICv2 compatibility */
+KVM_NVHE_ALIAS(vgic_v3_has_v2_compat);
+
+/* Static key which is set if CNTVOFF_EL2 is unusable */
+KVM_NVHE_ALIAS(broken_cntvoff_key);
+
 /* EL2 exception handling */
 KVM_NVHE_ALIAS(__start___kvm_ex_table);
 KVM_NVHE_ALIAS(__stop___kvm_ex_table);
 
-/* PMU available static key */
-#ifdef CONFIG_HW_PERF_EVENTS
-KVM_NVHE_ALIAS(kvm_arm_pmu_available);
-#endif
-
 /* Position-independent library routines */
 KVM_NVHE_ALIAS_HYP(clear_page, __pi_clear_page);
 KVM_NVHE_ALIAS_HYP(copy_page, __pi_copy_page);
@@ -132,6 +134,8 @@ KVM_NVHE_ALIAS(__hyp_text_start);
 KVM_NVHE_ALIAS(__hyp_text_end);
 KVM_NVHE_ALIAS(__hyp_bss_start);
 KVM_NVHE_ALIAS(__hyp_bss_end);
+KVM_NVHE_ALIAS(__hyp_data_start);
+KVM_NVHE_ALIAS(__hyp_data_end);
 KVM_NVHE_ALIAS(__hyp_rodata_start);
 KVM_NVHE_ALIAS(__hyp_rodata_end);
 
@@ -144,4 +148,17 @@ KVM_NVHE_ALIAS(kvm_protected_mode_initialized);
 _kernel_codesize = ABSOLUTE(__inittext_end - _text);
 #endif
 
+/*
+ * LLD will occasionally error out with a '__init_end does not converge' error
+ * if INIT_IDMAP_DIR_SIZE is defined in terms of _end, as this results in a
+ * circular dependency. Counter this by dimensioning the initial IDMAP page
+ * tables based on kimage_limit, which is defined such that its value should
+ * not change as a result of the initdata segment being pushed over a 64k
+ * segment boundary due to changes in INIT_IDMAP_DIR_SIZE, provided that its
+ * value doesn't change by more than 2M between linker passes.
+ */
+kimage_limit = ALIGN(ABSOLUTE(_end + SZ_64K), SZ_2M);
+
+#undef ASSERT
+
 #endif /* __ARM64_KERNEL_IMAGE_VARS_H */
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 85087e2df564..15dedb385b9e 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -51,7 +51,6 @@ static void init_irq_scs(void)
 			scs_alloc(early_cpu_to_node(cpu));
 }
 
-#ifdef CONFIG_VMAP_STACK
 static void __init init_irq_stacks(void)
 {
 	int cpu;
@@ -62,20 +61,8 @@ static void __init init_irq_stacks(void)
 		per_cpu(irq_stack_ptr, cpu) = p;
 	}
 }
-#else
-/* irq stack only needs to be 16 byte aligned - not IRQ_STACK_SIZE aligned. */
-DEFINE_PER_CPU_ALIGNED(unsigned long [IRQ_STACK_SIZE/sizeof(long)], irq_stack);
 
-static void init_irq_stacks(void)
-{
-	int cpu;
-
-	for_each_possible_cpu(cpu)
-		per_cpu(irq_stack_ptr, cpu) = per_cpu(irq_stack, cpu);
-}
-#endif
-
-#ifndef CONFIG_PREEMPT_RT
+#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK
 static void ____do_softirq(struct pt_regs *regs)
 {
 	__do_softirq();
diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c
index 1da3e25f9d9e..c9503ed45a6c 100644
--- a/arch/arm64/kernel/kaslr.c
+++ b/arch/arm64/kernel/kaslr.c
@@ -10,8 +10,6 @@
 #include <asm/cpufeature.h>
 #include <asm/memory.h>
 
-u16 __initdata memstart_offset_seed;
-
 bool __ro_after_init __kaslr_is_enabled = false;
 
 void __init kaslr_init(void)
diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
index f3c4d3a8a20f..968324a79a89 100644
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -234,23 +234,23 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
 	return err;
 }
 
-static int kgdb_brk_fn(struct pt_regs *regs, unsigned long esr)
+int kgdb_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
 	kgdb_handle_exception(1, SIGTRAP, 0, regs);
 	return DBG_HOOK_HANDLED;
 }
-NOKPROBE_SYMBOL(kgdb_brk_fn)
+NOKPROBE_SYMBOL(kgdb_brk_handler)
 
-static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned long esr)
+int kgdb_compiled_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
 	compiled_break = 1;
 	kgdb_handle_exception(1, SIGTRAP, 0, regs);
 
 	return DBG_HOOK_HANDLED;
 }
-NOKPROBE_SYMBOL(kgdb_compiled_brk_fn);
+NOKPROBE_SYMBOL(kgdb_compiled_brk_handler);
 
-static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned long esr)
+int kgdb_single_step_handler(struct pt_regs *regs, unsigned long esr)
 {
 	if (!kgdb_single_step)
 		return DBG_HOOK_ERROR;
@@ -258,21 +258,7 @@ static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned long esr)
 	kgdb_handle_exception(0, SIGTRAP, 0, regs);
 	return DBG_HOOK_HANDLED;
 }
-NOKPROBE_SYMBOL(kgdb_step_brk_fn);
-
-static struct break_hook kgdb_brkpt_hook = {
-	.fn		= kgdb_brk_fn,
-	.imm		= KGDB_DYN_DBG_BRK_IMM,
-};
-
-static struct break_hook kgdb_compiled_brkpt_hook = {
-	.fn		= kgdb_compiled_brk_fn,
-	.imm		= KGDB_COMPILED_DBG_BRK_IMM,
-};
-
-static struct step_hook kgdb_step_hook = {
-	.fn		= kgdb_step_brk_fn
-};
+NOKPROBE_SYMBOL(kgdb_single_step_handler);
 
 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 {
@@ -311,15 +297,7 @@ static struct notifier_block kgdb_notifier = {
  */
 int kgdb_arch_init(void)
 {
-	int ret = register_die_notifier(&kgdb_notifier);
-
-	if (ret != 0)
-		return ret;
-
-	register_kernel_break_hook(&kgdb_brkpt_hook);
-	register_kernel_break_hook(&kgdb_compiled_brkpt_hook);
-	register_kernel_step_hook(&kgdb_step_hook);
-	return 0;
+	return register_die_notifier(&kgdb_notifier);
 }
 
 /*
@@ -329,9 +307,6 @@ int kgdb_arch_init(void)
  */
 void kgdb_arch_exit(void)
 {
-	unregister_kernel_break_hook(&kgdb_brkpt_hook);
-	unregister_kernel_break_hook(&kgdb_compiled_brkpt_hook);
-	unregister_kernel_step_hook(&kgdb_step_hook);
 	unregister_die_notifier(&kgdb_notifier);
 }
 
diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
index 82e2203d86a3..239c16e3d02f 100644
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -207,37 +207,6 @@ void machine_kexec(struct kimage *kimage)
 	BUG(); /* Should never get here. */
 }
 
-static void machine_kexec_mask_interrupts(void)
-{
-	unsigned int i;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(i, desc) {
-		struct irq_chip *chip;
-		int ret;
-
-		chip = irq_desc_get_chip(desc);
-		if (!chip)
-			continue;
-
-		/*
-		 * First try to remove the active state. If this
-		 * fails, try to EOI the interrupt.
-		 */
-		ret = irq_set_irqchip_state(i, IRQCHIP_STATE_ACTIVE, false);
-
-		if (ret && irqd_irq_inprogress(&desc->irq_data) &&
-		    chip->irq_eoi)
-			chip->irq_eoi(&desc->irq_data);
-
-		if (chip->irq_mask)
-			chip->irq_mask(&desc->irq_data);
-
-		if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data))
-			chip->irq_disable(&desc->irq_data);
-	}
-}
-
 /**
  * machine_crash_shutdown - shutdown non-crashing cpus and save registers
  */
@@ -282,7 +251,7 @@ void crash_post_resume(void)
  * marked as Reserved as memory was allocated via memblock_reserve().
  *
  * In hibernation, the pages which are Reserved and yet "nosave" are excluded
- * from the hibernation iamge. crash_is_nosave() does thich check for crash
+ * from the hibernation image. crash_is_nosave() does thich check for crash
  * dump kernel and will reduce the total size of hibernation image.
  */
 
diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c
index af1ca875c52c..410060ebd86d 100644
--- a/arch/arm64/kernel/machine_kexec_file.c
+++ b/arch/arm64/kernel/machine_kexec_file.c
@@ -94,7 +94,7 @@ int load_other_segments(struct kimage *image,
 			char *initrd, unsigned long initrd_len,
 			char *cmdline)
 {
-	struct kexec_buf kbuf;
+	struct kexec_buf kbuf = {};
 	void *dtb = NULL;
 	unsigned long initrd_load_addr = 0, dtb_len,
 		      orig_segments = image->nr_segments;
diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c
index bde32979c06a..7afd370da9f4 100644
--- a/arch/arm64/kernel/module-plts.c
+++ b/arch/arm64/kernel/module-plts.c
@@ -283,7 +283,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 	unsigned long core_plts = 0;
 	unsigned long init_plts = 0;
 	Elf64_Sym *syms = NULL;
-	Elf_Shdr *pltsec, *tramp = NULL;
+	Elf_Shdr *pltsec, *tramp = NULL, *init_tramp = NULL;
 	int i;
 
 	/*
@@ -298,6 +298,9 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		else if (!strcmp(secstrings + sechdrs[i].sh_name,
 				 ".text.ftrace_trampoline"))
 			tramp = sechdrs + i;
+		else if (!strcmp(secstrings + sechdrs[i].sh_name,
+				 ".init.text.ftrace_trampoline"))
+			init_tramp = sechdrs + i;
 		else if (sechdrs[i].sh_type == SHT_SYMTAB)
 			syms = (Elf64_Sym *)sechdrs[i].sh_addr;
 	}
@@ -363,5 +366,12 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		tramp->sh_size = NR_FTRACE_PLTS * sizeof(struct plt_entry);
 	}
 
+	if (init_tramp) {
+		init_tramp->sh_type = SHT_NOBITS;
+		init_tramp->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
+		init_tramp->sh_addralign = __alignof__(struct plt_entry);
+		init_tramp->sh_size = NR_FTRACE_PLTS * sizeof(struct plt_entry);
+	}
+
 	return 0;
 }
diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c
index 06bb680bfe97..24adb581af0e 100644
--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -23,6 +23,7 @@
 #include <asm/insn.h>
 #include <asm/scs.h>
 #include <asm/sections.h>
+#include <asm/text-patching.h>
 
 enum aarch64_reloc_op {
 	RELOC_OP_NONE,
@@ -48,7 +49,17 @@ static u64 do_reloc(enum aarch64_reloc_op reloc_op, __le32 *place, u64 val)
 	return 0;
 }
 
-static int reloc_data(enum aarch64_reloc_op op, void *place, u64 val, int len)
+#define WRITE_PLACE(place, val, mod) do {				\
+	__typeof__(val) __val = (val);					\
+									\
+	if (mod->state == MODULE_STATE_UNFORMED)			\
+		*(place) = __val;					\
+	else								\
+		aarch64_insn_copy(place, &(__val), sizeof(*place));	\
+} while (0)
+
+static int reloc_data(enum aarch64_reloc_op op, void *place, u64 val, int len,
+		      struct module *me)
 {
 	s64 sval = do_reloc(op, place, val);
 
@@ -66,7 +77,7 @@ static int reloc_data(enum aarch64_reloc_op op, void *place, u64 val, int len)
 
 	switch (len) {
 	case 16:
-		*(s16 *)place = sval;
+		WRITE_PLACE((s16 *)place, sval, me);
 		switch (op) {
 		case RELOC_OP_ABS:
 			if (sval < 0 || sval > U16_MAX)
@@ -82,7 +93,7 @@ static int reloc_data(enum aarch64_reloc_op op, void *place, u64 val, int len)
 		}
 		break;
 	case 32:
-		*(s32 *)place = sval;
+		WRITE_PLACE((s32 *)place, sval, me);
 		switch (op) {
 		case RELOC_OP_ABS:
 			if (sval < 0 || sval > U32_MAX)
@@ -98,7 +109,7 @@ static int reloc_data(enum aarch64_reloc_op op, void *place, u64 val, int len)
 		}
 		break;
 	case 64:
-		*(s64 *)place = sval;
+		WRITE_PLACE((s64 *)place, sval, me);
 		break;
 	default:
 		pr_err("Invalid length (%d) for data relocation\n", len);
@@ -113,7 +124,8 @@ enum aarch64_insn_movw_imm_type {
 };
 
 static int reloc_insn_movw(enum aarch64_reloc_op op, __le32 *place, u64 val,
-			   int lsb, enum aarch64_insn_movw_imm_type imm_type)
+			   int lsb, enum aarch64_insn_movw_imm_type imm_type,
+			   struct module *me)
 {
 	u64 imm;
 	s64 sval;
@@ -145,7 +157,7 @@ static int reloc_insn_movw(enum aarch64_reloc_op op, __le32 *place, u64 val,
 
 	/* Update the instruction with the new encoding. */
 	insn = aarch64_insn_encode_immediate(AARCH64_INSN_IMM_16, insn, imm);
-	*place = cpu_to_le32(insn);
+	WRITE_PLACE(place, cpu_to_le32(insn), me);
 
 	if (imm > U16_MAX)
 		return -ERANGE;
@@ -154,7 +166,8 @@ static int reloc_insn_movw(enum aarch64_reloc_op op, __le32 *place, u64 val,
 }
 
 static int reloc_insn_imm(enum aarch64_reloc_op op, __le32 *place, u64 val,
-			  int lsb, int len, enum aarch64_insn_imm_type imm_type)
+			  int lsb, int len, enum aarch64_insn_imm_type imm_type,
+			  struct module *me)
 {
 	u64 imm, imm_mask;
 	s64 sval;
@@ -170,7 +183,7 @@ static int reloc_insn_imm(enum aarch64_reloc_op op, __le32 *place, u64 val,
 
 	/* Update the instruction's immediate field. */
 	insn = aarch64_insn_encode_immediate(imm_type, insn, imm);
-	*place = cpu_to_le32(insn);
+	WRITE_PLACE(place, cpu_to_le32(insn), me);
 
 	/*
 	 * Extract the upper value bits (including the sign bit) and
@@ -189,17 +202,17 @@ static int reloc_insn_imm(enum aarch64_reloc_op op, __le32 *place, u64 val,
 }
 
 static int reloc_insn_adrp(struct module *mod, Elf64_Shdr *sechdrs,
-			   __le32 *place, u64 val)
+			   __le32 *place, u64 val, struct module *me)
 {
 	u32 insn;
 
 	if (!is_forbidden_offset_for_adrp(place))
 		return reloc_insn_imm(RELOC_OP_PAGE, place, val, 12, 21,
-				      AARCH64_INSN_IMM_ADR);
+				      AARCH64_INSN_IMM_ADR, me);
 
 	/* patch ADRP to ADR if it is in range */
 	if (!reloc_insn_imm(RELOC_OP_PREL, place, val & ~0xfff, 0, 21,
-			    AARCH64_INSN_IMM_ADR)) {
+			    AARCH64_INSN_IMM_ADR, me)) {
 		insn = le32_to_cpu(*place);
 		insn &= ~BIT(31);
 	} else {
@@ -211,7 +224,7 @@ static int reloc_insn_adrp(struct module *mod, Elf64_Shdr *sechdrs,
 						   AARCH64_INSN_BRANCH_NOLINK);
 	}
 
-	*place = cpu_to_le32(insn);
+	WRITE_PLACE(place, cpu_to_le32(insn), me);
 	return 0;
 }
 
@@ -255,23 +268,23 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		/* Data relocations. */
 		case R_AARCH64_ABS64:
 			overflow_check = false;
-			ovf = reloc_data(RELOC_OP_ABS, loc, val, 64);
+			ovf = reloc_data(RELOC_OP_ABS, loc, val, 64, me);
 			break;
 		case R_AARCH64_ABS32:
-			ovf = reloc_data(RELOC_OP_ABS, loc, val, 32);
+			ovf = reloc_data(RELOC_OP_ABS, loc, val, 32, me);
 			break;
 		case R_AARCH64_ABS16:
-			ovf = reloc_data(RELOC_OP_ABS, loc, val, 16);
+			ovf = reloc_data(RELOC_OP_ABS, loc, val, 16, me);
 			break;
 		case R_AARCH64_PREL64:
 			overflow_check = false;
-			ovf = reloc_data(RELOC_OP_PREL, loc, val, 64);
+			ovf = reloc_data(RELOC_OP_PREL, loc, val, 64, me);
 			break;
 		case R_AARCH64_PREL32:
-			ovf = reloc_data(RELOC_OP_PREL, loc, val, 32);
+			ovf = reloc_data(RELOC_OP_PREL, loc, val, 32, me);
 			break;
 		case R_AARCH64_PREL16:
-			ovf = reloc_data(RELOC_OP_PREL, loc, val, 16);
+			ovf = reloc_data(RELOC_OP_PREL, loc, val, 16, me);
 			break;
 
 		/* MOVW instruction relocations. */
@@ -280,88 +293,88 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			fallthrough;
 		case R_AARCH64_MOVW_UABS_G0:
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0,
-					      AARCH64_INSN_IMM_MOVKZ);
+					      AARCH64_INSN_IMM_MOVKZ, me);
 			break;
 		case R_AARCH64_MOVW_UABS_G1_NC:
 			overflow_check = false;
 			fallthrough;
 		case R_AARCH64_MOVW_UABS_G1:
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16,
-					      AARCH64_INSN_IMM_MOVKZ);
+					      AARCH64_INSN_IMM_MOVKZ, me);
 			break;
 		case R_AARCH64_MOVW_UABS_G2_NC:
 			overflow_check = false;
 			fallthrough;
 		case R_AARCH64_MOVW_UABS_G2:
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32,
-					      AARCH64_INSN_IMM_MOVKZ);
+					      AARCH64_INSN_IMM_MOVKZ, me);
 			break;
 		case R_AARCH64_MOVW_UABS_G3:
 			/* We're using the top bits so we can't overflow. */
 			overflow_check = false;
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 48,
-					      AARCH64_INSN_IMM_MOVKZ);
+					      AARCH64_INSN_IMM_MOVKZ, me);
 			break;
 		case R_AARCH64_MOVW_SABS_G0:
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0,
-					      AARCH64_INSN_IMM_MOVNZ);
+					      AARCH64_INSN_IMM_MOVNZ, me);
 			break;
 		case R_AARCH64_MOVW_SABS_G1:
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16,
-					      AARCH64_INSN_IMM_MOVNZ);
+					      AARCH64_INSN_IMM_MOVNZ, me);
 			break;
 		case R_AARCH64_MOVW_SABS_G2:
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32,
-					      AARCH64_INSN_IMM_MOVNZ);
+					      AARCH64_INSN_IMM_MOVNZ, me);
 			break;
 		case R_AARCH64_MOVW_PREL_G0_NC:
 			overflow_check = false;
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 0,
-					      AARCH64_INSN_IMM_MOVKZ);
+					      AARCH64_INSN_IMM_MOVKZ, me);
 			break;
 		case R_AARCH64_MOVW_PREL_G0:
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 0,
-					      AARCH64_INSN_IMM_MOVNZ);
+					      AARCH64_INSN_IMM_MOVNZ, me);
 			break;
 		case R_AARCH64_MOVW_PREL_G1_NC:
 			overflow_check = false;
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 16,
-					      AARCH64_INSN_IMM_MOVKZ);
+					      AARCH64_INSN_IMM_MOVKZ, me);
 			break;
 		case R_AARCH64_MOVW_PREL_G1:
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 16,
-					      AARCH64_INSN_IMM_MOVNZ);
+					      AARCH64_INSN_IMM_MOVNZ, me);
 			break;
 		case R_AARCH64_MOVW_PREL_G2_NC:
 			overflow_check = false;
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 32,
-					      AARCH64_INSN_IMM_MOVKZ);
+					      AARCH64_INSN_IMM_MOVKZ, me);
 			break;
 		case R_AARCH64_MOVW_PREL_G2:
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 32,
-					      AARCH64_INSN_IMM_MOVNZ);
+					      AARCH64_INSN_IMM_MOVNZ, me);
 			break;
 		case R_AARCH64_MOVW_PREL_G3:
 			/* We're using the top bits so we can't overflow. */
 			overflow_check = false;
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 48,
-					      AARCH64_INSN_IMM_MOVNZ);
+					      AARCH64_INSN_IMM_MOVNZ, me);
 			break;
 
 		/* Immediate instruction relocations. */
 		case R_AARCH64_LD_PREL_LO19:
 			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 19,
-					     AARCH64_INSN_IMM_19);
+					     AARCH64_INSN_IMM_19, me);
 			break;
 		case R_AARCH64_ADR_PREL_LO21:
 			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 0, 21,
-					     AARCH64_INSN_IMM_ADR);
+					     AARCH64_INSN_IMM_ADR, me);
 			break;
 		case R_AARCH64_ADR_PREL_PG_HI21_NC:
 			overflow_check = false;
 			fallthrough;
 		case R_AARCH64_ADR_PREL_PG_HI21:
-			ovf = reloc_insn_adrp(me, sechdrs, loc, val);
+			ovf = reloc_insn_adrp(me, sechdrs, loc, val, me);
 			if (ovf && ovf != -ERANGE)
 				return ovf;
 			break;
@@ -369,46 +382,46 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		case R_AARCH64_LDST8_ABS_LO12_NC:
 			overflow_check = false;
 			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 0, 12,
-					     AARCH64_INSN_IMM_12);
+					     AARCH64_INSN_IMM_12, me);
 			break;
 		case R_AARCH64_LDST16_ABS_LO12_NC:
 			overflow_check = false;
 			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 1, 11,
-					     AARCH64_INSN_IMM_12);
+					     AARCH64_INSN_IMM_12, me);
 			break;
 		case R_AARCH64_LDST32_ABS_LO12_NC:
 			overflow_check = false;
 			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 2, 10,
-					     AARCH64_INSN_IMM_12);
+					     AARCH64_INSN_IMM_12, me);
 			break;
 		case R_AARCH64_LDST64_ABS_LO12_NC:
 			overflow_check = false;
 			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 3, 9,
-					     AARCH64_INSN_IMM_12);
+					     AARCH64_INSN_IMM_12, me);
 			break;
 		case R_AARCH64_LDST128_ABS_LO12_NC:
 			overflow_check = false;
 			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 4, 8,
-					     AARCH64_INSN_IMM_12);
+					     AARCH64_INSN_IMM_12, me);
 			break;
 		case R_AARCH64_TSTBR14:
 			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 14,
-					     AARCH64_INSN_IMM_14);
+					     AARCH64_INSN_IMM_14, me);
 			break;
 		case R_AARCH64_CONDBR19:
 			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 19,
-					     AARCH64_INSN_IMM_19);
+					     AARCH64_INSN_IMM_19, me);
 			break;
 		case R_AARCH64_JUMP26:
 		case R_AARCH64_CALL26:
 			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 26,
-					     AARCH64_INSN_IMM_26);
+					     AARCH64_INSN_IMM_26, me);
 			if (ovf == -ERANGE) {
 				val = module_emit_plt_entry(me, sechdrs, loc, &rel[i], sym);
 				if (!val)
 					return -ENOEXEC;
 				ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2,
-						     26, AARCH64_INSN_IMM_26);
+						     26, AARCH64_INSN_IMM_26, me);
 			}
 			break;
 
@@ -453,6 +466,17 @@ static int module_init_ftrace_plt(const Elf_Ehdr *hdr,
 	__init_plt(&plts[FTRACE_PLT_IDX], FTRACE_ADDR);
 
 	mod->arch.ftrace_trampolines = plts;
+
+	s = find_section(hdr, sechdrs, ".init.text.ftrace_trampoline");
+	if (!s)
+		return -ENOEXEC;
+
+	plts = (void *)s->sh_addr;
+
+	__init_plt(&plts[FTRACE_PLT_IDX], FTRACE_ADDR);
+
+	mod->arch.init_ftrace_trampolines = plts;
+
 #endif
 	return 0;
 }
@@ -465,16 +489,29 @@ int module_finalize(const Elf_Ehdr *hdr,
 	int ret;
 
 	s = find_section(hdr, sechdrs, ".altinstructions");
-	if (s)
-		apply_alternatives_module((void *)s->sh_addr, s->sh_size);
+	if (s) {
+		ret = apply_alternatives_module((void *)s->sh_addr, s->sh_size);
+		if (ret < 0) {
+			pr_err("module %s: error occurred when applying alternatives\n", me->name);
+			return ret;
+		}
+	}
 
 	if (scs_is_dynamic()) {
 		s = find_section(hdr, sechdrs, ".init.eh_frame");
 		if (s) {
-			ret = __pi_scs_patch((void *)s->sh_addr, s->sh_size);
-			if (ret)
+			/*
+			 * Because we can reject modules that are malformed
+			 * so SCS patching fails, skip dry run and try to patch
+			 * it in place. If patching fails, the module would not
+			 * be loaded anyway.
+			 */
+			ret = __pi_scs_patch((void *)s->sh_addr, s->sh_size, true);
+			if (ret) {
 				pr_err("module %s: error occurred during dynamic SCS patching (%d)\n",
 				       me->name, ret);
+				return -ENOEXEC;
+			}
 		}
 	}
 
diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c
index 2fbfd27ff5f2..32148bf09c1d 100644
--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@@ -157,6 +157,24 @@ void mte_enable_kernel_asymm(void)
 		mte_enable_kernel_sync();
 	}
 }
+
+int mte_enable_kernel_store_only(void)
+{
+	/*
+	 * If the CPU does not support MTE store only,
+	 * the kernel checks all operations.
+	 */
+	if (!cpus_have_cap(ARM64_MTE_STORE_ONLY))
+		return -EINVAL;
+
+	sysreg_clear_set(sctlr_el1, SCTLR_EL1_TCSO_MASK,
+			 SYS_FIELD_PREP(SCTLR_EL1, TCSO, 1));
+	isb();
+
+	pr_info_once("MTE: enabled store only mode at EL1\n");
+
+	return 0;
+}
 #endif
 
 #ifdef CONFIG_KASAN_HW_TAGS
@@ -200,7 +218,7 @@ static void mte_update_sctlr_user(struct task_struct *task)
 	 * program requested values go with what was requested.
 	 */
 	resolved_mte_tcf = (mte_ctrl & pref) ? pref : mte_ctrl;
-	sctlr &= ~SCTLR_EL1_TCF0_MASK;
+	sctlr &= ~(SCTLR_EL1_TCF0_MASK | SCTLR_EL1_TCSO0_MASK);
 	/*
 	 * Pick an actual setting. The order in which we check for
 	 * set bits and map into register values determines our
@@ -212,6 +230,10 @@ static void mte_update_sctlr_user(struct task_struct *task)
 		sctlr |= SYS_FIELD_PREP_ENUM(SCTLR_EL1, TCF0, ASYNC);
 	else if (resolved_mte_tcf & MTE_CTRL_TCF_SYNC)
 		sctlr |= SYS_FIELD_PREP_ENUM(SCTLR_EL1, TCF0, SYNC);
+
+	if (mte_ctrl & MTE_CTRL_STORE_ONLY)
+		sctlr |= SYS_FIELD_PREP(SCTLR_EL1, TCSO0, 1);
+
 	task->thread.sctlr_user = sctlr;
 }
 
@@ -371,6 +393,9 @@ long set_mte_ctrl(struct task_struct *task, unsigned long arg)
 	    (arg & PR_MTE_TCF_SYNC))
 		mte_ctrl |= MTE_CTRL_TCF_ASYMM;
 
+	if (arg & PR_MTE_STORE_ONLY)
+		mte_ctrl |= MTE_CTRL_STORE_ONLY;
+
 	task->thread.mte_ctrl = mte_ctrl;
 	if (task == current) {
 		preempt_disable();
@@ -398,6 +423,8 @@ long get_mte_ctrl(struct task_struct *task)
 		ret |= PR_MTE_TCF_ASYNC;
 	if (mte_ctrl & MTE_CTRL_TCF_SYNC)
 		ret |= PR_MTE_TCF_SYNC;
+	if (mte_ctrl & MTE_CTRL_STORE_ONLY)
+		ret |= PR_MTE_STORE_ONLY;
 
 	return ret;
 }
@@ -449,9 +476,10 @@ static int __access_remote_tags(struct mm_struct *mm, unsigned long addr,
 
 		folio = page_folio(page);
 		if (folio_test_hugetlb(folio))
-			WARN_ON_ONCE(!folio_test_hugetlb_mte_tagged(folio));
+			WARN_ON_ONCE(!folio_test_hugetlb_mte_tagged(folio) &&
+				     !is_huge_zero_folio(folio));
 		else
-			WARN_ON_ONCE(!page_mte_tagged(page));
+			WARN_ON_ONCE(!page_mte_tagged(page) && !is_zero_page(page));
 
 		/* limit access to the end of the page */
 		offset = offset_in_page(addr);
diff --git a/arch/arm64/kernel/patching.c b/arch/arm64/kernel/patching.c
index 7f99723fbb8c..1041bc67a3ee 100644
--- a/arch/arm64/kernel/patching.c
+++ b/arch/arm64/kernel/patching.c
@@ -30,20 +30,17 @@ static bool is_image_text(unsigned long addr)
 
 static void __kprobes *patch_map(void *addr, int fixmap)
 {
-	unsigned long uintaddr = (uintptr_t) addr;
-	bool image = is_image_text(uintaddr);
-	struct page *page;
-
-	if (image)
-		page = phys_to_page(__pa_symbol(addr));
-	else if (IS_ENABLED(CONFIG_EXECMEM))
-		page = vmalloc_to_page(addr);
-	else
-		return addr;
-
-	BUG_ON(!page);
-	return (void *)set_fixmap_offset(fixmap, page_to_phys(page) +
-			(uintaddr & ~PAGE_MASK));
+	phys_addr_t phys;
+
+	if (is_image_text((unsigned long)addr)) {
+		phys = __pa_symbol(addr);
+	} else {
+		struct page *page = vmalloc_to_page(addr);
+		BUG_ON(!page);
+		phys = page_to_phys(page) + offset_in_page(addr);
+	}
+
+	return (void *)set_fixmap_offset(fixmap, phys);
 }
 
 static void __kprobes patch_unmap(int fixmap)
diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile
index 4d11a8c29181..be92d73c25b2 100644
--- a/arch/arm64/kernel/pi/Makefile
+++ b/arch/arm64/kernel/pi/Makefile
@@ -2,7 +2,7 @@
 # Copyright 2022 Google LLC
 
 KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \
-		   -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \
+		   -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_KSTACK_ERASE) \
 		   $(DISABLE_LATENT_ENTROPY_PLUGIN) \
 		   $(call cc-option,-mbranch-protection=none) \
 		   -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
@@ -41,4 +41,4 @@ obj-y					:= idreg-override.pi.o \
 obj-$(CONFIG_RELOCATABLE)		+= relocate.pi.o
 obj-$(CONFIG_RANDOMIZE_BASE)		+= kaslr_early.pi.o
 obj-$(CONFIG_UNWIND_PATCH_PAC_INTO_SCS)	+= patch-scs.pi.o
-extra-y					:= $(patsubst %.pi.o,%.o,$(obj-y))
+targets					:= $(patsubst %.pi.o,%.o,$(obj-y))
diff --git a/arch/arm64/kernel/pi/idreg-override.c b/arch/arm64/kernel/pi/idreg-override.c
index 22159251eb3a..bc57b290e5e7 100644
--- a/arch/arm64/kernel/pi/idreg-override.c
+++ b/arch/arm64/kernel/pi/idreg-override.c
@@ -83,6 +83,15 @@ static bool __init mmfr2_varange_filter(u64 val)
 		id_aa64mmfr0_override.val |=
 			(ID_AA64MMFR0_EL1_TGRAN_LPA2 - 1) << ID_AA64MMFR0_EL1_TGRAN_SHIFT;
 		id_aa64mmfr0_override.mask |= 0xfU << ID_AA64MMFR0_EL1_TGRAN_SHIFT;
+
+		/*
+		 * Override PARange to 48 bits - the override will just be
+		 * ignored if the actual PARange is smaller, but this is
+		 * unlikely to be the case for LPA2 capable silicon.
+		 */
+		id_aa64mmfr0_override.val |=
+			ID_AA64MMFR0_EL1_PARANGE_48 << ID_AA64MMFR0_EL1_PARANGE_SHIFT;
+		id_aa64mmfr0_override.mask |= 0xfU << ID_AA64MMFR0_EL1_PARANGE_SHIFT;
 	}
 #endif
 	return true;
@@ -118,6 +127,7 @@ static const struct ftr_set_desc pfr0 __prel64_initconst = {
 	.fields		= {
 	        FIELD("sve", ID_AA64PFR0_EL1_SVE_SHIFT, pfr0_sve_filter),
 		FIELD("el0", ID_AA64PFR0_EL1_EL0_SHIFT, NULL),
+		FIELD("mpam", ID_AA64PFR0_EL1_MPAM_SHIFT, NULL),
 		{}
 	},
 };
@@ -145,6 +155,7 @@ static const struct ftr_set_desc pfr1 __prel64_initconst = {
 		FIELD("gcs", ID_AA64PFR1_EL1_GCS_SHIFT, NULL),
 		FIELD("mte", ID_AA64PFR1_EL1_MTE_SHIFT, NULL),
 		FIELD("sme", ID_AA64PFR1_EL1_SME_SHIFT, pfr1_sme_filter),
+		FIELD("mpam_frac", ID_AA64PFR1_EL1_MPAM_frac_SHIFT, NULL),
 		{}
 	},
 };
@@ -237,6 +248,7 @@ static const struct {
 	{ "rodata=off",			"arm64_sw.rodataoff=1" },
 	{ "arm64.nolva",		"id_aa64mmfr2.varange=0" },
 	{ "arm64.no32bit_el0",		"id_aa64pfr0.el0=1" },
+	{ "arm64.nompam",		"id_aa64pfr0.mpam=0 id_aa64pfr1.mpam_frac=0" },
 };
 
 static int __init parse_hexdigit(const char *p, u64 *v)
diff --git a/arch/arm64/kernel/pi/kaslr_early.c b/arch/arm64/kernel/pi/kaslr_early.c
index 0257b43819db..e0e018046a46 100644
--- a/arch/arm64/kernel/pi/kaslr_early.c
+++ b/arch/arm64/kernel/pi/kaslr_early.c
@@ -18,8 +18,6 @@
 
 #include "pi.h"
 
-extern u16 memstart_offset_seed;
-
 static u64 __init get_kaslr_seed(void *fdt, int node)
 {
 	static char const seed_str[] __initconst = "kaslr-seed";
@@ -53,8 +51,6 @@ u64 __init kaslr_early_init(void *fdt, int chosen)
 			return 0;
 	}
 
-	memstart_offset_seed = seed & U16_MAX;
-
 	/*
 	 * OK, so we are proceeding with KASLR enabled. Calculate a suitable
 	 * kernel image offset from the seed. Let's place the kernel in the
diff --git a/arch/arm64/kernel/pi/map_kernel.c b/arch/arm64/kernel/pi/map_kernel.c
index f374a3e5a5fe..a852264958c3 100644
--- a/arch/arm64/kernel/pi/map_kernel.c
+++ b/arch/arm64/kernel/pi/map_kernel.c
@@ -18,9 +18,9 @@
 
 extern const u8 __eh_frame_start[], __eh_frame_end[];
 
-extern void idmap_cpu_replace_ttbr1(void *pgdir);
+extern void idmap_cpu_replace_ttbr1(phys_addr_t pgdir);
 
-static void __init map_segment(pgd_t *pg_dir, u64 *pgd, u64 va_offset,
+static void __init map_segment(pgd_t *pg_dir, phys_addr_t *pgd, u64 va_offset,
 			       void *start, void *end, pgprot_t prot,
 			       bool may_use_cont, int root_level)
 {
@@ -40,7 +40,7 @@ static void __init map_kernel(u64 kaslr_offset, u64 va_offset, int root_level)
 {
 	bool enable_scs = IS_ENABLED(CONFIG_UNWIND_PATCH_PAC_INTO_SCS);
 	bool twopass = IS_ENABLED(CONFIG_RELOCATABLE);
-	u64 pgdp = (u64)init_pg_dir + PAGE_SIZE;
+	phys_addr_t pgdp = (phys_addr_t)init_pg_dir + PAGE_SIZE;
 	pgprot_t text_prot = PAGE_KERNEL_ROX;
 	pgprot_t data_prot = PAGE_KERNEL;
 	pgprot_t prot;
@@ -78,6 +78,12 @@ static void __init map_kernel(u64 kaslr_offset, u64 va_offset, int root_level)
 	twopass |= enable_scs;
 	prot = twopass ? data_prot : text_prot;
 
+	/*
+	 * [_stext, _text) isn't executed after boot and contains some
+	 * non-executable, unpredictable data, so map it non-executable.
+	 */
+	map_segment(init_pg_dir, &pgdp, va_offset, _text, _stext, data_prot,
+		    false, root_level);
 	map_segment(init_pg_dir, &pgdp, va_offset, _stext, _etext, prot,
 		    !twopass, root_level);
 	map_segment(init_pg_dir, &pgdp, va_offset, __start_rodata,
@@ -90,7 +96,7 @@ static void __init map_kernel(u64 kaslr_offset, u64 va_offset, int root_level)
 		    true, root_level);
 	dsb(ishst);
 
-	idmap_cpu_replace_ttbr1(init_pg_dir);
+	idmap_cpu_replace_ttbr1((phys_addr_t)init_pg_dir);
 
 	if (twopass) {
 		if (IS_ENABLED(CONFIG_RELOCATABLE))
@@ -98,7 +104,7 @@ static void __init map_kernel(u64 kaslr_offset, u64 va_offset, int root_level)
 
 		if (enable_scs) {
 			scs_patch(__eh_frame_start + va_offset,
-				  __eh_frame_end - __eh_frame_start);
+				  __eh_frame_end - __eh_frame_start, false);
 			asm("ic ialluis");
 
 			dynamic_scs_is_enabled = true;
@@ -129,13 +135,19 @@ static void __init map_kernel(u64 kaslr_offset, u64 va_offset, int root_level)
 	/* Copy the root page table to its final location */
 	memcpy((void *)swapper_pg_dir + va_offset, init_pg_dir, PAGE_SIZE);
 	dsb(ishst);
-	idmap_cpu_replace_ttbr1(swapper_pg_dir);
+	idmap_cpu_replace_ttbr1((phys_addr_t)swapper_pg_dir);
 }
 
-static void noinline __section(".idmap.text") set_ttbr0_for_lpa2(u64 ttbr)
+static void noinline __section(".idmap.text") set_ttbr0_for_lpa2(phys_addr_t ttbr)
 {
 	u64 sctlr = read_sysreg(sctlr_el1);
-	u64 tcr = read_sysreg(tcr_el1) | TCR_DS;
+	u64 tcr = read_sysreg(tcr_el1) | TCR_EL1_DS;
+	u64 mmfr0 = read_sysreg(id_aa64mmfr0_el1);
+	u64 parange = cpuid_feature_extract_unsigned_field(mmfr0,
+							   ID_AA64MMFR0_EL1_PARANGE_SHIFT);
+
+	tcr &= ~TCR_EL1_IPS_MASK;
+	tcr |= parange << TCR_EL1_IPS_SHIFT;
 
 	asm("	msr	sctlr_el1, %0		;"
 	    "	isb				;"
@@ -153,7 +165,7 @@ static void noinline __section(".idmap.text") set_ttbr0_for_lpa2(u64 ttbr)
 static void __init remap_idmap_for_lpa2(void)
 {
 	/* clear the bits that change meaning once LPA2 is turned on */
-	pteval_t mask = PTE_SHARED;
+	ptdesc_t mask = PTE_SHARED;
 
 	/*
 	 * We have to clear bits [9:8] in all block or page descriptors in the
@@ -166,30 +178,30 @@ static void __init remap_idmap_for_lpa2(void)
 	 */
 	create_init_idmap(init_pg_dir, mask);
 	dsb(ishst);
-	set_ttbr0_for_lpa2((u64)init_pg_dir);
+	set_ttbr0_for_lpa2((phys_addr_t)init_pg_dir);
 
 	/*
 	 * Recreate the initial ID map with the same granularity as before.
 	 * Don't bother with the FDT, we no longer need it after this.
 	 */
 	memset(init_idmap_pg_dir, 0,
-	       (u64)init_idmap_pg_end - (u64)init_idmap_pg_dir);
+	       (char *)init_idmap_pg_end - (char *)init_idmap_pg_dir);
 
 	create_init_idmap(init_idmap_pg_dir, mask);
 	dsb(ishst);
 
 	/* switch back to the updated initial ID map */
-	set_ttbr0_for_lpa2((u64)init_idmap_pg_dir);
+	set_ttbr0_for_lpa2((phys_addr_t)init_idmap_pg_dir);
 
 	/* wipe the temporary ID map from memory */
-	memset(init_pg_dir, 0, (u64)init_pg_end - (u64)init_pg_dir);
+	memset(init_pg_dir, 0, (char *)init_pg_end - (char *)init_pg_dir);
 }
 
-static void __init map_fdt(u64 fdt)
+static void *__init map_fdt(phys_addr_t fdt)
 {
 	static u8 ptes[INIT_IDMAP_FDT_SIZE] __initdata __aligned(PAGE_SIZE);
-	u64 efdt = fdt + MAX_FDT_SIZE;
-	u64 ptep = (u64)ptes;
+	phys_addr_t efdt = fdt + MAX_FDT_SIZE;
+	phys_addr_t ptep = (phys_addr_t)ptes; /* We're idmapped when called */
 
 	/*
 	 * Map up to MAX_FDT_SIZE bytes, but avoid overlap with
@@ -199,9 +211,34 @@ static void __init map_fdt(u64 fdt)
 		  fdt, PAGE_KERNEL, IDMAP_ROOT_LEVEL,
 		  (pte_t *)init_idmap_pg_dir, false, 0);
 	dsb(ishst);
+
+	return (void *)fdt;
 }
 
-asmlinkage void __init early_map_kernel(u64 boot_status, void *fdt)
+/*
+ * PI version of the Cavium Eratum 27456 detection, which makes it
+ * impossible to use non-global mappings.
+ */
+static bool __init ng_mappings_allowed(void)
+{
+	static const struct midr_range cavium_erratum_27456_cpus[] __initconst = {
+		/* Cavium ThunderX, T88 pass 1.x - 2.1 */
+		MIDR_RANGE(MIDR_THUNDERX, 0, 0, 1, 1),
+		/* Cavium ThunderX, T81 pass 1.0 */
+		MIDR_REV(MIDR_THUNDERX_81XX, 0, 0),
+		{},
+	};
+
+	for (const struct midr_range *r = cavium_erratum_27456_cpus; r->model; r++) {
+		if (midr_is_cpu_model_range(read_cpuid_id(), r->model,
+					    r->rv_min, r->rv_max))
+			return false;
+	}
+
+	return true;
+}
+
+asmlinkage void __init early_map_kernel(u64 boot_status, phys_addr_t fdt)
 {
 	static char const chosen_str[] __initconst = "/chosen";
 	u64 va_base, pa_base = (u64)&_text;
@@ -209,15 +246,14 @@ asmlinkage void __init early_map_kernel(u64 boot_status, void *fdt)
 	int root_level = 4 - CONFIG_PGTABLE_LEVELS;
 	int va_bits = VA_BITS;
 	int chosen;
-
-	map_fdt((u64)fdt);
+	void *fdt_mapped = map_fdt(fdt);
 
 	/* Clear BSS and the initial page tables */
-	memset(__bss_start, 0, (u64)init_pg_end - (u64)__bss_start);
+	memset(__bss_start, 0, (char *)init_pg_end - (char *)__bss_start);
 
 	/* Parse the command line for CPU feature overrides */
-	chosen = fdt_path_offset(fdt, chosen_str);
-	init_feature_override(boot_status, fdt, chosen);
+	chosen = fdt_path_offset(fdt_mapped, chosen_str);
+	init_feature_override(boot_status, fdt_mapped, chosen);
 
 	if (IS_ENABLED(CONFIG_ARM64_64K_PAGES) && !cpu_has_lva()) {
 		va_bits = VA_BITS_MIN;
@@ -227,7 +263,7 @@ asmlinkage void __init early_map_kernel(u64 boot_status, void *fdt)
 	}
 
 	if (va_bits > VA_BITS_MIN)
-		sysreg_clear_set(tcr_el1, TCR_T1SZ_MASK, TCR_T1SZ(va_bits));
+		sysreg_clear_set(tcr_el1, TCR_EL1_T1SZ_MASK, TCR_T1SZ(va_bits));
 
 	/*
 	 * The virtual KASLR displacement modulo 2MiB is decided by the
@@ -237,10 +273,10 @@ asmlinkage void __init early_map_kernel(u64 boot_status, void *fdt)
 	 * fill in the high bits from the seed.
 	 */
 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
-		u64 kaslr_seed = kaslr_early_init(fdt, chosen);
+		u64 kaslr_seed = kaslr_early_init(fdt_mapped, chosen);
 
 		if (kaslr_seed && kaslr_requires_kpti())
-			arm64_use_ng_mappings = true;
+			arm64_use_ng_mappings = ng_mappings_allowed();
 
 		kaslr_offset |= kaslr_seed & ~(MIN_KIMG_ALIGN - 1);
 	}
diff --git a/arch/arm64/kernel/pi/map_range.c b/arch/arm64/kernel/pi/map_range.c
index 2b69e3beeef8..de52cd85c691 100644
--- a/arch/arm64/kernel/pi/map_range.c
+++ b/arch/arm64/kernel/pi/map_range.c
@@ -26,12 +26,13 @@
  * @va_offset:		Offset between a physical page and its current mapping
  * 			in the VA space
  */
-void __init map_range(u64 *pte, u64 start, u64 end, u64 pa, pgprot_t prot,
-		      int level, pte_t *tbl, bool may_use_cont, u64 va_offset)
+void __init map_range(phys_addr_t *pte, u64 start, u64 end, phys_addr_t pa,
+		      pgprot_t prot, int level, pte_t *tbl, bool may_use_cont,
+		      u64 va_offset)
 {
 	u64 cmask = (level == 3) ? CONT_PTE_SIZE - 1 : U64_MAX;
-	pteval_t protval = pgprot_val(prot) & ~PTE_TYPE_MASK;
-	int lshift = (3 - level) * (PAGE_SHIFT - 3);
+	ptdesc_t protval = pgprot_val(prot) & ~PTE_TYPE_MASK;
+	int lshift = (3 - level) * PTDESC_TABLE_SHIFT;
 	u64 lmask = (PAGE_SIZE << lshift) - 1;
 
 	start	&= PAGE_MASK;
@@ -45,12 +46,12 @@ void __init map_range(u64 *pte, u64 start, u64 end, u64 pa, pgprot_t prot,
 	 * clearing the mapping
 	 */
 	if (protval)
-		protval |= (level < 3) ? PMD_TYPE_SECT : PTE_TYPE_PAGE;
+		protval |= (level == 2) ? PMD_TYPE_SECT : PTE_TYPE_PAGE;
 
 	while (start < end) {
 		u64 next = min((start | lmask) + 1, PAGE_ALIGN(end));
 
-		if (level < 3 && (start | next | pa) & lmask) {
+		if (level < 2 || (level == 2 && (start | next | pa) & lmask)) {
 			/*
 			 * This chunk needs a finer grained mapping. Create a
 			 * table mapping if necessary and recurse.
@@ -87,19 +88,22 @@ void __init map_range(u64 *pte, u64 start, u64 end, u64 pa, pgprot_t prot,
 	}
 }
 
-asmlinkage u64 __init create_init_idmap(pgd_t *pg_dir, pteval_t clrmask)
+asmlinkage phys_addr_t __init create_init_idmap(pgd_t *pg_dir, ptdesc_t clrmask)
 {
-	u64 ptep = (u64)pg_dir + PAGE_SIZE;
+	phys_addr_t ptep = (phys_addr_t)pg_dir + PAGE_SIZE; /* MMU is off */
 	pgprot_t text_prot = PAGE_KERNEL_ROX;
 	pgprot_t data_prot = PAGE_KERNEL;
 
 	pgprot_val(text_prot) &= ~clrmask;
 	pgprot_val(data_prot) &= ~clrmask;
 
-	map_range(&ptep, (u64)_stext, (u64)__initdata_begin, (u64)_stext,
-		  text_prot, IDMAP_ROOT_LEVEL, (pte_t *)pg_dir, false, 0);
-	map_range(&ptep, (u64)__initdata_begin, (u64)_end, (u64)__initdata_begin,
-		  data_prot, IDMAP_ROOT_LEVEL, (pte_t *)pg_dir, false, 0);
+	/* MMU is off; pointer casts to phys_addr_t are safe */
+	map_range(&ptep, (u64)_stext, (u64)__initdata_begin,
+		  (phys_addr_t)_stext, text_prot, IDMAP_ROOT_LEVEL,
+		  (pte_t *)pg_dir, false, 0);
+	map_range(&ptep, (u64)__initdata_begin, (u64)_end,
+		  (phys_addr_t)__initdata_begin, data_prot, IDMAP_ROOT_LEVEL,
+		  (pte_t *)pg_dir, false, 0);
 
 	return ptep;
 }
diff --git a/arch/arm64/kernel/pi/patch-scs.c b/arch/arm64/kernel/pi/patch-scs.c
index 55d0cd64ef71..bbe7d30ed12b 100644
--- a/arch/arm64/kernel/pi/patch-scs.c
+++ b/arch/arm64/kernel/pi/patch-scs.c
@@ -225,7 +225,7 @@ static int scs_handle_fde_frame(const struct eh_frame *frame,
 	return 0;
 }
 
-int scs_patch(const u8 eh_frame[], int size)
+int scs_patch(const u8 eh_frame[], int size, bool skip_dry_run)
 {
 	int code_alignment_factor = 1;
 	bool fde_use_sdata8 = false;
@@ -277,11 +277,13 @@ int scs_patch(const u8 eh_frame[], int size)
 			}
 		} else {
 			ret = scs_handle_fde_frame(frame, code_alignment_factor,
-						   fde_use_sdata8, true);
+						   fde_use_sdata8, !skip_dry_run);
 			if (ret)
 				return ret;
-			scs_handle_fde_frame(frame, code_alignment_factor,
-					     fde_use_sdata8, false);
+
+			if (!skip_dry_run)
+				scs_handle_fde_frame(frame, code_alignment_factor,
+						     fde_use_sdata8, false);
 		}
 
 		p += sizeof(frame->size) + frame->size;
diff --git a/arch/arm64/kernel/pi/pi.h b/arch/arm64/kernel/pi/pi.h
index c91e5e965cd3..aec3172d4003 100644
--- a/arch/arm64/kernel/pi/pi.h
+++ b/arch/arm64/kernel/pi/pi.h
@@ -22,15 +22,17 @@ static inline void *prel64_to_pointer(const prel64_t *offset)
 extern bool dynamic_scs_is_enabled;
 
 extern pgd_t init_idmap_pg_dir[], init_idmap_pg_end[];
+extern pgd_t init_pg_dir[], init_pg_end[];
 
 void init_feature_override(u64 boot_status, const void *fdt, int chosen);
 u64 kaslr_early_init(void *fdt, int chosen);
 void relocate_kernel(u64 offset);
-int scs_patch(const u8 eh_frame[], int size);
+int scs_patch(const u8 eh_frame[], int size, bool skip_dry_run);
 
-void map_range(u64 *pgd, u64 start, u64 end, u64 pa, pgprot_t prot,
-	       int level, pte_t *tbl, bool may_use_cont, u64 va_offset);
+void map_range(phys_addr_t *pte, u64 start, u64 end, phys_addr_t pa,
+	       pgprot_t prot, int level, pte_t *tbl, bool may_use_cont,
+	       u64 va_offset);
 
-asmlinkage void early_map_kernel(u64 boot_status, void *fdt);
+asmlinkage void early_map_kernel(u64 boot_status, phys_addr_t fdt);
 
-asmlinkage u64 create_init_idmap(pgd_t *pgd, pteval_t clrmask);
+asmlinkage phys_addr_t create_init_idmap(pgd_t *pgd, ptdesc_t clrmask);
diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c
index 6438bf62e753..4137cc5ef031 100644
--- a/arch/arm64/kernel/probes/decode-insn.c
+++ b/arch/arm64/kernel/probes/decode-insn.c
@@ -108,9 +108,10 @@ arm_probe_decode_insn(u32 insn, struct arch_probe_insn *api)
 	    aarch64_insn_is_bl(insn)) {
 		api->handler = simulate_b_bl;
 	} else if (aarch64_insn_is_br(insn) ||
-	    aarch64_insn_is_blr(insn) ||
-	    aarch64_insn_is_ret(insn)) {
-		api->handler = simulate_br_blr_ret;
+		aarch64_insn_is_blr(insn)) {
+		api->handler = simulate_br_blr;
+	} else if (aarch64_insn_is_ret(insn)) {
+		api->handler = simulate_ret;
 	} else {
 		/*
 		 * Instruction cannot be stepped out-of-line and we don't
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index d9e462eafb95..43a0361a8bf0 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -10,6 +10,7 @@
 
 #define pr_fmt(fmt) "kprobes: " fmt
 
+#include <linux/execmem.h>
 #include <linux/extable.h>
 #include <linux/kasan.h>
 #include <linux/kernel.h>
@@ -41,6 +42,20 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 static void __kprobes
 post_kprobe_handler(struct kprobe *, struct kprobe_ctlblk *, struct pt_regs *);
 
+void *alloc_insn_page(void)
+{
+	void *addr;
+
+	addr = execmem_alloc(EXECMEM_KPROBES, PAGE_SIZE);
+	if (!addr)
+		return NULL;
+	if (set_memory_rox((unsigned long)addr, 1)) {
+		execmem_free(addr);
+		return NULL;
+	}
+	return addr;
+}
+
 static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
 {
 	kprobe_opcode_t *addr = p->ainsn.xol_insn;
@@ -292,8 +307,8 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
 	return 0;
 }
 
-static int __kprobes
-kprobe_breakpoint_handler(struct pt_regs *regs, unsigned long esr)
+int __kprobes
+kprobe_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
 	struct kprobe *p, *cur_kprobe;
 	struct kprobe_ctlblk *kcb;
@@ -336,13 +351,8 @@ kprobe_breakpoint_handler(struct pt_regs *regs, unsigned long esr)
 	return DBG_HOOK_HANDLED;
 }
 
-static struct break_hook kprobes_break_hook = {
-	.imm = KPROBES_BRK_IMM,
-	.fn = kprobe_breakpoint_handler,
-};
-
-static int __kprobes
-kprobe_breakpoint_ss_handler(struct pt_regs *regs, unsigned long esr)
+int __kprobes
+kprobe_ss_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 	unsigned long addr = instruction_pointer(regs);
@@ -360,13 +370,8 @@ kprobe_breakpoint_ss_handler(struct pt_regs *regs, unsigned long esr)
 	return DBG_HOOK_ERROR;
 }
 
-static struct break_hook kprobes_break_ss_hook = {
-	.imm = KPROBES_BRK_SS_IMM,
-	.fn = kprobe_breakpoint_ss_handler,
-};
-
-static int __kprobes
-kretprobe_breakpoint_handler(struct pt_regs *regs, unsigned long esr)
+int __kprobes
+kretprobe_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
 	if (regs->pc != (unsigned long)__kretprobe_trampoline)
 		return DBG_HOOK_ERROR;
@@ -375,11 +380,6 @@ kretprobe_breakpoint_handler(struct pt_regs *regs, unsigned long esr)
 	return DBG_HOOK_HANDLED;
 }
 
-static struct break_hook kretprobes_break_hook = {
-	.imm = KRETPROBES_BRK_IMM,
-	.fn = kretprobe_breakpoint_handler,
-};
-
 /*
  * Provide a blacklist of symbols identifying ranges which cannot be kprobed.
  * This blacklist is exposed to userspace via debugfs (kprobes/blacklist).
@@ -422,9 +422,5 @@ int __kprobes arch_trampoline_kprobe(struct kprobe *p)
 
 int __init arch_init_kprobes(void)
 {
-	register_kernel_break_hook(&kprobes_break_hook);
-	register_kernel_break_hook(&kprobes_break_ss_hook);
-	register_kernel_break_hook(&kretprobes_break_hook);
-
 	return 0;
 }
diff --git a/arch/arm64/kernel/probes/kprobes_trampoline.S b/arch/arm64/kernel/probes/kprobes_trampoline.S
index a362f3dbb3d1..b60739d3983f 100644
--- a/arch/arm64/kernel/probes/kprobes_trampoline.S
+++ b/arch/arm64/kernel/probes/kprobes_trampoline.S
@@ -12,7 +12,7 @@
 SYM_CODE_START(__kretprobe_trampoline)
 	/*
 	 * Trigger a breakpoint exception. The PC will be adjusted by
-	 * kretprobe_breakpoint_handler(), and no subsequent instructions will
+	 * kretprobe_brk_handler(), and no subsequent instructions will
 	 * be executed from the trampoline.
 	 */
 	brk #KRETPROBES_BRK_IMM
diff --git a/arch/arm64/kernel/probes/simulate-insn.c b/arch/arm64/kernel/probes/simulate-insn.c
index 4c6d2d712fbd..89fbeb32107e 100644
--- a/arch/arm64/kernel/probes/simulate-insn.c
+++ b/arch/arm64/kernel/probes/simulate-insn.c
@@ -13,6 +13,7 @@
 #include <asm/traps.h>
 
 #include "simulate-insn.h"
+#include "asm/gcs.h"
 
 #define bbl_displacement(insn)		\
 	sign_extend32(((insn) & 0x3ffffff) << 2, 27)
@@ -49,6 +50,21 @@ static inline u32 get_w_reg(struct pt_regs *regs, int reg)
 	return lower_32_bits(pt_regs_read_reg(regs, reg));
 }
 
+static inline int update_lr(struct pt_regs *regs, long addr)
+{
+	int err = 0;
+
+	if (user_mode(regs) && task_gcs_el0_enabled(current)) {
+		push_user_gcs(addr, &err);
+		if (err) {
+			force_sig(SIGSEGV);
+			return err;
+		}
+	}
+	procedure_link_pointer_set(regs, addr);
+	return err;
+}
+
 static bool __kprobes check_cbz(u32 opcode, struct pt_regs *regs)
 {
 	int xn = opcode & 0x1f;
@@ -107,9 +123,9 @@ simulate_b_bl(u32 opcode, long addr, struct pt_regs *regs)
 {
 	int disp = bbl_displacement(opcode);
 
-	/* Link register is x30 */
 	if (opcode & (1 << 31))
-		set_x_reg(regs, 30, addr + 4);
+		if (update_lr(regs, addr + 4))
+			return;
 
 	instruction_pointer_set(regs, addr + disp);
 }
@@ -126,16 +142,34 @@ simulate_b_cond(u32 opcode, long addr, struct pt_regs *regs)
 }
 
 void __kprobes
-simulate_br_blr_ret(u32 opcode, long addr, struct pt_regs *regs)
+simulate_br_blr(u32 opcode, long addr, struct pt_regs *regs)
 {
 	int xn = (opcode >> 5) & 0x1f;
+	u64 b_target = get_x_reg(regs, xn);
 
-	/* update pc first in case we're doing a "blr lr" */
-	instruction_pointer_set(regs, get_x_reg(regs, xn));
-
-	/* Link register is x30 */
 	if (((opcode >> 21) & 0x3) == 1)
-		set_x_reg(regs, 30, addr + 4);
+		if (update_lr(regs, addr + 4))
+			return;
+
+	instruction_pointer_set(regs, b_target);
+}
+
+void __kprobes
+simulate_ret(u32 opcode, long addr, struct pt_regs *regs)
+{
+	u64 ret_addr;
+	int err = 0;
+	int xn = (opcode >> 5) & 0x1f;
+	u64 r_target = get_x_reg(regs, xn);
+
+	if (user_mode(regs) && task_gcs_el0_enabled(current)) {
+		ret_addr = pop_user_gcs(&err);
+		if (err || ret_addr != r_target) {
+			force_sig(SIGSEGV);
+			return;
+		}
+	}
+	instruction_pointer_set(regs, r_target);
 }
 
 void __kprobes
diff --git a/arch/arm64/kernel/probes/simulate-insn.h b/arch/arm64/kernel/probes/simulate-insn.h
index efb2803ec943..9e772a292d56 100644
--- a/arch/arm64/kernel/probes/simulate-insn.h
+++ b/arch/arm64/kernel/probes/simulate-insn.h
@@ -11,7 +11,8 @@
 void simulate_adr_adrp(u32 opcode, long addr, struct pt_regs *regs);
 void simulate_b_bl(u32 opcode, long addr, struct pt_regs *regs);
 void simulate_b_cond(u32 opcode, long addr, struct pt_regs *regs);
-void simulate_br_blr_ret(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_br_blr(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_ret(u32 opcode, long addr, struct pt_regs *regs);
 void simulate_cbz_cbnz(u32 opcode, long addr, struct pt_regs *regs);
 void simulate_tbz_tbnz(u32 opcode, long addr, struct pt_regs *regs);
 void simulate_ldr_literal(u32 opcode, long addr, struct pt_regs *regs);
diff --git a/arch/arm64/kernel/probes/uprobes.c b/arch/arm64/kernel/probes/uprobes.c
index cb3d05af36e3..941668800aea 100644
--- a/arch/arm64/kernel/probes/uprobes.c
+++ b/arch/arm64/kernel/probes/uprobes.c
@@ -6,6 +6,7 @@
 #include <linux/ptrace.h>
 #include <linux/uprobes.h>
 #include <asm/cacheflush.h>
+#include <asm/gcs.h>
 
 #include "decode-insn.h"
 
@@ -130,7 +131,7 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 	struct uprobe_task *utask = current->utask;
 
 	/*
-	 * Task has received a fatal signal, so reset back to probbed
+	 * Task has received a fatal signal, so reset back to probed
 	 * address.
 	 */
 	instruction_pointer_set(regs, utask->vaddr);
@@ -159,11 +160,43 @@ arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr,
 				  struct pt_regs *regs)
 {
 	unsigned long orig_ret_vaddr;
+	unsigned long gcs_ret_vaddr;
+	int err = 0;
+	u64 gcspr;
 
 	orig_ret_vaddr = procedure_link_pointer(regs);
+
+	if (task_gcs_el0_enabled(current)) {
+		gcspr = read_sysreg_s(SYS_GCSPR_EL0);
+		gcs_ret_vaddr = get_user_gcs((__force unsigned long __user *)gcspr, &err);
+		if (err) {
+			force_sig(SIGSEGV);
+			goto out;
+		}
+
+		/*
+		 * If the LR and GCS return addr don't match, then some kind of PAC
+		 * signing or control flow occurred since entering the probed function.
+		 * Likely because the user is attempting to retprobe on an instruction
+		 * that isn't a function boundary or inside a leaf function. Explicitly
+		 * abort this retprobe because it will generate a GCS exception.
+		 */
+		if (gcs_ret_vaddr != orig_ret_vaddr) {
+			orig_ret_vaddr = -1;
+			goto out;
+		}
+
+		put_user_gcs(trampoline_vaddr, (__force unsigned long __user *)gcspr, &err);
+		if (err) {
+			force_sig(SIGSEGV);
+			goto out;
+		}
+	}
+
 	/* Replace the return addr with trampoline addr */
 	procedure_link_pointer_set(regs, trampoline_vaddr);
 
+out:
 	return orig_ret_vaddr;
 }
 
@@ -173,7 +206,7 @@ int arch_uprobe_exception_notify(struct notifier_block *self,
 	return NOTIFY_DONE;
 }
 
-static int uprobe_breakpoint_handler(struct pt_regs *regs,
+int uprobe_brk_handler(struct pt_regs *regs,
 				     unsigned long esr)
 {
 	if (uprobe_pre_sstep_notifier(regs))
@@ -182,7 +215,7 @@ static int uprobe_breakpoint_handler(struct pt_regs *regs,
 	return DBG_HOOK_ERROR;
 }
 
-static int uprobe_single_step_handler(struct pt_regs *regs,
+int uprobe_single_step_handler(struct pt_regs *regs,
 				      unsigned long esr)
 {
 	struct uprobe_task *utask = current->utask;
@@ -194,23 +227,3 @@ static int uprobe_single_step_handler(struct pt_regs *regs,
 	return DBG_HOOK_ERROR;
 }
 
-/* uprobe breakpoint handler hook */
-static struct break_hook uprobes_break_hook = {
-	.imm = UPROBES_BRK_IMM,
-	.fn = uprobe_breakpoint_handler,
-};
-
-/* uprobe single step handler hook */
-static struct step_hook uprobes_step_hook = {
-	.fn = uprobe_single_step_handler,
-};
-
-static int __init arch_init_uprobes(void)
-{
-	register_user_break_hook(&uprobes_break_hook);
-	register_user_step_hook(&uprobes_step_hook);
-
-	return 0;
-}
-
-device_initcall(arch_init_uprobes);
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 2968a33bb3bc..fba7ca102a8c 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -288,7 +288,9 @@ static void flush_gcs(void)
 	if (!system_supports_gcs())
 		return;
 
-	gcs_free(current);
+	current->thread.gcspr_el0 = 0;
+	current->thread.gcs_base = 0;
+	current->thread.gcs_size = 0;
 	current->thread.gcs_el0_mode = 0;
 	write_sysreg_s(GCSCRE0_EL1_nTR, SYS_GCSCRE0_EL1);
 	write_sysreg_s(0, SYS_GCSPR_EL0);
@@ -305,13 +307,13 @@ static int copy_thread_gcs(struct task_struct *p,
 	p->thread.gcs_base = 0;
 	p->thread.gcs_size = 0;
 
+	p->thread.gcs_el0_mode = current->thread.gcs_el0_mode;
+	p->thread.gcs_el0_locked = current->thread.gcs_el0_locked;
+
 	gcs = gcs_alloc_thread_stack(p, args);
 	if (IS_ERR_VALUE(gcs))
 		return PTR_ERR((void *)gcs);
 
-	p->thread.gcs_el0_mode = current->thread.gcs_el0_mode;
-	p->thread.gcs_el0_locked = current->thread.gcs_el0_locked;
-
 	return 0;
 }
 
@@ -339,55 +341,38 @@ void flush_thread(void)
 void arch_release_task_struct(struct task_struct *tsk)
 {
 	fpsimd_release_task(tsk);
-	gcs_free(tsk);
 }
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
-	if (current->mm)
-		fpsimd_preserve_current_state();
+	/*
+	 * The current/src task's FPSIMD state may or may not be live, and may
+	 * have been altered by ptrace after entry to the kernel. Save the
+	 * effective FPSIMD state so that this will be copied into dst.
+	 */
+	fpsimd_save_and_flush_current_state();
+	fpsimd_sync_from_effective_state(src);
+
 	*dst = *src;
 
 	/*
-	 * Detach src's sve_state (if any) from dst so that it does not
-	 * get erroneously used or freed prematurely.  dst's copies
-	 * will be allocated on demand later on if dst uses SVE.
-	 * For consistency, also clear TIF_SVE here: this could be done
-	 * later in copy_process(), but to avoid tripping up future
-	 * maintainers it is best not to leave TIF flags and buffers in
-	 * an inconsistent state, even temporarily.
+	 * Drop stale reference to src's sve_state and convert dst to
+	 * non-streaming FPSIMD mode.
 	 */
+	dst->thread.fp_type = FP_STATE_FPSIMD;
 	dst->thread.sve_state = NULL;
 	clear_tsk_thread_flag(dst, TIF_SVE);
+	task_smstop_sm(dst);
 
 	/*
-	 * In the unlikely event that we create a new thread with ZA
-	 * enabled we should retain the ZA and ZT state so duplicate
-	 * it here.  This may be shortly freed if we exec() or if
-	 * CLONE_SETTLS but it's simpler to do it here. To avoid
-	 * confusing the rest of the code ensure that we have a
-	 * sve_state allocated whenever sme_state is allocated.
+	 * Drop stale reference to src's sme_state and ensure dst has ZA
+	 * disabled.
+	 *
+	 * When necessary, ZA will be inherited later in copy_thread_za().
 	 */
-	if (thread_za_enabled(&src->thread)) {
-		dst->thread.sve_state = kzalloc(sve_state_size(src),
-						GFP_KERNEL);
-		if (!dst->thread.sve_state)
-			return -ENOMEM;
-
-		dst->thread.sme_state = kmemdup(src->thread.sme_state,
-						sme_state_size(src),
-						GFP_KERNEL);
-		if (!dst->thread.sme_state) {
-			kfree(dst->thread.sve_state);
-			dst->thread.sve_state = NULL;
-			return -ENOMEM;
-		}
-	} else {
-		dst->thread.sme_state = NULL;
-		clear_tsk_thread_flag(dst, TIF_SME);
-	}
-
-	dst->thread.fp_type = FP_STATE_FPSIMD;
+	dst->thread.sme_state = NULL;
+	clear_tsk_thread_flag(dst, TIF_SME);
+	dst->thread.svcr &= ~SVCR_ZA_MASK;
 
 	/* clear any pending asynchronous tag fault raised by the parent */
 	clear_tsk_thread_flag(dst, TIF_MTE_ASYNC_FAULT);
@@ -395,11 +380,36 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	return 0;
 }
 
+static int copy_thread_za(struct task_struct *dst, struct task_struct *src)
+{
+	if (!thread_za_enabled(&src->thread))
+		return 0;
+
+	dst->thread.sve_state = kzalloc(sve_state_size(src),
+					GFP_KERNEL);
+	if (!dst->thread.sve_state)
+		return -ENOMEM;
+
+	dst->thread.sme_state = kmemdup(src->thread.sme_state,
+					sme_state_size(src),
+					GFP_KERNEL);
+	if (!dst->thread.sme_state) {
+		kfree(dst->thread.sve_state);
+		dst->thread.sve_state = NULL;
+		return -ENOMEM;
+	}
+
+	set_tsk_thread_flag(dst, TIF_SME);
+	dst->thread.svcr |= SVCR_ZA_MASK;
+
+	return 0;
+}
+
 asmlinkage void ret_from_fork(void) asm("ret_from_fork");
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long stack_start = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *childregs = task_pt_regs(p);
@@ -427,8 +437,6 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		 * out-of-sync with the saved value.
 		 */
 		*task_user_tls(p) = read_sysreg(tpidr_el0);
-		if (system_supports_tpidr2())
-			p->thread.tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
 
 		if (system_supports_poe())
 			p->thread.por_el0 = read_sysreg_s(SYS_POR_EL0);
@@ -441,13 +449,39 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		}
 
 		/*
+		 * Due to the AAPCS64 "ZA lazy saving scheme", PSTATE.ZA and
+		 * TPIDR2 need to be manipulated as a pair, and either both
+		 * need to be inherited or both need to be reset.
+		 *
+		 * Within a process, child threads must not inherit their
+		 * parent's TPIDR2 value or they may clobber their parent's
+		 * stack at some later point.
+		 *
+		 * When a process is fork()'d, the child must inherit ZA and
+		 * TPIDR2 from its parent in case there was dormant ZA state.
+		 *
+		 * Use CLONE_VM to determine when the child will share the
+		 * address space with the parent, and cannot safely inherit the
+		 * state.
+		 */
+		if (system_supports_sme()) {
+			if (!(clone_flags & CLONE_VM)) {
+				p->thread.tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
+				ret = copy_thread_za(p, current);
+				if (ret)
+					return ret;
+			} else {
+				p->thread.tpidr2_el0 = 0;
+				WARN_ON_ONCE(p->thread.svcr & SVCR_ZA_MASK);
+			}
+		}
+
+		/*
 		 * If a TLS pointer was passed to clone, use it for the new
-		 * thread.  We also reset TPIDR2 if it's in use.
+		 * thread.
 		 */
-		if (clone_flags & CLONE_SETTLS) {
+		if (clone_flags & CLONE_SETTLS)
 			p->thread.uw.tp_value = tls;
-			p->thread.tpidr2_el0 = 0;
-		}
 
 		ret = copy_thread_gcs(p, args);
 		if (ret != 0)
@@ -638,6 +672,11 @@ static void permission_overlay_switch(struct task_struct *next)
 	current->thread.por_el0 = read_sysreg_s(SYS_POR_EL0);
 	if (current->thread.por_el0 != next->thread.por_el0) {
 		write_sysreg_s(next->thread.por_el0, SYS_POR_EL0);
+		/*
+		 * No ISB required as we can tolerate spurious Overlay faults -
+		 * the fault handler will check again based on the new value
+		 * of POR_EL0.
+		 */
 	}
 }
 
@@ -680,10 +719,11 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	gcs_thread_switch(next);
 
 	/*
-	 * Complete any pending TLB or cache maintenance on this CPU in case
-	 * the thread migrates to a different CPU.
-	 * This full barrier is also required by the membarrier system
-	 * call.
+	 * Complete any pending TLB or cache maintenance on this CPU in case the
+	 * thread migrates to a different CPU. This full barrier is also
+	 * required by the membarrier system call. Additionally it makes any
+	 * in-progress pgtable writes visible to the table walker; See
+	 * emit_pte_barriers().
 	 */
 	dsb(ish);
 
@@ -815,10 +855,14 @@ long set_tagged_addr_ctrl(struct task_struct *task, unsigned long arg)
 	if (is_compat_thread(ti))
 		return -EINVAL;
 
-	if (system_supports_mte())
+	if (system_supports_mte()) {
 		valid_mask |= PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC \
 			| PR_MTE_TAG_MASK;
 
+		if (cpus_have_cap(ARM64_MTE_STORE_ONLY))
+			valid_mask |= PR_MTE_STORE_ONLY;
+	}
+
 	if (arg & ~valid_mask)
 		return -EINVAL;
 
@@ -859,7 +903,7 @@ long get_tagged_addr_ctrl(struct task_struct *task)
  * disable it for tasks that already opted in to the relaxed ABI.
  */
 
-static struct ctl_table tagged_addr_sysctl_table[] = {
+static const struct ctl_table tagged_addr_sysctl_table[] = {
 	{
 		.procname	= "tagged_addr_disabled",
 		.mode		= 0644,
diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c
index da53722f95d4..80a580e019c5 100644
--- a/arch/arm64/kernel/proton-pack.c
+++ b/arch/arm64/kernel/proton-pack.c
@@ -91,12 +91,7 @@ early_param("nospectre_v2", parse_spectre_v2_param);
 
 static bool spectre_v2_mitigations_off(void)
 {
-	bool ret = __nospectre_v2 || cpu_mitigations_off();
-
-	if (ret)
-		pr_info_once("spectre-v2 mitigation disabled by command line option\n");
-
-	return ret;
+	return __nospectre_v2 || cpu_mitigations_off();
 }
 
 static const char *get_bhb_affected_string(enum mitigation_state bhb_state)
@@ -172,7 +167,7 @@ static enum mitigation_state spectre_v2_get_cpu_hw_mitigation_state(void)
 		return SPECTRE_UNAFFECTED;
 
 	/* Alternatively, we have a list of unaffected CPUs */
-	if (is_midr_in_range_list(read_cpuid_id(), spectre_v2_safe_list))
+	if (is_midr_in_range_list(spectre_v2_safe_list))
 		return SPECTRE_UNAFFECTED;
 
 	return SPECTRE_VULNERABLE;
@@ -331,7 +326,7 @@ bool has_spectre_v3a(const struct arm64_cpu_capabilities *entry, int scope)
 	};
 
 	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
-	return is_midr_in_range_list(read_cpuid_id(), spectre_v3a_unsafe_list);
+	return is_midr_in_range_list(spectre_v3a_unsafe_list);
 }
 
 void spectre_v3a_enable_mitigation(const struct arm64_cpu_capabilities *__unused)
@@ -421,13 +416,8 @@ early_param("ssbd", parse_spectre_v4_param);
  */
 static bool spectre_v4_mitigations_off(void)
 {
-	bool ret = cpu_mitigations_off() ||
-		   __spectre_v4_policy == SPECTRE_V4_POLICY_MITIGATION_DISABLED;
-
-	if (ret)
-		pr_info_once("spectre-v4 mitigation disabled by command-line option\n");
-
-	return ret;
+	return cpu_mitigations_off() ||
+	       __spectre_v4_policy == SPECTRE_V4_POLICY_MITIGATION_DISABLED;
 }
 
 /* Do we need to toggle the mitigation state on entry to/exit from the kernel? */
@@ -475,7 +465,7 @@ static enum mitigation_state spectre_v4_get_cpu_hw_mitigation_state(void)
 		{ /* sentinel */ },
 	};
 
-	if (is_midr_in_range_list(read_cpuid_id(), spectre_v4_safe_list))
+	if (is_midr_in_range_list(spectre_v4_safe_list))
 		return SPECTRE_UNAFFECTED;
 
 	/* CPU features are detected first */
@@ -845,52 +835,91 @@ static unsigned long system_bhb_mitigations;
  * This must be called with SCOPE_LOCAL_CPU for each type of CPU, before any
  * SCOPE_SYSTEM call will give the right answer.
  */
-u8 spectre_bhb_loop_affected(int scope)
+static bool is_spectre_bhb_safe(int scope)
+{
+	static const struct midr_range spectre_bhb_safe_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A510),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A520),
+		MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_SILVER),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
+		{},
+	};
+	static bool all_safe = true;
+
+	if (scope != SCOPE_LOCAL_CPU)
+		return all_safe;
+
+	if (is_midr_in_range_list(spectre_bhb_safe_list))
+		return true;
+
+	all_safe = false;
+
+	return false;
+}
+
+static u8 spectre_bhb_loop_affected(void)
 {
 	u8 k = 0;
-	static u8 max_bhb_k;
-
-	if (scope == SCOPE_LOCAL_CPU) {
-		static const struct midr_range spectre_bhb_k32_list[] = {
-			MIDR_ALL_VERSIONS(MIDR_CORTEX_A78),
-			MIDR_ALL_VERSIONS(MIDR_CORTEX_A78AE),
-			MIDR_ALL_VERSIONS(MIDR_CORTEX_A78C),
-			MIDR_ALL_VERSIONS(MIDR_CORTEX_X1),
-			MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
-			MIDR_ALL_VERSIONS(MIDR_CORTEX_X2),
-			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
-			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
-			{},
-		};
-		static const struct midr_range spectre_bhb_k24_list[] = {
-			MIDR_ALL_VERSIONS(MIDR_CORTEX_A76),
-			MIDR_ALL_VERSIONS(MIDR_CORTEX_A77),
-			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
-			{},
-		};
-		static const struct midr_range spectre_bhb_k11_list[] = {
-			MIDR_ALL_VERSIONS(MIDR_AMPERE1),
-			{},
-		};
-		static const struct midr_range spectre_bhb_k8_list[] = {
-			MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
-			MIDR_ALL_VERSIONS(MIDR_CORTEX_A57),
-			{},
-		};
-
-		if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k32_list))
-			k = 32;
-		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k24_list))
-			k = 24;
-		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k11_list))
-			k = 11;
-		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k8_list))
-			k =  8;
-
-		max_bhb_k = max(max_bhb_k, k);
-	} else {
-		k = max_bhb_k;
-	}
+
+	static const struct midr_range spectre_bhb_k132_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_X3),
+		MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V2),
+		{},
+	};
+	static const struct midr_range spectre_bhb_k38_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A715),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A720),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A720AE),
+		{},
+	};
+	static const struct midr_range spectre_bhb_k32_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A78),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A78AE),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A78C),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_X1),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_X1C),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_X2),
+		MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+		MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
+		{},
+	};
+	static const struct midr_range spectre_bhb_k24_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A76),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A76AE),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A77),
+		MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_GOLD),
+		MIDR_ALL_VERSIONS(MIDR_HISI_HIP09),
+		{},
+	};
+	static const struct midr_range spectre_bhb_k11_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_AMPERE1),
+		{},
+	};
+	static const struct midr_range spectre_bhb_k8_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A57),
+		{},
+	};
+
+	if (is_midr_in_range_list(spectre_bhb_k132_list))
+		k = 132;
+	else if (is_midr_in_range_list(spectre_bhb_k38_list))
+		k = 38;
+	else if (is_midr_in_range_list(spectre_bhb_k32_list))
+		k = 32;
+	else if (is_midr_in_range_list(spectre_bhb_k24_list))
+		k = 24;
+	else if (is_midr_in_range_list(spectre_bhb_k11_list))
+		k = 11;
+	else if (is_midr_in_range_list(spectre_bhb_k8_list))
+		k =  8;
 
 	return k;
 }
@@ -916,29 +945,13 @@ static enum mitigation_state spectre_bhb_get_cpu_fw_mitigation_state(void)
 	}
 }
 
-static bool is_spectre_bhb_fw_affected(int scope)
+static bool has_spectre_bhb_fw_mitigation(void)
 {
-	static bool system_affected;
 	enum mitigation_state fw_state;
 	bool has_smccc = arm_smccc_1_1_get_conduit() != SMCCC_CONDUIT_NONE;
-	static const struct midr_range spectre_bhb_firmware_mitigated_list[] = {
-		MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
-		MIDR_ALL_VERSIONS(MIDR_CORTEX_A75),
-		{},
-	};
-	bool cpu_in_list = is_midr_in_range_list(read_cpuid_id(),
-					 spectre_bhb_firmware_mitigated_list);
-
-	if (scope != SCOPE_LOCAL_CPU)
-		return system_affected;
 
 	fw_state = spectre_bhb_get_cpu_fw_mitigation_state();
-	if (cpu_in_list || (has_smccc && fw_state == SPECTRE_MITIGATED)) {
-		system_affected = true;
-		return true;
-	}
-
-	return false;
+	return has_smccc && fw_state == SPECTRE_MITIGATED;
 }
 
 static bool supports_ecbhb(int scope)
@@ -954,6 +967,8 @@ static bool supports_ecbhb(int scope)
 						    ID_AA64MMFR1_EL1_ECBHB_SHIFT);
 }
 
+static u8 max_bhb_k;
+
 bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry,
 			     int scope)
 {
@@ -962,16 +977,23 @@ bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry,
 	if (supports_csv2p3(scope))
 		return false;
 
-	if (supports_clearbhb(scope))
-		return true;
+	if (is_spectre_bhb_safe(scope))
+		return false;
 
-	if (spectre_bhb_loop_affected(scope))
-		return true;
+	/*
+	 * At this point the core isn't known to be "safe" so we're going to
+	 * assume it's vulnerable. We still need to update `max_bhb_k` though,
+	 * but only if we aren't mitigating with clearbhb though.
+	 */
+	if (scope == SCOPE_LOCAL_CPU && !supports_clearbhb(SCOPE_LOCAL_CPU))
+		max_bhb_k = max(max_bhb_k, spectre_bhb_loop_affected());
 
-	if (is_spectre_bhb_fw_affected(scope))
-		return true;
+	return true;
+}
 
-	return false;
+u8 get_spectre_bhb_loop_value(void)
+{
+	return max_bhb_k;
 }
 
 static void this_cpu_set_vectors(enum arm64_bp_harden_el1_vectors slot)
@@ -991,7 +1013,7 @@ static void this_cpu_set_vectors(enum arm64_bp_harden_el1_vectors slot)
 	isb();
 }
 
-static bool __read_mostly __nospectre_bhb;
+bool __read_mostly __nospectre_bhb;
 static int __init parse_spectre_bhb_param(char *str)
 {
 	__nospectre_bhb = true;
@@ -1002,7 +1024,7 @@ early_param("nospectre_bhb", parse_spectre_bhb_param);
 void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *entry)
 {
 	bp_hardening_cb_t cpu_cb;
-	enum mitigation_state fw_state, state = SPECTRE_VULNERABLE;
+	enum mitigation_state state = SPECTRE_VULNERABLE;
 	struct bp_hardening_data *data = this_cpu_ptr(&bp_hardening_data);
 
 	if (!is_spectre_bhb_affected(entry, SCOPE_LOCAL_CPU))
@@ -1011,9 +1033,7 @@ void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *entry)
 	if (arm64_get_spectre_v2_state() == SPECTRE_VULNERABLE) {
 		/* No point mitigating Spectre-BHB alone. */
 	} else if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY)) {
-		pr_info_once("spectre-bhb mitigation disabled by compile time option\n");
-	} else if (cpu_mitigations_off() || __nospectre_bhb) {
-		pr_info_once("spectre-bhb mitigation disabled by command line option\n");
+		/* Do nothing */
 	} else if (supports_ecbhb(SCOPE_LOCAL_CPU)) {
 		state = SPECTRE_MITIGATED;
 		set_bit(BHB_HW, &system_bhb_mitigations);
@@ -1028,7 +1048,7 @@ void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *entry)
 		this_cpu_set_vectors(EL1_VECTOR_BHB_CLEAR_INSN);
 		state = SPECTRE_MITIGATED;
 		set_bit(BHB_INSN, &system_bhb_mitigations);
-	} else if (spectre_bhb_loop_affected(SCOPE_LOCAL_CPU)) {
+	} else if (spectre_bhb_loop_affected()) {
 		/*
 		 * Ensure KVM uses the indirect vector which will have the
 		 * branchy-loop added. A57/A72-r0 will already have selected
@@ -1041,37 +1061,39 @@ void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *entry)
 		this_cpu_set_vectors(EL1_VECTOR_BHB_LOOP);
 		state = SPECTRE_MITIGATED;
 		set_bit(BHB_LOOP, &system_bhb_mitigations);
-	} else if (is_spectre_bhb_fw_affected(SCOPE_LOCAL_CPU)) {
-		fw_state = spectre_bhb_get_cpu_fw_mitigation_state();
-		if (fw_state == SPECTRE_MITIGATED) {
-			/*
-			 * Ensure KVM uses one of the spectre bp_hardening
-			 * vectors. The indirect vector doesn't include the EL3
-			 * call, so needs upgrading to
-			 * HYP_VECTOR_SPECTRE_INDIRECT.
-			 */
-			if (!data->slot || data->slot == HYP_VECTOR_INDIRECT)
-				data->slot += 1;
-
-			this_cpu_set_vectors(EL1_VECTOR_BHB_FW);
-
-			/*
-			 * The WA3 call in the vectors supersedes the WA1 call
-			 * made during context-switch. Uninstall any firmware
-			 * bp_hardening callback.
-			 */
-			cpu_cb = spectre_v2_get_sw_mitigation_cb();
-			if (__this_cpu_read(bp_hardening_data.fn) != cpu_cb)
-				__this_cpu_write(bp_hardening_data.fn, NULL);
-
-			state = SPECTRE_MITIGATED;
-			set_bit(BHB_FW, &system_bhb_mitigations);
-		}
+	} else if (has_spectre_bhb_fw_mitigation()) {
+		/*
+		 * Ensure KVM uses one of the spectre bp_hardening
+		 * vectors. The indirect vector doesn't include the EL3
+		 * call, so needs upgrading to
+		 * HYP_VECTOR_SPECTRE_INDIRECT.
+		 */
+		if (!data->slot || data->slot == HYP_VECTOR_INDIRECT)
+			data->slot += 1;
+
+		this_cpu_set_vectors(EL1_VECTOR_BHB_FW);
+
+		/*
+		 * The WA3 call in the vectors supersedes the WA1 call
+		 * made during context-switch. Uninstall any firmware
+		 * bp_hardening callback.
+		 */
+		cpu_cb = spectre_v2_get_sw_mitigation_cb();
+		if (__this_cpu_read(bp_hardening_data.fn) != cpu_cb)
+			__this_cpu_write(bp_hardening_data.fn, NULL);
+
+		state = SPECTRE_MITIGATED;
+		set_bit(BHB_FW, &system_bhb_mitigations);
 	}
 
 	update_mitigation_state(&spectre_bhb_state, state);
 }
 
+bool is_spectre_bhb_fw_mitigated(void)
+{
+	return test_bit(BHB_FW, &system_bhb_mitigations);
+}
+
 /* Patched to NOP when enabled */
 void noinstr spectre_bhb_patch_loop_mitigation_enable(struct alt_instr *alt,
 						     __le32 *origptr,
@@ -1100,7 +1122,6 @@ void noinstr spectre_bhb_patch_loop_iter(struct alt_instr *alt,
 {
 	u8 rd;
 	u32 insn;
-	u16 loop_count = spectre_bhb_loop_affected(SCOPE_SYSTEM);
 
 	BUG_ON(nr_inst != 1); /* MOV -> MOV */
 
@@ -1109,7 +1130,7 @@ void noinstr spectre_bhb_patch_loop_iter(struct alt_instr *alt,
 
 	insn = le32_to_cpu(*origptr);
 	rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD, insn);
-	insn = aarch64_insn_gen_movewide(rd, loop_count, 0,
+	insn = aarch64_insn_gen_movewide(rd, max_bhb_k, 0,
 					 AARCH64_INSN_VARIANT_64BIT,
 					 AARCH64_INSN_MOVEWIDE_ZERO);
 	*updptr++ = cpu_to_le32(insn);
@@ -1166,3 +1187,18 @@ void unpriv_ebpf_notify(int new_state)
 		pr_err("WARNING: %s", EBPF_WARN);
 }
 #endif
+
+void spectre_print_disabled_mitigations(void)
+{
+	/* Keep a single copy of the common message suffix to avoid duplication. */
+	const char *spectre_disabled_suffix = "mitigation disabled by command-line option\n";
+
+	if (spectre_v2_mitigations_off())
+		pr_info("spectre-v2 %s", spectre_disabled_suffix);
+
+	if (spectre_v4_mitigations_off())
+		pr_info("spectre-v4 %s", spectre_disabled_suffix);
+
+	if (__nospectre_bhb || cpu_mitigations_off())
+		pr_info("spectre-bhb %s", spectre_disabled_suffix);
+}
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index e4437f62a2cd..b9bdd83fbbca 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -141,7 +141,7 @@ unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
 
 	addr += n;
 	if (regs_within_kernel_stack(regs, (unsigned long)addr))
-		return *addr;
+		return READ_ONCE_NOCHECK(*addr);
 	else
 		return 0;
 }
@@ -594,7 +594,7 @@ static int __fpr_get(struct task_struct *target,
 {
 	struct user_fpsimd_state *uregs;
 
-	sve_sync_to_fpsimd(target);
+	fpsimd_sync_from_effective_state(target);
 
 	uregs = &target->thread.uw.fpsimd_state;
 
@@ -626,7 +626,7 @@ static int __fpr_set(struct task_struct *target,
 	 * Ensure target->thread.uw.fpsimd_state is up to date, so that a
 	 * short copyin can't resurrect stale data.
 	 */
-	sve_sync_to_fpsimd(target);
+	fpsimd_sync_from_effective_state(target);
 
 	newstate = target->thread.uw.fpsimd_state;
 
@@ -653,7 +653,7 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 	if (ret)
 		return ret;
 
-	sve_sync_from_fpsimd_zeropad(target);
+	fpsimd_sync_to_effective_state_zeropad(target);
 	fpsimd_flush_task_state(target);
 
 	return ret;
@@ -720,6 +720,8 @@ static int fpmr_set(struct task_struct *target, const struct user_regset *regset
 	if (!system_supports_fpmr())
 		return -EINVAL;
 
+	fpmr = target->thread.uw.fpmr;
+
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fpmr, 0, count);
 	if (ret)
 		return ret;
@@ -773,6 +775,11 @@ static void sve_init_header_from_task(struct user_sve_header *header,
 		task_type = ARM64_VEC_SVE;
 	active = (task_type == type);
 
+	if (active && target->thread.fp_type == FP_STATE_SVE)
+		header->flags = SVE_PT_REGS_SVE;
+	else
+		header->flags = SVE_PT_REGS_FPSIMD;
+
 	switch (type) {
 	case ARM64_VEC_SVE:
 		if (test_tsk_thread_flag(target, TIF_SVE_VL_INHERIT))
@@ -787,19 +794,14 @@ static void sve_init_header_from_task(struct user_sve_header *header,
 		return;
 	}
 
-	if (active) {
-		if (target->thread.fp_type == FP_STATE_FPSIMD) {
-			header->flags |= SVE_PT_REGS_FPSIMD;
-		} else {
-			header->flags |= SVE_PT_REGS_SVE;
-		}
-	}
-
 	header->vl = task_get_vl(target, type);
 	vq = sve_vq_from_vl(header->vl);
 
 	header->max_vl = vec_max_vl(type);
-	header->size = SVE_PT_SIZE(vq, header->flags);
+	if (active)
+		header->size = SVE_PT_SIZE(vq, header->flags);
+	else
+		header->size = sizeof(header);
 	header->max_size = SVE_PT_SIZE(sve_vq_from_vl(header->max_vl),
 				      SVE_PT_REGS_SVE);
 }
@@ -818,18 +820,25 @@ static int sve_get_common(struct task_struct *target,
 	unsigned int vq;
 	unsigned long start, end;
 
+	if (target == current)
+		fpsimd_preserve_current_state();
+
 	/* Header */
 	sve_init_header_from_task(&header, target, type);
 	vq = sve_vq_from_vl(header.vl);
 
 	membuf_write(&to, &header, sizeof(header));
 
-	if (target == current)
-		fpsimd_preserve_current_state();
-
 	BUILD_BUG_ON(SVE_PT_FPSIMD_OFFSET != sizeof(header));
 	BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
 
+	/*
+	 * When the requested vector type is not active, do not present data
+	 * from the other mode to userspace.
+	 */
+	if (header.size == sizeof(header))
+		return 0;
+
 	switch ((header.flags & SVE_PT_REGS_MASK)) {
 	case SVE_PT_REGS_FPSIMD:
 		return __fpr_get(target, regset, to);
@@ -857,7 +866,7 @@ static int sve_get_common(struct task_struct *target,
 		return membuf_zero(&to, end - start);
 
 	default:
-		return 0;
+		BUILD_BUG();
 	}
 }
 
@@ -881,6 +890,9 @@ static int sve_set_common(struct task_struct *target,
 	struct user_sve_header header;
 	unsigned int vq;
 	unsigned long start, end;
+	bool fpsimd;
+
+	fpsimd_flush_task_state(target);
 
 	/* Header */
 	if (count < sizeof(header))
@@ -888,16 +900,65 @@ static int sve_set_common(struct task_struct *target,
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &header,
 				 0, sizeof(header));
 	if (ret)
-		goto out;
+		return ret;
 
 	/*
-	 * Apart from SVE_PT_REGS_MASK, all SVE_PT_* flags are consumed by
-	 * vec_set_vector_length(), which will also validate them for us:
+	 * Streaming SVE data is always stored and presented in SVE format.
+	 * Require the user to provide SVE formatted data for consistency, and
+	 * to avoid the risk that we configure the task into an invalid state.
 	 */
-	ret = vec_set_vector_length(target, type, header.vl,
-		((unsigned long)header.flags & ~SVE_PT_REGS_MASK) << 16);
-	if (ret)
-		goto out;
+	fpsimd = (header.flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD;
+	if (fpsimd && type == ARM64_VEC_SME)
+		return -EINVAL;
+
+	/*
+	 * On systems without SVE we accept FPSIMD format writes with
+	 * a VL of 0 to allow exiting streaming mode, otherwise a VL
+	 * is required.
+	 */
+	if (header.vl) {
+		/*
+		 * If the system does not support SVE we can't
+		 * configure a SVE VL.
+		 */
+		if (!system_supports_sve() && type == ARM64_VEC_SVE)
+			return -EINVAL;
+
+		/*
+		 * Apart from SVE_PT_REGS_MASK, all SVE_PT_* flags are
+		 * consumed by vec_set_vector_length(), which will
+		 * also validate them for us:
+		 */
+		ret = vec_set_vector_length(target, type, header.vl,
+					    ((unsigned long)header.flags & ~SVE_PT_REGS_MASK) << 16);
+		if (ret)
+			return ret;
+	} else {
+		/* If the system supports SVE we require a VL. */
+		if (system_supports_sve())
+			return -EINVAL;
+
+		/*
+		 * Only FPSIMD formatted data with no flags set is
+		 * supported.
+		 */
+		if (header.flags != SVE_PT_REGS_FPSIMD)
+			return -EINVAL;
+	}
+
+	/* Allocate SME storage if necessary, preserving any existing ZA/ZT state */
+	if (type == ARM64_VEC_SME) {
+		sme_alloc(target, false);
+		if (!target->thread.sme_state)
+			return -ENOMEM;
+	}
+
+	/* Allocate SVE storage if necessary, zeroing any existing SVE state */
+	if (!fpsimd) {
+		sve_alloc(target, true);
+		if (!target->thread.sve_state)
+			return -ENOMEM;
+	}
 
 	/*
 	 * Actual VL set may be different from what the user asked
@@ -908,81 +969,47 @@ static int sve_set_common(struct task_struct *target,
 
 	/* Enter/exit streaming mode */
 	if (system_supports_sme()) {
-		u64 old_svcr = target->thread.svcr;
-
 		switch (type) {
 		case ARM64_VEC_SVE:
 			target->thread.svcr &= ~SVCR_SM_MASK;
+			set_tsk_thread_flag(target, TIF_SVE);
 			break;
 		case ARM64_VEC_SME:
 			target->thread.svcr |= SVCR_SM_MASK;
-
-			/*
-			 * Disable traps and ensure there is SME storage but
-			 * preserve any currently set values in ZA/ZT.
-			 */
-			sme_alloc(target, false);
 			set_tsk_thread_flag(target, TIF_SME);
 			break;
 		default:
 			WARN_ON_ONCE(1);
-			ret = -EINVAL;
-			goto out;
+			return -EINVAL;
 		}
-
-		/*
-		 * If we switched then invalidate any existing SVE
-		 * state and ensure there's storage.
-		 */
-		if (target->thread.svcr != old_svcr)
-			sve_alloc(target, true);
 	}
 
+	/* Always zero V regs, FPSR, and FPCR */
+	memset(&current->thread.uw.fpsimd_state, 0,
+	       sizeof(current->thread.uw.fpsimd_state));
+
 	/* Registers: FPSIMD-only case */
 
 	BUILD_BUG_ON(SVE_PT_FPSIMD_OFFSET != sizeof(header));
-	if ((header.flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD) {
-		ret = __fpr_set(target, regset, pos, count, kbuf, ubuf,
-				SVE_PT_FPSIMD_OFFSET);
+	if (fpsimd) {
 		clear_tsk_thread_flag(target, TIF_SVE);
 		target->thread.fp_type = FP_STATE_FPSIMD;
-		goto out;
+		ret = __fpr_set(target, regset, pos, count, kbuf, ubuf,
+				SVE_PT_FPSIMD_OFFSET);
+		return ret;
 	}
 
-	/*
-	 * Otherwise: no registers or full SVE case.  For backwards
-	 * compatibility reasons we treat empty flags as SVE registers.
-	 */
+	/* Otherwise: no registers or full SVE case. */
+
+	target->thread.fp_type = FP_STATE_SVE;
 
 	/*
 	 * If setting a different VL from the requested VL and there is
 	 * register data, the data layout will be wrong: don't even
 	 * try to set the registers in this case.
 	 */
-	if (count && vq != sve_vq_from_vl(header.vl)) {
-		ret = -EIO;
-		goto out;
-	}
-
-	sve_alloc(target, true);
-	if (!target->thread.sve_state) {
-		ret = -ENOMEM;
-		clear_tsk_thread_flag(target, TIF_SVE);
-		target->thread.fp_type = FP_STATE_FPSIMD;
-		goto out;
-	}
-
-	/*
-	 * Ensure target->thread.sve_state is up to date with target's
-	 * FPSIMD regs, so that a short copyin leaves trailing
-	 * registers unmodified.  Only enable SVE if we are
-	 * configuring normal SVE, a system with streaming SVE may not
-	 * have normal SVE.
-	 */
-	fpsimd_sync_to_sve(target);
-	if (type == ARM64_VEC_SVE)
-		set_tsk_thread_flag(target, TIF_SVE);
-	target->thread.fp_type = FP_STATE_SVE;
+	if (count && vq != sve_vq_from_vl(header.vl))
+		return -EIO;
 
 	BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
 	start = SVE_PT_SVE_OFFSET;
@@ -991,7 +1018,7 @@ static int sve_set_common(struct task_struct *target,
 				 target->thread.sve_state,
 				 start, end);
 	if (ret)
-		goto out;
+		return ret;
 
 	start = end;
 	end = SVE_PT_SVE_FPSR_OFFSET(vq);
@@ -1007,8 +1034,6 @@ static int sve_set_common(struct task_struct *target,
 				 &target->thread.uw.fpsimd_state.fpsr,
 				 start, end);
 
-out:
-	fpsimd_flush_task_state(target);
 	return ret;
 }
 
@@ -1017,7 +1042,7 @@ static int sve_set(struct task_struct *target,
 		   unsigned int pos, unsigned int count,
 		   const void *kbuf, const void __user *ubuf)
 {
-	if (!system_supports_sve())
+	if (!system_supports_sve() && !system_supports_sme())
 		return -EINVAL;
 
 	return sve_set_common(target, regset, pos, count, kbuf, ubuf,
@@ -1427,7 +1452,7 @@ static int tagged_addr_ctrl_get(struct task_struct *target,
 {
 	long ctrl = get_tagged_addr_ctrl(target);
 
-	if (IS_ERR_VALUE(ctrl))
+	if (WARN_ON_ONCE(IS_ERR_VALUE(ctrl)))
 		return ctrl;
 
 	return membuf_write(&to, &ctrl, sizeof(ctrl));
@@ -1441,6 +1466,10 @@ static int tagged_addr_ctrl_set(struct task_struct *target, const struct
 	int ret;
 	long ctrl;
 
+	ctrl = get_tagged_addr_ctrl(target);
+	if (WARN_ON_ONCE(IS_ERR_VALUE(ctrl)))
+		return ctrl;
+
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ctrl, 0, -1);
 	if (ret)
 		return ret;
@@ -1472,6 +1501,8 @@ static int poe_set(struct task_struct *target, const struct
 	if (!system_supports_poe())
 		return -EINVAL;
 
+	ctrl = target->thread.por_el0;
+
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ctrl, 0, -1);
 	if (ret)
 		return ret;
@@ -1483,6 +1514,22 @@ static int poe_set(struct task_struct *target, const struct
 #endif
 
 #ifdef CONFIG_ARM64_GCS
+static void task_gcs_to_user(struct user_gcs *user_gcs,
+			     const struct task_struct *target)
+{
+	user_gcs->features_enabled = target->thread.gcs_el0_mode;
+	user_gcs->features_locked = target->thread.gcs_el0_locked;
+	user_gcs->gcspr_el0 = target->thread.gcspr_el0;
+}
+
+static void task_gcs_from_user(struct task_struct *target,
+			       const struct user_gcs *user_gcs)
+{
+	target->thread.gcs_el0_mode = user_gcs->features_enabled;
+	target->thread.gcs_el0_locked = user_gcs->features_locked;
+	target->thread.gcspr_el0 = user_gcs->gcspr_el0;
+}
+
 static int gcs_get(struct task_struct *target,
 		   const struct user_regset *regset,
 		   struct membuf to)
@@ -1495,9 +1542,7 @@ static int gcs_get(struct task_struct *target,
 	if (target == current)
 		gcs_preserve_current_state();
 
-	user_gcs.features_enabled = target->thread.gcs_el0_mode;
-	user_gcs.features_locked = target->thread.gcs_el0_locked;
-	user_gcs.gcspr_el0 = target->thread.gcspr_el0;
+	task_gcs_to_user(&user_gcs, target);
 
 	return membuf_write(&to, &user_gcs, sizeof(user_gcs));
 }
@@ -1513,6 +1558,8 @@ static int gcs_set(struct task_struct *target, const struct
 	if (!system_supports_gcs())
 		return -EINVAL;
 
+	task_gcs_to_user(&user_gcs, target);
+
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &user_gcs, 0, -1);
 	if (ret)
 		return ret;
@@ -1520,9 +1567,7 @@ static int gcs_set(struct task_struct *target, const struct
 	if (user_gcs.features_enabled & ~PR_SHADOW_STACK_SUPPORTED_STATUS_MASK)
 		return -EINVAL;
 
-	target->thread.gcs_el0_mode = user_gcs.features_enabled;
-	target->thread.gcs_el0_locked = user_gcs.features_locked;
-	target->thread.gcspr_el0 = user_gcs.gcspr_el0;
+	task_gcs_from_user(target, &user_gcs);
 
 	return 0;
 }
@@ -1567,7 +1612,7 @@ enum aarch64_regset {
 
 static const struct user_regset aarch64_regsets[] = {
 	[REGSET_GPR] = {
-		.core_note_type = NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n = sizeof(struct user_pt_regs) / sizeof(u64),
 		.size = sizeof(u64),
 		.align = sizeof(u64),
@@ -1575,7 +1620,7 @@ static const struct user_regset aarch64_regsets[] = {
 		.set = gpr_set
 	},
 	[REGSET_FPR] = {
-		.core_note_type = NT_PRFPREG,
+		USER_REGSET_NOTE_TYPE(PRFPREG),
 		.n = sizeof(struct user_fpsimd_state) / sizeof(u32),
 		/*
 		 * We pretend we have 32-bit registers because the fpsr and
@@ -1588,7 +1633,7 @@ static const struct user_regset aarch64_regsets[] = {
 		.set = fpr_set
 	},
 	[REGSET_TLS] = {
-		.core_note_type = NT_ARM_TLS,
+		USER_REGSET_NOTE_TYPE(ARM_TLS),
 		.n = 2,
 		.size = sizeof(void *),
 		.align = sizeof(void *),
@@ -1597,7 +1642,7 @@ static const struct user_regset aarch64_regsets[] = {
 	},
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 	[REGSET_HW_BREAK] = {
-		.core_note_type = NT_ARM_HW_BREAK,
+		USER_REGSET_NOTE_TYPE(ARM_HW_BREAK),
 		.n = sizeof(struct user_hwdebug_state) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
@@ -1605,7 +1650,7 @@ static const struct user_regset aarch64_regsets[] = {
 		.set = hw_break_set,
 	},
 	[REGSET_HW_WATCH] = {
-		.core_note_type = NT_ARM_HW_WATCH,
+		USER_REGSET_NOTE_TYPE(ARM_HW_WATCH),
 		.n = sizeof(struct user_hwdebug_state) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
@@ -1614,7 +1659,7 @@ static const struct user_regset aarch64_regsets[] = {
 	},
 #endif
 	[REGSET_SYSTEM_CALL] = {
-		.core_note_type = NT_ARM_SYSTEM_CALL,
+		USER_REGSET_NOTE_TYPE(ARM_SYSTEM_CALL),
 		.n = 1,
 		.size = sizeof(int),
 		.align = sizeof(int),
@@ -1622,7 +1667,7 @@ static const struct user_regset aarch64_regsets[] = {
 		.set = system_call_set,
 	},
 	[REGSET_FPMR] = {
-		.core_note_type = NT_ARM_FPMR,
+		USER_REGSET_NOTE_TYPE(ARM_FPMR),
 		.n = 1,
 		.size = sizeof(u64),
 		.align = sizeof(u64),
@@ -1631,7 +1676,7 @@ static const struct user_regset aarch64_regsets[] = {
 	},
 #ifdef CONFIG_ARM64_SVE
 	[REGSET_SVE] = { /* Scalable Vector Extension */
-		.core_note_type = NT_ARM_SVE,
+		USER_REGSET_NOTE_TYPE(ARM_SVE),
 		.n = DIV_ROUND_UP(SVE_PT_SIZE(ARCH_SVE_VQ_MAX,
 					      SVE_PT_REGS_SVE),
 				  SVE_VQ_BYTES),
@@ -1643,7 +1688,7 @@ static const struct user_regset aarch64_regsets[] = {
 #endif
 #ifdef CONFIG_ARM64_SME
 	[REGSET_SSVE] = { /* Streaming mode SVE */
-		.core_note_type = NT_ARM_SSVE,
+		USER_REGSET_NOTE_TYPE(ARM_SSVE),
 		.n = DIV_ROUND_UP(SVE_PT_SIZE(SME_VQ_MAX, SVE_PT_REGS_SVE),
 				  SVE_VQ_BYTES),
 		.size = SVE_VQ_BYTES,
@@ -1652,7 +1697,7 @@ static const struct user_regset aarch64_regsets[] = {
 		.set = ssve_set,
 	},
 	[REGSET_ZA] = { /* SME ZA */
-		.core_note_type = NT_ARM_ZA,
+		USER_REGSET_NOTE_TYPE(ARM_ZA),
 		/*
 		 * ZA is a single register but it's variably sized and
 		 * the ptrace core requires that the size of any data
@@ -1668,7 +1713,7 @@ static const struct user_regset aarch64_regsets[] = {
 		.set = za_set,
 	},
 	[REGSET_ZT] = { /* SME ZT */
-		.core_note_type = NT_ARM_ZT,
+		USER_REGSET_NOTE_TYPE(ARM_ZT),
 		.n = 1,
 		.size = ZT_SIG_REG_BYTES,
 		.align = sizeof(u64),
@@ -1678,7 +1723,7 @@ static const struct user_regset aarch64_regsets[] = {
 #endif
 #ifdef CONFIG_ARM64_PTR_AUTH
 	[REGSET_PAC_MASK] = {
-		.core_note_type = NT_ARM_PAC_MASK,
+		USER_REGSET_NOTE_TYPE(ARM_PAC_MASK),
 		.n = sizeof(struct user_pac_mask) / sizeof(u64),
 		.size = sizeof(u64),
 		.align = sizeof(u64),
@@ -1686,7 +1731,7 @@ static const struct user_regset aarch64_regsets[] = {
 		/* this cannot be set dynamically */
 	},
 	[REGSET_PAC_ENABLED_KEYS] = {
-		.core_note_type = NT_ARM_PAC_ENABLED_KEYS,
+		USER_REGSET_NOTE_TYPE(ARM_PAC_ENABLED_KEYS),
 		.n = 1,
 		.size = sizeof(long),
 		.align = sizeof(long),
@@ -1695,7 +1740,7 @@ static const struct user_regset aarch64_regsets[] = {
 	},
 #ifdef CONFIG_CHECKPOINT_RESTORE
 	[REGSET_PACA_KEYS] = {
-		.core_note_type = NT_ARM_PACA_KEYS,
+		USER_REGSET_NOTE_TYPE(ARM_PACA_KEYS),
 		.n = sizeof(struct user_pac_address_keys) / sizeof(__uint128_t),
 		.size = sizeof(__uint128_t),
 		.align = sizeof(__uint128_t),
@@ -1703,7 +1748,7 @@ static const struct user_regset aarch64_regsets[] = {
 		.set = pac_address_keys_set,
 	},
 	[REGSET_PACG_KEYS] = {
-		.core_note_type = NT_ARM_PACG_KEYS,
+		USER_REGSET_NOTE_TYPE(ARM_PACG_KEYS),
 		.n = sizeof(struct user_pac_generic_keys) / sizeof(__uint128_t),
 		.size = sizeof(__uint128_t),
 		.align = sizeof(__uint128_t),
@@ -1714,7 +1759,7 @@ static const struct user_regset aarch64_regsets[] = {
 #endif
 #ifdef CONFIG_ARM64_TAGGED_ADDR_ABI
 	[REGSET_TAGGED_ADDR_CTRL] = {
-		.core_note_type = NT_ARM_TAGGED_ADDR_CTRL,
+		USER_REGSET_NOTE_TYPE(ARM_TAGGED_ADDR_CTRL),
 		.n = 1,
 		.size = sizeof(long),
 		.align = sizeof(long),
@@ -1724,7 +1769,7 @@ static const struct user_regset aarch64_regsets[] = {
 #endif
 #ifdef CONFIG_ARM64_POE
 	[REGSET_POE] = {
-		.core_note_type = NT_ARM_POE,
+		USER_REGSET_NOTE_TYPE(ARM_POE),
 		.n = 1,
 		.size = sizeof(long),
 		.align = sizeof(long),
@@ -1734,7 +1779,7 @@ static const struct user_regset aarch64_regsets[] = {
 #endif
 #ifdef CONFIG_ARM64_GCS
 	[REGSET_GCS] = {
-		.core_note_type = NT_ARM_GCS,
+		USER_REGSET_NOTE_TYPE(ARM_GCS),
 		.n = sizeof(struct user_gcs) / sizeof(u64),
 		.size = sizeof(u64),
 		.align = sizeof(u64),
@@ -1924,7 +1969,7 @@ static int compat_tls_set(struct task_struct *target,
 
 static const struct user_regset aarch32_regsets[] = {
 	[REGSET_COMPAT_GPR] = {
-		.core_note_type = NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n = COMPAT_ELF_NGREG,
 		.size = sizeof(compat_elf_greg_t),
 		.align = sizeof(compat_elf_greg_t),
@@ -1932,7 +1977,7 @@ static const struct user_regset aarch32_regsets[] = {
 		.set = compat_gpr_set
 	},
 	[REGSET_COMPAT_VFP] = {
-		.core_note_type = NT_ARM_VFP,
+		USER_REGSET_NOTE_TYPE(ARM_VFP),
 		.n = VFP_STATE_SIZE / sizeof(compat_ulong_t),
 		.size = sizeof(compat_ulong_t),
 		.align = sizeof(compat_ulong_t),
@@ -1949,7 +1994,7 @@ static const struct user_regset_view user_aarch32_view = {
 
 static const struct user_regset aarch32_ptrace_regsets[] = {
 	[REGSET_GPR] = {
-		.core_note_type = NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n = COMPAT_ELF_NGREG,
 		.size = sizeof(compat_elf_greg_t),
 		.align = sizeof(compat_elf_greg_t),
@@ -1957,7 +2002,7 @@ static const struct user_regset aarch32_ptrace_regsets[] = {
 		.set = compat_gpr_set
 	},
 	[REGSET_FPR] = {
-		.core_note_type = NT_ARM_VFP,
+		USER_REGSET_NOTE_TYPE(ARM_VFP),
 		.n = VFP_STATE_SIZE / sizeof(compat_ulong_t),
 		.size = sizeof(compat_ulong_t),
 		.align = sizeof(compat_ulong_t),
@@ -1965,7 +2010,7 @@ static const struct user_regset aarch32_ptrace_regsets[] = {
 		.set = compat_vfp_set
 	},
 	[REGSET_TLS] = {
-		.core_note_type = NT_ARM_TLS,
+		USER_REGSET_NOTE_TYPE(ARM_TLS),
 		.n = 1,
 		.size = sizeof(compat_ulong_t),
 		.align = sizeof(compat_ulong_t),
@@ -1974,7 +2019,7 @@ static const struct user_regset aarch32_ptrace_regsets[] = {
 	},
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 	[REGSET_HW_BREAK] = {
-		.core_note_type = NT_ARM_HW_BREAK,
+		USER_REGSET_NOTE_TYPE(ARM_HW_BREAK),
 		.n = sizeof(struct user_hwdebug_state) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
@@ -1982,7 +2027,7 @@ static const struct user_regset aarch32_ptrace_regsets[] = {
 		.set = hw_break_set,
 	},
 	[REGSET_HW_WATCH] = {
-		.core_note_type = NT_ARM_HW_WATCH,
+		USER_REGSET_NOTE_TYPE(ARM_HW_WATCH),
 		.n = sizeof(struct user_hwdebug_state) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
@@ -1991,7 +2036,7 @@ static const struct user_regset aarch32_ptrace_regsets[] = {
 	},
 #endif
 	[REGSET_SYSTEM_CALL] = {
-		.core_note_type = NT_ARM_SYSTEM_CALL,
+		USER_REGSET_NOTE_TYPE(ARM_SYSTEM_CALL),
 		.n = 1,
 		.size = sizeof(int),
 		.align = sizeof(int),
diff --git a/arch/arm64/kernel/rsi.c b/arch/arm64/kernel/rsi.c
index 3031f25c32ef..c64a06f58c0b 100644
--- a/arch/arm64/kernel/rsi.c
+++ b/arch/arm64/kernel/rsi.c
@@ -8,6 +8,7 @@
 #include <linux/psci.h>
 #include <linux/swiotlb.h>
 #include <linux/cc_platform.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/mem_encrypt.h>
@@ -83,7 +84,25 @@ static void __init arm64_rsi_setup_memory(void)
 	}
 }
 
-bool __arm64_is_protected_mmio(phys_addr_t base, size_t size)
+/*
+ * Check if a given PA range is Trusted (e.g., Protected memory, a Trusted Device
+ * mapping, or an MMIO emulated in the Realm world).
+ *
+ * We can rely on the RIPAS value of the region to detect if a given region is
+ * protected.
+ *
+ *  RIPAS_DEV - A trusted device memory or a trusted emulated MMIO (in the Realm
+ *		world
+ *  RIPAS_RAM - Memory (RAM), protected by the RMM guarantees. (e.g., Firmware
+ *		reserved regions for data sharing).
+ *
+ *  RIPAS_DESTROYED is a special case of one of the above, where the host did
+ *  something without our permission and as such we can't do anything about it.
+ *
+ * The only case where something is emulated by the untrusted hypervisor or is
+ * backed by shared memory is indicated by RSI_RIPAS_EMPTY.
+ */
+bool arm64_rsi_is_protected(phys_addr_t base, size_t size)
 {
 	enum ripas ripas;
 	phys_addr_t end, top;
@@ -100,18 +119,18 @@ bool __arm64_is_protected_mmio(phys_addr_t base, size_t size)
 			break;
 		if (WARN_ON(top <= base))
 			break;
-		if (ripas != RSI_RIPAS_DEV)
+		if (ripas == RSI_RIPAS_EMPTY)
 			break;
 		base = top;
 	}
 
 	return base >= end;
 }
-EXPORT_SYMBOL(__arm64_is_protected_mmio);
+EXPORT_SYMBOL(arm64_rsi_is_protected);
 
 static int realm_ioremap_hook(phys_addr_t phys, size_t size, pgprot_t *prot)
 {
-	if (__arm64_is_protected_mmio(phys, size))
+	if (arm64_rsi_is_protected(phys, size))
 		*prot = pgprot_encrypted(*prot);
 	else
 		*prot = pgprot_decrypted(*prot);
@@ -140,3 +159,17 @@ void __init arm64_rsi_init(void)
 	static_branch_enable(&rsi_present);
 }
 
+static struct platform_device rsi_dev = {
+	.name = RSI_PDEV_NAME,
+	.id = PLATFORM_DEVID_NONE
+};
+
+static int __init arm64_create_dummy_rsi_dev(void)
+{
+	if (is_realm_world() &&
+	    platform_device_register(&rsi_dev))
+		pr_err("failed to register rsi platform device\n");
+	return 0;
+}
+
+arch_initcall(arm64_create_dummy_rsi_dev)
diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c
index 255d12f881c2..778f2a1faac8 100644
--- a/arch/arm64/kernel/sdei.c
+++ b/arch/arm64/kernel/sdei.c
@@ -34,10 +34,8 @@ unsigned long sdei_exit_mode;
 DECLARE_PER_CPU(unsigned long *, sdei_stack_normal_ptr);
 DECLARE_PER_CPU(unsigned long *, sdei_stack_critical_ptr);
 
-#ifdef CONFIG_VMAP_STACK
 DEFINE_PER_CPU(unsigned long *, sdei_stack_normal_ptr);
 DEFINE_PER_CPU(unsigned long *, sdei_stack_critical_ptr);
-#endif
 
 DECLARE_PER_CPU(unsigned long *, sdei_shadow_call_stack_normal_ptr);
 DECLARE_PER_CPU(unsigned long *, sdei_shadow_call_stack_critical_ptr);
@@ -65,9 +63,6 @@ static void free_sdei_stacks(void)
 {
 	int cpu;
 
-	if (!IS_ENABLED(CONFIG_VMAP_STACK))
-		return;
-
 	for_each_possible_cpu(cpu) {
 		_free_sdei_stack(&sdei_stack_normal_ptr, cpu);
 		_free_sdei_stack(&sdei_stack_critical_ptr, cpu);
@@ -91,9 +86,6 @@ static int init_sdei_stacks(void)
 	int cpu;
 	int err = 0;
 
-	if (!IS_ENABLED(CONFIG_VMAP_STACK))
-		return 0;
-
 	for_each_possible_cpu(cpu) {
 		err = _init_sdei_stack(&sdei_stack_normal_ptr, cpu);
 		if (err)
@@ -206,7 +198,7 @@ out_err:
 /*
  * do_sdei_event() returns one of:
  *  SDEI_EV_HANDLED -  success, return to the interrupted context.
- *  SDEI_EV_FAILED  -  failure, return this error code to firmare.
+ *  SDEI_EV_FAILED  -  failure, return this error code to firmware.
  *  virtual-address -  success, return to this address.
  */
 unsigned long __kprobes do_sdei_event(struct pt_regs *regs,
@@ -247,7 +239,7 @@ unsigned long __kprobes do_sdei_event(struct pt_regs *regs,
 	 * If we interrupted the kernel with interrupts masked, we always go
 	 * back to wherever we came from.
 	 */
-	if (mode == kernel_mode && !interrupts_enabled(regs))
+	if (mode == kernel_mode && regs_irqs_disabled(regs))
 		return SDEI_EV_HANDLED;
 
 	/*
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 4f613e8e0745..23c05dc7a8f2 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -169,7 +169,7 @@ static void __init smp_build_mpidr_hash(void)
 
 static void __init setup_machine_fdt(phys_addr_t dt_phys)
 {
-	int size;
+	int size = 0;
 	void *dt_virt = fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL);
 	const char *name;
 
@@ -182,10 +182,10 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys)
 	 */
 	if (!early_init_dt_scan(dt_virt, dt_phys)) {
 		pr_crit("\n"
-			"Error: invalid device tree blob at physical address %pa (virtual address 0x%px)\n"
-			"The dtb must be 8-byte aligned and must not exceed 2 MB in size\n"
-			"\nPlease check your bootloader.",
-			&dt_phys, dt_virt);
+			"Error: invalid device tree blob: PA=%pa, VA=%px, size=%d bytes\n"
+			"The dtb must be 8-byte aligned and must not exceed 2 MB in size.\n"
+			"\nPlease check your bootloader.\n",
+			&dt_phys, dt_virt, size);
 
 		/*
 		 * Note that in this _really_ early stage we cannot even BUG()
@@ -214,7 +214,7 @@ static void __init request_standard_resources(void)
 	unsigned long i = 0;
 	size_t res_size;
 
-	kernel_code.start   = __pa_symbol(_stext);
+	kernel_code.start   = __pa_symbol(_text);
 	kernel_code.end     = __pa_symbol(__init_begin - 1);
 	kernel_data.start   = __pa_symbol(_sdata);
 	kernel_data.end     = __pa_symbol(_end - 1);
@@ -223,9 +223,7 @@ static void __init request_standard_resources(void)
 
 	num_standard_resources = memblock.memory.cnt;
 	res_size = num_standard_resources * sizeof(*standard_resources);
-	standard_resources = memblock_alloc(res_size, SMP_CACHE_BYTES);
-	if (!standard_resources)
-		panic("%s: Failed to allocate %zu bytes\n", __func__, res_size);
+	standard_resources = memblock_alloc_or_panic(res_size, SMP_CACHE_BYTES);
 
 	for_each_mem_region(region) {
 		res = &standard_resources[i++];
@@ -282,7 +280,7 @@ u64 cpu_logical_map(unsigned int cpu)
 
 void __init __no_sanitize_address setup_arch(char **cmdline_p)
 {
-	setup_initial_init_mm(_stext, _etext, _edata, _end);
+	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 	*cmdline_p = boot_command_line;
 
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 14ac6fdb872b..1110eeb21f57 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -9,6 +9,7 @@
 #include <linux/cache.h>
 #include <linux/compat.h>
 #include <linux/errno.h>
+#include <linux/irq-entry-common.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/freezer.h>
@@ -36,15 +37,8 @@
 #include <asm/traps.h>
 #include <asm/vdso.h>
 
-#ifdef CONFIG_ARM64_GCS
 #define GCS_SIGNAL_CAP(addr) (((unsigned long)addr) & GCS_CAP_ADDR_MASK)
 
-static bool gcs_signal_cap_valid(u64 addr, u64 val)
-{
-	return val == GCS_SIGNAL_CAP(addr);
-}
-#endif
-
 /*
  * Do a signal return; undo the signal stack. These are aligned to 128-bit.
  */
@@ -98,12 +92,15 @@ static void save_reset_user_access_state(struct user_access_state *ua_state)
 		u64 por_enable_all = 0;
 
 		for (int pkey = 0; pkey < arch_max_pkey(); pkey++)
-			por_enable_all |= POE_RXW << (pkey * POR_BITS_PER_PKEY);
+			por_enable_all |= POR_ELx_PERM_PREP(pkey, POE_RWX);
 
 		ua_state->por_el0 = read_sysreg_s(SYS_POR_EL0);
 		write_sysreg_s(por_enable_all, SYS_POR_EL0);
-		/* Ensure that any subsequent uaccess observes the updated value */
-		isb();
+		/*
+		 * No ISB required as we can tolerate spurious Overlay faults -
+		 * the fault handler will check again based on the new value
+		 * of POR_EL0.
+		 */
 	}
 }
 
@@ -257,6 +254,8 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
 		&current->thread.uw.fpsimd_state;
 	int err;
 
+	fpsimd_sync_from_effective_state(current);
+
 	/* copy the FP and status/control registers */
 	err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs));
 	__put_user_error(fpsimd->fpsr, &ctx->fpsr, err);
@@ -269,37 +268,46 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
 	return err ? -EFAULT : 0;
 }
 
-static int restore_fpsimd_context(struct user_ctxs *user)
+static int read_fpsimd_context(struct user_fpsimd_state *fpsimd,
+			       struct user_ctxs *user)
 {
-	struct user_fpsimd_state fpsimd;
-	int err = 0;
+	int err;
 
 	/* check the size information */
 	if (user->fpsimd_size != sizeof(struct fpsimd_context))
 		return -EINVAL;
 
 	/* copy the FP and status/control registers */
-	err = __copy_from_user(fpsimd.vregs, &(user->fpsimd->vregs),
-			       sizeof(fpsimd.vregs));
-	__get_user_error(fpsimd.fpsr, &(user->fpsimd->fpsr), err);
-	__get_user_error(fpsimd.fpcr, &(user->fpsimd->fpcr), err);
+	err = __copy_from_user(fpsimd->vregs, &(user->fpsimd->vregs),
+			       sizeof(fpsimd->vregs));
+	__get_user_error(fpsimd->fpsr, &(user->fpsimd->fpsr), err);
+	__get_user_error(fpsimd->fpcr, &(user->fpsimd->fpcr), err);
+
+	return err ? -EFAULT : 0;
+}
+
+static int restore_fpsimd_context(struct user_ctxs *user)
+{
+	struct user_fpsimd_state fpsimd;
+	int err;
+
+	err = read_fpsimd_context(&fpsimd, user);
+	if (err)
+		return err;
 
 	clear_thread_flag(TIF_SVE);
+	current->thread.svcr &= ~SVCR_SM_MASK;
 	current->thread.fp_type = FP_STATE_FPSIMD;
 
 	/* load the hardware registers from the fpsimd_state structure */
-	if (!err)
-		fpsimd_update_current_state(&fpsimd);
-
-	return err ? -EFAULT : 0;
+	fpsimd_update_current_state(&fpsimd);
+	return 0;
 }
 
 static int preserve_fpmr_context(struct fpmr_context __user *ctx)
 {
 	int err = 0;
 
-	current->thread.uw.fpmr = read_sysreg_s(SYS_FPMR);
-
 	__put_user_error(FPMR_MAGIC, &ctx->head.magic, err);
 	__put_user_error(sizeof(*ctx), &ctx->head.size, err);
 	__put_user_error(current->thread.uw.fpmr, &ctx->fpmr, err);
@@ -317,7 +325,7 @@ static int restore_fpmr_context(struct user_ctxs *user)
 
 	__get_user_error(fpmr, &user->fpmr->fpmr, err);
 	if (!err)
-		write_sysreg_s(fpmr, SYS_FPMR);
+		current->thread.uw.fpmr = fpmr;
 
 	return err;
 }
@@ -379,11 +387,6 @@ static int preserve_sve_context(struct sve_context __user *ctx)
 	err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
 
 	if (vq) {
-		/*
-		 * This assumes that the SVE state has already been saved to
-		 * the task struct by calling the function
-		 * fpsimd_signal_preserve_current_state().
-		 */
 		err |= __copy_to_user((char __user *)ctx + SVE_SIG_REGS_OFFSET,
 				      current->thread.sve_state,
 				      SVE_SIG_REGS_SIZE(vq));
@@ -398,6 +401,7 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 	unsigned int vl, vq;
 	struct user_fpsimd_state fpsimd;
 	u16 user_vl, flags;
+	bool sm;
 
 	if (user->sve_size < sizeof(*user->sve))
 		return -EINVAL;
@@ -407,7 +411,8 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 	if (err)
 		return err;
 
-	if (flags & SVE_SIG_FLAG_SM) {
+	sm = flags & SVE_SIG_FLAG_SM;
+	if (sm) {
 		if (!system_supports_sme())
 			return -EINVAL;
 
@@ -427,28 +432,23 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 	if (user_vl != vl)
 		return -EINVAL;
 
-	if (user->sve_size == sizeof(*user->sve)) {
-		clear_thread_flag(TIF_SVE);
-		current->thread.svcr &= ~SVCR_SM_MASK;
-		current->thread.fp_type = FP_STATE_FPSIMD;
-		goto fpsimd_only;
-	}
+	/*
+	 * Non-streaming SVE state may be preserved without an SVE payload, in
+	 * which case the SVE context only has a header with VL==0, and all
+	 * state can be restored from the FPSIMD context.
+	 *
+	 * Streaming SVE state is always preserved with an SVE payload. For
+	 * consistency and robustness, reject restoring streaming SVE state
+	 * without an SVE payload.
+	 */
+	if (!sm && user->sve_size == sizeof(*user->sve))
+		return restore_fpsimd_context(user);
 
 	vq = sve_vq_from_vl(vl);
 
 	if (user->sve_size < SVE_SIG_CONTEXT_SIZE(vq))
 		return -EINVAL;
 
-	/*
-	 * Careful: we are about __copy_from_user() directly into
-	 * thread.sve_state with preemption enabled, so protection is
-	 * needed to prevent a racing context switch from writing stale
-	 * registers back over the new data.
-	 */
-
-	fpsimd_flush_task_state(current);
-	/* From now, fpsimd_thread_switch() won't touch thread.sve_state */
-
 	sve_alloc(current, true);
 	if (!current->thread.sve_state) {
 		clear_thread_flag(TIF_SVE);
@@ -468,19 +468,14 @@ static int restore_sve_fpsimd_context(struct user_ctxs *user)
 		set_thread_flag(TIF_SVE);
 	current->thread.fp_type = FP_STATE_SVE;
 
-fpsimd_only:
-	/* copy the FP and status/control registers */
-	/* restore_sigframe() already checked that user->fpsimd != NULL. */
-	err = __copy_from_user(fpsimd.vregs, user->fpsimd->vregs,
-			       sizeof(fpsimd.vregs));
-	__get_user_error(fpsimd.fpsr, &user->fpsimd->fpsr, err);
-	__get_user_error(fpsimd.fpcr, &user->fpsimd->fpcr, err);
+	err = read_fpsimd_context(&fpsimd, user);
+	if (err)
+		return err;
 
-	/* load the hardware registers from the fpsimd_state structure */
-	if (!err)
-		fpsimd_update_current_state(&fpsimd);
+	/* Merge the FPSIMD registers into the SVE state */
+	fpsimd_update_current_state(&fpsimd);
 
-	return err ? -EFAULT : 0;
+	return 0;
 }
 
 #else /* ! CONFIG_ARM64_SVE */
@@ -500,13 +495,12 @@ extern int preserve_sve_context(void __user *ctx);
 
 static int preserve_tpidr2_context(struct tpidr2_context __user *ctx)
 {
+	u64 tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
 	int err = 0;
 
-	current->thread.tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
-
 	__put_user_error(TPIDR2_MAGIC, &ctx->head.magic, err);
 	__put_user_error(sizeof(*ctx), &ctx->head.size, err);
-	__put_user_error(current->thread.tpidr2_el0, &ctx->tpidr2, err);
+	__put_user_error(tpidr2_el0, &ctx->tpidr2, err);
 
 	return err;
 }
@@ -548,11 +542,6 @@ static int preserve_za_context(struct za_context __user *ctx)
 	err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
 
 	if (vq) {
-		/*
-		 * This assumes that the ZA state has already been saved to
-		 * the task struct by calling the function
-		 * fpsimd_signal_preserve_current_state().
-		 */
 		err |= __copy_to_user((char __user *)ctx + ZA_SIG_REGS_OFFSET,
 				      current->thread.sme_state,
 				      ZA_SIG_REGS_SIZE(vq));
@@ -587,16 +576,6 @@ static int restore_za_context(struct user_ctxs *user)
 	if (user->za_size < ZA_SIG_CONTEXT_SIZE(vq))
 		return -EINVAL;
 
-	/*
-	 * Careful: we are about __copy_from_user() directly into
-	 * thread.sme_state with preemption enabled, so protection is
-	 * needed to prevent a racing context switch from writing stale
-	 * registers back over the new data.
-	 */
-
-	fpsimd_flush_task_state(current);
-	/* From now, fpsimd_thread_switch() won't touch thread.sve_state */
-
 	sme_alloc(current, true);
 	if (!current->thread.sme_state) {
 		current->thread.svcr &= ~SVCR_ZA_MASK;
@@ -634,11 +613,6 @@ static int preserve_zt_context(struct zt_context __user *ctx)
 	BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
 	err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
 
-	/*
-	 * This assumes that the ZT state has already been saved to
-	 * the task struct by calling the function
-	 * fpsimd_signal_preserve_current_state().
-	 */
 	err |= __copy_to_user((char __user *)ctx + ZT_SIG_REGS_OFFSET,
 			      thread_zt_state(&current->thread),
 			      ZT_SIG_REGS_SIZE(1));
@@ -664,16 +638,6 @@ static int restore_zt_context(struct user_ctxs *user)
 	if (nregs != 1)
 		return -EINVAL;
 
-	/*
-	 * Careful: we are about __copy_from_user() directly into
-	 * thread.zt_state with preemption enabled, so protection is
-	 * needed to prevent a racing context switch from writing stale
-	 * registers back over the new data.
-	 */
-
-	fpsimd_flush_task_state(current);
-	/* From now, fpsimd_thread_switch() won't touch ZT in thread state */
-
 	err = __copy_from_user(thread_zt_state(&current->thread),
 			       (char __user const *)user->zt +
 					ZT_SIG_REGS_OFFSET,
@@ -1024,6 +988,8 @@ static int restore_sigframe(struct pt_regs *regs,
 	 */
 	forget_syscall(regs);
 
+	fpsimd_save_and_flush_current_state();
+
 	err |= !valid_user_regs(&regs->user_regs, current);
 	if (err == 0)
 		err = parse_user_sigframe(&user, sf);
@@ -1062,8 +1028,7 @@ static int restore_sigframe(struct pt_regs *regs,
 #ifdef CONFIG_ARM64_GCS
 static int gcs_restore_signal(void)
 {
-	unsigned long __user *gcspr_el0;
-	u64 cap;
+	u64 gcspr_el0, cap;
 	int ret;
 
 	if (!system_supports_gcs())
@@ -1072,7 +1037,7 @@ static int gcs_restore_signal(void)
 	if (!(current->thread.gcs_el0_mode & PR_SHADOW_STACK_ENABLE))
 		return 0;
 
-	gcspr_el0 = (unsigned long __user *)read_sysreg_s(SYS_GCSPR_EL0);
+	gcspr_el0 = read_sysreg_s(SYS_GCSPR_EL0);
 
 	/*
 	 * Ensure that any changes to the GCS done via GCS operations
@@ -1087,22 +1052,23 @@ static int gcs_restore_signal(void)
 	 * then faults will be generated on GCS operations - the main
 	 * concern is to protect GCS pages.
 	 */
-	ret = copy_from_user(&cap, gcspr_el0, sizeof(cap));
+	ret = copy_from_user(&cap, (unsigned long __user *)gcspr_el0,
+			     sizeof(cap));
 	if (ret)
 		return -EFAULT;
 
 	/*
 	 * Check that the cap is the actual GCS before replacing it.
 	 */
-	if (!gcs_signal_cap_valid((u64)gcspr_el0, cap))
+	if (cap != GCS_SIGNAL_CAP(gcspr_el0))
 		return -EINVAL;
 
 	/* Invalidate the token to prevent reuse */
-	put_user_gcs(0, (__user void*)gcspr_el0, &ret);
+	put_user_gcs(0, (unsigned long __user *)gcspr_el0, &ret);
 	if (ret != 0)
 		return -EFAULT;
 
-	write_sysreg_s(gcspr_el0 + 1, SYS_GCSPR_EL0);
+	write_sysreg_s(gcspr_el0 + 8, SYS_GCSPR_EL0);
 
 	return 0;
 }
@@ -1421,7 +1387,7 @@ static int get_sigframe(struct rt_sigframe_user_layout *user,
 
 static int gcs_signal_entry(__sigrestore_t sigtramp, struct ksignal *ksig)
 {
-	unsigned long __user *gcspr_el0;
+	u64 gcspr_el0;
 	int ret = 0;
 
 	if (!system_supports_gcs())
@@ -1434,18 +1400,20 @@ static int gcs_signal_entry(__sigrestore_t sigtramp, struct ksignal *ksig)
 	 * We are entering a signal handler, current register state is
 	 * active.
 	 */
-	gcspr_el0 = (unsigned long __user *)read_sysreg_s(SYS_GCSPR_EL0);
+	gcspr_el0 = read_sysreg_s(SYS_GCSPR_EL0);
 
 	/*
 	 * Push a cap and the GCS entry for the trampoline onto the GCS.
 	 */
-	put_user_gcs((unsigned long)sigtramp, gcspr_el0 - 2, &ret);
-	put_user_gcs(GCS_SIGNAL_CAP(gcspr_el0 - 1), gcspr_el0 - 1, &ret);
+	put_user_gcs((unsigned long)sigtramp,
+		     (unsigned long __user *)(gcspr_el0 - 16), &ret);
+	put_user_gcs(GCS_SIGNAL_CAP(gcspr_el0 - 8),
+		     (unsigned long __user *)(gcspr_el0 - 8), &ret);
 	if (ret != 0)
 		return ret;
 
-	gcspr_el0 -= 2;
-	write_sysreg_s((unsigned long)gcspr_el0, SYS_GCSPR_EL0);
+	gcspr_el0 -= 16;
+	write_sysreg_s(gcspr_el0, SYS_GCSPR_EL0);
 
 	return 0;
 }
@@ -1462,10 +1430,33 @@ static int setup_return(struct pt_regs *regs, struct ksignal *ksig,
 			 struct rt_sigframe_user_layout *user, int usig)
 {
 	__sigrestore_t sigtramp;
+	int err;
+
+	if (ksig->ka.sa.sa_flags & SA_RESTORER)
+		sigtramp = ksig->ka.sa.sa_restorer;
+	else
+		sigtramp = VDSO_SYMBOL(current->mm->context.vdso, sigtramp);
+
+	err = gcs_signal_entry(sigtramp, ksig);
+	if (err)
+		return err;
+
+	/*
+	 * We must not fail from this point onwards. We are going to update
+	 * registers, including SP, in order to invoke the signal handler. If
+	 * we failed and attempted to deliver a nested SIGSEGV to a handler
+	 * after that point, the subsequent sigreturn would end up restoring
+	 * the (partial) state for the original signal handler.
+	 */
 
 	regs->regs[0] = usig;
+	if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
+		regs->regs[1] = (unsigned long)&user->sigframe->info;
+		regs->regs[2] = (unsigned long)&user->sigframe->uc;
+	}
 	regs->sp = (unsigned long)user->sigframe;
 	regs->regs[29] = (unsigned long)&user->next_frame->fp;
+	regs->regs[30] = (unsigned long)sigtramp;
 	regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
 
 	/*
@@ -1489,31 +1480,12 @@ static int setup_return(struct pt_regs *regs, struct ksignal *ksig,
 
 	/* Signal handlers are invoked with ZA and streaming mode disabled */
 	if (system_supports_sme()) {
-		/*
-		 * If we were in streaming mode the saved register
-		 * state was SVE but we will exit SM and use the
-		 * FPSIMD register state - flush the saved FPSIMD
-		 * register state in case it gets loaded.
-		 */
-		if (current->thread.svcr & SVCR_SM_MASK) {
-			memset(&current->thread.uw.fpsimd_state, 0,
-			       sizeof(current->thread.uw.fpsimd_state));
-			current->thread.fp_type = FP_STATE_FPSIMD;
-		}
-
-		current->thread.svcr &= ~(SVCR_ZA_MASK |
-					  SVCR_SM_MASK);
-		sme_smstop();
+		task_smstop_sm(current);
+		current->thread.svcr &= ~SVCR_ZA_MASK;
+		write_sysreg_s(0, SYS_TPIDR2_EL0);
 	}
 
-	if (ksig->ka.sa.sa_flags & SA_RESTORER)
-		sigtramp = ksig->ka.sa.sa_restorer;
-	else
-		sigtramp = VDSO_SYMBOL(current->mm->context.vdso, sigtramp);
-
-	regs->regs[30] = (unsigned long)sigtramp;
-
-	return gcs_signal_entry(sigtramp, ksig);
+	return 0;
 }
 
 static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
@@ -1524,7 +1496,7 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
 	struct user_access_state ua_state;
 	int err = 0;
 
-	fpsimd_signal_preserve_current_state();
+	fpsimd_save_and_flush_current_state();
 
 	if (get_sigframe(&user, ksig, regs))
 		return 1;
@@ -1537,14 +1509,16 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
 
 	err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
 	err |= setup_sigframe(&user, regs, set, &ua_state);
-	if (err == 0) {
+	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+		err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+	if (err == 0)
 		err = setup_return(regs, ksig, &user, usig);
-		if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
-			err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-			regs->regs[1] = (unsigned long)&frame->info;
-			regs->regs[2] = (unsigned long)&frame->uc;
-		}
-	}
+
+	/*
+	 * We must not fail if setup_return() succeeded - see comment at the
+	 * beginning of setup_return().
+	 */
 
 	if (err == 0)
 		set_handler_user_access_state();
@@ -1603,7 +1577,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
  * the kernel can handle, and then we build all the user-level signal handling
  * stack-frames in one go after that.
  */
-void do_signal(struct pt_regs *regs)
+void arch_do_signal_or_restart(struct pt_regs *regs)
 {
 	unsigned long continue_addr = 0, restart_addr = 0;
 	int retval = 0;
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index 81e798b6dada..bb3b526ff43f 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -103,7 +103,7 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
 	 * Note that this also saves V16-31, which aren't visible
 	 * in AArch32.
 	 */
-	fpsimd_signal_preserve_current_state();
+	fpsimd_save_and_flush_current_state();
 
 	/* Place structure header on the stack */
 	__put_user_error(magic, &frame->magic, err);
@@ -169,14 +169,17 @@ static int compat_restore_vfp_context(struct compat_vfp_sigframe __user *frame)
 	fpsimd.fpsr = fpscr & VFP_FPSCR_STAT_MASK;
 	fpsimd.fpcr = fpscr & VFP_FPSCR_CTRL_MASK;
 
+	if (err)
+		return -EFAULT;
+
 	/*
 	 * We don't need to touch the exception register, so
 	 * reload the hardware state.
 	 */
-	if (!err)
-		fpsimd_update_current_state(&fpsimd);
+	fpsimd_save_and_flush_current_state();
+	current->thread.uw.fpsimd_state = fpsimd;
 
-	return err ? -EFAULT : 0;
+	return 0;
 }
 
 static int compat_restore_sigframe(struct pt_regs *regs,
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 3b3f6b56e733..1aa324104afb 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -64,26 +64,18 @@ struct secondary_data secondary_data;
 /* Number of CPUs which aren't online, but looping in kernel text. */
 static int cpus_stuck_in_kernel;
 
-enum ipi_msg_type {
-	IPI_RESCHEDULE,
-	IPI_CALL_FUNC,
-	IPI_CPU_STOP,
-	IPI_CPU_STOP_NMI,
-	IPI_TIMER,
-	IPI_IRQ_WORK,
-	NR_IPI,
-	/*
-	 * Any enum >= NR_IPI and < MAX_IPI is special and not tracable
-	 * with trace_ipi_*
-	 */
-	IPI_CPU_BACKTRACE = NR_IPI,
-	IPI_KGDB_ROUNDUP,
-	MAX_IPI
-};
-
 static int ipi_irq_base __ro_after_init;
 static int nr_ipi __ro_after_init = NR_IPI;
-static struct irq_desc *ipi_desc[MAX_IPI] __ro_after_init;
+
+struct ipi_descs {
+	struct irq_desc *descs[MAX_IPI];
+};
+
+static DEFINE_PER_CPU_READ_MOSTLY(struct ipi_descs, pcpu_ipi_desc);
+
+#define get_ipi_desc(__cpu, __ipi) (per_cpu_ptr(&pcpu_ipi_desc, __cpu)->descs[__ipi])
+
+static bool percpu_ipi_descs __ro_after_init;
 
 static bool crash_stop;
 
@@ -358,7 +350,7 @@ void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu)
 
 	/*
 	 * Now that the dying CPU is beyond the point of no return w.r.t.
-	 * in-kernel synchronisation, try to get the firwmare to help us to
+	 * in-kernel synchronisation, try to get the firmware to help us to
 	 * verify that it has really left the kernel before we consider
 	 * clobbering anything it might still be using.
 	 */
@@ -531,7 +523,7 @@ int arch_register_cpu(int cpu)
 
 	/*
 	 * Availability of the acpi handle is sufficient to establish
-	 * that _STA has aleady been checked. No need to recheck here.
+	 * that _STA has already been checked. No need to recheck here.
 	 */
 	c->hotpluggable = arch_cpu_is_hotpluggable(cpu);
 
@@ -844,7 +836,7 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
 			   prec >= 4 ? " " : "");
 		for_each_online_cpu(cpu)
-			seq_printf(p, "%10u ", irq_desc_kstat_cpu(ipi_desc[i], cpu));
+			seq_printf(p, "%10u ", irq_desc_kstat_cpu(get_ipi_desc(cpu, i), cpu));
 		seq_printf(p, "      %s\n", ipi_types[i]);
 	}
 
@@ -917,9 +909,20 @@ static void __noreturn ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs
 #endif
 }
 
+static void arm64_send_ipi(const cpumask_t *mask, unsigned int nr)
+{
+	unsigned int cpu;
+
+	if (!percpu_ipi_descs)
+		__ipi_send_mask(get_ipi_desc(0, nr), mask);
+	else
+		for_each_cpu(cpu, mask)
+			__ipi_send_single(get_ipi_desc(cpu, nr), cpu);
+}
+
 static void arm64_backtrace_ipi(cpumask_t *mask)
 {
-	__ipi_send_mask(ipi_desc[IPI_CPU_BACKTRACE], mask);
+	arm64_send_ipi(mask, IPI_CPU_BACKTRACE);
 }
 
 void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu)
@@ -944,7 +947,7 @@ void kgdb_roundup_cpus(void)
 		if (cpu == this_cpu)
 			continue;
 
-		__ipi_send_single(ipi_desc[IPI_KGDB_ROUNDUP], cpu);
+		__ipi_send_single(get_ipi_desc(cpu, IPI_KGDB_ROUNDUP), cpu);
 	}
 }
 #endif
@@ -1013,14 +1016,16 @@ static void do_handle_IPI(int ipinr)
 
 static irqreturn_t ipi_handler(int irq, void *data)
 {
-	do_handle_IPI(irq - ipi_irq_base);
+	unsigned int ipi = (irq - ipi_irq_base) % nr_ipi;
+
+	do_handle_IPI(ipi);
 	return IRQ_HANDLED;
 }
 
 static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
 {
 	trace_ipi_raise(target, ipi_types[ipinr]);
-	__ipi_send_mask(ipi_desc[ipinr], target);
+	arm64_send_ipi(target, ipinr);
 }
 
 static bool ipi_should_be_nmi(enum ipi_msg_type ipi)
@@ -1046,11 +1051,15 @@ static void ipi_setup(int cpu)
 		return;
 
 	for (i = 0; i < nr_ipi; i++) {
-		if (ipi_should_be_nmi(i)) {
-			prepare_percpu_nmi(ipi_irq_base + i);
-			enable_percpu_nmi(ipi_irq_base + i, 0);
+		if (!percpu_ipi_descs) {
+			if (ipi_should_be_nmi(i)) {
+				prepare_percpu_nmi(ipi_irq_base + i);
+				enable_percpu_nmi(ipi_irq_base + i, 0);
+			} else {
+				enable_percpu_irq(ipi_irq_base + i, 0);
+			}
 		} else {
-			enable_percpu_irq(ipi_irq_base + i, 0);
+			enable_irq(irq_desc_get_irq(get_ipi_desc(cpu, i)));
 		}
 	}
 }
@@ -1064,44 +1073,77 @@ static void ipi_teardown(int cpu)
 		return;
 
 	for (i = 0; i < nr_ipi; i++) {
-		if (ipi_should_be_nmi(i)) {
-			disable_percpu_nmi(ipi_irq_base + i);
-			teardown_percpu_nmi(ipi_irq_base + i);
+		if (!percpu_ipi_descs) {
+			if (ipi_should_be_nmi(i)) {
+				disable_percpu_nmi(ipi_irq_base + i);
+				teardown_percpu_nmi(ipi_irq_base + i);
+			} else {
+				disable_percpu_irq(ipi_irq_base + i);
+			}
 		} else {
-			disable_percpu_irq(ipi_irq_base + i);
+			disable_irq(irq_desc_get_irq(get_ipi_desc(cpu, i)));
 		}
 	}
 }
 #endif
 
-void __init set_smp_ipi_range(int ipi_base, int n)
+static void ipi_setup_sgi(int ipi)
 {
-	int i;
+	int err, irq, cpu;
 
-	WARN_ON(n < MAX_IPI);
-	nr_ipi = min(n, MAX_IPI);
+	irq = ipi_irq_base + ipi;
 
-	for (i = 0; i < nr_ipi; i++) {
-		int err;
+	if (ipi_should_be_nmi(ipi)) {
+		err = request_percpu_nmi(irq, ipi_handler, "IPI", NULL, &irq_stat);
+		WARN(err, "Could not request IRQ %d as NMI, err=%d\n", irq, err);
+	} else {
+		err = request_percpu_irq(irq, ipi_handler, "IPI", &irq_stat);
+		WARN(err, "Could not request IRQ %d as IRQ, err=%d\n", irq, err);
+	}
 
-		if (ipi_should_be_nmi(i)) {
-			err = request_percpu_nmi(ipi_base + i, ipi_handler,
-						 "IPI", &irq_stat);
-			WARN(err, "Could not request IPI %d as NMI, err=%d\n",
-			     i, err);
-		} else {
-			err = request_percpu_irq(ipi_base + i, ipi_handler,
-						 "IPI", &irq_stat);
-			WARN(err, "Could not request IPI %d as IRQ, err=%d\n",
-			     i, err);
-		}
+	for_each_possible_cpu(cpu)
+		get_ipi_desc(cpu, ipi) = irq_to_desc(irq);
+
+	irq_set_status_flags(irq, IRQ_HIDDEN);
+}
+
+static void ipi_setup_lpi(int ipi, int ncpus)
+{
+	for (int cpu = 0; cpu < ncpus; cpu++) {
+		int err, irq;
+
+		irq = ipi_irq_base + (cpu * nr_ipi) + ipi;
+
+		err = irq_force_affinity(irq, cpumask_of(cpu));
+		WARN(err, "Could not force affinity IRQ %d, err=%d\n", irq, err);
+
+		err = request_irq(irq, ipi_handler, IRQF_NO_AUTOEN, "IPI",
+				  NULL);
+		WARN(err, "Could not request IRQ %d, err=%d\n", irq, err);
+
+		irq_set_status_flags(irq, (IRQ_HIDDEN | IRQ_NO_BALANCING_MASK));
 
-		ipi_desc[i] = irq_to_desc(ipi_base + i);
-		irq_set_status_flags(ipi_base + i, IRQ_HIDDEN);
+		get_ipi_desc(cpu, ipi) = irq_to_desc(irq);
 	}
+}
+
+void __init set_smp_ipi_range_percpu(int ipi_base, int n, int ncpus)
+{
+	int i;
+
+	WARN_ON(n < MAX_IPI);
+	nr_ipi = min(n, MAX_IPI);
 
+	percpu_ipi_descs = !!ncpus;
 	ipi_irq_base = ipi_base;
 
+	for (i = 0; i < nr_ipi; i++) {
+		if (!percpu_ipi_descs)
+			ipi_setup_sgi(i);
+		else
+			ipi_setup_lpi(i, ncpus);
+	}
+
 	/* Setup the boot CPU immediately */
 	ipi_setup(smp_processor_id());
 }
@@ -1143,7 +1185,7 @@ static inline unsigned int num_other_online_cpus(void)
 void smp_send_stop(void)
 {
 	static unsigned long stop_in_progress;
-	cpumask_t mask;
+	static cpumask_t mask;
 	unsigned long timeout;
 
 	/*
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index caef85462acb..3ebcf8c53fb0 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -26,7 +26,6 @@ enum kunwind_source {
 	KUNWIND_SOURCE_CALLER,
 	KUNWIND_SOURCE_TASK,
 	KUNWIND_SOURCE_REGS_PC,
-	KUNWIND_SOURCE_REGS_LR,
 };
 
 union unwind_flags {
@@ -138,8 +137,10 @@ kunwind_recover_return_address(struct kunwind_state *state)
 		orig_pc = ftrace_graph_ret_addr(state->task, &state->graph_idx,
 						state->common.pc,
 						(void *)state->common.fp);
-		if (WARN_ON_ONCE(state->common.pc == orig_pc))
+		if (state->common.pc == orig_pc) {
+			WARN_ON_ONCE(state->task == current);
 			return -EINVAL;
+		}
 		state->common.pc = orig_pc;
 		state->flags.fgraph = 1;
 	}
@@ -151,6 +152,8 @@ kunwind_recover_return_address(struct kunwind_state *state)
 		orig_pc = kretprobe_find_ret_addr(state->task,
 						  (void *)state->common.fp,
 						  &state->kr_cur);
+		if (!orig_pc)
+			return -EINVAL;
 		state->common.pc = orig_pc;
 		state->flags.kretprobe = 1;
 	}
@@ -178,23 +181,8 @@ int kunwind_next_regs_pc(struct kunwind_state *state)
 	state->regs = regs;
 	state->common.pc = regs->pc;
 	state->common.fp = regs->regs[29];
-	state->source = KUNWIND_SOURCE_REGS_PC;
-	return 0;
-}
-
-static __always_inline int
-kunwind_next_regs_lr(struct kunwind_state *state)
-{
-	/*
-	 * The stack for the regs was consumed by kunwind_next_regs_pc(), so we
-	 * cannot consume that again here, but we know the regs are safe to
-	 * access.
-	 */
-	state->common.pc = state->regs->regs[30];
-	state->common.fp = state->regs->regs[29];
 	state->regs = NULL;
-	state->source = KUNWIND_SOURCE_REGS_LR;
-
+	state->source = KUNWIND_SOURCE_REGS_PC;
 	return 0;
 }
 
@@ -215,12 +203,12 @@ kunwind_next_frame_record_meta(struct kunwind_state *state)
 	case FRAME_META_TYPE_FINAL:
 		if (meta == &task_pt_regs(tsk)->stackframe)
 			return -ENOENT;
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(tsk == current);
 		return -EINVAL;
 	case FRAME_META_TYPE_PT_REGS:
 		return kunwind_next_regs_pc(state);
 	default:
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(tsk == current);
 		return -EINVAL;
 	}
 }
@@ -274,11 +262,8 @@ kunwind_next(struct kunwind_state *state)
 	case KUNWIND_SOURCE_FRAME:
 	case KUNWIND_SOURCE_CALLER:
 	case KUNWIND_SOURCE_TASK:
-	case KUNWIND_SOURCE_REGS_LR:
-		err = kunwind_next_frame_record(state);
-		break;
 	case KUNWIND_SOURCE_REGS_PC:
-		err = kunwind_next_regs_lr(state);
+		err = kunwind_next_frame_record(state);
 		break;
 	default:
 		err = -EINVAL;
@@ -294,21 +279,24 @@ kunwind_next(struct kunwind_state *state)
 
 typedef bool (*kunwind_consume_fn)(const struct kunwind_state *state, void *cookie);
 
-static __always_inline void
+static __always_inline int
 do_kunwind(struct kunwind_state *state, kunwind_consume_fn consume_state,
 	   void *cookie)
 {
-	if (kunwind_recover_return_address(state))
-		return;
+	int ret;
 
-	while (1) {
-		int ret;
+	ret = kunwind_recover_return_address(state);
+	if (ret)
+		return ret;
 
+	while (1) {
 		if (!consume_state(state, cookie))
-			break;
+			return -EINVAL;
 		ret = kunwind_next(state);
+		if (ret == -ENOENT)
+			return 0;
 		if (ret < 0)
-			break;
+			return ret;
 	}
 }
 
@@ -341,7 +329,7 @@ do_kunwind(struct kunwind_state *state, kunwind_consume_fn consume_state,
 			: stackinfo_get_unknown();		\
 	})
 
-static __always_inline void
+static __always_inline int
 kunwind_stack_walk(kunwind_consume_fn consume_state,
 		   void *cookie, struct task_struct *task,
 		   struct pt_regs *regs)
@@ -349,10 +337,8 @@ kunwind_stack_walk(kunwind_consume_fn consume_state,
 	struct stack_info stacks[] = {
 		stackinfo_get_task(task),
 		STACKINFO_CPU(irq),
-#if defined(CONFIG_VMAP_STACK)
 		STACKINFO_CPU(overflow),
-#endif
-#if defined(CONFIG_VMAP_STACK) && defined(CONFIG_ARM_SDE_INTERFACE)
+#if defined(CONFIG_ARM_SDE_INTERFACE)
 		STACKINFO_SDEI(normal),
 		STACKINFO_SDEI(critical),
 #endif
@@ -369,7 +355,7 @@ kunwind_stack_walk(kunwind_consume_fn consume_state,
 
 	if (regs) {
 		if (task != current)
-			return;
+			return -EINVAL;
 		kunwind_init_from_regs(&state, regs);
 	} else if (task == current) {
 		kunwind_init_from_caller(&state);
@@ -377,7 +363,7 @@ kunwind_stack_walk(kunwind_consume_fn consume_state,
 		kunwind_init_from_task(&state, task);
 	}
 
-	do_kunwind(&state, consume_state, cookie);
+	return do_kunwind(&state, consume_state, cookie);
 }
 
 struct kunwind_consume_entry_data {
@@ -404,6 +390,36 @@ noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
 	kunwind_stack_walk(arch_kunwind_consume_entry, &data, task, regs);
 }
 
+static __always_inline bool
+arch_reliable_kunwind_consume_entry(const struct kunwind_state *state, void *cookie)
+{
+	/*
+	 * At an exception boundary we can reliably consume the saved PC. We do
+	 * not know whether the LR was live when the exception was taken, and
+	 * so we cannot perform the next unwind step reliably.
+	 *
+	 * All that matters is whether the *entire* unwind is reliable, so give
+	 * up as soon as we hit an exception boundary.
+	 */
+	if (state->source == KUNWIND_SOURCE_REGS_PC)
+		return false;
+
+	return arch_kunwind_consume_entry(state, cookie);
+}
+
+noinline noinstr int arch_stack_walk_reliable(stack_trace_consume_fn consume_entry,
+					      void *cookie,
+					      struct task_struct *task)
+{
+	struct kunwind_consume_entry_data data = {
+		.consume_entry = consume_entry,
+		.cookie = cookie,
+	};
+
+	return kunwind_stack_walk(arch_reliable_kunwind_consume_entry, &data,
+				  task, NULL);
+}
+
 struct bpf_unwind_consume_entry_data {
 	bool (*consume_entry)(void *cookie, u64 ip, u64 sp, u64 fp);
 	void *cookie;
@@ -436,7 +452,6 @@ static const char *state_source_string(const struct kunwind_state *state)
 	case KUNWIND_SOURCE_CALLER:	return "C";
 	case KUNWIND_SOURCE_TASK:	return "T";
 	case KUNWIND_SOURCE_REGS_PC:	return "P";
-	case KUNWIND_SOURCE_REGS_LR:	return "L";
 	default:			return "U";
 	}
 }
diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index c442fcec6b9e..c062badd1a56 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -43,7 +43,7 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno,
 
 	add_random_kstack_offset();
 
-	if (scno < sc_nr) {
+	if (likely(scno < sc_nr)) {
 		syscall_fn_t syscall_fn;
 		syscall_fn = syscall_table[array_index_nospec(scno, sc_nr)];
 		ret = __invoke_syscall(regs, syscall_fn);
@@ -96,7 +96,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	 * (Similarly for HVC and SMC elsewhere.)
 	 */
 
-	if (flags & _TIF_MTE_ASYNC_FAULT) {
+	if (unlikely(flags & _TIF_MTE_ASYNC_FAULT)) {
 		/*
 		 * Process the asynchronous tag check fault before the actual
 		 * syscall. do_notify_resume() will send a signal to userspace
diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
index 1a2c72f3e7f8..5d24dc53799b 100644
--- a/arch/arm64/kernel/topology.c
+++ b/arch/arm64/kernel/topology.c
@@ -15,62 +15,16 @@
 #include <linux/arch_topology.h>
 #include <linux/cacheinfo.h>
 #include <linux/cpufreq.h>
+#include <linux/cpu_smt.h>
 #include <linux/init.h>
 #include <linux/percpu.h>
+#include <linux/sched/isolation.h>
+#include <linux/xarray.h>
 
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/topology.h>
 
-#ifdef CONFIG_ACPI
-static bool __init acpi_cpu_is_threaded(int cpu)
-{
-	int is_threaded = acpi_pptt_cpu_is_thread(cpu);
-
-	/*
-	 * if the PPTT doesn't have thread information, assume a homogeneous
-	 * machine and return the current CPU's thread state.
-	 */
-	if (is_threaded < 0)
-		is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK;
-
-	return !!is_threaded;
-}
-
-/*
- * Propagate the topology information of the processor_topology_node tree to the
- * cpu_topology array.
- */
-int __init parse_acpi_topology(void)
-{
-	int cpu, topology_id;
-
-	if (acpi_disabled)
-		return 0;
-
-	for_each_possible_cpu(cpu) {
-		topology_id = find_acpi_cpu_topology(cpu, 0);
-		if (topology_id < 0)
-			return topology_id;
-
-		if (acpi_cpu_is_threaded(cpu)) {
-			cpu_topology[cpu].thread_id = topology_id;
-			topology_id = find_acpi_cpu_topology(cpu, 1);
-			cpu_topology[cpu].core_id   = topology_id;
-		} else {
-			cpu_topology[cpu].thread_id  = -1;
-			cpu_topology[cpu].core_id    = topology_id;
-		}
-		topology_id = find_acpi_cpu_topology_cluster(cpu);
-		cpu_topology[cpu].cluster_id = topology_id;
-		topology_id = find_acpi_cpu_topology_package(cpu);
-		cpu_topology[cpu].package_id = topology_id;
-	}
-
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_ARM64_AMU_EXTN
 #define read_corecnt()	read_sysreg_s(SYS_AMEVCNTR0_CORE_EL0)
 #define read_constcnt()	read_sysreg_s(SYS_AMEVCNTR0_CONST_EL0)
@@ -88,18 +42,28 @@ int __init parse_acpi_topology(void)
  * initialized.
  */
 static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale) =  1UL << (2 * SCHED_CAPACITY_SHIFT);
-static DEFINE_PER_CPU(u64, arch_const_cycles_prev);
-static DEFINE_PER_CPU(u64, arch_core_cycles_prev);
 static cpumask_var_t amu_fie_cpus;
 
+struct amu_cntr_sample {
+	u64		arch_const_cycles_prev;
+	u64		arch_core_cycles_prev;
+	unsigned long	last_scale_update;
+};
+
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct amu_cntr_sample, cpu_amu_samples);
+
 void update_freq_counters_refs(void)
 {
-	this_cpu_write(arch_core_cycles_prev, read_corecnt());
-	this_cpu_write(arch_const_cycles_prev, read_constcnt());
+	struct amu_cntr_sample *amu_sample = this_cpu_ptr(&cpu_amu_samples);
+
+	amu_sample->arch_core_cycles_prev = read_corecnt();
+	amu_sample->arch_const_cycles_prev = read_constcnt();
 }
 
 static inline bool freq_counters_valid(int cpu)
 {
+	struct amu_cntr_sample *amu_sample = per_cpu_ptr(&cpu_amu_samples, cpu);
+
 	if ((cpu >= nr_cpu_ids) || !cpumask_test_cpu(cpu, cpu_present_mask))
 		return false;
 
@@ -108,8 +72,8 @@ static inline bool freq_counters_valid(int cpu)
 		return false;
 	}
 
-	if (unlikely(!per_cpu(arch_const_cycles_prev, cpu) ||
-		     !per_cpu(arch_core_cycles_prev, cpu))) {
+	if (unlikely(!amu_sample->arch_const_cycles_prev ||
+		     !amu_sample->arch_core_cycles_prev)) {
 		pr_debug("CPU%d: cycle counters are not enabled.\n", cpu);
 		return false;
 	}
@@ -152,17 +116,22 @@ void freq_inv_set_max_ratio(int cpu, u64 max_rate)
 
 static void amu_scale_freq_tick(void)
 {
+	struct amu_cntr_sample *amu_sample = this_cpu_ptr(&cpu_amu_samples);
 	u64 prev_core_cnt, prev_const_cnt;
 	u64 core_cnt, const_cnt, scale;
 
-	prev_const_cnt = this_cpu_read(arch_const_cycles_prev);
-	prev_core_cnt = this_cpu_read(arch_core_cycles_prev);
+	prev_const_cnt = amu_sample->arch_const_cycles_prev;
+	prev_core_cnt = amu_sample->arch_core_cycles_prev;
 
 	update_freq_counters_refs();
 
-	const_cnt = this_cpu_read(arch_const_cycles_prev);
-	core_cnt = this_cpu_read(arch_core_cycles_prev);
+	const_cnt = amu_sample->arch_const_cycles_prev;
+	core_cnt = amu_sample->arch_core_cycles_prev;
 
+	/*
+	 * This should not happen unless the AMUs have been reset and the
+	 * counter values have not been restored - unlikely
+	 */
 	if (unlikely(core_cnt <= prev_core_cnt ||
 		     const_cnt <= prev_const_cnt))
 		return;
@@ -182,6 +151,8 @@ static void amu_scale_freq_tick(void)
 
 	scale = min_t(unsigned long, scale, SCHED_CAPACITY_SCALE);
 	this_cpu_write(arch_freq_scale, (unsigned long)scale);
+
+	amu_sample->last_scale_update = jiffies;
 }
 
 static struct scale_freq_data amu_sfd = {
@@ -189,17 +160,114 @@ static struct scale_freq_data amu_sfd = {
 	.set_freq_scale = amu_scale_freq_tick,
 };
 
+static __always_inline bool amu_fie_cpu_supported(unsigned int cpu)
+{
+	return cpumask_available(amu_fie_cpus) &&
+		cpumask_test_cpu(cpu, amu_fie_cpus);
+}
+
+void arch_cpu_idle_enter(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (!amu_fie_cpu_supported(cpu))
+		return;
+
+	/* Kick in AMU update but only if one has not happened already */
+	if (housekeeping_cpu(cpu, HK_TYPE_TICK) &&
+	    time_is_before_jiffies(per_cpu(cpu_amu_samples.last_scale_update, cpu)))
+		amu_scale_freq_tick();
+}
+
+#define AMU_SAMPLE_EXP_MS	20
+
+int arch_freq_get_on_cpu(int cpu)
+{
+	struct amu_cntr_sample *amu_sample;
+	unsigned int start_cpu = cpu;
+	unsigned long last_update;
+	unsigned int freq = 0;
+	u64 scale;
+
+	if (!amu_fie_cpu_supported(cpu) || !arch_scale_freq_ref(cpu))
+		return -EOPNOTSUPP;
+
+	while (1) {
+
+		amu_sample = per_cpu_ptr(&cpu_amu_samples, cpu);
+
+		last_update = amu_sample->last_scale_update;
+
+		/*
+		 * For those CPUs that are in full dynticks mode, or those that have
+		 * not seen tick for a while, try an alternative source for the counters
+		 * (and thus freq scale), if available, for given policy: this boils
+		 * down to identifying an active cpu within the same freq domain, if any.
+		 */
+		if (!housekeeping_cpu(cpu, HK_TYPE_TICK) ||
+		    time_is_before_jiffies(last_update + msecs_to_jiffies(AMU_SAMPLE_EXP_MS))) {
+			struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+			int ref_cpu;
+
+			if (!policy)
+				return -EINVAL;
+
+			if (!cpumask_intersects(policy->related_cpus,
+						housekeeping_cpumask(HK_TYPE_TICK))) {
+				cpufreq_cpu_put(policy);
+				return -EOPNOTSUPP;
+			}
+
+			for_each_cpu_wrap(ref_cpu, policy->cpus, cpu + 1) {
+				if (ref_cpu == start_cpu) {
+					/* Prevent verifying same CPU twice */
+					ref_cpu = nr_cpu_ids;
+					break;
+				}
+				if (!idle_cpu(ref_cpu))
+					break;
+			}
+
+			cpufreq_cpu_put(policy);
+
+			if (ref_cpu >= nr_cpu_ids)
+				/* No alternative to pull info from */
+				return -EAGAIN;
+
+			cpu = ref_cpu;
+		} else {
+			break;
+		}
+	}
+	/*
+	 * Reversed computation to the one used to determine
+	 * the arch_freq_scale value
+	 * (see amu_scale_freq_tick for details)
+	 */
+	scale = arch_scale_freq_capacity(cpu);
+	freq = scale * arch_scale_freq_ref(cpu);
+	freq >>= SCHED_CAPACITY_SHIFT;
+	return freq;
+}
+
 static void amu_fie_setup(const struct cpumask *cpus)
 {
 	int cpu;
 
 	/* We are already set since the last insmod of cpufreq driver */
-	if (unlikely(cpumask_subset(cpus, amu_fie_cpus)))
+	if (cpumask_available(amu_fie_cpus) &&
+	    unlikely(cpumask_subset(cpus, amu_fie_cpus)))
 		return;
 
-	for_each_cpu(cpu, cpus) {
+	for_each_cpu(cpu, cpus)
 		if (!freq_counters_valid(cpu))
 			return;
+
+	if (!cpumask_available(amu_fie_cpus) &&
+	    !zalloc_cpumask_var(&amu_fie_cpus, GFP_KERNEL)) {
+		WARN_ONCE(1, "Failed to allocate FIE cpumask for CPUs[%*pbl]\n",
+			  cpumask_pr_args(cpus));
+		return;
 	}
 
 	cpumask_or(amu_fie_cpus, amu_fie_cpus, cpus);
@@ -237,17 +305,8 @@ static struct notifier_block init_amu_fie_notifier = {
 
 static int __init init_amu_fie(void)
 {
-	int ret;
-
-	if (!zalloc_cpumask_var(&amu_fie_cpus, GFP_KERNEL))
-		return -ENOMEM;
-
-	ret = cpufreq_register_notifier(&init_amu_fie_notifier,
+	return cpufreq_register_notifier(&init_amu_fie_notifier,
 					CPUFREQ_POLICY_NOTIFIER);
-	if (ret)
-		free_cpumask_var(amu_fie_cpus);
-
-	return ret;
 }
 core_initcall(init_amu_fie);
 
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 4e26bd356a48..914282016069 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -149,19 +149,18 @@ pstate_check_t * const aarch32_opcode_cond_checks[16] = {
 
 int show_unhandled_signals = 0;
 
-static void dump_kernel_instr(const char *lvl, struct pt_regs *regs)
+void dump_kernel_instr(unsigned long kaddr)
 {
-	unsigned long addr = instruction_pointer(regs);
 	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
 	int i;
 
-	if (user_mode(regs))
+	if (!is_ttbr1_addr(kaddr))
 		return;
 
 	for (i = -4; i < 1; i++) {
 		unsigned int val, bad;
 
-		bad = aarch64_insn_read(&((u32 *)addr)[i], &val);
+		bad = aarch64_insn_read(&((u32 *)kaddr)[i], &val);
 
 		if (!bad)
 			p += sprintf(p, i == 0 ? "(%08x) " : "%08x ", val);
@@ -169,25 +168,18 @@ static void dump_kernel_instr(const char *lvl, struct pt_regs *regs)
 			p += sprintf(p, i == 0 ? "(????????) " : "???????? ");
 	}
 
-	printk("%sCode: %s\n", lvl, str);
+	printk(KERN_EMERG "Code: %s\n", str);
 }
 
-#ifdef CONFIG_PREEMPT
-#define S_PREEMPT " PREEMPT"
-#elif defined(CONFIG_PREEMPT_RT)
-#define S_PREEMPT " PREEMPT_RT"
-#else
-#define S_PREEMPT ""
-#endif
-
 #define S_SMP " SMP"
 
 static int __die(const char *str, long err, struct pt_regs *regs)
 {
 	static int die_counter;
 	int ret;
+	unsigned long addr = instruction_pointer(regs);
 
-	pr_emerg("Internal error: %s: %016lx [#%d]" S_PREEMPT S_SMP "\n",
+	pr_emerg("Internal error: %s: %016lx [#%d] " S_SMP "\n",
 		 str, err, ++die_counter);
 
 	/* trap and error numbers are mostly meaningless on ARM */
@@ -198,7 +190,10 @@ static int __die(const char *str, long err, struct pt_regs *regs)
 	print_modules();
 	show_regs(regs);
 
-	dump_kernel_instr(KERN_EMERG, regs);
+	if (user_mode(regs))
+		return ret;
+
+	dump_kernel_instr(addr);
 
 	return ret;
 }
@@ -462,7 +457,7 @@ void do_el0_undef(struct pt_regs *regs, unsigned long esr)
 	u32 insn;
 
 	/* check for AArch32 breakpoint instructions */
-	if (!aarch32_break_handler(regs))
+	if (try_handle_aarch32_break(regs))
 		return;
 
 	if (user_insn_read(regs, &insn))
@@ -902,8 +897,6 @@ void bad_el0_sync(struct pt_regs *regs, int reason, unsigned long esr)
 			      "Bad EL0 synchronous exception");
 }
 
-#ifdef CONFIG_VMAP_STACK
-
 DEFINE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack)
 	__aligned(16);
 
@@ -929,16 +922,16 @@ void __noreturn panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigne
 	__show_regs(regs);
 
 	/*
-	 * We use nmi_panic to limit the potential for recusive overflows, and
+	 * We use nmi_panic to limit the potential for recursive overflows, and
 	 * to get a better stack trace.
 	 */
 	nmi_panic(NULL, "kernel stack overflow");
 	cpu_park_loop();
 }
-#endif
 
 void __noreturn arm64_serror_panic(struct pt_regs *regs, unsigned long esr)
 {
+	add_taint(TAINT_MACHINE_CHECK, LOCKDEP_STILL_OK);
 	console_verbose();
 
 	pr_crit("SError Interrupt on CPU%d, code 0x%016lx -- %s\n",
@@ -995,7 +988,7 @@ void do_serror(struct pt_regs *regs, unsigned long esr)
 int is_valid_bugaddr(unsigned long addr)
 {
 	/*
-	 * bug_handler() only called for BRK #BUG_BRK_IMM.
+	 * bug_brk_handler() only called for BRK #BUG_BRK_IMM.
 	 * So the answer is trivial -- any spurious instances with no
 	 * bug table entry will be rejected by report_bug() and passed
 	 * back to the debug-monitors code and handled as a fatal
@@ -1005,7 +998,7 @@ int is_valid_bugaddr(unsigned long addr)
 }
 #endif
 
-static int bug_handler(struct pt_regs *regs, unsigned long esr)
+int bug_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
 	switch (report_bug(regs->pc, regs)) {
 	case BUG_TRAP_TYPE_BUG:
@@ -1025,13 +1018,8 @@ static int bug_handler(struct pt_regs *regs, unsigned long esr)
 	return DBG_HOOK_HANDLED;
 }
 
-static struct break_hook bug_break_hook = {
-	.fn = bug_handler,
-	.imm = BUG_BRK_IMM,
-};
-
-#ifdef CONFIG_CFI_CLANG
-static int cfi_handler(struct pt_regs *regs, unsigned long esr)
+#ifdef CONFIG_CFI
+int cfi_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
 	unsigned long target;
 	u32 type;
@@ -1054,15 +1042,9 @@ static int cfi_handler(struct pt_regs *regs, unsigned long esr)
 	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
 	return DBG_HOOK_HANDLED;
 }
+#endif /* CONFIG_CFI */
 
-static struct break_hook cfi_break_hook = {
-	.fn = cfi_handler,
-	.imm = CFI_BRK_IMM_BASE,
-	.mask = CFI_BRK_IMM_MASK,
-};
-#endif /* CONFIG_CFI_CLANG */
-
-static int reserved_fault_handler(struct pt_regs *regs, unsigned long esr)
+int reserved_fault_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
 	pr_err("%s generated an invalid instruction at %pS!\n",
 		"Kernel text patching",
@@ -1072,11 +1054,6 @@ static int reserved_fault_handler(struct pt_regs *regs, unsigned long esr)
 	return DBG_HOOK_ERROR;
 }
 
-static struct break_hook fault_break_hook = {
-	.fn = reserved_fault_handler,
-	.imm = FAULT_BRK_IMM,
-};
-
 #ifdef CONFIG_KASAN_SW_TAGS
 
 #define KASAN_ESR_RECOVER	0x20
@@ -1084,7 +1061,7 @@ static struct break_hook fault_break_hook = {
 #define KASAN_ESR_SIZE_MASK	0x0f
 #define KASAN_ESR_SIZE(esr)	(1 << ((esr) & KASAN_ESR_SIZE_MASK))
 
-static int kasan_handler(struct pt_regs *regs, unsigned long esr)
+int kasan_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
 	bool recover = esr & KASAN_ESR_RECOVER;
 	bool write = esr & KASAN_ESR_WRITE;
@@ -1115,62 +1092,12 @@ static int kasan_handler(struct pt_regs *regs, unsigned long esr)
 	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
 	return DBG_HOOK_HANDLED;
 }
-
-static struct break_hook kasan_break_hook = {
-	.fn	= kasan_handler,
-	.imm	= KASAN_BRK_IMM,
-	.mask	= KASAN_BRK_MASK,
-};
 #endif
 
 #ifdef CONFIG_UBSAN_TRAP
-static int ubsan_handler(struct pt_regs *regs, unsigned long esr)
+int ubsan_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
-	die(report_ubsan_failure(regs, esr & UBSAN_BRK_MASK), regs, esr);
+	die(report_ubsan_failure(esr & UBSAN_BRK_MASK), regs, esr);
 	return DBG_HOOK_HANDLED;
 }
-
-static struct break_hook ubsan_break_hook = {
-	.fn	= ubsan_handler,
-	.imm	= UBSAN_BRK_IMM,
-	.mask	= UBSAN_BRK_MASK,
-};
-#endif
-
-/*
- * Initial handler for AArch64 BRK exceptions
- * This handler only used until debug_traps_init().
- */
-int __init early_brk64(unsigned long addr, unsigned long esr,
-		struct pt_regs *regs)
-{
-#ifdef CONFIG_CFI_CLANG
-	if (esr_is_cfi_brk(esr))
-		return cfi_handler(regs, esr) != DBG_HOOK_HANDLED;
-#endif
-#ifdef CONFIG_KASAN_SW_TAGS
-	if ((esr_brk_comment(esr) & ~KASAN_BRK_MASK) == KASAN_BRK_IMM)
-		return kasan_handler(regs, esr) != DBG_HOOK_HANDLED;
-#endif
-#ifdef CONFIG_UBSAN_TRAP
-	if ((esr_brk_comment(esr) & ~UBSAN_BRK_MASK) == UBSAN_BRK_IMM)
-		return ubsan_handler(regs, esr) != DBG_HOOK_HANDLED;
 #endif
-	return bug_handler(regs, esr) != DBG_HOOK_HANDLED;
-}
-
-void __init trap_init(void)
-{
-	register_kernel_break_hook(&bug_break_hook);
-#ifdef CONFIG_CFI_CLANG
-	register_kernel_break_hook(&cfi_break_hook);
-#endif
-	register_kernel_break_hook(&fault_break_hook);
-#ifdef CONFIG_KASAN_SW_TAGS
-	register_kernel_break_hook(&kasan_break_hook);
-#endif
-#ifdef CONFIG_UBSAN_TRAP
-	register_kernel_break_hook(&ubsan_break_hook);
-#endif
-	debug_traps_init();
-}
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index e8ed8e5b713b..78ddf6bdecad 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -18,7 +18,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/slab.h>
-#include <linux/time_namespace.h>
+#include <linux/vdso_datastore.h>
 #include <linux/vmalloc.h>
 #include <vdso/datapage.h>
 #include <vdso/helpers.h>
@@ -57,12 +57,6 @@ static struct vdso_abi_info vdso_info[] __ro_after_init = {
 #endif /* CONFIG_COMPAT_VDSO */
 };
 
-/*
- * The vDSO data page.
- */
-static union vdso_data_store vdso_data_store __page_aligned_data;
-struct vdso_data *vdso_data = vdso_data_store.data;
-
 static int vdso_mremap(const struct vm_special_mapping *sm,
 		struct vm_area_struct *new_vma)
 {
@@ -104,78 +98,6 @@ static int __init __vdso_init(enum vdso_abi abi)
 	return 0;
 }
 
-#ifdef CONFIG_TIME_NS
-struct vdso_data *arch_get_vdso_data(void *vvar_page)
-{
-	return (struct vdso_data *)(vvar_page);
-}
-
-static const struct vm_special_mapping vvar_map;
-
-/*
- * The vvar mapping contains data for a specific time namespace, so when a task
- * changes namespace we must unmap its vvar data for the old namespace.
- * Subsequent faults will map in data for the new namespace.
- *
- * For more details see timens_setup_vdso_data().
- */
-int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
-{
-	struct mm_struct *mm = task->mm;
-	struct vm_area_struct *vma;
-	VMA_ITERATOR(vmi, mm, 0);
-
-	mmap_read_lock(mm);
-
-	for_each_vma(vmi, vma) {
-		if (vma_is_special_mapping(vma, &vvar_map))
-			zap_vma_pages(vma);
-	}
-
-	mmap_read_unlock(mm);
-	return 0;
-}
-#endif
-
-static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
-			     struct vm_area_struct *vma, struct vm_fault *vmf)
-{
-	struct page *timens_page = find_timens_vvar_page(vma);
-	unsigned long pfn;
-
-	switch (vmf->pgoff) {
-	case VVAR_DATA_PAGE_OFFSET:
-		if (timens_page)
-			pfn = page_to_pfn(timens_page);
-		else
-			pfn = sym_to_pfn(vdso_data);
-		break;
-#ifdef CONFIG_TIME_NS
-	case VVAR_TIMENS_PAGE_OFFSET:
-		/*
-		 * If a task belongs to a time namespace then a namespace
-		 * specific VVAR is mapped with the VVAR_DATA_PAGE_OFFSET and
-		 * the real VVAR page is mapped with the VVAR_TIMENS_PAGE_OFFSET
-		 * offset.
-		 * See also the comment near timens_setup_vdso_data().
-		 */
-		if (!timens_page)
-			return VM_FAULT_SIGBUS;
-		pfn = sym_to_pfn(vdso_data);
-		break;
-#endif /* CONFIG_TIME_NS */
-	default:
-		return VM_FAULT_SIGBUS;
-	}
-
-	return vmf_insert_pfn(vma, vmf->address, pfn);
-}
-
-static const struct vm_special_mapping vvar_map = {
-	.name   = "[vvar]",
-	.fault = vvar_fault,
-};
-
 static int __setup_additional_pages(enum vdso_abi abi,
 				    struct mm_struct *mm,
 				    struct linux_binprm *bprm,
@@ -185,11 +107,11 @@ static int __setup_additional_pages(enum vdso_abi abi,
 	unsigned long gp_flags = 0;
 	void *ret;
 
-	BUILD_BUG_ON(VVAR_NR_PAGES != __VVAR_PAGES);
+	BUILD_BUG_ON(VDSO_NR_PAGES != __VDSO_PAGES);
 
 	vdso_text_len = vdso_info[abi].vdso_pages << PAGE_SHIFT;
 	/* Be sure to map the data page */
-	vdso_mapping_len = vdso_text_len + VVAR_NR_PAGES * PAGE_SIZE;
+	vdso_mapping_len = vdso_text_len + VDSO_NR_PAGES * PAGE_SIZE;
 
 	vdso_base = get_unmapped_area(NULL, 0, vdso_mapping_len, 0, 0);
 	if (IS_ERR_VALUE(vdso_base)) {
@@ -197,20 +119,19 @@ static int __setup_additional_pages(enum vdso_abi abi,
 		goto up_fail;
 	}
 
-	ret = _install_special_mapping(mm, vdso_base, VVAR_NR_PAGES * PAGE_SIZE,
-				       VM_READ|VM_MAYREAD|VM_PFNMAP,
-				       &vvar_map);
+	ret = vdso_install_vvar_mapping(mm, vdso_base);
 	if (IS_ERR(ret))
 		goto up_fail;
 
 	if (system_supports_bti_kernel())
 		gp_flags = VM_ARM64_BTI;
 
-	vdso_base += VVAR_NR_PAGES * PAGE_SIZE;
+	vdso_base += VDSO_NR_PAGES * PAGE_SIZE;
 	mm->context.vdso = (void *)vdso_base;
 	ret = _install_special_mapping(mm, vdso_base, vdso_text_len,
 				       VM_READ|VM_EXEC|gp_flags|
-				       VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
+				       VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
+				       VM_SEALED_SYSMAP,
 				       vdso_info[abi].cm);
 	if (IS_ERR(ret))
 		goto up_fail;
@@ -336,7 +257,8 @@ static int aarch32_kuser_helpers_setup(struct mm_struct *mm)
 	 */
 	ret = _install_special_mapping(mm, AARCH32_VECTORS_BASE, PAGE_SIZE,
 				       VM_READ | VM_EXEC |
-				       VM_MAYREAD | VM_MAYEXEC,
+				       VM_MAYREAD | VM_MAYEXEC |
+				       VM_SEALED_SYSMAP,
 				       &aarch32_vdso_maps[AA32_MAP_VECTORS]);
 
 	return PTR_ERR_OR_ZERO(ret);
@@ -359,7 +281,8 @@ static int aarch32_sigreturn_setup(struct mm_struct *mm)
 	 */
 	ret = _install_special_mapping(mm, addr, PAGE_SIZE,
 				       VM_READ | VM_EXEC | VM_MAYREAD |
-				       VM_MAYWRITE | VM_MAYEXEC,
+				       VM_MAYWRITE | VM_MAYEXEC |
+				       VM_SEALED_SYSMAP,
 				       &aarch32_vdso_maps[AA32_MAP_SIGPAGE]);
 	if (IS_ERR(ret))
 		goto out;
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index 35685c036044..7dec05dd33b7 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -7,7 +7,7 @@
 #
 
 # Include the generic Makefile to check the built vdso.
-include $(srctree)/lib/vdso/Makefile
+include $(srctree)/lib/vdso/Makefile.include
 
 obj-vdso := vgettimeofday.o note.o sigreturn.o vgetrandom.o vgetrandom-chacha.o
 
@@ -36,7 +36,8 @@ ccflags-y += -DDISABLE_BRANCH_PROFILING -DBUILD_VDSO
 # -Wmissing-prototypes and -Wmissing-declarations are removed from
 # the CFLAGS to make possible to build the kernel with CONFIG_WERROR enabled.
 CC_FLAGS_REMOVE_VDSO := $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) \
-			$(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS) \
+			$(RANDSTRUCT_CFLAGS) $(KSTACK_ERASE_CFLAGS) \
+			$(GCC_PLUGINS_CFLAGS) \
 			$(CC_FLAGS_LTO) $(CC_FLAGS_CFI) \
 			-Wmissing-prototypes -Wmissing-declarations
 
diff --git a/arch/arm64/kernel/vdso/vdso.lds.S b/arch/arm64/kernel/vdso/vdso.lds.S
index 4ec32e86a8da..52314be29191 100644
--- a/arch/arm64/kernel/vdso/vdso.lds.S
+++ b/arch/arm64/kernel/vdso/vdso.lds.S
@@ -20,11 +20,8 @@ OUTPUT_ARCH(aarch64)
 
 SECTIONS
 {
-	PROVIDE(_vdso_data = . - __VVAR_PAGES * PAGE_SIZE);
-	PROVIDE(_vdso_rng_data = _vdso_data + __VDSO_RND_DATA_OFFSET);
-#ifdef CONFIG_TIME_NS
-	PROVIDE(_timens_data = _vdso_data + PAGE_SIZE);
-#endif
+	VDSO_VVAR_SYMS
+
 	. = SIZEOF_HEADERS;
 
 	.hash		: { *(.hash) }			:text
@@ -41,6 +38,7 @@ SECTIONS
 	 */
 	/DISCARD/	: {
 		*(.note.GNU-stack .note.gnu.property)
+		*(.ARM.attributes)
 	}
 	.note		: { *(.note.*) }		:text	:note
 
diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
index 25a2cb6317f3..9d0efed91414 100644
--- a/arch/arm64/kernel/vdso32/Makefile
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -3,7 +3,7 @@
 # Makefile for vdso32
 #
 
-include $(srctree)/lib/vdso/Makefile
+include $(srctree)/lib/vdso/Makefile.include
 
 # Same as cc-*option, but using CC_COMPAT instead of CC
 ifeq ($(CONFIG_CC_IS_CLANG), y)
@@ -21,8 +21,6 @@ endif
 
 cc32-option = $(call try-run,\
         $(CC_COMPAT) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2))
-cc32-disable-warning = $(call try-run,\
-	$(CC_COMPAT) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
 
 # We cannot use the global flags to compile the vDSO files, the main reason
 # being that the 32-bit compiler may be older than the main (64-bit) compiler
@@ -59,13 +57,13 @@ VDSO_CAFLAGS += -DDISABLE_BRANCH_PROFILING
 VDSO_CAFLAGS += -march=armv8-a
 
 VDSO_CFLAGS := $(VDSO_CAFLAGS)
-VDSO_CFLAGS += -DENABLE_COMPAT_VDSO=1
 # KBUILD_CFLAGS from top-level Makefile
 VDSO_CFLAGS += -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
                -fno-strict-aliasing -fno-common \
+               $(filter -Werror,$(KBUILD_CPPFLAGS)) \
                -Werror-implicit-function-declaration \
                -Wno-format-security \
-               -std=gnu11
+               -std=gnu11 -fms-extensions
 VDSO_CFLAGS  += -O2
 # Some useful compiler-dependent flags from top-level Makefile
 VDSO_CFLAGS += $(call cc32-option,-Wno-pointer-sign)
@@ -73,16 +71,7 @@ VDSO_CFLAGS += -fno-strict-overflow
 VDSO_CFLAGS += $(call cc32-option,-Werror=strict-prototypes)
 VDSO_CFLAGS += -Werror=date-time
 VDSO_CFLAGS += $(call cc32-option,-Werror=incompatible-pointer-types)
-
-# The 32-bit compiler does not provide 128-bit integers, which are used in
-# some headers that are indirectly included from the vDSO code.
-# This hack makes the compiler happy and should trigger a warning/error if
-# variables of such type are referenced.
-VDSO_CFLAGS += -D__uint128_t='void*'
-# Silence some warnings coming from headers that operate on long's
-# (on GCC 4.8 or older, there is unfortunately no way to silence this warning)
-VDSO_CFLAGS += $(call cc32-disable-warning,shift-count-overflow)
-VDSO_CFLAGS += -Wno-int-to-pointer-cast
+VDSO_CFLAGS += $(if $(CONFIG_CC_IS_CLANG),-Wno-microsoft-anon-tag)
 
 # Compile as THUMB2 or ARM. Unwinding via frame-pointers in THUMB2 is
 # unreliable.
diff --git a/arch/arm64/kernel/vdso32/vdso.lds.S b/arch/arm64/kernel/vdso32/vdso.lds.S
index 732702a187e9..e02b27487ce8 100644
--- a/arch/arm64/kernel/vdso32/vdso.lds.S
+++ b/arch/arm64/kernel/vdso32/vdso.lds.S
@@ -12,16 +12,15 @@
 #include <asm/page.h>
 #include <asm/vdso.h>
 #include <asm-generic/vmlinux.lds.h>
+#include <vdso/datapage.h>
 
 OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
 OUTPUT_ARCH(arm)
 
 SECTIONS
 {
-	PROVIDE_HIDDEN(_vdso_data = . - __VVAR_PAGES * PAGE_SIZE);
-#ifdef CONFIG_TIME_NS
-	PROVIDE_HIDDEN(_timens_data = _vdso_data + PAGE_SIZE);
-#endif
+	VDSO_VVAR_SYMS
+
 	. = SIZEOF_HEADERS;
 
 	.hash		: { *(.hash) }			:text
diff --git a/arch/arm64/kernel/vmcore_info.c b/arch/arm64/kernel/vmcore_info.c
index b19d5d6cb8b3..9619ece66b79 100644
--- a/arch/arm64/kernel/vmcore_info.c
+++ b/arch/arm64/kernel/vmcore_info.c
@@ -14,7 +14,7 @@ static inline u64 get_tcr_el1_t1sz(void);
 
 static inline u64 get_tcr_el1_t1sz(void)
 {
-	return (read_sysreg(tcr_el1) & TCR_T1SZ_MASK) >> TCR_T1SZ_OFFSET;
+	return (read_sysreg(tcr_el1) & TCR_EL1_T1SZ_MASK) >> TCR_EL1_T1SZ_SHIFT;
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index f84c71f04d9e..ad6133b89e7a 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -13,7 +13,7 @@
 	*(__kvm_ex_table)					\
 	__stop___kvm_ex_table = .;
 
-#define HYPERVISOR_DATA_SECTIONS				\
+#define HYPERVISOR_RODATA_SECTIONS				\
 	HYP_SECTION_NAME(.rodata) : {				\
 		. = ALIGN(PAGE_SIZE);				\
 		__hyp_rodata_start = .;				\
@@ -23,6 +23,15 @@
 		__hyp_rodata_end = .;				\
 	}
 
+#define HYPERVISOR_DATA_SECTION					\
+	HYP_SECTION_NAME(.data) : {				\
+		. = ALIGN(PAGE_SIZE);				\
+		__hyp_data_start = .;				\
+		*(HYP_SECTION_NAME(.data))			\
+		. = ALIGN(PAGE_SIZE);				\
+		__hyp_data_end = .;				\
+	}
+
 #define HYPERVISOR_PERCPU_SECTION				\
 	. = ALIGN(PAGE_SIZE);					\
 	HYP_SECTION_NAME(.data..percpu) : {			\
@@ -51,7 +60,8 @@
 #define SBSS_ALIGN			PAGE_SIZE
 #else /* CONFIG_KVM */
 #define HYPERVISOR_EXTABLE
-#define HYPERVISOR_DATA_SECTIONS
+#define HYPERVISOR_RODATA_SECTIONS
+#define HYPERVISOR_DATA_SECTION
 #define HYPERVISOR_PERCPU_SECTION
 #define HYPERVISOR_RELOC_SECTION
 #define SBSS_ALIGN			0
@@ -162,6 +172,7 @@ SECTIONS
 	/DISCARD/ : {
 		*(.interp .dynamic)
 		*(.dynsym .dynstr .hash .gnu.hash)
+		*(.ARM.attributes)
 	}
 
 	. = KIMAGE_VADDR;
@@ -189,7 +200,7 @@ SECTIONS
 	/* everything from this point to __init_begin will be marked RO NX */
 	RO_DATA(PAGE_SIZE)
 
-	HYPERVISOR_DATA_SECTIONS
+	HYPERVISOR_RODATA_SECTIONS
 
 	.got : { *(.got) }
 	/*
@@ -248,9 +259,9 @@ SECTIONS
 	__inittext_end = .;
 	__initdata_begin = .;
 
-	init_idmap_pg_dir = .;
+	__pi_init_idmap_pg_dir = .;
 	. += INIT_IDMAP_DIR_SIZE;
-	init_idmap_pg_end = .;
+	__pi_init_idmap_pg_end = .;
 
 	.init.data : {
 		INIT_DATA
@@ -294,6 +305,8 @@ SECTIONS
 	_sdata = .;
 	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN)
 
+	HYPERVISOR_DATA_SECTION
+
 	/*
 	 * Data written with the MMU off but read with the MMU on requires
 	 * cache lines to be invalidated, discarding up to a Cache Writeback
@@ -318,11 +331,12 @@ SECTIONS
 
 	/* start of zero-init region */
 	BSS_SECTION(SBSS_ALIGN, 0, 0)
+	__pi___bss_start = __bss_start;
 
 	. = ALIGN(PAGE_SIZE);
-	init_pg_dir = .;
+	__pi_init_pg_dir = .;
 	. += INIT_DIR_SIZE;
-	init_pg_end = .;
+	__pi_init_pg_end = .;
 	/* end of zero-init region */
 
 	. += SZ_4K;		/* stack for the early C runtime */
@@ -331,6 +345,7 @@ SECTIONS
 	. = ALIGN(SEGMENT_ALIGN);
 	__pecoff_data_size = ABSOLUTE(. - __initdata_begin);
 	_end = .;
+	__pi__end = .;
 
 	STABS_DEBUG
 	DWARF_DEBUG
diff --git a/arch/arm64/kernel/watchdog_hld.c b/arch/arm64/kernel/watchdog_hld.c
index dcd25322127c..3093037dcb7b 100644
--- a/arch/arm64/kernel/watchdog_hld.c
+++ b/arch/arm64/kernel/watchdog_hld.c
@@ -34,3 +34,61 @@ bool __init arch_perf_nmi_is_available(void)
 	 */
 	return arm_pmu_irq_is_nmi();
 }
+
+static int watchdog_perf_update_period(void *data)
+{
+	int cpu = smp_processor_id();
+	u64 max_cpu_freq, new_period;
+
+	max_cpu_freq = cpufreq_get_hw_max_freq(cpu) * 1000UL;
+	if (!max_cpu_freq)
+		return 0;
+
+	new_period = watchdog_thresh * max_cpu_freq;
+	hardlockup_detector_perf_adjust_period(new_period);
+
+	return 0;
+}
+
+static int watchdog_freq_notifier_callback(struct notifier_block *nb,
+					   unsigned long val, void *data)
+{
+	struct cpufreq_policy *policy = data;
+	int cpu;
+
+	if (val != CPUFREQ_CREATE_POLICY)
+		return NOTIFY_DONE;
+
+	/*
+	 * Let each online CPU related to the policy update the period by their
+	 * own. This will serialize with the framework on start/stop the lockup
+	 * detector (softlockup_{start,stop}_all) and avoid potential race
+	 * condition. Otherwise we may have below theoretical race condition:
+	 * (core 0/1 share the same policy)
+	 * [core 0]                      [core 1]
+	 *                               hardlockup_detector_event_create()
+	 *                                 hw_nmi_get_sample_period()
+	 * (cpufreq registered, notifier callback invoked)
+	 * watchdog_freq_notifier_callback()
+	 *   watchdog_perf_update_period()
+	 *   (since core 1's event's not yet created,
+	 *    the period is not set)
+	 *                                 perf_event_create_kernel_counter()
+	 *                                 (event's period is SAFE_MAX_CPU_FREQ)
+	 */
+	for_each_cpu(cpu, policy->cpus)
+		smp_call_on_cpu(cpu, watchdog_perf_update_period, NULL, false);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block watchdog_freq_notifier = {
+	.notifier_call = watchdog_freq_notifier_callback,
+};
+
+static int __init init_watchdog_freq_notifier(void)
+{
+	return cpufreq_register_notifier(&watchdog_freq_notifier,
+					 CPUFREQ_POLICY_NOTIFIER);
+}
+core_initcall(init_watchdog_freq_notifier);
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index ead632ad01b4..4f803fd1c99a 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -19,14 +19,13 @@ if VIRTUALIZATION
 
 menuconfig KVM
 	bool "Kernel-based Virtual Machine (KVM) support"
-	depends on AS_HAS_ARMV8_4
 	select KVM_COMMON
 	select KVM_GENERIC_HARDWARE_ENABLING
 	select KVM_GENERIC_MMU_NOTIFIER
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select KVM_MMIO
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
-	select KVM_XFER_TO_GUEST_WORK
+	select VIRT_XFER_TO_GUEST_WORK
 	select KVM_VFIO
 	select HAVE_KVM_DIRTY_RING_ACQ_REL
 	select NEED_KVM_DIRTY_RING_WITH_BITMAP
@@ -38,6 +37,7 @@ menuconfig KVM
 	select HAVE_KVM_VCPU_RUN_PID_CHANGE
 	select SCHED_INFO
 	select GUEST_PERF_EVENTS if PERF_EVENTS
+	select KVM_GUEST_MEMFD
 	help
 	  Support hosting virtualized guest machines.
 
@@ -71,8 +71,8 @@ config PTDUMP_STAGE2_DEBUGFS
 	depends on KVM
 	depends on DEBUG_KERNEL
 	depends on DEBUG_FS
-	depends on GENERIC_PTDUMP
-	select PTDUMP_CORE
+	depends on ARCH_HAS_PTDUMP
+	select PTDUMP
 	default n
 	help
 	  Say Y here if you want to show the stage-2 kernel pagetables
diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
index 3cf7adb2b503..3ebc0570345c 100644
--- a/arch/arm64/kvm/Makefile
+++ b/arch/arm64/kvm/Makefile
@@ -14,7 +14,7 @@ CFLAGS_sys_regs.o += -Wno-override-init
 CFLAGS_handle_exit.o += -Wno-override-init
 
 kvm-y += arm.o mmu.o mmio.o psci.o hypercalls.o pvtime.o \
-	 inject_fault.o va_layout.o handle_exit.o \
+	 inject_fault.o va_layout.o handle_exit.o config.o \
 	 guest.o debug.o reset.o sys_regs.o stacktrace.o \
 	 vgic-sys-reg-v3.o fpsimd.o pkvm.o \
 	 arch_timer.o trng.o vmid.o emulate-nested.o nested.o at.o \
@@ -23,7 +23,8 @@ kvm-y += arm.o mmu.o mmio.o psci.o hypercalls.o pvtime.o \
 	 vgic/vgic-v3.o vgic/vgic-v4.o \
 	 vgic/vgic-mmio.o vgic/vgic-mmio-v2.o \
 	 vgic/vgic-mmio-v3.o vgic/vgic-kvm-device.o \
-	 vgic/vgic-its.o vgic/vgic-debug.o
+	 vgic/vgic-its.o vgic/vgic-debug.o vgic/vgic-v3-nested.o \
+	 vgic/vgic-v5.o
 
 kvm-$(CONFIG_HW_PERF_EVENTS)  += pmu-emul.o pmu.o
 kvm-$(CONFIG_ARM64_PTR_AUTH)  += pauth.o
diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c
index 1215df590418..99a07972068d 100644
--- a/arch/arm64/kvm/arch_timer.c
+++ b/arch/arm64/kvm/arch_timer.c
@@ -30,6 +30,7 @@ static u32 host_vtimer_irq_flags;
 static u32 host_ptimer_irq_flags;
 
 static DEFINE_STATIC_KEY_FALSE(has_gic_active_state);
+DEFINE_STATIC_KEY_FALSE(broken_cntvoff_key);
 
 static const u8 default_ppi[] = {
 	[TIMER_PTIMER]  = 30,
@@ -65,7 +66,7 @@ static int nr_timers(struct kvm_vcpu *vcpu)
 
 u32 timer_get_ctl(struct arch_timer_context *ctxt)
 {
-	struct kvm_vcpu *vcpu = ctxt->vcpu;
+	struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctxt);
 
 	switch(arch_timer_ctx_index(ctxt)) {
 	case TIMER_VTIMER:
@@ -84,7 +85,7 @@ u32 timer_get_ctl(struct arch_timer_context *ctxt)
 
 u64 timer_get_cval(struct arch_timer_context *ctxt)
 {
-	struct kvm_vcpu *vcpu = ctxt->vcpu;
+	struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctxt);
 
 	switch(arch_timer_ctx_index(ctxt)) {
 	case TIMER_VTIMER:
@@ -101,37 +102,22 @@ u64 timer_get_cval(struct arch_timer_context *ctxt)
 	}
 }
 
-static u64 timer_get_offset(struct arch_timer_context *ctxt)
-{
-	u64 offset = 0;
-
-	if (!ctxt)
-		return 0;
-
-	if (ctxt->offset.vm_offset)
-		offset += *ctxt->offset.vm_offset;
-	if (ctxt->offset.vcpu_offset)
-		offset += *ctxt->offset.vcpu_offset;
-
-	return offset;
-}
-
 static void timer_set_ctl(struct arch_timer_context *ctxt, u32 ctl)
 {
-	struct kvm_vcpu *vcpu = ctxt->vcpu;
+	struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctxt);
 
 	switch(arch_timer_ctx_index(ctxt)) {
 	case TIMER_VTIMER:
-		__vcpu_sys_reg(vcpu, CNTV_CTL_EL0) = ctl;
+		__vcpu_assign_sys_reg(vcpu, CNTV_CTL_EL0, ctl);
 		break;
 	case TIMER_PTIMER:
-		__vcpu_sys_reg(vcpu, CNTP_CTL_EL0) = ctl;
+		__vcpu_assign_sys_reg(vcpu, CNTP_CTL_EL0, ctl);
 		break;
 	case TIMER_HVTIMER:
-		__vcpu_sys_reg(vcpu, CNTHV_CTL_EL2) = ctl;
+		__vcpu_assign_sys_reg(vcpu, CNTHV_CTL_EL2, ctl);
 		break;
 	case TIMER_HPTIMER:
-		__vcpu_sys_reg(vcpu, CNTHP_CTL_EL2) = ctl;
+		__vcpu_assign_sys_reg(vcpu, CNTHP_CTL_EL2, ctl);
 		break;
 	default:
 		WARN_ON(1);
@@ -140,36 +126,26 @@ static void timer_set_ctl(struct arch_timer_context *ctxt, u32 ctl)
 
 static void timer_set_cval(struct arch_timer_context *ctxt, u64 cval)
 {
-	struct kvm_vcpu *vcpu = ctxt->vcpu;
+	struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctxt);
 
 	switch(arch_timer_ctx_index(ctxt)) {
 	case TIMER_VTIMER:
-		__vcpu_sys_reg(vcpu, CNTV_CVAL_EL0) = cval;
+		__vcpu_assign_sys_reg(vcpu, CNTV_CVAL_EL0, cval);
 		break;
 	case TIMER_PTIMER:
-		__vcpu_sys_reg(vcpu, CNTP_CVAL_EL0) = cval;
+		__vcpu_assign_sys_reg(vcpu, CNTP_CVAL_EL0, cval);
 		break;
 	case TIMER_HVTIMER:
-		__vcpu_sys_reg(vcpu, CNTHV_CVAL_EL2) = cval;
+		__vcpu_assign_sys_reg(vcpu, CNTHV_CVAL_EL2, cval);
 		break;
 	case TIMER_HPTIMER:
-		__vcpu_sys_reg(vcpu, CNTHP_CVAL_EL2) = cval;
+		__vcpu_assign_sys_reg(vcpu, CNTHP_CVAL_EL2, cval);
 		break;
 	default:
 		WARN_ON(1);
 	}
 }
 
-static void timer_set_offset(struct arch_timer_context *ctxt, u64 offset)
-{
-	if (!ctxt->offset.vm_offset) {
-		WARN(offset, "timer %ld\n", arch_timer_ctx_index(ctxt));
-		return;
-	}
-
-	WRITE_ONCE(*ctxt->offset.vm_offset, offset);
-}
-
 u64 kvm_phys_timer_read(void)
 {
 	return timecounter->cc->read(timecounter->cc);
@@ -357,7 +333,7 @@ static enum hrtimer_restart kvm_hrtimer_expire(struct hrtimer *hrt)
 	u64 ns;
 
 	ctx = container_of(hrt, struct arch_timer_context, hrtimer);
-	vcpu = ctx->vcpu;
+	vcpu = timer_context_to_vcpu(ctx);
 
 	trace_kvm_timer_hrtimer_expire(ctx);
 
@@ -441,22 +417,40 @@ void kvm_timer_update_run(struct kvm_vcpu *vcpu)
 		regs->device_irq_level |= KVM_ARM_DEV_EL1_PTIMER;
 }
 
+static void kvm_timer_update_status(struct arch_timer_context *ctx, bool level)
+{
+	/*
+	 * Paper over NV2 brokenness by publishing the interrupt status
+	 * bit. This still results in a poor quality of emulation (guest
+	 * writes will have no effect until the next exit).
+	 *
+	 * But hey, it's fast, right?
+	 */
+	struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctx);
+	if (is_hyp_ctxt(vcpu) &&
+	    (ctx == vcpu_vtimer(vcpu) || ctx == vcpu_ptimer(vcpu))) {
+		unsigned long val = timer_get_ctl(ctx);
+		__assign_bit(__ffs(ARCH_TIMER_CTRL_IT_STAT), &val, level);
+		timer_set_ctl(ctx, val);
+	}
+}
+
 static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level,
 				 struct arch_timer_context *timer_ctx)
 {
-	int ret;
+	kvm_timer_update_status(timer_ctx, new_level);
 
 	timer_ctx->irq.level = new_level;
 	trace_kvm_timer_update_irq(vcpu->vcpu_id, timer_irq(timer_ctx),
 				   timer_ctx->irq.level);
 
-	if (!userspace_irqchip(vcpu->kvm)) {
-		ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu,
-					  timer_irq(timer_ctx),
-					  timer_ctx->irq.level,
-					  timer_ctx);
-		WARN_ON(ret);
-	}
+	if (userspace_irqchip(vcpu->kvm))
+		return;
+
+	kvm_vgic_inject_irq(vcpu->kvm, vcpu,
+			    timer_irq(timer_ctx),
+			    timer_ctx->irq.level,
+			    timer_ctx);
 }
 
 /* Only called for a fully emulated timer */
@@ -466,10 +460,10 @@ static void timer_emulate(struct arch_timer_context *ctx)
 
 	trace_kvm_timer_emulate(ctx, should_fire);
 
-	if (should_fire != ctx->irq.level) {
-		kvm_timer_update_irq(ctx->vcpu, should_fire, ctx);
-		return;
-	}
+	if (should_fire != ctx->irq.level)
+		kvm_timer_update_irq(timer_context_to_vcpu(ctx), should_fire, ctx);
+
+	kvm_timer_update_status(ctx, should_fire);
 
 	/*
 	 * If the timer can fire now, we don't need to have a soft timer
@@ -495,7 +489,7 @@ static void set_cntpoff(u64 cntpoff)
 
 static void timer_save_state(struct arch_timer_context *ctx)
 {
-	struct arch_timer_cpu *timer = vcpu_timer(ctx->vcpu);
+	struct arch_timer_cpu *timer = vcpu_timer(timer_context_to_vcpu(ctx));
 	enum kvm_arch_timers index = arch_timer_ctx_index(ctx);
 	unsigned long flags;
 
@@ -513,7 +507,12 @@ static void timer_save_state(struct arch_timer_context *ctx)
 	case TIMER_VTIMER:
 	case TIMER_HVTIMER:
 		timer_set_ctl(ctx, read_sysreg_el0(SYS_CNTV_CTL));
-		timer_set_cval(ctx, read_sysreg_el0(SYS_CNTV_CVAL));
+		cval = read_sysreg_el0(SYS_CNTV_CVAL);
+
+		if (has_broken_cntvoff())
+			cval -= timer_get_offset(ctx);
+
+		timer_set_cval(ctx, cval);
 
 		/* Disable the timer */
 		write_sysreg_el0(0, SYS_CNTV_CTL);
@@ -601,7 +600,7 @@ static void kvm_timer_unblocking(struct kvm_vcpu *vcpu)
 
 static void timer_restore_state(struct arch_timer_context *ctx)
 {
-	struct arch_timer_cpu *timer = vcpu_timer(ctx->vcpu);
+	struct arch_timer_cpu *timer = vcpu_timer(timer_context_to_vcpu(ctx));
 	enum kvm_arch_timers index = arch_timer_ctx_index(ctx);
 	unsigned long flags;
 
@@ -618,8 +617,15 @@ static void timer_restore_state(struct arch_timer_context *ctx)
 
 	case TIMER_VTIMER:
 	case TIMER_HVTIMER:
-		set_cntvoff(timer_get_offset(ctx));
-		write_sysreg_el0(timer_get_cval(ctx), SYS_CNTV_CVAL);
+		cval = timer_get_cval(ctx);
+		offset = timer_get_offset(ctx);
+		if (has_broken_cntvoff()) {
+			set_cntvoff(0);
+			cval += offset;
+		} else {
+			set_cntvoff(offset);
+		}
+		write_sysreg_el0(cval, SYS_CNTV_CVAL);
 		isb();
 		write_sysreg_el0(timer_get_ctl(ctx), SYS_CNTV_CTL);
 		break;
@@ -653,7 +659,7 @@ static inline void set_timer_irq_phys_active(struct arch_timer_context *ctx, boo
 
 static void kvm_timer_vcpu_load_gic(struct arch_timer_context *ctx)
 {
-	struct kvm_vcpu *vcpu = ctx->vcpu;
+	struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctx);
 	bool phys_active = false;
 
 	/*
@@ -662,7 +668,7 @@ static void kvm_timer_vcpu_load_gic(struct arch_timer_context *ctx)
 	 * this point and the register restoration, we'll take the
 	 * interrupt anyway.
 	 */
-	kvm_timer_update_irq(ctx->vcpu, kvm_timer_should_fire(ctx), ctx);
+	kvm_timer_update_irq(vcpu, kvm_timer_should_fire(ctx), ctx);
 
 	if (irqchip_in_kernel(vcpu->kvm))
 		phys_active = kvm_vgic_map_is_active(vcpu, timer_irq(ctx));
@@ -742,27 +748,12 @@ static void kvm_timer_vcpu_load_nested_switch(struct kvm_vcpu *vcpu,
 					    timer_irq(map->direct_ptimer),
 					    &arch_timer_irq_ops);
 		WARN_ON_ONCE(ret);
-
-		/*
-		 * The virtual offset behaviour is "interesting", as it
-		 * always applies when HCR_EL2.E2H==0, but only when
-		 * accessed from EL1 when HCR_EL2.E2H==1. So make sure we
-		 * track E2H when putting the HV timer in "direct" mode.
-		 */
-		if (map->direct_vtimer == vcpu_hvtimer(vcpu)) {
-			struct arch_timer_offset *offs = &map->direct_vtimer->offset;
-
-			if (vcpu_el2_e2h_is_set(vcpu))
-				offs->vcpu_offset = NULL;
-			else
-				offs->vcpu_offset = &__vcpu_sys_reg(vcpu, CNTVOFF_EL2);
-		}
 	}
 }
 
 static void timer_set_traps(struct kvm_vcpu *vcpu, struct timer_map *map)
 {
-	bool tpt, tpc;
+	bool tvt, tpt, tvc, tpc, tvt02, tpt02;
 	u64 clr, set;
 
 	/*
@@ -777,7 +768,29 @@ static void timer_set_traps(struct kvm_vcpu *vcpu, struct timer_map *map)
 	 * within this function, reality kicks in and we start adding
 	 * traps based on emulation requirements.
 	 */
-	tpt = tpc = false;
+	tvt = tpt = tvc = tpc = false;
+	tvt02 = tpt02 = false;
+
+	/*
+	 * NV2 badly breaks the timer semantics by redirecting accesses to
+	 * the EL1 timer state to memory, so let's call ECV to the rescue if
+	 * available: we trap all CNT{P,V}_{CTL,CVAL,TVAL}_EL0 accesses.
+	 *
+	 * The treatment slightly varies depending whether we run a nVHE or
+	 * VHE guest: nVHE will use the _EL0 registers directly, while VHE
+	 * will use the _EL02 accessors. This translates in different trap
+	 * bits.
+	 *
+	 * None of the trapping is required when running in non-HYP context,
+	 * unless required by the L1 hypervisor settings once we advertise
+	 * ECV+NV in the guest, or that we need trapping for other reasons.
+	 */
+	if (cpus_have_final_cap(ARM64_HAS_ECV) && is_hyp_ctxt(vcpu)) {
+		if (vcpu_el2_e2h_is_set(vcpu))
+			tvt02 = tpt02 = true;
+		else
+			tvt = tpt = true;
+	}
 
 	/*
 	 * We have two possibility to deal with a physical offset:
@@ -793,11 +806,22 @@ static void timer_set_traps(struct kvm_vcpu *vcpu, struct timer_map *map)
 		tpt = tpc = true;
 
 	/*
+	 * For the poor sods that could not correctly subtract one value
+	 * from another, trap the full virtual timer and counter.
+	 */
+	if (has_broken_cntvoff() && timer_get_offset(map->direct_vtimer))
+		tvt = tvc = true;
+
+	/*
 	 * Apply the enable bits that the guest hypervisor has requested for
 	 * its own guest. We can only add traps that wouldn't have been set
 	 * above.
+	 * Implementation choices: we do not support NV when E2H=0 in the
+	 * guest, and we don't support configuration where E2H is writable
+	 * by the guest (either FEAT_VHE or FEAT_E2H0 is implemented, but
+	 * not both). This simplifies the handling of the EL1NV* bits.
 	 */
-	if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu)) {
+	if (is_nested_ctxt(vcpu)) {
 		u64 val = __vcpu_sys_reg(vcpu, CNTHCTL_EL2);
 
 		/* Use the VHE format for mental sanity */
@@ -806,6 +830,9 @@ static void timer_set_traps(struct kvm_vcpu *vcpu, struct timer_map *map)
 
 		tpt |= !(val & (CNTHCTL_EL1PCEN << 10));
 		tpc |= !(val & (CNTHCTL_EL1PCTEN << 10));
+
+		tpt02 |= (val & CNTHCTL_EL1NVPCT);
+		tvt02 |= (val & CNTHCTL_EL1NVVCT);
 	}
 
 	/*
@@ -817,6 +844,10 @@ static void timer_set_traps(struct kvm_vcpu *vcpu, struct timer_map *map)
 
 	assign_clear_set_bit(tpt, CNTHCTL_EL1PCEN << 10, set, clr);
 	assign_clear_set_bit(tpc, CNTHCTL_EL1PCTEN << 10, set, clr);
+	assign_clear_set_bit(tvt, CNTHCTL_EL1TVT, clr, set);
+	assign_clear_set_bit(tvc, CNTHCTL_EL1TVCT, clr, set);
+	assign_clear_set_bit(tvt02, CNTHCTL_EL1NVVCT, clr, set);
+	assign_clear_set_bit(tpt02, CNTHCTL_EL1NVPCT, clr, set);
 
 	/* This only happens on VHE, so use the CNTHCTL_EL2 accessor. */
 	sysreg_clear_set(cnthctl_el2, clr, set);
@@ -905,6 +936,44 @@ void kvm_timer_vcpu_put(struct kvm_vcpu *vcpu)
 		kvm_timer_blocking(vcpu);
 }
 
+void kvm_timer_sync_nested(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * When NV2 is on, guest hypervisors have their EL1 timer register
+	 * accesses redirected to the VNCR page. Any guest action taken on
+	 * the timer is postponed until the next exit, leading to a very
+	 * poor quality of emulation.
+	 *
+	 * This is an unmitigated disaster, only papered over by FEAT_ECV,
+	 * which allows trapping of the timer registers even with NV2.
+	 * Still, this is still worse than FEAT_NV on its own. Meh.
+	 */
+	if (!cpus_have_final_cap(ARM64_HAS_ECV)) {
+		/*
+		 * For a VHE guest hypervisor, the EL2 state is directly
+		 * stored in the host EL1 timers, while the emulated EL1
+		 * state is stored in the VNCR page. The latter could have
+		 * been updated behind our back, and we must reset the
+		 * emulation of the timers.
+		 *
+		 * A non-VHE guest hypervisor doesn't have any direct access
+		 * to its timers: the EL2 registers trap despite being
+		 * notionally direct (we use the EL1 HW, as for VHE), while
+		 * the EL1 registers access memory.
+		 *
+		 * In both cases, process the emulated timers on each guest
+		 * exit. Boo.
+		 */
+		struct timer_map map;
+		get_timer_map(vcpu, &map);
+
+		soft_timer_cancel(&map.emul_vtimer->hrtimer);
+		soft_timer_cancel(&map.emul_ptimer->hrtimer);
+		timer_emulate(map.emul_vtimer);
+		timer_emulate(map.emul_ptimer);
+	}
+}
+
 /*
  * With a userspace irqchip we have to check if the guest de-asserted the
  * timer and if so, unmask the timer irq signal on the host interrupt
@@ -958,7 +1027,7 @@ void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu)
 	if (vcpu_has_nv(vcpu)) {
 		struct arch_timer_offset *offs = &vcpu_vtimer(vcpu)->offset;
 
-		offs->vcpu_offset = &__vcpu_sys_reg(vcpu, CNTVOFF_EL2);
+		offs->vcpu_offset = __ctxt_sys_reg(&vcpu->arch.ctxt, CNTVOFF_EL2);
 		offs->vm_offset = &vcpu->kvm->arch.timer_data.poffset;
 	}
 
@@ -985,15 +1054,14 @@ static void timer_context_init(struct kvm_vcpu *vcpu, int timerid)
 	struct arch_timer_context *ctxt = vcpu_get_timer(vcpu, timerid);
 	struct kvm *kvm = vcpu->kvm;
 
-	ctxt->vcpu = vcpu;
+	ctxt->timer_id = timerid;
 
 	if (timerid == TIMER_VTIMER)
 		ctxt->offset.vm_offset = &kvm->arch.timer_data.voffset;
 	else
 		ctxt->offset.vm_offset = &kvm->arch.timer_data.poffset;
 
-	hrtimer_init(&ctxt->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS_HARD);
-	ctxt->hrtimer.function = kvm_hrtimer_expire;
+	hrtimer_setup(&ctxt->hrtimer, kvm_hrtimer_expire, CLOCK_MONOTONIC, HRTIMER_MODE_ABS_HARD);
 
 	switch (timerid) {
 	case TIMER_PTIMER:
@@ -1020,8 +1088,8 @@ void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu)
 		timer_set_offset(vcpu_ptimer(vcpu), 0);
 	}
 
-	hrtimer_init(&timer->bg_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS_HARD);
-	timer->bg_timer.function = kvm_bg_timer_expire;
+	hrtimer_setup(&timer->bg_timer, kvm_bg_timer_expire, CLOCK_MONOTONIC,
+		      HRTIMER_MODE_ABS_HARD);
 }
 
 void kvm_timer_init_vm(struct kvm *kvm)
@@ -1044,49 +1112,6 @@ void kvm_timer_cpu_down(void)
 		disable_percpu_irq(host_ptimer_irq);
 }
 
-int kvm_arm_timer_set_reg(struct kvm_vcpu *vcpu, u64 regid, u64 value)
-{
-	struct arch_timer_context *timer;
-
-	switch (regid) {
-	case KVM_REG_ARM_TIMER_CTL:
-		timer = vcpu_vtimer(vcpu);
-		kvm_arm_timer_write(vcpu, timer, TIMER_REG_CTL, value);
-		break;
-	case KVM_REG_ARM_TIMER_CNT:
-		if (!test_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET,
-			      &vcpu->kvm->arch.flags)) {
-			timer = vcpu_vtimer(vcpu);
-			timer_set_offset(timer, kvm_phys_timer_read() - value);
-		}
-		break;
-	case KVM_REG_ARM_TIMER_CVAL:
-		timer = vcpu_vtimer(vcpu);
-		kvm_arm_timer_write(vcpu, timer, TIMER_REG_CVAL, value);
-		break;
-	case KVM_REG_ARM_PTIMER_CTL:
-		timer = vcpu_ptimer(vcpu);
-		kvm_arm_timer_write(vcpu, timer, TIMER_REG_CTL, value);
-		break;
-	case KVM_REG_ARM_PTIMER_CNT:
-		if (!test_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET,
-			      &vcpu->kvm->arch.flags)) {
-			timer = vcpu_ptimer(vcpu);
-			timer_set_offset(timer, kvm_phys_timer_read() - value);
-		}
-		break;
-	case KVM_REG_ARM_PTIMER_CVAL:
-		timer = vcpu_ptimer(vcpu);
-		kvm_arm_timer_write(vcpu, timer, TIMER_REG_CVAL, value);
-		break;
-
-	default:
-		return -1;
-	}
-
-	return 0;
-}
-
 static u64 read_timer_ctl(struct arch_timer_context *timer)
 {
 	/*
@@ -1103,31 +1128,6 @@ static u64 read_timer_ctl(struct arch_timer_context *timer)
 	return ctl;
 }
 
-u64 kvm_arm_timer_get_reg(struct kvm_vcpu *vcpu, u64 regid)
-{
-	switch (regid) {
-	case KVM_REG_ARM_TIMER_CTL:
-		return kvm_arm_timer_read(vcpu,
-					  vcpu_vtimer(vcpu), TIMER_REG_CTL);
-	case KVM_REG_ARM_TIMER_CNT:
-		return kvm_arm_timer_read(vcpu,
-					  vcpu_vtimer(vcpu), TIMER_REG_CNT);
-	case KVM_REG_ARM_TIMER_CVAL:
-		return kvm_arm_timer_read(vcpu,
-					  vcpu_vtimer(vcpu), TIMER_REG_CVAL);
-	case KVM_REG_ARM_PTIMER_CTL:
-		return kvm_arm_timer_read(vcpu,
-					  vcpu_ptimer(vcpu), TIMER_REG_CTL);
-	case KVM_REG_ARM_PTIMER_CNT:
-		return kvm_arm_timer_read(vcpu,
-					  vcpu_ptimer(vcpu), TIMER_REG_CNT);
-	case KVM_REG_ARM_PTIMER_CVAL:
-		return kvm_arm_timer_read(vcpu,
-					  vcpu_ptimer(vcpu), TIMER_REG_CVAL);
-	}
-	return (u64)-1;
-}
-
 static u64 kvm_arm_timer_read(struct kvm_vcpu *vcpu,
 			      struct arch_timer_context *timer,
 			      enum kvm_arch_timer_regs treg)
@@ -1363,6 +1363,37 @@ static int kvm_irq_init(struct arch_timer_kvm_info *info)
 	return 0;
 }
 
+static void kvm_timer_handle_errata(void)
+{
+	u64 mmfr0, mmfr1, mmfr4;
+
+	/*
+	 * CNTVOFF_EL2 is broken on some implementations. For those, we trap
+	 * all virtual timer/counter accesses, requiring FEAT_ECV.
+	 *
+	 * However, a hypervisor supporting nesting is likely to mitigate the
+	 * erratum at L0, and not require other levels to mitigate it (which
+	 * would otherwise be a terrible performance sink due to trap
+	 * amplification).
+	 *
+	 * Given that the affected HW implements both FEAT_VHE and FEAT_E2H0,
+	 * and that NV is likely not to (because of limitations of the
+	 * architecture), only enable the workaround when FEAT_VHE and
+	 * FEAT_E2H0 are both detected. Time will tell if this actually holds.
+	 */
+	mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+	mmfr4 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR4_EL1);
+	if (SYS_FIELD_GET(ID_AA64MMFR1_EL1, VH, mmfr1)		&&
+	    !SYS_FIELD_GET(ID_AA64MMFR4_EL1, E2H0, mmfr4)	&&
+	    SYS_FIELD_GET(ID_AA64MMFR0_EL1, ECV, mmfr0)		&&
+	    (has_vhe() || has_hvhe())				&&
+	    cpus_have_final_cap(ARM64_WORKAROUND_QCOM_ORYON_CNTVOFF)) {
+		static_branch_enable(&broken_cntvoff_key);
+		kvm_info("Broken CNTVOFF_EL2, trapping virtual timer\n");
+	}
+}
+
 int __init kvm_timer_hyp_init(bool has_gic)
 {
 	struct arch_timer_kvm_info *info;
@@ -1431,6 +1462,7 @@ int __init kvm_timer_hyp_init(bool has_gic)
 		goto out_free_vtimer_irq;
 	}
 
+	kvm_timer_handle_errata();
 	return 0;
 
 out_free_ptimer_irq:
@@ -1657,7 +1689,7 @@ int kvm_vm_ioctl_set_counter_offset(struct kvm *kvm,
 
 	mutex_lock(&kvm->lock);
 
-	if (lock_all_vcpus(kvm)) {
+	if (!kvm_trylock_all_vcpus(kvm)) {
 		set_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET, &kvm->arch.flags);
 
 		/*
@@ -1669,7 +1701,7 @@ int kvm_vm_ioctl_set_counter_offset(struct kvm *kvm,
 		kvm->arch.timer_data.voffset = offset->counter_offset;
 		kvm->arch.timer_data.poffset = offset->counter_offset;
 
-		unlock_all_vcpus(kvm);
+		kvm_unlock_all_vcpus(kvm);
 	} else {
 		ret = -EBUSY;
 	}
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index a102c3aebdbc..4f80da0c0d1d 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -6,7 +6,6 @@
 
 #include <linux/bug.h>
 #include <linux/cpu_pm.h>
-#include <linux/entry-kvm.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/kvm_host.h>
@@ -61,7 +60,7 @@ static enum kvm_wfx_trap_policy kvm_wfe_trap_policy __read_mostly = KVM_WFX_NOTR
 
 DECLARE_KVM_HYP_PER_CPU(unsigned long, kvm_hyp_vector);
 
-DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
+DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_base);
 DECLARE_KVM_NVHE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
 
 DECLARE_KVM_NVHE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt);
@@ -80,31 +79,6 @@ int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_exiting_guest_mode(vcpu) == IN_GUEST_MODE;
 }
 
-/*
- * This functions as an allow-list of protected VM capabilities.
- * Features not explicitly allowed by this function are denied.
- */
-static bool pkvm_ext_allowed(struct kvm *kvm, long ext)
-{
-	switch (ext) {
-	case KVM_CAP_IRQCHIP:
-	case KVM_CAP_ARM_PSCI:
-	case KVM_CAP_ARM_PSCI_0_2:
-	case KVM_CAP_NR_VCPUS:
-	case KVM_CAP_MAX_VCPUS:
-	case KVM_CAP_MAX_VCPU_ID:
-	case KVM_CAP_MSI_DEVID:
-	case KVM_CAP_ARM_VM_IPA_SIZE:
-	case KVM_CAP_ARM_PMU_V3:
-	case KVM_CAP_ARM_SVE:
-	case KVM_CAP_ARM_PTRAUTH_ADDRESS:
-	case KVM_CAP_ARM_PTRAUTH_GENERIC:
-		return true;
-	default:
-		return false;
-	}
-}
-
 int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
 			    struct kvm_enable_cap *cap)
 {
@@ -113,7 +87,7 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
 	if (cap->flags)
 		return -EINVAL;
 
-	if (kvm_vm_is_protected(kvm) && !pkvm_ext_allowed(kvm, cap->cap))
+	if (kvm_vm_is_protected(kvm) && !kvm_pvm_ext_allowed(cap->cap))
 		return -EINVAL;
 
 	switch (cap->cap) {
@@ -150,6 +124,18 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
 		}
 		mutex_unlock(&kvm->slots_lock);
 		break;
+	case KVM_CAP_ARM_WRITABLE_IMP_ID_REGS:
+		mutex_lock(&kvm->lock);
+		if (!kvm->created_vcpus) {
+			r = 0;
+			set_bit(KVM_ARCH_FLAG_WRITABLE_IMP_ID_REGS, &kvm->arch.flags);
+		}
+		mutex_unlock(&kvm->lock);
+		break;
+	case KVM_CAP_ARM_SEA_TO_USER:
+		r = 0;
+		set_bit(KVM_ARCH_FLAG_EXIT_SEA, &kvm->arch.flags);
+		break;
 	default:
 		break;
 	}
@@ -187,10 +173,6 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	if (ret)
 		return ret;
 
-	ret = pkvm_init_host_vm(kvm);
-	if (ret)
-		goto err_unshare_kvm;
-
 	if (!zalloc_cpumask_var(&kvm->arch.supported_cpus, GFP_KERNEL_ACCOUNT)) {
 		ret = -ENOMEM;
 		goto err_unshare_kvm;
@@ -201,6 +183,16 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	if (ret)
 		goto err_free_cpumask;
 
+	if (is_protected_kvm_enabled()) {
+		/*
+		 * If any failures occur after this is successful, make sure to
+		 * call __pkvm_unreserve_vm to unreserve the VM in hyp.
+		 */
+		ret = pkvm_init_host_vm(kvm);
+		if (ret)
+			goto err_free_cpumask;
+	}
+
 	kvm_vgic_early_init(kvm);
 
 	kvm_timer_init_vm(kvm);
@@ -311,7 +303,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 {
 	int r;
 
-	if (kvm && kvm_vm_is_protected(kvm) && !pkvm_ext_allowed(kvm, ext))
+	if (kvm && kvm_vm_is_protected(kvm) && !kvm_pvm_ext_allowed(ext))
 		return 0;
 
 	switch (ext) {
@@ -338,6 +330,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_ARM_SYSTEM_SUSPEND:
 	case KVM_CAP_IRQFD_RESAMPLE:
 	case KVM_CAP_COUNTER_OFFSET:
+	case KVM_CAP_ARM_WRITABLE_IMP_ID_REGS:
+	case KVM_CAP_ARM_SEA_TO_USER:
 		r = 1;
 		break;
 	case KVM_CAP_SET_GUEST_DEBUG2:
@@ -384,6 +378,12 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_ARM_EL1_32BIT:
 		r = cpus_have_final_cap(ARM64_HAS_32BIT_EL1);
 		break;
+	case KVM_CAP_ARM_EL2:
+		r = cpus_have_final_cap(ARM64_HAS_NESTED_VIRT);
+		break;
+	case KVM_CAP_ARM_EL2_E2H0:
+		r = cpus_have_final_cap(ARM64_HAS_HCR_NV1);
+		break;
 	case KVM_CAP_GUEST_DEBUG_HW_BPS:
 		r = get_num_brps();
 		break;
@@ -391,7 +391,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = get_num_wrps();
 		break;
 	case KVM_CAP_ARM_PMU_V3:
-		r = kvm_arm_support_pmu_v3();
+		r = kvm_supports_guest_pmuv3();
 		break;
 	case KVM_CAP_ARM_INJECT_SERROR_ESR:
 		r = cpus_have_final_cap(ARM64_HAS_RAS_EXTN);
@@ -418,6 +418,13 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_ARM_SUPPORTED_REG_MASK_RANGES:
 		r = BIT(0);
 		break;
+	case KVM_CAP_ARM_CACHEABLE_PFNMAP_SUPPORTED:
+		if (!kvm)
+			r = -EINVAL;
+		else
+			r = kvm_supports_cacheable_pfnmap();
+		break;
+
 	default:
 		r = 0;
 	}
@@ -438,7 +445,7 @@ struct kvm *kvm_arch_alloc_vm(void)
 	if (!has_vhe())
 		return kzalloc(sz, GFP_KERNEL_ACCOUNT);
 
-	return __vmalloc(sz, GFP_KERNEL_ACCOUNT | __GFP_HIGHMEM | __GFP_ZERO);
+	return kvzalloc(sz, GFP_KERNEL_ACCOUNT);
 }
 
 int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
@@ -476,8 +483,6 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 
 	kvm_pmu_vcpu_init(vcpu);
 
-	kvm_arm_reset_debug_ptr(vcpu);
-
 	kvm_arm_pvtime_vcpu_init(&vcpu->arch);
 
 	vcpu->arch.hw_mmu = &vcpu->kvm->arch.mmu;
@@ -493,7 +498,11 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 	if (err)
 		return err;
 
-	return kvm_share_hyp(vcpu, vcpu + 1);
+	err = kvm_share_hyp(vcpu, vcpu + 1);
+	if (err)
+		kvm_vgic_vcpu_destroy(vcpu);
+
+	return err;
 }
 
 void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
@@ -502,7 +511,10 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
 
 void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
-	kvm_mmu_free_memory_cache(&vcpu->arch.mmu_page_cache);
+	if (!is_protected_kvm_enabled())
+		kvm_mmu_free_memory_cache(&vcpu->arch.mmu_page_cache);
+	else
+		free_hyp_memcache(&vcpu->arch.pkvm_memcache);
 	kvm_timer_vcpu_terminate(vcpu);
 	kvm_pmu_vcpu_destroy(vcpu);
 	kvm_vgic_vcpu_destroy(vcpu);
@@ -526,7 +538,7 @@ static void vcpu_set_pauth_traps(struct kvm_vcpu *vcpu)
 		 * Either we're running an L2 guest, and the API/APK bits come
 		 * from L1's HCR_EL2, or API/APK are both set.
 		 */
-		if (unlikely(vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu))) {
+		if (unlikely(is_nested_ctxt(vcpu))) {
 			u64 val;
 
 			val = __vcpu_sys_reg(vcpu, HCR_EL2);
@@ -574,6 +586,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	struct kvm_s2_mmu *mmu;
 	int *last_ran;
 
+	if (is_protected_kvm_enabled())
+		goto nommu;
+
 	if (vcpu_has_nv(vcpu))
 		kvm_vcpu_load_hw_mmu(vcpu);
 
@@ -581,6 +596,16 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	last_ran = this_cpu_ptr(mmu->last_vcpu_ran);
 
 	/*
+	 * Ensure a VMID is allocated for the MMU before programming VTTBR_EL2,
+	 * which happens eagerly in VHE.
+	 *
+	 * Also, the VMID allocator only preserves VMIDs that are active at the
+	 * time of rollover, so KVM might need to grab a new VMID for the MMU if
+	 * this is called from kvm_sched_in().
+	 */
+	kvm_arm_vmid_update(&mmu->vmid);
+
+	/*
 	 * We guarantee that both TLBs and I-cache are private to each
 	 * vcpu. If detecting that a vcpu from the same VM has
 	 * previously run on the same physical CPU, call into the
@@ -594,10 +619,17 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		*last_ran = vcpu->vcpu_idx;
 	}
 
+nommu:
 	vcpu->cpu = cpu;
 
-	kvm_vgic_load(vcpu);
+	/*
+	 * The timer must be loaded before the vgic to correctly set up physical
+	 * interrupt deactivation in nested state (e.g. timer interrupt).
+	 */
 	kvm_timer_vcpu_load(vcpu);
+	kvm_vgic_load(vcpu);
+	kvm_vcpu_load_debug(vcpu);
+	kvm_vcpu_load_fgt(vcpu);
 	if (has_vhe())
 		kvm_vcpu_load_vhe(vcpu);
 	kvm_arch_vcpu_load_fp(vcpu);
@@ -617,7 +649,13 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 	vcpu_set_pauth_traps(vcpu);
 
-	kvm_arch_vcpu_load_debug_state_flags(vcpu);
+	if (is_protected_kvm_enabled()) {
+		kvm_call_hyp_nvhe(__pkvm_vcpu_load,
+				  vcpu->kvm->arch.pkvm.handle,
+				  vcpu->vcpu_idx, vcpu->arch.hcr_el2);
+		kvm_call_hyp(__vgic_v3_restore_vmcr_aprs,
+			     &vcpu->arch.vgic_cpu.vgic_v3);
+	}
 
 	if (!cpumask_test_cpu(cpu, vcpu->kvm->arch.supported_cpus))
 		vcpu_set_on_unsupported_cpu(vcpu);
@@ -625,7 +663,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
-	kvm_arch_vcpu_put_debug_state_flags(vcpu);
+	if (is_protected_kvm_enabled()) {
+		kvm_call_hyp(__vgic_v3_save_aprs, &vcpu->arch.vgic_cpu.vgic_v3);
+		kvm_call_hyp_nvhe(__pkvm_vcpu_put);
+	}
+
+	kvm_vcpu_put_debug(vcpu);
 	kvm_arch_vcpu_put_fp(vcpu);
 	if (has_vhe())
 		kvm_vcpu_put_vhe(vcpu);
@@ -714,7 +757,8 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
  */
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
 {
-	bool irq_lines = *vcpu_hcr(v) & (HCR_VI | HCR_VF);
+	bool irq_lines = *vcpu_hcr(v) & (HCR_VI | HCR_VF | HCR_VSE);
+
 	return ((irq_lines || kvm_vgic_vcpu_pending_irq(v))
 		&& !kvm_arm_vcpu_stopped(v) && !v->arch.pause);
 }
@@ -799,17 +843,11 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 	if (!kvm_arm_vcpu_is_finalized(vcpu))
 		return -EPERM;
 
-	ret = kvm_arch_vcpu_run_map_fp(vcpu);
-	if (ret)
-		return ret;
-
 	if (likely(vcpu_has_run_once(vcpu)))
 		return 0;
 
 	kvm_init_mpidr_data(kvm);
 
-	kvm_arm_vcpu_init_debug(vcpu);
-
 	if (likely(irqchip_in_kernel(kvm))) {
 		/*
 		 * Map the VGIC hardware resources before running a vcpu the
@@ -824,6 +862,16 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 	if (ret)
 		return ret;
 
+	if (vcpu_has_nv(vcpu)) {
+		ret = kvm_vcpu_allocate_vncr_tlb(vcpu);
+		if (ret)
+			return ret;
+
+		ret = kvm_vgic_vcpu_nv_init(vcpu);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * This needs to happen after any restriction has been applied
 	 * to the feature set.
@@ -834,14 +882,20 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 	if (ret)
 		return ret;
 
-	ret = kvm_arm_pmu_v3_enable(vcpu);
-	if (ret)
-		return ret;
+	if (kvm_vcpu_has_pmu(vcpu)) {
+		ret = kvm_arm_pmu_v3_enable(vcpu);
+		if (ret)
+			return ret;
+	}
 
 	if (is_protected_kvm_enabled()) {
 		ret = pkvm_create_hyp_vm(kvm);
 		if (ret)
 			return ret;
+
+		ret = pkvm_create_hyp_vcpu(vcpu);
+		if (ret)
+			return ret;
 	}
 
 	mutex_lock(&kvm->arch.config_lock);
@@ -992,6 +1046,10 @@ static int check_vcpu_requests(struct kvm_vcpu *vcpu)
 		 */
 		kvm_check_request(KVM_REQ_IRQ_PENDING, vcpu);
 
+		/* Process interrupts deactivated through a trap */
+		if (kvm_check_request(KVM_REQ_VGIC_PROCESS_UPDATE, vcpu))
+			kvm_vgic_process_async_update(vcpu);
+
 		if (kvm_check_request(KVM_REQ_RECORD_STEAL, vcpu))
 			kvm_update_stolen_time(vcpu);
 
@@ -1133,7 +1191,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		/*
 		 * Check conditions before entering the guest
 		 */
-		ret = xfer_to_guest_mode_handle_work(vcpu);
+		ret = kvm_xfer_to_guest_mode_handle_work(vcpu);
 		if (!ret)
 			ret = 1;
 
@@ -1147,19 +1205,10 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		 */
 		preempt_disable();
 
-		/*
-		 * The VMID allocator only tracks active VMIDs per
-		 * physical CPU, and therefore the VMID allocated may not be
-		 * preserved on VMID roll-over if the task was preempted,
-		 * making a thread's VMID inactive. So we need to call
-		 * kvm_arm_vmid_update() in non-premptible context.
-		 */
-		if (kvm_arm_vmid_update(&vcpu->arch.hw_mmu->vmid) &&
-		    has_vhe())
-			__load_stage2(vcpu->arch.hw_mmu,
-				      vcpu->arch.hw_mmu->arch);
+		kvm_nested_flush_hwstate(vcpu);
 
-		kvm_pmu_flush_hwstate(vcpu);
+		if (kvm_vcpu_has_pmu(vcpu))
+			kvm_pmu_flush_hwstate(vcpu);
 
 		local_irq_disable();
 
@@ -1178,7 +1227,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		if (ret <= 0 || kvm_vcpu_exit_request(vcpu, &ret)) {
 			vcpu->mode = OUTSIDE_GUEST_MODE;
 			isb(); /* Ensure work in x_flush_hwstate is committed */
-			kvm_pmu_sync_hwstate(vcpu);
+			if (kvm_vcpu_has_pmu(vcpu))
+				kvm_pmu_sync_hwstate(vcpu);
 			if (unlikely(!irqchip_in_kernel(vcpu->kvm)))
 				kvm_timer_sync_user(vcpu);
 			kvm_vgic_sync_hwstate(vcpu);
@@ -1187,7 +1237,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 			continue;
 		}
 
-		kvm_arm_setup_debug(vcpu);
 		kvm_arch_vcpu_ctxflush_fp(vcpu);
 
 		/**************************************************************
@@ -1204,14 +1253,13 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		 * Back from guest
 		 *************************************************************/
 
-		kvm_arm_clear_debug(vcpu);
-
 		/*
 		 * We must sync the PMU state before the vgic state so
 		 * that the vgic can properly sample the updated state of the
 		 * interrupt line.
 		 */
-		kvm_pmu_sync_hwstate(vcpu);
+		if (kvm_vcpu_has_pmu(vcpu))
+			kvm_pmu_sync_hwstate(vcpu);
 
 		/*
 		 * Sync the vgic state before syncing the timer state because
@@ -1228,6 +1276,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		if (unlikely(!irqchip_in_kernel(vcpu->kvm)))
 			kvm_timer_sync_user(vcpu);
 
+		if (is_hyp_ctxt(vcpu))
+			kvm_timer_sync_nested(vcpu);
+
 		kvm_arch_vcpu_ctxsync_fp(vcpu);
 
 		/*
@@ -1255,6 +1306,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		/* Exit types that need handling before we can be preempted */
 		handle_exit_early(vcpu, ret);
 
+		kvm_nested_sync_hwstate(vcpu);
+
 		preempt_enable();
 
 		/*
@@ -1397,7 +1450,7 @@ static unsigned long system_supported_vcpu_features(void)
 	if (!cpus_have_final_cap(ARM64_HAS_32BIT_EL1))
 		clear_bit(KVM_ARM_VCPU_EL1_32BIT, &features);
 
-	if (!kvm_arm_support_pmu_v3())
+	if (!kvm_supports_guest_pmuv3())
 		clear_bit(KVM_ARM_VCPU_PMU_V3, &features);
 
 	if (!system_supports_sve())
@@ -1571,7 +1624,6 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
 	}
 
 	vcpu_reset_hcr(vcpu);
-	vcpu->arch.cptr_el2 = kvm_get_reset_cptr_el2(vcpu);
 
 	/*
 	 * Handle the "start in power-off" case.
@@ -1751,6 +1803,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	case KVM_GET_VCPU_EVENTS: {
 		struct kvm_vcpu_events events;
 
+		if (!kvm_vcpu_initialized(vcpu))
+			return -ENOEXEC;
+
 		if (kvm_arm_vcpu_get_events(vcpu, &events))
 			return -EINVAL;
 
@@ -1762,6 +1817,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	case KVM_SET_VCPU_EVENTS: {
 		struct kvm_vcpu_events events;
 
+		if (!kvm_vcpu_initialized(vcpu))
+			return -ENOEXEC;
+
 		if (copy_from_user(&events, argp, sizeof(events)))
 			return -EFAULT;
 
@@ -1785,6 +1843,12 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	return r;
 }
 
+long kvm_arch_vcpu_unlocked_ioctl(struct file *filp, unsigned int ioctl,
+				  unsigned long arg)
+{
+	return -ENOIOCTLCMD;
+}
+
 void kvm_arch_sync_dirty_log(struct kvm *kvm, struct kvm_memory_slot *memslot)
 {
 
@@ -1894,49 +1958,6 @@ int kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
 	}
 }
 
-/* unlocks vcpus from @vcpu_lock_idx and smaller */
-static void unlock_vcpus(struct kvm *kvm, int vcpu_lock_idx)
-{
-	struct kvm_vcpu *tmp_vcpu;
-
-	for (; vcpu_lock_idx >= 0; vcpu_lock_idx--) {
-		tmp_vcpu = kvm_get_vcpu(kvm, vcpu_lock_idx);
-		mutex_unlock(&tmp_vcpu->mutex);
-	}
-}
-
-void unlock_all_vcpus(struct kvm *kvm)
-{
-	lockdep_assert_held(&kvm->lock);
-
-	unlock_vcpus(kvm, atomic_read(&kvm->online_vcpus) - 1);
-}
-
-/* Returns true if all vcpus were locked, false otherwise */
-bool lock_all_vcpus(struct kvm *kvm)
-{
-	struct kvm_vcpu *tmp_vcpu;
-	unsigned long c;
-
-	lockdep_assert_held(&kvm->lock);
-
-	/*
-	 * Any time a vcpu is in an ioctl (including running), the
-	 * core KVM code tries to grab the vcpu->mutex.
-	 *
-	 * By grabbing the vcpu->mutex of all VCPUs we ensure that no
-	 * other VCPUs can fiddle with the state while we access it.
-	 */
-	kvm_for_each_vcpu(c, tmp_vcpu, kvm) {
-		if (!mutex_trylock(&tmp_vcpu->mutex)) {
-			unlock_vcpus(kvm, c - 1);
-			return false;
-		}
-	}
-
-	return true;
-}
-
 static unsigned long nvhe_percpu_size(void)
 {
 	return (unsigned long)CHOOSE_NVHE_SYM(__per_cpu_end) -
@@ -1990,7 +2011,6 @@ static int kvm_init_vector_slots(void)
 static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits)
 {
 	struct kvm_nvhe_init_params *params = per_cpu_ptr_nvhe_sym(kvm_init_params, cpu);
-	u64 mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
 	unsigned long tcr;
 
 	/*
@@ -2006,17 +2026,17 @@ static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits)
 
 	tcr = read_sysreg(tcr_el1);
 	if (cpus_have_final_cap(ARM64_KVM_HVHE)) {
+		tcr &= ~(TCR_HD | TCR_HA | TCR_A1 | TCR_T0SZ_MASK);
 		tcr |= TCR_EPD1_MASK;
 	} else {
+		unsigned long ips = FIELD_GET(TCR_IPS_MASK, tcr);
+
 		tcr &= TCR_EL2_MASK;
-		tcr |= TCR_EL2_RES1;
+		tcr |= TCR_EL2_RES1 | FIELD_PREP(TCR_EL2_PS_MASK, ips);
+		if (lpa2_is_enabled())
+			tcr |= TCR_EL2_DS;
 	}
-	tcr &= ~TCR_T0SZ_MASK;
 	tcr |= TCR_T0SZ(hyp_va_bits);
-	tcr &= ~TCR_EL2_PS_MASK;
-	tcr |= FIELD_PREP(TCR_EL2_PS_MASK, kvm_get_parange(mmfr0));
-	if (kvm_lpa2_is_enabled())
-		tcr |= TCR_EL2_DS;
 	params->tcr_el2 = tcr;
 
 	params->pgd_pa = kvm_mmu_get_httbr();
@@ -2109,6 +2129,7 @@ static void cpu_set_hyp_vector(void)
 static void cpu_hyp_init_context(void)
 {
 	kvm_init_host_cpu_context(host_data_ptr(host_ctxt));
+	kvm_init_host_debug_data();
 
 	if (!is_kernel_in_hyp_mode())
 		cpu_init_hyp_mode();
@@ -2117,10 +2138,11 @@ static void cpu_hyp_init_context(void)
 static void cpu_hyp_init_features(void)
 {
 	cpu_set_hyp_vector();
-	kvm_arm_init_debug();
 
-	if (is_kernel_in_hyp_mode())
+	if (is_kernel_in_hyp_mode()) {
 		kvm_timer_init_vhe();
+		kvm_debug_init_vhe();
+	}
 
 	if (vgic_present)
 		kvm_vgic_init_cpu_hardware();
@@ -2143,7 +2165,7 @@ static void cpu_hyp_init(void *discard)
 
 static void cpu_hyp_uninit(void *discard)
 {
-	if (__this_cpu_read(kvm_hyp_initialized)) {
+	if (!is_protected_kvm_enabled() && __this_cpu_read(kvm_hyp_initialized)) {
 		cpu_hyp_reset();
 		__this_cpu_write(kvm_hyp_initialized, 0);
 	}
@@ -2300,6 +2322,19 @@ static int __init init_subsystems(void)
 		break;
 	case -ENODEV:
 	case -ENXIO:
+		/*
+		 * No VGIC? No pKVM for you.
+		 *
+		 * Protected mode assumes that VGICv3 is present, so no point
+		 * in trying to hobble along if vgic initialization fails.
+		 */
+		if (is_protected_kvm_enabled())
+			goto out;
+
+		/*
+		 * Otherwise, userspace could choose to implement a GIC for its
+		 * guest on non-cooperative hardware.
+		 */
 		vgic_present = false;
 		err = 0;
 		break;
@@ -2307,6 +2342,14 @@ static int __init init_subsystems(void)
 		goto out;
 	}
 
+	if (kvm_mode == KVM_MODE_NV &&
+		!(vgic_present && (kvm_vgic_global_state.type == VGIC_V3 ||
+				   kvm_vgic_global_state.has_gcie_v3_compat))) {
+		kvm_err("NV support requires GICv3 or GICv5 with legacy support, giving up\n");
+		err = -EINVAL;
+		goto out;
+	}
+
 	/*
 	 * Init HYP architected timer support
 	 */
@@ -2339,8 +2382,13 @@ static void __init teardown_hyp_mode(void)
 
 	free_hyp_pgds();
 	for_each_possible_cpu(cpu) {
-		free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
-		free_pages(kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[cpu], nvhe_percpu_order());
+		if (per_cpu(kvm_hyp_initialized, cpu))
+			continue;
+
+		free_pages(per_cpu(kvm_arm_hyp_stack_base, cpu), NVHE_STACK_SHIFT - PAGE_SHIFT);
+
+		if (!kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[cpu])
+			continue;
 
 		if (free_sve) {
 			struct cpu_sve_state *sve_state;
@@ -2348,6 +2396,9 @@ static void __init teardown_hyp_mode(void)
 			sve_state = per_cpu_ptr_nvhe_sym(kvm_host_data, cpu)->sve_state;
 			free_pages((unsigned long) sve_state, pkvm_host_sve_state_order());
 		}
+
+		free_pages(kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[cpu], nvhe_percpu_order());
+
 	}
 }
 
@@ -2386,12 +2437,12 @@ static u64 get_hyp_id_aa64pfr0_el1(void)
 	 */
 	u64 val = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
 
-	val &= ~(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) |
-		 ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3));
+	val &= ~(ID_AA64PFR0_EL1_CSV2 |
+		 ID_AA64PFR0_EL1_CSV3);
 
-	val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2),
+	val |= FIELD_PREP(ID_AA64PFR0_EL1_CSV2,
 			  arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED);
-	val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3),
+	val |= FIELD_PREP(ID_AA64PFR0_EL1_CSV3,
 			  arm64_get_meltdown_state() == SPECTRE_UNAFFECTED);
 
 	return val;
@@ -2410,6 +2461,26 @@ static void kvm_hyp_init_symbols(void)
 	kvm_nvhe_sym(id_aa64smfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64SMFR0_EL1);
 	kvm_nvhe_sym(__icache_flags) = __icache_flags;
 	kvm_nvhe_sym(kvm_arm_vmid_bits) = kvm_arm_vmid_bits;
+
+	/* Propagate the FGT state to the nVHE side */
+	kvm_nvhe_sym(hfgrtr_masks)  = hfgrtr_masks;
+	kvm_nvhe_sym(hfgwtr_masks)  = hfgwtr_masks;
+	kvm_nvhe_sym(hfgitr_masks)  = hfgitr_masks;
+	kvm_nvhe_sym(hdfgrtr_masks) = hdfgrtr_masks;
+	kvm_nvhe_sym(hdfgwtr_masks) = hdfgwtr_masks;
+	kvm_nvhe_sym(hafgrtr_masks) = hafgrtr_masks;
+	kvm_nvhe_sym(hfgrtr2_masks) = hfgrtr2_masks;
+	kvm_nvhe_sym(hfgwtr2_masks) = hfgwtr2_masks;
+	kvm_nvhe_sym(hfgitr2_masks) = hfgitr2_masks;
+	kvm_nvhe_sym(hdfgrtr2_masks)= hdfgrtr2_masks;
+	kvm_nvhe_sym(hdfgwtr2_masks)= hdfgwtr2_masks;
+
+	/*
+	 * Flush entire BSS since part of its data containing init symbols is read
+	 * while the MMU is off.
+	 */
+	kvm_flush_dcache_to_poc(kvm_ksym_ref(__hyp_bss_start),
+				kvm_ksym_ref(__hyp_bss_end) - kvm_ksym_ref(__hyp_bss_start));
 }
 
 static int __init kvm_hyp_init_protection(u32 hyp_va_bits)
@@ -2471,14 +2542,6 @@ static void finalize_init_hyp_mode(void)
 			per_cpu_ptr_nvhe_sym(kvm_host_data, cpu)->sve_state =
 				kern_hyp_va(sve_state);
 		}
-	} else {
-		for_each_possible_cpu(cpu) {
-			struct user_fpsimd_state *fpsimd_state;
-
-			fpsimd_state = &per_cpu_ptr_nvhe_sym(kvm_host_data, cpu)->host_ctxt.fp_regs;
-			per_cpu_ptr_nvhe_sym(kvm_host_data, cpu)->fpsimd_state =
-				kern_hyp_va(fpsimd_state);
-		}
 	}
 }
 
@@ -2527,15 +2590,15 @@ static int __init init_hyp_mode(void)
 	 * Allocate stack pages for Hypervisor-mode
 	 */
 	for_each_possible_cpu(cpu) {
-		unsigned long stack_page;
+		unsigned long stack_base;
 
-		stack_page = __get_free_page(GFP_KERNEL);
-		if (!stack_page) {
+		stack_base = __get_free_pages(GFP_KERNEL, NVHE_STACK_SHIFT - PAGE_SHIFT);
+		if (!stack_base) {
 			err = -ENOMEM;
 			goto out_err;
 		}
 
-		per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page;
+		per_cpu(kvm_arm_hyp_stack_base, cpu) = stack_base;
 	}
 
 	/*
@@ -2566,6 +2629,13 @@ static int __init init_hyp_mode(void)
 		goto out_err;
 	}
 
+	err = create_hyp_mappings(kvm_ksym_ref(__hyp_data_start),
+				  kvm_ksym_ref(__hyp_data_end), PAGE_HYP);
+	if (err) {
+		kvm_err("Cannot map .hyp.data section\n");
+		goto out_err;
+	}
+
 	err = create_hyp_mappings(kvm_ksym_ref(__hyp_rodata_start),
 				  kvm_ksym_ref(__hyp_rodata_end), PAGE_HYP_RO);
 	if (err) {
@@ -2604,9 +2674,9 @@ static int __init init_hyp_mode(void)
 	 */
 	for_each_possible_cpu(cpu) {
 		struct kvm_nvhe_init_params *params = per_cpu_ptr_nvhe_sym(kvm_init_params, cpu);
-		char *stack_page = (char *)per_cpu(kvm_arm_hyp_stack_page, cpu);
+		char *stack_base = (char *)per_cpu(kvm_arm_hyp_stack_base, cpu);
 
-		err = create_hyp_stack(__pa(stack_page), &params->stack_hyp_va);
+		err = create_hyp_stack(__pa(stack_base), &params->stack_hyp_va);
 		if (err) {
 			kvm_err("Cannot map hyp stack\n");
 			goto out_err;
@@ -2618,7 +2688,7 @@ static int __init init_hyp_mode(void)
 		 * __hyp_pa() won't do the right thing there, since the stack
 		 * has been mapped in the flexible private VA space.
 		 */
-		params->stack_pa = __pa(stack_page);
+		params->stack_pa = __pa(stack_base);
 	}
 
 	for_each_possible_cpu(cpu) {
@@ -2705,28 +2775,54 @@ bool kvm_arch_irqchip_in_kernel(struct kvm *kvm)
 	return irqchip_in_kernel(kvm);
 }
 
-bool kvm_arch_has_irq_bypass(void)
-{
-	return true;
-}
-
 int kvm_arch_irq_bypass_add_producer(struct irq_bypass_consumer *cons,
 				      struct irq_bypass_producer *prod)
 {
 	struct kvm_kernel_irqfd *irqfd =
 		container_of(cons, struct kvm_kernel_irqfd, consumer);
+	struct kvm_kernel_irq_routing_entry *irq_entry = &irqfd->irq_entry;
+
+	/*
+	 * The only thing we have a chance of directly-injecting is LPIs. Maybe
+	 * one day...
+	 */
+	if (irq_entry->type != KVM_IRQ_ROUTING_MSI)
+		return 0;
 
 	return kvm_vgic_v4_set_forwarding(irqfd->kvm, prod->irq,
 					  &irqfd->irq_entry);
 }
+
 void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *cons,
 				      struct irq_bypass_producer *prod)
 {
 	struct kvm_kernel_irqfd *irqfd =
 		container_of(cons, struct kvm_kernel_irqfd, consumer);
+	struct kvm_kernel_irq_routing_entry *irq_entry = &irqfd->irq_entry;
+
+	if (irq_entry->type != KVM_IRQ_ROUTING_MSI)
+		return;
+
+	kvm_vgic_v4_unset_forwarding(irqfd->kvm, prod->irq);
+}
 
-	kvm_vgic_v4_unset_forwarding(irqfd->kvm, prod->irq,
-				     &irqfd->irq_entry);
+void kvm_arch_update_irqfd_routing(struct kvm_kernel_irqfd *irqfd,
+				   struct kvm_kernel_irq_routing_entry *old,
+				   struct kvm_kernel_irq_routing_entry *new)
+{
+	if (old->type == KVM_IRQ_ROUTING_MSI &&
+	    new->type == KVM_IRQ_ROUTING_MSI &&
+	    !memcmp(&old->msi, &new->msi, sizeof(new->msi)))
+		return;
+
+	/*
+	 * Remapping the vLPI requires taking the its_lock mutex to resolve
+	 * the new translation. We're in spinlock land at this point, so no
+	 * chance of resolving the translation.
+	 *
+	 * Unmap the vLPI and fall back to software LPI injection.
+	 */
+	return kvm_vgic_v4_unset_forwarding(irqfd->kvm, irqfd->producer->irq);
 }
 
 void kvm_arch_irq_bypass_stop(struct irq_bypass_consumer *cons)
@@ -2804,11 +2900,12 @@ static __init int kvm_arm_init(void)
 	if (err)
 		goto out_hyp;
 
-	kvm_info("%s%sVHE mode initialized successfully\n",
+	kvm_info("%s%sVHE%s mode initialized successfully\n",
 		 in_hyp_mode ? "" : (is_protected_kvm_enabled() ?
 				     "Protected " : "Hyp "),
 		 in_hyp_mode ? "" : (cpus_have_final_cap(ARM64_KVM_HVHE) ?
-				     "h" : "n"));
+				     "h" : "n"),
+		 cpus_have_final_cap(ARM64_HAS_NESTED_VIRT) ? "+NV2": "");
 
 	/*
 	 * FIXME: Do something reasonable if kvm_init() fails after pKVM
diff --git a/arch/arm64/kvm/at.c b/arch/arm64/kvm/at.c
index 8c5d7990e5b3..53bf70126f81 100644
--- a/arch/arm64/kvm/at.c
+++ b/arch/arm64/kvm/at.c
@@ -10,61 +10,11 @@
 #include <asm/kvm_hyp.h>
 #include <asm/kvm_mmu.h>
 
-enum trans_regime {
-	TR_EL10,
-	TR_EL20,
-	TR_EL2,
-};
-
-struct s1_walk_info {
-	u64	     		baddr;
-	enum trans_regime	regime;
-	unsigned int		max_oa_bits;
-	unsigned int		pgshift;
-	unsigned int		txsz;
-	int 	     		sl;
-	bool	     		hpd;
-	bool			e0poe;
-	bool			poe;
-	bool			pan;
-	bool	     		be;
-	bool	     		s2;
-};
-
-struct s1_walk_result {
-	union {
-		struct {
-			u64	desc;
-			u64	pa;
-			s8	level;
-			u8	APTable;
-			bool	UXNTable;
-			bool	PXNTable;
-			bool	uwxn;
-			bool	uov;
-			bool	ur;
-			bool	uw;
-			bool	ux;
-			bool	pwxn;
-			bool	pov;
-			bool	pr;
-			bool	pw;
-			bool	px;
-		};
-		struct {
-			u8	fst;
-			bool	ptw;
-			bool	s2;
-		};
-	};
-	bool	failed;
-};
-
-static void fail_s1_walk(struct s1_walk_result *wr, u8 fst, bool ptw, bool s2)
+static void fail_s1_walk(struct s1_walk_result *wr, u8 fst, bool s1ptw)
 {
 	wr->fst		= fst;
-	wr->ptw		= ptw;
-	wr->s2		= s2;
+	wr->ptw		= s1ptw;
+	wr->s2		= s1ptw;
 	wr->failed	= true;
 }
 
@@ -78,9 +28,57 @@ static int get_ia_size(struct s1_walk_info *wi)
 /* Return true if the IPA is out of the OA range */
 static bool check_output_size(u64 ipa, struct s1_walk_info *wi)
 {
+	if (wi->pa52bit)
+		return wi->max_oa_bits < 52 && (ipa & GENMASK_ULL(51, wi->max_oa_bits));
 	return wi->max_oa_bits < 48 && (ipa & GENMASK_ULL(47, wi->max_oa_bits));
 }
 
+static bool has_52bit_pa(struct kvm_vcpu *vcpu, struct s1_walk_info *wi, u64 tcr)
+{
+	switch (BIT(wi->pgshift)) {
+	case SZ_64K:
+	default:		/* IMPDEF: treat any other value as 64k */
+		if (!kvm_has_feat_enum(vcpu->kvm, ID_AA64MMFR0_EL1, PARANGE, 52))
+			return false;
+		return ((wi->regime == TR_EL2 ?
+			 FIELD_GET(TCR_EL2_PS_MASK, tcr) :
+			 FIELD_GET(TCR_IPS_MASK, tcr)) == 0b0110);
+	case SZ_16K:
+		if (!kvm_has_feat(vcpu->kvm, ID_AA64MMFR0_EL1, TGRAN16, 52_BIT))
+			return false;
+		break;
+	case SZ_4K:
+		if (!kvm_has_feat(vcpu->kvm, ID_AA64MMFR0_EL1, TGRAN4, 52_BIT))
+			return false;
+		break;
+	}
+
+	return (tcr & (wi->regime == TR_EL2 ? TCR_EL2_DS : TCR_DS));
+}
+
+static u64 desc_to_oa(struct s1_walk_info *wi, u64 desc)
+{
+	u64 addr;
+
+	if (!wi->pa52bit)
+		return desc & GENMASK_ULL(47, wi->pgshift);
+
+	switch (BIT(wi->pgshift)) {
+	case SZ_4K:
+	case SZ_16K:
+		addr = desc & GENMASK_ULL(49, wi->pgshift);
+		addr |= FIELD_GET(KVM_PTE_ADDR_51_50_LPA2, desc) << 50;
+		break;
+	case SZ_64K:
+	default:	    /* IMPDEF: treat any other value as 64k */
+		addr = desc & GENMASK_ULL(47, wi->pgshift);
+		addr |= FIELD_GET(KVM_PTE_ADDR_51_48, desc) << 48;
+		break;
+	}
+
+	return addr;
+}
+
 /* Return the translation regime that applies to an AT instruction */
 static enum trans_regime compute_translation_regime(struct kvm_vcpu *vcpu, u32 op)
 {
@@ -93,28 +91,32 @@ static enum trans_regime compute_translation_regime(struct kvm_vcpu *vcpu, u32 o
 	case OP_AT_S1E2W:
 	case OP_AT_S1E2A:
 		return vcpu_el2_e2h_is_set(vcpu) ? TR_EL20 : TR_EL2;
-		break;
 	default:
 		return (vcpu_el2_e2h_is_set(vcpu) &&
 			vcpu_el2_tge_is_set(vcpu)) ? TR_EL20 : TR_EL10;
 	}
 }
 
+static u64 effective_tcr2(struct kvm_vcpu *vcpu, enum trans_regime regime)
+{
+	if (regime == TR_EL10) {
+		if (vcpu_has_nv(vcpu) &&
+		    !(__vcpu_sys_reg(vcpu, HCRX_EL2) & HCRX_EL2_TCR2En))
+			return 0;
+
+		return vcpu_read_sys_reg(vcpu, TCR2_EL1);
+	}
+
+	return vcpu_read_sys_reg(vcpu, TCR2_EL2);
+}
+
 static bool s1pie_enabled(struct kvm_vcpu *vcpu, enum trans_regime regime)
 {
 	if (!kvm_has_s1pie(vcpu->kvm))
 		return false;
 
-	switch (regime) {
-	case TR_EL2:
-	case TR_EL20:
-		return vcpu_read_sys_reg(vcpu, TCR2_EL2) & TCR2_EL2_PIE;
-	case TR_EL10:
-		return  (__vcpu_sys_reg(vcpu, HCRX_EL2) & HCRX_EL2_TCR2En) &&
-			(__vcpu_sys_reg(vcpu, TCR2_EL1) & TCR2_EL1x_PIE);
-	default:
-		BUG();
-	}
+	/* Abuse TCR2_EL1_PIE and use it for EL2 as well */
+	return effective_tcr2(vcpu, regime) & TCR2_EL1_PIE;
 }
 
 static void compute_s1poe(struct kvm_vcpu *vcpu, struct s1_walk_info *wi)
@@ -126,45 +128,30 @@ static void compute_s1poe(struct kvm_vcpu *vcpu, struct s1_walk_info *wi)
 		return;
 	}
 
-	switch (wi->regime) {
-	case TR_EL2:
-	case TR_EL20:
-		val = vcpu_read_sys_reg(vcpu, TCR2_EL2);
-		wi->poe = val & TCR2_EL2_POE;
-		wi->e0poe = (wi->regime == TR_EL20) && (val & TCR2_EL2_E0POE);
-		break;
-	case TR_EL10:
-		if (__vcpu_sys_reg(vcpu, HCRX_EL2) & HCRX_EL2_TCR2En) {
-			wi->poe = wi->e0poe = false;
-			return;
-		}
+	val = effective_tcr2(vcpu, wi->regime);
 
-		val = __vcpu_sys_reg(vcpu, TCR2_EL1);
-		wi->poe = val & TCR2_EL1x_POE;
-		wi->e0poe = val & TCR2_EL1x_E0POE;
-	}
+	/* Abuse TCR2_EL1_* for EL2 */
+	wi->poe = val & TCR2_EL1_POE;
+	wi->e0poe = (wi->regime != TR_EL2) && (val & TCR2_EL1_E0POE);
 }
 
-static int setup_s1_walk(struct kvm_vcpu *vcpu, u32 op, struct s1_walk_info *wi,
+static int setup_s1_walk(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 			 struct s1_walk_result *wr, u64 va)
 {
 	u64 hcr, sctlr, tcr, tg, ps, ia_bits, ttbr;
 	unsigned int stride, x;
-	bool va55, tbi, lva, as_el0;
-
-	hcr = __vcpu_sys_reg(vcpu, HCR_EL2);
-
-	wi->regime = compute_translation_regime(vcpu, op);
-	as_el0 = (op == OP_AT_S1E0R || op == OP_AT_S1E0W);
-	wi->pan = (op == OP_AT_S1E1RP || op == OP_AT_S1E1WP) &&
-		  (*vcpu_cpsr(vcpu) & PSR_PAN_BIT);
+	bool va55, tbi, lva;
 
 	va55 = va & BIT(55);
 
-	if (wi->regime == TR_EL2 && va55)
-		goto addrsz;
-
-	wi->s2 = wi->regime == TR_EL10 && (hcr & (HCR_VM | HCR_DC));
+	if (vcpu_has_nv(vcpu)) {
+		hcr = __vcpu_sys_reg(vcpu, HCR_EL2);
+		wi->s2 = wi->regime == TR_EL10 && (hcr & (HCR_VM | HCR_DC));
+	} else {
+		WARN_ON_ONCE(wi->regime != TR_EL10);
+		wi->s2 = false;
+		hcr = 0;
+	}
 
 	switch (wi->regime) {
 	case TR_EL10:
@@ -186,6 +173,46 @@ static int setup_s1_walk(struct kvm_vcpu *vcpu, u32 op, struct s1_walk_info *wi,
 		BUG();
 	}
 
+	/* Someone was silly enough to encode TG0/TG1 differently */
+	if (va55 && wi->regime != TR_EL2) {
+		wi->txsz = FIELD_GET(TCR_T1SZ_MASK, tcr);
+		tg = FIELD_GET(TCR_TG1_MASK, tcr);
+
+		switch (tg << TCR_TG1_SHIFT) {
+		case TCR_TG1_4K:
+			wi->pgshift = 12;	 break;
+		case TCR_TG1_16K:
+			wi->pgshift = 14;	 break;
+		case TCR_TG1_64K:
+		default:	    /* IMPDEF: treat any other value as 64k */
+			wi->pgshift = 16;	 break;
+		}
+	} else {
+		wi->txsz = FIELD_GET(TCR_T0SZ_MASK, tcr);
+		tg = FIELD_GET(TCR_TG0_MASK, tcr);
+
+		switch (tg << TCR_TG0_SHIFT) {
+		case TCR_TG0_4K:
+			wi->pgshift = 12;	 break;
+		case TCR_TG0_16K:
+			wi->pgshift = 14;	 break;
+		case TCR_TG0_64K:
+		default:	    /* IMPDEF: treat any other value as 64k */
+			wi->pgshift = 16;	 break;
+		}
+	}
+
+	wi->pa52bit = has_52bit_pa(vcpu, wi, tcr);
+
+	ia_bits = get_ia_size(wi);
+
+	/* AArch64.S1StartLevel() */
+	stride = wi->pgshift - 3;
+	wi->sl = 3 - (((ia_bits - 1) - wi->pgshift) / stride);
+
+	if (wi->regime == TR_EL2 && va55)
+		goto addrsz;
+
 	tbi = (wi->regime == TR_EL2 ?
 	       FIELD_GET(TCR_EL2_TBI, tcr) :
 	       (va55 ?
@@ -195,6 +222,12 @@ static int setup_s1_walk(struct kvm_vcpu *vcpu, u32 op, struct s1_walk_info *wi,
 	if (!tbi && (u64)sign_extend64(va, 55) != va)
 		goto addrsz;
 
+	wi->sh = (wi->regime == TR_EL2 ?
+		  FIELD_GET(TCR_EL2_SH0_MASK, tcr) :
+		  (va55 ?
+		   FIELD_GET(TCR_SH1_MASK, tcr) :
+		   FIELD_GET(TCR_SH0_MASK, tcr)));
+
 	va = (u64)sign_extend64(va, 55);
 
 	/* Let's put the MMU disabled case aside immediately */
@@ -249,53 +282,20 @@ static int setup_s1_walk(struct kvm_vcpu *vcpu, u32 op, struct s1_walk_info *wi,
 	/* R_BVXDG */
 	wi->hpd |= (wi->poe || wi->e0poe);
 
-	/* Someone was silly enough to encode TG0/TG1 differently */
-	if (va55) {
-		wi->txsz = FIELD_GET(TCR_T1SZ_MASK, tcr);
-		tg = FIELD_GET(TCR_TG1_MASK, tcr);
-
-		switch (tg << TCR_TG1_SHIFT) {
-		case TCR_TG1_4K:
-			wi->pgshift = 12;	 break;
-		case TCR_TG1_16K:
-			wi->pgshift = 14;	 break;
-		case TCR_TG1_64K:
-		default:	    /* IMPDEF: treat any other value as 64k */
-			wi->pgshift = 16;	 break;
-		}
-	} else {
-		wi->txsz = FIELD_GET(TCR_T0SZ_MASK, tcr);
-		tg = FIELD_GET(TCR_TG0_MASK, tcr);
-
-		switch (tg << TCR_TG0_SHIFT) {
-		case TCR_TG0_4K:
-			wi->pgshift = 12;	 break;
-		case TCR_TG0_16K:
-			wi->pgshift = 14;	 break;
-		case TCR_TG0_64K:
-		default:	    /* IMPDEF: treat any other value as 64k */
-			wi->pgshift = 16;	 break;
-		}
-	}
-
 	/* R_PLCGL, R_YXNYW */
 	if (!kvm_has_feat_enum(vcpu->kvm, ID_AA64MMFR2_EL1, ST, 48_47)) {
 		if (wi->txsz > 39)
-			goto transfault_l0;
+			goto transfault;
 	} else {
 		if (wi->txsz > 48 || (BIT(wi->pgshift) == SZ_64K && wi->txsz > 47))
-			goto transfault_l0;
+			goto transfault;
 	}
 
 	/* R_GTJBY, R_SXWGM */
 	switch (BIT(wi->pgshift)) {
 	case SZ_4K:
-		lva = kvm_has_feat(vcpu->kvm, ID_AA64MMFR0_EL1, TGRAN4, 52_BIT);
-		lva &= tcr & (wi->regime == TR_EL2 ? TCR_EL2_DS : TCR_DS);
-		break;
 	case SZ_16K:
-		lva = kvm_has_feat(vcpu->kvm, ID_AA64MMFR0_EL1, TGRAN16, 52_BIT);
-		lva &= tcr & (wi->regime == TR_EL2 ? TCR_EL2_DS : TCR_DS);
+		lva = wi->pa52bit;
 		break;
 	case SZ_64K:
 		lva = kvm_has_feat(vcpu->kvm, ID_AA64MMFR2_EL1, VARange, 52);
@@ -303,38 +303,42 @@ static int setup_s1_walk(struct kvm_vcpu *vcpu, u32 op, struct s1_walk_info *wi,
 	}
 
 	if ((lva && wi->txsz < 12) || (!lva && wi->txsz < 16))
-		goto transfault_l0;
-
-	ia_bits = get_ia_size(wi);
+		goto transfault;
 
 	/* R_YYVYV, I_THCZK */
 	if ((!va55 && va > GENMASK(ia_bits - 1, 0)) ||
 	    (va55 && va < GENMASK(63, ia_bits)))
-		goto transfault_l0;
+		goto transfault;
 
 	/* I_ZFSYQ */
 	if (wi->regime != TR_EL2 &&
 	    (tcr & (va55 ? TCR_EPD1_MASK : TCR_EPD0_MASK)))
-		goto transfault_l0;
+		goto transfault;
 
 	/* R_BNDVG and following statements */
 	if (kvm_has_feat(vcpu->kvm, ID_AA64MMFR2_EL1, E0PD, IMP) &&
-	    as_el0 && (tcr & (va55 ? TCR_E0PD1 : TCR_E0PD0)))
-		goto transfault_l0;
-
-	/* AArch64.S1StartLevel() */
-	stride = wi->pgshift - 3;
-	wi->sl = 3 - (((ia_bits - 1) - wi->pgshift) / stride);
+	    wi->as_el0 && (tcr & (va55 ? TCR_E0PD1 : TCR_E0PD0)))
+		goto transfault;
 
 	ps = (wi->regime == TR_EL2 ?
 	      FIELD_GET(TCR_EL2_PS_MASK, tcr) : FIELD_GET(TCR_IPS_MASK, tcr));
 
-	wi->max_oa_bits = min(get_kvm_ipa_limit(), ps_to_output_size(ps));
+	wi->max_oa_bits = min(get_kvm_ipa_limit(), ps_to_output_size(ps, wi->pa52bit));
 
 	/* Compute minimal alignment */
 	x = 3 + ia_bits - ((3 - wi->sl) * stride + wi->pgshift);
 
 	wi->baddr = ttbr & TTBRx_EL1_BADDR;
+	if (wi->pa52bit) {
+		/*
+		 * Force the alignment on 64 bytes for top-level tables
+		 * smaller than 8 entries, since TTBR.BADDR[5:2] are used to
+		 * store bits [51:48] of the first level of lookup.
+		 */
+		x = max(x, 6);
+
+		wi->baddr |= FIELD_GET(GENMASK_ULL(5, 2), ttbr) << 48;
+	}
 
 	/* R_VPBBF */
 	if (check_output_size(wi->baddr, wi))
@@ -342,21 +346,63 @@ static int setup_s1_walk(struct kvm_vcpu *vcpu, u32 op, struct s1_walk_info *wi,
 
 	wi->baddr &= GENMASK_ULL(wi->max_oa_bits - 1, x);
 
+	wi->ha  = kvm_has_feat(vcpu->kvm, ID_AA64MMFR1_EL1, HAFDBS, AF);
+	wi->ha &= (wi->regime == TR_EL2 ?
+		  FIELD_GET(TCR_EL2_HA, tcr) :
+		  FIELD_GET(TCR_HA, tcr));
+
 	return 0;
 
-addrsz:				/* Address Size Fault level 0 */
-	fail_s1_walk(wr, ESR_ELx_FSC_ADDRSZ_L(0), false, false);
+addrsz:
+	/*
+	 * Address Size Fault level 0 to indicate it comes from TTBR.
+	 * yes, this is an oddity.
+	 */
+	fail_s1_walk(wr, ESR_ELx_FSC_ADDRSZ_L(0), false);
 	return -EFAULT;
 
-transfault_l0:			/* Translation Fault level 0 */
-	fail_s1_walk(wr, ESR_ELx_FSC_FAULT_L(0), false, false);
+transfault:
+	/* Translation Fault on start level */
+	fail_s1_walk(wr, ESR_ELx_FSC_FAULT_L(wi->sl), false);
 	return -EFAULT;
 }
 
+static int kvm_read_s1_desc(struct kvm_vcpu *vcpu, u64 pa, u64 *desc,
+			    struct s1_walk_info *wi)
+{
+	u64 val;
+	int r;
+
+	r = kvm_read_guest(vcpu->kvm, pa, &val, sizeof(val));
+	if (r)
+		return r;
+
+	if (wi->be)
+		*desc = be64_to_cpu((__force __be64)val);
+	else
+		*desc = le64_to_cpu((__force __le64)val);
+
+	return 0;
+}
+
+static int kvm_swap_s1_desc(struct kvm_vcpu *vcpu, u64 pa, u64 old, u64 new,
+			    struct s1_walk_info *wi)
+{
+	if (wi->be) {
+		old = (__force u64)cpu_to_be64(old);
+		new = (__force u64)cpu_to_be64(new);
+	} else {
+		old = (__force u64)cpu_to_le64(old);
+		new = (__force u64)cpu_to_le64(new);
+	}
+
+	return __kvm_at_swap_desc(vcpu->kvm, pa, old, new);
+}
+
 static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 		   struct s1_walk_result *wr, u64 va)
 {
-	u64 va_top, va_bottom, baddr, desc;
+	u64 va_top, va_bottom, baddr, desc, new_desc, ipa;
 	int level, stride, ret;
 
 	level = wi->sl;
@@ -366,7 +412,7 @@ static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 	va_top = get_ia_size(wi) - 1;
 
 	while (1) {
-		u64 index, ipa;
+		u64 index;
 
 		va_bottom = (3 - level) * stride + wi->pgshift;
 		index = (va & GENMASK_ULL(va_top, va_bottom)) >> (va_bottom - 3);
@@ -380,13 +426,13 @@ static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 			if (ret) {
 				fail_s1_walk(wr,
 					     (s2_trans.esr & ~ESR_ELx_FSC_LEVEL) | level,
-					     true, true);
+					     true);
 				return ret;
 			}
 
 			if (!kvm_s2_trans_readable(&s2_trans)) {
 				fail_s1_walk(wr, ESR_ELx_FSC_PERM_L(level),
-					     true, true);
+					     true);
 
 				return -EPERM;
 			}
@@ -394,17 +440,24 @@ static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 			ipa = kvm_s2_trans_output(&s2_trans);
 		}
 
-		ret = kvm_read_guest(vcpu->kvm, ipa, &desc, sizeof(desc));
+		if (wi->filter) {
+			ret = wi->filter->fn(&(struct s1_walk_context)
+					     {
+						     .wi	= wi,
+						     .table_ipa	= baddr,
+						     .level	= level,
+					     }, wi->filter->priv);
+			if (ret)
+				return ret;
+		}
+
+		ret = kvm_read_s1_desc(vcpu, ipa, &desc, wi);
 		if (ret) {
-			fail_s1_walk(wr, ESR_ELx_FSC_SEA_TTW(level),
-				     true, false);
+			fail_s1_walk(wr, ESR_ELx_FSC_SEA_TTW(level), false);
 			return ret;
 		}
 
-		if (wi->be)
-			desc = be64_to_cpu((__force __be64)desc);
-		else
-			desc = le64_to_cpu((__force __le64)desc);
+		new_desc = desc;
 
 		/* Invalid descriptor */
 		if (!(desc & BIT(0)))
@@ -425,7 +478,7 @@ static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 			wr->PXNTable |= FIELD_GET(PMD_TABLE_PXN, desc);
 		}
 
-		baddr = desc & GENMASK_ULL(47, wi->pgshift);
+		baddr = desc_to_oa(wi, desc);
 
 		/* Check for out-of-range OA */
 		if (check_output_size(baddr, wi))
@@ -442,11 +495,11 @@ static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 
 		switch (BIT(wi->pgshift)) {
 		case SZ_4K:
-			valid_block = level == 1 || level == 2;
+			valid_block = level == 1 || level == 2 || (wi->pa52bit && level == 0);
 			break;
 		case SZ_16K:
 		case SZ_64K:
-			valid_block = level == 2;
+			valid_block = level == 2 || (wi->pa52bit && level == 1);
 			break;
 		}
 
@@ -454,24 +507,68 @@ static int walk_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
 			goto transfault;
 	}
 
-	if (check_output_size(desc & GENMASK(47, va_bottom), wi))
+	baddr = desc_to_oa(wi, desc);
+	if (check_output_size(baddr & GENMASK(52, va_bottom), wi))
 		goto addrsz;
 
+	if (wi->ha)
+		new_desc |= PTE_AF;
+
+	if (new_desc != desc) {
+		ret = kvm_swap_s1_desc(vcpu, ipa, desc, new_desc, wi);
+		if (ret)
+			return ret;
+
+		desc = new_desc;
+	}
+
+	if (!(desc & PTE_AF)) {
+		fail_s1_walk(wr, ESR_ELx_FSC_ACCESS_L(level), false);
+		return -EACCES;
+	}
+
 	va_bottom += contiguous_bit_shift(desc, wi, level);
 
 	wr->failed = false;
 	wr->level = level;
 	wr->desc = desc;
-	wr->pa = desc & GENMASK(47, va_bottom);
+	wr->pa = baddr & GENMASK(52, va_bottom);
 	wr->pa |= va & GENMASK_ULL(va_bottom - 1, 0);
 
+	wr->nG = (wi->regime != TR_EL2) && (desc & PTE_NG);
+	if (wr->nG) {
+		u64 asid_ttbr, tcr;
+
+		switch (wi->regime) {
+		case TR_EL10:
+			tcr = vcpu_read_sys_reg(vcpu, TCR_EL1);
+			asid_ttbr = ((tcr & TCR_A1) ?
+				     vcpu_read_sys_reg(vcpu, TTBR1_EL1) :
+				     vcpu_read_sys_reg(vcpu, TTBR0_EL1));
+			break;
+		case TR_EL20:
+			tcr = vcpu_read_sys_reg(vcpu, TCR_EL2);
+			asid_ttbr = ((tcr & TCR_A1) ?
+				     vcpu_read_sys_reg(vcpu, TTBR1_EL2) :
+				     vcpu_read_sys_reg(vcpu, TTBR0_EL2));
+			break;
+		default:
+			BUG();
+		}
+
+		wr->asid = FIELD_GET(TTBR_ASID_MASK, asid_ttbr);
+		if (!kvm_has_feat_enum(vcpu->kvm, ID_AA64MMFR0_EL1, ASIDBITS, 16) ||
+		    !(tcr & TCR_ASID16))
+			wr->asid &= GENMASK(7, 0);
+	}
+
 	return 0;
 
 addrsz:
-	fail_s1_walk(wr, ESR_ELx_FSC_ADDRSZ_L(level), true, false);
+	fail_s1_walk(wr, ESR_ELx_FSC_ADDRSZ_L(level), false);
 	return -EINVAL;
 transfault:
-	fail_s1_walk(wr, ESR_ELx_FSC_FAULT_L(level), true, false);
+	fail_s1_walk(wr, ESR_ELx_FSC_FAULT_L(level), false);
 	return -ENOENT;
 }
 
@@ -488,7 +585,6 @@ struct mmu_config {
 	u64	sctlr;
 	u64	vttbr;
 	u64	vtcr;
-	u64	hcr;
 };
 
 static void __mmu_config_save(struct mmu_config *config)
@@ -511,13 +607,10 @@ static void __mmu_config_save(struct mmu_config *config)
 	config->sctlr	= read_sysreg_el1(SYS_SCTLR);
 	config->vttbr	= read_sysreg(vttbr_el2);
 	config->vtcr	= read_sysreg(vtcr_el2);
-	config->hcr	= read_sysreg(hcr_el2);
 }
 
 static void __mmu_config_restore(struct mmu_config *config)
 {
-	write_sysreg(config->hcr,	hcr_el2);
-
 	/*
 	 * ARM errata 1165522 and 1530923 require TGE to be 1 before
 	 * we update the guest state.
@@ -668,21 +761,36 @@ static u8 combine_s1_s2_attr(u8 s1, u8 s2)
 #define ATTR_OSH	0b10
 #define ATTR_ISH	0b11
 
-static u8 compute_sh(u8 attr, u64 desc)
+static u8 compute_final_sh(u8 attr, u8 sh)
 {
-	u8 sh;
-
 	/* Any form of device, as well as NC has SH[1:0]=0b10 */
 	if (MEMATTR_IS_DEVICE(attr) || attr == MEMATTR(NC, NC))
 		return ATTR_OSH;
 
-	sh = FIELD_GET(PTE_SHARED, desc);
 	if (sh == ATTR_RSV)		/* Reserved, mapped to NSH */
 		sh = ATTR_NSH;
 
 	return sh;
 }
 
+static u8 compute_s1_sh(struct s1_walk_info *wi, struct s1_walk_result *wr,
+			u8 attr)
+{
+	u8 sh;
+
+	/*
+	 * non-52bit and LPA have their basic shareability described in the
+	 * descriptor. LPA2 gets it from the corresponding field in TCR,
+	 * conveniently recorded in the walk info.
+	 */
+	if (!wi->pa52bit || BIT(wi->pgshift) == SZ_64K)
+		sh = FIELD_GET(KVM_PTE_LEAF_ATTR_LO_S1_SH, wr->desc);
+	else
+		sh = wi->sh;
+
+	return compute_final_sh(attr, sh);
+}
+
 static u8 combine_sh(u8 s1_sh, u8 s2_sh)
 {
 	if (s1_sh == ATTR_OSH || s2_sh == ATTR_OSH)
@@ -696,7 +804,7 @@ static u8 combine_sh(u8 s1_sh, u8 s2_sh)
 static u64 compute_par_s12(struct kvm_vcpu *vcpu, u64 s1_par,
 			   struct kvm_s2_trans *tr)
 {
-	u8 s1_parattr, s2_memattr, final_attr;
+	u8 s1_parattr, s2_memattr, final_attr, s2_sh;
 	u64 par;
 
 	/* If S2 has failed to translate, report the damage */
@@ -739,8 +847,15 @@ static u64 compute_par_s12(struct kvm_vcpu *vcpu, u64 s1_par,
 			final_attr = s1_parattr;
 			break;
 		default:
-			/* MemAttr[2]=0, Device from S2 */
-			final_attr = s2_memattr & GENMASK(1,0) << 2;
+			/*
+			 * MemAttr[2]=0, Device from S2.
+			 *
+			 * FWB does not influence the way that stage 1
+			 * memory types and attributes are combined
+			 * with stage 2 Device type and attributes.
+			 */
+			final_attr = min(s2_memattr_to_attr(s2_memattr),
+					 s1_parattr);
 		}
 	} else {
 		/* Combination of R_HMNDG, R_TNHFM and R_GQFSF */
@@ -762,17 +877,19 @@ static u64 compute_par_s12(struct kvm_vcpu *vcpu, u64 s1_par,
 	    !MEMATTR_IS_DEVICE(final_attr))
 		final_attr = MEMATTR(NC, NC);
 
+	s2_sh = FIELD_GET(KVM_PTE_LEAF_ATTR_LO_S2_SH, tr->desc);
+
 	par  = FIELD_PREP(SYS_PAR_EL1_ATTR, final_attr);
 	par |= tr->output & GENMASK(47, 12);
 	par |= FIELD_PREP(SYS_PAR_EL1_SH,
 			  combine_sh(FIELD_GET(SYS_PAR_EL1_SH, s1_par),
-				     compute_sh(final_attr, tr->desc)));
+				     compute_final_sh(final_attr, s2_sh)));
 
 	return par;
 }
 
-static u64 compute_par_s1(struct kvm_vcpu *vcpu, struct s1_walk_result *wr,
-			  enum trans_regime regime)
+static u64 compute_par_s1(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
+			  struct s1_walk_result *wr)
 {
 	u64 par;
 
@@ -785,9 +902,9 @@ static u64 compute_par_s1(struct kvm_vcpu *vcpu, struct s1_walk_result *wr,
 	} else if (wr->level == S1_MMU_DISABLED) {
 		/* MMU off or HCR_EL2.DC == 1 */
 		par  = SYS_PAR_EL1_NSE;
-		par |= wr->pa & GENMASK_ULL(47, 12);
+		par |= wr->pa & SYS_PAR_EL1_PA;
 
-		if (regime == TR_EL10 &&
+		if (wi->regime == TR_EL10 && vcpu_has_nv(vcpu) &&
 		    (__vcpu_sys_reg(vcpu, HCR_EL2) & HCR_DC)) {
 			par |= FIELD_PREP(SYS_PAR_EL1_ATTR,
 					  MEMATTR(WbRaWa, WbRaWa));
@@ -802,14 +919,14 @@ static u64 compute_par_s1(struct kvm_vcpu *vcpu, struct s1_walk_result *wr,
 
 		par  = SYS_PAR_EL1_NSE;
 
-		mair = (regime == TR_EL10 ?
+		mair = (wi->regime == TR_EL10 ?
 			vcpu_read_sys_reg(vcpu, MAIR_EL1) :
 			vcpu_read_sys_reg(vcpu, MAIR_EL2));
 
 		mair >>= FIELD_GET(PTE_ATTRINDX_MASK, wr->desc) * 8;
 		mair &= 0xff;
 
-		sctlr = (regime == TR_EL10 ?
+		sctlr = (wi->regime == TR_EL10 ?
 			 vcpu_read_sys_reg(vcpu, SCTLR_EL1) :
 			 vcpu_read_sys_reg(vcpu, SCTLR_EL2));
 
@@ -818,9 +935,9 @@ static u64 compute_par_s1(struct kvm_vcpu *vcpu, struct s1_walk_result *wr,
 			mair = MEMATTR(NC, NC);
 
 		par |= FIELD_PREP(SYS_PAR_EL1_ATTR, mair);
-		par |= wr->pa & GENMASK_ULL(47, 12);
+		par |= wr->pa & SYS_PAR_EL1_PA;
 
-		sh = compute_sh(mair, wr->desc);
+		sh = compute_s1_sh(wi, wr, mair);
 		par |= FIELD_PREP(SYS_PAR_EL1_SH, sh);
 	}
 
@@ -894,7 +1011,7 @@ static void compute_s1_direct_permissions(struct kvm_vcpu *vcpu,
 		wxn = (vcpu_read_sys_reg(vcpu, SCTLR_EL2) & SCTLR_ELx_WXN);
 		break;
 	case TR_EL10:
-		wxn = (__vcpu_sys_reg(vcpu, SCTLR_EL1) & SCTLR_ELx_WXN);
+		wxn = (vcpu_read_sys_reg(vcpu, SCTLR_EL1) & SCTLR_ELx_WXN);
 		break;
 	}
 
@@ -1068,37 +1185,54 @@ static void compute_s1_overlay_permissions(struct kvm_vcpu *vcpu,
 
 	idx = FIELD_GET(PTE_PO_IDX_MASK, wr->desc);
 
-	switch (wi->regime) {
-	case TR_EL10:
-		pov_perms = perm_idx(vcpu, POR_EL1, idx);
-		uov_perms = perm_idx(vcpu, POR_EL0, idx);
-		break;
-	case TR_EL20:
-		pov_perms = perm_idx(vcpu, POR_EL2, idx);
-		uov_perms = perm_idx(vcpu, POR_EL0, idx);
-		break;
-	case TR_EL2:
-		pov_perms = perm_idx(vcpu, POR_EL2, idx);
-		uov_perms = 0;
-		break;
-	}
+	if (wr->pov) {
+		switch (wi->regime) {
+		case TR_EL10:
+			pov_perms = perm_idx(vcpu, POR_EL1, idx);
+			break;
+		case TR_EL20:
+			pov_perms = perm_idx(vcpu, POR_EL2, idx);
+			break;
+		case TR_EL2:
+			pov_perms = perm_idx(vcpu, POR_EL2, idx);
+			break;
+		}
+
+		if (pov_perms & ~POE_RWX)
+			pov_perms = POE_NONE;
 
-	if (pov_perms & ~POE_RXW)
-		pov_perms = POE_NONE;
+		/* R_QXXPC, S1PrivOverflow enabled */
+		if (wr->pwxn && (pov_perms & POE_X))
+			pov_perms &= ~POE_W;
 
-	if (wi->poe && wr->pov) {
 		wr->pr &= pov_perms & POE_R;
-		wr->px &= pov_perms & POE_X;
 		wr->pw &= pov_perms & POE_W;
+		wr->px &= pov_perms & POE_X;
 	}
 
-	if (uov_perms & ~POE_RXW)
-		uov_perms = POE_NONE;
+	if (wr->uov) {
+		switch (wi->regime) {
+		case TR_EL10:
+			uov_perms = perm_idx(vcpu, POR_EL0, idx);
+			break;
+		case TR_EL20:
+			uov_perms = perm_idx(vcpu, POR_EL0, idx);
+			break;
+		case TR_EL2:
+			uov_perms = 0;
+			break;
+		}
+
+		if (uov_perms & ~POE_RWX)
+			uov_perms = POE_NONE;
+
+		/* R_NPBXC, S1UnprivOverlay enabled */
+		if (wr->uwxn && (uov_perms & POE_X))
+			uov_perms &= ~POE_W;
 
-	if (wi->e0poe && wr->uov) {
 		wr->ur &= uov_perms & POE_R;
-		wr->ux &= uov_perms & POE_X;
 		wr->uw &= uov_perms & POE_W;
+		wr->ux &= uov_perms & POE_X;
 	}
 }
 
@@ -1116,24 +1250,15 @@ static void compute_s1_permissions(struct kvm_vcpu *vcpu,
 	if (!wi->hpd)
 		compute_s1_hierarchical_permissions(vcpu, wi, wr);
 
-	if (wi->poe || wi->e0poe)
-		compute_s1_overlay_permissions(vcpu, wi, wr);
+	compute_s1_overlay_permissions(vcpu, wi, wr);
 
-	/* R_QXXPC */
-	if (wr->pwxn) {
-		if (!wr->pov && wr->pw)
-			wr->px = false;
-		if (wr->pov && wr->px)
-			wr->pw = false;
-	}
+	/* R_QXXPC, S1PrivOverlay disabled */
+	if (!wr->pov)
+		wr->px &= !(wr->pwxn && wr->pw);
 
-	/* R_NPBXC */
-	if (wr->uwxn) {
-		if (!wr->uov && wr->uw)
-			wr->ux = false;
-		if (wr->uov && wr->ux)
-			wr->uw = false;
-	}
+	/* R_NPBXC, S1UnprivOverlay disabled */
+	if (!wr->uov)
+		wr->ux &= !(wr->uwxn && wr->uw);
 
 	pan = wi->pan && (wr->ur || wr->uw ||
 			  (pan3_enabled(vcpu, wi->regime) && wr->ux));
@@ -1141,14 +1266,19 @@ static void compute_s1_permissions(struct kvm_vcpu *vcpu,
 	wr->pr &= !pan;
 }
 
-static u64 handle_at_slow(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
+static int handle_at_slow(struct kvm_vcpu *vcpu, u32 op, u64 vaddr, u64 *par)
 {
 	struct s1_walk_result wr = {};
 	struct s1_walk_info wi = {};
 	bool perm_fail = false;
 	int ret, idx;
 
-	ret = setup_s1_walk(vcpu, op, &wi, &wr, vaddr);
+	wi.regime = compute_translation_regime(vcpu, op);
+	wi.as_el0 = (op == OP_AT_S1E0R || op == OP_AT_S1E0W);
+	wi.pan = (op == OP_AT_S1E1RP || op == OP_AT_S1E1WP) &&
+		 (*vcpu_cpsr(vcpu) & PSR_PAN_BIT);
+
+	ret = setup_s1_walk(vcpu, &wi, &wr, vaddr);
 	if (ret)
 		goto compute_par;
 
@@ -1161,6 +1291,11 @@ static u64 handle_at_slow(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 
 	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 
+	/*
+	 * Race to update a descriptor -- restart the walk.
+	 */
+	if (ret == -EAGAIN)
+		return ret;
 	if (ret)
 		goto compute_par;
 
@@ -1191,10 +1326,11 @@ static u64 handle_at_slow(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 	}
 
 	if (perm_fail)
-		fail_s1_walk(&wr, ESR_ELx_FSC_PERM_L(wr.level), false, false);
+		fail_s1_walk(&wr, ESR_ELx_FSC_PERM_L(wr.level), false);
 
 compute_par:
-	return compute_par_s1(vcpu, &wr, wi.regime);
+	*par = compute_par_s1(vcpu, &wi, &wr);
+	return 0;
 }
 
 /*
@@ -1203,13 +1339,14 @@ compute_par:
  * If the translation is unsuccessful, the value may only contain
  * PAR_EL1.F, and cannot be taken at face value. It isn't an
  * indication of the translation having failed, only that the fast
- * path did not succeed, *unless* it indicates a S1 permission fault.
+ * path did not succeed, *unless* it indicates a S1 permission or
+ * access fault.
  */
 static u64 __kvm_at_s1e01_fast(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 {
 	struct mmu_config config;
 	struct kvm_s2_mmu *mmu;
-	bool fail;
+	bool fail, mmu_cs;
 	u64 par;
 
 	par = SYS_PAR_EL1_F;
@@ -1225,8 +1362,13 @@ static u64 __kvm_at_s1e01_fast(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 	 * If HCR_EL2.{E2H,TGE} == {1,1}, the MMU context is already
 	 * the right one (as we trapped from vEL2). If not, save the
 	 * full MMU context.
+	 *
+	 * We are also guaranteed to be in the correct context if
+	 * we're not in a nested VM.
 	 */
-	if (vcpu_el2_e2h_is_set(vcpu) && vcpu_el2_tge_is_set(vcpu))
+	mmu_cs = (vcpu_has_nv(vcpu) &&
+		  !(vcpu_el2_e2h_is_set(vcpu) && vcpu_el2_tge_is_set(vcpu)));
+	if (!mmu_cs)
 		goto skip_mmu_switch;
 
 	/*
@@ -1259,8 +1401,8 @@ static u64 __kvm_at_s1e01_fast(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 	__load_stage2(mmu, mmu->arch);
 
 skip_mmu_switch:
-	/* Clear TGE, enable S2 translation, we're rolling */
-	write_sysreg((config.hcr & ~HCR_TGE) | HCR_VM,	hcr_el2);
+	/* Temporarily switch back to guest context */
+	write_sysreg_hcr(vcpu->arch.hcr_el2);
 	isb();
 
 	switch (op) {
@@ -1292,7 +1434,9 @@ skip_mmu_switch:
 	if (!fail)
 		par = read_sysreg_par();
 
-	if (!(vcpu_el2_e2h_is_set(vcpu) && vcpu_el2_tge_is_set(vcpu)))
+	write_sysreg_hcr(HCR_HOST_VHE_FLAGS);
+
+	if (mmu_cs)
 		__mmu_config_restore(&config);
 
 	return par;
@@ -1306,27 +1450,43 @@ static bool par_check_s1_perm_fault(u64 par)
 		 !(par & SYS_PAR_EL1_S));
 }
 
-void __kvm_at_s1e01(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
+static bool par_check_s1_access_fault(u64 par)
+{
+	u8 fst = FIELD_GET(SYS_PAR_EL1_FST, par);
+
+	return  ((fst & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_ACCESS &&
+		 !(par & SYS_PAR_EL1_S));
+}
+
+int __kvm_at_s1e01(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 {
 	u64 par = __kvm_at_s1e01_fast(vcpu, op, vaddr);
+	int ret;
 
 	/*
-	 * If PAR_EL1 reports that AT failed on a S1 permission fault, we
-	 * know for sure that the PTW was able to walk the S1 tables and
-	 * there's nothing else to do.
+	 * If PAR_EL1 reports that AT failed on a S1 permission or access
+	 * fault, we know for sure that the PTW was able to walk the S1
+	 * tables and there's nothing else to do.
 	 *
 	 * If AT failed for any other reason, then we must walk the guest S1
 	 * to emulate the instruction.
 	 */
-	if ((par & SYS_PAR_EL1_F) && !par_check_s1_perm_fault(par))
-		par = handle_at_slow(vcpu, op, vaddr);
+	if ((par & SYS_PAR_EL1_F) &&
+	    !par_check_s1_perm_fault(par) &&
+	    !par_check_s1_access_fault(par)) {
+		ret = handle_at_slow(vcpu, op, vaddr, &par);
+		if (ret)
+			return ret;
+	}
 
 	vcpu_write_sys_reg(vcpu, par, PAR_EL1);
+	return 0;
 }
 
-void __kvm_at_s1e2(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
+int __kvm_at_s1e2(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 {
 	u64 par;
+	int ret;
 
 	/*
 	 * We've trapped, so everything is live on the CPU. As we will be
@@ -1343,7 +1503,7 @@ void __kvm_at_s1e2(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 		if (!vcpu_el2_e2h_is_set(vcpu))
 			val |= HCR_NV | HCR_NV1;
 
-		write_sysreg(val, hcr_el2);
+		write_sysreg_hcr(val);
 		isb();
 
 		par = SYS_PAR_EL1_F;
@@ -1368,18 +1528,22 @@ void __kvm_at_s1e2(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 		if (!fail)
 			par = read_sysreg_par();
 
-		write_sysreg(hcr, hcr_el2);
+		write_sysreg_hcr(hcr);
 		isb();
 	}
 
 	/* We failed the translation, let's replay it in slow motion */
-	if ((par & SYS_PAR_EL1_F) && !par_check_s1_perm_fault(par))
-		par = handle_at_slow(vcpu, op, vaddr);
+	if ((par & SYS_PAR_EL1_F) && !par_check_s1_perm_fault(par)) {
+		ret = handle_at_slow(vcpu, op, vaddr, &par);
+		if (ret)
+			return ret;
+	}
 
 	vcpu_write_sys_reg(vcpu, par, PAR_EL1);
+	return 0;
 }
 
-void __kvm_at_s12(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
+int __kvm_at_s12(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 {
 	struct kvm_s2_trans out = {};
 	u64 ipa, par;
@@ -1406,28 +1570,28 @@ void __kvm_at_s12(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 		break;
 	default:
 		WARN_ON_ONCE(1);
-		return;
+		return 0;
 	}
 
 	__kvm_at_s1e01(vcpu, op, vaddr);
 	par = vcpu_read_sys_reg(vcpu, PAR_EL1);
 	if (par & SYS_PAR_EL1_F)
-		return;
+		return 0;
 
 	/*
-	 * If we only have a single stage of translation (E2H=0 or
-	 * TGE=1), exit early. Same thing if {VM,DC}=={0,0}.
+	 * If we only have a single stage of translation (EL2&0), exit
+	 * early. Same thing if {VM,DC}=={0,0}.
 	 */
-	if (!vcpu_el2_e2h_is_set(vcpu) || vcpu_el2_tge_is_set(vcpu) ||
+	if (compute_translation_regime(vcpu, op) == TR_EL20 ||
 	    !(vcpu_read_sys_reg(vcpu, HCR_EL2) & (HCR_VM | HCR_DC)))
-		return;
+		return 0;
 
 	/* Do the stage-2 translation */
 	ipa = (par & GENMASK_ULL(47, 12)) | (vaddr & GENMASK_ULL(11, 0));
 	out.esr = 0;
 	ret = kvm_walk_nested_s2(vcpu, ipa, &out);
 	if (ret < 0)
-		return;
+		return ret;
 
 	/* Check the access permission */
 	if (!out.esr &&
@@ -1436,4 +1600,196 @@ void __kvm_at_s12(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 
 	par = compute_par_s12(vcpu, par, &out);
 	vcpu_write_sys_reg(vcpu, par, PAR_EL1);
+	return 0;
+}
+
+/*
+ * Translate a VA for a given EL in a given translation regime, with
+ * or without PAN. This requires wi->{regime, as_el0, pan} to be
+ * set. The rest of the wi and wr should be 0-initialised.
+ */
+int __kvm_translate_va(struct kvm_vcpu *vcpu, struct s1_walk_info *wi,
+		       struct s1_walk_result *wr, u64 va)
+{
+	int ret;
+
+	ret = setup_s1_walk(vcpu, wi, wr, va);
+	if (ret)
+		return ret;
+
+	if (wr->level == S1_MMU_DISABLED) {
+		wr->ur = wr->uw = wr->ux = true;
+		wr->pr = wr->pw = wr->px = true;
+	} else {
+		ret = walk_s1(vcpu, wi, wr, va);
+		if (ret)
+			return ret;
+
+		compute_s1_permissions(vcpu, wi, wr);
+	}
+
+	return 0;
+}
+
+struct desc_match {
+	u64	ipa;
+	int	level;
+};
+
+static int match_s1_desc(struct s1_walk_context *ctxt, void *priv)
+{
+	struct desc_match *dm = priv;
+	u64 ipa = dm->ipa;
+
+	/* Use S1 granule alignment */
+	ipa &= GENMASK(51, ctxt->wi->pgshift);
+
+	/* Not the IPA we're looking for? Continue. */
+	if (ipa != ctxt->table_ipa)
+		return 0;
+
+	/* Note the level and interrupt the walk */
+	dm->level = ctxt->level;
+	return -EINTR;
+}
+
+int __kvm_find_s1_desc_level(struct kvm_vcpu *vcpu, u64 va, u64 ipa, int *level)
+{
+	struct desc_match dm = {
+		.ipa	= ipa,
+	};
+	struct s1_walk_info wi = {
+		.filter	= &(struct s1_walk_filter){
+			.fn	= match_s1_desc,
+			.priv	= &dm,
+		},
+		.as_el0	= false,
+		.pan	= false,
+	};
+	struct s1_walk_result wr = {};
+	int ret;
+
+	if (is_hyp_ctxt(vcpu))
+		wi.regime = vcpu_el2_e2h_is_set(vcpu) ? TR_EL20 : TR_EL2;
+	else
+		wi.regime = TR_EL10;
+
+	ret = setup_s1_walk(vcpu, &wi, &wr, va);
+	if (ret)
+		return ret;
+
+	/* We really expect the S1 MMU to be on here... */
+	if (WARN_ON_ONCE(wr.level == S1_MMU_DISABLED)) {
+		*level = 0;
+		return 0;
+	}
+
+	/* Walk the guest's PT, looking for a match along the way */
+	ret = walk_s1(vcpu, &wi, &wr, va);
+	switch (ret) {
+	case -EINTR:
+		/* We interrupted the walk on a match, return the level */
+		*level = dm.level;
+		return 0;
+	case 0:
+		/* The walk completed, we failed to find the entry */
+		return -ENOENT;
+	default:
+		/* Any other error... */
+		return ret;
+	}
+}
+
+#ifdef CONFIG_ARM64_LSE_ATOMICS
+static int __lse_swap_desc(u64 __user *ptep, u64 old, u64 new)
+{
+	u64 tmp = old;
+	int ret = 0;
+
+	uaccess_enable_privileged();
+
+	asm volatile(__LSE_PREAMBLE
+		     "1: cas	%[old], %[new], %[addr]\n"
+		     "2:\n"
+		     _ASM_EXTABLE_UACCESS_ERR(1b, 2b, %w[ret])
+		     : [old] "+r" (old), [addr] "+Q" (*ptep), [ret] "+r" (ret)
+		     : [new] "r" (new)
+		     : "memory");
+
+	uaccess_disable_privileged();
+
+	if (ret)
+		return ret;
+	if (tmp != old)
+		return -EAGAIN;
+
+	return ret;
+}
+#else
+static int __lse_swap_desc(u64 __user *ptep, u64 old, u64 new)
+{
+	return -EINVAL;
+}
+#endif
+
+static int __llsc_swap_desc(u64 __user *ptep, u64 old, u64 new)
+{
+	int ret = 1;
+	u64 tmp;
+
+	uaccess_enable_privileged();
+
+	asm volatile("prfm	pstl1strm, %[addr]\n"
+		     "1: ldxr	%[tmp], %[addr]\n"
+		     "sub	%[tmp], %[tmp], %[old]\n"
+		     "cbnz	%[tmp], 3f\n"
+		     "2: stlxr	%w[ret], %[new], %[addr]\n"
+		     "3:\n"
+		     _ASM_EXTABLE_UACCESS_ERR(1b, 3b, %w[ret])
+		     _ASM_EXTABLE_UACCESS_ERR(2b, 3b, %w[ret])
+		     : [ret] "+r" (ret), [addr] "+Q" (*ptep), [tmp] "=&r" (tmp)
+		     : [old] "r" (old), [new] "r" (new)
+		     : "memory");
+
+	uaccess_disable_privileged();
+
+	/* STLXR didn't update the descriptor, or the compare failed */
+	if (ret == 1)
+		return -EAGAIN;
+
+	return ret;
+}
+
+int __kvm_at_swap_desc(struct kvm *kvm, gpa_t ipa, u64 old, u64 new)
+{
+	struct kvm_memory_slot *slot;
+	unsigned long hva;
+	u64 __user *ptep;
+	bool writable;
+	int offset;
+	gfn_t gfn;
+	int r;
+
+	lockdep_assert(srcu_read_lock_held(&kvm->srcu));
+
+	gfn = ipa >> PAGE_SHIFT;
+	offset = offset_in_page(ipa);
+	slot = gfn_to_memslot(kvm, gfn);
+	hva = gfn_to_hva_memslot_prot(slot, gfn, &writable);
+	if (kvm_is_error_hva(hva))
+		return -EINVAL;
+	if (!writable)
+		return -EPERM;
+
+	ptep = (u64 __user *)hva + offset;
+	if (cpus_have_final_cap(ARM64_HAS_LSE_ATOMICS))
+		r = __lse_swap_desc(ptep, old, new);
+	else
+		r = __llsc_swap_desc(ptep, old, new);
+
+	if (r < 0)
+		return r;
+
+	mark_page_dirty_in_slot(kvm, slot, gfn);
+	return 0;
 }
diff --git a/arch/arm64/kvm/config.c b/arch/arm64/kvm/config.c
new file mode 100644
index 000000000000..24bb3f36e9d5
--- /dev/null
+++ b/arch/arm64/kvm/config.c
@@ -0,0 +1,1520 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 Google LLC
+ * Author: Marc Zyngier <maz@kernel.org>
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_nested.h>
+#include <asm/sysreg.h>
+
+/*
+ * Describes the dependencies between a set of bits (or the negation
+ * of a set of RES0 bits) and a feature. The flags indicate how the
+ * data is interpreted.
+ */
+struct reg_bits_to_feat_map {
+	union {
+		u64	bits;
+		u64	*res0p;
+	};
+
+#define	NEVER_FGU	BIT(0)	/* Can trap, but never UNDEF */
+#define	CALL_FUNC	BIT(1)	/* Needs to evaluate tons of crap */
+#define	FIXED_VALUE	BIT(2)	/* RAZ/WI or RAO/WI in KVM */
+#define	RES0_POINTER	BIT(3)	/* Pointer to RES0 value instead of bits */
+
+	unsigned long	flags;
+
+	union {
+		struct {
+			u8	regidx;
+			u8	shift;
+			u8	width;
+			bool	sign;
+			s8	lo_lim;
+		};
+		bool	(*match)(struct kvm *);
+		bool	(*fval)(struct kvm *, u64 *);
+	};
+};
+
+/*
+ * Describes the dependencies for a given register:
+ *
+ * @feat_map describes the dependency for the whole register. If the
+ * features the register depends on are not present, the whole
+ * register is effectively RES0.
+ *
+ * @bit_feat_map describes the dependencies for a set of bits in that
+ * register. If the features these bits depend on are not present, the
+ * bits are effectively RES0.
+ */
+struct reg_feat_map_desc {
+	const char			  *name;
+	const struct reg_bits_to_feat_map feat_map;
+	const struct reg_bits_to_feat_map *bit_feat_map;
+	const unsigned int		  bit_feat_map_sz;
+};
+
+#define __NEEDS_FEAT_3(m, f, w, id, fld, lim)		\
+	{						\
+		.w	= (m),				\
+		.flags = (f),				\
+		.regidx	= IDREG_IDX(SYS_ ## id),	\
+		.shift	= id ##_## fld ## _SHIFT,	\
+		.width	= id ##_## fld ## _WIDTH,	\
+		.sign	= id ##_## fld ## _SIGNED,	\
+		.lo_lim	= id ##_## fld ##_## lim	\
+	}
+
+#define __NEEDS_FEAT_2(m, f, w, fun, dummy)		\
+	{						\
+		.w	= (m),				\
+		.flags = (f) | CALL_FUNC,		\
+		.fval = (fun),				\
+	}
+
+#define __NEEDS_FEAT_1(m, f, w, fun)			\
+	{						\
+		.w	= (m),				\
+		.flags = (f) | CALL_FUNC,		\
+		.match = (fun),				\
+	}
+
+#define __NEEDS_FEAT_FLAG(m, f, w, ...)			\
+	CONCATENATE(__NEEDS_FEAT_, COUNT_ARGS(__VA_ARGS__))(m, f, w, __VA_ARGS__)
+
+#define NEEDS_FEAT_FLAG(m, f, ...)			\
+	__NEEDS_FEAT_FLAG(m, f, bits, __VA_ARGS__)
+
+#define NEEDS_FEAT_FIXED(m, ...)			\
+	__NEEDS_FEAT_FLAG(m, FIXED_VALUE, bits, __VA_ARGS__, 0)
+
+#define NEEDS_FEAT_RES0(p, ...)				\
+	__NEEDS_FEAT_FLAG(p, RES0_POINTER, res0p, __VA_ARGS__)
+
+/*
+ * Declare the dependency between a set of bits and a set of features,
+ * generating a struct reg_bit_to_feat_map.
+ */
+#define NEEDS_FEAT(m, ...)	NEEDS_FEAT_FLAG(m, 0, __VA_ARGS__)
+
+/*
+ * Declare the dependency between a non-FGT register, a set of
+ * feature, and the set of individual bits it contains. This generates
+ * a struct reg_feat_map_desc.
+ */
+#define DECLARE_FEAT_MAP(n, r, m, f)					\
+	struct reg_feat_map_desc n = {					\
+		.name			= #r,				\
+		.feat_map		= NEEDS_FEAT(~r##_RES0, f), 	\
+		.bit_feat_map		= m,				\
+		.bit_feat_map_sz	= ARRAY_SIZE(m),		\
+	}
+
+/*
+ * Specialised version of the above for FGT registers that have their
+ * RES0 masks described as struct fgt_masks.
+ */
+#define DECLARE_FEAT_MAP_FGT(n, msk, m, f)				\
+	struct reg_feat_map_desc n = {					\
+		.name			= #msk,				\
+		.feat_map		= NEEDS_FEAT_RES0(&msk.res0, f),\
+		.bit_feat_map		= m,				\
+		.bit_feat_map_sz	= ARRAY_SIZE(m),		\
+	}
+
+#define FEAT_SPE		ID_AA64DFR0_EL1, PMSVer, IMP
+#define FEAT_SPE_FnE		ID_AA64DFR0_EL1, PMSVer, V1P2
+#define FEAT_BRBE		ID_AA64DFR0_EL1, BRBE, IMP
+#define FEAT_TRC_SR		ID_AA64DFR0_EL1, TraceVer, IMP
+#define FEAT_PMUv3		ID_AA64DFR0_EL1, PMUVer, IMP
+#define FEAT_TRBE		ID_AA64DFR0_EL1, TraceBuffer, IMP
+#define FEAT_TRBEv1p1		ID_AA64DFR0_EL1, TraceBuffer, TRBE_V1P1
+#define FEAT_DoubleLock		ID_AA64DFR0_EL1, DoubleLock, IMP
+#define FEAT_TRF		ID_AA64DFR0_EL1, TraceFilt, IMP
+#define FEAT_AA32EL0		ID_AA64PFR0_EL1, EL0, AARCH32
+#define FEAT_AA32EL1		ID_AA64PFR0_EL1, EL1, AARCH32
+#define FEAT_AA64EL1		ID_AA64PFR0_EL1, EL1, IMP
+#define FEAT_AA64EL2		ID_AA64PFR0_EL1, EL2, IMP
+#define FEAT_AA64EL3		ID_AA64PFR0_EL1, EL3, IMP
+#define FEAT_AIE		ID_AA64MMFR3_EL1, AIE, IMP
+#define FEAT_S2POE		ID_AA64MMFR3_EL1, S2POE, IMP
+#define FEAT_S1POE		ID_AA64MMFR3_EL1, S1POE, IMP
+#define FEAT_S1PIE		ID_AA64MMFR3_EL1, S1PIE, IMP
+#define FEAT_THE		ID_AA64PFR1_EL1, THE, IMP
+#define FEAT_SME		ID_AA64PFR1_EL1, SME, IMP
+#define FEAT_GCS		ID_AA64PFR1_EL1, GCS, IMP
+#define FEAT_LS64		ID_AA64ISAR1_EL1, LS64, LS64
+#define FEAT_LS64_V		ID_AA64ISAR1_EL1, LS64, LS64_V
+#define FEAT_LS64_ACCDATA	ID_AA64ISAR1_EL1, LS64, LS64_ACCDATA
+#define FEAT_RAS		ID_AA64PFR0_EL1, RAS, IMP
+#define FEAT_RASv2		ID_AA64PFR0_EL1, RAS, V2
+#define FEAT_GICv3		ID_AA64PFR0_EL1, GIC, IMP
+#define FEAT_LOR		ID_AA64MMFR1_EL1, LO, IMP
+#define FEAT_SPEv1p2		ID_AA64DFR0_EL1, PMSVer, V1P2
+#define FEAT_SPEv1p4		ID_AA64DFR0_EL1, PMSVer, V1P4
+#define FEAT_SPEv1p5		ID_AA64DFR0_EL1, PMSVer, V1P5
+#define FEAT_ATS1A		ID_AA64ISAR2_EL1, ATS1A, IMP
+#define FEAT_SPECRES2		ID_AA64ISAR1_EL1, SPECRES, COSP_RCTX
+#define FEAT_SPECRES		ID_AA64ISAR1_EL1, SPECRES, IMP
+#define FEAT_TLBIRANGE		ID_AA64ISAR0_EL1, TLB, RANGE
+#define FEAT_TLBIOS		ID_AA64ISAR0_EL1, TLB, OS
+#define FEAT_PAN2		ID_AA64MMFR1_EL1, PAN, PAN2
+#define FEAT_DPB2		ID_AA64ISAR1_EL1, DPB, DPB2
+#define FEAT_AMUv1		ID_AA64PFR0_EL1, AMU, IMP
+#define FEAT_AMUv1p1		ID_AA64PFR0_EL1, AMU, V1P1
+#define FEAT_CMOW		ID_AA64MMFR1_EL1, CMOW, IMP
+#define FEAT_D128		ID_AA64MMFR3_EL1, D128, IMP
+#define FEAT_DoubleFault2	ID_AA64PFR1_EL1, DF2, IMP
+#define FEAT_FPMR		ID_AA64PFR2_EL1, FPMR, IMP
+#define FEAT_MOPS		ID_AA64ISAR2_EL1, MOPS, IMP
+#define FEAT_NMI		ID_AA64PFR1_EL1, NMI, IMP
+#define FEAT_SCTLR2		ID_AA64MMFR3_EL1, SCTLRX, IMP
+#define FEAT_SYSREG128		ID_AA64ISAR2_EL1, SYSREG_128, IMP
+#define FEAT_TCR2		ID_AA64MMFR3_EL1, TCRX, IMP
+#define FEAT_XS			ID_AA64ISAR1_EL1, XS, IMP
+#define FEAT_EVT		ID_AA64MMFR2_EL1, EVT, IMP
+#define FEAT_EVT_TTLBxS		ID_AA64MMFR2_EL1, EVT, TTLBxS
+#define FEAT_MTE2		ID_AA64PFR1_EL1, MTE, MTE2
+#define FEAT_RME		ID_AA64PFR0_EL1, RME, IMP
+#define FEAT_MPAM		ID_AA64PFR0_EL1, MPAM, 1
+#define FEAT_S2FWB		ID_AA64MMFR2_EL1, FWB, IMP
+#define FEAT_TME		ID_AA64ISAR0_EL1, TME, IMP
+#define FEAT_TWED		ID_AA64MMFR1_EL1, TWED, IMP
+#define FEAT_E2H0		ID_AA64MMFR4_EL1, E2H0, IMP
+#define FEAT_SRMASK		ID_AA64MMFR4_EL1, SRMASK, IMP
+#define FEAT_PoPS		ID_AA64MMFR4_EL1, PoPS, IMP
+#define FEAT_PFAR		ID_AA64PFR1_EL1, PFAR, IMP
+#define FEAT_Debugv8p9		ID_AA64DFR0_EL1, PMUVer, V3P9
+#define FEAT_PMUv3_SS		ID_AA64DFR0_EL1, PMSS, IMP
+#define FEAT_SEBEP		ID_AA64DFR0_EL1, SEBEP, IMP
+#define FEAT_EBEP		ID_AA64DFR1_EL1, EBEP, IMP
+#define FEAT_ITE		ID_AA64DFR1_EL1, ITE, IMP
+#define FEAT_PMUv3_ICNTR	ID_AA64DFR1_EL1, PMICNTR, IMP
+#define FEAT_SPMU		ID_AA64DFR1_EL1, SPMU, IMP
+#define FEAT_SPE_nVM		ID_AA64DFR2_EL1, SPE_nVM, IMP
+#define FEAT_STEP2		ID_AA64DFR2_EL1, STEP, IMP
+#define FEAT_CPA2		ID_AA64ISAR3_EL1, CPA, CPA2
+#define FEAT_ASID2		ID_AA64MMFR4_EL1, ASID2, IMP
+#define FEAT_MEC		ID_AA64MMFR3_EL1, MEC, IMP
+#define FEAT_HAFT		ID_AA64MMFR1_EL1, HAFDBS, HAFT
+#define FEAT_BTI		ID_AA64PFR1_EL1, BT, IMP
+#define FEAT_ExS		ID_AA64MMFR0_EL1, EXS, IMP
+#define FEAT_IESB		ID_AA64MMFR2_EL1, IESB, IMP
+#define FEAT_LSE2		ID_AA64MMFR2_EL1, AT, IMP
+#define FEAT_LSMAOC		ID_AA64MMFR2_EL1, LSM, IMP
+#define FEAT_MixedEnd		ID_AA64MMFR0_EL1, BIGEND, IMP
+#define FEAT_MixedEndEL0	ID_AA64MMFR0_EL1, BIGENDEL0, IMP
+#define FEAT_MTE_ASYNC		ID_AA64PFR1_EL1, MTE_frac, ASYNC
+#define FEAT_MTE_STORE_ONLY	ID_AA64PFR2_EL1, MTESTOREONLY, IMP
+#define FEAT_PAN		ID_AA64MMFR1_EL1, PAN, IMP
+#define FEAT_PAN3		ID_AA64MMFR1_EL1, PAN, PAN3
+#define FEAT_SSBS		ID_AA64PFR1_EL1, SSBS, IMP
+#define FEAT_TIDCP1		ID_AA64MMFR1_EL1, TIDCP1, IMP
+#define FEAT_FGT		ID_AA64MMFR0_EL1, FGT, IMP
+#define FEAT_FGT2		ID_AA64MMFR0_EL1, FGT, FGT2
+#define FEAT_MTPMU		ID_AA64DFR0_EL1, MTPMU, IMP
+#define FEAT_HCX		ID_AA64MMFR1_EL1, HCX, IMP
+
+static bool not_feat_aa64el3(struct kvm *kvm)
+{
+	return !kvm_has_feat(kvm, FEAT_AA64EL3);
+}
+
+static bool feat_nv2(struct kvm *kvm)
+{
+	return ((kvm_has_feat(kvm, ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY) &&
+		 kvm_has_feat_enum(kvm, ID_AA64MMFR2_EL1, NV, NI)) ||
+		kvm_has_feat(kvm, ID_AA64MMFR2_EL1, NV, NV2));
+}
+
+static bool feat_nv2_e2h0_ni(struct kvm *kvm)
+{
+	return feat_nv2(kvm) && !kvm_has_feat(kvm, FEAT_E2H0);
+}
+
+static bool feat_rasv1p1(struct kvm *kvm)
+{
+	return (kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, V1P1) ||
+		(kvm_has_feat_enum(kvm, ID_AA64PFR0_EL1, RAS, IMP) &&
+		 kvm_has_feat(kvm, ID_AA64PFR1_EL1, RAS_frac, RASv1p1)));
+}
+
+static bool feat_csv2_2_csv2_1p2(struct kvm *kvm)
+{
+	return (kvm_has_feat(kvm,  ID_AA64PFR0_EL1, CSV2, CSV2_2) ||
+		(kvm_has_feat(kvm, ID_AA64PFR1_EL1, CSV2_frac, CSV2_1p2) &&
+		 kvm_has_feat_enum(kvm,  ID_AA64PFR0_EL1, CSV2, IMP)));
+}
+
+static bool feat_pauth(struct kvm *kvm)
+{
+	return kvm_has_pauth(kvm, PAuth);
+}
+
+static bool feat_pauth_lr(struct kvm *kvm)
+{
+	return kvm_has_pauth(kvm, PAuth_LR);
+}
+
+static bool feat_aderr(struct kvm *kvm)
+{
+	return (kvm_has_feat(kvm, ID_AA64MMFR3_EL1, ADERR, FEAT_ADERR) &&
+		kvm_has_feat(kvm, ID_AA64MMFR3_EL1, SDERR, FEAT_ADERR));
+}
+
+static bool feat_anerr(struct kvm *kvm)
+{
+	return (kvm_has_feat(kvm, ID_AA64MMFR3_EL1, ANERR, FEAT_ANERR) &&
+		kvm_has_feat(kvm, ID_AA64MMFR3_EL1, SNERR, FEAT_ANERR));
+}
+
+static bool feat_sme_smps(struct kvm *kvm)
+{
+	/*
+	 * Revists this if KVM ever supports SME -- this really should
+	 * look at the guest's view of SMIDR_EL1. Funnily enough, this
+	 * is not captured in the JSON file, but only as a note in the
+	 * ARM ARM.
+	 */
+	return (kvm_has_feat(kvm, FEAT_SME) &&
+		(read_sysreg_s(SYS_SMIDR_EL1) & SMIDR_EL1_SMPS));
+}
+
+static bool feat_spe_fds(struct kvm *kvm)
+{
+	/*
+	 * Revists this if KVM ever supports SPE -- this really should
+	 * look at the guest's view of PMSIDR_EL1.
+	 */
+	return (kvm_has_feat(kvm, FEAT_SPEv1p4) &&
+		(read_sysreg_s(SYS_PMSIDR_EL1) & PMSIDR_EL1_FDS));
+}
+
+static bool feat_trbe_mpam(struct kvm *kvm)
+{
+	/*
+	 * Revists this if KVM ever supports both MPAM and TRBE --
+	 * this really should look at the guest's view of TRBIDR_EL1.
+	 */
+	return (kvm_has_feat(kvm, FEAT_TRBE) &&
+		kvm_has_feat(kvm, FEAT_MPAM) &&
+		(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_EL1_MPAM));
+}
+
+static bool feat_asid2_e2h1(struct kvm *kvm)
+{
+	return kvm_has_feat(kvm, FEAT_ASID2) && !kvm_has_feat(kvm, FEAT_E2H0);
+}
+
+static bool feat_d128_e2h1(struct kvm *kvm)
+{
+	return kvm_has_feat(kvm, FEAT_D128) && !kvm_has_feat(kvm, FEAT_E2H0);
+}
+
+static bool feat_mec_e2h1(struct kvm *kvm)
+{
+	return kvm_has_feat(kvm, FEAT_MEC) && !kvm_has_feat(kvm, FEAT_E2H0);
+}
+
+static bool feat_ebep_pmuv3_ss(struct kvm *kvm)
+{
+	return kvm_has_feat(kvm, FEAT_EBEP) || kvm_has_feat(kvm, FEAT_PMUv3_SS);
+}
+
+static bool feat_mixedendel0(struct kvm *kvm)
+{
+	return kvm_has_feat(kvm, FEAT_MixedEnd) || kvm_has_feat(kvm, FEAT_MixedEndEL0);
+}
+
+static bool feat_mte_async(struct kvm *kvm)
+{
+	return kvm_has_feat(kvm, FEAT_MTE2) && kvm_has_feat_enum(kvm, FEAT_MTE_ASYNC);
+}
+
+#define check_pmu_revision(k, r)					\
+	({								\
+		(kvm_has_feat((k), ID_AA64DFR0_EL1, PMUVer, r) &&	\
+		 !kvm_has_feat((k), ID_AA64DFR0_EL1, PMUVer, IMP_DEF));	\
+	})
+
+static bool feat_pmuv3p1(struct kvm *kvm)
+{
+	return check_pmu_revision(kvm, V3P1);
+}
+
+static bool feat_pmuv3p5(struct kvm *kvm)
+{
+	return check_pmu_revision(kvm, V3P5);
+}
+
+static bool feat_pmuv3p7(struct kvm *kvm)
+{
+	return check_pmu_revision(kvm, V3P7);
+}
+
+static bool feat_pmuv3p9(struct kvm *kvm)
+{
+	return check_pmu_revision(kvm, V3P9);
+}
+
+static bool compute_hcr_rw(struct kvm *kvm, u64 *bits)
+{
+	/* This is purely academic: AArch32 and NV are mutually exclusive */
+	if (bits) {
+		if (kvm_has_feat(kvm, FEAT_AA32EL1))
+			*bits &= ~HCR_EL2_RW;
+		else
+			*bits |= HCR_EL2_RW;
+	}
+
+	return true;
+}
+
+static bool compute_hcr_e2h(struct kvm *kvm, u64 *bits)
+{
+	if (bits) {
+		if (kvm_has_feat(kvm, FEAT_E2H0))
+			*bits &= ~HCR_EL2_E2H;
+		else
+			*bits |= HCR_EL2_E2H;
+	}
+
+	return true;
+}
+
+static const struct reg_bits_to_feat_map hfgrtr_feat_map[] = {
+	NEEDS_FEAT(HFGRTR_EL2_nAMAIR2_EL1	|
+		   HFGRTR_EL2_nMAIR2_EL1,
+		   FEAT_AIE),
+	NEEDS_FEAT(HFGRTR_EL2_nS2POR_EL1, FEAT_S2POE),
+	NEEDS_FEAT(HFGRTR_EL2_nPOR_EL1		|
+		   HFGRTR_EL2_nPOR_EL0,
+		   FEAT_S1POE),
+	NEEDS_FEAT(HFGRTR_EL2_nPIR_EL1		|
+		   HFGRTR_EL2_nPIRE0_EL1,
+		   FEAT_S1PIE),
+	NEEDS_FEAT(HFGRTR_EL2_nRCWMASK_EL1, FEAT_THE),
+	NEEDS_FEAT(HFGRTR_EL2_nTPIDR2_EL0	|
+		   HFGRTR_EL2_nSMPRI_EL1,
+		   FEAT_SME),
+	NEEDS_FEAT(HFGRTR_EL2_nGCS_EL1		|
+		   HFGRTR_EL2_nGCS_EL0,
+		   FEAT_GCS),
+	NEEDS_FEAT(HFGRTR_EL2_nACCDATA_EL1, FEAT_LS64_ACCDATA),
+	NEEDS_FEAT(HFGRTR_EL2_ERXADDR_EL1	|
+		   HFGRTR_EL2_ERXMISCn_EL1	|
+		   HFGRTR_EL2_ERXSTATUS_EL1	|
+		   HFGRTR_EL2_ERXCTLR_EL1	|
+		   HFGRTR_EL2_ERXFR_EL1		|
+		   HFGRTR_EL2_ERRSELR_EL1	|
+		   HFGRTR_EL2_ERRIDR_EL1,
+		   FEAT_RAS),
+	NEEDS_FEAT(HFGRTR_EL2_ERXPFGCDN_EL1	|
+		   HFGRTR_EL2_ERXPFGCTL_EL1	|
+		   HFGRTR_EL2_ERXPFGF_EL1,
+		   feat_rasv1p1),
+	NEEDS_FEAT(HFGRTR_EL2_ICC_IGRPENn_EL1, FEAT_GICv3),
+	NEEDS_FEAT(HFGRTR_EL2_SCXTNUM_EL0	|
+		   HFGRTR_EL2_SCXTNUM_EL1,
+		   feat_csv2_2_csv2_1p2),
+	NEEDS_FEAT(HFGRTR_EL2_LORSA_EL1		|
+		   HFGRTR_EL2_LORN_EL1		|
+		   HFGRTR_EL2_LORID_EL1		|
+		   HFGRTR_EL2_LOREA_EL1		|
+		   HFGRTR_EL2_LORC_EL1,
+		   FEAT_LOR),
+	NEEDS_FEAT(HFGRTR_EL2_APIBKey		|
+		   HFGRTR_EL2_APIAKey		|
+		   HFGRTR_EL2_APGAKey		|
+		   HFGRTR_EL2_APDBKey		|
+		   HFGRTR_EL2_APDAKey,
+		   feat_pauth),
+	NEEDS_FEAT_FLAG(HFGRTR_EL2_VBAR_EL1	|
+			HFGRTR_EL2_TTBR1_EL1	|
+			HFGRTR_EL2_TTBR0_EL1	|
+			HFGRTR_EL2_TPIDR_EL0	|
+			HFGRTR_EL2_TPIDRRO_EL0	|
+			HFGRTR_EL2_TPIDR_EL1	|
+			HFGRTR_EL2_TCR_EL1	|
+			HFGRTR_EL2_SCTLR_EL1	|
+			HFGRTR_EL2_REVIDR_EL1	|
+			HFGRTR_EL2_PAR_EL1	|
+			HFGRTR_EL2_MPIDR_EL1	|
+			HFGRTR_EL2_MIDR_EL1	|
+			HFGRTR_EL2_MAIR_EL1	|
+			HFGRTR_EL2_ISR_EL1	|
+			HFGRTR_EL2_FAR_EL1	|
+			HFGRTR_EL2_ESR_EL1	|
+			HFGRTR_EL2_DCZID_EL0	|
+			HFGRTR_EL2_CTR_EL0	|
+			HFGRTR_EL2_CSSELR_EL1	|
+			HFGRTR_EL2_CPACR_EL1	|
+			HFGRTR_EL2_CONTEXTIDR_EL1|
+			HFGRTR_EL2_CLIDR_EL1	|
+			HFGRTR_EL2_CCSIDR_EL1	|
+			HFGRTR_EL2_AMAIR_EL1	|
+			HFGRTR_EL2_AIDR_EL1	|
+			HFGRTR_EL2_AFSR1_EL1	|
+			HFGRTR_EL2_AFSR0_EL1,
+			NEVER_FGU, FEAT_AA64EL1),
+};
+
+
+static const DECLARE_FEAT_MAP_FGT(hfgrtr_desc, hfgrtr_masks,
+				  hfgrtr_feat_map, FEAT_FGT);
+
+static const struct reg_bits_to_feat_map hfgwtr_feat_map[] = {
+	NEEDS_FEAT(HFGWTR_EL2_nAMAIR2_EL1	|
+		   HFGWTR_EL2_nMAIR2_EL1,
+		   FEAT_AIE),
+	NEEDS_FEAT(HFGWTR_EL2_nS2POR_EL1, FEAT_S2POE),
+	NEEDS_FEAT(HFGWTR_EL2_nPOR_EL1		|
+		   HFGWTR_EL2_nPOR_EL0,
+		   FEAT_S1POE),
+	NEEDS_FEAT(HFGWTR_EL2_nPIR_EL1		|
+		   HFGWTR_EL2_nPIRE0_EL1,
+		   FEAT_S1PIE),
+	NEEDS_FEAT(HFGWTR_EL2_nRCWMASK_EL1, FEAT_THE),
+	NEEDS_FEAT(HFGWTR_EL2_nTPIDR2_EL0	|
+		   HFGWTR_EL2_nSMPRI_EL1,
+		   FEAT_SME),
+	NEEDS_FEAT(HFGWTR_EL2_nGCS_EL1		|
+		   HFGWTR_EL2_nGCS_EL0,
+		   FEAT_GCS),
+	NEEDS_FEAT(HFGWTR_EL2_nACCDATA_EL1, FEAT_LS64_ACCDATA),
+	NEEDS_FEAT(HFGWTR_EL2_ERXADDR_EL1	|
+		   HFGWTR_EL2_ERXMISCn_EL1	|
+		   HFGWTR_EL2_ERXSTATUS_EL1	|
+		   HFGWTR_EL2_ERXCTLR_EL1	|
+		   HFGWTR_EL2_ERRSELR_EL1,
+		   FEAT_RAS),
+	NEEDS_FEAT(HFGWTR_EL2_ERXPFGCDN_EL1	|
+		   HFGWTR_EL2_ERXPFGCTL_EL1,
+		   feat_rasv1p1),
+	NEEDS_FEAT(HFGWTR_EL2_ICC_IGRPENn_EL1, FEAT_GICv3),
+	NEEDS_FEAT(HFGWTR_EL2_SCXTNUM_EL0	|
+		   HFGWTR_EL2_SCXTNUM_EL1,
+		   feat_csv2_2_csv2_1p2),
+	NEEDS_FEAT(HFGWTR_EL2_LORSA_EL1		|
+		   HFGWTR_EL2_LORN_EL1		|
+		   HFGWTR_EL2_LOREA_EL1		|
+		   HFGWTR_EL2_LORC_EL1,
+		   FEAT_LOR),
+	NEEDS_FEAT(HFGWTR_EL2_APIBKey		|
+		   HFGWTR_EL2_APIAKey		|
+		   HFGWTR_EL2_APGAKey		|
+		   HFGWTR_EL2_APDBKey		|
+		   HFGWTR_EL2_APDAKey,
+		   feat_pauth),
+	NEEDS_FEAT_FLAG(HFGWTR_EL2_VBAR_EL1	|
+			HFGWTR_EL2_TTBR1_EL1	|
+			HFGWTR_EL2_TTBR0_EL1	|
+			HFGWTR_EL2_TPIDR_EL0	|
+			HFGWTR_EL2_TPIDRRO_EL0	|
+			HFGWTR_EL2_TPIDR_EL1	|
+			HFGWTR_EL2_TCR_EL1	|
+			HFGWTR_EL2_SCTLR_EL1	|
+			HFGWTR_EL2_PAR_EL1	|
+			HFGWTR_EL2_MAIR_EL1	|
+			HFGWTR_EL2_FAR_EL1	|
+			HFGWTR_EL2_ESR_EL1	|
+			HFGWTR_EL2_CSSELR_EL1	|
+			HFGWTR_EL2_CPACR_EL1	|
+			HFGWTR_EL2_CONTEXTIDR_EL1|
+			HFGWTR_EL2_AMAIR_EL1	|
+			HFGWTR_EL2_AFSR1_EL1	|
+			HFGWTR_EL2_AFSR0_EL1,
+			NEVER_FGU, FEAT_AA64EL1),
+};
+
+static const DECLARE_FEAT_MAP_FGT(hfgwtr_desc, hfgwtr_masks,
+				  hfgwtr_feat_map, FEAT_FGT);
+
+static const struct reg_bits_to_feat_map hdfgrtr_feat_map[] = {
+	NEEDS_FEAT(HDFGRTR_EL2_PMBIDR_EL1	|
+		   HDFGRTR_EL2_PMSLATFR_EL1	|
+		   HDFGRTR_EL2_PMSIRR_EL1	|
+		   HDFGRTR_EL2_PMSIDR_EL1	|
+		   HDFGRTR_EL2_PMSICR_EL1	|
+		   HDFGRTR_EL2_PMSFCR_EL1	|
+		   HDFGRTR_EL2_PMSEVFR_EL1	|
+		   HDFGRTR_EL2_PMSCR_EL1	|
+		   HDFGRTR_EL2_PMBSR_EL1	|
+		   HDFGRTR_EL2_PMBPTR_EL1	|
+		   HDFGRTR_EL2_PMBLIMITR_EL1,
+		   FEAT_SPE),
+	NEEDS_FEAT(HDFGRTR_EL2_nPMSNEVFR_EL1, FEAT_SPE_FnE),
+	NEEDS_FEAT(HDFGRTR_EL2_nBRBDATA		|
+		   HDFGRTR_EL2_nBRBCTL		|
+		   HDFGRTR_EL2_nBRBIDR,
+		   FEAT_BRBE),
+	NEEDS_FEAT(HDFGRTR_EL2_TRCVICTLR	|
+		   HDFGRTR_EL2_TRCSTATR		|
+		   HDFGRTR_EL2_TRCSSCSRn	|
+		   HDFGRTR_EL2_TRCSEQSTR	|
+		   HDFGRTR_EL2_TRCPRGCTLR	|
+		   HDFGRTR_EL2_TRCOSLSR		|
+		   HDFGRTR_EL2_TRCIMSPECn	|
+		   HDFGRTR_EL2_TRCID		|
+		   HDFGRTR_EL2_TRCCNTVRn	|
+		   HDFGRTR_EL2_TRCCLAIM		|
+		   HDFGRTR_EL2_TRCAUXCTLR	|
+		   HDFGRTR_EL2_TRCAUTHSTATUS	|
+		   HDFGRTR_EL2_TRC,
+		   FEAT_TRC_SR),
+	NEEDS_FEAT(HDFGRTR_EL2_PMCEIDn_EL0	|
+		   HDFGRTR_EL2_PMUSERENR_EL0	|
+		   HDFGRTR_EL2_PMMIR_EL1	|
+		   HDFGRTR_EL2_PMSELR_EL0	|
+		   HDFGRTR_EL2_PMOVS		|
+		   HDFGRTR_EL2_PMINTEN		|
+		   HDFGRTR_EL2_PMCNTEN		|
+		   HDFGRTR_EL2_PMCCNTR_EL0	|
+		   HDFGRTR_EL2_PMCCFILTR_EL0	|
+		   HDFGRTR_EL2_PMEVTYPERn_EL0	|
+		   HDFGRTR_EL2_PMEVCNTRn_EL0,
+		   FEAT_PMUv3),
+	NEEDS_FEAT(HDFGRTR_EL2_TRBTRG_EL1	|
+		   HDFGRTR_EL2_TRBSR_EL1	|
+		   HDFGRTR_EL2_TRBPTR_EL1	|
+		   HDFGRTR_EL2_TRBMAR_EL1	|
+		   HDFGRTR_EL2_TRBLIMITR_EL1	|
+		   HDFGRTR_EL2_TRBIDR_EL1	|
+		   HDFGRTR_EL2_TRBBASER_EL1,
+		   FEAT_TRBE),
+	NEEDS_FEAT_FLAG(HDFGRTR_EL2_OSDLR_EL1, NEVER_FGU,
+			FEAT_DoubleLock),
+	NEEDS_FEAT_FLAG(HDFGRTR_EL2_OSECCR_EL1	|
+			HDFGRTR_EL2_OSLSR_EL1	|
+			HDFGRTR_EL2_DBGPRCR_EL1	|
+			HDFGRTR_EL2_DBGAUTHSTATUS_EL1|
+			HDFGRTR_EL2_DBGCLAIM	|
+			HDFGRTR_EL2_MDSCR_EL1	|
+			HDFGRTR_EL2_DBGWVRn_EL1	|
+			HDFGRTR_EL2_DBGWCRn_EL1	|
+			HDFGRTR_EL2_DBGBVRn_EL1	|
+			HDFGRTR_EL2_DBGBCRn_EL1,
+			NEVER_FGU, FEAT_AA64EL1)
+};
+
+static const DECLARE_FEAT_MAP_FGT(hdfgrtr_desc, hdfgrtr_masks,
+				  hdfgrtr_feat_map, FEAT_FGT);
+
+static const struct reg_bits_to_feat_map hdfgwtr_feat_map[] = {
+	NEEDS_FEAT(HDFGWTR_EL2_PMSLATFR_EL1	|
+		   HDFGWTR_EL2_PMSIRR_EL1	|
+		   HDFGWTR_EL2_PMSICR_EL1	|
+		   HDFGWTR_EL2_PMSFCR_EL1	|
+		   HDFGWTR_EL2_PMSEVFR_EL1	|
+		   HDFGWTR_EL2_PMSCR_EL1	|
+		   HDFGWTR_EL2_PMBSR_EL1	|
+		   HDFGWTR_EL2_PMBPTR_EL1	|
+		   HDFGWTR_EL2_PMBLIMITR_EL1,
+		   FEAT_SPE),
+	NEEDS_FEAT(HDFGWTR_EL2_nPMSNEVFR_EL1, FEAT_SPE_FnE),
+	NEEDS_FEAT(HDFGWTR_EL2_nBRBDATA		|
+		   HDFGWTR_EL2_nBRBCTL,
+		   FEAT_BRBE),
+	NEEDS_FEAT(HDFGWTR_EL2_TRCVICTLR	|
+		   HDFGWTR_EL2_TRCSSCSRn	|
+		   HDFGWTR_EL2_TRCSEQSTR	|
+		   HDFGWTR_EL2_TRCPRGCTLR	|
+		   HDFGWTR_EL2_TRCOSLAR		|
+		   HDFGWTR_EL2_TRCIMSPECn	|
+		   HDFGWTR_EL2_TRCCNTVRn	|
+		   HDFGWTR_EL2_TRCCLAIM		|
+		   HDFGWTR_EL2_TRCAUXCTLR	|
+		   HDFGWTR_EL2_TRC,
+		   FEAT_TRC_SR),
+	NEEDS_FEAT(HDFGWTR_EL2_PMUSERENR_EL0	|
+		   HDFGWTR_EL2_PMCR_EL0		|
+		   HDFGWTR_EL2_PMSWINC_EL0	|
+		   HDFGWTR_EL2_PMSELR_EL0	|
+		   HDFGWTR_EL2_PMOVS		|
+		   HDFGWTR_EL2_PMINTEN		|
+		   HDFGWTR_EL2_PMCNTEN		|
+		   HDFGWTR_EL2_PMCCNTR_EL0	|
+		   HDFGWTR_EL2_PMCCFILTR_EL0	|
+		   HDFGWTR_EL2_PMEVTYPERn_EL0	|
+		   HDFGWTR_EL2_PMEVCNTRn_EL0,
+		   FEAT_PMUv3),
+	NEEDS_FEAT(HDFGWTR_EL2_TRBTRG_EL1	|
+		   HDFGWTR_EL2_TRBSR_EL1	|
+		   HDFGWTR_EL2_TRBPTR_EL1	|
+		   HDFGWTR_EL2_TRBMAR_EL1	|
+		   HDFGWTR_EL2_TRBLIMITR_EL1	|
+		   HDFGWTR_EL2_TRBBASER_EL1,
+		   FEAT_TRBE),
+	NEEDS_FEAT_FLAG(HDFGWTR_EL2_OSDLR_EL1,
+			NEVER_FGU, FEAT_DoubleLock),
+	NEEDS_FEAT_FLAG(HDFGWTR_EL2_OSECCR_EL1	|
+			HDFGWTR_EL2_OSLAR_EL1	|
+			HDFGWTR_EL2_DBGPRCR_EL1	|
+			HDFGWTR_EL2_DBGCLAIM	|
+			HDFGWTR_EL2_MDSCR_EL1	|
+			HDFGWTR_EL2_DBGWVRn_EL1	|
+			HDFGWTR_EL2_DBGWCRn_EL1	|
+			HDFGWTR_EL2_DBGBVRn_EL1	|
+			HDFGWTR_EL2_DBGBCRn_EL1,
+			NEVER_FGU, FEAT_AA64EL1),
+	NEEDS_FEAT(HDFGWTR_EL2_TRFCR_EL1, FEAT_TRF),
+};
+
+static const DECLARE_FEAT_MAP_FGT(hdfgwtr_desc, hdfgwtr_masks,
+				  hdfgwtr_feat_map, FEAT_FGT);
+
+static const struct reg_bits_to_feat_map hfgitr_feat_map[] = {
+	NEEDS_FEAT(HFGITR_EL2_PSBCSYNC, FEAT_SPEv1p5),
+	NEEDS_FEAT(HFGITR_EL2_ATS1E1A, FEAT_ATS1A),
+	NEEDS_FEAT(HFGITR_EL2_COSPRCTX, FEAT_SPECRES2),
+	NEEDS_FEAT(HFGITR_EL2_nGCSEPP		|
+		   HFGITR_EL2_nGCSSTR_EL1	|
+		   HFGITR_EL2_nGCSPUSHM_EL1,
+		   FEAT_GCS),
+	NEEDS_FEAT(HFGITR_EL2_nBRBIALL		|
+		   HFGITR_EL2_nBRBINJ,
+		   FEAT_BRBE),
+	NEEDS_FEAT(HFGITR_EL2_CPPRCTX		|
+		   HFGITR_EL2_DVPRCTX		|
+		   HFGITR_EL2_CFPRCTX,
+		   FEAT_SPECRES),
+	NEEDS_FEAT(HFGITR_EL2_TLBIRVAALE1	|
+		   HFGITR_EL2_TLBIRVALE1	|
+		   HFGITR_EL2_TLBIRVAAE1	|
+		   HFGITR_EL2_TLBIRVAE1		|
+		   HFGITR_EL2_TLBIRVAALE1IS	|
+		   HFGITR_EL2_TLBIRVALE1IS	|
+		   HFGITR_EL2_TLBIRVAAE1IS	|
+		   HFGITR_EL2_TLBIRVAE1IS	|
+		   HFGITR_EL2_TLBIRVAALE1OS	|
+		   HFGITR_EL2_TLBIRVALE1OS	|
+		   HFGITR_EL2_TLBIRVAAE1OS	|
+		   HFGITR_EL2_TLBIRVAE1OS,
+		   FEAT_TLBIRANGE),
+	NEEDS_FEAT(HFGITR_EL2_TLBIVAALE1OS	|
+		   HFGITR_EL2_TLBIVALE1OS	|
+		   HFGITR_EL2_TLBIVAAE1OS	|
+		   HFGITR_EL2_TLBIASIDE1OS	|
+		   HFGITR_EL2_TLBIVAE1OS	|
+		   HFGITR_EL2_TLBIVMALLE1OS,
+		   FEAT_TLBIOS),
+	NEEDS_FEAT(HFGITR_EL2_ATS1E1WP		|
+		   HFGITR_EL2_ATS1E1RP,
+		   FEAT_PAN2),
+	NEEDS_FEAT(HFGITR_EL2_DCCVADP, FEAT_DPB2),
+	NEEDS_FEAT_FLAG(HFGITR_EL2_DCCVAC	|
+			HFGITR_EL2_SVC_EL1	|
+			HFGITR_EL2_SVC_EL0	|
+			HFGITR_EL2_ERET		|
+			HFGITR_EL2_TLBIVAALE1	|
+			HFGITR_EL2_TLBIVALE1	|
+			HFGITR_EL2_TLBIVAAE1	|
+			HFGITR_EL2_TLBIASIDE1	|
+			HFGITR_EL2_TLBIVAE1	|
+			HFGITR_EL2_TLBIVMALLE1	|
+			HFGITR_EL2_TLBIVAALE1IS	|
+			HFGITR_EL2_TLBIVALE1IS	|
+			HFGITR_EL2_TLBIVAAE1IS	|
+			HFGITR_EL2_TLBIASIDE1IS	|
+			HFGITR_EL2_TLBIVAE1IS	|
+			HFGITR_EL2_TLBIVMALLE1IS|
+			HFGITR_EL2_ATS1E0W	|
+			HFGITR_EL2_ATS1E0R	|
+			HFGITR_EL2_ATS1E1W	|
+			HFGITR_EL2_ATS1E1R	|
+			HFGITR_EL2_DCZVA	|
+			HFGITR_EL2_DCCIVAC	|
+			HFGITR_EL2_DCCVAP	|
+			HFGITR_EL2_DCCVAU	|
+			HFGITR_EL2_DCCISW	|
+			HFGITR_EL2_DCCSW	|
+			HFGITR_EL2_DCISW	|
+			HFGITR_EL2_DCIVAC	|
+			HFGITR_EL2_ICIVAU	|
+			HFGITR_EL2_ICIALLU	|
+			HFGITR_EL2_ICIALLUIS,
+			NEVER_FGU, FEAT_AA64EL1),
+};
+
+static const DECLARE_FEAT_MAP_FGT(hfgitr_desc, hfgitr_masks,
+				  hfgitr_feat_map, FEAT_FGT);
+
+static const struct reg_bits_to_feat_map hafgrtr_feat_map[] = {
+	NEEDS_FEAT(HAFGRTR_EL2_AMEVTYPER115_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER114_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER113_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER112_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER111_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER110_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER19_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER18_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER17_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER16_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER15_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER14_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER13_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER12_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER11_EL0	|
+		   HAFGRTR_EL2_AMEVTYPER10_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR115_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR114_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR113_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR112_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR111_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR110_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR19_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR18_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR17_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR16_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR15_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR14_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR13_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR12_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR11_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR10_EL0	|
+		   HAFGRTR_EL2_AMCNTEN1		|
+		   HAFGRTR_EL2_AMCNTEN0		|
+		   HAFGRTR_EL2_AMEVCNTR03_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR02_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR01_EL0	|
+		   HAFGRTR_EL2_AMEVCNTR00_EL0,
+		   FEAT_AMUv1),
+};
+
+static const DECLARE_FEAT_MAP_FGT(hafgrtr_desc, hafgrtr_masks,
+				  hafgrtr_feat_map, FEAT_FGT);
+
+static const struct reg_bits_to_feat_map hfgitr2_feat_map[] = {
+	NEEDS_FEAT(HFGITR2_EL2_nDCCIVAPS, FEAT_PoPS),
+	NEEDS_FEAT(HFGITR2_EL2_TSBCSYNC, FEAT_TRBEv1p1)
+};
+
+static const DECLARE_FEAT_MAP_FGT(hfgitr2_desc, hfgitr2_masks,
+				  hfgitr2_feat_map, FEAT_FGT2);
+
+static const struct reg_bits_to_feat_map hfgrtr2_feat_map[] = {
+	NEEDS_FEAT(HFGRTR2_EL2_nPFAR_EL1, FEAT_PFAR),
+	NEEDS_FEAT(HFGRTR2_EL2_nERXGSR_EL1, FEAT_RASv2),
+	NEEDS_FEAT(HFGRTR2_EL2_nACTLRALIAS_EL1	|
+		   HFGRTR2_EL2_nACTLRMASK_EL1	|
+		   HFGRTR2_EL2_nCPACRALIAS_EL1	|
+		   HFGRTR2_EL2_nCPACRMASK_EL1	|
+		   HFGRTR2_EL2_nSCTLR2MASK_EL1	|
+		   HFGRTR2_EL2_nSCTLRALIAS2_EL1	|
+		   HFGRTR2_EL2_nSCTLRALIAS_EL1	|
+		   HFGRTR2_EL2_nSCTLRMASK_EL1	|
+		   HFGRTR2_EL2_nTCR2ALIAS_EL1	|
+		   HFGRTR2_EL2_nTCR2MASK_EL1	|
+		   HFGRTR2_EL2_nTCRALIAS_EL1	|
+		   HFGRTR2_EL2_nTCRMASK_EL1,
+		   FEAT_SRMASK),
+	NEEDS_FEAT(HFGRTR2_EL2_nRCWSMASK_EL1, FEAT_THE),
+};
+
+static const DECLARE_FEAT_MAP_FGT(hfgrtr2_desc, hfgrtr2_masks,
+				  hfgrtr2_feat_map, FEAT_FGT2);
+
+static const struct reg_bits_to_feat_map hfgwtr2_feat_map[] = {
+	NEEDS_FEAT(HFGWTR2_EL2_nPFAR_EL1, FEAT_PFAR),
+	NEEDS_FEAT(HFGWTR2_EL2_nACTLRALIAS_EL1	|
+		   HFGWTR2_EL2_nACTLRMASK_EL1	|
+		   HFGWTR2_EL2_nCPACRALIAS_EL1	|
+		   HFGWTR2_EL2_nCPACRMASK_EL1	|
+		   HFGWTR2_EL2_nSCTLR2MASK_EL1	|
+		   HFGWTR2_EL2_nSCTLRALIAS2_EL1	|
+		   HFGWTR2_EL2_nSCTLRALIAS_EL1	|
+		   HFGWTR2_EL2_nSCTLRMASK_EL1	|
+		   HFGWTR2_EL2_nTCR2ALIAS_EL1	|
+		   HFGWTR2_EL2_nTCR2MASK_EL1	|
+		   HFGWTR2_EL2_nTCRALIAS_EL1	|
+		   HFGWTR2_EL2_nTCRMASK_EL1,
+		   FEAT_SRMASK),
+	NEEDS_FEAT(HFGWTR2_EL2_nRCWSMASK_EL1, FEAT_THE),
+};
+
+static const DECLARE_FEAT_MAP_FGT(hfgwtr2_desc, hfgwtr2_masks,
+				  hfgwtr2_feat_map, FEAT_FGT2);
+
+static const struct reg_bits_to_feat_map hdfgrtr2_feat_map[] = {
+	NEEDS_FEAT(HDFGRTR2_EL2_nMDSELR_EL1, FEAT_Debugv8p9),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMECR_EL1, feat_ebep_pmuv3_ss),
+	NEEDS_FEAT(HDFGRTR2_EL2_nTRCITECR_EL1, FEAT_ITE),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMICFILTR_EL0	|
+		   HDFGRTR2_EL2_nPMICNTR_EL0,
+		   FEAT_PMUv3_ICNTR),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMUACR_EL1, feat_pmuv3p9),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMSSCR_EL1	|
+		   HDFGRTR2_EL2_nPMSSDATA,
+		   FEAT_PMUv3_SS),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMIAR_EL1, FEAT_SEBEP),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMSDSFR_EL1, feat_spe_fds),
+	NEEDS_FEAT(HDFGRTR2_EL2_nPMBMAR_EL1, FEAT_SPE_nVM),
+	NEEDS_FEAT(HDFGRTR2_EL2_nSPMACCESSR_EL1	|
+		   HDFGRTR2_EL2_nSPMCNTEN	|
+		   HDFGRTR2_EL2_nSPMCR_EL0	|
+		   HDFGRTR2_EL2_nSPMDEVAFF_EL1	|
+		   HDFGRTR2_EL2_nSPMEVCNTRn_EL0	|
+		   HDFGRTR2_EL2_nSPMEVTYPERn_EL0|
+		   HDFGRTR2_EL2_nSPMID		|
+		   HDFGRTR2_EL2_nSPMINTEN	|
+		   HDFGRTR2_EL2_nSPMOVS		|
+		   HDFGRTR2_EL2_nSPMSCR_EL1	|
+		   HDFGRTR2_EL2_nSPMSELR_EL0,
+		   FEAT_SPMU),
+	NEEDS_FEAT(HDFGRTR2_EL2_nMDSTEPOP_EL1, FEAT_STEP2),
+	NEEDS_FEAT(HDFGRTR2_EL2_nTRBMPAM_EL1, feat_trbe_mpam),
+};
+
+static const DECLARE_FEAT_MAP_FGT(hdfgrtr2_desc, hdfgrtr2_masks,
+				  hdfgrtr2_feat_map, FEAT_FGT2);
+
+static const struct reg_bits_to_feat_map hdfgwtr2_feat_map[] = {
+	NEEDS_FEAT(HDFGWTR2_EL2_nMDSELR_EL1, FEAT_Debugv8p9),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMECR_EL1, feat_ebep_pmuv3_ss),
+	NEEDS_FEAT(HDFGWTR2_EL2_nTRCITECR_EL1, FEAT_ITE),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMICFILTR_EL0	|
+		   HDFGWTR2_EL2_nPMICNTR_EL0,
+		   FEAT_PMUv3_ICNTR),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMUACR_EL1	|
+		   HDFGWTR2_EL2_nPMZR_EL0,
+		   feat_pmuv3p9),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMSSCR_EL1, FEAT_PMUv3_SS),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMIAR_EL1, FEAT_SEBEP),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMSDSFR_EL1, feat_spe_fds),
+	NEEDS_FEAT(HDFGWTR2_EL2_nPMBMAR_EL1, FEAT_SPE_nVM),
+	NEEDS_FEAT(HDFGWTR2_EL2_nSPMACCESSR_EL1	|
+		   HDFGWTR2_EL2_nSPMCNTEN	|
+		   HDFGWTR2_EL2_nSPMCR_EL0	|
+		   HDFGWTR2_EL2_nSPMEVCNTRn_EL0	|
+		   HDFGWTR2_EL2_nSPMEVTYPERn_EL0|
+		   HDFGWTR2_EL2_nSPMINTEN	|
+		   HDFGWTR2_EL2_nSPMOVS		|
+		   HDFGWTR2_EL2_nSPMSCR_EL1	|
+		   HDFGWTR2_EL2_nSPMSELR_EL0,
+		   FEAT_SPMU),
+	NEEDS_FEAT(HDFGWTR2_EL2_nMDSTEPOP_EL1, FEAT_STEP2),
+	NEEDS_FEAT(HDFGWTR2_EL2_nTRBMPAM_EL1, feat_trbe_mpam),
+};
+
+static const DECLARE_FEAT_MAP_FGT(hdfgwtr2_desc, hdfgwtr2_masks,
+				  hdfgwtr2_feat_map, FEAT_FGT2);
+
+
+static const struct reg_bits_to_feat_map hcrx_feat_map[] = {
+	NEEDS_FEAT(HCRX_EL2_PACMEn, feat_pauth_lr),
+	NEEDS_FEAT(HCRX_EL2_EnFPM, FEAT_FPMR),
+	NEEDS_FEAT(HCRX_EL2_GCSEn, FEAT_GCS),
+	NEEDS_FEAT(HCRX_EL2_EnIDCP128, FEAT_SYSREG128),
+	NEEDS_FEAT(HCRX_EL2_EnSDERR, feat_aderr),
+	NEEDS_FEAT(HCRX_EL2_TMEA, FEAT_DoubleFault2),
+	NEEDS_FEAT(HCRX_EL2_EnSNERR, feat_anerr),
+	NEEDS_FEAT(HCRX_EL2_D128En, FEAT_D128),
+	NEEDS_FEAT(HCRX_EL2_PTTWI, FEAT_THE),
+	NEEDS_FEAT(HCRX_EL2_SCTLR2En, FEAT_SCTLR2),
+	NEEDS_FEAT(HCRX_EL2_TCR2En, FEAT_TCR2),
+	NEEDS_FEAT(HCRX_EL2_MSCEn		|
+		   HCRX_EL2_MCE2,
+		   FEAT_MOPS),
+	NEEDS_FEAT(HCRX_EL2_CMOW, FEAT_CMOW),
+	NEEDS_FEAT(HCRX_EL2_VFNMI		|
+		   HCRX_EL2_VINMI		|
+		   HCRX_EL2_TALLINT,
+		   FEAT_NMI),
+	NEEDS_FEAT(HCRX_EL2_SMPME, feat_sme_smps),
+	NEEDS_FEAT(HCRX_EL2_FGTnXS		|
+		   HCRX_EL2_FnXS,
+		   FEAT_XS),
+	NEEDS_FEAT(HCRX_EL2_EnASR, FEAT_LS64_V),
+	NEEDS_FEAT(HCRX_EL2_EnALS, FEAT_LS64),
+	NEEDS_FEAT(HCRX_EL2_EnAS0, FEAT_LS64_ACCDATA),
+};
+
+
+static const DECLARE_FEAT_MAP(hcrx_desc, __HCRX_EL2,
+			      hcrx_feat_map, FEAT_HCX);
+
+static const struct reg_bits_to_feat_map hcr_feat_map[] = {
+	NEEDS_FEAT(HCR_EL2_TID0, FEAT_AA32EL0),
+	NEEDS_FEAT_FIXED(HCR_EL2_RW, compute_hcr_rw),
+	NEEDS_FEAT(HCR_EL2_HCD, not_feat_aa64el3),
+	NEEDS_FEAT(HCR_EL2_AMO		|
+		   HCR_EL2_BSU		|
+		   HCR_EL2_CD		|
+		   HCR_EL2_DC		|
+		   HCR_EL2_FB		|
+		   HCR_EL2_FMO		|
+		   HCR_EL2_ID		|
+		   HCR_EL2_IMO		|
+		   HCR_EL2_MIOCNCE	|
+		   HCR_EL2_PTW		|
+		   HCR_EL2_SWIO		|
+		   HCR_EL2_TACR		|
+		   HCR_EL2_TDZ		|
+		   HCR_EL2_TGE		|
+		   HCR_EL2_TID1		|
+		   HCR_EL2_TID2		|
+		   HCR_EL2_TID3		|
+		   HCR_EL2_TIDCP	|
+		   HCR_EL2_TPCP		|
+		   HCR_EL2_TPU		|
+		   HCR_EL2_TRVM		|
+		   HCR_EL2_TSC		|
+		   HCR_EL2_TSW		|
+		   HCR_EL2_TTLB		|
+		   HCR_EL2_TVM		|
+		   HCR_EL2_TWE		|
+		   HCR_EL2_TWI		|
+		   HCR_EL2_VF		|
+		   HCR_EL2_VI		|
+		   HCR_EL2_VM		|
+		   HCR_EL2_VSE,
+		   FEAT_AA64EL1),
+	NEEDS_FEAT(HCR_EL2_AMVOFFEN, FEAT_AMUv1p1),
+	NEEDS_FEAT(HCR_EL2_EnSCXT, feat_csv2_2_csv2_1p2),
+	NEEDS_FEAT(HCR_EL2_TICAB	|
+		   HCR_EL2_TID4		|
+		   HCR_EL2_TOCU,
+		   FEAT_EVT),
+	NEEDS_FEAT(HCR_EL2_TTLBIS	|
+		   HCR_EL2_TTLBOS,
+		   FEAT_EVT_TTLBxS),
+	NEEDS_FEAT(HCR_EL2_TLOR, FEAT_LOR),
+	NEEDS_FEAT(HCR_EL2_ATA		|
+		   HCR_EL2_DCT		|
+		   HCR_EL2_TID5,
+		   FEAT_MTE2),
+	NEEDS_FEAT(HCR_EL2_AT		| /* Ignore the original FEAT_NV */
+		   HCR_EL2_NV2		|
+		   HCR_EL2_NV,
+		   feat_nv2),
+	NEEDS_FEAT(HCR_EL2_NV1, feat_nv2_e2h0_ni), /* Missing from JSON */
+	NEEDS_FEAT(HCR_EL2_API		|
+		   HCR_EL2_APK,
+		   feat_pauth),
+	NEEDS_FEAT(HCR_EL2_TEA		|
+		   HCR_EL2_TERR,
+		   FEAT_RAS),
+	NEEDS_FEAT(HCR_EL2_FIEN, feat_rasv1p1),
+	NEEDS_FEAT(HCR_EL2_GPF, FEAT_RME),
+	NEEDS_FEAT(HCR_EL2_FWB, FEAT_S2FWB),
+	NEEDS_FEAT(HCR_EL2_TME, FEAT_TME),
+	NEEDS_FEAT(HCR_EL2_TWEDEL	|
+		   HCR_EL2_TWEDEn,
+		   FEAT_TWED),
+	NEEDS_FEAT_FIXED(HCR_EL2_E2H, compute_hcr_e2h),
+};
+
+static const DECLARE_FEAT_MAP(hcr_desc, HCR_EL2,
+			      hcr_feat_map, FEAT_AA64EL2);
+
+static const struct reg_bits_to_feat_map sctlr2_feat_map[] = {
+	NEEDS_FEAT(SCTLR2_EL1_NMEA	|
+		   SCTLR2_EL1_EASE,
+		   FEAT_DoubleFault2),
+	NEEDS_FEAT(SCTLR2_EL1_EnADERR, feat_aderr),
+	NEEDS_FEAT(SCTLR2_EL1_EnANERR, feat_anerr),
+	NEEDS_FEAT(SCTLR2_EL1_EnIDCP128, FEAT_SYSREG128),
+	NEEDS_FEAT(SCTLR2_EL1_EnPACM	|
+		   SCTLR2_EL1_EnPACM0,
+		   feat_pauth_lr),
+	NEEDS_FEAT(SCTLR2_EL1_CPTA	|
+		   SCTLR2_EL1_CPTA0	|
+		   SCTLR2_EL1_CPTM	|
+		   SCTLR2_EL1_CPTM0,
+		   FEAT_CPA2),
+};
+
+static const DECLARE_FEAT_MAP(sctlr2_desc, SCTLR2_EL1,
+			      sctlr2_feat_map, FEAT_SCTLR2);
+
+static const struct reg_bits_to_feat_map tcr2_el2_feat_map[] = {
+	NEEDS_FEAT(TCR2_EL2_FNG1	|
+		   TCR2_EL2_FNG0	|
+		   TCR2_EL2_A2,
+		   feat_asid2_e2h1),
+	NEEDS_FEAT(TCR2_EL2_DisCH1	|
+		   TCR2_EL2_DisCH0	|
+		   TCR2_EL2_D128,
+		   feat_d128_e2h1),
+	NEEDS_FEAT(TCR2_EL2_AMEC1, feat_mec_e2h1),
+	NEEDS_FEAT(TCR2_EL2_AMEC0, FEAT_MEC),
+	NEEDS_FEAT(TCR2_EL2_HAFT, FEAT_HAFT),
+	NEEDS_FEAT(TCR2_EL2_PTTWI	|
+		   TCR2_EL2_PnCH,
+		   FEAT_THE),
+	NEEDS_FEAT(TCR2_EL2_AIE, FEAT_AIE),
+	NEEDS_FEAT(TCR2_EL2_POE		|
+		   TCR2_EL2_E0POE,
+		   FEAT_S1POE),
+	NEEDS_FEAT(TCR2_EL2_PIE, FEAT_S1PIE),
+};
+
+static const DECLARE_FEAT_MAP(tcr2_el2_desc, TCR2_EL2,
+			      tcr2_el2_feat_map, FEAT_TCR2);
+
+static const struct reg_bits_to_feat_map sctlr_el1_feat_map[] = {
+	NEEDS_FEAT(SCTLR_EL1_CP15BEN	|
+		   SCTLR_EL1_ITD	|
+		   SCTLR_EL1_SED,
+		   FEAT_AA32EL0),
+	NEEDS_FEAT(SCTLR_EL1_BT0	|
+		   SCTLR_EL1_BT1,
+		   FEAT_BTI),
+	NEEDS_FEAT(SCTLR_EL1_CMOW, FEAT_CMOW),
+	NEEDS_FEAT(SCTLR_EL1_TSCXT, feat_csv2_2_csv2_1p2),
+	NEEDS_FEAT(SCTLR_EL1_EIS	|
+		   SCTLR_EL1_EOS,
+		   FEAT_ExS),
+	NEEDS_FEAT(SCTLR_EL1_EnFPM, FEAT_FPMR),
+	NEEDS_FEAT(SCTLR_EL1_IESB, FEAT_IESB),
+	NEEDS_FEAT(SCTLR_EL1_EnALS, FEAT_LS64),
+	NEEDS_FEAT(SCTLR_EL1_EnAS0, FEAT_LS64_ACCDATA),
+	NEEDS_FEAT(SCTLR_EL1_EnASR, FEAT_LS64_V),
+	NEEDS_FEAT(SCTLR_EL1_nAA, FEAT_LSE2),
+	NEEDS_FEAT(SCTLR_EL1_LSMAOE	|
+		   SCTLR_EL1_nTLSMD,
+		   FEAT_LSMAOC),
+	NEEDS_FEAT(SCTLR_EL1_EE, FEAT_MixedEnd),
+	NEEDS_FEAT(SCTLR_EL1_E0E, feat_mixedendel0),
+	NEEDS_FEAT(SCTLR_EL1_MSCEn, FEAT_MOPS),
+	NEEDS_FEAT(SCTLR_EL1_ATA0	|
+		   SCTLR_EL1_ATA	|
+		   SCTLR_EL1_TCF0	|
+		   SCTLR_EL1_TCF,
+		   FEAT_MTE2),
+	NEEDS_FEAT(SCTLR_EL1_ITFSB, feat_mte_async),
+	NEEDS_FEAT(SCTLR_EL1_TCSO0	|
+		   SCTLR_EL1_TCSO,
+		   FEAT_MTE_STORE_ONLY),
+	NEEDS_FEAT(SCTLR_EL1_NMI	|
+		   SCTLR_EL1_SPINTMASK,
+		   FEAT_NMI),
+	NEEDS_FEAT(SCTLR_EL1_SPAN, FEAT_PAN),
+	NEEDS_FEAT(SCTLR_EL1_EPAN, FEAT_PAN3),
+	NEEDS_FEAT(SCTLR_EL1_EnDA	|
+		   SCTLR_EL1_EnDB	|
+		   SCTLR_EL1_EnIA	|
+		   SCTLR_EL1_EnIB,
+		   feat_pauth),
+	NEEDS_FEAT(SCTLR_EL1_EnTP2, FEAT_SME),
+	NEEDS_FEAT(SCTLR_EL1_EnRCTX, FEAT_SPECRES),
+	NEEDS_FEAT(SCTLR_EL1_DSSBS, FEAT_SSBS),
+	NEEDS_FEAT(SCTLR_EL1_TIDCP, FEAT_TIDCP1),
+	NEEDS_FEAT(SCTLR_EL1_TME0	|
+		   SCTLR_EL1_TME	|
+		   SCTLR_EL1_TMT0	|
+		   SCTLR_EL1_TMT,
+		   FEAT_TME),
+	NEEDS_FEAT(SCTLR_EL1_TWEDEL	|
+		   SCTLR_EL1_TWEDEn,
+		   FEAT_TWED),
+	NEEDS_FEAT(SCTLR_EL1_UCI	|
+		   SCTLR_EL1_EE		|
+		   SCTLR_EL1_E0E	|
+		   SCTLR_EL1_WXN	|
+		   SCTLR_EL1_nTWE	|
+		   SCTLR_EL1_nTWI	|
+		   SCTLR_EL1_UCT	|
+		   SCTLR_EL1_DZE	|
+		   SCTLR_EL1_I		|
+		   SCTLR_EL1_UMA	|
+		   SCTLR_EL1_SA0	|
+		   SCTLR_EL1_SA		|
+		   SCTLR_EL1_C		|
+		   SCTLR_EL1_A		|
+		   SCTLR_EL1_M,
+		   FEAT_AA64EL1),
+};
+
+static const DECLARE_FEAT_MAP(sctlr_el1_desc, SCTLR_EL1,
+			      sctlr_el1_feat_map, FEAT_AA64EL1);
+
+static const struct reg_bits_to_feat_map mdcr_el2_feat_map[] = {
+	NEEDS_FEAT(MDCR_EL2_EBWE, FEAT_Debugv8p9),
+	NEEDS_FEAT(MDCR_EL2_TDOSA, FEAT_DoubleLock),
+	NEEDS_FEAT(MDCR_EL2_PMEE, FEAT_EBEP),
+	NEEDS_FEAT(MDCR_EL2_TDCC, FEAT_FGT),
+	NEEDS_FEAT(MDCR_EL2_MTPME, FEAT_MTPMU),
+	NEEDS_FEAT(MDCR_EL2_HPME	|
+		   MDCR_EL2_HPMN	|
+		   MDCR_EL2_TPMCR	|
+		   MDCR_EL2_TPM,
+		   FEAT_PMUv3),
+	NEEDS_FEAT(MDCR_EL2_HPMD, feat_pmuv3p1),
+	NEEDS_FEAT(MDCR_EL2_HCCD	|
+		   MDCR_EL2_HLP,
+		   feat_pmuv3p5),
+	NEEDS_FEAT(MDCR_EL2_HPMFZO, feat_pmuv3p7),
+	NEEDS_FEAT(MDCR_EL2_PMSSE, FEAT_PMUv3_SS),
+	NEEDS_FEAT(MDCR_EL2_E2PB	|
+		   MDCR_EL2_TPMS,
+		   FEAT_SPE),
+	NEEDS_FEAT(MDCR_EL2_HPMFZS, FEAT_SPEv1p2),
+	NEEDS_FEAT(MDCR_EL2_EnSPM, FEAT_SPMU),
+	NEEDS_FEAT(MDCR_EL2_EnSTEPOP, FEAT_STEP2),
+	NEEDS_FEAT(MDCR_EL2_E2TB, FEAT_TRBE),
+	NEEDS_FEAT(MDCR_EL2_TTRF, FEAT_TRF),
+	NEEDS_FEAT(MDCR_EL2_TDA		|
+		   MDCR_EL2_TDE		|
+		   MDCR_EL2_TDRA,
+		   FEAT_AA64EL1),
+};
+
+static const DECLARE_FEAT_MAP(mdcr_el2_desc, MDCR_EL2,
+			      mdcr_el2_feat_map, FEAT_AA64EL2);
+
+static void __init check_feat_map(const struct reg_bits_to_feat_map *map,
+				  int map_size, u64 res0, const char *str)
+{
+	u64 mask = 0;
+
+	for (int i = 0; i < map_size; i++)
+		mask |= map[i].bits;
+
+	if (mask != ~res0)
+		kvm_err("Undefined %s behaviour, bits %016llx\n",
+			str, mask ^ ~res0);
+}
+
+static u64 reg_feat_map_bits(const struct reg_bits_to_feat_map *map)
+{
+	return map->flags & RES0_POINTER ? ~(*map->res0p) : map->bits;
+}
+
+static void __init check_reg_desc(const struct reg_feat_map_desc *r)
+{
+	check_feat_map(r->bit_feat_map, r->bit_feat_map_sz,
+		       ~reg_feat_map_bits(&r->feat_map), r->name);
+}
+
+void __init check_feature_map(void)
+{
+	check_reg_desc(&hfgrtr_desc);
+	check_reg_desc(&hfgwtr_desc);
+	check_reg_desc(&hfgitr_desc);
+	check_reg_desc(&hdfgrtr_desc);
+	check_reg_desc(&hdfgwtr_desc);
+	check_reg_desc(&hafgrtr_desc);
+	check_reg_desc(&hfgrtr2_desc);
+	check_reg_desc(&hfgwtr2_desc);
+	check_reg_desc(&hfgitr2_desc);
+	check_reg_desc(&hdfgrtr2_desc);
+	check_reg_desc(&hdfgwtr2_desc);
+	check_reg_desc(&hcrx_desc);
+	check_reg_desc(&hcr_desc);
+	check_reg_desc(&sctlr2_desc);
+	check_reg_desc(&tcr2_el2_desc);
+	check_reg_desc(&sctlr_el1_desc);
+	check_reg_desc(&mdcr_el2_desc);
+}
+
+static bool idreg_feat_match(struct kvm *kvm, const struct reg_bits_to_feat_map *map)
+{
+	u64 regval = kvm->arch.id_regs[map->regidx];
+	u64 regfld = (regval >> map->shift) & GENMASK(map->width - 1, 0);
+
+	if (map->sign) {
+		s64 sfld = sign_extend64(regfld, map->width - 1);
+		s64 slim = sign_extend64(map->lo_lim, map->width - 1);
+		return sfld >= slim;
+	} else {
+		return regfld >= map->lo_lim;
+	}
+}
+
+static u64 __compute_fixed_bits(struct kvm *kvm,
+				const struct reg_bits_to_feat_map *map,
+				int map_size,
+				u64 *fixed_bits,
+				unsigned long require,
+				unsigned long exclude)
+{
+	u64 val = 0;
+
+	for (int i = 0; i < map_size; i++) {
+		bool match;
+
+		if ((map[i].flags & require) != require)
+			continue;
+
+		if (map[i].flags & exclude)
+			continue;
+
+		if (map[i].flags & CALL_FUNC)
+			match = (map[i].flags & FIXED_VALUE) ?
+				map[i].fval(kvm, fixed_bits) :
+				map[i].match(kvm);
+		else
+			match = idreg_feat_match(kvm, &map[i]);
+
+		if (!match || (map[i].flags & FIXED_VALUE))
+			val |= reg_feat_map_bits(&map[i]);
+	}
+
+	return val;
+}
+
+static u64 compute_res0_bits(struct kvm *kvm,
+			     const struct reg_bits_to_feat_map *map,
+			     int map_size,
+			     unsigned long require,
+			     unsigned long exclude)
+{
+	return __compute_fixed_bits(kvm, map, map_size, NULL,
+				    require, exclude | FIXED_VALUE);
+}
+
+static u64 compute_reg_res0_bits(struct kvm *kvm,
+				 const struct reg_feat_map_desc *r,
+				 unsigned long require, unsigned long exclude)
+
+{
+	u64 res0;
+
+	res0 = compute_res0_bits(kvm, r->bit_feat_map, r->bit_feat_map_sz,
+				 require, exclude);
+
+	/*
+	 * If computing FGUs, don't take RES0 or register existence
+	 * into account -- we're not computing bits for the register
+	 * itself.
+	 */
+	if (!(exclude & NEVER_FGU)) {
+		res0 |= compute_res0_bits(kvm, &r->feat_map, 1, require, exclude);
+		res0 |= ~reg_feat_map_bits(&r->feat_map);
+	}
+
+	return res0;
+}
+
+static u64 compute_reg_fixed_bits(struct kvm *kvm,
+				  const struct reg_feat_map_desc *r,
+				  u64 *fixed_bits, unsigned long require,
+				  unsigned long exclude)
+{
+	return __compute_fixed_bits(kvm, r->bit_feat_map, r->bit_feat_map_sz,
+				    fixed_bits, require | FIXED_VALUE, exclude);
+}
+
+void compute_fgu(struct kvm *kvm, enum fgt_group_id fgt)
+{
+	u64 val = 0;
+
+	switch (fgt) {
+	case HFGRTR_GROUP:
+		val |= compute_reg_res0_bits(kvm, &hfgrtr_desc,
+					     0, NEVER_FGU);
+		val |= compute_reg_res0_bits(kvm, &hfgwtr_desc,
+					     0, NEVER_FGU);
+		break;
+	case HFGITR_GROUP:
+		val |= compute_reg_res0_bits(kvm, &hfgitr_desc,
+					     0, NEVER_FGU);
+		break;
+	case HDFGRTR_GROUP:
+		val |= compute_reg_res0_bits(kvm, &hdfgrtr_desc,
+					     0, NEVER_FGU);
+		val |= compute_reg_res0_bits(kvm, &hdfgwtr_desc,
+					     0, NEVER_FGU);
+		break;
+	case HAFGRTR_GROUP:
+		val |= compute_reg_res0_bits(kvm, &hafgrtr_desc,
+					     0, NEVER_FGU);
+		break;
+	case HFGRTR2_GROUP:
+		val |= compute_reg_res0_bits(kvm, &hfgrtr2_desc,
+					     0, NEVER_FGU);
+		val |= compute_reg_res0_bits(kvm, &hfgwtr2_desc,
+					     0, NEVER_FGU);
+		break;
+	case HFGITR2_GROUP:
+		val |= compute_reg_res0_bits(kvm, &hfgitr2_desc,
+					     0, NEVER_FGU);
+		break;
+	case HDFGRTR2_GROUP:
+		val |= compute_reg_res0_bits(kvm, &hdfgrtr2_desc,
+					     0, NEVER_FGU);
+		val |= compute_reg_res0_bits(kvm, &hdfgwtr2_desc,
+					     0, NEVER_FGU);
+		break;
+	default:
+		BUG();
+	}
+
+	kvm->arch.fgu[fgt] = val;
+}
+
+void get_reg_fixed_bits(struct kvm *kvm, enum vcpu_sysreg reg, u64 *res0, u64 *res1)
+{
+	u64 fixed = 0, mask;
+
+	switch (reg) {
+	case HFGRTR_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hfgrtr_desc, 0, 0);
+		*res1 = HFGRTR_EL2_RES1;
+		break;
+	case HFGWTR_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hfgwtr_desc, 0, 0);
+		*res1 = HFGWTR_EL2_RES1;
+		break;
+	case HFGITR_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hfgitr_desc, 0, 0);
+		*res1 = HFGITR_EL2_RES1;
+		break;
+	case HDFGRTR_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hdfgrtr_desc, 0, 0);
+		*res1 = HDFGRTR_EL2_RES1;
+		break;
+	case HDFGWTR_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hdfgwtr_desc, 0, 0);
+		*res1 = HDFGWTR_EL2_RES1;
+		break;
+	case HAFGRTR_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hafgrtr_desc, 0, 0);
+		*res1 = HAFGRTR_EL2_RES1;
+		break;
+	case HFGRTR2_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hfgrtr2_desc, 0, 0);
+		*res1 = HFGRTR2_EL2_RES1;
+		break;
+	case HFGWTR2_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hfgwtr2_desc, 0, 0);
+		*res1 = HFGWTR2_EL2_RES1;
+		break;
+	case HFGITR2_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hfgitr2_desc, 0, 0);
+		*res1 = HFGITR2_EL2_RES1;
+		break;
+	case HDFGRTR2_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hdfgrtr2_desc, 0, 0);
+		*res1 = HDFGRTR2_EL2_RES1;
+		break;
+	case HDFGWTR2_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hdfgwtr2_desc, 0, 0);
+		*res1 = HDFGWTR2_EL2_RES1;
+		break;
+	case HCRX_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &hcrx_desc, 0, 0);
+		*res1 = __HCRX_EL2_RES1;
+		break;
+	case HCR_EL2:
+		mask = compute_reg_fixed_bits(kvm, &hcr_desc, &fixed, 0, 0);
+		*res0 = compute_reg_res0_bits(kvm, &hcr_desc, 0, 0);
+		*res0 |= (mask & ~fixed);
+		*res1 = HCR_EL2_RES1 | (mask & fixed);
+		break;
+	case SCTLR2_EL1:
+	case SCTLR2_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &sctlr2_desc, 0, 0);
+		*res1 = SCTLR2_EL1_RES1;
+		break;
+	case TCR2_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &tcr2_el2_desc, 0, 0);
+		*res1 = TCR2_EL2_RES1;
+		break;
+	case SCTLR_EL1:
+		*res0 = compute_reg_res0_bits(kvm, &sctlr_el1_desc, 0, 0);
+		*res1 = SCTLR_EL1_RES1;
+		break;
+	case MDCR_EL2:
+		*res0 = compute_reg_res0_bits(kvm, &mdcr_el2_desc, 0, 0);
+		*res1 = MDCR_EL2_RES1;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		*res0 = *res1 = 0;
+		break;
+	}
+}
+
+static __always_inline struct fgt_masks *__fgt_reg_to_masks(enum vcpu_sysreg reg)
+{
+	switch (reg) {
+	case HFGRTR_EL2:
+		return &hfgrtr_masks;
+	case HFGWTR_EL2:
+		return &hfgwtr_masks;
+	case HFGITR_EL2:
+		return &hfgitr_masks;
+	case HDFGRTR_EL2:
+		return &hdfgrtr_masks;
+	case HDFGWTR_EL2:
+		return &hdfgwtr_masks;
+	case HAFGRTR_EL2:
+		return &hafgrtr_masks;
+	case HFGRTR2_EL2:
+		return &hfgrtr2_masks;
+	case HFGWTR2_EL2:
+		return &hfgwtr2_masks;
+	case HFGITR2_EL2:
+		return &hfgitr2_masks;
+	case HDFGRTR2_EL2:
+		return &hdfgrtr2_masks;
+	case HDFGWTR2_EL2:
+		return &hdfgwtr2_masks;
+	default:
+		BUILD_BUG_ON(1);
+	}
+}
+
+static __always_inline void __compute_fgt(struct kvm_vcpu *vcpu, enum vcpu_sysreg reg)
+{
+	u64 fgu = vcpu->kvm->arch.fgu[__fgt_reg_to_group_id(reg)];
+	struct fgt_masks *m = __fgt_reg_to_masks(reg);
+	u64 clear = 0, set = 0, val = m->nmask;
+
+	set |= fgu & m->mask;
+	clear |= fgu & m->nmask;
+
+	if (is_nested_ctxt(vcpu)) {
+		u64 nested = __vcpu_sys_reg(vcpu, reg);
+		set |= nested & m->mask;
+		clear |= ~nested & m->nmask;
+	}
+
+	val |= set;
+	val &= ~clear;
+	*vcpu_fgt(vcpu, reg) = val;
+}
+
+static void __compute_hfgwtr(struct kvm_vcpu *vcpu)
+{
+	__compute_fgt(vcpu, HFGWTR_EL2);
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_38))
+		*vcpu_fgt(vcpu, HFGWTR_EL2) |= HFGWTR_EL2_TCR_EL1;
+}
+
+static void __compute_hdfgwtr(struct kvm_vcpu *vcpu)
+{
+	__compute_fgt(vcpu, HDFGWTR_EL2);
+
+	if (is_hyp_ctxt(vcpu))
+		*vcpu_fgt(vcpu, HDFGWTR_EL2) |= HDFGWTR_EL2_MDSCR_EL1;
+}
+
+void kvm_vcpu_load_fgt(struct kvm_vcpu *vcpu)
+{
+	if (!cpus_have_final_cap(ARM64_HAS_FGT))
+		return;
+
+	__compute_fgt(vcpu, HFGRTR_EL2);
+	__compute_hfgwtr(vcpu);
+	__compute_fgt(vcpu, HFGITR_EL2);
+	__compute_fgt(vcpu, HDFGRTR_EL2);
+	__compute_hdfgwtr(vcpu);
+	__compute_fgt(vcpu, HAFGRTR_EL2);
+
+	if (!cpus_have_final_cap(ARM64_HAS_FGT2))
+		return;
+
+	__compute_fgt(vcpu, HFGRTR2_EL2);
+	__compute_fgt(vcpu, HFGWTR2_EL2);
+	__compute_fgt(vcpu, HFGITR2_EL2);
+	__compute_fgt(vcpu, HDFGRTR2_EL2);
+	__compute_fgt(vcpu, HDFGWTR2_EL2);
+}
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index ce8886122ed3..3ad6b7c6e4ba 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -3,7 +3,8 @@
  * Debug and Guest Debug support
  *
  * Copyright (C) 2015 - Linaro Ltd
- * Author: Alex Bennée <alex.bennee@linaro.org>
+ * Authors: Alex Bennée <alex.bennee@linaro.org>
+ * 	    Oliver Upton <oliver.upton@linux.dev>
  */
 
 #include <linux/kvm_host.h>
@@ -14,70 +15,10 @@
 #include <asm/kvm_arm.h>
 #include <asm/kvm_emulate.h>
 
-#include "trace.h"
-
-/* These are the bits of MDSCR_EL1 we may manipulate */
-#define MDSCR_EL1_DEBUG_MASK	(DBG_MDSCR_SS | \
-				DBG_MDSCR_KDE | \
-				DBG_MDSCR_MDE)
-
-static DEFINE_PER_CPU(u64, mdcr_el2);
-
-/*
- * save/restore_guest_debug_regs
- *
- * For some debug operations we need to tweak some guest registers. As
- * a result we need to save the state of those registers before we
- * make those modifications.
- *
- * Guest access to MDSCR_EL1 is trapped by the hypervisor and handled
- * after we have restored the preserved value to the main context.
- *
- * When single-step is enabled by userspace, we tweak PSTATE.SS on every
- * guest entry. Preserve PSTATE.SS so we can restore the original value
- * for the vcpu after the single-step is disabled.
- */
-static void save_guest_debug_regs(struct kvm_vcpu *vcpu)
+static int cpu_has_spe(u64 dfr0)
 {
-	u64 val = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
-
-	vcpu->arch.guest_debug_preserved.mdscr_el1 = val;
-
-	trace_kvm_arm_set_dreg32("Saved MDSCR_EL1",
-				vcpu->arch.guest_debug_preserved.mdscr_el1);
-
-	vcpu->arch.guest_debug_preserved.pstate_ss =
-					(*vcpu_cpsr(vcpu) & DBG_SPSR_SS);
-}
-
-static void restore_guest_debug_regs(struct kvm_vcpu *vcpu)
-{
-	u64 val = vcpu->arch.guest_debug_preserved.mdscr_el1;
-
-	vcpu_write_sys_reg(vcpu, val, MDSCR_EL1);
-
-	trace_kvm_arm_set_dreg32("Restored MDSCR_EL1",
-				vcpu_read_sys_reg(vcpu, MDSCR_EL1));
-
-	if (vcpu->arch.guest_debug_preserved.pstate_ss)
-		*vcpu_cpsr(vcpu) |= DBG_SPSR_SS;
-	else
-		*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
-}
-
-/**
- * kvm_arm_init_debug - grab what we need for debug
- *
- * Currently the sole task of this function is to retrieve the initial
- * value of mdcr_el2 so we can preserve MDCR_EL2.HPMN which has
- * presumably been set-up by some knowledgeable bootcode.
- *
- * It is called once per-cpu during CPU hyp initialisation.
- */
-
-void kvm_arm_init_debug(void)
-{
-	__this_cpu_write(mdcr_el2, kvm_call_hyp_ret(__kvm_get_mdcr_el2));
+	return cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_PMSVer_SHIFT) &&
+	       !(read_sysreg_s(SYS_PMBIDR_EL1) & PMBIDR_EL1_P);
 }
 
 /**
@@ -95,11 +36,14 @@ void kvm_arm_init_debug(void)
  */
 static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
 {
+	preempt_disable();
+
 	/*
 	 * This also clears MDCR_EL2_E2PB_MASK and MDCR_EL2_E2TB_MASK
 	 * to disable guest access to the profiling and trace buffers
 	 */
-	vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK;
+	vcpu->arch.mdcr_el2 = FIELD_PREP(MDCR_EL2_HPMN,
+					 *host_data_ptr(nr_event_counters));
 	vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM |
 				MDCR_EL2_TPMS |
 				MDCR_EL2_TTRF |
@@ -113,233 +57,234 @@ static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
 		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
 
 	/*
-	 * Trap debug register access when one of the following is true:
-	 *  - Userspace is using the hardware to debug the guest
-	 *  (KVM_GUESTDBG_USE_HW is set).
-	 *  - The guest is not using debug (DEBUG_DIRTY clear).
-	 *  - The guest has enabled the OS Lock (debug exceptions are blocked).
+	 * Trap debug registers if the guest doesn't have ownership of them.
 	 */
-	if ((vcpu->guest_debug & KVM_GUESTDBG_USE_HW) ||
-	    !vcpu_get_flag(vcpu, DEBUG_DIRTY) ||
-	    kvm_vcpu_os_lock_enabled(vcpu))
+	if (!kvm_guest_owns_debug_regs(vcpu))
 		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
 
-	trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
-}
+	if (vcpu_has_nv(vcpu))
+		kvm_nested_setup_mdcr_el2(vcpu);
+
+	/* Write MDCR_EL2 directly if we're already at EL2 */
+	if (has_vhe())
+		write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
 
-/**
- * kvm_arm_vcpu_init_debug - setup vcpu debug traps
- *
- * @vcpu:	the vcpu pointer
- *
- * Set vcpu initial mdcr_el2 value.
- */
-void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
-{
-	preempt_disable();
-	kvm_arm_setup_mdcr_el2(vcpu);
 	preempt_enable();
 }
 
-/**
- * kvm_arm_reset_debug_ptr - reset the debug ptr to point to the vcpu state
- * @vcpu:	the vcpu pointer
- */
+void kvm_init_host_debug_data(void)
+{
+	u64 dfr0 = read_sysreg(id_aa64dfr0_el1);
+
+	if (cpuid_feature_extract_signed_field(dfr0, ID_AA64DFR0_EL1_PMUVer_SHIFT) > 0)
+		*host_data_ptr(nr_event_counters) = FIELD_GET(ARMV8_PMU_PMCR_N,
+							      read_sysreg(pmcr_el0));
+
+	*host_data_ptr(debug_brps) = SYS_FIELD_GET(ID_AA64DFR0_EL1, BRPs, dfr0);
+	*host_data_ptr(debug_wrps) = SYS_FIELD_GET(ID_AA64DFR0_EL1, WRPs, dfr0);
+
+	if (cpu_has_spe(dfr0))
+		host_data_set_flag(HAS_SPE);
 
-void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
+	if (has_vhe())
+		return;
+
+	/* Check if we have BRBE implemented and available at the host */
+	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_BRBE_SHIFT))
+		host_data_set_flag(HAS_BRBE);
+
+	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceFilt_SHIFT)) {
+		/* Force disable trace in protected mode in case of no TRBE */
+		if (is_protected_kvm_enabled())
+			host_data_set_flag(EL1_TRACING_CONFIGURED);
+
+		if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceBuffer_SHIFT) &&
+		    !(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_EL1_P))
+			host_data_set_flag(HAS_TRBE);
+	}
+}
+
+void kvm_debug_init_vhe(void)
 {
-	vcpu->arch.debug_ptr = &vcpu->arch.vcpu_debug_state;
+	/* Clear PMSCR_EL1.E{0,1}SPE which reset to UNKNOWN values. */
+	if (host_data_test_flag(HAS_SPE))
+		write_sysreg_el1(0, SYS_PMSCR);
 }
 
-/**
- * kvm_arm_setup_debug - set up debug related stuff
+/*
+ * Configures the 'external' MDSCR_EL1 value for the guest, i.e. when the host
+ * has taken over MDSCR_EL1.
  *
- * @vcpu:	the vcpu pointer
+ *  - Userspace is single-stepping the guest, and MDSCR_EL1.SS is forced to 1.
  *
- * This is called before each entry into the hypervisor to setup any
- * debug related registers.
+ *  - Userspace is using the breakpoint/watchpoint registers to debug the
+ *    guest, and MDSCR_EL1.MDE is forced to 1.
  *
- * Additionally, KVM only traps guest accesses to the debug registers if
- * the guest is not actively using them (see the DEBUG_DIRTY
- * flag on vcpu->arch.iflags).  Since the guest must not interfere
- * with the hardware state when debugging the guest, we must ensure that
- * trapping is enabled whenever we are debugging the guest using the
- * debug registers.
+ *  - The guest has enabled the OS Lock, and KVM is forcing MDSCR_EL1.MDE to 0,
+ *    masking all debug exceptions affected by the OS Lock.
  */
+static void setup_external_mdscr(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * Use the guest's MDSCR_EL1 as a starting point, since there are
+	 * several other features controlled by MDSCR_EL1 that are not relevant
+	 * to the host.
+	 *
+	 * Clear the bits that KVM may use which also satisfies emulation of
+	 * the OS Lock as MDSCR_EL1.MDE is cleared.
+	 */
+	u64 mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1) & ~(MDSCR_EL1_SS |
+							   MDSCR_EL1_MDE |
+							   MDSCR_EL1_KDE);
+
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		mdscr |= MDSCR_EL1_SS;
+
+	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW)
+		mdscr |= MDSCR_EL1_MDE | MDSCR_EL1_KDE;
 
-void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
+	vcpu->arch.external_mdscr_el1 = mdscr;
+}
+
+void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu)
 {
-	unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2;
+	u64 mdscr;
 
-	trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
+	/* Must be called before kvm_vcpu_load_vhe() */
+	KVM_BUG_ON(vcpu_get_flag(vcpu, SYSREGS_ON_CPU), vcpu->kvm);
 
-	kvm_arm_setup_mdcr_el2(vcpu);
+	if (has_vhe())
+		*host_data_ptr(host_debug_state.mdcr_el2) = read_sysreg(mdcr_el2);
 
-	/* Check if we need to use the debug registers. */
+	/*
+	 * Determine which of the possible debug states we're in:
+	 *
+	 *  - VCPU_DEBUG_HOST_OWNED: KVM has taken ownership of the guest's
+	 *    breakpoint/watchpoint registers, or needs to use MDSCR_EL1 to do
+	 *    software step or emulate the effects of the OS Lock being enabled.
+	 *
+	 *  - VCPU_DEBUG_GUEST_OWNED: The guest has debug exceptions enabled, and
+	 *    the breakpoint/watchpoint registers need to be loaded eagerly.
+	 *
+	 *  - VCPU_DEBUG_FREE: Neither of the above apply, no breakpoint/watchpoint
+	 *    context needs to be loaded on the CPU.
+	 */
 	if (vcpu->guest_debug || kvm_vcpu_os_lock_enabled(vcpu)) {
-		/* Save guest debug state */
-		save_guest_debug_regs(vcpu);
+		vcpu->arch.debug_owner = VCPU_DEBUG_HOST_OWNED;
+		setup_external_mdscr(vcpu);
 
 		/*
-		 * Single Step (ARM ARM D2.12.3 The software step state
-		 * machine)
-		 *
-		 * If we are doing Single Step we need to manipulate
-		 * the guest's MDSCR_EL1.SS and PSTATE.SS. Once the
-		 * step has occurred the hypervisor will trap the
-		 * debug exception and we return to userspace.
-		 *
-		 * If the guest attempts to single step its userspace
-		 * we would have to deal with a trapped exception
-		 * while in the guest kernel. Because this would be
-		 * hard to unwind we suppress the guest's ability to
-		 * do so by masking MDSCR_EL.SS.
-		 *
-		 * This confuses guest debuggers which use
-		 * single-step behind the scenes but everything
-		 * returns to normal once the host is no longer
-		 * debugging the system.
+		 * Steal the guest's single-step state machine if userspace wants
+		 * single-step the guest.
 		 */
 		if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
-			/*
-			 * If the software step state at the last guest exit
-			 * was Active-pending, we don't set DBG_SPSR_SS so
-			 * that the state is maintained (to not run another
-			 * single-step until the pending Software Step
-			 * exception is taken).
-			 */
-			if (!vcpu_get_flag(vcpu, DBG_SS_ACTIVE_PENDING))
+			if (*vcpu_cpsr(vcpu) & DBG_SPSR_SS)
+				vcpu_clear_flag(vcpu, GUEST_SS_ACTIVE_PENDING);
+			else
+				vcpu_set_flag(vcpu, GUEST_SS_ACTIVE_PENDING);
+
+			if (!vcpu_get_flag(vcpu, HOST_SS_ACTIVE_PENDING))
 				*vcpu_cpsr(vcpu) |= DBG_SPSR_SS;
 			else
 				*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
-
-			mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
-			mdscr |= DBG_MDSCR_SS;
-			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
-		} else {
-			mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
-			mdscr &= ~DBG_MDSCR_SS;
-			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
 		}
+	} else {
+		mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
 
-		trace_kvm_arm_set_dreg32("SPSR_EL2", *vcpu_cpsr(vcpu));
-
-		/*
-		 * HW Breakpoints and watchpoints
-		 *
-		 * We simply switch the debug_ptr to point to our new
-		 * external_debug_state which has been populated by the
-		 * debug ioctl. The existing DEBUG_DIRTY mechanism ensures
-		 * the registers are updated on the world switch.
-		 */
-		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
-			/* Enable breakpoints/watchpoints */
-			mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
-			mdscr |= DBG_MDSCR_MDE;
-			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
-
-			vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state;
-			vcpu_set_flag(vcpu, DEBUG_DIRTY);
-
-			trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
-						&vcpu->arch.debug_ptr->dbg_bcr[0],
-						&vcpu->arch.debug_ptr->dbg_bvr[0]);
-
-			trace_kvm_arm_set_regset("WAPTS", get_num_wrps(),
-						&vcpu->arch.debug_ptr->dbg_wcr[0],
-						&vcpu->arch.debug_ptr->dbg_wvr[0]);
-
-		/*
-		 * The OS Lock blocks debug exceptions in all ELs when it is
-		 * enabled. If the guest has enabled the OS Lock, constrain its
-		 * effects to the guest. Emulate the behavior by clearing
-		 * MDSCR_EL1.MDE. In so doing, we ensure that host debug
-		 * exceptions are unaffected by guest configuration of the OS
-		 * Lock.
-		 */
-		} else if (kvm_vcpu_os_lock_enabled(vcpu)) {
-			mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
-			mdscr &= ~DBG_MDSCR_MDE;
-			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
-		}
+		if (mdscr & (MDSCR_EL1_KDE | MDSCR_EL1_MDE))
+			vcpu->arch.debug_owner = VCPU_DEBUG_GUEST_OWNED;
+		else
+			vcpu->arch.debug_owner = VCPU_DEBUG_FREE;
 	}
 
-	BUG_ON(!vcpu->guest_debug &&
-		vcpu->arch.debug_ptr != &vcpu->arch.vcpu_debug_state);
-
-	/* If KDE or MDE are set, perform a full save/restore cycle. */
-	if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
-		vcpu_set_flag(vcpu, DEBUG_DIRTY);
-
-	/* Write mdcr_el2 changes since vcpu_load on VHE systems */
-	if (has_vhe() && orig_mdcr_el2 != vcpu->arch.mdcr_el2)
-		write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
-
-	trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1));
+	kvm_arm_setup_mdcr_el2(vcpu);
 }
 
-void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
+void kvm_vcpu_put_debug(struct kvm_vcpu *vcpu)
 {
-	trace_kvm_arm_clear_debug(vcpu->guest_debug);
+	if (has_vhe())
+		write_sysreg(*host_data_ptr(host_debug_state.mdcr_el2), mdcr_el2);
+
+	if (likely(!(vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)))
+		return;
 
 	/*
-	 * Restore the guest's debug registers if we were using them.
+	 * Save the host's software step state and restore the guest's before
+	 * potentially returning to userspace.
 	 */
-	if (vcpu->guest_debug || kvm_vcpu_os_lock_enabled(vcpu)) {
-		if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
-			if (!(*vcpu_cpsr(vcpu) & DBG_SPSR_SS))
-				/*
-				 * Mark the vcpu as ACTIVE_PENDING
-				 * until Software Step exception is taken.
-				 */
-				vcpu_set_flag(vcpu, DBG_SS_ACTIVE_PENDING);
-		}
+	if (!(*vcpu_cpsr(vcpu) & DBG_SPSR_SS))
+		vcpu_set_flag(vcpu, HOST_SS_ACTIVE_PENDING);
+	else
+		vcpu_clear_flag(vcpu, HOST_SS_ACTIVE_PENDING);
+
+	if (vcpu_get_flag(vcpu, GUEST_SS_ACTIVE_PENDING))
+		*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
+	else
+		*vcpu_cpsr(vcpu) |= DBG_SPSR_SS;
+}
 
-		restore_guest_debug_regs(vcpu);
+/*
+ * Updates ownership of the debug registers after a trapped guest access to a
+ * breakpoint/watchpoint register. Host ownership of the debug registers is of
+ * strictly higher priority, and it is the responsibility of the VMM to emulate
+ * guest debug exceptions in this configuration.
+ */
+void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu)
+{
+	if (kvm_host_owns_debug_regs(vcpu))
+		return;
 
-		/*
-		 * If we were using HW debug we need to restore the
-		 * debug_ptr to the guest debug state.
-		 */
-		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
-			kvm_arm_reset_debug_ptr(vcpu);
+	vcpu->arch.debug_owner = VCPU_DEBUG_GUEST_OWNED;
+	kvm_arm_setup_mdcr_el2(vcpu);
+}
 
-			trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
-						&vcpu->arch.debug_ptr->dbg_bcr[0],
-						&vcpu->arch.debug_ptr->dbg_bvr[0]);
+void kvm_debug_handle_oslar(struct kvm_vcpu *vcpu, u64 val)
+{
+	if (val & OSLAR_EL1_OSLK)
+		__vcpu_rmw_sys_reg(vcpu, OSLSR_EL1, |=, OSLSR_EL1_OSLK);
+	else
+		__vcpu_rmw_sys_reg(vcpu, OSLSR_EL1, &=, ~OSLSR_EL1_OSLK);
 
-			trace_kvm_arm_set_regset("WAPTS", get_num_wrps(),
-						&vcpu->arch.debug_ptr->dbg_wcr[0],
-						&vcpu->arch.debug_ptr->dbg_wvr[0]);
-		}
-	}
+	preempt_disable();
+	kvm_arch_vcpu_put(vcpu);
+	kvm_arch_vcpu_load(vcpu, smp_processor_id());
+	preempt_enable();
 }
 
-void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu)
+static bool skip_trbe_access(bool skip_condition)
 {
-	u64 dfr0;
+	return (WARN_ON_ONCE(preemptible()) || skip_condition ||
+		is_protected_kvm_enabled() || !is_kvm_arm_initialised());
+}
 
-	/* For VHE, there is nothing to do */
-	if (has_vhe())
-		return;
+void kvm_enable_trbe(void)
+{
+	if (!skip_trbe_access(has_vhe()))
+		host_data_set_flag(TRBE_ENABLED);
+}
+EXPORT_SYMBOL_GPL(kvm_enable_trbe);
 
-	dfr0 = read_sysreg(id_aa64dfr0_el1);
-	/*
-	 * If SPE is present on this CPU and is available at current EL,
-	 * we may need to check if the host state needs to be saved.
-	 */
-	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_PMSVer_SHIFT) &&
-	    !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(PMBIDR_EL1_P_SHIFT)))
-		vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_SPE);
-
-	/* Check if we have TRBE implemented and available at the host */
-	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceBuffer_SHIFT) &&
-	    !(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_EL1_P))
-		vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
+void kvm_disable_trbe(void)
+{
+	if (!skip_trbe_access(has_vhe()))
+		host_data_clear_flag(TRBE_ENABLED);
 }
+EXPORT_SYMBOL_GPL(kvm_disable_trbe);
 
-void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu)
+void kvm_tracing_set_el1_configuration(u64 trfcr_while_in_guest)
 {
-	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_SPE);
-	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
+	if (skip_trbe_access(false))
+		return;
+
+	if (has_vhe()) {
+		write_sysreg_s(trfcr_while_in_guest, SYS_TRFCR_EL12);
+		return;
+	}
+
+	*host_data_ptr(trfcr_while_in_guest) = trfcr_while_in_guest;
+	if (read_sysreg_s(SYS_TRFCR_EL1) != trfcr_while_in_guest)
+		host_data_set_flag(EL1_TRACING_CONFIGURED);
+	else
+		host_data_clear_flag(EL1_TRACING_CONFIGURED);
 }
+EXPORT_SYMBOL_GPL(kvm_tracing_set_el1_configuration);
diff --git a/arch/arm64/kvm/emulate-nested.c b/arch/arm64/kvm/emulate-nested.c
index 1ffbfd1c3cf2..834f13fb1fb7 100644
--- a/arch/arm64/kvm/emulate-nested.c
+++ b/arch/arm64/kvm/emulate-nested.c
@@ -88,6 +88,10 @@ enum cgt_group_id {
 
 	CGT_HCRX_EnFPM,
 	CGT_HCRX_TCR2En,
+	CGT_HCRX_SCTLR2En,
+
+	CGT_CNTHCTL_EL1TVT,
+	CGT_CNTHCTL_EL1TVCT,
 
 	CGT_ICH_HCR_TC,
 	CGT_ICH_HCR_TALL0,
@@ -105,6 +109,7 @@ enum cgt_group_id {
 	CGT_HCR_TTLB_TTLBOS,
 	CGT_HCR_TVM_TRVM,
 	CGT_HCR_TVM_TRVM_HCRX_TCR2En,
+	CGT_HCR_TVM_TRVM_HCRX_SCTLR2En,
 	CGT_HCR_TPU_TICAB,
 	CGT_HCR_TPU_TOCU,
 	CGT_HCR_NV1_nNV2_ENSCXT,
@@ -124,6 +129,8 @@ enum cgt_group_id {
 	__COMPLEX_CONDITIONS__,
 	CGT_CNTHCTL_EL1PCTEN = __COMPLEX_CONDITIONS__,
 	CGT_CNTHCTL_EL1PTEN,
+	CGT_CNTHCTL_EL1NVPCT,
+	CGT_CNTHCTL_EL1NVVCT,
 
 	CGT_CPTR_TTA,
 	CGT_MDCR_HPMN,
@@ -393,28 +400,46 @@ static const struct trap_bits coarse_trap_bits[] = {
 		.mask		= HCRX_EL2_TCR2En,
 		.behaviour	= BEHAVE_FORWARD_RW,
 	},
+	[CGT_HCRX_SCTLR2En] = {
+		.index		= HCRX_EL2,
+		.value		= 0,
+		.mask		= HCRX_EL2_SCTLR2En,
+		.behaviour	= BEHAVE_FORWARD_RW,
+	},
+	[CGT_CNTHCTL_EL1TVT] = {
+		.index		= CNTHCTL_EL2,
+		.value		= CNTHCTL_EL1TVT,
+		.mask		= CNTHCTL_EL1TVT,
+		.behaviour	= BEHAVE_FORWARD_RW,
+	},
+	[CGT_CNTHCTL_EL1TVCT] = {
+		.index		= CNTHCTL_EL2,
+		.value		= CNTHCTL_EL1TVCT,
+		.mask		= CNTHCTL_EL1TVCT,
+		.behaviour	= BEHAVE_FORWARD_READ,
+	},
 	[CGT_ICH_HCR_TC] = {
 		.index		= ICH_HCR_EL2,
-		.value		= ICH_HCR_TC,
-		.mask		= ICH_HCR_TC,
+		.value		= ICH_HCR_EL2_TC,
+		.mask		= ICH_HCR_EL2_TC,
 		.behaviour	= BEHAVE_FORWARD_RW,
 	},
 	[CGT_ICH_HCR_TALL0] = {
 		.index		= ICH_HCR_EL2,
-		.value		= ICH_HCR_TALL0,
-		.mask		= ICH_HCR_TALL0,
+		.value		= ICH_HCR_EL2_TALL0,
+		.mask		= ICH_HCR_EL2_TALL0,
 		.behaviour	= BEHAVE_FORWARD_RW,
 	},
 	[CGT_ICH_HCR_TALL1] = {
 		.index		= ICH_HCR_EL2,
-		.value		= ICH_HCR_TALL1,
-		.mask		= ICH_HCR_TALL1,
+		.value		= ICH_HCR_EL2_TALL1,
+		.mask		= ICH_HCR_EL2_TALL1,
 		.behaviour	= BEHAVE_FORWARD_RW,
 	},
 	[CGT_ICH_HCR_TDIR] = {
 		.index		= ICH_HCR_EL2,
-		.value		= ICH_HCR_TDIR,
-		.mask		= ICH_HCR_TDIR,
+		.value		= ICH_HCR_EL2_TDIR,
+		.mask		= ICH_HCR_EL2_TDIR,
 		.behaviour	= BEHAVE_FORWARD_RW,
 	},
 };
@@ -432,6 +457,8 @@ static const enum cgt_group_id *coarse_control_combo[] = {
 	MCB(CGT_HCR_TVM_TRVM,		CGT_HCR_TVM, CGT_HCR_TRVM),
 	MCB(CGT_HCR_TVM_TRVM_HCRX_TCR2En,
 					CGT_HCR_TVM, CGT_HCR_TRVM, CGT_HCRX_TCR2En),
+	MCB(CGT_HCR_TVM_TRVM_HCRX_SCTLR2En,
+					CGT_HCR_TVM, CGT_HCR_TRVM, CGT_HCRX_SCTLR2En),
 	MCB(CGT_HCR_TPU_TICAB,		CGT_HCR_TPU, CGT_HCR_TICAB),
 	MCB(CGT_HCR_TPU_TOCU,		CGT_HCR_TPU, CGT_HCR_TOCU),
 	MCB(CGT_HCR_NV1_nNV2_ENSCXT,	CGT_HCR_NV1_nNV2, CGT_HCR_ENSCXT),
@@ -487,6 +514,32 @@ static enum trap_behaviour check_cnthctl_el1pten(struct kvm_vcpu *vcpu)
 	return BEHAVE_FORWARD_RW;
 }
 
+static bool is_nested_nv2_guest(struct kvm_vcpu *vcpu)
+{
+	u64 val;
+
+	val = __vcpu_sys_reg(vcpu, HCR_EL2);
+	return ((val & (HCR_E2H | HCR_TGE | HCR_NV2 | HCR_NV1 | HCR_NV)) == (HCR_E2H | HCR_NV2 | HCR_NV));
+}
+
+static enum trap_behaviour check_cnthctl_el1nvpct(struct kvm_vcpu *vcpu)
+{
+	if (!is_nested_nv2_guest(vcpu) ||
+	    !(__vcpu_sys_reg(vcpu, CNTHCTL_EL2) & CNTHCTL_EL1NVPCT))
+		return BEHAVE_HANDLE_LOCALLY;
+
+	return BEHAVE_FORWARD_RW;
+}
+
+static enum trap_behaviour check_cnthctl_el1nvvct(struct kvm_vcpu *vcpu)
+{
+	if (!is_nested_nv2_guest(vcpu) ||
+	    !(__vcpu_sys_reg(vcpu, CNTHCTL_EL2) & CNTHCTL_EL1NVVCT))
+		return BEHAVE_HANDLE_LOCALLY;
+
+	return BEHAVE_FORWARD_RW;
+}
+
 static enum trap_behaviour check_cptr_tta(struct kvm_vcpu *vcpu)
 {
 	u64 val = __vcpu_sys_reg(vcpu, CPTR_EL2);
@@ -494,7 +547,7 @@ static enum trap_behaviour check_cptr_tta(struct kvm_vcpu *vcpu)
 	if (!vcpu_el2_e2h_is_set(vcpu))
 		val = translate_cptr_el2_to_cpacr_el1(val);
 
-	if (val & CPACR_ELx_TTA)
+	if (val & CPACR_EL1_TTA)
 		return BEHAVE_FORWARD_RW;
 
 	return BEHAVE_HANDLE_LOCALLY;
@@ -534,6 +587,8 @@ static enum trap_behaviour check_mdcr_hpmn(struct kvm_vcpu *vcpu)
 static const complex_condition_check ccc[] = {
 	CCC(CGT_CNTHCTL_EL1PCTEN, check_cnthctl_el1pcten),
 	CCC(CGT_CNTHCTL_EL1PTEN, check_cnthctl_el1pten),
+	CCC(CGT_CNTHCTL_EL1NVPCT, check_cnthctl_el1nvpct),
+	CCC(CGT_CNTHCTL_EL1NVVCT, check_cnthctl_el1nvvct),
 	CCC(CGT_CPTR_TTA, check_cptr_tta),
 	CCC(CGT_MDCR_HPMN, check_mdcr_hpmn),
 };
@@ -577,6 +632,11 @@ struct encoding_to_trap_config {
 	const unsigned int		line;
 };
 
+/*
+ * WARNING: using ranges is a treacherous endeavour, as sysregs that
+ * are part of an architectural range are not necessarily contiguous
+ * in the [Op0,Op1,CRn,CRm,Ops] space. Tread carefully.
+ */
 #define SR_RANGE_TRAP(sr_start, sr_end, trap_id)			\
 	{								\
 		.encoding	= sr_start,				\
@@ -732,6 +792,7 @@ static const struct encoding_to_trap_config encoding_to_cgt[] __initconst = {
 	SR_TRAP(OP_TLBI_RVALE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
 	SR_TRAP(OP_TLBI_RVAALE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
 	SR_TRAP(SYS_SCTLR_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_SCTLR2_EL1,		CGT_HCR_TVM_TRVM_HCRX_SCTLR2En),
 	SR_TRAP(SYS_TTBR0_EL1,		CGT_HCR_TVM_TRVM),
 	SR_TRAP(SYS_TTBR1_EL1,		CGT_HCR_TVM_TRVM),
 	SR_TRAP(SYS_TCR_EL1,		CGT_HCR_TVM_TRVM),
@@ -850,11 +911,15 @@ static const struct encoding_to_trap_config encoding_to_cgt[] __initconst = {
 		      SYS_CNTHP_CVAL_EL2, CGT_HCR_NV),
 	SR_RANGE_TRAP(SYS_CNTHV_TVAL_EL2,
 		      SYS_CNTHV_CVAL_EL2, CGT_HCR_NV),
-	/* All _EL02, _EL12 registers */
+	/* All _EL02, _EL12 registers up to CNTKCTL_EL12*/
 	SR_RANGE_TRAP(sys_reg(3, 5, 0, 0, 0),
 		      sys_reg(3, 5, 10, 15, 7), CGT_HCR_NV),
 	SR_RANGE_TRAP(sys_reg(3, 5, 12, 0, 0),
-		      sys_reg(3, 5, 14, 15, 7), CGT_HCR_NV),
+		      sys_reg(3, 5, 14, 1, 0), CGT_HCR_NV),
+	SR_TRAP(SYS_CNTP_CTL_EL02,	CGT_CNTHCTL_EL1NVPCT),
+	SR_TRAP(SYS_CNTP_CVAL_EL02,	CGT_CNTHCTL_EL1NVPCT),
+	SR_TRAP(SYS_CNTV_CTL_EL02,	CGT_CNTHCTL_EL1NVVCT),
+	SR_TRAP(SYS_CNTV_CVAL_EL02,	CGT_CNTHCTL_EL1NVVCT),
 	SR_TRAP(OP_AT_S1E2R,		CGT_HCR_NV),
 	SR_TRAP(OP_AT_S1E2W,		CGT_HCR_NV),
 	SR_TRAP(OP_AT_S12E1R,		CGT_HCR_NV),
@@ -1120,6 +1185,7 @@ static const struct encoding_to_trap_config encoding_to_cgt[] __initconst = {
 	SR_TRAP(SYS_PMSIRR_EL1,		CGT_MDCR_TPMS),
 	SR_TRAP(SYS_PMSLATFR_EL1,	CGT_MDCR_TPMS),
 	SR_TRAP(SYS_PMSNEVFR_EL1,	CGT_MDCR_TPMS),
+	SR_TRAP(SYS_PMSDSFR_EL1,	CGT_MDCR_TPMS),
 	SR_TRAP(SYS_TRFCR_EL1,		CGT_MDCR_TTRF),
 	SR_TRAP(SYS_TRBBASER_EL1,	CGT_MDCR_E2TB),
 	SR_TRAP(SYS_TRBLIMITR_EL1,	CGT_MDCR_E2TB),
@@ -1184,6 +1250,11 @@ static const struct encoding_to_trap_config encoding_to_cgt[] __initconst = {
 	SR_TRAP(SYS_CNTP_CTL_EL0,	CGT_CNTHCTL_EL1PTEN),
 	SR_TRAP(SYS_CNTPCT_EL0,		CGT_CNTHCTL_EL1PCTEN),
 	SR_TRAP(SYS_CNTPCTSS_EL0,	CGT_CNTHCTL_EL1PCTEN),
+	SR_TRAP(SYS_CNTV_TVAL_EL0,	CGT_CNTHCTL_EL1TVT),
+	SR_TRAP(SYS_CNTV_CVAL_EL0,	CGT_CNTHCTL_EL1TVT),
+	SR_TRAP(SYS_CNTV_CTL_EL0,	CGT_CNTHCTL_EL1TVT),
+	SR_TRAP(SYS_CNTVCT_EL0,		CGT_CNTHCTL_EL1TVCT),
+	SR_TRAP(SYS_CNTVCTSS_EL0,	CGT_CNTHCTL_EL1TVCT),
 	SR_TRAP(SYS_FPMR,		CGT_HCRX_EnFPM),
 	/*
 	 * IMPDEF choice:
@@ -1225,98 +1296,129 @@ enum fg_filter_id {
 	__NR_FG_FILTER_IDS__
 };
 
-#define SR_FGF(sr, g, b, p, f)					\
-	{							\
-		.encoding	= sr,				\
-		.end		= sr,				\
-		.tc		= {				\
+#define __FGT(g, b, p, f)					\
+		{						\
 			.fgt = g ## _GROUP,			\
 			.bit = g ## _EL2_ ## b ## _SHIFT,	\
 			.pol = p,				\
 			.fgf = f,				\
-		},						\
+		}
+
+#define FGT(g, b, p)		__FGT(g, b, p, __NO_FGF__)
+
+/*
+ * See the warning next to SR_RANGE_TRAP(), and apply the same
+ * level of caution.
+ */
+#define SR_FGF_RANGE(sr, e, g, b, p, f)				\
+	{							\
+		.encoding	= sr,				\
+		.end		= e,				\
+		.tc		= __FGT(g, b, p, f),		\
 		.line = __LINE__,				\
 	}
 
-#define SR_FGT(sr, g, b, p)	SR_FGF(sr, g, b, p, __NO_FGF__)
+#define SR_FGF(sr, g, b, p, f) 	SR_FGF_RANGE(sr, sr, g, b, p, f)
+#define SR_FGT(sr, g, b, p)	SR_FGF_RANGE(sr, sr, g, b, p, __NO_FGF__)
+#define SR_FGT_RANGE(sr, end, g, b, p)	\
+				SR_FGF_RANGE(sr, end, g, b, p, __NO_FGF__)
 
 static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	/* HFGRTR_EL2, HFGWTR_EL2 */
-	SR_FGT(SYS_AMAIR2_EL1,		HFGxTR, nAMAIR2_EL1, 0),
-	SR_FGT(SYS_MAIR2_EL1,		HFGxTR, nMAIR2_EL1, 0),
-	SR_FGT(SYS_S2POR_EL1,		HFGxTR, nS2POR_EL1, 0),
-	SR_FGT(SYS_POR_EL1,		HFGxTR, nPOR_EL1, 0),
-	SR_FGT(SYS_POR_EL0,		HFGxTR, nPOR_EL0, 0),
-	SR_FGT(SYS_PIR_EL1,		HFGxTR, nPIR_EL1, 0),
-	SR_FGT(SYS_PIRE0_EL1,		HFGxTR, nPIRE0_EL1, 0),
-	SR_FGT(SYS_RCWMASK_EL1,		HFGxTR, nRCWMASK_EL1, 0),
-	SR_FGT(SYS_TPIDR2_EL0,		HFGxTR, nTPIDR2_EL0, 0),
-	SR_FGT(SYS_SMPRI_EL1,		HFGxTR, nSMPRI_EL1, 0),
-	SR_FGT(SYS_GCSCR_EL1,		HFGxTR, nGCS_EL1, 0),
-	SR_FGT(SYS_GCSPR_EL1,		HFGxTR, nGCS_EL1, 0),
-	SR_FGT(SYS_GCSCRE0_EL1,		HFGxTR, nGCS_EL0, 0),
-	SR_FGT(SYS_GCSPR_EL0,		HFGxTR, nGCS_EL0, 0),
-	SR_FGT(SYS_ACCDATA_EL1,		HFGxTR, nACCDATA_EL1, 0),
-	SR_FGT(SYS_ERXADDR_EL1,		HFGxTR, ERXADDR_EL1, 1),
-	SR_FGT(SYS_ERXPFGCDN_EL1,	HFGxTR, ERXPFGCDN_EL1, 1),
-	SR_FGT(SYS_ERXPFGCTL_EL1,	HFGxTR, ERXPFGCTL_EL1, 1),
-	SR_FGT(SYS_ERXPFGF_EL1,		HFGxTR, ERXPFGF_EL1, 1),
-	SR_FGT(SYS_ERXMISC0_EL1,	HFGxTR, ERXMISCn_EL1, 1),
-	SR_FGT(SYS_ERXMISC1_EL1,	HFGxTR, ERXMISCn_EL1, 1),
-	SR_FGT(SYS_ERXMISC2_EL1,	HFGxTR, ERXMISCn_EL1, 1),
-	SR_FGT(SYS_ERXMISC3_EL1,	HFGxTR, ERXMISCn_EL1, 1),
-	SR_FGT(SYS_ERXSTATUS_EL1,	HFGxTR, ERXSTATUS_EL1, 1),
-	SR_FGT(SYS_ERXCTLR_EL1,		HFGxTR, ERXCTLR_EL1, 1),
-	SR_FGT(SYS_ERXFR_EL1,		HFGxTR, ERXFR_EL1, 1),
-	SR_FGT(SYS_ERRSELR_EL1,		HFGxTR, ERRSELR_EL1, 1),
-	SR_FGT(SYS_ERRIDR_EL1,		HFGxTR, ERRIDR_EL1, 1),
-	SR_FGT(SYS_ICC_IGRPEN0_EL1,	HFGxTR, ICC_IGRPENn_EL1, 1),
-	SR_FGT(SYS_ICC_IGRPEN1_EL1,	HFGxTR, ICC_IGRPENn_EL1, 1),
-	SR_FGT(SYS_VBAR_EL1,		HFGxTR, VBAR_EL1, 1),
-	SR_FGT(SYS_TTBR1_EL1,		HFGxTR, TTBR1_EL1, 1),
-	SR_FGT(SYS_TTBR0_EL1,		HFGxTR, TTBR0_EL1, 1),
-	SR_FGT(SYS_TPIDR_EL0,		HFGxTR, TPIDR_EL0, 1),
-	SR_FGT(SYS_TPIDRRO_EL0,		HFGxTR, TPIDRRO_EL0, 1),
-	SR_FGT(SYS_TPIDR_EL1,		HFGxTR, TPIDR_EL1, 1),
-	SR_FGT(SYS_TCR_EL1,		HFGxTR, TCR_EL1, 1),
-	SR_FGT(SYS_TCR2_EL1,		HFGxTR, TCR_EL1, 1),
-	SR_FGT(SYS_SCXTNUM_EL0,		HFGxTR, SCXTNUM_EL0, 1),
-	SR_FGT(SYS_SCXTNUM_EL1, 	HFGxTR, SCXTNUM_EL1, 1),
-	SR_FGT(SYS_SCTLR_EL1, 		HFGxTR, SCTLR_EL1, 1),
-	SR_FGT(SYS_REVIDR_EL1, 		HFGxTR, REVIDR_EL1, 1),
-	SR_FGT(SYS_PAR_EL1, 		HFGxTR, PAR_EL1, 1),
-	SR_FGT(SYS_MPIDR_EL1, 		HFGxTR, MPIDR_EL1, 1),
-	SR_FGT(SYS_MIDR_EL1, 		HFGxTR, MIDR_EL1, 1),
-	SR_FGT(SYS_MAIR_EL1, 		HFGxTR, MAIR_EL1, 1),
-	SR_FGT(SYS_LORSA_EL1, 		HFGxTR, LORSA_EL1, 1),
-	SR_FGT(SYS_LORN_EL1, 		HFGxTR, LORN_EL1, 1),
-	SR_FGT(SYS_LORID_EL1, 		HFGxTR, LORID_EL1, 1),
-	SR_FGT(SYS_LOREA_EL1, 		HFGxTR, LOREA_EL1, 1),
-	SR_FGT(SYS_LORC_EL1, 		HFGxTR, LORC_EL1, 1),
-	SR_FGT(SYS_ISR_EL1, 		HFGxTR, ISR_EL1, 1),
-	SR_FGT(SYS_FAR_EL1, 		HFGxTR, FAR_EL1, 1),
-	SR_FGT(SYS_ESR_EL1, 		HFGxTR, ESR_EL1, 1),
-	SR_FGT(SYS_DCZID_EL0, 		HFGxTR, DCZID_EL0, 1),
-	SR_FGT(SYS_CTR_EL0, 		HFGxTR, CTR_EL0, 1),
-	SR_FGT(SYS_CSSELR_EL1, 		HFGxTR, CSSELR_EL1, 1),
-	SR_FGT(SYS_CPACR_EL1, 		HFGxTR, CPACR_EL1, 1),
-	SR_FGT(SYS_CONTEXTIDR_EL1, 	HFGxTR, CONTEXTIDR_EL1, 1),
-	SR_FGT(SYS_CLIDR_EL1, 		HFGxTR, CLIDR_EL1, 1),
-	SR_FGT(SYS_CCSIDR_EL1, 		HFGxTR, CCSIDR_EL1, 1),
-	SR_FGT(SYS_APIBKEYLO_EL1, 	HFGxTR, APIBKey, 1),
-	SR_FGT(SYS_APIBKEYHI_EL1, 	HFGxTR, APIBKey, 1),
-	SR_FGT(SYS_APIAKEYLO_EL1, 	HFGxTR, APIAKey, 1),
-	SR_FGT(SYS_APIAKEYHI_EL1, 	HFGxTR, APIAKey, 1),
-	SR_FGT(SYS_APGAKEYLO_EL1, 	HFGxTR, APGAKey, 1),
-	SR_FGT(SYS_APGAKEYHI_EL1, 	HFGxTR, APGAKey, 1),
-	SR_FGT(SYS_APDBKEYLO_EL1, 	HFGxTR, APDBKey, 1),
-	SR_FGT(SYS_APDBKEYHI_EL1, 	HFGxTR, APDBKey, 1),
-	SR_FGT(SYS_APDAKEYLO_EL1, 	HFGxTR, APDAKey, 1),
-	SR_FGT(SYS_APDAKEYHI_EL1, 	HFGxTR, APDAKey, 1),
-	SR_FGT(SYS_AMAIR_EL1, 		HFGxTR, AMAIR_EL1, 1),
-	SR_FGT(SYS_AIDR_EL1, 		HFGxTR, AIDR_EL1, 1),
-	SR_FGT(SYS_AFSR1_EL1, 		HFGxTR, AFSR1_EL1, 1),
-	SR_FGT(SYS_AFSR0_EL1, 		HFGxTR, AFSR0_EL1, 1),
+	SR_FGT(SYS_AMAIR2_EL1,		HFGRTR, nAMAIR2_EL1, 0),
+	SR_FGT(SYS_MAIR2_EL1,		HFGRTR, nMAIR2_EL1, 0),
+	SR_FGT(SYS_S2POR_EL1,		HFGRTR, nS2POR_EL1, 0),
+	SR_FGT(SYS_POR_EL1,		HFGRTR, nPOR_EL1, 0),
+	SR_FGT(SYS_POR_EL0,		HFGRTR, nPOR_EL0, 0),
+	SR_FGT(SYS_PIR_EL1,		HFGRTR, nPIR_EL1, 0),
+	SR_FGT(SYS_PIRE0_EL1,		HFGRTR, nPIRE0_EL1, 0),
+	SR_FGT(SYS_RCWMASK_EL1,		HFGRTR, nRCWMASK_EL1, 0),
+	SR_FGT(SYS_TPIDR2_EL0,		HFGRTR, nTPIDR2_EL0, 0),
+	SR_FGT(SYS_SMPRI_EL1,		HFGRTR, nSMPRI_EL1, 0),
+	SR_FGT(SYS_GCSCR_EL1,		HFGRTR, nGCS_EL1, 0),
+	SR_FGT(SYS_GCSPR_EL1,		HFGRTR, nGCS_EL1, 0),
+	SR_FGT(SYS_GCSCRE0_EL1,		HFGRTR, nGCS_EL0, 0),
+	SR_FGT(SYS_GCSPR_EL0,		HFGRTR, nGCS_EL0, 0),
+	SR_FGT(SYS_ACCDATA_EL1,		HFGRTR, nACCDATA_EL1, 0),
+	SR_FGT(SYS_ERXADDR_EL1,		HFGRTR, ERXADDR_EL1, 1),
+	SR_FGT(SYS_ERXPFGCDN_EL1,	HFGRTR, ERXPFGCDN_EL1, 1),
+	SR_FGT(SYS_ERXPFGCTL_EL1,	HFGRTR, ERXPFGCTL_EL1, 1),
+	SR_FGT(SYS_ERXPFGF_EL1,		HFGRTR, ERXPFGF_EL1, 1),
+	SR_FGT(SYS_ERXMISC0_EL1,	HFGRTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXMISC1_EL1,	HFGRTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXMISC2_EL1,	HFGRTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXMISC3_EL1,	HFGRTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXSTATUS_EL1,	HFGRTR, ERXSTATUS_EL1, 1),
+	SR_FGT(SYS_ERXCTLR_EL1,		HFGRTR, ERXCTLR_EL1, 1),
+	SR_FGT(SYS_ERXFR_EL1,		HFGRTR, ERXFR_EL1, 1),
+	SR_FGT(SYS_ERRSELR_EL1,		HFGRTR, ERRSELR_EL1, 1),
+	SR_FGT(SYS_ERRIDR_EL1,		HFGRTR, ERRIDR_EL1, 1),
+	SR_FGT(SYS_ICC_IGRPEN0_EL1,	HFGRTR, ICC_IGRPENn_EL1, 1),
+	SR_FGT(SYS_ICC_IGRPEN1_EL1,	HFGRTR, ICC_IGRPENn_EL1, 1),
+	SR_FGT(SYS_VBAR_EL1,		HFGRTR, VBAR_EL1, 1),
+	SR_FGT(SYS_TTBR1_EL1,		HFGRTR, TTBR1_EL1, 1),
+	SR_FGT(SYS_TTBR0_EL1,		HFGRTR, TTBR0_EL1, 1),
+	SR_FGT(SYS_TPIDR_EL0,		HFGRTR, TPIDR_EL0, 1),
+	SR_FGT(SYS_TPIDRRO_EL0,		HFGRTR, TPIDRRO_EL0, 1),
+	SR_FGT(SYS_TPIDR_EL1,		HFGRTR, TPIDR_EL1, 1),
+	SR_FGT(SYS_TCR_EL1,		HFGRTR, TCR_EL1, 1),
+	SR_FGT(SYS_TCR2_EL1,		HFGRTR, TCR_EL1, 1),
+	SR_FGT(SYS_SCXTNUM_EL0,		HFGRTR, SCXTNUM_EL0, 1),
+	SR_FGT(SYS_SCXTNUM_EL1, 	HFGRTR, SCXTNUM_EL1, 1),
+	SR_FGT(SYS_SCTLR_EL1, 		HFGRTR, SCTLR_EL1, 1),
+	SR_FGT(SYS_SCTLR2_EL1,		HFGRTR, SCTLR_EL1, 1),
+	SR_FGT(SYS_REVIDR_EL1, 		HFGRTR, REVIDR_EL1, 1),
+	SR_FGT(SYS_PAR_EL1, 		HFGRTR, PAR_EL1, 1),
+	SR_FGT(SYS_MPIDR_EL1, 		HFGRTR, MPIDR_EL1, 1),
+	SR_FGT(SYS_MIDR_EL1, 		HFGRTR, MIDR_EL1, 1),
+	SR_FGT(SYS_MAIR_EL1, 		HFGRTR, MAIR_EL1, 1),
+	SR_FGT(SYS_LORSA_EL1, 		HFGRTR, LORSA_EL1, 1),
+	SR_FGT(SYS_LORN_EL1, 		HFGRTR, LORN_EL1, 1),
+	SR_FGT(SYS_LORID_EL1, 		HFGRTR, LORID_EL1, 1),
+	SR_FGT(SYS_LOREA_EL1, 		HFGRTR, LOREA_EL1, 1),
+	SR_FGT(SYS_LORC_EL1, 		HFGRTR, LORC_EL1, 1),
+	SR_FGT(SYS_ISR_EL1, 		HFGRTR, ISR_EL1, 1),
+	SR_FGT(SYS_FAR_EL1, 		HFGRTR, FAR_EL1, 1),
+	SR_FGT(SYS_ESR_EL1, 		HFGRTR, ESR_EL1, 1),
+	SR_FGT(SYS_DCZID_EL0, 		HFGRTR, DCZID_EL0, 1),
+	SR_FGT(SYS_CTR_EL0, 		HFGRTR, CTR_EL0, 1),
+	SR_FGT(SYS_CSSELR_EL1, 		HFGRTR, CSSELR_EL1, 1),
+	SR_FGT(SYS_CPACR_EL1, 		HFGRTR, CPACR_EL1, 1),
+	SR_FGT(SYS_CONTEXTIDR_EL1, 	HFGRTR, CONTEXTIDR_EL1, 1),
+	SR_FGT(SYS_CLIDR_EL1, 		HFGRTR, CLIDR_EL1, 1),
+	SR_FGT(SYS_CCSIDR_EL1, 		HFGRTR, CCSIDR_EL1, 1),
+	SR_FGT(SYS_APIBKEYLO_EL1, 	HFGRTR, APIBKey, 1),
+	SR_FGT(SYS_APIBKEYHI_EL1, 	HFGRTR, APIBKey, 1),
+	SR_FGT(SYS_APIAKEYLO_EL1, 	HFGRTR, APIAKey, 1),
+	SR_FGT(SYS_APIAKEYHI_EL1, 	HFGRTR, APIAKey, 1),
+	SR_FGT(SYS_APGAKEYLO_EL1, 	HFGRTR, APGAKey, 1),
+	SR_FGT(SYS_APGAKEYHI_EL1, 	HFGRTR, APGAKey, 1),
+	SR_FGT(SYS_APDBKEYLO_EL1, 	HFGRTR, APDBKey, 1),
+	SR_FGT(SYS_APDBKEYHI_EL1, 	HFGRTR, APDBKey, 1),
+	SR_FGT(SYS_APDAKEYLO_EL1, 	HFGRTR, APDAKey, 1),
+	SR_FGT(SYS_APDAKEYHI_EL1, 	HFGRTR, APDAKey, 1),
+	SR_FGT(SYS_AMAIR_EL1, 		HFGRTR, AMAIR_EL1, 1),
+	SR_FGT(SYS_AIDR_EL1, 		HFGRTR, AIDR_EL1, 1),
+	SR_FGT(SYS_AFSR1_EL1, 		HFGRTR, AFSR1_EL1, 1),
+	SR_FGT(SYS_AFSR0_EL1, 		HFGRTR, AFSR0_EL1, 1),
+
+	/* HFGRTR2_EL2, HFGWTR2_EL2 */
+	SR_FGT(SYS_ACTLRALIAS_EL1,	HFGRTR2, nACTLRALIAS_EL1, 0),
+	SR_FGT(SYS_ACTLRMASK_EL1,	HFGRTR2, nACTLRMASK_EL1, 0),
+	SR_FGT(SYS_CPACRALIAS_EL1,	HFGRTR2, nCPACRALIAS_EL1, 0),
+	SR_FGT(SYS_CPACRMASK_EL1,	HFGRTR2, nCPACRMASK_EL1, 0),
+	SR_FGT(SYS_PFAR_EL1,		HFGRTR2, nPFAR_EL1, 0),
+	SR_FGT(SYS_RCWSMASK_EL1,	HFGRTR2, nRCWSMASK_EL1, 0),
+	SR_FGT(SYS_SCTLR2ALIAS_EL1,	HFGRTR2, nSCTLRALIAS2_EL1, 0),
+	SR_FGT(SYS_SCTLR2MASK_EL1,	HFGRTR2, nSCTLR2MASK_EL1, 0),
+	SR_FGT(SYS_SCTLRALIAS_EL1,	HFGRTR2, nSCTLRALIAS_EL1, 0),
+	SR_FGT(SYS_SCTLRMASK_EL1,	HFGRTR2, nSCTLRMASK_EL1, 0),
+	SR_FGT(SYS_TCR2ALIAS_EL1,	HFGRTR2, nTCR2ALIAS_EL1, 0),
+	SR_FGT(SYS_TCR2MASK_EL1,	HFGRTR2, nTCR2MASK_EL1, 0),
+	SR_FGT(SYS_TCRALIAS_EL1,	HFGRTR2, nTCRALIAS_EL1, 0),
+	SR_FGT(SYS_TCRMASK_EL1,		HFGRTR2, nTCRMASK_EL1, 0),
+	SR_FGT(SYS_ERXGSR_EL1,		HFGRTR2, nERXGSR_EL1, 0),
+
 	/* HFGITR_EL2 */
 	SR_FGT(OP_AT_S1E1A, 		HFGITR, ATS1E1A, 1),
 	SR_FGT(OP_COSP_RCTX, 		HFGITR, COSPRCTX, 1),
@@ -1426,6 +1528,11 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_IC_IVAU, 		HFGITR, ICIVAU, 1),
 	SR_FGT(SYS_IC_IALLU, 		HFGITR, ICIALLU, 1),
 	SR_FGT(SYS_IC_IALLUIS, 		HFGITR, ICIALLUIS, 1),
+
+	/* HFGITR2_EL2 */
+	SR_FGT(SYS_DC_CIGDVAPS,		HFGITR2, nDCCIVAPS, 0),
+	SR_FGT(SYS_DC_CIVAPS,		HFGITR2, nDCCIVAPS, 0),
+
 	/* HDFGRTR_EL2 */
 	SR_FGT(SYS_PMBIDR_EL1, 		HDFGRTR, PMBIDR_EL1, 1),
 	SR_FGT(SYS_PMSNEVFR_EL1, 	HDFGRTR, nPMSNEVFR_EL1, 0),
@@ -1735,68 +1842,12 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_PMCNTENSET_EL0, 	HDFGRTR, PMCNTEN, 1),
 	SR_FGT(SYS_PMCCNTR_EL0, 	HDFGRTR, PMCCNTR_EL0, 1),
 	SR_FGT(SYS_PMCCFILTR_EL0, 	HDFGRTR, PMCCFILTR_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(0), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(1), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(2), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(3), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(4), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(5), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(6), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(7), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(8), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(9), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(10), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(11), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(12), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(13), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(14), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(15), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(16), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(17), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(18), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(19), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(20), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(21), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(22), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(23), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(24), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(25), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(26), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(27), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(28), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(29), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVTYPERn_EL0(30), 	HDFGRTR, PMEVTYPERn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(0), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(1), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(2), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(3), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(4), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(5), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(6), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(7), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(8), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(9), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(10), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(11), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(12), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(13), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(14), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(15), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(16), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(17), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(18), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(19), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(20), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(21), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(22), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(23), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(24), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(25), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(26), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(27), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(28), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(29), 	HDFGRTR, PMEVCNTRn_EL0, 1),
-	SR_FGT(SYS_PMEVCNTRn_EL0(30), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT_RANGE(SYS_PMEVTYPERn_EL0(0),
+		     SYS_PMEVTYPERn_EL0(30),
+		     HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT_RANGE(SYS_PMEVCNTRn_EL0(0),
+		     SYS_PMEVCNTRn_EL0(30),
+		     HDFGRTR, PMEVCNTRn_EL0, 1),
 	SR_FGT(SYS_OSDLR_EL1, 		HDFGRTR, OSDLR_EL1, 1),
 	SR_FGT(SYS_OSECCR_EL1, 		HDFGRTR, OSECCR_EL1, 1),
 	SR_FGT(SYS_OSLSR_EL1, 		HDFGRTR, OSLSR_EL1, 1),
@@ -1874,6 +1925,59 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_DBGBCRn_EL1(13), 	HDFGRTR, DBGBCRn_EL1, 1),
 	SR_FGT(SYS_DBGBCRn_EL1(14), 	HDFGRTR, DBGBCRn_EL1, 1),
 	SR_FGT(SYS_DBGBCRn_EL1(15), 	HDFGRTR, DBGBCRn_EL1, 1),
+
+	/* HDFGRTR2_EL2 */
+	SR_FGT(SYS_MDSELR_EL1,		HDFGRTR2, nMDSELR_EL1, 0),
+	SR_FGT(SYS_MDSTEPOP_EL1,	HDFGRTR2, nMDSTEPOP_EL1, 0),
+	SR_FGT(SYS_PMCCNTSVR_EL1,	HDFGRTR2, nPMSSDATA, 0),
+	SR_FGT_RANGE(SYS_PMEVCNTSVRn_EL1(0),
+		     SYS_PMEVCNTSVRn_EL1(30),
+		     HDFGRTR2, nPMSSDATA, 0),
+	SR_FGT(SYS_PMICNTSVR_EL1,	HDFGRTR2, nPMSSDATA, 0),
+	SR_FGT(SYS_PMECR_EL1,		HDFGRTR2, nPMECR_EL1, 0),
+	SR_FGT(SYS_PMIAR_EL1,		HDFGRTR2, nPMIAR_EL1, 0),
+	SR_FGT(SYS_PMICFILTR_EL0,	HDFGRTR2, nPMICFILTR_EL0, 0),
+	SR_FGT(SYS_PMICNTR_EL0,		HDFGRTR2, nPMICNTR_EL0, 0),
+	SR_FGT(SYS_PMSSCR_EL1,		HDFGRTR2, nPMSSCR_EL1, 0),
+	SR_FGT(SYS_PMUACR_EL1,		HDFGRTR2, nPMUACR_EL1, 0),
+	SR_FGT(SYS_SPMACCESSR_EL1,	HDFGRTR2, nSPMACCESSR_EL1, 0),
+	SR_FGT(SYS_SPMCFGR_EL1,		HDFGRTR2, nSPMID, 0),
+	SR_FGT(SYS_SPMDEVARCH_EL1,	HDFGRTR2, nSPMID, 0),
+	SR_FGT(SYS_SPMCGCRn_EL1(0),	HDFGRTR2, nSPMID, 0),
+	SR_FGT(SYS_SPMCGCRn_EL1(1),	HDFGRTR2, nSPMID, 0),
+	SR_FGT(SYS_SPMIIDR_EL1,		HDFGRTR2, nSPMID, 0),
+	SR_FGT(SYS_SPMCNTENCLR_EL0,	HDFGRTR2, nSPMCNTEN, 0),
+	SR_FGT(SYS_SPMCNTENSET_EL0,	HDFGRTR2, nSPMCNTEN, 0),
+	SR_FGT(SYS_SPMCR_EL0,		HDFGRTR2, nSPMCR_EL0, 0),
+	SR_FGT(SYS_SPMDEVAFF_EL1,	HDFGRTR2, nSPMDEVAFF_EL1, 0),
+	/*
+	 * We have up to 64 of these registers in ranges of 16, banked via
+	 * SPMSELR_EL0.BANK. We're only concerned with the accessors here,
+	 * not the architectural registers.
+	 */
+	SR_FGT_RANGE(SYS_SPMEVCNTRn_EL0(0),
+		     SYS_SPMEVCNTRn_EL0(15),
+		     HDFGRTR2, nSPMEVCNTRn_EL0, 0),
+	SR_FGT_RANGE(SYS_SPMEVFILT2Rn_EL0(0),
+		     SYS_SPMEVFILT2Rn_EL0(15),
+		     HDFGRTR2, nSPMEVTYPERn_EL0, 0),
+	SR_FGT_RANGE(SYS_SPMEVFILTRn_EL0(0),
+		     SYS_SPMEVFILTRn_EL0(15),
+		     HDFGRTR2, nSPMEVTYPERn_EL0, 0),
+	SR_FGT_RANGE(SYS_SPMEVTYPERn_EL0(0),
+		     SYS_SPMEVTYPERn_EL0(15),
+		     HDFGRTR2, nSPMEVTYPERn_EL0, 0),
+	SR_FGT(SYS_SPMINTENCLR_EL1,	HDFGRTR2, nSPMINTEN, 0),
+	SR_FGT(SYS_SPMINTENSET_EL1,	HDFGRTR2, nSPMINTEN, 0),
+	SR_FGT(SYS_SPMOVSCLR_EL0,	HDFGRTR2, nSPMOVS, 0),
+	SR_FGT(SYS_SPMOVSSET_EL0,	HDFGRTR2, nSPMOVS, 0),
+	SR_FGT(SYS_SPMSCR_EL1,		HDFGRTR2, nSPMSCR_EL1, 0),
+	SR_FGT(SYS_SPMSELR_EL0,		HDFGRTR2, nSPMSELR_EL0, 0),
+	SR_FGT(SYS_TRCITECR_EL1,	HDFGRTR2, nTRCITECR_EL1, 0),
+	SR_FGT(SYS_PMBMAR_EL1,		HDFGRTR2, nPMBMAR_EL1, 0),
+	SR_FGT(SYS_PMSDSFR_EL1,		HDFGRTR2, nPMSDSFR_EL1, 0),
+	SR_FGT(SYS_TRBMPAM_EL1,		HDFGRTR2, nTRBMPAM_EL1, 0),
+
 	/*
 	 * HDFGWTR_EL2
 	 *
@@ -1884,12 +1988,19 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	 * read-side mappings, and only the write-side mappings that
 	 * differ from the read side, and the trap handler will pick
 	 * the correct shadow register based on the access type.
+	 *
+	 * Same model applies to the FEAT_FGT2 registers.
 	 */
 	SR_FGT(SYS_TRFCR_EL1,		HDFGWTR, TRFCR_EL1, 1),
 	SR_FGT(SYS_TRCOSLAR,		HDFGWTR, TRCOSLAR, 1),
 	SR_FGT(SYS_PMCR_EL0,		HDFGWTR, PMCR_EL0, 1),
 	SR_FGT(SYS_PMSWINC_EL0,		HDFGWTR, PMSWINC_EL0, 1),
 	SR_FGT(SYS_OSLAR_EL1,		HDFGWTR, OSLAR_EL1, 1),
+
+	/* HDFGWTR2_EL2 */
+	SR_FGT(SYS_PMZR_EL0,		HDFGWTR2, nPMZR_EL0, 0),
+	SR_FGT(SYS_SPMZR_EL0,		HDFGWTR2, nSPMEVCNTRn_EL0, 0),
+
 	/*
 	 * HAFGRTR_EL2
 	 */
@@ -1935,6 +2046,20 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_AMEVCNTR0_EL0(0),	HAFGRTR, AMEVCNTR00_EL0, 1),
 };
 
+/*
+ * Additional FGTs that do not fire with ESR_EL2.EC==0x18. This table
+ * isn't used for exception routing, but only as a promise that the
+ * trap is handled somewhere else.
+ */
+static const union trap_config non_0x18_fgt[] __initconst = {
+	FGT(HFGITR, PSBCSYNC, 1),
+	FGT(HFGITR, nGCSSTR_EL1, 0),
+	FGT(HFGITR, SVC_EL1, 1),
+	FGT(HFGITR, SVC_EL0, 1),
+	FGT(HFGITR, ERET, 1),
+	FGT(HFGITR2, TSBCSYNC, 1),
+};
+
 static union trap_config get_trap_config(u32 sysreg)
 {
 	return (union trap_config) {
@@ -1979,6 +2104,130 @@ static u32 encoding_next(u32 encoding)
 	return sys_reg(op0 + 1, 0, 0, 0, 0);
 }
 
+#define FGT_MASKS(__n, __m)						\
+	struct fgt_masks __n = { .str = #__m, .res0 = __m, }
+
+FGT_MASKS(hfgrtr_masks, HFGRTR_EL2_RES0);
+FGT_MASKS(hfgwtr_masks, HFGWTR_EL2_RES0);
+FGT_MASKS(hfgitr_masks, HFGITR_EL2_RES0);
+FGT_MASKS(hdfgrtr_masks, HDFGRTR_EL2_RES0);
+FGT_MASKS(hdfgwtr_masks, HDFGWTR_EL2_RES0);
+FGT_MASKS(hafgrtr_masks, HAFGRTR_EL2_RES0);
+FGT_MASKS(hfgrtr2_masks, HFGRTR2_EL2_RES0);
+FGT_MASKS(hfgwtr2_masks, HFGWTR2_EL2_RES0);
+FGT_MASKS(hfgitr2_masks, HFGITR2_EL2_RES0);
+FGT_MASKS(hdfgrtr2_masks, HDFGRTR2_EL2_RES0);
+FGT_MASKS(hdfgwtr2_masks, HDFGWTR2_EL2_RES0);
+
+static __init bool aggregate_fgt(union trap_config tc)
+{
+	struct fgt_masks *rmasks, *wmasks;
+
+	switch (tc.fgt) {
+	case HFGRTR_GROUP:
+		rmasks = &hfgrtr_masks;
+		wmasks = &hfgwtr_masks;
+		break;
+	case HDFGRTR_GROUP:
+		rmasks = &hdfgrtr_masks;
+		wmasks = &hdfgwtr_masks;
+		break;
+	case HAFGRTR_GROUP:
+		rmasks = &hafgrtr_masks;
+		wmasks = NULL;
+		break;
+	case HFGITR_GROUP:
+		rmasks = &hfgitr_masks;
+		wmasks = NULL;
+		break;
+	case HFGRTR2_GROUP:
+		rmasks = &hfgrtr2_masks;
+		wmasks = &hfgwtr2_masks;
+		break;
+	case HDFGRTR2_GROUP:
+		rmasks = &hdfgrtr2_masks;
+		wmasks = &hdfgwtr2_masks;
+		break;
+	case HFGITR2_GROUP:
+		rmasks = &hfgitr2_masks;
+		wmasks = NULL;
+		break;
+	}
+
+	/*
+	 * A bit can be reserved in either the R or W register, but
+	 * not both.
+	 */
+	if ((BIT(tc.bit) & rmasks->res0) &&
+	    (!wmasks || (BIT(tc.bit) & wmasks->res0)))
+		return false;
+
+	if (tc.pol)
+		rmasks->mask |= BIT(tc.bit) & ~rmasks->res0;
+	else
+		rmasks->nmask |= BIT(tc.bit) & ~rmasks->res0;
+
+	if (wmasks) {
+		if (tc.pol)
+			wmasks->mask |= BIT(tc.bit) & ~wmasks->res0;
+		else
+			wmasks->nmask |= BIT(tc.bit) & ~wmasks->res0;
+	}
+
+	return true;
+}
+
+static __init int check_fgt_masks(struct fgt_masks *masks)
+{
+	unsigned long duplicate = masks->mask & masks->nmask;
+	u64 res0 = masks->res0;
+	int ret = 0;
+
+	if (duplicate) {
+		int i;
+
+		for_each_set_bit(i, &duplicate, 64) {
+			kvm_err("%s[%d] bit has both polarities\n",
+				masks->str, i);
+		}
+
+		ret = -EINVAL;
+	}
+
+	masks->res0 = ~(masks->mask | masks->nmask);
+	if (masks->res0 != res0)
+		kvm_info("Implicit %s = %016llx, expecting %016llx\n",
+			 masks->str, masks->res0, res0);
+
+	return ret;
+}
+
+static __init int check_all_fgt_masks(int ret)
+{
+	static struct fgt_masks * const masks[] __initconst = {
+		&hfgrtr_masks,
+		&hfgwtr_masks,
+		&hfgitr_masks,
+		&hdfgrtr_masks,
+		&hdfgwtr_masks,
+		&hafgrtr_masks,
+		&hfgrtr2_masks,
+		&hfgwtr2_masks,
+		&hfgitr2_masks,
+		&hdfgrtr2_masks,
+		&hdfgwtr2_masks,
+	};
+	int err = 0;
+
+	for (int i = 0; i < ARRAY_SIZE(masks); i++)
+		err |= check_fgt_masks(masks[i]);
+
+	return ret ?: err;
+}
+
+#define for_each_encoding_in(__x, __s, __e)	\
+	for (u32 __x = __s; __x <= __e; __x = encoding_next(__x))
+
 int __init populate_nv_trap_config(void)
 {
 	int ret = 0;
@@ -1987,6 +2236,7 @@ int __init populate_nv_trap_config(void)
 	BUILD_BUG_ON(__NR_CGT_GROUP_IDS__ > BIT(TC_CGT_BITS));
 	BUILD_BUG_ON(__NR_FGT_GROUP_IDS__ > BIT(TC_FGT_BITS));
 	BUILD_BUG_ON(__NR_FG_FILTER_IDS__ > BIT(TC_FGF_BITS));
+	BUILD_BUG_ON(__HCRX_EL2_MASK & __HCRX_EL2_nMASK);
 
 	for (int i = 0; i < ARRAY_SIZE(encoding_to_cgt); i++) {
 		const struct encoding_to_trap_config *cgt = &encoding_to_cgt[i];
@@ -1997,7 +2247,7 @@ int __init populate_nv_trap_config(void)
 			ret = -EINVAL;
 		}
 
-		for (u32 enc = cgt->encoding; enc <= cgt->end; enc = encoding_next(enc)) {
+		for_each_encoding_in(enc, cgt->encoding, cgt->end) {
 			prev = xa_store(&sr_forward_xa, enc,
 					xa_mk_value(cgt->tc.val), GFP_KERNEL);
 			if (prev && !xa_is_err(prev)) {
@@ -2012,6 +2262,10 @@ int __init populate_nv_trap_config(void)
 		}
 	}
 
+	if (__HCRX_EL2_RES0 != HCRX_EL2_RES0)
+		kvm_info("Sanitised HCR_EL2_RES0 = %016llx, expecting %016llx\n",
+			 __HCRX_EL2_RES0, HCRX_EL2_RES0);
+
 	kvm_info("nv: %ld coarse grained trap handlers\n",
 		 ARRAY_SIZE(encoding_to_cgt));
 
@@ -2028,23 +2282,39 @@ int __init populate_nv_trap_config(void)
 			print_nv_trap_error(fgt, "Invalid FGT", ret);
 		}
 
-		tc = get_trap_config(fgt->encoding);
+		for_each_encoding_in(enc, fgt->encoding, fgt->end) {
+			tc = get_trap_config(enc);
 
-		if (tc.fgt) {
-			ret = -EINVAL;
-			print_nv_trap_error(fgt, "Duplicate FGT", ret);
-		}
+			if (tc.fgt) {
+				ret = -EINVAL;
+				print_nv_trap_error(fgt, "Duplicate FGT", ret);
+			}
+
+			tc.val |= fgt->tc.val;
+			prev = xa_store(&sr_forward_xa, enc,
+					xa_mk_value(tc.val), GFP_KERNEL);
+
+			if (xa_is_err(prev)) {
+				ret = xa_err(prev);
+				print_nv_trap_error(fgt, "Failed FGT insertion", ret);
+			}
 
-		tc.val |= fgt->tc.val;
-		prev = xa_store(&sr_forward_xa, fgt->encoding,
-				xa_mk_value(tc.val), GFP_KERNEL);
+			if (!aggregate_fgt(tc)) {
+				ret = -EINVAL;
+				print_nv_trap_error(fgt, "FGT bit is reserved", ret);
+			}
+		}
+	}
 
-		if (xa_is_err(prev)) {
-			ret = xa_err(prev);
-			print_nv_trap_error(fgt, "Failed FGT insertion", ret);
+	for (int i = 0; i < ARRAY_SIZE(non_0x18_fgt); i++) {
+		if (!aggregate_fgt(non_0x18_fgt[i])) {
+			ret = -EINVAL;
+			kvm_err("non_0x18_fgt[%d] is reserved\n", i);
 		}
 	}
 
+	ret = check_all_fgt_masks(ret);
+
 	kvm_info("nv: %ld fine grained trap handlers\n",
 		 ARRAY_SIZE(encoding_to_fgt));
 
@@ -2161,11 +2431,11 @@ static u64 kvm_get_sysreg_res0(struct kvm *kvm, enum vcpu_sysreg sr)
 	return masks->mask[sr - __VNCR_START__].res0;
 }
 
-static bool check_fgt_bit(struct kvm_vcpu *vcpu, bool is_read,
-			  u64 val, const union trap_config tc)
+static bool check_fgt_bit(struct kvm_vcpu *vcpu, enum vcpu_sysreg sr,
+			  const union trap_config tc)
 {
 	struct kvm *kvm = vcpu->kvm;
-	enum vcpu_sysreg sr;
+	u64 val;
 
 	/*
 	 * KVM doesn't know about any FGTs that apply to the host, and hopefully
@@ -2174,6 +2444,8 @@ static bool check_fgt_bit(struct kvm_vcpu *vcpu, bool is_read,
 	if (is_hyp_ctxt(vcpu))
 		return false;
 
+	val = __vcpu_sys_reg(vcpu, sr);
+
 	if (tc.pol)
 		return (val & BIT(tc.bit));
 
@@ -2188,38 +2460,17 @@ static bool check_fgt_bit(struct kvm_vcpu *vcpu, bool is_read,
 	if (val & BIT(tc.bit))
 		return false;
 
-	switch ((enum fgt_group_id)tc.fgt) {
-	case HFGxTR_GROUP:
-		sr = is_read ? HFGRTR_EL2 : HFGWTR_EL2;
-		break;
-
-	case HDFGRTR_GROUP:
-		sr = is_read ? HDFGRTR_EL2 : HDFGWTR_EL2;
-		break;
-
-	case HAFGRTR_GROUP:
-		sr = HAFGRTR_EL2;
-		break;
-
-	case HFGITR_GROUP:
-		sr = HFGITR_EL2;
-		break;
-
-	default:
-		WARN_ONCE(1, "Unhandled FGT group");
-		return false;
-	}
-
 	return !(kvm_get_sysreg_res0(kvm, sr) & BIT(tc.bit));
 }
 
 bool triage_sysreg_trap(struct kvm_vcpu *vcpu, int *sr_index)
 {
+	enum vcpu_sysreg fgtreg;
 	union trap_config tc;
 	enum trap_behaviour b;
 	bool is_read;
 	u32 sysreg;
-	u64 esr, val;
+	u64 esr;
 
 	esr = kvm_vcpu_get_esr(vcpu);
 	sysreg = esr_sys64_to_sysreg(esr);
@@ -2265,26 +2516,20 @@ bool triage_sysreg_trap(struct kvm_vcpu *vcpu, int *sr_index)
 	case __NO_FGT_GROUP__:
 		break;
 
-	case HFGxTR_GROUP:
-		if (is_read)
-			val = __vcpu_sys_reg(vcpu, HFGRTR_EL2);
-		else
-			val = __vcpu_sys_reg(vcpu, HFGWTR_EL2);
+	case HFGRTR_GROUP:
+		fgtreg = is_read ? HFGRTR_EL2 : HFGWTR_EL2;
 		break;
 
 	case HDFGRTR_GROUP:
-		if (is_read)
-			val = __vcpu_sys_reg(vcpu, HDFGRTR_EL2);
-		else
-			val = __vcpu_sys_reg(vcpu, HDFGWTR_EL2);
+		fgtreg = is_read ? HDFGRTR_EL2 : HDFGWTR_EL2;
 		break;
 
 	case HAFGRTR_GROUP:
-		val = __vcpu_sys_reg(vcpu, HAFGRTR_EL2);
+		fgtreg = HAFGRTR_EL2;
 		break;
 
 	case HFGITR_GROUP:
-		val = __vcpu_sys_reg(vcpu, HFGITR_EL2);
+		fgtreg = HFGITR_EL2;
 		switch (tc.fgf) {
 			u64 tmp;
 
@@ -2298,13 +2543,26 @@ bool triage_sysreg_trap(struct kvm_vcpu *vcpu, int *sr_index)
 		}
 		break;
 
-	case __NR_FGT_GROUP_IDS__:
+	case HFGRTR2_GROUP:
+		fgtreg = is_read ? HFGRTR2_EL2 : HFGWTR2_EL2;
+		break;
+
+	case HDFGRTR2_GROUP:
+		fgtreg = is_read ? HDFGRTR2_EL2 : HDFGWTR2_EL2;
+		break;
+
+	case HFGITR2_GROUP:
+		fgtreg = HFGITR2_EL2;
+		break;
+
+	default:
 		/* Something is really wrong, bail out */
-		WARN_ONCE(1, "__NR_FGT_GROUP_IDS__");
+		WARN_ONCE(1, "Bad FGT group (encoding %08x, config %016llx)\n",
+			  sysreg, tc.val);
 		goto local;
 	}
 
-	if (tc.fgt != __NO_FGT_GROUP__ && check_fgt_bit(vcpu, is_read, val, tc))
+	if (tc.fgt != __NO_FGT_GROUP__ && check_fgt_bit(vcpu, fgtreg, tc))
 		goto inject;
 
 	b = compute_trap_behaviour(vcpu, tc);
@@ -2345,24 +2603,34 @@ inject:
 	return true;
 }
 
-static bool forward_traps(struct kvm_vcpu *vcpu, u64 control_bit)
+static bool __forward_traps(struct kvm_vcpu *vcpu, unsigned int reg, u64 control_bit)
 {
-	bool control_bit_set;
-
-	if (!vcpu_has_nv(vcpu))
-		return false;
-
-	control_bit_set = __vcpu_sys_reg(vcpu, HCR_EL2) & control_bit;
-	if (!is_hyp_ctxt(vcpu) && control_bit_set) {
+	if (is_nested_ctxt(vcpu) &&
+	    (__vcpu_sys_reg(vcpu, reg) & control_bit)) {
 		kvm_inject_nested_sync(vcpu, kvm_vcpu_get_esr(vcpu));
 		return true;
 	}
 	return false;
 }
 
+static bool forward_hcr_traps(struct kvm_vcpu *vcpu, u64 control_bit)
+{
+	return __forward_traps(vcpu, HCR_EL2, control_bit);
+}
+
 bool forward_smc_trap(struct kvm_vcpu *vcpu)
 {
-	return forward_traps(vcpu, HCR_TSC);
+	return forward_hcr_traps(vcpu, HCR_TSC);
+}
+
+static bool forward_mdcr_traps(struct kvm_vcpu *vcpu, u64 control_bit)
+{
+	return __forward_traps(vcpu, MDCR_EL2, control_bit);
+}
+
+bool forward_debug_exception(struct kvm_vcpu *vcpu)
+{
+	return forward_mdcr_traps(vcpu, MDCR_EL2_TDE);
 }
 
 static u64 kvm_check_illegal_exception_return(struct kvm_vcpu *vcpu, u64 spsr)
@@ -2402,13 +2670,6 @@ void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu)
 {
 	u64 spsr, elr, esr;
 
-	/*
-	 * Forward this trap to the virtual EL2 if the virtual
-	 * HCR_EL2.NV bit is set and this is coming from !EL2.
-	 */
-	if (forward_traps(vcpu, HCR_NV))
-		return;
-
 	spsr = vcpu_read_sys_reg(vcpu, SPSR_EL2);
 	spsr = kvm_check_illegal_exception_return(vcpu, spsr);
 
@@ -2434,6 +2695,7 @@ void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu)
 	}
 
 	preempt_disable();
+	vcpu_set_flag(vcpu, IN_NESTED_ERET);
 	kvm_arch_vcpu_put(vcpu);
 
 	if (!esr_iss_is_eretax(esr))
@@ -2445,9 +2707,11 @@ void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu)
 	*vcpu_cpsr(vcpu) = spsr;
 
 	kvm_arch_vcpu_load(vcpu, smp_processor_id());
+	vcpu_clear_flag(vcpu, IN_NESTED_ERET);
 	preempt_enable();
 
-	kvm_pmu_nested_transition(vcpu);
+	if (kvm_vcpu_has_pmu(vcpu))
+		kvm_pmu_nested_transition(vcpu);
 }
 
 static void kvm_inject_el2_exception(struct kvm_vcpu *vcpu, u64 esr_el2,
@@ -2463,6 +2727,9 @@ static void kvm_inject_el2_exception(struct kvm_vcpu *vcpu, u64 esr_el2,
 	case except_type_irq:
 		kvm_pend_exception(vcpu, EXCEPT_AA64_EL2_IRQ);
 		break;
+	case except_type_serror:
+		kvm_pend_exception(vcpu, EXCEPT_AA64_EL2_SERR);
+		break;
 	default:
 		WARN_ONCE(1, "Unsupported EL2 exception injection %d\n", type);
 	}
@@ -2530,7 +2797,8 @@ static int kvm_inject_nested(struct kvm_vcpu *vcpu, u64 esr_el2,
 	kvm_arch_vcpu_load(vcpu, smp_processor_id());
 	preempt_enable();
 
-	kvm_pmu_nested_transition(vcpu);
+	if (kvm_vcpu_has_pmu(vcpu))
+		kvm_pmu_nested_transition(vcpu);
 
 	return 1;
 }
@@ -2559,3 +2827,28 @@ int kvm_inject_nested_irq(struct kvm_vcpu *vcpu)
 	/* esr_el2 value doesn't matter for exits due to irqs. */
 	return kvm_inject_nested(vcpu, 0, except_type_irq);
 }
+
+int kvm_inject_nested_sea(struct kvm_vcpu *vcpu, bool iabt, u64 addr)
+{
+	u64 esr = FIELD_PREP(ESR_ELx_EC_MASK,
+			     iabt ? ESR_ELx_EC_IABT_LOW : ESR_ELx_EC_DABT_LOW);
+	esr |= ESR_ELx_FSC_EXTABT | ESR_ELx_IL;
+
+	vcpu_write_sys_reg(vcpu, addr, FAR_EL2);
+
+	if (__vcpu_sys_reg(vcpu, SCTLR2_EL2) & SCTLR2_EL1_EASE)
+		return kvm_inject_nested(vcpu, esr, except_type_serror);
+
+	return kvm_inject_nested_sync(vcpu, esr);
+}
+
+int kvm_inject_nested_serror(struct kvm_vcpu *vcpu, u64 esr)
+{
+	/*
+	 * Hardware sets up the EC field when propagating ESR as a result of
+	 * vSError injection. Manually populate EC for an emulated SError
+	 * exception.
+	 */
+	esr |= FIELD_PREP(ESR_ELx_EC_MASK, ESR_ELx_EC_SERROR);
+	return kvm_inject_nested(vcpu, esr, except_type_serror);
+}
diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c
index ea5484ce1f3b..15e17aca1dec 100644
--- a/arch/arm64/kvm/fpsimd.c
+++ b/arch/arm64/kvm/fpsimd.c
@@ -15,32 +15,6 @@
 #include <asm/sysreg.h>
 
 /*
- * Called on entry to KVM_RUN unless this vcpu previously ran at least
- * once and the most recent prior KVM_RUN for this vcpu was called from
- * the same task as current (highly likely).
- *
- * This is guaranteed to execute before kvm_arch_vcpu_load_fp(vcpu),
- * such that on entering hyp the relevant parts of current are already
- * mapped.
- */
-int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu)
-{
-	struct user_fpsimd_state *fpsimd = &current->thread.uw.fpsimd_state;
-	int ret;
-
-	/* pKVM has its own tracking of the host fpsimd state. */
-	if (is_protected_kvm_enabled())
-		return 0;
-
-	/* Make sure the host task fpsimd state is visible to hyp: */
-	ret = kvm_share_hyp(fpsimd, fpsimd + 1);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-/*
  * Prepare vcpu for saving the host's FPSIMD state and loading the guest's.
  * The actual loading is done by the FPSIMD access trap taken to hyp.
  *
@@ -54,50 +28,18 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
 	if (!system_supports_fpsimd())
 		return;
 
-	fpsimd_kvm_prepare();
-
 	/*
-	 * We will check TIF_FOREIGN_FPSTATE just before entering the
-	 * guest in kvm_arch_vcpu_ctxflush_fp() and override this to
-	 * FP_STATE_FREE if the flag set.
+	 * Ensure that any host FPSIMD/SVE/SME state is saved and unbound such
+	 * that the host kernel is responsible for restoring this state upon
+	 * return to userspace, and the hyp code doesn't need to save anything.
+	 *
+	 * When the host may use SME, fpsimd_save_and_flush_cpu_state() ensures
+	 * that PSTATE.{SM,ZA} == {0,0}.
 	 */
-	*host_data_ptr(fp_owner) = FP_STATE_HOST_OWNED;
-	*host_data_ptr(fpsimd_state) = kern_hyp_va(&current->thread.uw.fpsimd_state);
-	*host_data_ptr(fpmr_ptr) = kern_hyp_va(&current->thread.uw.fpmr);
-
-	vcpu_clear_flag(vcpu, HOST_SVE_ENABLED);
-	if (read_sysreg(cpacr_el1) & CPACR_EL1_ZEN_EL0EN)
-		vcpu_set_flag(vcpu, HOST_SVE_ENABLED);
-
-	if (system_supports_sme()) {
-		vcpu_clear_flag(vcpu, HOST_SME_ENABLED);
-		if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN)
-			vcpu_set_flag(vcpu, HOST_SME_ENABLED);
-
-		/*
-		 * If PSTATE.SM is enabled then save any pending FP
-		 * state and disable PSTATE.SM. If we leave PSTATE.SM
-		 * enabled and the guest does not enable SME via
-		 * CPACR_EL1.SMEN then operations that should be valid
-		 * may generate SME traps from EL1 to EL1 which we
-		 * can't intercept and which would confuse the guest.
-		 *
-		 * Do the same for PSTATE.ZA in the case where there
-		 * is state in the registers which has not already
-		 * been saved, this is very unlikely to happen.
-		 */
-		if (read_sysreg_s(SYS_SVCR) & (SVCR_SM_MASK | SVCR_ZA_MASK)) {
-			*host_data_ptr(fp_owner) = FP_STATE_FREE;
-			fpsimd_save_and_flush_cpu_state();
-		}
-	}
+	fpsimd_save_and_flush_cpu_state();
+	*host_data_ptr(fp_owner) = FP_STATE_FREE;
 
-	/*
-	 * If normal guests gain SME support, maintain this behavior for pKVM
-	 * guests, which don't support SME.
-	 */
-	WARN_ON(is_protected_kvm_enabled() && system_supports_sme() &&
-		read_sysreg_s(SYS_SVCR));
+	WARN_ON_ONCE(system_supports_sme() && read_sysreg_s(SYS_SVCR));
 }
 
 /*
@@ -135,8 +77,8 @@ void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu)
 		fp_state.sve_state = vcpu->arch.sve_state;
 		fp_state.sve_vl = vcpu->arch.sve_max_vl;
 		fp_state.sme_state = NULL;
-		fp_state.svcr = &__vcpu_sys_reg(vcpu, SVCR);
-		fp_state.fpmr = &__vcpu_sys_reg(vcpu, FPMR);
+		fp_state.svcr = __ctxt_sys_reg(&vcpu->arch.ctxt, SVCR);
+		fp_state.fpmr = __ctxt_sys_reg(&vcpu->arch.ctxt, FPMR);
 		fp_state.fp_type = &vcpu->arch.fp_type;
 
 		if (vcpu_has_sve(vcpu))
@@ -162,52 +104,7 @@ void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu)
 
 	local_irq_save(flags);
 
-	/*
-	 * If we have VHE then the Hyp code will reset CPACR_EL1 to
-	 * the default value and we need to reenable SME.
-	 */
-	if (has_vhe() && system_supports_sme()) {
-		/* Also restore EL0 state seen on entry */
-		if (vcpu_get_flag(vcpu, HOST_SME_ENABLED))
-			sysreg_clear_set(CPACR_EL1, 0, CPACR_ELx_SMEN);
-		else
-			sysreg_clear_set(CPACR_EL1,
-					 CPACR_EL1_SMEN_EL0EN,
-					 CPACR_EL1_SMEN_EL1EN);
-		isb();
-	}
-
 	if (guest_owns_fp_regs()) {
-		if (vcpu_has_sve(vcpu)) {
-			u64 zcr = read_sysreg_el1(SYS_ZCR);
-
-			/*
-			 * If the vCPU is in the hyp context then ZCR_EL1 is
-			 * loaded with its vEL2 counterpart.
-			 */
-			__vcpu_sys_reg(vcpu, vcpu_sve_zcr_elx(vcpu)) = zcr;
-
-			/*
-			 * Restore the VL that was saved when bound to the CPU,
-			 * which is the maximum VL for the guest. Because the
-			 * layout of the data when saving the sve state depends
-			 * on the VL, we need to use a consistent (i.e., the
-			 * maximum) VL.
-			 * Note that this means that at guest exit ZCR_EL1 is
-			 * not necessarily the same as on guest entry.
-			 *
-			 * ZCR_EL2 holds the guest hypervisor's VL when running
-			 * a nested guest, which could be smaller than the
-			 * max for the vCPU. Similar to above, we first need to
-			 * switch to a VL consistent with the layout of the
-			 * vCPU's SVE state. KVM support for NV implies VHE, so
-			 * using the ZCR_EL1 alias is safe.
-			 */
-			if (!has_vhe() || (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu)))
-				sve_cond_update_zcr_vq(vcpu_sve_max_vq(vcpu) - 1,
-						       SYS_ZCR_EL1);
-		}
-
 		/*
 		 * Flush (save and invalidate) the fpsimd/sve state so that if
 		 * the host tries to use fpsimd/sve, it's not using stale data
@@ -219,18 +116,6 @@ void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu)
 		 * when needed.
 		 */
 		fpsimd_save_and_flush_cpu_state();
-	} else if (has_vhe() && system_supports_sve()) {
-		/*
-		 * The FPSIMD/SVE state in the CPU has not been touched, and we
-		 * have SVE (and VHE): CPACR_EL1 (alias CPTR_EL2) has been
-		 * reset by kvm_reset_cptr_el2() in the Hyp code, disabling SVE
-		 * for EL0.  To avoid spurious traps, restore the trap state
-		 * seen by kvm_arch_vcpu_load_fp():
-		 */
-		if (vcpu_get_flag(vcpu, HOST_SVE_ENABLED))
-			sysreg_clear_set(CPACR_EL1, 0, CPACR_EL1_ZEN_EL0EN);
-		else
-			sysreg_clear_set(CPACR_EL1, CPACR_EL1_ZEN_EL0EN, 0);
 	}
 
 	local_irq_restore(flags);
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index 12dad841f2a5..1c87699fd886 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -591,64 +591,6 @@ static unsigned long num_core_regs(const struct kvm_vcpu *vcpu)
 	return copy_core_reg_indices(vcpu, NULL);
 }
 
-static const u64 timer_reg_list[] = {
-	KVM_REG_ARM_TIMER_CTL,
-	KVM_REG_ARM_TIMER_CNT,
-	KVM_REG_ARM_TIMER_CVAL,
-	KVM_REG_ARM_PTIMER_CTL,
-	KVM_REG_ARM_PTIMER_CNT,
-	KVM_REG_ARM_PTIMER_CVAL,
-};
-
-#define NUM_TIMER_REGS ARRAY_SIZE(timer_reg_list)
-
-static bool is_timer_reg(u64 index)
-{
-	switch (index) {
-	case KVM_REG_ARM_TIMER_CTL:
-	case KVM_REG_ARM_TIMER_CNT:
-	case KVM_REG_ARM_TIMER_CVAL:
-	case KVM_REG_ARM_PTIMER_CTL:
-	case KVM_REG_ARM_PTIMER_CNT:
-	case KVM_REG_ARM_PTIMER_CVAL:
-		return true;
-	}
-	return false;
-}
-
-static int copy_timer_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
-{
-	for (int i = 0; i < NUM_TIMER_REGS; i++) {
-		if (put_user(timer_reg_list[i], uindices))
-			return -EFAULT;
-		uindices++;
-	}
-
-	return 0;
-}
-
-static int set_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
-{
-	void __user *uaddr = (void __user *)(long)reg->addr;
-	u64 val;
-	int ret;
-
-	ret = copy_from_user(&val, uaddr, KVM_REG_SIZE(reg->id));
-	if (ret != 0)
-		return -EFAULT;
-
-	return kvm_arm_timer_set_reg(vcpu, reg->id, val);
-}
-
-static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
-{
-	void __user *uaddr = (void __user *)(long)reg->addr;
-	u64 val;
-
-	val = kvm_arm_timer_get_reg(vcpu, reg->id);
-	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0;
-}
-
 static unsigned long num_sve_regs(const struct kvm_vcpu *vcpu)
 {
 	const unsigned int slices = vcpu_sve_slices(vcpu);
@@ -724,7 +666,6 @@ unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu)
 	res += num_sve_regs(vcpu);
 	res += kvm_arm_num_sys_reg_descs(vcpu);
 	res += kvm_arm_get_fw_num_regs(vcpu);
-	res += NUM_TIMER_REGS;
 
 	return res;
 }
@@ -755,11 +696,6 @@ int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
 		return ret;
 	uindices += kvm_arm_get_fw_num_regs(vcpu);
 
-	ret = copy_timer_indices(vcpu, uindices);
-	if (ret < 0)
-		return ret;
-	uindices += NUM_TIMER_REGS;
-
 	return kvm_arm_copy_sys_reg_indices(vcpu, uindices);
 }
 
@@ -777,9 +713,6 @@ int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	case KVM_REG_ARM64_SVE:	return get_sve_reg(vcpu, reg);
 	}
 
-	if (is_timer_reg(reg->id))
-		return get_timer_reg(vcpu, reg);
-
 	return kvm_arm_sys_reg_get_reg(vcpu, reg);
 }
 
@@ -797,9 +730,6 @@ int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	case KVM_REG_ARM64_SVE:	return set_sve_reg(vcpu, reg);
 	}
 
-	if (is_timer_reg(reg->id))
-		return set_timer_reg(vcpu, reg);
-
 	return kvm_arm_sys_reg_set_reg(vcpu, reg);
 }
 
@@ -818,8 +748,9 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
 			      struct kvm_vcpu_events *events)
 {
-	events->exception.serror_pending = !!(vcpu->arch.hcr_el2 & HCR_VSE);
 	events->exception.serror_has_esr = cpus_have_final_cap(ARM64_HAS_RAS_EXTN);
+	events->exception.serror_pending = (vcpu->arch.hcr_el2 & HCR_VSE) ||
+					   vcpu_get_flag(vcpu, NESTED_SERROR_PENDING);
 
 	if (events->exception.serror_pending && events->exception.serror_has_esr)
 		events->exception.serror_esr = vcpu_get_vsesr(vcpu);
@@ -833,29 +764,62 @@ int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+static void commit_pending_events(struct kvm_vcpu *vcpu)
+{
+	if (!vcpu_get_flag(vcpu, PENDING_EXCEPTION))
+		return;
+
+	/*
+	 * Reset the MMIO emulation state to avoid stepping PC after emulating
+	 * the exception entry.
+	 */
+	vcpu->mmio_needed = false;
+	kvm_call_hyp(__kvm_adjust_pc, vcpu);
+}
+
 int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 			      struct kvm_vcpu_events *events)
 {
 	bool serror_pending = events->exception.serror_pending;
 	bool has_esr = events->exception.serror_has_esr;
 	bool ext_dabt_pending = events->exception.ext_dabt_pending;
+	u64 esr = events->exception.serror_esr;
+	int ret = 0;
 
-	if (serror_pending && has_esr) {
-		if (!cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
-			return -EINVAL;
-
-		if (!((events->exception.serror_esr) & ~ESR_ELx_ISS_MASK))
-			kvm_set_sei_esr(vcpu, events->exception.serror_esr);
-		else
-			return -EINVAL;
-	} else if (serror_pending) {
-		kvm_inject_vabt(vcpu);
+	/*
+	 * Immediately commit the pending SEA to the vCPU's architectural
+	 * state which is necessary since we do not return a pending SEA
+	 * to userspace via KVM_GET_VCPU_EVENTS.
+	 */
+	if (ext_dabt_pending) {
+		ret = kvm_inject_sea_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
+		commit_pending_events(vcpu);
 	}
 
-	if (ext_dabt_pending)
-		kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
+	if (ret < 0)
+		return ret;
 
-	return 0;
+	if (!serror_pending)
+		return 0;
+
+	if (!cpus_have_final_cap(ARM64_HAS_RAS_EXTN) && has_esr)
+		return -EINVAL;
+
+	if (has_esr && (esr & ~ESR_ELx_ISS_MASK))
+		return -EINVAL;
+
+	if (has_esr)
+		ret = kvm_inject_serror_esr(vcpu, esr);
+	else
+		ret = kvm_inject_serror(vcpu);
+
+	/*
+	 * We could've decided that the SError is due for immediate software
+	 * injection; commit the exception in case userspace decides it wants
+	 * to inject more exceptions for some strange reason.
+	 */
+	commit_pending_events(vcpu);
+	return (ret < 0) ? ret : 0;
 }
 
 u32 __attribute_const__ kvm_target_cpu(void)
@@ -917,31 +881,24 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 					struct kvm_guest_debug *dbg)
 {
-	int ret = 0;
-
 	trace_kvm_set_guest_debug(vcpu, dbg->control);
 
-	if (dbg->control & ~KVM_GUESTDBG_VALID_MASK) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (dbg->control & KVM_GUESTDBG_ENABLE) {
-		vcpu->guest_debug = dbg->control;
-
-		/* Hardware assisted Break and Watch points */
-		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
-			vcpu->arch.external_debug_state = dbg->arch;
-		}
+	if (dbg->control & ~KVM_GUESTDBG_VALID_MASK)
+		return -EINVAL;
 
-	} else {
-		/* If not enabled clear all flags */
+	if (!(dbg->control & KVM_GUESTDBG_ENABLE)) {
 		vcpu->guest_debug = 0;
-		vcpu_clear_flag(vcpu, DBG_SS_ACTIVE_PENDING);
+		vcpu_clear_flag(vcpu, HOST_SS_ACTIVE_PENDING);
+		return 0;
 	}
 
-out:
-	return ret;
+	vcpu->guest_debug = dbg->control;
+
+	/* Hardware assisted Break and Watch points */
+	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW)
+		vcpu->arch.external_debug_state = dbg->arch;
+
+	return 0;
 }
 
 int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index d7c2990e7c9e..cc7d5d1709cb 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -10,6 +10,7 @@
 
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
+#include <linux/ubsan.h>
 
 #include <asm/esr.h>
 #include <asm/exception.h>
@@ -31,7 +32,7 @@ typedef int (*exit_handle_fn)(struct kvm_vcpu *);
 static void kvm_handle_guest_serror(struct kvm_vcpu *vcpu, u64 esr)
 {
 	if (!arm64_is_ras_serror(esr) || arm64_is_fatal_ras_serror(NULL, esr))
-		kvm_inject_vabt(vcpu);
+		kvm_inject_serror(vcpu);
 }
 
 static int handle_hvc(struct kvm_vcpu *vcpu)
@@ -129,8 +130,12 @@ static int kvm_handle_fpasimd(struct kvm_vcpu *vcpu)
 static int kvm_handle_wfx(struct kvm_vcpu *vcpu)
 {
 	u64 esr = kvm_vcpu_get_esr(vcpu);
+	bool is_wfe = !!(esr & ESR_ELx_WFx_ISS_WFE);
 
-	if (esr & ESR_ELx_WFx_ISS_WFE) {
+	if (guest_hyp_wfx_traps_enabled(vcpu))
+		return kvm_inject_nested_sync(vcpu, kvm_vcpu_get_esr(vcpu));
+
+	if (is_wfe) {
 		trace_kvm_wfx_arm64(*vcpu_pc(vcpu), true);
 		vcpu->stat.wfe_exit_stat++;
 	} else {
@@ -142,7 +147,12 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu)
 		if (esr & ESR_ELx_WFx_ISS_RV) {
 			u64 val, now;
 
-			now = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_TIMER_CNT);
+			now = kvm_phys_timer_read();
+			if (is_hyp_ctxt(vcpu) && vcpu_el2_e2h_is_set(vcpu))
+				now -= timer_get_offset(vcpu_hvtimer(vcpu));
+			else
+				now -= timer_get_offset(vcpu_vtimer(vcpu));
+
 			val = vcpu_get_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu));
 
 			if (now >= val)
@@ -183,6 +193,9 @@ static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu)
 	struct kvm_run *run = vcpu->run;
 	u64 esr = kvm_vcpu_get_esr(vcpu);
 
+	if (!vcpu->guest_debug && forward_debug_exception(vcpu))
+		return 1;
+
 	run->exit_reason = KVM_EXIT_DEBUG;
 	run->debug.arch.hsr = lower_32_bits(esr);
 	run->debug.arch.hsr_high = upper_32_bits(esr);
@@ -193,7 +206,7 @@ static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu)
 		run->debug.arch.far = vcpu->arch.fault.far_el2;
 		break;
 	case ESR_ELx_EC_SOFTSTP_LOW:
-		vcpu_clear_flag(vcpu, DBG_SS_ACTIVE_PENDING);
+		*vcpu_cpsr(vcpu) |= DBG_SPSR_SS;
 		break;
 	}
 
@@ -244,7 +257,7 @@ static int kvm_handle_ptrauth(struct kvm_vcpu *vcpu)
 		return 1;
 	}
 
-	if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu)) {
+	if (is_nested_ctxt(vcpu)) {
 		kvm_inject_nested_sync(vcpu, kvm_vcpu_get_esr(vcpu));
 		return 1;
 	}
@@ -291,6 +304,75 @@ static int handle_svc(struct kvm_vcpu *vcpu)
 	return 1;
 }
 
+static int kvm_handle_gcs(struct kvm_vcpu *vcpu)
+{
+	/* We don't expect GCS, so treat it with contempt */
+	if (kvm_has_feat(vcpu->kvm, ID_AA64PFR1_EL1, GCS, IMP))
+		WARN_ON_ONCE(1);
+
+	kvm_inject_undefined(vcpu);
+	return 1;
+}
+
+static int handle_other(struct kvm_vcpu *vcpu)
+{
+	bool allowed, fwd = is_nested_ctxt(vcpu);
+	u64 hcrx = __vcpu_sys_reg(vcpu, HCRX_EL2);
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+	u64 iss = ESR_ELx_ISS(esr);
+	struct kvm *kvm = vcpu->kvm;
+
+	/*
+	 * We only trap for two reasons:
+	 *
+	 * - the feature is disabled, and the only outcome is to
+	 *   generate an UNDEF.
+	 *
+	 * - the feature is enabled, but a NV guest wants to trap the
+	 *   feature used by its L2 guest. We forward the exception in
+	 *   this case.
+	 *
+	 * What we don't expect is to end-up here if the guest is
+	 * expected be be able to directly use the feature, hence the
+	 * WARN_ON below.
+	 */
+	switch (iss) {
+	case ESR_ELx_ISS_OTHER_ST64BV:
+		allowed = kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64_V);
+		fwd &= !(hcrx & HCRX_EL2_EnASR);
+		break;
+	case ESR_ELx_ISS_OTHER_ST64BV0:
+		allowed = kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64_ACCDATA);
+		fwd &= !(hcrx & HCRX_EL2_EnAS0);
+		break;
+	case ESR_ELx_ISS_OTHER_LDST64B:
+		allowed = kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64);
+		fwd &= !(hcrx & HCRX_EL2_EnALS);
+		break;
+	case ESR_ELx_ISS_OTHER_TSBCSYNC:
+		allowed = kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceBuffer, TRBE_V1P1);
+		fwd &= (__vcpu_sys_reg(vcpu, HFGITR2_EL2) & HFGITR2_EL2_TSBCSYNC);
+		break;
+	case ESR_ELx_ISS_OTHER_PSBCSYNC:
+		allowed = kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMSVer, V1P5);
+		fwd &= (__vcpu_sys_reg(vcpu, HFGITR_EL2) & HFGITR_EL2_PSBCSYNC);
+		break;
+	default:
+		/* Clearly, we're missing something. */
+		WARN_ON_ONCE(1);
+		allowed = false;
+	}
+
+	WARN_ON_ONCE(allowed && !fwd);
+
+	if (allowed && fwd)
+		kvm_inject_nested_sync(vcpu, esr);
+	else
+		kvm_inject_undefined(vcpu);
+
+	return 1;
+}
+
 static exit_handle_fn arm_exit_handlers[] = {
 	[0 ... ESR_ELx_EC_MAX]	= kvm_handle_unknown_ec,
 	[ESR_ELx_EC_WFx]	= kvm_handle_wfx,
@@ -300,6 +382,7 @@ static exit_handle_fn arm_exit_handlers[] = {
 	[ESR_ELx_EC_CP14_LS]	= kvm_handle_cp14_load_store,
 	[ESR_ELx_EC_CP10_ID]	= kvm_handle_cp10_id,
 	[ESR_ELx_EC_CP14_64]	= kvm_handle_cp14_64,
+	[ESR_ELx_EC_OTHER]	= handle_other,
 	[ESR_ELx_EC_HVC32]	= handle_hvc,
 	[ESR_ELx_EC_SMC32]	= handle_smc,
 	[ESR_ELx_EC_HVC64]	= handle_hvc,
@@ -310,6 +393,7 @@ static exit_handle_fn arm_exit_handlers[] = {
 	[ESR_ELx_EC_ERET]	= kvm_handle_eret,
 	[ESR_ELx_EC_IABT_LOW]	= kvm_handle_guest_abort,
 	[ESR_ELx_EC_DABT_LOW]	= kvm_handle_guest_abort,
+	[ESR_ELx_EC_DABT_CUR]	= kvm_handle_vncr_abort,
 	[ESR_ELx_EC_SOFTSTP_LOW]= kvm_handle_guest_debug,
 	[ESR_ELx_EC_WATCHPT_LOW]= kvm_handle_guest_debug,
 	[ESR_ELx_EC_BREAKPT_LOW]= kvm_handle_guest_debug,
@@ -317,6 +401,7 @@ static exit_handle_fn arm_exit_handlers[] = {
 	[ESR_ELx_EC_BRK64]	= kvm_handle_guest_debug,
 	[ESR_ELx_EC_FP_ASIMD]	= kvm_handle_fpasimd,
 	[ESR_ELx_EC_PAC]	= kvm_handle_ptrauth,
+	[ESR_ELx_EC_GCS]	= kvm_handle_gcs,
 };
 
 static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu)
@@ -410,7 +495,7 @@ void handle_exit_early(struct kvm_vcpu *vcpu, int exception_index)
 
 			kvm_handle_guest_serror(vcpu, disr_to_esr(disr));
 		} else {
-			kvm_inject_vabt(vcpu);
+			kvm_inject_serror(vcpu);
 		}
 
 		return;
@@ -465,8 +550,13 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr,
 			kvm_err("nVHE hyp BUG at: %s:%u!\n", file, line);
 		else
 			print_nvhe_hyp_panic("BUG", panic_addr);
-	} else if (IS_ENABLED(CONFIG_CFI_CLANG) && esr_is_cfi_brk(esr)) {
+	} else if (IS_ENABLED(CONFIG_CFI) && esr_is_cfi_brk(esr)) {
 		kvm_nvhe_report_cfi_failure(panic_addr);
+	} else if (IS_ENABLED(CONFIG_UBSAN_KVM_EL2) &&
+		   ESR_ELx_EC(esr) == ESR_ELx_EC_BRK64 &&
+		   esr_is_ubsan_brk(esr)) {
+		print_nvhe_hyp_panic(report_ubsan_failure(esr & UBSAN_BRK_MASK),
+				     panic_addr);
 	} else {
 		print_nvhe_hyp_panic("panic", panic_addr);
 	}
@@ -474,6 +564,9 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr,
 	/* Dump the nVHE hypervisor backtrace */
 	kvm_nvhe_dump_backtrace(hyp_offset);
 
+	/* Dump the faulting instruction */
+	dump_kernel_instr(panic_addr + kaslr_offset());
+
 	/*
 	 * Hyp has panicked and we're going to handle that by panicking the
 	 * kernel. The kernel offset will be revealed in the panic so we're
diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
index 4433a234aa9b..9f4e8d68ab50 100644
--- a/arch/arm64/kvm/hyp/entry.S
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -44,6 +44,11 @@ alternative_if ARM64_HAS_RAS_EXTN
 alternative_else_nop_endif
 	mrs	x1, isr_el1
 	cbz	x1,  1f
+
+	// Ensure that __guest_enter() always provides a context
+	// synchronization event so that callers don't need ISBs for anything
+	// that would usually be synchonized by the ERET.
+	isb
 	mov	x0, #ARM_EXCEPTION_IRQ
 	ret
 
diff --git a/arch/arm64/kvm/hyp/exception.c b/arch/arm64/kvm/hyp/exception.c
index 424a5107cddb..bef40ddb16db 100644
--- a/arch/arm64/kvm/hyp/exception.c
+++ b/arch/arm64/kvm/hyp/exception.c
@@ -22,42 +22,36 @@
 
 static inline u64 __vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg)
 {
-	u64 val;
-
-	if (unlikely(vcpu_has_nv(vcpu)))
+	if (has_vhe())
 		return vcpu_read_sys_reg(vcpu, reg);
-	else if (__vcpu_read_sys_reg_from_cpu(reg, &val))
-		return val;
 
 	return __vcpu_sys_reg(vcpu, reg);
 }
 
 static inline void __vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
 {
-	if (unlikely(vcpu_has_nv(vcpu)))
+	if (has_vhe())
 		vcpu_write_sys_reg(vcpu, val, reg);
-	else if (!__vcpu_write_sys_reg_to_cpu(val, reg))
-		__vcpu_sys_reg(vcpu, reg) = val;
+	else
+		__vcpu_assign_sys_reg(vcpu, reg, val);
 }
 
 static void __vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long target_mode,
 			      u64 val)
 {
-	if (unlikely(vcpu_has_nv(vcpu))) {
+	if (has_vhe()) {
 		if (target_mode == PSR_MODE_EL1h)
 			vcpu_write_sys_reg(vcpu, val, SPSR_EL1);
 		else
 			vcpu_write_sys_reg(vcpu, val, SPSR_EL2);
-	} else if (has_vhe()) {
-		write_sysreg_el1(val, SYS_SPSR);
 	} else {
-		__vcpu_sys_reg(vcpu, SPSR_EL1) = val;
+		__vcpu_assign_sys_reg(vcpu, SPSR_EL1, val);
 	}
 }
 
 static void __vcpu_write_spsr_abt(struct kvm_vcpu *vcpu, u64 val)
 {
-	if (has_vhe())
+	if (has_vhe() && vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
 		write_sysreg(val, spsr_abt);
 	else
 		vcpu->arch.ctxt.spsr_abt = val;
@@ -65,7 +59,7 @@ static void __vcpu_write_spsr_abt(struct kvm_vcpu *vcpu, u64 val)
 
 static void __vcpu_write_spsr_und(struct kvm_vcpu *vcpu, u64 val)
 {
-	if (has_vhe())
+	if (has_vhe() && vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
 		write_sysreg(val, spsr_und);
 	else
 		vcpu->arch.ctxt.spsr_und = val;
@@ -339,6 +333,10 @@ static void kvm_inject_exception(struct kvm_vcpu *vcpu)
 			enter_exception64(vcpu, PSR_MODE_EL1h, except_type_sync);
 			break;
 
+		case unpack_vcpu_flag(EXCEPT_AA64_EL1_SERR):
+			enter_exception64(vcpu, PSR_MODE_EL1h, except_type_serror);
+			break;
+
 		case unpack_vcpu_flag(EXCEPT_AA64_EL2_SYNC):
 			enter_exception64(vcpu, PSR_MODE_EL2h, except_type_sync);
 			break;
@@ -347,9 +345,13 @@ static void kvm_inject_exception(struct kvm_vcpu *vcpu)
 			enter_exception64(vcpu, PSR_MODE_EL2h, except_type_irq);
 			break;
 
+		case unpack_vcpu_flag(EXCEPT_AA64_EL2_SERR):
+			enter_exception64(vcpu, PSR_MODE_EL2h, except_type_serror);
+			break;
+
 		default:
 			/*
-			 * Only EL1_SYNC and EL2_{SYNC,IRQ} makes
+			 * Only EL1_{SYNC,SERR} and EL2_{SYNC,IRQ,SERR} makes
 			 * sense so far. Everything else gets silently
 			 * ignored.
 			 */
diff --git a/arch/arm64/kvm/hyp/include/hyp/debug-sr.h b/arch/arm64/kvm/hyp/include/hyp/debug-sr.h
index d00093699aaf..502a5b73ee70 100644
--- a/arch/arm64/kvm/hyp/include/hyp/debug-sr.h
+++ b/arch/arm64/kvm/hyp/include/hyp/debug-sr.h
@@ -88,15 +88,26 @@
 	default:	write_debug(ptr[0], reg, 0);			\
 	}
 
+static struct kvm_guest_debug_arch *__vcpu_debug_regs(struct kvm_vcpu *vcpu)
+{
+	switch (vcpu->arch.debug_owner) {
+	case VCPU_DEBUG_FREE:
+		WARN_ON_ONCE(1);
+		fallthrough;
+	case VCPU_DEBUG_GUEST_OWNED:
+		return &vcpu->arch.vcpu_debug_state;
+	case VCPU_DEBUG_HOST_OWNED:
+		return &vcpu->arch.external_debug_state;
+	}
+
+	return NULL;
+}
+
 static void __debug_save_state(struct kvm_guest_debug_arch *dbg,
 			       struct kvm_cpu_context *ctxt)
 {
-	u64 aa64dfr0;
-	int brps, wrps;
-
-	aa64dfr0 = read_sysreg(id_aa64dfr0_el1);
-	brps = (aa64dfr0 >> 12) & 0xf;
-	wrps = (aa64dfr0 >> 20) & 0xf;
+	int brps = *host_data_ptr(debug_brps);
+	int wrps = *host_data_ptr(debug_wrps);
 
 	save_debug(dbg->dbg_bcr, dbgbcr, brps);
 	save_debug(dbg->dbg_bvr, dbgbvr, brps);
@@ -109,13 +120,8 @@ static void __debug_save_state(struct kvm_guest_debug_arch *dbg,
 static void __debug_restore_state(struct kvm_guest_debug_arch *dbg,
 				  struct kvm_cpu_context *ctxt)
 {
-	u64 aa64dfr0;
-	int brps, wrps;
-
-	aa64dfr0 = read_sysreg(id_aa64dfr0_el1);
-
-	brps = (aa64dfr0 >> 12) & 0xf;
-	wrps = (aa64dfr0 >> 20) & 0xf;
+	int brps = *host_data_ptr(debug_brps);
+	int wrps = *host_data_ptr(debug_wrps);
 
 	restore_debug(dbg->dbg_bcr, dbgbcr, brps);
 	restore_debug(dbg->dbg_bvr, dbgbvr, brps);
@@ -132,13 +138,13 @@ static inline void __debug_switch_to_guest_common(struct kvm_vcpu *vcpu)
 	struct kvm_guest_debug_arch *host_dbg;
 	struct kvm_guest_debug_arch *guest_dbg;
 
-	if (!vcpu_get_flag(vcpu, DEBUG_DIRTY))
+	if (!kvm_debug_regs_in_use(vcpu))
 		return;
 
 	host_ctxt = host_data_ptr(host_ctxt);
 	guest_ctxt = &vcpu->arch.ctxt;
 	host_dbg = host_data_ptr(host_debug_state.regs);
-	guest_dbg = kern_hyp_va(vcpu->arch.debug_ptr);
+	guest_dbg = __vcpu_debug_regs(vcpu);
 
 	__debug_save_state(host_dbg, host_ctxt);
 	__debug_restore_state(guest_dbg, guest_ctxt);
@@ -151,18 +157,16 @@ static inline void __debug_switch_to_host_common(struct kvm_vcpu *vcpu)
 	struct kvm_guest_debug_arch *host_dbg;
 	struct kvm_guest_debug_arch *guest_dbg;
 
-	if (!vcpu_get_flag(vcpu, DEBUG_DIRTY))
+	if (!kvm_debug_regs_in_use(vcpu))
 		return;
 
 	host_ctxt = host_data_ptr(host_ctxt);
 	guest_ctxt = &vcpu->arch.ctxt;
 	host_dbg = host_data_ptr(host_debug_state.regs);
-	guest_dbg = kern_hyp_va(vcpu->arch.debug_ptr);
+	guest_dbg = __vcpu_debug_regs(vcpu);
 
 	__debug_save_state(guest_dbg, guest_ctxt);
 	__debug_restore_state(host_dbg, host_ctxt);
-
-	vcpu_clear_flag(vcpu, DEBUG_DIRTY);
 }
 
 #endif /* __ARM64_KVM_HYP_DEBUG_SR_H__ */
diff --git a/arch/arm64/kvm/hyp/include/hyp/fault.h b/arch/arm64/kvm/hyp/include/hyp/fault.h
index 17df94570f03..fc573fc767b0 100644
--- a/arch/arm64/kvm/hyp/include/hyp/fault.h
+++ b/arch/arm64/kvm/hyp/include/hyp/fault.h
@@ -12,6 +12,16 @@
 #include <asm/kvm_hyp.h>
 #include <asm/kvm_mmu.h>
 
+static inline bool __fault_safe_to_translate(u64 esr)
+{
+	u64 fsc = esr & ESR_ELx_FSC;
+
+	if (esr_fsc_is_sea_ttw(esr) || esr_fsc_is_secc_ttw(esr))
+		return false;
+
+	return !(fsc == ESR_ELx_FSC_EXTABT && (esr & ESR_ELx_FnV));
+}
+
 static inline bool __translate_far_to_hpfar(u64 far, u64 *hpfar)
 {
 	int ret;
@@ -44,34 +54,50 @@ static inline bool __translate_far_to_hpfar(u64 far, u64 *hpfar)
 	return true;
 }
 
-static inline bool __get_fault_info(u64 esr, struct kvm_vcpu_fault_info *fault)
+/*
+ * Checks for the conditions when HPFAR_EL2 is written, per ARM ARM R_FKLWR.
+ */
+static inline bool __hpfar_valid(u64 esr)
 {
-	u64 hpfar, far;
-
-	far = read_sysreg_el2(SYS_FAR);
-
 	/*
-	 * The HPFAR can be invalid if the stage 2 fault did not
-	 * happen during a stage 1 page table walk (the ESR_EL2.S1PTW
-	 * bit is clear) and one of the two following cases are true:
-	 *   1. The fault was due to a permission fault
-	 *   2. The processor carries errata 834220
+	 * CPUs affected by ARM erratum #834220 may incorrectly report a
+	 * stage-2 translation fault when a stage-1 permission fault occurs.
 	 *
-	 * Therefore, for all non S1PTW faults where we either have a
-	 * permission fault or the errata workaround is enabled, we
-	 * resolve the IPA using the AT instruction.
+	 * Re-walk the page tables to determine if a stage-1 fault actually
+	 * occurred.
 	 */
-	if (!(esr & ESR_ELx_S1PTW) &&
-	    (cpus_have_final_cap(ARM64_WORKAROUND_834220) ||
-	     esr_fsc_is_permission_fault(esr))) {
-		if (!__translate_far_to_hpfar(far, &hpfar))
-			return false;
-	} else {
+	if (cpus_have_final_cap(ARM64_WORKAROUND_834220) &&
+	    esr_fsc_is_translation_fault(esr))
+		return false;
+
+	if (esr_fsc_is_translation_fault(esr) || esr_fsc_is_access_flag_fault(esr))
+		return true;
+
+	if ((esr & ESR_ELx_S1PTW) && esr_fsc_is_permission_fault(esr))
+		return true;
+
+	return esr_fsc_is_addr_sz_fault(esr);
+}
+
+static inline bool __get_fault_info(u64 esr, struct kvm_vcpu_fault_info *fault)
+{
+	u64 hpfar;
+
+	fault->far_el2		= read_sysreg_el2(SYS_FAR);
+	fault->hpfar_el2	= 0;
+
+	if (__hpfar_valid(esr))
 		hpfar = read_sysreg(hpfar_el2);
-	}
+	else if (unlikely(!__fault_safe_to_translate(esr)))
+		return true;
+	else if (!__translate_far_to_hpfar(fault->far_el2, &hpfar))
+		return false;
 
-	fault->far_el2 = far;
-	fault->hpfar_el2 = hpfar;
+	/*
+	 * Hijack HPFAR_EL2.NS (RES0 in Non-secure) to indicate a valid
+	 * HPFAR value.
+	 */
+	fault->hpfar_el2 = hpfar | HPFAR_EL2_NS;
 	return true;
 }
 
diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h
index 34f53707892d..c5d5e5b86eaf 100644
--- a/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -45,7 +45,7 @@ static inline void __fpsimd_save_fpexc32(struct kvm_vcpu *vcpu)
 	if (!vcpu_el1_is_32bit(vcpu))
 		return;
 
-	__vcpu_sys_reg(vcpu, FPEXC32_EL2) = read_sysreg(fpexc32_el2);
+	__vcpu_assign_sys_reg(vcpu, FPEXC32_EL2, read_sysreg(fpexc32_el2));
 }
 
 static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
@@ -65,79 +65,135 @@ static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
 	}
 }
 
-#define compute_clr_set(vcpu, reg, clr, set)				\
-	do {								\
-		u64 hfg;						\
-		hfg = __vcpu_sys_reg(vcpu, reg) & ~__ ## reg ## _RES0;	\
-		set |= hfg & __ ## reg ## _MASK; 			\
-		clr |= ~hfg & __ ## reg ## _nMASK; 			\
-	} while(0)
+static inline void __activate_cptr_traps_nvhe(struct kvm_vcpu *vcpu)
+{
+	u64 val = CPTR_NVHE_EL2_RES1 | CPTR_EL2_TAM | CPTR_EL2_TTA;
 
-#define reg_to_fgt_group_id(reg)					\
-	({								\
-		enum fgt_group_id id;					\
-		switch(reg) {						\
-		case HFGRTR_EL2:					\
-		case HFGWTR_EL2:					\
-			id = HFGxTR_GROUP;				\
-			break;						\
-		case HFGITR_EL2:					\
-			id = HFGITR_GROUP;				\
-			break;						\
-		case HDFGRTR_EL2:					\
-		case HDFGWTR_EL2:					\
-			id = HDFGRTR_GROUP;				\
-			break;						\
-		case HAFGRTR_EL2:					\
-			id = HAFGRTR_GROUP;				\
-			break;						\
-		default:						\
-			BUILD_BUG_ON(1);				\
-		}							\
-									\
-		id;							\
-	})
-
-#define compute_undef_clr_set(vcpu, kvm, reg, clr, set)			\
-	do {								\
-		u64 hfg = kvm->arch.fgu[reg_to_fgt_group_id(reg)];	\
-		set |= hfg & __ ## reg ## _MASK;			\
-		clr |= hfg & __ ## reg ## _nMASK; 			\
-	} while(0)
+	/*
+	 * Always trap SME since it's not supported in KVM.
+	 * TSM is RES1 if SME isn't implemented.
+	 */
+	val |= CPTR_EL2_TSM;
 
-#define update_fgt_traps_cs(hctxt, vcpu, kvm, reg, clr, set)		\
-	do {								\
-		u64 c = 0, s = 0;					\
-									\
-		ctxt_sys_reg(hctxt, reg) = read_sysreg_s(SYS_ ## reg);	\
-		if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu))		\
-			compute_clr_set(vcpu, reg, c, s);		\
-									\
-		compute_undef_clr_set(vcpu, kvm, reg, c, s);		\
-									\
-		s |= set;						\
-		c |= clr;						\
-		if (c || s) {						\
-			u64 val = __ ## reg ## _nMASK;			\
-			val |= s;					\
-			val &= ~c;					\
-			write_sysreg_s(val, SYS_ ## reg);		\
-		}							\
-	} while(0)
+	if (!vcpu_has_sve(vcpu) || !guest_owns_fp_regs())
+		val |= CPTR_EL2_TZ;
 
-#define update_fgt_traps(hctxt, vcpu, kvm, reg)		\
-	update_fgt_traps_cs(hctxt, vcpu, kvm, reg, 0, 0)
+	if (!guest_owns_fp_regs())
+		val |= CPTR_EL2_TFP;
 
-/*
- * Validate the fine grain trap masks.
- * Check that the masks do not overlap and that all bits are accounted for.
- */
-#define CHECK_FGT_MASKS(reg)							\
-	do {									\
-		BUILD_BUG_ON((__ ## reg ## _MASK) & (__ ## reg ## _nMASK));	\
-		BUILD_BUG_ON(~((__ ## reg ## _RES0) ^ (__ ## reg ## _MASK) ^	\
-			       (__ ## reg ## _nMASK)));				\
-	} while(0)
+	write_sysreg(val, cptr_el2);
+}
+
+static inline void __activate_cptr_traps_vhe(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * With VHE (HCR.E2H == 1), accesses to CPACR_EL1 are routed to
+	 * CPTR_EL2. In general, CPACR_EL1 has the same layout as CPTR_EL2,
+	 * except for some missing controls, such as TAM.
+	 * In this case, CPTR_EL2.TAM has the same position with or without
+	 * VHE (HCR.E2H == 1) which allows us to use here the CPTR_EL2.TAM
+	 * shift value for trapping the AMU accesses.
+	 */
+	u64 val = CPTR_EL2_TAM | CPACR_EL1_TTA;
+	u64 cptr;
+
+	if (guest_owns_fp_regs()) {
+		val |= CPACR_EL1_FPEN;
+		if (vcpu_has_sve(vcpu))
+			val |= CPACR_EL1_ZEN;
+	}
+
+	if (!vcpu_has_nv(vcpu))
+		goto write;
+
+	/*
+	 * The architecture is a bit crap (what a surprise): an EL2 guest
+	 * writing to CPTR_EL2 via CPACR_EL1 can't set any of TCPAC or TTA,
+	 * as they are RES0 in the guest's view. To work around it, trap the
+	 * sucker using the very same bit it can't set...
+	 */
+	if (vcpu_el2_e2h_is_set(vcpu) && is_hyp_ctxt(vcpu))
+		val |= CPTR_EL2_TCPAC;
+
+	/*
+	 * Layer the guest hypervisor's trap configuration on top of our own if
+	 * we're in a nested context.
+	 */
+	if (is_hyp_ctxt(vcpu))
+		goto write;
+
+	cptr = vcpu_sanitised_cptr_el2(vcpu);
+
+	/*
+	 * Pay attention, there's some interesting detail here.
+	 *
+	 * The CPTR_EL2.xEN fields are 2 bits wide, although there are only two
+	 * meaningful trap states when HCR_EL2.TGE = 0 (running a nested guest):
+	 *
+	 *  - CPTR_EL2.xEN = x0, traps are enabled
+	 *  - CPTR_EL2.xEN = x1, traps are disabled
+	 *
+	 * In other words, bit[0] determines if guest accesses trap or not. In
+	 * the interest of simplicity, clear the entire field if the guest
+	 * hypervisor has traps enabled to dispel any illusion of something more
+	 * complicated taking place.
+	 */
+	if (!(SYS_FIELD_GET(CPACR_EL1, FPEN, cptr) & BIT(0)))
+		val &= ~CPACR_EL1_FPEN;
+	if (!(SYS_FIELD_GET(CPACR_EL1, ZEN, cptr) & BIT(0)))
+		val &= ~CPACR_EL1_ZEN;
+
+	if (kvm_has_feat(vcpu->kvm, ID_AA64MMFR3_EL1, S2POE, IMP))
+		val |= cptr & CPACR_EL1_E0POE;
+
+	val |= cptr & CPTR_EL2_TCPAC;
+
+write:
+	write_sysreg(val, cpacr_el1);
+}
+
+static inline void __activate_cptr_traps(struct kvm_vcpu *vcpu)
+{
+	if (!guest_owns_fp_regs())
+		__activate_traps_fpsimd32(vcpu);
+
+	if (has_vhe() || has_hvhe())
+		__activate_cptr_traps_vhe(vcpu);
+	else
+		__activate_cptr_traps_nvhe(vcpu);
+}
+
+static inline void __deactivate_cptr_traps_nvhe(struct kvm_vcpu *vcpu)
+{
+	u64 val = CPTR_NVHE_EL2_RES1;
+
+	if (!cpus_have_final_cap(ARM64_SVE))
+		val |= CPTR_EL2_TZ;
+	if (!cpus_have_final_cap(ARM64_SME))
+		val |= CPTR_EL2_TSM;
+
+	write_sysreg(val, cptr_el2);
+}
+
+static inline void __deactivate_cptr_traps_vhe(struct kvm_vcpu *vcpu)
+{
+	u64 val = CPACR_EL1_FPEN;
+
+	if (cpus_have_final_cap(ARM64_SVE))
+		val |= CPACR_EL1_ZEN;
+	if (cpus_have_final_cap(ARM64_SME))
+		val |= CPACR_EL1_SMEN;
+
+	write_sysreg(val, cpacr_el1);
+}
+
+static inline void __deactivate_cptr_traps(struct kvm_vcpu *vcpu)
+{
+	if (has_vhe() || has_hvhe())
+		__deactivate_cptr_traps_vhe(vcpu);
+	else
+		__deactivate_cptr_traps_nvhe(vcpu);
+}
 
 static inline bool cpu_has_amu(void)
 {
@@ -147,61 +203,68 @@ static inline bool cpu_has_amu(void)
                ID_AA64PFR0_EL1_AMU_SHIFT);
 }
 
+#define __activate_fgt(hctxt, vcpu, reg)				\
+	do {								\
+		ctxt_sys_reg(hctxt, reg) = read_sysreg_s(SYS_ ## reg);	\
+		write_sysreg_s(*vcpu_fgt(vcpu, reg), SYS_ ## reg);	\
+	} while (0)
+
 static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *hctxt = host_data_ptr(host_ctxt);
-	struct kvm *kvm = kern_hyp_va(vcpu->kvm);
-
-	CHECK_FGT_MASKS(HFGRTR_EL2);
-	CHECK_FGT_MASKS(HFGWTR_EL2);
-	CHECK_FGT_MASKS(HFGITR_EL2);
-	CHECK_FGT_MASKS(HDFGRTR_EL2);
-	CHECK_FGT_MASKS(HDFGWTR_EL2);
-	CHECK_FGT_MASKS(HAFGRTR_EL2);
-	CHECK_FGT_MASKS(HCRX_EL2);
 
 	if (!cpus_have_final_cap(ARM64_HAS_FGT))
 		return;
 
-	update_fgt_traps(hctxt, vcpu, kvm, HFGRTR_EL2);
-	update_fgt_traps_cs(hctxt, vcpu, kvm, HFGWTR_EL2, 0,
-			    cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_38) ?
-			    HFGxTR_EL2_TCR_EL1_MASK : 0);
-	update_fgt_traps(hctxt, vcpu, kvm, HFGITR_EL2);
-	update_fgt_traps(hctxt, vcpu, kvm, HDFGRTR_EL2);
-	update_fgt_traps(hctxt, vcpu, kvm, HDFGWTR_EL2);
+	__activate_fgt(hctxt, vcpu, HFGRTR_EL2);
+	__activate_fgt(hctxt, vcpu, HFGWTR_EL2);
+	__activate_fgt(hctxt, vcpu, HFGITR_EL2);
+	__activate_fgt(hctxt, vcpu, HDFGRTR_EL2);
+	__activate_fgt(hctxt, vcpu, HDFGWTR_EL2);
 
 	if (cpu_has_amu())
-		update_fgt_traps(hctxt, vcpu, kvm, HAFGRTR_EL2);
+		__activate_fgt(hctxt, vcpu, HAFGRTR_EL2);
+
+	if (!cpus_have_final_cap(ARM64_HAS_FGT2))
+	    return;
+
+	__activate_fgt(hctxt, vcpu, HFGRTR2_EL2);
+	__activate_fgt(hctxt, vcpu, HFGWTR2_EL2);
+	__activate_fgt(hctxt, vcpu, HFGITR2_EL2);
+	__activate_fgt(hctxt, vcpu, HDFGRTR2_EL2);
+	__activate_fgt(hctxt, vcpu, HDFGWTR2_EL2);
 }
 
-#define __deactivate_fgt(htcxt, vcpu, kvm, reg)				\
+#define __deactivate_fgt(htcxt, vcpu, reg)				\
 	do {								\
-		if ((vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu)) ||	\
-		    kvm->arch.fgu[reg_to_fgt_group_id(reg)])		\
-			write_sysreg_s(ctxt_sys_reg(hctxt, reg),	\
-				       SYS_ ## reg);			\
+		write_sysreg_s(ctxt_sys_reg(hctxt, reg),		\
+			       SYS_ ## reg);				\
 	} while(0)
 
 static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *hctxt = host_data_ptr(host_ctxt);
-	struct kvm *kvm = kern_hyp_va(vcpu->kvm);
 
 	if (!cpus_have_final_cap(ARM64_HAS_FGT))
 		return;
 
-	__deactivate_fgt(hctxt, vcpu, kvm, HFGRTR_EL2);
-	if (cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_38))
-		write_sysreg_s(ctxt_sys_reg(hctxt, HFGWTR_EL2), SYS_HFGWTR_EL2);
-	else
-		__deactivate_fgt(hctxt, vcpu, kvm, HFGWTR_EL2);
-	__deactivate_fgt(hctxt, vcpu, kvm, HFGITR_EL2);
-	__deactivate_fgt(hctxt, vcpu, kvm, HDFGRTR_EL2);
-	__deactivate_fgt(hctxt, vcpu, kvm, HDFGWTR_EL2);
+	__deactivate_fgt(hctxt, vcpu, HFGRTR_EL2);
+	__deactivate_fgt(hctxt, vcpu, HFGWTR_EL2);
+	__deactivate_fgt(hctxt, vcpu, HFGITR_EL2);
+	__deactivate_fgt(hctxt, vcpu, HDFGRTR_EL2);
+	__deactivate_fgt(hctxt, vcpu, HDFGWTR_EL2);
 
 	if (cpu_has_amu())
-		__deactivate_fgt(hctxt, vcpu, kvm, HAFGRTR_EL2);
+		__deactivate_fgt(hctxt, vcpu, HAFGRTR_EL2);
+
+	if (!cpus_have_final_cap(ARM64_HAS_FGT2))
+	    return;
+
+	__deactivate_fgt(hctxt, vcpu, HFGRTR2_EL2);
+	__deactivate_fgt(hctxt, vcpu, HFGWTR2_EL2);
+	__deactivate_fgt(hctxt, vcpu, HFGITR2_EL2);
+	__deactivate_fgt(hctxt, vcpu, HDFGRTR2_EL2);
+	__deactivate_fgt(hctxt, vcpu, HDFGWTR2_EL2);
 }
 
 static inline void  __activate_traps_mpam(struct kvm_vcpu *vcpu)
@@ -235,6 +298,8 @@ static inline void __deactivate_traps_mpam(void)
 
 static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
 {
+	struct kvm_cpu_context *hctxt = host_data_ptr(host_ctxt);
+
 	/* Trap on AArch32 cp15 c15 (impdef sysregs) accesses (EL1 or EL0) */
 	write_sysreg(1 << 15, hstr_el2);
 
@@ -244,31 +309,23 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
 	 * counter, which could make a PMXEVCNTR_EL0 access UNDEF at
 	 * EL1 instead of being trapped to EL2.
 	 */
-	if (kvm_arm_support_pmu_v3()) {
-		struct kvm_cpu_context *hctxt;
-
+	if (system_supports_pmuv3()) {
 		write_sysreg(0, pmselr_el0);
 
-		hctxt = host_data_ptr(host_ctxt);
 		ctxt_sys_reg(hctxt, PMUSERENR_EL0) = read_sysreg(pmuserenr_el0);
 		write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0);
 		vcpu_set_flag(vcpu, PMUSERENR_ON_CPU);
 	}
 
-	*host_data_ptr(host_debug_state.mdcr_el2) = read_sysreg(mdcr_el2);
-	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
-
 	if (cpus_have_final_cap(ARM64_HAS_HCX)) {
 		u64 hcrx = vcpu->arch.hcrx_el2;
-		if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu)) {
-			u64 clr = 0, set = 0;
-
-			compute_clr_set(vcpu, HCRX_EL2, clr, set);
-
-			hcrx |= set;
-			hcrx &= ~clr;
+		if (is_nested_ctxt(vcpu)) {
+			u64 val = __vcpu_sys_reg(vcpu, HCRX_EL2);
+			hcrx |= val & __HCRX_EL2_MASK;
+			hcrx &= ~(~val & __HCRX_EL2_nMASK);
 		}
 
+		ctxt_sys_reg(hctxt, HCRX_EL2) = read_sysreg_s(SYS_HCRX_EL2);
 		write_sysreg_s(hcrx, SYS_HCRX_EL2);
 	}
 
@@ -278,19 +335,16 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
 
 static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
 {
-	write_sysreg(*host_data_ptr(host_debug_state.mdcr_el2), mdcr_el2);
+	struct kvm_cpu_context *hctxt = host_data_ptr(host_ctxt);
 
 	write_sysreg(0, hstr_el2);
-	if (kvm_arm_support_pmu_v3()) {
-		struct kvm_cpu_context *hctxt;
-
-		hctxt = host_data_ptr(host_ctxt);
+	if (system_supports_pmuv3()) {
 		write_sysreg(ctxt_sys_reg(hctxt, PMUSERENR_EL0), pmuserenr_el0);
 		vcpu_clear_flag(vcpu, PMUSERENR_ON_CPU);
 	}
 
 	if (cpus_have_final_cap(ARM64_HAS_HCX))
-		write_sysreg_s(HCRX_HOST_FLAGS, SYS_HCRX_EL2);
+		write_sysreg_s(ctxt_sys_reg(hctxt, HCRX_EL2), SYS_HCRX_EL2);
 
 	__deactivate_traps_hfgxtr(vcpu);
 	__deactivate_traps_mpam();
@@ -301,23 +355,58 @@ static inline void ___activate_traps(struct kvm_vcpu *vcpu, u64 hcr)
 	if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM))
 		hcr |= HCR_TVM;
 
-	write_sysreg(hcr, hcr_el2);
+	write_sysreg_hcr(hcr);
+
+	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN) && (hcr & HCR_VSE)) {
+		u64 vsesr;
 
-	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN) && (hcr & HCR_VSE))
-		write_sysreg_s(vcpu->arch.vsesr_el2, SYS_VSESR_EL2);
+		/*
+		 * When HCR_EL2.AMO is set, physical SErrors are taken to EL2
+		 * and vSError injection is enabled for EL1. Conveniently, for
+		 * NV this means that it is never the case where a 'physical'
+		 * SError (injected by KVM or userspace) and vSError are
+		 * deliverable to the same context.
+		 *
+		 * As such, we can trivially select between the host or guest's
+		 * VSESR_EL2. Except for the case that FEAT_RAS hasn't been
+		 * exposed to the guest, where ESR propagation in hardware
+		 * occurs unconditionally.
+		 *
+		 * Paper over the architectural wart and use an IMPLEMENTATION
+		 * DEFINED ESR value in case FEAT_RAS is hidden from the guest.
+		 */
+		if (!vserror_state_is_nested(vcpu))
+			vsesr = vcpu->arch.vsesr_el2;
+		else if (kvm_has_ras(kern_hyp_va(vcpu->kvm)))
+			vsesr = __vcpu_sys_reg(vcpu, VSESR_EL2);
+		else
+			vsesr = ESR_ELx_ISV;
+
+		write_sysreg_s(vsesr, SYS_VSESR_EL2);
+	}
 }
 
 static inline void ___deactivate_traps(struct kvm_vcpu *vcpu)
 {
+	u64 *hcr;
+
+	if (vserror_state_is_nested(vcpu))
+		hcr = __ctxt_sys_reg(&vcpu->arch.ctxt, HCR_EL2);
+	else
+		hcr = &vcpu->arch.hcr_el2;
+
 	/*
 	 * If we pended a virtual abort, preserve it until it gets
 	 * cleared. See D1.14.3 (Virtual Interrupts) for details, but
 	 * the crucial bit is "On taking a vSError interrupt,
 	 * HCR_EL2.VSE is cleared to 0."
+	 *
+	 * Additionally, when in a nested context we need to propagate the
+	 * updated state to the guest hypervisor's HCR_EL2.
 	 */
-	if (vcpu->arch.hcr_el2 & HCR_VSE) {
-		vcpu->arch.hcr_el2 &= ~HCR_VSE;
-		vcpu->arch.hcr_el2 |= read_sysreg(hcr_el2) & HCR_VSE;
+	if (*hcr & HCR_VSE) {
+		*hcr &= ~HCR_VSE;
+		*hcr |= read_sysreg(hcr_el2) & HCR_VSE;
 	}
 }
 
@@ -326,7 +415,7 @@ static inline bool __populate_fault_info(struct kvm_vcpu *vcpu)
 	return __get_fault_info(vcpu->arch.fault.esr_el2, &vcpu->arch.fault);
 }
 
-static bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code)
+static inline bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
 	*vcpu_pc(vcpu) = read_sysreg_el2(SYS_ELR);
 	arm64_mops_reset_regs(vcpu_gp_regs(vcpu), vcpu->arch.fault.esr_el2);
@@ -358,7 +447,7 @@ static inline void __hyp_sve_restore_guest(struct kvm_vcpu *vcpu)
 	 * nested guest, as the guest hypervisor could select a smaller VL. Slap
 	 * that into hardware before wrapping up.
 	 */
-	if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu))
+	if (is_nested_ctxt(vcpu))
 		sve_cond_update_zcr_vq(__vcpu_sys_reg(vcpu, ZCR_EL2), SYS_ZCR_EL2);
 
 	write_sysreg_el1(__vcpu_sys_reg(vcpu, vcpu_sve_zcr_elx(vcpu)), SYS_ZCR);
@@ -375,7 +464,82 @@ static inline void __hyp_sve_save_host(void)
 			 true);
 }
 
-static void kvm_hyp_save_fpsimd_host(struct kvm_vcpu *vcpu);
+static inline void fpsimd_lazy_switch_to_guest(struct kvm_vcpu *vcpu)
+{
+	u64 zcr_el1, zcr_el2;
+
+	if (!guest_owns_fp_regs())
+		return;
+
+	if (vcpu_has_sve(vcpu)) {
+		/* A guest hypervisor may restrict the effective max VL. */
+		if (is_nested_ctxt(vcpu))
+			zcr_el2 = __vcpu_sys_reg(vcpu, ZCR_EL2);
+		else
+			zcr_el2 = vcpu_sve_max_vq(vcpu) - 1;
+
+		write_sysreg_el2(zcr_el2, SYS_ZCR);
+
+		zcr_el1 = __vcpu_sys_reg(vcpu, vcpu_sve_zcr_elx(vcpu));
+		write_sysreg_el1(zcr_el1, SYS_ZCR);
+	}
+}
+
+static inline void fpsimd_lazy_switch_to_host(struct kvm_vcpu *vcpu)
+{
+	u64 zcr_el1, zcr_el2;
+
+	if (!guest_owns_fp_regs())
+		return;
+
+	/*
+	 * When the guest owns the FP regs, we know that guest+hyp traps for
+	 * any FPSIMD/SVE/SME features exposed to the guest have been disabled
+	 * by either fpsimd_lazy_switch_to_guest() or kvm_hyp_handle_fpsimd()
+	 * prior to __guest_entry(). As __guest_entry() guarantees a context
+	 * synchronization event, we don't need an ISB here to avoid taking
+	 * traps for anything that was exposed to the guest.
+	 */
+	if (vcpu_has_sve(vcpu)) {
+		zcr_el1 = read_sysreg_el1(SYS_ZCR);
+		__vcpu_assign_sys_reg(vcpu, vcpu_sve_zcr_elx(vcpu), zcr_el1);
+
+		/*
+		 * The guest's state is always saved using the guest's max VL.
+		 * Ensure that the host has the guest's max VL active such that
+		 * the host can save the guest's state lazily, but don't
+		 * artificially restrict the host to the guest's max VL.
+		 */
+		if (has_vhe()) {
+			zcr_el2 = vcpu_sve_max_vq(vcpu) - 1;
+			write_sysreg_el2(zcr_el2, SYS_ZCR);
+		} else {
+			zcr_el2 = sve_vq_from_vl(kvm_host_sve_max_vl) - 1;
+			write_sysreg_el2(zcr_el2, SYS_ZCR);
+
+			zcr_el1 = vcpu_sve_max_vq(vcpu) - 1;
+			write_sysreg_el1(zcr_el1, SYS_ZCR);
+		}
+	}
+}
+
+static void kvm_hyp_save_fpsimd_host(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * Non-protected kvm relies on the host restoring its sve state.
+	 * Protected kvm restores the host's sve state as not to reveal that
+	 * fpsimd was used by a guest nor leak upper sve bits.
+	 */
+	if (system_supports_sve()) {
+		__hyp_sve_save_host();
+	} else {
+		__fpsimd_save_state(host_data_ptr(host_ctxt.fp_regs));
+	}
+
+	if (kvm_has_fpmr(kern_hyp_va(vcpu->kvm)))
+		*host_data_ptr(fpmr) = read_sysreg_s(SYS_FPMR);
+}
+
 
 /*
  * We trap the first access to the FP/SIMD to save the host context and
@@ -383,7 +547,7 @@ static void kvm_hyp_save_fpsimd_host(struct kvm_vcpu *vcpu);
  * If FP/SIMD is not implemented, handle the trap and inject an undefined
  * instruction exception to the guest. Similarly for trapped SVE accesses.
  */
-static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
+static inline bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
 	bool sve_guest;
 	u8 esr_ec;
@@ -418,14 +582,11 @@ static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
 	/* Valid trap.  Switch the context: */
 
 	/* First disable enough traps to allow us to update the registers */
-	if (sve_guest || (is_protected_kvm_enabled() && system_supports_sve()))
-		cpacr_clear_set(0, CPACR_ELx_FPEN | CPACR_ELx_ZEN);
-	else
-		cpacr_clear_set(0, CPACR_ELx_FPEN);
+	__deactivate_cptr_traps(vcpu);
 	isb();
 
 	/* Write out the host state if it's in the registers */
-	if (host_owns_fp_regs())
+	if (is_protected_kvm_enabled() && host_owns_fp_regs())
 		kvm_hyp_save_fpsimd_host(vcpu);
 
 	/* Restore the guest state */
@@ -443,6 +604,13 @@ static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
 
 	*host_data_ptr(fp_owner) = FP_STATE_GUEST_OWNED;
 
+	/*
+	 * Re-enable traps necessary for the current state of the guest, e.g.
+	 * those enabled by a guest hypervisor. The ERET to the guest will
+	 * provide the necessary context synchronization.
+	 */
+	__activate_cptr_traps(vcpu);
+
 	return true;
 }
 
@@ -501,7 +669,25 @@ static inline bool handle_tx2_tvm(struct kvm_vcpu *vcpu)
 	return true;
 }
 
-static bool kvm_hyp_handle_cntpct(struct kvm_vcpu *vcpu)
+/* Open-coded version of timer_get_offset() to allow for kern_hyp_va() */
+static inline u64 hyp_timer_get_offset(struct arch_timer_context *ctxt)
+{
+	u64 offset = 0;
+
+	if (ctxt->offset.vm_offset)
+		offset += *kern_hyp_va(ctxt->offset.vm_offset);
+	if (ctxt->offset.vcpu_offset)
+		offset += *kern_hyp_va(ctxt->offset.vcpu_offset);
+
+	return offset;
+}
+
+static inline u64 compute_counter_value(struct arch_timer_context *ctxt)
+{
+	return arch_timer_read_cntpct_el0() - hyp_timer_get_offset(ctxt);
+}
+
+static bool kvm_handle_cntxct(struct kvm_vcpu *vcpu)
 {
 	struct arch_timer_context *ctxt;
 	u32 sysreg;
@@ -511,18 +697,19 @@ static bool kvm_hyp_handle_cntpct(struct kvm_vcpu *vcpu)
 	 * We only get here for 64bit guests, 32bit guests will hit
 	 * the long and winding road all the way to the standard
 	 * handling. Yes, it sucks to be irrelevant.
+	 *
+	 * Also, we only deal with non-hypervisor context here (either
+	 * an EL1 guest, or a non-HYP context of an EL2 guest).
 	 */
+	if (is_hyp_ctxt(vcpu))
+		return false;
+
 	sysreg = esr_sys64_to_sysreg(kvm_vcpu_get_esr(vcpu));
 
 	switch (sysreg) {
 	case SYS_CNTPCT_EL0:
 	case SYS_CNTPCTSS_EL0:
 		if (vcpu_has_nv(vcpu)) {
-			if (is_hyp_ctxt(vcpu)) {
-				ctxt = vcpu_hptimer(vcpu);
-				break;
-			}
-
 			/* Check for guest hypervisor trapping */
 			val = __vcpu_sys_reg(vcpu, CNTHCTL_EL2);
 			if (!vcpu_el2_e2h_is_set(vcpu))
@@ -534,16 +721,23 @@ static bool kvm_hyp_handle_cntpct(struct kvm_vcpu *vcpu)
 
 		ctxt = vcpu_ptimer(vcpu);
 		break;
+	case SYS_CNTVCT_EL0:
+	case SYS_CNTVCTSS_EL0:
+		if (vcpu_has_nv(vcpu)) {
+			/* Check for guest hypervisor trapping */
+			val = __vcpu_sys_reg(vcpu, CNTHCTL_EL2);
+
+			if (val & CNTHCTL_EL1TVCT)
+				return false;
+		}
+
+		ctxt = vcpu_vtimer(vcpu);
+		break;
 	default:
 		return false;
 	}
 
-	val = arch_timer_read_cntpct_el0();
-
-	if (ctxt->offset.vm_offset)
-		val -= *kern_hyp_va(ctxt->offset.vm_offset);
-	if (ctxt->offset.vcpu_offset)
-		val -= *kern_hyp_va(ctxt->offset.vcpu_offset);
+	val = compute_counter_value(ctxt);
 
 	vcpu_set_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu), val);
 	__kvm_skip_instr(vcpu);
@@ -574,7 +768,7 @@ static bool handle_ampere1_tcr(struct kvm_vcpu *vcpu)
 	return true;
 }
 
-static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code)
+static inline bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
 	if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM) &&
 	    handle_tx2_tvm(vcpu))
@@ -588,13 +782,13 @@ static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code)
 	    __vgic_v3_perform_cpuif_access(vcpu) == 1)
 		return true;
 
-	if (kvm_hyp_handle_cntpct(vcpu))
+	if (kvm_handle_cntxct(vcpu))
 		return true;
 
 	return false;
 }
 
-static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code)
+static inline bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
 	if (static_branch_unlikely(&vgic_v3_cpuif_trap) &&
 	    __vgic_v3_perform_cpuif_access(vcpu) == 1)
@@ -603,19 +797,18 @@ static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code)
 	return false;
 }
 
-static bool kvm_hyp_handle_memory_fault(struct kvm_vcpu *vcpu, u64 *exit_code)
+static inline bool kvm_hyp_handle_memory_fault(struct kvm_vcpu *vcpu,
+					       u64 *exit_code)
 {
 	if (!__populate_fault_info(vcpu))
 		return true;
 
 	return false;
 }
-static bool kvm_hyp_handle_iabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
-	__alias(kvm_hyp_handle_memory_fault);
-static bool kvm_hyp_handle_watchpt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
-	__alias(kvm_hyp_handle_memory_fault);
+#define kvm_hyp_handle_iabt_low		kvm_hyp_handle_memory_fault
+#define kvm_hyp_handle_watchpt_low	kvm_hyp_handle_memory_fault
 
-static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
+static inline bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
 	if (kvm_hyp_handle_memory_fault(vcpu, exit_code))
 		return true;
@@ -645,23 +838,16 @@ static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
 
 typedef bool (*exit_handler_fn)(struct kvm_vcpu *, u64 *);
 
-static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu);
-
-static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code);
-
 /*
  * Allow the hypervisor to handle the exit with an exit handler if it has one.
  *
  * Returns true if the hypervisor handled the exit, and control should go back
  * to the guest, or false if it hasn't.
  */
-static inline bool kvm_hyp_handle_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
+static inline bool kvm_hyp_handle_exit(struct kvm_vcpu *vcpu, u64 *exit_code,
+				       const exit_handler_fn *handlers)
 {
-	const exit_handler_fn *handlers = kvm_get_exit_handler_array(vcpu);
-	exit_handler_fn fn;
-
-	fn = handlers[kvm_vcpu_trap_get_class(vcpu)];
-
+	exit_handler_fn fn = handlers[kvm_vcpu_trap_get_class(vcpu)];
 	if (fn)
 		return fn(vcpu, exit_code);
 
@@ -691,20 +877,9 @@ static inline void synchronize_vcpu_pstate(struct kvm_vcpu *vcpu, u64 *exit_code
  * the guest, false when we should restore the host state and return to the
  * main run loop.
  */
-static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
+static inline bool __fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code,
+				      const exit_handler_fn *handlers)
 {
-	/*
-	 * Save PSTATE early so that we can evaluate the vcpu mode
-	 * early on.
-	 */
-	synchronize_vcpu_pstate(vcpu, exit_code);
-
-	/*
-	 * Check whether we want to repaint the state one way or
-	 * another.
-	 */
-	early_exit_filter(vcpu, exit_code);
-
 	if (ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ)
 		vcpu->arch.fault.esr_el2 = read_sysreg_el2(SYS_ESR);
 
@@ -734,7 +909,7 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 		goto exit;
 
 	/* Check if there's an exit handler and allow it to handle the exit. */
-	if (kvm_hyp_handle_exit(vcpu, exit_code))
+	if (kvm_hyp_handle_exit(vcpu, exit_code, handlers))
 		goto guest;
 exit:
 	/* Return to the host kernel and handle the exit */
diff --git a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
index a651c43ad679..a17cbe7582de 100644
--- a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
+++ b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
@@ -18,9 +18,45 @@
 
 static inline bool ctxt_has_s1poe(struct kvm_cpu_context *ctxt);
 
+static inline struct kvm_vcpu *ctxt_to_vcpu(struct kvm_cpu_context *ctxt)
+{
+	struct kvm_vcpu *vcpu = ctxt->__hyp_running_vcpu;
+
+	if (!vcpu)
+		vcpu = container_of(ctxt, struct kvm_vcpu, arch.ctxt);
+
+	return vcpu;
+}
+
+static inline bool ctxt_is_guest(struct kvm_cpu_context *ctxt)
+{
+	return host_data_ptr(host_ctxt) != ctxt;
+}
+
+static inline u64 *ctxt_mdscr_el1(struct kvm_cpu_context *ctxt)
+{
+	struct kvm_vcpu *vcpu = ctxt_to_vcpu(ctxt);
+
+	if (ctxt_is_guest(ctxt) && kvm_host_owns_debug_regs(vcpu))
+		return &vcpu->arch.external_mdscr_el1;
+
+	return &ctxt_sys_reg(ctxt, MDSCR_EL1);
+}
+
+static inline u64 ctxt_midr_el1(struct kvm_cpu_context *ctxt)
+{
+	struct kvm *kvm = kern_hyp_va(ctxt_to_vcpu(ctxt)->kvm);
+
+	if (!(ctxt_is_guest(ctxt) &&
+	      test_bit(KVM_ARCH_FLAG_WRITABLE_IMP_ID_REGS, &kvm->arch.flags)))
+		return read_cpuid_id();
+
+	return kvm_read_vm_id_reg(kvm, SYS_MIDR_EL1);
+}
+
 static inline void __sysreg_save_common_state(struct kvm_cpu_context *ctxt)
 {
-	ctxt_sys_reg(ctxt, MDSCR_EL1)	= read_sysreg(mdscr_el1);
+	*ctxt_mdscr_el1(ctxt)	= read_sysreg(mdscr_el1);
 
 	// POR_EL0 can affect uaccess, so must be saved/restored early.
 	if (ctxt_has_s1poe(ctxt))
@@ -33,16 +69,6 @@ static inline void __sysreg_save_user_state(struct kvm_cpu_context *ctxt)
 	ctxt_sys_reg(ctxt, TPIDRRO_EL0)	= read_sysreg(tpidrro_el0);
 }
 
-static inline struct kvm_vcpu *ctxt_to_vcpu(struct kvm_cpu_context *ctxt)
-{
-	struct kvm_vcpu *vcpu = ctxt->__hyp_running_vcpu;
-
-	if (!vcpu)
-		vcpu = container_of(ctxt, struct kvm_vcpu, arch.ctxt);
-
-	return vcpu;
-}
-
 static inline bool ctxt_has_mte(struct kvm_cpu_context *ctxt)
 {
 	struct kvm_vcpu *vcpu = ctxt_to_vcpu(ctxt);
@@ -83,6 +109,28 @@ static inline bool ctxt_has_s1poe(struct kvm_cpu_context *ctxt)
 	return kvm_has_s1poe(kern_hyp_va(vcpu->kvm));
 }
 
+static inline bool ctxt_has_ras(struct kvm_cpu_context *ctxt)
+{
+	struct kvm_vcpu *vcpu;
+
+	if (!cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
+		return false;
+
+	vcpu = ctxt_to_vcpu(ctxt);
+	return kvm_has_ras(kern_hyp_va(vcpu->kvm));
+}
+
+static inline bool ctxt_has_sctlr2(struct kvm_cpu_context *ctxt)
+{
+	struct kvm_vcpu *vcpu;
+
+	if (!cpus_have_final_cap(ARM64_HAS_SCTLR2))
+		return false;
+
+	vcpu = ctxt_to_vcpu(ctxt);
+	return kvm_has_sctlr2(kern_hyp_va(vcpu->kvm));
+}
+
 static inline void __sysreg_save_el1_state(struct kvm_cpu_context *ctxt)
 {
 	ctxt_sys_reg(ctxt, SCTLR_EL1)	= read_sysreg_el1(SYS_SCTLR);
@@ -121,6 +169,9 @@ static inline void __sysreg_save_el1_state(struct kvm_cpu_context *ctxt)
 	ctxt_sys_reg(ctxt, SP_EL1)	= read_sysreg(sp_el1);
 	ctxt_sys_reg(ctxt, ELR_EL1)	= read_sysreg_el1(SYS_ELR);
 	ctxt_sys_reg(ctxt, SPSR_EL1)	= read_sysreg_el1(SYS_SPSR);
+
+	if (ctxt_has_sctlr2(ctxt))
+		ctxt_sys_reg(ctxt, SCTLR2_EL1) = read_sysreg_el1(SYS_SCTLR2);
 }
 
 static inline void __sysreg_save_el2_return_state(struct kvm_cpu_context *ctxt)
@@ -133,13 +184,18 @@ static inline void __sysreg_save_el2_return_state(struct kvm_cpu_context *ctxt)
 	if (!has_vhe() && ctxt->__hyp_running_vcpu)
 		ctxt->regs.pstate	= read_sysreg_el2(SYS_SPSR);
 
-	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
+	if (!cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
+		return;
+
+	if (!vserror_state_is_nested(ctxt_to_vcpu(ctxt)))
 		ctxt_sys_reg(ctxt, DISR_EL1) = read_sysreg_s(SYS_VDISR_EL2);
+	else if (ctxt_has_ras(ctxt))
+		ctxt_sys_reg(ctxt, VDISR_EL2) = read_sysreg_s(SYS_VDISR_EL2);
 }
 
 static inline void __sysreg_restore_common_state(struct kvm_cpu_context *ctxt)
 {
-	write_sysreg(ctxt_sys_reg(ctxt, MDSCR_EL1),  mdscr_el1);
+	write_sysreg(*ctxt_mdscr_el1(ctxt),  mdscr_el1);
 
 	// POR_EL0 can affect uaccess, so must be saved/restored early.
 	if (ctxt_has_s1poe(ctxt))
@@ -153,8 +209,9 @@ static inline void __sysreg_restore_user_state(struct kvm_cpu_context *ctxt)
 }
 
 static inline void __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt,
-					      u64 mpidr)
+					      u64 midr, u64 mpidr)
 {
+	write_sysreg(midr,				vpidr_el2);
 	write_sysreg(mpidr,				vmpidr_el2);
 
 	if (has_vhe() ||
@@ -225,6 +282,9 @@ static inline void __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt,
 	write_sysreg(ctxt_sys_reg(ctxt, SP_EL1),	sp_el1);
 	write_sysreg_el1(ctxt_sys_reg(ctxt, ELR_EL1),	SYS_ELR);
 	write_sysreg_el1(ctxt_sys_reg(ctxt, SPSR_EL1),	SYS_SPSR);
+
+	if (ctxt_has_sctlr2(ctxt))
+		write_sysreg_el1(ctxt_sys_reg(ctxt, SCTLR2_EL1), SYS_SCTLR2);
 }
 
 /* Read the VCPU state's PSTATE, but translate (v)EL2 to EL1. */
@@ -248,6 +308,7 @@ static inline void __sysreg_restore_el2_return_state(struct kvm_cpu_context *ctx
 {
 	u64 pstate = to_hw_pstate(ctxt);
 	u64 mode = pstate & PSR_AA32_MODE_MASK;
+	u64 vdisr;
 
 	/*
 	 * Safety check to ensure we're setting the CPU up to enter the guest
@@ -266,8 +327,17 @@ static inline void __sysreg_restore_el2_return_state(struct kvm_cpu_context *ctx
 	write_sysreg_el2(ctxt->regs.pc,			SYS_ELR);
 	write_sysreg_el2(pstate,			SYS_SPSR);
 
-	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
-		write_sysreg_s(ctxt_sys_reg(ctxt, DISR_EL1), SYS_VDISR_EL2);
+	if (!cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
+		return;
+
+	if (!vserror_state_is_nested(ctxt_to_vcpu(ctxt)))
+		vdisr = ctxt_sys_reg(ctxt, DISR_EL1);
+	else if (ctxt_has_ras(ctxt))
+		vdisr = ctxt_sys_reg(ctxt, VDISR_EL2);
+	else
+		vdisr = 0;
+
+	write_sysreg_s(vdisr, SYS_VDISR_EL2);
 }
 
 static inline void __sysreg32_save_state(struct kvm_vcpu *vcpu)
@@ -280,11 +350,11 @@ static inline void __sysreg32_save_state(struct kvm_vcpu *vcpu)
 	vcpu->arch.ctxt.spsr_irq = read_sysreg(spsr_irq);
 	vcpu->arch.ctxt.spsr_fiq = read_sysreg(spsr_fiq);
 
-	__vcpu_sys_reg(vcpu, DACR32_EL2) = read_sysreg(dacr32_el2);
-	__vcpu_sys_reg(vcpu, IFSR32_EL2) = read_sysreg(ifsr32_el2);
+	__vcpu_assign_sys_reg(vcpu, DACR32_EL2, read_sysreg(dacr32_el2));
+	__vcpu_assign_sys_reg(vcpu, IFSR32_EL2, read_sysreg(ifsr32_el2));
 
-	if (has_vhe() || vcpu_get_flag(vcpu, DEBUG_DIRTY))
-		__vcpu_sys_reg(vcpu, DBGVCR32_EL2) = read_sysreg(dbgvcr32_el2);
+	if (has_vhe() || kvm_debug_regs_in_use(vcpu))
+		__vcpu_assign_sys_reg(vcpu, DBGVCR32_EL2, read_sysreg(dbgvcr32_el2));
 }
 
 static inline void __sysreg32_restore_state(struct kvm_vcpu *vcpu)
@@ -300,7 +370,7 @@ static inline void __sysreg32_restore_state(struct kvm_vcpu *vcpu)
 	write_sysreg(__vcpu_sys_reg(vcpu, DACR32_EL2), dacr32_el2);
 	write_sysreg(__vcpu_sys_reg(vcpu, IFSR32_EL2), ifsr32_el2);
 
-	if (has_vhe() || vcpu_get_flag(vcpu, DEBUG_DIRTY))
+	if (has_vhe() || kvm_debug_regs_in_use(vcpu))
 		write_sysreg(__vcpu_sys_reg(vcpu, DBGVCR32_EL2), dbgvcr32_el2);
 }
 
diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
deleted file mode 100644
index f957890c7e38..000000000000
--- a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2021 Google LLC
- * Author: Fuad Tabba <tabba@google.com>
- */
-
-#ifndef __ARM64_KVM_FIXED_CONFIG_H__
-#define __ARM64_KVM_FIXED_CONFIG_H__
-
-#include <asm/sysreg.h>
-
-/*
- * This file contains definitions for features to be allowed or restricted for
- * guest virtual machines, depending on the mode KVM is running in and on the
- * type of guest that is running.
- *
- * The ALLOW masks represent a bitmask of feature fields that are allowed
- * without any restrictions as long as they are supported by the system.
- *
- * The RESTRICT_UNSIGNED masks, if present, represent unsigned fields for
- * features that are restricted to support at most the specified feature.
- *
- * If a feature field is not present in either, than it is not supported.
- *
- * The approach taken for protected VMs is to allow features that are:
- * - Needed by common Linux distributions (e.g., floating point)
- * - Trivial to support, e.g., supporting the feature does not introduce or
- * require tracking of additional state in KVM
- * - Cannot be trapped or prevent the guest from using anyway
- */
-
-/*
- * Allow for protected VMs:
- * - Floating-point and Advanced SIMD
- * - Data Independent Timing
- * - Spectre/Meltdown Mitigation
- */
-#define PVM_ID_AA64PFR0_ALLOW (\
-	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_FP) | \
-	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AdvSIMD) | \
-	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_DIT) | \
-	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) | \
-	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3) \
-	)
-
-/*
- * Restrict to the following *unsigned* features for protected VMs:
- * - AArch64 guests only (no support for AArch32 guests):
- *	AArch32 adds complexity in trap handling, emulation, condition codes,
- *	etc...
- * - RAS (v1)
- *	Supported by KVM
- */
-#define PVM_ID_AA64PFR0_RESTRICT_UNSIGNED (\
-	SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, EL0, IMP) | \
-	SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, EL1, IMP) | \
-	SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, EL2, IMP) | \
-	SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, EL3, IMP) | \
-	SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, RAS, IMP) \
-	)
-
-/*
- * Allow for protected VMs:
- * - Branch Target Identification
- * - Speculative Store Bypassing
- */
-#define PVM_ID_AA64PFR1_ALLOW (\
-	ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_BT) | \
-	ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SSBS) \
-	)
-
-#define PVM_ID_AA64PFR2_ALLOW 0ULL
-
-/*
- * Allow for protected VMs:
- * - Mixed-endian
- * - Distinction between Secure and Non-secure Memory
- * - Mixed-endian at EL0 only
- * - Non-context synchronizing exception entry and exit
- */
-#define PVM_ID_AA64MMFR0_ALLOW (\
-	ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_BIGEND) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_SNSMEM) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_BIGENDEL0) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_EXS) \
-	)
-
-/*
- * Restrict to the following *unsigned* features for protected VMs:
- * - 40-bit IPA
- * - 16-bit ASID
- */
-#define PVM_ID_AA64MMFR0_RESTRICT_UNSIGNED (\
-	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_PARANGE), ID_AA64MMFR0_EL1_PARANGE_40) | \
-	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_ASIDBITS), ID_AA64MMFR0_EL1_ASIDBITS_16) \
-	)
-
-/*
- * Allow for protected VMs:
- * - Hardware translation table updates to Access flag and Dirty state
- * - Number of VMID bits from CPU
- * - Hierarchical Permission Disables
- * - Privileged Access Never
- * - SError interrupt exceptions from speculative reads
- * - Enhanced Translation Synchronization
- * - Control for cache maintenance permission
- */
-#define PVM_ID_AA64MMFR1_ALLOW (\
-	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HAFDBS) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_VMIDBits) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HPDS) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_PAN) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_SpecSEI) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_CMOW) \
-	)
-
-/*
- * Allow for protected VMs:
- * - Common not Private translations
- * - User Access Override
- * - IESB bit in the SCTLR_ELx registers
- * - Unaligned single-copy atomicity and atomic functions
- * - ESR_ELx.EC value on an exception by read access to feature ID space
- * - TTL field in address operations.
- * - Break-before-make sequences when changing translation block size
- * - E0PDx mechanism
- */
-#define PVM_ID_AA64MMFR2_ALLOW (\
-	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_CnP) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_UAO) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_IESB) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_AT) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_IDS) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_TTL) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_BBM) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_E0PD) \
-	)
-
-#define PVM_ID_AA64MMFR3_ALLOW (0ULL)
-
-/*
- * No support for Scalable Vectors for protected VMs:
- *	Requires additional support from KVM, e.g., context-switching and
- *	trapping at EL2
- */
-#define PVM_ID_AA64ZFR0_ALLOW (0ULL)
-
-/*
- * No support for debug, including breakpoints, and watchpoints for protected
- * VMs:
- *	The Arm architecture mandates support for at least the Armv8 debug
- *	architecture, which would include at least 2 hardware breakpoints and
- *	watchpoints. Providing that support to protected guests adds
- *	considerable state and complexity. Therefore, the reserved value of 0 is
- *	used for debug-related fields.
- */
-#define PVM_ID_AA64DFR0_ALLOW (0ULL)
-#define PVM_ID_AA64DFR1_ALLOW (0ULL)
-
-/*
- * No support for implementation defined features.
- */
-#define PVM_ID_AA64AFR0_ALLOW (0ULL)
-#define PVM_ID_AA64AFR1_ALLOW (0ULL)
-
-/*
- * No restrictions on instructions implemented in AArch64.
- */
-#define PVM_ID_AA64ISAR0_ALLOW (\
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_AES) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_SHA1) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_SHA2) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_CRC32) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_ATOMIC) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_RDM) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_SHA3) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_SM3) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_SM4) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_DP) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_FHM) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_TS) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_TLB) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_RNDR) \
-	)
-
-/* Restrict pointer authentication to the basic version. */
-#define PVM_ID_AA64ISAR1_RESTRICT_UNSIGNED (\
-	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA), ID_AA64ISAR1_EL1_APA_PAuth) | \
-	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API), ID_AA64ISAR1_EL1_API_PAuth) \
-	)
-
-#define PVM_ID_AA64ISAR2_RESTRICT_UNSIGNED (\
-	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3), ID_AA64ISAR2_EL1_APA3_PAuth) \
-	)
-
-#define PVM_ID_AA64ISAR1_ALLOW (\
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_DPB) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_JSCVT) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_FCMA) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_LRCPC) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_FRINTTS) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_SB) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_SPECRES) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_BF16) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_DGH) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_I8MM) \
-	)
-
-#define PVM_ID_AA64ISAR2_ALLOW (\
-	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_ATS1A)| \
-	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_MOPS) \
-	)
-
-u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id);
-bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code);
-bool kvm_handle_pvm_restricted(struct kvm_vcpu *vcpu, u64 *exit_code);
-int kvm_check_pvm_sysreg_table(void);
-
-#endif /* __ARM64_KVM_FIXED_CONFIG_H__ */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/gfp.h b/arch/arm64/kvm/hyp/include/nvhe/gfp.h
index 97c527ef53c2..3766333bace9 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/gfp.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/gfp.h
@@ -7,7 +7,7 @@
 #include <nvhe/memory.h>
 #include <nvhe/spinlock.h>
 
-#define HYP_NO_ORDER	USHRT_MAX
+#define HYP_NO_ORDER	((u8)(~0))
 
 struct hyp_pool {
 	/*
@@ -19,11 +19,11 @@ struct hyp_pool {
 	struct list_head free_area[NR_PAGE_ORDERS];
 	phys_addr_t range_start;
 	phys_addr_t range_end;
-	unsigned short max_order;
+	u8 max_order;
 };
 
 /* Allocation */
-void *hyp_alloc_pages(struct hyp_pool *pool, unsigned short order);
+void *hyp_alloc_pages(struct hyp_pool *pool, u8 order);
 void hyp_split_page(struct hyp_page *page);
 void hyp_get_page(struct hyp_pool *pool, void *addr);
 void hyp_put_page(struct hyp_pool *pool, void *addr);
diff --git a/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h b/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
index 0972faccc2af..5f9d56754e39 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
@@ -11,40 +11,10 @@
 #include <asm/kvm_mmu.h>
 #include <asm/kvm_pgtable.h>
 #include <asm/virt.h>
+#include <nvhe/memory.h>
 #include <nvhe/pkvm.h>
 #include <nvhe/spinlock.h>
 
-/*
- * SW bits 0-1 are reserved to track the memory ownership state of each page:
- *   00: The page is owned exclusively by the page-table owner.
- *   01: The page is owned by the page-table owner, but is shared
- *       with another entity.
- *   10: The page is shared with, but not owned by the page-table owner.
- *   11: Reserved for future use (lending).
- */
-enum pkvm_page_state {
-	PKVM_PAGE_OWNED			= 0ULL,
-	PKVM_PAGE_SHARED_OWNED		= KVM_PGTABLE_PROT_SW0,
-	PKVM_PAGE_SHARED_BORROWED	= KVM_PGTABLE_PROT_SW1,
-	__PKVM_PAGE_RESERVED		= KVM_PGTABLE_PROT_SW0 |
-					  KVM_PGTABLE_PROT_SW1,
-
-	/* Meta-states which aren't encoded directly in the PTE's SW bits */
-	PKVM_NOPAGE,
-};
-
-#define PKVM_PAGE_STATE_PROT_MASK	(KVM_PGTABLE_PROT_SW0 | KVM_PGTABLE_PROT_SW1)
-static inline enum kvm_pgtable_prot pkvm_mkstate(enum kvm_pgtable_prot prot,
-						 enum pkvm_page_state state)
-{
-	return (prot & ~PKVM_PAGE_STATE_PROT_MASK) | state;
-}
-
-static inline enum pkvm_page_state pkvm_getstate(enum kvm_pgtable_prot prot)
-{
-	return prot & PKVM_PAGE_STATE_PROT_MASK;
-}
-
 struct host_mmu {
 	struct kvm_arch arch;
 	struct kvm_pgtable pgt;
@@ -69,6 +39,13 @@ int __pkvm_host_donate_hyp(u64 pfn, u64 nr_pages);
 int __pkvm_hyp_donate_host(u64 pfn, u64 nr_pages);
 int __pkvm_host_share_ffa(u64 pfn, u64 nr_pages);
 int __pkvm_host_unshare_ffa(u64 pfn, u64 nr_pages);
+int __pkvm_host_share_guest(u64 pfn, u64 gfn, u64 nr_pages, struct pkvm_hyp_vcpu *vcpu,
+			    enum kvm_pgtable_prot prot);
+int __pkvm_host_unshare_guest(u64 gfn, u64 nr_pages, struct pkvm_hyp_vm *hyp_vm);
+int __pkvm_host_relax_perms_guest(u64 gfn, struct pkvm_hyp_vcpu *vcpu, enum kvm_pgtable_prot prot);
+int __pkvm_host_wrprotect_guest(u64 gfn, u64 nr_pages, struct pkvm_hyp_vm *hyp_vm);
+int __pkvm_host_test_clear_young_guest(u64 gfn, u64 nr_pages, bool mkold, struct pkvm_hyp_vm *vm);
+int __pkvm_host_mkyoung_guest(u64 gfn, struct pkvm_hyp_vcpu *vcpu);
 
 bool addr_is_memory(phys_addr_t phys);
 int host_stage2_idmap_locked(phys_addr_t addr, u64 size, enum kvm_pgtable_prot prot);
@@ -79,7 +56,7 @@ void handle_host_mem_abort(struct kvm_cpu_context *host_ctxt);
 
 int hyp_pin_shared_mem(void *from, void *to);
 void hyp_unpin_shared_mem(void *from, void *to);
-void reclaim_guest_pages(struct pkvm_hyp_vm *vm, struct kvm_hyp_memcache *mc);
+void reclaim_pgtable_pages(struct pkvm_hyp_vm *vm, struct kvm_hyp_memcache *mc);
 int refill_memcache(struct kvm_hyp_memcache *mc, unsigned long min_pages,
 		    struct kvm_hyp_memcache *host_mc);
 
@@ -90,4 +67,10 @@ static __always_inline void __load_host_stage2(void)
 	else
 		write_sysreg(0, vttbr_el2);
 }
+
+#ifdef CONFIG_NVHE_EL2_DEBUG
+void pkvm_ownership_selftest(void *base);
+#else
+static inline void pkvm_ownership_selftest(void *base) { }
+#endif
 #endif /* __KVM_NVHE_MEM_PROTECT__ */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/memory.h b/arch/arm64/kvm/hyp/include/nvhe/memory.h
index ab205c4d6774..dee1a406b0c2 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/memory.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/memory.h
@@ -7,9 +7,61 @@
 
 #include <linux/types.h>
 
+/*
+ * Bits 0-1 are used to encode the memory ownership state of each page from the
+ * point of view of a pKVM "component" (host, hyp, guest, ... see enum
+ * pkvm_component_id):
+ *   00: The page is owned and exclusively accessible by the component;
+ *   01: The page is owned and accessible by the component, but is also
+ *       accessible by another component;
+ *   10: The page is accessible but not owned by the component;
+ * The storage of this state depends on the component: either in the
+ * hyp_vmemmap for the host and hyp states or in PTE software bits for guests.
+ */
+enum pkvm_page_state {
+	PKVM_PAGE_OWNED			= 0ULL,
+	PKVM_PAGE_SHARED_OWNED		= BIT(0),
+	PKVM_PAGE_SHARED_BORROWED	= BIT(1),
+
+	/*
+	 * 'Meta-states' are not stored directly in PTE SW bits for guest
+	 * states, but inferred from the context (e.g. invalid PTE entries).
+	 * For the host and hyp, meta-states are stored directly in the
+	 * struct hyp_page.
+	 */
+	PKVM_NOPAGE			= BIT(0) | BIT(1),
+};
+#define PKVM_PAGE_STATE_MASK		(BIT(0) | BIT(1))
+
+#define PKVM_PAGE_STATE_PROT_MASK	(KVM_PGTABLE_PROT_SW0 | KVM_PGTABLE_PROT_SW1)
+static inline enum kvm_pgtable_prot pkvm_mkstate(enum kvm_pgtable_prot prot,
+						 enum pkvm_page_state state)
+{
+	prot &= ~PKVM_PAGE_STATE_PROT_MASK;
+	prot |= FIELD_PREP(PKVM_PAGE_STATE_PROT_MASK, state);
+	return prot;
+}
+
+static inline enum pkvm_page_state pkvm_getstate(enum kvm_pgtable_prot prot)
+{
+	return FIELD_GET(PKVM_PAGE_STATE_PROT_MASK, prot);
+}
+
 struct hyp_page {
-	unsigned short refcount;
-	unsigned short order;
+	u16 refcount;
+	u8 order;
+
+	/* Host state. Guarded by the host stage-2 lock. */
+	unsigned __host_state : 4;
+
+	/*
+	 * Complement of the hyp state. Guarded by the hyp stage-1 lock. We use
+	 * the complement so that the initial 0 in __hyp_state_comp (due to the
+	 * entire vmemmap starting off zeroed) encodes PKVM_NOPAGE.
+	 */
+	unsigned __hyp_state_comp : 4;
+
+	u32 host_share_guest_count;
 };
 
 extern u64 __hyp_vmemmap;
@@ -29,7 +81,13 @@ static inline phys_addr_t hyp_virt_to_phys(void *addr)
 
 #define hyp_phys_to_pfn(phys)	((phys) >> PAGE_SHIFT)
 #define hyp_pfn_to_phys(pfn)	((phys_addr_t)((pfn) << PAGE_SHIFT))
-#define hyp_phys_to_page(phys)	(&hyp_vmemmap[hyp_phys_to_pfn(phys)])
+
+static inline struct hyp_page *hyp_phys_to_page(phys_addr_t phys)
+{
+	BUILD_BUG_ON(sizeof(struct hyp_page) != sizeof(u64));
+	return &hyp_vmemmap[hyp_phys_to_pfn(phys)];
+}
+
 #define hyp_virt_to_page(virt)	hyp_phys_to_page(__hyp_pa(virt))
 #define hyp_virt_to_pfn(virt)	hyp_phys_to_pfn(__hyp_pa(virt))
 
@@ -38,6 +96,26 @@ static inline phys_addr_t hyp_virt_to_phys(void *addr)
 #define hyp_page_to_virt(page)	__hyp_va(hyp_page_to_phys(page))
 #define hyp_page_to_pool(page)	(((struct hyp_page *)page)->pool)
 
+static inline enum pkvm_page_state get_host_state(struct hyp_page *p)
+{
+	return p->__host_state;
+}
+
+static inline void set_host_state(struct hyp_page *p, enum pkvm_page_state state)
+{
+	p->__host_state = state;
+}
+
+static inline enum pkvm_page_state get_hyp_state(struct hyp_page *p)
+{
+	return p->__hyp_state_comp ^ PKVM_PAGE_STATE_MASK;
+}
+
+static inline void set_hyp_state(struct hyp_page *p, enum pkvm_page_state state)
+{
+	p->__hyp_state_comp = state ^ PKVM_PAGE_STATE_MASK;
+}
+
 /*
  * Refcounting for 'struct hyp_page'.
  * hyp_pool::lock must be held if atomic access to the refcount is required.
diff --git a/arch/arm64/kvm/hyp/include/nvhe/mm.h b/arch/arm64/kvm/hyp/include/nvhe/mm.h
index 230e4f2527de..6e83ce35c2f2 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/mm.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/mm.h
@@ -13,9 +13,11 @@
 extern struct kvm_pgtable pkvm_pgtable;
 extern hyp_spinlock_t pkvm_pgd_lock;
 
-int hyp_create_pcpu_fixmap(void);
+int hyp_create_fixmap(void);
 void *hyp_fixmap_map(phys_addr_t phys);
 void hyp_fixmap_unmap(void);
+void *hyp_fixblock_map(phys_addr_t phys, size_t *size);
+void hyp_fixblock_unmap(void);
 
 int hyp_create_idmap(u32 hyp_va_bits);
 int hyp_map_vectors(void);
diff --git a/arch/arm64/kvm/hyp/include/nvhe/pkvm.h b/arch/arm64/kvm/hyp/include/nvhe/pkvm.h
index 24a9a8330d19..184ad7a39950 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/pkvm.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/pkvm.h
@@ -20,10 +20,16 @@ struct pkvm_hyp_vcpu {
 
 	/* Backpointer to the host's (untrusted) vCPU instance. */
 	struct kvm_vcpu *host_vcpu;
+
+	/*
+	 * If this hyp vCPU is loaded, then this is a backpointer to the
+	 * per-cpu pointer tracking us. Otherwise, NULL if not loaded.
+	 */
+	struct pkvm_hyp_vcpu **loaded_hyp_vcpu;
 };
 
 /*
- * Holds the relevant data for running a protected vm.
+ * Holds the relevant data for running a vm in protected mode.
  */
 struct pkvm_hyp_vm {
 	struct kvm kvm;
@@ -37,16 +43,12 @@ struct pkvm_hyp_vm {
 	struct hyp_pool pool;
 	hyp_spinlock_t lock;
 
-	/*
-	 * The number of vcpus initialized and ready to run.
-	 * Modifying this is protected by 'vm_table_lock'.
-	 */
-	unsigned int nr_vcpus;
-
 	/* Array of the hyp vCPU structures for this VM. */
 	struct pkvm_hyp_vcpu *vcpus[];
 };
 
+extern hyp_spinlock_t vm_table_lock;
+
 static inline struct pkvm_hyp_vm *
 pkvm_hyp_vcpu_to_hyp_vm(struct pkvm_hyp_vcpu *hyp_vcpu)
 {
@@ -58,8 +60,15 @@ static inline bool pkvm_hyp_vcpu_is_protected(struct pkvm_hyp_vcpu *hyp_vcpu)
 	return vcpu_is_protected(&hyp_vcpu->vcpu);
 }
 
+static inline bool pkvm_hyp_vm_is_protected(struct pkvm_hyp_vm *hyp_vm)
+{
+	return kvm_vm_is_protected(&hyp_vm->kvm);
+}
+
 void pkvm_hyp_vm_table_init(void *tbl);
 
+int __pkvm_reserve_vm(void);
+void __pkvm_unreserve_vm(pkvm_handle_t handle);
 int __pkvm_init_vm(struct kvm *host_kvm, unsigned long vm_hva,
 		   unsigned long pgd_hva);
 int __pkvm_init_vcpu(pkvm_handle_t handle, struct kvm_vcpu *host_vcpu,
@@ -69,5 +78,15 @@ int __pkvm_teardown_vm(pkvm_handle_t handle);
 struct pkvm_hyp_vcpu *pkvm_load_hyp_vcpu(pkvm_handle_t handle,
 					 unsigned int vcpu_idx);
 void pkvm_put_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu);
+struct pkvm_hyp_vcpu *pkvm_get_loaded_hyp_vcpu(void);
+
+struct pkvm_hyp_vm *get_pkvm_hyp_vm(pkvm_handle_t handle);
+struct pkvm_hyp_vm *get_np_pkvm_hyp_vm(pkvm_handle_t handle);
+void put_pkvm_hyp_vm(struct pkvm_hyp_vm *hyp_vm);
+
+bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code);
+bool kvm_handle_pvm_restricted(struct kvm_vcpu *vcpu, u64 *exit_code);
+void kvm_init_pvm_id_regs(struct kvm_vcpu *vcpu);
+int kvm_check_pvm_sysreg_table(void);
 
 #endif /* __ARM64_KVM_NVHE_PKVM_H__ */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h b/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h
index 1e6d995968a1..ba5382c12787 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h
@@ -12,7 +12,8 @@
 #include <asm/kvm_host.h>
 
 #define cpu_reg(ctxt, r)	(ctxt)->regs.regs[r]
-#define DECLARE_REG(type, name, ctxt, reg)	\
+#define DECLARE_REG(type, name, ctxt, reg)					\
+				__always_unused int ___check_reg_ ## reg;	\
 				type name = (type)cpu_reg(ctxt, (reg))
 
 #endif /* __ARM64_KVM_NVHE_TRAP_HANDLER_H__ */
diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
index b43426a493df..a244ec25f8c5 100644
--- a/arch/arm64/kvm/hyp/nvhe/Makefile
+++ b/arch/arm64/kvm/hyp/nvhe/Makefile
@@ -12,7 +12,7 @@ asflags-y := -D__KVM_NVHE_HYPERVISOR__ -D__DISABLE_EXPORTS
 ccflags-y := -D__KVM_NVHE_HYPERVISOR__ -D__DISABLE_EXPORTS -D__DISABLE_TRACE_MMIO__
 ccflags-y += -fno-stack-protector	\
 	     -DDISABLE_BRANCH_PROFILING	\
-	     $(DISABLE_STACKLEAK_PLUGIN)
+	     $(DISABLE_KSTACK_ERASE)
 
 hostprogs := gen-hyprel
 HOST_EXTRACFLAGS += -I$(objtree)/include
@@ -27,6 +27,7 @@ hyp-obj-y := timer-sr.o sysreg-sr.o debug-sr.o switch.o tlb.o hyp-init.o host.o
 	 cache.o setup.o mm.o mem_protect.o sys_regs.o pkvm.o stacktrace.o ffa.o
 hyp-obj-y += ../vgic-v3-sr.o ../aarch32.o ../vgic-v2-cpuif-proxy.o ../entry.o \
 	 ../fpsimd.o ../hyp-entry.o ../exception.o ../pgtable.o
+hyp-obj-y += ../../../kernel/smccc-call.o
 hyp-obj-$(CONFIG_LIST_HARDENED) += list_debug.o
 hyp-obj-y += $(lib-objs)
 
@@ -99,3 +100,9 @@ KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS), $(KBUILD_CFLAG
 # causes a build failure. Remove profile optimization flags.
 KBUILD_CFLAGS := $(filter-out -fprofile-sample-use=% -fprofile-use=%, $(KBUILD_CFLAGS))
 KBUILD_CFLAGS += -fno-asynchronous-unwind-tables -fno-unwind-tables
+
+ifeq ($(CONFIG_UBSAN_KVM_EL2),y)
+UBSAN_SANITIZE := y
+# Always use brk and not hooks
+ccflags-y += $(CFLAGS_UBSAN_TRAP)
+endif
diff --git a/arch/arm64/kvm/hyp/nvhe/debug-sr.c b/arch/arm64/kvm/hyp/nvhe/debug-sr.c
index 53efda0235cf..2a1c0f49792b 100644
--- a/arch/arm64/kvm/hyp/nvhe/debug-sr.c
+++ b/arch/arm64/kvm/hyp/nvhe/debug-sr.c
@@ -51,42 +51,85 @@ static void __debug_restore_spe(u64 pmscr_el1)
 	write_sysreg_el1(pmscr_el1, SYS_PMSCR);
 }
 
-static void __debug_save_trace(u64 *trfcr_el1)
+static void __trace_do_switch(u64 *saved_trfcr, u64 new_trfcr)
 {
-	*trfcr_el1 = 0;
+	*saved_trfcr = read_sysreg_el1(SYS_TRFCR);
+	write_sysreg_el1(new_trfcr, SYS_TRFCR);
+}
+
+static bool __trace_needs_drain(void)
+{
+	if (is_protected_kvm_enabled() && host_data_test_flag(HAS_TRBE))
+		return read_sysreg_s(SYS_TRBLIMITR_EL1) & TRBLIMITR_EL1_E;
+
+	return host_data_test_flag(TRBE_ENABLED);
+}
+
+static bool __trace_needs_switch(void)
+{
+	return host_data_test_flag(TRBE_ENABLED) ||
+	       host_data_test_flag(EL1_TRACING_CONFIGURED);
+}
+
+static void __trace_switch_to_guest(void)
+{
+	/* Unsupported with TRBE so disable */
+	if (host_data_test_flag(TRBE_ENABLED))
+		*host_data_ptr(trfcr_while_in_guest) = 0;
+
+	__trace_do_switch(host_data_ptr(host_debug_state.trfcr_el1),
+			  *host_data_ptr(trfcr_while_in_guest));
+
+	if (__trace_needs_drain()) {
+		isb();
+		tsb_csync();
+	}
+}
 
-	/* Check if the TRBE is enabled */
-	if (!(read_sysreg_s(SYS_TRBLIMITR_EL1) & TRBLIMITR_EL1_E))
+static void __trace_switch_to_host(void)
+{
+	__trace_do_switch(host_data_ptr(trfcr_while_in_guest),
+			  *host_data_ptr(host_debug_state.trfcr_el1));
+}
+
+static void __debug_save_brbe(u64 *brbcr_el1)
+{
+	*brbcr_el1 = 0;
+
+	/* Check if the BRBE is enabled */
+	if (!(read_sysreg_el1(SYS_BRBCR) & (BRBCR_ELx_E0BRE | BRBCR_ELx_ExBRE)))
 		return;
+
 	/*
-	 * Prohibit trace generation while we are in guest.
-	 * Since access to TRFCR_EL1 is trapped, the guest can't
+	 * Prohibit branch record generation while we are in guest.
+	 * Since access to BRBCR_EL1 is trapped, the guest can't
 	 * modify the filtering set by the host.
 	 */
-	*trfcr_el1 = read_sysreg_el1(SYS_TRFCR);
-	write_sysreg_el1(0, SYS_TRFCR);
-	isb();
-	/* Drain the trace buffer to memory */
-	tsb_csync();
+	*brbcr_el1 = read_sysreg_el1(SYS_BRBCR);
+	write_sysreg_el1(0, SYS_BRBCR);
 }
 
-static void __debug_restore_trace(u64 trfcr_el1)
+static void __debug_restore_brbe(u64 brbcr_el1)
 {
-	if (!trfcr_el1)
+	if (!brbcr_el1)
 		return;
 
-	/* Restore trace filter controls */
-	write_sysreg_el1(trfcr_el1, SYS_TRFCR);
+	/* Restore BRBE controls */
+	write_sysreg_el1(brbcr_el1, SYS_BRBCR);
 }
 
 void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu)
 {
 	/* Disable and flush SPE data generation */
-	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_SPE))
+	if (host_data_test_flag(HAS_SPE))
 		__debug_save_spe(host_data_ptr(host_debug_state.pmscr_el1));
-	/* Disable and flush Self-Hosted Trace generation */
-	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_TRBE))
-		__debug_save_trace(host_data_ptr(host_debug_state.trfcr_el1));
+
+	/* Disable BRBE branch records */
+	if (host_data_test_flag(HAS_BRBE))
+		__debug_save_brbe(host_data_ptr(host_debug_state.brbcr_el1));
+
+	if (__trace_needs_switch())
+		__trace_switch_to_guest();
 }
 
 void __debug_switch_to_guest(struct kvm_vcpu *vcpu)
@@ -96,18 +139,15 @@ void __debug_switch_to_guest(struct kvm_vcpu *vcpu)
 
 void __debug_restore_host_buffers_nvhe(struct kvm_vcpu *vcpu)
 {
-	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_SPE))
+	if (host_data_test_flag(HAS_SPE))
 		__debug_restore_spe(*host_data_ptr(host_debug_state.pmscr_el1));
-	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_TRBE))
-		__debug_restore_trace(*host_data_ptr(host_debug_state.trfcr_el1));
+	if (host_data_test_flag(HAS_BRBE))
+		__debug_restore_brbe(*host_data_ptr(host_debug_state.brbcr_el1));
+	if (__trace_needs_switch())
+		__trace_switch_to_host();
 }
 
 void __debug_switch_to_host(struct kvm_vcpu *vcpu)
 {
 	__debug_switch_to_host_common(vcpu);
 }
-
-u64 __kvm_get_mdcr_el2(void)
-{
-	return read_sysreg(mdcr_el2);
-}
diff --git a/arch/arm64/kvm/hyp/nvhe/ffa.c b/arch/arm64/kvm/hyp/nvhe/ffa.c
index e433dfab882a..f731cc4c3f28 100644
--- a/arch/arm64/kvm/hyp/nvhe/ffa.c
+++ b/arch/arm64/kvm/hyp/nvhe/ffa.c
@@ -71,36 +71,68 @@ static u32 hyp_ffa_version;
 static bool has_version_negotiated;
 static hyp_spinlock_t version_lock;
 
-static void ffa_to_smccc_error(struct arm_smccc_res *res, u64 ffa_errno)
+static void ffa_to_smccc_error(struct arm_smccc_1_2_regs *res, u64 ffa_errno)
 {
-	*res = (struct arm_smccc_res) {
+	*res = (struct arm_smccc_1_2_regs) {
 		.a0	= FFA_ERROR,
 		.a2	= ffa_errno,
 	};
 }
 
-static void ffa_to_smccc_res_prop(struct arm_smccc_res *res, int ret, u64 prop)
+static void ffa_to_smccc_res_prop(struct arm_smccc_1_2_regs *res, int ret, u64 prop)
 {
 	if (ret == FFA_RET_SUCCESS) {
-		*res = (struct arm_smccc_res) { .a0 = FFA_SUCCESS,
-						.a2 = prop };
+		*res = (struct arm_smccc_1_2_regs) { .a0 = FFA_SUCCESS,
+						      .a2 = prop };
 	} else {
 		ffa_to_smccc_error(res, ret);
 	}
 }
 
-static void ffa_to_smccc_res(struct arm_smccc_res *res, int ret)
+static void ffa_to_smccc_res(struct arm_smccc_1_2_regs *res, int ret)
 {
 	ffa_to_smccc_res_prop(res, ret, 0);
 }
 
 static void ffa_set_retval(struct kvm_cpu_context *ctxt,
-			   struct arm_smccc_res *res)
+			   struct arm_smccc_1_2_regs *res)
 {
 	cpu_reg(ctxt, 0) = res->a0;
 	cpu_reg(ctxt, 1) = res->a1;
 	cpu_reg(ctxt, 2) = res->a2;
 	cpu_reg(ctxt, 3) = res->a3;
+	cpu_reg(ctxt, 4) = res->a4;
+	cpu_reg(ctxt, 5) = res->a5;
+	cpu_reg(ctxt, 6) = res->a6;
+	cpu_reg(ctxt, 7) = res->a7;
+
+	/*
+	 * DEN0028C 2.6: SMC32/HVC32 call from aarch64 must preserve x8-x30.
+	 *
+	 * In FF-A 1.2, we cannot rely on the function ID sent by the caller to
+	 * detect 32-bit calls because the CPU cycle management interfaces (e.g.
+	 * FFA_MSG_WAIT, FFA_RUN) are 32-bit only but can have 64-bit responses.
+	 *
+	 * FFA-1.3 introduces 64-bit variants of the CPU cycle management
+	 * interfaces. Moreover, FF-A 1.3 clarifies that SMC32 direct requests
+	 * complete with SMC32 direct responses which *should* allow us use the
+	 * function ID sent by the caller to determine whether to return x8-x17.
+	 *
+	 * Note that we also cannot rely on function IDs in the response.
+	 *
+	 * Given the above, assume SMC64 and send back x0-x17 unconditionally
+	 * as the passthrough code (__kvm_hyp_host_forward_smc) does the same.
+	 */
+	cpu_reg(ctxt, 8) = res->a8;
+	cpu_reg(ctxt, 9) = res->a9;
+	cpu_reg(ctxt, 10) = res->a10;
+	cpu_reg(ctxt, 11) = res->a11;
+	cpu_reg(ctxt, 12) = res->a12;
+	cpu_reg(ctxt, 13) = res->a13;
+	cpu_reg(ctxt, 14) = res->a14;
+	cpu_reg(ctxt, 15) = res->a15;
+	cpu_reg(ctxt, 16) = res->a16;
+	cpu_reg(ctxt, 17) = res->a17;
 }
 
 static bool is_ffa_call(u64 func_id)
@@ -113,82 +145,92 @@ static bool is_ffa_call(u64 func_id)
 
 static int ffa_map_hyp_buffers(u64 ffa_page_count)
 {
-	struct arm_smccc_res res;
+	struct arm_smccc_1_2_regs res;
 
-	arm_smccc_1_1_smc(FFA_FN64_RXTX_MAP,
-			  hyp_virt_to_phys(hyp_buffers.tx),
-			  hyp_virt_to_phys(hyp_buffers.rx),
-			  ffa_page_count,
-			  0, 0, 0, 0,
-			  &res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+		.a0 = FFA_FN64_RXTX_MAP,
+		.a1 = hyp_virt_to_phys(hyp_buffers.tx),
+		.a2 = hyp_virt_to_phys(hyp_buffers.rx),
+		.a3 = ffa_page_count,
+	}, &res);
 
 	return res.a0 == FFA_SUCCESS ? FFA_RET_SUCCESS : res.a2;
 }
 
 static int ffa_unmap_hyp_buffers(void)
 {
-	struct arm_smccc_res res;
+	struct arm_smccc_1_2_regs res;
 
-	arm_smccc_1_1_smc(FFA_RXTX_UNMAP,
-			  HOST_FFA_ID,
-			  0, 0, 0, 0, 0, 0,
-			  &res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+		.a0 = FFA_RXTX_UNMAP,
+		.a1 = HOST_FFA_ID,
+	}, &res);
 
 	return res.a0 == FFA_SUCCESS ? FFA_RET_SUCCESS : res.a2;
 }
 
-static void ffa_mem_frag_tx(struct arm_smccc_res *res, u32 handle_lo,
+static void ffa_mem_frag_tx(struct arm_smccc_1_2_regs *res, u32 handle_lo,
 			     u32 handle_hi, u32 fraglen, u32 endpoint_id)
 {
-	arm_smccc_1_1_smc(FFA_MEM_FRAG_TX,
-			  handle_lo, handle_hi, fraglen, endpoint_id,
-			  0, 0, 0,
-			  res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+		.a0 = FFA_MEM_FRAG_TX,
+		.a1 = handle_lo,
+		.a2 = handle_hi,
+		.a3 = fraglen,
+		.a4 = endpoint_id,
+	}, res);
 }
 
-static void ffa_mem_frag_rx(struct arm_smccc_res *res, u32 handle_lo,
+static void ffa_mem_frag_rx(struct arm_smccc_1_2_regs *res, u32 handle_lo,
 			     u32 handle_hi, u32 fragoff)
 {
-	arm_smccc_1_1_smc(FFA_MEM_FRAG_RX,
-			  handle_lo, handle_hi, fragoff, HOST_FFA_ID,
-			  0, 0, 0,
-			  res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+		.a0 = FFA_MEM_FRAG_RX,
+		.a1 = handle_lo,
+		.a2 = handle_hi,
+		.a3 = fragoff,
+		.a4 = HOST_FFA_ID,
+	}, res);
 }
 
-static void ffa_mem_xfer(struct arm_smccc_res *res, u64 func_id, u32 len,
+static void ffa_mem_xfer(struct arm_smccc_1_2_regs *res, u64 func_id, u32 len,
 			  u32 fraglen)
 {
-	arm_smccc_1_1_smc(func_id, len, fraglen,
-			  0, 0, 0, 0, 0,
-			  res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+		.a0 = func_id,
+		.a1 = len,
+		.a2 = fraglen,
+	}, res);
 }
 
-static void ffa_mem_reclaim(struct arm_smccc_res *res, u32 handle_lo,
+static void ffa_mem_reclaim(struct arm_smccc_1_2_regs *res, u32 handle_lo,
 			     u32 handle_hi, u32 flags)
 {
-	arm_smccc_1_1_smc(FFA_MEM_RECLAIM,
-			  handle_lo, handle_hi, flags,
-			  0, 0, 0, 0,
-			  res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+		.a0 = FFA_MEM_RECLAIM,
+		.a1 = handle_lo,
+		.a2 = handle_hi,
+		.a3 = flags,
+	}, res);
 }
 
-static void ffa_retrieve_req(struct arm_smccc_res *res, u32 len)
+static void ffa_retrieve_req(struct arm_smccc_1_2_regs *res, u32 len)
 {
-	arm_smccc_1_1_smc(FFA_FN64_MEM_RETRIEVE_REQ,
-			  len, len,
-			  0, 0, 0, 0, 0,
-			  res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+		.a0 = FFA_FN64_MEM_RETRIEVE_REQ,
+		.a1 = len,
+		.a2 = len,
+	}, res);
 }
 
-static void ffa_rx_release(struct arm_smccc_res *res)
+static void ffa_rx_release(struct arm_smccc_1_2_regs *res)
 {
-	arm_smccc_1_1_smc(FFA_RX_RELEASE,
-			  0, 0,
-			  0, 0, 0, 0, 0,
-			  res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+		.a0 = FFA_RX_RELEASE,
+	}, res);
 }
 
-static void do_ffa_rxtx_map(struct arm_smccc_res *res,
+static void do_ffa_rxtx_map(struct arm_smccc_1_2_regs *res,
 			    struct kvm_cpu_context *ctxt)
 {
 	DECLARE_REG(phys_addr_t, tx, ctxt, 1);
@@ -267,7 +309,7 @@ err_unmap:
 	goto out_unlock;
 }
 
-static void do_ffa_rxtx_unmap(struct arm_smccc_res *res,
+static void do_ffa_rxtx_unmap(struct arm_smccc_1_2_regs *res,
 			      struct kvm_cpu_context *ctxt)
 {
 	DECLARE_REG(u32, id, ctxt, 1);
@@ -368,7 +410,7 @@ static int ffa_host_unshare_ranges(struct ffa_mem_region_addr_range *ranges,
 	return ret;
 }
 
-static void do_ffa_mem_frag_tx(struct arm_smccc_res *res,
+static void do_ffa_mem_frag_tx(struct arm_smccc_1_2_regs *res,
 			       struct kvm_cpu_context *ctxt)
 {
 	DECLARE_REG(u32, handle_lo, ctxt, 1);
@@ -427,7 +469,7 @@ out:
 }
 
 static void __do_ffa_mem_xfer(const u64 func_id,
-			      struct arm_smccc_res *res,
+			      struct arm_smccc_1_2_regs *res,
 			      struct kvm_cpu_context *ctxt)
 {
 	DECLARE_REG(u32, len, ctxt, 1);
@@ -437,7 +479,7 @@ static void __do_ffa_mem_xfer(const u64 func_id,
 	struct ffa_mem_region_attributes *ep_mem_access;
 	struct ffa_composite_mem_region *reg;
 	struct ffa_mem_region *buf;
-	u32 offset, nr_ranges;
+	u32 offset, nr_ranges, checked_offset;
 	int ret = 0;
 
 	if (addr_mbz || npages_mbz || fraglen > len ||
@@ -474,7 +516,12 @@ static void __do_ffa_mem_xfer(const u64 func_id,
 		goto out_unlock;
 	}
 
-	if (fraglen < offset + sizeof(struct ffa_composite_mem_region)) {
+	if (check_add_overflow(offset, sizeof(struct ffa_composite_mem_region), &checked_offset)) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out_unlock;
+	}
+
+	if (fraglen < checked_offset) {
 		ret = FFA_RET_INVALID_PARAMETERS;
 		goto out_unlock;
 	}
@@ -521,7 +568,7 @@ err_unshare:
 		__do_ffa_mem_xfer((fid), (res), (ctxt));	\
 	} while (0);
 
-static void do_ffa_mem_reclaim(struct arm_smccc_res *res,
+static void do_ffa_mem_reclaim(struct arm_smccc_1_2_regs *res,
 			       struct kvm_cpu_context *ctxt)
 {
 	DECLARE_REG(u32, handle_lo, ctxt, 1);
@@ -628,13 +675,26 @@ static bool ffa_call_supported(u64 func_id)
 	case FFA_RXTX_MAP:
 	case FFA_MEM_DONATE:
 	case FFA_MEM_RETRIEVE_REQ:
+       /* Optional notification interfaces added in FF-A 1.1 */
+	case FFA_NOTIFICATION_BITMAP_CREATE:
+	case FFA_NOTIFICATION_BITMAP_DESTROY:
+	case FFA_NOTIFICATION_BIND:
+	case FFA_NOTIFICATION_UNBIND:
+	case FFA_NOTIFICATION_SET:
+	case FFA_NOTIFICATION_GET:
+	case FFA_NOTIFICATION_INFO_GET:
+	/* Optional interfaces added in FF-A 1.2 */
+	case FFA_MSG_SEND_DIRECT_REQ2:		/* Optional per 7.5.1 */
+	case FFA_MSG_SEND_DIRECT_RESP2:		/* Optional per 7.5.1 */
+	case FFA_CONSOLE_LOG:			/* Optional per 13.1: not in Table 13.1 */
+	case FFA_PARTITION_INFO_GET_REGS:	/* Optional for virtual instances per 13.1 */
 		return false;
 	}
 
 	return true;
 }
 
-static bool do_ffa_features(struct arm_smccc_res *res,
+static bool do_ffa_features(struct arm_smccc_1_2_regs *res,
 			    struct kvm_cpu_context *ctxt)
 {
 	DECLARE_REG(u32, id, ctxt, 1);
@@ -666,21 +726,25 @@ out_handled:
 static int hyp_ffa_post_init(void)
 {
 	size_t min_rxtx_sz;
-	struct arm_smccc_res res;
+	struct arm_smccc_1_2_regs res;
 
-	arm_smccc_1_1_smc(FFA_ID_GET, 0, 0, 0, 0, 0, 0, 0, &res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs){
+		.a0 = FFA_ID_GET,
+	}, &res);
 	if (res.a0 != FFA_SUCCESS)
 		return -EOPNOTSUPP;
 
 	if (res.a2 != HOST_FFA_ID)
 		return -EINVAL;
 
-	arm_smccc_1_1_smc(FFA_FEATURES, FFA_FN64_RXTX_MAP,
-			  0, 0, 0, 0, 0, 0, &res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs){
+		.a0 = FFA_FEATURES,
+		.a1 = FFA_FN64_RXTX_MAP,
+	}, &res);
 	if (res.a0 != FFA_SUCCESS)
 		return -EOPNOTSUPP;
 
-	switch (res.a2) {
+	switch (res.a2 & FFA_FEAT_RXTX_MIN_SZ_MASK) {
 	case FFA_FEAT_RXTX_MIN_SZ_4K:
 		min_rxtx_sz = SZ_4K;
 		break;
@@ -700,7 +764,7 @@ static int hyp_ffa_post_init(void)
 	return 0;
 }
 
-static void do_ffa_version(struct arm_smccc_res *res,
+static void do_ffa_version(struct arm_smccc_1_2_regs *res,
 			   struct kvm_cpu_context *ctxt)
 {
 	DECLARE_REG(u32, ffa_req_version, ctxt, 1);
@@ -712,7 +776,10 @@ static void do_ffa_version(struct arm_smccc_res *res,
 
 	hyp_spin_lock(&version_lock);
 	if (has_version_negotiated) {
-		res->a0 = hyp_ffa_version;
+		if (FFA_MINOR_VERSION(ffa_req_version) < FFA_MINOR_VERSION(hyp_ffa_version))
+			res->a0 = FFA_RET_NOT_SUPPORTED;
+		else
+			res->a0 = hyp_ffa_version;
 		goto unlock;
 	}
 
@@ -721,26 +788,27 @@ static void do_ffa_version(struct arm_smccc_res *res,
 	 * first if TEE supports it.
 	 */
 	if (FFA_MINOR_VERSION(ffa_req_version) < FFA_MINOR_VERSION(hyp_ffa_version)) {
-		arm_smccc_1_1_smc(FFA_VERSION, ffa_req_version, 0,
-				  0, 0, 0, 0, 0,
-				  res);
+		arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+			.a0 = FFA_VERSION,
+			.a1 = ffa_req_version,
+		}, res);
 		if (res->a0 == FFA_RET_NOT_SUPPORTED)
 			goto unlock;
 
 		hyp_ffa_version = ffa_req_version;
 	}
 
-	if (hyp_ffa_post_init())
+	if (hyp_ffa_post_init()) {
 		res->a0 = FFA_RET_NOT_SUPPORTED;
-	else {
-		has_version_negotiated = true;
+	} else {
+		smp_store_release(&has_version_negotiated, true);
 		res->a0 = hyp_ffa_version;
 	}
 unlock:
 	hyp_spin_unlock(&version_lock);
 }
 
-static void do_ffa_part_get(struct arm_smccc_res *res,
+static void do_ffa_part_get(struct arm_smccc_1_2_regs *res,
 			    struct kvm_cpu_context *ctxt)
 {
 	DECLARE_REG(u32, uuid0, ctxt, 1);
@@ -756,9 +824,14 @@ static void do_ffa_part_get(struct arm_smccc_res *res,
 		goto out_unlock;
 	}
 
-	arm_smccc_1_1_smc(FFA_PARTITION_INFO_GET, uuid0, uuid1,
-			  uuid2, uuid3, flags, 0, 0,
-			  res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+		.a0 = FFA_PARTITION_INFO_GET,
+		.a1 = uuid0,
+		.a2 = uuid1,
+		.a3 = uuid2,
+		.a4 = uuid3,
+		.a5 = flags,
+	}, res);
 
 	if (res->a0 != FFA_SUCCESS)
 		goto out_unlock;
@@ -791,7 +864,7 @@ out_unlock:
 
 bool kvm_host_ffa_handler(struct kvm_cpu_context *host_ctxt, u32 func_id)
 {
-	struct arm_smccc_res res;
+	struct arm_smccc_1_2_regs res;
 
 	/*
 	 * There's no way we can tell what a non-standard SMC call might
@@ -809,7 +882,8 @@ bool kvm_host_ffa_handler(struct kvm_cpu_context *host_ctxt, u32 func_id)
 	if (!is_ffa_call(func_id))
 		return false;
 
-	if (!has_version_negotiated && func_id != FFA_VERSION) {
+	if (func_id != FFA_VERSION &&
+	    !smp_load_acquire(&has_version_negotiated)) {
 		ffa_to_smccc_error(&res, FFA_RET_INVALID_PARAMETERS);
 		goto out_handled;
 	}
@@ -859,13 +933,16 @@ out_handled:
 
 int hyp_ffa_init(void *pages)
 {
-	struct arm_smccc_res res;
+	struct arm_smccc_1_2_regs res;
 	void *tx, *rx;
 
 	if (kvm_host_psci_config.smccc_version < ARM_SMCCC_VERSION_1_2)
 		return 0;
 
-	arm_smccc_1_1_smc(FFA_VERSION, FFA_VERSION_1_1, 0, 0, 0, 0, 0, 0, &res);
+	arm_smccc_1_2_smc(&(struct arm_smccc_1_2_regs) {
+		.a0 = FFA_VERSION,
+		.a1 = FFA_VERSION_1_2,
+	}, &res);
 	if (res.a0 == FFA_RET_NOT_SUPPORTED)
 		return 0;
 
@@ -885,10 +962,10 @@ int hyp_ffa_init(void *pages)
 	if (FFA_MAJOR_VERSION(res.a0) != 1)
 		return -EOPNOTSUPP;
 
-	if (FFA_MINOR_VERSION(res.a0) < FFA_MINOR_VERSION(FFA_VERSION_1_1))
+	if (FFA_MINOR_VERSION(res.a0) < FFA_MINOR_VERSION(FFA_VERSION_1_2))
 		hyp_ffa_version = res.a0;
 	else
-		hyp_ffa_version = FFA_VERSION_1_1;
+		hyp_ffa_version = FFA_VERSION_1_2;
 
 	tx = pages;
 	pages += KVM_FFA_MBOX_NR_PAGES * PAGE_SIZE;
diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S
index 3d610fc51f4d..eef15b374abb 100644
--- a/arch/arm64/kvm/hyp/nvhe/host.S
+++ b/arch/arm64/kvm/hyp/nvhe/host.S
@@ -124,7 +124,7 @@ SYM_FUNC_START(__hyp_do_panic)
 	/* Ensure host stage-2 is disabled */
 	mrs	x0, hcr_el2
 	bic	x0, x0, #HCR_VM
-	msr	hcr_el2, x0
+	msr_hcr_el2 x0
 	isb
 	tlbi	vmalls12e1
 	dsb	nsh
@@ -188,12 +188,12 @@ SYM_FUNC_END(__host_hvc)
 
 	/*
 	 * Test whether the SP has overflowed, without corrupting a GPR.
-	 * nVHE hypervisor stacks are aligned so that the PAGE_SHIFT bit
+	 * nVHE hypervisor stacks are aligned so that the NVHE_STACK_SHIFT bit
 	 * of SP should always be 1.
 	 */
 	add	sp, sp, x0			// sp' = sp + x0
 	sub	x0, sp, x0			// x0' = sp' - x0 = (sp + x0) - x0 = sp
-	tbz	x0, #PAGE_SHIFT, .L__hyp_sp_overflow\@
+	tbz	x0, #NVHE_STACK_SHIFT, .L__hyp_sp_overflow\@
 	sub	x0, sp, x0			// x0'' = sp' - x0' = (sp + x0) - sp = x0
 	sub	sp, sp, x0			// sp'' = sp' - x0 = (sp + x0) - x0 = sp
 
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
index fc1866226067..aada42522e7b 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-init.S
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
@@ -73,8 +73,12 @@ __do_hyp_init:
 	eret
 SYM_CODE_END(__kvm_hyp_init)
 
+/*
+ * Initialize EL2 CPU state to sane values.
+ *
+ * HCR_EL2.E2H must have been initialized already.
+ */
 SYM_CODE_START_LOCAL(__kvm_init_el2_state)
-	/* Initialize EL2 CPU state to sane values. */
 	init_el2_state				// Clobbers x0..x2
 	finalise_el2_state
 	ret
@@ -96,7 +100,7 @@ SYM_CODE_START_LOCAL(___kvm_hyp_init)
 	msr	mair_el2, x1
 
 	ldr	x1, [x0, #NVHE_INIT_HCR_EL2]
-	msr	hcr_el2, x1
+	msr_hcr_el2 x1
 
 	mov	x2, #HCR_E2H
 	and	x2, x1, x2
@@ -206,9 +210,9 @@ SYM_CODE_START_LOCAL(__kvm_hyp_init_cpu)
 
 2:	msr	SPsel, #1			// We want to use SP_EL{1,2}
 
-	bl	__kvm_init_el2_state
+	init_el2_hcr	0
 
-	__init_el2_nvhe_prepare_eret
+	bl	__kvm_init_el2_state
 
 	/* Enable MMU, set vectors and stack. */
 	mov	x0, x28
@@ -258,7 +262,7 @@ reset:
 
 alternative_if ARM64_KVM_PROTECTED_MODE
 	mov_q	x5, HCR_HOST_NVHE_FLAGS
-	msr	hcr_el2, x5
+	msr_hcr_el2 x5
 alternative_else_nop_endif
 
 	/* Install stub vectors */
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
index 6aa0b13d86e5..a7c689152f68 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
@@ -5,6 +5,7 @@
  */
 
 #include <hyp/adjust_pc.h>
+#include <hyp/switch.h>
 
 #include <asm/pgtable-types.h>
 #include <asm/kvm_asm.h>
@@ -25,7 +26,7 @@ void __kvm_hyp_host_forward_smc(struct kvm_cpu_context *host_ctxt);
 
 static void __hyp_sve_save_guest(struct kvm_vcpu *vcpu)
 {
-	__vcpu_sys_reg(vcpu, ZCR_EL1) = read_sysreg_el1(SYS_ZCR);
+	__vcpu_assign_sys_reg(vcpu, ZCR_EL1, read_sysreg_el1(SYS_ZCR));
 	/*
 	 * On saving/restoring guest sve state, always use the maximum VL for
 	 * the guest. The layout of the data when saving the sve state depends
@@ -68,7 +69,10 @@ static void fpsimd_sve_sync(struct kvm_vcpu *vcpu)
 	if (!guest_owns_fp_regs())
 		return;
 
-	cpacr_clear_set(0, CPACR_ELx_FPEN | CPACR_ELx_ZEN);
+	/*
+	 * Traps have been disabled by __deactivate_cptr_traps(), but there
+	 * hasn't necessarily been a context synchronization event yet.
+	 */
 	isb();
 
 	if (vcpu_has_sve(vcpu))
@@ -78,12 +82,12 @@ static void fpsimd_sve_sync(struct kvm_vcpu *vcpu)
 
 	has_fpmr = kvm_has_fpmr(kern_hyp_va(vcpu->kvm));
 	if (has_fpmr)
-		__vcpu_sys_reg(vcpu, FPMR) = read_sysreg_s(SYS_FPMR);
+		__vcpu_assign_sys_reg(vcpu, FPMR, read_sysreg_s(SYS_FPMR));
 
 	if (system_supports_sve())
 		__hyp_sve_restore_host();
 	else
-		__fpsimd_restore_state(*host_data_ptr(fpsimd_state));
+		__fpsimd_restore_state(host_data_ptr(host_ctxt.fp_regs));
 
 	if (has_fpmr)
 		write_sysreg_s(*host_data_ptr(fpmr), SYS_FPMR);
@@ -91,20 +95,37 @@ static void fpsimd_sve_sync(struct kvm_vcpu *vcpu)
 	*host_data_ptr(fp_owner) = FP_STATE_HOST_OWNED;
 }
 
+static void flush_debug_state(struct pkvm_hyp_vcpu *hyp_vcpu)
+{
+	struct kvm_vcpu *host_vcpu = hyp_vcpu->host_vcpu;
+
+	hyp_vcpu->vcpu.arch.debug_owner = host_vcpu->arch.debug_owner;
+
+	if (kvm_guest_owns_debug_regs(&hyp_vcpu->vcpu))
+		hyp_vcpu->vcpu.arch.vcpu_debug_state = host_vcpu->arch.vcpu_debug_state;
+	else if (kvm_host_owns_debug_regs(&hyp_vcpu->vcpu))
+		hyp_vcpu->vcpu.arch.external_debug_state = host_vcpu->arch.external_debug_state;
+}
+
+static void sync_debug_state(struct pkvm_hyp_vcpu *hyp_vcpu)
+{
+	struct kvm_vcpu *host_vcpu = hyp_vcpu->host_vcpu;
+
+	if (kvm_guest_owns_debug_regs(&hyp_vcpu->vcpu))
+		host_vcpu->arch.vcpu_debug_state = hyp_vcpu->vcpu.arch.vcpu_debug_state;
+	else if (kvm_host_owns_debug_regs(&hyp_vcpu->vcpu))
+		host_vcpu->arch.external_debug_state = hyp_vcpu->vcpu.arch.external_debug_state;
+}
+
 static void flush_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu)
 {
 	struct kvm_vcpu *host_vcpu = hyp_vcpu->host_vcpu;
 
 	fpsimd_sve_flush();
+	flush_debug_state(hyp_vcpu);
 
 	hyp_vcpu->vcpu.arch.ctxt	= host_vcpu->arch.ctxt;
 
-	hyp_vcpu->vcpu.arch.sve_state	= kern_hyp_va(host_vcpu->arch.sve_state);
-	/* Limit guest vector length to the maximum supported by the host.  */
-	hyp_vcpu->vcpu.arch.sve_max_vl	= min(host_vcpu->arch.sve_max_vl, kvm_host_sve_max_vl);
-
-	hyp_vcpu->vcpu.arch.hw_mmu	= host_vcpu->arch.hw_mmu;
-
 	hyp_vcpu->vcpu.arch.mdcr_el2	= host_vcpu->arch.mdcr_el2;
 	hyp_vcpu->vcpu.arch.hcr_el2 &= ~(HCR_TWI | HCR_TWE);
 	hyp_vcpu->vcpu.arch.hcr_el2 |= READ_ONCE(host_vcpu->arch.hcr_el2) &
@@ -112,8 +133,6 @@ static void flush_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu)
 
 	hyp_vcpu->vcpu.arch.iflags	= host_vcpu->arch.iflags;
 
-	hyp_vcpu->vcpu.arch.debug_ptr	= kern_hyp_va(host_vcpu->arch.debug_ptr);
-
 	hyp_vcpu->vcpu.arch.vsesr_el2	= host_vcpu->arch.vsesr_el2;
 
 	hyp_vcpu->vcpu.arch.vgic_cpu.vgic_v3 = host_vcpu->arch.vgic_cpu.vgic_v3;
@@ -127,6 +146,7 @@ static void sync_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu)
 	unsigned int i;
 
 	fpsimd_sve_sync(&hyp_vcpu->vcpu);
+	sync_debug_state(hyp_vcpu);
 
 	host_vcpu->arch.ctxt		= hyp_vcpu->vcpu.arch.ctxt;
 
@@ -137,20 +157,51 @@ static void sync_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu)
 	host_vcpu->arch.iflags		= hyp_vcpu->vcpu.arch.iflags;
 
 	host_cpu_if->vgic_hcr		= hyp_cpu_if->vgic_hcr;
+	host_cpu_if->vgic_vmcr		= hyp_cpu_if->vgic_vmcr;
 	for (i = 0; i < hyp_cpu_if->used_lrs; ++i)
 		host_cpu_if->vgic_lr[i] = hyp_cpu_if->vgic_lr[i];
 }
 
+static void handle___pkvm_vcpu_load(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
+	DECLARE_REG(unsigned int, vcpu_idx, host_ctxt, 2);
+	DECLARE_REG(u64, hcr_el2, host_ctxt, 3);
+	struct pkvm_hyp_vcpu *hyp_vcpu;
+
+	if (!is_protected_kvm_enabled())
+		return;
+
+	hyp_vcpu = pkvm_load_hyp_vcpu(handle, vcpu_idx);
+	if (!hyp_vcpu)
+		return;
+
+	if (pkvm_hyp_vcpu_is_protected(hyp_vcpu)) {
+		/* Propagate WFx trapping flags */
+		hyp_vcpu->vcpu.arch.hcr_el2 &= ~(HCR_TWE | HCR_TWI);
+		hyp_vcpu->vcpu.arch.hcr_el2 |= hcr_el2 & (HCR_TWE | HCR_TWI);
+	}
+}
+
+static void handle___pkvm_vcpu_put(struct kvm_cpu_context *host_ctxt)
+{
+	struct pkvm_hyp_vcpu *hyp_vcpu;
+
+	if (!is_protected_kvm_enabled())
+		return;
+
+	hyp_vcpu = pkvm_get_loaded_hyp_vcpu();
+	if (hyp_vcpu)
+		pkvm_put_hyp_vcpu(hyp_vcpu);
+}
+
 static void handle___kvm_vcpu_run(struct kvm_cpu_context *host_ctxt)
 {
 	DECLARE_REG(struct kvm_vcpu *, host_vcpu, host_ctxt, 1);
 	int ret;
 
-	host_vcpu = kern_hyp_va(host_vcpu);
-
 	if (unlikely(is_protected_kvm_enabled())) {
-		struct pkvm_hyp_vcpu *hyp_vcpu;
-		struct kvm *host_kvm;
+		struct pkvm_hyp_vcpu *hyp_vcpu = pkvm_get_loaded_hyp_vcpu();
 
 		/*
 		 * KVM (and pKVM) doesn't support SME guests for now, and
@@ -163,9 +214,6 @@ static void handle___kvm_vcpu_run(struct kvm_cpu_context *host_ctxt)
 			goto out;
 		}
 
-		host_kvm = kern_hyp_va(host_vcpu->kvm);
-		hyp_vcpu = pkvm_load_hyp_vcpu(host_kvm->arch.pkvm.handle,
-					      host_vcpu->vcpu_idx);
 		if (!hyp_vcpu) {
 			ret = -EINVAL;
 			goto out;
@@ -176,12 +224,149 @@ static void handle___kvm_vcpu_run(struct kvm_cpu_context *host_ctxt)
 		ret = __kvm_vcpu_run(&hyp_vcpu->vcpu);
 
 		sync_hyp_vcpu(hyp_vcpu);
-		pkvm_put_hyp_vcpu(hyp_vcpu);
 	} else {
+		struct kvm_vcpu *vcpu = kern_hyp_va(host_vcpu);
+
 		/* The host is fully trusted, run its vCPU directly. */
-		ret = __kvm_vcpu_run(host_vcpu);
+		fpsimd_lazy_switch_to_guest(vcpu);
+		ret = __kvm_vcpu_run(vcpu);
+		fpsimd_lazy_switch_to_host(vcpu);
 	}
+out:
+	cpu_reg(host_ctxt, 1) =  ret;
+}
+
+static int pkvm_refill_memcache(struct pkvm_hyp_vcpu *hyp_vcpu)
+{
+	struct kvm_vcpu *host_vcpu = hyp_vcpu->host_vcpu;
+
+	return refill_memcache(&hyp_vcpu->vcpu.arch.pkvm_memcache,
+			       host_vcpu->arch.pkvm_memcache.nr_pages,
+			       &host_vcpu->arch.pkvm_memcache);
+}
+
+static void handle___pkvm_host_share_guest(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(u64, pfn, host_ctxt, 1);
+	DECLARE_REG(u64, gfn, host_ctxt, 2);
+	DECLARE_REG(u64, nr_pages, host_ctxt, 3);
+	DECLARE_REG(enum kvm_pgtable_prot, prot, host_ctxt, 4);
+	struct pkvm_hyp_vcpu *hyp_vcpu;
+	int ret = -EINVAL;
+
+	if (!is_protected_kvm_enabled())
+		goto out;
+
+	hyp_vcpu = pkvm_get_loaded_hyp_vcpu();
+	if (!hyp_vcpu || pkvm_hyp_vcpu_is_protected(hyp_vcpu))
+		goto out;
+
+	ret = pkvm_refill_memcache(hyp_vcpu);
+	if (ret)
+		goto out;
+
+	ret = __pkvm_host_share_guest(pfn, gfn, nr_pages, hyp_vcpu, prot);
+out:
+	cpu_reg(host_ctxt, 1) =  ret;
+}
+
+static void handle___pkvm_host_unshare_guest(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
+	DECLARE_REG(u64, gfn, host_ctxt, 2);
+	DECLARE_REG(u64, nr_pages, host_ctxt, 3);
+	struct pkvm_hyp_vm *hyp_vm;
+	int ret = -EINVAL;
+
+	if (!is_protected_kvm_enabled())
+		goto out;
+
+	hyp_vm = get_np_pkvm_hyp_vm(handle);
+	if (!hyp_vm)
+		goto out;
+
+	ret = __pkvm_host_unshare_guest(gfn, nr_pages, hyp_vm);
+	put_pkvm_hyp_vm(hyp_vm);
+out:
+	cpu_reg(host_ctxt, 1) =  ret;
+}
+
+static void handle___pkvm_host_relax_perms_guest(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(u64, gfn, host_ctxt, 1);
+	DECLARE_REG(enum kvm_pgtable_prot, prot, host_ctxt, 2);
+	struct pkvm_hyp_vcpu *hyp_vcpu;
+	int ret = -EINVAL;
+
+	if (!is_protected_kvm_enabled())
+		goto out;
+
+	hyp_vcpu = pkvm_get_loaded_hyp_vcpu();
+	if (!hyp_vcpu || pkvm_hyp_vcpu_is_protected(hyp_vcpu))
+		goto out;
+
+	ret = __pkvm_host_relax_perms_guest(gfn, hyp_vcpu, prot);
+out:
+	cpu_reg(host_ctxt, 1) = ret;
+}
+
+static void handle___pkvm_host_wrprotect_guest(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
+	DECLARE_REG(u64, gfn, host_ctxt, 2);
+	DECLARE_REG(u64, nr_pages, host_ctxt, 3);
+	struct pkvm_hyp_vm *hyp_vm;
+	int ret = -EINVAL;
+
+	if (!is_protected_kvm_enabled())
+		goto out;
+
+	hyp_vm = get_np_pkvm_hyp_vm(handle);
+	if (!hyp_vm)
+		goto out;
+
+	ret = __pkvm_host_wrprotect_guest(gfn, nr_pages, hyp_vm);
+	put_pkvm_hyp_vm(hyp_vm);
+out:
+	cpu_reg(host_ctxt, 1) = ret;
+}
+
+static void handle___pkvm_host_test_clear_young_guest(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
+	DECLARE_REG(u64, gfn, host_ctxt, 2);
+	DECLARE_REG(u64, nr_pages, host_ctxt, 3);
+	DECLARE_REG(bool, mkold, host_ctxt, 4);
+	struct pkvm_hyp_vm *hyp_vm;
+	int ret = -EINVAL;
+
+	if (!is_protected_kvm_enabled())
+		goto out;
+
+	hyp_vm = get_np_pkvm_hyp_vm(handle);
+	if (!hyp_vm)
+		goto out;
 
+	ret = __pkvm_host_test_clear_young_guest(gfn, nr_pages, mkold, hyp_vm);
+	put_pkvm_hyp_vm(hyp_vm);
+out:
+	cpu_reg(host_ctxt, 1) = ret;
+}
+
+static void handle___pkvm_host_mkyoung_guest(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(u64, gfn, host_ctxt, 1);
+	struct pkvm_hyp_vcpu *hyp_vcpu;
+	int ret = -EINVAL;
+
+	if (!is_protected_kvm_enabled())
+		goto out;
+
+	hyp_vcpu = pkvm_get_loaded_hyp_vcpu();
+	if (!hyp_vcpu || pkvm_hyp_vcpu_is_protected(hyp_vcpu))
+		goto out;
+
+	ret = __pkvm_host_mkyoung_guest(gfn, hyp_vcpu);
 out:
 	cpu_reg(host_ctxt, 1) =  ret;
 }
@@ -233,6 +418,22 @@ static void handle___kvm_tlb_flush_vmid(struct kvm_cpu_context *host_ctxt)
 	__kvm_tlb_flush_vmid(kern_hyp_va(mmu));
 }
 
+static void handle___pkvm_tlb_flush_vmid(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
+	struct pkvm_hyp_vm *hyp_vm;
+
+	if (!is_protected_kvm_enabled())
+		return;
+
+	hyp_vm = get_np_pkvm_hyp_vm(handle);
+	if (!hyp_vm)
+		return;
+
+	__kvm_tlb_flush_vmid(&hyp_vm->kvm.arch.mmu);
+	put_pkvm_hyp_vm(hyp_vm);
+}
+
 static void handle___kvm_flush_cpu_context(struct kvm_cpu_context *host_ctxt)
 {
 	DECLARE_REG(struct kvm_s2_mmu *, mmu, host_ctxt, 1);
@@ -264,16 +465,11 @@ static void handle___vgic_v3_init_lrs(struct kvm_cpu_context *host_ctxt)
 	__vgic_v3_init_lrs();
 }
 
-static void handle___kvm_get_mdcr_el2(struct kvm_cpu_context *host_ctxt)
-{
-	cpu_reg(host_ctxt, 1) = __kvm_get_mdcr_el2();
-}
-
-static void handle___vgic_v3_save_vmcr_aprs(struct kvm_cpu_context *host_ctxt)
+static void handle___vgic_v3_save_aprs(struct kvm_cpu_context *host_ctxt)
 {
 	DECLARE_REG(struct vgic_v3_cpu_if *, cpu_if, host_ctxt, 1);
 
-	__vgic_v3_save_vmcr_aprs(kern_hyp_va(cpu_if));
+	__vgic_v3_save_aprs(kern_hyp_va(cpu_if));
 }
 
 static void handle___vgic_v3_restore_vmcr_aprs(struct kvm_cpu_context *host_ctxt)
@@ -351,6 +547,18 @@ static void handle___pkvm_prot_finalize(struct kvm_cpu_context *host_ctxt)
 	cpu_reg(host_ctxt, 1) = __pkvm_prot_finalize();
 }
 
+static void handle___pkvm_reserve_vm(struct kvm_cpu_context *host_ctxt)
+{
+	cpu_reg(host_ctxt, 1) = __pkvm_reserve_vm();
+}
+
+static void handle___pkvm_unreserve_vm(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
+
+	__pkvm_unreserve_vm(handle);
+}
+
 static void handle___pkvm_init_vm(struct kvm_cpu_context *host_ctxt)
 {
 	DECLARE_REG(struct kvm *, host_kvm, host_ctxt, 1);
@@ -384,7 +592,6 @@ typedef void (*hcall_t)(struct kvm_cpu_context *);
 
 static const hcall_t host_hcall[] = {
 	/* ___kvm_hyp_init */
-	HANDLE_FUNC(__kvm_get_mdcr_el2),
 	HANDLE_FUNC(__pkvm_init),
 	HANDLE_FUNC(__pkvm_create_private_mapping),
 	HANDLE_FUNC(__pkvm_cpu_set_vector),
@@ -395,6 +602,12 @@ static const hcall_t host_hcall[] = {
 
 	HANDLE_FUNC(__pkvm_host_share_hyp),
 	HANDLE_FUNC(__pkvm_host_unshare_hyp),
+	HANDLE_FUNC(__pkvm_host_share_guest),
+	HANDLE_FUNC(__pkvm_host_unshare_guest),
+	HANDLE_FUNC(__pkvm_host_relax_perms_guest),
+	HANDLE_FUNC(__pkvm_host_wrprotect_guest),
+	HANDLE_FUNC(__pkvm_host_test_clear_young_guest),
+	HANDLE_FUNC(__pkvm_host_mkyoung_guest),
 	HANDLE_FUNC(__kvm_adjust_pc),
 	HANDLE_FUNC(__kvm_vcpu_run),
 	HANDLE_FUNC(__kvm_flush_vm_context),
@@ -404,11 +617,16 @@ static const hcall_t host_hcall[] = {
 	HANDLE_FUNC(__kvm_tlb_flush_vmid_range),
 	HANDLE_FUNC(__kvm_flush_cpu_context),
 	HANDLE_FUNC(__kvm_timer_set_cntvoff),
-	HANDLE_FUNC(__vgic_v3_save_vmcr_aprs),
+	HANDLE_FUNC(__vgic_v3_save_aprs),
 	HANDLE_FUNC(__vgic_v3_restore_vmcr_aprs),
+	HANDLE_FUNC(__pkvm_reserve_vm),
+	HANDLE_FUNC(__pkvm_unreserve_vm),
 	HANDLE_FUNC(__pkvm_init_vm),
 	HANDLE_FUNC(__pkvm_init_vcpu),
 	HANDLE_FUNC(__pkvm_teardown_vm),
+	HANDLE_FUNC(__pkvm_vcpu_load),
+	HANDLE_FUNC(__pkvm_vcpu_put),
+	HANDLE_FUNC(__pkvm_tlb_flush_vmid),
 };
 
 static void handle_host_hcall(struct kvm_cpu_context *host_ctxt)
@@ -480,12 +698,6 @@ void handle_trap(struct kvm_cpu_context *host_ctxt)
 	case ESR_ELx_EC_SMC64:
 		handle_host_smc(host_ctxt);
 		break;
-	case ESR_ELx_EC_SVE:
-		cpacr_clear_set(0, CPACR_ELx_ZEN);
-		isb();
-		sve_cond_update_zcr_vq(sve_vq_from_vl(kvm_host_sve_max_vl) - 1,
-				       SYS_ZCR_EL2);
-		break;
 	case ESR_ELx_EC_IABT_LOW:
 	case ESR_ELx_EC_DABT_LOW:
 		handle_host_mem_abort(host_ctxt);
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp.lds.S b/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
index f4562f417d3f..d724f6d69302 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
+++ b/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
@@ -25,5 +25,7 @@ SECTIONS {
 	BEGIN_HYP_SECTION(.data..percpu)
 		PERCPU_INPUT(L1_CACHE_BYTES)
 	END_HYP_SECTION
+
 	HYP_SECTION(.bss)
+	HYP_SECTION(.data)
 }
diff --git a/arch/arm64/kvm/hyp/nvhe/list_debug.c b/arch/arm64/kvm/hyp/nvhe/list_debug.c
index 46a2d4f2b3c6..baa6260f88dc 100644
--- a/arch/arm64/kvm/hyp/nvhe/list_debug.c
+++ b/arch/arm64/kvm/hyp/nvhe/list_debug.c
@@ -17,7 +17,7 @@ static inline __must_check bool nvhe_check_data_corruption(bool v)
 		bool corruption = unlikely(condition);			 \
 		if (corruption) {					 \
 			if (IS_ENABLED(CONFIG_BUG_ON_DATA_CORRUPTION)) { \
-				BUG_ON(1);				 \
+				BUG();				 	 \
 			} else						 \
 				WARN_ON(1);				 \
 		}							 \
diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
index caba3e4bd09e..49db32f3ddf7 100644
--- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c
+++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
@@ -60,6 +60,11 @@ static void hyp_unlock_component(void)
 	hyp_spin_unlock(&pkvm_pgd_lock);
 }
 
+#define for_each_hyp_page(__p, __st, __sz)				\
+	for (struct hyp_page *__p = hyp_phys_to_page(__st),		\
+			     *__e = __p + ((__sz) >> PAGE_SHIFT);	\
+	     __p < __e; __p++)
+
 static void *host_s2_zalloc_pages_exact(size_t size)
 {
 	void *addr = hyp_alloc_pages(&host_s2_pool, get_order(size));
@@ -161,12 +166,6 @@ int kvm_host_prepare_stage2(void *pgt_pool_base)
 	return 0;
 }
 
-static bool guest_stage2_force_pte_cb(u64 addr, u64 end,
-				      enum kvm_pgtable_prot prot)
-{
-	return true;
-}
-
 static void *guest_s2_zalloc_pages_exact(size_t size)
 {
 	void *addr = hyp_alloc_pages(&current_vm->pool, get_order(size));
@@ -201,8 +200,8 @@ static void *guest_s2_zalloc_page(void *mc)
 
 	memset(addr, 0, PAGE_SIZE);
 	p = hyp_virt_to_page(addr);
-	memset(p, 0, sizeof(*p));
 	p->refcount = 1;
+	p->order = 0;
 
 	return addr;
 }
@@ -217,16 +216,42 @@ static void guest_s2_put_page(void *addr)
 	hyp_put_page(&current_vm->pool, addr);
 }
 
+static void __apply_guest_page(void *va, size_t size,
+			       void (*func)(void *addr, size_t size))
+{
+	size += va - PTR_ALIGN_DOWN(va, PAGE_SIZE);
+	va = PTR_ALIGN_DOWN(va, PAGE_SIZE);
+	size = PAGE_ALIGN(size);
+
+	while (size) {
+		size_t map_size = PAGE_SIZE;
+		void *map;
+
+		if (IS_ALIGNED((unsigned long)va, PMD_SIZE) && size >= PMD_SIZE)
+			map = hyp_fixblock_map(__hyp_pa(va), &map_size);
+		else
+			map = hyp_fixmap_map(__hyp_pa(va));
+
+		func(map, map_size);
+
+		if (map_size == PMD_SIZE)
+			hyp_fixblock_unmap();
+		else
+			hyp_fixmap_unmap();
+
+		size -= map_size;
+		va += map_size;
+	}
+}
+
 static void clean_dcache_guest_page(void *va, size_t size)
 {
-	__clean_dcache_guest_page(hyp_fixmap_map(__hyp_pa(va)), size);
-	hyp_fixmap_unmap();
+	__apply_guest_page(va, size, __clean_dcache_guest_page);
 }
 
 static void invalidate_icache_guest_page(void *va, size_t size)
 {
-	__invalidate_icache_guest_page(hyp_fixmap_map(__hyp_pa(va)), size);
-	hyp_fixmap_unmap();
+	__apply_guest_page(va, size, __invalidate_icache_guest_page);
 }
 
 int kvm_guest_prepare_stage2(struct pkvm_hyp_vm *vm, void *pgd)
@@ -255,8 +280,7 @@ int kvm_guest_prepare_stage2(struct pkvm_hyp_vm *vm, void *pgd)
 	};
 
 	guest_lock_component(vm);
-	ret = __kvm_pgtable_stage2_init(mmu->pgt, mmu, &vm->mm_ops, 0,
-					guest_stage2_force_pte_cb);
+	ret = __kvm_pgtable_stage2_init(mmu->pgt, mmu, &vm->mm_ops, 0, NULL);
 	guest_unlock_component(vm);
 	if (ret)
 		return ret;
@@ -266,8 +290,9 @@ int kvm_guest_prepare_stage2(struct pkvm_hyp_vm *vm, void *pgd)
 	return 0;
 }
 
-void reclaim_guest_pages(struct pkvm_hyp_vm *vm, struct kvm_hyp_memcache *mc)
+void reclaim_pgtable_pages(struct pkvm_hyp_vm *vm, struct kvm_hyp_memcache *mc)
 {
+	struct hyp_page *page;
 	void *addr;
 
 	/* Dump all pgtable pages in the hyp_pool */
@@ -279,7 +304,9 @@ void reclaim_guest_pages(struct pkvm_hyp_vm *vm, struct kvm_hyp_memcache *mc)
 	/* Drain the hyp_pool into the memcache */
 	addr = hyp_alloc_pages(&vm->pool, 0);
 	while (addr) {
-		memset(hyp_virt_to_page(addr), 0, sizeof(struct hyp_page));
+		page = hyp_virt_to_page(addr);
+		page->refcount = 0;
+		page->order = 0;
 		push_hyp_memcache(mc, addr, hyp_virt_to_phys);
 		WARN_ON(__pkvm_hyp_donate_host(hyp_virt_to_pfn(addr), 1));
 		addr = hyp_alloc_pages(&vm->pool, 0);
@@ -306,7 +333,7 @@ int __pkvm_prot_finalize(void)
 	 */
 	kvm_flush_dcache_to_poc(params, sizeof(*params));
 
-	write_sysreg(params->hcr_el2, hcr_el2);
+	write_sysreg_hcr(params->hcr_el2);
 	__load_stage2(&host_mmu.arch.mmu, &host_mmu.arch);
 
 	/*
@@ -340,6 +367,19 @@ static int host_stage2_unmap_dev_all(void)
 	return kvm_pgtable_stage2_unmap(pgt, addr, BIT(pgt->ia_bits) - addr);
 }
 
+/*
+ * Ensure the PFN range is contained within PA-range.
+ *
+ * This check is also robust to overflows and is therefore a requirement before
+ * using a pfn/nr_pages pair from an untrusted source.
+ */
+static bool pfn_range_is_valid(u64 pfn, u64 nr_pages)
+{
+	u64 limit = BIT(kvm_phys_shift(&host_mmu.arch.mmu) - PAGE_SHIFT);
+
+	return pfn < limit && ((limit - pfn) >= nr_pages);
+}
+
 struct kvm_mem_range {
 	u64 start;
 	u64 end;
@@ -382,19 +422,28 @@ bool addr_is_memory(phys_addr_t phys)
 	return !!find_mem_range(phys, &range);
 }
 
-static bool addr_is_allowed_memory(phys_addr_t phys)
+static bool is_in_mem_range(u64 addr, struct kvm_mem_range *range)
+{
+	return range->start <= addr && addr < range->end;
+}
+
+static int check_range_allowed_memory(u64 start, u64 end)
 {
 	struct memblock_region *reg;
 	struct kvm_mem_range range;
 
-	reg = find_mem_range(phys, &range);
+	/*
+	 * Callers can't check the state of a range that overlaps memory and
+	 * MMIO regions, so ensure [start, end[ is in the same kvm_mem_range.
+	 */
+	reg = find_mem_range(start, &range);
+	if (!is_in_mem_range(end - 1, &range))
+		return -EINVAL;
 
-	return reg && !(reg->flags & MEMBLOCK_NOMAP);
-}
+	if (!reg || reg->flags & MEMBLOCK_NOMAP)
+		return -EPERM;
 
-static bool is_in_mem_range(u64 addr, struct kvm_mem_range *range)
-{
-	return range->start <= addr && addr < range->end;
+	return 0;
 }
 
 static bool range_is_memory(u64 start, u64 end)
@@ -443,6 +492,7 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
 {
 	struct kvm_mem_range cur;
 	kvm_pte_t pte;
+	u64 granule;
 	s8 level;
 	int ret;
 
@@ -454,21 +504,27 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
 	if (kvm_pte_valid(pte))
 		return -EAGAIN;
 
-	if (pte)
+	if (pte) {
+		WARN_ON(addr_is_memory(addr) &&
+			get_host_state(hyp_phys_to_page(addr)) != PKVM_NOPAGE);
 		return -EPERM;
+	}
 
-	do {
-		u64 granule = kvm_granule_size(level);
+	for (; level <= KVM_PGTABLE_LAST_LEVEL; level++) {
+		if (!kvm_level_supports_block_mapping(level))
+			continue;
+		granule = kvm_granule_size(level);
 		cur.start = ALIGN_DOWN(addr, granule);
 		cur.end = cur.start + granule;
-		level++;
-	} while ((level <= KVM_PGTABLE_LAST_LEVEL) &&
-			!(kvm_level_supports_block_mapping(level) &&
-			  range_included(&cur, range)));
+		if (!range_included(&cur, range))
+			continue;
+		*range = cur;
+		return 0;
+	}
 
-	*range = cur;
+	WARN_ON(1);
 
-	return 0;
+	return -EINVAL;
 }
 
 int host_stage2_idmap_locked(phys_addr_t addr, u64 size,
@@ -477,10 +533,31 @@ int host_stage2_idmap_locked(phys_addr_t addr, u64 size,
 	return host_stage2_try(__host_stage2_idmap, addr, addr + size, prot);
 }
 
+static void __host_update_page_state(phys_addr_t addr, u64 size, enum pkvm_page_state state)
+{
+	for_each_hyp_page(page, addr, size)
+		set_host_state(page, state);
+}
+
 int host_stage2_set_owner_locked(phys_addr_t addr, u64 size, u8 owner_id)
 {
-	return host_stage2_try(kvm_pgtable_stage2_set_owner, &host_mmu.pgt,
-			       addr, size, &host_s2_pool, owner_id);
+	int ret;
+
+	if (!range_is_memory(addr, addr + size))
+		return -EPERM;
+
+	ret = host_stage2_try(kvm_pgtable_stage2_set_owner, &host_mmu.pgt,
+			      addr, size, &host_s2_pool, owner_id);
+	if (ret)
+		return ret;
+
+	/* Don't forget to update the vmemmap tracking for the host */
+	if (owner_id == PKVM_ID_HOST)
+		__host_update_page_state(addr, size, PKVM_PAGE_OWNED);
+	else
+		__host_update_page_state(addr, size, PKVM_NOPAGE);
+
+	return 0;
 }
 
 static bool host_stage2_force_pte_cb(u64 addr, u64 end, enum kvm_pgtable_prot prot)
@@ -541,44 +618,18 @@ void handle_host_mem_abort(struct kvm_cpu_context *host_ctxt)
 		return;
 	}
 
-	addr = (fault.hpfar_el2 & HPFAR_MASK) << 8;
+
+	/*
+	 * Yikes, we couldn't resolve the fault IPA. This should reinject an
+	 * abort into the host when we figure out how to do that.
+	 */
+	BUG_ON(!(fault.hpfar_el2 & HPFAR_EL2_NS));
+	addr = FIELD_GET(HPFAR_EL2_FIPA, fault.hpfar_el2) << 12;
+
 	ret = host_stage2_idmap(addr);
 	BUG_ON(ret && ret != -EAGAIN);
 }
 
-struct pkvm_mem_transition {
-	u64				nr_pages;
-
-	struct {
-		enum pkvm_component_id	id;
-		/* Address in the initiator's address space */
-		u64			addr;
-
-		union {
-			struct {
-				/* Address in the completer's address space */
-				u64	completer_addr;
-			} host;
-			struct {
-				u64	completer_addr;
-			} hyp;
-		};
-	} initiator;
-
-	struct {
-		enum pkvm_component_id	id;
-	} completer;
-};
-
-struct pkvm_mem_share {
-	const struct pkvm_mem_transition	tx;
-	const enum kvm_pgtable_prot		completer_prot;
-};
-
-struct pkvm_mem_donation {
-	const struct pkvm_mem_transition	tx;
-};
-
 struct check_walk_data {
 	enum pkvm_page_state	desired;
 	enum pkvm_page_state	(*get_page_state)(kvm_pte_t pte, u64 addr);
@@ -604,708 +655,742 @@ static int check_page_state_range(struct kvm_pgtable *pgt, u64 addr, u64 size,
 	return kvm_pgtable_walk(pgt, addr, size, &walker);
 }
 
-static enum pkvm_page_state host_get_page_state(kvm_pte_t pte, u64 addr)
-{
-	if (!addr_is_allowed_memory(addr))
-		return PKVM_NOPAGE;
-
-	if (!kvm_pte_valid(pte) && pte)
-		return PKVM_NOPAGE;
-
-	return pkvm_getstate(kvm_pgtable_stage2_pte_prot(pte));
-}
-
 static int __host_check_page_state_range(u64 addr, u64 size,
 					 enum pkvm_page_state state)
 {
-	struct check_walk_data d = {
-		.desired	= state,
-		.get_page_state	= host_get_page_state,
-	};
+	int ret;
+
+	ret = check_range_allowed_memory(addr, addr + size);
+	if (ret)
+		return ret;
 
 	hyp_assert_lock_held(&host_mmu.lock);
-	return check_page_state_range(&host_mmu.pgt, addr, size, &d);
+
+	for_each_hyp_page(page, addr, size) {
+		if (get_host_state(page) != state)
+			return -EPERM;
+	}
+
+	return 0;
 }
 
 static int __host_set_page_state_range(u64 addr, u64 size,
 				       enum pkvm_page_state state)
 {
-	enum kvm_pgtable_prot prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, state);
+	if (get_host_state(hyp_phys_to_page(addr)) == PKVM_NOPAGE) {
+		int ret = host_stage2_idmap_locked(addr, size, PKVM_HOST_MEM_PROT);
 
-	return host_stage2_idmap_locked(addr, size, prot);
-}
+		if (ret)
+			return ret;
+	}
 
-static int host_request_owned_transition(u64 *completer_addr,
-					 const struct pkvm_mem_transition *tx)
-{
-	u64 size = tx->nr_pages * PAGE_SIZE;
-	u64 addr = tx->initiator.addr;
+	__host_update_page_state(addr, size, state);
 
-	*completer_addr = tx->initiator.host.completer_addr;
-	return __host_check_page_state_range(addr, size, PKVM_PAGE_OWNED);
+	return 0;
 }
 
-static int host_request_unshare(u64 *completer_addr,
-				const struct pkvm_mem_transition *tx)
+static void __hyp_set_page_state_range(phys_addr_t phys, u64 size, enum pkvm_page_state state)
 {
-	u64 size = tx->nr_pages * PAGE_SIZE;
-	u64 addr = tx->initiator.addr;
-
-	*completer_addr = tx->initiator.host.completer_addr;
-	return __host_check_page_state_range(addr, size, PKVM_PAGE_SHARED_OWNED);
+	for_each_hyp_page(page, phys, size)
+		set_hyp_state(page, state);
 }
 
-static int host_initiate_share(u64 *completer_addr,
-			       const struct pkvm_mem_transition *tx)
+static int __hyp_check_page_state_range(phys_addr_t phys, u64 size, enum pkvm_page_state state)
 {
-	u64 size = tx->nr_pages * PAGE_SIZE;
-	u64 addr = tx->initiator.addr;
+	for_each_hyp_page(page, phys, size) {
+		if (get_hyp_state(page) != state)
+			return -EPERM;
+	}
 
-	*completer_addr = tx->initiator.host.completer_addr;
-	return __host_set_page_state_range(addr, size, PKVM_PAGE_SHARED_OWNED);
+	return 0;
 }
 
-static int host_initiate_unshare(u64 *completer_addr,
-				 const struct pkvm_mem_transition *tx)
+static enum pkvm_page_state guest_get_page_state(kvm_pte_t pte, u64 addr)
 {
-	u64 size = tx->nr_pages * PAGE_SIZE;
-	u64 addr = tx->initiator.addr;
+	if (!kvm_pte_valid(pte))
+		return PKVM_NOPAGE;
 
-	*completer_addr = tx->initiator.host.completer_addr;
-	return __host_set_page_state_range(addr, size, PKVM_PAGE_OWNED);
+	return pkvm_getstate(kvm_pgtable_stage2_pte_prot(pte));
 }
 
-static int host_initiate_donation(u64 *completer_addr,
-				  const struct pkvm_mem_transition *tx)
+static int __guest_check_page_state_range(struct pkvm_hyp_vm *vm, u64 addr,
+					  u64 size, enum pkvm_page_state state)
 {
-	u8 owner_id = tx->completer.id;
-	u64 size = tx->nr_pages * PAGE_SIZE;
-
-	*completer_addr = tx->initiator.host.completer_addr;
-	return host_stage2_set_owner_locked(tx->initiator.addr, size, owner_id);
-}
+	struct check_walk_data d = {
+		.desired	= state,
+		.get_page_state	= guest_get_page_state,
+	};
 
-static bool __host_ack_skip_pgtable_check(const struct pkvm_mem_transition *tx)
-{
-	return !(IS_ENABLED(CONFIG_NVHE_EL2_DEBUG) ||
-		 tx->initiator.id != PKVM_ID_HYP);
+	hyp_assert_lock_held(&vm->lock);
+	return check_page_state_range(&vm->pgt, addr, size, &d);
 }
 
-static int __host_ack_transition(u64 addr, const struct pkvm_mem_transition *tx,
-				 enum pkvm_page_state state)
+int __pkvm_host_share_hyp(u64 pfn)
 {
-	u64 size = tx->nr_pages * PAGE_SIZE;
+	u64 phys = hyp_pfn_to_phys(pfn);
+	u64 size = PAGE_SIZE;
+	int ret;
 
-	if (__host_ack_skip_pgtable_check(tx))
-		return 0;
+	host_lock_component();
+	hyp_lock_component();
 
-	return __host_check_page_state_range(addr, size, state);
-}
+	ret = __host_check_page_state_range(phys, size, PKVM_PAGE_OWNED);
+	if (ret)
+		goto unlock;
+	ret = __hyp_check_page_state_range(phys, size, PKVM_NOPAGE);
+	if (ret)
+		goto unlock;
 
-static int host_ack_donation(u64 addr, const struct pkvm_mem_transition *tx)
-{
-	return __host_ack_transition(addr, tx, PKVM_NOPAGE);
-}
+	__hyp_set_page_state_range(phys, size, PKVM_PAGE_SHARED_BORROWED);
+	WARN_ON(__host_set_page_state_range(phys, size, PKVM_PAGE_SHARED_OWNED));
 
-static int host_complete_donation(u64 addr, const struct pkvm_mem_transition *tx)
-{
-	u64 size = tx->nr_pages * PAGE_SIZE;
-	u8 host_id = tx->completer.id;
+unlock:
+	hyp_unlock_component();
+	host_unlock_component();
 
-	return host_stage2_set_owner_locked(addr, size, host_id);
+	return ret;
 }
 
-static enum pkvm_page_state hyp_get_page_state(kvm_pte_t pte, u64 addr)
+int __pkvm_host_unshare_hyp(u64 pfn)
 {
-	if (!kvm_pte_valid(pte))
-		return PKVM_NOPAGE;
+	u64 phys = hyp_pfn_to_phys(pfn);
+	u64 virt = (u64)__hyp_va(phys);
+	u64 size = PAGE_SIZE;
+	int ret;
 
-	return pkvm_getstate(kvm_pgtable_hyp_pte_prot(pte));
-}
+	host_lock_component();
+	hyp_lock_component();
 
-static int __hyp_check_page_state_range(u64 addr, u64 size,
-					enum pkvm_page_state state)
-{
-	struct check_walk_data d = {
-		.desired	= state,
-		.get_page_state	= hyp_get_page_state,
-	};
+	ret = __host_check_page_state_range(phys, size, PKVM_PAGE_SHARED_OWNED);
+	if (ret)
+		goto unlock;
+	ret = __hyp_check_page_state_range(phys, size, PKVM_PAGE_SHARED_BORROWED);
+	if (ret)
+		goto unlock;
+	if (hyp_page_count((void *)virt)) {
+		ret = -EBUSY;
+		goto unlock;
+	}
 
-	hyp_assert_lock_held(&pkvm_pgd_lock);
-	return check_page_state_range(&pkvm_pgtable, addr, size, &d);
-}
+	__hyp_set_page_state_range(phys, size, PKVM_NOPAGE);
+	WARN_ON(__host_set_page_state_range(phys, size, PKVM_PAGE_OWNED));
 
-static int hyp_request_donation(u64 *completer_addr,
-				const struct pkvm_mem_transition *tx)
-{
-	u64 size = tx->nr_pages * PAGE_SIZE;
-	u64 addr = tx->initiator.addr;
+unlock:
+	hyp_unlock_component();
+	host_unlock_component();
 
-	*completer_addr = tx->initiator.hyp.completer_addr;
-	return __hyp_check_page_state_range(addr, size, PKVM_PAGE_OWNED);
+	return ret;
 }
 
-static int hyp_initiate_donation(u64 *completer_addr,
-				 const struct pkvm_mem_transition *tx)
+int __pkvm_host_donate_hyp(u64 pfn, u64 nr_pages)
 {
-	u64 size = tx->nr_pages * PAGE_SIZE;
+	u64 phys = hyp_pfn_to_phys(pfn);
+	u64 size = PAGE_SIZE * nr_pages;
+	void *virt = __hyp_va(phys);
 	int ret;
 
-	*completer_addr = tx->initiator.hyp.completer_addr;
-	ret = kvm_pgtable_hyp_unmap(&pkvm_pgtable, tx->initiator.addr, size);
-	return (ret != size) ? -EFAULT : 0;
-}
+	if (!pfn_range_is_valid(pfn, nr_pages))
+		return -EINVAL;
 
-static bool __hyp_ack_skip_pgtable_check(const struct pkvm_mem_transition *tx)
-{
-	return !(IS_ENABLED(CONFIG_NVHE_EL2_DEBUG) ||
-		 tx->initiator.id != PKVM_ID_HOST);
-}
+	host_lock_component();
+	hyp_lock_component();
 
-static int hyp_ack_share(u64 addr, const struct pkvm_mem_transition *tx,
-			 enum kvm_pgtable_prot perms)
-{
-	u64 size = tx->nr_pages * PAGE_SIZE;
+	ret = __host_check_page_state_range(phys, size, PKVM_PAGE_OWNED);
+	if (ret)
+		goto unlock;
+	ret = __hyp_check_page_state_range(phys, size, PKVM_NOPAGE);
+	if (ret)
+		goto unlock;
 
-	if (perms != PAGE_HYP)
-		return -EPERM;
+	__hyp_set_page_state_range(phys, size, PKVM_PAGE_OWNED);
+	WARN_ON(pkvm_create_mappings_locked(virt, virt + size, PAGE_HYP));
+	WARN_ON(host_stage2_set_owner_locked(phys, size, PKVM_ID_HYP));
 
-	if (__hyp_ack_skip_pgtable_check(tx))
-		return 0;
+unlock:
+	hyp_unlock_component();
+	host_unlock_component();
 
-	return __hyp_check_page_state_range(addr, size, PKVM_NOPAGE);
+	return ret;
 }
 
-static int hyp_ack_unshare(u64 addr, const struct pkvm_mem_transition *tx)
+int __pkvm_hyp_donate_host(u64 pfn, u64 nr_pages)
 {
-	u64 size = tx->nr_pages * PAGE_SIZE;
+	u64 phys = hyp_pfn_to_phys(pfn);
+	u64 size = PAGE_SIZE * nr_pages;
+	u64 virt = (u64)__hyp_va(phys);
+	int ret;
 
-	if (tx->initiator.id == PKVM_ID_HOST && hyp_page_count((void *)addr))
-		return -EBUSY;
+	if (!pfn_range_is_valid(pfn, nr_pages))
+		return -EINVAL;
 
-	if (__hyp_ack_skip_pgtable_check(tx))
-		return 0;
+	host_lock_component();
+	hyp_lock_component();
 
-	return __hyp_check_page_state_range(addr, size,
-					    PKVM_PAGE_SHARED_BORROWED);
-}
+	ret = __hyp_check_page_state_range(phys, size, PKVM_PAGE_OWNED);
+	if (ret)
+		goto unlock;
+	ret = __host_check_page_state_range(phys, size, PKVM_NOPAGE);
+	if (ret)
+		goto unlock;
 
-static int hyp_ack_donation(u64 addr, const struct pkvm_mem_transition *tx)
-{
-	u64 size = tx->nr_pages * PAGE_SIZE;
+	__hyp_set_page_state_range(phys, size, PKVM_NOPAGE);
+	WARN_ON(kvm_pgtable_hyp_unmap(&pkvm_pgtable, virt, size) != size);
+	WARN_ON(host_stage2_set_owner_locked(phys, size, PKVM_ID_HOST));
 
-	if (__hyp_ack_skip_pgtable_check(tx))
-		return 0;
+unlock:
+	hyp_unlock_component();
+	host_unlock_component();
 
-	return __hyp_check_page_state_range(addr, size, PKVM_NOPAGE);
+	return ret;
 }
 
-static int hyp_complete_share(u64 addr, const struct pkvm_mem_transition *tx,
-			      enum kvm_pgtable_prot perms)
+int hyp_pin_shared_mem(void *from, void *to)
 {
-	void *start = (void *)addr, *end = start + (tx->nr_pages * PAGE_SIZE);
-	enum kvm_pgtable_prot prot;
+	u64 cur, start = ALIGN_DOWN((u64)from, PAGE_SIZE);
+	u64 end = PAGE_ALIGN((u64)to);
+	u64 phys = __hyp_pa(start);
+	u64 size = end - start;
+	struct hyp_page *p;
+	int ret;
 
-	prot = pkvm_mkstate(perms, PKVM_PAGE_SHARED_BORROWED);
-	return pkvm_create_mappings_locked(start, end, prot);
-}
+	host_lock_component();
+	hyp_lock_component();
 
-static int hyp_complete_unshare(u64 addr, const struct pkvm_mem_transition *tx)
-{
-	u64 size = tx->nr_pages * PAGE_SIZE;
-	int ret = kvm_pgtable_hyp_unmap(&pkvm_pgtable, addr, size);
+	ret = __host_check_page_state_range(phys, size, PKVM_PAGE_SHARED_OWNED);
+	if (ret)
+		goto unlock;
 
-	return (ret != size) ? -EFAULT : 0;
-}
+	ret = __hyp_check_page_state_range(phys, size, PKVM_PAGE_SHARED_BORROWED);
+	if (ret)
+		goto unlock;
 
-static int hyp_complete_donation(u64 addr,
-				 const struct pkvm_mem_transition *tx)
-{
-	void *start = (void *)addr, *end = start + (tx->nr_pages * PAGE_SIZE);
-	enum kvm_pgtable_prot prot = pkvm_mkstate(PAGE_HYP, PKVM_PAGE_OWNED);
+	for (cur = start; cur < end; cur += PAGE_SIZE) {
+		p = hyp_virt_to_page(cur);
+		hyp_page_ref_inc(p);
+		if (p->refcount == 1)
+			WARN_ON(pkvm_create_mappings_locked((void *)cur,
+							    (void *)cur + PAGE_SIZE,
+							    PAGE_HYP));
+	}
 
-	return pkvm_create_mappings_locked(start, end, prot);
+unlock:
+	hyp_unlock_component();
+	host_unlock_component();
+
+	return ret;
 }
 
-static int check_share(struct pkvm_mem_share *share)
+void hyp_unpin_shared_mem(void *from, void *to)
 {
-	const struct pkvm_mem_transition *tx = &share->tx;
-	u64 completer_addr;
-	int ret;
-
-	switch (tx->initiator.id) {
-	case PKVM_ID_HOST:
-		ret = host_request_owned_transition(&completer_addr, tx);
-		break;
-	default:
-		ret = -EINVAL;
-	}
+	u64 cur, start = ALIGN_DOWN((u64)from, PAGE_SIZE);
+	u64 end = PAGE_ALIGN((u64)to);
+	struct hyp_page *p;
 
-	if (ret)
-		return ret;
+	host_lock_component();
+	hyp_lock_component();
 
-	switch (tx->completer.id) {
-	case PKVM_ID_HYP:
-		ret = hyp_ack_share(completer_addr, tx, share->completer_prot);
-		break;
-	case PKVM_ID_FFA:
-		/*
-		 * We only check the host; the secure side will check the other
-		 * end when we forward the FFA call.
-		 */
-		ret = 0;
-		break;
-	default:
-		ret = -EINVAL;
+	for (cur = start; cur < end; cur += PAGE_SIZE) {
+		p = hyp_virt_to_page(cur);
+		if (p->refcount == 1)
+			WARN_ON(kvm_pgtable_hyp_unmap(&pkvm_pgtable, cur, PAGE_SIZE) != PAGE_SIZE);
+		hyp_page_ref_dec(p);
 	}
 
-	return ret;
+	hyp_unlock_component();
+	host_unlock_component();
 }
 
-static int __do_share(struct pkvm_mem_share *share)
+int __pkvm_host_share_ffa(u64 pfn, u64 nr_pages)
 {
-	const struct pkvm_mem_transition *tx = &share->tx;
-	u64 completer_addr;
+	u64 phys = hyp_pfn_to_phys(pfn);
+	u64 size = PAGE_SIZE * nr_pages;
 	int ret;
 
-	switch (tx->initiator.id) {
-	case PKVM_ID_HOST:
-		ret = host_initiate_share(&completer_addr, tx);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	if (ret)
-		return ret;
+	if (!pfn_range_is_valid(pfn, nr_pages))
+		return -EINVAL;
 
-	switch (tx->completer.id) {
-	case PKVM_ID_HYP:
-		ret = hyp_complete_share(completer_addr, tx, share->completer_prot);
-		break;
-	case PKVM_ID_FFA:
-		/*
-		 * We're not responsible for any secure page-tables, so there's
-		 * nothing to do here.
-		 */
-		ret = 0;
-		break;
-	default:
-		ret = -EINVAL;
-	}
+	host_lock_component();
+	ret = __host_check_page_state_range(phys, size, PKVM_PAGE_OWNED);
+	if (!ret)
+		ret = __host_set_page_state_range(phys, size, PKVM_PAGE_SHARED_OWNED);
+	host_unlock_component();
 
 	return ret;
 }
 
-/*
- * do_share():
- *
- * The page owner grants access to another component with a given set
- * of permissions.
- *
- * Initiator: OWNED	=> SHARED_OWNED
- * Completer: NOPAGE	=> SHARED_BORROWED
- */
-static int do_share(struct pkvm_mem_share *share)
+int __pkvm_host_unshare_ffa(u64 pfn, u64 nr_pages)
 {
+	u64 phys = hyp_pfn_to_phys(pfn);
+	u64 size = PAGE_SIZE * nr_pages;
 	int ret;
 
-	ret = check_share(share);
-	if (ret)
-		return ret;
+	if (!pfn_range_is_valid(pfn, nr_pages))
+		return -EINVAL;
 
-	return WARN_ON(__do_share(share));
+	host_lock_component();
+	ret = __host_check_page_state_range(phys, size, PKVM_PAGE_SHARED_OWNED);
+	if (!ret)
+		ret = __host_set_page_state_range(phys, size, PKVM_PAGE_OWNED);
+	host_unlock_component();
+
+	return ret;
 }
 
-static int check_unshare(struct pkvm_mem_share *share)
+static int __guest_check_transition_size(u64 phys, u64 ipa, u64 nr_pages, u64 *size)
 {
-	const struct pkvm_mem_transition *tx = &share->tx;
-	u64 completer_addr;
-	int ret;
+	size_t block_size;
 
-	switch (tx->initiator.id) {
-	case PKVM_ID_HOST:
-		ret = host_request_unshare(&completer_addr, tx);
-		break;
-	default:
-		ret = -EINVAL;
+	if (nr_pages == 1) {
+		*size = PAGE_SIZE;
+		return 0;
 	}
 
-	if (ret)
-		return ret;
+	/* We solely support second to last level huge mapping */
+	block_size = kvm_granule_size(KVM_PGTABLE_LAST_LEVEL - 1);
 
-	switch (tx->completer.id) {
-	case PKVM_ID_HYP:
-		ret = hyp_ack_unshare(completer_addr, tx);
-		break;
-	case PKVM_ID_FFA:
-		/* See check_share() */
-		ret = 0;
-		break;
-	default:
-		ret = -EINVAL;
-	}
+	if (nr_pages != block_size >> PAGE_SHIFT)
+		return -EINVAL;
 
-	return ret;
+	if (!IS_ALIGNED(phys | ipa, block_size))
+		return -EINVAL;
+
+	*size = block_size;
+	return 0;
 }
 
-static int __do_unshare(struct pkvm_mem_share *share)
+int __pkvm_host_share_guest(u64 pfn, u64 gfn, u64 nr_pages, struct pkvm_hyp_vcpu *vcpu,
+			    enum kvm_pgtable_prot prot)
 {
-	const struct pkvm_mem_transition *tx = &share->tx;
-	u64 completer_addr;
+	struct pkvm_hyp_vm *vm = pkvm_hyp_vcpu_to_hyp_vm(vcpu);
+	u64 phys = hyp_pfn_to_phys(pfn);
+	u64 ipa = hyp_pfn_to_phys(gfn);
+	u64 size;
 	int ret;
 
-	switch (tx->initiator.id) {
-	case PKVM_ID_HOST:
-		ret = host_initiate_unshare(&completer_addr, tx);
-		break;
-	default:
-		ret = -EINVAL;
-	}
+	if (prot & ~KVM_PGTABLE_PROT_RWX)
+		return -EINVAL;
+
+	if (!pfn_range_is_valid(pfn, nr_pages))
+		return -EINVAL;
 
+	ret = __guest_check_transition_size(phys, ipa, nr_pages, &size);
 	if (ret)
 		return ret;
 
-	switch (tx->completer.id) {
-	case PKVM_ID_HYP:
-		ret = hyp_complete_unshare(completer_addr, tx);
-		break;
-	case PKVM_ID_FFA:
-		/* See __do_share() */
-		ret = 0;
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-/*
- * do_unshare():
- *
- * The page owner revokes access from another component for a range of
- * pages which were previously shared using do_share().
- *
- * Initiator: SHARED_OWNED	=> OWNED
- * Completer: SHARED_BORROWED	=> NOPAGE
- */
-static int do_unshare(struct pkvm_mem_share *share)
-{
-	int ret;
-
-	ret = check_unshare(share);
+	ret = check_range_allowed_memory(phys, phys + size);
 	if (ret)
 		return ret;
 
-	return WARN_ON(__do_unshare(share));
-}
+	host_lock_component();
+	guest_lock_component(vm);
 
-static int check_donation(struct pkvm_mem_donation *donation)
-{
-	const struct pkvm_mem_transition *tx = &donation->tx;
-	u64 completer_addr;
-	int ret;
+	ret = __guest_check_page_state_range(vm, ipa, size, PKVM_NOPAGE);
+	if (ret)
+		goto unlock;
 
-	switch (tx->initiator.id) {
-	case PKVM_ID_HOST:
-		ret = host_request_owned_transition(&completer_addr, tx);
-		break;
-	case PKVM_ID_HYP:
-		ret = hyp_request_donation(&completer_addr, tx);
-		break;
-	default:
-		ret = -EINVAL;
+	for_each_hyp_page(page, phys, size) {
+		switch (get_host_state(page)) {
+		case PKVM_PAGE_OWNED:
+			continue;
+		case PKVM_PAGE_SHARED_OWNED:
+			if (page->host_share_guest_count == U32_MAX) {
+				ret = -EBUSY;
+				goto unlock;
+			}
+
+			/* Only host to np-guest multi-sharing is tolerated */
+			if (page->host_share_guest_count)
+				continue;
+
+			fallthrough;
+		default:
+			ret = -EPERM;
+			goto unlock;
+		}
 	}
 
-	if (ret)
-		return ret;
-
-	switch (tx->completer.id) {
-	case PKVM_ID_HOST:
-		ret = host_ack_donation(completer_addr, tx);
-		break;
-	case PKVM_ID_HYP:
-		ret = hyp_ack_donation(completer_addr, tx);
-		break;
-	default:
-		ret = -EINVAL;
+	for_each_hyp_page(page, phys, size) {
+		set_host_state(page, PKVM_PAGE_SHARED_OWNED);
+		page->host_share_guest_count++;
 	}
 
+	WARN_ON(kvm_pgtable_stage2_map(&vm->pgt, ipa, size, phys,
+				       pkvm_mkstate(prot, PKVM_PAGE_SHARED_BORROWED),
+				       &vcpu->vcpu.arch.pkvm_memcache, 0));
+
+unlock:
+	guest_unlock_component(vm);
+	host_unlock_component();
+
 	return ret;
 }
 
-static int __do_donate(struct pkvm_mem_donation *donation)
+static int __check_host_shared_guest(struct pkvm_hyp_vm *vm, u64 *__phys, u64 ipa, u64 size)
 {
-	const struct pkvm_mem_transition *tx = &donation->tx;
-	u64 completer_addr;
+	enum pkvm_page_state state;
+	kvm_pte_t pte;
+	u64 phys;
+	s8 level;
 	int ret;
 
-	switch (tx->initiator.id) {
-	case PKVM_ID_HOST:
-		ret = host_initiate_donation(&completer_addr, tx);
-		break;
-	case PKVM_ID_HYP:
-		ret = hyp_initiate_donation(&completer_addr, tx);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
+	ret = kvm_pgtable_get_leaf(&vm->pgt, ipa, &pte, &level);
 	if (ret)
 		return ret;
+	if (!kvm_pte_valid(pte))
+		return -ENOENT;
+	if (size && kvm_granule_size(level) != size)
+		return -E2BIG;
 
-	switch (tx->completer.id) {
-	case PKVM_ID_HOST:
-		ret = host_complete_donation(completer_addr, tx);
-		break;
-	case PKVM_ID_HYP:
-		ret = hyp_complete_donation(completer_addr, tx);
-		break;
-	default:
-		ret = -EINVAL;
+	if (!size)
+		size = kvm_granule_size(level);
+
+	state = guest_get_page_state(pte, ipa);
+	if (state != PKVM_PAGE_SHARED_BORROWED)
+		return -EPERM;
+
+	phys = kvm_pte_to_phys(pte);
+	ret = check_range_allowed_memory(phys, phys + size);
+	if (WARN_ON(ret))
+		return ret;
+
+	for_each_hyp_page(page, phys, size) {
+		if (get_host_state(page) != PKVM_PAGE_SHARED_OWNED)
+			return -EPERM;
+		if (WARN_ON(!page->host_share_guest_count))
+			return -EINVAL;
 	}
 
-	return ret;
+	*__phys = phys;
+
+	return 0;
 }
 
-/*
- * do_donate():
- *
- * The page owner transfers ownership to another component, losing access
- * as a consequence.
- *
- * Initiator: OWNED	=> NOPAGE
- * Completer: NOPAGE	=> OWNED
- */
-static int do_donate(struct pkvm_mem_donation *donation)
+int __pkvm_host_unshare_guest(u64 gfn, u64 nr_pages, struct pkvm_hyp_vm *vm)
 {
+	u64 ipa = hyp_pfn_to_phys(gfn);
+	u64 size, phys;
 	int ret;
 
-	ret = check_donation(donation);
+	ret = __guest_check_transition_size(0, ipa, nr_pages, &size);
 	if (ret)
 		return ret;
 
-	return WARN_ON(__do_donate(donation));
-}
+	host_lock_component();
+	guest_lock_component(vm);
 
-int __pkvm_host_share_hyp(u64 pfn)
-{
-	int ret;
-	u64 host_addr = hyp_pfn_to_phys(pfn);
-	u64 hyp_addr = (u64)__hyp_va(host_addr);
-	struct pkvm_mem_share share = {
-		.tx	= {
-			.nr_pages	= 1,
-			.initiator	= {
-				.id	= PKVM_ID_HOST,
-				.addr	= host_addr,
-				.host	= {
-					.completer_addr = hyp_addr,
-				},
-			},
-			.completer	= {
-				.id	= PKVM_ID_HYP,
-			},
-		},
-		.completer_prot	= PAGE_HYP,
-	};
+	ret = __check_host_shared_guest(vm, &phys, ipa, size);
+	if (ret)
+		goto unlock;
 
-	host_lock_component();
-	hyp_lock_component();
+	ret = kvm_pgtable_stage2_unmap(&vm->pgt, ipa, size);
+	if (ret)
+		goto unlock;
 
-	ret = do_share(&share);
+	for_each_hyp_page(page, phys, size) {
+		/* __check_host_shared_guest() protects against underflow */
+		page->host_share_guest_count--;
+		if (!page->host_share_guest_count)
+			set_host_state(page, PKVM_PAGE_OWNED);
+	}
 
-	hyp_unlock_component();
+unlock:
+	guest_unlock_component(vm);
 	host_unlock_component();
 
 	return ret;
 }
 
-int __pkvm_host_unshare_hyp(u64 pfn)
+static void assert_host_shared_guest(struct pkvm_hyp_vm *vm, u64 ipa, u64 size)
 {
+	u64 phys;
 	int ret;
-	u64 host_addr = hyp_pfn_to_phys(pfn);
-	u64 hyp_addr = (u64)__hyp_va(host_addr);
-	struct pkvm_mem_share share = {
-		.tx	= {
-			.nr_pages	= 1,
-			.initiator	= {
-				.id	= PKVM_ID_HOST,
-				.addr	= host_addr,
-				.host	= {
-					.completer_addr = hyp_addr,
-				},
-			},
-			.completer	= {
-				.id	= PKVM_ID_HYP,
-			},
-		},
-		.completer_prot	= PAGE_HYP,
-	};
+
+	if (!IS_ENABLED(CONFIG_NVHE_EL2_DEBUG))
+		return;
 
 	host_lock_component();
-	hyp_lock_component();
+	guest_lock_component(vm);
 
-	ret = do_unshare(&share);
+	ret = __check_host_shared_guest(vm, &phys, ipa, size);
 
-	hyp_unlock_component();
+	guest_unlock_component(vm);
 	host_unlock_component();
 
-	return ret;
+	WARN_ON(ret && ret != -ENOENT);
 }
 
-int __pkvm_host_donate_hyp(u64 pfn, u64 nr_pages)
+int __pkvm_host_relax_perms_guest(u64 gfn, struct pkvm_hyp_vcpu *vcpu, enum kvm_pgtable_prot prot)
 {
+	struct pkvm_hyp_vm *vm = pkvm_hyp_vcpu_to_hyp_vm(vcpu);
+	u64 ipa = hyp_pfn_to_phys(gfn);
 	int ret;
-	u64 host_addr = hyp_pfn_to_phys(pfn);
-	u64 hyp_addr = (u64)__hyp_va(host_addr);
-	struct pkvm_mem_donation donation = {
-		.tx	= {
-			.nr_pages	= nr_pages,
-			.initiator	= {
-				.id	= PKVM_ID_HOST,
-				.addr	= host_addr,
-				.host	= {
-					.completer_addr = hyp_addr,
-				},
-			},
-			.completer	= {
-				.id	= PKVM_ID_HYP,
-			},
-		},
-	};
 
-	host_lock_component();
-	hyp_lock_component();
+	if (pkvm_hyp_vm_is_protected(vm))
+		return -EPERM;
 
-	ret = do_donate(&donation);
+	if (prot & ~KVM_PGTABLE_PROT_RWX)
+		return -EINVAL;
 
-	hyp_unlock_component();
-	host_unlock_component();
+	assert_host_shared_guest(vm, ipa, 0);
+	guest_lock_component(vm);
+	ret = kvm_pgtable_stage2_relax_perms(&vm->pgt, ipa, prot, 0);
+	guest_unlock_component(vm);
 
 	return ret;
 }
 
-int __pkvm_hyp_donate_host(u64 pfn, u64 nr_pages)
+int __pkvm_host_wrprotect_guest(u64 gfn, u64 nr_pages, struct pkvm_hyp_vm *vm)
 {
+	u64 size, ipa = hyp_pfn_to_phys(gfn);
 	int ret;
-	u64 host_addr = hyp_pfn_to_phys(pfn);
-	u64 hyp_addr = (u64)__hyp_va(host_addr);
-	struct pkvm_mem_donation donation = {
-		.tx	= {
-			.nr_pages	= nr_pages,
-			.initiator	= {
-				.id	= PKVM_ID_HYP,
-				.addr	= hyp_addr,
-				.hyp	= {
-					.completer_addr = host_addr,
-				},
-			},
-			.completer	= {
-				.id	= PKVM_ID_HOST,
-			},
-		},
-	};
 
-	host_lock_component();
-	hyp_lock_component();
+	if (pkvm_hyp_vm_is_protected(vm))
+		return -EPERM;
 
-	ret = do_donate(&donation);
+	ret = __guest_check_transition_size(0, ipa, nr_pages, &size);
+	if (ret)
+		return ret;
 
-	hyp_unlock_component();
-	host_unlock_component();
+	assert_host_shared_guest(vm, ipa, size);
+	guest_lock_component(vm);
+	ret = kvm_pgtable_stage2_wrprotect(&vm->pgt, ipa, size);
+	guest_unlock_component(vm);
 
 	return ret;
 }
 
-int hyp_pin_shared_mem(void *from, void *to)
+int __pkvm_host_test_clear_young_guest(u64 gfn, u64 nr_pages, bool mkold, struct pkvm_hyp_vm *vm)
 {
-	u64 cur, start = ALIGN_DOWN((u64)from, PAGE_SIZE);
-	u64 end = PAGE_ALIGN((u64)to);
-	u64 size = end - start;
+	u64 size, ipa = hyp_pfn_to_phys(gfn);
 	int ret;
 
-	host_lock_component();
-	hyp_lock_component();
-
-	ret = __host_check_page_state_range(__hyp_pa(start), size,
-					    PKVM_PAGE_SHARED_OWNED);
-	if (ret)
-		goto unlock;
+	if (pkvm_hyp_vm_is_protected(vm))
+		return -EPERM;
 
-	ret = __hyp_check_page_state_range(start, size,
-					   PKVM_PAGE_SHARED_BORROWED);
+	ret = __guest_check_transition_size(0, ipa, nr_pages, &size);
 	if (ret)
-		goto unlock;
-
-	for (cur = start; cur < end; cur += PAGE_SIZE)
-		hyp_page_ref_inc(hyp_virt_to_page(cur));
+		return ret;
 
-unlock:
-	hyp_unlock_component();
-	host_unlock_component();
+	assert_host_shared_guest(vm, ipa, size);
+	guest_lock_component(vm);
+	ret = kvm_pgtable_stage2_test_clear_young(&vm->pgt, ipa, size, mkold);
+	guest_unlock_component(vm);
 
 	return ret;
 }
 
-void hyp_unpin_shared_mem(void *from, void *to)
+int __pkvm_host_mkyoung_guest(u64 gfn, struct pkvm_hyp_vcpu *vcpu)
 {
-	u64 cur, start = ALIGN_DOWN((u64)from, PAGE_SIZE);
-	u64 end = PAGE_ALIGN((u64)to);
+	struct pkvm_hyp_vm *vm = pkvm_hyp_vcpu_to_hyp_vm(vcpu);
+	u64 ipa = hyp_pfn_to_phys(gfn);
 
-	host_lock_component();
-	hyp_lock_component();
+	if (pkvm_hyp_vm_is_protected(vm))
+		return -EPERM;
 
-	for (cur = start; cur < end; cur += PAGE_SIZE)
-		hyp_page_ref_dec(hyp_virt_to_page(cur));
+	assert_host_shared_guest(vm, ipa, 0);
+	guest_lock_component(vm);
+	kvm_pgtable_stage2_mkyoung(&vm->pgt, ipa, 0);
+	guest_unlock_component(vm);
 
-	hyp_unlock_component();
-	host_unlock_component();
+	return 0;
 }
 
-int __pkvm_host_share_ffa(u64 pfn, u64 nr_pages)
-{
-	int ret;
-	struct pkvm_mem_share share = {
-		.tx	= {
-			.nr_pages	= nr_pages,
-			.initiator	= {
-				.id	= PKVM_ID_HOST,
-				.addr	= hyp_pfn_to_phys(pfn),
-			},
-			.completer	= {
-				.id	= PKVM_ID_FFA,
+#ifdef CONFIG_NVHE_EL2_DEBUG
+struct pkvm_expected_state {
+	enum pkvm_page_state host;
+	enum pkvm_page_state hyp;
+	enum pkvm_page_state guest[2]; /* [ gfn, gfn + 1 ] */
+};
+
+static struct pkvm_expected_state selftest_state;
+static struct hyp_page *selftest_page;
+
+static struct pkvm_hyp_vm selftest_vm = {
+	.kvm = {
+		.arch = {
+			.mmu = {
+				.arch = &selftest_vm.kvm.arch,
+				.pgt = &selftest_vm.pgt,
 			},
 		},
-	};
+	},
+};
 
-	host_lock_component();
-	ret = do_share(&share);
-	host_unlock_component();
+static struct pkvm_hyp_vcpu selftest_vcpu = {
+	.vcpu = {
+		.arch = {
+			.hw_mmu = &selftest_vm.kvm.arch.mmu,
+		},
+		.kvm = &selftest_vm.kvm,
+	},
+};
 
-	return ret;
+static void init_selftest_vm(void *virt)
+{
+	struct hyp_page *p = hyp_virt_to_page(virt);
+	int i;
+
+	selftest_vm.kvm.arch.mmu.vtcr = host_mmu.arch.mmu.vtcr;
+	WARN_ON(kvm_guest_prepare_stage2(&selftest_vm, virt));
+
+	for (i = 0; i < pkvm_selftest_pages(); i++) {
+		if (p[i].refcount)
+			continue;
+		p[i].refcount = 1;
+		hyp_put_page(&selftest_vm.pool, hyp_page_to_virt(&p[i]));
+	}
 }
 
-int __pkvm_host_unshare_ffa(u64 pfn, u64 nr_pages)
+static u64 selftest_ipa(void)
 {
-	int ret;
-	struct pkvm_mem_share share = {
-		.tx	= {
-			.nr_pages	= nr_pages,
-			.initiator	= {
-				.id	= PKVM_ID_HOST,
-				.addr	= hyp_pfn_to_phys(pfn),
-			},
-			.completer	= {
-				.id	= PKVM_ID_FFA,
-			},
-		},
-	};
+	return BIT(selftest_vm.pgt.ia_bits - 1);
+}
+
+static void assert_page_state(void)
+{
+	void *virt = hyp_page_to_virt(selftest_page);
+	u64 size = PAGE_SIZE << selftest_page->order;
+	struct pkvm_hyp_vcpu *vcpu = &selftest_vcpu;
+	u64 phys = hyp_virt_to_phys(virt);
+	u64 ipa[2] = { selftest_ipa(), selftest_ipa() + PAGE_SIZE };
+	struct pkvm_hyp_vm *vm;
+
+	vm = pkvm_hyp_vcpu_to_hyp_vm(vcpu);
 
 	host_lock_component();
-	ret = do_unshare(&share);
+	WARN_ON(__host_check_page_state_range(phys, size, selftest_state.host));
 	host_unlock_component();
 
-	return ret;
-}
+	hyp_lock_component();
+	WARN_ON(__hyp_check_page_state_range(phys, size, selftest_state.hyp));
+	hyp_unlock_component();
+
+	guest_lock_component(&selftest_vm);
+	WARN_ON(__guest_check_page_state_range(vm, ipa[0], size, selftest_state.guest[0]));
+	WARN_ON(__guest_check_page_state_range(vm, ipa[1], size, selftest_state.guest[1]));
+	guest_unlock_component(&selftest_vm);
+}
+
+#define assert_transition_res(res, fn, ...)		\
+	do {						\
+		WARN_ON(fn(__VA_ARGS__) != res);	\
+		assert_page_state();			\
+	} while (0)
+
+void pkvm_ownership_selftest(void *base)
+{
+	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_RWX;
+	void *virt = hyp_alloc_pages(&host_s2_pool, 0);
+	struct pkvm_hyp_vcpu *vcpu = &selftest_vcpu;
+	struct pkvm_hyp_vm *vm = &selftest_vm;
+	u64 phys, size, pfn, gfn;
+
+	WARN_ON(!virt);
+	selftest_page = hyp_virt_to_page(virt);
+	selftest_page->refcount = 0;
+	init_selftest_vm(base);
+
+	size = PAGE_SIZE << selftest_page->order;
+	phys = hyp_virt_to_phys(virt);
+	pfn = hyp_phys_to_pfn(phys);
+	gfn = hyp_phys_to_pfn(selftest_ipa());
+
+	selftest_state.host = PKVM_NOPAGE;
+	selftest_state.hyp = PKVM_PAGE_OWNED;
+	selftest_state.guest[0] = selftest_state.guest[1] = PKVM_NOPAGE;
+	assert_page_state();
+	assert_transition_res(-EPERM,	__pkvm_host_donate_hyp, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	hyp_pin_shared_mem, virt, virt + size);
+	assert_transition_res(-EPERM,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-ENOENT,	__pkvm_host_unshare_guest, gfn, 1, vm);
+
+	selftest_state.host = PKVM_PAGE_OWNED;
+	selftest_state.hyp = PKVM_NOPAGE;
+	assert_transition_res(0,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_ffa, pfn, 1);
+	assert_transition_res(-ENOENT,	__pkvm_host_unshare_guest, gfn, 1, vm);
+	assert_transition_res(-EPERM,	hyp_pin_shared_mem, virt, virt + size);
+
+	selftest_state.host = PKVM_PAGE_SHARED_OWNED;
+	selftest_state.hyp = PKVM_PAGE_SHARED_BORROWED;
+	assert_transition_res(0,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_donate_hyp, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-ENOENT,	__pkvm_host_unshare_guest, gfn, 1, vm);
+
+	assert_transition_res(0,	hyp_pin_shared_mem, virt, virt + size);
+	assert_transition_res(0,	hyp_pin_shared_mem, virt, virt + size);
+	hyp_unpin_shared_mem(virt, virt + size);
+	WARN_ON(hyp_page_count(virt) != 1);
+	assert_transition_res(-EBUSY,	__pkvm_host_unshare_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_donate_hyp, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-ENOENT,	__pkvm_host_unshare_guest, gfn, 1, vm);
+
+	hyp_unpin_shared_mem(virt, virt + size);
+	assert_page_state();
+	WARN_ON(hyp_page_count(virt));
+
+	selftest_state.host = PKVM_PAGE_OWNED;
+	selftest_state.hyp = PKVM_NOPAGE;
+	assert_transition_res(0,	__pkvm_host_unshare_hyp, pfn);
+
+	selftest_state.host = PKVM_PAGE_SHARED_OWNED;
+	selftest_state.hyp = PKVM_NOPAGE;
+	assert_transition_res(0,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_donate_hyp, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-ENOENT,	__pkvm_host_unshare_guest, gfn, 1, vm);
+	assert_transition_res(-EPERM,	hyp_pin_shared_mem, virt, virt + size);
+
+	selftest_state.host = PKVM_PAGE_OWNED;
+	selftest_state.hyp = PKVM_NOPAGE;
+	assert_transition_res(0,	__pkvm_host_unshare_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_ffa, pfn, 1);
+
+	selftest_state.host = PKVM_PAGE_SHARED_OWNED;
+	selftest_state.guest[0] = PKVM_PAGE_SHARED_BORROWED;
+	assert_transition_res(0,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-EPERM,	__pkvm_host_share_guest, pfn, gfn, 1, vcpu, prot);
+	assert_transition_res(-EPERM,	__pkvm_host_share_ffa, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_donate_hyp, pfn, 1);
+	assert_transition_res(-EPERM,	__pkvm_host_share_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_host_unshare_hyp, pfn);
+	assert_transition_res(-EPERM,	__pkvm_hyp_donate_host, pfn, 1);
+	assert_transition_res(-EPERM,	hyp_pin_shared_mem, virt, virt + size);
+
+	selftest_state.guest[1] = PKVM_PAGE_SHARED_BORROWED;
+	assert_transition_res(0,	__pkvm_host_share_guest, pfn, gfn + 1, 1, vcpu, prot);
+	WARN_ON(hyp_virt_to_page(virt)->host_share_guest_count != 2);
+
+	selftest_state.guest[0] = PKVM_NOPAGE;
+	assert_transition_res(0,	__pkvm_host_unshare_guest, gfn, 1, vm);
+
+	selftest_state.guest[1] = PKVM_NOPAGE;
+	selftest_state.host = PKVM_PAGE_OWNED;
+	assert_transition_res(0,	__pkvm_host_unshare_guest, gfn + 1, 1, vm);
+
+	selftest_state.host = PKVM_NOPAGE;
+	selftest_state.hyp = PKVM_PAGE_OWNED;
+	assert_transition_res(0,	__pkvm_host_donate_hyp, pfn, 1);
+
+	selftest_page->refcount = 1;
+	hyp_put_page(&host_s2_pool, virt);
+}
+#endif
diff --git a/arch/arm64/kvm/hyp/nvhe/mm.c b/arch/arm64/kvm/hyp/nvhe/mm.c
index 8850b591d775..ae8391baebc3 100644
--- a/arch/arm64/kvm/hyp/nvhe/mm.c
+++ b/arch/arm64/kvm/hyp/nvhe/mm.c
@@ -229,9 +229,8 @@ int hyp_map_vectors(void)
 	return 0;
 }
 
-void *hyp_fixmap_map(phys_addr_t phys)
+static void *fixmap_map_slot(struct hyp_fixmap_slot *slot, phys_addr_t phys)
 {
-	struct hyp_fixmap_slot *slot = this_cpu_ptr(&fixmap_slots);
 	kvm_pte_t pte, *ptep = slot->ptep;
 
 	pte = *ptep;
@@ -243,10 +242,21 @@ void *hyp_fixmap_map(phys_addr_t phys)
 	return (void *)slot->addr;
 }
 
+void *hyp_fixmap_map(phys_addr_t phys)
+{
+	return fixmap_map_slot(this_cpu_ptr(&fixmap_slots), phys);
+}
+
 static void fixmap_clear_slot(struct hyp_fixmap_slot *slot)
 {
 	kvm_pte_t *ptep = slot->ptep;
 	u64 addr = slot->addr;
+	u32 level;
+
+	if (FIELD_GET(KVM_PTE_TYPE, *ptep) == KVM_PTE_TYPE_PAGE)
+		level = KVM_PGTABLE_LAST_LEVEL;
+	else
+		level = KVM_PGTABLE_LAST_LEVEL - 1; /* create_fixblock() guarantees PMD level */
 
 	WRITE_ONCE(*ptep, *ptep & ~KVM_PTE_VALID);
 
@@ -260,7 +270,7 @@ static void fixmap_clear_slot(struct hyp_fixmap_slot *slot)
 	 * https://lore.kernel.org/kvm/20221017115209.2099-1-will@kernel.org/T/#mf10dfbaf1eaef9274c581b81c53758918c1d0f03
 	 */
 	dsb(ishst);
-	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), KVM_PGTABLE_LAST_LEVEL);
+	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), level);
 	dsb(ish);
 	isb();
 }
@@ -273,9 +283,9 @@ void hyp_fixmap_unmap(void)
 static int __create_fixmap_slot_cb(const struct kvm_pgtable_visit_ctx *ctx,
 				   enum kvm_pgtable_walk_flags visit)
 {
-	struct hyp_fixmap_slot *slot = per_cpu_ptr(&fixmap_slots, (u64)ctx->arg);
+	struct hyp_fixmap_slot *slot = (struct hyp_fixmap_slot *)ctx->arg;
 
-	if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_LAST_LEVEL)
+	if (!kvm_pte_valid(ctx->old) || (ctx->end - ctx->start) != kvm_granule_size(ctx->level))
 		return -EINVAL;
 
 	slot->addr = ctx->addr;
@@ -296,13 +306,84 @@ static int create_fixmap_slot(u64 addr, u64 cpu)
 	struct kvm_pgtable_walker walker = {
 		.cb	= __create_fixmap_slot_cb,
 		.flags	= KVM_PGTABLE_WALK_LEAF,
-		.arg = (void *)cpu,
+		.arg	= per_cpu_ptr(&fixmap_slots, cpu),
 	};
 
 	return kvm_pgtable_walk(&pkvm_pgtable, addr, PAGE_SIZE, &walker);
 }
 
-int hyp_create_pcpu_fixmap(void)
+#if PAGE_SHIFT < 16
+#define HAS_FIXBLOCK
+static struct hyp_fixmap_slot hyp_fixblock_slot;
+static DEFINE_HYP_SPINLOCK(hyp_fixblock_lock);
+#endif
+
+static int create_fixblock(void)
+{
+#ifdef HAS_FIXBLOCK
+	struct kvm_pgtable_walker walker = {
+		.cb	= __create_fixmap_slot_cb,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+		.arg	= &hyp_fixblock_slot,
+	};
+	unsigned long addr;
+	phys_addr_t phys;
+	int ret, i;
+
+	/* Find a RAM phys address, PMD aligned */
+	for (i = 0; i < hyp_memblock_nr; i++) {
+		phys = ALIGN(hyp_memory[i].base, PMD_SIZE);
+		if (phys + PMD_SIZE < (hyp_memory[i].base + hyp_memory[i].size))
+			break;
+	}
+
+	if (i >= hyp_memblock_nr)
+		return -EINVAL;
+
+	hyp_spin_lock(&pkvm_pgd_lock);
+	addr = ALIGN(__io_map_base, PMD_SIZE);
+	ret = __pkvm_alloc_private_va_range(addr, PMD_SIZE);
+	if (ret)
+		goto unlock;
+
+	ret = kvm_pgtable_hyp_map(&pkvm_pgtable, addr, PMD_SIZE, phys, PAGE_HYP);
+	if (ret)
+		goto unlock;
+
+	ret = kvm_pgtable_walk(&pkvm_pgtable, addr, PMD_SIZE, &walker);
+
+unlock:
+	hyp_spin_unlock(&pkvm_pgd_lock);
+
+	return ret;
+#else
+	return 0;
+#endif
+}
+
+void *hyp_fixblock_map(phys_addr_t phys, size_t *size)
+{
+#ifdef HAS_FIXBLOCK
+	*size = PMD_SIZE;
+	hyp_spin_lock(&hyp_fixblock_lock);
+	return fixmap_map_slot(&hyp_fixblock_slot, phys);
+#else
+	*size = PAGE_SIZE;
+	return hyp_fixmap_map(phys);
+#endif
+}
+
+void hyp_fixblock_unmap(void)
+{
+#ifdef HAS_FIXBLOCK
+	fixmap_clear_slot(&hyp_fixblock_slot);
+	hyp_spin_unlock(&hyp_fixblock_lock);
+#else
+	hyp_fixmap_unmap();
+#endif
+}
+
+int hyp_create_fixmap(void)
 {
 	unsigned long addr, i;
 	int ret;
@@ -322,7 +403,7 @@ int hyp_create_pcpu_fixmap(void)
 			return ret;
 	}
 
-	return 0;
+	return create_fixblock();
 }
 
 int hyp_create_idmap(u32 hyp_va_bits)
@@ -360,10 +441,10 @@ int pkvm_create_stack(phys_addr_t phys, unsigned long *haddr)
 
 	prev_base = __io_map_base;
 	/*
-	 * Efficient stack verification using the PAGE_SHIFT bit implies
+	 * Efficient stack verification using the NVHE_STACK_SHIFT bit implies
 	 * an alignment of our allocation on the order of the size.
 	 */
-	size = PAGE_SIZE * 2;
+	size = NVHE_STACK_SIZE * 2;
 	addr = ALIGN(__io_map_base, size);
 
 	ret = __pkvm_alloc_private_va_range(addr, size);
@@ -373,12 +454,12 @@ int pkvm_create_stack(phys_addr_t phys, unsigned long *haddr)
 		 * at the higher address and leave the lower guard page
 		 * unbacked.
 		 *
-		 * Any valid stack address now has the PAGE_SHIFT bit as 1
+		 * Any valid stack address now has the NVHE_STACK_SHIFT bit as 1
 		 * and addresses corresponding to the guard page have the
-		 * PAGE_SHIFT bit as 0 - this is used for overflow detection.
+		 * NVHE_STACK_SHIFT bit as 0 - this is used for overflow detection.
 		 */
-		ret = kvm_pgtable_hyp_map(&pkvm_pgtable, addr + PAGE_SIZE,
-					  PAGE_SIZE, phys, PAGE_HYP);
+		ret = kvm_pgtable_hyp_map(&pkvm_pgtable, addr + NVHE_STACK_SIZE,
+					  NVHE_STACK_SIZE, phys, PAGE_HYP);
 		if (ret)
 			__io_map_base = prev_base;
 	}
diff --git a/arch/arm64/kvm/hyp/nvhe/page_alloc.c b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
index e691290d3765..a1eb27a1a747 100644
--- a/arch/arm64/kvm/hyp/nvhe/page_alloc.c
+++ b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
@@ -32,7 +32,7 @@ u64 __hyp_vmemmap;
  */
 static struct hyp_page *__find_buddy_nocheck(struct hyp_pool *pool,
 					     struct hyp_page *p,
-					     unsigned short order)
+					     u8 order)
 {
 	phys_addr_t addr = hyp_page_to_phys(p);
 
@@ -51,7 +51,7 @@ static struct hyp_page *__find_buddy_nocheck(struct hyp_pool *pool,
 /* Find a buddy page currently available for allocation */
 static struct hyp_page *__find_buddy_avail(struct hyp_pool *pool,
 					   struct hyp_page *p,
-					   unsigned short order)
+					   u8 order)
 {
 	struct hyp_page *buddy = __find_buddy_nocheck(pool, p, order);
 
@@ -94,7 +94,7 @@ static void __hyp_attach_page(struct hyp_pool *pool,
 			      struct hyp_page *p)
 {
 	phys_addr_t phys = hyp_page_to_phys(p);
-	unsigned short order = p->order;
+	u8 order = p->order;
 	struct hyp_page *buddy;
 
 	memset(hyp_page_to_virt(p), 0, PAGE_SIZE << p->order);
@@ -129,7 +129,7 @@ insert:
 
 static struct hyp_page *__hyp_extract_page(struct hyp_pool *pool,
 					   struct hyp_page *p,
-					   unsigned short order)
+					   u8 order)
 {
 	struct hyp_page *buddy;
 
@@ -183,7 +183,7 @@ void hyp_get_page(struct hyp_pool *pool, void *addr)
 
 void hyp_split_page(struct hyp_page *p)
 {
-	unsigned short order = p->order;
+	u8 order = p->order;
 	unsigned int i;
 
 	p->order = 0;
@@ -195,10 +195,10 @@ void hyp_split_page(struct hyp_page *p)
 	}
 }
 
-void *hyp_alloc_pages(struct hyp_pool *pool, unsigned short order)
+void *hyp_alloc_pages(struct hyp_pool *pool, u8 order)
 {
-	unsigned short i = order;
 	struct hyp_page *p;
+	u8 i = order;
 
 	hyp_spin_lock(&pool->lock);
 
diff --git a/arch/arm64/kvm/hyp/nvhe/pkvm.c b/arch/arm64/kvm/hyp/nvhe/pkvm.c
index 01616c39a810..8911338961c5 100644
--- a/arch/arm64/kvm/hyp/nvhe/pkvm.c
+++ b/arch/arm64/kvm/hyp/nvhe/pkvm.c
@@ -9,7 +9,6 @@
 
 #include <asm/kvm_emulate.h>
 
-#include <nvhe/fixed_config.h>
 #include <nvhe/mem_protect.h>
 #include <nvhe/memory.h>
 #include <nvhe/pkvm.h>
@@ -24,232 +23,168 @@ unsigned int kvm_arm_vmid_bits;
 unsigned int kvm_host_sve_max_vl;
 
 /*
- * Set trap register values based on features in ID_AA64PFR0.
+ * The currently loaded hyp vCPU for each physical CPU. Used in protected mode
+ * for both protected and non-protected VMs.
  */
-static void pvm_init_traps_aa64pfr0(struct kvm_vcpu *vcpu)
-{
-	const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64PFR0_EL1);
-	u64 hcr_set = HCR_RW;
-	u64 hcr_clear = 0;
-	u64 cptr_set = 0;
-	u64 cptr_clear = 0;
-
-	/* Protected KVM does not support AArch32 guests. */
-	BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL0),
-		PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) != ID_AA64PFR0_EL1_EL0_IMP);
-	BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL1),
-		PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) != ID_AA64PFR0_EL1_EL1_IMP);
+static DEFINE_PER_CPU(struct pkvm_hyp_vcpu *, loaded_hyp_vcpu);
 
-	/*
-	 * Linux guests assume support for floating-point and Advanced SIMD. Do
-	 * not change the trapping behavior for these from the KVM default.
-	 */
-	BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_FP),
-				PVM_ID_AA64PFR0_ALLOW));
-	BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AdvSIMD),
-				PVM_ID_AA64PFR0_ALLOW));
+static void pkvm_vcpu_reset_hcr(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS;
 
 	if (has_hvhe())
-		hcr_set |= HCR_E2H;
+		vcpu->arch.hcr_el2 |= HCR_E2H;
 
-	/* Trap RAS unless all current versions are supported */
-	if (FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_RAS), feature_ids) <
-	    ID_AA64PFR0_EL1_RAS_V1P1) {
-		hcr_set |= HCR_TERR | HCR_TEA;
-		hcr_clear |= HCR_FIEN;
+	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN)) {
+		/* route synchronous external abort exceptions to EL2 */
+		vcpu->arch.hcr_el2 |= HCR_TEA;
+		/* trap error record accesses */
+		vcpu->arch.hcr_el2 |= HCR_TERR;
 	}
 
-	/* Trap AMU */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AMU), feature_ids)) {
-		hcr_clear |= HCR_AMVOFFEN;
-		cptr_set |= CPTR_EL2_TAM;
-	}
+	if (cpus_have_final_cap(ARM64_HAS_STAGE2_FWB))
+		vcpu->arch.hcr_el2 |= HCR_FWB;
 
-	/* Trap SVE */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_SVE), feature_ids)) {
-		if (has_hvhe())
-			cptr_clear |= CPACR_ELx_ZEN;
-		else
-			cptr_set |= CPTR_EL2_TZ;
-	}
+	if (cpus_have_final_cap(ARM64_HAS_EVT) &&
+	    !cpus_have_final_cap(ARM64_MISMATCHED_CACHE_TYPE) &&
+	    kvm_read_vm_id_reg(vcpu->kvm, SYS_CTR_EL0) == read_cpuid(CTR_EL0))
+		vcpu->arch.hcr_el2 |= HCR_TID4;
+	else
+		vcpu->arch.hcr_el2 |= HCR_TID2;
 
-	vcpu->arch.hcr_el2 |= hcr_set;
-	vcpu->arch.hcr_el2 &= ~hcr_clear;
-	vcpu->arch.cptr_el2 |= cptr_set;
-	vcpu->arch.cptr_el2 &= ~cptr_clear;
+	if (vcpu_has_ptrauth(vcpu))
+		vcpu->arch.hcr_el2 |= (HCR_API | HCR_APK);
+
+	if (kvm_has_mte(vcpu->kvm))
+		vcpu->arch.hcr_el2 |= HCR_ATA;
 }
 
-/*
- * Set trap register values based on features in ID_AA64PFR1.
- */
-static void pvm_init_traps_aa64pfr1(struct kvm_vcpu *vcpu)
+static void pvm_init_traps_hcr(struct kvm_vcpu *vcpu)
 {
-	const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64PFR1_EL1);
-	u64 hcr_set = 0;
-	u64 hcr_clear = 0;
+	struct kvm *kvm = vcpu->kvm;
+	u64 val = vcpu->arch.hcr_el2;
 
-	/* Memory Tagging: Trap and Treat as Untagged if not supported. */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE), feature_ids)) {
-		hcr_set |= HCR_TID5;
-		hcr_clear |= HCR_DCT | HCR_ATA;
+	/* No support for AArch32. */
+	val |= HCR_RW;
+
+	/*
+	 * Always trap:
+	 * - Feature id registers: to control features exposed to guests
+	 * - Implementation-defined features
+	 */
+	val |= HCR_TACR | HCR_TIDCP | HCR_TID3 | HCR_TID1;
+
+	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, IMP)) {
+		val |= HCR_TERR | HCR_TEA;
+		val &= ~(HCR_FIEN);
 	}
 
-	vcpu->arch.hcr_el2 |= hcr_set;
-	vcpu->arch.hcr_el2 &= ~hcr_clear;
-}
+	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, AMU, IMP))
+		val &= ~(HCR_AMVOFFEN);
 
-/*
- * Set trap register values based on features in ID_AA64DFR0.
- */
-static void pvm_init_traps_aa64dfr0(struct kvm_vcpu *vcpu)
-{
-	const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64DFR0_EL1);
-	u64 mdcr_set = 0;
-	u64 mdcr_clear = 0;
-	u64 cptr_set = 0;
-
-	/* Trap/constrain PMU */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), feature_ids)) {
-		mdcr_set |= MDCR_EL2_TPM | MDCR_EL2_TPMCR;
-		mdcr_clear |= MDCR_EL2_HPME | MDCR_EL2_MTPME |
-			      MDCR_EL2_HPMN_MASK;
+	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, MTE, IMP)) {
+		val |= HCR_TID5;
+		val &= ~(HCR_DCT | HCR_ATA);
 	}
 
-	/* Trap Debug */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DebugVer), feature_ids))
-		mdcr_set |= MDCR_EL2_TDRA | MDCR_EL2_TDA | MDCR_EL2_TDE;
+	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, LO, IMP))
+		val |= HCR_TLOR;
 
-	/* Trap OS Double Lock */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DoubleLock), feature_ids))
-		mdcr_set |= MDCR_EL2_TDOSA;
+	vcpu->arch.hcr_el2 = val;
+}
 
-	/* Trap SPE */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMSVer), feature_ids)) {
-		mdcr_set |= MDCR_EL2_TPMS;
-		mdcr_clear |= MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT;
+static void pvm_init_traps_mdcr(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+	u64 val = vcpu->arch.mdcr_el2;
+
+	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMUVer, IMP)) {
+		val |= MDCR_EL2_TPM | MDCR_EL2_TPMCR;
+		val &= ~(MDCR_EL2_HPME | MDCR_EL2_MTPME | MDCR_EL2_HPMN_MASK);
 	}
 
-	/* Trap Trace Filter */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_TraceFilt), feature_ids))
-		mdcr_set |= MDCR_EL2_TTRF;
+	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, DebugVer, IMP))
+		val |= MDCR_EL2_TDRA | MDCR_EL2_TDA;
 
-	/* Trap Trace */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_TraceVer), feature_ids)) {
-		if (has_hvhe())
-			cptr_set |= CPACR_EL1_TTA;
-		else
-			cptr_set |= CPTR_EL2_TTA;
-	}
+	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, DoubleLock, IMP))
+		val |= MDCR_EL2_TDOSA;
 
-	/* Trap External Trace */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_ExtTrcBuff), feature_ids))
-		mdcr_clear |= MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT;
+	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMSVer, IMP)) {
+		val |= MDCR_EL2_TPMS;
+		val &= ~MDCR_EL2_E2PB_MASK;
+	}
 
-	vcpu->arch.mdcr_el2 |= mdcr_set;
-	vcpu->arch.mdcr_el2 &= ~mdcr_clear;
-	vcpu->arch.cptr_el2 |= cptr_set;
-}
+	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceFilt, IMP))
+		val |= MDCR_EL2_TTRF;
 
-/*
- * Set trap register values based on features in ID_AA64MMFR0.
- */
-static void pvm_init_traps_aa64mmfr0(struct kvm_vcpu *vcpu)
-{
-	const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64MMFR0_EL1);
-	u64 mdcr_set = 0;
+	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, ExtTrcBuff, IMP))
+		val |= MDCR_EL2_E2TB_MASK;
 
 	/* Trap Debug Communications Channel registers */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_FGT), feature_ids))
-		mdcr_set |= MDCR_EL2_TDCC;
+	if (!kvm_has_feat(kvm, ID_AA64MMFR0_EL1, FGT, IMP))
+		val |= MDCR_EL2_TDCC;
 
-	vcpu->arch.mdcr_el2 |= mdcr_set;
+	vcpu->arch.mdcr_el2 = val;
 }
 
 /*
- * Set trap register values based on features in ID_AA64MMFR1.
+ * Check that cpu features that are neither trapped nor supported are not
+ * enabled for protected VMs.
  */
-static void pvm_init_traps_aa64mmfr1(struct kvm_vcpu *vcpu)
+static int pkvm_check_pvm_cpu_features(struct kvm_vcpu *vcpu)
 {
-	const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64MMFR1_EL1);
-	u64 hcr_set = 0;
+	struct kvm *kvm = vcpu->kvm;
 
-	/* Trap LOR */
-	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_LO), feature_ids))
-		hcr_set |= HCR_TLOR;
-
-	vcpu->arch.hcr_el2 |= hcr_set;
-}
-
-/*
- * Set baseline trap register values.
- */
-static void pvm_init_trap_regs(struct kvm_vcpu *vcpu)
-{
-	const u64 hcr_trap_feat_regs = HCR_TID3;
-	const u64 hcr_trap_impdef = HCR_TACR | HCR_TIDCP | HCR_TID1;
+	/* No AArch32 support for protected guests. */
+	if (kvm_has_feat(kvm, ID_AA64PFR0_EL1, EL0, AARCH32) ||
+	    kvm_has_feat(kvm, ID_AA64PFR0_EL1, EL1, AARCH32))
+		return -EINVAL;
 
 	/*
-	 * Always trap:
-	 * - Feature id registers: to control features exposed to guests
-	 * - Implementation-defined features
+	 * Linux guests assume support for floating-point and Advanced SIMD. Do
+	 * not change the trapping behavior for these from the KVM default.
 	 */
-	vcpu->arch.hcr_el2 |= hcr_trap_feat_regs | hcr_trap_impdef;
-
-	/* Clear res0 and set res1 bits to trap potential new features. */
-	vcpu->arch.hcr_el2 &= ~(HCR_RES0);
-	vcpu->arch.mdcr_el2 &= ~(MDCR_EL2_RES0);
-	if (!has_hvhe()) {
-		vcpu->arch.cptr_el2 |= CPTR_NVHE_EL2_RES1;
-		vcpu->arch.cptr_el2 &= ~(CPTR_NVHE_EL2_RES0);
-	}
-}
-
-static void pkvm_vcpu_reset_hcr(struct kvm_vcpu *vcpu)
-{
-	vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS;
-
-	if (has_hvhe())
-		vcpu->arch.hcr_el2 |= HCR_E2H;
-
-	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN)) {
-		/* route synchronous external abort exceptions to EL2 */
-		vcpu->arch.hcr_el2 |= HCR_TEA;
-		/* trap error record accesses */
-		vcpu->arch.hcr_el2 |= HCR_TERR;
-	}
-
-	if (cpus_have_final_cap(ARM64_HAS_STAGE2_FWB))
-		vcpu->arch.hcr_el2 |= HCR_FWB;
+	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, FP, IMP) ||
+	    !kvm_has_feat(kvm, ID_AA64PFR0_EL1, AdvSIMD, IMP))
+		return -EINVAL;
 
-	if (cpus_have_final_cap(ARM64_HAS_EVT) &&
-	    !cpus_have_final_cap(ARM64_MISMATCHED_CACHE_TYPE))
-		vcpu->arch.hcr_el2 |= HCR_TID4;
-	else
-		vcpu->arch.hcr_el2 |= HCR_TID2;
+	/* No SME support in KVM right now. Check to catch if it changes. */
+	if (kvm_has_feat(kvm, ID_AA64PFR1_EL1, SME, IMP))
+		return -EINVAL;
 
-	if (vcpu_has_ptrauth(vcpu))
-		vcpu->arch.hcr_el2 |= (HCR_API | HCR_APK);
+	return 0;
 }
 
 /*
  * Initialize trap register values in protected mode.
  */
-static void pkvm_vcpu_init_traps(struct kvm_vcpu *vcpu)
+static int pkvm_vcpu_init_traps(struct pkvm_hyp_vcpu *hyp_vcpu)
 {
-	vcpu->arch.cptr_el2 = kvm_get_reset_cptr_el2(vcpu);
+	struct kvm_vcpu *vcpu = &hyp_vcpu->vcpu;
+	int ret;
+
 	vcpu->arch.mdcr_el2 = 0;
 
 	pkvm_vcpu_reset_hcr(vcpu);
 
-	if ((!vcpu_is_protected(vcpu)))
-		return;
+	if ((!pkvm_hyp_vcpu_is_protected(hyp_vcpu))) {
+		struct kvm_vcpu *host_vcpu = hyp_vcpu->host_vcpu;
+
+		/* Trust the host for non-protected vcpu features. */
+		vcpu->arch.hcrx_el2 = host_vcpu->arch.hcrx_el2;
+		memcpy(vcpu->arch.fgt, host_vcpu->arch.fgt, sizeof(vcpu->arch.fgt));
+		return 0;
+	}
 
-	pvm_init_trap_regs(vcpu);
-	pvm_init_traps_aa64pfr0(vcpu);
-	pvm_init_traps_aa64pfr1(vcpu);
-	pvm_init_traps_aa64dfr0(vcpu);
-	pvm_init_traps_aa64mmfr0(vcpu);
-	pvm_init_traps_aa64mmfr1(vcpu);
+	ret = pkvm_check_pvm_cpu_features(vcpu);
+	if (ret)
+		return ret;
+
+	pvm_init_traps_hcr(vcpu);
+	pvm_init_traps_mdcr(vcpu);
+	vcpu_set_hcrx(vcpu);
+
+	return 0;
 }
 
 /*
@@ -258,6 +193,11 @@ static void pkvm_vcpu_init_traps(struct kvm_vcpu *vcpu)
  */
 #define HANDLE_OFFSET 0x1000
 
+/*
+ * Marks a reserved but not yet used entry in the VM table.
+ */
+#define RESERVED_ENTRY ((void *)0xa110ca7ed)
+
 static unsigned int vm_handle_to_idx(pkvm_handle_t handle)
 {
 	return handle - HANDLE_OFFSET;
@@ -270,14 +210,14 @@ static pkvm_handle_t idx_to_vm_handle(unsigned int idx)
 
 /*
  * Spinlock for protecting state related to the VM table. Protects writes
- * to 'vm_table' and 'nr_table_entries' as well as reads and writes to
- * 'last_hyp_vcpu_lookup'.
+ * to 'vm_table', 'nr_table_entries', and other per-vm state on initialization.
+ * Also protects reads and writes to 'last_hyp_vcpu_lookup'.
  */
-static DEFINE_HYP_SPINLOCK(vm_table_lock);
+DEFINE_HYP_SPINLOCK(vm_table_lock);
 
 /*
- * The table of VM entries for protected VMs in hyp.
- * Allocated at hyp initialization and setup.
+ * A table that tracks all VMs in protected mode.
+ * Allocated during hyp initialization and setup.
  */
 static struct pkvm_hyp_vm **vm_table;
 
@@ -297,6 +237,10 @@ static struct pkvm_hyp_vm *get_vm_by_handle(pkvm_handle_t handle)
 	if (unlikely(idx >= KVM_MAX_PVMS))
 		return NULL;
 
+	/* A reserved entry doesn't represent an initialized VM. */
+	if (unlikely(vm_table[idx] == RESERVED_ENTRY))
+		return NULL;
+
 	return vm_table[idx];
 }
 
@@ -306,15 +250,32 @@ struct pkvm_hyp_vcpu *pkvm_load_hyp_vcpu(pkvm_handle_t handle,
 	struct pkvm_hyp_vcpu *hyp_vcpu = NULL;
 	struct pkvm_hyp_vm *hyp_vm;
 
+	/* Cannot load a new vcpu without putting the old one first. */
+	if (__this_cpu_read(loaded_hyp_vcpu))
+		return NULL;
+
 	hyp_spin_lock(&vm_table_lock);
 	hyp_vm = get_vm_by_handle(handle);
-	if (!hyp_vm || hyp_vm->nr_vcpus <= vcpu_idx)
+	if (!hyp_vm || hyp_vm->kvm.created_vcpus <= vcpu_idx)
 		goto unlock;
 
 	hyp_vcpu = hyp_vm->vcpus[vcpu_idx];
+	if (!hyp_vcpu)
+		goto unlock;
+
+	/* Ensure vcpu isn't loaded on more than one cpu simultaneously. */
+	if (unlikely(hyp_vcpu->loaded_hyp_vcpu)) {
+		hyp_vcpu = NULL;
+		goto unlock;
+	}
+
+	hyp_vcpu->loaded_hyp_vcpu = this_cpu_ptr(&loaded_hyp_vcpu);
 	hyp_page_ref_inc(hyp_virt_to_page(hyp_vm));
 unlock:
 	hyp_spin_unlock(&vm_table_lock);
+
+	if (hyp_vcpu)
+		__this_cpu_write(loaded_hyp_vcpu, hyp_vcpu);
 	return hyp_vcpu;
 }
 
@@ -323,139 +284,228 @@ void pkvm_put_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu)
 	struct pkvm_hyp_vm *hyp_vm = pkvm_hyp_vcpu_to_hyp_vm(hyp_vcpu);
 
 	hyp_spin_lock(&vm_table_lock);
+	hyp_vcpu->loaded_hyp_vcpu = NULL;
+	__this_cpu_write(loaded_hyp_vcpu, NULL);
+	hyp_page_ref_dec(hyp_virt_to_page(hyp_vm));
+	hyp_spin_unlock(&vm_table_lock);
+}
+
+struct pkvm_hyp_vcpu *pkvm_get_loaded_hyp_vcpu(void)
+{
+	return __this_cpu_read(loaded_hyp_vcpu);
+
+}
+
+struct pkvm_hyp_vm *get_pkvm_hyp_vm(pkvm_handle_t handle)
+{
+	struct pkvm_hyp_vm *hyp_vm;
+
+	hyp_spin_lock(&vm_table_lock);
+	hyp_vm = get_vm_by_handle(handle);
+	if (hyp_vm)
+		hyp_page_ref_inc(hyp_virt_to_page(hyp_vm));
+	hyp_spin_unlock(&vm_table_lock);
+
+	return hyp_vm;
+}
+
+void put_pkvm_hyp_vm(struct pkvm_hyp_vm *hyp_vm)
+{
+	hyp_spin_lock(&vm_table_lock);
 	hyp_page_ref_dec(hyp_virt_to_page(hyp_vm));
 	hyp_spin_unlock(&vm_table_lock);
 }
 
+struct pkvm_hyp_vm *get_np_pkvm_hyp_vm(pkvm_handle_t handle)
+{
+	struct pkvm_hyp_vm *hyp_vm = get_pkvm_hyp_vm(handle);
+
+	if (hyp_vm && pkvm_hyp_vm_is_protected(hyp_vm)) {
+		put_pkvm_hyp_vm(hyp_vm);
+		hyp_vm = NULL;
+	}
+
+	return hyp_vm;
+}
+
 static void pkvm_init_features_from_host(struct pkvm_hyp_vm *hyp_vm, const struct kvm *host_kvm)
 {
 	struct kvm *kvm = &hyp_vm->kvm;
+	unsigned long host_arch_flags = READ_ONCE(host_kvm->arch.flags);
 	DECLARE_BITMAP(allowed_features, KVM_VCPU_MAX_FEATURES);
 
+	/* CTR_EL0 is always under host control, even for protected VMs. */
+	hyp_vm->kvm.arch.ctr_el0 = host_kvm->arch.ctr_el0;
+
+	/* Preserve the vgic model so that GICv3 emulation works */
+	hyp_vm->kvm.arch.vgic.vgic_model = host_kvm->arch.vgic.vgic_model;
+
+	if (test_bit(KVM_ARCH_FLAG_MTE_ENABLED, &host_kvm->arch.flags))
+		set_bit(KVM_ARCH_FLAG_MTE_ENABLED, &kvm->arch.flags);
+
 	/* No restrictions for non-protected VMs. */
 	if (!kvm_vm_is_protected(kvm)) {
+		hyp_vm->kvm.arch.flags = host_arch_flags;
+
 		bitmap_copy(kvm->arch.vcpu_features,
 			    host_kvm->arch.vcpu_features,
 			    KVM_VCPU_MAX_FEATURES);
+
+		if (test_bit(KVM_ARCH_FLAG_WRITABLE_IMP_ID_REGS, &host_arch_flags))
+			hyp_vm->kvm.arch.midr_el1 = host_kvm->arch.midr_el1;
+
 		return;
 	}
 
 	bitmap_zero(allowed_features, KVM_VCPU_MAX_FEATURES);
 
-	/*
-	 * For protected VMs, always allow:
-	 * - CPU starting in poweroff state
-	 * - PSCI v0.2
-	 */
-	set_bit(KVM_ARM_VCPU_POWER_OFF, allowed_features);
 	set_bit(KVM_ARM_VCPU_PSCI_0_2, allowed_features);
 
-	/*
-	 * Check if remaining features are allowed:
-	 * - Performance Monitoring
-	 * - Scalable Vectors
-	 * - Pointer Authentication
-	 */
-	if (FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), PVM_ID_AA64DFR0_ALLOW))
+	if (kvm_pvm_ext_allowed(KVM_CAP_ARM_PMU_V3))
 		set_bit(KVM_ARM_VCPU_PMU_V3, allowed_features);
 
-	if (FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_SVE), PVM_ID_AA64PFR0_ALLOW))
-		set_bit(KVM_ARM_VCPU_SVE, allowed_features);
-
-	if (FIELD_GET(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API), PVM_ID_AA64ISAR1_RESTRICT_UNSIGNED) &&
-	    FIELD_GET(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA), PVM_ID_AA64ISAR1_RESTRICT_UNSIGNED))
+	if (kvm_pvm_ext_allowed(KVM_CAP_ARM_PTRAUTH_ADDRESS))
 		set_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, allowed_features);
 
-	if (FIELD_GET(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI), PVM_ID_AA64ISAR1_ALLOW) &&
-	    FIELD_GET(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA), PVM_ID_AA64ISAR1_ALLOW))
+	if (kvm_pvm_ext_allowed(KVM_CAP_ARM_PTRAUTH_GENERIC))
 		set_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, allowed_features);
 
+	if (kvm_pvm_ext_allowed(KVM_CAP_ARM_SVE)) {
+		set_bit(KVM_ARM_VCPU_SVE, allowed_features);
+		kvm->arch.flags |= host_arch_flags & BIT(KVM_ARCH_FLAG_GUEST_HAS_SVE);
+	}
+
 	bitmap_and(kvm->arch.vcpu_features, host_kvm->arch.vcpu_features,
 		   allowed_features, KVM_VCPU_MAX_FEATURES);
 }
 
-static void pkvm_vcpu_init_ptrauth(struct pkvm_hyp_vcpu *hyp_vcpu)
-{
-	struct kvm_vcpu *vcpu = &hyp_vcpu->vcpu;
-
-	if (vcpu_has_feature(vcpu, KVM_ARM_VCPU_PTRAUTH_ADDRESS) ||
-	    vcpu_has_feature(vcpu, KVM_ARM_VCPU_PTRAUTH_GENERIC)) {
-		kvm_vcpu_enable_ptrauth(vcpu);
-	} else {
-		vcpu_clear_flag(&hyp_vcpu->vcpu, GUEST_HAS_PTRAUTH);
-	}
-}
-
 static void unpin_host_vcpu(struct kvm_vcpu *host_vcpu)
 {
 	if (host_vcpu)
 		hyp_unpin_shared_mem(host_vcpu, host_vcpu + 1);
 }
 
+static void unpin_host_sve_state(struct pkvm_hyp_vcpu *hyp_vcpu)
+{
+	void *sve_state;
+
+	if (!vcpu_has_feature(&hyp_vcpu->vcpu, KVM_ARM_VCPU_SVE))
+		return;
+
+	sve_state = kern_hyp_va(hyp_vcpu->vcpu.arch.sve_state);
+	hyp_unpin_shared_mem(sve_state,
+			     sve_state + vcpu_sve_state_size(&hyp_vcpu->vcpu));
+}
+
 static void unpin_host_vcpus(struct pkvm_hyp_vcpu *hyp_vcpus[],
 			     unsigned int nr_vcpus)
 {
 	int i;
 
-	for (i = 0; i < nr_vcpus; i++)
-		unpin_host_vcpu(hyp_vcpus[i]->host_vcpu);
+	for (i = 0; i < nr_vcpus; i++) {
+		struct pkvm_hyp_vcpu *hyp_vcpu = hyp_vcpus[i];
+
+		if (!hyp_vcpu)
+			continue;
+
+		unpin_host_vcpu(hyp_vcpu->host_vcpu);
+		unpin_host_sve_state(hyp_vcpu);
+	}
 }
 
 static void init_pkvm_hyp_vm(struct kvm *host_kvm, struct pkvm_hyp_vm *hyp_vm,
-			     unsigned int nr_vcpus)
+			     unsigned int nr_vcpus, pkvm_handle_t handle)
 {
+	struct kvm_s2_mmu *mmu = &hyp_vm->kvm.arch.mmu;
+	int idx = vm_handle_to_idx(handle);
+
+	hyp_vm->kvm.arch.pkvm.handle = handle;
+
 	hyp_vm->host_kvm = host_kvm;
 	hyp_vm->kvm.created_vcpus = nr_vcpus;
-	hyp_vm->kvm.arch.mmu.vtcr = host_mmu.arch.mmu.vtcr;
-	hyp_vm->kvm.arch.pkvm.enabled = READ_ONCE(host_kvm->arch.pkvm.enabled);
+	hyp_vm->kvm.arch.pkvm.is_protected = READ_ONCE(host_kvm->arch.pkvm.is_protected);
+	hyp_vm->kvm.arch.pkvm.is_created = true;
+	hyp_vm->kvm.arch.flags = 0;
 	pkvm_init_features_from_host(hyp_vm, host_kvm);
+
+	/* VMID 0 is reserved for the host */
+	atomic64_set(&mmu->vmid.id, idx + 1);
+
+	mmu->vtcr = host_mmu.arch.mmu.vtcr;
+	mmu->arch = &hyp_vm->kvm.arch;
+	mmu->pgt = &hyp_vm->pgt;
 }
 
-static void pkvm_vcpu_init_sve(struct pkvm_hyp_vcpu *hyp_vcpu, struct kvm_vcpu *host_vcpu)
+static int pkvm_vcpu_init_sve(struct pkvm_hyp_vcpu *hyp_vcpu, struct kvm_vcpu *host_vcpu)
 {
 	struct kvm_vcpu *vcpu = &hyp_vcpu->vcpu;
+	unsigned int sve_max_vl;
+	size_t sve_state_size;
+	void *sve_state;
+	int ret = 0;
 
 	if (!vcpu_has_feature(vcpu, KVM_ARM_VCPU_SVE)) {
-		vcpu_clear_flag(vcpu, GUEST_HAS_SVE);
 		vcpu_clear_flag(vcpu, VCPU_SVE_FINALIZED);
+		return 0;
 	}
+
+	/* Limit guest vector length to the maximum supported by the host. */
+	sve_max_vl = min(READ_ONCE(host_vcpu->arch.sve_max_vl), kvm_host_sve_max_vl);
+	sve_state_size = sve_state_size_from_vl(sve_max_vl);
+	sve_state = kern_hyp_va(READ_ONCE(host_vcpu->arch.sve_state));
+
+	if (!sve_state || !sve_state_size) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = hyp_pin_shared_mem(sve_state, sve_state + sve_state_size);
+	if (ret)
+		goto err;
+
+	vcpu->arch.sve_state = sve_state;
+	vcpu->arch.sve_max_vl = sve_max_vl;
+
+	return 0;
+err:
+	clear_bit(KVM_ARM_VCPU_SVE, vcpu->kvm->arch.vcpu_features);
+	return ret;
 }
 
 static int init_pkvm_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu,
 			      struct pkvm_hyp_vm *hyp_vm,
-			      struct kvm_vcpu *host_vcpu,
-			      unsigned int vcpu_idx)
+			      struct kvm_vcpu *host_vcpu)
 {
 	int ret = 0;
 
 	if (hyp_pin_shared_mem(host_vcpu, host_vcpu + 1))
 		return -EBUSY;
 
-	if (host_vcpu->vcpu_idx != vcpu_idx) {
-		ret = -EINVAL;
-		goto done;
-	}
-
 	hyp_vcpu->host_vcpu = host_vcpu;
 
 	hyp_vcpu->vcpu.kvm = &hyp_vm->kvm;
 	hyp_vcpu->vcpu.vcpu_id = READ_ONCE(host_vcpu->vcpu_id);
-	hyp_vcpu->vcpu.vcpu_idx = vcpu_idx;
+	hyp_vcpu->vcpu.vcpu_idx = READ_ONCE(host_vcpu->vcpu_idx);
 
 	hyp_vcpu->vcpu.arch.hw_mmu = &hyp_vm->kvm.arch.mmu;
 	hyp_vcpu->vcpu.arch.cflags = READ_ONCE(host_vcpu->arch.cflags);
 	hyp_vcpu->vcpu.arch.mp_state.mp_state = KVM_MP_STATE_STOPPED;
 
-	pkvm_vcpu_init_sve(hyp_vcpu, host_vcpu);
-	pkvm_vcpu_init_ptrauth(hyp_vcpu);
-	pkvm_vcpu_init_traps(&hyp_vcpu->vcpu);
+	if (pkvm_hyp_vcpu_is_protected(hyp_vcpu))
+		kvm_init_pvm_id_regs(&hyp_vcpu->vcpu);
+
+	ret = pkvm_vcpu_init_traps(hyp_vcpu);
+	if (ret)
+		goto done;
+
+	ret = pkvm_vcpu_init_sve(hyp_vcpu, host_vcpu);
 done:
 	if (ret)
 		unpin_host_vcpu(host_vcpu);
 	return ret;
 }
 
-static int find_free_vm_table_entry(struct kvm *host_kvm)
+static int find_free_vm_table_entry(void)
 {
 	int i;
 
@@ -468,15 +518,13 @@ static int find_free_vm_table_entry(struct kvm *host_kvm)
 }
 
 /*
- * Allocate a VM table entry and insert a pointer to the new vm.
+ * Reserve a VM table entry.
  *
- * Return a unique handle to the protected VM on success,
+ * Return a unique handle to the VM on success,
  * negative error code on failure.
  */
-static pkvm_handle_t insert_vm_table_entry(struct kvm *host_kvm,
-					   struct pkvm_hyp_vm *hyp_vm)
+static int allocate_vm_table_entry(void)
 {
-	struct kvm_s2_mmu *mmu = &hyp_vm->kvm.arch.mmu;
 	int idx;
 
 	hyp_assert_lock_held(&vm_table_lock);
@@ -489,20 +537,57 @@ static pkvm_handle_t insert_vm_table_entry(struct kvm *host_kvm,
 	if (unlikely(!vm_table))
 		return -EINVAL;
 
-	idx = find_free_vm_table_entry(host_kvm);
-	if (idx < 0)
+	idx = find_free_vm_table_entry();
+	if (unlikely(idx < 0))
 		return idx;
 
-	hyp_vm->kvm.arch.pkvm.handle = idx_to_vm_handle(idx);
+	vm_table[idx] = RESERVED_ENTRY;
 
-	/* VMID 0 is reserved for the host */
-	atomic64_set(&mmu->vmid.id, idx + 1);
+	return idx;
+}
 
-	mmu->arch = &hyp_vm->kvm.arch;
-	mmu->pgt = &hyp_vm->pgt;
+static int __insert_vm_table_entry(pkvm_handle_t handle,
+				   struct pkvm_hyp_vm *hyp_vm)
+{
+	unsigned int idx;
+
+	hyp_assert_lock_held(&vm_table_lock);
+
+	/*
+	 * Initializing protected state might have failed, yet a malicious
+	 * host could trigger this function. Thus, ensure that 'vm_table'
+	 * exists.
+	 */
+	if (unlikely(!vm_table))
+		return -EINVAL;
+
+	idx = vm_handle_to_idx(handle);
+	if (unlikely(idx >= KVM_MAX_PVMS))
+		return -EINVAL;
+
+	if (unlikely(vm_table[idx] != RESERVED_ENTRY))
+		return -EINVAL;
 
 	vm_table[idx] = hyp_vm;
-	return hyp_vm->kvm.arch.pkvm.handle;
+
+	return 0;
+}
+
+/*
+ * Insert a pointer to the initialized VM into the VM table.
+ *
+ * Return 0 on success, or negative error code on failure.
+ */
+static int insert_vm_table_entry(pkvm_handle_t handle,
+				 struct pkvm_hyp_vm *hyp_vm)
+{
+	int ret;
+
+	hyp_spin_lock(&vm_table_lock);
+	ret = __insert_vm_table_entry(handle, hyp_vm);
+	hyp_spin_unlock(&vm_table_lock);
+
+	return ret;
 }
 
 /*
@@ -569,10 +654,45 @@ static void unmap_donated_memory_noclear(void *va, size_t size)
 }
 
 /*
- * Initialize the hypervisor copy of the protected VM state using the
- * memory donated by the host.
+ * Reserves an entry in the hypervisor for a new VM in protected mode.
  *
- * Unmaps the donated memory from the host at stage 2.
+ * Return a unique handle to the VM on success, negative error code on failure.
+ */
+int __pkvm_reserve_vm(void)
+{
+	int ret;
+
+	hyp_spin_lock(&vm_table_lock);
+	ret = allocate_vm_table_entry();
+	hyp_spin_unlock(&vm_table_lock);
+
+	if (ret < 0)
+		return ret;
+
+	return idx_to_vm_handle(ret);
+}
+
+/*
+ * Removes a reserved entry, but only if is hasn't been used yet.
+ * Otherwise, the VM needs to be destroyed.
+ */
+void __pkvm_unreserve_vm(pkvm_handle_t handle)
+{
+	unsigned int idx = vm_handle_to_idx(handle);
+
+	if (unlikely(!vm_table))
+		return;
+
+	hyp_spin_lock(&vm_table_lock);
+	if (likely(idx < KVM_MAX_PVMS && vm_table[idx] == RESERVED_ENTRY))
+		remove_vm_table_entry(handle);
+	hyp_spin_unlock(&vm_table_lock);
+}
+
+/*
+ * Initialize the hypervisor copy of the VM state using host-donated memory.
+ *
+ * Unmap the donated memory from the host at stage 2.
  *
  * host_kvm: A pointer to the host's struct kvm.
  * vm_hva: The host va of the area being donated for the VM state.
@@ -581,8 +701,7 @@ static void unmap_donated_memory_noclear(void *va, size_t size)
  *	    the VM. Must be page aligned. Its size is implied by the VM's
  *	    VTCR.
  *
- * Return a unique handle to the protected VM on success,
- * negative error code on failure.
+ * Return 0 success, negative error code on failure.
  */
 int __pkvm_init_vm(struct kvm *host_kvm, unsigned long vm_hva,
 		   unsigned long pgd_hva)
@@ -590,6 +709,7 @@ int __pkvm_init_vm(struct kvm *host_kvm, unsigned long vm_hva,
 	struct pkvm_hyp_vm *hyp_vm = NULL;
 	size_t vm_size, pgd_size;
 	unsigned int nr_vcpus;
+	pkvm_handle_t handle;
 	void *pgd = NULL;
 	int ret;
 
@@ -603,6 +723,12 @@ int __pkvm_init_vm(struct kvm *host_kvm, unsigned long vm_hva,
 		goto err_unpin_kvm;
 	}
 
+	handle = READ_ONCE(host_kvm->arch.pkvm.handle);
+	if (unlikely(handle < HANDLE_OFFSET)) {
+		ret = -EINVAL;
+		goto err_unpin_kvm;
+	}
+
 	vm_size = pkvm_get_hyp_vm_size(nr_vcpus);
 	pgd_size = kvm_pgtable_stage2_pgd_size(host_mmu.arch.mmu.vtcr);
 
@@ -616,24 +742,19 @@ int __pkvm_init_vm(struct kvm *host_kvm, unsigned long vm_hva,
 	if (!pgd)
 		goto err_remove_mappings;
 
-	init_pkvm_hyp_vm(host_kvm, hyp_vm, nr_vcpus);
-
-	hyp_spin_lock(&vm_table_lock);
-	ret = insert_vm_table_entry(host_kvm, hyp_vm);
-	if (ret < 0)
-		goto err_unlock;
+	init_pkvm_hyp_vm(host_kvm, hyp_vm, nr_vcpus, handle);
 
 	ret = kvm_guest_prepare_stage2(hyp_vm, pgd);
 	if (ret)
-		goto err_remove_vm_table_entry;
-	hyp_spin_unlock(&vm_table_lock);
+		goto err_remove_mappings;
 
-	return hyp_vm->kvm.arch.pkvm.handle;
+	/* Must be called last since this publishes the VM. */
+	ret = insert_vm_table_entry(handle, hyp_vm);
+	if (ret)
+		goto err_remove_mappings;
+
+	return 0;
 
-err_remove_vm_table_entry:
-	remove_vm_table_entry(hyp_vm->kvm.arch.pkvm.handle);
-err_unlock:
-	hyp_spin_unlock(&vm_table_lock);
 err_remove_mappings:
 	unmap_donated_memory(hyp_vm, vm_size);
 	unmap_donated_memory(pgd, pgd_size);
@@ -643,10 +764,9 @@ err_unpin_kvm:
 }
 
 /*
- * Initialize the hypervisor copy of the protected vCPU state using the
- * memory donated by the host.
+ * Initialize the hypervisor copy of the vCPU state using host-donated memory.
  *
- * handle: The handle for the protected vm.
+ * handle: The hypervisor handle for the vm.
  * host_vcpu: A pointer to the corresponding host vcpu.
  * vcpu_hva: The host va of the area being donated for the vcpu state.
  *	     Must be page aligned. The size of the area must be equal to
@@ -673,29 +793,28 @@ int __pkvm_init_vcpu(pkvm_handle_t handle, struct kvm_vcpu *host_vcpu,
 		goto unlock;
 	}
 
-	idx = hyp_vm->nr_vcpus;
+	ret = init_pkvm_hyp_vcpu(hyp_vcpu, hyp_vm, host_vcpu);
+	if (ret)
+		goto unlock;
+
+	idx = hyp_vcpu->vcpu.vcpu_idx;
 	if (idx >= hyp_vm->kvm.created_vcpus) {
 		ret = -EINVAL;
 		goto unlock;
 	}
 
-	ret = init_pkvm_hyp_vcpu(hyp_vcpu, hyp_vm, host_vcpu, idx);
-	if (ret)
+	if (hyp_vm->vcpus[idx]) {
+		ret = -EINVAL;
 		goto unlock;
+	}
 
 	hyp_vm->vcpus[idx] = hyp_vcpu;
-	hyp_vm->nr_vcpus++;
 unlock:
 	hyp_spin_unlock(&vm_table_lock);
 
-	if (ret) {
+	if (ret)
 		unmap_donated_memory(hyp_vcpu, sizeof(*hyp_vcpu));
-		return ret;
-	}
-
-	hyp_vcpu->vcpu.arch.cptr_el2 = kvm_get_reset_cptr_el2(&hyp_vcpu->vcpu);
-
-	return 0;
+	return ret;
 }
 
 static void
@@ -712,7 +831,7 @@ teardown_donated_memory(struct kvm_hyp_memcache *mc, void *addr, size_t size)
 
 int __pkvm_teardown_vm(pkvm_handle_t handle)
 {
-	struct kvm_hyp_memcache *mc;
+	struct kvm_hyp_memcache *mc, *stage2_mc;
 	struct pkvm_hyp_vm *hyp_vm;
 	struct kvm *host_kvm;
 	unsigned int idx;
@@ -740,12 +859,26 @@ int __pkvm_teardown_vm(pkvm_handle_t handle)
 
 	/* Reclaim guest pages (including page-table pages) */
 	mc = &host_kvm->arch.pkvm.teardown_mc;
-	reclaim_guest_pages(hyp_vm, mc);
-	unpin_host_vcpus(hyp_vm->vcpus, hyp_vm->nr_vcpus);
+	stage2_mc = &host_kvm->arch.pkvm.stage2_teardown_mc;
+	reclaim_pgtable_pages(hyp_vm, stage2_mc);
+	unpin_host_vcpus(hyp_vm->vcpus, hyp_vm->kvm.created_vcpus);
 
 	/* Push the metadata pages to the teardown memcache */
-	for (idx = 0; idx < hyp_vm->nr_vcpus; ++idx) {
+	for (idx = 0; idx < hyp_vm->kvm.created_vcpus; ++idx) {
 		struct pkvm_hyp_vcpu *hyp_vcpu = hyp_vm->vcpus[idx];
+		struct kvm_hyp_memcache *vcpu_mc;
+
+		if (!hyp_vcpu)
+			continue;
+
+		vcpu_mc = &hyp_vcpu->vcpu.arch.pkvm_memcache;
+
+		while (vcpu_mc->nr_pages) {
+			void *addr = pop_hyp_memcache(vcpu_mc, hyp_phys_to_virt);
+
+			push_hyp_memcache(stage2_mc, addr, hyp_virt_to_phys);
+			unmap_donated_memory_noclear(addr, PAGE_SIZE);
+		}
 
 		teardown_donated_memory(mc, hyp_vcpu, sizeof(*hyp_vcpu));
 	}
diff --git a/arch/arm64/kvm/hyp/nvhe/psci-relay.c b/arch/arm64/kvm/hyp/nvhe/psci-relay.c
index 9c2ce1e0e99a..c3e196fb8b18 100644
--- a/arch/arm64/kvm/hyp/nvhe/psci-relay.c
+++ b/arch/arm64/kvm/hyp/nvhe/psci-relay.c
@@ -218,6 +218,9 @@ asmlinkage void __noreturn __kvm_host_psci_cpu_entry(bool is_cpu_on)
 	if (is_cpu_on)
 		release_boot_args(boot_args);
 
+	write_sysreg_el1(INIT_SCTLR_EL1_MMU_OFF, SYS_SCTLR);
+	write_sysreg(INIT_PSTATE_EL1, SPSR_EL2);
+
 	__host_enter(host_ctxt);
 }
 
diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c
index cbdd18cd3f98..90bd014e952f 100644
--- a/arch/arm64/kvm/hyp/nvhe/setup.c
+++ b/arch/arm64/kvm/hyp/nvhe/setup.c
@@ -12,7 +12,6 @@
 
 #include <nvhe/early_alloc.h>
 #include <nvhe/ffa.h>
-#include <nvhe/fixed_config.h>
 #include <nvhe/gfp.h>
 #include <nvhe/memory.h>
 #include <nvhe/mem_protect.h>
@@ -29,6 +28,7 @@ static void *vmemmap_base;
 static void *vm_table_base;
 static void *hyp_pgt_base;
 static void *host_s2_pgt_base;
+static void *selftest_base;
 static void *ffa_proxy_pages;
 static struct kvm_pgtable_mm_ops pkvm_pgtable_mm_ops;
 static struct hyp_pool hpool;
@@ -39,6 +39,11 @@ static int divide_memory_pool(void *virt, unsigned long size)
 
 	hyp_early_alloc_init(virt, size);
 
+	nr_pages = pkvm_selftest_pages();
+	selftest_base = hyp_early_alloc_contig(nr_pages);
+	if (nr_pages && !selftest_base)
+		return -ENOMEM;
+
 	nr_pages = hyp_vmemmap_pages(sizeof(struct hyp_page));
 	vmemmap_base = hyp_early_alloc_contig(nr_pages);
 	if (!vmemmap_base)
@@ -120,6 +125,10 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size,
 	if (ret)
 		return ret;
 
+	ret = pkvm_create_mappings(__hyp_data_start, __hyp_data_end, PAGE_HYP);
+	if (ret)
+		return ret;
+
 	ret = pkvm_create_mappings(__hyp_rodata_start, __hyp_rodata_end, PAGE_HYP_RO);
 	if (ret)
 		return ret;
@@ -180,9 +189,10 @@ static void hpool_put_page(void *addr)
 static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx,
 				     enum kvm_pgtable_walk_flags visit)
 {
-	enum kvm_pgtable_prot prot;
 	enum pkvm_page_state state;
+	struct hyp_page *page;
 	phys_addr_t phys;
+	enum kvm_pgtable_prot prot;
 
 	if (!kvm_pte_valid(ctx->old))
 		return 0;
@@ -194,25 +204,38 @@ static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	if (!addr_is_memory(phys))
 		return -EINVAL;
 
+	page = hyp_phys_to_page(phys);
+
 	/*
 	 * Adjust the host stage-2 mappings to match the ownership attributes
-	 * configured in the hypervisor stage-1.
+	 * configured in the hypervisor stage-1, and make sure to propagate them
+	 * to the hyp_vmemmap state.
 	 */
-	state = pkvm_getstate(kvm_pgtable_hyp_pte_prot(ctx->old));
+	prot = kvm_pgtable_hyp_pte_prot(ctx->old);
+	state = pkvm_getstate(prot);
 	switch (state) {
 	case PKVM_PAGE_OWNED:
-		return host_stage2_set_owner_locked(phys, PAGE_SIZE, PKVM_ID_HYP);
+		set_hyp_state(page, PKVM_PAGE_OWNED);
+		/* hyp text is RO in the host stage-2 to be inspected on panic. */
+		if (prot == PAGE_HYP_EXEC) {
+			set_host_state(page, PKVM_NOPAGE);
+			return host_stage2_idmap_locked(phys, PAGE_SIZE, KVM_PGTABLE_PROT_R);
+		} else {
+			return host_stage2_set_owner_locked(phys, PAGE_SIZE, PKVM_ID_HYP);
+		}
 	case PKVM_PAGE_SHARED_OWNED:
-		prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, PKVM_PAGE_SHARED_BORROWED);
+		set_hyp_state(page, PKVM_PAGE_SHARED_OWNED);
+		set_host_state(page, PKVM_PAGE_SHARED_BORROWED);
 		break;
 	case PKVM_PAGE_SHARED_BORROWED:
-		prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, PKVM_PAGE_SHARED_OWNED);
+		set_hyp_state(page, PKVM_PAGE_SHARED_BORROWED);
+		set_host_state(page, PKVM_PAGE_SHARED_OWNED);
 		break;
 	default:
 		return -EINVAL;
 	}
 
-	return host_stage2_idmap_locked(phys, PAGE_SIZE, prot);
+	return 0;
 }
 
 static int fix_hyp_pgtable_refcnt_walker(const struct kvm_pgtable_visit_ctx *ctx,
@@ -297,7 +320,7 @@ void __noreturn __pkvm_init_finalise(void)
 	if (ret)
 		goto out;
 
-	ret = hyp_create_pcpu_fixmap();
+	ret = hyp_create_fixmap();
 	if (ret)
 		goto out;
 
@@ -306,6 +329,8 @@ void __noreturn __pkvm_init_finalise(void)
 		goto out;
 
 	pkvm_hyp_vm_table_init(vm_table_base);
+
+	pkvm_ownership_selftest(selftest_base);
 out:
 	/*
 	 * We tail-called to here from handle___pkvm_init() and will not return,
diff --git a/arch/arm64/kvm/hyp/nvhe/stacktrace.c b/arch/arm64/kvm/hyp/nvhe/stacktrace.c
index ed6b58b19cfa..5b6eeab1a774 100644
--- a/arch/arm64/kvm/hyp/nvhe/stacktrace.c
+++ b/arch/arm64/kvm/hyp/nvhe/stacktrace.c
@@ -28,7 +28,7 @@ static void hyp_prepare_backtrace(unsigned long fp, unsigned long pc)
 	struct kvm_nvhe_stacktrace_info *stacktrace_info = this_cpu_ptr(&kvm_stacktrace_info);
 	struct kvm_nvhe_init_params *params = this_cpu_ptr(&kvm_init_params);
 
-	stacktrace_info->stack_base = (unsigned long)(params->stack_hyp_va - PAGE_SIZE);
+	stacktrace_info->stack_base = (unsigned long)(params->stack_hyp_va - NVHE_STACK_SIZE);
 	stacktrace_info->overflow_stack_base = (unsigned long)this_cpu_ptr(overflow_stack);
 	stacktrace_info->fp = fp;
 	stacktrace_info->pc = pc;
@@ -54,7 +54,7 @@ static struct stack_info stackinfo_get_hyp(void)
 {
 	struct kvm_nvhe_init_params *params = this_cpu_ptr(&kvm_init_params);
 	unsigned long high = params->stack_hyp_va;
-	unsigned long low = high - PAGE_SIZE;
+	unsigned long low = high - NVHE_STACK_SIZE;
 
 	return (struct stack_info) {
 		.low = low,
diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c
index cc69106734ca..d3b9ec8a7c28 100644
--- a/arch/arm64/kvm/hyp/nvhe/switch.c
+++ b/arch/arm64/kvm/hyp/nvhe/switch.c
@@ -26,7 +26,6 @@
 #include <asm/debug-monitors.h>
 #include <asm/processor.h>
 
-#include <nvhe/fixed_config.h>
 #include <nvhe/mem_protect.h>
 
 /* Non-VHE specific context */
@@ -34,35 +33,30 @@ DEFINE_PER_CPU(struct kvm_host_data, kvm_host_data);
 DEFINE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt);
 DEFINE_PER_CPU(unsigned long, kvm_hyp_vector);
 
+struct fgt_masks hfgrtr_masks;
+struct fgt_masks hfgwtr_masks;
+struct fgt_masks hfgitr_masks;
+struct fgt_masks hdfgrtr_masks;
+struct fgt_masks hdfgwtr_masks;
+struct fgt_masks hafgrtr_masks;
+struct fgt_masks hfgrtr2_masks;
+struct fgt_masks hfgwtr2_masks;
+struct fgt_masks hfgitr2_masks;
+struct fgt_masks hdfgrtr2_masks;
+struct fgt_masks hdfgwtr2_masks;
+
 extern void kvm_nvhe_prepare_backtrace(unsigned long fp, unsigned long pc);
 
 static void __activate_traps(struct kvm_vcpu *vcpu)
 {
-	u64 val;
-
 	___activate_traps(vcpu, vcpu->arch.hcr_el2);
-	__activate_traps_common(vcpu);
 
-	val = vcpu->arch.cptr_el2;
-	val |= CPTR_EL2_TAM;	/* Same bit irrespective of E2H */
-	val |= has_hvhe() ? CPACR_EL1_TTA : CPTR_EL2_TTA;
-	if (cpus_have_final_cap(ARM64_SME)) {
-		if (has_hvhe())
-			val &= ~CPACR_ELx_SMEN;
-		else
-			val |= CPTR_EL2_TSM;
-	}
+	*host_data_ptr(host_debug_state.mdcr_el2) = read_sysreg(mdcr_el2);
+	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
 
-	if (!guest_owns_fp_regs()) {
-		if (has_hvhe())
-			val &= ~(CPACR_ELx_FPEN | CPACR_ELx_ZEN);
-		else
-			val |= CPTR_EL2_TFP | CPTR_EL2_TZ;
-
-		__activate_traps_fpsimd32(vcpu);
-	}
+	__activate_traps_common(vcpu);
+	__activate_cptr_traps(vcpu);
 
-	kvm_write_cptr_el2(val);
 	write_sysreg(__this_cpu_read(kvm_hyp_vector), vbar_el2);
 
 	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
@@ -103,11 +97,13 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 		isb();
 	}
 
+	write_sysreg(*host_data_ptr(host_debug_state.mdcr_el2), mdcr_el2);
+
 	__deactivate_traps_common(vcpu);
 
-	write_sysreg(this_cpu_ptr(&kvm_init_params)->hcr_el2, hcr_el2);
+	write_sysreg_hcr(this_cpu_ptr(&kvm_init_params)->hcr_el2);
 
-	kvm_reset_cptr_el2(vcpu);
+	__deactivate_cptr_traps(vcpu);
 	write_sysreg(__kvm_hyp_host_vector, vbar_el2);
 }
 
@@ -180,34 +176,6 @@ static bool kvm_handle_pvm_sys64(struct kvm_vcpu *vcpu, u64 *exit_code)
 		kvm_handle_pvm_sysreg(vcpu, exit_code));
 }
 
-static void kvm_hyp_save_fpsimd_host(struct kvm_vcpu *vcpu)
-{
-	/*
-	 * Non-protected kvm relies on the host restoring its sve state.
-	 * Protected kvm restores the host's sve state as not to reveal that
-	 * fpsimd was used by a guest nor leak upper sve bits.
-	 */
-	if (unlikely(is_protected_kvm_enabled() && system_supports_sve())) {
-		__hyp_sve_save_host();
-
-		/* Re-enable SVE traps if not supported for the guest vcpu. */
-		if (!vcpu_has_sve(vcpu))
-			cpacr_clear_set(CPACR_ELx_ZEN, 0);
-
-	} else {
-		__fpsimd_save_state(*host_data_ptr(fpsimd_state));
-	}
-
-	if (kvm_has_fpmr(kern_hyp_va(vcpu->kvm))) {
-		u64 val = read_sysreg_s(SYS_FPMR);
-
-		if (unlikely(is_protected_kvm_enabled()))
-			*host_data_ptr(fpmr) = val;
-		else
-			**host_data_ptr(fpmr_ptr) = val;
-	}
-}
-
 static const exit_handler_fn hyp_exit_handlers[] = {
 	[0 ... ESR_ELx_EC_MAX]		= NULL,
 	[ESR_ELx_EC_CP15_32]		= kvm_hyp_handle_cp15_32,
@@ -239,19 +207,21 @@ static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu)
 	return hyp_exit_handlers;
 }
 
-/*
- * Some guests (e.g., protected VMs) are not be allowed to run in AArch32.
- * The ARMv8 architecture does not give the hypervisor a mechanism to prevent a
- * guest from dropping to AArch32 EL0 if implemented by the CPU. If the
- * hypervisor spots a guest in such a state ensure it is handled, and don't
- * trust the host to spot or fix it.  The check below is based on the one in
- * kvm_arch_vcpu_ioctl_run().
- *
- * Returns false if the guest ran in AArch32 when it shouldn't have, and
- * thus should exit to the host, or true if a the guest run loop can continue.
- */
-static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code)
+static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
+	const exit_handler_fn *handlers = kvm_get_exit_handler_array(vcpu);
+
+	synchronize_vcpu_pstate(vcpu, exit_code);
+
+	/*
+	 * Some guests (e.g., protected VMs) are not be allowed to run in
+	 * AArch32.  The ARMv8 architecture does not give the hypervisor a
+	 * mechanism to prevent a guest from dropping to AArch32 EL0 if
+	 * implemented by the CPU. If the hypervisor spots a guest in such a
+	 * state ensure it is handled, and don't trust the host to spot or fix
+	 * it.  The check below is based on the one in
+	 * kvm_arch_vcpu_ioctl_run().
+	 */
 	if (unlikely(vcpu_is_protected(vcpu) && vcpu_mode_is_32bit(vcpu))) {
 		/*
 		 * As we have caught the guest red-handed, decide that it isn't
@@ -264,6 +234,8 @@ static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code)
 		*exit_code &= BIT(ARM_EXIT_WITH_SERROR_BIT);
 		*exit_code |= ARM_EXCEPTION_IL;
 	}
+
+	return __fixup_guest_exit(vcpu, exit_code, handlers);
 }
 
 /* Switch to the guest for legacy non-VHE systems */
@@ -306,7 +278,7 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 	 * We're about to restore some new MMU state. Make sure
 	 * ongoing page-table walks that have started before we
 	 * trapped to EL2 have completed. This also synchronises the
-	 * above disabling of SPE and TRBE.
+	 * above disabling of BRBE, SPE and TRBE.
 	 *
 	 * See DDI0487I.a D8.1.5 "Out-of-context translation regimes",
 	 * rule R_LFHQG and subsequent information statements.
diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
index 2860548d4250..3108b5185c20 100644
--- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c
+++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
@@ -11,7 +11,7 @@
 
 #include <hyp/adjust_pc.h>
 
-#include <nvhe/fixed_config.h>
+#include <nvhe/pkvm.h>
 
 #include "../../sys_regs.h"
 
@@ -28,222 +28,256 @@ u64 id_aa64mmfr1_el1_sys_val;
 u64 id_aa64mmfr2_el1_sys_val;
 u64 id_aa64smfr0_el1_sys_val;
 
-/*
- * Inject an unknown/undefined exception to an AArch64 guest while most of its
- * sysregs are live.
- */
-static void inject_undef64(struct kvm_vcpu *vcpu)
-{
-	u64 esr = (ESR_ELx_EC_UNKNOWN << ESR_ELx_EC_SHIFT);
-
-	*vcpu_pc(vcpu) = read_sysreg_el2(SYS_ELR);
-	*vcpu_cpsr(vcpu) = read_sysreg_el2(SYS_SPSR);
-
-	kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
-
-	__kvm_adjust_pc(vcpu);
-
-	write_sysreg_el1(esr, SYS_ESR);
-	write_sysreg_el1(read_sysreg_el2(SYS_ELR), SYS_ELR);
-	write_sysreg_el2(*vcpu_pc(vcpu), SYS_ELR);
-	write_sysreg_el2(*vcpu_cpsr(vcpu), SYS_SPSR);
-}
-
-/*
- * Returns the restricted features values of the feature register based on the
- * limitations in restrict_fields.
- * A feature id field value of 0b0000 does not impose any restrictions.
- * Note: Use only for unsigned feature field values.
- */
-static u64 get_restricted_features_unsigned(u64 sys_reg_val,
-					    u64 restrict_fields)
-{
-	u64 value = 0UL;
-	u64 mask = GENMASK_ULL(ARM64_FEATURE_FIELD_BITS - 1, 0);
+struct pvm_ftr_bits {
+	bool		sign;
+	u8		shift;
+	u8		width;
+	u8		max_val;
+	bool (*vm_supported)(const struct kvm *kvm);
+};
 
-	/*
-	 * According to the Arm Architecture Reference Manual, feature fields
-	 * use increasing values to indicate increases in functionality.
-	 * Iterate over the restricted feature fields and calculate the minimum
-	 * unsigned value between the one supported by the system, and what the
-	 * value is being restricted to.
-	 */
-	while (sys_reg_val && restrict_fields) {
-		value |= min(sys_reg_val & mask, restrict_fields & mask);
-		sys_reg_val &= ~mask;
-		restrict_fields &= ~mask;
-		mask <<= ARM64_FEATURE_FIELD_BITS;
+#define __MAX_FEAT_FUNC(id, fld, max, func, sgn)				\
+	{									\
+		.sign = sgn,							\
+		.shift = id##_##fld##_SHIFT,					\
+		.width = id##_##fld##_WIDTH,					\
+		.max_val = id##_##fld##_##max,					\
+		.vm_supported = func,						\
 	}
 
-	return value;
-}
-
-/*
- * Functions that return the value of feature id registers for protected VMs
- * based on allowed features, system features, and KVM support.
- */
-
-static u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu)
-{
-	u64 set_mask = 0;
-	u64 allow_mask = PVM_ID_AA64PFR0_ALLOW;
-
-	set_mask |= get_restricted_features_unsigned(id_aa64pfr0_el1_sys_val,
-		PVM_ID_AA64PFR0_RESTRICT_UNSIGNED);
+#define MAX_FEAT_FUNC(id, fld, max, func)					\
+	__MAX_FEAT_FUNC(id, fld, max, func, id##_##fld##_SIGNED)
 
-	return (id_aa64pfr0_el1_sys_val & allow_mask) | set_mask;
-}
+#define MAX_FEAT(id, fld, max)							\
+	MAX_FEAT_FUNC(id, fld, max, NULL)
 
-static u64 get_pvm_id_aa64pfr1(const struct kvm_vcpu *vcpu)
-{
-	const struct kvm *kvm = (const struct kvm *)kern_hyp_va(vcpu->kvm);
-	u64 allow_mask = PVM_ID_AA64PFR1_ALLOW;
+#define MAX_FEAT_ENUM(id, fld, max)						\
+	__MAX_FEAT_FUNC(id, fld, max, NULL, false)
 
-	if (!kvm_has_mte(kvm))
-		allow_mask &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE);
-
-	return id_aa64pfr1_el1_sys_val & allow_mask;
-}
-
-static u64 get_pvm_id_aa64zfr0(const struct kvm_vcpu *vcpu)
-{
-	/*
-	 * No support for Scalable Vectors, therefore, hyp has no sanitized
-	 * copy of the feature id register.
-	 */
-	BUILD_BUG_ON(PVM_ID_AA64ZFR0_ALLOW != 0ULL);
-	return 0;
-}
-
-static u64 get_pvm_id_aa64dfr0(const struct kvm_vcpu *vcpu)
-{
-	/*
-	 * No support for debug, including breakpoints, and watchpoints,
-	 * therefore, pKVM has no sanitized copy of the feature id register.
-	 */
-	BUILD_BUG_ON(PVM_ID_AA64DFR0_ALLOW != 0ULL);
-	return 0;
-}
+#define FEAT_END {	.width = 0,	}
 
-static u64 get_pvm_id_aa64dfr1(const struct kvm_vcpu *vcpu)
+static bool vm_has_ptrauth(const struct kvm *kvm)
 {
-	/*
-	 * No support for debug, therefore, hyp has no sanitized copy of the
-	 * feature id register.
-	 */
-	BUILD_BUG_ON(PVM_ID_AA64DFR1_ALLOW != 0ULL);
-	return 0;
-}
+	if (!IS_ENABLED(CONFIG_ARM64_PTR_AUTH))
+		return false;
 
-static u64 get_pvm_id_aa64afr0(const struct kvm_vcpu *vcpu)
-{
-	/*
-	 * No support for implementation defined features, therefore, hyp has no
-	 * sanitized copy of the feature id register.
-	 */
-	BUILD_BUG_ON(PVM_ID_AA64AFR0_ALLOW != 0ULL);
-	return 0;
+	return (cpus_have_final_cap(ARM64_HAS_ADDRESS_AUTH) ||
+		cpus_have_final_cap(ARM64_HAS_GENERIC_AUTH)) &&
+		kvm_vcpu_has_feature(kvm, KVM_ARM_VCPU_PTRAUTH_GENERIC);
 }
 
-static u64 get_pvm_id_aa64afr1(const struct kvm_vcpu *vcpu)
+static bool vm_has_sve(const struct kvm *kvm)
 {
-	/*
-	 * No support for implementation defined features, therefore, hyp has no
-	 * sanitized copy of the feature id register.
-	 */
-	BUILD_BUG_ON(PVM_ID_AA64AFR1_ALLOW != 0ULL);
-	return 0;
+	return system_supports_sve() && kvm_vcpu_has_feature(kvm, KVM_ARM_VCPU_SVE);
 }
 
-static u64 get_pvm_id_aa64isar0(const struct kvm_vcpu *vcpu)
-{
-	return id_aa64isar0_el1_sys_val & PVM_ID_AA64ISAR0_ALLOW;
-}
+/*
+ * Definitions for features to be allowed or restricted for protected guests.
+ *
+ * Each field in the masks represents the highest supported value for the
+ * feature. If a feature field is not present, it is not supported. Moreover,
+ * these are used to generate the guest's view of the feature registers.
+ *
+ * The approach for protected VMs is to at least support features that are:
+ * - Needed by common Linux distributions (e.g., floating point)
+ * - Trivial to support, e.g., supporting the feature does not introduce or
+ * require tracking of additional state in KVM
+ * - Cannot be trapped or prevent the guest from using anyway
+ */
 
-static u64 get_pvm_id_aa64isar1(const struct kvm_vcpu *vcpu)
-{
-	u64 allow_mask = PVM_ID_AA64ISAR1_ALLOW;
+static const struct pvm_ftr_bits pvmid_aa64pfr0[] = {
+	MAX_FEAT(ID_AA64PFR0_EL1, EL0, IMP),
+	MAX_FEAT(ID_AA64PFR0_EL1, EL1, IMP),
+	MAX_FEAT(ID_AA64PFR0_EL1, EL2, IMP),
+	MAX_FEAT(ID_AA64PFR0_EL1, EL3, IMP),
+	MAX_FEAT(ID_AA64PFR0_EL1, FP, FP16),
+	MAX_FEAT(ID_AA64PFR0_EL1, AdvSIMD, FP16),
+	MAX_FEAT(ID_AA64PFR0_EL1, GIC, IMP),
+	MAX_FEAT_FUNC(ID_AA64PFR0_EL1, SVE, IMP, vm_has_sve),
+	MAX_FEAT(ID_AA64PFR0_EL1, RAS, IMP),
+	MAX_FEAT(ID_AA64PFR0_EL1, DIT, IMP),
+	MAX_FEAT(ID_AA64PFR0_EL1, CSV2, IMP),
+	MAX_FEAT(ID_AA64PFR0_EL1, CSV3, IMP),
+	FEAT_END
+};
 
-	if (!vcpu_has_ptrauth(vcpu))
-		allow_mask &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) |
-				ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) |
-				ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA) |
-				ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI));
+static const struct pvm_ftr_bits pvmid_aa64pfr1[] = {
+	MAX_FEAT(ID_AA64PFR1_EL1, BT, IMP),
+	MAX_FEAT(ID_AA64PFR1_EL1, SSBS, SSBS2),
+	MAX_FEAT_ENUM(ID_AA64PFR1_EL1, MTE_frac, NI),
+	FEAT_END
+};
 
-	return id_aa64isar1_el1_sys_val & allow_mask;
-}
+static const struct pvm_ftr_bits pvmid_aa64mmfr0[] = {
+	MAX_FEAT_ENUM(ID_AA64MMFR0_EL1, PARANGE, 40),
+	MAX_FEAT_ENUM(ID_AA64MMFR0_EL1, ASIDBITS, 16),
+	MAX_FEAT(ID_AA64MMFR0_EL1, BIGEND, IMP),
+	MAX_FEAT(ID_AA64MMFR0_EL1, SNSMEM, IMP),
+	MAX_FEAT(ID_AA64MMFR0_EL1, BIGENDEL0, IMP),
+	MAX_FEAT(ID_AA64MMFR0_EL1, EXS, IMP),
+	FEAT_END
+};
 
-static u64 get_pvm_id_aa64isar2(const struct kvm_vcpu *vcpu)
-{
-	u64 allow_mask = PVM_ID_AA64ISAR2_ALLOW;
+static const struct pvm_ftr_bits pvmid_aa64mmfr1[] = {
+	MAX_FEAT(ID_AA64MMFR1_EL1, HAFDBS, DBM),
+	MAX_FEAT_ENUM(ID_AA64MMFR1_EL1, VMIDBits, 16),
+	MAX_FEAT(ID_AA64MMFR1_EL1, HPDS, HPDS2),
+	MAX_FEAT(ID_AA64MMFR1_EL1, PAN, PAN3),
+	MAX_FEAT(ID_AA64MMFR1_EL1, SpecSEI, IMP),
+	MAX_FEAT(ID_AA64MMFR1_EL1, ETS, IMP),
+	MAX_FEAT(ID_AA64MMFR1_EL1, CMOW, IMP),
+	FEAT_END
+};
 
-	if (!vcpu_has_ptrauth(vcpu))
-		allow_mask &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) |
-				ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3));
+static const struct pvm_ftr_bits pvmid_aa64mmfr2[] = {
+	MAX_FEAT(ID_AA64MMFR2_EL1, CnP, IMP),
+	MAX_FEAT(ID_AA64MMFR2_EL1, UAO, IMP),
+	MAX_FEAT(ID_AA64MMFR2_EL1, IESB, IMP),
+	MAX_FEAT(ID_AA64MMFR2_EL1, AT, IMP),
+	MAX_FEAT_ENUM(ID_AA64MMFR2_EL1, IDS, 0x18),
+	MAX_FEAT(ID_AA64MMFR2_EL1, TTL, IMP),
+	MAX_FEAT(ID_AA64MMFR2_EL1, BBM, 2),
+	MAX_FEAT(ID_AA64MMFR2_EL1, E0PD, IMP),
+	FEAT_END
+};
 
-	return id_aa64isar2_el1_sys_val & allow_mask;
-}
+static const struct pvm_ftr_bits pvmid_aa64isar1[] = {
+	MAX_FEAT(ID_AA64ISAR1_EL1, DPB, DPB2),
+	MAX_FEAT_FUNC(ID_AA64ISAR1_EL1, APA, PAuth, vm_has_ptrauth),
+	MAX_FEAT_FUNC(ID_AA64ISAR1_EL1, API, PAuth, vm_has_ptrauth),
+	MAX_FEAT(ID_AA64ISAR1_EL1, JSCVT, IMP),
+	MAX_FEAT(ID_AA64ISAR1_EL1, FCMA, IMP),
+	MAX_FEAT(ID_AA64ISAR1_EL1, LRCPC, LRCPC3),
+	MAX_FEAT(ID_AA64ISAR1_EL1, GPA, IMP),
+	MAX_FEAT(ID_AA64ISAR1_EL1, GPI, IMP),
+	MAX_FEAT(ID_AA64ISAR1_EL1, FRINTTS, IMP),
+	MAX_FEAT(ID_AA64ISAR1_EL1, SB, IMP),
+	MAX_FEAT(ID_AA64ISAR1_EL1, SPECRES, COSP_RCTX),
+	MAX_FEAT(ID_AA64ISAR1_EL1, BF16, EBF16),
+	MAX_FEAT(ID_AA64ISAR1_EL1, DGH, IMP),
+	MAX_FEAT(ID_AA64ISAR1_EL1, I8MM, IMP),
+	FEAT_END
+};
 
-static u64 get_pvm_id_aa64mmfr0(const struct kvm_vcpu *vcpu)
-{
-	u64 set_mask;
+static const struct pvm_ftr_bits pvmid_aa64isar2[] = {
+	MAX_FEAT_FUNC(ID_AA64ISAR2_EL1, GPA3, IMP, vm_has_ptrauth),
+	MAX_FEAT_FUNC(ID_AA64ISAR2_EL1, APA3, PAuth, vm_has_ptrauth),
+	MAX_FEAT(ID_AA64ISAR2_EL1, ATS1A, IMP),
+	FEAT_END
+};
 
-	set_mask = get_restricted_features_unsigned(id_aa64mmfr0_el1_sys_val,
-		PVM_ID_AA64MMFR0_RESTRICT_UNSIGNED);
+/*
+ * None of the features in ID_AA64DFR0_EL1 nor ID_AA64MMFR4_EL1 are supported.
+ * However, both have Not-Implemented values that are non-zero. Define them
+ * so they can be used when getting the value of these registers.
+ */
+#define ID_AA64DFR0_EL1_NONZERO_NI					\
+(									\
+	SYS_FIELD_PREP_ENUM(ID_AA64DFR0_EL1, DoubleLock, NI)	|	\
+	SYS_FIELD_PREP_ENUM(ID_AA64DFR0_EL1, MTPMU, NI)			\
+)
 
-	return (id_aa64mmfr0_el1_sys_val & PVM_ID_AA64MMFR0_ALLOW) | set_mask;
-}
+#define ID_AA64MMFR4_EL1_NONZERO_NI					\
+	SYS_FIELD_PREP_ENUM(ID_AA64MMFR4_EL1, E2H0, NI)
 
-static u64 get_pvm_id_aa64mmfr1(const struct kvm_vcpu *vcpu)
+/*
+ * Returns the value of the feature registers based on the system register
+ * value, the vcpu support for the revelant features, and the additional
+ * restrictions for protected VMs.
+ */
+static u64 get_restricted_features(const struct kvm_vcpu *vcpu,
+				   u64 sys_reg_val,
+				   const struct pvm_ftr_bits restrictions[])
 {
-	return id_aa64mmfr1_el1_sys_val & PVM_ID_AA64MMFR1_ALLOW;
-}
+	u64 val = 0UL;
+	int i;
+
+	for (i = 0; restrictions[i].width != 0; i++) {
+		bool (*vm_supported)(const struct kvm *) = restrictions[i].vm_supported;
+		bool sign = restrictions[i].sign;
+		int shift = restrictions[i].shift;
+		int width = restrictions[i].width;
+		u64 min_signed = (1UL << width) - 1UL;
+		u64 sign_bit = 1UL << (width - 1);
+		u64 mask = GENMASK_ULL(width + shift - 1, shift);
+		u64 sys_val = (sys_reg_val & mask) >> shift;
+		u64 pvm_max = restrictions[i].max_val;
+
+		if (vm_supported && !vm_supported(vcpu->kvm))
+			val |= (sign ? min_signed : 0) << shift;
+		else if (sign && (sys_val >= sign_bit || pvm_max >= sign_bit))
+			val |= max(sys_val, pvm_max) << shift;
+		else
+			val |= min(sys_val, pvm_max) << shift;
+	}
 
-static u64 get_pvm_id_aa64mmfr2(const struct kvm_vcpu *vcpu)
-{
-	return id_aa64mmfr2_el1_sys_val & PVM_ID_AA64MMFR2_ALLOW;
+	return val;
 }
 
-/* Read a sanitized cpufeature ID register by its encoding */
-u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id)
+static u64 pvm_calc_id_reg(const struct kvm_vcpu *vcpu, u32 id)
 {
 	switch (id) {
 	case SYS_ID_AA64PFR0_EL1:
-		return get_pvm_id_aa64pfr0(vcpu);
+		return get_restricted_features(vcpu, id_aa64pfr0_el1_sys_val, pvmid_aa64pfr0);
 	case SYS_ID_AA64PFR1_EL1:
-		return get_pvm_id_aa64pfr1(vcpu);
-	case SYS_ID_AA64ZFR0_EL1:
-		return get_pvm_id_aa64zfr0(vcpu);
-	case SYS_ID_AA64DFR0_EL1:
-		return get_pvm_id_aa64dfr0(vcpu);
-	case SYS_ID_AA64DFR1_EL1:
-		return get_pvm_id_aa64dfr1(vcpu);
-	case SYS_ID_AA64AFR0_EL1:
-		return get_pvm_id_aa64afr0(vcpu);
-	case SYS_ID_AA64AFR1_EL1:
-		return get_pvm_id_aa64afr1(vcpu);
+		return get_restricted_features(vcpu, id_aa64pfr1_el1_sys_val, pvmid_aa64pfr1);
 	case SYS_ID_AA64ISAR0_EL1:
-		return get_pvm_id_aa64isar0(vcpu);
+		return id_aa64isar0_el1_sys_val;
 	case SYS_ID_AA64ISAR1_EL1:
-		return get_pvm_id_aa64isar1(vcpu);
+		return get_restricted_features(vcpu, id_aa64isar1_el1_sys_val, pvmid_aa64isar1);
 	case SYS_ID_AA64ISAR2_EL1:
-		return get_pvm_id_aa64isar2(vcpu);
+		return get_restricted_features(vcpu, id_aa64isar2_el1_sys_val, pvmid_aa64isar2);
 	case SYS_ID_AA64MMFR0_EL1:
-		return get_pvm_id_aa64mmfr0(vcpu);
+		return get_restricted_features(vcpu, id_aa64mmfr0_el1_sys_val, pvmid_aa64mmfr0);
 	case SYS_ID_AA64MMFR1_EL1:
-		return get_pvm_id_aa64mmfr1(vcpu);
+		return get_restricted_features(vcpu, id_aa64mmfr1_el1_sys_val, pvmid_aa64mmfr1);
 	case SYS_ID_AA64MMFR2_EL1:
-		return get_pvm_id_aa64mmfr2(vcpu);
+		return get_restricted_features(vcpu, id_aa64mmfr2_el1_sys_val, pvmid_aa64mmfr2);
+	case SYS_ID_AA64DFR0_EL1:
+		return ID_AA64DFR0_EL1_NONZERO_NI;
+	case SYS_ID_AA64MMFR4_EL1:
+		return ID_AA64MMFR4_EL1_NONZERO_NI;
 	default:
 		/* Unhandled ID register, RAZ */
 		return 0;
 	}
 }
 
+/*
+ * Inject an unknown/undefined exception to an AArch64 guest while most of its
+ * sysregs are live.
+ */
+static void inject_undef64(struct kvm_vcpu *vcpu)
+{
+	u64 esr = (ESR_ELx_EC_UNKNOWN << ESR_ELx_EC_SHIFT);
+
+	*vcpu_pc(vcpu) = read_sysreg_el2(SYS_ELR);
+	*vcpu_cpsr(vcpu) = read_sysreg_el2(SYS_SPSR);
+	__vcpu_assign_sys_reg(vcpu, VBAR_EL1, read_sysreg_el1(SYS_VBAR));
+
+	kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
+
+	__kvm_adjust_pc(vcpu);
+
+	write_sysreg_el1(esr, SYS_ESR);
+	write_sysreg_el1(read_sysreg_el2(SYS_ELR), SYS_ELR);
+	write_sysreg_el2(*vcpu_pc(vcpu), SYS_ELR);
+	write_sysreg_el2(*vcpu_cpsr(vcpu), SYS_SPSR);
+}
+
 static u64 read_id_reg(const struct kvm_vcpu *vcpu,
 		       struct sys_reg_desc const *r)
 {
-	return pvm_read_id_reg(vcpu, reg_to_encoding(r));
+	struct kvm *kvm = vcpu->kvm;
+	u32 reg = reg_to_encoding(r);
+
+	if (WARN_ON_ONCE(!test_bit(KVM_ARCH_FLAG_ID_REGS_INITIALIZED, &kvm->arch.flags)))
+		return 0;
+
+	if (reg >= sys_reg(3, 0, 0, 1, 0) && reg <= sys_reg(3, 0, 0, 7, 7))
+		return kvm->arch.id_regs[IDREG_IDX(reg)];
+
+	return 0;
 }
 
 /* Handler to RAZ/WI sysregs */
@@ -271,13 +305,6 @@ static bool pvm_access_id_aarch32(struct kvm_vcpu *vcpu,
 		return false;
 	}
 
-	/*
-	 * No support for AArch32 guests, therefore, pKVM has no sanitized copy
-	 * of AArch32 feature id registers.
-	 */
-	BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL1),
-		     PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) > ID_AA64PFR0_EL1_EL1_IMP);
-
 	return pvm_access_raz_wi(vcpu, p, r);
 }
 
@@ -346,6 +373,9 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = {
 
 	/* Debug and Trace Registers are restricted. */
 
+	/* Group 1 ID registers */
+	HOST_HANDLED(SYS_REVIDR_EL1),
+
 	/* AArch64 mappings of the AArch32 ID registers */
 	/* CRm=1 */
 	AARCH32(SYS_ID_PFR0_EL1),
@@ -414,6 +444,8 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = {
 
 	/* Scalable Vector Registers are restricted. */
 
+	HOST_HANDLED(SYS_ICC_PMR_EL1),
+
 	RAZ_WI(SYS_ERRIDR_EL1),
 	RAZ_WI(SYS_ERRSELR_EL1),
 	RAZ_WI(SYS_ERXFR_EL1),
@@ -427,13 +459,17 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = {
 
 	/* Limited Ordering Regions Registers are restricted. */
 
+	HOST_HANDLED(SYS_ICC_DIR_EL1),
+	HOST_HANDLED(SYS_ICC_RPR_EL1),
 	HOST_HANDLED(SYS_ICC_SGI1R_EL1),
 	HOST_HANDLED(SYS_ICC_ASGI1R_EL1),
 	HOST_HANDLED(SYS_ICC_SGI0R_EL1),
+	HOST_HANDLED(SYS_ICC_CTLR_EL1),
 	{ SYS_DESC(SYS_ICC_SRE_EL1), .access = pvm_gic_read_sre, },
 
 	HOST_HANDLED(SYS_CCSIDR_EL1),
 	HOST_HANDLED(SYS_CLIDR_EL1),
+	HOST_HANDLED(SYS_AIDR_EL1),
 	HOST_HANDLED(SYS_CSSELR_EL1),
 	HOST_HANDLED(SYS_CTR_EL0),
 
@@ -449,6 +485,30 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = {
 };
 
 /*
+ * Initializes feature registers for protected vms.
+ */
+void kvm_init_pvm_id_regs(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+	struct kvm_arch *ka = &kvm->arch;
+	u32 r;
+
+	hyp_assert_lock_held(&vm_table_lock);
+
+	if (test_bit(KVM_ARCH_FLAG_ID_REGS_INITIALIZED, &kvm->arch.flags))
+		return;
+
+	/*
+	 * Initialize only AArch64 id registers since AArch32 isn't supported
+	 * for protected VMs.
+	 */
+	for (r = sys_reg(3, 0, 0, 4, 0); r <= sys_reg(3, 0, 0, 7, 7); r += sys_reg(0, 0, 0, 0, 1))
+		ka->id_regs[IDREG_IDX(r)] = pvm_calc_id_reg(vcpu, r);
+
+	set_bit(KVM_ARCH_FLAG_ID_REGS_INITIALIZED, &kvm->arch.flags);
+}
+
+/*
  * Checks that the sysreg table is unique and in-order.
  *
  * Returns 0 if the table is consistent, or 1 otherwise.
diff --git a/arch/arm64/kvm/hyp/nvhe/sysreg-sr.c b/arch/arm64/kvm/hyp/nvhe/sysreg-sr.c
index dba101565de3..3cc613cce5f5 100644
--- a/arch/arm64/kvm/hyp/nvhe/sysreg-sr.c
+++ b/arch/arm64/kvm/hyp/nvhe/sysreg-sr.c
@@ -28,7 +28,9 @@ void __sysreg_save_state_nvhe(struct kvm_cpu_context *ctxt)
 
 void __sysreg_restore_state_nvhe(struct kvm_cpu_context *ctxt)
 {
-	__sysreg_restore_el1_state(ctxt, ctxt_sys_reg(ctxt, MPIDR_EL1));
+	u64 midr = ctxt_midr_el1(ctxt);
+
+	__sysreg_restore_el1_state(ctxt, midr, ctxt_sys_reg(ctxt, MPIDR_EL1));
 	__sysreg_restore_common_state(ctxt);
 	__sysreg_restore_user_state(ctxt);
 	__sysreg_restore_el2_return_state(ctxt);
diff --git a/arch/arm64/kvm/hyp/nvhe/timer-sr.c b/arch/arm64/kvm/hyp/nvhe/timer-sr.c
index 3aaab20ae5b4..ff176f4ce7de 100644
--- a/arch/arm64/kvm/hyp/nvhe/timer-sr.c
+++ b/arch/arm64/kvm/hyp/nvhe/timer-sr.c
@@ -22,15 +22,16 @@ void __kvm_timer_set_cntvoff(u64 cntvoff)
  */
 void __timer_disable_traps(struct kvm_vcpu *vcpu)
 {
-	u64 val, shift = 0;
+	u64 set, clr, shift = 0;
 
 	if (has_hvhe())
 		shift = 10;
 
 	/* Allow physical timer/counter access for the host */
-	val = read_sysreg(cnthctl_el2);
-	val |= (CNTHCTL_EL1PCTEN | CNTHCTL_EL1PCEN) << shift;
-	write_sysreg(val, cnthctl_el2);
+	set = (CNTHCTL_EL1PCTEN | CNTHCTL_EL1PCEN) << shift;
+	clr = CNTHCTL_EL1TVT | CNTHCTL_EL1TVCT;
+
+	sysreg_clear_set(cnthctl_el2, clr, set);
 }
 
 /*
@@ -58,5 +59,12 @@ void __timer_enable_traps(struct kvm_vcpu *vcpu)
 		set <<= 10;
 	}
 
+	/*
+	 * Trap the virtual counter/timer if we have a broken cntvoff
+	 * implementation.
+	 */
+	if (has_broken_cntvoff())
+		set |= CNTHCTL_EL1TVT | CNTHCTL_EL1TVCT;
+
 	sysreg_clear_set(cnthctl_el2, clr, set);
 }
diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
index 40bd55966540..947ac1a951a5 100644
--- a/arch/arm64/kvm/hyp/pgtable.c
+++ b/arch/arm64/kvm/hyp/pgtable.c
@@ -11,12 +11,6 @@
 #include <asm/kvm_pgtable.h>
 #include <asm/stage2_pgtable.h>
 
-
-#define KVM_PTE_TYPE			BIT(1)
-#define KVM_PTE_TYPE_BLOCK		0
-#define KVM_PTE_TYPE_PAGE		1
-#define KVM_PTE_TYPE_TABLE		1
-
 struct kvm_pgtable_walk_data {
 	struct kvm_pgtable_walker	*walker;
 
@@ -35,14 +29,6 @@ static bool kvm_pgtable_walk_skip_cmo(const struct kvm_pgtable_visit_ctx *ctx)
 	return unlikely(ctx->flags & KVM_PGTABLE_WALK_SKIP_CMO);
 }
 
-static bool kvm_phys_is_valid(u64 phys)
-{
-	u64 parange_max = kvm_get_parange_max();
-	u8 shift = id_aa64mmfr0_parange_to_phys_shift(parange_max);
-
-	return phys < BIT(shift);
-}
-
 static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx, u64 phys)
 {
 	u64 granule = kvm_granule_size(ctx->level);
@@ -53,7 +39,7 @@ static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx,
 	if (granule > (ctx->end - ctx->addr))
 		return false;
 
-	if (kvm_phys_is_valid(phys) && !IS_ALIGNED(phys, granule))
+	if (!IS_ALIGNED(phys, granule))
 		return false;
 
 	return IS_ALIGNED(ctx->addr, granule);
@@ -587,6 +573,9 @@ struct stage2_map_data {
 
 	/* Force mappings to page granularity */
 	bool				force_pte;
+
+	/* Walk should update owner_id only */
+	bool				annotation;
 };
 
 u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
@@ -672,11 +661,37 @@ void kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu,
 
 #define KVM_S2_MEMATTR(pgt, attr) PAGE_S2_MEMATTR(attr, stage2_has_fwb(pgt))
 
+static int stage2_set_xn_attr(enum kvm_pgtable_prot prot, kvm_pte_t *attr)
+{
+	bool px, ux;
+	u8 xn;
+
+	px = prot & KVM_PGTABLE_PROT_PX;
+	ux = prot & KVM_PGTABLE_PROT_UX;
+
+	if (!cpus_have_final_cap(ARM64_HAS_XNX) && px != ux)
+		return -EINVAL;
+
+	if (px && ux)
+		xn = 0b00;
+	else if (!px && ux)
+		xn = 0b01;
+	else if (!px && !ux)
+		xn = 0b10;
+	else
+		xn = 0b11;
+
+	*attr &= ~KVM_PTE_LEAF_ATTR_HI_S2_XN;
+	*attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_HI_S2_XN, xn);
+	return 0;
+}
+
 static int stage2_set_prot_attr(struct kvm_pgtable *pgt, enum kvm_pgtable_prot prot,
 				kvm_pte_t *ptep)
 {
 	kvm_pte_t attr;
 	u32 sh = KVM_PTE_LEAF_ATTR_LO_S2_SH_IS;
+	int r;
 
 	switch (prot & (KVM_PGTABLE_PROT_DEVICE |
 			KVM_PGTABLE_PROT_NORMAL_NC)) {
@@ -696,8 +711,9 @@ static int stage2_set_prot_attr(struct kvm_pgtable *pgt, enum kvm_pgtable_prot p
 		attr = KVM_S2_MEMATTR(pgt, NORMAL);
 	}
 
-	if (!(prot & KVM_PGTABLE_PROT_X))
-		attr |= KVM_PTE_LEAF_ATTR_HI_S2_XN;
+	r = stage2_set_xn_attr(prot, &attr);
+	if (r)
+		return r;
 
 	if (prot & KVM_PGTABLE_PROT_R)
 		attr |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R;
@@ -726,8 +742,20 @@ enum kvm_pgtable_prot kvm_pgtable_stage2_pte_prot(kvm_pte_t pte)
 		prot |= KVM_PGTABLE_PROT_R;
 	if (pte & KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W)
 		prot |= KVM_PGTABLE_PROT_W;
-	if (!(pte & KVM_PTE_LEAF_ATTR_HI_S2_XN))
-		prot |= KVM_PGTABLE_PROT_X;
+
+	switch (FIELD_GET(KVM_PTE_LEAF_ATTR_HI_S2_XN, pte)) {
+	case 0b00:
+		prot |= KVM_PGTABLE_PROT_PX | KVM_PGTABLE_PROT_UX;
+		break;
+	case 0b01:
+		prot |= KVM_PGTABLE_PROT_UX;
+		break;
+	case 0b11:
+		prot |= KVM_PGTABLE_PROT_PX;
+		break;
+	default:
+		break;
+	}
 
 	return prot;
 }
@@ -885,18 +913,7 @@ static u64 stage2_map_walker_phys_addr(const struct kvm_pgtable_visit_ctx *ctx,
 {
 	u64 phys = data->phys;
 
-	/*
-	 * Stage-2 walks to update ownership data are communicated to the map
-	 * walker using an invalid PA. Avoid offsetting an already invalid PA,
-	 * which could overflow and make the address valid again.
-	 */
-	if (!kvm_phys_is_valid(phys))
-		return phys;
-
-	/*
-	 * Otherwise, work out the correct PA based on how far the walk has
-	 * gotten.
-	 */
+	/* Work out the correct PA based on how far the walk has gotten */
 	return phys + (ctx->addr - ctx->start);
 }
 
@@ -908,6 +925,9 @@ static bool stage2_leaf_mapping_allowed(const struct kvm_pgtable_visit_ctx *ctx,
 	if (data->force_pte && ctx->level < KVM_PGTABLE_LAST_LEVEL)
 		return false;
 
+	if (data->annotation)
+		return true;
+
 	return kvm_block_mapping_supported(ctx, phys);
 }
 
@@ -923,7 +943,7 @@ static int stage2_map_walker_try_leaf(const struct kvm_pgtable_visit_ctx *ctx,
 	if (!stage2_leaf_mapping_allowed(ctx, data))
 		return -E2BIG;
 
-	if (kvm_phys_is_valid(phys))
+	if (!data->annotation)
 		new = kvm_init_valid_leaf_pte(phys, data->attr, ctx->level);
 	else
 		new = kvm_init_invalid_leaf_owner(data->owner_id);
@@ -1085,11 +1105,11 @@ int kvm_pgtable_stage2_set_owner(struct kvm_pgtable *pgt, u64 addr, u64 size,
 {
 	int ret;
 	struct stage2_map_data map_data = {
-		.phys		= KVM_PHYS_INVALID,
 		.mmu		= pgt->mmu,
 		.memcache	= mc,
 		.owner_id	= owner_id,
 		.force_pte	= true,
+		.annotation	= true,
 	};
 	struct kvm_pgtable_walker walker = {
 		.cb		= stage2_map_walker,
@@ -1245,14 +1265,13 @@ int kvm_pgtable_stage2_wrprotect(struct kvm_pgtable *pgt, u64 addr, u64 size)
 					NULL, NULL, 0);
 }
 
-void kvm_pgtable_stage2_mkyoung(struct kvm_pgtable *pgt, u64 addr)
+void kvm_pgtable_stage2_mkyoung(struct kvm_pgtable *pgt, u64 addr,
+				enum kvm_pgtable_walk_flags flags)
 {
 	int ret;
 
 	ret = stage2_update_leaf_attrs(pgt, addr, 1, KVM_PTE_LEAF_ATTR_LO_S2_AF, 0,
-				       NULL, NULL,
-				       KVM_PGTABLE_WALK_HANDLE_FAULT |
-				       KVM_PGTABLE_WALK_SHARED);
+				       NULL, NULL, flags);
 	if (!ret)
 		dsb(ishst);
 }
@@ -1308,11 +1327,11 @@ bool kvm_pgtable_stage2_test_clear_young(struct kvm_pgtable *pgt, u64 addr,
 }
 
 int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr,
-				   enum kvm_pgtable_prot prot)
+				   enum kvm_pgtable_prot prot, enum kvm_pgtable_walk_flags flags)
 {
-	int ret;
+	kvm_pte_t xn = 0, set = 0, clr = 0;
 	s8 level;
-	kvm_pte_t set = 0, clr = 0;
+	int ret;
 
 	if (prot & KVM_PTE_LEAF_ATTR_HI_SW)
 		return -EINVAL;
@@ -1323,12 +1342,14 @@ int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr,
 	if (prot & KVM_PGTABLE_PROT_W)
 		set |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W;
 
-	if (prot & KVM_PGTABLE_PROT_X)
-		clr |= KVM_PTE_LEAF_ATTR_HI_S2_XN;
+	ret = stage2_set_xn_attr(prot, &xn);
+	if (ret)
+		return ret;
+
+	set |= xn & KVM_PTE_LEAF_ATTR_HI_S2_XN;
+	clr |= ~xn & KVM_PTE_LEAF_ATTR_HI_S2_XN;
 
-	ret = stage2_update_leaf_attrs(pgt, addr, 1, set, clr, NULL, &level,
-				       KVM_PGTABLE_WALK_HANDLE_FAULT |
-				       KVM_PGTABLE_WALK_SHARED);
+	ret = stage2_update_leaf_attrs(pgt, addr, 1, set, clr, NULL, &level, flags);
 	if (!ret || ret == -EAGAIN)
 		kvm_call_hyp(__kvm_tlb_flush_vmid_ipa_nsh, pgt->mmu, addr, level);
 	return ret;
@@ -1557,37 +1578,80 @@ size_t kvm_pgtable_stage2_pgd_size(u64 vtcr)
 	return kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE;
 }
 
-static int stage2_free_walker(const struct kvm_pgtable_visit_ctx *ctx,
-			      enum kvm_pgtable_walk_flags visit)
+static int stage2_free_leaf(const struct kvm_pgtable_visit_ctx *ctx)
 {
 	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
 
-	if (!stage2_pte_is_counted(ctx->old))
+	mm_ops->put_page(ctx->ptep);
+	return 0;
+}
+
+static int stage2_free_table_post(const struct kvm_pgtable_visit_ctx *ctx)
+{
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+	kvm_pte_t *childp = kvm_pte_follow(ctx->old, mm_ops);
+
+	if (mm_ops->page_count(childp) != 1)
 		return 0;
 
+	/*
+	 * Drop references and clear the now stale PTE to avoid rewalking the
+	 * freed page table.
+	 */
 	mm_ops->put_page(ctx->ptep);
+	mm_ops->put_page(childp);
+	kvm_clear_pte(ctx->ptep);
+	return 0;
+}
 
-	if (kvm_pte_table(ctx->old, ctx->level))
-		mm_ops->put_page(kvm_pte_follow(ctx->old, mm_ops));
+static int stage2_free_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			      enum kvm_pgtable_walk_flags visit)
+{
+	if (!stage2_pte_is_counted(ctx->old))
+		return 0;
 
-	return 0;
+	switch (visit) {
+	case KVM_PGTABLE_WALK_LEAF:
+		return stage2_free_leaf(ctx);
+	case KVM_PGTABLE_WALK_TABLE_POST:
+		return stage2_free_table_post(ctx);
+	default:
+		return -EINVAL;
+	}
 }
 
-void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt)
+void kvm_pgtable_stage2_destroy_range(struct kvm_pgtable *pgt,
+				       u64 addr, u64 size)
 {
-	size_t pgd_sz;
 	struct kvm_pgtable_walker walker = {
 		.cb	= stage2_free_walker,
 		.flags	= KVM_PGTABLE_WALK_LEAF |
 			  KVM_PGTABLE_WALK_TABLE_POST,
 	};
 
-	WARN_ON(kvm_pgtable_walk(pgt, 0, BIT(pgt->ia_bits), &walker));
+	WARN_ON(kvm_pgtable_walk(pgt, addr, size, &walker));
+}
+
+void kvm_pgtable_stage2_destroy_pgd(struct kvm_pgtable *pgt)
+{
+	size_t pgd_sz;
+
 	pgd_sz = kvm_pgd_pages(pgt->ia_bits, pgt->start_level) * PAGE_SIZE;
-	pgt->mm_ops->free_pages_exact(kvm_dereference_pteref(&walker, pgt->pgd), pgd_sz);
+
+	/*
+	 * Since the pgtable is unlinked at this point, and not shared with
+	 * other walkers, safely deference pgd with kvm_dereference_pteref_raw()
+	 */
+	pgt->mm_ops->free_pages_exact(kvm_dereference_pteref_raw(pgt->pgd), pgd_sz);
 	pgt->pgd = NULL;
 }
 
+void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt)
+{
+	kvm_pgtable_stage2_destroy_range(pgt, 0, BIT(pgt->ia_bits));
+	kvm_pgtable_stage2_destroy_pgd(pgt);
+}
+
 void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level)
 {
 	kvm_pteref_t ptep = (kvm_pteref_t)pgtable;
diff --git a/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c b/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c
index 87a54375bd6e..5fd99763b54d 100644
--- a/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c
+++ b/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c
@@ -20,7 +20,7 @@ static bool __is_be(struct kvm_vcpu *vcpu)
 	if (vcpu_mode_is_32bit(vcpu))
 		return !!(read_sysreg_el2(SYS_SPSR) & PSR_AA32_E_BIT);
 
-	return !!(read_sysreg(SCTLR_EL1) & SCTLR_ELx_EE);
+	return !!(read_sysreg_el1(SYS_SCTLR) & SCTLR_ELx_EE);
 }
 
 /*
@@ -63,6 +63,10 @@ int __vgic_v2_perform_cpuif_access(struct kvm_vcpu *vcpu)
 		return -1;
 	}
 
+	/* Handle deactivation as a normal exit */
+	if ((fault_ipa - vgic->vgic_cpu_base) >= GIC_CPU_DEACTIVATE)
+		return 0;
+
 	rd = kvm_vcpu_dabt_get_rd(vcpu);
 	addr  = kvm_vgic_global_state.vcpu_hyp_va;
 	addr += fault_ipa - vgic->vgic_cpu_base;
diff --git a/arch/arm64/kvm/hyp/vgic-v3-sr.c b/arch/arm64/kvm/hyp/vgic-v3-sr.c
index 3f9741e51d41..0b670a033fd8 100644
--- a/arch/arm64/kvm/hyp/vgic-v3-sr.c
+++ b/arch/arm64/kvm/hyp/vgic-v3-sr.c
@@ -14,11 +14,13 @@
 #include <asm/kvm_hyp.h>
 #include <asm/kvm_mmu.h>
 
+#include "../../vgic/vgic.h"
+
 #define vtr_to_max_lr_idx(v)		((v) & 0xf)
 #define vtr_to_nr_pre_bits(v)		((((u32)(v) >> 26) & 7) + 1)
 #define vtr_to_nr_apr_regs(v)		(1 << (vtr_to_nr_pre_bits(v) - 5))
 
-static u64 __gic_v3_get_lr(unsigned int lr)
+u64 __gic_v3_get_lr(unsigned int lr)
 {
 	switch (lr & 0xf) {
 	case 0:
@@ -58,7 +60,7 @@ static u64 __gic_v3_get_lr(unsigned int lr)
 	unreachable();
 }
 
-static void __gic_v3_set_lr(u64 val, int lr)
+void __gic_v3_set_lr(u64 val, int lr)
 {
 	switch (lr & 0xf) {
 	case 0:
@@ -196,6 +198,11 @@ static u32 __vgic_v3_read_ap1rn(int n)
 	return val;
 }
 
+static u64 compute_ich_hcr(struct vgic_v3_cpu_if *cpu_if)
+{
+	return cpu_if->vgic_hcr | vgic_ich_hcr_trap_bits();
+}
+
 void __vgic_v3_save_state(struct vgic_v3_cpu_if *cpu_if)
 {
 	u64 used_lrs = cpu_if->used_lrs;
@@ -212,14 +219,12 @@ void __vgic_v3_save_state(struct vgic_v3_cpu_if *cpu_if)
 		}
 	}
 
-	if (used_lrs || cpu_if->its_vpe.its_vm) {
+	if (used_lrs) {
 		int i;
 		u32 elrsr;
 
 		elrsr = read_gicreg(ICH_ELRSR_EL2);
 
-		write_gicreg(cpu_if->vgic_hcr & ~ICH_HCR_EN, ICH_HCR_EL2);
-
 		for (i = 0; i < used_lrs; i++) {
 			if (elrsr & (1 << i))
 				cpu_if->vgic_lr[i] &= ~ICH_LR_STATE;
@@ -229,6 +234,23 @@ void __vgic_v3_save_state(struct vgic_v3_cpu_if *cpu_if)
 			__gic_v3_set_lr(0, i);
 		}
 	}
+
+	cpu_if->vgic_vmcr = read_gicreg(ICH_VMCR_EL2);
+
+	if (cpu_if->vgic_hcr & ICH_HCR_EL2_LRENPIE) {
+		u64 val = read_gicreg(ICH_HCR_EL2);
+		cpu_if->vgic_hcr &= ~ICH_HCR_EL2_EOIcount;
+		cpu_if->vgic_hcr |= val & ICH_HCR_EL2_EOIcount;
+	}
+
+	write_gicreg(0, ICH_HCR_EL2);
+
+	/*
+	 * Hack alert: On NV, this results in a trap so that the above write
+	 * actually takes effect... No synchronisation is necessary, as we
+	 * only care about the effects when this traps.
+	 */
+	read_gicreg(ICH_MISR_EL2);
 }
 
 void __vgic_v3_restore_state(struct vgic_v3_cpu_if *cpu_if)
@@ -236,12 +258,10 @@ void __vgic_v3_restore_state(struct vgic_v3_cpu_if *cpu_if)
 	u64 used_lrs = cpu_if->used_lrs;
 	int i;
 
-	if (used_lrs || cpu_if->its_vpe.its_vm) {
-		write_gicreg(cpu_if->vgic_hcr, ICH_HCR_EL2);
+	write_gicreg(compute_ich_hcr(cpu_if), ICH_HCR_EL2);
 
-		for (i = 0; i < used_lrs; i++)
-			__gic_v3_set_lr(cpu_if->vgic_lr[i], i);
-	}
+	for (i = 0; i < used_lrs; i++)
+		__gic_v3_set_lr(cpu_if->vgic_lr[i], i);
 
 	/*
 	 * Ensure that writes to the LRs, and on non-VHE systems ensure that
@@ -274,7 +294,7 @@ void __vgic_v3_activate_traps(struct vgic_v3_cpu_if *cpu_if)
 	 * system registers to trap to EL1 (duh), force ICC_SRE_EL1.SRE to 1
 	 * so that the trap bits can take effect. Yes, we *loves* the GIC.
 	 */
-	if (!(cpu_if->vgic_hcr & ICH_HCR_EN)) {
+	if (!(cpu_if->vgic_hcr & ICH_HCR_EL2_En)) {
 		write_gicreg(ICC_SRE_EL1_SRE, ICC_SRE_EL1);
 		isb();
 	} else if (!cpu_if->vgic_sre) {
@@ -295,40 +315,42 @@ void __vgic_v3_activate_traps(struct vgic_v3_cpu_if *cpu_if)
 		}
 	}
 
-	/*
-	 * Prevent the guest from touching the ICC_SRE_EL1 system
-	 * register. Note that this may not have any effect, as
-	 * ICC_SRE_EL2.Enable being RAO/WI is a valid implementation.
-	 */
-	write_gicreg(read_gicreg(ICC_SRE_EL2) & ~ICC_SRE_EL2_ENABLE,
-		     ICC_SRE_EL2);
+	/* Only disable SRE if the host implements the GICv2 interface */
+	if (static_branch_unlikely(&vgic_v3_has_v2_compat)) {
+		/*
+		 * Prevent the guest from touching the ICC_SRE_EL1 system
+		 * register. Note that this may not have any effect, as
+		 * ICC_SRE_EL2.Enable being RAO/WI is a valid implementation.
+		 */
+		write_gicreg(read_gicreg(ICC_SRE_EL2) & ~ICC_SRE_EL2_ENABLE,
+			     ICC_SRE_EL2);
+	}
 
 	/*
-	 * If we need to trap system registers, we must write
-	 * ICH_HCR_EL2 anyway, even if no interrupts are being
-	 * injected. Note that this also applies if we don't expect
-	 * any system register access (no vgic at all).
+	 * If we need to trap system registers, we must write ICH_HCR_EL2
+	 * anyway, even if no interrupts are being injected. Note that this
+	 * also applies if we don't expect any system register access (no
+	 * vgic at all). In any case, no need to provide MI configuration.
 	 */
 	if (static_branch_unlikely(&vgic_v3_cpuif_trap) ||
 	    cpu_if->its_vpe.its_vm || !cpu_if->vgic_sre)
-		write_gicreg(cpu_if->vgic_hcr, ICH_HCR_EL2);
+		write_gicreg(vgic_ich_hcr_trap_bits() | ICH_HCR_EL2_En, ICH_HCR_EL2);
 }
 
 void __vgic_v3_deactivate_traps(struct vgic_v3_cpu_if *cpu_if)
 {
 	u64 val;
 
-	if (!cpu_if->vgic_sre) {
-		cpu_if->vgic_vmcr = read_gicreg(ICH_VMCR_EL2);
-	}
-
-	val = read_gicreg(ICC_SRE_EL2);
-	write_gicreg(val | ICC_SRE_EL2_ENABLE, ICC_SRE_EL2);
+	/* Only restore SRE if the host implements the GICv2 interface */
+	if (static_branch_unlikely(&vgic_v3_has_v2_compat)) {
+		val = read_gicreg(ICC_SRE_EL2);
+		write_gicreg(val | ICC_SRE_EL2_ENABLE, ICC_SRE_EL2);
 
-	if (!cpu_if->vgic_sre) {
-		/* Make sure ENABLE is set at EL2 before setting SRE at EL1 */
-		isb();
-		write_gicreg(1, ICC_SRE_EL1);
+		if (!cpu_if->vgic_sre) {
+			/* Make sure ENABLE is set at EL2 before setting SRE at EL1 */
+			isb();
+			write_gicreg(1, ICC_SRE_EL1);
+		}
 	}
 
 	/*
@@ -340,7 +362,7 @@ void __vgic_v3_deactivate_traps(struct vgic_v3_cpu_if *cpu_if)
 		write_gicreg(0, ICH_HCR_EL2);
 }
 
-static void __vgic_v3_save_aprs(struct vgic_v3_cpu_if *cpu_if)
+void __vgic_v3_save_aprs(struct vgic_v3_cpu_if *cpu_if)
 {
 	u64 val;
 	u32 nr_pre_bits;
@@ -423,29 +445,43 @@ void __vgic_v3_init_lrs(void)
  */
 u64 __vgic_v3_get_gic_config(void)
 {
-	u64 val, sre = read_gicreg(ICC_SRE_EL1);
+	u64 val, sre;
 	unsigned long flags = 0;
 
 	/*
-	 * To check whether we have a MMIO-based (GICv2 compatible)
-	 * CPU interface, we need to disable the system register
-	 * view. To do that safely, we have to prevent any interrupt
-	 * from firing (which would be deadly).
-	 *
-	 * Note that this only makes sense on VHE, as interrupts are
-	 * already masked for nVHE as part of the exception entry to
-	 * EL2.
+	 * In compat mode, we cannot access ICC_SRE_EL1 at any EL
+	 * other than EL1 itself; just return the
+	 * ICH_VTR_EL2. ICC_IDR0_EL1 is only implemented on a GICv5
+	 * system, so we first check if we have GICv5 support.
 	 */
-	if (has_vhe())
-		flags = local_daif_save();
+	if (cpus_have_final_cap(ARM64_HAS_GICV5_CPUIF))
+		return read_gicreg(ICH_VTR_EL2);
 
+	sre = read_gicreg(ICC_SRE_EL1);
 	/*
+	 * To check whether we have a MMIO-based (GICv2 compatible)
+	 * CPU interface, we need to disable the system register
+	 * view.
+	 *
 	 * Table 11-2 "Permitted ICC_SRE_ELx.SRE settings" indicates
 	 * that to be able to set ICC_SRE_EL1.SRE to 0, all the
 	 * interrupt overrides must be set. You've got to love this.
+	 *
+	 * As we always run VHE with HCR_xMO set, no extra xMO
+	 * manipulation is required in that case.
+	 *
+	 * To safely disable SRE, we have to prevent any interrupt
+	 * from firing (which would be deadly). This only makes sense
+	 * on VHE, as interrupts are already masked for nVHE as part
+	 * of the exception entry to EL2.
 	 */
-	sysreg_clear_set(hcr_el2, 0, HCR_AMO | HCR_FMO | HCR_IMO);
-	isb();
+	if (has_vhe()) {
+		flags = local_daif_save();
+	} else {
+		sysreg_clear_set_hcr(0, HCR_AMO | HCR_FMO | HCR_IMO);
+		isb();
+	}
+
 	write_gicreg(0, ICC_SRE_EL1);
 	isb();
 
@@ -453,11 +489,13 @@ u64 __vgic_v3_get_gic_config(void)
 
 	write_gicreg(sre, ICC_SRE_EL1);
 	isb();
-	sysreg_clear_set(hcr_el2, HCR_AMO | HCR_FMO | HCR_IMO, 0);
-	isb();
 
-	if (has_vhe())
+	if (has_vhe()) {
 		local_daif_restore(flags);
+	} else {
+		sysreg_clear_set_hcr(HCR_AMO | HCR_FMO | HCR_IMO, 0);
+		isb();
+	}
 
 	val  = (val & ICC_SRE_EL1_SRE) ? 0 : (1ULL << 63);
 	val |= read_gicreg(ICH_VTR_EL2);
@@ -465,6 +503,16 @@ u64 __vgic_v3_get_gic_config(void)
 	return val;
 }
 
+static void __vgic_v3_compat_mode_enable(void)
+{
+	if (!cpus_have_final_cap(ARM64_HAS_GICV5_CPUIF))
+		return;
+
+	sysreg_clear_set_s(SYS_ICH_VCTLR_EL2, 0, ICH_VCTLR_EL2_V3);
+	/* Wait for V3 to become enabled */
+	isb();
+}
+
 static u64 __vgic_v3_read_vmcr(void)
 {
 	return read_gicreg(ICH_VMCR_EL2);
@@ -475,15 +523,10 @@ static void __vgic_v3_write_vmcr(u32 vmcr)
 	write_gicreg(vmcr, ICH_VMCR_EL2);
 }
 
-void __vgic_v3_save_vmcr_aprs(struct vgic_v3_cpu_if *cpu_if)
-{
-	__vgic_v3_save_aprs(cpu_if);
-	if (cpu_if->vgic_sre)
-		cpu_if->vgic_vmcr = __vgic_v3_read_vmcr();
-}
-
 void __vgic_v3_restore_vmcr_aprs(struct vgic_v3_cpu_if *cpu_if)
 {
+	__vgic_v3_compat_mode_enable();
+
 	/*
 	 * If dealing with a GICv2 emulation on GICv3, VMCR_EL2.VFIQen
 	 * is dependent on ICC_SRE_EL1.SRE, and we have to perform the
@@ -752,11 +795,11 @@ static void __vgic_v3_bump_eoicount(void)
 	u32 hcr;
 
 	hcr = read_gicreg(ICH_HCR_EL2);
-	hcr += 1 << ICH_HCR_EOIcount_SHIFT;
+	hcr += 1 << ICH_HCR_EL2_EOIcount_SHIFT;
 	write_gicreg(hcr, ICH_HCR_EL2);
 }
 
-static void __vgic_v3_write_dir(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+static int ___vgic_v3_write_dir(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
 {
 	u32 vid = vcpu_get_reg(vcpu, rt);
 	u64 lr_val;
@@ -764,19 +807,25 @@ static void __vgic_v3_write_dir(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
 
 	/* EOImode == 0, nothing to be done here */
 	if (!(vmcr & ICH_VMCR_EOIM_MASK))
-		return;
+		return 1;
 
 	/* No deactivate to be performed on an LPI */
 	if (vid >= VGIC_MIN_LPI)
-		return;
+		return 1;
 
 	lr = __vgic_v3_find_active_lr(vcpu, vid, &lr_val);
-	if (lr == -1) {
-		__vgic_v3_bump_eoicount();
-		return;
+	if (lr != -1) {
+		__vgic_v3_clear_active_lr(lr, lr_val);
+		return 1;
 	}
 
-	__vgic_v3_clear_active_lr(lr, lr_val);
+	return 0;
+}
+
+static void __vgic_v3_write_dir(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	if (!___vgic_v3_write_dir(vcpu, vmcr, rt))
+		__vgic_v3_bump_eoicount();
 }
 
 static void __vgic_v3_write_eoir(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
@@ -1044,7 +1093,7 @@ static bool __vgic_v3_check_trap_forwarding(struct kvm_vcpu *vcpu,
 {
 	u64 ich_hcr;
 
-	if (!vcpu_has_nv(vcpu) || is_hyp_ctxt(vcpu))
+	if (!is_nested_ctxt(vcpu))
 		return false;
 
 	ich_hcr = __vcpu_sys_reg(vcpu, ICH_HCR_EL2);
@@ -1052,11 +1101,11 @@ static bool __vgic_v3_check_trap_forwarding(struct kvm_vcpu *vcpu,
 	switch (sysreg) {
 	case SYS_ICC_IGRPEN0_EL1:
 		if (is_read &&
-		    (__vcpu_sys_reg(vcpu, HFGRTR_EL2) & HFGxTR_EL2_ICC_IGRPENn_EL1))
+		    (__vcpu_sys_reg(vcpu, HFGRTR_EL2) & HFGRTR_EL2_ICC_IGRPENn_EL1))
 			return true;
 
 		if (!is_read &&
-		    (__vcpu_sys_reg(vcpu, HFGWTR_EL2) & HFGxTR_EL2_ICC_IGRPENn_EL1))
+		    (__vcpu_sys_reg(vcpu, HFGWTR_EL2) & HFGWTR_EL2_ICC_IGRPENn_EL1))
 			return true;
 
 		fallthrough;
@@ -1069,15 +1118,15 @@ static bool __vgic_v3_check_trap_forwarding(struct kvm_vcpu *vcpu,
 	case SYS_ICC_EOIR0_EL1:
 	case SYS_ICC_HPPIR0_EL1:
 	case SYS_ICC_IAR0_EL1:
-		return ich_hcr & ICH_HCR_TALL0;
+		return ich_hcr & ICH_HCR_EL2_TALL0;
 
 	case SYS_ICC_IGRPEN1_EL1:
 		if (is_read &&
-		    (__vcpu_sys_reg(vcpu, HFGRTR_EL2) & HFGxTR_EL2_ICC_IGRPENn_EL1))
+		    (__vcpu_sys_reg(vcpu, HFGRTR_EL2) & HFGRTR_EL2_ICC_IGRPENn_EL1))
 			return true;
 
 		if (!is_read &&
-		    (__vcpu_sys_reg(vcpu, HFGWTR_EL2) & HFGxTR_EL2_ICC_IGRPENn_EL1))
+		    (__vcpu_sys_reg(vcpu, HFGWTR_EL2) & HFGWTR_EL2_ICC_IGRPENn_EL1))
 			return true;
 
 		fallthrough;
@@ -1090,10 +1139,10 @@ static bool __vgic_v3_check_trap_forwarding(struct kvm_vcpu *vcpu,
 	case SYS_ICC_EOIR1_EL1:
 	case SYS_ICC_HPPIR1_EL1:
 	case SYS_ICC_IAR1_EL1:
-		return ich_hcr & ICH_HCR_TALL1;
+		return ich_hcr & ICH_HCR_EL2_TALL1;
 
 	case SYS_ICC_DIR_EL1:
-		if (ich_hcr & ICH_HCR_TDIR)
+		if (ich_hcr & ICH_HCR_EL2_TDIR)
 			return true;
 
 		fallthrough;
@@ -1101,7 +1150,7 @@ static bool __vgic_v3_check_trap_forwarding(struct kvm_vcpu *vcpu,
 	case SYS_ICC_RPR_EL1:
 	case SYS_ICC_CTLR_EL1:
 	case SYS_ICC_PMR_EL1:
-		return ich_hcr & ICH_HCR_TC;
+		return ich_hcr & ICH_HCR_EL2_TC;
 
 	default:
 		return false;
@@ -1211,6 +1260,21 @@ int __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu)
 	case SYS_ICC_DIR_EL1:
 		if (unlikely(is_read))
 			return 0;
+		/*
+		 * Full exit if required to handle overflow deactivation,
+		 * unless we can emulate it in the LRs (likely the majority
+		 * of the cases).
+		 */
+		if (vcpu->arch.vgic_cpu.vgic_v3.vgic_hcr & ICH_HCR_EL2_TDIR) {
+			int ret;
+
+			ret = ___vgic_v3_write_dir(vcpu, __vgic_v3_read_vmcr(),
+						   kvm_vcpu_sys_get_rt(vcpu));
+			if (ret)
+				__kvm_skip_instr(vcpu);
+
+			return ret;
+		}
 		fn = __vgic_v3_write_dir;
 		break;
 	case SYS_ICC_RPR_EL1:
diff --git a/arch/arm64/kvm/hyp/vhe/debug-sr.c b/arch/arm64/kvm/hyp/vhe/debug-sr.c
index 289689b2682d..0100339b09e0 100644
--- a/arch/arm64/kvm/hyp/vhe/debug-sr.c
+++ b/arch/arm64/kvm/hyp/vhe/debug-sr.c
@@ -19,8 +19,3 @@ void __debug_switch_to_host(struct kvm_vcpu *vcpu)
 {
 	__debug_switch_to_host_common(vcpu);
 }
-
-u64 __kvm_get_mdcr_el2(void)
-{
-	return read_sysreg(mdcr_el2);
-}
diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
index 80581b1c3995..9984c492305a 100644
--- a/arch/arm64/kvm/hyp/vhe/switch.c
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@@ -43,97 +43,71 @@ DEFINE_PER_CPU(unsigned long, kvm_hyp_vector);
  *
  * - API/APK: they are already accounted for by vcpu_load(), and can
  *   only take effect across a load/put cycle (such as ERET)
+ *
+ * - FIEN: no way we let a guest have access to the RAS "Common Fault
+ *   Injection" thing, whatever that does
  */
-#define NV_HCR_GUEST_EXCLUDE	(HCR_TGE | HCR_API | HCR_APK)
+#define NV_HCR_GUEST_EXCLUDE	(HCR_TGE | HCR_API | HCR_APK | HCR_FIEN)
 
 static u64 __compute_hcr(struct kvm_vcpu *vcpu)
 {
-	u64 hcr = vcpu->arch.hcr_el2;
+	u64 guest_hcr, hcr = vcpu->arch.hcr_el2;
 
 	if (!vcpu_has_nv(vcpu))
 		return hcr;
 
+	/*
+	 * We rely on the invariant that a vcpu entered from HYP
+	 * context must also exit in the same context, as only an ERET
+	 * instruction can kick us out of it, and we obviously trap
+	 * that sucker. PSTATE.M will get fixed-up on exit.
+	 */
 	if (is_hyp_ctxt(vcpu)) {
+		host_data_set_flag(VCPU_IN_HYP_CONTEXT);
+
 		hcr |= HCR_NV | HCR_NV2 | HCR_AT | HCR_TTLB;
 
 		if (!vcpu_el2_e2h_is_set(vcpu))
 			hcr |= HCR_NV1;
 
-		write_sysreg_s(vcpu->arch.ctxt.vncr_array, SYS_VNCR_EL2);
-	}
-
-	return hcr | (__vcpu_sys_reg(vcpu, HCR_EL2) & ~NV_HCR_GUEST_EXCLUDE);
-}
-
-static void __activate_cptr_traps(struct kvm_vcpu *vcpu)
-{
-	u64 cptr;
-
-	/*
-	 * With VHE (HCR.E2H == 1), accesses to CPACR_EL1 are routed to
-	 * CPTR_EL2. In general, CPACR_EL1 has the same layout as CPTR_EL2,
-	 * except for some missing controls, such as TAM.
-	 * In this case, CPTR_EL2.TAM has the same position with or without
-	 * VHE (HCR.E2H == 1) which allows us to use here the CPTR_EL2.TAM
-	 * shift value for trapping the AMU accesses.
-	 */
-	u64 val = CPACR_ELx_TTA | CPTR_EL2_TAM;
+		/*
+		 * Nothing in HCR_EL2 should impact running in hypervisor
+		 * context, apart from bits we have defined as RESx (E2H,
+		 * HCD and co), or that cannot be set directly (the EXCLUDE
+		 * bits). Given that we OR the guest's view with the host's,
+		 * we can use the 0 value as the starting point, and only
+		 * use the config-driven RES1 bits.
+		 */
+		guest_hcr = kvm_vcpu_apply_reg_masks(vcpu, HCR_EL2, 0);
 
-	if (guest_owns_fp_regs()) {
-		val |= CPACR_ELx_FPEN;
-		if (vcpu_has_sve(vcpu))
-			val |= CPACR_ELx_ZEN;
+		write_sysreg_s(vcpu->arch.ctxt.vncr_array, SYS_VNCR_EL2);
 	} else {
-		__activate_traps_fpsimd32(vcpu);
-	}
+		host_data_clear_flag(VCPU_IN_HYP_CONTEXT);
 
-	if (!vcpu_has_nv(vcpu))
-		goto write;
+		guest_hcr = __vcpu_sys_reg(vcpu, HCR_EL2);
+		if (guest_hcr & HCR_NV) {
+			u64 va = __fix_to_virt(vncr_fixmap(smp_processor_id()));
 
-	/*
-	 * The architecture is a bit crap (what a surprise): an EL2 guest
-	 * writing to CPTR_EL2 via CPACR_EL1 can't set any of TCPAC or TTA,
-	 * as they are RES0 in the guest's view. To work around it, trap the
-	 * sucker using the very same bit it can't set...
-	 */
-	if (vcpu_el2_e2h_is_set(vcpu) && is_hyp_ctxt(vcpu))
-		val |= CPTR_EL2_TCPAC;
+			/* Inherit the low bits from the actual register */
+			va |= __vcpu_sys_reg(vcpu, VNCR_EL2) & GENMASK(PAGE_SHIFT - 1, 0);
+			write_sysreg_s(va, SYS_VNCR_EL2);
 
-	/*
-	 * Layer the guest hypervisor's trap configuration on top of our own if
-	 * we're in a nested context.
-	 */
-	if (is_hyp_ctxt(vcpu))
-		goto write;
-
-	cptr = vcpu_sanitised_cptr_el2(vcpu);
-
-	/*
-	 * Pay attention, there's some interesting detail here.
-	 *
-	 * The CPTR_EL2.xEN fields are 2 bits wide, although there are only two
-	 * meaningful trap states when HCR_EL2.TGE = 0 (running a nested guest):
-	 *
-	 *  - CPTR_EL2.xEN = x0, traps are enabled
-	 *  - CPTR_EL2.xEN = x1, traps are disabled
-	 *
-	 * In other words, bit[0] determines if guest accesses trap or not. In
-	 * the interest of simplicity, clear the entire field if the guest
-	 * hypervisor has traps enabled to dispel any illusion of something more
-	 * complicated taking place.
-	 */
-	if (!(SYS_FIELD_GET(CPACR_ELx, FPEN, cptr) & BIT(0)))
-		val &= ~CPACR_ELx_FPEN;
-	if (!(SYS_FIELD_GET(CPACR_ELx, ZEN, cptr) & BIT(0)))
-		val &= ~CPACR_ELx_ZEN;
+			/* Force NV2 in case the guest is forgetful... */
+			guest_hcr |= HCR_NV2;
+		}
 
-	if (kvm_has_feat(vcpu->kvm, ID_AA64MMFR3_EL1, S2POE, IMP))
-		val |= cptr & CPACR_ELx_E0POE;
+		/*
+		 * Exclude the guest's TWED configuration if it hasn't set TWE
+		 * to avoid potentially delaying traps for the host.
+		 */
+		if (!(guest_hcr & HCR_TWE))
+			guest_hcr &= ~(HCR_EL2_TWEDEn | HCR_EL2_TWEDEL);
+	}
 
-	val |= cptr & CPTR_EL2_TCPAC;
+	BUG_ON(host_data_test_flag(VCPU_IN_HYP_CONTEXT) &&
+	       host_data_test_flag(L1_VNCR_MAPPED));
 
-write:
-	write_sysreg(val, cpacr_el1);
+	return hcr | (guest_hcr & ~NV_HCR_GUEST_EXCLUDE);
 }
 
 static void __activate_traps(struct kvm_vcpu *vcpu)
@@ -174,7 +148,7 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 
 	___deactivate_traps(vcpu);
 
-	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
+	write_sysreg_hcr(HCR_HOST_VHE_FLAGS);
 
 	if (has_cntpoff()) {
 		struct timer_map map;
@@ -188,9 +162,9 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 		 */
 		val = read_sysreg_el0(SYS_CNTP_CVAL);
 		if (map.direct_ptimer == vcpu_ptimer(vcpu))
-			__vcpu_sys_reg(vcpu, CNTP_CVAL_EL0) = val;
+			__vcpu_assign_sys_reg(vcpu, CNTP_CVAL_EL0, val);
 		if (map.direct_ptimer == vcpu_hptimer(vcpu))
-			__vcpu_sys_reg(vcpu, CNTHP_CVAL_EL2) = val;
+			__vcpu_assign_sys_reg(vcpu, CNTHP_CVAL_EL2, val);
 
 		offset = read_sysreg_s(SYS_CNTPOFF_EL2);
 
@@ -207,7 +181,7 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 	 */
 	asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_SPECULATIVE_AT));
 
-	kvm_reset_cptr_el2(vcpu);
+	__deactivate_cptr_traps(vcpu);
 
 	if (!arm64_kernel_unmapped_at_el0())
 		host_vectors = __this_cpu_read(this_cpu_vector);
@@ -256,6 +230,110 @@ void kvm_vcpu_put_vhe(struct kvm_vcpu *vcpu)
 	host_data_ptr(host_ctxt)->__hyp_running_vcpu = NULL;
 }
 
+static u64 compute_emulated_cntx_ctl_el0(struct kvm_vcpu *vcpu,
+					 enum vcpu_sysreg reg)
+{
+	unsigned long ctl;
+	u64 cval, cnt;
+	bool stat;
+
+	switch (reg) {
+	case CNTP_CTL_EL0:
+		cval = __vcpu_sys_reg(vcpu, CNTP_CVAL_EL0);
+		ctl  = __vcpu_sys_reg(vcpu, CNTP_CTL_EL0);
+		cnt  = compute_counter_value(vcpu_ptimer(vcpu));
+		break;
+	case CNTV_CTL_EL0:
+		cval = __vcpu_sys_reg(vcpu, CNTV_CVAL_EL0);
+		ctl  = __vcpu_sys_reg(vcpu, CNTV_CTL_EL0);
+		cnt  = compute_counter_value(vcpu_vtimer(vcpu));
+		break;
+	default:
+		BUG();
+	}
+
+	stat = cval <= cnt;
+	__assign_bit(__ffs(ARCH_TIMER_CTRL_IT_STAT), &ctl, stat);
+
+	return ctl;
+}
+
+static bool kvm_hyp_handle_timer(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	u64 esr, val;
+
+	/*
+	 * Having FEAT_ECV allows for a better quality of timer emulation.
+	 * However, this comes at a huge cost in terms of traps. Try and
+	 * satisfy the reads from guest's hypervisor context without
+	 * returning to the kernel if we can.
+	 */
+	if (!is_hyp_ctxt(vcpu))
+		return false;
+
+	esr = kvm_vcpu_get_esr(vcpu);
+	if ((esr & ESR_ELx_SYS64_ISS_DIR_MASK) != ESR_ELx_SYS64_ISS_DIR_READ)
+		return false;
+
+	switch (esr_sys64_to_sysreg(esr)) {
+	case SYS_CNTP_CTL_EL02:
+		val = compute_emulated_cntx_ctl_el0(vcpu, CNTP_CTL_EL0);
+		break;
+	case SYS_CNTP_CTL_EL0:
+		if (vcpu_el2_e2h_is_set(vcpu))
+			val = read_sysreg_el0(SYS_CNTP_CTL);
+		else
+			val = compute_emulated_cntx_ctl_el0(vcpu, CNTP_CTL_EL0);
+		break;
+	case SYS_CNTP_CVAL_EL02:
+		val = __vcpu_sys_reg(vcpu, CNTP_CVAL_EL0);
+		break;
+	case SYS_CNTP_CVAL_EL0:
+		if (vcpu_el2_e2h_is_set(vcpu)) {
+			val = read_sysreg_el0(SYS_CNTP_CVAL);
+
+			if (!has_cntpoff())
+				val -= timer_get_offset(vcpu_hptimer(vcpu));
+		} else {
+			val = __vcpu_sys_reg(vcpu, CNTP_CVAL_EL0);
+		}
+		break;
+	case SYS_CNTPCT_EL0:
+	case SYS_CNTPCTSS_EL0:
+		val = compute_counter_value(vcpu_hptimer(vcpu));
+		break;
+	case SYS_CNTV_CTL_EL02:
+		val = compute_emulated_cntx_ctl_el0(vcpu, CNTV_CTL_EL0);
+		break;
+	case SYS_CNTV_CTL_EL0:
+		if (vcpu_el2_e2h_is_set(vcpu))
+			val = read_sysreg_el0(SYS_CNTV_CTL);
+		else
+			val = compute_emulated_cntx_ctl_el0(vcpu, CNTV_CTL_EL0);
+		break;
+	case SYS_CNTV_CVAL_EL02:
+		val = __vcpu_sys_reg(vcpu, CNTV_CVAL_EL0);
+		break;
+	case SYS_CNTV_CVAL_EL0:
+		if (vcpu_el2_e2h_is_set(vcpu))
+			val = read_sysreg_el0(SYS_CNTV_CVAL);
+		else
+			val = __vcpu_sys_reg(vcpu, CNTV_CVAL_EL0);
+		break;
+	case SYS_CNTVCT_EL0:
+	case SYS_CNTVCTSS_EL0:
+		val = compute_counter_value(vcpu_hvtimer(vcpu));
+		break;
+	default:
+		return false;
+	}
+
+	vcpu_set_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu), val);
+	__kvm_skip_instr(vcpu);
+
+	return true;
+}
+
 static bool kvm_hyp_handle_eret(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
 	u64 esr = kvm_vcpu_get_esr(vcpu);
@@ -309,14 +387,6 @@ static bool kvm_hyp_handle_eret(struct kvm_vcpu *vcpu, u64 *exit_code)
 	return true;
 }
 
-static void kvm_hyp_save_fpsimd_host(struct kvm_vcpu *vcpu)
-{
-	__fpsimd_save_state(*host_data_ptr(fpsimd_state));
-
-	if (kvm_has_fpmr(vcpu->kvm))
-		**host_data_ptr(fpmr_ptr) = read_sysreg_s(SYS_FPMR);
-}
-
 static bool kvm_hyp_handle_tlbi_el2(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
 	int ret = -EINVAL;
@@ -353,6 +423,14 @@ static bool kvm_hyp_handle_tlbi_el2(struct kvm_vcpu *vcpu, u64 *exit_code)
 	if (ret)
 		return false;
 
+	/*
+	 * If we have to check for any VNCR mapping being invalidated,
+	 * go back to the slow path for further processing.
+	 */
+	if (vcpu_el2_e2h_is_set(vcpu) && vcpu_el2_tge_is_set(vcpu) &&
+	    atomic_read(&vcpu->kvm->arch.vncr_map_count))
+		return false;
+
 	__kvm_skip_instr(vcpu);
 
 	return true;
@@ -409,6 +487,9 @@ static bool kvm_hyp_handle_sysreg_vhe(struct kvm_vcpu *vcpu, u64 *exit_code)
 	if (kvm_hyp_handle_tlbi_el2(vcpu, exit_code))
 		return true;
 
+	if (kvm_hyp_handle_timer(vcpu, exit_code))
+		return true;
+
 	if (kvm_hyp_handle_cpacr_el1(vcpu, exit_code))
 		return true;
 
@@ -418,6 +499,25 @@ static bool kvm_hyp_handle_sysreg_vhe(struct kvm_vcpu *vcpu, u64 *exit_code)
 	return kvm_hyp_handle_sysreg(vcpu, exit_code);
 }
 
+static bool kvm_hyp_handle_impdef(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	u64 iss;
+
+	if (!cpus_have_final_cap(ARM64_WORKAROUND_PMUV3_IMPDEF_TRAPS))
+		return false;
+
+	/*
+	 * Compute a synthetic ESR for a sysreg trap. Conveniently, AFSR1_EL2
+	 * is populated with a correct ISS for a sysreg trap. These fruity
+	 * parts are 64bit only, so unconditionally set IL.
+	 */
+	iss = ESR_ELx_ISS(read_sysreg_s(SYS_AFSR1_EL2));
+	vcpu->arch.fault.esr_el2 = FIELD_PREP(ESR_ELx_EC_MASK, ESR_ELx_EC_SYS64) |
+				   FIELD_PREP(ESR_ELx_ISS_MASK, iss) |
+				   ESR_ELx_IL;
+	return false;
+}
+
 static const exit_handler_fn hyp_exit_handlers[] = {
 	[0 ... ESR_ELx_EC_MAX]		= NULL,
 	[ESR_ELx_EC_CP15_32]		= kvm_hyp_handle_cp15_32,
@@ -429,20 +529,23 @@ static const exit_handler_fn hyp_exit_handlers[] = {
 	[ESR_ELx_EC_WATCHPT_LOW]	= kvm_hyp_handle_watchpt_low,
 	[ESR_ELx_EC_ERET]		= kvm_hyp_handle_eret,
 	[ESR_ELx_EC_MOPS]		= kvm_hyp_handle_mops,
+
+	/* Apple shenanigans */
+	[0x3F]				= kvm_hyp_handle_impdef,
 };
 
-static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu)
+static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 {
-	return hyp_exit_handlers;
-}
+	synchronize_vcpu_pstate(vcpu, exit_code);
 
-static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code)
-{
 	/*
 	 * If we were in HYP context on entry, adjust the PSTATE view
-	 * so that the usual helpers work correctly.
+	 * so that the usual helpers work correctly. This enforces our
+	 * invariant that the guest's HYP context status is preserved
+	 * across a run.
 	 */
-	if (vcpu_has_nv(vcpu) && (read_sysreg(hcr_el2) & HCR_NV)) {
+	if (vcpu_has_nv(vcpu) &&
+	    unlikely(host_data_test_flag(VCPU_IN_HYP_CONTEXT))) {
 		u64 mode = *vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT);
 
 		switch (mode) {
@@ -457,6 +560,12 @@ static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code)
 		*vcpu_cpsr(vcpu) &= ~(PSR_MODE_MASK | PSR_MODE32_BIT);
 		*vcpu_cpsr(vcpu) |= mode;
 	}
+
+	/* Apply extreme paranoia! */
+	BUG_ON(vcpu_has_nv(vcpu) &&
+	       !!host_data_test_flag(VCPU_IN_HYP_CONTEXT) != is_hyp_ctxt(vcpu));
+
+	return __fixup_guest_exit(vcpu, exit_code, hyp_exit_handlers);
 }
 
 /* Switch to the guest for VHE systems running in EL2 */
@@ -469,6 +578,8 @@ static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
 	host_ctxt = host_data_ptr(host_ctxt);
 	guest_ctxt = &vcpu->arch.ctxt;
 
+	fpsimd_lazy_switch_to_guest(vcpu);
+
 	sysreg_save_host_state_vhe(host_ctxt);
 
 	/*
@@ -497,11 +608,21 @@ static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
 
 	sysreg_restore_host_state_vhe(host_ctxt);
 
+	__debug_switch_to_host(vcpu);
+
+	/*
+	 * Ensure that all system register writes above have taken effect
+	 * before returning to the host. In VHE mode, CPTR traps for
+	 * FPSIMD/SVE/SME also apply to EL2, so FPSIMD/SVE/SME state must be
+	 * manipulated after the ISB.
+	 */
+	isb();
+
+	fpsimd_lazy_switch_to_host(vcpu);
+
 	if (guest_owns_fp_regs())
 		__fpsimd_save_fpexc32(vcpu);
 
-	__debug_switch_to_host(vcpu);
-
 	return exit_code;
 }
 NOKPROBE_SYMBOL(__kvm_vcpu_run_vhe);
@@ -531,12 +652,6 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 	 */
 	local_daif_restore(DAIF_PROCCTX_NOIRQ);
 
-	/*
-	 * When we exit from the guest we change a number of CPU configuration
-	 * parameters, such as traps.  We rely on the isb() in kvm_call_hyp*()
-	 * to make sure these changes take effect before running the host or
-	 * additional guests.
-	 */
 	return ret;
 }
 
diff --git a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
index 5f78a39053a7..f28c6cf4fe1b 100644
--- a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
+++ b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
@@ -18,17 +18,17 @@
 static void __sysreg_save_vel2_state(struct kvm_vcpu *vcpu)
 {
 	/* These registers are common with EL1 */
-	__vcpu_sys_reg(vcpu, PAR_EL1)	= read_sysreg(par_el1);
-	__vcpu_sys_reg(vcpu, TPIDR_EL1)	= read_sysreg(tpidr_el1);
-
-	__vcpu_sys_reg(vcpu, ESR_EL2)	= read_sysreg_el1(SYS_ESR);
-	__vcpu_sys_reg(vcpu, AFSR0_EL2)	= read_sysreg_el1(SYS_AFSR0);
-	__vcpu_sys_reg(vcpu, AFSR1_EL2)	= read_sysreg_el1(SYS_AFSR1);
-	__vcpu_sys_reg(vcpu, FAR_EL2)	= read_sysreg_el1(SYS_FAR);
-	__vcpu_sys_reg(vcpu, MAIR_EL2)	= read_sysreg_el1(SYS_MAIR);
-	__vcpu_sys_reg(vcpu, VBAR_EL2)	= read_sysreg_el1(SYS_VBAR);
-	__vcpu_sys_reg(vcpu, CONTEXTIDR_EL2) = read_sysreg_el1(SYS_CONTEXTIDR);
-	__vcpu_sys_reg(vcpu, AMAIR_EL2)	= read_sysreg_el1(SYS_AMAIR);
+	__vcpu_assign_sys_reg(vcpu, PAR_EL1,	 read_sysreg(par_el1));
+	__vcpu_assign_sys_reg(vcpu, TPIDR_EL1,	 read_sysreg(tpidr_el1));
+
+	__vcpu_assign_sys_reg(vcpu, ESR_EL2,	 read_sysreg_el1(SYS_ESR));
+	__vcpu_assign_sys_reg(vcpu, AFSR0_EL2,	 read_sysreg_el1(SYS_AFSR0));
+	__vcpu_assign_sys_reg(vcpu, AFSR1_EL2,	 read_sysreg_el1(SYS_AFSR1));
+	__vcpu_assign_sys_reg(vcpu, FAR_EL2,	 read_sysreg_el1(SYS_FAR));
+	__vcpu_assign_sys_reg(vcpu, MAIR_EL2,	 read_sysreg_el1(SYS_MAIR));
+	__vcpu_assign_sys_reg(vcpu, VBAR_EL2,	 read_sysreg_el1(SYS_VBAR));
+	__vcpu_assign_sys_reg(vcpu, CONTEXTIDR_EL2, read_sysreg_el1(SYS_CONTEXTIDR));
+	__vcpu_assign_sys_reg(vcpu, AMAIR_EL2,	 read_sysreg_el1(SYS_AMAIR));
 
 	/*
 	 * In VHE mode those registers are compatible between EL1 and EL2,
@@ -46,21 +46,21 @@ static void __sysreg_save_vel2_state(struct kvm_vcpu *vcpu)
 		 * are always trapped, ensuring that the in-memory
 		 * copy is always up-to-date. A small blessing...
 		 */
-		__vcpu_sys_reg(vcpu, SCTLR_EL2)	= read_sysreg_el1(SYS_SCTLR);
-		__vcpu_sys_reg(vcpu, TTBR0_EL2)	= read_sysreg_el1(SYS_TTBR0);
-		__vcpu_sys_reg(vcpu, TTBR1_EL2)	= read_sysreg_el1(SYS_TTBR1);
-		__vcpu_sys_reg(vcpu, TCR_EL2)	= read_sysreg_el1(SYS_TCR);
+		__vcpu_assign_sys_reg(vcpu, SCTLR_EL2,	 read_sysreg_el1(SYS_SCTLR));
+		__vcpu_assign_sys_reg(vcpu, TTBR0_EL2,	 read_sysreg_el1(SYS_TTBR0));
+		__vcpu_assign_sys_reg(vcpu, TTBR1_EL2,	 read_sysreg_el1(SYS_TTBR1));
+		__vcpu_assign_sys_reg(vcpu, TCR_EL2,	 read_sysreg_el1(SYS_TCR));
 
 		if (ctxt_has_tcrx(&vcpu->arch.ctxt)) {
-			__vcpu_sys_reg(vcpu, TCR2_EL2) = read_sysreg_el1(SYS_TCR2);
+			__vcpu_assign_sys_reg(vcpu, TCR2_EL2, read_sysreg_el1(SYS_TCR2));
 
 			if (ctxt_has_s1pie(&vcpu->arch.ctxt)) {
-				__vcpu_sys_reg(vcpu, PIRE0_EL2) = read_sysreg_el1(SYS_PIRE0);
-				__vcpu_sys_reg(vcpu, PIR_EL2) = read_sysreg_el1(SYS_PIR);
+				__vcpu_assign_sys_reg(vcpu, PIRE0_EL2, read_sysreg_el1(SYS_PIRE0));
+				__vcpu_assign_sys_reg(vcpu, PIR_EL2, read_sysreg_el1(SYS_PIR));
 			}
 
 			if (ctxt_has_s1poe(&vcpu->arch.ctxt))
-				__vcpu_sys_reg(vcpu, POR_EL2) = read_sysreg_el1(SYS_POR);
+				__vcpu_assign_sys_reg(vcpu, POR_EL2, read_sysreg_el1(SYS_POR));
 		}
 
 		/*
@@ -70,13 +70,16 @@ static void __sysreg_save_vel2_state(struct kvm_vcpu *vcpu)
 		 */
 		val = read_sysreg_el1(SYS_CNTKCTL);
 		val &= CNTKCTL_VALID_BITS;
-		__vcpu_sys_reg(vcpu, CNTHCTL_EL2) &= ~CNTKCTL_VALID_BITS;
-		__vcpu_sys_reg(vcpu, CNTHCTL_EL2) |= val;
+		__vcpu_rmw_sys_reg(vcpu, CNTHCTL_EL2, &=, ~CNTKCTL_VALID_BITS);
+		__vcpu_rmw_sys_reg(vcpu, CNTHCTL_EL2, |=, val);
 	}
 
-	__vcpu_sys_reg(vcpu, SP_EL2)	= read_sysreg(sp_el1);
-	__vcpu_sys_reg(vcpu, ELR_EL2)	= read_sysreg_el1(SYS_ELR);
-	__vcpu_sys_reg(vcpu, SPSR_EL2)	= read_sysreg_el1(SYS_SPSR);
+	__vcpu_assign_sys_reg(vcpu, SP_EL2,	 read_sysreg(sp_el1));
+	__vcpu_assign_sys_reg(vcpu, ELR_EL2,	 read_sysreg_el1(SYS_ELR));
+	__vcpu_assign_sys_reg(vcpu, SPSR_EL2,	 read_sysreg_el1(SYS_SPSR));
+
+	if (ctxt_has_sctlr2(&vcpu->arch.ctxt))
+		__vcpu_assign_sys_reg(vcpu, SCTLR2_EL2, read_sysreg_el1(SYS_SCTLR2));
 }
 
 static void __sysreg_restore_vel2_state(struct kvm_vcpu *vcpu)
@@ -87,11 +90,12 @@ static void __sysreg_restore_vel2_state(struct kvm_vcpu *vcpu)
 	write_sysreg(__vcpu_sys_reg(vcpu, PAR_EL1),	par_el1);
 	write_sysreg(__vcpu_sys_reg(vcpu, TPIDR_EL1),	tpidr_el1);
 
-	write_sysreg(__vcpu_sys_reg(vcpu, MPIDR_EL1),		vmpidr_el2);
-	write_sysreg_el1(__vcpu_sys_reg(vcpu, MAIR_EL2),	SYS_MAIR);
-	write_sysreg_el1(__vcpu_sys_reg(vcpu, VBAR_EL2),	SYS_VBAR);
-	write_sysreg_el1(__vcpu_sys_reg(vcpu, CONTEXTIDR_EL2),	SYS_CONTEXTIDR);
-	write_sysreg_el1(__vcpu_sys_reg(vcpu, AMAIR_EL2),	SYS_AMAIR);
+	write_sysreg(ctxt_midr_el1(&vcpu->arch.ctxt),			vpidr_el2);
+	write_sysreg(__vcpu_sys_reg(vcpu, MPIDR_EL1),			vmpidr_el2);
+	write_sysreg_el1(__vcpu_sys_reg(vcpu, MAIR_EL2),		SYS_MAIR);
+	write_sysreg_el1(__vcpu_sys_reg(vcpu, VBAR_EL2),		SYS_VBAR);
+	write_sysreg_el1(__vcpu_sys_reg(vcpu, CONTEXTIDR_EL2),		SYS_CONTEXTIDR);
+	write_sysreg_el1(__vcpu_sys_reg(vcpu, AMAIR_EL2),		SYS_AMAIR);
 
 	if (vcpu_el2_e2h_is_set(vcpu)) {
 		/*
@@ -138,6 +142,9 @@ static void __sysreg_restore_vel2_state(struct kvm_vcpu *vcpu)
 	write_sysreg(__vcpu_sys_reg(vcpu, SP_EL2),		sp_el1);
 	write_sysreg_el1(__vcpu_sys_reg(vcpu, ELR_EL2),		SYS_ELR);
 	write_sysreg_el1(__vcpu_sys_reg(vcpu, SPSR_EL2),	SYS_SPSR);
+
+	if (ctxt_has_sctlr2(&vcpu->arch.ctxt))
+		write_sysreg_el1(__vcpu_sys_reg(vcpu, SCTLR2_EL2), SYS_SCTLR2);
 }
 
 /*
@@ -191,7 +198,7 @@ void __vcpu_load_switch_sysregs(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *guest_ctxt = &vcpu->arch.ctxt;
 	struct kvm_cpu_context *host_ctxt;
-	u64 mpidr;
+	u64 midr, mpidr;
 
 	host_ctxt = host_data_ptr(host_ctxt);
 	__sysreg_save_user_state(host_ctxt);
@@ -216,27 +223,22 @@ void __vcpu_load_switch_sysregs(struct kvm_vcpu *vcpu)
 	__sysreg32_restore_state(vcpu);
 	__sysreg_restore_user_state(guest_ctxt);
 
-	if (unlikely(__is_hyp_ctxt(guest_ctxt))) {
+	if (unlikely(is_hyp_ctxt(vcpu))) {
 		__sysreg_restore_vel2_state(vcpu);
 	} else {
 		if (vcpu_has_nv(vcpu)) {
 			/*
-			 * Use the guest hypervisor's VPIDR_EL2 when in a
-			 * nested state. The hardware value of MIDR_EL1 gets
-			 * restored on put.
-			 */
-			write_sysreg(ctxt_sys_reg(guest_ctxt, VPIDR_EL2), vpidr_el2);
-
-			/*
 			 * As we're restoring a nested guest, set the value
 			 * provided by the guest hypervisor.
 			 */
+			midr = ctxt_sys_reg(guest_ctxt, VPIDR_EL2);
 			mpidr = ctxt_sys_reg(guest_ctxt, VMPIDR_EL2);
 		} else {
+			midr = ctxt_midr_el1(guest_ctxt);
 			mpidr = ctxt_sys_reg(guest_ctxt, MPIDR_EL1);
 		}
 
-		__sysreg_restore_el1_state(guest_ctxt, mpidr);
+		__sysreg_restore_el1_state(guest_ctxt, midr, mpidr);
 	}
 
 	vcpu_set_flag(vcpu, SYSREGS_ON_CPU);
@@ -260,7 +262,7 @@ void __vcpu_put_switch_sysregs(struct kvm_vcpu *vcpu)
 
 	host_ctxt = host_data_ptr(host_ctxt);
 
-	if (unlikely(__is_hyp_ctxt(guest_ctxt)))
+	if (unlikely(is_hyp_ctxt(vcpu)))
 		__sysreg_save_vel2_state(vcpu);
 	else
 		__sysreg_save_el1_state(guest_ctxt);
@@ -271,9 +273,5 @@ void __vcpu_put_switch_sysregs(struct kvm_vcpu *vcpu)
 	/* Restore host user state */
 	__sysreg_restore_user_state(host_ctxt);
 
-	/* If leaving a nesting guest, restore MIDR_EL1 default view */
-	if (vcpu_has_nv(vcpu))
-		write_sysreg(read_cpuid_id(),	vpidr_el2);
-
 	vcpu_clear_flag(vcpu, SYSREGS_ON_CPU);
 }
diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c
index 3d50a1bd2bdb..ec2569818629 100644
--- a/arch/arm64/kvm/hyp/vhe/tlb.c
+++ b/arch/arm64/kvm/hyp/vhe/tlb.c
@@ -63,7 +63,7 @@ static void enter_vmid_context(struct kvm_s2_mmu *mmu,
 	__load_stage2(mmu, mmu->arch);
 	val = read_sysreg(hcr_el2);
 	val &= ~HCR_TGE;
-	write_sysreg(val, hcr_el2);
+	write_sysreg_hcr(val);
 	isb();
 }
 
@@ -73,7 +73,7 @@ static void exit_vmid_context(struct tlb_inv_context *cxt)
 	 * We're done with the TLB operation, let's restore the host's
 	 * view of HCR_EL2.
 	 */
-	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
+	write_sysreg_hcr(HCR_HOST_VHE_FLAGS);
 	isb();
 
 	/* ... and the stage-2 MMU context that we switched away from */
diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c
index 27ce4cb44904..58c5fe7d7572 100644
--- a/arch/arm64/kvm/hypercalls.c
+++ b/arch/arm64/kvm/hypercalls.c
@@ -15,6 +15,8 @@
 	GENMASK(KVM_REG_ARM_STD_HYP_BMAP_BIT_COUNT - 1, 0)
 #define KVM_ARM_SMCCC_VENDOR_HYP_FEATURES			\
 	GENMASK(KVM_REG_ARM_VENDOR_HYP_BMAP_BIT_COUNT - 1, 0)
+#define KVM_ARM_SMCCC_VENDOR_HYP_FEATURES_2			\
+	GENMASK(KVM_REG_ARM_VENDOR_HYP_BMAP_2_BIT_COUNT - 1, 0)
 
 static void kvm_ptp_get_time(struct kvm_vcpu *vcpu, u64 *val)
 {
@@ -268,6 +270,7 @@ int kvm_smccc_call_handler(struct kvm_vcpu *vcpu)
 	u32 feature;
 	u8 action;
 	gpa_t gpa;
+	uuid_t uuid;
 
 	action = kvm_smccc_get_action(vcpu, func_id);
 	switch (action) {
@@ -353,13 +356,16 @@ int kvm_smccc_call_handler(struct kvm_vcpu *vcpu)
 			val[0] = gpa;
 		break;
 	case ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID:
-		val[0] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_0;
-		val[1] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_1;
-		val[2] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_2;
-		val[3] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_3;
+		uuid = ARM_SMCCC_VENDOR_HYP_UID_KVM;
+		val[0] = smccc_uuid_to_reg(&uuid, 0);
+		val[1] = smccc_uuid_to_reg(&uuid, 1);
+		val[2] = smccc_uuid_to_reg(&uuid, 2);
+		val[3] = smccc_uuid_to_reg(&uuid, 3);
 		break;
 	case ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID:
 		val[0] = smccc_feat->vendor_hyp_bmap;
+		/* Function numbers 2-63 are reserved for pKVM for now */
+		val[2] = smccc_feat->vendor_hyp_bmap_2;
 		break;
 	case ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID:
 		kvm_ptp_get_time(vcpu, val);
@@ -387,6 +393,7 @@ static const u64 kvm_arm_fw_reg_ids[] = {
 	KVM_REG_ARM_STD_BMAP,
 	KVM_REG_ARM_STD_HYP_BMAP,
 	KVM_REG_ARM_VENDOR_HYP_BMAP,
+	KVM_REG_ARM_VENDOR_HYP_BMAP_2,
 };
 
 void kvm_arm_init_hypercalls(struct kvm *kvm)
@@ -497,6 +504,9 @@ int kvm_arm_get_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	case KVM_REG_ARM_VENDOR_HYP_BMAP:
 		val = READ_ONCE(smccc_feat->vendor_hyp_bmap);
 		break;
+	case KVM_REG_ARM_VENDOR_HYP_BMAP_2:
+		val = READ_ONCE(smccc_feat->vendor_hyp_bmap_2);
+		break;
 	default:
 		return -ENOENT;
 	}
@@ -527,6 +537,10 @@ static int kvm_arm_set_fw_reg_bmap(struct kvm_vcpu *vcpu, u64 reg_id, u64 val)
 		fw_reg_bmap = &smccc_feat->vendor_hyp_bmap;
 		fw_reg_features = KVM_ARM_SMCCC_VENDOR_HYP_FEATURES;
 		break;
+	case KVM_REG_ARM_VENDOR_HYP_BMAP_2:
+		fw_reg_bmap = &smccc_feat->vendor_hyp_bmap_2;
+		fw_reg_features = KVM_ARM_SMCCC_VENDOR_HYP_FEATURES_2;
+		break;
 	default:
 		return -ENOENT;
 	}
@@ -633,6 +647,7 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	case KVM_REG_ARM_STD_BMAP:
 	case KVM_REG_ARM_STD_HYP_BMAP:
 	case KVM_REG_ARM_VENDOR_HYP_BMAP:
+	case KVM_REG_ARM_VENDOR_HYP_BMAP_2:
 		return kvm_arm_set_fw_reg_bmap(vcpu, reg->id, val);
 	default:
 		return -ENOENT;
diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c
index a640e839848e..dfcd66c65517 100644
--- a/arch/arm64/kvm/inject_fault.c
+++ b/arch/arm64/kvm/inject_fault.c
@@ -15,13 +15,11 @@
 #include <asm/kvm_nested.h>
 #include <asm/esr.h>
 
-static void pend_sync_exception(struct kvm_vcpu *vcpu)
+static unsigned int exception_target_el(struct kvm_vcpu *vcpu)
 {
 	/* If not nesting, EL1 is the only possible exception target */
-	if (likely(!vcpu_has_nv(vcpu))) {
-		kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
-		return;
-	}
+	if (likely(!vcpu_has_nv(vcpu)))
+		return PSR_MODE_EL1h;
 
 	/*
 	 * With NV, we need to pick between EL1 and EL2. Note that we
@@ -32,35 +30,112 @@ static void pend_sync_exception(struct kvm_vcpu *vcpu)
 	switch(*vcpu_cpsr(vcpu) & PSR_MODE_MASK) {
 	case PSR_MODE_EL2h:
 	case PSR_MODE_EL2t:
-		kvm_pend_exception(vcpu, EXCEPT_AA64_EL2_SYNC);
-		break;
+		return PSR_MODE_EL2h;
 	case PSR_MODE_EL1h:
 	case PSR_MODE_EL1t:
-		kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
-		break;
+		return PSR_MODE_EL1h;
 	case PSR_MODE_EL0t:
-		if (vcpu_el2_tge_is_set(vcpu))
-			kvm_pend_exception(vcpu, EXCEPT_AA64_EL2_SYNC);
-		else
-			kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
-		break;
+		return vcpu_el2_tge_is_set(vcpu) ? PSR_MODE_EL2h : PSR_MODE_EL1h;
 	default:
 		BUG();
 	}
 }
 
-static bool match_target_el(struct kvm_vcpu *vcpu, unsigned long target)
+static enum vcpu_sysreg exception_esr_elx(struct kvm_vcpu *vcpu)
+{
+	if (exception_target_el(vcpu) == PSR_MODE_EL2h)
+		return ESR_EL2;
+
+	return ESR_EL1;
+}
+
+static enum vcpu_sysreg exception_far_elx(struct kvm_vcpu *vcpu)
+{
+	if (exception_target_el(vcpu) == PSR_MODE_EL2h)
+		return FAR_EL2;
+
+	return FAR_EL1;
+}
+
+static void pend_sync_exception(struct kvm_vcpu *vcpu)
 {
-	return (vcpu_get_flag(vcpu, EXCEPT_MASK) == target);
+	if (exception_target_el(vcpu) == PSR_MODE_EL1h)
+		kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
+	else
+		kvm_pend_exception(vcpu, EXCEPT_AA64_EL2_SYNC);
+}
+
+static void pend_serror_exception(struct kvm_vcpu *vcpu)
+{
+	if (exception_target_el(vcpu) == PSR_MODE_EL1h)
+		kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SERR);
+	else
+		kvm_pend_exception(vcpu, EXCEPT_AA64_EL2_SERR);
+}
+
+static bool __effective_sctlr2_bit(struct kvm_vcpu *vcpu, unsigned int idx)
+{
+	u64 sctlr2;
+
+	if (!kvm_has_sctlr2(vcpu->kvm))
+		return false;
+
+	if (is_nested_ctxt(vcpu) &&
+	    !(__vcpu_sys_reg(vcpu, HCRX_EL2) & HCRX_EL2_SCTLR2En))
+		return false;
+
+	if (exception_target_el(vcpu) == PSR_MODE_EL1h)
+		sctlr2 = vcpu_read_sys_reg(vcpu, SCTLR2_EL1);
+	else
+		sctlr2 = vcpu_read_sys_reg(vcpu, SCTLR2_EL2);
+
+	return sctlr2 & BIT(idx);
+}
+
+static bool effective_sctlr2_ease(struct kvm_vcpu *vcpu)
+{
+	return __effective_sctlr2_bit(vcpu, SCTLR2_EL1_EASE_SHIFT);
+}
+
+static bool effective_sctlr2_nmea(struct kvm_vcpu *vcpu)
+{
+	return __effective_sctlr2_bit(vcpu, SCTLR2_EL1_NMEA_SHIFT);
 }
 
 static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr)
 {
 	unsigned long cpsr = *vcpu_cpsr(vcpu);
 	bool is_aarch32 = vcpu_mode_is_32bit(vcpu);
-	u64 esr = 0;
+	u64 esr = 0, fsc;
+	int level;
 
-	pend_sync_exception(vcpu);
+	/*
+	 * If injecting an abort from a failed S1PTW, rewalk the S1 PTs to
+	 * find the failing level. If we can't find it, assume the error was
+	 * transient and restart without changing the state.
+	 */
+	if (kvm_vcpu_abt_iss1tw(vcpu)) {
+		u64 hpfar = kvm_vcpu_get_fault_ipa(vcpu);
+		int ret;
+
+		if (hpfar == INVALID_GPA)
+			return;
+
+		ret = __kvm_find_s1_desc_level(vcpu, addr, hpfar, &level);
+		if (ret)
+			return;
+
+		WARN_ON_ONCE(level < -1 || level > 3);
+		fsc = ESR_ELx_FSC_SEA_TTW(level);
+	} else {
+		fsc = ESR_ELx_FSC_EXTABT;
+	}
+
+	/* This delight is brought to you by FEAT_DoubleFault2. */
+	if (effective_sctlr2_ease(vcpu))
+		pend_serror_exception(vcpu);
+	else
+		pend_sync_exception(vcpu);
 
 	/*
 	 * Build an {i,d}abort, depending on the level and the
@@ -81,15 +156,10 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr
 	if (!is_iabt)
 		esr |= ESR_ELx_EC_DABT_LOW << ESR_ELx_EC_SHIFT;
 
-	esr |= ESR_ELx_FSC_EXTABT;
+	esr |= fsc;
 
-	if (match_target_el(vcpu, unpack_vcpu_flag(EXCEPT_AA64_EL1_SYNC))) {
-		vcpu_write_sys_reg(vcpu, addr, FAR_EL1);
-		vcpu_write_sys_reg(vcpu, esr, ESR_EL1);
-	} else {
-		vcpu_write_sys_reg(vcpu, addr, FAR_EL2);
-		vcpu_write_sys_reg(vcpu, esr, ESR_EL2);
-	}
+	vcpu_write_sys_reg(vcpu, addr, exception_far_elx(vcpu));
+	vcpu_write_sys_reg(vcpu, esr, exception_esr_elx(vcpu));
 }
 
 static void inject_undef64(struct kvm_vcpu *vcpu)
@@ -105,10 +175,7 @@ static void inject_undef64(struct kvm_vcpu *vcpu)
 	if (kvm_vcpu_trap_il_is32bit(vcpu))
 		esr |= ESR_ELx_IL;
 
-	if (match_target_el(vcpu, unpack_vcpu_flag(EXCEPT_AA64_EL1_SYNC)))
-		vcpu_write_sys_reg(vcpu, esr, ESR_EL1);
-	else
-		vcpu_write_sys_reg(vcpu, esr, ESR_EL2);
+	vcpu_write_sys_reg(vcpu, esr, exception_esr_elx(vcpu));
 }
 
 #define DFSR_FSC_EXTABT_LPAE	0x10
@@ -155,36 +222,35 @@ static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt, u32 addr)
 	vcpu_write_sys_reg(vcpu, far, FAR_EL1);
 }
 
-/**
- * kvm_inject_dabt - inject a data abort into the guest
- * @vcpu: The VCPU to receive the data abort
- * @addr: The address to report in the DFAR
- *
- * It is assumed that this code is called from the VCPU thread and that the
- * VCPU therefore is not currently executing guest code.
- */
-void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr)
+static void __kvm_inject_sea(struct kvm_vcpu *vcpu, bool iabt, u64 addr)
 {
 	if (vcpu_el1_is_32bit(vcpu))
-		inject_abt32(vcpu, false, addr);
+		inject_abt32(vcpu, iabt, addr);
 	else
-		inject_abt64(vcpu, false, addr);
+		inject_abt64(vcpu, iabt, addr);
 }
 
-/**
- * kvm_inject_pabt - inject a prefetch abort into the guest
- * @vcpu: The VCPU to receive the prefetch abort
- * @addr: The address to report in the DFAR
- *
- * It is assumed that this code is called from the VCPU thread and that the
- * VCPU therefore is not currently executing guest code.
- */
-void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr)
+static bool kvm_sea_target_is_el2(struct kvm_vcpu *vcpu)
 {
-	if (vcpu_el1_is_32bit(vcpu))
-		inject_abt32(vcpu, true, addr);
-	else
-		inject_abt64(vcpu, true, addr);
+	if (__vcpu_sys_reg(vcpu, HCR_EL2) & (HCR_TGE | HCR_TEA))
+		return true;
+
+	if (!vcpu_mode_priv(vcpu))
+		return false;
+
+	return (*vcpu_cpsr(vcpu) & PSR_A_BIT) &&
+	       (__vcpu_sys_reg(vcpu, HCRX_EL2) & HCRX_EL2_TMEA);
+}
+
+int kvm_inject_sea(struct kvm_vcpu *vcpu, bool iabt, u64 addr)
+{
+	lockdep_assert_held(&vcpu->mutex);
+
+	if (is_nested_ctxt(vcpu) && kvm_sea_target_is_el2(vcpu))
+		return kvm_inject_nested_sea(vcpu, iabt, addr);
+
+	__kvm_inject_sea(vcpu, iabt, addr);
+	return 1;
 }
 
 void kvm_inject_size_fault(struct kvm_vcpu *vcpu)
@@ -194,10 +260,7 @@ void kvm_inject_size_fault(struct kvm_vcpu *vcpu)
 	addr  = kvm_vcpu_get_fault_ipa(vcpu);
 	addr |= kvm_vcpu_get_hfar(vcpu) & GENMASK(11, 0);
 
-	if (kvm_vcpu_trap_is_iabt(vcpu))
-		kvm_inject_pabt(vcpu, addr);
-	else
-		kvm_inject_dabt(vcpu, addr);
+	__kvm_inject_sea(vcpu, kvm_vcpu_trap_is_iabt(vcpu), addr);
 
 	/*
 	 * If AArch64 or LPAE, set FSC to 0 to indicate an Address
@@ -210,9 +273,9 @@ void kvm_inject_size_fault(struct kvm_vcpu *vcpu)
 	    !(vcpu_read_sys_reg(vcpu, TCR_EL1) & TTBCR_EAE))
 		return;
 
-	esr = vcpu_read_sys_reg(vcpu, ESR_EL1);
+	esr = vcpu_read_sys_reg(vcpu, exception_esr_elx(vcpu));
 	esr &= ~GENMASK_ULL(5, 0);
-	vcpu_write_sys_reg(vcpu, esr, ESR_EL1);
+	vcpu_write_sys_reg(vcpu, esr, exception_esr_elx(vcpu));
 }
 
 /**
@@ -230,25 +293,70 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu)
 		inject_undef64(vcpu);
 }
 
-void kvm_set_sei_esr(struct kvm_vcpu *vcpu, u64 esr)
+static bool serror_is_masked(struct kvm_vcpu *vcpu)
 {
-	vcpu_set_vsesr(vcpu, esr & ESR_ELx_ISS_MASK);
-	*vcpu_hcr(vcpu) |= HCR_VSE;
+	return (*vcpu_cpsr(vcpu) & PSR_A_BIT) && !effective_sctlr2_nmea(vcpu);
 }
 
-/**
- * kvm_inject_vabt - inject an async abort / SError into the guest
- * @vcpu: The VCPU to receive the exception
- *
- * It is assumed that this code is called from the VCPU thread and that the
- * VCPU therefore is not currently executing guest code.
- *
- * Systems with the RAS Extensions specify an imp-def ESR (ISV/IDS = 1) with
- * the remaining ISS all-zeros so that this error is not interpreted as an
- * uncategorized RAS error. Without the RAS Extensions we can't specify an ESR
- * value, so the CPU generates an imp-def value.
- */
-void kvm_inject_vabt(struct kvm_vcpu *vcpu)
+static bool kvm_serror_target_is_el2(struct kvm_vcpu *vcpu)
 {
-	kvm_set_sei_esr(vcpu, ESR_ELx_ISV);
+	if (is_hyp_ctxt(vcpu) || vcpu_el2_amo_is_set(vcpu))
+		return true;
+
+	if (!(__vcpu_sys_reg(vcpu, HCRX_EL2) & HCRX_EL2_TMEA))
+		return false;
+
+	/*
+	 * In another example where FEAT_DoubleFault2 is entirely backwards,
+	 * "masked" as it relates to the routing effects of HCRX_EL2.TMEA
+	 * doesn't consider SCTLR2_EL1.NMEA. That is to say, even if EL1 asked
+	 * for non-maskable SErrors, the EL2 bit takes priority if A is set.
+	 */
+	if (vcpu_mode_priv(vcpu))
+		return *vcpu_cpsr(vcpu) & PSR_A_BIT;
+
+	/*
+	 * Otherwise SErrors are considered unmasked when taken from EL0 and
+	 * NMEA is set.
+	 */
+	return serror_is_masked(vcpu);
+}
+
+static bool kvm_serror_undeliverable_at_el2(struct kvm_vcpu *vcpu)
+{
+	return !(vcpu_el2_tge_is_set(vcpu) || vcpu_el2_amo_is_set(vcpu));
+}
+
+int kvm_inject_serror_esr(struct kvm_vcpu *vcpu, u64 esr)
+{
+	lockdep_assert_held(&vcpu->mutex);
+
+	if (is_nested_ctxt(vcpu) && kvm_serror_target_is_el2(vcpu))
+		return kvm_inject_nested_serror(vcpu, esr);
+
+	if (vcpu_is_el2(vcpu) && kvm_serror_undeliverable_at_el2(vcpu)) {
+		vcpu_set_vsesr(vcpu, esr);
+		vcpu_set_flag(vcpu, NESTED_SERROR_PENDING);
+		return 1;
+	}
+
+	/*
+	 * Emulate the exception entry if SErrors are unmasked. This is useful if
+	 * the vCPU is in a nested context w/ vSErrors enabled then we've already
+	 * delegated he hardware vSError context (i.e. HCR_EL2.VSE, VSESR_EL2,
+	 * VDISR_EL2) to the guest hypervisor.
+	 *
+	 * As we're emulating the SError injection we need to explicitly populate
+	 * ESR_ELx.EC because hardware will not do it on our behalf.
+	 */
+	if (!serror_is_masked(vcpu)) {
+		pend_serror_exception(vcpu);
+		esr |= FIELD_PREP(ESR_ELx_EC_MASK, ESR_ELx_EC_SERROR);
+		vcpu_write_sys_reg(vcpu, esr, exception_esr_elx(vcpu));
+		return 1;
+	}
+
+	vcpu_set_vsesr(vcpu, esr & ESR_ELx_ISS_MASK);
+	*vcpu_hcr(vcpu) |= HCR_VSE;
+	return 1;
 }
diff --git a/arch/arm64/kvm/mmio.c b/arch/arm64/kvm/mmio.c
index ab365e839874..54f9358c9e0e 100644
--- a/arch/arm64/kvm/mmio.c
+++ b/arch/arm64/kvm/mmio.c
@@ -72,7 +72,7 @@ unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len)
 	return data;
 }
 
-static bool kvm_pending_sync_exception(struct kvm_vcpu *vcpu)
+static bool kvm_pending_external_abort(struct kvm_vcpu *vcpu)
 {
 	if (!vcpu_get_flag(vcpu, PENDING_EXCEPTION))
 		return false;
@@ -90,6 +90,8 @@ static bool kvm_pending_sync_exception(struct kvm_vcpu *vcpu)
 		switch (vcpu_get_flag(vcpu, EXCEPT_MASK)) {
 		case unpack_vcpu_flag(EXCEPT_AA64_EL1_SYNC):
 		case unpack_vcpu_flag(EXCEPT_AA64_EL2_SYNC):
+		case unpack_vcpu_flag(EXCEPT_AA64_EL1_SERR):
+		case unpack_vcpu_flag(EXCEPT_AA64_EL2_SERR):
 			return true;
 		default:
 			return false;
@@ -113,7 +115,7 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu)
 	 * Detect if the MMIO return was already handled or if userspace aborted
 	 * the MMIO access.
 	 */
-	if (unlikely(!vcpu->mmio_needed || kvm_pending_sync_exception(vcpu)))
+	if (unlikely(!vcpu->mmio_needed || kvm_pending_external_abort(vcpu)))
 		return 1;
 
 	vcpu->mmio_needed = 0;
@@ -169,10 +171,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
 		trace_kvm_mmio_nisv(*vcpu_pc(vcpu), kvm_vcpu_get_esr(vcpu),
 				    kvm_vcpu_get_hfar(vcpu), fault_ipa);
 
-		if (vcpu_is_protected(vcpu)) {
-			kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
-			return 1;
-		}
+		if (vcpu_is_protected(vcpu))
+			return kvm_inject_sea_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
 
 		if (test_bit(KVM_ARCH_FLAG_RETURN_NISV_IO_ABORT_TO_USER,
 			     &vcpu->kvm->arch.flags)) {
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
index c9d46ad57e52..48d7c372a4cd 100644
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@@ -4,18 +4,20 @@
  * Author: Christoffer Dall <c.dall@virtualopensystems.com>
  */
 
+#include <linux/acpi.h>
 #include <linux/mman.h>
 #include <linux/kvm_host.h>
 #include <linux/io.h>
 #include <linux/hugetlb.h>
 #include <linux/sched/signal.h>
 #include <trace/events/kvm.h>
+#include <asm/acpi.h>
 #include <asm/pgalloc.h>
 #include <asm/cacheflush.h>
 #include <asm/kvm_arm.h>
 #include <asm/kvm_mmu.h>
 #include <asm/kvm_pgtable.h>
-#include <asm/kvm_ras.h>
+#include <asm/kvm_pkvm.h>
 #include <asm/kvm_asm.h>
 #include <asm/kvm_emulate.h>
 #include <asm/virt.h>
@@ -29,8 +31,12 @@ static unsigned long __ro_after_init hyp_idmap_start;
 static unsigned long __ro_after_init hyp_idmap_end;
 static phys_addr_t __ro_after_init hyp_idmap_vector;
 
+u32 __ro_after_init __hyp_va_bits;
+
 static unsigned long __ro_after_init io_map_base;
 
+#define KVM_PGT_FN(fn)		(!is_protected_kvm_enabled() ? fn : p ## fn)
+
 static phys_addr_t __stage2_range_addr_end(phys_addr_t addr, phys_addr_t end,
 					   phys_addr_t size)
 {
@@ -147,7 +153,7 @@ static int kvm_mmu_split_huge_pages(struct kvm *kvm, phys_addr_t addr,
 			return -EINVAL;
 
 		next = __stage2_range_addr_end(addr, end, chunk_size);
-		ret = kvm_pgtable_stage2_split(pgt, addr, next - addr, cache);
+		ret = KVM_PGT_FN(kvm_pgtable_stage2_split)(pgt, addr, next - addr, cache);
 		if (ret)
 			break;
 	} while (addr = next, addr != end);
@@ -168,21 +174,24 @@ static bool memslot_is_logging(struct kvm_memory_slot *memslot)
  */
 int kvm_arch_flush_remote_tlbs(struct kvm *kvm)
 {
-	kvm_call_hyp(__kvm_tlb_flush_vmid, &kvm->arch.mmu);
+	if (is_protected_kvm_enabled())
+		kvm_call_hyp_nvhe(__pkvm_tlb_flush_vmid, kvm->arch.pkvm.handle);
+	else
+		kvm_call_hyp(__kvm_tlb_flush_vmid, &kvm->arch.mmu);
 	return 0;
 }
 
 int kvm_arch_flush_remote_tlbs_range(struct kvm *kvm,
 				      gfn_t gfn, u64 nr_pages)
 {
-	kvm_tlb_flush_vmid_range(&kvm->arch.mmu,
-				gfn << PAGE_SHIFT, nr_pages << PAGE_SHIFT);
-	return 0;
-}
+	u64 size = nr_pages << PAGE_SHIFT;
+	u64 addr = gfn << PAGE_SHIFT;
 
-static bool kvm_is_device_pfn(unsigned long pfn)
-{
-	return !pfn_is_map_memory(pfn);
+	if (is_protected_kvm_enabled())
+		kvm_call_hyp_nvhe(__pkvm_tlb_flush_vmid, kvm->arch.pkvm.handle);
+	else
+		kvm_tlb_flush_vmid_range(&kvm->arch.mmu, addr, size);
+	return 0;
 }
 
 static void *stage2_memcache_zalloc_page(void *arg)
@@ -225,7 +234,7 @@ static void stage2_free_unlinked_table_rcu_cb(struct rcu_head *head)
 	void *pgtable = page_to_virt(page);
 	s8 level = page_private(page);
 
-	kvm_pgtable_stage2_free_unlinked(&kvm_s2_mm_ops, pgtable, level);
+	KVM_PGT_FN(kvm_pgtable_stage2_free_unlinked)(&kvm_s2_mm_ops, pgtable, level);
 }
 
 static void stage2_free_unlinked_table(void *addr, s8 level)
@@ -324,7 +333,7 @@ static void __unmap_stage2_range(struct kvm_s2_mmu *mmu, phys_addr_t start, u64
 
 	lockdep_assert_held_write(&kvm->mmu_lock);
 	WARN_ON(size & ~PAGE_MASK);
-	WARN_ON(stage2_apply_range(mmu, start, end, kvm_pgtable_stage2_unmap,
+	WARN_ON(stage2_apply_range(mmu, start, end, KVM_PGT_FN(kvm_pgtable_stage2_unmap),
 				   may_block));
 }
 
@@ -336,7 +345,7 @@ void kvm_stage2_unmap_range(struct kvm_s2_mmu *mmu, phys_addr_t start,
 
 void kvm_stage2_flush_range(struct kvm_s2_mmu *mmu, phys_addr_t addr, phys_addr_t end)
 {
-	stage2_apply_range_resched(mmu, addr, end, kvm_pgtable_stage2_flush);
+	stage2_apply_range_resched(mmu, addr, end, KVM_PGT_FN(kvm_pgtable_stage2_flush));
 }
 
 static void stage2_flush_memslot(struct kvm *kvm,
@@ -704,10 +713,10 @@ int create_hyp_stack(phys_addr_t phys_addr, unsigned long *haddr)
 
 	mutex_lock(&kvm_hyp_pgd_mutex);
 	/*
-	 * Efficient stack verification using the PAGE_SHIFT bit implies
+	 * Efficient stack verification using the NVHE_STACK_SHIFT bit implies
 	 * an alignment of our allocation on the order of the size.
 	 */
-	size = PAGE_SIZE * 2;
+	size = NVHE_STACK_SIZE * 2;
 	base = ALIGN_DOWN(io_map_base - size, size);
 
 	ret = __hyp_alloc_private_va_range(base);
@@ -724,12 +733,12 @@ int create_hyp_stack(phys_addr_t phys_addr, unsigned long *haddr)
 	 * at the higher address and leave the lower guard page
 	 * unbacked.
 	 *
-	 * Any valid stack address now has the PAGE_SHIFT bit as 1
+	 * Any valid stack address now has the NVHE_STACK_SHIFT bit as 1
 	 * and addresses corresponding to the guard page have the
-	 * PAGE_SHIFT bit as 0 - this is used for overflow detection.
+	 * NVHE_STACK_SHIFT bit as 0 - this is used for overflow detection.
 	 */
-	ret = __create_hyp_mappings(base + PAGE_SIZE, PAGE_SIZE, phys_addr,
-				    PAGE_HYP);
+	ret = __create_hyp_mappings(base + NVHE_STACK_SIZE, NVHE_STACK_SIZE,
+				    phys_addr, PAGE_HYP);
 	if (ret)
 		kvm_err("Cannot map hyp stack\n");
 
@@ -895,6 +904,38 @@ static int kvm_init_ipa_range(struct kvm_s2_mmu *mmu, unsigned long type)
 	return 0;
 }
 
+/*
+ * Assume that @pgt is valid and unlinked from the KVM MMU to free the
+ * page-table without taking the kvm_mmu_lock and without performing any
+ * TLB invalidations.
+ *
+ * Also, the range of addresses can be large enough to cause need_resched
+ * warnings, for instance on CONFIG_PREEMPT_NONE kernels. Hence, invoke
+ * cond_resched() periodically to prevent hogging the CPU for a long time
+ * and schedule something else, if required.
+ */
+static void stage2_destroy_range(struct kvm_pgtable *pgt, phys_addr_t addr,
+				   phys_addr_t end)
+{
+	u64 next;
+
+	do {
+		next = stage2_range_addr_end(addr, end);
+		KVM_PGT_FN(kvm_pgtable_stage2_destroy_range)(pgt, addr,
+							     next - addr);
+		if (next != end)
+			cond_resched();
+	} while (addr = next, addr != end);
+}
+
+static void kvm_stage2_destroy(struct kvm_pgtable *pgt)
+{
+	unsigned int ia_bits = VTCR_EL2_IPA(pgt->mmu->vtcr);
+
+	stage2_destroy_range(pgt, 0, BIT(ia_bits));
+	KVM_PGT_FN(kvm_pgtable_stage2_destroy_pgd)(pgt);
+}
+
 /**
  * kvm_init_stage2_mmu - Initialise a S2 MMU structure
  * @kvm:	The pointer to the KVM structure
@@ -942,10 +983,14 @@ int kvm_init_stage2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu, unsigned long t
 		return -ENOMEM;
 
 	mmu->arch = &kvm->arch;
-	err = kvm_pgtable_stage2_init(pgt, mmu, &kvm_s2_mm_ops);
+	err = KVM_PGT_FN(kvm_pgtable_stage2_init)(pgt, mmu, &kvm_s2_mm_ops);
 	if (err)
 		goto out_free_pgtable;
 
+	mmu->pgt = pgt;
+	if (is_protected_kvm_enabled())
+		return 0;
+
 	mmu->last_vcpu_ran = alloc_percpu(typeof(*mmu->last_vcpu_ran));
 	if (!mmu->last_vcpu_ran) {
 		err = -ENOMEM;
@@ -959,7 +1004,6 @@ int kvm_init_stage2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu, unsigned long t
 	mmu->split_page_chunk_size = KVM_ARM_EAGER_SPLIT_CHUNK_SIZE_DEFAULT;
 	mmu->split_page_cache.gfp_zero = __GFP_ZERO;
 
-	mmu->pgt = pgt;
 	mmu->pgd_phys = __pa(pgt->pgd);
 
 	if (kvm_is_nested_s2_mmu(kvm, mmu))
@@ -968,7 +1012,7 @@ int kvm_init_stage2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu, unsigned long t
 	return 0;
 
 out_destroy_pgtable:
-	kvm_pgtable_stage2_destroy(pgt);
+	kvm_stage2_destroy(pgt);
 out_free_pgtable:
 	kfree(pgt);
 	return err;
@@ -1062,29 +1106,47 @@ void kvm_free_stage2_pgd(struct kvm_s2_mmu *mmu)
 		mmu->pgt = NULL;
 		free_percpu(mmu->last_vcpu_ran);
 	}
+
+	if (kvm_is_nested_s2_mmu(kvm, mmu))
+		kvm_init_nested_s2_mmu(mmu);
+
 	write_unlock(&kvm->mmu_lock);
 
 	if (pgt) {
-		kvm_pgtable_stage2_destroy(pgt);
+		kvm_stage2_destroy(pgt);
 		kfree(pgt);
 	}
 }
 
-static void hyp_mc_free_fn(void *addr, void *unused)
+static void hyp_mc_free_fn(void *addr, void *mc)
 {
+	struct kvm_hyp_memcache *memcache = mc;
+
+	if (memcache->flags & HYP_MEMCACHE_ACCOUNT_STAGE2)
+		kvm_account_pgtable_pages(addr, -1);
+
 	free_page((unsigned long)addr);
 }
 
-static void *hyp_mc_alloc_fn(void *unused)
+static void *hyp_mc_alloc_fn(void *mc)
 {
-	return (void *)__get_free_page(GFP_KERNEL_ACCOUNT);
+	struct kvm_hyp_memcache *memcache = mc;
+	void *addr;
+
+	addr = (void *)__get_free_page(GFP_KERNEL_ACCOUNT);
+	if (addr && memcache->flags & HYP_MEMCACHE_ACCOUNT_STAGE2)
+		kvm_account_pgtable_pages(addr, 1);
+
+	return addr;
 }
 
 void free_hyp_memcache(struct kvm_hyp_memcache *mc)
 {
-	if (is_protected_kvm_enabled())
-		__free_hyp_memcache(mc, hyp_mc_free_fn,
-				    kvm_host_va, NULL);
+	if (!is_protected_kvm_enabled())
+		return;
+
+	kfree(mc->mapping);
+	__free_hyp_memcache(mc, hyp_mc_free_fn, kvm_host_va, mc);
 }
 
 int topup_hyp_memcache(struct kvm_hyp_memcache *mc, unsigned long min_pages)
@@ -1092,8 +1154,14 @@ int topup_hyp_memcache(struct kvm_hyp_memcache *mc, unsigned long min_pages)
 	if (!is_protected_kvm_enabled())
 		return 0;
 
+	if (!mc->mapping) {
+		mc->mapping = kzalloc(sizeof(struct pkvm_mapping), GFP_KERNEL_ACCOUNT);
+		if (!mc->mapping)
+			return -ENOMEM;
+	}
+
 	return __topup_hyp_memcache(mc, min_pages, hyp_mc_alloc_fn,
-				    kvm_host_pa, NULL);
+				    kvm_host_pa, mc);
 }
 
 /**
@@ -1130,8 +1198,8 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
 			break;
 
 		write_lock(&kvm->mmu_lock);
-		ret = kvm_pgtable_stage2_map(pgt, addr, PAGE_SIZE, pa, prot,
-					     &cache, 0);
+		ret = KVM_PGT_FN(kvm_pgtable_stage2_map)(pgt, addr, PAGE_SIZE,
+				 pa, prot, &cache, 0);
 		write_unlock(&kvm->mmu_lock);
 		if (ret)
 			break;
@@ -1151,7 +1219,7 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
  */
 void kvm_stage2_wp_range(struct kvm_s2_mmu *mmu, phys_addr_t addr, phys_addr_t end)
 {
-	stage2_apply_range_resched(mmu, addr, end, kvm_pgtable_stage2_wrprotect);
+	stage2_apply_range_resched(mmu, addr, end, KVM_PGT_FN(kvm_pgtable_stage2_wrprotect));
 }
 
 /**
@@ -1268,6 +1336,10 @@ static bool fault_supports_stage2_huge_mapping(struct kvm_memory_slot *memslot,
 	if (map_size == PAGE_SIZE)
 		return true;
 
+	/* pKVM only supports PMD_SIZE huge-mappings */
+	if (is_protected_kvm_enabled() && map_size != PMD_SIZE)
+		return false;
+
 	size = memslot->npages * PAGE_SIZE;
 
 	gpa_start = memslot->base_gfn << PAGE_SHIFT;
@@ -1391,11 +1463,8 @@ static int get_vma_page_shift(struct vm_area_struct *vma, unsigned long hva)
  * able to see the page's tags and therefore they must be initialised first. If
  * PG_mte_tagged is set, tags have already been initialised.
  *
- * The race in the test/set of the PG_mte_tagged flag is handled by:
- * - preventing VM_SHARED mappings in a memslot with MTE preventing two VMs
- *   racing to santise the same page
- * - mmap_lock protects between a VM faulting a page in and the VMM performing
- *   an mprotect() to add VM_MTE
+ * Must be called with kvm->mmu_lock held to ensure the memory remains mapped
+ * while the tags are zeroed.
  */
 static void sanitise_mte_tags(struct kvm *kvm, kvm_pfn_t pfn,
 			      unsigned long size)
@@ -1430,39 +1499,179 @@ static bool kvm_vma_mte_allowed(struct vm_area_struct *vma)
 	return vma->vm_flags & VM_MTE_ALLOWED;
 }
 
+static bool kvm_vma_is_cacheable(struct vm_area_struct *vma)
+{
+	switch (FIELD_GET(PTE_ATTRINDX_MASK, pgprot_val(vma->vm_page_prot))) {
+	case MT_NORMAL_NC:
+	case MT_DEVICE_nGnRnE:
+	case MT_DEVICE_nGnRE:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static int prepare_mmu_memcache(struct kvm_vcpu *vcpu, bool topup_memcache,
+				void **memcache)
+{
+	int min_pages;
+
+	if (!is_protected_kvm_enabled())
+		*memcache = &vcpu->arch.mmu_page_cache;
+	else
+		*memcache = &vcpu->arch.pkvm_memcache;
+
+	if (!topup_memcache)
+		return 0;
+
+	min_pages = kvm_mmu_cache_min_pages(vcpu->arch.hw_mmu);
+
+	if (!is_protected_kvm_enabled())
+		return kvm_mmu_topup_memory_cache(*memcache, min_pages);
+
+	return topup_hyp_memcache(*memcache, min_pages);
+}
+
+/*
+ * Potentially reduce shadow S2 permissions to match the guest's own S2. For
+ * exec faults, we'd only reach this point if the guest actually allowed it (see
+ * kvm_s2_handle_perm_fault).
+ *
+ * Also encode the level of the original translation in the SW bits of the leaf
+ * entry as a proxy for the span of that translation. This will be retrieved on
+ * TLB invalidation from the guest and used to limit the invalidation scope if a
+ * TTL hint or a range isn't provided.
+ */
+static void adjust_nested_fault_perms(struct kvm_s2_trans *nested,
+				      enum kvm_pgtable_prot *prot,
+				      bool *writable)
+{
+	*writable &= kvm_s2_trans_writable(nested);
+	if (!kvm_s2_trans_readable(nested))
+		*prot &= ~KVM_PGTABLE_PROT_R;
+
+	*prot |= kvm_encode_nested_level(nested);
+}
+
+static void adjust_nested_exec_perms(struct kvm *kvm,
+				     struct kvm_s2_trans *nested,
+				     enum kvm_pgtable_prot *prot)
+{
+	if (!kvm_s2_trans_exec_el0(kvm, nested))
+		*prot &= ~KVM_PGTABLE_PROT_UX;
+	if (!kvm_s2_trans_exec_el1(kvm, nested))
+		*prot &= ~KVM_PGTABLE_PROT_PX;
+}
+
+#define KVM_PGTABLE_WALK_MEMABORT_FLAGS (KVM_PGTABLE_WALK_HANDLE_FAULT | KVM_PGTABLE_WALK_SHARED)
+
+static int gmem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
+		      struct kvm_s2_trans *nested,
+		      struct kvm_memory_slot *memslot, bool is_perm)
+{
+	bool write_fault, exec_fault, writable;
+	enum kvm_pgtable_walk_flags flags = KVM_PGTABLE_WALK_MEMABORT_FLAGS;
+	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R;
+	struct kvm_pgtable *pgt = vcpu->arch.hw_mmu->pgt;
+	unsigned long mmu_seq;
+	struct page *page;
+	struct kvm *kvm = vcpu->kvm;
+	void *memcache;
+	kvm_pfn_t pfn;
+	gfn_t gfn;
+	int ret;
+
+	ret = prepare_mmu_memcache(vcpu, true, &memcache);
+	if (ret)
+		return ret;
+
+	if (nested)
+		gfn = kvm_s2_trans_output(nested) >> PAGE_SHIFT;
+	else
+		gfn = fault_ipa >> PAGE_SHIFT;
+
+	write_fault = kvm_is_write_fault(vcpu);
+	exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
+
+	VM_WARN_ON_ONCE(write_fault && exec_fault);
+
+	mmu_seq = kvm->mmu_invalidate_seq;
+	/* Pairs with the smp_wmb() in kvm_mmu_invalidate_end(). */
+	smp_rmb();
+
+	ret = kvm_gmem_get_pfn(kvm, memslot, gfn, &pfn, &page, NULL);
+	if (ret) {
+		kvm_prepare_memory_fault_exit(vcpu, fault_ipa, PAGE_SIZE,
+					      write_fault, exec_fault, false);
+		return ret;
+	}
+
+	writable = !(memslot->flags & KVM_MEM_READONLY);
+
+	if (nested)
+		adjust_nested_fault_perms(nested, &prot, &writable);
+
+	if (writable)
+		prot |= KVM_PGTABLE_PROT_W;
+
+	if (exec_fault || cpus_have_final_cap(ARM64_HAS_CACHE_DIC))
+		prot |= KVM_PGTABLE_PROT_X;
+
+	if (nested)
+		adjust_nested_exec_perms(kvm, nested, &prot);
+
+	kvm_fault_lock(kvm);
+	if (mmu_invalidate_retry(kvm, mmu_seq)) {
+		ret = -EAGAIN;
+		goto out_unlock;
+	}
+
+	ret = KVM_PGT_FN(kvm_pgtable_stage2_map)(pgt, fault_ipa, PAGE_SIZE,
+						 __pfn_to_phys(pfn), prot,
+						 memcache, flags);
+
+out_unlock:
+	kvm_release_faultin_page(kvm, page, !!ret, writable);
+	kvm_fault_unlock(kvm);
+
+	if (writable && !ret)
+		mark_page_dirty_in_slot(kvm, memslot, gfn);
+
+	return ret != -EAGAIN ? ret : 0;
+}
+
 static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			  struct kvm_s2_trans *nested,
 			  struct kvm_memory_slot *memslot, unsigned long hva,
 			  bool fault_is_perm)
 {
 	int ret = 0;
-	bool write_fault, writable, force_pte = false;
-	bool exec_fault, mte_allowed;
-	bool device = false, vfio_allow_any_uc = false;
+	bool topup_memcache;
+	bool write_fault, writable;
+	bool exec_fault, mte_allowed, is_vma_cacheable;
+	bool s2_force_noncacheable = false, vfio_allow_any_uc = false;
 	unsigned long mmu_seq;
 	phys_addr_t ipa = fault_ipa;
 	struct kvm *kvm = vcpu->kvm;
-	struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache;
 	struct vm_area_struct *vma;
 	short vma_shift;
+	void *memcache;
 	gfn_t gfn;
 	kvm_pfn_t pfn;
 	bool logging_active = memslot_is_logging(memslot);
+	bool force_pte = logging_active;
 	long vma_pagesize, fault_granule;
 	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R;
 	struct kvm_pgtable *pgt;
 	struct page *page;
+	vm_flags_t vm_flags;
+	enum kvm_pgtable_walk_flags flags = KVM_PGTABLE_WALK_MEMABORT_FLAGS;
 
 	if (fault_is_perm)
 		fault_granule = kvm_vcpu_trap_get_perm_fault_granule(vcpu);
 	write_fault = kvm_is_write_fault(vcpu);
 	exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
-	VM_BUG_ON(write_fault && exec_fault);
-
-	if (fault_is_perm && !write_fault && !exec_fault) {
-		kvm_err("Unexpected L2 read permission error\n");
-		return -EFAULT;
-	}
+	VM_WARN_ON_ONCE(write_fault && exec_fault);
 
 	/*
 	 * Permission faults just need to update the existing leaf entry,
@@ -1470,12 +1679,10 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * only exception to this is when dirty logging is enabled at runtime
 	 * and a write fault needs to collapse a block entry into a table.
 	 */
-	if (!fault_is_perm || (logging_active && write_fault)) {
-		ret = kvm_mmu_topup_memory_cache(memcache,
-						 kvm_mmu_cache_min_pages(vcpu->arch.hw_mmu));
-		if (ret)
-			return ret;
-	}
+	topup_memcache = !fault_is_perm || (logging_active && write_fault);
+	ret = prepare_mmu_memcache(vcpu, topup_memcache, &memcache);
+	if (ret)
+		return ret;
 
 	/*
 	 * Let's check if we will get back a huge page backed by hugetlbfs, or
@@ -1489,16 +1696,10 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		return -EFAULT;
 	}
 
-	/*
-	 * logging_active is guaranteed to never be true for VM_PFNMAP
-	 * memslots.
-	 */
-	if (logging_active) {
-		force_pte = true;
+	if (force_pte)
 		vma_shift = PAGE_SHIFT;
-	} else {
+	else
 		vma_shift = get_vma_page_shift(vma, hva);
-	}
 
 	switch (vma_shift) {
 #ifndef __PAGETABLE_PMD_FOLDED
@@ -1550,7 +1751,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			max_map_size = PAGE_SIZE;
 
 		force_pte = (max_map_size == PAGE_SIZE);
-		vma_pagesize = min(vma_pagesize, (long)max_map_size);
+		vma_pagesize = min_t(long, vma_pagesize, max_map_size);
 	}
 
 	/*
@@ -1568,6 +1769,10 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 
 	vfio_allow_any_uc = vma->vm_flags & VM_ALLOW_ANY_UNCACHED;
 
+	vm_flags = vma->vm_flags;
+
+	is_vma_cacheable = kvm_vma_is_cacheable(vma);
+
 	/* Don't use the VMA after the unlock -- it may have vanished */
 	vma = NULL;
 
@@ -1579,7 +1784,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * Rely on mmap_read_unlock() for an implicit smp_rmb(), which pairs
 	 * with the smp_wmb() in kvm_mmu_invalidate_end().
 	 */
-	mmu_seq = vcpu->kvm->mmu_invalidate_seq;
+	mmu_seq = kvm->mmu_invalidate_seq;
 	mmap_read_unlock(current->mm);
 
 	pfn = __kvm_faultin_pfn(memslot, gfn, write_fault ? FOLL_WRITE : 0,
@@ -1591,18 +1796,39 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	if (is_error_noslot_pfn(pfn))
 		return -EFAULT;
 
-	if (kvm_is_device_pfn(pfn)) {
-		/*
-		 * If the page was identified as device early by looking at
-		 * the VMA flags, vma_pagesize is already representing the
-		 * largest quantity we can map.  If instead it was mapped
-		 * via __kvm_faultin_pfn(), vma_pagesize is set to PAGE_SIZE
-		 * and must not be upgraded.
-		 *
-		 * In both cases, we don't let transparent_hugepage_adjust()
-		 * change things at the last minute.
-		 */
-		device = true;
+	/*
+	 * Check if this is non-struct page memory PFN, and cannot support
+	 * CMOs. It could potentially be unsafe to access as cacheable.
+	 */
+	if (vm_flags & (VM_PFNMAP | VM_MIXEDMAP) && !pfn_is_map_memory(pfn)) {
+		if (is_vma_cacheable) {
+			/*
+			 * Whilst the VMA owner expects cacheable mapping to this
+			 * PFN, hardware also has to support the FWB and CACHE DIC
+			 * features.
+			 *
+			 * ARM64 KVM relies on kernel VA mapping to the PFN to
+			 * perform cache maintenance as the CMO instructions work on
+			 * virtual addresses. VM_PFNMAP region are not necessarily
+			 * mapped to a KVA and hence the presence of hardware features
+			 * S2FWB and CACHE DIC are mandatory to avoid the need for
+			 * cache maintenance.
+			 */
+			if (!kvm_supports_cacheable_pfnmap())
+				ret = -EFAULT;
+		} else {
+			/*
+			 * If the page was identified as device early by looking at
+			 * the VMA flags, vma_pagesize is already representing the
+			 * largest quantity we can map.  If instead it was mapped
+			 * via __kvm_faultin_pfn(), vma_pagesize is set to PAGE_SIZE
+			 * and must not be upgraded.
+			 *
+			 * In both cases, we don't let transparent_hugepage_adjust()
+			 * change things at the last minute.
+			 */
+			s2_force_noncacheable = true;
+		}
 	} else if (logging_active && !write_fault) {
 		/*
 		 * Only actually map the page as writable if this was a write
@@ -1611,29 +1837,18 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		writable = false;
 	}
 
-	if (exec_fault && device)
-		return -ENOEXEC;
-
-	/*
-	 * Potentially reduce shadow S2 permissions to match the guest's own
-	 * S2. For exec faults, we'd only reach this point if the guest
-	 * actually allowed it (see kvm_s2_handle_perm_fault).
-	 *
-	 * Also encode the level of the original translation in the SW bits
-	 * of the leaf entry as a proxy for the span of that translation.
-	 * This will be retrieved on TLB invalidation from the guest and
-	 * used to limit the invalidation scope if a TTL hint or a range
-	 * isn't provided.
-	 */
-	if (nested) {
-		writable &= kvm_s2_trans_writable(nested);
-		if (!kvm_s2_trans_readable(nested))
-			prot &= ~KVM_PGTABLE_PROT_R;
+	if (exec_fault && s2_force_noncacheable)
+		ret = -ENOEXEC;
 
-		prot |= kvm_encode_nested_level(nested);
+	if (ret) {
+		kvm_release_page_unused(page);
+		return ret;
 	}
 
-	read_lock(&kvm->mmu_lock);
+	if (nested)
+		adjust_nested_fault_perms(nested, &prot, &writable);
+
+	kvm_fault_lock(kvm);
 	pgt = vcpu->arch.hw_mmu->pgt;
 	if (mmu_invalidate_retry(kvm, mmu_seq)) {
 		ret = -EAGAIN;
@@ -1644,7 +1859,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * If we are not forced to use page mapping, check if we are
 	 * backed by a THP and thus use block mapping if possible.
 	 */
-	if (vma_pagesize == PAGE_SIZE && !(force_pte || device)) {
+	if (vma_pagesize == PAGE_SIZE && !(force_pte || s2_force_noncacheable)) {
 		if (fault_is_perm && fault_granule > PAGE_SIZE)
 			vma_pagesize = fault_granule;
 		else
@@ -1658,7 +1873,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		}
 	}
 
-	if (!fault_is_perm && !device && kvm_has_mte(kvm)) {
+	if (!fault_is_perm && !s2_force_noncacheable && kvm_has_mte(kvm)) {
 		/* Check the VMM hasn't introduced a new disallowed VMA */
 		if (mte_allowed) {
 			sanitise_mte_tags(kvm, pfn, vma_pagesize);
@@ -1674,16 +1889,18 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	if (exec_fault)
 		prot |= KVM_PGTABLE_PROT_X;
 
-	if (device) {
+	if (s2_force_noncacheable) {
 		if (vfio_allow_any_uc)
 			prot |= KVM_PGTABLE_PROT_NORMAL_NC;
 		else
 			prot |= KVM_PGTABLE_PROT_DEVICE;
-	} else if (cpus_have_final_cap(ARM64_HAS_CACHE_DIC) &&
-		   (!nested || kvm_s2_trans_executable(nested))) {
+	} else if (cpus_have_final_cap(ARM64_HAS_CACHE_DIC)) {
 		prot |= KVM_PGTABLE_PROT_X;
 	}
 
+	if (nested)
+		adjust_nested_exec_perms(kvm, nested, &prot);
+
 	/*
 	 * Under the premise of getting a FSC_PERM fault, we just need to relax
 	 * permissions only if vma_pagesize equals fault_granule. Otherwise,
@@ -1695,18 +1912,16 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		 * PTE, which will be preserved.
 		 */
 		prot &= ~KVM_NV_GUEST_MAP_SZ;
-		ret = kvm_pgtable_stage2_relax_perms(pgt, fault_ipa, prot);
+		ret = KVM_PGT_FN(kvm_pgtable_stage2_relax_perms)(pgt, fault_ipa, prot, flags);
 	} else {
-		ret = kvm_pgtable_stage2_map(pgt, fault_ipa, vma_pagesize,
+		ret = KVM_PGT_FN(kvm_pgtable_stage2_map)(pgt, fault_ipa, vma_pagesize,
 					     __pfn_to_phys(pfn), prot,
-					     memcache,
-					     KVM_PGTABLE_WALK_HANDLE_FAULT |
-					     KVM_PGTABLE_WALK_SHARED);
+					     memcache, flags);
 	}
 
 out_unlock:
 	kvm_release_faultin_page(kvm, page, !!ret, writable);
-	read_unlock(&kvm->mmu_lock);
+	kvm_fault_unlock(kvm);
 
 	/* Mark the page dirty only if the fault is handled successfully */
 	if (writable && !ret)
@@ -1718,16 +1933,96 @@ out_unlock:
 /* Resolve the access fault by making the page young again. */
 static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
 {
+	enum kvm_pgtable_walk_flags flags = KVM_PGTABLE_WALK_HANDLE_FAULT | KVM_PGTABLE_WALK_SHARED;
 	struct kvm_s2_mmu *mmu;
 
 	trace_kvm_access_fault(fault_ipa);
 
 	read_lock(&vcpu->kvm->mmu_lock);
 	mmu = vcpu->arch.hw_mmu;
-	kvm_pgtable_stage2_mkyoung(mmu->pgt, fault_ipa);
+	KVM_PGT_FN(kvm_pgtable_stage2_mkyoung)(mmu->pgt, fault_ipa, flags);
 	read_unlock(&vcpu->kvm->mmu_lock);
 }
 
+/*
+ * Returns true if the SEA should be handled locally within KVM if the abort
+ * is caused by a kernel memory allocation (e.g. stage-2 table memory).
+ */
+static bool host_owns_sea(struct kvm_vcpu *vcpu, u64 esr)
+{
+	/*
+	 * Without FEAT_RAS HCR_EL2.TEA is RES0, meaning any external abort
+	 * taken from a guest EL to EL2 is due to a host-imposed access (e.g.
+	 * stage-2 PTW).
+	 */
+	if (!cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
+		return true;
+
+	/* KVM owns the VNCR when the vCPU isn't in a nested context. */
+	if (is_hyp_ctxt(vcpu) && !kvm_vcpu_trap_is_iabt(vcpu) && (esr & ESR_ELx_VNCR))
+		return true;
+
+	/*
+	 * Determining if an external abort during a table walk happened at
+	 * stage-2 is only possible with S1PTW is set. Otherwise, since KVM
+	 * sets HCR_EL2.TEA, SEAs due to a stage-1 walk (i.e. accessing the
+	 * PA of the stage-1 descriptor) can reach here and are reported
+	 * with a TTW ESR value.
+	 */
+	return (esr_fsc_is_sea_ttw(esr) && (esr & ESR_ELx_S1PTW));
+}
+
+int kvm_handle_guest_sea(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+	struct kvm_run *run = vcpu->run;
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+	u64 esr_mask = ESR_ELx_EC_MASK	|
+		       ESR_ELx_IL	|
+		       ESR_ELx_FnV	|
+		       ESR_ELx_EA	|
+		       ESR_ELx_CM	|
+		       ESR_ELx_WNR	|
+		       ESR_ELx_FSC;
+	u64 ipa;
+
+	/*
+	 * Give APEI the opportunity to claim the abort before handling it
+	 * within KVM. apei_claim_sea() expects to be called with IRQs enabled.
+	 */
+	lockdep_assert_irqs_enabled();
+	if (apei_claim_sea(NULL) == 0)
+		return 1;
+
+	if (host_owns_sea(vcpu, esr) ||
+	    !test_bit(KVM_ARCH_FLAG_EXIT_SEA, &vcpu->kvm->arch.flags))
+		return kvm_inject_serror(vcpu);
+
+	/* ESR_ELx.SET is RES0 when FEAT_RAS isn't implemented. */
+	if (kvm_has_ras(kvm))
+		esr_mask |= ESR_ELx_SET_MASK;
+
+	/*
+	 * Exit to userspace, and provide faulting guest virtual and physical
+	 * addresses in case userspace wants to emulate SEA to guest by
+	 * writing to FAR_ELx and HPFAR_ELx registers.
+	 */
+	memset(&run->arm_sea, 0, sizeof(run->arm_sea));
+	run->exit_reason = KVM_EXIT_ARM_SEA;
+	run->arm_sea.esr = esr & esr_mask;
+
+	if (!(esr & ESR_ELx_FnV))
+		run->arm_sea.gva = kvm_vcpu_get_hfar(vcpu);
+
+	ipa = kvm_vcpu_get_fault_ipa(vcpu);
+	if (ipa != INVALID_GPA) {
+		run->arm_sea.flags |= KVM_EXIT_ARM_SEA_FLAG_GPA_VALID;
+		run->arm_sea.gpa = ipa;
+	}
+
+	return 0;
+}
+
 /**
  * kvm_handle_guest_abort - handles all 2nd stage aborts
  * @vcpu:	the VCPU pointer
@@ -1751,9 +2046,19 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 	gfn_t gfn;
 	int ret, idx;
 
+	if (kvm_vcpu_abt_issea(vcpu))
+		return kvm_handle_guest_sea(vcpu);
+
 	esr = kvm_vcpu_get_esr(vcpu);
 
+	/*
+	 * The fault IPA should be reliable at this point as we're not dealing
+	 * with an SEA.
+	 */
 	ipa = fault_ipa = kvm_vcpu_get_fault_ipa(vcpu);
+	if (KVM_BUG_ON(ipa == INVALID_GPA, vcpu->kvm))
+		return -EFAULT;
+
 	is_iabt = kvm_vcpu_trap_is_iabt(vcpu);
 
 	if (esr_fsc_is_translation_fault(esr)) {
@@ -1764,29 +2069,13 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 		}
 
 		/* Falls between the IPA range and the PARange? */
-		if (fault_ipa >= BIT_ULL(vcpu->arch.hw_mmu->pgt->ia_bits)) {
+		if (fault_ipa >= BIT_ULL(VTCR_EL2_IPA(vcpu->arch.hw_mmu->vtcr))) {
 			fault_ipa |= kvm_vcpu_get_hfar(vcpu) & GENMASK(11, 0);
 
-			if (is_iabt)
-				kvm_inject_pabt(vcpu, fault_ipa);
-			else
-				kvm_inject_dabt(vcpu, fault_ipa);
-			return 1;
+			return kvm_inject_sea(vcpu, is_iabt, fault_ipa);
 		}
 	}
 
-	/* Synchronous External Abort? */
-	if (kvm_vcpu_abt_issea(vcpu)) {
-		/*
-		 * For RAS the host kernel may handle this abort.
-		 * There is no need to pass the error into the guest.
-		 */
-		if (kvm_handle_guest_sea(fault_ipa, kvm_vcpu_get_esr(vcpu)))
-			kvm_inject_vabt(vcpu);
-
-		return 1;
-	}
-
 	trace_kvm_guest_fault(*vcpu_pc(vcpu), kvm_vcpu_get_esr(vcpu),
 			      kvm_vcpu_get_hfar(vcpu), fault_ipa);
 
@@ -1821,6 +2110,11 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 		u32 esr;
 
 		ret = kvm_walk_nested_s2(vcpu, fault_ipa, &nested_trans);
+		if (ret == -EAGAIN) {
+			ret = 1;
+			goto out_unlock;
+		}
+
 		if (ret) {
 			esr = kvm_s2_trans_esr(&nested_trans);
 			kvm_inject_s2_fault(vcpu, esr);
@@ -1855,8 +2149,7 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 		}
 
 		if (kvm_vcpu_abt_iss1tw(vcpu)) {
-			kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
-			ret = 1;
+			ret = kvm_inject_sea_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
 			goto out_unlock;
 		}
 
@@ -1896,15 +2189,20 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 		goto out_unlock;
 	}
 
-	ret = user_mem_abort(vcpu, fault_ipa, nested, memslot, hva,
-			     esr_fsc_is_permission_fault(esr));
+	VM_WARN_ON_ONCE(kvm_vcpu_trap_is_permission_fault(vcpu) &&
+			!write_fault && !kvm_vcpu_trap_is_exec_fault(vcpu));
+
+	if (kvm_slot_has_gmem(memslot))
+		ret = gmem_abort(vcpu, fault_ipa, nested, memslot,
+				 esr_fsc_is_permission_fault(esr));
+	else
+		ret = user_mem_abort(vcpu, fault_ipa, nested, memslot, hva,
+				     esr_fsc_is_permission_fault(esr));
 	if (ret == 0)
 		ret = 1;
 out:
-	if (ret == -ENOEXEC) {
-		kvm_inject_pabt(vcpu, kvm_vcpu_get_hfar(vcpu));
-		ret = 1;
-	}
+	if (ret == -ENOEXEC)
+		ret = kvm_inject_sea_iabt(vcpu, kvm_vcpu_get_hfar(vcpu));
 out_unlock:
 	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 	return ret;
@@ -1930,7 +2228,7 @@ bool kvm_age_gfn(struct kvm *kvm, struct kvm_gfn_range *range)
 	if (!kvm->arch.mmu.pgt)
 		return false;
 
-	return kvm_pgtable_stage2_test_clear_young(kvm->arch.mmu.pgt,
+	return KVM_PGT_FN(kvm_pgtable_stage2_test_clear_young)(kvm->arch.mmu.pgt,
 						   range->start << PAGE_SHIFT,
 						   size, true);
 	/*
@@ -1946,7 +2244,7 @@ bool kvm_test_age_gfn(struct kvm *kvm, struct kvm_gfn_range *range)
 	if (!kvm->arch.mmu.pgt)
 		return false;
 
-	return kvm_pgtable_stage2_test_clear_young(kvm->arch.mmu.pgt,
+	return KVM_PGT_FN(kvm_pgtable_stage2_test_clear_young)(kvm->arch.mmu.pgt,
 						   range->start << PAGE_SHIFT,
 						   size, false);
 }
@@ -2056,6 +2354,7 @@ int __init kvm_mmu_init(u32 *hyp_va_bits)
 		goto out_destroy_pgtable;
 
 	io_map_base = hyp_idmap_start;
+	__hyp_va_bits = *hyp_va_bits;
 	return 0;
 
 out_destroy_pgtable:
@@ -2130,6 +2429,13 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 	if ((new->base_gfn + new->npages) > (kvm_phys_size(&kvm->arch.mmu) >> PAGE_SHIFT))
 		return -EFAULT;
 
+	/*
+	 * Only support guest_memfd backed memslots with mappable memory, since
+	 * there aren't any CoCo VMs that support only private memory on arm64.
+	 */
+	if (kvm_slot_has_gmem(new) && !kvm_memslot_is_gmem_only(new))
+		return -EINVAL;
+
 	hva = new->userspace_addr;
 	reg_end = hva + (new->npages << PAGE_SHIFT);
 
@@ -2163,6 +2469,15 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 				ret = -EINVAL;
 				break;
 			}
+
+			/*
+			 * Cacheable PFNMAP is allowed only if the hardware
+			 * supports it.
+			 */
+			if (kvm_vma_is_cacheable(vma) && !kvm_supports_cacheable_pfnmap()) {
+				ret = -EINVAL;
+				break;
+			}
 		}
 		hva = min(reg_end, vma->vm_end);
 	} while (hva < reg_end);
diff --git a/arch/arm64/kvm/nested.c b/arch/arm64/kvm/nested.c
index 9b36218b48de..cdeeb8f09e72 100644
--- a/arch/arm64/kvm/nested.c
+++ b/arch/arm64/kvm/nested.c
@@ -8,6 +8,7 @@
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 
+#include <asm/fixmap.h>
 #include <asm/kvm_arm.h>
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_mmu.h>
@@ -16,8 +17,23 @@
 
 #include "sys_regs.h"
 
-/* Protection against the sysreg repainting madness... */
-#define NV_FTR(r, f)		ID_AA64##r##_EL1_##f
+struct vncr_tlb {
+	/* The guest's VNCR_EL2 */
+	u64			gva;
+	struct s1_walk_info	wi;
+	struct s1_walk_result	wr;
+
+	u64			hpa;
+
+	/* -1 when not mapped on a CPU */
+	int			cpu;
+
+	/*
+	 * true if the TLB is valid. Can only be changed with the
+	 * mmu_lock held.
+	 */
+	bool			valid;
+};
 
 /*
  * Ratio of live shadow S2 MMU per vcpu. This is a trade-off between
@@ -31,6 +47,7 @@ void kvm_init_nested(struct kvm *kvm)
 {
 	kvm->arch.nested_mmus = NULL;
 	kvm->arch.nested_mmus_size = 0;
+	atomic_set(&kvm->arch.vncr_map_count, 0);
 }
 
 static int init_nested_s2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu)
@@ -54,10 +71,21 @@ int kvm_vcpu_init_nested(struct kvm_vcpu *vcpu)
 	struct kvm_s2_mmu *tmp;
 	int num_mmus, ret = 0;
 
+	if (test_bit(KVM_ARM_VCPU_HAS_EL2_E2H0, kvm->arch.vcpu_features) &&
+	    !cpus_have_final_cap(ARM64_HAS_HCR_NV1))
+		return -EINVAL;
+
+	if (!vcpu->arch.ctxt.vncr_array)
+		vcpu->arch.ctxt.vncr_array = (u64 *)__get_free_page(GFP_KERNEL_ACCOUNT |
+								    __GFP_ZERO);
+
+	if (!vcpu->arch.ctxt.vncr_array)
+		return -ENOMEM;
+
 	/*
 	 * Let's treat memory allocation failures as benign: If we fail to
 	 * allocate anything, return an error and keep the allocated array
-	 * alive. Userspace may try to recover by intializing the vcpu
+	 * alive. Userspace may try to recover by initializing the vcpu
 	 * again, and there is no reason to affect the whole VM for this.
 	 */
 	num_mmus = atomic_read(&kvm->online_vcpus) * S2_MMU_PER_VCPU;
@@ -67,39 +95,42 @@ int kvm_vcpu_init_nested(struct kvm_vcpu *vcpu)
 	if (!tmp)
 		return -ENOMEM;
 
+	swap(kvm->arch.nested_mmus, tmp);
+
 	/*
 	 * If we went through a realocation, adjust the MMU back-pointers in
 	 * the previously initialised kvm_pgtable structures.
 	 */
 	if (kvm->arch.nested_mmus != tmp)
 		for (int i = 0; i < kvm->arch.nested_mmus_size; i++)
-			tmp[i].pgt->mmu = &tmp[i];
+			kvm->arch.nested_mmus[i].pgt->mmu = &kvm->arch.nested_mmus[i];
 
 	for (int i = kvm->arch.nested_mmus_size; !ret && i < num_mmus; i++)
-		ret = init_nested_s2_mmu(kvm, &tmp[i]);
+		ret = init_nested_s2_mmu(kvm, &kvm->arch.nested_mmus[i]);
 
 	if (ret) {
 		for (int i = kvm->arch.nested_mmus_size; i < num_mmus; i++)
-			kvm_free_stage2_pgd(&tmp[i]);
+			kvm_free_stage2_pgd(&kvm->arch.nested_mmus[i]);
+
+		free_page((unsigned long)vcpu->arch.ctxt.vncr_array);
+		vcpu->arch.ctxt.vncr_array = NULL;
 
 		return ret;
 	}
 
 	kvm->arch.nested_mmus_size = num_mmus;
-	kvm->arch.nested_mmus = tmp;
 
 	return 0;
 }
 
 struct s2_walk_info {
-	int	     (*read_desc)(phys_addr_t pa, u64 *desc, void *data);
-	void	     *data;
-	u64	     baddr;
-	unsigned int max_oa_bits;
-	unsigned int pgshift;
-	unsigned int sl;
-	unsigned int t0sz;
-	bool	     be;
+	u64		baddr;
+	unsigned int	max_oa_bits;
+	unsigned int	pgshift;
+	unsigned int	sl;
+	unsigned int	t0sz;
+	bool		be;
+	bool		ha;
 };
 
 static u32 compute_fsc(int level, u32 fsc)
@@ -167,6 +198,42 @@ static int check_output_size(struct s2_walk_info *wi, phys_addr_t output)
 	return 0;
 }
 
+static int read_guest_s2_desc(struct kvm_vcpu *vcpu, phys_addr_t pa, u64 *desc,
+			      struct s2_walk_info *wi)
+{
+	u64 val;
+	int r;
+
+	r = kvm_read_guest(vcpu->kvm, pa, &val, sizeof(val));
+	if (r)
+		return r;
+
+	/*
+	 * Handle reversedescriptors if endianness differs between the
+	 * host and the guest hypervisor.
+	 */
+	if (wi->be)
+		*desc = be64_to_cpu((__force __be64)val);
+	else
+		*desc = le64_to_cpu((__force __le64)val);
+
+	return 0;
+}
+
+static int swap_guest_s2_desc(struct kvm_vcpu *vcpu, phys_addr_t pa, u64 old, u64 new,
+			      struct s2_walk_info *wi)
+{
+	if (wi->be) {
+		old = (__force u64)cpu_to_be64(old);
+		new = (__force u64)cpu_to_be64(new);
+	} else {
+		old = (__force u64)cpu_to_le64(old);
+		new = (__force u64)cpu_to_le64(new);
+	}
+
+	return __kvm_at_swap_desc(vcpu->kvm, pa, old, new);
+}
+
 /*
  * This is essentially a C-version of the pseudo code from the ARM ARM
  * AArch64.TranslationTableWalk  function.  I strongly recommend looking at
@@ -174,13 +241,13 @@ static int check_output_size(struct s2_walk_info *wi, phys_addr_t output)
  *
  * Must be called with the kvm->srcu read lock held
  */
-static int walk_nested_s2_pgd(phys_addr_t ipa,
+static int walk_nested_s2_pgd(struct kvm_vcpu *vcpu, phys_addr_t ipa,
 			      struct s2_walk_info *wi, struct kvm_s2_trans *out)
 {
 	int first_block_level, level, stride, input_size, base_lower_bound;
 	phys_addr_t base_addr;
 	unsigned int addr_top, addr_bottom;
-	u64 desc;  /* page table entry */
+	u64 desc, new_desc;  /* page table entry */
 	int ret;
 	phys_addr_t paddr;
 
@@ -225,28 +292,30 @@ static int walk_nested_s2_pgd(phys_addr_t ipa,
 			>> (addr_bottom - 3);
 
 		paddr = base_addr | index;
-		ret = wi->read_desc(paddr, &desc, wi->data);
+		ret = read_guest_s2_desc(vcpu, paddr, &desc, wi);
 		if (ret < 0)
 			return ret;
 
-		/*
-		 * Handle reversedescriptors if endianness differs between the
-		 * host and the guest hypervisor.
-		 */
-		if (wi->be)
-			desc = be64_to_cpu((__force __be64)desc);
-		else
-			desc = le64_to_cpu((__force __le64)desc);
+		new_desc = desc;
 
 		/* Check for valid descriptor at this point */
-		if (!(desc & 1) || ((desc & 3) == 1 && level == 3)) {
+		if (!(desc & KVM_PTE_VALID)) {
 			out->esr = compute_fsc(level, ESR_ELx_FSC_FAULT);
 			out->desc = desc;
 			return 1;
 		}
 
-		/* We're at the final level or block translation level */
-		if ((desc & 3) == 1 || level == 3)
+		if (FIELD_GET(KVM_PTE_TYPE, desc) == KVM_PTE_TYPE_BLOCK) {
+			if (level < 3)
+				break;
+
+			out->esr = compute_fsc(level, ESR_ELx_FSC_FAULT);
+			out->desc = desc;
+			return 1;
+		}
+
+		/* We're at the final level */
+		if (level == 3)
 			break;
 
 		if (check_output_size(wi, desc)) {
@@ -273,7 +342,18 @@ static int walk_nested_s2_pgd(phys_addr_t ipa,
 		return 1;
 	}
 
-	if (!(desc & BIT(10))) {
+	if (wi->ha)
+		new_desc |= KVM_PTE_LEAF_ATTR_LO_S2_AF;
+
+	if (new_desc != desc) {
+		ret = swap_guest_s2_desc(vcpu, paddr, desc, new_desc, wi);
+		if (ret)
+			return ret;
+
+		desc = new_desc;
+	}
+
+	if (!(desc & KVM_PTE_LEAF_ATTR_LO_S2_AF)) {
 		out->esr = compute_fsc(level, ESR_ELx_FSC_ACCESS);
 		out->desc = desc;
 		return 1;
@@ -286,20 +366,13 @@ static int walk_nested_s2_pgd(phys_addr_t ipa,
 		(ipa & GENMASK_ULL(addr_bottom - 1, 0));
 	out->output = paddr;
 	out->block_size = 1UL << ((3 - level) * stride + wi->pgshift);
-	out->readable = desc & (0b01 << 6);
-	out->writable = desc & (0b10 << 6);
+	out->readable = desc & KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R;
+	out->writable = desc & KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W;
 	out->level = level;
 	out->desc = desc;
 	return 0;
 }
 
-static int read_guest_s2_desc(phys_addr_t pa, u64 *desc, void *data)
-{
-	struct kvm_vcpu *vcpu = data;
-
-	return kvm_read_guest(vcpu->kvm, pa, desc, sizeof(*desc));
-}
-
 static void vtcr_to_walk_info(u64 vtcr, struct s2_walk_info *wi)
 {
 	wi->t0sz = vtcr & TCR_EL2_T0SZ_MASK;
@@ -317,7 +390,9 @@ static void vtcr_to_walk_info(u64 vtcr, struct s2_walk_info *wi)
 	wi->sl = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr);
 	/* Global limit for now, should eventually be per-VM */
 	wi->max_oa_bits = min(get_kvm_ipa_limit(),
-			      ps_to_output_size(FIELD_GET(VTCR_EL2_PS_MASK, vtcr)));
+			      ps_to_output_size(FIELD_GET(VTCR_EL2_PS_MASK, vtcr), false));
+
+	wi->ha = vtcr & VTCR_EL2_HA;
 }
 
 int kvm_walk_nested_s2(struct kvm_vcpu *vcpu, phys_addr_t gipa,
@@ -332,15 +407,13 @@ int kvm_walk_nested_s2(struct kvm_vcpu *vcpu, phys_addr_t gipa,
 	if (!vcpu_has_nv(vcpu))
 		return 0;
 
-	wi.read_desc = read_guest_s2_desc;
-	wi.data = vcpu;
 	wi.baddr = vcpu_read_sys_reg(vcpu, VTTBR_EL2);
 
 	vtcr_to_walk_info(vtcr, &wi);
 
 	wi.be = vcpu_read_sys_reg(vcpu, SCTLR_EL2) & SCTLR_ELx_EE;
 
-	ret = walk_nested_s2_pgd(gipa, &wi, result);
+	ret = walk_nested_s2_pgd(vcpu, gipa, &wi, result);
 	if (ret)
 		result->esr |= (kvm_vcpu_get_esr(vcpu) & ~ESR_ELx_FSC);
 
@@ -403,6 +476,30 @@ static unsigned int ttl_to_size(u8 ttl)
 	return max_size;
 }
 
+static u8 pgshift_level_to_ttl(u16 shift, u8 level)
+{
+	u8 ttl;
+
+	switch(shift) {
+	case 12:
+		ttl = TLBI_TTL_TG_4K;
+		break;
+	case 14:
+		ttl = TLBI_TTL_TG_16K;
+		break;
+	case 16:
+		ttl = TLBI_TTL_TG_64K;
+		break;
+	default:
+		BUG();
+	}
+
+	ttl <<= 2;
+	ttl |= level & 3;
+
+	return ttl;
+}
+
 /*
  * Compute the equivalent of the TTL field by parsing the shadow PT.  The
  * granule size is extracted from the cached VTCR_EL2.TG0 while the level is
@@ -674,23 +771,36 @@ void kvm_init_nested_s2_mmu(struct kvm_s2_mmu *mmu)
 void kvm_vcpu_load_hw_mmu(struct kvm_vcpu *vcpu)
 {
 	/*
-	 * The vCPU kept its reference on the MMU after the last put, keep
-	 * rolling with it.
+	 * If the vCPU kept its reference on the MMU after the last put,
+	 * keep rolling with it.
 	 */
-	if (vcpu->arch.hw_mmu)
-		return;
-
 	if (is_hyp_ctxt(vcpu)) {
-		vcpu->arch.hw_mmu = &vcpu->kvm->arch.mmu;
+		if (!vcpu->arch.hw_mmu)
+			vcpu->arch.hw_mmu = &vcpu->kvm->arch.mmu;
 	} else {
-		write_lock(&vcpu->kvm->mmu_lock);
-		vcpu->arch.hw_mmu = get_s2_mmu_nested(vcpu);
-		write_unlock(&vcpu->kvm->mmu_lock);
+		if (!vcpu->arch.hw_mmu) {
+			scoped_guard(write_lock, &vcpu->kvm->mmu_lock)
+				vcpu->arch.hw_mmu = get_s2_mmu_nested(vcpu);
+		}
+
+		if (__vcpu_sys_reg(vcpu, HCR_EL2) & HCR_NV)
+			kvm_make_request(KVM_REQ_MAP_L1_VNCR_EL2, vcpu);
 	}
 }
 
 void kvm_vcpu_put_hw_mmu(struct kvm_vcpu *vcpu)
 {
+	/* Unconditionally drop the VNCR mapping if we have one */
+	if (host_data_test_flag(L1_VNCR_MAPPED)) {
+		BUG_ON(vcpu->arch.vncr_tlb->cpu != smp_processor_id());
+		BUG_ON(is_hyp_ctxt(vcpu));
+
+		clear_fixmap(vncr_fixmap(vcpu->arch.vncr_tlb->cpu));
+		vcpu->arch.vncr_tlb->cpu = -1;
+		host_data_clear_flag(L1_VNCR_MAPPED);
+		atomic_dec(&vcpu->kvm->arch.vncr_map_count);
+	}
+
 	/*
 	 * Keep a reference on the associated stage-2 MMU if the vCPU is
 	 * scheduling out and not in WFI emulation, suggesting it is likely to
@@ -719,7 +829,10 @@ int kvm_s2_handle_perm_fault(struct kvm_vcpu *vcpu, struct kvm_s2_trans *trans)
 		return 0;
 
 	if (kvm_vcpu_trap_is_iabt(vcpu)) {
-		forward_fault = !kvm_s2_trans_executable(trans);
+		if (vcpu_mode_priv(vcpu))
+			forward_fault = !kvm_s2_trans_exec_el1(vcpu->kvm, trans);
+		else
+			forward_fault = !kvm_s2_trans_exec_el0(vcpu->kvm, trans);
 	} else {
 		bool write_fault = kvm_is_write_fault(vcpu);
 
@@ -741,6 +854,247 @@ int kvm_inject_s2_fault(struct kvm_vcpu *vcpu, u64 esr_el2)
 	return kvm_inject_nested_sync(vcpu, esr_el2);
 }
 
+static void invalidate_vncr(struct vncr_tlb *vt)
+{
+	vt->valid = false;
+	if (vt->cpu != -1)
+		clear_fixmap(vncr_fixmap(vt->cpu));
+}
+
+static void kvm_invalidate_vncr_ipa(struct kvm *kvm, u64 start, u64 end)
+{
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+
+	lockdep_assert_held_write(&kvm->mmu_lock);
+
+	if (!kvm_has_feat(kvm, ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY))
+		return;
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+		u64 ipa_start, ipa_end, ipa_size;
+
+		/*
+		 * Careful here: We end-up here from an MMU notifier,
+		 * and this can race against a vcpu not being onlined
+		 * yet, without the pseudo-TLB being allocated.
+		 *
+		 * Skip those, as they obviously don't participate in
+		 * the invalidation at this stage.
+		 */
+		if (!vt)
+			continue;
+
+		if (!vt->valid)
+			continue;
+
+		ipa_size = ttl_to_size(pgshift_level_to_ttl(vt->wi.pgshift,
+							    vt->wr.level));
+		ipa_start = vt->wr.pa & ~(ipa_size - 1);
+		ipa_end = ipa_start + ipa_size;
+
+		if (ipa_end <= start || ipa_start >= end)
+			continue;
+
+		invalidate_vncr(vt);
+	}
+}
+
+struct s1e2_tlbi_scope {
+	enum {
+		TLBI_ALL,
+		TLBI_VA,
+		TLBI_VAA,
+		TLBI_ASID,
+	} type;
+
+	u16 asid;
+	u64 va;
+	u64 size;
+};
+
+static void invalidate_vncr_va(struct kvm *kvm,
+			       struct s1e2_tlbi_scope *scope)
+{
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+
+	lockdep_assert_held_write(&kvm->mmu_lock);
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+		u64 va_start, va_end, va_size;
+
+		if (!vt->valid)
+			continue;
+
+		va_size = ttl_to_size(pgshift_level_to_ttl(vt->wi.pgshift,
+							   vt->wr.level));
+		va_start = vt->gva & ~(va_size - 1);
+		va_end = va_start + va_size;
+
+		switch (scope->type) {
+		case TLBI_ALL:
+			break;
+
+		case TLBI_VA:
+			if (va_end <= scope->va ||
+			    va_start >= (scope->va + scope->size))
+				continue;
+			if (vt->wr.nG && vt->wr.asid != scope->asid)
+				continue;
+			break;
+
+		case TLBI_VAA:
+			if (va_end <= scope->va ||
+			    va_start >= (scope->va + scope->size))
+				continue;
+			break;
+
+		case TLBI_ASID:
+			if (!vt->wr.nG || vt->wr.asid != scope->asid)
+				continue;
+			break;
+		}
+
+		invalidate_vncr(vt);
+	}
+}
+
+#define tlbi_va_s1_to_va(v)	(u64)sign_extend64((v) << 12, 48)
+
+static void compute_s1_tlbi_range(struct kvm_vcpu *vcpu, u32 inst, u64 val,
+				  struct s1e2_tlbi_scope *scope)
+{
+	switch (inst) {
+	case OP_TLBI_ALLE2:
+	case OP_TLBI_ALLE2IS:
+	case OP_TLBI_ALLE2OS:
+	case OP_TLBI_VMALLE1:
+	case OP_TLBI_VMALLE1IS:
+	case OP_TLBI_VMALLE1OS:
+	case OP_TLBI_ALLE2NXS:
+	case OP_TLBI_ALLE2ISNXS:
+	case OP_TLBI_ALLE2OSNXS:
+	case OP_TLBI_VMALLE1NXS:
+	case OP_TLBI_VMALLE1ISNXS:
+	case OP_TLBI_VMALLE1OSNXS:
+		scope->type = TLBI_ALL;
+		break;
+	case OP_TLBI_VAE2:
+	case OP_TLBI_VAE2IS:
+	case OP_TLBI_VAE2OS:
+	case OP_TLBI_VAE1:
+	case OP_TLBI_VAE1IS:
+	case OP_TLBI_VAE1OS:
+	case OP_TLBI_VAE2NXS:
+	case OP_TLBI_VAE2ISNXS:
+	case OP_TLBI_VAE2OSNXS:
+	case OP_TLBI_VAE1NXS:
+	case OP_TLBI_VAE1ISNXS:
+	case OP_TLBI_VAE1OSNXS:
+	case OP_TLBI_VALE2:
+	case OP_TLBI_VALE2IS:
+	case OP_TLBI_VALE2OS:
+	case OP_TLBI_VALE1:
+	case OP_TLBI_VALE1IS:
+	case OP_TLBI_VALE1OS:
+	case OP_TLBI_VALE2NXS:
+	case OP_TLBI_VALE2ISNXS:
+	case OP_TLBI_VALE2OSNXS:
+	case OP_TLBI_VALE1NXS:
+	case OP_TLBI_VALE1ISNXS:
+	case OP_TLBI_VALE1OSNXS:
+		scope->type = TLBI_VA;
+		scope->size = ttl_to_size(FIELD_GET(TLBI_TTL_MASK, val));
+		if (!scope->size)
+			scope->size = SZ_1G;
+		scope->va = tlbi_va_s1_to_va(val) & ~(scope->size - 1);
+		scope->asid = FIELD_GET(TLBIR_ASID_MASK, val);
+		break;
+	case OP_TLBI_ASIDE1:
+	case OP_TLBI_ASIDE1IS:
+	case OP_TLBI_ASIDE1OS:
+	case OP_TLBI_ASIDE1NXS:
+	case OP_TLBI_ASIDE1ISNXS:
+	case OP_TLBI_ASIDE1OSNXS:
+		scope->type = TLBI_ASID;
+		scope->asid = FIELD_GET(TLBIR_ASID_MASK, val);
+		break;
+	case OP_TLBI_VAAE1:
+	case OP_TLBI_VAAE1IS:
+	case OP_TLBI_VAAE1OS:
+	case OP_TLBI_VAAE1NXS:
+	case OP_TLBI_VAAE1ISNXS:
+	case OP_TLBI_VAAE1OSNXS:
+	case OP_TLBI_VAALE1:
+	case OP_TLBI_VAALE1IS:
+	case OP_TLBI_VAALE1OS:
+	case OP_TLBI_VAALE1NXS:
+	case OP_TLBI_VAALE1ISNXS:
+	case OP_TLBI_VAALE1OSNXS:
+		scope->type = TLBI_VAA;
+		scope->size = ttl_to_size(FIELD_GET(TLBI_TTL_MASK, val));
+		if (!scope->size)
+			scope->size = SZ_1G;
+		scope->va = tlbi_va_s1_to_va(val) & ~(scope->size - 1);
+		break;
+	case OP_TLBI_RVAE2:
+	case OP_TLBI_RVAE2IS:
+	case OP_TLBI_RVAE2OS:
+	case OP_TLBI_RVAE1:
+	case OP_TLBI_RVAE1IS:
+	case OP_TLBI_RVAE1OS:
+	case OP_TLBI_RVAE2NXS:
+	case OP_TLBI_RVAE2ISNXS:
+	case OP_TLBI_RVAE2OSNXS:
+	case OP_TLBI_RVAE1NXS:
+	case OP_TLBI_RVAE1ISNXS:
+	case OP_TLBI_RVAE1OSNXS:
+	case OP_TLBI_RVALE2:
+	case OP_TLBI_RVALE2IS:
+	case OP_TLBI_RVALE2OS:
+	case OP_TLBI_RVALE1:
+	case OP_TLBI_RVALE1IS:
+	case OP_TLBI_RVALE1OS:
+	case OP_TLBI_RVALE2NXS:
+	case OP_TLBI_RVALE2ISNXS:
+	case OP_TLBI_RVALE2OSNXS:
+	case OP_TLBI_RVALE1NXS:
+	case OP_TLBI_RVALE1ISNXS:
+	case OP_TLBI_RVALE1OSNXS:
+		scope->type = TLBI_VA;
+		scope->va = decode_range_tlbi(val, &scope->size, &scope->asid);
+		break;
+	case OP_TLBI_RVAAE1:
+	case OP_TLBI_RVAAE1IS:
+	case OP_TLBI_RVAAE1OS:
+	case OP_TLBI_RVAAE1NXS:
+	case OP_TLBI_RVAAE1ISNXS:
+	case OP_TLBI_RVAAE1OSNXS:
+	case OP_TLBI_RVAALE1:
+	case OP_TLBI_RVAALE1IS:
+	case OP_TLBI_RVAALE1OS:
+	case OP_TLBI_RVAALE1NXS:
+	case OP_TLBI_RVAALE1ISNXS:
+	case OP_TLBI_RVAALE1OSNXS:
+		scope->type = TLBI_VAA;
+		scope->va = decode_range_tlbi(val, &scope->size, NULL);
+		break;
+	}
+}
+
+void kvm_handle_s1e2_tlbi(struct kvm_vcpu *vcpu, u32 inst, u64 val)
+{
+	struct s1e2_tlbi_scope scope = {};
+
+	compute_s1_tlbi_range(vcpu, inst, val, &scope);
+
+	guard(write_lock)(&vcpu->kvm->mmu_lock);
+	invalidate_vncr_va(vcpu->kvm, &scope);
+}
+
 void kvm_nested_s2_wp(struct kvm *kvm)
 {
 	int i;
@@ -753,6 +1107,8 @@ void kvm_nested_s2_wp(struct kvm *kvm)
 		if (kvm_s2_mmu_valid(mmu))
 			kvm_stage2_wp_range(mmu, 0, kvm_phys_size(mmu));
 	}
+
+	kvm_invalidate_vncr_ipa(kvm, 0, BIT(kvm->arch.mmu.pgt->ia_bits));
 }
 
 void kvm_nested_s2_unmap(struct kvm *kvm, bool may_block)
@@ -767,6 +1123,8 @@ void kvm_nested_s2_unmap(struct kvm *kvm, bool may_block)
 		if (kvm_s2_mmu_valid(mmu))
 			kvm_stage2_unmap_range(mmu, 0, kvm_phys_size(mmu), may_block);
 	}
+
+	kvm_invalidate_vncr_ipa(kvm, 0, BIT(kvm->arch.mmu.pgt->ia_bits));
 }
 
 void kvm_nested_s2_flush(struct kvm *kvm)
@@ -800,138 +1158,512 @@ void kvm_arch_flush_shadow_all(struct kvm *kvm)
 }
 
 /*
+ * Dealing with VNCR_EL2 exposed by the *guest* is a complicated matter:
+ *
+ * - We introduce an internal representation of a vcpu-private TLB,
+ *   representing the mapping between the guest VA contained in VNCR_EL2,
+ *   the IPA the guest's EL2 PTs point to, and the actual PA this lives at.
+ *
+ * - On translation fault from a nested VNCR access, we create such a TLB.
+ *   If there is no mapping to describe, the guest inherits the fault.
+ *   Crucially, no actual mapping is done at this stage.
+ *
+ * - On vcpu_load() in a non-HYP context with HCR_EL2.NV==1, if the above
+ *   TLB exists, we map it in the fixmap for this CPU, and run with it. We
+ *   have to respect the permissions dictated by the guest, but not the
+ *   memory type (FWB is a must).
+ *
+ * - Note that we usually don't do a vcpu_load() on the back of a fault
+ *   (unless we are preempted), so the resolution of a translation fault
+ *   must go via a request that will map the VNCR page in the fixmap.
+ *   vcpu_load() might as well use the same mechanism.
+ *
+ * - On vcpu_put() in a non-HYP context with HCR_EL2.NV==1, if the TLB was
+ *   mapped, we unmap it. Yes it is that simple. The TLB still exists
+ *   though, and may be reused at a later load.
+ *
+ * - On permission fault, we simply forward the fault to the guest's EL2.
+ *   Get out of my way.
+ *
+ * - On any TLBI for the EL2&0 translation regime, we must find any TLB that
+ *   intersects with the TLBI request, invalidate it, and unmap the page
+ *   from the fixmap. Because we need to look at all the vcpu-private TLBs,
+ *   this requires some wide-ranging locking to ensure that nothing races
+ *   against it. This may require some refcounting to avoid the search when
+ *   no such TLB is present.
+ *
+ * - On MMU notifiers, we must invalidate our TLB in a similar way, but
+ *   looking at the IPA instead. The funny part is that there may not be a
+ *   stage-2 mapping for this page if L1 hasn't accessed it using LD/ST
+ *   instructions.
+ */
+
+int kvm_vcpu_allocate_vncr_tlb(struct kvm_vcpu *vcpu)
+{
+	if (!kvm_has_feat(vcpu->kvm, ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY))
+		return 0;
+
+	vcpu->arch.vncr_tlb = kzalloc(sizeof(*vcpu->arch.vncr_tlb),
+				      GFP_KERNEL_ACCOUNT);
+	if (!vcpu->arch.vncr_tlb)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static u64 read_vncr_el2(struct kvm_vcpu *vcpu)
+{
+	return (u64)sign_extend64(__vcpu_sys_reg(vcpu, VNCR_EL2), 48);
+}
+
+static int kvm_translate_vncr(struct kvm_vcpu *vcpu, bool *is_gmem)
+{
+	struct kvm_memory_slot *memslot;
+	bool write_fault, writable;
+	unsigned long mmu_seq;
+	struct vncr_tlb *vt;
+	struct page *page;
+	u64 va, pfn, gfn;
+	int ret;
+
+	vt = vcpu->arch.vncr_tlb;
+
+	/*
+	 * If we're about to walk the EL2 S1 PTs, we must invalidate the
+	 * current TLB, as it could be sampled from another vcpu doing a
+	 * TLBI *IS. A real CPU wouldn't do that, but we only keep a single
+	 * translation, so not much of a choice.
+	 *
+	 * We also prepare the next walk wilst we're at it.
+	 */
+	scoped_guard(write_lock, &vcpu->kvm->mmu_lock) {
+		invalidate_vncr(vt);
+
+		vt->wi = (struct s1_walk_info) {
+			.regime	= TR_EL20,
+			.as_el0	= false,
+			.pan	= false,
+		};
+		vt->wr = (struct s1_walk_result){};
+	}
+
+	guard(srcu)(&vcpu->kvm->srcu);
+
+	va =  read_vncr_el2(vcpu);
+
+	ret = __kvm_translate_va(vcpu, &vt->wi, &vt->wr, va);
+	if (ret)
+		return ret;
+
+	write_fault = kvm_is_write_fault(vcpu);
+
+	mmu_seq = vcpu->kvm->mmu_invalidate_seq;
+	smp_rmb();
+
+	gfn = vt->wr.pa >> PAGE_SHIFT;
+	memslot = gfn_to_memslot(vcpu->kvm, gfn);
+	if (!memslot)
+		return -EFAULT;
+
+	*is_gmem = kvm_slot_has_gmem(memslot);
+	if (!*is_gmem) {
+		pfn = __kvm_faultin_pfn(memslot, gfn, write_fault ? FOLL_WRITE : 0,
+					&writable, &page);
+		if (is_error_noslot_pfn(pfn) || (write_fault && !writable))
+			return -EFAULT;
+	} else {
+		ret = kvm_gmem_get_pfn(vcpu->kvm, memslot, gfn, &pfn, &page, NULL);
+		if (ret) {
+			kvm_prepare_memory_fault_exit(vcpu, vt->wr.pa, PAGE_SIZE,
+					      write_fault, false, false);
+			return ret;
+		}
+	}
+
+	scoped_guard(write_lock, &vcpu->kvm->mmu_lock) {
+		if (mmu_invalidate_retry(vcpu->kvm, mmu_seq))
+			return -EAGAIN;
+
+		vt->gva = va;
+		vt->hpa = pfn << PAGE_SHIFT;
+		vt->valid = true;
+		vt->cpu = -1;
+
+		kvm_make_request(KVM_REQ_MAP_L1_VNCR_EL2, vcpu);
+		kvm_release_faultin_page(vcpu->kvm, page, false, vt->wr.pw);
+	}
+
+	if (vt->wr.pw)
+		mark_page_dirty(vcpu->kvm, gfn);
+
+	return 0;
+}
+
+static void inject_vncr_perm(struct kvm_vcpu *vcpu)
+{
+	struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+
+	/* Adjust the fault level to reflect that of the guest's */
+	esr &= ~ESR_ELx_FSC;
+	esr |= FIELD_PREP(ESR_ELx_FSC,
+			  ESR_ELx_FSC_PERM_L(vt->wr.level));
+
+	kvm_inject_nested_sync(vcpu, esr);
+}
+
+static bool kvm_vncr_tlb_lookup(struct kvm_vcpu *vcpu)
+{
+	struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+
+	lockdep_assert_held_read(&vcpu->kvm->mmu_lock);
+
+	if (!vt->valid)
+		return false;
+
+	if (read_vncr_el2(vcpu) != vt->gva)
+		return false;
+
+	if (vt->wr.nG) {
+		u64 tcr = vcpu_read_sys_reg(vcpu, TCR_EL2);
+		u64 ttbr = ((tcr & TCR_A1) ?
+			    vcpu_read_sys_reg(vcpu, TTBR1_EL2) :
+			    vcpu_read_sys_reg(vcpu, TTBR0_EL2));
+		u16 asid;
+
+		asid = FIELD_GET(TTBR_ASID_MASK, ttbr);
+		if (!kvm_has_feat_enum(vcpu->kvm, ID_AA64MMFR0_EL1, ASIDBITS, 16) ||
+		    !(tcr & TCR_ASID16))
+			asid &= GENMASK(7, 0);
+
+		return asid == vt->wr.asid;
+	}
+
+	return true;
+}
+
+int kvm_handle_vncr_abort(struct kvm_vcpu *vcpu)
+{
+	struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+
+	WARN_ON_ONCE(!(esr & ESR_ELx_VNCR));
+
+	if (kvm_vcpu_abt_issea(vcpu))
+		return kvm_handle_guest_sea(vcpu);
+
+	if (esr_fsc_is_permission_fault(esr)) {
+		inject_vncr_perm(vcpu);
+	} else if (esr_fsc_is_translation_fault(esr)) {
+		bool valid, is_gmem = false;
+		int ret;
+
+		scoped_guard(read_lock, &vcpu->kvm->mmu_lock)
+			valid = kvm_vncr_tlb_lookup(vcpu);
+
+		if (!valid)
+			ret = kvm_translate_vncr(vcpu, &is_gmem);
+		else
+			ret = -EPERM;
+
+		switch (ret) {
+		case -EAGAIN:
+			/* Let's try again... */
+			break;
+		case -ENOMEM:
+			/*
+			 * For guest_memfd, this indicates that it failed to
+			 * create a folio to back the memory. Inform userspace.
+			 */
+			if (is_gmem)
+				return 0;
+			/* Otherwise, let's try again... */
+			break;
+		case -EFAULT:
+		case -EIO:
+		case -EHWPOISON:
+			if (is_gmem)
+				return 0;
+			fallthrough;
+		case -EINVAL:
+		case -ENOENT:
+		case -EACCES:
+			/*
+			 * Translation failed, inject the corresponding
+			 * exception back to EL2.
+			 */
+			BUG_ON(!vt->wr.failed);
+
+			esr &= ~ESR_ELx_FSC;
+			esr |= FIELD_PREP(ESR_ELx_FSC, vt->wr.fst);
+
+			kvm_inject_nested_sync(vcpu, esr);
+			break;
+		case -EPERM:
+			/* Hack to deal with POE until we get kernel support */
+			inject_vncr_perm(vcpu);
+			break;
+		case 0:
+			break;
+		}
+	} else {
+		WARN_ONCE(1, "Unhandled VNCR abort, ESR=%llx\n", esr);
+	}
+
+	return 1;
+}
+
+static void kvm_map_l1_vncr(struct kvm_vcpu *vcpu)
+{
+	struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
+	pgprot_t prot;
+
+	guard(preempt)();
+	guard(read_lock)(&vcpu->kvm->mmu_lock);
+
+	/*
+	 * The request to map VNCR may have raced against some other
+	 * event, such as an interrupt, and may not be valid anymore.
+	 */
+	if (is_hyp_ctxt(vcpu))
+		return;
+
+	/*
+	 * Check that the pseudo-TLB is valid and that VNCR_EL2 still
+	 * contains the expected value. If it doesn't, we simply bail out
+	 * without a mapping -- a transformed MSR/MRS will generate the
+	 * fault and allows us to populate the pseudo-TLB.
+	 */
+	if (!vt->valid)
+		return;
+
+	if (read_vncr_el2(vcpu) != vt->gva)
+		return;
+
+	if (vt->wr.nG) {
+		u64 tcr = vcpu_read_sys_reg(vcpu, TCR_EL2);
+		u64 ttbr = ((tcr & TCR_A1) ?
+			    vcpu_read_sys_reg(vcpu, TTBR1_EL2) :
+			    vcpu_read_sys_reg(vcpu, TTBR0_EL2));
+		u16 asid;
+
+		asid = FIELD_GET(TTBR_ASID_MASK, ttbr);
+		if (!kvm_has_feat_enum(vcpu->kvm, ID_AA64MMFR0_EL1, ASIDBITS, 16) ||
+		    !(tcr & TCR_ASID16))
+			asid &= GENMASK(7, 0);
+
+		if (asid != vt->wr.asid)
+			return;
+	}
+
+	vt->cpu = smp_processor_id();
+
+	if (vt->wr.pw && vt->wr.pr)
+		prot = PAGE_KERNEL;
+	else if (vt->wr.pr)
+		prot = PAGE_KERNEL_RO;
+	else
+		prot = PAGE_NONE;
+
+	/*
+	 * We can't map write-only (or no permission at all) in the kernel,
+	 * but the guest can do it if using POE, so we'll have to turn a
+	 * translation fault into a permission fault at runtime.
+	 * FIXME: WO doesn't work at all, need POE support in the kernel.
+	 */
+	if (pgprot_val(prot) != pgprot_val(PAGE_NONE)) {
+		__set_fixmap(vncr_fixmap(vt->cpu), vt->hpa, prot);
+		host_data_set_flag(L1_VNCR_MAPPED);
+		atomic_inc(&vcpu->kvm->arch.vncr_map_count);
+	}
+}
+
+#define has_tgran_2(__r, __sz)						\
+	({								\
+		u64 _s1, _s2, _mmfr0 = __r;				\
+									\
+		_s2 = SYS_FIELD_GET(ID_AA64MMFR0_EL1,			\
+				    TGRAN##__sz##_2, _mmfr0);		\
+									\
+		_s1 = SYS_FIELD_GET(ID_AA64MMFR0_EL1,			\
+				    TGRAN##__sz, _mmfr0);		\
+									\
+		((_s2 != ID_AA64MMFR0_EL1_TGRAN##__sz##_2_NI &&		\
+		  _s2 != ID_AA64MMFR0_EL1_TGRAN##__sz##_2_TGRAN##__sz) || \
+		 (_s2 == ID_AA64MMFR0_EL1_TGRAN##__sz##_2_TGRAN##__sz && \
+		  _s1 != ID_AA64MMFR0_EL1_TGRAN##__sz##_NI));		\
+	})
+/*
  * Our emulated CPU doesn't support all the possible features. For the
  * sake of simplicity (and probably mental sanity), wipe out a number
  * of feature bits we don't intend to support for the time being.
  * This list should get updated as new features get added to the NV
  * support, and new extension to the architecture.
  */
-static void limit_nv_id_regs(struct kvm *kvm)
+u64 limit_nv_id_reg(struct kvm *kvm, u32 reg, u64 val)
 {
-	u64 val, tmp;
-
-	/* Support everything but TME */
-	val = kvm_read_vm_id_reg(kvm, SYS_ID_AA64ISAR0_EL1);
-	val &= ~NV_FTR(ISAR0, TME);
-	kvm_set_vm_id_reg(kvm, SYS_ID_AA64ISAR0_EL1, val);
-
-	/* Support everything but Spec Invalidation and LS64 */
-	val = kvm_read_vm_id_reg(kvm, SYS_ID_AA64ISAR1_EL1);
-	val &= ~(NV_FTR(ISAR1, LS64)	|
-		 NV_FTR(ISAR1, SPECRES));
-	kvm_set_vm_id_reg(kvm, SYS_ID_AA64ISAR1_EL1, val);
-
-	/* No AMU, MPAM, S-EL2, or RAS */
-	val = kvm_read_vm_id_reg(kvm, SYS_ID_AA64PFR0_EL1);
-	val &= ~(GENMASK_ULL(55, 52)	|
-		 NV_FTR(PFR0, AMU)	|
-		 NV_FTR(PFR0, MPAM)	|
-		 NV_FTR(PFR0, SEL2)	|
-		 NV_FTR(PFR0, RAS)	|
-		 NV_FTR(PFR0, EL3)	|
-		 NV_FTR(PFR0, EL2)	|
-		 NV_FTR(PFR0, EL1));
-	/* 64bit EL1/EL2/EL3 only */
-	val |= FIELD_PREP(NV_FTR(PFR0, EL1), 0b0001);
-	val |= FIELD_PREP(NV_FTR(PFR0, EL2), 0b0001);
-	val |= FIELD_PREP(NV_FTR(PFR0, EL3), 0b0001);
-	kvm_set_vm_id_reg(kvm, SYS_ID_AA64PFR0_EL1, val);
-
-	/* Only support BTI, SSBS, CSV2_frac */
-	val = kvm_read_vm_id_reg(kvm, SYS_ID_AA64PFR1_EL1);
-	val &= (NV_FTR(PFR1, BT)	|
-		NV_FTR(PFR1, SSBS)	|
-		NV_FTR(PFR1, CSV2_frac));
-	kvm_set_vm_id_reg(kvm, SYS_ID_AA64PFR1_EL1, val);
-
-	/* Hide ECV, ExS, Secure Memory */
-	val = kvm_read_vm_id_reg(kvm, SYS_ID_AA64MMFR0_EL1);
-	val &= ~(NV_FTR(MMFR0, ECV)		|
-		 NV_FTR(MMFR0, EXS)		|
-		 NV_FTR(MMFR0, TGRAN4_2)	|
-		 NV_FTR(MMFR0, TGRAN16_2)	|
-		 NV_FTR(MMFR0, TGRAN64_2)	|
-		 NV_FTR(MMFR0, SNSMEM));
-
-	/* Disallow unsupported S2 page sizes */
-	switch (PAGE_SIZE) {
-	case SZ_64K:
-		val |= FIELD_PREP(NV_FTR(MMFR0, TGRAN16_2), 0b0001);
-		fallthrough;
-	case SZ_16K:
-		val |= FIELD_PREP(NV_FTR(MMFR0, TGRAN4_2), 0b0001);
-		fallthrough;
-	case SZ_4K:
-		/* Support everything */
+	u64 orig_val = val;
+
+	switch (reg) {
+	case SYS_ID_AA64ISAR0_EL1:
+		/* Support everything but TME */
+		val &= ~ID_AA64ISAR0_EL1_TME;
 		break;
-	}
-	/*
-	 * Since we can't support a guest S2 page size smaller than
-	 * the host's own page size (due to KVM only populating its
-	 * own S2 using the kernel's page size), advertise the
-	 * limitation using FEAT_GTG.
-	 */
-	switch (PAGE_SIZE) {
-	case SZ_4K:
-		val |= FIELD_PREP(NV_FTR(MMFR0, TGRAN4_2), 0b0010);
-		fallthrough;
-	case SZ_16K:
-		val |= FIELD_PREP(NV_FTR(MMFR0, TGRAN16_2), 0b0010);
-		fallthrough;
-	case SZ_64K:
-		val |= FIELD_PREP(NV_FTR(MMFR0, TGRAN64_2), 0b0010);
+
+	case SYS_ID_AA64ISAR1_EL1:
+		/* Support everything but LS64 and Spec Invalidation */
+		val &= ~(ID_AA64ISAR1_EL1_LS64	|
+			 ID_AA64ISAR1_EL1_SPECRES);
+		break;
+
+	case SYS_ID_AA64PFR0_EL1:
+		/* No RME, AMU, MPAM, or S-EL2 */
+		val &= ~(ID_AA64PFR0_EL1_RME	|
+			 ID_AA64PFR0_EL1_AMU	|
+			 ID_AA64PFR0_EL1_MPAM	|
+			 ID_AA64PFR0_EL1_SEL2	|
+			 ID_AA64PFR0_EL1_EL3	|
+			 ID_AA64PFR0_EL1_EL2	|
+			 ID_AA64PFR0_EL1_EL1	|
+			 ID_AA64PFR0_EL1_EL0);
+		/* 64bit only at any EL */
+		val |= SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, EL0, IMP);
+		val |= SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, EL1, IMP);
+		val |= SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, EL2, IMP);
+		val |= SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, EL3, IMP);
+		break;
+
+	case SYS_ID_AA64PFR1_EL1:
+		/* Only support BTI, SSBS, CSV2_frac */
+		val &= ~(ID_AA64PFR1_EL1_PFAR		|
+			 ID_AA64PFR1_EL1_MTEX		|
+			 ID_AA64PFR1_EL1_THE		|
+			 ID_AA64PFR1_EL1_GCS		|
+			 ID_AA64PFR1_EL1_MTE_frac	|
+			 ID_AA64PFR1_EL1_NMI		|
+			 ID_AA64PFR1_EL1_SME		|
+			 ID_AA64PFR1_EL1_RES0		|
+			 ID_AA64PFR1_EL1_MPAM_frac	|
+			 ID_AA64PFR1_EL1_MTE);
+		break;
+
+	case SYS_ID_AA64MMFR0_EL1:
+		/* Hide ExS, Secure Memory */
+		val &= ~(ID_AA64MMFR0_EL1_EXS		|
+			 ID_AA64MMFR0_EL1_TGRAN4_2	|
+			 ID_AA64MMFR0_EL1_TGRAN16_2	|
+			 ID_AA64MMFR0_EL1_TGRAN64_2	|
+			 ID_AA64MMFR0_EL1_SNSMEM);
+
+		/* Hide CNTPOFF if present */
+		val = ID_REG_LIMIT_FIELD_ENUM(val, ID_AA64MMFR0_EL1, ECV, IMP);
+
+		/* Disallow unsupported S2 page sizes */
+		switch (PAGE_SIZE) {
+		case SZ_64K:
+			val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN16_2, NI);
+			fallthrough;
+		case SZ_16K:
+			val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN4_2, NI);
+			fallthrough;
+		case SZ_4K:
+			/* Support everything */
+			break;
+		}
+
+		/*
+		 * Since we can't support a guest S2 page size smaller
+		 * than the host's own page size (due to KVM only
+		 * populating its own S2 using the kernel's page
+		 * size), advertise the limitation using FEAT_GTG.
+		 */
+		switch (PAGE_SIZE) {
+		case SZ_4K:
+			if (has_tgran_2(orig_val, 4))
+				val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN4_2, IMP);
+			fallthrough;
+		case SZ_16K:
+			if (has_tgran_2(orig_val, 16))
+				val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN16_2, IMP);
+			fallthrough;
+		case SZ_64K:
+			if (has_tgran_2(orig_val, 64))
+				val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR0_EL1, TGRAN64_2, IMP);
+			break;
+		}
+
+		/* Cap PARange to 48bits */
+		val = ID_REG_LIMIT_FIELD_ENUM(val, ID_AA64MMFR0_EL1, PARANGE, 48);
+		break;
+
+	case SYS_ID_AA64MMFR1_EL1:
+		val &= ~(ID_AA64MMFR1_EL1_CMOW		|
+			 ID_AA64MMFR1_EL1_nTLBPA	|
+			 ID_AA64MMFR1_EL1_ETS);
+
+		/* FEAT_E2H0 implies no VHE */
+		if (test_bit(KVM_ARM_VCPU_HAS_EL2_E2H0, kvm->arch.vcpu_features))
+			val &= ~ID_AA64MMFR1_EL1_VH;
+
+		val = ID_REG_LIMIT_FIELD_ENUM(val, ID_AA64MMFR1_EL1, HAFDBS, AF);
+		break;
+
+	case SYS_ID_AA64MMFR2_EL1:
+		val &= ~(ID_AA64MMFR2_EL1_BBM	|
+			 ID_AA64MMFR2_EL1_TTL	|
+			 GENMASK_ULL(47, 44)	|
+			 ID_AA64MMFR2_EL1_ST	|
+			 ID_AA64MMFR2_EL1_CCIDX	|
+			 ID_AA64MMFR2_EL1_VARange);
+
+		/* Force TTL support */
+		val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR2_EL1, TTL, IMP);
+		break;
+
+	case SYS_ID_AA64MMFR4_EL1:
+		/*
+		 * You get EITHER
+		 *
+		 * - FEAT_VHE without FEAT_E2H0
+		 * - FEAT_NV limited to FEAT_NV2
+		 * - HCR_EL2.NV1 being RES0
+		 *
+		 * OR
+		 *
+		 * - FEAT_E2H0 without FEAT_VHE nor FEAT_NV
+		 *
+		 * Life is too short for anything else.
+		 */
+		if (test_bit(KVM_ARM_VCPU_HAS_EL2_E2H0, kvm->arch.vcpu_features)) {
+			val = 0;
+		} else {
+			val = SYS_FIELD_PREP_ENUM(ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY);
+			val |= SYS_FIELD_PREP_ENUM(ID_AA64MMFR4_EL1, E2H0, NI_NV1);
+		}
+		break;
+
+	case SYS_ID_AA64DFR0_EL1:
+		/* Only limited support for PMU, Debug, BPs, WPs, and HPMN0 */
+		val &= ~(ID_AA64DFR0_EL1_ExtTrcBuff	|
+			 ID_AA64DFR0_EL1_BRBE		|
+			 ID_AA64DFR0_EL1_MTPMU		|
+			 ID_AA64DFR0_EL1_TraceBuffer	|
+			 ID_AA64DFR0_EL1_TraceFilt	|
+			 ID_AA64DFR0_EL1_PMSVer		|
+			 ID_AA64DFR0_EL1_CTX_CMPs	|
+			 ID_AA64DFR0_EL1_SEBEP		|
+			 ID_AA64DFR0_EL1_PMSS		|
+			 ID_AA64DFR0_EL1_TraceVer);
+
+		/*
+		 * FEAT_Debugv8p9 requires support for extended breakpoints /
+		 * watchpoints.
+		 */
+		val = ID_REG_LIMIT_FIELD_ENUM(val, ID_AA64DFR0_EL1, DebugVer, V8P8);
 		break;
 	}
-	/* Cap PARange to 48bits */
-	tmp = FIELD_GET(NV_FTR(MMFR0, PARANGE), val);
-	if (tmp > 0b0101) {
-		val &= ~NV_FTR(MMFR0, PARANGE);
-		val |= FIELD_PREP(NV_FTR(MMFR0, PARANGE), 0b0101);
-	}
-	kvm_set_vm_id_reg(kvm, SYS_ID_AA64MMFR0_EL1, val);
-
-	val = kvm_read_vm_id_reg(kvm, SYS_ID_AA64MMFR1_EL1);
-	val &= (NV_FTR(MMFR1, HCX)	|
-		NV_FTR(MMFR1, PAN)	|
-		NV_FTR(MMFR1, LO)	|
-		NV_FTR(MMFR1, HPDS)	|
-		NV_FTR(MMFR1, VH)	|
-		NV_FTR(MMFR1, VMIDBits));
-	kvm_set_vm_id_reg(kvm, SYS_ID_AA64MMFR1_EL1, val);
-
-	val = kvm_read_vm_id_reg(kvm, SYS_ID_AA64MMFR2_EL1);
-	val &= ~(NV_FTR(MMFR2, BBM)	|
-		 NV_FTR(MMFR2, TTL)	|
-		 GENMASK_ULL(47, 44)	|
-		 NV_FTR(MMFR2, ST)	|
-		 NV_FTR(MMFR2, CCIDX)	|
-		 NV_FTR(MMFR2, VARange));
-
-	/* Force TTL support */
-	val |= FIELD_PREP(NV_FTR(MMFR2, TTL), 0b0001);
-	kvm_set_vm_id_reg(kvm, SYS_ID_AA64MMFR2_EL1, val);
-
-	val = 0;
-	if (!cpus_have_final_cap(ARM64_HAS_HCR_NV1))
-		val |= FIELD_PREP(NV_FTR(MMFR4, E2H0),
-				  ID_AA64MMFR4_EL1_E2H0_NI_NV1);
-	kvm_set_vm_id_reg(kvm, SYS_ID_AA64MMFR4_EL1, val);
-
-	/* Only limited support for PMU, Debug, BPs, WPs, and HPMN0 */
-	val = kvm_read_vm_id_reg(kvm, SYS_ID_AA64DFR0_EL1);
-	val &= (NV_FTR(DFR0, PMUVer)	|
-		NV_FTR(DFR0, WRPs)	|
-		NV_FTR(DFR0, BRPs)	|
-		NV_FTR(DFR0, DebugVer)	|
-		NV_FTR(DFR0, HPMN0));
-
-	/* Cap Debug to ARMv8.1 */
-	tmp = FIELD_GET(NV_FTR(DFR0, DebugVer), val);
-	if (tmp > 0b0111) {
-		val &= ~NV_FTR(DFR0, DebugVer);
-		val |= FIELD_PREP(NV_FTR(DFR0, DebugVer), 0b0111);
-	}
-	kvm_set_vm_id_reg(kvm, SYS_ID_AA64DFR0_EL1, val);
+
+	return val;
 }
 
 u64 kvm_vcpu_apply_reg_masks(const struct kvm_vcpu *vcpu,
@@ -963,22 +1695,21 @@ static __always_inline void set_sysreg_masks(struct kvm *kvm, int sr, u64 res0,
 	kvm->arch.sysreg_masks->mask[i].res1 = res1;
 }
 
-int kvm_init_nv_sysregs(struct kvm *kvm)
+int kvm_init_nv_sysregs(struct kvm_vcpu *vcpu)
 {
+	struct kvm *kvm = vcpu->kvm;
 	u64 res0, res1;
 
 	lockdep_assert_held(&kvm->arch.config_lock);
 
 	if (kvm->arch.sysreg_masks)
-		return 0;
+		goto out;
 
 	kvm->arch.sysreg_masks = kzalloc(sizeof(*(kvm->arch.sysreg_masks)),
 					 GFP_KERNEL_ACCOUNT);
 	if (!kvm->arch.sysreg_masks)
 		return -ENOMEM;
 
-	limit_nv_id_regs(kvm);
-
 	/* VTTBR_EL2 */
 	res0 = res1 = 0;
 	if (!kvm_has_feat_enum(kvm, ID_AA64MMFR1_EL1, VMIDBits, 16))
@@ -998,279 +1729,98 @@ int kvm_init_nv_sysregs(struct kvm *kvm)
 	set_sysreg_masks(kvm, VMPIDR_EL2, res0, res1);
 
 	/* HCR_EL2 */
-	res0 = BIT(48);
-	res1 = HCR_RW;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, TWED, IMP))
-		res0 |= GENMASK(63, 59);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, MTE, MTE2))
-		res0 |= (HCR_TID5 | HCR_DCT | HCR_ATA);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR2_EL1, EVT, TTLBxS))
-		res0 |= (HCR_TTLBIS | HCR_TTLBOS);
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, CSV2, CSV2_2) &&
-	    !kvm_has_feat(kvm, ID_AA64PFR1_EL1, CSV2_frac, CSV2_1p2))
-		res0 |= HCR_ENSCXT;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR2_EL1, EVT, IMP))
-		res0 |= (HCR_TOCU | HCR_TICAB | HCR_TID4);
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, AMU, V1P1))
-		res0 |= HCR_AMVOFFEN;
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, V1P1))
-		res0 |= HCR_FIEN;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR2_EL1, FWB, IMP))
-		res0 |= HCR_FWB;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR2_EL1, NV, NV2))
-		res0 |= HCR_NV2;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR2_EL1, NV, IMP))
-		res0 |= (HCR_AT | HCR_NV1 | HCR_NV);
-	if (!(__vcpu_has_feature(&kvm->arch, KVM_ARM_VCPU_PTRAUTH_ADDRESS) &&
-	      __vcpu_has_feature(&kvm->arch, KVM_ARM_VCPU_PTRAUTH_GENERIC)))
-		res0 |= (HCR_API | HCR_APK);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TME, IMP))
-		res0 |= BIT(39);
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, IMP))
-		res0 |= (HCR_TEA | HCR_TERR);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, LO, IMP))
-		res0 |= HCR_TLOR;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR4_EL1, E2H0, IMP))
-		res1 |= HCR_E2H;
+	get_reg_fixed_bits(kvm, HCR_EL2, &res0, &res1);
 	set_sysreg_masks(kvm, HCR_EL2, res0, res1);
 
 	/* HCRX_EL2 */
-	res0 = HCRX_EL2_RES0;
-	res1 = HCRX_EL2_RES1;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR3_EL1, PACM, TRIVIAL_IMP))
-		res0 |= HCRX_EL2_PACMEn;
-	if (!kvm_has_feat(kvm, ID_AA64PFR2_EL1, FPMR, IMP))
-		res0 |= HCRX_EL2_EnFPM;
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, GCS, IMP))
-		res0 |= HCRX_EL2_GCSEn;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR2_EL1, SYSREG_128, IMP))
-		res0 |= HCRX_EL2_EnIDCP128;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, ADERR, DEV_ASYNC))
-		res0 |= (HCRX_EL2_EnSDERR | HCRX_EL2_EnSNERR);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, DF2, IMP))
-		res0 |= HCRX_EL2_TMEA;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, D128, IMP))
-		res0 |= HCRX_EL2_D128En;
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, THE, IMP))
-		res0 |= HCRX_EL2_PTTWI;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, SCTLRX, IMP))
-		res0 |= HCRX_EL2_SCTLR2En;
-	if (!kvm_has_tcr2(kvm))
-		res0 |= HCRX_EL2_TCR2En;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR2_EL1, MOPS, IMP))
-		res0 |= (HCRX_EL2_MSCEn | HCRX_EL2_MCE2);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, CMOW, IMP))
-		res0 |= HCRX_EL2_CMOW;
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, NMI, IMP))
-		res0 |= (HCRX_EL2_VFNMI | HCRX_EL2_VINMI | HCRX_EL2_TALLINT);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, SME, IMP) ||
-	    !(read_sysreg_s(SYS_SMIDR_EL1) & SMIDR_EL1_SMPS))
-		res0 |= HCRX_EL2_SMPME;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, XS, IMP))
-		res0 |= (HCRX_EL2_FGTnXS | HCRX_EL2_FnXS);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64_V))
-		res0 |= HCRX_EL2_EnASR;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64))
-		res0 |= HCRX_EL2_EnALS;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64_ACCDATA))
-		res0 |= HCRX_EL2_EnAS0;
+	get_reg_fixed_bits(kvm, HCRX_EL2, &res0, &res1);
 	set_sysreg_masks(kvm, HCRX_EL2, res0, res1);
 
 	/* HFG[RW]TR_EL2 */
-	res0 = res1 = 0;
-	if (!(__vcpu_has_feature(&kvm->arch, KVM_ARM_VCPU_PTRAUTH_ADDRESS) &&
-	      __vcpu_has_feature(&kvm->arch, KVM_ARM_VCPU_PTRAUTH_GENERIC)))
-		res0 |= (HFGxTR_EL2_APDAKey | HFGxTR_EL2_APDBKey |
-			 HFGxTR_EL2_APGAKey | HFGxTR_EL2_APIAKey |
-			 HFGxTR_EL2_APIBKey);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, LO, IMP))
-		res0 |= (HFGxTR_EL2_LORC_EL1 | HFGxTR_EL2_LOREA_EL1 |
-			 HFGxTR_EL2_LORID_EL1 | HFGxTR_EL2_LORN_EL1 |
-			 HFGxTR_EL2_LORSA_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, CSV2, CSV2_2) &&
-	    !kvm_has_feat(kvm, ID_AA64PFR1_EL1, CSV2_frac, CSV2_1p2))
-		res0 |= (HFGxTR_EL2_SCXTNUM_EL1 | HFGxTR_EL2_SCXTNUM_EL0);
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, GIC, IMP))
-		res0 |= HFGxTR_EL2_ICC_IGRPENn_EL1;
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, IMP))
-		res0 |= (HFGxTR_EL2_ERRIDR_EL1 | HFGxTR_EL2_ERRSELR_EL1 |
-			 HFGxTR_EL2_ERXFR_EL1 | HFGxTR_EL2_ERXCTLR_EL1 |
-			 HFGxTR_EL2_ERXSTATUS_EL1 | HFGxTR_EL2_ERXMISCn_EL1 |
-			 HFGxTR_EL2_ERXPFGF_EL1 | HFGxTR_EL2_ERXPFGCTL_EL1 |
-			 HFGxTR_EL2_ERXPFGCDN_EL1 | HFGxTR_EL2_ERXADDR_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, LS64, LS64_ACCDATA))
-		res0 |= HFGxTR_EL2_nACCDATA_EL1;
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, GCS, IMP))
-		res0 |= (HFGxTR_EL2_nGCS_EL0 | HFGxTR_EL2_nGCS_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, SME, IMP))
-		res0 |= (HFGxTR_EL2_nSMPRI_EL1 | HFGxTR_EL2_nTPIDR2_EL0);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, THE, IMP))
-		res0 |= HFGxTR_EL2_nRCWMASK_EL1;
-	if (!kvm_has_s1pie(kvm))
-		res0 |= (HFGxTR_EL2_nPIRE0_EL1 | HFGxTR_EL2_nPIR_EL1);
-	if (!kvm_has_s1poe(kvm))
-		res0 |= (HFGxTR_EL2_nPOR_EL0 | HFGxTR_EL2_nPOR_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, S2POE, IMP))
-		res0 |= HFGxTR_EL2_nS2POR_EL1;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, AIE, IMP))
-		res0 |= (HFGxTR_EL2_nMAIR2_EL1 | HFGxTR_EL2_nAMAIR2_EL1);
-	set_sysreg_masks(kvm, HFGRTR_EL2, res0 | __HFGRTR_EL2_RES0, res1);
-	set_sysreg_masks(kvm, HFGWTR_EL2, res0 | __HFGWTR_EL2_RES0, res1);
+	get_reg_fixed_bits(kvm, HFGRTR_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HFGRTR_EL2, res0, res1);
+	get_reg_fixed_bits(kvm, HFGWTR_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HFGWTR_EL2, res0, res1);
 
 	/* HDFG[RW]TR_EL2 */
-	res0 = res1 = 0;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, DoubleLock, IMP))
-		res0 |= HDFGRTR_EL2_OSDLR_EL1;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMUVer, IMP))
-		res0 |= (HDFGRTR_EL2_PMEVCNTRn_EL0 | HDFGRTR_EL2_PMEVTYPERn_EL0 |
-			 HDFGRTR_EL2_PMCCFILTR_EL0 | HDFGRTR_EL2_PMCCNTR_EL0 |
-			 HDFGRTR_EL2_PMCNTEN | HDFGRTR_EL2_PMINTEN |
-			 HDFGRTR_EL2_PMOVS | HDFGRTR_EL2_PMSELR_EL0 |
-			 HDFGRTR_EL2_PMMIR_EL1 | HDFGRTR_EL2_PMUSERENR_EL0 |
-			 HDFGRTR_EL2_PMCEIDn_EL0);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMSVer, IMP))
-		res0 |= (HDFGRTR_EL2_PMBLIMITR_EL1 | HDFGRTR_EL2_PMBPTR_EL1 |
-			 HDFGRTR_EL2_PMBSR_EL1 | HDFGRTR_EL2_PMSCR_EL1 |
-			 HDFGRTR_EL2_PMSEVFR_EL1 | HDFGRTR_EL2_PMSFCR_EL1 |
-			 HDFGRTR_EL2_PMSICR_EL1 | HDFGRTR_EL2_PMSIDR_EL1 |
-			 HDFGRTR_EL2_PMSIRR_EL1 | HDFGRTR_EL2_PMSLATFR_EL1 |
-			 HDFGRTR_EL2_PMBIDR_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceVer, IMP))
-		res0 |= (HDFGRTR_EL2_TRC | HDFGRTR_EL2_TRCAUTHSTATUS |
-			 HDFGRTR_EL2_TRCAUXCTLR | HDFGRTR_EL2_TRCCLAIM |
-			 HDFGRTR_EL2_TRCCNTVRn | HDFGRTR_EL2_TRCID |
-			 HDFGRTR_EL2_TRCIMSPECn | HDFGRTR_EL2_TRCOSLSR |
-			 HDFGRTR_EL2_TRCPRGCTLR | HDFGRTR_EL2_TRCSEQSTR |
-			 HDFGRTR_EL2_TRCSSCSRn | HDFGRTR_EL2_TRCSTATR |
-			 HDFGRTR_EL2_TRCVICTLR);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceBuffer, IMP))
-		res0 |= (HDFGRTR_EL2_TRBBASER_EL1 | HDFGRTR_EL2_TRBIDR_EL1 |
-			 HDFGRTR_EL2_TRBLIMITR_EL1 | HDFGRTR_EL2_TRBMAR_EL1 |
-			 HDFGRTR_EL2_TRBPTR_EL1 | HDFGRTR_EL2_TRBSR_EL1 |
-			 HDFGRTR_EL2_TRBTRG_EL1);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, BRBE, IMP))
-		res0 |= (HDFGRTR_EL2_nBRBIDR | HDFGRTR_EL2_nBRBCTL |
-			 HDFGRTR_EL2_nBRBDATA);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMSVer, V1P2))
-		res0 |= HDFGRTR_EL2_nPMSNEVFR_EL1;
-	set_sysreg_masks(kvm, HDFGRTR_EL2, res0 | HDFGRTR_EL2_RES0, res1);
-
-	/* Reuse the bits from the read-side and add the write-specific stuff */
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMUVer, IMP))
-		res0 |= (HDFGWTR_EL2_PMCR_EL0 | HDFGWTR_EL2_PMSWINC_EL0);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceVer, IMP))
-		res0 |= HDFGWTR_EL2_TRCOSLAR;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceFilt, IMP))
-		res0 |= HDFGWTR_EL2_TRFCR_EL1;
-	set_sysreg_masks(kvm, HFGWTR_EL2, res0 | HDFGWTR_EL2_RES0, res1);
+	get_reg_fixed_bits(kvm, HDFGRTR_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HDFGRTR_EL2, res0, res1);
+	get_reg_fixed_bits(kvm, HDFGWTR_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HDFGWTR_EL2, res0, res1);
 
 	/* HFGITR_EL2 */
-	res0 = HFGITR_EL2_RES0;
-	res1 = HFGITR_EL2_RES1;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, DPB, DPB2))
-		res0 |= HFGITR_EL2_DCCVADP;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, PAN, PAN2))
-		res0 |= (HFGITR_EL2_ATS1E1RP | HFGITR_EL2_ATS1E1WP);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TLB, OS))
-		res0 |= (HFGITR_EL2_TLBIRVAALE1OS | HFGITR_EL2_TLBIRVALE1OS |
-			 HFGITR_EL2_TLBIRVAAE1OS | HFGITR_EL2_TLBIRVAE1OS |
-			 HFGITR_EL2_TLBIVAALE1OS | HFGITR_EL2_TLBIVALE1OS |
-			 HFGITR_EL2_TLBIVAAE1OS | HFGITR_EL2_TLBIASIDE1OS |
-			 HFGITR_EL2_TLBIVAE1OS | HFGITR_EL2_TLBIVMALLE1OS);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TLB, RANGE))
-		res0 |= (HFGITR_EL2_TLBIRVAALE1 | HFGITR_EL2_TLBIRVALE1 |
-			 HFGITR_EL2_TLBIRVAAE1 | HFGITR_EL2_TLBIRVAE1 |
-			 HFGITR_EL2_TLBIRVAALE1IS | HFGITR_EL2_TLBIRVALE1IS |
-			 HFGITR_EL2_TLBIRVAAE1IS | HFGITR_EL2_TLBIRVAE1IS |
-			 HFGITR_EL2_TLBIRVAALE1OS | HFGITR_EL2_TLBIRVALE1OS |
-			 HFGITR_EL2_TLBIRVAAE1OS | HFGITR_EL2_TLBIRVAE1OS);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, SPECRES, IMP))
-		res0 |= (HFGITR_EL2_CFPRCTX | HFGITR_EL2_DVPRCTX |
-			 HFGITR_EL2_CPPRCTX);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, BRBE, IMP))
-		res0 |= (HFGITR_EL2_nBRBINJ | HFGITR_EL2_nBRBIALL);
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, GCS, IMP))
-		res0 |= (HFGITR_EL2_nGCSPUSHM_EL1 | HFGITR_EL2_nGCSSTR_EL1 |
-			 HFGITR_EL2_nGCSEPP);
-	if (!kvm_has_feat(kvm, ID_AA64ISAR1_EL1, SPECRES, COSP_RCTX))
-		res0 |= HFGITR_EL2_COSPRCTX;
-	if (!kvm_has_feat(kvm, ID_AA64ISAR2_EL1, ATS1A, IMP))
-		res0 |= HFGITR_EL2_ATS1E1A;
+	get_reg_fixed_bits(kvm, HFGITR_EL2, &res0, &res1);
 	set_sysreg_masks(kvm, HFGITR_EL2, res0, res1);
 
 	/* HAFGRTR_EL2 - not a lot to see here */
-	res0 = HAFGRTR_EL2_RES0;
-	res1 = HAFGRTR_EL2_RES1;
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, AMU, V1P1))
-		res0 |= ~(res0 | res1);
+	get_reg_fixed_bits(kvm, HAFGRTR_EL2, &res0, &res1);
 	set_sysreg_masks(kvm, HAFGRTR_EL2, res0, res1);
 
+	/* HFG[RW]TR2_EL2 */
+	get_reg_fixed_bits(kvm, HFGRTR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HFGRTR2_EL2, res0, res1);
+	get_reg_fixed_bits(kvm, HFGWTR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HFGWTR2_EL2, res0, res1);
+
+	/* HDFG[RW]TR2_EL2 */
+	get_reg_fixed_bits(kvm, HDFGRTR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HDFGRTR2_EL2, res0, res1);
+	get_reg_fixed_bits(kvm, HDFGWTR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HDFGWTR2_EL2, res0, res1);
+
+	/* HFGITR2_EL2 */
+	get_reg_fixed_bits(kvm, HFGITR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, HFGITR2_EL2, res0, res1);
+
 	/* TCR2_EL2 */
-	res0 = TCR2_EL2_RES0;
-	res1 = TCR2_EL2_RES1;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, D128, IMP))
-		res0 |= (TCR2_EL2_DisCH0 | TCR2_EL2_DisCH1 | TCR2_EL2_D128);
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, MEC, IMP))
-		res0 |= TCR2_EL2_AMEC1 | TCR2_EL2_AMEC0;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, HAFDBS, HAFT))
-		res0 |= TCR2_EL2_HAFT;
-	if (!kvm_has_feat(kvm, ID_AA64PFR1_EL1, THE, IMP))
-		res0 |= TCR2_EL2_PTTWI | TCR2_EL2_PnCH;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR3_EL1, AIE, IMP))
-		res0 |= TCR2_EL2_AIE;
-	if (!kvm_has_s1poe(kvm))
-		res0 |= TCR2_EL2_POE | TCR2_EL2_E0POE;
-	if (!kvm_has_s1pie(kvm))
-		res0 |= TCR2_EL2_PIE;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, VH, IMP))
-		res0 |= (TCR2_EL2_E0POE | TCR2_EL2_D128 |
-			 TCR2_EL2_AMEC1 | TCR2_EL2_DisCH0 | TCR2_EL2_DisCH1);
+	get_reg_fixed_bits(kvm, TCR2_EL2, &res0, &res1);
 	set_sysreg_masks(kvm, TCR2_EL2, res0, res1);
 
 	/* SCTLR_EL1 */
-	res0 = SCTLR_EL1_RES0;
-	res1 = SCTLR_EL1_RES1;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, PAN, PAN3))
-		res0 |= SCTLR_EL1_EPAN;
+	get_reg_fixed_bits(kvm, SCTLR_EL1, &res0, &res1);
 	set_sysreg_masks(kvm, SCTLR_EL1, res0, res1);
 
+	/* SCTLR2_ELx */
+	get_reg_fixed_bits(kvm, SCTLR2_EL1, &res0, &res1);
+	set_sysreg_masks(kvm, SCTLR2_EL1, res0, res1);
+	get_reg_fixed_bits(kvm, SCTLR2_EL2, &res0, &res1);
+	set_sysreg_masks(kvm, SCTLR2_EL2, res0, res1);
+
 	/* MDCR_EL2 */
-	res0 = MDCR_EL2_RES0;
-	res1 = MDCR_EL2_RES1;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMUVer, IMP))
-		res0 |= (MDCR_EL2_HPMN | MDCR_EL2_TPMCR |
-			 MDCR_EL2_TPM | MDCR_EL2_HPME);
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMSVer, IMP))
-		res0 |= MDCR_EL2_E2PB | MDCR_EL2_TPMS;
-	if (!kvm_has_feat(kvm, ID_AA64DFR1_EL1, SPMU, IMP))
-		res0 |= MDCR_EL2_EnSPM;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMUVer, V3P1))
-		res0 |= MDCR_EL2_HPMD;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceFilt, IMP))
-		res0 |= MDCR_EL2_TTRF;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMUVer, V3P5))
-		res0 |= MDCR_EL2_HCCD | MDCR_EL2_HLP;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, TraceBuffer, IMP))
-		res0 |= MDCR_EL2_E2TB;
-	if (!kvm_has_feat(kvm, ID_AA64MMFR0_EL1, FGT, IMP))
-		res0 |= MDCR_EL2_TDCC;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, MTPMU, IMP) ||
-	    kvm_has_feat(kvm, ID_AA64PFR0_EL1, EL3, IMP))
-		res0 |= MDCR_EL2_MTPME;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMUVer, V3P7))
-		res0 |= MDCR_EL2_HPMFZO;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMSS, IMP))
-		res0 |= MDCR_EL2_PMSSE;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, PMSVer, V1P2))
-		res0 |= MDCR_EL2_HPMFZS;
-	if (!kvm_has_feat(kvm, ID_AA64DFR1_EL1, EBEP, IMP))
-		res0 |= MDCR_EL2_PMEE;
-	if (!kvm_has_feat(kvm, ID_AA64DFR0_EL1, DebugVer, V8P9))
-		res0 |= MDCR_EL2_EBWE;
-	if (!kvm_has_feat(kvm, ID_AA64DFR2_EL1, STEP, IMP))
-		res0 |= MDCR_EL2_EnSTEPOP;
+	get_reg_fixed_bits(kvm, MDCR_EL2, &res0, &res1);
 	set_sysreg_masks(kvm, MDCR_EL2, res0, res1);
 
+	/* CNTHCTL_EL2 */
+	res0 = GENMASK(63, 20);
+	res1 = 0;
+	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, RME, IMP))
+		res0 |= CNTHCTL_CNTPMASK | CNTHCTL_CNTVMASK;
+	if (!kvm_has_feat(kvm, ID_AA64MMFR0_EL1, ECV, CNTPOFF)) {
+		res0 |= CNTHCTL_ECV;
+		if (!kvm_has_feat(kvm, ID_AA64MMFR0_EL1, ECV, IMP))
+			res0 |= (CNTHCTL_EL1TVT | CNTHCTL_EL1TVCT |
+				 CNTHCTL_EL1NVPCT | CNTHCTL_EL1NVVCT);
+	}
+	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, VH, IMP))
+		res0 |= GENMASK(11, 8);
+	set_sysreg_masks(kvm, CNTHCTL_EL2, res0, res1);
+
+	/* ICH_HCR_EL2 */
+	res0 = ICH_HCR_EL2_RES0;
+	res1 = ICH_HCR_EL2_RES1;
+	if (!(kvm_vgic_global_state.ich_vtr_el2 & ICH_VTR_EL2_TDS))
+		res0 |= ICH_HCR_EL2_TDIR;
+	/* No GICv4 is presented to the guest */
+	res0 |= ICH_HCR_EL2_DVIM | ICH_HCR_EL2_vSGIEOICount;
+	set_sysreg_masks(kvm, ICH_HCR_EL2, res0, res1);
+
+	/* VNCR_EL2 */
+	set_sysreg_masks(kvm, VNCR_EL2, VNCR_EL2_RES0, VNCR_EL2_RES1);
+
+out:
+	for (enum vcpu_sysreg sr = __SANITISED_REG_START__; sr < NR_SYS_REGS; sr++)
+		__vcpu_rmw_sys_reg(vcpu, sr, |=, 0);
+
 	return 0;
 }
 
@@ -1286,4 +1836,84 @@ void check_nested_vcpu_requests(struct kvm_vcpu *vcpu)
 		}
 		write_unlock(&vcpu->kvm->mmu_lock);
 	}
+
+	if (kvm_check_request(KVM_REQ_MAP_L1_VNCR_EL2, vcpu))
+		kvm_map_l1_vncr(vcpu);
+
+	/* Must be last, as may switch context! */
+	if (kvm_check_request(KVM_REQ_GUEST_HYP_IRQ_PENDING, vcpu))
+		kvm_inject_nested_irq(vcpu);
+}
+
+/*
+ * One of the many architectural bugs in FEAT_NV2 is that the guest hypervisor
+ * can write to HCR_EL2 behind our back, potentially changing the exception
+ * routing / masking for even the host context.
+ *
+ * What follows is some slop to (1) react to exception routing / masking and (2)
+ * preserve the pending SError state across translation regimes.
+ */
+void kvm_nested_flush_hwstate(struct kvm_vcpu *vcpu)
+{
+	if (!vcpu_has_nv(vcpu))
+		return;
+
+	if (unlikely(vcpu_test_and_clear_flag(vcpu, NESTED_SERROR_PENDING)))
+		kvm_inject_serror_esr(vcpu, vcpu_get_vsesr(vcpu));
+}
+
+void kvm_nested_sync_hwstate(struct kvm_vcpu *vcpu)
+{
+	unsigned long *hcr = vcpu_hcr(vcpu);
+
+	if (!vcpu_has_nv(vcpu))
+		return;
+
+	/*
+	 * We previously decided that an SError was deliverable to the guest.
+	 * Reap the pending state from HCR_EL2 and...
+	 */
+	if (unlikely(__test_and_clear_bit(__ffs(HCR_VSE), hcr)))
+		vcpu_set_flag(vcpu, NESTED_SERROR_PENDING);
+
+	/*
+	 * Re-attempt SError injection in case the deliverability has changed,
+	 * which is necessary to faithfully emulate WFI the case of a pending
+	 * SError being a wakeup condition.
+	 */
+	if (unlikely(vcpu_test_and_clear_flag(vcpu, NESTED_SERROR_PENDING)))
+		kvm_inject_serror_esr(vcpu, vcpu_get_vsesr(vcpu));
+}
+
+/*
+ * KVM unconditionally sets most of these traps anyway but use an allowlist
+ * to document the guest hypervisor traps that may take precedence and guard
+ * against future changes to the non-nested trap configuration.
+ */
+#define NV_MDCR_GUEST_INCLUDE	(MDCR_EL2_TDE	|	\
+				 MDCR_EL2_TDA	|	\
+				 MDCR_EL2_TDRA	|	\
+				 MDCR_EL2_TTRF	|	\
+				 MDCR_EL2_TPMS	|	\
+				 MDCR_EL2_TPM	|	\
+				 MDCR_EL2_TPMCR	|	\
+				 MDCR_EL2_TDCC	|	\
+				 MDCR_EL2_TDOSA)
+
+void kvm_nested_setup_mdcr_el2(struct kvm_vcpu *vcpu)
+{
+	u64 guest_mdcr = __vcpu_sys_reg(vcpu, MDCR_EL2);
+
+	if (is_nested_ctxt(vcpu))
+		vcpu->arch.mdcr_el2 |= (guest_mdcr & NV_MDCR_GUEST_INCLUDE);
+	/*
+	 * In yet another example where FEAT_NV2 is fscking broken, accesses
+	 * to MDSCR_EL1 are redirected to the VNCR despite having an effect
+	 * at EL2. Use a big hammer to apply sanity.
+	 *
+	 * Unless of course we have FEAT_FGT, in which case we can precisely
+	 * trap MDSCR_EL1.
+	 */
+	else if (!cpus_have_final_cap(ARM64_HAS_FGT))
+		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
 }
diff --git a/arch/arm64/kvm/pkvm.c b/arch/arm64/kvm/pkvm.c
index 85117ea8f351..d7a0f69a9982 100644
--- a/arch/arm64/kvm/pkvm.c
+++ b/arch/arm64/kvm/pkvm.c
@@ -5,11 +5,12 @@
  */
 
 #include <linux/init.h>
+#include <linux/interval_tree_generic.h>
 #include <linux/kmemleak.h>
 #include <linux/kvm_host.h>
+#include <asm/kvm_mmu.h>
 #include <linux/memblock.h>
 #include <linux/mutex.h>
-#include <linux/sort.h>
 
 #include <asm/kvm_pkvm.h>
 
@@ -23,23 +24,6 @@ static unsigned int *hyp_memblock_nr_ptr = &kvm_nvhe_sym(hyp_memblock_nr);
 phys_addr_t hyp_mem_base;
 phys_addr_t hyp_mem_size;
 
-static int cmp_hyp_memblock(const void *p1, const void *p2)
-{
-	const struct memblock_region *r1 = p1;
-	const struct memblock_region *r2 = p2;
-
-	return r1->base < r2->base ? -1 : (r1->base > r2->base);
-}
-
-static void __init sort_memblock_regions(void)
-{
-	sort(hyp_memory,
-	     *hyp_memblock_nr_ptr,
-	     sizeof(struct memblock_region),
-	     cmp_hyp_memblock,
-	     NULL);
-}
-
 static int __init register_memblock_regions(void)
 {
 	struct memblock_region *reg;
@@ -51,7 +35,6 @@ static int __init register_memblock_regions(void)
 		hyp_memory[*hyp_memblock_nr_ptr] = *reg;
 		(*hyp_memblock_nr_ptr)++;
 	}
-	sort_memblock_regions();
 
 	return 0;
 }
@@ -78,6 +61,7 @@ void __init kvm_hyp_reserve(void)
 	hyp_mem_pages += host_s2_pgtable_pages();
 	hyp_mem_pages += hyp_vm_table_pages();
 	hyp_mem_pages += hyp_vmemmap_pages(STRUCT_HYP_PAGE_SIZE);
+	hyp_mem_pages += pkvm_selftest_pages();
 	hyp_mem_pages += hyp_ffa_proxy_pages();
 
 	/*
@@ -101,15 +85,45 @@ void __init kvm_hyp_reserve(void)
 		 hyp_mem_base);
 }
 
-static void __pkvm_destroy_hyp_vm(struct kvm *host_kvm)
+static void __pkvm_destroy_hyp_vm(struct kvm *kvm)
 {
-	if (host_kvm->arch.pkvm.handle) {
+	if (pkvm_hyp_vm_is_created(kvm)) {
 		WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
-					  host_kvm->arch.pkvm.handle));
+					  kvm->arch.pkvm.handle));
+	} else if (kvm->arch.pkvm.handle) {
+		/*
+		 * The VM could have been reserved but hyp initialization has
+		 * failed. Make sure to unreserve it.
+		 */
+		kvm_call_hyp_nvhe(__pkvm_unreserve_vm, kvm->arch.pkvm.handle);
 	}
 
-	host_kvm->arch.pkvm.handle = 0;
-	free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
+	kvm->arch.pkvm.handle = 0;
+	kvm->arch.pkvm.is_created = false;
+	free_hyp_memcache(&kvm->arch.pkvm.teardown_mc);
+	free_hyp_memcache(&kvm->arch.pkvm.stage2_teardown_mc);
+}
+
+static int __pkvm_create_hyp_vcpu(struct kvm_vcpu *vcpu)
+{
+	size_t hyp_vcpu_sz = PAGE_ALIGN(PKVM_HYP_VCPU_SIZE);
+	pkvm_handle_t handle = vcpu->kvm->arch.pkvm.handle;
+	void *hyp_vcpu;
+	int ret;
+
+	vcpu->arch.pkvm_memcache.flags |= HYP_MEMCACHE_ACCOUNT_STAGE2;
+
+	hyp_vcpu = alloc_pages_exact(hyp_vcpu_sz, GFP_KERNEL_ACCOUNT);
+	if (!hyp_vcpu)
+		return -ENOMEM;
+
+	ret = kvm_call_hyp_nvhe(__pkvm_init_vcpu, handle, vcpu, hyp_vcpu);
+	if (!ret)
+		vcpu_set_flag(vcpu, VCPU_PKVM_FINALIZED);
+	else
+		free_pages_exact(hyp_vcpu, hyp_vcpu_sz);
+
+	return ret;
 }
 
 /*
@@ -122,19 +136,16 @@ static void __pkvm_destroy_hyp_vm(struct kvm *host_kvm)
  *
  * Return 0 on success, negative error code on failure.
  */
-static int __pkvm_create_hyp_vm(struct kvm *host_kvm)
+static int __pkvm_create_hyp_vm(struct kvm *kvm)
 {
-	size_t pgd_sz, hyp_vm_sz, hyp_vcpu_sz;
-	struct kvm_vcpu *host_vcpu;
-	pkvm_handle_t handle;
+	size_t pgd_sz, hyp_vm_sz;
 	void *pgd, *hyp_vm;
-	unsigned long idx;
 	int ret;
 
-	if (host_kvm->created_vcpus < 1)
+	if (kvm->created_vcpus < 1)
 		return -EINVAL;
 
-	pgd_sz = kvm_pgtable_stage2_pgd_size(host_kvm->arch.mmu.vtcr);
+	pgd_sz = kvm_pgtable_stage2_pgd_size(kvm->arch.mmu.vtcr);
 
 	/*
 	 * The PGD pages will be reclaimed using a hyp_memcache which implies
@@ -148,7 +159,7 @@ static int __pkvm_create_hyp_vm(struct kvm *host_kvm)
 	/* Allocate memory to donate to hyp for vm and vcpu pointers. */
 	hyp_vm_sz = PAGE_ALIGN(size_add(PKVM_HYP_VM_SIZE,
 					size_mul(sizeof(void *),
-						 host_kvm->created_vcpus)));
+						 kvm->created_vcpus)));
 	hyp_vm = alloc_pages_exact(hyp_vm_sz, GFP_KERNEL_ACCOUNT);
 	if (!hyp_vm) {
 		ret = -ENOMEM;
@@ -156,44 +167,15 @@ static int __pkvm_create_hyp_vm(struct kvm *host_kvm)
 	}
 
 	/* Donate the VM memory to hyp and let hyp initialize it. */
-	ret = kvm_call_hyp_nvhe(__pkvm_init_vm, host_kvm, hyp_vm, pgd);
-	if (ret < 0)
+	ret = kvm_call_hyp_nvhe(__pkvm_init_vm, kvm, hyp_vm, pgd);
+	if (ret)
 		goto free_vm;
 
-	handle = ret;
-
-	host_kvm->arch.pkvm.handle = handle;
-
-	/* Donate memory for the vcpus at hyp and initialize it. */
-	hyp_vcpu_sz = PAGE_ALIGN(PKVM_HYP_VCPU_SIZE);
-	kvm_for_each_vcpu(idx, host_vcpu, host_kvm) {
-		void *hyp_vcpu;
-
-		/* Indexing of the vcpus to be sequential starting at 0. */
-		if (WARN_ON(host_vcpu->vcpu_idx != idx)) {
-			ret = -EINVAL;
-			goto destroy_vm;
-		}
-
-		hyp_vcpu = alloc_pages_exact(hyp_vcpu_sz, GFP_KERNEL_ACCOUNT);
-		if (!hyp_vcpu) {
-			ret = -ENOMEM;
-			goto destroy_vm;
-		}
-
-		ret = kvm_call_hyp_nvhe(__pkvm_init_vcpu, handle, host_vcpu,
-					hyp_vcpu);
-		if (ret) {
-			free_pages_exact(hyp_vcpu, hyp_vcpu_sz);
-			goto destroy_vm;
-		}
-	}
+	kvm->arch.pkvm.is_created = true;
+	kvm->arch.pkvm.stage2_teardown_mc.flags |= HYP_MEMCACHE_ACCOUNT_STAGE2;
+	kvm_account_pgtable_pages(pgd, pgd_sz / PAGE_SIZE);
 
 	return 0;
-
-destroy_vm:
-	__pkvm_destroy_hyp_vm(host_kvm);
-	return ret;
 free_vm:
 	free_pages_exact(hyp_vm, hyp_vm_sz);
 free_pgd:
@@ -201,27 +183,60 @@ free_pgd:
 	return ret;
 }
 
-int pkvm_create_hyp_vm(struct kvm *host_kvm)
+bool pkvm_hyp_vm_is_created(struct kvm *kvm)
+{
+	return READ_ONCE(kvm->arch.pkvm.is_created);
+}
+
+int pkvm_create_hyp_vm(struct kvm *kvm)
 {
 	int ret = 0;
 
-	mutex_lock(&host_kvm->arch.config_lock);
-	if (!host_kvm->arch.pkvm.handle)
-		ret = __pkvm_create_hyp_vm(host_kvm);
-	mutex_unlock(&host_kvm->arch.config_lock);
+	mutex_lock(&kvm->arch.config_lock);
+	if (!pkvm_hyp_vm_is_created(kvm))
+		ret = __pkvm_create_hyp_vm(kvm);
+	mutex_unlock(&kvm->arch.config_lock);
 
 	return ret;
 }
 
-void pkvm_destroy_hyp_vm(struct kvm *host_kvm)
+int pkvm_create_hyp_vcpu(struct kvm_vcpu *vcpu)
 {
-	mutex_lock(&host_kvm->arch.config_lock);
-	__pkvm_destroy_hyp_vm(host_kvm);
-	mutex_unlock(&host_kvm->arch.config_lock);
+	int ret = 0;
+
+	mutex_lock(&vcpu->kvm->arch.config_lock);
+	if (!vcpu_get_flag(vcpu, VCPU_PKVM_FINALIZED))
+		ret = __pkvm_create_hyp_vcpu(vcpu);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
+
+	return ret;
 }
 
-int pkvm_init_host_vm(struct kvm *host_kvm)
+void pkvm_destroy_hyp_vm(struct kvm *kvm)
 {
+	mutex_lock(&kvm->arch.config_lock);
+	__pkvm_destroy_hyp_vm(kvm);
+	mutex_unlock(&kvm->arch.config_lock);
+}
+
+int pkvm_init_host_vm(struct kvm *kvm)
+{
+	int ret;
+
+	if (pkvm_hyp_vm_is_created(kvm))
+		return -EINVAL;
+
+	/* VM is already reserved, no need to proceed. */
+	if (kvm->arch.pkvm.handle)
+		return 0;
+
+	/* Reserve the VM in hyp and obtain a hyp handle for the VM. */
+	ret = kvm_call_hyp_nvhe(__pkvm_reserve_vm);
+	if (ret < 0)
+		return ret;
+
+	kvm->arch.pkvm.handle = ret;
+
 	return 0;
 }
 
@@ -258,6 +273,7 @@ static int __init finalize_pkvm(void)
 	 * at, which would end badly once inaccessible.
 	 */
 	kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start);
+	kmemleak_free_part(__hyp_data_start, __hyp_data_end - __hyp_data_start);
 	kmemleak_free_part(__hyp_rodata_start, __hyp_rodata_end - __hyp_rodata_start);
 	kmemleak_free_part_phys(hyp_mem_base, hyp_mem_size);
 
@@ -268,3 +284,204 @@ static int __init finalize_pkvm(void)
 	return ret;
 }
 device_initcall_sync(finalize_pkvm);
+
+static u64 __pkvm_mapping_start(struct pkvm_mapping *m)
+{
+	return m->gfn * PAGE_SIZE;
+}
+
+static u64 __pkvm_mapping_end(struct pkvm_mapping *m)
+{
+	return (m->gfn + m->nr_pages) * PAGE_SIZE - 1;
+}
+
+INTERVAL_TREE_DEFINE(struct pkvm_mapping, node, u64, __subtree_last,
+		     __pkvm_mapping_start, __pkvm_mapping_end, static,
+		     pkvm_mapping);
+
+/*
+ * __tmp is updated to iter_first(pkvm_mappings) *before* entering the body of the loop to allow
+ * freeing of __map inline.
+ */
+#define for_each_mapping_in_range_safe(__pgt, __start, __end, __map)				\
+	for (struct pkvm_mapping *__tmp = pkvm_mapping_iter_first(&(__pgt)->pkvm_mappings,	\
+								  __start, __end - 1);		\
+	     __tmp && ({									\
+				__map = __tmp;							\
+				__tmp = pkvm_mapping_iter_next(__map, __start, __end - 1);	\
+				true;								\
+		       });									\
+	    )
+
+int pkvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
+			     struct kvm_pgtable_mm_ops *mm_ops)
+{
+	pgt->pkvm_mappings	= RB_ROOT_CACHED;
+	pgt->mmu		= mmu;
+
+	return 0;
+}
+
+static int __pkvm_pgtable_stage2_unmap(struct kvm_pgtable *pgt, u64 start, u64 end)
+{
+	struct kvm *kvm = kvm_s2_mmu_to_kvm(pgt->mmu);
+	pkvm_handle_t handle = kvm->arch.pkvm.handle;
+	struct pkvm_mapping *mapping;
+	int ret;
+
+	if (!handle)
+		return 0;
+
+	for_each_mapping_in_range_safe(pgt, start, end, mapping) {
+		ret = kvm_call_hyp_nvhe(__pkvm_host_unshare_guest, handle, mapping->gfn,
+					mapping->nr_pages);
+		if (WARN_ON(ret))
+			return ret;
+		pkvm_mapping_remove(mapping, &pgt->pkvm_mappings);
+		kfree(mapping);
+	}
+
+	return 0;
+}
+
+void pkvm_pgtable_stage2_destroy_range(struct kvm_pgtable *pgt,
+					u64 addr, u64 size)
+{
+	__pkvm_pgtable_stage2_unmap(pgt, addr, addr + size);
+}
+
+void pkvm_pgtable_stage2_destroy_pgd(struct kvm_pgtable *pgt)
+{
+	/* Expected to be called after all pKVM mappings have been released. */
+	WARN_ON_ONCE(!RB_EMPTY_ROOT(&pgt->pkvm_mappings.rb_root));
+}
+
+int pkvm_pgtable_stage2_map(struct kvm_pgtable *pgt, u64 addr, u64 size,
+			   u64 phys, enum kvm_pgtable_prot prot,
+			   void *mc, enum kvm_pgtable_walk_flags flags)
+{
+	struct kvm *kvm = kvm_s2_mmu_to_kvm(pgt->mmu);
+	struct pkvm_mapping *mapping = NULL;
+	struct kvm_hyp_memcache *cache = mc;
+	u64 gfn = addr >> PAGE_SHIFT;
+	u64 pfn = phys >> PAGE_SHIFT;
+	int ret;
+
+	if (size != PAGE_SIZE && size != PMD_SIZE)
+		return -EINVAL;
+
+	lockdep_assert_held_write(&kvm->mmu_lock);
+
+	/*
+	 * Calling stage2_map() on top of existing mappings is either happening because of a race
+	 * with another vCPU, or because we're changing between page and block mappings. As per
+	 * user_mem_abort(), same-size permission faults are handled in the relax_perms() path.
+	 */
+	mapping = pkvm_mapping_iter_first(&pgt->pkvm_mappings, addr, addr + size - 1);
+	if (mapping) {
+		if (size == (mapping->nr_pages * PAGE_SIZE))
+			return -EAGAIN;
+
+		/* Remove _any_ pkvm_mapping overlapping with the range, bigger or smaller. */
+		ret = __pkvm_pgtable_stage2_unmap(pgt, addr, addr + size);
+		if (ret)
+			return ret;
+		mapping = NULL;
+	}
+
+	ret = kvm_call_hyp_nvhe(__pkvm_host_share_guest, pfn, gfn, size / PAGE_SIZE, prot);
+	if (WARN_ON(ret))
+		return ret;
+
+	swap(mapping, cache->mapping);
+	mapping->gfn = gfn;
+	mapping->pfn = pfn;
+	mapping->nr_pages = size / PAGE_SIZE;
+	pkvm_mapping_insert(mapping, &pgt->pkvm_mappings);
+
+	return ret;
+}
+
+int pkvm_pgtable_stage2_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size)
+{
+	lockdep_assert_held_write(&kvm_s2_mmu_to_kvm(pgt->mmu)->mmu_lock);
+
+	return __pkvm_pgtable_stage2_unmap(pgt, addr, addr + size);
+}
+
+int pkvm_pgtable_stage2_wrprotect(struct kvm_pgtable *pgt, u64 addr, u64 size)
+{
+	struct kvm *kvm = kvm_s2_mmu_to_kvm(pgt->mmu);
+	pkvm_handle_t handle = kvm->arch.pkvm.handle;
+	struct pkvm_mapping *mapping;
+	int ret = 0;
+
+	lockdep_assert_held(&kvm->mmu_lock);
+	for_each_mapping_in_range_safe(pgt, addr, addr + size, mapping) {
+		ret = kvm_call_hyp_nvhe(__pkvm_host_wrprotect_guest, handle, mapping->gfn,
+					mapping->nr_pages);
+		if (WARN_ON(ret))
+			break;
+	}
+
+	return ret;
+}
+
+int pkvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size)
+{
+	struct kvm *kvm = kvm_s2_mmu_to_kvm(pgt->mmu);
+	struct pkvm_mapping *mapping;
+
+	lockdep_assert_held(&kvm->mmu_lock);
+	for_each_mapping_in_range_safe(pgt, addr, addr + size, mapping)
+		__clean_dcache_guest_page(pfn_to_kaddr(mapping->pfn),
+					  PAGE_SIZE * mapping->nr_pages);
+
+	return 0;
+}
+
+bool pkvm_pgtable_stage2_test_clear_young(struct kvm_pgtable *pgt, u64 addr, u64 size, bool mkold)
+{
+	struct kvm *kvm = kvm_s2_mmu_to_kvm(pgt->mmu);
+	pkvm_handle_t handle = kvm->arch.pkvm.handle;
+	struct pkvm_mapping *mapping;
+	bool young = false;
+
+	lockdep_assert_held(&kvm->mmu_lock);
+	for_each_mapping_in_range_safe(pgt, addr, addr + size, mapping)
+		young |= kvm_call_hyp_nvhe(__pkvm_host_test_clear_young_guest, handle, mapping->gfn,
+					   mapping->nr_pages, mkold);
+
+	return young;
+}
+
+int pkvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr, enum kvm_pgtable_prot prot,
+				    enum kvm_pgtable_walk_flags flags)
+{
+	return kvm_call_hyp_nvhe(__pkvm_host_relax_perms_guest, addr >> PAGE_SHIFT, prot);
+}
+
+void pkvm_pgtable_stage2_mkyoung(struct kvm_pgtable *pgt, u64 addr,
+				 enum kvm_pgtable_walk_flags flags)
+{
+	WARN_ON(kvm_call_hyp_nvhe(__pkvm_host_mkyoung_guest, addr >> PAGE_SHIFT));
+}
+
+void pkvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level)
+{
+	WARN_ON_ONCE(1);
+}
+
+kvm_pte_t *pkvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt, u64 phys, s8 level,
+					enum kvm_pgtable_prot prot, void *mc, bool force_pte)
+{
+	WARN_ON_ONCE(1);
+	return NULL;
+}
+
+int pkvm_pgtable_stage2_split(struct kvm_pgtable *pgt, u64 addr, u64 size,
+			      struct kvm_mmu_memory_cache *mc)
+{
+	WARN_ON_ONCE(1);
+	return -EINVAL;
+}
diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
index 456102bc0b55..b03dbda7f1ab 100644
--- a/arch/arm64/kvm/pmu-emul.c
+++ b/arch/arm64/kvm/pmu-emul.c
@@ -17,13 +17,18 @@
 
 #define PERF_ATTR_CFG1_COUNTER_64BIT	BIT(0)
 
-DEFINE_STATIC_KEY_FALSE(kvm_arm_pmu_available);
-
 static LIST_HEAD(arm_pmus);
 static DEFINE_MUTEX(arm_pmus_lock);
 
 static void kvm_pmu_create_perf_event(struct kvm_pmc *pmc);
 static void kvm_pmu_release_perf_event(struct kvm_pmc *pmc);
+static bool kvm_pmu_counter_is_enabled(struct kvm_pmc *pmc);
+
+bool kvm_supports_guest_pmuv3(void)
+{
+	guard(mutex)(&arm_pmus_lock);
+	return !list_empty(&arm_pmus);
+}
 
 static struct kvm_vcpu *kvm_pmc_to_vcpu(const struct kvm_pmc *pmc)
 {
@@ -149,9 +154,6 @@ static u64 kvm_pmu_get_pmc_value(struct kvm_pmc *pmc)
  */
 u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx)
 {
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return 0;
-
 	return kvm_pmu_get_pmc_value(kvm_vcpu_idx_to_pmc(vcpu, select_idx));
 }
 
@@ -176,7 +178,7 @@ static void kvm_pmu_set_pmc_value(struct kvm_pmc *pmc, u64 val, bool force)
 		val |= lower_32_bits(val);
 	}
 
-	__vcpu_sys_reg(vcpu, reg) = val;
+	__vcpu_assign_sys_reg(vcpu, reg, val);
 
 	/* Recreate the perf event to reflect the updated sample_period */
 	kvm_pmu_create_perf_event(pmc);
@@ -190,13 +192,23 @@ static void kvm_pmu_set_pmc_value(struct kvm_pmc *pmc, u64 val, bool force)
  */
 void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu, u64 select_idx, u64 val)
 {
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return;
-
 	kvm_pmu_set_pmc_value(kvm_vcpu_idx_to_pmc(vcpu, select_idx), val, false);
 }
 
 /**
+ * kvm_pmu_set_counter_value_user - set PMU counter value from user
+ * @vcpu: The vcpu pointer
+ * @select_idx: The counter index
+ * @val: The counter value
+ */
+void kvm_pmu_set_counter_value_user(struct kvm_vcpu *vcpu, u64 select_idx, u64 val)
+{
+	kvm_pmu_release_perf_event(kvm_vcpu_idx_to_pmc(vcpu, select_idx));
+	__vcpu_assign_sys_reg(vcpu, counter_index_to_reg(select_idx), val);
+	kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
+}
+
+/**
  * kvm_pmu_release_perf_event - remove the perf event
  * @pmc: The PMU counter pointer
  */
@@ -227,7 +239,7 @@ static void kvm_pmu_stop_counter(struct kvm_pmc *pmc)
 
 	reg = counter_index_to_reg(pmc->idx);
 
-	__vcpu_sys_reg(vcpu, reg) = val;
+	__vcpu_assign_sys_reg(vcpu, reg, val);
 
 	kvm_pmu_release_perf_event(pmc);
 }
@@ -247,20 +259,6 @@ void kvm_pmu_vcpu_init(struct kvm_vcpu *vcpu)
 }
 
 /**
- * kvm_pmu_vcpu_reset - reset pmu state for cpu
- * @vcpu: The vcpu pointer
- *
- */
-void kvm_pmu_vcpu_reset(struct kvm_vcpu *vcpu)
-{
-	unsigned long mask = kvm_pmu_implemented_counter_mask(vcpu);
-	int i;
-
-	for_each_set_bit(i, &mask, 32)
-		kvm_pmu_stop_counter(kvm_vcpu_idx_to_pmc(vcpu, i));
-}
-
-/**
  * kvm_pmu_vcpu_destroy - free perf event of PMU for cpu
  * @vcpu: The vcpu pointer
  *
@@ -282,7 +280,7 @@ static u64 kvm_pmu_hyp_counter_mask(struct kvm_vcpu *vcpu)
 		return 0;
 
 	hpmn = SYS_FIELD_GET(MDCR_EL2, HPMN, __vcpu_sys_reg(vcpu, MDCR_EL2));
-	n = vcpu->kvm->arch.pmcr_n;
+	n = vcpu->kvm->arch.nr_pmu_counters;
 
 	/*
 	 * Programming HPMN to a value greater than PMCR_EL0.N is
@@ -327,65 +325,44 @@ u64 kvm_pmu_implemented_counter_mask(struct kvm_vcpu *vcpu)
 		return GENMASK(val - 1, 0) | BIT(ARMV8_PMU_CYCLE_IDX);
 }
 
-/**
- * kvm_pmu_enable_counter_mask - enable selected PMU counters
- * @vcpu: The vcpu pointer
- * @val: the value guest writes to PMCNTENSET register
- *
- * Call perf_event_enable to start counting the perf event
- */
-void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
+static void kvm_pmc_enable_perf_event(struct kvm_pmc *pmc)
 {
-	int i;
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return;
-
-	if (!(kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E) || !val)
+	if (!pmc->perf_event) {
+		kvm_pmu_create_perf_event(pmc);
 		return;
+	}
 
-	for (i = 0; i < KVM_ARMV8_PMU_MAX_COUNTERS; i++) {
-		struct kvm_pmc *pmc;
-
-		if (!(val & BIT(i)))
-			continue;
-
-		pmc = kvm_vcpu_idx_to_pmc(vcpu, i);
+	perf_event_enable(pmc->perf_event);
+	if (pmc->perf_event->state != PERF_EVENT_STATE_ACTIVE)
+		kvm_debug("fail to enable perf event\n");
+}
 
-		if (!pmc->perf_event) {
-			kvm_pmu_create_perf_event(pmc);
-		} else {
-			perf_event_enable(pmc->perf_event);
-			if (pmc->perf_event->state != PERF_EVENT_STATE_ACTIVE)
-				kvm_debug("fail to enable perf event\n");
-		}
-	}
+static void kvm_pmc_disable_perf_event(struct kvm_pmc *pmc)
+{
+	if (pmc->perf_event)
+		perf_event_disable(pmc->perf_event);
 }
 
-/**
- * kvm_pmu_disable_counter_mask - disable selected PMU counters
- * @vcpu: The vcpu pointer
- * @val: the value guest writes to PMCNTENCLR register
- *
- * Call perf_event_disable to stop counting the perf event
- */
-void kvm_pmu_disable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
+void kvm_pmu_reprogram_counter_mask(struct kvm_vcpu *vcpu, u64 val)
 {
 	int i;
 
-	if (!kvm_vcpu_has_pmu(vcpu) || !val)
+	if (!val)
 		return;
 
 	for (i = 0; i < KVM_ARMV8_PMU_MAX_COUNTERS; i++) {
-		struct kvm_pmc *pmc;
+		struct kvm_pmc *pmc = kvm_vcpu_idx_to_pmc(vcpu, i);
 
 		if (!(val & BIT(i)))
 			continue;
 
-		pmc = kvm_vcpu_idx_to_pmc(vcpu, i);
-
-		if (pmc->perf_event)
-			perf_event_disable(pmc->perf_event);
+		if (kvm_pmu_counter_is_enabled(pmc))
+			kvm_pmc_enable_perf_event(pmc);
+		else
+			kvm_pmc_disable_perf_event(pmc);
 	}
+
+	kvm_vcpu_pmu_restore_guest(vcpu);
 }
 
 /*
@@ -421,9 +398,6 @@ static void kvm_pmu_update_state(struct kvm_vcpu *vcpu)
 	struct kvm_pmu *pmu = &vcpu->arch.pmu;
 	bool overflow;
 
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return;
-
 	overflow = kvm_pmu_overflow_status(vcpu);
 	if (pmu->irq_level == overflow)
 		return;
@@ -529,14 +503,14 @@ static void kvm_pmu_counter_increment(struct kvm_vcpu *vcpu,
 		reg = __vcpu_sys_reg(vcpu, counter_index_to_reg(i)) + 1;
 		if (!kvm_pmc_is_64bit(pmc))
 			reg = lower_32_bits(reg);
-		__vcpu_sys_reg(vcpu, counter_index_to_reg(i)) = reg;
+		__vcpu_assign_sys_reg(vcpu, counter_index_to_reg(i), reg);
 
 		/* No overflow? move on */
 		if (kvm_pmc_has_64bit_overflow(pmc) ? reg : lower_32_bits(reg))
 			continue;
 
 		/* Mark overflow */
-		__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(i);
+		__vcpu_rmw_sys_reg(vcpu, PMOVSSET_EL0, |=, BIT(i));
 
 		if (kvm_pmu_counter_can_chain(pmc))
 			kvm_pmu_counter_increment(vcpu, BIT(i + 1),
@@ -582,7 +556,7 @@ static void kvm_pmu_perf_overflow(struct perf_event *perf_event,
 	perf_event->attr.sample_period = period;
 	perf_event->hw.sample_period = period;
 
-	__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(idx);
+	__vcpu_rmw_sys_reg(vcpu, PMOVSSET_EL0, |=, BIT(idx));
 
 	if (kvm_pmu_counter_can_chain(pmc))
 		kvm_pmu_counter_increment(vcpu, BIT(idx + 1),
@@ -619,34 +593,30 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
 {
 	int i;
 
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return;
-
 	/* Fixup PMCR_EL0 to reconcile the PMU version and the LP bit */
 	if (!kvm_has_feat(vcpu->kvm, ID_AA64DFR0_EL1, PMUVer, V3P5))
 		val &= ~ARMV8_PMU_PMCR_LP;
 
-	/* The reset bits don't indicate any state, and shouldn't be saved. */
-	__vcpu_sys_reg(vcpu, PMCR_EL0) = val & ~(ARMV8_PMU_PMCR_C | ARMV8_PMU_PMCR_P);
+	/* Request a reload of the PMU to enable/disable affected counters */
+	if ((__vcpu_sys_reg(vcpu, PMCR_EL0) ^ val) & ARMV8_PMU_PMCR_E)
+		kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
 
-	if (val & ARMV8_PMU_PMCR_E) {
-		kvm_pmu_enable_counter_mask(vcpu,
-		       __vcpu_sys_reg(vcpu, PMCNTENSET_EL0));
-	} else {
-		kvm_pmu_disable_counter_mask(vcpu,
-		       __vcpu_sys_reg(vcpu, PMCNTENSET_EL0));
-	}
+	/* The reset bits don't indicate any state, and shouldn't be saved. */
+	__vcpu_assign_sys_reg(vcpu, PMCR_EL0, (val & ~(ARMV8_PMU_PMCR_C | ARMV8_PMU_PMCR_P)));
 
 	if (val & ARMV8_PMU_PMCR_C)
 		kvm_pmu_set_counter_value(vcpu, ARMV8_PMU_CYCLE_IDX, 0);
 
 	if (val & ARMV8_PMU_PMCR_P) {
-		unsigned long mask = kvm_pmu_accessible_counter_mask(vcpu);
-		mask &= ~BIT(ARMV8_PMU_CYCLE_IDX);
+		unsigned long mask = kvm_pmu_implemented_counter_mask(vcpu) &
+				     ~BIT(ARMV8_PMU_CYCLE_IDX);
+
+		if (!vcpu_is_el2(vcpu))
+			mask &= ~kvm_pmu_hyp_counter_mask(vcpu);
+
 		for_each_set_bit(i, &mask, 32)
 			kvm_pmu_set_pmc_value(kvm_vcpu_idx_to_pmc(vcpu, i), 0, true);
 	}
-	kvm_vcpu_pmu_restore_guest(vcpu);
 }
 
 static bool kvm_pmu_counter_is_enabled(struct kvm_pmc *pmc)
@@ -692,6 +662,20 @@ static bool kvm_pmc_counts_at_el2(struct kvm_pmc *pmc)
 	return kvm_pmc_read_evtreg(pmc) & ARMV8_PMU_INCLUDE_EL2;
 }
 
+static int kvm_map_pmu_event(struct kvm *kvm, unsigned int eventsel)
+{
+	struct arm_pmu *pmu = kvm->arch.arm_pmu;
+
+	/*
+	 * The CPU PMU likely isn't PMUv3; let the driver provide a mapping
+	 * for the guest's PMUv3 event ID.
+	 */
+	if (unlikely(pmu->map_pmuv3_event))
+		return pmu->map_pmuv3_event(eventsel);
+
+	return eventsel;
+}
+
 /**
  * kvm_pmu_create_perf_event - create a perf event for a counter
  * @pmc: Counter context
@@ -702,7 +686,8 @@ static void kvm_pmu_create_perf_event(struct kvm_pmc *pmc)
 	struct arm_pmu *arm_pmu = vcpu->kvm->arch.arm_pmu;
 	struct perf_event *event;
 	struct perf_event_attr attr;
-	u64 eventsel, evtreg;
+	int eventsel;
+	u64 evtreg;
 
 	evtreg = kvm_pmc_read_evtreg(pmc);
 
@@ -728,6 +713,14 @@ static void kvm_pmu_create_perf_event(struct kvm_pmc *pmc)
 	    !test_bit(eventsel, vcpu->kvm->arch.pmu_filter))
 		return;
 
+	/*
+	 * Don't create an event if we're running on hardware that requires
+	 * PMUv3 event translation and we couldn't find a valid mapping.
+	 */
+	eventsel = kvm_map_pmu_event(vcpu->kvm, eventsel);
+	if (eventsel < 0)
+		return;
+
 	memset(&attr, 0, sizeof(struct perf_event_attr));
 	attr.type = arm_pmu->pmu.type;
 	attr.size = sizeof(attr);
@@ -785,11 +778,8 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
 	struct kvm_pmc *pmc = kvm_vcpu_idx_to_pmc(vcpu, select_idx);
 	u64 reg;
 
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return;
-
 	reg = counter_index_to_evtreg(pmc->idx);
-	__vcpu_sys_reg(vcpu, reg) = data & kvm_pmu_evtyper_mask(vcpu->kvm);
+	__vcpu_assign_sys_reg(vcpu, reg, (data & kvm_pmu_evtyper_mask(vcpu->kvm)));
 
 	kvm_pmu_create_perf_event(pmc);
 }
@@ -805,29 +795,23 @@ void kvm_host_pmu_init(struct arm_pmu *pmu)
 	if (!pmuv3_implemented(kvm_arm_pmu_get_pmuver_limit()))
 		return;
 
-	mutex_lock(&arm_pmus_lock);
+	guard(mutex)(&arm_pmus_lock);
 
 	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
 	if (!entry)
-		goto out_unlock;
+		return;
 
 	entry->arm_pmu = pmu;
 	list_add_tail(&entry->entry, &arm_pmus);
-
-	if (list_is_singular(&arm_pmus))
-		static_branch_enable(&kvm_arm_pmu_available);
-
-out_unlock:
-	mutex_unlock(&arm_pmus_lock);
 }
 
 static struct arm_pmu *kvm_pmu_probe_armpmu(void)
 {
-	struct arm_pmu *tmp, *pmu = NULL;
 	struct arm_pmu_entry *entry;
+	struct arm_pmu *pmu;
 	int cpu;
 
-	mutex_lock(&arm_pmus_lock);
+	guard(mutex)(&arm_pmus_lock);
 
 	/*
 	 * It is safe to use a stale cpu to iterate the list of PMUs so long as
@@ -848,42 +832,62 @@ static struct arm_pmu *kvm_pmu_probe_armpmu(void)
 	 */
 	cpu = raw_smp_processor_id();
 	list_for_each_entry(entry, &arm_pmus, entry) {
-		tmp = entry->arm_pmu;
+		pmu = entry->arm_pmu;
 
-		if (cpumask_test_cpu(cpu, &tmp->supported_cpus)) {
-			pmu = tmp;
-			break;
-		}
+		if (cpumask_test_cpu(cpu, &pmu->supported_cpus))
+			return pmu;
 	}
 
-	mutex_unlock(&arm_pmus_lock);
+	return NULL;
+}
+
+static u64 __compute_pmceid(struct arm_pmu *pmu, bool pmceid1)
+{
+	u32 hi[2], lo[2];
 
-	return pmu;
+	bitmap_to_arr32(lo, pmu->pmceid_bitmap, ARMV8_PMUV3_MAX_COMMON_EVENTS);
+	bitmap_to_arr32(hi, pmu->pmceid_ext_bitmap, ARMV8_PMUV3_MAX_COMMON_EVENTS);
+
+	return ((u64)hi[pmceid1] << 32) | lo[pmceid1];
+}
+
+static u64 compute_pmceid0(struct arm_pmu *pmu)
+{
+	u64 val = __compute_pmceid(pmu, 0);
+
+	/* always support SW_INCR */
+	val |= BIT(ARMV8_PMUV3_PERFCTR_SW_INCR);
+	/* always support CHAIN */
+	val |= BIT(ARMV8_PMUV3_PERFCTR_CHAIN);
+	return val;
+}
+
+static u64 compute_pmceid1(struct arm_pmu *pmu)
+{
+	u64 val = __compute_pmceid(pmu, 1);
+
+	/*
+	 * Don't advertise STALL_SLOT*, as PMMIR_EL0 is handled
+	 * as RAZ
+	 */
+	val &= ~(BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT - 32) |
+		 BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND - 32) |
+		 BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND - 32));
+	return val;
 }
 
 u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1)
 {
+	struct arm_pmu *cpu_pmu = vcpu->kvm->arch.arm_pmu;
 	unsigned long *bmap = vcpu->kvm->arch.pmu_filter;
 	u64 val, mask = 0;
 	int base, i, nr_events;
 
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return 0;
-
 	if (!pmceid1) {
-		val = read_sysreg(pmceid0_el0);
-		/* always support CHAIN */
-		val |= BIT(ARMV8_PMUV3_PERFCTR_CHAIN);
+		val = compute_pmceid0(cpu_pmu);
 		base = 0;
 	} else {
-		val = read_sysreg(pmceid1_el0);
-		/*
-		 * Don't advertise STALL_SLOT*, as PMMIR_EL0 is handled
-		 * as RAZ
-		 */
-		val &= ~(BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT - 32) |
-			 BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND - 32) |
-			 BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND - 32));
+		val = compute_pmceid1(cpu_pmu);
 		base = 32;
 	}
 
@@ -910,18 +914,15 @@ void kvm_vcpu_reload_pmu(struct kvm_vcpu *vcpu)
 {
 	u64 mask = kvm_pmu_implemented_counter_mask(vcpu);
 
-	kvm_pmu_handle_pmcr(vcpu, kvm_vcpu_read_pmcr(vcpu));
+	__vcpu_rmw_sys_reg(vcpu, PMOVSSET_EL0, &=, mask);
+	__vcpu_rmw_sys_reg(vcpu, PMINTENSET_EL1, &=, mask);
+	__vcpu_rmw_sys_reg(vcpu, PMCNTENSET_EL0, &=, mask);
 
-	__vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= mask;
-	__vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= mask;
-	__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= mask;
+	kvm_pmu_reprogram_counter_mask(vcpu, mask);
 }
 
 int kvm_arm_pmu_v3_enable(struct kvm_vcpu *vcpu)
 {
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return 0;
-
 	if (!vcpu->arch.pmu.created)
 		return -EINVAL;
 
@@ -944,9 +945,6 @@ int kvm_arm_pmu_v3_enable(struct kvm_vcpu *vcpu)
 		   return -EINVAL;
 	}
 
-	/* One-off reload of the PMU on first run */
-	kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
-
 	return 0;
 }
 
@@ -1014,18 +1012,43 @@ u8 kvm_arm_pmu_get_max_counters(struct kvm *kvm)
 	struct arm_pmu *arm_pmu = kvm->arch.arm_pmu;
 
 	/*
+	 * PMUv3 requires that all event counters are capable of counting any
+	 * event, though the same may not be true of non-PMUv3 hardware.
+	 */
+	if (cpus_have_final_cap(ARM64_WORKAROUND_PMUV3_IMPDEF_TRAPS))
+		return 1;
+
+	/*
 	 * The arm_pmu->cntr_mask considers the fixed counter(s) as well.
 	 * Ignore those and return only the general-purpose counters.
 	 */
 	return bitmap_weight(arm_pmu->cntr_mask, ARMV8_PMU_MAX_GENERAL_COUNTERS);
 }
 
+static void kvm_arm_set_nr_counters(struct kvm *kvm, unsigned int nr)
+{
+	kvm->arch.nr_pmu_counters = nr;
+
+	/* Reset MDCR_EL2.HPMN behind the vcpus' back... */
+	if (test_bit(KVM_ARM_VCPU_HAS_EL2, kvm->arch.vcpu_features)) {
+		struct kvm_vcpu *vcpu;
+		unsigned long i;
+
+		kvm_for_each_vcpu(i, vcpu, kvm) {
+			u64 val = __vcpu_sys_reg(vcpu, MDCR_EL2);
+			val &= ~MDCR_EL2_HPMN;
+			val |= FIELD_PREP(MDCR_EL2_HPMN, kvm->arch.nr_pmu_counters);
+			__vcpu_assign_sys_reg(vcpu, MDCR_EL2, val);
+		}
+	}
+}
+
 static void kvm_arm_set_pmu(struct kvm *kvm, struct arm_pmu *arm_pmu)
 {
 	lockdep_assert_held(&kvm->arch.config_lock);
 
 	kvm->arch.arm_pmu = arm_pmu;
-	kvm->arch.pmcr_n = kvm_arm_pmu_get_max_counters(kvm);
+	kvm_arm_set_nr_counters(kvm, kvm_arm_pmu_get_max_counters(kvm));
 }
 
 /**
@@ -1081,6 +1104,20 @@ static int kvm_arm_pmu_v3_set_pmu(struct kvm_vcpu *vcpu, int pmu_id)
 	return ret;
 }
 
+static int kvm_arm_pmu_v3_set_nr_counters(struct kvm_vcpu *vcpu, unsigned int n)
+{
+	struct kvm *kvm = vcpu->kvm;
+
+	if (!kvm->arch.arm_pmu)
+		return -EINVAL;
+
+	if (n > kvm_arm_pmu_get_max_counters(kvm))
+		return -EINVAL;
+
+	kvm_arm_set_nr_counters(kvm, n);
+	return 0;
+}
+
 int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 {
 	struct kvm *kvm = vcpu->kvm;
@@ -1177,6 +1214,15 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 
 		return kvm_arm_pmu_v3_set_pmu(vcpu, pmu_id);
 	}
+	case KVM_ARM_VCPU_PMU_V3_SET_NR_COUNTERS: {
+		unsigned int __user *uaddr = (unsigned int __user *)(long)attr->addr;
+		unsigned int n;
+
+		if (get_user(n, uaddr))
+			return -EFAULT;
+
+		return kvm_arm_pmu_v3_set_nr_counters(vcpu, n);
+	}
 	case KVM_ARM_VCPU_PMU_V3_INIT:
 		return kvm_arm_pmu_v3_init(vcpu);
 	}
@@ -1215,6 +1261,7 @@ int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 	case KVM_ARM_VCPU_PMU_V3_INIT:
 	case KVM_ARM_VCPU_PMU_V3_FILTER:
 	case KVM_ARM_VCPU_PMU_V3_SET_PMU:
+	case KVM_ARM_VCPU_PMU_V3_SET_NR_COUNTERS:
 		if (kvm_vcpu_has_pmu(vcpu))
 			return 0;
 	}
@@ -1224,13 +1271,26 @@ int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 
 u8 kvm_arm_pmu_get_pmuver_limit(void)
 {
-	u64 tmp;
+	unsigned int pmuver;
+
+	pmuver = SYS_FIELD_GET(ID_AA64DFR0_EL1, PMUVer,
+			       read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1));
 
-	tmp = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
-	tmp = cpuid_feature_cap_perfmon_field(tmp,
-					      ID_AA64DFR0_EL1_PMUVer_SHIFT,
-					      ID_AA64DFR0_EL1_PMUVer_V3P5);
-	return FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), tmp);
+	/*
+	 * Spoof a barebones PMUv3 implementation if the system supports IMPDEF
+	 * traps of the PMUv3 sysregs
+	 */
+	if (cpus_have_final_cap(ARM64_WORKAROUND_PMUV3_IMPDEF_TRAPS))
+		return ID_AA64DFR0_EL1_PMUVer_IMP;
+
+	/*
+	 * Otherwise, treat IMPLEMENTATION DEFINED functionality as
+	 * unimplemented
+	 */
+	if (pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF)
+		return 0;
+
+	return min(pmuver, ID_AA64DFR0_EL1_PMUVer_V3P5);
 }
 
 /**
@@ -1240,8 +1300,12 @@ u8 kvm_arm_pmu_get_pmuver_limit(void)
 u64 kvm_vcpu_read_pmcr(struct kvm_vcpu *vcpu)
 {
 	u64 pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0);
+	u64 n = vcpu->kvm->arch.nr_pmu_counters;
 
-	return u64_replace_bits(pmcr, vcpu->kvm->arch.pmcr_n, ARMV8_PMU_PMCR_N);
+	if (vcpu_has_nv(vcpu) && !vcpu_is_el2(vcpu))
+		n = FIELD_GET(MDCR_EL2_HPMN, __vcpu_sys_reg(vcpu, MDCR_EL2));
+
+	return u64_replace_bits(pmcr, n, ARMV8_PMU_PMCR_N);
 }
 
 void kvm_pmu_nested_transition(struct kvm_vcpu *vcpu)
@@ -1250,9 +1314,6 @@ void kvm_pmu_nested_transition(struct kvm_vcpu *vcpu)
 	unsigned long mask;
 	int i;
 
-	if (!kvm_vcpu_has_pmu(vcpu))
-		return;
-
 	mask = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
 	for_each_set_bit(i, &mask, 32) {
 		struct kvm_pmc *pmc = kvm_vcpu_idx_to_pmc(vcpu, i);
diff --git a/arch/arm64/kvm/pmu.c b/arch/arm64/kvm/pmu.c
index 0b3adf3e17b4..6b48a3d16d0d 100644
--- a/arch/arm64/kvm/pmu.c
+++ b/arch/arm64/kvm/pmu.c
@@ -41,7 +41,7 @@ void kvm_set_pmu_events(u64 set, struct perf_event_attr *attr)
 {
 	struct kvm_pmu_events *pmu = kvm_get_pmu_events();
 
-	if (!kvm_arm_support_pmu_v3() || !kvm_pmu_switch_needed(attr))
+	if (!system_supports_pmuv3() || !kvm_pmu_switch_needed(attr))
 		return;
 
 	if (!attr->exclude_host)
@@ -57,7 +57,7 @@ void kvm_clr_pmu_events(u64 clr)
 {
 	struct kvm_pmu_events *pmu = kvm_get_pmu_events();
 
-	if (!kvm_arm_support_pmu_v3())
+	if (!system_supports_pmuv3())
 		return;
 
 	pmu->events_host &= ~clr;
@@ -133,7 +133,7 @@ void kvm_vcpu_pmu_restore_guest(struct kvm_vcpu *vcpu)
 	struct kvm_pmu_events *pmu;
 	u64 events_guest, events_host;
 
-	if (!kvm_arm_support_pmu_v3() || !has_vhe())
+	if (!system_supports_pmuv3() || !has_vhe())
 		return;
 
 	preempt_disable();
@@ -154,7 +154,7 @@ void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu)
 	struct kvm_pmu_events *pmu;
 	u64 events_guest, events_host;
 
-	if (!kvm_arm_support_pmu_v3() || !has_vhe())
+	if (!system_supports_pmuv3() || !has_vhe())
 		return;
 
 	pmu = kvm_get_pmu_events();
@@ -180,7 +180,7 @@ bool kvm_set_pmuserenr(u64 val)
 	struct kvm_cpu_context *hctxt;
 	struct kvm_vcpu *vcpu;
 
-	if (!kvm_arm_support_pmu_v3() || !has_vhe())
+	if (!system_supports_pmuv3() || !has_vhe())
 		return false;
 
 	vcpu = kvm_get_running_vcpu();
diff --git a/arch/arm64/kvm/ptdump.c b/arch/arm64/kvm/ptdump.c
index e4a342e903e2..6cbe018fd6fd 100644
--- a/arch/arm64/kvm/ptdump.c
+++ b/arch/arm64/kvm/ptdump.c
@@ -31,29 +31,48 @@ static const struct ptdump_prot_bits stage2_pte_bits[] = {
 		.val	= PTE_VALID,
 		.set	= " ",
 		.clear	= "F",
-	}, {
-		.mask	= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R | PTE_VALID,
-		.val	= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R | PTE_VALID,
+	},
+	{
+		.mask	= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R,
+		.val	= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R,
 		.set	= "R",
 		.clear	= " ",
-	}, {
-		.mask	= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W | PTE_VALID,
-		.val	= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W | PTE_VALID,
+	},
+	{
+		.mask	= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W,
+		.val	= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W,
 		.set	= "W",
 		.clear	= " ",
-	}, {
-		.mask	= KVM_PTE_LEAF_ATTR_HI_S2_XN | PTE_VALID,
-		.val	= PTE_VALID,
-		.set	= " ",
-		.clear	= "X",
-	}, {
-		.mask	= KVM_PTE_LEAF_ATTR_LO_S2_AF | PTE_VALID,
-		.val	= KVM_PTE_LEAF_ATTR_LO_S2_AF | PTE_VALID,
+	},
+	{
+		.mask	= KVM_PTE_LEAF_ATTR_HI_S2_XN,
+		.val	= 0b00UL << __bf_shf(KVM_PTE_LEAF_ATTR_HI_S2_XN),
+		.set	= "px ux ",
+	},
+	{
+		.mask	= KVM_PTE_LEAF_ATTR_HI_S2_XN,
+		.val	= 0b01UL << __bf_shf(KVM_PTE_LEAF_ATTR_HI_S2_XN),
+		.set	= "PXNux ",
+	},
+	{
+		.mask	= KVM_PTE_LEAF_ATTR_HI_S2_XN,
+		.val	= 0b10UL << __bf_shf(KVM_PTE_LEAF_ATTR_HI_S2_XN),
+		.set	= "PXNUXN",
+	},
+	{
+		.mask	= KVM_PTE_LEAF_ATTR_HI_S2_XN,
+		.val	= 0b11UL << __bf_shf(KVM_PTE_LEAF_ATTR_HI_S2_XN),
+		.set	= "px UXN",
+	},
+	{
+		.mask	= KVM_PTE_LEAF_ATTR_LO_S2_AF,
+		.val	= KVM_PTE_LEAF_ATTR_LO_S2_AF,
 		.set	= "AF",
 		.clear	= "  ",
-	}, {
-		.mask	= PTE_TABLE_BIT | PTE_VALID,
-		.val	= PTE_VALID,
+	},
+	{
+		.mask	= PMD_TYPE_MASK,
+		.val	= PMD_TYPE_SECT,
 		.set	= "BLK",
 		.clear	= "   ",
 	},
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index 470524b31951..959532422d3a 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -85,7 +85,7 @@ static void kvm_vcpu_enable_sve(struct kvm_vcpu *vcpu)
 	 * KVM_REG_ARM64_SVE_VLS.  Allocation is deferred until
 	 * kvm_arm_vcpu_finalize(), which freezes the configuration.
 	 */
-	vcpu_set_flag(vcpu, GUEST_HAS_SVE);
+	set_bit(KVM_ARCH_FLAG_GUEST_HAS_SVE, &vcpu->kvm->arch.flags);
 }
 
 /*
@@ -158,6 +158,8 @@ void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu)
 	if (sve_state)
 		kvm_unshare_hyp(sve_state, sve_state + vcpu_sve_state_size(vcpu));
 	kfree(sve_state);
+	free_page((unsigned long)vcpu->arch.ctxt.vncr_array);
+	kfree(vcpu->arch.vncr_tlb);
 	kfree(vcpu->arch.ccsidr);
 }
 
@@ -196,9 +198,6 @@ void kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	vcpu->arch.reset_state.reset = false;
 	spin_unlock(&vcpu->arch.mp_state_lock);
 
-	/* Reset PMU outside of the non-preemptible section */
-	kvm_pmu_vcpu_reset(vcpu);
-
 	preempt_disable();
 	loaded = (vcpu->cpu != -1);
 	if (loaded)
@@ -211,10 +210,6 @@ void kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 		kvm_vcpu_reset_sve(vcpu);
 	}
 
-	if (vcpu_has_feature(vcpu, KVM_ARM_VCPU_PTRAUTH_ADDRESS) ||
-	    vcpu_has_feature(vcpu, KVM_ARM_VCPU_PTRAUTH_GENERIC))
-		kvm_vcpu_enable_ptrauth(vcpu);
-
 	if (vcpu_el1_is_32bit(vcpu))
 		pstate = VCPU_RESET_PSTATE_SVC;
 	else if (vcpu_has_nv(vcpu))
diff --git a/arch/arm64/kvm/stacktrace.c b/arch/arm64/kvm/stacktrace.c
index 3ace5b75813b..af5eec681127 100644
--- a/arch/arm64/kvm/stacktrace.c
+++ b/arch/arm64/kvm/stacktrace.c
@@ -19,6 +19,7 @@
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 
+#include <asm/kvm_mmu.h>
 #include <asm/stacktrace/nvhe.h>
 
 static struct stack_info stackinfo_get_overflow(void)
@@ -50,7 +51,7 @@ static struct stack_info stackinfo_get_hyp(void)
 	struct kvm_nvhe_stacktrace_info *stacktrace_info
 				= this_cpu_ptr_nvhe_sym(kvm_stacktrace_info);
 	unsigned long low = (unsigned long)stacktrace_info->stack_base;
-	unsigned long high = low + PAGE_SIZE;
+	unsigned long high = low + NVHE_STACK_SIZE;
 
 	return (struct stack_info) {
 		.low = low,
@@ -60,8 +61,8 @@ static struct stack_info stackinfo_get_hyp(void)
 
 static struct stack_info stackinfo_get_hyp_kern_va(void)
 {
-	unsigned long low = (unsigned long)*this_cpu_ptr(&kvm_arm_hyp_stack_page);
-	unsigned long high = low + PAGE_SIZE;
+	unsigned long low = (unsigned long)*this_cpu_ptr(&kvm_arm_hyp_stack_base);
+	unsigned long high = low + NVHE_STACK_SIZE;
 
 	return (struct stack_info) {
 		.low = low,
@@ -145,7 +146,7 @@ static void unwind(struct unwind_state *state,
  */
 static bool kvm_nvhe_dump_backtrace_entry(void *arg, unsigned long where)
 {
-	unsigned long va_mask = GENMASK_ULL(vabits_actual - 1, 0);
+	unsigned long va_mask = GENMASK_ULL(__hyp_va_bits - 1, 0);
 	unsigned long hyp_offset = (unsigned long)arg;
 
 	/* Mask tags and convert to kern addr */
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 83c6b4a07ef5..c8fd7c6a12a1 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -17,6 +17,7 @@
 #include <linux/mm.h>
 #include <linux/printk.h>
 #include <linux/uaccess.h>
+#include <linux/irqchip/arm-gic-v3.h>
 
 #include <asm/arm_pmuv3.h>
 #include <asm/cacheflush.h>
@@ -81,44 +82,105 @@ static bool write_to_read_only(struct kvm_vcpu *vcpu,
 			"sys_reg write to read-only register");
 }
 
-#define PURE_EL2_SYSREG(el2)						\
-	case el2: {							\
-		*el1r = el2;						\
-		return true;						\
+enum sr_loc_attr {
+	SR_LOC_MEMORY	= 0,	  /* Register definitely in memory */
+	SR_LOC_LOADED	= BIT(0), /* Register on CPU, unless it cannot */
+	SR_LOC_MAPPED	= BIT(1), /* Register in a different CPU register */
+	SR_LOC_XLATED	= BIT(2), /* Register translated to fit another reg */
+	SR_LOC_SPECIAL	= BIT(3), /* Demanding register, implies loaded */
+};
+
+struct sr_loc {
+	enum sr_loc_attr loc;
+	enum vcpu_sysreg map_reg;
+	u64		 (*xlate)(u64);
+};
+
+static enum sr_loc_attr locate_direct_register(const struct kvm_vcpu *vcpu,
+					       enum vcpu_sysreg reg)
+{
+	switch (reg) {
+	case SCTLR_EL1:
+	case CPACR_EL1:
+	case TTBR0_EL1:
+	case TTBR1_EL1:
+	case TCR_EL1:
+	case TCR2_EL1:
+	case PIR_EL1:
+	case PIRE0_EL1:
+	case POR_EL1:
+	case ESR_EL1:
+	case AFSR0_EL1:
+	case AFSR1_EL1:
+	case FAR_EL1:
+	case MAIR_EL1:
+	case VBAR_EL1:
+	case CONTEXTIDR_EL1:
+	case AMAIR_EL1:
+	case CNTKCTL_EL1:
+	case ELR_EL1:
+	case SPSR_EL1:
+	case ZCR_EL1:
+	case SCTLR2_EL1:
+		/*
+		 * EL1 registers which have an ELx2 mapping are loaded if
+		 * we're not in hypervisor context.
+		 */
+		return is_hyp_ctxt(vcpu) ? SR_LOC_MEMORY : SR_LOC_LOADED;
+
+	case TPIDR_EL0:
+	case TPIDRRO_EL0:
+	case TPIDR_EL1:
+	case PAR_EL1:
+	case DACR32_EL2:
+	case IFSR32_EL2:
+	case DBGVCR32_EL2:
+		/* These registers are always loaded, no matter what */
+		return SR_LOC_LOADED;
+
+	default:
+		/* Non-mapped EL2 registers are by definition in memory. */
+		return SR_LOC_MEMORY;
 	}
+}
 
-#define MAPPED_EL2_SYSREG(el2, el1, fn)					\
-	case el2: {							\
-		*xlate = fn;						\
-		*el1r = el1;						\
-		return true;						\
+static void locate_mapped_el2_register(const struct kvm_vcpu *vcpu,
+				       enum vcpu_sysreg reg,
+				       enum vcpu_sysreg map_reg,
+				       u64 (*xlate)(u64),
+				       struct sr_loc *loc)
+{
+	if (!is_hyp_ctxt(vcpu)) {
+		loc->loc = SR_LOC_MEMORY;
+		return;
+	}
+
+	loc->loc = SR_LOC_LOADED | SR_LOC_MAPPED;
+	loc->map_reg = map_reg;
+
+	WARN_ON(locate_direct_register(vcpu, map_reg) != SR_LOC_MEMORY);
+
+	if (xlate != NULL && !vcpu_el2_e2h_is_set(vcpu)) {
+		loc->loc |= SR_LOC_XLATED;
+		loc->xlate = xlate;
 	}
+}
 
-static bool get_el2_to_el1_mapping(unsigned int reg,
-				   unsigned int *el1r, u64 (**xlate)(u64))
+#define MAPPED_EL2_SYSREG(r, m, t)					\
+	case r:	{							\
+		locate_mapped_el2_register(vcpu, r, m, t, loc);		\
+		break;							\
+	}
+
+static void locate_register(const struct kvm_vcpu *vcpu, enum vcpu_sysreg reg,
+			    struct sr_loc *loc)
 {
+	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU)) {
+		loc->loc = SR_LOC_MEMORY;
+		return;
+	}
+
 	switch (reg) {
-		PURE_EL2_SYSREG(  VPIDR_EL2	);
-		PURE_EL2_SYSREG(  VMPIDR_EL2	);
-		PURE_EL2_SYSREG(  ACTLR_EL2	);
-		PURE_EL2_SYSREG(  HCR_EL2	);
-		PURE_EL2_SYSREG(  MDCR_EL2	);
-		PURE_EL2_SYSREG(  HSTR_EL2	);
-		PURE_EL2_SYSREG(  HACR_EL2	);
-		PURE_EL2_SYSREG(  VTTBR_EL2	);
-		PURE_EL2_SYSREG(  VTCR_EL2	);
-		PURE_EL2_SYSREG(  RVBAR_EL2	);
-		PURE_EL2_SYSREG(  TPIDR_EL2	);
-		PURE_EL2_SYSREG(  HPFAR_EL2	);
-		PURE_EL2_SYSREG(  HCRX_EL2	);
-		PURE_EL2_SYSREG(  HFGRTR_EL2	);
-		PURE_EL2_SYSREG(  HFGWTR_EL2	);
-		PURE_EL2_SYSREG(  HFGITR_EL2	);
-		PURE_EL2_SYSREG(  HDFGRTR_EL2	);
-		PURE_EL2_SYSREG(  HDFGWTR_EL2	);
-		PURE_EL2_SYSREG(  HAFGRTR_EL2	);
-		PURE_EL2_SYSREG(  CNTVOFF_EL2	);
-		PURE_EL2_SYSREG(  CNTHCTL_EL2	);
 		MAPPED_EL2_SYSREG(SCTLR_EL2,   SCTLR_EL1,
 				  translate_sctlr_el2_to_sctlr_el1	     );
 		MAPPED_EL2_SYSREG(CPTR_EL2,    CPACR_EL1,
@@ -141,128 +203,192 @@ static bool get_el2_to_el1_mapping(unsigned int reg,
 		MAPPED_EL2_SYSREG(AMAIR_EL2,   AMAIR_EL1,   NULL	     );
 		MAPPED_EL2_SYSREG(ELR_EL2,     ELR_EL1,	    NULL	     );
 		MAPPED_EL2_SYSREG(SPSR_EL2,    SPSR_EL1,    NULL	     );
-		MAPPED_EL2_SYSREG(ZCR_EL2,     ZCR_EL1,     NULL	     );
 		MAPPED_EL2_SYSREG(CONTEXTIDR_EL2, CONTEXTIDR_EL1, NULL	     );
+		MAPPED_EL2_SYSREG(SCTLR2_EL2,  SCTLR2_EL1,  NULL	     );
+	case CNTHCTL_EL2:
+		/* CNTHCTL_EL2 is super special, until we support NV2.1 */
+		loc->loc = ((is_hyp_ctxt(vcpu) && vcpu_el2_e2h_is_set(vcpu)) ?
+			    SR_LOC_SPECIAL : SR_LOC_MEMORY);
+		break;
 	default:
-		return false;
+		loc->loc = locate_direct_register(vcpu, reg);
 	}
 }
 
-u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg)
+static u64 read_sr_from_cpu(enum vcpu_sysreg reg)
 {
 	u64 val = 0x8badf00d8badf00d;
-	u64 (*xlate)(u64) = NULL;
-	unsigned int el1r;
 
-	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
-		goto memory_read;
+	switch (reg) {
+	case SCTLR_EL1:		val = read_sysreg_s(SYS_SCTLR_EL12);	break;
+	case CPACR_EL1:		val = read_sysreg_s(SYS_CPACR_EL12);	break;
+	case TTBR0_EL1:		val = read_sysreg_s(SYS_TTBR0_EL12);	break;
+	case TTBR1_EL1:		val = read_sysreg_s(SYS_TTBR1_EL12);	break;
+	case TCR_EL1:		val = read_sysreg_s(SYS_TCR_EL12);	break;
+	case TCR2_EL1:		val = read_sysreg_s(SYS_TCR2_EL12);	break;
+	case PIR_EL1:		val = read_sysreg_s(SYS_PIR_EL12);	break;
+	case PIRE0_EL1:		val = read_sysreg_s(SYS_PIRE0_EL12);	break;
+	case POR_EL1:		val = read_sysreg_s(SYS_POR_EL12);	break;
+	case ESR_EL1:		val = read_sysreg_s(SYS_ESR_EL12);	break;
+	case AFSR0_EL1:		val = read_sysreg_s(SYS_AFSR0_EL12);	break;
+	case AFSR1_EL1:		val = read_sysreg_s(SYS_AFSR1_EL12);	break;
+	case FAR_EL1:		val = read_sysreg_s(SYS_FAR_EL12);	break;
+	case MAIR_EL1:		val = read_sysreg_s(SYS_MAIR_EL12);	break;
+	case VBAR_EL1:		val = read_sysreg_s(SYS_VBAR_EL12);	break;
+	case CONTEXTIDR_EL1:	val = read_sysreg_s(SYS_CONTEXTIDR_EL12);break;
+	case AMAIR_EL1:		val = read_sysreg_s(SYS_AMAIR_EL12);	break;
+	case CNTKCTL_EL1:	val = read_sysreg_s(SYS_CNTKCTL_EL12);	break;
+	case ELR_EL1:		val = read_sysreg_s(SYS_ELR_EL12);	break;
+	case SPSR_EL1:		val = read_sysreg_s(SYS_SPSR_EL12);	break;
+	case ZCR_EL1:		val = read_sysreg_s(SYS_ZCR_EL12);	break;
+	case SCTLR2_EL1:	val = read_sysreg_s(SYS_SCTLR2_EL12);	break;
+	case TPIDR_EL0:		val = read_sysreg_s(SYS_TPIDR_EL0);	break;
+	case TPIDRRO_EL0:	val = read_sysreg_s(SYS_TPIDRRO_EL0);	break;
+	case TPIDR_EL1:		val = read_sysreg_s(SYS_TPIDR_EL1);	break;
+	case PAR_EL1:		val = read_sysreg_par();		break;
+	case DACR32_EL2:	val = read_sysreg_s(SYS_DACR32_EL2);	break;
+	case IFSR32_EL2:	val = read_sysreg_s(SYS_IFSR32_EL2);	break;
+	case DBGVCR32_EL2:	val = read_sysreg_s(SYS_DBGVCR32_EL2);	break;
+	default:		WARN_ON_ONCE(1);
+	}
 
-	if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) {
-		if (!is_hyp_ctxt(vcpu))
-			goto memory_read;
+	return val;
+}
+
+static void write_sr_to_cpu(enum vcpu_sysreg reg, u64 val)
+{
+	switch (reg) {
+	case SCTLR_EL1:		write_sysreg_s(val, SYS_SCTLR_EL12);	break;
+	case CPACR_EL1:		write_sysreg_s(val, SYS_CPACR_EL12);	break;
+	case TTBR0_EL1:		write_sysreg_s(val, SYS_TTBR0_EL12);	break;
+	case TTBR1_EL1:		write_sysreg_s(val, SYS_TTBR1_EL12);	break;
+	case TCR_EL1:		write_sysreg_s(val, SYS_TCR_EL12);	break;
+	case TCR2_EL1:		write_sysreg_s(val, SYS_TCR2_EL12);	break;
+	case PIR_EL1:		write_sysreg_s(val, SYS_PIR_EL12);	break;
+	case PIRE0_EL1:		write_sysreg_s(val, SYS_PIRE0_EL12);	break;
+	case POR_EL1:		write_sysreg_s(val, SYS_POR_EL12);	break;
+	case ESR_EL1:		write_sysreg_s(val, SYS_ESR_EL12);	break;
+	case AFSR0_EL1:		write_sysreg_s(val, SYS_AFSR0_EL12);	break;
+	case AFSR1_EL1:		write_sysreg_s(val, SYS_AFSR1_EL12);	break;
+	case FAR_EL1:		write_sysreg_s(val, SYS_FAR_EL12);	break;
+	case MAIR_EL1:		write_sysreg_s(val, SYS_MAIR_EL12);	break;
+	case VBAR_EL1:		write_sysreg_s(val, SYS_VBAR_EL12);	break;
+	case CONTEXTIDR_EL1:	write_sysreg_s(val, SYS_CONTEXTIDR_EL12);break;
+	case AMAIR_EL1:		write_sysreg_s(val, SYS_AMAIR_EL12);	break;
+	case CNTKCTL_EL1:	write_sysreg_s(val, SYS_CNTKCTL_EL12);	break;
+	case ELR_EL1:		write_sysreg_s(val, SYS_ELR_EL12);	break;
+	case SPSR_EL1:		write_sysreg_s(val, SYS_SPSR_EL12);	break;
+	case ZCR_EL1:		write_sysreg_s(val, SYS_ZCR_EL12);	break;
+	case SCTLR2_EL1:	write_sysreg_s(val, SYS_SCTLR2_EL12);	break;
+	case TPIDR_EL0:		write_sysreg_s(val, SYS_TPIDR_EL0);	break;
+	case TPIDRRO_EL0:	write_sysreg_s(val, SYS_TPIDRRO_EL0);	break;
+	case TPIDR_EL1:		write_sysreg_s(val, SYS_TPIDR_EL1);	break;
+	case PAR_EL1:		write_sysreg_s(val, SYS_PAR_EL1);	break;
+	case DACR32_EL2:	write_sysreg_s(val, SYS_DACR32_EL2);	break;
+	case IFSR32_EL2:	write_sysreg_s(val, SYS_IFSR32_EL2);	break;
+	case DBGVCR32_EL2:	write_sysreg_s(val, SYS_DBGVCR32_EL2);	break;
+	default:		WARN_ON_ONCE(1);
+	}
+}
+
+u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, enum vcpu_sysreg reg)
+{
+	struct sr_loc loc = {};
+
+	locate_register(vcpu, reg, &loc);
+
+	WARN_ON_ONCE(!has_vhe() && loc.loc != SR_LOC_MEMORY);
+
+	if (loc.loc & SR_LOC_SPECIAL) {
+		u64 val;
+
+		WARN_ON_ONCE(loc.loc & ~SR_LOC_SPECIAL);
 
 		/*
-		 * CNTHCTL_EL2 requires some special treatment to
-		 * account for the bits that can be set via CNTKCTL_EL1.
+		 * CNTHCTL_EL2 requires some special treatment to account
+		 * for the bits that can be set via CNTKCTL_EL1 when E2H==1.
 		 */
 		switch (reg) {
 		case CNTHCTL_EL2:
-			if (vcpu_el2_e2h_is_set(vcpu)) {
-				val = read_sysreg_el1(SYS_CNTKCTL);
-				val &= CNTKCTL_VALID_BITS;
-				val |= __vcpu_sys_reg(vcpu, reg) & ~CNTKCTL_VALID_BITS;
-				return val;
-			}
-			break;
+			val = read_sysreg_el1(SYS_CNTKCTL);
+			val &= CNTKCTL_VALID_BITS;
+			val |= __vcpu_sys_reg(vcpu, reg) & ~CNTKCTL_VALID_BITS;
+			return val;
+		default:
+			WARN_ON_ONCE(1);
 		}
+	}
 
-		/*
-		 * If this register does not have an EL1 counterpart,
-		 * then read the stored EL2 version.
-		 */
-		if (reg == el1r)
-			goto memory_read;
+	if (loc.loc & SR_LOC_LOADED) {
+		enum vcpu_sysreg map_reg = reg;
 
-		/*
-		 * If we have a non-VHE guest and that the sysreg
-		 * requires translation to be used at EL1, use the
-		 * in-memory copy instead.
-		 */
-		if (!vcpu_el2_e2h_is_set(vcpu) && xlate)
-			goto memory_read;
+		if (loc.loc & SR_LOC_MAPPED)
+			map_reg = loc.map_reg;
 
-		/* Get the current version of the EL1 counterpart. */
-		WARN_ON(!__vcpu_read_sys_reg_from_cpu(el1r, &val));
-		if (reg >= __SANITISED_REG_START__)
-			val = kvm_vcpu_apply_reg_masks(vcpu, reg, val);
-
-		return val;
-	}
+		if (!(loc.loc & SR_LOC_XLATED)) {
+			u64 val = read_sr_from_cpu(map_reg);
 
-	/* EL1 register can't be on the CPU if the guest is in vEL2. */
-	if (unlikely(is_hyp_ctxt(vcpu)))
-		goto memory_read;
+			if (reg >= __SANITISED_REG_START__)
+				val = kvm_vcpu_apply_reg_masks(vcpu, reg, val);
 
-	if (__vcpu_read_sys_reg_from_cpu(reg, &val))
-		return val;
+			return val;
+		}
+	}
 
-memory_read:
 	return __vcpu_sys_reg(vcpu, reg);
 }
 
-void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
+void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, enum vcpu_sysreg reg)
 {
-	u64 (*xlate)(u64) = NULL;
-	unsigned int el1r;
+	struct sr_loc loc = {};
 
-	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
-		goto memory_write;
+	locate_register(vcpu, reg, &loc);
 
-	if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) {
-		if (!is_hyp_ctxt(vcpu))
-			goto memory_write;
+	WARN_ON_ONCE(!has_vhe() && loc.loc != SR_LOC_MEMORY);
 
-		/*
-		 * Always store a copy of the write to memory to avoid having
-		 * to reverse-translate virtual EL2 system registers for a
-		 * non-VHE guest hypervisor.
-		 */
-		__vcpu_sys_reg(vcpu, reg) = val;
+	if (loc.loc & SR_LOC_SPECIAL) {
+
+		WARN_ON_ONCE(loc.loc & ~SR_LOC_SPECIAL);
 
 		switch (reg) {
 		case CNTHCTL_EL2:
 			/*
-			 * If E2H=0, CNHTCTL_EL2 is a pure shadow register.
-			 * Otherwise, some of the bits are backed by
+			 * If E2H=1, some of the bits are backed by
 			 * CNTKCTL_EL1, while the rest is kept in memory.
 			 * Yes, this is fun stuff.
 			 */
-			if (vcpu_el2_e2h_is_set(vcpu))
-				write_sysreg_el1(val, SYS_CNTKCTL);
-			return;
+			write_sysreg_el1(val, SYS_CNTKCTL);
+			break;
+		default:
+			WARN_ON_ONCE(1);
 		}
+	}
 
-		/* No EL1 counterpart? We're done here.? */
-		if (reg == el1r)
-			return;
+	if (loc.loc & SR_LOC_LOADED) {
+		enum vcpu_sysreg map_reg = reg;
+		u64 xlated_val;
 
-		if (!vcpu_el2_e2h_is_set(vcpu) && xlate)
-			val = xlate(val);
+		if (reg >= __SANITISED_REG_START__)
+			val = kvm_vcpu_apply_reg_masks(vcpu, reg, val);
 
-		/* Redirect this to the EL1 version of the register. */
-		WARN_ON(!__vcpu_write_sys_reg_to_cpu(val, el1r));
-		return;
-	}
+		if (loc.loc & SR_LOC_MAPPED)
+			map_reg = loc.map_reg;
 
-	/* EL1 register can't be on the CPU if the guest is in vEL2. */
-	if (unlikely(is_hyp_ctxt(vcpu)))
-		goto memory_write;
+		if (loc.loc & SR_LOC_XLATED)
+			xlated_val = loc.xlate(val);
+		else
+			xlated_val = val;
 
-	if (__vcpu_write_sys_reg_to_cpu(val, reg))
-		return;
+		write_sr_to_cpu(map_reg, xlated_val);
+
+		/*
+		 * Fall through to write the backing store anyway, which
+		 * allows translated registers to be directly read without a
+		 * reverse translation.
+		 */
+	}
 
-memory_write:
-	 __vcpu_sys_reg(vcpu, reg) = val;
+	__vcpu_assign_sys_reg(vcpu, reg, val);
 }
 
 /* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */
@@ -531,7 +657,27 @@ static bool access_gic_sre(struct kvm_vcpu *vcpu,
 	if (p->is_write)
 		return ignore_write(vcpu, p);
 
-	p->regval = vcpu->arch.vgic_cpu.vgic_v3.vgic_sre;
+	if (p->Op1 == 4) {	/* ICC_SRE_EL2 */
+		p->regval = KVM_ICC_SRE_EL2;
+	} else {		/* ICC_SRE_EL1 */
+		p->regval = vcpu->arch.vgic_cpu.vgic_v3.vgic_sre;
+	}
+
+	return true;
+}
+
+static bool access_gic_dir(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	if (!kvm_has_gicv3(vcpu->kvm))
+		return undef_access(vcpu, p, r);
+
+	if (!p->is_write)
+		return undef_access(vcpu, p, r);
+
+	vgic_v3_deactivate(vcpu, p->regval);
+
 	return true;
 }
 
@@ -570,17 +716,10 @@ static bool trap_oslar_el1(struct kvm_vcpu *vcpu,
 			   struct sys_reg_params *p,
 			   const struct sys_reg_desc *r)
 {
-	u64 oslsr;
-
 	if (!p->is_write)
 		return read_from_write_only(vcpu, p, r);
 
-	/* Forward the OSLK bit to OSLSR */
-	oslsr = __vcpu_sys_reg(vcpu, OSLSR_EL1) & ~OSLSR_EL1_OSLK;
-	if (p->regval & OSLAR_EL1_OSLK)
-		oslsr |= OSLSR_EL1_OSLK;
-
-	__vcpu_sys_reg(vcpu, OSLSR_EL1) = oslsr;
+	kvm_debug_handle_oslar(vcpu, p->regval);
 	return true;
 }
 
@@ -605,7 +744,7 @@ static int set_oslsr_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	if ((val ^ rd->val) & ~OSLSR_EL1_OSLK)
 		return -EINVAL;
 
-	__vcpu_sys_reg(vcpu, rd->reg) = val;
+	__vcpu_assign_sys_reg(vcpu, rd->reg, val);
 	return 0;
 }
 
@@ -621,43 +760,13 @@ static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu,
 	}
 }
 
-/*
- * We want to avoid world-switching all the DBG registers all the
- * time:
- *
- * - If we've touched any debug register, it is likely that we're
- *   going to touch more of them. It then makes sense to disable the
- *   traps and start doing the save/restore dance
- * - If debug is active (DBG_MDSCR_KDE or DBG_MDSCR_MDE set), it is
- *   then mandatory to save/restore the registers, as the guest
- *   depends on them.
- *
- * For this, we use a DIRTY bit, indicating the guest has modified the
- * debug registers, used as follow:
- *
- * On guest entry:
- * - If the dirty bit is set (because we're coming back from trapping),
- *   disable the traps, save host registers, restore guest registers.
- * - If debug is actively in use (DBG_MDSCR_KDE or DBG_MDSCR_MDE set),
- *   set the dirty bit, disable the traps, save host registers,
- *   restore guest registers.
- * - Otherwise, enable the traps
- *
- * On guest exit:
- * - If the dirty bit is set, save guest registers, restore host
- *   registers and clear the dirty bit. This ensure that the host can
- *   now use the debug registers.
- */
 static bool trap_debug_regs(struct kvm_vcpu *vcpu,
 			    struct sys_reg_params *p,
 			    const struct sys_reg_desc *r)
 {
 	access_rw(vcpu, p, r);
-	if (p->is_write)
-		vcpu_set_flag(vcpu, DEBUG_DIRTY);
-
-	trace_trap_reg(__func__, r->reg, p->is_write, p->regval);
 
+	kvm_debug_set_guest_ownership(vcpu);
 	return true;
 }
 
@@ -666,9 +775,6 @@ static bool trap_debug_regs(struct kvm_vcpu *vcpu,
  *
  * A 32 bit write to a debug register leave top bits alone
  * A 32 bit read from a debug register only returns the bottom bits
- *
- * All writes will set the DEBUG_DIRTY flag to ensure the hyp code
- * switches between host and guest values in future.
  */
 static void reg_to_dbg(struct kvm_vcpu *vcpu,
 		       struct sys_reg_params *p,
@@ -683,8 +789,6 @@ static void reg_to_dbg(struct kvm_vcpu *vcpu,
 	val &= ~mask;
 	val |= (p->regval & (mask >> shift)) << shift;
 	*dbg_reg = val;
-
-	vcpu_set_flag(vcpu, DEBUG_DIRTY);
 }
 
 static void dbg_to_reg(struct kvm_vcpu *vcpu,
@@ -698,152 +802,79 @@ static void dbg_to_reg(struct kvm_vcpu *vcpu,
 	p->regval = (*dbg_reg & mask) >> shift;
 }
 
-static bool trap_bvr(struct kvm_vcpu *vcpu,
-		     struct sys_reg_params *p,
-		     const struct sys_reg_desc *rd)
+static u64 *demux_wb_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
-
-	if (p->is_write)
-		reg_to_dbg(vcpu, p, rd, dbg_reg);
-	else
-		dbg_to_reg(vcpu, p, rd, dbg_reg);
-
-	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
+	struct kvm_guest_debug_arch *dbg = &vcpu->arch.vcpu_debug_state;
 
-	return true;
-}
-
-static int set_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 val)
-{
-	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm] = val;
-	return 0;
-}
-
-static int get_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 *val)
-{
-	*val = vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
-	return 0;
+	switch (rd->Op2) {
+	case 0b100:
+		return &dbg->dbg_bvr[rd->CRm];
+	case 0b101:
+		return &dbg->dbg_bcr[rd->CRm];
+	case 0b110:
+		return &dbg->dbg_wvr[rd->CRm];
+	case 0b111:
+		return &dbg->dbg_wcr[rd->CRm];
+	default:
+		KVM_BUG_ON(1, vcpu->kvm);
+		return NULL;
+	}
 }
 
-static u64 reset_bvr(struct kvm_vcpu *vcpu,
-		      const struct sys_reg_desc *rd)
+static bool trap_dbg_wb_reg(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			    const struct sys_reg_desc *rd)
 {
-	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm] = rd->val;
-	return rd->val;
-}
+	u64 *reg = demux_wb_reg(vcpu, rd);
 
-static bool trap_bcr(struct kvm_vcpu *vcpu,
-		     struct sys_reg_params *p,
-		     const struct sys_reg_desc *rd)
-{
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
+	if (!reg)
+		return false;
 
 	if (p->is_write)
-		reg_to_dbg(vcpu, p, rd, dbg_reg);
+		reg_to_dbg(vcpu, p, rd, reg);
 	else
-		dbg_to_reg(vcpu, p, rd, dbg_reg);
-
-	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
+		dbg_to_reg(vcpu, p, rd, reg);
 
+	kvm_debug_set_guest_ownership(vcpu);
 	return true;
 }
 
-static int set_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 val)
-{
-	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm] = val;
-	return 0;
-}
-
-static int get_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 *val)
-{
-	*val = vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
-	return 0;
-}
-
-static u64 reset_bcr(struct kvm_vcpu *vcpu,
-		      const struct sys_reg_desc *rd)
+static int set_dbg_wb_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+			  u64 val)
 {
-	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm] = rd->val;
-	return rd->val;
-}
-
-static bool trap_wvr(struct kvm_vcpu *vcpu,
-		     struct sys_reg_params *p,
-		     const struct sys_reg_desc *rd)
-{
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
-
-	if (p->is_write)
-		reg_to_dbg(vcpu, p, rd, dbg_reg);
-	else
-		dbg_to_reg(vcpu, p, rd, dbg_reg);
-
-	trace_trap_reg(__func__, rd->CRm, p->is_write,
-		vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm]);
-
-	return true;
-}
+	u64 *reg = demux_wb_reg(vcpu, rd);
 
-static int set_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 val)
-{
-	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm] = val;
-	return 0;
-}
+	if (!reg)
+		return -EINVAL;
 
-static int get_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 *val)
-{
-	*val = vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
+	*reg = val;
 	return 0;
 }
 
-static u64 reset_wvr(struct kvm_vcpu *vcpu,
-		      const struct sys_reg_desc *rd)
-{
-	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm] = rd->val;
-	return rd->val;
-}
-
-static bool trap_wcr(struct kvm_vcpu *vcpu,
-		     struct sys_reg_params *p,
-		     const struct sys_reg_desc *rd)
+static int get_dbg_wb_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+			  u64 *val)
 {
-	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
+	u64 *reg = demux_wb_reg(vcpu, rd);
 
-	if (p->is_write)
-		reg_to_dbg(vcpu, p, rd, dbg_reg);
-	else
-		dbg_to_reg(vcpu, p, rd, dbg_reg);
-
-	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
-
-	return true;
-}
+	if (!reg)
+		return -EINVAL;
 
-static int set_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 val)
-{
-	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm] = val;
+	*val = *reg;
 	return 0;
 }
 
-static int get_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
-		   u64 *val)
+static u64 reset_dbg_wb_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd)
 {
-	*val = vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
-	return 0;
-}
+	u64 *reg = demux_wb_reg(vcpu, rd);
 
-static u64 reset_wcr(struct kvm_vcpu *vcpu,
-		      const struct sys_reg_desc *rd)
-{
-	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm] = rd->val;
+	/*
+	 * Bail early if we couldn't find storage for the register, the
+	 * KVM_BUG_ON() in demux_wb_reg() will prevent this VM from ever
+	 * being run.
+	 */
+	if (!reg)
+		return 0;
+
+	*reg = rd->val;
 	return rd->val;
 }
 
@@ -881,6 +912,12 @@ static u64 reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	return mpidr;
 }
 
+static unsigned int hidden_visibility(const struct kvm_vcpu *vcpu,
+				      const struct sys_reg_desc *r)
+{
+	return REG_HIDDEN;
+}
+
 static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu,
 				   const struct sys_reg_desc *r)
 {
@@ -893,13 +930,13 @@ static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu,
 static u64 reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	u64 mask = BIT(ARMV8_PMU_CYCLE_IDX);
-	u8 n = vcpu->kvm->arch.pmcr_n;
+	u8 n = vcpu->kvm->arch.nr_pmu_counters;
 
 	if (n)
 		mask |= GENMASK(n - 1, 0);
 
 	reset_unknown(vcpu, r);
-	__vcpu_sys_reg(vcpu, r->reg) &= mask;
+	__vcpu_rmw_sys_reg(vcpu, r->reg, &=, mask);
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -907,7 +944,7 @@ static u64 reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 static u64 reset_pmevcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	reset_unknown(vcpu, r);
-	__vcpu_sys_reg(vcpu, r->reg) &= GENMASK(31, 0);
+	__vcpu_rmw_sys_reg(vcpu, r->reg, &=, GENMASK(31, 0));
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -919,7 +956,7 @@ static u64 reset_pmevtyper(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 		return 0;
 
 	reset_unknown(vcpu, r);
-	__vcpu_sys_reg(vcpu, r->reg) &= kvm_pmu_evtyper_mask(vcpu->kvm);
+	__vcpu_rmw_sys_reg(vcpu, r->reg, &=, kvm_pmu_evtyper_mask(vcpu->kvm));
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -927,7 +964,7 @@ static u64 reset_pmevtyper(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 static u64 reset_pmselr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	reset_unknown(vcpu, r);
-	__vcpu_sys_reg(vcpu, r->reg) &= PMSELR_EL0_SEL_MASK;
+	__vcpu_rmw_sys_reg(vcpu, r->reg, &=, PMSELR_EL0_SEL_MASK);
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -943,7 +980,7 @@ static u64 reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	 * The value of PMCR.N field is included when the
 	 * vCPU register is read via kvm_vcpu_read_pmcr().
 	 */
-	__vcpu_sys_reg(vcpu, r->reg) = pmcr;
+	__vcpu_assign_sys_reg(vcpu, r->reg, pmcr);
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -1015,7 +1052,7 @@ static bool access_pmselr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		return false;
 
 	if (p->is_write)
-		__vcpu_sys_reg(vcpu, PMSELR_EL0) = p->regval;
+		__vcpu_assign_sys_reg(vcpu, PMSELR_EL0, p->regval);
 	else
 		/* return PMSELR.SEL field */
 		p->regval = __vcpu_sys_reg(vcpu, PMSELR_EL0)
@@ -1075,6 +1112,22 @@ static int get_pmu_evcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 	return 0;
 }
 
+static int set_pmu_evcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			  u64 val)
+{
+	u64 idx;
+
+	if (r->CRn == 9 && r->CRm == 13 && r->Op2 == 0)
+		/* PMCCNTR_EL0 */
+		idx = ARMV8_PMU_CYCLE_IDX;
+	else
+		/* PMEVCNTRn_EL0 */
+		idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
+
+	kvm_pmu_set_counter_value_user(vcpu, idx, val);
+	return 0;
+}
+
 static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
 			      struct sys_reg_params *p,
 			      const struct sys_reg_desc *r)
@@ -1166,25 +1219,10 @@ static bool access_pmu_evtyper(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 
 static int set_pmreg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, u64 val)
 {
-	bool set;
-
-	val &= kvm_pmu_accessible_counter_mask(vcpu);
-
-	switch (r->reg) {
-	case PMOVSSET_EL0:
-		/* CRm[1] being set indicates a SET register, and CLR otherwise */
-		set = r->CRm & 2;
-		break;
-	default:
-		/* Op2[0] being set indicates a SET register, and CLR otherwise */
-		set = r->Op2 & 1;
-		break;
-	}
+	u64 mask = kvm_pmu_accessible_counter_mask(vcpu);
 
-	if (set)
-		__vcpu_sys_reg(vcpu, r->reg) |= val;
-	else
-		__vcpu_sys_reg(vcpu, r->reg) &= ~val;
+	__vcpu_assign_sys_reg(vcpu, r->reg, val & mask);
+	kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
 
 	return 0;
 }
@@ -1208,16 +1246,14 @@ static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	mask = kvm_pmu_accessible_counter_mask(vcpu);
 	if (p->is_write) {
 		val = p->regval & mask;
-		if (r->Op2 & 0x1) {
+		if (r->Op2 & 0x1)
 			/* accessing PMCNTENSET_EL0 */
-			__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) |= val;
-			kvm_pmu_enable_counter_mask(vcpu, val);
-			kvm_vcpu_pmu_restore_guest(vcpu);
-		} else {
+			__vcpu_rmw_sys_reg(vcpu, PMCNTENSET_EL0, |=, val);
+		else
 			/* accessing PMCNTENCLR_EL0 */
-			__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= ~val;
-			kvm_pmu_disable_counter_mask(vcpu, val);
-		}
+			__vcpu_rmw_sys_reg(vcpu, PMCNTENSET_EL0, &=, ~val);
+
+		kvm_pmu_reprogram_counter_mask(vcpu, val);
 	} else {
 		p->regval = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
 	}
@@ -1238,10 +1274,10 @@ static bool access_pminten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 
 		if (r->Op2 & 0x1)
 			/* accessing PMINTENSET_EL1 */
-			__vcpu_sys_reg(vcpu, PMINTENSET_EL1) |= val;
+			__vcpu_rmw_sys_reg(vcpu, PMINTENSET_EL1, |=, val);
 		else
 			/* accessing PMINTENCLR_EL1 */
-			__vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= ~val;
+			__vcpu_rmw_sys_reg(vcpu, PMINTENSET_EL1, &=, ~val);
 	} else {
 		p->regval = __vcpu_sys_reg(vcpu, PMINTENSET_EL1);
 	}
@@ -1260,10 +1296,10 @@ static bool access_pmovs(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	if (p->is_write) {
 		if (r->CRm & 0x2)
 			/* accessing PMOVSSET_EL0 */
-			__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= (p->regval & mask);
+			__vcpu_rmw_sys_reg(vcpu, PMOVSSET_EL0, |=, (p->regval & mask));
 		else
 			/* accessing PMOVSCLR_EL0 */
-			__vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= ~(p->regval & mask);
+			__vcpu_rmw_sys_reg(vcpu, PMOVSSET_EL0, &=, ~(p->regval & mask));
 	} else {
 		p->regval = __vcpu_sys_reg(vcpu, PMOVSSET_EL0);
 	}
@@ -1294,8 +1330,8 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		if (!vcpu_mode_priv(vcpu))
 			return undef_access(vcpu, p, r);
 
-		__vcpu_sys_reg(vcpu, PMUSERENR_EL0) =
-			       p->regval & ARMV8_PMU_USERENR_MASK;
+		__vcpu_assign_sys_reg(vcpu, PMUSERENR_EL0,
+				      (p->regval & ARMV8_PMU_USERENR_MASK));
 	} else {
 		p->regval = __vcpu_sys_reg(vcpu, PMUSERENR_EL0)
 			    & ARMV8_PMU_USERENR_MASK;
@@ -1325,8 +1361,9 @@ static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 	 * with the existing KVM behavior.
 	 */
 	if (!kvm_vm_has_ran_once(kvm) &&
+	    !vcpu_has_nv(vcpu)	      &&
 	    new_n <= kvm_arm_pmu_get_max_counters(kvm))
-		kvm->arch.pmcr_n = new_n;
+		kvm->arch.nr_pmu_counters = new_n;
 
 	mutex_unlock(&kvm->arch.config_lock);
 
@@ -1345,20 +1382,26 @@ static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 	if (!kvm_supports_32bit_el0())
 		val |= ARMV8_PMU_PMCR_LC;
 
-	__vcpu_sys_reg(vcpu, r->reg) = val;
+	__vcpu_assign_sys_reg(vcpu, r->reg, val);
+	kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
+
 	return 0;
 }
 
 /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
 #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
 	{ SYS_DESC(SYS_DBGBVRn_EL1(n)),					\
-	  trap_bvr, reset_bvr, 0, 0, get_bvr, set_bvr },		\
+	  trap_dbg_wb_reg, reset_dbg_wb_reg, 0, 0,			\
+	  get_dbg_wb_reg, set_dbg_wb_reg },				\
 	{ SYS_DESC(SYS_DBGBCRn_EL1(n)),					\
-	  trap_bcr, reset_bcr, 0, 0, get_bcr, set_bcr },		\
+	  trap_dbg_wb_reg, reset_dbg_wb_reg, 0, 0,			\
+	  get_dbg_wb_reg, set_dbg_wb_reg },				\
 	{ SYS_DESC(SYS_DBGWVRn_EL1(n)),					\
-	  trap_wvr, reset_wvr, 0, 0,  get_wvr, set_wvr },		\
+	  trap_dbg_wb_reg, reset_dbg_wb_reg, 0, 0,			\
+	  get_dbg_wb_reg, set_dbg_wb_reg },				\
 	{ SYS_DESC(SYS_DBGWCRn_EL1(n)),					\
-	  trap_wcr, reset_wcr, 0, 0,  get_wcr, set_wcr }
+	  trap_dbg_wb_reg, reset_dbg_wb_reg, 0, 0,			\
+	  get_dbg_wb_reg, set_dbg_wb_reg }
 
 #define PMU_SYS_REG(name)						\
 	SYS_DESC(SYS_##name), .reset = reset_pmu_reg,			\
@@ -1368,6 +1411,7 @@ static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 #define PMU_PMEVCNTR_EL0(n)						\
 	{ PMU_SYS_REG(PMEVCNTRn_EL0(n)),				\
 	  .reset = reset_pmevcntr, .get_user = get_pmu_evcntr,		\
+	  .set_user = set_pmu_evcntr,					\
 	  .access = access_pmu_evcntr, .reg = (PMEVCNTR0_EL0 + n), }
 
 /* Macro to expand the PMEVTYPERn_EL0 register */
@@ -1412,26 +1456,146 @@ static bool access_arch_timer(struct kvm_vcpu *vcpu,
 
 	switch (reg) {
 	case SYS_CNTP_TVAL_EL0:
+		if (is_hyp_ctxt(vcpu) && vcpu_el2_e2h_is_set(vcpu))
+			tmr = TIMER_HPTIMER;
+		else
+			tmr = TIMER_PTIMER;
+		treg = TIMER_REG_TVAL;
+		break;
+
+	case SYS_CNTV_TVAL_EL0:
+		if (is_hyp_ctxt(vcpu) && vcpu_el2_e2h_is_set(vcpu))
+			tmr = TIMER_HVTIMER;
+		else
+			tmr = TIMER_VTIMER;
+		treg = TIMER_REG_TVAL;
+		break;
+
 	case SYS_AARCH32_CNTP_TVAL:
+	case SYS_CNTP_TVAL_EL02:
 		tmr = TIMER_PTIMER;
 		treg = TIMER_REG_TVAL;
 		break;
+
+	case SYS_CNTV_TVAL_EL02:
+		tmr = TIMER_VTIMER;
+		treg = TIMER_REG_TVAL;
+		break;
+
+	case SYS_CNTHP_TVAL_EL2:
+		tmr = TIMER_HPTIMER;
+		treg = TIMER_REG_TVAL;
+		break;
+
+	case SYS_CNTHV_TVAL_EL2:
+		tmr = TIMER_HVTIMER;
+		treg = TIMER_REG_TVAL;
+		break;
+
 	case SYS_CNTP_CTL_EL0:
+		if (is_hyp_ctxt(vcpu) && vcpu_el2_e2h_is_set(vcpu))
+			tmr = TIMER_HPTIMER;
+		else
+			tmr = TIMER_PTIMER;
+		treg = TIMER_REG_CTL;
+		break;
+
+	case SYS_CNTV_CTL_EL0:
+		if (is_hyp_ctxt(vcpu) && vcpu_el2_e2h_is_set(vcpu))
+			tmr = TIMER_HVTIMER;
+		else
+			tmr = TIMER_VTIMER;
+		treg = TIMER_REG_CTL;
+		break;
+
 	case SYS_AARCH32_CNTP_CTL:
+	case SYS_CNTP_CTL_EL02:
 		tmr = TIMER_PTIMER;
 		treg = TIMER_REG_CTL;
 		break;
+
+	case SYS_CNTV_CTL_EL02:
+		tmr = TIMER_VTIMER;
+		treg = TIMER_REG_CTL;
+		break;
+
+	case SYS_CNTHP_CTL_EL2:
+		tmr = TIMER_HPTIMER;
+		treg = TIMER_REG_CTL;
+		break;
+
+	case SYS_CNTHV_CTL_EL2:
+		tmr = TIMER_HVTIMER;
+		treg = TIMER_REG_CTL;
+		break;
+
 	case SYS_CNTP_CVAL_EL0:
+		if (is_hyp_ctxt(vcpu) && vcpu_el2_e2h_is_set(vcpu))
+			tmr = TIMER_HPTIMER;
+		else
+			tmr = TIMER_PTIMER;
+		treg = TIMER_REG_CVAL;
+		break;
+
+	case SYS_CNTV_CVAL_EL0:
+		if (is_hyp_ctxt(vcpu) && vcpu_el2_e2h_is_set(vcpu))
+			tmr = TIMER_HVTIMER;
+		else
+			tmr = TIMER_VTIMER;
+		treg = TIMER_REG_CVAL;
+		break;
+
 	case SYS_AARCH32_CNTP_CVAL:
+	case SYS_CNTP_CVAL_EL02:
 		tmr = TIMER_PTIMER;
 		treg = TIMER_REG_CVAL;
 		break;
+
+	case SYS_CNTV_CVAL_EL02:
+		tmr = TIMER_VTIMER;
+		treg = TIMER_REG_CVAL;
+		break;
+
+	case SYS_CNTHP_CVAL_EL2:
+		tmr = TIMER_HPTIMER;
+		treg = TIMER_REG_CVAL;
+		break;
+
+	case SYS_CNTHV_CVAL_EL2:
+		tmr = TIMER_HVTIMER;
+		treg = TIMER_REG_CVAL;
+		break;
+
 	case SYS_CNTPCT_EL0:
 	case SYS_CNTPCTSS_EL0:
+		if (is_hyp_ctxt(vcpu))
+			tmr = TIMER_HPTIMER;
+		else
+			tmr = TIMER_PTIMER;
+		treg = TIMER_REG_CNT;
+		break;
+
 	case SYS_AARCH32_CNTPCT:
+	case SYS_AARCH32_CNTPCTSS:
 		tmr = TIMER_PTIMER;
 		treg = TIMER_REG_CNT;
 		break;
+
+	case SYS_CNTVCT_EL0:
+	case SYS_CNTVCTSS_EL0:
+		if (is_hyp_ctxt(vcpu))
+			tmr = TIMER_HVTIMER;
+		else
+			tmr = TIMER_VTIMER;
+		treg = TIMER_REG_CNT;
+		break;
+
+	case SYS_AARCH32_CNTVCT:
+	case SYS_AARCH32_CNTVCTSS:
+		tmr = TIMER_VTIMER;
+		treg = TIMER_REG_CNT;
+		break;
+
 	default:
 		print_sys_reg_msg(p, "%s", "Unhandled trapped timer register");
 		return undef_access(vcpu, p, r);
@@ -1445,6 +1609,49 @@ static bool access_arch_timer(struct kvm_vcpu *vcpu,
 	return true;
 }
 
+static int arch_timer_set_user(struct kvm_vcpu *vcpu,
+			       const struct sys_reg_desc *rd,
+			       u64 val)
+{
+	switch (reg_to_encoding(rd)) {
+	case SYS_CNTV_CTL_EL0:
+	case SYS_CNTP_CTL_EL0:
+	case SYS_CNTHV_CTL_EL2:
+	case SYS_CNTHP_CTL_EL2:
+		val &= ~ARCH_TIMER_CTRL_IT_STAT;
+		break;
+	case SYS_CNTVCT_EL0:
+		if (!test_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET, &vcpu->kvm->arch.flags))
+			timer_set_offset(vcpu_vtimer(vcpu), kvm_phys_timer_read() - val);
+		return 0;
+	case SYS_CNTPCT_EL0:
+		if (!test_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET, &vcpu->kvm->arch.flags))
+			timer_set_offset(vcpu_ptimer(vcpu), kvm_phys_timer_read() - val);
+		return 0;
+	}
+
+	__vcpu_assign_sys_reg(vcpu, rd->reg, val);
+	return 0;
+}
+
+static int arch_timer_get_user(struct kvm_vcpu *vcpu,
+			       const struct sys_reg_desc *rd,
+			       u64 *val)
+{
+	switch (reg_to_encoding(rd)) {
+	case SYS_CNTVCT_EL0:
+		*val = kvm_phys_timer_read() - timer_get_offset(vcpu_vtimer(vcpu));
+		break;
+	case SYS_CNTPCT_EL0:
+		*val = kvm_phys_timer_read() - timer_get_offset(vcpu_ptimer(vcpu));
+		break;
+	default:
+		*val = __vcpu_sys_reg(vcpu, rd->reg);
+	}
+
+	return 0;
+}
+
 static s64 kvm_arm64_ftr_safe_value(u32 id, const struct arm64_ftr_bits *ftrp,
 				    s64 new, s64 cur)
 {
@@ -1550,6 +1757,7 @@ static u8 pmuver_to_perfmon(u8 pmuver)
 }
 
 static u64 sanitise_id_aa64pfr0_el1(const struct kvm_vcpu *vcpu, u64 val);
+static u64 sanitise_id_aa64pfr1_el1(const struct kvm_vcpu *vcpu, u64 val);
 static u64 sanitise_id_aa64dfr0_el1(const struct kvm_vcpu *vcpu, u64 val);
 
 /* Read a sanitised cpufeature ID register by sys_reg_desc */
@@ -1572,50 +1780,51 @@ static u64 __kvm_read_sanitised_id_reg(const struct kvm_vcpu *vcpu,
 		val = sanitise_id_aa64pfr0_el1(vcpu, val);
 		break;
 	case SYS_ID_AA64PFR1_EL1:
-		if (!kvm_has_mte(vcpu->kvm))
-			val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE);
-
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SME);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_RNDR_trap);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_NMI);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE_frac);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_GCS);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_THE);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTEX);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_DF2);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_PFAR);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MPAM_frac);
+		val = sanitise_id_aa64pfr1_el1(vcpu, val);
 		break;
 	case SYS_ID_AA64PFR2_EL1:
-		/* We only expose FPMR */
-		val &= ID_AA64PFR2_EL1_FPMR;
+		val &= ID_AA64PFR2_EL1_FPMR |
+			(kvm_has_mte(vcpu->kvm) ?
+			 ID_AA64PFR2_EL1_MTEFAR | ID_AA64PFR2_EL1_MTESTOREONLY :
+			 0);
 		break;
 	case SYS_ID_AA64ISAR1_EL1:
 		if (!vcpu_has_ptrauth(vcpu))
-			val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) |
-				 ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) |
-				 ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA) |
-				 ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI));
+			val &= ~(ID_AA64ISAR1_EL1_APA |
+				 ID_AA64ISAR1_EL1_API |
+				 ID_AA64ISAR1_EL1_GPA |
+				 ID_AA64ISAR1_EL1_GPI);
 		break;
 	case SYS_ID_AA64ISAR2_EL1:
 		if (!vcpu_has_ptrauth(vcpu))
-			val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) |
-				 ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3));
-		if (!cpus_have_final_cap(ARM64_HAS_WFXT))
-			val &= ~ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_WFxT);
+			val &= ~(ID_AA64ISAR2_EL1_APA3 |
+				 ID_AA64ISAR2_EL1_GPA3);
+		if (!cpus_have_final_cap(ARM64_HAS_WFXT) ||
+		    has_broken_cntvoff())
+			val &= ~ID_AA64ISAR2_EL1_WFxT;
+		break;
+	case SYS_ID_AA64ISAR3_EL1:
+		val &= ID_AA64ISAR3_EL1_FPRCVT | ID_AA64ISAR3_EL1_LSFE |
+			ID_AA64ISAR3_EL1_FAMINMAX;
 		break;
 	case SYS_ID_AA64MMFR2_EL1:
 		val &= ~ID_AA64MMFR2_EL1_CCIDX_MASK;
+		val &= ~ID_AA64MMFR2_EL1_NV;
 		break;
 	case SYS_ID_AA64MMFR3_EL1:
-		val &= ID_AA64MMFR3_EL1_TCRX | ID_AA64MMFR3_EL1_S1POE |
-			ID_AA64MMFR3_EL1_S1PIE;
+		val &= ID_AA64MMFR3_EL1_TCRX |
+		       ID_AA64MMFR3_EL1_SCTLRX |
+		       ID_AA64MMFR3_EL1_S1POE |
+		       ID_AA64MMFR3_EL1_S1PIE;
 		break;
 	case SYS_ID_MMFR4_EL1:
-		val &= ~ARM64_FEATURE_MASK(ID_MMFR4_EL1_CCIDX);
+		val &= ~ID_MMFR4_EL1_CCIDX;
 		break;
 	}
 
+	if (vcpu_has_nv(vcpu))
+		val = limit_nv_id_reg(vcpu->kvm, id, val);
+
 	return val;
 }
 
@@ -1642,15 +1851,24 @@ static bool is_feature_id_reg(u32 encoding)
  * Return true if the register's (Op0, Op1, CRn, CRm, Op2) is
  * (3, 0, 0, crm, op2), where 1<=crm<8, 0<=op2<8, which is the range of ID
  * registers KVM maintains on a per-VM basis.
+ *
+ * Additionally, the implementation ID registers and CTR_EL0 are handled as
+ * per-VM registers.
  */
 static inline bool is_vm_ftr_id_reg(u32 id)
 {
-	if (id == SYS_CTR_EL0)
+	switch (id) {
+	case SYS_CTR_EL0:
+	case SYS_MIDR_EL1:
+	case SYS_REVIDR_EL1:
+	case SYS_AIDR_EL1:
 		return true;
+	default:
+		return (sys_reg_Op0(id) == 3 && sys_reg_Op1(id) == 0 &&
+			sys_reg_CRn(id) == 0 && sys_reg_CRm(id) >= 1 &&
+			sys_reg_CRm(id) < 8);
 
-	return (sys_reg_Op0(id) == 3 && sys_reg_Op1(id) == 0 &&
-		sys_reg_CRn(id) == 0 && sys_reg_CRm(id) >= 1 &&
-		sys_reg_CRm(id) < 8);
+	}
 }
 
 static inline bool is_vcpu_ftr_id_reg(u32 id)
@@ -1764,7 +1982,7 @@ static u64 sanitise_id_aa64pfr0_el1(const struct kvm_vcpu *vcpu, u64 val)
 		val |= SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, CSV3, IMP);
 	}
 
-	if (kvm_vgic_global_state.type == VGIC_V3) {
+	if (vgic_is_v3(vcpu->kvm)) {
 		val &= ~ID_AA64PFR0_EL1_GIC_MASK;
 		val |= SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, GIC, IMP);
 	}
@@ -1781,15 +1999,30 @@ static u64 sanitise_id_aa64pfr0_el1(const struct kvm_vcpu *vcpu, u64 val)
 	return val;
 }
 
-#define ID_REG_LIMIT_FIELD_ENUM(val, reg, field, limit)			       \
-({									       \
-	u64 __f_val = FIELD_GET(reg##_##field##_MASK, val);		       \
-	(val) &= ~reg##_##field##_MASK;					       \
-	(val) |= FIELD_PREP(reg##_##field##_MASK,			       \
-			    min(__f_val,				       \
-				(u64)SYS_FIELD_VALUE(reg, field, limit)));     \
-	(val);								       \
-})
+static u64 sanitise_id_aa64pfr1_el1(const struct kvm_vcpu *vcpu, u64 val)
+{
+	u64 pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	if (!kvm_has_mte(vcpu->kvm)) {
+		val &= ~ID_AA64PFR1_EL1_MTE;
+		val &= ~ID_AA64PFR1_EL1_MTE_frac;
+	}
+
+	if (!(cpus_have_final_cap(ARM64_HAS_RASV1P1_EXTN) &&
+	      SYS_FIELD_GET(ID_AA64PFR0_EL1, RAS, pfr0) == ID_AA64PFR0_EL1_RAS_IMP))
+		val &= ~ID_AA64PFR1_EL1_RAS_frac;
+
+	val &= ~ID_AA64PFR1_EL1_SME;
+	val &= ~ID_AA64PFR1_EL1_RNDR_trap;
+	val &= ~ID_AA64PFR1_EL1_NMI;
+	val &= ~ID_AA64PFR1_EL1_GCS;
+	val &= ~ID_AA64PFR1_EL1_THE;
+	val &= ~ID_AA64PFR1_EL1_MTEX;
+	val &= ~ID_AA64PFR1_EL1_PFAR;
+	val &= ~ID_AA64PFR1_EL1_MPAM_frac;
+
+	return val;
+}
 
 static u64 sanitise_id_aa64dfr0_el1(const struct kvm_vcpu *vcpu, u64 val)
 {
@@ -1806,9 +2039,32 @@ static u64 sanitise_id_aa64dfr0_el1(const struct kvm_vcpu *vcpu, u64 val)
 	/* Hide SPE from guests */
 	val &= ~ID_AA64DFR0_EL1_PMSVer_MASK;
 
+	/* Hide BRBE from guests */
+	val &= ~ID_AA64DFR0_EL1_BRBE_MASK;
+
 	return val;
 }
 
+/*
+ * Older versions of KVM erroneously claim support for FEAT_DoubleLock with
+ * NV-enabled VMs on unsupporting hardware. Silently ignore the incorrect
+ * value if it is consistent with the bug.
+ */
+static bool ignore_feat_doublelock(struct kvm_vcpu *vcpu, u64 val)
+{
+	u8 host, user;
+
+	if (!vcpu_has_nv(vcpu))
+		return false;
+
+	host = SYS_FIELD_GET(ID_AA64DFR0_EL1, DoubleLock,
+			     read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1));
+	user = SYS_FIELD_GET(ID_AA64DFR0_EL1, DoubleLock, val);
+
+	return host == ID_AA64DFR0_EL1_DoubleLock_NI &&
+	       user == ID_AA64DFR0_EL1_DoubleLock_IMP;
+}
+
 static int set_id_aa64dfr0_el1(struct kvm_vcpu *vcpu,
 			       const struct sys_reg_desc *rd,
 			       u64 val)
@@ -1840,18 +2096,25 @@ static int set_id_aa64dfr0_el1(struct kvm_vcpu *vcpu,
 	if (debugver < ID_AA64DFR0_EL1_DebugVer_IMP)
 		return -EINVAL;
 
+	if (ignore_feat_doublelock(vcpu, val)) {
+		val &= ~ID_AA64DFR0_EL1_DoubleLock;
+		val |= SYS_FIELD_PREP_ENUM(ID_AA64DFR0_EL1, DoubleLock, NI);
+	}
+
 	return set_id_reg(vcpu, rd, val);
 }
 
 static u64 read_sanitised_id_dfr0_el1(struct kvm_vcpu *vcpu,
 				      const struct sys_reg_desc *rd)
 {
-	u8 perfmon = pmuver_to_perfmon(kvm_arm_pmu_get_pmuver_limit());
+	u8 perfmon;
 	u64 val = read_sanitised_ftr_reg(SYS_ID_DFR0_EL1);
 
 	val &= ~ID_DFR0_EL1_PerfMon_MASK;
-	if (kvm_vcpu_has_pmu(vcpu))
+	if (kvm_vcpu_has_pmu(vcpu)) {
+		perfmon = pmuver_to_perfmon(kvm_arm_pmu_get_pmuver_limit());
 		val |= SYS_FIELD_PREP(ID_DFR0_EL1, PerfMon, perfmon);
+	}
 
 	val = ID_REG_LIMIT_FIELD_ENUM(val, ID_DFR0_EL1, CopDbg, Debugv8p8);
 
@@ -1905,6 +2168,20 @@ static int set_id_aa64pfr0_el1(struct kvm_vcpu *vcpu,
 	if ((hw_val & mpam_mask) == (user_val & mpam_mask))
 		user_val &= ~ID_AA64PFR0_EL1_MPAM_MASK;
 
+	/* Fail the guest's request to disable the AA64 ISA at EL{0,1,2} */
+	if (!FIELD_GET(ID_AA64PFR0_EL1_EL0, user_val) ||
+	    !FIELD_GET(ID_AA64PFR0_EL1_EL1, user_val) ||
+	    (vcpu_has_nv(vcpu) && !FIELD_GET(ID_AA64PFR0_EL1_EL2, user_val)))
+		return -EINVAL;
+
+	/*
+	 * If we are running on a GICv5 host and support FEAT_GCIE_LEGACY, then
+	 * we support GICv3. Fail attempts to do anything but set that to IMP.
+	 */
+	if (vgic_is_v3_compat(vcpu->kvm) &&
+	    FIELD_GET(ID_AA64PFR0_EL1_GIC_MASK, user_val) != ID_AA64PFR0_EL1_GIC_IMP)
+		return -EINVAL;
+
 	return set_id_reg(vcpu, rd, user_val);
 }
 
@@ -1913,11 +2190,78 @@ static int set_id_aa64pfr1_el1(struct kvm_vcpu *vcpu,
 {
 	u64 hw_val = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1);
 	u64 mpam_mask = ID_AA64PFR1_EL1_MPAM_frac_MASK;
+	u8 mte = SYS_FIELD_GET(ID_AA64PFR1_EL1, MTE, hw_val);
+	u8 user_mte_frac = SYS_FIELD_GET(ID_AA64PFR1_EL1, MTE_frac, user_val);
+	u8 hw_mte_frac = SYS_FIELD_GET(ID_AA64PFR1_EL1, MTE_frac, hw_val);
 
 	/* See set_id_aa64pfr0_el1 for comment about MPAM */
 	if ((hw_val & mpam_mask) == (user_val & mpam_mask))
 		user_val &= ~ID_AA64PFR1_EL1_MPAM_frac_MASK;
 
+	/*
+	 * Previously MTE_frac was hidden from guest. However, if the
+	 * hardware supports MTE2 but not MTE_ASYM_FAULT then a value
+	 * of 0 for this field indicates that the hardware supports
+	 * MTE_ASYNC. Whereas, 0xf indicates MTE_ASYNC is not supported.
+	 *
+	 * As KVM must accept values from KVM provided by user-space,
+	 * when ID_AA64PFR1_EL1.MTE is 2 allow user-space to set
+	 * ID_AA64PFR1_EL1.MTE_frac to 0. However, ignore it to avoid
+	 * incorrectly claiming hardware support for MTE_ASYNC in the
+	 * guest.
+	 */
+
+	if (mte == ID_AA64PFR1_EL1_MTE_MTE2 &&
+	    hw_mte_frac == ID_AA64PFR1_EL1_MTE_frac_NI &&
+	    user_mte_frac == ID_AA64PFR1_EL1_MTE_frac_ASYNC) {
+		user_val &= ~ID_AA64PFR1_EL1_MTE_frac_MASK;
+		user_val |= hw_val & ID_AA64PFR1_EL1_MTE_frac_MASK;
+	}
+
+	return set_id_reg(vcpu, rd, user_val);
+}
+
+/*
+ * Allow userspace to de-feature a stage-2 translation granule but prevent it
+ * from claiming the impossible.
+ */
+#define tgran2_val_allowed(tg, safe, user)			\
+({								\
+	u8 __s = SYS_FIELD_GET(ID_AA64MMFR0_EL1, tg, safe);	\
+	u8 __u = SYS_FIELD_GET(ID_AA64MMFR0_EL1, tg, user);	\
+								\
+	__s == __u || __u == ID_AA64MMFR0_EL1_##tg##_NI;	\
+})
+
+static int set_id_aa64mmfr0_el1(struct kvm_vcpu *vcpu,
+				const struct sys_reg_desc *rd, u64 user_val)
+{
+	u64 sanitized_val = kvm_read_sanitised_id_reg(vcpu, rd);
+
+	if (!vcpu_has_nv(vcpu))
+		return set_id_reg(vcpu, rd, user_val);
+
+	if (!tgran2_val_allowed(TGRAN4_2, sanitized_val, user_val) ||
+	    !tgran2_val_allowed(TGRAN16_2, sanitized_val, user_val) ||
+	    !tgran2_val_allowed(TGRAN64_2, sanitized_val, user_val))
+		return -EINVAL;
+
+	return set_id_reg(vcpu, rd, user_val);
+}
+
+static int set_id_aa64mmfr2_el1(struct kvm_vcpu *vcpu,
+				const struct sys_reg_desc *rd, u64 user_val)
+{
+	u64 hw_val = read_sanitised_ftr_reg(SYS_ID_AA64MMFR2_EL1);
+	u64 nv_mask = ID_AA64MMFR2_EL1_NV_MASK;
+
+	/*
+	 * We made the mistake to expose the now deprecated NV field,
+	 * so allow userspace to write it, but silently ignore it.
+	 */
+	if ((hw_val & nv_mask) == (user_val & nv_mask))
+		user_val &= ~nv_mask;
+
 	return set_id_reg(vcpu, rd, user_val);
 }
 
@@ -2111,7 +2455,7 @@ static u64 reset_clidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	if (kvm_has_mte(vcpu->kvm))
 		clidr |= 2ULL << CLIDR_TTYPE_SHIFT(loc);
 
-	__vcpu_sys_reg(vcpu, r->reg) = clidr;
+	__vcpu_assign_sys_reg(vcpu, r->reg, clidr);
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -2125,7 +2469,7 @@ static int set_clidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	if ((val & CLIDR_EL1_RES0) || (!(ctr_el0 & CTR_EL0_IDC) && idc))
 		return -EINVAL;
 
-	__vcpu_sys_reg(vcpu, rd->reg) = val;
+	__vcpu_assign_sys_reg(vcpu, rd->reg, val);
 
 	return 0;
 }
@@ -2210,27 +2554,34 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu,
 			"trap of EL2 register redirected to EL1");
 }
 
-#define EL2_REG(name, acc, rst, v) {		\
-	SYS_DESC(SYS_##name),			\
-	.access = acc,				\
-	.reset = rst,				\
-	.reg = name,				\
-	.visibility = el2_visibility,		\
-	.val = v,				\
-}
-
-#define EL2_REG_FILTERED(name, acc, rst, v, filter) {	\
+#define SYS_REG_USER_FILTER(name, acc, rst, v, gu, su, filter) { \
 	SYS_DESC(SYS_##name),			\
 	.access = acc,				\
 	.reset = rst,				\
 	.reg = name,				\
+	.get_user = gu,				\
+	.set_user = su,				\
 	.visibility = filter,			\
 	.val = v,				\
 }
 
+#define EL2_REG_FILTERED(name, acc, rst, v, filter)	\
+	SYS_REG_USER_FILTER(name, acc, rst, v, NULL, NULL, filter)
+
+#define EL2_REG(name, acc, rst, v)			\
+	EL2_REG_FILTERED(name, acc, rst, v, el2_visibility)
+
 #define EL2_REG_VNCR(name, rst, v)	EL2_REG(name, bad_vncr_trap, rst, v)
+#define EL2_REG_VNCR_FILT(name, vis)			\
+	EL2_REG_FILTERED(name, bad_vncr_trap, reset_val, 0, vis)
+#define EL2_REG_VNCR_GICv3(name)			\
+	EL2_REG_VNCR_FILT(name, hidden_visibility)
 #define EL2_REG_REDIR(name, rst, v)	EL2_REG(name, bad_redir_trap, rst, v)
 
+#define TIMER_REG(name, vis)					   \
+	SYS_REG_USER_FILTER(name, access_arch_timer, reset_val, 0, \
+			    arch_timer_get_user, arch_timer_set_user, vis)
+
 /*
  * Since reset() callback and field val are not used for idregs, they will be
  * used for specific purposes for idregs.
@@ -2242,44 +2593,44 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu,
  * from userspace.
  */
 
-#define ID_DESC(name)				\
-	SYS_DESC(SYS_##name),			\
+#define ID_DESC_DEFAULT_CALLBACKS		\
 	.access	= access_id_reg,		\
-	.get_user = get_id_reg			\
-
-/* sys_reg_desc initialiser for known cpufeature ID registers */
-#define ID_SANITISED(name) {			\
-	ID_DESC(name),				\
+	.get_user = get_id_reg,			\
 	.set_user = set_id_reg,			\
 	.visibility = id_visibility,		\
-	.reset = kvm_read_sanitised_id_reg,	\
-	.val = 0,				\
-}
+	.reset = kvm_read_sanitised_id_reg
+
+#define ID_DESC(name)				\
+	SYS_DESC(SYS_##name),			\
+	ID_DESC_DEFAULT_CALLBACKS
 
 /* sys_reg_desc initialiser for known cpufeature ID registers */
-#define AA32_ID_SANITISED(name) {		\
+#define ID_SANITISED(name) {			\
 	ID_DESC(name),				\
-	.set_user = set_id_reg,			\
-	.visibility = aa32_id_visibility,	\
-	.reset = kvm_read_sanitised_id_reg,	\
 	.val = 0,				\
 }
 
 /* sys_reg_desc initialiser for writable ID registers */
 #define ID_WRITABLE(name, mask) {		\
 	ID_DESC(name),				\
-	.set_user = set_id_reg,			\
-	.visibility = id_visibility,		\
-	.reset = kvm_read_sanitised_id_reg,	\
 	.val = mask,				\
 }
 
+/*
+ * 32bit ID regs are fully writable when the guest is 32bit
+ * capable. Nothing in the KVM code should rely on 32bit features
+ * anyway, only 64bit, so let the VMM do its worse.
+ */
+#define AA32_ID_WRITABLE(name) {		\
+	ID_DESC(name),				\
+	.visibility = aa32_id_visibility,	\
+	.val = GENMASK(31, 0),			\
+}
+
 /* sys_reg_desc initialiser for cpufeature ID registers that need filtering */
 #define ID_FILTERED(sysreg, name, mask) {	\
 	ID_DESC(sysreg),				\
 	.set_user = set_##name,				\
-	.visibility = id_visibility,			\
-	.reset = kvm_read_sanitised_id_reg,		\
 	.val = (mask),					\
 }
 
@@ -2289,12 +2640,10 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu,
  * (1 <= crm < 8, 0 <= Op2 < 8).
  */
 #define ID_UNALLOCATED(crm, op2) {			\
+	.name = "S3_0_0_" #crm "_" #op2,		\
 	Op0(3), Op1(0), CRn(0), CRm(crm), Op2(op2),	\
-	.access = access_id_reg,			\
-	.get_user = get_id_reg,				\
-	.set_user = set_id_reg,				\
+	ID_DESC_DEFAULT_CALLBACKS,			\
 	.visibility = raz_visibility,			\
-	.reset = kvm_read_sanitised_id_reg,		\
 	.val = 0,					\
 }
 
@@ -2305,9 +2654,7 @@ static bool bad_redir_trap(struct kvm_vcpu *vcpu,
  */
 #define ID_HIDDEN(name) {			\
 	ID_DESC(name),				\
-	.set_user = set_id_reg,			\
 	.visibility = raz_visibility,		\
-	.reset = kvm_read_sanitised_id_reg,	\
 	.val = 0,				\
 }
 
@@ -2316,7 +2663,7 @@ static bool access_sp_el1(struct kvm_vcpu *vcpu,
 			  const struct sys_reg_desc *r)
 {
 	if (p->is_write)
-		__vcpu_sys_reg(vcpu, SP_EL1) = p->regval;
+		__vcpu_assign_sys_reg(vcpu, SP_EL1, p->regval);
 	else
 		p->regval = __vcpu_sys_reg(vcpu, SP_EL1);
 
@@ -2340,7 +2687,7 @@ static bool access_spsr(struct kvm_vcpu *vcpu,
 			const struct sys_reg_desc *r)
 {
 	if (p->is_write)
-		__vcpu_sys_reg(vcpu, SPSR_EL1) = p->regval;
+		__vcpu_assign_sys_reg(vcpu, SPSR_EL1, p->regval);
 	else
 		p->regval = __vcpu_sys_reg(vcpu, SPSR_EL1);
 
@@ -2352,7 +2699,7 @@ static bool access_cntkctl_el12(struct kvm_vcpu *vcpu,
 				const struct sys_reg_desc *r)
 {
 	if (p->is_write)
-		__vcpu_sys_reg(vcpu, CNTKCTL_EL1) = p->regval;
+		__vcpu_assign_sys_reg(vcpu, CNTKCTL_EL1, p->regval);
 	else
 		p->regval = __vcpu_sys_reg(vcpu, CNTKCTL_EL1);
 
@@ -2366,7 +2713,9 @@ static u64 reset_hcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	if (!cpus_have_final_cap(ARM64_HAS_HCR_NV1))
 		val |= HCR_E2H;
 
-	return __vcpu_sys_reg(vcpu, r->reg) = val;
+	__vcpu_assign_sys_reg(vcpu, r->reg, val);
+
+	return __vcpu_sys_reg(vcpu, r->reg);
 }
 
 static unsigned int __el2_visibility(const struct kvm_vcpu *vcpu,
@@ -2383,6 +2732,31 @@ static unsigned int sve_el2_visibility(const struct kvm_vcpu *vcpu,
 	return __el2_visibility(vcpu, rd, sve_visibility);
 }
 
+static unsigned int vncr_el2_visibility(const struct kvm_vcpu *vcpu,
+					const struct sys_reg_desc *rd)
+{
+	if (el2_visibility(vcpu, rd) == 0 &&
+	    kvm_has_feat(vcpu->kvm, ID_AA64MMFR4_EL1, NV_frac, NV2_ONLY))
+		return 0;
+
+	return REG_HIDDEN;
+}
+
+static unsigned int sctlr2_visibility(const struct kvm_vcpu *vcpu,
+				      const struct sys_reg_desc *rd)
+{
+	if (kvm_has_sctlr2(vcpu->kvm))
+		return 0;
+
+	return REG_HIDDEN;
+}
+
+static unsigned int sctlr2_el2_visibility(const struct kvm_vcpu *vcpu,
+					  const struct sys_reg_desc *rd)
+{
+	return __el2_visibility(vcpu, rd, sctlr2_visibility);
+}
+
 static bool access_zcr_el2(struct kvm_vcpu *vcpu,
 			   struct sys_reg_params *p,
 			   const struct sys_reg_desc *r)
@@ -2391,17 +2765,65 @@ static bool access_zcr_el2(struct kvm_vcpu *vcpu,
 
 	if (guest_hyp_sve_traps_enabled(vcpu)) {
 		kvm_inject_nested_sve_trap(vcpu);
-		return true;
+		return false;
 	}
 
 	if (!p->is_write) {
-		p->regval = vcpu_read_sys_reg(vcpu, ZCR_EL2);
+		p->regval = __vcpu_sys_reg(vcpu, ZCR_EL2);
 		return true;
 	}
 
 	vq = SYS_FIELD_GET(ZCR_ELx, LEN, p->regval) + 1;
 	vq = min(vq, vcpu_sve_max_vq(vcpu));
-	vcpu_write_sys_reg(vcpu, vq - 1, ZCR_EL2);
+	__vcpu_assign_sys_reg(vcpu, ZCR_EL2, vq - 1);
+	return true;
+}
+
+static bool access_gic_vtr(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return write_to_read_only(vcpu, p, r);
+
+	p->regval = kvm_get_guest_vtr_el2();
+
+	return true;
+}
+
+static bool access_gic_misr(struct kvm_vcpu *vcpu,
+			    struct sys_reg_params *p,
+			    const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return write_to_read_only(vcpu, p, r);
+
+	p->regval = vgic_v3_get_misr(vcpu);
+
+	return true;
+}
+
+static bool access_gic_eisr(struct kvm_vcpu *vcpu,
+			    struct sys_reg_params *p,
+			    const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return write_to_read_only(vcpu, p, r);
+
+	p->regval = vgic_v3_get_eisr(vcpu);
+
+	return true;
+}
+
+static bool access_gic_elrsr(struct kvm_vcpu *vcpu,
+			     struct sys_reg_params *p,
+			     const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return write_to_read_only(vcpu, p, r);
+
+	p->regval = vgic_v3_get_elrsr(vcpu);
+
 	return true;
 }
 
@@ -2435,6 +2857,26 @@ static unsigned int tcr2_el2_visibility(const struct kvm_vcpu *vcpu,
 	return __el2_visibility(vcpu, rd, tcr2_visibility);
 }
 
+static unsigned int fgt2_visibility(const struct kvm_vcpu *vcpu,
+				    const struct sys_reg_desc *rd)
+{
+	if (el2_visibility(vcpu, rd) == 0 &&
+	    kvm_has_feat(vcpu->kvm, ID_AA64MMFR0_EL1, FGT, FGT2))
+		return 0;
+
+	return REG_HIDDEN;
+}
+
+static unsigned int fgt_visibility(const struct kvm_vcpu *vcpu,
+				   const struct sys_reg_desc *rd)
+{
+	if (el2_visibility(vcpu, rd) == 0 &&
+	    kvm_has_feat(vcpu->kvm, ID_AA64MMFR0_EL1, FGT, IMP))
+		return 0;
+
+	return REG_HIDDEN;
+}
+
 static unsigned int s1pie_visibility(const struct kvm_vcpu *vcpu,
 				     const struct sys_reg_desc *rd)
 {
@@ -2450,6 +2892,202 @@ static unsigned int s1pie_el2_visibility(const struct kvm_vcpu *vcpu,
 	return __el2_visibility(vcpu, rd, s1pie_visibility);
 }
 
+static unsigned int cnthv_visibility(const struct kvm_vcpu *vcpu,
+				     const struct sys_reg_desc *rd)
+{
+	if (vcpu_has_nv(vcpu) &&
+	    !vcpu_has_feature(vcpu, KVM_ARM_VCPU_HAS_EL2_E2H0))
+		return 0;
+
+	return REG_HIDDEN;
+}
+
+static bool access_mdcr(struct kvm_vcpu *vcpu,
+			struct sys_reg_params *p,
+			const struct sys_reg_desc *r)
+{
+	u64 hpmn, val, old = __vcpu_sys_reg(vcpu, MDCR_EL2);
+
+	if (!p->is_write) {
+		p->regval = old;
+		return true;
+	}
+
+	val = p->regval;
+	hpmn = FIELD_GET(MDCR_EL2_HPMN, val);
+
+	/*
+	 * If HPMN is out of bounds, limit it to what we actually
+	 * support. This matches the UNKNOWN definition of the field
+	 * in that case, and keeps the emulation simple. Sort of.
+	 */
+	if (hpmn > vcpu->kvm->arch.nr_pmu_counters) {
+		hpmn = vcpu->kvm->arch.nr_pmu_counters;
+		u64p_replace_bits(&val, hpmn, MDCR_EL2_HPMN);
+	}
+
+	__vcpu_assign_sys_reg(vcpu, MDCR_EL2, val);
+
+	/*
+	 * Request a reload of the PMU to enable/disable the counters
+	 * affected by HPME.
+	 */
+	if ((old ^ val) & MDCR_EL2_HPME)
+		kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
+
+	return true;
+}
+
+static bool access_ras(struct kvm_vcpu *vcpu,
+		       struct sys_reg_params *p,
+		       const struct sys_reg_desc *r)
+{
+	struct kvm *kvm = vcpu->kvm;
+
+	switch(reg_to_encoding(r)) {
+	case SYS_ERXPFGCDN_EL1:
+	case SYS_ERXPFGCTL_EL1:
+	case SYS_ERXPFGF_EL1:
+	case SYS_ERXMISC2_EL1:
+	case SYS_ERXMISC3_EL1:
+		if (!(kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, V1P1) ||
+		      (kvm_has_feat_enum(kvm, ID_AA64PFR0_EL1, RAS, IMP) &&
+		       kvm_has_feat(kvm, ID_AA64PFR1_EL1, RAS_frac, RASv1p1)))) {
+			kvm_inject_undefined(vcpu);
+			return false;
+		}
+		break;
+	default:
+		if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, IMP)) {
+			kvm_inject_undefined(vcpu);
+			return false;
+		}
+	}
+
+	return trap_raz_wi(vcpu, p, r);
+}
+
+/*
+ * For historical (ahem ABI) reasons, KVM treated MIDR_EL1, REVIDR_EL1, and
+ * AIDR_EL1 as "invariant" registers, meaning userspace cannot change them.
+ * The values made visible to userspace were the register values of the boot
+ * CPU.
+ *
+ * At the same time, reads from these registers at EL1 previously were not
+ * trapped, allowing the guest to read the actual hardware value. On big-little
+ * machines, this means the VM can see different values depending on where a
+ * given vCPU got scheduled.
+ *
+ * These registers are now trapped as collateral damage from SME, and what
+ * follows attempts to give a user / guest view consistent with the existing
+ * ABI.
+ */
+static bool access_imp_id_reg(struct kvm_vcpu *vcpu,
+			      struct sys_reg_params *p,
+			      const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return write_to_read_only(vcpu, p, r);
+
+	/*
+	 * Return the VM-scoped implementation ID register values if userspace
+	 * has made them writable.
+	 */
+	if (test_bit(KVM_ARCH_FLAG_WRITABLE_IMP_ID_REGS, &vcpu->kvm->arch.flags))
+		return access_id_reg(vcpu, p, r);
+
+	/*
+	 * Otherwise, fall back to the old behavior of returning the value of
+	 * the current CPU.
+	 */
+	switch (reg_to_encoding(r)) {
+	case SYS_REVIDR_EL1:
+		p->regval = read_sysreg(revidr_el1);
+		break;
+	case SYS_AIDR_EL1:
+		p->regval = read_sysreg(aidr_el1);
+		break;
+	default:
+		WARN_ON_ONCE(1);
+	}
+
+	return true;
+}
+
+static u64 __ro_after_init boot_cpu_midr_val;
+static u64 __ro_after_init boot_cpu_revidr_val;
+static u64 __ro_after_init boot_cpu_aidr_val;
+
+static void init_imp_id_regs(void)
+{
+	boot_cpu_midr_val = read_sysreg(midr_el1);
+	boot_cpu_revidr_val = read_sysreg(revidr_el1);
+	boot_cpu_aidr_val = read_sysreg(aidr_el1);
+}
+
+static u64 reset_imp_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	switch (reg_to_encoding(r)) {
+	case SYS_MIDR_EL1:
+		return boot_cpu_midr_val;
+	case SYS_REVIDR_EL1:
+		return boot_cpu_revidr_val;
+	case SYS_AIDR_EL1:
+		return boot_cpu_aidr_val;
+	default:
+		KVM_BUG_ON(1, vcpu->kvm);
+		return 0;
+	}
+}
+
+static int set_imp_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			  u64 val)
+{
+	struct kvm *kvm = vcpu->kvm;
+	u64 expected;
+
+	guard(mutex)(&kvm->arch.config_lock);
+
+	expected = read_id_reg(vcpu, r);
+	if (expected == val)
+		return 0;
+
+	if (!test_bit(KVM_ARCH_FLAG_WRITABLE_IMP_ID_REGS, &kvm->arch.flags))
+		return -EINVAL;
+
+	/*
+	 * Once the VM has started the ID registers are immutable. Reject the
+	 * write if userspace tries to change it.
+	 */
+	if (kvm_vm_has_ran_once(kvm))
+		return -EBUSY;
+
+	/*
+	 * Any value is allowed for the implementation ID registers so long as
+	 * it is within the writable mask.
+	 */
+	if ((val & r->val) != val)
+		return -EINVAL;
+
+	kvm_set_vm_id_reg(kvm, reg_to_encoding(r), val);
+	return 0;
+}
+
+#define IMPLEMENTATION_ID(reg, mask) {			\
+	SYS_DESC(SYS_##reg),				\
+	.access = access_imp_id_reg,			\
+	.get_user = get_id_reg,				\
+	.set_user = set_imp_id_reg,			\
+	.reset = reset_imp_id_reg,			\
+	.val = mask,					\
+	}
+
+static u64 reset_mdcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	__vcpu_assign_sys_reg(vcpu, r->reg, vcpu->kvm->arch.nr_pmu_counters);
+	return vcpu->kvm->arch.nr_pmu_counters;
+}
+
 /*
  * Architected system registers.
  * Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
@@ -2498,7 +3136,9 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 
 	{ SYS_DESC(SYS_DBGVCR32_EL2), undef_access, reset_val, DBGVCR32_EL2, 0 },
 
+	IMPLEMENTATION_ID(MIDR_EL1, GENMASK_ULL(31, 0)),
 	{ SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 },
+	IMPLEMENTATION_ID(REVIDR_EL1, GENMASK_ULL(63, 0)),
 
 	/*
 	 * ID regs: all ID_SANITISED() entries here must have corresponding
@@ -2507,40 +3147,39 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 
 	/* AArch64 mappings of the AArch32 ID registers */
 	/* CRm=1 */
-	AA32_ID_SANITISED(ID_PFR0_EL1),
-	AA32_ID_SANITISED(ID_PFR1_EL1),
+	AA32_ID_WRITABLE(ID_PFR0_EL1),
+	AA32_ID_WRITABLE(ID_PFR1_EL1),
 	{ SYS_DESC(SYS_ID_DFR0_EL1),
 	  .access = access_id_reg,
 	  .get_user = get_id_reg,
 	  .set_user = set_id_dfr0_el1,
 	  .visibility = aa32_id_visibility,
 	  .reset = read_sanitised_id_dfr0_el1,
-	  .val = ID_DFR0_EL1_PerfMon_MASK |
-		 ID_DFR0_EL1_CopDbg_MASK, },
+	  .val = GENMASK(31, 0) },
 	ID_HIDDEN(ID_AFR0_EL1),
-	AA32_ID_SANITISED(ID_MMFR0_EL1),
-	AA32_ID_SANITISED(ID_MMFR1_EL1),
-	AA32_ID_SANITISED(ID_MMFR2_EL1),
-	AA32_ID_SANITISED(ID_MMFR3_EL1),
+	AA32_ID_WRITABLE(ID_MMFR0_EL1),
+	AA32_ID_WRITABLE(ID_MMFR1_EL1),
+	AA32_ID_WRITABLE(ID_MMFR2_EL1),
+	AA32_ID_WRITABLE(ID_MMFR3_EL1),
 
 	/* CRm=2 */
-	AA32_ID_SANITISED(ID_ISAR0_EL1),
-	AA32_ID_SANITISED(ID_ISAR1_EL1),
-	AA32_ID_SANITISED(ID_ISAR2_EL1),
-	AA32_ID_SANITISED(ID_ISAR3_EL1),
-	AA32_ID_SANITISED(ID_ISAR4_EL1),
-	AA32_ID_SANITISED(ID_ISAR5_EL1),
-	AA32_ID_SANITISED(ID_MMFR4_EL1),
-	AA32_ID_SANITISED(ID_ISAR6_EL1),
+	AA32_ID_WRITABLE(ID_ISAR0_EL1),
+	AA32_ID_WRITABLE(ID_ISAR1_EL1),
+	AA32_ID_WRITABLE(ID_ISAR2_EL1),
+	AA32_ID_WRITABLE(ID_ISAR3_EL1),
+	AA32_ID_WRITABLE(ID_ISAR4_EL1),
+	AA32_ID_WRITABLE(ID_ISAR5_EL1),
+	AA32_ID_WRITABLE(ID_MMFR4_EL1),
+	AA32_ID_WRITABLE(ID_ISAR6_EL1),
 
 	/* CRm=3 */
-	AA32_ID_SANITISED(MVFR0_EL1),
-	AA32_ID_SANITISED(MVFR1_EL1),
-	AA32_ID_SANITISED(MVFR2_EL1),
+	AA32_ID_WRITABLE(MVFR0_EL1),
+	AA32_ID_WRITABLE(MVFR1_EL1),
+	AA32_ID_WRITABLE(MVFR2_EL1),
 	ID_UNALLOCATED(3,3),
-	AA32_ID_SANITISED(ID_PFR2_EL1),
+	AA32_ID_WRITABLE(ID_PFR2_EL1),
 	ID_HIDDEN(ID_DFR1_EL1),
-	AA32_ID_SANITISED(ID_MMFR5_EL1),
+	AA32_ID_WRITABLE(ID_MMFR5_EL1),
 	ID_UNALLOCATED(3,7),
 
 	/* AArch64 ID registers */
@@ -2549,12 +3188,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 		    ~(ID_AA64PFR0_EL1_AMU |
 		      ID_AA64PFR0_EL1_MPAM |
 		      ID_AA64PFR0_EL1_SVE |
-		      ID_AA64PFR0_EL1_RAS |
 		      ID_AA64PFR0_EL1_AdvSIMD |
 		      ID_AA64PFR0_EL1_FP)),
 	ID_FILTERED(ID_AA64PFR1_EL1, id_aa64pfr1_el1,
 				     ~(ID_AA64PFR1_EL1_PFAR |
-				       ID_AA64PFR1_EL1_DF2 |
 				       ID_AA64PFR1_EL1_MTEX |
 				       ID_AA64PFR1_EL1_THE |
 				       ID_AA64PFR1_EL1_GCS |
@@ -2564,9 +3201,11 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 				       ID_AA64PFR1_EL1_SME |
 				       ID_AA64PFR1_EL1_RES0 |
 				       ID_AA64PFR1_EL1_MPAM_frac |
-				       ID_AA64PFR1_EL1_RAS_frac |
 				       ID_AA64PFR1_EL1_MTE)),
-	ID_WRITABLE(ID_AA64PFR2_EL1, ID_AA64PFR2_EL1_FPMR),
+	ID_WRITABLE(ID_AA64PFR2_EL1,
+		    ID_AA64PFR2_EL1_FPMR |
+		    ID_AA64PFR2_EL1_MTEFAR |
+		    ID_AA64PFR2_EL1_MTESTOREONLY),
 	ID_UNALLOCATED(4,3),
 	ID_WRITABLE(ID_AA64ZFR0_EL1, ~ID_AA64ZFR0_EL1_RES0),
 	ID_HIDDEN(ID_AA64SMFR0_EL1),
@@ -2608,33 +3247,34 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	ID_WRITABLE(ID_AA64ISAR2_EL1, ~(ID_AA64ISAR2_EL1_RES0 |
 					ID_AA64ISAR2_EL1_APA3 |
 					ID_AA64ISAR2_EL1_GPA3)),
-	ID_UNALLOCATED(6,3),
+	ID_WRITABLE(ID_AA64ISAR3_EL1, (ID_AA64ISAR3_EL1_FPRCVT |
+				       ID_AA64ISAR3_EL1_LSFE |
+				       ID_AA64ISAR3_EL1_FAMINMAX)),
 	ID_UNALLOCATED(6,4),
 	ID_UNALLOCATED(6,5),
 	ID_UNALLOCATED(6,6),
 	ID_UNALLOCATED(6,7),
 
 	/* CRm=7 */
-	ID_WRITABLE(ID_AA64MMFR0_EL1, ~(ID_AA64MMFR0_EL1_RES0 |
-					ID_AA64MMFR0_EL1_TGRAN4_2 |
-					ID_AA64MMFR0_EL1_TGRAN64_2 |
-					ID_AA64MMFR0_EL1_TGRAN16_2)),
+	ID_FILTERED(ID_AA64MMFR0_EL1, id_aa64mmfr0_el1,
+				      ~(ID_AA64MMFR0_EL1_RES0 |
+					ID_AA64MMFR0_EL1_ASIDBITS)),
 	ID_WRITABLE(ID_AA64MMFR1_EL1, ~(ID_AA64MMFR1_EL1_RES0 |
-					ID_AA64MMFR1_EL1_HCX |
-					ID_AA64MMFR1_EL1_TWED |
 					ID_AA64MMFR1_EL1_XNX |
 					ID_AA64MMFR1_EL1_VH |
 					ID_AA64MMFR1_EL1_VMIDBits)),
-	ID_WRITABLE(ID_AA64MMFR2_EL1, ~(ID_AA64MMFR2_EL1_RES0 |
+	ID_FILTERED(ID_AA64MMFR2_EL1,
+		    id_aa64mmfr2_el1, ~(ID_AA64MMFR2_EL1_RES0 |
 					ID_AA64MMFR2_EL1_EVT |
 					ID_AA64MMFR2_EL1_FWB |
 					ID_AA64MMFR2_EL1_IDS |
 					ID_AA64MMFR2_EL1_NV |
 					ID_AA64MMFR2_EL1_CCIDX)),
 	ID_WRITABLE(ID_AA64MMFR3_EL1, (ID_AA64MMFR3_EL1_TCRX	|
+				       ID_AA64MMFR3_EL1_SCTLRX	|
 				       ID_AA64MMFR3_EL1_S1PIE   |
 				       ID_AA64MMFR3_EL1_S1POE)),
-	ID_SANITISED(ID_AA64MMFR4_EL1),
+	ID_WRITABLE(ID_AA64MMFR4_EL1, ID_AA64MMFR4_EL1_NV_frac),
 	ID_UNALLOCATED(7,5),
 	ID_UNALLOCATED(7,6),
 	ID_UNALLOCATED(7,7),
@@ -2642,6 +3282,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_SCTLR_EL1), access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
 	{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
 	{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
+	{ SYS_DESC(SYS_SCTLR2_EL1), access_vm_reg, reset_val, SCTLR2_EL1, 0,
+	  .visibility = sctlr2_visibility },
 
 	MTE_REG(RGSR_EL1),
 	MTE_REG(GCR_EL1),
@@ -2671,14 +3313,19 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_AFSR1_EL1), access_vm_reg, reset_unknown, AFSR1_EL1 },
 	{ SYS_DESC(SYS_ESR_EL1), access_vm_reg, reset_unknown, ESR_EL1 },
 
-	{ SYS_DESC(SYS_ERRIDR_EL1), trap_raz_wi },
-	{ SYS_DESC(SYS_ERRSELR_EL1), trap_raz_wi },
-	{ SYS_DESC(SYS_ERXFR_EL1), trap_raz_wi },
-	{ SYS_DESC(SYS_ERXCTLR_EL1), trap_raz_wi },
-	{ SYS_DESC(SYS_ERXSTATUS_EL1), trap_raz_wi },
-	{ SYS_DESC(SYS_ERXADDR_EL1), trap_raz_wi },
-	{ SYS_DESC(SYS_ERXMISC0_EL1), trap_raz_wi },
-	{ SYS_DESC(SYS_ERXMISC1_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_ERRIDR_EL1), access_ras },
+	{ SYS_DESC(SYS_ERRSELR_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXFR_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXCTLR_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXSTATUS_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXADDR_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXPFGF_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXPFGCTL_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXPFGCDN_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXMISC0_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXMISC1_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXMISC2_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXMISC3_EL1), access_ras },
 
 	MTE_REG(TFSR_EL1),
 	MTE_REG(TFSRE0_EL1),
@@ -2697,6 +3344,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_PMBLIMITR_EL1), undef_access },
 	{ SYS_DESC(SYS_PMBPTR_EL1), undef_access },
 	{ SYS_DESC(SYS_PMBSR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMSDSFR_EL1), undef_access },
 	/* PMBIDR_EL1 is not trapped */
 
 	{ PMU_SYS_REG(PMINTENSET_EL1),
@@ -2740,7 +3388,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_ICC_AP1R1_EL1), undef_access },
 	{ SYS_DESC(SYS_ICC_AP1R2_EL1), undef_access },
 	{ SYS_DESC(SYS_ICC_AP1R3_EL1), undef_access },
-	{ SYS_DESC(SYS_ICC_DIR_EL1), undef_access },
+	{ SYS_DESC(SYS_ICC_DIR_EL1), access_gic_dir },
 	{ SYS_DESC(SYS_ICC_RPR_EL1), undef_access },
 	{ SYS_DESC(SYS_ICC_SGI1R_EL1), access_gic_sgi },
 	{ SYS_DESC(SYS_ICC_ASGI1R_EL1), access_gic_sgi },
@@ -2768,6 +3416,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	  .set_user = set_clidr, .val = ~CLIDR_EL1_RES0 },
 	{ SYS_DESC(SYS_CCSIDR2_EL1), undef_access },
 	{ SYS_DESC(SYS_SMIDR_EL1), undef_access },
+	IMPLEMENTATION_ID(AIDR_EL1, GENMASK_ULL(63, 0)),
 	{ SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 },
 	ID_FILTERED(CTR_EL0, ctr_el0,
 		    CTR_EL0_DIC_MASK |
@@ -2804,7 +3453,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	  .access = access_pmceid, .reset = NULL },
 	{ PMU_SYS_REG(PMCCNTR_EL0),
 	  .access = access_pmu_evcntr, .reset = reset_unknown,
-	  .reg = PMCCNTR_EL0, .get_user = get_pmu_evcntr},
+	  .reg = PMCCNTR_EL0, .get_user = get_pmu_evcntr,
+	  .set_user = set_pmu_evcntr },
 	{ PMU_SYS_REG(PMXEVTYPER_EL0),
 	  .access = access_pmu_evtyper, .reset = NULL },
 	{ PMU_SYS_REG(PMXEVCNTR_EL0),
@@ -2900,11 +3550,19 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	AMU_AMEVTYPER1_EL0(14),
 	AMU_AMEVTYPER1_EL0(15),
 
-	{ SYS_DESC(SYS_CNTPCT_EL0), access_arch_timer },
+	{ SYS_DESC(SYS_CNTPCT_EL0), .access = access_arch_timer,
+	  .get_user = arch_timer_get_user, .set_user = arch_timer_set_user },
+	{ SYS_DESC(SYS_CNTVCT_EL0), .access = access_arch_timer,
+	  .get_user = arch_timer_get_user, .set_user = arch_timer_set_user },
 	{ SYS_DESC(SYS_CNTPCTSS_EL0), access_arch_timer },
+	{ SYS_DESC(SYS_CNTVCTSS_EL0), access_arch_timer },
 	{ SYS_DESC(SYS_CNTP_TVAL_EL0), access_arch_timer },
-	{ SYS_DESC(SYS_CNTP_CTL_EL0), access_arch_timer },
-	{ SYS_DESC(SYS_CNTP_CVAL_EL0), access_arch_timer },
+	TIMER_REG(CNTP_CTL_EL0, NULL),
+	TIMER_REG(CNTP_CVAL_EL0, NULL),
+
+	{ SYS_DESC(SYS_CNTV_TVAL_EL0), access_arch_timer },
+	TIMER_REG(CNTV_CTL_EL0, NULL),
+	TIMER_REG(CNTV_CVAL_EL0, NULL),
 
 	/* PMEVCNTRn_EL0 */
 	PMU_PMEVCNTR_EL0(0),
@@ -2981,12 +3639,14 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	EL2_REG_VNCR(VMPIDR_EL2, reset_unknown, 0),
 	EL2_REG(SCTLR_EL2, access_rw, reset_val, SCTLR_EL2_RES1),
 	EL2_REG(ACTLR_EL2, access_rw, reset_val, 0),
+	EL2_REG_FILTERED(SCTLR2_EL2, access_vm_reg, reset_val, 0,
+			 sctlr2_el2_visibility),
 	EL2_REG_VNCR(HCR_EL2, reset_hcr, 0),
-	EL2_REG(MDCR_EL2, access_rw, reset_val, 0),
+	EL2_REG(MDCR_EL2, access_mdcr, reset_mdcr, 0),
 	EL2_REG(CPTR_EL2, access_rw, reset_val, CPTR_NVHE_EL2_RES1),
 	EL2_REG_VNCR(HSTR_EL2, reset_val, 0),
-	EL2_REG_VNCR(HFGRTR_EL2, reset_val, 0),
-	EL2_REG_VNCR(HFGWTR_EL2, reset_val, 0),
+	EL2_REG_VNCR_FILT(HFGRTR_EL2, fgt_visibility),
+	EL2_REG_VNCR_FILT(HFGWTR_EL2, fgt_visibility),
 	EL2_REG_VNCR(HFGITR_EL2, reset_val, 0),
 	EL2_REG_VNCR(HACR_EL2, reset_val, 0),
 
@@ -3002,11 +3662,18 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 			 tcr2_el2_visibility),
 	EL2_REG_VNCR(VTTBR_EL2, reset_val, 0),
 	EL2_REG_VNCR(VTCR_EL2, reset_val, 0),
+	EL2_REG_FILTERED(VNCR_EL2, bad_vncr_trap, reset_val, 0,
+			 vncr_el2_visibility),
 
 	{ SYS_DESC(SYS_DACR32_EL2), undef_access, reset_unknown, DACR32_EL2 },
-	EL2_REG_VNCR(HDFGRTR_EL2, reset_val, 0),
-	EL2_REG_VNCR(HDFGWTR_EL2, reset_val, 0),
-	EL2_REG_VNCR(HAFGRTR_EL2, reset_val, 0),
+	EL2_REG_VNCR_FILT(HDFGRTR2_EL2, fgt2_visibility),
+	EL2_REG_VNCR_FILT(HDFGWTR2_EL2, fgt2_visibility),
+	EL2_REG_VNCR_FILT(HFGRTR2_EL2, fgt2_visibility),
+	EL2_REG_VNCR_FILT(HFGWTR2_EL2, fgt2_visibility),
+	EL2_REG_VNCR_FILT(HDFGRTR_EL2, fgt_visibility),
+	EL2_REG_VNCR_FILT(HDFGWTR_EL2, fgt_visibility),
+	EL2_REG_VNCR_FILT(HAFGRTR_EL2, fgt_visibility),
+	EL2_REG_VNCR_FILT(HFGITR2_EL2, fgt2_visibility),
 	EL2_REG_REDIR(SPSR_EL2, reset_val, 0),
 	EL2_REG_REDIR(ELR_EL2, reset_val, 0),
 	{ SYS_DESC(SYS_SP_EL1), access_sp_el1},
@@ -3021,6 +3688,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	EL2_REG(AFSR0_EL2, access_rw, reset_val, 0),
 	EL2_REG(AFSR1_EL2, access_rw, reset_val, 0),
 	EL2_REG_REDIR(ESR_EL2, reset_val, 0),
+	EL2_REG_VNCR(VSESR_EL2, reset_unknown, 0),
 	{ SYS_DESC(SYS_FPEXC32_EL2), undef_access, reset_val, FPEXC32_EL2, 0x700 },
 
 	EL2_REG_REDIR(FAR_EL2, reset_val, 0),
@@ -3047,19 +3715,68 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_MPAMVPM7_EL2), undef_access },
 
 	EL2_REG(VBAR_EL2, access_rw, reset_val, 0),
-	EL2_REG(RVBAR_EL2, access_rw, reset_val, 0),
+	{ SYS_DESC(SYS_RVBAR_EL2), undef_access },
 	{ SYS_DESC(SYS_RMR_EL2), undef_access },
-
-	EL2_REG_VNCR(ICH_HCR_EL2, reset_val, 0),
+	EL2_REG_VNCR(VDISR_EL2, reset_unknown, 0),
+
+	EL2_REG_VNCR_GICv3(ICH_AP0R0_EL2),
+	EL2_REG_VNCR_GICv3(ICH_AP0R1_EL2),
+	EL2_REG_VNCR_GICv3(ICH_AP0R2_EL2),
+	EL2_REG_VNCR_GICv3(ICH_AP0R3_EL2),
+	EL2_REG_VNCR_GICv3(ICH_AP1R0_EL2),
+	EL2_REG_VNCR_GICv3(ICH_AP1R1_EL2),
+	EL2_REG_VNCR_GICv3(ICH_AP1R2_EL2),
+	EL2_REG_VNCR_GICv3(ICH_AP1R3_EL2),
+
+	{ SYS_DESC(SYS_ICC_SRE_EL2), access_gic_sre },
+
+	EL2_REG_VNCR_GICv3(ICH_HCR_EL2),
+	{ SYS_DESC(SYS_ICH_VTR_EL2), access_gic_vtr },
+	{ SYS_DESC(SYS_ICH_MISR_EL2), access_gic_misr },
+	{ SYS_DESC(SYS_ICH_EISR_EL2), access_gic_eisr },
+	{ SYS_DESC(SYS_ICH_ELRSR_EL2), access_gic_elrsr },
+	EL2_REG_VNCR_GICv3(ICH_VMCR_EL2),
+
+	EL2_REG_VNCR_GICv3(ICH_LR0_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR1_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR2_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR3_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR4_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR5_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR6_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR7_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR8_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR9_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR10_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR11_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR12_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR13_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR14_EL2),
+	EL2_REG_VNCR_GICv3(ICH_LR15_EL2),
 
 	EL2_REG(CONTEXTIDR_EL2, access_rw, reset_val, 0),
 	EL2_REG(TPIDR_EL2, access_rw, reset_val, 0),
 
 	EL2_REG_VNCR(CNTVOFF_EL2, reset_val, 0),
 	EL2_REG(CNTHCTL_EL2, access_rw, reset_val, 0),
+	{ SYS_DESC(SYS_CNTHP_TVAL_EL2), access_arch_timer },
+	TIMER_REG(CNTHP_CTL_EL2, el2_visibility),
+	TIMER_REG(CNTHP_CVAL_EL2, el2_visibility),
+
+	{ SYS_DESC(SYS_CNTHV_TVAL_EL2), access_arch_timer, .visibility = cnthv_visibility },
+	TIMER_REG(CNTHV_CTL_EL2, cnthv_visibility),
+	TIMER_REG(CNTHV_CVAL_EL2, cnthv_visibility),
 
 	{ SYS_DESC(SYS_CNTKCTL_EL12), access_cntkctl_el12 },
 
+	{ SYS_DESC(SYS_CNTP_TVAL_EL02), access_arch_timer },
+	{ SYS_DESC(SYS_CNTP_CTL_EL02), access_arch_timer },
+	{ SYS_DESC(SYS_CNTP_CVAL_EL02), access_arch_timer },
+
+	{ SYS_DESC(SYS_CNTV_TVAL_EL02), access_arch_timer },
+	{ SYS_DESC(SYS_CNTV_CTL_EL02), access_arch_timer },
+	{ SYS_DESC(SYS_CNTV_CVAL_EL02), access_arch_timer },
+
 	EL2_REG(SP_EL2, NULL, reset_unknown, 0),
 };
 
@@ -3068,7 +3785,8 @@ static bool handle_at_s1e01(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 {
 	u32 op = sys_insn(p->Op0, p->Op1, p->CRn, p->CRm, p->Op2);
 
-	__kvm_at_s1e01(vcpu, op, p->regval);
+	if (__kvm_at_s1e01(vcpu, op, p->regval))
+		return false;
 
 	return true;
 }
@@ -3085,7 +3803,8 @@ static bool handle_at_s1e2(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		return false;
 	}
 
-	__kvm_at_s1e2(vcpu, op, p->regval);
+	if (__kvm_at_s1e2(vcpu, op, p->regval))
+		return false;
 
 	return true;
 }
@@ -3095,7 +3814,8 @@ static bool handle_at_s12(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 {
 	u32 op = sys_insn(p->Op0, p->Op1, p->CRn, p->CRm, p->Op2);
 
-	__kvm_at_s12(vcpu, op, p->regval);
+	if (__kvm_at_s12(vcpu, op, p->regval))
+		return false;
 
 	return true;
 }
@@ -3237,8 +3957,7 @@ static bool handle_ripas2e1is(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 {
 	u32 sys_encoding = sys_insn(p->Op0, p->Op1, p->CRn, p->CRm, p->Op2);
 	u64 vttbr = vcpu_read_sys_reg(vcpu, VTTBR_EL2);
-	u64 base, range, tg, num, scale;
-	int shift;
+	u64 base, range;
 
 	if (!kvm_supported_tlbi_ipas2_op(vcpu, sys_encoding))
 		return undef_access(vcpu, p, r);
@@ -3248,26 +3967,7 @@ static bool handle_ripas2e1is(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	 * of the guest's S2 (different base granule size, for example), we
 	 * decide to ignore TTL and only use the described range.
 	 */
-	tg	= FIELD_GET(GENMASK(47, 46), p->regval);
-	scale	= FIELD_GET(GENMASK(45, 44), p->regval);
-	num	= FIELD_GET(GENMASK(43, 39), p->regval);
-	base	= p->regval & GENMASK(36, 0);
-
-	switch(tg) {
-	case 1:
-		shift = 12;
-		break;
-	case 2:
-		shift = 14;
-		break;
-	case 3:
-	default:		/* IMPDEF: handle tg==0 as 64k */
-		shift = 16;
-		break;
-	}
-
-	base <<= shift;
-	range = __TLBI_RANGE_PAGES(num, scale) << shift;
+	base = decode_range_tlbi(p->regval, &range, NULL);
 
 	kvm_s2_mmu_iterate_by_vmid(vcpu->kvm, get_vmid(vttbr),
 				   &(union tlbi_info) {
@@ -3333,11 +4033,22 @@ static void s2_mmu_tlbi_s1e1(struct kvm_s2_mmu *mmu,
 	WARN_ON(__kvm_tlbi_s1e2(mmu, info->va.addr, info->va.encoding));
 }
 
+static bool handle_tlbi_el2(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			    const struct sys_reg_desc *r)
+{
+	u32 sys_encoding = sys_insn(p->Op0, p->Op1, p->CRn, p->CRm, p->Op2);
+
+	if (!kvm_supported_tlbi_s1e2_op(vcpu, sys_encoding))
+		return undef_access(vcpu, p, r);
+
+	kvm_handle_s1e2_tlbi(vcpu, sys_encoding, p->regval);
+	return true;
+}
+
 static bool handle_tlbi_el1(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 			    const struct sys_reg_desc *r)
 {
 	u32 sys_encoding = sys_insn(p->Op0, p->Op1, p->CRn, p->CRm, p->Op2);
-	u64 vttbr = vcpu_read_sys_reg(vcpu, VTTBR_EL2);
 
 	/*
 	 * If we're here, this is because we've trapped on a EL1 TLBI
@@ -3348,6 +4059,13 @@ static bool handle_tlbi_el1(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	 * - HCR_EL2.E2H == 0 : a non-VHE guest
 	 * - HCR_EL2.{E2H,TGE} == { 1, 0 } : a VHE guest in guest mode
 	 *
+	 * Another possibility is that we are invalidating the EL2 context
+	 * using EL1 instructions, but that we landed here because we need
+	 * additional invalidation for structures that are not held in the
+	 * CPU TLBs (such as the VNCR pseudo-TLB and its EL2 mapping). In
+	 * that case, we are guaranteed that HCR_EL2.{E2H,TGE} == { 1, 1 }
+	 * as we don't allow an NV-capable L1 in a nVHE configuration.
+	 *
 	 * We don't expect these helpers to ever be called when running
 	 * in a vEL1 context.
 	 */
@@ -3357,7 +4075,13 @@ static bool handle_tlbi_el1(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	if (!kvm_supported_tlbi_s1e1_op(vcpu, sys_encoding))
 		return undef_access(vcpu, p, r);
 
-	kvm_s2_mmu_iterate_by_vmid(vcpu->kvm, get_vmid(vttbr),
+	if (vcpu_el2_e2h_is_set(vcpu) && vcpu_el2_tge_is_set(vcpu)) {
+		kvm_handle_s1e2_tlbi(vcpu, sys_encoding, p->regval);
+		return true;
+	}
+
+	kvm_s2_mmu_iterate_by_vmid(vcpu->kvm,
+				   get_vmid(__vcpu_sys_reg(vcpu, VTTBR_EL2)),
 				   &(union tlbi_info) {
 					   .va = {
 						   .addr = p->regval,
@@ -3479,16 +4203,21 @@ static struct sys_reg_desc sys_insn_descs[] = {
 	SYS_INSN(TLBI_IPAS2LE1IS, handle_ipas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1IS, handle_ripas2e1is),
 
-	SYS_INSN(TLBI_ALLE2OS, undef_access),
-	SYS_INSN(TLBI_VAE2OS, undef_access),
+	SYS_INSN(TLBI_ALLE2OS, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2OS, handle_tlbi_el2),
 	SYS_INSN(TLBI_ALLE1OS, handle_alle1is),
-	SYS_INSN(TLBI_VALE2OS, undef_access),
+	SYS_INSN(TLBI_VALE2OS, handle_tlbi_el2),
 	SYS_INSN(TLBI_VMALLS12E1OS, handle_vmalls12e1is),
 
-	SYS_INSN(TLBI_RVAE2IS, undef_access),
-	SYS_INSN(TLBI_RVALE2IS, undef_access),
+	SYS_INSN(TLBI_RVAE2IS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2IS, handle_tlbi_el2),
+	SYS_INSN(TLBI_ALLE2IS, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2IS, handle_tlbi_el2),
 
 	SYS_INSN(TLBI_ALLE1IS, handle_alle1is),
+
+	SYS_INSN(TLBI_VALE2IS, handle_tlbi_el2),
+
 	SYS_INSN(TLBI_VMALLS12E1IS, handle_vmalls12e1is),
 	SYS_INSN(TLBI_IPAS2E1OS, handle_ipas2e1is),
 	SYS_INSN(TLBI_IPAS2E1, handle_ipas2e1is),
@@ -3498,11 +4227,17 @@ static struct sys_reg_desc sys_insn_descs[] = {
 	SYS_INSN(TLBI_IPAS2LE1, handle_ipas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1, handle_ripas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1OS, handle_ripas2e1is),
-	SYS_INSN(TLBI_RVAE2OS, undef_access),
-	SYS_INSN(TLBI_RVALE2OS, undef_access),
-	SYS_INSN(TLBI_RVAE2, undef_access),
-	SYS_INSN(TLBI_RVALE2, undef_access),
+	SYS_INSN(TLBI_RVAE2OS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2OS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVAE2, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2, handle_tlbi_el2),
+	SYS_INSN(TLBI_ALLE2, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2, handle_tlbi_el2),
+
 	SYS_INSN(TLBI_ALLE1, handle_alle1is),
+
+	SYS_INSN(TLBI_VALE2, handle_tlbi_el2),
+
 	SYS_INSN(TLBI_VMALLS12E1, handle_vmalls12e1is),
 
 	SYS_INSN(TLBI_IPAS2E1ISNXS, handle_ipas2e1is),
@@ -3510,19 +4245,19 @@ static struct sys_reg_desc sys_insn_descs[] = {
 	SYS_INSN(TLBI_IPAS2LE1ISNXS, handle_ipas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1ISNXS, handle_ripas2e1is),
 
-	SYS_INSN(TLBI_ALLE2OSNXS, undef_access),
-	SYS_INSN(TLBI_VAE2OSNXS, undef_access),
+	SYS_INSN(TLBI_ALLE2OSNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2OSNXS, handle_tlbi_el2),
 	SYS_INSN(TLBI_ALLE1OSNXS, handle_alle1is),
-	SYS_INSN(TLBI_VALE2OSNXS, undef_access),
+	SYS_INSN(TLBI_VALE2OSNXS, handle_tlbi_el2),
 	SYS_INSN(TLBI_VMALLS12E1OSNXS, handle_vmalls12e1is),
 
-	SYS_INSN(TLBI_RVAE2ISNXS, undef_access),
-	SYS_INSN(TLBI_RVALE2ISNXS, undef_access),
-	SYS_INSN(TLBI_ALLE2ISNXS, undef_access),
-	SYS_INSN(TLBI_VAE2ISNXS, undef_access),
+	SYS_INSN(TLBI_RVAE2ISNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2ISNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_ALLE2ISNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2ISNXS, handle_tlbi_el2),
 
 	SYS_INSN(TLBI_ALLE1ISNXS, handle_alle1is),
-	SYS_INSN(TLBI_VALE2ISNXS, undef_access),
+	SYS_INSN(TLBI_VALE2ISNXS, handle_tlbi_el2),
 	SYS_INSN(TLBI_VMALLS12E1ISNXS, handle_vmalls12e1is),
 	SYS_INSN(TLBI_IPAS2E1OSNXS, handle_ipas2e1is),
 	SYS_INSN(TLBI_IPAS2E1NXS, handle_ipas2e1is),
@@ -3532,14 +4267,14 @@ static struct sys_reg_desc sys_insn_descs[] = {
 	SYS_INSN(TLBI_IPAS2LE1NXS, handle_ipas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1NXS, handle_ripas2e1is),
 	SYS_INSN(TLBI_RIPAS2LE1OSNXS, handle_ripas2e1is),
-	SYS_INSN(TLBI_RVAE2OSNXS, undef_access),
-	SYS_INSN(TLBI_RVALE2OSNXS, undef_access),
-	SYS_INSN(TLBI_RVAE2NXS, undef_access),
-	SYS_INSN(TLBI_RVALE2NXS, undef_access),
-	SYS_INSN(TLBI_ALLE2NXS, undef_access),
-	SYS_INSN(TLBI_VAE2NXS, undef_access),
+	SYS_INSN(TLBI_RVAE2OSNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2OSNXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVAE2NXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_RVALE2NXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_ALLE2NXS, handle_tlbi_el2),
+	SYS_INSN(TLBI_VAE2NXS, handle_tlbi_el2),
 	SYS_INSN(TLBI_ALLE1NXS, handle_alle1is),
-	SYS_INSN(TLBI_VALE2NXS, undef_access),
+	SYS_INSN(TLBI_VALE2NXS, handle_tlbi_el2),
 	SYS_INSN(TLBI_VMALLS12E1NXS, handle_vmalls12e1is),
 };
 
@@ -3571,18 +4306,20 @@ static bool trap_dbgdidr(struct kvm_vcpu *vcpu,
  * None of the other registers share their location, so treat them as
  * if they were 64bit.
  */
-#define DBG_BCR_BVR_WCR_WVR(n)						      \
-	/* DBGBVRn */							      \
-	{ AA32(LO), Op1( 0), CRn( 0), CRm((n)), Op2( 4), trap_bvr, NULL, n }, \
-	/* DBGBCRn */							      \
-	{ Op1( 0), CRn( 0), CRm((n)), Op2( 5), trap_bcr, NULL, n },	      \
-	/* DBGWVRn */							      \
-	{ Op1( 0), CRn( 0), CRm((n)), Op2( 6), trap_wvr, NULL, n },	      \
-	/* DBGWCRn */							      \
-	{ Op1( 0), CRn( 0), CRm((n)), Op2( 7), trap_wcr, NULL, n }
-
-#define DBGBXVR(n)							      \
-	{ AA32(HI), Op1( 0), CRn( 1), CRm((n)), Op2( 1), trap_bvr, NULL, n }
+#define DBG_BCR_BVR_WCR_WVR(n)							\
+	/* DBGBVRn */								\
+	{ AA32(LO), Op1( 0), CRn( 0), CRm((n)), Op2( 4),			\
+	  trap_dbg_wb_reg, NULL, n },						\
+	/* DBGBCRn */								\
+	{ Op1( 0), CRn( 0), CRm((n)), Op2( 5), trap_dbg_wb_reg, NULL, n },	\
+	/* DBGWVRn */								\
+	{ Op1( 0), CRn( 0), CRm((n)), Op2( 6), trap_dbg_wb_reg, NULL, n },	\
+	/* DBGWCRn */								\
+	{ Op1( 0), CRn( 0), CRm((n)), Op2( 7), trap_dbg_wb_reg, NULL, n }
+
+#define DBGBXVR(n)								\
+	{ AA32(HI), Op1( 0), CRn( 1), CRm((n)), Op2( 1),			\
+	  trap_dbg_wb_reg, NULL, n }
 
 /*
  * Trapped cp14 registers. We generally ignore most of the external
@@ -3779,7 +4516,7 @@ static const struct sys_reg_desc cp15_regs[] = {
 	{ CP15_SYS_DESC(SYS_ICC_AP1R1_EL1), undef_access },
 	{ CP15_SYS_DESC(SYS_ICC_AP1R2_EL1), undef_access },
 	{ CP15_SYS_DESC(SYS_ICC_AP1R3_EL1), undef_access },
-	{ CP15_SYS_DESC(SYS_ICC_DIR_EL1), undef_access },
+	{ CP15_SYS_DESC(SYS_ICC_DIR_EL1), access_gic_dir },
 	{ CP15_SYS_DESC(SYS_ICC_RPR_EL1), undef_access },
 	{ CP15_SYS_DESC(SYS_ICC_IAR1_EL1), undef_access },
 	{ CP15_SYS_DESC(SYS_ICC_EOIR1_EL1), undef_access },
@@ -3879,18 +4616,20 @@ static const struct sys_reg_desc cp15_64_regs[] = {
 	{ SYS_DESC(SYS_AARCH32_CNTPCT),	      access_arch_timer },
 	{ Op1( 1), CRn( 0), CRm( 2), Op2( 0), access_vm_reg, NULL, TTBR1_EL1 },
 	{ Op1( 1), CRn( 0), CRm(12), Op2( 0), access_gic_sgi }, /* ICC_ASGI1R */
+	{ SYS_DESC(SYS_AARCH32_CNTVCT),	      access_arch_timer },
 	{ Op1( 2), CRn( 0), CRm(12), Op2( 0), access_gic_sgi }, /* ICC_SGI0R */
 	{ SYS_DESC(SYS_AARCH32_CNTP_CVAL),    access_arch_timer },
 	{ SYS_DESC(SYS_AARCH32_CNTPCTSS),     access_arch_timer },
+	{ SYS_DESC(SYS_AARCH32_CNTVCTSS),     access_arch_timer },
 };
 
 static bool check_sysreg_table(const struct sys_reg_desc *table, unsigned int n,
-			       bool is_32)
+			       bool reset_check)
 {
 	unsigned int i;
 
 	for (i = 0; i < n; i++) {
-		if (!is_32 && table[i].reg && !table[i].reset) {
+		if (reset_check && table[i].reg && !table[i].reset) {
 			kvm_err("sys_reg table %pS entry %d (%s) lacks reset\n",
 				&table[i], i, table[i].name);
 			return false;
@@ -4085,7 +4824,7 @@ static bool kvm_esr_cp10_id_to_sys64(u64 esr, struct sys_reg_params *params)
 		return true;
 
 	kvm_pr_unimpl("Unhandled cp10 register %s: %u\n",
-		      params->is_write ? "write" : "read", reg_id);
+		      str_write_read(params->is_write), reg_id);
 	return false;
 }
 
@@ -4201,9 +4940,13 @@ int kvm_handle_cp15_32(struct kvm_vcpu *vcpu)
 	 * Certain AArch32 ID registers are handled by rerouting to the AArch64
 	 * system register table. Registers in the ID range where CRm=0 are
 	 * excluded from this scheme as they do not trivially map into AArch64
-	 * system register encodings.
+	 * system register encodings, except for AIDR/REVIDR.
 	 */
-	if (params.Op1 == 0 && params.CRn == 0 && params.CRm)
+	if (params.Op1 == 0 && params.CRn == 0 &&
+	    (params.CRm || params.Op2 == 6 /* REVIDR */))
+		return kvm_emulate_cp15_id_reg(vcpu, &params);
+	if (params.Op1 == 1 && params.CRn == 0 &&
+	    params.CRm == 0 && params.Op2 == 7 /* AIDR */)
 		return kvm_emulate_cp15_id_reg(vcpu, &params);
 
 	return kvm_handle_cp_32(vcpu, &params, cp15_regs, ARRAY_SIZE(cp15_regs));
@@ -4396,9 +5139,15 @@ void kvm_reset_sys_regs(struct kvm_vcpu *vcpu)
 			reset_vcpu_ftr_id_reg(vcpu, r);
 		else
 			r->reset(vcpu, r);
+
+		if (r->reg >= __SANITISED_REG_START__ && r->reg < NR_SYS_REGS)
+			__vcpu_rmw_sys_reg(vcpu, r->reg, |=, 0);
 	}
 
 	set_bit(KVM_ARCH_FLAG_ID_REGS_INITIALIZED, &kvm->arch.flags);
+
+	if (kvm_vcpu_has_pmu(vcpu))
+		kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
 }
 
 /**
@@ -4504,65 +5253,6 @@ id_to_sys_reg_desc(struct kvm_vcpu *vcpu, u64 id,
 	return r;
 }
 
-/*
- * These are the invariant sys_reg registers: we let the guest see the
- * host versions of these, so they're part of the guest state.
- *
- * A future CPU may provide a mechanism to present different values to
- * the guest, or a future kvm may trap them.
- */
-
-#define FUNCTION_INVARIANT(reg)						\
-	static u64 reset_##reg(struct kvm_vcpu *v,			\
-			       const struct sys_reg_desc *r)		\
-	{								\
-		((struct sys_reg_desc *)r)->val = read_sysreg(reg);	\
-		return ((struct sys_reg_desc *)r)->val;			\
-	}
-
-FUNCTION_INVARIANT(midr_el1)
-FUNCTION_INVARIANT(revidr_el1)
-FUNCTION_INVARIANT(aidr_el1)
-
-/* ->val is filled in by kvm_sys_reg_table_init() */
-static struct sys_reg_desc invariant_sys_regs[] __ro_after_init = {
-	{ SYS_DESC(SYS_MIDR_EL1), NULL, reset_midr_el1 },
-	{ SYS_DESC(SYS_REVIDR_EL1), NULL, reset_revidr_el1 },
-	{ SYS_DESC(SYS_AIDR_EL1), NULL, reset_aidr_el1 },
-};
-
-static int get_invariant_sys_reg(u64 id, u64 __user *uaddr)
-{
-	const struct sys_reg_desc *r;
-
-	r = get_reg_by_id(id, invariant_sys_regs,
-			  ARRAY_SIZE(invariant_sys_regs));
-	if (!r)
-		return -ENOENT;
-
-	return put_user(r->val, uaddr);
-}
-
-static int set_invariant_sys_reg(u64 id, u64 __user *uaddr)
-{
-	const struct sys_reg_desc *r;
-	u64 val;
-
-	r = get_reg_by_id(id, invariant_sys_regs,
-			  ARRAY_SIZE(invariant_sys_regs));
-	if (!r)
-		return -ENOENT;
-
-	if (get_user(val, uaddr))
-		return -EFAULT;
-
-	/* This is what we mean by invariant: you can't change it. */
-	if (r->val != val)
-		return -EINVAL;
-
-	return 0;
-}
-
 static int demux_c15_get(struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
 {
 	u32 val;
@@ -4616,15 +5306,28 @@ static int demux_c15_set(struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
 	}
 }
 
+static u64 kvm_one_reg_to_id(const struct kvm_one_reg *reg)
+{
+	switch(reg->id) {
+	case KVM_REG_ARM_TIMER_CVAL:
+		return TO_ARM64_SYS_REG(CNTV_CVAL_EL0);
+	case KVM_REG_ARM_TIMER_CNT:
+		return TO_ARM64_SYS_REG(CNTVCT_EL0);
+	default:
+		return reg->id;
+	}
+}
+
 int kvm_sys_reg_get_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg,
 			 const struct sys_reg_desc table[], unsigned int num)
 {
 	u64 __user *uaddr = (u64 __user *)(unsigned long)reg->addr;
 	const struct sys_reg_desc *r;
+	u64 id = kvm_one_reg_to_id(reg);
 	u64 val;
 	int ret;
 
-	r = id_to_sys_reg_desc(vcpu, reg->id, table, num);
+	r = id_to_sys_reg_desc(vcpu, id, table, num);
 	if (!r || sysreg_hidden(vcpu, r))
 		return -ENOENT;
 
@@ -4644,15 +5347,10 @@ int kvm_sys_reg_get_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg,
 int kvm_arm_sys_reg_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 {
 	void __user *uaddr = (void __user *)(unsigned long)reg->addr;
-	int err;
 
 	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX)
 		return demux_c15_get(vcpu, reg->id, uaddr);
 
-	err = get_invariant_sys_reg(reg->id, uaddr);
-	if (err != -ENOENT)
-		return err;
-
 	return kvm_sys_reg_get_user(vcpu, reg,
 				    sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
 }
@@ -4662,13 +5360,14 @@ int kvm_sys_reg_set_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg,
 {
 	u64 __user *uaddr = (u64 __user *)(unsigned long)reg->addr;
 	const struct sys_reg_desc *r;
+	u64 id = kvm_one_reg_to_id(reg);
 	u64 val;
 	int ret;
 
 	if (get_user(val, uaddr))
 		return -EFAULT;
 
-	r = id_to_sys_reg_desc(vcpu, reg->id, table, num);
+	r = id_to_sys_reg_desc(vcpu, id, table, num);
 	if (!r || sysreg_hidden(vcpu, r))
 		return -ENOENT;
 
@@ -4678,7 +5377,7 @@ int kvm_sys_reg_set_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg,
 	if (r->set_user) {
 		ret = (r->set_user)(vcpu, r, val);
 	} else {
-		__vcpu_sys_reg(vcpu, r->reg) = val;
+		__vcpu_assign_sys_reg(vcpu, r->reg, val);
 		ret = 0;
 	}
 
@@ -4688,15 +5387,10 @@ int kvm_sys_reg_set_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg,
 int kvm_arm_sys_reg_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 {
 	void __user *uaddr = (void __user *)(unsigned long)reg->addr;
-	int err;
 
 	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX)
 		return demux_c15_set(vcpu, reg->id, uaddr);
 
-	err = set_invariant_sys_reg(reg->id, uaddr);
-	if (err != -ENOENT)
-		return err;
-
 	return kvm_sys_reg_set_user(vcpu, reg,
 				    sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
 }
@@ -4733,10 +5427,23 @@ static u64 sys_reg_to_index(const struct sys_reg_desc *reg)
 
 static bool copy_reg_to_user(const struct sys_reg_desc *reg, u64 __user **uind)
 {
+	u64 idx;
+
 	if (!*uind)
 		return true;
 
-	if (put_user(sys_reg_to_index(reg), *uind))
+	switch (reg_to_encoding(reg)) {
+	case SYS_CNTV_CVAL_EL0:
+		idx = KVM_REG_ARM_TIMER_CVAL;
+		break;
+	case SYS_CNTVCT_EL0:
+		idx = KVM_REG_ARM_TIMER_CNT;
+		break;
+	default:
+		idx = sys_reg_to_index(reg);
+	}
+
+	if (put_user(idx, *uind))
 		return false;
 
 	(*uind)++;
@@ -4785,23 +5492,14 @@ static int walk_sys_regs(struct kvm_vcpu *vcpu, u64 __user *uind)
 
 unsigned long kvm_arm_num_sys_reg_descs(struct kvm_vcpu *vcpu)
 {
-	return ARRAY_SIZE(invariant_sys_regs)
-		+ num_demux_regs()
+	return num_demux_regs()
 		+ walk_sys_regs(vcpu, (u64 __user *)NULL);
 }
 
 int kvm_arm_copy_sys_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
 {
-	unsigned int i;
 	int err;
 
-	/* Then give them all the invariant registers' indices. */
-	for (i = 0; i < ARRAY_SIZE(invariant_sys_regs); i++) {
-		if (put_user(sys_reg_to_index(&invariant_sys_regs[i]), uindices))
-			return -EFAULT;
-		uindices++;
-	}
-
 	err = walk_sys_regs(vcpu, uindices);
 	if (err < 0)
 		return err;
@@ -4897,80 +5595,18 @@ void kvm_calculate_traps(struct kvm_vcpu *vcpu)
 	mutex_lock(&kvm->arch.config_lock);
 	vcpu_set_hcr(vcpu);
 	vcpu_set_ich_hcr(vcpu);
-
-	if (cpus_have_final_cap(ARM64_HAS_HCX)) {
-		/*
-		 * In general, all HCRX_EL2 bits are gated by a feature.
-		 * The only reason we can set SMPME without checking any
-		 * feature is that its effects are not directly observable
-		 * from the guest.
-		 */
-		vcpu->arch.hcrx_el2 = HCRX_EL2_SMPME;
-
-		if (kvm_has_feat(kvm, ID_AA64ISAR2_EL1, MOPS, IMP))
-			vcpu->arch.hcrx_el2 |= (HCRX_EL2_MSCEn | HCRX_EL2_MCE2);
-
-		if (kvm_has_tcr2(kvm))
-			vcpu->arch.hcrx_el2 |= HCRX_EL2_TCR2En;
-
-		if (kvm_has_fpmr(kvm))
-			vcpu->arch.hcrx_el2 |= HCRX_EL2_EnFPM;
-	}
+	vcpu_set_hcrx(vcpu);
 
 	if (test_bit(KVM_ARCH_FLAG_FGU_INITIALIZED, &kvm->arch.flags))
 		goto out;
 
-	kvm->arch.fgu[HFGxTR_GROUP] = (HFGxTR_EL2_nAMAIR2_EL1		|
-				       HFGxTR_EL2_nMAIR2_EL1		|
-				       HFGxTR_EL2_nS2POR_EL1		|
-				       HFGxTR_EL2_nACCDATA_EL1		|
-				       HFGxTR_EL2_nSMPRI_EL1_MASK	|
-				       HFGxTR_EL2_nTPIDR2_EL0_MASK);
-
-	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TLB, OS))
-		kvm->arch.fgu[HFGITR_GROUP] |= (HFGITR_EL2_TLBIRVAALE1OS|
-						HFGITR_EL2_TLBIRVALE1OS	|
-						HFGITR_EL2_TLBIRVAAE1OS	|
-						HFGITR_EL2_TLBIRVAE1OS	|
-						HFGITR_EL2_TLBIVAALE1OS	|
-						HFGITR_EL2_TLBIVALE1OS	|
-						HFGITR_EL2_TLBIVAAE1OS	|
-						HFGITR_EL2_TLBIASIDE1OS	|
-						HFGITR_EL2_TLBIVAE1OS	|
-						HFGITR_EL2_TLBIVMALLE1OS);
-
-	if (!kvm_has_feat(kvm, ID_AA64ISAR0_EL1, TLB, RANGE))
-		kvm->arch.fgu[HFGITR_GROUP] |= (HFGITR_EL2_TLBIRVAALE1	|
-						HFGITR_EL2_TLBIRVALE1	|
-						HFGITR_EL2_TLBIRVAAE1	|
-						HFGITR_EL2_TLBIRVAE1	|
-						HFGITR_EL2_TLBIRVAALE1IS|
-						HFGITR_EL2_TLBIRVALE1IS	|
-						HFGITR_EL2_TLBIRVAAE1IS	|
-						HFGITR_EL2_TLBIRVAE1IS	|
-						HFGITR_EL2_TLBIRVAALE1OS|
-						HFGITR_EL2_TLBIRVALE1OS	|
-						HFGITR_EL2_TLBIRVAAE1OS	|
-						HFGITR_EL2_TLBIRVAE1OS);
-
-	if (!kvm_has_feat(kvm, ID_AA64ISAR2_EL1, ATS1A, IMP))
-		kvm->arch.fgu[HFGITR_GROUP] |= HFGITR_EL2_ATS1E1A;
-
-	if (!kvm_has_feat(kvm, ID_AA64MMFR1_EL1, PAN, PAN2))
-		kvm->arch.fgu[HFGITR_GROUP] |= (HFGITR_EL2_ATS1E1RP |
-						HFGITR_EL2_ATS1E1WP);
-
-	if (!kvm_has_s1pie(kvm))
-		kvm->arch.fgu[HFGxTR_GROUP] |= (HFGxTR_EL2_nPIRE0_EL1 |
-						HFGxTR_EL2_nPIR_EL1);
-
-	if (!kvm_has_s1poe(kvm))
-		kvm->arch.fgu[HFGxTR_GROUP] |= (HFGxTR_EL2_nPOR_EL1 |
-						HFGxTR_EL2_nPOR_EL0);
-
-	if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, AMU, IMP))
-		kvm->arch.fgu[HAFGRTR_GROUP] |= ~(HAFGRTR_EL2_RES0 |
-						  HAFGRTR_EL2_RES1);
+	compute_fgu(kvm, HFGRTR_GROUP);
+	compute_fgu(kvm, HFGITR_GROUP);
+	compute_fgu(kvm, HDFGRTR_GROUP);
+	compute_fgu(kvm, HAFGRTR_GROUP);
+	compute_fgu(kvm, HFGRTR2_GROUP);
+	compute_fgu(kvm, HFGITR2_GROUP);
+	compute_fgu(kvm, HDFGRTR2_GROUP);
 
 	set_bit(KVM_ARCH_FLAG_FGU_INITIALIZED, &kvm->arch.flags);
 out:
@@ -4991,15 +5627,21 @@ int kvm_finalize_sys_regs(struct kvm_vcpu *vcpu)
 
 	guard(mutex)(&kvm->arch.config_lock);
 
-	if (!(static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif) &&
-	      irqchip_in_kernel(kvm) &&
-	      kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3)) {
-		kvm->arch.id_regs[IDREG_IDX(SYS_ID_AA64PFR0_EL1)] &= ~ID_AA64PFR0_EL1_GIC_MASK;
-		kvm->arch.id_regs[IDREG_IDX(SYS_ID_PFR1_EL1)] &= ~ID_PFR1_EL1_GIC_MASK;
+	/*
+	 * This hacks into the ID registers, so only perform it when the
+	 * first vcpu runs, or the kvm_set_vm_id_reg() helper will scream.
+	 */
+	if (!irqchip_in_kernel(kvm) && !kvm_vm_has_ran_once(kvm)) {
+		u64 val;
+
+		val = kvm_read_vm_id_reg(kvm, SYS_ID_AA64PFR0_EL1) & ~ID_AA64PFR0_EL1_GIC;
+		kvm_set_vm_id_reg(kvm, SYS_ID_AA64PFR0_EL1, val);
+		val = kvm_read_vm_id_reg(kvm, SYS_ID_PFR1_EL1) & ~ID_PFR1_EL1_GIC;
+		kvm_set_vm_id_reg(kvm, SYS_ID_PFR1_EL1, val);
 	}
 
 	if (vcpu_has_nv(vcpu)) {
-		int ret = kvm_init_nv_sysregs(kvm);
+		int ret = kvm_init_nv_sysregs(vcpu);
 		if (ret)
 			return ret;
 	}
@@ -5009,28 +5651,31 @@ int kvm_finalize_sys_regs(struct kvm_vcpu *vcpu)
 
 int __init kvm_sys_reg_table_init(void)
 {
+	const struct sys_reg_desc *gicv3_regs;
 	bool valid = true;
-	unsigned int i;
+	unsigned int i, sz;
 	int ret = 0;
 
 	/* Make sure tables are unique and in order. */
-	valid &= check_sysreg_table(sys_reg_descs, ARRAY_SIZE(sys_reg_descs), false);
-	valid &= check_sysreg_table(cp14_regs, ARRAY_SIZE(cp14_regs), true);
-	valid &= check_sysreg_table(cp14_64_regs, ARRAY_SIZE(cp14_64_regs), true);
-	valid &= check_sysreg_table(cp15_regs, ARRAY_SIZE(cp15_regs), true);
-	valid &= check_sysreg_table(cp15_64_regs, ARRAY_SIZE(cp15_64_regs), true);
-	valid &= check_sysreg_table(invariant_sys_regs, ARRAY_SIZE(invariant_sys_regs), false);
+	valid &= check_sysreg_table(sys_reg_descs, ARRAY_SIZE(sys_reg_descs), true);
+	valid &= check_sysreg_table(cp14_regs, ARRAY_SIZE(cp14_regs), false);
+	valid &= check_sysreg_table(cp14_64_regs, ARRAY_SIZE(cp14_64_regs), false);
+	valid &= check_sysreg_table(cp15_regs, ARRAY_SIZE(cp15_regs), false);
+	valid &= check_sysreg_table(cp15_64_regs, ARRAY_SIZE(cp15_64_regs), false);
 	valid &= check_sysreg_table(sys_insn_descs, ARRAY_SIZE(sys_insn_descs), false);
 
+	gicv3_regs = vgic_v3_get_sysreg_table(&sz);
+	valid &= check_sysreg_table(gicv3_regs, sz, false);
+
 	if (!valid)
 		return -EINVAL;
 
-	/* We abuse the reset function to overwrite the table itself. */
-	for (i = 0; i < ARRAY_SIZE(invariant_sys_regs); i++)
-		invariant_sys_regs[i].reset(NULL, &invariant_sys_regs[i]);
+	init_imp_id_regs();
 
 	ret = populate_nv_trap_config();
 
+	check_feature_map();
+
 	for (i = 0; !ret && i < ARRAY_SIZE(sys_reg_descs); i++)
 		ret = populate_sysreg_config(sys_reg_descs + i, i);
 
diff --git a/arch/arm64/kvm/sys_regs.h b/arch/arm64/kvm/sys_regs.h
index 1d94ed6efad2..b3f904472fac 100644
--- a/arch/arm64/kvm/sys_regs.h
+++ b/arch/arm64/kvm/sys_regs.h
@@ -108,7 +108,7 @@ inline void print_sys_reg_msg(const struct sys_reg_params *p,
 	/* Look, we even formatted it for you to paste into the table! */
 	kvm_pr_unimpl("%pV { Op0(%2u), Op1(%2u), CRn(%2u), CRm(%2u), Op2(%2u), func_%s },\n",
 		      &(struct va_format){ fmt, &va },
-		      p->Op0, p->Op1, p->CRn, p->CRm, p->Op2, p->is_write ? "write" : "read");
+		      p->Op0, p->Op1, p->CRn, p->CRm, p->Op2, str_write_read(p->is_write));
 	va_end(va);
 }
 
@@ -137,7 +137,7 @@ static inline u64 reset_unknown(struct kvm_vcpu *vcpu,
 {
 	BUG_ON(!r->reg);
 	BUG_ON(r->reg >= NR_SYS_REGS);
-	__vcpu_sys_reg(vcpu, r->reg) = 0x1de7ec7edbadc0deULL;
+	__vcpu_assign_sys_reg(vcpu, r->reg, 0x1de7ec7edbadc0deULL);
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
 
@@ -145,7 +145,7 @@ static inline u64 reset_val(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	BUG_ON(!r->reg);
 	BUG_ON(r->reg >= NR_SYS_REGS);
-	__vcpu_sys_reg(vcpu, r->reg) = r->val;
+	__vcpu_assign_sys_reg(vcpu, r->reg, r->val);
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
 
@@ -247,4 +247,20 @@ int kvm_finalize_sys_regs(struct kvm_vcpu *vcpu);
 	CRn(sys_reg_CRn(reg)), CRm(sys_reg_CRm(reg)),	\
 	Op2(sys_reg_Op2(reg))
 
+#define ID_REG_LIMIT_FIELD_ENUM(val, reg, field, limit)			       \
+({									       \
+	u64 __f_val = FIELD_GET(reg##_##field##_MASK, val);		       \
+	(val) &= ~reg##_##field##_MASK;					       \
+	(val) |= FIELD_PREP(reg##_##field##_MASK,			       \
+			    min(__f_val,				       \
+				(u64)SYS_FIELD_VALUE(reg, field, limit)));     \
+	(val);								       \
+})
+
+#define TO_ARM64_SYS_REG(r)	ARM64_SYS_REG(sys_reg_Op0(SYS_ ## r),	\
+					      sys_reg_Op1(SYS_ ## r),	\
+					      sys_reg_CRn(SYS_ ## r),	\
+					      sys_reg_CRm(SYS_ ## r),	\
+					      sys_reg_Op2(SYS_ ## r))
+
 #endif /* __ARM64_KVM_SYS_REGS_LOCAL_H__ */
diff --git a/arch/arm64/kvm/trace_arm.h b/arch/arm64/kvm/trace_arm.h
index c18c1a95831e..9c60f6465c78 100644
--- a/arch/arm64/kvm/trace_arm.h
+++ b/arch/arm64/kvm/trace_arm.h
@@ -176,7 +176,7 @@ TRACE_EVENT(kvm_set_way_flush,
 	    ),
 
 	    TP_printk("S/W flush at 0x%016lx (cache %s)",
-		      __entry->vcpu_pc, __entry->cache ? "on" : "off")
+		      __entry->vcpu_pc, str_on_off(__entry->cache))
 );
 
 TRACE_EVENT(kvm_toggle_cache,
@@ -196,8 +196,8 @@ TRACE_EVENT(kvm_toggle_cache,
 	    ),
 
 	    TP_printk("VM op at 0x%016lx (cache was %s, now %s)",
-		      __entry->vcpu_pc, __entry->was ? "on" : "off",
-		      __entry->now ? "on" : "off")
+		      __entry->vcpu_pc, str_on_off(__entry->was),
+		      str_on_off(__entry->now))
 );
 
 /*
diff --git a/arch/arm64/kvm/trace_handle_exit.h b/arch/arm64/kvm/trace_handle_exit.h
index 064a58c19f48..a7ab9a3bbed0 100644
--- a/arch/arm64/kvm/trace_handle_exit.h
+++ b/arch/arm64/kvm/trace_handle_exit.h
@@ -46,38 +46,6 @@ TRACE_EVENT(kvm_hvc_arm64,
 		  __entry->vcpu_pc, __entry->r0, __entry->imm)
 );
 
-TRACE_EVENT(kvm_arm_setup_debug,
-	TP_PROTO(struct kvm_vcpu *vcpu, __u32 guest_debug),
-	TP_ARGS(vcpu, guest_debug),
-
-	TP_STRUCT__entry(
-		__field(struct kvm_vcpu *, vcpu)
-		__field(__u32, guest_debug)
-	),
-
-	TP_fast_assign(
-		__entry->vcpu = vcpu;
-		__entry->guest_debug = guest_debug;
-	),
-
-	TP_printk("vcpu: %p, flags: 0x%08x", __entry->vcpu, __entry->guest_debug)
-);
-
-TRACE_EVENT(kvm_arm_clear_debug,
-	TP_PROTO(__u32 guest_debug),
-	TP_ARGS(guest_debug),
-
-	TP_STRUCT__entry(
-		__field(__u32, guest_debug)
-	),
-
-	TP_fast_assign(
-		__entry->guest_debug = guest_debug;
-	),
-
-	TP_printk("flags: 0x%08x", __entry->guest_debug)
-);
-
 /*
  * The dreg32 name is a leftover from a distant past. This will really
  * output a 64bit value...
@@ -99,49 +67,6 @@ TRACE_EVENT(kvm_arm_set_dreg32,
 	TP_printk("%s: 0x%llx", __entry->name, __entry->value)
 );
 
-TRACE_DEFINE_SIZEOF(__u64);
-
-TRACE_EVENT(kvm_arm_set_regset,
-	TP_PROTO(const char *type, int len, __u64 *control, __u64 *value),
-	TP_ARGS(type, len, control, value),
-	TP_STRUCT__entry(
-		__field(const char *, name)
-		__field(int, len)
-		__array(u64, ctrls, 16)
-		__array(u64, values, 16)
-	),
-	TP_fast_assign(
-		__entry->name = type;
-		__entry->len = len;
-		memcpy(__entry->ctrls, control, len << 3);
-		memcpy(__entry->values, value, len << 3);
-	),
-	TP_printk("%d %s CTRL:%s VALUE:%s", __entry->len, __entry->name,
-		__print_array(__entry->ctrls, __entry->len, sizeof(__u64)),
-		__print_array(__entry->values, __entry->len, sizeof(__u64)))
-);
-
-TRACE_EVENT(trap_reg,
-	TP_PROTO(const char *fn, int reg, bool is_write, u64 write_value),
-	TP_ARGS(fn, reg, is_write, write_value),
-
-	TP_STRUCT__entry(
-		__field(const char *, fn)
-		__field(int, reg)
-		__field(bool, is_write)
-		__field(u64, write_value)
-	),
-
-	TP_fast_assign(
-		__entry->fn = fn;
-		__entry->reg = reg;
-		__entry->is_write = is_write;
-		__entry->write_value = write_value;
-	),
-
-	TP_printk("%s %s reg %d (0x%016llx)", __entry->fn,  __entry->is_write?"write to":"read from", __entry->reg, __entry->write_value)
-);
-
 TRACE_EVENT(kvm_handle_sys_reg,
 	TP_PROTO(unsigned long hsr),
 	TP_ARGS(hsr),
@@ -188,7 +113,7 @@ TRACE_EVENT(kvm_sys_access,
 		  __entry->vcpu_pc, __entry->name ?: "UNKN",
 		  __entry->Op0, __entry->Op1, __entry->CRn,
 		  __entry->CRm, __entry->Op2,
-		  __entry->is_write ? "write" : "read")
+		  str_write_read(__entry->is_write))
 );
 
 TRACE_EVENT(kvm_set_guest_debug,
diff --git a/arch/arm64/kvm/vgic-sys-reg-v3.c b/arch/arm64/kvm/vgic-sys-reg-v3.c
index 9e7c486b48c2..bdc2d57370b2 100644
--- a/arch/arm64/kvm/vgic-sys-reg-v3.c
+++ b/arch/arm64/kvm/vgic-sys-reg-v3.c
@@ -35,12 +35,12 @@ static int set_gic_ctlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 
 	vgic_v3_cpu->num_id_bits = host_id_bits;
 
-	host_seis = FIELD_GET(ICH_VTR_SEIS_MASK, kvm_vgic_global_state.ich_vtr_el2);
+	host_seis = FIELD_GET(ICH_VTR_EL2_SEIS, kvm_vgic_global_state.ich_vtr_el2);
 	seis = FIELD_GET(ICC_CTLR_EL1_SEIS_MASK, val);
 	if (host_seis != seis)
 		return -EINVAL;
 
-	host_a3v = FIELD_GET(ICH_VTR_A3V_MASK, kvm_vgic_global_state.ich_vtr_el2);
+	host_a3v = FIELD_GET(ICH_VTR_EL2_A3V, kvm_vgic_global_state.ich_vtr_el2);
 	a3v = FIELD_GET(ICC_CTLR_EL1_A3V_MASK, val);
 	if (host_a3v != a3v)
 		return -EINVAL;
@@ -68,10 +68,10 @@ static int get_gic_ctlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 	val |= FIELD_PREP(ICC_CTLR_EL1_PRI_BITS_MASK, vgic_v3_cpu->num_pri_bits - 1);
 	val |= FIELD_PREP(ICC_CTLR_EL1_ID_BITS_MASK, vgic_v3_cpu->num_id_bits);
 	val |= FIELD_PREP(ICC_CTLR_EL1_SEIS_MASK,
-			  FIELD_GET(ICH_VTR_SEIS_MASK,
+			  FIELD_GET(ICH_VTR_EL2_SEIS,
 				    kvm_vgic_global_state.ich_vtr_el2));
 	val |= FIELD_PREP(ICC_CTLR_EL1_A3V_MASK,
-			  FIELD_GET(ICH_VTR_A3V_MASK, kvm_vgic_global_state.ich_vtr_el2));
+			  FIELD_GET(ICH_VTR_EL2_A3V, kvm_vgic_global_state.ich_vtr_el2));
 	/*
 	 * The VMCR.CTLR value is in ICC_CTLR_EL1 layout.
 	 * Extract it directly using ICC_CTLR_EL1 reg definitions.
@@ -297,6 +297,91 @@ static int get_gic_sre(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
 	return 0;
 }
 
+static int set_gic_ich_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			   u64 val)
+{
+	__vcpu_assign_sys_reg(vcpu, r->reg, val);
+	return 0;
+}
+
+static int get_gic_ich_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			    u64 *val)
+{
+	*val = __vcpu_sys_reg(vcpu, r->reg);
+	return 0;
+}
+
+static int set_gic_ich_apr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			   u64 val)
+{
+	u8 idx = r->Op2 & 3;
+
+	if (idx > vgic_v3_max_apr_idx(vcpu))
+		return -EINVAL;
+
+	return set_gic_ich_reg(vcpu, r, val);
+}
+
+static int get_gic_ich_apr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			    u64 *val)
+{
+	u8 idx = r->Op2 & 3;
+
+	if (idx > vgic_v3_max_apr_idx(vcpu))
+		return -EINVAL;
+
+	return get_gic_ich_reg(vcpu, r, val);
+}
+
+static int set_gic_icc_sre(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			   u64 val)
+{
+	if (val != KVM_ICC_SRE_EL2)
+		return -EINVAL;
+	return 0;
+}
+
+static int get_gic_icc_sre(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			   u64 *val)
+{
+	*val = KVM_ICC_SRE_EL2;
+	return 0;
+}
+
+static int set_gic_ich_vtr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			   u64 val)
+{
+	if (val != kvm_get_guest_vtr_el2())
+		return -EINVAL;
+	return 0;
+}
+
+static int get_gic_ich_vtr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			   u64 *val)
+{
+	*val = kvm_get_guest_vtr_el2();
+	return 0;
+}
+
+static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
+				   const struct sys_reg_desc *rd)
+{
+	return vcpu_has_nv(vcpu) ? 0 : REG_HIDDEN;
+}
+
+#define __EL2_REG(r, acc, i)			\
+	{					\
+		SYS_DESC(SYS_ ## r),		\
+		.get_user = get_gic_ ## acc,	\
+		.set_user = set_gic_ ## acc,	\
+		.reg = i,			\
+		.visibility = el2_visibility,	\
+	}
+
+#define EL2_REG(r, acc)		__EL2_REG(r, acc, r)
+
+#define EL2_REG_RO(r, acc)	__EL2_REG(r, acc, 0)
+
 static const struct sys_reg_desc gic_v3_icc_reg_descs[] = {
 	{ SYS_DESC(SYS_ICC_PMR_EL1),
 	  .set_user = set_gic_pmr, .get_user = get_gic_pmr, },
@@ -328,8 +413,42 @@ static const struct sys_reg_desc gic_v3_icc_reg_descs[] = {
 	  .set_user = set_gic_grpen0, .get_user = get_gic_grpen0, },
 	{ SYS_DESC(SYS_ICC_IGRPEN1_EL1),
 	  .set_user = set_gic_grpen1, .get_user = get_gic_grpen1, },
+	EL2_REG(ICH_AP0R0_EL2, ich_apr),
+	EL2_REG(ICH_AP0R1_EL2, ich_apr),
+	EL2_REG(ICH_AP0R2_EL2, ich_apr),
+	EL2_REG(ICH_AP0R3_EL2, ich_apr),
+	EL2_REG(ICH_AP1R0_EL2, ich_apr),
+	EL2_REG(ICH_AP1R1_EL2, ich_apr),
+	EL2_REG(ICH_AP1R2_EL2, ich_apr),
+	EL2_REG(ICH_AP1R3_EL2, ich_apr),
+	EL2_REG_RO(ICC_SRE_EL2, icc_sre),
+	EL2_REG(ICH_HCR_EL2, ich_reg),
+	EL2_REG_RO(ICH_VTR_EL2, ich_vtr),
+	EL2_REG(ICH_VMCR_EL2, ich_reg),
+	EL2_REG(ICH_LR0_EL2, ich_reg),
+	EL2_REG(ICH_LR1_EL2, ich_reg),
+	EL2_REG(ICH_LR2_EL2, ich_reg),
+	EL2_REG(ICH_LR3_EL2, ich_reg),
+	EL2_REG(ICH_LR4_EL2, ich_reg),
+	EL2_REG(ICH_LR5_EL2, ich_reg),
+	EL2_REG(ICH_LR6_EL2, ich_reg),
+	EL2_REG(ICH_LR7_EL2, ich_reg),
+	EL2_REG(ICH_LR8_EL2, ich_reg),
+	EL2_REG(ICH_LR9_EL2, ich_reg),
+	EL2_REG(ICH_LR10_EL2, ich_reg),
+	EL2_REG(ICH_LR11_EL2, ich_reg),
+	EL2_REG(ICH_LR12_EL2, ich_reg),
+	EL2_REG(ICH_LR13_EL2, ich_reg),
+	EL2_REG(ICH_LR14_EL2, ich_reg),
+	EL2_REG(ICH_LR15_EL2, ich_reg),
 };
 
+const struct sys_reg_desc *vgic_v3_get_sysreg_table(unsigned int *sz)
+{
+	*sz = ARRAY_SIZE(gic_v3_icc_reg_descs);
+	return gic_v3_icc_reg_descs;
+}
+
 static u64 attr_to_id(u64 attr)
 {
 	return ARM64_SYS_REG(FIELD_GET(KVM_REG_ARM_VGIC_SYSREG_OP0_MASK, attr),
@@ -341,8 +460,12 @@ static u64 attr_to_id(u64 attr)
 
 int vgic_v3_has_cpu_sysregs_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 {
-	if (get_reg_by_id(attr_to_id(attr->attr), gic_v3_icc_reg_descs,
-			  ARRAY_SIZE(gic_v3_icc_reg_descs)))
+	const struct sys_reg_desc *r;
+
+	r = get_reg_by_id(attr_to_id(attr->attr), gic_v3_icc_reg_descs,
+			  ARRAY_SIZE(gic_v3_icc_reg_descs));
+
+	if (r && !sysreg_hidden(vcpu, r))
 		return 0;
 
 	return -ENXIO;
diff --git a/arch/arm64/kvm/vgic/vgic-debug.c b/arch/arm64/kvm/vgic/vgic-debug.c
index afb018528bc3..bb92853d1fd3 100644
--- a/arch/arm64/kvm/vgic/vgic-debug.c
+++ b/arch/arm64/kvm/vgic/vgic-debug.c
@@ -64,29 +64,37 @@ static void iter_next(struct kvm *kvm, struct vgic_state_iter *iter)
 static int iter_mark_lpis(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
+	unsigned long intid, flags;
 	struct vgic_irq *irq;
-	unsigned long intid;
 	int nr_lpis = 0;
 
+	xa_lock_irqsave(&dist->lpi_xa, flags);
+
 	xa_for_each(&dist->lpi_xa, intid, irq) {
-		if (!vgic_try_get_irq_kref(irq))
+		if (!vgic_try_get_irq_ref(irq))
 			continue;
 
-		xa_set_mark(&dist->lpi_xa, intid, LPI_XA_MARK_DEBUG_ITER);
+		__xa_set_mark(&dist->lpi_xa, intid, LPI_XA_MARK_DEBUG_ITER);
 		nr_lpis++;
 	}
 
+	xa_unlock_irqrestore(&dist->lpi_xa, flags);
+
 	return nr_lpis;
 }
 
 static void iter_unmark_lpis(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
+	unsigned long intid, flags;
 	struct vgic_irq *irq;
-	unsigned long intid;
 
 	xa_for_each_marked(&dist->lpi_xa, intid, irq, LPI_XA_MARK_DEBUG_ITER) {
-		xa_clear_mark(&dist->lpi_xa, intid, LPI_XA_MARK_DEBUG_ITER);
+		xa_lock_irqsave(&dist->lpi_xa, flags);
+		__xa_clear_mark(&dist->lpi_xa, intid, LPI_XA_MARK_DEBUG_ITER);
+		xa_unlock_irqrestore(&dist->lpi_xa, flags);
+
+		/* vgic_put_irq() expects to be called outside of the xa_lock */
 		vgic_put_irq(kvm, irq);
 	}
 }
@@ -320,3 +328,230 @@ void vgic_debug_init(struct kvm *kvm)
 void vgic_debug_destroy(struct kvm *kvm)
 {
 }
+
+/**
+ * struct vgic_its_iter - Iterator for traversing VGIC ITS device tables.
+ * @dev: Pointer to the current its_device being processed.
+ * @ite: Pointer to the current its_ite within the device being processed.
+ *
+ * This structure is used to maintain the current position during iteration
+ * over the ITS device tables. It holds pointers to both the current device
+ * and the current ITE within that device.
+ */
+struct vgic_its_iter {
+	struct its_device *dev;
+	struct its_ite *ite;
+};
+
+/**
+ * end_of_iter - Checks if the iterator has reached the end.
+ * @iter: The iterator to check.
+ *
+ * When the iterator completed processing the final ITE in the last device
+ * table, it was marked to indicate the end of iteration by setting its
+ * device and ITE pointers to NULL.
+ * This function checks whether the iterator was marked as end.
+ *
+ * Return: True if the iterator is marked as end, false otherwise.
+ */
+static inline bool end_of_iter(struct vgic_its_iter *iter)
+{
+	return !iter->dev && !iter->ite;
+}
+
+/**
+ * vgic_its_iter_next - Advances the iterator to the next entry in the ITS tables.
+ * @its: The VGIC ITS structure.
+ * @iter: The iterator to advance.
+ *
+ * This function moves the iterator to the next ITE within the current device,
+ * or to the first ITE of the next device if the current ITE is the last in
+ * the device. If the current device is the last device, the iterator is set
+ * to indicate the end of iteration.
+ */
+static void vgic_its_iter_next(struct vgic_its *its, struct vgic_its_iter *iter)
+{
+	struct its_device *dev = iter->dev;
+	struct its_ite *ite = iter->ite;
+
+	if (!ite || list_is_last(&ite->ite_list, &dev->itt_head)) {
+		if (list_is_last(&dev->dev_list, &its->device_list)) {
+			dev = NULL;
+			ite = NULL;
+		} else {
+			dev = list_next_entry(dev, dev_list);
+			ite = list_first_entry_or_null(&dev->itt_head,
+						       struct its_ite,
+						       ite_list);
+		}
+	} else {
+		ite = list_next_entry(ite, ite_list);
+	}
+
+	iter->dev = dev;
+	iter->ite = ite;
+}
+
+/**
+ * vgic_its_debug_start - Start function for the seq_file interface.
+ * @s: The seq_file structure.
+ * @pos: The starting position (offset).
+ *
+ * This function initializes the iterator to the beginning of the ITS tables
+ * and advances it to the specified position. It acquires the its_lock mutex
+ * to protect shared data.
+ *
+ * Return: An iterator pointer on success, NULL if no devices are found or
+ *         the end of the list is reached, or ERR_PTR(-ENOMEM) on memory
+ *         allocation failure.
+ */
+static void *vgic_its_debug_start(struct seq_file *s, loff_t *pos)
+{
+	struct vgic_its *its = s->private;
+	struct vgic_its_iter *iter;
+	struct its_device *dev;
+	loff_t offset = *pos;
+
+	mutex_lock(&its->its_lock);
+
+	dev = list_first_entry_or_null(&its->device_list,
+				       struct its_device, dev_list);
+	if (!dev)
+		return NULL;
+
+	iter = kmalloc(sizeof(*iter), GFP_KERNEL);
+	if (!iter)
+		return ERR_PTR(-ENOMEM);
+
+	iter->dev = dev;
+	iter->ite = list_first_entry_or_null(&dev->itt_head,
+					     struct its_ite, ite_list);
+
+	while (!end_of_iter(iter) && offset--)
+		vgic_its_iter_next(its, iter);
+
+	if (end_of_iter(iter)) {
+		kfree(iter);
+		return NULL;
+	}
+
+	return iter;
+}
+
+/**
+ * vgic_its_debug_next - Next function for the seq_file interface.
+ * @s: The seq_file structure.
+ * @v: The current iterator.
+ * @pos: The current position (offset).
+ *
+ * This function advances the iterator to the next entry and increments the
+ * position.
+ *
+ * Return: An iterator pointer on success, or NULL if the end of the list is
+ *         reached.
+ */
+static void *vgic_its_debug_next(struct seq_file *s, void *v, loff_t *pos)
+{
+	struct vgic_its *its = s->private;
+	struct vgic_its_iter *iter = v;
+
+	++*pos;
+	vgic_its_iter_next(its, iter);
+
+	if (end_of_iter(iter)) {
+		kfree(iter);
+		return NULL;
+	}
+	return iter;
+}
+
+/**
+ * vgic_its_debug_stop - Stop function for the seq_file interface.
+ * @s: The seq_file structure.
+ * @v: The current iterator.
+ *
+ * This function frees the iterator and releases the its_lock mutex.
+ */
+static void vgic_its_debug_stop(struct seq_file *s, void *v)
+{
+	struct vgic_its *its = s->private;
+	struct vgic_its_iter *iter = v;
+
+	if (!IS_ERR_OR_NULL(iter))
+		kfree(iter);
+	mutex_unlock(&its->its_lock);
+}
+
+/**
+ * vgic_its_debug_show - Show function for the seq_file interface.
+ * @s: The seq_file structure.
+ * @v: The current iterator.
+ *
+ * This function formats and prints the ITS table entry information to the
+ * seq_file output.
+ *
+ * Return: 0 on success.
+ */
+static int vgic_its_debug_show(struct seq_file *s, void *v)
+{
+	struct vgic_its_iter *iter = v;
+	struct its_device *dev = iter->dev;
+	struct its_ite *ite = iter->ite;
+
+	if (!ite)
+		return 0;
+
+	if (list_is_first(&ite->ite_list, &dev->itt_head)) {
+		seq_printf(s, "\n");
+		seq_printf(s, "Device ID: 0x%x, Event ID Range: [0 - %llu]\n",
+			   dev->device_id, BIT_ULL(dev->num_eventid_bits) - 1);
+		seq_printf(s, "EVENT_ID    INTID  HWINTID   TARGET   COL_ID HW\n");
+		seq_printf(s, "-----------------------------------------------\n");
+	}
+
+	if (ite->irq && ite->collection) {
+		seq_printf(s, "%8u %8u %8u %8u %8u %2d\n",
+			   ite->event_id, ite->irq->intid, ite->irq->hwintid,
+			   ite->collection->target_addr,
+			   ite->collection->collection_id, ite->irq->hw);
+	}
+
+	return 0;
+}
+
+static const struct seq_operations vgic_its_debug_sops = {
+	.start = vgic_its_debug_start,
+	.next  = vgic_its_debug_next,
+	.stop  = vgic_its_debug_stop,
+	.show  = vgic_its_debug_show
+};
+
+DEFINE_SEQ_ATTRIBUTE(vgic_its_debug);
+
+/**
+ * vgic_its_debug_init - Initializes the debugfs interface for VGIC ITS.
+ * @dev: The KVM device structure.
+ *
+ * This function creates a debugfs file named "vgic-its-state@%its_base"
+ * to expose the ITS table information.
+ *
+ * Return: 0 on success.
+ */
+int vgic_its_debug_init(struct kvm_device *dev)
+{
+	struct vgic_its *its = dev->private;
+	char *name;
+
+	name = kasprintf(GFP_KERNEL, "vgic-its-state@%llx", (u64)its->vgic_its_base);
+	if (!name)
+		return -ENOMEM;
+
+	debugfs_create_file(name, 0444, dev->kvm->debugfs_dentry, its, &vgic_its_debug_fops);
+
+	kfree(name);
+	return 0;
+}
+
+void vgic_its_debug_destroy(struct kvm_device *dev)
+{
+}
diff --git a/arch/arm64/kvm/vgic/vgic-init.c b/arch/arm64/kvm/vgic/vgic-init.c
index bc7e22ab5d81..dc9f9db31026 100644
--- a/arch/arm64/kvm/vgic/vgic-init.c
+++ b/arch/arm64/kvm/vgic/vgic-init.c
@@ -34,9 +34,9 @@
  *
  * CPU Interface:
  *
- * - kvm_vgic_vcpu_init(): initialization of static data that
- *   doesn't depend on any sizing information or emulation type. No
- *   allocation is allowed there.
+ * - kvm_vgic_vcpu_init(): initialization of static data that doesn't depend
+ *   on any sizing information. Private interrupts are allocated if not
+ *   already allocated at vgic-creation time.
  */
 
 /* EARLY INIT */
@@ -58,6 +58,8 @@ void kvm_vgic_early_init(struct kvm *kvm)
 
 /* CREATION */
 
+static int vgic_allocate_private_irqs_locked(struct kvm_vcpu *vcpu, u32 type);
+
 /**
  * kvm_vgic_create: triggered by the instantiation of the VGIC device by
  * user space, either through the legacy KVM_CREATE_IRQCHIP ioctl (v2 only)
@@ -69,6 +71,7 @@ void kvm_vgic_early_init(struct kvm *kvm)
 int kvm_vgic_create(struct kvm *kvm, u32 type)
 {
 	struct kvm_vcpu *vcpu;
+	u64 aa64pfr0, pfr1;
 	unsigned long i;
 	int ret;
 
@@ -82,15 +85,40 @@ int kvm_vgic_create(struct kvm *kvm, u32 type)
 		!kvm_vgic_global_state.can_emulate_gicv2)
 		return -ENODEV;
 
-	/* Must be held to avoid race with vCPU creation */
+	/*
+	 * Ensure mutual exclusion with vCPU creation and any vCPU ioctls by:
+	 *
+	 *  - Holding kvm->lock to prevent KVM_CREATE_VCPU from reaching
+	 *    kvm_arch_vcpu_precreate() and ensuring created_vcpus is stable.
+	 *    This alone is insufficient, as kvm_vm_ioctl_create_vcpu() drops
+	 *    the kvm->lock before completing the vCPU creation.
+	 */
 	lockdep_assert_held(&kvm->lock);
 
+	/*
+	 *  - Acquiring the vCPU mutex for every *online* vCPU to prevent
+	 *    concurrent vCPU ioctls for vCPUs already visible to userspace.
+	 */
 	ret = -EBUSY;
-	if (!lock_all_vcpus(kvm))
+	if (kvm_trylock_all_vcpus(kvm))
 		return ret;
 
+	/*
+	 *  - Taking the config_lock which protects VGIC data structures such
+	 *    as the per-vCPU arrays of private IRQs (SGIs, PPIs).
+	 */
 	mutex_lock(&kvm->arch.config_lock);
 
+	/*
+	 * - Bailing on the entire thing if a vCPU is in the middle of creation,
+	 *   dropped the kvm->lock, but hasn't reached kvm_arch_vcpu_create().
+	 *
+	 * The whole combination of this guarantees that no vCPU can get into
+	 * KVM with a VGIC configuration inconsistent with the VM's VGIC.
+	 */
+	if (kvm->created_vcpus != atomic_read(&kvm->online_vcpus))
+		goto out_unlock;
+
 	if (irqchip_in_kernel(kvm)) {
 		ret = -EEXIST;
 		goto out_unlock;
@@ -112,19 +140,48 @@ int kvm_vgic_create(struct kvm *kvm, u32 type)
 		goto out_unlock;
 	}
 
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		ret = vgic_allocate_private_irqs_locked(vcpu, type);
+		if (ret)
+			break;
+	}
+
+	if (ret) {
+		kvm_for_each_vcpu(i, vcpu, kvm) {
+			struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+			kfree(vgic_cpu->private_irqs);
+			vgic_cpu->private_irqs = NULL;
+		}
+
+		goto out_unlock;
+	}
+
 	kvm->arch.vgic.in_kernel = true;
 	kvm->arch.vgic.vgic_model = type;
+	kvm->arch.vgic.implementation_rev = KVM_VGIC_IMP_REV_LATEST;
 
 	kvm->arch.vgic.vgic_dist_base = VGIC_ADDR_UNDEF;
 
-	if (type == KVM_DEV_TYPE_ARM_VGIC_V2)
+	aa64pfr0 = kvm_read_vm_id_reg(kvm, SYS_ID_AA64PFR0_EL1) & ~ID_AA64PFR0_EL1_GIC;
+	pfr1 = kvm_read_vm_id_reg(kvm, SYS_ID_PFR1_EL1) & ~ID_PFR1_EL1_GIC;
+
+	if (type == KVM_DEV_TYPE_ARM_VGIC_V2) {
 		kvm->arch.vgic.vgic_cpu_base = VGIC_ADDR_UNDEF;
-	else
+	} else {
 		INIT_LIST_HEAD(&kvm->arch.vgic.rd_regions);
+		aa64pfr0 |= SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, GIC, IMP);
+		pfr1 |= SYS_FIELD_PREP_ENUM(ID_PFR1_EL1, GIC, GICv3);
+	}
+
+	kvm_set_vm_id_reg(kvm, SYS_ID_AA64PFR0_EL1, aa64pfr0);
+	kvm_set_vm_id_reg(kvm, SYS_ID_PFR1_EL1, pfr1);
+
+	if (type == KVM_DEV_TYPE_ARM_VGIC_V3)
+		kvm->arch.vgic.nassgicap = system_supports_direct_sgis();
 
 out_unlock:
 	mutex_unlock(&kvm->arch.config_lock);
-	unlock_all_vcpus(kvm);
+	kvm_unlock_all_vcpus(kvm);
 	return ret;
 }
 
@@ -141,6 +198,7 @@ static int kvm_vgic_dist_init(struct kvm *kvm, unsigned int nr_spis)
 	struct kvm_vcpu *vcpu0 = kvm_get_vcpu(kvm, 0);
 	int i;
 
+	dist->active_spis = (atomic_t)ATOMIC_INIT(0);
 	dist->spis = kcalloc(nr_spis, sizeof(struct vgic_irq), GFP_KERNEL_ACCOUNT);
 	if (!dist->spis)
 		return  -ENOMEM;
@@ -161,7 +219,7 @@ static int kvm_vgic_dist_init(struct kvm *kvm, unsigned int nr_spis)
 		raw_spin_lock_init(&irq->irq_lock);
 		irq->vcpu = NULL;
 		irq->target_vcpu = vcpu0;
-		kref_init(&irq->refcount);
+		refcount_set(&irq->refcount, 0);
 		switch (dist->vgic_model) {
 		case KVM_DEV_TYPE_ARM_VGIC_V2:
 			irq->targets = 0;
@@ -180,7 +238,28 @@ static int kvm_vgic_dist_init(struct kvm *kvm, unsigned int nr_spis)
 	return 0;
 }
 
-static int vgic_allocate_private_irqs_locked(struct kvm_vcpu *vcpu)
+/* Default GICv3 Maintenance Interrupt INTID, as per SBSA */
+#define DEFAULT_MI_INTID	25
+
+int kvm_vgic_vcpu_nv_init(struct kvm_vcpu *vcpu)
+{
+	int ret;
+
+	guard(mutex)(&vcpu->kvm->arch.config_lock);
+
+	/*
+	 * Matching the tradition established with the timers, provide
+	 * a default PPI for the maintenance interrupt. It makes
+	 * things easier to reason about.
+	 */
+	if (vcpu->kvm->arch.vgic.mi_intid == 0)
+		vcpu->kvm->arch.vgic.mi_intid = DEFAULT_MI_INTID;
+	ret = kvm_vgic_set_owner(vcpu, vcpu->kvm->arch.vgic.mi_intid, vcpu);
+
+	return ret;
+}
+
+static int vgic_allocate_private_irqs_locked(struct kvm_vcpu *vcpu, u32 type)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	int i;
@@ -209,7 +288,7 @@ static int vgic_allocate_private_irqs_locked(struct kvm_vcpu *vcpu)
 		irq->intid = i;
 		irq->vcpu = NULL;
 		irq->target_vcpu = vcpu;
-		kref_init(&irq->refcount);
+		refcount_set(&irq->refcount, 0);
 		if (vgic_irq_is_sgi(i)) {
 			/* SGIs */
 			irq->enabled = 1;
@@ -218,17 +297,28 @@ static int vgic_allocate_private_irqs_locked(struct kvm_vcpu *vcpu)
 			/* PPIs */
 			irq->config = VGIC_CONFIG_LEVEL;
 		}
+
+		switch (type) {
+		case KVM_DEV_TYPE_ARM_VGIC_V3:
+			irq->group = 1;
+			irq->mpidr = kvm_vcpu_get_mpidr_aff(vcpu);
+			break;
+		case KVM_DEV_TYPE_ARM_VGIC_V2:
+			irq->group = 0;
+			irq->targets = BIT(vcpu->vcpu_id);
+			break;
+		}
 	}
 
 	return 0;
 }
 
-static int vgic_allocate_private_irqs(struct kvm_vcpu *vcpu)
+static int vgic_allocate_private_irqs(struct kvm_vcpu *vcpu, u32 type)
 {
 	int ret;
 
 	mutex_lock(&vcpu->kvm->arch.config_lock);
-	ret = vgic_allocate_private_irqs_locked(vcpu);
+	ret = vgic_allocate_private_irqs_locked(vcpu, type);
 	mutex_unlock(&vcpu->kvm->arch.config_lock);
 
 	return ret;
@@ -258,7 +348,7 @@ int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu)
 	if (!irqchip_in_kernel(vcpu->kvm))
 		return 0;
 
-	ret = vgic_allocate_private_irqs(vcpu);
+	ret = vgic_allocate_private_irqs(vcpu, dist->vgic_model);
 	if (ret)
 		return ret;
 
@@ -274,12 +364,12 @@ int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu)
 	return ret;
 }
 
-static void kvm_vgic_vcpu_enable(struct kvm_vcpu *vcpu)
+static void kvm_vgic_vcpu_reset(struct kvm_vcpu *vcpu)
 {
 	if (kvm_vgic_global_state.type == VGIC_V2)
-		vgic_v2_enable(vcpu);
+		vgic_v2_reset(vcpu);
 	else
-		vgic_v3_enable(vcpu);
+		vgic_v3_reset(vcpu);
 }
 
 /*
@@ -295,7 +385,7 @@ int vgic_init(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
 	struct kvm_vcpu *vcpu;
-	int ret = 0, i;
+	int ret = 0;
 	unsigned long idx;
 
 	lockdep_assert_held(&kvm->arch.config_lock);
@@ -315,63 +405,25 @@ int vgic_init(struct kvm *kvm)
 	if (ret)
 		goto out;
 
-	/* Initialize groups on CPUs created before the VGIC type was known */
-	kvm_for_each_vcpu(idx, vcpu, kvm) {
-		ret = vgic_allocate_private_irqs_locked(vcpu);
-		if (ret)
-			goto out;
-
-		for (i = 0; i < VGIC_NR_PRIVATE_IRQS; i++) {
-			struct vgic_irq *irq = vgic_get_vcpu_irq(vcpu, i);
-
-			switch (dist->vgic_model) {
-			case KVM_DEV_TYPE_ARM_VGIC_V3:
-				irq->group = 1;
-				irq->mpidr = kvm_vcpu_get_mpidr_aff(vcpu);
-				break;
-			case KVM_DEV_TYPE_ARM_VGIC_V2:
-				irq->group = 0;
-				irq->targets = 1U << idx;
-				break;
-			default:
-				ret = -EINVAL;
-			}
-
-			vgic_put_irq(kvm, irq);
-
-			if (ret)
-				goto out;
-		}
-	}
-
 	/*
-	 * If we have GICv4.1 enabled, unconditionally request enable the
-	 * v4 support so that we get HW-accelerated vSGIs. Otherwise, only
-	 * enable it if we present a virtual ITS to the guest.
+	 * Ensure vPEs are allocated if direct IRQ injection (e.g. vSGIs,
+	 * vLPIs) is supported.
 	 */
-	if (vgic_supports_direct_msis(kvm)) {
+	if (vgic_supports_direct_irqs(kvm)) {
 		ret = vgic_v4_init(kvm);
 		if (ret)
 			goto out;
 	}
 
 	kvm_for_each_vcpu(idx, vcpu, kvm)
-		kvm_vgic_vcpu_enable(vcpu);
+		kvm_vgic_vcpu_reset(vcpu);
 
 	ret = kvm_vgic_setup_default_irq_routing(kvm);
 	if (ret)
 		goto out;
 
 	vgic_debug_init(kvm);
-
-	/*
-	 * If userspace didn't set the GIC implementation revision,
-	 * default to the latest and greatest. You know want it.
-	 */
-	if (!dist->implementation_rev)
-		dist->implementation_rev = KVM_VGIC_IMP_REV_LATEST;
 	dist->initialized = true;
-
 out:
 	return ret;
 }
@@ -397,7 +449,7 @@ static void kvm_vgic_dist_destroy(struct kvm *kvm)
 		dist->vgic_cpu_base = VGIC_ADDR_UNDEF;
 	}
 
-	if (vgic_supports_direct_msis(kvm))
+	if (vgic_supports_direct_irqs(kvm))
 		vgic_v4_teardown(kvm);
 
 	xa_destroy(&dist->lpi_xa);
@@ -513,7 +565,6 @@ int vgic_lazy_init(struct kvm *kvm)
  * Also map the virtual CPU interface into the VM.
  * v2 calls vgic_init() if not already done.
  * v3 and derivatives return an error if the VGIC is not initialized.
- * vgic_ready() returns true if this function has succeeded.
  */
 int kvm_vgic_map_resources(struct kvm *kvm)
 {
@@ -522,12 +573,12 @@ int kvm_vgic_map_resources(struct kvm *kvm)
 	gpa_t dist_base;
 	int ret = 0;
 
-	if (likely(vgic_ready(kvm)))
+	if (likely(smp_load_acquire(&dist->ready)))
 		return 0;
 
 	mutex_lock(&kvm->slots_lock);
 	mutex_lock(&kvm->arch.config_lock);
-	if (vgic_ready(kvm))
+	if (dist->ready)
 		goto out;
 
 	if (!irqchip_in_kernel(kvm))
@@ -553,14 +604,7 @@ int kvm_vgic_map_resources(struct kvm *kvm)
 		goto out_slots;
 	}
 
-	/*
-	 * kvm_io_bus_register_dev() guarantees all readers see the new MMIO
-	 * registration before returning through synchronize_srcu(), which also
-	 * implies a full memory barrier. As such, marking the distributor as
-	 * 'ready' here is guaranteed to be ordered after all vCPUs having seen
-	 * a completely configured distributor.
-	 */
-	dist->ready = true;
+	smp_store_release(&dist->ready, true);
 	goto out_slots;
 out:
 	mutex_unlock(&kvm->arch.config_lock);
@@ -588,12 +632,20 @@ void kvm_vgic_cpu_down(void)
 
 static irqreturn_t vgic_maintenance_handler(int irq, void *data)
 {
+	struct kvm_vcpu *vcpu = *(struct kvm_vcpu **)data;
+
 	/*
 	 * We cannot rely on the vgic maintenance interrupt to be
 	 * delivered synchronously. This means we can only use it to
 	 * exit the VM, and we perform the handling of EOIed
 	 * interrupts on the exit path (see vgic_fold_lr_state).
+	 *
+	 * Of course, NV throws a wrench in this plan, and needs
+	 * something special.
 	 */
+	if (vcpu && vgic_state_is_nested(vcpu))
+		vgic_v3_handle_nested_maint_irq(vcpu);
+
 	return IRQ_HANDLED;
 }
 
@@ -620,10 +672,12 @@ void kvm_vgic_init_cpu_hardware(void)
 	 * We want to make sure the list registers start out clear so that we
 	 * only have the program the used registers.
 	 */
-	if (kvm_vgic_global_state.type == VGIC_V2)
+	if (kvm_vgic_global_state.type == VGIC_V2) {
 		vgic_v2_init_lrs();
-	else
+	} else if (kvm_vgic_global_state.type == VGIC_V3 ||
+		   kvm_vgic_global_state.has_gcie_v3_compat) {
 		kvm_call_hyp(__vgic_v3_init_lrs);
+	}
 }
 
 /**
@@ -668,6 +722,9 @@ int kvm_vgic_hyp_init(void)
 			kvm_info("GIC system register CPU interface enabled\n");
 		}
 		break;
+	case GIC_V5:
+		ret = vgic_v5_probe(gic_kvm_info);
+		break;
 	default:
 		ret = -ENODEV;
 	}
diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c
index f4c4494645c3..3f1c4b10fed9 100644
--- a/arch/arm64/kvm/vgic/vgic-its.c
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@@ -99,7 +99,7 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid,
 	raw_spin_lock_init(&irq->irq_lock);
 
 	irq->config = VGIC_CONFIG_EDGE;
-	kref_init(&irq->refcount);
+	refcount_set(&irq->refcount, 1);
 	irq->intid = intid;
 	irq->target_vcpu = vcpu;
 	irq->group = 1;
@@ -111,25 +111,22 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid,
 	 * check that we don't add a second list entry with the same LPI.
 	 */
 	oldirq = xa_load(&dist->lpi_xa, intid);
-	if (vgic_try_get_irq_kref(oldirq)) {
+	if (vgic_try_get_irq_ref(oldirq)) {
 		/* Someone was faster with adding this LPI, lets use that. */
 		kfree(irq);
 		irq = oldirq;
-
-		goto out_unlock;
+	} else {
+		ret = xa_err(__xa_store(&dist->lpi_xa, intid, irq, 0));
 	}
 
-	ret = xa_err(__xa_store(&dist->lpi_xa, intid, irq, 0));
+	xa_unlock_irqrestore(&dist->lpi_xa, flags);
+
 	if (ret) {
 		xa_release(&dist->lpi_xa, intid);
 		kfree(irq);
-	}
-
-out_unlock:
-	xa_unlock_irqrestore(&dist->lpi_xa, flags);
 
-	if (ret)
 		return ERR_PTR(ret);
+	}
 
 	/*
 	 * We "cache" the configuration table entries in our struct vgic_irq's.
@@ -154,36 +151,6 @@ out_unlock:
 	return irq;
 }
 
-struct its_device {
-	struct list_head dev_list;
-
-	/* the head for the list of ITTEs */
-	struct list_head itt_head;
-	u32 num_eventid_bits;
-	gpa_t itt_addr;
-	u32 device_id;
-};
-
-#define COLLECTION_NOT_MAPPED ((u32)~0)
-
-struct its_collection {
-	struct list_head coll_list;
-
-	u32 collection_id;
-	u32 target_addr;
-};
-
-#define its_is_collection_mapped(coll) ((coll) && \
-				((coll)->target_addr != COLLECTION_NOT_MAPPED))
-
-struct its_ite {
-	struct list_head ite_list;
-
-	struct vgic_irq *irq;
-	struct its_collection *collection;
-	u32 event_id;
-};
-
 /**
  * struct vgic_its_abi - ITS abi ops and settings
  * @cte_esz: collection table entry size
@@ -336,39 +303,34 @@ static int update_lpi_config(struct kvm *kvm, struct vgic_irq *irq,
 		}
 	}
 
-	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-
 	if (irq->hw)
-		return its_prop_update_vlpi(irq->host_irq, prop, needs_inv);
+		ret = its_prop_update_vlpi(irq->host_irq, prop, needs_inv);
 
-	return 0;
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	return ret;
 }
 
 static int update_affinity(struct vgic_irq *irq, struct kvm_vcpu *vcpu)
 {
-	int ret = 0;
-	unsigned long flags;
+	struct its_vlpi_map map;
+	int ret;
 
-	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	guard(raw_spinlock_irqsave)(&irq->irq_lock);
 	irq->target_vcpu = vcpu;
-	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-
-	if (irq->hw) {
-		struct its_vlpi_map map;
 
-		ret = its_get_vlpi(irq->host_irq, &map);
-		if (ret)
-			return ret;
+	if (!irq->hw)
+		return 0;
 
-		if (map.vpe)
-			atomic_dec(&map.vpe->vlpi_count);
-		map.vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
-		atomic_inc(&map.vpe->vlpi_count);
+	ret = its_get_vlpi(irq->host_irq, &map);
+	if (ret)
+		return ret;
 
-		ret = its_map_vlpi(irq->host_irq, &map);
-	}
+	if (map.vpe)
+		atomic_dec(&map.vpe->vlpi_count);
 
-	return ret;
+	map.vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+	atomic_inc(&map.vpe->vlpi_count);
+	return its_map_vlpi(irq->host_irq, &map);
 }
 
 static struct kvm_vcpu *collection_to_vcpu(struct kvm *kvm,
@@ -582,7 +544,7 @@ static struct vgic_irq *vgic_its_check_cache(struct kvm *kvm, phys_addr_t db,
 	rcu_read_lock();
 
 	irq = xa_load(&its->translation_cache, cache_key);
-	if (!vgic_try_get_irq_kref(irq))
+	if (!vgic_try_get_irq_ref(irq))
 		irq = NULL;
 
 	rcu_read_unlock();
@@ -606,14 +568,24 @@ static void vgic_its_cache_translation(struct kvm *kvm, struct vgic_its *its,
 	 * its_lock, as the ITE (and the reference it holds) cannot be freed.
 	 */
 	lockdep_assert_held(&its->its_lock);
-	vgic_get_irq_kref(irq);
+	vgic_get_irq_ref(irq);
+
+	old = xa_store(&its->translation_cache, cache_key, irq, GFP_KERNEL_ACCOUNT);
+
+	/*
+	 * Put the reference taken on @irq if the store fails. Intentionally do
+	 * not return the error as the translation cache is best effort.
+	 */
+	if (xa_is_err(old)) {
+		vgic_put_irq(kvm, irq);
+		return;
+	}
 
 	/*
 	 * We could have raced with another CPU caching the same
 	 * translation behind our back, ensure we don't leak a
 	 * reference if that is the case.
 	 */
-	old = xa_store(&its->translation_cache, cache_key, irq, GFP_KERNEL_ACCOUNT);
 	if (old)
 		vgic_put_irq(kvm, old);
 }
@@ -776,12 +748,17 @@ int vgic_its_inject_msi(struct kvm *kvm, struct kvm_msi *msi)
 /* Requires the its_lock to be held. */
 static void its_free_ite(struct kvm *kvm, struct its_ite *ite)
 {
+	struct vgic_irq *irq = ite->irq;
 	list_del(&ite->ite_list);
 
 	/* This put matches the get in vgic_add_lpi. */
-	if (ite->irq) {
-		if (ite->irq->hw)
-			WARN_ON(its_unmap_vlpi(ite->irq->host_irq));
+	if (irq) {
+		scoped_guard(raw_spinlock_irqsave, &irq->irq_lock) {
+			if (irq->hw)
+				its_unmap_vlpi(ite->irq->host_irq);
+
+			irq->hw = false;
+		}
 
 		vgic_put_irq(kvm, ite->irq);
 	}
@@ -1928,6 +1905,8 @@ static void vgic_its_destroy(struct kvm_device *kvm_dev)
 
 	mutex_lock(&its->its_lock);
 
+	vgic_its_debug_destroy(kvm_dev);
+
 	vgic_its_free_device_list(kvm, its);
 	vgic_its_free_collection_list(kvm, its);
 	vgic_its_invalidate_cache(its);
@@ -1989,7 +1968,7 @@ static int vgic_its_attr_regs_access(struct kvm_device *dev,
 
 	mutex_lock(&dev->kvm->lock);
 
-	if (!lock_all_vcpus(dev->kvm)) {
+	if (kvm_trylock_all_vcpus(dev->kvm)) {
 		mutex_unlock(&dev->kvm->lock);
 		return -EBUSY;
 	}
@@ -2024,7 +2003,7 @@ static int vgic_its_attr_regs_access(struct kvm_device *dev,
 	}
 out:
 	mutex_unlock(&dev->kvm->arch.config_lock);
-	unlock_all_vcpus(dev->kvm);
+	kvm_unlock_all_vcpus(dev->kvm);
 	mutex_unlock(&dev->kvm->lock);
 	return ret;
 }
@@ -2694,7 +2673,7 @@ static int vgic_its_ctrl(struct kvm *kvm, struct vgic_its *its, u64 attr)
 
 	mutex_lock(&kvm->lock);
 
-	if (!lock_all_vcpus(kvm)) {
+	if (kvm_trylock_all_vcpus(kvm)) {
 		mutex_unlock(&kvm->lock);
 		return -EBUSY;
 	}
@@ -2712,11 +2691,14 @@ static int vgic_its_ctrl(struct kvm *kvm, struct vgic_its *its, u64 attr)
 	case KVM_DEV_ARM_ITS_RESTORE_TABLES:
 		ret = abi->restore_tables(its);
 		break;
+	default:
+		ret = -ENXIO;
+		break;
 	}
 
 	mutex_unlock(&its->its_lock);
 	mutex_unlock(&kvm->arch.config_lock);
-	unlock_all_vcpus(kvm);
+	kvm_unlock_all_vcpus(kvm);
 	mutex_unlock(&kvm->lock);
 	return ret;
 }
@@ -2761,7 +2743,12 @@ static int vgic_its_set_attr(struct kvm_device *dev,
 		if (ret)
 			return ret;
 
-		return vgic_register_its_iodev(dev->kvm, its, addr);
+		ret = vgic_register_its_iodev(dev->kvm, its, addr);
+		if (ret)
+			return ret;
+
+		return vgic_its_debug_init(dev);
+
 	}
 	case KVM_DEV_ARM_VGIC_GRP_CTRL:
 		return vgic_its_ctrl(dev->kvm, its, attr->attr);
diff --git a/arch/arm64/kvm/vgic/vgic-kvm-device.c b/arch/arm64/kvm/vgic/vgic-kvm-device.c
index 5f4f57aaa23e..3d1a776b716d 100644
--- a/arch/arm64/kvm/vgic/vgic-kvm-device.c
+++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2015 ARM Ltd.
  * Author: Marc Zyngier <marc.zyngier@arm.com>
  */
+#include <linux/irqchip/arm-gic-v3.h>
 #include <linux/kvm_host.h>
 #include <kvm/arm_vgic.h>
 #include <linux/uaccess.h>
@@ -268,7 +269,7 @@ static int vgic_set_common_attr(struct kvm_device *dev,
 				return -ENXIO;
 			mutex_lock(&dev->kvm->lock);
 
-			if (!lock_all_vcpus(dev->kvm)) {
+			if (kvm_trylock_all_vcpus(dev->kvm)) {
 				mutex_unlock(&dev->kvm->lock);
 				return -EBUSY;
 			}
@@ -276,7 +277,7 @@ static int vgic_set_common_attr(struct kvm_device *dev,
 			mutex_lock(&dev->kvm->arch.config_lock);
 			r = vgic_v3_save_pending_tables(dev->kvm);
 			mutex_unlock(&dev->kvm->arch.config_lock);
-			unlock_all_vcpus(dev->kvm);
+			kvm_unlock_all_vcpus(dev->kvm);
 			mutex_unlock(&dev->kvm->lock);
 			return r;
 		}
@@ -384,7 +385,7 @@ static int vgic_v2_attr_regs_access(struct kvm_device *dev,
 
 	mutex_lock(&dev->kvm->lock);
 
-	if (!lock_all_vcpus(dev->kvm)) {
+	if (kvm_trylock_all_vcpus(dev->kvm)) {
 		mutex_unlock(&dev->kvm->lock);
 		return -EBUSY;
 	}
@@ -409,7 +410,7 @@ static int vgic_v2_attr_regs_access(struct kvm_device *dev,
 
 out:
 	mutex_unlock(&dev->kvm->arch.config_lock);
-	unlock_all_vcpus(dev->kvm);
+	kvm_unlock_all_vcpus(dev->kvm);
 	mutex_unlock(&dev->kvm->lock);
 
 	if (!ret && !is_write)
@@ -504,6 +505,24 @@ int vgic_v3_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
 }
 
 /*
+ * Allow access to certain ID-like registers prior to VGIC initialization,
+ * thereby allowing the VMM to provision the features / sizing of the VGIC.
+ */
+static bool reg_allowed_pre_init(struct kvm_device_attr *attr)
+{
+	if (attr->group != KVM_DEV_ARM_VGIC_GRP_DIST_REGS)
+		return false;
+
+	switch (attr->attr & KVM_DEV_ARM_VGIC_OFFSET_MASK) {
+	case GICD_IIDR:
+	case GICD_TYPER2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/*
  * vgic_v3_attr_regs_access - allows user space to access VGIC v3 state
  *
  * @dev:      kvm device handle
@@ -545,14 +564,14 @@ static int vgic_v3_attr_regs_access(struct kvm_device *dev,
 
 	mutex_lock(&dev->kvm->lock);
 
-	if (!lock_all_vcpus(dev->kvm)) {
+	if (kvm_trylock_all_vcpus(dev->kvm)) {
 		mutex_unlock(&dev->kvm->lock);
 		return -EBUSY;
 	}
 
 	mutex_lock(&dev->kvm->arch.config_lock);
 
-	if (unlikely(!vgic_initialized(dev->kvm))) {
+	if (!(vgic_initialized(dev->kvm) || reg_allowed_pre_init(attr))) {
 		ret = -EBUSY;
 		goto out;
 	}
@@ -589,7 +608,7 @@ static int vgic_v3_attr_regs_access(struct kvm_device *dev,
 
 out:
 	mutex_unlock(&dev->kvm->arch.config_lock);
-	unlock_all_vcpus(dev->kvm);
+	kvm_unlock_all_vcpus(dev->kvm);
 	mutex_unlock(&dev->kvm->lock);
 
 	if (!ret && uaccess && !is_write) {
@@ -609,6 +628,23 @@ static int vgic_v3_set_attr(struct kvm_device *dev,
 	case KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS:
 	case KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO:
 		return vgic_v3_attr_regs_access(dev, attr, true);
+	case KVM_DEV_ARM_VGIC_GRP_MAINT_IRQ: {
+		u32 __user *uaddr = (u32 __user *)attr->addr;
+		u32 val;
+
+		if (get_user(val, uaddr))
+			return -EFAULT;
+
+		guard(mutex)(&dev->kvm->arch.config_lock);
+		if (vgic_initialized(dev->kvm))
+			return -EBUSY;
+
+		if (!irq_is_ppi(val))
+			return -EINVAL;
+
+		dev->kvm->arch.vgic.mi_intid = val;
+		return 0;
+	}
 	default:
 		return vgic_set_common_attr(dev, attr);
 	}
@@ -623,6 +659,12 @@ static int vgic_v3_get_attr(struct kvm_device *dev,
 	case KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS:
 	case KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO:
 		return vgic_v3_attr_regs_access(dev, attr, false);
+	case KVM_DEV_ARM_VGIC_GRP_MAINT_IRQ: {
+		u32 __user *uaddr = (u32 __user *)(long)attr->addr;
+
+		guard(mutex)(&dev->kvm->arch.config_lock);
+		return put_user(dev->kvm->arch.vgic.mi_intid, uaddr);
+	}
 	default:
 		return vgic_get_common_attr(dev, attr);
 	}
@@ -645,6 +687,7 @@ static int vgic_v3_has_attr(struct kvm_device *dev,
 	case KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS:
 		return vgic_v3_has_attr_regs(dev, attr);
 	case KVM_DEV_ARM_VGIC_GRP_NR_IRQS:
+	case KVM_DEV_ARM_VGIC_GRP_MAINT_IRQ:
 		return 0;
 	case KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO: {
 		if (((attr->attr & KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK) >>
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v2.c b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
index f25fccb1f8e6..406845b3117c 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio-v2.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
@@ -359,6 +359,16 @@ static void vgic_mmio_write_vcpuif(struct kvm_vcpu *vcpu,
 	vgic_set_vmcr(vcpu, &vmcr);
 }
 
+static void vgic_mmio_write_dir(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_deactivate(vcpu, val);
+	else
+		vgic_v3_deactivate(vcpu, val);
+}
+
 static unsigned long vgic_mmio_read_apr(struct kvm_vcpu *vcpu,
 					gpa_t addr, unsigned int len)
 {
@@ -482,6 +492,10 @@ static const struct vgic_register_region vgic_v2_cpu_registers[] = {
 	REGISTER_DESC_WITH_LENGTH(GIC_CPU_IDENT,
 		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
 		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH_UACCESS(GIC_CPU_DEACTIVATE,
+		vgic_mmio_read_raz, vgic_mmio_write_dir,
+		vgic_mmio_read_raz, vgic_mmio_uaccess_write_wi,
+		4, VGIC_ACCESS_32bit),
 };
 
 unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev)
@@ -494,6 +508,16 @@ unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev)
 	return SZ_4K;
 }
 
+unsigned int vgic_v2_init_cpuif_iodev(struct vgic_io_device *dev)
+{
+	dev->regions = vgic_v2_cpu_registers;
+	dev->nr_regions = ARRAY_SIZE(vgic_v2_cpu_registers);
+
+	kvm_iodevice_init(&dev->dev, &kvm_io_gic_ops);
+
+	return KVM_VGIC_V2_CPU_SIZE;
+}
+
 int vgic_v2_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr)
 {
 	const struct vgic_register_region *region;
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
index ae4c0593d114..70d50c77e5dc 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
@@ -50,8 +50,25 @@ bool vgic_has_its(struct kvm *kvm)
 
 bool vgic_supports_direct_msis(struct kvm *kvm)
 {
-	return (kvm_vgic_global_state.has_gicv4_1 ||
-		(kvm_vgic_global_state.has_gicv4 && vgic_has_its(kvm)));
+	/*
+	 * Deliberately conflate vLPI and vSGI support on GICv4.1 hardware,
+	 * indirectly allowing userspace to control whether or not vPEs are
+	 * allocated for the VM.
+	 */
+	if (system_supports_direct_sgis() && !vgic_supports_direct_sgis(kvm))
+		return false;
+
+	return kvm_vgic_global_state.has_gicv4 && vgic_has_its(kvm);
+}
+
+bool system_supports_direct_sgis(void)
+{
+	return kvm_vgic_global_state.has_gicv4_1 && gic_cpuif_has_vsgi();
+}
+
+bool vgic_supports_direct_sgis(struct kvm *kvm)
+{
+	return kvm->arch.vgic.nassgicap;
 }
 
 /*
@@ -86,7 +103,7 @@ static unsigned long vgic_mmio_read_v3_misc(struct kvm_vcpu *vcpu,
 		}
 		break;
 	case GICD_TYPER2:
-		if (kvm_vgic_global_state.has_gicv4_1 && gic_cpuif_has_vsgi())
+		if (vgic_supports_direct_sgis(vcpu->kvm))
 			value = GICD_TYPER2_nASSGIcap;
 		break;
 	case GICD_IIDR:
@@ -119,7 +136,7 @@ static void vgic_mmio_write_v3_misc(struct kvm_vcpu *vcpu,
 		dist->enabled = val & GICD_CTLR_ENABLE_SS_G1;
 
 		/* Not a GICv4.1? No HW SGIs */
-		if (!kvm_vgic_global_state.has_gicv4_1 || !gic_cpuif_has_vsgi())
+		if (!vgic_supports_direct_sgis(vcpu->kvm))
 			val &= ~GICD_CTLR_nASSGIreq;
 
 		/* Dist stays enabled? nASSGIreq is RO */
@@ -133,7 +150,7 @@ static void vgic_mmio_write_v3_misc(struct kvm_vcpu *vcpu,
 		if (is_hwsgi != dist->nassgireq)
 			vgic_v4_configure_vsgis(vcpu->kvm);
 
-		if (kvm_vgic_global_state.has_gicv4_1 &&
+		if (vgic_supports_direct_sgis(vcpu->kvm) &&
 		    was_enabled != dist->enabled)
 			kvm_make_all_cpus_request(vcpu->kvm, KVM_REQ_RELOAD_GICv4);
 		else if (!was_enabled && dist->enabled)
@@ -159,8 +176,18 @@ static int vgic_mmio_uaccess_write_v3_misc(struct kvm_vcpu *vcpu,
 
 	switch (addr & 0x0c) {
 	case GICD_TYPER2:
-		if (val != vgic_mmio_read_v3_misc(vcpu, addr, len))
+		reg = vgic_mmio_read_v3_misc(vcpu, addr, len);
+
+		if (reg == val)
+			return 0;
+		if (vgic_initialized(vcpu->kvm))
+			return -EBUSY;
+		if ((reg ^ val) & ~GICD_TYPER2_nASSGIcap)
+			return -EINVAL;
+		if (!system_supports_direct_sgis() && val)
 			return -EINVAL;
+
+		dist->nassgicap = val & GICD_TYPER2_nASSGIcap;
 		return 0;
 	case GICD_IIDR:
 		reg = vgic_mmio_read_v3_misc(vcpu, addr, len);
@@ -178,7 +205,7 @@ static int vgic_mmio_uaccess_write_v3_misc(struct kvm_vcpu *vcpu,
 		}
 	case GICD_CTLR:
 		/* Not a GICv4.1? No HW SGIs */
-		if (!kvm_vgic_global_state.has_gicv4_1)
+		if (!vgic_supports_direct_sgis(vcpu->kvm))
 			val &= ~GICD_CTLR_nASSGIreq;
 
 		dist->enabled = val & GICD_CTLR_ENABLE_SS_G1;
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c
index e416e433baff..a573b1f0c6cb 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -1091,7 +1091,7 @@ int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
 		len = vgic_v3_init_dist_iodev(io_device);
 		break;
 	default:
-		BUG_ON(1);
+		BUG();
 	}
 
 	io_device->base_addr = dist_base_address;
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.h b/arch/arm64/kvm/vgic/vgic-mmio.h
index 5b490a4dfa5e..50dc80220b0f 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.h
+++ b/arch/arm64/kvm/vgic/vgic-mmio.h
@@ -213,6 +213,7 @@ void vgic_write_irq_line_level_info(struct kvm_vcpu *vcpu, u32 intid,
 				    const u32 val);
 
 unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev);
+unsigned int vgic_v2_init_cpuif_iodev(struct vgic_io_device *dev);
 
 unsigned int vgic_v3_init_dist_iodev(struct vgic_io_device *dev);
 
diff --git a/arch/arm64/kvm/vgic/vgic-v2.c b/arch/arm64/kvm/vgic/vgic-v2.c
index 381673f03c39..585491fbda80 100644
--- a/arch/arm64/kvm/vgic/vgic-v2.c
+++ b/arch/arm64/kvm/vgic/vgic-v2.c
@@ -9,6 +9,7 @@
 #include <kvm/arm_vgic.h>
 #include <asm/kvm_mmu.h>
 
+#include "vgic-mmio.h"
 #include "vgic.h"
 
 static inline void vgic_v2_write_lr(int lr, u32 val)
@@ -26,11 +27,24 @@ void vgic_v2_init_lrs(void)
 		vgic_v2_write_lr(i, 0);
 }
 
-void vgic_v2_set_underflow(struct kvm_vcpu *vcpu)
+void vgic_v2_configure_hcr(struct kvm_vcpu *vcpu,
+			   struct ap_list_summary *als)
 {
 	struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
 
-	cpuif->vgic_hcr |= GICH_HCR_UIE;
+	cpuif->vgic_hcr = GICH_HCR_EN;
+
+	if (irqs_pending_outside_lrs(als))
+		cpuif->vgic_hcr |= GICH_HCR_NPIE;
+	if (irqs_active_outside_lrs(als))
+		cpuif->vgic_hcr |= GICH_HCR_LRENPIE;
+	if (irqs_outside_lrs(als))
+		cpuif->vgic_hcr |= GICH_HCR_UIE;
+
+	cpuif->vgic_hcr |= (cpuif->vgic_vmcr & GICH_VMCR_ENABLE_GRP0_MASK) ?
+		GICH_HCR_VGrp0DIE : GICH_HCR_VGrp0EIE;
+	cpuif->vgic_hcr |= (cpuif->vgic_vmcr & GICH_VMCR_ENABLE_GRP1_MASK) ?
+		GICH_HCR_VGrp1DIE : GICH_HCR_VGrp1EIE;
 }
 
 static bool lr_signals_eoi_mi(u32 lr_val)
@@ -39,43 +53,23 @@ static bool lr_signals_eoi_mi(u32 lr_val)
 	       !(lr_val & GICH_LR_HW);
 }
 
-/*
- * transfer the content of the LRs back into the corresponding ap_list:
- * - active bit is transferred as is
- * - pending bit is
- *   - transferred as is in case of edge sensitive IRQs
- *   - set to the line-level (resample time) for level sensitive IRQs
- */
-void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
+static void vgic_v2_fold_lr(struct kvm_vcpu *vcpu, u32 val)
 {
-	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
-	struct vgic_v2_cpu_if *cpuif = &vgic_cpu->vgic_v2;
-	int lr;
-
-	DEBUG_SPINLOCK_BUG_ON(!irqs_disabled());
-
-	cpuif->vgic_hcr &= ~GICH_HCR_UIE;
-
-	for (lr = 0; lr < vgic_cpu->vgic_v2.used_lrs; lr++) {
-		u32 val = cpuif->vgic_lr[lr];
-		u32 cpuid, intid = val & GICH_LR_VIRTUALID;
-		struct vgic_irq *irq;
-		bool deactivated;
-
-		/* Extract the source vCPU id from the LR */
-		cpuid = val & GICH_LR_PHYSID_CPUID;
-		cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT;
-		cpuid &= 7;
+	u32 cpuid, intid = val & GICH_LR_VIRTUALID;
+	struct vgic_irq *irq;
+	bool deactivated;
 
-		/* Notify fds when the guest EOI'ed a level-triggered SPI */
-		if (lr_signals_eoi_mi(val) && vgic_valid_spi(vcpu->kvm, intid))
-			kvm_notify_acked_irq(vcpu->kvm, 0,
-					     intid - VGIC_NR_PRIVATE_IRQS);
+	/* Extract the source vCPU id from the LR */
+	cpuid = FIELD_GET(GICH_LR_PHYSID_CPUID, val) & 7;
 
-		irq = vgic_get_vcpu_irq(vcpu, intid);
+	/* Notify fds when the guest EOI'ed a level-triggered SPI */
+	if (lr_signals_eoi_mi(val) && vgic_valid_spi(vcpu->kvm, intid))
+		kvm_notify_acked_irq(vcpu->kvm, 0,
+				     intid - VGIC_NR_PRIVATE_IRQS);
 
-		raw_spin_lock(&irq->irq_lock);
+	irq = vgic_get_vcpu_irq(vcpu, intid);
 
+	scoped_guard(raw_spinlock, &irq->irq_lock) {
 		/* Always preserve the active bit, note deactivation */
 		deactivated = irq->active && !(val & GICH_LR_ACTIVE_BIT);
 		irq->active = !!(val & GICH_LR_ACTIVE_BIT);
@@ -101,29 +95,139 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
 		/* Handle resampling for mapped interrupts if required */
 		vgic_irq_handle_resampling(irq, deactivated, val & GICH_LR_PENDING_BIT);
 
-		raw_spin_unlock(&irq->irq_lock);
-		vgic_put_irq(vcpu->kvm, irq);
+		irq->on_lr = false;
 	}
 
-	cpuif->used_lrs = 0;
+	vgic_put_irq(vcpu->kvm, irq);
 }
 
+static u32 vgic_v2_compute_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq);
+
 /*
- * Populates the particular LR with the state of a given IRQ:
- * - for an edge sensitive IRQ the pending state is cleared in struct vgic_irq
- * - for a level sensitive IRQ the pending state value is unchanged;
- *   it is dictated directly by the input level
- *
- * If @irq describes an SGI with multiple sources, we choose the
- * lowest-numbered source VCPU and clear that bit in the source bitmap.
- *
- * The irq_lock must be held by the caller.
+ * transfer the content of the LRs back into the corresponding ap_list:
+ * - active bit is transferred as is
+ * - pending bit is
+ *   - transferred as is in case of edge sensitive IRQs
+ *   - set to the line-level (resample time) for level sensitive IRQs
  */
-void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
+void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_v2_cpu_if *cpuif = &vgic_cpu->vgic_v2;
+	u32 eoicount = FIELD_GET(GICH_HCR_EOICOUNT, cpuif->vgic_hcr);
+	struct vgic_irq *irq;
+
+	DEBUG_SPINLOCK_BUG_ON(!irqs_disabled());
+
+	for (int lr = 0; lr < vgic_cpu->vgic_v2.used_lrs; lr++)
+		vgic_v2_fold_lr(vcpu, cpuif->vgic_lr[lr]);
+
+	/* See the GICv3 equivalent for the EOIcount handling rationale */
+	list_for_each_entry(irq, &vgic_cpu->ap_list_head, ap_list) {
+		u32 lr;
+
+		if (!eoicount) {
+			break;
+		} else {
+			guard(raw_spinlock)(&irq->irq_lock);
+
+			if (!(likely(vgic_target_oracle(irq) == vcpu) &&
+			      irq->active))
+				continue;
+
+			lr = vgic_v2_compute_lr(vcpu, irq) & ~GICH_LR_ACTIVE_BIT;
+		}
+
+		if (lr & GICH_LR_HW)
+			writel_relaxed(FIELD_GET(GICH_LR_PHYSID_CPUID, lr),
+				       kvm_vgic_global_state.gicc_base + GIC_CPU_DEACTIVATE);
+		vgic_v2_fold_lr(vcpu, lr);
+		eoicount--;
+	}
+
+	cpuif->used_lrs = 0;
+}
+
+void vgic_v2_deactivate(struct kvm_vcpu *vcpu, u32 val)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_v2_cpu_if *cpuif = &vgic_cpu->vgic_v2;
+	struct kvm_vcpu *target_vcpu = NULL;
+	bool mmio = false;
+	struct vgic_irq *irq;
+	unsigned long flags;
+	u64 lr = 0;
+	u8 cpuid;
+
+	/* Snapshot CPUID, and remove it from the INTID */
+	cpuid = FIELD_GET(GENMASK_ULL(12, 10), val);
+	val &= ~GENMASK_ULL(12, 10);
+
+	/* We only deal with DIR when EOIMode==1 */
+	if (!(cpuif->vgic_vmcr & GICH_VMCR_EOI_MODE_MASK))
+		return;
+
+	/* Make sure we're in the same context as LR handling */
+	local_irq_save(flags);
+
+	irq = vgic_get_vcpu_irq(vcpu, val);
+	if (WARN_ON_ONCE(!irq))
+		goto out;
+
+	/* See the corresponding v3 code for the rationale */
+	scoped_guard(raw_spinlock, &irq->irq_lock) {
+		target_vcpu = irq->vcpu;
+
+		/* Not on any ap_list? */
+		if (!target_vcpu)
+			goto put;
+
+		/*
+		 * Urgh. We're deactivating something that we cannot
+		 * observe yet... Big hammer time.
+		 */
+		if (irq->on_lr) {
+			mmio = true;
+			goto put;
+		}
+
+		/* SGI: check that the cpuid matches */
+		if (val < VGIC_NR_SGIS && irq->active_source != cpuid) {
+			target_vcpu = NULL;
+			goto put;
+		}
+
+		/* (with a Dalek voice) DEACTIVATE!!!! */
+		lr = vgic_v2_compute_lr(vcpu, irq) & ~GICH_LR_ACTIVE_BIT;
+	}
+
+	if (lr & GICH_LR_HW)
+		writel_relaxed(FIELD_GET(GICH_LR_PHYSID_CPUID, lr),
+			       kvm_vgic_global_state.gicc_base + GIC_CPU_DEACTIVATE);
+
+	vgic_v2_fold_lr(vcpu, lr);
+
+put:
+	vgic_put_irq(vcpu->kvm, irq);
+
+out:
+	local_irq_restore(flags);
+
+	if (mmio)
+		vgic_mmio_write_cactive(vcpu, (val / 32) * 4, 4, BIT(val % 32));
+
+	/* Force the ap_list to be pruned */
+	if (target_vcpu)
+		kvm_make_request(KVM_REQ_VGIC_PROCESS_UPDATE, target_vcpu);
+}
+
+static u32 vgic_v2_compute_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 {
 	u32 val = irq->intid;
 	bool allow_pending = true;
 
+	WARN_ON(irq->on_lr);
+
 	if (irq->active) {
 		val |= GICH_LR_ACTIVE_BIT;
 		if (vgic_irq_is_sgi(irq->intid))
@@ -163,22 +267,52 @@ void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
 	if (allow_pending && irq_is_pending(irq)) {
 		val |= GICH_LR_PENDING_BIT;
 
-		if (irq->config == VGIC_CONFIG_EDGE)
-			irq->pending_latch = false;
-
 		if (vgic_irq_is_sgi(irq->intid)) {
 			u32 src = ffs(irq->source);
 
 			if (WARN_RATELIMIT(!src, "No SGI source for INTID %d\n",
 					   irq->intid))
-				return;
+				return 0;
 
 			val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT;
-			irq->source &= ~(1 << (src - 1));
-			if (irq->source) {
-				irq->pending_latch = true;
+			if (irq->source & ~BIT(src - 1))
 				val |= GICH_LR_EOI;
-			}
+		}
+	}
+
+	/* The GICv2 LR only holds five bits of priority. */
+	val |= (irq->priority >> 3) << GICH_LR_PRIORITY_SHIFT;
+
+	return val;
+}
+
+/*
+ * Populates the particular LR with the state of a given IRQ:
+ * - for an edge sensitive IRQ the pending state is cleared in struct vgic_irq
+ * - for a level sensitive IRQ the pending state value is unchanged;
+ *   it is dictated directly by the input level
+ *
+ * If @irq describes an SGI with multiple sources, we choose the
+ * lowest-numbered source VCPU and clear that bit in the source bitmap.
+ *
+ * The irq_lock must be held by the caller.
+ */
+void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
+{
+	u32 val = vgic_v2_compute_lr(vcpu, irq);
+
+	vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = val;
+
+	if (val & GICH_LR_PENDING_BIT) {
+		if (irq->config == VGIC_CONFIG_EDGE)
+			irq->pending_latch = false;
+
+		if (vgic_irq_is_sgi(irq->intid)) {
+			u32 src = ffs(irq->source);
+
+			irq->source &= ~BIT(src - 1);
+			if (irq->source)
+				irq->pending_latch = true;
 		}
 	}
 
@@ -194,7 +328,7 @@ void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
 	/* The GICv2 LR only holds five bits of priority. */
 	val |= (irq->priority >> 3) << GICH_LR_PRIORITY_SHIFT;
 
-	vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = val;
+	irq->on_lr = true;
 }
 
 void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr)
@@ -257,7 +391,7 @@ void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp)
 			GICH_VMCR_PRIMASK_SHIFT) << GICV_PMR_PRIORITY_SHIFT;
 }
 
-void vgic_v2_enable(struct kvm_vcpu *vcpu)
+void vgic_v2_reset(struct kvm_vcpu *vcpu)
 {
 	/*
 	 * By forcing VMCR to zero, the GIC will restore the binary
@@ -265,9 +399,6 @@ void vgic_v2_enable(struct kvm_vcpu *vcpu)
 	 * anyway.
 	 */
 	vcpu->arch.vgic_cpu.vgic_v2.vgic_vmcr = 0;
-
-	/* Get the show on the road... */
-	vcpu->arch.vgic_cpu.vgic_v2.vgic_hcr = GICH_HCR_EN;
 }
 
 /* check for overlapping regions and for regions crossing the end of memory */
@@ -289,6 +420,7 @@ static bool vgic_v2_check_base(gpa_t dist_base, gpa_t cpu_base)
 int vgic_v2_map_resources(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
+	unsigned int len;
 	int ret = 0;
 
 	if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) ||
@@ -312,10 +444,20 @@ int vgic_v2_map_resources(struct kvm *kvm)
 		return ret;
 	}
 
+	len = vgic_v2_init_cpuif_iodev(&dist->cpuif_iodev);
+	dist->cpuif_iodev.base_addr = dist->vgic_cpu_base;
+	dist->cpuif_iodev.iodev_type = IODEV_CPUIF;
+	dist->cpuif_iodev.redist_vcpu = NULL;
+
+	ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, dist->vgic_cpu_base,
+				      len, &dist->cpuif_iodev.dev);
+	if (ret)
+		return ret;
+
 	if (!static_branch_unlikely(&vgic_v2_cpuif_trap)) {
 		ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base,
 					    kvm_vgic_global_state.vcpu_base,
-					    KVM_VGIC_V2_CPU_SIZE, true);
+					    KVM_VGIC_V2_CPU_SIZE - SZ_4K, true);
 		if (ret) {
 			kvm_err("Unable to remap VGIC CPU to VCPU\n");
 			return ret;
@@ -385,6 +527,7 @@ int vgic_v2_probe(const struct gic_kvm_info *info)
 
 	kvm_vgic_global_state.can_emulate_gicv2 = true;
 	kvm_vgic_global_state.vcpu_base = info->vcpu.start;
+	kvm_vgic_global_state.gicc_base = info->gicc_base;
 	kvm_vgic_global_state.type = VGIC_V2;
 	kvm_vgic_global_state.max_gic_vcpus = VGIC_V2_MAX_CPUS;
 
@@ -423,16 +566,26 @@ static void save_lrs(struct kvm_vcpu *vcpu, void __iomem *base)
 
 void vgic_v2_save_state(struct kvm_vcpu *vcpu)
 {
+	struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2;
 	void __iomem *base = kvm_vgic_global_state.vctrl_base;
 	u64 used_lrs = vcpu->arch.vgic_cpu.vgic_v2.used_lrs;
 
 	if (!base)
 		return;
 
-	if (used_lrs) {
+	cpu_if->vgic_vmcr = readl_relaxed(kvm_vgic_global_state.vctrl_base + GICH_VMCR);
+
+	if (used_lrs)
 		save_lrs(vcpu, base);
-		writel_relaxed(0, base + GICH_HCR);
+
+	if (cpu_if->vgic_hcr & GICH_HCR_LRENPIE) {
+		u32 val = readl_relaxed(base + GICH_HCR);
+
+		cpu_if->vgic_hcr &= ~GICH_HCR_EOICOUNT;
+		cpu_if->vgic_hcr |= val & GICH_HCR_EOICOUNT;
 	}
+
+	writel_relaxed(0, base + GICH_HCR);
 }
 
 void vgic_v2_restore_state(struct kvm_vcpu *vcpu)
@@ -445,13 +598,10 @@ void vgic_v2_restore_state(struct kvm_vcpu *vcpu)
 	if (!base)
 		return;
 
-	if (used_lrs) {
-		writel_relaxed(cpu_if->vgic_hcr, base + GICH_HCR);
-		for (i = 0; i < used_lrs; i++) {
-			writel_relaxed(cpu_if->vgic_lr[i],
-				       base + GICH_LR0 + (i * 4));
-		}
-	}
+	writel_relaxed(cpu_if->vgic_hcr, base + GICH_HCR);
+
+	for (i = 0; i < used_lrs; i++)
+		writel_relaxed(cpu_if->vgic_lr[i], base + GICH_LR0 + (i * 4));
 }
 
 void vgic_v2_load(struct kvm_vcpu *vcpu)
@@ -468,6 +618,5 @@ void vgic_v2_put(struct kvm_vcpu *vcpu)
 {
 	struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2;
 
-	cpu_if->vgic_vmcr = readl_relaxed(kvm_vgic_global_state.vctrl_base + GICH_VMCR);
 	cpu_if->vgic_apr = readl_relaxed(kvm_vgic_global_state.vctrl_base + GICH_APR);
 }
diff --git a/arch/arm64/kvm/vgic/vgic-v3-nested.c b/arch/arm64/kvm/vgic/vgic-v3-nested.c
new file mode 100644
index 000000000000..61b44f3f2bf1
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-v3-nested.c
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/cpu.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <kvm/arm_vgic.h>
+
+#include <asm/kvm_arm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_nested.h>
+
+#include "vgic.h"
+
+#define ICH_LRN(n)	(ICH_LR0_EL2 + (n))
+#define ICH_AP0RN(n)	(ICH_AP0R0_EL2 + (n))
+#define ICH_AP1RN(n)	(ICH_AP1R0_EL2 + (n))
+
+struct mi_state {
+	u16	eisr;
+	u16	elrsr;
+	bool	pend;
+};
+
+/*
+ * The shadow registers loaded to the hardware when running a L2 guest
+ * with the virtual IMO/FMO bits set.
+ */
+struct shadow_if {
+	struct vgic_v3_cpu_if	cpuif;
+	unsigned long		lr_map;
+};
+
+static DEFINE_PER_CPU(struct shadow_if, shadow_if);
+
+static int lr_map_idx_to_shadow_idx(struct shadow_if *shadow_if, int idx)
+{
+	return hweight16(shadow_if->lr_map & (BIT(idx) - 1));
+}
+
+/*
+ * Nesting GICv3 support
+ *
+ * On a non-nesting VM (only running at EL0/EL1), the host hypervisor
+ * completely controls the interrupts injected via the list registers.
+ * Consequently, most of the state that is modified by the guest (by ACK-ing
+ * and EOI-ing interrupts) is synced by KVM on each entry/exit, so that we
+ * keep a semi-consistent view of the interrupts.
+ *
+ * This still applies for a NV guest, but only while "InHost" (either
+ * running at EL2, or at EL0 with HCR_EL2.{E2H.TGE}=={1,1}.
+ *
+ * When running a L2 guest ("not InHost"), things are radically different,
+ * as the L1 guest is in charge of provisioning the interrupts via its own
+ * view of the ICH_LR*_EL2 registers, which conveniently live in the VNCR
+ * page.  This means that the flow described above does work (there is no
+ * state to rebuild in the L0 hypervisor), and that most things happed on L2
+ * load/put:
+ *
+ * - on L2 load: move the in-memory L1 vGIC configuration into a shadow,
+ *   per-CPU data structure that is used to populate the actual LRs. This is
+ *   an extra copy that we could avoid, but life is short. In the process,
+ *   we remap any interrupt that has the HW bit set to the mapped interrupt
+ *   on the host, should the host consider it a HW one. This allows the HW
+ *   deactivation to take its course, such as for the timer.
+ *
+ * - on L2 put: perform the inverse transformation, so that the result of L2
+ *   running becomes visible to L1 in the VNCR-accessible registers.
+ *
+ * - there is nothing to do on L2 entry apart from enabling the vgic, as
+ *   everything will have happened on load. However, this is the point where
+ *   we detect that an interrupt targeting L1 and prepare the grand
+ *   switcheroo.
+ *
+ * - on L2 exit: resync the LRs and VMCR, emulate the HW bit, and deactivate
+ *   corresponding the L1 interrupt. The L0 active state will be cleared by
+ *   the HW if the L1 interrupt was itself backed by a HW interrupt.
+ *
+ * Maintenance Interrupt (MI) management:
+ *
+ * Since the L2 guest runs the vgic in its full glory, MIs get delivered and
+ * used as a handover point between L2 and L1.
+ *
+ * - on delivery of a MI to L0 while L2 is running: make the L1 MI pending,
+ *   and let it rip. This will initiate a vcpu_put() on L2, and allow L1 to
+ *   run and process the MI.
+ *
+ * - L1 MI is a fully virtual interrupt, not linked to the host's MI. Its
+ *   state must be computed at each entry/exit of the guest, much like we do
+ *   it for the PMU interrupt.
+ *
+ * - because most of the ICH_*_EL2 registers live in the VNCR page, the
+ *   quality of emulation is poor: L1 can setup the vgic so that an MI would
+ *   immediately fire, and not observe anything until the next exit.
+ *   Similarly, a pending MI is not immediately disabled by clearing
+ *   ICH_HCR_EL2.En. Trying to read ICH_MISR_EL2 would do the trick, for
+ *   example.
+ *
+ * System register emulation:
+ *
+ * We get two classes of registers:
+ *
+ * - those backed by memory (LRs, APRs, HCR, VMCR): L1 can freely access
+ *   them, and L0 doesn't see a thing.
+ *
+ * - those that always trap (ELRSR, EISR, MISR): these are status registers
+ *   that are built on the fly based on the in-memory state.
+ *
+ * Only L1 can access the ICH_*_EL2 registers. A non-NV L2 obviously cannot,
+ * and a NV L2 would either access the VNCR page provided by L1 (memory
+ * based registers), or see the access redirected to L1 (registers that
+ * trap) thanks to NV being set by L1.
+ */
+
+bool vgic_state_is_nested(struct kvm_vcpu *vcpu)
+{
+	u64 xmo;
+
+	if (is_nested_ctxt(vcpu)) {
+		xmo = __vcpu_sys_reg(vcpu, HCR_EL2) & (HCR_IMO | HCR_FMO);
+		WARN_ONCE(xmo && xmo != (HCR_IMO | HCR_FMO),
+			  "Separate virtual IRQ/FIQ settings not supported\n");
+
+		return !!xmo;
+	}
+
+	return false;
+}
+
+static struct shadow_if *get_shadow_if(void)
+{
+	return this_cpu_ptr(&shadow_if);
+}
+
+static bool lr_triggers_eoi(u64 lr)
+{
+	return !(lr & (ICH_LR_STATE | ICH_LR_HW)) && (lr & ICH_LR_EOI);
+}
+
+static void vgic_compute_mi_state(struct kvm_vcpu *vcpu, struct mi_state *mi_state)
+{
+	u16 eisr = 0, elrsr = 0;
+	bool pend = false;
+
+	for (int i = 0; i < kvm_vgic_global_state.nr_lr; i++) {
+		u64 lr = __vcpu_sys_reg(vcpu, ICH_LRN(i));
+
+		if (lr_triggers_eoi(lr))
+			eisr |= BIT(i);
+		if (!(lr & ICH_LR_STATE))
+			elrsr |= BIT(i);
+		pend |= (lr & ICH_LR_PENDING_BIT);
+	}
+
+	mi_state->eisr	= eisr;
+	mi_state->elrsr	= elrsr;
+	mi_state->pend	= pend;
+}
+
+u16 vgic_v3_get_eisr(struct kvm_vcpu *vcpu)
+{
+	struct mi_state mi_state;
+
+	vgic_compute_mi_state(vcpu, &mi_state);
+	return mi_state.eisr;
+}
+
+u16 vgic_v3_get_elrsr(struct kvm_vcpu *vcpu)
+{
+	struct mi_state mi_state;
+
+	vgic_compute_mi_state(vcpu, &mi_state);
+	return mi_state.elrsr;
+}
+
+u64 vgic_v3_get_misr(struct kvm_vcpu *vcpu)
+{
+	struct mi_state mi_state;
+	u64 reg = 0, hcr, vmcr;
+
+	hcr = __vcpu_sys_reg(vcpu, ICH_HCR_EL2);
+	vmcr = __vcpu_sys_reg(vcpu, ICH_VMCR_EL2);
+
+	vgic_compute_mi_state(vcpu, &mi_state);
+
+	if (mi_state.eisr)
+		reg |= ICH_MISR_EL2_EOI;
+
+	if (__vcpu_sys_reg(vcpu, ICH_HCR_EL2) & ICH_HCR_EL2_UIE) {
+		int used_lrs = kvm_vgic_global_state.nr_lr;
+
+		used_lrs -= hweight16(mi_state.elrsr);
+		reg |= (used_lrs <= 1) ? ICH_MISR_EL2_U : 0;
+	}
+
+	if ((hcr & ICH_HCR_EL2_LRENPIE) && FIELD_GET(ICH_HCR_EL2_EOIcount_MASK, hcr))
+		reg |= ICH_MISR_EL2_LRENP;
+
+	if ((hcr & ICH_HCR_EL2_NPIE) && !mi_state.pend)
+		reg |= ICH_MISR_EL2_NP;
+
+	if ((hcr & ICH_HCR_EL2_VGrp0EIE) && (vmcr & ICH_VMCR_ENG0_MASK))
+		reg |= ICH_MISR_EL2_VGrp0E;
+
+	if ((hcr & ICH_HCR_EL2_VGrp0DIE) && !(vmcr & ICH_VMCR_ENG0_MASK))
+		reg |= ICH_MISR_EL2_VGrp0D;
+
+	if ((hcr & ICH_HCR_EL2_VGrp1EIE) && (vmcr & ICH_VMCR_ENG1_MASK))
+		reg |= ICH_MISR_EL2_VGrp1E;
+
+	if ((hcr & ICH_HCR_EL2_VGrp1DIE) && !(vmcr & ICH_VMCR_ENG1_MASK))
+		reg |= ICH_MISR_EL2_VGrp1D;
+
+	return reg;
+}
+
+static u64 translate_lr_pintid(struct kvm_vcpu *vcpu, u64 lr)
+{
+	struct vgic_irq *irq;
+
+	if (!(lr & ICH_LR_HW))
+		return lr;
+
+	/* We have the HW bit set, check for validity of pINTID */
+	irq = vgic_get_vcpu_irq(vcpu, FIELD_GET(ICH_LR_PHYS_ID_MASK, lr));
+	/* If there was no real mapping, nuke the HW bit */
+	if (!irq || !irq->hw || irq->intid > VGIC_MAX_SPI)
+		lr &= ~ICH_LR_HW;
+
+	/* Translate the virtual mapping to the real one, even if invalid */
+	if (irq) {
+		lr &= ~ICH_LR_PHYS_ID_MASK;
+		lr |= FIELD_PREP(ICH_LR_PHYS_ID_MASK, (u64)irq->hwintid);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return lr;
+}
+
+/*
+ * For LRs which have HW bit set such as timer interrupts, we modify them to
+ * have the host hardware interrupt number instead of the virtual one programmed
+ * by the guest hypervisor.
+ */
+static void vgic_v3_create_shadow_lr(struct kvm_vcpu *vcpu,
+				     struct vgic_v3_cpu_if *s_cpu_if)
+{
+	struct shadow_if *shadow_if;
+
+	shadow_if = container_of(s_cpu_if, struct shadow_if, cpuif);
+	shadow_if->lr_map = 0;
+
+	for (int i = 0; i < kvm_vgic_global_state.nr_lr; i++) {
+		u64 lr = __vcpu_sys_reg(vcpu, ICH_LRN(i));
+
+		if (!(lr & ICH_LR_STATE))
+			continue;
+
+		lr = translate_lr_pintid(vcpu, lr);
+
+		s_cpu_if->vgic_lr[hweight16(shadow_if->lr_map)] = lr;
+		shadow_if->lr_map |= BIT(i);
+	}
+
+	s_cpu_if->used_lrs = hweight16(shadow_if->lr_map);
+}
+
+void vgic_v3_flush_nested(struct kvm_vcpu *vcpu)
+{
+	u64 val = __vcpu_sys_reg(vcpu, ICH_HCR_EL2);
+
+	write_sysreg_s(val | vgic_ich_hcr_trap_bits(), SYS_ICH_HCR_EL2);
+}
+
+void vgic_v3_sync_nested(struct kvm_vcpu *vcpu)
+{
+	struct shadow_if *shadow_if = get_shadow_if();
+	int i;
+
+	for_each_set_bit(i, &shadow_if->lr_map, kvm_vgic_global_state.nr_lr) {
+		u64 val, host_lr, lr;
+
+		host_lr = __gic_v3_get_lr(lr_map_idx_to_shadow_idx(shadow_if, i));
+
+		/* Propagate the new LR state */
+		lr = __vcpu_sys_reg(vcpu, ICH_LRN(i));
+		val = lr & ~ICH_LR_STATE;
+		val |= host_lr & ICH_LR_STATE;
+		__vcpu_assign_sys_reg(vcpu, ICH_LRN(i), val);
+
+		/*
+		 * Deactivation of a HW interrupt: the LR must have the HW
+		 * bit set, have been in a non-invalid state before the run,
+		 * and now be in an invalid state. If any of that doesn't
+		 * hold, we're done with this LR.
+		 */
+		if (!((lr & ICH_LR_HW) && (lr & ICH_LR_STATE) &&
+		      !(host_lr & ICH_LR_STATE)))
+			continue;
+
+		/*
+		 * If we had a HW lr programmed by the guest hypervisor, we
+		 * need to emulate the HW effect between the guest hypervisor
+		 * and the nested guest.
+		 */
+		vgic_v3_deactivate(vcpu, FIELD_GET(ICH_LR_PHYS_ID_MASK, lr));
+	}
+
+	/* We need these to be synchronised to generate the MI */
+	__vcpu_assign_sys_reg(vcpu, ICH_VMCR_EL2, read_sysreg_s(SYS_ICH_VMCR_EL2));
+	__vcpu_rmw_sys_reg(vcpu, ICH_HCR_EL2, &=, ~ICH_HCR_EL2_EOIcount);
+	__vcpu_rmw_sys_reg(vcpu, ICH_HCR_EL2, |=, read_sysreg_s(SYS_ICH_HCR_EL2) & ICH_HCR_EL2_EOIcount);
+
+	write_sysreg_s(0, SYS_ICH_HCR_EL2);
+	isb();
+
+	vgic_v3_nested_update_mi(vcpu);
+}
+
+static void vgic_v3_create_shadow_state(struct kvm_vcpu *vcpu,
+					struct vgic_v3_cpu_if *s_cpu_if)
+{
+	struct vgic_v3_cpu_if *host_if = &vcpu->arch.vgic_cpu.vgic_v3;
+	int i;
+
+	s_cpu_if->vgic_hcr = __vcpu_sys_reg(vcpu, ICH_HCR_EL2);
+	s_cpu_if->vgic_vmcr = __vcpu_sys_reg(vcpu, ICH_VMCR_EL2);
+	s_cpu_if->vgic_sre = host_if->vgic_sre;
+
+	for (i = 0; i < 4; i++) {
+		s_cpu_if->vgic_ap0r[i] = __vcpu_sys_reg(vcpu, ICH_AP0RN(i));
+		s_cpu_if->vgic_ap1r[i] = __vcpu_sys_reg(vcpu, ICH_AP1RN(i));
+	}
+
+	vgic_v3_create_shadow_lr(vcpu, s_cpu_if);
+}
+
+void vgic_v3_load_nested(struct kvm_vcpu *vcpu)
+{
+	struct shadow_if *shadow_if = get_shadow_if();
+	struct vgic_v3_cpu_if *cpu_if = &shadow_if->cpuif;
+
+	BUG_ON(!vgic_state_is_nested(vcpu));
+
+	vgic_v3_create_shadow_state(vcpu, cpu_if);
+
+	__vgic_v3_restore_vmcr_aprs(cpu_if);
+	__vgic_v3_activate_traps(cpu_if);
+
+	for (int i = 0; i < cpu_if->used_lrs; i++)
+		__gic_v3_set_lr(cpu_if->vgic_lr[i], i);
+
+	/*
+	 * Propagate the number of used LRs for the benefit of the HYP
+	 * GICv3 emulation code. Yes, this is a pretty sorry hack.
+	 */
+	vcpu->arch.vgic_cpu.vgic_v3.used_lrs = cpu_if->used_lrs;
+}
+
+void vgic_v3_put_nested(struct kvm_vcpu *vcpu)
+{
+	struct shadow_if *shadow_if = get_shadow_if();
+	struct vgic_v3_cpu_if *s_cpu_if = &shadow_if->cpuif;
+	int i;
+
+	__vgic_v3_save_aprs(s_cpu_if);
+
+	for (i = 0; i < 4; i++) {
+		__vcpu_assign_sys_reg(vcpu, ICH_AP0RN(i), s_cpu_if->vgic_ap0r[i]);
+		__vcpu_assign_sys_reg(vcpu, ICH_AP1RN(i), s_cpu_if->vgic_ap1r[i]);
+	}
+
+	for (i = 0; i < s_cpu_if->used_lrs; i++)
+		__gic_v3_set_lr(0, i);
+
+	__vgic_v3_deactivate_traps(s_cpu_if);
+
+	vcpu->arch.vgic_cpu.vgic_v3.used_lrs = 0;
+}
+
+/*
+ * If we exit a L2 VM with a pending maintenance interrupt from the GIC,
+ * then we need to forward this to L1 so that it can re-sync the appropriate
+ * LRs and sample level triggered interrupts again.
+ */
+void vgic_v3_handle_nested_maint_irq(struct kvm_vcpu *vcpu)
+{
+	bool state = read_sysreg_s(SYS_ICH_MISR_EL2);
+
+	/* This will force a switch back to L1 if the level is high */
+	kvm_vgic_inject_irq(vcpu->kvm, vcpu,
+			    vcpu->kvm->arch.vgic.mi_intid, state, vcpu);
+
+	sysreg_clear_set_s(SYS_ICH_HCR_EL2, ICH_HCR_EL2_En, 0);
+}
+
+void vgic_v3_nested_update_mi(struct kvm_vcpu *vcpu)
+{
+	bool level;
+
+	level = (__vcpu_sys_reg(vcpu, ICH_HCR_EL2) & ICH_HCR_EL2_En) && vgic_v3_get_misr(vcpu);
+	kvm_vgic_inject_irq(vcpu->kvm, vcpu,
+			    vcpu->kvm->arch.vgic.mi_intid, level, vcpu);
+}
diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c
index f267bc2486a1..1d6dd1b545bd 100644
--- a/arch/arm64/kvm/vgic/vgic-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-v3.c
@@ -6,11 +6,13 @@
 #include <linux/kstrtox.h>
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
+#include <linux/string_choices.h>
 #include <kvm/arm_vgic.h>
 #include <asm/kvm_hyp.h>
 #include <asm/kvm_mmu.h>
 #include <asm/kvm_asm.h>
 
+#include "vgic-mmio.h"
 #include "vgic.h"
 
 static bool group0_trap;
@@ -19,11 +21,48 @@ static bool common_trap;
 static bool dir_trap;
 static bool gicv4_enable;
 
-void vgic_v3_set_underflow(struct kvm_vcpu *vcpu)
+void vgic_v3_configure_hcr(struct kvm_vcpu *vcpu,
+			   struct ap_list_summary *als)
 {
 	struct vgic_v3_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v3;
 
-	cpuif->vgic_hcr |= ICH_HCR_UIE;
+	if (!irqchip_in_kernel(vcpu->kvm))
+		return;
+
+	cpuif->vgic_hcr = ICH_HCR_EL2_En;
+
+	if (irqs_pending_outside_lrs(als))
+		cpuif->vgic_hcr |= ICH_HCR_EL2_NPIE;
+	if (irqs_active_outside_lrs(als))
+		cpuif->vgic_hcr |= ICH_HCR_EL2_LRENPIE;
+	if (irqs_outside_lrs(als))
+		cpuif->vgic_hcr |= ICH_HCR_EL2_UIE;
+
+	if (!als->nr_sgi)
+		cpuif->vgic_hcr |= ICH_HCR_EL2_vSGIEOICount;
+
+	cpuif->vgic_hcr |= (cpuif->vgic_vmcr & ICH_VMCR_ENG0_MASK) ?
+		ICH_HCR_EL2_VGrp0DIE : ICH_HCR_EL2_VGrp0EIE;
+	cpuif->vgic_hcr |= (cpuif->vgic_vmcr & ICH_VMCR_ENG1_MASK) ?
+		ICH_HCR_EL2_VGrp1DIE : ICH_HCR_EL2_VGrp1EIE;
+
+	/*
+	 * Dealing with EOImode=1 is a massive source of headache. Not
+	 * only do we need to track that we have active interrupts
+	 * outside of the LRs and force DIR to be trapped, we also
+	 * need to deal with SPIs that can be deactivated on another
+	 * CPU.
+	 *
+	 * On systems that do not implement TDIR, force the bit in the
+	 * shadow state anyway to avoid IPI-ing on these poor sods.
+	 *
+	 * Note that we set the trap irrespective of EOIMode, as that
+	 * can change behind our back without any warning...
+	 */
+	if (!cpus_have_final_cap(ARM64_HAS_ICH_HCR_EL2_TDIR) ||
+	    irqs_active_outside_lrs(als)		     ||
+	    atomic_read(&vcpu->kvm->arch.vgic.active_spis))
+		cpuif->vgic_hcr |= ICH_HCR_EL2_TDIR;
 }
 
 static bool lr_signals_eoi_mi(u64 lr_val)
@@ -32,84 +71,238 @@ static bool lr_signals_eoi_mi(u64 lr_val)
 	       !(lr_val & ICH_LR_HW);
 }
 
+static void vgic_v3_fold_lr(struct kvm_vcpu *vcpu, u64 val)
+{
+	struct vgic_irq *irq;
+	bool is_v2_sgi = false;
+	bool deactivated;
+	u32 intid;
+
+	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
+		intid = val & ICH_LR_VIRTUAL_ID_MASK;
+	} else {
+		intid = val & GICH_LR_VIRTUALID;
+		is_v2_sgi = vgic_irq_is_sgi(intid);
+	}
+
+	irq = vgic_get_vcpu_irq(vcpu, intid);
+	if (!irq)	/* An LPI could have been unmapped. */
+		return;
+
+	scoped_guard(raw_spinlock, &irq->irq_lock) {
+		/* Always preserve the active bit for !LPIs, note deactivation */
+		if (irq->intid >= VGIC_MIN_LPI)
+			val &= ~ICH_LR_ACTIVE_BIT;
+		deactivated = irq->active && !(val & ICH_LR_ACTIVE_BIT);
+		irq->active = !!(val & ICH_LR_ACTIVE_BIT);
+
+		/* Edge is the only case where we preserve the pending bit */
+		if (irq->config == VGIC_CONFIG_EDGE &&
+		    (val & ICH_LR_PENDING_BIT))
+			irq->pending_latch = true;
+
+		/*
+		 * Clear soft pending state when level irqs have been acked.
+		 */
+		if (irq->config == VGIC_CONFIG_LEVEL && !(val & ICH_LR_STATE))
+			irq->pending_latch = false;
+
+		if (is_v2_sgi) {
+			u8 cpuid = FIELD_GET(GICH_LR_PHYSID_CPUID, val);
+
+			if (irq->active)
+				irq->active_source = cpuid;
+
+			if (val & ICH_LR_PENDING_BIT)
+				irq->source |= BIT(cpuid);
+		}
+
+		/* Handle resampling for mapped interrupts if required */
+		vgic_irq_handle_resampling(irq, deactivated, val & ICH_LR_PENDING_BIT);
+
+		irq->on_lr = false;
+	}
+
+	/* Notify fds when the guest EOI'ed a level-triggered SPI, and drop the refcount */
+	if (deactivated && lr_signals_eoi_mi(val) && vgic_valid_spi(vcpu->kvm, intid)) {
+		kvm_notify_acked_irq(vcpu->kvm, 0,
+				     intid - VGIC_NR_PRIVATE_IRQS);
+		atomic_dec_if_positive(&vcpu->kvm->arch.vgic.active_spis);
+	}
+
+	vgic_put_irq(vcpu->kvm, irq);
+}
+
+static u64 vgic_v3_compute_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq);
+
+static void vgic_v3_deactivate_phys(u32 intid)
+{
+	if (cpus_have_final_cap(ARM64_HAS_GICV5_LEGACY))
+		gic_insn(intid | FIELD_PREP(GICV5_GIC_CDDI_TYPE_MASK, 1), CDDI);
+	else
+		gic_write_dir(intid);
+}
+
 void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	struct vgic_v3_cpu_if *cpuif = &vgic_cpu->vgic_v3;
-	u32 model = vcpu->kvm->arch.vgic.vgic_model;
-	int lr;
+	u32 eoicount = FIELD_GET(ICH_HCR_EL2_EOIcount, cpuif->vgic_hcr);
+	struct vgic_irq *irq;
 
 	DEBUG_SPINLOCK_BUG_ON(!irqs_disabled());
 
-	cpuif->vgic_hcr &= ~ICH_HCR_UIE;
+	for (int lr = 0; lr < cpuif->used_lrs; lr++)
+		vgic_v3_fold_lr(vcpu, cpuif->vgic_lr[lr]);
 
-	for (lr = 0; lr < cpuif->used_lrs; lr++) {
-		u64 val = cpuif->vgic_lr[lr];
-		u32 intid, cpuid;
-		struct vgic_irq *irq;
-		bool is_v2_sgi = false;
-		bool deactivated;
-
-		cpuid = val & GICH_LR_PHYSID_CPUID;
-		cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT;
+	/*
+	 * EOIMode=0: use EOIcount to emulate deactivation. We are
+	 * guaranteed to deactivate in reverse order of the activation, so
+	 * just pick one active interrupt after the other in the ap_list,
+	 * and replay the deactivation as if the CPU was doing it. We also
+	 * rely on priority drop to have taken place, and the list to be
+	 * sorted by priority.
+	 */
+	list_for_each_entry(irq, &vgic_cpu->ap_list_head, ap_list) {
+		u64 lr;
 
-		if (model == KVM_DEV_TYPE_ARM_VGIC_V3) {
-			intid = val & ICH_LR_VIRTUAL_ID_MASK;
+		/*
+		 * I would have loved to write this using a scoped_guard(),
+		 * but using 'continue' here is a total train wreck.
+		 */
+		if (!eoicount) {
+			break;
 		} else {
-			intid = val & GICH_LR_VIRTUALID;
-			is_v2_sgi = vgic_irq_is_sgi(intid);
+			guard(raw_spinlock)(&irq->irq_lock);
+
+			if (!(likely(vgic_target_oracle(irq) == vcpu) &&
+			      irq->active))
+				continue;
+
+			lr = vgic_v3_compute_lr(vcpu, irq) & ~ICH_LR_ACTIVE_BIT;
 		}
 
-		/* Notify fds when the guest EOI'ed a level-triggered IRQ */
-		if (lr_signals_eoi_mi(val) && vgic_valid_spi(vcpu->kvm, intid))
-			kvm_notify_acked_irq(vcpu->kvm, 0,
-					     intid - VGIC_NR_PRIVATE_IRQS);
+		if (lr & ICH_LR_HW)
+			vgic_v3_deactivate_phys(FIELD_GET(ICH_LR_PHYS_ID_MASK, lr));
 
-		irq = vgic_get_vcpu_irq(vcpu, intid);
-		if (!irq)	/* An LPI could have been unmapped. */
-			continue;
+		vgic_v3_fold_lr(vcpu, lr);
+		eoicount--;
+	}
 
-		raw_spin_lock(&irq->irq_lock);
+	cpuif->used_lrs = 0;
+}
 
-		/* Always preserve the active bit, note deactivation */
-		deactivated = irq->active && !(val & ICH_LR_ACTIVE_BIT);
-		irq->active = !!(val & ICH_LR_ACTIVE_BIT);
+void vgic_v3_deactivate(struct kvm_vcpu *vcpu, u64 val)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_v3_cpu_if *cpuif = &vgic_cpu->vgic_v3;
+	u32 model = vcpu->kvm->arch.vgic.vgic_model;
+	struct kvm_vcpu *target_vcpu = NULL;
+	bool mmio = false, is_v2_sgi;
+	struct vgic_irq *irq;
+	unsigned long flags;
+	u64 lr = 0;
+	u8 cpuid;
 
-		if (irq->active && is_v2_sgi)
-			irq->active_source = cpuid;
+	/* Snapshot CPUID, and remove it from the INTID */
+	cpuid = FIELD_GET(GENMASK_ULL(12, 10), val);
+	val &= ~GENMASK_ULL(12, 10);
 
-		/* Edge is the only case where we preserve the pending bit */
-		if (irq->config == VGIC_CONFIG_EDGE &&
-		    (val & ICH_LR_PENDING_BIT)) {
-			irq->pending_latch = true;
+	is_v2_sgi = (model == KVM_DEV_TYPE_ARM_VGIC_V2 &&
+		     val < VGIC_NR_SGIS);
 
-			if (is_v2_sgi)
-				irq->source |= (1 << cpuid);
-		}
+	/*
+	 * We only deal with DIR when EOIMode==1, and only for SGI,
+	 * PPI or SPI.
+	 */
+	if (!(cpuif->vgic_vmcr & ICH_VMCR_EOIM_MASK) ||
+	    val >= vcpu->kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS)
+		return;
+
+	/* Make sure we're in the same context as LR handling */
+	local_irq_save(flags);
+
+	irq = vgic_get_vcpu_irq(vcpu, val);
+	if (WARN_ON_ONCE(!irq))
+		goto out;
+
+	/*
+	 * EOIMode=1: we must rely on traps to handle deactivate of
+	 * overflowing interrupts, as there is no ordering guarantee and
+	 * EOIcount isn't being incremented. Priority drop will have taken
+	 * place, as ICV_EOIxR_EL1 only affects the APRs and not the LRs.
+	 *
+	 * Three possibities:
+	 *
+	 * - The irq is not queued on any CPU, and there is nothing to
+	 *   do,
+	 *
+	 * - Or the irq is in an LR, meaning that its state is not
+	 *   directly observable. Treat it bluntly by making it as if
+	 *   this was a write to GICD_ICACTIVER, which will force an
+	 *   exit on all vcpus. If it hurts, don't do that.
+	 *
+	 * - Or the irq is active, but not in an LR, and we can
+	 *   directly deactivate it by building a pseudo-LR, fold it,
+	 *   and queue a request to prune the resulting ap_list,
+	 *
+	 * Special care must be taken to match the source CPUID when
+	 * deactivating a GICv2 SGI.
+	 */
+	scoped_guard(raw_spinlock, &irq->irq_lock) {
+		target_vcpu = irq->vcpu;
+
+		/* Not on any ap_list? */
+		if (!target_vcpu)
+			goto put;
 
 		/*
-		 * Clear soft pending state when level irqs have been acked.
+		 * Urgh. We're deactivating something that we cannot
+		 * observe yet... Big hammer time.
 		 */
-		if (irq->config == VGIC_CONFIG_LEVEL && !(val & ICH_LR_STATE))
-			irq->pending_latch = false;
+		if (irq->on_lr) {
+			mmio = true;
+			goto put;
+		}
 
-		/* Handle resampling for mapped interrupts if required */
-		vgic_irq_handle_resampling(irq, deactivated, val & ICH_LR_PENDING_BIT);
+		/* GICv2 SGI: check that the cpuid matches */
+		if (is_v2_sgi && irq->active_source != cpuid) {
+			target_vcpu = NULL;
+			goto put;
+		}
 
-		raw_spin_unlock(&irq->irq_lock);
-		vgic_put_irq(vcpu->kvm, irq);
+		/* (with a Dalek voice) DEACTIVATE!!!! */
+		lr = vgic_v3_compute_lr(vcpu, irq) & ~ICH_LR_ACTIVE_BIT;
 	}
 
-	cpuif->used_lrs = 0;
+	if (lr & ICH_LR_HW)
+		vgic_v3_deactivate_phys(FIELD_GET(ICH_LR_PHYS_ID_MASK, lr));
+
+	vgic_v3_fold_lr(vcpu, lr);
+
+put:
+	vgic_put_irq(vcpu->kvm, irq);
+
+out:
+	local_irq_restore(flags);
+
+	if (mmio)
+		vgic_mmio_write_cactive(vcpu, (val / 32) * 4, 4, BIT(val % 32));
+
+	/* Force the ap_list to be pruned */
+	if (target_vcpu)
+		kvm_make_request(KVM_REQ_VGIC_PROCESS_UPDATE, target_vcpu);
 }
 
 /* Requires the irq to be locked already */
-void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
+static u64 vgic_v3_compute_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 {
 	u32 model = vcpu->kvm->arch.vgic.vgic_model;
 	u64 val = irq->intid;
 	bool allow_pending = true, is_v2_sgi;
 
+	WARN_ON(irq->on_lr);
+
 	is_v2_sgi = (vgic_irq_is_sgi(irq->intid) &&
 		     model == KVM_DEV_TYPE_ARM_VGIC_V2);
 
@@ -149,6 +342,35 @@ void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
 	if (allow_pending && irq_is_pending(irq)) {
 		val |= ICH_LR_PENDING_BIT;
 
+		if (is_v2_sgi) {
+			u32 src = ffs(irq->source);
+
+			if (WARN_RATELIMIT(!src, "No SGI source for INTID %d\n",
+					   irq->intid))
+				return 0;
+
+			val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT;
+			if (irq->source & ~BIT(src - 1))
+				val |= ICH_LR_EOI;
+		}
+	}
+
+	if (irq->group)
+		val |= ICH_LR_GROUP;
+
+	val |= (u64)irq->priority << ICH_LR_PRIORITY_SHIFT;
+
+	return val;
+}
+
+void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
+{
+	u32 model = vcpu->kvm->arch.vgic.vgic_model;
+	u64 val = vgic_v3_compute_lr(vcpu, irq);
+
+	vcpu->arch.vgic_cpu.vgic_v3.vgic_lr[lr] = val;
+
+	if (val & ICH_LR_PENDING_BIT) {
 		if (irq->config == VGIC_CONFIG_EDGE)
 			irq->pending_latch = false;
 
@@ -156,16 +378,9 @@ void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
 		    model == KVM_DEV_TYPE_ARM_VGIC_V2) {
 			u32 src = ffs(irq->source);
 
-			if (WARN_RATELIMIT(!src, "No SGI source for INTID %d\n",
-					   irq->intid))
-				return;
-
-			val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT;
-			irq->source &= ~(1 << (src - 1));
-			if (irq->source) {
+			irq->source &= ~BIT(src - 1);
+			if (irq->source)
 				irq->pending_latch = true;
-				val |= ICH_LR_EOI;
-			}
 		}
 	}
 
@@ -178,12 +393,7 @@ void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
 	if (vgic_irq_is_mapped_level(irq) && (val & ICH_LR_PENDING_BIT))
 		irq->line_level = false;
 
-	if (irq->group)
-		val |= ICH_LR_GROUP;
-
-	val |= (u64)irq->priority << ICH_LR_PRIORITY_SHIFT;
-
-	vcpu->arch.vgic_cpu.vgic_v3.vgic_lr[lr] = val;
+	irq->on_lr = true;
 }
 
 void vgic_v3_clear_lr(struct kvm_vcpu *vcpu, int lr)
@@ -257,7 +467,7 @@ void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp)
 	GIC_BASER_CACHEABILITY(GICR_PENDBASER, OUTER, SameAsInner)	| \
 	GIC_BASER_SHAREABILITY(GICR_PENDBASER, InnerShareable))
 
-void vgic_v3_enable(struct kvm_vcpu *vcpu)
+void vgic_v3_reset(struct kvm_vcpu *vcpu)
 {
 	struct vgic_v3_cpu_if *vgic_v3 = &vcpu->arch.vgic_cpu.vgic_v3;
 
@@ -283,35 +493,24 @@ void vgic_v3_enable(struct kvm_vcpu *vcpu)
 		vgic_v3->vgic_sre = 0;
 	}
 
-	vcpu->arch.vgic_cpu.num_id_bits = (kvm_vgic_global_state.ich_vtr_el2 &
-					   ICH_VTR_ID_BITS_MASK) >>
-					   ICH_VTR_ID_BITS_SHIFT;
-	vcpu->arch.vgic_cpu.num_pri_bits = ((kvm_vgic_global_state.ich_vtr_el2 &
-					    ICH_VTR_PRI_BITS_MASK) >>
-					    ICH_VTR_PRI_BITS_SHIFT) + 1;
-
-	/* Get the show on the road... */
-	vgic_v3->vgic_hcr = ICH_HCR_EN;
+	vcpu->arch.vgic_cpu.num_id_bits = FIELD_GET(ICH_VTR_EL2_IDbits,
+						    kvm_vgic_global_state.ich_vtr_el2);
+	vcpu->arch.vgic_cpu.num_pri_bits = FIELD_GET(ICH_VTR_EL2_PRIbits,
+						     kvm_vgic_global_state.ich_vtr_el2) + 1;
 }
 
 void vcpu_set_ich_hcr(struct kvm_vcpu *vcpu)
 {
 	struct vgic_v3_cpu_if *vgic_v3 = &vcpu->arch.vgic_cpu.vgic_v3;
 
-	/* Hide GICv3 sysreg if necessary */
-	if (!kvm_has_gicv3(vcpu->kvm)) {
-		vgic_v3->vgic_hcr |= ICH_HCR_TALL0 | ICH_HCR_TALL1 | ICH_HCR_TC;
+	if (!vgic_is_v3(vcpu->kvm))
 		return;
-	}
 
-	if (group0_trap)
-		vgic_v3->vgic_hcr |= ICH_HCR_TALL0;
-	if (group1_trap)
-		vgic_v3->vgic_hcr |= ICH_HCR_TALL1;
-	if (common_trap)
-		vgic_v3->vgic_hcr |= ICH_HCR_TC;
-	if (dir_trap)
-		vgic_v3->vgic_hcr |= ICH_HCR_TDIR;
+	/* Hide GICv3 sysreg if necessary */
+	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2 ||
+	    !irqchip_in_kernel(vcpu->kvm))
+		vgic_v3->vgic_hcr |= (ICH_HCR_EL2_TALL0 | ICH_HCR_EL2_TALL1 |
+				      ICH_HCR_EL2_TC);
 }
 
 int vgic_v3_lpi_sync_pending_status(struct kvm *kvm, struct vgic_irq *irq)
@@ -588,6 +787,7 @@ int vgic_v3_map_resources(struct kvm *kvm)
 }
 
 DEFINE_STATIC_KEY_FALSE(vgic_v3_cpuif_trap);
+DEFINE_STATIC_KEY_FALSE(vgic_v3_has_v2_compat);
 
 static int __init early_group0_trap_cfg(char *buf)
 {
@@ -631,8 +831,53 @@ static const struct midr_range broken_seis[] = {
 
 static bool vgic_v3_broken_seis(void)
 {
-	return ((kvm_vgic_global_state.ich_vtr_el2 & ICH_VTR_SEIS_MASK) &&
-		is_midr_in_range_list(read_cpuid_id(), broken_seis));
+	return (is_kernel_in_hyp_mode() &&
+		is_midr_in_range_list(broken_seis) &&
+		(read_sysreg_s(SYS_ICH_VTR_EL2) & ICH_VTR_EL2_SEIS));
+}
+
+void noinstr kvm_compute_ich_hcr_trap_bits(struct alt_instr *alt,
+					   __le32 *origptr, __le32 *updptr,
+					   int nr_inst)
+{
+	u32 insn, oinsn, rd;
+	u64 hcr = 0;
+
+	if (cpus_have_cap(ARM64_WORKAROUND_CAVIUM_30115)) {
+		group0_trap = true;
+		group1_trap = true;
+	}
+
+	if (vgic_v3_broken_seis()) {
+		/* We know that these machines have ICH_HCR_EL2.TDIR */
+		group0_trap = true;
+		group1_trap = true;
+		dir_trap = true;
+	}
+
+	if (!cpus_have_cap(ARM64_HAS_ICH_HCR_EL2_TDIR))
+		common_trap = true;
+
+	if (group0_trap)
+		hcr |= ICH_HCR_EL2_TALL0;
+	if (group1_trap)
+		hcr |= ICH_HCR_EL2_TALL1;
+	if (common_trap)
+		hcr |= ICH_HCR_EL2_TC;
+	if (dir_trap)
+		hcr |= ICH_HCR_EL2_TDIR;
+
+	/* Compute target register */
+	oinsn = le32_to_cpu(*origptr);
+	rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD, oinsn);
+
+	/* movz rd, #(val & 0xffff) */
+	insn = aarch64_insn_gen_movewide(rd,
+					 (u16)hcr,
+					 0,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_ZERO);
+	*updptr = cpu_to_le32(insn);
 }
 
 /**
@@ -646,6 +891,7 @@ int vgic_v3_probe(const struct gic_kvm_info *info)
 {
 	u64 ich_vtr_el2 = kvm_call_hyp_ret(__vgic_v3_get_gic_config);
 	bool has_v2;
+	u64 traps;
 	int ret;
 
 	has_v2 = ich_vtr_el2 >> 63;
@@ -663,9 +909,9 @@ int vgic_v3_probe(const struct gic_kvm_info *info)
 	if (info->has_v4) {
 		kvm_vgic_global_state.has_gicv4 = gicv4_enable;
 		kvm_vgic_global_state.has_gicv4_1 = info->has_v4_1 && gicv4_enable;
-		kvm_info("GICv4%s support %sabled\n",
+		kvm_info("GICv4%s support %s\n",
 			 kvm_vgic_global_state.has_gicv4_1 ? ".1" : "",
-			 gicv4_enable ? "en" : "dis");
+			 str_enabled_disabled(gicv4_enable));
 	}
 
 	kvm_vgic_global_state.vcpu_base = 0;
@@ -697,29 +943,25 @@ int vgic_v3_probe(const struct gic_kvm_info *info)
 	if (kvm_vgic_global_state.vcpu_base == 0)
 		kvm_info("disabling GICv2 emulation\n");
 
-	if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_30115)) {
-		group0_trap = true;
-		group1_trap = true;
-	}
+	/*
+	 * Flip the static branch if the HW supports v2, even if we're
+	 * not using it (such as in protected mode).
+	 */
+	if (has_v2)
+		static_branch_enable(&vgic_v3_has_v2_compat);
 
 	if (vgic_v3_broken_seis()) {
 		kvm_info("GICv3 with broken locally generated SEI\n");
-
-		kvm_vgic_global_state.ich_vtr_el2 &= ~ICH_VTR_SEIS_MASK;
-		group0_trap = true;
-		group1_trap = true;
-		if (ich_vtr_el2 & ICH_VTR_TDS_MASK)
-			dir_trap = true;
-		else
-			common_trap = true;
+		kvm_vgic_global_state.ich_vtr_el2 &= ~ICH_VTR_EL2_SEIS;
 	}
 
-	if (group0_trap || group1_trap || common_trap | dir_trap) {
+	traps = vgic_ich_hcr_trap_bits();
+	if (traps) {
 		kvm_info("GICv3 sysreg trapping enabled ([%s%s%s%s], reduced performance)\n",
-			 group0_trap ? "G0" : "",
-			 group1_trap ? "G1" : "",
-			 common_trap ? "C"  : "",
-			 dir_trap    ? "D"  : "");
+			 (traps & ICH_HCR_EL2_TALL0) ? "G0" : "",
+			 (traps & ICH_HCR_EL2_TALL1) ? "G1" : "",
+			 (traps & ICH_HCR_EL2_TC)    ? "C"  : "",
+			 (traps & ICH_HCR_EL2_TDIR)  ? "D"  : "");
 		static_branch_enable(&vgic_v3_cpuif_trap);
 	}
 
@@ -734,7 +976,14 @@ void vgic_v3_load(struct kvm_vcpu *vcpu)
 {
 	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
 
-	kvm_call_hyp(__vgic_v3_restore_vmcr_aprs, cpu_if);
+	/* If the vgic is nested, perform the full state loading */
+	if (vgic_state_is_nested(vcpu)) {
+		vgic_v3_load_nested(vcpu);
+		return;
+	}
+
+	if (likely(!is_protected_kvm_enabled()))
+		kvm_call_hyp(__vgic_v3_restore_vmcr_aprs, cpu_if);
 
 	if (has_vhe())
 		__vgic_v3_activate_traps(cpu_if);
@@ -746,7 +995,13 @@ void vgic_v3_put(struct kvm_vcpu *vcpu)
 {
 	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
 
-	kvm_call_hyp(__vgic_v3_save_vmcr_aprs, cpu_if);
+	if (vgic_state_is_nested(vcpu)) {
+		vgic_v3_put_nested(vcpu);
+		return;
+	}
+
+	if (likely(!is_protected_kvm_enabled()))
+		kvm_call_hyp(__vgic_v3_save_aprs, cpu_if);
 	WARN_ON(vgic_v4_put(vcpu));
 
 	if (has_vhe())
diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c
index eedecbbbcf31..09c3e9eb23f8 100644
--- a/arch/arm64/kvm/vgic/vgic-v4.c
+++ b/arch/arm64/kvm/vgic/vgic-v4.c
@@ -163,6 +163,7 @@ static void vgic_v4_disable_vsgis(struct kvm_vcpu *vcpu)
 		struct vgic_irq *irq = vgic_get_vcpu_irq(vcpu, i);
 		struct irq_desc *desc;
 		unsigned long flags;
+		bool pending;
 		int ret;
 
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
@@ -173,9 +174,11 @@ static void vgic_v4_disable_vsgis(struct kvm_vcpu *vcpu)
 		irq->hw = false;
 		ret = irq_get_irqchip_state(irq->host_irq,
 					    IRQCHIP_STATE_PENDING,
-					    &irq->pending_latch);
+					    &pending);
 		WARN_ON(ret);
 
+		irq->pending_latch = pending;
+
 		desc = irq_to_desc(irq->host_irq);
 		irq_domain_deactivate_irq(irq_desc_get_irq_data(desc));
 	unlock:
@@ -336,14 +339,30 @@ void vgic_v4_teardown(struct kvm *kvm)
 	its_vm->vpes = NULL;
 }
 
+static inline bool vgic_v4_want_doorbell(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_get_flag(vcpu, IN_WFI))
+		return true;
+
+	if (likely(!vcpu_has_nv(vcpu)))
+		return false;
+
+	/*
+	 * GICv4 hardware is only ever used for the L1. Mark the vPE (i.e. the
+	 * L1 context) nonresident and request a doorbell to kick us out of the
+	 * L2 when an IRQ becomes pending.
+	 */
+	return vcpu_get_flag(vcpu, IN_NESTED_ERET);
+}
+
 int vgic_v4_put(struct kvm_vcpu *vcpu)
 {
 	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
 
-	if (!vgic_supports_direct_msis(vcpu->kvm) || !vpe->resident)
+	if (!vgic_supports_direct_irqs(vcpu->kvm) || !vpe->resident)
 		return 0;
 
-	return its_make_vpe_non_resident(vpe, !!vcpu_get_flag(vcpu, IN_WFI));
+	return its_make_vpe_non_resident(vpe, vgic_v4_want_doorbell(vcpu));
 }
 
 int vgic_v4_load(struct kvm_vcpu *vcpu)
@@ -351,7 +370,7 @@ int vgic_v4_load(struct kvm_vcpu *vcpu)
 	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
 	int err;
 
-	if (!vgic_supports_direct_msis(vcpu->kvm) || vpe->resident)
+	if (!vgic_supports_direct_irqs(vcpu->kvm) || vpe->resident)
 		return 0;
 
 	if (vcpu_get_flag(vcpu, IN_WFI))
@@ -415,7 +434,7 @@ int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq,
 	struct vgic_irq *irq;
 	struct its_vlpi_map map;
 	unsigned long flags;
-	int ret;
+	int ret = 0;
 
 	if (!vgic_supports_direct_msis(kvm))
 		return 0;
@@ -428,17 +447,24 @@ int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq,
 	if (IS_ERR(its))
 		return 0;
 
-	mutex_lock(&its->its_lock);
+	guard(mutex)(&its->its_lock);
 
-	/* Perform the actual DevID/EventID -> LPI translation. */
-	ret = vgic_its_resolve_lpi(kvm, its, irq_entry->msi.devid,
-				   irq_entry->msi.data, &irq);
-	if (ret)
-		goto out;
+	/*
+	 * Perform the actual DevID/EventID -> LPI translation.
+	 *
+	 * Silently exit if translation fails as the guest (or userspace!) has
+	 * managed to do something stupid. Emulated LPI injection will still
+	 * work if the guest figures itself out at a later time.
+	 */
+	if (vgic_its_resolve_lpi(kvm, its, irq_entry->msi.devid,
+				 irq_entry->msi.data, &irq))
+		return 0;
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
 
 	/* Silently exit if the vLPI is already mapped */
 	if (irq->hw)
-		goto out;
+		goto out_unlock_irq;
 
 	/*
 	 * Emit the mapping request. If it fails, the ITS probably
@@ -458,68 +484,72 @@ int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq,
 
 	ret = its_map_vlpi(virq, &map);
 	if (ret)
-		goto out;
+		goto out_unlock_irq;
 
 	irq->hw		= true;
 	irq->host_irq	= virq;
 	atomic_inc(&map.vpe->vlpi_count);
 
 	/* Transfer pending state */
-	raw_spin_lock_irqsave(&irq->irq_lock, flags);
-	if (irq->pending_latch) {
-		ret = irq_set_irqchip_state(irq->host_irq,
-					    IRQCHIP_STATE_PENDING,
-					    irq->pending_latch);
-		WARN_RATELIMIT(ret, "IRQ %d", irq->host_irq);
+	if (!irq->pending_latch)
+		goto out_unlock_irq;
 
-		/*
-		 * Clear pending_latch and communicate this state
-		 * change via vgic_queue_irq_unlock.
-		 */
-		irq->pending_latch = false;
-		vgic_queue_irq_unlock(kvm, irq, flags);
-	} else {
-		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-	}
+	ret = irq_set_irqchip_state(irq->host_irq, IRQCHIP_STATE_PENDING,
+				    irq->pending_latch);
+	WARN_RATELIMIT(ret, "IRQ %d", irq->host_irq);
+
+	/*
+	 * Clear pending_latch and communicate this state
+	 * change via vgic_queue_irq_unlock.
+	 */
+	irq->pending_latch = false;
+	vgic_queue_irq_unlock(kvm, irq, flags);
+	return ret;
 
-out:
-	mutex_unlock(&its->its_lock);
+out_unlock_irq:
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
 	return ret;
 }
 
-int kvm_vgic_v4_unset_forwarding(struct kvm *kvm, int virq,
-				 struct kvm_kernel_irq_routing_entry *irq_entry)
+static struct vgic_irq *__vgic_host_irq_get_vlpi(struct kvm *kvm, int host_irq)
 {
-	struct vgic_its *its;
 	struct vgic_irq *irq;
-	int ret;
+	unsigned long idx;
 
-	if (!vgic_supports_direct_msis(kvm))
-		return 0;
+	guard(rcu)();
+	xa_for_each(&kvm->arch.vgic.lpi_xa, idx, irq) {
+		if (!irq->hw || irq->host_irq != host_irq)
+			continue;
 
-	/*
-	 * Get the ITS, and escape early on error (not a valid
-	 * doorbell for any of our vITSs).
-	 */
-	its = vgic_get_its(kvm, irq_entry);
-	if (IS_ERR(its))
-		return 0;
+		if (!vgic_try_get_irq_ref(irq))
+			return NULL;
 
-	mutex_lock(&its->its_lock);
+		return irq;
+	}
 
-	ret = vgic_its_resolve_lpi(kvm, its, irq_entry->msi.devid,
-				   irq_entry->msi.data, &irq);
-	if (ret)
-		goto out;
+	return NULL;
+}
+
+void kvm_vgic_v4_unset_forwarding(struct kvm *kvm, int host_irq)
+{
+	struct vgic_irq *irq;
+	unsigned long flags;
+
+	if (!vgic_supports_direct_msis(kvm))
+		return;
+
+	irq = __vgic_host_irq_get_vlpi(kvm, host_irq);
+	if (!irq)
+		return;
 
-	WARN_ON(!(irq->hw && irq->host_irq == virq));
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	WARN_ON(irq->hw && irq->host_irq != host_irq);
 	if (irq->hw) {
 		atomic_dec(&irq->target_vcpu->arch.vgic_cpu.vgic_v3.its_vpe.vlpi_count);
 		irq->hw = false;
-		ret = its_unmap_vlpi(virq);
+		its_unmap_vlpi(host_irq);
 	}
 
-out:
-	mutex_unlock(&its->its_lock);
-	return ret;
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	vgic_put_irq(kvm, irq);
 }
diff --git a/arch/arm64/kvm/vgic/vgic-v5.c b/arch/arm64/kvm/vgic/vgic-v5.c
new file mode 100644
index 000000000000..2d3811f4e117
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-v5.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <kvm/arm_vgic.h>
+#include <linux/irqchip/arm-vgic-info.h>
+
+#include "vgic.h"
+
+/*
+ * Probe for a vGICv5 compatible interrupt controller, returning 0 on success.
+ * Currently only supports GICv3-based VMs on a GICv5 host, and hence only
+ * registers a VGIC_V3 device.
+ */
+int vgic_v5_probe(const struct gic_kvm_info *info)
+{
+	u64 ich_vtr_el2;
+	int ret;
+
+	if (!cpus_have_final_cap(ARM64_HAS_GICV5_LEGACY))
+		return -ENODEV;
+
+	kvm_vgic_global_state.type = VGIC_V5;
+	kvm_vgic_global_state.has_gcie_v3_compat = true;
+
+	/* We only support v3 compat mode - use vGICv3 limits */
+	kvm_vgic_global_state.max_gic_vcpus = VGIC_V3_MAX_CPUS;
+
+	kvm_vgic_global_state.vcpu_base = 0;
+	kvm_vgic_global_state.vctrl_base = NULL;
+	kvm_vgic_global_state.can_emulate_gicv2 = false;
+	kvm_vgic_global_state.has_gicv4 = false;
+	kvm_vgic_global_state.has_gicv4_1 = false;
+
+	ich_vtr_el2 =  kvm_call_hyp_ret(__vgic_v3_get_gic_config);
+	kvm_vgic_global_state.ich_vtr_el2 = (u32)ich_vtr_el2;
+
+	/*
+	 * The ListRegs field is 5 bits, but there is an architectural
+	 * maximum of 16 list registers. Just ignore bit 4...
+	 */
+	kvm_vgic_global_state.nr_lr = (ich_vtr_el2 & 0xf) + 1;
+
+	ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V3);
+	if (ret) {
+		kvm_err("Cannot register GICv3-legacy KVM device.\n");
+		return ret;
+	}
+
+	static_branch_enable(&kvm_vgic_global_state.gicv3_cpuif);
+	kvm_info("GCIE legacy system register CPU interface\n");
+
+	return 0;
+}
diff --git a/arch/arm64/kvm/vgic/vgic.c b/arch/arm64/kvm/vgic/vgic.c
index cc8c6b9b5dd8..430aa98888fd 100644
--- a/arch/arm64/kvm/vgic/vgic.c
+++ b/arch/arm64/kvm/vgic/vgic.c
@@ -28,8 +28,8 @@ struct vgic_global kvm_vgic_global_state __ro_after_init = {
  *     kvm->arch.config_lock (mutex)
  *       its->cmd_lock (mutex)
  *         its->its_lock (mutex)
- *           vgic_cpu->ap_list_lock		must be taken with IRQs disabled
- *             vgic_dist->lpi_xa.xa_lock	must be taken with IRQs disabled
+ *           vgic_dist->lpi_xa.xa_lock		must be taken with IRQs disabled
+ *             vgic_cpu->ap_list_lock		must be taken with IRQs disabled
  *               vgic_irq->irq_lock		must be taken with IRQs disabled
  *
  * As the ap_list_lock might be taken from the timer interrupt handler,
@@ -71,7 +71,7 @@ static struct vgic_irq *vgic_get_lpi(struct kvm *kvm, u32 intid)
 	rcu_read_lock();
 
 	irq = xa_load(&dist->lpi_xa, intid);
-	if (!vgic_try_get_irq_kref(irq))
+	if (!vgic_try_get_irq_ref(irq))
 		irq = NULL;
 
 	rcu_read_unlock();
@@ -114,13 +114,28 @@ struct vgic_irq *vgic_get_vcpu_irq(struct kvm_vcpu *vcpu, u32 intid)
 	return vgic_get_irq(vcpu->kvm, intid);
 }
 
-/*
- * We can't do anything in here, because we lack the kvm pointer to
- * lock and remove the item from the lpi_list. So we keep this function
- * empty and use the return value of kref_put() to trigger the freeing.
- */
-static void vgic_irq_release(struct kref *ref)
+static void vgic_release_lpi_locked(struct vgic_dist *dist, struct vgic_irq *irq)
+{
+	lockdep_assert_held(&dist->lpi_xa.xa_lock);
+	__xa_erase(&dist->lpi_xa, irq->intid);
+	kfree_rcu(irq, rcu);
+}
+
+static __must_check bool __vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq)
+{
+	if (irq->intid < VGIC_MIN_LPI)
+		return false;
+
+	return refcount_dec_and_test(&irq->refcount);
+}
+
+static __must_check bool vgic_put_irq_norelease(struct kvm *kvm, struct vgic_irq *irq)
 {
+	if (!__vgic_put_irq(kvm, irq))
+		return false;
+
+	irq->pending_release = true;
+	return true;
 }
 
 void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq)
@@ -128,23 +143,44 @@ void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq)
 	struct vgic_dist *dist = &kvm->arch.vgic;
 	unsigned long flags;
 
-	if (irq->intid < VGIC_MIN_LPI)
-		return;
+	/*
+	 * Normally the lock is only taken when the refcount drops to 0.
+	 * Acquire/release it early on lockdep kernels to make locking issues
+	 * in rare release paths a bit more obvious.
+	 */
+	if (IS_ENABLED(CONFIG_LOCKDEP) && irq->intid >= VGIC_MIN_LPI) {
+		guard(spinlock_irqsave)(&dist->lpi_xa.xa_lock);
+	}
 
-	if (!kref_put(&irq->refcount, vgic_irq_release))
+	if (!__vgic_put_irq(kvm, irq))
 		return;
 
 	xa_lock_irqsave(&dist->lpi_xa, flags);
-	__xa_erase(&dist->lpi_xa, irq->intid);
+	vgic_release_lpi_locked(dist, irq);
 	xa_unlock_irqrestore(&dist->lpi_xa, flags);
+}
 
-	kfree_rcu(irq, rcu);
+static void vgic_release_deleted_lpis(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	unsigned long flags, intid;
+	struct vgic_irq *irq;
+
+	xa_lock_irqsave(&dist->lpi_xa, flags);
+
+	xa_for_each(&dist->lpi_xa, intid, irq) {
+		if (irq->pending_release)
+			vgic_release_lpi_locked(dist, irq);
+	}
+
+	xa_unlock_irqrestore(&dist->lpi_xa, flags);
 }
 
 void vgic_flush_pending_lpis(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	struct vgic_irq *irq, *tmp;
+	bool deleted = false;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&vgic_cpu->ap_list_lock, flags);
@@ -155,11 +191,14 @@ void vgic_flush_pending_lpis(struct kvm_vcpu *vcpu)
 			list_del(&irq->ap_list);
 			irq->vcpu = NULL;
 			raw_spin_unlock(&irq->irq_lock);
-			vgic_put_irq(vcpu->kvm, irq);
+			deleted |= vgic_put_irq_norelease(vcpu->kvm, irq);
 		}
 	}
 
 	raw_spin_unlock_irqrestore(&vgic_cpu->ap_list_lock, flags);
+
+	if (deleted)
+		vgic_release_deleted_lpis(vcpu->kvm);
 }
 
 void vgic_irq_set_phys_pending(struct vgic_irq *irq, bool pending)
@@ -205,7 +244,7 @@ void vgic_irq_set_phys_active(struct vgic_irq *irq, bool active)
  *
  * Requires the IRQ lock to be held.
  */
-static struct kvm_vcpu *vgic_target_oracle(struct vgic_irq *irq)
+struct kvm_vcpu *vgic_target_oracle(struct vgic_irq *irq)
 {
 	lockdep_assert_held(&irq->irq_lock);
 
@@ -233,17 +272,20 @@ static struct kvm_vcpu *vgic_target_oracle(struct vgic_irq *irq)
 	return NULL;
 }
 
+struct vgic_sort_info {
+	struct kvm_vcpu *vcpu;
+	struct vgic_vmcr vmcr;
+};
+
 /*
  * The order of items in the ap_lists defines how we'll pack things in LRs as
  * well, the first items in the list being the first things populated in the
  * LRs.
  *
- * A hard rule is that active interrupts can never be pushed out of the LRs
- * (and therefore take priority) since we cannot reliably trap on deactivation
- * of IRQs and therefore they have to be present in the LRs.
- *
+ * Pending, non-active interrupts must be placed at the head of the list.
  * Otherwise things should be sorted by the priority field and the GIC
  * hardware support will take care of preemption of priority groups etc.
+ * Interrupts that are not deliverable should be at the end of the list.
  *
  * Return negative if "a" sorts before "b", 0 to preserve order, and positive
  * to sort "b" before "a".
@@ -253,6 +295,8 @@ static int vgic_irq_cmp(void *priv, const struct list_head *a,
 {
 	struct vgic_irq *irqa = container_of(a, struct vgic_irq, ap_list);
 	struct vgic_irq *irqb = container_of(b, struct vgic_irq, ap_list);
+	struct vgic_sort_info *info = priv;
+	struct kvm_vcpu *vcpu = info->vcpu;
 	bool penda, pendb;
 	int ret;
 
@@ -266,21 +310,32 @@ static int vgic_irq_cmp(void *priv, const struct list_head *a,
 	raw_spin_lock(&irqa->irq_lock);
 	raw_spin_lock_nested(&irqb->irq_lock, SINGLE_DEPTH_NESTING);
 
-	if (irqa->active || irqb->active) {
-		ret = (int)irqb->active - (int)irqa->active;
+	/* Undeliverable interrupts should be last */
+	ret = (int)(vgic_target_oracle(irqb) == vcpu) - (int)(vgic_target_oracle(irqa) == vcpu);
+	if (ret)
+		goto out;
+
+	/* Same thing for interrupts targeting a disabled group */
+	ret =  (int)(irqb->group ? info->vmcr.grpen1 : info->vmcr.grpen0);
+	ret -= (int)(irqa->group ? info->vmcr.grpen1 : info->vmcr.grpen0);
+	if (ret)
 		goto out;
-	}
 
-	penda = irqa->enabled && irq_is_pending(irqa);
-	pendb = irqb->enabled && irq_is_pending(irqb);
+	penda = irqa->enabled && irq_is_pending(irqa) && !irqa->active;
+	pendb = irqb->enabled && irq_is_pending(irqb) && !irqb->active;
 
-	if (!penda || !pendb) {
-		ret = (int)pendb - (int)penda;
+	ret = (int)pendb - (int)penda;
+	if (ret)
 		goto out;
-	}
 
-	/* Both pending and enabled, sort by priority */
-	ret = irqa->priority - irqb->priority;
+	/* Both pending and enabled, sort by priority (lower number first) */
+	ret = (int)irqa->priority - (int)irqb->priority;
+	if (ret)
+		goto out;
+
+	/* Finally, HW bit active interrupts have priority over non-HW ones */
+	ret = (int)irqb->hw - (int)irqa->hw;
+
 out:
 	raw_spin_unlock(&irqb->irq_lock);
 	raw_spin_unlock(&irqa->irq_lock);
@@ -291,10 +346,12 @@ out:
 static void vgic_sort_ap_list(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_sort_info info = { .vcpu = vcpu, };
 
 	lockdep_assert_held(&vgic_cpu->ap_list_lock);
 
-	list_sort(NULL, &vgic_cpu->ap_list_head, vgic_irq_cmp);
+	vgic_get_vmcr(vcpu, &info.vmcr);
+	list_sort(&info, &vgic_cpu->ap_list_head, vgic_irq_cmp);
 }
 
 /*
@@ -317,6 +374,20 @@ static bool vgic_validate_injection(struct vgic_irq *irq, bool level, void *owne
 	return false;
 }
 
+static bool vgic_model_needs_bcst_kick(struct kvm *kvm)
+{
+	/*
+	 * A GICv3 (or GICv3-like) system exposing a GICv3 to the guest
+	 * needs a broadcast kick to set TDIR globally.
+	 *
+	 * For systems that do not have TDIR (ARM's own v8.0 CPUs), the
+	 * shadow TDIR bit is always set, and so is the register's TC bit,
+	 * so no need to kick the CPUs.
+	 */
+	return (cpus_have_final_cap(ARM64_HAS_ICH_HCR_EL2_TDIR) &&
+		kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3);
+}
+
 /*
  * Check whether an IRQ needs to (and can) be queued to a VCPU's ap list.
  * Do the queuing if necessary, taking the right locks in the right order.
@@ -329,6 +400,7 @@ bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq,
 			   unsigned long flags) __releases(&irq->irq_lock)
 {
 	struct kvm_vcpu *vcpu;
+	bool bcast;
 
 	lockdep_assert_held(&irq->irq_lock);
 
@@ -399,15 +471,24 @@ retry:
 	 * now in the ap_list. This is safe as the caller must already hold a
 	 * reference on the irq.
 	 */
-	vgic_get_irq_kref(irq);
+	vgic_get_irq_ref(irq);
 	list_add_tail(&irq->ap_list, &vcpu->arch.vgic_cpu.ap_list_head);
 	irq->vcpu = vcpu;
 
+	/* A new SPI may result in deactivation trapping on all vcpus */
+	bcast = (vgic_model_needs_bcst_kick(vcpu->kvm) &&
+		 vgic_valid_spi(vcpu->kvm, irq->intid) &&
+		 atomic_fetch_inc(&vcpu->kvm->arch.vgic.active_spis) == 0);
+
 	raw_spin_unlock(&irq->irq_lock);
 	raw_spin_unlock_irqrestore(&vcpu->arch.vgic_cpu.ap_list_lock, flags);
 
-	kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
-	kvm_vcpu_kick(vcpu);
+	if (!bcast) {
+		kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
+		kvm_vcpu_kick(vcpu);
+	} else {
+		kvm_make_all_cpus_request(vcpu->kvm, KVM_REQ_IRQ_PENDING);
+	}
 
 	return true;
 }
@@ -630,6 +711,7 @@ static void vgic_prune_ap_list(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	struct vgic_irq *irq, *tmp;
+	bool deleted_lpis = false;
 
 	DEBUG_SPINLOCK_BUG_ON(!irqs_disabled());
 
@@ -657,12 +739,12 @@ retry:
 
 			/*
 			 * This vgic_put_irq call matches the
-			 * vgic_get_irq_kref in vgic_queue_irq_unlock,
+			 * vgic_get_irq_ref in vgic_queue_irq_unlock,
 			 * where we added the LPI to the ap_list. As
 			 * we remove the irq from the list, we drop
 			 * also drop the refcount.
 			 */
-			vgic_put_irq(vcpu->kvm, irq);
+			deleted_lpis |= vgic_put_irq_norelease(vcpu->kvm, irq);
 			continue;
 		}
 
@@ -725,6 +807,9 @@ retry:
 	}
 
 	raw_spin_unlock(&vgic_cpu->ap_list_lock);
+
+	if (unlikely(deleted_lpis))
+		vgic_release_deleted_lpis(vcpu->kvm);
 }
 
 static inline void vgic_fold_lr_state(struct kvm_vcpu *vcpu)
@@ -755,98 +840,148 @@ static inline void vgic_clear_lr(struct kvm_vcpu *vcpu, int lr)
 		vgic_v3_clear_lr(vcpu, lr);
 }
 
-static inline void vgic_set_underflow(struct kvm_vcpu *vcpu)
-{
-	if (kvm_vgic_global_state.type == VGIC_V2)
-		vgic_v2_set_underflow(vcpu);
-	else
-		vgic_v3_set_underflow(vcpu);
-}
-
-/* Requires the ap_list_lock to be held. */
-static int compute_ap_list_depth(struct kvm_vcpu *vcpu,
-				 bool *multi_sgi)
+static void summarize_ap_list(struct kvm_vcpu *vcpu,
+			      struct ap_list_summary *als)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	struct vgic_irq *irq;
-	int count = 0;
-
-	*multi_sgi = false;
 
 	lockdep_assert_held(&vgic_cpu->ap_list_lock);
 
+	*als = (typeof(*als)){};
+
 	list_for_each_entry(irq, &vgic_cpu->ap_list_head, ap_list) {
-		int w;
+		guard(raw_spinlock)(&irq->irq_lock);
 
-		raw_spin_lock(&irq->irq_lock);
-		/* GICv2 SGIs can count for more than one... */
-		w = vgic_irq_get_lr_count(irq);
-		raw_spin_unlock(&irq->irq_lock);
+		if (unlikely(vgic_target_oracle(irq) != vcpu))
+			continue;
 
-		count += w;
-		*multi_sgi |= (w > 1);
+		if (!irq->active)
+			als->nr_pend++;
+		else
+			als->nr_act++;
+
+		if (irq->intid < VGIC_NR_SGIS)
+			als->nr_sgi++;
 	}
-	return count;
 }
 
-/* Requires the VCPU's ap_list_lock to be held. */
+/*
+ * Dealing with LR overflow is close to black magic -- dress accordingly.
+ *
+ * We have to present an almost infinite number of interrupts through a very
+ * limited number of registers. Therefore crucial decisions must be made to
+ * ensure we feed the most relevant interrupts into the LRs, and yet have
+ * some facilities to let the guest interact with those that are not there.
+ *
+ * All considerations below are in the context of interrupts targeting a
+ * single vcpu with non-idle state (either pending, active, or both),
+ * colloquially called the ap_list:
+ *
+ * - Pending interrupts must have priority over active interrupts. This also
+ *   excludes pending+active interrupts. This ensures that a guest can
+ *   perform priority drops on any number of interrupts, and yet be
+ *   presented the next pending one.
+ *
+ * - Deactivation of interrupts outside of the LRs must be tracked by using
+ *   either the EOIcount-driven maintenance interrupt, and sometimes by
+ *   trapping the DIR register.
+ *
+ * - For EOImode=0, a non-zero EOIcount means walking the ap_list past the
+ *   point that made it into the LRs, and deactivate interrupts that would
+ *   have made it onto the LRs if we had the space.
+ *
+ * - The MI-generation bits must be used to try and force an exit when the
+ *   guest has done enough changes to the LRs that we want to reevaluate the
+ *   situation:
+ *
+ *	- if the total number of pending interrupts exceeds the number of
+ *	  LR, NPIE must be set in order to exit once no pending interrupts
+ *	  are present in the LRs, allowing us to populate the next batch.
+ *
+ *	- if there are active interrupts outside of the LRs, then LRENPIE
+ *	  must be set so that we exit on deactivation of one of these, and
+ *	  work out which one is to be deactivated.  Note that this is not
+ *	  enough to deal with EOImode=1, see below.
+ *
+ *	- if the overall number of interrupts exceeds the number of LRs,
+ *	  then UIE must be set to allow refilling of the LRs once the
+ *	  majority of them has been processed.
+ *
+ *	- as usual, MI triggers are only an optimisation, since we cannot
+ *        rely on the MI being delivered in timely manner...
+ *
+ * - EOImode=1 creates some additional problems:
+ *
+ *      - deactivation can happen in any order, and we cannot rely on
+ *	  EOImode=0's coupling of priority-drop and deactivation which
+ *	  imposes strict reverse Ack order. This means that DIR must
+ *	  trap if we have active interrupts outside of the LRs.
+ *
+ *      - deactivation of SPIs can occur on any CPU, while the SPI is only
+ *	  present in the ap_list of the CPU that actually ack-ed it. In that
+ *	  case, EOIcount doesn't provide enough information, and we must
+ *	  resort to trapping DIR even if we don't overflow the LRs. Bonus
+ *	  point for not trapping DIR when no SPIs are pending or active in
+ *	  the whole VM.
+ *
+ *	- LPIs do not suffer the same problem as SPIs on deactivation, as we
+ *	  have to essentially discard the active state, see below.
+ *
+ * - Virtual LPIs have an active state (surprise!), which gets removed on
+ *   priority drop (EOI). However, EOIcount doesn't get bumped when the LPI
+ *   is not present in the LR (surprise again!). Special care must therefore
+ *   be taken to remove the active state from any activated LPI when exiting
+ *   from the guest. This is in a way no different from what happens on the
+ *   physical side. We still rely on the running priority to have been
+ *   removed from the APRs, irrespective of the LPI being present in the LRs
+ *   or not.
+ *
+ * - Virtual SGIs directly injected via GICv4.1 must not affect EOIcount, as
+ *   they are not managed in SW and don't have a true active state. So only
+ *   set vSGIEOICount when no SGIs are in the ap_list.
+ *
+ * - GICv2 SGIs with multiple sources are injected one source at a time, as
+ *   if they were made pending sequentially. This may mean that we don't
+ *   always present the HPPI if other interrupts with lower priority are
+ *   pending in the LRs. Big deal.
+ */
 static void vgic_flush_lr_state(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct ap_list_summary als;
 	struct vgic_irq *irq;
-	int count;
-	bool multi_sgi;
-	u8 prio = 0xff;
-	int i = 0;
+	int count = 0;
 
 	lockdep_assert_held(&vgic_cpu->ap_list_lock);
 
-	count = compute_ap_list_depth(vcpu, &multi_sgi);
-	if (count > kvm_vgic_global_state.nr_lr || multi_sgi)
-		vgic_sort_ap_list(vcpu);
+	summarize_ap_list(vcpu, &als);
 
-	count = 0;
+	if (irqs_outside_lrs(&als))
+		vgic_sort_ap_list(vcpu);
 
 	list_for_each_entry(irq, &vgic_cpu->ap_list_head, ap_list) {
-		raw_spin_lock(&irq->irq_lock);
-
-		/*
-		 * If we have multi-SGIs in the pipeline, we need to
-		 * guarantee that they are all seen before any IRQ of
-		 * lower priority. In that case, we need to filter out
-		 * these interrupts by exiting early. This is easy as
-		 * the AP list has been sorted already.
-		 */
-		if (multi_sgi && irq->priority > prio) {
-			_raw_spin_unlock(&irq->irq_lock);
-			break;
-		}
-
-		if (likely(vgic_target_oracle(irq) == vcpu)) {
-			vgic_populate_lr(vcpu, irq, count++);
-
-			if (irq->source)
-				prio = irq->priority;
+		scoped_guard(raw_spinlock,  &irq->irq_lock) {
+			if (likely(vgic_target_oracle(irq) == vcpu)) {
+				vgic_populate_lr(vcpu, irq, count++);
+			}
 		}
 
-		raw_spin_unlock(&irq->irq_lock);
-
-		if (count == kvm_vgic_global_state.nr_lr) {
-			if (!list_is_last(&irq->ap_list,
-					  &vgic_cpu->ap_list_head))
-				vgic_set_underflow(vcpu);
+		if (count == kvm_vgic_global_state.nr_lr)
 			break;
-		}
 	}
 
 	/* Nuke remaining LRs */
-	for (i = count ; i < kvm_vgic_global_state.nr_lr; i++)
+	for (int i = count ; i < kvm_vgic_global_state.nr_lr; i++)
 		vgic_clear_lr(vcpu, i);
 
-	if (!static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif))
+	if (!static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif)) {
 		vcpu->arch.vgic_cpu.vgic_v2.used_lrs = count;
-	else
+		vgic_v2_configure_hcr(vcpu, &als);
+	} else {
 		vcpu->arch.vgic_cpu.vgic_v3.used_lrs = count;
+		vgic_v3_configure_hcr(vcpu, &als);
+	}
 }
 
 static inline bool can_access_vgic_from_kernel(void)
@@ -870,23 +1005,31 @@ static inline void vgic_save_state(struct kvm_vcpu *vcpu)
 /* Sync back the hardware VGIC state into our emulation after a guest's run. */
 void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
-	int used_lrs;
-
-	/* An empty ap_list_head implies used_lrs == 0 */
-	if (list_empty(&vcpu->arch.vgic_cpu.ap_list_head))
+	/* If nesting, emulate the HW effect from L0 to L1 */
+	if (vgic_state_is_nested(vcpu)) {
+		vgic_v3_sync_nested(vcpu);
 		return;
+	}
+
+	if (vcpu_has_nv(vcpu))
+		vgic_v3_nested_update_mi(vcpu);
 
 	if (can_access_vgic_from_kernel())
 		vgic_save_state(vcpu);
 
-	if (!static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif))
-		used_lrs = vcpu->arch.vgic_cpu.vgic_v2.used_lrs;
-	else
-		used_lrs = vcpu->arch.vgic_cpu.vgic_v3.used_lrs;
+	vgic_fold_lr_state(vcpu);
+	vgic_prune_ap_list(vcpu);
+}
+
+/* Sync interrupts that were deactivated through a DIR trap */
+void kvm_vgic_process_async_update(struct kvm_vcpu *vcpu)
+{
+	unsigned long flags;
 
-	if (used_lrs)
-		vgic_fold_lr_state(vcpu);
+	/* Make sure we're in the same context as LR handling */
+	local_irq_save(flags);
 	vgic_prune_ap_list(vcpu);
+	local_irq_restore(flags);
 }
 
 static inline void vgic_restore_state(struct kvm_vcpu *vcpu)
@@ -901,33 +1044,45 @@ static inline void vgic_restore_state(struct kvm_vcpu *vcpu)
 void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
 {
 	/*
-	 * If there are no virtual interrupts active or pending for this
-	 * VCPU, then there is no work to do and we can bail out without
-	 * taking any lock.  There is a potential race with someone injecting
-	 * interrupts to the VCPU, but it is a benign race as the VCPU will
-	 * either observe the new interrupt before or after doing this check,
-	 * and introducing additional synchronization mechanism doesn't change
-	 * this.
+	 * If in a nested state, we must return early. Two possibilities:
 	 *
-	 * Note that we still need to go through the whole thing if anything
-	 * can be directly injected (GICv4).
+	 * - If we have any pending IRQ for the guest and the guest
+	 *   expects IRQs to be handled in its virtual EL2 mode (the
+	 *   virtual IMO bit is set) and it is not already running in
+	 *   virtual EL2 mode, then we have to emulate an IRQ
+	 *   exception to virtual EL2.
+	 *
+	 *   We do that by placing a request to ourselves which will
+	 *   abort the entry procedure and inject the exception at the
+	 *   beginning of the run loop.
+	 *
+	 * - Otherwise, do exactly *NOTHING* apart from enabling the virtual
+	 *   CPU interface. The guest state is already loaded, and we can
+	 *   carry on with running it.
+	 *
+	 * If we have NV, but are not in a nested state, compute the
+	 * maintenance interrupt state, as it may fire.
 	 */
-	if (list_empty(&vcpu->arch.vgic_cpu.ap_list_head) &&
-	    !vgic_supports_direct_msis(vcpu->kvm))
+	if (vgic_state_is_nested(vcpu)) {
+		if (kvm_vgic_vcpu_pending_irq(vcpu))
+			kvm_make_request(KVM_REQ_GUEST_HYP_IRQ_PENDING, vcpu);
+
+		vgic_v3_flush_nested(vcpu);
 		return;
+	}
+
+	if (vcpu_has_nv(vcpu))
+		vgic_v3_nested_update_mi(vcpu);
 
 	DEBUG_SPINLOCK_BUG_ON(!irqs_disabled());
 
-	if (!list_empty(&vcpu->arch.vgic_cpu.ap_list_head)) {
-		raw_spin_lock(&vcpu->arch.vgic_cpu.ap_list_lock);
+	scoped_guard(raw_spinlock, &vcpu->arch.vgic_cpu.ap_list_lock)
 		vgic_flush_lr_state(vcpu);
-		raw_spin_unlock(&vcpu->arch.vgic_cpu.ap_list_lock);
-	}
 
 	if (can_access_vgic_from_kernel())
 		vgic_restore_state(vcpu);
 
-	if (vgic_supports_direct_msis(vcpu->kvm))
+	if (vgic_supports_direct_irqs(vcpu->kvm))
 		vgic_v4_commit(vcpu);
 }
 
diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h
index 122d95b4e284..5f0fc96b4dc2 100644
--- a/arch/arm64/kvm/vgic/vgic.h
+++ b/arch/arm64/kvm/vgic/vgic.h
@@ -64,6 +64,24 @@
 				      KVM_REG_ARM_VGIC_SYSREG_CRM_MASK | \
 				      KVM_REG_ARM_VGIC_SYSREG_OP2_MASK)
 
+#define KVM_ICC_SRE_EL2		(ICC_SRE_EL2_ENABLE | ICC_SRE_EL2_SRE |	\
+				 ICC_SRE_EL1_DIB | ICC_SRE_EL1_DFB)
+#define KVM_ICH_VTR_EL2_RES0	(ICH_VTR_EL2_DVIM 	|	\
+				 ICH_VTR_EL2_A3V	|	\
+				 ICH_VTR_EL2_IDbits)
+#define KVM_ICH_VTR_EL2_RES1	ICH_VTR_EL2_nV4
+
+static inline u64 kvm_get_guest_vtr_el2(void)
+{
+	u64 vtr;
+
+	vtr  = kvm_vgic_global_state.ich_vtr_el2;
+	vtr &= ~KVM_ICH_VTR_EL2_RES0;
+	vtr |= KVM_ICH_VTR_EL2_RES1;
+
+	return vtr;
+}
+
 /*
  * As per Documentation/virt/kvm/devices/arm-vgic-its.rst,
  * below macros are defined for ITS table entry encoding.
@@ -146,6 +164,22 @@ static inline int vgic_write_guest_lock(struct kvm *kvm, gpa_t gpa,
 	return ret;
 }
 
+void kvm_compute_ich_hcr_trap_bits(struct alt_instr *alt,
+				   __le32 *origptr, __le32 *updptr, int nr_inst);
+
+static inline u64 vgic_ich_hcr_trap_bits(void)
+{
+	u64 hcr;
+
+	/* All the traps are in the bottom 16bits */
+	asm volatile(ALTERNATIVE_CB("movz %0, #0\n",
+				    ARM64_ALWAYS_SYSTEM,
+				    kvm_compute_ich_hcr_trap_bits)
+		     : "=r" (hcr));
+
+	return hcr;
+}
+
 /*
  * This struct provides an intermediate representation of the fields contained
  * in the GICH_VMCR and ICH_VMCR registers, such that code exporting the GIC
@@ -172,6 +206,51 @@ struct vgic_reg_attr {
 	gpa_t addr;
 };
 
+struct its_device {
+	struct list_head dev_list;
+
+	/* the head for the list of ITTEs */
+	struct list_head itt_head;
+	u32 num_eventid_bits;
+	gpa_t itt_addr;
+	u32 device_id;
+};
+
+#define COLLECTION_NOT_MAPPED ((u32)~0)
+
+struct its_collection {
+	struct list_head coll_list;
+
+	u32 collection_id;
+	u32 target_addr;
+};
+
+#define its_is_collection_mapped(coll) ((coll) && \
+				((coll)->target_addr != COLLECTION_NOT_MAPPED))
+
+struct its_ite {
+	struct list_head ite_list;
+
+	struct vgic_irq *irq;
+	struct its_collection *collection;
+	u32 event_id;
+};
+
+struct ap_list_summary {
+	unsigned int	nr_pend;	/* purely pending, not active */
+	unsigned int	nr_act;		/* active, or active+pending */
+	unsigned int	nr_sgi;		/* any SGI */
+};
+
+#define irqs_outside_lrs(s)						\
+	 (((s)->nr_pend + (s)->nr_act) > kvm_vgic_global_state.nr_lr)
+
+#define irqs_pending_outside_lrs(s)			\
+	((s)->nr_pend > kvm_vgic_global_state.nr_lr)
+
+#define irqs_active_outside_lrs(s)		\
+	((s)->nr_act &&	irqs_outside_lrs(s))
+
 int vgic_v3_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
 		       struct vgic_reg_attr *reg_attr);
 int vgic_v2_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
@@ -182,6 +261,7 @@ vgic_get_mmio_region(struct kvm_vcpu *vcpu, struct vgic_io_device *iodev,
 struct vgic_irq *vgic_get_irq(struct kvm *kvm, u32 intid);
 struct vgic_irq *vgic_get_vcpu_irq(struct kvm_vcpu *vcpu, u32 intid);
 void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq);
+struct kvm_vcpu *vgic_target_oracle(struct vgic_irq *irq);
 bool vgic_get_phys_line_level(struct vgic_irq *irq);
 void vgic_irq_set_phys_pending(struct vgic_irq *irq, bool pending);
 void vgic_irq_set_phys_active(struct vgic_irq *irq, bool active);
@@ -197,8 +277,9 @@ int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr,
 
 void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu);
 void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr);
+void vgic_v2_deactivate(struct kvm_vcpu *vcpu, u32 val);
 void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr);
-void vgic_v2_set_underflow(struct kvm_vcpu *vcpu);
+void vgic_v2_configure_hcr(struct kvm_vcpu *vcpu, struct ap_list_summary *als);
 int vgic_v2_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr);
 int vgic_v2_dist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
 			 int offset, u32 *val);
@@ -206,7 +287,7 @@ int vgic_v2_cpuif_uaccess(struct kvm_vcpu *vcpu, bool is_write,
 			  int offset, u32 *val);
 void vgic_v2_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
-void vgic_v2_enable(struct kvm_vcpu *vcpu);
+void vgic_v2_reset(struct kvm_vcpu *vcpu);
 int vgic_v2_probe(const struct gic_kvm_info *info);
 int vgic_v2_map_resources(struct kvm *kvm);
 int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
@@ -219,7 +300,7 @@ void vgic_v2_put(struct kvm_vcpu *vcpu);
 void vgic_v2_save_state(struct kvm_vcpu *vcpu);
 void vgic_v2_restore_state(struct kvm_vcpu *vcpu);
 
-static inline bool vgic_try_get_irq_kref(struct vgic_irq *irq)
+static inline bool vgic_try_get_irq_ref(struct vgic_irq *irq)
 {
 	if (!irq)
 		return false;
@@ -227,21 +308,22 @@ static inline bool vgic_try_get_irq_kref(struct vgic_irq *irq)
 	if (irq->intid < VGIC_MIN_LPI)
 		return true;
 
-	return kref_get_unless_zero(&irq->refcount);
+	return refcount_inc_not_zero(&irq->refcount);
 }
 
-static inline void vgic_get_irq_kref(struct vgic_irq *irq)
+static inline void vgic_get_irq_ref(struct vgic_irq *irq)
 {
-	WARN_ON_ONCE(!vgic_try_get_irq_kref(irq));
+	WARN_ON_ONCE(!vgic_try_get_irq_ref(irq));
 }
 
 void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu);
 void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr);
 void vgic_v3_clear_lr(struct kvm_vcpu *vcpu, int lr);
-void vgic_v3_set_underflow(struct kvm_vcpu *vcpu);
+void vgic_v3_deactivate(struct kvm_vcpu *vcpu, u64 val);
+void vgic_v3_configure_hcr(struct kvm_vcpu *vcpu, struct ap_list_summary *als);
 void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
 void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
-void vgic_v3_enable(struct kvm_vcpu *vcpu);
+void vgic_v3_reset(struct kvm_vcpu *vcpu);
 int vgic_v3_probe(const struct gic_kvm_info *info);
 int vgic_v3_map_resources(struct kvm *kvm);
 int vgic_v3_lpi_sync_pending_status(struct kvm *kvm, struct vgic_irq *irq);
@@ -267,6 +349,7 @@ int vgic_v3_redist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
 int vgic_v3_cpu_sysregs_uaccess(struct kvm_vcpu *vcpu,
 				struct kvm_device_attr *attr, bool is_write);
 int vgic_v3_has_cpu_sysregs_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr);
+const struct sys_reg_desc *vgic_v3_get_sysreg_table(unsigned int *sz);
 int vgic_v3_line_level_info_uaccess(struct kvm_vcpu *vcpu, bool is_write,
 				    u32 intid, u32 *val);
 int kvm_register_vgic_device(unsigned long type);
@@ -278,6 +361,8 @@ int vgic_init(struct kvm *kvm);
 void vgic_debug_init(struct kvm *kvm);
 void vgic_debug_destroy(struct kvm *kvm);
 
+int vgic_v5_probe(const struct gic_kvm_info *info);
+
 static inline int vgic_v3_max_apr_idx(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *cpu_if = &vcpu->arch.vgic_cpu;
@@ -339,7 +424,15 @@ void vgic_its_invalidate_all_caches(struct kvm *kvm);
 int vgic_its_inv_lpi(struct kvm *kvm, struct vgic_irq *irq);
 int vgic_its_invall(struct kvm_vcpu *vcpu);
 
+bool system_supports_direct_sgis(void);
 bool vgic_supports_direct_msis(struct kvm *kvm);
+bool vgic_supports_direct_sgis(struct kvm *kvm);
+
+static inline bool vgic_supports_direct_irqs(struct kvm *kvm)
+{
+	return vgic_supports_direct_msis(kvm) || vgic_supports_direct_sgis(kvm);
+}
+
 int vgic_v4_init(struct kvm *kvm);
 void vgic_v4_teardown(struct kvm *kvm);
 void vgic_v4_configure_vsgis(struct kvm *kvm);
@@ -353,4 +446,25 @@ static inline bool kvm_has_gicv3(struct kvm *kvm)
 	return kvm_has_feat(kvm, ID_AA64PFR0_EL1, GIC, IMP);
 }
 
+void vgic_v3_flush_nested(struct kvm_vcpu *vcpu);
+void vgic_v3_sync_nested(struct kvm_vcpu *vcpu);
+void vgic_v3_load_nested(struct kvm_vcpu *vcpu);
+void vgic_v3_put_nested(struct kvm_vcpu *vcpu);
+void vgic_v3_handle_nested_maint_irq(struct kvm_vcpu *vcpu);
+void vgic_v3_nested_update_mi(struct kvm_vcpu *vcpu);
+
+static inline bool vgic_is_v3_compat(struct kvm *kvm)
+{
+	return cpus_have_final_cap(ARM64_HAS_GICV5_CPUIF) &&
+		kvm_vgic_global_state.has_gcie_v3_compat;
+}
+
+static inline bool vgic_is_v3(struct kvm *kvm)
+{
+	return kvm_vgic_global_state.type == VGIC_V3 || vgic_is_v3_compat(kvm);
+}
+
+int vgic_its_debug_init(struct kvm_device *dev);
+void vgic_its_debug_destroy(struct kvm_device *dev);
+
 #endif
diff --git a/arch/arm64/kvm/vmid.c b/arch/arm64/kvm/vmid.c
index 806223b7022a..7fe8ba1a2851 100644
--- a/arch/arm64/kvm/vmid.c
+++ b/arch/arm64/kvm/vmid.c
@@ -135,11 +135,10 @@ void kvm_arm_vmid_clear_active(void)
 	atomic64_set(this_cpu_ptr(&active_vmids), VMID_ACTIVE_INVALID);
 }
 
-bool kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid)
+void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid)
 {
 	unsigned long flags;
 	u64 vmid, old_active_vmid;
-	bool updated = false;
 
 	vmid = atomic64_read(&kvm_vmid->id);
 
@@ -157,21 +156,17 @@ bool kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid)
 	if (old_active_vmid != 0 && vmid_gen_match(vmid) &&
 	    0 != atomic64_cmpxchg_relaxed(this_cpu_ptr(&active_vmids),
 					  old_active_vmid, vmid))
-		return false;
+		return;
 
 	raw_spin_lock_irqsave(&cpu_vmid_lock, flags);
 
 	/* Check that our VMID belongs to the current generation. */
 	vmid = atomic64_read(&kvm_vmid->id);
-	if (!vmid_gen_match(vmid)) {
+	if (!vmid_gen_match(vmid))
 		vmid = new_vmid(kvm_vmid);
-		updated = true;
-	}
 
 	atomic64_set(this_cpu_ptr(&active_vmids), vmid);
 	raw_spin_unlock_irqrestore(&cpu_vmid_lock, flags);
-
-	return updated;
 }
 
 /*
diff --git a/arch/arm64/lib/.gitignore b/arch/arm64/lib/.gitignore
new file mode 100644
index 000000000000..647d7a922e68
--- /dev/null
+++ b/arch/arm64/lib/.gitignore
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# This now-removed directory used to contain generated files.
+/crypto/
diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile
index 8e882f479d98..633e5223d944 100644
--- a/arch/arm64/lib/Makefile
+++ b/arch/arm64/lib/Makefile
@@ -13,8 +13,6 @@ endif
 
 lib-$(CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE) += uaccess_flushcache.o
 
-obj-$(CONFIG_CRC32) += crc32.o crc32-glue.o
-
 obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
 
 obj-$(CONFIG_ARM64_MTE) += mte.o
diff --git a/arch/arm64/lib/clear_user.S b/arch/arm64/lib/clear_user.S
index a5a5f5b97b17..de9a303b6ad0 100644
--- a/arch/arm64/lib/clear_user.S
+++ b/arch/arm64/lib/clear_user.S
@@ -17,14 +17,27 @@
  * Alignment fixed up by hardware.
  */
 
-	.p2align 4
-	// Alignment is for the loop, but since the prologue (including BTI)
-	// is also 16 bytes we can keep any padding outside the function
 SYM_FUNC_START(__arch_clear_user)
 	add	x2, x0, x1
+
+#ifdef CONFIG_AS_HAS_MOPS
+	.arch_extension mops
+alternative_if_not ARM64_HAS_MOPS
+	b	.Lno_mops
+alternative_else_nop_endif
+
+USER(9f, setpt	[x0]!, x1!, xzr)
+USER(6f, setmt	[x0]!, x1!, xzr)
+USER(6f, setet	[x0]!, x1!, xzr)
+	mov	x0, #0
+	ret
+.Lno_mops:
+#endif
+
 	subs	x1, x1, #8
 	b.mi	2f
-1:
+
+1:	.p2align 4
 USER(9f, sttr	xzr, [x0])
 	add	x0, x0, #8
 	subs	x1, x1, #8
@@ -47,6 +60,10 @@ USER(7f, sttrb	wzr, [x2, #-1])
 	ret
 
 	// Exception fixups
+6:	b.cs	9f
+	// Registers are in Option A format
+	add	x0, x0, x1
+	b	9f
 7:	sub	x0, x2, #5	// Adjust for faulting on the final byte...
 8:	add	x0, x0, #4	// ...or the second word of the 4-7 byte case
 9:	sub	x0, x2, x0
diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S
index 34e317907524..400057d607ec 100644
--- a/arch/arm64/lib/copy_from_user.S
+++ b/arch/arm64/lib/copy_from_user.S
@@ -52,6 +52,13 @@
 	stp \reg1, \reg2, [\ptr], \val
 	.endm
 
+	.macro cpy1 dst, src, count
+	.arch_extension mops
+	USER_CPY(9997f, 0, cpyfprt [\dst]!, [\src]!, \count!)
+	USER_CPY(9996f, 0, cpyfmrt [\dst]!, [\src]!, \count!)
+	USER_CPY(9996f, 0, cpyfert [\dst]!, [\src]!, \count!)
+	.endm
+
 end	.req	x5
 srcin	.req	x15
 SYM_FUNC_START(__arch_copy_from_user)
@@ -62,6 +69,9 @@ SYM_FUNC_START(__arch_copy_from_user)
 	ret
 
 	// Exception fixups
+9996:	b.cs	9997f
+	// Registers are in Option A format
+	add	dst, dst, count
 9997:	cmp	dst, dstin
 	b.ne	9998f
 	// Before being absolutely sure we couldn't copy anything, try harder
diff --git a/arch/arm64/lib/copy_template.S b/arch/arm64/lib/copy_template.S
index 488df234c49a..7f2f5a0e2fb9 100644
--- a/arch/arm64/lib/copy_template.S
+++ b/arch/arm64/lib/copy_template.S
@@ -40,6 +40,16 @@ D_l	.req	x13
 D_h	.req	x14
 
 	mov	dst, dstin
+
+#ifdef CONFIG_AS_HAS_MOPS
+alternative_if_not ARM64_HAS_MOPS
+	b	.Lno_mops
+alternative_else_nop_endif
+	cpy1	dst, src, count
+	b	.Lexitfunc
+.Lno_mops:
+#endif
+
 	cmp	count, #16
 	/*When memory length is less than 16, the accessed are not aligned.*/
 	b.lo	.Ltiny15
diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S
index 802231772608..819f2e3fc7a9 100644
--- a/arch/arm64/lib/copy_to_user.S
+++ b/arch/arm64/lib/copy_to_user.S
@@ -51,6 +51,13 @@
 	user_stp 9997f, \reg1, \reg2, \ptr, \val
 	.endm
 
+	.macro cpy1 dst, src, count
+	.arch_extension mops
+	USER_CPY(9997f, 1, cpyfpwt [\dst]!, [\src]!, \count!)
+	USER_CPY(9996f, 1, cpyfmwt [\dst]!, [\src]!, \count!)
+	USER_CPY(9996f, 1, cpyfewt [\dst]!, [\src]!, \count!)
+	.endm
+
 end	.req	x5
 srcin	.req	x15
 SYM_FUNC_START(__arch_copy_to_user)
@@ -61,6 +68,9 @@ SYM_FUNC_START(__arch_copy_to_user)
 	ret
 
 	// Exception fixups
+9996:	b.cs	9997f
+	// Registers are in Option A format
+	add	dst, dst, count
 9997:	cmp	dst, dstin
 	b.ne	9998f
 	// Before being absolutely sure we couldn't copy anything, try harder
diff --git a/arch/arm64/lib/crc32-glue.c b/arch/arm64/lib/crc32-glue.c
deleted file mode 100644
index 295ae3e6b997..000000000000
--- a/arch/arm64/lib/crc32-glue.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/crc32.h>
-#include <linux/linkage.h>
-
-#include <asm/alternative.h>
-#include <asm/cpufeature.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-
-#include <crypto/internal/simd.h>
-
-// The minimum input length to consider the 4-way interleaved code path
-static const size_t min_len = 1024;
-
-asmlinkage u32 crc32_le_arm64(u32 crc, unsigned char const *p, size_t len);
-asmlinkage u32 crc32c_le_arm64(u32 crc, unsigned char const *p, size_t len);
-asmlinkage u32 crc32_be_arm64(u32 crc, unsigned char const *p, size_t len);
-
-asmlinkage u32 crc32_le_arm64_4way(u32 crc, unsigned char const *p, size_t len);
-asmlinkage u32 crc32c_le_arm64_4way(u32 crc, unsigned char const *p, size_t len);
-asmlinkage u32 crc32_be_arm64_4way(u32 crc, unsigned char const *p, size_t len);
-
-u32 __pure crc32_le(u32 crc, unsigned char const *p, size_t len)
-{
-	if (!alternative_has_cap_likely(ARM64_HAS_CRC32))
-		return crc32_le_base(crc, p, len);
-
-	if (len >= min_len && cpu_have_named_feature(PMULL) && crypto_simd_usable()) {
-		kernel_neon_begin();
-		crc = crc32_le_arm64_4way(crc, p, len);
-		kernel_neon_end();
-
-		p += round_down(len, 64);
-		len %= 64;
-
-		if (!len)
-			return crc;
-	}
-
-	return crc32_le_arm64(crc, p, len);
-}
-
-u32 __pure __crc32c_le(u32 crc, unsigned char const *p, size_t len)
-{
-	if (!alternative_has_cap_likely(ARM64_HAS_CRC32))
-		return __crc32c_le_base(crc, p, len);
-
-	if (len >= min_len && cpu_have_named_feature(PMULL) && crypto_simd_usable()) {
-		kernel_neon_begin();
-		crc = crc32c_le_arm64_4way(crc, p, len);
-		kernel_neon_end();
-
-		p += round_down(len, 64);
-		len %= 64;
-
-		if (!len)
-			return crc;
-	}
-
-	return crc32c_le_arm64(crc, p, len);
-}
-
-u32 __pure crc32_be(u32 crc, unsigned char const *p, size_t len)
-{
-	if (!alternative_has_cap_likely(ARM64_HAS_CRC32))
-		return crc32_be_base(crc, p, len);
-
-	if (len >= min_len && cpu_have_named_feature(PMULL) && crypto_simd_usable()) {
-		kernel_neon_begin();
-		crc = crc32_be_arm64_4way(crc, p, len);
-		kernel_neon_end();
-
-		p += round_down(len, 64);
-		len %= 64;
-
-		if (!len)
-			return crc;
-	}
-
-	return crc32_be_arm64(crc, p, len);
-}
diff --git a/arch/arm64/lib/crc32.S b/arch/arm64/lib/crc32.S
deleted file mode 100644
index 68825317460f..000000000000
--- a/arch/arm64/lib/crc32.S
+++ /dev/null
@@ -1,362 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Accelerated CRC32(C) using AArch64 CRC and PMULL instructions
- *
- * Copyright (C) 2016 - 2018 Linaro Ltd.
- * Copyright (C) 2024 Google LLC
- *
- * Author: Ard Biesheuvel <ardb@kernel.org>
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.cpu		generic+crc+crypto
-
-	.macro		bitle, reg
-	.endm
-
-	.macro		bitbe, reg
-	rbit		\reg, \reg
-	.endm
-
-	.macro		bytele, reg
-	.endm
-
-	.macro		bytebe, reg
-	rbit		\reg, \reg
-	lsr		\reg, \reg, #24
-	.endm
-
-	.macro		hwordle, reg
-CPU_BE(	rev16		\reg, \reg	)
-	.endm
-
-	.macro		hwordbe, reg
-CPU_LE(	rev		\reg, \reg	)
-	rbit		\reg, \reg
-CPU_BE(	lsr		\reg, \reg, #16	)
-	.endm
-
-	.macro		le, regs:vararg
-	.irp		r, \regs
-CPU_BE(	rev		\r, \r		)
-	.endr
-	.endm
-
-	.macro		be, regs:vararg
-	.irp		r, \regs
-CPU_LE(	rev		\r, \r		)
-	.endr
-	.irp		r, \regs
-	rbit		\r, \r
-	.endr
-	.endm
-
-	.macro		__crc32, c, order=le
-	bit\order	w0
-	cmp		x2, #16
-	b.lt		8f			// less than 16 bytes
-
-	and		x7, x2, #0x1f
-	and		x2, x2, #~0x1f
-	cbz		x7, 32f			// multiple of 32 bytes
-
-	and		x8, x7, #0xf
-	ldp		x3, x4, [x1]
-	add		x8, x8, x1
-	add		x1, x1, x7
-	ldp		x5, x6, [x8]
-	\order		x3, x4, x5, x6
-
-	tst		x7, #8
-	crc32\c\()x	w8, w0, x3
-	csel		x3, x3, x4, eq
-	csel		w0, w0, w8, eq
-	tst		x7, #4
-	lsr		x4, x3, #32
-	crc32\c\()w	w8, w0, w3
-	csel		x3, x3, x4, eq
-	csel		w0, w0, w8, eq
-	tst		x7, #2
-	lsr		w4, w3, #16
-	crc32\c\()h	w8, w0, w3
-	csel		w3, w3, w4, eq
-	csel		w0, w0, w8, eq
-	tst		x7, #1
-	crc32\c\()b	w8, w0, w3
-	csel		w0, w0, w8, eq
-	tst		x7, #16
-	crc32\c\()x	w8, w0, x5
-	crc32\c\()x	w8, w8, x6
-	csel		w0, w0, w8, eq
-	cbz		x2, 0f
-
-32:	ldp		x3, x4, [x1], #32
-	sub		x2, x2, #32
-	ldp		x5, x6, [x1, #-16]
-	\order		x3, x4, x5, x6
-	crc32\c\()x	w0, w0, x3
-	crc32\c\()x	w0, w0, x4
-	crc32\c\()x	w0, w0, x5
-	crc32\c\()x	w0, w0, x6
-	cbnz		x2, 32b
-0:	bit\order	w0
-	ret
-
-8:	tbz		x2, #3, 4f
-	ldr		x3, [x1], #8
-	\order		x3
-	crc32\c\()x	w0, w0, x3
-4:	tbz		x2, #2, 2f
-	ldr		w3, [x1], #4
-	\order		w3
-	crc32\c\()w	w0, w0, w3
-2:	tbz		x2, #1, 1f
-	ldrh		w3, [x1], #2
-	hword\order	w3
-	crc32\c\()h	w0, w0, w3
-1:	tbz		x2, #0, 0f
-	ldrb		w3, [x1]
-	byte\order	w3
-	crc32\c\()b	w0, w0, w3
-0:	bit\order	w0
-	ret
-	.endm
-
-	.align		5
-SYM_FUNC_START(crc32_le_arm64)
-	__crc32
-SYM_FUNC_END(crc32_le_arm64)
-
-	.align		5
-SYM_FUNC_START(crc32c_le_arm64)
-	__crc32		c
-SYM_FUNC_END(crc32c_le_arm64)
-
-	.align		5
-SYM_FUNC_START(crc32_be_arm64)
-	__crc32		order=be
-SYM_FUNC_END(crc32_be_arm64)
-
-	in		.req	x1
-	len		.req	x2
-
-	/*
-	 * w0: input CRC at entry, output CRC at exit
-	 * x1: pointer to input buffer
-	 * x2: length of input in bytes
-	 */
-	.macro		crc4way, insn, table, order=le
-	bit\order	w0
-	lsr		len, len, #6		// len := # of 64-byte blocks
-
-	/* Process up to 64 blocks of 64 bytes at a time */
-.La\@:	mov		x3, #64
-	cmp		len, #64
-	csel		x3, x3, len, hi		// x3 := min(len, 64)
-	sub		len, len, x3
-
-	/* Divide the input into 4 contiguous blocks */
-	add		x4, x3, x3, lsl #1	// x4 :=  3 * x3
-	add		x7, in, x3, lsl #4	// x7 := in + 16 * x3
-	add		x8, in, x3, lsl #5	// x8 := in + 32 * x3
-	add		x9, in, x4, lsl #4	// x9 := in + 16 * x4
-
-	/* Load the folding coefficients from the lookup table */
-	adr_l		x5, \table - 12		// entry 0 omitted
-	add		x5, x5, x4, lsl #2	// x5 += 12 * x3
-	ldp		s0, s1, [x5]
-	ldr		s2, [x5, #8]
-
-	/* Zero init partial CRCs for this iteration */
-	mov		w4, wzr
-	mov		w5, wzr
-	mov		w6, wzr
-	mov		x17, xzr
-
-.Lb\@:	sub		x3, x3, #1
-	\insn		w6, w6, x17
-	ldp		x10, x11, [in], #16
-	ldp		x12, x13, [x7], #16
-	ldp		x14, x15, [x8], #16
-	ldp		x16, x17, [x9], #16
-
-	\order		x10, x11, x12, x13, x14, x15, x16, x17
-
-	/* Apply the CRC transform to 4 16-byte blocks in parallel */
-	\insn		w0, w0, x10
-	\insn		w4, w4, x12
-	\insn		w5, w5, x14
-	\insn		w6, w6, x16
-	\insn		w0, w0, x11
-	\insn		w4, w4, x13
-	\insn		w5, w5, x15
-	cbnz		x3, .Lb\@
-
-	/* Combine the 4 partial results into w0 */
-	mov		v3.d[0], x0
-	mov		v4.d[0], x4
-	mov		v5.d[0], x5
-	pmull		v0.1q, v0.1d, v3.1d
-	pmull		v1.1q, v1.1d, v4.1d
-	pmull		v2.1q, v2.1d, v5.1d
-	eor		v0.8b, v0.8b, v1.8b
-	eor		v0.8b, v0.8b, v2.8b
-	mov		x5, v0.d[0]
-	eor		x5, x5, x17
-	\insn		w0, w6, x5
-
-	mov		in, x9
-	cbnz		len, .La\@
-
-	bit\order	w0
-	ret
-	.endm
-
-	.align		5
-SYM_FUNC_START(crc32c_le_arm64_4way)
-	crc4way		crc32cx, .L0
-SYM_FUNC_END(crc32c_le_arm64_4way)
-
-	.align		5
-SYM_FUNC_START(crc32_le_arm64_4way)
-	crc4way		crc32x, .L1
-SYM_FUNC_END(crc32_le_arm64_4way)
-
-	.align		5
-SYM_FUNC_START(crc32_be_arm64_4way)
-	crc4way		crc32x, .L1, be
-SYM_FUNC_END(crc32_be_arm64_4way)
-
-	.section	.rodata, "a", %progbits
-	.align		6
-.L0:	.long		0xddc0152b, 0xba4fc28e, 0x493c7d27
-	.long		0x0715ce53, 0x9e4addf8, 0xba4fc28e
-	.long		0xc96cfdc0, 0x0715ce53, 0xddc0152b
-	.long		0xab7aff2a, 0x0d3b6092, 0x9e4addf8
-	.long		0x299847d5, 0x878a92a7, 0x39d3b296
-	.long		0xb6dd949b, 0xab7aff2a, 0x0715ce53
-	.long		0xa60ce07b, 0x83348832, 0x47db8317
-	.long		0xd270f1a2, 0xb9e02b86, 0x0d3b6092
-	.long		0x65863b64, 0xb6dd949b, 0xc96cfdc0
-	.long		0xb3e32c28, 0xbac2fd7b, 0x878a92a7
-	.long		0xf285651c, 0xce7f39f4, 0xdaece73e
-	.long		0x271d9844, 0xd270f1a2, 0xab7aff2a
-	.long		0x6cb08e5c, 0x2b3cac5d, 0x2162d385
-	.long		0xcec3662e, 0x1b03397f, 0x83348832
-	.long		0x8227bb8a, 0xb3e32c28, 0x299847d5
-	.long		0xd7a4825c, 0xdd7e3b0c, 0xb9e02b86
-	.long		0xf6076544, 0x10746f3c, 0x18b33a4e
-	.long		0x98d8d9cb, 0x271d9844, 0xb6dd949b
-	.long		0x57a3d037, 0x93a5f730, 0x78d9ccb7
-	.long		0x3771e98f, 0x6b749fb2, 0xbac2fd7b
-	.long		0xe0ac139e, 0xcec3662e, 0xa60ce07b
-	.long		0x6f345e45, 0xe6fc4e6a, 0xce7f39f4
-	.long		0xa2b73df1, 0xb0cd4768, 0x61d82e56
-	.long		0x86d8e4d2, 0xd7a4825c, 0xd270f1a2
-	.long		0xa90fd27a, 0x0167d312, 0xc619809d
-	.long		0xca6ef3ac, 0x26f6a60a, 0x2b3cac5d
-	.long		0x4597456a, 0x98d8d9cb, 0x65863b64
-	.long		0xc9c8b782, 0x68bce87a, 0x1b03397f
-	.long		0x62ec6c6d, 0x6956fc3b, 0xebb883bd
-	.long		0x2342001e, 0x3771e98f, 0xb3e32c28
-	.long		0xe8b6368b, 0x2178513a, 0x064f7f26
-	.long		0x9ef68d35, 0x170076fa, 0xdd7e3b0c
-	.long		0x0b0bf8ca, 0x6f345e45, 0xf285651c
-	.long		0x02ee03b2, 0xff0dba97, 0x10746f3c
-	.long		0x135c83fd, 0xf872e54c, 0xc7a68855
-	.long		0x00bcf5f6, 0x86d8e4d2, 0x271d9844
-	.long		0x58ca5f00, 0x5bb8f1bc, 0x8e766a0c
-	.long		0xded288f8, 0xb3af077a, 0x93a5f730
-	.long		0x37170390, 0xca6ef3ac, 0x6cb08e5c
-	.long		0xf48642e9, 0xdd66cbbb, 0x6b749fb2
-	.long		0xb25b29f2, 0xe9e28eb4, 0x1393e203
-	.long		0x45cddf4e, 0xc9c8b782, 0xcec3662e
-	.long		0xdfd94fb2, 0x93e106a4, 0x96c515bb
-	.long		0x021ac5ef, 0xd813b325, 0xe6fc4e6a
-	.long		0x8e1450f7, 0x2342001e, 0x8227bb8a
-	.long		0xe0cdcf86, 0x6d9a4957, 0xb0cd4768
-	.long		0x613eee91, 0xd2c3ed1a, 0x39c7ff35
-	.long		0xbedc6ba1, 0x9ef68d35, 0xd7a4825c
-	.long		0x0cd1526a, 0xf2271e60, 0x0ab3844b
-	.long		0xd6c3a807, 0x2664fd8b, 0x0167d312
-	.long		0x1d31175f, 0x02ee03b2, 0xf6076544
-	.long		0x4be7fd90, 0x363bd6b3, 0x26f6a60a
-	.long		0x6eeed1c9, 0x5fabe670, 0xa741c1bf
-	.long		0xb3a6da94, 0x00bcf5f6, 0x98d8d9cb
-	.long		0x2e7d11a7, 0x17f27698, 0x49c3cc9c
-	.long		0x889774e1, 0xaa7c7ad5, 0x68bce87a
-	.long		0x8a074012, 0xded288f8, 0x57a3d037
-	.long		0xbd0bb25f, 0x6d390dec, 0x6956fc3b
-	.long		0x3be3c09b, 0x6353c1cc, 0x42d98888
-	.long		0x465a4eee, 0xf48642e9, 0x3771e98f
-	.long		0x2e5f3c8c, 0xdd35bc8d, 0xb42ae3d9
-	.long		0xa52f58ec, 0x9a5ede41, 0x2178513a
-	.long		0x47972100, 0x45cddf4e, 0xe0ac139e
-	.long		0x359674f7, 0xa51b6135, 0x170076fa
-
-.L1:	.long		0xaf449247, 0x81256527, 0xccaa009e
-	.long		0x57c54819, 0x1d9513d7, 0x81256527
-	.long		0x3f41287a, 0x57c54819, 0xaf449247
-	.long		0xf5e48c85, 0x910eeec1, 0x1d9513d7
-	.long		0x1f0c2cdd, 0x9026d5b1, 0xae0b5394
-	.long		0x71d54a59, 0xf5e48c85, 0x57c54819
-	.long		0x1c63267b, 0xfe807bbd, 0x0cbec0ed
-	.long		0xd31343ea, 0xe95c1271, 0x910eeec1
-	.long		0xf9d9c7ee, 0x71d54a59, 0x3f41287a
-	.long		0x9ee62949, 0xcec97417, 0x9026d5b1
-	.long		0xa55d1514, 0xf183c71b, 0xd1df2327
-	.long		0x21aa2b26, 0xd31343ea, 0xf5e48c85
-	.long		0x9d842b80, 0xeea395c4, 0x3c656ced
-	.long		0xd8110ff1, 0xcd669a40, 0xfe807bbd
-	.long		0x3f9e9356, 0x9ee62949, 0x1f0c2cdd
-	.long		0x1d6708a0, 0x0c30f51d, 0xe95c1271
-	.long		0xef82aa68, 0xdb3935ea, 0xb918a347
-	.long		0xd14bcc9b, 0x21aa2b26, 0x71d54a59
-	.long		0x99cce860, 0x356d209f, 0xff6f2fc2
-	.long		0xd8af8e46, 0xc352f6de, 0xcec97417
-	.long		0xf1996890, 0xd8110ff1, 0x1c63267b
-	.long		0x631bc508, 0xe95c7216, 0xf183c71b
-	.long		0x8511c306, 0x8e031a19, 0x9b9bdbd0
-	.long		0xdb3839f3, 0x1d6708a0, 0xd31343ea
-	.long		0x7a92fffb, 0xf7003835, 0x4470ac44
-	.long		0x6ce68f2a, 0x00eba0c8, 0xeea395c4
-	.long		0x4caaa263, 0xd14bcc9b, 0xf9d9c7ee
-	.long		0xb46f7cff, 0x9a1b53c8, 0xcd669a40
-	.long		0x60290934, 0x81b6f443, 0x6d40f445
-	.long		0x8e976a7d, 0xd8af8e46, 0x9ee62949
-	.long		0xdcf5088a, 0x9dbdc100, 0x145575d5
-	.long		0x1753ab84, 0xbbf2f6d6, 0x0c30f51d
-	.long		0x255b139e, 0x631bc508, 0xa55d1514
-	.long		0xd784eaa8, 0xce26786c, 0xdb3935ea
-	.long		0x6d2c864a, 0x8068c345, 0x2586d334
-	.long		0x02072e24, 0xdb3839f3, 0x21aa2b26
-	.long		0x06689b0a, 0x5efd72f5, 0xe0575528
-	.long		0x1e52f5ea, 0x4117915b, 0x356d209f
-	.long		0x1d3d1db6, 0x6ce68f2a, 0x9d842b80
-	.long		0x3796455c, 0xb8e0e4a8, 0xc352f6de
-	.long		0xdf3a4eb3, 0xc55a2330, 0xb84ffa9c
-	.long		0x28ae0976, 0xb46f7cff, 0xd8110ff1
-	.long		0x9764bc8d, 0xd7e7a22c, 0x712510f0
-	.long		0x13a13e18, 0x3e9a43cd, 0xe95c7216
-	.long		0xb8ee242e, 0x8e976a7d, 0x3f9e9356
-	.long		0x0c540e7b, 0x753c81ff, 0x8e031a19
-	.long		0x9924c781, 0xb9220208, 0x3edcde65
-	.long		0x3954de39, 0x1753ab84, 0x1d6708a0
-	.long		0xf32238b5, 0xbec81497, 0x9e70b943
-	.long		0xbbd2cd2c, 0x0925d861, 0xf7003835
-	.long		0xcc401304, 0xd784eaa8, 0xef82aa68
-	.long		0x4987e684, 0x6044fbb0, 0x00eba0c8
-	.long		0x3aa11427, 0x18fe3b4a, 0x87441142
-	.long		0x297aad60, 0x02072e24, 0xd14bcc9b
-	.long		0xf60c5e51, 0x6ef6f487, 0x5b7fdd0a
-	.long		0x632d78c5, 0x3fc33de4, 0x9a1b53c8
-	.long		0x25b8822a, 0x1e52f5ea, 0x99cce860
-	.long		0xd4fc84bc, 0x1af62fb8, 0x81b6f443
-	.long		0x5690aa32, 0xa91fdefb, 0x688a110e
-	.long		0x1357a093, 0x3796455c, 0xd8af8e46
-	.long		0x798fdd33, 0xaaa18a37, 0x357b9517
-	.long		0xc2815395, 0x54d42691, 0x9dbdc100
-	.long		0x21cfc0f7, 0x28ae0976, 0xf1996890
-	.long		0xa0decef3, 0x7b4aa8b7, 0xbbf2f6d6
diff --git a/arch/arm64/lib/insn.c b/arch/arm64/lib/insn.c
index b008a9b46a7f..4e298baddc2e 100644
--- a/arch/arm64/lib/insn.c
+++ b/arch/arm64/lib/insn.c
@@ -5,6 +5,7 @@
  *
  * Copyright (C) 2014-2016 Zi Shen Lim <zlim.lnx@gmail.com>
  */
+#include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/bug.h>
 #include <linux/printk.h>
@@ -540,6 +541,35 @@ u32 aarch64_insn_gen_load_store_pair(enum aarch64_insn_register reg1,
 					     offset >> shift);
 }
 
+u32 aarch64_insn_gen_load_acq_store_rel(enum aarch64_insn_register reg,
+					enum aarch64_insn_register base,
+					enum aarch64_insn_size_type size,
+					enum aarch64_insn_ldst_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_LDST_LOAD_ACQ:
+		insn = aarch64_insn_get_load_acq_value();
+		break;
+	case AARCH64_INSN_LDST_STORE_REL:
+		insn = aarch64_insn_get_store_rel_value();
+		break;
+	default:
+		pr_err("%s: unknown load-acquire/store-release encoding %d\n",
+		       __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_ldst_size(size, insn);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn,
+					    reg);
+
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn,
+					    base);
+}
+
 u32 aarch64_insn_gen_load_store_ex(enum aarch64_insn_register reg,
 				   enum aarch64_insn_register base,
 				   enum aarch64_insn_register state,
@@ -1471,43 +1501,41 @@ u32 aarch64_insn_gen_extr(enum aarch64_insn_variant variant,
 	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, Rm);
 }
 
-u32 aarch64_insn_gen_dmb(enum aarch64_insn_mb_type type)
+static u32 __get_barrier_crm_val(enum aarch64_insn_mb_type type)
 {
-	u32 opt;
-	u32 insn;
-
 	switch (type) {
 	case AARCH64_INSN_MB_SY:
-		opt = 0xf;
-		break;
+		return 0xf;
 	case AARCH64_INSN_MB_ST:
-		opt = 0xe;
-		break;
+		return 0xe;
 	case AARCH64_INSN_MB_LD:
-		opt = 0xd;
-		break;
+		return 0xd;
 	case AARCH64_INSN_MB_ISH:
-		opt = 0xb;
-		break;
+		return 0xb;
 	case AARCH64_INSN_MB_ISHST:
-		opt = 0xa;
-		break;
+		return 0xa;
 	case AARCH64_INSN_MB_ISHLD:
-		opt = 0x9;
-		break;
+		return 0x9;
 	case AARCH64_INSN_MB_NSH:
-		opt = 0x7;
-		break;
+		return 0x7;
 	case AARCH64_INSN_MB_NSHST:
-		opt = 0x6;
-		break;
+		return 0x6;
 	case AARCH64_INSN_MB_NSHLD:
-		opt = 0x5;
-		break;
+		return 0x5;
 	default:
-		pr_err("%s: unknown dmb type %d\n", __func__, type);
+		pr_err("%s: unknown barrier type %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
+}
+
+u32 aarch64_insn_gen_dmb(enum aarch64_insn_mb_type type)
+{
+	u32 opt;
+	u32 insn;
+
+	opt = __get_barrier_crm_val(type);
+	if (opt == AARCH64_BREAK_FAULT)
+		return AARCH64_BREAK_FAULT;
 
 	insn = aarch64_insn_get_dmb_value();
 	insn &= ~GENMASK(11, 8);
@@ -1516,6 +1544,21 @@ u32 aarch64_insn_gen_dmb(enum aarch64_insn_mb_type type)
 	return insn;
 }
 
+u32 aarch64_insn_gen_dsb(enum aarch64_insn_mb_type type)
+{
+	u32 opt, insn;
+
+	opt = __get_barrier_crm_val(type);
+	if (opt == AARCH64_BREAK_FAULT)
+		return AARCH64_BREAK_FAULT;
+
+	insn = aarch64_insn_get_dsb_base_value();
+	insn &= ~GENMASK(11, 8);
+	insn |= (opt << 8);
+
+	return insn;
+}
+
 u32 aarch64_insn_gen_mrs(enum aarch64_insn_register result,
 			 enum aarch64_insn_system_register sysreg)
 {
diff --git a/arch/arm64/lib/xor-neon.c b/arch/arm64/lib/xor-neon.c
index f9a53b7f9842..8fffebfa17b2 100644
--- a/arch/arm64/lib/xor-neon.c
+++ b/arch/arm64/lib/xor-neon.c
@@ -319,7 +319,7 @@ static void xor_arm64_eor3_5(unsigned long bytes,
 
 static int __init xor_neon_init(void)
 {
-	if (IS_ENABLED(CONFIG_AS_HAS_SHA3) && cpu_have_named_feature(SHA3)) {
+	if (cpu_have_named_feature(SHA3)) {
 		xor_block_inner_neon.do_3 = xor_arm64_eor3_3;
 		xor_block_inner_neon.do_4 = xor_arm64_eor3_4;
 		xor_block_inner_neon.do_5 = xor_arm64_eor3_5;
diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile
index fc92170a8f37..c26489cf96cd 100644
--- a/arch/arm64/mm/Makefile
+++ b/arch/arm64/mm/Makefile
@@ -5,7 +5,7 @@ obj-y				:= dma-mapping.o extable.o fault.o init.o \
 				   context.o proc.o pageattr.o fixmap.o
 obj-$(CONFIG_ARM64_CONTPTE)	+= contpte.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_PTDUMP_CORE)	+= ptdump.o
+obj-$(CONFIG_PTDUMP)		+= ptdump.o
 obj-$(CONFIG_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
 obj-$(CONFIG_TRANS_TABLE)	+= trans_pgd.o
 obj-$(CONFIG_TRANS_TABLE)	+= trans_pgd-asm.o
diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c
index 188197590fc9..b2ac06246327 100644
--- a/arch/arm64/mm/context.c
+++ b/arch/arm64/mm/context.c
@@ -32,9 +32,9 @@ static unsigned long nr_pinned_asids;
 static unsigned long *pinned_asid_map;
 
 #define ASID_MASK		(~GENMASK(asid_bits - 1, 0))
-#define ASID_FIRST_VERSION	(1UL << asid_bits)
+#define ASID_FIRST_VERSION	(1UL << 16)
 
-#define NUM_USER_ASIDS		ASID_FIRST_VERSION
+#define NUM_USER_ASIDS		(1UL << asid_bits)
 #define ctxid2asid(asid)	((asid) & ~ASID_MASK)
 #define asid2ctxid(asid, genid)	((asid) | (genid))
 
diff --git a/arch/arm64/mm/contpte.c b/arch/arm64/mm/contpte.c
index 55107d27d3f8..589bcf878938 100644
--- a/arch/arm64/mm/contpte.c
+++ b/arch/arm64/mm/contpte.c
@@ -68,7 +68,144 @@ static void contpte_convert(struct mm_struct *mm, unsigned long addr,
 			pte = pte_mkyoung(pte);
 	}
 
-	__flush_tlb_range(&vma, start_addr, addr, PAGE_SIZE, true, 3);
+	/*
+	 * On eliding the __tlb_flush_range() under BBML2+noabort:
+	 *
+	 * NOTE: Instead of using N=16 as the contiguous block length, we use
+	 *       N=4 for clarity.
+	 *
+	 * NOTE: 'n' and 'c' are used to denote the "contiguous bit" being
+	 *       unset and set, respectively.
+	 *
+	 * We worry about two cases where contiguous bit is used:
+	 *  - When folding N smaller non-contiguous ptes as 1 contiguous block.
+	 *  - When unfolding a contiguous block into N smaller non-contiguous ptes.
+	 *
+	 * Currently, the BBML0 folding case looks as follows:
+	 *
+	 *  0) Initial page-table layout:
+	 *
+	 *   +----+----+----+----+
+	 *   |RO,n|RO,n|RO,n|RW,n| <--- last page being set as RO
+	 *   +----+----+----+----+
+	 *
+	 *  1) Aggregate AF + dirty flags using __ptep_get_and_clear():
+	 *
+	 *   +----+----+----+----+
+	 *   |  0 |  0 |  0 |  0 |
+	 *   +----+----+----+----+
+	 *
+	 *  2) __flush_tlb_range():
+	 *
+	 *   |____ tlbi + dsb ____|
+	 *
+	 *  3) __set_ptes() to repaint contiguous block:
+	 *
+	 *   +----+----+----+----+
+	 *   |RO,c|RO,c|RO,c|RO,c|
+	 *   +----+----+----+----+
+	 *
+	 *  4) The kernel will eventually __flush_tlb() for changed page:
+	 *
+	 *                  |____| <--- tlbi + dsb
+	 *
+	 * As expected, the intermediate tlbi+dsb ensures that other PEs
+	 * only ever see an invalid (0) entry, or the new contiguous TLB entry.
+	 * The final tlbi+dsb will always throw away the newly installed
+	 * contiguous TLB entry, which is a micro-optimisation opportunity,
+	 * but does not affect correctness.
+	 *
+	 * In the BBML2 case, the change is avoiding the intermediate tlbi+dsb.
+	 * This means a few things, but notably other PEs will still "see" any
+	 * stale cached TLB entries. This could lead to a "contiguous bit
+	 * misprogramming" issue until the final tlbi+dsb of the changed page,
+	 * which would clear out both the stale (RW,n) entry and the new (RO,c)
+	 * contiguous entry installed in its place.
+	 *
+	 * What this is saying, is the following:
+	 *
+	 *  +----+----+----+----+
+	 *  |RO,n|RO,n|RO,n|RW,n| <--- old page tables, all non-contiguous
+	 *  +----+----+----+----+
+	 *
+	 *  +----+----+----+----+
+	 *  |RO,c|RO,c|RO,c|RO,c| <--- new page tables, all contiguous
+	 *  +----+----+----+----+
+	 *   /\
+	 *   ||
+	 *
+	 *  If both the old single (RW,n) and new contiguous (RO,c) TLB entries
+	 *  are present, and a write is made to this address, do we fault or
+	 *  is the write permitted (via amalgamation)?
+	 *
+	 * The relevant Arm ARM DDI 0487L.a requirements are RNGLXZ and RJQQTC,
+	 * and together state that when BBML1 or BBML2 are implemented, either
+	 * a TLB conflict abort is raised (which we expressly forbid), or will
+	 * "produce an OA, access permissions, and memory attributes that are
+	 * consistent with any of the programmed translation table values".
+	 *
+	 * That is to say, will either raise a TLB conflict, or produce one of
+	 * the cached TLB entries, but never amalgamate.
+	 *
+	 * Thus, as the page tables are only considered "consistent" after
+	 * the final tlbi+dsb (which evicts both the single stale (RW,n) TLB
+	 * entry as well as the new contiguous (RO,c) TLB entry), omitting the
+	 * initial tlbi+dsb is correct.
+	 *
+	 * It is also important to note that at the end of the BBML2 folding
+	 * case, we are still left with potentially all N TLB entries still
+	 * cached (the N-1 non-contiguous ptes, and the single contiguous
+	 * block). However, over time, natural TLB pressure will cause the
+	 * non-contiguous pte TLB entries to be flushed, leaving only the
+	 * contiguous block TLB entry. This means that omitting the tlbi+dsb is
+	 * not only correct, but also keeps our eventual performance benefits.
+	 *
+	 * For the unfolding case, BBML0 looks as follows:
+	 *
+	 *  0) Initial page-table layout:
+	 *
+	 *   +----+----+----+----+
+	 *   |RW,c|RW,c|RW,c|RW,c| <--- last page being set as RO
+	 *   +----+----+----+----+
+	 *
+	 *  1) Aggregate AF + dirty flags using __ptep_get_and_clear():
+	 *
+	 *   +----+----+----+----+
+	 *   |  0 |  0 |  0 |  0 |
+	 *   +----+----+----+----+
+	 *
+	 *  2) __flush_tlb_range():
+	 *
+	 *   |____ tlbi + dsb ____|
+	 *
+	 *  3) __set_ptes() to repaint as non-contiguous:
+	 *
+	 *   +----+----+----+----+
+	 *   |RW,n|RW,n|RW,n|RW,n|
+	 *   +----+----+----+----+
+	 *
+	 *  4) Update changed page permissions:
+	 *
+	 *   +----+----+----+----+
+	 *   |RW,n|RW,n|RW,n|RO,n| <--- last page permissions set
+	 *   +----+----+----+----+
+	 *
+	 *  5) The kernel will eventually __flush_tlb() for changed page:
+	 *
+	 *                  |____| <--- tlbi + dsb
+	 *
+	 * For BBML2, we again remove the intermediate tlbi+dsb. Here, there
+	 * are no issues, as the final tlbi+dsb covering the changed page is
+	 * guaranteed to remove the original large contiguous (RW,c) TLB entry,
+	 * as well as the intermediate (RW,n) TLB entry; the next access will
+	 * install the new (RO,n) TLB entry and the page tables are only
+	 * considered "consistent" after the final tlbi+dsb, so software must
+	 * be prepared for this inconsistency prior to finishing the mm dance
+	 * regardless.
+	 */
+
+	if (!system_supports_bbml2_noabort())
+		__flush_tlb_range(&vma, start_addr, addr, PAGE_SIZE, true, 3);
 
 	__set_ptes(mm, start_addr, start_ptep, pte, CONT_PTES);
 }
@@ -169,17 +306,46 @@ pte_t contpte_ptep_get(pte_t *ptep, pte_t orig_pte)
 	for (i = 0; i < CONT_PTES; i++, ptep++) {
 		pte = __ptep_get(ptep);
 
-		if (pte_dirty(pte))
+		if (pte_dirty(pte)) {
 			orig_pte = pte_mkdirty(orig_pte);
-
-		if (pte_young(pte))
+			for (; i < CONT_PTES; i++, ptep++) {
+				pte = __ptep_get(ptep);
+				if (pte_young(pte)) {
+					orig_pte = pte_mkyoung(orig_pte);
+					break;
+				}
+			}
+			break;
+		}
+
+		if (pte_young(pte)) {
 			orig_pte = pte_mkyoung(orig_pte);
+			i++;
+			ptep++;
+			for (; i < CONT_PTES; i++, ptep++) {
+				pte = __ptep_get(ptep);
+				if (pte_dirty(pte)) {
+					orig_pte = pte_mkdirty(orig_pte);
+					break;
+				}
+			}
+			break;
+		}
 	}
 
 	return orig_pte;
 }
 EXPORT_SYMBOL_GPL(contpte_ptep_get);
 
+static inline bool contpte_is_consistent(pte_t pte, unsigned long pfn,
+					pgprot_t orig_prot)
+{
+	pgprot_t prot = pte_pgprot(pte_mkold(pte_mkclean(pte)));
+
+	return pte_valid_cont(pte) && pte_pfn(pte) == pfn &&
+			pgprot_val(prot) == pgprot_val(orig_prot);
+}
+
 pte_t contpte_ptep_get_lockless(pte_t *orig_ptep)
 {
 	/*
@@ -202,7 +368,6 @@ pte_t contpte_ptep_get_lockless(pte_t *orig_ptep)
 	pgprot_t orig_prot;
 	unsigned long pfn;
 	pte_t orig_pte;
-	pgprot_t prot;
 	pte_t *ptep;
 	pte_t pte;
 	int i;
@@ -219,18 +384,44 @@ retry:
 
 	for (i = 0; i < CONT_PTES; i++, ptep++, pfn++) {
 		pte = __ptep_get(ptep);
-		prot = pte_pgprot(pte_mkold(pte_mkclean(pte)));
 
-		if (!pte_valid_cont(pte) ||
-		   pte_pfn(pte) != pfn ||
-		   pgprot_val(prot) != pgprot_val(orig_prot))
+		if (!contpte_is_consistent(pte, pfn, orig_prot))
 			goto retry;
 
-		if (pte_dirty(pte))
+		if (pte_dirty(pte)) {
 			orig_pte = pte_mkdirty(orig_pte);
+			for (; i < CONT_PTES; i++, ptep++, pfn++) {
+				pte = __ptep_get(ptep);
+
+				if (!contpte_is_consistent(pte, pfn, orig_prot))
+					goto retry;
+
+				if (pte_young(pte)) {
+					orig_pte = pte_mkyoung(orig_pte);
+					break;
+				}
+			}
+			break;
+		}
 
-		if (pte_young(pte))
+		if (pte_young(pte)) {
 			orig_pte = pte_mkyoung(orig_pte);
+			i++;
+			ptep++;
+			pfn++;
+			for (; i < CONT_PTES; i++, ptep++, pfn++) {
+				pte = __ptep_get(ptep);
+
+				if (!contpte_is_consistent(pte, pfn, orig_prot))
+					goto retry;
+
+				if (pte_dirty(pte)) {
+					orig_pte = pte_mkdirty(orig_pte);
+					break;
+				}
+			}
+			break;
+		}
 	}
 
 	return orig_pte;
@@ -335,7 +526,7 @@ int contpte_ptep_clear_flush_young(struct vm_area_struct *vma,
 		 * eliding the trailing DSB applies here.
 		 */
 		addr = ALIGN_DOWN(addr, CONT_PTE_SIZE);
-		__flush_tlb_range_nosync(vma, addr, addr + CONT_PTE_SIZE,
+		__flush_tlb_range_nosync(vma->vm_mm, addr, addr + CONT_PTE_SIZE,
 					 PAGE_SIZE, true, 3);
 	}
 
@@ -431,8 +622,7 @@ int contpte_ptep_set_access_flags(struct vm_area_struct *vma,
 			__ptep_set_access_flags(vma, addr, ptep, entry, 0);
 
 		if (dirty)
-			__flush_tlb_range(vma, start_addr, addr,
-							PAGE_SIZE, true, 3);
+			local_flush_tlb_contpte(vma, start_addr);
 	} else {
 		__contpte_try_unfold(vma->vm_mm, addr, ptep, orig_pte);
 		__ptep_set_access_flags(vma, addr, ptep, entry, dirty);
diff --git a/arch/arm64/mm/copypage.c b/arch/arm64/mm/copypage.c
index 87b3f1a25535..cd5912ba617b 100644
--- a/arch/arm64/mm/copypage.c
+++ b/arch/arm64/mm/copypage.c
@@ -30,11 +30,13 @@ void copy_highpage(struct page *to, struct page *from)
 	if (!system_supports_mte())
 		return;
 
-	if (folio_test_hugetlb(src) &&
-	    folio_test_hugetlb_mte_tagged(src)) {
-		if (!folio_try_hugetlb_mte_tagging(dst))
+	if (folio_test_hugetlb(src)) {
+		if (!folio_test_hugetlb_mte_tagged(src) ||
+		    from != folio_page(src, 0))
 			return;
 
+		folio_try_hugetlb_mte_tagging(dst);
+
 		/*
 		 * Populate tags for all subpages.
 		 *
@@ -49,8 +51,13 @@ void copy_highpage(struct page *to, struct page *from)
 		}
 		folio_set_hugetlb_mte_tagged(dst);
 	} else if (page_mte_tagged(from)) {
-		/* It's a new page, shouldn't have been tagged yet */
-		WARN_ON_ONCE(!try_page_mte_tagging(to));
+		/*
+		 * Most of the time it's a new page that shouldn't have been
+		 * tagged yet. However, folio migration can end up reusing the
+		 * same page without untagging it. Ignore the warning if the
+		 * page is already tagged.
+		 */
+		try_page_mte_tagging(to);
 
 		mte_copy_page_tags(kto, kfrom);
 		set_page_mte_tagged(to);
diff --git a/arch/arm64/mm/extable.c b/arch/arm64/mm/extable.c
index 228d681a8715..6e0528831cd3 100644
--- a/arch/arm64/mm/extable.c
+++ b/arch/arm64/mm/extable.c
@@ -8,8 +8,33 @@
 #include <linux/uaccess.h>
 
 #include <asm/asm-extable.h>
+#include <asm/esr.h>
 #include <asm/ptrace.h>
 
+static bool cpy_faulted_on_uaccess(const struct exception_table_entry *ex,
+				   unsigned long esr)
+{
+	bool uaccess_is_write = FIELD_GET(EX_DATA_UACCESS_WRITE, ex->data);
+	bool fault_on_write = esr & ESR_ELx_WNR;
+
+	return uaccess_is_write == fault_on_write;
+}
+
+bool insn_may_access_user(unsigned long addr, unsigned long esr)
+{
+	const struct exception_table_entry *ex = search_exception_tables(addr);
+
+	if (!ex)
+		return false;
+
+	switch (ex->type) {
+	case EX_TYPE_UACCESS_CPY:
+		return cpy_faulted_on_uaccess(ex, esr);
+	default:
+		return true;
+	}
+}
+
 static inline unsigned long
 get_ex_fixup(const struct exception_table_entry *ex)
 {
@@ -29,6 +54,17 @@ static bool ex_handler_uaccess_err_zero(const struct exception_table_entry *ex,
 	return true;
 }
 
+static bool ex_handler_uaccess_cpy(const struct exception_table_entry *ex,
+				   struct pt_regs *regs, unsigned long esr)
+{
+	/* Do not fix up faults on kernel memory accesses */
+	if (!cpy_faulted_on_uaccess(ex, esr))
+		return false;
+
+	regs->pc = get_ex_fixup(ex);
+	return true;
+}
+
 static bool
 ex_handler_load_unaligned_zeropad(const struct exception_table_entry *ex,
 				  struct pt_regs *regs)
@@ -56,7 +92,7 @@ ex_handler_load_unaligned_zeropad(const struct exception_table_entry *ex,
 	return true;
 }
 
-bool fixup_exception(struct pt_regs *regs)
+bool fixup_exception(struct pt_regs *regs, unsigned long esr)
 {
 	const struct exception_table_entry *ex;
 
@@ -70,6 +106,8 @@ bool fixup_exception(struct pt_regs *regs)
 	case EX_TYPE_UACCESS_ERR_ZERO:
 	case EX_TYPE_KACCESS_ERR_ZERO:
 		return ex_handler_uaccess_err_zero(ex, regs);
+	case EX_TYPE_UACCESS_CPY:
+		return ex_handler_uaccess_cpy(ex, regs, esr);
 	case EX_TYPE_LOAD_UNALIGNED_ZEROPAD:
 		return ex_handler_load_unaligned_zeropad(ex, regs);
 	}
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index ef63651099a9..be9dab2c7d6a 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -53,18 +53,12 @@ struct fault_info {
 };
 
 static const struct fault_info fault_info[];
-static struct fault_info debug_fault_info[];
 
 static inline const struct fault_info *esr_to_fault_info(unsigned long esr)
 {
 	return fault_info + (esr & ESR_ELx_FSC);
 }
 
-static inline const struct fault_info *esr_to_debug_fault_info(unsigned long esr)
-{
-	return debug_fault_info + DBG_ESR_EVT(esr);
-}
-
 static void data_abort_decode(unsigned long esr)
 {
 	unsigned long iss2 = ESR_ELx_ISS2(esr);
@@ -239,9 +233,13 @@ int __ptep_set_access_flags(struct vm_area_struct *vma,
 		pteval = cmpxchg_relaxed(&pte_val(*ptep), old_pteval, pteval);
 	} while (pteval != old_pteval);
 
-	/* Invalidate a stale read-only entry */
+	/*
+	 * Invalidate the local stale read-only entry.  Remote stale entries
+	 * may still cause page faults and be invalidated via
+	 * flush_tlb_fix_spurious_fault().
+	 */
 	if (dirty)
-		flush_tlb_page(vma, address);
+		local_flush_tlb_page(vma, address);
 	return 1;
 }
 
@@ -375,7 +373,7 @@ static void __do_kernel_fault(unsigned long addr, unsigned long esr,
 	 * Are we prepared to handle this kernel fault?
 	 * We are almost certainly not prepared to handle instruction faults.
 	 */
-	if (!is_el1_instruction_abort(esr) && fixup_exception(regs))
+	if (!is_el1_instruction_abort(esr) && fixup_exception(regs, esr))
 		return;
 
 	if (WARN_RATELIMIT(is_spurious_el1_translation_fault(addr, esr, regs),
@@ -487,17 +485,29 @@ static void do_bad_area(unsigned long far, unsigned long esr,
 	}
 }
 
-static bool fault_from_pkey(unsigned long esr, struct vm_area_struct *vma,
-			unsigned int mm_flags)
+static bool fault_from_pkey(struct vm_area_struct *vma, unsigned int mm_flags)
 {
-	unsigned long iss2 = ESR_ELx_ISS2(esr);
-
 	if (!system_supports_poe())
 		return false;
 
-	if (esr_fsc_is_permission_fault(esr) && (iss2 & ESR_ELx_Overlay))
-		return true;
-
+	/*
+	 * We do not check whether an Overlay fault has occurred because we
+	 * cannot make a decision based solely on its value:
+	 *
+	 * - If Overlay is set, a fault did occur due to POE, but it may be
+	 *   spurious in those cases where we update POR_EL0 without ISB (e.g.
+	 *   on context-switch). We would then need to manually check POR_EL0
+	 *   against vma_pkey(vma), which is exactly what
+	 *   arch_vma_access_permitted() does.
+	 *
+	 * - If Overlay is not set, we may still need to report a pkey fault.
+	 *   This is the case if an access was made within a mapping but with no
+	 *   page mapped, and POR_EL0 forbids the access (according to
+	 *   vma_pkey()). Such access will result in a SIGSEGV regardless
+	 *   because core code checks arch_vma_access_permitted(), but in order
+	 *   to report the correct error code - SEGV_PKUERR - we must handle
+	 *   that case here.
+	 */
 	return !arch_vma_access_permitted(vma,
 			mm_flags & FAULT_FLAG_WRITE,
 			mm_flags & FAULT_FLAG_INSTRUCTION,
@@ -549,7 +559,7 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 	const struct fault_info *inf;
 	struct mm_struct *mm = current->mm;
 	vm_fault_t fault;
-	unsigned long vm_flags;
+	vm_flags_t vm_flags;
 	unsigned int mm_flags = FAULT_FLAG_DEFAULT;
 	unsigned long addr = untagged_addr(far);
 	struct vm_area_struct *vma;
@@ -606,7 +616,7 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 			die_kernel_fault("execution of user memory",
 					 addr, esr, regs);
 
-		if (!search_exception_tables(regs->pc))
+		if (!insn_may_access_user(regs->pc, esr))
 			die_kernel_fault("access to user memory outside uaccess routines",
 					 addr, esr, regs);
 	}
@@ -635,7 +645,7 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 		goto bad_area;
 	}
 
-	if (fault_from_pkey(esr, vma, mm_flags)) {
+	if (fault_from_pkey(vma, mm_flags)) {
 		pkey = vma_pkey(vma);
 		vma_end_read(vma);
 		fault = 0;
@@ -679,7 +689,7 @@ retry:
 		goto bad_area;
 	}
 
-	if (fault_from_pkey(esr, vma, mm_flags)) {
+	if (fault_from_pkey(vma, mm_flags)) {
 		pkey = vma_pkey(vma);
 		mmap_read_unlock(mm);
 		fault = 0;
@@ -826,6 +836,7 @@ static int do_sea(unsigned long far, unsigned long esr, struct pt_regs *regs)
 		 */
 		siaddr  = untagged_addr(far);
 	}
+	add_taint(TAINT_MACHINE_CHECK, LOCKDEP_STILL_OK);
 	arm64_notify_die(inf->name, regs, inf->sig, inf->code, siaddr, esr);
 
 	return 0;
@@ -837,9 +848,12 @@ static int do_tag_check_fault(unsigned long far, unsigned long esr,
 	/*
 	 * The architecture specifies that bits 63:60 of FAR_EL1 are UNKNOWN
 	 * for tag check faults. Set them to corresponding bits in the untagged
-	 * address.
+	 * address if ARM64_MTE_FAR isn't supported.
+	 * Otherwise, bits 63:60 of FAR_EL1 are not UNKNOWN.
 	 */
-	far = (__untagged_addr(far) & ~MTE_TAG_MASK) | (far & MTE_TAG_MASK);
+	if (!cpus_have_cap(ARM64_MTE_FAR))
+		far = (__untagged_addr(far) & ~MTE_TAG_MASK) | (far & MTE_TAG_MASK);
+
 	do_bad_area(far, esr, regs);
 	return 0;
 }
@@ -939,75 +953,6 @@ void do_sp_pc_abort(unsigned long addr, unsigned long esr, struct pt_regs *regs)
 NOKPROBE_SYMBOL(do_sp_pc_abort);
 
 /*
- * __refdata because early_brk64 is __init, but the reference to it is
- * clobbered at arch_initcall time.
- * See traps.c and debug-monitors.c:debug_traps_init().
- */
-static struct fault_info __refdata debug_fault_info[] = {
-	{ do_bad,	SIGTRAP,	TRAP_HWBKPT,	"hardware breakpoint"	},
-	{ do_bad,	SIGTRAP,	TRAP_HWBKPT,	"hardware single-step"	},
-	{ do_bad,	SIGTRAP,	TRAP_HWBKPT,	"hardware watchpoint"	},
-	{ do_bad,	SIGKILL,	SI_KERNEL,	"unknown 3"		},
-	{ do_bad,	SIGTRAP,	TRAP_BRKPT,	"aarch32 BKPT"		},
-	{ do_bad,	SIGKILL,	SI_KERNEL,	"aarch32 vector catch"	},
-	{ early_brk64,	SIGTRAP,	TRAP_BRKPT,	"aarch64 BRK"		},
-	{ do_bad,	SIGKILL,	SI_KERNEL,	"unknown 7"		},
-};
-
-void __init hook_debug_fault_code(int nr,
-				  int (*fn)(unsigned long, unsigned long, struct pt_regs *),
-				  int sig, int code, const char *name)
-{
-	BUG_ON(nr < 0 || nr >= ARRAY_SIZE(debug_fault_info));
-
-	debug_fault_info[nr].fn		= fn;
-	debug_fault_info[nr].sig	= sig;
-	debug_fault_info[nr].code	= code;
-	debug_fault_info[nr].name	= name;
-}
-
-/*
- * In debug exception context, we explicitly disable preemption despite
- * having interrupts disabled.
- * This serves two purposes: it makes it much less likely that we would
- * accidentally schedule in exception context and it will force a warning
- * if we somehow manage to schedule by accident.
- */
-static void debug_exception_enter(struct pt_regs *regs)
-{
-	preempt_disable();
-
-	/* This code is a bit fragile.  Test it. */
-	RCU_LOCKDEP_WARN(!rcu_is_watching(), "exception_enter didn't work");
-}
-NOKPROBE_SYMBOL(debug_exception_enter);
-
-static void debug_exception_exit(struct pt_regs *regs)
-{
-	preempt_enable_no_resched();
-}
-NOKPROBE_SYMBOL(debug_exception_exit);
-
-void do_debug_exception(unsigned long addr_if_watchpoint, unsigned long esr,
-			struct pt_regs *regs)
-{
-	const struct fault_info *inf = esr_to_debug_fault_info(esr);
-	unsigned long pc = instruction_pointer(regs);
-
-	debug_exception_enter(regs);
-
-	if (user_mode(regs) && !is_ttbr0_addr(pc))
-		arm64_apply_bp_hardening();
-
-	if (inf->fn(addr_if_watchpoint, esr, regs)) {
-		arm64_notify_die(inf->name, regs, inf->sig, inf->code, pc, esr);
-	}
-
-	debug_exception_exit(regs);
-}
-NOKPROBE_SYMBOL(do_debug_exception);
-
-/*
  * Used during anonymous page fault handling.
  */
 struct folio *vma_alloc_zeroed_movable_folio(struct vm_area_struct *vma,
@@ -1026,10 +971,21 @@ struct folio *vma_alloc_zeroed_movable_folio(struct vm_area_struct *vma,
 	return vma_alloc_folio(flags, 0, vma, vaddr);
 }
 
-void tag_clear_highpage(struct page *page)
+bool tag_clear_highpages(struct page *page, int numpages)
 {
-	/* Newly allocated page, shouldn't have been tagged yet */
-	WARN_ON_ONCE(!try_page_mte_tagging(page));
-	mte_zero_clear_page_tags(page_address(page));
-	set_page_mte_tagged(page);
+	/*
+	 * Check if MTE is supported and fall back to clear_highpage().
+	 * get_huge_zero_folio() unconditionally passes __GFP_ZEROTAGS and
+	 * post_alloc_hook() will invoke tag_clear_highpages().
+	 */
+	if (!system_supports_mte())
+		return false;
+
+	/* Newly allocated pages, shouldn't have been tagged yet */
+	for (int i = 0; i < numpages; i++, page++) {
+		WARN_ON_ONCE(!try_page_mte_tagging(page));
+		mte_zero_clear_page_tags(page_address(page));
+		set_page_mte_tagged(page);
+	}
+	return true;
 }
diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c
index 013eead9b695..fbf08b543c3f 100644
--- a/arch/arm64/mm/flush.c
+++ b/arch/arm64/mm/flush.c
@@ -53,11 +53,11 @@ void __sync_icache_dcache(pte_t pte)
 {
 	struct folio *folio = page_folio(pte_page(pte));
 
-	if (!test_bit(PG_dcache_clean, &folio->flags)) {
+	if (!test_bit(PG_dcache_clean, &folio->flags.f)) {
 		sync_icache_aliases((unsigned long)folio_address(folio),
 				    (unsigned long)folio_address(folio) +
 					    folio_size(folio));
-		set_bit(PG_dcache_clean, &folio->flags);
+		set_bit(PG_dcache_clean, &folio->flags.f);
 	}
 }
 EXPORT_SYMBOL_GPL(__sync_icache_dcache);
@@ -69,8 +69,8 @@ EXPORT_SYMBOL_GPL(__sync_icache_dcache);
  */
 void flush_dcache_folio(struct folio *folio)
 {
-	if (test_bit(PG_dcache_clean, &folio->flags))
-		clear_bit(PG_dcache_clean, &folio->flags);
+	if (test_bit(PG_dcache_clean, &folio->flags.f))
+		clear_bit(PG_dcache_clean, &folio->flags.f);
 }
 EXPORT_SYMBOL(flush_dcache_folio);
 
diff --git a/arch/arm64/mm/gcs.c b/arch/arm64/mm/gcs.c
index 5c46ec527b1c..6e93f78de79b 100644
--- a/arch/arm64/mm/gcs.c
+++ b/arch/arm64/mm/gcs.c
@@ -157,12 +157,6 @@ void gcs_free(struct task_struct *task)
 	if (!system_supports_gcs())
 		return;
 
-	/*
-	 * When fork() with CLONE_VM fails, the child (tsk) already
-	 * has a GCS allocated, and exit_thread() calls this function
-	 * to free it.  In this case the parent (current) and the
-	 * child share the same mm struct.
-	 */
 	if (!task->mm || task->mm != current->mm)
 		return;
 
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index 3215adf48a1b..1d90a7e75333 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -100,20 +100,11 @@ static int find_num_contig(struct mm_struct *mm, unsigned long addr,
 
 static inline int num_contig_ptes(unsigned long size, size_t *pgsize)
 {
-	int contig_ptes = 0;
+	int contig_ptes = 1;
 
 	*pgsize = size;
 
 	switch (size) {
-#ifndef __PAGETABLE_PMD_FOLDED
-	case PUD_SIZE:
-		if (pud_sect_supported())
-			contig_ptes = 1;
-		break;
-#endif
-	case PMD_SIZE:
-		contig_ptes = 1;
-		break;
 	case CONT_PMD_SIZE:
 		*pgsize = PMD_SIZE;
 		contig_ptes = CONT_PMDS;
@@ -122,6 +113,8 @@ static inline int num_contig_ptes(unsigned long size, size_t *pgsize)
 		*pgsize = PAGE_SIZE;
 		contig_ptes = CONT_PTES;
 		break;
+	default:
+		WARN_ON(!__hugetlb_valid_size(size));
 	}
 
 	return contig_ptes;
@@ -136,7 +129,7 @@ pte_t huge_ptep_get(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 	if (!pte_present(orig_pte) || !pte_cont(orig_pte))
 		return orig_pte;
 
-	ncontig = num_contig_ptes(page_size(pte_page(orig_pte)), &pgsize);
+	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
 	for (i = 0; i < ncontig; i++, ptep++) {
 		pte_t pte = __ptep_get(ptep);
 
@@ -163,24 +156,22 @@ static pte_t get_clear_contig(struct mm_struct *mm,
 			     unsigned long pgsize,
 			     unsigned long ncontig)
 {
-	pte_t orig_pte = __ptep_get(ptep);
-	unsigned long i;
-
-	for (i = 0; i < ncontig; i++, addr += pgsize, ptep++) {
-		pte_t pte = __ptep_get_and_clear(mm, addr, ptep);
-
-		/*
-		 * If HW_AFDBM is enabled, then the HW could turn on
-		 * the dirty or accessed bit for any page in the set,
-		 * so check them all.
-		 */
-		if (pte_dirty(pte))
-			orig_pte = pte_mkdirty(orig_pte);
-
-		if (pte_young(pte))
-			orig_pte = pte_mkyoung(orig_pte);
+	pte_t pte, tmp_pte;
+	bool present;
+
+	pte = __ptep_get_and_clear_anysz(mm, ptep, pgsize);
+	present = pte_present(pte);
+	while (--ncontig) {
+		ptep++;
+		tmp_pte = __ptep_get_and_clear_anysz(mm, ptep, pgsize);
+		if (present) {
+			if (pte_dirty(tmp_pte))
+				pte = pte_mkdirty(pte);
+			if (pte_young(tmp_pte))
+				pte = pte_mkyoung(pte);
+		}
 	}
-	return orig_pte;
+	return pte;
 }
 
 static pte_t get_clear_contig_flush(struct mm_struct *mm,
@@ -191,8 +182,9 @@ static pte_t get_clear_contig_flush(struct mm_struct *mm,
 {
 	pte_t orig_pte = get_clear_contig(mm, addr, ptep, pgsize, ncontig);
 	struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
+	unsigned long end = addr + (pgsize * ncontig);
 
-	flush_tlb_range(&vma, addr, addr + (pgsize * ncontig));
+	__flush_hugetlb_tlb_range(&vma, addr, end, pgsize, true);
 	return orig_pte;
 }
 
@@ -215,9 +207,12 @@ static void clear_flush(struct mm_struct *mm,
 	unsigned long i, saddr = addr;
 
 	for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)
-		__ptep_get_and_clear(mm, addr, ptep);
+		__ptep_get_and_clear_anysz(mm, ptep, pgsize);
 
-	flush_tlb_range(&vma, saddr, addr);
+	if (mm == &init_mm)
+		flush_tlb_kernel_range(saddr, addr);
+	else
+		__flush_hugetlb_tlb_range(&vma, saddr, addr, pgsize, true);
 }
 
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
@@ -226,30 +221,20 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 	size_t pgsize;
 	int i;
 	int ncontig;
-	unsigned long pfn, dpfn;
-	pgprot_t hugeprot;
 
 	ncontig = num_contig_ptes(sz, &pgsize);
 
 	if (!pte_present(pte)) {
-		for (i = 0; i < ncontig; i++, ptep++, addr += pgsize)
-			__set_ptes(mm, addr, ptep, pte, 1);
-		return;
-	}
-
-	if (!pte_cont(pte)) {
-		__set_ptes(mm, addr, ptep, pte, 1);
+		for (i = 0; i < ncontig; i++, ptep++)
+			__set_ptes_anysz(mm, ptep, pte, 1, pgsize);
 		return;
 	}
 
-	pfn = pte_pfn(pte);
-	dpfn = pgsize >> PAGE_SHIFT;
-	hugeprot = pte_pgprot(pte);
-
-	clear_flush(mm, addr, ptep, pgsize, ncontig);
+	/* Only need to "break" if transitioning valid -> valid. */
+	if (pte_cont(pte) && pte_valid(__ptep_get(ptep)))
+		clear_flush(mm, addr, ptep, pgsize, ncontig);
 
-	for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
-		__set_ptes(mm, addr, ptep, pfn_pte(pfn, hugeprot), 1);
+	__set_ptes_anysz(mm, ptep, pte, ncontig, pgsize);
 }
 
 pte_t *huge_pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
@@ -342,7 +327,9 @@ unsigned long hugetlb_mask_last_page(struct hstate *h)
 	switch (hp_size) {
 #ifndef __PAGETABLE_PMD_FOLDED
 	case PUD_SIZE:
-		return PGDIR_SIZE - PUD_SIZE;
+		if (pud_sect_supported())
+			return PGDIR_SIZE - PUD_SIZE;
+		break;
 #endif
 	case CONT_PMD_SIZE:
 		return PUD_SIZE - CONT_PMD_SIZE;
@@ -364,23 +351,21 @@ pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags_t flags)
 	switch (pagesize) {
 #ifndef __PAGETABLE_PMD_FOLDED
 	case PUD_SIZE:
-		entry = pud_pte(pud_mkhuge(pte_pud(entry)));
+		if (pud_sect_supported())
+			return pud_pte(pud_mkhuge(pte_pud(entry)));
 		break;
 #endif
 	case CONT_PMD_SIZE:
-		entry = pmd_pte(pmd_mkcont(pte_pmd(entry)));
-		fallthrough;
+		return pmd_pte(pmd_mkhuge(pmd_mkcont(pte_pmd(entry))));
 	case PMD_SIZE:
-		entry = pmd_pte(pmd_mkhuge(pte_pmd(entry)));
-		break;
+		return pmd_pte(pmd_mkhuge(pte_pmd(entry)));
 	case CONT_PTE_SIZE:
-		entry = pte_mkcont(entry);
-		break;
+		return pte_mkcont(entry);
 	default:
-		pr_warn("%s: unrecognized huge page size 0x%lx\n",
-			__func__, pagesize);
 		break;
 	}
+	pr_warn("%s: unrecognized huge page size 0x%lx\n",
+		__func__, pagesize);
 	return entry;
 }
 
@@ -396,18 +381,13 @@ void huge_pte_clear(struct mm_struct *mm, unsigned long addr,
 		__pte_clear(mm, addr, ptep);
 }
 
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-			      unsigned long addr, pte_t *ptep)
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, unsigned long sz)
 {
 	int ncontig;
 	size_t pgsize;
-	pte_t orig_pte = __ptep_get(ptep);
-
-	if (!pte_cont(orig_pte))
-		return __ptep_get_and_clear(mm, addr, ptep);
-
-	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
 
+	ncontig = num_contig_ptes(sz, &pgsize);
 	return get_clear_contig(mm, addr, ptep, pgsize, ncontig);
 }
 
@@ -444,23 +424,23 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 			       unsigned long addr, pte_t *ptep,
 			       pte_t pte, int dirty)
 {
-	int ncontig, i;
+	int ncontig;
 	size_t pgsize = 0;
-	unsigned long pfn = pte_pfn(pte), dpfn;
 	struct mm_struct *mm = vma->vm_mm;
-	pgprot_t hugeprot;
 	pte_t orig_pte;
 
+	VM_WARN_ON(!pte_present(pte));
+
 	if (!pte_cont(pte))
 		return __ptep_set_access_flags(vma, addr, ptep, pte, dirty);
 
-	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
-	dpfn = pgsize >> PAGE_SHIFT;
+	ncontig = num_contig_ptes(huge_page_size(hstate_vma(vma)), &pgsize);
 
 	if (!__cont_access_flags_changed(ptep, pte, ncontig))
 		return 0;
 
 	orig_pte = get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
+	VM_WARN_ON(!pte_present(orig_pte));
 
 	/* Make sure we don't lose the dirty or young state */
 	if (pte_dirty(orig_pte))
@@ -469,38 +449,31 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma,
 	if (pte_young(orig_pte))
 		pte = pte_mkyoung(pte);
 
-	hugeprot = pte_pgprot(pte);
-	for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
-		__set_ptes(mm, addr, ptep, pfn_pte(pfn, hugeprot), 1);
-
+	__set_ptes_anysz(mm, ptep, pte, ncontig, pgsize);
 	return 1;
 }
 
 void huge_ptep_set_wrprotect(struct mm_struct *mm,
 			     unsigned long addr, pte_t *ptep)
 {
-	unsigned long pfn, dpfn;
-	pgprot_t hugeprot;
-	int ncontig, i;
+	int ncontig;
 	size_t pgsize;
 	pte_t pte;
 
-	if (!pte_cont(__ptep_get(ptep))) {
+	pte = __ptep_get(ptep);
+	VM_WARN_ON(!pte_present(pte));
+
+	if (!pte_cont(pte)) {
 		__ptep_set_wrprotect(mm, addr, ptep);
 		return;
 	}
 
 	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
-	dpfn = pgsize >> PAGE_SHIFT;
 
 	pte = get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
 	pte = pte_wrprotect(pte);
 
-	hugeprot = pte_pgprot(pte);
-	pfn = pte_pfn(pte);
-
-	for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
-		__set_ptes(mm, addr, ptep, pfn_pte(pfn, hugeprot), 1);
+	__set_ptes_anysz(mm, ptep, pte, ncontig, pgsize);
 }
 
 pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
@@ -510,15 +483,24 @@ pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
 	size_t pgsize;
 	int ncontig;
 
-	if (!pte_cont(__ptep_get(ptep)))
-		return ptep_clear_flush(vma, addr, ptep);
-
-	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
+	ncontig = num_contig_ptes(huge_page_size(hstate_vma(vma)), &pgsize);
 	return get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
 }
 
 static int __init hugetlbpage_init(void)
 {
+	/*
+	 * HugeTLB pages are supported on maximum four page table
+	 * levels (PUD, CONT PMD, PMD, CONT PTE) for a given base
+	 * page size, corresponding to hugetlb_add_hstate() calls
+	 * here.
+	 *
+	 * HUGE_MAX_HSTATE should at least match maximum supported
+	 * HugeTLB page sizes on the platform. Any new addition to
+	 * supported HugeTLB page sizes will also require changing
+	 * HUGE_MAX_HSTATE as well.
+	 */
+	BUILD_BUG_ON(HUGE_MAX_HSTATE < 4);
 	if (pud_sect_supported())
 		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
 
@@ -537,6 +519,8 @@ bool __init arch_hugetlb_valid_size(unsigned long size)
 
 pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
 {
+	unsigned long psize = huge_page_size(hstate_vma(vma));
+
 	if (alternative_has_cap_unlikely(ARM64_WORKAROUND_2645198)) {
 		/*
 		 * Break-before-make (BBM) is required for all user space mappings
@@ -546,7 +530,7 @@ pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr
 		if (pte_user_exec(__ptep_get(ptep)))
 			return huge_ptep_clear_flush(vma, addr, ptep);
 	}
-	return huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+	return huge_ptep_get_and_clear(vma->vm_mm, addr, ptep, psize);
 }
 
 void huge_ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep,
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index d21f67d67cf5..524d34a0e921 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -98,34 +98,23 @@ static void __init arch_reserve_crashkernel(void)
 {
 	unsigned long long low_size = 0;
 	unsigned long long crash_base, crash_size;
-	char *cmdline = boot_command_line;
 	bool high = false;
 	int ret;
 
 	if (!IS_ENABLED(CONFIG_CRASH_RESERVE))
 		return;
 
-	ret = parse_crashkernel(cmdline, memblock_phys_mem_size(),
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
 				&crash_size, &crash_base,
-				&low_size, &high);
+				&low_size, NULL, &high);
 	if (ret)
 		return;
 
-	reserve_crashkernel_generic(cmdline, crash_size, crash_base,
-				    low_size, high);
+	reserve_crashkernel_generic(crash_size, crash_base, low_size, high);
 }
 
 static phys_addr_t __init max_zone_phys(phys_addr_t zone_limit)
 {
-	/**
-	 * Information we get from firmware (e.g. DT dma-ranges) describe DMA
-	 * bus constraints. Devices using DMA might have their own limitations.
-	 * Some of them rely on DMA zone in low 32-bit memory. Keep low RAM
-	 * DMA zone on platforms that have RAM there.
-	 */
-	if (memblock_start_of_DRAM() < U32_MAX)
-		zone_limit = min(zone_limit, U32_MAX);
-
 	return min(zone_limit, memblock_end_of_DRAM() - 1) + 1;
 }
 
@@ -141,6 +130,14 @@ static void __init zone_sizes_init(void)
 	acpi_zone_dma_limit = acpi_iort_dma_get_max_cpu_address();
 	dt_zone_dma_limit = of_dma_get_max_cpu_address(NULL);
 	zone_dma_limit = min(dt_zone_dma_limit, acpi_zone_dma_limit);
+	/*
+	 * Information we get from firmware (e.g. DT dma-ranges) describe DMA
+	 * bus constraints. Devices using DMA might have their own limitations.
+	 * Some of them rely on DMA zone in low 32-bit memory. Keep low RAM
+	 * DMA zone on platforms that have RAM there.
+	 */
+	if (memblock_start_of_DRAM() < U32_MAX)
+		zone_dma_limit = min(zone_dma_limit, U32_MAX);
 	arm64_dma_phys_limit = max_zone_phys(zone_dma_limit);
 	max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit);
 #endif
@@ -246,7 +243,7 @@ void __init arm64_memblock_init(void)
 	 */
 	if (memory_limit != PHYS_ADDR_MAX) {
 		memblock_mem_limit_remove_map(memory_limit);
-		memblock_add(__pa_symbol(_text), (u64)(_end - _text));
+		memblock_add(__pa_symbol(_text), (resource_size_t)(_end - _text));
 	}
 
 	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && phys_initrd_size) {
@@ -255,8 +252,8 @@ void __init arm64_memblock_init(void)
 		 * initrd to become inaccessible via the linear mapping.
 		 * Otherwise, this is a no-op
 		 */
-		u64 base = phys_initrd_start & PAGE_MASK;
-		u64 size = PAGE_ALIGN(phys_initrd_start + phys_initrd_size) - base;
+		phys_addr_t base = phys_initrd_start & PAGE_MASK;
+		resource_size_t size = PAGE_ALIGN(phys_initrd_start + phys_initrd_size) - base;
 
 		/*
 		 * We can only add back the initrd memory if we don't end up
@@ -278,31 +275,11 @@ void __init arm64_memblock_init(void)
 		}
 	}
 
-	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
-		extern u16 memstart_offset_seed;
-		u64 mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
-		int parange = cpuid_feature_extract_unsigned_field(
-					mmfr0, ID_AA64MMFR0_EL1_PARANGE_SHIFT);
-		s64 range = linear_region_size -
-			    BIT(id_aa64mmfr0_parange_to_phys_shift(parange));
-
-		/*
-		 * If the size of the linear region exceeds, by a sufficient
-		 * margin, the size of the region that the physical memory can
-		 * span, randomize the linear region as well.
-		 */
-		if (memstart_offset_seed > 0 && range >= (s64)ARM64_MEMSTART_ALIGN) {
-			range /= ARM64_MEMSTART_ALIGN;
-			memstart_addr -= ARM64_MEMSTART_ALIGN *
-					 ((range * memstart_offset_seed) >> 16);
-		}
-	}
-
 	/*
 	 * Register the kernel text, kernel data, initrd, and initial
 	 * pagetables with memblock.
 	 */
-	memblock_reserve(__pa_symbol(_stext), _end - _stext);
+	memblock_reserve(__pa_symbol(_text), _end - _text);
 	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && phys_initrd_size) {
 		/* the generic initrd code expects virtual addresses */
 		initrd_start = __phys_to_virt(phys_initrd_start);
@@ -310,8 +287,6 @@ void __init arm64_memblock_init(void)
 	}
 
 	early_init_fdt_scan_reserved_mem();
-
-	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
 }
 
 void __init bootmem_init(void)
@@ -360,12 +335,7 @@ void __init bootmem_init(void)
 	memblock_dump_all();
 }
 
-/*
- * mem_init() marks the free areas in the mem_map and tells us how much memory
- * is free.  This is done after various parts of the system have claimed their
- * memory after the kernel image.
- */
-void __init mem_init(void)
+void __init arch_mm_preinit(void)
 {
 	unsigned int flags = SWIOTLB_VERBOSE;
 	bool swiotlb = max_pfn > PFN_DOWN(arm64_dma_phys_limit);
@@ -389,9 +359,6 @@ void __init mem_init(void)
 	swiotlb_init(swiotlb, flags);
 	swiotlb_update_mem_attributes();
 
-	/* this will put all unused low memory onto the freelists */
-	memblock_free_all();
-
 	/*
 	 * Check boundaries twice: Some fundamental inconsistencies can be
 	 * detected at build time already.
diff --git a/arch/arm64/mm/ioremap.c b/arch/arm64/mm/ioremap.c
index 6cc0b7e7eb03..10e246f11271 100644
--- a/arch/arm64/mm/ioremap.c
+++ b/arch/arm64/mm/ioremap.c
@@ -15,10 +15,9 @@ int arm64_ioremap_prot_hook_register(ioremap_prot_hook_t hook)
 }
 
 void __iomem *ioremap_prot(phys_addr_t phys_addr, size_t size,
-			   unsigned long prot)
+			   pgprot_t pgprot)
 {
 	unsigned long last_addr = phys_addr + size - 1;
-	pgprot_t pgprot = __pgprot(prot);
 
 	/* Don't allow outside PHYS_MASK */
 	if (last_addr & ~PHYS_MASK)
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
index b65a29440a0c..abeb81bf6ebd 100644
--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@@ -190,7 +190,7 @@ static void __init kasan_pgd_populate(unsigned long addr, unsigned long end,
  */
 static bool __init root_level_aligned(u64 addr)
 {
-	int shift = (ARM64_HW_PGTABLE_LEVELS(vabits_actual) - 1) * (PAGE_SHIFT - 3);
+	int shift = (ARM64_HW_PGTABLE_LEVELS(vabits_actual) - 1) * PTDESC_TABLE_SHIFT;
 
 	return (addr % (PAGE_SIZE << shift)) == 0;
 }
@@ -245,7 +245,7 @@ static int __init root_level_idx(u64 addr)
 	 */
 	u64 vabits = IS_ENABLED(CONFIG_ARM64_64K_PAGES) ? VA_BITS
 							: vabits_actual;
-	int shift = (ARM64_HW_PGTABLE_LEVELS(vabits) - 1) * (PAGE_SHIFT - 3);
+	int shift = (ARM64_HW_PGTABLE_LEVELS(vabits) - 1) * PTDESC_TABLE_SHIFT;
 
 	return (addr & ~_PAGE_OFFSET(vabits)) >> (shift + PAGE_SHIFT);
 }
@@ -269,7 +269,7 @@ static void __init clone_next_level(u64 addr, pgd_t *tmp_pg_dir, pud_t *pud)
  */
 static int __init next_level_idx(u64 addr)
 {
-	int shift = (ARM64_HW_PGTABLE_LEVELS(vabits_actual) - 2) * (PAGE_SHIFT - 3);
+	int shift = (ARM64_HW_PGTABLE_LEVELS(vabits_actual) - 2) * PTDESC_TABLE_SHIFT;
 
 	return (addr >> (shift + PAGE_SHIFT)) % PTRS_PER_PTE;
 }
@@ -399,14 +399,12 @@ void __init kasan_init(void)
 {
 	kasan_init_shadow();
 	kasan_init_depth();
-#if defined(CONFIG_KASAN_GENERIC)
+	kasan_init_generic();
 	/*
 	 * Generic KASAN is now fully initialized.
 	 * Software and Hardware Tag-Based modes still require
 	 * kasan_init_sw_tags() and kasan_init_hw_tags() correspondingly.
 	 */
-	pr_info("KernelAddressSanitizer initialized (generic)\n");
-#endif
 }
 
 #endif /* CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS */
diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c
index 07aeab8a7606..08ee177432c2 100644
--- a/arch/arm64/mm/mmap.c
+++ b/arch/arm64/mm/mmap.c
@@ -81,9 +81,9 @@ static int __init adjust_protection_map(void)
 }
 arch_initcall(adjust_protection_map);
 
-pgprot_t vm_get_page_prot(unsigned long vm_flags)
+pgprot_t vm_get_page_prot(vm_flags_t vm_flags)
 {
-	pteval_t prot;
+	ptdesc_t prot;
 
 	/* Short circuit GCS to avoid bloating the table. */
 	if (system_supports_gcs() && (vm_flags & VM_SHADOW_STACK)) {
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index e2739b69e11b..9ae7ce00a7ef 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -26,6 +26,9 @@
 #include <linux/set_memory.h>
 #include <linux/kfence.h>
 #include <linux/pkeys.h>
+#include <linux/mm_inline.h>
+#include <linux/pagewalk.h>
+#include <linux/stop_machine.h>
 
 #include <asm/barrier.h>
 #include <asm/cputype.h>
@@ -46,6 +49,8 @@
 #define NO_CONT_MAPPINGS	BIT(1)
 #define NO_EXEC_MAPPINGS	BIT(2)	/* assumes FEAT_HPDS is not used */
 
+DEFINE_STATIC_KEY_FALSE(arm64_ptdump_lock_key);
+
 u64 kimage_voffset __ro_after_init;
 EXPORT_SYMBOL(kimage_voffset);
 
@@ -107,7 +112,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 }
 EXPORT_SYMBOL(phys_mem_access_prot);
 
-static phys_addr_t __init early_pgtable_alloc(int shift)
+static phys_addr_t __init early_pgtable_alloc(enum pgtable_type pgtable_type)
 {
 	phys_addr_t phys;
 
@@ -189,11 +194,11 @@ static void init_pte(pte_t *ptep, unsigned long addr, unsigned long end,
 	} while (ptep++, addr += PAGE_SIZE, addr != end);
 }
 
-static void alloc_init_cont_pte(pmd_t *pmdp, unsigned long addr,
-				unsigned long end, phys_addr_t phys,
-				pgprot_t prot,
-				phys_addr_t (*pgtable_alloc)(int),
-				int flags)
+static int alloc_init_cont_pte(pmd_t *pmdp, unsigned long addr,
+			       unsigned long end, phys_addr_t phys,
+			       pgprot_t prot,
+			       phys_addr_t (*pgtable_alloc)(enum pgtable_type),
+			       int flags)
 {
 	unsigned long next;
 	pmd_t pmd = READ_ONCE(*pmdp);
@@ -207,7 +212,9 @@ static void alloc_init_cont_pte(pmd_t *pmdp, unsigned long addr,
 		if (flags & NO_EXEC_MAPPINGS)
 			pmdval |= PMD_TABLE_PXN;
 		BUG_ON(!pgtable_alloc);
-		pte_phys = pgtable_alloc(PAGE_SHIFT);
+		pte_phys = pgtable_alloc(TABLE_PTE);
+		if (pte_phys == INVALID_PHYS_ADDR)
+			return -ENOMEM;
 		ptep = pte_set_fixmap(pte_phys);
 		init_clear_pgtable(ptep);
 		ptep += pte_index(addr);
@@ -239,11 +246,13 @@ static void alloc_init_cont_pte(pmd_t *pmdp, unsigned long addr,
 	 * walker.
 	 */
 	pte_clear_fixmap();
+
+	return 0;
 }
 
-static void init_pmd(pmd_t *pmdp, unsigned long addr, unsigned long end,
-		     phys_addr_t phys, pgprot_t prot,
-		     phys_addr_t (*pgtable_alloc)(int), int flags)
+static int init_pmd(pmd_t *pmdp, unsigned long addr, unsigned long end,
+		    phys_addr_t phys, pgprot_t prot,
+		    phys_addr_t (*pgtable_alloc)(enum pgtable_type), int flags)
 {
 	unsigned long next;
 
@@ -264,21 +273,29 @@ static void init_pmd(pmd_t *pmdp, unsigned long addr, unsigned long end,
 			BUG_ON(!pgattr_change_is_safe(pmd_val(old_pmd),
 						      READ_ONCE(pmd_val(*pmdp))));
 		} else {
-			alloc_init_cont_pte(pmdp, addr, next, phys, prot,
-					    pgtable_alloc, flags);
+			int ret;
+
+			ret = alloc_init_cont_pte(pmdp, addr, next, phys, prot,
+						  pgtable_alloc, flags);
+			if (ret)
+				return ret;
 
 			BUG_ON(pmd_val(old_pmd) != 0 &&
 			       pmd_val(old_pmd) != READ_ONCE(pmd_val(*pmdp)));
 		}
 		phys += next - addr;
 	} while (pmdp++, addr = next, addr != end);
+
+	return 0;
 }
 
-static void alloc_init_cont_pmd(pud_t *pudp, unsigned long addr,
-				unsigned long end, phys_addr_t phys,
-				pgprot_t prot,
-				phys_addr_t (*pgtable_alloc)(int), int flags)
+static int alloc_init_cont_pmd(pud_t *pudp, unsigned long addr,
+			       unsigned long end, phys_addr_t phys,
+			       pgprot_t prot,
+			       phys_addr_t (*pgtable_alloc)(enum pgtable_type),
+			       int flags)
 {
+	int ret;
 	unsigned long next;
 	pud_t pud = READ_ONCE(*pudp);
 	pmd_t *pmdp;
@@ -294,7 +311,9 @@ static void alloc_init_cont_pmd(pud_t *pudp, unsigned long addr,
 		if (flags & NO_EXEC_MAPPINGS)
 			pudval |= PUD_TABLE_PXN;
 		BUG_ON(!pgtable_alloc);
-		pmd_phys = pgtable_alloc(PMD_SHIFT);
+		pmd_phys = pgtable_alloc(TABLE_PMD);
+		if (pmd_phys == INVALID_PHYS_ADDR)
+			return -ENOMEM;
 		pmdp = pmd_set_fixmap(pmd_phys);
 		init_clear_pgtable(pmdp);
 		pmdp += pmd_index(addr);
@@ -314,20 +333,26 @@ static void alloc_init_cont_pmd(pud_t *pudp, unsigned long addr,
 		    (flags & NO_CONT_MAPPINGS) == 0)
 			__prot = __pgprot(pgprot_val(prot) | PTE_CONT);
 
-		init_pmd(pmdp, addr, next, phys, __prot, pgtable_alloc, flags);
+		ret = init_pmd(pmdp, addr, next, phys, __prot, pgtable_alloc, flags);
+		if (ret)
+			goto out;
 
 		pmdp += pmd_index(next) - pmd_index(addr);
 		phys += next - addr;
 	} while (addr = next, addr != end);
 
+out:
 	pmd_clear_fixmap();
+
+	return ret;
 }
 
-static void alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
-			   phys_addr_t phys, pgprot_t prot,
-			   phys_addr_t (*pgtable_alloc)(int),
-			   int flags)
+static int alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
+			  phys_addr_t phys, pgprot_t prot,
+			  phys_addr_t (*pgtable_alloc)(enum pgtable_type),
+			  int flags)
 {
+	int ret = 0;
 	unsigned long next;
 	p4d_t p4d = READ_ONCE(*p4dp);
 	pud_t *pudp;
@@ -339,7 +364,9 @@ static void alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
 		if (flags & NO_EXEC_MAPPINGS)
 			p4dval |= P4D_TABLE_PXN;
 		BUG_ON(!pgtable_alloc);
-		pud_phys = pgtable_alloc(PUD_SHIFT);
+		pud_phys = pgtable_alloc(TABLE_PUD);
+		if (pud_phys == INVALID_PHYS_ADDR)
+			return -ENOMEM;
 		pudp = pud_set_fixmap(pud_phys);
 		init_clear_pgtable(pudp);
 		pudp += pud_index(addr);
@@ -369,8 +396,10 @@ static void alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
 			BUG_ON(!pgattr_change_is_safe(pud_val(old_pud),
 						      READ_ONCE(pud_val(*pudp))));
 		} else {
-			alloc_init_cont_pmd(pudp, addr, next, phys, prot,
-					    pgtable_alloc, flags);
+			ret = alloc_init_cont_pmd(pudp, addr, next, phys, prot,
+						  pgtable_alloc, flags);
+			if (ret)
+				goto out;
 
 			BUG_ON(pud_val(old_pud) != 0 &&
 			       pud_val(old_pud) != READ_ONCE(pud_val(*pudp)));
@@ -378,14 +407,18 @@ static void alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
 		phys += next - addr;
 	} while (pudp++, addr = next, addr != end);
 
+out:
 	pud_clear_fixmap();
+
+	return ret;
 }
 
-static void alloc_init_p4d(pgd_t *pgdp, unsigned long addr, unsigned long end,
-			   phys_addr_t phys, pgprot_t prot,
-			   phys_addr_t (*pgtable_alloc)(int),
-			   int flags)
+static int alloc_init_p4d(pgd_t *pgdp, unsigned long addr, unsigned long end,
+			  phys_addr_t phys, pgprot_t prot,
+			  phys_addr_t (*pgtable_alloc)(enum pgtable_type),
+			  int flags)
 {
+	int ret;
 	unsigned long next;
 	pgd_t pgd = READ_ONCE(*pgdp);
 	p4d_t *p4dp;
@@ -397,7 +430,9 @@ static void alloc_init_p4d(pgd_t *pgdp, unsigned long addr, unsigned long end,
 		if (flags & NO_EXEC_MAPPINGS)
 			pgdval |= PGD_TABLE_PXN;
 		BUG_ON(!pgtable_alloc);
-		p4d_phys = pgtable_alloc(P4D_SHIFT);
+		p4d_phys = pgtable_alloc(TABLE_P4D);
+		if (p4d_phys == INVALID_PHYS_ADDR)
+			return -ENOMEM;
 		p4dp = p4d_set_fixmap(p4d_phys);
 		init_clear_pgtable(p4dp);
 		p4dp += p4d_index(addr);
@@ -412,8 +447,10 @@ static void alloc_init_p4d(pgd_t *pgdp, unsigned long addr, unsigned long end,
 
 		next = p4d_addr_end(addr, end);
 
-		alloc_init_pud(p4dp, addr, next, phys, prot,
-			       pgtable_alloc, flags);
+		ret = alloc_init_pud(p4dp, addr, next, phys, prot,
+				     pgtable_alloc, flags);
+		if (ret)
+			goto out;
 
 		BUG_ON(p4d_val(old_p4d) != 0 &&
 		       p4d_val(old_p4d) != READ_ONCE(p4d_val(*p4dp)));
@@ -421,15 +458,19 @@ static void alloc_init_p4d(pgd_t *pgdp, unsigned long addr, unsigned long end,
 		phys += next - addr;
 	} while (p4dp++, addr = next, addr != end);
 
+out:
 	p4d_clear_fixmap();
+
+	return ret;
 }
 
-static void __create_pgd_mapping_locked(pgd_t *pgdir, phys_addr_t phys,
-					unsigned long virt, phys_addr_t size,
-					pgprot_t prot,
-					phys_addr_t (*pgtable_alloc)(int),
-					int flags)
+static int __create_pgd_mapping_locked(pgd_t *pgdir, phys_addr_t phys,
+				       unsigned long virt, phys_addr_t size,
+				       pgprot_t prot,
+				       phys_addr_t (*pgtable_alloc)(enum pgtable_type),
+				       int flags)
 {
+	int ret;
 	unsigned long addr, end, next;
 	pgd_t *pgdp = pgd_offset_pgd(pgdir, virt);
 
@@ -438,7 +479,7 @@ static void __create_pgd_mapping_locked(pgd_t *pgdir, phys_addr_t phys,
 	 * within a page, we cannot map the region as the caller expects.
 	 */
 	if (WARN_ON((phys ^ virt) & ~PAGE_MASK))
-		return;
+		return -EINVAL;
 
 	phys &= PAGE_MASK;
 	addr = virt & PAGE_MASK;
@@ -446,59 +487,486 @@ static void __create_pgd_mapping_locked(pgd_t *pgdir, phys_addr_t phys,
 
 	do {
 		next = pgd_addr_end(addr, end);
-		alloc_init_p4d(pgdp, addr, next, phys, prot, pgtable_alloc,
-			       flags);
+		ret = alloc_init_p4d(pgdp, addr, next, phys, prot, pgtable_alloc,
+				     flags);
+		if (ret)
+			return ret;
 		phys += next - addr;
 	} while (pgdp++, addr = next, addr != end);
+
+	return 0;
 }
 
-static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
-				 unsigned long virt, phys_addr_t size,
-				 pgprot_t prot,
-				 phys_addr_t (*pgtable_alloc)(int),
-				 int flags)
+static int __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
+				unsigned long virt, phys_addr_t size,
+				pgprot_t prot,
+				phys_addr_t (*pgtable_alloc)(enum pgtable_type),
+				int flags)
 {
+	int ret;
+
 	mutex_lock(&fixmap_lock);
-	__create_pgd_mapping_locked(pgdir, phys, virt, size, prot,
-				    pgtable_alloc, flags);
+	ret = __create_pgd_mapping_locked(pgdir, phys, virt, size, prot,
+					  pgtable_alloc, flags);
 	mutex_unlock(&fixmap_lock);
+
+	return ret;
 }
 
-#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-extern __alias(__create_pgd_mapping_locked)
-void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt,
-			     phys_addr_t size, pgprot_t prot,
-			     phys_addr_t (*pgtable_alloc)(int), int flags);
-#endif
+static void early_create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
+				     unsigned long virt, phys_addr_t size,
+				     pgprot_t prot,
+				     phys_addr_t (*pgtable_alloc)(enum pgtable_type),
+				     int flags)
+{
+	int ret;
+
+	ret = __create_pgd_mapping(pgdir, phys, virt, size, prot, pgtable_alloc,
+				   flags);
+	if (ret)
+		panic("Failed to create page tables\n");
+}
 
-static phys_addr_t __pgd_pgtable_alloc(int shift)
+static phys_addr_t __pgd_pgtable_alloc(struct mm_struct *mm, gfp_t gfp,
+				       enum pgtable_type pgtable_type)
 {
 	/* Page is zeroed by init_clear_pgtable() so don't duplicate effort. */
-	void *ptr = (void *)__get_free_page(GFP_PGTABLE_KERNEL & ~__GFP_ZERO);
+	struct ptdesc *ptdesc = pagetable_alloc(gfp & ~__GFP_ZERO, 0);
+	phys_addr_t pa;
+
+	if (!ptdesc)
+		return INVALID_PHYS_ADDR;
+
+	pa = page_to_phys(ptdesc_page(ptdesc));
+
+	switch (pgtable_type) {
+	case TABLE_PTE:
+		BUG_ON(!pagetable_pte_ctor(mm, ptdesc));
+		break;
+	case TABLE_PMD:
+		BUG_ON(!pagetable_pmd_ctor(mm, ptdesc));
+		break;
+	case TABLE_PUD:
+		pagetable_pud_ctor(ptdesc);
+		break;
+	case TABLE_P4D:
+		pagetable_p4d_ctor(ptdesc);
+		break;
+	}
+
+	return pa;
+}
+
+static phys_addr_t
+pgd_pgtable_alloc_init_mm_gfp(enum pgtable_type pgtable_type, gfp_t gfp)
+{
+	return __pgd_pgtable_alloc(&init_mm, gfp, pgtable_type);
+}
 
-	BUG_ON(!ptr);
-	return __pa(ptr);
+static phys_addr_t __maybe_unused
+pgd_pgtable_alloc_init_mm(enum pgtable_type pgtable_type)
+{
+	return pgd_pgtable_alloc_init_mm_gfp(pgtable_type, GFP_PGTABLE_KERNEL);
+}
+
+static phys_addr_t
+pgd_pgtable_alloc_special_mm(enum pgtable_type pgtable_type)
+{
+	return  __pgd_pgtable_alloc(NULL, GFP_PGTABLE_KERNEL, pgtable_type);
 }
 
-static phys_addr_t pgd_pgtable_alloc(int shift)
+static void split_contpte(pte_t *ptep)
 {
-	phys_addr_t pa = __pgd_pgtable_alloc(shift);
-	struct ptdesc *ptdesc = page_ptdesc(phys_to_page(pa));
+	int i;
+
+	ptep = PTR_ALIGN_DOWN(ptep, sizeof(*ptep) * CONT_PTES);
+	for (i = 0; i < CONT_PTES; i++, ptep++)
+		__set_pte(ptep, pte_mknoncont(__ptep_get(ptep)));
+}
+
+static int split_pmd(pmd_t *pmdp, pmd_t pmd, gfp_t gfp, bool to_cont)
+{
+	pmdval_t tableprot = PMD_TYPE_TABLE | PMD_TABLE_UXN | PMD_TABLE_AF;
+	unsigned long pfn = pmd_pfn(pmd);
+	pgprot_t prot = pmd_pgprot(pmd);
+	phys_addr_t pte_phys;
+	pte_t *ptep;
+	int i;
+
+	pte_phys = pgd_pgtable_alloc_init_mm_gfp(TABLE_PTE, gfp);
+	if (pte_phys == INVALID_PHYS_ADDR)
+		return -ENOMEM;
+	ptep = (pte_t *)phys_to_virt(pte_phys);
+
+	if (pgprot_val(prot) & PMD_SECT_PXN)
+		tableprot |= PMD_TABLE_PXN;
+
+	prot = __pgprot((pgprot_val(prot) & ~PTE_TYPE_MASK) | PTE_TYPE_PAGE);
+	prot = __pgprot(pgprot_val(prot) & ~PTE_CONT);
+	if (to_cont)
+		prot = __pgprot(pgprot_val(prot) | PTE_CONT);
+
+	for (i = 0; i < PTRS_PER_PTE; i++, ptep++, pfn++)
+		__set_pte(ptep, pfn_pte(pfn, prot));
 
 	/*
-	 * Call proper page table ctor in case later we need to
-	 * call core mm functions like apply_to_page_range() on
-	 * this pre-allocated page table.
+	 * Ensure the pte entries are visible to the table walker by the time
+	 * the pmd entry that points to the ptes is visible.
+	 */
+	dsb(ishst);
+	__pmd_populate(pmdp, pte_phys, tableprot);
+
+	return 0;
+}
+
+static void split_contpmd(pmd_t *pmdp)
+{
+	int i;
+
+	pmdp = PTR_ALIGN_DOWN(pmdp, sizeof(*pmdp) * CONT_PMDS);
+	for (i = 0; i < CONT_PMDS; i++, pmdp++)
+		set_pmd(pmdp, pmd_mknoncont(pmdp_get(pmdp)));
+}
+
+static int split_pud(pud_t *pudp, pud_t pud, gfp_t gfp, bool to_cont)
+{
+	pudval_t tableprot = PUD_TYPE_TABLE | PUD_TABLE_UXN | PUD_TABLE_AF;
+	unsigned int step = PMD_SIZE >> PAGE_SHIFT;
+	unsigned long pfn = pud_pfn(pud);
+	pgprot_t prot = pud_pgprot(pud);
+	phys_addr_t pmd_phys;
+	pmd_t *pmdp;
+	int i;
+
+	pmd_phys = pgd_pgtable_alloc_init_mm_gfp(TABLE_PMD, gfp);
+	if (pmd_phys == INVALID_PHYS_ADDR)
+		return -ENOMEM;
+	pmdp = (pmd_t *)phys_to_virt(pmd_phys);
+
+	if (pgprot_val(prot) & PMD_SECT_PXN)
+		tableprot |= PUD_TABLE_PXN;
+
+	prot = __pgprot((pgprot_val(prot) & ~PMD_TYPE_MASK) | PMD_TYPE_SECT);
+	prot = __pgprot(pgprot_val(prot) & ~PTE_CONT);
+	if (to_cont)
+		prot = __pgprot(pgprot_val(prot) | PTE_CONT);
+
+	for (i = 0; i < PTRS_PER_PMD; i++, pmdp++, pfn += step)
+		set_pmd(pmdp, pfn_pmd(pfn, prot));
+
+	/*
+	 * Ensure the pmd entries are visible to the table walker by the time
+	 * the pud entry that points to the pmds is visible.
+	 */
+	dsb(ishst);
+	__pud_populate(pudp, pmd_phys, tableprot);
+
+	return 0;
+}
+
+static int split_kernel_leaf_mapping_locked(unsigned long addr)
+{
+	pgd_t *pgdp, pgd;
+	p4d_t *p4dp, p4d;
+	pud_t *pudp, pud;
+	pmd_t *pmdp, pmd;
+	pte_t *ptep, pte;
+	int ret = 0;
+
+	/*
+	 * PGD: If addr is PGD aligned then addr already describes a leaf
+	 * boundary. If not present then there is nothing to split.
+	 */
+	if (ALIGN_DOWN(addr, PGDIR_SIZE) == addr)
+		goto out;
+	pgdp = pgd_offset_k(addr);
+	pgd = pgdp_get(pgdp);
+	if (!pgd_present(pgd))
+		goto out;
+
+	/*
+	 * P4D: If addr is P4D aligned then addr already describes a leaf
+	 * boundary. If not present then there is nothing to split.
+	 */
+	if (ALIGN_DOWN(addr, P4D_SIZE) == addr)
+		goto out;
+	p4dp = p4d_offset(pgdp, addr);
+	p4d = p4dp_get(p4dp);
+	if (!p4d_present(p4d))
+		goto out;
+
+	/*
+	 * PUD: If addr is PUD aligned then addr already describes a leaf
+	 * boundary. If not present then there is nothing to split. Otherwise,
+	 * if we have a pud leaf, split to contpmd.
+	 */
+	if (ALIGN_DOWN(addr, PUD_SIZE) == addr)
+		goto out;
+	pudp = pud_offset(p4dp, addr);
+	pud = pudp_get(pudp);
+	if (!pud_present(pud))
+		goto out;
+	if (pud_leaf(pud)) {
+		ret = split_pud(pudp, pud, GFP_PGTABLE_KERNEL, true);
+		if (ret)
+			goto out;
+	}
+
+	/*
+	 * CONTPMD: If addr is CONTPMD aligned then addr already describes a
+	 * leaf boundary. If not present then there is nothing to split.
+	 * Otherwise, if we have a contpmd leaf, split to pmd.
+	 */
+	if (ALIGN_DOWN(addr, CONT_PMD_SIZE) == addr)
+		goto out;
+	pmdp = pmd_offset(pudp, addr);
+	pmd = pmdp_get(pmdp);
+	if (!pmd_present(pmd))
+		goto out;
+	if (pmd_leaf(pmd)) {
+		if (pmd_cont(pmd))
+			split_contpmd(pmdp);
+		/*
+		 * PMD: If addr is PMD aligned then addr already describes a
+		 * leaf boundary. Otherwise, split to contpte.
+		 */
+		if (ALIGN_DOWN(addr, PMD_SIZE) == addr)
+			goto out;
+		ret = split_pmd(pmdp, pmd, GFP_PGTABLE_KERNEL, true);
+		if (ret)
+			goto out;
+	}
+
+	/*
+	 * CONTPTE: If addr is CONTPTE aligned then addr already describes a
+	 * leaf boundary. If not present then there is nothing to split.
+	 * Otherwise, if we have a contpte leaf, split to pte.
+	 */
+	if (ALIGN_DOWN(addr, CONT_PTE_SIZE) == addr)
+		goto out;
+	ptep = pte_offset_kernel(pmdp, addr);
+	pte = __ptep_get(ptep);
+	if (!pte_present(pte))
+		goto out;
+	if (pte_cont(pte))
+		split_contpte(ptep);
+
+out:
+	return ret;
+}
+
+static inline bool force_pte_mapping(void)
+{
+	const bool bbml2 = system_capabilities_finalized() ?
+		system_supports_bbml2_noabort() : cpu_supports_bbml2_noabort();
+
+	if (debug_pagealloc_enabled())
+		return true;
+	if (bbml2)
+		return false;
+	return rodata_full || arm64_kfence_can_set_direct_map() || is_realm_world();
+}
+
+static inline bool split_leaf_mapping_possible(void)
+{
+	/*
+	 * !BBML2_NOABORT systems should never run into scenarios where we would
+	 * have to split. So exit early and let calling code detect it and raise
+	 * a warning.
+	 */
+	if (!system_supports_bbml2_noabort())
+		return false;
+	return !force_pte_mapping();
+}
+
+static DEFINE_MUTEX(pgtable_split_lock);
+
+int split_kernel_leaf_mapping(unsigned long start, unsigned long end)
+{
+	int ret;
+
+	/*
+	 * Exit early if the region is within a pte-mapped area or if we can't
+	 * split. For the latter case, the permission change code will raise a
+	 * warning if not already pte-mapped.
+	 */
+	if (!split_leaf_mapping_possible() || is_kfence_address((void *)start))
+		return 0;
+
+	/*
+	 * Ensure start and end are at least page-aligned since this is the
+	 * finest granularity we can split to.
+	 */
+	if (start != PAGE_ALIGN(start) || end != PAGE_ALIGN(end))
+		return -EINVAL;
+
+	mutex_lock(&pgtable_split_lock);
+	arch_enter_lazy_mmu_mode();
+
+	/*
+	 * The split_kernel_leaf_mapping_locked() may sleep, it is not a
+	 * problem for ARM64 since ARM64's lazy MMU implementation allows
+	 * sleeping.
 	 *
-	 * We don't select ARCH_ENABLE_SPLIT_PMD_PTLOCK if pmd is
-	 * folded, and if so pagetable_pte_ctor() becomes nop.
+	 * Optimize for the common case of splitting out a single page from a
+	 * larger mapping. Here we can just split on the "least aligned" of
+	 * start and end and this will guarantee that there must also be a split
+	 * on the more aligned address since the both addresses must be in the
+	 * same contpte block and it must have been split to ptes.
+	 */
+	if (end - start == PAGE_SIZE) {
+		start = __ffs(start) < __ffs(end) ? start : end;
+		ret = split_kernel_leaf_mapping_locked(start);
+	} else {
+		ret = split_kernel_leaf_mapping_locked(start);
+		if (!ret)
+			ret = split_kernel_leaf_mapping_locked(end);
+	}
+
+	arch_leave_lazy_mmu_mode();
+	mutex_unlock(&pgtable_split_lock);
+	return ret;
+}
+
+static int split_to_ptes_pud_entry(pud_t *pudp, unsigned long addr,
+				   unsigned long next, struct mm_walk *walk)
+{
+	gfp_t gfp = *(gfp_t *)walk->private;
+	pud_t pud = pudp_get(pudp);
+	int ret = 0;
+
+	if (pud_leaf(pud))
+		ret = split_pud(pudp, pud, gfp, false);
+
+	return ret;
+}
+
+static int split_to_ptes_pmd_entry(pmd_t *pmdp, unsigned long addr,
+				   unsigned long next, struct mm_walk *walk)
+{
+	gfp_t gfp = *(gfp_t *)walk->private;
+	pmd_t pmd = pmdp_get(pmdp);
+	int ret = 0;
+
+	if (pmd_leaf(pmd)) {
+		if (pmd_cont(pmd))
+			split_contpmd(pmdp);
+		ret = split_pmd(pmdp, pmd, gfp, false);
+
+		/*
+		 * We have split the pmd directly to ptes so there is no need to
+		 * visit each pte to check if they are contpte.
+		 */
+		walk->action = ACTION_CONTINUE;
+	}
+
+	return ret;
+}
+
+static int split_to_ptes_pte_entry(pte_t *ptep, unsigned long addr,
+				   unsigned long next, struct mm_walk *walk)
+{
+	pte_t pte = __ptep_get(ptep);
+
+	if (pte_cont(pte))
+		split_contpte(ptep);
+
+	return 0;
+}
+
+static const struct mm_walk_ops split_to_ptes_ops = {
+	.pud_entry	= split_to_ptes_pud_entry,
+	.pmd_entry	= split_to_ptes_pmd_entry,
+	.pte_entry	= split_to_ptes_pte_entry,
+};
+
+static int range_split_to_ptes(unsigned long start, unsigned long end, gfp_t gfp)
+{
+	int ret;
+
+	arch_enter_lazy_mmu_mode();
+	ret = walk_kernel_page_table_range_lockless(start, end,
+					&split_to_ptes_ops, NULL, &gfp);
+	arch_leave_lazy_mmu_mode();
+
+	return ret;
+}
+
+static bool linear_map_requires_bbml2 __initdata;
+
+u32 idmap_kpti_bbml2_flag;
+
+static void __init init_idmap_kpti_bbml2_flag(void)
+{
+	WRITE_ONCE(idmap_kpti_bbml2_flag, 1);
+	/* Must be visible to other CPUs before stop_machine() is called. */
+	smp_mb();
+}
+
+static int __init linear_map_split_to_ptes(void *__unused)
+{
+	/*
+	 * Repainting the linear map must be done by CPU0 (the boot CPU) because
+	 * that's the only CPU that we know supports BBML2. The other CPUs will
+	 * be held in a waiting area with the idmap active.
 	 */
-	if (shift == PAGE_SHIFT)
-		BUG_ON(!pagetable_pte_ctor(ptdesc));
-	else if (shift == PMD_SHIFT)
-		BUG_ON(!pagetable_pmd_ctor(ptdesc));
+	if (!smp_processor_id()) {
+		unsigned long lstart = _PAGE_OFFSET(vabits_actual);
+		unsigned long lend = PAGE_END;
+		unsigned long kstart = (unsigned long)lm_alias(_stext);
+		unsigned long kend = (unsigned long)lm_alias(__init_begin);
+		int ret;
 
-	return pa;
+		/*
+		 * Wait for all secondary CPUs to be put into the waiting area.
+		 */
+		smp_cond_load_acquire(&idmap_kpti_bbml2_flag, VAL == num_online_cpus());
+
+		/*
+		 * Walk all of the linear map [lstart, lend), except the kernel
+		 * linear map alias [kstart, kend), and split all mappings to
+		 * PTE. The kernel alias remains static throughout runtime so
+		 * can continue to be safely mapped with large mappings.
+		 */
+		ret = range_split_to_ptes(lstart, kstart, GFP_ATOMIC);
+		if (!ret)
+			ret = range_split_to_ptes(kend, lend, GFP_ATOMIC);
+		if (ret)
+			panic("Failed to split linear map\n");
+		flush_tlb_kernel_range(lstart, lend);
+
+		/*
+		 * Relies on dsb in flush_tlb_kernel_range() to avoid reordering
+		 * before any page table split operations.
+		 */
+		WRITE_ONCE(idmap_kpti_bbml2_flag, 0);
+	} else {
+		typedef void (wait_split_fn)(void);
+		extern wait_split_fn wait_linear_map_split_to_ptes;
+		wait_split_fn *wait_fn;
+
+		wait_fn = (void *)__pa_symbol(wait_linear_map_split_to_ptes);
+
+		/*
+		 * At least one secondary CPU doesn't support BBML2 so cannot
+		 * tolerate the size of the live mappings changing. So have the
+		 * secondary CPUs wait for the boot CPU to make the changes
+		 * with the idmap active and init_mm inactive.
+		 */
+		cpu_install_idmap();
+		wait_fn();
+		cpu_uninstall_idmap();
+	}
+
+	return 0;
+}
+
+void __init linear_map_maybe_split_to_ptes(void)
+{
+	if (linear_map_requires_bbml2 && !system_supports_bbml2_noabort()) {
+		init_idmap_kpti_bbml2_flag();
+		stop_machine(linear_map_split_to_ptes, NULL, cpu_online_mask);
+	}
 }
 
 /*
@@ -514,8 +982,8 @@ void __init create_mapping_noalloc(phys_addr_t phys, unsigned long virt,
 			&phys, virt);
 		return;
 	}
-	__create_pgd_mapping(init_mm.pgd, phys, virt, size, prot, NULL,
-			     NO_CONT_MAPPINGS);
+	early_create_pgd_mapping(init_mm.pgd, phys, virt, size, prot, NULL,
+				 NO_CONT_MAPPINGS);
 }
 
 void __init create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
@@ -529,8 +997,8 @@ void __init create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
 	if (page_mappings_only)
 		flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
-	__create_pgd_mapping(mm->pgd, phys, virt, size, prot,
-			     pgd_pgtable_alloc, flags);
+	early_create_pgd_mapping(mm->pgd, phys, virt, size, prot,
+				 pgd_pgtable_alloc_special_mm, flags);
 }
 
 static void update_mapping_prot(phys_addr_t phys, unsigned long virt,
@@ -542,8 +1010,8 @@ static void update_mapping_prot(phys_addr_t phys, unsigned long virt,
 		return;
 	}
 
-	__create_pgd_mapping(init_mm.pgd, phys, virt, size, prot, NULL,
-			     NO_CONT_MAPPINGS);
+	early_create_pgd_mapping(init_mm.pgd, phys, virt, size, prot, NULL,
+				 NO_CONT_MAPPINGS);
 
 	/* flush the TLBs after updating live kernel mappings */
 	flush_tlb_kernel_range(virt, virt + size);
@@ -552,8 +1020,8 @@ static void update_mapping_prot(phys_addr_t phys, unsigned long virt,
 static void __init __map_memblock(pgd_t *pgdp, phys_addr_t start,
 				  phys_addr_t end, pgprot_t prot, int flags)
 {
-	__create_pgd_mapping(pgdp, start, __phys_to_virt(start), end - start,
-			     prot, early_pgtable_alloc, flags);
+	early_create_pgd_mapping(pgdp, start, __phys_to_virt(start), end - start,
+				 prot, early_pgtable_alloc, flags);
 }
 
 void __init mark_linear_text_alias_ro(void)
@@ -561,8 +1029,8 @@ void __init mark_linear_text_alias_ro(void)
 	/*
 	 * Remove the write permissions from the linear alias of .text/.rodata
 	 */
-	update_mapping_prot(__pa_symbol(_stext), (unsigned long)lm_alias(_stext),
-			    (unsigned long)__init_begin - (unsigned long)_stext,
+	update_mapping_prot(__pa_symbol(_text), (unsigned long)lm_alias(_text),
+			    (unsigned long)__init_begin - (unsigned long)_text,
 			    PAGE_KERNEL_RO);
 }
 
@@ -613,6 +1081,33 @@ static void __init arm64_kfence_map_pool(phys_addr_t kfence_pool, pgd_t *pgdp)
 	memblock_clear_nomap(kfence_pool, KFENCE_POOL_SIZE);
 	__kfence_pool = phys_to_virt(kfence_pool);
 }
+
+bool arch_kfence_init_pool(void)
+{
+	unsigned long start = (unsigned long)__kfence_pool;
+	unsigned long end = start + KFENCE_POOL_SIZE;
+	int ret;
+
+	/* Exit early if we know the linear map is already pte-mapped. */
+	if (!split_leaf_mapping_possible())
+		return true;
+
+	/* Kfence pool is already pte-mapped for the early init case. */
+	if (kfence_early_init)
+		return true;
+
+	mutex_lock(&pgtable_split_lock);
+	ret = range_split_to_ptes(start, end, GFP_PGTABLE_KERNEL);
+	mutex_unlock(&pgtable_split_lock);
+
+	/*
+	 * Since the system supports bbml2_noabort, tlb invalidation is not
+	 * required here; the pgtable mappings have been split to pte but larger
+	 * entries may safely linger in the TLB.
+	 */
+
+	return !ret;
+}
 #else /* CONFIG_KFENCE */
 
 static inline phys_addr_t arm64_kfence_alloc_pool(void) { return 0; }
@@ -623,7 +1118,7 @@ static inline void arm64_kfence_map_pool(phys_addr_t kfence_pool, pgd_t *pgdp) {
 static void __init map_mem(pgd_t *pgdp)
 {
 	static const u64 direct_map_end = _PAGE_END(VA_BITS_MIN);
-	phys_addr_t kernel_start = __pa_symbol(_stext);
+	phys_addr_t kernel_start = __pa_symbol(_text);
 	phys_addr_t kernel_end = __pa_symbol(__init_begin);
 	phys_addr_t start, end;
 	phys_addr_t early_kfence_pool;
@@ -645,7 +1140,9 @@ static void __init map_mem(pgd_t *pgdp)
 
 	early_kfence_pool = arm64_kfence_alloc_pool();
 
-	if (can_set_direct_map())
+	linear_map_requires_bbml2 = !force_pte_mapping() && can_set_direct_map();
+
+	if (force_pte_mapping())
 		flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
 	/*
@@ -670,7 +1167,7 @@ static void __init map_mem(pgd_t *pgdp)
 	}
 
 	/*
-	 * Map the linear alias of the [_stext, __init_begin) interval
+	 * Map the linear alias of the [_text, __init_begin) interval
 	 * as non-executable now, and remove the write permission in
 	 * mark_linear_text_alias_ro() below (which will be called after
 	 * alternative patching has completed). This makes the contents
@@ -697,6 +1194,10 @@ void mark_rodata_ro(void)
 	WRITE_ONCE(rodata_is_rw, false);
 	update_mapping_prot(__pa_symbol(__start_rodata), (unsigned long)__start_rodata,
 			    section_size, PAGE_KERNEL_RO);
+	/* mark the range between _text and _stext as read only. */
+	update_mapping_prot(__pa_symbol(_text), (unsigned long)_text,
+			    (unsigned long)_stext - (unsigned long)_text,
+			    PAGE_KERNEL_RO);
 }
 
 static void __init declare_vma(struct vm_struct *vma,
@@ -722,7 +1223,97 @@ static void __init declare_vma(struct vm_struct *vma,
 }
 
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-static pgprot_t kernel_exec_prot(void)
+#define KPTI_NG_TEMP_VA		(-(1UL << PMD_SHIFT))
+
+static phys_addr_t kpti_ng_temp_alloc __initdata;
+
+static phys_addr_t __init kpti_ng_pgd_alloc(enum pgtable_type type)
+{
+	kpti_ng_temp_alloc -= PAGE_SIZE;
+	return kpti_ng_temp_alloc;
+}
+
+static int __init __kpti_install_ng_mappings(void *__unused)
+{
+	typedef void (kpti_remap_fn)(int, int, phys_addr_t, unsigned long);
+	extern kpti_remap_fn idmap_kpti_install_ng_mappings;
+	kpti_remap_fn *remap_fn;
+
+	int cpu = smp_processor_id();
+	int levels = CONFIG_PGTABLE_LEVELS;
+	int order = order_base_2(levels);
+	u64 kpti_ng_temp_pgd_pa = 0;
+	pgd_t *kpti_ng_temp_pgd;
+	u64 alloc = 0;
+
+	if (levels == 5 && !pgtable_l5_enabled())
+		levels = 4;
+	else if (levels == 4 && !pgtable_l4_enabled())
+		levels = 3;
+
+	remap_fn = (void *)__pa_symbol(idmap_kpti_install_ng_mappings);
+
+	if (!cpu) {
+		int ret;
+
+		alloc = __get_free_pages(GFP_ATOMIC | __GFP_ZERO, order);
+		kpti_ng_temp_pgd = (pgd_t *)(alloc + (levels - 1) * PAGE_SIZE);
+		kpti_ng_temp_alloc = kpti_ng_temp_pgd_pa = __pa(kpti_ng_temp_pgd);
+
+		//
+		// Create a minimal page table hierarchy that permits us to map
+		// the swapper page tables temporarily as we traverse them.
+		//
+		// The physical pages are laid out as follows:
+		//
+		// +--------+-/-------+-/------ +-/------ +-\\\--------+
+		// :  PTE[] : | PMD[] : | PUD[] : | P4D[] : ||| PGD[]  :
+		// +--------+-\-------+-\------ +-\------ +-///--------+
+		//      ^
+		// The first page is mapped into this hierarchy at a PMD_SHIFT
+		// aligned virtual address, so that we can manipulate the PTE
+		// level entries while the mapping is active. The first entry
+		// covers the PTE[] page itself, the remaining entries are free
+		// to be used as a ad-hoc fixmap.
+		//
+		ret = __create_pgd_mapping_locked(kpti_ng_temp_pgd, __pa(alloc),
+						  KPTI_NG_TEMP_VA, PAGE_SIZE, PAGE_KERNEL,
+						  kpti_ng_pgd_alloc, 0);
+		if (ret)
+			panic("Failed to create page tables\n");
+	}
+
+	cpu_install_idmap();
+	remap_fn(cpu, num_online_cpus(), kpti_ng_temp_pgd_pa, KPTI_NG_TEMP_VA);
+	cpu_uninstall_idmap();
+
+	if (!cpu) {
+		free_pages(alloc, order);
+		arm64_use_ng_mappings = true;
+	}
+
+	return 0;
+}
+
+void __init kpti_install_ng_mappings(void)
+{
+	/* Check whether KPTI is going to be used */
+	if (!arm64_kernel_unmapped_at_el0())
+		return;
+
+	/*
+	 * We don't need to rewrite the page-tables if either we've done
+	 * it already or we have KASLR enabled and therefore have not
+	 * created any global mappings at all.
+	 */
+	if (arm64_use_ng_mappings)
+		return;
+
+	init_idmap_kpti_bbml2_flag();
+	stop_machine(__kpti_install_ng_mappings, NULL, cpu_online_mask);
+}
+
+static pgprot_t __init kernel_exec_prot(void)
 {
 	return rodata_enabled ? PAGE_KERNEL_ROX : PAGE_KERNEL_EXEC;
 }
@@ -742,9 +1333,9 @@ static int __init map_entry_trampoline(void)
 
 	/* Map only the text into the trampoline page table */
 	memset(tramp_pg_dir, 0, PGD_SIZE);
-	__create_pgd_mapping(tramp_pg_dir, pa_start, TRAMP_VALIAS,
-			     entry_tramp_text_size(), prot,
-			     __pgd_pgtable_alloc, NO_BLOCK_MAPPINGS);
+	early_create_pgd_mapping(tramp_pg_dir, pa_start, TRAMP_VALIAS,
+				 entry_tramp_text_size(), prot,
+				 pgd_pgtable_alloc_init_mm, NO_BLOCK_MAPPINGS);
 
 	/* Map both the text and data into the kernel page table */
 	for (i = 0; i < DIV_ROUND_UP(entry_tramp_text_size(), PAGE_SIZE); i++)
@@ -767,38 +1358,41 @@ static void __init declare_kernel_vmas(void)
 {
 	static struct vm_struct vmlinux_seg[KERNEL_SEGMENT_COUNT];
 
-	declare_vma(&vmlinux_seg[0], _stext, _etext, VM_NO_GUARD);
+	declare_vma(&vmlinux_seg[0], _text, _etext, VM_NO_GUARD);
 	declare_vma(&vmlinux_seg[1], __start_rodata, __inittext_begin, VM_NO_GUARD);
 	declare_vma(&vmlinux_seg[2], __inittext_begin, __inittext_end, VM_NO_GUARD);
 	declare_vma(&vmlinux_seg[3], __initdata_begin, __initdata_end, VM_NO_GUARD);
 	declare_vma(&vmlinux_seg[4], _data, _end, 0);
 }
 
-void __pi_map_range(u64 *pgd, u64 start, u64 end, u64 pa, pgprot_t prot,
-		    int level, pte_t *tbl, bool may_use_cont, u64 va_offset);
+void __pi_map_range(phys_addr_t *pte, u64 start, u64 end, phys_addr_t pa,
+		    pgprot_t prot, int level, pte_t *tbl, bool may_use_cont,
+		    u64 va_offset);
 
 static u8 idmap_ptes[IDMAP_LEVELS - 1][PAGE_SIZE] __aligned(PAGE_SIZE) __ro_after_init,
-	  kpti_ptes[IDMAP_LEVELS - 1][PAGE_SIZE] __aligned(PAGE_SIZE) __ro_after_init;
+	  kpti_bbml2_ptes[IDMAP_LEVELS - 1][PAGE_SIZE] __aligned(PAGE_SIZE) __ro_after_init;
 
 static void __init create_idmap(void)
 {
-	u64 start = __pa_symbol(__idmap_text_start);
-	u64 end   = __pa_symbol(__idmap_text_end);
-	u64 ptep  = __pa_symbol(idmap_ptes);
+	phys_addr_t start = __pa_symbol(__idmap_text_start);
+	phys_addr_t end   = __pa_symbol(__idmap_text_end);
+	phys_addr_t ptep  = __pa_symbol(idmap_ptes);
 
 	__pi_map_range(&ptep, start, end, start, PAGE_KERNEL_ROX,
 		       IDMAP_ROOT_LEVEL, (pte_t *)idmap_pg_dir, false,
 		       __phys_to_virt(ptep) - ptep);
 
-	if (IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0) && !arm64_use_ng_mappings) {
-		extern u32 __idmap_kpti_flag;
-		u64 pa = __pa_symbol(&__idmap_kpti_flag);
+	if (linear_map_requires_bbml2 ||
+	    (IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0) && !arm64_use_ng_mappings)) {
+		phys_addr_t pa = __pa_symbol(&idmap_kpti_bbml2_flag);
 
 		/*
 		 * The KPTI G-to-nG conversion code needs a read-write mapping
-		 * of its synchronization flag in the ID map.
+		 * of its synchronization flag in the ID map. This is also used
+		 * when splitting the linear map to ptes if a secondary CPU
+		 * doesn't support bbml2.
 		 */
-		ptep = __pa_symbol(kpti_ptes);
+		ptep = __pa_symbol(kpti_bbml2_ptes);
 		__pi_map_range(&ptep, pa, pa + sizeof(u32), pa, PAGE_KERNEL,
 			       IDMAP_ROOT_LEVEL, (pte_t *)idmap_pg_dir, false,
 			       __phys_to_virt(ptep) - ptep);
@@ -823,7 +1417,7 @@ static void free_hotplug_page_range(struct page *page, size_t size,
 		vmem_altmap_free(altmap, size >> PAGE_SHIFT);
 	} else {
 		WARN_ON(PageReserved(page));
-		free_pages((unsigned long)page_address(page), get_order(size));
+		__free_pages(page, get_order(size));
 	}
 }
 
@@ -1169,15 +1763,19 @@ int __meminit vmemmap_check_pmd(pmd_t *pmdp, int node,
 				unsigned long addr, unsigned long next)
 {
 	vmemmap_verify((pte_t *)pmdp, node, addr, next);
-	return 1;
+
+	return pmd_sect(READ_ONCE(*pmdp));
 }
 
 int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
 		struct vmem_altmap *altmap)
 {
 	WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END));
+	/* [start, end] should be within one section */
+	WARN_ON_ONCE(end - start > PAGES_PER_SECTION * sizeof(struct page));
 
-	if (!IS_ENABLED(CONFIG_ARM64_4K_PAGES))
+	if (!IS_ENABLED(CONFIG_ARM64_4K_PAGES) ||
+	    (end - start < PAGES_PER_SECTION * sizeof(struct page)))
 		return vmemmap_populate_basepages(start, end, node, altmap);
 	else
 		return vmemmap_populate_hugepages(start, end, node, altmap);
@@ -1244,7 +1842,8 @@ int pmd_clear_huge(pmd_t *pmdp)
 	return 1;
 }
 
-int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
+static int __pmd_free_pte_page(pmd_t *pmdp, unsigned long addr,
+			       bool acquire_mmap_lock)
 {
 	pte_t *table;
 	pmd_t pmd;
@@ -1256,13 +1855,25 @@ int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
 		return 1;
 	}
 
+	/* See comment in pud_free_pmd_page for static key logic */
 	table = pte_offset_kernel(pmdp, addr);
 	pmd_clear(pmdp);
 	__flush_tlb_kernel_pgtable(addr);
+	if (static_branch_unlikely(&arm64_ptdump_lock_key) && acquire_mmap_lock) {
+		mmap_read_lock(&init_mm);
+		mmap_read_unlock(&init_mm);
+	}
+
 	pte_free_kernel(NULL, table);
 	return 1;
 }
 
+int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
+{
+	/* If ptdump is walking the pagetables, acquire init_mm.mmap_lock */
+	return __pmd_free_pte_page(pmdp, addr, /* acquire_mmap_lock = */ true);
+}
+
 int pud_free_pmd_page(pud_t *pudp, unsigned long addr)
 {
 	pmd_t *table;
@@ -1278,15 +1889,36 @@ int pud_free_pmd_page(pud_t *pudp, unsigned long addr)
 	}
 
 	table = pmd_offset(pudp, addr);
+
+	/*
+	 * Our objective is to prevent ptdump from reading a PMD table which has
+	 * been freed. In this race, if pud_free_pmd_page observes the key on
+	 * (which got flipped by ptdump) then the mmap lock sequence here will,
+	 * as a result of the mmap write lock/unlock sequence in ptdump, give
+	 * us the correct synchronization. If not, this means that ptdump has
+	 * yet not started walking the pagetables - the sequence of barriers
+	 * issued by __flush_tlb_kernel_pgtable() guarantees that ptdump will
+	 * observe an empty PUD.
+	 */
+	pud_clear(pudp);
+	__flush_tlb_kernel_pgtable(addr);
+	if (static_branch_unlikely(&arm64_ptdump_lock_key)) {
+		mmap_read_lock(&init_mm);
+		mmap_read_unlock(&init_mm);
+	}
+
 	pmdp = table;
 	next = addr;
 	end = addr + PUD_SIZE;
 	do {
-		pmd_free_pte_page(pmdp, next);
+		if (pmd_present(pmdp_get(pmdp)))
+			/*
+			 * PMD has been isolated, so ptdump won't see it. No
+			 * need to acquire init_mm.mmap_lock.
+			 */
+			__pmd_free_pte_page(pmdp, next, /* acquire_mmap_lock = */ false);
 	} while (pmdp++, next += PMD_SIZE, next != end);
 
-	pud_clear(pudp);
-	__flush_tlb_kernel_pgtable(addr);
 	pmd_free(NULL, table);
 	return 1;
 }
@@ -1306,8 +1938,8 @@ static void __remove_pgd_mapping(pgd_t *pgdir, unsigned long start, u64 size)
 struct range arch_get_mappable_range(void)
 {
 	struct range mhp_range;
-	u64 start_linear_pa = __pa(_PAGE_OFFSET(vabits_actual));
-	u64 end_linear_pa = __pa(PAGE_END - 1);
+	phys_addr_t start_linear_pa = __pa(_PAGE_OFFSET(vabits_actual));
+	phys_addr_t end_linear_pa = __pa(PAGE_END - 1);
 
 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
 		/*
@@ -1342,25 +1974,31 @@ int arch_add_memory(int nid, u64 start, u64 size,
 
 	VM_BUG_ON(!mhp_range_allowed(start, size, true));
 
-	if (can_set_direct_map())
+	if (force_pte_mapping())
 		flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
-	__create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start),
-			     size, params->pgprot, __pgd_pgtable_alloc,
-			     flags);
+	ret = __create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start),
+				   size, params->pgprot, pgd_pgtable_alloc_init_mm,
+				   flags);
+	if (ret)
+		goto err;
 
 	memblock_clear_nomap(start, size);
 
 	ret = __add_pages(nid, start >> PAGE_SHIFT, size >> PAGE_SHIFT,
 			   params);
 	if (ret)
-		__remove_pgd_mapping(swapper_pg_dir,
-				     __phys_to_virt(start), size);
-	else {
-		max_pfn = PFN_UP(start + size);
-		max_low_pfn = max_pfn;
-	}
+		goto err;
+
+	/* Address of hotplugged memory can be smaller */
+	max_pfn = max(max_pfn, PFN_UP(start + size));
+	max_low_pfn = max_pfn;
 
+	return 0;
+
+err:
+	__remove_pgd_mapping(swapper_pg_dir,
+			     __phys_to_virt(start), size);
 	return ret;
 }
 
@@ -1499,24 +2137,41 @@ static int __init prevent_bootmem_remove_init(void)
 early_initcall(prevent_bootmem_remove_init);
 #endif
 
-pte_t ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+pte_t modify_prot_start_ptes(struct vm_area_struct *vma, unsigned long addr,
+			     pte_t *ptep, unsigned int nr)
 {
+	pte_t pte = get_and_clear_ptes(vma->vm_mm, addr, ptep, nr);
+
 	if (alternative_has_cap_unlikely(ARM64_WORKAROUND_2645198)) {
 		/*
 		 * Break-before-make (BBM) is required for all user space mappings
 		 * when the permission changes from executable to non-executable
 		 * in cases where cpu is affected with errata #2645198.
 		 */
-		if (pte_user_exec(ptep_get(ptep)))
-			return ptep_clear_flush(vma, addr, ptep);
+		if (pte_accessible(vma->vm_mm, pte) && pte_user_exec(pte))
+			__flush_tlb_range(vma, addr, nr * PAGE_SIZE,
+					  PAGE_SIZE, true, 3);
 	}
-	return ptep_get_and_clear(vma->vm_mm, addr, ptep);
+
+	return pte;
+}
+
+pte_t ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	return modify_prot_start_ptes(vma, addr, ptep, 1);
+}
+
+void modify_prot_commit_ptes(struct vm_area_struct *vma, unsigned long addr,
+			     pte_t *ptep, pte_t old_pte, pte_t pte,
+			     unsigned int nr)
+{
+	set_ptes(vma->vm_mm, addr, ptep, pte, nr);
 }
 
 void ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep,
 			     pte_t old_pte, pte_t pte)
 {
-	set_pte_at(vma->vm_mm, addr, ptep, pte);
+	modify_prot_commit_ptes(vma, addr, ptep, old_pte, pte, 1);
 }
 
 /*
@@ -1554,9 +2209,8 @@ void __cpu_replace_ttbr1(pgd_t *pgdp, bool cnp)
 #ifdef CONFIG_ARCH_HAS_PKEYS
 int arch_set_user_pkey_access(struct task_struct *tsk, int pkey, unsigned long init_val)
 {
-	u64 new_por = POE_RXW;
+	u64 new_por;
 	u64 old_por;
-	u64 pkey_shift;
 
 	if (!system_supports_poe())
 		return -ENOSPC;
@@ -1570,7 +2224,7 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey, unsigned long i
 		return -EINVAL;
 
 	/* Set the bits we need in POR:  */
-	new_por = POE_RXW;
+	new_por = POE_RWX;
 	if (init_val & PKEY_DISABLE_WRITE)
 		new_por &= ~POE_W;
 	if (init_val & PKEY_DISABLE_ACCESS)
@@ -1581,12 +2235,11 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey, unsigned long i
 		new_por &= ~POE_X;
 
 	/* Shift the bits in to the correct place in POR for pkey: */
-	pkey_shift = pkey * POR_BITS_PER_PKEY;
-	new_por <<= pkey_shift;
+	new_por = POR_ELx_PERM_PREP(pkey, new_por);
 
 	/* Get old POR and mask off any old bits in place: */
 	old_por = read_sysreg_s(SYS_POR_EL0);
-	old_por &= ~(POE_MASK << pkey_shift);
+	old_por &= ~(POE_MASK << POR_ELx_PERM_SHIFT(pkey));
 
 	/* Write old part along with new part: */
 	write_sysreg_s(old_por | new_por, SYS_POR_EL0);
diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
index 39fd1f7ff02a..f0e784b963e6 100644
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@@ -8,6 +8,7 @@
 #include <linux/mem_encrypt.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
+#include <linux/pagewalk.h>
 
 #include <asm/cacheflush.h>
 #include <asm/pgtable-prot.h>
@@ -20,7 +21,66 @@ struct page_change_data {
 	pgprot_t clear_mask;
 };
 
-bool rodata_full __ro_after_init = IS_ENABLED(CONFIG_RODATA_FULL_DEFAULT_ENABLED);
+static ptdesc_t set_pageattr_masks(ptdesc_t val, struct mm_walk *walk)
+{
+	struct page_change_data *masks = walk->private;
+
+	val &= ~(pgprot_val(masks->clear_mask));
+	val |= (pgprot_val(masks->set_mask));
+
+	return val;
+}
+
+static int pageattr_pud_entry(pud_t *pud, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	pud_t val = pudp_get(pud);
+
+	if (pud_sect(val)) {
+		if (WARN_ON_ONCE((next - addr) != PUD_SIZE))
+			return -EINVAL;
+		val = __pud(set_pageattr_masks(pud_val(val), walk));
+		set_pud(pud, val);
+		walk->action = ACTION_CONTINUE;
+	}
+
+	return 0;
+}
+
+static int pageattr_pmd_entry(pmd_t *pmd, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	pmd_t val = pmdp_get(pmd);
+
+	if (pmd_sect(val)) {
+		if (WARN_ON_ONCE((next - addr) != PMD_SIZE))
+			return -EINVAL;
+		val = __pmd(set_pageattr_masks(pmd_val(val), walk));
+		set_pmd(pmd, val);
+		walk->action = ACTION_CONTINUE;
+	}
+
+	return 0;
+}
+
+static int pageattr_pte_entry(pte_t *pte, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	pte_t val = __ptep_get(pte);
+
+	val = __pte(set_pageattr_masks(pte_val(val), walk));
+	__set_pte(pte, val);
+
+	return 0;
+}
+
+static const struct mm_walk_ops pageattr_ops = {
+	.pud_entry	= pageattr_pud_entry,
+	.pmd_entry	= pageattr_pmd_entry,
+	.pte_entry	= pageattr_pte_entry,
+};
+
+bool rodata_full __ro_after_init = true;
 
 bool can_set_direct_map(void)
 {
@@ -37,32 +97,39 @@ bool can_set_direct_map(void)
 		arm64_kfence_can_set_direct_map() || is_realm_world();
 }
 
-static int change_page_range(pte_t *ptep, unsigned long addr, void *data)
+static int update_range_prot(unsigned long start, unsigned long size,
+			     pgprot_t set_mask, pgprot_t clear_mask)
 {
-	struct page_change_data *cdata = data;
-	pte_t pte = __ptep_get(ptep);
+	struct page_change_data data;
+	int ret;
 
-	pte = clear_pte_bit(pte, cdata->clear_mask);
-	pte = set_pte_bit(pte, cdata->set_mask);
+	data.set_mask = set_mask;
+	data.clear_mask = clear_mask;
 
-	__set_pte(ptep, pte);
-	return 0;
+	ret = split_kernel_leaf_mapping(start, start + size);
+	if (WARN_ON_ONCE(ret))
+		return ret;
+
+	arch_enter_lazy_mmu_mode();
+
+	/*
+	 * The caller must ensure that the range we are operating on does not
+	 * partially overlap a block mapping, or a cont mapping. Any such case
+	 * must be eliminated by splitting the mapping.
+	 */
+	ret = walk_kernel_page_table_range_lockless(start, start + size,
+						    &pageattr_ops, NULL, &data);
+	arch_leave_lazy_mmu_mode();
+
+	return ret;
 }
 
-/*
- * This function assumes that the range is mapped with PAGE_SIZE pages.
- */
 static int __change_memory_common(unsigned long start, unsigned long size,
-				pgprot_t set_mask, pgprot_t clear_mask)
+				  pgprot_t set_mask, pgprot_t clear_mask)
 {
-	struct page_change_data data;
 	int ret;
 
-	data.set_mask = set_mask;
-	data.clear_mask = clear_mask;
-
-	ret = apply_to_page_range(&init_mm, start, size, change_page_range,
-					&data);
+	ret = update_range_prot(start, size, set_mask, clear_mask);
 
 	/*
 	 * If the memory is being made valid without changing any other bits
@@ -81,7 +148,7 @@ static int change_memory_common(unsigned long addr, int numpages,
 	unsigned long size = PAGE_SIZE * numpages;
 	unsigned long end = start + size;
 	struct vm_struct *area;
-	int i;
+	int ret;
 
 	if (!PAGE_ALIGNED(addr)) {
 		start &= PAGE_MASK;
@@ -96,8 +163,8 @@ static int change_memory_common(unsigned long addr, int numpages,
 	 * we are operating on does not result in such splitting.
 	 *
 	 * Let's restrict ourselves to mappings created by vmalloc (or vmap).
-	 * Those are guaranteed to consist entirely of page mappings, and
-	 * splitting is never needed.
+	 * Disallow VM_ALLOW_HUGE_VMAP mappings to guarantee that only page
+	 * mappings are updated and splitting is never needed.
 	 *
 	 * So check whether the [addr, addr + size) interval is entirely
 	 * covered by precisely one VM area that has the VM_ALLOC flag set.
@@ -105,7 +172,7 @@ static int change_memory_common(unsigned long addr, int numpages,
 	area = find_vm_area((void *)addr);
 	if (!area ||
 	    end > (unsigned long)kasan_reset_tag(area->addr) + area->size ||
-	    !(area->flags & VM_ALLOC))
+	    ((area->flags & (VM_ALLOC | VM_ALLOW_HUGE_VMAP)) != VM_ALLOC))
 		return -EINVAL;
 
 	if (!numpages)
@@ -117,9 +184,13 @@ static int change_memory_common(unsigned long addr, int numpages,
 	 */
 	if (rodata_full && (pgprot_val(set_mask) == PTE_RDONLY ||
 			    pgprot_val(clear_mask) == PTE_RDONLY)) {
-		for (i = 0; i < area->nr_pages; i++) {
-			__change_memory_common((u64)page_address(area->pages[i]),
-					       PAGE_SIZE, set_mask, clear_mask);
+		unsigned long idx = (start - (unsigned long)kasan_reset_tag(area->addr))
+				    >> PAGE_SHIFT;
+		for (; numpages; idx++, numpages--) {
+			ret = __change_memory_common((u64)page_address(area->pages[idx]),
+						     PAGE_SIZE, set_mask, clear_mask);
+			if (ret)
+				return ret;
 		}
 	}
 
@@ -174,32 +245,26 @@ int set_memory_valid(unsigned long addr, int numpages, int enable)
 
 int set_direct_map_invalid_noflush(struct page *page)
 {
-	struct page_change_data data = {
-		.set_mask = __pgprot(0),
-		.clear_mask = __pgprot(PTE_VALID),
-	};
+	pgprot_t clear_mask = __pgprot(PTE_VALID);
+	pgprot_t set_mask = __pgprot(0);
 
 	if (!can_set_direct_map())
 		return 0;
 
-	return apply_to_page_range(&init_mm,
-				   (unsigned long)page_address(page),
-				   PAGE_SIZE, change_page_range, &data);
+	return update_range_prot((unsigned long)page_address(page),
+				 PAGE_SIZE, set_mask, clear_mask);
 }
 
 int set_direct_map_default_noflush(struct page *page)
 {
-	struct page_change_data data = {
-		.set_mask = __pgprot(PTE_VALID | PTE_WRITE),
-		.clear_mask = __pgprot(PTE_RDONLY),
-	};
+	pgprot_t set_mask = __pgprot(PTE_VALID | PTE_WRITE);
+	pgprot_t clear_mask = __pgprot(PTE_RDONLY);
 
 	if (!can_set_direct_map())
 		return 0;
 
-	return apply_to_page_range(&init_mm,
-				   (unsigned long)page_address(page),
-				   PAGE_SIZE, change_page_range, &data);
+	return update_range_prot((unsigned long)page_address(page),
+				 PAGE_SIZE, set_mask, clear_mask);
 }
 
 static int __set_memory_enc_dec(unsigned long addr,
diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c
index 0c501cabc238..bf5110b91e2f 100644
--- a/arch/arm64/mm/pgd.c
+++ b/arch/arm64/mm/pgd.c
@@ -33,7 +33,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 	gfp_t gfp = GFP_PGTABLE_USER;
 
 	if (pgdir_is_page_size())
-		return (pgd_t *)__get_free_page(gfp);
+		return __pgd_alloc(mm, 0);
 	else
 		return kmem_cache_alloc(pgd_cache, gfp);
 }
@@ -41,7 +41,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
 	if (pgdir_is_page_size())
-		free_page((unsigned long)pgd);
+		__pgd_free(mm, pgd);
 	else
 		kmem_cache_free(pgd_cache, pgd);
 }
@@ -56,7 +56,7 @@ void __init pgtable_cache_init(void)
 	 * With 52-bit physical addresses, the architecture requires the
 	 * top-level table to be aligned to at least 64 bytes.
 	 */
-	BUILD_BUG_ON(PGD_SIZE < 64);
+	BUILD_BUG_ON(!IS_ALIGNED(PGD_SIZE, 64));
 #endif
 
 	/*
diff --git a/arch/arm64/mm/physaddr.c b/arch/arm64/mm/physaddr.c
index cde44c13dda1..7d94e09b01b3 100644
--- a/arch/arm64/mm/physaddr.c
+++ b/arch/arm64/mm/physaddr.c
@@ -10,7 +10,7 @@
 phys_addr_t __virt_to_phys(unsigned long x)
 {
 	WARN(!__is_lm_address(__tag_reset(x)),
-	     "virt_to_phys used for non-linear address: %pK (%pS)\n",
+	     "virt_to_phys used for non-linear address: %p (%pS)\n",
 	      (void *)x,
 	      (void *)x);
 
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index b8edc5765441..01e868116448 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -23,15 +23,18 @@
 #include <asm/sysreg.h>
 
 #ifdef CONFIG_ARM64_64K_PAGES
-#define TCR_TG_FLAGS	TCR_TG0_64K | TCR_TG1_64K
+#define TCR_TG_FLAGS	((TCR_EL1_TG0_64K << TCR_EL1_TG0_SHIFT) |\
+			 (TCR_EL1_TG1_64K << TCR_EL1_TG1_SHIFT))
 #elif defined(CONFIG_ARM64_16K_PAGES)
-#define TCR_TG_FLAGS	TCR_TG0_16K | TCR_TG1_16K
+#define TCR_TG_FLAGS	((TCR_EL1_TG0_16K << TCR_EL1_TG0_SHIFT) |\
+			 (TCR_EL1_TG1_16K << TCR_EL1_TG1_SHIFT))
 #else /* CONFIG_ARM64_4K_PAGES */
-#define TCR_TG_FLAGS	TCR_TG0_4K | TCR_TG1_4K
+#define TCR_TG_FLAGS	((TCR_EL1_TG0_4K << TCR_EL1_TG0_SHIFT) |\
+			 (TCR_EL1_TG1_4K << TCR_EL1_TG1_SHIFT))
 #endif
 
 #ifdef CONFIG_RANDOMIZE_BASE
-#define TCR_KASLR_FLAGS	TCR_NFD1
+#define TCR_KASLR_FLAGS	TCR_EL1_NFD1
 #else
 #define TCR_KASLR_FLAGS	0
 #endif
@@ -40,23 +43,30 @@
 #define TCR_CACHE_FLAGS	TCR_IRGN_WBWA | TCR_ORGN_WBWA
 
 #ifdef CONFIG_KASAN_SW_TAGS
-#define TCR_KASAN_SW_FLAGS TCR_TBI1 | TCR_TBID1
+#define TCR_KASAN_SW_FLAGS TCR_EL1_TBI1 | TCR_EL1_TBID1
 #else
 #define TCR_KASAN_SW_FLAGS 0
 #endif
 
 #ifdef CONFIG_KASAN_HW_TAGS
-#define TCR_MTE_FLAGS TCR_TCMA1 | TCR_TBI1 | TCR_TBID1
+#define TCR_MTE_FLAGS TCR_EL1_TCMA1 | TCR_EL1_TBI1 | TCR_EL1_TBID1
 #elif defined(CONFIG_ARM64_MTE)
 /*
  * The mte_zero_clear_page_tags() implementation uses DC GZVA, which relies on
  * TBI being enabled at EL1.
  */
-#define TCR_MTE_FLAGS TCR_TBI1 | TCR_TBID1
+#define TCR_MTE_FLAGS TCR_EL1_TBI1 | TCR_EL1_TBID1
 #else
 #define TCR_MTE_FLAGS 0
 #endif
 
+#define TCR_IRGN_WBWA	((TCR_EL1_IRGN0_WBWA << TCR_EL1_IRGN0_SHIFT) |\
+			 (TCR_EL1_IRGN1_WBWA << TCR_EL1_IRGN1_SHIFT))
+#define TCR_ORGN_WBWA	((TCR_EL1_ORGN0_WBWA << TCR_EL1_ORGN0_SHIFT) |\
+			 (TCR_EL1_ORGN1_WBWA << TCR_EL1_ORGN1_SHIFT))
+#define TCR_SHARED	((TCR_EL1_SH0_INNER << TCR_EL1_SH0_SHIFT) |\
+			 (TCR_EL1_SH1_INNER << TCR_EL1_SH1_SHIFT))
+
 /*
  * Default MAIR_EL1. MT_NORMAL_TAGGED is initially mapped as Normal memory and
  * changed during mte_cpu_setup to Normal Tagged if the system supports MTE.
@@ -129,7 +139,7 @@ SYM_FUNC_START(cpu_do_resume)
 
 	/* Don't change t0sz here, mask those bits when restoring */
 	mrs	x7, tcr_el1
-	bfi	x8, x7, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH
+	bfi	x8, x7, TCR_EL1_T0SZ_SHIFT, TCR_EL1_T0SZ_WIDTH
 
 	msr	tcr_el1, x8
 	msr	vbar_el1, x9
@@ -245,10 +255,6 @@ SYM_FUNC_ALIAS(__pi_idmap_cpu_replace_ttbr1, idmap_cpu_replace_ttbr1)
  *
  * Called exactly once from stop_machine context by each CPU found during boot.
  */
-	.pushsection	".data", "aw", %progbits
-SYM_DATA(__idmap_kpti_flag, .long 1)
-	.popsection
-
 SYM_TYPED_FUNC_START(idmap_kpti_install_ng_mappings)
 	cpu		.req	w0
 	temp_pte	.req	x0
@@ -273,7 +279,7 @@ SYM_TYPED_FUNC_START(idmap_kpti_install_ng_mappings)
 
 	mov	x5, x3				// preserve temp_pte arg
 	mrs	swapper_ttb, ttbr1_el1
-	adr_l	flag_ptr, __idmap_kpti_flag
+	adr_l	flag_ptr, idmap_kpti_bbml2_flag
 
 	cbnz	cpu, __idmap_kpti_secondary
 
@@ -416,7 +422,25 @@ alternative_else_nop_endif
 __idmap_kpti_secondary:
 	/* Uninstall swapper before surgery begins */
 	__idmap_cpu_set_reserved_ttbr1 x16, x17
+	b scondary_cpu_wait
+
+	.unreq	swapper_ttb
+	.unreq	flag_ptr
+SYM_FUNC_END(idmap_kpti_install_ng_mappings)
+	.popsection
+#endif
+
+	.pushsection ".idmap.text", "a"
+SYM_TYPED_FUNC_START(wait_linear_map_split_to_ptes)
+	/* Must be same registers as in idmap_kpti_install_ng_mappings */
+	swapper_ttb	.req	x3
+	flag_ptr	.req	x4
+
+	mrs     swapper_ttb, ttbr1_el1
+	adr_l   flag_ptr, idmap_kpti_bbml2_flag
+	__idmap_cpu_set_reserved_ttbr1 x16, x17
 
+scondary_cpu_wait:
 	/* Increment the flag to let the boot CPU we're ready */
 1:	ldxr	w16, [flag_ptr]
 	add	w16, w16, #1
@@ -436,9 +460,8 @@ __idmap_kpti_secondary:
 
 	.unreq	swapper_ttb
 	.unreq	flag_ptr
-SYM_FUNC_END(idmap_kpti_install_ng_mappings)
+SYM_FUNC_END(wait_linear_map_split_to_ptes)
 	.popsection
-#endif
 
 /*
  *	__cpu_setup
@@ -454,7 +477,7 @@ SYM_FUNC_START(__cpu_setup)
 	dsb	nsh
 
 	msr	cpacr_el1, xzr			// Reset cpacr_el1
-	mov	x1, #1 << 12			// Reset mdscr_el1 and disable
+	mov	x1, MDSCR_EL1_TDCC		// Reset mdscr_el1 and disable
 	msr	mdscr_el1, x1			// access to the DCC from EL0
 	reset_pmuserenr_el0 x1			// Disable PMU access from EL0
 	reset_amuserenr_el0 x1			// Disable AMU access from EL0
@@ -468,8 +491,8 @@ SYM_FUNC_START(__cpu_setup)
 	tcr2	.req	x15
 	mov_q	mair, MAIR_EL1_SET
 	mov_q	tcr, TCR_T0SZ(IDMAP_VA_BITS) | TCR_T1SZ(VA_BITS_MIN) | TCR_CACHE_FLAGS | \
-		     TCR_SHARED | TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \
-		     TCR_TBI0 | TCR_A1 | TCR_KASAN_SW_FLAGS | TCR_MTE_FLAGS
+		     TCR_SHARED | TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_EL1_AS | \
+		     TCR_EL1_TBI0 | TCR_EL1_A1 | TCR_KASAN_SW_FLAGS | TCR_MTE_FLAGS
 	mov	tcr2, xzr
 
 	tcr_clear_errata_bits tcr, x9, x5
@@ -479,7 +502,7 @@ SYM_FUNC_START(__cpu_setup)
 alternative_if ARM64_HAS_VA52
 	tcr_set_t1sz	tcr, x9
 #ifdef CONFIG_ARM64_LPA2
-	orr		tcr, tcr, #TCR_DS
+	orr		tcr, tcr, #TCR_EL1_DS
 #endif
 alternative_else_nop_endif
 #endif
@@ -487,7 +510,7 @@ alternative_else_nop_endif
 	/*
 	 * Set the IPS bits in TCR_EL1.
 	 */
-	tcr_compute_pa_size tcr, #TCR_IPS_SHIFT, x5, x6
+	tcr_compute_pa_size tcr, #TCR_EL1_IPS_SHIFT, x5, x6
 #ifdef CONFIG_ARM64_HW_AFDBM
 	/*
 	 * Enable hardware update of the Access Flags bit.
@@ -497,11 +520,11 @@ alternative_else_nop_endif
 	mrs	x9, ID_AA64MMFR1_EL1
 	ubfx	x9, x9, ID_AA64MMFR1_EL1_HAFDBS_SHIFT, #4
 	cbz	x9, 1f
-	orr	tcr, tcr, #TCR_HA		// hardware Access flag update
+	orr	tcr, tcr, #TCR_EL1_HA		// hardware Access flag update
 #ifdef CONFIG_ARM64_HAFT
 	cmp	x9, ID_AA64MMFR1_EL1_HAFDBS_HAFT
 	b.lt	1f
-	orr	tcr2, tcr2, TCR2_EL1x_HAFT
+	orr	tcr2, tcr2, TCR2_EL1_HAFT
 #endif /* CONFIG_ARM64_HAFT */
 1:
 #endif	/* CONFIG_ARM64_HW_AFDBM */
@@ -512,27 +535,12 @@ alternative_else_nop_endif
 	ubfx	x1, x1, #ID_AA64MMFR3_EL1_S1PIE_SHIFT, #4
 	cbz	x1, .Lskip_indirection
 
-	/*
-	 * The PROT_* macros describing the various memory types may resolve to
-	 * C expressions if they include the PTE_MAYBE_* macros, and so they
-	 * can only be used from C code. The PIE_E* constants below are also
-	 * defined in terms of those macros, but will mask out those
-	 * PTE_MAYBE_* constants, whether they are set or not. So #define them
-	 * as 0x0 here so we can evaluate the PIE_E* constants in asm context.
-	 */
-
-#define PTE_MAYBE_NG		0
-#define PTE_MAYBE_SHARED	0
-
-	mov_q	x0, PIE_E0
+	mov_q	x0, PIE_E0_ASM
 	msr	REG_PIRE0_EL1, x0
-	mov_q	x0, PIE_E1
+	mov_q	x0, PIE_E1_ASM
 	msr	REG_PIR_EL1, x0
 
-#undef PTE_MAYBE_NG
-#undef PTE_MAYBE_SHARED
-
-	orr	tcr2, tcr2, TCR2_EL1x_PIE
+	orr	tcr2, tcr2, TCR2_EL1_PIE
 
 .Lskip_indirection:
 
diff --git a/arch/arm64/mm/ptdump.c b/arch/arm64/mm/ptdump.c
index 688fbe0271ca..ab9899ca1e5f 100644
--- a/arch/arm64/mm/ptdump.c
+++ b/arch/arm64/mm/ptdump.c
@@ -80,8 +80,8 @@ static const struct ptdump_prot_bits pte_bits[] = {
 		.set	= "CON",
 		.clear	= "   ",
 	}, {
-		.mask	= PTE_TABLE_BIT | PTE_VALID,
-		.val	= PTE_VALID,
+		.mask	= PMD_TYPE_MASK,
+		.val	= PMD_TYPE_SECT,
 		.set	= "BLK",
 		.clear	= "   ",
 	}, {
@@ -189,12 +189,12 @@ static void note_prot_wx(struct ptdump_pg_state *st, unsigned long addr)
 }
 
 void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
-	       u64 val)
+	       pteval_t val)
 {
 	struct ptdump_pg_state *st = container_of(pt_st, struct ptdump_pg_state, ptdump);
 	struct ptdump_pg_level *pg_level = st->pg_level;
 	static const char units[] = "KMGTPE";
-	u64 prot = 0;
+	ptdesc_t prot = 0;
 
 	/* check if the current level has been folded dynamically */
 	if (st->mm && ((level == 1 && mm_p4d_folded(st->mm)) ||
@@ -251,6 +251,45 @@ void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
 
 }
 
+void note_page_pte(struct ptdump_state *pt_st, unsigned long addr, pte_t pte)
+{
+	note_page(pt_st, addr, 4, pte_val(pte));
+}
+
+void note_page_pmd(struct ptdump_state *pt_st, unsigned long addr, pmd_t pmd)
+{
+	note_page(pt_st, addr, 3, pmd_val(pmd));
+}
+
+void note_page_pud(struct ptdump_state *pt_st, unsigned long addr, pud_t pud)
+{
+	note_page(pt_st, addr, 2, pud_val(pud));
+}
+
+void note_page_p4d(struct ptdump_state *pt_st, unsigned long addr, p4d_t p4d)
+{
+	note_page(pt_st, addr, 1, p4d_val(p4d));
+}
+
+void note_page_pgd(struct ptdump_state *pt_st, unsigned long addr, pgd_t pgd)
+{
+	note_page(pt_st, addr, 0, pgd_val(pgd));
+}
+
+void note_page_flush(struct ptdump_state *pt_st)
+{
+	pte_t pte_zero = {0};
+
+	note_page(pt_st, 0, -1, pte_val(pte_zero));
+}
+
+static void arm64_ptdump_walk_pgd(struct ptdump_state *st, struct mm_struct *mm)
+{
+	static_branch_inc(&arm64_ptdump_lock_key);
+	ptdump_walk_pgd(st, mm, NULL);
+	static_branch_dec(&arm64_ptdump_lock_key);
+}
+
 void ptdump_walk(struct seq_file *s, struct ptdump_info *info)
 {
 	unsigned long end = ~0UL;
@@ -266,7 +305,12 @@ void ptdump_walk(struct seq_file *s, struct ptdump_info *info)
 		.pg_level = &kernel_pg_levels[0],
 		.level = -1,
 		.ptdump = {
-			.note_page = note_page,
+			.note_page_pte = note_page_pte,
+			.note_page_pmd = note_page_pmd,
+			.note_page_pud = note_page_pud,
+			.note_page_p4d = note_page_p4d,
+			.note_page_pgd = note_page_pgd,
+			.note_page_flush = note_page_flush,
 			.range = (struct ptdump_range[]){
 				{info->base_addr, end},
 				{0, 0}
@@ -274,7 +318,7 @@ void ptdump_walk(struct seq_file *s, struct ptdump_info *info)
 		}
 	};
 
-	ptdump_walk_pgd(&st.ptdump, info->mm, NULL);
+	arm64_ptdump_walk_pgd(&st.ptdump, info->mm);
 }
 
 static void __init ptdump_initialize(void)
@@ -303,7 +347,12 @@ bool ptdump_check_wx(void)
 		.level = -1,
 		.check_wx = true,
 		.ptdump = {
-			.note_page = note_page,
+			.note_page_pte = note_page_pte,
+			.note_page_pmd = note_page_pmd,
+			.note_page_pud = note_page_pud,
+			.note_page_p4d = note_page_p4d,
+			.note_page_pgd = note_page_pgd,
+			.note_page_flush = note_page_flush,
 			.range = (struct ptdump_range[]) {
 				{_PAGE_OFFSET(vabits_actual), ~0UL},
 				{0, 0}
@@ -311,7 +360,7 @@ bool ptdump_check_wx(void)
 		}
 	};
 
-	ptdump_walk_pgd(&st.ptdump, &init_mm, NULL);
+	arm64_ptdump_walk_pgd(&st.ptdump, &init_mm);
 
 	if (st.wx_pages || st.uxn_pages) {
 		pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n",
diff --git a/arch/arm64/mm/ptdump_debugfs.c b/arch/arm64/mm/ptdump_debugfs.c
index 68bf1a125502..1e308328c079 100644
--- a/arch/arm64/mm/ptdump_debugfs.c
+++ b/arch/arm64/mm/ptdump_debugfs.c
@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/debugfs.h>
-#include <linux/memory_hotplug.h>
 #include <linux/seq_file.h>
 
 #include <asm/ptdump.h>
@@ -9,9 +8,7 @@ static int ptdump_show(struct seq_file *m, void *v)
 {
 	struct ptdump_info *info = m->private;
 
-	get_online_mems();
 	ptdump_walk(m, info);
-	put_online_mems();
 	return 0;
 }
 DEFINE_SHOW_ATTRIBUTE(ptdump);
diff --git a/arch/arm64/mm/trans_pgd.c b/arch/arm64/mm/trans_pgd.c
index 0f7b484cb2ff..18543b603c77 100644
--- a/arch/arm64/mm/trans_pgd.c
+++ b/arch/arm64/mm/trans_pgd.c
@@ -57,7 +57,7 @@ static void _copy_pte(pte_t *dst_ptep, pte_t *src_ptep, unsigned long addr)
 		 */
 		BUG_ON(!pfn_valid(pte_pfn(pte)));
 
-		__set_pte(dst_ptep, pte_mkpresent(pte_mkwrite_novma(pte)));
+		__set_pte(dst_ptep, pte_mkvalid(pte_mkwrite_novma(pte)));
 	}
 }
 
@@ -162,6 +162,13 @@ static int copy_p4d(struct trans_pgd_info *info, pgd_t *dst_pgdp,
 	unsigned long next;
 	unsigned long addr = start;
 
+	if (pgd_none(READ_ONCE(*dst_pgdp))) {
+		dst_p4dp = trans_alloc(info);
+		if (!dst_p4dp)
+			return -ENOMEM;
+		pgd_populate(NULL, dst_pgdp, dst_p4dp);
+	}
+
 	dst_p4dp = p4d_offset(dst_pgdp, start);
 	src_p4dp = p4d_offset(src_pgdp, start);
 	do {
diff --git a/arch/arm64/net/Makefile b/arch/arm64/net/Makefile
index 5c540efb7d9b..3ae382bfca87 100644
--- a/arch/arm64/net/Makefile
+++ b/arch/arm64/net/Makefile
@@ -2,4 +2,4 @@
 #
 # ARM64 networking code
 #
-obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o
+obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o bpf_timed_may_goto.o
diff --git a/arch/arm64/net/bpf_jit.h b/arch/arm64/net/bpf_jit.h
index b22ab2f97a30..bbea4f36f9f2 100644
--- a/arch/arm64/net/bpf_jit.h
+++ b/arch/arm64/net/bpf_jit.h
@@ -119,6 +119,26 @@
 	aarch64_insn_gen_load_store_ex(Rt, Rn, Rs, A64_SIZE(sf), \
 				       AARCH64_INSN_LDST_STORE_REL_EX)
 
+/* Load-acquire & store-release */
+#define A64_LDAR(Rt, Rn, size)  \
+	aarch64_insn_gen_load_acq_store_rel(Rt, Rn, AARCH64_INSN_SIZE_##size, \
+					    AARCH64_INSN_LDST_LOAD_ACQ)
+#define A64_STLR(Rt, Rn, size)  \
+	aarch64_insn_gen_load_acq_store_rel(Rt, Rn, AARCH64_INSN_SIZE_##size, \
+					    AARCH64_INSN_LDST_STORE_REL)
+
+/* Rt = [Rn] (load acquire) */
+#define A64_LDARB(Wt, Xn)	A64_LDAR(Wt, Xn, 8)
+#define A64_LDARH(Wt, Xn)	A64_LDAR(Wt, Xn, 16)
+#define A64_LDAR32(Wt, Xn)	A64_LDAR(Wt, Xn, 32)
+#define A64_LDAR64(Xt, Xn)	A64_LDAR(Xt, Xn, 64)
+
+/* [Rn] = Rt (store release) */
+#define A64_STLRB(Wt, Xn)	A64_STLR(Wt, Xn, 8)
+#define A64_STLRH(Wt, Xn)	A64_STLR(Wt, Xn, 16)
+#define A64_STLR32(Wt, Xn)	A64_STLR(Wt, Xn, 32)
+#define A64_STLR64(Xt, Xn)	A64_STLR(Xt, Xn, 64)
+
 /*
  * LSE atomics
  *
@@ -305,4 +325,9 @@
 #define A64_MRS_SP_EL0(Rt) \
 	aarch64_insn_gen_mrs(Rt, AARCH64_INSN_SYSREG_SP_EL0)
 
+/* Barriers */
+#define A64_SB aarch64_insn_get_sb_value()
+#define A64_DSB_NSH (aarch64_insn_get_dsb_base_value() | 0x7 << 8)
+#define A64_ISB aarch64_insn_get_isb_value()
+
 #endif /* _BPF_JIT_H */
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 66708b95493a..74dd29816f36 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -7,8 +7,10 @@
 
 #define pr_fmt(fmt) "bpf_jit: " fmt
 
+#include <linux/arm-smccc.h>
 #include <linux/bitfield.h>
 #include <linux/bpf.h>
+#include <linux/cfi.h>
 #include <linux/filter.h>
 #include <linux/memory.h>
 #include <linux/printk.h>
@@ -17,6 +19,7 @@
 #include <asm/asm-extable.h>
 #include <asm/byteorder.h>
 #include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
 #include <asm/debug-monitors.h>
 #include <asm/insn.h>
 #include <asm/text-patching.h>
@@ -28,6 +31,7 @@
 #define TMP_REG_2 (MAX_BPF_JIT_REG + 1)
 #define TCCNT_PTR (MAX_BPF_JIT_REG + 2)
 #define TMP_REG_3 (MAX_BPF_JIT_REG + 3)
+#define PRIVATE_SP (MAX_BPF_JIT_REG + 4)
 #define ARENA_VM_START (MAX_BPF_JIT_REG + 5)
 
 #define check_imm(bits, imm) do {				\
@@ -66,6 +70,8 @@ static const int bpf2a64[] = {
 	[TCCNT_PTR] = A64_R(26),
 	/* temporary register for blinding constants */
 	[BPF_REG_AX] = A64_R(9),
+	/* callee saved register for private stack pointer */
+	[PRIVATE_SP] = A64_R(27),
 	/* callee saved register for kern_vm_start address */
 	[ARENA_VM_START] = A64_R(28),
 };
@@ -84,6 +90,7 @@ struct jit_ctx {
 	u64 user_vm_start;
 	u64 arena_vm_start;
 	bool fp_used;
+	bool priv_sp_used;
 	bool write;
 };
 
@@ -96,6 +103,10 @@ struct bpf_plt {
 #define PLT_TARGET_SIZE   sizeof_field(struct bpf_plt, target)
 #define PLT_TARGET_OFFSET offsetof(struct bpf_plt, target)
 
+/* Memory size/value to protect private stack overflow/underflow */
+#define PRIV_STACK_GUARD_SZ    16
+#define PRIV_STACK_GUARD_VAL   0xEB9F12345678eb9fULL
+
 static inline void emit(const u32 insn, struct jit_ctx *ctx)
 {
 	if (ctx->image != NULL && ctx->write)
@@ -104,6 +115,14 @@ static inline void emit(const u32 insn, struct jit_ctx *ctx)
 	ctx->idx++;
 }
 
+static inline void emit_u32_data(const u32 data, struct jit_ctx *ctx)
+{
+	if (ctx->image != NULL && ctx->write)
+		ctx->image[ctx->idx] = data;
+
+	ctx->idx++;
+}
+
 static inline void emit_a64_mov_i(const int is64, const int reg,
 				  const s32 val, struct jit_ctx *ctx)
 {
@@ -164,6 +183,12 @@ static inline void emit_bti(u32 insn, struct jit_ctx *ctx)
 		emit(insn, ctx);
 }
 
+static inline void emit_kcfi(u32 hash, struct jit_ctx *ctx)
+{
+	if (IS_ENABLED(CONFIG_CFI))
+		emit_u32_data(hash, ctx);
+}
+
 /*
  * Kernel addresses in the vmalloc space use at most 48 bits, and the
  * remaining bits are guaranteed to be 0x1. So we can compose the address
@@ -267,6 +292,19 @@ static bool is_addsub_imm(u32 imm)
 	return !(imm & ~0xfff) || !(imm & ~0xfff000);
 }
 
+static inline void emit_a64_add_i(const bool is64, const int dst, const int src,
+				  const int tmp, const s32 imm, struct jit_ctx *ctx)
+{
+	if (is_addsub_imm(imm)) {
+		emit(A64_ADD_I(is64, dst, src, imm), ctx);
+	} else if (is_addsub_imm(-(u32)imm)) {
+		emit(A64_SUB_I(is64, dst, src, -imm), ctx);
+	} else {
+		emit_a64_mov_i(is64, tmp, imm, ctx);
+		emit(A64_ADD(is64, dst, src, tmp), ctx);
+	}
+}
+
 /*
  * There are 3 types of AArch64 LDR/STR (immediate) instruction:
  * Post-index, Pre-index, Unsigned offset.
@@ -372,8 +410,11 @@ static void find_used_callee_regs(struct jit_ctx *ctx)
 	if (reg_used & 8)
 		ctx->used_callee_reg[i++] = bpf2a64[BPF_REG_9];
 
-	if (reg_used & 16)
+	if (reg_used & 16) {
 		ctx->used_callee_reg[i++] = bpf2a64[BPF_REG_FP];
+		if (ctx->priv_sp_used)
+			ctx->used_callee_reg[i++] = bpf2a64[PRIVATE_SP];
+	}
 
 	if (ctx->arena_vm_start)
 		ctx->used_callee_reg[i++] = bpf2a64[ARENA_VM_START];
@@ -397,6 +438,7 @@ static void push_callee_regs(struct jit_ctx *ctx)
 		emit(A64_PUSH(A64_R(23), A64_R(24), A64_SP), ctx);
 		emit(A64_PUSH(A64_R(25), A64_R(26), A64_SP), ctx);
 		emit(A64_PUSH(A64_R(27), A64_R(28), A64_SP), ctx);
+		ctx->fp_used = true;
 	} else {
 		find_used_callee_regs(ctx);
 		for (i = 0; i + 1 < ctx->nr_used_callee_reg; i += 2) {
@@ -446,6 +488,19 @@ static void pop_callee_regs(struct jit_ctx *ctx)
 	}
 }
 
+static void emit_percpu_ptr(const u8 dst_reg, void __percpu *ptr,
+			    struct jit_ctx *ctx)
+{
+	const u8 tmp = bpf2a64[TMP_REG_1];
+
+	emit_a64_mov_i64(dst_reg, (__force const u64)ptr, ctx);
+	if (cpus_have_cap(ARM64_HAS_VIRT_HOST_EXTN))
+		emit(A64_MRS_TPIDR_EL2(tmp), ctx);
+	else
+		emit(A64_MRS_TPIDR_EL1(tmp), ctx);
+	emit(A64_ADD(1, dst_reg, dst_reg, tmp), ctx);
+}
+
 #define BTI_INSNS (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) ? 1 : 0)
 #define PAC_INSNS (IS_ENABLED(CONFIG_ARM64_PTR_AUTH_KERNEL) ? 1 : 0)
 
@@ -461,7 +516,8 @@ static int build_prologue(struct jit_ctx *ctx, bool ebpf_from_cbpf)
 	const bool is_main_prog = !bpf_is_subprog(prog);
 	const u8 fp = bpf2a64[BPF_REG_FP];
 	const u8 arena_vm_base = bpf2a64[ARENA_VM_START];
-	const int idx0 = ctx->idx;
+	const u8 priv_sp = bpf2a64[PRIVATE_SP];
+	void __percpu *priv_stack_ptr;
 	int cur_offset;
 
 	/*
@@ -487,6 +543,9 @@ static int build_prologue(struct jit_ctx *ctx, bool ebpf_from_cbpf)
 	 *
 	 */
 
+	emit_kcfi(is_main_prog ? cfi_bpf_hash : cfi_bpf_subprog_hash, ctx);
+	const int idx0 = ctx->idx;
+
 	/* bpf function may be invoked by 3 instruction types:
 	 * 1. bl, attached via freplace to bpf prog via short jump
 	 * 2. br, attached via freplace to bpf prog via long jump
@@ -536,15 +595,23 @@ static int build_prologue(struct jit_ctx *ctx, bool ebpf_from_cbpf)
 		emit(A64_SUB_I(1, A64_SP, A64_FP, 96), ctx);
 	}
 
-	if (ctx->fp_used)
-		/* Set up BPF prog stack base register */
-		emit(A64_MOV(1, fp, A64_SP), ctx);
-
 	/* Stack must be multiples of 16B */
 	ctx->stack_size = round_up(prog->aux->stack_depth, 16);
 
+	if (ctx->fp_used) {
+		if (ctx->priv_sp_used) {
+			/* Set up private stack pointer */
+			priv_stack_ptr = prog->aux->priv_stack_ptr + PRIV_STACK_GUARD_SZ;
+			emit_percpu_ptr(priv_sp, priv_stack_ptr, ctx);
+			emit(A64_ADD_I(1, fp, priv_sp, ctx->stack_size), ctx);
+		} else {
+			/* Set up BPF prog stack base register */
+			emit(A64_MOV(1, fp, A64_SP), ctx);
+		}
+	}
+
 	/* Set up function call stack */
-	if (ctx->stack_size)
+	if (ctx->stack_size && !ctx->priv_sp_used)
 		emit(A64_SUB_I(1, A64_SP, A64_SP, ctx->stack_size), ctx);
 
 	if (ctx->arena_vm_start)
@@ -608,7 +675,7 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx)
 	emit(A64_STR64I(tcc, ptr, 0), ctx);
 
 	/* restore SP */
-	if (ctx->stack_size)
+	if (ctx->stack_size && !ctx->priv_sp_used)
 		emit(A64_ADD_I(1, A64_SP, A64_SP, ctx->stack_size), ctx);
 
 	pop_callee_regs(ctx);
@@ -634,6 +701,81 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx)
 	return 0;
 }
 
+static int emit_atomic_ld_st(const struct bpf_insn *insn, struct jit_ctx *ctx)
+{
+	const s32 imm = insn->imm;
+	const s16 off = insn->off;
+	const u8 code = insn->code;
+	const bool arena = BPF_MODE(code) == BPF_PROBE_ATOMIC;
+	const u8 arena_vm_base = bpf2a64[ARENA_VM_START];
+	const u8 dst = bpf2a64[insn->dst_reg];
+	const u8 src = bpf2a64[insn->src_reg];
+	const u8 tmp = bpf2a64[TMP_REG_1];
+	u8 reg;
+
+	switch (imm) {
+	case BPF_LOAD_ACQ:
+		reg = src;
+		break;
+	case BPF_STORE_REL:
+		reg = dst;
+		break;
+	default:
+		pr_err_once("unknown atomic load/store op code %02x\n", imm);
+		return -EINVAL;
+	}
+
+	if (off) {
+		emit_a64_add_i(1, tmp, reg, tmp, off, ctx);
+		reg = tmp;
+	}
+	if (arena) {
+		emit(A64_ADD(1, tmp, reg, arena_vm_base), ctx);
+		reg = tmp;
+	}
+
+	switch (imm) {
+	case BPF_LOAD_ACQ:
+		switch (BPF_SIZE(code)) {
+		case BPF_B:
+			emit(A64_LDARB(dst, reg), ctx);
+			break;
+		case BPF_H:
+			emit(A64_LDARH(dst, reg), ctx);
+			break;
+		case BPF_W:
+			emit(A64_LDAR32(dst, reg), ctx);
+			break;
+		case BPF_DW:
+			emit(A64_LDAR64(dst, reg), ctx);
+			break;
+		}
+		break;
+	case BPF_STORE_REL:
+		switch (BPF_SIZE(code)) {
+		case BPF_B:
+			emit(A64_STLRB(src, reg), ctx);
+			break;
+		case BPF_H:
+			emit(A64_STLRH(src, reg), ctx);
+			break;
+		case BPF_W:
+			emit(A64_STLR32(src, reg), ctx);
+			break;
+		case BPF_DW:
+			emit(A64_STLR64(src, reg), ctx);
+			break;
+		}
+		break;
+	default:
+		pr_err_once("unexpected atomic load/store op code %02x\n",
+			    imm);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 #ifdef CONFIG_ARM64_LSE_ATOMICS
 static int emit_lse_atomic(const struct bpf_insn *insn, struct jit_ctx *ctx)
 {
@@ -648,16 +790,13 @@ static int emit_lse_atomic(const struct bpf_insn *insn, struct jit_ctx *ctx)
 	const s16 off = insn->off;
 	u8 reg = dst;
 
-	if (off || arena) {
-		if (off) {
-			emit_a64_mov_i(1, tmp, off, ctx);
-			emit(A64_ADD(1, tmp, tmp, dst), ctx);
-			reg = tmp;
-		}
-		if (arena) {
-			emit(A64_ADD(1, tmp, reg, arena_vm_base), ctx);
-			reg = tmp;
-		}
+	if (off) {
+		emit_a64_add_i(1, tmp, reg, tmp, off, ctx);
+		reg = tmp;
+	}
+	if (arena) {
+		emit(A64_ADD(1, tmp, reg, arena_vm_base), ctx);
+		reg = tmp;
 	}
 
 	switch (insn->imm) {
@@ -723,7 +862,7 @@ static int emit_ll_sc_atomic(const struct bpf_insn *insn, struct jit_ctx *ctx)
 	const s32 imm = insn->imm;
 	const s16 off = insn->off;
 	const bool isdw = BPF_SIZE(code) == BPF_DW;
-	u8 reg;
+	u8 reg = dst;
 	s32 jmp_offset;
 
 	if (BPF_MODE(code) == BPF_PROBE_ATOMIC) {
@@ -732,11 +871,8 @@ static int emit_ll_sc_atomic(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		return -EINVAL;
 	}
 
-	if (!off) {
-		reg = dst;
-	} else {
-		emit_a64_mov_i(1, tmp, off, ctx);
-		emit(A64_ADD(1, tmp, tmp, dst), ctx);
+	if (off) {
+		emit_a64_add_i(1, tmp, reg, tmp, off, ctx);
 		reg = tmp;
 	}
 
@@ -857,23 +993,70 @@ static void build_plt(struct jit_ctx *ctx)
 		plt->target = (u64)&dummy_tramp;
 }
 
-static void build_epilogue(struct jit_ctx *ctx)
+/* Clobbers BPF registers 1-4, aka x0-x3 */
+static void __maybe_unused build_bhb_mitigation(struct jit_ctx *ctx)
+{
+	const u8 r1 = bpf2a64[BPF_REG_1]; /* aka x0 */
+	u8 k = get_spectre_bhb_loop_value();
+
+	if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY) ||
+	    cpu_mitigations_off() || __nospectre_bhb ||
+	    arm64_get_spectre_v2_state() == SPECTRE_VULNERABLE)
+		return;
+
+	if (capable(CAP_SYS_ADMIN))
+		return;
+
+	if (supports_clearbhb(SCOPE_SYSTEM)) {
+		emit(aarch64_insn_gen_hint(AARCH64_INSN_HINT_CLEARBHB), ctx);
+		return;
+	}
+
+	if (k) {
+		emit_a64_mov_i64(r1, k, ctx);
+		emit(A64_B(1), ctx);
+		emit(A64_SUBS_I(true, r1, r1, 1), ctx);
+		emit(A64_B_(A64_COND_NE, -2), ctx);
+		emit(aarch64_insn_gen_dsb(AARCH64_INSN_MB_ISH), ctx);
+		emit(aarch64_insn_get_isb_value(), ctx);
+	}
+
+	if (is_spectre_bhb_fw_mitigated()) {
+		emit(A64_ORR_I(false, r1, AARCH64_INSN_REG_ZR,
+			       ARM_SMCCC_ARCH_WORKAROUND_3), ctx);
+		switch (arm_smccc_1_1_get_conduit()) {
+		case SMCCC_CONDUIT_HVC:
+			emit(aarch64_insn_get_hvc_value(), ctx);
+			break;
+		case SMCCC_CONDUIT_SMC:
+			emit(aarch64_insn_get_smc_value(), ctx);
+			break;
+		default:
+			pr_err_once("Firmware mitigation enabled with unknown conduit\n");
+		}
+	}
+}
+
+static void build_epilogue(struct jit_ctx *ctx, bool was_classic)
 {
 	const u8 r0 = bpf2a64[BPF_REG_0];
 	const u8 ptr = bpf2a64[TCCNT_PTR];
 
 	/* We're done with BPF stack */
-	if (ctx->stack_size)
+	if (ctx->stack_size && !ctx->priv_sp_used)
 		emit(A64_ADD_I(1, A64_SP, A64_SP, ctx->stack_size), ctx);
 
 	pop_callee_regs(ctx);
 
 	emit(A64_POP(A64_ZR, ptr, A64_SP), ctx);
 
+	if (was_classic)
+		build_bhb_mitigation(ctx);
+
 	/* Restore FP/LR registers */
 	emit(A64_POP(A64_FP, A64_LR, A64_SP), ctx);
 
-	/* Set return value */
+	/* Move the return value from bpf:r0 (aka x7) to x0 */
 	emit(A64_MOV(1, A64_R(0), r0), ctx);
 
 	/* Authenticate lr */
@@ -883,19 +1066,53 @@ static void build_epilogue(struct jit_ctx *ctx)
 	emit(A64_RET(A64_LR), ctx);
 }
 
-#define BPF_FIXUP_OFFSET_MASK	GENMASK(26, 0)
+/*
+ * Metadata encoding for exception handling in JITed code.
+ *
+ * Format of `fixup` field in `struct exception_table_entry`:
+ *
+ * Bit layout of `fixup` (32-bit):
+ *
+ * +-----------+--------+-----------+-----------+----------+
+ * |   31-27   | 26-22  |     21    |   20-16   |   15-0   |
+ * |           |        |           |           |          |
+ * | FIXUP_REG | Unused | ARENA_ACC | ARENA_REG |  OFFSET  |
+ * +-----------+--------+-----------+-----------+----------+
+ *
+ * - OFFSET (16 bits): Offset used to compute address for Load/Store instruction.
+ * - ARENA_REG (5 bits): Register that is used to calculate the address for load/store when
+ *                       accessing the arena region.
+ * - ARENA_ACCESS (1 bit): This bit is set when the faulting instruction accessed the arena region.
+ * - FIXUP_REG (5 bits): Destination register for the load instruction (cleared on fault) or set to
+ *                       DONT_CLEAR if it is a store instruction.
+ */
+
+#define BPF_FIXUP_OFFSET_MASK      GENMASK(15, 0)
+#define BPF_FIXUP_ARENA_REG_MASK   GENMASK(20, 16)
+#define BPF_ARENA_ACCESS           BIT(21)
 #define BPF_FIXUP_REG_MASK	GENMASK(31, 27)
 #define DONT_CLEAR 5 /* Unused ARM64 register from BPF's POV */
 
 bool ex_handler_bpf(const struct exception_table_entry *ex,
 		    struct pt_regs *regs)
 {
-	off_t offset = FIELD_GET(BPF_FIXUP_OFFSET_MASK, ex->fixup);
 	int dst_reg = FIELD_GET(BPF_FIXUP_REG_MASK, ex->fixup);
+	s16 off = FIELD_GET(BPF_FIXUP_OFFSET_MASK, ex->fixup);
+	int arena_reg = FIELD_GET(BPF_FIXUP_ARENA_REG_MASK, ex->fixup);
+	bool is_arena = !!(ex->fixup & BPF_ARENA_ACCESS);
+	bool is_write = (dst_reg == DONT_CLEAR);
+	unsigned long addr;
+
+	if (is_arena) {
+		addr = regs->regs[arena_reg] + off;
+		bpf_prog_report_arena_violation(is_write, addr, regs->pc);
+	}
 
 	if (dst_reg != DONT_CLEAR)
 		regs->regs[dst_reg] = 0;
-	regs->pc = (unsigned long)&ex->fixup - offset;
+	/* Skip the faulting instruction */
+	regs->pc += AARCH64_INSN_SIZE;
+
 	return true;
 }
 
@@ -905,7 +1122,9 @@ static int add_exception_handler(const struct bpf_insn *insn,
 				 int dst_reg)
 {
 	off_t ins_offset;
-	off_t fixup_offset;
+	s16 off = insn->off;
+	bool is_arena;
+	int arena_reg;
 	unsigned long pc;
 	struct exception_table_entry *ex;
 
@@ -914,11 +1133,16 @@ static int add_exception_handler(const struct bpf_insn *insn,
 		return 0;
 
 	if (BPF_MODE(insn->code) != BPF_PROBE_MEM &&
-		BPF_MODE(insn->code) != BPF_PROBE_MEMSX &&
-			BPF_MODE(insn->code) != BPF_PROBE_MEM32 &&
-				BPF_MODE(insn->code) != BPF_PROBE_ATOMIC)
+	    BPF_MODE(insn->code) != BPF_PROBE_MEMSX &&
+	    BPF_MODE(insn->code) != BPF_PROBE_MEM32 &&
+	    BPF_MODE(insn->code) != BPF_PROBE_MEM32SX &&
+	    BPF_MODE(insn->code) != BPF_PROBE_ATOMIC)
 		return 0;
 
+	is_arena = (BPF_MODE(insn->code) == BPF_PROBE_MEM32) ||
+		   (BPF_MODE(insn->code) == BPF_PROBE_MEM32SX) ||
+		   (BPF_MODE(insn->code) == BPF_PROBE_ATOMIC);
+
 	if (!ctx->prog->aux->extable ||
 	    WARN_ON_ONCE(ctx->exentry_idx >= ctx->prog->aux->num_exentries))
 		return -EINVAL;
@@ -937,22 +1161,6 @@ static int add_exception_handler(const struct bpf_insn *insn,
 		return -ERANGE;
 
 	/*
-	 * Since the extable follows the program, the fixup offset is always
-	 * negative and limited to BPF_JIT_REGION_SIZE. Store a positive value
-	 * to keep things simple, and put the destination register in the upper
-	 * bits. We don't need to worry about buildtime or runtime sort
-	 * modifying the upper bits because the table is already sorted, and
-	 * isn't part of the main exception table.
-	 *
-	 * The fixup_offset is set to the next instruction from the instruction
-	 * that may fault. The execution will jump to this after handling the
-	 * fault.
-	 */
-	fixup_offset = (long)&ex->fixup - (pc + AARCH64_INSN_SIZE);
-	if (!FIELD_FIT(BPF_FIXUP_OFFSET_MASK, fixup_offset))
-		return -ERANGE;
-
-	/*
 	 * The offsets above have been calculated using the RO buffer but we
 	 * need to use the R/W buffer for writes.
 	 * switch ex to rw buffer for writing.
@@ -964,8 +1172,26 @@ static int add_exception_handler(const struct bpf_insn *insn,
 	if (BPF_CLASS(insn->code) != BPF_LDX)
 		dst_reg = DONT_CLEAR;
 
-	ex->fixup = FIELD_PREP(BPF_FIXUP_OFFSET_MASK, fixup_offset) |
-		    FIELD_PREP(BPF_FIXUP_REG_MASK, dst_reg);
+	ex->fixup = FIELD_PREP(BPF_FIXUP_REG_MASK, dst_reg);
+
+	if (is_arena) {
+		ex->fixup |= BPF_ARENA_ACCESS;
+		/*
+		 * insn->src_reg/dst_reg holds the address in the arena region with upper 32-bits
+		 * being zero because of a preceding addr_space_cast(r<n>, 0x0, 0x1) instruction.
+		 * This address is adjusted with the addition of arena_vm_start (see the
+		 * implementation of BPF_PROBE_MEM32 and BPF_PROBE_ATOMIC) before being used for the
+		 * memory access. Pass the reg holding the unmodified 32-bit address to
+		 * ex_handler_bpf.
+		 */
+		if (BPF_CLASS(insn->code) == BPF_LDX)
+			arena_reg = bpf2a64[insn->src_reg];
+		else
+			arena_reg = bpf2a64[insn->dst_reg];
+
+		ex->fixup |=  FIELD_PREP(BPF_FIXUP_OFFSET_MASK, off) |
+			      FIELD_PREP(BPF_FIXUP_ARENA_REG_MASK, arena_reg);
+	}
 
 	ex->type = EX_TYPE_BPF;
 
@@ -987,8 +1213,10 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 	u8 src = bpf2a64[insn->src_reg];
 	const u8 tmp = bpf2a64[TMP_REG_1];
 	const u8 tmp2 = bpf2a64[TMP_REG_2];
+	const u8 tmp3 = bpf2a64[TMP_REG_3];
 	const u8 fp = bpf2a64[BPF_REG_FP];
 	const u8 arena_vm_base = bpf2a64[ARENA_VM_START];
+	const u8 priv_sp = bpf2a64[PRIVATE_SP];
 	const s16 off = insn->off;
 	const s32 imm = insn->imm;
 	const int i = insn - ctx->prog->insnsi;
@@ -1146,20 +1374,13 @@ emit_bswap_uxt:
 	/* dst = dst OP imm */
 	case BPF_ALU | BPF_ADD | BPF_K:
 	case BPF_ALU64 | BPF_ADD | BPF_K:
-		if (is_addsub_imm(imm)) {
-			emit(A64_ADD_I(is64, dst, dst, imm), ctx);
-		} else if (is_addsub_imm(-imm)) {
-			emit(A64_SUB_I(is64, dst, dst, -imm), ctx);
-		} else {
-			emit_a64_mov_i(is64, tmp, imm, ctx);
-			emit(A64_ADD(is64, dst, dst, tmp), ctx);
-		}
+		emit_a64_add_i(is64, dst, dst, tmp, imm, ctx);
 		break;
 	case BPF_ALU | BPF_SUB | BPF_K:
 	case BPF_ALU64 | BPF_SUB | BPF_K:
 		if (is_addsub_imm(imm)) {
 			emit(A64_SUB_I(is64, dst, dst, imm), ctx);
-		} else if (is_addsub_imm(-imm)) {
+		} else if (is_addsub_imm(-(u32)imm)) {
 			emit(A64_ADD_I(is64, dst, dst, -imm), ctx);
 		} else {
 			emit_a64_mov_i(is64, tmp, imm, ctx);
@@ -1231,6 +1452,10 @@ emit_bswap_uxt:
 		emit(A64_ASR(is64, dst, dst, imm), ctx);
 		break;
 
+	/* JUMP reg */
+	case BPF_JMP | BPF_JA | BPF_X:
+		emit(A64_BR(dst), ctx);
+		break;
 	/* JUMP off */
 	case BPF_JMP | BPF_JA:
 	case BPF_JMP32 | BPF_JA:
@@ -1330,7 +1555,7 @@ emit_cond_jmp:
 	case BPF_JMP32 | BPF_JSLE | BPF_K:
 		if (is_addsub_imm(imm)) {
 			emit(A64_CMP_I(is64, dst, imm), ctx);
-		} else if (is_addsub_imm(-imm)) {
+		} else if (is_addsub_imm(-(u32)imm)) {
 			emit(A64_CMN_I(is64, dst, -imm), ctx);
 		} else {
 			emit_a64_mov_i(is64, tmp, imm, ctx);
@@ -1381,7 +1606,13 @@ emit_cond_jmp:
 		if (ret < 0)
 			return ret;
 		emit_call(func_addr, ctx);
-		emit(A64_MOV(1, r0, A64_R(0)), ctx);
+		/*
+		 * Call to arch_bpf_timed_may_goto() is emitted by the
+		 * verifier and called with custom calling convention with
+		 * first argument and return value in BPF_REG_AX (x9).
+		 */
+		if (func_addr != (u64)arch_bpf_timed_may_goto)
+			emit(A64_MOV(1, r0, A64_R(0)), ctx);
 		break;
 	}
 	/* tail call */
@@ -1435,19 +1666,24 @@ emit_cond_jmp:
 	case BPF_LDX | BPF_PROBE_MEM32 | BPF_H:
 	case BPF_LDX | BPF_PROBE_MEM32 | BPF_W:
 	case BPF_LDX | BPF_PROBE_MEM32 | BPF_DW:
-		if (BPF_MODE(insn->code) == BPF_PROBE_MEM32) {
+	case BPF_LDX | BPF_PROBE_MEM32SX | BPF_B:
+	case BPF_LDX | BPF_PROBE_MEM32SX | BPF_H:
+	case BPF_LDX | BPF_PROBE_MEM32SX | BPF_W:
+		if (BPF_MODE(insn->code) == BPF_PROBE_MEM32 ||
+		    BPF_MODE(insn->code) == BPF_PROBE_MEM32SX) {
 			emit(A64_ADD(1, tmp2, src, arena_vm_base), ctx);
 			src = tmp2;
 		}
 		if (src == fp) {
-			src_adj = A64_SP;
+			src_adj = ctx->priv_sp_used ? priv_sp : A64_SP;
 			off_adj = off + ctx->stack_size;
 		} else {
 			src_adj = src;
 			off_adj = off;
 		}
 		sign_extend = (BPF_MODE(insn->code) == BPF_MEMSX ||
-				BPF_MODE(insn->code) == BPF_PROBE_MEMSX);
+				BPF_MODE(insn->code) == BPF_PROBE_MEMSX ||
+				 BPF_MODE(insn->code) == BPF_PROBE_MEM32SX);
 		switch (BPF_SIZE(code)) {
 		case BPF_W:
 			if (is_lsi_offset(off_adj, 2)) {
@@ -1506,17 +1742,14 @@ emit_cond_jmp:
 			return ret;
 		break;
 
-	/* speculation barrier */
+	/* speculation barrier against v1 and v4 */
 	case BPF_ST | BPF_NOSPEC:
-		/*
-		 * Nothing required here.
-		 *
-		 * In case of arm64, we rely on the firmware mitigation of
-		 * Speculative Store Bypass as controlled via the ssbd kernel
-		 * parameter. Whenever the mitigation is enabled, it works
-		 * for all of the kernel code with no need to provide any
-		 * additional instructions.
-		 */
+		if (alternative_has_cap_likely(ARM64_HAS_SB)) {
+			emit(A64_SB, ctx);
+		} else {
+			emit(A64_DSB_NSH, ctx);
+			emit(A64_ISB, ctx);
+		}
 		break;
 
 	/* ST: *(size *)(dst + off) = imm */
@@ -1529,11 +1762,11 @@ emit_cond_jmp:
 	case BPF_ST | BPF_PROBE_MEM32 | BPF_W:
 	case BPF_ST | BPF_PROBE_MEM32 | BPF_DW:
 		if (BPF_MODE(insn->code) == BPF_PROBE_MEM32) {
-			emit(A64_ADD(1, tmp2, dst, arena_vm_base), ctx);
-			dst = tmp2;
+			emit(A64_ADD(1, tmp3, dst, arena_vm_base), ctx);
+			dst = tmp3;
 		}
 		if (dst == fp) {
-			dst_adj = A64_SP;
+			dst_adj = ctx->priv_sp_used ? priv_sp : A64_SP;
 			off_adj = off + ctx->stack_size;
 		} else {
 			dst_adj = dst;
@@ -1595,7 +1828,7 @@ emit_cond_jmp:
 			dst = tmp2;
 		}
 		if (dst == fp) {
-			dst_adj = A64_SP;
+			dst_adj = ctx->priv_sp_used ? priv_sp : A64_SP;
 			off_adj = off + ctx->stack_size;
 		} else {
 			dst_adj = dst;
@@ -1641,20 +1874,28 @@ emit_cond_jmp:
 			return ret;
 		break;
 
+	case BPF_STX | BPF_ATOMIC | BPF_B:
+	case BPF_STX | BPF_ATOMIC | BPF_H:
 	case BPF_STX | BPF_ATOMIC | BPF_W:
 	case BPF_STX | BPF_ATOMIC | BPF_DW:
+	case BPF_STX | BPF_PROBE_ATOMIC | BPF_B:
+	case BPF_STX | BPF_PROBE_ATOMIC | BPF_H:
 	case BPF_STX | BPF_PROBE_ATOMIC | BPF_W:
 	case BPF_STX | BPF_PROBE_ATOMIC | BPF_DW:
-		if (cpus_have_cap(ARM64_HAS_LSE_ATOMICS))
+		if (bpf_atomic_is_load_store(insn))
+			ret = emit_atomic_ld_st(insn, ctx);
+		else if (cpus_have_cap(ARM64_HAS_LSE_ATOMICS))
 			ret = emit_lse_atomic(insn, ctx);
 		else
 			ret = emit_ll_sc_atomic(insn, ctx);
 		if (ret)
 			return ret;
 
-		ret = add_exception_handler(insn, ctx, dst);
-		if (ret)
-			return ret;
+		if (BPF_MODE(insn->code) == BPF_PROBE_ATOMIC) {
+			ret = add_exception_handler(insn, ctx, dst);
+			if (ret)
+				return ret;
+		}
 		break;
 
 	default:
@@ -1732,6 +1973,39 @@ static inline void bpf_flush_icache(void *start, void *end)
 	flush_icache_range((unsigned long)start, (unsigned long)end);
 }
 
+static void priv_stack_init_guard(void __percpu *priv_stack_ptr, int alloc_size)
+{
+	int cpu, underflow_idx = (alloc_size - PRIV_STACK_GUARD_SZ) >> 3;
+	u64 *stack_ptr;
+
+	for_each_possible_cpu(cpu) {
+		stack_ptr = per_cpu_ptr(priv_stack_ptr, cpu);
+		stack_ptr[0] = PRIV_STACK_GUARD_VAL;
+		stack_ptr[1] = PRIV_STACK_GUARD_VAL;
+		stack_ptr[underflow_idx] = PRIV_STACK_GUARD_VAL;
+		stack_ptr[underflow_idx + 1] = PRIV_STACK_GUARD_VAL;
+	}
+}
+
+static void priv_stack_check_guard(void __percpu *priv_stack_ptr, int alloc_size,
+				   struct bpf_prog *prog)
+{
+	int cpu, underflow_idx = (alloc_size - PRIV_STACK_GUARD_SZ) >> 3;
+	u64 *stack_ptr;
+
+	for_each_possible_cpu(cpu) {
+		stack_ptr = per_cpu_ptr(priv_stack_ptr, cpu);
+		if (stack_ptr[0] != PRIV_STACK_GUARD_VAL ||
+		    stack_ptr[1] != PRIV_STACK_GUARD_VAL ||
+		    stack_ptr[underflow_idx] != PRIV_STACK_GUARD_VAL ||
+		    stack_ptr[underflow_idx + 1] != PRIV_STACK_GUARD_VAL) {
+			pr_err("BPF private stack overflow/underflow detected for prog %sx\n",
+			       bpf_jit_get_prog_name(prog));
+			break;
+		}
+	}
+}
+
 struct arm64_jit_data {
 	struct bpf_binary_header *header;
 	u8 *ro_image;
@@ -1744,9 +2018,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	int image_size, prog_size, extable_size, extable_align, extable_offset;
 	struct bpf_prog *tmp, *orig_prog = prog;
 	struct bpf_binary_header *header;
-	struct bpf_binary_header *ro_header;
+	struct bpf_binary_header *ro_header = NULL;
 	struct arm64_jit_data *jit_data;
+	void __percpu *priv_stack_ptr = NULL;
 	bool was_classic = bpf_prog_was_classic(prog);
+	int priv_stack_alloc_sz;
 	bool tmp_blinded = false;
 	bool extra_pass = false;
 	struct jit_ctx ctx;
@@ -1778,6 +2054,23 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		}
 		prog->aux->jit_data = jit_data;
 	}
+	priv_stack_ptr = prog->aux->priv_stack_ptr;
+	if (!priv_stack_ptr && prog->aux->jits_use_priv_stack) {
+		/* Allocate actual private stack size with verifier-calculated
+		 * stack size plus two memory guards to protect overflow and
+		 * underflow.
+		 */
+		priv_stack_alloc_sz = round_up(prog->aux->stack_depth, 16) +
+				      2 * PRIV_STACK_GUARD_SZ;
+		priv_stack_ptr = __alloc_percpu_gfp(priv_stack_alloc_sz, 16, GFP_KERNEL);
+		if (!priv_stack_ptr) {
+			prog = orig_prog;
+			goto out_priv_stack;
+		}
+
+		priv_stack_init_guard(priv_stack_ptr, priv_stack_alloc_sz);
+		prog->aux->priv_stack_ptr = priv_stack_ptr;
+	}
 	if (jit_data->ctx.offset) {
 		ctx = jit_data->ctx;
 		ro_image_ptr = jit_data->ro_image;
@@ -1801,6 +2094,9 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	ctx.user_vm_start = bpf_arena_get_user_vm_start(prog->aux->arena);
 	ctx.arena_vm_start = bpf_arena_get_kern_vm_start(prog->aux->arena);
 
+	if (priv_stack_ptr)
+		ctx.priv_sp_used = true;
+
 	/* Pass 1: Estimate the maximum image size.
 	 *
 	 * BPF line info needs ctx->offset[i] to be the offset of
@@ -1817,7 +2113,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	}
 
 	ctx.epilogue_offset = ctx.idx;
-	build_epilogue(&ctx);
+	build_epilogue(&ctx, was_classic);
 	build_plt(&ctx);
 
 	extable_align = __alignof__(struct exception_table_entry);
@@ -1880,7 +2176,7 @@ skip_init_ctx:
 		goto out_free_hdr;
 	}
 
-	build_epilogue(&ctx);
+	build_epilogue(&ctx, was_classic);
 	build_plt(&ctx);
 
 	/* Extra pass to validate JITed code. */
@@ -1928,9 +2224,9 @@ skip_init_ctx:
 		jit_data->ro_header = ro_header;
 	}
 
-	prog->bpf_func = (void *)ctx.ro_image;
+	prog->bpf_func = (void *)ctx.ro_image + cfi_get_offset();
 	prog->jited = 1;
-	prog->jited_len = prog_size;
+	prog->jited_len = prog_size - cfi_get_offset();
 
 	if (!prog->is_func || extra_pass) {
 		int i;
@@ -1939,8 +2235,20 @@ skip_init_ctx:
 		for (i = 0; i <= prog->len; i++)
 			ctx.offset[i] *= AARCH64_INSN_SIZE;
 		bpf_prog_fill_jited_linfo(prog, ctx.offset + 1);
+		/*
+		 * The bpf_prog_update_insn_ptrs function expects offsets to
+		 * point to the first byte of the jitted instruction (unlike
+		 * the bpf_prog_fill_jited_linfo above, which, for historical
+		 * reasons, expects to point to the next instruction)
+		 */
+		bpf_prog_update_insn_ptrs(prog, ctx.offset, ctx.ro_image);
 out_off:
+		if (!ro_header && priv_stack_ptr) {
+			free_percpu(priv_stack_ptr);
+			prog->aux->priv_stack_ptr = NULL;
+		}
 		kvfree(ctx.offset);
+out_priv_stack:
 		kfree(jit_data);
 		prog->aux->jit_data = NULL;
 	}
@@ -1959,6 +2267,11 @@ out_free_hdr:
 	goto out_off;
 }
 
+bool bpf_jit_supports_private_stack(void)
+{
+	return true;
+}
+
 bool bpf_jit_supports_kfunc_call(void)
 {
 	return true;
@@ -1983,7 +2296,7 @@ bool bpf_jit_supports_subprog_tailcalls(void)
 }
 
 static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
-			    int args_off, int retval_off, int run_ctx_off,
+			    int bargs_off, int retval_off, int run_ctx_off,
 			    bool save_ret)
 {
 	__le32 *branch;
@@ -2025,7 +2338,7 @@ static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
 	branch = ctx->image + ctx->idx;
 	emit(A64_NOP, ctx);
 
-	emit(A64_ADD_I(1, A64_R(0), A64_SP, args_off), ctx);
+	emit(A64_ADD_I(1, A64_R(0), A64_SP, bargs_off), ctx);
 	if (!p->jited)
 		emit_addr_mov_i64(A64_R(1), (const u64)p->insnsi, ctx);
 
@@ -2050,7 +2363,7 @@ static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
 }
 
 static void invoke_bpf_mod_ret(struct jit_ctx *ctx, struct bpf_tramp_links *tl,
-			       int args_off, int retval_off, int run_ctx_off,
+			       int bargs_off, int retval_off, int run_ctx_off,
 			       __le32 **branches)
 {
 	int i;
@@ -2060,7 +2373,7 @@ static void invoke_bpf_mod_ret(struct jit_ctx *ctx, struct bpf_tramp_links *tl,
 	 */
 	emit(A64_STR64I(A64_ZR, A64_SP, retval_off), ctx);
 	for (i = 0; i < tl->nr_links; i++) {
-		invoke_bpf_prog(ctx, tl->links[i], args_off, retval_off,
+		invoke_bpf_prog(ctx, tl->links[i], bargs_off, retval_off,
 				run_ctx_off, true);
 		/* if (*(u64 *)(sp + retval_off) !=  0)
 		 *	goto do_fexit;
@@ -2074,23 +2387,120 @@ static void invoke_bpf_mod_ret(struct jit_ctx *ctx, struct bpf_tramp_links *tl,
 	}
 }
 
-static void save_args(struct jit_ctx *ctx, int args_off, int nregs)
+struct arg_aux {
+	/* how many args are passed through registers, the rest of the args are
+	 * passed through stack
+	 */
+	int args_in_regs;
+	/* how many registers are used to pass arguments */
+	int regs_for_args;
+	/* how much stack is used for additional args passed to bpf program
+	 * that did not fit in original function registers
+	 */
+	int bstack_for_args;
+	/* home much stack is used for additional args passed to the
+	 * original function when called from trampoline (this one needs
+	 * arguments to be properly aligned)
+	 */
+	int ostack_for_args;
+};
+
+static int calc_arg_aux(const struct btf_func_model *m,
+			 struct arg_aux *a)
+{
+	int stack_slots, nregs, slots, i;
+
+	/* verifier ensures m->nr_args <= MAX_BPF_FUNC_ARGS */
+	for (i = 0, nregs = 0; i < m->nr_args; i++) {
+		slots = (m->arg_size[i] + 7) / 8;
+		if (nregs + slots <= 8) /* passed through register ? */
+			nregs += slots;
+		else
+			break;
+	}
+
+	a->args_in_regs = i;
+	a->regs_for_args = nregs;
+	a->ostack_for_args = 0;
+	a->bstack_for_args = 0;
+
+	/* the rest arguments are passed through stack */
+	for (; i < m->nr_args; i++) {
+		stack_slots = (m->arg_size[i] + 7) / 8;
+		a->bstack_for_args += stack_slots * 8;
+		a->ostack_for_args = a->ostack_for_args + stack_slots * 8;
+	}
+
+	return 0;
+}
+
+static void clear_garbage(struct jit_ctx *ctx, int reg, int effective_bytes)
+{
+	if (effective_bytes) {
+		int garbage_bits = 64 - 8 * effective_bytes;
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		/* garbage bits are at the right end */
+		emit(A64_LSR(1, reg, reg, garbage_bits), ctx);
+		emit(A64_LSL(1, reg, reg, garbage_bits), ctx);
+#else
+		/* garbage bits are at the left end */
+		emit(A64_LSL(1, reg, reg, garbage_bits), ctx);
+		emit(A64_LSR(1, reg, reg, garbage_bits), ctx);
+#endif
+	}
+}
+
+static void save_args(struct jit_ctx *ctx, int bargs_off, int oargs_off,
+		      const struct btf_func_model *m,
+		      const struct arg_aux *a,
+		      bool for_call_origin)
 {
 	int i;
+	int reg;
+	int doff;
+	int soff;
+	int slots;
+	u8 tmp = bpf2a64[TMP_REG_1];
+
+	/* store arguments to the stack for the bpf program, or restore
+	 * arguments from stack for the original function
+	 */
+	for (reg = 0; reg < a->regs_for_args; reg++) {
+		emit(for_call_origin ?
+		     A64_LDR64I(reg, A64_SP, bargs_off) :
+		     A64_STR64I(reg, A64_SP, bargs_off),
+		     ctx);
+		bargs_off += 8;
+	}
 
-	for (i = 0; i < nregs; i++) {
-		emit(A64_STR64I(i, A64_SP, args_off), ctx);
-		args_off += 8;
+	soff = 32; /* on stack arguments start from FP + 32 */
+	doff = (for_call_origin ? oargs_off : bargs_off);
+
+	/* save on stack arguments */
+	for (i = a->args_in_regs; i < m->nr_args; i++) {
+		slots = (m->arg_size[i] + 7) / 8;
+		/* verifier ensures arg_size <= 16, so slots equals 1 or 2 */
+		while (slots-- > 0) {
+			emit(A64_LDR64I(tmp, A64_FP, soff), ctx);
+			/* if there is unused space in the last slot, clear
+			 * the garbage contained in the space.
+			 */
+			if (slots == 0 && !for_call_origin)
+				clear_garbage(ctx, tmp, m->arg_size[i] % 8);
+			emit(A64_STR64I(tmp, A64_SP, doff), ctx);
+			soff += 8;
+			doff += 8;
+		}
 	}
 }
 
-static void restore_args(struct jit_ctx *ctx, int args_off, int nregs)
+static void restore_args(struct jit_ctx *ctx, int bargs_off, int nregs)
 {
-	int i;
+	int reg;
 
-	for (i = 0; i < nregs; i++) {
-		emit(A64_LDR64I(i, A64_SP, args_off), ctx);
-		args_off += 8;
+	for (reg = 0; reg < nregs; reg++) {
+		emit(A64_LDR64I(reg, A64_SP, bargs_off), ctx);
+		bargs_off += 8;
 	}
 }
 
@@ -2113,17 +2523,21 @@ static bool is_struct_ops_tramp(const struct bpf_tramp_links *fentry_links)
  */
 static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 			      struct bpf_tramp_links *tlinks, void *func_addr,
-			      int nregs, u32 flags)
+			      const struct btf_func_model *m,
+			      const struct arg_aux *a,
+			      u32 flags)
 {
 	int i;
 	int stack_size;
 	int retaddr_off;
 	int regs_off;
 	int retval_off;
-	int args_off;
-	int nregs_off;
+	int bargs_off;
+	int nfuncargs_off;
 	int ip_off;
 	int run_ctx_off;
+	int oargs_off;
+	int nfuncargs;
 	struct bpf_tramp_links *fentry = &tlinks[BPF_TRAMP_FENTRY];
 	struct bpf_tramp_links *fexit = &tlinks[BPF_TRAMP_FEXIT];
 	struct bpf_tramp_links *fmod_ret = &tlinks[BPF_TRAMP_MODIFY_RETURN];
@@ -2132,31 +2546,38 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	bool is_struct_ops = is_struct_ops_tramp(fentry);
 
 	/* trampoline stack layout:
-	 *                  [ parent ip         ]
-	 *                  [ FP                ]
-	 * SP + retaddr_off [ self ip           ]
-	 *                  [ FP                ]
+	 *                    [ parent ip         ]
+	 *                    [ FP                ]
+	 * SP + retaddr_off   [ self ip           ]
+	 *                    [ FP                ]
 	 *
-	 *                  [ padding           ] align SP to multiples of 16
+	 *                    [ padding           ] align SP to multiples of 16
 	 *
-	 *                  [ x20               ] callee saved reg x20
-	 * SP + regs_off    [ x19               ] callee saved reg x19
+	 *                    [ x20               ] callee saved reg x20
+	 * SP + regs_off      [ x19               ] callee saved reg x19
 	 *
-	 * SP + retval_off  [ return value      ] BPF_TRAMP_F_CALL_ORIG or
-	 *                                        BPF_TRAMP_F_RET_FENTRY_RET
+	 * SP + retval_off    [ return value      ] BPF_TRAMP_F_CALL_ORIG or
+	 *                                          BPF_TRAMP_F_RET_FENTRY_RET
+	 *                    [ arg reg N         ]
+	 *                    [ ...               ]
+	 * SP + bargs_off     [ arg reg 1         ] for bpf
 	 *
-	 *                  [ arg reg N         ]
-	 *                  [ ...               ]
-	 * SP + args_off    [ arg reg 1         ]
+	 * SP + nfuncargs_off [ arg regs count    ]
 	 *
-	 * SP + nregs_off   [ arg regs count    ]
+	 * SP + ip_off        [ traced function   ] BPF_TRAMP_F_IP_ARG flag
 	 *
-	 * SP + ip_off      [ traced function   ] BPF_TRAMP_F_IP_ARG flag
+	 * SP + run_ctx_off   [ bpf_tramp_run_ctx ]
 	 *
-	 * SP + run_ctx_off [ bpf_tramp_run_ctx ]
+	 *                    [ stack arg N       ]
+	 *                    [ ...               ]
+	 * SP + oargs_off     [ stack arg 1       ] for original func
 	 */
 
 	stack_size = 0;
+	oargs_off = stack_size;
+	if (flags & BPF_TRAMP_F_CALL_ORIG)
+		stack_size +=  a->ostack_for_args;
+
 	run_ctx_off = stack_size;
 	/* room for bpf_tramp_run_ctx */
 	stack_size += round_up(sizeof(struct bpf_tramp_run_ctx), 8);
@@ -2166,13 +2587,14 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	if (flags & BPF_TRAMP_F_IP_ARG)
 		stack_size += 8;
 
-	nregs_off = stack_size;
+	nfuncargs_off = stack_size;
 	/* room for args count */
 	stack_size += 8;
 
-	args_off = stack_size;
+	bargs_off = stack_size;
 	/* room for args */
-	stack_size += nregs * 8;
+	nfuncargs = a->regs_for_args + a->bstack_for_args / 8;
+	stack_size += 8 * nfuncargs;
 
 	/* room for return value */
 	retval_off = stack_size;
@@ -2190,6 +2612,12 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	/* return address locates above FP */
 	retaddr_off = stack_size + 8;
 
+	if (flags & BPF_TRAMP_F_INDIRECT) {
+		/*
+		 * Indirect call for bpf_struct_ops
+		 */
+		emit_kcfi(cfi_get_func_hash(func_addr), ctx);
+	}
 	/* bpf trampoline may be invoked by 3 instruction types:
 	 * 1. bl, attached to bpf prog or kernel function via short jump
 	 * 2. br, attached to bpf prog or kernel function via long jump
@@ -2219,11 +2647,11 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	}
 
 	/* save arg regs count*/
-	emit(A64_MOVZ(1, A64_R(10), nregs, 0), ctx);
-	emit(A64_STR64I(A64_R(10), A64_SP, nregs_off), ctx);
+	emit(A64_MOVZ(1, A64_R(10), nfuncargs, 0), ctx);
+	emit(A64_STR64I(A64_R(10), A64_SP, nfuncargs_off), ctx);
 
-	/* save arg regs */
-	save_args(ctx, args_off, nregs);
+	/* save args for bpf */
+	save_args(ctx, bargs_off, oargs_off, m, a, false);
 
 	/* save callee saved registers */
 	emit(A64_STR64I(A64_R(19), A64_SP, regs_off), ctx);
@@ -2239,7 +2667,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	}
 
 	for (i = 0; i < fentry->nr_links; i++)
-		invoke_bpf_prog(ctx, fentry->links[i], args_off,
+		invoke_bpf_prog(ctx, fentry->links[i], bargs_off,
 				retval_off, run_ctx_off,
 				flags & BPF_TRAMP_F_RET_FENTRY_RET);
 
@@ -2249,12 +2677,13 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 		if (!branches)
 			return -ENOMEM;
 
-		invoke_bpf_mod_ret(ctx, fmod_ret, args_off, retval_off,
+		invoke_bpf_mod_ret(ctx, fmod_ret, bargs_off, retval_off,
 				   run_ctx_off, branches);
 	}
 
 	if (flags & BPF_TRAMP_F_CALL_ORIG) {
-		restore_args(ctx, args_off, nregs);
+		/* save args for original func */
+		save_args(ctx, bargs_off, oargs_off, m, a, true);
 		/* call original func */
 		emit(A64_LDR64I(A64_R(10), A64_SP, retaddr_off), ctx);
 		emit(A64_ADR(A64_LR, AARCH64_INSN_SIZE * 2), ctx);
@@ -2273,7 +2702,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	}
 
 	for (i = 0; i < fexit->nr_links; i++)
-		invoke_bpf_prog(ctx, fexit->links[i], args_off, retval_off,
+		invoke_bpf_prog(ctx, fexit->links[i], bargs_off, retval_off,
 				run_ctx_off, false);
 
 	if (flags & BPF_TRAMP_F_CALL_ORIG) {
@@ -2287,7 +2716,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	}
 
 	if (flags & BPF_TRAMP_F_RESTORE_REGS)
-		restore_args(ctx, args_off, nregs);
+		restore_args(ctx, bargs_off, a->regs_for_args);
 
 	/* restore callee saved register x19 and x20 */
 	emit(A64_LDR64I(A64_R(19), A64_SP, regs_off), ctx);
@@ -2324,21 +2753,6 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	return ctx->idx;
 }
 
-static int btf_func_model_nregs(const struct btf_func_model *m)
-{
-	int nregs = m->nr_args;
-	int i;
-
-	/* extra registers needed for struct argument */
-	for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) {
-		/* The arg_size is at most 16 bytes, enforced by the verifier. */
-		if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG)
-			nregs += (m->arg_size[i] + 7) / 8 - 1;
-	}
-
-	return nregs;
-}
-
 int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
 			     struct bpf_tramp_links *tlinks, void *func_addr)
 {
@@ -2347,14 +2761,14 @@ int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
 		.idx = 0,
 	};
 	struct bpf_tramp_image im;
-	int nregs, ret;
+	struct arg_aux aaux;
+	int ret;
 
-	nregs = btf_func_model_nregs(m);
-	/* the first 8 registers are used for arguments */
-	if (nregs > 8)
-		return -ENOTSUPP;
+	ret = calc_arg_aux(m, &aaux);
+	if (ret < 0)
+		return ret;
 
-	ret = prepare_trampoline(&ctx, &im, tlinks, func_addr, nregs, flags);
+	ret = prepare_trampoline(&ctx, &im, tlinks, func_addr, m, &aaux, flags);
 	if (ret < 0)
 		return ret;
 
@@ -2381,9 +2795,10 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *ro_image,
 				u32 flags, struct bpf_tramp_links *tlinks,
 				void *func_addr)
 {
-	int ret, nregs;
-	void *image, *tmp;
 	u32 size = ro_image_end - ro_image;
+	struct arg_aux aaux;
+	void *image, *tmp;
+	int ret;
 
 	/* image doesn't need to be in module memory range, so we can
 	 * use kvmalloc.
@@ -2399,13 +2814,12 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *ro_image,
 		.write = true,
 	};
 
-	nregs = btf_func_model_nregs(m);
-	/* the first 8 registers are used for arguments */
-	if (nregs > 8)
-		return -ENOTSUPP;
 
 	jit_fill_hole(image, (unsigned int)(ro_image_end - ro_image));
-	ret = prepare_trampoline(&ctx, im, tlinks, func_addr, nregs, flags);
+	ret = calc_arg_aux(m, &aaux);
+	if (ret)
+		goto out;
+	ret = prepare_trampoline(&ctx, im, tlinks, func_addr, m, &aaux, flags);
 
 	if (ret > 0 && validate_code(&ctx) < 0) {
 		ret = -EINVAL;
@@ -2421,7 +2835,6 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *ro_image,
 		goto out;
 	}
 
-	bpf_flush_icache(ro_image, ro_image + size);
 out:
 	kvfree(image);
 	return ret;
@@ -2521,8 +2934,9 @@ static int gen_branch_or_nop(enum aarch64_insn_branch_type type, void *ip,
  * The dummy_tramp is used to prevent another CPU from jumping to unknown
  * locations during the patching process, making the patching process easier.
  */
-int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type poke_type,
-		       void *old_addr, void *new_addr)
+int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type old_t,
+		       enum bpf_text_poke_type new_t, void *old_addr,
+		       void *new_addr)
 {
 	int ret;
 	u32 old_insn;
@@ -2566,14 +2980,13 @@ int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type poke_type,
 		    !poking_bpf_entry))
 		return -EINVAL;
 
-	if (poke_type == BPF_MOD_CALL)
-		branch_type = AARCH64_INSN_BRANCH_LINK;
-	else
-		branch_type = AARCH64_INSN_BRANCH_NOLINK;
-
+	branch_type = old_t == BPF_MOD_CALL ? AARCH64_INSN_BRANCH_LINK :
+					      AARCH64_INSN_BRANCH_NOLINK;
 	if (gen_branch_or_nop(branch_type, ip, old_addr, plt, &old_insn) < 0)
 		return -EFAULT;
 
+	branch_type = new_t == BPF_MOD_CALL ? AARCH64_INSN_BRANCH_LINK :
+					      AARCH64_INSN_BRANCH_NOLINK;
 	if (gen_branch_or_nop(branch_type, ip, new_addr, plt, &new_insn) < 0)
 		return -EFAULT;
 
@@ -2652,7 +3065,7 @@ bool bpf_jit_supports_exceptions(void)
 	/* We unwind through both kernel frames starting from within bpf_throw
 	 * call and BPF frames. Therefore we require FP unwinder to be enabled
 	 * to walk kernel frames and reach BPF frames in the stack trace.
-	 * ARM64 kernel is aways compiled with CONFIG_FRAME_POINTER=y
+	 * ARM64 kernel is always compiled with CONFIG_FRAME_POINTER=y
 	 */
 	return true;
 }
@@ -2669,7 +3082,8 @@ bool bpf_jit_supports_insn(struct bpf_insn *insn, bool in_arena)
 	switch (insn->code) {
 	case BPF_STX | BPF_ATOMIC | BPF_W:
 	case BPF_STX | BPF_ATOMIC | BPF_DW:
-		if (!cpus_have_cap(ARM64_HAS_LSE_ATOMICS))
+		if (!bpf_atomic_is_load_store(insn) &&
+		    !cpus_have_cap(ARM64_HAS_LSE_ATOMICS))
 			return false;
 	}
 	return true;
@@ -2680,6 +3094,22 @@ bool bpf_jit_supports_percpu_insn(void)
 	return true;
 }
 
+bool bpf_jit_bypass_spec_v4(void)
+{
+	/* In case of arm64, we rely on the firmware mitigation of Speculative
+	 * Store Bypass as controlled via the ssbd kernel parameter. Whenever
+	 * the mitigation is enabled, it works for all of the kernel code with
+	 * no need to provide any additional instructions. Therefore, skip
+	 * inserting nospec insns against Spectre v4.
+	 */
+	return true;
+}
+
+bool bpf_jit_supports_timed_may_goto(void)
+{
+	return true;
+}
+
 bool bpf_jit_inlines_helper_call(s32 imm)
 {
 	switch (imm) {
@@ -2697,6 +3127,8 @@ void bpf_jit_free(struct bpf_prog *prog)
 	if (prog->jited) {
 		struct arm64_jit_data *jit_data = prog->aux->jit_data;
 		struct bpf_binary_header *hdr;
+		void __percpu *priv_stack_ptr;
+		int priv_stack_alloc_sz;
 
 		/*
 		 * If we fail the final pass of JIT (from jit_subprogs),
@@ -2704,12 +3136,19 @@ void bpf_jit_free(struct bpf_prog *prog)
 		 * before freeing it.
 		 */
 		if (jit_data) {
-			bpf_arch_text_copy(&jit_data->ro_header->size, &jit_data->header->size,
-					   sizeof(jit_data->header->size));
+			bpf_jit_binary_pack_finalize(jit_data->ro_header, jit_data->header);
 			kfree(jit_data);
 		}
+		prog->bpf_func -= cfi_get_offset();
 		hdr = bpf_jit_binary_pack_hdr(prog);
 		bpf_jit_binary_pack_free(hdr, NULL);
+		priv_stack_ptr = prog->aux->priv_stack_ptr;
+		if (priv_stack_ptr) {
+			priv_stack_alloc_sz = round_up(prog->aux->stack_depth, 16) +
+					      2 * PRIV_STACK_GUARD_SZ;
+			priv_stack_check_guard(priv_stack_ptr, priv_stack_alloc_sz, prog);
+			free_percpu(prog->aux->priv_stack_ptr);
+		}
 		WARN_ON_ONCE(!bpf_prog_kallsyms_verify_off(prog));
 	}
 
diff --git a/arch/arm64/net/bpf_timed_may_goto.S b/arch/arm64/net/bpf_timed_may_goto.S
new file mode 100644
index 000000000000..894cfcd7b241
--- /dev/null
+++ b/arch/arm64/net/bpf_timed_may_goto.S
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2025 Puranjay Mohan <puranjay@kernel.org> */
+
+#include <linux/linkage.h>
+
+SYM_FUNC_START(arch_bpf_timed_may_goto)
+	/* Allocate stack space and emit frame record */
+	stp     x29, x30, [sp, #-64]!
+	mov     x29, sp
+
+	/* Save BPF registers R0 - R5 (x7, x0-x4)*/
+	stp	x7, x0, [sp, #16]
+	stp	x1, x2, [sp, #32]
+	stp	x3, x4, [sp, #48]
+
+	/*
+	 * Stack depth was passed in BPF_REG_AX (x9), add it to the BPF_FP
+	 * (x25) to get the pointer to count and timestamp and pass it as the
+	 * first argument in x0.
+	 *
+	 * Before generating the call to arch_bpf_timed_may_goto, the verifier
+	 * generates a load instruction using FP, i.e. REG_AX = *(u64 *)(FP -
+	 * stack_off_cnt), so BPF_REG_FP (x25) is always set up by the arm64
+	 * jit in this case.
+	 */
+	add	x0, x9, x25
+	bl	bpf_check_timed_may_goto
+	/* BPF_REG_AX(x9) will be stored into count, so move return value to it. */
+	mov	x9, x0
+
+	/* Restore BPF registers R0 - R5 (x7, x0-x4) */
+	ldp	x7, x0, [sp, #16]
+	ldp	x1, x2, [sp, #32]
+	ldp	x3, x4, [sp, #48]
+
+	/* Restore FP and LR */
+	ldp     x29, x30, [sp], #64
+
+	ret
+SYM_FUNC_END(arch_bpf_timed_may_goto)
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index eb17f59e543c..0fac75f01534 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -28,15 +28,19 @@ HAS_EPAN
 HAS_EVT
 HAS_FPMR
 HAS_FGT
+HAS_FGT2
 HAS_FPSIMD
 HAS_GCS
 HAS_GENERIC_AUTH
 HAS_GENERIC_AUTH_ARCH_QARMA3
 HAS_GENERIC_AUTH_ARCH_QARMA5
 HAS_GENERIC_AUTH_IMP_DEF
-HAS_GIC_CPUIF_SYSREGS
+HAS_GICV3_CPUIF
+HAS_GICV5_CPUIF
+HAS_GICV5_LEGACY
 HAS_GIC_PRIO_MASKING
 HAS_GIC_PRIO_RELAXED_SYNC
+HAS_ICH_HCR_EL2_TDIR
 HAS_HCR_NV1
 HAS_HCX
 HAS_LDAPR
@@ -44,10 +48,14 @@ HAS_LPA2
 HAS_LSE_ATOMICS
 HAS_MOPS
 HAS_NESTED_VIRT
+HAS_BBML2_NOABORT
 HAS_PAN
+HAS_PMUV3
 HAS_S1PIE
 HAS_S1POE
+HAS_SCTLR2
 HAS_RAS_EXTN
+HAS_RASV1P1_EXTN
 HAS_RNG
 HAS_SB
 HAS_STAGE2_FWB
@@ -57,6 +65,7 @@ HAS_TLB_RANGE
 HAS_VA52
 HAS_VIRT_HOST_EXTN
 HAS_WFXT
+HAS_XNX
 HAFT
 HW_DBM
 KVM_HVHE
@@ -66,6 +75,8 @@ MPAM
 MPAM_HCR
 MTE
 MTE_ASYMM
+MTE_FAR
+MTE_STORE_ONLY
 SME
 SME_FA64
 SME2
@@ -93,6 +104,7 @@ WORKAROUND_2457168
 WORKAROUND_2645198
 WORKAROUND_2658417
 WORKAROUND_AMPERE_AC03_CPU_38
+WORKAROUND_AMPERE_AC04_CPU_23
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
@@ -104,7 +116,9 @@ WORKAROUND_CAVIUM_TX2_219_TVM
 WORKAROUND_CLEAN_CACHE
 WORKAROUND_DEVICE_LOAD_ACQUIRE
 WORKAROUND_NVIDIA_CARMEL_CNP
+WORKAROUND_PMUV3_IMPDEF_TRAPS
 WORKAROUND_QCOM_FALKOR_E1003
+WORKAROUND_QCOM_ORYON_CNTVOFF
 WORKAROUND_REPEAT_TLBI
 WORKAROUND_SPECULATIVE_AT
 WORKAROUND_SPECULATIVE_SSBS
diff --git a/arch/arm64/tools/gen-sysreg.awk b/arch/arm64/tools/gen-sysreg.awk
index d1254a056114..86860ab672dc 100755
--- a/arch/arm64/tools/gen-sysreg.awk
+++ b/arch/arm64/tools/gen-sysreg.awk
@@ -44,21 +44,38 @@ function expect_fields(nf) {
 
 # Print a CPP macro definition, padded with spaces so that the macro bodies
 # line up in a column
-function define(name, val) {
-	printf "%-56s%s\n", "#define " name, val
+function define(prefix, name, val) {
+	printf "%-56s%s\n", "#define " prefix name, val
+}
+
+# Same as above, but without a prefix
+function define_reg(name, val) {
+	define(null, name, val)
 }
 
 # Print standard BITMASK/SHIFT/WIDTH CPP definitions for a field
-function define_field(reg, field, msb, lsb) {
-	define(reg "_" field, "GENMASK(" msb ", " lsb ")")
-	define(reg "_" field "_MASK", "GENMASK(" msb ", " lsb ")")
-	define(reg "_" field "_SHIFT", lsb)
-	define(reg "_" field "_WIDTH", msb - lsb + 1)
+function define_field(prefix, reg, field, msb, lsb) {
+	define(prefix, reg "_" field, "GENMASK(" msb ", " lsb ")")
+	define(prefix, reg "_" field "_MASK", "GENMASK(" msb ", " lsb ")")
+	define(prefix, reg "_" field "_SHIFT", lsb)
+	define(prefix, reg "_" field "_WIDTH", msb - lsb + 1)
 }
 
 # Print a field _SIGNED definition for a field
-function define_field_sign(reg, field, sign) {
-	define(reg "_" field "_SIGNED", sign)
+function define_field_sign(prefix, reg, field, sign) {
+	define(prefix, reg "_" field "_SIGNED", sign)
+}
+
+# Print the Res0, Res1, Unkn masks
+function define_resx_unkn(prefix, reg, res0, res1, unkn) {
+	if (res0 != null)
+		define(prefix, reg "_RES0", "(" res0 ")")
+	if (res1 != null)
+		define(prefix, reg "_RES1", "(" res1 ")")
+	if (unkn != null)
+		define(prefix, reg "_UNKN", "(" unkn ")")
+	if (res0 != null || res1 != null || unkn != null)
+		print ""
 }
 
 # Parse a "<msb>[:<lsb>]" string into the global variables @msb and @lsb
@@ -111,7 +128,7 @@ END {
 /^$/ { next }
 /^[\t ]*#/ { next }
 
-/^SysregFields/ && block_current() == "Root" {
+$1 == "SysregFields" && block_current() == "Root" {
 	block_push("SysregFields")
 
 	expect_fields(2)
@@ -122,19 +139,23 @@ END {
 	res1 = "UL(0)"
 	unkn = "UL(0)"
 
+	if (reg in defined_fields)
+		fatal("Duplicate SysregFields definition for " reg)
+	defined_fields[reg] = 1
+
 	next_bit = 63
 
+	delete seen_prefixes
+
 	next
 }
 
-/^EndSysregFields/ && block_current() == "SysregFields" {
-	if (next_bit > 0)
+$1 == "EndSysregFields" && block_current() == "SysregFields" {
+	expect_fields(1)
+	if (next_bit >= 0)
 		fatal("Unspecified bits in " reg)
 
-	define(reg "_RES0", "(" res0 ")")
-	define(reg "_RES1", "(" res1 ")")
-	define(reg "_UNKN", "(" unkn ")")
-	print ""
+	define_resx_unkn(prefix, reg, res0, res1, unkn)
 
 	reg = null
 	res0 = null
@@ -145,7 +166,7 @@ END {
 	next
 }
 
-/^Sysreg/ && block_current() == "Root" {
+$1 == "Sysreg" && block_current() == "Root" {
 	block_push("Sysreg")
 
 	expect_fields(7)
@@ -161,34 +182,35 @@ END {
 	res1 = "UL(0)"
 	unkn = "UL(0)"
 
-	define("REG_" reg, "S" op0 "_" op1 "_C" crn "_C" crm "_" op2)
-	define("SYS_" reg, "sys_reg(" op0 ", " op1 ", " crn ", " crm ", " op2 ")")
+	if (reg in defined_regs)
+		fatal("Duplicate Sysreg definition for " reg)
+	defined_regs[reg] = 1
+
+	define_reg("REG_" reg, "S" op0 "_" op1 "_C" crn "_C" crm "_" op2)
+	define_reg("SYS_" reg, "sys_reg(" op0 ", " op1 ", " crn ", " crm ", " op2 ")")
 
-	define("SYS_" reg "_Op0", op0)
-	define("SYS_" reg "_Op1", op1)
-	define("SYS_" reg "_CRn", crn)
-	define("SYS_" reg "_CRm", crm)
-	define("SYS_" reg "_Op2", op2)
+	define_reg("SYS_" reg "_Op0", op0)
+	define_reg("SYS_" reg "_Op1", op1)
+	define_reg("SYS_" reg "_CRn", crn)
+	define_reg("SYS_" reg "_CRm", crm)
+	define_reg("SYS_" reg "_Op2", op2)
 
 	print ""
 
+	prefix = null
 	next_bit = 63
 
+	delete seen_prefixes
+
 	next
 }
 
-/^EndSysreg/ && block_current() == "Sysreg" {
-	if (next_bit > 0)
+$1 == "EndSysreg" && block_current() == "Sysreg" {
+	expect_fields(1)
+	if (next_bit >= 0)
 		fatal("Unspecified bits in " reg)
 
-	if (res0 != null)
-		define(reg "_RES0", "(" res0 ")")
-	if (res1 != null)
-		define(reg "_RES1", "(" res1 ")")
-	if (unkn != null)
-		define(reg "_UNKN", "(" unkn ")")
-	if (res0 != null || res1 != null || unkn != null)
-		print ""
+	define_resx_unkn(prefix, reg, res0, res1, unkn)
 
 	reg = null
 	op0 = null
@@ -199,6 +221,7 @@ END {
 	res0 = null
 	res1 = null
 	unkn = null
+	prefix = null
 
 	block_pop()
 	next
@@ -206,7 +229,7 @@ END {
 
 # Currently this is effectivey a comment, in future we may want to emit
 # defines for the fields.
-/^Fields/ && block_current() == "Sysreg" {
+($1 == "Fields" || $1 == "Mapping") && block_current() == "Sysreg" {
 	expect_fields(2)
 
 	if (next_bit != 63)
@@ -215,7 +238,7 @@ END {
 	print "/* For " reg " fields see " $2 " */"
 	print ""
 
-        next_bit = 0
+	next_bit = -1
 	res0 = null
 	res1 = null
 	unkn = null
@@ -223,8 +246,7 @@ END {
 	next
 }
 
-
-/^Res0/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+$1 == "Res0" && (block_current() == "Sysreg" || block_current() == "SysregFields" || block_current() == "Prefix") {
 	expect_fields(2)
 	parse_bitdef(reg, "RES0", $2)
 	field = "RES0_" msb "_" lsb
@@ -234,7 +256,7 @@ END {
 	next
 }
 
-/^Res1/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+$1 == "Res1" && (block_current() == "Sysreg" || block_current() == "SysregFields" || block_current() == "Prefix") {
 	expect_fields(2)
 	parse_bitdef(reg, "RES1", $2)
 	field = "RES1_" msb "_" lsb
@@ -244,7 +266,7 @@ END {
 	next
 }
 
-/^Unkn/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+$1 == "Unkn" && (block_current() == "Sysreg" || block_current() == "SysregFields" || block_current() == "Prefix") {
 	expect_fields(2)
 	parse_bitdef(reg, "UNKN", $2)
 	field = "UNKN_" msb "_" lsb
@@ -254,69 +276,78 @@ END {
 	next
 }
 
-/^Field/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+$1 == "Field" && (block_current() == "Sysreg" || block_current() == "SysregFields" || block_current() == "Prefix") {
 	expect_fields(3)
 	field = $3
 	parse_bitdef(reg, field, $2)
 
-	define_field(reg, field, msb, lsb)
+	define_field(prefix, reg, field, msb, lsb)
 	print ""
 
 	next
 }
 
-/^Raz/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+$1 == "Raz" && (block_current() == "Sysreg" || block_current() == "SysregFields" || block_current() == "Prefix") {
 	expect_fields(2)
 	parse_bitdef(reg, field, $2)
 
 	next
 }
 
-/^SignedEnum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+$1 == "SignedEnum" && (block_current() == "Sysreg" || block_current() == "SysregFields" || block_current() == "Prefix") {
 	block_push("Enum")
 
 	expect_fields(3)
 	field = $3
 	parse_bitdef(reg, field, $2)
 
-	define_field(reg, field, msb, lsb)
-	define_field_sign(reg, field, "true")
+	define_field(prefix, reg, field, msb, lsb)
+	define_field_sign(prefix, reg, field, "true")
+
+	delete seen_enum_vals
 
 	next
 }
 
-/^UnsignedEnum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+$1 == "UnsignedEnum" && (block_current() == "Sysreg" || block_current() == "SysregFields" || block_current() == "Prefix") {
 	block_push("Enum")
 
 	expect_fields(3)
 	field = $3
 	parse_bitdef(reg, field, $2)
 
-	define_field(reg, field, msb, lsb)
-	define_field_sign(reg, field, "false")
+	define_field(prefix, reg, field, msb, lsb)
+	define_field_sign(prefix, reg, field, "false")
+
+	delete seen_enum_vals
 
 	next
 }
 
-/^Enum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+$1 == "Enum" && (block_current() == "Sysreg" || block_current() == "SysregFields" || block_current() == "Prefix") {
 	block_push("Enum")
 
 	expect_fields(3)
 	field = $3
 	parse_bitdef(reg, field, $2)
 
-	define_field(reg, field, msb, lsb)
+	define_field(prefix, reg, field, msb, lsb)
+
+	delete seen_enum_vals
 
 	next
 }
 
-/^EndEnum/ && block_current() == "Enum" {
+$1 == "EndEnum" && block_current() == "Enum" {
+	expect_fields(1)
 
 	field = null
 	msb = null
 	lsb = null
 	print ""
 
+	delete seen_enum_vals
+
 	block_pop()
 	next
 }
@@ -326,7 +357,51 @@ END {
 	val = $1
 	name = $2
 
-	define(reg "_" field "_" name, "UL(" val ")")
+	if (val in seen_enum_vals)
+		fatal("Duplicate Enum value " val " for " name)
+	seen_enum_vals[val] = 1
+
+	define(prefix, reg "_" field "_" name, "UL(" val ")")
+	next
+}
+
+$1 == "Prefix" && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	block_push("Prefix")
+
+	expect_fields(2)
+
+	if (next_bit < 63)
+		fatal("Prefixed fields must precede non-prefixed fields (" reg ")")
+
+	prefix = $2 "_"
+
+	if (prefix in seen_prefixes)
+		fatal("Duplicate prefix " prefix " for " reg)
+	seen_prefixes[prefix] = 1
+
+	res0 = "UL(0)"
+	res1 = "UL(0)"
+	unkn = "UL(0)"
+	next_bit = 63
+
+	next
+}
+
+$1 == "EndPrefix" && block_current() == "Prefix" {
+	expect_fields(1)
+	if (next_bit >= 0)
+		fatal("Unspecified bits in prefix " prefix " for " reg)
+
+	define_resx_unkn(prefix, reg, res0, res1, unkn)
+
+	prefix = null
+	res0 = "UL(0)"
+	res1 = "UL(0)"
+	unkn = "UL(0)"
+	next_bit = 63
+
+	block_pop()
+
 	next
 }
 
diff --git a/arch/arm64/tools/syscall_32.tbl b/arch/arm64/tools/syscall_32.tbl
index 69a829912a05..8cdfe5d4dac9 100644
--- a/arch/arm64/tools/syscall_32.tbl
+++ b/arch/arm64/tools/syscall_32.tbl
@@ -478,3 +478,7 @@
 464	common	getxattrat			sys_getxattrat
 465	common	listxattrat			sys_listxattrat
 466	common	removexattrat			sys_removexattrat
+467	common	open_tree_attr			sys_open_tree_attr
+468	common	file_getattr			sys_file_getattr
+469	common	file_setattr			sys_file_setattr
+470	common	listns				sys_listns
diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg
index b081b54d6d22..8921b51866d6 100644
--- a/arch/arm64/tools/sysreg
+++ b/arch/arm64/tools/sysreg
@@ -24,8 +24,16 @@
 #	...
 # EndEnum
 
-# Alternatively if multiple registers share the same layout then
-# a SysregFields block can be used to describe the shared layout
+# For VHE aliases (*_EL12, *_EL02) of system registers, a Mapping
+# entry describes the register the alias actually accesses:
+
+# Sysreg 	<name_EL12>	<op0> 	<op1>	<crn>	<crm>	<op2>
+# Mapping	<name_EL1>
+# EndSysreg
+
+# Where multiple system registers are not VHE aliases but share a
+# common layout, a SysregFields block can be used to describe the
+# shared layout:
 
 # SysregFields	<fieldsname>
 # <field>
@@ -46,7 +54,7 @@
 #
 # In general it is recommended that new enumeration items be named for the
 # feature that introduces them (eg, FEAT_LS64_ACCDATA introduces enumeration
-# item ACCDATA) though it may be more taseful to do something else.
+# item ACCDATA) though it may be more tasteful to do something else.
 
 Sysreg	OSDTRRX_EL1	2	0	0	0	2
 Res0	63:32
@@ -93,6 +101,17 @@ Res0	63:32
 Field	31:0	DTRTX
 EndSysreg
 
+Sysreg	MDSELR_EL1	2	0	0	4	2
+Res0	63:6
+Field	5:4	BANK
+Res0	3:0
+EndSysreg
+
+Sysreg	MDSTEPOP_EL1	2	0	0	5	2
+Res0	63:32
+Field	31:0	OPCODE
+EndSysreg
+
 Sysreg	OSECCR_EL1	2	0	0	6	2
 Res0	63:32
 Field	31:0	EDECCR
@@ -103,6 +122,285 @@ Res0	63:1
 Field	0	OSLK
 EndSysreg
 
+Sysreg	SPMACCESSR_EL1	2	0	9	13	3
+UnsignedEnum	63:62	P31
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	61:60	P30
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	59:58	P29
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	57:56	P28
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	55:54	P27
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	53:52	P26
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	51:50	P25
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	49:48	P24
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	47:46	P23
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	45:44	P22
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	43:42	P21
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	41:40	P20
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	39:38	P19
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	37:36	P18
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	35:34	P17
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	33:32	P16
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	31:30	P15
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	29:28	P14
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	27:26	P13
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	25:24	P12
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	23:22	P11
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	21:20	P10
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	19:18	P9
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	17:16	P8
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	15:14	P7
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	13:12	P6
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	11:10	P5
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	9:8	P4
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	7:6	P3
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	5:4	P2
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	3:2	P1
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+UnsignedEnum	1:0	P0
+	0b00	TRAP_RW
+	0b01	TRAP_W
+	0b11	NOTRAP
+EndEnum
+EndSysreg
+
+Sysreg	SPMACCESSR_EL12	2	5	9	13	3
+Mapping	SPMACCESSR_EL1
+EndSysreg
+
+Sysreg	SPMIIDR_EL1	2	0	9	13	4
+Res0	63:32
+Field	31:20	ProductID
+Field	19:16	Variant
+Field	15:12	Revision
+Field	11:0	Implementer
+EndSysreg
+
+Sysreg	SPMDEVARCH_EL1	2	0	9	13	5
+Res0	63:32
+Field	31:21	ARCHITECT
+Field	20	PRESENT
+Field	19:16	REVISION
+Field	15:12	ARCHVER
+Field	11:0	ARCHPART
+EndSysreg
+
+Sysreg	SPMDEVAFF_EL1	2	0	9	13	6
+Res0	63:40
+Field	39:32	Aff3
+Field	31	F0V
+Field	30	U
+Res0	29:25
+Field	24	MT
+Field	23:16	Aff2
+Field	15:8	Aff1
+Field	7:0	Aff0
+EndSysreg
+
+Sysreg	SPMCFGR_EL1	2	0	9	13	7
+Res0	63:32
+Field	31:28	NCG
+Res0	27:25
+Field	24	HDBG
+Field	23	TRO
+Field	22	SS
+Field	21	FZO
+Field	20	MSI
+Field	19	RAO
+Res0	18
+Field	17	NA
+Field	16	EX
+Field	15:14	RAZ
+Field	13:8	SIZE
+Field	7:0	N
+EndSysreg
+
+Sysreg	SPMINTENSET_EL1	2	0	9	14	1
+Field	63:0	P
+EndSysreg
+
+Sysreg	SPMINTENCLR_EL1	2	0	9	14	2
+Field	63:0	P
+EndSysreg
+
+Sysreg	PMCCNTSVR_EL1	2	0	14	11	7
+Field	63:0	CCNT
+EndSysreg
+
+Sysreg	PMICNTSVR_EL1	2	0	14	12	0
+Field	63:0	ICNT
+EndSysreg
+
+Sysreg	SPMCR_EL0	2	3	9	12	0
+Res0	63:12
+Field	11	TRO
+Field	10	HDBG
+Field	9	FZO
+Field	8	NA
+Res0	7:5
+Field	4	EX
+Res0	3:2
+Field	1	P
+Field	0	E
+EndSysreg
+
+Sysreg	SPMCNTENSET_EL0	2	3	9	12	1
+Field	63:0	P
+EndSysreg
+
+Sysreg	SPMCNTENCLR_EL0	2	3	9	12	2
+Field	63:0	P
+EndSysreg
+
+Sysreg	SPMOVSCLR_EL0	2	3	9	12	3
+Field	63:0	P
+EndSysreg
+
+Sysreg	SPMZR_EL0       2	3	9	12	4
+Field   63:0      P
+EndSysreg
+
+Sysreg	SPMSELR_EL0	2	3	9	12	5
+Res0	63:10
+Field	9:4	SYSPMUSEL
+Res0	3:2
+Field	1:0	BANK
+EndSysreg
+
+Sysreg	SPMOVSSET_EL0	2	3	9	14	3
+Field	63:0	P
+EndSysreg
+
+Sysreg	SPMSCR_EL1	2	7	9	14	7
+Field	63:32	IMPDEF
+Field	31	RAO
+Res0	30:5
+Field	4	NAO
+Res0	3:1
+Field	0	SO
+EndSysreg
+
 Sysreg ID_PFR0_EL1	3	0	0	1	0
 Res0	63:32
 UnsignedEnum	31:28	RAS
@@ -176,7 +474,7 @@ EndEnum
 Enum	7:4	Security
 	0b0000	NI
 	0b0001	EL3
-	0b0001	NSACR_RFR
+	0b0010	NSACR_RFR
 EndEnum
 UnsignedEnum	3:0	ProgMod
 	0b0000	NI
@@ -899,6 +1197,7 @@ UnsignedEnum	31:28	RAS
 	0b0000	NI
 	0b0001	IMP
 	0b0010	V1P1
+	0b0011	V2
 EndEnum
 UnsignedEnum	27:24	GIC
 	0b0000	NI
@@ -1010,7 +1309,15 @@ UnsignedEnum	35:32	FPMR
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-Res0	31:12
+Res0	31:20
+UnsignedEnum	19:16	UINJ
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	GCIE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	11:8	MTEFAR
 	0b0000	NI
 	0b0001	IMP
@@ -1025,6 +1332,138 @@ UnsignedEnum	3:0	MTEPERM
 EndEnum
 EndSysreg
 
+
+SysregFields BRBINFx_EL1
+Res0	63:47
+Field	46	CCU
+Field	45:40	CC_EXP
+Field	39:32	CC_MANT
+Res0	31:18
+Field	17	LASTFAILED
+Field	16	T
+Res0	15:14
+Enum	13:8		TYPE
+	0b000000	DIRECT_UNCOND
+	0b000001	INDIRECT
+	0b000010	DIRECT_LINK
+	0b000011	INDIRECT_LINK
+	0b000101	RET
+	0b000111	ERET
+	0b001000	DIRECT_COND
+	0b100001	DEBUG_HALT
+	0b100010	CALL
+	0b100011	TRAP
+	0b100100	SERROR
+	0b100110	INSN_DEBUG
+	0b100111	DATA_DEBUG
+	0b101010	ALIGN_FAULT
+	0b101011	INSN_FAULT
+	0b101100	DATA_FAULT
+	0b101110	IRQ
+	0b101111	FIQ
+	0b110000	IMPDEF_TRAP_EL3
+	0b111001	DEBUG_EXIT
+EndEnum
+Enum	7:6	EL
+	0b00	EL0
+	0b01	EL1
+	0b10	EL2
+	0b11	EL3
+EndEnum
+Field	5	MPRED
+Res0	4:2
+Enum	1:0	VALID
+	0b00	NONE
+	0b01	TARGET
+	0b10	SOURCE
+	0b11	FULL
+EndEnum
+EndSysregFields
+
+SysregFields	BRBCR_ELx
+Res0	63:24
+Field	23 	EXCEPTION
+Field	22 	ERTN
+Res0	21:10
+Field	9	FZPSS
+Field	8 	FZP
+Res0	7
+Enum	6:5	TS
+	0b01	VIRTUAL
+	0b10	GUEST_PHYSICAL
+	0b11	PHYSICAL
+EndEnum
+Field	4	MPRED
+Field	3	CC
+Res0	2
+Field	1	ExBRE
+Field	0	E0BRE
+EndSysregFields
+
+Sysreg	BRBCR_EL1	2	1	9	0	0
+Fields	BRBCR_ELx
+EndSysreg
+
+Sysreg	BRBFCR_EL1	2	1	9	0	1
+Res0	63:30
+Enum	29:28	BANK
+	0b00	BANK_0
+	0b01	BANK_1
+EndEnum
+Res0	27:23
+Field	22	CONDDIR
+Field	21	DIRCALL
+Field	20	INDCALL
+Field	19	RTN
+Field	18	INDIRECT
+Field	17	DIRECT
+Field	16	EnI
+Res0	15:8
+Field	7	PAUSED
+Field	6	LASTFAILED
+Res0	5:0
+EndSysreg
+
+Sysreg	BRBTS_EL1	2	1	9	0	2
+Field	63:0	TS
+EndSysreg
+
+Sysreg	BRBINFINJ_EL1	2	1	9	1	0
+Fields BRBINFx_EL1
+EndSysreg
+
+Sysreg	BRBSRCINJ_EL1	2	1	9	1	1
+Field	63:0 ADDRESS
+EndSysreg
+
+Sysreg	BRBTGTINJ_EL1	2	1	9	1	2
+Field	63:0 ADDRESS
+EndSysreg
+
+Sysreg	BRBIDR0_EL1	2	1	9	2	0
+Res0	63:16
+Enum	15:12	CC
+	0b0101	20_BIT
+EndEnum
+Enum	11:8	FORMAT
+	0b0000	FORMAT_0
+EndEnum
+Enum	7:0		NUMREC
+	0b00001000	8
+	0b00010000	16
+	0b00100000	32
+	0b01000000	64
+EndEnum
+EndSysreg
+
+Sysreg	BRBCR_EL2	2	4	9	0	0
+Fields	BRBCR_ELx
+EndSysreg
+
+Sysreg	BRBCR_EL12	2	5	9	0	0
+Fields	BRBCR_ELx
+EndSysreg
+
 Sysreg	ID_AA64ZFR0_EL1	3	0	0	4	4
 Res0	63:60
 UnsignedEnum	59:56	F64MM
@@ -1035,7 +1474,10 @@ UnsignedEnum	55:52	F32MM
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-Res0	51:48
+UnsignedEnum	51:48	F16MM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	47:44	I8MM
 	0b0000	NI
 	0b0001	IMP
@@ -1053,6 +1495,7 @@ Res0	31:28
 UnsignedEnum	27:24	B16B16
 	0b0000	NI
 	0b0001	IMP
+	0b0010	BFSCALE
 EndEnum
 UnsignedEnum	23:20	BF16
 	0b0000	NI
@@ -1063,16 +1506,22 @@ UnsignedEnum	19:16	BitPerm
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-Res0	15:8
+UnsignedEnum	15:12	EltPerm
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	11:8
 UnsignedEnum	7:4	AES
 	0b0000	NI
 	0b0001	IMP
 	0b0010	PMULL128
+	0b0011	AES2
 EndEnum
 UnsignedEnum	3:0	SVEver
 	0b0000	IMP
 	0b0001	SVE2
 	0b0010	SVE2p1
+	0b0011	SVE2p2
 EndEnum
 EndSysreg
 
@@ -1090,7 +1539,7 @@ UnsignedEnum	59:56	SMEver
 	0b0000	SME
 	0b0001	SME2
 	0b0010	SME2p1
-	0b0000	IMP
+	0b0011	SME2p2
 EndEnum
 UnsignedEnum	55:52	I16I64
 	0b0000	NI
@@ -1154,7 +1603,29 @@ UnsignedEnum	28	SF8DP2
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	27:0
+Res0	27:26
+UnsignedEnum	25	SBitPerm
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	24	AES
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	23	SFEXPA
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	22:17
+UnsignedEnum	16	STMOP
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	15:1
+UnsignedEnum	0	SMOP4
+	0b0	NI
+	0b1	IMP
+EndEnum
 EndSysreg
 
 Sysreg	ID_AA64FPFR0_EL1	3	0	0	4	7
@@ -1175,7 +1646,15 @@ UnsignedEnum	28	F8DP2
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	27:2
+UnsignedEnum	27	F8MM8
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	26	F8MM4
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	25:2
 UnsignedEnum	1	F8E4M3
 	0b0	NI
 	0b1	IMP
@@ -1214,7 +1693,7 @@ UnsignedEnum	43:40	TraceFilt
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-UnsignedEnum	39:36	DoubleLock
+SignedEnum	39:36	DoubleLock
 	0b0000	IMP
 	0b1111	NI
 EndEnum
@@ -1413,6 +1892,7 @@ UnsignedEnum	63:60	LS64
 	0b0001	LS64
 	0b0010	LS64_V
 	0b0011	LS64_ACCDATA
+	0b0100	LS64WB
 EndEnum
 UnsignedEnum	59:56	XS
 	0b0000	NI
@@ -1503,12 +1983,16 @@ EndEnum
 UnsignedEnum	55:52	CSSC
 	0b0000	NI
 	0b0001	IMP
+	0b0010	CMPBR
 EndEnum
 UnsignedEnum	51:48	RPRFM
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-Res0	47:44
+UnsignedEnum	47:44	PCDPHINT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	43:40	PRFMSLC
 	0b0000	NI
 	0b0001	IMP
@@ -1561,7 +2045,23 @@ EndEnum
 EndSysreg
 
 Sysreg	ID_AA64ISAR3_EL1	3	0	0	6	3
-Res0	63:16
+Res0	63:32
+UnsignedEnum	31:28	FPRCVT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	LSUI
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	23:20	OCCMO
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	19:16	LSFE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	15:12	PACM
 	0b0000	NI
 	0b0001	TRIVIAL_IMP
@@ -1591,6 +2091,7 @@ EndEnum
 UnsignedEnum	59:56	FGT
 	0b0000	NI
 	0b0001	IMP
+	0b0010	FGT2
 EndEnum
 Res0	55:48
 UnsignedEnum	47:44	EXS
@@ -1652,6 +2153,7 @@ Enum	3:0	PARANGE
 	0b0100	44
 	0b0101	48
 	0b0110	52
+	0b0111	56
 EndEnum
 EndSysreg
 
@@ -1870,12 +2372,21 @@ EndEnum
 EndSysreg
 
 Sysreg	ID_AA64MMFR4_EL1	3	0	0	7	4
-Res0	63:40
+Res0	63:48
+UnsignedEnum	47:44	SRMASK
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	43:40
 UnsignedEnum	39:36	E3DSE
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-Res0	35:28
+Res0	35:32
+UnsignedEnum	31:28	RMEGDI
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 SignedEnum	27:24	E2H0
 	0b0000	IMP
 	0b1110	NI_NV1
@@ -1884,6 +2395,7 @@ EndEnum
 UnsignedEnum	23:20	NV_frac
 	0b0000	NV_NV2
 	0b0001	NV2_ONLY
+	0b0010	NV2P1
 EndEnum
 UnsignedEnum	19:16	FGWTE3
 	0b0000	NI
@@ -1897,13 +2409,16 @@ UnsignedEnum	11:8	ASID2
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-SignedEnum	7:4	EIESB
+UnsignedEnum	7:4	EIESB
 	0b0000	NI
 	0b0001	ToEL3
 	0b0010	ToELx
 	0b1111	ANY
 EndEnum
-Res0	3:0
+UnsignedEnum	3:0	PoPS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 EndSysreg
 
 Sysreg	SCTLR_EL1	3	0	1	0	0
@@ -1978,8 +2493,30 @@ Field	1	A
 Field	0	M
 EndSysreg
 
-SysregFields	CPACR_ELx
-Res0	63:30
+Sysreg	SCTLR_EL12      3	5	1	0	0
+Mapping	SCTLR_EL1
+EndSysreg
+
+Sysreg	SCTLRALIAS_EL1  3	0	1	4	6
+Mapping	SCTLR_EL1
+EndSysreg
+
+Sysreg	ACTLR_EL1	3	0	1	0	1
+Field   63:0    IMPDEF
+EndSysreg
+
+Sysreg	ACTLR_EL12      3	5	1	0	1
+Mapping	ACTLR_EL1
+EndSysreg
+
+Sysreg	ACTLRALIAS_EL1  3	0	1	4	5
+Mapping	ACTLR_EL1
+EndSysreg
+
+Sysreg	CPACR_EL1	3	0	1	0	2
+Res0	63:32
+Field	31	TCPAC
+Field	30	TAM
 Field	29	E0POE
 Field	28	TTA
 Res0	27:26
@@ -1989,10 +2526,337 @@ Field	21:20	FPEN
 Res0	19:18
 Field	17:16	ZEN
 Res0	15:0
-EndSysregFields
+EndSysreg
 
-Sysreg	CPACR_EL1	3	0	1	0	2
-Fields	CPACR_ELx
+Sysreg	CPACRALIAS_EL1  3	0	1	4	4
+Mapping	CPACR_EL1
+EndSysreg
+
+Sysreg	ACTLRMASK_EL1	3	0	1	4	1
+Field	63:0	IMPDEF
+EndSysreg
+
+Sysreg	ACTLRMASK_EL12	3	5	1	4	1
+Mapping	ACTLRMASK_EL1
+EndSysreg
+
+Sysreg	CPACRMASK_EL1	3	0	1	4	2
+Res0	63:32
+Field	31	TCPAC
+Field	30	TAM
+Field	29	E0POE
+Field	28	TTA
+Res0	27:25
+Field	24	SMEN
+Res0	23:21
+Field	20	FPEN
+Res0	19:17
+Field	16	ZEN
+Res0	15:0
+EndSysreg
+
+Sysreg	CPACRMASK_EL12	3	5	1	4	2
+Mapping CPACRMASK_EL1
+EndSysreg
+
+Sysreg	PFAR_EL1	3	0	6	0	5
+Field	63	NS
+Field	62	NSE
+Res0	61:56
+Field	55:52	PA_55_52
+Field	51:48	PA_51_48
+Field	47:0	PA
+EndSysreg
+
+Sysreg	PFAR_EL12	3	5	6	0	5
+Mapping	PFAR_EL1
+EndSysreg
+
+Sysreg	SCTLR2_EL1      3	0	1	0	3
+Res0    63:13
+Field   12      CPTM0
+Field   11      CPTM
+Field   10      CPTA0
+Field   9       CPTA
+Field   8       EnPACM0
+Field   7       EnPACM
+Field   6       EnIDCP128
+Field   5       EASE
+Field   4       EnANERR
+Field   3       EnADERR
+Field   2       NMEA
+Res0    1:0
+EndSysreg
+
+Sysreg	SCTLR2_EL12     3	5	1	0	3
+Mapping	SCTLR2_EL1
+EndSysreg
+
+Sysreg	SCTLR2ALIAS_EL1 3	0	1	4	7
+Mapping	SCTLR2_EL1
+EndSysreg
+
+Sysreg	SCTLR2MASK_EL1	3	0	1	4	3
+Res0	63:13
+Field	12	CPTM0
+Field	11	CPTM
+Field	10	CPTA0
+Field	9	CPTA
+Field	8	EnPACM0
+Field	7	EnPACM
+Field	6	EnIDCP128
+Field	5	EASE
+Field	4	EnANERR
+Field	3	EnADERR
+Field	2	NMEA
+Res0	1:0
+EndSysreg
+
+Sysreg	SCTLR2MASK_EL12	3	5	1	4	3
+Mapping	SCTLR2MASK_EL1
+EndSysreg
+
+Sysreg	SCTLRMASK_EL1	3	0	1	4	0
+Field	63	TIDCP
+Field	62	SPINTMASK
+Field	61	NMI
+Field	60	EnTP2
+Field	59	TCSO
+Field	58	TCSO0
+Field	57	EPAN
+Field	56	EnALS
+Field	55	EnAS0
+Field	54	EnASR
+Field	53	TME
+Field	52	TME0
+Field	51	TMT
+Field	50	TMT0
+Res0	49:47
+Field	46	TWEDEL
+Field	45	TWEDEn
+Field	44	DSSBS
+Field	43	ATA
+Field	42	ATA0
+Res0	41
+Field	40	TCF
+Res0	39
+Field	38	TCF0
+Field	37	ITFSB
+Field	36	BT1
+Field	35	BT0
+Field	34	EnFPM
+Field	33	MSCEn
+Field	32	CMOW
+Field	31	EnIA
+Field	30	EnIB
+Field	29	LSMAOE
+Field	28	nTLSMD
+Field	27	EnDA
+Field	26	UCI
+Field	25	EE
+Field	24	E0E
+Field	23	SPAN
+Field	22	EIS
+Field	21	IESB
+Field	20	TSCXT
+Field	19	WXN
+Field	18	nTWE
+Res0	17
+Field	16	nTWI
+Field	15	UCT
+Field	14	DZE
+Field	13	EnDB
+Field	12	I
+Field	11	EOS
+Field	10	EnRCTX
+Field	9	UMA
+Field	8	SED
+Field	7	ITD
+Field	6	nAA
+Field	5	CP15BEN
+Field	4	SA0
+Field	3	SA
+Field	2	C
+Field	1	A
+Field	0	M
+EndSysreg
+
+Sysreg	SCTLRMASK_EL12	3	5	1	4	0
+Mapping	SCTLRMASK_EL1
+EndSysreg
+
+Sysreg	TCR2MASK_EL1	3	0	2	7	3
+Res0	63:22
+Field	21	FNGNA1
+Field	20	FNGNA0
+Res0	19
+Field	18	FNG1
+Field	17	FNG0
+Field	16	A2
+Field	15	DisCH1
+Field	14	DisCH0
+Res0	13:12
+Field	11	HAFT
+Field	10	PTTWI
+Res0	9:6
+Field	5	D128
+Field	4	AIE
+Field	3	POE
+Field	2	E0POE
+Field	1	PIE
+Field	0	PnCH
+EndSysreg
+
+Sysreg	TCR2MASK_EL12	3	5	2	7	3
+Mapping	TCR2MASK_EL1
+EndSysreg
+
+Sysreg	TCRMASK_EL1	3	0	2	7	2
+Res0	63:62
+Field	61	MTX1
+Field	60	MTX0
+Field	59	DS
+Field	58	TCMA1
+Field	57	TCMA0
+Field	56	E0PD1
+Field	55	E0PD0
+Field	54	NFD1
+Field	53	NFD0
+Field	52	TBID1
+Field	51	TBID0
+Field	50	HWU162
+Field	49	HWU161
+Field	48	HWU160
+Field	47	HWU159
+Field	46	HWU062
+Field	45	HWU061
+Field	44	HWU060
+Field	43	HWU059
+Field	42	HPD1
+Field	41	HPD0
+Field	40	HD
+Field	39	HA
+Field	38	TBI1
+Field	37	TBI0
+Field	36	AS
+Res0	35:33
+Field	32	IPS
+Res0	31
+Field	30	TG1
+Res0	29
+Field	28	SH1
+Res0	27
+Field	26	ORGN1
+Res0	25
+Field	24	IRGN1
+Field	23	EPD1
+Field	22	A1
+Res0	21:17
+Field	16	T1SZ
+Res0	15
+Field	14	TG0
+Res0	13
+Field	12	SH0
+Res0	11
+Field	10	ORGN0
+Res0	9
+Field	8	IRGN0
+Field	7	EPD0
+Res0	6:1
+Field	0	T0SZ
+EndSysreg
+
+Sysreg	TCRMASK_EL12	3	5	2	7	2
+Mapping TCRMASK_EL1
+EndSysreg
+
+Sysreg	ERXGSR_EL1	3	0	5	3	2
+Field	63	S63
+Field	62	S62
+Field	61	S61
+Field	60	S60
+Field	59	S59
+Field	58	S58
+Field	57	S57
+Field	56	S56
+Field	55	S55
+Field	54	S54
+Field	53	S53
+Field	52	S52
+Field	51	S51
+Field	50	S50
+Field	49	S49
+Field	48	S48
+Field	47	S47
+Field	46	S46
+Field	45	S45
+Field	44	S44
+Field	43	S43
+Field	42	S42
+Field	41	S41
+Field	40	S40
+Field	39	S39
+Field	38	S38
+Field	37	S37
+Field	36	S36
+Field	35	S35
+Field	34	S34
+Field	33	S33
+Field	32	S32
+Field	31	S31
+Field	30	S30
+Field	29	S29
+Field	28	S28
+Field	27	S27
+Field	26	S26
+Field	25	S25
+Field	24	S24
+Field	23	S23
+Field	22	S22
+Field	21	S21
+Field	20	S20
+Field	19	S19
+Field	18	S18
+Field	17	S17
+Field	16	S16
+Field	15	S15
+Field	14	S14
+Field	13	S13
+Field	12	S12
+Field	11	S11
+Field	10	S10
+Field	9	S9
+Field	8	S8
+Field	7	S7
+Field	6	S6
+Field	5	S5
+Field	4	S4
+Field	3	S3
+Field	2	S2
+Field	1	S1
+Field	0	S0
+EndSysreg
+
+Sysreg	TRFCR_EL1	3	0	1	2	1
+Res0	63:7
+UnsignedEnum	6:5	TS
+	0b0001	VIRTUAL
+	0b0010	GUEST_PHYSICAL
+	0b0011	PHYSICAL
+EndEnum
+Res0	4:2
+Field	1	ExTRE
+Field	0	E0TRE
+EndSysreg
+
+Sysreg	TRCITECR_EL1	3	0	1	2	3
+Res0	63:2
+Field	1	E1E
+Field	0	E0E
+EndSysreg
+
+Sysreg	TRCITECR_EL12	3	5	1	2	3
+Mapping	TRCITECR_EL1
 EndSysreg
 
 Sysreg	SMPRI_EL1	3	0	1	2	4
@@ -2122,11 +2986,20 @@ Field	0	RND
 EndSysreg
 
 Sysreg	PMSFCR_EL1	3	0	9	9	4
-Res0	63:19
+Res0	63:53
+Field	52	SIMDm
+Field	51	FPm
+Field	50	STm
+Field	49	LDm
+Field	48	Bm
+Res0	47:21
+Field	20	SIMD
+Field	19	FP
 Field	18	ST
 Field	17	LD
 Field	16	B
-Res0	15:4
+Res0	15:5
+Field	4	FDS
 Field	3	FnE
 Field	2	FL
 Field	1	FT
@@ -2143,7 +3016,28 @@ Field	15:0	MINLAT
 EndSysreg
 
 Sysreg	PMSIDR_EL1	3	0	9	9	7
-Res0	63:25
+Res0	63:33
+UnsignedEnum	32	SME
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	31:28	ALTCLK
+	0b0000	NI
+	0b0001	IMP
+	0b1111	IMPDEF
+EndEnum
+UnsignedEnum	27	FPF
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	26	EFT
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	25	CRR
+	0b0	NI
+	0b1	IMP
+EndEnum
 Field	24	PBT
 Field	23:20	FORMAT
 Enum	19:16	COUNTSIZE
@@ -2161,7 +3055,10 @@ Enum	11:8	INTERVAL
 	0b0111	3072
 	0b1000	4096
 EndEnum
-Res0	7
+UnsignedEnum	7	FDS
+	0b0	NI
+	0b1	IMP
+EndEnum
 Field	6	FnE
 Field	5	ERND
 Field	4	LDS
@@ -2204,6 +3101,16 @@ Field	16	COLL
 Field	15:0	MSS
 EndSysreg
 
+Sysreg	PMSDSFR_EL1	3	0	9	10	4
+Field	63:0	S
+EndSysreg
+
+Sysreg	PMBMAR_EL1	3	0	9	10	5
+Res0	63:10
+Field	9:8	SH
+Field	7:0	Attr
+EndSysreg
+
 Sysreg	PMBIDR_EL1	3	0	9	10	7
 Res0	63:12
 Enum	11:8	EA
@@ -2217,6 +3124,21 @@ Field	4	P
 Field	3:0	ALIGN
 EndSysreg
 
+Sysreg	TRBMPAM_EL1	3	0	9	11	5
+Res0	63:27
+Field	26	EN
+Field	25:24	MPAM_SP
+Field	23:16	PMG
+Field	15:0	PARTID
+EndSysreg
+
+Sysreg	PMSSCR_EL1	3	0	9	13	3
+Res0	63:33
+Field	32	NC
+Res0	31:1
+Field	0	SS
+EndSysreg
+
 Sysreg	PMUACR_EL1	3	0	9	14	4
 Res0	63:33
 Field	32	F0
@@ -2224,11 +3146,458 @@ Field	31	C
 Field	30:0	P
 EndSysreg
 
+Sysreg	PMECR_EL1	3	0	9	14	5
+Res0	63:5
+Field	4:3	SSE
+Field	2	KPME
+Field	1:0	PMEE
+EndSysreg
+
+Sysreg	PMIAR_EL1	3	0	9	14	7
+Field	63:0	ADDRESS
+EndSysreg
+
+SysregFields	ICC_PPI_HMRx_EL1
+Field	63	HM63
+Field	62	HM62
+Field	61	HM61
+Field	60	HM60
+Field	59	HM59
+Field	58	HM58
+Field	57	HM57
+Field	56	HM56
+Field	55	HM55
+Field	54	HM54
+Field	53	HM53
+Field	52	HM52
+Field	51	HM51
+Field	50	HM50
+Field	49	HM49
+Field	48	HM48
+Field	47	HM47
+Field	46	HM46
+Field	45	HM45
+Field	44	HM44
+Field	43	HM43
+Field	42	HM42
+Field	41	HM41
+Field	40	HM40
+Field	39	HM39
+Field	38	HM38
+Field	37	HM37
+Field	36	HM36
+Field	35	HM35
+Field	34	HM34
+Field	33	HM33
+Field	32	HM32
+Field	31	HM31
+Field	30	HM30
+Field	29	HM29
+Field	28	HM28
+Field	27	HM27
+Field	26	HM26
+Field	25	HM25
+Field	24	HM24
+Field	23	HM23
+Field	22	HM22
+Field	21	HM21
+Field	20	HM20
+Field	19	HM19
+Field	18	HM18
+Field	17	HM17
+Field	16	HM16
+Field	15	HM15
+Field	14	HM14
+Field	13	HM13
+Field	12	HM12
+Field	11	HM11
+Field	10	HM10
+Field	9	HM9
+Field	8	HM8
+Field	7	HM7
+Field	6	HM6
+Field	5	HM5
+Field	4	HM4
+Field	3	HM3
+Field	2	HM2
+Field	1	HM1
+Field	0	HM0
+EndSysregFields
+
+Sysreg	ICC_PPI_HMR0_EL1	3	0	12	10	0
+Fields ICC_PPI_HMRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_HMR1_EL1	3	0	12	10	1
+Fields ICC_PPI_HMRx_EL1
+EndSysreg
+
+Sysreg	ICC_IDR0_EL1	3	0	12	10	2
+Res0	63:12
+UnsignedEnum	11:8	GCIE_LEGACY
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	PRI_BITS
+	0b0011	4BITS
+	0b0100	5BITS
+EndEnum
+UnsignedEnum	3:0	ID_BITS
+	0b0000	16BITS
+	0b0001	24BITS
+EndEnum
+EndSysreg
+
+Sysreg	ICC_ICSR_EL1	3	0	12	10	4
+Res0	63:48
+Field	47:32	IAFFID
+Res0	31:16
+Field	15:11	Priority
+Res0	10:6
+Field	5	HM
+Field	4	Active
+Field	3	IRM
+Field	2	Pending
+Field	1	Enabled
+Field	0	F
+EndSysreg
+
+SysregFields	ICC_PPI_ENABLERx_EL1
+Field	63	EN63
+Field	62	EN62
+Field	61	EN61
+Field	60	EN60
+Field	59	EN59
+Field	58	EN58
+Field	57	EN57
+Field	56	EN56
+Field	55	EN55
+Field	54	EN54
+Field	53	EN53
+Field	52	EN52
+Field	51	EN51
+Field	50	EN50
+Field	49	EN49
+Field	48	EN48
+Field	47	EN47
+Field	46	EN46
+Field	45	EN45
+Field	44	EN44
+Field	43	EN43
+Field	42	EN42
+Field	41	EN41
+Field	40	EN40
+Field	39	EN39
+Field	38	EN38
+Field	37	EN37
+Field	36	EN36
+Field	35	EN35
+Field	34	EN34
+Field	33	EN33
+Field	32	EN32
+Field	31	EN31
+Field	30	EN30
+Field	29	EN29
+Field	28	EN28
+Field	27	EN27
+Field	26	EN26
+Field	25	EN25
+Field	24	EN24
+Field	23	EN23
+Field	22	EN22
+Field	21	EN21
+Field	20	EN20
+Field	19	EN19
+Field	18	EN18
+Field	17	EN17
+Field	16	EN16
+Field	15	EN15
+Field	14	EN14
+Field	13	EN13
+Field	12	EN12
+Field	11	EN11
+Field	10	EN10
+Field	9	EN9
+Field	8	EN8
+Field	7	EN7
+Field	6	EN6
+Field	5	EN5
+Field	4	EN4
+Field	3	EN3
+Field	2	EN2
+Field	1	EN1
+Field	0	EN0
+EndSysregFields
+
+Sysreg	ICC_PPI_ENABLER0_EL1	3	0	12	10	6
+Fields ICC_PPI_ENABLERx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_ENABLER1_EL1	3	0	12	10	7
+Fields ICC_PPI_ENABLERx_EL1
+EndSysreg
+
+SysregFields	ICC_PPI_ACTIVERx_EL1
+Field	63	Active63
+Field	62	Active62
+Field	61	Active61
+Field	60	Active60
+Field	59	Active59
+Field	58	Active58
+Field	57	Active57
+Field	56	Active56
+Field	55	Active55
+Field	54	Active54
+Field	53	Active53
+Field	52	Active52
+Field	51	Active51
+Field	50	Active50
+Field	49	Active49
+Field	48	Active48
+Field	47	Active47
+Field	46	Active46
+Field	45	Active45
+Field	44	Active44
+Field	43	Active43
+Field	42	Active42
+Field	41	Active41
+Field	40	Active40
+Field	39	Active39
+Field	38	Active38
+Field	37	Active37
+Field	36	Active36
+Field	35	Active35
+Field	34	Active34
+Field	33	Active33
+Field	32	Active32
+Field	31	Active31
+Field	30	Active30
+Field	29	Active29
+Field	28	Active28
+Field	27	Active27
+Field	26	Active26
+Field	25	Active25
+Field	24	Active24
+Field	23	Active23
+Field	22	Active22
+Field	21	Active21
+Field	20	Active20
+Field	19	Active19
+Field	18	Active18
+Field	17	Active17
+Field	16	Active16
+Field	15	Active15
+Field	14	Active14
+Field	13	Active13
+Field	12	Active12
+Field	11	Active11
+Field	10	Active10
+Field	9	Active9
+Field	8	Active8
+Field	7	Active7
+Field	6	Active6
+Field	5	Active5
+Field	4	Active4
+Field	3	Active3
+Field	2	Active2
+Field	1	Active1
+Field	0	Active0
+EndSysregFields
+
+Sysreg	ICC_PPI_CACTIVER0_EL1	3	0	12	13	0
+Fields ICC_PPI_ACTIVERx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_CACTIVER1_EL1	3	0	12	13	1
+Fields ICC_PPI_ACTIVERx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_SACTIVER0_EL1	3	0	12	13	2
+Fields ICC_PPI_ACTIVERx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_SACTIVER1_EL1	3	0	12	13	3
+Fields ICC_PPI_ACTIVERx_EL1
+EndSysreg
+
+SysregFields	ICC_PPI_PENDRx_EL1
+Field	63	Pend63
+Field	62	Pend62
+Field	61	Pend61
+Field	60	Pend60
+Field	59	Pend59
+Field	58	Pend58
+Field	57	Pend57
+Field	56	Pend56
+Field	55	Pend55
+Field	54	Pend54
+Field	53	Pend53
+Field	52	Pend52
+Field	51	Pend51
+Field	50	Pend50
+Field	49	Pend49
+Field	48	Pend48
+Field	47	Pend47
+Field	46	Pend46
+Field	45	Pend45
+Field	44	Pend44
+Field	43	Pend43
+Field	42	Pend42
+Field	41	Pend41
+Field	40	Pend40
+Field	39	Pend39
+Field	38	Pend38
+Field	37	Pend37
+Field	36	Pend36
+Field	35	Pend35
+Field	34	Pend34
+Field	33	Pend33
+Field	32	Pend32
+Field	31	Pend31
+Field	30	Pend30
+Field	29	Pend29
+Field	28	Pend28
+Field	27	Pend27
+Field	26	Pend26
+Field	25	Pend25
+Field	24	Pend24
+Field	23	Pend23
+Field	22	Pend22
+Field	21	Pend21
+Field	20	Pend20
+Field	19	Pend19
+Field	18	Pend18
+Field	17	Pend17
+Field	16	Pend16
+Field	15	Pend15
+Field	14	Pend14
+Field	13	Pend13
+Field	12	Pend12
+Field	11	Pend11
+Field	10	Pend10
+Field	9	Pend9
+Field	8	Pend8
+Field	7	Pend7
+Field	6	Pend6
+Field	5	Pend5
+Field	4	Pend4
+Field	3	Pend3
+Field	2	Pend2
+Field	1	Pend1
+Field	0	Pend0
+EndSysregFields
+
+Sysreg	ICC_PPI_CPENDR0_EL1	3	0	12	13	4
+Fields ICC_PPI_PENDRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_CPENDR1_EL1	3	0	12	13	5
+Fields ICC_PPI_PENDRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_SPENDR0_EL1	3	0	12	13	6
+Fields ICC_PPI_PENDRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_SPENDR1_EL1	3	0	12	13	7
+Fields ICC_PPI_PENDRx_EL1
+EndSysreg
+
+SysregFields	ICC_PPI_PRIORITYRx_EL1
+Res0	63:61
+Field	60:56	Priority7
+Res0	55:53
+Field	52:48	Priority6
+Res0	47:45
+Field	44:40	Priority5
+Res0	39:37
+Field	36:32	Priority4
+Res0	31:29
+Field	28:24	Priority3
+Res0	23:21
+Field	20:16	Priority2
+Res0	15:13
+Field	12:8	Priority1
+Res0	7:5
+Field	4:0	Priority0
+EndSysregFields
+
+Sysreg	ICC_PPI_PRIORITYR0_EL1	3	0	12	14	0
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR1_EL1	3	0	12	14	1
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR2_EL1	3	0	12	14	2
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR3_EL1	3	0	12	14	3
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR4_EL1	3	0	12	14	4
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR5_EL1	3	0	12	14	5
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR6_EL1	3	0	12	14	6
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR7_EL1	3	0	12	14	7
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR8_EL1	3	0	12	15	0
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR9_EL1	3	0	12	15	1
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR10_EL1	3	0	12	15	2
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR11_EL1	3	0	12	15	3
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR12_EL1	3	0	12	15	4
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR13_EL1	3	0	12	15	5
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR14_EL1	3	0	12	15	6
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
+Sysreg	ICC_PPI_PRIORITYR15_EL1	3	0	12	15	7
+Fields	ICC_PPI_PRIORITYRx_EL1
+EndSysreg
+
 Sysreg	PMSELR_EL0	3	3	9	12	5
 Res0	63:5
 Field	4:0	SEL
 EndSysreg
 
+Sysreg	PMZR_EL0        3	3	9	13	4
+Res0	63:33
+Field	32	F0
+Field	31	C
+Field	30:0	P
+EndSysreg
+
 SysregFields	CONTEXTIDR_ELx
 Res0	63:32
 Field	31:0	PROCID
@@ -2299,6 +3668,19 @@ Res0	14:12
 Field	11:0	AFFINITY
 EndSysreg
 
+Sysreg	ICC_CR0_EL1	3	1	12	0	1
+Res0	63:39
+Field	38	PID
+Field	37:32	IPPT
+Res0	31:1
+Field	0	EN
+EndSysreg
+
+Sysreg	ICC_PCR_EL1	3	1	12	0	2
+Res0	63:5
+Field	4:0	PRIORITY
+EndSysreg
+
 Sysreg	CSSELR_EL1	3	2	0	0	0
 Res0	63:5
 Field	4	TnD
@@ -2367,7 +3749,110 @@ UnsignedEnum	2:0	F8S1
 EndEnum
 EndSysreg
 
-SysregFields	HFGxTR_EL2
+Sysreg	HCR_EL2		3	4	1	1	0
+Field	63:60	TWEDEL
+Field	59	TWEDEn
+Field	58	TID5
+Field	57	DCT
+Field	56	ATA
+Field	55	TTLBOS
+Field	54	TTLBIS
+Field	53	EnSCXT
+Field	52	TOCU
+Field	51	AMVOFFEN
+Field	50	TICAB
+Field	49	TID4
+Field	48	GPF
+Field	47	FIEN
+Field	46	FWB
+Field	45	NV2
+Field	44	AT
+Field	43	NV1
+Field	42	NV
+Field	41	API
+Field	40	APK
+Field	39	TME
+Field	38	MIOCNCE
+Field	37	TEA
+Field	36	TERR
+Field	35	TLOR
+Field	34	E2H
+Field	33	ID
+Field	32	CD
+Field	31	RW
+Field	30	TRVM
+Field	29	HCD
+Field	28	TDZ
+Field	27	TGE
+Field	26	TVM
+Field	25	TTLB
+Field	24	TPU
+Field	23	TPCP
+Field	22	TSW
+Field	21	TACR
+Field	20	TIDCP
+Field	19	TSC
+Field	18	TID3
+Field	17	TID2
+Field	16	TID1
+Field	15	TID0
+Field	14	TWE
+Field	13	TWI
+Field	12	DC
+UnsignedEnum	11:10	BSU
+	0b00	NONE
+	0b01	IS
+	0b10	OS
+	0b11	FS
+EndEnum
+Field	9	FB
+Field	8	VSE
+Field	7	VI
+Field	6	VF
+Field	5	AMO
+Field	4	IMO
+Field	3	FMO
+Field	2	PTW
+Field	1	SWIO
+Field	0	VM
+EndSysreg
+
+Sysreg MDCR_EL2		3	4	1	1	1
+Res0	63:51
+Field	50	EnSTEPOP
+Res0	49:44
+Field	43	EBWE
+Res0	42
+Field	41:40	PMEE
+Res0	39:37
+Field	36	HPMFZS
+Res0	35:32
+Field	31:30	PMSSE
+Field	29	HPMFZO
+Field	28	MTPME
+Field	27	TDCC
+Field	26	HLP
+Field	25:24	E2TB
+Field	23	HCCD
+Res0	22:20
+Field	19	TTRF
+Res0	18
+Field	17	HPMD
+Res0	16
+Field	15	EnSPM
+Field	14	TPMS
+Field	13:12	E2PB
+Field	11	TDRA
+Field	10	TDOSA
+Field	9	TDA
+Field	8	TDE
+Field	7	HPME
+Field	6	TPM
+Field	5	TPMCR
+Field	4:0	HPMN
+EndSysreg
+
+Sysreg HFGRTR_EL2	3	4	1	1	4
 Field	63	nAMAIR2_EL1
 Field	62	nMAIR2_EL1
 Field	61	nS2POR_EL1
@@ -2432,53 +3917,74 @@ Field	3	AMAIR_EL1
 Field	2	AIDR_EL1
 Field	1	AFSR1_EL1
 Field	0	AFSR0_EL1
-EndSysregFields
-
-Sysreg MDCR_EL2		3	4	1	1	1
-Res0	63:51
-Field	50	EnSTEPOP
-Res0	49:44
-Field	43	EBWE
-Res0	42
-Field	41:40	PMEE
-Res0	39:37
-Field	36	HPMFZS
-Res0	35:32
-Field	31:30	PMSSE
-Field	29	HPMFZO
-Field	28	MTPME
-Field	27	TDCC
-Field	26	HLP
-Field	25:24	E2TB
-Field	23	HCCD
-Res0	22:20
-Field	19	TTRF
-Res0	18
-Field	17	HPMD
-Res0	16
-Field	15	EnSPM
-Field	14	TPMS
-Field	13:12	E2PB
-Field	11	TDRA
-Field	10	TDOSA
-Field	9	TDA
-Field	8	TDE
-Field	7	HPME
-Field	6	TPM
-Field	5	TPMCR
-Field	4:0	HPMN
-EndSysreg
-
-Sysreg HFGRTR_EL2	3	4	1	1	4
-Fields	HFGxTR_EL2
 EndSysreg
 
 Sysreg HFGWTR_EL2	3	4	1	1	5
-Fields	HFGxTR_EL2
+Field	63	nAMAIR2_EL1
+Field	62	nMAIR2_EL1
+Field	61	nS2POR_EL1
+Field	60	nPOR_EL1
+Field	59	nPOR_EL0
+Field	58	nPIR_EL1
+Field	57	nPIRE0_EL1
+Field	56	nRCWMASK_EL1
+Field	55	nTPIDR2_EL0
+Field	54	nSMPRI_EL1
+Field	53	nGCS_EL1
+Field	52	nGCS_EL0
+Res0	51
+Field	50	nACCDATA_EL1
+Field	49	ERXADDR_EL1
+Field	48	ERXPFGCDN_EL1
+Field	47	ERXPFGCTL_EL1
+Res0	46
+Field	45	ERXMISCn_EL1
+Field	44	ERXSTATUS_EL1
+Field	43	ERXCTLR_EL1
+Res0	42
+Field	41	ERRSELR_EL1
+Res0	40
+Field	39	ICC_IGRPENn_EL1
+Field	38	VBAR_EL1
+Field	37	TTBR1_EL1
+Field	36	TTBR0_EL1
+Field	35	TPIDR_EL0
+Field	34	TPIDRRO_EL0
+Field	33	TPIDR_EL1
+Field	32	TCR_EL1
+Field	31	SCXTNUM_EL0
+Field	30	SCXTNUM_EL1
+Field	29	SCTLR_EL1
+Res0	28
+Field	27	PAR_EL1
+Res0	26:25
+Field	24	MAIR_EL1
+Field	23	LORSA_EL1
+Field	22	LORN_EL1
+Res0	21
+Field	20	LOREA_EL1
+Field	19	LORC_EL1
+Res0	18
+Field	17	FAR_EL1
+Field	16	ESR_EL1
+Res0	15:14
+Field	13	CSSELR_EL1
+Field	12	CPACR_EL1
+Field	11	CONTEXTIDR_EL1
+Res0	10:9
+Field	8	APIBKey
+Field	7	APIAKey
+Field	6	APGAKey
+Field	5	APDBKey
+Field	4	APDAKey
+Field	3	AMAIR_EL1
+Res0	2
+Field	1	AFSR1_EL1
+Field	0	AFSR0_EL1
 EndSysreg
 
 Sysreg HFGITR_EL2	3	4	1	1	6
-Res0	63
+Field   63	PSBCSYNC
 Field	62	ATS1E1A
 Res0	61
 Field	60	COSPRCTX
@@ -2544,6 +4050,117 @@ Field	1	ICIALLU
 Field	0	ICIALLUIS
 EndSysreg
 
+Sysreg TRFCR_EL2	3	4	1	2	1
+Res0	63:7
+UnsignedEnum	6:5	TS
+	0b0000	USE_TRFCR_EL1_TS
+	0b0001	VIRTUAL
+	0b0010	GUEST_PHYSICAL
+	0b0011	PHYSICAL
+EndEnum
+Res0	4
+Field	3	CX
+Res0	2
+Field	1	E2TRE
+Field	0	E0HTRE
+EndSysreg
+
+
+Sysreg HDFGRTR2_EL2	3	4	3	1	0
+Res0	63:25
+Field	24	nPMBMAR_EL1
+Field	23	nMDSTEPOP_EL1
+Field	22	nTRBMPAM_EL1
+Res0	21
+Field	20	nTRCITECR_EL1
+Field	19	nPMSDSFR_EL1
+Field	18	nSPMDEVAFF_EL1
+Field	17	nSPMID
+Field	16	nSPMSCR_EL1
+Field	15	nSPMACCESSR_EL1
+Field	14	nSPMCR_EL0
+Field	13	nSPMOVS
+Field	12	nSPMINTEN
+Field	11	nSPMCNTEN
+Field	10	nSPMSELR_EL0
+Field	9	nSPMEVTYPERn_EL0
+Field	8	nSPMEVCNTRn_EL0
+Field	7	nPMSSCR_EL1
+Field	6	nPMSSDATA
+Field	5	nMDSELR_EL1
+Field	4	nPMUACR_EL1
+Field	3	nPMICFILTR_EL0
+Field	2	nPMICNTR_EL0
+Field	1	nPMIAR_EL1
+Field	0	nPMECR_EL1
+EndSysreg
+
+Sysreg HDFGWTR2_EL2	3	4	3	1	1
+Res0	63:25
+Field	24	nPMBMAR_EL1
+Field	23	nMDSTEPOP_EL1
+Field	22	nTRBMPAM_EL1
+Field	21	nPMZR_EL0
+Field	20	nTRCITECR_EL1
+Field	19	nPMSDSFR_EL1
+Res0	18:17
+Field	16	nSPMSCR_EL1
+Field	15	nSPMACCESSR_EL1
+Field	14	nSPMCR_EL0
+Field	13	nSPMOVS
+Field	12	nSPMINTEN
+Field	11	nSPMCNTEN
+Field	10	nSPMSELR_EL0
+Field	9	nSPMEVTYPERn_EL0
+Field	8	nSPMEVCNTRn_EL0
+Field	7	nPMSSCR_EL1
+Res0	6
+Field	5	nMDSELR_EL1
+Field	4	nPMUACR_EL1
+Field	3	nPMICFILTR_EL0
+Field	2	nPMICNTR_EL0
+Field	1	nPMIAR_EL1
+Field	0	nPMECR_EL1
+EndSysreg
+
+Sysreg	HFGRTR2_EL2	3	4	3	1	2
+Res0	63:15
+Field	14	nACTLRALIAS_EL1
+Field	13	nACTLRMASK_EL1
+Field	12	nTCR2ALIAS_EL1
+Field	11	nTCRALIAS_EL1
+Field	10	nSCTLRALIAS2_EL1
+Field	9	nSCTLRALIAS_EL1
+Field	8	nCPACRALIAS_EL1
+Field	7	nTCR2MASK_EL1
+Field	6	nTCRMASK_EL1
+Field	5	nSCTLR2MASK_EL1
+Field	4	nSCTLRMASK_EL1
+Field	3	nCPACRMASK_EL1
+Field	2	nRCWSMASK_EL1
+Field	1	nERXGSR_EL1
+Field	0	nPFAR_EL1
+EndSysreg
+
+Sysreg	HFGWTR2_EL2	3	4	3	1	3
+Res0	63:15
+Field	14	nACTLRALIAS_EL1
+Field	13	nACTLRMASK_EL1
+Field	12	nTCR2ALIAS_EL1
+Field	11	nTCRALIAS_EL1
+Field	10	nSCTLRALIAS2_EL1
+Field	9	nSCTLRALIAS_EL1
+Field	8	nCPACRALIAS_EL1
+Field	7	nTCR2MASK_EL1
+Field	6	nTCRMASK_EL1
+Field	5	nSCTLR2MASK_EL1
+Field	4	nSCTLRMASK_EL1
+Field	3	nCPACRMASK_EL1
+Field	2	nRCWSMASK_EL1
+Res0	1
+Field	0	nPFAR_EL1
+EndSysreg
+
 Sysreg HDFGRTR_EL2	3	4	3	1	4
 Field	63	PMBIDR_EL1
 Field	62	nPMSNEVFR_EL1
@@ -2716,6 +4333,12 @@ Field	1	AMEVCNTR00_EL0
 Field	0	AMCNTEN0
 EndSysreg
 
+Sysreg	HFGITR2_EL2	3	4	3	1	7
+Res0	63:2
+Field	1	nDCCIVAPS
+Field	0	TSBCSYNC
+EndSysreg
+
 Sysreg	ZCR_EL2	3	4	1	2	0
 Fields	ZCR_ELx
 EndSysreg
@@ -2771,6 +4394,12 @@ Sysreg	SMCR_EL2	3	4	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+Sysreg	VNCR_EL2	3	4	2	2	0
+Field	63:57	RESS
+Field	56:12	BADDR
+Res0	11:0
+EndSysreg
+
 Sysreg	GCSCR_EL2	3	4	2	5	0
 Fields	GCSCR_ELx
 EndSysreg
@@ -2938,6 +4567,129 @@ Field	31:16	PhyPARTID29
 Field	15:0	PhyPARTID28
 EndSysreg
 
+Sysreg	ICH_HFGRTR_EL2	3	4	12	9	4
+Res0	63:21
+Field	20	ICC_PPI_ACTIVERn_EL1
+Field	19	ICC_PPI_PRIORITYRn_EL1
+Field	18	ICC_PPI_PENDRn_EL1
+Field	17	ICC_PPI_ENABLERn_EL1
+Field	16	ICC_PPI_HMRn_EL1
+Res0	15:8
+Field	7	ICC_IAFFIDR_EL1
+Field	6	ICC_ICSR_EL1
+Field	5	ICC_PCR_EL1
+Field	4	ICC_HPPIR_EL1
+Field	3	ICC_HAPR_EL1
+Field	2	ICC_CR0_EL1
+Field	1	ICC_IDRn_EL1
+Field	0	ICC_APR_EL1
+EndSysreg
+
+Sysreg	ICH_HFGWTR_EL2	3	4	12	9	6
+Res0	63:21
+Field	20	ICC_PPI_ACTIVERn_EL1
+Field	19	ICC_PPI_PRIORITYRn_EL1
+Field	18	ICC_PPI_PENDRn_EL1
+Field	17	ICC_PPI_ENABLERn_EL1
+Res0	16:7
+Field	6	ICC_ICSR_EL1
+Field	5	ICC_PCR_EL1
+Res0    4:3
+Field	2	ICC_CR0_EL1
+Res0	1
+Field	0	ICC_APR_EL1
+EndSysreg
+
+Sysreg	ICH_HFGITR_EL2	3	4	12	9	7
+Res0	63:11
+Field	10	GICRCDNMIA
+Field	9	GICRCDIA
+Field	8	GICCDDI
+Field	7	GICCDEOI
+Field	6	GICCDHM
+Field	5	GICCDRCFG
+Field	4	GICCDPEND
+Field	3	GICCDAFF
+Field	2	GICCDPRI
+Field	1	GICCDDIS
+Field	0	GICCDEN
+EndSysreg
+
+Sysreg	ICH_HCR_EL2	3	4	12	11	0
+Res0	63:32
+Field	31:27	EOIcount
+Res0	26:16
+Field	15	DVIM
+Field	14	TDIR
+Field	13	TSEI
+Field	12	TALL1
+Field	11	TALL0
+Field	10	TC
+Res0	9
+Field	8	vSGIEOICount
+Field	7	VGrp1DIE
+Field	6	VGrp1EIE
+Field	5	VGrp0DIE
+Field	4	VGrp0EIE
+Field	3	NPIE
+Field	2	LRENPIE
+Field	1	UIE
+Field	0	En
+EndSysreg
+
+Sysreg	ICH_VTR_EL2	3	4	12	11	1
+Res0	63:32
+Field	31:29	PRIbits
+Field	28:26	PREbits
+Field	25:23	IDbits
+Field	22	SEIS
+Field	21	A3V
+Field	20	nV4
+Field	19	TDS
+Field	18	DVIM
+Res0	17:5
+Field	4:0	ListRegs
+EndSysreg
+
+Sysreg	ICH_MISR_EL2	3	4	12	11	2
+Res0	63:8
+Field	7	VGrp1D
+Field	6	VGrp1E
+Field	5	VGrp0D
+Field	4	VGrp0E
+Field	3	NP
+Field	2	LRENP
+Field	1	U
+Field	0	EOI
+EndSysreg
+
+Sysreg	ICH_VCTLR_EL2	3	4	12	11	4
+Res0	63:2
+Field	1	V3
+Field	0	En
+EndSysreg
+
+Sysreg	ICH_VMCR_EL2	3	4	12	11	7
+Prefix	FEAT_GCIE
+Res0	63:32
+Field	31:27	VPMR
+Res0	26:1
+Field	0	EN
+EndPrefix
+Res0	63:32
+Field	31:24	VPMR
+Field	23:21	VBPR0
+Field	20:18	VBPR1
+Res0	17:10
+Field	9	VEOIM
+Res0	8:5
+Field	4	VCBPR
+Field	3	VFIQEn
+Field	2	VAckCtl
+Field	1	VENG1
+Field	0	VENG0
+EndSysreg
+
 Sysreg	CONTEXTIDR_EL2	3	4	13	0	1
 Fields	CONTEXTIDR_ELx
 EndSysreg
@@ -2947,23 +4699,27 @@ Field	63:0	PhysicalOffset
 EndSysreg
 
 Sysreg	CPACR_EL12	3	5	1	0	2
-Fields	CPACR_ELx
+Mapping	CPACR_EL1
 EndSysreg
 
 Sysreg	ZCR_EL12	3	5	1	2	0
-Fields	ZCR_ELx
+Mapping	ZCR_EL1
+EndSysreg
+
+Sysreg	TRFCR_EL12	3	5	1	2	1
+Mapping	TRFCR_EL1
 EndSysreg
 
 Sysreg	SMCR_EL12	3	5	1	2	6
-Fields	SMCR_ELx
+Mapping	SMCR_EL1
 EndSysreg
 
 Sysreg	GCSCR_EL12	3	5	2	5	0
-Fields	GCSCR_ELx
+Mapping	GCSCR_EL1
 EndSysreg
 
 Sysreg	GCSPR_EL12	3	5	2	5	1
-Fields	GCSPR_ELx
+Mapping	GCSPR_EL1
 EndSysreg
 
 Sysreg	FAR_EL12	3	5	6	0	0
@@ -2975,7 +4731,7 @@ Fields	MPAM1_ELx
 EndSysreg
 
 Sysreg	CONTEXTIDR_EL12	3	5	13	0	1
-Fields	CONTEXTIDR_ELx
+Mapping	CONTEXTIDR_EL1
 EndSysreg
 
 SysregFields TTBRx_EL1
@@ -2992,8 +4748,104 @@ Sysreg	TTBR1_EL1	3	0	2	0	1
 Fields	TTBRx_EL1
 EndSysreg
 
-SysregFields	TCR2_EL1x
-Res0	63:16
+Sysreg	TCR_EL1		3	0	2	0	2
+Res0    63:62
+Field   61      MTX1
+Field   60      MTX0
+Field   59      DS
+Field   58      TCMA1
+Field   57      TCMA0
+Field   56      E0PD1
+Field   55      E0PD0
+Field   54      NFD1
+Field   53      NFD0
+Field   52      TBID1
+Field   51      TBID0
+Field   50      HWU162
+Field   49      HWU161
+Field   48      HWU160
+Field   47      HWU159
+Field   46      HWU062
+Field   45      HWU061
+Field   44      HWU060
+Field   43      HWU059
+Field   42      HPD1
+Field   41      HPD0
+Field   40      HD
+Field   39      HA
+Field   38      TBI1
+Field   37      TBI0
+Field   36      AS
+Res0    35
+Field   34:32   IPS
+Enum	31:30   TG1
+	0b01	16K
+	0b10	4K
+	0b11	64K
+EndEnum
+Enum	29:28   SH1
+	0b00	NONE
+	0b10	OUTER
+	0b11	INNER
+EndEnum
+Enum	27:26  ORGN1
+	0b00	NC
+	0b01	WBWA
+	0b10	WT
+	0b11	WBnWA
+EndEnum
+Enum	25:24   IRGN1
+	0b00	NC
+	0b01	WBWA
+	0b10	WT
+	0b11	WBnWA
+EndEnum
+Field   23      EPD1
+Field   22      A1
+Field   21:16   T1SZ
+Enum	15:14   TG0
+	0b00	4K
+	0b01	64K
+	0b10	16K
+EndEnum
+Enum	13:12   SH0
+	0b00	NONE
+	0b10	OUTER
+	0b11	INNER
+EndEnum
+Enum	11:10  ORGN0
+	0b00	NC
+	0b01	WBWA
+	0b10	WT
+	0b11	WBnWA
+EndEnum
+Enum	9:8   IRGN0
+	0b00	NC
+	0b01	WBWA
+	0b10	WT
+	0b11	WBnWA
+EndEnum
+Field   7       EPD0
+Res0    6
+Field   5:0     T0SZ
+EndSysreg
+
+Sysreg	TCR_EL12        3	5	2	0	2
+Mapping	TCR_EL1
+EndSysreg
+
+Sysreg	TCRALIAS_EL1    3	0	2	7	6
+Mapping	TCR_EL1
+EndSysreg
+
+Sysreg	TCR2_EL1	3	0	2	0	3
+Res0	63:22
+Field	21	FNGNA1
+Field	20	FNGNA0
+Res0	19
+Field	18	FNG1
+Field	17	FNG0
+Field	16	A2
 Field	15	DisCH1
 Field	14	DisCH0
 Res0	13:12
@@ -3006,18 +4858,21 @@ Field	3	POE
 Field	2	E0POE
 Field	1	PIE
 Field	0	PnCH
-EndSysregFields
-
-Sysreg	TCR2_EL1	3	0	2	0	3
-Fields	TCR2_EL1x
 EndSysreg
 
 Sysreg	TCR2_EL12	3	5	2	0	3
-Fields	TCR2_EL1x
+Mapping	TCR2_EL1
+EndSysreg
+
+Sysreg	TCR2ALIAS_EL1   3	0	2	7	7
+Mapping	TCR2_EL1
 EndSysreg
 
 Sysreg	TCR2_EL2	3	4	2	0	3
-Res0	63:16
+Res0	63:19
+Field	18	FNG1
+Field	17	FNG0
+Field	16	A2
 Field	15	DisCH1
 Field	14	DisCH0
 Field	13	AMEC1
@@ -3084,7 +4939,7 @@ Fields	PIRx_ELx
 EndSysreg
 
 Sysreg	PIRE0_EL12	3	5	10	2	2
-Fields	PIRx_ELx
+Mapping	PIRE0_EL1
 EndSysreg
 
 Sysreg	PIRE0_EL2	3	4	10	2	2
@@ -3096,7 +4951,7 @@ Fields	PIRx_ELx
 EndSysreg
 
 Sysreg	PIR_EL12	3	5	10	2	3
-Fields	PIRx_ELx
+Mapping	PIR_EL1
 EndSysreg
 
 Sysreg	PIR_EL2		3	4	10	2	3
@@ -3116,7 +4971,7 @@ Fields	PIRx_ELx
 EndSysreg
 
 Sysreg	POR_EL12	3	5	10	2	4
-Fields	PIRx_ELx
+Mapping	POR_EL1
 EndSysreg
 
 Sysreg	S2POR_EL1	3	0	10	2	5
@@ -3277,7 +5132,12 @@ Field	31:0	TRG
 EndSysreg
 
 Sysreg	TRBIDR_EL1	3	0	9	11	7
-Res0	63:12
+Res0	63:16
+UnsignedEnum	15:12	MPAM
+	0b0000	NI
+	0b0001	DEFAULT
+	0b0010	IMP
+EndEnum
 Enum	11:8	EA
 	0b0000	NON_DESC
 	0b0001	IGNORE
@@ -3288,3 +5148,10 @@ Field	5	F
 Field	4	P
 Field	3:0	Align
 EndSysreg
+
+Sysreg	HPFAR_EL2	3	4	6	0	4
+Field	63	NS
+Res0	62:48
+Field	47:4	FIPA
+Res0	3:0
+EndSysreg
diff --git a/arch/arm64/xen/hypercall.S b/arch/arm64/xen/hypercall.S
index 9d01361696a1..ae551b857137 100644
--- a/arch/arm64/xen/hypercall.S
+++ b/arch/arm64/xen/hypercall.S
@@ -83,7 +83,26 @@ HYPERCALL3(vcpu_op);
 HYPERCALL1(platform_op_raw);
 HYPERCALL2(multicall);
 HYPERCALL2(vm_assist);
-HYPERCALL3(dm_op);
+
+SYM_FUNC_START(HYPERVISOR_dm_op)
+	mov x16, #__HYPERVISOR_dm_op;	\
+	/*
+	 * dm_op hypercalls are issued by the userspace. The kernel needs to
+	 * enable access to TTBR0_EL1 as the hypervisor would issue stage 1
+	 * translations to user memory via AT instructions. Since AT
+	 * instructions are not affected by the PAN bit (ARMv8.1), we only
+	 * need the explicit uaccess_enable/disable if the TTBR0 PAN emulation
+	 * is enabled (it implies that hardware UAO and PAN disabled).
+	 */
+	uaccess_ttbr0_enable x6, x7, x8
+	hvc XEN_IMM
+
+	/*
+	 * Disable userspace access from kernel once the hyp call completed.
+	 */
+	uaccess_ttbr0_disable x6, x7
+	ret
+SYM_FUNC_END(HYPERVISOR_dm_op);
 
 SYM_FUNC_START(privcmd_call)
 	mov x16, x0
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index acc431c331b0..4331313a42ff 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -80,7 +80,6 @@ config CSKY
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_ERROR_INJECTION
-	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA
diff --git a/arch/csky/abiv1/alignment.c b/arch/csky/abiv1/alignment.c
index e5b8b4b2109a..aee904833dec 100644
--- a/arch/csky/abiv1/alignment.c
+++ b/arch/csky/abiv1/alignment.c
@@ -300,7 +300,7 @@ bad_area:
 	force_sig_fault(SIGBUS, BUS_ADRALN, (void __user *)addr);
 }
 
-static struct ctl_table alignment_tbl[5] = {
+static const struct ctl_table alignment_tbl[] = {
 	{
 		.procname = "kernel_enable",
 		.data = &align_kern_enable,
diff --git a/arch/csky/abiv1/cacheflush.c b/arch/csky/abiv1/cacheflush.c
index 171e8fb32285..4bc0aad3cf8a 100644
--- a/arch/csky/abiv1/cacheflush.c
+++ b/arch/csky/abiv1/cacheflush.c
@@ -25,12 +25,12 @@ void flush_dcache_folio(struct folio *folio)
 	mapping = folio_flush_mapping(folio);
 
 	if (mapping && !folio_mapped(folio))
-		clear_bit(PG_dcache_clean, &folio->flags);
+		clear_bit(PG_dcache_clean, &folio->flags.f);
 	else {
 		dcache_wbinv_all();
 		if (mapping)
 			icache_inv_all();
-		set_bit(PG_dcache_clean, &folio->flags);
+		set_bit(PG_dcache_clean, &folio->flags.f);
 	}
 }
 EXPORT_SYMBOL(flush_dcache_folio);
@@ -56,7 +56,7 @@ void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
 		return;
 
 	folio = page_folio(pfn_to_page(pfn));
-	if (!test_and_set_bit(PG_dcache_clean, &folio->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &folio->flags.f))
 		dcache_wbinv_all();
 
 	if (folio_flush_mapping(folio)) {
diff --git a/arch/csky/abiv2/cacheflush.c b/arch/csky/abiv2/cacheflush.c
index 876028b1083f..064b0f0f95ca 100644
--- a/arch/csky/abiv2/cacheflush.c
+++ b/arch/csky/abiv2/cacheflush.c
@@ -21,7 +21,7 @@ void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
 
 	folio = page_folio(pfn_to_page(pfn));
 
-	if (test_and_set_bit(PG_dcache_clean, &folio->flags))
+	if (test_and_set_bit(PG_dcache_clean, &folio->flags.f))
 		return;
 
 	icache_inv_range(address, address + nr*PAGE_SIZE);
diff --git a/arch/csky/abiv2/inc/abi/cacheflush.h b/arch/csky/abiv2/inc/abi/cacheflush.h
index 6513ac5d2578..da51a0f02391 100644
--- a/arch/csky/abiv2/inc/abi/cacheflush.h
+++ b/arch/csky/abiv2/inc/abi/cacheflush.h
@@ -20,8 +20,8 @@
 
 static inline void flush_dcache_folio(struct folio *folio)
 {
-	if (test_bit(PG_dcache_clean, &folio->flags))
-		clear_bit(PG_dcache_clean, &folio->flags);
+	if (test_bit(PG_dcache_clean, &folio->flags.f))
+		clear_bit(PG_dcache_clean, &folio->flags.f);
 }
 #define flush_dcache_folio flush_dcache_folio
 
diff --git a/arch/csky/include/asm/bitops.h b/arch/csky/include/asm/bitops.h
index 72e1b2aa29a0..80d67eee6e86 100644
--- a/arch/csky/include/asm/bitops.h
+++ b/arch/csky/include/asm/bitops.h
@@ -9,7 +9,7 @@
 /*
  * asm-generic/bitops/ffs.h
  */
-static inline int ffs(int x)
+static inline __attribute_const__ int ffs(int x)
 {
 	if (!x)
 		return 0;
@@ -26,7 +26,7 @@ static inline int ffs(int x)
 /*
  * asm-generic/bitops/__ffs.h
  */
-static __always_inline unsigned long __ffs(unsigned long x)
+static __always_inline __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	asm volatile (
 		"brev %0\n"
@@ -39,7 +39,7 @@ static __always_inline unsigned long __ffs(unsigned long x)
 /*
  * asm-generic/bitops/fls.h
  */
-static __always_inline int fls(unsigned int x)
+static __always_inline __attribute_const__ int fls(unsigned int x)
 {
 	asm volatile(
 		"ff1 %0\n"
@@ -52,7 +52,7 @@ static __always_inline int fls(unsigned int x)
 /*
  * asm-generic/bitops/__fls.h
  */
-static __always_inline unsigned long __fls(unsigned long x)
+static __always_inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	return fls(x) - 1;
 }
diff --git a/arch/csky/include/asm/io.h b/arch/csky/include/asm/io.h
index ed53f0b47388..536d3bf32ff1 100644
--- a/arch/csky/include/asm/io.h
+++ b/arch/csky/include/asm/io.h
@@ -36,7 +36,7 @@
  */
 #define ioremap_wc(addr, size) \
 	ioremap_prot((addr), (size), \
-		(_PAGE_IOREMAP & ~_CACHE_MASK) | _CACHE_UNCACHED)
+		__pgprot((_PAGE_IOREMAP & ~_CACHE_MASK) | _CACHE_UNCACHED))
 
 #include <asm-generic/io.h>
 
diff --git a/arch/csky/include/asm/pgalloc.h b/arch/csky/include/asm/pgalloc.h
index 9c84c9012e53..9ed2b15ffd94 100644
--- a/arch/csky/include/asm/pgalloc.h
+++ b/arch/csky/include/asm/pgalloc.h
@@ -29,7 +29,7 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
 	pte_t *pte;
 	unsigned long i;
 
-	pte = (pte_t *) __get_free_page(GFP_KERNEL);
+	pte = __pte_alloc_one_kernel(mm);
 	if (!pte)
 		return NULL;
 
@@ -44,7 +44,7 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 	pgd_t *ret;
 	pgd_t *init;
 
-	ret = (pgd_t *) __get_free_page(GFP_KERNEL);
+	ret = __pgd_alloc(mm, 0);
 	if (ret) {
 		init = pgd_offset(&init_mm, 0UL);
 		pgd_init((unsigned long *)ret);
@@ -61,11 +61,8 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 	return ret;
 }
 
-#define __pte_free_tlb(tlb, pte, address)		\
-do {							\
-	pagetable_pte_dtor(page_ptdesc(pte));		\
-	tlb_remove_page_ptdesc(tlb, page_ptdesc(pte));	\
-} while (0)
+#define __pte_free_tlb(tlb, pte, address)	\
+	tlb_remove_ptdesc((tlb), page_ptdesc(pte))
 
 extern void pagetable_init(void);
 extern void mmu_init(unsigned long min_pfn, unsigned long max_pfn);
diff --git a/arch/csky/include/asm/pgtable.h b/arch/csky/include/asm/pgtable.h
index a397e1718ab6..d606afbabce1 100644
--- a/arch/csky/include/asm/pgtable.h
+++ b/arch/csky/include/asm/pgtable.h
@@ -200,7 +200,7 @@ static inline pte_t pte_mkyoung(pte_t pte)
 	return pte;
 }
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -249,11 +249,6 @@ static inline pgprot_t pgprot_writecombine(pgprot_t _prot)
 	return __pgprot(prot);
 }
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot)    pfn_pte(page_to_pfn(page), (pgprot))
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	return __pte((pte_val(pte) & _PAGE_CHG_MASK) |
@@ -268,7 +263,4 @@ void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
 #define update_mmu_cache(vma, addr, ptep) \
 	update_mmu_cache_range(NULL, vma, addr, ptep, 1)
 
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
-	remap_pfn_range(vma, vaddr, pfn, size, prot)
-
 #endif /* __ASM_CSKY_PGTABLE_H */
diff --git a/arch/csky/include/asm/syscall.h b/arch/csky/include/asm/syscall.h
index 0de5734950bf..717f44b4d26f 100644
--- a/arch/csky/include/asm/syscall.h
+++ b/arch/csky/include/asm/syscall.h
@@ -59,6 +59,19 @@ syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
 	memcpy(args, &regs->a1, 5 * sizeof(args[0]));
 }
 
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+		      const unsigned long *args)
+{
+	memcpy(&regs->a0, args, 6 * sizeof(regs->a0));
+	/*
+	 * Also copy the first argument into orig_a0
+	 * so that syscall_get_arguments() would return it
+	 * instead of the previous value.
+	 */
+	regs->orig_a0 = regs->a0;
+}
+
 static inline int
 syscall_get_arch(struct task_struct *task)
 {
diff --git a/arch/csky/kernel/Makefile b/arch/csky/kernel/Makefile
index de1c3472e8f0..a406a4ac2378 100644
--- a/arch/csky/kernel/Makefile
+++ b/arch/csky/kernel/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
-extra-y := vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
 
 obj-y += head.o entry.o atomic.o signal.o traps.o irq.o time.o vdso.o vdso/
 obj-y += power.o syscall.o syscall_table.o setup.o
diff --git a/arch/csky/kernel/asm-offsets.c b/arch/csky/kernel/asm-offsets.c
index d1e903579473..5525c8e7e1d9 100644
--- a/arch/csky/kernel/asm-offsets.c
+++ b/arch/csky/kernel/asm-offsets.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+#define COMPILE_OFFSETS
 
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
diff --git a/arch/csky/kernel/perf_event.c b/arch/csky/kernel/perf_event.c
index e5f18420ce64..e0a36acd265b 100644
--- a/arch/csky/kernel/perf_event.c
+++ b/arch/csky/kernel/perf_event.c
@@ -1139,8 +1139,7 @@ static irqreturn_t csky_pmu_handle_irq(int irq_num, void *dev)
 		perf_sample_data_init(&data, 0, hwc->last_period);
 		csky_pmu_event_set_period(event);
 
-		if (perf_event_overflow(event, &data, regs))
-			csky_pmu_stop_event(event);
+		perf_event_overflow(event, &data, regs);
 	}
 
 	csky_pmu_enable(&csky_pmu.pmu);
diff --git a/arch/csky/kernel/process.c b/arch/csky/kernel/process.c
index 0c6e4b17fe00..a7a90340042a 100644
--- a/arch/csky/kernel/process.c
+++ b/arch/csky/kernel/process.c
@@ -32,7 +32,7 @@ void flush_thread(void){}
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct switch_stack *childstack;
diff --git a/arch/csky/kernel/ptrace.c b/arch/csky/kernel/ptrace.c
index 0f7e7b653c72..6bb685a2646b 100644
--- a/arch/csky/kernel/ptrace.c
+++ b/arch/csky/kernel/ptrace.c
@@ -166,7 +166,7 @@ static int fpr_set(struct task_struct *target,
 
 static const struct user_regset csky_regsets[] = {
 	[REGSET_GPR] = {
-		.core_note_type = NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n = sizeof(struct pt_regs) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
@@ -174,7 +174,7 @@ static const struct user_regset csky_regsets[] = {
 		.set = gpr_set,
 	},
 	[REGSET_FPR] = {
-		.core_note_type = NT_PRFPREG,
+		USER_REGSET_NOTE_TYPE(PRFPREG),
 		.n = sizeof(struct user_fp) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
diff --git a/arch/csky/kernel/setup.c b/arch/csky/kernel/setup.c
index fe715b707fd0..e0d6ca86ea8c 100644
--- a/arch/csky/kernel/setup.c
+++ b/arch/csky/kernel/setup.c
@@ -12,6 +12,45 @@
 #include <asm/mmu_context.h>
 #include <asm/pgalloc.h>
 
+#ifdef CONFIG_BLK_DEV_INITRD
+static void __init setup_initrd(void)
+{
+	unsigned long size;
+
+	if (initrd_start >= initrd_end) {
+		pr_err("initrd not found or empty");
+		goto disable;
+	}
+
+	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
+		pr_err("initrd extends beyond end of memory");
+		goto disable;
+	}
+
+	size = initrd_end - initrd_start;
+
+	if (memblock_is_region_reserved(__pa(initrd_start), size)) {
+		pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region",
+		       __pa(initrd_start), size);
+		goto disable;
+	}
+
+	memblock_reserve(__pa(initrd_start), size);
+
+	pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",
+		(void *)(initrd_start), size);
+
+	initrd_below_start_ok = 1;
+
+	return;
+
+disable:
+	initrd_start = initrd_end = 0;
+
+	pr_err(" - disabling initrd\n");
+}
+#endif
+
 static void __init csky_memblock_init(void)
 {
 	unsigned long lowmem_size = PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
@@ -40,6 +79,10 @@ static void __init csky_memblock_init(void)
 		max_low_pfn = min_low_pfn + sseg_size;
 	}
 
+#ifdef CONFIG_BLK_DEV_INITRD
+	setup_initrd();
+#endif
+
 	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
 
 	mmu_init(min_low_pfn, max_low_pfn);
diff --git a/arch/csky/kernel/vdso/Makefile b/arch/csky/kernel/vdso/Makefile
index 069ef0b17fe5..a3042287a070 100644
--- a/arch/csky/kernel/vdso/Makefile
+++ b/arch/csky/kernel/vdso/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 # Include the generic Makefile to check the built vdso.
-include $(srctree)/lib/vdso/Makefile
+include $(srctree)/lib/vdso/Makefile.include
 
 # Symbols present in the vdso
 vdso-syms  += rt_sigreturn
diff --git a/arch/csky/mm/fault.c b/arch/csky/mm/fault.c
index a885518ce1dd..a6ca7dff4215 100644
--- a/arch/csky/mm/fault.c
+++ b/arch/csky/mm/fault.c
@@ -277,7 +277,7 @@ retry:
 	if (fault & VM_FAULT_COMPLETED)
 		return;
 
-	if (unlikely((fault & VM_FAULT_RETRY) && (flags & FAULT_FLAG_ALLOW_RETRY))) {
+	if (unlikely(fault & VM_FAULT_RETRY)) {
 		flags |= FAULT_FLAG_TRIED;
 
 		/*
diff --git a/arch/csky/mm/init.c b/arch/csky/mm/init.c
index bde7cabd23df..573da66b2543 100644
--- a/arch/csky/mm/init.c
+++ b/arch/csky/mm/init.c
@@ -42,73 +42,6 @@ unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
 						__page_aligned_bss;
 EXPORT_SYMBOL(empty_zero_page);
 
-#ifdef CONFIG_BLK_DEV_INITRD
-static void __init setup_initrd(void)
-{
-	unsigned long size;
-
-	if (initrd_start >= initrd_end) {
-		pr_err("initrd not found or empty");
-		goto disable;
-	}
-
-	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
-		pr_err("initrd extends beyond end of memory");
-		goto disable;
-	}
-
-	size = initrd_end - initrd_start;
-
-	if (memblock_is_region_reserved(__pa(initrd_start), size)) {
-		pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region",
-		       __pa(initrd_start), size);
-		goto disable;
-	}
-
-	memblock_reserve(__pa(initrd_start), size);
-
-	pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",
-		(void *)(initrd_start), size);
-
-	initrd_below_start_ok = 1;
-
-	return;
-
-disable:
-	initrd_start = initrd_end = 0;
-
-	pr_err(" - disabling initrd\n");
-}
-#endif
-
-void __init mem_init(void)
-{
-#ifdef CONFIG_HIGHMEM
-	unsigned long tmp;
-
-	set_max_mapnr(highend_pfn - ARCH_PFN_OFFSET);
-#else
-	set_max_mapnr(max_low_pfn - ARCH_PFN_OFFSET);
-#endif
-	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	setup_initrd();
-#endif
-
-	memblock_free_all();
-
-#ifdef CONFIG_HIGHMEM
-	for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) {
-		struct page *page = pfn_to_page(tmp);
-
-		/* FIXME not sure about */
-		if (!memblock_is_reserved(tmp << PAGE_SHIFT))
-			free_highmem_page(page);
-	}
-#endif
-}
-
 void free_initmem(void)
 {
 	free_initmem_default(-1);
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 3eb51fbe804e..d987ba368ed6 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -20,7 +20,6 @@ config HEXAGON
 	# select ARCH_HAS_CPU_IDLE_WAIT
 	# select GPIOLIB
 	# select HAVE_CLK
-	# select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_ATOMIC64
 	select HAVE_PERF_EVENTS
 	# GENERIC_ALLOCATOR is used by dma_alloc_coherent()
diff --git a/arch/hexagon/Makefile b/arch/hexagon/Makefile
index 92d005958dfb..ff172cbe5881 100644
--- a/arch/hexagon/Makefile
+++ b/arch/hexagon/Makefile
@@ -32,3 +32,9 @@ KBUILD_LDFLAGS += $(ldflags-y)
 TIR_NAME := r19
 KBUILD_CFLAGS += -ffixed-$(TIR_NAME) -DTHREADINFO_REG=$(TIR_NAME) -D__linux__
 KBUILD_AFLAGS += -DTHREADINFO_REG=$(TIR_NAME)
+
+# Disable HexagonConstExtenders pass for LLVM versions prior to 19.1.0
+# https://github.com/llvm/llvm-project/issues/99714
+ifneq ($(call clang-min-version, 190100),y)
+KBUILD_CFLAGS += -mllvm -hexagon-cext=false
+endif
diff --git a/arch/hexagon/configs/comet_defconfig b/arch/hexagon/configs/comet_defconfig
index 6cb764947596..83b7626550c8 100644
--- a/arch/hexagon/configs/comet_defconfig
+++ b/arch/hexagon/configs/comet_defconfig
@@ -46,10 +46,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
@@ -70,12 +69,7 @@ CONFIG_INET=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
 CONFIG_FRAME_WARN=0
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/hexagon/include/asm/bitops.h b/arch/hexagon/include/asm/bitops.h
index 160d8f37fa1a..b23cb13833af 100644
--- a/arch/hexagon/include/asm/bitops.h
+++ b/arch/hexagon/include/asm/bitops.h
@@ -200,7 +200,7 @@ arch_test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
  *
  * Undefined if no zero exists, so code should check against ~0UL first.
  */
-static inline long ffz(int x)
+static inline long __attribute_const__ ffz(int x)
 {
 	int r;
 
@@ -217,7 +217,7 @@ static inline long ffz(int x)
  * This is defined the same way as ffs.
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	int r;
 
@@ -238,7 +238,7 @@ static inline int fls(unsigned int x)
  * the libc and compiler builtin ffs routines, therefore
  * differs in spirit from the above ffz (man ffs).
  */
-static inline int ffs(int x)
+static inline __attribute_const__ int ffs(int x)
 {
 	int r;
 
@@ -260,7 +260,7 @@ static inline int ffs(int x)
  * bits_per_long assumed to be 32
  * numbering starts at 0 I think (instead of 1 like ffs)
  */
-static inline unsigned long __ffs(unsigned long word)
+static inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 	int num;
 
@@ -278,7 +278,7 @@ static inline unsigned long __ffs(unsigned long word)
  * Undefined if no set bit exists, so code should check against 0 first.
  * bits_per_long assumed to be 32
  */
-static inline unsigned long __fls(unsigned long word)
+static inline __attribute_const__ unsigned long __fls(unsigned long word)
 {
 	int num;
 
diff --git a/arch/hexagon/include/asm/cmpxchg.h b/arch/hexagon/include/asm/cmpxchg.h
index bf6cf5579cf4..9c58fb81f7fd 100644
--- a/arch/hexagon/include/asm/cmpxchg.h
+++ b/arch/hexagon/include/asm/cmpxchg.h
@@ -56,7 +56,7 @@ __arch_xchg(unsigned long x, volatile void *ptr, int size)
 	__typeof__(ptr) __ptr = (ptr);				\
 	__typeof__(*(ptr)) __old = (old);			\
 	__typeof__(*(ptr)) __new = (new);			\
-	__typeof__(*(ptr)) __oldval = 0;			\
+	__typeof__(*(ptr)) __oldval = (__typeof__(*(ptr))) 0;	\
 								\
 	asm volatile(						\
 		"1:	%0 = memw_locked(%1);\n"		\
diff --git a/arch/hexagon/include/asm/pgalloc.h b/arch/hexagon/include/asm/pgalloc.h
index 55988625e6fb..937a11ef4c33 100644
--- a/arch/hexagon/include/asm/pgalloc.h
+++ b/arch/hexagon/include/asm/pgalloc.h
@@ -22,7 +22,7 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *pgd;
 
-	pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+	pgd = __pgd_alloc(mm, 0);
 
 	/*
 	 * There may be better ways to do this, but to ensure
@@ -87,10 +87,7 @@ static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
 		max_kernel_seg = pmdindex;
 }
 
-#define __pte_free_tlb(tlb, pte, addr)				\
-do {								\
-	pagetable_pte_dtor((page_ptdesc(pte)));			\
-	tlb_remove_page_ptdesc((tlb), (page_ptdesc(pte)));	\
-} while (0)
+#define __pte_free_tlb(tlb, pte, addr)	\
+	tlb_remove_ptdesc((tlb), page_ptdesc(pte))
 
 #endif
diff --git a/arch/hexagon/include/asm/pgtable.h b/arch/hexagon/include/asm/pgtable.h
index 8c5b7a1c3d90..fbf24d1d1ca6 100644
--- a/arch/hexagon/include/asm/pgtable.h
+++ b/arch/hexagon/include/asm/pgtable.h
@@ -238,9 +238,6 @@ static inline int pte_present(pte_t pte)
 	return pte_val(pte) & _PAGE_PRESENT;
 }
 
-/* mk_pte - make a PTE out of a page pointer and protection bits */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
 /* pte_page - returns a page (frame pointer/descriptor?) based on a PTE */
 #define pte_page(x) pfn_to_page(pte_pfn(x))
 
@@ -390,7 +387,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 		(((type & 0x1f) << 1) | \
 		 ((offset & 0x3ffff8) << 10) | ((offset & 0x7) << 7)) })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
diff --git a/arch/hexagon/include/asm/setup.h b/arch/hexagon/include/asm/setup.h
new file mode 100644
index 000000000000..9f2749cd4052
--- /dev/null
+++ b/arch/hexagon/include/asm/setup.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_HEXAGON_SETUP_H
+#define _ASM_HEXAGON_SETUP_H
+
+#include <linux/init.h>
+#include <uapi/asm/setup.h>
+
+extern char external_cmdline_buffer;
+
+void __init setup_arch_memory(void);
+
+#endif
diff --git a/arch/hexagon/include/asm/syscall.h b/arch/hexagon/include/asm/syscall.h
index f6e454f18038..70637261817a 100644
--- a/arch/hexagon/include/asm/syscall.h
+++ b/arch/hexagon/include/asm/syscall.h
@@ -26,6 +26,13 @@ static inline long syscall_get_nr(struct task_struct *task,
 	return regs->r06;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->r06 = nr;
+}
+
 static inline void syscall_get_arguments(struct task_struct *task,
 					 struct pt_regs *regs,
 					 unsigned long *args)
@@ -33,6 +40,13 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	memcpy(args, &(&regs->r00)[0], 6 * sizeof(args[0]));
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	memcpy(&(&regs->r00)[0], args, 6 * sizeof(args[0]));
+}
+
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
@@ -45,6 +59,13 @@ static inline long syscall_get_return_value(struct task_struct *task,
 	return regs->r00;
 }
 
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->r00 = (long) error ?: val;
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	return AUDIT_ARCH_HEXAGON;
diff --git a/arch/hexagon/include/uapi/asm/setup.h b/arch/hexagon/include/uapi/asm/setup.h
index 8ce9428b1583..598f74f671f6 100644
--- a/arch/hexagon/include/uapi/asm/setup.h
+++ b/arch/hexagon/include/uapi/asm/setup.h
@@ -17,19 +17,9 @@
  * 02110-1301, USA.
  */
 
-#ifndef _ASM_SETUP_H
-#define _ASM_SETUP_H
-
-#ifdef __KERNEL__
-#include <linux/init.h>
-#else
-#define __init
-#endif
+#ifndef _UAPI_ASM_HEXAGON_SETUP_H
+#define _UAPI_ASM_HEXAGON_SETUP_H
 
 #include <asm-generic/setup.h>
 
-extern char external_cmdline_buffer;
-
-void __init setup_arch_memory(void);
-
 #endif
diff --git a/arch/hexagon/kernel/Makefile b/arch/hexagon/kernel/Makefile
index 3fdf937eb572..8e0fb4a62315 100644
--- a/arch/hexagon/kernel/Makefile
+++ b/arch/hexagon/kernel/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-extra-y := vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
 
 obj-y += head.o
 obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/hexagon/kernel/asm-offsets.c b/arch/hexagon/kernel/asm-offsets.c
index 03a7063f9456..50eea9fa6f13 100644
--- a/arch/hexagon/kernel/asm-offsets.c
+++ b/arch/hexagon/kernel/asm-offsets.c
@@ -8,6 +8,7 @@
  *
  * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/compat.h>
 #include <linux/types.h>
diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c
index 2a77bfd75694..15b4992bfa29 100644
--- a/arch/hexagon/kernel/process.c
+++ b/arch/hexagon/kernel/process.c
@@ -52,7 +52,7 @@ void arch_cpu_idle(void)
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct thread_info *ti = task_thread_info(p);
diff --git a/arch/hexagon/kernel/ptrace.c b/arch/hexagon/kernel/ptrace.c
index 905b06790ab7..2093eee143e1 100644
--- a/arch/hexagon/kernel/ptrace.c
+++ b/arch/hexagon/kernel/ptrace.c
@@ -137,7 +137,7 @@ enum hexagon_regset {
 
 static const struct user_regset hexagon_regsets[] = {
 	[REGSET_GENERAL] = {
-		.core_note_type = NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n = ELF_NGREG,
 		.size = sizeof(unsigned long),
 		.align = sizeof(unsigned long),
diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c
index f0f207e2a694..6f851e1cd4ee 100644
--- a/arch/hexagon/kernel/time.c
+++ b/arch/hexagon/kernel/time.c
@@ -170,8 +170,7 @@ static void __init time_init_deferred(void)
 
 	ce_dev->cpumask = cpu_all_mask;
 
-	if (!resource)
-		resource = rtos_timer_device.resource;
+	resource = rtos_timer_device.resource;
 
 	/*  ioremap here means this has to run later, after paging init  */
 	rtos_timer = ioremap(resource->start, resource_size(resource));
diff --git a/arch/hexagon/kernel/traps.c b/arch/hexagon/kernel/traps.c
index 75e062722d28..e732aa01c2ff 100644
--- a/arch/hexagon/kernel/traps.c
+++ b/arch/hexagon/kernel/traps.c
@@ -135,7 +135,7 @@ static void do_show_stack(struct task_struct *task, unsigned long *fp,
 		}
 
 		/* Attempt to continue past exception. */
-		if (0 == newfp) {
+		if (!newfp) {
 			struct pt_regs *regs = (struct pt_regs *) (((void *)fp)
 						+ 8);
 
@@ -195,8 +195,10 @@ int die(const char *str, struct pt_regs *regs, long err)
 	printk(KERN_EMERG "Oops: %s[#%d]:\n", str, ++die.counter);
 
 	if (notify_die(DIE_OOPS, str, regs, err, pt_cause(regs), SIGSEGV) ==
-	    NOTIFY_STOP)
+	    NOTIFY_STOP) {
+		spin_unlock_irq(&die.lock);
 		return 1;
+	}
 
 	print_modules();
 	show_regs(regs);
diff --git a/arch/hexagon/mm/init.c b/arch/hexagon/mm/init.c
index 3458f39ca2ac..34eb9d424b96 100644
--- a/arch/hexagon/mm/init.c
+++ b/arch/hexagon/mm/init.c
@@ -43,32 +43,6 @@ DEFINE_SPINLOCK(kmap_gen_lock);
 /*  checkpatch says don't init this to 0.  */
 unsigned long long kmap_generation;
 
-/*
- * mem_init - initializes memory
- *
- * Frees up bootmem
- * Fixes up more stuff for HIGHMEM
- * Calculates and displays memory available/used
- */
-void __init mem_init(void)
-{
-	/*  No idea where this is actually declared.  Seems to evade LXR.  */
-	memblock_free_all();
-
-	/*
-	 *  To-Do:  someone somewhere should wipe out the bootmem map
-	 *  after we're done?
-	 */
-
-	/*
-	 * This can be moved to some more virtual-memory-specific
-	 * initialization hook at some point.  Set the init_mm
-	 * descriptors "context" value to point to the initial
-	 * kernel segment table's physical address.
-	 */
-	init_mm.context.ptbase = __pa(init_mm.pgd);
-}
-
 void sync_icache_dcache(pte_t pte)
 {
 	unsigned long addr;
@@ -104,10 +78,10 @@ static void __init paging_init(void)
 	free_area_init(max_zone_pfn);  /*  sets up the zonelists and mem_map  */
 
 	/*
-	 * Start of high memory area.  Will probably need something more
-	 * fancy if we...  get more fancy.
+	 * Set the init_mm descriptors "context" value to point to the
+	 * initial kernel segment table's physical address.
 	 */
-	high_memory = (void *)((bootmem_lastpg + 1) << PAGE_SHIFT);
+	init_mm.context.ptbase = __pa(init_mm.pgd);
 }
 
 #ifndef DMA_RESERVE
diff --git a/arch/loongarch/Kbuild b/arch/loongarch/Kbuild
index bfa21465d83a..beb8499dd8ed 100644
--- a/arch/loongarch/Kbuild
+++ b/arch/loongarch/Kbuild
@@ -4,7 +4,6 @@ obj-y += net/
 obj-y += vdso/
 
 obj-$(CONFIG_KVM) += kvm/
-obj-$(CONFIG_BUILTIN_DTB) += boot/dts/
 
 # for cleaning
 subdir- += boot
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index dae3a9104ca6..5b1116733d88 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -9,6 +9,7 @@ config LOONGARCH
 	select ACPI_PPTT if ACPI
 	select ACPI_SYSTEM_POWER_STATES_SUPPORT	if ACPI
 	select ARCH_BINFMT_ELF_STATE
+	select ARCH_NEEDS_DEFER_KASAN
 	select ARCH_DISABLE_KASAN_INLINE
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
@@ -24,11 +25,12 @@ config LOONGARCH
 	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PREEMPT_LAZY
-	select ARCH_HAS_PTE_DEVMAP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SET_MEMORY
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+	select ARCH_HAS_UBSAN
+	select ARCH_HAS_VDSO_ARCH_DATA
 	select ARCH_INLINE_READ_LOCK if !PREEMPTION
 	select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
 	select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION
@@ -66,10 +68,15 @@ config LOONGARCH
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_SUPPORTS_LTO_CLANG
 	select ARCH_SUPPORTS_LTO_CLANG_THIN
+	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
 	select ARCH_SUPPORTS_NUMA_BALANCING
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_SUPPORTS_RT
+	select ARCH_SUPPORTS_SCHED_SMT if SMP
+	select ARCH_SUPPORTS_SCHED_MC  if SMP
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_MEMTEST
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
 	select ARCH_WANT_DEFAULT_BPF_JIT
@@ -81,6 +88,7 @@ config LOONGARCH
 	select BUILDTIME_TABLE_SORT
 	select COMMON_CLK
 	select CPU_PM
+	select EDAC_SUPPORT
 	select EFI
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE
@@ -104,7 +112,6 @@ config LOONGARCH
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
-	select GENERIC_VDSO_TIME_NS
 	select GPIOLIB
 	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
@@ -113,6 +120,7 @@ config LOONGARCH
 	select HAVE_ARCH_KASAN
 	select HAVE_ARCH_KFENCE
 	select HAVE_ARCH_KGDB if PERF_EVENTS
+	select HAVE_ARCH_KSTACK_ERASE
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	select HAVE_ARCH_SECCOMP
@@ -128,16 +136,18 @@ config LOONGARCH
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_ARGS
+	select HAVE_FTRACE_REGS_HAVING_PT_REGS
 	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_EBPF_JIT
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !ARCH_STRICT_ALIGN
 	select HAVE_EXIT_THREAD
+	select HAVE_GENERIC_TIF_BITS
 	select HAVE_GUP_FAST
-	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FTRACE_GRAPH_FUNC
 	select HAVE_FUNCTION_ARG_ACCESS_API
 	select HAVE_FUNCTION_ERROR_INJECTION
-	select HAVE_FUNCTION_GRAPH_RETVAL if HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
 	select HAVE_GCC_PLUGINS
@@ -171,7 +181,7 @@ config LOONGARCH
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_TIF_NOHZ
-	select HAVE_VIRT_CPU_ACCOUNTING_GEN if !SMP
+	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select IRQ_FORCED_THREADING
 	select IRQ_LOONGARCH_CPU
 	select LOCK_MM_AND_FIND_VMA
@@ -179,6 +189,7 @@ config LOONGARCH
 	select MODULES_USE_ELF_RELA if MODULES
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
 	select NEED_PER_CPU_PAGE_FIRST_CHUNK
+	select NUMA_MEMBLKS if NUMA
 	select OF
 	select OF_EARLY_FLATTREE
 	select PCI
@@ -245,7 +256,7 @@ config MACH_LOONGSON64
 	def_bool 64BIT
 
 config FIX_EARLYCON_MEM
-	def_bool y
+	def_bool !ARCH_IOREMAP
 
 config PGTABLE_2LEVEL
 	bool
@@ -287,6 +298,13 @@ config AS_HAS_LBT_EXTENSION
 config AS_HAS_LVZ_EXTENSION
 	def_bool $(as-instr,hvcl 0)
 
+config CC_HAS_ANNOTATE_TABLEJUMP
+	def_bool $(cc-option,-mannotate-tablejump)
+
+config RUSTC_HAS_ANNOTATE_TABLEJUMP
+	depends on RUST
+	def_bool $(rustc-option,-Cllvm-args=--loongarch-annotate-tablejump)
+
 menu "Kernel type and options"
 
 source "kernel/Kconfig.hz"
@@ -378,8 +396,8 @@ config CMDLINE_BOOTLOADER
 config CMDLINE_EXTEND
 	bool "Use built-in to extend bootloader kernel arguments"
 	help
-	  The command-line arguments provided during boot will be
-	  appended to the built-in command line. This is useful in
+	  The built-in command line will be appended to the command-
+	  line arguments provided during boot. This is useful in
 	  cases where the provided arguments are insufficient and
 	  you don't want to or cannot modify them.
 
@@ -396,6 +414,7 @@ endchoice
 config BUILTIN_DTB
 	bool "Enable built-in dtb in kernel"
 	depends on OF
+	select GENERIC_BUILTIN_DTB
 	help
 	  Some existing systems do not provide a canonical device tree to
 	  the kernel at boot time. Let's provide a device tree table in the
@@ -436,14 +455,6 @@ config EFI_STUB
 	  This kernel feature allows the kernel to be loaded directly by
 	  EFI firmware without the use of a bootloader.
 
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on SMP
-	default y
-	help
-	  Improves scheduler's performance when there are multiple
-	  threads in one physical core.
-
 config SMP
 	bool "Multi-Processing support"
 	help
@@ -473,10 +484,10 @@ config HOTPLUG_CPU
 	  Say N if you want to disable CPU hotplug.
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-256)"
-	range 2 256
+	int "Maximum number of CPUs (2-2048)"
+	range 2 2048
+	default "2048"
 	depends on SMP
-	default "64"
 	help
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.
@@ -542,10 +553,14 @@ config ARCH_STRICT_ALIGN
 	  -mstrict-align build parameter to prevent unaligned accesses.
 
 	  CPUs with h/w unaligned access support:
-	  Loongson-2K2000/2K3000/3A5000/3C5000/3D5000.
+	  Loongson-2K2000/2K3000 and all of Loongson-3 series processors
+	  based on LoongArch.
 
 	  CPUs without h/w unaligned access support:
-	  Loongson-2K500/2K1000.
+	  Loongson-2K0300/2K0500/2K1000.
+
+	  If you want to make sure whether to support unaligned memory access
+	  on your hardware, please read the bit 20 (UAL) of CPUCFG1 register.
 
 	  This option is enabled by default to make the kernel be able to run
 	  on all LoongArch systems. But you can disable it manually if you want
@@ -604,6 +619,16 @@ config CPU_HAS_PREFETCH
 config ARCH_SUPPORTS_KEXEC
 	def_bool y
 
+config ARCH_SUPPORTS_KEXEC_FILE
+	def_bool 64BIT
+
+config ARCH_SELECTS_KEXEC_FILE
+	def_bool 64BIT
+	depends on KEXEC_FILE
+	select KEXEC_ELF
+	select RELOCATABLE
+	select HAVE_IMA_KEXEC if IMA
+
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
index 567bd122a9ee..96ca1a688984 100644
--- a/arch/loongarch/Makefile
+++ b/arch/loongarch/Makefile
@@ -101,7 +101,22 @@ KBUILD_AFLAGS			+= $(call cc-option,-mthin-add-sub) $(call cc-option,-Wa$(comma)
 KBUILD_CFLAGS			+= $(call cc-option,-mthin-add-sub) $(call cc-option,-Wa$(comma)-mthin-add-sub)
 
 ifdef CONFIG_OBJTOOL
-KBUILD_CFLAGS			+= -fno-jump-tables
+ifdef CONFIG_CC_HAS_ANNOTATE_TABLEJUMP
+KBUILD_CFLAGS			+= -mannotate-tablejump
+else
+KBUILD_CFLAGS			+= -fno-jump-tables # keep compatibility with older compilers
+endif
+ifdef CONFIG_RUSTC_HAS_ANNOTATE_TABLEJUMP
+KBUILD_RUSTFLAGS		+= -Cllvm-args=--loongarch-annotate-tablejump
+else
+KBUILD_RUSTFLAGS		+= $(if $(call rustc-min-version,109300),-Cjump-tables=n,-Zno-jump-tables) # keep compatibility with older compilers
+endif
+ifdef CONFIG_LTO_CLANG
+# The annotate-tablejump option can not be passed to LLVM backend when LTO is enabled.
+# Ensure it is aware of linker with LTO, '--loongarch-annotate-tablejump' also needs to
+# be passed via '-mllvm' to ld.lld.
+KBUILD_LDFLAGS			+= $(call ld-option,-mllvm --loongarch-annotate-tablejump)
+endif
 endif
 
 KBUILD_RUSTFLAGS		+= --target=loongarch64-unknown-none-softfloat -Ccode-model=small
@@ -114,7 +129,7 @@ KBUILD_RUSTFLAGS_KERNEL		+= -Crelocation-model=pie
 LDFLAGS_vmlinux			+= -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs)
 endif
 
-cflags-y += $(call cc-option, -mno-check-zero-division)
+cflags-y += $(call cc-option, -mno-check-zero-division -fno-isolate-erroneous-paths-dereference)
 
 ifndef CONFIG_KASAN
 cflags-y += -fno-builtin-memcpy -fno-builtin-memmove -fno-builtin-memset
@@ -177,11 +192,14 @@ vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@
 
 install:
-	$(Q)install -D -m 755 $(KBUILD_IMAGE) $(INSTALL_PATH)/$(image-name-y)-$(KERNELRELEASE)
-	$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
-	$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
+	$(call cmd,install)
 
 define archhelp
-	echo '  install              - install kernel into $(INSTALL_PATH)'
+	echo '  vmlinux.elf    - Uncompressed ELF kernel image (arch/loongarch/boot/vmlinux.elf)'
+	echo '  vmlinux.efi    - Uncompressed EFI kernel image (arch/loongarch/boot/vmlinux.efi)'
+	echo '  vmlinuz.efi    - GZIP/ZSTD-compressed EFI kernel image (arch/loongarch/boot/vmlinuz.efi)'
+	echo '                   Default when CONFIG_EFI_ZBOOT=y'
+	echo '  install        - Install kernel using (your) ~/bin/$(INSTALLKERNEL) or'
+	echo '                   (distribution) /sbin/$(INSTALLKERNEL) or install.sh to $$(INSTALL_PATH)'
 	echo
 endef
diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile
index 747d0c3f6389..15d5e14fe418 100644
--- a/arch/loongarch/boot/dts/Makefile
+++ b/arch/loongarch/boot/dts/Makefile
@@ -1,5 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb loongson-2k2000-ref.dtb
-
-obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME))
diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
index a34734a6c3ce..018ed904352a 100644
--- a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
+++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
@@ -41,6 +41,15 @@
 	};
 };
 
+&apbdma3 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	bus-width = <4>;
+};
+
 &gmac0 {
 	status = "okay";
 
diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
index 3b38ff8853a7..357de4ca7555 100644
--- a/arch/loongarch/boot/dts/loongson-2k0500.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
@@ -104,7 +104,7 @@
 			status = "disabled";
 		};
 
-		dma-controller@1fe10c20 {
+		apbdma2: dma-controller@1fe10c20 {
 			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
 			reg = <0 0x1fe10c20 0 0x8>;
 			interrupt-parent = <&eiointc>;
@@ -114,7 +114,7 @@
 			status = "disabled";
 		};
 
-		dma-controller@1fe10c30 {
+		apbdma3: dma-controller@1fe10c30 {
 			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
 			reg = <0 0x1fe10c30 0 0x8>;
 			interrupt-parent = <&eiointc>;
@@ -169,6 +169,166 @@
 			interrupts = <3>;
 		};
 
+		pwm@1ff5c000 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c000 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c010 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c010 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c020 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c020 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c030 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c030 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c040 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c040 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c050 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c050 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c060 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c060 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c070 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c070 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c080 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c080 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c090 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c090 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0a0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0a0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0b0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0b0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0c0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0c0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0d0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0d0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0e0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0e0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0f0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0f0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		gmac0: ethernet@1f020000 {
 			compatible = "snps,dwmac-3.70a";
 			reg = <0x0 0x1f020000 0x0 0x10000>;
@@ -220,7 +380,7 @@
 		};
 
 		uart0: serial@1ff40800 {
-			compatible = "ns16550a";
+			compatible = "loongson,ls2k0500-uart", "ns16550a";
 			reg = <0x0 0x1ff40800 0x0 0x10>;
 			clock-frequency = <100000000>;
 			interrupt-parent = <&eiointc>;
@@ -277,6 +437,30 @@
 			status = "disabled";
 		};
 
+		mmc0: mmc@1ff64000 {
+			compatible = "loongson,ls2k0500-mmc";
+			reg = <0 0x1ff64000 0 0x2000>,
+			      <0 0x1fe10100 0 0x4>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <57>;
+			dmas = <&apbdma3 0>;
+			dma-names = "rx-tx";
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			status = "disabled";
+		};
+
+		mmc@1ff66000 {
+			compatible = "loongson,ls2k0500-mmc";
+			reg = <0 0x1ff66000 0 0x2000>,
+			      <0 0x1fe10100 0 0x4>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <58>;
+			dmas = <&apbdma2 0>;
+			dma-names = "rx-tx";
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			status = "disabled";
+		};
+
 		pmc: power-management@1ff6c000 {
 			compatible = "loongson,ls2k0500-pmc", "syscon";
 			reg = <0x0 0x1ff6c000 0x0 0x58>;
diff --git a/arch/loongarch/boot/dts/loongson-2k1000-ref.dts b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
index 23cf26cc3e5f..d9a452ada5d7 100644
--- a/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
+++ b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include "dt-bindings/thermal/thermal.h"
 #include "loongson-2k1000.dtsi"
 
 / {
@@ -38,6 +39,26 @@
 			linux,cma-default;
 		};
 	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <255 153 85 25>;
+		pwms = <&pwm1 0 100000 0>;
+		#cooling-cells = <2>;
+	};
+};
+
+&apbdma1 {
+	status = "okay";
+};
+
+&mmc {
+	status = "okay";
+
+	pinctrl-0 = <&sdio_pins_default>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	cd-gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 };
 
 &gmac0 {
@@ -90,10 +111,21 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-	spidev@0 {
-		compatible = "rohm,dh2228fv";
-		spi-max-frequency = <100000000>;
-		reg = <0>;
+};
+
+&pwm1 {
+	status = "okay";
+
+	pinctrl-0 = <&pwm1_pins_default>;
+	pinctrl-names = "default";
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert>;
+			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
 	};
 };
 
diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
index 8dff2aa52417..60ab425f793f 100644
--- a/arch/loongarch/boot/dts/loongson-2k1000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
@@ -68,7 +68,7 @@
 	};
 
 	thermal-zones {
-		cpu-thermal {
+		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tsensor 0>;
@@ -187,14 +187,14 @@
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
-				     <>,
-				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 IRQ_TYPE_NONE>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_NONE>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
 				     <26 IRQ_TYPE_LEVEL_HIGH>,
@@ -209,13 +209,13 @@
 				     <27 IRQ_TYPE_LEVEL_HIGH>,
 				     <27 IRQ_TYPE_LEVEL_HIGH>,
 				     <27 IRQ_TYPE_LEVEL_HIGH>,
-				     <>,
+				     <0 IRQ_TYPE_NONE>,
 				     <27 IRQ_TYPE_LEVEL_HIGH>,
 				     <27 IRQ_TYPE_LEVEL_HIGH>,
 				     <27 IRQ_TYPE_LEVEL_HIGH>,
 				     <27 IRQ_TYPE_LEVEL_HIGH>,
-				     <>,
-				     <>,
+				     <0 IRQ_TYPE_NONE>,
+				     <0 IRQ_TYPE_NONE>,
 				     <27 IRQ_TYPE_LEVEL_HIGH>,
 				     <27 IRQ_TYPE_LEVEL_HIGH>,
 				     <27 IRQ_TYPE_LEVEL_HIGH>,
@@ -256,7 +256,7 @@
 			status = "disabled";
 		};
 
-		dma-controller@1fe00c10 {
+		apbdma1: dma-controller@1fe00c10 {
 			compatible = "loongson,ls2k1000-apbdma";
 			reg = <0x0 0x1fe00c10 0x0 0x8>;
 			interrupt-parent = <&liointc1>;
@@ -297,7 +297,7 @@
 		};
 
 		uart0: serial@1fe20000 {
-			compatible = "ns16550a";
+			compatible = "loongson,ls2k1000-uart", "loongson,ls2k0500-uart", "ns16550a";
 			reg = <0x0 0x1fe20000 0x0 0x10>;
 			clock-frequency = <125000000>;
 			interrupt-parent = <&liointc0>;
@@ -322,6 +322,46 @@
 			status = "disabled";
 		};
 
+		pwm@1fe22000 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22000 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@1fe22010 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22010 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1fe22020 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22020 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1fe22030 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22030 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		pmc: power-management@1fe27000 {
 			compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
 			reg = <0x0 0x1fe27000 0x0 0x58>;
@@ -365,6 +405,18 @@
 			status = "disabled";
 		};
 
+		mmc: mmc@1fe2c000 {
+			compatible = "loongson,ls2k1000-mmc";
+			reg = <0 0x1fe2c000 0 0x68>,
+			      <0 0x1fe00438 0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			dmas = <&apbdma1 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
 		spi0: spi@1fff0220 {
 			compatible = "loongson,ls2k1000-spi";
 			reg = <0x0 0x1fff0220 0x0 0x10>;
diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
index ea9e6985d0e9..3c6b12220386 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
+++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
@@ -39,6 +39,16 @@
 	};
 };
 
+&emmc {
+	status = "okay";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
index b4ff55a33e90..6c77b86ee06c 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -165,6 +165,66 @@
 			interrupt-parent = <&eiointc>;
 		};
 
+		pwm@100a0000 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0000 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0100 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0100 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0200 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0200 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0300 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0300 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0400 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0400 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0500 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0500 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		rtc0: rtc@100d0100 {
 			compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc";
 			reg = <0x0 0x100d0100 0x0 0x100>;
@@ -190,7 +250,7 @@
 		};
 
 		uart0: serial@1fe001e0 {
-			compatible = "ns16550a";
+			compatible = "loongson,ls2k2000-uart", "loongson,ls2k1500-uart", "ns16550a";
 			reg = <0x0 0x1fe001e0 0x0 0x10>;
 			clock-frequency = <100000000>;
 			interrupt-parent = <&liointc>;
@@ -199,6 +259,24 @@
 			status = "disabled";
 		};
 
+		emmc: mmc@79990000 {
+			compatible = "loongson,ls2k2000-mmc";
+			reg = <0x0 0x79990000 0x0 0x1000>;
+			interrupt-parent = <&pic>;
+			interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_EMMC_CLK>;
+			status = "disabled";
+		};
+
+		mmc@79991000 {
+			compatible = "loongson,ls2k2000-mmc";
+			reg = <0x0 0x79991000 0x0 0x1000>;
+			interrupt-parent = <&pic>;
+			interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_EMMC_CLK>;
+			status = "disabled";
+		};
+
 		pcie@1a000000 {
 			compatible = "loongson,ls2k-pci";
 			reg = <0x0 0x1a000000 0x0 0x02000000>,
diff --git a/arch/loongarch/boot/install.sh b/arch/loongarch/boot/install.sh
new file mode 100755
index 000000000000..daac197d3315
--- /dev/null
+++ b/arch/loongarch/boot/install.sh
@@ -0,0 +1,56 @@
+#!/bin/sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+#
+# "make install" script for the LoongArch Linux port
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+
+set -e
+
+case "${2##*/}" in
+vmlinux.elf)
+  echo "Installing uncompressed vmlinux.elf kernel"
+  base=vmlinux
+  ;;
+vmlinux.efi)
+  echo "Installing uncompressed vmlinux.efi kernel"
+  base=vmlinux
+  ;;
+vmlinuz.efi)
+  echo "Installing gzip/zstd compressed vmlinuz.efi kernel"
+  base=vmlinuz
+  ;;
+*)
+ echo "Warning: Unexpected kernel type"
+ exit 1
+ ;;
+esac
+
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
+fi
+cat $2 > $4/$base-$1
+
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1
+
+# Install kernel config file
+if [ -f $4/config-$1 ]; then
+  mv $4/config-$1 $4/config-$1.old
+fi
+cp .config $4/config-$1
diff --git a/arch/loongarch/configs/loongson3_defconfig b/arch/loongarch/configs/loongson3_defconfig
index 4dffc90192f7..50e1304e7a6f 100644
--- a/arch/loongarch/configs/loongson3_defconfig
+++ b/arch/loongarch/configs/loongson3_defconfig
@@ -24,9 +24,9 @@ CONFIG_NUMA_BALANCING=y
 CONFIG_MEMCG=y
 CONFIG_BLK_CGROUP=y
 CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_RDMA=y
+CONFIG_CGROUP_DMEM=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
 CONFIG_CPUSETS=y
@@ -45,6 +45,7 @@ CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PERF_EVENTS=y
 CONFIG_KEXEC=y
+CONFIG_KEXEC_FILE=y
 CONFIG_CRASH_DUMP=y
 CONFIG_LOONGARCH=y
 CONFIG_64BIT=y
@@ -55,7 +56,7 @@ CONFIG_DMI=y
 CONFIG_EFI=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
-CONFIG_NR_CPUS=256
+CONFIG_NR_CPUS=2048
 CONFIG_NUMA=y
 CONFIG_CPU_HAS_FPU=y
 CONFIG_CPU_HAS_LSX=y
@@ -106,14 +107,15 @@ CONFIG_CMDLINE_PARTITION=y
 CONFIG_IOSCHED_BFQ=y
 CONFIG_BFQ_GROUP_IOSCHED=y
 CONFIG_BINFMT_MISC=m
-CONFIG_ZPOOL=y
 CONFIG_ZSWAP=y
 CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD=y
-CONFIG_ZBUD=y
-CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
+# CONFIG_MHP_DEFAULT_ONLINE_TYPE_OFFLINE is not set
+CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_AUTO=y
+# CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_KERNEL is not set
+# CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE is not set
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
@@ -153,7 +155,16 @@ CONFIG_INET_ESPINTCP=y
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_UDP_DIAG=y
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BBR=m
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_NV=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_DCTCP=m
+CONFIG_TCP_CONG_CDG=m
+CONFIG_TCP_CONG_BBR=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
@@ -223,7 +234,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -331,15 +341,33 @@ CONFIG_LLC2=m
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_CBS=m
+CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_SKBPRIO=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_CAKE=m
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_PIE=m
+CONFIG_NET_SCH_FQ_PIE=m
 CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_DEFAULT=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_FLOW=m
 CONFIG_NET_CLS_CGROUP=m
 CONFIG_NET_CLS_BPF=m
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_CLS_MATCHALL=m
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=m
 CONFIG_NET_ACT_GACT=m
@@ -407,6 +435,7 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_SYSFB_SIMPLEFB=y
 CONFIG_EFI_ZBOOT=y
 CONFIG_EFI_BOOTLOADER_CONTROL=m
 CONFIG_EFI_CAPSULE_LOADER=m
@@ -420,6 +449,11 @@ CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_CFI_STAA=m
 CONFIG_MTD_RAM=m
 CONFIG_MTD_ROM=m
+CONFIG_MTD_RAW_NAND=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_NAND_LOONGSON=m
+CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
+CONFIG_MTD_NAND_ECC_SW_BCH=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_PARPORT=y
@@ -575,6 +609,11 @@ CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_IGB=y
 CONFIG_IXGBE=y
+CONFIG_I40E=y
+CONFIG_ICE=y
+CONFIG_FM10K=y
+CONFIG_IGC=y
+CONFIG_IDPF=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MELLANOX is not set
 # CONFIG_NET_VENDOR_MICREL is not set
@@ -663,6 +702,10 @@ CONFIG_RTW88_8723DE=m
 CONFIG_RTW88_8723DU=m
 CONFIG_RTW88_8821CE=m
 CONFIG_RTW88_8821CU=m
+CONFIG_RTW88_8821AU=m
+CONFIG_RTW88_8812AU=m
+CONFIG_RTW88_8814AE=m
+CONFIG_RTW88_8814AU=m
 CONFIG_RTW89=m
 CONFIG_RTW89_8851BE=m
 CONFIG_RTW89_8852AE=m
@@ -675,6 +718,9 @@ CONFIG_USB4_NET=m
 CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+CONFIG_KEYBOARD_MATRIX=m
 CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_MOUSE_PS2_SENTELIC=y
@@ -699,8 +745,11 @@ CONFIG_VIRTIO_CONSOLE=y
 CONFIG_IPMI_HANDLER=m
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
+CONFIG_IPMI_LS2K=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_TCG_TPM=m
+CONFIG_TCG_LOONGSON=m
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_PIIX4=y
 CONFIG_I2C_DESIGNWARE_CORE=y
@@ -716,6 +765,10 @@ CONFIG_PINCTRL_LOONGSON2=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_LOONGSON=y
 CONFIG_GPIO_LOONGSON_64BIT=y
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_PCA9570=m
+CONFIG_GPIO_PCF857X=m
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_RESTART=y
 CONFIG_POWER_RESET_SYSCON=y
@@ -726,6 +779,7 @@ CONFIG_SENSORS_LM93=m
 CONFIG_SENSORS_W83795=m
 CONFIG_SENSORS_W83627HF=m
 CONFIG_LOONGSON2_THERMAL=m
+CONFIG_MFD_LOONGSON_SE=m
 CONFIG_RC_CORE=m
 CONFIG_LIRC=y
 CONFIG_RC_DECODERS=y
@@ -746,6 +800,7 @@ CONFIG_MEDIA_PCI_SUPPORT=y
 CONFIG_VIDEO_BT848=m
 CONFIG_DVB_BT8XX=m
 CONFIG_DRM=y
+CONFIG_DRM_LOAD_EDID_FIRMWARE=y
 CONFIG_DRM_RADEON=m
 CONFIG_DRM_RADEON_USERPTR=y
 CONFIG_DRM_AMDGPU=m
@@ -756,9 +811,11 @@ CONFIG_DRM_AST=y
 CONFIG_DRM_QXL=m
 CONFIG_DRM_VIRTIO_GPU=m
 CONFIG_DRM_LOONGSON=y
+CONFIG_DRM_SIMPLEDRM=y
 CONFIG_FB=y
 CONFIG_FB_EFI=y
 CONFIG_FB_RADEON=y
+CONFIG_FIRMWARE_EDID=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=m
 # CONFIG_VGA_CONSOLE is not set
@@ -776,10 +833,26 @@ CONFIG_SND_HDA_HWDEP=y
 CONFIG_SND_HDA_INPUT_BEEP=y
 CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_REALTEK_LIB=y
+CONFIG_SND_HDA_CODEC_ALC260=y
+CONFIG_SND_HDA_CODEC_ALC262=y
+CONFIG_SND_HDA_CODEC_ALC268=y
+CONFIG_SND_HDA_CODEC_ALC269=y
+CONFIG_SND_HDA_CODEC_ALC662=y
+CONFIG_SND_HDA_CODEC_ALC680=y
+CONFIG_SND_HDA_CODEC_ALC861=y
+CONFIG_SND_HDA_CODEC_ALC861VD=y
+CONFIG_SND_HDA_CODEC_ALC880=y
+CONFIG_SND_HDA_CODEC_ALC882=y
 CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_CODEC_HDMI_GENERIC=y
+CONFIG_SND_HDA_CODEC_HDMI_INTEL=y
+CONFIG_SND_HDA_CODEC_HDMI_ATI=y
+CONFIG_SND_HDA_CODEC_HDMI_NVIDIA=y
 CONFIG_SND_HDA_CODEC_CONEXANT=y
 CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_AUDIO_MIDI_V2=y
 CONFIG_SND_SOC=m
 CONFIG_SND_SOC_LOONGSON_CARD=m
 CONFIG_SND_SOC_ES7134=m
@@ -840,7 +913,11 @@ CONFIG_TYPEC_TCPM=m
 CONFIG_TYPEC_TCPCI=m
 CONFIG_TYPEC_UCSI=m
 CONFIG_UCSI_ACPI=m
+CONFIG_MMC=y
+CONFIG_MMC_LOONGSON2=m
 CONFIG_INFINIBAND=m
+CONFIG_EDAC=y
+CONFIG_EDAC_LOONGSON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_EFI=y
 CONFIG_RTC_DRV_LOONGSON=y
@@ -898,19 +975,22 @@ CONFIG_NTB_SWITCHTEC=m
 CONFIG_NTB_PERF=m
 CONFIG_NTB_TRANSPORT=m
 CONFIG_PWM=y
+CONFIG_PWM_LOONGSON=y
 CONFIG_GENERIC_PHY=y
 CONFIG_USB4=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
 CONFIG_XFS_FS=y
+CONFIG_XFS_SUPPORT_V4=y
+CONFIG_XFS_SUPPORT_ASCII_CI=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_GFS2_FS=m
@@ -978,7 +1058,6 @@ CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
 CONFIG_PSTORE=m
 CONFIG_PSTORE_COMPRESS=y
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_EROFS_FS_ZIP_LZMA=y
@@ -1003,9 +1082,12 @@ CONFIG_CEPH_FS_SECURITY_LABEL=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_DEBUG is not set
 CONFIG_9P_FS=y
+CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
 CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_DLM=m
 CONFIG_KEY_DH_OPERATIONS=y
@@ -1016,7 +1098,7 @@ CONFIG_SECURITY_APPARMOR=y
 CONFIG_SECURITY_YAMA=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_CRYPTO_USER=m
-# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_SELFTESTS=y
 CONFIG_CRYPTO_PCRYPT=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -1026,10 +1108,11 @@ CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_SM4_GENERIC=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_SM3_GENERIC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
@@ -1040,8 +1123,8 @@ CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
-CONFIG_CRYPTO_CRC32_LOONGARCH=m
 CONFIG_CRYPTO_DEV_VIRTIO=m
+CONFIG_CRYPTO_DEV_LOONGSON_RNG=m
 CONFIG_DMA_CMA=y
 CONFIG_DMA_NUMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=0
diff --git a/arch/loongarch/crypto/Kconfig b/arch/loongarch/crypto/Kconfig
index 200a6e8b43b1..a0270b3e5b30 100644
--- a/arch/loongarch/crypto/Kconfig
+++ b/arch/loongarch/crypto/Kconfig
@@ -2,13 +2,4 @@
 
 menu "Accelerated Cryptographic Algorithms for CPU (loongarch)"
 
-config CRYPTO_CRC32_LOONGARCH
-	tristate "CRC32c and CRC32"
-	select CRC32
-	select CRYPTO_HASH
-	help
-	  CRC32c and CRC32 CRC algorithms
-
-	  Architecture: LoongArch with CRC32 instructions
-
 endmenu
diff --git a/arch/loongarch/crypto/Makefile b/arch/loongarch/crypto/Makefile
index d22613d27ce9..ba83755dde2b 100644
--- a/arch/loongarch/crypto/Makefile
+++ b/arch/loongarch/crypto/Makefile
@@ -2,5 +2,3 @@
 #
 # Makefile for LoongArch crypto files..
 #
-
-obj-$(CONFIG_CRYPTO_CRC32_LOONGARCH) += crc32-loongarch.o
diff --git a/arch/loongarch/crypto/crc32-loongarch.c b/arch/loongarch/crypto/crc32-loongarch.c
deleted file mode 100644
index b7d9782827f5..000000000000
--- a/arch/loongarch/crypto/crc32-loongarch.c
+++ /dev/null
@@ -1,300 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * crc32.c - CRC32 and CRC32C using LoongArch crc* instructions
- *
- * Module based on mips/crypto/crc32-mips.c
- *
- * Copyright (C) 2014 Linaro Ltd <yazen.ghannam@linaro.org>
- * Copyright (C) 2018 MIPS Tech, LLC
- * Copyright (C) 2020-2023 Loongson Technology Corporation Limited
- */
-
-#include <linux/module.h>
-#include <crypto/internal/hash.h>
-
-#include <asm/cpu-features.h>
-#include <linux/unaligned.h>
-
-#define _CRC32(crc, value, size, type)			\
-do {							\
-	__asm__ __volatile__(				\
-		#type ".w." #size ".w" " %0, %1, %0\n\t"\
-		: "+r" (crc)				\
-		: "r" (value)				\
-		: "memory");				\
-} while (0)
-
-#define CRC32(crc, value, size)		_CRC32(crc, value, size, crc)
-#define CRC32C(crc, value, size)	_CRC32(crc, value, size, crcc)
-
-static u32 crc32_loongarch_hw(u32 crc_, const u8 *p, unsigned int len)
-{
-	u32 crc = crc_;
-
-	while (len >= sizeof(u64)) {
-		u64 value = get_unaligned_le64(p);
-
-		CRC32(crc, value, d);
-		p += sizeof(u64);
-		len -= sizeof(u64);
-	}
-
-	if (len & sizeof(u32)) {
-		u32 value = get_unaligned_le32(p);
-
-		CRC32(crc, value, w);
-		p += sizeof(u32);
-	}
-
-	if (len & sizeof(u16)) {
-		u16 value = get_unaligned_le16(p);
-
-		CRC32(crc, value, h);
-		p += sizeof(u16);
-	}
-
-	if (len & sizeof(u8)) {
-		u8 value = *p++;
-
-		CRC32(crc, value, b);
-	}
-
-	return crc;
-}
-
-static u32 crc32c_loongarch_hw(u32 crc_, const u8 *p, unsigned int len)
-{
-	u32 crc = crc_;
-
-	while (len >= sizeof(u64)) {
-		u64 value = get_unaligned_le64(p);
-
-		CRC32C(crc, value, d);
-		p += sizeof(u64);
-		len -= sizeof(u64);
-	}
-
-	if (len & sizeof(u32)) {
-		u32 value = get_unaligned_le32(p);
-
-		CRC32C(crc, value, w);
-		p += sizeof(u32);
-	}
-
-	if (len & sizeof(u16)) {
-		u16 value = get_unaligned_le16(p);
-
-		CRC32C(crc, value, h);
-		p += sizeof(u16);
-	}
-
-	if (len & sizeof(u8)) {
-		u8 value = *p++;
-
-		CRC32C(crc, value, b);
-	}
-
-	return crc;
-}
-
-#define CHKSUM_BLOCK_SIZE	1
-#define CHKSUM_DIGEST_SIZE	4
-
-struct chksum_ctx {
-	u32 key;
-};
-
-struct chksum_desc_ctx {
-	u32 crc;
-};
-
-static int chksum_init(struct shash_desc *desc)
-{
-	struct chksum_ctx *mctx = crypto_shash_ctx(desc->tfm);
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	ctx->crc = mctx->key;
-
-	return 0;
-}
-
-/*
- * Setting the seed allows arbitrary accumulators and flexible XOR policy
- * If your algorithm starts with ~0, then XOR with ~0 before you set the seed.
- */
-static int chksum_setkey(struct crypto_shash *tfm, const u8 *key, unsigned int keylen)
-{
-	struct chksum_ctx *mctx = crypto_shash_ctx(tfm);
-
-	if (keylen != sizeof(mctx->key))
-		return -EINVAL;
-
-	mctx->key = get_unaligned_le32(key);
-
-	return 0;
-}
-
-static int chksum_update(struct shash_desc *desc, const u8 *data, unsigned int length)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	ctx->crc = crc32_loongarch_hw(ctx->crc, data, length);
-	return 0;
-}
-
-static int chksumc_update(struct shash_desc *desc, const u8 *data, unsigned int length)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	ctx->crc = crc32c_loongarch_hw(ctx->crc, data, length);
-	return 0;
-}
-
-static int chksum_final(struct shash_desc *desc, u8 *out)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	put_unaligned_le32(ctx->crc, out);
-	return 0;
-}
-
-static int chksumc_final(struct shash_desc *desc, u8 *out)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	put_unaligned_le32(~ctx->crc, out);
-	return 0;
-}
-
-static int __chksum_finup(u32 crc, const u8 *data, unsigned int len, u8 *out)
-{
-	put_unaligned_le32(crc32_loongarch_hw(crc, data, len), out);
-	return 0;
-}
-
-static int __chksumc_finup(u32 crc, const u8 *data, unsigned int len, u8 *out)
-{
-	put_unaligned_le32(~crc32c_loongarch_hw(crc, data, len), out);
-	return 0;
-}
-
-static int chksum_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	return __chksum_finup(ctx->crc, data, len, out);
-}
-
-static int chksumc_finup(struct shash_desc *desc, const u8 *data, unsigned int len, u8 *out)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	return __chksumc_finup(ctx->crc, data, len, out);
-}
-
-static int chksum_digest(struct shash_desc *desc, const u8 *data, unsigned int length, u8 *out)
-{
-	struct chksum_ctx *mctx = crypto_shash_ctx(desc->tfm);
-
-	return __chksum_finup(mctx->key, data, length, out);
-}
-
-static int chksumc_digest(struct shash_desc *desc, const u8 *data, unsigned int length, u8 *out)
-{
-	struct chksum_ctx *mctx = crypto_shash_ctx(desc->tfm);
-
-	return __chksumc_finup(mctx->key, data, length, out);
-}
-
-static int chksum_cra_init(struct crypto_tfm *tfm)
-{
-	struct chksum_ctx *mctx = crypto_tfm_ctx(tfm);
-
-	mctx->key = 0;
-	return 0;
-}
-
-static int chksumc_cra_init(struct crypto_tfm *tfm)
-{
-	struct chksum_ctx *mctx = crypto_tfm_ctx(tfm);
-
-	mctx->key = ~0;
-	return 0;
-}
-
-static struct shash_alg crc32_alg = {
-	.digestsize		=	CHKSUM_DIGEST_SIZE,
-	.setkey			=	chksum_setkey,
-	.init			=	chksum_init,
-	.update			=	chksum_update,
-	.final			=	chksum_final,
-	.finup			=	chksum_finup,
-	.digest			=	chksum_digest,
-	.descsize		=	sizeof(struct chksum_desc_ctx),
-	.base			=	{
-		.cra_name		=	"crc32",
-		.cra_driver_name	=	"crc32-loongarch",
-		.cra_priority		=	300,
-		.cra_flags		=	CRYPTO_ALG_OPTIONAL_KEY,
-		.cra_blocksize		=	CHKSUM_BLOCK_SIZE,
-		.cra_ctxsize		=	sizeof(struct chksum_ctx),
-		.cra_module		=	THIS_MODULE,
-		.cra_init		=	chksum_cra_init,
-	}
-};
-
-static struct shash_alg crc32c_alg = {
-	.digestsize		=	CHKSUM_DIGEST_SIZE,
-	.setkey			=	chksum_setkey,
-	.init			=	chksum_init,
-	.update			=	chksumc_update,
-	.final			=	chksumc_final,
-	.finup			=	chksumc_finup,
-	.digest			=	chksumc_digest,
-	.descsize		=	sizeof(struct chksum_desc_ctx),
-	.base			=	{
-		.cra_name		=	"crc32c",
-		.cra_driver_name	=	"crc32c-loongarch",
-		.cra_priority		=	300,
-		.cra_flags		=	CRYPTO_ALG_OPTIONAL_KEY,
-		.cra_blocksize		=	CHKSUM_BLOCK_SIZE,
-		.cra_ctxsize		=	sizeof(struct chksum_ctx),
-		.cra_module		=	THIS_MODULE,
-		.cra_init		=	chksumc_cra_init,
-	}
-};
-
-static int __init crc32_mod_init(void)
-{
-	int err;
-
-	if (!cpu_has(CPU_FEATURE_CRC32))
-		return 0;
-
-	err = crypto_register_shash(&crc32_alg);
-	if (err)
-		return err;
-
-	err = crypto_register_shash(&crc32c_alg);
-	if (err)
-		return err;
-
-	return 0;
-}
-
-static void __exit crc32_mod_exit(void)
-{
-	if (!cpu_has(CPU_FEATURE_CRC32))
-		return;
-
-	crypto_unregister_shash(&crc32_alg);
-	crypto_unregister_shash(&crc32c_alg);
-}
-
-module_init(crc32_mod_init);
-module_exit(crc32_mod_exit);
-
-MODULE_AUTHOR("Min Zhou <zhoumin@loongson.cn>");
-MODULE_AUTHOR("Huacai Chen <chenhuacai@loongson.cn>");
-MODULE_DESCRIPTION("CRC32 and CRC32C using LoongArch crc* instructions");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/loongarch/include/asm/Kbuild b/arch/loongarch/include/asm/Kbuild
index 80ddb5edb845..b04d2cef935f 100644
--- a/arch/loongarch/include/asm/Kbuild
+++ b/arch/loongarch/include/asm/Kbuild
@@ -10,5 +10,4 @@ generic-y += user.h
 generic-y += ioctl.h
 generic-y += mmzone.h
 generic-y += statfs.h
-generic-y += param.h
 generic-y += text-patching.h
diff --git a/arch/loongarch/include/asm/acenv.h b/arch/loongarch/include/asm/acenv.h
index 52f298f7293b..483c955f2ae5 100644
--- a/arch/loongarch/include/asm/acenv.h
+++ b/arch/loongarch/include/asm/acenv.h
@@ -10,9 +10,8 @@
 #ifndef _ASM_LOONGARCH_ACENV_H
 #define _ASM_LOONGARCH_ACENV_H
 
-/*
- * This header is required by ACPI core, but we have nothing to fill in
- * right now. Will be updated later when needed.
- */
+#ifdef CONFIG_ARCH_STRICT_ALIGN
+#define ACPI_MISALIGNMENT_NOT_SUPPORTED
+#endif /* CONFIG_ARCH_STRICT_ALIGN */
 
 #endif /* _ASM_LOONGARCH_ACENV_H */
diff --git a/arch/loongarch/include/asm/acpi.h b/arch/loongarch/include/asm/acpi.h
index 313f66f7913a..7376840fa9f7 100644
--- a/arch/loongarch/include/asm/acpi.h
+++ b/arch/loongarch/include/asm/acpi.h
@@ -33,7 +33,7 @@ static inline bool acpi_has_cpu_in_madt(void)
 	return true;
 }
 
-#define MAX_CORE_PIC 256
+#define MAX_CORE_PIC 2048
 
 extern struct list_head acpi_wakeup_device_list;
 extern struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
diff --git a/arch/loongarch/include/asm/addrspace.h b/arch/loongarch/include/asm/addrspace.h
index fe198b473f84..e739dbc6329d 100644
--- a/arch/loongarch/include/asm/addrspace.h
+++ b/arch/loongarch/include/asm/addrspace.h
@@ -18,12 +18,12 @@
 /*
  * This gives the physical RAM offset.
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifndef PHYS_OFFSET
 #define PHYS_OFFSET	_UL(0)
 #endif
 extern unsigned long vm_map_base;
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #ifndef IO_BASE
 #define IO_BASE			CSR_DMW0_BASE
@@ -66,7 +66,7 @@ extern unsigned long vm_map_base;
 #define FIXADDR_TOP		((unsigned long)(long)(int)0xfffe0000)
 #endif
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define _ATYPE_
 #define _ATYPE32_
 #define _ATYPE64_
@@ -85,7 +85,7 @@ extern unsigned long vm_map_base;
 /*
  *  32/64-bit LoongArch address spaces
  */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define _ACAST32_
 #define _ACAST64_
 #else
diff --git a/arch/loongarch/include/asm/alternative-asm.h b/arch/loongarch/include/asm/alternative-asm.h
index ff3d10ac393f..7dc29bd9b2f0 100644
--- a/arch/loongarch/include/asm/alternative-asm.h
+++ b/arch/loongarch/include/asm/alternative-asm.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_ALTERNATIVE_ASM_H
 #define _ASM_ALTERNATIVE_ASM_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #include <asm/asm.h>
 
@@ -77,6 +77,6 @@
 	.previous
 .endm
 
-#endif  /*  __ASSEMBLY__  */
+#endif  /*  __ASSEMBLER__  */
 
 #endif /* _ASM_ALTERNATIVE_ASM_H */
diff --git a/arch/loongarch/include/asm/alternative.h b/arch/loongarch/include/asm/alternative.h
index cee7b29785ab..b5bae21fb3c8 100644
--- a/arch/loongarch/include/asm/alternative.h
+++ b/arch/loongarch/include/asm/alternative.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_ALTERNATIVE_H
 #define _ASM_ALTERNATIVE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/stddef.h>
@@ -106,6 +106,6 @@ extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
 #define alternative_2(oldinstr, newinstr1, feature1, newinstr2, feature2) \
 	(asm volatile(ALTERNATIVE_2(oldinstr, newinstr1, feature1, newinstr2, feature2) ::: "memory"))
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_ALTERNATIVE_H */
diff --git a/arch/loongarch/include/asm/asm-extable.h b/arch/loongarch/include/asm/asm-extable.h
index df05005f2b80..d60bdf2e6377 100644
--- a/arch/loongarch/include/asm/asm-extable.h
+++ b/arch/loongarch/include/asm/asm-extable.h
@@ -7,7 +7,7 @@
 #define EX_TYPE_UACCESS_ERR_ZERO	2
 #define EX_TYPE_BPF			3
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define __ASM_EXTABLE_RAW(insn, fixup, type, data)	\
 	.pushsection	__ex_table, "a";		\
@@ -22,7 +22,7 @@
 	__ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_FIXUP, 0)
 	.endm
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 #include <linux/bits.h>
 #include <linux/stringify.h>
@@ -60,6 +60,6 @@
 #define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err)			\
 	_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_ASM_EXTABLE_H */
diff --git a/arch/loongarch/include/asm/asm-prototypes.h b/arch/loongarch/include/asm/asm-prototypes.h
index 51f224bcfc65..704066b4f736 100644
--- a/arch/loongarch/include/asm/asm-prototypes.h
+++ b/arch/loongarch/include/asm/asm-prototypes.h
@@ -12,3 +12,11 @@ __int128_t __ashlti3(__int128_t a, int b);
 __int128_t __ashrti3(__int128_t a, int b);
 __int128_t __lshrti3(__int128_t a, int b);
 #endif
+
+asmlinkage void noinstr __no_stack_protector ret_from_fork(struct task_struct *prev,
+							   struct pt_regs *regs);
+
+asmlinkage void noinstr __no_stack_protector ret_from_kernel_thread(struct task_struct *prev,
+								    struct pt_regs *regs,
+								    int (*fn)(void *),
+								    void *fn_arg);
diff --git a/arch/loongarch/include/asm/asm.h b/arch/loongarch/include/asm/asm.h
index f591b3245def..f018d26fc995 100644
--- a/arch/loongarch/include/asm/asm.h
+++ b/arch/loongarch/include/asm/asm.h
@@ -110,7 +110,7 @@
 #define LONG_SRA	srai.w
 #define LONG_SRAV	sra.w
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define LONG		.word
 #endif
 #define LONGSIZE	4
@@ -131,7 +131,7 @@
 #define LONG_SRA	srai.d
 #define LONG_SRAV	sra.d
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define LONG		.dword
 #endif
 #define LONGSIZE	8
@@ -158,7 +158,7 @@
 
 #define PTR_SCALESHIFT	2
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define PTR		.word
 #endif
 #define PTRSIZE		4
@@ -181,7 +181,7 @@
 
 #define PTR_SCALESHIFT	3
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define PTR		.dword
 #endif
 #define PTRSIZE		8
diff --git a/arch/loongarch/include/asm/bug.h b/arch/loongarch/include/asm/bug.h
index 08388876ade4..d090a5bec5eb 100644
--- a/arch/loongarch/include/asm/bug.h
+++ b/arch/loongarch/include/asm/bug.h
@@ -4,13 +4,14 @@
 
 #include <asm/break.h>
 #include <linux/stringify.h>
+#include <linux/objtool.h>
 
 #ifndef CONFIG_DEBUG_BUGVERBOSE
 #define _BUGVERBOSE_LOCATION(file, line)
 #else
 #define __BUGVERBOSE_LOCATION(file, line)			\
 		.pushsection .rodata.str, "aMS", @progbits, 1;	\
-	10002:	.string file;					\
+	10002:	.ascii file "\0";				\
 		.popsection;					\
 								\
 		.long 10002b - .;				\
@@ -19,39 +20,38 @@
 #endif
 
 #ifndef CONFIG_GENERIC_BUG
-#define __BUG_ENTRY(flags)
+#define __BUG_ENTRY(cond_str, flags)
 #else
-#define __BUG_ENTRY(flags) 					\
+#define __BUG_ENTRY(cond_str, flags)				\
 		.pushsection __bug_table, "aw";			\
 		.align 2;					\
 	10000:	.long 10001f - .;				\
-		_BUGVERBOSE_LOCATION(__FILE__, __LINE__)	\
-		.short flags; 					\
+		_BUGVERBOSE_LOCATION(WARN_CONDITION_STR(cond_str) __FILE__, __LINE__) \
+		.short flags;					\
 		.popsection;					\
 	10001:
 #endif
 
-#define ASM_BUG_FLAGS(flags)					\
-	__BUG_ENTRY(flags)					\
-	break		BRK_BUG
+#define ASM_BUG_FLAGS(cond_str, flags)				\
+	__BUG_ENTRY(cond_str, flags)				\
+	break		BRK_BUG;
 
-#define ASM_BUG()	ASM_BUG_FLAGS(0)
+#define ASM_BUG()	ASM_BUG_FLAGS("", 0)
 
-#define __BUG_FLAGS(flags)					\
-	asm_inline volatile (__stringify(ASM_BUG_FLAGS(flags)));
+#define __BUG_FLAGS(cond_str, flags, extra)			\
+	asm_inline volatile (__stringify(ASM_BUG_FLAGS(cond_str, flags)) extra);
 
-#define __WARN_FLAGS(flags)					\
+#define __WARN_FLAGS(cond_str, flags)				\
 do {								\
 	instrumentation_begin();				\
-	__BUG_FLAGS(BUGFLAG_WARNING|(flags));			\
-	annotate_reachable();					\
+	__BUG_FLAGS(cond_str, BUGFLAG_WARNING|(flags), ANNOTATE_REACHABLE(10001b));\
 	instrumentation_end();					\
 } while (0)
 
 #define BUG()							\
 do {								\
 	instrumentation_begin();				\
-	__BUG_FLAGS(0);						\
+	__BUG_FLAGS("", 0, "");					\
 	unreachable();						\
 } while (0)
 
diff --git a/arch/loongarch/include/asm/cache.h b/arch/loongarch/include/asm/cache.h
index 1b6d09617199..aa622c754414 100644
--- a/arch/loongarch/include/asm/cache.h
+++ b/arch/loongarch/include/asm/cache.h
@@ -8,6 +8,8 @@
 #define L1_CACHE_SHIFT		CONFIG_L1_CACHE_SHIFT
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
+#define ARCH_DMA_MINALIGN	(16)
+
 #define __read_mostly __section(".data..read_mostly")
 
 #endif /* _ASM_CACHE_H */
diff --git a/arch/loongarch/include/asm/cpu-features.h b/arch/loongarch/include/asm/cpu-features.h
index fc83bb32f9f0..bd5f0457ad21 100644
--- a/arch/loongarch/include/asm/cpu-features.h
+++ b/arch/loongarch/include/asm/cpu-features.h
@@ -67,6 +67,8 @@
 #define cpu_has_hypervisor	cpu_opt(LOONGARCH_CPU_HYPERVISOR)
 #define cpu_has_ptw		cpu_opt(LOONGARCH_CPU_PTW)
 #define cpu_has_lspw		cpu_opt(LOONGARCH_CPU_LSPW)
+#define cpu_has_msgint		cpu_opt(LOONGARCH_CPU_MSGINT)
 #define cpu_has_avecint		cpu_opt(LOONGARCH_CPU_AVECINT)
+#define cpu_has_redirectint	cpu_opt(LOONGARCH_CPU_REDIRECTINT)
 
 #endif /* __ASM_CPU_FEATURES_H */
diff --git a/arch/loongarch/include/asm/cpu-info.h b/arch/loongarch/include/asm/cpu-info.h
index 900589cb159d..7f5bc0ad9d50 100644
--- a/arch/loongarch/include/asm/cpu-info.h
+++ b/arch/loongarch/include/asm/cpu-info.h
@@ -57,6 +57,7 @@ struct cpuinfo_loongarch {
 	int			global_id; /* physical global thread number */
 	int			vabits; /* Virtual Address size in bits */
 	int			pabits; /* Physical Address size in bits */
+	int			timerbits; /* Width of arch timer in bits */
 	unsigned int		ksave_mask; /* Usable KSave mask. */
 	unsigned int		watch_dreg_count;   /* Number data breakpoints */
 	unsigned int		watch_ireg_count;   /* Number instruction breakpoints */
@@ -75,27 +76,6 @@ extern const char *__cpu_full_name[];
 #define cpu_family_string()	__cpu_family[raw_smp_processor_id()]
 #define cpu_full_name_string()	__cpu_full_name[raw_smp_processor_id()]
 
-struct seq_file;
-struct notifier_block;
-
-extern int register_proc_cpuinfo_notifier(struct notifier_block *nb);
-extern int proc_cpuinfo_notifier_call_chain(unsigned long val, void *v);
-
-#define proc_cpuinfo_notifier(fn, pri)					\
-({									\
-	static struct notifier_block fn##_nb = {			\
-		.notifier_call = fn,					\
-		.priority = pri						\
-	};								\
-									\
-	register_proc_cpuinfo_notifier(&fn##_nb);			\
-})
-
-struct proc_cpuinfo_notifier_args {
-	struct seq_file *m;
-	unsigned long n;
-};
-
 static inline bool cpus_are_siblings(int cpua, int cpub)
 {
 	struct cpuinfo_loongarch *infoa = &cpu_data[cpua];
diff --git a/arch/loongarch/include/asm/cpu.h b/arch/loongarch/include/asm/cpu.h
index 98cf4d7b4b0a..f3efb00b6141 100644
--- a/arch/loongarch/include/asm/cpu.h
+++ b/arch/loongarch/include/asm/cpu.h
@@ -46,7 +46,7 @@
 
 #define PRID_PRODUCT_MASK	0x0fff
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 
 enum cpu_type_enum {
 	CPU_UNKNOWN,
@@ -55,7 +55,28 @@ enum cpu_type_enum {
 	CPU_LAST
 };
 
-#endif /* !__ASSEMBLY */
+static inline char *id_to_core_name(unsigned int id)
+{
+	if ((id & PRID_COMP_MASK) != PRID_COMP_LOONGSON)
+		return "Unknown";
+
+	switch (id & PRID_SERIES_MASK) {
+	case PRID_SERIES_LA132:
+		return "LA132";
+	case PRID_SERIES_LA264:
+		return "LA264";
+	case PRID_SERIES_LA364:
+		return "LA364";
+	case PRID_SERIES_LA464:
+		return "LA464";
+	case PRID_SERIES_LA664:
+		return "LA664";
+	default:
+		return "Unknown";
+	}
+}
+
+#endif /* !__ASSEMBLER__ */
 
 /*
  * ISA Level encodings
@@ -101,7 +122,9 @@ enum cpu_type_enum {
 #define CPU_FEATURE_HYPERVISOR		26	/* CPU has hypervisor (running in VM) */
 #define CPU_FEATURE_PTW			27	/* CPU has hardware page table walker */
 #define CPU_FEATURE_LSPW		28	/* CPU has LSPW (lddir/ldpte instructions) */
-#define CPU_FEATURE_AVECINT		29	/* CPU has AVEC interrupt */
+#define CPU_FEATURE_MSGINT		29	/* CPU has MSG interrupt */
+#define CPU_FEATURE_AVECINT		30	/* CPU has AVEC interrupt */
+#define CPU_FEATURE_REDIRECTINT		31	/* CPU has interrupt remapping */
 
 #define LOONGARCH_CPU_CPUCFG		BIT_ULL(CPU_FEATURE_CPUCFG)
 #define LOONGARCH_CPU_LAM		BIT_ULL(CPU_FEATURE_LAM)
@@ -132,6 +155,8 @@ enum cpu_type_enum {
 #define LOONGARCH_CPU_HYPERVISOR	BIT_ULL(CPU_FEATURE_HYPERVISOR)
 #define LOONGARCH_CPU_PTW		BIT_ULL(CPU_FEATURE_PTW)
 #define LOONGARCH_CPU_LSPW		BIT_ULL(CPU_FEATURE_LSPW)
+#define LOONGARCH_CPU_MSGINT		BIT_ULL(CPU_FEATURE_MSGINT)
 #define LOONGARCH_CPU_AVECINT		BIT_ULL(CPU_FEATURE_AVECINT)
+#define LOONGARCH_CPU_REDIRECTINT	BIT_ULL(CPU_FEATURE_REDIRECTINT)
 
 #endif /* _ASM_CPU_H */
diff --git a/arch/loongarch/include/asm/entry-common.h b/arch/loongarch/include/asm/entry-common.h
index 0fe2a098ded9..099132980dc9 100644
--- a/arch/loongarch/include/asm/entry-common.h
+++ b/arch/loongarch/include/asm/entry-common.h
@@ -2,12 +2,6 @@
 #ifndef ARCH_LOONGARCH_ENTRY_COMMON_H
 #define ARCH_LOONGARCH_ENTRY_COMMON_H
 
-#include <linux/sched.h>
-#include <linux/processor.h>
-
-static inline bool on_thread_stack(void)
-{
-	return !(((unsigned long)(current->stack) ^ current_stack_pointer) & ~(THREAD_SIZE - 1));
-}
+#include <asm/stacktrace.h> /* For on_thread_stack() */
 
 #endif
diff --git a/arch/loongarch/include/asm/fprobe.h b/arch/loongarch/include/asm/fprobe.h
new file mode 100644
index 000000000000..7af3b3126caf
--- /dev/null
+++ b/arch/loongarch/include/asm/fprobe.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_LOONGARCH_FPROBE_H
+#define _ASM_LOONGARCH_FPROBE_H
+
+/*
+ * Explicitly undef ARCH_DEFINE_ENCODE_FPROBE_HEADER, because loongarch does not
+ * have enough number of fixed MSBs of the address of kernel objects for
+ * encoding the size of data in fprobe_header. Use 2-entries encoding instead.
+ */
+#undef ARCH_DEFINE_ENCODE_FPROBE_HEADER
+
+#endif /* _ASM_LOONGARCH_FPROBE_H */
diff --git a/arch/loongarch/include/asm/fpu.h b/arch/loongarch/include/asm/fpu.h
index 3177674228f8..45514f314664 100644
--- a/arch/loongarch/include/asm/fpu.h
+++ b/arch/loongarch/include/asm/fpu.h
@@ -22,22 +22,29 @@
 struct sigcontext;
 
 #define kernel_fpu_available() cpu_has_fpu
-extern void kernel_fpu_begin(void);
-extern void kernel_fpu_end(void);
-
-extern void _init_fpu(unsigned int);
-extern void _save_fp(struct loongarch_fpu *);
-extern void _restore_fp(struct loongarch_fpu *);
-
-extern void _save_lsx(struct loongarch_fpu *fpu);
-extern void _restore_lsx(struct loongarch_fpu *fpu);
-extern void _init_lsx_upper(void);
-extern void _restore_lsx_upper(struct loongarch_fpu *fpu);
-
-extern void _save_lasx(struct loongarch_fpu *fpu);
-extern void _restore_lasx(struct loongarch_fpu *fpu);
-extern void _init_lasx_upper(void);
-extern void _restore_lasx_upper(struct loongarch_fpu *fpu);
+
+void kernel_fpu_begin(void);
+void kernel_fpu_end(void);
+
+asmlinkage void _init_fpu(unsigned int);
+asmlinkage void _save_fp(struct loongarch_fpu *);
+asmlinkage void _restore_fp(struct loongarch_fpu *);
+asmlinkage int _save_fp_context(void __user *fpregs, void __user *fcc, void __user *csr);
+asmlinkage int _restore_fp_context(void __user *fpregs, void __user *fcc, void __user *csr);
+
+asmlinkage void _save_lsx(struct loongarch_fpu *fpu);
+asmlinkage void _restore_lsx(struct loongarch_fpu *fpu);
+asmlinkage void _init_lsx_upper(void);
+asmlinkage void _restore_lsx_upper(struct loongarch_fpu *fpu);
+asmlinkage int _save_lsx_context(void __user *fpregs, void __user *fcc, void __user *fcsr);
+asmlinkage int _restore_lsx_context(void __user *fpregs, void __user *fcc, void __user *fcsr);
+
+asmlinkage void _save_lasx(struct loongarch_fpu *fpu);
+asmlinkage void _restore_lasx(struct loongarch_fpu *fpu);
+asmlinkage void _init_lasx_upper(void);
+asmlinkage void _restore_lasx_upper(struct loongarch_fpu *fpu);
+asmlinkage int _save_lasx_context(void __user *fpregs, void __user *fcc, void __user *fcsr);
+asmlinkage int _restore_lasx_context(void __user *fpregs, void __user *fcc, void __user *fcsr);
 
 static inline void enable_lsx(void);
 static inline void disable_lsx(void);
diff --git a/arch/loongarch/include/asm/ftrace.h b/arch/loongarch/include/asm/ftrace.h
index 8f13eaeaa325..f4caaf764f9e 100644
--- a/arch/loongarch/include/asm/ftrace.h
+++ b/arch/loongarch/include/asm/ftrace.h
@@ -14,7 +14,7 @@
 
 #define MCOUNT_INSN_SIZE 4		/* sizeof mcount call */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifndef CONFIG_DYNAMIC_FTRACE
 
@@ -57,6 +57,16 @@ ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs, unsigned long ip)
 	instruction_pointer_set(&arch_ftrace_regs(fregs)->regs, ip);
 }
 
+#undef ftrace_regs_get_frame_pointer
+#define ftrace_regs_get_frame_pointer(fregs) \
+	(arch_ftrace_regs(fregs)->regs.regs[22])
+
+static __always_inline unsigned long
+ftrace_regs_get_return_address(struct ftrace_regs *fregs)
+{
+	return *(unsigned long *)(arch_ftrace_regs(fregs)->regs.regs[1]);
+}
+
 #define ftrace_graph_func ftrace_graph_func
 void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
 		       struct ftrace_ops *op, struct ftrace_regs *fregs);
@@ -74,30 +84,8 @@ __arch_ftrace_set_direct_caller(struct pt_regs *regs, unsigned long addr)
 
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* CONFIG_FUNCTION_TRACER */
 
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-struct fgraph_ret_regs {
-	/* a0 - a1 */
-	unsigned long regs[2];
-
-	unsigned long fp;
-	unsigned long __unused;
-};
-
-static inline unsigned long fgraph_ret_regs_return_value(struct fgraph_ret_regs *ret_regs)
-{
-	return ret_regs->regs[0];
-}
-
-static inline unsigned long fgraph_ret_regs_frame_pointer(struct fgraph_ret_regs *ret_regs)
-{
-	return ret_regs->fp;
-}
-#endif /* ifdef CONFIG_FUNCTION_GRAPH_TRACER */
-#endif
-
 #endif /* _ASM_LOONGARCH_FTRACE_H */
diff --git a/arch/loongarch/include/asm/gpr-num.h b/arch/loongarch/include/asm/gpr-num.h
index 996038da806d..af95b941f48b 100644
--- a/arch/loongarch/include/asm/gpr-num.h
+++ b/arch/loongarch/include/asm/gpr-num.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_GPR_NUM_H
 #define __ASM_GPR_NUM_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 	.equ	.L__gpr_num_zero, 0
 	.irp	num,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
@@ -25,7 +25,7 @@
 	.equ	.L__gpr_num_$s\num, 23 + \num
 	.endr
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 #define __DEFINE_ASM_GPR_NUMS					\
 "	.equ	.L__gpr_num_zero, 0\n"				\
@@ -47,6 +47,6 @@
 "	.equ	.L__gpr_num_$s\\num, 23 + \\num\n"		\
 "	.endr\n"						\
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_GPR_NUM_H */
diff --git a/arch/loongarch/include/asm/hugetlb.h b/arch/loongarch/include/asm/hugetlb.h
index b837c65a4894..ab68b594f889 100644
--- a/arch/loongarch/include/asm/hugetlb.h
+++ b/arch/loongarch/include/asm/hugetlb.h
@@ -10,23 +10,20 @@
 
 uint64_t pmd_to_entrylo(unsigned long pmd_val);
 
-#define __HAVE_ARCH_PREPARE_HUGEPAGE_RANGE
-static inline int prepare_hugepage_range(struct file *file,
-					 unsigned long addr,
-					 unsigned long len)
+#define __HAVE_ARCH_HUGE_PTE_CLEAR
+static inline void huge_pte_clear(struct mm_struct *mm, unsigned long addr,
+				  pte_t *ptep, unsigned long sz)
 {
-	unsigned long task_size = STACK_TOP;
+	pte_t clear;
 
-	if (len > task_size)
-		return -ENOMEM;
-	if (task_size - len < addr)
-		return -EINVAL;
-	return 0;
+	pte_val(clear) = (unsigned long)invalid_pte_table;
+	set_pte_at(mm, addr, ptep, clear);
 }
 
 #define __HAVE_ARCH_HUGE_PTEP_GET_AND_CLEAR
 static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-					    unsigned long addr, pte_t *ptep)
+					    unsigned long addr, pte_t *ptep,
+					    unsigned long sz)
 {
 	pte_t clear;
 	pte_t pte = ptep_get(ptep);
@@ -41,8 +38,9 @@ static inline pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
 					  unsigned long addr, pte_t *ptep)
 {
 	pte_t pte;
+	unsigned long sz = huge_page_size(hstate_vma(vma));
 
-	pte = huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+	pte = huge_ptep_get_and_clear(vma->vm_mm, addr, ptep, sz);
 	flush_tlb_page(vma, addr);
 	return pte;
 }
diff --git a/arch/loongarch/include/asm/hw_breakpoint.h b/arch/loongarch/include/asm/hw_breakpoint.h
index d78330916bd1..5faa97a87a9e 100644
--- a/arch/loongarch/include/asm/hw_breakpoint.h
+++ b/arch/loongarch/include/asm/hw_breakpoint.h
@@ -38,8 +38,8 @@ struct arch_hw_breakpoint {
  * Limits.
  * Changing these will require modifications to the register accessors.
  */
-#define LOONGARCH_MAX_BRP		8
-#define LOONGARCH_MAX_WRP		8
+#define LOONGARCH_MAX_BRP		14
+#define LOONGARCH_MAX_WRP		14
 
 /* Virtual debug register bases. */
 #define CSR_CFG_ADDR	0
@@ -134,13 +134,13 @@ static inline void hw_breakpoint_thread_switch(struct task_struct *next)
 /* Determine number of BRP registers available. */
 static inline int get_num_brps(void)
 {
-	return csr_read64(LOONGARCH_CSR_FWPC) & CSR_FWPC_NUM;
+	return csr_read32(LOONGARCH_CSR_FWPC) & CSR_FWPC_NUM;
 }
 
 /* Determine number of WRP registers available. */
 static inline int get_num_wrps(void)
 {
-	return csr_read64(LOONGARCH_CSR_MWPC) & CSR_MWPC_NUM;
+	return csr_read32(LOONGARCH_CSR_MWPC) & CSR_MWPC_NUM;
 }
 
 #endif	/* __KERNEL__ */
diff --git a/arch/loongarch/include/asm/image.h b/arch/loongarch/include/asm/image.h
new file mode 100644
index 000000000000..cab981cdb72a
--- /dev/null
+++ b/arch/loongarch/include/asm/image.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * LoongArch binary image header for EFI(PE/COFF) format.
+ *
+ * Author: Youling Tang <tangyouling@kylinos.cn>
+ * Copyright (C) 2025 KylinSoft Corporation.
+ */
+
+#ifndef __ASM_IMAGE_H
+#define __ASM_IMAGE_H
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct loongarch_image_header
+ *
+ * @dos_sig: Optional PE format 'MZ' signature.
+ * @padding_1: Reserved.
+ * @kernel_entry: Kernel image entry pointer.
+ * @kernel_asize: An estimated size of the memory image size in LSB byte order.
+ * @text_offset: The image load offset in LSB byte order.
+ * @padding_2: Reserved.
+ * @pe_header: Optional offset to a PE format header.
+ **/
+
+struct loongarch_image_header {
+	uint8_t dos_sig[2];
+	uint16_t padding_1[3];
+	uint64_t kernel_entry;
+	uint64_t kernel_asize;
+	uint64_t text_offset;
+	uint32_t padding_2[7];
+	uint32_t pe_header;
+};
+
+/*
+ * loongarch_header_check_dos_sig - Helper to check the header
+ *
+ * Returns true (non-zero) if 'MZ' signature is found.
+ */
+
+static inline int loongarch_header_check_dos_sig(const struct loongarch_image_header *h)
+{
+	if (!h)
+		return 0;
+
+	return (h->dos_sig[0] == 'M' && h->dos_sig[1] == 'Z');
+}
+
+#endif /* __ASSEMBLER__ */
+
+#endif /* __ASM_IMAGE_H */
diff --git a/arch/loongarch/include/asm/inst.h b/arch/loongarch/include/asm/inst.h
index 944482063f14..55e64a12a124 100644
--- a/arch/loongarch/include/asm/inst.h
+++ b/arch/loongarch/include/asm/inst.h
@@ -77,6 +77,10 @@ enum reg2_op {
 	iocsrwrh_op     = 0x19205,
 	iocsrwrw_op     = 0x19206,
 	iocsrwrd_op     = 0x19207,
+	llacqw_op	= 0xe15e0,
+	screlw_op	= 0xe15e1,
+	llacqd_op	= 0xe15e2,
+	screld_op	= 0xe15e3,
 };
 
 enum reg2i5_op {
@@ -189,6 +193,7 @@ enum reg3_op {
 	fldxd_op	= 0x7068,
 	fstxs_op	= 0x7070,
 	fstxd_op	= 0x7078,
+	scq_op		= 0x70ae,
 	amswapw_op	= 0x70c0,
 	amswapd_op	= 0x70c1,
 	amaddw_op	= 0x70c2,
@@ -497,6 +502,7 @@ void arch_simulate_insn(union loongarch_instruction insn, struct pt_regs *regs);
 int larch_insn_read(void *addr, u32 *insnp);
 int larch_insn_write(void *addr, u32 insn);
 int larch_insn_patch_text(void *addr, u32 insn);
+int larch_insn_text_copy(void *dst, void *src, size_t len);
 
 u32 larch_insn_gen_nop(void);
 u32 larch_insn_gen_b(unsigned long pc, unsigned long dest);
@@ -510,6 +516,8 @@ u32 larch_insn_gen_move(enum loongarch_gpr rd, enum loongarch_gpr rj);
 u32 larch_insn_gen_lu12iw(enum loongarch_gpr rd, int imm);
 u32 larch_insn_gen_lu32id(enum loongarch_gpr rd, int imm);
 u32 larch_insn_gen_lu52id(enum loongarch_gpr rd, enum loongarch_gpr rj, int imm);
+u32 larch_insn_gen_beq(enum loongarch_gpr rd, enum loongarch_gpr rj, int imm);
+u32 larch_insn_gen_bne(enum loongarch_gpr rd, enum loongarch_gpr rj, int imm);
 u32 larch_insn_gen_jirl(enum loongarch_gpr rd, enum loongarch_gpr rj, int imm);
 
 static inline bool signed_imm_check(long val, unsigned int bit)
@@ -683,7 +691,17 @@ DEF_EMIT_REG2I16_FORMAT(blt, blt_op)
 DEF_EMIT_REG2I16_FORMAT(bge, bge_op)
 DEF_EMIT_REG2I16_FORMAT(bltu, bltu_op)
 DEF_EMIT_REG2I16_FORMAT(bgeu, bgeu_op)
-DEF_EMIT_REG2I16_FORMAT(jirl, jirl_op)
+
+static inline void emit_jirl(union loongarch_instruction *insn,
+			     enum loongarch_gpr rd,
+			     enum loongarch_gpr rj,
+			     int offset)
+{
+	insn->reg2i16_format.opcode = jirl_op;
+	insn->reg2i16_format.immediate = offset;
+	insn->reg2i16_format.rd = rd;
+	insn->reg2i16_format.rj = rj;
+}
 
 #define DEF_EMIT_REG2BSTRD_FORMAT(NAME, OP)				\
 static inline void emit_##NAME(union loongarch_instruction *insn,	\
diff --git a/arch/loongarch/include/asm/io.h b/arch/loongarch/include/asm/io.h
index e77a56eaf906..0130185e0349 100644
--- a/arch/loongarch/include/asm/io.h
+++ b/arch/loongarch/include/asm/io.h
@@ -14,7 +14,7 @@
 #include <asm/pgtable-bits.h>
 #include <asm/string.h>
 
-extern void __init __iomem *early_ioremap(u64 phys_addr, unsigned long size);
+extern void __init __iomem *early_ioremap(phys_addr_t phys_addr, unsigned long size);
 extern void __init early_iounmap(void __iomem *addr, unsigned long size);
 
 #define early_memremap early_ioremap
@@ -23,9 +23,12 @@ extern void __init early_iounmap(void __iomem *addr, unsigned long size);
 #ifdef CONFIG_ARCH_IOREMAP
 
 static inline void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
-					 unsigned long prot_val)
+					 pgprot_t prot)
 {
-	switch (prot_val & _CACHE_MASK) {
+	if (offset > TO_PHYS_MASK)
+		return NULL;
+
+	switch (pgprot_val(prot) & _CACHE_MASK) {
 	case _CACHE_CC:
 		return (void __iomem *)(unsigned long)(CACHE_BASE + offset);
 	case _CACHE_SUC:
@@ -38,7 +41,7 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
 }
 
 #define ioremap(offset, size)		\
-	ioremap_prot((offset), (size), pgprot_val(PAGE_KERNEL_SUC))
+	ioremap_prot((offset), (size), PAGE_KERNEL_SUC)
 
 #define iounmap(addr) 			((void)(addr))
 
@@ -55,10 +58,10 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
  */
 #define ioremap_wc(offset, size)	\
 	ioremap_prot((offset), (size),	\
-		pgprot_val(wc_enabled ? PAGE_KERNEL_WUC : PAGE_KERNEL_SUC))
+		     wc_enabled ? PAGE_KERNEL_WUC : PAGE_KERNEL_SUC)
 
 #define ioremap_cache(offset, size)	\
-	ioremap_prot((offset), (size), pgprot_val(PAGE_KERNEL))
+	ioremap_prot((offset), (size), PAGE_KERNEL)
 
 #define mmiowb() wmb()
 
diff --git a/arch/loongarch/include/asm/irq.h b/arch/loongarch/include/asm/irq.h
index a0ca84da8541..12bd15578c33 100644
--- a/arch/loongarch/include/asm/irq.h
+++ b/arch/loongarch/include/asm/irq.h
@@ -53,7 +53,7 @@ void spurious_interrupt(void);
 #define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
 void arch_trigger_cpumask_backtrace(const struct cpumask *mask, int exclude_cpu);
 
-#define MAX_IO_PICS 2
+#define MAX_IO_PICS 8
 #define NR_IRQS	(64 + NR_VECTORS * (NR_CPUS + MAX_IO_PICS))
 
 struct acpi_vector_group {
diff --git a/arch/loongarch/include/asm/irqflags.h b/arch/loongarch/include/asm/irqflags.h
index 319a8c616f1f..620163628a7f 100644
--- a/arch/loongarch/include/asm/irqflags.h
+++ b/arch/loongarch/include/asm/irqflags.h
@@ -5,7 +5,7 @@
 #ifndef _ASM_IRQFLAGS_H
 #define _ASM_IRQFLAGS_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/compiler.h>
 #include <linux/stringify.h>
@@ -14,40 +14,48 @@
 static inline void arch_local_irq_enable(void)
 {
 	u32 flags = CSR_CRMD_IE;
+	register u32 mask asm("t0") = CSR_CRMD_IE;
+
 	__asm__ __volatile__(
 		"csrxchg %[val], %[mask], %[reg]\n\t"
 		: [val] "+r" (flags)
-		: [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD)
+		: [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD)
 		: "memory");
 }
 
 static inline void arch_local_irq_disable(void)
 {
 	u32 flags = 0;
+	register u32 mask asm("t0") = CSR_CRMD_IE;
+
 	__asm__ __volatile__(
 		"csrxchg %[val], %[mask], %[reg]\n\t"
 		: [val] "+r" (flags)
-		: [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD)
+		: [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD)
 		: "memory");
 }
 
 static inline unsigned long arch_local_irq_save(void)
 {
 	u32 flags = 0;
+	register u32 mask asm("t0") = CSR_CRMD_IE;
+
 	__asm__ __volatile__(
 		"csrxchg %[val], %[mask], %[reg]\n\t"
 		: [val] "+r" (flags)
-		: [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD)
+		: [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD)
 		: "memory");
 	return flags;
 }
 
 static inline void arch_local_irq_restore(unsigned long flags)
 {
+	register u32 mask asm("t0") = CSR_CRMD_IE;
+
 	__asm__ __volatile__(
 		"csrxchg %[val], %[mask], %[reg]\n\t"
 		: [val] "+r" (flags)
-		: [mask] "r" (CSR_CRMD_IE), [reg] "i" (LOONGARCH_CSR_CRMD)
+		: [mask] "r" (mask), [reg] "i" (LOONGARCH_CSR_CRMD)
 		: "memory");
 }
 
@@ -72,6 +80,6 @@ static inline int arch_irqs_disabled(void)
 	return arch_irqs_disabled_flags(arch_local_save_flags());
 }
 
-#endif /* #ifndef __ASSEMBLY__ */
+#endif /* #ifndef __ASSEMBLER__ */
 
 #endif /* _ASM_IRQFLAGS_H */
diff --git a/arch/loongarch/include/asm/jump_label.h b/arch/loongarch/include/asm/jump_label.h
index 8a924bd69d19..4000c7603d8e 100644
--- a/arch/loongarch/include/asm/jump_label.h
+++ b/arch/loongarch/include/asm/jump_label.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_JUMP_LABEL_H
 #define __ASM_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 
@@ -50,5 +50,5 @@ l_yes:
 	return true;
 }
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif	/* __ASM_JUMP_LABEL_H */
diff --git a/arch/loongarch/include/asm/kasan.h b/arch/loongarch/include/asm/kasan.h
index 7f52bd31b9d4..0e50e5b5e056 100644
--- a/arch/loongarch/include/asm/kasan.h
+++ b/arch/loongarch/include/asm/kasan.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_KASAN_H
 #define __ASM_KASAN_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/linkage.h>
 #include <linux/mmzone.h>
@@ -66,7 +66,6 @@
 #define XKPRANGE_WC_SHADOW_OFFSET	(KASAN_SHADOW_START + XKPRANGE_WC_KASAN_OFFSET)
 #define XKVRANGE_VC_SHADOW_OFFSET	(KASAN_SHADOW_START + XKVRANGE_VC_KASAN_OFFSET)
 
-extern bool kasan_early_stage;
 extern unsigned char kasan_early_shadow_page[PAGE_SIZE];
 
 #define kasan_mem_to_shadow kasan_mem_to_shadow
@@ -75,12 +74,6 @@ void *kasan_mem_to_shadow(const void *addr);
 #define kasan_shadow_to_mem kasan_shadow_to_mem
 const void *kasan_shadow_to_mem(const void *shadow_addr);
 
-#define kasan_arch_is_ready kasan_arch_is_ready
-static __always_inline bool kasan_arch_is_ready(void)
-{
-	return !kasan_early_stage;
-}
-
 #define addr_has_metadata addr_has_metadata
 static __always_inline bool addr_has_metadata(const void *addr)
 {
diff --git a/arch/loongarch/include/asm/kexec.h b/arch/loongarch/include/asm/kexec.h
index cf95cd3eb2de..209fa43222e1 100644
--- a/arch/loongarch/include/asm/kexec.h
+++ b/arch/loongarch/include/asm/kexec.h
@@ -41,6 +41,18 @@ struct kimage_arch {
 	unsigned long systable_ptr;
 };
 
+#ifdef CONFIG_KEXEC_FILE
+extern const struct kexec_file_ops kexec_efi_ops;
+extern const struct kexec_file_ops kexec_elf_ops;
+
+int arch_kimage_file_post_load_cleanup(struct kimage *image);
+#define arch_kimage_file_post_load_cleanup arch_kimage_file_post_load_cleanup
+
+extern int load_other_segments(struct kimage *image,
+		unsigned long kernel_load_addr, unsigned long kernel_size,
+		char *initrd, unsigned long initrd_len, char *cmdline, unsigned long cmdline_len);
+#endif
+
 typedef void (*do_kexec_t)(unsigned long efi_boot,
 			   unsigned long cmdline_ptr,
 			   unsigned long systable_ptr,
diff --git a/arch/loongarch/include/asm/kvm_eiointc.h b/arch/loongarch/include/asm/kvm_eiointc.h
index a3a40aba8acf..8b7a2fa3f7f8 100644
--- a/arch/loongarch/include/asm/kvm_eiointc.h
+++ b/arch/loongarch/include/asm/kvm_eiointc.h
@@ -10,10 +10,7 @@
 
 #define EIOINTC_IRQS			256
 #define EIOINTC_ROUTE_MAX_VCPUS		256
-#define EIOINTC_IRQS_U8_NUMS		(EIOINTC_IRQS / 8)
-#define EIOINTC_IRQS_U16_NUMS		(EIOINTC_IRQS_U8_NUMS / 2)
-#define EIOINTC_IRQS_U32_NUMS		(EIOINTC_IRQS_U8_NUMS / 4)
-#define EIOINTC_IRQS_U64_NUMS		(EIOINTC_IRQS_U8_NUMS / 8)
+#define EIOINTC_IRQS_U64_NUMS		(EIOINTC_IRQS / 64)
 /* map to ipnum per 32 irqs */
 #define EIOINTC_IRQS_NODETYPE_COUNT	16
 
@@ -64,54 +61,18 @@ struct loongarch_eiointc {
 	uint32_t status;
 
 	/* hardware state */
-	union nodetype {
-		u64 reg_u64[EIOINTC_IRQS_NODETYPE_COUNT / 4];
-		u32 reg_u32[EIOINTC_IRQS_NODETYPE_COUNT / 2];
-		u16 reg_u16[EIOINTC_IRQS_NODETYPE_COUNT];
-		u8 reg_u8[EIOINTC_IRQS_NODETYPE_COUNT * 2];
-	} nodetype;
+	u64 nodetype[EIOINTC_IRQS_NODETYPE_COUNT / 4];
 
 	/* one bit shows the state of one irq */
-	union bounce {
-		u64 reg_u64[EIOINTC_IRQS_U64_NUMS];
-		u32 reg_u32[EIOINTC_IRQS_U32_NUMS];
-		u16 reg_u16[EIOINTC_IRQS_U16_NUMS];
-		u8 reg_u8[EIOINTC_IRQS_U8_NUMS];
-	} bounce;
-
-	union isr {
-		u64 reg_u64[EIOINTC_IRQS_U64_NUMS];
-		u32 reg_u32[EIOINTC_IRQS_U32_NUMS];
-		u16 reg_u16[EIOINTC_IRQS_U16_NUMS];
-		u8 reg_u8[EIOINTC_IRQS_U8_NUMS];
-	} isr;
-	union coreisr {
-		u64 reg_u64[EIOINTC_ROUTE_MAX_VCPUS][EIOINTC_IRQS_U64_NUMS];
-		u32 reg_u32[EIOINTC_ROUTE_MAX_VCPUS][EIOINTC_IRQS_U32_NUMS];
-		u16 reg_u16[EIOINTC_ROUTE_MAX_VCPUS][EIOINTC_IRQS_U16_NUMS];
-		u8 reg_u8[EIOINTC_ROUTE_MAX_VCPUS][EIOINTC_IRQS_U8_NUMS];
-	} coreisr;
-	union enable {
-		u64 reg_u64[EIOINTC_IRQS_U64_NUMS];
-		u32 reg_u32[EIOINTC_IRQS_U32_NUMS];
-		u16 reg_u16[EIOINTC_IRQS_U16_NUMS];
-		u8 reg_u8[EIOINTC_IRQS_U8_NUMS];
-	} enable;
+	u64 bounce[EIOINTC_IRQS_U64_NUMS];
+	u64 isr[EIOINTC_IRQS_U64_NUMS];
+	u64 coreisr[EIOINTC_ROUTE_MAX_VCPUS][EIOINTC_IRQS_U64_NUMS];
+	u64 enable[EIOINTC_IRQS_U64_NUMS];
 
 	/* use one byte to config ipmap for 32 irqs at once */
-	union ipmap {
-		u64 reg_u64;
-		u32 reg_u32[EIOINTC_IRQS_U32_NUMS / 4];
-		u16 reg_u16[EIOINTC_IRQS_U16_NUMS / 4];
-		u8 reg_u8[EIOINTC_IRQS_U8_NUMS / 4];
-	} ipmap;
+	u64 ipmap;
 	/* use one byte to config coremap for one irq */
-	union coremap {
-		u64 reg_u64[EIOINTC_IRQS / 8];
-		u32 reg_u32[EIOINTC_IRQS / 4];
-		u16 reg_u16[EIOINTC_IRQS / 2];
-		u8 reg_u8[EIOINTC_IRQS];
-	} coremap;
+	u64 coremap[EIOINTC_IRQS / 8];
 
 	DECLARE_BITMAP(sw_coreisr[EIOINTC_ROUTE_MAX_VCPUS][LOONGSON_IP_NUM], EIOINTC_IRQS);
 	uint8_t  sw_coremap[EIOINTC_IRQS];
diff --git a/arch/loongarch/include/asm/kvm_host.h b/arch/loongarch/include/asm/kvm_host.h
index 7b8367c39da8..e4fe5b8e8149 100644
--- a/arch/loongarch/include/asm/kvm_host.h
+++ b/arch/loongarch/include/asm/kvm_host.h
@@ -12,6 +12,7 @@
 #include <linux/kvm.h>
 #include <linux/kvm_types.h>
 #include <linux/mutex.h>
+#include <linux/perf_event.h>
 #include <linux/spinlock.h>
 #include <linux/threads.h>
 #include <linux/types.h>
@@ -49,12 +50,6 @@ struct kvm_vm_stat {
 	struct kvm_vm_stat_generic generic;
 	u64 pages;
 	u64 hugepages;
-	u64 ipi_read_exits;
-	u64 ipi_write_exits;
-	u64 eiointc_read_exits;
-	u64 eiointc_write_exits;
-	u64 pch_pic_read_exits;
-	u64 pch_pic_write_exits;
 };
 
 struct kvm_vcpu_stat {
@@ -64,6 +59,12 @@ struct kvm_vcpu_stat {
 	u64 cpucfg_exits;
 	u64 signal_exits;
 	u64 hypercall_exits;
+	u64 ipi_read_exits;
+	u64 ipi_write_exits;
+	u64 eiointc_read_exits;
+	u64 eiointc_write_exits;
+	u64 pch_pic_read_exits;
+	u64 pch_pic_write_exits;
 };
 
 #define KVM_MEM_HUGEPAGE_CAPABLE	(1UL << 0)
@@ -125,6 +126,8 @@ struct kvm_arch {
 	struct kvm_phyid_map  *phyid_map;
 	/* Enabled PV features */
 	unsigned long pv_features;
+	/* Supported KVM features */
+	unsigned long kvm_features;
 
 	s64 time_offset;
 	struct kvm_context __percpu *vmcs;
@@ -162,6 +165,7 @@ enum emulation_result {
 #define LOONGARCH_PV_FEAT_UPDATED	BIT_ULL(63)
 #define LOONGARCH_PV_FEAT_MASK		(BIT(KVM_FEATURE_IPI) |		\
 					 BIT(KVM_FEATURE_STEAL_TIME) |	\
+					 BIT(KVM_FEATURE_USER_HCALL) |	\
 					 BIT(KVM_FEATURE_VIRT_EXTIOI))
 
 struct kvm_vcpu_arch {
@@ -175,6 +179,9 @@ struct kvm_vcpu_arch {
 	/* Pointers stored here for easy accessing from assembly code */
 	int (*handle_exit)(struct kvm_run *run, struct kvm_vcpu *vcpu);
 
+	/* GPA (=HVA) of PGD for secondary mmu */
+	unsigned long kvm_pgd;
+
 	/* Host registers preserved across guest mode execution */
 	unsigned long host_sp;
 	unsigned long host_tp;
@@ -288,13 +295,21 @@ static inline int kvm_get_pmu_num(struct kvm_vcpu_arch *arch)
 	return (arch->cpucfg[6] & CPUCFG6_PMNUM) >> CPUCFG6_PMNUM_SHIFT;
 }
 
+/* Check whether KVM support this feature (VMM may disable it) */
+static inline bool kvm_vm_support(struct kvm_arch *arch, int feature)
+{
+	return !!(arch->kvm_features & BIT_ULL(feature));
+}
+
+bool kvm_arch_pmi_in_guest(struct kvm_vcpu *vcpu);
+
 /* Debug: dump vcpu state */
 int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu);
 
 /* MMU handling */
 void kvm_flush_tlb_all(void);
 void kvm_flush_tlb_gpa(struct kvm_vcpu *vcpu, unsigned long gpa);
-int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long badv, bool write);
+int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long badv, bool write, int ecode);
 
 int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end, bool blockable);
 int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end);
@@ -319,7 +334,6 @@ static inline bool kvm_is_ifetch_fault(struct kvm_vcpu_arch *arch)
 
 /* Misc */
 static inline void kvm_arch_hardware_unsetup(void) {}
-static inline void kvm_arch_sync_events(struct kvm *kvm) {}
 static inline void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen) {}
 static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) {}
diff --git a/arch/loongarch/include/asm/kvm_mmu.h b/arch/loongarch/include/asm/kvm_mmu.h
index 099bafc6f797..e36cc7e8ed20 100644
--- a/arch/loongarch/include/asm/kvm_mmu.h
+++ b/arch/loongarch/include/asm/kvm_mmu.h
@@ -16,6 +16,13 @@
  */
 #define KVM_MMU_CACHE_MIN_PAGES	(CONFIG_PGTABLE_LEVELS - 1)
 
+/*
+ * _PAGE_MODIFIED is a SW pte bit, it records page ever written on host
+ * kernel, on secondary MMU it records the page writeable attribute, in
+ * order for fast path handling.
+ */
+#define KVM_PAGE_WRITEABLE	_PAGE_MODIFIED
+
 #define _KVM_FLUSH_PGTABLE	0x1
 #define _KVM_HAS_PGMASK		0x2
 #define kvm_pfn_pte(pfn, prot)	(((pfn) << PFN_PTE_SHIFT) | pgprot_val(prot))
@@ -52,10 +59,10 @@ static inline void kvm_set_pte(kvm_pte_t *ptep, kvm_pte_t val)
 	WRITE_ONCE(*ptep, val);
 }
 
-static inline int kvm_pte_write(kvm_pte_t pte) { return pte & _PAGE_WRITE; }
-static inline int kvm_pte_dirty(kvm_pte_t pte) { return pte & _PAGE_DIRTY; }
 static inline int kvm_pte_young(kvm_pte_t pte) { return pte & _PAGE_ACCESSED; }
 static inline int kvm_pte_huge(kvm_pte_t pte) { return pte & _PAGE_HUGE; }
+static inline int kvm_pte_dirty(kvm_pte_t pte) { return pte & __WRITEABLE; }
+static inline int kvm_pte_writeable(kvm_pte_t pte) { return pte & KVM_PAGE_WRITEABLE; }
 
 static inline kvm_pte_t kvm_pte_mkyoung(kvm_pte_t pte)
 {
@@ -69,12 +76,12 @@ static inline kvm_pte_t kvm_pte_mkold(kvm_pte_t pte)
 
 static inline kvm_pte_t kvm_pte_mkdirty(kvm_pte_t pte)
 {
-	return pte | _PAGE_DIRTY;
+	return pte | __WRITEABLE;
 }
 
 static inline kvm_pte_t kvm_pte_mkclean(kvm_pte_t pte)
 {
-	return pte & ~_PAGE_DIRTY;
+	return pte & ~__WRITEABLE;
 }
 
 static inline kvm_pte_t kvm_pte_mkhuge(kvm_pte_t pte)
@@ -87,6 +94,11 @@ static inline kvm_pte_t kvm_pte_mksmall(kvm_pte_t pte)
 	return pte & ~_PAGE_HUGE;
 }
 
+static inline kvm_pte_t kvm_pte_mkwriteable(kvm_pte_t pte)
+{
+	return pte | KVM_PAGE_WRITEABLE;
+}
+
 static inline int kvm_need_flush(kvm_ptw_ctx *ctx)
 {
 	return ctx->flag & _KVM_FLUSH_PGTABLE;
diff --git a/arch/loongarch/include/asm/kvm_para.h b/arch/loongarch/include/asm/kvm_para.h
index c4e84227280d..3e4b397f423f 100644
--- a/arch/loongarch/include/asm/kvm_para.h
+++ b/arch/loongarch/include/asm/kvm_para.h
@@ -13,6 +13,7 @@
 
 #define KVM_HCALL_CODE_SERVICE		0
 #define KVM_HCALL_CODE_SWDBG		1
+#define KVM_HCALL_CODE_USER_SERVICE	2
 
 #define KVM_HCALL_SERVICE		HYPERCALL_ENCODE(HYPERVISOR_KVM, KVM_HCALL_CODE_SERVICE)
 #define  KVM_HCALL_FUNC_IPI		1
@@ -20,6 +21,8 @@
 
 #define KVM_HCALL_SWDBG			HYPERCALL_ENCODE(HYPERVISOR_KVM, KVM_HCALL_CODE_SWDBG)
 
+#define KVM_HCALL_USER_SERVICE		HYPERCALL_ENCODE(HYPERVISOR_KVM, KVM_HCALL_CODE_USER_SERVICE)
+
 /*
  * LoongArch hypercall return code
  */
diff --git a/arch/loongarch/include/asm/kvm_pch_pic.h b/arch/loongarch/include/asm/kvm_pch_pic.h
index e6df6a4c1c70..7f33a3039272 100644
--- a/arch/loongarch/include/asm/kvm_pch_pic.h
+++ b/arch/loongarch/include/asm/kvm_pch_pic.h
@@ -34,13 +34,26 @@
 #define PCH_PIC_INT_ISR_END		0x3af
 #define PCH_PIC_POLARITY_START		0x3e0
 #define PCH_PIC_POLARITY_END		0x3e7
-#define PCH_PIC_INT_ID_VAL		0x7000000UL
+#define PCH_PIC_INT_ID_VAL		0x7UL
 #define PCH_PIC_INT_ID_VER		0x1UL
 
+union pch_pic_id {
+	struct {
+		uint8_t reserved_0[3];
+		uint8_t id;
+		uint8_t version;
+		uint8_t reserved_1;
+		uint8_t irq_num;
+		uint8_t reserved_2;
+	} desc;
+	uint64_t data;
+};
+
 struct loongarch_pch_pic {
 	spinlock_t lock;
 	struct kvm *kvm;
 	struct kvm_io_device device;
+	union pch_pic_id id;
 	uint64_t mask; /* 1:disable irq, 0:enable irq */
 	uint64_t htmsi_en; /* 1:msi */
 	uint64_t edge; /* 1:edge triggered, 0:level triggered */
diff --git a/arch/loongarch/include/asm/kvm_vcpu.h b/arch/loongarch/include/asm/kvm_vcpu.h
index d7e8f7d50ee0..3784ab4ccdb5 100644
--- a/arch/loongarch/include/asm/kvm_vcpu.h
+++ b/arch/loongarch/include/asm/kvm_vcpu.h
@@ -15,6 +15,7 @@
 #define CPU_PMU				(_ULCAST_(1) << 10)
 #define CPU_TIMER			(_ULCAST_(1) << 11)
 #define CPU_IPI				(_ULCAST_(1) << 12)
+#define CPU_AVEC                        (_ULCAST_(1) << 14)
 
 /* Controlled by 0x52 guest exception VIP aligned to estat bit 5~12 */
 #define CPU_IP0				(_ULCAST_(1))
@@ -37,12 +38,13 @@
 #define KVM_LOONGSON_IRQ_NUM_MASK	0xffff
 
 typedef union loongarch_instruction  larch_inst;
-typedef int (*exit_handle_fn)(struct kvm_vcpu *);
+typedef int (*exit_handle_fn)(struct kvm_vcpu *, int);
 
 int  kvm_emu_mmio_read(struct kvm_vcpu *vcpu, larch_inst inst);
 int  kvm_emu_mmio_write(struct kvm_vcpu *vcpu, larch_inst inst);
 int  kvm_complete_mmio_read(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int  kvm_complete_iocsr_read(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int  kvm_complete_user_service(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int  kvm_emu_idle(struct kvm_vcpu *vcpu);
 int  kvm_pending_timer(struct kvm_vcpu *vcpu);
 int  kvm_handle_fault(struct kvm_vcpu *vcpu, int fault);
diff --git a/arch/loongarch/include/asm/lbt.h b/arch/loongarch/include/asm/lbt.h
index e671978bf552..38566574e562 100644
--- a/arch/loongarch/include/asm/lbt.h
+++ b/arch/loongarch/include/asm/lbt.h
@@ -12,9 +12,13 @@
 #include <asm/loongarch.h>
 #include <asm/processor.h>
 
-extern void _init_lbt(void);
-extern void _save_lbt(struct loongarch_lbt *);
-extern void _restore_lbt(struct loongarch_lbt *);
+asmlinkage void _init_lbt(void);
+asmlinkage void _save_lbt(struct loongarch_lbt *);
+asmlinkage void _restore_lbt(struct loongarch_lbt *);
+asmlinkage int _save_lbt_context(void __user *regs, void __user *eflags);
+asmlinkage int _restore_lbt_context(void __user *regs, void __user *eflags);
+asmlinkage int _save_ftop_context(void __user *ftop);
+asmlinkage int _restore_ftop_context(void __user *ftop);
 
 static inline int is_lbt_enabled(void)
 {
diff --git a/arch/loongarch/include/asm/loongarch.h b/arch/loongarch/include/asm/loongarch.h
index 64ad277e096e..58a4a3b6b035 100644
--- a/arch/loongarch/include/asm/loongarch.h
+++ b/arch/loongarch/include/asm/loongarch.h
@@ -9,15 +9,15 @@
 #include <linux/linkage.h>
 #include <linux/types.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <larchintrin.h>
 
 /* CPUCFG */
 #define read_cpucfg(reg) __cpucfg(reg)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 /* LoongArch Registers */
 #define REG_ZERO	0x0
@@ -53,7 +53,7 @@
 #define REG_S7		0x1e
 #define REG_S8		0x1f
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /* Bit fields for CPUCFG registers */
 #define LOONGARCH_CPUCFG0		0x0
@@ -108,6 +108,12 @@
 #define  CPUCFG3_SPW_HG_HF		BIT(11)
 #define  CPUCFG3_RVA			BIT(12)
 #define  CPUCFG3_RVAMAX			GENMASK(16, 13)
+#define  CPUCFG3_ALDORDER_CAP		BIT(18) /* All address load ordered, capability */
+#define  CPUCFG3_ASTORDER_CAP		BIT(19) /* All address store ordered, capability */
+#define  CPUCFG3_ALDORDER_STA		BIT(20) /* All address load ordered, status */
+#define  CPUCFG3_ASTORDER_STA		BIT(21) /* All address store ordered, status */
+#define  CPUCFG3_SLDORDER_CAP		BIT(22) /* Same address load ordered, capability */
+#define  CPUCFG3_SLDORDER_STA		BIT(23) /* Same address load ordered, status */
 
 #define LOONGARCH_CPUCFG4		0x4
 #define  CPUCFG4_CCFREQ			GENMASK(31, 0)
@@ -122,6 +128,7 @@
 #define  CPUCFG6_PMNUM			GENMASK(7, 4)
 #define  CPUCFG6_PMNUM_SHIFT		4
 #define  CPUCFG6_PMBITS			GENMASK(13, 8)
+#define  CPUCFG6_PMBITS_SHIFT		8
 #define  CPUCFG6_UPM			BIT(14)
 
 #define LOONGARCH_CPUCFG16		0x10
@@ -165,7 +172,7 @@
  * SW emulation for KVM hypervirsor, see arch/loongarch/include/uapi/asm/kvm_para.h
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* CSR */
 #define csr_read32(reg) __csrrd_w(reg)
@@ -181,7 +188,7 @@
 #define iocsr_write32(val, reg) __iocsrwr_w(val, reg)
 #define iocsr_write64(val, reg) __iocsrwr_d(val, reg)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* CSR register number */
 
@@ -405,8 +412,8 @@
 
 /* Config CSR registers */
 #define LOONGARCH_CSR_CPUID		0x20	/* CPU core id */
-#define  CSR_CPUID_COREID_WIDTH		9
-#define  CSR_CPUID_COREID		_ULCAST_(0x1ff)
+#define  CSR_CPUID_COREID_WIDTH		11
+#define  CSR_CPUID_COREID		_ULCAST_(0x7ff)
 
 #define LOONGARCH_CSR_PRCFG1		0x21	/* Config1 */
 #define  CSR_CONF1_VSMAX_SHIFT		12
@@ -445,6 +452,13 @@
 #define LOONGARCH_CSR_KS6		0x36
 #define LOONGARCH_CSR_KS7		0x37
 #define LOONGARCH_CSR_KS8		0x38
+#define LOONGARCH_CSR_KS9		0x39
+#define LOONGARCH_CSR_KS10		0x3a
+#define LOONGARCH_CSR_KS11		0x3b
+#define LOONGARCH_CSR_KS12		0x3c
+#define LOONGARCH_CSR_KS13		0x3d
+#define LOONGARCH_CSR_KS14		0x3e
+#define LOONGARCH_CSR_KS15		0x3f
 
 /* Exception allocated KS0, KS1 and KS2 statically */
 #define EXCEPTION_KS0			LOONGARCH_CSR_KS0
@@ -466,7 +480,6 @@
 
 #define LOONGARCH_CSR_TCFG		0x41	/* Timer config */
 #define  CSR_TCFG_VAL_SHIFT		2
-#define	 CSR_TCFG_VAL_WIDTH		48
 #define  CSR_TCFG_VAL			(_ULCAST_(0x3fffffffffff) << CSR_TCFG_VAL_SHIFT)
 #define  CSR_TCFG_PERIOD_SHIFT		1
 #define  CSR_TCFG_PERIOD		(_ULCAST_(0x1) << CSR_TCFG_PERIOD_SHIFT)
@@ -498,6 +511,8 @@
 #define  CSR_GCFG_GPERF_SHIFT		24
 #define  CSR_GCFG_GPERF_WIDTH		3
 #define  CSR_GCFG_GPERF			(_ULCAST_(0x7) << CSR_GCFG_GPERF_SHIFT)
+#define  CSR_GCFG_GPMP_SHIFT		23
+#define  CSR_GCFG_GPMP			(_ULCAST_(0x1) << CSR_GCFG_GPMP_SHIFT)
 #define  CSR_GCFG_GCI_SHIFT		20
 #define  CSR_GCFG_GCI_WIDTH		2
 #define  CSR_GCFG_GCI			(_ULCAST_(0x3) << CSR_GCFG_GCI_SHIFT)
@@ -566,6 +581,15 @@
 
 /* Implement dependent */
 #define LOONGARCH_CSR_IMPCTL1		0x80	/* Loongson config1 */
+#define  CSR_LDSTORDER_SHIFT		28
+#define  CSR_LDSTORDER_WIDTH		3
+#define  CSR_LDSTORDER_MASK		(_ULCAST_(0x7) << CSR_LDSTORDER_SHIFT)
+#define  CSR_LDSTORDER_NLD_NST		(_ULCAST_(0x0) << CSR_LDSTORDER_SHIFT) /* 000 = No Load No Store */
+#define  CSR_LDSTORDER_ALD_NST		(_ULCAST_(0x1) << CSR_LDSTORDER_SHIFT) /* 001 = All Load No Store */
+#define  CSR_LDSTORDER_SLD_NST		(_ULCAST_(0x3) << CSR_LDSTORDER_SHIFT) /* 011 = Same Load No Store */
+#define  CSR_LDSTORDER_NLD_AST		(_ULCAST_(0x4) << CSR_LDSTORDER_SHIFT) /* 100 = No Load All Store */
+#define  CSR_LDSTORDER_ALD_AST		(_ULCAST_(0x5) << CSR_LDSTORDER_SHIFT) /* 101 = All Load All Store */
+#define  CSR_LDSTORDER_SLD_AST		(_ULCAST_(0x7) << CSR_LDSTORDER_SHIFT) /* 111 = Same Load All Store */
 #define  CSR_MISPEC_SHIFT		20
 #define  CSR_MISPEC_WIDTH		8
 #define  CSR_MISPEC			(_ULCAST_(0xff) << CSR_MISPEC_SHIFT)
@@ -959,6 +983,36 @@
 #define LOONGARCH_CSR_DB7CTRL		0x34a	/* data breakpoint 7 control */
 #define LOONGARCH_CSR_DB7ASID		0x34b	/* data breakpoint 7 asid */
 
+#define LOONGARCH_CSR_DB8ADDR		0x350	/* data breakpoint 8 address */
+#define LOONGARCH_CSR_DB8MASK		0x351	/* data breakpoint 8 mask */
+#define LOONGARCH_CSR_DB8CTRL		0x352	/* data breakpoint 8 control */
+#define LOONGARCH_CSR_DB8ASID		0x353	/* data breakpoint 8 asid */
+
+#define LOONGARCH_CSR_DB9ADDR		0x358	/* data breakpoint 9 address */
+#define LOONGARCH_CSR_DB9MASK		0x359	/* data breakpoint 9 mask */
+#define LOONGARCH_CSR_DB9CTRL		0x35a	/* data breakpoint 9 control */
+#define LOONGARCH_CSR_DB9ASID		0x35b	/* data breakpoint 9 asid */
+
+#define LOONGARCH_CSR_DB10ADDR		0x360	/* data breakpoint 10 address */
+#define LOONGARCH_CSR_DB10MASK		0x361	/* data breakpoint 10 mask */
+#define LOONGARCH_CSR_DB10CTRL		0x362	/* data breakpoint 10 control */
+#define LOONGARCH_CSR_DB10ASID		0x363	/* data breakpoint 10 asid */
+
+#define LOONGARCH_CSR_DB11ADDR		0x368	/* data breakpoint 11 address */
+#define LOONGARCH_CSR_DB11MASK		0x369	/* data breakpoint 11 mask */
+#define LOONGARCH_CSR_DB11CTRL		0x36a	/* data breakpoint 11 control */
+#define LOONGARCH_CSR_DB11ASID		0x36b	/* data breakpoint 11 asid */
+
+#define LOONGARCH_CSR_DB12ADDR		0x370	/* data breakpoint 12 address */
+#define LOONGARCH_CSR_DB12MASK		0x371	/* data breakpoint 12 mask */
+#define LOONGARCH_CSR_DB12CTRL		0x372	/* data breakpoint 12 control */
+#define LOONGARCH_CSR_DB12ASID		0x373	/* data breakpoint 12 asid */
+
+#define LOONGARCH_CSR_DB13ADDR		0x378	/* data breakpoint 13 address */
+#define LOONGARCH_CSR_DB13MASK		0x379	/* data breakpoint 13 mask */
+#define LOONGARCH_CSR_DB13CTRL		0x37a	/* data breakpoint 13 control */
+#define LOONGARCH_CSR_DB13ASID		0x37b	/* data breakpoint 13 asid */
+
 #define LOONGARCH_CSR_FWPC		0x380	/* instruction breakpoint config */
 #define LOONGARCH_CSR_FWPS		0x381	/* instruction breakpoint status */
 
@@ -1002,6 +1056,36 @@
 #define LOONGARCH_CSR_IB7CTRL		0x3ca	/* inst breakpoint 7 control */
 #define LOONGARCH_CSR_IB7ASID		0x3cb	/* inst breakpoint 7 asid */
 
+#define LOONGARCH_CSR_IB8ADDR		0x3d0	/* inst breakpoint 8 address */
+#define LOONGARCH_CSR_IB8MASK		0x3d1	/* inst breakpoint 8 mask */
+#define LOONGARCH_CSR_IB8CTRL		0x3d2	/* inst breakpoint 8 control */
+#define LOONGARCH_CSR_IB8ASID		0x3d3	/* inst breakpoint 8 asid */
+
+#define LOONGARCH_CSR_IB9ADDR		0x3d8	/* inst breakpoint 9 address */
+#define LOONGARCH_CSR_IB9MASK		0x3d9	/* inst breakpoint 9 mask */
+#define LOONGARCH_CSR_IB9CTRL		0x3da	/* inst breakpoint 9 control */
+#define LOONGARCH_CSR_IB9ASID		0x3db	/* inst breakpoint 9 asid */
+
+#define LOONGARCH_CSR_IB10ADDR		0x3e0	/* inst breakpoint 10 address */
+#define LOONGARCH_CSR_IB10MASK		0x3e1	/* inst breakpoint 10 mask */
+#define LOONGARCH_CSR_IB10CTRL		0x3e2	/* inst breakpoint 10 control */
+#define LOONGARCH_CSR_IB10ASID		0x3e3	/* inst breakpoint 10 asid */
+
+#define LOONGARCH_CSR_IB11ADDR		0x3e8	/* inst breakpoint 11 address */
+#define LOONGARCH_CSR_IB11MASK		0x3e9	/* inst breakpoint 11 mask */
+#define LOONGARCH_CSR_IB11CTRL		0x3ea	/* inst breakpoint 11 control */
+#define LOONGARCH_CSR_IB11ASID		0x3eb	/* inst breakpoint 11 asid */
+
+#define LOONGARCH_CSR_IB12ADDR		0x3f0	/* inst breakpoint 12 address */
+#define LOONGARCH_CSR_IB12MASK		0x3f1	/* inst breakpoint 12 mask */
+#define LOONGARCH_CSR_IB12CTRL		0x3f2	/* inst breakpoint 12 control */
+#define LOONGARCH_CSR_IB12ASID		0x3f3	/* inst breakpoint 12 asid */
+
+#define LOONGARCH_CSR_IB13ADDR		0x3f8	/* inst breakpoint 13 address */
+#define LOONGARCH_CSR_IB13MASK		0x3f9	/* inst breakpoint 13 mask */
+#define LOONGARCH_CSR_IB13CTRL		0x3fa	/* inst breakpoint 13 control */
+#define LOONGARCH_CSR_IB13ASID		0x3fb	/* inst breakpoint 13 asid */
+
 #define LOONGARCH_CSR_DEBUG		0x500	/* debug config */
 #define LOONGARCH_CSR_DERA		0x501	/* debug era */
 #define LOONGARCH_CSR_DESAVE		0x502	/* debug save */
@@ -1056,6 +1140,7 @@
 #define  IOCSRF_FLATMODE		BIT_ULL(10)
 #define  IOCSRF_VM			BIT_ULL(11)
 #define  IOCSRF_AVEC			BIT_ULL(15)
+#define  IOCSRF_REDIRECT		BIT_ULL(16)
 
 #define LOONGARCH_IOCSR_VENDOR		0x10
 
@@ -1121,7 +1206,7 @@
 #define LOONGARCH_IOCSR_EXTIOI_ROUTE_BASE	0x1c00
 #define IOCSR_EXTIOI_VECTOR_NUM			256
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static __always_inline u64 drdtime(void)
 {
@@ -1283,7 +1368,7 @@ __BUILD_CSR_OP(tlbidx)
 #define clear_csr_estat(val)	\
 	csr_xchg32(~(val), val, LOONGARCH_CSR_ESTAT)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /* Generic EntryLo bit definitions */
 #define ENTRYLO_V		(_ULCAST_(1) << 0)
diff --git a/arch/loongarch/include/asm/numa.h b/arch/loongarch/include/asm/numa.h
index b5f9de9f102e..bbf9f70bd25f 100644
--- a/arch/loongarch/include/asm/numa.h
+++ b/arch/loongarch/include/asm/numa.h
@@ -22,20 +22,6 @@ extern int numa_off;
 extern s16 __cpuid_to_node[CONFIG_NR_CPUS];
 extern nodemask_t numa_nodes_parsed __initdata;
 
-struct numa_memblk {
-	u64			start;
-	u64			end;
-	int			nid;
-};
-
-#define NR_NODE_MEMBLKS		(MAX_NUMNODES*2)
-struct numa_meminfo {
-	int			nr_blks;
-	struct numa_memblk	blk[NR_NODE_MEMBLKS];
-};
-
-extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
-
 extern void __init early_numa_add_cpu(int cpuid, s16 node);
 extern void numa_add_cpu(unsigned int cpu);
 extern void numa_remove_cpu(unsigned int cpu);
diff --git a/arch/loongarch/include/asm/orc_types.h b/arch/loongarch/include/asm/orc_types.h
index caf1f71a1057..d5fa98d1d177 100644
--- a/arch/loongarch/include/asm/orc_types.h
+++ b/arch/loongarch/include/asm/orc_types.h
@@ -34,7 +34,7 @@
 #define ORC_TYPE_REGS			3
 #define ORC_TYPE_REGS_PARTIAL		4
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * This struct is more or less a vastly simplified version of the DWARF Call
  * Frame Information standard.  It contains only the necessary parts of DWARF
@@ -53,6 +53,6 @@ struct orc_entry {
 	unsigned int	type:3;
 	unsigned int	signal:1;
 };
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ORC_TYPES_H */
diff --git a/arch/loongarch/include/asm/page.h b/arch/loongarch/include/asm/page.h
index 7368f12b7cb1..a3aaf34fba16 100644
--- a/arch/loongarch/include/asm/page.h
+++ b/arch/loongarch/include/asm/page.h
@@ -15,7 +15,7 @@
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/kernel.h>
 #include <linux/pfn.h>
@@ -110,6 +110,6 @@ extern int __virt_addr_valid(volatile void *kaddr);
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_PAGE_H */
diff --git a/arch/loongarch/include/asm/pgalloc.h b/arch/loongarch/include/asm/pgalloc.h
index a7b9c9e73593..08dcc698ec18 100644
--- a/arch/loongarch/include/asm/pgalloc.h
+++ b/arch/loongarch/include/asm/pgalloc.h
@@ -55,11 +55,8 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
 	return pte;
 }
 
-#define __pte_free_tlb(tlb, pte, address)			\
-do {								\
-	pagetable_pte_dtor(page_ptdesc(pte));			\
-	tlb_remove_page_ptdesc((tlb), page_ptdesc(pte));	\
-} while (0)
+#define __pte_free_tlb(tlb, pte, address)	\
+	tlb_remove_ptdesc((tlb), page_ptdesc(pte))
 
 #ifndef __PAGETABLE_PMD_FOLDED
 
@@ -72,7 +69,7 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 	if (!ptdesc)
 		return NULL;
 
-	if (!pagetable_pmd_ctor(ptdesc)) {
+	if (!pagetable_pmd_ctor(mm, ptdesc)) {
 		pagetable_free(ptdesc);
 		return NULL;
 	}
@@ -91,7 +88,7 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
 {
 	pud_t *pud;
-	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL & ~__GFP_HIGHMEM, 0);
+	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL, 0);
 
 	if (!ptdesc)
 		return NULL;
diff --git a/arch/loongarch/include/asm/pgtable-bits.h b/arch/loongarch/include/asm/pgtable-bits.h
index 82cd3a9f094b..2fc3789220ac 100644
--- a/arch/loongarch/include/asm/pgtable-bits.h
+++ b/arch/loongarch/include/asm/pgtable-bits.h
@@ -22,7 +22,6 @@
 #define	_PAGE_PFN_SHIFT		12
 #define	_PAGE_SWP_EXCLUSIVE_SHIFT 23
 #define	_PAGE_PFN_END_SHIFT	48
-#define	_PAGE_DEVMAP_SHIFT	59
 #define	_PAGE_PRESENT_INVALID_SHIFT 60
 #define	_PAGE_NO_READ_SHIFT	61
 #define	_PAGE_NO_EXEC_SHIFT	62
@@ -36,7 +35,6 @@
 #define _PAGE_MODIFIED		(_ULCAST_(1) << _PAGE_MODIFIED_SHIFT)
 #define _PAGE_PROTNONE		(_ULCAST_(1) << _PAGE_PROTNONE_SHIFT)
 #define _PAGE_SPECIAL		(_ULCAST_(1) << _PAGE_SPECIAL_SHIFT)
-#define _PAGE_DEVMAP		(_ULCAST_(1) << _PAGE_DEVMAP_SHIFT)
 
 /* We borrow bit 23 to store the exclusive marker in swap PTEs. */
 #define _PAGE_SWP_EXCLUSIVE	(_ULCAST_(1) << _PAGE_SWP_EXCLUSIVE_SHIFT)
@@ -76,8 +74,8 @@
 #define __READABLE	(_PAGE_VALID)
 #define __WRITEABLE	(_PAGE_DIRTY | _PAGE_WRITE)
 
-#define _PAGE_CHG_MASK	(_PAGE_MODIFIED | _PAGE_SPECIAL | _PAGE_DEVMAP | _PFN_MASK | _CACHE_MASK | _PAGE_PLV)
-#define _HPAGE_CHG_MASK	(_PAGE_MODIFIED | _PAGE_SPECIAL | _PAGE_DEVMAP | _PFN_MASK | _CACHE_MASK | _PAGE_PLV | _PAGE_HUGE)
+#define _PAGE_CHG_MASK	(_PAGE_MODIFIED | _PAGE_SPECIAL | _PFN_MASK | _CACHE_MASK | _PAGE_PLV)
+#define _HPAGE_CHG_MASK	(_PAGE_MODIFIED | _PAGE_SPECIAL | _PFN_MASK | _CACHE_MASK | _PAGE_PLV | _PAGE_HUGE)
 
 #define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_NO_READ | \
 				 _PAGE_USER | _CACHE_CC)
@@ -92,10 +90,17 @@
 #define PAGE_KERNEL_WUC __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
 				 _PAGE_GLOBAL | _PAGE_KERN |  _CACHE_WUC)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define _PAGE_IOREMAP		pgprot_val(PAGE_KERNEL_SUC)
 
+#define pgprot_nx pgprot_nx
+
+static inline pgprot_t pgprot_nx(pgprot_t _prot)
+{
+	return __pgprot(pgprot_val(_prot) | _PAGE_NO_EXEC);
+}
+
 #define pgprot_noncached pgprot_noncached
 
 static inline pgprot_t pgprot_noncached(pgprot_t _prot)
@@ -120,6 +125,6 @@ static inline pgprot_t pgprot_writecombine(pgprot_t _prot)
 	return __pgprot(prot);
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_PGTABLE_BITS_H */
diff --git a/arch/loongarch/include/asm/pgtable.h b/arch/loongarch/include/asm/pgtable.h
index da346733a1da..03fb60432fde 100644
--- a/arch/loongarch/include/asm/pgtable.h
+++ b/arch/loongarch/include/asm/pgtable.h
@@ -55,7 +55,7 @@
 
 #define USER_PTRS_PER_PGD       ((TASK_SIZE64 / PGDIR_SIZE)?(TASK_SIZE64 / PGDIR_SIZE):1)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/mm_types.h>
 #include <linux/mmzone.h>
@@ -255,7 +255,6 @@ static inline void pmd_clear(pmd_t *pmdp)
 
 #define pmd_page_vaddr(pmd)	pmd_val(pmd)
 
-extern pmd_t mk_pmd(struct page *page, pgprot_t prot);
 extern void set_pmd_at(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp, pmd_t pmd);
 
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
@@ -302,7 +301,7 @@ static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 #define __pmd_to_swp_entry(pmd) ((swp_entry_t) { pmd_val(pmd) })
 #define __swp_entry_to_pmd(x)	((pmd_t) { (x).val | _PAGE_HUGE })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -410,9 +409,6 @@ static inline int pte_special(pte_t pte)	{ return pte_val(pte) & _PAGE_SPECIAL;
 static inline pte_t pte_mkspecial(pte_t pte)	{ pte_val(pte) |= _PAGE_SPECIAL; return pte; }
 #endif /* CONFIG_ARCH_HAS_PTE_SPECIAL */
 
-static inline int pte_devmap(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_DEVMAP); }
-static inline pte_t pte_mkdevmap(pte_t pte)	{ pte_val(pte) |= _PAGE_DEVMAP; return pte; }
-
 #define pte_accessible pte_accessible
 static inline unsigned long pte_accessible(struct mm_struct *mm, pte_t a)
 {
@@ -426,14 +422,11 @@ static inline unsigned long pte_accessible(struct mm_struct *mm, pte_t a)
 	return false;
 }
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
+	if (pte_val(pte) & _PAGE_DIRTY)
+		pte_val(pte) |= _PAGE_MODIFIED;
+
 	return __pte((pte_val(pte) & _PAGE_CHG_MASK) |
 		     (pgprot_val(newprot) & ~_PAGE_CHG_MASK));
 }
@@ -547,17 +540,6 @@ static inline pmd_t pmd_mkyoung(pmd_t pmd)
 	return pmd;
 }
 
-static inline int pmd_devmap(pmd_t pmd)
-{
-	return !!(pmd_val(pmd) & _PAGE_DEVMAP);
-}
-
-static inline pmd_t pmd_mkdevmap(pmd_t pmd)
-{
-	pmd_val(pmd) |= _PAGE_DEVMAP;
-	return pmd;
-}
-
 static inline struct page *pmd_page(pmd_t pmd)
 {
 	if (pmd_trans_huge(pmd))
@@ -568,9 +550,11 @@ static inline struct page *pmd_page(pmd_t pmd)
 
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 {
-	pmd_val(pmd) = (pmd_val(pmd) & _HPAGE_CHG_MASK) |
-				(pgprot_val(newprot) & ~_HPAGE_CHG_MASK);
-	return pmd;
+	if (pmd_val(pmd) & _PAGE_DIRTY)
+		pmd_val(pmd) |= _PAGE_MODIFIED;
+
+	return __pmd((pmd_val(pmd) & _HPAGE_CHG_MASK) |
+		     (pgprot_val(newprot) & ~_HPAGE_CHG_MASK));
 }
 
 static inline pmd_t pmd_mkinvalid(pmd_t pmd)
@@ -613,11 +597,6 @@ static inline long pmd_protnone(pmd_t pmd)
 #define pmd_leaf(pmd)		((pmd_val(pmd) & _PAGE_HUGE) != 0)
 #define pud_leaf(pud)		((pud_val(pud) & _PAGE_HUGE) != 0)
 
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#define pud_devmap(pud)		(0)
-#define pgd_devmap(pgd)		(0)
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-
 /*
  * We provide our own get_unmapped area to cope with the virtual aliasing
  * constraints placed on us by the cache architecture.
@@ -625,6 +604,6 @@ static inline long pmd_protnone(pmd_t pmd)
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_PGTABLE_H */
diff --git a/arch/loongarch/include/asm/prefetch.h b/arch/loongarch/include/asm/prefetch.h
index 1672262a5e2e..0b168cdaae9a 100644
--- a/arch/loongarch/include/asm/prefetch.h
+++ b/arch/loongarch/include/asm/prefetch.h
@@ -8,7 +8,7 @@
 #define Pref_Load	0
 #define Pref_Store	8
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 	.macro	__pref hint addr
 #ifdef CONFIG_CPU_HAS_PREFETCH
diff --git a/arch/loongarch/include/asm/ptrace.h b/arch/loongarch/include/asm/ptrace.h
index f3ddaed9ef7f..e5d21e836d99 100644
--- a/arch/loongarch/include/asm/ptrace.h
+++ b/arch/loongarch/include/asm/ptrace.h
@@ -33,9 +33,9 @@ struct pt_regs {
 	unsigned long __last[];
 } __aligned(8);
 
-static inline int regs_irqs_disabled(struct pt_regs *regs)
+static __always_inline bool regs_irqs_disabled(struct pt_regs *regs)
 {
-	return arch_irqs_disabled_flags(regs->csr_prmd);
+	return !(regs->csr_prmd & CSR_PRMD_PIE);
 }
 
 static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
@@ -55,7 +55,7 @@ static inline void instruction_pointer_set(struct pt_regs *regs, unsigned long v
 
 /* Query offset/name of register from its name/offset */
 extern int regs_query_register_offset(const char *name);
-#define MAX_REG_OFFSET (offsetof(struct pt_regs, __last))
+#define MAX_REG_OFFSET (offsetof(struct pt_regs, __last) - sizeof(unsigned long))
 
 /**
  * regs_get_register() - get register value from its offset
diff --git a/arch/loongarch/include/asm/smp.h b/arch/loongarch/include/asm/smp.h
index 3383c9d24e94..3a47f52959a8 100644
--- a/arch/loongarch/include/asm/smp.h
+++ b/arch/loongarch/include/asm/smp.h
@@ -25,6 +25,7 @@ extern int smp_num_siblings;
 extern int num_processors;
 extern int disabled_cpus;
 extern cpumask_t cpu_sibling_map[];
+extern cpumask_t cpu_llc_shared_map[];
 extern cpumask_t cpu_core_map[];
 extern cpumask_t cpu_foreign_map[];
 
@@ -38,7 +39,7 @@ int loongson_cpu_disable(void);
 void loongson_cpu_die(unsigned int cpu);
 #endif
 
-static inline void plat_smp_setup(void)
+static inline void __init plat_smp_setup(void)
 {
 	loongson_smp_setup();
 }
@@ -77,6 +78,8 @@ extern int __cpu_logical_map[NR_CPUS];
 #define SMP_IRQ_WORK		BIT(ACTION_IRQ_WORK)
 #define SMP_CLEAR_VECTOR	BIT(ACTION_CLEAR_VECTOR)
 
+struct seq_file;
+
 struct secondary_data {
 	unsigned long stack;
 	unsigned long thread_info;
diff --git a/arch/loongarch/include/asm/sparsemem.h b/arch/loongarch/include/asm/sparsemem.h
index 8d4af6aff8a8..4501efac1a87 100644
--- a/arch/loongarch/include/asm/sparsemem.h
+++ b/arch/loongarch/include/asm/sparsemem.h
@@ -21,11 +21,6 @@
 #define VMEMMAP_SIZE	0	/* 1, For FLATMEM; 2, For SPARSEMEM without VMEMMAP. */
 #endif
 
-#ifdef CONFIG_MEMORY_HOTPLUG
-int memory_add_physaddr_to_nid(u64 addr);
-#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
-#endif
-
 #define INIT_MEMBLOCK_RESERVED_REGIONS	(INIT_MEMBLOCK_REGIONS + NR_CPUS)
 
 #endif /* _LOONGARCH_SPARSEMEM_H */
diff --git a/arch/loongarch/include/asm/stackframe.h b/arch/loongarch/include/asm/stackframe.h
index 66736837085b..5cb568a60cf8 100644
--- a/arch/loongarch/include/asm/stackframe.h
+++ b/arch/loongarch/include/asm/stackframe.h
@@ -57,6 +57,12 @@
 	jirl	zero, \temp1, 0xc
 	.endm
 
+	.macro STACKLEAK_ERASE
+#ifdef CONFIG_KSTACK_ERASE
+	bl	stackleak_erase_on_task_stack
+#endif
+	.endm
+
 	.macro BACKUP_T0T1
 	csrwr	t0, EXCEPTION_KS0
 	csrwr	t1, EXCEPTION_KS1
diff --git a/arch/loongarch/include/asm/stacktrace.h b/arch/loongarch/include/asm/stacktrace.h
index f23adb15f418..5c8be156567c 100644
--- a/arch/loongarch/include/asm/stacktrace.h
+++ b/arch/loongarch/include/asm/stacktrace.h
@@ -8,6 +8,7 @@
 #include <asm/asm.h>
 #include <asm/ptrace.h>
 #include <asm/loongarch.h>
+#include <asm/unwind_hints.h>
 #include <linux/stringify.h>
 
 enum stack_type {
@@ -30,6 +31,11 @@ bool in_irq_stack(unsigned long stack, struct stack_info *info);
 bool in_task_stack(unsigned long stack, struct task_struct *task, struct stack_info *info);
 int get_stack_info(unsigned long stack, struct task_struct *task, struct stack_info *info);
 
+static __always_inline bool on_thread_stack(void)
+{
+	return !(((unsigned long)(current->stack) ^ current_stack_pointer) & ~(THREAD_SIZE - 1));
+}
+
 #define STR_LONG_L    __stringify(LONG_L)
 #define STR_LONG_S    __stringify(LONG_S)
 #define STR_LONGSIZE  __stringify(LONGSIZE)
@@ -43,6 +49,7 @@ int get_stack_info(unsigned long stack, struct task_struct *task, struct stack_i
 static __always_inline void prepare_frametrace(struct pt_regs *regs)
 {
 	__asm__ __volatile__(
+		UNWIND_HINT_SAVE
 		/* Save $ra */
 		STORE_ONE_REG(1)
 		/* Use $ra to save PC */
@@ -80,6 +87,7 @@ static __always_inline void prepare_frametrace(struct pt_regs *regs)
 		STORE_ONE_REG(29)
 		STORE_ONE_REG(30)
 		STORE_ONE_REG(31)
+		UNWIND_HINT_RESTORE
 		: "=m" (regs->csr_era)
 		: "r" (regs->regs)
 		: "memory");
diff --git a/arch/loongarch/include/asm/syscall.h b/arch/loongarch/include/asm/syscall.h
index e286dc58476e..81d2733f7b94 100644
--- a/arch/loongarch/include/asm/syscall.h
+++ b/arch/loongarch/include/asm/syscall.h
@@ -26,6 +26,13 @@ static inline long syscall_get_nr(struct task_struct *task,
 	return regs->regs[11];
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->regs[11] = nr;
+}
+
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
@@ -61,6 +68,14 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	memcpy(&args[1], &regs->regs[5], 5 * sizeof(long));
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	regs->orig_a0 = args[0];
+	memcpy(&regs->regs[5], &args[1], 5 * sizeof(long));
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	return AUDIT_ARCH_LOONGARCH64;
diff --git a/arch/loongarch/include/asm/thread_info.h b/arch/loongarch/include/asm/thread_info.h
index 4f5a9441754e..4d7117fcdc78 100644
--- a/arch/loongarch/include/asm/thread_info.h
+++ b/arch/loongarch/include/asm/thread_info.h
@@ -10,7 +10,7 @@
 
 #ifdef __KERNEL__
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/processor.h>
 
@@ -53,7 +53,7 @@ static inline struct thread_info *current_thread_info(void)
 
 register unsigned long current_stack_pointer __asm__("$sp");
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* thread information allocation */
 #define THREAD_SIZE		SZ_16K
@@ -65,50 +65,42 @@ register unsigned long current_stack_pointer __asm__("$sp");
  *   access
  * - pending work-to-be-done flags are in LSW
  * - other flags in MSW
+ *
+ * Tell the generic TIF infrastructure which special bits loongarch supports
  */
-#define TIF_NEED_RESCHED	0	/* rescheduling necessary */
-#define TIF_NEED_RESCHED_LAZY	1	/* lazy rescheduling necessary */
-#define TIF_SIGPENDING		2	/* signal pending */
-#define TIF_NOTIFY_RESUME	3	/* callback before returning to user */
-#define TIF_NOTIFY_SIGNAL	4	/* signal notifications exist */
-#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
-#define TIF_NOHZ		6	/* in adaptive nohz mode */
-#define TIF_UPROBE		7	/* breakpointed or singlestepping */
-#define TIF_USEDFPU		8	/* FPU was used by this task this quantum (SMP) */
-#define TIF_USEDSIMD		9	/* SIMD has been used this quantum */
-#define TIF_MEMDIE		10	/* is terminating due to OOM killer */
-#define TIF_FIXADE		11	/* Fix address errors in software */
-#define TIF_LOGADE		12	/* Log address errors to syslog */
-#define TIF_32BIT_REGS		13	/* 32-bit general purpose registers */
-#define TIF_32BIT_ADDR		14	/* 32-bit address space */
-#define TIF_LOAD_WATCH		15	/* If set, load watch registers */
-#define TIF_SINGLESTEP		16	/* Single Step */
-#define TIF_LSX_CTX_LIVE	17	/* LSX context must be preserved */
-#define TIF_LASX_CTX_LIVE	18	/* LASX context must be preserved */
-#define TIF_USEDLBT		19	/* LBT was used by this task this quantum (SMP) */
-#define TIF_LBT_CTX_LIVE	20	/* LBT context must be preserved */
-#define TIF_PATCH_PENDING	21	/* pending live patching update */
+#define HAVE_TIF_NEED_RESCHED_LAZY
+#define HAVE_TIF_RESTORE_SIGMASK
+
+#include <asm-generic/thread_info_tif.h>
+
+/* Architecture specific bits */
+#define TIF_NOHZ		16	/* in adaptive nohz mode */
+#define TIF_USEDFPU		17	/* FPU was used by this task this quantum (SMP) */
+#define TIF_USEDSIMD		18	/* SIMD has been used this quantum */
+#define TIF_FIXADE		19	/* Fix address errors in software */
+#define TIF_LOGADE		20	/* Log address errors to syslog */
+#define TIF_32BIT_REGS		21	/* 32-bit general purpose registers */
+#define TIF_32BIT_ADDR		22	/* 32-bit address space */
+#define TIF_LOAD_WATCH		23	/* If set, load watch registers */
+#define TIF_SINGLESTEP		24	/* Single Step */
+#define TIF_LSX_CTX_LIVE	25	/* LSX context must be preserved */
+#define TIF_LASX_CTX_LIVE	26	/* LASX context must be preserved */
+#define TIF_USEDLBT		27	/* LBT was used by this task this quantum (SMP) */
+#define TIF_LBT_CTX_LIVE	28	/* LBT context must be preserved */
 
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_NEED_RESCHED_LAZY	(1<<TIF_NEED_RESCHED_LAZY)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
-#define _TIF_NOTIFY_SIGNAL	(1<<TIF_NOTIFY_SIGNAL)
-#define _TIF_NOHZ		(1<<TIF_NOHZ)
-#define _TIF_UPROBE		(1<<TIF_UPROBE)
-#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
-#define _TIF_USEDSIMD		(1<<TIF_USEDSIMD)
-#define _TIF_FIXADE		(1<<TIF_FIXADE)
-#define _TIF_LOGADE		(1<<TIF_LOGADE)
-#define _TIF_32BIT_REGS		(1<<TIF_32BIT_REGS)
-#define _TIF_32BIT_ADDR		(1<<TIF_32BIT_ADDR)
-#define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
-#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
-#define _TIF_LSX_CTX_LIVE	(1<<TIF_LSX_CTX_LIVE)
-#define _TIF_LASX_CTX_LIVE	(1<<TIF_LASX_CTX_LIVE)
-#define _TIF_USEDLBT		(1<<TIF_USEDLBT)
-#define _TIF_LBT_CTX_LIVE	(1<<TIF_LBT_CTX_LIVE)
-#define _TIF_PATCH_PENDING	(1<<TIF_PATCH_PENDING)
+#define _TIF_NOHZ		BIT(TIF_NOHZ)
+#define _TIF_USEDFPU		BIT(TIF_USEDFPU)
+#define _TIF_USEDSIMD		BIT(TIF_USEDSIMD)
+#define _TIF_FIXADE		BIT(TIF_FIXADE)
+#define _TIF_LOGADE		BIT(TIF_LOGADE)
+#define _TIF_32BIT_REGS		BIT(TIF_32BIT_REGS)
+#define _TIF_32BIT_ADDR		BIT(TIF_32BIT_ADDR)
+#define _TIF_LOAD_WATCH		BIT(TIF_LOAD_WATCH)
+#define _TIF_SINGLESTEP		BIT(TIF_SINGLESTEP)
+#define _TIF_LSX_CTX_LIVE	BIT(TIF_LSX_CTX_LIVE)
+#define _TIF_LASX_CTX_LIVE	BIT(TIF_LASX_CTX_LIVE)
+#define _TIF_USEDLBT		BIT(TIF_USEDLBT)
+#define _TIF_LBT_CTX_LIVE	BIT(TIF_LBT_CTX_LIVE)
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/loongarch/include/asm/topology.h b/arch/loongarch/include/asm/topology.h
index 50273c9187d0..f06e7ff25bb7 100644
--- a/arch/loongarch/include/asm/topology.h
+++ b/arch/loongarch/include/asm/topology.h
@@ -19,17 +19,22 @@ extern int pcibus_to_node(struct pci_bus *);
 
 #define cpumask_of_pcibus(bus)	(cpu_online_mask)
 
-extern unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES];
-
-void numa_set_distance(int from, int to, int distance);
-
-#define node_distance(from, to)	(node_distances[(from)][(to)])
+int __node_distance(int from, int to);
+#define node_distance(from, to) __node_distance(from, to)
 
 #else
 #define pcibus_to_node(bus)	0
 #endif
 
 #ifdef CONFIG_SMP
+/*
+ * Return cpus that shares the last level cache.
+ */
+static inline const struct cpumask *cpu_coregroup_mask(int cpu)
+{
+	return &cpu_llc_shared_map[cpu];
+}
+
 #define topology_physical_package_id(cpu)	(cpu_data[cpu].package)
 #define topology_core_id(cpu)			(cpu_data[cpu].core)
 #define topology_core_cpumask(cpu)		(&cpu_core_map[cpu])
diff --git a/arch/loongarch/include/asm/types.h b/arch/loongarch/include/asm/types.h
index baf15a0dcf8b..0edd731f3d6a 100644
--- a/arch/loongarch/include/asm/types.h
+++ b/arch/loongarch/include/asm/types.h
@@ -8,7 +8,7 @@
 #include <asm-generic/int-ll64.h>
 #include <uapi/asm/types.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define _ULCAST_
 #define _U64CAST_
 #else
diff --git a/arch/loongarch/include/asm/unwind_hints.h b/arch/loongarch/include/asm/unwind_hints.h
index a01086ad9dde..16c7f7e465a0 100644
--- a/arch/loongarch/include/asm/unwind_hints.h
+++ b/arch/loongarch/include/asm/unwind_hints.h
@@ -5,7 +5,7 @@
 #include <linux/objtool.h>
 #include <asm/orc_types.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 .macro UNWIND_HINT_UNDEFINED
 	UNWIND_HINT type=UNWIND_HINT_TYPE_UNDEFINED
@@ -23,6 +23,14 @@
 	UNWIND_HINT sp_reg=ORC_REG_SP type=UNWIND_HINT_TYPE_CALL
 .endm
 
-#endif /* __ASSEMBLY__ */
+#else /* !__ASSEMBLER__ */
+
+#define UNWIND_HINT_SAVE \
+	UNWIND_HINT(UNWIND_HINT_TYPE_SAVE, 0, 0, 0)
+
+#define UNWIND_HINT_RESTORE \
+	UNWIND_HINT(UNWIND_HINT_TYPE_RESTORE, 0, 0, 0)
+
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_LOONGARCH_UNWIND_HINTS_H */
diff --git a/arch/loongarch/include/asm/uprobes.h b/arch/loongarch/include/asm/uprobes.h
index 99a0d198927f..025fc3f0a102 100644
--- a/arch/loongarch/include/asm/uprobes.h
+++ b/arch/loongarch/include/asm/uprobes.h
@@ -15,7 +15,6 @@ typedef u32 uprobe_opcode_t;
 #define UPROBE_XOLBP_INSN	__emit_break(BRK_UPROBE_XOLBP)
 
 struct arch_uprobe {
-	unsigned long	resume_era;
 	u32	insn[2];
 	u32	ixol[2];
 	bool	simulate;
diff --git a/arch/loongarch/include/asm/vdso.h b/arch/loongarch/include/asm/vdso.h
index d3ba35eb23e7..f72ec79e2dde 100644
--- a/arch/loongarch/include/asm/vdso.h
+++ b/arch/loongarch/include/asm/vdso.h
@@ -31,7 +31,6 @@ struct loongarch_vdso_info {
 	unsigned long size;
 	unsigned long offset_sigreturn;
 	struct vm_special_mapping code_mapping;
-	struct vm_special_mapping data_mapping;
 };
 
 extern struct loongarch_vdso_info vdso_info;
diff --git a/arch/loongarch/include/asm/vdso/arch_data.h b/arch/loongarch/include/asm/vdso/arch_data.h
new file mode 100644
index 000000000000..395ec223bcbe
--- /dev/null
+++ b/arch/loongarch/include/asm/vdso/arch_data.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Author: Huacai Chen <chenhuacai@loongson.cn>
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+
+#ifndef _VDSO_ARCH_DATA_H
+#define _VDSO_ARCH_DATA_H
+
+#ifndef __ASSEMBLER__
+
+#include <asm/asm.h>
+#include <asm/vdso.h>
+
+struct vdso_pcpu_data {
+	u32 node;
+} ____cacheline_aligned_in_smp;
+
+struct vdso_arch_data {
+	struct vdso_pcpu_data pdata[NR_CPUS];
+};
+
+#endif /* __ASSEMBLER__ */
+
+#endif
diff --git a/arch/loongarch/include/asm/vdso/getrandom.h b/arch/loongarch/include/asm/vdso/getrandom.h
index e80f3c4ac748..2ff05003c6e7 100644
--- a/arch/loongarch/include/asm/vdso/getrandom.h
+++ b/arch/loongarch/include/asm/vdso/getrandom.h
@@ -5,7 +5,7 @@
 #ifndef __ASM_VDSO_GETRANDOM_H
 #define __ASM_VDSO_GETRANDOM_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/unistd.h>
 #include <asm/vdso/vdso.h>
@@ -20,7 +20,7 @@ static __always_inline ssize_t getrandom_syscall(void *_buffer, size_t _len, uns
 
 	asm volatile(
 	"      syscall 0\n"
-	: "+r" (ret)
+	: "=r" (ret)
 	: "r" (nr), "r" (buffer), "r" (len), "r" (flags)
 	: "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7", "$t8",
 	  "memory");
@@ -28,11 +28,6 @@ static __always_inline ssize_t getrandom_syscall(void *_buffer, size_t _len, uns
 	return ret;
 }
 
-static __always_inline const struct vdso_rng_data *__arch_get_vdso_rng_data(void)
-{
-	return &_loongarch_data.rng_data;
-}
-
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_GETRANDOM_H */
diff --git a/arch/loongarch/include/asm/vdso/gettimeofday.h b/arch/loongarch/include/asm/vdso/gettimeofday.h
index 7eb3f041af76..dcafabca9bb6 100644
--- a/arch/loongarch/include/asm/vdso/gettimeofday.h
+++ b/arch/loongarch/include/asm/vdso/gettimeofday.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_VDSO_GETTIMEOFDAY_H
 #define __ASM_VDSO_GETTIMEOFDAY_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/unistd.h>
 #include <asm/vdso/vdso.h>
@@ -25,7 +25,7 @@ static __always_inline long gettimeofday_fallback(
 
 	asm volatile(
 	"       syscall 0\n"
-	: "+r" (ret)
+	: "=r" (ret)
 	: "r" (nr), "r" (tv), "r" (tz)
 	: "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7",
 	  "$t8", "memory");
@@ -44,7 +44,7 @@ static __always_inline long clock_gettime_fallback(
 
 	asm volatile(
 	"       syscall 0\n"
-	: "+r" (ret)
+	: "=r" (ret)
 	: "r" (nr), "r" (clkid), "r" (ts)
 	: "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7",
 	  "$t8", "memory");
@@ -63,7 +63,7 @@ static __always_inline int clock_getres_fallback(
 
 	asm volatile(
 	"       syscall 0\n"
-	: "+r" (ret)
+	: "=r" (ret)
 	: "r" (nr), "r" (clkid), "r" (ts)
 	: "$t0", "$t1", "$t2", "$t3", "$t4", "$t5", "$t6", "$t7",
 	  "$t8", "memory");
@@ -72,7 +72,7 @@ static __always_inline int clock_getres_fallback(
 }
 
 static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
-						 const struct vdso_data *vd)
+						 const struct vdso_time_data *vd)
 {
 	uint64_t count;
 
@@ -89,18 +89,6 @@ static inline bool loongarch_vdso_hres_capable(void)
 }
 #define __arch_vdso_hres_capable loongarch_vdso_hres_capable
 
-static __always_inline const struct vdso_data *__arch_get_vdso_data(void)
-{
-	return _vdso_data;
-}
-
-#ifdef CONFIG_TIME_NS
-static __always_inline
-const struct vdso_data *__arch_get_timens_vdso_data(const struct vdso_data *vd)
-{
-	return _timens_data;
-}
-#endif
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/loongarch/include/asm/vdso/processor.h b/arch/loongarch/include/asm/vdso/processor.h
index ef5770b343a0..1e255373b0b8 100644
--- a/arch/loongarch/include/asm/vdso/processor.h
+++ b/arch/loongarch/include/asm/vdso/processor.h
@@ -5,10 +5,10 @@
 #ifndef __ASM_VDSO_PROCESSOR_H
 #define __ASM_VDSO_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define cpu_relax()	barrier()
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_PROCESSOR_H */
diff --git a/arch/loongarch/include/asm/vdso/vdso.h b/arch/loongarch/include/asm/vdso/vdso.h
index 1c183a9b2115..04bd2d452876 100644
--- a/arch/loongarch/include/asm/vdso/vdso.h
+++ b/arch/loongarch/include/asm/vdso/vdso.h
@@ -7,49 +7,15 @@
 #ifndef _ASM_VDSO_VDSO_H
 #define _ASM_VDSO_VDSO_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/asm.h>
 #include <asm/page.h>
 #include <asm/vdso.h>
+#include <vdso/datapage.h>
 
-struct vdso_pcpu_data {
-	u32 node;
-} ____cacheline_aligned_in_smp;
+#define VVAR_SIZE (VDSO_NR_PAGES << PAGE_SHIFT)
 
-struct loongarch_vdso_data {
-	struct vdso_pcpu_data pdata[NR_CPUS];
-	struct vdso_rng_data rng_data;
-};
-
-/*
- * The layout of vvar:
- *
- *                      high
- * +---------------------+--------------------------+
- * | loongarch vdso data | LOONGARCH_VDSO_DATA_SIZE |
- * +---------------------+--------------------------+
- * |  time-ns vdso data  |        PAGE_SIZE         |
- * +---------------------+--------------------------+
- * |  generic vdso data  |        PAGE_SIZE         |
- * +---------------------+--------------------------+
- *                      low
- */
-#define LOONGARCH_VDSO_DATA_SIZE PAGE_ALIGN(sizeof(struct loongarch_vdso_data))
-#define LOONGARCH_VDSO_DATA_PAGES (LOONGARCH_VDSO_DATA_SIZE >> PAGE_SHIFT)
-
-enum vvar_pages {
-	VVAR_GENERIC_PAGE_OFFSET,
-	VVAR_TIMENS_PAGE_OFFSET,
-	VVAR_LOONGARCH_PAGES_START,
-	VVAR_LOONGARCH_PAGES_END = VVAR_LOONGARCH_PAGES_START + LOONGARCH_VDSO_DATA_PAGES - 1,
-	VVAR_NR_PAGES,
-};
-
-#define VVAR_SIZE (VVAR_NR_PAGES << PAGE_SHIFT)
-
-extern struct loongarch_vdso_data _loongarch_data __attribute__((visibility("hidden")));
-
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/loongarch/include/asm/vdso/vsyscall.h b/arch/loongarch/include/asm/vdso/vsyscall.h
index 8987e951d0a9..558eb9dfda52 100644
--- a/arch/loongarch/include/asm/vdso/vsyscall.h
+++ b/arch/loongarch/include/asm/vdso/vsyscall.h
@@ -2,30 +2,13 @@
 #ifndef __ASM_VDSO_VSYSCALL_H
 #define __ASM_VDSO_VSYSCALL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <vdso/datapage.h>
 
-extern struct vdso_data *vdso_data;
-extern struct vdso_rng_data *vdso_rng_data;
-
-static __always_inline
-struct vdso_data *__loongarch_get_k_vdso_data(void)
-{
-	return vdso_data;
-}
-#define __arch_get_k_vdso_data __loongarch_get_k_vdso_data
-
-static __always_inline
-struct vdso_rng_data *__loongarch_get_k_vdso_rng_data(void)
-{
-	return vdso_rng_data;
-}
-#define __arch_get_k_vdso_rng_data __loongarch_get_k_vdso_rng_data
-
 /* The asm-generic header needs to be included after the definitions above */
 #include <asm-generic/vdso/vsyscall.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_VSYSCALL_H */
diff --git a/arch/loongarch/include/uapi/asm/kvm.h b/arch/loongarch/include/uapi/asm/kvm.h
index 5f354f5c6847..de6c3f18e40a 100644
--- a/arch/loongarch/include/uapi/asm/kvm.h
+++ b/arch/loongarch/include/uapi/asm/kvm.h
@@ -103,6 +103,8 @@ struct kvm_fpu {
 #define  KVM_LOONGARCH_VM_FEAT_PMU		5
 #define  KVM_LOONGARCH_VM_FEAT_PV_IPI		6
 #define  KVM_LOONGARCH_VM_FEAT_PV_STEALTIME	7
+#define  KVM_LOONGARCH_VM_FEAT_PTW		8
+#define  KVM_LOONGARCH_VM_FEAT_MSGINT		9
 
 /* Device Control API on vcpu fd */
 #define KVM_LOONGARCH_VCPU_CPUCFG	0
diff --git a/arch/loongarch/include/uapi/asm/kvm_para.h b/arch/loongarch/include/uapi/asm/kvm_para.h
index b0604aa9b4bb..76d802ef01ce 100644
--- a/arch/loongarch/include/uapi/asm/kvm_para.h
+++ b/arch/loongarch/include/uapi/asm/kvm_para.h
@@ -17,5 +17,6 @@
 #define  KVM_FEATURE_STEAL_TIME		2
 /* BIT 24 - 31 are features configurable by user space vmm */
 #define  KVM_FEATURE_VIRT_EXTIOI	24
+#define  KVM_FEATURE_USER_HCALL		25
 
 #endif /* _UAPI_ASM_KVM_PARA_H */
diff --git a/arch/loongarch/include/uapi/asm/ptrace.h b/arch/loongarch/include/uapi/asm/ptrace.h
index ac915f841650..215e0f9e8aa3 100644
--- a/arch/loongarch/include/uapi/asm/ptrace.h
+++ b/arch/loongarch/include/uapi/asm/ptrace.h
@@ -10,10 +10,6 @@
 
 #include <linux/types.h>
 
-#ifndef __KERNEL__
-#include <stdint.h>
-#endif
-
 /*
  * For PTRACE_{POKE,PEEK}USR. 0 - 31 are GPRs,
  * 32 is syscall's original ARG0, 33 is PC, 34 is BADVADDR.
@@ -41,37 +37,47 @@ struct user_pt_regs {
 } __attribute__((aligned(8)));
 
 struct user_fp_state {
-	uint64_t fpr[32];
-	uint64_t fcc;
-	uint32_t fcsr;
+	__u64 fpr[32];
+	__u64 fcc;
+	__u32 fcsr;
 };
 
 struct user_lsx_state {
 	/* 32 registers, 128 bits width per register. */
-	uint64_t vregs[32*2];
+	__u64 vregs[32*2];
 };
 
 struct user_lasx_state {
 	/* 32 registers, 256 bits width per register. */
-	uint64_t vregs[32*4];
+	__u64 vregs[32*4];
 };
 
 struct user_lbt_state {
-	uint64_t scr[4];
-	uint32_t eflags;
-	uint32_t ftop;
+	__u64 scr[4];
+	__u32 eflags;
+	__u32 ftop;
 };
 
 struct user_watch_state {
-	uint64_t dbg_info;
+	__u64 dbg_info;
 	struct {
-		uint64_t    addr;
-		uint64_t    mask;
-		uint32_t    ctrl;
-		uint32_t    pad;
+		__u64    addr;
+		__u64    mask;
+		__u32    ctrl;
+		__u32    pad;
 	} dbg_regs[8];
 };
 
+struct user_watch_state_v2 {
+	__u64 dbg_info;
+	struct {
+		__u64    addr;
+		__u64    mask;
+		__u32    ctrl;
+		__u32    pad;
+	} dbg_regs[14];
+};
+
 #define PTRACE_SYSEMU			0x1f
 #define PTRACE_SYSEMU_SINGLESTEP	0x20
 
diff --git a/arch/loongarch/include/uapi/asm/setup.h b/arch/loongarch/include/uapi/asm/setup.h
new file mode 100644
index 000000000000..d46363ce3e02
--- /dev/null
+++ b/arch/loongarch/include/uapi/asm/setup.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#ifndef _UAPI_ASM_LOONGARCH_SETUP_H
+#define _UAPI_ASM_LOONGARCH_SETUP_H
+
+#define COMMAND_LINE_SIZE	4096
+
+#endif /* _UAPI_ASM_LOONGARCH_SETUP_H */
diff --git a/arch/loongarch/kernel/Makefile b/arch/loongarch/kernel/Makefile
index 9497968ee158..001924877772 100644
--- a/arch/loongarch/kernel/Makefile
+++ b/arch/loongarch/kernel/Makefile
@@ -5,12 +5,12 @@
 
 OBJECT_FILES_NON_STANDARD_head.o := y
 
-extra-y		:= vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 
 obj-y		+= head.o cpu-probe.o cacheinfo.o env.o setup.o entry.o genex.o \
 		   traps.o irq.o idle.o process.o dma.o mem.o reset.o switch.o \
 		   elf.o syscall.o signal.o time.o topology.o inst.o ptrace.o vdso.o \
-		   alternative.o unwind.o
+		   alternative.o kdebugfs.o unwind.o
 
 obj-$(CONFIG_ACPI)		+= acpi.o
 obj-$(CONFIG_EFI) 		+= efi.o
@@ -21,10 +21,10 @@ obj-$(CONFIG_CPU_HAS_LBT)	+= lbt.o
 
 obj-$(CONFIG_ARCH_STRICT_ALIGN)	+= unaligned.o
 
-CFLAGS_module.o		+= $(call cc-option,-Wno-override-init,)
-CFLAGS_syscall.o	+= $(call cc-option,-Wno-override-init,)
-CFLAGS_traps.o		+= $(call cc-option,-Wno-override-init,)
-CFLAGS_perf_event.o	+= $(call cc-option,-Wno-override-init,)
+CFLAGS_module.o		+= $(call cc-disable-warning, override-init)
+CFLAGS_syscall.o	+= $(call cc-disable-warning, override-init)
+CFLAGS_traps.o		+= $(call cc-disable-warning, override-init)
+CFLAGS_perf_event.o	+= $(call cc-disable-warning, override-init)
 
 ifdef CONFIG_FUNCTION_TRACER
   ifndef CONFIG_DYNAMIC_FTRACE
@@ -62,6 +62,7 @@ obj-$(CONFIG_MAGIC_SYSRQ)	+= sysrq.o
 obj-$(CONFIG_RELOCATABLE)	+= relocate.o
 
 obj-$(CONFIG_KEXEC_CORE)	+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KEXEC_FILE)	+= machine_kexec_file.o kexec_efi.o kexec_elf.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 
 obj-$(CONFIG_UNWINDER_GUESS)	+= unwind_guess.o
diff --git a/arch/loongarch/kernel/acpi.c b/arch/loongarch/kernel/acpi.c
index 382a09a7152c..1367ca759468 100644
--- a/arch/loongarch/kernel/acpi.c
+++ b/arch/loongarch/kernel/acpi.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <linux/efi-bgrt.h>
+#include <linux/export.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/memblock.h>
@@ -244,34 +245,6 @@ fdt_earlycon:
 
 #ifdef CONFIG_ACPI_NUMA
 
-static __init int setup_node(int pxm)
-{
-	return acpi_map_pxm_to_node(pxm);
-}
-
-/*
- * Callback for SLIT parsing.  pxm_to_node() returns NUMA_NO_NODE for
- * I/O localities since SRAT does not list them.  I/O localities are
- * not supported at this point.
- */
-unsigned int numa_distance_cnt;
-
-static inline unsigned int get_numa_distances_cnt(struct acpi_table_slit *slit)
-{
-	return slit->locality_count;
-}
-
-void __init numa_set_distance(int from, int to, int distance)
-{
-	if ((u8)distance != distance || (from == to && distance != LOCAL_DISTANCE)) {
-		pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
-				from, to, distance);
-		return;
-	}
-
-	node_distances[from][to] = distance;
-}
-
 /* Callback for Proximity Domain -> CPUID mapping */
 void __init
 acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
@@ -292,7 +265,41 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 		pxm |= (pa->proximity_domain_hi[1] << 16);
 		pxm |= (pa->proximity_domain_hi[2] << 24);
 	}
-	node = setup_node(pxm);
+	node = acpi_map_pxm_to_node(pxm);
+	if (node < 0) {
+		pr_err("SRAT: Too many proximity domains %x\n", pxm);
+		bad_srat();
+		return;
+	}
+
+	if (pa->apic_id >= CONFIG_NR_CPUS) {
+		pr_info("SRAT: PXM %u -> CPU 0x%02x -> Node %u skipped apicid that is too big\n",
+				pxm, pa->apic_id, node);
+		return;
+	}
+
+	early_numa_add_cpu(pa->apic_id, node);
+
+	set_cpuid_to_node(pa->apic_id, node);
+	node_set(node, numa_nodes_parsed);
+	pr_info("SRAT: PXM %u -> CPU 0x%02x -> Node %u\n", pxm, pa->apic_id, node);
+}
+
+void __init
+acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
+{
+	int pxm, node;
+
+	if (srat_disabled())
+		return;
+	if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) {
+		bad_srat();
+		return;
+	}
+	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
+		return;
+	pxm = pa->proximity_domain;
+	node = acpi_map_pxm_to_node(pxm);
 	if (node < 0) {
 		pr_err("SRAT: Too many proximity domains %x\n", pxm);
 		bad_srat();
diff --git a/arch/loongarch/kernel/alternative.c b/arch/loongarch/kernel/alternative.c
index 4ad13847e962..0e0c766df1e3 100644
--- a/arch/loongarch/kernel/alternative.c
+++ b/arch/loongarch/kernel/alternative.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
+#include <linux/export.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <asm/alternative.h>
diff --git a/arch/loongarch/kernel/asm-offsets.c b/arch/loongarch/kernel/asm-offsets.c
index 049c5c3e370c..3017c7157600 100644
--- a/arch/loongarch/kernel/asm-offsets.c
+++ b/arch/loongarch/kernel/asm-offsets.c
@@ -4,6 +4,8 @@
  *
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
+#define COMPILE_OFFSETS
+
 #include <linux/types.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -280,18 +282,6 @@ static void __used output_pbe_defines(void)
 }
 #endif
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-static void __used output_fgraph_ret_regs_defines(void)
-{
-	COMMENT("LoongArch fgraph_ret_regs offsets.");
-	OFFSET(FGRET_REGS_A0, fgraph_ret_regs, regs[0]);
-	OFFSET(FGRET_REGS_A1, fgraph_ret_regs, regs[1]);
-	OFFSET(FGRET_REGS_FP, fgraph_ret_regs, fp);
-	DEFINE(FGRET_REGS_SIZE, sizeof(struct fgraph_ret_regs));
-	BLANK();
-}
-#endif
-
 static void __used output_kvm_defines(void)
 {
 	COMMENT("KVM/LoongArch Specific offsets.");
@@ -308,6 +298,7 @@ static void __used output_kvm_defines(void)
 	OFFSET(KVM_ARCH_HSP, kvm_vcpu_arch, host_sp);
 	OFFSET(KVM_ARCH_HTP, kvm_vcpu_arch, host_tp);
 	OFFSET(KVM_ARCH_HPGD, kvm_vcpu_arch, host_pgd);
+	OFFSET(KVM_ARCH_KVMPGD, kvm_vcpu_arch, kvm_pgd);
 	OFFSET(KVM_ARCH_HANDLE_EXIT, kvm_vcpu_arch, handle_exit);
 	OFFSET(KVM_ARCH_HEENTRY, kvm_vcpu_arch, host_eentry);
 	OFFSET(KVM_ARCH_GEENTRY, kvm_vcpu_arch, guest_eentry);
@@ -327,6 +318,6 @@ static void __used output_vdso_defines(void)
 {
 	COMMENT("LoongArch vDSO offsets.");
 
-	DEFINE(__VVAR_PAGES, VVAR_NR_PAGES);
+	DEFINE(__VDSO_PAGES, VDSO_NR_PAGES);
 	BLANK();
 }
diff --git a/arch/loongarch/kernel/cacheinfo.c b/arch/loongarch/kernel/cacheinfo.c
index c7988f757281..8e231b0d2cd6 100644
--- a/arch/loongarch/kernel/cacheinfo.c
+++ b/arch/loongarch/kernel/cacheinfo.c
@@ -51,6 +51,12 @@ static void cache_cpumap_setup(unsigned int cpu)
 				continue;
 
 			sib_leaf = sib_cpu_ci->info_list + index;
+			/* SMT cores share all caches */
+			if (cpus_are_siblings(i, cpu)) {
+				cpumask_set_cpu(cpu, &sib_leaf->shared_cpu_map);
+				cpumask_set_cpu(i, &this_leaf->shared_cpu_map);
+			}
+			/* Node's cores share shared caches */
 			if (cache_leaves_are_shared(this_leaf, sib_leaf)) {
 				cpumask_set_cpu(cpu, &sib_leaf->shared_cpu_map);
 				cpumask_set_cpu(i, &this_leaf->shared_cpu_map);
diff --git a/arch/loongarch/kernel/cpu-probe.c b/arch/loongarch/kernel/cpu-probe.c
index cbce099037b2..a2060a24b39f 100644
--- a/arch/loongarch/kernel/cpu-probe.c
+++ b/arch/loongarch/kernel/cpu-probe.c
@@ -52,6 +52,48 @@ static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_loongarch *c)
 	c->fpu_mask = ~(fcsr0 ^ fcsr1) & ~mask;
 }
 
+/* simd = -1/0/128/256 */
+static unsigned int simd = -1U;
+
+static int __init cpu_setup_simd(char *str)
+{
+	get_option(&str, &simd);
+	pr_info("Set SIMD width = %u\n", simd);
+
+	return 0;
+}
+
+early_param("simd", cpu_setup_simd);
+
+static int __init cpu_final_simd(void)
+{
+	struct cpuinfo_loongarch *c = &cpu_data[0];
+
+	if (simd < 128) {
+		c->options &= ~LOONGARCH_CPU_LSX;
+		elf_hwcap &= ~HWCAP_LOONGARCH_LSX;
+	}
+
+	if (simd < 256) {
+		c->options &= ~LOONGARCH_CPU_LASX;
+		elf_hwcap &= ~HWCAP_LOONGARCH_LASX;
+	}
+
+	simd = 0;
+
+	if (c->options & LOONGARCH_CPU_LSX)
+		simd = 128;
+
+	if (c->options & LOONGARCH_CPU_LASX)
+		simd = 256;
+
+	pr_info("Final SIMD width = %u\n", simd);
+
+	return 0;
+}
+
+arch_initcall(cpu_final_simd);
+
 static inline void set_elf_platform(int cpu, const char *plat)
 {
 	if (cpu == 0)
@@ -115,6 +157,8 @@ static void cpu_probe_common(struct cpuinfo_loongarch *c)
 		c->options |= LOONGARCH_CPU_TLB;
 	if (config & CPUCFG1_IOCSR)
 		c->options |= LOONGARCH_CPU_IOCSR;
+	if (config & CPUCFG1_MSGINT)
+		c->options |= LOONGARCH_CPU_MSGINT;
 	if (config & CPUCFG1_UAL) {
 		c->options |= LOONGARCH_CPU_UAL;
 		elf_hwcap |= HWCAP_LOONGARCH_UAL;
@@ -134,13 +178,13 @@ static void cpu_probe_common(struct cpuinfo_loongarch *c)
 		elf_hwcap |= HWCAP_LOONGARCH_FPU;
 	}
 #ifdef CONFIG_CPU_HAS_LSX
-	if (config & CPUCFG2_LSX) {
+	if ((config & CPUCFG2_LSX) && (simd >= 128)) {
 		c->options |= LOONGARCH_CPU_LSX;
 		elf_hwcap |= HWCAP_LOONGARCH_LSX;
 	}
 #endif
 #ifdef CONFIG_CPU_HAS_LASX
-	if (config & CPUCFG2_LASX) {
+	if ((config & CPUCFG2_LASX) && (simd >= 256)) {
 		c->options |= LOONGARCH_CPU_LASX;
 		elf_hwcap |= HWCAP_LOONGARCH_LASX;
 	}
@@ -190,6 +234,7 @@ static void cpu_probe_common(struct cpuinfo_loongarch *c)
 	set_cpu_asid_mask(c, asid_mask);
 
 	config = read_csr_prcfg1();
+	c->timerbits = (config & CSR_CONF1_TMRBITS) >> CSR_CONF1_TMRBITS_SHIFT;
 	c->ksave_mask = GENMASK((config & CSR_CONF1_KSNUM) - 1, 0);
 	c->ksave_mask &= ~(EXC_KSAVE_MASK | PERCPU_KSAVE_MASK | KVM_KSAVE_MASK);
 
@@ -232,7 +277,7 @@ static inline void cpu_probe_loongson(struct cpuinfo_loongarch *c, unsigned int
 	uint32_t config;
 	uint64_t *vendor = (void *)(&cpu_full_name[VENDOR_OFFSET]);
 	uint64_t *cpuname = (void *)(&cpu_full_name[CPUNAME_OFFSET]);
-	const char *core_name = "Unknown";
+	const char *core_name = id_to_core_name(c->processor_id);
 
 	switch (BIT(fls(c->isa_level) - 1)) {
 	case LOONGARCH_CPU_ISA_LA32R:
@@ -246,35 +291,23 @@ static inline void cpu_probe_loongson(struct cpuinfo_loongarch *c, unsigned int
 		break;
 	}
 
-	switch (c->processor_id & PRID_SERIES_MASK) {
-	case PRID_SERIES_LA132:
-		core_name = "LA132";
-		break;
-	case PRID_SERIES_LA264:
-		core_name = "LA264";
-		break;
-	case PRID_SERIES_LA364:
-		core_name = "LA364";
-		break;
-	case PRID_SERIES_LA464:
-		core_name = "LA464";
-		break;
-	case PRID_SERIES_LA664:
-		core_name = "LA664";
-		break;
-	}
-
 	pr_info("%s Processor probed (%s Core)\n", __cpu_family[cpu], core_name);
 
-	if (!cpu_has_iocsr)
+	if (!cpu_has_iocsr) {
+		__cpu_full_name[cpu] = "Unknown";
 		return;
-
-	if (!__cpu_full_name[cpu])
-		__cpu_full_name[cpu] = cpu_full_name;
+	}
 
 	*vendor = iocsr_read64(LOONGARCH_IOCSR_VENDOR);
 	*cpuname = iocsr_read64(LOONGARCH_IOCSR_CPUNAME);
 
+	if (!__cpu_full_name[cpu]) {
+		if (((char *)vendor)[0] == 0)
+			__cpu_full_name[cpu] = "Unknown";
+		else
+			__cpu_full_name[cpu] = cpu_full_name;
+	}
+
 	config = iocsr_read32(LOONGARCH_IOCSR_FEATURES);
 	if (config & IOCSRF_CSRIPI)
 		c->options |= LOONGARCH_CPU_CSRIPI;
@@ -288,6 +321,8 @@ static inline void cpu_probe_loongson(struct cpuinfo_loongarch *c, unsigned int
 		c->options |= LOONGARCH_CPU_EIODECODE;
 	if (config & IOCSRF_AVEC)
 		c->options |= LOONGARCH_CPU_AVECINT;
+	if (config & IOCSRF_REDIRECT)
+		c->options |= LOONGARCH_CPU_REDIRECTINT;
 	if (config & IOCSRF_VM)
 		c->options |= LOONGARCH_CPU_HYPERVISOR;
 }
diff --git a/arch/loongarch/kernel/efi-header.S b/arch/loongarch/kernel/efi-header.S
index 5f23b85d78ca..ba0bdbf86aa8 100644
--- a/arch/loongarch/kernel/efi-header.S
+++ b/arch/loongarch/kernel/efi-header.S
@@ -7,7 +7,7 @@
 #include <linux/sizes.h>
 
 	.macro	__EFI_PE_HEADER
-	.long	PE_MAGIC
+	.long	IMAGE_NT_SIGNATURE
 .Lcoff_header:
 	.short	IMAGE_FILE_MACHINE_LOONGARCH64		/* Machine */
 	.short	.Lsection_count				/* NumberOfSections */
@@ -20,7 +20,7 @@
 		IMAGE_FILE_LINE_NUMS_STRIPPED		/* Characteristics */
 
 .Loptional_header:
-	.short	PE_OPT_MAGIC_PE32PLUS			/* PE32+ format */
+	.short	IMAGE_NT_OPTIONAL_HDR64_MAGIC		/* PE32+ format */
 	.byte	0x02					/* MajorLinkerVersion */
 	.byte	0x14					/* MinorLinkerVersion */
 	.long	__inittext_end - .Lefi_header_end	/* SizeOfCode */
diff --git a/arch/loongarch/kernel/efi.c b/arch/loongarch/kernel/efi.c
index 2bf86aeda874..860a3bc030e0 100644
--- a/arch/loongarch/kernel/efi.c
+++ b/arch/loongarch/kernel/efi.c
@@ -95,7 +95,7 @@ static void __init init_screen_info(void)
 	memset(si, 0, sizeof(*si));
 	early_memunmap(si, sizeof(*si));
 
-	memblock_reserve(screen_info.lfb_base, screen_info.lfb_size);
+	memblock_reserve(__screen_info_lfb_base(&screen_info), screen_info.lfb_size);
 }
 
 void __init efi_init(void)
@@ -144,6 +144,18 @@ void __init efi_init(void)
 		if (efi_memmap_init_early(&data) < 0)
 			panic("Unable to map EFI memory map.\n");
 
+		/*
+		 * Reserve the physical memory region occupied by the EFI
+		 * memory map table (header + descriptors). This is crucial
+		 * for kdump, as the kdump kernel relies on this original
+		 * memmap passed by the bootloader. Without reservation,
+		 * this region could be overwritten by the primary kernel.
+		 * Also, set the EFI_PRESERVE_BS_REGIONS flag to indicate that
+		 * critical boot services code/data regions like this are preserved.
+		 */
+		memblock_reserve((phys_addr_t)boot_memmap, sizeof(*tbl) + data.size);
+		set_bit(EFI_PRESERVE_BS_REGIONS, &efi.flags);
+
 		early_memunmap(tbl, sizeof(*tbl));
 	}
 
diff --git a/arch/loongarch/kernel/elf.c b/arch/loongarch/kernel/elf.c
index 0fa81ced28dc..3d98c6aa00db 100644
--- a/arch/loongarch/kernel/elf.c
+++ b/arch/loongarch/kernel/elf.c
@@ -6,7 +6,6 @@
 
 #include <linux/binfmts.h>
 #include <linux/elf.h>
-#include <linux/export.h>
 #include <linux/sched.h>
 
 #include <asm/cpu-features.h>
diff --git a/arch/loongarch/kernel/entry.S b/arch/loongarch/kernel/entry.S
index 48e7e34e355e..47e1db9a1ce4 100644
--- a/arch/loongarch/kernel/entry.S
+++ b/arch/loongarch/kernel/entry.S
@@ -73,28 +73,29 @@ SYM_CODE_START(handle_syscall)
 	move		a0, sp
 	bl		do_syscall
 
+	STACKLEAK_ERASE
 	RESTORE_ALL_AND_RET
 SYM_CODE_END(handle_syscall)
 _ASM_NOKPROBE(handle_syscall)
 
-SYM_CODE_START(ret_from_fork)
+SYM_CODE_START(ret_from_fork_asm)
 	UNWIND_HINT_REGS
-	bl		schedule_tail		# a0 = struct task_struct *prev
-	move		a0, sp
-	bl 		syscall_exit_to_user_mode
+	move		a1, sp
+	bl 		ret_from_fork
+	STACKLEAK_ERASE
 	RESTORE_STATIC
 	RESTORE_SOME
 	RESTORE_SP_AND_RET
-SYM_CODE_END(ret_from_fork)
+SYM_CODE_END(ret_from_fork_asm)
 
-SYM_CODE_START(ret_from_kernel_thread)
+SYM_CODE_START(ret_from_kernel_thread_asm)
 	UNWIND_HINT_REGS
-	bl		schedule_tail		# a0 = struct task_struct *prev
-	move		a0, s1
-	jirl		ra, s0, 0
-	move		a0, sp
-	bl		syscall_exit_to_user_mode
+	move		a1, sp
+	move		a2, s0
+	move		a3, s1
+	bl		ret_from_kernel_thread
+	STACKLEAK_ERASE
 	RESTORE_STATIC
 	RESTORE_SOME
 	RESTORE_SP_AND_RET
-SYM_CODE_END(ret_from_kernel_thread)
+SYM_CODE_END(ret_from_kernel_thread_asm)
diff --git a/arch/loongarch/kernel/env.c b/arch/loongarch/kernel/env.c
index 2f1f5b08638f..23bd5ae2212c 100644
--- a/arch/loongarch/kernel/env.c
+++ b/arch/loongarch/kernel/env.c
@@ -39,16 +39,19 @@ void __init init_environ(void)
 
 static int __init init_cpu_fullname(void)
 {
-	struct device_node *root;
 	int cpu, ret;
-	char *model;
+	char *cpuname;
+	const char *model;
+	struct device_node *root;
 
 	/* Parsing cpuname from DTS model property */
 	root = of_find_node_by_path("/");
-	ret = of_property_read_string(root, "model", (const char **)&model);
+	ret = of_property_read_string(root, "model", &model);
+	if (ret == 0) {
+		cpuname = kstrdup(model, GFP_KERNEL);
+		loongson_sysconf.cpuname = strsep(&cpuname, " ");
+	}
 	of_node_put(root);
-	if (ret == 0)
-		loongson_sysconf.cpuname = strsep(&model, " ");
 
 	if (loongson_sysconf.cpuname && !strncmp(loongson_sysconf.cpuname, "Loongson", 8)) {
 		for (cpu = 0; cpu < NR_CPUS; cpu++)
@@ -68,6 +71,8 @@ static int __init fdt_cpu_clk_init(void)
 		return -ENODEV;
 
 	clk = of_clk_get(np, 0);
+	of_node_put(np);
+
 	if (IS_ERR(clk))
 		return -ENODEV;
 
@@ -81,7 +86,7 @@ late_initcall(fdt_cpu_clk_init);
 static ssize_t boardinfo_show(struct kobject *kobj,
 			      struct kobj_attribute *attr, char *buf)
 {
-	return sprintf(buf,
+	return sysfs_emit(buf,
 		"BIOS Information\n"
 		"Vendor\t\t\t: %s\n"
 		"Version\t\t\t: %s\n"
@@ -104,6 +109,8 @@ static int __init boardinfo_init(void)
 	struct kobject *loongson_kobj;
 
 	loongson_kobj = kobject_create_and_add("loongson", firmware_kobj);
+	if (!loongson_kobj)
+		return -ENOMEM;
 
 	return sysfs_create_file(loongson_kobj, &boardinfo_attr.attr);
 }
diff --git a/arch/loongarch/kernel/fpu.S b/arch/loongarch/kernel/fpu.S
index 6ab640101457..28caf416ae36 100644
--- a/arch/loongarch/kernel/fpu.S
+++ b/arch/loongarch/kernel/fpu.S
@@ -458,6 +458,7 @@ SYM_FUNC_START(_save_fp_context)
 	li.w		a0, 0				# success
 	jr		ra
 SYM_FUNC_END(_save_fp_context)
+EXPORT_SYMBOL_GPL(_save_fp_context)
 
 /*
  * a0: fpregs
@@ -471,6 +472,7 @@ SYM_FUNC_START(_restore_fp_context)
 	li.w		a0, 0				# success
 	jr		ra
 SYM_FUNC_END(_restore_fp_context)
+EXPORT_SYMBOL_GPL(_restore_fp_context)
 
 /*
  * a0: fpregs
@@ -484,6 +486,7 @@ SYM_FUNC_START(_save_lsx_context)
 	li.w	a0, 0					# success
 	jr	ra
 SYM_FUNC_END(_save_lsx_context)
+EXPORT_SYMBOL_GPL(_save_lsx_context)
 
 /*
  * a0: fpregs
@@ -497,6 +500,7 @@ SYM_FUNC_START(_restore_lsx_context)
 	li.w	a0, 0					# success
 	jr	ra
 SYM_FUNC_END(_restore_lsx_context)
+EXPORT_SYMBOL_GPL(_restore_lsx_context)
 
 /*
  * a0: fpregs
@@ -510,6 +514,7 @@ SYM_FUNC_START(_save_lasx_context)
 	li.w	a0, 0					# success
 	jr	ra
 SYM_FUNC_END(_save_lasx_context)
+EXPORT_SYMBOL_GPL(_save_lasx_context)
 
 /*
  * a0: fpregs
@@ -523,6 +528,7 @@ SYM_FUNC_START(_restore_lasx_context)
 	li.w	a0, 0					# success
 	jr	ra
 SYM_FUNC_END(_restore_lasx_context)
+EXPORT_SYMBOL_GPL(_restore_lasx_context)
 
 .L_fpu_fault:
 	li.w	a0, -EFAULT				# failure
diff --git a/arch/loongarch/kernel/ftrace_dyn.c b/arch/loongarch/kernel/ftrace_dyn.c
index 18056229e22e..d5d81d74034c 100644
--- a/arch/loongarch/kernel/ftrace_dyn.c
+++ b/arch/loongarch/kernel/ftrace_dyn.c
@@ -85,14 +85,13 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec, struct module *mod
 	 * dealing with an out-of-range condition, we can assume it
 	 * is due to a module being loaded far away from the kernel.
 	 *
-	 * NOTE: __module_text_address() must be called with preemption
-	 * disabled, but we can rely on ftrace_lock to ensure that 'mod'
+	 * NOTE: __module_text_address() must be called within a RCU read
+	 * section, but we can rely on ftrace_lock to ensure that 'mod'
 	 * retains its validity throughout the remainder of this code.
 	 */
 	if (!mod) {
-		preempt_disable();
-		mod = __module_text_address(pc);
-		preempt_enable();
+		scoped_guard(rcu)
+			mod = __module_text_address(pc);
 	}
 
 	if (WARN_ON(!mod))
@@ -243,8 +242,16 @@ void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
 {
 	struct pt_regs *regs = &arch_ftrace_regs(fregs)->regs;
 	unsigned long *parent = (unsigned long *)&regs->regs[1];
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+	unsigned long old;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	old = *parent;
 
-	prepare_ftrace_return(ip, (unsigned long *)parent);
+	if (!function_graph_enter_regs(old, ip, 0, parent, fregs))
+		*parent = return_hooker;
 }
 #else
 static int ftrace_modify_graph_caller(bool enable)
diff --git a/arch/loongarch/kernel/genex.S b/arch/loongarch/kernel/genex.S
index 86d5d90ebefe..733a7665e434 100644
--- a/arch/loongarch/kernel/genex.S
+++ b/arch/loongarch/kernel/genex.S
@@ -16,30 +16,35 @@
 #include <asm/stackframe.h>
 #include <asm/thread_info.h>
 
+	.section .cpuidle.text, "ax"
 	.align	5
 SYM_FUNC_START(__arch_cpu_idle)
-	/* start of rollback region */
-	LONG_L	t0, tp, TI_FLAGS
-	nop
-	andi	t0, t0, _TIF_NEED_RESCHED
-	bnez	t0, 1f
-	nop
-	nop
-	nop
+	/* start of idle interrupt region */
+	ori	t0, zero, CSR_CRMD_IE
+	/* idle instruction needs irq enabled */
+	csrxchg	t0, t0, LOONGARCH_CSR_CRMD
+	/*
+	 * If an interrupt lands here; between enabling interrupts above and
+	 * going idle on the next instruction, we must *NOT* go idle since the
+	 * interrupt could have set TIF_NEED_RESCHED or caused an timer to need
+	 * reprogramming. Fall through -- see handle_vint() below -- and have
+	 * the idle loop take care of things.
+	 */
 	idle	0
-	/* end of rollback region */
-1:	jr	ra
+	/* end of idle interrupt region */
+idle_exit:
+	jr	ra
 SYM_FUNC_END(__arch_cpu_idle)
+	.previous
 
 SYM_CODE_START(handle_vint)
 	UNWIND_HINT_UNDEFINED
 	BACKUP_T0T1
 	SAVE_ALL
-	la_abs	t1, __arch_cpu_idle
+	la_abs	t1, idle_exit
 	LONG_L	t0, sp, PT_ERA
-	/* 32 byte rollback region */
-	ori	t0, t0, 0x1f
-	xori	t0, t0, 0x1f
+	/* 3 instructions idle interrupt region */
+	ori	t0, t0, 0b1100
 	bne	t0, t1, 1f
 	LONG_S	t0, sp, PT_ERA
 1:	move	a0, sp
diff --git a/arch/loongarch/kernel/head.S b/arch/loongarch/kernel/head.S
index 506a99a5bbc7..e3865e92a917 100644
--- a/arch/loongarch/kernel/head.S
+++ b/arch/loongarch/kernel/head.S
@@ -20,7 +20,7 @@
 	__HEAD
 
 _head:
-	.word	MZ_MAGIC		/* "MZ", MS-DOS header */
+	.word	IMAGE_DOS_SIGNATURE	/* "MZ", MS-DOS header */
 	.org	0x8
 	.dword	_kernel_entry		/* Kernel entry point (physical address) */
 	.dword	_kernel_asize		/* Kernel image effective size */
diff --git a/arch/loongarch/kernel/hw_breakpoint.c b/arch/loongarch/kernel/hw_breakpoint.c
index a6e4b605bfa8..c35f9bf38033 100644
--- a/arch/loongarch/kernel/hw_breakpoint.c
+++ b/arch/loongarch/kernel/hw_breakpoint.c
@@ -51,7 +51,13 @@ int hw_breakpoint_slots(int type)
 	READ_WB_REG_CASE(OFF, 4, REG, T, VAL);		\
 	READ_WB_REG_CASE(OFF, 5, REG, T, VAL);		\
 	READ_WB_REG_CASE(OFF, 6, REG, T, VAL);		\
-	READ_WB_REG_CASE(OFF, 7, REG, T, VAL);
+	READ_WB_REG_CASE(OFF, 7, REG, T, VAL);		\
+	READ_WB_REG_CASE(OFF, 8, REG, T, VAL);		\
+	READ_WB_REG_CASE(OFF, 9, REG, T, VAL);		\
+	READ_WB_REG_CASE(OFF, 10, REG, T, VAL);		\
+	READ_WB_REG_CASE(OFF, 11, REG, T, VAL);		\
+	READ_WB_REG_CASE(OFF, 12, REG, T, VAL);		\
+	READ_WB_REG_CASE(OFF, 13, REG, T, VAL);
 
 #define GEN_WRITE_WB_REG_CASES(OFF, REG, T, VAL)	\
 	WRITE_WB_REG_CASE(OFF, 0, REG, T, VAL);		\
@@ -61,7 +67,13 @@ int hw_breakpoint_slots(int type)
 	WRITE_WB_REG_CASE(OFF, 4, REG, T, VAL);		\
 	WRITE_WB_REG_CASE(OFF, 5, REG, T, VAL);		\
 	WRITE_WB_REG_CASE(OFF, 6, REG, T, VAL);		\
-	WRITE_WB_REG_CASE(OFF, 7, REG, T, VAL);
+	WRITE_WB_REG_CASE(OFF, 7, REG, T, VAL);		\
+	WRITE_WB_REG_CASE(OFF, 8, REG, T, VAL);		\
+	WRITE_WB_REG_CASE(OFF, 9, REG, T, VAL);		\
+	WRITE_WB_REG_CASE(OFF, 10, REG, T, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 11, REG, T, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 12, REG, T, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 13, REG, T, VAL);
 
 static u64 read_wb_reg(int reg, int n, int t)
 {
diff --git a/arch/loongarch/kernel/idle.c b/arch/loongarch/kernel/idle.c
index 0b5dd2faeb90..54b247d8cdb6 100644
--- a/arch/loongarch/kernel/idle.c
+++ b/arch/loongarch/kernel/idle.c
@@ -11,7 +11,6 @@
 
 void __cpuidle arch_cpu_idle(void)
 {
-	raw_local_irq_enable();
-	__arch_cpu_idle(); /* idle instruction needs irq enabled */
+	__arch_cpu_idle();
 	raw_local_irq_disable();
 }
diff --git a/arch/loongarch/kernel/inst.c b/arch/loongarch/kernel/inst.c
index 3050329556d1..bf037f0c6b26 100644
--- a/arch/loongarch/kernel/inst.c
+++ b/arch/loongarch/kernel/inst.c
@@ -4,6 +4,8 @@
  */
 #include <linux/sizes.h>
 #include <linux/uaccess.h>
+#include <linux/set_memory.h>
+#include <linux/stop_machine.h>
 
 #include <asm/cacheflush.h>
 #include <asm/inst.h>
@@ -139,6 +141,9 @@ bool insns_not_supported(union loongarch_instruction insn)
 	case amswapw_op ... ammindbdu_op:
 		pr_notice("atomic memory access instructions are not supported\n");
 		return true;
+	case scq_op:
+		pr_notice("sc.q instruction is not supported\n");
+		return true;
 	}
 
 	switch (insn.reg2i14_format.opcode) {
@@ -150,6 +155,15 @@ bool insns_not_supported(union loongarch_instruction insn)
 		return true;
 	}
 
+	switch (insn.reg2_format.opcode) {
+	case llacqw_op:
+	case llacqd_op:
+	case screlw_op:
+	case screld_op:
+		pr_notice("llacq and screl instructions are not supported\n");
+		return true;
+	}
+
 	switch (insn.reg1i21_format.opcode) {
 	case bceqz_op:
 		pr_notice("bceqz and bcnez instructions are not supported\n");
@@ -218,6 +232,50 @@ int larch_insn_patch_text(void *addr, u32 insn)
 	return ret;
 }
 
+struct insn_copy {
+	void *dst;
+	void *src;
+	size_t len;
+	unsigned int cpu;
+};
+
+static int text_copy_cb(void *data)
+{
+	int ret = 0;
+	struct insn_copy *copy = data;
+
+	if (smp_processor_id() == copy->cpu) {
+		ret = copy_to_kernel_nofault(copy->dst, copy->src, copy->len);
+		if (ret)
+			pr_err("%s: operation failed\n", __func__);
+	}
+
+	flush_icache_range((unsigned long)copy->dst, (unsigned long)copy->dst + copy->len);
+
+	return ret;
+}
+
+int larch_insn_text_copy(void *dst, void *src, size_t len)
+{
+	int ret = 0;
+	size_t start, end;
+	struct insn_copy copy = {
+		.dst = dst,
+		.src = src,
+		.len = len,
+		.cpu = smp_processor_id(),
+	};
+
+	start = round_down((size_t)dst, PAGE_SIZE);
+	end   = round_up((size_t)dst + len, PAGE_SIZE);
+
+	set_memory_rw(start, (end - start) / PAGE_SIZE);
+	ret = stop_machine(text_copy_cb, &copy, cpu_online_mask);
+	set_memory_rox(start, (end - start) / PAGE_SIZE);
+
+	return ret;
+}
+
 u32 larch_insn_gen_nop(void)
 {
 	return INSN_NOP;
@@ -323,6 +381,34 @@ u32 larch_insn_gen_lu52id(enum loongarch_gpr rd, enum loongarch_gpr rj, int imm)
 	return insn.word;
 }
 
+u32 larch_insn_gen_beq(enum loongarch_gpr rd, enum loongarch_gpr rj, int imm)
+{
+	union loongarch_instruction insn;
+
+	if ((imm & 3) || imm < -SZ_128K || imm >= SZ_128K) {
+		pr_warn("The generated beq instruction is out of range.\n");
+		return INSN_BREAK;
+	}
+
+	emit_beq(&insn, rj, rd, imm >> 2);
+
+	return insn.word;
+}
+
+u32 larch_insn_gen_bne(enum loongarch_gpr rd, enum loongarch_gpr rj, int imm)
+{
+	union loongarch_instruction insn;
+
+	if ((imm & 3) || imm < -SZ_128K || imm >= SZ_128K) {
+		pr_warn("The generated bne instruction is out of range.\n");
+		return INSN_BREAK;
+	}
+
+	emit_bne(&insn, rj, rd, imm >> 2);
+
+	return insn.word;
+}
+
 u32 larch_insn_gen_jirl(enum loongarch_gpr rd, enum loongarch_gpr rj, int imm)
 {
 	union loongarch_instruction insn;
@@ -332,7 +418,7 @@ u32 larch_insn_gen_jirl(enum loongarch_gpr rd, enum loongarch_gpr rj, int imm)
 		return INSN_BREAK;
 	}
 
-	emit_jirl(&insn, rj, rd, imm >> 2);
+	emit_jirl(&insn, rd, rj, imm >> 2);
 
 	return insn.word;
 }
diff --git a/arch/loongarch/kernel/kdebugfs.c b/arch/loongarch/kernel/kdebugfs.c
new file mode 100644
index 000000000000..80cf64772399
--- /dev/null
+++ b/arch/loongarch/kernel/kdebugfs.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/debugfs.h>
+#include <linux/kstrtox.h>
+#include <asm/loongarch.h>
+
+struct dentry *arch_debugfs_dir;
+EXPORT_SYMBOL(arch_debugfs_dir);
+
+static int sfb_state, tso_state;
+
+static void set_sfb_state(void *info)
+{
+	int val = *(int *)info << CSR_STFILL_SHIFT;
+
+	csr_xchg32(val, CSR_STFILL, LOONGARCH_CSR_IMPCTL1);
+}
+
+static ssize_t sfb_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+{
+	int s, state;
+	char str[32];
+
+	state = (csr_read32(LOONGARCH_CSR_IMPCTL1) & CSR_STFILL) >> CSR_STFILL_SHIFT;
+
+	s = snprintf(str, sizeof(str), "Boot State: %x\nCurrent State: %x\n", sfb_state, state);
+
+	if (*ppos >= s)
+		return 0;
+
+	s -= *ppos;
+	s = min_t(u32, s, count);
+
+	if (copy_to_user(buf, &str[*ppos], s))
+		return -EFAULT;
+
+	*ppos += s;
+
+	return s;
+}
+
+static ssize_t sfb_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+{
+	int state;
+
+	if (kstrtoint_from_user(buf, count, 10, &state))
+		return -EFAULT;
+
+	switch (state) {
+	case 0: case 1:
+		on_each_cpu(set_sfb_state, &state, 1);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static const struct file_operations sfb_fops = {
+	.read = sfb_read,
+	.write = sfb_write,
+	.open = simple_open,
+	.llseek = default_llseek
+};
+
+#define LDSTORDER_NLD_NST        0x0 /* 000 = No Load No Store */
+#define LDSTORDER_ALD_NST        0x1 /* 001 = All Load No Store */
+#define LDSTORDER_SLD_NST        0x3 /* 011 = Same Load No Store */
+#define LDSTORDER_NLD_AST        0x4 /* 100 = No Load All Store */
+#define LDSTORDER_ALD_AST        0x5 /* 101 = All Load All Store */
+#define LDSTORDER_SLD_AST        0x7 /* 111 = Same Load All Store */
+
+static char *tso_hints[] = {
+	"No Load No Store",
+	"All Load No Store",
+	"Invalid Config",
+	"Same Load No Store",
+	"No Load All Store",
+	"All Load All Store",
+	"Invalid Config",
+	"Same Load All Store"
+};
+
+static void set_tso_state(void *info)
+{
+	int val = *(int *)info << CSR_LDSTORDER_SHIFT;
+
+	csr_xchg32(val, CSR_LDSTORDER_MASK, LOONGARCH_CSR_IMPCTL1);
+}
+
+static ssize_t tso_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+{
+	int s, state;
+	char str[240];
+
+	state = (csr_read32(LOONGARCH_CSR_IMPCTL1) & CSR_LDSTORDER_MASK) >> CSR_LDSTORDER_SHIFT;
+
+	s = snprintf(str, sizeof(str), "Boot State: %d (%s)\n"
+			               "Current State: %d (%s)\n\n"
+				       "Available States:\n"
+				       "0 (%s)\t" "1 (%s)\t" "3 (%s)\n"
+				       "4 (%s)\t" "5 (%s)\t" "7 (%s)\n",
+				       tso_state, tso_hints[tso_state], state, tso_hints[state],
+				       tso_hints[0], tso_hints[1], tso_hints[3], tso_hints[4], tso_hints[5], tso_hints[7]);
+
+	if (*ppos >= s)
+		return 0;
+
+	s -= *ppos;
+	s = min_t(u32, s, count);
+
+	if (copy_to_user(buf, &str[*ppos], s))
+		return -EFAULT;
+
+	*ppos += s;
+
+	return s;
+}
+
+static ssize_t tso_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+{
+	int state;
+
+	if (kstrtoint_from_user(buf, count, 10, &state))
+		return -EFAULT;
+
+	switch (state) {
+	case 0: case 1: case 3:
+	case 4: case 5: case 7:
+		on_each_cpu(set_tso_state, &state, 1);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static const struct file_operations tso_fops = {
+	.read = tso_read,
+	.write = tso_write,
+	.open = simple_open,
+	.llseek = default_llseek
+};
+
+static int __init arch_kdebugfs_init(void)
+{
+	unsigned int config = read_cpucfg(LOONGARCH_CPUCFG3);
+
+	arch_debugfs_dir = debugfs_create_dir("loongarch", NULL);
+
+	if (config & CPUCFG3_SFB) {
+		debugfs_create_file("sfb_state", S_IRUGO | S_IWUSR,
+			    arch_debugfs_dir, &sfb_state, &sfb_fops);
+		sfb_state = (csr_read32(LOONGARCH_CSR_IMPCTL1) & CSR_STFILL) >> CSR_STFILL_SHIFT;
+	}
+
+	if (config & (CPUCFG3_ALDORDER_CAP | CPUCFG3_ASTORDER_CAP)) {
+		debugfs_create_file("tso_state", S_IRUGO | S_IWUSR,
+			    arch_debugfs_dir, &tso_state, &tso_fops);
+		tso_state = (csr_read32(LOONGARCH_CSR_IMPCTL1) & CSR_LDSTORDER_MASK) >> CSR_LDSTORDER_SHIFT;
+	}
+
+	return 0;
+}
+postcore_initcall(arch_kdebugfs_init);
diff --git a/arch/loongarch/kernel/kexec_efi.c b/arch/loongarch/kernel/kexec_efi.c
new file mode 100644
index 000000000000..5ee78ebb1546
--- /dev/null
+++ b/arch/loongarch/kernel/kexec_efi.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Load EFI vmlinux file for the kexec_file_load syscall.
+ *
+ * Author: Youling Tang <tangyouling@kylinos.cn>
+ * Copyright (C) 2025 KylinSoft Corporation.
+ */
+
+#define pr_fmt(fmt)	"kexec_file(EFI): " fmt
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/kexec.h>
+#include <linux/pe.h>
+#include <linux/string.h>
+#include <asm/byteorder.h>
+#include <asm/cpufeature.h>
+#include <asm/image.h>
+
+static int efi_kexec_probe(const char *kernel_buf, unsigned long kernel_len)
+{
+	const struct loongarch_image_header *h = (const struct loongarch_image_header *)kernel_buf;
+
+	if (!h || (kernel_len < sizeof(*h))) {
+		kexec_dprintk("No LoongArch image header.\n");
+		return -EINVAL;
+	}
+
+	if (!loongarch_header_check_dos_sig(h)) {
+		kexec_dprintk("No LoongArch PE image header.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void *efi_kexec_load(struct kimage *image,
+				char *kernel, unsigned long kernel_len,
+				char *initrd, unsigned long initrd_len,
+				char *cmdline, unsigned long cmdline_len)
+{
+	int ret;
+	unsigned long text_offset, kernel_segment_number;
+	struct kexec_buf kbuf = {};
+	struct kexec_segment *kernel_segment;
+	struct loongarch_image_header *h;
+
+	h = (struct loongarch_image_header *)kernel;
+	if (!h->kernel_asize)
+		return ERR_PTR(-EINVAL);
+
+	/*
+	 * Load the kernel
+	 * FIXME: Non-relocatable kernel rejected for kexec_file (require CONFIG_RELOCATABLE)
+	 */
+	kbuf.image = image;
+	kbuf.buf_max = ULONG_MAX;
+	kbuf.top_down = false;
+
+	kbuf.buffer = kernel;
+	kbuf.bufsz = kernel_len;
+	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+	kbuf.memsz = le64_to_cpu(h->kernel_asize);
+	text_offset = le64_to_cpu(h->text_offset);
+	kbuf.buf_min = text_offset;
+	kbuf.buf_align = SZ_2M;
+
+	kernel_segment_number = image->nr_segments;
+
+	/*
+	 * The location of the kernel segment may make it impossible to
+	 * satisfy the other segment requirements, so we try repeatedly
+	 * to find a location that will work.
+	 */
+	while ((ret = kexec_add_buffer(&kbuf)) == 0) {
+		/* Try to load additional data */
+		kernel_segment = &image->segment[kernel_segment_number];
+		ret = load_other_segments(image, kernel_segment->mem,
+					  kernel_segment->memsz, initrd,
+					  initrd_len, cmdline, cmdline_len);
+		if (!ret)
+			break;
+
+		/*
+		 * We couldn't find space for the other segments; erase the
+		 * kernel segment and try the next available hole.
+		 */
+		image->nr_segments -= 1;
+		kbuf.buf_min = kernel_segment->mem + kernel_segment->memsz;
+		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+	}
+
+	if (ret < 0) {
+		pr_err("Could not find any suitable kernel location!");
+		return ERR_PTR(ret);
+	}
+
+	kernel_segment = &image->segment[kernel_segment_number];
+
+	/* Make sure the second kernel jumps to the correct "kernel_entry" */
+	image->start = kernel_segment->mem + h->kernel_entry - text_offset;
+
+	kexec_dprintk("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kernel_segment->mem, kbuf.bufsz, kernel_segment->memsz);
+
+	return NULL;
+}
+
+const struct kexec_file_ops kexec_efi_ops = {
+	.probe = efi_kexec_probe,
+	.load = efi_kexec_load,
+};
diff --git a/arch/loongarch/kernel/kexec_elf.c b/arch/loongarch/kernel/kexec_elf.c
new file mode 100644
index 000000000000..1b6b64744c7f
--- /dev/null
+++ b/arch/loongarch/kernel/kexec_elf.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Load ELF vmlinux file for the kexec_file_load syscall.
+ *
+ * Author: Youling Tang <tangyouling@kylinos.cn>
+ * Copyright (C) 2025 KylinSoft Corporation.
+ */
+
+#define pr_fmt(fmt)	"kexec_file(ELF): " fmt
+
+#include <linux/elf.h>
+#include <linux/kexec.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/memblock.h>
+#include <asm/setup.h>
+
+#define elf_kexec_probe kexec_elf_probe
+
+static int _elf_kexec_load(struct kimage *image,
+			   struct elfhdr *ehdr, struct kexec_elf_info *elf_info,
+			   struct kexec_buf *kbuf, unsigned long *text_offset)
+{
+	int i, ret = -1;
+
+	/* Read in the PT_LOAD segments. */
+	for (i = 0; i < ehdr->e_phnum; i++) {
+		size_t size;
+		const struct elf_phdr *phdr;
+
+		phdr = &elf_info->proghdrs[i];
+		if (phdr->p_type != PT_LOAD)
+			continue;
+
+		size = phdr->p_filesz;
+		if (size > phdr->p_memsz)
+			size = phdr->p_memsz;
+
+		kbuf->buffer = (void *)elf_info->buffer + phdr->p_offset;
+		kbuf->bufsz = size;
+		kbuf->buf_align = phdr->p_align;
+		*text_offset = __pa(phdr->p_paddr);
+		kbuf->buf_min = *text_offset;
+		kbuf->memsz = ALIGN(phdr->p_memsz, SZ_64K);
+		kbuf->mem = KEXEC_BUF_MEM_UNKNOWN;
+		ret = kexec_add_buffer(kbuf);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+static void *elf_kexec_load(struct kimage *image,
+			    char *kernel, unsigned long kernel_len,
+			    char *initrd, unsigned long initrd_len,
+			    char *cmdline, unsigned long cmdline_len)
+{
+	int ret;
+	unsigned long text_offset, kernel_segment_number;
+	struct elfhdr ehdr;
+	struct kexec_buf kbuf = {};
+	struct kexec_elf_info elf_info;
+	struct kexec_segment *kernel_segment;
+
+	ret = kexec_build_elf_info(kernel, kernel_len, &ehdr, &elf_info);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	/*
+	 * Load the kernel
+	 * FIXME: Non-relocatable kernel rejected for kexec_file (require CONFIG_RELOCATABLE)
+	 */
+	kbuf.image = image;
+	kbuf.buf_max = ULONG_MAX;
+	kbuf.top_down = false;
+
+	kernel_segment_number = image->nr_segments;
+
+	ret = _elf_kexec_load(image, &ehdr, &elf_info, &kbuf, &text_offset);
+	if (ret < 0)
+		goto out;
+
+	/* Load additional data */
+	kernel_segment = &image->segment[kernel_segment_number];
+	ret = load_other_segments(image, kernel_segment->mem, kernel_segment->memsz,
+				  initrd, initrd_len, cmdline, cmdline_len);
+	if (ret < 0)
+		goto out;
+
+	/* Make sure the second kernel jumps to the correct "kernel_entry". */
+	image->start = kernel_segment->mem + __pa(ehdr.e_entry) - text_offset;
+
+	kexec_dprintk("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kernel_segment->mem, kbuf.bufsz, kernel_segment->memsz);
+
+out:
+	kexec_free_elf_info(&elf_info);
+	return ret ? ERR_PTR(ret) : NULL;
+}
+
+const struct kexec_file_ops kexec_elf_ops = {
+	.probe = elf_kexec_probe,
+	.load  = elf_kexec_load,
+};
diff --git a/arch/loongarch/kernel/kfpu.c b/arch/loongarch/kernel/kfpu.c
index ec5b28e570c9..141b49bd989c 100644
--- a/arch/loongarch/kernel/kfpu.c
+++ b/arch/loongarch/kernel/kfpu.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/cpu.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <asm/fpu.h>
 #include <asm/smp.h>
@@ -18,11 +19,28 @@ static unsigned int euen_mask = CSR_EUEN_FPEN;
 static DEFINE_PER_CPU(bool, in_kernel_fpu);
 static DEFINE_PER_CPU(unsigned int, euen_current);
 
+static inline void fpregs_lock(void)
+{
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_disable();
+	else
+		local_bh_disable();
+}
+
+static inline void fpregs_unlock(void)
+{
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_enable();
+	else
+		local_bh_enable();
+}
+
 void kernel_fpu_begin(void)
 {
 	unsigned int *euen_curr;
 
-	preempt_disable();
+	if (!irqs_disabled())
+		fpregs_lock();
 
 	WARN_ON(this_cpu_read(in_kernel_fpu));
 
@@ -73,7 +91,8 @@ void kernel_fpu_end(void)
 
 	this_cpu_write(in_kernel_fpu, false);
 
-	preempt_enable();
+	if (!irqs_disabled())
+		fpregs_unlock();
 }
 EXPORT_SYMBOL_GPL(kernel_fpu_end);
 
diff --git a/arch/loongarch/kernel/kgdb.c b/arch/loongarch/kernel/kgdb.c
index 445c452d72a7..7be5b4c0c900 100644
--- a/arch/loongarch/kernel/kgdb.c
+++ b/arch/loongarch/kernel/kgdb.c
@@ -8,6 +8,7 @@
 #include <linux/hw_breakpoint.h>
 #include <linux/kdebug.h>
 #include <linux/kgdb.h>
+#include <linux/objtool.h>
 #include <linux/processor.h>
 #include <linux/ptrace.h>
 #include <linux/sched.h>
@@ -224,13 +225,13 @@ void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
 	regs->csr_era = pc;
 }
 
-void arch_kgdb_breakpoint(void)
+noinline void arch_kgdb_breakpoint(void)
 {
 	__asm__ __volatile__ (			\
 		".globl kgdb_breakinst\n\t"	\
-		"nop\n"				\
 		"kgdb_breakinst:\tbreak 2\n\t"); /* BRK_KDB = 2 */
 }
+STACK_FRAME_NON_STANDARD(arch_kgdb_breakpoint);
 
 /*
  * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
diff --git a/arch/loongarch/kernel/lbt.S b/arch/loongarch/kernel/lbt.S
index 001f061d226a..71678912d24c 100644
--- a/arch/loongarch/kernel/lbt.S
+++ b/arch/loongarch/kernel/lbt.S
@@ -90,6 +90,7 @@ SYM_FUNC_START(_save_lbt_context)
 	li.w		a0, 0			# success
 	jr		ra
 SYM_FUNC_END(_save_lbt_context)
+EXPORT_SYMBOL_GPL(_save_lbt_context)
 
 /*
  * a0: scr
@@ -110,6 +111,7 @@ SYM_FUNC_START(_restore_lbt_context)
 	li.w		a0, 0			# success
 	jr		ra
 SYM_FUNC_END(_restore_lbt_context)
+EXPORT_SYMBOL_GPL(_restore_lbt_context)
 
 /*
  * a0: ftop
@@ -120,6 +122,7 @@ SYM_FUNC_START(_save_ftop_context)
 	li.w		a0, 0			# success
 	jr		ra
 SYM_FUNC_END(_save_ftop_context)
+EXPORT_SYMBOL_GPL(_save_ftop_context)
 
 /*
  * a0: ftop
@@ -150,6 +153,7 @@ SYM_FUNC_START(_restore_ftop_context)
 	li.w		a0, 0			# success
 	jr		ra
 SYM_FUNC_END(_restore_ftop_context)
+EXPORT_SYMBOL_GPL(_restore_ftop_context)
 
 .L_lbt_fault:
 	li.w		a0, -EFAULT		# failure
diff --git a/arch/loongarch/kernel/machine_kexec.c b/arch/loongarch/kernel/machine_kexec.c
index 8ae641dc53bb..d7fafda1d541 100644
--- a/arch/loongarch/kernel/machine_kexec.c
+++ b/arch/loongarch/kernel/machine_kexec.c
@@ -39,49 +39,37 @@ static unsigned long systable_ptr;
 static unsigned long start_addr;
 static unsigned long first_ind_entry;
 
-static void kexec_image_info(const struct kimage *kimage)
-{
-	unsigned long i;
-
-	pr_debug("kexec kimage info:\n");
-	pr_debug("\ttype:        %d\n", kimage->type);
-	pr_debug("\tstart:       %lx\n", kimage->start);
-	pr_debug("\thead:        %lx\n", kimage->head);
-	pr_debug("\tnr_segments: %lu\n", kimage->nr_segments);
-
-	for (i = 0; i < kimage->nr_segments; i++) {
-		pr_debug("\t    segment[%lu]: %016lx - %016lx", i,
-			kimage->segment[i].mem,
-			kimage->segment[i].mem + kimage->segment[i].memsz);
-		pr_debug("\t\t0x%lx bytes, %lu pages\n",
-			(unsigned long)kimage->segment[i].memsz,
-			(unsigned long)kimage->segment[i].memsz /  PAGE_SIZE);
-	}
-}
-
 int machine_kexec_prepare(struct kimage *kimage)
 {
 	int i;
 	char *bootloader = "kexec";
 	void *cmdline_ptr = (void *)KEXEC_CMDLINE_ADDR;
 
-	kexec_image_info(kimage);
-
 	kimage->arch.efi_boot = fw_arg0;
 	kimage->arch.systable_ptr = fw_arg2;
 
-	/* Find the command line */
-	for (i = 0; i < kimage->nr_segments; i++) {
-		if (!strncmp(bootloader, (char __user *)kimage->segment[i].buf, strlen(bootloader))) {
-			if (!copy_from_user(cmdline_ptr, kimage->segment[i].buf, COMMAND_LINE_SIZE))
-				kimage->arch.cmdline_ptr = (unsigned long)cmdline_ptr;
-			break;
+	if (kimage->file_mode == 1) {
+		/*
+		 * kimage->cmdline_buf will be released in kexec_file_load, so copy
+		 * to the KEXEC_CMDLINE_ADDR safe area.
+		 */
+		memcpy((void *)KEXEC_CMDLINE_ADDR, (void *)kimage->arch.cmdline_ptr,
+					strlen((char *)kimage->arch.cmdline_ptr) + 1);
+		kimage->arch.cmdline_ptr = (unsigned long)KEXEC_CMDLINE_ADDR;
+	} else {
+		/* Find the command line */
+		for (i = 0; i < kimage->nr_segments; i++) {
+			if (!strncmp(bootloader, (char __user *)kimage->segment[i].buf, strlen(bootloader))) {
+				if (!copy_from_user(cmdline_ptr, kimage->segment[i].buf, COMMAND_LINE_SIZE))
+					kimage->arch.cmdline_ptr = (unsigned long)cmdline_ptr;
+				break;
+			}
 		}
-	}
 
-	if (!kimage->arch.cmdline_ptr) {
-		pr_err("Command line not included in the provided image\n");
-		return -EINVAL;
+		if (!kimage->arch.cmdline_ptr) {
+			pr_err("Command line not included in the provided image\n");
+			return -EINVAL;
+		}
 	}
 
 	/* kexec/kdump need a safe page to save reboot_code_buffer */
@@ -126,14 +114,14 @@ void kexec_reboot(void)
 	/* All secondary cpus go to kexec_smp_wait */
 	if (smp_processor_id() > 0) {
 		relocated_kexec_smp_wait(NULL);
-		unreachable();
+		BUG();
 	}
 #endif
 
 	do_kexec = (void *)reboot_code_buffer;
 	do_kexec(efi_boot, cmdline_ptr, systable_ptr, start_addr, first_ind_entry);
 
-	unreachable();
+	BUG();
 }
 
 
@@ -249,6 +237,7 @@ void machine_crash_shutdown(struct pt_regs *regs)
 #ifdef CONFIG_SMP
 	crash_smp_send_stop();
 #endif
+	machine_kexec_mask_interrupts();
 	cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
 
 	pr_info("Starting crashdump kernel...\n");
@@ -286,10 +275,12 @@ void machine_kexec(struct kimage *image)
 
 	/* We do not want to be bothered. */
 	local_irq_disable();
+	machine_kexec_mask_interrupts();
 
-	pr_notice("EFI boot flag 0x%lx\n", efi_boot);
-	pr_notice("Command line at 0x%lx\n", cmdline_ptr);
-	pr_notice("System table at 0x%lx\n", systable_ptr);
+	pr_notice("EFI boot flag: 0x%lx\n", efi_boot);
+	pr_notice("Command line addr: 0x%lx\n", cmdline_ptr);
+	pr_notice("Command line string: %s\n", (char *)cmdline_ptr);
+	pr_notice("System table addr: 0x%lx\n", systable_ptr);
 	pr_notice("We will call new kernel at 0x%lx\n", start_addr);
 	pr_notice("Bye ...\n");
 
diff --git a/arch/loongarch/kernel/machine_kexec_file.c b/arch/loongarch/kernel/machine_kexec_file.c
new file mode 100644
index 000000000000..fb57026f5f25
--- /dev/null
+++ b/arch/loongarch/kernel/machine_kexec_file.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kexec_file for LoongArch
+ *
+ * Author: Youling Tang <tangyouling@kylinos.cn>
+ * Copyright (C) 2025 KylinSoft Corporation.
+ *
+ * Most code is derived from LoongArch port of kexec-tools
+ */
+
+#define pr_fmt(fmt) "kexec_file: " fmt
+
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/kexec.h>
+#include <linux/memblock.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <asm/bootinfo.h>
+
+const struct kexec_file_ops * const kexec_file_loaders[] = {
+	&kexec_efi_ops,
+	&kexec_elf_ops,
+	NULL
+};
+
+int arch_kimage_file_post_load_cleanup(struct kimage *image)
+{
+	vfree(image->elf_headers);
+	image->elf_headers = NULL;
+	image->elf_headers_sz = 0;
+
+	return kexec_image_post_load_cleanup_default(image);
+}
+
+/* Add the "kexec_file" command line parameter to command line. */
+static void cmdline_add_loader(unsigned long *cmdline_tmplen, char *modified_cmdline)
+{
+	int loader_strlen;
+
+	loader_strlen = sprintf(modified_cmdline + (*cmdline_tmplen), "kexec_file ");
+	*cmdline_tmplen += loader_strlen;
+}
+
+/* Add the "initrd=start,size" command line parameter to command line. */
+static void cmdline_add_initrd(struct kimage *image, unsigned long *cmdline_tmplen,
+				char *modified_cmdline, unsigned long initrd)
+{
+	int initrd_strlen;
+
+	initrd_strlen = sprintf(modified_cmdline + (*cmdline_tmplen), "initrd=0x%lx,0x%lx ",
+		initrd, image->initrd_buf_len);
+	*cmdline_tmplen += initrd_strlen;
+}
+
+#ifdef CONFIG_CRASH_DUMP
+
+static int prepare_elf_headers(void **addr, unsigned long *sz)
+{
+	int ret, nr_ranges;
+	uint64_t i;
+	phys_addr_t start, end;
+	struct crash_mem *cmem;
+
+	nr_ranges = 2; /* for exclusion of crashkernel region */
+	for_each_mem_range(i, &start, &end)
+		nr_ranges++;
+
+	cmem = kmalloc(struct_size(cmem, ranges, nr_ranges), GFP_KERNEL);
+	if (!cmem)
+		return -ENOMEM;
+
+	cmem->max_nr_ranges = nr_ranges;
+	cmem->nr_ranges = 0;
+	for_each_mem_range(i, &start, &end) {
+		cmem->ranges[cmem->nr_ranges].start = start;
+		cmem->ranges[cmem->nr_ranges].end = end - 1;
+		cmem->nr_ranges++;
+	}
+
+	/* Exclude crashkernel region */
+	ret = crash_exclude_mem_range(cmem, crashk_res.start, crashk_res.end);
+	if (ret < 0)
+		goto out;
+
+	if (crashk_low_res.end) {
+		ret = crash_exclude_mem_range(cmem, crashk_low_res.start, crashk_low_res.end);
+		if (ret < 0)
+			goto out;
+	}
+
+	ret = crash_prepare_elf64_headers(cmem, true, addr, sz);
+
+out:
+	kfree(cmem);
+	return ret;
+}
+
+/*
+ * Add the "mem=size@start" command line parameter to command line, indicating the
+ * memory region the new kernel can use to boot into.
+ */
+static void cmdline_add_mem(unsigned long *cmdline_tmplen, char *modified_cmdline)
+{
+	int mem_strlen = 0;
+
+	mem_strlen = sprintf(modified_cmdline + (*cmdline_tmplen), "mem=0x%llx@0x%llx ",
+		crashk_res.end - crashk_res.start + 1, crashk_res.start);
+	*cmdline_tmplen += mem_strlen;
+
+	if (crashk_low_res.end) {
+		mem_strlen = sprintf(modified_cmdline + (*cmdline_tmplen), "mem=0x%llx@0x%llx ",
+			crashk_low_res.end - crashk_low_res.start + 1, crashk_low_res.start);
+		*cmdline_tmplen += mem_strlen;
+	}
+}
+
+/* Add the "elfcorehdr=size@start" command line parameter to command line. */
+static void cmdline_add_elfcorehdr(struct kimage *image, unsigned long *cmdline_tmplen,
+				   char *modified_cmdline, unsigned long elfcorehdr_sz)
+{
+	int elfcorehdr_strlen = 0;
+
+	elfcorehdr_strlen = sprintf(modified_cmdline + (*cmdline_tmplen), "elfcorehdr=0x%lx@0x%lx ",
+		elfcorehdr_sz, image->elf_load_addr);
+	*cmdline_tmplen += elfcorehdr_strlen;
+}
+
+#endif
+
+/*
+ * Try to add the initrd to the image. If it is not possible to find valid
+ * locations, this function will undo changes to the image and return non zero.
+ */
+int load_other_segments(struct kimage *image,
+			unsigned long kernel_load_addr, unsigned long kernel_size,
+			char *initrd, unsigned long initrd_len, char *cmdline, unsigned long cmdline_len)
+{
+	int ret = 0;
+	unsigned long cmdline_tmplen = 0;
+	unsigned long initrd_load_addr = 0;
+	unsigned long orig_segments = image->nr_segments;
+	char *modified_cmdline = NULL;
+	struct kexec_buf kbuf = {};
+
+	kbuf.image = image;
+	/* Don't allocate anything below the kernel */
+	kbuf.buf_min = kernel_load_addr + kernel_size;
+
+	modified_cmdline = kzalloc(COMMAND_LINE_SIZE, GFP_KERNEL);
+	if (!modified_cmdline)
+		return -EINVAL;
+
+	cmdline_add_loader(&cmdline_tmplen, modified_cmdline);
+	/* Ensure it's null terminated */
+	modified_cmdline[COMMAND_LINE_SIZE - 1] = '\0';
+
+#ifdef CONFIG_CRASH_DUMP
+	/* Load elf core header */
+	if (image->type == KEXEC_TYPE_CRASH) {
+		void *headers;
+		unsigned long headers_sz;
+
+		ret = prepare_elf_headers(&headers, &headers_sz);
+		if (ret < 0) {
+			pr_err("Preparing elf core header failed\n");
+			goto out_err;
+		}
+
+		kbuf.buffer = headers;
+		kbuf.bufsz = headers_sz;
+		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+		kbuf.memsz = headers_sz;
+		kbuf.buf_align = SZ_64K; /* largest supported page size */
+		kbuf.buf_max = ULONG_MAX;
+		kbuf.top_down = true;
+
+		ret = kexec_add_buffer(&kbuf);
+		if (ret < 0) {
+			vfree(headers);
+			goto out_err;
+		}
+		image->elf_headers = headers;
+		image->elf_load_addr = kbuf.mem;
+		image->elf_headers_sz = headers_sz;
+
+		kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
+
+		/* Add the mem=size@start parameter to the command line */
+		cmdline_add_mem(&cmdline_tmplen, modified_cmdline);
+
+		/* Add the elfcorehdr=size@start parameter to the command line */
+		cmdline_add_elfcorehdr(image, &cmdline_tmplen, modified_cmdline, headers_sz);
+	}
+#endif
+
+	/* Load initrd */
+	if (initrd) {
+		kbuf.buffer = initrd;
+		kbuf.bufsz = initrd_len;
+		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+		kbuf.memsz = initrd_len;
+		kbuf.buf_align = 0;
+		/* within 1GB-aligned window of up to 32GB in size */
+		kbuf.buf_max = round_down(kernel_load_addr, SZ_1G) + (unsigned long)SZ_1G * 32;
+		kbuf.top_down = false;
+
+		ret = kexec_add_buffer(&kbuf);
+		if (ret < 0)
+			goto out_err;
+		initrd_load_addr = kbuf.mem;
+
+		kexec_dprintk("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      initrd_load_addr, kbuf.bufsz, kbuf.memsz);
+
+		/* Add the initrd=start,size parameter to the command line */
+		cmdline_add_initrd(image, &cmdline_tmplen, modified_cmdline, initrd_load_addr);
+	}
+
+	if (cmdline_len + cmdline_tmplen > COMMAND_LINE_SIZE) {
+		pr_err("Appending command line exceeds COMMAND_LINE_SIZE\n");
+		ret = -EINVAL;
+		goto out_err;
+	}
+
+	memcpy(modified_cmdline + cmdline_tmplen, cmdline, cmdline_len);
+	cmdline = modified_cmdline;
+	image->arch.cmdline_ptr = (unsigned long)cmdline;
+
+	return 0;
+
+out_err:
+	image->nr_segments = orig_segments;
+	kfree(modified_cmdline);
+	return ret;
+}
diff --git a/arch/loongarch/kernel/mcount.S b/arch/loongarch/kernel/mcount.S
index 3015896016a0..b6850503e061 100644
--- a/arch/loongarch/kernel/mcount.S
+++ b/arch/loongarch/kernel/mcount.S
@@ -79,10 +79,11 @@ SYM_FUNC_START(ftrace_graph_caller)
 SYM_FUNC_END(ftrace_graph_caller)
 
 SYM_FUNC_START(return_to_handler)
-	PTR_ADDI	sp, sp, -FGRET_REGS_SIZE
-	PTR_S		a0, sp, FGRET_REGS_A0
-	PTR_S		a1, sp, FGRET_REGS_A1
-	PTR_S		zero, sp, FGRET_REGS_FP
+	/* Save return value regs */
+	PTR_ADDI	sp, sp, -PT_SIZE
+	PTR_S		a0, sp, PT_R4
+	PTR_S		a1, sp, PT_R5
+	PTR_S		zero, sp, PT_R22
 
 	move		a0, sp
 	bl		ftrace_return_to_handler
@@ -90,9 +91,11 @@ SYM_FUNC_START(return_to_handler)
 	/* Restore the real parent address: a0 -> ra */
 	move		ra, a0
 
-	PTR_L		a0, sp, FGRET_REGS_A0
-	PTR_L		a1, sp, FGRET_REGS_A1
-	PTR_ADDI	sp, sp, FGRET_REGS_SIZE
+	/* Restore return value regs */
+	PTR_L		a0, sp, PT_R4
+	PTR_L		a1, sp, PT_R5
+	PTR_ADDI	sp, sp, PT_SIZE
+
 	jr		ra
 SYM_FUNC_END(return_to_handler)
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/loongarch/kernel/mcount_dyn.S b/arch/loongarch/kernel/mcount_dyn.S
index 0c65cf09110c..d6b474ad1d5e 100644
--- a/arch/loongarch/kernel/mcount_dyn.S
+++ b/arch/loongarch/kernel/mcount_dyn.S
@@ -140,19 +140,19 @@ SYM_CODE_END(ftrace_graph_caller)
 SYM_CODE_START(return_to_handler)
 	UNWIND_HINT_UNDEFINED
 	/* Save return value regs */
-	PTR_ADDI	sp, sp, -FGRET_REGS_SIZE
-	PTR_S		a0, sp, FGRET_REGS_A0
-	PTR_S		a1, sp, FGRET_REGS_A1
-	PTR_S		zero, sp, FGRET_REGS_FP
+	PTR_ADDI	sp, sp, -PT_SIZE
+	PTR_S		a0, sp, PT_R4
+	PTR_S		a1, sp, PT_R5
+	PTR_S		zero, sp, PT_R22
 
 	move		a0, sp
 	bl		ftrace_return_to_handler
 	move		ra, a0
 
 	/* Restore return value regs */
-	PTR_L		a0, sp, FGRET_REGS_A0
-	PTR_L		a1, sp, FGRET_REGS_A1
-	PTR_ADDI	sp, sp, FGRET_REGS_SIZE
+	PTR_L		a0, sp, PT_R4
+	PTR_L		a1, sp, PT_R5
+	PTR_ADDI	sp, sp, PT_SIZE
 
 	jr		ra
 SYM_CODE_END(return_to_handler)
diff --git a/arch/loongarch/kernel/mem.c b/arch/loongarch/kernel/mem.c
index aed901c57fb4..8ab1ffedc52c 100644
--- a/arch/loongarch/kernel/mem.c
+++ b/arch/loongarch/kernel/mem.c
@@ -13,7 +13,7 @@
 void __init memblock_init(void)
 {
 	u32 mem_type;
-	u64 mem_start, mem_end, mem_size;
+	u64 mem_start, mem_size;
 	efi_memory_desc_t *md;
 
 	/* Parse memory information */
@@ -21,7 +21,6 @@ void __init memblock_init(void)
 		mem_type = md->type;
 		mem_start = md->phys_addr;
 		mem_size = md->num_pages << EFI_PAGE_SHIFT;
-		mem_end = mem_start + mem_size;
 
 		switch (mem_type) {
 		case EFI_LOADER_CODE:
@@ -31,8 +30,6 @@ void __init memblock_init(void)
 		case EFI_PERSISTENT_MEMORY:
 		case EFI_CONVENTIONAL_MEMORY:
 			memblock_add(mem_start, mem_size);
-			if (max_low_pfn < (mem_end >> PAGE_SHIFT))
-				max_low_pfn = mem_end >> PAGE_SHIFT;
 			break;
 		case EFI_PAL_CODE:
 		case EFI_UNUSABLE_MEMORY:
@@ -49,6 +46,8 @@ void __init memblock_init(void)
 		}
 	}
 
+	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn);
 	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
 
 	/* Reserve the first 2MB */
diff --git a/arch/loongarch/kernel/module-sections.c b/arch/loongarch/kernel/module-sections.c
index e2f30ff9afde..a43ba7f9f987 100644
--- a/arch/loongarch/kernel/module-sections.c
+++ b/arch/loongarch/kernel/module-sections.c
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <linux/moduleloader.h>
 #include <linux/ftrace.h>
+#include <linux/sort.h>
 
 Elf_Addr module_emit_got_entry(struct module *mod, Elf_Shdr *sechdrs, Elf_Addr val)
 {
@@ -61,39 +62,38 @@ Elf_Addr module_emit_plt_entry(struct module *mod, Elf_Shdr *sechdrs, Elf_Addr v
 	return (Elf_Addr)&plt[nr];
 }
 
-static int is_rela_equal(const Elf_Rela *x, const Elf_Rela *y)
-{
-	return x->r_info == y->r_info && x->r_addend == y->r_addend;
-}
+#define cmp_3way(a, b)  ((a) < (b) ? -1 : (a) > (b))
 
-static bool duplicate_rela(const Elf_Rela *rela, int idx)
+static int compare_rela(const void *x, const void *y)
 {
-	int i;
+	int ret;
+	const Elf_Rela *rela_x = x, *rela_y = y;
 
-	for (i = 0; i < idx; i++) {
-		if (is_rela_equal(&rela[i], &rela[idx]))
-			return true;
-	}
+	ret = cmp_3way(rela_x->r_info, rela_y->r_info);
+	if (ret == 0)
+		ret = cmp_3way(rela_x->r_addend, rela_y->r_addend);
 
-	return false;
+	return ret;
 }
 
 static void count_max_entries(Elf_Rela *relas, int num,
 			      unsigned int *plts, unsigned int *gots)
 {
-	unsigned int i, type;
+	unsigned int i;
+
+	sort(relas, num, sizeof(Elf_Rela), compare_rela, NULL);
 
 	for (i = 0; i < num; i++) {
-		type = ELF_R_TYPE(relas[i].r_info);
-		switch (type) {
+		if (i && !compare_rela(&relas[i-1], &relas[i]))
+			continue;
+
+		switch (ELF_R_TYPE(relas[i].r_info)) {
 		case R_LARCH_SOP_PUSH_PLT_PCREL:
 		case R_LARCH_B26:
-			if (!duplicate_rela(relas, i))
-				(*plts)++;
+			(*plts)++;
 			break;
 		case R_LARCH_GOT_PC_HI20:
-			if (!duplicate_rela(relas, i))
-				(*gots)++;
+			(*gots)++;
 			break;
 		default:
 			break; /* Do nothing. */
diff --git a/arch/loongarch/kernel/numa.c b/arch/loongarch/kernel/numa.c
index 84fe7f854820..8b89898e20df 100644
--- a/arch/loongarch/kernel/numa.c
+++ b/arch/loongarch/kernel/numa.c
@@ -11,6 +11,7 @@
 #include <linux/mmzone.h>
 #include <linux/export.h>
 #include <linux/nodemask.h>
+#include <linux/numa_memblks.h>
 #include <linux/swap.h>
 #include <linux/memblock.h>
 #include <linux/pfn.h>
@@ -27,10 +28,6 @@
 #include <asm/time.h>
 
 int numa_off;
-unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES];
-EXPORT_SYMBOL(node_distances);
-
-static struct numa_meminfo numa_meminfo;
 cpumask_t cpus_on_node[MAX_NUMNODES];
 cpumask_t phys_cpus_on_node[MAX_NUMNODES];
 EXPORT_SYMBOL(cpus_on_node);
@@ -43,8 +40,6 @@ s16 __cpuid_to_node[CONFIG_NR_CPUS] = {
 };
 EXPORT_SYMBOL(__cpuid_to_node);
 
-nodemask_t numa_nodes_parsed __initdata;
-
 #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(__per_cpu_offset);
@@ -145,48 +140,6 @@ void numa_remove_cpu(unsigned int cpu)
 	cpumask_clear_cpu(cpu, &cpus_on_node[nid]);
 }
 
-static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
-				     struct numa_meminfo *mi)
-{
-	/* ignore zero length blks */
-	if (start == end)
-		return 0;
-
-	/* whine about and ignore invalid blks */
-	if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
-		pr_warn("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
-			   nid, start, end - 1);
-		return 0;
-	}
-
-	if (mi->nr_blks >= NR_NODE_MEMBLKS) {
-		pr_err("NUMA: too many memblk ranges\n");
-		return -EINVAL;
-	}
-
-	mi->blk[mi->nr_blks].start = PFN_ALIGN(start);
-	mi->blk[mi->nr_blks].end = PFN_ALIGN(end - PAGE_SIZE + 1);
-	mi->blk[mi->nr_blks].nid = nid;
-	mi->nr_blks++;
-	return 0;
-}
-
-/**
- * numa_add_memblk - Add one numa_memblk to numa_meminfo
- * @nid: NUMA node ID of the new memblk
- * @start: Start address of the new memblk
- * @end: End address of the new memblk
- *
- * Add a new memblk to the default numa_meminfo.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-int __init numa_add_memblk(int nid, u64 start, u64 end)
-{
-	return numa_add_memblk_to(nid, start, end, &numa_meminfo);
-}
-
 static void __init node_mem_init(unsigned int node)
 {
 	unsigned long start_pfn, end_pfn;
@@ -205,54 +158,9 @@ static void __init node_mem_init(unsigned int node)
 
 #ifdef CONFIG_ACPI_NUMA
 
-static void __init add_node_intersection(u32 node, u64 start, u64 size, u32 type)
-{
-	static unsigned long num_physpages;
-
-	num_physpages += (size >> PAGE_SHIFT);
-	pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
-		node, type, start, size);
-	pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
-		start >> PAGE_SHIFT, (start + size) >> PAGE_SHIFT, num_physpages);
-	memblock_set_node(start, size, &memblock.memory, node);
-}
+static unsigned long num_physpages;
 
-/*
- * add_numamem_region
- *
- * Add a uasable memory region described by BIOS. The
- * routine gets each intersection between BIOS's region
- * and node's region, and adds them into node's memblock
- * pool.
- *
- */
-static void __init add_numamem_region(u64 start, u64 end, u32 type)
-{
-	u32 i;
-	u64 ofs = start;
-
-	if (start >= end) {
-		pr_debug("Invalid region: %016llx-%016llx\n", start, end);
-		return;
-	}
-
-	for (i = 0; i < numa_meminfo.nr_blks; i++) {
-		struct numa_memblk *mb = &numa_meminfo.blk[i];
-
-		if (ofs > mb->end)
-			continue;
-
-		if (end > mb->end) {
-			add_node_intersection(mb->nid, ofs, mb->end - ofs, type);
-			ofs = mb->end;
-		} else {
-			add_node_intersection(mb->nid, ofs, end - ofs, type);
-			break;
-		}
-	}
-}
-
-static void __init init_node_memblock(void)
+static void __init info_node_memblock(void)
 {
 	u32 mem_type;
 	u64 mem_end, mem_start, mem_size;
@@ -272,12 +180,20 @@ static void __init init_node_memblock(void)
 		case EFI_BOOT_SERVICES_DATA:
 		case EFI_PERSISTENT_MEMORY:
 		case EFI_CONVENTIONAL_MEMORY:
-			add_numamem_region(mem_start, mem_end, mem_type);
+			num_physpages += (mem_size >> PAGE_SHIFT);
+			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
+				(u32)pa_to_nid(mem_start), mem_type, mem_start, mem_size);
+			pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+				mem_start >> PAGE_SHIFT, mem_end >> PAGE_SHIFT, num_physpages);
 			break;
 		case EFI_PAL_CODE:
 		case EFI_UNUSABLE_MEMORY:
 		case EFI_ACPI_RECLAIM_MEMORY:
-			add_numamem_region(mem_start, mem_end, mem_type);
+			num_physpages += (mem_size >> PAGE_SHIFT);
+			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n",
+				(u32)pa_to_nid(mem_start), mem_type, mem_start, mem_size);
+			pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+				mem_start >> PAGE_SHIFT, mem_end >> PAGE_SHIFT, num_physpages);
 			fallthrough;
 		case EFI_RESERVED_TYPE:
 		case EFI_RUNTIME_SERVICES_CODE:
@@ -291,24 +207,6 @@ static void __init init_node_memblock(void)
 	}
 }
 
-static void __init numa_default_distance(void)
-{
-	int row, col;
-
-	for (row = 0; row < MAX_NUMNODES; row++)
-		for (col = 0; col < MAX_NUMNODES; col++) {
-			if (col == row)
-				node_distances[row][col] = LOCAL_DISTANCE;
-			else
-				/* We assume that one node per package here!
-				 *
-				 * A SLIT should be used for multiple nodes
-				 * per package to override default setting.
-				 */
-				node_distances[row][col] = REMOTE_DISTANCE;
-	}
-}
-
 /*
  * fake_numa_init() - For Non-ACPI systems
  * Return: 0 on success, -errno on failure.
@@ -333,22 +231,16 @@ int __init init_numa_memory(void)
 	for (i = 0; i < NR_CPUS; i++)
 		set_cpuid_to_node(i, NUMA_NO_NODE);
 
-	numa_default_distance();
-	nodes_clear(numa_nodes_parsed);
-	nodes_clear(node_possible_map);
-	nodes_clear(node_online_map);
-	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
-
 	/* Parse SRAT and SLIT if provided by firmware. */
-	ret = acpi_disabled ? fake_numa_init() : acpi_numa_init();
+	if (!acpi_disabled)
+		ret = numa_memblks_init(acpi_numa_init, false);
+	else
+		ret = numa_memblks_init(fake_numa_init, false);
+
 	if (ret < 0)
 		return ret;
 
-	node_possible_map = numa_nodes_parsed;
-	if (WARN_ON(nodes_empty(node_possible_map)))
-		return -EINVAL;
-
-	init_node_memblock();
+	info_node_memblock();
 	if (!memblock_validate_numa_coverage(SZ_1M))
 		return -EINVAL;
 
@@ -356,7 +248,8 @@ int __init init_numa_memory(void)
 		node_mem_init(node);
 		node_set_online(node);
 	}
-	max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());
+	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn);
 
 	setup_nr_node_ids();
 	loongson_sysconf.nr_nodes = nr_node_ids;
@@ -367,32 +260,6 @@ int __init init_numa_memory(void)
 
 #endif
 
-void __init paging_init(void)
-{
-	unsigned int node;
-	unsigned long zones_size[MAX_NR_ZONES] = {0, };
-
-	for_each_online_node(node) {
-		unsigned long start_pfn, end_pfn;
-
-		get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
-
-		if (end_pfn > max_low_pfn)
-			max_low_pfn = end_pfn;
-	}
-#ifdef CONFIG_ZONE_DMA32
-	zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
-#endif
-	zones_size[ZONE_NORMAL] = max_low_pfn;
-	free_area_init(zones_size);
-}
-
-void __init mem_init(void)
-{
-	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
-	memblock_free_all();
-}
-
 int pcibus_to_node(struct pci_bus *bus)
 {
 	return dev_to_node(&bus->dev);
diff --git a/arch/loongarch/kernel/paravirt.c b/arch/loongarch/kernel/paravirt.c
index e5a39bbad078..b1b51f920b23 100644
--- a/arch/loongarch/kernel/paravirt.c
+++ b/arch/loongarch/kernel/paravirt.c
@@ -1,5 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/irq_work.h>
diff --git a/arch/loongarch/kernel/perf_event.c b/arch/loongarch/kernel/perf_event.c
index f86a4b838dd7..9d257c8519c9 100644
--- a/arch/loongarch/kernel/perf_event.c
+++ b/arch/loongarch/kernel/perf_event.c
@@ -479,8 +479,7 @@ static void handle_associated_event(struct cpu_hw_events *cpuc, int idx,
 	if (!loongarch_pmu_event_set_period(event, hwc, idx))
 		return;
 
-	if (perf_event_overflow(event, data, regs))
-		loongarch_pmu_disable_event(idx);
+	perf_event_overflow(event, data, regs);
 }
 
 static irqreturn_t pmu_handle_irq(int irq, void *dev)
@@ -846,13 +845,14 @@ static const struct loongarch_perf_event *loongarch_pmu_map_raw_event(u64 config
 
 static int __init init_hw_perf_events(void)
 {
-	int counters;
+	int bits, counters;
 
 	if (!cpu_has_pmp)
 		return -ENODEV;
 
 	pr_info("Performance counters: ");
-	counters = ((read_cpucfg(LOONGARCH_CPUCFG6) & CPUCFG6_PMNUM) >> 4) + 1;
+	bits = ((read_cpucfg(LOONGARCH_CPUCFG6) & CPUCFG6_PMBITS) >> CPUCFG6_PMBITS_SHIFT) + 1;
+	counters = ((read_cpucfg(LOONGARCH_CPUCFG6) & CPUCFG6_PMNUM) >> CPUCFG6_PMNUM_SHIFT) + 1;
 
 	loongarch_pmu.num_counters = counters;
 	loongarch_pmu.max_period = (1ULL << 63) - 1;
@@ -868,7 +868,7 @@ static int __init init_hw_perf_events(void)
 	on_each_cpu(reset_counters, NULL, 1);
 
 	pr_cont("%s PMU enabled, %d %d-bit counters available to each CPU.\n",
-			loongarch_pmu.name, counters, 64);
+			loongarch_pmu.name, counters, bits);
 
 	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
 
diff --git a/arch/loongarch/kernel/proc.c b/arch/loongarch/kernel/proc.c
index 6ce46d92f1f1..63d2b7e7e844 100644
--- a/arch/loongarch/kernel/proc.c
+++ b/arch/loongarch/kernel/proc.c
@@ -13,28 +13,13 @@
 #include <asm/processor.h>
 #include <asm/time.h>
 
-/*
- * No lock; only written during early bootup by CPU 0.
- */
-static RAW_NOTIFIER_HEAD(proc_cpuinfo_chain);
-
-int __ref register_proc_cpuinfo_notifier(struct notifier_block *nb)
-{
-	return raw_notifier_chain_register(&proc_cpuinfo_chain, nb);
-}
-
-int proc_cpuinfo_notifier_call_chain(unsigned long val, void *v)
-{
-	return raw_notifier_call_chain(&proc_cpuinfo_chain, val, v);
-}
-
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	unsigned long n = (unsigned long) v - 1;
 	unsigned int isa = cpu_data[n].isa_level;
+	unsigned int prid = cpu_data[n].processor_id;
 	unsigned int version = cpu_data[n].processor_id & 0xff;
 	unsigned int fp_version = cpu_data[n].fpu_vers;
-	struct proc_cpuinfo_notifier_args proc_cpuinfo_notifier_args;
 
 #ifdef CONFIG_SMP
 	if (!cpu_online(n))
@@ -53,6 +38,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "global_id\t\t: %d\n", cpu_data[n].global_id);
 	seq_printf(m, "CPU Family\t\t: %s\n", __cpu_family[n]);
 	seq_printf(m, "Model Name\t\t: %s\n", __cpu_full_name[n]);
+	seq_printf(m, "PRID\t\t\t: %s (%08x)\n", id_to_core_name(prid), prid);
 	seq_printf(m, "CPU Revision\t\t: 0x%02x\n", version);
 	seq_printf(m, "FPU Revision\t\t: 0x%02x\n", fp_version);
 	seq_printf(m, "CPU MHz\t\t\t: %llu.%02llu\n",
@@ -91,20 +77,13 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (cpu_has_lbt_mips)	seq_printf(m, " lbt_mips");
 	seq_printf(m, "\n");
 
-	seq_printf(m, "Hardware Watchpoint\t: %s",
-		      cpu_has_watch ? "yes, " : "no\n");
+	seq_printf(m, "Hardware Watchpoint\t: %s", str_yes_no(cpu_has_watch));
 	if (cpu_has_watch) {
-		seq_printf(m, "iwatch count: %d, dwatch count: %d\n",
+		seq_printf(m, ", iwatch count: %d, dwatch count: %d",
 		      cpu_data[n].watch_ireg_count, cpu_data[n].watch_dreg_count);
 	}
 
-	proc_cpuinfo_notifier_args.m = m;
-	proc_cpuinfo_notifier_args.n = n;
-
-	raw_notifier_call_chain(&proc_cpuinfo_chain, 0,
-				&proc_cpuinfo_notifier_args);
-
-	seq_printf(m, "\n");
+	seq_printf(m, "\n\n");
 
 	return 0;
 }
diff --git a/arch/loongarch/kernel/process.c b/arch/loongarch/kernel/process.c
index 6e58f65455c7..efd9edf65603 100644
--- a/arch/loongarch/kernel/process.c
+++ b/arch/loongarch/kernel/process.c
@@ -13,6 +13,7 @@
 #include <linux/cpu.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/entry-common.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
@@ -34,6 +35,7 @@
 #include <linux/nmi.h>
 
 #include <asm/asm.h>
+#include <asm/asm-prototypes.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
 #include <asm/elf.h>
@@ -47,6 +49,7 @@
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/reg.h>
+#include <asm/switch_to.h>
 #include <asm/unwind.h>
 #include <asm/vdso.h>
 
@@ -63,8 +66,9 @@ EXPORT_SYMBOL(__stack_chk_guard);
 unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
 EXPORT_SYMBOL(boot_option_idle_override);
 
-asmlinkage void ret_from_fork(void);
-asmlinkage void ret_from_kernel_thread(void);
+asmlinkage void restore_and_ret(void);
+asmlinkage void ret_from_fork_asm(void);
+asmlinkage void ret_from_kernel_thread_asm(void);
 
 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
 {
@@ -138,6 +142,23 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	return 0;
 }
 
+asmlinkage void noinstr __no_stack_protector ret_from_fork(struct task_struct *prev,
+							   struct pt_regs *regs)
+{
+	schedule_tail(prev);
+	syscall_exit_to_user_mode(regs);
+}
+
+asmlinkage void noinstr __no_stack_protector ret_from_kernel_thread(struct task_struct *prev,
+								    struct pt_regs *regs,
+								    int (*fn)(void *),
+								    void *fn_arg)
+{
+	schedule_tail(prev);
+	fn(fn_arg);
+	syscall_exit_to_user_mode(regs);
+}
+
 /*
  * Copy architecture-specific thread state
  */
@@ -146,7 +167,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	unsigned long childksp;
 	unsigned long tls = args->tls;
 	unsigned long usp = args->stack;
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	struct pt_regs *childregs, *regs = current_pt_regs();
 
 	childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE;
@@ -165,8 +186,8 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		p->thread.reg03 = childksp;
 		p->thread.reg23 = (unsigned long)args->fn;
 		p->thread.reg24 = (unsigned long)args->fn_arg;
-		p->thread.reg01 = (unsigned long)ret_from_kernel_thread;
-		p->thread.sched_ra = (unsigned long)ret_from_kernel_thread;
+		p->thread.reg01 = (unsigned long)ret_from_kernel_thread_asm;
+		p->thread.sched_ra = (unsigned long)ret_from_kernel_thread_asm;
 		memset(childregs, 0, sizeof(struct pt_regs));
 		childregs->csr_euen = p->thread.csr_euen;
 		childregs->csr_crmd = p->thread.csr_crmd;
@@ -182,8 +203,8 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 		childregs->regs[3] = usp;
 
 	p->thread.reg03 = (unsigned long) childregs;
-	p->thread.reg01 = (unsigned long) ret_from_fork;
-	p->thread.sched_ra = (unsigned long) ret_from_fork;
+	p->thread.reg01 = (unsigned long) ret_from_fork_asm;
+	p->thread.sched_ra = (unsigned long) ret_from_fork_asm;
 
 	/*
 	 * New tasks lose permission to use the fpu. This accelerates context
diff --git a/arch/loongarch/kernel/ptrace.c b/arch/loongarch/kernel/ptrace.c
index 19dc6eff45cc..8edd0954e55a 100644
--- a/arch/loongarch/kernel/ptrace.c
+++ b/arch/loongarch/kernel/ptrace.c
@@ -720,7 +720,7 @@ static int hw_break_set(struct task_struct *target,
 	unsigned int note_type = regset->core_note_type;
 
 	/* Resource info */
-	offset = offsetof(struct user_watch_state, dbg_regs);
+	offset = offsetof(struct user_watch_state_v2, dbg_regs);
 	user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, offset);
 
 	/* (address, mask, ctrl) registers */
@@ -864,7 +864,7 @@ enum loongarch_regset {
 
 static const struct user_regset loongarch64_regsets[] = {
 	[REGSET_GPR] = {
-		.core_note_type	= NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n		= ELF_NGREG,
 		.size		= sizeof(elf_greg_t),
 		.align		= sizeof(elf_greg_t),
@@ -872,7 +872,7 @@ static const struct user_regset loongarch64_regsets[] = {
 		.set		= gpr_set,
 	},
 	[REGSET_FPR] = {
-		.core_note_type	= NT_PRFPREG,
+		USER_REGSET_NOTE_TYPE(PRFPREG),
 		.n		= ELF_NFPREG,
 		.size		= sizeof(elf_fpreg_t),
 		.align		= sizeof(elf_fpreg_t),
@@ -880,7 +880,7 @@ static const struct user_regset loongarch64_regsets[] = {
 		.set		= fpr_set,
 	},
 	[REGSET_CPUCFG] = {
-		.core_note_type	= NT_LOONGARCH_CPUCFG,
+		USER_REGSET_NOTE_TYPE(LOONGARCH_CPUCFG),
 		.n		= 64,
 		.size		= sizeof(u32),
 		.align		= sizeof(u32),
@@ -889,7 +889,7 @@ static const struct user_regset loongarch64_regsets[] = {
 	},
 #ifdef CONFIG_CPU_HAS_LSX
 	[REGSET_LSX] = {
-		.core_note_type	= NT_LOONGARCH_LSX,
+		USER_REGSET_NOTE_TYPE(LOONGARCH_LSX),
 		.n		= NUM_FPU_REGS,
 		.size		= 16,
 		.align		= 16,
@@ -899,7 +899,7 @@ static const struct user_regset loongarch64_regsets[] = {
 #endif
 #ifdef CONFIG_CPU_HAS_LASX
 	[REGSET_LASX] = {
-		.core_note_type	= NT_LOONGARCH_LASX,
+		USER_REGSET_NOTE_TYPE(LOONGARCH_LASX),
 		.n		= NUM_FPU_REGS,
 		.size		= 32,
 		.align		= 32,
@@ -909,7 +909,7 @@ static const struct user_regset loongarch64_regsets[] = {
 #endif
 #ifdef CONFIG_CPU_HAS_LBT
 	[REGSET_LBT] = {
-		.core_note_type	= NT_LOONGARCH_LBT,
+		USER_REGSET_NOTE_TYPE(LOONGARCH_LBT),
 		.n		= 5,
 		.size		= sizeof(u64),
 		.align		= sizeof(u64),
@@ -919,16 +919,16 @@ static const struct user_regset loongarch64_regsets[] = {
 #endif
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 	[REGSET_HW_BREAK] = {
-		.core_note_type = NT_LOONGARCH_HW_BREAK,
-		.n = sizeof(struct user_watch_state) / sizeof(u32),
+		USER_REGSET_NOTE_TYPE(LOONGARCH_HW_BREAK),
+		.n = sizeof(struct user_watch_state_v2) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
 		.regset_get = hw_break_get,
 		.set = hw_break_set,
 	},
 	[REGSET_HW_WATCH] = {
-		.core_note_type = NT_LOONGARCH_HW_WATCH,
-		.n = sizeof(struct user_watch_state) / sizeof(u32),
+		USER_REGSET_NOTE_TYPE(LOONGARCH_HW_WATCH),
+		.n = sizeof(struct user_watch_state_v2) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
 		.regset_get = hw_break_get,
diff --git a/arch/loongarch/kernel/relocate.c b/arch/loongarch/kernel/relocate.c
index 50c469067f3a..b5e2312a2fca 100644
--- a/arch/loongarch/kernel/relocate.c
+++ b/arch/loongarch/kernel/relocate.c
@@ -166,6 +166,10 @@ static inline __init bool kaslr_disabled(void)
 		return true;
 #endif
 
+	str = strstr(boot_command_line, "kexec_file");
+	if (str == boot_command_line || (str > boot_command_line && *(str - 1) == ' '))
+		return true;
+
 	return false;
 }
 
diff --git a/arch/loongarch/kernel/relocate_kernel.S b/arch/loongarch/kernel/relocate_kernel.S
index 84e6de2fd973..8b5140ac9ea1 100644
--- a/arch/loongarch/kernel/relocate_kernel.S
+++ b/arch/loongarch/kernel/relocate_kernel.S
@@ -109,4 +109,4 @@ SYM_CODE_END(kexec_smp_wait)
 relocate_new_kernel_end:
 
 	.section ".data"
-SYM_DATA(relocate_new_kernel_size, .long relocate_new_kernel_end - relocate_new_kernel)
+SYM_DATA(relocate_new_kernel_size, .quad relocate_new_kernel_end - relocate_new_kernel)
diff --git a/arch/loongarch/kernel/reset.c b/arch/loongarch/kernel/reset.c
index 1ef8c6383535..de8fa5a8a825 100644
--- a/arch/loongarch/kernel/reset.c
+++ b/arch/loongarch/kernel/reset.c
@@ -33,7 +33,7 @@ void machine_halt(void)
 	console_flush_on_panic(CONSOLE_FLUSH_PENDING);
 
 	while (true) {
-		__arch_cpu_idle();
+		__asm__ __volatile__("idle 0" : : : "memory");
 	}
 }
 
@@ -53,7 +53,7 @@ void machine_power_off(void)
 #endif
 
 	while (true) {
-		__arch_cpu_idle();
+		__asm__ __volatile__("idle 0" : : : "memory");
 	}
 }
 
@@ -74,6 +74,6 @@ void machine_restart(char *command)
 		acpi_reboot();
 
 	while (true) {
-		__arch_cpu_idle();
+		__asm__ __volatile__("idle 0" : : : "memory");
 	}
 }
diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c
index 56934fe58170..25a87378e48e 100644
--- a/arch/loongarch/kernel/setup.c
+++ b/arch/loongarch/kernel/setup.c
@@ -191,6 +191,16 @@ static int __init early_parse_mem(char *p)
 		return -EINVAL;
 	}
 
+	start = 0;
+	size = memparse(p, &p);
+	if (*p == '@')	/* Every mem=... should contain '@' */
+		start = memparse(p + 1, &p);
+	else {		/* Only one mem=... is allowed if no '@' */
+		usermem = 1;
+		memblock_enforce_memory_limit(size);
+		return 0;
+	}
+
 	/*
 	 * If a user specifies memory size, we
 	 * blow away any automatically generated
@@ -201,14 +211,6 @@ static int __init early_parse_mem(char *p)
 		memblock_remove(memblock_start_of_DRAM(),
 			memblock_end_of_DRAM() - memblock_start_of_DRAM());
 	}
-	start = 0;
-	size = memparse(p, &p);
-	if (*p == '@')
-		start = memparse(p + 1, &p);
-	else {
-		pr_err("Invalid format!\n");
-		return -EINVAL;
-	}
 
 	if (!IS_ENABLED(CONFIG_NUMA))
 		memblock_add(start, size);
@@ -259,18 +261,17 @@ static void __init arch_reserve_crashkernel(void)
 	int ret;
 	unsigned long long low_size = 0;
 	unsigned long long crash_base, crash_size;
-	char *cmdline = boot_command_line;
 	bool high = false;
 
 	if (!IS_ENABLED(CONFIG_CRASH_RESERVE))
 		return;
 
-	ret = parse_crashkernel(cmdline, memblock_phys_mem_size(),
-				&crash_size, &crash_base, &low_size, &high);
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
+				&crash_size, &crash_base, &low_size, NULL, &high);
 	if (ret)
 		return;
 
-	reserve_crashkernel_generic(cmdline, crash_size, crash_base, low_size, high);
+	reserve_crashkernel_generic(crash_size, crash_base, low_size, high);
 }
 
 static void __init fdt_setup(void)
@@ -293,8 +294,6 @@ static void __init fdt_setup(void)
 
 	early_init_dt_scan(fdt_pointer, __pa(fdt_pointer));
 	early_init_fdt_reserve_self();
-
-	max_low_pfn = PFN_PHYS(memblock_end_of_DRAM());
 #endif
 }
 
@@ -354,6 +353,7 @@ void __init platform_init(void)
 
 #ifdef CONFIG_ACPI
 	acpi_table_upgrade();
+	acpi_gbl_use_global_lock = false;
 	acpi_gbl_use_default_register_widths = false;
 	acpi_boot_table_init();
 #endif
@@ -387,6 +387,10 @@ static void __init check_kernel_sections_mem(void)
  */
 static void __init arch_mem_init(char **cmdline_p)
 {
+	/* Recalculate max_low_pfn for "mem=xxx" */
+	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	max_low_pfn = min(PFN_DOWN(HIGHMEM_START), max_pfn);
+
 	if (usermem)
 		pr_info("User-defined physical RAM map overwrite\n");
 
@@ -431,7 +435,7 @@ static void __init resource_init(void)
 
 	num_standard_resources = memblock.memory.cnt;
 	res_size = num_standard_resources * sizeof(*standard_resources);
-	standard_resources = memblock_alloc(res_size, SMP_CACHE_BYTES);
+	standard_resources = memblock_alloc_or_panic(res_size, SMP_CACHE_BYTES);
 
 	for_each_mem_region(region) {
 		res = &standard_resources[i++];
diff --git a/arch/loongarch/kernel/signal.c b/arch/loongarch/kernel/signal.c
index 7a555b600171..c9f7ca778364 100644
--- a/arch/loongarch/kernel/signal.c
+++ b/arch/loongarch/kernel/signal.c
@@ -51,27 +51,6 @@
 #define lock_lbt_owner()	({ preempt_disable(); pagefault_disable(); })
 #define unlock_lbt_owner()	({ pagefault_enable(); preempt_enable(); })
 
-/* Assembly functions to move context to/from the FPU */
-extern asmlinkage int
-_save_fp_context(void __user *fpregs, void __user *fcc, void __user *csr);
-extern asmlinkage int
-_restore_fp_context(void __user *fpregs, void __user *fcc, void __user *csr);
-extern asmlinkage int
-_save_lsx_context(void __user *fpregs, void __user *fcc, void __user *fcsr);
-extern asmlinkage int
-_restore_lsx_context(void __user *fpregs, void __user *fcc, void __user *fcsr);
-extern asmlinkage int
-_save_lasx_context(void __user *fpregs, void __user *fcc, void __user *fcsr);
-extern asmlinkage int
-_restore_lasx_context(void __user *fpregs, void __user *fcc, void __user *fcsr);
-
-#ifdef CONFIG_CPU_HAS_LBT
-extern asmlinkage int _save_lbt_context(void __user *regs, void __user *eflags);
-extern asmlinkage int _restore_lbt_context(void __user *regs, void __user *eflags);
-extern asmlinkage int _save_ftop_context(void __user *ftop);
-extern asmlinkage int _restore_ftop_context(void __user *ftop);
-#endif
-
 struct rt_sigframe {
 	struct siginfo rs_info;
 	struct ucontext rs_uctx;
@@ -698,6 +677,11 @@ static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 	for (i = 1; i < 32; i++)
 		err |= __put_user(regs->regs[i], &sc->sc_regs[i]);
 
+#ifdef CONFIG_CPU_HAS_LBT
+	if (extctx->lbt.addr)
+		err |= protected_save_lbt_context(extctx);
+#endif
+
 	if (extctx->lasx.addr)
 		err |= protected_save_lasx_context(extctx);
 	else if (extctx->lsx.addr)
@@ -705,11 +689,6 @@ static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 	else if (extctx->fpu.addr)
 		err |= protected_save_fpu_context(extctx);
 
-#ifdef CONFIG_CPU_HAS_LBT
-	if (extctx->lbt.addr)
-		err |= protected_save_lbt_context(extctx);
-#endif
-
 	/* Set the "end" magic */
 	info = (struct sctx_info *)extctx->end.addr;
 	err |= __put_user(0, &info->magic);
diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c
index 5d59e9ce2772..8b2fcb3fb874 100644
--- a/arch/loongarch/kernel/smp.c
+++ b/arch/loongarch/kernel/smp.c
@@ -19,6 +19,7 @@
 #include <linux/smp.h>
 #include <linux/threads.h>
 #include <linux/export.h>
+#include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/time.h>
 #include <linux/tracepoint.h>
@@ -45,6 +46,10 @@ EXPORT_SYMBOL(__cpu_logical_map);
 cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(cpu_sibling_map);
 
+/* Representing the last level cache shared map of each logical CPU */
+cpumask_t cpu_llc_shared_map[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(cpu_llc_shared_map);
+
 /* Representing the core map of multi-core chips of each logical CPU */
 cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(cpu_core_map);
@@ -62,6 +67,9 @@ EXPORT_SYMBOL(cpu_foreign_map);
 /* representing cpus for which sibling maps can be computed */
 static cpumask_t cpu_sibling_setup_map;
 
+/* representing cpus for which llc shared maps can be computed */
+static cpumask_t cpu_llc_shared_setup_map;
+
 /* representing cpus for which core maps can be computed */
 static cpumask_t cpu_core_setup_map;
 
@@ -82,7 +90,7 @@ void show_ipi_list(struct seq_file *p, int prec)
 	for (i = 0; i < NR_IPI; i++) {
 		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i, prec >= 4 ? " " : "");
 		for_each_online_cpu(cpu)
-			seq_printf(p, "%10u ", per_cpu(irq_stat, cpu).ipi_irqs[i]);
+			seq_put_decimal_ull_width(p, " ", per_cpu(irq_stat, cpu).ipi_irqs[i], 10);
 		seq_printf(p, " LoongArch  %d  %s\n", i + 1, ipi_types[i]);
 	}
 }
@@ -101,6 +109,34 @@ static inline void set_cpu_core_map(int cpu)
 	}
 }
 
+static inline void set_cpu_llc_shared_map(int cpu)
+{
+	int i;
+
+	cpumask_set_cpu(cpu, &cpu_llc_shared_setup_map);
+
+	for_each_cpu(i, &cpu_llc_shared_setup_map) {
+		if (cpu_to_node(cpu) == cpu_to_node(i)) {
+			cpumask_set_cpu(i, &cpu_llc_shared_map[cpu]);
+			cpumask_set_cpu(cpu, &cpu_llc_shared_map[i]);
+		}
+	}
+}
+
+static inline void clear_cpu_llc_shared_map(int cpu)
+{
+	int i;
+
+	for_each_cpu(i, &cpu_llc_shared_setup_map) {
+		if (cpu_to_node(cpu) == cpu_to_node(i)) {
+			cpumask_clear_cpu(i, &cpu_llc_shared_map[cpu]);
+			cpumask_clear_cpu(cpu, &cpu_llc_shared_map[i]);
+		}
+	}
+
+	cpumask_clear_cpu(cpu, &cpu_llc_shared_setup_map);
+}
+
 static inline void set_cpu_sibling_map(int cpu)
 {
 	int i;
@@ -405,6 +441,7 @@ int loongson_cpu_disable(void)
 #endif
 	set_cpu_online(cpu, false);
 	clear_cpu_sibling_map(cpu);
+	clear_cpu_llc_shared_map(cpu);
 	calculate_cpu_foreign_map();
 	local_irq_save(flags);
 	irq_migrate_all_off_this_cpu();
@@ -423,7 +460,7 @@ void loongson_cpu_die(unsigned int cpu)
 	mb();
 }
 
-void __noreturn arch_cpu_idle_dead(void)
+static void __noreturn idle_play_dead(void)
 {
 	register uint64_t addr;
 	register void (*init_fn)(void);
@@ -447,6 +484,50 @@ void __noreturn arch_cpu_idle_dead(void)
 	BUG();
 }
 
+#ifdef CONFIG_HIBERNATION
+static void __noreturn poll_play_dead(void)
+{
+	register uint64_t addr;
+	register void (*init_fn)(void);
+
+	idle_task_exit();
+	__this_cpu_write(cpu_state, CPU_DEAD);
+
+	__smp_mb();
+	do {
+		__asm__ __volatile__("nop\n\t");
+		addr = iocsr_read64(LOONGARCH_IOCSR_MBUF0);
+	} while (addr == 0);
+
+	init_fn = (void *)TO_CACHE(addr);
+	iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR);
+
+	init_fn();
+	BUG();
+}
+#endif
+
+static void (*play_dead)(void) = idle_play_dead;
+
+void __noreturn arch_cpu_idle_dead(void)
+{
+	play_dead();
+	BUG(); /* play_dead() doesn't return */
+}
+
+#ifdef CONFIG_HIBERNATION
+int hibernate_resume_nonboot_cpu_disable(void)
+{
+	int ret;
+
+	play_dead = poll_play_dead;
+	ret = suspend_disable_secondary_cpus();
+	play_dead = idle_play_dead;
+
+	return ret;
+}
+#endif
+
 #endif
 
 /*
@@ -454,28 +535,32 @@ void __noreturn arch_cpu_idle_dead(void)
  */
 #ifdef CONFIG_PM
 
-static int loongson_ipi_suspend(void)
+static int loongson_ipi_suspend(void *data)
 {
 	return 0;
 }
 
-static void loongson_ipi_resume(void)
+static void loongson_ipi_resume(void *data)
 {
 	iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_EN);
 }
 
-static struct syscore_ops loongson_ipi_syscore_ops = {
+static const struct syscore_ops loongson_ipi_syscore_ops = {
 	.resume         = loongson_ipi_resume,
 	.suspend        = loongson_ipi_suspend,
 };
 
+static struct syscore loongson_ipi_syscore = {
+	.ops = &loongson_ipi_syscore_ops,
+};
+
 /*
  * Enable boot cpu ipi before enabling nonboot cpus
  * during syscore_resume.
  */
 static int __init ipi_pm_init(void)
 {
-	register_syscore_ops(&loongson_ipi_syscore_ops);
+	register_syscore(&loongson_ipi_syscore);
 	return 0;
 }
 
@@ -527,6 +612,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	current_thread_info()->cpu = 0;
 	loongson_prepare_cpus(max_cpus);
 	set_cpu_sibling_map(0);
+	set_cpu_llc_shared_map(0);
 	set_cpu_core_map(0);
 	calculate_cpu_foreign_map();
 #ifndef CONFIG_HOTPLUG_CPU
@@ -568,6 +654,7 @@ asmlinkage void start_secondary(void)
 	loongson_init_secondary();
 
 	set_cpu_sibling_map(cpu);
+	set_cpu_llc_shared_map(cpu);
 	set_cpu_core_map(cpu);
 
 	notify_cpu_starting(cpu);
diff --git a/arch/loongarch/kernel/stacktrace.c b/arch/loongarch/kernel/stacktrace.c
index 9a038d1070d7..387dc4d3c486 100644
--- a/arch/loongarch/kernel/stacktrace.c
+++ b/arch/loongarch/kernel/stacktrace.c
@@ -51,12 +51,13 @@ int arch_stack_walk_reliable(stack_trace_consume_fn consume_entry,
 	if (task == current) {
 		regs->regs[3] = (unsigned long)__builtin_frame_address(0);
 		regs->csr_era = (unsigned long)__builtin_return_address(0);
+		regs->regs[22] = 0;
 	} else {
 		regs->regs[3] = thread_saved_fp(task);
 		regs->csr_era = thread_saved_ra(task);
+		regs->regs[22] = task->thread.reg22;
 	}
 	regs->regs[1] = 0;
-	regs->regs[22] = 0;
 
 	for (unwind_start(&state, task, regs);
 	     !unwind_done(&state) && !unwind_error(&state); unwind_next_frame(&state)) {
diff --git a/arch/loongarch/kernel/switch.S b/arch/loongarch/kernel/switch.S
index 31dd8199b245..9c23cb7e432f 100644
--- a/arch/loongarch/kernel/switch.S
+++ b/arch/loongarch/kernel/switch.S
@@ -12,7 +12,7 @@
 
 /*
  * task_struct *__switch_to(task_struct *prev, task_struct *next,
- *			    struct thread_info *next_ti)
+ *			    struct thread_info *next_ti, void *sched_ra, void *sched_cfa)
  */
 	.align	5
 SYM_FUNC_START(__switch_to)
diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c
index a07d7eff4dc5..6fb92cc1a4c9 100644
--- a/arch/loongarch/kernel/time.c
+++ b/arch/loongarch/kernel/time.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
 #include <linux/clockchips.h>
+#include <linux/cpuhotplug.h>
 #include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/init.h>
@@ -102,7 +103,22 @@ static int constant_timer_next_event(unsigned long delta, struct clock_event_dev
 	return 0;
 }
 
-static unsigned long __init get_loops_per_jiffy(void)
+static int arch_timer_starting(unsigned int cpu)
+{
+	set_csr_ecfg(ECFGF_TIMER);
+
+	return 0;
+}
+
+static int arch_timer_dying(unsigned int cpu)
+{
+	/* Clear Timer Interrupt */
+	write_csr_tintclear(CSR_TINTCLR_TI);
+
+	return 0;
+}
+
+static unsigned long get_loops_per_jiffy(void)
 {
 	unsigned long lpj = (unsigned long)const_clock_freq;
 
@@ -111,7 +127,7 @@ static unsigned long __init get_loops_per_jiffy(void)
 	return lpj;
 }
 
-static long init_offset __nosavedata;
+static long init_offset;
 
 void save_counter(void)
 {
@@ -132,7 +148,7 @@ int constant_clockevent_init(void)
 #else
 	unsigned long min_delta = 1000;
 #endif
-	unsigned long max_delta = (1UL << 48) - 1;
+	unsigned long max_delta = GENMASK_ULL(boot_cpu_data.timerbits, 0);
 	struct clock_event_device *cd;
 	static int irq = 0, timer_irq_installed = 0;
 
@@ -172,6 +188,10 @@ int constant_clockevent_init(void)
 	lpj_fine = get_loops_per_jiffy();
 	pr_info("Constant clock event device register\n");
 
+	cpuhp_setup_state(CPUHP_AP_LOONGARCH_ARCH_TIMER_STARTING,
+			  "clockevents/loongarch/timer:starting",
+			  arch_timer_starting, arch_timer_dying);
+
 	return 0;
 }
 
diff --git a/arch/loongarch/kernel/traps.c b/arch/loongarch/kernel/traps.c
index c57b4134f3e8..da5926fead4a 100644
--- a/arch/loongarch/kernel/traps.c
+++ b/arch/loongarch/kernel/traps.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/kexec.h>
 #include <linux/module.h>
+#include <linux/export.h>
 #include <linux/extable.h>
 #include <linux/mm.h>
 #include <linux/sched/mm.h>
@@ -553,9 +554,10 @@ asmlinkage void noinstr do_ale(struct pt_regs *regs)
 	die_if_kernel("Kernel ale access", regs);
 	force_sig_fault(SIGBUS, BUS_ADRALN, (void __user *)regs->csr_badvaddr);
 #else
+	bool pie = regs_irqs_disabled(regs);
 	unsigned int *pc;
 
-	if (regs->csr_prmd & CSR_PRMD_PIE)
+	if (!pie)
 		local_irq_enable();
 
 	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, regs->csr_badvaddr);
@@ -582,7 +584,7 @@ sigbus:
 	die_if_kernel("Kernel ale access", regs);
 	force_sig_fault(SIGBUS, BUS_ADRALN, (void __user *)regs->csr_badvaddr);
 out:
-	if (regs->csr_prmd & CSR_PRMD_PIE)
+	if (!pie)
 		local_irq_disable();
 #endif
 	irqentry_exit(regs, state);
@@ -597,29 +599,37 @@ int is_valid_bugaddr(unsigned long addr)
 
 static void bug_handler(struct pt_regs *regs)
 {
+	if (user_mode(regs)) {
+		force_sig(SIGTRAP);
+		return;
+	}
+
 	switch (report_bug(regs->csr_era, regs)) {
 	case BUG_TRAP_TYPE_BUG:
-	case BUG_TRAP_TYPE_NONE:
-		die_if_kernel("Oops - BUG", regs);
-		force_sig(SIGTRAP);
+		die("Oops - BUG", regs);
 		break;
 
 	case BUG_TRAP_TYPE_WARN:
 		/* Skip the BUG instruction and continue */
 		regs->csr_era += LOONGARCH_INSN_SIZE;
 		break;
+
+	default:
+		if (!fixup_exception(regs))
+			die("Oops - BUG", regs);
 	}
 }
 
 asmlinkage void noinstr do_bce(struct pt_regs *regs)
 {
 	bool user = user_mode(regs);
+	bool pie = regs_irqs_disabled(regs);
 	unsigned long era = exception_era(regs);
 	u64 badv = 0, lower = 0, upper = ULONG_MAX;
 	union loongarch_instruction insn;
 	irqentry_state_t state = irqentry_enter(regs);
 
-	if (regs->csr_prmd & CSR_PRMD_PIE)
+	if (!pie)
 		local_irq_enable();
 
 	current->thread.trap_nr = read_csr_excode();
@@ -685,7 +695,7 @@ asmlinkage void noinstr do_bce(struct pt_regs *regs)
 	force_sig_bnderr((void __user *)badv, (void __user *)lower, (void __user *)upper);
 
 out:
-	if (regs->csr_prmd & CSR_PRMD_PIE)
+	if (!pie)
 		local_irq_disable();
 
 	irqentry_exit(regs, state);
@@ -703,11 +713,12 @@ bad_era:
 asmlinkage void noinstr do_bp(struct pt_regs *regs)
 {
 	bool user = user_mode(regs);
+	bool pie = regs_irqs_disabled(regs);
 	unsigned int opcode, bcode;
 	unsigned long era = exception_era(regs);
 	irqentry_state_t state = irqentry_enter(regs);
 
-	if (regs->csr_prmd & CSR_PRMD_PIE)
+	if (!pie)
 		local_irq_enable();
 
 	if (__get_inst(&opcode, (u32 *)era, user))
@@ -773,7 +784,7 @@ asmlinkage void noinstr do_bp(struct pt_regs *regs)
 	}
 
 out:
-	if (regs->csr_prmd & CSR_PRMD_PIE)
+	if (!pie)
 		local_irq_disable();
 
 	irqentry_exit(regs, state);
@@ -1008,6 +1019,7 @@ static void init_restore_lbt(void)
 
 asmlinkage void noinstr do_lbt(struct pt_regs *regs)
 {
+	bool pie = regs_irqs_disabled(regs);
 	irqentry_state_t state = irqentry_enter(regs);
 
 	/*
@@ -1017,7 +1029,7 @@ asmlinkage void noinstr do_lbt(struct pt_regs *regs)
 	 * (including the user using 'MOVGR2GCSR' to turn on TM, which
 	 * will not trigger the BTE), we need to check PRMD first.
 	 */
-	if (regs->csr_prmd & CSR_PRMD_PIE)
+	if (!pie)
 		local_irq_enable();
 
 	if (!cpu_has_lbt) {
@@ -1031,7 +1043,7 @@ asmlinkage void noinstr do_lbt(struct pt_regs *regs)
 	preempt_enable();
 
 out:
-	if (regs->csr_prmd & CSR_PRMD_PIE)
+	if (!pie)
 		local_irq_disable();
 
 	irqentry_exit(regs, state);
@@ -1119,8 +1131,8 @@ static void configure_exception_vector(void)
 	tlbrentry = (unsigned long)exception_handlers + 80*VECSIZE;
 
 	csr_write64(eentry, LOONGARCH_CSR_EENTRY);
-	csr_write64(eentry, LOONGARCH_CSR_MERRENTRY);
-	csr_write64(tlbrentry, LOONGARCH_CSR_TLBRENTRY);
+	csr_write64(__pa(eentry), LOONGARCH_CSR_MERRENTRY);
+	csr_write64(__pa(tlbrentry), LOONGARCH_CSR_TLBRENTRY);
 }
 
 void per_cpu_trap_init(int cpu)
diff --git a/arch/loongarch/kernel/unaligned.c b/arch/loongarch/kernel/unaligned.c
index 3abf163dda05..487be604b96a 100644
--- a/arch/loongarch/kernel/unaligned.c
+++ b/arch/loongarch/kernel/unaligned.c
@@ -482,14 +482,10 @@ sigbus:
 #ifdef CONFIG_DEBUG_FS
 static int __init debugfs_unaligned(void)
 {
-	struct dentry *d;
-
-	d = debugfs_create_dir("loongarch", NULL);
-
 	debugfs_create_u32("unaligned_instructions_user",
-				S_IRUGO, d, &unaligned_instructions_user);
+				S_IRUGO, arch_debugfs_dir, &unaligned_instructions_user);
 	debugfs_create_u32("unaligned_instructions_kernel",
-				S_IRUGO, d, &unaligned_instructions_kernel);
+				S_IRUGO, arch_debugfs_dir, &unaligned_instructions_kernel);
 
 	return 0;
 }
diff --git a/arch/loongarch/kernel/unwind_guess.c b/arch/loongarch/kernel/unwind_guess.c
index 98379b7d4147..08d7951b2f60 100644
--- a/arch/loongarch/kernel/unwind_guess.c
+++ b/arch/loongarch/kernel/unwind_guess.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2022 Loongson Technology Corporation Limited
  */
 #include <asm/unwind.h>
+#include <linux/export.h>
 
 unsigned long unwind_get_return_address(struct unwind_state *state)
 {
diff --git a/arch/loongarch/kernel/unwind_orc.c b/arch/loongarch/kernel/unwind_orc.c
index b25722876331..0d5fa64a2225 100644
--- a/arch/loongarch/kernel/unwind_orc.c
+++ b/arch/loongarch/kernel/unwind_orc.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
-#include <linux/objtool.h>
+#include <linux/export.h>
 #include <linux/module.h>
+#include <linux/objtool.h>
 #include <linux/sort.h>
 #include <asm/exception.h>
 #include <asm/orc_header.h>
@@ -399,7 +400,7 @@ bool unwind_next_frame(struct unwind_state *state)
 		return false;
 
 	/* Don't let modules unload while we're reading their ORC data. */
-	preempt_disable();
+	guard(rcu)();
 
 	if (is_entry_func(state->pc))
 		goto end;
@@ -507,21 +508,19 @@ bool unwind_next_frame(struct unwind_state *state)
 
 	state->pc = bt_address(pc);
 	if (!state->pc) {
-		pr_err("cannot find unwind pc at %pK\n", (void *)pc);
+		pr_err("cannot find unwind pc at %p\n", (void *)pc);
 		goto err;
 	}
 
 	if (!__kernel_text_address(state->pc))
 		goto err;
 
-	preempt_enable();
 	return true;
 
 err:
 	state->error = true;
 
 end:
-	preempt_enable();
 	state->stack_info.type = STACK_TYPE_UNKNOWN;
 	return false;
 }
diff --git a/arch/loongarch/kernel/unwind_prologue.c b/arch/loongarch/kernel/unwind_prologue.c
index 929ae240280a..729e775bd40d 100644
--- a/arch/loongarch/kernel/unwind_prologue.c
+++ b/arch/loongarch/kernel/unwind_prologue.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2022 Loongson Technology Corporation Limited
  */
 #include <linux/cpumask.h>
+#include <linux/export.h>
 #include <linux/ftrace.h>
 #include <linux/kallsyms.h>
 
diff --git a/arch/loongarch/kernel/uprobes.c b/arch/loongarch/kernel/uprobes.c
index 87abc7137b73..6022eb0f71db 100644
--- a/arch/loongarch/kernel/uprobes.c
+++ b/arch/loongarch/kernel/uprobes.c
@@ -42,7 +42,6 @@ int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 	utask->autask.saved_trap_nr = current->thread.trap_nr;
 	current->thread.trap_nr = UPROBE_TRAP_NR;
 	instruction_pointer_set(regs, utask->xol_vaddr);
-	user_enable_single_step(current);
 
 	return 0;
 }
@@ -53,13 +52,7 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 
 	WARN_ON_ONCE(current->thread.trap_nr != UPROBE_TRAP_NR);
 	current->thread.trap_nr = utask->autask.saved_trap_nr;
-
-	if (auprobe->simulate)
-		instruction_pointer_set(regs, auprobe->resume_era);
-	else
-		instruction_pointer_set(regs, utask->vaddr + LOONGARCH_INSN_SIZE);
-
-	user_disable_single_step(current);
+	instruction_pointer_set(regs, utask->vaddr + LOONGARCH_INSN_SIZE);
 
 	return 0;
 }
@@ -70,7 +63,6 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 
 	current->thread.trap_nr = utask->autask.saved_trap_nr;
 	instruction_pointer_set(regs, utask->vaddr);
-	user_disable_single_step(current);
 }
 
 bool arch_uprobe_xol_was_trapped(struct task_struct *t)
@@ -90,7 +82,6 @@ bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
 
 	insn.word = auprobe->insn[0];
 	arch_simulate_insn(insn, regs);
-	auprobe->resume_era = regs->csr_era;
 
 	return true;
 }
diff --git a/arch/loongarch/kernel/vdso.c b/arch/loongarch/kernel/vdso.c
index 05e5fbac102a..dee1a15d7f4c 100644
--- a/arch/loongarch/kernel/vdso.c
+++ b/arch/loongarch/kernel/vdso.c
@@ -14,7 +14,7 @@
 #include <linux/random.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/time_namespace.h>
+#include <linux/vdso_datastore.h>
 
 #include <asm/page.h>
 #include <asm/vdso.h>
@@ -25,18 +25,6 @@
 
 extern char vdso_start[], vdso_end[];
 
-/* Kernel-provided data used by the VDSO. */
-static union vdso_data_store generic_vdso_data __page_aligned_data;
-
-static union {
-	u8 page[LOONGARCH_VDSO_DATA_SIZE];
-	struct loongarch_vdso_data vdata;
-} loongarch_vdso_data __page_aligned_data;
-
-struct vdso_data *vdso_data = generic_vdso_data.data;
-struct vdso_pcpu_data *vdso_pdata = loongarch_vdso_data.vdata.pdata;
-struct vdso_rng_data *vdso_rng_data = &loongarch_vdso_data.vdata.rng_data;
-
 static int vdso_mremap(const struct vm_special_mapping *sm, struct vm_area_struct *new_vma)
 {
 	current->mm->context.vdso = (void *)(new_vma->vm_start);
@@ -44,53 +32,12 @@ static int vdso_mremap(const struct vm_special_mapping *sm, struct vm_area_struc
 	return 0;
 }
 
-static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
-			     struct vm_area_struct *vma, struct vm_fault *vmf)
-{
-	unsigned long pfn;
-	struct page *timens_page = find_timens_vvar_page(vma);
-
-	switch (vmf->pgoff) {
-	case VVAR_GENERIC_PAGE_OFFSET:
-		if (!timens_page)
-			pfn = sym_to_pfn(vdso_data);
-		else
-			pfn = page_to_pfn(timens_page);
-		break;
-#ifdef CONFIG_TIME_NS
-	case VVAR_TIMENS_PAGE_OFFSET:
-		/*
-		 * If a task belongs to a time namespace then a namespace specific
-		 * VVAR is mapped with the VVAR_GENERIC_PAGE_OFFSET and the real
-		 * VVAR page is mapped with the VVAR_TIMENS_PAGE_OFFSET offset.
-		 * See also the comment near timens_setup_vdso_data().
-		 */
-		if (!timens_page)
-			return VM_FAULT_SIGBUS;
-		else
-			pfn = sym_to_pfn(vdso_data);
-		break;
-#endif /* CONFIG_TIME_NS */
-	case VVAR_LOONGARCH_PAGES_START ... VVAR_LOONGARCH_PAGES_END:
-		pfn = sym_to_pfn(&loongarch_vdso_data) + vmf->pgoff - VVAR_LOONGARCH_PAGES_START;
-		break;
-	default:
-		return VM_FAULT_SIGBUS;
-	}
-
-	return vmf_insert_pfn(vma, vmf->address, pfn);
-}
-
 struct loongarch_vdso_info vdso_info = {
 	.vdso = vdso_start,
 	.code_mapping = {
 		.name = "[vdso]",
 		.mremap = vdso_mremap,
 	},
-	.data_mapping = {
-		.name = "[vvar]",
-		.fault = vvar_fault,
-	},
 	.offset_sigreturn = vdso_offset_sigreturn,
 };
 
@@ -101,12 +48,15 @@ static int __init init_vdso(void)
 	BUG_ON(!PAGE_ALIGNED(vdso_info.vdso));
 
 	for_each_possible_cpu(cpu)
-		vdso_pdata[cpu].node = cpu_to_node(cpu);
+		vdso_k_arch_data->pdata[cpu].node = cpu_to_node(cpu);
 
 	vdso_info.size = PAGE_ALIGN(vdso_end - vdso_start);
 	vdso_info.code_mapping.pages =
 		kcalloc(vdso_info.size / PAGE_SIZE, sizeof(struct page *), GFP_KERNEL);
 
+	if (!vdso_info.code_mapping.pages)
+		return -ENOMEM;
+
 	pfn = __phys_to_pfn(__pa_symbol(vdso_info.vdso));
 	for (i = 0; i < vdso_info.size / PAGE_SIZE; i++)
 		vdso_info.code_mapping.pages[i] = pfn_to_page(pfn + i);
@@ -115,37 +65,6 @@ static int __init init_vdso(void)
 }
 subsys_initcall(init_vdso);
 
-#ifdef CONFIG_TIME_NS
-struct vdso_data *arch_get_vdso_data(void *vvar_page)
-{
-	return (struct vdso_data *)(vvar_page);
-}
-
-/*
- * The vvar mapping contains data for a specific time namespace, so when a
- * task changes namespace we must unmap its vvar data for the old namespace.
- * Subsequent faults will map in data for the new namespace.
- *
- * For more details see timens_setup_vdso_data().
- */
-int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
-{
-	struct mm_struct *mm = task->mm;
-	struct vm_area_struct *vma;
-
-	VMA_ITERATOR(vmi, mm, 0);
-
-	mmap_read_lock(mm);
-	for_each_vma(vmi, vma) {
-		if (vma_is_special_mapping(vma, &vdso_info.data_mapping))
-			zap_vma_pages(vma);
-	}
-	mmap_read_unlock(mm);
-
-	return 0;
-}
-#endif
-
 static unsigned long vdso_base(void)
 {
 	unsigned long base = STACK_TOP;
@@ -181,9 +100,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 		goto out;
 	}
 
-	vma = _install_special_mapping(mm, data_addr, VVAR_SIZE,
-				       VM_READ | VM_MAYREAD | VM_PFNMAP,
-				       &info->data_mapping);
+	vma = vdso_install_vvar_mapping(mm, data_addr);
 	if (IS_ERR(vma)) {
 		ret = PTR_ERR(vma);
 		goto out;
@@ -191,7 +108,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 
 	vdso_addr = data_addr + VVAR_SIZE;
 	vma = _install_special_mapping(mm, vdso_addr, info->size,
-				       VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+				       VM_READ | VM_EXEC |
+				       VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC |
+				       VM_SEALED_SYSMAP,
 				       &info->code_mapping);
 	if (IS_ERR(vma)) {
 		ret = PTR_ERR(vma);
diff --git a/arch/loongarch/kvm/Kconfig b/arch/loongarch/kvm/Kconfig
index 97a811077ac3..ed4f724db774 100644
--- a/arch/loongarch/kvm/Kconfig
+++ b/arch/loongarch/kvm/Kconfig
@@ -25,14 +25,14 @@ config KVM
 	select HAVE_KVM_IRQCHIP
 	select HAVE_KVM_MSI
 	select HAVE_KVM_READONLY_MEM
-	select HAVE_KVM_VCPU_ASYNC_IOCTL
 	select KVM_COMMON
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_GENERIC_HARDWARE_ENABLING
 	select KVM_GENERIC_MMU_NOTIFIER
 	select KVM_MMIO
-	select KVM_XFER_TO_GUEST_WORK
+	select VIRT_XFER_TO_GUEST_WORK
 	select SCHED_INFO
+	select GUEST_PERF_EVENTS if PERF_EVENTS
 	help
 	  Support hosting virtualized guest machines using
 	  hardware virtualization extensions. You will need
diff --git a/arch/loongarch/kvm/Makefile b/arch/loongarch/kvm/Makefile
index 3a01292f71cc..cb41d9265662 100644
--- a/arch/loongarch/kvm/Makefile
+++ b/arch/loongarch/kvm/Makefile
@@ -3,8 +3,6 @@
 # Makefile for LoongArch KVM support
 #
 
-ccflags-y += -I $(src)
-
 include $(srctree)/virt/kvm/Makefile.kvm
 
 obj-$(CONFIG_KVM) += kvm.o
@@ -23,4 +21,4 @@ kvm-y += intc/eiointc.o
 kvm-y += intc/pch_pic.o
 kvm-y += irqfd.o
 
-CFLAGS_exit.o	+= $(call cc-option,-Wno-override-init,)
+CFLAGS_exit.o	+= $(call cc-disable-warning, override-init)
diff --git a/arch/loongarch/kvm/exit.c b/arch/loongarch/kvm/exit.c
index 69f3e3782cc9..cb493980d874 100644
--- a/arch/loongarch/kvm/exit.c
+++ b/arch/loongarch/kvm/exit.c
@@ -156,7 +156,7 @@ static int kvm_handle_csr(struct kvm_vcpu *vcpu, larch_inst inst)
 
 int kvm_emu_iocsr(larch_inst inst, struct kvm_run *run, struct kvm_vcpu *vcpu)
 {
-	int ret;
+	int idx, ret;
 	unsigned long *val;
 	u32 addr, rd, rj, opcode;
 
@@ -167,7 +167,6 @@ int kvm_emu_iocsr(larch_inst inst, struct kvm_run *run, struct kvm_vcpu *vcpu)
 	rj = inst.reg2_format.rj;
 	opcode = inst.reg2_format.opcode;
 	addr = vcpu->arch.gprs[rj];
-	ret = EMULATE_DO_IOCSR;
 	run->iocsr_io.phys_addr = addr;
 	run->iocsr_io.is_write = 0;
 	val = &vcpu->arch.gprs[rd];
@@ -207,20 +206,28 @@ int kvm_emu_iocsr(larch_inst inst, struct kvm_run *run, struct kvm_vcpu *vcpu)
 	}
 
 	if (run->iocsr_io.is_write) {
-		if (!kvm_io_bus_write(vcpu, KVM_IOCSR_BUS, addr, run->iocsr_io.len, val))
+		idx = srcu_read_lock(&vcpu->kvm->srcu);
+		ret = kvm_io_bus_write(vcpu, KVM_IOCSR_BUS, addr, run->iocsr_io.len, val);
+		srcu_read_unlock(&vcpu->kvm->srcu, idx);
+		if (ret == 0)
 			ret = EMULATE_DONE;
-		else
+		else {
+			ret = EMULATE_DO_IOCSR;
 			/* Save data and let user space to write it */
 			memcpy(run->iocsr_io.data, val, run->iocsr_io.len);
-
+		}
 		trace_kvm_iocsr(KVM_TRACE_IOCSR_WRITE, run->iocsr_io.len, addr, val);
 	} else {
-		if (!kvm_io_bus_read(vcpu, KVM_IOCSR_BUS, addr, run->iocsr_io.len, val))
+		vcpu->arch.io_gpr = rd; /* Set register id for iocsr read completion */
+		idx = srcu_read_lock(&vcpu->kvm->srcu);
+		ret = kvm_io_bus_read(vcpu, KVM_IOCSR_BUS, addr,
+				      run->iocsr_io.len, run->iocsr_io.data);
+		srcu_read_unlock(&vcpu->kvm->srcu, idx);
+		if (ret == 0) {
+			kvm_complete_iocsr_read(vcpu, run);
 			ret = EMULATE_DONE;
-		else
-			/* Save register id for iocsr read completion */
-			vcpu->arch.io_gpr = rd;
-
+		} else
+			ret = EMULATE_DO_IOCSR;
 		trace_kvm_iocsr(KVM_TRACE_IOCSR_READ, run->iocsr_io.len, addr, NULL);
 	}
 
@@ -282,9 +289,11 @@ static int kvm_trap_handle_gspr(struct kvm_vcpu *vcpu)
 	er = EMULATE_FAIL;
 	switch (((inst.word >> 24) & 0xff)) {
 	case 0x0: /* CPUCFG GSPR */
+		trace_kvm_exit_cpucfg(vcpu, KVM_TRACE_EXIT_CPUCFG);
 		er = kvm_emu_cpucfg(vcpu, inst);
 		break;
 	case 0x4: /* CSR{RD,WR,XCHG} GSPR */
+		trace_kvm_exit_csr(vcpu, KVM_TRACE_EXIT_CSR);
 		er = kvm_handle_csr(vcpu, inst);
 		break;
 	case 0x6: /* Cache, Idle and IOCSR GSPR */
@@ -334,7 +343,7 @@ static int kvm_trap_handle_gspr(struct kvm_vcpu *vcpu)
  * 2) Execute CACOP/IDLE instructions;
  * 3) Access to unimplemented CSRs/IOCSRs.
  */
-static int kvm_handle_gspr(struct kvm_vcpu *vcpu)
+static int kvm_handle_gspr(struct kvm_vcpu *vcpu, int ecode)
 {
 	int ret = RESUME_GUEST;
 	enum emulation_result er = EMULATE_DONE;
@@ -359,7 +368,7 @@ static int kvm_handle_gspr(struct kvm_vcpu *vcpu)
 
 int kvm_emu_mmio_read(struct kvm_vcpu *vcpu, larch_inst inst)
 {
-	int ret;
+	int idx, ret;
 	unsigned int op8, opcode, rd;
 	struct kvm_run *run = vcpu->run;
 
@@ -459,21 +468,24 @@ int kvm_emu_mmio_read(struct kvm_vcpu *vcpu, larch_inst inst)
 	if (ret == EMULATE_DO_MMIO) {
 		trace_kvm_mmio(KVM_TRACE_MMIO_READ, run->mmio.len, run->mmio.phys_addr, NULL);
 
+		vcpu->arch.io_gpr = rd; /* Set for kvm_complete_mmio_read() use */
+
 		/*
 		 * If mmio device such as PCH-PIC is emulated in KVM,
 		 * it need not return to user space to handle the mmio
 		 * exception.
 		 */
+		idx = srcu_read_lock(&vcpu->kvm->srcu);
 		ret = kvm_io_bus_read(vcpu, KVM_MMIO_BUS, vcpu->arch.badv,
-				      run->mmio.len, &vcpu->arch.gprs[rd]);
+				      run->mmio.len, run->mmio.data);
+		srcu_read_unlock(&vcpu->kvm->srcu, idx);
 		if (!ret) {
+			kvm_complete_mmio_read(vcpu, run);
 			update_pc(&vcpu->arch);
 			vcpu->mmio_needed = 0;
 			return EMULATE_DONE;
 		}
 
-		/* Set for kvm_complete_mmio_read() use */
-		vcpu->arch.io_gpr = rd;
 		run->mmio.is_write = 0;
 		vcpu->mmio_is_write = 0;
 		return EMULATE_DO_MMIO;
@@ -531,7 +543,7 @@ int kvm_complete_mmio_read(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 int kvm_emu_mmio_write(struct kvm_vcpu *vcpu, larch_inst inst)
 {
-	int ret;
+	int idx, ret;
 	unsigned int rd, op8, opcode;
 	unsigned long curr_pc, rd_val = 0;
 	struct kvm_run *run = vcpu->run;
@@ -631,7 +643,9 @@ int kvm_emu_mmio_write(struct kvm_vcpu *vcpu, larch_inst inst)
 		 * it need not return to user space to handle the mmio
 		 * exception.
 		 */
+		idx = srcu_read_lock(&vcpu->kvm->srcu);
 		ret = kvm_io_bus_write(vcpu, KVM_MMIO_BUS, vcpu->arch.badv, run->mmio.len, data);
+		srcu_read_unlock(&vcpu->kvm->srcu, idx);
 		if (!ret)
 			return EMULATE_DONE;
 
@@ -650,7 +664,7 @@ int kvm_emu_mmio_write(struct kvm_vcpu *vcpu, larch_inst inst)
 	return ret;
 }
 
-static int kvm_handle_rdwr_fault(struct kvm_vcpu *vcpu, bool write)
+static int kvm_handle_rdwr_fault(struct kvm_vcpu *vcpu, bool write, int ecode)
 {
 	int ret;
 	larch_inst inst;
@@ -658,7 +672,13 @@ static int kvm_handle_rdwr_fault(struct kvm_vcpu *vcpu, bool write)
 	struct kvm_run *run = vcpu->run;
 	unsigned long badv = vcpu->arch.badv;
 
-	ret = kvm_handle_mm_fault(vcpu, badv, write);
+	/* Inject ADE exception if exceed max GPA size */
+	if (unlikely(badv >= vcpu->kvm->arch.gpa_size)) {
+		kvm_queue_exception(vcpu, EXCCODE_ADE, EXSUBCODE_ADEM);
+		return RESUME_GUEST;
+	}
+
+	ret = kvm_handle_mm_fault(vcpu, badv, write, ecode);
 	if (ret) {
 		/* Treat as MMIO */
 		inst.word = vcpu->arch.badi;
@@ -688,24 +708,33 @@ static int kvm_handle_rdwr_fault(struct kvm_vcpu *vcpu, bool write)
 	return ret;
 }
 
-static int kvm_handle_read_fault(struct kvm_vcpu *vcpu)
+static int kvm_handle_read_fault(struct kvm_vcpu *vcpu, int ecode)
 {
-	return kvm_handle_rdwr_fault(vcpu, false);
+	return kvm_handle_rdwr_fault(vcpu, false, ecode);
 }
 
-static int kvm_handle_write_fault(struct kvm_vcpu *vcpu)
+static int kvm_handle_write_fault(struct kvm_vcpu *vcpu, int ecode)
 {
-	return kvm_handle_rdwr_fault(vcpu, true);
+	return kvm_handle_rdwr_fault(vcpu, true, ecode);
+}
+
+int kvm_complete_user_service(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	update_pc(&vcpu->arch);
+	kvm_write_reg(vcpu, LOONGARCH_GPR_A0, run->hypercall.ret);
+
+	return 0;
 }
 
 /**
  * kvm_handle_fpu_disabled() - Guest used fpu however it is disabled at host
  * @vcpu:	Virtual CPU context.
+ * @ecode:	Exception code.
  *
  * Handle when the guest attempts to use fpu which hasn't been allowed
  * by the root context.
  */
-static int kvm_handle_fpu_disabled(struct kvm_vcpu *vcpu)
+static int kvm_handle_fpu_disabled(struct kvm_vcpu *vcpu, int ecode)
 {
 	struct kvm_run *run = vcpu->run;
 
@@ -750,19 +779,18 @@ static long kvm_save_notify(struct kvm_vcpu *vcpu)
 		return 0;
 	default:
 		return KVM_HCALL_INVALID_CODE;
-	};
-
-	return KVM_HCALL_INVALID_CODE;
-};
+	}
+}
 
 /*
  * kvm_handle_lsx_disabled() - Guest used LSX while disabled in root.
  * @vcpu:      Virtual CPU context.
+ * @ecode:	Exception code.
  *
  * Handle when the guest attempts to use LSX when it is disabled in the root
  * context.
  */
-static int kvm_handle_lsx_disabled(struct kvm_vcpu *vcpu)
+static int kvm_handle_lsx_disabled(struct kvm_vcpu *vcpu, int ecode)
 {
 	if (kvm_own_lsx(vcpu))
 		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
@@ -773,11 +801,12 @@ static int kvm_handle_lsx_disabled(struct kvm_vcpu *vcpu)
 /*
  * kvm_handle_lasx_disabled() - Guest used LASX while disabled in root.
  * @vcpu:	Virtual CPU context.
+ * @ecode:	Exception code.
  *
  * Handle when the guest attempts to use LASX when it is disabled in the root
  * context.
  */
-static int kvm_handle_lasx_disabled(struct kvm_vcpu *vcpu)
+static int kvm_handle_lasx_disabled(struct kvm_vcpu *vcpu, int ecode)
 {
 	if (kvm_own_lasx(vcpu))
 		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
@@ -785,7 +814,7 @@ static int kvm_handle_lasx_disabled(struct kvm_vcpu *vcpu)
 	return RESUME_GUEST;
 }
 
-static int kvm_handle_lbt_disabled(struct kvm_vcpu *vcpu)
+static int kvm_handle_lbt_disabled(struct kvm_vcpu *vcpu, int ecode)
 {
 	if (kvm_own_lbt(vcpu))
 		kvm_queue_exception(vcpu, EXCCODE_INE, 0);
@@ -793,32 +822,25 @@ static int kvm_handle_lbt_disabled(struct kvm_vcpu *vcpu)
 	return RESUME_GUEST;
 }
 
-static int kvm_send_pv_ipi(struct kvm_vcpu *vcpu)
+static void kvm_send_pv_ipi(struct kvm_vcpu *vcpu)
 {
-	unsigned int min, cpu, i;
-	unsigned long ipi_bitmap;
+	unsigned int min, cpu;
 	struct kvm_vcpu *dest;
+	DECLARE_BITMAP(ipi_bitmap, BITS_PER_LONG * 2) = {
+		kvm_read_reg(vcpu, LOONGARCH_GPR_A1),
+		kvm_read_reg(vcpu, LOONGARCH_GPR_A2)
+	};
 
 	min = kvm_read_reg(vcpu, LOONGARCH_GPR_A3);
-	for (i = 0; i < 2; i++, min += BITS_PER_LONG) {
-		ipi_bitmap = kvm_read_reg(vcpu, LOONGARCH_GPR_A1 + i);
-		if (!ipi_bitmap)
+	for_each_set_bit(cpu, ipi_bitmap, BITS_PER_LONG * 2) {
+		dest = kvm_get_vcpu_by_cpuid(vcpu->kvm, cpu + min);
+		if (!dest)
 			continue;
 
-		cpu = find_first_bit((void *)&ipi_bitmap, BITS_PER_LONG);
-		while (cpu < BITS_PER_LONG) {
-			dest = kvm_get_vcpu_by_cpuid(vcpu->kvm, cpu + min);
-			cpu = find_next_bit((void *)&ipi_bitmap, BITS_PER_LONG, cpu + 1);
-			if (!dest)
-				continue;
-
-			/* Send SWI0 to dest vcpu to emulate IPI interrupt */
-			kvm_queue_irq(dest, INT_SWI0);
-			kvm_vcpu_kick(dest);
-		}
+		/* Send SWI0 to dest vcpu to emulate IPI interrupt */
+		kvm_queue_irq(dest, INT_SWI0);
+		kvm_vcpu_kick(dest);
 	}
-
-	return 0;
 }
 
 /*
@@ -847,7 +869,7 @@ static void kvm_handle_service(struct kvm_vcpu *vcpu)
 	kvm_write_reg(vcpu, LOONGARCH_GPR_A0, ret);
 }
 
-static int kvm_handle_hypercall(struct kvm_vcpu *vcpu)
+static int kvm_handle_hypercall(struct kvm_vcpu *vcpu, int ecode)
 {
 	int ret;
 	larch_inst inst;
@@ -862,6 +884,28 @@ static int kvm_handle_hypercall(struct kvm_vcpu *vcpu)
 		vcpu->stat.hypercall_exits++;
 		kvm_handle_service(vcpu);
 		break;
+	case KVM_HCALL_USER_SERVICE:
+		if (!kvm_guest_has_pv_feature(vcpu, KVM_FEATURE_USER_HCALL)) {
+			kvm_write_reg(vcpu, LOONGARCH_GPR_A0, KVM_HCALL_INVALID_CODE);
+			break;
+		}
+
+		vcpu->stat.hypercall_exits++;
+		vcpu->run->exit_reason = KVM_EXIT_HYPERCALL;
+		vcpu->run->hypercall.nr = KVM_HCALL_USER_SERVICE;
+		vcpu->run->hypercall.args[0] = kvm_read_reg(vcpu, LOONGARCH_GPR_A0);
+		vcpu->run->hypercall.args[1] = kvm_read_reg(vcpu, LOONGARCH_GPR_A1);
+		vcpu->run->hypercall.args[2] = kvm_read_reg(vcpu, LOONGARCH_GPR_A2);
+		vcpu->run->hypercall.args[3] = kvm_read_reg(vcpu, LOONGARCH_GPR_A3);
+		vcpu->run->hypercall.args[4] = kvm_read_reg(vcpu, LOONGARCH_GPR_A4);
+		vcpu->run->hypercall.args[5] = kvm_read_reg(vcpu, LOONGARCH_GPR_A5);
+		vcpu->run->hypercall.flags = 0;
+		/*
+		 * Set invalid return value by default, let user-mode VMM modify it.
+		 */
+		vcpu->run->hypercall.ret = KVM_HCALL_INVALID_CODE;
+		ret = RESUME_HOST;
+		break;
 	case KVM_HCALL_SWDBG:
 		/* KVM_HCALL_SWDBG only in effective when SW_BP is enabled */
 		if (vcpu->guest_debug & KVM_GUESTDBG_SW_BP_MASK) {
@@ -885,16 +929,14 @@ static int kvm_handle_hypercall(struct kvm_vcpu *vcpu)
 /*
  * LoongArch KVM callback handling for unimplemented guest exiting
  */
-static int kvm_fault_ni(struct kvm_vcpu *vcpu)
+static int kvm_fault_ni(struct kvm_vcpu *vcpu, int ecode)
 {
-	unsigned int ecode, inst;
-	unsigned long estat, badv;
+	unsigned int inst;
+	unsigned long badv;
 
 	/* Fetch the instruction */
 	inst = vcpu->arch.badi;
 	badv = vcpu->arch.badv;
-	estat = vcpu->arch.host_estat;
-	ecode = (estat & CSR_ESTAT_EXC) >> CSR_ESTAT_EXC_SHIFT;
 	kvm_err("ECode: %d PC=%#lx Inst=0x%08x BadVaddr=%#lx ESTAT=%#lx\n",
 			ecode, vcpu->arch.pc, inst, badv, read_gcsr_estat());
 	kvm_arch_vcpu_dump_regs(vcpu);
@@ -919,5 +961,5 @@ static exit_handle_fn kvm_fault_tables[EXCCODE_INT_START] = {
 
 int kvm_handle_fault(struct kvm_vcpu *vcpu, int fault)
 {
-	return kvm_fault_tables[fault](vcpu);
+	return kvm_fault_tables[fault](vcpu, fault);
 }
diff --git a/arch/loongarch/kvm/intc/eiointc.c b/arch/loongarch/kvm/intc/eiointc.c
index f39929d7bf8a..29886876143f 100644
--- a/arch/loongarch/kvm/intc/eiointc.c
+++ b/arch/loongarch/kvm/intc/eiointc.c
@@ -9,52 +9,58 @@
 
 static void eiointc_set_sw_coreisr(struct loongarch_eiointc *s)
 {
-	int ipnum, cpu, irq_index, irq_mask, irq;
+	int ipnum, cpu, cpuid, irq;
+	struct kvm_vcpu *vcpu;
 
 	for (irq = 0; irq < EIOINTC_IRQS; irq++) {
-		ipnum = s->ipmap.reg_u8[irq / 32];
+		ipnum = (s->ipmap >> (irq / 32 * 8)) & 0xff;
 		if (!(s->status & BIT(EIOINTC_ENABLE_INT_ENCODE))) {
 			ipnum = count_trailing_zeros(ipnum);
 			ipnum = (ipnum >= 0 && ipnum < 4) ? ipnum : 0;
 		}
-		irq_index = irq / 32;
-		irq_mask = BIT(irq & 0x1f);
 
-		cpu = s->coremap.reg_u8[irq];
-		if (!!(s->coreisr.reg_u32[cpu][irq_index] & irq_mask))
-			set_bit(irq, s->sw_coreisr[cpu][ipnum]);
+		cpuid = ((u8 *)s->coremap)[irq];
+		vcpu = kvm_get_vcpu_by_cpuid(s->kvm, cpuid);
+		if (!vcpu)
+			continue;
+
+		cpu = vcpu->vcpu_id;
+		if (test_bit(irq, (unsigned long *)s->coreisr[cpu]))
+			__set_bit(irq, s->sw_coreisr[cpu][ipnum]);
 		else
-			clear_bit(irq, s->sw_coreisr[cpu][ipnum]);
+			__clear_bit(irq, s->sw_coreisr[cpu][ipnum]);
 	}
 }
 
 static void eiointc_update_irq(struct loongarch_eiointc *s, int irq, int level)
 {
-	int ipnum, cpu, found, irq_index, irq_mask;
+	int ipnum, cpu, found;
 	struct kvm_vcpu *vcpu;
 	struct kvm_interrupt vcpu_irq;
 
-	ipnum = s->ipmap.reg_u8[irq / 32];
+	ipnum = (s->ipmap >> (irq / 32 * 8)) & 0xff;
 	if (!(s->status & BIT(EIOINTC_ENABLE_INT_ENCODE))) {
 		ipnum = count_trailing_zeros(ipnum);
 		ipnum = (ipnum >= 0 && ipnum < 4) ? ipnum : 0;
 	}
 
 	cpu = s->sw_coremap[irq];
-	vcpu = kvm_get_vcpu(s->kvm, cpu);
-	irq_index = irq / 32;
-	irq_mask = BIT(irq & 0x1f);
+	vcpu = kvm_get_vcpu_by_id(s->kvm, cpu);
+	if (unlikely(vcpu == NULL)) {
+		kvm_err("%s: invalid target cpu: %d\n", __func__, cpu);
+		return;
+	}
 
 	if (level) {
 		/* if not enable return false */
-		if (((s->enable.reg_u32[irq_index]) & irq_mask) == 0)
+		if (!test_bit(irq, (unsigned long *)s->enable))
 			return;
-		s->coreisr.reg_u32[cpu][irq_index] |= irq_mask;
+		__set_bit(irq, (unsigned long *)s->coreisr[cpu]);
 		found = find_first_bit(s->sw_coreisr[cpu][ipnum], EIOINTC_IRQS);
-		set_bit(irq, s->sw_coreisr[cpu][ipnum]);
+		__set_bit(irq, s->sw_coreisr[cpu][ipnum]);
 	} else {
-		s->coreisr.reg_u32[cpu][irq_index] &= ~irq_mask;
-		clear_bit(irq, s->sw_coreisr[cpu][ipnum]);
+		__clear_bit(irq, (unsigned long *)s->coreisr[cpu]);
+		__clear_bit(irq, s->sw_coreisr[cpu][ipnum]);
 		found = find_first_bit(s->sw_coreisr[cpu][ipnum], EIOINTC_IRQS);
 	}
 
@@ -66,24 +72,29 @@ static void eiointc_update_irq(struct loongarch_eiointc *s, int irq, int level)
 }
 
 static inline void eiointc_update_sw_coremap(struct loongarch_eiointc *s,
-					int irq, void *pvalue, u32 len, bool notify)
+					int irq, u64 val, u32 len, bool notify)
 {
-	int i, cpu;
-	u64 val = *(u64 *)pvalue;
+	int i, cpu, cpuid;
+	struct kvm_vcpu *vcpu;
 
 	for (i = 0; i < len; i++) {
-		cpu = val & 0xff;
+		cpuid = val & 0xff;
 		val = val >> 8;
 
 		if (!(s->status & BIT(EIOINTC_ENABLE_CPU_ENCODE))) {
-			cpu = ffs(cpu) - 1;
-			cpu = (cpu >= 4) ? 0 : cpu;
+			cpuid = ffs(cpuid) - 1;
+			cpuid = (cpuid >= 4) ? 0 : cpuid;
 		}
 
+		vcpu = kvm_get_vcpu_by_cpuid(s->kvm, cpuid);
+		if (!vcpu)
+			continue;
+
+		cpu = vcpu->vcpu_id;
 		if (s->sw_coremap[irq + i] == cpu)
 			continue;
 
-		if (notify && test_bit(irq + i, (unsigned long *)s->isr.reg_u8)) {
+		if (notify && test_bit(irq + i, (unsigned long *)s->isr)) {
 			/* lower irq at old cpu and raise irq at new cpu */
 			eiointc_update_irq(s, irq + i, 0);
 			s->sw_coremap[irq + i] = cpu;
@@ -97,161 +108,16 @@ static inline void eiointc_update_sw_coremap(struct loongarch_eiointc *s,
 void eiointc_set_irq(struct loongarch_eiointc *s, int irq, int level)
 {
 	unsigned long flags;
-	unsigned long *isr = (unsigned long *)s->isr.reg_u8;
+	unsigned long *isr = (unsigned long *)s->isr;
 
-	level ? set_bit(irq, isr) : clear_bit(irq, isr);
 	spin_lock_irqsave(&s->lock, flags);
+	level ? __set_bit(irq, isr) : __clear_bit(irq, isr);
 	eiointc_update_irq(s, irq, level);
 	spin_unlock_irqrestore(&s->lock, flags);
 }
 
-static inline void eiointc_enable_irq(struct kvm_vcpu *vcpu,
-		struct loongarch_eiointc *s, int index, u8 mask, int level)
-{
-	u8 val;
-	int irq;
-
-	val = mask & s->isr.reg_u8[index];
-	irq = ffs(val);
-	while (irq != 0) {
-		/*
-		 * enable bit change from 0 to 1,
-		 * need to update irq by pending bits
-		 */
-		eiointc_update_irq(s, irq - 1 + index * 8, level);
-		val &= ~BIT(irq - 1);
-		irq = ffs(val);
-	}
-}
-
-static int loongarch_eiointc_readb(struct kvm_vcpu *vcpu, struct loongarch_eiointc *s,
-				gpa_t addr, int len, void *val)
-{
-	int index, ret = 0;
-	u8 data = 0;
-	gpa_t offset;
-
-	offset = addr - EIOINTC_BASE;
-	switch (offset) {
-	case EIOINTC_NODETYPE_START ... EIOINTC_NODETYPE_END:
-		index = offset - EIOINTC_NODETYPE_START;
-		data = s->nodetype.reg_u8[index];
-		break;
-	case EIOINTC_IPMAP_START ... EIOINTC_IPMAP_END:
-		index = offset - EIOINTC_IPMAP_START;
-		data = s->ipmap.reg_u8[index];
-		break;
-	case EIOINTC_ENABLE_START ... EIOINTC_ENABLE_END:
-		index = offset - EIOINTC_ENABLE_START;
-		data = s->enable.reg_u8[index];
-		break;
-	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
-		index = offset - EIOINTC_BOUNCE_START;
-		data = s->bounce.reg_u8[index];
-		break;
-	case EIOINTC_COREISR_START ... EIOINTC_COREISR_END:
-		index = offset - EIOINTC_COREISR_START;
-		data = s->coreisr.reg_u8[vcpu->vcpu_id][index];
-		break;
-	case EIOINTC_COREMAP_START ... EIOINTC_COREMAP_END:
-		index = offset - EIOINTC_COREMAP_START;
-		data = s->coremap.reg_u8[index];
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	*(u8 *)val = data;
-
-	return ret;
-}
-
-static int loongarch_eiointc_readw(struct kvm_vcpu *vcpu, struct loongarch_eiointc *s,
-				gpa_t addr, int len, void *val)
-{
-	int index, ret = 0;
-	u16 data = 0;
-	gpa_t offset;
-
-	offset = addr - EIOINTC_BASE;
-	switch (offset) {
-	case EIOINTC_NODETYPE_START ... EIOINTC_NODETYPE_END:
-		index = (offset - EIOINTC_NODETYPE_START) >> 1;
-		data = s->nodetype.reg_u16[index];
-		break;
-	case EIOINTC_IPMAP_START ... EIOINTC_IPMAP_END:
-		index = (offset - EIOINTC_IPMAP_START) >> 1;
-		data = s->ipmap.reg_u16[index];
-		break;
-	case EIOINTC_ENABLE_START ... EIOINTC_ENABLE_END:
-		index = (offset - EIOINTC_ENABLE_START) >> 1;
-		data = s->enable.reg_u16[index];
-		break;
-	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
-		index = (offset - EIOINTC_BOUNCE_START) >> 1;
-		data = s->bounce.reg_u16[index];
-		break;
-	case EIOINTC_COREISR_START ... EIOINTC_COREISR_END:
-		index = (offset - EIOINTC_COREISR_START) >> 1;
-		data = s->coreisr.reg_u16[vcpu->vcpu_id][index];
-		break;
-	case EIOINTC_COREMAP_START ... EIOINTC_COREMAP_END:
-		index = (offset - EIOINTC_COREMAP_START) >> 1;
-		data = s->coremap.reg_u16[index];
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	*(u16 *)val = data;
-
-	return ret;
-}
-
-static int loongarch_eiointc_readl(struct kvm_vcpu *vcpu, struct loongarch_eiointc *s,
-				gpa_t addr, int len, void *val)
-{
-	int index, ret = 0;
-	u32 data = 0;
-	gpa_t offset;
-
-	offset = addr - EIOINTC_BASE;
-	switch (offset) {
-	case EIOINTC_NODETYPE_START ... EIOINTC_NODETYPE_END:
-		index = (offset - EIOINTC_NODETYPE_START) >> 2;
-		data = s->nodetype.reg_u32[index];
-		break;
-	case EIOINTC_IPMAP_START ... EIOINTC_IPMAP_END:
-		index = (offset - EIOINTC_IPMAP_START) >> 2;
-		data = s->ipmap.reg_u32[index];
-		break;
-	case EIOINTC_ENABLE_START ... EIOINTC_ENABLE_END:
-		index = (offset - EIOINTC_ENABLE_START) >> 2;
-		data = s->enable.reg_u32[index];
-		break;
-	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
-		index = (offset - EIOINTC_BOUNCE_START) >> 2;
-		data = s->bounce.reg_u32[index];
-		break;
-	case EIOINTC_COREISR_START ... EIOINTC_COREISR_END:
-		index = (offset - EIOINTC_COREISR_START) >> 2;
-		data = s->coreisr.reg_u32[vcpu->vcpu_id][index];
-		break;
-	case EIOINTC_COREMAP_START ... EIOINTC_COREMAP_END:
-		index = (offset - EIOINTC_COREMAP_START) >> 2;
-		data = s->coremap.reg_u32[index];
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	*(u32 *)val = data;
-
-	return ret;
-}
-
-static int loongarch_eiointc_readq(struct kvm_vcpu *vcpu, struct loongarch_eiointc *s,
-				gpa_t addr, int len, void *val)
+static int loongarch_eiointc_read(struct kvm_vcpu *vcpu, struct loongarch_eiointc *s,
+				gpa_t addr, unsigned long *val)
 {
 	int index, ret = 0;
 	u64 data = 0;
@@ -261,33 +127,33 @@ static int loongarch_eiointc_readq(struct kvm_vcpu *vcpu, struct loongarch_eioin
 	switch (offset) {
 	case EIOINTC_NODETYPE_START ... EIOINTC_NODETYPE_END:
 		index = (offset - EIOINTC_NODETYPE_START) >> 3;
-		data = s->nodetype.reg_u64[index];
+		data = s->nodetype[index];
 		break;
 	case EIOINTC_IPMAP_START ... EIOINTC_IPMAP_END:
 		index = (offset - EIOINTC_IPMAP_START) >> 3;
-		data = s->ipmap.reg_u64;
+		data = s->ipmap;
 		break;
 	case EIOINTC_ENABLE_START ... EIOINTC_ENABLE_END:
 		index = (offset - EIOINTC_ENABLE_START) >> 3;
-		data = s->enable.reg_u64[index];
+		data = s->enable[index];
 		break;
 	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
 		index = (offset - EIOINTC_BOUNCE_START) >> 3;
-		data = s->bounce.reg_u64[index];
+		data = s->bounce[index];
 		break;
 	case EIOINTC_COREISR_START ... EIOINTC_COREISR_END:
 		index = (offset - EIOINTC_COREISR_START) >> 3;
-		data = s->coreisr.reg_u64[vcpu->vcpu_id][index];
+		data = s->coreisr[vcpu->vcpu_id][index];
 		break;
 	case EIOINTC_COREMAP_START ... EIOINTC_COREMAP_END:
 		index = (offset - EIOINTC_COREMAP_START) >> 3;
-		data = s->coremap.reg_u64[index];
+		data = s->coremap[index];
 		break;
 	default:
 		ret = -EINVAL;
 		break;
 	}
-	*(u64 *)val = data;
+	*val = data;
 
 	return ret;
 }
@@ -297,7 +163,7 @@ static int kvm_eiointc_read(struct kvm_vcpu *vcpu,
 			gpa_t addr, int len, void *val)
 {
 	int ret = -EINVAL;
-	unsigned long flags;
+	unsigned long flags, data, offset;
 	struct loongarch_eiointc *eiointc = vcpu->kvm->arch.eiointc;
 
 	if (!eiointc) {
@@ -305,358 +171,120 @@ static int kvm_eiointc_read(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 	}
 
-	vcpu->kvm->stat.eiointc_read_exits++;
+	if (addr & (len - 1)) {
+		kvm_err("%s: eiointc not aligned addr %llx len %d\n", __func__, addr, len);
+		return -EINVAL;
+	}
+
+	offset = addr & 0x7;
+	addr -= offset;
+	vcpu->stat.eiointc_read_exits++;
 	spin_lock_irqsave(&eiointc->lock, flags);
+	ret = loongarch_eiointc_read(vcpu, eiointc, addr, &data);
+	spin_unlock_irqrestore(&eiointc->lock, flags);
+	if (ret)
+		return ret;
+
+	data = data >> (offset * 8);
 	switch (len) {
 	case 1:
-		ret = loongarch_eiointc_readb(vcpu, eiointc, addr, len, val);
+		*(long *)val = (s8)data;
 		break;
 	case 2:
-		ret = loongarch_eiointc_readw(vcpu, eiointc, addr, len, val);
+		*(long *)val = (s16)data;
 		break;
 	case 4:
-		ret = loongarch_eiointc_readl(vcpu, eiointc, addr, len, val);
-		break;
-	case 8:
-		ret = loongarch_eiointc_readq(vcpu, eiointc, addr, len, val);
+		*(long *)val = (s32)data;
 		break;
 	default:
-		WARN_ONCE(1, "%s: Abnormal address access: addr 0x%llx, size %d\n",
-						__func__, addr, len);
-	}
-	spin_unlock_irqrestore(&eiointc->lock, flags);
-
-	return ret;
-}
-
-static int loongarch_eiointc_writeb(struct kvm_vcpu *vcpu,
-				struct loongarch_eiointc *s,
-				gpa_t addr, int len, const void *val)
-{
-	int index, irq, bits, ret = 0;
-	u8 cpu;
-	u8 data, old_data;
-	u8 coreisr, old_coreisr;
-	gpa_t offset;
-
-	data = *(u8 *)val;
-	offset = addr - EIOINTC_BASE;
-
-	switch (offset) {
-	case EIOINTC_NODETYPE_START ... EIOINTC_NODETYPE_END:
-		index = (offset - EIOINTC_NODETYPE_START);
-		s->nodetype.reg_u8[index] = data;
-		break;
-	case EIOINTC_IPMAP_START ... EIOINTC_IPMAP_END:
-		/*
-		 * ipmap cannot be set at runtime, can be set only at the beginning
-		 * of irqchip driver, need not update upper irq level
-		 */
-		index = (offset - EIOINTC_IPMAP_START);
-		s->ipmap.reg_u8[index] = data;
-		break;
-	case EIOINTC_ENABLE_START ... EIOINTC_ENABLE_END:
-		index = (offset - EIOINTC_ENABLE_START);
-		old_data = s->enable.reg_u8[index];
-		s->enable.reg_u8[index] = data;
-		/*
-		 * 1: enable irq.
-		 * update irq when isr is set.
-		 */
-		data = s->enable.reg_u8[index] & ~old_data & s->isr.reg_u8[index];
-		eiointc_enable_irq(vcpu, s, index, data, 1);
-		/*
-		 * 0: disable irq.
-		 * update irq when isr is set.
-		 */
-		data = ~s->enable.reg_u8[index] & old_data & s->isr.reg_u8[index];
-		eiointc_enable_irq(vcpu, s, index, data, 0);
-		break;
-	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
-		/* do not emulate hw bounced irq routing */
-		index = offset - EIOINTC_BOUNCE_START;
-		s->bounce.reg_u8[index] = data;
-		break;
-	case EIOINTC_COREISR_START ... EIOINTC_COREISR_END:
-		index = (offset - EIOINTC_COREISR_START);
-		/* use attrs to get current cpu index */
-		cpu = vcpu->vcpu_id;
-		coreisr = data;
-		old_coreisr = s->coreisr.reg_u8[cpu][index];
-		/* write 1 to clear interrupt */
-		s->coreisr.reg_u8[cpu][index] = old_coreisr & ~coreisr;
-		coreisr &= old_coreisr;
-		bits = sizeof(data) * 8;
-		irq = find_first_bit((void *)&coreisr, bits);
-		while (irq < bits) {
-			eiointc_update_irq(s, irq + index * bits, 0);
-			bitmap_clear((void *)&coreisr, irq, 1);
-			irq = find_first_bit((void *)&coreisr, bits);
-		}
-		break;
-	case EIOINTC_COREMAP_START ... EIOINTC_COREMAP_END:
-		irq = offset - EIOINTC_COREMAP_START;
-		index = irq;
-		s->coremap.reg_u8[index] = data;
-		eiointc_update_sw_coremap(s, irq, (void *)&data, sizeof(data), true);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-static int loongarch_eiointc_writew(struct kvm_vcpu *vcpu,
-				struct loongarch_eiointc *s,
-				gpa_t addr, int len, const void *val)
-{
-	int i, index, irq, bits, ret = 0;
-	u8 cpu;
-	u16 data, old_data;
-	u16 coreisr, old_coreisr;
-	gpa_t offset;
-
-	data = *(u16 *)val;
-	offset = addr - EIOINTC_BASE;
-
-	switch (offset) {
-	case EIOINTC_NODETYPE_START ... EIOINTC_NODETYPE_END:
-		index = (offset - EIOINTC_NODETYPE_START) >> 1;
-		s->nodetype.reg_u16[index] = data;
-		break;
-	case EIOINTC_IPMAP_START ... EIOINTC_IPMAP_END:
-		/*
-		 * ipmap cannot be set at runtime, can be set only at the beginning
-		 * of irqchip driver, need not update upper irq level
-		 */
-		index = (offset - EIOINTC_IPMAP_START) >> 1;
-		s->ipmap.reg_u16[index] = data;
-		break;
-	case EIOINTC_ENABLE_START ... EIOINTC_ENABLE_END:
-		index = (offset - EIOINTC_ENABLE_START) >> 1;
-		old_data = s->enable.reg_u32[index];
-		s->enable.reg_u16[index] = data;
-		/*
-		 * 1: enable irq.
-		 * update irq when isr is set.
-		 */
-		data = s->enable.reg_u16[index] & ~old_data & s->isr.reg_u16[index];
-		index = index << 1;
-		for (i = 0; i < sizeof(data); i++) {
-			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index + i, mask, 1);
-		}
-		/*
-		 * 0: disable irq.
-		 * update irq when isr is set.
-		 */
-		data = ~s->enable.reg_u16[index] & old_data & s->isr.reg_u16[index];
-		for (i = 0; i < sizeof(data); i++) {
-			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index, mask, 0);
-		}
-		break;
-	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
-		/* do not emulate hw bounced irq routing */
-		index = (offset - EIOINTC_BOUNCE_START) >> 1;
-		s->bounce.reg_u16[index] = data;
-		break;
-	case EIOINTC_COREISR_START ... EIOINTC_COREISR_END:
-		index = (offset - EIOINTC_COREISR_START) >> 1;
-		/* use attrs to get current cpu index */
-		cpu = vcpu->vcpu_id;
-		coreisr = data;
-		old_coreisr = s->coreisr.reg_u16[cpu][index];
-		/* write 1 to clear interrupt */
-		s->coreisr.reg_u16[cpu][index] = old_coreisr & ~coreisr;
-		coreisr &= old_coreisr;
-		bits = sizeof(data) * 8;
-		irq = find_first_bit((void *)&coreisr, bits);
-		while (irq < bits) {
-			eiointc_update_irq(s, irq + index * bits, 0);
-			bitmap_clear((void *)&coreisr, irq, 1);
-			irq = find_first_bit((void *)&coreisr, bits);
-		}
-		break;
-	case EIOINTC_COREMAP_START ... EIOINTC_COREMAP_END:
-		irq = offset - EIOINTC_COREMAP_START;
-		index = irq >> 1;
-		s->coremap.reg_u16[index] = data;
-		eiointc_update_sw_coremap(s, irq, (void *)&data, sizeof(data), true);
-		break;
-	default:
-		ret = -EINVAL;
+		*(long *)val = (long)data;
 		break;
 	}
 
-	return ret;
+	return 0;
 }
 
-static int loongarch_eiointc_writel(struct kvm_vcpu *vcpu,
+static int loongarch_eiointc_write(struct kvm_vcpu *vcpu,
 				struct loongarch_eiointc *s,
-				gpa_t addr, int len, const void *val)
+				gpa_t addr, u64 value, u64 field_mask)
 {
-	int i, index, irq, bits, ret = 0;
+	int index, irq, ret = 0;
 	u8 cpu;
-	u32 data, old_data;
-	u32 coreisr, old_coreisr;
+	u64 data, old, mask;
 	gpa_t offset;
 
-	data = *(u32 *)val;
-	offset = addr - EIOINTC_BASE;
-
-	switch (offset) {
-	case EIOINTC_NODETYPE_START ... EIOINTC_NODETYPE_END:
-		index = (offset - EIOINTC_NODETYPE_START) >> 2;
-		s->nodetype.reg_u32[index] = data;
-		break;
-	case EIOINTC_IPMAP_START ... EIOINTC_IPMAP_END:
-		/*
-		 * ipmap cannot be set at runtime, can be set only at the beginning
-		 * of irqchip driver, need not update upper irq level
-		 */
-		index = (offset - EIOINTC_IPMAP_START) >> 2;
-		s->ipmap.reg_u32[index] = data;
-		break;
-	case EIOINTC_ENABLE_START ... EIOINTC_ENABLE_END:
-		index = (offset - EIOINTC_ENABLE_START) >> 2;
-		old_data = s->enable.reg_u32[index];
-		s->enable.reg_u32[index] = data;
-		/*
-		 * 1: enable irq.
-		 * update irq when isr is set.
-		 */
-		data = s->enable.reg_u32[index] & ~old_data & s->isr.reg_u32[index];
-		index = index << 2;
-		for (i = 0; i < sizeof(data); i++) {
-			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index + i, mask, 1);
-		}
-		/*
-		 * 0: disable irq.
-		 * update irq when isr is set.
-		 */
-		data = ~s->enable.reg_u32[index] & old_data & s->isr.reg_u32[index];
-		for (i = 0; i < sizeof(data); i++) {
-			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index, mask, 0);
-		}
-		break;
-	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
-		/* do not emulate hw bounced irq routing */
-		index = (offset - EIOINTC_BOUNCE_START) >> 2;
-		s->bounce.reg_u32[index] = data;
-		break;
-	case EIOINTC_COREISR_START ... EIOINTC_COREISR_END:
-		index = (offset - EIOINTC_COREISR_START) >> 2;
-		/* use attrs to get current cpu index */
-		cpu = vcpu->vcpu_id;
-		coreisr = data;
-		old_coreisr = s->coreisr.reg_u32[cpu][index];
-		/* write 1 to clear interrupt */
-		s->coreisr.reg_u32[cpu][index] = old_coreisr & ~coreisr;
-		coreisr &= old_coreisr;
-		bits = sizeof(data) * 8;
-		irq = find_first_bit((void *)&coreisr, bits);
-		while (irq < bits) {
-			eiointc_update_irq(s, irq + index * bits, 0);
-			bitmap_clear((void *)&coreisr, irq, 1);
-			irq = find_first_bit((void *)&coreisr, bits);
-		}
-		break;
-	case EIOINTC_COREMAP_START ... EIOINTC_COREMAP_END:
-		irq = offset - EIOINTC_COREMAP_START;
-		index = irq >> 2;
-		s->coremap.reg_u32[index] = data;
-		eiointc_update_sw_coremap(s, irq, (void *)&data, sizeof(data), true);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	return ret;
-}
-
-static int loongarch_eiointc_writeq(struct kvm_vcpu *vcpu,
-				struct loongarch_eiointc *s,
-				gpa_t addr, int len, const void *val)
-{
-	int i, index, irq, bits, ret = 0;
-	u8 cpu;
-	u64 data, old_data;
-	u64 coreisr, old_coreisr;
-	gpa_t offset;
+	offset = addr & 7;
+	mask = field_mask << (offset * 8);
+	data = (value & field_mask) << (offset * 8);
 
-	data = *(u64 *)val;
+	addr -= offset;
 	offset = addr - EIOINTC_BASE;
 
 	switch (offset) {
 	case EIOINTC_NODETYPE_START ... EIOINTC_NODETYPE_END:
 		index = (offset - EIOINTC_NODETYPE_START) >> 3;
-		s->nodetype.reg_u64[index] = data;
+		old = s->nodetype[index];
+		s->nodetype[index] = (old & ~mask) | data;
 		break;
 	case EIOINTC_IPMAP_START ... EIOINTC_IPMAP_END:
 		/*
 		 * ipmap cannot be set at runtime, can be set only at the beginning
 		 * of irqchip driver, need not update upper irq level
 		 */
-		index = (offset - EIOINTC_IPMAP_START) >> 3;
-		s->ipmap.reg_u64 = data;
+		old = s->ipmap;
+		s->ipmap = (old & ~mask) | data;
 		break;
 	case EIOINTC_ENABLE_START ... EIOINTC_ENABLE_END:
 		index = (offset - EIOINTC_ENABLE_START) >> 3;
-		old_data = s->enable.reg_u64[index];
-		s->enable.reg_u64[index] = data;
+		old = s->enable[index];
+		s->enable[index] = (old & ~mask) | data;
 		/*
 		 * 1: enable irq.
 		 * update irq when isr is set.
 		 */
-		data = s->enable.reg_u64[index] & ~old_data & s->isr.reg_u64[index];
-		index = index << 3;
-		for (i = 0; i < sizeof(data); i++) {
-			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index + i, mask, 1);
+		data = s->enable[index] & ~old & s->isr[index];
+		while (data) {
+			irq = __ffs(data);
+			eiointc_update_irq(s, irq + index * 64, 1);
+			data &= ~BIT_ULL(irq);
 		}
 		/*
 		 * 0: disable irq.
 		 * update irq when isr is set.
 		 */
-		data = ~s->enable.reg_u64[index] & old_data & s->isr.reg_u64[index];
-		for (i = 0; i < sizeof(data); i++) {
-			u8 mask = (data >> (i * 8)) & 0xff;
-			eiointc_enable_irq(vcpu, s, index, mask, 0);
+		data = ~s->enable[index] & old & s->isr[index];
+		while (data) {
+			irq = __ffs(data);
+			eiointc_update_irq(s, irq + index * 64, 0);
+			data &= ~BIT_ULL(irq);
 		}
 		break;
 	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
 		/* do not emulate hw bounced irq routing */
 		index = (offset - EIOINTC_BOUNCE_START) >> 3;
-		s->bounce.reg_u64[index] = data;
+		old = s->bounce[index];
+		s->bounce[index] = (old & ~mask) | data;
 		break;
 	case EIOINTC_COREISR_START ... EIOINTC_COREISR_END:
 		index = (offset - EIOINTC_COREISR_START) >> 3;
 		/* use attrs to get current cpu index */
 		cpu = vcpu->vcpu_id;
-		coreisr = data;
-		old_coreisr = s->coreisr.reg_u64[cpu][index];
+		old = s->coreisr[cpu][index];
 		/* write 1 to clear interrupt */
-		s->coreisr.reg_u64[cpu][index] = old_coreisr & ~coreisr;
-		coreisr &= old_coreisr;
-		bits = sizeof(data) * 8;
-		irq = find_first_bit((void *)&coreisr, bits);
-		while (irq < bits) {
-			eiointc_update_irq(s, irq + index * bits, 0);
-			bitmap_clear((void *)&coreisr, irq, 1);
-			irq = find_first_bit((void *)&coreisr, bits);
+		s->coreisr[cpu][index] = old & ~data;
+		data &= old;
+		while (data) {
+			irq = __ffs(data);
+			eiointc_update_irq(s, irq + index * 64, 0);
+			data &= ~BIT_ULL(irq);
 		}
 		break;
 	case EIOINTC_COREMAP_START ... EIOINTC_COREMAP_END:
-		irq = offset - EIOINTC_COREMAP_START;
-		index = irq >> 3;
-		s->coremap.reg_u64[index] = data;
-		eiointc_update_sw_coremap(s, irq, (void *)&data, sizeof(data), true);
+		index = (offset - EIOINTC_COREMAP_START) >> 3;
+		old = s->coremap[index];
+		s->coremap[index] = (old & ~mask) | data;
+		data = s->coremap[index];
+		eiointc_update_sw_coremap(s, index * 8, data, sizeof(data), true);
 		break;
 	default:
 		ret = -EINVAL;
@@ -671,7 +299,7 @@ static int kvm_eiointc_write(struct kvm_vcpu *vcpu,
 			gpa_t addr, int len, const void *val)
 {
 	int ret = -EINVAL;
-	unsigned long flags;
+	unsigned long flags, value;
 	struct loongarch_eiointc *eiointc = vcpu->kvm->arch.eiointc;
 
 	if (!eiointc) {
@@ -679,24 +307,30 @@ static int kvm_eiointc_write(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 	}
 
-	vcpu->kvm->stat.eiointc_write_exits++;
+	if (addr & (len - 1)) {
+		kvm_err("%s: eiointc not aligned addr %llx len %d\n", __func__, addr, len);
+		return -EINVAL;
+	}
+
+	vcpu->stat.eiointc_write_exits++;
 	spin_lock_irqsave(&eiointc->lock, flags);
 	switch (len) {
 	case 1:
-		ret = loongarch_eiointc_writeb(vcpu, eiointc, addr, len, val);
+		value = *(unsigned char *)val;
+		ret = loongarch_eiointc_write(vcpu, eiointc, addr, value, 0xFF);
 		break;
 	case 2:
-		ret = loongarch_eiointc_writew(vcpu, eiointc, addr, len, val);
+		value = *(unsigned short *)val;
+		ret = loongarch_eiointc_write(vcpu, eiointc, addr, value, USHRT_MAX);
 		break;
 	case 4:
-		ret = loongarch_eiointc_writel(vcpu, eiointc, addr, len, val);
-		break;
-	case 8:
-		ret = loongarch_eiointc_writeq(vcpu, eiointc, addr, len, val);
+		value = *(unsigned int *)val;
+		ret = loongarch_eiointc_write(vcpu, eiointc, addr, value, UINT_MAX);
 		break;
 	default:
-		WARN_ONCE(1, "%s: Abnormal address access: addr 0x%llx, size %d\n",
-						__func__, addr, len);
+		value = *(unsigned long *)val;
+		ret = loongarch_eiointc_write(vcpu, eiointc, addr, value, ULONG_MAX);
+		break;
 	}
 	spin_unlock_irqrestore(&eiointc->lock, flags);
 
@@ -787,29 +421,40 @@ static int kvm_eiointc_ctrl_access(struct kvm_device *dev,
 	int ret = 0;
 	unsigned long flags;
 	unsigned long type = (unsigned long)attr->attr;
-	u32 i, start_irq;
+	u32 i, start_irq, val;
 	void __user *data;
 	struct loongarch_eiointc *s = dev->kvm->arch.eiointc;
 
 	data = (void __user *)attr->addr;
+	switch (type) {
+	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_NUM_CPU:
+	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_FEATURE:
+		if (copy_from_user(&val, data, 4))
+			return -EFAULT;
+		break;
+	default:
+		break;
+	}
+
 	spin_lock_irqsave(&s->lock, flags);
 	switch (type) {
 	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_NUM_CPU:
-		if (copy_from_user(&s->num_cpu, data, 4))
-			ret = -EFAULT;
+		if (val > EIOINTC_ROUTE_MAX_VCPUS)
+			ret = -EINVAL;
+		else
+			s->num_cpu = val;
 		break;
 	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_FEATURE:
-		if (copy_from_user(&s->features, data, 4))
-			ret = -EFAULT;
+		s->features = val;
 		if (!(s->features & BIT(EIOINTC_HAS_VIRT_EXTENSION)))
 			s->status |= BIT(EIOINTC_ENABLE);
 		break;
 	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_LOAD_FINISHED:
 		eiointc_set_sw_coreisr(s);
-		for (i = 0; i < (EIOINTC_IRQS / 4); i++) {
-			start_irq = i * 4;
+		for (i = 0; i < (EIOINTC_IRQS / 8); i++) {
+			start_irq = i * 8;
 			eiointc_update_sw_coremap(s, start_irq,
-					(void *)&s->coremap.reg_u32[i], sizeof(u32), false);
+					s->coremap[i], sizeof(u64), false);
 		}
 		break;
 	default:
@@ -822,47 +467,48 @@ static int kvm_eiointc_ctrl_access(struct kvm_device *dev,
 
 static int kvm_eiointc_regs_access(struct kvm_device *dev,
 					struct kvm_device_attr *attr,
-					bool is_write)
+					bool is_write, int *data)
 {
-	int addr, cpuid, offset, ret = 0;
+	int addr, cpu, offset, ret = 0;
 	unsigned long flags;
 	void *p = NULL;
-	void __user *data;
 	struct loongarch_eiointc *s;
 
 	s = dev->kvm->arch.eiointc;
 	addr = attr->attr;
-	cpuid = addr >> 16;
+	cpu = addr >> 16;
 	addr &= 0xffff;
-	data = (void __user *)attr->addr;
 	switch (addr) {
 	case EIOINTC_NODETYPE_START ... EIOINTC_NODETYPE_END:
 		offset = (addr - EIOINTC_NODETYPE_START) / 4;
-		p = &s->nodetype.reg_u32[offset];
+		p = s->nodetype + offset * 4;
 		break;
 	case EIOINTC_IPMAP_START ... EIOINTC_IPMAP_END:
 		offset = (addr - EIOINTC_IPMAP_START) / 4;
-		p = &s->ipmap.reg_u32[offset];
+		p = &s->ipmap + offset * 4;
 		break;
 	case EIOINTC_ENABLE_START ... EIOINTC_ENABLE_END:
 		offset = (addr - EIOINTC_ENABLE_START) / 4;
-		p = &s->enable.reg_u32[offset];
+		p = s->enable + offset * 4;
 		break;
 	case EIOINTC_BOUNCE_START ... EIOINTC_BOUNCE_END:
 		offset = (addr - EIOINTC_BOUNCE_START) / 4;
-		p = &s->bounce.reg_u32[offset];
+		p = s->bounce + offset * 4;
 		break;
 	case EIOINTC_ISR_START ... EIOINTC_ISR_END:
 		offset = (addr - EIOINTC_ISR_START) / 4;
-		p = &s->isr.reg_u32[offset];
+		p = s->isr + offset * 4;
 		break;
 	case EIOINTC_COREISR_START ... EIOINTC_COREISR_END:
+		if (cpu >= s->num_cpu)
+			return -EINVAL;
+
 		offset = (addr - EIOINTC_COREISR_START) / 4;
-		p = &s->coreisr.reg_u32[cpuid][offset];
+		p = s->coreisr[cpu] + offset * 4;
 		break;
 	case EIOINTC_COREMAP_START ... EIOINTC_COREMAP_END:
 		offset = (addr - EIOINTC_COREMAP_START) / 4;
-		p = &s->coremap.reg_u32[offset];
+		p = s->coremap + offset * 4;
 		break;
 	default:
 		kvm_err("%s: unknown eiointc register, addr = %d\n", __func__, addr);
@@ -870,13 +516,10 @@ static int kvm_eiointc_regs_access(struct kvm_device *dev,
 	}
 
 	spin_lock_irqsave(&s->lock, flags);
-	if (is_write) {
-		if (copy_from_user(p, data, 4))
-			ret = -EFAULT;
-	} else {
-		if (copy_to_user(data, p, 4))
-			ret = -EFAULT;
-	}
+	if (is_write)
+		memcpy(p, data, 4);
+	else
+		memcpy(data, p, 4);
 	spin_unlock_irqrestore(&s->lock, flags);
 
 	return ret;
@@ -884,24 +527,28 @@ static int kvm_eiointc_regs_access(struct kvm_device *dev,
 
 static int kvm_eiointc_sw_status_access(struct kvm_device *dev,
 					struct kvm_device_attr *attr,
-					bool is_write)
+					bool is_write, int *data)
 {
 	int addr, ret = 0;
 	unsigned long flags;
 	void *p = NULL;
-	void __user *data;
 	struct loongarch_eiointc *s;
 
 	s = dev->kvm->arch.eiointc;
 	addr = attr->attr;
 	addr &= 0xffff;
 
-	data = (void __user *)attr->addr;
 	switch (addr) {
 	case KVM_DEV_LOONGARCH_EXTIOI_SW_STATUS_NUM_CPU:
+		if (is_write)
+			return ret;
+
 		p = &s->num_cpu;
 		break;
 	case KVM_DEV_LOONGARCH_EXTIOI_SW_STATUS_FEATURE:
+		if (is_write)
+			return ret;
+
 		p = &s->features;
 		break;
 	case KVM_DEV_LOONGARCH_EXTIOI_SW_STATUS_STATE:
@@ -912,13 +559,10 @@ static int kvm_eiointc_sw_status_access(struct kvm_device *dev,
 		return -EINVAL;
 	}
 	spin_lock_irqsave(&s->lock, flags);
-	if (is_write) {
-		if (copy_from_user(p, data, 4))
-			ret = -EFAULT;
-	} else {
-		if (copy_to_user(data, p, 4))
-			ret = -EFAULT;
-	}
+	if (is_write)
+		memcpy(p, data, 4);
+	else
+		memcpy(data, p, 4);
 	spin_unlock_irqrestore(&s->lock, flags);
 
 	return ret;
@@ -927,11 +571,27 @@ static int kvm_eiointc_sw_status_access(struct kvm_device *dev,
 static int kvm_eiointc_get_attr(struct kvm_device *dev,
 				struct kvm_device_attr *attr)
 {
+	int ret, data;
+
 	switch (attr->group) {
 	case KVM_DEV_LOONGARCH_EXTIOI_GRP_REGS:
-		return kvm_eiointc_regs_access(dev, attr, false);
+		ret = kvm_eiointc_regs_access(dev, attr, false, &data);
+		if (ret)
+			return ret;
+
+		if (copy_to_user((void __user *)attr->addr, &data, 4))
+			ret = -EFAULT;
+
+		return ret;
 	case KVM_DEV_LOONGARCH_EXTIOI_GRP_SW_STATUS:
-		return kvm_eiointc_sw_status_access(dev, attr, false);
+		ret = kvm_eiointc_sw_status_access(dev, attr, false, &data);
+		if (ret)
+			return ret;
+
+		if (copy_to_user((void __user *)attr->addr, &data, 4))
+			ret = -EFAULT;
+
+		return ret;
 	default:
 		return -EINVAL;
 	}
@@ -940,13 +600,21 @@ static int kvm_eiointc_get_attr(struct kvm_device *dev,
 static int kvm_eiointc_set_attr(struct kvm_device *dev,
 				struct kvm_device_attr *attr)
 {
+	int data;
+
 	switch (attr->group) {
 	case KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL:
 		return kvm_eiointc_ctrl_access(dev, attr);
 	case KVM_DEV_LOONGARCH_EXTIOI_GRP_REGS:
-		return kvm_eiointc_regs_access(dev, attr, true);
+		if (copy_from_user(&data, (void __user *)attr->addr, 4))
+			return -EFAULT;
+
+		return kvm_eiointc_regs_access(dev, attr, true, &data);
 	case KVM_DEV_LOONGARCH_EXTIOI_GRP_SW_STATUS:
-		return kvm_eiointc_sw_status_access(dev, attr, true);
+		if (copy_from_user(&data, (void __user *)attr->addr, 4))
+			return -EFAULT;
+
+		return kvm_eiointc_sw_status_access(dev, attr, true, &data);
 	default:
 		return -EINVAL;
 	}
@@ -956,7 +624,7 @@ static int kvm_eiointc_create(struct kvm_device *dev, u32 type)
 {
 	int ret;
 	struct loongarch_eiointc *s;
-	struct kvm_io_device *device, *device1;
+	struct kvm_io_device *device;
 	struct kvm *kvm = dev->kvm;
 
 	/* eiointc has been created */
@@ -984,10 +652,10 @@ static int kvm_eiointc_create(struct kvm_device *dev, u32 type)
 		return ret;
 	}
 
-	device1 = &s->device_vext;
-	kvm_iodevice_init(device1, &kvm_eiointc_virt_ops);
+	device = &s->device_vext;
+	kvm_iodevice_init(device, &kvm_eiointc_virt_ops);
 	ret = kvm_io_bus_register_dev(kvm, KVM_IOCSR_BUS,
-			EIOINTC_VIRT_BASE, EIOINTC_VIRT_SIZE, device1);
+			EIOINTC_VIRT_BASE, EIOINTC_VIRT_SIZE, device);
 	if (ret < 0) {
 		kvm_io_bus_unregister_dev(kvm, KVM_IOCSR_BUS, &s->device);
 		kfree(s);
diff --git a/arch/loongarch/kvm/intc/ipi.c b/arch/loongarch/kvm/intc/ipi.c
index a233a323e295..05cefd29282e 100644
--- a/arch/loongarch/kvm/intc/ipi.c
+++ b/arch/loongarch/kvm/intc/ipi.c
@@ -7,13 +7,26 @@
 #include <asm/kvm_ipi.h>
 #include <asm/kvm_vcpu.h>
 
-static void ipi_send(struct kvm *kvm, uint64_t data)
+static void ipi_set(struct kvm_vcpu *vcpu, uint32_t data)
 {
-	int cpu, action;
 	uint32_t status;
-	struct kvm_vcpu *vcpu;
 	struct kvm_interrupt irq;
 
+	spin_lock(&vcpu->arch.ipi_state.lock);
+	status = vcpu->arch.ipi_state.status;
+	vcpu->arch.ipi_state.status |= data;
+	spin_unlock(&vcpu->arch.ipi_state.lock);
+	if ((status == 0) && data) {
+		irq.irq = LARCH_INT_IPI;
+		kvm_vcpu_ioctl_interrupt(vcpu, &irq);
+	}
+}
+
+static void ipi_send(struct kvm *kvm, uint64_t data)
+{
+	int cpu;
+	struct kvm_vcpu *vcpu;
+
 	cpu = ((data & 0xffffffff) >> 16) & 0x3ff;
 	vcpu = kvm_get_vcpu_by_cpuid(kvm, cpu);
 	if (unlikely(vcpu == NULL)) {
@@ -21,15 +34,7 @@ static void ipi_send(struct kvm *kvm, uint64_t data)
 		return;
 	}
 
-	action = BIT(data & 0x1f);
-	spin_lock(&vcpu->arch.ipi_state.lock);
-	status = vcpu->arch.ipi_state.status;
-	vcpu->arch.ipi_state.status |= action;
-	spin_unlock(&vcpu->arch.ipi_state.lock);
-	if (status == 0) {
-		irq.irq = LARCH_INT_IPI;
-		kvm_vcpu_ioctl_interrupt(vcpu, &irq);
-	}
+	ipi_set(vcpu, BIT(data & 0x1f));
 }
 
 static void ipi_clear(struct kvm_vcpu *vcpu, uint64_t data)
@@ -96,10 +101,38 @@ static void write_mailbox(struct kvm_vcpu *vcpu, int offset, uint64_t data, int
 	spin_unlock(&vcpu->arch.ipi_state.lock);
 }
 
-static int send_ipi_data(struct kvm_vcpu *vcpu, gpa_t addr, uint64_t data)
+static int mail_send(struct kvm *kvm, uint64_t data)
 {
-	int i, ret;
+	int i, cpu, mailbox, offset;
 	uint32_t val = 0, mask = 0;
+	struct kvm_vcpu *vcpu;
+
+	cpu = ((data & 0xffffffff) >> 16) & 0x3ff;
+	vcpu = kvm_get_vcpu_by_cpuid(kvm, cpu);
+	if (unlikely(vcpu == NULL)) {
+		kvm_err("%s: invalid target cpu: %d\n", __func__, cpu);
+		return -EINVAL;
+	}
+	mailbox = ((data & 0xffffffff) >> 2) & 0x7;
+	offset = IOCSR_IPI_BUF_20 + mailbox * 4;
+	if ((data >> 27) & 0xf) {
+		val = read_mailbox(vcpu, offset, 4);
+		for (i = 0; i < 4; i++)
+			if (data & (BIT(27 + i)))
+				mask |= (0xff << (i * 8));
+		val &= mask;
+	}
+
+	val |= ((uint32_t)(data >> 32) & ~mask);
+	write_mailbox(vcpu, offset, val, 4);
+
+	return 0;
+}
+
+static int send_ipi_data(struct kvm_vcpu *vcpu, gpa_t addr, uint64_t data)
+{
+	int i, idx, ret;
+	uint64_t val = 0, mask = 0;
 
 	/*
 	 * Bit 27-30 is mask for byte writing.
@@ -107,9 +140,11 @@ static int send_ipi_data(struct kvm_vcpu *vcpu, gpa_t addr, uint64_t data)
 	 */
 	if ((data >> 27) & 0xf) {
 		/* Read the old val */
-		ret = kvm_io_bus_read(vcpu, KVM_IOCSR_BUS, addr, sizeof(val), &val);
+		idx = srcu_read_lock(&vcpu->kvm->srcu);
+		ret = kvm_io_bus_read(vcpu, KVM_IOCSR_BUS, addr, 4, &val);
+		srcu_read_unlock(&vcpu->kvm->srcu, idx);
 		if (unlikely(ret)) {
-			kvm_err("%s: : read date from addr %llx failed\n", __func__, addr);
+			kvm_err("%s: : read data from addr %llx failed\n", __func__, addr);
 			return ret;
 		}
 		/* Construct the mask by scanning the bit 27-30 */
@@ -121,30 +156,15 @@ static int send_ipi_data(struct kvm_vcpu *vcpu, gpa_t addr, uint64_t data)
 		val &= mask;
 	}
 	val |= ((uint32_t)(data >> 32) & ~mask);
-	ret = kvm_io_bus_write(vcpu, KVM_IOCSR_BUS, addr, sizeof(val), &val);
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
+	ret = kvm_io_bus_write(vcpu, KVM_IOCSR_BUS, addr, 4, &val);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 	if (unlikely(ret))
-		kvm_err("%s: : write date to addr %llx failed\n", __func__, addr);
+		kvm_err("%s: : write data to addr %llx failed\n", __func__, addr);
 
 	return ret;
 }
 
-static int mail_send(struct kvm *kvm, uint64_t data)
-{
-	int cpu, mailbox, offset;
-	struct kvm_vcpu *vcpu;
-
-	cpu = ((data & 0xffffffff) >> 16) & 0x3ff;
-	vcpu = kvm_get_vcpu_by_cpuid(kvm, cpu);
-	if (unlikely(vcpu == NULL)) {
-		kvm_err("%s: invalid target cpu: %d\n", __func__, cpu);
-		return -EINVAL;
-	}
-	mailbox = ((data & 0xffffffff) >> 2) & 0x7;
-	offset = IOCSR_IPI_BASE + IOCSR_IPI_BUF_20 + mailbox * 4;
-
-	return send_ipi_data(vcpu, offset, data);
-}
-
 static int any_send(struct kvm *kvm, uint64_t data)
 {
 	int cpu, offset;
@@ -227,7 +247,7 @@ static int loongarch_ipi_writel(struct kvm_vcpu *vcpu, gpa_t addr, int len, cons
 		spin_unlock(&vcpu->arch.ipi_state.lock);
 		break;
 	case IOCSR_IPI_SET:
-		ret = -EINVAL;
+		ipi_set(vcpu, data);
 		break;
 	case IOCSR_IPI_CLEAR:
 		/* Just clear the status of the current vcpu */
@@ -246,10 +266,10 @@ static int loongarch_ipi_writel(struct kvm_vcpu *vcpu, gpa_t addr, int len, cons
 		ipi_send(vcpu->kvm, data);
 		break;
 	case IOCSR_MAIL_SEND:
-		ret = mail_send(vcpu->kvm, *(uint64_t *)val);
+		ret = mail_send(vcpu->kvm, data);
 		break;
 	case IOCSR_ANY_SEND:
-		ret = any_send(vcpu->kvm, *(uint64_t *)val);
+		ret = any_send(vcpu->kvm, data);
 		break;
 	default:
 		kvm_err("%s: unknown addr: %llx\n", __func__, addr);
@@ -264,36 +284,16 @@ static int kvm_ipi_read(struct kvm_vcpu *vcpu,
 			struct kvm_io_device *dev,
 			gpa_t addr, int len, void *val)
 {
-	int ret;
-	struct loongarch_ipi *ipi;
-
-	ipi = vcpu->kvm->arch.ipi;
-	if (!ipi) {
-		kvm_err("%s: ipi irqchip not valid!\n", __func__);
-		return -EINVAL;
-	}
-	ipi->kvm->stat.ipi_read_exits++;
-	ret = loongarch_ipi_readl(vcpu, addr, len, val);
-
-	return ret;
+	vcpu->stat.ipi_read_exits++;
+	return loongarch_ipi_readl(vcpu, addr, len, val);
 }
 
 static int kvm_ipi_write(struct kvm_vcpu *vcpu,
 			struct kvm_io_device *dev,
 			gpa_t addr, int len, const void *val)
 {
-	int ret;
-	struct loongarch_ipi *ipi;
-
-	ipi = vcpu->kvm->arch.ipi;
-	if (!ipi) {
-		kvm_err("%s: ipi irqchip not valid!\n", __func__);
-		return -EINVAL;
-	}
-	ipi->kvm->stat.ipi_write_exits++;
-	ret = loongarch_ipi_writel(vcpu, addr, len, val);
-
-	return ret;
+	vcpu->stat.ipi_write_exits++;
+	return loongarch_ipi_writel(vcpu, addr, len, val);
 }
 
 static const struct kvm_io_device_ops kvm_ipi_ops = {
@@ -314,7 +314,7 @@ static int kvm_ipi_regs_access(struct kvm_device *dev,
 	cpu = (attr->attr >> 16) & 0x3ff;
 	addr = attr->attr & 0xff;
 
-	vcpu = kvm_get_vcpu(dev->kvm, cpu);
+	vcpu = kvm_get_vcpu_by_id(dev->kvm, cpu);
 	if (unlikely(vcpu == NULL)) {
 		kvm_err("%s: invalid target cpu: %d\n", __func__, cpu);
 		return -EINVAL;
diff --git a/arch/loongarch/kvm/intc/pch_pic.c b/arch/loongarch/kvm/intc/pch_pic.c
index 08fce845f668..a698a73de399 100644
--- a/arch/loongarch/kvm/intc/pch_pic.c
+++ b/arch/loongarch/kvm/intc/pch_pic.c
@@ -35,16 +35,11 @@ static void pch_pic_update_irq(struct loongarch_pch_pic *s, int irq, int level)
 /* update batch irqs, the irq_mask is a bitmap of irqs */
 static void pch_pic_update_batch_irqs(struct loongarch_pch_pic *s, u64 irq_mask, int level)
 {
-	int irq, bits;
+	unsigned int irq;
+	DECLARE_BITMAP(irqs, 64) = { BITMAP_FROM_U64(irq_mask) };
 
-	/* find each irq by irqs bitmap and update each irq */
-	bits = sizeof(irq_mask) * 8;
-	irq = find_first_bit((void *)&irq_mask, bits);
-	while (irq < bits) {
+	for_each_set_bit(irq, irqs, 64)
 		pch_pic_update_irq(s, irq, level);
-		bitmap_clear((void *)&irq_mask, irq, 1);
-		irq = find_first_bit((void *)&irq_mask, bits);
-	}
 }
 
 /* called when a irq is triggered in pch pic */
@@ -77,109 +72,65 @@ void pch_msi_set_irq(struct kvm *kvm, int irq, int level)
 	eiointc_set_irq(kvm->arch.eiointc, irq, level);
 }
 
-/*
- * pch pic register is 64-bit, but it is accessed by 32-bit,
- * so we use high to get whether low or high 32 bits we want
- * to read.
- */
-static u32 pch_pic_read_reg(u64 *s, int high)
-{
-	u64 val = *s;
-
-	/* read the high 32 bits when high is 1 */
-	return high ? (u32)(val >> 32) : (u32)val;
-}
-
-/*
- * pch pic register is 64-bit, but it is accessed by 32-bit,
- * so we use high to get whether low or high 32 bits we want
- * to write.
- */
-static u32 pch_pic_write_reg(u64 *s, int high, u32 v)
-{
-	u64 val = *s, data = v;
-
-	if (high) {
-		/*
-		 * Clear val high 32 bits
-		 * Write the high 32 bits when the high is 1
-		 */
-		*s = (val << 32 >> 32) | (data << 32);
-		val >>= 32;
-	} else
-		/*
-		 * Clear val low 32 bits
-		 * Write the low 32 bits when the high is 0
-		 */
-		*s = (val >> 32 << 32) | v;
-
-	return (u32)val;
-}
-
 static int loongarch_pch_pic_read(struct loongarch_pch_pic *s, gpa_t addr, int len, void *val)
 {
-	int offset, index, ret = 0;
-	u32 data = 0;
-	u64 int_id = 0;
+	int ret = 0, offset;
+	u64 data = 0;
+	void *ptemp;
 
 	offset = addr - s->pch_pic_base;
+	offset -= offset & 7;
 
 	spin_lock(&s->lock);
 	switch (offset) {
 	case PCH_PIC_INT_ID_START ... PCH_PIC_INT_ID_END:
-		/* int id version */
-		int_id |= (u64)PCH_PIC_INT_ID_VER << 32;
-		/* irq number */
-		int_id |= (u64)31 << (32 + 16);
-		/* int id value */
-		int_id |= PCH_PIC_INT_ID_VAL;
-		*(u64 *)val = int_id;
+		data = s->id.data;
 		break;
 	case PCH_PIC_MASK_START ... PCH_PIC_MASK_END:
-		offset -= PCH_PIC_MASK_START;
-		index = offset >> 2;
-		/* read mask reg */
-		data = pch_pic_read_reg(&s->mask, index);
-		*(u32 *)val = data;
+		data = s->mask;
 		break;
 	case PCH_PIC_HTMSI_EN_START ... PCH_PIC_HTMSI_EN_END:
-		offset -= PCH_PIC_HTMSI_EN_START;
-		index = offset >> 2;
 		/* read htmsi enable reg */
-		data = pch_pic_read_reg(&s->htmsi_en, index);
-		*(u32 *)val = data;
+		data = s->htmsi_en;
 		break;
 	case PCH_PIC_EDGE_START ... PCH_PIC_EDGE_END:
-		offset -= PCH_PIC_EDGE_START;
-		index = offset >> 2;
 		/* read edge enable reg */
-		data = pch_pic_read_reg(&s->edge, index);
-		*(u32 *)val = data;
+		data = s->edge;
 		break;
 	case PCH_PIC_AUTO_CTRL0_START ... PCH_PIC_AUTO_CTRL0_END:
 	case PCH_PIC_AUTO_CTRL1_START ... PCH_PIC_AUTO_CTRL1_END:
 		/* we only use default mode: fixed interrupt distribution mode */
-		*(u32 *)val = 0;
 		break;
 	case PCH_PIC_ROUTE_ENTRY_START ... PCH_PIC_ROUTE_ENTRY_END:
 		/* only route to int0: eiointc */
-		*(u8 *)val = 1;
+		ptemp = s->route_entry + (offset - PCH_PIC_ROUTE_ENTRY_START);
+		data = *(u64 *)ptemp;
 		break;
 	case PCH_PIC_HTMSI_VEC_START ... PCH_PIC_HTMSI_VEC_END:
-		offset -= PCH_PIC_HTMSI_VEC_START;
 		/* read htmsi vector */
-		data = s->htmsi_vector[offset];
-		*(u8 *)val = data;
+		ptemp = s->htmsi_vector + (offset - PCH_PIC_HTMSI_VEC_START);
+		data = *(u64 *)ptemp;
 		break;
 	case PCH_PIC_POLARITY_START ... PCH_PIC_POLARITY_END:
-		/* we only use defalut value 0: high level triggered */
-		*(u32 *)val = 0;
+		data = s->polarity;
+		break;
+	case PCH_PIC_INT_IRR_START:
+		data = s->irr;
+		break;
+	case PCH_PIC_INT_ISR_START:
+		data = s->isr;
 		break;
 	default:
 		ret = -EINVAL;
 	}
 	spin_unlock(&s->lock);
 
+	if (ret == 0) {
+		offset = (addr - s->pch_pic_base) & 7;
+		data = data >> (offset * 8);
+		memcpy(val, &data, len);
+	}
+
 	return ret;
 }
 
@@ -195,8 +146,13 @@ static int kvm_pch_pic_read(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 	}
 
+	if (addr & (len - 1)) {
+		kvm_err("%s: pch pic not aligned addr %llx len %d\n", __func__, addr, len);
+		return -EINVAL;
+	}
+
 	/* statistics of pch pic reading */
-	vcpu->kvm->stat.pch_pic_read_exits++;
+	vcpu->stat.pch_pic_read_exits++;
 	ret = loongarch_pch_pic_read(s, addr, len, val);
 
 	return ret;
@@ -205,81 +161,69 @@ static int kvm_pch_pic_read(struct kvm_vcpu *vcpu,
 static int loongarch_pch_pic_write(struct loongarch_pch_pic *s, gpa_t addr,
 					int len, const void *val)
 {
-	int ret;
-	u32 old, data, offset, index;
-	u64 irq;
+	int ret = 0, offset;
+	u64 old, data, mask;
+	void *ptemp;
+
+	switch (len) {
+	case 1:
+		data = *(u8 *)val;
+		mask = 0xFF;
+		break;
+	case 2:
+		data = *(u16 *)val;
+		mask = USHRT_MAX;
+		break;
+	case 4:
+		data = *(u32 *)val;
+		mask = UINT_MAX;
+		break;
+	case 8:
+	default:
+		data = *(u64 *)val;
+		mask = ULONG_MAX;
+		break;
+	}
 
-	ret = 0;
-	data = *(u32 *)val;
-	offset = addr - s->pch_pic_base;
+	offset = (addr - s->pch_pic_base) & 7;
+	mask = mask << (offset * 8);
+	data = data << (offset * 8);
+	offset = (addr - s->pch_pic_base) - offset;
 
 	spin_lock(&s->lock);
 	switch (offset) {
-	case PCH_PIC_MASK_START ... PCH_PIC_MASK_END:
-		offset -= PCH_PIC_MASK_START;
-		/* get whether high or low 32 bits we want to write */
-		index = offset >> 2;
-		old = pch_pic_write_reg(&s->mask, index, data);
-		/* enable irq when mask value change to 0 */
-		irq = (old & ~data) << (32 * index);
-		pch_pic_update_batch_irqs(s, irq, 1);
-		/* disable irq when mask value change to 1 */
-		irq = (~old & data) << (32 * index);
-		pch_pic_update_batch_irqs(s, irq, 0);
-		break;
-	case PCH_PIC_HTMSI_EN_START ... PCH_PIC_HTMSI_EN_END:
-		offset -= PCH_PIC_HTMSI_EN_START;
-		index = offset >> 2;
-		pch_pic_write_reg(&s->htmsi_en, index, data);
+	case PCH_PIC_MASK_START:
+		old = s->mask;
+		s->mask = (old & ~mask) | data;
+		if (old & ~data)
+			pch_pic_update_batch_irqs(s, old & ~data, 1);
+		if (~old & data)
+			pch_pic_update_batch_irqs(s, ~old & data, 0);
 		break;
-	case PCH_PIC_EDGE_START ... PCH_PIC_EDGE_END:
-		offset -= PCH_PIC_EDGE_START;
-		index = offset >> 2;
-		/* 1: edge triggered, 0: level triggered */
-		pch_pic_write_reg(&s->edge, index, data);
-		break;
-	case PCH_PIC_CLEAR_START ... PCH_PIC_CLEAR_END:
-		offset -= PCH_PIC_CLEAR_START;
-		index = offset >> 2;
-		/* write 1 to clear edge irq */
-		old = pch_pic_read_reg(&s->irr, index);
-		/*
-		 * get the irq bitmap which is edge triggered and
-		 * already set and to be cleared
-		 */
-		irq = old & pch_pic_read_reg(&s->edge, index) & data;
-		/* write irr to the new state where irqs have been cleared */
-		pch_pic_write_reg(&s->irr, index, old & ~irq);
-		/* update cleared irqs */
-		pch_pic_update_batch_irqs(s, irq, 0);
+	case PCH_PIC_HTMSI_EN_START:
+		s->htmsi_en = (s->htmsi_en & ~mask) | data;
 		break;
-	case PCH_PIC_AUTO_CTRL0_START ... PCH_PIC_AUTO_CTRL0_END:
-		offset -= PCH_PIC_AUTO_CTRL0_START;
-		index = offset >> 2;
-		/* we only use default mode: fixed interrupt distribution mode */
-		pch_pic_write_reg(&s->auto_ctrl0, index, 0);
+	case PCH_PIC_EDGE_START:
+		s->edge = (s->edge & ~mask) | data;
 		break;
-	case PCH_PIC_AUTO_CTRL1_START ... PCH_PIC_AUTO_CTRL1_END:
-		offset -= PCH_PIC_AUTO_CTRL1_START;
-		index = offset >> 2;
-		/* we only use default mode: fixed interrupt distribution mode */
-		pch_pic_write_reg(&s->auto_ctrl1, index, 0);
+	case PCH_PIC_POLARITY_START:
+		s->polarity = (s->polarity & ~mask) | data;
 		break;
-	case PCH_PIC_ROUTE_ENTRY_START ... PCH_PIC_ROUTE_ENTRY_END:
-		offset -= PCH_PIC_ROUTE_ENTRY_START;
-		/* only route to int0: eiointc */
-		s->route_entry[offset] = 1;
+	case PCH_PIC_CLEAR_START:
+		old = s->irr & s->edge & data;
+		if (old) {
+			s->irr &= ~old;
+			pch_pic_update_batch_irqs(s, old, 0);
+		}
 		break;
 	case PCH_PIC_HTMSI_VEC_START ... PCH_PIC_HTMSI_VEC_END:
-		/* route table to eiointc */
-		offset -= PCH_PIC_HTMSI_VEC_START;
-		s->htmsi_vector[offset] = (u8)data;
+		ptemp = s->htmsi_vector + (offset - PCH_PIC_HTMSI_VEC_START);
+		*(u64 *)ptemp = (*(u64 *)ptemp & ~mask) | data;
 		break;
-	case PCH_PIC_POLARITY_START ... PCH_PIC_POLARITY_END:
-		offset -= PCH_PIC_POLARITY_START;
-		index = offset >> 2;
-		/* we only use defalut value 0: high level triggered */
-		pch_pic_write_reg(&s->polarity, index, 0);
+	/* Not implemented */
+	case PCH_PIC_AUTO_CTRL0_START:
+	case PCH_PIC_AUTO_CTRL1_START:
+	case PCH_PIC_ROUTE_ENTRY_START ... PCH_PIC_ROUTE_ENTRY_END:
 		break;
 	default:
 		ret = -EINVAL;
@@ -302,8 +246,13 @@ static int kvm_pch_pic_write(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 	}
 
+	if (addr & (len - 1)) {
+		kvm_err("%s: pch pic not aligned addr %llx len %d\n", __func__, addr, len);
+		return -EINVAL;
+	}
+
 	/* statistics of pch pic writing */
-	vcpu->kvm->stat.pch_pic_write_exits++;
+	vcpu->stat.pch_pic_write_exits++;
 	ret = loongarch_pch_pic_write(s, addr, len, val);
 
 	return ret;
@@ -338,6 +287,7 @@ static int kvm_pch_pic_regs_access(struct kvm_device *dev,
 				struct kvm_device_attr *attr,
 				bool is_write)
 {
+	char buf[8];
 	int addr, offset, len = 8, ret = 0;
 	void __user *data;
 	void *p = NULL;
@@ -387,17 +337,23 @@ static int kvm_pch_pic_regs_access(struct kvm_device *dev,
 		return -EINVAL;
 	}
 
-	spin_lock(&s->lock);
-	/* write or read value according to is_write */
 	if (is_write) {
-		if (copy_from_user(p, data, len))
-			ret = -EFAULT;
-	} else {
-		if (copy_to_user(data, p, len))
-			ret = -EFAULT;
+		if (copy_from_user(buf, data, len))
+			return -EFAULT;
 	}
+
+	spin_lock(&s->lock);
+	if (is_write)
+		memcpy(p, buf, len);
+	else
+		memcpy(buf, p, len);
 	spin_unlock(&s->lock);
 
+	if (!is_write) {
+		if (copy_to_user(data, buf, len))
+			return -EFAULT;
+	}
+
 	return ret;
 }
 
@@ -467,7 +423,7 @@ static int kvm_setup_default_irq_routing(struct kvm *kvm)
 
 static int kvm_pch_pic_create(struct kvm_device *dev, u32 type)
 {
-	int ret;
+	int i, ret, irq_num;
 	struct kvm *kvm = dev->kvm;
 	struct loongarch_pch_pic *s;
 
@@ -483,6 +439,22 @@ static int kvm_pch_pic_create(struct kvm_device *dev, u32 type)
 	if (!s)
 		return -ENOMEM;
 
+	/*
+	 * Interrupt controller identification register 1
+	 *   Bit 24-31 Interrupt Controller ID
+	 * Interrupt controller identification register 2
+	 *   Bit  0-7  Interrupt Controller version number
+	 *   Bit 16-23 The number of interrupt sources supported
+	 */
+	irq_num = 32;
+	s->mask = -1UL;
+	s->id.desc.id = PCH_PIC_INT_ID_VAL;
+	s->id.desc.version = PCH_PIC_INT_ID_VER;
+	s->id.desc.irq_num = irq_num - 1;
+	for (i = 0; i < irq_num; i++) {
+		s->route_entry[i] = 1;
+		s->htmsi_vector[i] = i;
+	}
 	spin_lock_init(&s->lock);
 	s->kvm = kvm;
 	kvm->arch.pch_pic = s;
diff --git a/arch/loongarch/kvm/interrupt.c b/arch/loongarch/kvm/interrupt.c
index 4c3f22de4b40..a6d42d399a59 100644
--- a/arch/loongarch/kvm/interrupt.c
+++ b/arch/loongarch/kvm/interrupt.c
@@ -21,6 +21,7 @@ static unsigned int priority_to_irq[EXCCODE_INT_NUM] = {
 	[INT_HWI5]	= CPU_IP5,
 	[INT_HWI6]	= CPU_IP6,
 	[INT_HWI7]	= CPU_IP7,
+	[INT_AVEC]	= CPU_AVEC,
 };
 
 static int kvm_irq_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
@@ -31,6 +32,11 @@ static int kvm_irq_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
 	if (priority < EXCCODE_INT_NUM)
 		irq = priority_to_irq[priority];
 
+	if (cpu_has_msgint && (priority == INT_AVEC)) {
+		set_gcsr_estat(irq);
+		return 1;
+	}
+
 	switch (priority) {
 	case INT_TI:
 	case INT_IPI:
@@ -58,6 +64,11 @@ static int kvm_irq_clear(struct kvm_vcpu *vcpu, unsigned int priority)
 	if (priority < EXCCODE_INT_NUM)
 		irq = priority_to_irq[priority];
 
+	if (cpu_has_msgint && (priority == INT_AVEC)) {
+		clear_gcsr_estat(irq);
+		return 1;
+	}
+
 	switch (priority) {
 	case INT_TI:
 	case INT_IPI:
@@ -83,28 +94,11 @@ void kvm_deliver_intr(struct kvm_vcpu *vcpu)
 	unsigned long *pending = &vcpu->arch.irq_pending;
 	unsigned long *pending_clr = &vcpu->arch.irq_clear;
 
-	if (!(*pending) && !(*pending_clr))
-		return;
-
-	if (*pending_clr) {
-		priority = __ffs(*pending_clr);
-		while (priority <= INT_IPI) {
-			kvm_irq_clear(vcpu, priority);
-			priority = find_next_bit(pending_clr,
-					BITS_PER_BYTE * sizeof(*pending_clr),
-					priority + 1);
-		}
-	}
+	for_each_set_bit(priority, pending_clr, EXCCODE_INT_NUM)
+		kvm_irq_clear(vcpu, priority);
 
-	if (*pending) {
-		priority = __ffs(*pending);
-		while (priority <= INT_IPI) {
-			kvm_irq_deliver(vcpu, priority);
-			priority = find_next_bit(pending,
-					BITS_PER_BYTE * sizeof(*pending),
-					priority + 1);
-		}
-	}
+	for_each_set_bit(priority, pending, EXCCODE_INT_NUM)
+		kvm_irq_deliver(vcpu, priority);
 }
 
 int kvm_pending_timer(struct kvm_vcpu *vcpu)
diff --git a/arch/loongarch/kvm/main.c b/arch/loongarch/kvm/main.c
index 396fed2665a5..80ea63d465b8 100644
--- a/arch/loongarch/kvm/main.c
+++ b/arch/loongarch/kvm/main.c
@@ -245,6 +245,24 @@ void kvm_check_vpid(struct kvm_vcpu *vcpu)
 		trace_kvm_vpid_change(vcpu, vcpu->arch.vpid);
 		vcpu->cpu = cpu;
 		kvm_clear_request(KVM_REQ_TLB_FLUSH_GPA, vcpu);
+
+		/*
+		 * LLBCTL is a separated guest CSR register from host, a general
+		 * exception ERET instruction clears the host LLBCTL register in
+		 * host mode, and clears the guest LLBCTL register in guest mode.
+		 * ERET in tlb refill exception does not clear LLBCTL register.
+		 *
+		 * When secondary mmu mapping is changed, guest OS does not know
+		 * even if the content is changed after mapping is changed.
+		 *
+		 * Here clear WCLLB of the guest LLBCTL register when mapping is
+		 * changed. Otherwise, if mmu mapping is changed while guest is
+		 * executing LL/SC pair, LL loads with the old address and set
+		 * the LLBCTL flag, SC checks the LLBCTL flag and will store the
+		 * new address successfully since LLBCTL_WCLLB is on, even if
+		 * memory with new address is changed on other VCPUs.
+		 */
+		set_gcsr_llbctl(CSR_LLBCTL_WCLLB);
 	}
 
 	/* Restore GSTAT(0x50).vpid */
@@ -278,16 +296,16 @@ int kvm_arch_enable_virtualization_cpu(void)
 	/*
 	 * Enable virtualization features granting guest direct control of
 	 * certain features:
-	 * GCI=2:       Trap on init or unimplement cache instruction.
+	 * GCI=2:       Trap on init or unimplemented cache instruction.
 	 * TORU=0:      Trap on Root Unimplement.
 	 * CACTRL=1:    Root control cache.
-	 * TOP=0:       Trap on Previlege.
+	 * TOP=0:       Trap on Privilege.
 	 * TOE=0:       Trap on Exception.
 	 * TIT=0:       Trap on Timer.
 	 */
-	if (env & CSR_GCFG_GCIP_ALL)
+	if (env & CSR_GCFG_GCIP_SECURE)
 		gcfg |= CSR_GCFG_GCI_SECURE;
-	if (env & CSR_GCFG_MATC_ROOT)
+	if (env & CSR_GCFG_MATP_ROOT)
 		gcfg |= CSR_GCFG_MATC_ROOT;
 
 	write_csr_gcfg(gcfg);
@@ -299,6 +317,13 @@ int kvm_arch_enable_virtualization_cpu(void)
 	kvm_debug("GCFG:%lx GSTAT:%lx GINTC:%lx GTLBC:%lx",
 		  read_csr_gcfg(), read_csr_gstat(), read_csr_gintc(), read_csr_gtlbc());
 
+	/*
+	 * HW Guest CSR registers are lost after CPU suspend and resume.
+	 * Clear last_vcpu so that Guest CSR registers forced to reload
+	 * from vCPU SW state.
+	 */
+	this_cpu_ptr(vmcs)->last_vcpu = NULL;
+
 	return 0;
 }
 
@@ -369,6 +394,7 @@ static int kvm_loongarch_env_init(void)
 	}
 
 	kvm_init_gcsr_flag();
+	kvm_register_perf_callbacks(NULL);
 
 	/* Register LoongArch IPI interrupt controller interface. */
 	ret = kvm_loongarch_register_ipi_device();
@@ -400,6 +426,8 @@ static void kvm_loongarch_env_exit(void)
 		}
 		kfree(kvm_loongarch_ops);
 	}
+
+	kvm_unregister_perf_callbacks();
 }
 
 static int kvm_loongarch_init(void)
diff --git a/arch/loongarch/kvm/mmu.c b/arch/loongarch/kvm/mmu.c
index 4d203294767c..a7fa458e3360 100644
--- a/arch/loongarch/kvm/mmu.c
+++ b/arch/loongarch/kvm/mmu.c
@@ -569,7 +569,7 @@ static int kvm_map_page_fast(struct kvm_vcpu *vcpu, unsigned long gpa, bool writ
 	/* Track access to pages marked old */
 	new = kvm_pte_mkyoung(*ptep);
 	if (write && !kvm_pte_dirty(new)) {
-		if (!kvm_pte_write(new)) {
+		if (!kvm_pte_writeable(new)) {
 			ret = -EFAULT;
 			goto out;
 		}
@@ -856,9 +856,9 @@ retry:
 		prot_bits |= _CACHE_SUC;
 
 	if (writeable) {
-		prot_bits |= _PAGE_WRITE;
-		if (write)
-			prot_bits |= __WRITEABLE;
+		prot_bits = kvm_pte_mkwriteable(prot_bits);
+		if (write || !kvm_slot_dirty_track_enabled(memslot))
+			prot_bits = kvm_pte_mkdirty(prot_bits);
 	}
 
 	/* Disable dirty logging on HugePages */
@@ -904,7 +904,7 @@ retry:
 	kvm_release_faultin_page(kvm, page, false, writeable);
 	spin_unlock(&kvm->mmu_lock);
 
-	if (prot_bits & _PAGE_DIRTY)
+	if (kvm_pte_dirty(prot_bits))
 		mark_page_dirty_in_slot(kvm, memslot, gfn);
 
 out:
@@ -912,7 +912,7 @@ out:
 	return err;
 }
 
-int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long gpa, bool write)
+int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long gpa, bool write, int ecode)
 {
 	int ret;
 
@@ -921,8 +921,17 @@ int kvm_handle_mm_fault(struct kvm_vcpu *vcpu, unsigned long gpa, bool write)
 		return ret;
 
 	/* Invalidate this entry in the TLB */
-	vcpu->arch.flush_gpa = gpa;
-	kvm_make_request(KVM_REQ_TLB_FLUSH_GPA, vcpu);
+	if (!cpu_has_ptw || (ecode == EXCCODE_TLBM)) {
+		/*
+		 * With HW PTW, invalid TLB is not added when page fault. But
+		 * for EXCCODE_TLBM exception, stale TLB may exist because of
+		 * the last read access.
+		 *
+		 * With SW PTW, invalid TLB is added in TLB refill exception.
+		 */
+		vcpu->arch.flush_gpa = gpa;
+		kvm_make_request(KVM_REQ_TLB_FLUSH_GPA, vcpu);
+	}
 
 	return 0;
 }
diff --git a/arch/loongarch/kvm/switch.S b/arch/loongarch/kvm/switch.S
index 0c292f818492..f1768b7a6194 100644
--- a/arch/loongarch/kvm/switch.S
+++ b/arch/loongarch/kvm/switch.S
@@ -60,16 +60,8 @@
 	ld.d	t0, a2, KVM_ARCH_GPC
 	csrwr	t0, LOONGARCH_CSR_ERA
 
-	/* Save host PGDL */
-	csrrd	t0, LOONGARCH_CSR_PGDL
-	st.d	t0, a2, KVM_ARCH_HPGD
-
-	/* Switch to kvm */
-	ld.d	t1, a2, KVM_VCPU_KVM - KVM_VCPU_ARCH
-
-	/* Load guest PGDL */
-	li.w    t0, KVM_GPGD
-	ldx.d   t0, t1, t0
+	/* Load PGD for KVM hypervisor */
+	ld.d	t0, a2, KVM_ARCH_KVMPGD
 	csrwr	t0, LOONGARCH_CSR_PGDL
 
 	/* Mix GID and RID */
@@ -85,7 +77,7 @@
 	 * Guest CRMD comes from separate GCSR_CRMD register
 	 */
 	ori	t0, zero, CSR_PRMD_PIE
-	csrxchg	t0, t0,   LOONGARCH_CSR_PRMD
+	csrwr	t0, LOONGARCH_CSR_PRMD
 
 	/* Set PVM bit to setup ertn to guest context */
 	ori	t0, zero, CSR_GSTAT_PVM
diff --git a/arch/loongarch/kvm/timer.c b/arch/loongarch/kvm/timer.c
index 32dc213374be..29c2aaba63c3 100644
--- a/arch/loongarch/kvm/timer.c
+++ b/arch/loongarch/kvm/timer.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/kvm_host.h>
+#include <asm/delay.h>
 #include <asm/kvm_csr.h>
 #include <asm/kvm_vcpu.h>
 
@@ -95,6 +96,7 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu)
 		 * and set CSR TVAL with -1
 		 */
 		write_gcsr_timertick(0);
+		__delay(2); /* Wait cycles until timer interrupt injected */
 
 		/*
 		 * Writing CSR_TINTCLR_TI to LOONGARCH_CSR_TINTCLR will clear
diff --git a/arch/loongarch/kvm/trace.h b/arch/loongarch/kvm/trace.h
index 1783397b1bc8..3467ee22b704 100644
--- a/arch/loongarch/kvm/trace.h
+++ b/arch/loongarch/kvm/trace.h
@@ -46,11 +46,15 @@ DEFINE_EVENT(kvm_transition, kvm_out,
 /* Further exit reasons */
 #define KVM_TRACE_EXIT_IDLE		64
 #define KVM_TRACE_EXIT_CACHE		65
+#define KVM_TRACE_EXIT_CPUCFG		66
+#define KVM_TRACE_EXIT_CSR		67
 
 /* Tracepoints for VM exits */
 #define kvm_trace_symbol_exit_types			\
 	{ KVM_TRACE_EXIT_IDLE,		"IDLE" },	\
-	{ KVM_TRACE_EXIT_CACHE,		"CACHE" }
+	{ KVM_TRACE_EXIT_CACHE,		"CACHE" },	\
+	{ KVM_TRACE_EXIT_CPUCFG,	"CPUCFG" },	\
+	{ KVM_TRACE_EXIT_CSR,		"CSR" }
 
 DECLARE_EVENT_CLASS(kvm_exit,
 	    TP_PROTO(struct kvm_vcpu *vcpu, unsigned int reason),
@@ -82,6 +86,14 @@ DEFINE_EVENT(kvm_exit, kvm_exit_cache,
 	     TP_PROTO(struct kvm_vcpu *vcpu, unsigned int reason),
 	     TP_ARGS(vcpu, reason));
 
+DEFINE_EVENT(kvm_exit, kvm_exit_cpucfg,
+	     TP_PROTO(struct kvm_vcpu *vcpu, unsigned int reason),
+	     TP_ARGS(vcpu, reason));
+
+DEFINE_EVENT(kvm_exit, kvm_exit_csr,
+	     TP_PROTO(struct kvm_vcpu *vcpu, unsigned int reason),
+	     TP_ARGS(vcpu, reason));
+
 DEFINE_EVENT(kvm_exit, kvm_exit,
 	     TP_PROTO(struct kvm_vcpu *vcpu, unsigned int reason),
 	     TP_ARGS(vcpu, reason));
@@ -149,6 +161,41 @@ TRACE_EVENT(kvm_aux,
 		      __entry->pc)
 );
 
+#define KVM_TRACE_IOCSR_READ_UNSATISFIED 0
+#define KVM_TRACE_IOCSR_READ 1
+#define KVM_TRACE_IOCSR_WRITE 2
+
+#define kvm_trace_symbol_iocsr \
+	{ KVM_TRACE_IOCSR_READ_UNSATISFIED, "unsatisfied-read" }, \
+	{ KVM_TRACE_IOCSR_READ, "read" }, \
+	{ KVM_TRACE_IOCSR_WRITE, "write" }
+
+TRACE_EVENT(kvm_iocsr,
+	TP_PROTO(int type, int len, u64 gpa, void *val),
+	TP_ARGS(type, len, gpa, val),
+
+	TP_STRUCT__entry(
+		__field(	u32,	type	)
+		__field(	u32,	len	)
+		__field(	u64,	gpa	)
+		__field(	u64,	val	)
+	),
+
+	TP_fast_assign(
+		__entry->type		= type;
+		__entry->len		= len;
+		__entry->gpa		= gpa;
+		__entry->val		= 0;
+		if (val)
+			memcpy(&__entry->val, val,
+			       min_t(u32, sizeof(__entry->val), len));
+	),
+
+	TP_printk("iocsr %s len %u gpa 0x%llx val 0x%llx",
+		  __print_symbolic(__entry->type, kvm_trace_symbol_iocsr),
+		  __entry->len, __entry->gpa, __entry->val)
+);
+
 TRACE_EVENT(kvm_vpid_change,
 	    TP_PROTO(struct kvm_vcpu *vcpu, unsigned long vpid),
 	    TP_ARGS(vcpu, vpid),
diff --git a/arch/loongarch/kvm/vcpu.c b/arch/loongarch/kvm/vcpu.c
index cab1818be68d..6d833599ef2e 100644
--- a/arch/loongarch/kvm/vcpu.c
+++ b/arch/loongarch/kvm/vcpu.c
@@ -4,7 +4,6 @@
  */
 
 #include <linux/kvm_host.h>
-#include <linux/entry-kvm.h>
 #include <asm/fpu.h>
 #include <asm/lbt.h>
 #include <asm/loongarch.h>
@@ -20,7 +19,13 @@ const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
 	STATS_DESC_COUNTER(VCPU, idle_exits),
 	STATS_DESC_COUNTER(VCPU, cpucfg_exits),
 	STATS_DESC_COUNTER(VCPU, signal_exits),
-	STATS_DESC_COUNTER(VCPU, hypercall_exits)
+	STATS_DESC_COUNTER(VCPU, hypercall_exits),
+	STATS_DESC_COUNTER(VCPU, ipi_read_exits),
+	STATS_DESC_COUNTER(VCPU, ipi_write_exits),
+	STATS_DESC_COUNTER(VCPU, eiointc_read_exits),
+	STATS_DESC_COUNTER(VCPU, eiointc_write_exits),
+	STATS_DESC_COUNTER(VCPU, pch_pic_read_exits),
+	STATS_DESC_COUNTER(VCPU, pch_pic_write_exits)
 };
 
 const struct kvm_stats_header kvm_vcpu_stats_header = {
@@ -127,6 +132,9 @@ static void kvm_lose_pmu(struct kvm_vcpu *vcpu)
 	 * Clear KVM_LARCH_PMU if the guest is not using PMU CSRs when
 	 * exiting the guest, so that the next time trap into the guest.
 	 * We don't need to deal with PMU CSRs contexts.
+	 *
+	 * Otherwise set the request bit KVM_REQ_PMU to restore guest PMU
+	 * before entering guest VM
 	 */
 	val = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL0);
 	val |= kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL1);
@@ -134,16 +142,12 @@ static void kvm_lose_pmu(struct kvm_vcpu *vcpu)
 	val |= kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL3);
 	if (!(val & KVM_PMU_EVENT_ENABLED))
 		vcpu->arch.aux_inuse &= ~KVM_LARCH_PMU;
+	else
+		kvm_make_request(KVM_REQ_PMU, vcpu);
 
 	kvm_restore_host_pmu(vcpu);
 }
 
-static void kvm_restore_pmu(struct kvm_vcpu *vcpu)
-{
-	if ((vcpu->arch.aux_inuse & KVM_LARCH_PMU))
-		kvm_make_request(KVM_REQ_PMU, vcpu);
-}
-
 static void kvm_check_pmu(struct kvm_vcpu *vcpu)
 {
 	if (kvm_check_request(KVM_REQ_PMU, vcpu)) {
@@ -240,16 +244,18 @@ static void kvm_late_check_requests(struct kvm_vcpu *vcpu)
  */
 static int kvm_enter_guest_check(struct kvm_vcpu *vcpu)
 {
-	int ret;
+	int idx, ret;
 
 	/*
 	 * Check conditions before entering the guest
 	 */
-	ret = xfer_to_guest_mode_handle_work(vcpu);
+	ret = kvm_xfer_to_guest_mode_handle_work(vcpu);
 	if (ret < 0)
 		return ret;
 
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
 	ret = kvm_check_requests(vcpu);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 
 	return ret;
 }
@@ -292,6 +298,10 @@ static int kvm_pre_enter_guest(struct kvm_vcpu *vcpu)
 		vcpu->arch.aux_inuse &= ~KVM_LARCH_SWCSR_LATEST;
 
 		if (kvm_request_pending(vcpu) || xfer_to_guest_mode_work_pending()) {
+			if (vcpu->arch.aux_inuse & KVM_LARCH_PMU) {
+				kvm_lose_pmu(vcpu);
+				kvm_make_request(KVM_REQ_PMU, vcpu);
+			}
 			/* make sure the vcpu mode has been written */
 			smp_store_mb(vcpu->mode, OUTSIDE_GUEST_MODE);
 			local_irq_enable();
@@ -309,7 +319,7 @@ static int kvm_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
 {
 	int ret = RESUME_GUEST;
 	unsigned long estat = vcpu->arch.host_estat;
-	u32 intr = estat & 0x1fff; /* Ignore NMI */
+	u32 intr = estat & CSR_ESTAT_IS;
 	u32 ecode = (estat & CSR_ESTAT_EXC) >> CSR_ESTAT_EXC_SHIFT;
 
 	vcpu->mode = OUTSIDE_GUEST_MODE;
@@ -359,6 +369,34 @@ int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
 
 bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu)
 {
+	unsigned long val;
+
+	preempt_disable();
+	val = gcsr_read(LOONGARCH_CSR_CRMD);
+	preempt_enable();
+
+	return (val & CSR_PRMD_PPLV) == PLV_KERN;
+}
+
+#ifdef CONFIG_GUEST_PERF_EVENTS
+unsigned long kvm_arch_vcpu_get_ip(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.pc;
+}
+
+/*
+ * Returns true if a Performance Monitoring Interrupt (PMI), a.k.a. perf event,
+ * arrived in guest context.  For LoongArch64, if PMU is not passthrough to VM,
+ * any event that arrives while a vCPU is loaded is considered to be "in guest".
+ */
+bool kvm_arch_pmi_in_guest(struct kvm_vcpu *vcpu)
+{
+	return (vcpu && !(vcpu->arch.aux_inuse & KVM_LARCH_PMU));
+}
+#endif
+
+bool kvm_arch_vcpu_preempted_in_kernel(struct kvm_vcpu *vcpu)
+{
 	return false;
 }
 
@@ -621,8 +659,7 @@ static int _kvm_get_cpucfg_mask(int id, u64 *v)
 		*v = GENMASK(31, 0);
 		return 0;
 	case LOONGARCH_CPUCFG1:
-		/* CPUCFG1_MSGINT is not supported by KVM */
-		*v = GENMASK(25, 0);
+		*v = GENMASK(26, 0);
 		return 0;
 	case LOONGARCH_CPUCFG2:
 		/* CPUCFG2 features unconditionally supported by KVM */
@@ -643,6 +680,8 @@ static int _kvm_get_cpucfg_mask(int id, u64 *v)
 			*v |= CPUCFG2_ARMBT;
 		if (cpu_has_lbt_mips)
 			*v |= CPUCFG2_MIPSBT;
+		if (cpu_has_ptw)
+			*v |= CPUCFG2_PTW;
 
 		return 0;
 	case LOONGARCH_CPUCFG3:
@@ -688,6 +727,10 @@ static int kvm_check_cpucfg(int id, u64 val)
 		return -EINVAL;
 
 	switch (id) {
+	case LOONGARCH_CPUCFG1:
+		if ((val & CPUCFG1_MSGINT) && !cpu_has_msgint)
+			return -EINVAL;
+		return 0;
 	case LOONGARCH_CPUCFG2:
 		if (!(val & CPUCFG2_LLFTP))
 			/* Guests must have a constant timer */
@@ -872,6 +915,13 @@ static int kvm_set_one_reg(struct kvm_vcpu *vcpu,
 			vcpu->arch.st.guest_addr = 0;
 			memset(&vcpu->arch.irq_pending, 0, sizeof(vcpu->arch.irq_pending));
 			memset(&vcpu->arch.irq_clear, 0, sizeof(vcpu->arch.irq_clear));
+
+			/*
+			 * When vCPU reset, clear the ESTAT and GINTC registers
+			 * Other CSR registers are cleared with function _kvm_setcsr().
+			 */
+			kvm_write_sw_gcsr(vcpu->arch.csr, LOONGARCH_CSR_GINTC, 0);
+			kvm_write_sw_gcsr(vcpu->arch.csr, LOONGARCH_CSR_ESTAT, 0);
 			break;
 		default:
 			ret = -EINVAL;
@@ -1239,9 +1289,11 @@ int kvm_own_lbt(struct kvm_vcpu *vcpu)
 		return -EINVAL;
 
 	preempt_disable();
-	set_csr_euen(CSR_EUEN_LBTEN);
-	_restore_lbt(&vcpu->arch.lbt);
-	vcpu->arch.aux_inuse |= KVM_LARCH_LBT;
+	if (!(vcpu->arch.aux_inuse & KVM_LARCH_LBT)) {
+		set_csr_euen(CSR_EUEN_LBTEN);
+		_restore_lbt(&vcpu->arch.lbt);
+		vcpu->arch.aux_inuse |= KVM_LARCH_LBT;
+	}
 	preempt_enable();
 
 	return 0;
@@ -1424,8 +1476,8 @@ int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
 	return 0;
 }
 
-long kvm_arch_vcpu_async_ioctl(struct file *filp,
-			       unsigned int ioctl, unsigned long arg)
+long kvm_arch_vcpu_unlocked_ioctl(struct file *filp, unsigned int ioctl,
+				  unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	struct kvm_vcpu *vcpu = filp->private_data;
@@ -1457,8 +1509,17 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 	vcpu->arch.vpid = 0;
 	vcpu->arch.flush_gpa = INVALID_GPA;
 
-	hrtimer_init(&vcpu->arch.swtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS_PINNED_HARD);
-	vcpu->arch.swtimer.function = kvm_swtimer_wakeup;
+	hrtimer_setup(&vcpu->arch.swtimer, kvm_swtimer_wakeup, CLOCK_MONOTONIC,
+		      HRTIMER_MODE_ABS_PINNED_HARD);
+
+	/* Get GPA (=HVA) of PGD for kvm hypervisor */
+	vcpu->arch.kvm_pgd = __pa(vcpu->kvm->arch.pgd);
+
+	/*
+	 * Get PGD for primary mmu, virtual address is used since there is
+	 * memory access after loading from CSR_PGD in tlb exception fast path.
+	 */
+	vcpu->arch.host_pgd = (unsigned long)vcpu->kvm->mm->pgd;
 
 	vcpu->arch.handle_exit = kvm_handle_exit;
 	vcpu->arch.guest_eentry = (unsigned long)kvm_loongarch_ops->exc_entry;
@@ -1546,14 +1607,8 @@ static int _kvm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 	/* Restore timer state regardless */
 	kvm_restore_timer(vcpu);
-
-	/* Control guest page CCA attribute */
-	change_csr_gcfg(CSR_GCFG_MATC_MASK, CSR_GCFG_MATC_ROOT);
 	kvm_make_request(KVM_REQ_STEAL_UPDATE, vcpu);
 
-	/* Restore hardware PMU CSRs */
-	kvm_restore_pmu(vcpu);
-
 	/* Don't bother restoring registers multiple times unless necessary */
 	if (vcpu->arch.aux_inuse & KVM_LARCH_HWCSR_USABLE)
 		return 0;
@@ -1605,6 +1660,12 @@ static int _kvm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_DMWIN2);
 	kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_DMWIN3);
 	kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_LLBCTL);
+	if (cpu_has_msgint) {
+		kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_ISR0);
+		kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_ISR1);
+		kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_ISR2);
+		kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_ISR3);
+	}
 
 	/* Restore Root.GINTC from unused Guest.GINTC register */
 	write_csr_gintc(csr->csrs[LOONGARCH_CSR_GINTC]);
@@ -1694,6 +1755,12 @@ static int _kvm_vcpu_put(struct kvm_vcpu *vcpu, int cpu)
 	kvm_save_hw_gcsr(csr, LOONGARCH_CSR_DMWIN1);
 	kvm_save_hw_gcsr(csr, LOONGARCH_CSR_DMWIN2);
 	kvm_save_hw_gcsr(csr, LOONGARCH_CSR_DMWIN3);
+	if (cpu_has_msgint) {
+		kvm_save_hw_gcsr(csr, LOONGARCH_CSR_ISR0);
+		kvm_save_hw_gcsr(csr, LOONGARCH_CSR_ISR1);
+		kvm_save_hw_gcsr(csr, LOONGARCH_CSR_ISR2);
+		kvm_save_hw_gcsr(csr, LOONGARCH_CSR_ISR3);
+	}
 
 	vcpu->arch.aux_inuse |= KVM_LARCH_SWCSR_LATEST;
 
@@ -1730,9 +1797,14 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		vcpu->mmio_needed = 0;
 	}
 
-	if (run->exit_reason == KVM_EXIT_LOONGARCH_IOCSR) {
+	switch (run->exit_reason) {
+	case KVM_EXIT_HYPERCALL:
+		kvm_complete_user_service(vcpu, run);
+		break;
+	case KVM_EXIT_LOONGARCH_IOCSR:
 		if (!run->iocsr_io.is_write)
 			kvm_complete_iocsr_read(vcpu, run);
+		break;
 	}
 
 	if (!vcpu->wants_to_run)
diff --git a/arch/loongarch/kvm/vm.c b/arch/loongarch/kvm/vm.c
index b8b3e1972d6e..194ccbcdc3b3 100644
--- a/arch/loongarch/kvm/vm.c
+++ b/arch/loongarch/kvm/vm.c
@@ -6,6 +6,7 @@
 #include <linux/kvm_host.h>
 #include <asm/kvm_mmu.h>
 #include <asm/kvm_vcpu.h>
+#include <asm/kvm_csr.h>
 #include <asm/kvm_eiointc.h>
 #include <asm/kvm_pch_pic.h>
 
@@ -24,6 +25,23 @@ const struct kvm_stats_header kvm_vm_stats_header = {
 					sizeof(kvm_vm_stats_desc),
 };
 
+static void kvm_vm_init_features(struct kvm *kvm)
+{
+	unsigned long val;
+
+	val = read_csr_gcfg();
+	if (val & CSR_GCFG_GPMP)
+		kvm->arch.kvm_features |= BIT(KVM_LOONGARCH_VM_FEAT_PMU);
+
+	/* Enable all PV features by default */
+	kvm->arch.pv_features = BIT(KVM_FEATURE_IPI);
+	kvm->arch.kvm_features = BIT(KVM_LOONGARCH_VM_FEAT_PV_IPI);
+	if (kvm_pvtime_supported()) {
+		kvm->arch.pv_features |= BIT(KVM_FEATURE_STEAL_TIME);
+		kvm->arch.kvm_features |= BIT(KVM_LOONGARCH_VM_FEAT_PV_STEALTIME);
+	}
+}
+
 int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 {
 	int i;
@@ -42,13 +60,13 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	spin_lock_init(&kvm->arch.phyid_map_lock);
 
 	kvm_init_vmcs(kvm);
+	kvm_vm_init_features(kvm);
 
-	/* Enable all PV features by default */
-	kvm->arch.pv_features = BIT(KVM_FEATURE_IPI);
-	if (kvm_pvtime_supported())
-		kvm->arch.pv_features |= BIT(KVM_FEATURE_STEAL_TIME);
-
-	kvm->arch.gpa_size = BIT(cpu_vabits - 1);
+	/*
+	 * cpu_vabits means user address space only (a half of total).
+	 * GPA size of VM is the same with the size of user address space.
+	 */
+	kvm->arch.gpa_size = BIT(cpu_vabits);
 	kvm->arch.root_level = CONFIG_PGTABLE_LEVELS - 1;
 	kvm->arch.invalid_ptes[0] = 0;
 	kvm->arch.invalid_ptes[1] = (unsigned long)invalid_pte_table;
@@ -132,14 +150,18 @@ static int kvm_vm_feature_has_attr(struct kvm *kvm, struct kvm_device_attr *attr
 		if (cpu_has_lbt_mips)
 			return 0;
 		return -ENXIO;
-	case KVM_LOONGARCH_VM_FEAT_PMU:
-		if (cpu_has_pmp)
+	case KVM_LOONGARCH_VM_FEAT_PTW:
+		if (cpu_has_ptw)
 			return 0;
 		return -ENXIO;
+	case KVM_LOONGARCH_VM_FEAT_MSGINT:
+		if (cpu_has_msgint)
+			return 0;
+		return -ENXIO;
+	case KVM_LOONGARCH_VM_FEAT_PMU:
 	case KVM_LOONGARCH_VM_FEAT_PV_IPI:
-		return 0;
 	case KVM_LOONGARCH_VM_FEAT_PV_STEALTIME:
-		if (kvm_pvtime_supported())
+		if (kvm_vm_support(&kvm->arch, attr->attr))
 			return 0;
 		return -ENXIO;
 	default:
diff --git a/arch/loongarch/lib/csum.c b/arch/loongarch/lib/csum.c
index a5e84b403c3b..bcc9d01d8c41 100644
--- a/arch/loongarch/lib/csum.c
+++ b/arch/loongarch/lib/csum.c
@@ -2,6 +2,7 @@
 // Copyright (C) 2019-2020 Arm Ltd.
 
 #include <linux/compiler.h>
+#include <linux/export.h>
 #include <linux/kasan-checks.h>
 #include <linux/kernel.h>
 
@@ -25,7 +26,7 @@ unsigned int __no_sanitize_address do_csum(const unsigned char *buff, int len)
 	const u64 *ptr;
 	u64 data, sum64 = 0;
 
-	if (unlikely(len == 0))
+	if (unlikely(len <= 0))
 		return 0;
 
 	offset = (unsigned long)buff & 7;
diff --git a/arch/loongarch/mm/fault.c b/arch/loongarch/mm/fault.c
index deefd9617d00..2c93d33356e5 100644
--- a/arch/loongarch/mm/fault.c
+++ b/arch/loongarch/mm/fault.c
@@ -215,6 +215,58 @@ static void __kprobes __do_page_fault(struct pt_regs *regs,
 		flags |= FAULT_FLAG_USER;
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+
+	if (!(flags & FAULT_FLAG_USER))
+		goto lock_mmap;
+
+	vma = lock_vma_under_rcu(mm, address);
+	if (!vma)
+		goto lock_mmap;
+
+	if (write) {
+		flags |= FAULT_FLAG_WRITE;
+		if (!(vma->vm_flags & VM_WRITE)) {
+			vma_end_read(vma);
+			si_code = SEGV_ACCERR;
+			count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+			goto bad_area_nosemaphore;
+		}
+	} else {
+		if (!(vma->vm_flags & VM_EXEC) && address == exception_era(regs)) {
+			vma_end_read(vma);
+			si_code = SEGV_ACCERR;
+			count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+			goto bad_area_nosemaphore;
+		}
+		if (!(vma->vm_flags & (VM_READ | VM_WRITE)) && address != exception_era(regs)) {
+			vma_end_read(vma);
+			si_code = SEGV_ACCERR;
+			count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+			goto bad_area_nosemaphore;
+		}
+	}
+
+	fault = handle_mm_fault(vma, address, flags | FAULT_FLAG_VMA_LOCK, regs);
+	if (!(fault & (VM_FAULT_RETRY | VM_FAULT_COMPLETED)))
+		vma_end_read(vma);
+
+	if (!(fault & VM_FAULT_RETRY)) {
+		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+		goto done;
+	}
+
+	count_vm_vma_lock_event(VMA_LOCK_RETRY);
+	if (fault & VM_FAULT_MAJOR)
+		flags |= FAULT_FLAG_TRIED;
+
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			no_context(regs, write, address);
+		return;
+	}
+lock_mmap:
+
 retry:
 	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (unlikely(!vma))
@@ -276,8 +328,10 @@ good_area:
 		 */
 		goto retry;
 	}
+	mmap_read_unlock(mm);
+
+done:
 	if (unlikely(fault & VM_FAULT_ERROR)) {
-		mmap_read_unlock(mm);
 		if (fault & VM_FAULT_OOM) {
 			do_out_of_memory(regs, write, address);
 			return;
@@ -290,8 +344,6 @@ good_area:
 		}
 		BUG();
 	}
-
-	mmap_read_unlock(mm);
 }
 
 asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
diff --git a/arch/loongarch/mm/hugetlbpage.c b/arch/loongarch/mm/hugetlbpage.c
index e4068906143b..02dad4624fe3 100644
--- a/arch/loongarch/mm/hugetlbpage.c
+++ b/arch/loongarch/mm/hugetlbpage.c
@@ -47,7 +47,8 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr,
 				pmd = pmd_offset(pud, addr);
 		}
 	}
-	return (pte_t *) pmd;
+
+	return (!pmd || pmd_none(pmdp_get(pmd))) ? NULL : (pte_t *) pmd;
 }
 
 uint64_t pmd_to_entrylo(unsigned long pmd_val)
diff --git a/arch/loongarch/mm/init.c b/arch/loongarch/mm/init.c
index 188b52bbb254..6bfd4b8dad1b 100644
--- a/arch/loongarch/mm/init.c
+++ b/arch/loongarch/mm/init.c
@@ -60,14 +60,10 @@ int __ref page_is_ram(unsigned long pfn)
 	return memblock_is_memory(addr) && !memblock_is_reserved(addr);
 }
 
-#ifndef CONFIG_NUMA
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 
-#ifdef CONFIG_ZONE_DMA
-	max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
-#endif
 #ifdef CONFIG_ZONE_DMA32
 	max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
 #endif
@@ -76,15 +72,6 @@ void __init paging_init(void)
 	free_area_init(max_zone_pfns);
 }
 
-void __init mem_init(void)
-{
-	max_mapnr = max_low_pfn;
-	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
-
-	memblock_free_all();
-}
-#endif /* !CONFIG_NUMA */
-
 void __ref free_initmem(void)
 {
 	free_initmem_default(POISON_FREE_INITMEM);
@@ -117,14 +104,6 @@ void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
 		page += vmem_altmap_offset(altmap);
 	__remove_pages(start_pfn, nr_pages, altmap);
 }
-
-#ifdef CONFIG_NUMA
-int memory_add_physaddr_to_nid(u64 start)
-{
-	return pa_to_nid(start);
-}
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-#endif
 #endif
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
@@ -174,9 +153,7 @@ pte_t * __init populate_kernel_pte(unsigned long addr)
 	pmd_t *pmd;
 
 	if (p4d_none(p4dp_get(p4d))) {
-		pud = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-		if (!pud)
-			panic("%s: Failed to allocate memory\n", __func__);
+		pud = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 		p4d_populate(&init_mm, p4d, pud);
 #ifndef __PAGETABLE_PUD_FOLDED
 		pud_init(pud);
@@ -185,9 +162,7 @@ pte_t * __init populate_kernel_pte(unsigned long addr)
 
 	pud = pud_offset(p4d, addr);
 	if (pud_none(pudp_get(pud))) {
-		pmd = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-		if (!pmd)
-			panic("%s: Failed to allocate memory\n", __func__);
+		pmd = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 		pud_populate(&init_mm, pud, pmd);
 #ifndef __PAGETABLE_PMD_FOLDED
 		pmd_init(pmd);
@@ -198,10 +173,7 @@ pte_t * __init populate_kernel_pte(unsigned long addr)
 	if (!pmd_present(pmdp_get(pmd))) {
 		pte_t *pte;
 
-		pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-		if (!pte)
-			panic("%s: Failed to allocate memory\n", __func__);
-
+		pte = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 		pmd_populate_kernel(&init_mm, pmd, pte);
 		kernel_pte_init(pte);
 	}
diff --git a/arch/loongarch/mm/ioremap.c b/arch/loongarch/mm/ioremap.c
index 70ca73019811..27c336959fe8 100644
--- a/arch/loongarch/mm/ioremap.c
+++ b/arch/loongarch/mm/ioremap.c
@@ -6,7 +6,7 @@
 #include <asm/io.h>
 #include <asm-generic/early_ioremap.h>
 
-void __init __iomem *early_ioremap(u64 phys_addr, unsigned long size)
+void __init __iomem *early_ioremap(phys_addr_t phys_addr, unsigned long size)
 {
 	return ((void __iomem *)TO_CACHE(phys_addr));
 }
@@ -16,12 +16,12 @@ void __init early_iounmap(void __iomem *addr, unsigned long size)
 
 }
 
-void *early_memremap_ro(resource_size_t phys_addr, unsigned long size)
+void * __init early_memremap_ro(resource_size_t phys_addr, unsigned long size)
 {
 	return early_memremap(phys_addr, size);
 }
 
-void *early_memremap_prot(resource_size_t phys_addr, unsigned long size,
+void * __init early_memremap_prot(resource_size_t phys_addr, unsigned long size,
 		    unsigned long prot_val)
 {
 	return early_memremap(phys_addr, size);
diff --git a/arch/loongarch/mm/kasan_init.c b/arch/loongarch/mm/kasan_init.c
index d2681272d8f0..170da98ad4f5 100644
--- a/arch/loongarch/mm/kasan_init.c
+++ b/arch/loongarch/mm/kasan_init.c
@@ -40,11 +40,9 @@ static pgd_t kasan_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
 #define __pte_none(early, pte) (early ? pte_none(pte) : \
 ((pte_val(pte) & _PFN_MASK) == (unsigned long)__pa(kasan_early_shadow_page)))
 
-bool kasan_early_stage = true;
-
 void *kasan_mem_to_shadow(const void *addr)
 {
-	if (!kasan_arch_is_ready()) {
+	if (!kasan_enabled()) {
 		return (void *)(kasan_early_shadow_page);
 	} else {
 		unsigned long maddr = (unsigned long)addr;
@@ -298,7 +296,8 @@ void __init kasan_init(void)
 	kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
 					kasan_mem_to_shadow((void *)KFENCE_AREA_END));
 
-	kasan_early_stage = false;
+	/* Enable KASAN here before kasan_mem_to_shadow(). */
+	kasan_init_generic();
 
 	/* Populate the linear mapping */
 	for_each_mem_range(i, &pa_start, &pa_end) {
@@ -329,5 +328,4 @@ void __init kasan_init(void)
 
 	/* At this point kasan is fully initialized. Enable error messages */
 	init_task.kasan_depth = 0;
-	pr_info("KernelAddressSanitizer initialized.\n");
 }
diff --git a/arch/loongarch/mm/mmap.c b/arch/loongarch/mm/mmap.c
index 914e82ff3f65..1df9e99582cc 100644
--- a/arch/loongarch/mm/mmap.c
+++ b/arch/loongarch/mm/mmap.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
 #include <linux/export.h>
+#include <linux/hugetlb.h>
 #include <linux/io.h>
 #include <linux/kfence.h>
 #include <linux/memblock.h>
@@ -63,8 +64,11 @@ static unsigned long arch_get_unmapped_area_common(struct file *filp,
 	}
 
 	info.length = len;
-	info.align_mask = do_color_align ? (PAGE_MASK & SHM_ALIGN_MASK) : 0;
 	info.align_offset = pgoff << PAGE_SHIFT;
+	if (filp && is_file_hugepages(filp))
+		info.align_mask = huge_page_mask_align(filp);
+	else
+		info.align_mask = do_color_align ? (PAGE_MASK & SHM_ALIGN_MASK) : 0;
 
 	if (dir == DOWN) {
 		info.flags = VM_UNMAPPED_AREA_TOPDOWN;
diff --git a/arch/loongarch/mm/pageattr.c b/arch/loongarch/mm/pageattr.c
index bf8678248444..f5e910b68229 100644
--- a/arch/loongarch/mm/pageattr.c
+++ b/arch/loongarch/mm/pageattr.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2024 Loongson Technology Corporation Limited
  */
 
+#include <linux/memblock.h>
 #include <linux/pagewalk.h>
 #include <linux/pgtable.h>
 #include <asm/set_memory.h>
@@ -117,7 +118,7 @@ static int __set_memory(unsigned long addr, int numpages, pgprot_t set_mask, pgp
 		return 0;
 
 	mmap_write_lock(&init_mm);
-	ret = walk_page_range_novma(&init_mm, start, end, &pageattr_ops, NULL, &masks);
+	ret = walk_kernel_page_table_range(start, end, &pageattr_ops, NULL, &masks);
 	mmap_write_unlock(&init_mm);
 
 	flush_tlb_kernel_range(start, end);
@@ -167,7 +168,7 @@ bool kernel_page_present(struct page *page)
 	unsigned long addr = (unsigned long)page_address(page);
 
 	if (addr < vm_map_base)
-		return true;
+		return memblock_is_memory(__pa(addr));
 
 	pgd = pgd_offset_k(addr);
 	if (pgd_none(pgdp_get(pgd)))
diff --git a/arch/loongarch/mm/pgtable.c b/arch/loongarch/mm/pgtable.c
index 3fa69b23ff84..352d9b2e02ab 100644
--- a/arch/loongarch/mm/pgtable.c
+++ b/arch/loongarch/mm/pgtable.c
@@ -23,11 +23,10 @@ EXPORT_SYMBOL(tlb_virt_to_page);
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	pgd_t *init, *ret = NULL;
-	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL & ~__GFP_HIGHMEM, 0);
+	pgd_t *init, *ret;
 
-	if (ptdesc) {
-		ret = (pgd_t *)ptdesc_address(ptdesc);
+	ret = __pgd_alloc(mm, 0);
+	if (ret) {
 		init = pgd_offset(&init_mm, 0UL);
 		pgd_init(ret);
 		memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
@@ -136,15 +135,6 @@ void kernel_pte_init(void *addr)
 	} while (p != end);
 }
 
-pmd_t mk_pmd(struct page *page, pgprot_t prot)
-{
-	pmd_t pmd;
-
-	pmd_val(pmd) = (page_to_pfn(page) << PFN_PTE_SHIFT) | pgprot_val(prot);
-
-	return pmd;
-}
-
 void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 		pmd_t *pmdp, pmd_t pmd)
 {
diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c
index dd350cba1252..8dc58781b8eb 100644
--- a/arch/loongarch/net/bpf_jit.c
+++ b/arch/loongarch/net/bpf_jit.c
@@ -4,13 +4,20 @@
  *
  * Copyright (C) 2022 Loongson Technology Corporation Limited
  */
+#include <linux/memory.h>
 #include "bpf_jit.h"
 
-#define REG_TCC		LOONGARCH_GPR_A6
-#define TCC_SAVED	LOONGARCH_GPR_S5
+#define LOONGARCH_MAX_REG_ARGS 8
+
+#define LOONGARCH_LONG_JUMP_NINSNS 5
+#define LOONGARCH_LONG_JUMP_NBYTES (LOONGARCH_LONG_JUMP_NINSNS * 4)
 
-#define SAVE_RA		BIT(0)
-#define SAVE_TCC	BIT(1)
+#define LOONGARCH_FENTRY_NINSNS 2
+#define LOONGARCH_FENTRY_NBYTES (LOONGARCH_FENTRY_NINSNS * 4)
+#define LOONGARCH_BPF_FENTRY_NBYTES (LOONGARCH_LONG_JUMP_NINSNS * 4)
+
+#define REG_TCC		LOONGARCH_GPR_A6
+#define BPF_TAIL_CALL_CNT_PTR_STACK_OFF(stack) (round_up(stack, 16) - 80)
 
 static const int regmap[] = {
 	/* return value from in-kernel function, and exit value for eBPF program */
@@ -32,32 +39,57 @@ static const int regmap[] = {
 	[BPF_REG_AX] = LOONGARCH_GPR_T0,
 };
 
-static void mark_call(struct jit_ctx *ctx)
+static void prepare_bpf_tail_call_cnt(struct jit_ctx *ctx, int *store_offset)
 {
-	ctx->flags |= SAVE_RA;
-}
+	const struct bpf_prog *prog = ctx->prog;
+	const bool is_main_prog = !bpf_is_subprog(prog);
 
-static void mark_tail_call(struct jit_ctx *ctx)
-{
-	ctx->flags |= SAVE_TCC;
-}
+	if (is_main_prog) {
+		/*
+		 * LOONGARCH_GPR_T3 = MAX_TAIL_CALL_CNT
+		 * if (REG_TCC > T3 )
+		 *	std REG_TCC -> LOONGARCH_GPR_SP + store_offset
+		 * else
+		 *	std REG_TCC -> LOONGARCH_GPR_SP + store_offset
+		 *	REG_TCC = LOONGARCH_GPR_SP + store_offset
+		 *
+		 * std REG_TCC -> LOONGARCH_GPR_SP + store_offset
+		 *
+		 * The purpose of this code is to first push the TCC into stack,
+		 * and then push the address of TCC into stack.
+		 * In cases where bpf2bpf and tailcall are used in combination,
+		 * the value in REG_TCC may be a count or an address,
+		 * these two cases need to be judged and handled separately.
+		 */
+		emit_insn(ctx, addid, LOONGARCH_GPR_T3, LOONGARCH_GPR_ZERO, MAX_TAIL_CALL_CNT);
+		*store_offset -= sizeof(long);
 
-static bool seen_call(struct jit_ctx *ctx)
-{
-	return (ctx->flags & SAVE_RA);
-}
+		emit_cond_jmp(ctx, BPF_JGT, REG_TCC, LOONGARCH_GPR_T3, 4);
 
-static bool seen_tail_call(struct jit_ctx *ctx)
-{
-	return (ctx->flags & SAVE_TCC);
-}
+		/*
+		 * If REG_TCC < MAX_TAIL_CALL_CNT, the value in REG_TCC is a count,
+		 * push tcc into stack
+		 */
+		emit_insn(ctx, std, REG_TCC, LOONGARCH_GPR_SP, *store_offset);
 
-static u8 tail_call_reg(struct jit_ctx *ctx)
-{
-	if (seen_call(ctx))
-		return TCC_SAVED;
+		/* Push the address of TCC into the REG_TCC */
+		emit_insn(ctx, addid, REG_TCC, LOONGARCH_GPR_SP, *store_offset);
 
-	return REG_TCC;
+		emit_uncond_jmp(ctx, 2);
+
+		/*
+		 * If REG_TCC > MAX_TAIL_CALL_CNT, the value in REG_TCC is an address,
+		 * push tcc_ptr into stack
+		 */
+		emit_insn(ctx, std, REG_TCC, LOONGARCH_GPR_SP, *store_offset);
+	} else {
+		*store_offset -= sizeof(long);
+		emit_insn(ctx, std, REG_TCC, LOONGARCH_GPR_SP, *store_offset);
+	}
+
+	/* Push tcc_ptr into stack */
+	*store_offset -= sizeof(long);
+	emit_insn(ctx, std, REG_TCC, LOONGARCH_GPR_SP, *store_offset);
 }
 
 /*
@@ -80,6 +112,10 @@ static u8 tail_call_reg(struct jit_ctx *ctx)
  *                            |           $s4           |
  *                            +-------------------------+
  *                            |           $s5           |
+ *                            +-------------------------+
+ *                            |           tcc           |
+ *                            +-------------------------+
+ *                            |           tcc_ptr       |
  *                            +-------------------------+ <--BPF_REG_FP
  *                            |  prog->aux->stack_depth |
  *                            |        (optional)       |
@@ -88,22 +124,32 @@ static u8 tail_call_reg(struct jit_ctx *ctx)
  */
 static void build_prologue(struct jit_ctx *ctx)
 {
-	int stack_adjust = 0, store_offset, bpf_stack_adjust;
+	int i, stack_adjust = 0, store_offset, bpf_stack_adjust;
+	const struct bpf_prog *prog = ctx->prog;
+	const bool is_main_prog = !bpf_is_subprog(prog);
 
 	bpf_stack_adjust = round_up(ctx->prog->aux->stack_depth, 16);
 
-	/* To store ra, fp, s0, s1, s2, s3, s4 and s5. */
+	/* To store ra, fp, s0, s1, s2, s3, s4, s5 */
 	stack_adjust += sizeof(long) * 8;
 
+	/* To store tcc and tcc_ptr */
+	stack_adjust += sizeof(long) * 2;
+
 	stack_adjust = round_up(stack_adjust, 16);
 	stack_adjust += bpf_stack_adjust;
 
+	/* Reserve space for the move_imm + jirl instruction */
+	for (i = 0; i < LOONGARCH_LONG_JUMP_NINSNS; i++)
+		emit_insn(ctx, nop);
+
 	/*
-	 * First instruction initializes the tail call count (TCC).
-	 * On tail call we skip this instruction, and the TCC is
-	 * passed in REG_TCC from the caller.
+	 * First instruction initializes the tail call count (TCC)
+	 * register to zero. On tail call we skip this instruction,
+	 * and the TCC is passed in REG_TCC from the caller.
 	 */
-	emit_insn(ctx, addid, REG_TCC, LOONGARCH_GPR_ZERO, MAX_TAIL_CALL_CNT);
+	if (is_main_prog)
+		emit_insn(ctx, addid, REG_TCC, LOONGARCH_GPR_ZERO, 0);
 
 	emit_insn(ctx, addid, LOONGARCH_GPR_SP, LOONGARCH_GPR_SP, -stack_adjust);
 
@@ -131,18 +177,13 @@ static void build_prologue(struct jit_ctx *ctx)
 	store_offset -= sizeof(long);
 	emit_insn(ctx, std, LOONGARCH_GPR_S5, LOONGARCH_GPR_SP, store_offset);
 
+	prepare_bpf_tail_call_cnt(ctx, &store_offset);
+
 	emit_insn(ctx, addid, LOONGARCH_GPR_FP, LOONGARCH_GPR_SP, stack_adjust);
 
 	if (bpf_stack_adjust)
 		emit_insn(ctx, addid, regmap[BPF_REG_FP], LOONGARCH_GPR_SP, bpf_stack_adjust);
 
-	/*
-	 * Program contains calls and tail calls, so REG_TCC need
-	 * to be saved across calls.
-	 */
-	if (seen_tail_call(ctx) && seen_call(ctx))
-		move_reg(ctx, TCC_SAVED, REG_TCC);
-
 	ctx->stack_size = stack_adjust;
 }
 
@@ -175,19 +216,29 @@ static void __build_epilogue(struct jit_ctx *ctx, bool is_tail_call)
 	load_offset -= sizeof(long);
 	emit_insn(ctx, ldd, LOONGARCH_GPR_S5, LOONGARCH_GPR_SP, load_offset);
 
+	/*
+	 * When push into the stack, follow the order of tcc then tcc_ptr.
+	 * When pop from the stack, first pop tcc_ptr then followed by tcc.
+	 */
+	load_offset -= 2 * sizeof(long);
+	emit_insn(ctx, ldd, REG_TCC, LOONGARCH_GPR_SP, load_offset);
+
+	load_offset += sizeof(long);
+	emit_insn(ctx, ldd, REG_TCC, LOONGARCH_GPR_SP, load_offset);
+
 	emit_insn(ctx, addid, LOONGARCH_GPR_SP, LOONGARCH_GPR_SP, stack_adjust);
 
 	if (!is_tail_call) {
 		/* Set return value */
 		emit_insn(ctx, addiw, LOONGARCH_GPR_A0, regmap[BPF_REG_0], 0);
 		/* Return to the caller */
-		emit_insn(ctx, jirl, LOONGARCH_GPR_RA, LOONGARCH_GPR_ZERO, 0);
+		emit_insn(ctx, jirl, LOONGARCH_GPR_ZERO, LOONGARCH_GPR_RA, 0);
 	} else {
 		/*
 		 * Call the next bpf prog and skip the first instruction
 		 * of TCC initialization.
 		 */
-		emit_insn(ctx, jirl, LOONGARCH_GPR_T3, LOONGARCH_GPR_ZERO, 1);
+		emit_insn(ctx, jirl, LOONGARCH_GPR_ZERO, LOONGARCH_GPR_T3, 6);
 	}
 }
 
@@ -206,12 +257,10 @@ bool bpf_jit_supports_far_kfunc_call(void)
 	return true;
 }
 
-/* initialized on the first pass of build_body() */
-static int out_offset = -1;
-static int emit_bpf_tail_call(struct jit_ctx *ctx)
+static int emit_bpf_tail_call(struct jit_ctx *ctx, int insn)
 {
-	int off;
-	u8 tcc = tail_call_reg(ctx);
+	int off, tc_ninsn = 0;
+	int tcc_ptr_off = BPF_TAIL_CALL_CNT_PTR_STACK_OFF(ctx->stack_size);
 	u8 a1 = LOONGARCH_GPR_A1;
 	u8 a2 = LOONGARCH_GPR_A2;
 	u8 t1 = LOONGARCH_GPR_T1;
@@ -220,7 +269,7 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx)
 	const int idx0 = ctx->idx;
 
 #define cur_offset (ctx->idx - idx0)
-#define jmp_offset (out_offset - (cur_offset))
+#define jmp_offset (tc_ninsn - (cur_offset))
 
 	/*
 	 * a0: &ctx
@@ -230,6 +279,7 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx)
 	 * if (index >= array->map.max_entries)
 	 *	 goto out;
 	 */
+	tc_ninsn = insn ? ctx->offset[insn+1] - ctx->offset[insn] : ctx->offset[0];
 	off = offsetof(struct bpf_array, map.max_entries);
 	emit_insn(ctx, ldwu, t1, a1, off);
 	/* bgeu $a2, $t1, jmp_offset */
@@ -237,11 +287,15 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx)
 		goto toofar;
 
 	/*
-	 * if (--TCC < 0)
-	 *	 goto out;
+	 * if ((*tcc_ptr)++ >= MAX_TAIL_CALL_CNT)
+	 *      goto out;
 	 */
-	emit_insn(ctx, addid, REG_TCC, tcc, -1);
-	if (emit_tailcall_jmp(ctx, BPF_JSLT, REG_TCC, LOONGARCH_GPR_ZERO, jmp_offset) < 0)
+	emit_insn(ctx, ldd, REG_TCC, LOONGARCH_GPR_SP, tcc_ptr_off);
+	emit_insn(ctx, ldd, t3, REG_TCC, 0);
+	emit_insn(ctx, addid, t3, t3, 1);
+	emit_insn(ctx, std, t3, REG_TCC, 0);
+	emit_insn(ctx, addid, t2, LOONGARCH_GPR_ZERO, MAX_TAIL_CALL_CNT);
+	if (emit_tailcall_jmp(ctx, BPF_JSGT, t3, t2, jmp_offset) < 0)
 		goto toofar;
 
 	/*
@@ -261,15 +315,6 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx)
 	emit_insn(ctx, ldd, t3, t2, off);
 	__build_epilogue(ctx, true);
 
-	/* out: */
-	if (out_offset == -1)
-		out_offset = cur_offset;
-	if (cur_offset != out_offset) {
-		pr_err_once("tail_call out_offset = %d, expected %d!\n",
-			    cur_offset, out_offset);
-		return -1;
-	}
-
 	return 0;
 
 toofar:
@@ -461,7 +506,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 	u64 func_addr;
 	bool func_addr_fixed, sign_extend;
 	int i = insn - ctx->prog->insnsi;
-	int ret, jmp_offset;
+	int ret, jmp_offset, tcc_ptr_off;
 	const u8 code = insn->code;
 	const u8 cond = BPF_OP(code);
 	const u8 t1 = LOONGARCH_GPR_T1;
@@ -482,13 +527,11 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 			emit_zext_32(ctx, dst, is32);
 			break;
 		case 8:
-			move_reg(ctx, t1, src);
-			emit_insn(ctx, extwb, dst, t1);
+			emit_insn(ctx, extwb, dst, src);
 			emit_zext_32(ctx, dst, is32);
 			break;
 		case 16:
-			move_reg(ctx, t1, src);
-			emit_insn(ctx, extwh, dst, t1);
+			emit_insn(ctx, extwh, dst, src);
 			emit_zext_32(ctx, dst, is32);
 			break;
 		case 32:
@@ -897,21 +940,27 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 
 	/* function call */
 	case BPF_JMP | BPF_CALL:
-		mark_call(ctx);
 		ret = bpf_jit_get_func_addr(ctx->prog, insn, extra_pass,
 					    &func_addr, &func_addr_fixed);
 		if (ret < 0)
 			return ret;
 
+		if (insn->src_reg == BPF_PSEUDO_CALL) {
+			tcc_ptr_off = BPF_TAIL_CALL_CNT_PTR_STACK_OFF(ctx->stack_size);
+			emit_insn(ctx, ldd, REG_TCC, LOONGARCH_GPR_SP, tcc_ptr_off);
+		}
+
 		move_addr(ctx, t1, func_addr);
-		emit_insn(ctx, jirl, t1, LOONGARCH_GPR_RA, 0);
-		move_reg(ctx, regmap[BPF_REG_0], LOONGARCH_GPR_A0);
+		emit_insn(ctx, jirl, LOONGARCH_GPR_RA, t1, 0);
+
+		if (insn->src_reg != BPF_PSEUDO_CALL)
+			move_reg(ctx, regmap[BPF_REG_0], LOONGARCH_GPR_A0);
+
 		break;
 
 	/* tail call */
 	case BPF_JMP | BPF_TAIL_CALL:
-		mark_tail_call(ctx);
-		if (emit_bpf_tail_call(ctx) < 0)
+		if (emit_bpf_tail_call(ctx, i) < 0)
 			return -EINVAL;
 		break;
 
@@ -930,7 +979,10 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext
 	{
 		const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm;
 
-		move_imm(ctx, dst, imm64, is32);
+		if (bpf_pseudo_func(insn))
+			move_addr(ctx, dst, imm64);
+		else
+			move_imm(ctx, dst, imm64, is32);
 		return 1;
 	}
 
@@ -1172,12 +1224,572 @@ static int validate_code(struct jit_ctx *ctx)
 			return -1;
 	}
 
+	return 0;
+}
+
+static int validate_ctx(struct jit_ctx *ctx)
+{
+	if (validate_code(ctx))
+		return -1;
+
 	if (WARN_ON_ONCE(ctx->num_exentries != ctx->prog->aux->num_exentries))
 		return -1;
 
 	return 0;
 }
 
+static int emit_jump_and_link(struct jit_ctx *ctx, u8 rd, u64 target)
+{
+	if (!target) {
+		pr_err("bpf_jit: jump target address is error\n");
+		return -EFAULT;
+	}
+
+	move_imm(ctx, LOONGARCH_GPR_T1, target, false);
+	emit_insn(ctx, jirl, rd, LOONGARCH_GPR_T1, 0);
+
+	return 0;
+}
+
+static int emit_jump_or_nops(void *target, void *ip, u32 *insns, bool is_call)
+{
+	int i;
+	struct jit_ctx ctx;
+
+	ctx.idx = 0;
+	ctx.image = (union loongarch_instruction *)insns;
+
+	if (!target) {
+		for (i = 0; i < LOONGARCH_LONG_JUMP_NINSNS; i++)
+			emit_insn((&ctx), nop);
+		return 0;
+	}
+
+	return emit_jump_and_link(&ctx, is_call ? LOONGARCH_GPR_T0 : LOONGARCH_GPR_ZERO, (u64)target);
+}
+
+static int emit_call(struct jit_ctx *ctx, u64 addr)
+{
+	return emit_jump_and_link(ctx, LOONGARCH_GPR_RA, addr);
+}
+
+void *bpf_arch_text_copy(void *dst, void *src, size_t len)
+{
+	int ret;
+
+	mutex_lock(&text_mutex);
+	ret = larch_insn_text_copy(dst, src, len);
+	mutex_unlock(&text_mutex);
+
+	return ret ? ERR_PTR(-EINVAL) : dst;
+}
+
+int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type old_t,
+		       enum bpf_text_poke_type new_t, void *old_addr,
+		       void *new_addr)
+{
+	int ret;
+	bool is_call;
+	u32 old_insns[LOONGARCH_LONG_JUMP_NINSNS] = {[0 ... 4] = INSN_NOP};
+	u32 new_insns[LOONGARCH_LONG_JUMP_NINSNS] = {[0 ... 4] = INSN_NOP};
+
+	/* Only poking bpf text is supported. Since kernel function entry
+	 * is set up by ftrace, we rely on ftrace to poke kernel functions.
+	 */
+	if (!is_bpf_text_address((unsigned long)ip))
+		return -ENOTSUPP;
+
+	is_call = old_t == BPF_MOD_CALL;
+	ret = emit_jump_or_nops(old_addr, ip, old_insns, is_call);
+	if (ret)
+		return ret;
+
+	if (memcmp(ip, old_insns, LOONGARCH_LONG_JUMP_NBYTES))
+		return -EFAULT;
+
+	is_call = new_t == BPF_MOD_CALL;
+	ret = emit_jump_or_nops(new_addr, ip, new_insns, is_call);
+	if (ret)
+		return ret;
+
+	mutex_lock(&text_mutex);
+	if (memcmp(ip, new_insns, LOONGARCH_LONG_JUMP_NBYTES))
+		ret = larch_insn_text_copy(ip, new_insns, LOONGARCH_LONG_JUMP_NBYTES);
+	mutex_unlock(&text_mutex);
+
+	return ret;
+}
+
+int bpf_arch_text_invalidate(void *dst, size_t len)
+{
+	int i;
+	int ret = 0;
+	u32 *inst;
+
+	inst = kvmalloc(len, GFP_KERNEL);
+	if (!inst)
+		return -ENOMEM;
+
+	for (i = 0; i < (len / sizeof(u32)); i++)
+		inst[i] = INSN_BREAK;
+
+	mutex_lock(&text_mutex);
+	if (larch_insn_text_copy(dst, inst, len))
+		ret = -EINVAL;
+	mutex_unlock(&text_mutex);
+
+	kvfree(inst);
+
+	return ret;
+}
+
+static void store_args(struct jit_ctx *ctx, int nargs, int args_off)
+{
+	int i;
+
+	for (i = 0; i < nargs; i++) {
+		emit_insn(ctx, std, LOONGARCH_GPR_A0 + i, LOONGARCH_GPR_FP, -args_off);
+		args_off -= 8;
+	}
+}
+
+static void restore_args(struct jit_ctx *ctx, int nargs, int args_off)
+{
+	int i;
+
+	for (i = 0; i < nargs; i++) {
+		emit_insn(ctx, ldd, LOONGARCH_GPR_A0 + i, LOONGARCH_GPR_FP, -args_off);
+		args_off -= 8;
+	}
+}
+
+static int invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
+			   int args_off, int retval_off, int run_ctx_off, bool save_ret)
+{
+	int ret;
+	u32 *branch;
+	struct bpf_prog *p = l->link.prog;
+	int cookie_off = offsetof(struct bpf_tramp_run_ctx, bpf_cookie);
+
+	if (l->cookie) {
+		move_imm(ctx, LOONGARCH_GPR_T1, l->cookie, false);
+		emit_insn(ctx, std, LOONGARCH_GPR_T1, LOONGARCH_GPR_FP, -run_ctx_off + cookie_off);
+	} else {
+		emit_insn(ctx, std, LOONGARCH_GPR_ZERO, LOONGARCH_GPR_FP, -run_ctx_off + cookie_off);
+	}
+
+	/* arg1: prog */
+	move_imm(ctx, LOONGARCH_GPR_A0, (const s64)p, false);
+	/* arg2: &run_ctx */
+	emit_insn(ctx, addid, LOONGARCH_GPR_A1, LOONGARCH_GPR_FP, -run_ctx_off);
+	ret = emit_call(ctx, (const u64)bpf_trampoline_enter(p));
+	if (ret)
+		return ret;
+
+	/* store prog start time */
+	move_reg(ctx, LOONGARCH_GPR_S1, LOONGARCH_GPR_A0);
+
+	/*
+	 * if (__bpf_prog_enter(prog) == 0)
+	 *      goto skip_exec_of_prog;
+	 */
+	branch = (u32 *)ctx->image + ctx->idx;
+	/* nop reserved for conditional jump */
+	emit_insn(ctx, nop);
+
+	/* arg1: &args_off */
+	emit_insn(ctx, addid, LOONGARCH_GPR_A0, LOONGARCH_GPR_FP, -args_off);
+	if (!p->jited)
+		move_imm(ctx, LOONGARCH_GPR_A1, (const s64)p->insnsi, false);
+	ret = emit_call(ctx, (const u64)p->bpf_func);
+	if (ret)
+		return ret;
+
+	if (save_ret) {
+		emit_insn(ctx, std, LOONGARCH_GPR_A0, LOONGARCH_GPR_FP, -retval_off);
+		emit_insn(ctx, std, regmap[BPF_REG_0], LOONGARCH_GPR_FP, -(retval_off - 8));
+	}
+
+	/* update branch with beqz */
+	if (ctx->image) {
+		int offset = (void *)(&ctx->image[ctx->idx]) - (void *)branch;
+		*branch = larch_insn_gen_beq(LOONGARCH_GPR_A0, LOONGARCH_GPR_ZERO, offset);
+	}
+
+	/* arg1: prog */
+	move_imm(ctx, LOONGARCH_GPR_A0, (const s64)p, false);
+	/* arg2: prog start time */
+	move_reg(ctx, LOONGARCH_GPR_A1, LOONGARCH_GPR_S1);
+	/* arg3: &run_ctx */
+	emit_insn(ctx, addid, LOONGARCH_GPR_A2, LOONGARCH_GPR_FP, -run_ctx_off);
+	ret = emit_call(ctx, (const u64)bpf_trampoline_exit(p));
+
+	return ret;
+}
+
+static void invoke_bpf_mod_ret(struct jit_ctx *ctx, struct bpf_tramp_links *tl,
+			       int args_off, int retval_off, int run_ctx_off, u32 **branches)
+{
+	int i;
+
+	emit_insn(ctx, std, LOONGARCH_GPR_ZERO, LOONGARCH_GPR_FP, -retval_off);
+	for (i = 0; i < tl->nr_links; i++) {
+		invoke_bpf_prog(ctx, tl->links[i], args_off, retval_off, run_ctx_off, true);
+		emit_insn(ctx, ldd, LOONGARCH_GPR_T1, LOONGARCH_GPR_FP, -retval_off);
+		branches[i] = (u32 *)ctx->image + ctx->idx;
+		emit_insn(ctx, nop);
+	}
+}
+
+void *arch_alloc_bpf_trampoline(unsigned int size)
+{
+	return bpf_prog_pack_alloc(size, jit_fill_hole);
+}
+
+void arch_free_bpf_trampoline(void *image, unsigned int size)
+{
+	bpf_prog_pack_free(image, size);
+}
+
+/*
+ * Sign-extend the register if necessary
+ */
+static void sign_extend(struct jit_ctx *ctx, int rd, int rj, u8 size, bool sign)
+{
+	/* ABI requires unsigned char/short to be zero-extended */
+	if (!sign && (size == 1 || size == 2)) {
+		if (rd != rj)
+			move_reg(ctx, rd, rj);
+		return;
+	}
+
+	switch (size) {
+	case 1:
+		emit_insn(ctx, extwb, rd, rj);
+		break;
+	case 2:
+		emit_insn(ctx, extwh, rd, rj);
+		break;
+	case 4:
+		emit_insn(ctx, addiw, rd, rj, 0);
+		break;
+	case 8:
+		if (rd != rj)
+			move_reg(ctx, rd, rj);
+		break;
+	default:
+		pr_warn("bpf_jit: invalid size %d for sign_extend\n", size);
+	}
+}
+
+static int __arch_prepare_bpf_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
+					 const struct btf_func_model *m, struct bpf_tramp_links *tlinks,
+					 void *func_addr, u32 flags)
+{
+	int i, ret, save_ret;
+	int stack_size, nargs;
+	int retval_off, args_off, nargs_off, ip_off, run_ctx_off, sreg_off, tcc_ptr_off;
+	bool is_struct_ops = flags & BPF_TRAMP_F_INDIRECT;
+	void *orig_call = func_addr;
+	struct bpf_tramp_links *fentry = &tlinks[BPF_TRAMP_FENTRY];
+	struct bpf_tramp_links *fexit = &tlinks[BPF_TRAMP_FEXIT];
+	struct bpf_tramp_links *fmod_ret = &tlinks[BPF_TRAMP_MODIFY_RETURN];
+	u32 **branches = NULL;
+
+	/*
+	 * FP + 8       [ RA to parent func ] return address to parent
+	 *                    function
+	 * FP + 0       [ FP of parent func ] frame pointer of parent
+	 *                    function
+	 * FP - 8       [ T0 to traced func ] return address of traced
+	 *                    function
+	 * FP - 16      [ FP of traced func ] frame pointer of traced
+	 *                    function
+	 *
+	 * FP - retval_off  [ return value      ] BPF_TRAMP_F_CALL_ORIG or
+	 *                    BPF_TRAMP_F_RET_FENTRY_RET
+	 *                  [ argN              ]
+	 *                  [ ...               ]
+	 * FP - args_off    [ arg1              ]
+	 *
+	 * FP - nargs_off   [ regs count        ]
+	 *
+	 * FP - ip_off      [ traced func   ] BPF_TRAMP_F_IP_ARG
+	 *
+	 * FP - run_ctx_off [ bpf_tramp_run_ctx ]
+	 *
+	 * FP - sreg_off    [ callee saved reg  ]
+	 *
+	 * FP - tcc_ptr_off [ tail_call_cnt_ptr ]
+	 */
+
+	if (m->nr_args > LOONGARCH_MAX_REG_ARGS)
+		return -ENOTSUPP;
+
+	/* FIXME: No support of struct argument */
+	for (i = 0; i < m->nr_args; i++) {
+		if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG)
+			return -ENOTSUPP;
+	}
+
+	if (flags & (BPF_TRAMP_F_ORIG_STACK | BPF_TRAMP_F_SHARE_IPMODIFY))
+		return -ENOTSUPP;
+
+	/* Room of trampoline frame to store return address and frame pointer */
+	stack_size = 16;
+
+	save_ret = flags & (BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_RET_FENTRY_RET);
+	if (save_ret)
+		stack_size += 16; /* Save BPF R0 and A0 */
+
+	retval_off = stack_size;
+
+	/* Room of trampoline frame to store args */
+	nargs = m->nr_args;
+	stack_size += nargs * 8;
+	args_off = stack_size;
+
+	/* Room of trampoline frame to store args number */
+	stack_size += 8;
+	nargs_off = stack_size;
+
+	/* Room of trampoline frame to store ip address */
+	if (flags & BPF_TRAMP_F_IP_ARG) {
+		stack_size += 8;
+		ip_off = stack_size;
+	}
+
+	/* Room of trampoline frame to store struct bpf_tramp_run_ctx */
+	stack_size += round_up(sizeof(struct bpf_tramp_run_ctx), 8);
+	run_ctx_off = stack_size;
+
+	stack_size += 8;
+	sreg_off = stack_size;
+
+	/* Room of trampoline frame to store tail_call_cnt_ptr */
+	if (flags & BPF_TRAMP_F_TAIL_CALL_CTX) {
+		stack_size += 8;
+		tcc_ptr_off = stack_size;
+	}
+
+	stack_size = round_up(stack_size, 16);
+
+	if (is_struct_ops) {
+		/*
+		 * For the trampoline called directly, just handle
+		 * the frame of trampoline.
+		 */
+		emit_insn(ctx, addid, LOONGARCH_GPR_SP, LOONGARCH_GPR_SP, -stack_size);
+		emit_insn(ctx, std, LOONGARCH_GPR_RA, LOONGARCH_GPR_SP, stack_size - 8);
+		emit_insn(ctx, std, LOONGARCH_GPR_FP, LOONGARCH_GPR_SP, stack_size - 16);
+		emit_insn(ctx, addid, LOONGARCH_GPR_FP, LOONGARCH_GPR_SP, stack_size);
+	} else {
+		/*
+		 * For the trampoline called from function entry,
+		 * the frame of traced function and the frame of
+		 * trampoline need to be considered.
+		 */
+		/* RA and FP for parent function */
+		emit_insn(ctx, addid, LOONGARCH_GPR_SP, LOONGARCH_GPR_SP, -16);
+		emit_insn(ctx, std, LOONGARCH_GPR_RA, LOONGARCH_GPR_SP, 8);
+		emit_insn(ctx, std, LOONGARCH_GPR_FP, LOONGARCH_GPR_SP, 0);
+		emit_insn(ctx, addid, LOONGARCH_GPR_FP, LOONGARCH_GPR_SP, 16);
+
+		/* RA and FP for traced function */
+		emit_insn(ctx, addid, LOONGARCH_GPR_SP, LOONGARCH_GPR_SP, -stack_size);
+		emit_insn(ctx, std, LOONGARCH_GPR_T0, LOONGARCH_GPR_SP, stack_size - 8);
+		emit_insn(ctx, std, LOONGARCH_GPR_FP, LOONGARCH_GPR_SP, stack_size - 16);
+		emit_insn(ctx, addid, LOONGARCH_GPR_FP, LOONGARCH_GPR_SP, stack_size);
+	}
+
+	if (flags & BPF_TRAMP_F_TAIL_CALL_CTX)
+		emit_insn(ctx, std, REG_TCC, LOONGARCH_GPR_FP, -tcc_ptr_off);
+
+	/* callee saved register S1 to pass start time */
+	emit_insn(ctx, std, LOONGARCH_GPR_S1, LOONGARCH_GPR_FP, -sreg_off);
+
+	/* store ip address of the traced function */
+	if (flags & BPF_TRAMP_F_IP_ARG) {
+		move_imm(ctx, LOONGARCH_GPR_T1, (const s64)func_addr, false);
+		emit_insn(ctx, std, LOONGARCH_GPR_T1, LOONGARCH_GPR_FP, -ip_off);
+	}
+
+	/* store nargs number */
+	move_imm(ctx, LOONGARCH_GPR_T1, nargs, false);
+	emit_insn(ctx, std, LOONGARCH_GPR_T1, LOONGARCH_GPR_FP, -nargs_off);
+
+	store_args(ctx, nargs, args_off);
+
+	/* To traced function */
+	/* Ftrace jump skips 2 NOP instructions */
+	if (is_kernel_text((unsigned long)orig_call))
+		orig_call += LOONGARCH_FENTRY_NBYTES;
+	/* Direct jump skips 5 NOP instructions */
+	else if (is_bpf_text_address((unsigned long)orig_call))
+		orig_call += LOONGARCH_BPF_FENTRY_NBYTES;
+	/* Module tracing not supported - cause kernel lockups */
+	else if (is_module_text_address((unsigned long)orig_call))
+		return -ENOTSUPP;
+
+	if (flags & BPF_TRAMP_F_CALL_ORIG) {
+		move_addr(ctx, LOONGARCH_GPR_A0, (const u64)im);
+		ret = emit_call(ctx, (const u64)__bpf_tramp_enter);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < fentry->nr_links; i++) {
+		ret = invoke_bpf_prog(ctx, fentry->links[i], args_off, retval_off,
+				      run_ctx_off, flags & BPF_TRAMP_F_RET_FENTRY_RET);
+		if (ret)
+			return ret;
+	}
+	if (fmod_ret->nr_links) {
+		branches  = kcalloc(fmod_ret->nr_links, sizeof(u32 *), GFP_KERNEL);
+		if (!branches)
+			return -ENOMEM;
+
+		invoke_bpf_mod_ret(ctx, fmod_ret, args_off, retval_off, run_ctx_off, branches);
+	}
+
+	if (flags & BPF_TRAMP_F_CALL_ORIG) {
+		restore_args(ctx, m->nr_args, args_off);
+
+		if (flags & BPF_TRAMP_F_TAIL_CALL_CTX)
+			emit_insn(ctx, ldd, REG_TCC, LOONGARCH_GPR_FP, -tcc_ptr_off);
+
+		ret = emit_call(ctx, (const u64)orig_call);
+		if (ret)
+			goto out;
+		emit_insn(ctx, std, LOONGARCH_GPR_A0, LOONGARCH_GPR_FP, -retval_off);
+		emit_insn(ctx, std, regmap[BPF_REG_0], LOONGARCH_GPR_FP, -(retval_off - 8));
+		im->ip_after_call = ctx->ro_image + ctx->idx;
+		/* Reserve space for the move_imm + jirl instruction */
+		for (i = 0; i < LOONGARCH_LONG_JUMP_NINSNS; i++)
+			emit_insn(ctx, nop);
+	}
+
+	for (i = 0; ctx->image && i < fmod_ret->nr_links; i++) {
+		int offset = (void *)(&ctx->image[ctx->idx]) - (void *)branches[i];
+		*branches[i] = larch_insn_gen_bne(LOONGARCH_GPR_T1, LOONGARCH_GPR_ZERO, offset);
+	}
+
+	for (i = 0; i < fexit->nr_links; i++) {
+		ret = invoke_bpf_prog(ctx, fexit->links[i], args_off, retval_off, run_ctx_off, false);
+		if (ret)
+			goto out;
+	}
+
+	if (flags & BPF_TRAMP_F_CALL_ORIG) {
+		im->ip_epilogue = ctx->ro_image + ctx->idx;
+		move_addr(ctx, LOONGARCH_GPR_A0, (const u64)im);
+		ret = emit_call(ctx, (const u64)__bpf_tramp_exit);
+		if (ret)
+			goto out;
+	}
+
+	if (flags & BPF_TRAMP_F_RESTORE_REGS)
+		restore_args(ctx, m->nr_args, args_off);
+
+	if (save_ret) {
+		emit_insn(ctx, ldd, regmap[BPF_REG_0], LOONGARCH_GPR_FP, -(retval_off - 8));
+		if (is_struct_ops)
+			sign_extend(ctx, LOONGARCH_GPR_A0, regmap[BPF_REG_0],
+				    m->ret_size, m->ret_flags & BTF_FMODEL_SIGNED_ARG);
+		else
+			emit_insn(ctx, ldd, LOONGARCH_GPR_A0, LOONGARCH_GPR_FP, -retval_off);
+	}
+
+	emit_insn(ctx, ldd, LOONGARCH_GPR_S1, LOONGARCH_GPR_FP, -sreg_off);
+
+	if (flags & BPF_TRAMP_F_TAIL_CALL_CTX)
+		emit_insn(ctx, ldd, REG_TCC, LOONGARCH_GPR_FP, -tcc_ptr_off);
+
+	if (is_struct_ops) {
+		/* trampoline called directly */
+		emit_insn(ctx, ldd, LOONGARCH_GPR_RA, LOONGARCH_GPR_SP, stack_size - 8);
+		emit_insn(ctx, ldd, LOONGARCH_GPR_FP, LOONGARCH_GPR_SP, stack_size - 16);
+		emit_insn(ctx, addid, LOONGARCH_GPR_SP, LOONGARCH_GPR_SP, stack_size);
+
+		emit_insn(ctx, jirl, LOONGARCH_GPR_ZERO, LOONGARCH_GPR_RA, 0);
+	} else {
+		/* trampoline called from function entry */
+		emit_insn(ctx, ldd, LOONGARCH_GPR_T0, LOONGARCH_GPR_SP, stack_size - 8);
+		emit_insn(ctx, ldd, LOONGARCH_GPR_FP, LOONGARCH_GPR_SP, stack_size - 16);
+		emit_insn(ctx, addid, LOONGARCH_GPR_SP, LOONGARCH_GPR_SP, stack_size);
+
+		emit_insn(ctx, ldd, LOONGARCH_GPR_RA, LOONGARCH_GPR_SP, 8);
+		emit_insn(ctx, ldd, LOONGARCH_GPR_FP, LOONGARCH_GPR_SP, 0);
+		emit_insn(ctx, addid, LOONGARCH_GPR_SP, LOONGARCH_GPR_SP, 16);
+
+		if (flags & BPF_TRAMP_F_SKIP_FRAME)
+			/* return to parent function */
+			emit_insn(ctx, jirl, LOONGARCH_GPR_ZERO, LOONGARCH_GPR_RA, 0);
+		else
+			/* return to traced function */
+			emit_insn(ctx, jirl, LOONGARCH_GPR_ZERO, LOONGARCH_GPR_T0, 0);
+	}
+
+	ret = ctx->idx;
+out:
+	kfree(branches);
+
+	return ret;
+}
+
+int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *ro_image,
+				void *ro_image_end, const struct btf_func_model *m,
+				u32 flags, struct bpf_tramp_links *tlinks, void *func_addr)
+{
+	int ret, size;
+	void *image, *tmp;
+	struct jit_ctx ctx;
+
+	size = ro_image_end - ro_image;
+	image = kvmalloc(size, GFP_KERNEL);
+	if (!image)
+		return -ENOMEM;
+
+	ctx.image = (union loongarch_instruction *)image;
+	ctx.ro_image = (union loongarch_instruction *)ro_image;
+	ctx.idx = 0;
+
+	jit_fill_hole(image, (unsigned int)(ro_image_end - ro_image));
+	ret = __arch_prepare_bpf_trampoline(&ctx, im, m, tlinks, func_addr, flags);
+	if (ret < 0)
+		goto out;
+
+	if (validate_code(&ctx) < 0) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	tmp = bpf_arch_text_copy(ro_image, image, size);
+	if (IS_ERR(tmp)) {
+		ret = PTR_ERR(tmp);
+		goto out;
+	}
+
+out:
+	kvfree(image);
+	return ret < 0 ? ret : size;
+}
+
+int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
+			     struct bpf_tramp_links *tlinks, void *func_addr)
+{
+	int ret;
+	struct jit_ctx ctx;
+	struct bpf_tramp_image im;
+
+	ctx.image = NULL;
+	ctx.idx = 0;
+
+	ret = __arch_prepare_bpf_trampoline(&ctx, &im, m, tlinks, func_addr, flags);
+
+	return ret < 0 ? ret : ret * LOONGARCH_INSN_SIZE;
+}
+
 struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 {
 	bool tmp_blinded = false, extra_pass = false;
@@ -1280,7 +1892,7 @@ skip_init_ctx:
 	build_epilogue(&ctx);
 
 	/* 3. Extra pass to validate JITed code */
-	if (validate_code(&ctx)) {
+	if (validate_ctx(&ctx)) {
 		bpf_jit_binary_free(header);
 		prog = orig_prog;
 		goto out_offset;
@@ -1334,7 +1946,6 @@ out:
 	if (tmp_blinded)
 		bpf_jit_prog_release_other(prog, prog == orig_prog ? tmp : orig_prog);
 
-	out_offset = -1;
 
 	return prog;
 
@@ -1346,6 +1957,16 @@ out_free:
 	goto out_offset;
 }
 
+bool bpf_jit_bypass_spec_v1(void)
+{
+	return true;
+}
+
+bool bpf_jit_bypass_spec_v4(void)
+{
+	return true;
+}
+
 /* Indicate the JIT backend supports mixing bpf2bpf and tailcalls. */
 bool bpf_jit_supports_subprog_tailcalls(void)
 {
diff --git a/arch/loongarch/net/bpf_jit.h b/arch/loongarch/net/bpf_jit.h
index 68586338ecf8..5697158fd164 100644
--- a/arch/loongarch/net/bpf_jit.h
+++ b/arch/loongarch/net/bpf_jit.h
@@ -18,6 +18,7 @@ struct jit_ctx {
 	u32 *offset;
 	int num_exentries;
 	union loongarch_instruction *image;
+	union loongarch_instruction *ro_image;
 	u32 stack_size;
 };
 
@@ -27,6 +28,11 @@ struct jit_data {
 	struct jit_ctx ctx;
 };
 
+static inline void emit_nop(union loongarch_instruction *insn)
+{
+	insn->word = INSN_NOP;
+}
+
 #define emit_insn(ctx, func, ...)						\
 do {										\
 	if (ctx->image != NULL) {						\
@@ -303,3 +309,8 @@ static inline int emit_tailcall_jmp(struct jit_ctx *ctx, u8 cond, enum loongarch
 
 	return -EINVAL;
 }
+
+static inline void bpf_flush_icache(void *start, void *end)
+{
+	flush_icache_range((unsigned long)start, (unsigned long)end);
+}
diff --git a/arch/loongarch/pci/acpi.c b/arch/loongarch/pci/acpi.c
index 1da4dc46df43..50c9016641a4 100644
--- a/arch/loongarch/pci/acpi.c
+++ b/arch/loongarch/pci/acpi.c
@@ -194,6 +194,7 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 {
 	struct pci_bus *bus;
 	struct pci_root_info *info;
+	struct pci_host_bridge *host;
 	struct acpi_pci_root_ops *root_ops;
 	int domain = root->segment;
 	int busnum = root->secondary.start;
@@ -237,8 +238,17 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 			return NULL;
 		}
 
-		pci_bus_size_bridges(bus);
-		pci_bus_assign_resources(bus);
+		/* If we must preserve the resource configuration, claim now */
+		host = pci_find_host_bridge(bus);
+		if (host->preserve_config)
+			pci_bus_claim_resources(bus);
+
+		/*
+		 * Assign whatever was left unassigned. If we didn't claim above,
+		 * this will reassign everything.
+		 */
+		pci_assign_unassigned_root_bus_resources(bus);
+
 		list_for_each_entry(child, &bus->children, node)
 			pcie_bus_configure_settings(child);
 	}
diff --git a/arch/loongarch/pci/pci.c b/arch/loongarch/pci/pci.c
index 2726639150bc..d9fc5d520b37 100644
--- a/arch/loongarch/pci/pci.c
+++ b/arch/loongarch/pci/pci.c
@@ -3,7 +3,6 @@
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
 #include <linux/kernel.h>
-#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <linux/types.h>
@@ -51,11 +50,11 @@ static int __init pcibios_init(void)
 	 */
 	lsize = cpu_last_level_cache_line_size();
 
-	BUG_ON(!lsize);
+	if (lsize) {
+		pci_dfl_cache_line_size = lsize >> 2;
 
-	pci_dfl_cache_line_size = lsize >> 2;
-
-	pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize);
+		pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize);
+	}
 
 	return 0;
 }
diff --git a/arch/loongarch/power/hibernate.c b/arch/loongarch/power/hibernate.c
index 1e0590542f98..e7b7346592cb 100644
--- a/arch/loongarch/power/hibernate.c
+++ b/arch/loongarch/power/hibernate.c
@@ -2,6 +2,7 @@
 #include <asm/fpu.h>
 #include <asm/loongson.h>
 #include <asm/sections.h>
+#include <asm/time.h>
 #include <asm/tlbflush.h>
 #include <linux/suspend.h>
 
@@ -14,6 +15,7 @@ struct pt_regs saved_regs;
 
 void save_processor_state(void)
 {
+	save_counter();
 	saved_crmd = csr_read32(LOONGARCH_CSR_CRMD);
 	saved_prmd = csr_read32(LOONGARCH_CSR_PRMD);
 	saved_euen = csr_read32(LOONGARCH_CSR_EUEN);
@@ -26,6 +28,7 @@ void save_processor_state(void)
 
 void restore_processor_state(void)
 {
+	sync_counter();
 	csr_write32(saved_crmd, LOONGARCH_CSR_CRMD);
 	csr_write32(saved_prmd, LOONGARCH_CSR_PRMD);
 	csr_write32(saved_euen, LOONGARCH_CSR_EUEN);
diff --git a/arch/loongarch/power/platform.c b/arch/loongarch/power/platform.c
index 0909729dc2e1..5bbdb9fd76e5 100644
--- a/arch/loongarch/power/platform.c
+++ b/arch/loongarch/power/platform.c
@@ -17,7 +17,7 @@ void enable_gpe_wakeup(void)
 	if (acpi_gbl_reduced_hardware)
 	       return;
 
-	acpi_enable_all_wakeup_gpes();
+	acpi_hw_enable_all_wakeup_gpes();
 }
 
 void enable_pci_wakeup(void)
diff --git a/arch/loongarch/power/suspend_asm.S b/arch/loongarch/power/suspend_asm.S
index 9fe28d5a0270..df0865df26fa 100644
--- a/arch/loongarch/power/suspend_asm.S
+++ b/arch/loongarch/power/suspend_asm.S
@@ -30,9 +30,6 @@
 	st.d		$r29, sp, PT_R29
 	st.d		$r30, sp, PT_R30
 	st.d		$r31, sp, PT_R31
-
-	la.pcrel	t0, acpi_saved_sp
-	st.d		sp, t0, 0
 .endm
 
 .macro SETUP_WAKEUP
@@ -51,6 +48,7 @@
 	ld.d		$r29, sp, PT_R29
 	ld.d		$r30, sp, PT_R30
 	ld.d		$r31, sp, PT_R31
+	addi.d		sp, sp, PT_SIZE
 .endm
 
 	.text
@@ -59,6 +57,10 @@
 /* Sleep/wakeup code for Loongson-3 */
 SYM_FUNC_START(loongarch_suspend_enter)
 	SETUP_SLEEP
+
+	la.pcrel	t0, acpi_saved_sp
+	st.d		sp, t0, 0
+
 	bl		__flush_cache_all
 
 	/* Pass RA and SP to BIOS */
@@ -82,7 +84,7 @@ SYM_INNER_LABEL(loongarch_wakeup_start, SYM_L_GLOBAL)
 
 	la.pcrel	t0, acpi_saved_sp
 	ld.d		sp, t0, 0
+
 	SETUP_WAKEUP
-	addi.d		sp, sp, PT_SIZE
 	jr		ra
 SYM_FUNC_END(loongarch_suspend_enter)
diff --git a/arch/loongarch/vdso/Makefile b/arch/loongarch/vdso/Makefile
index fdde1bcd4e26..c0cc3ca5da9f 100644
--- a/arch/loongarch/vdso/Makefile
+++ b/arch/loongarch/vdso/Makefile
@@ -2,7 +2,7 @@
 # Objects to go into the VDSO.
 
 # Include the generic Makefile to check the built vdso.
-include $(srctree)/lib/vdso/Makefile
+include $(srctree)/lib/vdso/Makefile.include
 
 obj-vdso-y := elf.o vgetcpu.o vgettimeofday.o vgetrandom.o \
               vgetrandom-chacha.o sigreturn.o
@@ -19,7 +19,7 @@ ccflags-vdso := \
 cflags-vdso := $(ccflags-vdso) \
 	-isystem $(shell $(CC) -print-file-name=include) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
-	-std=gnu11 -O2 -g -fno-strict-aliasing -fno-common -fno-builtin \
+	-std=gnu11 -fms-extensions -O2 -g -fno-strict-aliasing -fno-common -fno-builtin \
 	-fno-stack-protector -fno-jump-tables -DDISABLE_BRANCH_PROFILING \
 	$(call cc-option, -fno-asynchronous-unwind-tables) \
 	$(call cc-option, -fno-stack-protector)
@@ -36,8 +36,7 @@ endif
 
 # VDSO linker flags.
 ldflags-y := -Bsymbolic --no-undefined -soname=linux-vdso.so.1 \
-	$(filter -E%,$(KBUILD_CFLAGS)) -nostdlib -shared \
-	--hash-style=sysv --build-id -T
+	$(filter -E%,$(KBUILD_CFLAGS)) -shared --build-id -T
 
 #
 # Shared build commands.
diff --git a/arch/loongarch/vdso/vdso.lds.S b/arch/loongarch/vdso/vdso.lds.S
index 160cfaef2de4..8ff986499947 100644
--- a/arch/loongarch/vdso/vdso.lds.S
+++ b/arch/loongarch/vdso/vdso.lds.S
@@ -5,6 +5,7 @@
  */
 #include <asm/page.h>
 #include <generated/asm-offsets.h>
+#include <vdso/datapage.h>
 
 OUTPUT_FORMAT("elf64-loongarch", "elf64-loongarch", "elf64-loongarch")
 
@@ -12,11 +13,8 @@ OUTPUT_ARCH(loongarch)
 
 SECTIONS
 {
-	PROVIDE(_vdso_data = . - __VVAR_PAGES * PAGE_SIZE);
-#ifdef CONFIG_TIME_NS
-	PROVIDE(_timens_data = _vdso_data + PAGE_SIZE);
-#endif
-	PROVIDE(_loongarch_data = _vdso_data + 2 * PAGE_SIZE);
+	VDSO_VVAR_SYMS
+
 	. = SIZEOF_HEADERS;
 
 	.hash		: { *(.hash) }			:text
diff --git a/arch/loongarch/vdso/vgetcpu.c b/arch/loongarch/vdso/vgetcpu.c
index 0db51258b2a7..5301cd9d0f83 100644
--- a/arch/loongarch/vdso/vgetcpu.c
+++ b/arch/loongarch/vdso/vgetcpu.c
@@ -19,27 +19,19 @@ static __always_inline int read_cpu_id(void)
 	return cpu_id;
 }
 
-static __always_inline const struct vdso_pcpu_data *get_pcpu_data(void)
-{
-	return _loongarch_data.pdata;
-}
-
 extern
 int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused);
 int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused)
 {
 	int cpu_id;
-	const struct vdso_pcpu_data *data;
 
 	cpu_id = read_cpu_id();
 
 	if (cpu)
 		*cpu = cpu_id;
 
-	if (node) {
-		data = get_pcpu_data();
-		*node = data[cpu_id].node;
-	}
+	if (node)
+		*node = vdso_u_arch_data.pdata[cpu_id].node;
 
 	return 0;
 }
diff --git a/arch/loongarch/vdso/vgetrandom-chacha.S b/arch/loongarch/vdso/vgetrandom-chacha.S
index c2733e6c3a8d..c4dd2bab8825 100644
--- a/arch/loongarch/vdso/vgetrandom-chacha.S
+++ b/arch/loongarch/vdso/vgetrandom-chacha.S
@@ -58,9 +58,7 @@ SYM_FUNC_START(__arch_chacha20_blocks_nostack)
 #define copy0		t5
 #define copy1		t6
 #define copy2		t7
-
-/* Reuse i as copy3 */
-#define copy3		i
+#define copy3		t8
 
 /* Packs to be used with OP_4REG */
 #define line0		state0, state1, state2, state3
@@ -99,6 +97,7 @@ SYM_FUNC_START(__arch_chacha20_blocks_nostack)
 	li.w		copy0, 0x61707865
 	li.w		copy1, 0x3320646e
 	li.w		copy2, 0x79622d32
+	li.w		copy3, 0x6b206574
 
 	ld.w		cnt_lo, counter, 0
 	ld.w		cnt_hi, counter, 4
@@ -108,7 +107,7 @@ SYM_FUNC_START(__arch_chacha20_blocks_nostack)
 	move		state0, copy0
 	move		state1, copy1
 	move		state2, copy2
-	li.w		state3, 0x6b206574
+	move		state3, copy3
 
 	/* state[4,5,..,11] = key */
 	ld.w		state4, key, 0
@@ -167,12 +166,6 @@ SYM_FUNC_START(__arch_chacha20_blocks_nostack)
 	addi.w		i, i, -1
 	bnez		i, .Lpermute
 
-	/*
-	 * copy[3] = "expa", materialize it here because copy[3] shares the
-	 * same register with i which just became dead.
-	 */
-	li.w		copy3, 0x6b206574
-
 	/* output[0,1,2,3] = copy[0,1,2,3] + state[0,1,2,3] */
 	OP_4REG	add.w	line0, copy
 	st.w		state0, output, 0
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 7c4f7bcc89d7..11835eb59d94 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -18,17 +18,21 @@ config M68K
 	select DMA_DIRECT_REMAP if M68K_NONCOHERENT_DMA && !COLDFIRE
 	select GENERIC_ATOMIC64
 	select GENERIC_CPU_DEVICES
-	select GENERIC_IOMAP if HAS_IOPORT
+	select GENERIC_IOMAP if HAS_IOPORT && MMU && !COLDFIRE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_LIB_ASHLDI3
 	select GENERIC_LIB_ASHRDI3
 	select GENERIC_LIB_LSHRDI3
+	select GENERIC_LIB_MULDI3
+	select GENERIC_PCI_IOMAP if PCI
 	select HAS_IOPORT if PCI || ISA || ATARI_ROM_ISA
+	select HAVE_ARCH_LIBGCC_H
 	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_HAS_NO_UNALIGNED
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_UID16
 	select MMU_GATHER_NO_RANGE if MMU
diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug
index 30638a6e8edc..d036f903864c 100644
--- a/arch/m68k/Kconfig.debug
+++ b/arch/m68k/Kconfig.debug
@@ -10,7 +10,7 @@ config BOOTPARAM_STRING
 
 config EARLY_PRINTK
 	bool "Early printk"
-	depends on !(SUN3 || M68000 || COLDFIRE)
+	depends on MMU_MOTOROLA
 	help
 	  Write kernel log output directly to a serial port.
 	  Where implemented, output goes to the framebuffer as well.
diff --git a/arch/m68k/amiga/amisound.c b/arch/m68k/amiga/amisound.c
index 714fe8ec6afa..5fd93dfab809 100644
--- a/arch/m68k/amiga/amisound.c
+++ b/arch/m68k/amiga/amisound.c
@@ -78,7 +78,7 @@ void amiga_mksound( unsigned int hz, unsigned int ticks )
 		return;
 
 	local_irq_save(flags);
-	del_timer( &sound_timer );
+	timer_delete(&sound_timer);
 
 	if (hz > 20 && hz < 32767) {
 		unsigned long period = (clock_constant / hz);
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 0147130dc34e..242d18e750b0 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -16,12 +16,10 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/seq_file.h>
-#include <linux/tty.h>
 #include <linux/clocksource.h>
 #include <linux/console.h>
 #include <linux/rtc.h>
 #include <linux/init.h>
-#include <linux/vt_kern.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/zorro.h>
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index e161ecd76035..e324c5f671de 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -3,9 +3,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/rtc.h>
-#include <linux/vt_kern.h>
 #include <linux/interrupt.h>
 
 #include <asm/setup.h>
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index b48a0606a000..ee2d061efb2a 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -33,7 +33,6 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/usb/isp116x.h>
-#include <linux/vt_kern.h>
 #include <linux/module.h>
 
 #include <asm/bootinfo.h>
diff --git a/arch/m68k/atari/nvram.c b/arch/m68k/atari/nvram.c
index 7000d2443aa3..ededc31375c3 100644
--- a/arch/m68k/atari/nvram.c
+++ b/arch/m68k/atari/nvram.c
@@ -16,7 +16,9 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/spinlock.h>
+#include <linux/string_choices.h>
 #include <linux/types.h>
+
 #include <asm/atarihw.h>
 #include <asm/atariints.h>
 
@@ -198,7 +200,7 @@ static void atari_nvram_proc_read(unsigned char *nvram, struct seq_file *seq,
 		seq_printf(seq, "0x%02x (undefined)\n", nvram[1]);
 
 	seq_printf(seq, "SCSI arbitration : %s\n",
-		   (nvram[16] & 0x80) ? "on" : "off");
+		   str_on_off(nvram[16] & 0x80));
 	seq_puts(seq, "SCSI host ID     : ");
 	if (nvram[16] & 0x80)
 		seq_printf(seq, "%d\n", nvram[16] & 7);
@@ -236,7 +238,7 @@ static void atari_nvram_proc_read(unsigned char *nvram, struct seq_file *seq,
 		   vmode & 16 ? "VGA" : "TV", vmode & 32 ? "PAL" : "NTSC");
 	seq_printf(seq,
 		   "                   %soverscan, compat. mode %s%s\n",
-		   vmode & 64 ? "" : "no ", vmode & 128 ? "on" : "off",
+		   vmode & 64 ? "" : "no ", str_on_off(vmode & 128),
 		   vmode & 256 ?
 		   (vmode & 16 ? ", line doubling" : ", half screen") : "");
 }
diff --git a/arch/m68k/coldfire/gpio.c b/arch/m68k/coldfire/gpio.c
index ca26de257871..e2f7af1facb2 100644
--- a/arch/m68k/coldfire/gpio.c
+++ b/arch/m68k/coldfire/gpio.c
@@ -123,10 +123,12 @@ static int mcfgpio_direction_output(struct gpio_chip *chip, unsigned offset,
 	return __mcfgpio_direction_output(offset, value);
 }
 
-static void mcfgpio_set_value(struct gpio_chip *chip, unsigned offset,
-			      int value)
+static int mcfgpio_set_value(struct gpio_chip *chip, unsigned int offset,
+			     int value)
 {
 	__mcfgpio_set_value(offset, value);
+
+	return 0;
 }
 
 static int mcfgpio_request(struct gpio_chip *chip, unsigned offset)
diff --git a/arch/m68k/coldfire/m5272.c b/arch/m68k/coldfire/m5272.c
index 734dab657fe3..28b3ffa25ba0 100644
--- a/arch/m68k/coldfire/m5272.c
+++ b/arch/m68k/coldfire/m5272.c
@@ -16,7 +16,6 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/phy.h>
-#include <linux/phy_fixed.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
@@ -103,23 +102,9 @@ void __init config_BSP(char *commandp, int size)
 
 /***************************************************************************/
 
-/*
- * Some 5272 based boards have the FEC ethernet directly connected to
- * an ethernet switch. In this case we need to use the fixed phy type,
- * and we need to declare it early in boot.
- */
-static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
-	.link	= 1,
-	.speed	= 100,
-	.duplex	= 0,
-};
-
-/***************************************************************************/
-
 static int __init init_BSP(void)
 {
 	m5272_uarts_init();
-	fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
 	clkdev_add_table(m5272_clk_lookup, ARRAY_SIZE(m5272_clk_lookup));
 	return 0;
 }
diff --git a/arch/m68k/coldfire/m5441x.c b/arch/m68k/coldfire/m5441x.c
index 405e9d5c832c..7a25cfc7ac07 100644
--- a/arch/m68k/coldfire/m5441x.c
+++ b/arch/m68k/coldfire/m5441x.c
@@ -33,14 +33,14 @@ DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfuart.3", 27, MCF_BUSCLK);
-DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
-DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
-DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
-DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
-DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
-DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
-DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
-DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfpit.2", 34, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfpit.3", 35, MCF_BUSCLK);
 DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
 DEFINE_CLK(0, "mcfadc.0", 38, MCF_CLK);
 DEFINE_CLK(0, "mcfdac.0", 39, MCF_CLK);
@@ -167,8 +167,8 @@ static struct clk * const disable_clks[] __initconst = {
 	&__clk_0_14, /* i2c.1 */
 	&__clk_0_22, /* i2c.0 */
 	&__clk_0_23, /* dspi.0 */
-	&__clk_0_28, /* tmr.1 */
-	&__clk_0_29, /* tmr.2 */
+	&__clk_0_28, /* tmr.0 */
+	&__clk_0_29, /* tmr.1 */
 	&__clk_0_30, /* tmr.2 */
 	&__clk_0_31, /* tmr.3 */
 	&__clk_0_32, /* pit.0 */
diff --git a/arch/m68k/configs/amcore_defconfig b/arch/m68k/configs/amcore_defconfig
index 67a0d157122d..88832e9cd7cb 100644
--- a/arch/m68k/configs/amcore_defconfig
+++ b/arch/m68k/configs/amcore_defconfig
@@ -2,7 +2,6 @@ CONFIG_LOCALVERSION="amcore-002"
 CONFIG_DEFAULT_HOSTNAME="amcore"
 CONFIG_SYSVIPC=y
 # CONFIG_FHANDLE is not set
-# CONFIG_USELIB is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_AIO is not set
@@ -87,6 +86,4 @@ CONFIG_PANIC_ON_OOPS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_CRYPTO_ECHAINIV is not set
-CONFIG_CRYPTO_ANSI_CPRNG=y
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=y
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index c705247e7b5b..bfc1ee7c8158 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -85,7 +85,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -126,6 +125,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -207,14 +207,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -234,10 +232,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -246,6 +242,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -267,9 +264,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -285,7 +280,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -299,7 +293,6 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_AMIGA=m
@@ -312,7 +305,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -336,6 +328,7 @@ CONFIG_ATA=y
 CONFIG_PATA_GAYLE=y
 CONFIG_PATA_BUDDHA=y
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -358,6 +351,7 @@ CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -377,6 +371,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_A2065=y
 CONFIG_ARIADNE=y
@@ -450,9 +445,10 @@ CONFIG_RTC_DRV_RP5C01=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -486,7 +482,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -551,14 +546,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -579,17 +574,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -597,7 +590,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -606,7 +598,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -625,8 +617,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -636,7 +626,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 6d62b9187a58..d9d1f3c4c70d 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -81,7 +81,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -122,6 +121,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -203,14 +203,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -230,10 +228,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -242,6 +238,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -263,9 +260,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -281,7 +276,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -295,14 +289,12 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_ZRAM=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -316,6 +308,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -338,6 +331,7 @@ CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -357,6 +351,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@@ -407,9 +402,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -443,7 +439,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -508,14 +503,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -536,17 +531,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -554,7 +547,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -563,7 +555,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -582,8 +574,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -593,7 +583,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index c3c644df852d..523205adccc8 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -88,7 +88,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -129,6 +128,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -210,14 +210,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -237,10 +235,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -249,6 +245,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -270,9 +267,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -288,7 +283,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -302,7 +296,6 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_ATARI=m
@@ -313,7 +306,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -331,6 +323,7 @@ CONFIG_ATA=y
 # CONFIG_ATA_BMDMA is not set
 CONFIG_PATA_FALCON=y
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -353,6 +346,7 @@ CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -372,6 +366,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_ATARILANCE=y
 CONFIG_NE2000=y
@@ -427,9 +422,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -463,7 +459,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -528,14 +523,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -556,17 +551,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -574,7 +567,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -583,7 +575,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -602,8 +594,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -613,7 +603,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 20261f819691..7b0a4ef0b010 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -78,7 +78,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -119,6 +118,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -200,14 +200,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -227,10 +225,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -239,6 +235,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -260,9 +257,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -278,7 +273,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -292,14 +286,12 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_ZRAM=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -314,6 +306,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_BVME6000_SCSI=y
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -336,6 +329,7 @@ CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -355,6 +349,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_BVME6000_NET=y
 CONFIG_PPP=m
@@ -399,9 +394,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -435,7 +431,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -500,14 +495,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -528,17 +523,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -546,7 +539,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -555,7 +547,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -574,8 +566,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -585,7 +575,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index ce4fe93a0f70..089c5c394c62 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -80,7 +80,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -121,6 +120,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -202,14 +202,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -229,10 +227,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -241,6 +237,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -262,9 +259,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -280,7 +275,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -294,14 +288,12 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_ZRAM=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -315,6 +307,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -337,6 +330,7 @@ CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -356,6 +350,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_HPLANCE=y
 CONFIG_PPP=m
@@ -409,9 +404,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -445,7 +441,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -510,14 +505,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -538,17 +533,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -556,7 +549,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -565,7 +557,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -584,8 +576,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -595,7 +585,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 040ae75f47c3..5f2484c36733 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -79,7 +79,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -120,6 +119,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -201,14 +201,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -228,10 +226,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -240,6 +236,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -261,9 +258,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -279,7 +274,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -293,7 +287,6 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_BLK_DEV_SWIM=m
 CONFIG_ZRAM=m
@@ -301,7 +294,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -320,6 +312,7 @@ CONFIG_ATA=y
 # CONFIG_ATA_BMDMA is not set
 CONFIG_PATA_PLATFORM=y
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -349,6 +342,7 @@ CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -368,6 +362,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_MACMACE=y
 CONFIG_MAC89x0=y
@@ -426,9 +421,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -462,7 +458,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -527,14 +522,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -555,17 +550,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -573,7 +566,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -582,7 +574,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -601,8 +593,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -612,7 +602,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 20d877cb4e30..74f0a1f6d871 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -99,7 +99,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -140,6 +139,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -221,14 +221,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -248,10 +246,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -260,6 +256,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -281,9 +278,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -299,7 +294,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -313,7 +307,6 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
@@ -330,7 +323,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -363,6 +355,7 @@ CONFIG_PATA_GAYLE=y
 CONFIG_PATA_BUDDHA=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -392,6 +385,7 @@ CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -411,6 +405,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_A2065=y
 CONFIG_ARIADNE=y
@@ -513,9 +508,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -549,7 +545,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -614,14 +609,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -642,17 +637,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -660,7 +653,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -669,7 +661,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -688,8 +680,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -699,7 +689,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index 5e1c8d0d3da5..4bee18c820e4 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -77,7 +77,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -118,6 +117,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -199,14 +199,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -226,10 +224,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -238,6 +234,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -259,9 +256,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -277,7 +272,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -291,14 +285,12 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_ZRAM=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -313,6 +305,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_MVME147_SCSI=y
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -335,6 +328,7 @@ CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -354,6 +348,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_MVME147_NET=y
 CONFIG_PPP=m
@@ -399,9 +394,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -435,7 +431,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -500,14 +495,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -528,17 +523,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -546,7 +539,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -555,7 +547,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -574,8 +566,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -585,7 +575,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 5d1409e6a137..322c17e55c9a 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -78,7 +78,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -119,6 +118,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -200,14 +200,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -227,10 +225,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -239,6 +235,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -260,9 +257,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -278,7 +273,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -292,14 +286,12 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_ZRAM=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -314,6 +306,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_MVME16x_SCSI=y
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -336,6 +329,7 @@ CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -355,6 +349,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_MVME16x_NET=y
 CONFIG_PPP=m
@@ -400,9 +395,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -436,7 +432,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -501,14 +496,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -529,17 +524,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -547,7 +540,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -556,7 +548,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -575,8 +567,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -586,7 +576,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index e4c30e2b9bbb..82f9baab8fea 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -79,7 +79,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -120,6 +119,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -201,14 +201,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -228,10 +226,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -240,6 +236,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -261,9 +258,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -279,7 +274,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -293,7 +287,6 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
@@ -303,7 +296,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -320,6 +312,7 @@ CONFIG_ATA=y
 # CONFIG_ATA_BMDMA is not set
 CONFIG_PATA_FALCON=y
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -342,6 +335,7 @@ CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -361,6 +355,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_NE2000=y
 CONFIG_PLIP=m
@@ -416,9 +411,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -452,7 +448,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -517,14 +512,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -545,17 +540,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -563,7 +556,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -572,7 +564,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -591,8 +583,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -602,7 +592,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/stmark2_defconfig b/arch/m68k/configs/stmark2_defconfig
index 7787a4dd7c3c..f9ecb1dcc060 100644
--- a/arch/m68k/configs/stmark2_defconfig
+++ b/arch/m68k/configs/stmark2_defconfig
@@ -72,9 +72,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
@@ -84,7 +84,6 @@ CONFIG_FSCACHE=y
 CONFIG_CRAMFS=y
 CONFIG_SQUASHFS=y
 CONFIG_ROMFS_FS=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRINTK_TIME=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 980843a9ea1e..f94ad226cb5b 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -74,7 +74,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -115,6 +114,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -196,14 +196,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -223,10 +221,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -235,6 +231,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -256,9 +253,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -274,7 +269,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -288,14 +282,12 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_ZRAM=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -310,6 +302,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_SUN3_SCSI=y
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -332,6 +325,7 @@ CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -351,6 +345,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_SUN3LANCE=y
 CONFIG_SUN3_82586=y
@@ -397,9 +392,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -433,7 +429,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -498,14 +493,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -526,17 +521,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -544,7 +537,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -553,7 +545,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -571,8 +563,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -582,7 +572,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 38681cc6b598..a5ecfc505ab2 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -75,7 +75,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_HOOK=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_ZONES=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -116,6 +115,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -197,14 +197,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -224,10 +222,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -236,6 +232,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -257,9 +254,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_SCTP_COOKIE_HMAC_SHA1=y
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_L2TP=m
@@ -275,7 +270,6 @@ CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 # CONFIG_BATMAN_ADV_BATMAN_V is not set
-CONFIG_BATMAN_ADV_NC=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
@@ -289,14 +283,12 @@ CONFIG_NET_IFE=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEST_ASYNC_DRIVER_PROBE=m
-CONFIG_DM_KUNIT_TEST=m
 CONFIG_CONNECTOR=m
 CONFIG_ZRAM=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -311,6 +303,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_SUN3X_ESP=y
 CONFIG_MD=y
+CONFIG_MD_LINEAR=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_UNSTRIPED=m
 CONFIG_DM_CRYPT=m
@@ -333,6 +326,7 @@ CONFIG_TCM_PSCSI=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_WIREGUARD=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_NET_TEAM=m
 CONFIG_NET_TEAM_MODE_BROADCAST=m
@@ -352,6 +346,7 @@ CONFIG_PFCP=m
 CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_SUN3LANCE=y
 CONFIG_PPP=m
@@ -397,9 +392,10 @@ CONFIG_RTC_DRV_GENERIC=m
 CONFIG_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
+CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-CONFIG_BCACHEFS_FS=m
+CONFIG_BTRFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -433,7 +429,6 @@ CONFIG_OMFS_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_QNX6FS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_EROFS_FS=m
 CONFIG_NFS_FS=y
@@ -498,14 +493,14 @@ CONFIG_DLM=m
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -526,17 +521,15 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_HCTR2=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SM3_GENERIC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
@@ -544,7 +537,6 @@ CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ZSTD=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -553,7 +545,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
-CONFIG_CRC32_SELFTEST=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -572,8 +564,6 @@ CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_KSTRTOX=m
-CONFIG_TEST_PRINTF=m
-CONFIG_TEST_SCANF=m
 CONFIG_TEST_BITMAP=m
 CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
@@ -583,7 +573,6 @@ CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_BPF=m
-CONFIG_TEST_BLACKHOLE_DEV=m
 CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
diff --git a/arch/m68k/emu/nfblock.c b/arch/m68k/emu/nfblock.c
index 83410f8184ec..94a4fadc651a 100644
--- a/arch/m68k/emu/nfblock.c
+++ b/arch/m68k/emu/nfblock.c
@@ -77,9 +77,9 @@ static void nfhd_submit_bio(struct bio *bio)
 	bio_endio(bio);
 }
 
-static int nfhd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+static int nfhd_getgeo(struct gendisk *disk, struct hd_geometry *geo)
 {
-	struct nfhd_device *dev = bdev->bd_disk->private_data;
+	struct nfhd_device *dev = disk->private_data;
 
 	geo->cylinders = dev->blocks >> (6 - dev->bshift);
 	geo->heads = 4;
diff --git a/arch/m68k/include/asm/adb_iop.h b/arch/m68k/include/asm/adb_iop.h
index 6aecd020e2fc..ca10b1ec0c78 100644
--- a/arch/m68k/include/asm/adb_iop.h
+++ b/arch/m68k/include/asm/adb_iop.h
@@ -33,7 +33,7 @@
 #define ADB_IOP_SRQ		0x04	/* SRQ detected                */
 #define ADB_IOP_TIMEOUT		0x02	/* nonzero if timeout          */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct adb_iopmsg {
 	__u8 flags;		/* ADB flags         */
@@ -43,4 +43,4 @@ struct adb_iopmsg {
 	__u8 spare[21];		/* spare             */
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
diff --git a/arch/m68k/include/asm/bitops.h b/arch/m68k/include/asm/bitops.h
index 14c64a6f1217..e9639e48c6c3 100644
--- a/arch/m68k/include/asm/bitops.h
+++ b/arch/m68k/include/asm/bitops.h
@@ -350,12 +350,12 @@ static inline bool xor_unlock_is_negative_byte(unsigned long mask,
 #include <asm-generic/bitops/ffz.h>
 #else
 
-static inline int find_first_zero_bit(const unsigned long *vaddr,
-				      unsigned size)
+static inline unsigned long find_first_zero_bit(const unsigned long *vaddr,
+						unsigned long size)
 {
 	const unsigned long *p = vaddr;
-	int res = 32;
-	unsigned int words;
+	unsigned long res = 32;
+	unsigned long words;
 	unsigned long num;
 
 	if (!size)
@@ -376,8 +376,9 @@ out:
 }
 #define find_first_zero_bit find_first_zero_bit
 
-static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
-				     int offset)
+static inline unsigned long find_next_zero_bit(const unsigned long *vaddr,
+					       unsigned long size,
+					       unsigned long offset)
 {
 	const unsigned long *p = vaddr + (offset >> 5);
 	int bit = offset & 31UL, res;
@@ -406,11 +407,12 @@ static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
 }
 #define find_next_zero_bit find_next_zero_bit
 
-static inline int find_first_bit(const unsigned long *vaddr, unsigned size)
+static inline unsigned long find_first_bit(const unsigned long *vaddr,
+					   unsigned long size)
 {
 	const unsigned long *p = vaddr;
-	int res = 32;
-	unsigned int words;
+	unsigned long res = 32;
+	unsigned long words;
 	unsigned long num;
 
 	if (!size)
@@ -431,8 +433,9 @@ out:
 }
 #define find_first_bit find_first_bit
 
-static inline int find_next_bit(const unsigned long *vaddr, int size,
-				int offset)
+static inline unsigned long find_next_bit(const unsigned long *vaddr,
+					  unsigned long size,
+					  unsigned long offset)
 {
 	const unsigned long *p = vaddr + (offset >> 5);
 	int bit = offset & 31UL, res;
@@ -465,7 +468,7 @@ static inline int find_next_bit(const unsigned long *vaddr, int size,
  * ffz = Find First Zero in word. Undefined if no zero exists,
  * so code should check against ~0UL first..
  */
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __attribute_const__ ffz(unsigned long word)
 {
 	int res;
 
@@ -488,7 +491,7 @@ static inline unsigned long ffz(unsigned long word)
  */
 #if (defined(__mcfisaaplus__) || defined(__mcfisac__)) && \
 	!defined(CONFIG_M68000)
-static inline unsigned long __ffs(unsigned long x)
+static inline __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	__asm__ __volatile__ ("bitrev %0; ff1 %0"
 		: "=d" (x)
@@ -496,7 +499,7 @@ static inline unsigned long __ffs(unsigned long x)
 	return x;
 }
 
-static inline int ffs(int x)
+static inline __attribute_const__ int ffs(int x)
 {
 	if (!x)
 		return 0;
@@ -518,7 +521,7 @@ static inline int ffs(int x)
  *	the libc and compiler builtin ffs routines, therefore
  *	differs in spirit from the above ffz (man ffs).
  */
-static inline int ffs(int x)
+static inline __attribute_const__ int ffs(int x)
 {
 	int cnt;
 
@@ -528,7 +531,7 @@ static inline int ffs(int x)
 	return 32 - cnt;
 }
 
-static inline unsigned long __ffs(unsigned long x)
+static inline __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	return ffs(x) - 1;
 }
@@ -536,7 +539,7 @@ static inline unsigned long __ffs(unsigned long x)
 /*
  *	fls: find last bit set.
  */
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	int cnt;
 
@@ -546,7 +549,7 @@ static inline int fls(unsigned int x)
 	return 32 - cnt;
 }
 
-static inline unsigned long __fls(unsigned long x)
+static inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	return fls(x) - 1;
 }
diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h
index 81c91af8ec6c..267272b436e2 100644
--- a/arch/m68k/include/asm/bootinfo.h
+++ b/arch/m68k/include/asm/bootinfo.h
@@ -14,7 +14,7 @@
 #include <uapi/asm/bootinfo.h>
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_BOOTINFO_PROC
 extern void save_bootinfo(const struct bi_record *bi);
@@ -28,7 +28,7 @@ void process_uboot_commandline(char *commandp, int size);
 static inline void process_uboot_commandline(char *commandp, int size) {}
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 
 #endif /* _M68K_BOOTINFO_H */
diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h
index 9b52b060c76a..86cba7c19e67 100644
--- a/arch/m68k/include/asm/entry.h
+++ b/arch/m68k/include/asm/entry.h
@@ -4,7 +4,7 @@
 
 #include <asm/setup.h>
 #include <asm/page.h>
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #include <asm/thread_info.h>
 #endif
 
@@ -41,7 +41,7 @@
 #define ALLOWINT	(~0x700)
 #endif /* machine compilation types */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 /*
  * This defines the normal kernel pt-regs layout.
  *
diff --git a/arch/m68k/include/asm/floppy.h b/arch/m68k/include/asm/floppy.h
index a4d0fea47c6b..dea98bbc0932 100644
--- a/arch/m68k/include/asm/floppy.h
+++ b/arch/m68k/include/asm/floppy.h
@@ -107,13 +107,9 @@ static void fd_free_irq(void)
 
 #define fd_free_dma()             /* nothing */
 
-/* No 64k boundary crossing problems on Q40 - no DMA at all */
-#define CROSS_64KB(a,s) (0)
-
 #define DMA_MODE_READ  0x44    /* i386 look-alike */
 #define DMA_MODE_WRITE 0x48
 
-
 static int m68k_floppy_init(void)
 {
   use_virtual_dma =1;
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 2c96e8480173..516371d5587a 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -123,10 +123,6 @@ static inline void writel(u32 value, volatile void __iomem *addr)
 #define PCI_IO_SIZE	0x00010000		/* 64k */
 #define PCI_IO_MASK	(PCI_IO_SIZE - 1)
 
-#define HAVE_ARCH_PIO_SIZE
-#define PIO_OFFSET	0
-#define PIO_MASK	0xffff
-#define PIO_RESERVED	0x10000
 #define PCI_IOBASE	((void __iomem *) PCI_IO_PA)
 #define PCI_SPACE_LIMIT	PCI_IO_MASK
 #endif /* CONFIG_PCI */
diff --git a/arch/m68k/include/asm/kexec.h b/arch/m68k/include/asm/kexec.h
index 3b0b64f0a353..f79427bd6487 100644
--- a/arch/m68k/include/asm/kexec.h
+++ b/arch/m68k/include/asm/kexec.h
@@ -15,7 +15,7 @@
 
 #define KEXEC_ARCH KEXEC_ARCH_68K
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline void crash_setup_regs(struct pt_regs *newregs,
 				    struct pt_regs *oldregs)
@@ -23,7 +23,7 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 	/* Dummy implementation for now */
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* CONFIG_KEXEC_CORE */
 
diff --git a/arch/m68k/include/asm/libgcc.h b/arch/m68k/include/asm/libgcc.h
new file mode 100644
index 000000000000..27e17195bd7b
--- /dev/null
+++ b/arch/m68k/include/asm/libgcc.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_M68K_LIBGCC_H
+#define __ASM_M68K_LIBGCC_H
+
+#ifndef CONFIG_CPU_HAS_NO_MULDIV64
+/*
+ * For those 68K CPUs that support 64bit multiply define umul_ppm()
+ * for the common muldi3 libgcc helper function (in lib/muldi3.c).
+ * CPUs that don't have it (like the original 68000 and ColdFire)
+ * will fallback to using the C-coded version of umul_ppmm().
+ */
+#define umul_ppmm(w1, w0, u, v)				\
+	do {						\
+		unsigned long __u = (u), __v = (v);	\
+		unsigned long __w0, __w1;		\
+							\
+		__asm__ ("mulu%.l %3,%1:%0"		\
+			 : "=d" (__w0),			\
+			   "=d" (__w1)			\
+			 : "%0" (__u),			\
+			   "dmi" (__v));		\
+							\
+		(w0) = __w0; (w1) = __w1;		\
+	} while (0)
+#endif /* !CONFIG_CPU_HAS_NO_MULDIV64 */
+
+#endif /* __ASM_M68K_LIBGCC_H */
diff --git a/arch/m68k/include/asm/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h
index 08d9b8829a1a..ed5b5b48bdf8 100644
--- a/arch/m68k/include/asm/mac_baboon.h
+++ b/arch/m68k/include/asm/mac_baboon.h
@@ -5,7 +5,7 @@
 
 #define BABOON_BASE (0x50F1A000)	/* same as IDE controller base */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct baboon {
 	char	pad1[208];	/* generic IDE registers, not used here */
@@ -36,4 +36,4 @@ extern void baboon_register_interrupts(void);
 extern void baboon_irq_enable(int);
 extern void baboon_irq_disable(int);
 
-#endif /* __ASSEMBLY **/
+#endif /* __ASSEMBLER__ */
diff --git a/arch/m68k/include/asm/mac_iop.h b/arch/m68k/include/asm/mac_iop.h
index 32f1c79c818f..a6753eb16ba4 100644
--- a/arch/m68k/include/asm/mac_iop.h
+++ b/arch/m68k/include/asm/mac_iop.h
@@ -66,7 +66,7 @@
 #define IOP_ADDR_ALIVE		0x031F
 #define IOP_ADDR_RECV_MSG	0x0320
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * IOP Control registers, staggered because in usual Apple style they were
@@ -163,4 +163,4 @@ extern void iop_ism_irq_poll(uint);
 
 extern void iop_register_interrupts(void);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
diff --git a/arch/m68k/include/asm/mac_oss.h b/arch/m68k/include/asm/mac_oss.h
index 56ef986c0a9b..a6e86e443155 100644
--- a/arch/m68k/include/asm/mac_oss.h
+++ b/arch/m68k/include/asm/mac_oss.h
@@ -59,7 +59,7 @@
 
 #define OSS_POWEROFF	0x80
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct mac_oss {
     __u8  irq_level[0x10];	/* [0x000-0x00f] Interrupt levels */
@@ -77,4 +77,4 @@ extern void oss_register_interrupts(void);
 extern void oss_irq_enable(int);
 extern void oss_irq_disable(int);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
diff --git a/arch/m68k/include/asm/mac_psc.h b/arch/m68k/include/asm/mac_psc.h
index 86a5a5eab89e..6587dbd54476 100644
--- a/arch/m68k/include/asm/mac_psc.h
+++ b/arch/m68k/include/asm/mac_psc.h
@@ -207,7 +207,7 @@
 				 * Unknown, always 0x0000.
 				 */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern volatile __u8 *psc;
 
@@ -249,4 +249,4 @@ static inline u32 psc_read_long(int offset)
 	return *((volatile __u32 *)(psc + offset));
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h
index a9ef1e9ba6c4..b065cd8e5071 100644
--- a/arch/m68k/include/asm/mac_via.h
+++ b/arch/m68k/include/asm/mac_via.h
@@ -250,7 +250,7 @@
 #define IER_SET_BIT(b) (0x80 | (1<<(b)) )
 #define IER_CLR_BIT(b) (0x7F & (1<<(b)) )
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern volatile __u8 *via1,*via2;
 extern int rbv_present,via_alt_mapping;
@@ -267,6 +267,6 @@ extern void via1_irq(struct irq_desc *desc);
 extern void via1_set_head(int);
 extern int via2_scsi_drq_pending(void);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_MAC_VIA_H_ */
diff --git a/arch/m68k/include/asm/math-emu.h b/arch/m68k/include/asm/math-emu.h
index eefaa3a2b596..91074ade14ad 100644
--- a/arch/m68k/include/asm/math-emu.h
+++ b/arch/m68k/include/asm/math-emu.h
@@ -67,7 +67,7 @@
 #define PMUNIMPL	(1<<PUNIMPL)
 #define PMMOVEM		(1<<PMOVEM)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -127,7 +127,7 @@ extern unsigned int fp_debugprint;
 
 #define FPDATA		((struct fp_data *)current->thread.fp)
 
-#else	/* __ASSEMBLY__ */
+#else	/* __ASSEMBLER__ */
 
 #define FPDATA		%a2
 
@@ -311,6 +311,6 @@ old_gas=old_gas+1
 .endm
 
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* _ASM_M68K_SETUP_H */
diff --git a/arch/m68k/include/asm/mcf_pgalloc.h b/arch/m68k/include/asm/mcf_pgalloc.h
index 302c5bf67179..fc5454d37da3 100644
--- a/arch/m68k/include/asm/mcf_pgalloc.h
+++ b/arch/m68k/include/asm/mcf_pgalloc.h
@@ -7,7 +7,7 @@
 
 static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
 {
-	pagetable_free(virt_to_ptdesc(pte));
+	pagetable_dtor_free(virt_to_ptdesc(pte));
 }
 
 extern const char bad_pmd_string[];
@@ -19,6 +19,10 @@ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
 
 	if (!ptdesc)
 		return NULL;
+	if (!pagetable_pte_ctor(mm, ptdesc)) {
+		pagetable_free(ptdesc);
+		return NULL;
+	}
 
 	return ptdesc_address(ptdesc);
 }
@@ -37,7 +41,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pgtable,
 {
 	struct ptdesc *ptdesc = virt_to_ptdesc(pgtable);
 
-	pagetable_pte_dtor(ptdesc);
+	pagetable_dtor(ptdesc);
 	pagetable_free(ptdesc);
 }
 
@@ -48,7 +52,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm)
 
 	if (!ptdesc)
 		return NULL;
-	if (!pagetable_pte_ctor(ptdesc)) {
+	if (!pagetable_pte_ctor(mm, ptdesc)) {
 		pagetable_free(ptdesc);
 		return NULL;
 	}
@@ -61,7 +65,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pgtable)
 {
 	struct ptdesc *ptdesc = virt_to_ptdesc(pgtable);
 
-	pagetable_pte_dtor(ptdesc);
+	pagetable_dtor(ptdesc);
 	pagetable_free(ptdesc);
 }
 
@@ -73,7 +77,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pgtable)
 
 static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
-	pagetable_free(virt_to_ptdesc(pgd));
+	pagetable_dtor_free(virt_to_ptdesc(pgd));
 }
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
@@ -84,6 +88,7 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 
 	if (!ptdesc)
 		return NULL;
+	pagetable_pgd_ctor(ptdesc);
 	new_pgd = ptdesc_address(ptdesc);
 
 	memcpy(new_pgd, swapper_pg_dir, PTRS_PER_PGD * sizeof(pgd_t));
diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
index 48f87a8a8832..189bb7b1e663 100644
--- a/arch/m68k/include/asm/mcf_pgtable.h
+++ b/arch/m68k/include/asm/mcf_pgtable.h
@@ -92,16 +92,10 @@
 #define PTE_MASK	PAGE_MASK
 #define CF_PAGE_CHG_MASK (PTE_MASK | CF_PAGE_ACCESSED | CF_PAGE_DIRTY)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define pmd_pgtable(pmd) pfn_to_virt(pmd_val(pmd) >> PAGE_SHIFT)
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pte_val(pte) = (pte_val(pte) & CF_PAGE_CHG_MASK) | pgprot_val(newprot);
@@ -274,7 +268,7 @@ extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	(__pte((x).val))
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -298,5 +292,5 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 #define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 #endif	/* _MCF_PGTABLE_H */
diff --git a/arch/m68k/include/asm/mcfmmu.h b/arch/m68k/include/asm/mcfmmu.h
index 283352ab0d5d..db16ea1057f7 100644
--- a/arch/m68k/include/asm/mcfmmu.h
+++ b/arch/m68k/include/asm/mcfmmu.h
@@ -88,7 +88,7 @@
 #define	MMUDR_PAN	10			/* Physical address */
 #define	MMUDR_PAMASK	0xfffffc00		/* PA mask */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  *	Simple access functions for the MMU registers. Nothing fancy
diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
index 74a817d9387f..1091fb0affbe 100644
--- a/arch/m68k/include/asm/motorola_pgalloc.h
+++ b/arch/m68k/include/asm/motorola_pgalloc.h
@@ -9,13 +9,13 @@ extern void mmu_page_ctor(void *page);
 extern void mmu_page_dtor(void *page);
 
 enum m68k_table_types {
-	TABLE_PGD = 0,
-	TABLE_PMD = 0, /* same size as PGD */
-	TABLE_PTE = 1,
+	TABLE_PGD,
+	TABLE_PMD,
+	TABLE_PTE,
 };
 
 extern void init_pointer_table(void *table, int type);
-extern void *get_pointer_table(int type);
+extern void *get_pointer_table(struct mm_struct *mm, int type);
 extern int free_pointer_table(void *table, int type);
 
 /*
@@ -26,7 +26,7 @@ extern int free_pointer_table(void *table, int type);
 
 static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
 {
-	return get_pointer_table(TABLE_PTE);
+	return get_pointer_table(mm, TABLE_PTE);
 }
 
 static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
@@ -36,7 +36,7 @@ static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
 
 static inline pgtable_t pte_alloc_one(struct mm_struct *mm)
 {
-	return get_pointer_table(TABLE_PTE);
+	return get_pointer_table(mm, TABLE_PTE);
 }
 
 static inline void pte_free(struct mm_struct *mm, pgtable_t pgtable)
@@ -53,7 +53,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pgtable,
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 {
-	return get_pointer_table(TABLE_PMD);
+	return get_pointer_table(mm, TABLE_PMD);
 }
 
 static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd)
@@ -75,7 +75,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	return get_pointer_table(TABLE_PGD);
+	return get_pointer_table(mm, TABLE_PGD);
 }
 
 
diff --git a/arch/m68k/include/asm/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h
index 9866c7acdabe..dcf6829b3eab 100644
--- a/arch/m68k/include/asm/motorola_pgtable.h
+++ b/arch/m68k/include/asm/motorola_pgtable.h
@@ -44,7 +44,7 @@
 /* We borrow bit 11 to store the exclusive marker in swap PTEs. */
 #define _PAGE_SWP_EXCLUSIVE	0x800
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* This is the cache mode to be used for pages containing page descriptors for
  * processors >= '040. It is in pte_mknocache(), and the variable is defined
@@ -81,12 +81,6 @@ extern unsigned long mm_cachebits;
 
 #define pmd_pgtable(pmd) ((pgtable_t)pmd_page_vaddr(pmd))
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
@@ -191,7 +185,7 @@ extern pgd_t kernel_pg_dir[128];
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -208,5 +202,5 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 	return pte;
 }
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 #endif /* _MOTOROLA_PGTABLE_H */
diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h
index 3bd4b7a4613f..9bf55cef119e 100644
--- a/arch/m68k/include/asm/nettel.h
+++ b/arch/m68k/include/asm/nettel.h
@@ -38,7 +38,7 @@
 
 #define	NETtel_LEDADDR	0x30400000
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern volatile unsigned short ppdata;
 
@@ -80,7 +80,7 @@ static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
 #define	MCFPP_DTR0	0x0040
 #define	MCFPP_DTR1	0x0000		/* Port 1 no DTR support */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  *	These functions defined to give quasi generic access to the
  *	PPIO bits used for DTR/DCD.
diff --git a/arch/m68k/include/asm/openprom.h b/arch/m68k/include/asm/openprom.h
index dd22e649f5c5..6456ba40a946 100644
--- a/arch/m68k/include/asm/openprom.h
+++ b/arch/m68k/include/asm/openprom.h
@@ -21,7 +21,7 @@
 #define	LINUX_OPPROM_MAGIC      0x10010407
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /* V0 prom device operations. */
 struct linux_dev_v0_funcs {
 	int (*v0_devopen)(char *device_str);
@@ -308,6 +308,6 @@ struct linux_prom_ranges {
 	unsigned int or_size;
 };
 
-#endif /* !(__ASSEMBLY__) */
+#endif /* !(__ASSEMBLER__) */
 
 #endif /* !(__SPARC_OPENPROM_H) */
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
index b173ba27d36f..d30f8b2f1592 100644
--- a/arch/m68k/include/asm/page.h
+++ b/arch/m68k/include/asm/page.h
@@ -10,7 +10,7 @@
 
 #define PAGE_OFFSET	(PAGE_OFFSET_RAW)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * These are used to make use of C type-checking..
@@ -48,7 +48,7 @@ extern unsigned long _rambase;
 extern unsigned long _ramstart;
 extern unsigned long _ramend;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #ifdef CONFIG_MMU
 #include <asm/page_mm.h>
diff --git a/arch/m68k/include/asm/page_mm.h b/arch/m68k/include/asm/page_mm.h
index e0ae4d5fc985..ed782609ca41 100644
--- a/arch/m68k/include/asm/page_mm.h
+++ b/arch/m68k/include/asm/page_mm.h
@@ -2,7 +2,7 @@
 #ifndef _M68K_PAGE_MM_H
 #define _M68K_PAGE_MM_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/compiler.h>
 #include <asm/module.h>
@@ -144,6 +144,6 @@ extern int m68k_virt_to_node_shift;
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 #define pfn_valid(pfn)		virt_addr_valid(pfn_to_virt(pfn))
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _M68K_PAGE_MM_H */
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index 63c0e706084b..39db2026a4b4 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -2,7 +2,7 @@
 #ifndef _M68K_PAGE_NO_H
 #define _M68K_PAGE_NO_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
  
 extern unsigned long memory_start;
 extern unsigned long memory_end;
@@ -37,6 +37,6 @@ static inline void *pfn_to_virt(unsigned long pfn)
 
 #define ARCH_PFN_OFFSET PHYS_PFN(PAGE_OFFSET_RAW)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _M68K_PAGE_NO_H */
diff --git a/arch/m68k/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable.h
index 49fcfd734860..02f1a4601379 100644
--- a/arch/m68k/include/asm/pgtable.h
+++ b/arch/m68k/include/asm/pgtable.h
@@ -10,7 +10,7 @@
 #include <asm/pgtable_mm.h>
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern void paging_init(void);
 #endif
 
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index dbdf1c2b2f66..bba64a9c49ac 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -11,7 +11,7 @@
 
 #include <asm/setup.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/processor.h>
 #include <linux/sched.h>
 #include <linux/threads.h>
@@ -119,16 +119,6 @@ extern void *empty_zero_page;
  */
 #define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
 
-/* number of bits that fit into a memory pointer */
-#define BITS_PER_PTR			(8*sizeof(unsigned long))
-
-/* to align the pointer to a pointer address */
-#define PTR_MASK			(~(sizeof(void*)-1))
-
-/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
-/* 64-bit machines, beware!  SRB. */
-#define SIZEOF_PTR_LOG2			       2
-
 extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode);
 
 /*
@@ -145,7 +135,7 @@ static inline void update_mmu_cache_range(struct vm_fault *vmf,
 #define update_mmu_cache(vma, addr, ptep) \
 	update_mmu_cache_range(NULL, vma, addr, ptep, 1)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* MMU-specific headers */
 
@@ -157,7 +147,7 @@ static inline void update_mmu_cache_range(struct vm_fault *vmf,
 #include <asm/motorola_pgtable.h>
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * Macro to mark a page protection value as "uncacheable".
  */
@@ -182,6 +172,6 @@ pgprot_t pgprot_dmacoherent(pgprot_t prot);
 #define pgprot_dmacoherent(prot)	pgprot_dmacoherent(prot)
 
 #endif /* CONFIG_COLDFIRE */
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _M68K_PGTABLE_H */
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index 8f2676c3a988..3c43c09d4489 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -95,10 +95,24 @@ static inline void set_fc(unsigned long val)
 			      "movec %0,%/dfc\n\t"
 			      : /* no outputs */ : "r" (val) : "memory");
 }
+
+static inline unsigned long get_fc(void)
+{
+	unsigned long val;
+
+	__asm__ ("movec %/dfc,%0" : "=r" (val) : );
+
+	return val;
+}
 #else
 static inline void set_fc(unsigned long val)
 {
 }
+
+static inline unsigned long get_fc(void)
+{
+	return USER_DATA;
+}
 #endif /* CONFIG_CPU_HAS_ADDRESS_SPACES */
 
 struct thread_struct {
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index ea5a80ca1ab3..bc86ce012025 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -4,7 +4,7 @@
 
 #include <uapi/asm/ptrace.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifndef PS_S
 #define PS_S  (0x2000)
@@ -24,5 +24,5 @@
 #define arch_has_block_step()	(1)
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
index 2c99477aaf89..e4ec169f5c7d 100644
--- a/arch/m68k/include/asm/setup.h
+++ b/arch/m68k/include/asm/setup.h
@@ -28,9 +28,9 @@
 
 #define CL_SIZE COMMAND_LINE_SIZE
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern unsigned long m68k_machtype;
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #if !defined(CONFIG_AMIGA)
 #  define MACH_IS_AMIGA (0)
@@ -199,7 +199,7 @@ extern unsigned long m68k_machtype;
 #endif
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern unsigned long m68k_cputype;
 extern unsigned long m68k_fputype;
 extern unsigned long m68k_mmutype;
@@ -213,7 +213,7 @@ extern unsigned long vme_brdtype;
      */
 
 extern int m68k_is040or060;
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #if !defined(CONFIG_M68020)
 #  define CPU_IS_020 (0)
@@ -321,7 +321,7 @@ extern int m68k_is040or060;
 
 #define NUM_MEMINFO	4
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 struct m68k_mem_info {
 	unsigned long addr;		/* physical address of memory chunk */
 	unsigned long size;		/* length of memory chunk (in bytes) */
diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h
index 4a137eecb6fe..1e21c758b774 100644
--- a/arch/m68k/include/asm/sun3_pgalloc.h
+++ b/arch/m68k/include/asm/sun3_pgalloc.h
@@ -17,11 +17,8 @@
 
 extern const char bad_pmd_string[];
 
-#define __pte_free_tlb(tlb, pte, addr)				\
-do {								\
-	pagetable_pte_dtor(page_ptdesc(pte));			\
-	tlb_remove_page_ptdesc((tlb), page_ptdesc(pte));	\
-} while (0)
+#define __pte_free_tlb(tlb, pte, addr)	\
+	tlb_remove_ptdesc((tlb), page_ptdesc(pte))
 
 static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
 {
@@ -43,9 +40,11 @@ static inline pgd_t * pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *new_pgd;
 
-	new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
-	memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
-	memset(new_pgd, 0, (PAGE_OFFSET >> PGDIR_SHIFT));
+	new_pgd = __pgd_alloc(mm, 0);
+	if (likely(new_pgd != NULL)) {
+		memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
+		memset(new_pgd, 0, (PAGE_OFFSET >> PGDIR_SHIFT));
+	}
 	return new_pgd;
 }
 
diff --git a/arch/m68k/include/asm/sun3_pgtable.h b/arch/m68k/include/asm/sun3_pgtable.h
index 30081aee8164..80ca185a18a1 100644
--- a/arch/m68k/include/asm/sun3_pgtable.h
+++ b/arch/m68k/include/asm/sun3_pgtable.h
@@ -4,7 +4,7 @@
 
 #include <asm/sun3mmu.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/virtconvert.h>
 #include <linux/linkage.h>
 
@@ -19,7 +19,7 @@
 #define PTOV(addr)	__va(addr)
 
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 /* These need to be defined for compatibility although the sun3 doesn't use them */
 #define _PAGE_NOCACHE030 0x040
@@ -74,13 +74,7 @@
 /* We borrow bit 6 to store the exclusive marker in swap PTEs. */
 #define _PAGE_SWP_EXCLUSIVE	0x040
 
-#ifndef __ASSEMBLY__
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+#ifndef __ASSEMBLER__
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
@@ -175,7 +169,7 @@ extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -192,5 +186,5 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 	return pte;
 }
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 #endif	/* !_SUN3_PGTABLE_H */
diff --git a/arch/m68k/include/asm/sun3mmu.h b/arch/m68k/include/asm/sun3mmu.h
index 21a75daa278f..fee05cd2ce5b 100644
--- a/arch/m68k/include/asm/sun3mmu.h
+++ b/arch/m68k/include/asm/sun3mmu.h
@@ -67,7 +67,7 @@
 #define SUN3_BUSERR_PROTERR	(0x40)
 #define SUN3_BUSERR_INVALID	(0x80)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* Read bus error status register (implicitly clearing it). */
 static inline unsigned char sun3_get_buserr(void)
@@ -167,6 +167,6 @@ extern void __iomem *sun3_ioremap(unsigned long phys, unsigned long size,
 
 extern int sun3_map_test(unsigned long addr, char *val);
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif	/* !__SUN3_MMU_H__ */
diff --git a/arch/m68k/include/asm/syscall.h b/arch/m68k/include/asm/syscall.h
index d1453e850cdd..bf84b160c2eb 100644
--- a/arch/m68k/include/asm/syscall.h
+++ b/arch/m68k/include/asm/syscall.h
@@ -14,6 +14,13 @@ static inline int syscall_get_nr(struct task_struct *task,
 	return regs->orig_d0;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->orig_d0 = nr;
+}
+
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h
index 3e31adbddc75..5cb3ace55622 100644
--- a/arch/m68k/include/asm/thread_info.h
+++ b/arch/m68k/include/asm/thread_info.h
@@ -22,7 +22,7 @@
 
 #define THREAD_SIZE	(PAGE_SIZE << THREAD_SIZE_ORDER)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct thread_info {
 	struct task_struct	*task;		/* main task structure */
@@ -31,7 +31,7 @@ struct thread_info {
 	__u32			cpu;		/* should always be 0 on m68k */
 	unsigned long		tp_value;	/* thread pointer */
 };
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define INIT_THREAD_INFO(tsk)			\
 {						\
@@ -39,7 +39,7 @@ struct thread_info {
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 }
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /* how to get the thread information struct from C */
 static inline struct thread_info *current_thread_info(void)
 {
diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h
index a9d5c1c870d3..c7b3989bd4b2 100644
--- a/arch/m68k/include/asm/traps.h
+++ b/arch/m68k/include/asm/traps.h
@@ -11,7 +11,7 @@
 #ifndef _M68K_TRAPS_H
 #define _M68K_TRAPS_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
@@ -94,7 +94,7 @@ asmlinkage void bad_inthandler(void);
 
 #define VECOFF(vec) ((vec)<<2)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* Status register bits */
 #define PS_T  (0x8000)
@@ -271,6 +271,6 @@ struct frame {
 asmlinkage void berr_040cleanup(struct frame *fp);
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _M68K_TRAPS_H */
diff --git a/arch/m68k/include/asm/vga.h b/arch/m68k/include/asm/vga.h
index 4742e6bc3ab8..cdd414fa8710 100644
--- a/arch/m68k/include/asm/vga.h
+++ b/arch/m68k/include/asm/vga.h
@@ -9,7 +9,7 @@
  */
 #ifndef CONFIG_PCI
 
-#include <asm/raw_io.h>
+#include <asm/io.h>
 #include <asm/kmap.h>
 
 /*
@@ -29,9 +29,9 @@
 #define inw_p(port)		0
 #define outb_p(port, val)	do { } while (0)
 #define outw(port, val)		do { } while (0)
-#define readb			raw_inb
-#define writeb			raw_outb
-#define writew			raw_outw
+#define readb			__raw_readb
+#define writeb			__raw_writeb
+#define writew			__raw_writew
 
 #endif /* CONFIG_PCI */
 #endif /* _ASM_M68K_VGA_H */
diff --git a/arch/m68k/include/uapi/asm/bootinfo-vme.h b/arch/m68k/include/uapi/asm/bootinfo-vme.h
index f36a09ab5e79..b8139eb39352 100644
--- a/arch/m68k/include/uapi/asm/bootinfo-vme.h
+++ b/arch/m68k/include/uapi/asm/bootinfo-vme.h
@@ -33,7 +33,7 @@
 #define VME_TYPE_BVME6000	0x6000	/* BVM Ltd. BVME6000 */
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * Board ID data structure - pointer to this retrieved from Bug by head.S
@@ -56,7 +56,7 @@ typedef struct {
 	__be32	option2;
 } t_bdid, *p_bdid;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 
     /*
diff --git a/arch/m68k/include/uapi/asm/bootinfo.h b/arch/m68k/include/uapi/asm/bootinfo.h
index 024e87d7095f..28d2d44c08d0 100644
--- a/arch/m68k/include/uapi/asm/bootinfo.h
+++ b/arch/m68k/include/uapi/asm/bootinfo.h
@@ -16,7 +16,7 @@
 #include <linux/types.h>
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
     /*
      *  Bootinfo definitions
@@ -43,7 +43,7 @@ struct mem_info {
 	__be32 size;			/* length of memory chunk (in bytes) */
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 
     /*
@@ -167,7 +167,7 @@ struct mem_info {
 #define BI_VERSION_MAJOR(v)		(((v) >> 16) & 0xffff)
 #define BI_VERSION_MINOR(v)		((v) & 0xffff)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct bootversion {
 	__be16 branch;
@@ -178,7 +178,7 @@ struct bootversion {
 	} machversions[];
 } __packed;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 
 #endif /* _UAPI_ASM_M68K_BOOTINFO_H */
diff --git a/arch/m68k/include/uapi/asm/ptrace.h b/arch/m68k/include/uapi/asm/ptrace.h
index ebd9fccb3d11..d70f771399b4 100644
--- a/arch/m68k/include/uapi/asm/ptrace.h
+++ b/arch/m68k/include/uapi/asm/ptrace.h
@@ -22,7 +22,7 @@
 #define PT_SR	   17
 #define PT_PC	   18
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* this struct defines the way the registers are stored on the
    stack during a system call. */
@@ -81,5 +81,5 @@ struct switch_stack {
 #define PTRACE_GETFDPIC_EXEC	0
 #define PTRACE_GETFDPIC_INTERP	1
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _UAPI_M68K_PTRACE_H */
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 6c732ed3998b..57c1b3e8d60e 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the linux kernel.
 #
 
-extra-y			+= vmlinux.lds
+always-$(KBUILD_BUILTIN)	+= vmlinux.lds
 
 obj-$(CONFIG_MMU_MOTOROLA)	:= head.o
 obj-$(CONFIG_SUN3)		:= sun3-head.o
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index 906d73230537..67a1990f9d74 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -9,6 +9,7 @@
  * #defines from the assembly-language output.
  */
 
+#define COMPILE_OFFSETS
 #define ASM_OFFSETS_C
 
 #include <linux/stddef.h>
diff --git a/arch/m68k/kernel/early_printk.c b/arch/m68k/kernel/early_printk.c
index f11ef9f1f56f..521cbb8a150c 100644
--- a/arch/m68k/kernel/early_printk.c
+++ b/arch/m68k/kernel/early_printk.c
@@ -16,25 +16,10 @@
 #include "../mvme147/mvme147.h"
 #include "../mvme16x/mvme16x.h"
 
-asmlinkage void __init debug_cons_nputs(const char *s, unsigned n);
-
-static void __ref debug_cons_write(struct console *c,
-				   const char *s, unsigned n)
-{
-#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68000) || \
-      defined(CONFIG_COLDFIRE))
-	if (MACH_IS_MVME147)
-		mvme147_scc_write(c, s, n);
-	else if (MACH_IS_MVME16x)
-		mvme16x_cons_write(c, s, n);
-	else
-		debug_cons_nputs(s, n);
-#endif
-}
+asmlinkage void __init debug_cons_nputs(struct console *c, const char *s, unsigned int n);
 
 static struct console early_console_instance = {
 	.name  = "debug",
-	.write = debug_cons_write,
 	.flags = CON_PRINTBUFFER | CON_BOOT,
 	.index = -1
 };
@@ -44,6 +29,12 @@ static int __init setup_early_printk(char *buf)
 	if (early_console || buf)
 		return 0;
 
+	if (MACH_IS_MVME147)
+		early_console_instance.write = mvme147_scc_write;
+	else if (MACH_IS_MVME16x)
+		early_console_instance.write = mvme16x_cons_write;
+	else
+		early_console_instance.write = debug_cons_nputs;
 	early_console = &early_console_instance;
 	register_console(early_console);
 
@@ -51,20 +42,15 @@ static int __init setup_early_printk(char *buf)
 }
 early_param("earlyprintk", setup_early_printk);
 
-/*
- * debug_cons_nputs() defined in arch/m68k/kernel/head.S cannot be called
- * after init sections are discarded (for platforms that use it).
- */
-#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68000) || \
-      defined(CONFIG_COLDFIRE))
-
 static int __init unregister_early_console(void)
 {
-	if (!early_console || MACH_IS_MVME16x)
-		return 0;
+	/*
+	 * debug_cons_nputs() defined in arch/m68k/kernel/head.S cannot be
+	 * called after init sections are discarded (for platforms that use it).
+	 */
+	if (early_console && early_console->write == debug_cons_nputs)
+		return unregister_console(early_console);
 
-	return unregister_console(early_console);
+	return 0;
 }
 late_initcall(unregister_early_console);
-
-#endif
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index 852255cf60de..2e4ef0358887 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -3263,8 +3263,8 @@ func_return	putn
  *	turns around and calls the internal routines.  This routine
  *	is used by the boot console.
  *
- *	The calling parameters are:
- *		void debug_cons_nputs(const char *str, unsigned length)
+ *	The function signature is -
+ *		void debug_cons_nputs(struct console *c, const char *s, unsigned int n)
  *
  *	This routine does NOT understand variable arguments only
  *	simple strings!
@@ -3273,8 +3273,8 @@ ENTRY(debug_cons_nputs)
 	moveml	%d0/%d1/%a0,%sp@-
 	movew	%sr,%sp@-
 	ori	#0x0700,%sr
-	movel	%sp@(18),%a0		/* fetch parameter */
-	movel	%sp@(22),%d1		/* fetch parameter */
+	movel	%sp@(22),%a0		/* char *s */
+	movel	%sp@(26),%d1		/* unsigned int n */
 	jra	2f
 1:
 #ifdef CONSOLE_DEBUG
@@ -3400,6 +3400,7 @@ L(console_clear_loop):
 
 	movel	%d4,%d1				/* screen height in pixels */
 	divul	%a0@(FONT_DESC_HEIGHT),%d1	/* d1 = max num rows */
+	subql	#1,%d1				/* row range is 0 to num - 1 */
 
 	movel	%d0,%a2@(Lconsole_struct_num_columns)
 	movel	%d1,%a2@(Lconsole_struct_num_rows)
@@ -3532,61 +3533,44 @@ func_start	console_putc,%a0/%a1/%d0-%d7
 	tstl	%pc@(L(console_font))
 	jeq	L(console_exit)
 
+	lea	%pc@(L(console_globals)),%a0
+
 	/* Output character in d7 on console.
 	 */
 	movel	ARG1,%d7
 	cmpib	#'\n',%d7
-	jbne	1f
+	jne	L(console_not_lf)
 
-	/* A little safe recursion is good for the soul */
-	console_putc	#'\r'
-1:
-	lea	%pc@(L(console_globals)),%a0
+	clrl	%a0@(Lconsole_struct_cur_column)	/* implicit \r */
 
-	cmpib	#10,%d7
-	jne	L(console_not_lf)
 	movel	%a0@(Lconsole_struct_cur_row),%d0
-	addil	#1,%d0
-	movel	%d0,%a0@(Lconsole_struct_cur_row)
 	movel	%a0@(Lconsole_struct_num_rows),%d1
 	cmpl	%d1,%d0
 	jcs	1f
-	subil	#1,%d0
-	movel	%d0,%a0@(Lconsole_struct_cur_row)
 	console_scroll
+	jra	L(console_exit)
 1:
+	addql	#1,%d0
+	movel	%d0,%a0@(Lconsole_struct_cur_row)
 	jra	L(console_exit)
 
 L(console_not_lf):
-	cmpib	#13,%d7
-	jne	L(console_not_cr)
+	cmpib	#'\r',%d7
+	jne	L(console_not_lf_not_cr)
 	clrl	%a0@(Lconsole_struct_cur_column)
 	jra	L(console_exit)
 
-L(console_not_cr):
-	cmpib	#1,%d7
-	jne	L(console_not_home)
-	clrl	%a0@(Lconsole_struct_cur_row)
-	clrl	%a0@(Lconsole_struct_cur_column)
-	jra	L(console_exit)
-
-/*
- *	At this point we know that the %d7 character is going to be
- *	rendered on the screen.  Register usage is -
- *		a0 = pointer to console globals
- *		a1 = font data
- *		d0 = cursor column
- *		d1 = cursor row to draw the character
- *		d7 = character number
- */
-L(console_not_home):
+	/*
+	 *	At this point we know that the %d7 character is going to be
+	 *	rendered on the screen.  Register usage is -
+	 *	a0 = pointer to console globals
+	 *	a1 = font data
+	 *	d0 = cursor column
+	 *	d1 = cursor row to draw the character
+	 *	d7 = character number
+	 */
+L(console_not_lf_not_cr):
 	movel	%a0@(Lconsole_struct_cur_column),%d0
-	addql	#1,%a0@(Lconsole_struct_cur_column)
-	movel	%a0@(Lconsole_struct_num_columns),%d1
-	cmpl	%d1,%d0
-	jcs	1f
-	console_putc	#'\n'	/* recursion is OK! */
-1:
 	movel	%a0@(Lconsole_struct_cur_row),%d1
 
 	/*
@@ -3633,6 +3617,23 @@ L(console_do_font_scanline):
 	addq	#1,%d1
 	dbra	%d7,L(console_read_char_scanline)
 
+	/*
+	 *	Register usage in the code below:
+	 *	a0 = pointer to console globals
+	 *	d0 = cursor column
+	 *	d1 = cursor column limit
+	 */
+
+	lea	%pc@(L(console_globals)),%a0
+
+	movel	%a0@(Lconsole_struct_cur_column),%d0
+	addql	#1,%d0
+	movel	%d0,%a0@(Lconsole_struct_cur_column)	/* Update cursor pos */
+	movel	%a0@(Lconsole_struct_num_columns),%d1
+	cmpl	%d1,%d0
+	jcs	L(console_exit)
+	console_putc	#'\n'		/* Line wrap using tail recursion */
+
 L(console_exit):
 func_return	console_putc
 
diff --git a/arch/m68k/kernel/pcibios.c b/arch/m68k/kernel/pcibios.c
index 9504eb19d73a..e6ab3f9ff5d8 100644
--- a/arch/m68k/kernel/pcibios.c
+++ b/arch/m68k/kernel/pcibios.c
@@ -44,41 +44,24 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
  */
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	struct resource *r;
 	u16 cmd, newcmd;
-	int idx;
+	int ret;
 
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	newcmd = cmd;
-
-	for (idx = 0; idx < 6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = dev->resource + idx;
-		if (!r->start && r->end) {
-			pr_err("PCI: Device %s not available because of resource collisions\n",
-				pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			newcmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			newcmd |= PCI_COMMAND_MEMORY;
-	}
+	ret = pci_enable_resources(dev, mask);
+	if (ret < 0)
+		return ret;
 
 	/*
 	 * Bridges (eg, cardbus bridges) need to be fully enabled
 	 */
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
+		pci_read_config_word(dev, PCI_COMMAND, &cmd);
 		newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-
-
-	if (newcmd != cmd) {
-		pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n",
-			pci_name(dev), cmd, newcmd);
-		pci_write_config_word(dev, PCI_COMMAND, newcmd);
+		if (newcmd != cmd) {
+			pr_info("PCI: enabling bridge %s (0x%04x -> 0x%04x)\n",
+				pci_name(dev), cmd, newcmd);
+			pci_write_config_word(dev, PCI_COMMAND, newcmd);
+		}
 	}
 	return 0;
 }
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index fda7eac23f87..f5a07a70e938 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -141,7 +141,7 @@ asmlinkage int m68k_clone3(struct pt_regs *regs)
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct fork_frame {
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index c20d590e4297..cfa2df24eced 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -319,7 +319,7 @@ enum m68k_regset {
 
 static const struct user_regset m68k_user_regsets[] = {
 	[REGSET_GPR] = {
-		.core_note_type = NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n = ELF_NGREG,
 		.size = sizeof(u32),
 		.align = sizeof(u16),
@@ -327,7 +327,7 @@ static const struct user_regset m68k_user_regsets[] = {
 	},
 #ifdef CONFIG_FPU
 	[REGSET_FPU] = {
-		.core_note_type = NT_PRFPREG,
+		USER_REGSET_NOTE_TYPE(PRFPREG),
 		.n = sizeof(struct user_m68kfp_struct) / sizeof(u32),
 		.size = sizeof(u32),
 		.align = sizeof(u32),
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 15c1a595a1de..c7e8de0d34bb 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -147,8 +147,7 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
 			break;
 
 		case BI_COMMAND_LINE:
-			strscpy(m68k_command_line, data,
-				sizeof(m68k_command_line));
+			strscpy(m68k_command_line, data);
 			break;
 
 		case BI_RNG_SEED: {
@@ -243,8 +242,7 @@ void __init setup_arch(char **cmdline_p)
 	setup_initial_init_mm((void *)PAGE_OFFSET, _etext, _edata, _end);
 
 #if defined(CONFIG_BOOTPARAM)
-	strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE);
-	m68k_command_line[CL_SIZE - 1] = 0;
+	strscpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE);
 #endif /* CONFIG_BOOTPARAM */
 	process_uboot_commandline(&m68k_command_line[0], CL_SIZE);
 	*cmdline_p = m68k_command_line;
@@ -486,7 +484,7 @@ static int hardware_proc_show(struct seq_file *m, void *v)
 	if (mach_get_model)
 		mach_get_model(model);
 	else
-		strcpy(model, "Unknown m68k");
+		strscpy(model, "Unknown m68k");
 
 	seq_printf(m, "Model:\t\t%s\n", model);
 	for (mem = 0, i = 0; i < m68k_num_memory; i++)
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index c926da9d5ec2..f724875b15cc 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/fb.h>
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/console.h>
@@ -146,8 +145,7 @@ void __init setup_arch(char **cmdline_p)
 
 	/* Keep a copy of command line */
 	*cmdline_p = &command_line[0];
-	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE-1] = 0;
+	strscpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 
 	/*
 	 * Give all the memory to the bootmap allocator, tell it to put the
diff --git a/arch/m68k/kernel/syscalls/syscall.tbl b/arch/m68k/kernel/syscalls/syscall.tbl
index f5ed71f1910d..871a5d67bf41 100644
--- a/arch/m68k/kernel/syscalls/syscall.tbl
+++ b/arch/m68k/kernel/syscalls/syscall.tbl
@@ -466,3 +466,7 @@
 464	common	getxattrat			sys_getxattrat
 465	common	listxattrat			sys_listxattrat
 466	common	removexattrat			sys_removexattrat
+467	common	open_tree_attr			sys_open_tree_attr
+468	common	file_getattr			sys_file_getattr
+469	common	file_setattr			sys_file_setattr
+470	common	listns				sys_listns
diff --git a/arch/m68k/kernel/uboot.c b/arch/m68k/kernel/uboot.c
index 8bb1cb3a7490..fa7c279ead5d 100644
--- a/arch/m68k/kernel/uboot.c
+++ b/arch/m68k/kernel/uboot.c
@@ -10,7 +10,6 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/fb.h>
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/console.h>
@@ -74,7 +73,7 @@ static void __init parse_uboot_commandline(char *commandp, int size)
 	uboot_cmd_end = sp[5];
 
 	if (uboot_cmd_start && uboot_cmd_end)
-		strncpy(commandp, (const char *)uboot_cmd_start, size);
+		strscpy(commandp, (const char *)uboot_cmd_start, size);
 
 #if defined(CONFIG_BLK_DEV_INITRD)
 	uboot_initrd_start = sp[2];
diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile
index 9158688e6cc6..15278a95259e 100644
--- a/arch/m68k/lib/Makefile
+++ b/arch/m68k/lib/Makefile
@@ -4,7 +4,7 @@
 # Makefile for m68k-specific library files..
 #
 
-lib-y	:= muldi3.o memcpy.o memset.o memmove.o
+lib-y	:= memcpy.o memset.o memmove.o
 
 lib-$(CONFIG_MMU) += uaccess.o
 lib-$(CONFIG_CPU_HAS_NO_MULDIV64) += mulsi3.o divsi3.o udivsi3.o
diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c
deleted file mode 100644
index 5012a9b218c7..000000000000
--- a/arch/m68k/lib/muldi3.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and 
-			   gcc-2.7.2.3/longlong.h which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details. */
-
-#include <linux/compiler.h>
-#include <linux/export.h>
-#include <linux/libgcc.h>
-
-#ifdef CONFIG_CPU_HAS_NO_MULDIV64
-
-#define SI_TYPE_SIZE 32
-#define __BITS4 (SI_TYPE_SIZE / 4)
-#define __ll_B (1L << (SI_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((USItype) (t) % __ll_B)
-#define __ll_highpart(t) ((USItype) (t) / __ll_B)
-
-#define umul_ppmm(w1, w0, u, v)						\
-  do {									\
-    USItype __x0, __x1, __x2, __x3;					\
-    USItype __ul, __vl, __uh, __vh;					\
-									\
-    __ul = __ll_lowpart (u);						\
-    __uh = __ll_highpart (u);						\
-    __vl = __ll_lowpart (v);						\
-    __vh = __ll_highpart (v);						\
-									\
-    __x0 = (USItype) __ul * __vl;					\
-    __x1 = (USItype) __ul * __vh;					\
-    __x2 = (USItype) __uh * __vl;					\
-    __x3 = (USItype) __uh * __vh;					\
-									\
-    __x1 += __ll_highpart (__x0);/* this can't give carry */		\
-    __x1 += __x2;		/* but this indeed can */		\
-    if (__x1 < __x2)		/* did we get it? */			\
-      __x3 += __ll_B;		/* yes, add it in the proper pos. */	\
-									\
-    (w1) = __x3 + __ll_highpart (__x1);					\
-    (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0);		\
-  } while (0)
-
-#else
-
-#define umul_ppmm(w1, w0, u, v) \
-  __asm__ ("mulu%.l %3,%1:%0"						\
-           : "=d" ((USItype)(w0)),					\
-             "=d" ((USItype)(w1))					\
-           : "%0" ((USItype)(u)),					\
-             "dmi" ((USItype)(v)))
-
-#endif
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;							\
-    umul_ppmm (__w.s.high, __w.s.low, u, v);				\
-    __w.ll; })
-
-typedef 	 int SItype	__mode(SI);
-typedef unsigned int USItype	__mode(SI);
-typedef		 int DItype	__mode(DI);
-typedef int word_type           __mode(__word__);
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__muldi3 (DItype u, DItype v)
-{
-  DIunion w;
-  DIunion uu, vv;
-
-  uu.ll = u;
-  vv.ll = v;
-
-  w.ll = __umulsidi3 (uu.s.low, vv.s.low);
-  w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-	       + (USItype) uu.s.high * (USItype) vv.s.low);
-
-  return w.ll;
-}
-EXPORT_SYMBOL(__muldi3);
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index e324410ef239..c0033f885ed4 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -15,7 +15,6 @@
 #include <linux/reboot.h>
 #include <linux/types.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/interrupt.h>
 /* keyb */
@@ -23,7 +22,6 @@
 #include <linux/delay.h>
 /* keyb */
 #include <linux/init.h>
-#include <linux/vt_kern.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/adb.h>
@@ -793,7 +791,7 @@ static void __init mac_identify(void)
 	}
 
 	macintosh_config = mac_data_table;
-	for (m = macintosh_config; m->ident != -1; m++) {
+	for (m = &mac_data_table[1]; m->ident != -1; m++) {
 		if (m->ident == model) {
 			macintosh_config = m;
 			break;
diff --git a/arch/m68k/mac/macboing.c b/arch/m68k/mac/macboing.c
index faea2265a540..6312d5b600a5 100644
--- a/arch/m68k/mac/macboing.c
+++ b/arch/m68k/mac/macboing.c
@@ -183,7 +183,7 @@ void mac_mksound( unsigned int freq, unsigned int length )
 
 	local_irq_save(flags);
 
-	del_timer( &mac_sound_timer );
+	timer_delete(&mac_sound_timer);
 
 	for ( i = 0; i < 0x800; i++ )
 		mac_asc_regs[ i ] = 0;
@@ -277,7 +277,7 @@ static void mac_quadra_ring_bell(struct timer_list *unused)
 
 	local_irq_save(flags);
 
-	del_timer( &mac_sound_timer );
+	timer_delete(&mac_sound_timer);
 
 	if ( mac_bell_duration-- > 0 )
 	{
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index 01e6b0e37f8d..9cb813eda4fd 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -621,6 +621,22 @@ static u64 mac_read_clk(struct clocksource *cs)
 	 * These problems are avoided by ignoring the low byte. Clock accuracy
 	 * is 256 times worse (error can reach 0.327 ms) but CPU overhead is
 	 * reduced by avoiding slow VIA register accesses.
+	 *
+	 * The VIA timer counter observably decrements to 0xFFFF before the
+	 * counter reload interrupt gets raised. That complicates things a bit.
+	 *
+	 * State | vT1CH      | VIA_TIMER_1_INT | inference drawn
+	 * ------+------------+-----------------+-----------------------------
+	 * i     | FE thru 00 | false           | counter is decrementing
+	 * ii    | FF         | false           | counter wrapped
+	 * iii   | FF         | true            | wrapped, interrupt raised
+	 * iv    | FF         | false           | wrapped, interrupt handled
+	 * v     | FE thru 00 | true            | wrapped, interrupt unhandled
+	 *
+	 * State iv is never observed because handling the interrupt involves
+	 * a 6522 register access and every access consumes a "phi 2" clock
+	 * cycle. So 0xFF implies either state ii or state iii, depending on
+	 * the value of the VIA_TIMER_1_INT bit.
 	 */
 
 	local_irq_save(flags);
diff --git a/arch/m68k/math-emu/fp_emu.h b/arch/m68k/math-emu/fp_emu.h
index c1ecfef7886a..6ac811c31ca4 100644
--- a/arch/m68k/math-emu/fp_emu.h
+++ b/arch/m68k/math-emu/fp_emu.h
@@ -38,12 +38,12 @@
 #ifndef _FP_EMU_H
 #define _FP_EMU_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #include <asm/asm-offsets.h>
 #endif
 #include <asm/math-emu.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define IS_INF(a) ((a)->exp == 0x7fff)
 #define IS_ZERO(a) ((a)->mant.m64 == 0)
@@ -124,7 +124,7 @@ extern const struct fp_ext fp_Inf;
 			: "a1", "d1", "d2", "memory");		\
 })
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 /*
  * set, reset or clear a bit in the fp status register
@@ -141,6 +141,6 @@ extern const struct fp_ext fp_Inf;
 	btst	#(\bit&7),(FPD_FPSR+3-(\bit/8),FPDATA)
 .endm
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _FP_EMU_H */
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index 1b47bec15832..488411af1b3f 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -68,10 +68,7 @@ void __init paging_init(void)
 
 	high_memory = (void *) end_mem;
 
-	empty_zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!empty_zero_page)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
+	empty_zero_page = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 	max_zone_pfn[ZONE_DMA] = end_mem >> PAGE_SHIFT;
 	free_area_init(max_zone_pfn);
 }
@@ -124,7 +121,5 @@ static inline void init_pointer_tables(void)
 
 void __init mem_init(void)
 {
-	/* this will put all memory onto the freelists */
-	memblock_free_all();
 	init_pointer_tables();
 }
diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
index 9a6fa342e872..19a75029036c 100644
--- a/arch/m68k/mm/mcfmmu.c
+++ b/arch/m68k/mm/mcfmmu.c
@@ -42,20 +42,14 @@ void __init paging_init(void)
 	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 	int i;
 
-	empty_zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!empty_zero_page)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
+	empty_zero_page = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 
 	pg_dir = swapper_pg_dir;
 	memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
 
 	size = num_pages * sizeof(pte_t);
 	size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
-	next_pgtable = (unsigned long) memblock_alloc(size, PAGE_SIZE);
-	if (!next_pgtable)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, size, PAGE_SIZE);
+	next_pgtable = (unsigned long) memblock_alloc_or_panic(size, PAGE_SIZE);
 
 	pg_dir += PAGE_OFFSET >> PGDIR_SHIFT;
 
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index c1761d309fc6..62283bc2ed79 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -92,22 +92,24 @@ void mmu_page_dtor(void *page)
 }
 
 /* ++andreas: {get,free}_pointer_table rewritten to use unused fields from
-   struct page instead of separately kmalloced struct.  Stolen from
+   struct ptdesc instead of separately kmalloced struct.  Stolen from
    arch/sparc/mm/srmmu.c ... */
 
 typedef struct list_head ptable_desc;
 
-static struct list_head ptable_list[2] = {
+static struct list_head ptable_list[3] = {
 	LIST_HEAD_INIT(ptable_list[0]),
 	LIST_HEAD_INIT(ptable_list[1]),
+	LIST_HEAD_INIT(ptable_list[2]),
 };
 
-#define PD_PTABLE(page) ((ptable_desc *)&(virt_to_page((void *)(page))->lru))
-#define PD_PAGE(ptable) (list_entry(ptable, struct page, lru))
-#define PD_MARKBITS(dp) (*(unsigned int *)&PD_PAGE(dp)->index)
+#define PD_PTABLE(ptdesc) ((ptable_desc *)&(virt_to_ptdesc((void *)(ptdesc))->pt_list))
+#define PD_PTDESC(ptable) (list_entry(ptable, struct ptdesc, pt_list))
+#define PD_MARKBITS(dp) (*(unsigned int *)&PD_PTDESC(dp)->pt_index)
 
-static const int ptable_shift[2] = {
-	7+2, /* PGD, PMD */
+static const int ptable_shift[3] = {
+	7+2, /* PGD */
+	7+2, /* PMD */
 	6+2, /* PTE */
 };
 
@@ -118,10 +120,10 @@ void __init init_pointer_table(void *table, int type)
 {
 	ptable_desc *dp;
 	unsigned long ptable = (unsigned long)table;
-	unsigned long page = ptable & PAGE_MASK;
-	unsigned int mask = 1U << ((ptable - page)/ptable_size(type));
+	unsigned long pt_addr = ptable & PAGE_MASK;
+	unsigned int mask = 1U << ((ptable - pt_addr)/ptable_size(type));
 
-	dp = PD_PTABLE(page);
+	dp = PD_PTABLE(pt_addr);
 	if (!(PD_MARKBITS(dp) & mask)) {
 		PD_MARKBITS(dp) = ptable_mask(type);
 		list_add(dp, &ptable_list[type]);
@@ -130,14 +132,14 @@ void __init init_pointer_table(void *table, int type)
 	PD_MARKBITS(dp) &= ~mask;
 	pr_debug("init_pointer_table: %lx, %x\n", ptable, PD_MARKBITS(dp));
 
-	/* unreserve the page so it's possible to free that page */
-	__ClearPageReserved(PD_PAGE(dp));
-	init_page_count(PD_PAGE(dp));
+	/* unreserve the ptdesc so it's possible to free that ptdesc */
+	__ClearPageReserved(ptdesc_page(PD_PTDESC(dp)));
+	init_page_count(ptdesc_page(PD_PTDESC(dp)));
 
 	return;
 }
 
-void *get_pointer_table(int type)
+void *get_pointer_table(struct mm_struct *mm, int type)
 {
 	ptable_desc *dp = ptable_list[type].next;
 	unsigned int mask = list_empty(&ptable_list[type]) ? 0 : PD_MARKBITS(dp);
@@ -145,32 +147,44 @@ void *get_pointer_table(int type)
 
 	/*
 	 * For a pointer table for a user process address space, a
-	 * table is taken from a page allocated for the purpose.  Each
-	 * page can hold 8 pointer tables.  The page is remapped in
+	 * table is taken from a ptdesc allocated for the purpose.  Each
+	 * ptdesc can hold 8 pointer tables.  The ptdesc is remapped in
 	 * virtual address space to be noncacheable.
 	 */
 	if (mask == 0) {
-		void *page;
+		struct ptdesc *ptdesc;
 		ptable_desc *new;
+		void *pt_addr;
 
-		if (!(page = (void *)get_zeroed_page(GFP_KERNEL)))
+		ptdesc = pagetable_alloc(GFP_KERNEL | __GFP_ZERO, 0);
+		if (!ptdesc)
 			return NULL;
 
-		if (type == TABLE_PTE) {
+		pt_addr = ptdesc_address(ptdesc);
+
+		switch (type) {
+		case TABLE_PTE:
 			/*
 			 * m68k doesn't have SPLIT_PTE_PTLOCKS for not having
 			 * SMP.
 			 */
-			pagetable_pte_ctor(virt_to_ptdesc(page));
+			pagetable_pte_ctor(mm, ptdesc);
+			break;
+		case TABLE_PMD:
+			pagetable_pmd_ctor(mm, ptdesc);
+			break;
+		case TABLE_PGD:
+			pagetable_pgd_ctor(ptdesc);
+			break;
 		}
 
-		mmu_page_ctor(page);
+		mmu_page_ctor(pt_addr);
 
-		new = PD_PTABLE(page);
+		new = PD_PTABLE(pt_addr);
 		PD_MARKBITS(new) = ptable_mask(type) - 1;
 		list_add_tail(new, dp);
 
-		return (pmd_t *)page;
+		return (pmd_t *)pt_addr;
 	}
 
 	for (tmp = 1, off = 0; (mask & tmp) == 0; tmp <<= 1, off += ptable_size(type))
@@ -180,29 +194,27 @@ void *get_pointer_table(int type)
 		/* move to end of list */
 		list_move_tail(dp, &ptable_list[type]);
 	}
-	return page_address(PD_PAGE(dp)) + off;
+	return ptdesc_address(PD_PTDESC(dp)) + off;
 }
 
 int free_pointer_table(void *table, int type)
 {
 	ptable_desc *dp;
 	unsigned long ptable = (unsigned long)table;
-	unsigned long page = ptable & PAGE_MASK;
-	unsigned int mask = 1U << ((ptable - page)/ptable_size(type));
+	unsigned long pt_addr = ptable & PAGE_MASK;
+	unsigned int mask = 1U << ((ptable - pt_addr)/ptable_size(type));
 
-	dp = PD_PTABLE(page);
+	dp = PD_PTABLE(pt_addr);
 	if (PD_MARKBITS (dp) & mask)
 		panic ("table already free!");
 
 	PD_MARKBITS (dp) |= mask;
 
 	if (PD_MARKBITS(dp) == ptable_mask(type)) {
-		/* all tables in page are free, free page */
+		/* all tables in ptdesc are free, free ptdesc */
 		list_del(dp);
-		mmu_page_dtor((void *)page);
-		if (type == TABLE_PTE)
-			pagetable_pte_dtor(virt_to_ptdesc((void *)page));
-		free_page (page);
+		mmu_page_dtor((void *)pt_addr);
+		pagetable_dtor_free(virt_to_ptdesc((void *)pt_addr));
 		return 1;
 	} else if (ptable_list[type].next != dp) {
 		/*
@@ -491,10 +503,7 @@ void __init paging_init(void)
 	 * initialize the bad page table and bad page to point
 	 * to a couple of allocated pages
 	 */
-	empty_zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!empty_zero_page)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
+	empty_zero_page = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 
 	/*
 	 * Set up SFC/DFC registers
diff --git a/arch/m68k/mm/sun3mmu.c b/arch/m68k/mm/sun3mmu.c
index 494739c1783e..1ecf6bdd08bf 100644
--- a/arch/m68k/mm/sun3mmu.c
+++ b/arch/m68k/mm/sun3mmu.c
@@ -44,10 +44,7 @@ void __init paging_init(void)
 	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0, };
 	unsigned long size;
 
-	empty_zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!empty_zero_page)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
+	empty_zero_page = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 
 	address = PAGE_OFFSET;
 	pg_dir = swapper_pg_dir;
@@ -57,10 +54,7 @@ void __init paging_init(void)
 	size = num_pages * sizeof(pte_t);
 	size = (size + PAGE_SIZE) & ~(PAGE_SIZE-1);
 
-	next_pgtable = (unsigned long)memblock_alloc(size, PAGE_SIZE);
-	if (!next_pgtable)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, size, PAGE_SIZE);
+	next_pgtable = (unsigned long)memblock_alloc_or_panic(size, PAGE_SIZE);
 	bootmem_end = (next_pgtable + size + PAGE_SIZE) & PAGE_MASK;
 
 	/* Map whole memory from PAGE_OFFSET (0x0E000000) */
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index de7870ad2a30..5a4258697622 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -13,14 +13,12 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/major.h>
 #include <linux/serial_reg.h>
 #include <linux/rtc.h>
-#include <linux/vt_kern.h>
 #include <linux/bcd.h>
 #include <linux/platform_device.h>
 
diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c
index 119bd32efcfb..b39fc3717d8e 100644
--- a/arch/m68k/sun3/mmu_emu.c
+++ b/arch/m68k/sun3/mmu_emu.c
@@ -17,6 +17,7 @@
 #include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/sched/mm.h>
+#include <linux/string_choices.h>
 
 #include <asm/setup.h>
 #include <asm/traps.h>
@@ -370,8 +371,8 @@ int mmu_emu_handle_fault (unsigned long vaddr, int read_flag, int kernel_fault)
 	}
 
 #ifdef DEBUG_MMU_EMU
-	pr_info("%s: vaddr=%lx type=%s crp=%p\n", __func__, vaddr,
-		read_flag ? "read" : "write", crp);
+	pr_info("%s: vaddr=%lx type=%s crp=%px\n", __func__, vaddr,
+		str_read_write(read_flag), crp);
 #endif
 
 	segment = (vaddr >> SUN3_PMEG_SIZE_BITS) & 0x7FF;
@@ -417,7 +418,7 @@ int mmu_emu_handle_fault (unsigned long vaddr, int read_flag, int kernel_fault)
 		pte_val (*pte) |= SUN3_PAGE_ACCESSED;
 
 #ifdef DEBUG_MMU_EMU
-	pr_info("seg:%ld crp:%p ->", get_fs().seg, crp);
+	pr_info("seg:%ld crp:%px ->", get_fc(), crp);
 	print_pte_vaddr (vaddr);
 	pr_cont("\n");
 #endif
diff --git a/arch/m68k/sun3/sun3dvma.c b/arch/m68k/sun3/sun3dvma.c
index 6ebf52740ad7..225fc735e466 100644
--- a/arch/m68k/sun3/sun3dvma.c
+++ b/arch/m68k/sun3/sun3dvma.c
@@ -252,12 +252,8 @@ void __init dvma_init(void)
 
 	list_add(&(hole->list), &hole_list);
 
-	iommu_use = memblock_alloc(IOMMU_TOTAL_ENTRIES * sizeof(unsigned long),
+	iommu_use = memblock_alloc_or_panic(IOMMU_TOTAL_ENTRIES * sizeof(unsigned long),
 				   SMP_CACHE_BYTES);
-	if (!iommu_use)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      IOMMU_TOTAL_ENTRIES * sizeof(unsigned long));
-
 	dvma_unmap_iommu(DVMA_START, DVMA_SIZE);
 
 	sun3_dvma_init();
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index f18ec02ddeb2..484ebb3baedf 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -28,7 +28,6 @@ config MICROBLAZE
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
-	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
 	select HAVE_PAGE_SIZE_4KB
diff --git a/arch/microblaze/Kconfig.platform b/arch/microblaze/Kconfig.platform
index 7795f90dad86..9cf9007ed69a 100644
--- a/arch/microblaze/Kconfig.platform
+++ b/arch/microblaze/Kconfig.platform
@@ -8,10 +8,10 @@
 menu "Platform options"
 
 config OPT_LIB_FUNCTION
-	bool "Optimalized lib function"
+	bool "Optimized lib function"
 	default y
 	help
-	  Allows turn on optimalized library function (memcpy and memmove).
+	  Turns on optimized library functions (memcpy and memmove).
 	  They are optimized by using word alignment. This will work
 	  fine if both source and destination are aligned on the same
 	  boundary. However, if they are aligned on different boundaries
@@ -19,13 +19,13 @@ config OPT_LIB_FUNCTION
 	  on MicroBlaze systems without a barrel shifter.
 
 config OPT_LIB_ASM
-	bool "Optimalized lib function ASM"
+	bool "Optimized lib function ASM"
 	depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
 	depends on CPU_BIG_ENDIAN
 	default n
 	help
-	  Allows turn on optimalized library function (memcpy and memmove).
-	  Function are written in asm code.
+	  Turns on optimized library functions (memcpy and memmove).
+	  They are written in assembly.
 
 # Definitions for MICROBLAZE0
 comment "Definitions for MICROBLAZE0"
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index 176314f3c9aa..fbbdcb394ca2 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -73,7 +73,7 @@ CONFIG_FB_XILINX=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 CONFIG_UIO_DMEM_GENIRQ=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
diff --git a/arch/microblaze/include/asm/asm-compat.h b/arch/microblaze/include/asm/asm-compat.h
index c05259ce2d2c..9f0461476231 100644
--- a/arch/microblaze/include/asm/asm-compat.h
+++ b/arch/microblaze/include/asm/asm-compat.h
@@ -4,7 +4,7 @@
 
 #include <asm/types.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #  define stringify_in_c(...)	__VA_ARGS__
 #  define ASM_CONST(x)		x
 #else
diff --git a/arch/microblaze/include/asm/current.h b/arch/microblaze/include/asm/current.h
index a4bb45be30e6..099e69f32bf9 100644
--- a/arch/microblaze/include/asm/current.h
+++ b/arch/microblaze/include/asm/current.h
@@ -14,13 +14,13 @@
  * but check asm/microblaze/kernel/entry.S to be sure.
  */
 #define CURRENT_TASK	r31
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 /*
  * Dedicate r31 to keeping the current task pointer
  */
 register struct task_struct *current asm("r31");
 
 # define get_current()	current
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_MICROBLAZE_CURRENT_H */
diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
index 6c42bed41166..9efadf12397c 100644
--- a/arch/microblaze/include/asm/entry.h
+++ b/arch/microblaze/include/asm/entry.h
@@ -21,7 +21,7 @@
 
 #define PER_CPU(var) var
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 DECLARE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */
 DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */
 DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
@@ -29,6 +29,6 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
 DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
 
 extern asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall);
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_MICROBLAZE_ENTRY_H */
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
index 967f175173e1..c4591e4f7175 100644
--- a/arch/microblaze/include/asm/exceptions.h
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -11,7 +11,7 @@
 #define _ASM_MICROBLAZE_EXCEPTIONS_H
 
 #ifdef __KERNEL__
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* Macros to enable and disable HW exceptions in the MSR */
 /* Define MSR enable bit for HW exceptions */
@@ -64,6 +64,6 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig);
 void die(const char *str, struct pt_regs *fp, long err);
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
 
-#endif /*__ASSEMBLY__ */
+#endif /*__ASSEMBLER__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_EXCEPTIONS_H */
diff --git a/arch/microblaze/include/asm/fixmap.h b/arch/microblaze/include/asm/fixmap.h
index e6e9288bff76..f9797849e4d4 100644
--- a/arch/microblaze/include/asm/fixmap.h
+++ b/arch/microblaze/include/asm/fixmap.h
@@ -15,7 +15,7 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/kernel.h>
 #include <asm/page.h>
 #ifdef CONFIG_HIGHMEM
@@ -62,5 +62,5 @@ extern void __set_fixmap(enum fixed_addresses idx,
 
 #include <asm-generic/fixmap.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 #endif
diff --git a/arch/microblaze/include/asm/ftrace.h b/arch/microblaze/include/asm/ftrace.h
index 4ca38b92a3a2..27c1bafb669c 100644
--- a/arch/microblaze/include/asm/ftrace.h
+++ b/arch/microblaze/include/asm/ftrace.h
@@ -7,7 +7,7 @@
 #define MCOUNT_ADDR		((unsigned long)(_mcount))
 #define MCOUNT_INSN_SIZE	8 /* sizeof mcount call */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern void _mcount(void);
 extern void ftrace_call_graph(void);
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr);
diff --git a/arch/microblaze/include/asm/kgdb.h b/arch/microblaze/include/asm/kgdb.h
index 8dc5ebb07fd5..321c3c8bfcf2 100644
--- a/arch/microblaze/include/asm/kgdb.h
+++ b/arch/microblaze/include/asm/kgdb.h
@@ -3,7 +3,7 @@
 #ifndef __MICROBLAZE_KGDB_H__
 #define __MICROBLAZE_KGDB_H__
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define CACHE_FLUSH_IS_SAFE	1
 #define BUFMAX			2048
@@ -27,6 +27,6 @@ static inline void arch_kgdb_breakpoint(void)
 struct pt_regs;
 asmlinkage void microblaze_kgdb_break(struct pt_regs *regs);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __MICROBLAZE_KGDB_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index b928a87c0076..7262dc4da338 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -9,7 +9,7 @@
 #define _ASM_MICROBLAZE_MMU_H
 
 #  ifdef __KERNEL__
-#   ifndef __ASSEMBLY__
+#   ifndef __ASSEMBLER__
 
 /* Default "unsigned long" context */
 typedef unsigned long mm_context_t;
@@ -56,7 +56,7 @@ extern void _tlbia(void);		/* invalidate all TLB entries */
  * mapping has to increase tlb_skip size.
  */
 extern u32 tlb_skip;
-#   endif /* __ASSEMBLY__ */
+#   endif /* __ASSEMBLER__ */
 
 /*
  * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 90fc9c81debd..90ac9f34b4b4 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -25,7 +25,7 @@
 
 #define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * PAGE_OFFSET -- the first address of the first page of memory. With MMU
@@ -100,7 +100,7 @@ extern int page_is_ram(unsigned long pfn);
 #  define page_to_virt(page)   __va(page_to_pfn(page) << PAGE_SHIFT)
 
 #  define ARCH_PFN_OFFSET	(memory_start >> PAGE_SHIFT)
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 
 /* Convert between virtual and physical address for MMU. */
 /* Handle MicroBlaze processor with virtual memory. */
@@ -113,7 +113,7 @@ extern int page_is_ram(unsigned long pfn);
 #define tovirt(rd, rs) \
 	addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 # define __pa(x)	__virt_to_phys((unsigned long)(x))
 # define __va(x)	((void *)__phys_to_virt((unsigned long)(x)))
@@ -130,7 +130,7 @@ static inline const void *pfn_to_virt(unsigned long pfn)
 
 #define	virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define TOPHYS(addr)  __virt_to_phys(addr)
 
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 6c33b05f730f..084a8a0dc239 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -21,12 +21,7 @@
 
 extern void __bad_pte(pmd_t *pmd);
 
-static inline pgd_t *get_pgd(void)
-{
-	return (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, 0);
-}
-
-#define pgd_alloc(mm)		get_pgd()
+#define pgd_alloc(mm)		__pgd_alloc(mm, 0)
 
 extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm);
 
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index e4ea2ec3642f..4eb76de6be4a 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -10,14 +10,14 @@
 
 #include <asm/setup.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern int mem_init_done;
 #endif
 
 #include <asm-generic/pgtable-nopmd.h>
 
 #ifdef __KERNEL__
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/sched.h>
 #include <linux/threads.h>
@@ -39,7 +39,7 @@ extern pte_t *va_to_pte(unsigned long address);
 #define VMALLOC_START	(CONFIG_KERNEL_START + CONFIG_LOWMEM_SIZE)
 #define VMALLOC_END	ioremap_bot
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * Macro to mark a page protection value as "uncacheable".
@@ -99,7 +99,6 @@ extern pte_t *va_to_pte(unsigned long address);
 #define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
 
 #define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_PGD_NR	0
 
 #define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
 #define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
@@ -208,7 +207,7 @@ extern pte_t *va_to_pte(unsigned long address);
  * Also, write permissions imply read permissions.
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
@@ -216,7 +215,7 @@ extern pte_t *va_to_pte(unsigned long address);
 extern unsigned long empty_zero_page[1024];
 #define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
 #define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
@@ -237,7 +236,7 @@ extern unsigned long empty_zero_page[1024];
 #define pfn_pte(pfn, prot) \
 	__pte(((pte_basic_t)(pfn) << PFN_PTE_SHIFT) | pgprot_val(prot))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * The following only work if pte_present() is true.
  * Undefined behaviour if not..
@@ -285,14 +284,6 @@ static inline pte_t mk_pte_phys(phys_addr_t physpage, pgprot_t pgprot)
 	return pte;
 }
 
-#define mk_pte(page, pgprot) \
-({									   \
-	pte_t pte;							   \
-	pte_val(pte) = (((page - mem_map) << PAGE_SHIFT) + memory_start) |  \
-			pgprot_val(pgprot);				   \
-	pte;								   \
-})
-
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
@@ -406,7 +397,7 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) >> 2 })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val << 2 })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -444,13 +435,13 @@ extern int mem_init_done;
 
 asmlinkage void __init mmu_init(void);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __KERNEL__ */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern unsigned long ioremap_bot, ioremap_base;
 
 void setup_memory(void);
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_MICROBLAZE_PGTABLE_H */
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index 4e193c7550df..d59bdfffca7c 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -14,7 +14,7 @@
 #include <asm/entry.h>
 #include <asm/current.h>
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 /* from kernel/cpu/mb.c */
 extern const struct seq_operations cpuinfo_op;
 
@@ -29,7 +29,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
 extern void ret_from_fork(void);
 extern void ret_from_kernel_thread(void);
 
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 
 /*
  * This is used to define STACK_TOP, and with MMU it must be below
@@ -45,7 +45,7 @@ extern void ret_from_kernel_thread(void);
 
 # define THREAD_KSP	0
 
-#  ifndef __ASSEMBLY__
+#  ifndef __ASSEMBLER__
 
 /* If you change this, you must change the associated assembly-languages
  * constants defined below, THREAD_*.
@@ -88,5 +88,5 @@ unsigned long __get_wchan(struct task_struct *p);
 extern struct dentry *of_debugfs_root;
 #endif
 
-#  endif /* __ASSEMBLY__ */
+#  endif /* __ASSEMBLER__ */
 #endif /* _ASM_MICROBLAZE_PROCESSOR_H */
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
index bfcb89df5e26..17982292a64f 100644
--- a/arch/microblaze/include/asm/ptrace.h
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -7,7 +7,7 @@
 
 #include <uapi/asm/ptrace.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define kernel_mode(regs)		((regs)->pt_mode)
 #define user_mode(regs)			(!kernel_mode(regs))
 
@@ -20,5 +20,5 @@ static inline long regs_return_value(struct pt_regs *regs)
 	return regs->r3;
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_MICROBLAZE_PTRACE_H */
diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h
index a9311ad84a67..f5008f5e7a5c 100644
--- a/arch/microblaze/include/asm/sections.h
+++ b/arch/microblaze/include/asm/sections.h
@@ -10,11 +10,11 @@
 
 #include <asm-generic/sections.h>
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 extern char _ssbss[], _esbss[];
 extern unsigned long __ivt_start[], __ivt_end[];
 
 extern u32 _fdt_start[], _fdt_end[];
 
-# endif /* !__ASSEMBLY__ */
+# endif /* !__ASSEMBLER__ */
 #endif /* _ASM_MICROBLAZE_SECTIONS_H */
diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index bf2600f75959..837ed0bbae4b 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -9,7 +9,7 @@
 
 #include <uapi/asm/setup.h>
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 extern char cmd_line[COMMAND_LINE_SIZE];
 
 extern char *klimit;
@@ -25,5 +25,5 @@ void machine_shutdown(void);
 void machine_halt(void);
 void machine_power_off(void);
 
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 #endif /* _ASM_MICROBLAZE_SETUP_H */
diff --git a/arch/microblaze/include/asm/syscall.h b/arch/microblaze/include/asm/syscall.h
index 5eb3f624cc59..b5b6b91fae3e 100644
--- a/arch/microblaze/include/asm/syscall.h
+++ b/arch/microblaze/include/asm/syscall.h
@@ -14,6 +14,13 @@ static inline long syscall_get_nr(struct task_struct *task,
 	return regs->r12;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->r12 = nr;
+}
+
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index a0ddd2a36fb9..0153f7c2717c 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -13,7 +13,7 @@
 #define THREAD_SIZE		(1 << THREAD_SHIFT)
 #define THREAD_SIZE_ORDER	1
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 # include <linux/types.h>
 # include <asm/processor.h>
 
@@ -86,7 +86,7 @@ static inline struct thread_info *current_thread_info(void)
 }
 
 /* thread information allocation */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * thread information flags
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index cfe3f888b432..fedda9908aa9 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -8,7 +8,7 @@
 
 #include <uapi/asm/unistd.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* #define __ARCH_WANT_OLD_READDIR */
 /* #define __ARCH_WANT_OLD_STAT */
@@ -33,6 +33,6 @@
 #define __ARCH_WANT_SYS_VFORK
 #define __ARCH_WANT_SYS_FORK
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_MICROBLAZE_UNISTD_H */
diff --git a/arch/microblaze/include/asm/xilinx_mb_manager.h b/arch/microblaze/include/asm/xilinx_mb_manager.h
index 7b6995722b0c..121a3224882b 100644
--- a/arch/microblaze/include/asm/xilinx_mb_manager.h
+++ b/arch/microblaze/include/asm/xilinx_mb_manager.h
@@ -5,7 +5,7 @@
 #ifndef _XILINX_MB_MANAGER_H
 #define _XILINX_MB_MANAGER_H
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 
 #include <linux/of_address.h>
 
@@ -21,7 +21,7 @@ void xmb_manager_register(uintptr_t phys_baseaddr, u32 cr_val,
 			  void *priv, void (*reset_callback)(void *data));
 asmlinkage void xmb_inject_err(void);
 
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 
 /* Error injection offset */
 #define XMB_INJECT_ERR_OFFSET	0x200
diff --git a/arch/microblaze/include/uapi/asm/ptrace.h b/arch/microblaze/include/uapi/asm/ptrace.h
index 46dd94cb7802..8039957a1a9c 100644
--- a/arch/microblaze/include/uapi/asm/ptrace.h
+++ b/arch/microblaze/include/uapi/asm/ptrace.h
@@ -10,7 +10,7 @@
 #ifndef _UAPI_ASM_MICROBLAZE_PTRACE_H
 #define _UAPI_ASM_MICROBLAZE_PTRACE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef unsigned long microblaze_reg_t;
 
@@ -68,6 +68,6 @@ struct pt_regs {
 
 #endif /* __KERNEL */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _UAPI_ASM_MICROBLAZE_PTRACE_H */
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index 85c4d29ef43e..241e466e7333 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -11,7 +11,7 @@ CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_process.o = -pg
 endif
 
-extra-y := vmlinux.lds
+always-$(KBUILD_BUILTIN) := vmlinux.lds
 
 obj-y += head.o dma.o exceptions.o \
 	hw_exception_handler.o irq.o \
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index 104c3ac5f30c..b4b67d58e7f6 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -7,6 +7,7 @@
  * License. See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/init.h>
 #include <linux/stddef.h>
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 56342e11442d..6cbf642d7b80 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -54,7 +54,7 @@ void flush_thread(void)
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *childregs = task_pt_regs(p);
diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl
index 680f568b77f2..022fc85d94b3 100644
--- a/arch/microblaze/kernel/syscalls/syscall.tbl
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -472,3 +472,7 @@
 464	common	getxattrat			sys_getxattrat
 465	common	listxattrat			sys_listxattrat
 466	common	removexattrat			sys_removexattrat
+467	common	open_tree_attr			sys_open_tree_attr
+468	common	file_getattr			sys_file_getattr
+469	common	file_setattr			sys_file_setattr
+470	common	listns				sys_listns
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index 26c385582c3b..a2ab67b747a1 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -193,7 +193,7 @@ static struct timecounter xilinx_tc = {
 	.cc = NULL,
 };
 
-static u64 xilinx_cc_read(const struct cyclecounter *cc)
+static u64 xilinx_cc_read(struct cyclecounter *cc)
 {
 	return xilinx_read(NULL);
 }
@@ -252,7 +252,7 @@ static int __init xilinx_timer_init(struct device_node *timer)
 	int ret;
 
 	/* If this property is present, the device is a PWM and not a timer */
-	if (of_property_read_bool(timer, "#pwm-cells"))
+	if (of_property_present(timer, "#pwm-cells"))
 		return 0;
 
 	if (initialized)
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 4520c5741579..31d475cdb1c5 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -52,19 +52,6 @@ static void __init highmem_init(void)
 	map_page(PKMAP_BASE, 0, 0);	/* XXX gross */
 	pkmap_page_table = virt_to_kpte(PKMAP_BASE);
 }
-
-static void __meminit highmem_setup(void)
-{
-	unsigned long pfn;
-
-	for (pfn = max_low_pfn; pfn < max_pfn; ++pfn) {
-		struct page *page = pfn_to_page(pfn);
-
-		/* FIXME not sure about */
-		if (!memblock_is_reserved(pfn << PAGE_SHIFT))
-			free_highmem_page(page);
-	}
-}
 #endif /* CONFIG_HIGHMEM */
 
 /*
@@ -104,17 +91,13 @@ void __init setup_memory(void)
 	 *
 	 * min_low_pfn - the first page (mm/bootmem.c - node_boot_start)
 	 * max_low_pfn
-	 * max_mapnr - the first unused page (mm/bootmem.c - node_low_pfn)
 	 */
 
 	/* memory start is from the kernel end (aligned) to higher addr */
 	min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */
-	/* RAM is assumed contiguous */
-	max_mapnr = memory_size >> PAGE_SHIFT;
 	max_low_pfn = ((u64)memory_start + (u64)lowmem_size) >> PAGE_SHIFT;
 	max_pfn = ((u64)memory_start + (u64)memory_size) >> PAGE_SHIFT;
 
-	pr_info("%s: max_mapnr: %#lx\n", __func__, max_mapnr);
 	pr_info("%s: min_low_pfn: %#lx\n", __func__, min_low_pfn);
 	pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
 	pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn);
@@ -124,14 +107,6 @@ void __init setup_memory(void)
 
 void __init mem_init(void)
 {
-	high_memory = (void *)__va(memory_start + lowmem_size - 1);
-
-	/* this will put all memory onto the freelists */
-	memblock_free_all();
-#ifdef CONFIG_HIGHMEM
-	highmem_setup();
-#endif
-
 	mem_init_done = 1;
 }
 
@@ -143,7 +118,7 @@ int page_is_ram(unsigned long pfn)
 /*
  * Check for command-line options that affect what MMU_init will do.
  */
-static void mm_cmdline_setup(void)
+static void __init mm_cmdline_setup(void)
 {
 	unsigned long maxmem = 0;
 	char *p = cmd_line;
diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
index 9f73265aad4e..e96dd1b7aba4 100644
--- a/arch/microblaze/mm/pgtable.c
+++ b/arch/microblaze/mm/pgtable.c
@@ -245,7 +245,7 @@ unsigned long iopa(unsigned long addr)
 __ref pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
 {
 	if (mem_init_done)
-		return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+		return __pte_alloc_one_kernel(mm);
 	else
 		return memblock_alloc_try_nid(PAGE_SIZE, PAGE_SIZE,
 					      MEMBLOCK_LOW_LIMIT,
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index bca37ddf974b..41a00fa860c1 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -11,6 +11,7 @@ platform-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon/
 platform-$(CONFIG_EYEQ)			+= mobileye/
 platform-$(CONFIG_MIPS_COBALT)		+= cobalt/
 platform-$(CONFIG_MACH_DECSTATION)	+= dec/
+platform-$(CONFIG_ECONET)		+= econet/
 platform-$(CONFIG_MIPS_GENERIC)		+= generic/
 platform-$(CONFIG_MACH_JAZZ)		+= jazz/
 platform-$(CONFIG_LANTIQ)		+= lantiq/
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 467b10f4361a..b88b97139fa8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -6,7 +6,7 @@ config MIPS
 	select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
 	select ARCH_HAS_CPU_CACHE_ALIASING
 	select ARCH_HAS_CPU_FINALIZE_INIT
-	select ARCH_HAS_CURRENT_STACK_POINTER if !CC_IS_CLANG || CLANG_VERSION >= 140000
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if !64BIT
 	select ARCH_HAS_DMA_OPS if MACH_JAZZ
 	select ARCH_HAS_FORTIFY_SOURCE
@@ -29,14 +29,15 @@ config MIPS
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select BUILDTIME_TABLE_SORT
+	select BUILTIN_DTB_ALL if BUILTIN_DTB
 	select CLONE_BACKWARDS
 	select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
 	select CPU_PM if CPU_IDLE || SUSPEND
 	select GENERIC_ATOMIC64 if !64BIT
+	select GENERIC_BUILTIN_DTB if BUILTIN_DTB
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_GETTIMEOFDAY
-	select GENERIC_IOMAP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_ISA_DMA if EISA
@@ -45,6 +46,7 @@ config MIPS
 	select GENERIC_LIB_CMPDI2
 	select GENERIC_LIB_LSHRDI3
 	select GENERIC_LIB_UCMPDI2
+	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_IDLE_POLL_SETUP
@@ -70,7 +72,6 @@ config MIPS
 	select HAVE_EBPF_JIT if !CPU_MICROMIPS
 	select HAVE_EXIT_THREAD
 	select HAVE_GUP_FAST
-	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
 	select HAVE_GCC_PLUGINS
@@ -388,6 +389,31 @@ config MACH_DECSTATION
 
 	  otherwise choose R3000.
 
+config ECONET
+	bool "EcoNet MIPS family"
+	select BOOT_RAW
+	select CPU_BIG_ENDIAN
+	select DEBUG_ZBOOT if DEBUG_KERNEL
+	select EARLY_PRINTK_8250
+	select ECONET_EN751221_TIMER
+	select SERIAL_8250
+	select SERIAL_OF_PLATFORM
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_MIPS16
+	select SYS_SUPPORTS_ZBOOT_UART16550
+	select USE_GENERIC_EARLY_PRINTK_8250
+	select USE_OF
+	help
+	  EcoNet EN75xx MIPS devices are big endian MIPS machines used
+	  in XPON (fiber) and DSL applications. They have SPI, PCI, USB,
+	  GPIO, and Ethernet, with optional XPON, DSL, and VoIP DSP cores.
+	  Don't confuse these with the Airoha ARM devices sometimes referred
+	  to as "EcoNet", this family is for MIPS based devices only.
+
 config MACH_JAZZ
 	bool "Jazz family of machines"
 	select ARC_MEMORY
@@ -453,6 +479,23 @@ config LANTIQ
 
 config MACH_LOONGSON32
 	bool "Loongson 32-bit family of machines"
+	select MACH_GENERIC_CORE
+	select USE_OF
+	select BUILTIN_DTB
+	select BOOT_ELF32
+	select CEVT_R4K
+	select CSRC_R4K
+	select COMMON_CLK
+	select DMA_NONCOHERENT
+	select GENERIC_IRQ_SHOW_LEVEL
+	select IRQ_MIPS_CPU
+	select LS1X_IRQ
+	select SYS_HAS_CPU_LOONGSON32
+	select SYS_HAS_EARLY_PRINTK
+	select USE_GENERIC_EARLY_PRINTK_8250
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_ZBOOT
 	help
 	  This enables support for the Loongson-1 family of machines.
@@ -535,6 +578,7 @@ config MIPS_MALTA
 	select MIPS_L1_CACHE_SHIFT_6
 	select MIPS_MSC
 	select PCI_GT64XXX_PCI0
+	select RTC_MC146818_LIB
 	select SMP_UP if SMP
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
@@ -614,6 +658,7 @@ config EYEQ
 	select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
 	select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
 	select USE_OF
+	select HOTPLUG_PARALLEL if HOTPLUG_CPU
 	help
 	  Select this to build a kernel supporting EyeQ SoC from Mobileye.
 
@@ -1017,6 +1062,7 @@ source "arch/mips/ath79/Kconfig"
 source "arch/mips/bcm47xx/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/bmips/Kconfig"
+source "arch/mips/econet/Kconfig"
 source "arch/mips/generic/Kconfig"
 source "arch/mips/ingenic/Kconfig"
 source "arch/mips/jazz/Kconfig"
@@ -1084,7 +1130,6 @@ config CSRC_IOASIC
 
 config CSRC_R4K
 	select CLOCKSOURCE_WATCHDOG if CPU_FREQ
-	select HAVE_UNSTABLE_SCHED_CLOCK if SMP && 64BIT
 	bool
 
 config CSRC_SB1250
@@ -1357,25 +1402,20 @@ config CPU_LOONGSON2F
 	  have a similar programming interface with FPGA northbridge used in
 	  Loongson2E.
 
-config CPU_LOONGSON1B
-	bool "Loongson 1B"
-	depends on SYS_HAS_CPU_LOONGSON1B
-	select CPU_LOONGSON32
-	select LEDS_GPIO_REGISTER
-	help
-	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
-	  Release 1 instruction set and part of the MIPS32 Release 2
-	  instruction set.
-
-config CPU_LOONGSON1C
-	bool "Loongson 1C"
-	depends on SYS_HAS_CPU_LOONGSON1C
-	select CPU_LOONGSON32
+config CPU_LOONGSON32
+	bool "Loongson 32-bit CPU"
+	depends on SYS_HAS_CPU_LOONGSON32
+	select CPU_MIPS32
+	select CPU_MIPSR2
+	select CPU_HAS_PREFETCH
+	select CPU_HAS_LOAD_STORE_LR
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_CPUFREQ
 	select LEDS_GPIO_REGISTER
 	help
-	  The Loongson 1C is a 32-bit SoC, which implements the MIPS32
-	  Release 1 instruction set and part of the MIPS32 Release 2
-	  instruction set.
+	  The Loongson GS232 microarchitecture implements the MIPS32 Release 1
+	  instruction set and part of the MIPS32 Release 2 instruction set.
 
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
@@ -1808,15 +1848,7 @@ config CPU_LOONGSON2EF
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
-
-config CPU_LOONGSON32
-	bool
-	select CPU_MIPS32
-	select CPU_MIPSR2
-	select CPU_HAS_PREFETCH
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select CPU_SUPPORTS_HIGHMEM
-	select CPU_SUPPORTS_CPUFREQ
+	select RTC_MC146818_LIB
 
 config CPU_BMIPS32_3300
 	select SMP_UP if SMP
@@ -1855,10 +1887,7 @@ config SYS_HAS_CPU_LOONGSON2F
 	select CPU_SUPPORTS_CPUFREQ
 	select CPU_SUPPORTS_ADDRWINCFG if 64BIT
 
-config SYS_HAS_CPU_LOONGSON1B
-	bool
-
-config SYS_HAS_CPU_LOONGSON1C
+config SYS_HAS_CPU_LOONGSON32
 	bool
 
 config SYS_HAS_CPU_MIPS32_R1
@@ -1999,7 +2028,6 @@ config CPU_MIPSR6
 	select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
 	select HAVE_ARCH_BITREVERSE
 	select MIPS_ASID_BITS_VARIABLE
-	select MIPS_CRC_SUPPORT
 	select MIPS_SPRAM
 
 config TARGET_ISA_REV
@@ -2194,7 +2222,7 @@ config MIPS_MT_SMP
 	select SMP
 	select SMP_UP
 	select SYS_SUPPORTS_SMP
-	select SYS_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_SMT
 	select MIPS_PERF_SHARED_TC_COUNTERS
 	help
 	  This is a kernel model which is known as SMVP. This is supported
@@ -2206,18 +2234,6 @@ config MIPS_MT_SMP
 config MIPS_MT
 	bool
 
-config SCHED_SMT
-	bool "SMT (multithreading) scheduler support"
-	depends on SYS_SUPPORTS_SCHED_SMT
-	default n
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with MIPS MT enabled cores at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SYS_SUPPORTS_SCHED_SMT
-	bool
-
 config SYS_SUPPORTS_MULTITHREADING
 	bool
 
@@ -2285,10 +2301,11 @@ config MIPS_CPS
 	select MIPS_CM
 	select MIPS_CPS_PM if HOTPLUG_CPU
 	select SMP
+	select HOTPLUG_SMT if HOTPLUG_PARALLEL
 	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
 	select SYS_SUPPORTS_HOTPLUG_CPU
-	select SYS_SUPPORTS_SCHED_SMT if CPU_MIPSR6
+	select ARCH_SUPPORTS_SCHED_SMT if CPU_MIPSR6
 	select SYS_SUPPORTS_SMP
 	select WEAK_ORDERING
 	select GENERIC_IRQ_MIGRATION if HOTPLUG_CPU
@@ -2475,9 +2492,6 @@ config MIPS_ASID_BITS
 config MIPS_ASID_BITS_VARIABLE
 	bool
 
-config MIPS_CRC_SUPPORT
-	bool
-
 # R4600 erratum.  Due to the lack of errata information the exact
 # technical details aren't known.  I've experimentally found that disabling
 # interrupts during indexed I-cache flushes seems to be sufficient to deal
@@ -2619,6 +2633,7 @@ config RELOCATABLE
 		   CPU_MIPS32_R6 || CPU_MIPS64_R6 || \
 		   CPU_P5600 || CAVIUM_OCTEON_SOC || \
 		   CPU_LOONGSON64
+	select ARCH_VMLINUX_NEEDS_RELOCS
 	help
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
@@ -2971,8 +2986,8 @@ choice
 	prompt "Kernel command line type"
 	depends on !CMDLINE_OVERRIDE
 	default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
-					 !MACH_LOONGSON64 && !MIPS_MALTA && \
-					 !CAVIUM_OCTEON_SOC
+					 !MACH_LOONGSON64 && !MACH_LOONGSON32 && \
+					 !MIPS_MALTA && !CAVIUM_OCTEON_SOC
 	default MIPS_CMDLINE_FROM_BOOTLOADER
 
 	config MIPS_CMDLINE_FROM_DTB
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 5785a3d5ccfb..d9057e29bc62 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -100,10 +100,6 @@ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
 KBUILD_AFLAGS_MODULE		+= -mlong-calls
 KBUILD_CFLAGS_MODULE		+= -mlong-calls
 
-ifeq ($(CONFIG_RELOCATABLE),y)
-LDFLAGS_vmlinux			+= --emit-relocs
-endif
-
 cflags-y += -ffreestanding
 
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -EB
@@ -423,9 +419,6 @@ endif
 
 CLEAN_FILES += vmlinux.32 vmlinux.64
 
-# device-trees
-core-y += arch/mips/boot/dts/
-
 archprepare:
 ifdef CONFIG_MIPS32_N32
 	@$(kecho) '  Checking missing-syscalls for N32'
diff --git a/arch/mips/Makefile.postlink b/arch/mips/Makefile.postlink
index 6cfdc149d3bc..ea0add7d56b2 100644
--- a/arch/mips/Makefile.postlink
+++ b/arch/mips/Makefile.postlink
@@ -22,7 +22,7 @@ quiet_cmd_relocs = RELOCS  $@
 
 # `@true` prevents complaint when there is nothing to be done
 
-vmlinux: FORCE
+vmlinux vmlinux.unstripped: FORCE
 	@true
 ifeq ($(CONFIG_CPU_LOONGSON3_WORKAROUNDS),y)
 	$(call if_changed,ls3_llsc)
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index 68ea57511629..cb6be58808a0 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -9,10 +9,8 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
 #include <linux/gpio/machine.h>
-#include <linux/gpio_keys.h>
+#include <linux/gpio/property.h>
 #include <linux/input.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
@@ -80,64 +78,134 @@ void __init board_setup(void)
 
 /******************************************************************************/
 
-static struct gpio_keys_button mtx1_gpio_button[] = {
-	{
-		.gpio = 207,
-		.code = BTN_0,
-		.desc = "System button",
-	}
+static const struct software_node mtx1_gpiochip_node = {
+	.name = "alchemy-gpio2",
 };
 
-static struct gpio_keys_platform_data mtx1_buttons_data = {
-	.buttons = mtx1_gpio_button,
-	.nbuttons = ARRAY_SIZE(mtx1_gpio_button),
+static const struct software_node mtx1_gpio_keys_node = {
+	.name = "mtx1-gpio-keys",
 };
 
-static struct platform_device mtx1_button = {
-	.name = "gpio-keys",
-	.id = -1,
-	.dev = {
-		.platform_data = &mtx1_buttons_data,
-	}
+static const struct property_entry mtx1_button_props[] = {
+	PROPERTY_ENTRY_U32("linux,code", BTN_0),
+	PROPERTY_ENTRY_GPIO("gpios", &mtx1_gpiochip_node, 7, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_STRING("label", "System button"),
+	{ }
 };
 
-static struct gpiod_lookup_table mtx1_wdt_gpio_table = {
-	.dev_id = "mtx1-wdt.0",
-	.table = {
-		/* Global number 215 is offset 15 on Alchemy GPIO 2 */
-		GPIO_LOOKUP("alchemy-gpio2", 15, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct software_node mtx1_button_node = {
+	.parent = &mtx1_gpio_keys_node,
+	.properties = mtx1_button_props,
+};
+
+static const struct software_node *mtx1_gpio_keys_swnodes[] __initconst = {
+	&mtx1_gpio_keys_node,
+	&mtx1_button_node,
+	NULL
 };
 
-static struct platform_device mtx1_wdt = {
+static void __init mtx1_keys_init(void)
+{
+	struct platform_device_info keys_info = {
+		.name	= "gpio-keys",
+		.id	= PLATFORM_DEVID_NONE,
+	};
+	struct platform_device *pd;
+	int err;
+
+	err = software_node_register_node_group(mtx1_gpio_keys_swnodes);
+	if (err) {
+		pr_err("failed to register gpio-keys software nodes: %d\n", err);
+		return;
+	}
+
+	keys_info.fwnode = software_node_fwnode(&mtx1_gpio_keys_node);
+
+	pd = platform_device_register_full(&keys_info);
+	err = PTR_ERR_OR_ZERO(pd);
+	if (err)
+		pr_err("failed to create gpio-keys device: %d\n", err);
+}
+
+/* Global number 215 is offset 15 on Alchemy GPIO 2 */
+static const struct property_entry mtx1_wdt_props[] = {
+	PROPERTY_ENTRY_GPIO("gpios", &mtx1_gpiochip_node, 15, GPIO_ACTIVE_HIGH),
+	{ }
+};
+
+static struct platform_device_info mtx1_wdt_info __initconst = {
 	.name = "mtx1-wdt",
 	.id = 0,
+	.properties = mtx1_wdt_props,
 };
 
-static const struct gpio_led default_leds[] = {
-	{
-		.name	= "mtx1:green",
-		.gpio = 211,
-	}, {
-		.name = "mtx1:red",
-		.gpio = 212,
-	},
+static void __init mtx1_wdt_init(void)
+{
+	struct platform_device *pd;
+	int err;
+
+	pd = platform_device_register_full(&mtx1_wdt_info);
+	err = PTR_ERR_OR_ZERO(pd);
+	if (err)
+		pr_err("failed to create gpio-keys device: %d\n", err);
+}
+
+static const struct software_node mtx1_gpio_leds_node = {
+	.name = "mtx1-leds",
 };
 
-static struct gpio_led_platform_data mtx1_led_data = {
-	.num_leds = ARRAY_SIZE(default_leds),
-	.leds = default_leds,
+static const struct property_entry mtx1_green_led_props[] = {
+	PROPERTY_ENTRY_GPIO("gpios", &mtx1_gpiochip_node, 11, GPIO_ACTIVE_HIGH),
+	{ }
 };
 
-static struct platform_device mtx1_gpio_leds = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &mtx1_led_data,
-	}
+static const struct software_node mtx1_green_led_node = {
+	.name = "mtx1:green",
+	.parent = &mtx1_gpio_leds_node,
+	.properties = mtx1_green_led_props,
 };
 
+static const struct property_entry mtx1_red_led_props[] = {
+	PROPERTY_ENTRY_GPIO("gpios", &mtx1_gpiochip_node, 12, GPIO_ACTIVE_HIGH),
+	{ }
+};
+
+static const struct software_node mtx1_red_led_node = {
+	.name = "mtx1:red",
+	.parent = &mtx1_gpio_leds_node,
+	.properties = mtx1_red_led_props,
+};
+
+static const struct software_node *mtx1_gpio_leds_swnodes[] = {
+	&mtx1_gpio_leds_node,
+	&mtx1_green_led_node,
+	&mtx1_red_led_node,
+	NULL
+};
+
+static void __init mtx1_leds_init(void)
+{
+	struct platform_device_info led_info = {
+		.name	= "leds-gpio",
+		.id	= PLATFORM_DEVID_NONE,
+	};
+	struct platform_device *led_dev;
+	int err;
+
+	err = software_node_register_node_group(mtx1_gpio_leds_swnodes);
+	if (err) {
+		pr_err("failed to register LED software nodes: %d\n", err);
+		return;
+	}
+
+	led_info.fwnode = software_node_fwnode(&mtx1_gpio_leds_node);
+
+	led_dev = platform_device_register_full(&led_info);
+	err = PTR_ERR_OR_ZERO(led_dev);
+	if (err)
+		pr_err("failed to create LED device: %d\n", err);
+}
+
 static struct mtd_partition mtx1_mtd_partitions[] = {
 	{
 		.name	= "filesystem",
@@ -247,9 +315,6 @@ static struct platform_device mtx1_pci_host = {
 
 static struct platform_device *mtx1_devs[] __initdata = {
 	&mtx1_pci_host,
-	&mtx1_gpio_leds,
-	&mtx1_wdt,
-	&mtx1_button,
 	&mtx1_mtd,
 };
 
@@ -270,16 +335,18 @@ static int __init mtx1_register_devices(void)
 
 	au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
 
-	rc = gpio_request(mtx1_gpio_button[0].gpio,
-					mtx1_gpio_button[0].desc);
-	if (rc < 0) {
-		printk(KERN_INFO "mtx1: failed to request %d\n",
-					mtx1_gpio_button[0].gpio);
-		goto out;
-	}
-	gpio_direction_input(mtx1_gpio_button[0].gpio);
-out:
-	gpiod_add_lookup_table(&mtx1_wdt_gpio_table);
-	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
+	rc = software_node_register(&mtx1_gpiochip_node);
+	if (rc)
+		return rc;
+
+	rc = platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
+	if (rc)
+		return rc;
+
+	mtx1_leds_init();
+	mtx1_wdt_init();
+	mtx1_keys_init();
+
+	return 0;
 }
 arch_initcall(mtx1_register_devices);
diff --git a/arch/mips/alchemy/common/clock.c b/arch/mips/alchemy/common/clock.c
index 6c8996e20a7d..551b0d21d9dc 100644
--- a/arch/mips/alchemy/common/clock.c
+++ b/arch/mips/alchemy/common/clock.c
@@ -211,30 +211,34 @@ static int alchemy_clk_aux_setr(struct clk_hw *hw,
 	return 0;
 }
 
-static long alchemy_clk_aux_roundr(struct clk_hw *hw,
-					    unsigned long rate,
-					    unsigned long *parent_rate)
+static int alchemy_clk_aux_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
 {
 	struct alchemy_auxpll_clk *a = to_auxpll_clk(hw);
 	unsigned long mult;
 
-	if (!rate || !*parent_rate)
+	if (!req->rate || !req->best_parent_rate) {
+		req->rate = 0;
+
 		return 0;
+	}
 
-	mult = rate / (*parent_rate);
+	mult = req->rate / req->best_parent_rate;
 
 	if (mult && (mult < 7))
 		mult = 7;
 	if (mult > a->maxmult)
 		mult = a->maxmult;
 
-	return (*parent_rate) * mult;
+	req->rate = req->best_parent_rate * mult;
+
+	return 0;
 }
 
 static const struct clk_ops alchemy_clkops_aux = {
 	.recalc_rate	= alchemy_clk_aux_recalc,
 	.set_rate	= alchemy_clk_aux_setr,
-	.round_rate	= alchemy_clk_aux_roundr,
+	.determine_rate = alchemy_clk_aux_determine_rate,
 };
 
 static struct clk __init *alchemy_clk_setup_aux(const char *parent_name,
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 6a3c890f7bbf..6c2c2010bbae 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -982,7 +982,7 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 
 static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
 
-static int alchemy_dbdma_suspend(void)
+static int alchemy_dbdma_suspend(void *data)
 {
 	int i;
 	void __iomem *addr;
@@ -1019,7 +1019,7 @@ static int alchemy_dbdma_suspend(void)
 	return 0;
 }
 
-static void alchemy_dbdma_resume(void)
+static void alchemy_dbdma_resume(void *data)
 {
 	int i;
 	void __iomem *addr;
@@ -1044,11 +1044,15 @@ static void alchemy_dbdma_resume(void)
 	}
 }
 
-static struct syscore_ops alchemy_dbdma_syscore_ops = {
+static const struct syscore_ops alchemy_dbdma_syscore_ops = {
 	.suspend	= alchemy_dbdma_suspend,
 	.resume		= alchemy_dbdma_resume,
 };
 
+static struct syscore alchemy_dbdma_syscore = {
+	.ops = &alchemy_dbdma_syscore_ops,
+};
+
 static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
 {
 	int ret;
@@ -1071,7 +1075,7 @@ static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
 		printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
 	else {
 		dbdma_initialized = 1;
-		register_syscore_ops(&alchemy_dbdma_syscore_ops);
+		register_syscore(&alchemy_dbdma_syscore);
 	}
 
 	return ret;
diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c
index 1b16daaa86ae..e79e26ffac99 100644
--- a/arch/mips/alchemy/common/gpiolib.c
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -40,9 +40,11 @@ static int gpio2_get(struct gpio_chip *chip, unsigned offset)
 	return !!alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
 }
 
-static void gpio2_set(struct gpio_chip *chip, unsigned offset, int value)
+static int gpio2_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	alchemy_gpio2_set_value(offset + ALCHEMY_GPIO2_BASE, value);
+
+	return 0;
 }
 
 static int gpio2_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -68,10 +70,12 @@ static int gpio1_get(struct gpio_chip *chip, unsigned offset)
 	return !!alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE);
 }
 
-static void gpio1_set(struct gpio_chip *chip,
+static int gpio1_set(struct gpio_chip *chip,
 				unsigned offset, int value)
 {
 	alchemy_gpio1_set_value(offset + ALCHEMY_GPIO1_BASE, value);
+
+	return 0;
 }
 
 static int gpio1_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -119,9 +123,11 @@ static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off)
 	return !!au1300_gpio_get_value(off + AU1300_GPIO_BASE);
 }
 
-static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
+static int alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
 {
 	au1300_gpio_set_value(off + AU1300_GPIO_BASE, v);
+
+	return 0;
 }
 
 static int alchemy_gpic_dir_input(struct gpio_chip *chip, unsigned int off)
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index da9f9220048f..2403afcd2fb9 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -758,7 +758,7 @@ static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
 	wmb();
 }
 
-static int alchemy_ic_suspend(void)
+static int alchemy_ic_suspend(void *data)
 {
 	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
 			       alchemy_gpic_pmdata);
@@ -767,7 +767,7 @@ static int alchemy_ic_suspend(void)
 	return 0;
 }
 
-static void alchemy_ic_resume(void)
+static void alchemy_ic_resume(void *data)
 {
 	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
 			      &alchemy_gpic_pmdata[7]);
@@ -775,7 +775,7 @@ static void alchemy_ic_resume(void)
 			      alchemy_gpic_pmdata);
 }
 
-static int alchemy_gpic_suspend(void)
+static int alchemy_gpic_suspend(void *data)
 {
 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
 	int i;
@@ -806,7 +806,7 @@ static int alchemy_gpic_suspend(void)
 	return 0;
 }
 
-static void alchemy_gpic_resume(void)
+static void alchemy_gpic_resume(void *data)
 {
 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
 	int i;
@@ -837,16 +837,24 @@ static void alchemy_gpic_resume(void)
 	wmb();
 }
 
-static struct syscore_ops alchemy_ic_pmops = {
+static const struct syscore_ops alchemy_ic_pmops = {
 	.suspend	= alchemy_ic_suspend,
 	.resume		= alchemy_ic_resume,
 };
 
-static struct syscore_ops alchemy_gpic_pmops = {
+static struct syscore alchemy_ic_pm = {
+	.ops = &alchemy_ic_pmops,
+};
+
+static const struct syscore_ops alchemy_gpic_pmops = {
 	.suspend	= alchemy_gpic_suspend,
 	.resume		= alchemy_gpic_resume,
 };
 
+static struct syscore alchemy_gpic_pm = {
+	.ops = &alchemy_gpic_pmops,
+};
+
 /******************************************************************************/
 
 /* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */
@@ -880,7 +888,7 @@ static void __init au1000_init_irq(struct alchemy_irqmap *map)
 
 	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
 	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
-	register_syscore_ops(&alchemy_ic_pmops);
+	register_syscore(&alchemy_ic_pm);
 	mips_cpu_irq_init();
 
 	/* register all 64 possible IC0+IC1 irq sources as type "none".
@@ -925,7 +933,7 @@ static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints)
 	int i;
 	void __iomem *bank_base;
 
-	register_syscore_ops(&alchemy_gpic_pmops);
+	register_syscore(&alchemy_gpic_pm);
 	mips_cpu_irq_init();
 
 	/* disable & ack all possible interrupt sources */
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index a7a6d31a7a41..c35b4f809d51 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -94,12 +94,13 @@ phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
 	return phys_addr;
 }
 
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr,
-		unsigned long pfn, unsigned long size, pgprot_t prot)
+static inline unsigned long io_remap_pfn_range_pfn(unsigned long pfn,
+		unsigned long size)
 {
 	phys_addr_t phys_addr = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
 
-	return remap_pfn_range(vma, vaddr, phys_addr >> PAGE_SHIFT, size, prot);
+	return phys_addr >> PAGE_SHIFT;
 }
-EXPORT_SYMBOL(io_remap_pfn_range);
+EXPORT_SYMBOL(io_remap_pfn_range_pfn);
+
 #endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */
diff --git a/arch/mips/alchemy/common/usb.c b/arch/mips/alchemy/common/usb.c
index 5d618547ebf0..a55f32bf517c 100644
--- a/arch/mips/alchemy/common/usb.c
+++ b/arch/mips/alchemy/common/usb.c
@@ -580,22 +580,26 @@ static void alchemy_usb_pm(int susp)
 	}
 }
 
-static int alchemy_usb_suspend(void)
+static int alchemy_usb_suspend(void *data)
 {
 	alchemy_usb_pm(1);
 	return 0;
 }
 
-static void alchemy_usb_resume(void)
+static void alchemy_usb_resume(void *data)
 {
 	alchemy_usb_pm(0);
 }
 
-static struct syscore_ops alchemy_usb_pm_ops = {
+static const struct syscore_ops alchemy_usb_pm_syscore_ops = {
 	.suspend	= alchemy_usb_suspend,
 	.resume		= alchemy_usb_resume,
 };
 
+static struct syscore alchemy_usb_pm_syscore = {
+	.ops = &alchemy_usb_pm_syscore_ops,
+};
+
 static int __init alchemy_usb_init(void)
 {
 	int ret = 0;
@@ -620,7 +624,7 @@ static int __init alchemy_usb_init(void)
 	}
 
 	if (!ret)
-		register_syscore_ops(&alchemy_usb_pm_ops);
+		register_syscore(&alchemy_usb_pm_syscore);
 
 	return ret;
 }
diff --git a/arch/mips/ath25/ar2315.c b/arch/mips/ath25/ar2315.c
index 8ccf167c167e..e8c38aaf46a2 100644
--- a/arch/mips/ath25/ar2315.c
+++ b/arch/mips/ath25/ar2315.c
@@ -149,8 +149,8 @@ void __init ar2315_arch_init_irq(void)
 
 	ath25_irq_dispatch = ar2315_irq_dispatch;
 
-	domain = irq_domain_add_linear(NULL, AR2315_MISC_IRQ_COUNT,
-				       &ar2315_misc_irq_domain_ops, NULL);
+	domain = irq_domain_create_linear(NULL, AR2315_MISC_IRQ_COUNT,
+					  &ar2315_misc_irq_domain_ops, NULL);
 	if (!domain)
 		panic("Failed to add IRQ domain");
 
diff --git a/arch/mips/ath25/ar5312.c b/arch/mips/ath25/ar5312.c
index cfa103518113..4a1d874be766 100644
--- a/arch/mips/ath25/ar5312.c
+++ b/arch/mips/ath25/ar5312.c
@@ -143,8 +143,8 @@ void __init ar5312_arch_init_irq(void)
 
 	ath25_irq_dispatch = ar5312_irq_dispatch;
 
-	domain = irq_domain_add_linear(NULL, AR5312_MISC_IRQ_COUNT,
-				       &ar5312_misc_irq_domain_ops, NULL);
+	domain = irq_domain_create_linear(NULL, AR5312_MISC_IRQ_COUNT,
+					  &ar5312_misc_irq_domain_ops, NULL);
 	if (!domain)
 		panic("Failed to add IRQ domain");
 
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 247be207f293..38ed61b4bd96 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -256,12 +256,6 @@ static int __init bcm47xx_cpu_fixes(void)
 }
 arch_initcall(bcm47xx_cpu_fixes);
 
-static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = {
-	.link	= 1,
-	.speed	= SPEED_100,
-	.duplex	= DUPLEX_FULL,
-};
-
 static int __init bcm47xx_register_bus_complete(void)
 {
 	switch (bcm47xx_bus_type) {
@@ -282,7 +276,6 @@ static int __init bcm47xx_register_bus_complete(void)
 	bcm47xx_leds_register();
 	bcm47xx_workarounds();
 
-	fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
 	return 0;
 }
 device_initcall(bcm47xx_register_bus_complete);
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 9cc8fbf218a5..c5617b889b1c 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -764,7 +764,7 @@ void __init board_prom_init(void)
 			snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
 		}
 	} else {
-		strcpy(cfe_version, "unknown");
+		strscpy(cfe_version, "unknown");
 	}
 	pr_info("CFE version: %s\n", cfe_version);
 
diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c
index 5c4a233db55f..ff45a6989c3a 100644
--- a/arch/mips/bcm63xx/gpio.c
+++ b/arch/mips/bcm63xx/gpio.c
@@ -35,8 +35,7 @@ static void bcm63xx_gpio_out_low_reg_init(void)
 static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
 static u32 gpio_out_low, gpio_out_high;
 
-static void bcm63xx_gpio_set(struct gpio_chip *chip,
-			     unsigned gpio, int val)
+static int bcm63xx_gpio_set(struct gpio_chip *chip, unsigned int gpio, int val)
 {
 	u32 reg;
 	u32 mask;
@@ -62,6 +61,8 @@ static void bcm63xx_gpio_set(struct gpio_chip *chip,
 		*v &= ~mask;
 	bcm_gpio_writel(*v, reg);
 	spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+
+	return 0;
 }
 
 static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index 196c44fa72d9..8473c4671702 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -54,10 +54,10 @@ UIMAGE_ENTRYADDR = $(VMLINUX_ENTRY_ADDRESS)
 # Compressed vmlinux images
 #
 
-extra-y += vmlinux.bin.bz2
-extra-y += vmlinux.bin.gz
-extra-y += vmlinux.bin.lzma
-extra-y += vmlinux.bin.lzo
+targets += vmlinux.bin.bz2
+targets += vmlinux.bin.gz
+targets += vmlinux.bin.lzma
+targets += vmlinux.bin.lzo
 
 $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,bzip2)
diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c
index db618e72a0c4..529e77a6487c 100644
--- a/arch/mips/boot/compressed/uart-16550.c
+++ b/arch/mips/boot/compressed/uart-16550.c
@@ -20,6 +20,11 @@
 #define PORT(offset) (CKSEG1ADDR(INGENIC_UART_BASE_ADDR) + (4 * offset))
 #endif
 
+#ifdef CONFIG_ECONET
+#define EN75_UART_BASE	0x1fbf0003
+#define PORT(offset)	(CKSEG1ADDR(EN75_UART_BASE) + (4 * (offset)))
+#endif
+
 #ifndef IOTYPE
 #define IOTYPE char
 #endif
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index e2476b12bb0c..36c5e4c6e640 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,20 +1,17 @@
 # SPDX-License-Identifier: GPL-2.0
-subdir-$(CONFIG_BMIPS_GENERIC)		+= brcm
-subdir-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon
-subdir-$(CONFIG_EYEQ)			+= mobileye
-subdir-$(CONFIG_FIT_IMAGE_FDT_MARDUK)   += img
-subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= img
-subdir-$(CONFIG_MACH_INGENIC)		+= ingenic
-subdir-$(CONFIG_LANTIQ)			+= lantiq
-subdir-$(CONFIG_MACH_LOONGSON64)	+= loongson
-subdir-$(CONFIG_SOC_VCOREIII)		+= mscc
-subdir-$(CONFIG_MIPS_MALTA)		+= mti
-subdir-$(CONFIG_LEGACY_BOARD_SEAD3)	+= mti
-subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= ni
-subdir-$(CONFIG_MACH_PIC32)		+= pic32
-subdir-$(CONFIG_ATH79)			+= qca
-subdir-$(CONFIG_RALINK)			+= ralink
-subdir-$(CONFIG_MACH_REALTEK_RTL)	+= realtek
-subdir-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= xilfpga
-
-obj-$(CONFIG_BUILTIN_DTB)	:= $(addsuffix /, $(subdir-y))
+subdir-y	+= brcm
+subdir-y	+= cavium-octeon
+subdir-y	+= econet
+subdir-y	+= mobileye
+subdir-y	+= img
+subdir-y	+= ingenic
+subdir-y	+= lantiq
+subdir-y	+= loongson
+subdir-y	+= mscc
+subdir-y	+= mti
+subdir-y	+= ni
+subdir-y	+= pic32
+subdir-y	+= qca
+subdir-y	+= ralink
+subdir-y	+= realtek
+subdir-y	+= xilfpga
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
index d85f446cc0ce..1798209697c6 100644
--- a/arch/mips/boot/dts/brcm/Makefile
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -33,5 +33,3 @@ dtb-$(CONFIG_DT_NONE) += \
 	bcm97420c.dtb \
 	bcm97425svmb.dtb \
 	bcm97435svmb.dtb
-
-obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index 2afa0dada575..9d6f97e02ff9 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -531,7 +531,8 @@
 			};
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-a.0.0",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x300>;
 			};
 
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index a57cacea91cf..a7f60f059e50 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -450,7 +450,8 @@
 			};
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-a.0.0",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x300>;
 			};
 
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index 728b9e9f84b8..2d483cbf254f 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -446,7 +446,8 @@
 			};
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-a.0.0",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x300>;
 			};
 
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index 62588c53d356..c3bb020ff2b5 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -542,7 +542,8 @@
 			};
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-a.0.0",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x300>;
 			};
 
@@ -569,7 +570,8 @@
 			};
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-a.0.0",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x300>;
 			};
 
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index cfdf9804e126..60cfa4074cce 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -558,7 +558,8 @@
 			};
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-a.0.0",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x300>;
 			};
 
@@ -585,7 +586,8 @@
 			};
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-a.0.0",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x300>;
 			};
 
diff --git a/arch/mips/boot/dts/cavium-octeon/Makefile b/arch/mips/boot/dts/cavium-octeon/Makefile
index 17aef35f311b..48085bca666c 100644
--- a/arch/mips/boot/dts/cavium-octeon/Makefile
+++ b/arch/mips/boot/dts/cavium-octeon/Makefile
@@ -1,4 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_CAVIUM_OCTEON_SOC)	+= octeon_3xxx.dtb octeon_68xx.dtb
-
-obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/econet/Makefile b/arch/mips/boot/dts/econet/Makefile
new file mode 100644
index 000000000000..b467d5624e39
--- /dev/null
+++ b/arch/mips/boot/dts/econet/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DTB_ECONET_SMARTFIBER_XP8421_B)	+= en751221_smartfiber_xp8421-b.dtb
diff --git a/arch/mips/boot/dts/econet/en751221.dtsi b/arch/mips/boot/dts/econet/en751221.dtsi
new file mode 100644
index 000000000000..2abeef5b744a
--- /dev/null
+++ b/arch/mips/boot/dts/econet/en751221.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/ {
+	compatible = "econet,en751221";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	hpt_clock: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;  /* 200 MHz */
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips34Kc";
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+
+	intc: interrupt-controller@1fb40000 {
+		compatible = "econet,en751221-intc";
+		reg = <0x1fb40000 0x100>;
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		econet,shadow-interrupts = <7 2>, <8 3>, <13 12>, <30 29>;
+	};
+
+	uart: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupt-parent = <&intc>;
+		interrupts = <0>;
+		/*
+		 * Conversion of baud rate to clock frequency requires a
+		 * computation that is not in the ns16550 driver, so this
+		 * uart is fixed at 115200 baud.
+		 */
+		clock-frequency = <1843200>;
+	};
+
+	timer_hpt: timer@1fbf0400 {
+		compatible = "econet,en751221-timer";
+		reg = <0x1fbf0400 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <30>;
+		clocks = <&hpt_clock>;
+	};
+};
diff --git a/arch/mips/boot/dts/econet/en751221_smartfiber_xp8421-b.dts b/arch/mips/boot/dts/econet/en751221_smartfiber_xp8421-b.dts
new file mode 100644
index 000000000000..8223c5bce67f
--- /dev/null
+++ b/arch/mips/boot/dts/econet/en751221_smartfiber_xp8421-b.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+#include "en751221.dtsi"
+
+/ {
+	model = "SmartFiber XP8421-B";
+	compatible = "smartfiber,xp8421-b", "econet,en751221";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x1c000000>;
+	};
+
+	chosen {
+		stdout-path = "/serial@1fbf0000:115200";
+		linux,usable-memory-range = <0x00020000 0x1bfe0000>;
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
index 54aa0c4e6091..6e674f1a3aa3 100644
--- a/arch/mips/boot/dts/ingenic/Makefile
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -5,5 +5,3 @@ dtb-$(CONFIG_JZ4770_GCW0)	+= gcw0.dtb
 dtb-$(CONFIG_JZ4780_CI20)	+= ci20.dtb
 dtb-$(CONFIG_X1000_CU1000_NEO)	+= cu1000-neo.dtb
 dtb-$(CONFIG_X1830_CU1830_NEO)	+= cu1830-neo.dtb
-
-obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
index 5d33f26fd28c..8455778928b7 100644
--- a/arch/mips/boot/dts/ingenic/gcw0.dts
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -91,7 +91,7 @@
 			"MIC1N", "Built-in Mic";
 		simple-audio-card,pin-switches = "Speaker", "Headphones";
 
-		simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-det-gpios = <&gpf 21 GPIO_ACTIVE_LOW>;
 		simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
 
 		simple-audio-card,bitclock-master = <&dai_codec>;
diff --git a/arch/mips/boot/dts/ingenic/rs90.dts b/arch/mips/boot/dts/ingenic/rs90.dts
index e8df70dd42bf..6d2c8aea5f49 100644
--- a/arch/mips/boot/dts/ingenic/rs90.dts
+++ b/arch/mips/boot/dts/ingenic/rs90.dts
@@ -148,7 +148,7 @@
 			"Speaker", "OUTR";
 		simple-audio-card,pin-switches = "Speaker";
 
-		simple-audio-card,hp-det-gpio = <&gpd 16 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-det-gpios = <&gpd 16 GPIO_ACTIVE_LOW>;
 		simple-audio-card,aux-devs = <&amp>;
 
 		simple-audio-card,bitclock-master = <&dai_codec>;
diff --git a/arch/mips/boot/dts/lantiq/Makefile b/arch/mips/boot/dts/lantiq/Makefile
index ae6e3e21ebeb..d8531b4653c0 100644
--- a/arch/mips/boot/dts/lantiq/Makefile
+++ b/arch/mips/boot/dts/lantiq/Makefile
@@ -1,4 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_DT_EASY50712)	+= danube_easy50712.dtb
-
-obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
index 7a7ba66aa534..650400bd5725 100644
--- a/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -5,8 +5,12 @@
 	compatible = "lantiq,xway", "lantiq,danube";
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu@0 {
 			compatible = "mips,mips24Kc";
+			reg = <0>;
 		};
 	};
 
@@ -100,6 +104,8 @@
 				  0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
 			reg = <0x7000000 0x8000		/* config space */
 				0xe105400 0x400>;	/* pci bridge */
+
+			device_type = "pci";
 		};
 	};
 };
diff --git a/arch/mips/boot/dts/lantiq/danube_easy50712.dts b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
index 1ce20b7d05cb..c9f7886f57b8 100644
--- a/arch/mips/boot/dts/lantiq/danube_easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
@@ -4,6 +4,8 @@
 /include/ "danube.dtsi"
 
 / {
+	model = "Intel EASY50712";
+
 	chosen {
 		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
 	};
@@ -82,16 +84,19 @@
 			};
 		};
 
-		etop@e180000 {
+		ethernet@e180000 {
 			compatible = "lantiq,etop-xway";
 			reg = <0xe180000 0x40000>;
 			interrupt-parent = <&icu0>;
 			interrupts = <73 78>;
+			interrupt-names = "tx", "rx";
 			phy-mode = "rmii";
 			mac-address = [ 00 11 22 33 44 55 ];
+			lantiq,rx-burst-length = <4>;
+			lantiq,tx-burst-length = <4>;
 		};
 
-		stp0: stp@e100bb0 {
+		stp0: gpio@e100bb0 {
 			#gpio-cells = <2>;
 			compatible = "lantiq,gpio-stp-xway";
 			gpio-controller;
diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
index 5c6433e441ee..8ee12504d353 100644
--- a/arch/mips/boot/dts/loongson/Makefile
+++ b/arch/mips/boot/dts/loongson/Makefile
@@ -1,4 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
+
+ifneq ($(CONFIG_BUILTIN_DTB_NAME),)
+dtb-y	:= $(addsuffix .dtb, $(CONFIG_BUILTIN_DTB_NAME))
+else
 dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64_2core_2k1000.dtb
 dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_4core_ls7a.dtb
 dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_4core_rs780e.dtb
@@ -6,4 +10,8 @@ dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_8core_rs780e.dtb
 dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64g_4core_ls7a.dtb
 dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64v_4core_virtio.dtb
 
-obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
+dtb-$(CONFIG_MACH_LOONGSON32)	+= cq-t300b.dtb
+dtb-$(CONFIG_MACH_LOONGSON32)	+= ls1b-demo.dtb
+dtb-$(CONFIG_MACH_LOONGSON32)	+= lsgz_1b_dev.dtb
+dtb-$(CONFIG_MACH_LOONGSON32)	+= smartloong-1c.dtb
+endif
diff --git a/arch/mips/boot/dts/loongson/cq-t300b.dts b/arch/mips/boot/dts/loongson/cq-t300b.dts
new file mode 100644
index 000000000000..5244fab2496d
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/cq-t300b.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "loongson1c.dtsi"
+
+/ {
+	compatible = "loongson,cq-t300b", "loongson,ls1c";
+	model = "CQ-T300B Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "led0";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+};
+
+&xtal {
+	clock-frequency = <24000000>;
+};
+
+&emac {
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@13 {
+			reg = <0x13>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x1000000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/loongson/loongson1.dtsi b/arch/mips/boot/dts/loongson/loongson1.dtsi
new file mode 100644
index 000000000000..5ba5a5d131ba
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson1.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/loongson,ls1x-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	xtal: clock {
+		compatible = "fixed-clock";
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			reg = <0>;
+			device_type = "cpu";
+			clocks = <&clkc LS1X_CLKID_CPU>;
+			#clock-cells = <1>;
+		};
+	};
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <0>;
+	};
+
+	soc: bus@1fd00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1fd00000 0x130000>;
+
+		intc0: interrupt-controller@1040 {
+			compatible = "loongson,ls1x-intc";
+			reg = <0x1040 0x18>;
+			interrupt-controller;
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		intc1: interrupt-controller@1058 {
+			compatible = "loongson,ls1x-intc";
+			reg = <0x1058 0x18>;
+			interrupt-controller;
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <3>;
+			#interrupt-cells = <2>;
+		};
+
+		intc2: interrupt-controller@1070 {
+			compatible = "loongson,ls1x-intc";
+			reg = <0x1070 0x18>;
+			interrupt-controller;
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <4>;
+			#interrupt-cells = <2>;
+		};
+
+		intc3: interrupt-controller@1088 {
+			compatible = "loongson,ls1x-intc";
+			reg = <0x1088 0x18>;
+			interrupt-controller;
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <5>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio0: gpio@10c0 {
+			compatible = "loongson,ls1x-gpio";
+			reg = <0x10c0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio1: gpio@10c4 {
+			compatible = "loongson,ls1x-gpio";
+			reg = <0x10c4 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	apb: bus@1fe40000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1fe40000 0xc0000>;
+
+		uart0: serial@0 {
+			compatible = "ns16550a";
+			reg = <0x0 0x8>;
+			clocks = <&clkc LS1X_CLKID_APB>;
+			interrupt-parent = <&intc0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@4000 {
+			compatible = "ns16550a";
+			reg = <0x4000 0x8>;
+			clocks = <&clkc LS1X_CLKID_APB>;
+			interrupt-parent = <&intc0>;
+			status = "disabled";
+		};
+
+		uart2: serial@8000 {
+			compatible = "ns16550a";
+			reg = <0x8000 0x8>;
+			clocks = <&clkc LS1X_CLKID_APB>;
+			interrupt-parent = <&intc0>;
+			status = "disabled";
+		};
+
+		uart3: serial@c000 {
+			compatible = "ns16550a";
+			reg = <0xc000 0x8>;
+			clocks = <&clkc LS1X_CLKID_APB>;
+			interrupt-parent = <&intc0>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/loongson/loongson1b.dtsi b/arch/mips/boot/dts/loongson/loongson1b.dtsi
new file mode 100644
index 000000000000..776d272b0f43
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson1b.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+#include "loongson1.dtsi"
+
+/ {
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-44000000 {
+			opp-hz = /bits/ 64 <44000000>;
+		};
+		opp-47142000 {
+			opp-hz = /bits/ 64 <47142000>;
+		};
+		opp-50769000 {
+			opp-hz = /bits/ 64 <50769000>;
+		};
+		opp-55000000 {
+			opp-hz = /bits/ 64 <55000000>;
+		};
+		opp-60000000 {
+			opp-hz = /bits/ 64 <60000000>;
+		};
+		opp-66000000 {
+			opp-hz = /bits/ 64 <66000000>;
+		};
+		opp-73333000 {
+			opp-hz = /bits/ 64 <73333000>;
+		};
+		opp-82500000 {
+			opp-hz = /bits/ 64 <82500000>;
+		};
+		opp-94285000 {
+			opp-hz = /bits/ 64 <94285000>;
+		};
+		opp-110000000 {
+			opp-hz = /bits/ 64 <110000000>;
+		};
+		opp-132000000 {
+			opp-hz = /bits/ 64 <132000000>;
+		};
+		opp-165000000 {
+			opp-hz = /bits/ 64 <165000000>;
+		};
+		opp-220000000 {
+			opp-hz = /bits/ 64 <220000000>;
+		};
+	};
+
+	clkc: clock-controller@1fe78030 {
+		compatible = "loongson,ls1b-clk";
+		reg = <0x1fe78030 0x8>;
+		clocks = <&xtal>;
+		#clock-cells = <1>;
+	};
+};
+
+&soc {
+	syscon: syscon@420 {
+		compatible = "loongson,ls1b-syscon", "syscon";
+		reg = <0x420 0x8>;
+	};
+
+	dma: dma-controller@1160 {
+		compatible = "loongson,ls1b-apbdma";
+		reg = <0x1160 0x4>;
+		interrupt-parent = <&intc0>;
+		interrupts = <13 IRQ_TYPE_EDGE_RISING>,
+			     <14 IRQ_TYPE_EDGE_RISING>,
+			     <15 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "ch0", "ch1", "ch2";
+		#dma-cells = <1>;
+	};
+
+	ehci: usb@100000 {
+		compatible = "generic-ehci";
+		reg = <0x100000 0x100>;
+		interrupt-parent = <&intc1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	ohci: usb@108000 {
+		compatible = "generic-ohci";
+		reg = <0x108000 0x100>;
+		interrupt-parent = <&intc1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	gmac0: ethernet@110000 {
+		compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a";
+		reg = <0x110000 0x10000>;
+		clocks = <&clkc LS1X_CLKID_AHB>;
+		clock-names = "stmmaceth";
+		interrupt-parent = <&intc1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		loongson,ls1-syscon = <&syscon>;
+		snps,pbl = <1>;
+		status = "disabled";
+	};
+
+	gmac1: ethernet@120000 {
+		compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a";
+		reg = <0x120000 0x10000>;
+		clocks = <&clkc LS1X_CLKID_AHB>;
+		clock-names = "stmmaceth";
+		interrupt-parent = <&intc1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		loongson,ls1-syscon = <&syscon>;
+		snps,pbl = <1>;
+		status = "disabled";
+	};
+};
+
+&apb {
+	clocksource: timer@1c030 {
+		compatible = "loongson,ls1b-pwmtimer";
+		reg = <0x1c030 0x10>;
+		clocks = <&clkc LS1X_CLKID_APB>;
+		interrupt-parent = <&intc0>;
+		interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	watchdog: watchdog@1c060 {
+		compatible = "loongson,ls1b-wdt";
+		reg = <0x1c060 0xc>;
+		clocks = <&clkc LS1X_CLKID_APB>;
+		status = "disabled";
+	};
+
+	rtc: rtc@24000 {
+		compatible = "loongson,ls1b-rtc";
+		reg = <0x24000 0x78>;
+		interrupt-parent = <&intc0>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	ac97: audio-controller@34000 {
+		compatible = "loongson,ls1b-ac97";
+		reg = <0x34000 0x60>, <0x32420 0x4>, <0x34c4c 0x4>;
+		reg-names = "ac97", "audio-tx", "audio-rx";
+		dmas = <&dma 1>, <&dma 2>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	nand: nand-controller@38000 {
+		compatible = "loongson,ls1b-nand-controller";
+		reg = <0x38000 0x24>, <0x38040 0x4>;
+		reg-names = "nand", "nand-dma";
+		dmas = <&dma 0>;
+		dma-names = "rxtx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		nand@0 {
+			reg = <0>;
+			label = "ls1x-nand";
+			nand-use-soft-ecc-engine;
+			nand-ecc-algo = "hamming";
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&gpio0 {
+	ngpios = <31>;
+};
+
+&gpio1 {
+	ngpios = <30>;
+};
+
+&uart1 {
+	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart2 {
+	interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart3 {
+	interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/mips/boot/dts/loongson/loongson1c.dtsi b/arch/mips/boot/dts/loongson/loongson1c.dtsi
new file mode 100644
index 000000000000..5e80c6a657af
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson1c.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+#include "loongson1.dtsi"
+
+/ {
+	clkc: clock-controller@1fe78030 {
+		compatible = "loongson,ls1c-clk";
+		reg = <0x1fe78030 0x8>;
+		clocks = <&xtal>;
+		#clock-cells = <1>;
+	};
+};
+
+&soc {
+	syscon: syscon@420 {
+		compatible = "loongson,ls1c-syscon", "syscon";
+		reg = <0x420 0x8>;
+	};
+
+	intc4: interrupt-controller@10a0 {
+		compatible = "loongson,ls1x-intc";
+		reg = <0x10a0 0x18>;
+		interrupt-controller;
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <6>;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@10c8 {
+		compatible = "loongson,ls1x-gpio";
+		reg = <0x10c8 0x4>;
+		gpio-controller;
+		ngpios = <32>;
+		#gpio-cells = <2>;
+	};
+
+	gpio3: gpio@10cc {
+		compatible = "loongson,ls1x-gpio";
+		reg = <0x10cc 0x4>;
+		gpio-controller;
+		ngpios = <32>;
+		#gpio-cells = <2>;
+	};
+
+	dma: dma-controller@1160 {
+		compatible = "loongson,ls1c-apbdma", "loongson,ls1b-apbdma";
+		reg = <0x1160 0x4>;
+		interrupt-parent = <&intc0>;
+		interrupts = <13 IRQ_TYPE_EDGE_RISING>,
+			     <14 IRQ_TYPE_EDGE_RISING>,
+			     <15 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "ch0", "ch1", "ch2";
+		#dma-cells = <1>;
+	};
+
+	emac: ethernet@110000 {
+		compatible = "loongson,ls1c-emac", "snps,dwmac-3.50a";
+		reg = <0x110000 0x10000>;
+		clocks = <&clkc LS1X_CLKID_AHB>;
+		clock-names = "stmmaceth";
+		interrupt-parent = <&intc1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		loongson,ls1-syscon = <&syscon>;
+		snps,pbl = <1>;
+		status = "disabled";
+	};
+
+	ehci: usb@120000 {
+		compatible = "generic-ehci";
+		reg = <0x120000 0x100>;
+		interrupt-parent = <&intc1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	ohci: usb@128000 {
+		compatible = "generic-ohci";
+		reg = <0x128000 0x100>;
+		interrupt-parent = <&intc1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+};
+
+&apb {
+	watchdog: watchdog@1c060 {
+		compatible = "loongson,ls1c-wdt";
+		reg = <0x1c060 0xc>;
+		clocks = <&clkc LS1X_CLKID_APB>;
+		status = "disabled";
+	};
+
+	rtc: rtc@24000 {
+		compatible = "loongson,ls1c-rtc";
+		reg = <0x24000 0x78>;
+		status = "disabled";
+	};
+
+	nand: nand-controller@38000 {
+		compatible = "loongson,ls1c-nand-controller";
+		reg = <0x38000 0x24>, <0x38040 0x4>;
+		reg-names = "nand", "nand-dma";
+		dmas = <&dma 0>;
+		dma-names = "rxtx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		nand@0 {
+			reg = <0>;
+			label = "ls1x-nand";
+			nand-use-soft-ecc-engine;
+			nand-ecc-algo = "hamming";
+		};
+	};
+};
+
+&gpio0 {
+	ngpios = <32>;
+};
+
+&gpio1 {
+	ngpios = <32>;
+};
+
+&uart1 {
+	interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart2 {
+	interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart3 {
+	interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts b/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts
index c7ea4f1c0bb2..6c277ab83d4b 100644
--- a/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts
+++ b/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts
@@ -29,6 +29,7 @@
 		compatible = "loongson,pch-msi-1.0";
 		reg = <0 0x2ff00000 0 0x8>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		msi-controller;
 		loongson,msi-base-vec = <64>;
 		loongson,msi-num-vecs = <64>;
diff --git a/arch/mips/boot/dts/loongson/ls1b-demo.dts b/arch/mips/boot/dts/loongson/ls1b-demo.dts
new file mode 100644
index 000000000000..13f8b102e100
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/ls1b-demo.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "loongson1b.dtsi"
+
+/ {
+	compatible = "loongson,ls1b-demo", "loongson,ls1b";
+	model = "LS1B-DEMO Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:38400n8";
+	};
+
+	codec: audio-codec {
+		compatible = "realtek,alc203";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "ls1b-alc203";
+		simple-audio-card,format = "ac97";
+		simple-audio-card,widgets =
+			"Speaker", "Line Out Jack",
+			"Headphone", "Headphone Jack",
+			"Microphone", "Microphone Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "TX",
+			"Headphone Jack", "TX",
+			"RX", "Microphone Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ac97>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+&xtal {
+	clock-frequency = <33000000>;
+};
+
+&gmac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x1000000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x7000000>;
+			};
+		};
+	};
+};
+
+&ac97 {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
new file mode 100644
index 000000000000..94ec151c0a94
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "loongson1b.dtsi"
+
+/ {
+	compatible = "loongson,lsgz-1b-dev", "loongson,ls1b";
+	model = "LSGZ_1B_DEV Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		serial0 = &uart2;
+		serial1 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led9 {
+			label = "led9";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led6 {
+			label = "led6";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+
+	codec: audio-codec {
+		compatible = "realtek,alc203";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "ls1b-alc655";
+		simple-audio-card,format = "ac97";
+		simple-audio-card,widgets =
+			"Speaker", "Line Out Jack",
+			"Line", "Line In Jack",
+			"Microphone", "Microphone Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "TX",
+			"RX", "Line In Jack",
+			"RX", "Microphone Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ac97>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+&xtal {
+	clock-frequency = <33000000>;
+};
+
+&gmac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
+
+&gmac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x1000000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x7000000>;
+			};
+		};
+	};
+};
+
+&ac97 {
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/loongson/smartloong-1c.dts b/arch/mips/boot/dts/loongson/smartloong-1c.dts
new file mode 100644
index 000000000000..e6c6c2f00c42
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/smartloong-1c.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2025 Keguang Zhang <keguang.zhang@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "loongson1c.dtsi"
+
+/ {
+	compatible = "loongmasses,smartloong-1c", "loongson,ls1c";
+	model = "Smartloong-1C Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "led0";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+};
+
+&xtal {
+	clock-frequency = <24000000>;
+};
+
+&emac {
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@13 {
+			reg = <0x13>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x1000000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x7000000>;
+			};
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
index 6898b2d8267d..9fc1a1b0a81b 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
+++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
@@ -21,3 +21,11 @@
 		      <0x8 0x02000000 0x0 0x7E000000>;
 	};
 };
+
+&i2c2 {
+	temperature-sensor@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "U60";
+	};
+};
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 5d73e8320b8e..36a73e8a63a1 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -49,6 +49,28 @@
 		mhm_reserved_0: the-mhm-reserved-0@0 {
 			reg = <0x8 0x00000000 0x0 0x0000800>;
 		};
+
+		nvram@461fe00 {
+			compatible = "mobileye,eyeq5-bootloader-config", "nvmem-rmem";
+			reg = <0x0 0x0461fe00 0x0 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			no-map;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				eth0_mac: mac@7c {
+					reg = <0x7c 0x6>;
+				};
+
+				eth1_mac: mac@82 {
+					reg = <0x82 0x6>;
+				};
+			};
+		};
 	};
 
 	aliases {
@@ -88,6 +110,81 @@
 		ranges;
 		compatible = "simple-bus";
 
+		i2c0: i2c@300000 {
+			compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+			reg = <0 0x300000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>; /* Fast mode */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&olb 35>, <&olb EQ5C_PER_I2C>;
+			clock-names = "i2cclk", "apb_pclk";
+			resets = <&olb 0 13>;
+			i2c-transfer-timeout-us = <10000>;
+			mobileye,olb = <&olb 0>;
+		};
+
+		i2c1: i2c@400000 {
+			compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+			reg = <0 0x400000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>; /* Fast mode */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&olb 35>, <&olb EQ5C_PER_I2C>;
+			clock-names = "i2cclk", "apb_pclk";
+			resets = <&olb 0 14>;
+			i2c-transfer-timeout-us = <10000>;
+			mobileye,olb = <&olb 1>;
+		};
+
+		i2c2: i2c@500000 {
+			compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+			reg = <0 0x500000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>; /* Fast mode */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&olb 35>, <&olb EQ5C_PER_I2C>;
+			clock-names = "i2cclk", "apb_pclk";
+			resets = <&olb 0 15>;
+			i2c-transfer-timeout-us = <10000>;
+			mobileye,olb = <&olb 2>;
+		};
+
+		i2c3: i2c@600000 {
+			compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+			reg = <0 0x600000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>; /* Fast mode */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&olb 35>, <&olb EQ5C_PER_I2C>;
+			clock-names = "i2cclk", "apb_pclk";
+			resets = <&olb 0 16>;
+			i2c-transfer-timeout-us = <10000>;
+			mobileye,olb = <&olb 3>;
+		};
+
+		i2c4: i2c@700000 {
+			compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+			reg = <0 0x700000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>; /* Fast mode */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&olb 35>, <&olb EQ5C_PER_I2C>;
+			clock-names = "i2cclk", "apb_pclk";
+			resets = <&olb 0 17>;
+			i2c-transfer-timeout-us = <10000>;
+			mobileye,olb = <&olb 4>;
+		};
+
 		uart0: serial@800000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0 0x800000 0x0 0x1000>;
@@ -156,6 +253,58 @@
 				clocks = <&olb EQ5C_CPU_CORE0>;
 			};
 		};
+
+		emmc: mmc@2200000 {
+			compatible = "mobileye,eyeq-sd4hc", "cdns,sd4hc";
+			reg = <0 0x2200000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&olb EQ5C_PER_EMMC>;
+			bus-width = <8>;
+			max-frequency = <200000000>;
+			mmc-ddr-1_8v;
+			sd-uhs-ddr50;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
+			cdns,phy-input-delay-legacy = <4>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <32>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <32>;
+			cdns,phy-dll-delay-strobe = <32>;
+		};
+
+		gpio0: gpio@1400000 {
+			compatible = "mobileye,eyeq5-gpio";
+			reg = <0x0 0x1400000 0x0 0x1000>;
+			gpio-bank = <0>;
+			ngpios = <29>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&olb 0 0 29>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			resets = <&olb 0 26>;
+		};
+
+		gpio1: gpio@1500000 {
+			compatible = "mobileye,eyeq5-gpio";
+			reg = <0x0 0x1500000 0x0 0x1000>;
+			gpio-bank = <1>;
+			ngpios = <23>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&olb 0 29 23>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			resets = <&olb 0 26>;
+		};
 	};
 };
 
diff --git a/arch/mips/boot/dts/mobileye/eyeq6h.dtsi b/arch/mips/boot/dts/mobileye/eyeq6h.dtsi
index 4a1a43f351d3..5ae939d25ea8 100644
--- a/arch/mips/boot/dts/mobileye/eyeq6h.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq6h.dtsi
@@ -32,6 +32,10 @@
 		#interrupt-cells = <1>;
 	};
 
+	coherency-manager {
+		compatible = "mobileye,eyeq6-cm";
+	};
+
 	xtal: clock-30000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -105,6 +109,28 @@
 			clock-names = "ref";
 		};
 
+		emmc: mmc@d8010000 {
+			compatible = "mobileye,eyeq-sd4hc", "cdns,sd4hc";
+			reg = <0 0xd8010000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&olb_south EQ6HC_SOUTH_DIV_EMMC>;
+			bus-width = <8>;
+			max-frequency = <200000000>;
+			mmc-ddr-1_8v;
+			sd-uhs-ddr50;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
+			cdns,phy-input-delay-legacy = <4>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <32>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <32>;
+			cdns,phy-dll-delay-strobe = <32>;
+		};
+
 		olb_south: system-controller@d8013000 {
 			compatible = "mobileye,eyeq6h-south-olb", "syscon";
 			reg = <0x0 0xd8013000 0x0 0x1000>;
diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
index eeb6b7aae83b..566dbec3c7fb 100644
--- a/arch/mips/boot/dts/mscc/Makefile
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -8,6 +8,3 @@ dtb-$(CONFIG_SOC_VCOREIII)	+= \
 	ocelot_pcb123.dtb \
 	serval_pcb105.dtb \
 	serval_pcb106.dtb
-
-
-obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
index b5f7426998b1..c1c7b27296dd 100644
--- a/arch/mips/boot/dts/mti/Makefile
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -1,5 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_MIPS_MALTA)	+= malta.dtb
 dtb-$(CONFIG_LEGACY_BOARD_SEAD3)	+= sead3.dtb
-
-obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/pic32/Makefile b/arch/mips/boot/dts/pic32/Makefile
index fb57f36324db..4069cda2370c 100644
--- a/arch/mips/boot/dts/pic32/Makefile
+++ b/arch/mips/boot/dts/pic32/Makefile
@@ -3,5 +3,3 @@ dtb-$(CONFIG_DTB_PIC32_MZDA_SK)		+= pic32mzda_sk.dtb
 
 dtb-$(CONFIG_DTB_PIC32_NONE)		+= \
 					pic32mzda_sk.dtb
-
-obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/pic32/pic32mzda.dtsi b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
index fdc721b414a8..feca35ba56a4 100644
--- a/arch/mips/boot/dts/pic32/pic32mzda.dtsi
+++ b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
@@ -225,7 +225,7 @@
 		gpio-ranges = <&pic32_pinctrl 0 144 16>;
 	};
 
-	sdhci: sdhci@1f8ec000 {
+	sdhci: mmc@1f8ec000 {
 		compatible = "microchip,pic32mzda-sdhci";
 		reg = <0x1f8ec000 0x100>;
 		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 61dcfa5b6ca7..c1ca03a27b6c 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -156,6 +156,15 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		wifi: wifi@180c0000 {
+			compatible = "qca,ar9130-wifi";
+			reg = <0x180c0000 0x230000>;
+
+			interrupts = <2>;
+
+			status = "disabled";
+		};
 	};
 
 	usb_phy: usb-phy {
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index f894fe17816b..a7901bb040ce 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -108,3 +108,7 @@
 		};
 	};
 };
+
+&wifi {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
index 768ac0f869b1..6eb84a26a20f 100644
--- a/arch/mips/boot/dts/qca/ar9331.dtsi
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -285,6 +285,15 @@
 
 			status = "disabled";
 		};
+
+		wifi: wifi@18100000 {
+			compatible = "qca,ar9330-wifi";
+			reg = <0x18100000 0x20000>;
+
+			interrupts = <2>;
+
+			status = "disabled";
+		};
 	};
 
 	usb_phy: usb-phy {
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
index c857cd22f7db..08e728b8ced8 100644
--- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -97,3 +97,7 @@
 &phy_port4 {
 	status = "okay";
 };
+
+&wifi {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
index 7affa58d4fa6..37a74aabe4b4 100644
--- a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
@@ -98,3 +98,7 @@
 		reg = <0>;
 	};
 };
+
+&wifi {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts
index 8904aa917a6e..1450419024cb 100644
--- a/arch/mips/boot/dts/qca/ar9331_omega.dts
+++ b/arch/mips/boot/dts/qca/ar9331_omega.dts
@@ -74,3 +74,7 @@
 		reg = <0>;
 	};
 };
+
+&wifi {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
index dc65ebd60bbc..5786a827c000 100644
--- a/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
+++ b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
@@ -106,3 +106,7 @@
 &phy_port4 {
 	status = "okay";
 };
+
+&wifi {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
index 10b9759228b7..a7108c803eb3 100644
--- a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
+++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
@@ -114,3 +114,7 @@
 		reg = <0>;
 	};
 };
+
+&wifi {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
index d27d7e8c700f..dc002152d843 100644
--- a/arch/mips/boot/dts/ralink/Makefile
+++ b/arch/mips/boot/dts/ralink/Makefile
@@ -10,5 +10,3 @@ dtb-$(CONFIG_SOC_MT7621) += \
 	mt7621-gnubee-gb-pc1.dtb \
 	mt7621-gnubee-gb-pc2.dtb \
 	mt7621-tplink-hc220-g5-v1.dtb
-
-obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
index 18107ca0a06b..0bfb1dde9764 100644
--- a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -5,7 +5,7 @@
 
 /dts-v1/;
 
-/include/ "mt7628a.dtsi"
+#include "mt7628a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -56,7 +56,7 @@
 		led-power-green {
 			label = "smartgw:power:green";
 			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
+			linux,default-trigger = "timer";
 		};
 
 		led-power-red {
diff --git a/arch/mips/boot/dts/ralink/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi
index 1f6e5320f486..460164bdd430 100644
--- a/arch/mips/boot/dts/ralink/mt7620a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi
@@ -1,4 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/mediatek,mtmips-sysc.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -25,9 +27,11 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		sysc@0 {
-			compatible = "ralink,mt7620a-sysc";
+		sysc: syscon@0 {
+			compatible = "ralink,mt7620-sysc", "syscon";
 			reg = <0x0 0x100>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		intc: intc@200 {
@@ -50,10 +54,22 @@
 			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
 
+			clocks = <&sysc MT7620_CLK_UARTLITE>;
+
 			interrupt-parent = <&intc>;
 			interrupts = <12>;
 
 			reg-shift = <2>;
 		};
 	};
+
+	wmac: wifi@10180000 {
+		compatible = "ralink,rt2880-wifi";
+		reg = <0x10180000 0x40000>;
+
+		clocks = <&sysc 16>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+	};
 };
diff --git a/arch/mips/boot/dts/ralink/mt7620a_eval.dts b/arch/mips/boot/dts/ralink/mt7620a_eval.dts
index 8de8f89f31b8..da483ee65b61 100644
--- a/arch/mips/boot/dts/ralink/mt7620a_eval.dts
+++ b/arch/mips/boot/dts/ralink/mt7620a_eval.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
 
 / {
 	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
index 45a15e005cc4..5d7a6cfa9e2b 100644
--- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/mediatek,mtmips-sysc.h>
 
 / {
 	#address-cells = <1>;
@@ -16,11 +17,6 @@
 		};
 	};
 
-	resetc: reset-controller {
-		compatible = "ralink,rt2880-reset";
-		#reset-cells = <1>;
-	};
-
 	cpuintc: interrupt-controller {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
@@ -36,9 +32,11 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		sysc: system-controller@0 {
-			compatible = "ralink,mt7620a-sysc", "syscon";
+		sysc: syscon@0 {
+			compatible = "ralink,mt7628-sysc", "ralink,mt7688-sysc", "syscon";
 			reg = <0x0 0x60>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		pinmux: pinmux@60 {
@@ -136,13 +134,8 @@
 
 		watchdog: watchdog@100 {
 			compatible = "mediatek,mt7621-wdt";
-			reg = <0x100 0x30>;
-
-			resets = <&resetc 8>;
-			reset-names = "wdt";
-
-			interrupt-parent = <&intc>;
-			interrupts = <24>;
+			reg = <0x100 0x100>;
+			mediatek,sysctl = <&sysc>;
 
 			status = "disabled";
 		};
@@ -154,7 +147,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			resets = <&resetc 9>;
+			resets = <&sysc 9>;
 			reset-names = "intc";
 
 			interrupt-parent = <&cpuintc>;
@@ -190,7 +183,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_spi_spi>;
 
-			resets = <&resetc 18>;
+			clocks = <&sysc MT76X8_CLK_SPI1>;
+
+			resets = <&sysc 18>;
 			reset-names = "spi";
 
 			#address-cells = <1>;
@@ -206,7 +201,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_i2c_i2c>;
 
-			resets = <&resetc 16>;
+			clocks = <&sysc MT76X8_CLK_I2C>;
+
+			resets = <&sysc 16>;
 			reset-names = "i2c";
 
 			#address-cells = <1>;
@@ -222,7 +219,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_uart0_uart>;
 
-			resets = <&resetc 12>;
+			clocks = <&sysc MT76X8_CLK_UART0>;
+
+			resets = <&sysc 12>;
 			reset-names = "uart0";
 
 			interrupt-parent = <&intc>;
@@ -238,7 +237,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_uart1_uart>;
 
-			resets = <&resetc 19>;
+			clocks = <&sysc MT76X8_CLK_UART1>;
+
+			resets = <&sysc 19>;
 			reset-names = "uart1";
 
 			interrupt-parent = <&intc>;
@@ -254,7 +255,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinmux_uart2_uart>;
 
-			resets = <&resetc 20>;
+			clocks = <&sysc MT76X8_CLK_UART2>;
+
+			resets = <&sysc 20>;
 			reset-names = "uart2";
 
 			interrupt-parent = <&intc>;
@@ -271,7 +274,7 @@
 		#phy-cells = <0>;
 
 		ralink,sysctl = <&sysc>;
-		resets = <&resetc 22 &resetc 25>;
+		resets = <&sysc 22 &sysc 25>;
 		reset-names = "host", "device";
 	};
 
@@ -290,6 +293,8 @@
 		compatible = "mediatek,mt7628-wmac";
 		reg = <0x10300000 0x100000>;
 
+		clocks = <&sysc MT76X8_CLK_WMAC>;
+
 		interrupt-parent = <&cpuintc>;
 		interrupts = <6>;
 
diff --git a/arch/mips/boot/dts/ralink/omega2p.dts b/arch/mips/boot/dts/ralink/omega2p.dts
index 5884fd48f59a..51a40ab6df2b 100644
--- a/arch/mips/boot/dts/ralink/omega2p.dts
+++ b/arch/mips/boot/dts/ralink/omega2p.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "mt7628a.dtsi"
+#include "mt7628a.dtsi"
 
 / {
 	compatible = "onion,omega2+", "ralink,mt7688a-soc", "ralink,mt7628a-soc";
diff --git a/arch/mips/boot/dts/ralink/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi
index 8fc1987d9063..1f2ea3434324 100644
--- a/arch/mips/boot/dts/ralink/rt2880.dtsi
+++ b/arch/mips/boot/dts/ralink/rt2880.dtsi
@@ -1,4 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/mediatek,mtmips-sysc.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -25,9 +27,11 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		sysc@0 {
-			compatible = "ralink,rt2880-sysc";
+		sysc: syscon@0 {
+			compatible = "ralink,rt2880-sysc", "syscon";
 			reg = <0x0 0x100>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		intc: intc@200 {
@@ -50,6 +54,8 @@
 			compatible = "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
 
+			clocks = <&sysc RT2880_CLK_UARTLITE>;
+
 			interrupt-parent = <&intc>;
 			interrupts = <8>;
 
diff --git a/arch/mips/boot/dts/ralink/rt2880_eval.dts b/arch/mips/boot/dts/ralink/rt2880_eval.dts
index 759bc1dd5b83..9854a4b120e9 100644
--- a/arch/mips/boot/dts/ralink/rt2880_eval.dts
+++ b/arch/mips/boot/dts/ralink/rt2880_eval.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
 
 / {
 	compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
diff --git a/arch/mips/boot/dts/ralink/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi
index 23062333a76d..a7d9bb9bc1af 100644
--- a/arch/mips/boot/dts/ralink/rt3050.dtsi
+++ b/arch/mips/boot/dts/ralink/rt3050.dtsi
@@ -1,4 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/mediatek,mtmips-sysc.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -25,9 +27,11 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		sysc@0 {
-			compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
+		sysc: syscon@0 {
+			compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc", "syscon";
 			reg = <0x0 0x100>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		intc: intc@200 {
@@ -50,6 +54,8 @@
 			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
 
+			clocks = <&sysc RT305X_CLK_UARTLITE>;
+
 			interrupt-parent = <&intc>;
 			interrupts = <12>;
 
diff --git a/arch/mips/boot/dts/ralink/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi
index 61132cf157e5..11d111a06037 100644
--- a/arch/mips/boot/dts/ralink/rt3883.dtsi
+++ b/arch/mips/boot/dts/ralink/rt3883.dtsi
@@ -1,4 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/mediatek,mtmips-sysc.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -25,9 +27,11 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		sysc@0 {
-			compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
+		sysc: syscon@0 {
+			compatible = "ralink,rt3883-sysc", "syscon";
 			reg = <0x0 0x100>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		intc: intc@200 {
@@ -50,6 +54,8 @@
 			compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
 
+			clocks = <&sysc RT3883_CLK_UARTLITE>;
+
 			interrupt-parent = <&intc>;
 			interrupts = <12>;
 
diff --git a/arch/mips/boot/dts/ralink/rt3883_eval.dts b/arch/mips/boot/dts/ralink/rt3883_eval.dts
index c22bc84df219..a095a1fe9415 100644
--- a/arch/mips/boot/dts/ralink/rt3883_eval.dts
+++ b/arch/mips/boot/dts/ralink/rt3883_eval.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
 
 / {
 	compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc";
diff --git a/arch/mips/boot/dts/realtek/Makefile b/arch/mips/boot/dts/realtek/Makefile
index d2709798763f..3ac795d85236 100644
--- a/arch/mips/boot/dts/realtek/Makefile
+++ b/arch/mips/boot/dts/realtek/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-y	+= cisco_sg220-26.dtb
-dtb-y	+= cameo-rtl9302c-2x-rtl8224-2xge.dtb
+dtb-$(CONFIG_MACH_REALTEK_RTL)	+= cisco_sg220-26.dtb
+dtb-$(CONFIG_MACH_REALTEK_RTL)	+= cameo-rtl9302c-2x-rtl8224-2xge.dtb
diff --git a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
index 6789bf374044..6f6a05d4088e 100644
--- a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
+++ b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
@@ -71,3 +71,99 @@
 		};
 	};
 };
+
+&mdio0 {
+	/* External RTL8224 */
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&mdio1 {
+	/* External RTL8224 */
+	phy4: ethernet-phy@0 {
+		reg = <0>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+	phy5: ethernet-phy@1 {
+		reg = <1>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+	phy6: ethernet-phy@2 {
+		reg = <2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+	phy7: ethernet-phy@3 {
+		reg = <3>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&switch0 {
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			phy-handle = <&phy0>;
+			phy-mode = "usxgmii";
+		};
+		port@1 {
+			reg = <1>;
+			phy-handle = <&phy1>;
+			phy-mode = "usxgmii";
+		};
+		port@2 {
+			reg = <2>;
+			phy-handle = <&phy2>;
+			phy-mode = "usxgmii";
+		};
+		port@3 {
+			reg = <3>;
+			phy-handle = <&phy3>;
+			phy-mode = "usxgmii";
+		};
+		port@16 {
+			reg = <16>;
+			phy-handle = <&phy4>;
+			phy-mode = "usxgmii";
+		};
+		port@17 {
+			reg = <17>;
+			phy-handle = <&phy5>;
+			phy-mode = "usxgmii";
+		};
+		port@18 {
+			reg = <18>;
+			phy-handle = <&phy6>;
+			phy-mode = "usxgmii";
+		};
+		port@19 {
+			reg = <19>;
+			phy-handle = <&phy7>;
+			phy-mode = "usxgmii";
+		};
+		port@24{
+			reg = <24>;
+			phy-mode = "10gbase-r";
+		};
+		port@25{
+			reg = <25>;
+			phy-mode = "10gbase-r";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/realtek/cisco_sg220-26.dts b/arch/mips/boot/dts/realtek/cisco_sg220-26.dts
index 1cdbb09297ef..fab3d552404d 100644
--- a/arch/mips/boot/dts/realtek/cisco_sg220-26.dts
+++ b/arch/mips/boot/dts/realtek/cisco_sg220-26.dts
@@ -2,9 +2,10 @@
 
 /dts-v1/;
 
-#include "rtl83xx.dtsi"
 #include "rtl838x.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Cisco SG220-26";
 	compatible = "cisco,sg220-26", "realtek,rtl8382-soc";
@@ -18,6 +19,13 @@
 		device_type = "memory";
 		reg = <0x0 0x8000000>;
 	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		priority = <192>;
+		open-source;
+	};
 };
 
 &uart0 {
diff --git a/arch/mips/boot/dts/realtek/rtl838x.dtsi b/arch/mips/boot/dts/realtek/rtl838x.dtsi
index 722106e39194..ce522a6af262 100644
--- a/arch/mips/boot/dts/realtek/rtl838x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl838x.dtsi
@@ -1,6 +1,14 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -9,8 +17,7 @@
 			device_type = "cpu";
 			compatible = "mips,mips4KEc";
 			reg = <0>;
-			clocks = <&baseclk 0>;
-			clock-names = "cpu";
+			clocks = <&baseclk>;
 		};
 	};
 
@@ -19,4 +26,104 @@
 		#clock-cells = <0>;
 		clock-frequency = <500000000>;
 	};
+
+	cpuintc: cpuintc {
+		compatible = "mti,cpu-interrupt-controller";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	lx_clk: clock-lexra {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
+	soc@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x18000000 0x10000>;
+
+		spi0: spi@1200 {
+			compatible = "realtek,rtl8380-spi";
+			reg = <0x1200 0x100>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@2000 {
+			compatible = "ns16550a";
+			reg = <0x2000 0x100>;
+
+			clocks = <&lx_clk>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <31>;
+
+			reg-io-width = <1>;
+			reg-shift = <2>;
+			fifo-size = <1>;
+			no-loopback-test;
+
+			status = "disabled";
+		};
+
+		uart1: serial@2100 {
+			compatible = "ns16550a";
+			reg = <0x2100 0x100>;
+
+			clocks = <&lx_clk>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <30>;
+
+			reg-io-width = <1>;
+			reg-shift = <2>;
+			fifo-size = <1>;
+			no-loopback-test;
+
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@3000 {
+			compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
+			reg = <0x3000 0x20>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>, <3>, <4>, <5>, <6>;
+		};
+
+		watchdog: watchdog@3150 {
+			compatible = "realtek,rtl8380-wdt";
+			reg = <0x3150 0xc>;
+
+			realtek,reset-mode = "soc";
+
+			clocks = <&lx_clk>;
+			timeout-sec = <20>;
+
+			interrupt-parent = <&intc>;
+			interrupt-names = "phase1", "phase2";
+			interrupts = <19>, <18>;
+		};
+
+		gpio0: gpio@3500 {
+			compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
+			reg = <0x3500 0x1c>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <24>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <23>;
+		};
+	};
 };
diff --git a/arch/mips/boot/dts/realtek/rtl83xx.dtsi b/arch/mips/boot/dts/realtek/rtl83xx.dtsi
deleted file mode 100644
index 03ddc61f7c9e..000000000000
--- a/arch/mips/boot/dts/realtek/rtl83xx.dtsi
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	cpuintc: cpuintc {
-		compatible = "mti,cpu-interrupt-controller";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x18000000 0x10000>;
-
-		uart0: serial@2000 {
-			compatible = "ns16550a";
-			reg = <0x2000 0x100>;
-
-			clock-frequency = <200000000>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <31>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-
-			status = "disabled";
-		};
-
-		uart1: serial@2100 {
-			compatible = "ns16550a";
-			reg = <0x2100 0x100>;
-
-			clock-frequency = <200000000>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <30>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi
index 17577457d159..24e262e2dc2a 100644
--- a/arch/mips/boot/dts/realtek/rtl930x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi
@@ -1,10 +1,23 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
 
-#include "rtl83xx.dtsi"
-
 / {
 	compatible = "realtek,rtl9302-soc";
 
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpuintc: cpuintc {
+		compatible = "mti,cpu-interrupt-controller";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -13,8 +26,7 @@
 			device_type = "cpu";
 			compatible = "mips,mips34Kc";
 			reg = <0>;
-			clocks = <&baseclk 0>;
-			clock-names = "cpu";
+			clocks = <&baseclk>;
 		};
 	};
 
@@ -36,6 +48,10 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		interrupt-parent = <&intc>;
+		interrupts = <23>, <24>;
+		interrupt-names = "switch", "nic";
+
 		reboot@c {
 			compatible = "syscon-reboot";
 			reg = <0x0c 0x4>;
@@ -57,65 +73,145 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
+
+		mdio_controller: mdio-controller@ca00 {
+			compatible = "realtek,rtl9301-mdio";
+			reg = <0xca00 0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			mdio0: mdio-bus@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+			mdio1: mdio-bus@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+			mdio2: mdio-bus@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+			mdio3: mdio-bus@3 {
+				reg = <3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
 	};
-};
 
-&soc {
-	ranges = <0x0 0x18000000 0x20000>;
+	soc: soc@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x18000000 0x20000>;
 
-	intc: interrupt-controller@3000 {
-		compatible = "realtek,rtl9300-intc", "realtek,rtl-intc";
-		reg = <0x3000 0x18>, <0x3018 0x18>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
+		intc: interrupt-controller@3000 {
+			compatible = "realtek,rtl9300-intc", "realtek,rtl-intc";
+			reg = <0x3000 0x18>, <0x3018 0x18>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
 
-		interrupt-parent = <&cpuintc>;
-		interrupts = <2>, <3>, <4>, <5>, <6>, <7>;
-	};
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>, <3>, <4>, <5>, <6>, <7>;
+		};
 
-	spi0: spi@1200 {
-		compatible = "realtek,rtl8380-spi";
-		reg = <0x1200 0x100>;
+		spi0: spi@1200 {
+			compatible = "realtek,rtl8380-spi";
+			reg = <0x1200 0x100>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 
-	timer0: timer@3200 {
-		compatible = "realtek,rtl9302-timer", "realtek,otto-timer";
-		reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>,
-		    <0x3230 0x10>, <0x3240 0x10>;
+		timer0: timer@3200 {
+			compatible = "realtek,rtl9302-timer", "realtek,otto-timer";
+			reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>,
+			    <0x3230 0x10>, <0x3240 0x10>;
 
-		interrupt-parent = <&intc>;
-		interrupts = <7>, <8>, <9>, <10>, <11>;
-		clocks = <&lx_clk>;
-	};
+			interrupt-parent = <&intc>;
+			interrupts = <7>, <8>, <9>, <10>, <11>;
+			clocks = <&lx_clk>;
+		};
 
-	snand: spi@1a400 {
-		compatible = "realtek,rtl9301-snand";
-		reg = <0x1a400 0x44>;
-		interrupt-parent = <&intc>;
-		interrupts = <19>;
-		clocks = <&lx_clk>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
+		watchdog0: watchdog@3260 {
+			compatible = "realtek,rtl9300-wdt";
+			reg = <0x3260 0xc>;
 
-&uart0 {
-	/delete-property/ clock-frequency;
-	clocks = <&lx_clk>;
+			realtek,reset-mode = "soc";
 
-	interrupt-parent = <&intc>;
-	interrupts = <30>;
-};
+			clocks = <&lx_clk>;
+			timeout-sec = <30>;
 
-&uart1 {
-	/delete-property/ clock-frequency;
-	clocks = <&lx_clk>;
+			interrupt-parent = <&intc>;
+			interrupt-names = "phase1", "phase2";
+			interrupts = <5>, <6>;
+		};
 
-	interrupt-parent = <&intc>;
-	interrupts = <31>;
-};
+		gpio0: gpio@3300 {
+			compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
+			reg = <0x3300 0x1c>, <0x3338 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <24>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <13>;
+		};
+
+		snand: spi@1a400 {
+			compatible = "realtek,rtl9301-snand";
+			reg = <0x1a400 0x44>;
+			interrupt-parent = <&intc>;
+			interrupts = <19>;
+			clocks = <&lx_clk>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
+		uart0: serial@2000 {
+			compatible = "ns16550a";
+			reg = <0x2000 0x100>;
+
+			clocks = <&lx_clk>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <30>;
+
+			reg-io-width = <1>;
+			reg-shift = <2>;
+			fifo-size = <1>;
+			no-loopback-test;
+
+			status = "disabled";
+		};
+
+		uart1: serial@2100 {
+			compatible = "ns16550a";
+			reg = <0x2100 0x100>;
+
+			clocks = <&lx_clk>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <31>;
+
+			reg-io-width = <1>;
+			reg-shift = <2>;
+			fifo-size = <1>;
+			no-loopback-test;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/tools/relocs.c b/arch/mips/boot/tools/relocs.c
index a88d66c46d7f..9863e1d5c62e 100644
--- a/arch/mips/boot/tools/relocs.c
+++ b/arch/mips/boot/tools/relocs.c
@@ -468,6 +468,8 @@ static void walk_relocs(int (*process)(struct section *sec, Elf_Rel *rel,
 			Elf_Sym *sym, const char *symname))
 {
 	int i;
+	struct section *extab_sec = sec_lookup("__ex_table");
+	int extab_index = extab_sec ? extab_sec - secs : -1;
 
 	/* Walk through the relocations */
 	for (i = 0; i < ehdr.e_shnum; i++) {
@@ -480,6 +482,9 @@ static void walk_relocs(int (*process)(struct section *sec, Elf_Rel *rel,
 		if (sec->shdr.sh_type != SHT_REL_TYPE)
 			continue;
 
+		if (sec->shdr.sh_info == extab_index)
+			continue;
+
 		sec_symtab  = sec->link;
 		sec_applies = &secs[sec->shdr.sh_info];
 		if (!(sec_applies->shdr.sh_flags & SHF_ALLOC))
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 2a5926578841..ab84ede0cbe0 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -11,9 +11,9 @@
 
 obj-y := cpu.o setup.o octeon-platform.o octeon-irq.o csrc-octeon.o
 obj-y += dma-octeon.o
+obj-y += octeon-crypto.o
 obj-y += octeon-memcpy.o
 obj-y += executive/
-obj-y += crypto/
 
 obj-$(CONFIG_MTD)		      += flash_setup.o
 obj-$(CONFIG_SMP)		      += smp.o
diff --git a/arch/mips/cavium-octeon/crypto/Makefile b/arch/mips/cavium-octeon/crypto/Makefile
deleted file mode 100644
index db26c73fa0ed..000000000000
--- a/arch/mips/cavium-octeon/crypto/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# OCTEON-specific crypto modules.
-#
-
-obj-y += octeon-crypto.o
-
-obj-$(CONFIG_CRYPTO_MD5_OCTEON)		+= octeon-md5.o
-obj-$(CONFIG_CRYPTO_SHA1_OCTEON)	+= octeon-sha1.o
-obj-$(CONFIG_CRYPTO_SHA256_OCTEON)	+= octeon-sha256.o
-obj-$(CONFIG_CRYPTO_SHA512_OCTEON)	+= octeon-sha512.o
diff --git a/arch/mips/cavium-octeon/crypto/octeon-md5.c b/arch/mips/cavium-octeon/crypto/octeon-md5.c
deleted file mode 100644
index 5ee4ade99b99..000000000000
--- a/arch/mips/cavium-octeon/crypto/octeon-md5.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Cryptographic API.
- *
- * MD5 Message Digest Algorithm (RFC1321).
- *
- * Adapted for OCTEON by Aaro Koskinen <aaro.koskinen@iki.fi>.
- *
- * Based on crypto/md5.c, which is:
- *
- * Derived from cryptoapi implementation, originally based on the
- * public domain implementation written by Colin Plumb in 1993.
- *
- * Copyright (c) Cryptoapi developers.
- * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <crypto/md5.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
-#include <asm/octeon/octeon.h>
-#include <crypto/internal/hash.h>
-
-#include "octeon-crypto.h"
-
-/*
- * We pass everything as 64-bit. OCTEON can handle misaligned data.
- */
-
-static void octeon_md5_store_hash(struct md5_state *ctx)
-{
-	u64 *hash = (u64 *)ctx->hash;
-
-	write_octeon_64bit_hash_dword(hash[0], 0);
-	write_octeon_64bit_hash_dword(hash[1], 1);
-}
-
-static void octeon_md5_read_hash(struct md5_state *ctx)
-{
-	u64 *hash = (u64 *)ctx->hash;
-
-	hash[0] = read_octeon_64bit_hash_dword(0);
-	hash[1] = read_octeon_64bit_hash_dword(1);
-}
-
-static void octeon_md5_transform(const void *_block)
-{
-	const u64 *block = _block;
-
-	write_octeon_64bit_block_dword(block[0], 0);
-	write_octeon_64bit_block_dword(block[1], 1);
-	write_octeon_64bit_block_dword(block[2], 2);
-	write_octeon_64bit_block_dword(block[3], 3);
-	write_octeon_64bit_block_dword(block[4], 4);
-	write_octeon_64bit_block_dword(block[5], 5);
-	write_octeon_64bit_block_dword(block[6], 6);
-	octeon_md5_start(block[7]);
-}
-
-static int octeon_md5_init(struct shash_desc *desc)
-{
-	struct md5_state *mctx = shash_desc_ctx(desc);
-
-	mctx->hash[0] = MD5_H0;
-	mctx->hash[1] = MD5_H1;
-	mctx->hash[2] = MD5_H2;
-	mctx->hash[3] = MD5_H3;
-	cpu_to_le32_array(mctx->hash, 4);
-	mctx->byte_count = 0;
-
-	return 0;
-}
-
-static int octeon_md5_update(struct shash_desc *desc, const u8 *data,
-			     unsigned int len)
-{
-	struct md5_state *mctx = shash_desc_ctx(desc);
-	const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
-	struct octeon_cop2_state state;
-	unsigned long flags;
-
-	mctx->byte_count += len;
-
-	if (avail > len) {
-		memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
-		       data, len);
-		return 0;
-	}
-
-	memcpy((char *)mctx->block + (sizeof(mctx->block) - avail), data,
-	       avail);
-
-	flags = octeon_crypto_enable(&state);
-	octeon_md5_store_hash(mctx);
-
-	octeon_md5_transform(mctx->block);
-	data += avail;
-	len -= avail;
-
-	while (len >= sizeof(mctx->block)) {
-		octeon_md5_transform(data);
-		data += sizeof(mctx->block);
-		len -= sizeof(mctx->block);
-	}
-
-	octeon_md5_read_hash(mctx);
-	octeon_crypto_disable(&state, flags);
-
-	memcpy(mctx->block, data, len);
-
-	return 0;
-}
-
-static int octeon_md5_final(struct shash_desc *desc, u8 *out)
-{
-	struct md5_state *mctx = shash_desc_ctx(desc);
-	const unsigned int offset = mctx->byte_count & 0x3f;
-	char *p = (char *)mctx->block + offset;
-	int padding = 56 - (offset + 1);
-	struct octeon_cop2_state state;
-	unsigned long flags;
-
-	*p++ = 0x80;
-
-	flags = octeon_crypto_enable(&state);
-	octeon_md5_store_hash(mctx);
-
-	if (padding < 0) {
-		memset(p, 0x00, padding + sizeof(u64));
-		octeon_md5_transform(mctx->block);
-		p = (char *)mctx->block;
-		padding = 56;
-	}
-
-	memset(p, 0, padding);
-	mctx->block[14] = mctx->byte_count << 3;
-	mctx->block[15] = mctx->byte_count >> 29;
-	cpu_to_le32_array(mctx->block + 14, 2);
-	octeon_md5_transform(mctx->block);
-
-	octeon_md5_read_hash(mctx);
-	octeon_crypto_disable(&state, flags);
-
-	memcpy(out, mctx->hash, sizeof(mctx->hash));
-	memset(mctx, 0, sizeof(*mctx));
-
-	return 0;
-}
-
-static int octeon_md5_export(struct shash_desc *desc, void *out)
-{
-	struct md5_state *ctx = shash_desc_ctx(desc);
-
-	memcpy(out, ctx, sizeof(*ctx));
-	return 0;
-}
-
-static int octeon_md5_import(struct shash_desc *desc, const void *in)
-{
-	struct md5_state *ctx = shash_desc_ctx(desc);
-
-	memcpy(ctx, in, sizeof(*ctx));
-	return 0;
-}
-
-static struct shash_alg alg = {
-	.digestsize	=	MD5_DIGEST_SIZE,
-	.init		=	octeon_md5_init,
-	.update		=	octeon_md5_update,
-	.final		=	octeon_md5_final,
-	.export		=	octeon_md5_export,
-	.import		=	octeon_md5_import,
-	.descsize	=	sizeof(struct md5_state),
-	.statesize	=	sizeof(struct md5_state),
-	.base		=	{
-		.cra_name	=	"md5",
-		.cra_driver_name=	"octeon-md5",
-		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
-		.cra_blocksize	=	MD5_HMAC_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-};
-
-static int __init md5_mod_init(void)
-{
-	if (!octeon_has_crypto())
-		return -ENOTSUPP;
-	return crypto_register_shash(&alg);
-}
-
-static void __exit md5_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-module_init(md5_mod_init);
-module_exit(md5_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MD5 Message Digest Algorithm (OCTEON)");
-MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/arch/mips/cavium-octeon/crypto/octeon-sha1.c b/arch/mips/cavium-octeon/crypto/octeon-sha1.c
deleted file mode 100644
index 37a07b3c4568..000000000000
--- a/arch/mips/cavium-octeon/crypto/octeon-sha1.c
+++ /dev/null
@@ -1,223 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cryptographic API.
- *
- * SHA1 Secure Hash Algorithm.
- *
- * Adapted for OCTEON by Aaro Koskinen <aaro.koskinen@iki.fi>.
- *
- * Based on crypto/sha1_generic.c, which is:
- *
- * Copyright (c) Alan Smithee.
- * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
- * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
- */
-
-#include <linux/mm.h>
-#include <crypto/sha1.h>
-#include <crypto/sha1_base.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <asm/byteorder.h>
-#include <asm/octeon/octeon.h>
-#include <crypto/internal/hash.h>
-
-#include "octeon-crypto.h"
-
-/*
- * We pass everything as 64-bit. OCTEON can handle misaligned data.
- */
-
-static void octeon_sha1_store_hash(struct sha1_state *sctx)
-{
-	u64 *hash = (u64 *)sctx->state;
-	union {
-		u32 word[2];
-		u64 dword;
-	} hash_tail = { { sctx->state[4], } };
-
-	write_octeon_64bit_hash_dword(hash[0], 0);
-	write_octeon_64bit_hash_dword(hash[1], 1);
-	write_octeon_64bit_hash_dword(hash_tail.dword, 2);
-	memzero_explicit(&hash_tail.word[0], sizeof(hash_tail.word[0]));
-}
-
-static void octeon_sha1_read_hash(struct sha1_state *sctx)
-{
-	u64 *hash = (u64 *)sctx->state;
-	union {
-		u32 word[2];
-		u64 dword;
-	} hash_tail;
-
-	hash[0]		= read_octeon_64bit_hash_dword(0);
-	hash[1]		= read_octeon_64bit_hash_dword(1);
-	hash_tail.dword	= read_octeon_64bit_hash_dword(2);
-	sctx->state[4]	= hash_tail.word[0];
-	memzero_explicit(&hash_tail.dword, sizeof(hash_tail.dword));
-}
-
-static void octeon_sha1_transform(const void *_block)
-{
-	const u64 *block = _block;
-
-	write_octeon_64bit_block_dword(block[0], 0);
-	write_octeon_64bit_block_dword(block[1], 1);
-	write_octeon_64bit_block_dword(block[2], 2);
-	write_octeon_64bit_block_dword(block[3], 3);
-	write_octeon_64bit_block_dword(block[4], 4);
-	write_octeon_64bit_block_dword(block[5], 5);
-	write_octeon_64bit_block_dword(block[6], 6);
-	octeon_sha1_start(block[7]);
-}
-
-static void __octeon_sha1_update(struct sha1_state *sctx, const u8 *data,
-				 unsigned int len)
-{
-	unsigned int partial;
-	unsigned int done;
-	const u8 *src;
-
-	partial = sctx->count % SHA1_BLOCK_SIZE;
-	sctx->count += len;
-	done = 0;
-	src = data;
-
-	if ((partial + len) >= SHA1_BLOCK_SIZE) {
-		if (partial) {
-			done = -partial;
-			memcpy(sctx->buffer + partial, data,
-			       done + SHA1_BLOCK_SIZE);
-			src = sctx->buffer;
-		}
-
-		do {
-			octeon_sha1_transform(src);
-			done += SHA1_BLOCK_SIZE;
-			src = data + done;
-		} while (done + SHA1_BLOCK_SIZE <= len);
-
-		partial = 0;
-	}
-	memcpy(sctx->buffer + partial, src, len - done);
-}
-
-static int octeon_sha1_update(struct shash_desc *desc, const u8 *data,
-			unsigned int len)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-	struct octeon_cop2_state state;
-	unsigned long flags;
-
-	/*
-	 * Small updates never reach the crypto engine, so the generic sha1 is
-	 * faster because of the heavyweight octeon_crypto_enable() /
-	 * octeon_crypto_disable().
-	 */
-	if ((sctx->count % SHA1_BLOCK_SIZE) + len < SHA1_BLOCK_SIZE)
-		return crypto_sha1_update(desc, data, len);
-
-	flags = octeon_crypto_enable(&state);
-	octeon_sha1_store_hash(sctx);
-
-	__octeon_sha1_update(sctx, data, len);
-
-	octeon_sha1_read_hash(sctx);
-	octeon_crypto_disable(&state, flags);
-
-	return 0;
-}
-
-static int octeon_sha1_final(struct shash_desc *desc, u8 *out)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-	static const u8 padding[64] = { 0x80, };
-	struct octeon_cop2_state state;
-	__be32 *dst = (__be32 *)out;
-	unsigned int pad_len;
-	unsigned long flags;
-	unsigned int index;
-	__be64 bits;
-	int i;
-
-	/* Save number of bits. */
-	bits = cpu_to_be64(sctx->count << 3);
-
-	/* Pad out to 56 mod 64. */
-	index = sctx->count & 0x3f;
-	pad_len = (index < 56) ? (56 - index) : ((64+56) - index);
-
-	flags = octeon_crypto_enable(&state);
-	octeon_sha1_store_hash(sctx);
-
-	__octeon_sha1_update(sctx, padding, pad_len);
-
-	/* Append length (before padding). */
-	__octeon_sha1_update(sctx, (const u8 *)&bits, sizeof(bits));
-
-	octeon_sha1_read_hash(sctx);
-	octeon_crypto_disable(&state, flags);
-
-	/* Store state in digest */
-	for (i = 0; i < 5; i++)
-		dst[i] = cpu_to_be32(sctx->state[i]);
-
-	/* Zeroize sensitive information. */
-	memset(sctx, 0, sizeof(*sctx));
-
-	return 0;
-}
-
-static int octeon_sha1_export(struct shash_desc *desc, void *out)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, sctx, sizeof(*sctx));
-	return 0;
-}
-
-static int octeon_sha1_import(struct shash_desc *desc, const void *in)
-{
-	struct sha1_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(sctx, in, sizeof(*sctx));
-	return 0;
-}
-
-static struct shash_alg octeon_sha1_alg = {
-	.digestsize	=	SHA1_DIGEST_SIZE,
-	.init		=	sha1_base_init,
-	.update		=	octeon_sha1_update,
-	.final		=	octeon_sha1_final,
-	.export		=	octeon_sha1_export,
-	.import		=	octeon_sha1_import,
-	.descsize	=	sizeof(struct sha1_state),
-	.statesize	=	sizeof(struct sha1_state),
-	.base		=	{
-		.cra_name	=	"sha1",
-		.cra_driver_name=	"octeon-sha1",
-		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
-		.cra_blocksize	=	SHA1_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-};
-
-static int __init octeon_sha1_mod_init(void)
-{
-	if (!octeon_has_crypto())
-		return -ENOTSUPP;
-	return crypto_register_shash(&octeon_sha1_alg);
-}
-
-static void __exit octeon_sha1_mod_fini(void)
-{
-	crypto_unregister_shash(&octeon_sha1_alg);
-}
-
-module_init(octeon_sha1_mod_init);
-module_exit(octeon_sha1_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm (OCTEON)");
-MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/arch/mips/cavium-octeon/crypto/octeon-sha256.c b/arch/mips/cavium-octeon/crypto/octeon-sha256.c
deleted file mode 100644
index 435e4a6e7f13..000000000000
--- a/arch/mips/cavium-octeon/crypto/octeon-sha256.c
+++ /dev/null
@@ -1,241 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cryptographic API.
- *
- * SHA-224 and SHA-256 Secure Hash Algorithm.
- *
- * Adapted for OCTEON by Aaro Koskinen <aaro.koskinen@iki.fi>.
- *
- * Based on crypto/sha256_generic.c, which is:
- *
- * Copyright (c) Jean-Luc Cooke <jlcooke@certainkey.com>
- * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
- * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
- * SHA224 Support Copyright 2007 Intel Corporation <jonathan.lynch@intel.com>
- */
-
-#include <linux/mm.h>
-#include <crypto/sha2.h>
-#include <crypto/sha256_base.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <asm/byteorder.h>
-#include <asm/octeon/octeon.h>
-#include <crypto/internal/hash.h>
-
-#include "octeon-crypto.h"
-
-/*
- * We pass everything as 64-bit. OCTEON can handle misaligned data.
- */
-
-static void octeon_sha256_store_hash(struct sha256_state *sctx)
-{
-	u64 *hash = (u64 *)sctx->state;
-
-	write_octeon_64bit_hash_dword(hash[0], 0);
-	write_octeon_64bit_hash_dword(hash[1], 1);
-	write_octeon_64bit_hash_dword(hash[2], 2);
-	write_octeon_64bit_hash_dword(hash[3], 3);
-}
-
-static void octeon_sha256_read_hash(struct sha256_state *sctx)
-{
-	u64 *hash = (u64 *)sctx->state;
-
-	hash[0] = read_octeon_64bit_hash_dword(0);
-	hash[1] = read_octeon_64bit_hash_dword(1);
-	hash[2] = read_octeon_64bit_hash_dword(2);
-	hash[3] = read_octeon_64bit_hash_dword(3);
-}
-
-static void octeon_sha256_transform(const void *_block)
-{
-	const u64 *block = _block;
-
-	write_octeon_64bit_block_dword(block[0], 0);
-	write_octeon_64bit_block_dword(block[1], 1);
-	write_octeon_64bit_block_dword(block[2], 2);
-	write_octeon_64bit_block_dword(block[3], 3);
-	write_octeon_64bit_block_dword(block[4], 4);
-	write_octeon_64bit_block_dword(block[5], 5);
-	write_octeon_64bit_block_dword(block[6], 6);
-	octeon_sha256_start(block[7]);
-}
-
-static void __octeon_sha256_update(struct sha256_state *sctx, const u8 *data,
-				   unsigned int len)
-{
-	unsigned int partial;
-	unsigned int done;
-	const u8 *src;
-
-	partial = sctx->count % SHA256_BLOCK_SIZE;
-	sctx->count += len;
-	done = 0;
-	src = data;
-
-	if ((partial + len) >= SHA256_BLOCK_SIZE) {
-		if (partial) {
-			done = -partial;
-			memcpy(sctx->buf + partial, data,
-			       done + SHA256_BLOCK_SIZE);
-			src = sctx->buf;
-		}
-
-		do {
-			octeon_sha256_transform(src);
-			done += SHA256_BLOCK_SIZE;
-			src = data + done;
-		} while (done + SHA256_BLOCK_SIZE <= len);
-
-		partial = 0;
-	}
-	memcpy(sctx->buf + partial, src, len - done);
-}
-
-static int octeon_sha256_update(struct shash_desc *desc, const u8 *data,
-				unsigned int len)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-	struct octeon_cop2_state state;
-	unsigned long flags;
-
-	/*
-	 * Small updates never reach the crypto engine, so the generic sha256 is
-	 * faster because of the heavyweight octeon_crypto_enable() /
-	 * octeon_crypto_disable().
-	 */
-	if ((sctx->count % SHA256_BLOCK_SIZE) + len < SHA256_BLOCK_SIZE)
-		return crypto_sha256_update(desc, data, len);
-
-	flags = octeon_crypto_enable(&state);
-	octeon_sha256_store_hash(sctx);
-
-	__octeon_sha256_update(sctx, data, len);
-
-	octeon_sha256_read_hash(sctx);
-	octeon_crypto_disable(&state, flags);
-
-	return 0;
-}
-
-static int octeon_sha256_final(struct shash_desc *desc, u8 *out)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-	static const u8 padding[64] = { 0x80, };
-	struct octeon_cop2_state state;
-	__be32 *dst = (__be32 *)out;
-	unsigned int pad_len;
-	unsigned long flags;
-	unsigned int index;
-	__be64 bits;
-	int i;
-
-	/* Save number of bits. */
-	bits = cpu_to_be64(sctx->count << 3);
-
-	/* Pad out to 56 mod 64. */
-	index = sctx->count & 0x3f;
-	pad_len = (index < 56) ? (56 - index) : ((64+56) - index);
-
-	flags = octeon_crypto_enable(&state);
-	octeon_sha256_store_hash(sctx);
-
-	__octeon_sha256_update(sctx, padding, pad_len);
-
-	/* Append length (before padding). */
-	__octeon_sha256_update(sctx, (const u8 *)&bits, sizeof(bits));
-
-	octeon_sha256_read_hash(sctx);
-	octeon_crypto_disable(&state, flags);
-
-	/* Store state in digest */
-	for (i = 0; i < 8; i++)
-		dst[i] = cpu_to_be32(sctx->state[i]);
-
-	/* Zeroize sensitive information. */
-	memset(sctx, 0, sizeof(*sctx));
-
-	return 0;
-}
-
-static int octeon_sha224_final(struct shash_desc *desc, u8 *hash)
-{
-	u8 D[SHA256_DIGEST_SIZE];
-
-	octeon_sha256_final(desc, D);
-
-	memcpy(hash, D, SHA224_DIGEST_SIZE);
-	memzero_explicit(D, SHA256_DIGEST_SIZE);
-
-	return 0;
-}
-
-static int octeon_sha256_export(struct shash_desc *desc, void *out)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(out, sctx, sizeof(*sctx));
-	return 0;
-}
-
-static int octeon_sha256_import(struct shash_desc *desc, const void *in)
-{
-	struct sha256_state *sctx = shash_desc_ctx(desc);
-
-	memcpy(sctx, in, sizeof(*sctx));
-	return 0;
-}
-
-static struct shash_alg octeon_sha256_algs[2] = { {
-	.digestsize	=	SHA256_DIGEST_SIZE,
-	.init		=	sha256_base_init,
-	.update		=	octeon_sha256_update,
-	.final		=	octeon_sha256_final,
-	.export		=	octeon_sha256_export,
-	.import		=	octeon_sha256_import,
-	.descsize	=	sizeof(struct sha256_state),
-	.statesize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha256",
-		.cra_driver_name=	"octeon-sha256",
-		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
-		.cra_blocksize	=	SHA256_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-}, {
-	.digestsize	=	SHA224_DIGEST_SIZE,
-	.init		=	sha224_base_init,
-	.update		=	octeon_sha256_update,
-	.final		=	octeon_sha224_final,
-	.descsize	=	sizeof(struct sha256_state),
-	.base		=	{
-		.cra_name	=	"sha224",
-		.cra_driver_name=	"octeon-sha224",
-		.cra_blocksize	=	SHA224_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-} };
-
-static int __init octeon_sha256_mod_init(void)
-{
-	if (!octeon_has_crypto())
-		return -ENOTSUPP;
-	return crypto_register_shashes(octeon_sha256_algs,
-				       ARRAY_SIZE(octeon_sha256_algs));
-}
-
-static void __exit octeon_sha256_mod_fini(void)
-{
-	crypto_unregister_shashes(octeon_sha256_algs,
-				  ARRAY_SIZE(octeon_sha256_algs));
-}
-
-module_init(octeon_sha256_mod_init);
-module_exit(octeon_sha256_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm (OCTEON)");
-MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/arch/mips/cavium-octeon/crypto/octeon-sha512.c b/arch/mips/cavium-octeon/crypto/octeon-sha512.c
deleted file mode 100644
index 2dee9354e33f..000000000000
--- a/arch/mips/cavium-octeon/crypto/octeon-sha512.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cryptographic API.
- *
- * SHA-512 and SHA-384 Secure Hash Algorithm.
- *
- * Adapted for OCTEON by Aaro Koskinen <aaro.koskinen@iki.fi>.
- *
- * Based on crypto/sha512_generic.c, which is:
- *
- * Copyright (c) Jean-Luc Cooke <jlcooke@certainkey.com>
- * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
- * Copyright (c) 2003 Kyle McMartin <kyle@debian.org>
- */
-
-#include <linux/mm.h>
-#include <crypto/sha2.h>
-#include <crypto/sha512_base.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <asm/byteorder.h>
-#include <asm/octeon/octeon.h>
-#include <crypto/internal/hash.h>
-
-#include "octeon-crypto.h"
-
-/*
- * We pass everything as 64-bit. OCTEON can handle misaligned data.
- */
-
-static void octeon_sha512_store_hash(struct sha512_state *sctx)
-{
-	write_octeon_64bit_hash_sha512(sctx->state[0], 0);
-	write_octeon_64bit_hash_sha512(sctx->state[1], 1);
-	write_octeon_64bit_hash_sha512(sctx->state[2], 2);
-	write_octeon_64bit_hash_sha512(sctx->state[3], 3);
-	write_octeon_64bit_hash_sha512(sctx->state[4], 4);
-	write_octeon_64bit_hash_sha512(sctx->state[5], 5);
-	write_octeon_64bit_hash_sha512(sctx->state[6], 6);
-	write_octeon_64bit_hash_sha512(sctx->state[7], 7);
-}
-
-static void octeon_sha512_read_hash(struct sha512_state *sctx)
-{
-	sctx->state[0] = read_octeon_64bit_hash_sha512(0);
-	sctx->state[1] = read_octeon_64bit_hash_sha512(1);
-	sctx->state[2] = read_octeon_64bit_hash_sha512(2);
-	sctx->state[3] = read_octeon_64bit_hash_sha512(3);
-	sctx->state[4] = read_octeon_64bit_hash_sha512(4);
-	sctx->state[5] = read_octeon_64bit_hash_sha512(5);
-	sctx->state[6] = read_octeon_64bit_hash_sha512(6);
-	sctx->state[7] = read_octeon_64bit_hash_sha512(7);
-}
-
-static void octeon_sha512_transform(const void *_block)
-{
-	const u64 *block = _block;
-
-	write_octeon_64bit_block_sha512(block[0], 0);
-	write_octeon_64bit_block_sha512(block[1], 1);
-	write_octeon_64bit_block_sha512(block[2], 2);
-	write_octeon_64bit_block_sha512(block[3], 3);
-	write_octeon_64bit_block_sha512(block[4], 4);
-	write_octeon_64bit_block_sha512(block[5], 5);
-	write_octeon_64bit_block_sha512(block[6], 6);
-	write_octeon_64bit_block_sha512(block[7], 7);
-	write_octeon_64bit_block_sha512(block[8], 8);
-	write_octeon_64bit_block_sha512(block[9], 9);
-	write_octeon_64bit_block_sha512(block[10], 10);
-	write_octeon_64bit_block_sha512(block[11], 11);
-	write_octeon_64bit_block_sha512(block[12], 12);
-	write_octeon_64bit_block_sha512(block[13], 13);
-	write_octeon_64bit_block_sha512(block[14], 14);
-	octeon_sha512_start(block[15]);
-}
-
-static void __octeon_sha512_update(struct sha512_state *sctx, const u8 *data,
-				   unsigned int len)
-{
-	unsigned int part_len;
-	unsigned int index;
-	unsigned int i;
-
-	/* Compute number of bytes mod 128. */
-	index = sctx->count[0] % SHA512_BLOCK_SIZE;
-
-	/* Update number of bytes. */
-	if ((sctx->count[0] += len) < len)
-		sctx->count[1]++;
-
-	part_len = SHA512_BLOCK_SIZE - index;
-
-	/* Transform as many times as possible. */
-	if (len >= part_len) {
-		memcpy(&sctx->buf[index], data, part_len);
-		octeon_sha512_transform(sctx->buf);
-
-		for (i = part_len; i + SHA512_BLOCK_SIZE <= len;
-			i += SHA512_BLOCK_SIZE)
-			octeon_sha512_transform(&data[i]);
-
-		index = 0;
-	} else {
-		i = 0;
-	}
-
-	/* Buffer remaining input. */
-	memcpy(&sctx->buf[index], &data[i], len - i);
-}
-
-static int octeon_sha512_update(struct shash_desc *desc, const u8 *data,
-				unsigned int len)
-{
-	struct sha512_state *sctx = shash_desc_ctx(desc);
-	struct octeon_cop2_state state;
-	unsigned long flags;
-
-	/*
-	 * Small updates never reach the crypto engine, so the generic sha512 is
-	 * faster because of the heavyweight octeon_crypto_enable() /
-	 * octeon_crypto_disable().
-	 */
-	if ((sctx->count[0] % SHA512_BLOCK_SIZE) + len < SHA512_BLOCK_SIZE)
-		return crypto_sha512_update(desc, data, len);
-
-	flags = octeon_crypto_enable(&state);
-	octeon_sha512_store_hash(sctx);
-
-	__octeon_sha512_update(sctx, data, len);
-
-	octeon_sha512_read_hash(sctx);
-	octeon_crypto_disable(&state, flags);
-
-	return 0;
-}
-
-static int octeon_sha512_final(struct shash_desc *desc, u8 *hash)
-{
-	struct sha512_state *sctx = shash_desc_ctx(desc);
-	static u8 padding[128] = { 0x80, };
-	struct octeon_cop2_state state;
-	__be64 *dst = (__be64 *)hash;
-	unsigned int pad_len;
-	unsigned long flags;
-	unsigned int index;
-	__be64 bits[2];
-	int i;
-
-	/* Save number of bits. */
-	bits[1] = cpu_to_be64(sctx->count[0] << 3);
-	bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61);
-
-	/* Pad out to 112 mod 128. */
-	index = sctx->count[0] & 0x7f;
-	pad_len = (index < 112) ? (112 - index) : ((128+112) - index);
-
-	flags = octeon_crypto_enable(&state);
-	octeon_sha512_store_hash(sctx);
-
-	__octeon_sha512_update(sctx, padding, pad_len);
-
-	/* Append length (before padding). */
-	__octeon_sha512_update(sctx, (const u8 *)bits, sizeof(bits));
-
-	octeon_sha512_read_hash(sctx);
-	octeon_crypto_disable(&state, flags);
-
-	/* Store state in digest. */
-	for (i = 0; i < 8; i++)
-		dst[i] = cpu_to_be64(sctx->state[i]);
-
-	/* Zeroize sensitive information. */
-	memset(sctx, 0, sizeof(struct sha512_state));
-
-	return 0;
-}
-
-static int octeon_sha384_final(struct shash_desc *desc, u8 *hash)
-{
-	u8 D[64];
-
-	octeon_sha512_final(desc, D);
-
-	memcpy(hash, D, 48);
-	memzero_explicit(D, 64);
-
-	return 0;
-}
-
-static struct shash_alg octeon_sha512_algs[2] = { {
-	.digestsize	=	SHA512_DIGEST_SIZE,
-	.init		=	sha512_base_init,
-	.update		=	octeon_sha512_update,
-	.final		=	octeon_sha512_final,
-	.descsize	=	sizeof(struct sha512_state),
-	.base		=	{
-		.cra_name	=	"sha512",
-		.cra_driver_name=	"octeon-sha512",
-		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
-		.cra_blocksize	=	SHA512_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-}, {
-	.digestsize	=	SHA384_DIGEST_SIZE,
-	.init		=	sha384_base_init,
-	.update		=	octeon_sha512_update,
-	.final		=	octeon_sha384_final,
-	.descsize	=	sizeof(struct sha512_state),
-	.base		=	{
-		.cra_name	=	"sha384",
-		.cra_driver_name=	"octeon-sha384",
-		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
-		.cra_blocksize	=	SHA384_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-} };
-
-static int __init octeon_sha512_mod_init(void)
-{
-	if (!octeon_has_crypto())
-		return -ENOTSUPP;
-	return crypto_register_shashes(octeon_sha512_algs,
-				       ARRAY_SIZE(octeon_sha512_algs));
-}
-
-static void __exit octeon_sha512_mod_fini(void)
-{
-	crypto_unregister_shashes(octeon_sha512_algs,
-				  ARRAY_SIZE(octeon_sha512_algs));
-}
-
-module_init(octeon_sha512_mod_init);
-module_exit(octeon_sha512_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("SHA-512 and SHA-384 Secure Hash Algorithms (OCTEON)");
-MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/arch/mips/cavium-octeon/executive/octeon-model.c b/arch/mips/cavium-octeon/executive/octeon-model.c
index 657dbad9644e..98996cc0857e 100644
--- a/arch/mips/cavium-octeon/executive/octeon-model.c
+++ b/arch/mips/cavium-octeon/executive/octeon-model.c
@@ -25,6 +25,7 @@
  * Contact Cavium Networks for more information
  ***********************license end**************************************/
 
+#include <linux/string.h>
 #include <asm/octeon/octeon.h>
 
 enum octeon_feature_bits __octeon_feature_bits __read_mostly;
@@ -208,16 +209,16 @@ static const char *__init octeon_model_get_string_buffer(uint32_t chip_id,
 		 */
 		switch (chip_id & 0xf) {
 		case 0:
-			strcpy(pass, "1.X");
+			strscpy(pass, "1.X");
 			break;
 		case 1:
-			strcpy(pass, "2.X");
+			strscpy(pass, "2.X");
 			break;
 		case 3:
-			strcpy(pass, "3.X");
+			strscpy(pass, "3.X");
 			break;
 		default:
-			strcpy(pass, "X.X");
+			strscpy(pass, "X.X");
 			break;
 		}
 		break;
@@ -232,13 +233,13 @@ static const char *__init octeon_model_get_string_buffer(uint32_t chip_id,
 		 */
 		switch (chip_id & 0xf) {
 		case 0:
-			strcpy(pass, "1.0");
+			strscpy(pass, "1.0");
 			break;
 		case 2:
-			strcpy(pass, "1.1");
+			strscpy(pass, "1.1");
 			break;
 		default:
-			strcpy(pass, "X.X");
+			strscpy(pass, "X.X");
 			break;
 		}
 		break;
@@ -253,13 +254,13 @@ static const char *__init octeon_model_get_string_buffer(uint32_t chip_id,
 		 */
 		switch (chip_id & 0xf) {
 		case 0:
-			strcpy(pass, "1.0");
+			strscpy(pass, "1.0");
 			break;
 		case 2:
-			strcpy(pass, "1.1");
+			strscpy(pass, "1.1");
 			break;
 		default:
-			strcpy(pass, "X.X");
+			strscpy(pass, "X.X");
 			break;
 		}
 		break;
@@ -273,16 +274,16 @@ static const char *__init octeon_model_get_string_buffer(uint32_t chip_id,
 		if ((chip_id & 0xFF) < 0x8) {
 			switch (chip_id & 0x3) {
 			case 0:
-				strcpy(pass, "1.0");
+				strscpy(pass, "1.0");
 				break;
 			case 1:
-				strcpy(pass, "1.1");
+				strscpy(pass, "1.1");
 				break;
 			case 3:
-				strcpy(pass, "1.2");
+				strscpy(pass, "1.2");
 				break;
 			default:
-				strcpy(pass, "1.X");
+				strscpy(pass, "1.X");
 				break;
 			}
 		}
@@ -447,7 +448,7 @@ static const char *__init octeon_model_get_string_buffer(uint32_t chip_id,
 	default:
 		family = "XX";
 		core_model = "XX";
-		strcpy(pass, "X.X");
+		strscpy(pass, "X.X");
 		suffix = "XXX";
 		break;
 	}
diff --git a/arch/mips/cavium-octeon/crypto/octeon-crypto.c b/arch/mips/cavium-octeon/octeon-crypto.c
index cfb4a146cf17..0ff8559391f5 100644
--- a/arch/mips/cavium-octeon/crypto/octeon-crypto.c
+++ b/arch/mips/cavium-octeon/octeon-crypto.c
@@ -7,12 +7,11 @@
  */
 
 #include <asm/cop2.h>
+#include <asm/octeon/crypto.h>
 #include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/sched/task_stack.h>
 
-#include "octeon-crypto.h"
-
 /**
  * Enable access to Octeon's COP2 crypto hardware for kernel use. Wrap any
  * crypto operations in calls to octeon_crypto_enable/disable in order to make
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 8425a6b38aa2..5c3de175ef5b 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -1503,9 +1503,9 @@ static int __init octeon_irq_init_ciu(
 	/* Mips internal */
 	octeon_irq_init_core();
 
-	ciu_domain = irq_domain_add_tree(
-		ciu_node, &octeon_irq_domain_ciu_ops, dd);
-	irq_set_default_host(ciu_domain);
+	ciu_domain = irq_domain_create_tree(of_fwnode_handle(ciu_node), &octeon_irq_domain_ciu_ops,
+					    dd);
+	irq_set_default_domain(ciu_domain);
 
 	/* CIU_0 */
 	for (i = 0; i < 16; i++) {
@@ -1637,8 +1637,8 @@ static int __init octeon_irq_init_gpio(
 	if (gpiod) {
 		/* gpio domain host_data is the base hwirq number. */
 		gpiod->base_hwirq = base_hwirq;
-		irq_domain_add_linear(
-			gpio_node, 16, &octeon_irq_domain_gpio_ops, gpiod);
+		irq_domain_create_linear(of_fwnode_handle(gpio_node), 16,
+					 &octeon_irq_domain_gpio_ops, gpiod);
 	} else {
 		pr_warn("Cannot allocate memory for GPIO irq_domain.\n");
 		return -ENOMEM;
@@ -2074,9 +2074,9 @@ static int __init octeon_irq_init_ciu2(
 	/* Mips internal */
 	octeon_irq_init_core();
 
-	ciu_domain = irq_domain_add_tree(
-		ciu_node, &octeon_irq_domain_ciu2_ops, NULL);
-	irq_set_default_host(ciu_domain);
+	ciu_domain = irq_domain_create_tree(of_fwnode_handle(ciu_node), &octeon_irq_domain_ciu2_ops,
+					    NULL);
+	irq_set_default_domain(ciu_domain);
 
 	/* CUI2 */
 	for (i = 0; i < 64; i++) {
@@ -2331,11 +2331,12 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 	}
 	host_data->max_bits = val;
 
-	cib_domain = irq_domain_add_linear(ciu_node, host_data->max_bits,
-					   &octeon_irq_domain_cib_ops,
-					   host_data);
+	cib_domain = irq_domain_create_linear(of_fwnode_handle(ciu_node),
+					      host_data->max_bits,
+					      &octeon_irq_domain_cib_ops,
+					      host_data);
 	if (!cib_domain) {
-		pr_err("ERROR: Couldn't irq_domain_add_linear()\n");
+		pr_err("ERROR: Couldn't irq_domain_create_linear()\n");
 		return -ENOMEM;
 	}
 
@@ -2918,8 +2919,8 @@ static int __init octeon_irq_init_ciu3(struct device_node *ciu_node,
 	 * Initialize all domains to use the default domain. Specific major
 	 * blocks will overwrite the default domain as needed.
 	 */
-	domain = irq_domain_add_tree(ciu_node, &octeon_dflt_domain_ciu3_ops,
-				     ciu3_info);
+	domain = irq_domain_create_tree(of_fwnode_handle(ciu_node), &octeon_dflt_domain_ciu3_ops,
+					ciu3_info);
 	for (i = 0; i < MAX_CIU3_DOMAINS; i++)
 		ciu3_info->domain[i] = domain;
 
@@ -2929,7 +2930,7 @@ static int __init octeon_irq_init_ciu3(struct device_node *ciu_node,
 		/* Only do per CPU things if it is the CIU of the boot node. */
 		octeon_irq_ciu3_alloc_resources(ciu3_info);
 		if (node == 0)
-			irq_set_default_host(domain);
+			irq_set_default_domain(domain);
 
 		octeon_irq_use_ip4 = false;
 		/* Enable the CIU lines */
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index 5e1dd4e6e82f..47677b5d7ed0 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -13,6 +13,7 @@
 #include <linux/of_fdt.h>
 #include <linux/platform_device.h>
 #include <linux/libfdt.h>
+#include <linux/string.h>
 
 #include <asm/octeon/octeon.h>
 #include <asm/octeon/cvmx-helper-board.h>
@@ -538,8 +539,7 @@ static void __init octeon_fdt_set_phy(int eth, int phy_addr)
 
 	if (octeon_has_88e1145()) {
 		fdt_nop_property(initial_boot_params, phy, "marvell,reg-init");
-		memset(new_name, 0, sizeof(new_name));
-		strcpy(new_name, "marvell,88e1145");
+		strscpy_pad(new_name, "marvell,88e1145");
 		p = fdt_getprop(initial_boot_params, phy, "compatible",
 				&current_len);
 		if (p && current_len >= strlen(new_name))
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 08ea2cde1eb5..054e331b3202 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -334,7 +334,7 @@ static void octeon_cpu_die(unsigned int cpu)
 		new_mask = *p;
 	}
 
-	pr_info("Reset core %d. Available Coremask = 0x%x \n", coreid, new_mask);
+	pr_info("Reset core %d. Available Coremask = 0x%x\n", coreid, new_mask);
 	mb();
 	cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid);
 	cvmx_write_csr(CVMX_CIU_PP_RST, 0);
diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig
index 8caa03a41327..cba0b85c6707 100644
--- a/arch/mips/configs/ath79_defconfig
+++ b/arch/mips/configs/ath79_defconfig
@@ -82,7 +82,6 @@ CONFIG_LEDS_GPIO=y
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_CRC_ITU_T=m
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index 6a68a96d13f8..d10b3d4adbd1 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -51,7 +51,6 @@ CONFIG_B43LEGACY=y
 CONFIG_BRCMSMAC=y
 CONFIG_ISDN=y
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
@@ -69,7 +68,6 @@ CONFIG_USB_HCD_BCMA=y
 CONFIG_USB_HCD_SSB=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_CRC32_SARWATE=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_INFO_REDUCED=y
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index e463a9acae03..349e9e0b4f54 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -81,7 +81,6 @@ CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
 CONFIG_IP_VS_FTP=m
-CONFIG_IP_DCCP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
@@ -145,9 +144,9 @@ CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_EXT4_FS=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
@@ -222,7 +221,6 @@ CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
@@ -239,8 +237,6 @@ CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m
-CONFIG_CRC_T10DIF=m
-CONFIG_CRC7=m
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DETECT_HUNG_TASK=y
diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig
index cd0dc37c3d84..ecfa7f777efa 100644
--- a/arch/mips/configs/bmips_stb_defconfig
+++ b/arch/mips/configs/bmips_stb_defconfig
@@ -119,7 +119,6 @@ CONFIG_INPUT_UINPUT=y
 CONFIG_VT=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
diff --git a/arch/mips/configs/cavium_octeon_defconfig b/arch/mips/configs/cavium_octeon_defconfig
index f523ee6f25bf..68c363366bce 100644
--- a/arch/mips/configs/cavium_octeon_defconfig
+++ b/arch/mips/configs/cavium_octeon_defconfig
@@ -155,10 +155,6 @@ CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5_OCTEON=y
-CONFIG_CRYPTO_SHA1_OCTEON=m
-CONFIG_CRYPTO_SHA256_OCTEON=m
-CONFIG_CRYPTO_SHA512_OCTEON=m
 CONFIG_CRYPTO_DES=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index e835730ea7fa..6ee9ee391fdc 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -59,9 +59,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -70,4 +70,3 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3_ACL=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/mips/configs/db1xxx_defconfig b/arch/mips/configs/db1xxx_defconfig
index 6eff21ff15d5..281dd7d0f805 100644
--- a/arch/mips/configs/db1xxx_defconfig
+++ b/arch/mips/configs/db1xxx_defconfig
@@ -216,7 +216,6 @@ CONFIG_CRYPTO_USER=y
 CONFIG_CRYPTO_CRYPTD=y
 CONFIG_CRYPTO_USER_API_HASH=y
 CONFIG_CRYPTO_USER_API_SKCIPHER=y
-CONFIG_CRC32_SLICEBY4=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/mips/configs/decstation_64_defconfig b/arch/mips/configs/decstation_64_defconfig
index 92a1d0aea38c..dad98c575292 100644
--- a/arch/mips/configs/decstation_64_defconfig
+++ b/arch/mips/configs/decstation_64_defconfig
@@ -133,9 +133,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_PROC_KCORE=y
@@ -168,7 +168,6 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
 CONFIG_CRYPTO_RSA=m
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
@@ -177,12 +176,9 @@ CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_OFB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_CRC32=m
-CONFIG_CRYPTO_CRCT10DIF=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
@@ -204,7 +200,6 @@ CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index db214fcebcbe..4e1b51a4ad90 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -129,9 +129,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_PROC_KCORE=y
@@ -163,7 +163,6 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
 CONFIG_CRYPTO_RSA=m
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
@@ -172,12 +171,9 @@ CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_OFB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_CRC32=m
-CONFIG_CRYPTO_CRCT10DIF=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
@@ -199,7 +195,6 @@ CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/decstation_r4k_defconfig b/arch/mips/configs/decstation_r4k_defconfig
index 15b769e96d5b..4e550dffc23d 100644
--- a/arch/mips/configs/decstation_r4k_defconfig
+++ b/arch/mips/configs/decstation_r4k_defconfig
@@ -129,9 +129,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_PROC_KCORE=y
@@ -163,7 +163,6 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
 CONFIG_CRYPTO_RSA=m
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
@@ -172,12 +171,9 @@ CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_OFB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_CRC32=m
-CONFIG_CRYPTO_CRCT10DIF=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD160=m
@@ -199,7 +195,6 @@ CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
-CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_DRBG_HASH=y
 CONFIG_CRYPTO_DRBG_CTR=y
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/eyeq5_defconfig b/arch/mips/configs/eyeq5_defconfig
index ae9a09b16e40..6688f56aba1c 100644
--- a/arch/mips/configs/eyeq5_defconfig
+++ b/arch/mips/configs/eyeq5_defconfig
@@ -19,20 +19,18 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_EYEQ=y
-CONFIG_MACH_EYEQ5=y
 CONFIG_FIT_IMAGE_FDT_EPM5=y
-CONFIG_PAGE_SIZE_16KB=y
 CONFIG_MIPS_CPS=y
 CONFIG_CPU_HAS_MSA=y
 CONFIG_NR_CPUS=16
 CONFIG_MIPS_RAW_APPENDED_DTB=y
 CONFIG_JUMP_LABEL=y
+CONFIG_PAGE_SIZE_16KB=y
 CONFIG_COMPAT_32BIT_TIME=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_TRIM_UNUSED_KSYMS=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_USERFAULTFD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -64,8 +62,14 @@ CONFIG_CAN_M_CAN=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_NOMADIK=y
 # CONFIG_PTP_1588_CLOCK is not set
 CONFIG_PINCTRL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_NOMADIK=y
+CONFIG_SENSORS_LM75=y
 CONFIG_MFD_SYSCON=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_BELKIN=y
@@ -79,6 +83,8 @@ CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_CADENCE=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_RESET_CONTROLLER=y
 # CONFIG_NVMEM is not set
@@ -99,7 +105,6 @@ CONFIG_NFS_V4=y
 CONFIG_NFS_V4_1=y
 CONFIG_NFS_V4_2=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_CRC32_MIPS=y
 CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_RCU_TRACE is not set
diff --git a/arch/mips/configs/eyeq6_defconfig b/arch/mips/configs/eyeq6_defconfig
index 6597d5e88b33..0a00a201937b 100644
--- a/arch/mips/configs/eyeq6_defconfig
+++ b/arch/mips/configs/eyeq6_defconfig
@@ -82,6 +82,8 @@ CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_CADENCE=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_RESET_CONTROLLER=y
 # CONFIG_NVMEM is not set
@@ -102,7 +104,6 @@ CONFIG_NFS_V4=y
 CONFIG_NFS_V4_1=y
 CONFIG_NFS_V4_2=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_CRC32_MIPS=y
 CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_RCU_TRACE is not set
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index 00329bb5de5a..b6fe3c962464 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -44,7 +44,6 @@ CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
@@ -174,7 +173,7 @@ CONFIG_USB_ISIGHTFW=m
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
 CONFIG_AUTOFS_FS=y
@@ -218,5 +217,3 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC7=m
diff --git a/arch/mips/configs/gcw0_defconfig b/arch/mips/configs/gcw0_defconfig
index bc1ef66e3999..fda9971bdd8d 100644
--- a/arch/mips/configs/gcw0_defconfig
+++ b/arch/mips/configs/gcw0_defconfig
@@ -13,7 +13,6 @@ CONFIG_MIPS_CMDLINE_DTB_EXTEND=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BOUNCE is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -53,7 +52,6 @@ CONFIG_INPUT_UINPUT=y
 CONFIG_INPUT_PWM_VIBRA=y
 # CONFIG_SERIO is not set
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_INGENIC=y
 CONFIG_HW_RANDOM=y
diff --git a/arch/mips/configs/generic/32r6.config b/arch/mips/configs/generic/32r6.config
index 1a5d5ea4ab2b..ca606e71f4d0 100644
--- a/arch/mips/configs/generic/32r6.config
+++ b/arch/mips/configs/generic/32r6.config
@@ -1,4 +1,2 @@
 CONFIG_CPU_MIPS32_R6=y
 CONFIG_HIGHMEM=y
-
-CONFIG_CRYPTO_CRC32_MIPS=y
diff --git a/arch/mips/configs/generic/64r6.config b/arch/mips/configs/generic/64r6.config
index 63b4e95f303d..23a300914957 100644
--- a/arch/mips/configs/generic/64r6.config
+++ b/arch/mips/configs/generic/64r6.config
@@ -4,5 +4,4 @@ CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 
 CONFIG_CPU_HAS_MSA=y
-CONFIG_CRYPTO_CRC32_MIPS=y
 CONFIG_VIRTUALIZATION=y
diff --git a/arch/mips/configs/generic/board-marduk.config b/arch/mips/configs/generic/board-marduk.config
index 05ca34cd5a73..65433c5c4fde 100644
--- a/arch/mips/configs/generic/board-marduk.config
+++ b/arch/mips/configs/generic/board-marduk.config
@@ -50,4 +50,3 @@ CONFIG_CRYPTO_DEV_IMGTEC_HASH=y
 CONFIG_IMGPDC_WDT=y
 CONFIG_IR_IMG=y
 CONFIG_CC10001_ADC=y
-CONFIG_SND_SOC_IMG=y
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index 92fc0edbac47..437ef6dc0b4c 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -84,7 +84,6 @@ CONFIG_BRIDGE_EBT_MARK_T=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_DCCP=m
 CONFIG_IP_SCTP=m
 CONFIG_TIPC=m
 CONFIG_ATM=y
@@ -116,7 +115,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -274,7 +272,7 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index e22e8b825903..e123848f94ab 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -79,7 +79,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -161,7 +160,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -234,9 +232,9 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_DS1286=y
 CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
 CONFIG_QUOTA=y
@@ -327,5 +325,4 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=m
 CONFIG_DEBUG_MEMORY_INIT=y
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 4714074c8bd7..1c10242b148b 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -63,7 +63,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -255,9 +254,6 @@ CONFIG_I2C_TAOS_EVM=m
 CONFIG_I2C_STUB=m
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-CONFIG_MFD_PCF50633=m
-CONFIG_PCF50633_ADC=m
-CONFIG_PCF50633_GPIO=m
 # CONFIG_VGA_ARB is not set
 CONFIG_LEDS_LP3944=m
 CONFIG_LEDS_PCA955X=m
@@ -276,9 +272,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
@@ -305,7 +301,6 @@ CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_SHA512=m
@@ -322,4 +317,3 @@ CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m
-CONFIG_CRC_T10DIF=m
diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
index e0040110a3ee..755cbf20f5a5 100644
--- a/arch/mips/configs/ip28_defconfig
+++ b/arch/mips/configs/ip28_defconfig
@@ -49,9 +49,9 @@ CONFIG_WATCHDOG=y
 CONFIG_INDYDOG=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_PROC_KCORE=y
 # CONFIG_PROC_PAGE_MONITOR is not set
@@ -60,6 +60,5 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HW is not set
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/mips/configs/ip30_defconfig b/arch/mips/configs/ip30_defconfig
index 178d61645cea..718f3060d9fa 100644
--- a/arch/mips/configs/ip30_defconfig
+++ b/arch/mips/configs/ip30_defconfig
@@ -143,9 +143,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
@@ -176,8 +176,6 @@ CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_LZO=m
-CONFIG_CRC_T10DIF=m
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 930c5f6ed182..7568838eb08b 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -89,9 +89,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
@@ -177,8 +177,6 @@ CONFIG_CRYPTO_SERPENT=y
 CONFIG_CRYPTO_TEA=y
 CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 65adb538030d..a790c2610fd3 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -69,7 +69,7 @@ CONFIG_FB_G364=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_HWMON is not set
 CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
 CONFIG_AUTOFS_FS=m
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 71d6340497c9..8d3f20ed19b5 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -226,9 +226,9 @@ CONFIG_MMC=m
 CONFIG_LEDS_CLASS=y
 CONFIG_STAGING=y
 CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_XFS_FS=m
@@ -297,7 +297,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
diff --git a/arch/mips/configs/loongson1b_defconfig b/arch/mips/configs/loongson1_defconfig
index 68207b31dc20..02d29110f702 100644
--- a/arch/mips/configs/loongson1b_defconfig
+++ b/arch/mips/configs/loongson1_defconfig
@@ -1,7 +1,6 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
@@ -12,15 +11,17 @@ CONFIG_NAMESPACES=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_MACH_LOONGSON32=y
-# CONFIG_SECCOMP is not set
 # CONFIG_SUSPEND is not set
+CONFIG_JUMP_LABEL=y
+# CONFIG_SECCOMP is not set
+# CONFIG_GCC_PLUGINS is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -30,6 +31,7 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
+# CONFIG_BQL is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -38,32 +40,76 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_LOONGSON=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_SCSI=m
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ALACRITECH is not set
+# CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ASIX is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
+# CONFIG_NET_VENDOR_CAVIUM is not set
+# CONFIG_NET_VENDOR_CORTINA is not set
+# CONFIG_NET_VENDOR_DAVICOM is not set
+# CONFIG_NET_VENDOR_ENGLEDER is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_FUNGIBLE is not set
+# CONFIG_NET_VENDOR_GOOGLE is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_HUAWEI is not set
 # CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_LITEX is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_META is not set
 # CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_MICROSOFT is not set
+# CONFIG_NET_VENDOR_MUCSE is not set
+# CONFIG_NET_VENDOR_NI is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_PENSANDO is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_SOCIONEXT is not set
 CONFIG_STMMAC_ETH=y
+# CONFIG_DWMAC_GENERIC is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
+# CONFIG_NET_VENDOR_VERTEXCOM is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WANGXUN is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_REALTEK_PHY=y
+# CONFIG_USB_NET_DRIVERS is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+# CONFIG_VT_CONSOLE is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_LEGACY_PTY_COUNT=8
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
+# CONFIG_PTP_1588_CLOCK is not set
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_LOONGSON1=y
 # CONFIG_HWMON is not set
@@ -71,7 +117,15 @@ CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_WATCHDOG_SYSFS=y
 CONFIG_LOONGSON1_WDT=y
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_LOONGSON1_AC97=y
+CONFIG_SND_SIMPLE_CARD=y
 CONFIG_HID_GENERIC=m
 CONFIG_USB_HID=m
 CONFIG_USB=y
@@ -86,17 +140,20 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_MTD=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_LOONGSON1=y
+# CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_DRV_LOONGSON=y
+CONFIG_DMADEVICES=y
+CONFIG_LOONGSON1_APB_DMA=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_NVMEM is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
@@ -105,16 +162,17 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_ADVANCED_COMPR=y
 CONFIG_UBIFS_ATIME_SUPPORT=y
+# CONFIG_UBIFS_FS_SECURITY is not set
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_CRYPTO_ECHAINIV is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_MISC is not set
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_RCU_TRACE is not set
 # CONFIG_FTRACE is not set
 # CONFIG_EARLY_PRINTK is not set
+CONFIG_TEST_DHRY=m
diff --git a/arch/mips/configs/loongson1c_defconfig b/arch/mips/configs/loongson1c_defconfig
deleted file mode 100644
index c3910a9dee9e..000000000000
--- a/arch/mips/configs/loongson1c_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_XZ=y
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NAMESPACES=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EXPERT=y
-CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MACH_LOONGSON32=y
-CONFIG_LOONGSON1_LS1C=y
-# CONFIG_SECCOMP is not set
-# CONFIG_SUSPEND is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-CONFIG_STMMAC_ETH=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=8
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_LOONGSON1=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WATCHDOG_SYSFS=y
-CONFIG_LOONGSON1_WDT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_HID_GENERIC=m
-CONFIG_USB_HID=m
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_LOONGSON1=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_ATIME_SUPPORT=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
diff --git a/arch/mips/configs/loongson2k_defconfig b/arch/mips/configs/loongson2k_defconfig
index 4b7f914d01d0..aec1fd1902eb 100644
--- a/arch/mips/configs/loongson2k_defconfig
+++ b/arch/mips/configs/loongson2k_defconfig
@@ -52,7 +52,6 @@ CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -257,6 +256,17 @@ CONFIG_SND_HDA_INTEL=y
 CONFIG_SND_HDA_HWDEP=y
 CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_REALTEK_LIB=y
+CONFIG_SND_HDA_CODEC_ALC260=y
+CONFIG_SND_HDA_CODEC_ALC262=y
+CONFIG_SND_HDA_CODEC_ALC268=y
+CONFIG_SND_HDA_CODEC_ALC269=y
+CONFIG_SND_HDA_CODEC_ALC662=y
+CONFIG_SND_HDA_CODEC_ALC680=y
+CONFIG_SND_HDA_CODEC_ALC861=y
+CONFIG_SND_HDA_CODEC_ALC861VD=y
+CONFIG_SND_HDA_CODEC_ALC880=y
+CONFIG_SND_HDA_CODEC_ALC882=y
 CONFIG_SND_HDA_CODEC_ANALOG=y
 CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_VIA=y
@@ -288,9 +298,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 98844b457b7f..575aaf242361 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -72,7 +72,6 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -293,8 +292,23 @@ CONFIG_SND_SEQ_DUMMY=m
 CONFIG_SND_HDA_INTEL=m
 CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_REALTEK_LIB=m
+CONFIG_SND_HDA_CODEC_ALC260=m
+CONFIG_SND_HDA_CODEC_ALC262=m
+CONFIG_SND_HDA_CODEC_ALC268=m
+CONFIG_SND_HDA_CODEC_ALC269=m
+CONFIG_SND_HDA_CODEC_ALC662=m
+CONFIG_SND_HDA_CODEC_ALC680=m
+CONFIG_SND_HDA_CODEC_ALC861=m
+CONFIG_SND_HDA_CODEC_ALC861VD=m
+CONFIG_SND_HDA_CODEC_ALC880=m
+CONFIG_SND_HDA_CODEC_ALC882=m
 CONFIG_SND_HDA_CODEC_SIGMATEL=m
 CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_HDA_CODEC_HDMI_GENERIC=m
+CONFIG_SND_HDA_CODEC_HDMI_INTEL=m
+CONFIG_SND_HDA_CODEC_HDMI_ATI=m
+CONFIG_SND_HDA_CODEC_HDMI_NVIDIA=m
 CONFIG_SND_HDA_CODEC_CONEXANT=m
 # CONFIG_SND_USB is not set
 CONFIG_HIDRAW=y
@@ -334,9 +348,9 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_XFS_FS=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_QUOTA=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 4390d30206d9..81704ec67f09 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -80,7 +80,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
@@ -190,7 +189,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -315,7 +313,7 @@ CONFIG_RTC_DRV_CMOS=y
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
@@ -347,7 +345,6 @@ CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig
index d63d8be8cb50..82a97f58bce1 100644
--- a/arch/mips/configs/malta_kvm_defconfig
+++ b/arch/mips/configs/malta_kvm_defconfig
@@ -84,7 +84,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
@@ -194,7 +193,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -321,7 +319,7 @@ CONFIG_RTC_DRV_CMOS=y
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
@@ -354,7 +352,6 @@ CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
diff --git a/arch/mips/configs/malta_qemu_32r6_defconfig b/arch/mips/configs/malta_qemu_32r6_defconfig
index b21f48863d81..accb471a1d93 100644
--- a/arch/mips/configs/malta_qemu_32r6_defconfig
+++ b/arch/mips/configs/malta_qemu_32r6_defconfig
@@ -64,7 +64,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -149,7 +148,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig
index ecfa8a396c33..6bda67c5f68f 100644
--- a/arch/mips/configs/maltaaprp_defconfig
+++ b/arch/mips/configs/maltaaprp_defconfig
@@ -66,7 +66,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -150,7 +149,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
diff --git a/arch/mips/configs/maltasmvp_defconfig b/arch/mips/configs/maltasmvp_defconfig
index 5cb4f262a4ea..e4082537f80f 100644
--- a/arch/mips/configs/maltasmvp_defconfig
+++ b/arch/mips/configs/maltasmvp_defconfig
@@ -67,7 +67,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -149,9 +148,9 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
diff --git a/arch/mips/configs/maltasmvp_eva_defconfig b/arch/mips/configs/maltasmvp_eva_defconfig
index 5e1498296782..58f5af45fa98 100644
--- a/arch/mips/configs/maltasmvp_eva_defconfig
+++ b/arch/mips/configs/maltasmvp_eva_defconfig
@@ -68,7 +68,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -153,7 +152,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
diff --git a/arch/mips/configs/maltaup_defconfig b/arch/mips/configs/maltaup_defconfig
index c8594505d676..9bfef7de0d1c 100644
--- a/arch/mips/configs/maltaup_defconfig
+++ b/arch/mips/configs/maltaup_defconfig
@@ -65,7 +65,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -149,7 +148,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig
index 338bb6544a93..0f9ef20744f9 100644
--- a/arch/mips/configs/maltaup_xpa_defconfig
+++ b/arch/mips/configs/maltaup_xpa_defconfig
@@ -82,7 +82,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
@@ -191,7 +190,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -321,7 +319,7 @@ CONFIG_RTC_DRV_CMOS=y
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
@@ -353,7 +351,6 @@ CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 8e98c0796437..c58d1a61d528 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -130,7 +130,6 @@ CONFIG_BRIDGE_EBT_MARK_T=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_DCCP=m
 CONFIG_IP_SCTP=m
 CONFIG_TIPC=m
 CONFIG_ATM=y
@@ -162,7 +161,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -275,6 +273,7 @@ CONFIG_DM9102=m
 CONFIG_ULI526X=m
 CONFIG_PCMCIA_XIRCOM=m
 CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
 CONFIG_PCMCIA_FMVJ18X=m
 CONFIG_E100=m
 CONFIG_E1000=m
@@ -596,9 +595,9 @@ CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_AUTOFS_FS=y
 CONFIG_FUSE_FS=m
@@ -663,7 +662,7 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD5=y
diff --git a/arch/mips/configs/omega2p_defconfig b/arch/mips/configs/omega2p_defconfig
index 7c1c1b974d8f..e2bcdfd290a1 100644
--- a/arch/mips/configs/omega2p_defconfig
+++ b/arch/mips/configs/omega2p_defconfig
@@ -61,6 +61,7 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_MMC=y
+CONFIG_CLK_MTMIPS=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
 CONFIG_PHY_RALINK_USB=y
@@ -110,7 +111,6 @@ CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-CONFIG_CRC16=y
 CONFIG_XZ_DEC=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
index 517f1b060bf4..30d18b084cda 100644
--- a/arch/mips/configs/rb532_defconfig
+++ b/arch/mips/configs/rb532_defconfig
@@ -56,7 +56,6 @@ CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=y
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
@@ -77,7 +76,6 @@ CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_PRIO=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -154,7 +152,6 @@ CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_SQUASHFS=y
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
 CONFIG_STRIP_ASM_SYMS=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 08e1c1f2f4de..b507dc4dddd4 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -64,7 +64,6 @@ CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -143,7 +142,6 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
@@ -309,7 +307,7 @@ CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_LD=m
 CONFIG_USB_TEST=m
 CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
 CONFIG_AUTOFS_FS=m
@@ -336,7 +334,6 @@ CONFIG_MINIX_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFSD=m
diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
index 332f9094e847..8f9701efef19 100644
--- a/arch/mips/configs/rt305x_defconfig
+++ b/arch/mips/configs/rt305x_defconfig
@@ -128,8 +128,6 @@ CONFIG_SQUASHFS=y
 # CONFIG_SQUASHFS_ZLIB is not set
 CONFIG_SQUASHFS_XZ=y
 CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32_SARWATE=y
 # CONFIG_XZ_DEC_X86 is not set
 # CONFIG_XZ_DEC_POWERPC is not set
 # CONFIG_XZ_DEC_IA64 is not set
diff --git a/arch/mips/configs/sb1250_swarm_defconfig b/arch/mips/configs/sb1250_swarm_defconfig
index ce855b644bb0..ae2afff00e01 100644
--- a/arch/mips/configs/sb1250_swarm_defconfig
+++ b/arch/mips/configs/sb1250_swarm_defconfig
@@ -99,4 +99,3 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC16=m
diff --git a/arch/mips/configs/vocore2_defconfig b/arch/mips/configs/vocore2_defconfig
index 7c8ebb1b56da..2a9a9b12847d 100644
--- a/arch/mips/configs/vocore2_defconfig
+++ b/arch/mips/configs/vocore2_defconfig
@@ -61,6 +61,7 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_MMC=y
+CONFIG_CLK_MTMIPS=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
 CONFIG_PHY_RALINK_USB=y
@@ -110,7 +111,6 @@ CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-CONFIG_CRC16=y
 CONFIG_XZ_DEC=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig
index 08c0aa03fd56..aae8497b6872 100644
--- a/arch/mips/configs/xway_defconfig
+++ b/arch/mips/configs/xway_defconfig
@@ -140,8 +140,6 @@ CONFIG_SQUASHFS=y
 # CONFIG_SQUASHFS_ZLIB is not set
 CONFIG_SQUASHFS_XZ=y
 CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32_SARWATE=y
 CONFIG_PRINTK_TIME=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/mips/crypto/Kconfig b/arch/mips/crypto/Kconfig
index 9003a5c1e879..6a5bd5074867 100644
--- a/arch/mips/crypto/Kconfig
+++ b/arch/mips/crypto/Kconfig
@@ -2,73 +2,4 @@
 
 menu "Accelerated Cryptographic Algorithms for CPU (mips)"
 
-config CRYPTO_CRC32_MIPS
-	tristate "CRC32c and CRC32"
-	depends on MIPS_CRC_SUPPORT
-	select CRYPTO_HASH
-	help
-	  CRC32c and CRC32 CRC algorithms
-
-	  Architecture: mips
-
-config CRYPTO_POLY1305_MIPS
-	tristate "Hash functions: Poly1305"
-	depends on MIPS
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-	help
-	  Poly1305 authenticator algorithm (RFC7539)
-
-	  Architecture: mips
-
-config CRYPTO_MD5_OCTEON
-	tristate "Digests: MD5 (OCTEON)"
-	depends on CPU_CAVIUM_OCTEON
-	select CRYPTO_MD5
-	select CRYPTO_HASH
-	help
-	  MD5 message digest algorithm (RFC1321)
-
-	  Architecture: mips OCTEON using crypto instructions, when available
-
-config CRYPTO_SHA1_OCTEON
-	tristate "Hash functions: SHA-1 (OCTEON)"
-	depends on CPU_CAVIUM_OCTEON
-	select CRYPTO_SHA1
-	select CRYPTO_HASH
-	help
-	  SHA-1 secure hash algorithm (FIPS 180)
-
-	  Architecture: mips OCTEON
-
-config CRYPTO_SHA256_OCTEON
-	tristate "Hash functions: SHA-224 and SHA-256 (OCTEON)"
-	depends on CPU_CAVIUM_OCTEON
-	select CRYPTO_SHA256
-	select CRYPTO_HASH
-	help
-	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
-
-	  Architecture: mips OCTEON using crypto instructions, when available
-
-config CRYPTO_SHA512_OCTEON
-	tristate "Hash functions: SHA-384 and SHA-512 (OCTEON)"
-	depends on CPU_CAVIUM_OCTEON
-	select CRYPTO_SHA512
-	select CRYPTO_HASH
-	help
-	  SHA-384 and SHA-512 secure hash algorithms (FIPS 180)
-
-	  Architecture: mips OCTEON using crypto instructions, when available
-
-config CRYPTO_CHACHA_MIPS
-	tristate "Ciphers: ChaCha20, XChaCha20, XChaCha12 (MIPS32r2)"
-	depends on CPU_MIPS32_R2
-	select CRYPTO_SKCIPHER
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-	help
-	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
-	  stream cipher algorithms
-
-	  Architecture: MIPS32r2
-
 endmenu
diff --git a/arch/mips/crypto/Makefile b/arch/mips/crypto/Makefile
index 5e4105cccf9f..5adb631a69c1 100644
--- a/arch/mips/crypto/Makefile
+++ b/arch/mips/crypto/Makefile
@@ -3,22 +3,3 @@
 # Makefile for MIPS crypto files..
 #
 
-obj-$(CONFIG_CRYPTO_CRC32_MIPS) += crc32-mips.o
-
-obj-$(CONFIG_CRYPTO_CHACHA_MIPS) += chacha-mips.o
-chacha-mips-y := chacha-core.o chacha-glue.o
-AFLAGS_chacha-core.o += -O2 # needed to fill branch delay slots
-
-obj-$(CONFIG_CRYPTO_POLY1305_MIPS) += poly1305-mips.o
-poly1305-mips-y := poly1305-core.o poly1305-glue.o
-
-perlasm-flavour-$(CONFIG_32BIT) := o32
-perlasm-flavour-$(CONFIG_64BIT) := 64
-
-quiet_cmd_perlasm = PERLASM $@
-      cmd_perlasm = $(PERL) $(<) $(perlasm-flavour-y) $(@)
-
-$(obj)/poly1305-core.S: $(src)/poly1305-mips.pl FORCE
-	$(call if_changed,perlasm)
-
-targets += poly1305-core.S
diff --git a/arch/mips/crypto/chacha-core.S b/arch/mips/crypto/chacha-core.S
deleted file mode 100644
index 5755f69cfe00..000000000000
--- a/arch/mips/crypto/chacha-core.S
+++ /dev/null
@@ -1,497 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-/*
- * Copyright (C) 2016-2018 René van Dorst <opensource@vdorst.com>. All Rights Reserved.
- * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- */
-
-#define MASK_U32		0x3c
-#define CHACHA20_BLOCK_SIZE	64
-#define STACK_SIZE		32
-
-#define X0	$t0
-#define X1	$t1
-#define X2	$t2
-#define X3	$t3
-#define X4	$t4
-#define X5	$t5
-#define X6	$t6
-#define X7	$t7
-#define X8	$t8
-#define X9	$t9
-#define X10	$v1
-#define X11	$s6
-#define X12	$s5
-#define X13	$s4
-#define X14	$s3
-#define X15	$s2
-/* Use regs which are overwritten on exit for Tx so we don't leak clear data. */
-#define T0	$s1
-#define T1	$s0
-#define T(n)	T ## n
-#define X(n)	X ## n
-
-/* Input arguments */
-#define STATE		$a0
-#define OUT		$a1
-#define IN		$a2
-#define BYTES		$a3
-
-/* Output argument */
-/* NONCE[0] is kept in a register and not in memory.
- * We don't want to touch original value in memory.
- * Must be incremented every loop iteration.
- */
-#define NONCE_0		$v0
-
-/* SAVED_X and SAVED_CA are set in the jump table.
- * Use regs which are overwritten on exit else we don't leak clear data.
- * They are used to handling the last bytes which are not multiple of 4.
- */
-#define SAVED_X		X15
-#define SAVED_CA	$s7
-
-#define IS_UNALIGNED	$s7
-
-#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
-#define MSB 0
-#define LSB 3
-#define ROTx rotl
-#define ROTR(n) rotr n, 24
-#define	CPU_TO_LE32(n) \
-	wsbh	n; \
-	rotr	n, 16;
-#else
-#define MSB 3
-#define LSB 0
-#define ROTx rotr
-#define CPU_TO_LE32(n)
-#define ROTR(n)
-#endif
-
-#define FOR_EACH_WORD(x) \
-	x( 0); \
-	x( 1); \
-	x( 2); \
-	x( 3); \
-	x( 4); \
-	x( 5); \
-	x( 6); \
-	x( 7); \
-	x( 8); \
-	x( 9); \
-	x(10); \
-	x(11); \
-	x(12); \
-	x(13); \
-	x(14); \
-	x(15);
-
-#define FOR_EACH_WORD_REV(x) \
-	x(15); \
-	x(14); \
-	x(13); \
-	x(12); \
-	x(11); \
-	x(10); \
-	x( 9); \
-	x( 8); \
-	x( 7); \
-	x( 6); \
-	x( 5); \
-	x( 4); \
-	x( 3); \
-	x( 2); \
-	x( 1); \
-	x( 0);
-
-#define PLUS_ONE_0	 1
-#define PLUS_ONE_1	 2
-#define PLUS_ONE_2	 3
-#define PLUS_ONE_3	 4
-#define PLUS_ONE_4	 5
-#define PLUS_ONE_5	 6
-#define PLUS_ONE_6	 7
-#define PLUS_ONE_7	 8
-#define PLUS_ONE_8	 9
-#define PLUS_ONE_9	10
-#define PLUS_ONE_10	11
-#define PLUS_ONE_11	12
-#define PLUS_ONE_12	13
-#define PLUS_ONE_13	14
-#define PLUS_ONE_14	15
-#define PLUS_ONE_15	16
-#define PLUS_ONE(x)	PLUS_ONE_ ## x
-#define _CONCAT3(a,b,c)	a ## b ## c
-#define CONCAT3(a,b,c)	_CONCAT3(a,b,c)
-
-#define STORE_UNALIGNED(x) \
-CONCAT3(.Lchacha_mips_xor_unaligned_, PLUS_ONE(x), _b: ;) \
-	.if (x != 12); \
-		lw	T0, (x*4)(STATE); \
-	.endif; \
-	lwl	T1, (x*4)+MSB ## (IN); \
-	lwr	T1, (x*4)+LSB ## (IN); \
-	.if (x == 12); \
-		addu	X ## x, NONCE_0; \
-	.else; \
-		addu	X ## x, T0; \
-	.endif; \
-	CPU_TO_LE32(X ## x); \
-	xor	X ## x, T1; \
-	swl	X ## x, (x*4)+MSB ## (OUT); \
-	swr	X ## x, (x*4)+LSB ## (OUT);
-
-#define STORE_ALIGNED(x) \
-CONCAT3(.Lchacha_mips_xor_aligned_, PLUS_ONE(x), _b: ;) \
-	.if (x != 12); \
-		lw	T0, (x*4)(STATE); \
-	.endif; \
-	lw	T1, (x*4) ## (IN); \
-	.if (x == 12); \
-		addu	X ## x, NONCE_0; \
-	.else; \
-		addu	X ## x, T0; \
-	.endif; \
-	CPU_TO_LE32(X ## x); \
-	xor	X ## x, T1; \
-	sw	X ## x, (x*4) ## (OUT);
-
-/* Jump table macro.
- * Used for setup and handling the last bytes, which are not multiple of 4.
- * X15 is free to store Xn
- * Every jumptable entry must be equal in size.
- */
-#define JMPTBL_ALIGNED(x) \
-.Lchacha_mips_jmptbl_aligned_ ## x: ; \
-	.set	noreorder; \
-	b	.Lchacha_mips_xor_aligned_ ## x ## _b; \
-	.if (x == 12); \
-		addu	SAVED_X, X ## x, NONCE_0; \
-	.else; \
-		addu	SAVED_X, X ## x, SAVED_CA; \
-	.endif; \
-	.set	reorder
-
-#define JMPTBL_UNALIGNED(x) \
-.Lchacha_mips_jmptbl_unaligned_ ## x: ; \
-	.set	noreorder; \
-	b	.Lchacha_mips_xor_unaligned_ ## x ## _b; \
-	.if (x == 12); \
-		addu	SAVED_X, X ## x, NONCE_0; \
-	.else; \
-		addu	SAVED_X, X ## x, SAVED_CA; \
-	.endif; \
-	.set	reorder
-
-#define AXR(A, B, C, D,  K, L, M, N,  V, W, Y, Z,  S) \
-	addu	X(A), X(K); \
-	addu	X(B), X(L); \
-	addu	X(C), X(M); \
-	addu	X(D), X(N); \
-	xor	X(V), X(A); \
-	xor	X(W), X(B); \
-	xor	X(Y), X(C); \
-	xor	X(Z), X(D); \
-	rotl	X(V), S;    \
-	rotl	X(W), S;    \
-	rotl	X(Y), S;    \
-	rotl	X(Z), S;
-
-.text
-.set	reorder
-.set	noat
-.globl	chacha_crypt_arch
-.ent	chacha_crypt_arch
-chacha_crypt_arch:
-	.frame	$sp, STACK_SIZE, $ra
-
-	/* Load number of rounds */
-	lw	$at, 16($sp)
-
-	addiu	$sp, -STACK_SIZE
-
-	/* Return bytes = 0. */
-	beqz	BYTES, .Lchacha_mips_end
-
-	lw	NONCE_0, 48(STATE)
-
-	/* Save s0-s7 */
-	sw	$s0,  0($sp)
-	sw	$s1,  4($sp)
-	sw	$s2,  8($sp)
-	sw	$s3, 12($sp)
-	sw	$s4, 16($sp)
-	sw	$s5, 20($sp)
-	sw	$s6, 24($sp)
-	sw	$s7, 28($sp)
-
-	/* Test IN or OUT is unaligned.
-	 * IS_UNALIGNED = ( IN | OUT ) & 0x00000003
-	 */
-	or	IS_UNALIGNED, IN, OUT
-	andi	IS_UNALIGNED, 0x3
-
-	b	.Lchacha_rounds_start
-
-.align 4
-.Loop_chacha_rounds:
-	addiu	IN,  CHACHA20_BLOCK_SIZE
-	addiu	OUT, CHACHA20_BLOCK_SIZE
-	addiu	NONCE_0, 1
-
-.Lchacha_rounds_start:
-	lw	X0,  0(STATE)
-	lw	X1,  4(STATE)
-	lw	X2,  8(STATE)
-	lw	X3,  12(STATE)
-
-	lw	X4,  16(STATE)
-	lw	X5,  20(STATE)
-	lw	X6,  24(STATE)
-	lw	X7,  28(STATE)
-	lw	X8,  32(STATE)
-	lw	X9,  36(STATE)
-	lw	X10, 40(STATE)
-	lw	X11, 44(STATE)
-
-	move	X12, NONCE_0
-	lw	X13, 52(STATE)
-	lw	X14, 56(STATE)
-	lw	X15, 60(STATE)
-
-.Loop_chacha_xor_rounds:
-	addiu	$at, -2
-	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15, 16);
-	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7, 12);
-	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15,  8);
-	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7,  7);
-	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14, 16);
-	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4, 12);
-	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14,  8);
-	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4,  7);
-	bnez	$at, .Loop_chacha_xor_rounds
-
-	addiu	BYTES, -(CHACHA20_BLOCK_SIZE)
-
-	/* Is data src/dst unaligned? Jump */
-	bnez	IS_UNALIGNED, .Loop_chacha_unaligned
-
-	/* Set number rounds here to fill delayslot. */
-	lw	$at, (STACK_SIZE+16)($sp)
-
-	/* BYTES < 0, it has no full block. */
-	bltz	BYTES, .Lchacha_mips_no_full_block_aligned
-
-	FOR_EACH_WORD_REV(STORE_ALIGNED)
-
-	/* BYTES > 0? Loop again. */
-	bgtz	BYTES, .Loop_chacha_rounds
-
-	/* Place this here to fill delay slot */
-	addiu	NONCE_0, 1
-
-	/* BYTES < 0? Handle last bytes */
-	bltz	BYTES, .Lchacha_mips_xor_bytes
-
-.Lchacha_mips_xor_done:
-	/* Restore used registers */
-	lw	$s0,  0($sp)
-	lw	$s1,  4($sp)
-	lw	$s2,  8($sp)
-	lw	$s3, 12($sp)
-	lw	$s4, 16($sp)
-	lw	$s5, 20($sp)
-	lw	$s6, 24($sp)
-	lw	$s7, 28($sp)
-
-	/* Write NONCE_0 back to right location in state */
-	sw	NONCE_0, 48(STATE)
-
-.Lchacha_mips_end:
-	addiu	$sp, STACK_SIZE
-	jr	$ra
-
-.Lchacha_mips_no_full_block_aligned:
-	/* Restore the offset on BYTES */
-	addiu	BYTES, CHACHA20_BLOCK_SIZE
-
-	/* Get number of full WORDS */
-	andi	$at, BYTES, MASK_U32
-
-	/* Load upper half of jump table addr */
-	lui	T0, %hi(.Lchacha_mips_jmptbl_aligned_0)
-
-	/* Calculate lower half jump table offset */
-	ins	T0, $at, 1, 6
-
-	/* Add offset to STATE */
-	addu	T1, STATE, $at
-
-	/* Add lower half jump table addr */
-	addiu	T0, %lo(.Lchacha_mips_jmptbl_aligned_0)
-
-	/* Read value from STATE */
-	lw	SAVED_CA, 0(T1)
-
-	/* Store remaining bytecounter as negative value */
-	subu	BYTES, $at, BYTES
-
-	jr	T0
-
-	/* Jump table */
-	FOR_EACH_WORD(JMPTBL_ALIGNED)
-
-
-.Loop_chacha_unaligned:
-	/* Set number rounds here to fill delayslot. */
-	lw	$at, (STACK_SIZE+16)($sp)
-
-	/* BYTES > 0, it has no full block. */
-	bltz	BYTES, .Lchacha_mips_no_full_block_unaligned
-
-	FOR_EACH_WORD_REV(STORE_UNALIGNED)
-
-	/* BYTES > 0? Loop again. */
-	bgtz	BYTES, .Loop_chacha_rounds
-
-	/* Write NONCE_0 back to right location in state */
-	sw	NONCE_0, 48(STATE)
-
-	.set noreorder
-	/* Fall through to byte handling */
-	bgez	BYTES, .Lchacha_mips_xor_done
-.Lchacha_mips_xor_unaligned_0_b:
-.Lchacha_mips_xor_aligned_0_b:
-	/* Place this here to fill delay slot */
-	addiu	NONCE_0, 1
-	.set reorder
-
-.Lchacha_mips_xor_bytes:
-	addu	IN, $at
-	addu	OUT, $at
-	/* First byte */
-	lbu	T1, 0(IN)
-	addiu	$at, BYTES, 1
-	CPU_TO_LE32(SAVED_X)
-	ROTR(SAVED_X)
-	xor	T1, SAVED_X
-	sb	T1, 0(OUT)
-	beqz	$at, .Lchacha_mips_xor_done
-	/* Second byte */
-	lbu	T1, 1(IN)
-	addiu	$at, BYTES, 2
-	ROTx	SAVED_X, 8
-	xor	T1, SAVED_X
-	sb	T1, 1(OUT)
-	beqz	$at, .Lchacha_mips_xor_done
-	/* Third byte */
-	lbu	T1, 2(IN)
-	ROTx	SAVED_X, 8
-	xor	T1, SAVED_X
-	sb	T1, 2(OUT)
-	b	.Lchacha_mips_xor_done
-
-.Lchacha_mips_no_full_block_unaligned:
-	/* Restore the offset on BYTES */
-	addiu	BYTES, CHACHA20_BLOCK_SIZE
-
-	/* Get number of full WORDS */
-	andi	$at, BYTES, MASK_U32
-
-	/* Load upper half of jump table addr */
-	lui	T0, %hi(.Lchacha_mips_jmptbl_unaligned_0)
-
-	/* Calculate lower half jump table offset */
-	ins	T0, $at, 1, 6
-
-	/* Add offset to STATE */
-	addu	T1, STATE, $at
-
-	/* Add lower half jump table addr */
-	addiu	T0, %lo(.Lchacha_mips_jmptbl_unaligned_0)
-
-	/* Read value from STATE */
-	lw	SAVED_CA, 0(T1)
-
-	/* Store remaining bytecounter as negative value */
-	subu	BYTES, $at, BYTES
-
-	jr	T0
-
-	/* Jump table */
-	FOR_EACH_WORD(JMPTBL_UNALIGNED)
-.end chacha_crypt_arch
-.set at
-
-/* Input arguments
- * STATE	$a0
- * OUT		$a1
- * NROUND	$a2
- */
-
-#undef X12
-#undef X13
-#undef X14
-#undef X15
-
-#define X12	$a3
-#define X13	$at
-#define X14	$v0
-#define X15	STATE
-
-.set noat
-.globl	hchacha_block_arch
-.ent	hchacha_block_arch
-hchacha_block_arch:
-	.frame	$sp, STACK_SIZE, $ra
-
-	addiu	$sp, -STACK_SIZE
-
-	/* Save X11(s6) */
-	sw	X11, 0($sp)
-
-	lw	X0,  0(STATE)
-	lw	X1,  4(STATE)
-	lw	X2,  8(STATE)
-	lw	X3,  12(STATE)
-	lw	X4,  16(STATE)
-	lw	X5,  20(STATE)
-	lw	X6,  24(STATE)
-	lw	X7,  28(STATE)
-	lw	X8,  32(STATE)
-	lw	X9,  36(STATE)
-	lw	X10, 40(STATE)
-	lw	X11, 44(STATE)
-	lw	X12, 48(STATE)
-	lw	X13, 52(STATE)
-	lw	X14, 56(STATE)
-	lw	X15, 60(STATE)
-
-.Loop_hchacha_xor_rounds:
-	addiu	$a2, -2
-	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15, 16);
-	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7, 12);
-	AXR( 0, 1, 2, 3,  4, 5, 6, 7, 12,13,14,15,  8);
-	AXR( 8, 9,10,11, 12,13,14,15,  4, 5, 6, 7,  7);
-	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14, 16);
-	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4, 12);
-	AXR( 0, 1, 2, 3,  5, 6, 7, 4, 15,12,13,14,  8);
-	AXR(10,11, 8, 9, 15,12,13,14,  5, 6, 7, 4,  7);
-	bnez	$a2, .Loop_hchacha_xor_rounds
-
-	/* Restore used register */
-	lw	X11, 0($sp)
-
-	sw	X0,  0(OUT)
-	sw	X1,  4(OUT)
-	sw	X2,  8(OUT)
-	sw	X3,  12(OUT)
-	sw	X12, 16(OUT)
-	sw	X13, 20(OUT)
-	sw	X14, 24(OUT)
-	sw	X15, 28(OUT)
-
-	addiu	$sp, STACK_SIZE
-	jr	$ra
-.end hchacha_block_arch
-.set at
diff --git a/arch/mips/crypto/chacha-glue.c b/arch/mips/crypto/chacha-glue.c
deleted file mode 100644
index d1fd23e6ef84..000000000000
--- a/arch/mips/crypto/chacha-glue.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * MIPS accelerated ChaCha and XChaCha stream ciphers,
- * including ChaCha20 (RFC7539)
- *
- * Copyright (C) 2019 Linaro, Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <asm/byteorder.h>
-#include <crypto/algapi.h>
-#include <crypto/internal/chacha.h>
-#include <crypto/internal/skcipher.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-asmlinkage void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src,
-				  unsigned int bytes, int nrounds);
-EXPORT_SYMBOL(chacha_crypt_arch);
-
-asmlinkage void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds);
-EXPORT_SYMBOL(hchacha_block_arch);
-
-void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
-{
-	chacha_init_generic(state, key, iv);
-}
-EXPORT_SYMBOL(chacha_init_arch);
-
-static int chacha_mips_stream_xor(struct skcipher_request *req,
-				  const struct chacha_ctx *ctx, const u8 *iv)
-{
-	struct skcipher_walk walk;
-	u32 state[16];
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	chacha_init_generic(state, ctx->key, iv);
-
-	while (walk.nbytes > 0) {
-		unsigned int nbytes = walk.nbytes;
-
-		if (nbytes < walk.total)
-			nbytes = round_down(nbytes, walk.stride);
-
-		chacha_crypt(state, walk.dst.virt.addr, walk.src.virt.addr,
-			     nbytes, ctx->nrounds);
-		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
-	}
-
-	return err;
-}
-
-static int chacha_mips(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	return chacha_mips_stream_xor(req, ctx, req->iv);
-}
-
-static int xchacha_mips(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct chacha_ctx subctx;
-	u32 state[16];
-	u8 real_iv[16];
-
-	chacha_init_generic(state, ctx->key, req->iv);
-
-	hchacha_block(state, subctx.key, ctx->nrounds);
-	subctx.nrounds = ctx->nrounds;
-
-	memcpy(&real_iv[0], req->iv + 24, 8);
-	memcpy(&real_iv[8], req->iv + 16, 8);
-	return chacha_mips_stream_xor(req, &subctx, real_iv);
-}
-
-static struct skcipher_alg algs[] = {
-	{
-		.base.cra_name		= "chacha20",
-		.base.cra_driver_name	= "chacha20-mips",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= CHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= chacha_mips,
-		.decrypt		= chacha_mips,
-	}, {
-		.base.cra_name		= "xchacha20",
-		.base.cra_driver_name	= "xchacha20-mips",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha20_setkey,
-		.encrypt		= xchacha_mips,
-		.decrypt		= xchacha_mips,
-	}, {
-		.base.cra_name		= "xchacha12",
-		.base.cra_driver_name	= "xchacha12-mips",
-		.base.cra_priority	= 200,
-		.base.cra_blocksize	= 1,
-		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
-		.base.cra_module	= THIS_MODULE,
-
-		.min_keysize		= CHACHA_KEY_SIZE,
-		.max_keysize		= CHACHA_KEY_SIZE,
-		.ivsize			= XCHACHA_IV_SIZE,
-		.chunksize		= CHACHA_BLOCK_SIZE,
-		.setkey			= chacha12_setkey,
-		.encrypt		= xchacha_mips,
-		.decrypt		= xchacha_mips,
-	}
-};
-
-static int __init chacha_simd_mod_init(void)
-{
-	return IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) ?
-		crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0;
-}
-
-static void __exit chacha_simd_mod_fini(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER))
-		crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
-}
-
-module_init(chacha_simd_mod_init);
-module_exit(chacha_simd_mod_fini);
-
-MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (MIPS accelerated)");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("chacha20");
-MODULE_ALIAS_CRYPTO("chacha20-mips");
-MODULE_ALIAS_CRYPTO("xchacha20");
-MODULE_ALIAS_CRYPTO("xchacha20-mips");
-MODULE_ALIAS_CRYPTO("xchacha12");
-MODULE_ALIAS_CRYPTO("xchacha12-mips");
diff --git a/arch/mips/crypto/crc32-mips.c b/arch/mips/crypto/crc32-mips.c
deleted file mode 100644
index 90eacf00cfc3..000000000000
--- a/arch/mips/crypto/crc32-mips.c
+++ /dev/null
@@ -1,354 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * crc32-mips.c - CRC32 and CRC32C using optional MIPSr6 instructions
- *
- * Module based on arm64/crypto/crc32-arm.c
- *
- * Copyright (C) 2014 Linaro Ltd <yazen.ghannam@linaro.org>
- * Copyright (C) 2018 MIPS Tech, LLC
- */
-
-#include <linux/cpufeature.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <asm/mipsregs.h>
-#include <linux/unaligned.h>
-
-#include <crypto/internal/hash.h>
-
-enum crc_op_size {
-	b, h, w, d,
-};
-
-enum crc_type {
-	crc32,
-	crc32c,
-};
-
-#ifndef TOOLCHAIN_SUPPORTS_CRC
-#define _ASM_SET_CRC(OP, SZ, TYPE)					  \
-_ASM_MACRO_3R(OP, rt, rs, rt2,						  \
-	".ifnc	\\rt, \\rt2\n\t"					  \
-	".error	\"invalid operands \\\"" #OP " \\rt,\\rs,\\rt2\\\"\"\n\t" \
-	".endif\n\t"							  \
-	_ASM_INSN_IF_MIPS(0x7c00000f | (__rt << 16) | (__rs << 21) |	  \
-			  ((SZ) <<  6) | ((TYPE) << 8))			  \
-	_ASM_INSN32_IF_MM(0x00000030 | (__rs << 16) | (__rt << 21) |	  \
-			  ((SZ) << 14) | ((TYPE) << 3)))
-#define _ASM_UNSET_CRC(op, SZ, TYPE) ".purgem " #op "\n\t"
-#else /* !TOOLCHAIN_SUPPORTS_CRC */
-#define _ASM_SET_CRC(op, SZ, TYPE) ".set\tcrc\n\t"
-#define _ASM_UNSET_CRC(op, SZ, TYPE)
-#endif
-
-#define __CRC32(crc, value, op, SZ, TYPE)		\
-do {							\
-	__asm__ __volatile__(				\
-		".set	push\n\t"			\
-		_ASM_SET_CRC(op, SZ, TYPE)		\
-		#op "	%0, %1, %0\n\t"			\
-		_ASM_UNSET_CRC(op, SZ, TYPE)		\
-		".set	pop"				\
-		: "+r" (crc)				\
-		: "r" (value));				\
-} while (0)
-
-#define _CRC32_crc32b(crc, value)	__CRC32(crc, value, crc32b, 0, 0)
-#define _CRC32_crc32h(crc, value)	__CRC32(crc, value, crc32h, 1, 0)
-#define _CRC32_crc32w(crc, value)	__CRC32(crc, value, crc32w, 2, 0)
-#define _CRC32_crc32d(crc, value)	__CRC32(crc, value, crc32d, 3, 0)
-#define _CRC32_crc32cb(crc, value)	__CRC32(crc, value, crc32cb, 0, 1)
-#define _CRC32_crc32ch(crc, value)	__CRC32(crc, value, crc32ch, 1, 1)
-#define _CRC32_crc32cw(crc, value)	__CRC32(crc, value, crc32cw, 2, 1)
-#define _CRC32_crc32cd(crc, value)	__CRC32(crc, value, crc32cd, 3, 1)
-
-#define _CRC32(crc, value, size, op) \
-	_CRC32_##op##size(crc, value)
-
-#define CRC32(crc, value, size) \
-	_CRC32(crc, value, size, crc32)
-
-#define CRC32C(crc, value, size) \
-	_CRC32(crc, value, size, crc32c)
-
-static u32 crc32_mips_le_hw(u32 crc_, const u8 *p, unsigned int len)
-{
-	u32 crc = crc_;
-
-	if (IS_ENABLED(CONFIG_64BIT)) {
-		for (; len >= sizeof(u64); p += sizeof(u64), len -= sizeof(u64)) {
-			u64 value = get_unaligned_le64(p);
-
-			CRC32(crc, value, d);
-		}
-
-		if (len & sizeof(u32)) {
-			u32 value = get_unaligned_le32(p);
-
-			CRC32(crc, value, w);
-			p += sizeof(u32);
-		}
-	} else {
-		for (; len >= sizeof(u32); len -= sizeof(u32)) {
-			u32 value = get_unaligned_le32(p);
-
-			CRC32(crc, value, w);
-			p += sizeof(u32);
-		}
-	}
-
-	if (len & sizeof(u16)) {
-		u16 value = get_unaligned_le16(p);
-
-		CRC32(crc, value, h);
-		p += sizeof(u16);
-	}
-
-	if (len & sizeof(u8)) {
-		u8 value = *p++;
-
-		CRC32(crc, value, b);
-	}
-
-	return crc;
-}
-
-static u32 crc32c_mips_le_hw(u32 crc_, const u8 *p, unsigned int len)
-{
-	u32 crc = crc_;
-
-	if (IS_ENABLED(CONFIG_64BIT)) {
-		for (; len >= sizeof(u64); p += sizeof(u64), len -= sizeof(u64)) {
-			u64 value = get_unaligned_le64(p);
-
-			CRC32C(crc, value, d);
-		}
-
-		if (len & sizeof(u32)) {
-			u32 value = get_unaligned_le32(p);
-
-			CRC32C(crc, value, w);
-			p += sizeof(u32);
-		}
-	} else {
-		for (; len >= sizeof(u32); len -= sizeof(u32)) {
-			u32 value = get_unaligned_le32(p);
-
-			CRC32C(crc, value, w);
-			p += sizeof(u32);
-		}
-	}
-
-	if (len & sizeof(u16)) {
-		u16 value = get_unaligned_le16(p);
-
-		CRC32C(crc, value, h);
-		p += sizeof(u16);
-	}
-
-	if (len & sizeof(u8)) {
-		u8 value = *p++;
-
-		CRC32C(crc, value, b);
-	}
-	return crc;
-}
-
-#define CHKSUM_BLOCK_SIZE	1
-#define CHKSUM_DIGEST_SIZE	4
-
-struct chksum_ctx {
-	u32 key;
-};
-
-struct chksum_desc_ctx {
-	u32 crc;
-};
-
-static int chksum_init(struct shash_desc *desc)
-{
-	struct chksum_ctx *mctx = crypto_shash_ctx(desc->tfm);
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	ctx->crc = mctx->key;
-
-	return 0;
-}
-
-/*
- * Setting the seed allows arbitrary accumulators and flexible XOR policy
- * If your algorithm starts with ~0, then XOR with ~0 before you set
- * the seed.
- */
-static int chksum_setkey(struct crypto_shash *tfm, const u8 *key,
-			 unsigned int keylen)
-{
-	struct chksum_ctx *mctx = crypto_shash_ctx(tfm);
-
-	if (keylen != sizeof(mctx->key))
-		return -EINVAL;
-	mctx->key = get_unaligned_le32(key);
-	return 0;
-}
-
-static int chksum_update(struct shash_desc *desc, const u8 *data,
-			 unsigned int length)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	ctx->crc = crc32_mips_le_hw(ctx->crc, data, length);
-	return 0;
-}
-
-static int chksumc_update(struct shash_desc *desc, const u8 *data,
-			 unsigned int length)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	ctx->crc = crc32c_mips_le_hw(ctx->crc, data, length);
-	return 0;
-}
-
-static int chksum_final(struct shash_desc *desc, u8 *out)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	put_unaligned_le32(ctx->crc, out);
-	return 0;
-}
-
-static int chksumc_final(struct shash_desc *desc, u8 *out)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	put_unaligned_le32(~ctx->crc, out);
-	return 0;
-}
-
-static int __chksum_finup(u32 crc, const u8 *data, unsigned int len, u8 *out)
-{
-	put_unaligned_le32(crc32_mips_le_hw(crc, data, len), out);
-	return 0;
-}
-
-static int __chksumc_finup(u32 crc, const u8 *data, unsigned int len, u8 *out)
-{
-	put_unaligned_le32(~crc32c_mips_le_hw(crc, data, len), out);
-	return 0;
-}
-
-static int chksum_finup(struct shash_desc *desc, const u8 *data,
-			unsigned int len, u8 *out)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	return __chksum_finup(ctx->crc, data, len, out);
-}
-
-static int chksumc_finup(struct shash_desc *desc, const u8 *data,
-			unsigned int len, u8 *out)
-{
-	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
-
-	return __chksumc_finup(ctx->crc, data, len, out);
-}
-
-static int chksum_digest(struct shash_desc *desc, const u8 *data,
-			 unsigned int length, u8 *out)
-{
-	struct chksum_ctx *mctx = crypto_shash_ctx(desc->tfm);
-
-	return __chksum_finup(mctx->key, data, length, out);
-}
-
-static int chksumc_digest(struct shash_desc *desc, const u8 *data,
-			 unsigned int length, u8 *out)
-{
-	struct chksum_ctx *mctx = crypto_shash_ctx(desc->tfm);
-
-	return __chksumc_finup(mctx->key, data, length, out);
-}
-
-static int chksum_cra_init(struct crypto_tfm *tfm)
-{
-	struct chksum_ctx *mctx = crypto_tfm_ctx(tfm);
-
-	mctx->key = ~0;
-	return 0;
-}
-
-static struct shash_alg crc32_alg = {
-	.digestsize		=	CHKSUM_DIGEST_SIZE,
-	.setkey			=	chksum_setkey,
-	.init			=	chksum_init,
-	.update			=	chksum_update,
-	.final			=	chksum_final,
-	.finup			=	chksum_finup,
-	.digest			=	chksum_digest,
-	.descsize		=	sizeof(struct chksum_desc_ctx),
-	.base			=	{
-		.cra_name		=	"crc32",
-		.cra_driver_name	=	"crc32-mips-hw",
-		.cra_priority		=	300,
-		.cra_flags		=	CRYPTO_ALG_OPTIONAL_KEY,
-		.cra_blocksize		=	CHKSUM_BLOCK_SIZE,
-		.cra_ctxsize		=	sizeof(struct chksum_ctx),
-		.cra_module		=	THIS_MODULE,
-		.cra_init		=	chksum_cra_init,
-	}
-};
-
-static struct shash_alg crc32c_alg = {
-	.digestsize		=	CHKSUM_DIGEST_SIZE,
-	.setkey			=	chksum_setkey,
-	.init			=	chksum_init,
-	.update			=	chksumc_update,
-	.final			=	chksumc_final,
-	.finup			=	chksumc_finup,
-	.digest			=	chksumc_digest,
-	.descsize		=	sizeof(struct chksum_desc_ctx),
-	.base			=	{
-		.cra_name		=	"crc32c",
-		.cra_driver_name	=	"crc32c-mips-hw",
-		.cra_priority		=	300,
-		.cra_flags		=	CRYPTO_ALG_OPTIONAL_KEY,
-		.cra_blocksize		=	CHKSUM_BLOCK_SIZE,
-		.cra_ctxsize		=	sizeof(struct chksum_ctx),
-		.cra_module		=	THIS_MODULE,
-		.cra_init		=	chksum_cra_init,
-	}
-};
-
-static int __init crc32_mod_init(void)
-{
-	int err;
-
-	err = crypto_register_shash(&crc32_alg);
-
-	if (err)
-		return err;
-
-	err = crypto_register_shash(&crc32c_alg);
-
-	if (err) {
-		crypto_unregister_shash(&crc32_alg);
-		return err;
-	}
-
-	return 0;
-}
-
-static void __exit crc32_mod_exit(void)
-{
-	crypto_unregister_shash(&crc32_alg);
-	crypto_unregister_shash(&crc32c_alg);
-}
-
-MODULE_AUTHOR("Marcin Nowakowski <marcin.nowakowski@mips.com");
-MODULE_DESCRIPTION("CRC32 and CRC32C using optional MIPS instructions");
-MODULE_LICENSE("GPL v2");
-
-module_cpu_feature_match(MIPS_CRC32, crc32_mod_init);
-module_exit(crc32_mod_exit);
diff --git a/arch/mips/crypto/poly1305-glue.c b/arch/mips/crypto/poly1305-glue.c
deleted file mode 100644
index c03ad0bbe69c..000000000000
--- a/arch/mips/crypto/poly1305-glue.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OpenSSL/Cryptogams accelerated Poly1305 transform for MIPS
- *
- * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
- */
-
-#include <linux/unaligned.h>
-#include <crypto/algapi.h>
-#include <crypto/internal/hash.h>
-#include <crypto/internal/poly1305.h>
-#include <linux/cpufeature.h>
-#include <linux/crypto.h>
-#include <linux/module.h>
-
-asmlinkage void poly1305_init_mips(void *state, const u8 *key);
-asmlinkage void poly1305_blocks_mips(void *state, const u8 *src, u32 len, u32 hibit);
-asmlinkage void poly1305_emit_mips(void *state, u8 *digest, const u32 *nonce);
-
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
-{
-	poly1305_init_mips(&dctx->h, key);
-	dctx->s[0] = get_unaligned_le32(key + 16);
-	dctx->s[1] = get_unaligned_le32(key + 20);
-	dctx->s[2] = get_unaligned_le32(key + 24);
-	dctx->s[3] = get_unaligned_le32(key + 28);
-	dctx->buflen = 0;
-}
-EXPORT_SYMBOL(poly1305_init_arch);
-
-static int mips_poly1305_init(struct shash_desc *desc)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	dctx->buflen = 0;
-	dctx->rset = 0;
-	dctx->sset = false;
-
-	return 0;
-}
-
-static void mips_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
-				 u32 len, u32 hibit)
-{
-	if (unlikely(!dctx->sset)) {
-		if (!dctx->rset) {
-			poly1305_init_mips(&dctx->h, src);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->rset = 1;
-		}
-		if (len >= POLY1305_BLOCK_SIZE) {
-			dctx->s[0] = get_unaligned_le32(src +  0);
-			dctx->s[1] = get_unaligned_le32(src +  4);
-			dctx->s[2] = get_unaligned_le32(src +  8);
-			dctx->s[3] = get_unaligned_le32(src + 12);
-			src += POLY1305_BLOCK_SIZE;
-			len -= POLY1305_BLOCK_SIZE;
-			dctx->sset = true;
-		}
-		if (len < POLY1305_BLOCK_SIZE)
-			return;
-	}
-
-	len &= ~(POLY1305_BLOCK_SIZE - 1);
-
-	poly1305_blocks_mips(&dctx->h, src, len, hibit);
-}
-
-static int mips_poly1305_update(struct shash_desc *desc, const u8 *src,
-				unsigned int len)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		len -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			mips_poly1305_blocks(dctx, dctx->buf, POLY1305_BLOCK_SIZE, 1);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(len >= POLY1305_BLOCK_SIZE)) {
-		mips_poly1305_blocks(dctx, src, len, 1);
-		src += round_down(len, POLY1305_BLOCK_SIZE);
-		len %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(len)) {
-		dctx->buflen = len;
-		memcpy(dctx->buf, src, len);
-	}
-	return 0;
-}
-
-void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
-			  unsigned int nbytes)
-{
-	if (unlikely(dctx->buflen)) {
-		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
-
-		memcpy(dctx->buf + dctx->buflen, src, bytes);
-		src += bytes;
-		nbytes -= bytes;
-		dctx->buflen += bytes;
-
-		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
-			poly1305_blocks_mips(&dctx->h, dctx->buf,
-					     POLY1305_BLOCK_SIZE, 1);
-			dctx->buflen = 0;
-		}
-	}
-
-	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
-		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
-
-		poly1305_blocks_mips(&dctx->h, src, len, 1);
-		src += len;
-		nbytes %= POLY1305_BLOCK_SIZE;
-	}
-
-	if (unlikely(nbytes)) {
-		dctx->buflen = nbytes;
-		memcpy(dctx->buf, src, nbytes);
-	}
-}
-EXPORT_SYMBOL(poly1305_update_arch);
-
-void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
-{
-	if (unlikely(dctx->buflen)) {
-		dctx->buf[dctx->buflen++] = 1;
-		memset(dctx->buf + dctx->buflen, 0,
-		       POLY1305_BLOCK_SIZE - dctx->buflen);
-		poly1305_blocks_mips(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
-	}
-
-	poly1305_emit_mips(&dctx->h, dst, dctx->s);
-	*dctx = (struct poly1305_desc_ctx){};
-}
-EXPORT_SYMBOL(poly1305_final_arch);
-
-static int mips_poly1305_final(struct shash_desc *desc, u8 *dst)
-{
-	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
-
-	if (unlikely(!dctx->sset))
-		return -ENOKEY;
-
-	poly1305_final_arch(dctx, dst);
-	return 0;
-}
-
-static struct shash_alg mips_poly1305_alg = {
-	.init			= mips_poly1305_init,
-	.update			= mips_poly1305_update,
-	.final			= mips_poly1305_final,
-	.digestsize		= POLY1305_DIGEST_SIZE,
-	.descsize		= sizeof(struct poly1305_desc_ctx),
-
-	.base.cra_name		= "poly1305",
-	.base.cra_driver_name	= "poly1305-mips",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
-	.base.cra_module	= THIS_MODULE,
-};
-
-static int __init mips_poly1305_mod_init(void)
-{
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shash(&mips_poly1305_alg) : 0;
-}
-
-static void __exit mips_poly1305_mod_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		crypto_unregister_shash(&mips_poly1305_alg);
-}
-
-module_init(mips_poly1305_mod_init);
-module_exit(mips_poly1305_mod_exit);
-
-MODULE_DESCRIPTION("Poly1305 transform (MIPS accelerated");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS_CRYPTO("poly1305");
-MODULE_ALIAS_CRYPTO("poly1305-mips");
diff --git a/arch/mips/crypto/poly1305-mips.pl b/arch/mips/crypto/poly1305-mips.pl
deleted file mode 100644
index b05bab884ed2..000000000000
--- a/arch/mips/crypto/poly1305-mips.pl
+++ /dev/null
@@ -1,1273 +0,0 @@
-#!/usr/bin/env perl
-# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause
-#
-# ====================================================================
-# Written by Andy Polyakov, @dot-asm, originally for the OpenSSL
-# project.
-# ====================================================================
-
-# Poly1305 hash for MIPS.
-#
-# May 2016
-#
-# Numbers are cycles per processed byte with poly1305_blocks alone.
-#
-#		IALU/gcc
-# R1x000	~5.5/+130%	(big-endian)
-# Octeon II	2.50/+70%	(little-endian)
-#
-# March 2019
-#
-# Add 32-bit code path.
-#
-# October 2019
-#
-# Modulo-scheduling reduction allows to omit dependency chain at the
-# end of inner loop and improve performance. Also optimize MIPS32R2
-# code path for MIPS 1004K core. Per René von Dorst's suggestions.
-#
-#		IALU/gcc
-# R1x000	~9.8/?		(big-endian)
-# Octeon II	3.65/+140%	(little-endian)
-# MT7621/1004K	4.75/?		(little-endian)
-#
-######################################################################
-# There is a number of MIPS ABI in use, O32 and N32/64 are most
-# widely used. Then there is a new contender: NUBI. It appears that if
-# one picks the latter, it's possible to arrange code in ABI neutral
-# manner. Therefore let's stick to NUBI register layout:
-#
-($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
-($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
-($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
-($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
-#
-# The return value is placed in $a0. Following coding rules facilitate
-# interoperability:
-#
-# - never ever touch $tp, "thread pointer", former $gp [o32 can be
-#   excluded from the rule, because it's specified volatile];
-# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
-#   old code];
-# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
-#
-# For reference here is register layout for N32/64 MIPS ABIs:
-#
-# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
-# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
-# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
-# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
-# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
-#
-# <appro@openssl.org>
-#
-######################################################################
-
-$flavour = shift || "64"; # supported flavours are o32,n32,64,nubi32,nubi64
-
-$v0 = ($flavour =~ /nubi/i) ? $a0 : $t0;
-
-if ($flavour =~ /64|n32/i) {{{
-######################################################################
-# 64-bit code path
-#
-
-my ($ctx,$inp,$len,$padbit) = ($a0,$a1,$a2,$a3);
-my ($in0,$in1,$tmp0,$tmp1,$tmp2,$tmp3,$tmp4) = ($a4,$a5,$a6,$a7,$at,$t0,$t1);
-
-$code.=<<___;
-#if (defined(_MIPS_ARCH_MIPS64R3) || defined(_MIPS_ARCH_MIPS64R5) || \\
-     defined(_MIPS_ARCH_MIPS64R6)) \\
-     && !defined(_MIPS_ARCH_MIPS64R2)
-# define _MIPS_ARCH_MIPS64R2
-#endif
-
-#if defined(_MIPS_ARCH_MIPS64R6)
-# define dmultu(rs,rt)
-# define mflo(rd,rs,rt)	dmulu	rd,rs,rt
-# define mfhi(rd,rs,rt)	dmuhu	rd,rs,rt
-#else
-# define dmultu(rs,rt)		dmultu	rs,rt
-# define mflo(rd,rs,rt)	mflo	rd
-# define mfhi(rd,rs,rt)	mfhi	rd
-#endif
-
-#ifdef	__KERNEL__
-# define poly1305_init   poly1305_init_mips
-# define poly1305_blocks poly1305_blocks_mips
-# define poly1305_emit   poly1305_emit_mips
-#endif
-
-#if defined(__MIPSEB__) && !defined(MIPSEB)
-# define MIPSEB
-#endif
-
-#ifdef MIPSEB
-# define MSB 0
-# define LSB 7
-#else
-# define MSB 7
-# define LSB 0
-#endif
-
-.text
-.set	noat
-.set	noreorder
-
-.align	5
-.globl	poly1305_init
-.ent	poly1305_init
-poly1305_init:
-	.frame	$sp,0,$ra
-	.set	reorder
-
-	sd	$zero,0($ctx)
-	sd	$zero,8($ctx)
-	sd	$zero,16($ctx)
-
-	beqz	$inp,.Lno_key
-
-#if defined(_MIPS_ARCH_MIPS64R6)
-	andi	$tmp0,$inp,7		# $inp % 8
-	dsubu	$inp,$inp,$tmp0		# align $inp
-	sll	$tmp0,$tmp0,3		# byte to bit offset
-	ld	$in0,0($inp)
-	ld	$in1,8($inp)
-	beqz	$tmp0,.Laligned_key
-	ld	$tmp2,16($inp)
-
-	subu	$tmp1,$zero,$tmp0
-# ifdef	MIPSEB
-	dsllv	$in0,$in0,$tmp0
-	dsrlv	$tmp3,$in1,$tmp1
-	dsllv	$in1,$in1,$tmp0
-	dsrlv	$tmp2,$tmp2,$tmp1
-# else
-	dsrlv	$in0,$in0,$tmp0
-	dsllv	$tmp3,$in1,$tmp1
-	dsrlv	$in1,$in1,$tmp0
-	dsllv	$tmp2,$tmp2,$tmp1
-# endif
-	or	$in0,$in0,$tmp3
-	or	$in1,$in1,$tmp2
-.Laligned_key:
-#else
-	ldl	$in0,0+MSB($inp)
-	ldl	$in1,8+MSB($inp)
-	ldr	$in0,0+LSB($inp)
-	ldr	$in1,8+LSB($inp)
-#endif
-#ifdef	MIPSEB
-# if defined(_MIPS_ARCH_MIPS64R2)
-	dsbh	$in0,$in0		# byte swap
-	 dsbh	$in1,$in1
-	dshd	$in0,$in0
-	 dshd	$in1,$in1
-# else
-	ori	$tmp0,$zero,0xFF
-	dsll	$tmp2,$tmp0,32
-	or	$tmp0,$tmp2		# 0x000000FF000000FF
-
-	and	$tmp1,$in0,$tmp0	# byte swap
-	 and	$tmp3,$in1,$tmp0
-	dsrl	$tmp2,$in0,24
-	 dsrl	$tmp4,$in1,24
-	dsll	$tmp1,24
-	 dsll	$tmp3,24
-	and	$tmp2,$tmp0
-	 and	$tmp4,$tmp0
-	dsll	$tmp0,8			# 0x0000FF000000FF00
-	or	$tmp1,$tmp2
-	 or	$tmp3,$tmp4
-	and	$tmp2,$in0,$tmp0
-	 and	$tmp4,$in1,$tmp0
-	dsrl	$in0,8
-	 dsrl	$in1,8
-	dsll	$tmp2,8
-	 dsll	$tmp4,8
-	and	$in0,$tmp0
-	 and	$in1,$tmp0
-	or	$tmp1,$tmp2
-	 or	$tmp3,$tmp4
-	or	$in0,$tmp1
-	 or	$in1,$tmp3
-	dsrl	$tmp1,$in0,32
-	 dsrl	$tmp3,$in1,32
-	dsll	$in0,32
-	 dsll	$in1,32
-	or	$in0,$tmp1
-	 or	$in1,$tmp3
-# endif
-#endif
-	li	$tmp0,1
-	dsll	$tmp0,32		# 0x0000000100000000
-	daddiu	$tmp0,-63		# 0x00000000ffffffc1
-	dsll	$tmp0,28		# 0x0ffffffc10000000
-	daddiu	$tmp0,-1		# 0x0ffffffc0fffffff
-
-	and	$in0,$tmp0
-	daddiu	$tmp0,-3		# 0x0ffffffc0ffffffc
-	and	$in1,$tmp0
-
-	sd	$in0,24($ctx)
-	dsrl	$tmp0,$in1,2
-	sd	$in1,32($ctx)
-	daddu	$tmp0,$in1		# s1 = r1 + (r1 >> 2)
-	sd	$tmp0,40($ctx)
-
-.Lno_key:
-	li	$v0,0			# return 0
-	jr	$ra
-.end	poly1305_init
-___
-{
-my $SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0x0003f000" : "0x00030000";
-
-my ($h0,$h1,$h2,$r0,$r1,$rs1,$d0,$d1,$d2) =
-   ($s0,$s1,$s2,$s3,$s4,$s5,$in0,$in1,$t2);
-my ($shr,$shl) = ($s6,$s7);		# used on R6
-
-$code.=<<___;
-.align	5
-.globl	poly1305_blocks
-.ent	poly1305_blocks
-poly1305_blocks:
-	.set	noreorder
-	dsrl	$len,4			# number of complete blocks
-	bnez	$len,poly1305_blocks_internal
-	nop
-	jr	$ra
-	nop
-.end	poly1305_blocks
-
-.align	5
-.ent	poly1305_blocks_internal
-poly1305_blocks_internal:
-	.set	noreorder
-#if defined(_MIPS_ARCH_MIPS64R6)
-	.frame	$sp,8*8,$ra
-	.mask	$SAVED_REGS_MASK|0x000c0000,-8
-	dsubu	$sp,8*8
-	sd	$s7,56($sp)
-	sd	$s6,48($sp)
-#else
-	.frame	$sp,6*8,$ra
-	.mask	$SAVED_REGS_MASK,-8
-	dsubu	$sp,6*8
-#endif
-	sd	$s5,40($sp)
-	sd	$s4,32($sp)
-___
-$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi prologue
-	sd	$s3,24($sp)
-	sd	$s2,16($sp)
-	sd	$s1,8($sp)
-	sd	$s0,0($sp)
-___
-$code.=<<___;
-	.set	reorder
-
-#if defined(_MIPS_ARCH_MIPS64R6)
-	andi	$shr,$inp,7
-	dsubu	$inp,$inp,$shr		# align $inp
-	sll	$shr,$shr,3		# byte to bit offset
-	subu	$shl,$zero,$shr
-#endif
-
-	ld	$h0,0($ctx)		# load hash value
-	ld	$h1,8($ctx)
-	ld	$h2,16($ctx)
-
-	ld	$r0,24($ctx)		# load key
-	ld	$r1,32($ctx)
-	ld	$rs1,40($ctx)
-
-	dsll	$len,4
-	daddu	$len,$inp		# end of buffer
-	b	.Loop
-
-.align	4
-.Loop:
-#if defined(_MIPS_ARCH_MIPS64R6)
-	ld	$in0,0($inp)		# load input
-	ld	$in1,8($inp)
-	beqz	$shr,.Laligned_inp
-
-	ld	$tmp2,16($inp)
-# ifdef	MIPSEB
-	dsllv	$in0,$in0,$shr
-	dsrlv	$tmp3,$in1,$shl
-	dsllv	$in1,$in1,$shr
-	dsrlv	$tmp2,$tmp2,$shl
-# else
-	dsrlv	$in0,$in0,$shr
-	dsllv	$tmp3,$in1,$shl
-	dsrlv	$in1,$in1,$shr
-	dsllv	$tmp2,$tmp2,$shl
-# endif
-	or	$in0,$in0,$tmp3
-	or	$in1,$in1,$tmp2
-.Laligned_inp:
-#else
-	ldl	$in0,0+MSB($inp)	# load input
-	ldl	$in1,8+MSB($inp)
-	ldr	$in0,0+LSB($inp)
-	ldr	$in1,8+LSB($inp)
-#endif
-	daddiu	$inp,16
-#ifdef	MIPSEB
-# if defined(_MIPS_ARCH_MIPS64R2)
-	dsbh	$in0,$in0		# byte swap
-	 dsbh	$in1,$in1
-	dshd	$in0,$in0
-	 dshd	$in1,$in1
-# else
-	ori	$tmp0,$zero,0xFF
-	dsll	$tmp2,$tmp0,32
-	or	$tmp0,$tmp2		# 0x000000FF000000FF
-
-	and	$tmp1,$in0,$tmp0	# byte swap
-	 and	$tmp3,$in1,$tmp0
-	dsrl	$tmp2,$in0,24
-	 dsrl	$tmp4,$in1,24
-	dsll	$tmp1,24
-	 dsll	$tmp3,24
-	and	$tmp2,$tmp0
-	 and	$tmp4,$tmp0
-	dsll	$tmp0,8			# 0x0000FF000000FF00
-	or	$tmp1,$tmp2
-	 or	$tmp3,$tmp4
-	and	$tmp2,$in0,$tmp0
-	 and	$tmp4,$in1,$tmp0
-	dsrl	$in0,8
-	 dsrl	$in1,8
-	dsll	$tmp2,8
-	 dsll	$tmp4,8
-	and	$in0,$tmp0
-	 and	$in1,$tmp0
-	or	$tmp1,$tmp2
-	 or	$tmp3,$tmp4
-	or	$in0,$tmp1
-	 or	$in1,$tmp3
-	dsrl	$tmp1,$in0,32
-	 dsrl	$tmp3,$in1,32
-	dsll	$in0,32
-	 dsll	$in1,32
-	or	$in0,$tmp1
-	 or	$in1,$tmp3
-# endif
-#endif
-	dsrl	$tmp1,$h2,2		# modulo-scheduled reduction
-	andi	$h2,$h2,3
-	dsll	$tmp0,$tmp1,2
-
-	daddu	$d0,$h0,$in0		# accumulate input
-	 daddu	$tmp1,$tmp0
-	sltu	$tmp0,$d0,$h0
-	daddu	$d0,$d0,$tmp1		# ... and residue
-	sltu	$tmp1,$d0,$tmp1
-	daddu	$d1,$h1,$in1
-	daddu	$tmp0,$tmp1
-	sltu	$tmp1,$d1,$h1
-	daddu	$d1,$tmp0
-
-	dmultu	($r0,$d0)		# h0*r0
-	 daddu	$d2,$h2,$padbit
-	 sltu	$tmp0,$d1,$tmp0
-	mflo	($h0,$r0,$d0)
-	mfhi	($h1,$r0,$d0)
-
-	dmultu	($rs1,$d1)		# h1*5*r1
-	 daddu	$d2,$tmp1
-	 daddu	$d2,$tmp0
-	mflo	($tmp0,$rs1,$d1)
-	mfhi	($tmp1,$rs1,$d1)
-
-	dmultu	($r1,$d0)		# h0*r1
-	mflo	($tmp2,$r1,$d0)
-	mfhi	($h2,$r1,$d0)
-	 daddu	$h0,$tmp0
-	 daddu	$h1,$tmp1
-	 sltu	$tmp0,$h0,$tmp0
-
-	dmultu	($r0,$d1)		# h1*r0
-	 daddu	$h1,$tmp0
-	 daddu	$h1,$tmp2
-	mflo	($tmp0,$r0,$d1)
-	mfhi	($tmp1,$r0,$d1)
-
-	dmultu	($rs1,$d2)		# h2*5*r1
-	 sltu	$tmp2,$h1,$tmp2
-	 daddu	$h2,$tmp2
-	mflo	($tmp2,$rs1,$d2)
-
-	dmultu	($r0,$d2)		# h2*r0
-	 daddu	$h1,$tmp0
-	 daddu	$h2,$tmp1
-	mflo	($tmp3,$r0,$d2)
-	 sltu	$tmp0,$h1,$tmp0
-	 daddu	$h2,$tmp0
-
-	daddu	$h1,$tmp2
-	sltu	$tmp2,$h1,$tmp2
-	daddu	$h2,$tmp2
-	daddu	$h2,$tmp3
-
-	bne	$inp,$len,.Loop
-
-	sd	$h0,0($ctx)		# store hash value
-	sd	$h1,8($ctx)
-	sd	$h2,16($ctx)
-
-	.set	noreorder
-#if defined(_MIPS_ARCH_MIPS64R6)
-	ld	$s7,56($sp)
-	ld	$s6,48($sp)
-#endif
-	ld	$s5,40($sp)		# epilogue
-	ld	$s4,32($sp)
-___
-$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi epilogue
-	ld	$s3,24($sp)
-	ld	$s2,16($sp)
-	ld	$s1,8($sp)
-	ld	$s0,0($sp)
-___
-$code.=<<___;
-	jr	$ra
-#if defined(_MIPS_ARCH_MIPS64R6)
-	daddu	$sp,8*8
-#else
-	daddu	$sp,6*8
-#endif
-.end	poly1305_blocks_internal
-___
-}
-{
-my ($ctx,$mac,$nonce) = ($a0,$a1,$a2);
-
-$code.=<<___;
-.align	5
-.globl	poly1305_emit
-.ent	poly1305_emit
-poly1305_emit:
-	.frame	$sp,0,$ra
-	.set	reorder
-
-	ld	$tmp2,16($ctx)
-	ld	$tmp0,0($ctx)
-	ld	$tmp1,8($ctx)
-
-	li	$in0,-4			# final reduction
-	dsrl	$in1,$tmp2,2
-	and	$in0,$tmp2
-	andi	$tmp2,$tmp2,3
-	daddu	$in0,$in1
-
-	daddu	$tmp0,$tmp0,$in0
-	sltu	$in1,$tmp0,$in0
-	 daddiu	$in0,$tmp0,5		# compare to modulus
-	daddu	$tmp1,$tmp1,$in1
-	 sltiu	$tmp3,$in0,5
-	sltu	$tmp4,$tmp1,$in1
-	 daddu	$in1,$tmp1,$tmp3
-	daddu	$tmp2,$tmp2,$tmp4
-	 sltu	$tmp3,$in1,$tmp3
-	 daddu	$tmp2,$tmp2,$tmp3
-
-	dsrl	$tmp2,2			# see if it carried/borrowed
-	dsubu	$tmp2,$zero,$tmp2
-
-	xor	$in0,$tmp0
-	xor	$in1,$tmp1
-	and	$in0,$tmp2
-	and	$in1,$tmp2
-	xor	$in0,$tmp0
-	xor	$in1,$tmp1
-
-	lwu	$tmp0,0($nonce)		# load nonce
-	lwu	$tmp1,4($nonce)
-	lwu	$tmp2,8($nonce)
-	lwu	$tmp3,12($nonce)
-	dsll	$tmp1,32
-	dsll	$tmp3,32
-	or	$tmp0,$tmp1
-	or	$tmp2,$tmp3
-
-	daddu	$in0,$tmp0		# accumulate nonce
-	daddu	$in1,$tmp2
-	sltu	$tmp0,$in0,$tmp0
-	daddu	$in1,$tmp0
-
-	dsrl	$tmp0,$in0,8		# write mac value
-	dsrl	$tmp1,$in0,16
-	dsrl	$tmp2,$in0,24
-	sb	$in0,0($mac)
-	dsrl	$tmp3,$in0,32
-	sb	$tmp0,1($mac)
-	dsrl	$tmp0,$in0,40
-	sb	$tmp1,2($mac)
-	dsrl	$tmp1,$in0,48
-	sb	$tmp2,3($mac)
-	dsrl	$tmp2,$in0,56
-	sb	$tmp3,4($mac)
-	dsrl	$tmp3,$in1,8
-	sb	$tmp0,5($mac)
-	dsrl	$tmp0,$in1,16
-	sb	$tmp1,6($mac)
-	dsrl	$tmp1,$in1,24
-	sb	$tmp2,7($mac)
-
-	sb	$in1,8($mac)
-	dsrl	$tmp2,$in1,32
-	sb	$tmp3,9($mac)
-	dsrl	$tmp3,$in1,40
-	sb	$tmp0,10($mac)
-	dsrl	$tmp0,$in1,48
-	sb	$tmp1,11($mac)
-	dsrl	$tmp1,$in1,56
-	sb	$tmp2,12($mac)
-	sb	$tmp3,13($mac)
-	sb	$tmp0,14($mac)
-	sb	$tmp1,15($mac)
-
-	jr	$ra
-.end	poly1305_emit
-.rdata
-.asciiz	"Poly1305 for MIPS64, CRYPTOGAMS by \@dot-asm"
-.align	2
-___
-}
-}}} else {{{
-######################################################################
-# 32-bit code path
-#
-
-my ($ctx,$inp,$len,$padbit) = ($a0,$a1,$a2,$a3);
-my ($in0,$in1,$in2,$in3,$tmp0,$tmp1,$tmp2,$tmp3) =
-   ($a4,$a5,$a6,$a7,$at,$t0,$t1,$t2);
-
-$code.=<<___;
-#if (defined(_MIPS_ARCH_MIPS32R3) || defined(_MIPS_ARCH_MIPS32R5) || \\
-     defined(_MIPS_ARCH_MIPS32R6)) \\
-     && !defined(_MIPS_ARCH_MIPS32R2)
-# define _MIPS_ARCH_MIPS32R2
-#endif
-
-#if defined(_MIPS_ARCH_MIPS32R6)
-# define multu(rs,rt)
-# define mflo(rd,rs,rt)	mulu	rd,rs,rt
-# define mfhi(rd,rs,rt)	muhu	rd,rs,rt
-#else
-# define multu(rs,rt)	multu	rs,rt
-# define mflo(rd,rs,rt)	mflo	rd
-# define mfhi(rd,rs,rt)	mfhi	rd
-#endif
-
-#ifdef	__KERNEL__
-# define poly1305_init   poly1305_init_mips
-# define poly1305_blocks poly1305_blocks_mips
-# define poly1305_emit   poly1305_emit_mips
-#endif
-
-#if defined(__MIPSEB__) && !defined(MIPSEB)
-# define MIPSEB
-#endif
-
-#ifdef MIPSEB
-# define MSB 0
-# define LSB 3
-#else
-# define MSB 3
-# define LSB 0
-#endif
-
-.text
-.set	noat
-.set	noreorder
-
-.align	5
-.globl	poly1305_init
-.ent	poly1305_init
-poly1305_init:
-	.frame	$sp,0,$ra
-	.set	reorder
-
-	sw	$zero,0($ctx)
-	sw	$zero,4($ctx)
-	sw	$zero,8($ctx)
-	sw	$zero,12($ctx)
-	sw	$zero,16($ctx)
-
-	beqz	$inp,.Lno_key
-
-#if defined(_MIPS_ARCH_MIPS32R6)
-	andi	$tmp0,$inp,3		# $inp % 4
-	subu	$inp,$inp,$tmp0		# align $inp
-	sll	$tmp0,$tmp0,3		# byte to bit offset
-	lw	$in0,0($inp)
-	lw	$in1,4($inp)
-	lw	$in2,8($inp)
-	lw	$in3,12($inp)
-	beqz	$tmp0,.Laligned_key
-
-	lw	$tmp2,16($inp)
-	subu	$tmp1,$zero,$tmp0
-# ifdef	MIPSEB
-	sllv	$in0,$in0,$tmp0
-	srlv	$tmp3,$in1,$tmp1
-	sllv	$in1,$in1,$tmp0
-	or	$in0,$in0,$tmp3
-	srlv	$tmp3,$in2,$tmp1
-	sllv	$in2,$in2,$tmp0
-	or	$in1,$in1,$tmp3
-	srlv	$tmp3,$in3,$tmp1
-	sllv	$in3,$in3,$tmp0
-	or	$in2,$in2,$tmp3
-	srlv	$tmp2,$tmp2,$tmp1
-	or	$in3,$in3,$tmp2
-# else
-	srlv	$in0,$in0,$tmp0
-	sllv	$tmp3,$in1,$tmp1
-	srlv	$in1,$in1,$tmp0
-	or	$in0,$in0,$tmp3
-	sllv	$tmp3,$in2,$tmp1
-	srlv	$in2,$in2,$tmp0
-	or	$in1,$in1,$tmp3
-	sllv	$tmp3,$in3,$tmp1
-	srlv	$in3,$in3,$tmp0
-	or	$in2,$in2,$tmp3
-	sllv	$tmp2,$tmp2,$tmp1
-	or	$in3,$in3,$tmp2
-# endif
-.Laligned_key:
-#else
-	lwl	$in0,0+MSB($inp)
-	lwl	$in1,4+MSB($inp)
-	lwl	$in2,8+MSB($inp)
-	lwl	$in3,12+MSB($inp)
-	lwr	$in0,0+LSB($inp)
-	lwr	$in1,4+LSB($inp)
-	lwr	$in2,8+LSB($inp)
-	lwr	$in3,12+LSB($inp)
-#endif
-#ifdef	MIPSEB
-# if defined(_MIPS_ARCH_MIPS32R2)
-	wsbh	$in0,$in0		# byte swap
-	wsbh	$in1,$in1
-	wsbh	$in2,$in2
-	wsbh	$in3,$in3
-	rotr	$in0,$in0,16
-	rotr	$in1,$in1,16
-	rotr	$in2,$in2,16
-	rotr	$in3,$in3,16
-# else
-	srl	$tmp0,$in0,24		# byte swap
-	srl	$tmp1,$in0,8
-	andi	$tmp2,$in0,0xFF00
-	sll	$in0,$in0,24
-	andi	$tmp1,0xFF00
-	sll	$tmp2,$tmp2,8
-	or	$in0,$tmp0
-	 srl	$tmp0,$in1,24
-	or	$tmp1,$tmp2
-	 srl	$tmp2,$in1,8
-	or	$in0,$tmp1
-	 andi	$tmp1,$in1,0xFF00
-	 sll	$in1,$in1,24
-	 andi	$tmp2,0xFF00
-	 sll	$tmp1,$tmp1,8
-	 or	$in1,$tmp0
-	srl	$tmp0,$in2,24
-	 or	$tmp2,$tmp1
-	srl	$tmp1,$in2,8
-	 or	$in1,$tmp2
-	andi	$tmp2,$in2,0xFF00
-	sll	$in2,$in2,24
-	andi	$tmp1,0xFF00
-	sll	$tmp2,$tmp2,8
-	or	$in2,$tmp0
-	 srl	$tmp0,$in3,24
-	or	$tmp1,$tmp2
-	 srl	$tmp2,$in3,8
-	or	$in2,$tmp1
-	 andi	$tmp1,$in3,0xFF00
-	 sll	$in3,$in3,24
-	 andi	$tmp2,0xFF00
-	 sll	$tmp1,$tmp1,8
-	 or	$in3,$tmp0
-	 or	$tmp2,$tmp1
-	 or	$in3,$tmp2
-# endif
-#endif
-	lui	$tmp0,0x0fff
-	ori	$tmp0,0xffff		# 0x0fffffff
-	and	$in0,$in0,$tmp0
-	subu	$tmp0,3			# 0x0ffffffc
-	and	$in1,$in1,$tmp0
-	and	$in2,$in2,$tmp0
-	and	$in3,$in3,$tmp0
-
-	sw	$in0,20($ctx)
-	sw	$in1,24($ctx)
-	sw	$in2,28($ctx)
-	sw	$in3,32($ctx)
-
-	srl	$tmp1,$in1,2
-	srl	$tmp2,$in2,2
-	srl	$tmp3,$in3,2
-	addu	$in1,$in1,$tmp1		# s1 = r1 + (r1 >> 2)
-	addu	$in2,$in2,$tmp2
-	addu	$in3,$in3,$tmp3
-	sw	$in1,36($ctx)
-	sw	$in2,40($ctx)
-	sw	$in3,44($ctx)
-.Lno_key:
-	li	$v0,0
-	jr	$ra
-.end	poly1305_init
-___
-{
-my $SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0x00fff000" : "0x00ff0000";
-
-my ($h0,$h1,$h2,$h3,$h4, $r0,$r1,$r2,$r3, $rs1,$rs2,$rs3) =
-   ($s0,$s1,$s2,$s3,$s4, $s5,$s6,$s7,$s8, $s9,$s10,$s11);
-my ($d0,$d1,$d2,$d3) =
-   ($a4,$a5,$a6,$a7);
-my $shr = $t2;		# used on R6
-my $one = $t2;		# used on R2
-
-$code.=<<___;
-.globl	poly1305_blocks
-.align	5
-.ent	poly1305_blocks
-poly1305_blocks:
-	.frame	$sp,16*4,$ra
-	.mask	$SAVED_REGS_MASK,-4
-	.set	noreorder
-	subu	$sp, $sp,4*12
-	sw	$s11,4*11($sp)
-	sw	$s10,4*10($sp)
-	sw	$s9, 4*9($sp)
-	sw	$s8, 4*8($sp)
-	sw	$s7, 4*7($sp)
-	sw	$s6, 4*6($sp)
-	sw	$s5, 4*5($sp)
-	sw	$s4, 4*4($sp)
-___
-$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi prologue
-	sw	$s3, 4*3($sp)
-	sw	$s2, 4*2($sp)
-	sw	$s1, 4*1($sp)
-	sw	$s0, 4*0($sp)
-___
-$code.=<<___;
-	.set	reorder
-
-	srl	$len,4			# number of complete blocks
-	li	$one,1
-	beqz	$len,.Labort
-
-#if defined(_MIPS_ARCH_MIPS32R6)
-	andi	$shr,$inp,3
-	subu	$inp,$inp,$shr		# align $inp
-	sll	$shr,$shr,3		# byte to bit offset
-#endif
-
-	lw	$h0,0($ctx)		# load hash value
-	lw	$h1,4($ctx)
-	lw	$h2,8($ctx)
-	lw	$h3,12($ctx)
-	lw	$h4,16($ctx)
-
-	lw	$r0,20($ctx)		# load key
-	lw	$r1,24($ctx)
-	lw	$r2,28($ctx)
-	lw	$r3,32($ctx)
-	lw	$rs1,36($ctx)
-	lw	$rs2,40($ctx)
-	lw	$rs3,44($ctx)
-
-	sll	$len,4
-	addu	$len,$len,$inp		# end of buffer
-	b	.Loop
-
-.align	4
-.Loop:
-#if defined(_MIPS_ARCH_MIPS32R6)
-	lw	$d0,0($inp)		# load input
-	lw	$d1,4($inp)
-	lw	$d2,8($inp)
-	lw	$d3,12($inp)
-	beqz	$shr,.Laligned_inp
-
-	lw	$t0,16($inp)
-	subu	$t1,$zero,$shr
-# ifdef	MIPSEB
-	sllv	$d0,$d0,$shr
-	srlv	$at,$d1,$t1
-	sllv	$d1,$d1,$shr
-	or	$d0,$d0,$at
-	srlv	$at,$d2,$t1
-	sllv	$d2,$d2,$shr
-	or	$d1,$d1,$at
-	srlv	$at,$d3,$t1
-	sllv	$d3,$d3,$shr
-	or	$d2,$d2,$at
-	srlv	$t0,$t0,$t1
-	or	$d3,$d3,$t0
-# else
-	srlv	$d0,$d0,$shr
-	sllv	$at,$d1,$t1
-	srlv	$d1,$d1,$shr
-	or	$d0,$d0,$at
-	sllv	$at,$d2,$t1
-	srlv	$d2,$d2,$shr
-	or	$d1,$d1,$at
-	sllv	$at,$d3,$t1
-	srlv	$d3,$d3,$shr
-	or	$d2,$d2,$at
-	sllv	$t0,$t0,$t1
-	or	$d3,$d3,$t0
-# endif
-.Laligned_inp:
-#else
-	lwl	$d0,0+MSB($inp)		# load input
-	lwl	$d1,4+MSB($inp)
-	lwl	$d2,8+MSB($inp)
-	lwl	$d3,12+MSB($inp)
-	lwr	$d0,0+LSB($inp)
-	lwr	$d1,4+LSB($inp)
-	lwr	$d2,8+LSB($inp)
-	lwr	$d3,12+LSB($inp)
-#endif
-#ifdef	MIPSEB
-# if defined(_MIPS_ARCH_MIPS32R2)
-	wsbh	$d0,$d0			# byte swap
-	wsbh	$d1,$d1
-	wsbh	$d2,$d2
-	wsbh	$d3,$d3
-	rotr	$d0,$d0,16
-	rotr	$d1,$d1,16
-	rotr	$d2,$d2,16
-	rotr	$d3,$d3,16
-# else
-	srl	$at,$d0,24		# byte swap
-	srl	$t0,$d0,8
-	andi	$t1,$d0,0xFF00
-	sll	$d0,$d0,24
-	andi	$t0,0xFF00
-	sll	$t1,$t1,8
-	or	$d0,$at
-	 srl	$at,$d1,24
-	or	$t0,$t1
-	 srl	$t1,$d1,8
-	or	$d0,$t0
-	 andi	$t0,$d1,0xFF00
-	 sll	$d1,$d1,24
-	 andi	$t1,0xFF00
-	 sll	$t0,$t0,8
-	 or	$d1,$at
-	srl	$at,$d2,24
-	 or	$t1,$t0
-	srl	$t0,$d2,8
-	 or	$d1,$t1
-	andi	$t1,$d2,0xFF00
-	sll	$d2,$d2,24
-	andi	$t0,0xFF00
-	sll	$t1,$t1,8
-	or	$d2,$at
-	 srl	$at,$d3,24
-	or	$t0,$t1
-	 srl	$t1,$d3,8
-	or	$d2,$t0
-	 andi	$t0,$d3,0xFF00
-	 sll	$d3,$d3,24
-	 andi	$t1,0xFF00
-	 sll	$t0,$t0,8
-	 or	$d3,$at
-	 or	$t1,$t0
-	 or	$d3,$t1
-# endif
-#endif
-	srl	$t0,$h4,2		# modulo-scheduled reduction
-	andi	$h4,$h4,3
-	sll	$at,$t0,2
-
-	addu	$d0,$d0,$h0		# accumulate input
-	 addu	$t0,$t0,$at
-	sltu	$h0,$d0,$h0
-	addu	$d0,$d0,$t0		# ... and residue
-	sltu	$at,$d0,$t0
-
-	addu	$d1,$d1,$h1
-	 addu	$h0,$h0,$at		# carry
-	sltu	$h1,$d1,$h1
-	addu	$d1,$d1,$h0
-	sltu	$h0,$d1,$h0
-
-	addu	$d2,$d2,$h2
-	 addu	$h1,$h1,$h0		# carry
-	sltu	$h2,$d2,$h2
-	addu	$d2,$d2,$h1
-	sltu	$h1,$d2,$h1
-
-	addu	$d3,$d3,$h3
-	 addu	$h2,$h2,$h1		# carry
-	sltu	$h3,$d3,$h3
-	addu	$d3,$d3,$h2
-
-#if defined(_MIPS_ARCH_MIPS32R2) && !defined(_MIPS_ARCH_MIPS32R6)
-	multu	$r0,$d0			# d0*r0
-	 sltu	$h2,$d3,$h2
-	maddu	$rs3,$d1		# d1*s3
-	 addu	$h3,$h3,$h2		# carry
-	maddu	$rs2,$d2		# d2*s2
-	 addu	$h4,$h4,$padbit
-	maddu	$rs1,$d3		# d3*s1
-	 addu	$h4,$h4,$h3
-	mfhi	$at
-	mflo	$h0
-
-	multu	$r1,$d0			# d0*r1
-	maddu	$r0,$d1			# d1*r0
-	maddu	$rs3,$d2		# d2*s3
-	maddu	$rs2,$d3		# d3*s2
-	maddu	$rs1,$h4		# h4*s1
-	maddu	$at,$one		# hi*1
-	mfhi	$at
-	mflo	$h1
-
-	multu	$r2,$d0			# d0*r2
-	maddu	$r1,$d1			# d1*r1
-	maddu	$r0,$d2			# d2*r0
-	maddu	$rs3,$d3		# d3*s3
-	maddu	$rs2,$h4		# h4*s2
-	maddu	$at,$one		# hi*1
-	mfhi	$at
-	mflo	$h2
-
-	mul	$t0,$r0,$h4		# h4*r0
-
-	multu	$r3,$d0			# d0*r3
-	maddu	$r2,$d1			# d1*r2
-	maddu	$r1,$d2			# d2*r1
-	maddu	$r0,$d3			# d3*r0
-	maddu	$rs3,$h4		# h4*s3
-	maddu	$at,$one		# hi*1
-	mfhi	$at
-	mflo	$h3
-
-	 addiu	$inp,$inp,16
-
-	addu	$h4,$t0,$at
-#else
-	multu	($r0,$d0)		# d0*r0
-	mflo	($h0,$r0,$d0)
-	mfhi	($h1,$r0,$d0)
-
-	 sltu	$h2,$d3,$h2
-	 addu	$h3,$h3,$h2		# carry
-
-	multu	($rs3,$d1)		# d1*s3
-	mflo	($at,$rs3,$d1)
-	mfhi	($t0,$rs3,$d1)
-
-	 addu	$h4,$h4,$padbit
-	 addiu	$inp,$inp,16
-	 addu	$h4,$h4,$h3
-
-	multu	($rs2,$d2)		# d2*s2
-	mflo	($a3,$rs2,$d2)
-	mfhi	($t1,$rs2,$d2)
-	 addu	$h0,$h0,$at
-	 addu	$h1,$h1,$t0
-	multu	($rs1,$d3)		# d3*s1
-	 sltu	$at,$h0,$at
-	 addu	$h1,$h1,$at
-
-	mflo	($at,$rs1,$d3)
-	mfhi	($t0,$rs1,$d3)
-	 addu	$h0,$h0,$a3
-	 addu	$h1,$h1,$t1
-	multu	($r1,$d0)		# d0*r1
-	 sltu	$a3,$h0,$a3
-	 addu	$h1,$h1,$a3
-
-
-	mflo	($a3,$r1,$d0)
-	mfhi	($h2,$r1,$d0)
-	 addu	$h0,$h0,$at
-	 addu	$h1,$h1,$t0
-	multu	($r0,$d1)		# d1*r0
-	 sltu	$at,$h0,$at
-	 addu	$h1,$h1,$at
-
-	mflo	($at,$r0,$d1)
-	mfhi	($t0,$r0,$d1)
-	 addu	$h1,$h1,$a3
-	 sltu	$a3,$h1,$a3
-	multu	($rs3,$d2)		# d2*s3
-	 addu	$h2,$h2,$a3
-
-	mflo	($a3,$rs3,$d2)
-	mfhi	($t1,$rs3,$d2)
-	 addu	$h1,$h1,$at
-	 addu	$h2,$h2,$t0
-	multu	($rs2,$d3)		# d3*s2
-	 sltu	$at,$h1,$at
-	 addu	$h2,$h2,$at
-
-	mflo	($at,$rs2,$d3)
-	mfhi	($t0,$rs2,$d3)
-	 addu	$h1,$h1,$a3
-	 addu	$h2,$h2,$t1
-	multu	($rs1,$h4)		# h4*s1
-	 sltu	$a3,$h1,$a3
-	 addu	$h2,$h2,$a3
-
-	mflo	($a3,$rs1,$h4)
-	 addu	$h1,$h1,$at
-	 addu	$h2,$h2,$t0
-	multu	($r2,$d0)		# d0*r2
-	 sltu	$at,$h1,$at
-	 addu	$h2,$h2,$at
-
-
-	mflo	($at,$r2,$d0)
-	mfhi	($h3,$r2,$d0)
-	 addu	$h1,$h1,$a3
-	 sltu	$a3,$h1,$a3
-	multu	($r1,$d1)		# d1*r1
-	 addu	$h2,$h2,$a3
-
-	mflo	($a3,$r1,$d1)
-	mfhi	($t1,$r1,$d1)
-	 addu	$h2,$h2,$at
-	 sltu	$at,$h2,$at
-	multu	($r0,$d2)		# d2*r0
-	 addu	$h3,$h3,$at
-
-	mflo	($at,$r0,$d2)
-	mfhi	($t0,$r0,$d2)
-	 addu	$h2,$h2,$a3
-	 addu	$h3,$h3,$t1
-	multu	($rs3,$d3)		# d3*s3
-	 sltu	$a3,$h2,$a3
-	 addu	$h3,$h3,$a3
-
-	mflo	($a3,$rs3,$d3)
-	mfhi	($t1,$rs3,$d3)
-	 addu	$h2,$h2,$at
-	 addu	$h3,$h3,$t0
-	multu	($rs2,$h4)		# h4*s2
-	 sltu	$at,$h2,$at
-	 addu	$h3,$h3,$at
-
-	mflo	($at,$rs2,$h4)
-	 addu	$h2,$h2,$a3
-	 addu	$h3,$h3,$t1
-	multu	($r3,$d0)		# d0*r3
-	 sltu	$a3,$h2,$a3
-	 addu	$h3,$h3,$a3
-
-
-	mflo	($a3,$r3,$d0)
-	mfhi	($t1,$r3,$d0)
-	 addu	$h2,$h2,$at
-	 sltu	$at,$h2,$at
-	multu	($r2,$d1)		# d1*r2
-	 addu	$h3,$h3,$at
-
-	mflo	($at,$r2,$d1)
-	mfhi	($t0,$r2,$d1)
-	 addu	$h3,$h3,$a3
-	 sltu	$a3,$h3,$a3
-	multu	($r0,$d3)		# d3*r0
-	 addu	$t1,$t1,$a3
-
-	mflo	($a3,$r0,$d3)
-	mfhi	($d3,$r0,$d3)
-	 addu	$h3,$h3,$at
-	 addu	$t1,$t1,$t0
-	multu	($r1,$d2)		# d2*r1
-	 sltu	$at,$h3,$at
-	 addu	$t1,$t1,$at
-
-	mflo	($at,$r1,$d2)
-	mfhi	($t0,$r1,$d2)
-	 addu	$h3,$h3,$a3
-	 addu	$t1,$t1,$d3
-	multu	($rs3,$h4)		# h4*s3
-	 sltu	$a3,$h3,$a3
-	 addu	$t1,$t1,$a3
-
-	mflo	($a3,$rs3,$h4)
-	 addu	$h3,$h3,$at
-	 addu	$t1,$t1,$t0
-	multu	($r0,$h4)		# h4*r0
-	 sltu	$at,$h3,$at
-	 addu	$t1,$t1,$at
-
-
-	mflo	($h4,$r0,$h4)
-	 addu	$h3,$h3,$a3
-	 sltu	$a3,$h3,$a3
-	 addu	$t1,$t1,$a3
-	addu	$h4,$h4,$t1
-
-	li	$padbit,1		# if we loop, padbit is 1
-#endif
-	bne	$inp,$len,.Loop
-
-	sw	$h0,0($ctx)		# store hash value
-	sw	$h1,4($ctx)
-	sw	$h2,8($ctx)
-	sw	$h3,12($ctx)
-	sw	$h4,16($ctx)
-
-	.set	noreorder
-.Labort:
-	lw	$s11,4*11($sp)
-	lw	$s10,4*10($sp)
-	lw	$s9, 4*9($sp)
-	lw	$s8, 4*8($sp)
-	lw	$s7, 4*7($sp)
-	lw	$s6, 4*6($sp)
-	lw	$s5, 4*5($sp)
-	lw	$s4, 4*4($sp)
-___
-$code.=<<___ if ($flavour =~ /nubi/i);	# optimize non-nubi prologue
-	lw	$s3, 4*3($sp)
-	lw	$s2, 4*2($sp)
-	lw	$s1, 4*1($sp)
-	lw	$s0, 4*0($sp)
-___
-$code.=<<___;
-	jr	$ra
-	addu	$sp,$sp,4*12
-.end	poly1305_blocks
-___
-}
-{
-my ($ctx,$mac,$nonce,$tmp4) = ($a0,$a1,$a2,$a3);
-
-$code.=<<___;
-.align	5
-.globl	poly1305_emit
-.ent	poly1305_emit
-poly1305_emit:
-	.frame	$sp,0,$ra
-	.set	reorder
-
-	lw	$tmp4,16($ctx)
-	lw	$tmp0,0($ctx)
-	lw	$tmp1,4($ctx)
-	lw	$tmp2,8($ctx)
-	lw	$tmp3,12($ctx)
-
-	li	$in0,-4			# final reduction
-	srl	$ctx,$tmp4,2
-	and	$in0,$in0,$tmp4
-	andi	$tmp4,$tmp4,3
-	addu	$ctx,$ctx,$in0
-
-	addu	$tmp0,$tmp0,$ctx
-	sltu	$ctx,$tmp0,$ctx
-	 addiu	$in0,$tmp0,5		# compare to modulus
-	addu	$tmp1,$tmp1,$ctx
-	 sltiu	$in1,$in0,5
-	sltu	$ctx,$tmp1,$ctx
-	 addu	$in1,$in1,$tmp1
-	addu	$tmp2,$tmp2,$ctx
-	 sltu	$in2,$in1,$tmp1
-	sltu	$ctx,$tmp2,$ctx
-	 addu	$in2,$in2,$tmp2
-	addu	$tmp3,$tmp3,$ctx
-	 sltu	$in3,$in2,$tmp2
-	sltu	$ctx,$tmp3,$ctx
-	 addu	$in3,$in3,$tmp3
-	addu	$tmp4,$tmp4,$ctx
-	 sltu	$ctx,$in3,$tmp3
-	 addu	$ctx,$tmp4
-
-	srl	$ctx,2			# see if it carried/borrowed
-	subu	$ctx,$zero,$ctx
-
-	xor	$in0,$tmp0
-	xor	$in1,$tmp1
-	xor	$in2,$tmp2
-	xor	$in3,$tmp3
-	and	$in0,$ctx
-	and	$in1,$ctx
-	and	$in2,$ctx
-	and	$in3,$ctx
-	xor	$in0,$tmp0
-	xor	$in1,$tmp1
-	xor	$in2,$tmp2
-	xor	$in3,$tmp3
-
-	lw	$tmp0,0($nonce)		# load nonce
-	lw	$tmp1,4($nonce)
-	lw	$tmp2,8($nonce)
-	lw	$tmp3,12($nonce)
-
-	addu	$in0,$tmp0		# accumulate nonce
-	sltu	$ctx,$in0,$tmp0
-
-	addu	$in1,$tmp1
-	sltu	$tmp1,$in1,$tmp1
-	addu	$in1,$ctx
-	sltu	$ctx,$in1,$ctx
-	addu	$ctx,$tmp1
-
-	addu	$in2,$tmp2
-	sltu	$tmp2,$in2,$tmp2
-	addu	$in2,$ctx
-	sltu	$ctx,$in2,$ctx
-	addu	$ctx,$tmp2
-
-	addu	$in3,$tmp3
-	addu	$in3,$ctx
-
-	srl	$tmp0,$in0,8		# write mac value
-	srl	$tmp1,$in0,16
-	srl	$tmp2,$in0,24
-	sb	$in0, 0($mac)
-	sb	$tmp0,1($mac)
-	srl	$tmp0,$in1,8
-	sb	$tmp1,2($mac)
-	srl	$tmp1,$in1,16
-	sb	$tmp2,3($mac)
-	srl	$tmp2,$in1,24
-	sb	$in1, 4($mac)
-	sb	$tmp0,5($mac)
-	srl	$tmp0,$in2,8
-	sb	$tmp1,6($mac)
-	srl	$tmp1,$in2,16
-	sb	$tmp2,7($mac)
-	srl	$tmp2,$in2,24
-	sb	$in2, 8($mac)
-	sb	$tmp0,9($mac)
-	srl	$tmp0,$in3,8
-	sb	$tmp1,10($mac)
-	srl	$tmp1,$in3,16
-	sb	$tmp2,11($mac)
-	srl	$tmp2,$in3,24
-	sb	$in3, 12($mac)
-	sb	$tmp0,13($mac)
-	sb	$tmp1,14($mac)
-	sb	$tmp2,15($mac)
-
-	jr	$ra
-.end	poly1305_emit
-.rdata
-.asciiz	"Poly1305 for MIPS32, CRYPTOGAMS by \@dot-asm"
-.align	2
-___
-}
-}}}
-
-$output=pop and open STDOUT,">$output";
-print $code;
-close STDOUT;
diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c
index cb12eb211a49..8d74d7d6c05b 100644
--- a/arch/mips/dec/prom/init.c
+++ b/arch/mips/dec/prom/init.c
@@ -42,7 +42,7 @@ int (*__pmax_close)(int);
  * Detect which PROM the DECSTATION has, and set the callback vectors
  * appropriately.
  */
-void __init which_prom(s32 magic, s32 *prom_vec)
+static void __init which_prom(s32 magic, s32 *prom_vec)
 {
 	/*
 	 * No sign of the REX PROM's magic number means we assume a non-REX
diff --git a/arch/mips/econet/Kconfig b/arch/mips/econet/Kconfig
new file mode 100644
index 000000000000..fd69884cc9a8
--- /dev/null
+++ b/arch/mips/econet/Kconfig
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+if ECONET
+
+choice
+	prompt "EcoNet SoC selection"
+	default SOC_ECONET_EN751221
+	help
+	  Select EcoNet MIPS SoC type. Individual SoCs within a family are
+	  very similar, so is it enough to select the right family, and
+	  then customize to the specific SoC using the device tree only.
+
+	config SOC_ECONET_EN751221
+		bool "EN751221 family"
+		select COMMON_CLK
+		select ECONET_EN751221_INTC
+		select IRQ_MIPS_CPU
+		select SMP
+		select SMP_UP
+		select SYS_SUPPORTS_SMP
+		help
+		  The EN751221 family includes EN7512, RN7513, EN7521, EN7526.
+		  They are based on single core MIPS 34Kc processors. To boot
+		  this kernel, you will need a device tree such as
+		  MIPS_RAW_APPENDED_DTB=y, and a root filesystem.
+endchoice
+
+choice
+	prompt "Devicetree selection"
+	default DTB_ECONET_NONE
+	help
+	  Select the devicetree.
+
+	config DTB_ECONET_NONE
+		bool "None"
+
+	config DTB_ECONET_SMARTFIBER_XP8421_B
+		bool "EN751221 SmartFiber XP8421-B"
+		depends on SOC_ECONET_EN751221
+		select BUILTIN_DTB
+		help
+		  The SmartFiber XP8421-B is a device based on the EN751221 SoC.
+		  It has 512MB of memory and 256MB of NAND flash. This kernel
+		  needs only an appended initramfs to boot. It can be loaded
+		  through XMODEM and booted from memory in the bootloader, or
+		  it can be packed in tclinux.trx format and written to flash.
+endchoice
+
+endif
diff --git a/arch/mips/econet/Makefile b/arch/mips/econet/Makefile
new file mode 100644
index 000000000000..7e4529e7d3d7
--- /dev/null
+++ b/arch/mips/econet/Makefile
@@ -0,0 +1,2 @@
+
+obj-y := init.o
diff --git a/arch/mips/econet/Platform b/arch/mips/econet/Platform
new file mode 100644
index 000000000000..ea5616447bcd
--- /dev/null
+++ b/arch/mips/econet/Platform
@@ -0,0 +1,5 @@
+# To address a 7.2MB kernel size limit in the EcoNet SDK bootloader,
+# we put the load address well above where the bootloader loads and then use
+# zboot. So please set CONFIG_ZBOOT_LOAD_ADDRESS to the address where your
+# bootloader actually places the kernel.
+load-$(CONFIG_ECONET)	+= 0xffffffff81000000
diff --git a/arch/mips/econet/init.c b/arch/mips/econet/init.c
new file mode 100644
index 000000000000..6f43ffb209cb
--- /dev/null
+++ b/arch/mips/econet/init.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * EcoNet setup code
+ *
+ * Copyright (C) 2025 Caleb James DeLisle <cjd@cjdns.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/of_clk.h>
+#include <linux/irqchip.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/reboot.h>
+
+#define CR_AHB_RSTCR		((void __iomem *)CKSEG1ADDR(0x1fb00040))
+#define RESET			BIT(31)
+
+#define UART_BASE		CKSEG1ADDR(0x1fbf0003)
+#define UART_REG_SHIFT		2
+
+static void hw_reset(char *command)
+{
+	iowrite32(RESET, CR_AHB_RSTCR);
+}
+
+/* 1. Bring up early printk. */
+void __init prom_init(void)
+{
+	setup_8250_early_printk_port(UART_BASE, UART_REG_SHIFT, 0);
+	_machine_restart = hw_reset;
+}
+
+/* 2. Parse the DT and find memory */
+void __init plat_mem_setup(void)
+{
+	void *dtb;
+
+	set_io_port_base(KSEG1);
+
+	dtb = get_fdt();
+	if (!dtb)
+		panic("no dtb found");
+
+	__dt_setup_arch(dtb);
+
+	early_init_dt_scan_memory();
+}
+
+/* 3. Overload __weak device_tree_init(), add SMP_UP ops */
+void __init device_tree_init(void)
+{
+	unflatten_and_copy_device_tree();
+
+	register_up_smp_ops();
+}
+
+const char *get_system_type(void)
+{
+	return "EcoNet-EN75xx";
+}
+
+/* 4. Initialize the IRQ subsystem */
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}
+
+/* 5. Timers */
+void __init plat_time_init(void)
+{
+	of_clk_init(NULL);
+	timer_probe();
+}
diff --git a/arch/mips/fw/arc/cmdline.c b/arch/mips/fw/arc/cmdline.c
index 155c5e911723..86b0e377b713 100644
--- a/arch/mips/fw/arc/cmdline.c
+++ b/arch/mips/fw/arc/cmdline.c
@@ -42,12 +42,13 @@ static char __init *move_firmware_args(int argc, LONG *argv, char *cp)
 {
 	char *s;
 	int actr, i;
+	size_t len;
 
 	actr = 1; /* Always ignore argv[0] */
 
 	while (actr < argc) {
-		for(i = 0; i < ARRAY_SIZE(used_arc); i++) {
-			int len = strlen(used_arc[i][0]);
+		for (i = 0; i < ARRAY_SIZE(used_arc); i++) {
+			len = strlen(used_arc[i][0]);
 
 			if (!strncmp(prom_argv(actr), used_arc[i][0], len)) {
 			/* Ok, we want it. First append the replacement... */
@@ -57,8 +58,9 @@ static char __init *move_firmware_args(int argc, LONG *argv, char *cp)
 				s = strchr(prom_argv(actr), '=');
 				if (s) {
 					s++;
-					strcpy(cp, s);
-					cp += strlen(s);
+					len = strlen(s);
+					memcpy(cp, s, len + 1);
+					cp += len;
 				}
 				*cp++ = ' ';
 				break;
@@ -74,6 +76,7 @@ void __init prom_init_cmdline(int argc, LONG *argv)
 {
 	char *cp;
 	int actr, i;
+	size_t len;
 
 	actr = 1; /* Always ignore argv[0] */
 
@@ -86,14 +89,15 @@ void __init prom_init_cmdline(int argc, LONG *argv)
 
 	while (actr < argc) {
 		for (i = 0; i < ARRAY_SIZE(ignored); i++) {
-			int len = strlen(ignored[i]);
-
+			len = strlen(ignored[i]);
 			if (!strncmp(prom_argv(actr), ignored[i], len))
 				goto pic_cont;
 		}
+
 		/* Ok, we want it. */
-		strcpy(cp, prom_argv(actr));
-		cp += strlen(prom_argv(actr));
+		len = strlen(prom_argv(actr));
+		memcpy(cp, prom_argv(actr), len + 1);
+		cp += len;
 		*cp++ = ' ';
 
 	pic_cont:
@@ -105,6 +109,6 @@ void __init prom_init_cmdline(int argc, LONG *argv)
 	*cp = '\0';
 
 #ifdef DEBUG_CMDLINE
-	printk(KERN_DEBUG "prom cmdline: %s\n", arcs_cmdline);
+	pr_debug("prom cmdline: %s\n", arcs_cmdline);
 #endif
 }
diff --git a/arch/mips/generic/board-ocelot.c b/arch/mips/generic/board-ocelot.c
index 7115410acb4f..59a0fb243582 100644
--- a/arch/mips/generic/board-ocelot.c
+++ b/arch/mips/generic/board-ocelot.c
@@ -4,6 +4,7 @@
  *
  * Copyright (c) 2017 Microsemi Corporation
  */
+#include <linux/string.h>
 #include <asm/machine.h>
 #include <asm/prom.h>
 
@@ -41,7 +42,7 @@ static __init bool ocelot_detect(void)
 
 		if (prom_argc > 1 && strlen(prom_argv[1]) > 0)
 			/* ignore all built-in args if any f/w args given */
-			strcpy(arcs_cmdline, prom_argv[1]);
+			strscpy(arcs_cmdline, prom_argv[1]);
 	}
 
 	return true;
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index 7e9ef01cb182..e2354e9b0ee2 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -15,7 +15,7 @@
 /*
  *  Configure language
  */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define _ATYPE_
 #define _ATYPE32_
 #define _ATYPE64_
@@ -34,7 +34,7 @@
 /*
  *  32-bit MIPS address spaces
  */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define _ACAST32_
 #define _ACAST64_
 #else
diff --git a/arch/mips/include/asm/asm-eva.h b/arch/mips/include/asm/asm-eva.h
index e327ebc76753..220431d00ee9 100644
--- a/arch/mips/include/asm/asm-eva.h
+++ b/arch/mips/include/asm/asm-eva.h
@@ -10,7 +10,7 @@
 #ifndef __ASM_ASM_EVA_H
 #define __ASM_ASM_EVA_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* Kernel variants */
 
@@ -99,7 +99,7 @@
 
 #endif /* CONFIG_EVA */
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 #define kernel_cache(op, base)		cache op, base
 #define kernel_pref(hint, base)		pref hint, base
@@ -185,6 +185,6 @@
 
 #endif /* CONFIG_EVA */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_ASM_EVA_H */
diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
index 87ff609b53fe..0ed19ffed076 100644
--- a/arch/mips/include/asm/asm.h
+++ b/arch/mips/include/asm/asm.h
@@ -37,7 +37,7 @@
 #define CFI_SECTIONS
 #endif
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 /*
  * LEAF - declare leaf routine
  */
@@ -123,7 +123,7 @@ symbol		=	value
 #define ASM_PRINT(string)
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * Stack alignment
@@ -228,7 +228,7 @@ symbol		=	value
 #define LONG_INS	ins
 #define LONG_EXT	ext
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define LONG		.word
 #endif
 #define LONGSIZE	4
@@ -257,7 +257,7 @@ symbol		=	value
 #define LONG_INS	dins
 #define LONG_EXT	dext
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define LONG		.dword
 #endif
 #define LONGSIZE	8
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 89f73d1a4ea4..42f88452c920 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -327,7 +327,7 @@ static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *
  * Return the bit position (0..63) of the most significant 1 bit in a word
  * Returns -1 if no 1 bit exists
  */
-static __always_inline unsigned long __fls(unsigned long word)
+static __always_inline __attribute_const__ unsigned long __fls(unsigned long word)
 {
 	int num;
 
@@ -393,7 +393,7 @@ static __always_inline unsigned long __fls(unsigned long word)
  * Returns 0..SZLONG-1
  * Undefined if no bit exists, so code should check against 0 first.
  */
-static __always_inline unsigned long __ffs(unsigned long word)
+static __always_inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 	return __fls(word & -word);
 }
@@ -405,7 +405,7 @@ static __always_inline unsigned long __ffs(unsigned long word)
  * This is defined the same way as ffs.
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	int r;
 
@@ -458,7 +458,7 @@ static inline int fls(unsigned int x)
  * the libc and compiler builtin ffs routines, therefore
  * differs in spirit from the below ffz (man ffs).
  */
-static inline int ffs(int word)
+static inline __attribute_const__ int ffs(int word)
 {
 	if (!word)
 		return 0;
diff --git a/arch/mips/include/asm/bmips.h b/arch/mips/include/asm/bmips.h
index 3a1cdfddb987..0eee81be9e2b 100644
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -42,7 +42,7 @@
 
 #define ZSCM_REG_BASE			0x97000000
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 
 #include <linux/cpumask.h>
 #include <asm/r4kcache.h>
@@ -124,6 +124,6 @@ static inline void bmips_write_zscm_reg(unsigned int offset, unsigned long data)
 	barrier();
 }
 
-#endif /* !defined(__ASSEMBLY__) */
+#endif /* !defined(__ASSEMBLER__) */
 
 #endif /* _ASM_BMIPS_H */
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index 1f14132b3fc9..5099c1b65a58 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -37,11 +37,11 @@
 #define PG_dcache_dirty			PG_arch_1
 
 #define folio_test_dcache_dirty(folio)		\
-	test_bit(PG_dcache_dirty, &(folio)->flags)
+	test_bit(PG_dcache_dirty, &(folio)->flags.f)
 #define folio_set_dcache_dirty(folio)	\
-	set_bit(PG_dcache_dirty, &(folio)->flags)
+	set_bit(PG_dcache_dirty, &(folio)->flags.f)
 #define folio_clear_dcache_dirty(folio)	\
-	clear_bit(PG_dcache_dirty, &(folio)->flags)
+	clear_bit(PG_dcache_dirty, &(folio)->flags.f)
 
 extern void (*flush_cache_all)(void);
 extern void (*__flush_cache_all)(void);
@@ -50,13 +50,14 @@ extern void (*flush_cache_mm)(struct mm_struct *mm);
 extern void (*flush_cache_range)(struct vm_area_struct *vma,
 	unsigned long start, unsigned long end);
 extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
-extern void __flush_dcache_pages(struct page *page, unsigned int nr);
+void __flush_dcache_folio_pages(struct folio *folio, struct page *page, unsigned int nr);
 
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 static inline void flush_dcache_folio(struct folio *folio)
 {
 	if (cpu_has_dc_aliases)
-		__flush_dcache_pages(&folio->page, folio_nr_pages(folio));
+		__flush_dcache_folio_pages(folio, folio_page(folio, 0),
+					   folio_nr_pages(folio));
 	else if (!cpu_has_ic_fills_f_dc)
 		folio_set_dcache_dirty(folio);
 }
@@ -64,10 +65,12 @@ static inline void flush_dcache_folio(struct folio *folio)
 
 static inline void flush_dcache_page(struct page *page)
 {
+	struct folio *folio = page_folio(page);
+
 	if (cpu_has_dc_aliases)
-		__flush_dcache_pages(page, 1);
+		__flush_dcache_folio_pages(folio, page, 1);
 	else if (!cpu_has_ic_fills_f_dc)
-		folio_set_dcache_dirty(page_folio(page));
+		folio_set_dcache_dirty(folio);
 }
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index a600670d00e9..fd60837ce50b 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -123,6 +123,7 @@ extern struct cpuinfo_mips cpu_data[];
 
 extern void cpu_probe(void);
 extern void cpu_report(void);
+extern void cpu_disable_mmid(void);
 
 extern const char *__cpu_name[];
 #define cpu_name_string()	__cpu_name[raw_smp_processor_id()]
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index a4a66bd93748..fd37a44a2f19 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -24,8 +24,7 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_LOONGSON64:
 #endif
 
-#if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \
-    defined(CONFIG_SYS_HAS_CPU_LOONGSON1C)
+#ifdef CONFIG_SYS_HAS_CPU_LOONGSON32
 	case CPU_LOONGSON32:
 #endif
 
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index ecb9854cb432..0fd9f9bbd21f 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -248,8 +248,7 @@
 #define PRID_REV_VR4181A		0x0070	/* Same as VR4122 */
 #define PRID_REV_VR4130			0x0080
 #define PRID_REV_34K_V1_0_2		0x0022
-#define PRID_REV_LOONGSON1B		0x0020
-#define PRID_REV_LOONGSON1C		0x0020	/* Same as Loongson-1B */
+#define PRID_REV_LOONGSON1		0x0020
 #define PRID_REV_LOONGSON2E		0x0002
 #define PRID_REV_LOONGSON2F		0x0003
 #define PRID_REV_LOONGSON2K_R1_0	0x0000
@@ -288,7 +287,7 @@
 
 #define FPIR_IMP_NONE		0x0000
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 
 enum cpu_type_enum {
 	CPU_UNKNOWN,
@@ -329,7 +328,7 @@ enum cpu_type_enum {
 	CPU_LAST
 };
 
-#endif /* !__ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * ISA Level encodings
diff --git a/arch/mips/include/asm/dec/ecc.h b/arch/mips/include/asm/dec/ecc.h
index c3a3f71f1a54..dbc39643c31c 100644
--- a/arch/mips/include/asm/dec/ecc.h
+++ b/arch/mips/include/asm/dec/ecc.h
@@ -37,7 +37,7 @@
 #define KN0X_ESR_SYNLO		(0x7f<<0)	/* syndrome from ECC logic */
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/interrupt.h>
 
diff --git a/arch/mips/include/asm/dec/interrupts.h b/arch/mips/include/asm/dec/interrupts.h
index e10d341067c8..c1cd36c04b6c 100644
--- a/arch/mips/include/asm/dec/interrupts.h
+++ b/arch/mips/include/asm/dec/interrupts.h
@@ -95,7 +95,7 @@
 #define DEC_CPU_IRQ_ALL		(0xff << CAUSEB_IP)
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * Interrupt table structures to hide differences between systems.
@@ -121,6 +121,6 @@ extern void cpu_all_int(void);
 extern void dec_intr_unimplemented(void);
 extern void asic_intr_unimplemented(void);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h
index 88d9ffd74258..6c074b93a7db 100644
--- a/arch/mips/include/asm/dec/kn01.h
+++ b/arch/mips/include/asm/dec/kn01.h
@@ -71,7 +71,7 @@
 #define KN01_CSR_LEDS		(0xff<<0) /* ~diagnostic LEDs (w/o) */
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
diff --git a/arch/mips/include/asm/dec/kn02.h b/arch/mips/include/asm/dec/kn02.h
index 93430b5f4724..9fea17020079 100644
--- a/arch/mips/include/asm/dec/kn02.h
+++ b/arch/mips/include/asm/dec/kn02.h
@@ -80,7 +80,7 @@
 #define KN02_IRQ_ALL		0xff
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 
diff --git a/arch/mips/include/asm/dec/kn02xa.h b/arch/mips/include/asm/dec/kn02xa.h
index b56b4577f6ef..3580d78b906f 100644
--- a/arch/mips/include/asm/dec/kn02xa.h
+++ b/arch/mips/include/asm/dec/kn02xa.h
@@ -70,7 +70,7 @@
 #define KN02XA_EAR_RES_0	(0x3<<0)	/* unused */
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/interrupt.h>
 
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
index 46cfb01f9a14..51cb61fd4c03 100644
--- a/arch/mips/include/asm/ds1287.h
+++ b/arch/mips/include/asm/ds1287.h
@@ -8,7 +8,7 @@
 #define __ASM_DS1287_H
 
 extern int ds1287_timer_state(void);
-extern void ds1287_set_base_clock(unsigned int clock);
+extern int ds1287_set_base_clock(unsigned int hz);
 extern int ds1287_clockevent_init(int irq);
 
 #endif
diff --git a/arch/mips/include/asm/eva.h b/arch/mips/include/asm/eva.h
index a3d1807f227c..c7b39f38634b 100644
--- a/arch/mips/include/asm/eva.h
+++ b/arch/mips/include/asm/eva.h
@@ -13,7 +13,7 @@
 
 #include <kernel-entry-init.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef CONFIG_EVA
 
@@ -38,6 +38,6 @@ platform_eva_init
 
 #endif /* CONFIG_EVA */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h
index 021d09ae5670..44da2ff91f65 100644
--- a/arch/mips/include/asm/floppy.h
+++ b/arch/mips/include/asm/floppy.h
@@ -34,21 +34,6 @@ static inline void fd_cacheflush(char * addr, long size)
 #define N_FDC 1			/* do you *really* want a second controller? */
 #define N_DRIVE 8
 
-/*
- * The DMA channel used by the floppy controller cannot access data at
- * addresses >= 16MB
- *
- * Went back to the 1MB limit, as some people had problems with the floppy
- * driver otherwise. It doesn't matter much for performance anyway, as most
- * floppy accesses go through the track buffer.
- *
- * On MIPSes using vdma, this actually means that *all* transfers go thru
- * the * track buffer since 0x1000000 is always smaller than KSEG0/1.
- * Actually this needs to be a bit more complicated since the so much different
- * hardware available with MIPS CPUs ...
- */
-#define CROSS_64KB(a, s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)
-
 #define EXTRA_FLOPPY_PARAMS
 
 #include <floppy.h>
diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h
index dc025888f6d2..7d557f03188f 100644
--- a/arch/mips/include/asm/ftrace.h
+++ b/arch/mips/include/asm/ftrace.h
@@ -15,7 +15,7 @@
 #define MCOUNT_ADDR ((unsigned long)(_mcount))
 #define MCOUNT_INSN_SIZE 4		/* sizeof mcount call */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern void _mcount(void);
 #define mcount _mcount
 
@@ -89,6 +89,22 @@ struct dyn_arch_ftrace {
 void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 			   unsigned long fp);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* CONFIG_FUNCTION_TRACER */
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+#ifndef __ASSEMBLER__
+/*
+ * Some syscall entry functions on mips start with "__sys_" (fork and clone,
+ * for instance). We should also match the sys_ variant with those.
+ */
+#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+static inline bool arch_syscall_match_sym_name(const char *sym,
+					       const char *name)
+{
+	return !strcmp(sym, name) ||
+		(!strncmp(sym, "__sys_", 6) && !strcmp(sym + 6, name + 4));
+}
+#endif /* __ASSEMBLER__ */
+#endif /* CONFIG_FTRACE_SYSCALLS */
 #endif /* _ASM_MIPS_FTRACE_H */
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index cb16be93b048..a084b3b3bc81 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -301,7 +301,7 @@ do {									\
 
 #endif
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define _ssnop ___ssnop
 #define	_ehb ___ehb
@@ -417,6 +417,6 @@ do {									\
  */
 extern void mips_ihb(void);
 
-#endif /* __ASSEMBLY__  */
+#endif /* __ASSEMBLER__  */
 
 #endif /* _ASM_HAZARDS_H */
diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h
index d0a86ce83de9..8c460ce01ffe 100644
--- a/arch/mips/include/asm/hugetlb.h
+++ b/arch/mips/include/asm/hugetlb.h
@@ -11,23 +11,10 @@
 
 #include <asm/page.h>
 
-#define __HAVE_ARCH_PREPARE_HUGEPAGE_RANGE
-static inline int prepare_hugepage_range(struct file *file,
-					 unsigned long addr,
-					 unsigned long len)
-{
-	unsigned long task_size = STACK_TOP;
-
-	if (len > task_size)
-		return -ENOMEM;
-	if (task_size - len < addr)
-		return -EINVAL;
-	return 0;
-}
-
 #define __HAVE_ARCH_HUGE_PTEP_GET_AND_CLEAR
 static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-					    unsigned long addr, pte_t *ptep)
+					    unsigned long addr, pte_t *ptep,
+					    unsigned long sz)
 {
 	pte_t clear;
 	pte_t pte = *ptep;
@@ -42,13 +29,14 @@ static inline pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
 					  unsigned long addr, pte_t *ptep)
 {
 	pte_t pte;
+	unsigned long sz = huge_page_size(hstate_vma(vma));
 
 	/*
 	 * clear the huge pte entry firstly, so that the other smp threads will
 	 * not get old pte entry after finishing flush_tlb_page and before
 	 * setting new huge pte entry
 	 */
-	pte = huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+	pte = huge_ptep_get_and_clear(vma->vm_mm, addr, ptep, sz);
 	flush_tlb_page(vma, addr);
 	return pte;
 }
diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h
index 0992cad9c632..c7d75807d13f 100644
--- a/arch/mips/include/asm/idle.h
+++ b/arch/mips/include/asm/idle.h
@@ -6,11 +6,10 @@
 #include <linux/linkage.h>
 
 extern void (*cpu_wait)(void);
-extern void r4k_wait(void);
-extern asmlinkage void __r4k_wait(void);
+extern asmlinkage void r4k_wait(void);
 extern void r4k_wait_irqoff(void);
 
-static inline int using_rollback_handler(void)
+static inline int using_skipover_handler(void)
 {
 	return cpu_wait == r4k_wait;
 }
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 0bddb568af7c..980187a83053 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -67,17 +67,6 @@ static inline void set_io_port_base(unsigned long base)
 }
 
 /*
- * Provide the necessary definitions for generic iomap. We make use of
- * mips_io_port_base for iomap(), but we don't reserve any low addresses for
- * use with I/O ports.
- */
-
-#define HAVE_ARCH_PIO_SIZE
-#define PIO_OFFSET	mips_io_port_base
-#define PIO_MASK	IO_SPACE_LIMIT
-#define PIO_RESERVED	0x0UL
-
-/*
  * Enforce in-order execution of data I/O.  In the MIPS architecture
  * these are equivalent to corresponding platform-specific memory
  * barriers defined in <asm/barrier.h>.  API pinched from PowerPC,
@@ -126,7 +115,7 @@ static inline unsigned long isa_virt_to_bus(volatile void *address)
 }
 
 void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
-		unsigned long prot_val);
+			   pgprot_t prot);
 void iounmap(const volatile void __iomem *addr);
 
 /*
@@ -141,7 +130,7 @@ void iounmap(const volatile void __iomem *addr);
  * address.
  */
 #define ioremap(offset, size)						\
-	ioremap_prot((offset), (size), _CACHE_UNCACHED)
+	ioremap_prot((offset), (size), __pgprot(_CACHE_UNCACHED))
 
 /*
  * ioremap_cache -	map bus memory into CPU space
@@ -159,7 +148,7 @@ void iounmap(const volatile void __iomem *addr);
  * memory-like regions on I/O busses.
  */
 #define ioremap_cache(offset, size)					\
-	ioremap_prot((offset), (size), _page_cachable_default)
+	ioremap_prot((offset), (size), __pgprot(_page_cachable_default))
 
 /*
  * ioremap_wc     -   map bus memory into CPU space
@@ -180,7 +169,7 @@ void iounmap(const volatile void __iomem *addr);
  * _CACHE_UNCACHED option (see cpu_probe() method).
  */
 #define ioremap_wc(offset, size)					\
-	ioremap_prot((offset), (size), boot_cpu_data.writecombine)
+	ioremap_prot((offset), (size), __pgprot(boot_cpu_data.writecombine))
 
 #if defined(CONFIG_CPU_CAVIUM_OCTEON)
 #define war_io_reorder_wmb()		wmb()
@@ -397,8 +386,8 @@ static inline void writes##bwlq(volatile void __iomem *mem,		\
 	}								\
 }									\
 									\
-static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
-			       unsigned int count)			\
+static inline void reads##bwlq(const volatile void __iomem *mem,	\
+			       void *addr, unsigned int count)		\
 {									\
 	volatile type *__addr = addr;					\
 									\
@@ -555,6 +544,16 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 
 void __ioread64_copy(void *to, const void __iomem *from, size_t count);
 
+#if defined(CONFIG_PCI) && defined(CONFIG_PCI_DRIVERS_LEGACY)
+struct pci_dev;
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+#define pci_iounmap pci_iounmap
+#endif
+
+#ifndef PCI_IOBASE
+#define PCI_IOBASE ((void __iomem *)mips_io_port_base)
+#endif
+
 #include <asm-generic/io.h>
 
 static inline void *isa_bus_to_virt(unsigned long address)
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index f5b8300f4573..70e5b05fd88b 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -11,7 +11,7 @@
 #ifndef _ASM_IRQFLAGS_H
 #define _ASM_IRQFLAGS_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/compiler.h>
 #include <linux/stringify.h>
@@ -142,7 +142,7 @@ static inline int arch_irqs_disabled(void)
 	return arch_irqs_disabled_flags(arch_local_save_flags());
 }
 
-#endif /* #ifndef __ASSEMBLY__ */
+#endif /* #ifndef __ASSEMBLER__ */
 
 /*
  * Do the CPU's IRQ-state tracing from assembly code.
diff --git a/arch/mips/include/asm/jazz.h b/arch/mips/include/asm/jazz.h
index a61970d01a81..9356e87dd64b 100644
--- a/arch/mips/include/asm/jazz.h
+++ b/arch/mips/include/asm/jazz.h
@@ -70,7 +70,7 @@
 #define LED_E			0x9e
 #define LED_F			0x8e
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static __inline__ void pica_set_led(unsigned int bits)
 {
@@ -79,7 +79,7 @@ static __inline__ void pica_set_led(unsigned int bits)
 	*led_register = bits;
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Base address of the Sonic Ethernet adapter in Jazz machines.
@@ -100,7 +100,7 @@ static __inline__ void pica_set_led(unsigned int bits)
 #define JAZZ_KEYBOARD_DATA	0xe0005000
 #define JAZZ_KEYBOARD_COMMAND	0xe0005001
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef struct {
 	unsigned char data;
@@ -121,7 +121,7 @@ typedef struct {
  */
 #define keyboard_hardware	jazz_keyboard_hardware
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * i8042 keyboard controller for most other Mips machines.
@@ -154,7 +154,7 @@ typedef struct {
 /*
  * DRAM configuration register
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifdef __MIPSEL__
 typedef struct {
 	unsigned int bank2 : 3;
@@ -174,7 +174,7 @@ typedef struct {
 	unsigned int bank2 : 3;
 } dram_configuration;
 #endif
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #define PICA_DRAM_CONFIG	0xe00fffe0
 
@@ -260,7 +260,7 @@ typedef struct {
 /*
  * Access the R4030 DMA and I/O Controller
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline void r4030_delay(void)
 {
@@ -299,7 +299,7 @@ static inline void r4030_write_reg32(unsigned long addr, unsigned val)
 	r4030_delay();
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #define JAZZ_FDC_BASE	0xe0003000
 #define JAZZ_RTC_BASE	0xe0004000
diff --git a/arch/mips/include/asm/jump_label.h b/arch/mips/include/asm/jump_label.h
index ff5d388502d4..c1508f88e03e 100644
--- a/arch/mips/include/asm/jump_label.h
+++ b/arch/mips/include/asm/jump_label.h
@@ -10,7 +10,7 @@
 
 #define arch_jump_label_transform_static arch_jump_label_transform
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <asm/isa-rev.h>
@@ -76,5 +76,5 @@ struct jump_entry {
 	jump_label_t key;
 };
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif /* _ASM_MIPS_JUMP_LABEL_H */
diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h
index f7222eb594ea..c14b10821817 100644
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -886,7 +886,6 @@ extern unsigned long kvm_mips_get_ramsize(struct kvm *kvm);
 extern int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
 			     struct kvm_mips_interrupt *irq);
 
-static inline void kvm_arch_sync_events(struct kvm *kvm) {}
 static inline void kvm_arch_free_memslot(struct kvm *kvm,
 					 struct kvm_memory_slot *slot) {}
 static inline void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen) {}
diff --git a/arch/mips/include/asm/linkage.h b/arch/mips/include/asm/linkage.h
index 1829c2b6da6c..fd44ba754f1a 100644
--- a/arch/mips/include/asm/linkage.h
+++ b/arch/mips/include/asm/linkage.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_LINKAGE_H
 #define __ASM_LINKAGE_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #include <asm/asm.h>
 #endif
 
diff --git a/arch/mips/include/asm/mach-generic/mc146818rtc.h b/arch/mips/include/asm/mach-generic/mc146818rtc.h
index 9c72e540ff56..249279b0494d 100644
--- a/arch/mips/include/asm/mach-generic/mc146818rtc.h
+++ b/arch/mips/include/asm/mach-generic/mc146818rtc.h
@@ -29,8 +29,4 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
 
 #define RTC_ALWAYS_BCD	0
 
-#ifndef mc146818_decode_year
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
-#endif
-
 #endif /* __ASM_MACH_GENERIC_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
index f8783d339fb0..6332b6cbf7ee 100644
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -21,13 +21,13 @@
 /*
  * This gives the physical RAM offset.
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 # if defined(CONFIG_MIPS_AUTO_PFN_OFFSET)
 #  define PHYS_OFFSET		((unsigned long)PFN_PHYS(ARCH_PFN_OFFSET))
 # elif !defined(PHYS_OFFSET)
 #  define PHYS_OFFSET		_AC(0, UL)
 # endif
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #ifdef CONFIG_32BIT
 #define CAC_BASE		_AC(0x80000000, UL)
diff --git a/arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h
index ce4e4c6e09e2..50d487a4c95e 100644
--- a/arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h
@@ -5,7 +5,7 @@
  * Copyright (C) 2003 Ralf Baechle <ralf@linux-mips.org>
  *		 2004-2007 Stanislaw Skowronek <skylark@unaligned.org>
  *		 2009 Johannes Dickgreber <tanzy@gmx.de>
- *		 2015 Joshua Kinard <kumba@gentoo.org>
+ *		 2015 Joshua Kinard <linux@kumba.dev>
  *
  */
 #ifndef __ASM_MACH_IP30_CPU_FEATURE_OVERRIDES_H
diff --git a/arch/mips/include/asm/mach-ip30/spaces.h b/arch/mips/include/asm/mach-ip30/spaces.h
index c8a302dfbe05..d381b93d6ad3 100644
--- a/arch/mips/include/asm/mach-ip30/spaces.h
+++ b/arch/mips/include/asm/mach-ip30/spaces.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
- * Copyright (C) 2016 Joshua Kinard <kumba@gentoo.org>
+ * Copyright (C) 2016 Joshua Kinard <linux@kumba.dev>
  *
  */
 #ifndef _ASM_MACH_IP30_SPACES_H
diff --git a/arch/mips/include/asm/mach-jazz/mc146818rtc.h b/arch/mips/include/asm/mach-jazz/mc146818rtc.h
index 987f727afe25..639bff8ebca3 100644
--- a/arch/mips/include/asm/mach-jazz/mc146818rtc.h
+++ b/arch/mips/include/asm/mach-jazz/mc146818rtc.h
@@ -33,6 +33,4 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
 
 #define RTC_ALWAYS_BCD	0
 
-#define mc146818_decode_year(year) ((year) + 1980)
-
 #endif /* __ASM_MACH_JAZZ_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
index c2e0acb755cd..dd9f621d0204 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -99,5 +99,8 @@ extern __iomem void *ltq_cgu_membase;
 extern void ltq_pmu_enable(unsigned int module);
 extern void ltq_pmu_disable(unsigned int module);
 
+/* VMMC */
+extern unsigned int *ltq_get_cp1_base(void);
+
 #endif /* CONFIG_SOC_TYPE_XWAY */
 #endif /* _LTQ_XWAY_H__ */
diff --git a/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h
index a0d4b752899e..5dbc9b13d15b 100644
--- a/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h
+++ b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h
@@ -12,12 +12,32 @@
 #ifndef _CS5536_PCI_H
 #define _CS5536_PCI_H
 
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/pci_regs.h>
 
 extern void cs5536_pci_conf_write4(int function, int reg, u32 value);
 extern u32 cs5536_pci_conf_read4(int function, int reg);
 
+extern void pci_ehci_write_reg(int reg, u32 value);
+extern u32 pci_ehci_read_reg(int reg);
+
+extern void pci_ide_write_reg(int reg, u32 value);
+extern u32 pci_ide_read_reg(int reg);
+
+extern void pci_acc_write_reg(int reg, u32 value);
+extern u32 pci_acc_read_reg(int reg);
+
+extern void pci_ohci_write_reg(int reg, u32 value);
+extern u32 pci_ohci_read_reg(int reg);
+
+extern void pci_isa_write_bar(int n, u32 value);
+extern u32 pci_isa_read_bar(int n);
+extern void pci_isa_write_reg(int reg, u32 value);
+extern u32 pci_isa_read_reg(int reg);
+
+extern int __init init_mfgpt_clocksource(void);
+
 #define CS5536_ACC_INTR		9
 #define CS5536_IDE_INTR		14
 #define CS5536_USB_INTR		11
diff --git a/arch/mips/include/asm/mach-loongson2ef/loongson.h b/arch/mips/include/asm/mach-loongson2ef/loongson.h
index ca039b8dcde3..4a098fb10232 100644
--- a/arch/mips/include/asm/mach-loongson2ef/loongson.h
+++ b/arch/mips/include/asm/mach-loongson2ef/loongson.h
@@ -18,6 +18,9 @@ extern void bonito_irq_init(void);
 extern void mach_prepare_reboot(void);
 extern void mach_prepare_shutdown(void);
 
+/* machine-specific PROM functions */
+extern void __init mach_prom_init_machtype(void);
+
 /* environment arguments from bootloader */
 extern u32 cpu_clock_freq;
 extern u32 memsize, highmemsize;
@@ -45,6 +48,12 @@ extern void __init mach_init_irq(void);
 extern void mach_irq_dispatch(unsigned int pending);
 extern int mach_i8259_irq(void);
 
+/* power management functions */
+extern void setup_wakeup_events(void);
+extern int wakeup_loongson(void);
+extern void __weak mach_suspend(void);
+extern void __weak mach_resume(void);
+
 /* We need this in some places... */
 #define delay() ({		\
 	int x;				\
diff --git a/arch/mips/include/asm/mach-loongson32/irq.h b/arch/mips/include/asm/mach-loongson32/irq.h
deleted file mode 100644
index 6115f025ba21..000000000000
--- a/arch/mips/include/asm/mach-loongson32/irq.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * IRQ mappings for Loongson 1
- */
-
-#ifndef __ASM_MACH_LOONGSON32_IRQ_H
-#define __ASM_MACH_LOONGSON32_IRQ_H
-
-/*
- * CPU core Interrupt Numbers
- */
-#define MIPS_CPU_IRQ_BASE		0
-#define MIPS_CPU_IRQ(x)			(MIPS_CPU_IRQ_BASE + (x))
-
-#define SOFTINT0_IRQ			MIPS_CPU_IRQ(0)
-#define SOFTINT1_IRQ			MIPS_CPU_IRQ(1)
-#define INT0_IRQ			MIPS_CPU_IRQ(2)
-#define INT1_IRQ			MIPS_CPU_IRQ(3)
-#define INT2_IRQ			MIPS_CPU_IRQ(4)
-#define INT3_IRQ			MIPS_CPU_IRQ(5)
-#define INT4_IRQ			MIPS_CPU_IRQ(6)
-#define TIMER_IRQ			MIPS_CPU_IRQ(7)		/* cpu timer */
-
-#define MIPS_CPU_IRQS		(MIPS_CPU_IRQ(7) + 1 - MIPS_CPU_IRQ_BASE)
-
-/*
- * INT0~3 Interrupt Numbers
- */
-#define LS1X_IRQ_BASE			MIPS_CPU_IRQS
-#define LS1X_IRQ(n, x)			(LS1X_IRQ_BASE + (n << 5) + (x))
-
-#define LS1X_UART0_IRQ			LS1X_IRQ(0, 2)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_UART1_IRQ			LS1X_IRQ(0, 3)
-#define LS1X_UART2_IRQ			LS1X_IRQ(0, 4)
-#define LS1X_UART3_IRQ			LS1X_IRQ(0, 5)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_UART1_IRQ			LS1X_IRQ(0, 4)
-#define LS1X_UART2_IRQ			LS1X_IRQ(0, 5)
-#endif
-#define LS1X_CAN0_IRQ			LS1X_IRQ(0, 6)
-#define LS1X_CAN1_IRQ			LS1X_IRQ(0, 7)
-#define LS1X_SPI0_IRQ			LS1X_IRQ(0, 8)
-#define LS1X_SPI1_IRQ			LS1X_IRQ(0, 9)
-#define LS1X_AC97_IRQ			LS1X_IRQ(0, 10)
-#define LS1X_DMA0_IRQ			LS1X_IRQ(0, 13)
-#define LS1X_DMA1_IRQ			LS1X_IRQ(0, 14)
-#define LS1X_DMA2_IRQ			LS1X_IRQ(0, 15)
-#if defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_NAND_IRQ			LS1X_IRQ(0, 16)
-#endif
-#define LS1X_PWM0_IRQ			LS1X_IRQ(0, 17)
-#define LS1X_PWM1_IRQ			LS1X_IRQ(0, 18)
-#define LS1X_PWM2_IRQ			LS1X_IRQ(0, 19)
-#define LS1X_PWM3_IRQ			LS1X_IRQ(0, 20)
-#define LS1X_RTC_INT0_IRQ		LS1X_IRQ(0, 21)
-#define LS1X_RTC_INT1_IRQ		LS1X_IRQ(0, 22)
-#define LS1X_RTC_INT2_IRQ		LS1X_IRQ(0, 23)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_TOY_INT0_IRQ		LS1X_IRQ(0, 24)
-#define LS1X_TOY_INT1_IRQ		LS1X_IRQ(0, 25)
-#define LS1X_TOY_INT2_IRQ		LS1X_IRQ(0, 26)
-#define LS1X_RTC_TICK_IRQ		LS1X_IRQ(0, 27)
-#define LS1X_TOY_TICK_IRQ		LS1X_IRQ(0, 28)
-#define LS1X_UART4_IRQ			LS1X_IRQ(0, 29)
-#define LS1X_UART5_IRQ			LS1X_IRQ(0, 30)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_UART3_IRQ			LS1X_IRQ(0, 29)
-#define LS1X_ADC_IRQ			LS1X_IRQ(0, 30)
-#define LS1X_SDIO_IRQ			LS1X_IRQ(0, 31)
-#endif
-
-#define LS1X_EHCI_IRQ			LS1X_IRQ(1, 0)
-#define LS1X_OHCI_IRQ			LS1X_IRQ(1, 1)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_GMAC0_IRQ			LS1X_IRQ(1, 2)
-#define LS1X_GMAC1_IRQ			LS1X_IRQ(1, 3)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_OTG_IRQ			LS1X_IRQ(1, 2)
-#define LS1X_GMAC0_IRQ			LS1X_IRQ(1, 3)
-#define LS1X_CAM_IRQ			LS1X_IRQ(1, 4)
-#define LS1X_UART4_IRQ			LS1X_IRQ(1, 5)
-#define LS1X_UART5_IRQ			LS1X_IRQ(1, 6)
-#define LS1X_UART6_IRQ			LS1X_IRQ(1, 7)
-#define LS1X_UART7_IRQ			LS1X_IRQ(1, 8)
-#define LS1X_UART8_IRQ			LS1X_IRQ(1, 9)
-#define LS1X_UART9_IRQ			LS1X_IRQ(1, 13)
-#define LS1X_UART10_IRQ			LS1X_IRQ(1, 14)
-#define LS1X_UART11_IRQ			LS1X_IRQ(1, 15)
-#define LS1X_I2C0_IRQ			LS1X_IRQ(1, 17)
-#define LS1X_I2C1_IRQ			LS1X_IRQ(1, 18)
-#define LS1X_I2C2_IRQ			LS1X_IRQ(1, 19)
-#endif
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define INTN	4
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define INTN	5
-#endif
-
-#define LS1X_IRQS		(LS1X_IRQ(INTN, 31) + 1 - LS1X_IRQ_BASE)
-
-#define NR_IRQS			(MIPS_CPU_IRQS + LS1X_IRQS)
-
-#endif /* __ASM_MACH_LOONGSON32_IRQ_H */
diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
deleted file mode 100644
index 84f45461c832..000000000000
--- a/arch/mips/include/asm/mach-loongson32/loongson1.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Register mappings for Loongson 1
- */
-
-#ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
-#define __ASM_MACH_LOONGSON32_LOONGSON1_H
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define DEFAULT_MEMSIZE			64	/* If no memsize provided */
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define DEFAULT_MEMSIZE			32
-#endif
-
-/* Loongson 1 Register Bases */
-#define LS1X_MUX_BASE			0x1fd00420
-#define LS1X_INTC_BASE			0x1fd01040
-#define LS1X_GPIO0_BASE			0x1fd010c0
-#define LS1X_GPIO1_BASE			0x1fd010c4
-#define LS1X_DMAC_BASE			0x1fd01160
-#define LS1X_CBUS_BASE			0x1fd011c0
-#define LS1X_EHCI_BASE			0x1fe00000
-#define LS1X_OHCI_BASE			0x1fe08000
-#define LS1X_GMAC0_BASE			0x1fe10000
-#define LS1X_GMAC1_BASE			0x1fe20000
-
-#define LS1X_UART0_BASE			0x1fe40000
-#define LS1X_UART1_BASE			0x1fe44000
-#define LS1X_UART2_BASE			0x1fe48000
-#define LS1X_UART3_BASE			0x1fe4c000
-#define LS1X_CAN0_BASE			0x1fe50000
-#define LS1X_CAN1_BASE			0x1fe54000
-#define LS1X_I2C0_BASE			0x1fe58000
-#define LS1X_I2C1_BASE			0x1fe68000
-#define LS1X_I2C2_BASE			0x1fe70000
-#define LS1X_PWM0_BASE			0x1fe5c000
-#define LS1X_PWM1_BASE			0x1fe5c010
-#define LS1X_PWM2_BASE			0x1fe5c020
-#define LS1X_PWM3_BASE			0x1fe5c030
-#define LS1X_WDT_BASE			0x1fe5c060
-#define LS1X_RTC_BASE			0x1fe64000
-#define LS1X_AC97_BASE			0x1fe74000
-#define LS1X_NAND_BASE			0x1fe78000
-#define LS1X_CLK_BASE			0x1fe78030
-
-#include <regs-mux.h>
-
-#endif /* __ASM_MACH_LOONGSON32_LOONGSON1_H */
diff --git a/arch/mips/include/asm/mach-loongson32/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h
deleted file mode 100644
index f74292b13bc3..000000000000
--- a/arch/mips/include/asm/mach-loongson32/platform.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#ifndef __ASM_MACH_LOONGSON32_PLATFORM_H
-#define __ASM_MACH_LOONGSON32_PLATFORM_H
-
-#include <linux/platform_device.h>
-
-extern struct platform_device ls1x_uart_pdev;
-extern struct platform_device ls1x_eth0_pdev;
-extern struct platform_device ls1x_eth1_pdev;
-extern struct platform_device ls1x_ehci_pdev;
-extern struct platform_device ls1x_gpio0_pdev;
-extern struct platform_device ls1x_gpio1_pdev;
-extern struct platform_device ls1x_rtc_pdev;
-extern struct platform_device ls1x_wdt_pdev;
-
-void __init ls1x_rtc_set_extclk(struct platform_device *pdev);
-void __init ls1x_serial_set_uartclk(struct platform_device *pdev);
-
-#endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson32/regs-mux.h b/arch/mips/include/asm/mach-loongson32/regs-mux.h
deleted file mode 100644
index 95788a4f03a0..000000000000
--- a/arch/mips/include/asm/mach-loongson32/regs-mux.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 MUX Register Definitions.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_REGS_MUX_H
-#define __ASM_MACH_LOONGSON32_REGS_MUX_H
-
-#define LS1X_MUX_REG(x) \
-		((void __iomem *)KSEG1ADDR(LS1X_MUX_BASE + (x)))
-
-#define LS1X_MUX_CTRL0			LS1X_MUX_REG(0x0)
-#define LS1X_MUX_CTRL1			LS1X_MUX_REG(0x4)
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-/* MUX CTRL0 Register Bits */
-#define UART0_USE_PWM23			BIT(28)
-#define UART0_USE_PWM01			BIT(27)
-#define UART1_USE_LCD0_5_6_11		BIT(26)
-#define I2C2_USE_CAN1			BIT(25)
-#define I2C1_USE_CAN0			BIT(24)
-#define NAND3_USE_UART5			BIT(23)
-#define NAND3_USE_UART4			BIT(22)
-#define NAND3_USE_UART1_DAT		BIT(21)
-#define NAND3_USE_UART1_CTS		BIT(20)
-#define NAND3_USE_PWM23			BIT(19)
-#define NAND3_USE_PWM01			BIT(18)
-#define NAND2_USE_UART5			BIT(17)
-#define NAND2_USE_UART4			BIT(16)
-#define NAND2_USE_UART1_DAT		BIT(15)
-#define NAND2_USE_UART1_CTS		BIT(14)
-#define NAND2_USE_PWM23			BIT(13)
-#define NAND2_USE_PWM01			BIT(12)
-#define NAND1_USE_UART5			BIT(11)
-#define NAND1_USE_UART4			BIT(10)
-#define NAND1_USE_UART1_DAT		BIT(9)
-#define NAND1_USE_UART1_CTS		BIT(8)
-#define NAND1_USE_PWM23			BIT(7)
-#define NAND1_USE_PWM01			BIT(6)
-#define GMAC1_USE_UART1			BIT(4)
-#define GMAC1_USE_UART0			BIT(3)
-#define LCD_USE_UART0_DAT		BIT(2)
-#define LCD_USE_UART15			BIT(1)
-#define LCD_USE_UART0			BIT(0)
-
-/* MUX CTRL1 Register Bits */
-#define USB_RESET			BIT(31)
-#define SPI1_CS_USE_PWM01		BIT(24)
-#define SPI1_USE_CAN			BIT(23)
-#define DISABLE_DDR_CONFSPACE		BIT(20)
-#define DDR32TO16EN			BIT(16)
-#define GMAC1_SHUT			BIT(13)
-#define GMAC0_SHUT			BIT(12)
-#define USB_SHUT			BIT(11)
-#define UART1_3_USE_CAN1		BIT(5)
-#define UART1_2_USE_CAN0		BIT(4)
-#define GMAC1_USE_TXCLK			BIT(3)
-#define GMAC0_USE_TXCLK			BIT(2)
-#define GMAC1_USE_PWM23			BIT(1)
-#define GMAC0_USE_PWM01			BIT(0)
-
-#elif defined(CONFIG_LOONGSON1_LS1C)
-
-/* SHUT_CTRL Register Bits */
-#define UART_SPLIT			GENMASK(31, 30)
-#define OUTPUT_CLK			GENMASK(29, 26)
-#define ADC_SHUT			BIT(25)
-#define SDIO_SHUT			BIT(24)
-#define DMA2_SHUT			BIT(23)
-#define DMA1_SHUT			BIT(22)
-#define DMA0_SHUT			BIT(21)
-#define SPI1_SHUT			BIT(20)
-#define SPI0_SHUT			BIT(19)
-#define I2C2_SHUT			BIT(18)
-#define I2C1_SHUT			BIT(17)
-#define I2C0_SHUT			BIT(16)
-#define AC97_SHUT			BIT(15)
-#define I2S_SHUT			BIT(14)
-#define UART3_SHUT			BIT(13)
-#define UART2_SHUT			BIT(12)
-#define UART1_SHUT			BIT(11)
-#define UART0_SHUT			BIT(10)
-#define CAN1_SHUT			BIT(9)
-#define CAN0_SHUT			BIT(8)
-#define ECC_SHUT			BIT(7)
-#define GMAC_SHUT			BIT(6)
-#define USBHOST_SHUT			BIT(5)
-#define USBOTG_SHUT			BIT(4)
-#define SDRAM_SHUT			BIT(3)
-#define SRAM_SHUT			BIT(2)
-#define CAM_SHUT			BIT(1)
-#define LCD_SHUT			BIT(0)
-
-#define UART_SPLIT_SHIFT                        30
-#define OUTPUT_CLK_SHIFT                        26
-
-/* MISC_CTRL Register Bits */
-#define USBHOST_RSTN			BIT(31)
-#define PHY_INTF_SELI			GENMASK(30, 28)
-#define AC97_EN				BIT(25)
-#define SDIO_DMA_EN			GENMASK(24, 23)
-#define ADC_DMA_EN			BIT(22)
-#define SDIO_USE_SPI1			BIT(17)
-#define SDIO_USE_SPI0			BIT(16)
-#define SRAM_CTRL			GENMASK(15, 0)
-
-#define PHY_INTF_SELI_SHIFT                     28
-#define SDIO_DMA_EN_SHIFT                       23
-#define SRAM_CTRL_SHIFT				0
-
-#define LS1X_CBUS_REG(n, x) \
-		((void __iomem *)KSEG1ADDR(LS1X_CBUS_BASE + (n * 0x04) + (x)))
-
-#define LS1X_CBUS_FIRST(n)		LS1X_CBUS_REG(n, 0x00)
-#define LS1X_CBUS_SECOND(n)		LS1X_CBUS_REG(n, 0x10)
-#define LS1X_CBUS_THIRD(n)		LS1X_CBUS_REG(n, 0x20)
-#define LS1X_CBUS_FOURTHT(n)		LS1X_CBUS_REG(n, 0x30)
-#define LS1X_CBUS_FIFTHT(n)		LS1X_CBUS_REG(n, 0x40)
-
-#endif
-
-#endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */
diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
index 9218b3ae3383..3a11ce85762b 100644
--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -128,10 +128,10 @@ struct irq_source_routing_table {
 } __packed;
 
 struct interface_info {
-	u16 vers; /* version of the specificition */
-	u16 size;
-	u8  flag;
-	char description[64];
+	u16 vers; /* version of the specification */
+	u16 size; /* size of this interface */
+	u8  flag; /* used or unused */
+	char description[64]; /* description for each change */
 } __packed;
 
 #define MAX_RESOURCE_NUMBER 128
diff --git a/arch/mips/include/asm/mach-loongson64/spaces.h b/arch/mips/include/asm/mach-loongson64/spaces.h
index ce04e998a37b..dbd26db5f2c5 100644
--- a/arch/mips/include/asm/mach-loongson64/spaces.h
+++ b/arch/mips/include/asm/mach-loongson64/spaces.h
@@ -7,9 +7,10 @@
 #endif /* CONFIG_64BIT */
 
 /* Skip 128k to trap NULL pointer dereferences */
-#define PCI_IOBASE	_AC(0xc000000000000000 + SZ_128K, UL)
+#define PCI_PORT_BASE	_AC(0xc000000000000000 + SZ_128K, UL)
+#define PCI_IOBASE	(void __iomem *)PCI_PORT_BASE
 #define PCI_IOSIZE	SZ_16M
-#define MAP_BASE	(PCI_IOBASE + PCI_IOSIZE)
+#define MAP_BASE	(PCI_PORT_BASE + PCI_IOSIZE)
 
 #define IO_SPACE_LIMIT  (PCI_IOSIZE - 1)
 
diff --git a/arch/mips/include/asm/mach-malta/mc146818rtc.h b/arch/mips/include/asm/mach-malta/mc146818rtc.h
index e8cc7fdf7415..7da2c0ea55da 100644
--- a/arch/mips/include/asm/mach-malta/mc146818rtc.h
+++ b/arch/mips/include/asm/mach-malta/mc146818rtc.h
@@ -31,6 +31,4 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
 
 #define RTC_ALWAYS_BCD	0
 
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
-
 #endif /* __ASM_MACH_MALTA_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-ralink/spaces.h b/arch/mips/include/asm/mach-ralink/spaces.h
index a9f0570d0f04..a63d106c89c6 100644
--- a/arch/mips/include/asm/mach-ralink/spaces.h
+++ b/arch/mips/include/asm/mach-ralink/spaces.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_MACH_RALINK_SPACES_H_
 #define __ASM_MACH_RALINK_SPACES_H_
 
-#define PCI_IOBASE	mips_io_port_base
+#define PCI_IOBASE	(void __iomem *)mips_io_port_base
 #define PCI_IOSIZE	SZ_64K
 #define IO_SPACE_LIMIT	(PCI_IOSIZE - 1)
 
diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h
index 3eb767c8a4ee..e17ce82d02ba 100644
--- a/arch/mips/include/asm/mach-rc32434/pci.h
+++ b/arch/mips/include/asm/mach-rc32434/pci.h
@@ -167,7 +167,7 @@ struct pci_msu {
 #define PCI_CFGA_DEV		0x0000f800
 #define PCI_CFGA_DEV_INTERN	0
 #define PCI_CFGA_BUS_BIT	16
-#define PCI CFGA_BUS		0x00ff0000
+#define PCI_CFGA_BUS		0x00ff0000
 #define PCI_CFGA_BUS_TYPE0	0
 #define PCI_CFGA_EN		(1 << 31)
 
diff --git a/arch/mips/include/asm/mach-rm/mc146818rtc.h b/arch/mips/include/asm/mach-rm/mc146818rtc.h
deleted file mode 100644
index a074f4f84f75..000000000000
--- a/arch/mips/include/asm/mach-rm/mc146818rtc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 by Ralf Baechle
- *
- * RTC routines for PC style attached Dallas chip with ARC epoch.
- */
-#ifndef __ASM_MACH_RM_MC146818RTC_H
-#define __ASM_MACH_RM_MC146818RTC_H
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
-#else
-#define mc146818_decode_year(year) ((year) + 1980)
-#endif
-
-#include <asm/mach-generic/mc146818rtc.h>
-
-#endif /* __ASM_MACH_RM_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mc146818-time.h b/arch/mips/include/asm/mc146818-time.h
index cbf5cec345f1..ac52a30b4161 100644
--- a/arch/mips/include/asm/mc146818-time.h
+++ b/arch/mips/include/asm/mc146818-time.h
@@ -8,112 +8,21 @@
 #ifndef __ASM_MC146818_TIME_H
 #define __ASM_MC146818_TIME_H
 
-#include <linux/bcd.h>
 #include <linux/mc146818rtc.h>
 #include <linux/time.h>
 
-/*
- * For check timing call set_rtc_mmss() 500ms; used in timer interrupt.
- */
-#define USEC_AFTER	500000
-#define USEC_BEFORE	500000
-
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *	sets the minutes. Usually you'll only notice that after reboot!
- */
-static inline int mc146818_set_rtc_mmss(unsigned long nowtime)
-{
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned char save_control, save_freq_select;
-	int retval = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
-	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		cmos_minutes = bcd2bin(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;		/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			real_seconds = bin2bcd(real_seconds);
-			real_minutes = bin2bcd(real_minutes);
-		}
-		CMOS_WRITE(real_seconds, RTC_SECONDS);
-		CMOS_WRITE(real_minutes, RTC_MINUTES);
-	} else {
-		printk_once(KERN_NOTICE
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...			       -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return retval;
-}
-
+#ifdef CONFIG_RTC_MC146818_LIB
 static inline time64_t mc146818_get_cmos_time(void)
 {
-	unsigned int year, mon, day, hour, min, sec;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-
-	do {
-		sec = CMOS_READ(RTC_SECONDS);
-		min = CMOS_READ(RTC_MINUTES);
-		hour = CMOS_READ(RTC_HOURS);
-		day = CMOS_READ(RTC_DAY_OF_MONTH);
-		mon = CMOS_READ(RTC_MONTH);
-		year = CMOS_READ(RTC_YEAR);
-	} while (sec != CMOS_READ(RTC_SECONDS));
+	struct rtc_time tm;
 
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		sec = bcd2bin(sec);
-		min = bcd2bin(min);
-		hour = bcd2bin(hour);
-		day = bcd2bin(day);
-		mon = bcd2bin(mon);
-		year = bcd2bin(year);
+	if (mc146818_get_time(&tm, 1000)) {
+		pr_err("Unable to read current time from RTC\n");
+		return 0;
 	}
-	spin_unlock_irqrestore(&rtc_lock, flags);
-	year = mc146818_decode_year(year);
 
-	return mktime64(year, mon, day, hour, min, sec);
+	return rtc_tm_to_time64(&tm);
 }
+#endif /* CONFIG_RTC_MC146818_LIB */
 
 #endif /* __ASM_MC146818_TIME_H */
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
index 31a31fe78d77..74c5fc0fc6c0 100644
--- a/arch/mips/include/asm/mips-boards/bonito64.h
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -21,7 +21,7 @@
 #ifndef _ASM_MIPS_BOARDS_BONITO64_H
 #define _ASM_MIPS_BOARDS_BONITO64_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 /* offsets from base register */
 #define BONITO(x)	(x)
@@ -36,7 +36,7 @@ extern unsigned long _pcictrl_bonito_pcicfg;
 
 #define BONITO(x)		*(volatile u32 *)(_pcictrl_bonito + (x))
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 
 #define BONITO_BOOT_BASE		0x1fc00000
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 23ce951f445b..407f253bb4a1 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -59,6 +59,16 @@ extern phys_addr_t mips_cm_l2sync_phys_base(void);
  */
 extern int mips_cm_is64;
 
+/*
+ * mips_cm_is_l2_hci_broken  - determine if HCI is broken
+ *
+ * Some CM reports show that Hardware Cache Initialization is
+ * complete, but in reality it's not the case. They also incorrectly
+ * indicate that Hardware Cache Initialization is supported. This
+ * flags allows warning about this broken feature.
+ */
+extern bool mips_cm_is_l2_hci_broken;
+
 /**
  * mips_cm_error_report - Report CM cache errors
  */
@@ -98,6 +108,18 @@ static inline bool mips_cm_present(void)
 }
 
 /**
+ * mips_cm_update_property - update property from the device tree
+ *
+ * Retrieve the properties from the device tree if a CM node exist and
+ * update the internal variable based on this.
+ */
+#ifdef CONFIG_MIPS_CM
+extern void mips_cm_update_property(void);
+#else
+static inline void mips_cm_update_property(void) {}
+#endif
+
+/**
  * mips_cm_has_l2sync - determine whether an L2-only sync region is present
  *
  * Returns true if the system implements an L2-only sync region, else false.
@@ -255,6 +277,12 @@ GCR_ACCESSOR_RW(32, 0x130, l2_config)
 GCR_ACCESSOR_RO(32, 0x150, sys_config2)
 #define CM_GCR_SYS_CONFIG2_MAXVPW		GENMASK(3, 0)
 
+/* GCR_L2-RAM_CONFIG - Configuration & status of L2 cache RAMs */
+GCR_ACCESSOR_RW(64, 0x240, l2_ram_config)
+#define CM_GCR_L2_RAM_CONFIG_PRESENT		BIT(31)
+#define CM_GCR_L2_RAM_CONFIG_HCI_DONE		BIT(30)
+#define CM_GCR_L2_RAM_CONFIG_HCI_SUPPORTED	BIT(29)
+
 /* GCR_L2_PFT_CONTROL - Controls hardware L2 prefetching */
 GCR_ACCESSOR_RW(32, 0x300, l2_pft_control)
 #define CM_GCR_L2_PFT_CONTROL_PAGEMASK		GENMASK(31, 12)
@@ -266,6 +294,18 @@ GCR_ACCESSOR_RW(32, 0x308, l2_pft_control_b)
 #define CM_GCR_L2_PFT_CONTROL_B_CEN		BIT(8)
 #define CM_GCR_L2_PFT_CONTROL_B_PORTID		GENMASK(7, 0)
 
+/* GCR_L2_TAG_ADDR - Access addresses in L2 cache tags */
+GCR_ACCESSOR_RW(64, 0x600, l2_tag_addr)
+
+/* GCR_L2_TAG_STATE - Access L2 cache tag state */
+GCR_ACCESSOR_RW(64, 0x608, l2_tag_state)
+
+/* GCR_L2_DATA - Access data in L2 cache lines */
+GCR_ACCESSOR_RW(64, 0x610, l2_data)
+
+/* GCR_L2_ECC - Access ECC information from L2 cache lines */
+GCR_ACCESSOR_RW(64, 0x618, l2_ecc)
+
 /* GCR_L2SM_COP - L2 cache op state machine control */
 GCR_ACCESSOR_RW(32, 0x620, l2sm_cop)
 #define CM_GCR_L2SM_COP_PRESENT			BIT(31)
diff --git a/arch/mips/include/asm/mips-cps.h b/arch/mips/include/asm/mips-cps.h
index 917009b80e69..1fffd47a4564 100644
--- a/arch/mips/include/asm/mips-cps.h
+++ b/arch/mips/include/asm/mips-cps.h
@@ -258,6 +258,8 @@ static inline bool mips_cps_multicluster_cpus(void)
 
 /**
  * mips_cps_first_online_in_cluster() - Detect if CPU is first online in cluster
+ * @first_cpu: The first other online CPU in cluster, or nr_cpu_ids if
+ * the function returns true.
  *
  * Determine whether the local CPU is the first to be brought online in its
  * cluster - that is, whether there are any other online CPUs in the local
@@ -265,6 +267,6 @@ static inline bool mips_cps_multicluster_cpus(void)
  *
  * Returns true if this CPU is first online, else false.
  */
-extern unsigned int mips_cps_first_online_in_cluster(void);
+extern unsigned int mips_cps_first_online_in_cluster(int *first_cpu);
 
 #endif /* __MIPS_ASM_MIPS_CPS_H__ */
diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h
index b1ee3c48e84b..cab7582010e8 100644
--- a/arch/mips/include/asm/mipsmtregs.h
+++ b/arch/mips/include/asm/mipsmtregs.h
@@ -10,7 +10,7 @@
 
 #include <asm/mipsregs.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * C macros
@@ -176,7 +176,7 @@
 /* TCHalt */
 #define TCHALT_H		(_ULCAST_(1))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline unsigned core_nvpes(void)
 {
@@ -469,6 +469,6 @@ do {									\
 
 __BUILD_SET_C0(mvpcontrol)
 
-#endif /* Not __ASSEMBLY__ */
+#endif /* Not __ASSEMBLER__ */
 
 #endif
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 3c6ddc0c2c7a..f799c0d723da 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -32,7 +32,7 @@
 /*
  *  Configure language
  */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define _ULCAST_
 #define _U64CAST_
 #else
@@ -1346,7 +1346,7 @@
 #define FPU_CSR_RD	0x3	/* towards -Infinity */
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * Macros for handling the ISA mode bit for MIPS16 and microMIPS.
@@ -2039,8 +2039,8 @@ do {									\
 #define read_c0_perfcntr3_64()	__read_64bit_c0_register($25, 7)
 #define write_c0_perfcntr3_64(val) __write_64bit_c0_register($25, 7, val)
 
-#define read_c0_ecc()		__read_32bit_c0_register($26, 0)
-#define write_c0_ecc(val)	__write_32bit_c0_register($26, 0, val)
+#define read_c0_errctl()	__read_32bit_c0_register($26, 0)
+#define write_c0_errctl(val)	__write_32bit_c0_register($26, 0, val)
 
 #define read_c0_derraddr0()	__read_ulong_c0_register($26, 1)
 #define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val)
@@ -3095,6 +3095,6 @@ static inline unsigned int get_ebase_cpunum(void)
 	return read_c0_ebase() & MIPS_EBASE_CPUNUM;
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_MIPSREGS_H */
diff --git a/arch/mips/include/asm/mmzone.h b/arch/mips/include/asm/mmzone.h
index 14226ea42036..602a21aee9d4 100644
--- a/arch/mips/include/asm/mmzone.h
+++ b/arch/mips/include/asm/mmzone.h
@@ -20,6 +20,4 @@
 #define nid_to_addrbase(nid) 0
 #endif
 
-extern void setup_zero_pages(void);
-
 #endif /* _ASM_MMZONE_H_ */
diff --git a/arch/mips/include/asm/msa.h b/arch/mips/include/asm/msa.h
index 236a49ee2e3e..c6077f5fa4b1 100644
--- a/arch/mips/include/asm/msa.h
+++ b/arch/mips/include/asm/msa.h
@@ -8,7 +8,7 @@
 
 #include <asm/mipsregs.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/inst.h>
 
@@ -218,7 +218,7 @@ __BUILD_MSA_CTL_REG(request, 5)
 __BUILD_MSA_CTL_REG(map, 6)
 __BUILD_MSA_CTL_REG(unmap, 7)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #define MSA_IR		0
 #define MSA_CSR		1
diff --git a/arch/mips/cavium-octeon/crypto/octeon-crypto.h b/arch/mips/include/asm/octeon/crypto.h
index cb68f9e284bb..cb68f9e284bb 100644
--- a/arch/mips/cavium-octeon/crypto/octeon-crypto.h
+++ b/arch/mips/include/asm/octeon/crypto.h
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
index 9c476a0400e0..eaeafccd82c7 100644
--- a/arch/mips/include/asm/pci/bridge.h
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -43,7 +43,7 @@
  *    Bridge address map
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define ATE_V		0x01
 #define ATE_CO		0x02
@@ -288,7 +288,7 @@ struct bridge_err_cmdword {
 };
 
 #define berr_field	berr_un.berr_st
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * The values of these macros can and should be crosschecked
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index f4440edcd8fe..7a04381efa0b 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -15,7 +15,6 @@
 
 #define __HAVE_ARCH_PMD_ALLOC_ONE
 #define __HAVE_ARCH_PUD_ALLOC_ONE
-#define __HAVE_ARCH_PGD_FREE
 #include <asm-generic/pgalloc.h>
 
 static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
@@ -49,16 +48,8 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 extern void pgd_init(void *addr);
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
 
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	pagetable_free(virt_to_ptdesc(pgd));
-}
-
-#define __pte_free_tlb(tlb, pte, address)			\
-do {								\
-	pagetable_pte_dtor(page_ptdesc(pte));			\
-	tlb_remove_page_ptdesc((tlb), page_ptdesc(pte));	\
-} while (0)
+#define __pte_free_tlb(tlb, pte, address)	\
+	tlb_remove_ptdesc((tlb), page_ptdesc(pte))
 
 #ifndef __PAGETABLE_PMD_FOLDED
 
@@ -71,7 +62,7 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 	if (!ptdesc)
 		return NULL;
 
-	if (!pagetable_pmd_ctor(ptdesc)) {
+	if (!pagetable_pmd_ctor(mm, ptdesc)) {
 		pagetable_free(ptdesc);
 		return NULL;
 	}
@@ -90,8 +81,7 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
 {
 	pud_t *pud;
-	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL & ~__GFP_HIGHMEM,
-			PUD_TABLE_ORDER);
+	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL, PUD_TABLE_ORDER);
 
 	if (!ptdesc)
 		return NULL;
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index c29a551eb0ca..9c06a612d33a 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -504,12 +504,6 @@ static inline int ptep_set_access_flags(struct vm_area_struct *vma,
 	return true;
 }
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
 #if defined(CONFIG_XPA)
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
@@ -540,7 +534,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 #endif
 
 #if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte.pte_low & _PAGE_SWP_EXCLUSIVE;
 }
@@ -557,7 +551,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 	return pte;
 }
 #else
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -610,9 +604,8 @@ static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
  */
 #ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR
 phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size);
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr,
-		unsigned long pfn, unsigned long size, pgprot_t prot);
-#define io_remap_pfn_range io_remap_pfn_range
+unsigned long io_remap_pfn_range_pfn(unsigned long pfn, unsigned long size);
+#define io_remap_pfn_range_pfn io_remap_pfn_range_pfn
 #else
 #define fixup_bigphys_addr(addr, size)	(addr)
 #endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */
@@ -719,9 +712,6 @@ static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd)
 
 #endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
 
-/* Extern to avoid header file madness */
-extern pmd_t mk_pmd(struct page *page, pgprot_t prot);
-
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 {
 	pmd_val(pmd) = (pmd_val(pmd) & (_PAGE_CHG_MASK | _PAGE_HUGE)) |
diff --git a/arch/mips/include/asm/pm.h b/arch/mips/include/asm/pm.h
index 7ecd4dfe3846..52f3d64c5f34 100644
--- a/arch/mips/include/asm/pm.h
+++ b/arch/mips/include/asm/pm.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_PM_H
 #define __ASM_PM_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #include <asm/asm-offsets.h>
 #include <asm/asm.h>
@@ -130,7 +130,7 @@
 	RESUME_RESTORE_REGS_RETURN
 .endm
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 /**
  * struct mips_static_suspend_state - Core saved CPU state across S2R.
@@ -150,6 +150,6 @@ struct mips_static_suspend_state {
 	unsigned long sp;
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_PM_HELPERS_H */
diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h
index a56594f360ee..4bd359fa3d97 100644
--- a/arch/mips/include/asm/prefetch.h
+++ b/arch/mips/include/asm/prefetch.h
@@ -42,7 +42,7 @@
 #define Pref_WriteBackInvalidate	25
 #define Pref_PrepareForStore		30
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 	.macro	__pref hint addr
 #ifdef CONFIG_CPU_HAS_PREFETCH
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 4a2b40ce39e0..ef72c46b5568 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -27,8 +27,8 @@
  */
 struct pt_regs {
 #ifdef CONFIG_32BIT
-	/* Pad bytes for argument save space on the stack. */
-	unsigned long pad0[8];
+	/* Saved syscall stack arguments; entries 0-3 unused. */
+	unsigned long args[8];
 #endif
 
 	/* Saved main processor registers. */
@@ -65,7 +65,8 @@ static inline void instruction_pointer_set(struct pt_regs *regs,
 
 /* Query offset/name of register from its name/offset */
 extern int regs_query_register_offset(const char *name);
-#define MAX_REG_OFFSET (offsetof(struct pt_regs, __last))
+#define MAX_REG_OFFSET \
+	(offsetof(struct pt_regs, __last) - sizeof(unsigned long))
 
 /**
  * regs_get_register() - get register value from its offset
diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h
index 236051364f78..dd0b558c9767 100644
--- a/arch/mips/include/asm/regdef.h
+++ b/arch/mips/include/asm/regdef.h
@@ -103,7 +103,7 @@
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #if _MIPS_SIM == _MIPS_SIM_ABI32
 
 /*
@@ -192,6 +192,6 @@
 #define ra	$31	/* return address */
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_REGDEF_H */
diff --git a/arch/mips/include/asm/sgi/heart.h b/arch/mips/include/asm/sgi/heart.h
index 0d03751955c4..c224c2e3575a 100644
--- a/arch/mips/include/asm/sgi/heart.h
+++ b/arch/mips/include/asm/sgi/heart.h
@@ -4,7 +4,7 @@
  *
  * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org>
  *		 2009 Johannes Dickgreber <tanzy@gmx.de>
- *		 2007-2015 Joshua Kinard <kumba@gentoo.org>
+ *		 2007-2015 Joshua Kinard <linux@kumba.dev>
  */
 #ifndef __ASM_SGI_HEART_H
 #define __ASM_SGI_HEART_H
diff --git a/arch/mips/include/asm/sibyte/board.h b/arch/mips/include/asm/sibyte/board.h
index 03463faa4244..d29c1c013dc5 100644
--- a/arch/mips/include/asm/sibyte/board.h
+++ b/arch/mips/include/asm/sibyte/board.h
@@ -19,7 +19,7 @@
 #include <asm/sibyte/bigsur.h>
 #endif
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef LEDS_PHYS
 #define setleds(t0, t1, c0, c1, c2, c3) \
@@ -46,6 +46,6 @@ extern void setleds(char *str);
 #define setleds(s) do { } while (0)
 #endif /* LEDS_PHYS */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _SIBYTE_BOARD_H */
diff --git a/arch/mips/include/asm/sibyte/sb1250.h b/arch/mips/include/asm/sibyte/sb1250.h
index 495b31925ed7..de4b352256c8 100644
--- a/arch/mips/include/asm/sibyte/sb1250.h
+++ b/arch/mips/include/asm/sibyte/sb1250.h
@@ -19,7 +19,7 @@
 
 #define SB1250_DUART_MINOR_BASE		64
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/addrspace.h>
 
diff --git a/arch/mips/include/asm/sibyte/sb1250_defs.h b/arch/mips/include/asm/sibyte/sb1250_defs.h
index 68cd7c0b37ea..98cbb65cce0a 100644
--- a/arch/mips/include/asm/sibyte/sb1250_defs.h
+++ b/arch/mips/include/asm/sibyte/sb1250_defs.h
@@ -199,7 +199,7 @@
  * Note: you'll need to define uint32_t and uint64_t in your headers.
  */
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 #define _SB_MAKE64(x) ((uint64_t)(x))
 #define _SB_MAKE32(x) ((uint32_t)(x))
 #else
@@ -238,9 +238,9 @@
  */
 
 
-#if defined(__mips64) && !defined(__ASSEMBLY__)
+#if defined(__mips64) && !defined(__ASSEMBLER__)
 #define SBWRITECSR(csr, val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val)
 #define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr)))
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/mips/include/asm/smp-cps.h b/arch/mips/include/asm/smp-cps.h
index ab94e50f62b8..63620abbd067 100644
--- a/arch/mips/include/asm/smp-cps.h
+++ b/arch/mips/include/asm/smp-cps.h
@@ -9,7 +9,7 @@
 
 #define CPS_ENTRY_PATCH_INSNS	6
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct vpe_boot_config {
 	unsigned long pc;
@@ -22,7 +22,13 @@ struct core_boot_config {
 	struct vpe_boot_config *vpe_config;
 };
 
-extern struct core_boot_config *mips_cps_core_bootcfg;
+struct cluster_boot_config {
+	unsigned long *core_power;
+	struct cpumask cpumask;
+	struct core_boot_config *core_config;
+};
+
+extern struct cluster_boot_config *mips_cps_cluster_bootcfg;
 
 extern void mips_cps_core_boot(int cca, void __iomem *gcr_base);
 extern void mips_cps_core_init(void);
@@ -49,9 +55,9 @@ static inline bool mips_cps_smp_in_use(void) { return false; }
 
 #endif /* !CONFIG_MIPS_CPS */
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 .extern mips_cps_bootcfg;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __MIPS_ASM_SMP_CPS_H__ */
diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
index 837d23e24976..7c675fecbf9a 100644
--- a/arch/mips/include/asm/sn/addrs.h
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -10,10 +10,10 @@
 #define _ASM_SN_ADDRS_H
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/smp.h>
 #include <linux/types.h>
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #include <asm/addrspace.h>
 #include <asm/sn/kldir.h>
@@ -25,15 +25,15 @@
 #endif
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define UINT64_CAST		(unsigned long)
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 #define UINT64_CAST
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 
 #define NASID_GET_META(_n)	((_n) >> NASID_LOCAL_BITS)
@@ -254,7 +254,7 @@
 #define LOCAL_HUB_ADDR(_x)	(IALIAS_BASE + (_x))
 #define REMOTE_HUB_ADDR(_n, _x) ((NODE_SWIN_BASE(_n, 1) + 0x800000 + (_x)))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define LOCAL_HUB_PTR(_x)	((u64 *)LOCAL_HUB_ADDR((_x)))
 #define REMOTE_HUB_PTR(_n, _x)	((u64 *)REMOTE_HUB_ADDR((_n), (_x)))
@@ -265,7 +265,7 @@
 #define REMOTE_HUB_S(_n, _r, _d)	__raw_writeq((_d),		\
 						REMOTE_HUB_PTR((_n), (_r)))
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Software structure locations -- permanently fixed
@@ -315,7 +315,7 @@
 #define KLI_KERN_XP		8
 #define KLI_KERN_PARTID		9
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define KLD_BASE(nasid)		((kldir_ent_t *) KLDIR_ADDR(nasid))
 #define KLD_LAUNCH(nasid)	(KLD_BASE(nasid) + KLI_LAUNCH)
@@ -371,7 +371,7 @@
 #define KERN_VARS_ADDR(nasid)	KLD_KERN_VARS(nasid)->pointer
 #define KERN_VARS_SIZE(nasid)	KLD_KERN_VARS(nasid)->size
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 
 #endif /* _ASM_SN_ADDRS_H */
diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h
index 5b8c96d5b587..d8fd80137206 100644
--- a/arch/mips/include/asm/sn/gda.h
+++ b/arch/mips/include/asm/sn/gda.h
@@ -39,7 +39,7 @@
 #define G_PARTIDOFF	40
 #define G_TABLEOFF	128
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef struct gda {
 	u32	g_magic;	/* GDA magic number */
@@ -63,7 +63,7 @@ typedef struct gda {
 
 #define GDA ((gda_t*) GDA_ADDR(get_nasid()))
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 /*
  * Define:	PART_GDA_VERSION
  * Purpose:	Define the minimum version of the GDA required, lower
diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h
index 245f59bf3845..f394b1e0c956 100644
--- a/arch/mips/include/asm/sn/kldir.h
+++ b/arch/mips/include/asm/sn/kldir.h
@@ -15,7 +15,7 @@
 #define KLDIR_ENT_SIZE			0x40
 #define KLDIR_MAX_ENTRIES		(0x400 / 0x40)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 typedef struct kldir_ent_s {
 	u64		magic;		/* Indicates validity of entry	    */
 	off_t		offset;		/* Offset from start of node space  */
@@ -27,7 +27,7 @@ typedef struct kldir_ent_s {
 	/* NOTE: These 16 bytes are used in the Partition KLDIR
 	   entry to store partition info. Refer to klpart.h for this. */
 } kldir_ent_t;
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #ifdef CONFIG_SGI_IP27
 #include <asm/sn/sn0/kldir.h>
diff --git a/arch/mips/include/asm/sn/klkernvars.h b/arch/mips/include/asm/sn/klkernvars.h
index ea6b21795163..bb7a6c36f6e7 100644
--- a/arch/mips/include/asm/sn/klkernvars.h
+++ b/arch/mips/include/asm/sn/klkernvars.h
@@ -12,7 +12,7 @@
 
 #define KV_MAGIC		0x5f4b565f
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/sn/types.h>
 
@@ -24,6 +24,6 @@ typedef struct kern_vars_s {
 	unsigned long	kv_rw_baseaddr;
 } kern_vars_t;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_SN_KLKERNVARS_H */
diff --git a/arch/mips/include/asm/sn/launch.h b/arch/mips/include/asm/sn/launch.h
index 04226d8d30c4..ce95187362e7 100644
--- a/arch/mips/include/asm/sn/launch.h
+++ b/arch/mips/include/asm/sn/launch.h
@@ -59,7 +59,7 @@
  * clears the BUSY flag after control is returned to it.
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef int launch_state_t;
 typedef void (*launch_proc_t)(u64 call_parm);
@@ -101,6 +101,6 @@ typedef struct launch_s {
 #define LAUNCH_FLASH	(*(void (*)(void)) \
 			 IP27PROM_FLASHLEDS)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_SN_LAUNCH_H */
diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h
index 12ac210f12a1..eff51606bbce 100644
--- a/arch/mips/include/asm/sn/nmi.h
+++ b/arch/mips/include/asm/sn/nmi.h
@@ -48,7 +48,7 @@
  *
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef struct nmi_s {
 	volatile unsigned long	 magic;		/* Magic number */
@@ -59,13 +59,13 @@ typedef struct nmi_s {
 	volatile unsigned long	 gmaster;	/* Flag true only on global master*/
 } nmi_t;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* Following definitions are needed both in the prom & the kernel
  * to identify the format of the nmi cpu register save area in the
  * low memory on each node.
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct reg_struct {
 	unsigned long	gpr[32];
@@ -78,7 +78,7 @@ struct reg_struct {
 	unsigned long	nmi_sr;
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* These are the assembly language offsets into the reg_struct structure */
 
diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h
index f13df84edfdd..a28158a91ecf 100644
--- a/arch/mips/include/asm/sn/sn0/addrs.h
+++ b/arch/mips/include/asm/sn/sn0/addrs.h
@@ -84,15 +84,15 @@
 #define NASID_GET(_pa)		(int) ((UINT64_CAST (_pa) >>		\
 					NASID_SHFT) & NASID_BITMASK)
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 
 #define NODE_SWIN_BASE(nasid, widget)					\
 	((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN)		\
 	: RAW_NODE_SWIN_BASE(nasid, widget))
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 #define NODE_SWIN_BASE(nasid, widget) \
      (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS))
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * The following definitions pertain to the IO special address
@@ -139,11 +139,11 @@
 /* Turn on sable logging for the processors whose bits are set. */
 #define SABLE_LOG_TRIGGER(_map)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define KERN_NMI_ADDR(nasid, slice)					\
 		    TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET +	\
 				  (IP27_NMI_KREGS_CPU_SIZE * (slice)))
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #ifdef PROM
 
@@ -248,7 +248,7 @@
 #define KL_UART_DATA	LOCAL_HUB_ADDR(MD_UREG0_1)	/* UART data reg */
 #define KL_I2C_REG	MD_UREG0_0			/* I2C reg */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* Address 0x400 to 0x1000 ualias points to cache error eframe + misc
  * CACHE_ERR_SP_PTR could either contain an address to the stack, or
@@ -266,7 +266,7 @@
 #define CACHE_ERR_SP		(CACHE_ERR_SP_PTR - 16)
 #define CACHE_ERR_AREA_SIZE	(ARCS_SPB_OFFSET - CACHE_ERR_EFRAME)
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #define _ARCSPROM
 
diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h
index c84adde36d41..916394319af5 100644
--- a/arch/mips/include/asm/sn/sn0/hub.h
+++ b/arch/mips/include/asm/sn/sn0/hub.h
@@ -37,7 +37,7 @@
 #define UATTR_MSPEC	2
 #define UATTR_UNCAC	3
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 /*
  * Returns the local nasid into res.
  */
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
index 57ece90f8cf1..c489426f8f9e 100644
--- a/arch/mips/include/asm/sn/sn0/hubio.h
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -169,7 +169,7 @@
 /*
  * The IO LLP control status register and widget control register
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef union hubii_wid_u {
 	u64	wid_reg_value;
@@ -292,7 +292,7 @@ typedef union io_perf_cnt {
 	} perf_cnt_bits;
 } io_perf_cnt_t;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 
 #define LNK_STAT_WORKING	0x2
@@ -440,7 +440,7 @@ typedef union io_perf_cnt {
 /*
  * Fields in CRB Register A
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 typedef union icrba_u {
 	u64	reg_value;
 	struct {
@@ -486,7 +486,7 @@ typedef union h1_icrba_u {
 #define ICRBN_A_CERR_SHFT	54
 #define ICRBN_A_ERR_MASK	0x3ff
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #define IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
 
@@ -509,7 +509,7 @@ typedef union h1_icrba_u {
 /*
  * Fields in CRB Register B
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 typedef union icrbb_u {
 	u64	reg_value;
 	struct {
@@ -608,7 +608,7 @@ typedef union h1_icrbb_u {
 #define b_imsg		icrbb_field_s.imsg
 #define b_initiator	icrbb_field_s.initiator
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * values for field xtsize
@@ -666,7 +666,7 @@ typedef union h1_icrbb_u {
  * Fields in CRB Register C
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef union icrbc_s {
 	u64	reg_value;
@@ -698,13 +698,13 @@ typedef union icrbc_s {
 #define c_barrop	icrbc_field_s.barrop
 #define c_doresp	icrbc_field_s.doresp
 #define c_gbr	icrbc_field_s.gbr
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Fields in CRB Register D
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 typedef union icrbd_s {
 	u64	reg_value;
 	struct {
@@ -737,7 +737,7 @@ typedef union hubii_ifdr_u {
 	} hi_ifdr_fields;
 } hubii_ifdr_t;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Hardware designed names for the BTE control registers.
@@ -784,7 +784,7 @@ typedef union hubii_ifdr_u {
  * IO PIO Read Table Entry format
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef union iprte_a {
 	u64	entry;
@@ -806,7 +806,7 @@ typedef union iprte_a {
 #define iprte_init	iprte_fields.initiator
 #define iprte_addr	iprte_fields.addr
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #define IPRTE_ADDRSHFT	3
 
@@ -814,7 +814,7 @@ typedef union iprte_a {
  * Hub IIO PRB Register format.
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * Note: Fields bnakctr, anakctr, xtalkctrmode, ovflow fields are
  * "Status" fields, and should only be used in case of clean up after errors.
@@ -846,7 +846,7 @@ typedef union iprb_u {
 #define iprb_anakctr	iprb_fields_s.anakctr
 #define iprb_xtalkctr	iprb_fields_s.xtalkctr
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * values for mode field in iprb_t.
@@ -861,7 +861,7 @@ typedef union iprb_u {
 /*
  * IO CRB entry C_A to E_A : Partial (cache) CRBS
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 typedef union icrbp_a {
 	u64   ip_reg;	    /* the entire register value	*/
 	struct {
@@ -895,7 +895,7 @@ typedef union icrbp_a {
 	} ip_fmt;
 } icrbp_a_t;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * A couple of defines to go with the above structure.
@@ -903,7 +903,7 @@ typedef union icrbp_a {
 #define ICRBP_A_CERR_SHFT	54
 #define ICRBP_A_ERR_MASK	0x3ff
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 typedef union hubii_idsr {
 	u64 iin_reg;
 	struct {
@@ -917,7 +917,7 @@ typedef union hubii_idsr {
 		    level : 7;
 	} iin_fmt;
 } hubii_idsr_t;
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * IO BTE Length/Status (IIO_IBLS) register bit field definitions
diff --git a/arch/mips/include/asm/sn/sn0/hubmd.h b/arch/mips/include/asm/sn/sn0/hubmd.h
index 305d002be182..97d9cbbf9f4c 100644
--- a/arch/mips/include/asm/sn/sn0/hubmd.h
+++ b/arch/mips/include/asm/sn/sn0/hubmd.h
@@ -423,7 +423,7 @@
  * Operations on page migration threshold register
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * LED register macros
@@ -735,7 +735,7 @@ typedef union md_perf_cnt {
 } md_perf_cnt_t;
 
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 
 #define DIR_ERROR_VALID_MASK	0xe000000000000000
diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h
index b8253142cb83..4830bae723e4 100644
--- a/arch/mips/include/asm/sn/sn0/hubni.h
+++ b/arch/mips/include/asm/sn/sn0/hubni.h
@@ -11,7 +11,7 @@
 #ifndef _ASM_SGI_SN0_HUBNI_H
 #define _ASM_SGI_SN0_HUBNI_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 #endif
 
@@ -226,7 +226,7 @@
 
 #define NLT_EXIT_PORT_MASK (UINT64_CAST 0xf)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef union	hubni_port_error_u {
 	u64	nipe_reg_value;
@@ -258,6 +258,6 @@ static inline int get_region_shift(void)
 	return NASID_TO_COARSEREG_SHFT;
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_SGI_SN0_HUBNI_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubpi.h b/arch/mips/include/asm/sn/sn0/hubpi.h
index 7b83655913c5..a4fe0feeef0c 100644
--- a/arch/mips/include/asm/sn/sn0/hubpi.h
+++ b/arch/mips/include/asm/sn/sn0/hubpi.h
@@ -306,7 +306,7 @@
 #define ERR_STACK_SIZE_BYTES(_sz) \
        ((_sz) ? (PI_MIN_STACK_SIZE << ((_sz) - 1)) : 0)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * format of error stack and error status registers.
  */
@@ -359,7 +359,7 @@ typedef union pi_err_stat1 {
 
 typedef u64	rtc_time_t;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 
 /* Bits in PI_SYSAD_ERRCHK_EN */
diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h
index 451ba1ee41ad..53d04c04d6f5 100644
--- a/arch/mips/include/asm/sn/types.h
+++ b/arch/mips/include/asm/sn/types.h
@@ -11,7 +11,7 @@
 
 #include <linux/types.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef unsigned long	cpuid_t;
 typedef signed short	nasid_t;	/* node id in numa-as-id space */
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index 4724a563c5bf..43a09f0dd3ff 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -36,15 +36,6 @@ enum sock_type {
 	SOCK_PACKET	= 10,
 };
 
-#define SOCK_MAX (SOCK_PACKET + 1)
-/* Mask which covers at least up to SOCK_MASK-1.  The
- *  * remaining bits are used as flags. */
-#define SOCK_TYPE_MASK 0xf
-
-/* Flags for socket, socketpair, paccept */
-#define SOCK_CLOEXEC	O_CLOEXEC
-#define SOCK_NONBLOCK	O_NONBLOCK
-
 #define ARCH_HAS_SOCKET_TYPES 1
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/mips/include/asm/sync.h b/arch/mips/include/asm/sync.h
index 44c04a82d0b7..d7873e8d7e6f 100644
--- a/arch/mips/include/asm/sync.h
+++ b/arch/mips/include/asm/sync.h
@@ -193,7 +193,7 @@
  * Preprocessor magic to expand macros used as arguments before we insert them
  * into assembly code.
  */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 # define ___SYNC(type, reason, else)				\
 	____SYNC(type, reason, else)
 #else
diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h
index ebdf4d910af2..d19e67e2aa6a 100644
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@@ -41,6 +41,21 @@ static inline long syscall_get_nr(struct task_struct *task,
 	return task_thread_info(task)->syscall;
 }
 
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	/*
+	 * New syscall number has to be assigned to regs[2] because
+	 * it is loaded from there unconditionally after return from
+	 * syscall_trace_enter() invocation.
+	 *
+	 * Consequently, if the syscall was indirect and nr != __NR_syscall,
+	 * then after this assignment the syscall will cease to be indirect.
+	 */
+	task_thread_info(task)->syscall = regs->regs[2] = nr;
+}
+
 static inline void mips_syscall_update_nr(struct task_struct *task,
 					  struct pt_regs *regs)
 {
@@ -57,37 +72,38 @@ static inline void mips_syscall_update_nr(struct task_struct *task,
 static inline void mips_get_syscall_arg(unsigned long *arg,
 	struct task_struct *task, struct pt_regs *regs, unsigned int n)
 {
-	unsigned long usp __maybe_unused = regs->regs[29];
-
+#ifdef CONFIG_32BIT
 	switch (n) {
 	case 0: case 1: case 2: case 3:
 		*arg = regs->regs[4 + n];
-
 		return;
-
-#ifdef CONFIG_32BIT
 	case 4: case 5: case 6: case 7:
-		get_user(*arg, (int *)usp + n);
+		*arg = regs->args[n];
 		return;
+	}
+#else
+	*arg = regs->regs[4 + n];
+	if ((IS_ENABLED(CONFIG_MIPS32_O32) &&
+	     test_tsk_thread_flag(task, TIF_32BIT_REGS)))
+		*arg = (unsigned int)*arg;
 #endif
+}
 
-#ifdef CONFIG_64BIT
+static inline void mips_set_syscall_arg(unsigned long *arg,
+	struct task_struct *task, struct pt_regs *regs, unsigned int n)
+{
+#ifdef CONFIG_32BIT
+	switch (n) {
+	case 0: case 1: case 2: case 3:
+		regs->regs[4 + n] = *arg;
+		return;
 	case 4: case 5: case 6: case 7:
-#ifdef CONFIG_MIPS32_O32
-		if (test_tsk_thread_flag(task, TIF_32BIT_REGS))
-			get_user(*arg, (int *)usp + n);
-		else
-#endif
-			*arg = regs->regs[4 + n];
-
+		*arg = regs->args[n] = *arg;
 		return;
-#endif
-
-	default:
-		BUG();
 	}
-
-	unreachable();
+#else
+	regs->regs[4 + n] = *arg;
+#endif
 }
 
 static inline long syscall_get_error(struct task_struct *task,
@@ -136,6 +152,17 @@ static inline void syscall_get_arguments(struct task_struct *task,
 		mips_get_syscall_arg(args++, task, regs, i++);
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	unsigned int i = 0;
+	unsigned int n = 6;
+
+	while (n--)
+		mips_set_syscall_arg(args++, task, regs, i++);
+}
+
 extern const unsigned long sys_call_table[];
 extern const unsigned long sys32_call_table[];
 extern const unsigned long sysn32_call_table[];
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index b9d76e8ac5a2..2707dad260dd 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -11,7 +11,7 @@
 #ifdef __KERNEL__
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/processor.h>
 
@@ -73,7 +73,7 @@ static inline struct thread_info *current_thread_info(void)
 register unsigned long current_stack_pointer __asm__("sp");
 #endif
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* thread information allocation */
 #if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT)
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index e855a3611d92..5e7193b759f3 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -55,7 +55,7 @@ static inline int mips_clockevent_init(void)
  */
 extern int init_r4k_clocksource(void);
 
-static inline int init_mips_clocksource(void)
+static inline __init int init_mips_clocksource(void)
 {
 #ifdef CONFIG_CSRC_R4K
 	return init_r4k_clocksource();
diff --git a/arch/mips/include/asm/topology.h b/arch/mips/include/asm/topology.h
index 0673d2d0f2e6..5158c802eb65 100644
--- a/arch/mips/include/asm/topology.h
+++ b/arch/mips/include/asm/topology.h
@@ -16,6 +16,9 @@
 #define topology_core_id(cpu)			(cpu_core(&cpu_data[cpu]))
 #define topology_core_cpumask(cpu)		(&cpu_core_map[cpu])
 #define topology_sibling_cpumask(cpu)		(&cpu_sibling_map[cpu])
+
+extern struct cpumask __cpu_primary_thread_mask;
+#define cpu_primary_thread_mask ((const struct cpumask *)&__cpu_primary_thread_mask)
 #endif
 
 #endif /* __ASM_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index ba83d3fb0a84..6a974b990f4b 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -29,7 +29,7 @@
 #define NR_syscalls  (__NR_O32_Linux + __NR_O32_Linux_syscalls)
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_OLD_READDIR
@@ -62,6 +62,6 @@
 /* whitelists for checksyscalls */
 #define __IGNORE_fadvise64_64
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_UNISTD_H */
diff --git a/arch/mips/include/asm/vdso/gettimeofday.h b/arch/mips/include/asm/vdso/gettimeofday.h
index 44a45f3fa4b0..32d2d173fdc0 100644
--- a/arch/mips/include/asm/vdso/gettimeofday.h
+++ b/arch/mips/include/asm/vdso/gettimeofday.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_VDSO_GETTIMEOFDAY_H
 #define __ASM_VDSO_GETTIMEOFDAY_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/vdso/vdso.h>
 #include <asm/clocksource.h>
@@ -167,7 +167,7 @@ static __always_inline u64 read_r4k_count(void)
 
 #ifdef CONFIG_CLKSRC_MIPS_GIC
 
-static __always_inline u64 read_gic_count(const struct vdso_data *data)
+static __always_inline u64 read_gic_count(const struct vdso_time_data *data)
 {
 	void __iomem *gic = get_gic(data);
 	u32 hi, hi2, lo;
@@ -184,7 +184,7 @@ static __always_inline u64 read_gic_count(const struct vdso_data *data)
 #endif
 
 static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
-						 const struct vdso_data *vd)
+						 const struct vdso_time_data *vd)
 {
 #ifdef CONFIG_CSRC_R4K
 	if (clock_mode == VDSO_CLOCKMODE_R4K)
@@ -209,11 +209,12 @@ static inline bool mips_vdso_hres_capable(void)
 }
 #define __arch_vdso_hres_capable mips_vdso_hres_capable
 
-static __always_inline const struct vdso_data *__arch_get_vdso_data(void)
+static __always_inline const struct vdso_time_data *__arch_get_vdso_u_time_data(void)
 {
-	return get_vdso_data();
+	return get_vdso_time_data();
 }
+#define __arch_get_vdso_u_time_data __arch_get_vdso_u_time_data
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/mips/include/asm/vdso/processor.h b/arch/mips/include/asm/vdso/processor.h
index 511c95d735e6..05cdb366dc21 100644
--- a/arch/mips/include/asm/vdso/processor.h
+++ b/arch/mips/include/asm/vdso/processor.h
@@ -5,7 +5,7 @@
 #ifndef __ASM_VDSO_PROCESSOR_H
 #define __ASM_VDSO_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_CPU_LOONGSON64
 /*
@@ -22,6 +22,6 @@
 #define cpu_relax()	barrier()
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_PROCESSOR_H */
diff --git a/arch/mips/include/asm/vdso/vdso.h b/arch/mips/include/asm/vdso/vdso.h
index 6cd88191fefa..6889e0f2e5db 100644
--- a/arch/mips/include/asm/vdso/vdso.h
+++ b/arch/mips/include/asm/vdso/vdso.h
@@ -5,16 +5,18 @@
  */
 
 #include <asm/sgidefs.h>
+#include <vdso/page.h>
 
-#ifndef __ASSEMBLY__
+#define __VDSO_PAGES 4
+
+#ifndef __ASSEMBLER__
 
 #include <asm/asm.h>
-#include <asm/page.h>
 #include <asm/vdso.h>
 
-static inline unsigned long get_vdso_base(void)
+static inline const struct vdso_time_data *get_vdso_time_data(void)
 {
-	unsigned long addr;
+	const struct vdso_time_data *addr;
 
 	/*
 	 * We can't use cpu_has_mips_r6 since it needs the cpu_data[]
@@ -27,7 +29,7 @@ static inline unsigned long get_vdso_base(void)
 	 * We can't use addiupc because there is no label-label
 	 * support for the addiupc reloc
 	 */
-	__asm__("lapc	%0, _start			\n"
+	__asm__("lapc	%0, vdso_u_time_data		\n"
 		: "=r" (addr) : :);
 #else
 	/*
@@ -46,7 +48,7 @@ static inline unsigned long get_vdso_base(void)
 	"	.set noreorder				\n"
 	"	bal	1f				\n"
 	"	 nop					\n"
-	"	.word	_start - .			\n"
+	"	.word	vdso_u_time_data - .		\n"
 	"1:	lw	%0, 0($31)			\n"
 	"	" STR(PTR_ADDU) " %0, $31, %0		\n"
 	"	.set pop				\n"
@@ -58,18 +60,13 @@ static inline unsigned long get_vdso_base(void)
 	return addr;
 }
 
-static inline const struct vdso_data *get_vdso_data(void)
-{
-	return (const struct vdso_data *)(get_vdso_base() - PAGE_SIZE);
-}
-
 #ifdef CONFIG_CLKSRC_MIPS_GIC
 
-static inline void __iomem *get_gic(const struct vdso_data *data)
+static inline void __iomem *get_gic(const struct vdso_time_data *data)
 {
 	return (void __iomem *)((unsigned long)data & PAGE_MASK) - PAGE_SIZE;
 }
 
 #endif /* CONFIG_CLKSRC_MIPS_GIC */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
diff --git a/arch/mips/include/asm/vdso/vsyscall.h b/arch/mips/include/asm/vdso/vsyscall.h
index a4582870aaea..0f061a9babd1 100644
--- a/arch/mips/include/asm/vdso/vsyscall.h
+++ b/arch/mips/include/asm/vdso/vsyscall.h
@@ -2,25 +2,15 @@
 #ifndef __ASM_VDSO_VSYSCALL_H
 #define __ASM_VDSO_VSYSCALL_H
 
-#ifndef __ASSEMBLY__
+#include <asm/page.h>
 
-#include <vdso/datapage.h>
-
-extern struct vdso_data *vdso_data;
+#ifndef __ASSEMBLER__
 
-/*
- * Update the vDSO data page to keep in sync with kernel timekeeping.
- */
-static __always_inline
-struct vdso_data *__mips_get_k_vdso_data(void)
-{
-	return vdso_data;
-}
-#define __arch_get_k_vdso_data __mips_get_k_vdso_data
+#include <vdso/datapage.h>
 
 /* The asm-generic header needs to be included after the definitions above */
 #include <asm-generic/vdso/vsyscall.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_VSYSCALL_H */
diff --git a/arch/mips/include/asm/vpe.h b/arch/mips/include/asm/vpe.h
index 61fd4d0aeda4..c0769dc4b853 100644
--- a/arch/mips/include/asm/vpe.h
+++ b/arch/mips/include/asm/vpe.h
@@ -119,4 +119,12 @@ void cleanup_tc(struct tc *tc);
 
 int __init vpe_module_init(void);
 void __exit vpe_module_exit(void);
+
+#ifdef CONFIG_MIPS_VPE_LOADER_MT
+void *vpe_alloc(void);
+int vpe_start(void *vpe, unsigned long start);
+int vpe_stop(void *vpe);
+int vpe_free(void *vpe);
+#endif /* CONFIG_MIPS_VPE_LOADER_MT */
+
 #endif /* _ASM_VPE_H */
diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h
index 680e7efebbaf..dfe6a3fce65a 100644
--- a/arch/mips/include/asm/xtalk/xtalk.h
+++ b/arch/mips/include/asm/xtalk/xtalk.h
@@ -12,7 +12,7 @@
 #ifndef _ASM_XTALK_XTALK_H
 #define _ASM_XTALK_XTALK_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * User-level device driver visible types
  */
@@ -47,6 +47,6 @@ typedef struct xtalk_piomap_s *xtalk_piomap_t;
 #define XIO_PORT(x)	((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
 #define XIO_PACK(p, o)	((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_XTALK_XTALK_H */
diff --git a/arch/mips/include/asm/xtalk/xwidget.h b/arch/mips/include/asm/xtalk/xwidget.h
index 24f121da6a1d..efcfe4494576 100644
--- a/arch/mips/include/asm/xtalk/xwidget.h
+++ b/arch/mips/include/asm/xtalk/xwidget.h
@@ -203,7 +203,7 @@ static const struct widget_ident __initconst widget_idents[] = {
  * widget target flush register are widget dependent thus will not be
  * defined here
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 typedef u32 widgetreg_t;
 
 /* widget configuration registers */
@@ -274,6 +274,6 @@ typedef struct xwidget_hwid_s {
 	((hwid2)->mfg_num == XWIDGET_MFG_NUM_NONE) || \
 	((hwid1)->mfg_num == (hwid2)->mfg_num)))
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_XTALK_XWIDGET_H */
diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h
index d118d4731580..72fb1b006da9 100644
--- a/arch/mips/include/uapi/asm/socket.h
+++ b/arch/mips/include/uapi/asm/socket.h
@@ -159,6 +159,13 @@
 
 #define SCM_TS_OPT_ID		81
 
+#define SO_RCVPRIORITY		82
+
+#define SO_PASSRIGHTS		83
+
+#define SO_INQ			84
+#define SCM_INQ			SO_INQ
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index c97b089b9902..eb9fb2f2a720 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -521,18 +521,24 @@ static void jazz_dma_free(struct device *dev, size_t size, void *vaddr,
 	__free_pages(virt_to_page(vaddr), get_order(size));
 }
 
-static dma_addr_t jazz_dma_map_page(struct device *dev, struct page *page,
-		unsigned long offset, size_t size, enum dma_data_direction dir,
-		unsigned long attrs)
+static dma_addr_t jazz_dma_map_phys(struct device *dev, phys_addr_t phys,
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
-	phys_addr_t phys = page_to_phys(page) + offset;
+	if (unlikely(attrs & DMA_ATTR_MMIO))
+		/*
+		 * This check is included because older versions of the code lacked
+		 * MMIO path support, and my ability to test this path is limited.
+		 * However, from a software technical standpoint, there is no restriction,
+		 * as the following code operates solely on physical addresses.
+		 */
+		return DMA_MAPPING_ERROR;
 
 	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 		arch_sync_dma_for_device(phys, size, dir);
 	return vdma_alloc(phys, size);
 }
 
-static void jazz_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
+static void jazz_dma_unmap_phys(struct device *dev, dma_addr_t dma_addr,
 		size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
 	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
@@ -607,8 +613,8 @@ static void jazz_dma_sync_sg_for_cpu(struct device *dev,
 const struct dma_map_ops jazz_dma_ops = {
 	.alloc			= jazz_dma_alloc,
 	.free			= jazz_dma_free,
-	.map_page		= jazz_dma_map_page,
-	.unmap_page		= jazz_dma_unmap_page,
+	.map_phys		= jazz_dma_map_phys,
+	.unmap_phys		= jazz_dma_unmap_phys,
 	.map_sg			= jazz_dma_map_sg,
 	.unmap_sg		= jazz_dma_unmap_sg,
 	.sync_single_for_cpu	= jazz_dma_sync_single_for_cpu,
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index ecf3278a32f7..95a1e674fd67 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the Linux/MIPS kernel.
 #
 
-extra-y		:= vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 
 obj-y		+= head.o branch.o cmpxchg.o elf.o entry.o genex.o idle.o irq.o \
 		   process.o prom.o ptrace.o reset.o setup.o signal.o \
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index cb1045ebab06..5debd9a3854a 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -9,6 +9,8 @@
  * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2000 MIPS Technologies, Inc.
  */
+#define COMPILE_OFFSETS
+
 #include <linux/compat.h>
 #include <linux/types.h>
 #include <linux/sched.h>
@@ -27,6 +29,12 @@ void output_ptreg_defines(void);
 void output_ptreg_defines(void)
 {
 	COMMENT("MIPS pt_regs offsets.");
+#ifdef CONFIG_32BIT
+	OFFSET(PT_ARG4, pt_regs, args[4]);
+	OFFSET(PT_ARG5, pt_regs, args[5]);
+	OFFSET(PT_ARG6, pt_regs, args[6]);
+	OFFSET(PT_ARG7, pt_regs, args[7]);
+#endif
 	OFFSET(PT_R0, pt_regs, regs[0]);
 	OFFSET(PT_R1, pt_regs, regs[1]);
 	OFFSET(PT_R2, pt_regs, regs[2]);
@@ -404,6 +412,9 @@ void output_cps_defines(void)
 {
 	COMMENT(" MIPS CPS offsets. ");
 
+	OFFSET(CLUSTERBOOTCFG_CORECONFIG, cluster_boot_config, core_config);
+	DEFINE(CLUSTERBOOTCFG_SIZE, sizeof(struct cluster_boot_config));
+
 	OFFSET(COREBOOTCFG_VPEMASK, core_boot_config, vpe_mask);
 	OFFSET(COREBOOTCFG_VPECONFIG, core_boot_config, vpe_config);
 	DEFINE(COREBOOTCFG_SIZE, sizeof(struct core_boot_config));
diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c
index d39a2963b451..2a14dc4ee57e 100644
--- a/arch/mips/kernel/cevt-bcm1480.c
+++ b/arch/mips/kernel/cevt-bcm1480.c
@@ -103,7 +103,7 @@ void sb1480_clockevent_init(void)
 
 	BUG_ON(cpu > 3);	/* Only have 4 general purpose timers */
 
-	sprintf(name, "bcm1480-counter-%d", cpu);
+	sprintf(name, "bcm1480-counter-%u", cpu);
 	cd->name		= name;
 	cd->features		= CLOCK_EVT_FEAT_PERIODIC |
 				  CLOCK_EVT_FEAT_ONESHOT;
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
index 9a47fbcd4638..de64d6bb7ba3 100644
--- a/arch/mips/kernel/cevt-ds1287.c
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -10,6 +10,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/irq.h>
 
+#include <asm/ds1287.h>
 #include <asm/time.h>
 
 int ds1287_timer_state(void)
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index f876309130ad..2ae7034a3d5c 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -19,6 +19,10 @@
 #define GCR_CPC_BASE_OFS	0x0088
 #define GCR_CL_COHERENCE_OFS	0x2008
 #define GCR_CL_ID_OFS		0x2028
+#define  CM3_GCR_Cx_ID_CLUSTER_SHF	8
+#define  CM3_GCR_Cx_ID_CLUSTER_MSK	(0xff << 8)
+#define  CM3_GCR_Cx_ID_CORENUM_SHF	0
+#define  CM3_GCR_Cx_ID_CORENUM_MSK	(0xff << 0)
 
 #define CPC_CL_VC_STOP_OFS	0x2020
 #define CPC_CL_VC_RUN_OFS	0x2028
@@ -271,12 +275,21 @@ LEAF(mips_cps_core_init)
  */
 LEAF(mips_cps_get_bootcfg)
 	/* Calculate a pointer to this cores struct core_boot_config */
+	PTR_LA	v0, mips_cps_cluster_bootcfg
+	PTR_L	v0, 0(v0)
 	lw	t0, GCR_CL_ID_OFS(s1)
+#ifdef CONFIG_CPU_MIPSR6
+	ext	t1, t0, CM3_GCR_Cx_ID_CLUSTER_SHF, 8
+	li	t2, CLUSTERBOOTCFG_SIZE
+	mul	t1, t1, t2
+	PTR_ADDU \
+		v0, v0, t1
+#endif
+	PTR_L	v0, CLUSTERBOOTCFG_CORECONFIG(v0)
+	andi	t0, t0, CM3_GCR_Cx_ID_CORENUM_MSK
 	li	t1, COREBOOTCFG_SIZE
 	mul	t0, t0, t1
-	PTR_LA	t1, mips_cps_core_bootcfg
-	PTR_L	t1, 0(t1)
-	PTR_ADDU v0, t0, t1
+	PTR_ADDU v0, v0, t0
 
 	/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
 	li	t9, 0
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index af7412549e6e..1e49e05ac8b1 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -9,6 +9,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/mmu_context.h>
 #include <linux/ptrace.h>
 #include <linux/smp.h>
 #include <linux/stddef.h>
@@ -37,6 +38,8 @@
 unsigned int elf_hwcap __read_mostly;
 EXPORT_SYMBOL_GPL(elf_hwcap);
 
+static bool mmid_disabled_quirk;
+
 static inline unsigned long cpu_get_msa_id(void)
 {
 	unsigned long status, msa_id;
@@ -645,7 +648,7 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c)
 	config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE);
 
 	if (cpu_has_mips_r6) {
-		if (!__builtin_constant_p(cpu_has_mmid) || cpu_has_mmid)
+		if (!mmid_disabled_quirk && (!__builtin_constant_p(cpu_has_mmid) || cpu_has_mmid))
 			config5 |= MIPS_CONF5_MI;
 		else
 			config5 &= ~MIPS_CONF5_MI;
@@ -708,7 +711,6 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c)
 					max_mmid_width);
 				asid_mask = GENMASK(max_mmid_width - 1, 0);
 			}
-
 			set_cpu_asid_mask(c, asid_mask);
 		}
 	}
@@ -1286,14 +1288,14 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		set_cpu_asid_mask(c, MIPS_ENTRYHI_ASID);
 		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		break;
-	case PRID_IMP_LOONGSON_32:  /* Loongson-1 */
+	case PRID_IMP_LOONGSON_32:
 		decode_configs(c);
 
 		c->cputype = CPU_LOONGSON32;
 
 		switch (c->processor_id & PRID_REV_MASK) {
-		case PRID_REV_LOONGSON1B:
-			__cpu_name[cpu] = "Loongson 1B";
+		case PRID_REV_LOONGSON1:
+			__cpu_name[cpu] = "ICT Loongson-1";
 			break;
 		}
 
@@ -2046,3 +2048,39 @@ void cpu_set_vpe_id(struct cpuinfo_mips *cpuinfo, unsigned int vpe)
 	cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_VP;
 	cpuinfo->globalnumber |= vpe << MIPS_GLOBALNUMBER_VP_SHF;
 }
+
+void cpu_disable_mmid(void)
+{
+	int i;
+	unsigned long asid_mask;
+	unsigned int cpu = smp_processor_id();
+	struct cpuinfo_mips *c = &current_cpu_data;
+	unsigned int config4 = read_c0_config4();
+	unsigned int config5 =  read_c0_config5();
+
+	/* Setup the initial ASID mask based on config4 */
+	asid_mask = MIPS_ENTRYHI_ASID;
+	if (config4 & MIPS_CONF4_AE)
+		asid_mask |= MIPS_ENTRYHI_ASIDX;
+	set_cpu_asid_mask(c, asid_mask);
+
+	/* Disable MMID in the C0 and update cpuinfo_mips accordingly */
+	config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE);
+	config5 &= ~MIPS_CONF5_MI;
+	write_c0_config5(config5);
+	/* Ensure the write to config5 above takes effect */
+	back_to_back_c0_hazard();
+	c->options &= ~MIPS_CPU_MMID;
+
+	/* Setup asid cache value cleared in per_cpu_trap_init() */
+	cpu_data[cpu].asid_cache = asid_first_version(cpu);
+
+	/* Reinit context for each CPU */
+	for_each_possible_cpu(i)
+		set_cpu_context(i, &init_mm, 0);
+
+	/* Ensure that now MMID will be seen as disable */
+	mmid_disabled_quirk = true;
+
+	pr_info("MMID support disabled due to hardware support issue\n");
+}
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index 8c401e42301c..b15615b28569 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -54,10 +54,20 @@ static inline void ftrace_dyn_arch_init_insns(void)
 	u32 *buf;
 	unsigned int v1;
 
-	/* la v1, _mcount */
-	v1 = 3;
-	buf = (u32 *)&insn_la_mcount[0];
-	UASM_i_LA(&buf, v1, MCOUNT_ADDR);
+	/* If we are not in compat space, the number of generated
+	 * instructions will exceed the maximum expected limit of 2.
+	 * To prevent buffer overflow, we avoid generating them.
+	 * insn_la_mcount will not be used later in ftrace_make_call.
+	 */
+	if (uasm_in_compat_space_p(MCOUNT_ADDR)) {
+		/* la v1, _mcount */
+		v1 = 3;
+		buf = (u32 *)&insn_la_mcount[0];
+		UASM_i_LA(&buf, v1, MCOUNT_ADDR);
+	} else {
+		pr_warn("ftrace: mcount address beyond 32 bits is not supported (%lX)\n",
+			MCOUNT_ADDR);
+	}
 
 	/* jal (ftrace_caller + 8), jump over the first two instruction */
 	buf = (u32 *)&insn_jal_ftrace_caller;
@@ -189,6 +199,13 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	unsigned int new;
 	unsigned long ip = rec->ip;
 
+	/* When the code to patch does not belong to the kernel code
+	 * space, we must use insn_la_mcount. However, if MCOUNT_ADDR
+	 * is not in compat space, insn_la_mcount is not usable.
+	 */
+	if (!core_kernel_text(ip) && !uasm_in_compat_space_p(MCOUNT_ADDR))
+		return -EFAULT;
+
 	new = core_kernel_text(ip) ? insn_jal_ftrace_caller : insn_la_mcount[0];
 
 #ifdef CONFIG_64BIT
@@ -248,7 +265,7 @@ int ftrace_disable_ftrace_graph_caller(void)
 #define S_R_SP	(0xafb0 << 16)	/* s{d,w} R, offset(sp) */
 #define OFFSET_MASK	0xffff	/* stack offset range: 0 ~ PT_SIZE */
 
-unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
+static unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
 		old_parent_ra, unsigned long parent_ra_addr, unsigned long fp)
 {
 	unsigned long sp, ip, tmp;
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index a572ce36a24f..be1b049d856f 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -104,48 +104,59 @@ handle_vcei:
 
 	__FINIT
 
-	.align	5	/* 32 byte rollback region */
-LEAF(__r4k_wait)
-	.set	push
-	.set	noreorder
-	/* start of rollback region */
-	LONG_L	t0, TI_FLAGS($28)
-	nop
-	andi	t0, _TIF_NEED_RESCHED
-	bnez	t0, 1f
-	 nop
-	nop
-	nop
-#ifdef CONFIG_CPU_MICROMIPS
-	nop
-	nop
-	nop
-	nop
-#endif
+	.section .cpuidle.text,"ax"
+	/* Align to 32 bytes for the maximum idle interrupt region size. */
+	.align	5
+LEAF(r4k_wait)
+	/* Keep the ISA bit clear for calculations on local labels here. */
+0:	.fill	0
+	/* Start of idle interrupt region. */
+	local_irq_enable
+	/*
+	 * If an interrupt lands here, before going idle on the next
+	 * instruction, we must *NOT* go idle since the interrupt could
+	 * have set TIF_NEED_RESCHED or caused a timer to need resched.
+	 * Fall through -- see skipover_handler below -- and have the
+	 * idle loop take care of things.
+	 */
+1:	.fill	0
+	/* The R2 EI/EHB sequence takes 8 bytes, otherwise pad up.  */
+	.if	1b - 0b > 32
+	.error	"overlong idle interrupt region"
+	.elseif	1b - 0b > 8
+	.align	4
+	.endif
+2:	.fill	0
+	.equ	r4k_wait_idle_size, 2b - 0b
+	/* End of idle interrupt region; size has to be a power of 2. */
 	.set	MIPS_ISA_ARCH_LEVEL_RAW
+r4k_wait_insn:
 	wait
-	/* end of rollback region (the region size must be power of two) */
-1:
+r4k_wait_exit:
+	.set	mips0
+	local_irq_disable
 	jr	ra
-	 nop
-	.set	pop
-	END(__r4k_wait)
+	END(r4k_wait)
+	.previous
 
-	.macro	BUILD_ROLLBACK_PROLOGUE handler
-	FEXPORT(rollback_\handler)
+	.macro	BUILD_SKIPOVER_PROLOGUE handler
+	FEXPORT(skipover_\handler)
 	.set	push
 	.set	noat
 	MFC0	k0, CP0_EPC
-	PTR_LA	k1, __r4k_wait
-	ori	k0, 0x1f	/* 32 byte rollback region */
-	xori	k0, 0x1f
+	/* Subtract/add 2 to let the ISA bit propagate through the mask.  */
+	PTR_LA	k1, r4k_wait_insn - 2
+	ori	k0, r4k_wait_idle_size - 2
+	.set	noreorder
 	bne	k0, k1, \handler
+	 PTR_ADDIU	k0, r4k_wait_exit - r4k_wait_insn + 2
+	.set	reorder
 	MTC0	k0, CP0_EPC
 	.set pop
 	.endm
 
 	.align	5
-BUILD_ROLLBACK_PROLOGUE handle_int
+BUILD_SKIPOVER_PROLOGUE handle_int
 NESTED(handle_int, PT_SIZE, sp)
 	.cfi_signal_frame
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -265,7 +276,7 @@ NESTED(except_vec_ejtag_debug, 0, sp)
  * This prototype is copied to ebase + n*IntCtl.VS and patched
  * to invoke the handler
  */
-BUILD_ROLLBACK_PROLOGUE except_vec_vi
+BUILD_SKIPOVER_PROLOGUE except_vec_vi
 NESTED(except_vec_vi, 0, sp)
 	SAVE_SOME docfi=1
 	SAVE_AT docfi=1
diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c
index 8c083612df9d..96ac40d20c23 100644
--- a/arch/mips/kernel/gpio_txx9.c
+++ b/arch/mips/kernel/gpio_txx9.c
@@ -32,14 +32,16 @@ static void txx9_gpio_set_raw(unsigned int offset, int value)
 	__raw_writel(val, &txx9_pioptr->dout);
 }
 
-static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset,
-			  int value)
+static int txx9_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			 int value)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&txx9_gpio_lock, flags);
 	txx9_gpio_set_raw(offset, value);
 	mmiowb();
 	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
+
+	return 0;
 }
 
 static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset)
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index e3ff6179c99f..d99ed58b7043 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -60,6 +60,7 @@
 	.endm
 
 	__HEAD
+
 #ifndef CONFIG_NO_EXCEPT_FILL
 	/*
 	 * Reserved space for exception handlers.
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 5abc8b7340f8..80e8a04a642e 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -35,13 +35,6 @@ static void __cpuidle r3081_wait(void)
 	write_c0_conf(cfg | R30XX_CONF_HALT);
 }
 
-void __cpuidle r4k_wait(void)
-{
-	raw_local_irq_enable();
-	__r4k_wait();
-	raw_local_irq_disable();
-}
-
 /*
  * This variant is preferable as it allows testing need_resched and going to
  * sleep depending on the outcome atomically.  Unfortunately the "It is
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index 3eb2cfb893e1..7c9c5dc38823 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -5,15 +5,18 @@
  */
 
 #include <linux/errno.h>
+#include <linux/of.h>
 #include <linux/percpu.h>
 #include <linux/spinlock.h>
 
 #include <asm/mips-cps.h>
+#include <asm/smp-cps.h>
 #include <asm/mipsregs.h>
 
 void __iomem *mips_gcr_base;
 void __iomem *mips_cm_l2sync_base;
 int mips_cm_is64;
+bool mips_cm_is_l2_hci_broken;
 
 static char *cm2_tr[8] = {
 	"mem",	"gcr",	"gic",	"mmio",
@@ -237,6 +240,23 @@ static void mips_cm_probe_l2sync(void)
 	mips_cm_l2sync_base = ioremap(addr, MIPS_CM_L2SYNC_SIZE);
 }
 
+void mips_cm_update_property(void)
+{
+	struct device_node *cm_node;
+
+	cm_node = of_find_compatible_node(of_root, NULL, "mobileye,eyeq6-cm");
+	if (!cm_node)
+		return;
+	pr_info("HCI (Hardware Cache Init for the L2 cache) in GCR_L2_RAM_CONFIG from the CM3 is broken");
+	mips_cm_is_l2_hci_broken = true;
+
+	/* Disable MMID only if it was configured */
+	if (cpu_has_mmid)
+		cpu_disable_mmid();
+
+	of_node_put(cm_node);
+}
+
 int mips_cm_probe(void)
 {
 	phys_addr_t addr;
@@ -308,7 +328,9 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
 		      FIELD_PREP(CM3_GCR_Cx_OTHER_VP, vp);
 
 		if (cm_rev >= CM_REV_CM3_5) {
-			val |= CM_GCR_Cx_OTHER_CLUSTER_EN;
+			if (cluster != cpu_cluster(&current_cpu_data))
+				val |= CM_GCR_Cx_OTHER_CLUSTER_EN;
+			val |= CM_GCR_Cx_OTHER_GIC_EN;
 			val |= FIELD_PREP(CM_GCR_Cx_OTHER_CLUSTER, cluster);
 			val |= FIELD_PREP(CM_GCR_Cx_OTHER_BLOCK, block);
 		} else {
@@ -513,39 +535,23 @@ void mips_cm_error_report(void)
 	write_gcr_error_cause(cm_error);
 }
 
-unsigned int mips_cps_first_online_in_cluster(void)
+unsigned int mips_cps_first_online_in_cluster(int *first_cpu)
 {
-	unsigned int local_cl;
-	int i;
-
-	local_cl = cpu_cluster(&current_cpu_data);
+	unsigned int local_cl = cpu_cluster(&current_cpu_data);
+	struct cpumask *local_cl_mask;
 
 	/*
-	 * We rely upon knowledge that CPUs are numbered sequentially by
-	 * cluster - ie. CPUs 0..X will be in cluster 0, CPUs X+1..Y in cluster
-	 * 1, CPUs Y+1..Z in cluster 2 etc. This means that CPUs in the same
-	 * cluster will immediately precede or follow one another.
-	 *
-	 * First we scan backwards, until we find an online CPU in the cluster
-	 * or we move on to another cluster.
+	 * mips_cps_cluster_bootcfg is allocated in cps_prepare_cpus. If it is
+	 * not yet done, then we are so early that only one CPU is running, so
+	 * it is the first online CPU in the cluster.
 	 */
-	for (i = smp_processor_id() - 1; i >= 0; i--) {
-		if (cpu_cluster(&cpu_data[i]) != local_cl)
-			break;
-		if (!cpu_online(i))
-			continue;
-		return false;
-	}
-
-	/* Then do the same for higher numbered CPUs */
-	for (i = smp_processor_id() + 1; i < nr_cpu_ids; i++) {
-		if (cpu_cluster(&cpu_data[i]) != local_cl)
-			break;
-		if (!cpu_online(i))
-			continue;
-		return false;
-	}
-
-	/* We found no online CPUs in the local cluster */
-	return true;
+	if  (IS_ENABLED(CONFIG_MIPS_CPS) && mips_cps_cluster_bootcfg)
+		local_cl_mask = &mips_cps_cluster_bootcfg[local_cl].cpumask;
+	else
+		return true;
+
+	*first_cpu = cpumask_any_and_but(local_cl_mask,
+					 cpu_online_mask,
+					 smp_processor_id());
+	return (*first_cpu >= nr_cpu_ids);
 }
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 37676a44fefb..2ef610650a9e 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -122,9 +122,8 @@ void mips_mt_set_cpuoptions(void)
 		unsigned long ectlval;
 		unsigned long itcblkgrn;
 
-		/* ErrCtl register is known as "ecc" to Linux */
-		ectlval = read_c0_ecc();
-		write_c0_ecc(ectlval | (0x1 << 26));
+		ectlval = read_c0_errctl();
+		write_c0_errctl(ectlval | (0x1 << 26));
 		ehb();
 #define INDEX_0 (0x80000000)
 #define INDEX_8 (0x80000008)
@@ -145,7 +144,7 @@ void mips_mt_set_cpuoptions(void)
 		ehb();
 		/* Write out to ITU with CACHE op */
 		cache_op(Index_Store_Tag_D, INDEX_0);
-		write_c0_ecc(ectlval);
+		write_c0_errctl(ectlval);
 		ehb();
 		printk("Mapped %ld ITC cells starting at 0x%08x\n",
 			((itcblkgrn & 0x7fe00000) >> 20), itc_base);
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index c4d6b09136b1..196a070349b0 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -791,8 +791,7 @@ static void handle_associated_event(struct cpu_hw_events *cpuc,
 	if (!mipspmu_event_set_period(event, hwc, idx))
 		return;
 
-	if (perf_event_overflow(event, data, regs))
-		mipsxx_pmu_disable_event(idx);
+	perf_event_overflow(event, data, regs);
 }
 
 
diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c
index d09ca77e624d..3de0e05e0511 100644
--- a/arch/mips/kernel/pm-cps.c
+++ b/arch/mips/kernel/pm-cps.c
@@ -57,10 +57,7 @@ static DEFINE_PER_CPU_ALIGNED(u32*, ready_count);
 /* Indicates online CPUs coupled with the current CPU */
 static DEFINE_PER_CPU_ALIGNED(cpumask_t, online_coupled);
 
-/*
- * Used to synchronize entry to deep idle states. Actually per-core rather
- * than per-CPU.
- */
+/* Used to synchronize entry to deep idle states */
 static DEFINE_PER_CPU_ALIGNED(atomic_t, pm_barrier);
 
 /* Saved CPU state across the CPS_PM_POWER_GATED state */
@@ -104,17 +101,20 @@ static void coupled_barrier(atomic_t *a, unsigned online)
 int cps_pm_enter_state(enum cps_pm_state state)
 {
 	unsigned cpu = smp_processor_id();
+	unsigned int cluster = cpu_cluster(&current_cpu_data);
 	unsigned core = cpu_core(&current_cpu_data);
 	unsigned online, left;
 	cpumask_t *coupled_mask = this_cpu_ptr(&online_coupled);
 	u32 *core_ready_count, *nc_core_ready_count;
 	void *nc_addr;
 	cps_nc_entry_fn entry;
+	struct cluster_boot_config *cluster_cfg;
 	struct core_boot_config *core_cfg;
 	struct vpe_boot_config *vpe_cfg;
+	atomic_t *barrier;
 
 	/* Check that there is an entry function for this state */
-	entry = per_cpu(nc_asm_enter, core)[state];
+	entry = per_cpu(nc_asm_enter, cpu)[state];
 	if (!entry)
 		return -EINVAL;
 
@@ -138,7 +138,8 @@ int cps_pm_enter_state(enum cps_pm_state state)
 		if (!mips_cps_smp_in_use())
 			return -EINVAL;
 
-		core_cfg = &mips_cps_core_bootcfg[core];
+		cluster_cfg = &mips_cps_cluster_bootcfg[cluster];
+		core_cfg = &cluster_cfg->core_config[core];
 		vpe_cfg = &core_cfg->vpe_config[cpu_vpe_id(&current_cpu_data)];
 		vpe_cfg->pc = (unsigned long)mips_cps_pm_restore;
 		vpe_cfg->gp = (unsigned long)current_thread_info();
@@ -150,7 +151,7 @@ int cps_pm_enter_state(enum cps_pm_state state)
 	smp_mb__after_atomic();
 
 	/* Create a non-coherent mapping of the core ready_count */
-	core_ready_count = per_cpu(ready_count, core);
+	core_ready_count = per_cpu(ready_count, cpu);
 	nc_addr = kmap_noncoherent(virt_to_page(core_ready_count),
 				   (unsigned long)core_ready_count);
 	nc_addr += ((unsigned long)core_ready_count & ~PAGE_MASK);
@@ -158,7 +159,8 @@ int cps_pm_enter_state(enum cps_pm_state state)
 
 	/* Ensure ready_count is zero-initialised before the assembly runs */
 	WRITE_ONCE(*nc_core_ready_count, 0);
-	coupled_barrier(&per_cpu(pm_barrier, core), online);
+	barrier = &per_cpu(pm_barrier, cpumask_first(&cpu_sibling_map[cpu]));
+	coupled_barrier(barrier, online);
 
 	/* Run the generated entry code */
 	left = entry(online, nc_core_ready_count);
@@ -629,12 +631,14 @@ out_err:
 
 static int cps_pm_online_cpu(unsigned int cpu)
 {
-	enum cps_pm_state state;
-	unsigned core = cpu_core(&cpu_data[cpu]);
+	unsigned int sibling, core;
 	void *entry_fn, *core_rc;
+	enum cps_pm_state state;
+
+	core = cpu_core(&cpu_data[cpu]);
 
 	for (state = CPS_PM_NC_WAIT; state < CPS_PM_STATE_COUNT; state++) {
-		if (per_cpu(nc_asm_enter, core)[state])
+		if (per_cpu(nc_asm_enter, cpu)[state])
 			continue;
 		if (!test_bit(state, state_support))
 			continue;
@@ -646,16 +650,19 @@ static int cps_pm_online_cpu(unsigned int cpu)
 			clear_bit(state, state_support);
 		}
 
-		per_cpu(nc_asm_enter, core)[state] = entry_fn;
+		for_each_cpu(sibling, &cpu_sibling_map[cpu])
+			per_cpu(nc_asm_enter, sibling)[state] = entry_fn;
 	}
 
-	if (!per_cpu(ready_count, core)) {
+	if (!per_cpu(ready_count, cpu)) {
 		core_rc = kmalloc(sizeof(u32), GFP_KERNEL);
 		if (!core_rc) {
 			pr_err("Failed allocate core %u ready_count\n", core);
 			return -ENOMEM;
 		}
-		per_cpu(ready_count, core) = core_rc;
+
+		for_each_cpu(sibling, &cpu_sibling_map[cpu])
+			per_cpu(ready_count, sibling) = core_rc;
 	}
 
 	return 0;
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index b630604c577f..a3101f2268c6 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -107,7 +107,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct thread_info *ti = task_thread_info(p);
@@ -690,18 +690,20 @@ unsigned long mips_stack_top(void)
 	}
 
 	/* Space for the VDSO, data page & GIC user page */
-	top -= PAGE_ALIGN(current->thread.abi->vdso->size);
-	top -= PAGE_SIZE;
-	top -= mips_gic_present() ? PAGE_SIZE : 0;
+	if (current->thread.abi) {
+		top -= PAGE_ALIGN(current->thread.abi->vdso->size);
+		top -= VDSO_NR_PAGES * PAGE_SIZE;
+		top -= mips_gic_present() ? PAGE_SIZE : 0;
+
+		/* Space to randomize the VDSO base */
+		if (current->flags & PF_RANDOMIZE)
+			top -= VDSO_RANDOMIZE_SIZE;
+	}
 
 	/* Space for cache colour alignment */
 	if (cpu_has_dc_aliases)
 		top -= shm_align_mask + 1;
 
-	/* Space to randomize the VDSO base */
-	if (current->flags & PF_RANDOMIZE)
-		top -= VDSO_RANDOMIZE_SIZE;
-
 	return top;
 }
 
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 61503a36067e..3f4c94c88124 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -922,58 +922,60 @@ static const struct pt_regs_offset regoffset_table[] = {
  */
 int regs_query_register_offset(const char *name)
 {
-        const struct pt_regs_offset *roff;
-        for (roff = regoffset_table; roff->name != NULL; roff++)
-                if (!strcmp(roff->name, name))
-                        return roff->offset;
-        return -EINVAL;
+	const struct pt_regs_offset *roff;
+
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+
+	return -EINVAL;
 }
 
 #if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32)
 
 static const struct user_regset mips_regsets[] = {
 	[REGSET_GPR] = {
-		.core_note_type	= NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n		= ELF_NGREG,
 		.size		= sizeof(unsigned int),
 		.align		= sizeof(unsigned int),
-		.regset_get		= gpr32_get,
+		.regset_get	= gpr32_get,
 		.set		= gpr32_set,
 	},
 	[REGSET_DSP] = {
-		.core_note_type	= NT_MIPS_DSP,
+		USER_REGSET_NOTE_TYPE(MIPS_DSP),
 		.n		= NUM_DSP_REGS + 1,
 		.size		= sizeof(u32),
 		.align		= sizeof(u32),
-		.regset_get		= dsp32_get,
+		.regset_get	= dsp32_get,
 		.set		= dsp32_set,
 		.active		= dsp_active,
 	},
 #ifdef CONFIG_MIPS_FP_SUPPORT
 	[REGSET_FPR] = {
-		.core_note_type	= NT_PRFPREG,
+		USER_REGSET_NOTE_TYPE(PRFPREG),
 		.n		= ELF_NFPREG,
 		.size		= sizeof(elf_fpreg_t),
 		.align		= sizeof(elf_fpreg_t),
-		.regset_get		= fpr_get,
+		.regset_get	= fpr_get,
 		.set		= fpr_set,
 	},
 	[REGSET_FP_MODE] = {
-		.core_note_type	= NT_MIPS_FP_MODE,
+		USER_REGSET_NOTE_TYPE(MIPS_FP_MODE),
 		.n		= 1,
 		.size		= sizeof(int),
 		.align		= sizeof(int),
-		.regset_get		= fp_mode_get,
+		.regset_get	= fp_mode_get,
 		.set		= fp_mode_set,
 	},
 #endif
 #ifdef CONFIG_CPU_HAS_MSA
 	[REGSET_MSA] = {
-		.core_note_type	= NT_MIPS_MSA,
+		USER_REGSET_NOTE_TYPE(MIPS_MSA),
 		.n		= NUM_FPU_REGS + 1,
 		.size		= 16,
 		.align		= 16,
-		.regset_get		= msa_get,
+		.regset_get	= msa_get,
 		.set		= msa_set,
 	},
 #endif
@@ -993,47 +995,47 @@ static const struct user_regset_view user_mips_view = {
 
 static const struct user_regset mips64_regsets[] = {
 	[REGSET_GPR] = {
-		.core_note_type	= NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n		= ELF_NGREG,
 		.size		= sizeof(unsigned long),
 		.align		= sizeof(unsigned long),
-		.regset_get		= gpr64_get,
+		.regset_get	= gpr64_get,
 		.set		= gpr64_set,
 	},
 	[REGSET_DSP] = {
-		.core_note_type	= NT_MIPS_DSP,
+		USER_REGSET_NOTE_TYPE(MIPS_DSP),
 		.n		= NUM_DSP_REGS + 1,
 		.size		= sizeof(u64),
 		.align		= sizeof(u64),
-		.regset_get		= dsp64_get,
+		.regset_get	= dsp64_get,
 		.set		= dsp64_set,
 		.active		= dsp_active,
 	},
 #ifdef CONFIG_MIPS_FP_SUPPORT
 	[REGSET_FP_MODE] = {
-		.core_note_type	= NT_MIPS_FP_MODE,
+		USER_REGSET_NOTE_TYPE(MIPS_FP_MODE),
 		.n		= 1,
 		.size		= sizeof(int),
 		.align		= sizeof(int),
-		.regset_get		= fp_mode_get,
+		.regset_get	= fp_mode_get,
 		.set		= fp_mode_set,
 	},
 	[REGSET_FPR] = {
-		.core_note_type	= NT_PRFPREG,
+		USER_REGSET_NOTE_TYPE(PRFPREG),
 		.n		= ELF_NFPREG,
 		.size		= sizeof(elf_fpreg_t),
 		.align		= sizeof(elf_fpreg_t),
-		.regset_get		= fpr_get,
+		.regset_get	= fpr_get,
 		.set		= fpr_set,
 	},
 #endif
 #ifdef CONFIG_CPU_HAS_MSA
 	[REGSET_MSA] = {
-		.core_note_type	= NT_MIPS_MSA,
+		USER_REGSET_NOTE_TYPE(MIPS_MSA),
 		.n		= NUM_FPU_REGS + 1,
 		.size		= 16,
 		.align		= 16,
-		.regset_get		= msa_get,
+		.regset_get	= msa_get,
 		.set		= msa_set,
 	},
 #endif
@@ -1326,24 +1328,8 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs)
 			return -1;
 	}
 
-#ifdef CONFIG_SECCOMP
-	if (unlikely(test_thread_flag(TIF_SECCOMP))) {
-		int ret, i;
-		struct seccomp_data sd;
-		unsigned long args[6];
-
-		sd.nr = current_thread_info()->syscall;
-		sd.arch = syscall_get_arch(current);
-		syscall_get_arguments(current, regs, args);
-		for (i = 0; i < 6; i++)
-			sd.args[i] = args[i];
-		sd.instruction_pointer = KSTK_EIP(current);
-
-		ret = __secure_computing(&sd);
-		if (ret == -1)
-			return ret;
-	}
-#endif
+	if (secure_computing())
+		return -1;
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_sys_enter(regs, regs->regs[2]);
@@ -1367,7 +1353,7 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs)
  */
 asmlinkage void syscall_trace_leave(struct pt_regs *regs)
 {
-        /*
+	/*
 	 * We may come here right after calling schedule_user()
 	 * or do_notify_resume(), in which case we can be in RCU
 	 * user mode.
diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c
index cda7983e7c18..7f1c136ad850 100644
--- a/arch/mips/kernel/relocate.c
+++ b/arch/mips/kernel/relocate.c
@@ -138,7 +138,7 @@ static int __init reloc_handler(u32 type, u32 *loc_orig, u32 *loc_new,
 		apply_r_mips_hi16_rel(loc_orig, loc_new, offset);
 		break;
 	default:
-		pr_err("Unhandled relocation type %d at 0x%pK\n", type,
+		pr_err("Unhandled relocation type %d at 0x%p\n", type,
 		       loc_orig);
 		return -ENOEXEC;
 	}
@@ -439,10 +439,10 @@ static void show_kernel_relocation(const char *level)
 {
 	if (__kaslr_offset > 0) {
 		printk(level);
-		pr_cont("Kernel relocated by 0x%pK\n", (void *)__kaslr_offset);
-		pr_cont(" .text @ 0x%pK\n", _text);
-		pr_cont(" .data @ 0x%pK\n", _sdata);
-		pr_cont(" .bss  @ 0x%pK\n", __bss_start);
+		pr_cont("Kernel relocated by 0x%p\n", (void *)__kaslr_offset);
+		pr_cont(" .text @ 0x%p\n", _text);
+		pr_cont(" .data @ 0x%p\n", _sdata);
+		pr_cont(" .bss  @ 0x%p\n", __bss_start);
 	}
 }
 
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 2c604717e630..4947a4f39e37 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -64,10 +64,10 @@ load_a6: user_lw(t7, 24(t0))		# argument #7 from usp
 load_a7: user_lw(t8, 28(t0))		# argument #8 from usp
 loads_done:
 
-	sw	t5, 16(sp)		# argument #5 to ksp
-	sw	t6, 20(sp)		# argument #6 to ksp
-	sw	t7, 24(sp)		# argument #7 to ksp
-	sw	t8, 28(sp)		# argument #8 to ksp
+	sw	t5, PT_ARG4(sp)		# argument #5 to ksp
+	sw	t6, PT_ARG5(sp)		# argument #6 to ksp
+	sw	t7, PT_ARG6(sp)		# argument #7 to ksp
+	sw	t8, PT_ARG7(sp)		# argument #8 to ksp
 	.set	pop
 
 	.section __ex_table,"a"
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 12a1a4ffb602..11b9b6b63e19 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -458,7 +458,7 @@ static void __init mips_parse_crashkernel(void)
 	total_mem = memblock_phys_mem_size();
 	ret = parse_crashkernel(boot_command_line, total_mem,
 				&crash_size, &crash_base,
-				NULL, NULL);
+				NULL, NULL, NULL);
 	if (ret != 0 || crash_size <= 0)
 		return;
 
@@ -704,10 +704,7 @@ static void __init resource_init(void)
 	for_each_mem_range(i, &start, &end) {
 		struct resource *res;
 
-		res = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-		if (!res)
-			panic("%s: Failed to allocate %zu bytes\n", __func__,
-			      sizeof(struct resource));
+		res = memblock_alloc_or_panic(sizeof(struct resource), SMP_CACHE_BYTES);
 
 		res->start = start;
 		/*
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index 82c8f9b9573c..22d4f9ff3ae2 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -36,11 +36,55 @@ enum label_id {
 
 UASM_L_LA(_not_nmi)
 
-static DECLARE_BITMAP(core_power, NR_CPUS);
 static u64 core_entry_reg;
 static phys_addr_t cps_vec_pa;
 
-struct core_boot_config *mips_cps_core_bootcfg;
+struct cluster_boot_config *mips_cps_cluster_bootcfg;
+
+static void power_up_other_cluster(unsigned int cluster)
+{
+	u32 stat, seq_state;
+	unsigned int timeout;
+
+	mips_cm_lock_other(cluster, CM_GCR_Cx_OTHER_CORE_CM, 0,
+			   CM_GCR_Cx_OTHER_BLOCK_LOCAL);
+	stat = read_cpc_co_stat_conf();
+	mips_cm_unlock_other();
+
+	seq_state = stat & CPC_Cx_STAT_CONF_SEQSTATE;
+	seq_state >>= __ffs(CPC_Cx_STAT_CONF_SEQSTATE);
+	if (seq_state == CPC_Cx_STAT_CONF_SEQSTATE_U5)
+		return;
+
+	/* Set endianness & power up the CM */
+	mips_cm_lock_other(cluster, 0, 0, CM_GCR_Cx_OTHER_BLOCK_GLOBAL);
+	write_cpc_redir_sys_config(IS_ENABLED(CONFIG_CPU_BIG_ENDIAN));
+	write_cpc_redir_pwrup_ctl(1);
+	mips_cm_unlock_other();
+
+	/* Wait for the CM to start up */
+	timeout = 1000;
+	mips_cm_lock_other(cluster, CM_GCR_Cx_OTHER_CORE_CM, 0,
+			   CM_GCR_Cx_OTHER_BLOCK_LOCAL);
+	while (1) {
+		stat = read_cpc_co_stat_conf();
+		seq_state = stat & CPC_Cx_STAT_CONF_SEQSTATE;
+		seq_state >>= __ffs(CPC_Cx_STAT_CONF_SEQSTATE);
+		if (seq_state == CPC_Cx_STAT_CONF_SEQSTATE_U5)
+			break;
+
+		if (timeout) {
+			mdelay(1);
+			timeout--;
+		} else {
+			pr_warn("Waiting for cluster %u CM to power up... STAT_CONF=0x%x\n",
+				cluster, stat);
+			mdelay(1000);
+		}
+	}
+
+	mips_cm_unlock_other();
+}
 
 static unsigned __init core_vpe_count(unsigned int cluster, unsigned core)
 {
@@ -178,6 +222,9 @@ static void __init cps_smp_setup(void)
 			pr_cont(",");
 		pr_cont("{");
 
+		if (mips_cm_revision() >= CM_REV_CM3_5)
+			power_up_other_cluster(cl);
+
 		ncores = mips_cps_numcores(cl);
 		for (c = 0; c < ncores; c++) {
 			core_vpes = core_vpe_count(cl, c);
@@ -189,6 +236,7 @@ static void __init cps_smp_setup(void)
 			/* Use the number of VPEs in cluster 0 core 0 for smp_num_siblings */
 			if (!cl && !c)
 				smp_num_siblings = core_vpes;
+			cpumask_set_cpu(nvpes, &__cpu_primary_thread_mask);
 
 			for (v = 0; v < min_t(int, core_vpes, NR_CPUS - nvpes); v++) {
 				cpu_set_cluster(&cpu_data[nvpes + v], cl);
@@ -205,8 +253,8 @@ static void __init cps_smp_setup(void)
 
 	/* Indicate present CPUs (CPU being synonymous with VPE) */
 	for (v = 0; v < min_t(unsigned, nvpes, NR_CPUS); v++) {
-		set_cpu_possible(v, cpu_cluster(&cpu_data[v]) == 0);
-		set_cpu_present(v, cpu_cluster(&cpu_data[v]) == 0);
+		set_cpu_possible(v, true);
+		set_cpu_present(v, true);
 		__cpu_number_map[v] = v;
 		__cpu_logical_map[v] = v;
 	}
@@ -214,9 +262,6 @@ static void __init cps_smp_setup(void)
 	/* Set a coherent default CCA (CWB) */
 	change_c0_config(CONF_CM_CMASK, 0x5);
 
-	/* Core 0 is powered up (we're running on it) */
-	bitmap_set(core_power, 0, 1);
-
 	/* Initialise core 0 */
 	mips_cps_core_init();
 
@@ -236,10 +281,23 @@ static void __init cps_smp_setup(void)
 #endif /* CONFIG_MIPS_MT_FPAFF */
 }
 
+unsigned long calibrate_delay_is_known(void)
+{
+	int first_cpu_cluster = 0;
+
+	/* The calibration has to be done on the primary CPU of the cluster */
+	if (mips_cps_first_online_in_cluster(&first_cpu_cluster))
+		return 0;
+
+	return cpu_data[first_cpu_cluster].udelay_val;
+}
+
 static void __init cps_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned ncores, core_vpes, c, cca;
+	unsigned int nclusters, ncores, core_vpes, nvpe = 0, c, cl, cca;
 	bool cca_unsuitable, cores_limited;
+	struct cluster_boot_config *cluster_bootcfg;
+	struct core_boot_config *core_bootcfg;
 
 	mips_mt_set_cpuoptions();
 
@@ -281,40 +339,70 @@ static void __init cps_prepare_cpus(unsigned int max_cpus)
 
 	setup_cps_vecs();
 
-	/* Allocate core boot configuration structs */
-	ncores = mips_cps_numcores(0);
-	mips_cps_core_bootcfg = kcalloc(ncores, sizeof(*mips_cps_core_bootcfg),
-					GFP_KERNEL);
-	if (!mips_cps_core_bootcfg) {
-		pr_err("Failed to allocate boot config for %u cores\n", ncores);
+	/* Allocate cluster boot configuration structs */
+	nclusters = mips_cps_numclusters();
+	mips_cps_cluster_bootcfg = kcalloc(nclusters,
+					   sizeof(*mips_cps_cluster_bootcfg),
+					   GFP_KERNEL);
+	if (!mips_cps_cluster_bootcfg)
 		goto err_out;
-	}
 
-	/* Allocate VPE boot configuration structs */
-	for (c = 0; c < ncores; c++) {
-		core_vpes = core_vpe_count(0, c);
-		mips_cps_core_bootcfg[c].vpe_config = kcalloc(core_vpes,
-				sizeof(*mips_cps_core_bootcfg[c].vpe_config),
+	if (nclusters > 1)
+		mips_cm_update_property();
+
+	for (cl = 0; cl < nclusters; cl++) {
+		/* Allocate core boot configuration structs */
+		ncores = mips_cps_numcores(cl);
+		core_bootcfg = kcalloc(ncores, sizeof(*core_bootcfg),
+					GFP_KERNEL);
+		if (!core_bootcfg)
+			goto err_out;
+		mips_cps_cluster_bootcfg[cl].core_config = core_bootcfg;
+
+		mips_cps_cluster_bootcfg[cl].core_power =
+			kcalloc(BITS_TO_LONGS(ncores), sizeof(unsigned long),
 				GFP_KERNEL);
-		if (!mips_cps_core_bootcfg[c].vpe_config) {
-			pr_err("Failed to allocate %u VPE boot configs\n",
-			       core_vpes);
+		if (!mips_cps_cluster_bootcfg[cl].core_power)
 			goto err_out;
+
+		/* Allocate VPE boot configuration structs */
+		for (c = 0; c < ncores; c++) {
+			int v;
+			core_vpes = core_vpe_count(cl, c);
+			core_bootcfg[c].vpe_config = kcalloc(core_vpes,
+					sizeof(*core_bootcfg[c].vpe_config),
+					GFP_KERNEL);
+			for (v = 0; v < core_vpes; v++)
+				cpumask_set_cpu(nvpe++, &mips_cps_cluster_bootcfg[cl].cpumask);
+			if (!core_bootcfg[c].vpe_config)
+				goto err_out;
 		}
 	}
 
-	/* Mark this CPU as booted */
-	atomic_set(&mips_cps_core_bootcfg[cpu_core(&current_cpu_data)].vpe_mask,
-		   1 << cpu_vpe_id(&current_cpu_data));
+	/* Mark this CPU as powered up & booted */
+	cl = cpu_cluster(&current_cpu_data);
+	c = cpu_core(&current_cpu_data);
+	cluster_bootcfg = &mips_cps_cluster_bootcfg[cl];
+	cpu_smt_set_num_threads(core_vpes, core_vpes);
+	core_bootcfg = &cluster_bootcfg->core_config[c];
+	bitmap_set(cluster_bootcfg->core_power, cpu_core(&current_cpu_data), 1);
+	atomic_set(&core_bootcfg->vpe_mask, 1 << cpu_vpe_id(&current_cpu_data));
 
 	return;
 err_out:
 	/* Clean up allocations */
-	if (mips_cps_core_bootcfg) {
-		for (c = 0; c < ncores; c++)
-			kfree(mips_cps_core_bootcfg[c].vpe_config);
-		kfree(mips_cps_core_bootcfg);
-		mips_cps_core_bootcfg = NULL;
+	if (mips_cps_cluster_bootcfg) {
+		for (cl = 0; cl < nclusters; cl++) {
+			cluster_bootcfg = &mips_cps_cluster_bootcfg[cl];
+			ncores = mips_cps_numcores(cl);
+			for (c = 0; c < ncores; c++) {
+				core_bootcfg = &cluster_bootcfg->core_config[c];
+				kfree(core_bootcfg->vpe_config);
+			}
+			kfree(mips_cps_cluster_bootcfg[c].core_config);
+		}
+		kfree(mips_cps_cluster_bootcfg);
+		mips_cps_cluster_bootcfg = NULL;
 	}
 
 	/* Effectively disable SMP by declaring CPUs not present */
@@ -325,13 +413,118 @@ err_out:
 	}
 }
 
-static void boot_core(unsigned int core, unsigned int vpe_id)
+static void init_cluster_l2(void)
 {
-	u32 stat, seq_state;
-	unsigned timeout;
+	u32 l2_cfg, l2sm_cop, result;
+
+	while (!mips_cm_is_l2_hci_broken) {
+		l2_cfg = read_gcr_redir_l2_ram_config();
+
+		/* If HCI is not supported, use the state machine below */
+		if (!(l2_cfg & CM_GCR_L2_RAM_CONFIG_PRESENT))
+			break;
+		if (!(l2_cfg & CM_GCR_L2_RAM_CONFIG_HCI_SUPPORTED))
+			break;
+
+		/* If the HCI_DONE bit is set, we're finished */
+		if (l2_cfg & CM_GCR_L2_RAM_CONFIG_HCI_DONE)
+			return;
+	}
+
+	l2sm_cop = read_gcr_redir_l2sm_cop();
+	if (WARN(!(l2sm_cop & CM_GCR_L2SM_COP_PRESENT),
+		 "L2 init not supported on this system yet"))
+		return;
+
+	/* Clear L2 tag registers */
+	write_gcr_redir_l2_tag_state(0);
+	write_gcr_redir_l2_ecc(0);
+
+	/* Ensure the L2 tag writes complete before the state machine starts */
+	mb();
+
+	/* Wait for the L2 state machine to be idle */
+	do {
+		l2sm_cop = read_gcr_redir_l2sm_cop();
+	} while (l2sm_cop & CM_GCR_L2SM_COP_RUNNING);
+
+	/* Start a store tag operation */
+	l2sm_cop = CM_GCR_L2SM_COP_TYPE_IDX_STORETAG;
+	l2sm_cop <<= __ffs(CM_GCR_L2SM_COP_TYPE);
+	l2sm_cop |= CM_GCR_L2SM_COP_CMD_START;
+	write_gcr_redir_l2sm_cop(l2sm_cop);
+
+	/* Ensure the state machine starts before we poll for completion */
+	mb();
+
+	/* Wait for the operation to be complete */
+	do {
+		l2sm_cop = read_gcr_redir_l2sm_cop();
+		result = l2sm_cop & CM_GCR_L2SM_COP_RESULT;
+		result >>= __ffs(CM_GCR_L2SM_COP_RESULT);
+	} while (!result);
+
+	WARN(result != CM_GCR_L2SM_COP_RESULT_DONE_OK,
+	     "L2 state machine failed cache init with error %u\n", result);
+}
+
+static void boot_core(unsigned int cluster, unsigned int core,
+		      unsigned int vpe_id)
+{
+	struct cluster_boot_config *cluster_cfg;
+	u32 access, stat, seq_state;
+	unsigned int timeout, ncores;
+
+	cluster_cfg = &mips_cps_cluster_bootcfg[cluster];
+	ncores = mips_cps_numcores(cluster);
+
+	if ((cluster != cpu_cluster(&current_cpu_data)) &&
+	    bitmap_empty(cluster_cfg->core_power, ncores)) {
+		power_up_other_cluster(cluster);
+
+		mips_cm_lock_other(cluster, core, 0,
+				   CM_GCR_Cx_OTHER_BLOCK_GLOBAL);
+
+		/* Ensure cluster GCRs are where we expect */
+		write_gcr_redir_base(read_gcr_base());
+		write_gcr_redir_cpc_base(read_gcr_cpc_base());
+		write_gcr_redir_gic_base(read_gcr_gic_base());
+
+		init_cluster_l2();
+
+		/* Mirror L2 configuration */
+		write_gcr_redir_l2_only_sync_base(read_gcr_l2_only_sync_base());
+		write_gcr_redir_l2_pft_control(read_gcr_l2_pft_control());
+		write_gcr_redir_l2_pft_control_b(read_gcr_l2_pft_control_b());
+
+		/* Mirror ECC/parity setup */
+		write_gcr_redir_err_control(read_gcr_err_control());
+
+		/* Set BEV base */
+		write_gcr_redir_bev_base(core_entry_reg);
+
+		mips_cm_unlock_other();
+	}
+
+	if (cluster != cpu_cluster(&current_cpu_data)) {
+		mips_cm_lock_other(cluster, core, 0,
+				   CM_GCR_Cx_OTHER_BLOCK_GLOBAL);
+
+		/* Ensure the core can access the GCRs */
+		access = read_gcr_redir_access();
+		access |= BIT(core);
+		write_gcr_redir_access(access);
+
+		mips_cm_unlock_other();
+	} else {
+		/* Ensure the core can access the GCRs */
+		access = read_gcr_access();
+		access |= BIT(core);
+		write_gcr_access(access);
+	}
 
 	/* Select the appropriate core */
-	mips_cm_lock_other(0, core, 0, CM_GCR_Cx_OTHER_BLOCK_LOCAL);
+	mips_cm_lock_other(cluster, core, 0, CM_GCR_Cx_OTHER_BLOCK_LOCAL);
 
 	/* Set its reset vector */
 	if (mips_cm_is64)
@@ -400,30 +593,42 @@ static void boot_core(unsigned int core, unsigned int vpe_id)
 	mips_cm_unlock_other();
 
 	/* The core is now powered up */
-	bitmap_set(core_power, core, 1);
+	bitmap_set(cluster_cfg->core_power, core, 1);
+
+	/*
+	 * Restore CM_PWRUP=0 so that the CM can power down if all the cores in
+	 * the cluster do (eg. if they're all removed via hotplug.
+	 */
+	if (mips_cm_revision() >= CM_REV_CM3_5) {
+		mips_cm_lock_other(cluster, 0, 0, CM_GCR_Cx_OTHER_BLOCK_GLOBAL);
+		write_cpc_redir_pwrup_ctl(0);
+		mips_cm_unlock_other();
+	}
 }
 
 static void remote_vpe_boot(void *dummy)
 {
+	unsigned int cluster = cpu_cluster(&current_cpu_data);
 	unsigned core = cpu_core(&current_cpu_data);
-	struct core_boot_config *core_cfg = &mips_cps_core_bootcfg[core];
+	struct cluster_boot_config *cluster_cfg =
+		&mips_cps_cluster_bootcfg[cluster];
+	struct core_boot_config *core_cfg = &cluster_cfg->core_config[core];
 
 	mips_cps_boot_vpes(core_cfg, cpu_vpe_id(&current_cpu_data));
 }
 
 static int cps_boot_secondary(int cpu, struct task_struct *idle)
 {
+	unsigned int cluster = cpu_cluster(&cpu_data[cpu]);
 	unsigned core = cpu_core(&cpu_data[cpu]);
 	unsigned vpe_id = cpu_vpe_id(&cpu_data[cpu]);
-	struct core_boot_config *core_cfg = &mips_cps_core_bootcfg[core];
+	struct cluster_boot_config *cluster_cfg =
+		&mips_cps_cluster_bootcfg[cluster];
+	struct core_boot_config *core_cfg = &cluster_cfg->core_config[core];
 	struct vpe_boot_config *vpe_cfg = &core_cfg->vpe_config[vpe_id];
 	unsigned int remote;
 	int err;
 
-	/* We don't yet support booting CPUs in other clusters */
-	if (cpu_cluster(&cpu_data[cpu]) != cpu_cluster(&raw_current_cpu_data))
-		return -ENOSYS;
-
 	vpe_cfg->pc = (unsigned long)&smp_bootstrap;
 	vpe_cfg->sp = __KSTK_TOS(idle);
 	vpe_cfg->gp = (unsigned long)task_thread_info(idle);
@@ -432,14 +637,15 @@ static int cps_boot_secondary(int cpu, struct task_struct *idle)
 
 	preempt_disable();
 
-	if (!test_bit(core, core_power)) {
+	if (!test_bit(core, cluster_cfg->core_power)) {
 		/* Boot a VPE on a powered down core */
-		boot_core(core, vpe_id);
+		boot_core(cluster, core, vpe_id);
 		goto out;
 	}
 
 	if (cpu_has_vp) {
-		mips_cm_lock_other(0, core, vpe_id, CM_GCR_Cx_OTHER_BLOCK_LOCAL);
+		mips_cm_lock_other(cluster, core, vpe_id,
+				   CM_GCR_Cx_OTHER_BLOCK_LOCAL);
 		if (mips_cm_is64)
 			write_gcr_co_reset64_base(core_entry_reg);
 		else
@@ -576,12 +782,14 @@ static void cps_kexec_nonboot_cpu(void)
 static int cps_cpu_disable(void)
 {
 	unsigned cpu = smp_processor_id();
+	struct cluster_boot_config *cluster_cfg;
 	struct core_boot_config *core_cfg;
 
 	if (!cps_pm_support_state(CPS_PM_POWER_GATED))
 		return -EINVAL;
 
-	core_cfg = &mips_cps_core_bootcfg[cpu_core(&current_cpu_data)];
+	cluster_cfg = &mips_cps_cluster_bootcfg[cpu_cluster(&current_cpu_data)];
+	core_cfg = &cluster_cfg->core_config[cpu_core(&current_cpu_data)];
 	atomic_sub(1 << cpu_vpe_id(&current_cpu_data), &core_cfg->vpe_mask);
 	smp_mb__after_atomic();
 	set_cpu_online(cpu, false);
@@ -647,11 +855,15 @@ static void cps_cpu_die(unsigned int cpu) { }
 
 static void cps_cleanup_dead_cpu(unsigned cpu)
 {
+	unsigned int cluster = cpu_cluster(&cpu_data[cpu]);
 	unsigned core = cpu_core(&cpu_data[cpu]);
 	unsigned int vpe_id = cpu_vpe_id(&cpu_data[cpu]);
 	ktime_t fail_time;
 	unsigned stat;
 	int err;
+	struct cluster_boot_config *cluster_cfg;
+
+	cluster_cfg = &mips_cps_cluster_bootcfg[cluster];
 
 	/*
 	 * Now wait for the CPU to actually offline. Without doing this that
@@ -703,7 +915,7 @@ static void cps_cleanup_dead_cpu(unsigned cpu)
 		} while (1);
 
 		/* Indicate the core is powered off */
-		bitmap_clear(core_power, core, 1);
+		bitmap_clear(cluster_cfg->core_power, core, 1);
 	} else if (cpu_has_mipsmt) {
 		/*
 		 * Have a CPU with access to the offlined CPUs registers wait
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 39e193cad2b9..4868e79f3b30 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -56,8 +56,10 @@ EXPORT_SYMBOL(cpu_sibling_map);
 cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(cpu_core_map);
 
+#ifndef CONFIG_HOTPLUG_PARALLEL
 static DECLARE_COMPLETION(cpu_starting);
 static DECLARE_COMPLETION(cpu_running);
+#endif
 
 /*
  * A logical cpu mask containing only one VPE per core to
@@ -74,6 +76,8 @@ static cpumask_t cpu_core_setup_map;
 
 cpumask_t cpu_coherent_mask;
 
+struct cpumask __cpu_primary_thread_mask __read_mostly;
+
 unsigned int smp_max_threads __initdata = UINT_MAX;
 
 static int __init early_nosmt(char *s)
@@ -367,6 +371,9 @@ asmlinkage void start_secondary(void)
 	 * to an option instead of something based on .cputype
 	 */
 
+#ifdef CONFIG_HOTPLUG_PARALLEL
+	cpuhp_ap_sync_alive();
+#endif
 	calibrate_delay();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
@@ -376,8 +383,10 @@ asmlinkage void start_secondary(void)
 	cpumask_set_cpu(cpu, &cpu_coherent_mask);
 	notify_cpu_starting(cpu);
 
+#ifndef CONFIG_HOTPLUG_PARALLEL
 	/* Notify boot CPU that we're starting & ready to sync counters */
 	complete(&cpu_starting);
+#endif
 
 	synchronise_count_slave(cpu);
 
@@ -386,11 +395,13 @@ asmlinkage void start_secondary(void)
 
 	calculate_cpu_foreign_map();
 
+#ifndef CONFIG_HOTPLUG_PARALLEL
 	/*
 	 * Notify boot CPU that we're up & online and it can safely return
 	 * from __cpu_up
 	 */
 	complete(&cpu_running);
+#endif
 
 	/*
 	 * irq will be enabled in ->smp_finish(), enabling it too early
@@ -447,6 +458,12 @@ void __init smp_prepare_boot_cpu(void)
 	set_cpu_online(0, true);
 }
 
+#ifdef CONFIG_HOTPLUG_PARALLEL
+int arch_cpuhp_kick_ap_alive(unsigned int cpu, struct task_struct *tidle)
+{
+	return mp_ops->boot_secondary(cpu, tidle);
+}
+#else
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	int err;
@@ -466,6 +483,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	wait_for_completion(&cpu_running);
 	return 0;
 }
+#endif
 
 #ifdef CONFIG_PROFILING
 /* Not really SMP stuff ... */
diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c
index 71c7e5e27567..dd31e3fffd24 100644
--- a/arch/mips/kernel/spram.c
+++ b/arch/mips/kernel/spram.c
@@ -26,10 +26,6 @@
 
 #define ERRCTL_SPRAM		(1 << 28)
 
-/* errctl access */
-#define read_c0_errctl(x) read_c0_ecc(x)
-#define write_c0_errctl(x) write_c0_ecc(x)
-
 /*
  * Different semantics to the set_c0_* function built by __BUILD_SET_C0
  */
diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl
index 0b9b7e25b69a..8cedc83c3266 100644
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -405,3 +405,7 @@
 464	n32	getxattrat			sys_getxattrat
 465	n32	listxattrat			sys_listxattrat
 466	n32	removexattrat			sys_removexattrat
+467	n32	open_tree_attr			sys_open_tree_attr
+468	n32	file_getattr			sys_file_getattr
+469	n32	file_setattr			sys_file_setattr
+470	n32	listns				sys_listns
diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl
index c844cd5cda62..9b92bddf06b5 100644
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -381,3 +381,7 @@
 464	n64	getxattrat			sys_getxattrat
 465	n64	listxattrat			sys_listxattrat
 466	n64	removexattrat			sys_removexattrat
+467	n64	open_tree_attr			sys_open_tree_attr
+468	n64	file_getattr			sys_file_getattr
+469	n64	file_setattr			sys_file_setattr
+470	n64	listns				sys_listns
diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl
index 349b8aad1159..f810b8a55716 100644
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -454,3 +454,7 @@
 464	o32	getxattrat			sys_getxattrat
 465	o32	listxattrat			sys_listxattrat
 466	o32	removexattrat			sys_removexattrat
+467	o32	open_tree_attr			sys_open_tree_attr
+468	o32	file_getattr			sys_file_getattr
+469	o32	file_setattr			sys_file_setattr
+470	o32	listns				sys_listns
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index dc29bd9656b0..8ec1e185b35c 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -38,6 +38,7 @@
 #include <linux/kdb.h>
 #include <linux/irq.h>
 #include <linux/perf_event.h>
+#include <linux/string_choices.h>
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
@@ -76,7 +77,7 @@
 #include "access-helper.h"
 
 extern void check_wait(void);
-extern asmlinkage void rollback_handle_int(void);
+extern asmlinkage void skipover_handle_int(void);
 extern asmlinkage void handle_int(void);
 extern asmlinkage void handle_adel(void);
 extern asmlinkage void handle_ades(void);
@@ -1705,10 +1706,10 @@ static inline __init void parity_protection_init(void)
 		l2parity &= l1parity;
 
 		/* Probe L1 ECC support */
-		cp0_ectl = read_c0_ecc();
-		write_c0_ecc(cp0_ectl | ERRCTL_PE);
+		cp0_ectl = read_c0_errctl();
+		write_c0_errctl(cp0_ectl | ERRCTL_PE);
 		back_to_back_c0_hazard();
-		cp0_ectl = read_c0_ecc();
+		cp0_ectl = read_c0_errctl();
 
 		/* Probe L2 ECC support */
 		gcr_ectl = read_gcr_err_control();
@@ -1727,9 +1728,9 @@ static inline __init void parity_protection_init(void)
 			cp0_ectl |= ERRCTL_PE;
 		else
 			cp0_ectl &= ~ERRCTL_PE;
-		write_c0_ecc(cp0_ectl);
+		write_c0_errctl(cp0_ectl);
 		back_to_back_c0_hazard();
-		WARN_ON(!!(read_c0_ecc() & ERRCTL_PE) != l1parity);
+		WARN_ON(!!(read_c0_errctl() & ERRCTL_PE) != l1parity);
 
 		/* Configure L2 ECC checking */
 		if (l2parity)
@@ -1741,8 +1742,8 @@ static inline __init void parity_protection_init(void)
 		gcr_ectl &= CM_GCR_ERR_CONTROL_L2_ECC_EN;
 		WARN_ON(!!gcr_ectl != l2parity);
 
-		pr_info("Cache parity protection %sabled\n",
-			l1parity ? "en" : "dis");
+		pr_info("Cache parity protection %s\n",
+			str_enabled_disabled(l1parity));
 		return;
 	}
 
@@ -1761,18 +1762,18 @@ static inline __init void parity_protection_init(void)
 			unsigned long errctl;
 			unsigned int l1parity_present, l2parity_present;
 
-			errctl = read_c0_ecc();
+			errctl = read_c0_errctl();
 			errctl &= ~(ERRCTL_PE|ERRCTL_L2P);
 
 			/* probe L1 parity support */
-			write_c0_ecc(errctl | ERRCTL_PE);
+			write_c0_errctl(errctl | ERRCTL_PE);
 			back_to_back_c0_hazard();
-			l1parity_present = (read_c0_ecc() & ERRCTL_PE);
+			l1parity_present = (read_c0_errctl() & ERRCTL_PE);
 
 			/* probe L2 parity support */
-			write_c0_ecc(errctl|ERRCTL_L2P);
+			write_c0_errctl(errctl|ERRCTL_L2P);
 			back_to_back_c0_hazard();
-			l2parity_present = (read_c0_ecc() & ERRCTL_L2P);
+			l2parity_present = (read_c0_errctl() & ERRCTL_L2P);
 
 			if (l1parity_present && l2parity_present) {
 				if (l1parity)
@@ -1791,20 +1792,20 @@ static inline __init void parity_protection_init(void)
 
 			printk(KERN_INFO "Writing ErrCtl register=%08lx\n", errctl);
 
-			write_c0_ecc(errctl);
+			write_c0_errctl(errctl);
 			back_to_back_c0_hazard();
-			errctl = read_c0_ecc();
+			errctl = read_c0_errctl();
 			printk(KERN_INFO "Readback ErrCtl register=%08lx\n", errctl);
 
 			if (l1parity_present)
-				printk(KERN_INFO "Cache parity protection %sabled\n",
-				       (errctl & ERRCTL_PE) ? "en" : "dis");
+				pr_info("Cache parity protection %s\n",
+					str_enabled_disabled(errctl & ERRCTL_PE));
 
 			if (l2parity_present) {
 				if (l1parity_present && l1parity)
 					errctl ^= ERRCTL_L2P;
-				printk(KERN_INFO "L2 cache parity protection %sabled\n",
-				       (errctl & ERRCTL_L2P) ? "en" : "dis");
+				pr_info("L2 cache parity protection %s\n",
+					str_enabled_disabled(errctl & ERRCTL_L2P));
 			}
 		}
 		break;
@@ -1812,11 +1813,11 @@ static inline __init void parity_protection_init(void)
 	case CPU_5KC:
 	case CPU_5KE:
 	case CPU_LOONGSON32:
-		write_c0_ecc(0x80000000);
+		write_c0_errctl(0x80000000);
 		back_to_back_c0_hazard();
 		/* Set the PE bit (bit 31) in the c0_errctl register. */
-		printk(KERN_INFO "Cache parity protection %sabled\n",
-		       (read_c0_ecc() & 0x80000000) ? "en" : "dis");
+		pr_info("Cache parity protection %s\n",
+			str_enabled_disabled(read_c0_errctl() & 0x80000000));
 		break;
 	case CPU_20KC:
 	case CPU_25KF:
@@ -1887,8 +1888,8 @@ asmlinkage void do_ftlb(void)
 	if ((cpu_has_mips_r2_r6) &&
 	    (((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS) ||
 	    ((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_LOONGSON))) {
-		pr_err("FTLB error exception, cp0_ecc=0x%08x:\n",
-		       read_c0_ecc());
+		pr_err("FTLB error exception, cp0_errctl=0x%08x:\n",
+		       read_c0_errctl());
 		pr_err("cp0_errorepc == %0*lx\n", field, read_c0_errorepc());
 		reg_val = read_c0_cacheerr();
 		pr_err("c0_cacheerr == %08x\n", reg_val);
@@ -2065,7 +2066,7 @@ void *set_vi_handler(int n, vi_handler_t addr)
 {
 	extern const u8 except_vec_vi[];
 	extern const u8 except_vec_vi_ori[], except_vec_vi_end[];
-	extern const u8 rollback_except_vec_vi[];
+	extern const u8 skipover_except_vec_vi[];
 	unsigned long handler;
 	unsigned long old_handler = vi_handlers[n];
 	int srssets = current_cpu_data.srsets;
@@ -2094,7 +2095,7 @@ void *set_vi_handler(int n, vi_handler_t addr)
 			change_c0_srsmap(0xf << n*4, 0 << n*4);
 	}
 
-	vec_start = using_rollback_handler() ? rollback_except_vec_vi :
+	vec_start = using_skipover_handler() ? skipover_except_vec_vi :
 					       except_vec_vi;
 #if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN)
 	ori_offset = except_vec_vi_ori - vec_start + 2;
@@ -2425,8 +2426,8 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();
 
-	set_except_vector(EXCCODE_INT, using_rollback_handler() ?
-					rollback_handle_int : handle_int);
+	set_except_vector(EXCCODE_INT, using_skipover_handler() ?
+					skipover_handle_int : handle_int);
 	set_except_vector(EXCCODE_MOD, handle_tlbm);
 	set_except_vector(EXCCODE_TLBL, handle_tlbl);
 	set_except_vector(EXCCODE_TLBS, handle_tlbs);
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
index 4c8e3c0aa210..de096777172f 100644
--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -11,9 +11,11 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/mman.h>
 #include <linux/random.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/vdso_datastore.h>
 
 #include <asm/abi.h>
 #include <asm/mips-cps.h>
@@ -22,20 +24,7 @@
 #include <vdso/helpers.h>
 #include <vdso/vsyscall.h>
 
-/* Kernel-provided data used by the VDSO. */
-static union vdso_data_store mips_vdso_data __page_aligned_data;
-struct vdso_data *vdso_data = mips_vdso_data.data;
-
-/*
- * Mapping for the VDSO data/GIC pages. The real pages are mapped manually, as
- * what we map and where within the area they are mapped is determined at
- * runtime.
- */
-static struct page *no_pages[] = { NULL };
-static struct vm_special_mapping vdso_vvar_mapping = {
-	.name = "[vvar]",
-	.pages = no_pages,
-};
+static_assert(VDSO_NR_PAGES == __VDSO_PAGES);
 
 static void __init init_vdso_image(struct mips_vdso_image *image)
 {
@@ -89,7 +78,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 {
 	struct mips_vdso_image *image = current->thread.abi->vdso;
 	struct mm_struct *mm = current->mm;
-	unsigned long gic_size, vvar_size, size, base, data_addr, vdso_addr, gic_pfn, gic_base;
+	unsigned long gic_size, size, base, data_addr, vdso_addr, gic_pfn, gic_base;
 	struct vm_area_struct *vma;
 	int ret;
 
@@ -97,11 +86,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 		return -EINTR;
 
 	if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
+		unsigned long unused;
+
 		/* Map delay slot emulation page */
-		base = mmap_region(NULL, STACK_TOP, PAGE_SIZE,
-				VM_READ | VM_EXEC |
-				VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
-				0, NULL);
+		base = do_mmap(NULL, STACK_TOP, PAGE_SIZE, PROT_READ | PROT_EXEC,
+			       MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, 0, 0, &unused,
+			       NULL);
 		if (IS_ERR_VALUE(base)) {
 			ret = base;
 			goto out;
@@ -117,8 +107,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	 * the counter registers at the start.
 	 */
 	gic_size = mips_gic_present() ? PAGE_SIZE : 0;
-	vvar_size = gic_size + PAGE_SIZE;
-	size = vvar_size + image->size;
+	size = gic_size + VDSO_NR_PAGES * PAGE_SIZE + image->size;
 
 	/*
 	 * Find a region that's large enough for us to perform the
@@ -141,15 +130,13 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	 */
 	if (cpu_has_dc_aliases) {
 		base = __ALIGN_MASK(base, shm_align_mask);
-		base += ((unsigned long)vdso_data - gic_size) & shm_align_mask;
+		base += ((unsigned long)vdso_k_time_data - gic_size) & shm_align_mask;
 	}
 
 	data_addr = base + gic_size;
-	vdso_addr = data_addr + PAGE_SIZE;
+	vdso_addr = data_addr + VDSO_NR_PAGES * PAGE_SIZE;
 
-	vma = _install_special_mapping(mm, base, vvar_size,
-				       VM_READ | VM_MAYREAD,
-				       &vdso_vvar_mapping);
+	vma = vdso_install_vvar_mapping(mm, data_addr);
 	if (IS_ERR(vma)) {
 		ret = PTR_ERR(vma);
 		goto out;
@@ -159,6 +146,17 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	if (gic_size) {
 		gic_base = (unsigned long)mips_gic_base + MIPS_GIC_USER_OFS;
 		gic_pfn = PFN_DOWN(__pa(gic_base));
+		static const struct vm_special_mapping gic_mapping = {
+			.name	= "[gic]",
+			.pages	= (struct page **) { NULL },
+		};
+
+		vma = _install_special_mapping(mm, base, gic_size, VM_READ | VM_MAYREAD,
+					       &gic_mapping);
+		if (IS_ERR(vma)) {
+			ret = PTR_ERR(vma);
+			goto out;
+		}
 
 		ret = io_remap_pfn_range(vma, base, gic_pfn, gic_size,
 					 pgprot_noncached(vma->vm_page_prot));
@@ -166,13 +164,6 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 			goto out;
 	}
 
-	/* Map data page. */
-	ret = remap_pfn_range(vma, data_addr,
-			      virt_to_phys(vdso_data) >> PAGE_SHIFT,
-			      PAGE_SIZE, vma->vm_page_prot);
-	if (ret)
-		goto out;
-
 	/* Map VDSO image. */
 	vma = _install_special_mapping(mm, vdso_addr, image->size,
 				       VM_READ | VM_EXEC |
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 737d0d4fdcd3..2b67c44adab9 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <linux/elf.h>
 #include <linux/seq_file.h>
+#include <linux/string.h>
 #include <linux/syscalls.h>
 #include <linux/moduleloader.h>
 #include <linux/interrupt.h>
@@ -582,7 +583,7 @@ static int vpe_elfload(struct vpe *v)
 	struct module mod; /* so we can re-use the relocations code */
 
 	memset(&mod, 0, sizeof(struct module));
-	strcpy(mod.name, "VPE loader");
+	strscpy(mod.name, "VPE loader");
 
 	hdr = (Elf_Ehdr *) v->pbuffer;
 	len = v->plen;
diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig
index ab57221fa4dd..cc13cc35f208 100644
--- a/arch/mips/kvm/Kconfig
+++ b/arch/mips/kvm/Kconfig
@@ -22,7 +22,6 @@ config KVM
 	select EXPORT_UASM
 	select KVM_COMMON
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
-	select HAVE_KVM_VCPU_ASYNC_IOCTL
 	select KVM_MMIO
 	select KVM_GENERIC_MMU_NOTIFIER
 	select KVM_GENERIC_HARDWARE_ENABLING
diff --git a/arch/mips/kvm/interrupt.c b/arch/mips/kvm/interrupt.c
index 0277942279ea..895a6f1781fd 100644
--- a/arch/mips/kvm/interrupt.c
+++ b/arch/mips/kvm/interrupt.c
@@ -27,27 +27,11 @@ void kvm_mips_deliver_interrupts(struct kvm_vcpu *vcpu, u32 cause)
 	unsigned long *pending_clr = &vcpu->arch.pending_exceptions_clr;
 	unsigned int priority;
 
-	if (!(*pending) && !(*pending_clr))
-		return;
-
-	priority = __ffs(*pending_clr);
-	while (priority <= MIPS_EXC_MAX) {
+	for_each_set_bit(priority, pending_clr, MIPS_EXC_MAX + 1)
 		kvm_mips_callbacks->irq_clear(vcpu, priority, cause);
 
-		priority = find_next_bit(pending_clr,
-					 BITS_PER_BYTE * sizeof(*pending_clr),
-					 priority + 1);
-	}
-
-	priority = __ffs(*pending);
-	while (priority <= MIPS_EXC_MAX) {
+	for_each_set_bit(priority, pending, MIPS_EXC_MAX + 1)
 		kvm_mips_callbacks->irq_deliver(vcpu, priority, cause);
-
-		priority = find_next_bit(pending,
-					 BITS_PER_BYTE * sizeof(*pending),
-					 priority + 1);
-	}
-
 }
 
 int kvm_mips_pending_timer(struct kvm_vcpu *vcpu)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index 60b43ea85c12..b0fb92fda4d4 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -288,9 +288,8 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 	if (err)
 		return err;
 
-	hrtimer_init(&vcpu->arch.comparecount_timer, CLOCK_MONOTONIC,
-		     HRTIMER_MODE_REL);
-	vcpu->arch.comparecount_timer.function = kvm_mips_comparecount_wakeup;
+	hrtimer_setup(&vcpu->arch.comparecount_timer, kvm_mips_comparecount_wakeup, CLOCK_MONOTONIC,
+		      HRTIMER_MODE_REL);
 
 	/*
 	 * Allocate space for host mode exception handlers that handle
@@ -316,7 +315,7 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 	 * we allocate is out of range, just give up now.
 	 */
 	if (!cpu_has_ebase_wg && virt_to_phys(gebase) >= 0x20000000) {
-		kvm_err("CP0_EBase.WG required for guest exception base %pK\n",
+		kvm_err("CP0_EBase.WG required for guest exception base %p\n",
 			gebase);
 		err = -ENOMEM;
 		goto out_free_gebase;
@@ -896,8 +895,8 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 	return r;
 }
 
-long kvm_arch_vcpu_async_ioctl(struct file *filp, unsigned int ioctl,
-			       unsigned long arg)
+long kvm_arch_vcpu_unlocked_ioctl(struct file *filp, unsigned int ioctl,
+				  unsigned long arg)
 {
 	struct kvm_vcpu *vcpu = filp->private_data;
 	void __user *argp = (void __user *)arg;
diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c
index 7b98def106e4..2a38c4267685 100644
--- a/arch/mips/lantiq/falcon/prom.c
+++ b/arch/mips/lantiq/falcon/prom.c
@@ -36,14 +36,14 @@
 #define BOOT_NVEC	(BOOT_REG_BASE | 0x04)
 #define BOOT_EVEC	(BOOT_REG_BASE | 0x08)
 
-void __init ltq_soc_nmi_setup(void)
+static void __init ltq_soc_nmi_setup(void)
 {
 	extern void (*nmi_handler)(void);
 
 	ltq_w32((unsigned long)&nmi_handler, (void *)BOOT_NVEC);
 }
 
-void __init ltq_soc_ejtag_setup(void)
+static void __init ltq_soc_ejtag_setup(void)
 {
 	extern void (*ejtag_debug_handler)(void);
 
diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
index 1187729d8cbb..577e6e6309a6 100644
--- a/arch/mips/lantiq/falcon/sysctrl.c
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -14,6 +14,7 @@
 #include <lantiq_soc.h>
 
 #include "../clk.h"
+#include "../prom.h"
 
 /* infrastructure control register */
 #define SYS1_INFRAC		0x00bc
@@ -72,11 +73,6 @@
 static void __iomem *sysctl_membase[3], *status_membase;
 void __iomem *ltq_sys1_membase, *ltq_ebu_membase;
 
-void falcon_trigger_hrst(int level)
-{
-	sysctl_w32(SYSCTL_SYS1, level & 1, SYS1_HRSTOUTC);
-}
-
 static inline void sysctl_wait(struct clk *clk,
 		unsigned int test, unsigned int reg)
 {
@@ -214,19 +210,16 @@ void __init ltq_soc_init(void)
 	of_node_put(np_syseth);
 	of_node_put(np_sysgpe);
 
-	if ((request_mem_region(res_status.start, resource_size(&res_status),
-				res_status.name) < 0) ||
-		(request_mem_region(res_ebu.start, resource_size(&res_ebu),
-				res_ebu.name) < 0) ||
-		(request_mem_region(res_sys[0].start,
-				resource_size(&res_sys[0]),
-				res_sys[0].name) < 0) ||
-		(request_mem_region(res_sys[1].start,
-				resource_size(&res_sys[1]),
-				res_sys[1].name) < 0) ||
-		(request_mem_region(res_sys[2].start,
-				resource_size(&res_sys[2]),
-				res_sys[2].name) < 0))
+	if ((!request_mem_region(res_status.start, resource_size(&res_status),
+				 res_status.name)) ||
+	    (!request_mem_region(res_ebu.start, resource_size(&res_ebu),
+				 res_ebu.name)) ||
+	    (!request_mem_region(res_sys[0].start, resource_size(&res_sys[0]),
+				 res_sys[0].name)) ||
+	    (!request_mem_region(res_sys[1].start, resource_size(&res_sys[1]),
+				 res_sys[1].name)) ||
+	    (!request_mem_region(res_sys[2].start, resource_size(&res_sys[2]),
+				 res_sys[2].name)))
 		pr_err("Failed to request core resources");
 
 	status_membase = ioremap(res_status.start,
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index 8f208007b8e8..961c55933a6d 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -16,6 +16,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/irq_cpu.h>
+#include <asm/time.h>
 
 #include <lantiq_soc.h>
 #include <irq.h>
@@ -335,7 +336,8 @@ static const struct irq_domain_ops irq_domain_ops = {
 	.map = icu_map,
 };
 
-int __init icu_of_init(struct device_node *node, struct device_node *parent)
+static int __init
+icu_of_init(struct device_node *node, struct device_node *parent)
 {
 	struct device_node *eiu_node;
 	struct resource res;
@@ -377,7 +379,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 	for (i = 0; i < MAX_IM; i++)
 		irq_set_chained_handler(i + 2, ltq_hw_irq_handler);
 
-	ltq_domain = irq_domain_add_linear(node,
+	ltq_domain = irq_domain_create_linear(of_fwnode_handle(node),
 		(MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE,
 		&irq_domain_ops, 0);
 
diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
index 47ad21430fe2..39fb3ecdd6b7 100644
--- a/arch/mips/lantiq/xway/clk.c
+++ b/arch/mips/lantiq/xway/clk.c
@@ -74,7 +74,7 @@ unsigned long ltq_danube_pp32_hz(void)
 	return clk;
 }
 
-unsigned long ltq_ar9_sys_hz(void)
+static unsigned long ltq_ar9_sys_hz(void)
 {
 	if (((ltq_cgu_r32(CGU_SYS) >> 3) & 0x3) == 0x2)
 		return CLOCK_393M;
diff --git a/arch/mips/lantiq/xway/dcdc.c b/arch/mips/lantiq/xway/dcdc.c
index 4a808f8c5beb..b79c462fd48a 100644
--- a/arch/mips/lantiq/xway/dcdc.c
+++ b/arch/mips/lantiq/xway/dcdc.c
@@ -46,7 +46,7 @@ static struct platform_driver dcdc_driver = {
 	},
 };
 
-int __init dcdc_init(void)
+static int __init dcdc_init(void)
 {
 	int ret = platform_driver_register(&dcdc_driver);
 
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index 934ac72937e5..4693eba6c296 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -289,7 +289,7 @@ static struct platform_driver dma_driver = {
 	},
 };
 
-int __init
+static int __init
 dma_init(void)
 {
 	return platform_driver_register(&dma_driver);
diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c
index 8d52001301de..484c9e3000c1 100644
--- a/arch/mips/lantiq/xway/gptu.c
+++ b/arch/mips/lantiq/xway/gptu.c
@@ -194,7 +194,7 @@ static struct platform_driver dma_driver = {
 	},
 };
 
-int __init gptu_init(void)
+static int __init gptu_init(void)
 {
 	int ret = platform_driver_register(&dma_driver);
 
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 5a75283d17f1..d9aa80afdf9d 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -485,7 +485,7 @@ void __init ltq_soc_init(void)
 	/* add our generic xway clocks */
 	clkdev_add_pmu("10000000.fpi", NULL, 0, 0, PMU_FPI);
 	clkdev_add_pmu("1e100a00.gptu", NULL, 1, 0, PMU_GPT);
-	clkdev_add_pmu("1e100bb0.stp", NULL, 1, 0, PMU_STP);
+	clkdev_add_pmu("1e100bb0.gpio", NULL, 1, 0, PMU_STP);
 	clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1);
 	clkdev_add_pmu("1e104100.dma", NULL, 1, 0, PMU_DMA);
 	clkdev_add_pmu("1e100800.spi", NULL, 1, 0, PMU_SPI);
@@ -497,7 +497,7 @@ void __init ltq_soc_init(void)
 		ifccr = CGU_IFCCR_VR9;
 		pcicr = CGU_PCICR_VR9;
 	} else {
-		clkdev_add_pmu("1e180000.etop", NULL, 1, 0, PMU_PPE);
+		clkdev_add_pmu("1e180000.ethernet", NULL, 1, 0, PMU_PPE);
 	}
 
 	if (!of_machine_is_compatible("lantiq,ase"))
@@ -531,9 +531,9 @@ void __init ltq_soc_init(void)
 						CLOCK_133M, CLOCK_133M);
 		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
 		clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
-		clkdev_add_pmu("1e180000.etop", "ppe", 1, 0, PMU_PPE);
-		clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY);
-		clkdev_add_pmu("1e180000.etop", "ephy", 1, 0, PMU_EPHY);
+		clkdev_add_pmu("1e180000.ethernet", "ppe", 1, 0, PMU_PPE);
+		clkdev_add_cgu("1e180000.ethernet", "ephycgu", CGU_EPHY);
+		clkdev_add_pmu("1e180000.ethernet", "ephy", 1, 0, PMU_EPHY);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_ASE_SDIO);
 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
 	} else if (of_machine_is_compatible("lantiq,grx390")) {
@@ -592,7 +592,7 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
 		clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P);
 		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM);
-		clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH);
+		clkdev_add_pmu("1e180000.ethernet", "switch", 1, 0, PMU_SWITCH);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
diff --git a/arch/mips/lib/.gitignore b/arch/mips/lib/.gitignore
new file mode 100644
index 000000000000..647d7a922e68
--- /dev/null
+++ b/arch/mips/lib/.gitignore
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+# This now-removed directory used to contain generated files.
+/crypto/
diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c
index a9cb28813f0b..1b7ce19fb3bb 100644
--- a/arch/mips/lib/iomap-pci.c
+++ b/arch/mips/lib/iomap-pci.c
@@ -43,4 +43,14 @@ void __iomem *__pci_ioport_map(struct pci_dev *dev,
 	return (void __iomem *) (ctrl->io_map_base + port);
 }
 
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+	struct pci_controller *ctrl = dev->bus->sysdata;
+	void __iomem *base = (void __iomem *)ctrl->io_map_base;
+
+	if (addr < base || addr > (base + resource_size(ctrl->io_resource)))
+		iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);
+
 #endif /* CONFIG_PCI_DRIVERS_LEGACY */
diff --git a/arch/mips/loongson2ef/common/machtype.c b/arch/mips/loongson2ef/common/machtype.c
index 82f6de49f20f..e635e66d2e6c 100644
--- a/arch/mips/loongson2ef/common/machtype.c
+++ b/arch/mips/loongson2ef/common/machtype.c
@@ -48,8 +48,7 @@ void __init prom_init_machtype(void)
 		return;
 	}
 	p += strlen("machtype=");
-	strncpy(str, p, MACHTYPE_LEN);
-	str[MACHTYPE_LEN] = '\0';
+	strscpy(str, p);
 	p = strstr(str, " ");
 	if (p)
 		*p = '\0';
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index a7c500959577..461d518b0033 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -1,38 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-if MACH_LOONGSON32
 
-choice
-	prompt "Machine Type"
-
-config LOONGSON1_LS1B
-	bool "Loongson LS1B board"
-	select CEVT_R4K if !MIPS_EXTERNAL_TIMER
-	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
-	select SYS_HAS_CPU_LOONGSON1B
-	select DMA_NONCOHERENT
-	select BOOT_ELF32
-	select IRQ_MIPS_CPU
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_HAS_EARLY_PRINTK
-	select USE_GENERIC_EARLY_PRINTK_8250
-	select COMMON_CLK
-
-config LOONGSON1_LS1C
-	bool "Loongson LS1C board"
-	select CEVT_R4K if !MIPS_EXTERNAL_TIMER
-	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
-	select SYS_HAS_CPU_LOONGSON1C
-	select DMA_NONCOHERENT
-	select BOOT_ELF32
-	select IRQ_MIPS_CPU
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_HAS_EARLY_PRINTK
-	select USE_GENERIC_EARLY_PRINTK_8250
-	select COMMON_CLK
-endchoice
-
-endif # MACH_LOONGSON32
+config BUILTIN_DTB_NAME
+	string "Source file for built-in DTB"
+	depends on BUILTIN_DTB
+	help
+	  Base name (without suffix, relative to arch/mips/boot/dts/loongson)
+	  for the DTS file that will be used to produce the DTB linked into
+	  the kernel.
diff --git a/arch/mips/loongson32/Makefile b/arch/mips/loongson32/Makefile
index ba10954b4b21..a4e40e534e6a 100644
--- a/arch/mips/loongson32/Makefile
+++ b/arch/mips/loongson32/Makefile
@@ -1,18 +1 @@
 # SPDX-License-Identifier: GPL-2.0-only
-#
-# Common code for all Loongson 1 based systems
-#
-
-obj-$(CONFIG_MACH_LOONGSON32) += common/
-
-#
-# Loongson LS1B board
-#
-
-obj-$(CONFIG_LOONGSON1_LS1B)  += ls1b/
-
-#
-# Loongson LS1C board
-#
-
-obj-$(CONFIG_LOONGSON1_LS1C)  += ls1c/
diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform
index 3b9673e7a2fa..67fd07450488 100644
--- a/arch/mips/loongson32/Platform
+++ b/arch/mips/loongson32/Platform
@@ -1,3 +1,2 @@
 cflags-$(CONFIG_CPU_LOONGSON32)		+= -march=mips32r2 -Wa,--trap
-cflags-$(CONFIG_MACH_LOONGSON32)	+= -I$(srctree)/arch/mips/include/asm/mach-loongson32
 load-$(CONFIG_CPU_LOONGSON32)		+= 0xffffffff80200000
diff --git a/arch/mips/loongson32/common/Makefile b/arch/mips/loongson32/common/Makefile
deleted file mode 100644
index f3950d308187..000000000000
--- a/arch/mips/loongson32/common/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for common code of loongson1 based machines.
-#
-
-obj-y	+= time.o irq.o platform.o prom.o setup.o
diff --git a/arch/mips/loongson32/common/irq.c b/arch/mips/loongson32/common/irq.c
deleted file mode 100644
index 9a50070f74f7..000000000000
--- a/arch/mips/loongson32/common/irq.c
+++ /dev/null
@@ -1,191 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq_cpu.h>
-
-#include <loongson1.h>
-#include <irq.h>
-
-#define LS1X_INTC_REG(n, x) \
-		((void __iomem *)KSEG1ADDR(LS1X_INTC_BASE + (n * 0x18) + (x)))
-
-#define LS1X_INTC_INTISR(n)		LS1X_INTC_REG(n, 0x0)
-#define LS1X_INTC_INTIEN(n)		LS1X_INTC_REG(n, 0x4)
-#define LS1X_INTC_INTSET(n)		LS1X_INTC_REG(n, 0x8)
-#define LS1X_INTC_INTCLR(n)		LS1X_INTC_REG(n, 0xc)
-#define LS1X_INTC_INTPOL(n)		LS1X_INTC_REG(n, 0x10)
-#define LS1X_INTC_INTEDGE(n)		LS1X_INTC_REG(n, 0x14)
-
-static void ls1x_irq_ack(struct irq_data *d)
-{
-	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
-	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
-	__raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
-			| (1 << bit), LS1X_INTC_INTCLR(n));
-}
-
-static void ls1x_irq_mask(struct irq_data *d)
-{
-	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
-	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
-	__raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
-			& ~(1 << bit), LS1X_INTC_INTIEN(n));
-}
-
-static void ls1x_irq_mask_ack(struct irq_data *d)
-{
-	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
-	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
-	__raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
-			& ~(1 << bit), LS1X_INTC_INTIEN(n));
-	__raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
-			| (1 << bit), LS1X_INTC_INTCLR(n));
-}
-
-static void ls1x_irq_unmask(struct irq_data *d)
-{
-	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
-	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
-	__raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
-			| (1 << bit), LS1X_INTC_INTIEN(n));
-}
-
-static int ls1x_irq_settype(struct irq_data *d, unsigned int type)
-{
-	unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
-	unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
-
-	switch (type) {
-	case IRQ_TYPE_LEVEL_HIGH:
-		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
-			| (1 << bit), LS1X_INTC_INTPOL(n));
-		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
-			& ~(1 << bit), LS1X_INTC_INTEDGE(n));
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
-			& ~(1 << bit), LS1X_INTC_INTPOL(n));
-		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
-			& ~(1 << bit), LS1X_INTC_INTEDGE(n));
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
-			| (1 << bit), LS1X_INTC_INTPOL(n));
-		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
-			| (1 << bit), LS1X_INTC_INTEDGE(n));
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
-			& ~(1 << bit), LS1X_INTC_INTPOL(n));
-		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
-			| (1 << bit), LS1X_INTC_INTEDGE(n));
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		__raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
-			& ~(1 << bit), LS1X_INTC_INTPOL(n));
-		__raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
-			| (1 << bit), LS1X_INTC_INTEDGE(n));
-		break;
-	case IRQ_TYPE_NONE:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct irq_chip ls1x_irq_chip = {
-	.name		= "LS1X-INTC",
-	.irq_ack	= ls1x_irq_ack,
-	.irq_mask	= ls1x_irq_mask,
-	.irq_mask_ack	= ls1x_irq_mask_ack,
-	.irq_unmask	= ls1x_irq_unmask,
-	.irq_set_type   = ls1x_irq_settype,
-};
-
-static void ls1x_irq_dispatch(int n)
-{
-	u32 int_status, irq;
-
-	/* Get pending sources, masked by current enables */
-	int_status = __raw_readl(LS1X_INTC_INTISR(n)) &
-			__raw_readl(LS1X_INTC_INTIEN(n));
-
-	if (int_status) {
-		irq = LS1X_IRQ(n, __ffs(int_status));
-		do_IRQ(irq);
-	}
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending;
-
-	pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
-	if (pending & CAUSEF_IP7)
-		do_IRQ(TIMER_IRQ);
-	else if (pending & CAUSEF_IP2)
-		ls1x_irq_dispatch(0); /* INT0 */
-	else if (pending & CAUSEF_IP3)
-		ls1x_irq_dispatch(1); /* INT1 */
-	else if (pending & CAUSEF_IP4)
-		ls1x_irq_dispatch(2); /* INT2 */
-	else if (pending & CAUSEF_IP5)
-		ls1x_irq_dispatch(3); /* INT3 */
-	else if (pending & CAUSEF_IP6)
-		ls1x_irq_dispatch(4); /* INT4 */
-	else
-		spurious_interrupt();
-
-}
-
-static void __init ls1x_irq_init(int base)
-{
-	int n;
-
-	/* Disable interrupts and clear pending,
-	 * setup all IRQs as high level triggered
-	 */
-	for (n = 0; n < INTN; n++) {
-		__raw_writel(0x0, LS1X_INTC_INTIEN(n));
-		__raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
-		__raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
-		/* set DMA0, DMA1 and DMA2 to edge trigger */
-		__raw_writel(n ? 0x0 : 0xe000, LS1X_INTC_INTEDGE(n));
-	}
-
-
-	for (n = base; n < NR_IRQS; n++) {
-		irq_set_chip_and_handler(n, &ls1x_irq_chip,
-					 handle_level_irq);
-	}
-
-	if (request_irq(INT0_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
-		pr_err("Failed to request irq %d (cascade)\n", INT0_IRQ);
-	if (request_irq(INT1_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
-		pr_err("Failed to request irq %d (cascade)\n", INT1_IRQ);
-	if (request_irq(INT2_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
-		pr_err("Failed to request irq %d (cascade)\n", INT2_IRQ);
-	if (request_irq(INT3_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
-		pr_err("Failed to request irq %d (cascade)\n", INT3_IRQ);
-#if defined(CONFIG_LOONGSON1_LS1C)
-	if (request_irq(INT4_IRQ, no_action, IRQF_NO_THREAD, "cascade", NULL))
-		pr_err("Failed to request irq %d (cascade)\n", INT4_IRQ);
-#endif
-}
-
-void __init arch_init_irq(void)
-{
-	mips_cpu_irq_init();
-	ls1x_irq_init(LS1X_IRQ_BASE);
-}
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
deleted file mode 100644
index 623eb4bc7b41..000000000000
--- a/arch/mips/loongson32/common/platform.c
+++ /dev/null
@@ -1,285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sizes.h>
-#include <linux/phy.h>
-#include <linux/serial_8250.h>
-#include <linux/stmmac.h>
-#include <linux/usb/ehci_pdriver.h>
-
-#include <platform.h>
-#include <loongson1.h>
-
-/* 8250/16550 compatible UART */
-#define LS1X_UART(_id)						\
-	{							\
-		.mapbase	= LS1X_UART ## _id ## _BASE,	\
-		.irq		= LS1X_UART ## _id ## _IRQ,	\
-		.iotype		= UPIO_MEM,			\
-		.flags		= UPF_IOREMAP | UPF_FIXED_TYPE, \
-		.type		= PORT_16550A,			\
-	}
-
-static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
-	LS1X_UART(0),
-	LS1X_UART(1),
-	LS1X_UART(2),
-	LS1X_UART(3),
-	{},
-};
-
-struct platform_device ls1x_uart_pdev = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data = ls1x_serial8250_pdata,
-	},
-};
-
-void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
-{
-	struct clk *clk;
-	struct plat_serial8250_port *p;
-
-	clk = clk_get(&pdev->dev, pdev->name);
-	if (IS_ERR(clk)) {
-		pr_err("unable to get %s clock, err=%ld",
-		       pdev->name, PTR_ERR(clk));
-		return;
-	}
-	clk_prepare_enable(clk);
-
-	for (p = pdev->dev.platform_data; p->flags != 0; ++p)
-		p->uartclk = clk_get_rate(clk);
-}
-
-/* Synopsys Ethernet GMAC */
-static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
-	.phy_mask	= 0,
-};
-
-static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
-	.pbl		= 1,
-};
-
-int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
-{
-	struct plat_stmmacenet_data *plat_dat = NULL;
-	u32 val;
-
-	val = __raw_readl(LS1X_MUX_CTRL1);
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-	plat_dat = dev_get_platdata(&pdev->dev);
-	if (plat_dat->bus_id) {
-		__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
-			     GMAC1_USE_UART0, LS1X_MUX_CTRL0);
-		switch (plat_dat->phy_interface) {
-		case PHY_INTERFACE_MODE_RGMII:
-			val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
-			break;
-		case PHY_INTERFACE_MODE_MII:
-			val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
-			break;
-		default:
-			pr_err("unsupported mii mode %d\n",
-			       plat_dat->phy_interface);
-			return -ENOTSUPP;
-		}
-		val &= ~GMAC1_SHUT;
-	} else {
-		switch (plat_dat->phy_interface) {
-		case PHY_INTERFACE_MODE_RGMII:
-			val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
-			break;
-		case PHY_INTERFACE_MODE_MII:
-			val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
-			break;
-		default:
-			pr_err("unsupported mii mode %d\n",
-			       plat_dat->phy_interface);
-			return -ENOTSUPP;
-		}
-		val &= ~GMAC0_SHUT;
-	}
-	__raw_writel(val, LS1X_MUX_CTRL1);
-#elif defined(CONFIG_LOONGSON1_LS1C)
-	plat_dat = dev_get_platdata(&pdev->dev);
-
-	val &= ~PHY_INTF_SELI;
-	if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
-		val |= 0x4 << PHY_INTF_SELI_SHIFT;
-	__raw_writel(val, LS1X_MUX_CTRL1);
-
-	val = __raw_readl(LS1X_MUX_CTRL0);
-	__raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
-#endif
-
-	return 0;
-}
-
-static struct plat_stmmacenet_data ls1x_eth0_pdata = {
-	.bus_id			= 0,
-	.phy_addr		= -1,
-#if defined(CONFIG_LOONGSON1_LS1B)
-	.phy_interface		= PHY_INTERFACE_MODE_MII,
-#elif defined(CONFIG_LOONGSON1_LS1C)
-	.phy_interface		= PHY_INTERFACE_MODE_RMII,
-#endif
-	.mdio_bus_data		= &ls1x_mdio_bus_data,
-	.dma_cfg		= &ls1x_eth_dma_cfg,
-	.has_gmac		= 1,
-	.tx_coe			= 1,
-	.rx_queues_to_use	= 1,
-	.tx_queues_to_use	= 1,
-	.init			= ls1x_eth_mux_init,
-};
-
-static struct resource ls1x_eth0_resources[] = {
-	[0] = {
-		.start	= LS1X_GMAC0_BASE,
-		.end	= LS1X_GMAC0_BASE + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "macirq",
-		.start	= LS1X_GMAC0_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device ls1x_eth0_pdev = {
-	.name		= "stmmaceth",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ls1x_eth0_resources),
-	.resource	= ls1x_eth0_resources,
-	.dev		= {
-		.platform_data = &ls1x_eth0_pdata,
-	},
-};
-
-#ifdef CONFIG_LOONGSON1_LS1B
-static struct plat_stmmacenet_data ls1x_eth1_pdata = {
-	.bus_id			= 1,
-	.phy_addr		= -1,
-	.phy_interface		= PHY_INTERFACE_MODE_MII,
-	.mdio_bus_data		= &ls1x_mdio_bus_data,
-	.dma_cfg		= &ls1x_eth_dma_cfg,
-	.has_gmac		= 1,
-	.tx_coe			= 1,
-	.rx_queues_to_use	= 1,
-	.tx_queues_to_use	= 1,
-	.init			= ls1x_eth_mux_init,
-};
-
-static struct resource ls1x_eth1_resources[] = {
-	[0] = {
-		.start	= LS1X_GMAC1_BASE,
-		.end	= LS1X_GMAC1_BASE + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "macirq",
-		.start	= LS1X_GMAC1_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device ls1x_eth1_pdev = {
-	.name		= "stmmaceth",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(ls1x_eth1_resources),
-	.resource	= ls1x_eth1_resources,
-	.dev		= {
-		.platform_data = &ls1x_eth1_pdata,
-	},
-};
-#endif	/* CONFIG_LOONGSON1_LS1B */
-
-/* GPIO */
-static struct resource ls1x_gpio0_resources[] = {
-	[0] = {
-		.start	= LS1X_GPIO0_BASE,
-		.end	= LS1X_GPIO0_BASE + SZ_4 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device ls1x_gpio0_pdev = {
-	.name		= "ls1x-gpio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ls1x_gpio0_resources),
-	.resource	= ls1x_gpio0_resources,
-};
-
-static struct resource ls1x_gpio1_resources[] = {
-	[0] = {
-		.start	= LS1X_GPIO1_BASE,
-		.end	= LS1X_GPIO1_BASE + SZ_4 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device ls1x_gpio1_pdev = {
-	.name		= "ls1x-gpio",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(ls1x_gpio1_resources),
-	.resource	= ls1x_gpio1_resources,
-};
-
-/* USB EHCI */
-static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ls1x_ehci_resources[] = {
-	[0] = {
-		.start	= LS1X_EHCI_BASE,
-		.end	= LS1X_EHCI_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LS1X_EHCI_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct usb_ehci_pdata ls1x_ehci_pdata = {
-};
-
-struct platform_device ls1x_ehci_pdev = {
-	.name		= "ehci-platform",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ls1x_ehci_resources),
-	.resource	= ls1x_ehci_resources,
-	.dev		= {
-		.dma_mask = &ls1x_ehci_dmamask,
-		.platform_data = &ls1x_ehci_pdata,
-	},
-};
-
-/* Real Time Clock */
-struct platform_device ls1x_rtc_pdev = {
-	.name		= "ls1x-rtc",
-	.id		= -1,
-};
-
-/* Watchdog */
-static struct resource ls1x_wdt_resources[] = {
-	{
-		.start	= LS1X_WDT_BASE,
-		.end	= LS1X_WDT_BASE + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device ls1x_wdt_pdev = {
-	.name		= "ls1x-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ls1x_wdt_resources),
-	.resource	= ls1x_wdt_resources,
-};
diff --git a/arch/mips/loongson32/common/prom.c b/arch/mips/loongson32/common/prom.c
deleted file mode 100644
index fc580a22748e..000000000000
--- a/arch/mips/loongson32/common/prom.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Modified from arch/mips/pnx833x/common/prom.c.
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/serial_reg.h>
-#include <asm/fw/fw.h>
-
-#include <loongson1.h>
-
-unsigned long memsize;
-
-void __init prom_init(void)
-{
-	void __iomem *uart_base;
-
-	fw_init_cmdline();
-
-	memsize = fw_getenvl("memsize");
-	if(!memsize)
-		memsize = DEFAULT_MEMSIZE;
-
-	if (strstr(arcs_cmdline, "console=ttyS3"))
-		uart_base = ioremap(LS1X_UART3_BASE, 0x0f);
-	else if (strstr(arcs_cmdline, "console=ttyS2"))
-		uart_base = ioremap(LS1X_UART2_BASE, 0x0f);
-	else if (strstr(arcs_cmdline, "console=ttyS1"))
-		uart_base = ioremap(LS1X_UART1_BASE, 0x0f);
-	else
-		uart_base = ioremap(LS1X_UART0_BASE, 0x0f);
-	setup_8250_early_printk_port((unsigned long)uart_base, 0, 0);
-}
-
-void __init plat_mem_setup(void)
-{
-	memblock_add(0x0, (memsize << 20));
-}
diff --git a/arch/mips/loongson32/common/setup.c b/arch/mips/loongson32/common/setup.c
deleted file mode 100644
index 4733fe037176..000000000000
--- a/arch/mips/loongson32/common/setup.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/cpu-info.h>
-#include <asm/bootinfo.h>
-
-const char *get_system_type(void)
-{
-	unsigned int processor_id = (&current_cpu_data)->processor_id;
-
-	switch (processor_id & PRID_REV_MASK) {
-	case PRID_REV_LOONGSON1B:
-#if defined(CONFIG_LOONGSON1_LS1B)
-		return "LOONGSON LS1B";
-#elif defined(CONFIG_LOONGSON1_LS1C)
-		return "LOONGSON LS1C";
-#endif
-	default:
-		return "LOONGSON (unknown)";
-	}
-}
diff --git a/arch/mips/loongson32/common/time.c b/arch/mips/loongson32/common/time.c
deleted file mode 100644
index 74ad2b17918d..000000000000
--- a/arch/mips/loongson32/common/time.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/clk.h>
-#include <linux/of_clk.h>
-#include <asm/time.h>
-
-void __init plat_time_init(void)
-{
-	struct clk *clk = NULL;
-
-	/* initialize LS1X clocks */
-	of_clk_init(NULL);
-
-	/* setup mips r4k timer */
-	clk = clk_get(NULL, "cpu_clk");
-	if (IS_ERR(clk))
-		panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
-
-	mips_hpt_frequency = clk_get_rate(clk) / 2;
-}
diff --git a/arch/mips/loongson32/ls1b/Makefile b/arch/mips/loongson32/ls1b/Makefile
deleted file mode 100644
index 33c574dc0f7f..000000000000
--- a/arch/mips/loongson32/ls1b/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for loongson1B based machines.
-#
-
-obj-y += board.o
diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
deleted file mode 100644
index fe115bdcb22c..000000000000
--- a/arch/mips/loongson32/ls1b/board.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/leds.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sizes.h>
-
-#include <loongson1.h>
-#include <platform.h>
-
-static const struct gpio_led ls1x_gpio_leds[] __initconst = {
-	{
-		.name			= "LED9",
-		.default_trigger	= "heartbeat",
-		.gpio			= 38,
-		.active_low		= 1,
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	}, {
-		.name			= "LED6",
-		.default_trigger	= "nand-disk",
-		.gpio			= 39,
-		.active_low		= 1,
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-};
-
-static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
-	.num_leds	= ARRAY_SIZE(ls1x_gpio_leds),
-	.leds		= ls1x_gpio_leds,
-};
-
-static struct platform_device *ls1b_platform_devices[] __initdata = {
-	&ls1x_uart_pdev,
-	&ls1x_eth0_pdev,
-	&ls1x_eth1_pdev,
-	&ls1x_ehci_pdev,
-	&ls1x_gpio0_pdev,
-	&ls1x_gpio1_pdev,
-	&ls1x_rtc_pdev,
-	&ls1x_wdt_pdev,
-};
-
-static int __init ls1b_platform_init(void)
-{
-	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
-
-	gpio_led_register_device(-1, &ls1x_led_pdata);
-
-	return platform_add_devices(ls1b_platform_devices,
-				   ARRAY_SIZE(ls1b_platform_devices));
-}
-
-arch_initcall(ls1b_platform_init);
diff --git a/arch/mips/loongson32/ls1c/Makefile b/arch/mips/loongson32/ls1c/Makefile
deleted file mode 100644
index 1cf3aa264d55..000000000000
--- a/arch/mips/loongson32/ls1c/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for loongson1C based machines.
-#
-
-obj-y += board.o
diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
deleted file mode 100644
index 9dcfe9de55b0..000000000000
--- a/arch/mips/loongson32/ls1c/board.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com>
- */
-
-#include <platform.h>
-
-static struct platform_device *ls1c_platform_devices[] __initdata = {
-	&ls1x_uart_pdev,
-	&ls1x_eth0_pdev,
-	&ls1x_rtc_pdev,
-	&ls1x_wdt_pdev,
-};
-
-static int __init ls1c_platform_init(void)
-{
-	ls1x_serial_set_uartclk(&ls1x_uart_pdev);
-
-	return platform_add_devices(ls1c_platform_devices,
-				   ARRAY_SIZE(ls1c_platform_devices));
-}
-
-arch_initcall(ls1c_platform_init);
diff --git a/arch/mips/loongson64/boardinfo.c b/arch/mips/loongson64/boardinfo.c
index 280989c5a137..827ab94b98b3 100644
--- a/arch/mips/loongson64/boardinfo.c
+++ b/arch/mips/loongson64/boardinfo.c
@@ -1,17 +1,18 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/kobject.h>
+#include <linux/string.h>
 #include <boot_param.h>
 
 static ssize_t boardinfo_show(struct kobject *kobj,
 			      struct kobj_attribute *attr, char *buf)
 {
-	char board_manufacturer[64] = {0};
+	char board_manufacturer[64];
 	char *tmp_board_manufacturer = board_manufacturer;
-	char bios_vendor[64] = {0};
+	char bios_vendor[64];
 	char *tmp_bios_vendor = bios_vendor;
 
-	strcpy(board_manufacturer, eboard->name);
-	strcpy(bios_vendor, einter->description);
+	strscpy_pad(board_manufacturer, eboard->name);
+	strscpy_pad(bios_vendor, einter->description);
 
 	return sprintf(buf,
 		       "Board Info\n"
@@ -21,13 +22,11 @@ static ssize_t boardinfo_show(struct kobject *kobj,
 		       "BIOS Info\n"
 		       "Vendor\t\t\t: %s\n"
 		       "Version\t\t\t: %s\n"
-		       "ROM Size\t\t: %d KB\n"
 		       "Release Date\t\t: %s\n",
 		       strsep(&tmp_board_manufacturer, "-"),
 		       eboard->name,
 		       strsep(&tmp_bios_vendor, "-"),
 		       einter->description,
-		       einter->size,
 		       especial->special_name);
 }
 static struct kobj_attribute boardinfo_attr = __ATTR(boardinfo, 0444,
diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c
index 09ff05269861..be8d2ad10750 100644
--- a/arch/mips/loongson64/env.c
+++ b/arch/mips/loongson64/env.c
@@ -17,6 +17,7 @@
 #include <linux/dma-map-ops.h>
 #include <linux/export.h>
 #include <linux/pci_ids.h>
+#include <linux/string_choices.h>
 #include <asm/bootinfo.h>
 #include <loongson.h>
 #include <boot_param.h>
@@ -162,7 +163,7 @@ void __init prom_lefi_init_env(void)
 		dma_default_coherent = !eirq_source->dma_noncoherent;
 	}
 
-	pr_info("Firmware: Coherent DMA: %s\n", dma_default_coherent ? "on" : "off");
+	pr_info("Firmware: Coherent DMA: %s\n", str_on_off(dma_default_coherent));
 
 	loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm;
 	loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;
diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
index a35dd7311795..b9f90f33fc9a 100644
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -128,7 +128,7 @@ void __init prom_init(void)
 	}
 
 	/* init base address of io space */
-	set_io_port_base(PCI_IOBASE);
+	set_io_port_base((unsigned long)PCI_IOBASE);
 
 	if (loongson_sysconf.early_config)
 		loongson_sysconf.early_config();
@@ -178,7 +178,7 @@ static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_
 		return -EINVAL;
 	}
 
-	vaddr = PCI_IOBASE + range->io_start;
+	vaddr = (unsigned long)PCI_IOBASE + range->io_start;
 
 	vmap_page_range(vaddr, vaddr + size, hw_start, pgprot_device(PAGE_KERNEL));
 
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index 8388400d052f..95d5f553ce19 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -164,13 +164,6 @@ void __init paging_init(void)
 	free_area_init(zones_size);
 }
 
-void __init mem_init(void)
-{
-	high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT);
-	memblock_free_all();
-	setup_zero_pages();	/* This comes from node 0 */
-}
-
 /* All PCI device belongs to logical Node-0 */
 int pcibus_to_node(struct pci_bus *bus)
 {
diff --git a/arch/mips/loongson64/setup.c b/arch/mips/loongson64/setup.c
index 257038e18779..b3e590eae952 100644
--- a/arch/mips/loongson64/setup.c
+++ b/arch/mips/loongson64/setup.c
@@ -3,7 +3,6 @@
  * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  */
-#include <linux/export.h>
 #include <linux/init.h>
 
 #include <asm/bootinfo.h>
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 265bc57819df..c89e70df43d8 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -1660,7 +1660,7 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 		break;
 	}
 
-	case 0x3:
+	case 0x7:
 		if (MIPSInst_FUNC(ir) != pfetch_op)
 			return SIGILL;
 
diff --git a/arch/mips/math-emu/me-debugfs.c b/arch/mips/math-emu/me-debugfs.c
index d5ad76b2bb67..aeddf7aecfc5 100644
--- a/arch/mips/math-emu/me-debugfs.c
+++ b/arch/mips/math-emu/me-debugfs.c
@@ -37,11 +37,11 @@ DEFINE_SIMPLE_ATTRIBUTE(fops_fpuemu_stat, fpuemu_stat_get, NULL, "%llu\n");
  * used in debugfs item names to be clearly associated to corresponding
  * MIPS FPU instructions.
  */
-static void adjust_instruction_counter_name(char *out_name, char *in_name)
+static void adjust_instruction_counter_name(char *out_name, char *in_name, size_t len)
 {
 	int i = 0;
 
-	strcpy(out_name, in_name);
+	strscpy(out_name, in_name, len);
 	while (in_name[i] != '\0') {
 		if (out_name[i] == '_')
 			out_name[i] = '.';
@@ -226,7 +226,7 @@ do {									\
 
 #define FPU_STAT_CREATE_EX(m)						\
 do {									\
-	adjust_instruction_counter_name(name, #m);			\
+	adjust_instruction_counter_name(name, #m, sizeof(name));			\
 									\
 	debugfs_create_file(name, 0444, fpuemu_debugfs_inst_dir,	\
 				(void *)FPU_EMU_STAT_OFFSET(m),		\
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index bf9a37c60e9f..e3b4224c9a40 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -99,9 +99,9 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
 	return 0;
 }
 
-void __flush_dcache_pages(struct page *page, unsigned int nr)
+void __flush_dcache_folio_pages(struct folio *folio, struct page *page,
+		unsigned int nr)
 {
-	struct folio *folio = page_folio(page);
 	struct address_space *mapping = folio_flush_mapping(folio);
 	unsigned long addr;
 	unsigned int i;
@@ -117,12 +117,12 @@ void __flush_dcache_pages(struct page *page, unsigned int nr)
 	 * get faulted into the tlb (and thus flushed) anyways.
 	 */
 	for (i = 0; i < nr; i++) {
-		addr = (unsigned long)kmap_local_page(nth_page(page, i));
+		addr = (unsigned long)kmap_local_page(page + i);
 		flush_data_cache_page(addr);
 		kunmap_local((void *)addr);
 	}
 }
-EXPORT_SYMBOL(__flush_dcache_pages);
+EXPORT_SYMBOL(__flush_dcache_folio_pages);
 
 void __flush_anon_page(struct page *page, unsigned long vmaddr)
 {
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 4583d1a2a73e..a673d3d68254 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -59,24 +59,16 @@ EXPORT_SYMBOL(zero_page_mask);
 /*
  * Not static inline because used by IP27 special magic initialization code
  */
-void setup_zero_pages(void)
+static void __init setup_zero_pages(void)
 {
-	unsigned int order, i;
-	struct page *page;
+	unsigned int order;
 
 	if (cpu_has_vce)
 		order = 3;
 	else
 		order = 0;
 
-	empty_zero_page = __get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
-	if (!empty_zero_page)
-		panic("Oh boy, that early out of memory?");
-
-	page = virt_to_page((void *)empty_zero_page);
-	split_page(page, order);
-	for (i = 0; i < (1 << order); i++, page++)
-		mark_page_reserved(page);
+	empty_zero_page = (unsigned long)memblock_alloc_or_panic(PAGE_SIZE << order, PAGE_SIZE);
 
 	zero_page_mask = ((PAGE_SIZE << order) - 1) & PAGE_MASK;
 }
@@ -423,17 +415,8 @@ void __init paging_init(void)
 		       " %ldk highmem ignored\n",
 		       (highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10));
 		max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn;
-
-		max_mapnr = max_low_pfn;
-	} else if (highend_pfn) {
-		max_mapnr = highend_pfn;
-	} else {
-		max_mapnr = max_low_pfn;
 	}
-#else
-	max_mapnr = max_low_pfn;
 #endif
-	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
 
 	free_area_init(max_zone_pfns);
 }
@@ -442,26 +425,7 @@ void __init paging_init(void)
 static struct kcore_list kcore_kseg0;
 #endif
 
-static inline void __init mem_init_free_highmem(void)
-{
-#ifdef CONFIG_HIGHMEM
-	unsigned long tmp;
-
-	if (cpu_has_dc_aliases)
-		return;
-
-	for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) {
-		struct page *page = pfn_to_page(tmp);
-
-		if (!memblock_is_memory(PFN_PHYS(tmp)))
-			SetPageReserved(page);
-		else
-			free_highmem_page(page);
-	}
-#endif
-}
-
-void __init mem_init(void)
+void __init arch_mm_preinit(void)
 {
 	/*
 	 * When PFN_PTE_SHIFT is greater than PAGE_SHIFT we won't have enough PTE
@@ -470,9 +434,7 @@ void __init mem_init(void)
 	BUILD_BUG_ON(IS_ENABLED(CONFIG_32BIT) && (PFN_PTE_SHIFT > PAGE_SHIFT));
 
 	maar_init();
-	memblock_free_all();
 	setup_zero_pages();	/* Setup zeroed pages.  */
-	mem_init_free_highmem();
 
 #ifdef CONFIG_64BIT
 	if ((unsigned long) &_text > (unsigned long) CKSEG0)
@@ -482,6 +444,11 @@ void __init mem_init(void)
 				0x80000000 - 4, KCORE_TEXT);
 #endif
 }
+#else  /* CONFIG_NUMA */
+void __init arch_mm_preinit(void)
+{
+	setup_zero_pages();	/* This comes from node 0 */
+}
 #endif /* !CONFIG_NUMA */
 
 void free_init_pages(const char *what, unsigned long begin, unsigned long end)
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index d8243d61ef32..c6c4576cd4a8 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -44,9 +44,9 @@ static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages,
  * ioremap_prot gives the caller control over cache coherency attributes (CCA)
  */
 void __iomem *ioremap_prot(phys_addr_t phys_addr, unsigned long size,
-		unsigned long prot_val)
+			   pgprot_t prot)
 {
-	unsigned long flags = prot_val & _CACHE_MASK;
+	unsigned long flags = pgprot_val(prot) & _CACHE_MASK;
 	unsigned long offset, pfn, last_pfn;
 	struct vm_struct *area;
 	phys_addr_t last_addr;
diff --git a/arch/mips/mm/ioremap64.c b/arch/mips/mm/ioremap64.c
index 15e7820d6a5f..acc03ba20098 100644
--- a/arch/mips/mm/ioremap64.c
+++ b/arch/mips/mm/ioremap64.c
@@ -3,9 +3,9 @@
 #include <ioremap.h>
 
 void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
-		unsigned long prot_val)
+			   pgprot_t prot)
 {
-	unsigned long flags = prot_val & _CACHE_MASK;
+	unsigned long flags = pgprot_val(prot) & _CACHE_MASK;
 	u64 base = (flags == _CACHE_UNCACHED ? IO_BASE : UNCAC_BASE);
 	void __iomem *addr;
 
diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c
index 84dd5136d53a..e2cf2166d5cb 100644
--- a/arch/mips/mm/pgtable-32.c
+++ b/arch/mips/mm/pgtable-32.c
@@ -31,16 +31,6 @@ void pgd_init(void *addr)
 }
 
 #if defined(CONFIG_TRANSPARENT_HUGEPAGE)
-pmd_t mk_pmd(struct page *page, pgprot_t prot)
-{
-	pmd_t pmd;
-
-	pmd_val(pmd) = (page_to_pfn(page) << PFN_PTE_SHIFT) | pgprot_val(prot);
-
-	return pmd;
-}
-
-
 void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 		pmd_t *pmdp, pmd_t pmd)
 {
diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c
index 1e544827dea9..b24f865de357 100644
--- a/arch/mips/mm/pgtable-64.c
+++ b/arch/mips/mm/pgtable-64.c
@@ -90,15 +90,6 @@ void pud_init(void *addr)
 #endif
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
-pmd_t mk_pmd(struct page *page, pgprot_t prot)
-{
-	pmd_t pmd;
-
-	pmd_val(pmd) = (page_to_pfn(page) << PFN_PTE_SHIFT) | pgprot_val(prot);
-
-	return pmd;
-}
-
 void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 		pmd_t *pmdp, pmd_t pmd)
 {
diff --git a/arch/mips/mm/pgtable.c b/arch/mips/mm/pgtable.c
index 1506e458040d..10835414819f 100644
--- a/arch/mips/mm/pgtable.c
+++ b/arch/mips/mm/pgtable.c
@@ -10,12 +10,10 @@
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	pgd_t *init, *ret = NULL;
-	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL & ~__GFP_HIGHMEM,
-			PGD_TABLE_ORDER);
+	pgd_t *init, *ret;
 
-	if (ptdesc) {
-		ret = ptdesc_address(ptdesc);
+	ret = __pgd_alloc(mm, PGD_TABLE_ORDER);
+	if (ret) {
 		init = pgd_offset(&init_mm, 0UL);
 		pgd_init(ret);
 		memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
diff --git a/arch/mips/mm/physaddr.c b/arch/mips/mm/physaddr.c
index f9b8c85e9843..a6b1bf82057a 100644
--- a/arch/mips/mm/physaddr.c
+++ b/arch/mips/mm/physaddr.c
@@ -30,7 +30,7 @@ static inline bool __debug_virt_addr_valid(unsigned long x)
 phys_addr_t __virt_to_phys(volatile const void *x)
 {
 	WARN(!__debug_virt_addr_valid((unsigned long)x),
-	     "virt_to_phys used for non-linear address: %pK (%pS)\n",
+	     "virt_to_phys used for non-linear address: %p (%pS)\n",
 	     x, x);
 
 	return __virt_to_phys_nodebug(x);
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 76f3b9c0a9f0..44a662536148 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -12,9 +12,11 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/export.h>
+#include <linux/sort.h>
 
 #include <asm/cpu.h>
 #include <asm/cpu-type.h>
@@ -508,6 +510,97 @@ static int __init set_ntlb(char *str)
 
 __setup("ntlb=", set_ntlb);
 
+
+/* Comparison function for EntryHi VPN fields.  */
+static int r4k_vpn_cmp(const void *a, const void *b)
+{
+	long v = *(unsigned long *)a - *(unsigned long *)b;
+	int s = sizeof(long) > sizeof(int) ? sizeof(long) * 8 - 1: 0;
+	return s ? (v != 0) | v >> s : v;
+}
+
+/*
+ * Initialise all TLB entries with unique values that do not clash with
+ * what we have been handed over and what we'll be using ourselves.
+ */
+static void __ref r4k_tlb_uniquify(void)
+{
+	int tlbsize = current_cpu_data.tlbsize;
+	bool use_slab = slab_is_available();
+	int start = num_wired_entries();
+	phys_addr_t tlb_vpn_size;
+	unsigned long *tlb_vpns;
+	unsigned long vpn_mask;
+	int cnt, ent, idx, i;
+
+	vpn_mask = GENMASK(cpu_vmbits - 1, 13);
+	vpn_mask |= IS_ENABLED(CONFIG_64BIT) ? 3ULL << 62 : 1 << 31;
+
+	tlb_vpn_size = tlbsize * sizeof(*tlb_vpns);
+	tlb_vpns = (use_slab ?
+		    kmalloc(tlb_vpn_size, GFP_KERNEL) :
+		    memblock_alloc_raw(tlb_vpn_size, sizeof(*tlb_vpns)));
+	if (WARN_ON(!tlb_vpns))
+		return; /* Pray local_flush_tlb_all() is good enough. */
+
+	htw_stop();
+
+	for (i = start, cnt = 0; i < tlbsize; i++, cnt++) {
+		unsigned long vpn;
+
+		write_c0_index(i);
+		mtc0_tlbr_hazard();
+		tlb_read();
+		tlb_read_hazard();
+		vpn = read_c0_entryhi();
+		vpn &= vpn_mask & PAGE_MASK;
+		tlb_vpns[cnt] = vpn;
+
+		/* Prevent any large pages from overlapping regular ones.  */
+		write_c0_pagemask(read_c0_pagemask() & PM_DEFAULT_MASK);
+		mtc0_tlbw_hazard();
+		tlb_write_indexed();
+		tlbw_use_hazard();
+	}
+
+	sort(tlb_vpns, cnt, sizeof(tlb_vpns[0]), r4k_vpn_cmp, NULL);
+
+	write_c0_pagemask(PM_DEFAULT_MASK);
+	write_c0_entrylo0(0);
+	write_c0_entrylo1(0);
+
+	idx = 0;
+	ent = tlbsize;
+	for (i = start; i < tlbsize; i++)
+		while (1) {
+			unsigned long entryhi, vpn;
+
+			entryhi = UNIQUE_ENTRYHI(ent);
+			vpn = entryhi & vpn_mask & PAGE_MASK;
+
+			if (idx >= cnt || vpn < tlb_vpns[idx]) {
+				write_c0_entryhi(entryhi);
+				write_c0_index(i);
+				mtc0_tlbw_hazard();
+				tlb_write_indexed();
+				ent++;
+				break;
+			} else if (vpn == tlb_vpns[idx]) {
+				ent++;
+			} else {
+				idx++;
+			}
+		}
+
+	tlbw_use_hazard();
+	htw_start();
+	flush_micro_tlb();
+	if (use_slab)
+		kfree(tlb_vpns);
+	else
+		memblock_free(tlb_vpns, tlb_vpn_size);
+}
+
 /*
  * Configure TLB (for init or after a CPU has been powered off).
  */
@@ -547,6 +640,7 @@ static void r4k_tlb_configure(void)
 	temp_tlb_entry = current_cpu_data.tlbsize - 1;
 
 	/* From this point on the ARC firmware is dead.	 */
+	r4k_tlb_uniquify();
 	local_flush_tlb_all();
 
 	/* Did I tell you that ARC SUCKS?  */
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 000d6d50520a..82b0fd8576a2 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -241,16 +241,22 @@ mips_pci_controller:
 #endif
 
 		/*
-		 * Setup the Malta max (2GB) memory for PCI DMA in host bridge
-		 * in transparent addressing mode.
+		 * Set up memory mapping in host bridge for PCI DMA masters,
+		 * in transparent addressing mode.  For EVA use the Malta
+		 * maximum of 2 GiB memory in the alias space at 0x80000000
+		 * as per PHYS_OFFSET.  Otherwise use 256 MiB of memory in
+		 * the regular space, avoiding mapping the PCI MMIO window
+		 * for DMA as it seems to confuse the system controller's
+		 * logic, causing PCI MMIO to stop working.
 		 */
-		mask = PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_PREFETCH;
-		MSC_WRITE(MSC01_PCI_BAR0, mask);
-		MSC_WRITE(MSC01_PCI_HEAD4, mask);
+		mask = PHYS_OFFSET ? PHYS_OFFSET : 0xf0000000;
+		MSC_WRITE(MSC01_PCI_BAR0,
+			  mask | PCI_BASE_ADDRESS_MEM_PREFETCH);
+		MSC_WRITE(MSC01_PCI_HEAD4,
+			  PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_PREFETCH);
 
-		mask &= MSC01_PCI_BAR0_SIZE_MSK;
 		MSC_WRITE(MSC01_PCI_P2SCMSKL, mask);
-		MSC_WRITE(MSC01_PCI_P2SCMAPL, mask);
+		MSC_WRITE(MSC01_PCI_P2SCMAPL, PHYS_OFFSET);
 
 		/* Don't handle target retries indefinitely.  */
 		if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index 3a2836e9d856..816570514c37 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -47,7 +47,7 @@ static struct resource standard_io_resources[] = {
 		.name = "keyboard",
 		.start = 0x60,
 		.end = 0x6f,
-		.flags = IORESOURCE_IO | IORESOURCE_BUSY
+		.flags = IORESOURCE_IO
 	},
 	{
 		.name = "dma page reg",
@@ -213,7 +213,7 @@ void __init plat_mem_setup(void)
 
 	/* Request I/O space for devices used on the Malta board. */
 	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
-		request_resource(&ioport_resource, standard_io_resources+i);
+		insert_resource(&ioport_resource, standard_io_resources + i);
 
 	/*
 	 * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge.
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index 58625d1b6465..6bfee0f71803 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -304,7 +304,7 @@ static int alchemy_pci_def_idsel(unsigned int devsel, int assert)
 }
 
 /* save PCI controller register contents. */
-static int alchemy_pci_suspend(void)
+static int alchemy_pci_suspend(void *data)
 {
 	struct alchemy_pci_context *ctx = __alchemy_pci_ctx;
 	if (!ctx)
@@ -326,7 +326,7 @@ static int alchemy_pci_suspend(void)
 	return 0;
 }
 
-static void alchemy_pci_resume(void)
+static void alchemy_pci_resume(void *data)
 {
 	struct alchemy_pci_context *ctx = __alchemy_pci_ctx;
 	if (!ctx)
@@ -354,9 +354,13 @@ static void alchemy_pci_resume(void)
 	alchemy_pci_wired_entry(ctx);	/* install it */
 }
 
-static struct syscore_ops alchemy_pci_pmops = {
-	.suspend	= alchemy_pci_suspend,
-	.resume		= alchemy_pci_resume,
+static const struct syscore_ops alchemy_pci_syscore_ops = {
+	.suspend = alchemy_pci_suspend,
+	.resume = alchemy_pci_resume,
+};
+
+static struct syscore alchemy_pci_syscore = {
+	.ops = &alchemy_pci_syscore_ops,
 };
 
 static int alchemy_pci_probe(struct platform_device *pdev)
@@ -478,7 +482,7 @@ static int alchemy_pci_probe(struct platform_device *pdev)
 
 	__alchemy_pci_ctx = ctx;
 	platform_set_drvdata(pdev, ctx);
-	register_syscore_ops(&alchemy_pci_pmops);
+	register_syscore(&alchemy_pci_syscore);
 	register_pci_controller(&ctx->alchemy_pci_ctrl);
 
 	dev_info(&pdev->dev, "PCI controller at %ld MHz\n",
diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c
index a925842ee125..17fa97ec6ffb 100644
--- a/arch/mips/pci/pci-ar2315.c
+++ b/arch/mips/pci/pci-ar2315.c
@@ -469,8 +469,8 @@ static int ar2315_pci_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	apc->domain = irq_domain_add_linear(NULL, AR2315_PCI_IRQ_COUNT,
-					    &ar2315_pci_irq_domain_ops, apc);
+	apc->domain = irq_domain_create_linear(NULL, AR2315_PCI_IRQ_COUNT,
+					       &ar2315_pci_irq_domain_ops, apc);
 	if (!apc->domain) {
 		dev_err(dev, "failed to add IRQ domain\n");
 		return -ENOMEM;
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 68a8cefed420..0e85839b8225 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -234,7 +234,7 @@ static struct platform_driver ltq_pci_driver = {
 	},
 };
 
-int __init pcibios_init(void)
+static int __init pcibios_init(void)
 {
 	int ret = platform_driver_register(&ltq_pci_driver);
 	if (ret)
diff --git a/arch/mips/pci/pci-legacy.c b/arch/mips/pci/pci-legacy.c
index ec2567f8efd8..d04b7c1294b6 100644
--- a/arch/mips/pci/pci-legacy.c
+++ b/arch/mips/pci/pci-legacy.c
@@ -29,6 +29,14 @@ static LIST_HEAD(controllers);
 
 static int pci_initialized;
 
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	if (address > IO_SPACE_LIMIT)
+		return (unsigned long)-1;
+
+	return (unsigned long) address;
+}
+
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
@@ -241,45 +249,11 @@ static int __init pcibios_init(void)
 
 subsys_initcall(pcibios_init);
 
-static int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	pci_dev_for_each_resource(dev, r, idx) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1<<idx)))
-			continue;
-
-		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
-			continue;
-		if ((idx == PCI_ROM_RESOURCE) &&
-				(!(r->flags & IORESOURCE_ROM_ENABLE)))
-			continue;
-		if (!r->start && r->end) {
-			pci_err(dev,
-				"can't enable device: resource collisions\n");
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		pci_info(dev, "enabling device (%04x -> %04x)\n", old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	int err = pcibios_enable_resources(dev, mask);
+	int err;
 
+	err = pci_enable_resources(dev, mask);
 	if (err < 0)
 		return err;
 
diff --git a/arch/mips/pci/pci-malta.c b/arch/mips/pci/pci-malta.c
index 6aefdf20ca05..2e35aeba45bc 100644
--- a/arch/mips/pci/pci-malta.c
+++ b/arch/mips/pci/pci-malta.c
@@ -230,8 +230,7 @@ void __init mips_pcibios_init(void)
 	}
 
 	/* PIIX4 ACPI starts at 0x1000 */
-	if (controller->io_resource->start < 0x00001000UL)
-		controller->io_resource->start = 0x00001000UL;
+	PCIBIOS_MIN_IO = 0x1000;
 
 	iomem_resource.end &= 0xfffffffffULL;			/* 64 GB */
 	ioport_resource.end = controller->io_resource->end;
diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
index 1cada09fa5db..006e2bbab87e 100644
--- a/arch/mips/pci/pci-rt2880.c
+++ b/arch/mips/pci/pci-rt2880.c
@@ -264,7 +264,7 @@ static struct platform_driver rt288x_pci_driver = {
 	},
 };
 
-int __init pcibios_init(void)
+static int __init pcibios_init(void)
 {
 	int ret = platform_driver_register(&rt288x_pci_driver);
 
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index 4ac68a534e4f..14454ece485d 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -208,9 +208,10 @@ static int rt3883_pci_irq_init(struct device *dev,
 	rt3883_pci_w32(rpc, 0, RT3883_PCI_REG_PCIENA);
 
 	rpc->irq_domain =
-		irq_domain_add_linear(rpc->intc_of_node, RT3883_PCI_IRQ_COUNT,
-				      &rt3883_pci_irq_domain_ops,
-				      rpc);
+		irq_domain_create_linear(of_fwnode_handle(rpc->intc_of_node),
+					 RT3883_PCI_IRQ_COUNT,
+					 &rt3883_pci_irq_domain_ops,
+					 rpc);
 	if (!rpc->irq_domain) {
 		dev_err(dev, "unable to add IRQ domain\n");
 		return -ENODEV;
diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
index 45ddbaa6c123..e00c38620d14 100644
--- a/arch/mips/pci/pci-xtalk-bridge.c
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -620,7 +620,7 @@ static int bridge_probe(struct platform_device *pdev)
 	if (bridge_get_partnum(virt_to_phys((void *)bd->bridge_addr), partnum))
 		return -EPROBE_DEFER; /* not available yet */
 
-	parent = irq_get_default_host();
+	parent = irq_get_default_domain();
 	if (!parent)
 		return -ENODEV;
 	fn = irq_domain_alloc_named_fwnode("BRIDGE");
@@ -749,7 +749,7 @@ static void bridge_remove(struct platform_device *pdev)
 
 static struct platform_driver bridge_driver = {
 	.probe = bridge_probe,
-	.remove_new = bridge_remove,
+	.remove = bridge_remove,
 	.driver = {
 		.name = "xtalk-bridge",
 	}
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
index 46aef0a1b22a..955b36e89358 100644
--- a/arch/mips/ralink/irq.c
+++ b/arch/mips/ralink/irq.c
@@ -15,6 +15,7 @@
 
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
+#include <asm/time.h>
 
 #include "common.h"
 
@@ -176,7 +177,7 @@ static int __init intc_of_init(struct device_node *node,
 	/* route all INTC interrupts to MIPS HW0 interrupt */
 	rt_intc_w32(0, INTC_REG_TYPE);
 
-	domain = irq_domain_add_legacy(node, RALINK_INTC_IRQ_COUNT,
+	domain = irq_domain_create_legacy(of_fwnode_handle(node), RALINK_INTC_IRQ_COUNT,
 			RALINK_INTC_IRQ_BASE, 0, &irq_domain_ops, NULL);
 	if (!domain)
 		panic("Failed to add irqdomain");
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index ea6ebfea4a67..9aa5ef374465 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -105,13 +105,15 @@ static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
 /*
  * Set output GPIO level
  */
-static void rb532_gpio_set(struct gpio_chip *chip,
-				unsigned offset, int value)
+static int rb532_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			  int value)
 {
 	struct rb532_gpio_chip	*gpch;
 
 	gpch = gpiochip_get_data(chip);
 	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
+
+	return 0;
 }
 
 /*
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
index b88e89ec5894..8c370eb180ef 100644
--- a/arch/mips/rb532/prom.c
+++ b/arch/mips/rb532/prom.c
@@ -53,6 +53,7 @@ static void __init prom_setup_cmdline(void)
 	int prom_argc;
 	char **prom_argv;
 	int i;
+	size_t len;
 
 	prom_argc = fw_arg0;
 	prom_argv = (char **) fw_arg1;
@@ -82,20 +83,20 @@ static void __init prom_setup_cmdline(void)
 				mips_machtype = MACH_MIKROTIK_RB532;
 		}
 
-		strcpy(cp, prom_argv[i]);
-		cp += strlen(prom_argv[i]);
+		len = strlen(prom_argv[i]);
+		memcpy(cp, prom_argv[i], len + 1);
+		cp += len;
 	}
 	*(cp++) = ' ';
 
-	i = strlen(arcs_cmdline);
-	if (i > 0) {
+	len = strlen(arcs_cmdline);
+	if (len > 0) {
 		*(cp++) = ' ';
-		strcpy(cp, arcs_cmdline);
-		cp += strlen(arcs_cmdline);
+		memcpy(cp, arcs_cmdline, len + 1);
+		cp += len;
 	}
 	cmd_line[COMMAND_LINE_SIZE - 1] = '\0';
-
-	strcpy(arcs_cmdline, cmd_line);
+	strscpy(arcs_cmdline, cmd_line);
 }
 
 void __init prom_init(void)
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 0b2002e02a47..3a53690b4b33 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -221,3 +221,35 @@ static int __init sgi_ds1286_devinit(void)
 }
 
 device_initcall(sgi_ds1286_devinit);
+
+#define SGI_ZILOG_BASE	(HPC3_CHIP0_BASE + \
+			 offsetof(struct hpc3_regs, pbus_extregs[6]) + \
+			 offsetof(struct sgioc_regs, uart))
+
+static struct resource sgi_zilog_resources[] = {
+	{
+		.start	= SGI_ZILOG_BASE,
+		.end	= SGI_ZILOG_BASE + 15,
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.start	= SGI_SERIAL_IRQ,
+		.end	= SGI_SERIAL_IRQ,
+		.flags	= IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device zilog_device = {
+	.name		= "ip22zilog",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(sgi_zilog_resources),
+	.resource	= sgi_zilog_resources,
+};
+
+
+static int __init sgi_zilog_devinit(void)
+{
+	return platform_device_register(&zilog_device);
+}
+
+device_initcall(sgi_zilog_devinit);
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index 8f0861c58080..8539f562f5b8 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -98,7 +98,7 @@ static void blink_timeout(struct timer_list *unused)
 
 static void debounce(struct timer_list *unused)
 {
-	del_timer(&debounce_timer);
+	timer_delete(&debounce_timer);
 	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
 		/* Interrupt still being sent. */
 		debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s	*/
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index e06a818fe792..f083b25be13b 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 #include <linux/console.h>
 #include <linux/sched.h>
+#include <linux/string.h>
 #include <linux/tty.h>
 
 #include <asm/addrspace.h>
@@ -65,7 +66,7 @@ void __init plat_mem_setup(void)
 		static char options[8] __initdata;
 		char *baud = ArcGetEnvironmentVariable("dbaud");
 		if (baud)
-			strcpy(options, baud);
+			strscpy(options, baud);
 		add_preferred_console("ttyS", *(ctype + 1) == '2' ? 1 : 0,
 				      baud ? options : NULL);
 	} else if (!ctype || *ctype != 'g') {
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 00e63e9ef61d..20ef663af16e 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -165,7 +165,7 @@ static void hub_domain_free(struct irq_domain *domain,
 		return;
 
 	irqd = irq_domain_get_irq_data(domain, virq);
-	if (irqd && irqd->chip_data)
+	if (irqd)
 		kfree(irqd->chip_data);
 }
 
@@ -297,7 +297,7 @@ void __init arch_init_irq(void)
 	if (WARN_ON(domain == NULL))
 		return;
 
-	irq_set_default_host(domain);
+	irq_set_default_domain(domain);
 
 	irq_set_percpu_devid(IP27_HUB_PEND0_IRQ);
 	irq_set_chained_handler_and_data(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0,
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 1963313f55d8..2b3e46e2e607 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -406,8 +406,6 @@ void __init prom_meminit(void)
 	}
 }
 
-extern void setup_zero_pages(void);
-
 void __init paging_init(void)
 {
 	unsigned long zones_size[MAX_NR_ZONES] = {0, };
@@ -416,10 +414,3 @@ void __init paging_init(void)
 	zones_size[ZONE_NORMAL] = max_low_pfn;
 	free_area_init(zones_size);
 }
-
-void __init mem_init(void)
-{
-	high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT);
-	memblock_free_all();
-	setup_zero_pages();	/* This comes from node 0 */
-}
diff --git a/arch/mips/sgi-ip30/ip30-irq.c b/arch/mips/sgi-ip30/ip30-irq.c
index 423c32cb66ed..9fb905e2cf14 100644
--- a/arch/mips/sgi-ip30/ip30-irq.c
+++ b/arch/mips/sgi-ip30/ip30-irq.c
@@ -313,7 +313,7 @@ void __init arch_init_irq(void)
 	if (!domain)
 		return;
 
-	irq_set_default_host(domain);
+	irq_set_default_domain(domain);
 
 	irq_set_percpu_devid(IP30_HEART_L0_IRQ);
 	irq_set_chained_handler_and_data(IP30_HEART_L0_IRQ, ip30_normal_irq,
diff --git a/arch/mips/sgi-ip30/ip30-power.c b/arch/mips/sgi-ip30/ip30-power.c
index 120b3f3d5108..66851e17c5a7 100644
--- a/arch/mips/sgi-ip30/ip30-power.c
+++ b/arch/mips/sgi-ip30/ip30-power.c
@@ -3,7 +3,7 @@
  * ip30-power.c: Software powerdown and reset handling for IP30 architecture.
  *
  * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org>
- *               2014 Joshua Kinard <kumba@gentoo.org>
+ *               2014 Joshua Kinard <linux@kumba.dev>
  *               2009 Johannes Dickgreber <tanzy@gmx.de>
  */
 
diff --git a/arch/mips/sgi-ip30/ip30-setup.c b/arch/mips/sgi-ip30/ip30-setup.c
index e8547636a748..3fcb3ec9f802 100644
--- a/arch/mips/sgi-ip30/ip30-setup.c
+++ b/arch/mips/sgi-ip30/ip30-setup.c
@@ -3,7 +3,7 @@
  * SGI IP30 miscellaneous setup bits.
  *
  * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org>
- *               2007 Joshua Kinard <kumba@gentoo.org>
+ *               2007 Joshua Kinard <linux@kumba.dev>
  *               2009 Johannes Dickgreber <tanzy@gmx.de>
  */
 
diff --git a/arch/mips/sgi-ip30/ip30-smp.c b/arch/mips/sgi-ip30/ip30-smp.c
index 4bfe654602b1..1e8210f2a9f8 100644
--- a/arch/mips/sgi-ip30/ip30-smp.c
+++ b/arch/mips/sgi-ip30/ip30-smp.c
@@ -5,7 +5,7 @@
  * and smp-bmips.c.
  *
  * Copyright (C) 2005-2007 Stanislaw Skowronek <skylark@unaligned.org>
- *               2006-2007, 2014-2015 Joshua Kinard <kumba@gentoo.org>
+ *               2006-2007, 2014-2015 Joshua Kinard <linux@kumba.dev>
  *               2009 Johannes Dickgreber <tanzy@gmx.de>
  */
 
diff --git a/arch/mips/sgi-ip30/ip30-timer.c b/arch/mips/sgi-ip30/ip30-timer.c
index d13e105478ae..7652f72f0daf 100644
--- a/arch/mips/sgi-ip30/ip30-timer.c
+++ b/arch/mips/sgi-ip30/ip30-timer.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org>
  * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
- * Copyright (C) 2011 Joshua Kinard <kumba@gentoo.org>
+ * Copyright (C) 2011 Joshua Kinard <linux@kumba.dev>
  */
 
 #include <linux/clocksource.h>
diff --git a/arch/mips/sgi-ip30/ip30-xtalk.c b/arch/mips/sgi-ip30/ip30-xtalk.c
index 7ceb2b23ea1c..d798ee8c998c 100644
--- a/arch/mips/sgi-ip30/ip30-xtalk.c
+++ b/arch/mips/sgi-ip30/ip30-xtalk.c
@@ -3,7 +3,7 @@
  * ip30-xtalk.c - Very basic Crosstalk (XIO) detection support.
  *   Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org>
  *   Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
- *   Copyright (C) 2007, 2014-2016 Joshua Kinard <kumba@gentoo.org>
+ *   Copyright (C) 2007, 2014-2016 Joshua Kinard <linux@kumba.dev>
  */
 
 #include <linux/init.h>
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index aeb0805aae57..c2ebc4bbd866 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -14,6 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/param.h>
 #include <linux/sched.h>
+#include <linux/string.h>
 
 #include <asm/bootinfo.h>
 #include <asm/mipsregs.h>
@@ -90,7 +91,7 @@ void __init plat_mem_setup(void)
 			static char options[8] __initdata;
 			char *baud = ArcGetEnvironmentVariable("dbaud");
 			if (baud)
-				strcpy(options, baud);
+				strscpy(options, baud);
 			add_preferred_console("ttyS", *(con + 1) == '2' ? 1 : 0,
 					      baud ? options : NULL);
 		}
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 42fdb939c88d..fc7da12284f5 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -12,8 +12,8 @@
 #include <linux/init.h>
 #include <linux/export.h>
 #include <linux/console.h>
-#include <linux/fb.h>
 #include <linux/screen_info.h>
+#include <linux/string.h>
 
 #ifdef CONFIG_FW_ARC
 #include <asm/fw/arc/types.h>
@@ -81,7 +81,7 @@ static void __init sni_console_setup(void)
 			break;
 		}
 		if (baud)
-			strcpy(options, baud);
+			strscpy(options, baud);
 		if (strncmp(cdev, "tty552", 6) == 0)
 			add_preferred_console("ttyS", port,
 					      baud ? options : NULL);
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 1e67fecd466e..03f8a3a95637 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -200,7 +200,7 @@ static void __init preprocess_cmdline(void)
 	static char cmdline[COMMAND_LINE_SIZE] __initdata;
 	char *s;
 
-	strcpy(cmdline, arcs_cmdline);
+	strscpy(cmdline, arcs_cmdline);
 	s = cmdline;
 	arcs_cmdline[0] = '\0';
 	while (s && *s) {
@@ -270,7 +270,7 @@ void __init prom_init(void)
 	preprocess_cmdline();
 	select_board();
 
-	strcpy(txx9_system_type, txx9_board_vec->system);
+	strscpy(txx9_system_type, txx9_board_vec->system);
 
 	txx9_board_vec->prom_init();
 }
@@ -603,8 +603,8 @@ static int txx9_iocled_get(struct gpio_chip *chip, unsigned int offset)
 	return !!(data->cur_val & (1 << offset));
 }
 
-static void txx9_iocled_set(struct gpio_chip *chip, unsigned int offset,
-			    int value)
+static int txx9_iocled_set(struct gpio_chip *chip, unsigned int offset,
+			   int value)
 {
 	struct txx9_iocled_data *data = gpiochip_get_data(chip);
 	unsigned long flags;
@@ -616,6 +616,8 @@ static void txx9_iocled_set(struct gpio_chip *chip, unsigned int offset,
 	writeb(data->cur_val, data->mmioaddr);
 	mmiowb();
 	spin_unlock_irqrestore(&txx9_iocled_lock, flags);
+
+	return 0;
 }
 
 static int txx9_iocled_dir_in(struct gpio_chip *chip, unsigned int offset)
@@ -774,7 +776,7 @@ struct txx9_sramc_dev {
 };
 
 static ssize_t txx9_sram_read(struct file *filp, struct kobject *kobj,
-			      struct bin_attribute *bin_attr,
+			      const struct bin_attribute *bin_attr,
 			      char *buf, loff_t pos, size_t size)
 {
 	struct txx9_sramc_dev *dev = bin_attr->private;
@@ -789,7 +791,7 @@ static ssize_t txx9_sram_read(struct file *filp, struct kobject *kobj,
 }
 
 static ssize_t txx9_sram_write(struct file *filp, struct kobject *kobj,
-			       struct bin_attribute *bin_attr,
+			       const struct bin_attribute *bin_attr,
 			       char *buf, loff_t pos, size_t size)
 {
 	struct txx9_sramc_dev *dev = bin_attr->private;
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
index b289b2c1b294..69d4593f64fe 100644
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -2,7 +2,7 @@
 # Objects to go into the VDSO.
 
 # Include the generic Makefile to check the built vdso.
-include $(srctree)/lib/vdso/Makefile
+include $(srctree)/lib/vdso/Makefile.include
 
 obj-vdso-y := elf.o vgettimeofday.o sigreturn.o
 
@@ -27,6 +27,7 @@ endif
 # offsets.
 cflags-vdso := $(ccflags-vdso) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
+	$(filter -std=%,$(KBUILD_CFLAGS)) \
 	-O3 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \
 	-mrelax-pic-calls $(call cc-option, -mexplicit-relocs) \
 	-fno-stack-protector -fno-jump-tables -DDISABLE_BRANCH_PROFILING \
diff --git a/arch/mips/vdso/vdso.lds.S b/arch/mips/vdso/vdso.lds.S
index 836465e3bcb8..c8bbe56d89cb 100644
--- a/arch/mips/vdso/vdso.lds.S
+++ b/arch/mips/vdso/vdso.lds.S
@@ -5,6 +5,8 @@
  */
 
 #include <asm/sgidefs.h>
+#include <asm/vdso/vdso.h>
+#include <vdso/datapage.h>
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 OUTPUT_FORMAT("elf64-tradlittlemips", "elf64-tradbigmips", "elf64-tradlittlemips")
@@ -18,7 +20,8 @@ OUTPUT_ARCH(mips)
 
 SECTIONS
 {
-	PROVIDE(_start = .);
+	VDSO_VVAR_SYMS
+
 	. = SIZEOF_HEADERS;
 
 	/*
diff --git a/arch/nios2/Kbuild b/arch/nios2/Kbuild
index fc2952edd2de..fa64c5954b20 100644
--- a/arch/nios2/Kbuild
+++ b/arch/nios2/Kbuild
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
-obj-y += kernel/ mm/ platform/ boot/dts/
+obj-y += kernel/ mm/ platform/
 
 # for cleaning
 subdir- += boot
diff --git a/arch/nios2/boot/dts/Makefile b/arch/nios2/boot/dts/Makefile
index 1a2e8996bec7..1b8f41c4154f 100644
--- a/arch/nios2/boot/dts/Makefile
+++ b/arch/nios2/boot/dts/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
-obj-y := $(patsubst %.dts,%.dtb.o,$(CONFIG_NIOS2_DTB_SOURCE))
+dtb-y := $(addsuffix .dtb, $(CONFIG_BUILTIN_DTB_NAME))
 
-dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
+dtb-$(CONFIG_OF_ALL_DTBS) += $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
diff --git a/arch/nios2/configs/10m50_defconfig b/arch/nios2/configs/10m50_defconfig
index 048f74e0dc6d..b7224f44d327 100644
--- a/arch/nios2/configs/10m50_defconfig
+++ b/arch/nios2/configs/10m50_defconfig
@@ -51,7 +51,6 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_VT is not set
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_ALTERA_JTAGUART=y
diff --git a/arch/nios2/include/asm/entry.h b/arch/nios2/include/asm/entry.h
index bafb7b2ca59f..cb25ed56450a 100644
--- a/arch/nios2/include/asm/entry.h
+++ b/arch/nios2/include/asm/entry.h
@@ -10,7 +10,7 @@
 #ifndef _ASM_NIOS2_ENTRY_H
 #define _ASM_NIOS2_ENTRY_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #include <asm/processor.h>
 #include <asm/registers.h>
@@ -117,5 +117,5 @@
 	addi	sp, sp, SWITCH_STACK_SIZE
 .endm
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_NIOS2_ENTRY_H */
diff --git a/arch/nios2/include/asm/page.h b/arch/nios2/include/asm/page.h
index 2897ec1b74f6..00a51623d38a 100644
--- a/arch/nios2/include/asm/page.h
+++ b/arch/nios2/include/asm/page.h
@@ -26,7 +26,7 @@
 #define PAGE_OFFSET	\
 	(CONFIG_NIOS2_MEM_BASE + CONFIG_NIOS2_KERNEL_REGION_BASE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * This gives the physical RAM offset.
@@ -90,6 +90,6 @@ extern struct page *mem_map;
 
 #include <asm-generic/getorder.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_NIOS2_PAGE_H */
diff --git a/arch/nios2/include/asm/pgalloc.h b/arch/nios2/include/asm/pgalloc.h
index ce6bb8e74271..db122b093a8b 100644
--- a/arch/nios2/include/asm/pgalloc.h
+++ b/arch/nios2/include/asm/pgalloc.h
@@ -28,10 +28,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
 
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
 
-#define __pte_free_tlb(tlb, pte, addr)					\
-	do {								\
-		pagetable_pte_dtor(page_ptdesc(pte));			\
-		tlb_remove_page_ptdesc((tlb), (page_ptdesc(pte)));	\
-	} while (0)
+#define __pte_free_tlb(tlb, pte, addr)	\
+	tlb_remove_ptdesc((tlb), page_ptdesc(pte))
 
 #endif /* _ASM_NIOS2_PGALLOC_H */
diff --git a/arch/nios2/include/asm/pgtable.h b/arch/nios2/include/asm/pgtable.h
index eab87c6beacb..844dce55569f 100644
--- a/arch/nios2/include/asm/pgtable.h
+++ b/arch/nios2/include/asm/pgtable.h
@@ -221,12 +221,6 @@ static inline void pte_clear(struct mm_struct *mm,
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
  */
-#define mk_pte(page, prot)	(pfn_pte(page_to_pfn(page), prot))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
 #define pmd_phys(pmd)		virt_to_phys((void *)pmd_val(pmd))
 #define pmd_pfn(pmd)		(pmd_phys(pmd) >> PAGE_SHIFT)
 #define pmd_page(pmd)		(pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
@@ -265,7 +259,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 #define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -291,4 +285,20 @@ void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
 #define update_mmu_cache(vma, addr, ptep) \
 	update_mmu_cache_range(NULL, vma, addr, ptep, 1)
 
+static inline int pte_same(pte_t pte_a, pte_t pte_b);
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline int ptep_set_access_flags(struct vm_area_struct *vma,
+					unsigned long address, pte_t *ptep,
+					pte_t entry, int dirty)
+{
+	if (!pte_same(*ptep, entry))
+		set_ptes(vma->vm_mm, address, ptep, entry, 1);
+	/*
+	 * update_mmu_cache will unconditionally execute, handling both
+	 * the case that the PTE changed and the spurious fault case.
+	 */
+	return true;
+}
+
 #endif /* _ASM_NIOS2_PGTABLE_H */
diff --git a/arch/nios2/include/asm/processor.h b/arch/nios2/include/asm/processor.h
index eb44130364a9..d9521c3c2df9 100644
--- a/arch/nios2/include/asm/processor.h
+++ b/arch/nios2/include/asm/processor.h
@@ -36,7 +36,7 @@
 /* Kuser helpers is mapped to this user space address */
 #define KUSER_BASE		0x1000
 #define KUSER_SIZE		(PAGE_SIZE)
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 # define TASK_SIZE		0x7FFF0000UL
 # define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
@@ -72,6 +72,6 @@ extern unsigned long __get_wchan(struct task_struct *p);
 
 #define cpu_relax()	barrier()
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_NIOS2_PROCESSOR_H */
diff --git a/arch/nios2/include/asm/ptrace.h b/arch/nios2/include/asm/ptrace.h
index 9da34c3022a2..96cbcd40c7ce 100644
--- a/arch/nios2/include/asm/ptrace.h
+++ b/arch/nios2/include/asm/ptrace.h
@@ -18,7 +18,7 @@
 /* This struct defines the way the registers are stored on the
    stack during a system call.  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 struct pt_regs {
 	unsigned long  r8;	/* r8-r15 Caller-saved GP registers */
 	unsigned long  r9;
@@ -78,5 +78,5 @@ extern void show_regs(struct pt_regs *);
 
 int do_syscall_trace_enter(void);
 void do_syscall_trace_exit(void);
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_NIOS2_PTRACE_H */
diff --git a/arch/nios2/include/asm/registers.h b/arch/nios2/include/asm/registers.h
index 95b67dd16f81..165dab26221f 100644
--- a/arch/nios2/include/asm/registers.h
+++ b/arch/nios2/include/asm/registers.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_NIOS2_REGISTERS_H
 #define _ASM_NIOS2_REGISTERS_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/cpuinfo.h>
 #endif
 
@@ -44,7 +44,7 @@
 
 /* tlbmisc register bits */
 #define TLBMISC_PID_SHIFT	4
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define TLBMISC_PID_MASK	((1UL << cpuinfo.tlb_pid_num_bits) - 1)
 #endif
 #define TLBMISC_WAY_MASK	0xf
diff --git a/arch/nios2/include/asm/setup.h b/arch/nios2/include/asm/setup.h
index 908a1526d1bd..6d3f26a71cb5 100644
--- a/arch/nios2/include/asm/setup.h
+++ b/arch/nios2/include/asm/setup.h
@@ -8,7 +8,7 @@
 
 #include <asm-generic/setup.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifdef __KERNEL__
 
 extern char exception_handler_hook[];
@@ -18,6 +18,6 @@ extern char fast_handler_end[];
 extern void pagetable_init(void);
 
 #endif/* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_NIOS2_SETUP_H */
diff --git a/arch/nios2/include/asm/syscall.h b/arch/nios2/include/asm/syscall.h
index fff52205fb65..8e3eb1d689bb 100644
--- a/arch/nios2/include/asm/syscall.h
+++ b/arch/nios2/include/asm/syscall.h
@@ -15,6 +15,11 @@ static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 	return regs->r2;
 }
 
+static inline void syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr)
+{
+	regs->r2 = nr;
+}
+
 static inline void syscall_rollback(struct task_struct *task,
 				struct pt_regs *regs)
 {
@@ -58,6 +63,17 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	*args   = regs->r9;
 }
 
+static inline void syscall_set_arguments(struct task_struct *task,
+	struct pt_regs *regs, const unsigned long *args)
+{
+	regs->r4 = *args++;
+	regs->r5 = *args++;
+	regs->r6 = *args++;
+	regs->r7 = *args++;
+	regs->r8 = *args++;
+	regs->r9 = *args;
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	return AUDIT_ARCH_NIOS2;
diff --git a/arch/nios2/include/asm/syscalls.h b/arch/nios2/include/asm/syscalls.h
index b4d4ed3bf9c8..0e214b0a0ac8 100644
--- a/arch/nios2/include/asm/syscalls.h
+++ b/arch/nios2/include/asm/syscalls.h
@@ -7,6 +7,7 @@
 
 int sys_cacheflush(unsigned long addr, unsigned long len,
 				unsigned int op);
+asmlinkage long __sys_clone3(struct clone_args __user *uargs, size_t size);
 
 #include <asm-generic/syscalls.h>
 
diff --git a/arch/nios2/include/asm/thread_info.h b/arch/nios2/include/asm/thread_info.h
index 5abac9893b32..83df79286d62 100644
--- a/arch/nios2/include/asm/thread_info.h
+++ b/arch/nios2/include/asm/thread_info.h
@@ -24,7 +24,7 @@
 #define THREAD_SIZE_ORDER	1
 #define THREAD_SIZE		8192 /* 2 * PAGE_SIZE */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * low level task data that entry.S needs immediate access to
@@ -61,7 +61,7 @@ static inline struct thread_info *current_thread_info(void)
 
 	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
 }
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * thread information flags
diff --git a/arch/nios2/include/asm/traps.h b/arch/nios2/include/asm/traps.h
index afd77bef01c6..133a3dedbc3e 100644
--- a/arch/nios2/include/asm/traps.h
+++ b/arch/nios2/include/asm/traps.h
@@ -12,7 +12,7 @@
 
 #define TRAP_ID_SYSCALL		0
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 void _exception(int signo, struct pt_regs *regs, int code, unsigned long addr);
 void do_page_fault(struct pt_regs *regs, unsigned long cause,
 		   unsigned long address);
diff --git a/arch/nios2/include/asm/uaccess.h b/arch/nios2/include/asm/uaccess.h
index b8299082adbe..6ccc9a232c23 100644
--- a/arch/nios2/include/asm/uaccess.h
+++ b/arch/nios2/include/asm/uaccess.h
@@ -172,15 +172,15 @@ do {									\
 
 #define __put_user(x, ptr)						\
 ({									\
-	__auto_type __pu_ptr = (ptr);					\
-	typeof(*__pu_ptr) __pu_val = (typeof(*__pu_ptr))(x);		\
+	auto __pu_ptr = (ptr);						\
+	auto __pu_val = (typeof(*__pu_ptr))(x);				\
 	__put_user_common(__pu_val, __pu_ptr);				\
 })
 
 #define put_user(x, ptr)						\
 ({									\
-	__auto_type __pu_ptr = (ptr);					\
-	typeof(*__pu_ptr) __pu_val = (typeof(*__pu_ptr))(x);		\
+	auto __pu_ptr = (ptr);						\
+	auto __pu_val = (typeof(*__pu_ptr))(x);				\
 	access_ok(__pu_ptr, sizeof(*__pu_ptr)) ?			\
 		__put_user_common(__pu_val, __pu_ptr) :			\
 		-EFAULT;						\
diff --git a/arch/nios2/include/asm/unistd.h b/arch/nios2/include/asm/unistd.h
index 1146e56473c5..213f6de3cf7b 100644
--- a/arch/nios2/include/asm/unistd.h
+++ b/arch/nios2/include/asm/unistd.h
@@ -7,6 +7,4 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SET_GET_RLIMIT
 
-#define __ARCH_BROKEN_SYS_CLONE3
-
 #endif
diff --git a/arch/nios2/include/uapi/asm/ptrace.h b/arch/nios2/include/uapi/asm/ptrace.h
index 2b91dbe5bcfe..1298db9f0fc9 100644
--- a/arch/nios2/include/uapi/asm/ptrace.h
+++ b/arch/nios2/include/uapi/asm/ptrace.h
@@ -13,7 +13,7 @@
 #ifndef _UAPI_ASM_NIOS2_PTRACE_H
 #define _UAPI_ASM_NIOS2_PTRACE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 
@@ -80,5 +80,5 @@ struct user_pt_regs {
 	__u32		regs[49];
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _UAPI_ASM_NIOS2_PTRACE_H */
diff --git a/arch/nios2/kernel/Makefile b/arch/nios2/kernel/Makefile
index 78a913181fa1..4dce965a7b73 100644
--- a/arch/nios2/kernel/Makefile
+++ b/arch/nios2/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the nios2 linux kernel.
 #
 
-extra-y	+= vmlinux.lds
+always-$(KBUILD_BUILTIN)	+= vmlinux.lds
 
 obj-y	+= head.o
 obj-y	+= cpuinfo.o
diff --git a/arch/nios2/kernel/asm-offsets.c b/arch/nios2/kernel/asm-offsets.c
index e3d9b7b6fb48..88190b503ce5 100644
--- a/arch/nios2/kernel/asm-offsets.c
+++ b/arch/nios2/kernel/asm-offsets.c
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
  */
+#define COMPILE_OFFSETS
 
 #include <linux/stddef.h>
 #include <linux/sched.h>
diff --git a/arch/nios2/kernel/cpuinfo.c b/arch/nios2/kernel/cpuinfo.c
index 338849c430a5..55882feb6249 100644
--- a/arch/nios2/kernel/cpuinfo.c
+++ b/arch/nios2/kernel/cpuinfo.c
@@ -46,10 +46,7 @@ void __init setup_cpuinfo(void)
 	cpuinfo.cpu_clock_freq = fcpu(cpu, "clock-frequency");
 
 	str = of_get_property(cpu, "altr,implementation", &len);
-	if (str)
-		strscpy(cpuinfo.cpu_impl, str, sizeof(cpuinfo.cpu_impl));
-	else
-		strcpy(cpuinfo.cpu_impl, "<unknown>");
+	strscpy(cpuinfo.cpu_impl, str ?: "<unknown>");
 
 	cpuinfo.has_div = of_property_read_bool(cpu, "altr,has-div");
 	cpuinfo.has_mul = of_property_read_bool(cpu, "altr,has-mul");
@@ -143,11 +140,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		   " DIV:\t\t%s\n"
 		   " BMX:\t\t%s\n"
 		   " CDX:\t\t%s\n",
-		   cpuinfo.has_mul ? "yes" : "no",
-		   cpuinfo.has_mulx ? "yes" : "no",
-		   cpuinfo.has_div ? "yes" : "no",
-		   cpuinfo.has_bmx ? "yes" : "no",
-		   cpuinfo.has_cdx ? "yes" : "no");
+		   str_yes_no(cpuinfo.has_mul),
+		   str_yes_no(cpuinfo.has_mulx),
+		   str_yes_no(cpuinfo.has_div),
+		   str_yes_no(cpuinfo.has_bmx),
+		   str_yes_no(cpuinfo.has_cdx));
 
 	seq_printf(m,
 		   "Icache:\t\t%ukB, line length: %u\n",
diff --git a/arch/nios2/kernel/entry.S b/arch/nios2/kernel/entry.S
index 99f0a65e6234..dd40dfd908e5 100644
--- a/arch/nios2/kernel/entry.S
+++ b/arch/nios2/kernel/entry.S
@@ -403,6 +403,12 @@ ENTRY(sys_clone)
 	addi    sp, sp, 4
 	RESTORE_SWITCH_STACK
 	ret
+/* long syscall(SYS_clone3, struct clone_args *cl_args, size_t size); */
+ENTRY(__sys_clone3)
+	SAVE_SWITCH_STACK
+	call	sys_clone3
+	RESTORE_SWITCH_STACK
+	ret
 
 ENTRY(sys_rt_sigreturn)
 	SAVE_SWITCH_STACK
diff --git a/arch/nios2/kernel/irq.c b/arch/nios2/kernel/irq.c
index 6b7890e5f7af..73568d8e21e0 100644
--- a/arch/nios2/kernel/irq.c
+++ b/arch/nios2/kernel/irq.c
@@ -69,10 +69,11 @@ void __init init_IRQ(void)
 
 	BUG_ON(!node);
 
-	domain = irq_domain_add_linear(node, NIOS2_CPU_NR_IRQS, &irq_ops, NULL);
+	domain = irq_domain_create_linear(of_fwnode_handle(node),
+					  NIOS2_CPU_NR_IRQS, &irq_ops, NULL);
 	BUG_ON(!domain);
 
-	irq_set_default_host(domain);
+	irq_set_default_domain(domain);
 	of_node_put(node);
 	/* Load the initial ienable value */
 	ienable = RDCTL(CTL_IENABLE);
diff --git a/arch/nios2/kernel/process.c b/arch/nios2/kernel/process.c
index f84021303f6a..151404139085 100644
--- a/arch/nios2/kernel/process.c
+++ b/arch/nios2/kernel/process.c
@@ -101,7 +101,7 @@ void flush_thread(void)
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *childregs = task_pt_regs(p);
diff --git a/arch/nios2/kernel/prom.c b/arch/nios2/kernel/prom.c
index db049249766f..4f8c14da6490 100644
--- a/arch/nios2/kernel/prom.c
+++ b/arch/nios2/kernel/prom.c
@@ -32,7 +32,7 @@ void __init early_init_devtree(void *params)
 	}
 #endif
 
-#ifdef CONFIG_NIOS2_DTB_SOURCE_BOOL
+#ifdef CONFIG_BUILTIN_DTB
 	if (be32_to_cpu((__be32) *dtb) == OF_DT_HEADER)
 		params = (void *)__dtb_start;
 #endif
diff --git a/arch/nios2/kernel/ptrace.c b/arch/nios2/kernel/ptrace.c
index 9221c15972e6..c88f5cabc0c1 100644
--- a/arch/nios2/kernel/ptrace.c
+++ b/arch/nios2/kernel/ptrace.c
@@ -95,7 +95,7 @@ enum nios2_regset {
 
 static const struct user_regset nios2_regsets[] = {
 	[REGSET_GENERAL] = {
-		.core_note_type = NT_PRSTATUS,
+		USER_REGSET_NOTE_TYPE(PRSTATUS),
 		.n = NUM_PTRACE_REG,
 		.size = sizeof(unsigned long),
 		.align = sizeof(unsigned long),
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index da122a5fa43b..f43f01c4ab93 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -142,6 +142,20 @@ static void __init find_limits(unsigned long *min, unsigned long *max_low,
 	*max_high = PFN_DOWN(memblock_end_of_DRAM());
 }
 
+static void __init adjust_lowmem_bounds(void)
+{
+	phys_addr_t block_start, block_end;
+	u64 i;
+	phys_addr_t memblock_limit = 0;
+
+	for_each_mem_range(i, &block_start, &block_end) {
+		if (block_end > memblock_limit)
+			memblock_limit = block_end;
+	}
+
+	memblock_set_current_limit(memblock_limit);
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	console_verbose();
@@ -149,14 +163,16 @@ void __init setup_arch(char **cmdline_p)
 	memory_start = memblock_start_of_DRAM();
 	memory_end = memblock_end_of_DRAM();
 
+	pr_debug("%s: start=%lx, end=%lx\n", __func__, memory_start, memory_end);
+
 	setup_initial_init_mm(_stext, _etext, _edata, _end);
 	init_task.thread.kregs = &fake_regs;
 
 	/* Keep a copy of command line */
 	*cmdline_p = boot_command_line;
 
+	adjust_lowmem_bounds();
 	find_limits(&min_low_pfn, &max_low_pfn, &max_pfn);
-	max_mapnr = max_low_pfn;
 
 	memblock_reserve(__pa_symbol(_stext), _end - _stext);
 #ifdef CONFIG_BLK_DEV_INITRD
diff --git a/arch/nios2/kernel/syscall_table.c b/arch/nios2/kernel/syscall_table.c
index 434694067d8f..c99818aac9e1 100644
--- a/arch/nios2/kernel/syscall_table.c
+++ b/arch/nios2/kernel/syscall_table.c
@@ -13,6 +13,7 @@
 #define __SYSCALL_WITH_COMPAT(nr, native, compat)        __SYSCALL(nr, native)
 
 #define sys_mmap2 sys_mmap_pgoff
+#define sys_clone3 __sys_clone3
 
 void *sys_call_table[__NR_syscalls] = {
 	[0 ... __NR_syscalls-1] = sys_ni_syscall,
diff --git a/arch/nios2/mm/cacheflush.c b/arch/nios2/mm/cacheflush.c
index 0ee9c5f02e08..8321182eb927 100644
--- a/arch/nios2/mm/cacheflush.c
+++ b/arch/nios2/mm/cacheflush.c
@@ -187,7 +187,7 @@ void flush_dcache_folio(struct folio *folio)
 
 	/* Flush this page if there are aliases. */
 	if (mapping && !mapping_mapped(mapping)) {
-		clear_bit(PG_dcache_clean, &folio->flags);
+		clear_bit(PG_dcache_clean, &folio->flags.f);
 	} else {
 		__flush_dcache_folio(folio);
 		if (mapping) {
@@ -195,7 +195,7 @@ void flush_dcache_folio(struct folio *folio)
 			flush_aliases(mapping, folio);
 			flush_icache_range(start, start + folio_size(folio));
 		}
-		set_bit(PG_dcache_clean, &folio->flags);
+		set_bit(PG_dcache_clean, &folio->flags.f);
 	}
 }
 EXPORT_SYMBOL(flush_dcache_folio);
@@ -227,7 +227,7 @@ void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
 		return;
 
 	folio = page_folio(pfn_to_page(pfn));
-	if (!test_and_set_bit(PG_dcache_clean, &folio->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &folio->flags.f))
 		__flush_dcache_folio(folio);
 
 	mapping = folio_flush_mapping(folio);
diff --git a/arch/nios2/mm/init.c b/arch/nios2/mm/init.c
index a2278485de19..94efa3de3933 100644
--- a/arch/nios2/mm/init.c
+++ b/arch/nios2/mm/init.c
@@ -51,7 +51,7 @@ void __init paging_init(void)
 	pagetable_init();
 	pgd_current = swapper_pg_dir;
 
-	max_zone_pfn[ZONE_NORMAL] = max_mapnr;
+	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
 
 	/* pass the memory from the bootmem allocator to the main allocator */
 	free_area_init(max_zone_pfn);
@@ -60,20 +60,6 @@ void __init paging_init(void)
 			(unsigned long)empty_zero_page + PAGE_SIZE);
 }
 
-void __init mem_init(void)
-{
-	unsigned long end_mem   = memory_end; /* this must not include
-						kernel stack at top */
-
-	pr_debug("mem_init: start=%lx, end=%lx\n", memory_start, memory_end);
-
-	end_mem &= PAGE_MASK;
-	high_memory = __va(end_mem);
-
-	/* this will put all memory onto the freelists */
-	memblock_free_all();
-}
-
 void __init mmu_init(void)
 {
 	flush_tlb_all();
diff --git a/arch/nios2/mm/pgtable.c b/arch/nios2/mm/pgtable.c
index 7c76e8a7447a..6470ed378782 100644
--- a/arch/nios2/mm/pgtable.c
+++ b/arch/nios2/mm/pgtable.c
@@ -11,6 +11,7 @@
 #include <linux/sched.h>
 
 #include <asm/cpuinfo.h>
+#include <asm/pgalloc.h>
 
 /* pteaddr:
  *   ptbase | vpn* | zero
@@ -54,7 +55,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *ret, *init;
 
-	ret = (pgd_t *) __get_free_page(GFP_KERNEL);
+	ret = __pgd_alloc(mm, 0);
 	if (ret) {
 		init = pgd_offset(&init_mm, 0UL);
 		pgd_init(ret);
diff --git a/arch/nios2/mm/tlb.c b/arch/nios2/mm/tlb.c
index f90ac35f05f3..a9cbe20f9e79 100644
--- a/arch/nios2/mm/tlb.c
+++ b/arch/nios2/mm/tlb.c
@@ -144,10 +144,11 @@ static void flush_tlb_one(unsigned long addr)
 		if (((pteaddr >> 2) & 0xfffff) != (addr >> PAGE_SHIFT))
 			continue;
 
+		tlbmisc = RDCTL(CTL_TLBMISC);
 		pr_debug("Flush entry by writing way=%dl pid=%ld\n",
-			 way, (pid_misc >> TLBMISC_PID_SHIFT));
+			 way, ((tlbmisc >> TLBMISC_PID_SHIFT) & TLBMISC_PID_MASK));
 
-		tlbmisc = TLBMISC_WE | (way << TLBMISC_WAY_SHIFT);
+		tlbmisc = TLBMISC_WE | (way << TLBMISC_WAY_SHIFT) | (tlbmisc & TLBMISC_PID);
 		WRCTL(CTL_TLBMISC, tlbmisc);
 		WRCTL(CTL_PTEADDR, pteaddr_invalid(addr));
 		WRCTL(CTL_TLBACC, 0);
@@ -237,7 +238,8 @@ void flush_tlb_pid(unsigned long mmu_pid)
 			if (pid != mmu_pid)
 				continue;
 
-			tlbmisc = TLBMISC_WE | (way << TLBMISC_WAY_SHIFT);
+			tlbmisc = TLBMISC_WE | (way << TLBMISC_WAY_SHIFT) |
+				  (pid << TLBMISC_PID_SHIFT);
 			WRCTL(CTL_TLBMISC, tlbmisc);
 			WRCTL(CTL_TLBACC, 0);
 		}
@@ -272,15 +274,17 @@ void flush_tlb_all(void)
 	/* remember pid/way until we return */
 	get_misc_and_pid(&org_misc, &pid_misc);
 
-	/* Start at way 0, way is auto-incremented after each TLBACC write */
-	WRCTL(CTL_TLBMISC, TLBMISC_WE);
-
 	/* Map each TLB entry to physcal address 0 with no-access and a
 	   bad ptbase */
 	for (line = 0; line < cpuinfo.tlb_num_lines; line++) {
 		WRCTL(CTL_PTEADDR, pteaddr_invalid(addr));
-		for (way = 0; way < cpuinfo.tlb_num_ways; way++)
+		for (way = 0; way < cpuinfo.tlb_num_ways; way++) {
+			// Code such as replace_tlb_one_pid assumes that no duplicate entries exist
+			// for a single address across ways, so also use way as a dummy PID
+			WRCTL(CTL_TLBMISC, TLBMISC_WE | (way << TLBMISC_WAY_SHIFT) |
+					   (way << TLBMISC_PID_SHIFT));
 			WRCTL(CTL_TLBACC, 0);
+		}
 
 		addr += PAGE_SIZE;
 	}
diff --git a/arch/nios2/platform/Kconfig.platform b/arch/nios2/platform/Kconfig.platform
index e849daff6fd1..c75cadd92388 100644
--- a/arch/nios2/platform/Kconfig.platform
+++ b/arch/nios2/platform/Kconfig.platform
@@ -35,19 +35,20 @@ config NIOS2_DTB_PHYS_ADDR
 	help
 	  Physical address of a dtb blob.
 
-config NIOS2_DTB_SOURCE_BOOL
+config BUILTIN_DTB
 	bool "Compile and link device tree into kernel image"
 	depends on !COMPILE_TEST
+	select GENERIC_BUILTIN_DTB
 	help
 	  This allows you to specify a dts (device tree source) file
 	  which will be compiled and linked into the kernel image.
 
-config NIOS2_DTB_SOURCE
-	string "Device tree source file"
-	depends on NIOS2_DTB_SOURCE_BOOL
+config BUILTIN_DTB_NAME
+	string "Built-in device tree name"
+	depends on BUILTIN_DTB
 	default ""
 	help
-	  Absolute path to the device tree source (dts) file describing your
+	  Relative path to the device tree without suffix describing your
 	  system.
 
 comment "Nios II instructions"
diff --git a/arch/openrisc/Kbuild b/arch/openrisc/Kbuild
index b0b0f2b03f87..70bdb24ff204 100644
--- a/arch/openrisc/Kbuild
+++ b/arch/openrisc/Kbuild
@@ -1,6 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y += lib/ kernel/ mm/
-obj-y += boot/dts/
 
 # for cleaning
 subdir- += boot
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 3279ef457c57..9156635dd264 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -10,6 +10,7 @@ config OPENRISC
 	select ARCH_HAS_DMA_SET_UNCACHED
 	select ARCH_HAS_DMA_CLEAR_UNCACHED
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select GENERIC_BUILTIN_DTB
 	select COMMON_CLK
 	select OF
 	select OF_EARLY_FLATTREE
@@ -23,9 +24,13 @@ config OPENRISC
 	select GENERIC_PCI_IOMAP
 	select GENERIC_IOREMAP
 	select GENERIC_CPU_DEVICES
+	select HAVE_ARCH_JUMP_LABEL
+	select HAVE_ARCH_JUMP_LABEL_RELATIVE
 	select HAVE_PCI
 	select HAVE_UID16
 	select HAVE_PAGE_SIZE_8KB
+	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RSEQ
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select GENERIC_SMP_IDLE_THREAD
@@ -92,7 +97,7 @@ config DCACHE_WRITETHROUGH
 
 	  If unsure say N here
 
-config OPENRISC_BUILTIN_DTB
+config BUILTIN_DTB_NAME
 	string "Builtin DTB"
 	default ""
 
diff --git a/arch/openrisc/boot/dts/Makefile b/arch/openrisc/boot/dts/Makefile
index 13db5a2aab52..3a66e0ef3985 100644
--- a/arch/openrisc/boot/dts/Makefile
+++ b/arch/openrisc/boot/dts/Makefile
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-y += $(addsuffix .dtb.o, $(CONFIG_OPENRISC_BUILTIN_DTB))
+dtb-y += $(addsuffix .dtb, $(CONFIG_BUILTIN_DTB_NAME))
 
 #DTC_FLAGS ?= -p 1024
diff --git a/arch/openrisc/configs/or1klitex_defconfig b/arch/openrisc/configs/or1klitex_defconfig
index 466f31a091be..fb1eb9a68bd6 100644
--- a/arch/openrisc/configs/or1klitex_defconfig
+++ b/arch/openrisc/configs/or1klitex_defconfig
@@ -7,7 +7,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SGETMASK_SYSCALL=y
 CONFIG_EXPERT=y
-CONFIG_OPENRISC_BUILTIN_DTB="or1klitex"
+CONFIG_BUILTIN_DTB_NAME="or1klitex"
 CONFIG_HZ_100=y
 CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y
 CONFIG_NET=y
@@ -38,7 +38,7 @@ CONFIG_MMC_LITEX=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_LITEX_SOC_CONTROLLER=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_EXFAT_FS=y
diff --git a/arch/openrisc/configs/or1ksim_defconfig b/arch/openrisc/configs/or1ksim_defconfig
index 0116e465238f..769705ac24d5 100644
--- a/arch/openrisc/configs/or1ksim_defconfig
+++ b/arch/openrisc/configs/or1ksim_defconfig
@@ -3,26 +3,23 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_GZIP is not set
 CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
 # CONFIG_EPOLL is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
+# CONFIG_KALLSYMS is not set
+CONFIG_BUILTIN_DTB_NAME="or1ksim"
+CONFIG_HZ_100=y
+CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 # CONFIG_BLOCK is not set
-CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
-CONFIG_HZ_100=y
+CONFIG_SLUB_TINY=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 CONFIG_TCP_CONG_ADVANCED=y
 # CONFIG_TCP_CONG_BIC is not set
@@ -35,7 +32,6 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-CONFIG_PROC_DEVICETREE=y
 CONFIG_NETDEVICES=y
 CONFIG_ETHOC=y
 CONFIG_MICREL_PHY=y
@@ -53,4 +49,3 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/openrisc/configs/simple_smp_defconfig b/arch/openrisc/configs/simple_smp_defconfig
index b990cb6c9309..6008e824d31c 100644
--- a/arch/openrisc/configs/simple_smp_defconfig
+++ b/arch/openrisc/configs/simple_smp_defconfig
@@ -20,7 +20,7 @@ CONFIG_SLUB=y
 CONFIG_SLUB_TINY=y
 CONFIG_MODULES=y
 # CONFIG_BLOCK is not set
-CONFIG_OPENRISC_BUILTIN_DTB="simple_smp"
+CONFIG_BUILTIN_DTB_NAME="simple_smp"
 CONFIG_SMP=y
 CONFIG_HZ_100=y
 CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y
diff --git a/arch/openrisc/configs/virt_defconfig b/arch/openrisc/configs/virt_defconfig
index c1b69166c500..0b9979b35ca8 100644
--- a/arch/openrisc/configs/virt_defconfig
+++ b/arch/openrisc/configs/virt_defconfig
@@ -12,6 +12,7 @@ CONFIG_NR_CPUS=8
 CONFIG_SMP=y
 CONFIG_HZ_100=y
 # CONFIG_OPENRISC_NO_SPR_SR_DSX is not set
+CONFIG_JUMP_LABEL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -55,7 +56,6 @@ CONFIG_DRM=y
 # CONFIG_DRM_FBDEV_EMULATION is not set
 CONFIG_DRM_VIRTIO_GPU=y
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
@@ -94,8 +94,8 @@ CONFIG_VIRTIO_PCI=y
 CONFIG_VIRTIO_INPUT=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
 # CONFIG_DNOTIFY is not set
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index 2b1a6b00cdac..cef49d60d74c 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -9,4 +9,3 @@ generic-y += spinlock.h
 generic-y += qrwlock_types.h
 generic-y += qrwlock.h
 generic-y += user.h
-generic-y += text-patching.h
diff --git a/arch/openrisc/include/asm/bitops/__ffs.h b/arch/openrisc/include/asm/bitops/__ffs.h
index 1e224b616fdf..4827b66530b2 100644
--- a/arch/openrisc/include/asm/bitops/__ffs.h
+++ b/arch/openrisc/include/asm/bitops/__ffs.h
@@ -11,7 +11,7 @@
 
 #ifdef CONFIG_OPENRISC_HAVE_INST_FF1
 
-static inline unsigned long __ffs(unsigned long x)
+static inline __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	int ret;
 
diff --git a/arch/openrisc/include/asm/bitops/__fls.h b/arch/openrisc/include/asm/bitops/__fls.h
index 9658446ad141..637cc76fe4b7 100644
--- a/arch/openrisc/include/asm/bitops/__fls.h
+++ b/arch/openrisc/include/asm/bitops/__fls.h
@@ -11,7 +11,7 @@
 
 #ifdef CONFIG_OPENRISC_HAVE_INST_FL1
 
-static inline unsigned long __fls(unsigned long x)
+static inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	int ret;
 
diff --git a/arch/openrisc/include/asm/bitops/ffs.h b/arch/openrisc/include/asm/bitops/ffs.h
index b4c835d6bc84..536a60ab9cc3 100644
--- a/arch/openrisc/include/asm/bitops/ffs.h
+++ b/arch/openrisc/include/asm/bitops/ffs.h
@@ -10,7 +10,7 @@
 
 #ifdef CONFIG_OPENRISC_HAVE_INST_FF1
 
-static inline int ffs(int x)
+static inline __attribute_const__ int ffs(int x)
 {
 	int ret;
 
diff --git a/arch/openrisc/include/asm/bitops/fls.h b/arch/openrisc/include/asm/bitops/fls.h
index 6b77f6556fb9..77da7639bb3e 100644
--- a/arch/openrisc/include/asm/bitops/fls.h
+++ b/arch/openrisc/include/asm/bitops/fls.h
@@ -11,7 +11,7 @@
 
 #ifdef CONFIG_OPENRISC_HAVE_INST_FL1
 
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	int ret;
 
diff --git a/arch/openrisc/include/asm/cacheflush.h b/arch/openrisc/include/asm/cacheflush.h
index 984c331ff5f4..cd8f971c0fec 100644
--- a/arch/openrisc/include/asm/cacheflush.h
+++ b/arch/openrisc/include/asm/cacheflush.h
@@ -23,6 +23,9 @@
  */
 extern void local_dcache_page_flush(struct page *page);
 extern void local_icache_page_inv(struct page *page);
+extern void local_dcache_range_flush(unsigned long start, unsigned long end);
+extern void local_dcache_range_inv(unsigned long start, unsigned long end);
+extern void local_icache_range_inv(unsigned long start, unsigned long end);
 
 /*
  * Data cache flushing always happen on the local cpu. Instruction cache
@@ -39,6 +42,20 @@ extern void smp_icache_page_inv(struct page *page);
 #endif /* CONFIG_SMP */
 
 /*
+ * Even if the actual block size is larger than L1_CACHE_BYTES, paddr
+ * can be incremented by L1_CACHE_BYTES. When paddr is written to the
+ * invalidate register, the entire cache line encompassing this address
+ * is invalidated. Each subsequent reference to the same cache line will
+ * not affect the invalidation process.
+ */
+#define local_dcache_block_flush(addr) \
+	local_dcache_range_flush(addr, addr + L1_CACHE_BYTES)
+#define local_dcache_block_inv(addr) \
+	local_dcache_range_inv(addr, addr + L1_CACHE_BYTES)
+#define local_icache_block_inv(addr) \
+	local_icache_range_inv(addr, addr + L1_CACHE_BYTES)
+
+/*
  * Synchronizes caches. Whenever a cpu writes executable code to memory, this
  * should be called to make sure the processor sees the newly written code.
  */
@@ -58,7 +75,7 @@ static inline void sync_icache_dcache(struct page *page)
 
 static inline void flush_dcache_folio(struct folio *folio)
 {
-	clear_bit(PG_dc_clean, &folio->flags);
+	clear_bit(PG_dc_clean, &folio->flags.f);
 }
 #define flush_dcache_folio flush_dcache_folio
 
diff --git a/arch/openrisc/include/asm/cpuinfo.h b/arch/openrisc/include/asm/cpuinfo.h
index 5e4744153d0e..3cfc4cf0b019 100644
--- a/arch/openrisc/include/asm/cpuinfo.h
+++ b/arch/openrisc/include/asm/cpuinfo.h
@@ -15,16 +15,21 @@
 #ifndef __ASM_OPENRISC_CPUINFO_H
 #define __ASM_OPENRISC_CPUINFO_H
 
+#include <asm/spr.h>
+#include <asm/spr_defs.h>
+
+struct cache_desc {
+	u32 size;
+	u32 sets;
+	u32 block_size;
+	u32 ways;
+};
+
 struct cpuinfo_or1k {
 	u32 clock_frequency;
 
-	u32 icache_size;
-	u32 icache_block_size;
-	u32 icache_ways;
-
-	u32 dcache_size;
-	u32 dcache_block_size;
-	u32 dcache_ways;
+	struct cache_desc icache;
+	struct cache_desc dcache;
 
 	u16 coreid;
 };
@@ -32,4 +37,9 @@ struct cpuinfo_or1k {
 extern struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS];
 extern void setup_cpuinfo(void);
 
+/*
+ * Check if the cache component exists.
+ */
+extern bool cpu_cache_is_present(const unsigned int cache_type);
+
 #endif /* __ASM_OPENRISC_CPUINFO_H */
diff --git a/arch/openrisc/include/asm/fixmap.h b/arch/openrisc/include/asm/fixmap.h
index aaa6a26a3e92..74000215064d 100644
--- a/arch/openrisc/include/asm/fixmap.h
+++ b/arch/openrisc/include/asm/fixmap.h
@@ -28,6 +28,7 @@
 
 enum fixed_addresses {
 	FIX_EARLYCON_MEM_BASE,
+	FIX_TEXT_POKE0,
 	__end_of_fixed_addresses
 };
 
diff --git a/arch/openrisc/include/asm/insn-def.h b/arch/openrisc/include/asm/insn-def.h
new file mode 100644
index 000000000000..1e0c028a5b95
--- /dev/null
+++ b/arch/openrisc/include/asm/insn-def.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2025 Chen Miao
+ */
+
+#ifndef __ASM_OPENRISC_INSN_DEF_H
+#define __ASM_OPENRISC_INSN_DEF_H
+
+/* or1k instructions are always 32 bits. */
+#define	OPENRISC_INSN_SIZE		4
+
+/* or1k nop instruction code */
+#define OPENRISC_INSN_NOP     0x15000000U
+
+#endif /* __ASM_OPENRISC_INSN_DEF_H */
diff --git a/arch/openrisc/include/asm/jump_label.h b/arch/openrisc/include/asm/jump_label.h
new file mode 100644
index 000000000000..3ec0f4e19f9c
--- /dev/null
+++ b/arch/openrisc/include/asm/jump_label.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2025 Chen Miao
+ *
+ * Based on arch/arm/include/asm/jump_label.h
+ */
+#ifndef __ASM_OPENRISC_JUMP_LABEL_H
+#define __ASM_OPENRISC_JUMP_LABEL_H
+
+#ifndef __ASSEMBLER__
+
+#include <linux/types.h>
+#include <asm/insn-def.h>
+
+#define HAVE_JUMP_LABEL_BATCH
+
+#define JUMP_LABEL_NOP_SIZE OPENRISC_INSN_SIZE
+
+/**
+ * JUMP_TABLE_ENTRY - Create a jump table entry
+ * @key: Jump key identifier (typically a symbol address)
+ * @label: Target label address
+ *
+ * This macro creates a jump table entry in the dedicated kernel section (__jump_table).
+ * Each entry contains the following information:
+ * 		Offset from current instruction to jump instruction (1b - .)
+ * 		Offset from current instruction to target label (label - .)
+ * 		Offset from current instruction to key identifier (key - .)
+ */
+#define JUMP_TABLE_ENTRY(key, label)			\
+	".pushsection	__jump_table, \"aw\"	\n\t"	\
+	".align 	4 			\n\t"	\
+	".long 		1b - ., " label " - .	\n\t"	\
+	".long 		" key " - . 		\n\t"	\
+	".popsection				\n\t"
+
+#define ARCH_STATIC_BRANCH_ASM(key, label)		\
+	".align		4			\n\t"	\
+	"1: l.nop				\n\t"	\
+	"    l.nop				\n\t"	\
+	JUMP_TABLE_ENTRY(key, label)
+
+static __always_inline bool arch_static_branch(struct static_key *const key,
+					       const bool branch)
+{
+	asm goto (ARCH_STATIC_BRANCH_ASM("%0", "%l[l_yes]")
+		  ::"i"(&((char *)key)[branch])::l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
+
+#define ARCH_STATIC_BRANCH_JUMP_ASM(key, label)		\
+	".align		4			\n\t"	\
+	"1: l.j	" label "			\n\t"	\
+	"    l.nop				\n\t"	\
+	JUMP_TABLE_ENTRY(key, label)
+
+static __always_inline bool
+arch_static_branch_jump(struct static_key *const key, const bool branch)
+{
+	asm goto (ARCH_STATIC_BRANCH_JUMP_ASM("%0", "%l[l_yes]")
+		  ::"i"(&((char *)key)[branch])::l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
+
+#endif /* __ASSEMBLER__ */
+#endif /* __ASM_OPENRISC_JUMP_LABEL_H */
diff --git a/arch/openrisc/include/asm/mmu.h b/arch/openrisc/include/asm/mmu.h
index eb720110f3a2..e7826a681bc4 100644
--- a/arch/openrisc/include/asm/mmu.h
+++ b/arch/openrisc/include/asm/mmu.h
@@ -15,7 +15,7 @@
 #ifndef __ASM_OPENRISC_MMU_H
 #define __ASM_OPENRISC_MMU_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 typedef unsigned long mm_context_t;
 #endif
 
diff --git a/arch/openrisc/include/asm/page.h b/arch/openrisc/include/asm/page.h
index c589e96035e1..85797f94d1d7 100644
--- a/arch/openrisc/include/asm/page.h
+++ b/arch/openrisc/include/asm/page.h
@@ -25,7 +25,7 @@
  */
 #include <asm/setup.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define clear_page(page)	memset((page), 0, PAGE_SIZE)
 #define copy_page(to, from)	memcpy((to), (from), PAGE_SIZE)
@@ -55,10 +55,10 @@ typedef struct page *pgtable_t;
 #define __pgd(x)	((pgd_t) { (x) })
 #define __pgprot(x)	((pgprot_t) { (x) })
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
 #define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
@@ -73,7 +73,7 @@ static inline unsigned long virt_to_pfn(const void *kaddr)
 
 #define virt_addr_valid(kaddr)	(pfn_valid(virt_to_pfn(kaddr)))
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
diff --git a/arch/openrisc/include/asm/pgalloc.h b/arch/openrisc/include/asm/pgalloc.h
index c6a73772a546..3f110931d8f6 100644
--- a/arch/openrisc/include/asm/pgalloc.h
+++ b/arch/openrisc/include/asm/pgalloc.h
@@ -41,15 +41,13 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
  */
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	pgd_t *ret = (pgd_t *)__get_free_page(GFP_KERNEL);
+	pgd_t *ret = __pgd_alloc(mm, 0);
 
-	if (ret) {
-		memset(ret, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
+	if (ret)
 		memcpy(ret + USER_PTRS_PER_PGD,
 		       swapper_pg_dir + USER_PTRS_PER_PGD,
 		       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
 
-	}
 	return ret;
 }
 
@@ -66,10 +64,7 @@ extern inline pgd_t *pgd_alloc(struct mm_struct *mm)
 
 extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm);
 
-#define __pte_free_tlb(tlb, pte, addr)				\
-do {								\
-	pagetable_pte_dtor(page_ptdesc(pte));			\
-	tlb_remove_page_ptdesc((tlb), (page_ptdesc(pte)));	\
-} while (0)
+#define __pte_free_tlb(tlb, pte, addr)	\
+	tlb_remove_ptdesc((tlb), page_ptdesc(pte))
 
 #endif
diff --git a/arch/openrisc/include/asm/pgtable.h b/arch/openrisc/include/asm/pgtable.h
index 60c6ce7ff2dc..b218050e2f6d 100644
--- a/arch/openrisc/include/asm/pgtable.h
+++ b/arch/openrisc/include/asm/pgtable.h
@@ -23,7 +23,7 @@
 
 #include <asm-generic/pgtable-nopmd.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/mmu.h>
 #include <asm/fixmap.h>
 
@@ -183,23 +183,6 @@ extern void paging_init(void);
 extern unsigned long empty_zero_page[2048];
 #define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
 
-/* number of bits that fit into a memory pointer */
-#define BITS_PER_PTR			(8*sizeof(unsigned long))
-
-/* to align the pointer to a pointer address */
-#define PTR_MASK			(~(sizeof(void *)-1))
-
-/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
-/* 64-bit machines, beware!  SRB. */
-#define SIZEOF_PTR_LOG2			2
-
-/* to find an entry in a page-table */
-#define PAGE_PTR(address) \
-((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
-
-/* to set the page-dir */
-#define SET_PAGE_DIR(tsk, pgdir)
-
 #define pte_none(x)	(!pte_val(x))
 #define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
 #define pte_clear(mm, addr, xp)	do { pte_val(*(xp)) = 0; } while (0)
@@ -299,8 +282,6 @@ static inline pte_t __mk_pte(void *page, pgprot_t pgprot)
 	return pte;
 }
 
-#define mk_pte(page, pgprot) __mk_pte(page_address(page), (pgprot))
-
 #define mk_pte_phys(physpage, pgprot) \
 ({                                                                      \
 	pte_t __pte;                                                    \
@@ -413,7 +394,7 @@ static inline void update_mmu_cache_range(struct vm_fault *vmf,
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -432,5 +413,5 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 
 typedef pte_t *pte_addr_t;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ASM_OPENRISC_PGTABLE_H */
diff --git a/arch/openrisc/include/asm/processor.h b/arch/openrisc/include/asm/processor.h
index e05d1b59e24e..3ff893a67c13 100644
--- a/arch/openrisc/include/asm/processor.h
+++ b/arch/openrisc/include/asm/processor.h
@@ -39,7 +39,7 @@
  */
 #define TASK_UNMAPPED_BASE      (TASK_SIZE / 8 * 3)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct task_struct;
 
@@ -78,5 +78,5 @@ void show_registers(struct pt_regs *regs);
 
 #define cpu_relax()     barrier()
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ASM_OPENRISC_PROCESSOR_H */
diff --git a/arch/openrisc/include/asm/ptrace.h b/arch/openrisc/include/asm/ptrace.h
index 1da3e66292e2..28facf2f3e00 100644
--- a/arch/openrisc/include/asm/ptrace.h
+++ b/arch/openrisc/include/asm/ptrace.h
@@ -17,6 +17,7 @@
 
 #include <asm/spr_defs.h>
 #include <uapi/asm/ptrace.h>
+#include <linux/compiler.h>
 
 /*
  * Make kernel PTrace/register structures opaque to userspace... userspace can
@@ -26,7 +27,7 @@
  * they share a cacheline (not done yet, though... future optimization).
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * This struct describes how the registers are laid out on the kernel stack
  * during a syscall or other kernel entry.
@@ -42,6 +43,36 @@ struct pt_regs {
 			/* Named registers */
 			long  sr;	/* Stored in place of r0 */
 			long  sp;	/* r1 */
+			long  gpr2;
+			long  gpr3;
+			long  gpr4;
+			long  gpr5;
+			long  gpr6;
+			long  gpr7;
+			long  gpr8;
+			long  gpr9;
+			long  gpr10;
+			long  gpr11;
+			long  gpr12;
+			long  gpr13;
+			long  gpr14;
+			long  gpr15;
+			long  gpr16;
+			long  gpr17;
+			long  gpr18;
+			long  gpr19;
+			long  gpr20;
+			long  gpr21;
+			long  gpr22;
+			long  gpr23;
+			long  gpr24;
+			long  gpr25;
+			long  gpr26;
+			long  gpr27;
+			long  gpr28;
+			long  gpr29;
+			long  gpr30;
+			long  gpr31;
 		};
 		struct {
 			/* Old style */
@@ -66,17 +97,57 @@ struct pt_regs {
 /* TODO: Rename this to REDZONE because that's what it is */
 #define STACK_FRAME_OVERHEAD  128  /* size of minimum stack frame */
 
-#define instruction_pointer(regs)	((regs)->pc)
+#define MAX_REG_OFFSET offsetof(struct pt_regs, orig_gpr11)
+
+/* Helpers for working with the instruction pointer */
+static inline unsigned long instruction_pointer(struct pt_regs *regs)
+{
+	return (unsigned long)regs->pc;
+}
+static inline void instruction_pointer_set(struct pt_regs *regs,
+					   unsigned long val)
+{
+	regs->pc = val;
+}
+
 #define user_mode(regs)			(((regs)->sr & SPR_SR_SM) == 0)
 #define user_stack_pointer(regs)	((unsigned long)(regs)->sp)
 #define profile_pc(regs)		instruction_pointer(regs)
 
+/* Valid only for Kernel mode traps. */
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return (unsigned long)regs->sp;
+}
+
 static inline long regs_return_value(struct pt_regs *regs)
 {
 	return regs->gpr[11];
 }
 
-#endif /* __ASSEMBLY__ */
+extern int regs_query_register_offset(const char *name);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	pt_regs from which register value is gotten
+ * @offset:	offset of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+#endif /* __ASSEMBLER__ */
 
 /*
  * Offsets used by 'ptrace' system call interface.
diff --git a/arch/openrisc/include/asm/setup.h b/arch/openrisc/include/asm/setup.h
index 9acbc5deda69..dce9f4d3b378 100644
--- a/arch/openrisc/include/asm/setup.h
+++ b/arch/openrisc/include/asm/setup.h
@@ -8,7 +8,7 @@
 #include <linux/init.h>
 #include <asm-generic/setup.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 void __init or1k_early_setup(void *fdt);
 #endif
 
diff --git a/arch/openrisc/include/asm/syscall.h b/arch/openrisc/include/asm/syscall.h
index 903ed882bdec..5e037d9659c5 100644
--- a/arch/openrisc/include/asm/syscall.h
+++ b/arch/openrisc/include/asm/syscall.h
@@ -26,6 +26,12 @@ syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 }
 
 static inline void
+syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr)
+{
+	regs->orig_gpr11 = nr;
+}
+
+static inline void
 syscall_rollback(struct task_struct *task, struct pt_regs *regs)
 {
 	regs->gpr[11] = regs->orig_gpr11;
@@ -57,6 +63,13 @@ syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
 	memcpy(args, &regs->gpr[3], 6 * sizeof(args[0]));
 }
 
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+		      const unsigned long *args)
+{
+	memcpy(&regs->gpr[3], args, 6 * sizeof(args[0]));
+}
+
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	return AUDIT_ARCH_OPENRISC;
diff --git a/arch/openrisc/include/asm/text-patching.h b/arch/openrisc/include/asm/text-patching.h
new file mode 100644
index 000000000000..d19098dac0cc
--- /dev/null
+++ b/arch/openrisc/include/asm/text-patching.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2025 Chen Miao
+ */
+
+#ifndef _ASM_OPENRISC_PATCHING_H
+#define _ASM_OPENRISC_PATCHING_H
+
+#include <linux/types.h>
+
+int patch_insn_write(void *addr, u32 insn);
+
+#endif /* _ASM_OPENRISC_PATCHING_H */
diff --git a/arch/openrisc/include/asm/thread_info.h b/arch/openrisc/include/asm/thread_info.h
index 4af3049c34c2..e338fff7efb0 100644
--- a/arch/openrisc/include/asm/thread_info.h
+++ b/arch/openrisc/include/asm/thread_info.h
@@ -17,7 +17,7 @@
 
 #ifdef __KERNEL__
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/types.h>
 #include <asm/processor.h>
 #endif
@@ -38,7 +38,7 @@
  * - if the contents of this structure are changed, the assembly constants
  *   must also be changed
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct thread_info {
 	struct task_struct	*task;		/* main task structure */
@@ -58,7 +58,7 @@ struct thread_info {
  *
  * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define INIT_THREAD_INFO(tsk)				\
 {							\
 	.task		= &tsk,				\
@@ -75,7 +75,7 @@ register struct thread_info *current_thread_info_reg asm("r10");
 #define get_thread_info(ti) get_task_struct((ti)->task)
 #define put_thread_info(ti) put_task_struct((ti)->task)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * thread information flags
diff --git a/arch/openrisc/include/uapi/asm/ptrace.h b/arch/openrisc/include/uapi/asm/ptrace.h
index a77cc9915ca8..1f12a60d5a06 100644
--- a/arch/openrisc/include/uapi/asm/ptrace.h
+++ b/arch/openrisc/include/uapi/asm/ptrace.h
@@ -20,7 +20,7 @@
 #ifndef _UAPI__ASM_OPENRISC_PTRACE_H
 #define _UAPI__ASM_OPENRISC_PTRACE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * This is the layout of the regset returned by the GETREGSET ptrace call
  */
diff --git a/arch/openrisc/kernel/Makefile b/arch/openrisc/kernel/Makefile
index 79129161f3e0..19e0eb94f2eb 100644
--- a/arch/openrisc/kernel/Makefile
+++ b/arch/openrisc/kernel/Makefile
@@ -3,15 +3,17 @@
 # Makefile for the linux kernel.
 #
 
-extra-y	:= vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 
 obj-y	:= head.o setup.o or32_ksyms.o process.o dma.o \
 	   traps.o time.o irq.o entry.o ptrace.o signal.o \
-	   sys_call_table.o unwinder.o
+	   sys_call_table.o unwinder.o cacheinfo.o
 
+obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 obj-$(CONFIG_SMP)		+= smp.o sync-timer.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_OF)		+= prom.o
+obj-y	+= patching.o
 
 clean:
diff --git a/arch/openrisc/kernel/asm-offsets.c b/arch/openrisc/kernel/asm-offsets.c
index 710651d5aaae..3cc826f2216b 100644
--- a/arch/openrisc/kernel/asm-offsets.c
+++ b/arch/openrisc/kernel/asm-offsets.c
@@ -18,6 +18,7 @@
  * compile this file to assembler, and then extract the
  * #defines from the assembly-language output.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/signal.h>
 #include <linux/sched.h>
diff --git a/arch/openrisc/kernel/cacheinfo.c b/arch/openrisc/kernel/cacheinfo.c
new file mode 100644
index 000000000000..61230545e4ff
--- /dev/null
+++ b/arch/openrisc/kernel/cacheinfo.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC cacheinfo support
+ *
+ * Based on work done for MIPS and LoongArch. All original copyrights
+ * apply as per the original source declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2025 Sahil Siddiq <sahilcdq@proton.me>
+ */
+
+#include <linux/cacheinfo.h>
+#include <asm/cpuinfo.h>
+#include <asm/spr.h>
+#include <asm/spr_defs.h>
+
+static inline void ci_leaf_init(struct cacheinfo *this_leaf, enum cache_type type,
+				unsigned int level, struct cache_desc *cache, int cpu)
+{
+	this_leaf->type = type;
+	this_leaf->level = level;
+	this_leaf->coherency_line_size = cache->block_size;
+	this_leaf->number_of_sets = cache->sets;
+	this_leaf->ways_of_associativity = cache->ways;
+	this_leaf->size = cache->size;
+	cpumask_set_cpu(cpu, &this_leaf->shared_cpu_map);
+}
+
+int init_cache_level(unsigned int cpu)
+{
+	struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+	int leaves = 0, levels = 0;
+	unsigned long upr = mfspr(SPR_UPR);
+	unsigned long iccfgr, dccfgr;
+
+	if (!(upr & SPR_UPR_UP)) {
+		printk(KERN_INFO
+		       "-- no UPR register... unable to detect configuration\n");
+		return -ENOENT;
+	}
+
+	if (cpu_cache_is_present(SPR_UPR_DCP)) {
+		dccfgr = mfspr(SPR_DCCFGR);
+		cpuinfo->dcache.ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
+		cpuinfo->dcache.sets = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
+		cpuinfo->dcache.block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
+		cpuinfo->dcache.size =
+		    cpuinfo->dcache.sets * cpuinfo->dcache.ways * cpuinfo->dcache.block_size;
+		leaves += 1;
+		printk(KERN_INFO
+		       "-- dcache: %d bytes total, %d bytes/line, %d set(s), %d way(s)\n",
+		       cpuinfo->dcache.size, cpuinfo->dcache.block_size,
+		       cpuinfo->dcache.sets, cpuinfo->dcache.ways);
+	} else
+		printk(KERN_INFO "-- dcache disabled\n");
+
+	if (cpu_cache_is_present(SPR_UPR_ICP)) {
+		iccfgr = mfspr(SPR_ICCFGR);
+		cpuinfo->icache.ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
+		cpuinfo->icache.sets = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
+		cpuinfo->icache.block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
+		cpuinfo->icache.size =
+		    cpuinfo->icache.sets * cpuinfo->icache.ways * cpuinfo->icache.block_size;
+		leaves += 1;
+		printk(KERN_INFO
+		       "-- icache: %d bytes total, %d bytes/line, %d set(s), %d way(s)\n",
+		       cpuinfo->icache.size, cpuinfo->icache.block_size,
+		       cpuinfo->icache.sets, cpuinfo->icache.ways);
+	} else
+		printk(KERN_INFO "-- icache disabled\n");
+
+	if (!leaves)
+		return -ENOENT;
+
+	levels = 1;
+
+	this_cpu_ci->num_leaves = leaves;
+	this_cpu_ci->num_levels = levels;
+
+	return 0;
+}
+
+int populate_cache_leaves(unsigned int cpu)
+{
+	struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
+	int level = 1;
+
+	if (cpu_cache_is_present(SPR_UPR_DCP)) {
+		ci_leaf_init(this_leaf, CACHE_TYPE_DATA, level, &cpuinfo->dcache, cpu);
+		this_leaf->attributes = ((mfspr(SPR_DCCFGR) & SPR_DCCFGR_CWS) >> 8) ?
+					CACHE_WRITE_BACK : CACHE_WRITE_THROUGH;
+		this_leaf++;
+	}
+
+	if (cpu_cache_is_present(SPR_UPR_ICP))
+		ci_leaf_init(this_leaf, CACHE_TYPE_INST, level, &cpuinfo->icache, cpu);
+
+	this_cpu_ci->cpu_map_populated = true;
+
+	return 0;
+}
diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c
index b3edbb33b621..af932a4ad306 100644
--- a/arch/openrisc/kernel/dma.c
+++ b/arch/openrisc/kernel/dma.c
@@ -17,6 +17,7 @@
 #include <linux/pagewalk.h>
 
 #include <asm/cpuinfo.h>
+#include <asm/cacheflush.h>
 #include <asm/spr_defs.h>
 #include <asm/tlbflush.h>
 
@@ -24,9 +25,6 @@ static int
 page_set_nocache(pte_t *pte, unsigned long addr,
 		 unsigned long next, struct mm_walk *walk)
 {
-	unsigned long cl;
-	struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
-
 	pte_val(*pte) |= _PAGE_CI;
 
 	/*
@@ -36,8 +34,7 @@ page_set_nocache(pte_t *pte, unsigned long addr,
 	flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
 
 	/* Flush page out of dcache */
-	for (cl = __pa(addr); cl < __pa(next); cl += cpuinfo->dcache_block_size)
-		mtspr(SPR_DCBFR, cl);
+	local_dcache_range_flush(__pa(addr), __pa(next));
 
 	return 0;
 }
@@ -75,7 +72,7 @@ void *arch_dma_set_uncached(void *cpu_addr, size_t size)
 	 * them and setting the cache-inhibit bit.
 	 */
 	mmap_write_lock(&init_mm);
-	error = walk_page_range_novma(&init_mm, va, va + size,
+	error = walk_kernel_page_table_range(va, va + size,
 			&set_nocache_walk_ops, NULL, NULL);
 	mmap_write_unlock(&init_mm);
 
@@ -90,7 +87,7 @@ void arch_dma_clear_uncached(void *cpu_addr, size_t size)
 
 	mmap_write_lock(&init_mm);
 	/* walk_page_range shouldn't be able to fail here */
-	WARN_ON(walk_page_range_novma(&init_mm, va, va + size,
+	WARN_ON(walk_kernel_page_table_range(va, va + size,
 			&clear_nocache_walk_ops, NULL, NULL));
 	mmap_write_unlock(&init_mm);
 }
@@ -98,21 +95,14 @@ void arch_dma_clear_uncached(void *cpu_addr, size_t size)
 void arch_sync_dma_for_device(phys_addr_t addr, size_t size,
 		enum dma_data_direction dir)
 {
-	unsigned long cl;
-	struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
-
 	switch (dir) {
 	case DMA_TO_DEVICE:
 		/* Flush the dcache for the requested range */
-		for (cl = addr; cl < addr + size;
-		     cl += cpuinfo->dcache_block_size)
-			mtspr(SPR_DCBFR, cl);
+		local_dcache_range_flush(addr, addr + size);
 		break;
 	case DMA_FROM_DEVICE:
 		/* Invalidate the dcache for the requested range */
-		for (cl = addr; cl < addr + size;
-		     cl += cpuinfo->dcache_block_size)
-			mtspr(SPR_DCBIR, cl);
+		local_dcache_range_inv(addr, addr + size);
 		break;
 	default:
 		/*
diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S
index 440711d7bf40..c7e90b09645e 100644
--- a/arch/openrisc/kernel/entry.S
+++ b/arch/openrisc/kernel/entry.S
@@ -239,6 +239,8 @@ handler:							;\
 
 /* =====================================================[ exceptions] === */
 
+	__REF
+
 /* ---[ 0x100: RESET exception ]----------------------------------------- */
 
 EXCEPTION_ENTRY(_tng_kernel_start)
@@ -712,6 +714,10 @@ _syscall_check_trace_leave:
  * interrupts that set NEED_RESCHED or SIGNALPENDING... really true? */
 
 _syscall_check_work:
+#ifdef CONFIG_DEBUG_RSEQ
+	l.jal	rseq_syscall
+	 l.ori	r3,r1,0
+#endif
 	/* Here we need to disable interrupts */
 	DISABLE_INTERRUPTS(r27,r29)
 	TRACE_IRQS_OFF
diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
index 439e00f81e5d..bd760066f1cd 100644
--- a/arch/openrisc/kernel/head.S
+++ b/arch/openrisc/kernel/head.S
@@ -26,15 +26,15 @@
 #include <asm/asm-offsets.h>
 #include <linux/of_fdt.h>
 
-#define tophys(rd,rs)				\
-	l.movhi	rd,hi(-KERNELBASE)		;\
+#define tophys(rd,rs)						\
+	l.movhi	rd,hi(-KERNELBASE)				;\
 	l.add	rd,rd,rs
 
-#define CLEAR_GPR(gpr)				\
+#define CLEAR_GPR(gpr)						\
 	l.movhi	gpr,0x0
 
-#define LOAD_SYMBOL_2_GPR(gpr,symbol)		\
-	l.movhi gpr,hi(symbol)			;\
+#define LOAD_SYMBOL_2_GPR(gpr,symbol)				\
+	l.movhi gpr,hi(symbol)					;\
 	l.ori   gpr,gpr,lo(symbol)
 
 
@@ -326,21 +326,21 @@
 	l.addi  r1,r1,-(INT_FRAME_SIZE)				;\
 	/* r1 is KSP, r30 is __pa(KSP) */			;\
 	tophys  (r30,r1)					;\
-	l.sw    PT_GPR12(r30),r12					;\
+	l.sw    PT_GPR12(r30),r12				;\
 	l.mfspr r12,r0,SPR_EPCR_BASE				;\
 	l.sw    PT_PC(r30),r12					;\
 	l.mfspr r12,r0,SPR_ESR_BASE				;\
 	l.sw    PT_SR(r30),r12					;\
 	/* save r31 */						;\
 	EXCEPTION_T_LOAD_GPR30(r12)				;\
-	l.sw	PT_GPR30(r30),r12					;\
+	l.sw	PT_GPR30(r30),r12				;\
 	/* save r10 as was prior to exception */		;\
 	EXCEPTION_T_LOAD_GPR10(r12)				;\
-	l.sw	PT_GPR10(r30),r12					;\
-	/* save PT_SP as was prior to exception */			;\
+	l.sw	PT_GPR10(r30),r12				;\
+	/* save PT_SP as was prior to exception */		;\
 	EXCEPTION_T_LOAD_SP(r12)				;\
 	l.sw	PT_SP(r30),r12					;\
-	l.sw    PT_GPR13(r30),r13					;\
+	l.sw    PT_GPR13(r30),r13				;\
 	/* --> */						;\
 	/* save exception r4, set r4 = EA */			;\
 	l.sw	PT_GPR4(r30),r4					;\
@@ -357,6 +357,8 @@
 
 /* =====================================================[ exceptions] === */
 
+	__HEAD
+
 /* ---[ 0x100: RESET exception ]----------------------------------------- */
     .org 0x100
 	/* Jump to .init code at _start which lives in the .head section
@@ -394,7 +396,7 @@ _dispatch_do_ipage_fault:
     .org 0x500
 	EXCEPTION_HANDLE(_timer_handler)
 
-/* ---[ 0x600: Alignment exception ]-------------------------------------- */
+/* ---[ 0x600: Alignment exception ]------------------------------------- */
     .org 0x600
 	EXCEPTION_HANDLE(_alignment_handler)
 
@@ -424,7 +426,7 @@ _dispatch_do_ipage_fault:
     .org 0xc00
 	EXCEPTION_HANDLE(_sys_call_handler)
 
-/* ---[ 0xd00: Floating point exception ]--------------------------------- */
+/* ---[ 0xd00: Floating point exception ]-------------------------------- */
     .org 0xd00
 	EXCEPTION_HANDLE(_fpe_trap_handler)
 
@@ -506,10 +508,10 @@ _dispatch_do_ipage_fault:
 
 /*    .text*/
 
-/* This early stuff belongs in HEAD, but some of the functions below definitely
+/* This early stuff belongs in the .init.text section, but some of the functions below definitely
  * don't... */
 
-	__HEAD
+	__INIT
 	.global _start
 _start:
 	/* Init r0 to zero as per spec */
@@ -816,7 +818,7 @@ secondary_start:
 
 #endif
 
-/* ========================================[ cache ]=== */
+/* ==========================================================[ cache ]=== */
 
 	/* alignment here so we don't change memory offsets with
 	 * memory controller defined
diff --git a/arch/openrisc/kernel/jump_label.c b/arch/openrisc/kernel/jump_label.c
new file mode 100644
index 000000000000..ab7137c23b46
--- /dev/null
+++ b/arch/openrisc/kernel/jump_label.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 Chen Miao
+ *
+ * Based on arch/arm/kernel/jump_label.c
+ */
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <asm/bug.h>
+#include <asm/cacheflush.h>
+#include <asm/text-patching.h>
+
+bool arch_jump_label_transform_queue(struct jump_entry *entry,
+				     enum jump_label_type type)
+{
+	void *addr = (void *)jump_entry_code(entry);
+	u32 insn;
+
+	if (type == JUMP_LABEL_JMP) {
+		long offset;
+
+		offset = jump_entry_target(entry) - jump_entry_code(entry);
+		/*
+		 * The actual maximum range of the l.j instruction's offset is -134,217,728
+		 * ~ 134,217,724 (sign 26-bit imm).
+		 * For the original jump range, we need to right-shift N by 2 to obtain the
+		 * instruction's offset.
+		 */
+		WARN_ON_ONCE(offset < -134217728 || offset > 134217724);
+
+		/* 26bit imm mask */
+		offset = (offset >> 2) & 0x03ffffff;
+
+		insn = offset;
+	} else {
+		insn = OPENRISC_INSN_NOP;
+	}
+
+	if (early_boot_irqs_disabled)
+		copy_to_kernel_nofault(addr, &insn, sizeof(insn));
+	else
+		patch_insn_write(addr, insn);
+
+	return true;
+}
+
+void arch_jump_label_transform_apply(void)
+{
+	kick_all_cpus_sync();
+}
diff --git a/arch/openrisc/kernel/module.c b/arch/openrisc/kernel/module.c
index c9ff4c4a0b29..4ac4fbaa827c 100644
--- a/arch/openrisc/kernel/module.c
+++ b/arch/openrisc/kernel/module.c
@@ -55,6 +55,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 			value |= *location & 0xfc000000;
 			*location = value;
 			break;
+		case R_OR1K_32_PCREL:
+			value -= (uint32_t)location;
+			*location = value;
+			break;
 		case R_OR1K_AHI16:
 			/* Adjust the operand to match with a signed LO16.  */
 			value += 0x8000;
diff --git a/arch/openrisc/kernel/patching.c b/arch/openrisc/kernel/patching.c
new file mode 100644
index 000000000000..d186172beb33
--- /dev/null
+++ b/arch/openrisc/kernel/patching.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2020 SiFive
+ * Copyright (C) 2025 Chen Miao
+ */
+
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <asm/insn-def.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+#include <asm/fixmap.h>
+#include <asm/text-patching.h>
+#include <asm/sections.h>
+
+static DEFINE_RAW_SPINLOCK(patch_lock);
+
+static __always_inline void *patch_map(void *addr, int fixmap)
+{
+	uintptr_t uaddr = (uintptr_t) addr;
+	phys_addr_t phys;
+
+	if (core_kernel_text(uaddr)) {
+		phys = __pa_symbol(addr);
+	} else {
+		struct page *page = vmalloc_to_page(addr);
+		BUG_ON(!page);
+		phys = page_to_phys(page) + offset_in_page(addr);
+	}
+
+	return (void *)set_fixmap_offset(fixmap, phys);
+}
+
+static void patch_unmap(int fixmap)
+{
+	clear_fixmap(fixmap);
+}
+
+static int __patch_insn_write(void *addr, u32 insn)
+{
+	void *waddr = addr;
+	unsigned long flags = 0;
+	int ret;
+
+	raw_spin_lock_irqsave(&patch_lock, flags);
+
+	waddr = patch_map(addr, FIX_TEXT_POKE0);
+
+	ret = copy_to_kernel_nofault(waddr, &insn, OPENRISC_INSN_SIZE);
+	local_icache_range_inv((unsigned long)waddr,
+			       (unsigned long)waddr + OPENRISC_INSN_SIZE);
+
+	patch_unmap(FIX_TEXT_POKE0);
+
+	raw_spin_unlock_irqrestore(&patch_lock, flags);
+
+	return ret;
+}
+
+/*
+ * patch_insn_write - Write a single instruction to a specified memory location
+ * This API provides a single-instruction patching, primarily used for runtime
+ * code modification.
+ * By the way, the insn size must be 4 bytes.
+ */
+int patch_insn_write(void *addr, u32 insn)
+{
+	u32 *tp = addr;
+	int ret;
+
+	if ((uintptr_t) tp & 0x3)
+		return -EINVAL;
+
+	ret = __patch_insn_write(tp, insn);
+
+	return ret;
+}
diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c
index eef99fee2110..73ffb9fa3118 100644
--- a/arch/openrisc/kernel/process.c
+++ b/arch/openrisc/kernel/process.c
@@ -165,7 +165,7 @@ extern asmlinkage void ret_from_fork(void);
 int
 copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *userregs;
diff --git a/arch/openrisc/kernel/ptrace.c b/arch/openrisc/kernel/ptrace.c
index 5091b18eab4c..552489b24855 100644
--- a/arch/openrisc/kernel/ptrace.c
+++ b/arch/openrisc/kernel/ptrace.c
@@ -124,7 +124,7 @@ enum or1k_regset {
 
 static const struct user_regset or1k_regsets[] = {
 	[REGSET_GENERAL] = {
-			    .core_note_type = NT_PRSTATUS,
+			    USER_REGSET_NOTE_TYPE(PRSTATUS),
 			    .n = ELF_NGREG,
 			    .size = sizeof(long),
 			    .align = sizeof(long),
@@ -133,7 +133,7 @@ static const struct user_regset or1k_regsets[] = {
 			    },
 #ifdef CONFIG_FPU
 	[REGSET_FPU] = {
-			    .core_note_type = NT_PRFPREG,
+			    USER_REGSET_NOTE_TYPE(PRFPREG),
 			    .n = sizeof(struct __or1k_fpu_state) / sizeof(long),
 			    .size = sizeof(long),
 			    .align = sizeof(long),
@@ -160,6 +160,102 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
  * in exit.c or in signal.c.
  */
 
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(sr),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(gpr2),
+	REG_OFFSET_NAME(gpr3),
+	REG_OFFSET_NAME(gpr4),
+	REG_OFFSET_NAME(gpr5),
+	REG_OFFSET_NAME(gpr6),
+	REG_OFFSET_NAME(gpr7),
+	REG_OFFSET_NAME(gpr8),
+	REG_OFFSET_NAME(gpr9),
+	REG_OFFSET_NAME(gpr10),
+	REG_OFFSET_NAME(gpr11),
+	REG_OFFSET_NAME(gpr12),
+	REG_OFFSET_NAME(gpr13),
+	REG_OFFSET_NAME(gpr14),
+	REG_OFFSET_NAME(gpr15),
+	REG_OFFSET_NAME(gpr16),
+	REG_OFFSET_NAME(gpr17),
+	REG_OFFSET_NAME(gpr18),
+	REG_OFFSET_NAME(gpr19),
+	REG_OFFSET_NAME(gpr20),
+	REG_OFFSET_NAME(gpr21),
+	REG_OFFSET_NAME(gpr22),
+	REG_OFFSET_NAME(gpr23),
+	REG_OFFSET_NAME(gpr24),
+	REG_OFFSET_NAME(gpr25),
+	REG_OFFSET_NAME(gpr26),
+	REG_OFFSET_NAME(gpr27),
+	REG_OFFSET_NAME(gpr28),
+	REG_OFFSET_NAME(gpr29),
+	REG_OFFSET_NAME(gpr30),
+	REG_OFFSET_NAME(gpr31),
+	REG_OFFSET_NAME(pc),
+	REG_OFFSET_NAME(orig_gpr11),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:      pt_regs which contains kernel stack pointer.
+ * @addr:      address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+static bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return (addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
 
 /*
  * Called by kernel/ptrace.c when detaching..
diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
index be56eaafc8b9..000a9cc10e6f 100644
--- a/arch/openrisc/kernel/setup.c
+++ b/arch/openrisc/kernel/setup.c
@@ -113,21 +113,6 @@ static void print_cpuinfo(void)
 		return;
 	}
 
-	if (upr & SPR_UPR_DCP)
-		printk(KERN_INFO
-		       "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
-		       cpuinfo->dcache_size, cpuinfo->dcache_block_size,
-		       cpuinfo->dcache_ways);
-	else
-		printk(KERN_INFO "-- dcache disabled\n");
-	if (upr & SPR_UPR_ICP)
-		printk(KERN_INFO
-		       "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
-		       cpuinfo->icache_size, cpuinfo->icache_block_size,
-		       cpuinfo->icache_ways);
-	else
-		printk(KERN_INFO "-- icache disabled\n");
-
 	if (upr & SPR_UPR_DMP)
 		printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
 		       1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
@@ -155,8 +140,6 @@ static void print_cpuinfo(void)
 void __init setup_cpuinfo(void)
 {
 	struct device_node *cpu;
-	unsigned long iccfgr, dccfgr;
-	unsigned long cache_set_size;
 	int cpu_id = smp_processor_id();
 	struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu_id];
 
@@ -164,20 +147,6 @@ void __init setup_cpuinfo(void)
 	if (!cpu)
 		panic("Couldn't find CPU%d in device tree...\n", cpu_id);
 
-	iccfgr = mfspr(SPR_ICCFGR);
-	cpuinfo->icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
-	cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
-	cpuinfo->icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
-	cpuinfo->icache_size =
-	    cache_set_size * cpuinfo->icache_ways * cpuinfo->icache_block_size;
-
-	dccfgr = mfspr(SPR_DCCFGR);
-	cpuinfo->dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
-	cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
-	cpuinfo->dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
-	cpuinfo->dcache_size =
-	    cache_set_size * cpuinfo->dcache_ways * cpuinfo->dcache_block_size;
-
 	if (of_property_read_u32(cpu, "clock-frequency",
 				 &cpuinfo->clock_frequency)) {
 		printk(KERN_WARNING
@@ -280,6 +249,8 @@ void __init setup_arch(char **cmdline_p)
 		initrd_below_start_ok = 1;
 	}
 #endif
+	/* perform jump_table sorting before paging_init locks down read only memory */
+	jump_label_init();
 
 	/* paging_init() sets up the MMU and marks all pages as reserved */
 	paging_init();
@@ -294,14 +265,14 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	unsigned int vr, cpucfgr;
 	unsigned int avr;
 	unsigned int version;
+#ifdef CONFIG_SMP
 	struct cpuinfo_or1k *cpuinfo = v;
+	seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid);
+#endif
 
 	vr = mfspr(SPR_VR);
 	cpucfgr = mfspr(SPR_CPUCFGR);
 
-#ifdef CONFIG_SMP
-	seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid);
-#endif
 	if (vr & SPR_VR_UVRP) {
 		vr = mfspr(SPR_VR2);
 		version = vr & SPR_VR2_VER;
@@ -320,14 +291,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		seq_printf(m, "revision\t\t: %d\n", vr & SPR_VR_REV);
 	}
 	seq_printf(m, "frequency\t\t: %ld\n", loops_per_jiffy * HZ);
-	seq_printf(m, "dcache size\t\t: %d bytes\n", cpuinfo->dcache_size);
-	seq_printf(m, "dcache block size\t: %d bytes\n",
-		   cpuinfo->dcache_block_size);
-	seq_printf(m, "dcache ways\t\t: %d\n", cpuinfo->dcache_ways);
-	seq_printf(m, "icache size\t\t: %d bytes\n", cpuinfo->icache_size);
-	seq_printf(m, "icache block size\t: %d bytes\n",
-		   cpuinfo->icache_block_size);
-	seq_printf(m, "icache ways\t\t: %d\n", cpuinfo->icache_ways);
 	seq_printf(m, "immu\t\t\t: %d entries, %lu ways\n",
 		   1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
 		   1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c
index c7ab42e2cb7a..f70a13ee0593 100644
--- a/arch/openrisc/kernel/signal.c
+++ b/arch/openrisc/kernel/signal.c
@@ -244,6 +244,8 @@ handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 {
 	int ret;
 
+	rseq_signal_deliver(ksig, regs);
+
 	ret = setup_rt_frame(ksig, sigmask_to_save(), regs);
 
 	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
diff --git a/arch/openrisc/kernel/vmlinux.lds.S b/arch/openrisc/kernel/vmlinux.lds.S
index bc1306047837..049bff45f612 100644
--- a/arch/openrisc/kernel/vmlinux.lds.S
+++ b/arch/openrisc/kernel/vmlinux.lds.S
@@ -50,6 +50,7 @@ SECTIONS
         .text                   : AT(ADDR(.text) - LOAD_OFFSET)
 	{
           _stext = .;
+	  HEAD_TEXT
 	  TEXT_TEXT
 	  SCHED_TEXT
 	  LOCK_TEXT
@@ -83,8 +84,6 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	__init_begin = .;
 
-	HEAD_TEXT_SECTION
-
 	/* Page aligned */
 	INIT_TEXT_SECTION(PAGE_SIZE)
 
diff --git a/arch/openrisc/mm/cache.c b/arch/openrisc/mm/cache.c
index eb43b73f3855..f33df46dae4e 100644
--- a/arch/openrisc/mm/cache.c
+++ b/arch/openrisc/mm/cache.c
@@ -14,37 +14,76 @@
 #include <asm/spr_defs.h>
 #include <asm/cache.h>
 #include <asm/cacheflush.h>
+#include <asm/cpuinfo.h>
 #include <asm/tlbflush.h>
 
-static __always_inline void cache_loop(struct page *page, const unsigned int reg)
+/*
+ * Check if the cache component exists.
+ */
+bool cpu_cache_is_present(const unsigned int cache_type)
 {
-	unsigned long paddr = page_to_pfn(page) << PAGE_SHIFT;
-	unsigned long line = paddr & ~(L1_CACHE_BYTES - 1);
+	unsigned long upr = mfspr(SPR_UPR);
+	unsigned long mask = SPR_UPR_UP | cache_type;
+
+	return !((upr & mask) ^ mask);
+}
+
+static __always_inline void cache_loop(unsigned long paddr, unsigned long end,
+				       const unsigned short reg, const unsigned int cache_type)
+{
+	if (!cpu_cache_is_present(cache_type))
+		return;
 
-	while (line < paddr + PAGE_SIZE) {
-		mtspr(reg, line);
-		line += L1_CACHE_BYTES;
+	while (paddr < end) {
+		mtspr(reg, paddr);
+		paddr += L1_CACHE_BYTES;
 	}
 }
 
+static __always_inline void cache_loop_page(struct page *page, const unsigned short reg,
+					    const unsigned int cache_type)
+{
+	unsigned long paddr = page_to_pfn(page) << PAGE_SHIFT;
+	unsigned long end = paddr + PAGE_SIZE;
+
+	paddr &= ~(L1_CACHE_BYTES - 1);
+
+	cache_loop(paddr, end, reg, cache_type);
+}
+
 void local_dcache_page_flush(struct page *page)
 {
-	cache_loop(page, SPR_DCBFR);
+	cache_loop_page(page, SPR_DCBFR, SPR_UPR_DCP);
 }
 EXPORT_SYMBOL(local_dcache_page_flush);
 
 void local_icache_page_inv(struct page *page)
 {
-	cache_loop(page, SPR_ICBIR);
+	cache_loop_page(page, SPR_ICBIR, SPR_UPR_ICP);
 }
 EXPORT_SYMBOL(local_icache_page_inv);
 
+void local_dcache_range_flush(unsigned long start, unsigned long end)
+{
+	cache_loop(start, end, SPR_DCBFR, SPR_UPR_DCP);
+}
+
+void local_dcache_range_inv(unsigned long start, unsigned long end)
+{
+	cache_loop(start, end, SPR_DCBIR, SPR_UPR_DCP);
+}
+
+void local_icache_range_inv(unsigned long start, unsigned long end)
+{
+	cache_loop(start, end, SPR_ICBIR, SPR_UPR_ICP);
+}
+
 void update_cache(struct vm_area_struct *vma, unsigned long address,
 	pte_t *pte)
 {
 	unsigned long pfn = pte_val(*pte) >> PAGE_SHIFT;
 	struct folio *folio = page_folio(pfn_to_page(pfn));
-	int dirty = !test_and_set_bit(PG_dc_clean, &folio->flags);
+	int dirty = !test_and_set_bit(PG_dc_clean, &folio->flags.f);
 
 	/*
 	 * Since icaches do not snoop for updated data on OpenRISC, we
@@ -58,4 +97,3 @@ void update_cache(struct vm_area_struct *vma, unsigned long address,
 			sync_icache_dcache(folio_page(folio, nr));
 	}
 }
-
diff --git a/arch/openrisc/mm/init.c b/arch/openrisc/mm/init.c
index d0cb1a0126f9..9382d9a0ec78 100644
--- a/arch/openrisc/mm/init.c
+++ b/arch/openrisc/mm/init.c
@@ -35,6 +35,7 @@
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 #include <asm/sections.h>
+#include <asm/cacheflush.h>
 
 int mem_init_done;
 
@@ -176,8 +177,8 @@ void __init paging_init(void)
 	barrier();
 
 	/* Invalidate instruction caches after code modification */
-	mtspr(SPR_ICBIR, 0x900);
-	mtspr(SPR_ICBIR, 0xa00);
+	local_icache_block_inv(0x900);
+	local_icache_block_inv(0xa00);
 
 	/* New TLB miss handlers and kernel page tables are in now place.
 	 * Make sure that page flags get updated for all pages in TLB by
@@ -193,15 +194,9 @@ void __init mem_init(void)
 {
 	BUG_ON(!mem_map);
 
-	max_mapnr = max_low_pfn;
-	high_memory = (void *)__va(max_low_pfn * PAGE_SIZE);
-
 	/* clear the zero-page */
 	memset((void *)empty_zero_page, 0, PAGE_SIZE);
 
-	/* this will put all low memory onto the freelists */
-	memblock_free_all();
-
 	printk("mem_init_done ...........................................\n");
 	mem_init_done = 1;
 	return;
@@ -231,7 +226,11 @@ static int __init map_page(unsigned long va, phys_addr_t pa, pgprot_t prot)
 	return 0;
 }
 
-void __init __set_fixmap(enum fixed_addresses idx,
+/*
+ * __set_fix must now support both EARLYCON and TEXT_POKE mappings,
+ * which are used at different stages of kernel execution.
+ */
+void __set_fixmap(enum fixed_addresses idx,
 			 phys_addr_t phys, pgprot_t prot)
 {
 	unsigned long address = __fix_to_virt(idx);
diff --git a/arch/openrisc/mm/ioremap.c b/arch/openrisc/mm/ioremap.c
index f59ea4c10b0f..3b352f97fecb 100644
--- a/arch/openrisc/mm/ioremap.c
+++ b/arch/openrisc/mm/ioremap.c
@@ -36,12 +36,9 @@ pte_t __ref *pte_alloc_one_kernel(struct mm_struct *mm)
 	pte_t *pte;
 
 	if (likely(mem_init_done)) {
-		pte = (pte_t *)get_zeroed_page(GFP_KERNEL);
+		pte = __pte_alloc_one_kernel(mm);
 	} else {
-		pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-		if (!pte)
-			panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-			      __func__, PAGE_SIZE, PAGE_SIZE);
+		pte = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 	}
 
 	return pte;
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index aa6a3cad275d..47fd9662d800 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -31,6 +31,9 @@ config PARISC
 	select HAVE_KERNEL_UNCOMPRESSED
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
+	select HAVE_PERF_REGS
+	select HAVE_PERF_USER_STACK_DUMP
+	select PERF_USE_VMALLOC
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZ4
@@ -44,6 +47,7 @@ config PARISC
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_ARCH_TOPOLOGY if SMP
+	select ARCH_SUPPORTS_SCHED_MC if SMP && PA8X00
 	select GENERIC_CPU_DEVICES if !SMP
 	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select SYSCTL_ARCH_UNALIGN_ALLOW
@@ -60,8 +64,8 @@ config PARISC
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HASH
-	select HAVE_ARCH_JUMP_LABEL
-	select HAVE_ARCH_JUMP_LABEL_RELATIVE
+	# select HAVE_ARCH_JUMP_LABEL
+	# select HAVE_ARCH_JUMP_LABEL_RELATIVE
 	select HAVE_ARCH_KFENCE
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
@@ -81,7 +85,6 @@ config PARISC
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_DYNAMIC_FTRACE if $(cc-option,-fpatchable-function-entry=1,1)
-	select HAVE_FTRACE_MCOUNT_RECORD if HAVE_DYNAMIC_FTRACE
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if DYNAMIC_FTRACE
 	select HAVE_KPROBES_ON_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
@@ -320,14 +323,6 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on GENERIC_ARCH_TOPOLOGY && PA8X00
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
 	default y
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 21b8166a6883..48ae3c79557a 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -39,7 +39,9 @@ endif
 
 export LD_BFD
 
-# Set default 32 bits cross compilers for vdso
+# Set default 32 bits cross compilers for vdso.
+# This means that for 64BIT, both the 64-bit tools and the 32-bit tools
+# need to be in the path.
 CC_ARCHES_32 = hppa hppa2.0 hppa1.1
 CC_SUFFIXES  = linux linux-gnu unknown-linux-gnu suse-linux
 CROSS32_COMPILE := $(call cc-cross-prefix, \
@@ -139,7 +141,7 @@ palo lifimage: vmlinuz
 	fi
 	@if test ! -f "$(PALOCONF)"; then \
 		cp $(srctree)/arch/parisc/defpalo.conf $(objtree)/palo.conf; \
-		echo 'A generic palo config file ($(objree)/palo.conf) has been created for you.'; \
+		echo 'A generic palo config file ($(objtree)/palo.conf) has been created for you.'; \
 		echo 'You should check it and re-run "make palo".'; \
 		echo 'WARNING: the "lifimage" file is now placed in this directory by default!'; \
 		false; \
diff --git a/arch/parisc/boot/compressed/Makefile b/arch/parisc/boot/compressed/Makefile
index 92227fa813dc..f8481e4e9d21 100644
--- a/arch/parisc/boot/compressed/Makefile
+++ b/arch/parisc/boot/compressed/Makefile
@@ -18,6 +18,7 @@ KBUILD_CFLAGS += -fno-PIE -mno-space-regs -mdisable-fpregs -Os
 ifndef CONFIG_64BIT
 KBUILD_CFLAGS += -mfast-indirect-calls
 endif
+KBUILD_CFLAGS += -std=gnu11 -fms-extensions
 
 LDFLAGS_vmlinux := -X -e startup --as-needed -T
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(addprefix $(obj)/, $(OBJECTS)) $(LIBGCC) FORCE
diff --git a/arch/parisc/configs/generic-32bit_defconfig b/arch/parisc/configs/generic-32bit_defconfig
index 5ce258f3fffa..5444ce6405f3 100644
--- a/arch/parisc/configs/generic-32bit_defconfig
+++ b/arch/parisc/configs/generic-32bit_defconfig
@@ -119,7 +119,6 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
 CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -132,11 +131,11 @@ CONFIG_I2C=y
 CONFIG_HWMON=m
 CONFIG_DRM=m
 CONFIG_DRM_DISPLAY_DP_AUX_CEC=y
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_SIL164 is not set
 CONFIG_DRM_RADEON=m
 CONFIG_DRM_NOUVEAU=m
 # CONFIG_DRM_NOUVEAU_BACKLIGHT is not set
+# CONFIG_DRM_NOUVEAU_CH7006 is not set
+# CONFIG_DRM_NOUVEAU_SIL164 is not set
 CONFIG_DRM_VGEM=m
 CONFIG_DRM_UDL=m
 CONFIG_DRM_MGAG200=m
@@ -232,8 +231,8 @@ CONFIG_AUXDISPLAY=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_QFMT_V2=y
@@ -251,7 +250,7 @@ CONFIG_CIFS=m
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 # CONFIG_CIFS_DEBUG is not set
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
@@ -264,8 +263,6 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
 CONFIG_FONTS=y
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig
index 19a804860ed5..ce91f9d1fdbf 100644
--- a/arch/parisc/configs/generic-64bit_defconfig
+++ b/arch/parisc/configs/generic-64bit_defconfig
@@ -158,7 +158,6 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_RAW=m
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_RUNTIME_UARTS=8
@@ -193,11 +192,11 @@ CONFIG_MEDIA_SUPPORT=m
 CONFIG_AGP=y
 CONFIG_AGP_PARISC=y
 CONFIG_DRM=y
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_SIL164 is not set
 CONFIG_DRM_RADEON=y
 CONFIG_DRM_NOUVEAU=m
 # CONFIG_DRM_NOUVEAU_BACKLIGHT is not set
+# CONFIG_DRM_NOUVEAU_CH7006 is not set
+# CONFIG_DRM_NOUVEAU_SIL164 is not set
 CONFIG_DRM_MGAG200=m
 CONFIG_FB=y
 CONFIG_FB_PM2=m
@@ -251,8 +250,8 @@ CONFIG_STAGING=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_XFS_FS=m
 CONFIG_BTRFS_FS=m
 CONFIG_QUOTA=y
@@ -268,7 +267,6 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_XATTR=y
 CONFIG_CONFIGFS_FS=y
-CONFIG_SYSV_FS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V4=m
 CONFIG_NFS_V4_1=y
@@ -284,7 +282,6 @@ CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
@@ -293,8 +290,6 @@ CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_LIBCRC32C=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_STRIP_ASM_SYMS=y
diff --git a/arch/parisc/include/asm/alternative.h b/arch/parisc/include/asm/alternative.h
index 1eb488f25b83..1601ae4b888d 100644
--- a/arch/parisc/include/asm/alternative.h
+++ b/arch/parisc/include/asm/alternative.h
@@ -13,7 +13,7 @@
 #define INSN_PxTLB	0x02		/* modify pdtlb, pitlb */
 #define INSN_NOP	0x08000240	/* nop */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/init.h>
 #include <linux/types.h>
@@ -61,6 +61,6 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end,
 	.word (new_instr_ptr - .)	!	\
 	.previous
 
-#endif  /*  __ASSEMBLY__  */
+#endif  /*  __ASSEMBLER__  */
 
 #endif /* __ASM_PARISC_ALTERNATIVE_H */
diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
index 000a28e1c5e8..c20261604f09 100644
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@@ -53,7 +53,7 @@
 #define SR_TEMP2	2
 #define SR_USER		3
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef CONFIG_64BIT
 #define LDREG	ldd
@@ -582,5 +582,5 @@
 	.previous
 
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif
diff --git a/arch/parisc/include/asm/barrier.h b/arch/parisc/include/asm/barrier.h
index c705decf2bed..519b1903c5ed 100644
--- a/arch/parisc/include/asm/barrier.h
+++ b/arch/parisc/include/asm/barrier.h
@@ -4,7 +4,7 @@
 
 #include <asm/alternative.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* The synchronize caches instruction executes as a nop on systems in
    which all memory references are performed in order. */
@@ -93,5 +93,5 @@ do {									\
 })
 #include <asm-generic/barrier.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 #endif /* __ASM_BARRIER_H */
diff --git a/arch/parisc/include/asm/bitops.h b/arch/parisc/include/asm/bitops.h
index 0ec9cfc5131f..bd1280a8a5ec 100644
--- a/arch/parisc/include/asm/bitops.h
+++ b/arch/parisc/include/asm/bitops.h
@@ -123,7 +123,7 @@ static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
  * cycles for each mispredicted branch.
  */
 
-static __inline__ unsigned long __ffs(unsigned long x)
+static __inline__ __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	unsigned long ret;
 
@@ -161,7 +161,7 @@ static __inline__ unsigned long __ffs(unsigned long x)
  * This is defined the same way as the libc and compiler builtin
  * ffs routines, therefore differs in spirit from the above ffz (man ffs).
  */
-static __inline__ int ffs(int x)
+static __inline__ __attribute_const__ int ffs(int x)
 {
 	return x ? (__ffs((unsigned long)x) + 1) : 0;
 }
@@ -171,7 +171,7 @@ static __inline__ int ffs(int x)
  * fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
 
-static __inline__ int fls(unsigned int x)
+static __inline__ __attribute_const__ int fls(unsigned int x)
 {
 	int ret;
 	if (!x)
diff --git a/arch/parisc/include/asm/bug.h b/arch/parisc/include/asm/bug.h
index 833555f74ffa..5cf35489ad80 100644
--- a/arch/parisc/include/asm/bug.h
+++ b/arch/parisc/include/asm/bug.h
@@ -2,8 +2,6 @@
 #ifndef _PARISC_BUG_H
 #define _PARISC_BUG_H
 
-#include <linux/kernel.h>	/* for BUGFLAG_TAINT */
-
 /*
  * Tell the user there is some problem.
  * The offending file and line are encoded in the __bug_table section.
@@ -50,7 +48,7 @@
 #endif
 
 #ifdef CONFIG_DEBUG_BUGVERBOSE
-#define __WARN_FLAGS(flags)						\
+#define __WARN_FLAGS(cond_str, flags)					\
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
@@ -61,12 +59,12 @@
 			     "\t.short %1, %2\n"			\
 			     "\t.blockz %3-2*4-2*2\n"			\
 			     "\t.popsection"				\
-			     : : "i" (__FILE__), "i" (__LINE__),	\
+			     : : "i" (WARN_CONDITION_STR(cond_str) __FILE__), "i" (__LINE__), \
 			     "i" (BUGFLAG_WARNING|(flags)),		\
 			     "i" (sizeof(struct bug_entry)) );		\
 	} while(0)
 #else
-#define __WARN_FLAGS(flags)						\
+#define __WARN_FLAGS(cond_str, flags)					\
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
diff --git a/arch/parisc/include/asm/cache.h b/arch/parisc/include/asm/cache.h
index a3f0f100f219..3f8d3be6ef24 100644
--- a/arch/parisc/include/asm/cache.h
+++ b/arch/parisc/include/asm/cache.h
@@ -16,7 +16,7 @@
 #define L1_CACHE_BYTES 16
 #define L1_CACHE_SHIFT 4
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define SMP_CACHE_BYTES L1_CACHE_BYTES
 
@@ -66,7 +66,7 @@ void parisc_setup_cache_timing(void);
 			ALTERNATIVE(ALT_COND_NO_IOC_FDC, INSN_NOP) :::"memory")
 #define asm_syncdma()	asm volatile("syncdma" :::"memory")
 
-#endif /* ! __ASSEMBLY__ */
+#endif /* ! __ASSEMBLER__ */
 
 /* Classes of processor wrt: disabling space register hashing */
 
diff --git a/arch/parisc/include/asm/current.h b/arch/parisc/include/asm/current.h
index dc7aea07c3f3..2814529a4c28 100644
--- a/arch/parisc/include/asm/current.h
+++ b/arch/parisc/include/asm/current.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_PARISC_CURRENT_H
 #define _ASM_PARISC_CURRENT_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 struct task_struct;
 
 static __always_inline struct task_struct *get_current(void)
@@ -16,6 +16,6 @@ static __always_inline struct task_struct *get_current(void)
 
 #define current get_current()
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_PARISC_CURRENT_H */
diff --git a/arch/parisc/include/asm/dwarf.h b/arch/parisc/include/asm/dwarf.h
index f4512db86a19..526f4a79262c 100644
--- a/arch/parisc/include/asm/dwarf.h
+++ b/arch/parisc/include/asm/dwarf.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_PARISC_DWARF_H
 #define _ASM_PARISC_DWARF_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define CFI_STARTPROC	.cfi_startproc
 #define CFI_ENDPROC	.cfi_endproc
@@ -15,6 +15,6 @@
 #define CFI_REL_OFFSET	.cfi_rel_offset
 #define CFI_UNDEFINED	.cfi_undefined
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* _ASM_PARISC_DWARF_H */
diff --git a/arch/parisc/include/asm/fixmap.h b/arch/parisc/include/asm/fixmap.h
index 5cd80ce1163a..9cafa449c4a7 100644
--- a/arch/parisc/include/asm/fixmap.h
+++ b/arch/parisc/include/asm/fixmap.h
@@ -39,7 +39,7 @@
 #define KERNEL_MAP_START	(GATEWAY_PAGE_SIZE)
 #define KERNEL_MAP_END		(FIXMAP_START)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 
 enum fixed_addresses {
@@ -59,6 +59,6 @@ extern void *parisc_vmalloc_start;
 void set_fixmap(enum fixed_addresses idx, phys_addr_t phys);
 void clear_fixmap(enum fixed_addresses idx);
 
-#endif /*__ASSEMBLY__*/
+#endif /*__ASSEMBLER__*/
 
 #endif /*_ASM_FIXMAP_H*/
diff --git a/arch/parisc/include/asm/floppy.h b/arch/parisc/include/asm/floppy.h
index b318a7df52f6..f15b69fea901 100644
--- a/arch/parisc/include/asm/floppy.h
+++ b/arch/parisc/include/asm/floppy.h
@@ -8,9 +8,9 @@
 #ifndef __ASM_PARISC_FLOPPY_H
 #define __ASM_PARISC_FLOPPY_H
 
+#include <linux/sizes.h>
 #include <linux/vmalloc.h>
 
-
 /*
  * The DMA channel used by the floppy controller cannot access data at
  * addresses >= 16MB
@@ -20,15 +20,12 @@
  * floppy accesses go through the track buffer.
  */
 #define _CROSS_64KB(a,s,vdma) \
-(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-
-#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
-
+	(!(vdma) && \
+	 ((unsigned long)(a) / SZ_64K != ((unsigned long)(a) + (s) - 1) / SZ_64K))
 
 #define SW fd_routine[use_virtual_dma&1]
 #define CSW fd_routine[can_use_virtual_dma & 1]
 
-
 #define fd_inb(base, reg)		readb((base) + (reg))
 #define fd_outb(value, base, reg)	writeb(value, (base) + (reg))
 
@@ -206,7 +203,7 @@ static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
 static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
 {
 #ifdef FLOPPY_SANITY_CHECK
-	if (CROSS_64KB(addr, size)) {
+	if (_CROSS_64KB(addr, size, use_virtual_dma & 1)) {
 		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
 		return -1;
 	}
diff --git a/arch/parisc/include/asm/ftrace.h b/arch/parisc/include/asm/ftrace.h
index f1cc1ee3a647..8b89d2b642eb 100644
--- a/arch/parisc/include/asm/ftrace.h
+++ b/arch/parisc/include/asm/ftrace.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_PARISC_FTRACE_H
 #define _ASM_PARISC_FTRACE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern void mcount(void);
 
 #define MCOUNT_ADDR		((unsigned long)mcount)
@@ -29,6 +29,6 @@ unsigned long ftrace_call_adjust(unsigned long addr);
 
 #define ftrace_return_address(n) return_address(n)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_PARISC_FTRACE_H */
diff --git a/arch/parisc/include/asm/hugetlb.h b/arch/parisc/include/asm/hugetlb.h
index 5b3a5429f71b..21e9ace17739 100644
--- a/arch/parisc/include/asm/hugetlb.h
+++ b/arch/parisc/include/asm/hugetlb.h
@@ -10,7 +10,7 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 
 #define __HAVE_ARCH_HUGE_PTEP_GET_AND_CLEAR
 pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep);
+			      pte_t *ptep, unsigned long sz);
 
 #define __HAVE_ARCH_HUGE_PTEP_CLEAR_FLUSH
 static inline pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h
index a63190af2f05..f01ad3ad60b5 100644
--- a/arch/parisc/include/asm/io.h
+++ b/arch/parisc/include/asm/io.h
@@ -131,17 +131,10 @@ static inline void gsc_writeq(unsigned long long val, unsigned long addr)
 		       _PAGE_ACCESSED | _PAGE_NO_CACHE)
 
 #define ioremap_wc(addr, size)  \
-	ioremap_prot((addr), (size), _PAGE_IOREMAP)
+	ioremap_prot((addr), (size), __pgprot(_PAGE_IOREMAP))
 
 #define pci_iounmap			pci_iounmap
 
-void memset_io(volatile void __iomem *addr, unsigned char val, int count);
-void memcpy_fromio(void *dst, const volatile void __iomem *src, int count);
-void memcpy_toio(volatile void __iomem *dst, const void *src, int count);
-#define memset_io memset_io
-#define memcpy_fromio memcpy_fromio
-#define memcpy_toio memcpy_toio
-
 /* Port-space IO */
 
 #define inb_p inb
@@ -231,36 +224,54 @@ extern void outsl (unsigned long port, const void *src, unsigned long count);
 #define F_EXTEND(x) ((unsigned long)((x) | (0xffffffff00000000ULL)))
 
 #ifdef CONFIG_64BIT
-#define ioread64 ioread64
-#define ioread64be ioread64be
-#define iowrite64 iowrite64
-#define iowrite64be iowrite64be
 extern u64 ioread64(const void __iomem *addr);
 extern u64 ioread64be(const void __iomem *addr);
+#define ioread64 ioread64
+#define ioread64be ioread64be
+
 extern void iowrite64(u64 val, void __iomem *addr);
 extern void iowrite64be(u64 val, void __iomem *addr);
+#define iowrite64 iowrite64
+#define iowrite64be iowrite64be
 #endif
 
-#include <asm-generic/iomap.h>
-/*
- * These get provided from <asm-generic/iomap.h> since parisc does not
- * select GENERIC_IOMAP.
- */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
 #define ioport_map ioport_map
 #define ioport_unmap ioport_unmap
+
+extern unsigned int ioread8(const void __iomem *);
+extern unsigned int ioread16(const void __iomem *);
+extern unsigned int ioread16be(const void __iomem *);
+extern unsigned int ioread32(const void __iomem *);
+extern unsigned int ioread32be(const void __iomem *);
 #define ioread8 ioread8
 #define ioread16 ioread16
 #define ioread32 ioread32
 #define ioread16be ioread16be
 #define ioread32be ioread32be
+
+extern void iowrite8(u8, void __iomem *);
+extern void iowrite16(u16, void __iomem *);
+extern void iowrite16be(u16, void __iomem *);
+extern void iowrite32(u32, void __iomem *);
+extern void iowrite32be(u32, void __iomem *);
 #define iowrite8 iowrite8
 #define iowrite16 iowrite16
 #define iowrite32 iowrite32
 #define iowrite16be iowrite16be
 #define iowrite32be iowrite32be
+
+extern void ioread8_rep(const void __iomem *port, void *buf, unsigned long count);
+extern void ioread16_rep(const void __iomem *port, void *buf, unsigned long count);
+extern void ioread32_rep(const void __iomem *port, void *buf, unsigned long count);
 #define ioread8_rep ioread8_rep
 #define ioread16_rep ioread16_rep
 #define ioread32_rep ioread32_rep
+
+extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
 #define iowrite8_rep iowrite8_rep
 #define iowrite16_rep iowrite16_rep
 #define iowrite32_rep iowrite32_rep
diff --git a/arch/parisc/include/asm/jump_label.h b/arch/parisc/include/asm/jump_label.h
index 317ebc5edc9f..f325ae3c622f 100644
--- a/arch/parisc/include/asm/jump_label.h
+++ b/arch/parisc/include/asm/jump_label.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_PARISC_JUMP_LABEL_H
 #define _ASM_PARISC_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/stringify.h>
@@ -44,5 +44,5 @@ l_yes:
 	return true;
 }
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif
diff --git a/arch/parisc/include/asm/kexec.h b/arch/parisc/include/asm/kexec.h
index 87e174006995..bf31e2d50df9 100644
--- a/arch/parisc/include/asm/kexec.h
+++ b/arch/parisc/include/asm/kexec.h
@@ -14,7 +14,7 @@
 #define KEXEC_ARCH KEXEC_ARCH_PARISC
 #define ARCH_HAS_KIMAGE_ARCH
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct kimage_arch {
 	unsigned long initrd_start;
@@ -28,6 +28,6 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 	/* Dummy implementation for now */
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_PARISC_KEXEC_H */
diff --git a/arch/parisc/include/asm/kgdb.h b/arch/parisc/include/asm/kgdb.h
index 317cd434bee3..9ece98bc6d9d 100644
--- a/arch/parisc/include/asm/kgdb.h
+++ b/arch/parisc/include/asm/kgdb.h
@@ -21,7 +21,7 @@
 
 #define CACHE_FLUSH_IS_SAFE		1
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline void arch_kgdb_breakpoint(void)
 {
diff --git a/arch/parisc/include/asm/linkage.h b/arch/parisc/include/asm/linkage.h
index cd6fe4febead..d4cad492b971 100644
--- a/arch/parisc/include/asm/linkage.h
+++ b/arch/parisc/include/asm/linkage.h
@@ -15,7 +15,7 @@
  */
 #define ASM_NL	!
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define ENTRY(name) \
 	ALIGN	!\
@@ -35,6 +35,6 @@ name:		ASM_NL\
 	.procend	ASM_NL\
 	ENDPROC(name)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif  /* __ASM_PARISC_LINKAGE_H */
diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index 7fd447092630..8f4e51071ea1 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -8,7 +8,7 @@
 
 #define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/types.h>
 #include <asm/cache.h>
@@ -93,7 +93,7 @@ typedef struct __physmem_range {
 extern physmem_range_t pmem_ranges[];
 extern int npmem_ranges;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* WARNING: The definitions below must match exactly to sizeof(pte_t)
  * etc
@@ -139,7 +139,7 @@ extern int npmem_ranges;
 #define KERNEL_BINARY_TEXT_START	(__PAGE_OFFSET + 0x100000)
 
 /* These macros don't work for 64-bit C code -- don't allow in C at all */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #   define PA(x)	((x)-__PAGE_OFFSET)
 #   define VA(x)	((x)+__PAGE_OFFSET)
 #endif
diff --git a/arch/parisc/include/asm/pdc.h b/arch/parisc/include/asm/pdc.h
index 5d2d9737e579..6080a1516b34 100644
--- a/arch/parisc/include/asm/pdc.h
+++ b/arch/parisc/include/asm/pdc.h
@@ -4,7 +4,7 @@
 
 #include <uapi/asm/pdc.h>
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 
 extern int parisc_narrow_firmware;
 
@@ -109,5 +109,5 @@ static inline char * os_id_to_string(u16 os_id) {
 	}
 }
 
-#endif /* !defined(__ASSEMBLY__) */
+#endif /* !defined(__ASSEMBLER__) */
 #endif /* _PARISC_PDC_H */
diff --git a/arch/parisc/include/asm/pdcpat.h b/arch/parisc/include/asm/pdcpat.h
index 8f160375b865..84ac81b1adde 100644
--- a/arch/parisc/include/asm/pdcpat.h
+++ b/arch/parisc/include/asm/pdcpat.h
@@ -210,7 +210,7 @@
 #define PDC_PAT_SYSTEM_INFO	76L
 /* PDC_PAT_SYSTEM_INFO uses the same options as PDC_SYSTEM_INFO function. */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 
 #ifdef CONFIG_64BIT
@@ -389,6 +389,6 @@ extern int pdc_pat_mem_get_dimm_phys_location(
                 struct pdc_pat_mem_phys_mem_location *pret,
                 unsigned long phys_addr);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* ! __PARISC_PATPDC_H */
diff --git a/arch/parisc/include/asm/perf_event.h b/arch/parisc/include/asm/perf_event.h
index 1e0fd8ba6c03..8a2925029d15 100644
--- a/arch/parisc/include/asm/perf_event.h
+++ b/arch/parisc/include/asm/perf_event.h
@@ -1,6 +1,12 @@
 #ifndef __ASM_PARISC_PERF_EVENT_H
 #define __ASM_PARISC_PERF_EVENT_H
 
-/* Empty, just to avoid compiling error */
+#include <asm/psw.h>
+
+#define perf_arch_fetch_caller_regs(regs, __ip) { \
+	(regs)->gr[0] = KERNEL_PSW; \
+	(regs)->iaoq[0] = (__ip); \
+	asm volatile("copy %%sp, %0\n":"=r"((regs)->gr[30])); \
+}
 
 #endif /* __ASM_PARISC_PERF_EVENT_H */
diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h
index e3e142b1c5c5..3b84ee93edaa 100644
--- a/arch/parisc/include/asm/pgalloc.h
+++ b/arch/parisc/include/asm/pgalloc.h
@@ -11,27 +11,12 @@
 #include <asm/cache.h>
 
 #define __HAVE_ARCH_PMD_ALLOC_ONE
-#define __HAVE_ARCH_PMD_FREE
-#define __HAVE_ARCH_PGD_FREE
 #include <asm-generic/pgalloc.h>
 
 /* Allocate the top level pgd (page directory) */
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	pgd_t *pgd;
-
-	pgd = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_TABLE_ORDER);
-	if (unlikely(pgd == NULL))
-		return NULL;
-
-	memset(pgd, 0, PAGE_SIZE << PGD_TABLE_ORDER);
-
-	return pgd;
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_pages((unsigned long)pgd, PGD_TABLE_ORDER);
+	return __pgd_alloc(mm, PGD_TABLE_ORDER);
 }
 
 #if CONFIG_PGTABLE_LEVELS == 3
@@ -46,17 +31,19 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 {
-	pmd_t *pmd;
-
-	pmd = (pmd_t *)__get_free_pages(GFP_PGTABLE_KERNEL, PMD_TABLE_ORDER);
-	if (likely(pmd))
-		memset ((void *)pmd, 0, PAGE_SIZE << PMD_TABLE_ORDER);
-	return pmd;
-}
+	struct ptdesc *ptdesc;
+	gfp_t gfp = GFP_PGTABLE_USER;
 
-static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	free_pages((unsigned long)pmd, PMD_TABLE_ORDER);
+	if (mm == &init_mm)
+		gfp = GFP_PGTABLE_KERNEL;
+	ptdesc = pagetable_alloc(gfp, PMD_TABLE_ORDER);
+	if (!ptdesc)
+		return NULL;
+	if (!pagetable_pmd_ctor(mm, ptdesc)) {
+		pagetable_free(ptdesc);
+		return NULL;
+	}
+	return ptdesc_address(ptdesc);
 }
 #endif
 
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index babf65751e81..2c139a4dbf4b 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -12,7 +12,7 @@
 
 #include <asm/fixmap.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * we simulate an x86-style page table for the linux mm code
  */
@@ -73,7 +73,7 @@ extern void __update_cache(pte_t pte);
 		mb();				\
 	} while(0)
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
@@ -226,7 +226,7 @@ extern void __update_cache(pte_t pte);
 #define PxD_FLAG_SHIFT    (4)
 #define PxD_VALUE_SHIFT   (PFN_PTE_SHIFT-PxD_FLAG_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_USER)
 #define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_WRITE)
@@ -276,7 +276,7 @@ extern unsigned long *empty_zero_page;
 #define pte_none(x)     (pte_val(x) == 0)
 #define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
 #define pte_user(x)	(pte_val(x) & _PAGE_USER)
-#define pte_clear(mm, addr, xp)  set_pte(xp, __pte(0))
+#define pte_clear(mm, addr, xp) set_pte_at((mm), (addr), (xp), __pte(0))
 
 #define pmd_flag(x)	(pmd_val(x) & PxD_FLAG_MASK)
 #define pmd_address(x)	((unsigned long)(pmd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT)
@@ -338,10 +338,6 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ pte_val(pte) |= _PAGE_SPECIAL; re
 #endif
 
 
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
 #define __mk_pte(addr,pgprot) \
 ({									\
 	pte_t __pte;							\
@@ -351,8 +347,6 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ pte_val(pte) |= _PAGE_SPECIAL; re
 	__pte;								\
 })
 
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
 {
 	pte_t pte;
@@ -398,6 +392,7 @@ static inline void set_ptes(struct mm_struct *mm, unsigned long addr,
 	}
 }
 #define set_ptes set_ptes
+#define set_pte_at(mm, addr, ptep, pte) set_ptes(mm, addr, ptep, pte, 1)
 
 /* Used for deferring calls to flush_dcache_page() */
 
@@ -431,7 +426,7 @@ static inline void set_ptes(struct mm_struct *mm, unsigned long addr,
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val })
 
-static inline int pte_swp_exclusive(pte_t pte)
+static inline bool pte_swp_exclusive(pte_t pte)
 {
 	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
 }
@@ -462,7 +457,7 @@ static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned
 	if (!pte_young(pte)) {
 		return 0;
 	}
-	set_pte(ptep, pte_mkold(pte));
+	set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte));
 	return 1;
 }
 
@@ -472,12 +467,12 @@ pte_t ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *pt
 struct mm_struct;
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
-	set_pte(ptep, pte_wrprotect(*ptep));
+	set_pte_at(mm, addr, ptep, pte_wrprotect(*ptep));
 }
 
 #define pte_same(A,B)	(pte_val(A) == pte_val(B))
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 
 /* TLB page size encoding - see table 3-1 in parisc20.pdf */
diff --git a/arch/parisc/include/asm/prefetch.h b/arch/parisc/include/asm/prefetch.h
index 6e63f720024d..748eefb27c68 100644
--- a/arch/parisc/include/asm/prefetch.h
+++ b/arch/parisc/include/asm/prefetch.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_PARISC_PREFETCH_H
 #define __ASM_PARISC_PREFETCH_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifdef CONFIG_PREFETCH
 
 #define ARCH_HAS_PREFETCH
@@ -40,6 +40,6 @@ static inline void prefetchw(const void *addr)
 #endif /* CONFIG_PA20 */
 
 #endif /* CONFIG_PREFETCH */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_PARISC_PROCESSOR_H */
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 77fac02188e1..dd0b5e199559 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_PARISC_PROCESSOR_H
 #define __ASM_PARISC_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/threads.h>
 #include <linux/irqreturn.h>
 
@@ -20,7 +20,7 @@
 #include <asm/ptrace.h>
 #include <asm/types.h>
 #include <asm/percpu.h>
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define HAVE_ARCH_PICK_MMAP_LAYOUT
 
@@ -45,10 +45,10 @@
 #define STACK_TOP	TASK_SIZE
 #define STACK_TOP_MAX	DEFAULT_TASK_SIZE
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct rlimit;
-unsigned long mmap_upper_limit(struct rlimit *rlim_stack);
+unsigned long mmap_upper_limit(const struct rlimit *rlim_stack);
 unsigned long calc_max_stack_size(unsigned long stack_max);
 
 /*
@@ -325,6 +325,6 @@ extern void sba_directed_lmmio(struct parisc_device *, struct resource *);
 extern void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask);
 extern void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_PARISC_PROCESSOR_H */
diff --git a/arch/parisc/include/asm/psw.h b/arch/parisc/include/asm/psw.h
index 46921ffcc407..9140e1ab7e63 100644
--- a/arch/parisc/include/asm/psw.h
+++ b/arch/parisc/include/asm/psw.h
@@ -60,7 +60,7 @@
 #define USER_PSW_MASK (WIDE_PSW | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
 #define USER_PSW      (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* The program status word as bitfields.  */
 struct pa_psw {
@@ -99,6 +99,6 @@ struct pa_psw {
 #define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW))
 #endif
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/parisc/include/asm/signal.h b/arch/parisc/include/asm/signal.h
index e84883c6b4c7..85c3d7409bbc 100644
--- a/arch/parisc/include/asm/signal.h
+++ b/arch/parisc/include/asm/signal.h
@@ -4,12 +4,12 @@
 
 #include <uapi/asm/signal.h>
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 
 /* Most things should be clean enough to redefine this at will, if care
    is taken to make libc match.  */
 
 #include <asm/sigcontext.h>
 
-#endif /* !__ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 #endif /* _ASM_PARISC_SIGNAL_H */
diff --git a/arch/parisc/include/asm/smp.h b/arch/parisc/include/asm/smp.h
index 94d1f21ce99a..0cf1c3a2696a 100644
--- a/arch/parisc/include/asm/smp.h
+++ b/arch/parisc/include/asm/smp.h
@@ -12,7 +12,7 @@ extern int init_per_cpu(int cpuid);
 #define PDC_OS_BOOT_RENDEZVOUS     0x10
 #define PDC_OS_BOOT_RENDEZVOUS_HI  0x28
 
-#ifndef ASSEMBLY
+#ifndef __ASSEMBLER__
 #include <linux/bitops.h>
 #include <linux/threads.h>	/* for NR_CPUS */
 #include <linux/cpumask.h>
@@ -34,7 +34,7 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
 #define raw_smp_processor_id()		(current_thread_info()->cpu)
 
-#endif /* !ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 
 #else /* CONFIG_SMP */
 
diff --git a/arch/parisc/include/asm/special_insns.h b/arch/parisc/include/asm/special_insns.h
index 51f40eaf7780..1013eeba31e5 100644
--- a/arch/parisc/include/asm/special_insns.h
+++ b/arch/parisc/include/asm/special_insns.h
@@ -32,6 +32,34 @@
 	pa;						\
 })
 
+/**
+ * prober_user() - Probe user read access
+ * @sr:		Space regster.
+ * @va:		Virtual address.
+ *
+ * Return: Non-zero if address is accessible.
+ *
+ * Due to the way _PAGE_READ is handled in TLB entries, we need
+ * a special check to determine whether a user address is accessible.
+ * The ldb instruction does the initial access check. If it is
+ * successful, the probe instruction checks user access rights.
+ */
+#define prober_user(sr, va)	({			\
+	unsigned long read_allowed;			\
+	__asm__ __volatile__(				\
+		"copy %%r0,%0\n"			\
+		"8:\tldb 0(%%sr%1,%2),%%r0\n"		\
+		"\tproberi (%%sr%1,%2),%3,%0\n"		\
+		"9:\n"					\
+		ASM_EXCEPTIONTABLE_ENTRY(8b, 9b,	\
+				"or %%r0,%%r0,%%r0")	\
+		: "=&r" (read_allowed)			\
+		: "i" (sr), "r" (va), "i" (PRIV_USER)	\
+		: "memory"				\
+	);						\
+	read_allowed;					\
+})
+
 #define CR_EIEM 15	/* External Interrupt Enable Mask */
 #define CR_CR16 16	/* CR16 Interval Timer */
 #define CR_EIRR 23	/* External Interrupt Request Register */
diff --git a/arch/parisc/include/asm/spinlock_types.h b/arch/parisc/include/asm/spinlock_types.h
index 7b986b09dba8..8e6889bc23cc 100644
--- a/arch/parisc/include/asm/spinlock_types.h
+++ b/arch/parisc/include/asm/spinlock_types.h
@@ -6,7 +6,7 @@
 
 #define SPINLOCK_BREAK_INSN	0x0000c006	/* break 6,6 */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef struct {
 	volatile unsigned int lock[4];
@@ -26,7 +26,7 @@ typedef struct {
 	volatile unsigned int	counter;
 } arch_rwlock_t;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define __ARCH_RW_LOCK_UNLOCKED__       0x01000000
 #define __ARCH_RW_LOCK_UNLOCKED         { .lock_mutex = __ARCH_SPIN_LOCK_UNLOCKED, \
diff --git a/arch/parisc/include/asm/syscall.h b/arch/parisc/include/asm/syscall.h
index 00b127a5e09b..c11222798ab2 100644
--- a/arch/parisc/include/asm/syscall.h
+++ b/arch/parisc/include/asm/syscall.h
@@ -17,6 +17,13 @@ static inline long syscall_get_nr(struct task_struct *tsk,
 	return regs->gr[20];
 }
 
+static inline void syscall_set_nr(struct task_struct *tsk,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->gr[20] = nr;
+}
+
 static inline void syscall_get_arguments(struct task_struct *tsk,
 					 struct pt_regs *regs,
 					 unsigned long *args)
@@ -29,6 +36,18 @@ static inline void syscall_get_arguments(struct task_struct *tsk,
 	args[0] = regs->gr[26];
 }
 
+static inline void syscall_set_arguments(struct task_struct *tsk,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	regs->gr[21] = args[5];
+	regs->gr[22] = args[4];
+	regs->gr[23] = args[3];
+	regs->gr[24] = args[2];
+	regs->gr[25] = args[1];
+	regs->gr[26] = args[0];
+}
+
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 1a58795f785c..b283738bb6da 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_PARISC_THREAD_INFO_H
 #define _ASM_PARISC_THREAD_INFO_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/processor.h>
 #include <asm/special_insns.h>
 
@@ -20,7 +20,7 @@ struct thread_info {
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 }
 
-#endif /* !__ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 
 /* thread information allocation */
 
diff --git a/arch/parisc/include/asm/traps.h b/arch/parisc/include/asm/traps.h
index 0ccdb738a9a3..10c8fb68e404 100644
--- a/arch/parisc/include/asm/traps.h
+++ b/arch/parisc/include/asm/traps.h
@@ -4,7 +4,7 @@
 
 #define PARISC_ITLB_TRAP	6 /* defined by architecture. Do not change. */
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 struct pt_regs;
 
 /* traps.c */
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index 88d0ae5769dd..6c531d2c847e 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -42,9 +42,24 @@
 	__gu_err;					\
 })
 
-#define __get_user(val, ptr)				\
-({							\
-	__get_user_internal(SR_USER, val, ptr);	\
+#define __probe_user_internal(sr, error, ptr)			\
+({								\
+	__asm__("\tproberi (%%sr%1,%2),%3,%0\n"			\
+		"\tcmpiclr,= 1,%0,%0\n"				\
+		"\tldi %4,%0\n"					\
+		: "=r"(error)					\
+		: "i"(sr), "r"(ptr), "i"(PRIV_USER),		\
+		  "i"(-EFAULT));				\
+})
+
+#define __get_user(val, ptr)					\
+({								\
+	register long __gu_err;					\
+								\
+	__gu_err = __get_user_internal(SR_USER, val, ptr);	\
+	if (likely(!__gu_err))					\
+		__probe_user_internal(SR_USER, __gu_err, ptr);	\
+	__gu_err;						\
 })
 
 #define __get_user_asm(sr, val, ldx, ptr)		\
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index a97c0fd55f91..3e46c6ea9df6 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -6,7 +6,7 @@
 
 #define __NR_Linux_syscalls	__NR_syscalls
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define SYS_ify(syscall_name)   __NR_##syscall_name
 
@@ -144,7 +144,7 @@
 #define __ARCH_WANT_SYS_UTIME
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #undef STR
 
diff --git a/arch/parisc/include/asm/vdso.h b/arch/parisc/include/asm/vdso.h
index 2a2dc11b5545..81bc1d42802a 100644
--- a/arch/parisc/include/asm/vdso.h
+++ b/arch/parisc/include/asm/vdso.h
@@ -2,7 +2,7 @@
 #ifndef __PARISC_VDSO_H__
 #define __PARISC_VDSO_H__
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_64BIT
 #include <generated/vdso64-offsets.h>
@@ -12,9 +12,7 @@
 #define VDSO64_SYMBOL(tsk, name) ((tsk)->mm->context.vdso_base + (vdso64_offset_##name))
 #define VDSO32_SYMBOL(tsk, name) ((tsk)->mm->context.vdso_base + (vdso32_offset_##name))
 
-extern struct vdso_data *vdso_data;
-
-#endif /* __ASSEMBLY __ */
+#endif /* __ASSEMBLER__ */
 
 /* Default link addresses for the vDSOs */
 #define VDSO_LBASE	0
diff --git a/arch/parisc/include/asm/video.h b/arch/parisc/include/asm/video.h
index c5dff3223194..a9d50ebd6e76 100644
--- a/arch/parisc/include/asm/video.h
+++ b/arch/parisc/include/asm/video.h
@@ -6,7 +6,7 @@
 
 struct device;
 
-#if defined(CONFIG_STI_CORE)
+#if defined(CONFIG_STI_CORE) && defined(CONFIG_VIDEO)
 bool video_is_primary_device(struct device *dev);
 #define video_is_primary_device video_is_primary_device
 #endif
diff --git a/arch/parisc/include/uapi/asm/ioctls.h b/arch/parisc/include/uapi/asm/ioctls.h
index 82d1148c6379..74b4027a4e80 100644
--- a/arch/parisc/include/uapi/asm/ioctls.h
+++ b/arch/parisc/include/uapi/asm/ioctls.h
@@ -10,10 +10,10 @@
 #define TCSETS		_IOW('T', 17, struct termios) /* TCSETATTR */
 #define TCSETSW		_IOW('T', 18, struct termios) /* TCSETATTRD */
 #define TCSETSF		_IOW('T', 19, struct termios) /* TCSETATTRF */
-#define TCGETA		_IOR('T', 1, struct termio)
-#define TCSETA		_IOW('T', 2, struct termio)
-#define TCSETAW		_IOW('T', 3, struct termio)
-#define TCSETAF		_IOW('T', 4, struct termio)
+#define TCGETA          0x40125401
+#define TCSETA          0x80125402
+#define TCSETAW         0x80125403
+#define TCSETAF         0x80125404
 #define TCSBRK		_IO('T', 5)
 #define TCXONC		_IO('T', 6)
 #define TCFLSH		_IO('T', 7)
diff --git a/arch/parisc/include/uapi/asm/pdc.h b/arch/parisc/include/uapi/asm/pdc.h
index fef4f2e96160..65031ddf8372 100644
--- a/arch/parisc/include/uapi/asm/pdc.h
+++ b/arch/parisc/include/uapi/asm/pdc.h
@@ -361,7 +361,7 @@
 /* size of the pdc_result buffer for firmware.c */
 #define NUM_PDC_RESULT	32
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 
 /* flags for hardware_path */
 #define	PF_AUTOBOOT	0x80
@@ -741,6 +741,6 @@ struct pdc_firm_test_get_rtn_block {   /* PDC_MODEL/PDC_FIRM_TEST_GET */
 #define PIRANHA_CPU_ID		0x13
 #define MAKO_CPU_ID		0x14
 
-#endif /* !defined(__ASSEMBLY__) */
+#endif /* !defined(__ASSEMBLER__) */
 
 #endif /* _UAPI_PARISC_PDC_H */
diff --git a/arch/parisc/include/uapi/asm/perf_regs.h b/arch/parisc/include/uapi/asm/perf_regs.h
new file mode 100644
index 000000000000..1ae687bb3d3c
--- /dev/null
+++ b/arch/parisc/include/uapi/asm/perf_regs.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_PARISC_PERF_REGS_H
+#define _UAPI_ASM_PARISC_PERF_REGS_H
+
+/* see struct user_regs_struct */
+enum perf_event_parisc_regs {
+	PERF_REG_PARISC_R0,	/* PSW is in gr[0] */
+	PERF_REG_PARISC_R1,
+	PERF_REG_PARISC_R2,
+	PERF_REG_PARISC_R3,
+	PERF_REG_PARISC_R4,
+	PERF_REG_PARISC_R5,
+	PERF_REG_PARISC_R6,
+	PERF_REG_PARISC_R7,
+	PERF_REG_PARISC_R8,
+	PERF_REG_PARISC_R9,
+	PERF_REG_PARISC_R10,
+	PERF_REG_PARISC_R11,
+	PERF_REG_PARISC_R12,
+	PERF_REG_PARISC_R13,
+	PERF_REG_PARISC_R14,
+	PERF_REG_PARISC_R15,
+	PERF_REG_PARISC_R16,
+	PERF_REG_PARISC_R17,
+	PERF_REG_PARISC_R18,
+	PERF_REG_PARISC_R19,
+	PERF_REG_PARISC_R20,
+	PERF_REG_PARISC_R21,
+	PERF_REG_PARISC_R22,
+	PERF_REG_PARISC_R23,
+	PERF_REG_PARISC_R24,
+	PERF_REG_PARISC_R25,
+	PERF_REG_PARISC_R26,
+	PERF_REG_PARISC_R27,
+	PERF_REG_PARISC_R28,
+	PERF_REG_PARISC_R29,
+	PERF_REG_PARISC_R30,
+	PERF_REG_PARISC_R31,
+
+	PERF_REG_PARISC_SR0,
+	PERF_REG_PARISC_SR1,
+	PERF_REG_PARISC_SR2,
+	PERF_REG_PARISC_SR3,
+	PERF_REG_PARISC_SR4,
+	PERF_REG_PARISC_SR5,
+	PERF_REG_PARISC_SR6,
+	PERF_REG_PARISC_SR7,
+
+	PERF_REG_PARISC_IAOQ0,
+	PERF_REG_PARISC_IAOQ1,
+	PERF_REG_PARISC_IASQ0,
+	PERF_REG_PARISC_IASQ1,
+
+	PERF_REG_PARISC_SAR,	/* CR11 */
+	PERF_REG_PARISC_IIR,	/* CR19 */
+	PERF_REG_PARISC_ISR,	/* CR20 */
+	PERF_REG_PARISC_IOR,	/* CR21 */
+	PERF_REG_PARISC_IPSW,	/* CR22 */
+
+	PERF_REG_PARISC_MAX
+};
+
+#endif /* _UAPI_ASM_PARISC_PERF_REGS_H */
diff --git a/arch/parisc/include/uapi/asm/signal.h b/arch/parisc/include/uapi/asm/signal.h
index 40d7a574c5dd..d99accf37341 100644
--- a/arch/parisc/include/uapi/asm/signal.h
+++ b/arch/parisc/include/uapi/asm/signal.h
@@ -61,7 +61,7 @@
 #define _NSIG_BPW	(sizeof(unsigned long) * 8)
 #define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 
 #  include <linux/types.h>
 
@@ -80,5 +80,5 @@ typedef struct sigaltstack {
 	__kernel_size_t ss_size;
 } stack_t;
 
-#endif /* !__ASSEMBLY */
+#endif /* !__ASSEMBLER__ */
 #endif /* _UAPI_ASM_PARISC_SIGNAL_H */
diff --git a/arch/parisc/include/uapi/asm/socket.h b/arch/parisc/include/uapi/asm/socket.h
index d268d69bfcd2..c16ec36dfee6 100644
--- a/arch/parisc/include/uapi/asm/socket.h
+++ b/arch/parisc/include/uapi/asm/socket.h
@@ -132,13 +132,20 @@
 #define SO_PASSPIDFD		0x404A
 #define SO_PEERPIDFD		0x404B
 
-#define SO_DEVMEM_LINEAR	78
+#define SCM_TS_OPT_ID		0x404C
+
+#define SO_RCVPRIORITY		0x404D
+
+#define SO_DEVMEM_LINEAR	0x404E
 #define SCM_DEVMEM_LINEAR	SO_DEVMEM_LINEAR
-#define SO_DEVMEM_DMABUF	79
+#define SO_DEVMEM_DMABUF	0x404F
 #define SCM_DEVMEM_DMABUF	SO_DEVMEM_DMABUF
-#define SO_DEVMEM_DONTNEED	80
+#define SO_DEVMEM_DONTNEED	0x4050
 
-#define SCM_TS_OPT_ID		0x404C
+#define SO_PASSRIGHTS		0x4051
+
+#define SO_INQ			0x4052
+#define SCM_INQ			SO_INQ
 
 #if !defined(__KERNEL__)
 
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 5ab0467be70a..9157bc8bdf41 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -3,7 +3,7 @@
 # Makefile for arch/parisc/kernel
 #
 
-extra-y		:= vmlinux.lds
+always-$(KBUILD_BUILTIN)		:= vmlinux.lds
 
 obj-y		:= head.o cache.o pacache.o setup.o pdt.o traps.o time.o irq.o \
 		   syscall.o entry.o sys_parisc.o firmware.o \
@@ -38,6 +38,7 @@ obj-$(CONFIG_GENERIC_ARCH_TOPOLOGY)	+= topology.o
 obj-$(CONFIG_FUNCTION_TRACER)		+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
+obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o perf_regs.o
 obj-$(CONFIG_KGDB)			+= kgdb.o
 obj-$(CONFIG_KPROBES)			+= kprobes.o
 obj-$(CONFIG_KEXEC_CORE)		+= kexec.o relocate_kernel.o
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 757816a7bd4b..3de4b5933b10 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -13,6 +13,7 @@
  *    Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
  *    Copyright (C) 2003 James Bottomley <jejb at parisc-linux.org>
  */
+#define COMPILE_OFFSETS
 
 #include <linux/types.h>
 #include <linux/sched.h>
@@ -257,6 +258,8 @@ int main(void)
 	BLANK();
 	DEFINE(TIF_BLOCKSTEP_PA_BIT, 31-TIF_BLOCKSTEP);
 	DEFINE(TIF_SINGLESTEP_PA_BIT, 31-TIF_SINGLESTEP);
+	DEFINE(TIF_32BIT_PA_BIT, 31-TIF_32BIT);
+
 	BLANK();
 	DEFINE(ASM_PMD_SHIFT, PMD_SHIFT);
 	DEFINE(ASM_PGDIR_SHIFT, PGDIR_SHIFT);
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index db531e58d70e..4c5240d3a3c7 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -122,10 +122,10 @@ void __update_cache(pte_t pte)
 	pfn = folio_pfn(folio);
 	nr = folio_nr_pages(folio);
 	if (folio_flush_mapping(folio) &&
-	    test_bit(PG_dcache_dirty, &folio->flags)) {
+	    test_bit(PG_dcache_dirty, &folio->flags.f)) {
 		while (nr--)
 			flush_kernel_dcache_page_addr(pfn_va(pfn + nr));
-		clear_bit(PG_dcache_dirty, &folio->flags);
+		clear_bit(PG_dcache_dirty, &folio->flags.f);
 	} else if (parisc_requires_coherency())
 		while (nr--)
 			flush_kernel_dcache_page_addr(pfn_va(pfn + nr));
@@ -429,7 +429,7 @@ static inline pte_t *get_ptep(struct mm_struct *mm, unsigned long addr)
 	return ptep;
 }
 
-static inline bool pte_needs_flush(pte_t pte)
+static inline bool pte_needs_cache_flush(pte_t pte)
 {
 	return (pte_val(pte) & (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_NO_CACHE))
 		== (_PAGE_PRESENT | _PAGE_ACCESSED);
@@ -481,7 +481,7 @@ void flush_dcache_folio(struct folio *folio)
 	pgoff_t pgoff;
 
 	if (mapping && !mapping_mapped(mapping)) {
-		set_bit(PG_dcache_dirty, &folio->flags);
+		set_bit(PG_dcache_dirty, &folio->flags.f);
 		return;
 	}
 
@@ -630,7 +630,7 @@ static void flush_cache_page_if_present(struct vm_area_struct *vma,
 	ptep = get_ptep(vma->vm_mm, vmaddr);
 	if (ptep) {
 		pte = ptep_get(ptep);
-		needs_flush = pte_needs_flush(pte);
+		needs_flush = pte_needs_cache_flush(pte);
 		pte_unmap(ptep);
 	}
 	if (needs_flush)
@@ -841,7 +841,7 @@ void flush_cache_vmap(unsigned long start, unsigned long end)
 	}
 
 	vm = find_vm_area((void *)start);
-	if (WARN_ON_ONCE(!vm)) {
+	if (!vm) {
 		flush_cache_all();
 		return;
 	}
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index 1e793f770f71..8d23fe42b0ce 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -995,6 +995,7 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
 	struct pdc_system_map_mod_info pdc_mod_info;
 	struct pdc_module_path mod_path;
 
+	memset(&iodc_data, 0, sizeof(iodc_data));
 	status = pdc_iodc_read(&count, hpa, 0,
 		&iodc_data, sizeof(iodc_data));
 	if (status != PDC_OK) {
@@ -1012,6 +1013,11 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
 
 	mod_index = 0;
 	do {
+		/* initialize device path for old machines */
+		memset(&mod_path, 0xff, sizeof(mod_path));
+		get_node_path(dev->dev.parent, &mod_path.path);
+		mod_path.path.mod = dev->hw_path;
+		memset(&pdc_mod_info, 0, sizeof(pdc_mod_info));
 		status = pdc_system_map_find_mods(&pdc_mod_info,
 				&mod_path, mod_index++);
 	} while (status == PDC_OK && pdc_mod_info.mod_addr != hpa);
@@ -1037,11 +1043,7 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
 		(unsigned char)mod_path.path.bc[3],
 		(unsigned char)mod_path.path.bc[4],
 		(unsigned char)mod_path.path.bc[5]);
-	pr_cont(".mod = 0x%x ", mod_path.path.mod);
-	pr_cont(" },\n");
-	pr_cont("\t.layers = { 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x }\n",
-		mod_path.layers[0], mod_path.layers[1], mod_path.layers[2],
-		mod_path.layers[3], mod_path.layers[4], mod_path.layers[5]);
+	pr_cont(".mod = 0x%x }\n", mod_path.path.mod);
 	pr_cont("};\n");
 
 	pr_info("static struct pdc_iodc iodc_data_hpa_%08lx = {\n", hpa);
@@ -1061,8 +1063,6 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
 	DO(checksum);
 	DO(length);
 	#undef DO
-	pr_cont("\t/* pad: 0x%04x, 0x%04x */\n",
-		iodc_data.pad[0], iodc_data.pad[1]);
 	pr_cont("};\n");
 
 	pr_info("#define HPA_%08lx_num_addr %d\n", hpa, dev->num_addrs);
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index ea57bcc21dc5..e04c5d806c10 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -499,6 +499,12 @@
 	 * this happens is quite subtle, read below */
 	.macro		make_insert_tlb	spc,pte,prot,tmp
 	space_to_prot   \spc \prot        /* create prot id from space */
+
+#if _PAGE_SPECIAL_BIT == _PAGE_DMB_BIT
+	/* need to drop DMB bit, as it's used as SPECIAL flag */
+	depi		0,_PAGE_SPECIAL_BIT,1,\pte
+#endif
+
 	/* The following is the real subtlety.  This is depositing
 	 * T <-> _PAGE_REFTRAP
 	 * D <-> _PAGE_DIRTY
@@ -511,17 +517,18 @@
 	 * Finally, _PAGE_READ goes in the top bit of PL1 (so we
 	 * trigger an access rights trap in user space if the user
 	 * tries to read an unreadable page */
-#if _PAGE_SPECIAL_BIT == _PAGE_DMB_BIT
-	/* need to drop DMB bit, as it's used as SPECIAL flag */
-	depi		0,_PAGE_SPECIAL_BIT,1,\pte
-#endif
 	depd            \pte,8,7,\prot
 
 	/* PAGE_USER indicates the page can be read with user privileges,
 	 * so deposit X1|11 to PL1|PL2 (remember the upper bit of PL1
-	 * contains _PAGE_READ) */
+	 * contains _PAGE_READ). While the kernel can't directly write
+	 * user pages which have _PAGE_WRITE zero, it can read pages
+	 * which have _PAGE_READ zero (PL <= PL1). Thus, the kernel
+	 * exception fault handler doesn't trigger when reading pages
+	 * that aren't user read accessible */
 	extrd,u,*=      \pte,_PAGE_USER_BIT+32,1,%r0
 	depdi		7,11,3,\prot
+
 	/* If we're a gateway page, drop PL2 back to zero for promotion
 	 * to kernel privilege (so we can execute the page as kernel).
 	 * Any privilege promotion page always denys read and write */
@@ -1052,8 +1059,6 @@ ENTRY_CFI(intr_save)		/* for os_hpmc */
 	STREG           %r17, PT_IOR(%r29)
 
 #if defined(CONFIG_64BIT)
-	b,n		intr_save2
-
 skip_save_ior:
 	/* We have a itlb miss, and when executing code above 4 Gb on ILP64, we
 	 * need to adjust iasq/iaoq here in the same way we adjusted isr/ior
@@ -1062,10 +1067,17 @@ skip_save_ior:
 	bb,COND(>=),n	%r8,PSW_W_BIT,intr_save2
 	LDREG		PT_IASQ0(%r29), %r16
 	LDREG		PT_IAOQ0(%r29), %r17
-	/* adjust iasq/iaoq */
+	/* adjust iasq0/iaoq0 */
 	space_adjust	%r16,%r17,%r1
 	STREG           %r16, PT_IASQ0(%r29)
 	STREG           %r17, PT_IAOQ0(%r29)
+
+	LDREG		PT_IASQ1(%r29), %r16
+	LDREG		PT_IAOQ1(%r29), %r17
+	/* adjust iasq1/iaoq1 */
+	space_adjust	%r16,%r17,%r1
+	STREG           %r16, PT_IASQ1(%r29)
+	STREG           %r17, PT_IAOQ1(%r29)
 #else
 skip_save_ior:
 #endif
@@ -1834,6 +1846,10 @@ syscall_restore_rfi:
 	extru,= %r19,TIF_BLOCKSTEP_PA_BIT,1,%r0
 	depi	-1,7,1,%r20			   /* T bit */
 
+#ifdef CONFIG_64BIT
+	extru,<> %r19,TIF_32BIT_PA_BIT,1,%r0
+	depi	-1,4,1,%r20			   /* W bit */
+#endif
 	STREG	%r20,TASK_PT_PSW(%r1)
 
 	/* Always store space registers, since sr3 can be changed (e.g. fork) */
@@ -1847,7 +1863,6 @@ syscall_restore_rfi:
 	STREG   %r25,TASK_PT_IASQ0(%r1)
 	STREG   %r25,TASK_PT_IASQ1(%r1)
 
-	/* XXX W bit??? */
 	/* Now if old D bit is clear, it means we didn't save all registers
 	 * on syscall entry, so do that now.  This only happens on TRACEME
 	 * calls, or if someone attached to us while we were on a syscall.
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index c69f6d5946e9..042343492a28 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -464,7 +464,8 @@ int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
 	unsigned long flags;
 
 	spin_lock_irqsave(&pdc_lock, flags);
-	retval = mem_pdc_call(PDC_SYSTEM_MAP, PDC_FIND_MODULE, __pa(pdc_result), 
+	memcpy(pdc_result2, mod_path, sizeof(*mod_path));
+	retval = mem_pdc_call(PDC_SYSTEM_MAP, PDC_FIND_MODULE, __pa(pdc_result),
 			      __pa(pdc_result2), mod_index);
 	convert_to_wide(pdc_result);
 	memcpy(pdc_mod_info, pdc_result, sizeof(*pdc_mod_info));
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index c1587aa35beb..509146a52725 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -43,9 +43,6 @@ EXPORT_SYMBOL($global$);
 #endif
 
 #include <asm/io.h>
-EXPORT_SYMBOL(memcpy_toio);
-EXPORT_SYMBOL(memcpy_fromio);
-EXPORT_SYMBOL(memset_io);
 
 extern void $$divI(void);
 extern void $$divU(void);
diff --git a/arch/parisc/kernel/pdt.c b/arch/parisc/kernel/pdt.c
index 0f9b3b5914cf..b70b67adb855 100644
--- a/arch/parisc/kernel/pdt.c
+++ b/arch/parisc/kernel/pdt.c
@@ -63,6 +63,7 @@ static unsigned long pdt_entry[MAX_PDT_ENTRIES] __page_aligned_bss;
 #define PDT_ADDR_PERM_ERR	(pdt_type != PDT_PDC ? 2UL : 0UL)
 #define PDT_ADDR_SINGLE_ERR	1UL
 
+#ifdef CONFIG_PROC_FS
 /* report PDT entries via /proc/meminfo */
 void arch_report_meminfo(struct seq_file *m)
 {
@@ -74,6 +75,7 @@ void arch_report_meminfo(struct seq_file *m)
 	seq_printf(m, "PDT_cur_entries: %7lu\n",
 			pdt_status.pdt_entries);
 }
+#endif
 
 static int get_info_pat_new(void)
 {
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index 5e8e37a722ef..5e10f98ce7b5 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -475,9 +475,9 @@ static const struct file_operations perf_fops = {
 };
 
 static struct miscdevice perf_dev = {
-	MISC_DYNAMIC_MINOR,
-	PA_PERF_DEV,
-	&perf_fops
+	.minor	= MISC_DYNAMIC_MINOR,
+	.name	= PA_PERF_DEV,
+	.fops	= &perf_fops,
 };
 
 /*
diff --git a/arch/parisc/kernel/perf_event.c b/arch/parisc/kernel/perf_event.c
new file mode 100644
index 000000000000..f90b83886ab4
--- /dev/null
+++ b/arch/parisc/kernel/perf_event.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Performance event support for parisc
+ *
+ * Copyright (C) 2025 by Helge Deller <deller@gmx.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <asm/unwind.h>
+
+void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
+			   struct pt_regs *regs)
+{
+
+	struct unwind_frame_info info;
+
+	unwind_frame_init_task(&info, current, NULL);
+	while (1) {
+		if (unwind_once(&info) < 0 || info.ip == 0)
+			break;
+
+		if (!__kernel_text_address(info.ip) ||
+			perf_callchain_store(entry, info.ip))
+				return;
+	}
+}
diff --git a/arch/parisc/kernel/perf_regs.c b/arch/parisc/kernel/perf_regs.c
new file mode 100644
index 000000000000..10a1a5f06a18
--- /dev/null
+++ b/arch/parisc/kernel/perf_regs.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Copyright (C) 2025 by Helge Deller <deller@gmx.de> */
+
+#include <linux/perf_event.h>
+#include <linux/perf_regs.h>
+#include <asm/ptrace.h>
+
+u64 perf_reg_value(struct pt_regs *regs, int idx)
+{
+	switch (idx) {
+	case PERF_REG_PARISC_R0 ... PERF_REG_PARISC_R31:
+		return regs->gr[idx - PERF_REG_PARISC_R0];
+	case PERF_REG_PARISC_SR0 ... PERF_REG_PARISC_SR7:
+		return regs->sr[idx - PERF_REG_PARISC_SR0];
+	case PERF_REG_PARISC_IASQ0 ... PERF_REG_PARISC_IASQ1:
+		return regs->iasq[idx - PERF_REG_PARISC_IASQ0];
+	case PERF_REG_PARISC_IAOQ0 ... PERF_REG_PARISC_IAOQ1:
+		return regs->iasq[idx - PERF_REG_PARISC_IAOQ0];
+	case PERF_REG_PARISC_SAR:	/* CR11 */
+		return regs->sar;
+	case PERF_REG_PARISC_IIR:	/* CR19 */
+		return regs->iir;
+	case PERF_REG_PARISC_ISR:	/* CR20 */
+		return regs->isr;
+	case PERF_REG_PARISC_IOR:	/* CR21 */
+		return regs->ior;
+	case PERF_REG_PARISC_IPSW:	/* CR22 */
+		return regs->ipsw;
+	}
+	WARN_ON_ONCE((u32)idx >= PERF_REG_PARISC_MAX);
+	return 0;
+}
+
+#define REG_RESERVED (~((1ULL << PERF_REG_PARISC_MAX) - 1))
+
+int perf_reg_validate(u64 mask)
+{
+	if (!mask || mask & REG_RESERVED)
+		return -EINVAL;
+
+	return 0;
+}
+
+u64 perf_reg_abi(struct task_struct *task)
+{
+	if (!IS_ENABLED(CONFIG_64BIT))
+		return PERF_SAMPLE_REGS_ABI_32;
+
+	if (test_tsk_thread_flag(task, TIF_32BIT))
+		return PERF_SAMPLE_REGS_ABI_32;
+
+	return PERF_SAMPLE_REGS_ABI_64;
+}
+
+void perf_get_regs_user(struct perf_regs *regs_user,
+			struct pt_regs *regs)
+{
+	regs_user->regs = task_pt_regs(current);
+	regs_user->abi = perf_reg_abi(current);
+}
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index ed93bd8c1545..e64ab5d2a40d 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -201,7 +201,7 @@ arch_initcall(parisc_idle_init);
 int
 copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *cregs = &(p->thread.regs);
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index ceb45f51d52e..8a17ab7e6e0b 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -562,12 +562,12 @@ static int gpr_set(struct task_struct *target,
 
 static const struct user_regset native_regsets[] = {
 	[REGSET_GENERAL] = {
-		.core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
+		USER_REGSET_NOTE_TYPE(PRSTATUS), .n = ELF_NGREG,
 		.size = sizeof(long), .align = sizeof(long),
 		.regset_get = gpr_get, .set = gpr_set
 	},
 	[REGSET_FP] = {
-		.core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
+		USER_REGSET_NOTE_TYPE(PRFPREG), .n = ELF_NFPREG,
 		.size = sizeof(__u64), .align = sizeof(__u64),
 		.regset_get = fpr_get, .set = fpr_set
 	}
@@ -629,12 +629,12 @@ static int gpr32_set(struct task_struct *target,
  */
 static const struct user_regset compat_regsets[] = {
 	[REGSET_GENERAL] = {
-		.core_note_type = NT_PRSTATUS, .n = ELF_NGREG,
+		USER_REGSET_NOTE_TYPE(PRSTATUS), .n = ELF_NGREG,
 		.size = sizeof(compat_long_t), .align = sizeof(compat_long_t),
 		.regset_get = gpr32_get, .set = gpr32_set
 	},
 	[REGSET_FP] = {
-		.core_note_type = NT_PRFPREG, .n = ELF_NFPREG,
+		USER_REGSET_NOTE_TYPE(PRFPREG), .n = ELF_NFPREG,
 		.size = sizeof(__u64), .align = sizeof(__u64),
 		.regset_get = fpr_get, .set = fpr_set
 	}
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index f852fe274abe..b2cdbb8a12b1 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -77,7 +77,7 @@ unsigned long calc_max_stack_size(unsigned long stack_max)
  * indicating that "current" should be used instead of a passed-in
  * value from the exec bprm as done with arch_pick_mmap_layout().
  */
-unsigned long mmap_upper_limit(struct rlimit *rlim_stack)
+unsigned long mmap_upper_limit(const struct rlimit *rlim_stack)
 {
 	unsigned long stack_base;
 
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 0fa81bf1466b..f58c4bccfbce 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -613,6 +613,9 @@ lws_compare_and_swap32:
 lws_compare_and_swap:
 	/* Trigger memory reference interruptions without writing to memory */
 1:	ldw	0(%r26), %r28
+	proberi	(%r26), PRIV_USER, %r28
+	comb,=,n	%r28, %r0, lws_fault /* backwards, likely not taken */
+	nop
 2:	stbys,e	%r0, 0(%r26)
 
 	/* Calculate 8-bit hash index from virtual address */
@@ -767,6 +770,9 @@ cas2_lock_start:
 	copy	%r26, %r28
 	depi_safe	0, 31, 2, %r28
 10:	ldw	0(%r28), %r1
+	proberi	(%r28), PRIV_USER, %r1
+	comb,=,n	%r1, %r0, lws_fault /* backwards, likely not taken */
+	nop
 11:	stbys,e	%r0, 0(%r28)
 
 	/* Calculate 8-bit hash index from virtual address */
@@ -951,41 +957,47 @@ atomic_xchg_begin:
 
 	/* 8-bit exchange */
 1:	ldb	0(%r24), %r20
+	proberi	(%r24), PRIV_USER, %r20
+	comb,=,n	%r20, %r0, lws_fault /* backwards, likely not taken */
+	nop
 	copy	%r23, %r20
 	depi_safe	0, 31, 2, %r20
 	b	atomic_xchg_start
 2:	stbys,e	%r0, 0(%r20)
-	nop
-	nop
-	nop
 
 	/* 16-bit exchange */
 3:	ldh	0(%r24), %r20
+	proberi	(%r24), PRIV_USER, %r20
+	comb,=,n	%r20, %r0, lws_fault /* backwards, likely not taken */
+	nop
 	copy	%r23, %r20
 	depi_safe	0, 31, 2, %r20
 	b	atomic_xchg_start
 4:	stbys,e	%r0, 0(%r20)
-	nop
-	nop
-	nop
 
 	/* 32-bit exchange */
 5:	ldw	0(%r24), %r20
+	proberi	(%r24), PRIV_USER, %r20
+	comb,=,n	%r20, %r0, lws_fault /* backwards, likely not taken */
+	nop
 	b	atomic_xchg_start
 6:	stbys,e	%r0, 0(%r23)
 	nop
 	nop
-	nop
-	nop
-	nop
 
 	/* 64-bit exchange */
 #ifdef CONFIG_64BIT
 7:	ldd	0(%r24), %r20
+	proberi	(%r24), PRIV_USER, %r20
+	comb,=,n	%r20, %r0, lws_fault /* backwards, likely not taken */
+	nop
 8:	stdby,e	%r0, 0(%r23)
 #else
 7:	ldw	0(%r24), %r20
 8:	ldw	4(%r24), %r20
+	proberi	(%r24), PRIV_USER, %r20
+	comb,=,n	%r20, %r0, lws_fault /* backwards, likely not taken */
+	nop
 	copy	%r23, %r20
 	depi_safe	0, 31, 2, %r20
 9:	stbys,e	%r0, 0(%r20)
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index d9fc94c86965..39bdacaa530b 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -465,3 +465,7 @@
 464	common	getxattrat			sys_getxattrat
 465	common	listxattrat			sys_listxattrat
 466	common	removexattrat			sys_removexattrat
+467	common	open_tree_attr			sys_open_tree_attr
+468	common	file_getattr			sys_file_getattr
+469	common	file_setattr			sys_file_setattr
+470	common	listns				sys_listns
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index b9b3d527bc90..4c7c5df80bd0 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -31,6 +31,7 @@
 #include <linux/uaccess.h>
 #include <linux/kdebug.h>
 #include <linux/kfence.h>
+#include <linux/perf_event.h>
 
 #include <asm/assembly.h>
 #include <asm/io.h>
@@ -633,6 +634,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 		/* Assist Exception Trap, i.e. floating point exception. */
 		die_if_kernel("Floating point exception", regs, 0); /* quiet */
 		__inc_irq_stat(irq_fpassist_count);
+		perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
 		handle_fpe(regs);
 		return;
 
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index f4626943633a..fb64d9ce0b17 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -13,6 +13,7 @@
 #include <linux/uaccess.h>
 #include <linux/sysctl.h>
 #include <linux/unaligned.h>
+#include <linux/perf_event.h>
 #include <asm/hardirq.h>
 #include <asm/traps.h>
 #include "unaligned.h"
@@ -25,7 +26,7 @@
 #define DPRINTF(fmt, args...)
 #endif
 
-#define RFMT "%#08lx"
+#define RFMT "0x%08lx"
 
 /* 1111 1100 0000 0000 0001 0011 1100 0000 */
 #define OPCODE1(a,b,c)	((a)<<26|(b)<<12|(c)<<6) 
@@ -378,6 +379,7 @@ void handle_unaligned(struct pt_regs *regs)
 	int ret = ERR_NOTHANDLED;
 
 	__inc_irq_stat(irq_unaligned_count);
+	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, regs->ior);
 
 	/* log a message with pacing */
 	if (user_mode(regs)) {
diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c
index f7e0fee5ee55..7ac88ff13d3c 100644
--- a/arch/parisc/kernel/unwind.c
+++ b/arch/parisc/kernel/unwind.c
@@ -35,6 +35,8 @@
 
 #define KERNEL_START (KERNEL_BINARY_TEXT_START)
 
+#define ALIGNMENT_OK(ptr, type) (((ptr) & (sizeof(type) - 1)) == 0)
+
 extern struct unwind_table_entry __start___unwind[];
 extern struct unwind_table_entry __stop___unwind[];
 
@@ -257,12 +259,15 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int
 	if (pc_is_kernel_fn(pc, _switch_to) ||
 	    pc == (unsigned long)&_switch_to_ret) {
 		info->prev_sp = info->sp - CALLEE_SAVE_FRAME_SIZE;
-		info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET);
+		if (ALIGNMENT_OK(info->prev_sp, long))
+			info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET);
+		else
+			info->prev_ip = info->prev_sp = 0;
 		return 1;
 	}
 
 #ifdef CONFIG_IRQSTACKS
-	if (pc == (unsigned long)&_call_on_stack) {
+	if (pc == (unsigned long)&_call_on_stack && ALIGNMENT_OK(info->sp, long)) {
 		info->prev_sp = *(unsigned long *)(info->sp - FRAME_SIZE - REG_SZ);
 		info->prev_ip = *(unsigned long *)(info->sp - FRAME_SIZE - RP_OFFSET);
 		return 1;
@@ -370,8 +375,10 @@ static void unwind_frame_regs(struct unwind_frame_info *info)
 			info->prev_sp = info->sp - frame_size;
 			if (e->Millicode)
 				info->rp = info->r31;
-			else if (rpoffset)
+			else if (rpoffset && ALIGNMENT_OK(info->prev_sp, long))
 				info->rp = *(unsigned long *)(info->prev_sp - rpoffset);
+			else
+				info->rp = 0;
 			info->prev_ip = info->rp;
 			info->rp = 0;
 		}
diff --git a/arch/parisc/kernel/vdso32/Makefile b/arch/parisc/kernel/vdso32/Makefile
index 2b36d25ada6e..4ee8d17da229 100644
--- a/arch/parisc/kernel/vdso32/Makefile
+++ b/arch/parisc/kernel/vdso32/Makefile
@@ -1,5 +1,5 @@
 # Include the generic Makefile to check the built vdso.
-include $(srctree)/lib/vdso/Makefile
+include $(srctree)/lib/vdso/Makefile.include
 
 KCOV_INSTRUMENT := n
 
@@ -33,7 +33,7 @@ KBUILD_CFLAGS += -DBUILD_VDSO -DDISABLE_BRANCH_PROFILING
 VDSO_LIBGCC := $(shell $(CROSS32CC) -print-libgcc-file-name)
 
 obj-y += vdso32_wrapper.o
-extra-y += vdso32.lds
+targets += vdso32.lds
 CPPFLAGS_vdso32.lds += -P -C  #  -U$(ARCH)
 
 $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so FORCE
diff --git a/arch/parisc/kernel/vdso64/Makefile b/arch/parisc/kernel/vdso64/Makefile
index bd87bd6a6659..c63f4069170f 100644
--- a/arch/parisc/kernel/vdso64/Makefile
+++ b/arch/parisc/kernel/vdso64/Makefile
@@ -1,5 +1,5 @@
 # Include the generic Makefile to check the built vdso.
-include $(srctree)/lib/vdso/Makefile
+include $(srctree)/lib/vdso/Makefile.include
 
 KCOV_INSTRUMENT := n
 
@@ -32,7 +32,7 @@ KBUILD_CFLAGS += -DBUILD_VDSO -DDISABLE_BRANCH_PROFILING
 VDSO_LIBGCC := $(shell $(CC) -print-libgcc-file-name)
 
 obj-y += vdso64_wrapper.o
-extra-y += vdso64.lds
+targets += vdso64.lds
 CPPFLAGS_vdso64.lds += -P -C -U$(ARCH)
 
 $(obj)/vdso64_wrapper.o : $(obj)/vdso64.so FORCE
diff --git a/arch/parisc/lib/io.c b/arch/parisc/lib/io.c
index 7c00496b47d4..3c7e617f5a93 100644
--- a/arch/parisc/lib/io.c
+++ b/arch/parisc/lib/io.c
@@ -12,114 +12,6 @@
 #include <linux/module.h>
 #include <asm/io.h>
 
-/* Copies a block of memory to a device in an efficient manner.
- * Assumes the device can cope with 32-bit transfers.  If it can't,
- * don't use this function.
- */
-void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
-	if (((unsigned long)dst & 3) != ((unsigned long)src & 3))
-		goto bytecopy;
-	while ((unsigned long)dst & 3) {
-		writeb(*(char *)src, dst++);
-		src++;
-		count--;
-	}
-	while (count > 3) {
-		__raw_writel(*(u32 *)src, dst);
-		src += 4;
-		dst += 4;
-		count -= 4;
-	}
- bytecopy:
-	while (count--) {
-		writeb(*(char *)src, dst++);
-		src++;
-	}
-}
-
-/*
-** Copies a block of memory from a device in an efficient manner.
-** Assumes the device can cope with 32-bit transfers.  If it can't,
-** don't use this function.
-**
-** CR16 counts on C3000 reading 256 bytes from Symbios 896 RAM:
-**	27341/64    = 427 cyc per int
-**	61311/128   = 478 cyc per short
-**	122637/256  = 479 cyc per byte
-** Ergo bus latencies dominant (not transfer size).
-**      Minimize total number of transfers at cost of CPU cycles.
-**	TODO: only look at src alignment and adjust the stores to dest.
-*/
-void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
-	/* first compare alignment of src/dst */ 
-	if ( (((unsigned long)dst ^ (unsigned long)src) & 1) || (count < 2) )
-		goto bytecopy;
-
-	if ( (((unsigned long)dst ^ (unsigned long)src) & 2) || (count < 4) )
-		goto shortcopy;
-
-	/* Then check for misaligned start address */
-	if ((unsigned long)src & 1) {
-		*(u8 *)dst = readb(src);
-		src++;
-		dst++;
-		count--;
-		if (count < 2) goto bytecopy;
-	}
-
-	if ((unsigned long)src & 2) {
-		*(u16 *)dst = __raw_readw(src);
-		src += 2;
-		dst += 2;
-		count -= 2;
-	}
-
-	while (count > 3) {
-		*(u32 *)dst = __raw_readl(src);
-		dst += 4;
-		src += 4;
-		count -= 4;
-	}
-
- shortcopy:
-	while (count > 1) {
-		*(u16 *)dst = __raw_readw(src);
-		src += 2;
-		dst += 2;
-		count -= 2;
-	}
-
- bytecopy:
-	while (count--) {
-		*(char *)dst = readb(src);
-		src++;
-		dst++;
-	}
-}
-
-/* Sets a block of memory on a device to a given value.
- * Assumes the device can cope with 32-bit transfers.  If it can't,
- * don't use this function.
- */
-void memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
-	u32 val32 = (val << 24) | (val << 16) | (val << 8) | val;
-	while ((unsigned long)addr & 3) {
-		writeb(val, addr++);
-		count--;
-	}
-	while (count > 3) {
-		__raw_writel(val32, addr);
-		addr += 4;
-		count -= 4;
-	}
-	while (count--) {
-		writeb(val, addr++);
-	}
-}
-
 /*
  * Read COUNT 8-bit bytes from port PORT into memory starting at
  * SRC.
@@ -170,15 +62,15 @@ void insw (unsigned long port, void *dst, unsigned long count)
 	unsigned char *p;
 
 	p = (unsigned char *)dst;
-	
+
 	if (!count)
 		return;
-	
+
 	switch (((unsigned long)p) & 0x3)
 	{
 	 case 0x00:			/* Buffer 32-bit aligned */
 		while (count>=2) {
-			
+
 			count -= 2;
 			l = cpu_to_le16(inw(port)) << 16;
 			l |= cpu_to_le16(inw(port));
@@ -189,13 +81,13 @@ void insw (unsigned long port, void *dst, unsigned long count)
 			*(unsigned short *)p = cpu_to_le16(inw(port));
 		}
 		break;
-	
+
 	 case 0x02:			/* Buffer 16-bit aligned */
 		*(unsigned short *)p = cpu_to_le16(inw(port));
 		p += 2;
 		count--;
 		while (count>=2) {
-			
+
 			count -= 2;
 			l = cpu_to_le16(inw(port)) << 16;
 			l |= cpu_to_le16(inw(port));
@@ -206,13 +98,13 @@ void insw (unsigned long port, void *dst, unsigned long count)
 			*(unsigned short *)p = cpu_to_le16(inw(port));
 		}
 		break;
-		
+
 	 case 0x01:			/* Buffer 8-bit aligned */
 	 case 0x03:
 		/* I don't bother with 32bit transfers
 		 * in this case, 16bit will have to do -- DE */
 		--count;
-		
+
 		l = cpu_to_le16(inw(port));
 		*p = l >> 8;
 		p++;
@@ -242,10 +134,10 @@ void insl (unsigned long port, void *dst, unsigned long count)
 	unsigned char *p;
 
 	p = (unsigned char *)dst;
-	
+
 	if (!count)
 		return;
-	
+
 	switch (((unsigned long) dst) & 0x3)
 	{
 	 case 0x00:			/* Buffer 32-bit aligned */
@@ -255,14 +147,14 @@ void insl (unsigned long port, void *dst, unsigned long count)
 			p += 4;
 		}
 		break;
-	
+
 	 case 0x02:			/* Buffer 16-bit aligned */
 		--count;
-		
+
 		l = cpu_to_le32(inl(port));
 		*(unsigned short *)p = l >> 16;
 		p += 2;
-		
+
 		while (count--)
 		{
 			l2 = cpu_to_le32(inl(port));
@@ -274,7 +166,7 @@ void insl (unsigned long port, void *dst, unsigned long count)
 		break;
 	 case 0x01:			/* Buffer 8-bit aligned */
 		--count;
-		
+
 		l = cpu_to_le32(inl(port));
 		*(unsigned char *)p = l >> 24;
 		p++;
@@ -291,7 +183,7 @@ void insl (unsigned long port, void *dst, unsigned long count)
 		break;
 	 case 0x03:			/* Buffer 8-bit aligned */
 		--count;
-		
+
 		l = cpu_to_le32(inl(port));
 		*p = l >> 24;
 		p++;
@@ -340,10 +232,10 @@ void outsw (unsigned long port, const void *src, unsigned long count)
 	const unsigned char *p;
 
 	p = (const unsigned char *)src;
-	
+
 	if (!count)
 		return;
-	
+
 	switch (((unsigned long)p) & 0x3)
 	{
 	 case 0x00:			/* Buffer 32-bit aligned */
@@ -358,13 +250,13 @@ void outsw (unsigned long port, const void *src, unsigned long count)
 			outw(le16_to_cpu(*(unsigned short*)p), port);
 		}
 		break;
-	
+
 	 case 0x02:			/* Buffer 16-bit aligned */
-		
+
 		outw(le16_to_cpu(*(unsigned short*)p), port);
 		p += 2;
 		count--;
-		
+
 		while (count>=2) {
 			count -= 2;
 			l = *(unsigned int *)p;
@@ -376,11 +268,11 @@ void outsw (unsigned long port, const void *src, unsigned long count)
 			outw(le16_to_cpu(*(unsigned short *)p), port);
 		}
 		break;
-		
-	 case 0x01:			/* Buffer 8-bit aligned */	
+
+	 case 0x01:			/* Buffer 8-bit aligned */
 		/* I don't bother with 32bit transfers
 		 * in this case, 16bit will have to do -- DE */
-		
+
 		l  = *p << 8;
 		p++;
 		count--;
@@ -395,7 +287,7 @@ void outsw (unsigned long port, const void *src, unsigned long count)
 		l2 = *(unsigned char *)p;
 		outw (le16_to_cpu(l | l2>>8), port);
 		break;
-	
+
 	}
 }
 
@@ -412,10 +304,10 @@ void outsl (unsigned long port, const void *src, unsigned long count)
 	const unsigned char *p;
 
 	p = (const unsigned char *)src;
-	
+
 	if (!count)
 		return;
-	
+
 	switch (((unsigned long)p) & 0x3)
 	{
 	 case 0x00:			/* Buffer 32-bit aligned */
@@ -425,13 +317,13 @@ void outsl (unsigned long port, const void *src, unsigned long count)
 			p += 4;
 		}
 		break;
-	
+
 	 case 0x02:			/* Buffer 16-bit aligned */
 		--count;
-		
+
 		l = *(unsigned short *)p;
 		p += 2;
-		
+
 		while (count--)
 		{
 			l2 = *(unsigned int *)p;
@@ -462,7 +354,7 @@ void outsl (unsigned long port, const void *src, unsigned long count)
 		break;
 	 case 0x03:			/* Buffer 8-bit aligned */
 		--count;
-		
+
 		l = *p << 24;
 		p++;
 
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index 5fc0c852c84c..03165c82dfdb 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/compiler.h>
 #include <linux/uaccess.h>
+#include <linux/mm.h>
 
 #define get_user_space()	mfsp(SR_USER)
 #define get_kernel_space()	SR_KERNEL
@@ -32,9 +33,24 @@ EXPORT_SYMBOL(raw_copy_to_user);
 unsigned long raw_copy_from_user(void *dst, const void __user *src,
 			       unsigned long len)
 {
+	unsigned long start = (unsigned long) src;
+	unsigned long end = start + len;
+	unsigned long newlen = len;
+
 	mtsp(get_user_space(), SR_TEMP1);
 	mtsp(get_kernel_space(), SR_TEMP2);
-	return pa_memcpy(dst, (void __force *)src, len);
+
+	/* Check region is user accessible */
+	while (start < end) {
+		if (!prober_user(SR_TEMP1, start)) {
+			newlen = (start - (unsigned long) src);
+			break;
+		}
+		start += PAGE_SIZE;
+		/* align to page boundry which may have different permission */
+		start = PAGE_ALIGN_DOWN(start);
+	}
+	return len - newlen + pa_memcpy(dst, (void __force *)src, newlen);
 }
 EXPORT_SYMBOL(raw_copy_from_user);
 
diff --git a/arch/parisc/math-emu/driver.c b/arch/parisc/math-emu/driver.c
index 34495446e051..71829cb7bc81 100644
--- a/arch/parisc/math-emu/driver.c
+++ b/arch/parisc/math-emu/driver.c
@@ -97,9 +97,19 @@ handle_fpe(struct pt_regs *regs)
 
 	memcpy(regs->fr, frcopy, sizeof regs->fr);
 	if (signalcode != 0) {
-	    force_sig_fault(signalcode >> 24, signalcode & 0xffffff,
-			    (void __user *) regs->iaoq[0]);
-	    return -1;
+		int sig = signalcode >> 24;
+
+		if (sig == SIGFPE) {
+			/*
+			 * Clear floating point trap bit to avoid trapping
+			 * again on the first floating-point instruction in
+			 * the userspace signal handler.
+			 */
+			regs->fr[0] &= ~(1ULL << 38);
+		}
+		force_sig_fault(sig, signalcode & 0xffffff,
+				(void __user *) regs->iaoq[0]);
+		return -1;
 	}
 
 	return signalcode ? -1 : 0;
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index c39de84e98b0..f1785640b049 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -363,6 +363,10 @@ bad_area:
 	mmap_read_unlock(mm);
 
 bad_area_nosemaphore:
+	if (!user_mode(regs) && fixup_exception(regs)) {
+		return;
+	}
+
 	if (user_mode(regs)) {
 		int signo, si_code;
 
diff --git a/arch/parisc/mm/hugetlbpage.c b/arch/parisc/mm/hugetlbpage.c
index e9d18cf25b79..a94fe546d434 100644
--- a/arch/parisc/mm/hugetlbpage.c
+++ b/arch/parisc/mm/hugetlbpage.c
@@ -126,7 +126,7 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 
 
 pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep)
+			      pte_t *ptep, unsigned long sz)
 {
 	pte_t entry;
 
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 96970fa75e4a..14270715d754 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -377,10 +377,8 @@ static void __ref map_pages(unsigned long start_vaddr,
 
 #if CONFIG_PGTABLE_LEVELS == 3
 		if (pud_none(*pud)) {
-			pmd = memblock_alloc(PAGE_SIZE << PMD_TABLE_ORDER,
+			pmd = memblock_alloc_or_panic(PAGE_SIZE << PMD_TABLE_ORDER,
 					     PAGE_SIZE << PMD_TABLE_ORDER);
-			if (!pmd)
-				panic("pmd allocation failed.\n");
 			pud_populate(NULL, pud, pmd);
 		}
 #endif
@@ -388,9 +386,7 @@ static void __ref map_pages(unsigned long start_vaddr,
 		pmd = pmd_offset(pud, vaddr);
 		for (tmp1 = start_pmd; tmp1 < PTRS_PER_PMD; tmp1++, pmd++) {
 			if (pmd_none(*pmd)) {
-				pg_table = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-				if (!pg_table)
-					panic("page table allocation failed\n");
+				pg_table = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 				pmd_populate_kernel(NULL, pmd, pg_table);
 			}
 
@@ -566,10 +562,6 @@ void __init mem_init(void)
 	BUILD_BUG_ON(TMPALIAS_MAP_START >= 0x80000000);
 #endif
 
-	high_memory = __va((max_pfn << PAGE_SHIFT));
-	set_max_mapnr(max_low_pfn);
-	memblock_free_all();
-
 #ifdef CONFIG_PA11
 	if (boot_cpu_data.cpu_type == pcxl2 || boot_cpu_data.cpu_type == pcxl) {
 		pcxl_dma_start = (unsigned long)SET_MAP_OFFSET(MAP_START);
@@ -648,9 +640,7 @@ static void __init pagetable_init(void)
 	}
 #endif
 
-	empty_zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!empty_zero_page)
-		panic("zero page allocation failed.\n");
+	empty_zero_page = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 
 }
 
@@ -687,19 +677,15 @@ static void __init fixmap_init(void)
 
 #if CONFIG_PGTABLE_LEVELS == 3
 	if (pud_none(*pud)) {
-		pmd = memblock_alloc(PAGE_SIZE << PMD_TABLE_ORDER,
+		pmd = memblock_alloc_or_panic(PAGE_SIZE << PMD_TABLE_ORDER,
 				     PAGE_SIZE << PMD_TABLE_ORDER);
-		if (!pmd)
-			panic("fixmap: pmd allocation failed.\n");
 		pud_populate(NULL, pud, pmd);
 	}
 #endif
 
 	pmd = pmd_offset(pud, addr);
 	do {
-		pte_t *pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-		if (!pte)
-			panic("fixmap: pte allocation failed.\n");
+		pte_t *pte = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
 
 		pmd_populate_kernel(&init_mm, pmd, pte);
 
diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c
index fd996472dfe7..0b65c4b3baee 100644
--- a/arch/parisc/mm/ioremap.c
+++ b/arch/parisc/mm/ioremap.c
@@ -14,7 +14,7 @@
 #include <linux/mm.h>
 
 void __iomem *ioremap_prot(phys_addr_t phys_addr, size_t size,
-			   unsigned long prot)
+			   pgprot_t prot)
 {
 #ifdef CONFIG_EISA
 	unsigned long end = phys_addr + size - 1;
@@ -41,6 +41,6 @@ void __iomem *ioremap_prot(phys_addr_t phys_addr, size_t size,
 		}
 	}
 
-	return generic_ioremap_prot(phys_addr, size, __pgprot(prot));
+	return generic_ioremap_prot(phys_addr, size, prot);
 }
 EXPORT_SYMBOL(ioremap_prot);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a0ce777f9706..9537a61ebae0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -122,6 +122,7 @@ config PPC
 	# Please keep this list sorted alphabetically.
 	#
 	select ARCH_32BIT_OFF_T if PPC32
+	select ARCH_NEEDS_DEFER_KASAN		if PPC_RADIX_MMU
 	select ARCH_DISABLE_KASAN_INLINE	if PPC_RADIX_MMU
 	select ARCH_DMA_DEFAULT_COHERENT	if !NOT_COHERENT_CACHE
 	select ARCH_ENABLE_MEMORY_HOTPLUG
@@ -136,6 +137,7 @@ config PPC
 	select ARCH_HAS_DMA_OPS			if PPC64
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_GIGANTIC_PAGE		if ARCH_SUPPORTS_HUGETLBFS
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_KERNEL_FPU_SUPPORT	if PPC64 && PPC_FPU
 	select ARCH_HAS_MEMBARRIER_CALLBACKS
@@ -145,7 +147,8 @@ config PPC
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_PMEM_API
-	select ARCH_HAS_PTE_DEVMAP		if PPC_BOOK3S_64
+	select ARCH_HAS_PREEMPT_LAZY
+	select ARCH_HAS_PTDUMP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SCALED_CPUTIME		if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64
 	select ARCH_HAS_SET_MEMORY
@@ -156,6 +159,7 @@ config PPC
 	select ARCH_HAS_TICK_BROADCAST		if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_UACCESS_FLUSHCACHE
 	select ARCH_HAS_UBSAN
+	select ARCH_HAS_VDSO_ARCH_DATA
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_HAVE_EXTRA_ELF_NOTES        if SPU_BASE
 	select ARCH_KEEP_MEMBLOCK
@@ -168,6 +172,9 @@ config PPC
 	select ARCH_STACKWALK
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_DEBUG_PAGEALLOC	if PPC_BOOK3S || PPC_8xx
+	select ARCH_SUPPORTS_SCHED_MC		if SMP
+	select ARCH_SUPPORTS_SCHED_SMT		if PPC64 && SMP
+	select SCHED_MC				if ARCH_SUPPORTS_SCHED_MC
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF		if PPC64
 	select ARCH_USE_MEMTEST
@@ -203,10 +210,8 @@ config PPC
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 	select GENERIC_PCI_IOMAP		if PCI
-	select GENERIC_PTDUMP
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
-	select GENERIC_VDSO_TIME_NS
 	select HAS_IOPORT			if PCI
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HUGE_VMALLOC		if HAVE_ARCH_HUGE_VMAP
@@ -240,13 +245,15 @@ config PPC
 	select HAVE_EBPF_JIT
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_GUP_FAST
-	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FTRACE_GRAPH_FUNC
+	select HAVE_FTRACE_REGS_HAVING_PT_REGS
 	select HAVE_FUNCTION_ARG_ACCESS_API
 	select HAVE_FUNCTION_DESCRIPTORS	if PPC64_ELF_ABI_V1
 	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER		if !COMPILE_TEST && (PPC64 || (PPC32 && CC_IS_GCC))
-	select HAVE_GCC_PLUGINS			if GCC_VERSION >= 50200   # plugin support on gcc <= 5.1 is buggy on PPC
+	select HAVE_GCC_PLUGINS
 	select HAVE_GENERIC_VDSO
 	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if PPC_BOOK3S_64 && SMP
 	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
@@ -271,6 +278,7 @@ config PPC
 	select HAVE_PERF_EVENTS_NMI		if PPC64
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
+	select HAVE_PREEMPT_DYNAMIC_KEY
 	select HAVE_RETHOOK			if KPROBES
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RELIABLE_STACKTRACE
@@ -282,6 +290,7 @@ config PPC
 	select HAVE_STACKPROTECTOR		if PPC32 && $(cc-option,$(m32-flag) -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=0)
 	select HAVE_STACKPROTECTOR		if PPC64 && $(cc-option,$(m64-flag) -mstack-protector-guard=tls -mstack-protector-guard-reg=r13 -mstack-protector-guard-offset=0)
 	select HAVE_STATIC_CALL			if PPC32
+	select HAVE_STATIC_CALL_INLINE		if PPC32
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_VIRT_CPU_ACCOUNTING
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
@@ -407,12 +416,9 @@ config ARCH_HAS_ADD_PAGES
 config PPC_DCR_NATIVE
 	bool
 
-config PPC_DCR_MMIO
-	bool
-
 config PPC_DCR
 	bool
-	depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
+	depends on PPC_DCR_NATIVE
 	default y
 
 config PPC_PCI_OF_BUS_MAP
@@ -438,11 +444,6 @@ config PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
 	  PCI domain dependent and each PCI controller on own domain can have
 	  256 PCI buses, like it is on other Linux architectures.
 
-config PPC_OF_PLATFORM_PCI
-	bool
-	depends on PCI
-	depends on PPC64 # not supported on 32 bits yet
-
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
@@ -717,6 +718,9 @@ config ARCH_SUPPORTS_CRASH_HOTPLUG
 	def_bool y
 	depends on PPC64
 
+config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
+	def_bool CRASH_RESERVE
+
 config FA_DUMP
 	bool "Firmware-assisted dump"
 	depends on CRASH_DUMP && PPC64 && (PPC_RTAS || PPC_POWERNV)
@@ -892,7 +896,7 @@ config DATA_SHIFT
 	int "Data shift" if DATA_SHIFT_BOOL
 	default 24 if STRICT_KERNEL_RWX && PPC64
 	range 17 28 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_BOOK3S_32
-	range 19 23 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_8xx
+	range 14 23 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_8xx
 	range 20 24 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_85xx
 	default 22 if STRICT_KERNEL_RWX && PPC_BOOK3S_32
 	default 18 if (DEBUG_PAGEALLOC || KFENCE) && PPC_BOOK3S_32
@@ -905,10 +909,10 @@ config DATA_SHIFT
 	  On Book3S 32 (603+), DBATs are used to map kernel text and rodata RO.
 	  Smaller is the alignment, greater is the number of necessary DBATs.
 
-	  On 8xx, large pages (512kb or 8M) are used to map kernel linear
-	  memory. Aligning to 8M reduces TLB misses as only 8M pages are used
-	  in that case. If PIN_TLB is selected, it must be aligned to 8M as
-	  8M pages will be pinned.
+	  On 8xx, large pages (16kb or 512kb or 8M) are used to map kernel
+	  linear memory. Aligning to 8M reduces TLB misses as only 8M pages
+	  are used in that case. If PIN_TLB is selected, it must be aligned
+	  to 8M as 8M pages will be pinned.
 
 config ARCH_FORCE_MAX_ORDER
 	int "Order of maximal physically contiguous allocations"
@@ -964,14 +968,6 @@ config PPC_PROT_SAO_LPAR
 config PPC_COPRO_BASE
 	bool
 
-config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on PPC64 && SMP
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with POWER5 cpus at a cost of slightly increased
-	  overhead in some places. If unsure say N here.
-
 config PPC_DENORMALISATION
 	bool "PowerPC denormalisation exception handling"
 	depends on PPC_BOOK3S_64
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 20d05605fa83..f15e5920080b 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -216,13 +216,6 @@ config PPC_EARLY_DEBUG_RTAS_PANEL
 	help
 	  Select this to enable early debugging via the RTAS panel.
 
-config PPC_EARLY_DEBUG_RTAS_CONSOLE
-	bool "RTAS Console"
-	depends on PPC_RTAS
-	select UDBG_RTAS_CONSOLE
-	help
-	  Select this to enable early debugging via the RTAS console.
-
 config PPC_EARLY_DEBUG_PAS_REALMODE
 	bool "PA Semi real mode"
 	depends on PPC_PASEMI
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index f3804103c56c..a58b1029592c 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_PPC64)$(CONFIG_LD_IS_BFD),yy)
 # There is a corresponding test in arch/powerpc/lib/Makefile
 KBUILD_LDFLAGS_MODULE += --save-restore-funcs
 else
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+KBUILD_LDFLAGS_MODULE += $(objtree)/arch/powerpc/lib/crtsavres.o
 endif
 
 ifdef CONFIG_CPU_LITTLE_ENDIAN
@@ -101,7 +101,7 @@ KBUILD_LDFLAGS	+= -m elf$(BITS)$(LDEMULATION)
 endif
 
 LDFLAGS_vmlinux-y := -Bstatic
-LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie
+LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie --no-dynamic-linker
 LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) += -z notext
 LDFLAGS_vmlinux	:= $(LDFLAGS_vmlinux-y)
 
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 1ff6ad4f6cd2..f1a4761ebd44 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -70,6 +70,7 @@ BOOTCPPFLAGS	:= -nostdinc $(LINUXINCLUDE)
 BOOTCPPFLAGS	+= -isystem $(shell $(BOOTCC) -print-file-name=include)
 
 BOOTCFLAGS	:= $(BOOTTARGETFLAGS) \
+		   -std=gnu11 -fms-extensions \
 		   -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -O2 \
 		   -msoft-float -mno-altivec -mno-vsx \
@@ -85,6 +86,7 @@ BOOTARFLAGS	:= -crD
 
 ifdef CONFIG_CC_IS_CLANG
 BOOTCFLAGS += $(CLANG_FLAGS)
+BOOTCFLAGS += -Wno-microsoft-anon-tag
 BOOTAFLAGS += $(CLANG_FLAGS)
 endif
 
@@ -173,7 +175,6 @@ src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
 src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
 src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
 src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
-src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
 src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
 
 src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
@@ -243,13 +244,13 @@ $(obj)/wrapper.a: $(obj-wlib) FORCE
 hostprogs	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) zImage.lds
-extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
+always-y	:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
 		   $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
 
 dtstree		:= $(src)/dts
 
 wrapper		:= $(src)/wrapper
-wrapperbits	:= $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
+wrapperbits	:= $(always-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
 			$(wrapper) FORCE
 
 #############
@@ -276,7 +277,6 @@ quiet_cmd_wrap	= WRAP    $@
 
 image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
 image-$(CONFIG_PPC_POWERNV)		+= zImage.pseries
-image-$(CONFIG_PPC_IBM_CELL_BLADE)	+= zImage.pseries
 image-$(CONFIG_PPC_PS3)			+= dtbImage.ps3
 image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
 image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
@@ -457,7 +457,7 @@ WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
 WRAPPER_BINDIR := /usr/sbin
 INSTALL := install
 
-extra-installed		:= $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
+extra-installed		:= $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(always-y))
 hostprogs-installed	:= $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs))
 wrapper-installed	:= $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
 dts-installed		:= $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index 53b3b2621457..78704927453a 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -68,8 +68,8 @@ static int e_class = ELFCLASS32;
 #define PUT_16BE(off, v)(buf[off] = ((v) >> 8) & 0xff, \
 			 buf[(off) + 1] = (v) & 0xff)
 #define PUT_32BE(off, v)(PUT_16BE((off), (v) >> 16L), PUT_16BE((off) + 2, (v)))
-#define PUT_64BE(off, v)((PUT_32BE((off), (v) >> 32L), \
-			  PUT_32BE((off) + 4, (v))))
+#define PUT_64BE(off, v)((PUT_32BE((off), (unsigned long long)(v) >> 32L), \
+			  PUT_32BE((off) + 4, (unsigned long long)(v))))
 
 #define GET_16LE(off)	((buf[off]) + (buf[(off)+1] << 8))
 #define GET_32LE(off)	(GET_16LE(off) + (GET_16LE((off)+2U) << 16U))
@@ -78,7 +78,8 @@ static int e_class = ELFCLASS32;
 #define PUT_16LE(off, v) (buf[off] = (v) & 0xff, \
 			  buf[(off) + 1] = ((v) >> 8) & 0xff)
 #define PUT_32LE(off, v) (PUT_16LE((off), (v)), PUT_16LE((off) + 2, (v) >> 16L))
-#define PUT_64LE(off, v) (PUT_32LE((off), (v)), PUT_32LE((off) + 4, (v) >> 32L))
+#define PUT_64LE(off, v) (PUT_32LE((off), (unsigned long long)(v)), \
+			  PUT_32LE((off) + 4, (unsigned long long)(v) >> 32L))
 
 #define GET_16(off)	(e_data == ELFDATA2MSB ? GET_16BE(off) : GET_16LE(off))
 #define GET_32(off)	(e_data == ELFDATA2MSB ? GET_32BE(off) : GET_32LE(off))
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 52a84561c4f0..33ddb17d1876 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -72,7 +72,7 @@
 		reg = <0xff000000 0x00000200>;
 		bus-frequency = <0>;
 
-		wdt@200 {
+		watchdog@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
diff --git a/arch/powerpc/boot/dts/fsl/ge_imp3a.dts b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts
index da3de8e2b7d2..9e5c01cfac2f 100644
--- a/arch/powerpc/boot/dts/fsl/ge_imp3a.dts
+++ b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts
@@ -94,7 +94,7 @@
 			gpio-controller;
 		};
 
-		wdt@4,800 {
+		watchdog@4,800 {
 			compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
 				"gef,fpga-wdt";
 			reg = <0x4 0x800 0x8>;
@@ -103,7 +103,7 @@
 		};
 
 		/* Second watchdog available, driver currently supports one.
-		wdt@4,808 {
+		watchdog@4,808 {
 			compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
 				"gef,fpga-wdt";
 			reg = <0x4 0x808 0x8>;
diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
index fc92bb032c51..48a81430a8a3 100644
--- a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
@@ -82,7 +82,7 @@
 			reg = <0x4 0x0 0x40>;
 		};
 
-		wdt@4,2000 {
+		watchdog@4,2000 {
 			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
 				"gef,fpga-wdt";
 			reg = <0x4 0x2000 0x8>;
@@ -90,7 +90,7 @@
 			interrupt-parent = <&gef_pic>;
 		};
 		/* Second watchdog available, driver currently supports one.
-		wdt@4,2010 {
+		watchdog@4,2010 {
 			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
 				"gef,fpga-wdt";
 			reg = <0x4 0x2010 0x8>;
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
index 47ae85c34635..8eb254b1738d 100644
--- a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
@@ -79,7 +79,7 @@
 			reg = <0x4 0x0 0x40>;
 		};
 
-		wdt@4,2000 {
+		watchdog@4,2000 {
 			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
 				"gef,fpga-wdt";
 			reg = <0x4 0x2000 0x8>;
@@ -87,7 +87,7 @@
 			interrupt-parent = <&gef_pic>;
 		};
 /*
-		wdt@4,2010 {
+		watchdog@4,2010 {
 			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
 				"gef,fpga-wdt";
 			reg = <0x4 0x2010 0x8>;
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
index 5322be44b62e..02edbb262b8f 100644
--- a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
@@ -82,14 +82,14 @@
 			reg = <0x4 0x0 0x40>;
 		};
 
-		wdt@4,2000 {
+		watchdog@4,2000 {
 			compatible = "gef,fpga-wdt";
 			reg = <0x4 0x2000 0x8>;
 			interrupts = <0x1a 0x4>;
 			interrupt-parent = <&gef_pic>;
 		};
 		/* Second watchdog available, driver currently supports one.
-		wdt@4,2010 {
+		watchdog@4,2010 {
 			compatible = "gef,fpga-wdt";
 			reg = <0x4 0x2010 0x8>;
 			interrupts = <0x1b 0x4>;
diff --git a/arch/powerpc/boot/dts/microwatt.dts b/arch/powerpc/boot/dts/microwatt.dts
index 269e930b3b0b..292b909ca9ce 100644
--- a/arch/powerpc/boot/dts/microwatt.dts
+++ b/arch/powerpc/boot/dts/microwatt.dts
@@ -1,13 +1,15 @@
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	#size-cells = <0x02>;
 	#address-cells = <0x02>;
-	model-name = "microwatt";
+	model = "microwatt";
 	compatible = "microwatt-soc";
 
 	aliases {
 		serial0 = &UART0;
+		ethernet = &enet0;
 	};
 
 	reserved-memory {
@@ -35,40 +37,79 @@
 
 		ibm,powerpc-cpu-features {
 			display-name = "Microwatt";
-			isa = <3000>;
+			isa = <3100>;
 			device_type = "cpu-features";
 			compatible = "ibm,powerpc-cpu-features";
 
 			mmu-radix {
 				isa = <3000>;
-				usable-privilege = <2>;
+				usable-privilege = <6>;
+				os-support = <0>;
 			};
 
 			little-endian {
-				isa = <2050>;
-				usable-privilege = <3>;
+				isa = <0>;
+				usable-privilege = <7>;
+				os-support = <0>;
 				hwcap-bit-nr = <1>;
 			};
 
 			cache-inhibited-large-page {
-				isa = <2040>;
-				usable-privilege = <2>;
+				isa = <0>;
+				usable-privilege = <6>;
+				os-support = <0>;
 			};
 
 			fixed-point-v3 {
 				isa = <3000>;
-				usable-privilege = <3>;
+				usable-privilege = <7>;
 			};
 
 			no-execute {
-				isa = <2010>;
+				isa = <0x00>;
 				usable-privilege = <2>;
+				os-support = <0>;
 			};
 
 			floating-point {
+				hfscr-bit-nr = <0>;
 				hwcap-bit-nr = <27>;
 				isa = <0>;
-				usable-privilege = <3>;
+				usable-privilege = <7>;
+				hv-support = <1>;
+				os-support = <0>;
+			};
+
+			prefixed-instructions {
+				hfscr-bit-nr = <13>;
+				fscr-bit-nr = <13>;
+				isa = <3010>;
+				usable-privilege = <7>;
+				os-support = <1>;
+				hv-support = <1>;
+			};
+
+			tar {
+				hfscr-bit-nr = <8>;
+				fscr-bit-nr = <8>;
+				isa = <2070>;
+				usable-privilege = <7>;
+				os-support = <1>;
+				hv-support = <1>;
+				hwcap-bit-nr = <58>;
+			};
+
+			control-register {
+				isa = <0>;
+				usable-privilege = <7>;
+			};
+
+			system-call-vectored {
+				isa = <3000>;
+				usable-privilege = <7>;
+				os-support = <1>;
+				fscr-bit-nr = <12>;
+				hwcap-bit-nr = <52>;
 			};
 		};
 
@@ -101,6 +142,36 @@
 			ibm,mmu-lpid-bits = <12>;
 			ibm,mmu-pid-bits = <20>;
 		};
+
+		PowerPC,Microwatt@1 {
+			i-cache-sets = <2>;
+			ibm,dec-bits = <64>;
+			reservation-granule-size = <64>;
+			clock-frequency = <100000000>;
+			timebase-frequency = <100000000>;
+			i-tlb-sets = <1>;
+			ibm,ppc-interrupt-server#s = <1>;
+			i-cache-block-size = <64>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <2>;
+			i-tlb-size = <64>;
+			cpu-version = <0x990000>;
+			status = "okay";
+			i-cache-size = <0x1000>;
+			ibm,processor-radix-AP-encodings = <0x0c 0xa0000010 0x20000015 0x4000001e>;
+			tlb-size = <0>;
+			tlb-sets = <0>;
+			device_type = "cpu";
+			d-tlb-size = <128>;
+			d-tlb-sets = <2>;
+			reg = <1>;
+			general-purpose;
+			64-bit;
+			d-cache-size = <0x1000>;
+			ibm,chip-id = <0>;
+			ibm,mmu-lpid-bits = <12>;
+			ibm,mmu-pid-bits = <20>;
+		};
 	};
 
 	soc@c0000000 {
@@ -113,8 +184,8 @@
 
 		interrupt-controller@4000 {
 			compatible = "openpower,xics-presentation", "ibm,ppc-xicp";
-			ibm,interrupt-server-ranges = <0x0 0x1>;
-			reg = <0x4000 0x100>;
+			ibm,interrupt-server-ranges = <0x0 0x2>;
+			reg = <0x4000 0x10 0x4010 0x10>;
 		};
 
 		ICS: interrupt-controller@5000 {
@@ -138,7 +209,18 @@
 			interrupts = <0x10 0x1>;
 		};
 
-		ethernet@8020000 {
+		gpio: gpio@7000 {
+			device_type = "gpio";
+			compatible = "faraday,ftgpio010";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x7000 0x80>;
+			interrupts = <0x14 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		enet0: ethernet@8020000 {
 			compatible = "litex,liteeth";
 			reg = <0x8021000 0x100
 				0x8020800 0x100
@@ -160,7 +242,6 @@
 			reg-names = "phy", "core", "reader", "writer", "irq";
 			bus-width = <4>;
 			interrupts = <0x13 1>;
-			cap-sd-highspeed;
 			clocks = <&sys_clk>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
index d3fc8062fbcd..a278fb7b9e71 100644
--- a/arch/powerpc/boot/dts/mpc5121.dtsi
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -112,7 +112,7 @@
 		};
 
 		/* Watchdog timer */
-		wdt@900 {
+		watchdog@900 {
 			compatible = "fsl,mpc5121-wdt";
 			reg = <0x900 0x100>;
 		};
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index a8315795b2c9..09508b4c8c73 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -99,7 +99,7 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
 
-		wdt@200 {
+		watchdog@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index e09b37d7489d..a8f68d6e50b0 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -6,6 +6,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "fsl,mpc8315erdb";
@@ -99,7 +100,7 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
 
-		wdt@200 {
+		watchdog@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
@@ -358,6 +359,15 @@
 			interrupt-parent = <&ipic>;
 			fsl,mpc8313-wakeup-timer = <&gtm1>;
 		};
+
+		gpio: gpio-controller@c00 {
+			compatible = "fsl,mpc8314-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
 	};
 
 	pci0: pci@e0008500 {
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index ecebc27a2898..ba7caaf98fd5 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -52,7 +52,7 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
 
-		wdt@200 {
+		watchdog@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index d4ebbb93de0b..13f17232ba83 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -53,7 +53,7 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
 
-		wdt@200 {
+		watchdog@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index bcf68a0a7b55..eae0afd5abbc 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -51,7 +51,7 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
 
-		wdt@200 {
+		watchdog@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index a0cc1953484d..4ff38e1a2185 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -62,7 +62,7 @@
 		/* filled by u-boot */
 		bus-frequency = <0>;
 
-		wdt@200 {
+		watchdog@200 {
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
 		};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 7df452efa957..f137ccb8cfde 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -99,7 +99,7 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
 
-		wdt@200 {
+		watchdog@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
index d8e7d40aeae4..ce254dd74dd0 100644
--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -89,7 +89,7 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
 
-		wdt@200 {
+		watchdog@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index bdcfe83a561e..19e5473d4161 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -99,7 +99,7 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
 
-		wdt@200 {
+		watchdog@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index a5f702304a35..61519acca228 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -97,7 +97,7 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
 
-		wdt@200 {
+		watchdog@200 {
 			device_type = "watchdog";
 			compatible = "mpc83xx_wdt";
 			reg = <0x200 0x100>;
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
index 101fcb397a0f..c3df6c27ce75 100755
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -19,19 +19,19 @@
 set -e
 
 # this should work for both the pSeries zImage and the iSeries vmlinux.sm
-image_name=`basename $2`
+image_name=$(basename "$2")
 
 
 echo "Warning: '${INSTALLKERNEL}' command not available... Copying" \
      "directly to $4/$image_name-$1" >&2
 
-if [ -f $4/$image_name-$1 ]; then
-	mv $4/$image_name-$1 $4/$image_name-$1.old
+if [ -f "$4"/"$image_name"-"$1" ]; then
+	mv "$4"/"$image_name"-"$1" "$4"/"$image_name"-"$1".old
 fi
 
-if [ -f $4/System.map-$1 ]; then
-	mv $4/System.map-$1 $4/System-$1.old
+if [ -f "$4"/System.map-"$1" ]; then
+	mv "$4"/System.map-"$1" "$4"/System-"$1".old
 fi
 
-cat $2 > $4/$image_name-$1
-cp $3 $4/System.map-$1
+cat "$2" > "$4"/"$image_name"-"$1"
+cp "$3" "$4"/System.map-"$1"
diff --git a/arch/powerpc/boot/page.h b/arch/powerpc/boot/page.h
index c3d55fc8f34c..e44a3119720d 100644
--- a/arch/powerpc/boot/page.h
+++ b/arch/powerpc/boot/page.h
@@ -5,7 +5,7 @@
  * Copyright (C) 2001 PPC64 Team, IBM Corp
  */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define ASM_CONST(x) x
 #else
 #define __ASM_CONST(x) x##UL
diff --git a/arch/powerpc/boot/rs6000.h b/arch/powerpc/boot/rs6000.h
index a9d879155ef9..16df8f3c43f1 100644
--- a/arch/powerpc/boot/rs6000.h
+++ b/arch/powerpc/boot/rs6000.h
@@ -1,11 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /* IBM RS/6000 "XCOFF" file definitions for BFD.
    Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-   FIXME: Can someone provide a transliteration of this name into ASCII?
-   Using the following chars caused a compiler warning on HIUX (so I replaced
-   them with octal escapes), and isn't useful without an understanding of what
-   character set it is.
-   Written by Mimi Ph\373\364ng-Th\345o V\365 of IBM
+   Written by Mimi Phuong-Thao Vo of IBM
    and John Gilmore of Cygnus Support.  */
 
 /********************** FILE HEADER **********************/
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 1db60fe13802..1efd1206fcab 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -21,7 +21,7 @@
 #		(default ./arch/powerpc/boot)
 # -W dir	specify working directory for temporary files (default .)
 # -z		use gzip (legacy)
-# -Z zsuffix    compression to use (gz, xz or none)
+# -Z zsuffix    compression to use (gz, xz, lzma, lzo or none)
 
 # Stop execution if any command fails
 set -e
@@ -69,7 +69,7 @@ usage() {
     echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2
     echo '       [-d devtree] [-s tree.dts] [-e esm_blob]' >&2
     echo '       [-c] [-C cross-prefix] [-D datadir] [-W workingdir]' >&2
-    echo '       [-Z (gz|xz|none)] [--no-compression] [vmlinux]' >&2
+    echo '       [-Z (gz|xz|lzma|lzo|none)] [--no-compression] [vmlinux]' >&2
     exit 1
 }
 
@@ -226,18 +226,12 @@ ld_is_lld()
 
 # Do not include PT_INTERP segment when linking pie. Non-pie linking
 # just ignores this option.
-LD_VERSION=$(${CROSS}ld --version | ld_version)
-LD_NO_DL_MIN_VERSION=$(echo 2.26 | ld_version)
-if [ "$LD_VERSION" -ge "$LD_NO_DL_MIN_VERSION" ] ; then
-	nodl="--no-dynamic-linker"
-fi
+nodl="--no-dynamic-linker"
 
 # suppress some warnings in recent ld versions
 nowarn="-z noexecstack"
-if ! ld_is_lld; then
-	if [ "$LD_VERSION" -ge "$(echo 2.39 | ld_version)" ]; then
-		nowarn="$nowarn --no-warn-rwx-segments"
-	fi
+if "${CROSS}ld" -v --no-warn-rwx-segments >/dev/null 2>&1; then
+	nowarn="$nowarn --no-warn-rwx-segments"
 fi
 
 platformo=$object/"$platform".o
diff --git a/arch/powerpc/configs/44x/akebono_defconfig b/arch/powerpc/configs/44x/akebono_defconfig
index fde4824f235e..02e88648a2e6 100644
--- a/arch/powerpc/configs/44x/akebono_defconfig
+++ b/arch/powerpc/configs/44x/akebono_defconfig
@@ -85,7 +85,6 @@ CONFIG_IBM_EMAC=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -128,6 +127,5 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x00010000
 CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x33f
 CONFIG_CRYPTO_PCBC=y
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1_PPC=y
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 2479ab62d12f..98221bda380d 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -91,5 +91,4 @@ CONFIG_AFFS_FS=m
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 20891c413149..5757625469c4 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -85,8 +85,6 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_UTF8=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 1715ff547442..b99caba8724a 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -73,6 +73,5 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_932=y
 CONFIG_NLS_ISO8859_8=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index e65c0057147f..11163052fdba 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -80,5 +80,4 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC_T10DIF=y
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 17714bf0ed40..312d39e4242c 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -72,5 +72,4 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC_T10DIF=y
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 58fae5131fa7..ac27f99faab8 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -75,6 +75,5 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC_T10DIF=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
index da6fc203e2dc..7beb36a41d45 100644
--- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig
+++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig
@@ -221,9 +221,6 @@ CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_MD5=y
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index e7080497048d..0a42072fa23c 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -60,8 +60,6 @@ CONFIG_CRAMFS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=m
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_BDI_SWITCH=y
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 3a6381aa9fdc..488d03ae6d6c 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -132,7 +132,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_CRYPTO_HMAC=y
diff --git a/arch/powerpc/configs/86xx-hw.config b/arch/powerpc/configs/86xx-hw.config
index 0cb24b33c88e..e7bd265fae5a 100644
--- a/arch/powerpc/configs/86xx-hw.config
+++ b/arch/powerpc/configs/86xx-hw.config
@@ -5,7 +5,6 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_CARDBUS is not set
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_ST=y
-CONFIG_CRC_T10DIF=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_DS1682=y
 CONFIG_EEPROM_LEGACY=y
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 97f4d4851735..3c6445c98a85 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -44,7 +44,6 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC32_SLICEBY4=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig
index 200bb1ecb560..69ef3dc31c4b 100644
--- a/arch/powerpc/configs/amigaone_defconfig
+++ b/arch/powerpc/configs/amigaone_defconfig
@@ -106,7 +106,6 @@ CONFIG_TMPFS=y
 CONFIG_AFFS_FS=m
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-CONFIG_CRC_T10DIF=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index 53f43a34e1a9..7a31b52e92e1 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -25,7 +25,6 @@ CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=m
 CONFIG_PS3_FLASH=m
 CONFIG_PS3_LPM=m
-CONFIG_PPC_IBM_CELL_BLADE=y
 CONFIG_RTAS_FLASH=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
@@ -63,7 +62,6 @@ CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -133,7 +131,6 @@ CONFIG_SKGE=m
 CONFIG_SKY2=m
 CONFIG_GELIC_NET=m
 CONFIG_GELIC_WIRELESS=y
-CONFIG_SPIDER_NET=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO_I8042 is not set
@@ -168,7 +165,6 @@ CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 CONFIG_EDAC=y
-CONFIG_EDAC_CELL=y
 CONFIG_UIO=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT4_FS=y
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index fb314f75ad4b..b799c95480ae 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -110,7 +110,6 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-CONFIG_CRC_T10DIF=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 50cc59eb36cf..354180ab94bc 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -47,7 +47,6 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
-CONFIG_CRC32_SLICEBY4=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DETECT_HUNG_TASK=y
diff --git a/arch/powerpc/configs/fsl-emb-nonhw.config b/arch/powerpc/configs/fsl-emb-nonhw.config
index 3009b0efaf34..2f81bc2d819e 100644
--- a/arch/powerpc/configs/fsl-emb-nonhw.config
+++ b/arch/powerpc/configs/fsl-emb-nonhw.config
@@ -15,7 +15,6 @@ CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUPS=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_CRC_T10DIF=y
 CONFIG_CPUSETS=y
 CONFIG_CRAMFS=y
 CONFIG_CRYPTO_MD4=y
@@ -112,7 +111,6 @@ CONFIG_QNX4FS_FS=m
 CONFIG_RCU_TRACE=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_ROOT_NFS=y
-CONFIG_SYSV_FS=m
 CONFIG_SYSVIPC=y
 CONFIG_TMPFS=y
 CONFIG_UBIFS_FS=y
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 9215bed53291..428f17b45513 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -231,12 +231,11 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_UTF8=y
-CONFIG_CRC_T10DIF=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_BOOTX_TEXT=y
-CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig
index d77eeb525366..cdd99657b71b 100644
--- a/arch/powerpc/configs/gamecube_defconfig
+++ b/arch/powerpc/configs/gamecube_defconfig
@@ -82,7 +82,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_CIFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index fa707de761be..b564f9e33a0d 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -125,8 +125,6 @@ CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_932=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_UTF8=m
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
diff --git a/arch/powerpc/configs/microwatt_defconfig b/arch/powerpc/configs/microwatt_defconfig
index a64fb1ef8c75..d81989a6f59b 100644
--- a/arch/powerpc/configs/microwatt_defconfig
+++ b/arch/powerpc/configs/microwatt_defconfig
@@ -62,7 +62,6 @@ CONFIG_LITEX_LITEETH=y
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_NONSTANDARD=y
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 83c4710017e9..a815d9e5e3e8 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig

path: root/kernel/sys.c

// SPDX-License-Identifier: GPL-2.0
/*
 *  linux/kernel/sys.c
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 */

#include <linux/export.h>
#include <linux/mm.h>
#include <linux/utsname.h>
#include <linux/mman.h>
#include <linux/reboot.h>
#include <linux/prctl.h>
#include <linux/highuid.h>
#include <linux/fs.h>
#include <linux/kmod.h>
#include <linux/perf_event.h>
#include <linux/resource.h>
#include <linux/kernel.h>
#include <linux/workqueue.h>
#include <linux/capability.h>
#include <linux/device.h>
#include <linux/key.h>
#include <linux/times.h>
#include <linux/posix-timers.h>
#include <linux/security.h>
#include <linux/dcookies.h>
#include <linux/suspend.h>
#include <linux/tty.h>
#include <linux/signal.h>
#include <linux/cn_proc.h>
#include <linux/getcpu.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/seccomp.h>
#include <linux/cpu.h>
#include <linux/personality.h>
#include <linux/ptrace.h>
#include <linux/fs_struct.h>
#include <linux/file.h>
#include <linux/mount.h>
#include <linux/gfp.h>
#include <linux/syscore_ops.h>
#include <linux/version.h>
#include <linux/ctype.h>

#include <linux/compat.h>
#include <linux/syscalls.h>
#include <linux/kprobes.h>
#include <linux/user_namespace.h>
#include <linux/binfmts.h>

#include <linux/sched.h>
#include <linux/sched/autogroup.h>
#include <linux/sched/loadavg.h>
#include <linux/sched/stat.h>
#include <linux/sched/mm.h>
#include <linux/sched/coredump.h>
#include <linux/sched/task.h>
#include <linux/sched/cputime.h>
#include <linux/rcupdate.h>
#include <linux/uidgid.h>
#include <linux/cred.h>

#include <linux/nospec.h>

#include <linux/kmsg_dump.h>
/* Move somewhere else to avoid recompiling? */
#include <generated/utsrelease.h>

#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/unistd.h>

#include "uid16.h"

#ifndef SET_UNALIGN_CTL
# define SET_UNALIGN_CTL(a, b)	(-EINVAL)
#endif
#ifndef GET_UNALIGN_CTL
# define GET_UNALIGN_CTL(a, b)	(-EINVAL)
#endif
#ifndef SET_FPEMU_CTL
# define SET_FPEMU_CTL(a, b)	(-EINVAL)
#endif
#ifndef GET_FPEMU_CTL
# define GET_FPEMU_CTL(a, b)	(-EINVAL)
#endif
#ifndef SET_FPEXC_CTL
# define SET_FPEXC_CTL(a, b)	(-EINVAL)
#endif
#ifndef GET_FPEXC_CTL
# define GET_FPEXC_CTL(a, b)	(-EINVAL)
#endif
#ifndef GET_ENDIAN
# define GET_ENDIAN(a, b)	(-EINVAL)
#endif
#ifndef SET_ENDIAN
# define SET_ENDIAN(a, b)	(-EINVAL)
#endif
#ifndef GET_TSC_CTL
# define GET_TSC_CTL(a)		(-EINVAL)
#endif
#ifndef SET_TSC_CTL
# define SET_TSC_CTL(a)		(-EINVAL)
#endif
#ifndef MPX_ENABLE_MANAGEMENT
# define MPX_ENABLE_MANAGEMENT()	(-EINVAL)
#endif
#ifndef MPX_DISABLE_MANAGEMENT
# define MPX_DISABLE_MANAGEMENT()	(-EINVAL)
#endif
#ifndef GET_FP_MODE
# define GET_FP_MODE(a)		(-EINVAL)
#endif
#ifndef SET_FP_MODE
# define SET_FP_MODE(a,b)	(-EINVAL)
#endif
#ifndef SVE_SET_VL
# define SVE_SET_VL(a)		(-EINVAL)
#endif
#ifndef SVE_GET_VL
# define SVE_GET_VL()		(-EINVAL)
#endif

/*
 * this is where the system-wide overflow UID and GID are defined, for
 * architectures that now have 32-bit UID/GID but didn't in the past
 */

int overflowuid = DEFAULT_OVERFLOWUID;
int overflowgid = DEFAULT_OVERFLOWGID;

EXPORT_SYMBOL(overflowuid);
EXPORT_SYMBOL(overflowgid);

/*
 * the same as above, but for filesystems which can only store a 16-bit
 * UID and GID. as such, this is needed on all architectures
 */

int fs_overflowuid = DEFAULT_FS_OVERFLOWUID;
int fs_overflowgid = DEFAULT_FS_OVERFLOWGID;

EXPORT_SYMBOL(fs_overflowuid);
EXPORT_SYMBOL(fs_overflowgid);

/*
 * Returns true if current's euid is same as p's uid or euid,
 * or has CAP_SYS_NICE to p's user_ns.
 *
 * Called with rcu_read_lock, creds are safe
 */
static bool set_one_prio_perm(struct task_struct *p)
{
	const struct cred *cred = current_cred(), *pcred = __task_cred(p);

	if (uid_eq(pcred->uid,  cred->euid) ||
	    uid_eq(pcred->euid, cred->euid))
		return true;
	if (ns_capable(pcred->user_ns, CAP_SYS_NICE))
		return true;
	return false;
}

/*
 * set the priority of a task
 * - the caller must hold the RCU read lock
 */
static int set_one_prio(struct task_struct *p, int niceval, int error)
{
	int no_nice;

	if (!set_one_prio_perm(p)) {
		error = -EPERM;
		goto out;
	}
	if (niceval < task_nice(p) && !can_nice(p, niceval)) {
		error = -EACCES;
		goto out;
	}
	no_nice = security_task_setnice(p, niceval);
	if (no_nice) {
		error = no_nice;
		goto out;
	}
	if (error == -ESRCH)
		error = 0;
	set_user_nice(p, niceval);
out:
	return error;
}

SYSCALL_DEFINE3(setpriority, int, which, int, who, int, niceval)
{
	struct task_struct *g, *p;
	struct user_struct *user;
	const struct cred *cred = current_cred();
	int error = -EINVAL;
	struct pid *pgrp;
	kuid_t uid;

	if (which > PRIO_USER || which < PRIO_PROCESS)
		goto out;

	/* normalize: avoid signed division (rounding problems) */
	error = -ESRCH;
	if (niceval < MIN_NICE)
		niceval = MIN_NICE;
	if (niceval > MAX_NICE)
		niceval = MAX_NICE;

	rcu_read_lock();
	read_lock(&tasklist_lock);
	switch (which) {
	case PRIO_PROCESS:
		if (who)
			p = find_task_by_vpid(who);
		else
			p = current;
		if (p)
			error = set_one_prio(p, niceval, error);
		break;
	case PRIO_PGRP:
		if (who)
			pgrp = find_vpid(who);
		else
			pgrp = task_pgrp(current);
		do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
			error = set_one_prio(p, niceval, error);
		} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
		break;
	case PRIO_USER:
		uid = make_kuid(cred->user_ns, who);
		user = cred->user;
		if (!who)
			uid = cred->uid;
		else if (!uid_eq(uid, cred->uid)) {
			user = find_user(uid);
			if (!user)
				goto out_unlock;	/* No processes for this user */
		}
		do_each_thread(g, p) {
			if (uid_eq(task_uid(p), uid) && task_pid_vnr(p))
				error = set_one_prio(p, niceval, error);
		} while_each_thread(g, p);
		if (!uid_eq(uid, cred->uid))
			free_uid(user);		/* For find_user() */
		break;
	}
out_unlock:
	read_unlock(&tasklist_lock);
	rcu_read_unlock();
out:
	return error;
}

/*
 * Ugh. To avoid negative return values, "getpriority()" will
 * not return the normal nice-value, but a negated value that
 * has been offset by 20 (ie it returns 40..1 instead of -20..19)
 * to stay compatible.
 */
SYSCALL_DEFINE2(getpriority, int, which, int, who)
{
	struct task_struct *g, *p;
	struct user_struct *user;
	const struct cred *cred = current_cred();
	long niceval, retval = -ESRCH;
	struct pid *pgrp;
	kuid_t uid;

	if (which > PRIO_USER || which < PRIO_PROCESS)
		return -EINVAL;

	rcu_read_lock();
	read_lock(&tasklist_lock);
	switch (which) {
	case PRIO_PROCESS:
		if (who)
			p = find_task_by_vpid(who);
		else
			p = current;
		if (p) {
			niceval = nice_to_rlimit(task_nice(p));
			if (niceval > retval)
				retval = niceval;
		}
		break;
	case PRIO_PGRP:
		if (who)
			pgrp = find_vpid(who);
		else
			pgrp = task_pgrp(current);
		do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
			niceval = nice_to_rlimit(task_nice(p));
			if (niceval > retval)
				retval = niceval;
		} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
		break;
	case PRIO_USER:
		uid = make_kuid(cred->user_ns, who);
		user = cred->user;
		if (!who)
			uid = cred->uid;
		else if (!uid_eq(uid, cred->uid)) {
			user = find_user(uid);
			if (!user)
				goto out_unlock;	/* No processes for this user */
		}
		do_each_thread(g, p) {
			if (uid_eq(task_uid(p), uid) && task_pid_vnr(p)) {
				niceval = nice_to_rlimit(task_nice(p));
				if (niceval > retval)
					retval = niceval;
			}
		} while_each_thread(g, p);
		if (!uid_eq(uid, cred->uid))
			free_uid(user);		/* for find_user() */
		break;
	}
out_unlock:
	read_unlock(&tasklist_lock);
	rcu_read_unlock();

	return retval;
}

/*
 * Unprivileged users may change the real gid to the effective gid
 * or vice versa.  (BSD-style)
 *
 * If you set the real gid at all, or set the effective gid to a value not
 * equal to the real gid, then the saved gid is set to the new effective gid.
 *
 * This makes it possible for a setgid program to completely drop its
 * privileges, which is often a useful assertion to make when you are doing
 * a security audit over a program.
 *
 * The general idea is that a program which uses just setregid() will be
 * 100% compatible with BSD.  A program which uses just setgid() will be
 * 100% compatible with POSIX with saved IDs.
 *
 * SMP: There are not races, the GIDs are checked only by filesystem
 *      operations (as far as semantic preservation is concerned).
 */
#ifdef CONFIG_MULTIUSER
long __sys_setregid(gid_t rgid, gid_t egid)
{
	struct user_namespace *ns = current_user_ns();
	const struct cred *old;
	struct cred *new;
	int retval;
	kgid_t krgid, kegid;

	krgid = make_kgid(ns, rgid);
	kegid = make_kgid(ns, egid);

	if ((rgid != (gid_t) -1) && !gid_valid(krgid))
		return -EINVAL;
	if ((egid != (gid_t) -1) && !gid_valid(kegid))
		return -EINVAL;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;
	old = current_cred();

	retval = -EPERM;
	if (rgid != (gid_t) -1) {
		if (gid_eq(old->gid, krgid) ||
		    gid_eq(old->egid, krgid) ||
		    ns_capable(old->user_ns, CAP_SETGID))
			new->gid = krgid;
		else
			goto error;
	}
	if (egid != (gid_t) -1) {
		if (gid_eq(old->gid, kegid) ||
		    gid_eq(old->egid, kegid) ||
		    gid_eq(old->sgid, kegid) ||
		    ns_capable(old->user_ns, CAP_SETGID))
			new->egid = kegid;
		else
			goto error;
	}

	if (rgid != (gid_t) -1 ||
	    (egid != (gid_t) -1 && !gid_eq(kegid, old->gid)))
		new->sgid = new->egid;
	new->fsgid = new->egid;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}

SYSCALL_DEFINE2(setregid, gid_t, rgid, gid_t, egid)
{
	return __sys_setregid(rgid, egid);
}

/*
 * setgid() is implemented like SysV w/ SAVED_IDS
 *
 * SMP: Same implicit races as above.
 */
long __sys_setgid(gid_t gid)
{
	struct user_namespace *ns = current_user_ns();
	const struct cred *old;
	struct cred *new;
	int retval;
	kgid_t kgid;

	kgid = make_kgid(ns, gid);
	if (!gid_valid(kgid))
		return -EINVAL;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;
	old = current_cred();

	retval = -EPERM;
	if (ns_capable(old->user_ns, CAP_SETGID))
		new->gid = new->egid = new->sgid = new->fsgid = kgid;
	else if (gid_eq(kgid, old->gid) || gid_eq(kgid, old->sgid))
		new->egid = new->fsgid = kgid;
	else
		goto error;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}

SYSCALL_DEFINE1(setgid, gid_t, gid)
{
	return __sys_setgid(gid);
}

/*
 * change the user struct in a credentials set to match the new UID
 */
static int set_user(struct cred *new)
{
	struct user_struct *new_user;

	new_user = alloc_uid(new->uid);
	if (!new_user)
		return -EAGAIN;

	/*
	 * We don't fail in case of NPROC limit excess here because too many
	 * poorly written programs don't check set*uid() return code, assuming
	 * it never fails if called by root.  We may still enforce NPROC limit
	 * for programs doing set*uid()+execve() by harmlessly deferring the
	 * failure to the execve() stage.
	 */
	if (atomic_read(&new_user->processes) >= rlimit(RLIMIT_NPROC) &&
			new_user != INIT_USER)
		current->flags |= PF_NPROC_EXCEEDED;
	else
		current->flags &= ~PF_NPROC_EXCEEDED;

	free_uid(new->user);
	new->user = new_user;
	return 0;
}

/*
 * Unprivileged users may change the real uid to the effective uid
 * or vice versa.  (BSD-style)
 *
 * If you set the real uid at all, or set the effective uid to a value not
 * equal to the real uid, then the saved uid is set to the new effective uid.
 *
 * This makes it possible for a setuid program to completely drop its
 * privileges, which is often a useful assertion to make when you are doing
 * a security audit over a program.
 *
 * The general idea is that a program which uses just setreuid() will be
 * 100% compatible with BSD.  A program which uses just setuid() will be
 * 100% compatible with POSIX with saved IDs.
 */
long __sys_setreuid(uid_t ruid, uid_t euid)
{
	struct user_namespace *ns = current_user_ns();
	const struct cred *old;
	struct cred *new;
	int retval;
	kuid_t kruid, keuid;

	kruid = make_kuid(ns, ruid);
	keuid = make_kuid(ns, euid);

	if ((ruid != (uid_t) -1) && !uid_valid(kruid))
		return -EINVAL;
	if ((euid != (uid_t) -1) && !uid_valid(keuid))
		return -EINVAL;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;
	old = current_cred();

	retval = -EPERM;
	if (ruid != (uid_t) -1) {
		new->uid = kruid;
		if (!uid_eq(old->uid, kruid) &&
		    !uid_eq(old->euid, kruid) &&
		    !ns_capable(old->user_ns, CAP_SETUID))
			goto error;
	}

	if (euid != (uid_t) -1) {
		new->euid = keuid;
		if (!uid_eq(old->uid, keuid) &&
		    !uid_eq(old->euid, keuid) &&
		    !uid_eq(old->suid, keuid) &&
		    !ns_capable(old->user_ns, CAP_SETUID))
			goto error;
	}

	if (!uid_eq(new->uid, old->uid)) {
		retval = set_user(new);
		if (retval < 0)
			goto error;
	}
	if (ruid != (uid_t) -1 ||
	    (euid != (uid_t) -1 && !uid_eq(keuid, old->uid)))
		new->suid = new->euid;
	new->fsuid = new->euid;

	retval = security_task_fix_setuid(new, old, LSM_SETID_RE);
	if (retval < 0)
		goto error;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}

SYSCALL_DEFINE2(setreuid, uid_t, ruid, uid_t, euid)
{
	return __sys_setreuid(ruid, euid);
}

/*
 * setuid() is implemented like SysV with SAVED_IDS
 *
 * Note that SAVED_ID's is deficient in that a setuid root program
 * like sendmail, for example, cannot set its uid to be a normal
 * user and then switch back, because if you're root, setuid() sets
 * the saved uid too.  If you don't like this, blame the bright people
 * in the POSIX committee and/or USG.  Note that the BSD-style setreuid()
 * will allow a root program to temporarily drop privileges and be able to
 * regain them by swapping the real and effective uid.
 */
long __sys_setuid(uid_t uid)
{
	struct user_namespace *ns = current_user_ns();
	const struct cred *old;
	struct cred *new;
	int retval;
	kuid_t kuid;

	kuid = make_kuid(ns, uid);
	if (!uid_valid(kuid))
		return -EINVAL;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;
	old = current_cred();

	retval = -EPERM;
	if (ns_capable(old->user_ns, CAP_SETUID)) {
		new->suid = new->uid = kuid;
		if (!uid_eq(kuid, old->uid)) {
			retval = set_user(new);
			if (retval < 0)
				goto error;
		}
	} else if (!uid_eq(kuid, old->uid) && !uid_eq(kuid, new->suid)) {
		goto error;
	}

	new->fsuid = new->euid = kuid;

	retval = security_task_fix_setuid(new, old, LSM_SETID_ID);
	if (retval < 0)
		goto error;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}

SYSCALL_DEFINE1(setuid, uid_t, uid)
{
	return __sys_setuid(uid);
}


/*
 * This function implements a generic ability to update ruid, euid,
 * and suid.  This allows you to implement the 4.4 compatible seteuid().
 */
long __sys_setresuid(uid_t ruid, uid_t euid, uid_t suid)
{
	struct user_namespace *ns = current_user_ns();
	const struct cred *old;
	struct cred *new;
	int retval;
	kuid_t kruid, keuid, ksuid;

	kruid = make_kuid(ns, ruid);
	keuid = make_kuid(ns, euid);
	ksuid = make_kuid(ns, suid);

	if ((ruid != (uid_t) -1) && !uid_valid(kruid))
		return -EINVAL;

	if ((euid != (uid_t) -1) && !uid_valid(keuid))
		return -EINVAL;

	if ((suid != (uid_t) -1) && !uid_valid(ksuid))
		return -EINVAL;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;

	old = current_cred();

	retval = -EPERM;
	if (!ns_capable(old->user_ns, CAP_SETUID)) {
		if (ruid != (uid_t) -1        && !uid_eq(kruid, old->uid) &&
		    !uid_eq(kruid, old->euid) && !uid_eq(kruid, old->suid))
			goto error;
		if (euid != (uid_t) -1        && !uid_eq(keuid, old->uid) &&
		    !uid_eq(keuid, old->euid) && !uid_eq(keuid, old->suid))
			goto error;
		if (suid != (uid_t) -1        && !uid_eq(ksuid, old->uid) &&
		    !uid_eq(ksuid, old->euid) && !uid_eq(ksuid, old->suid))
			goto error;
	}

	if (ruid != (uid_t) -1) {
		new->uid = kruid;
		if (!uid_eq(kruid, old->uid)) {
			retval = set_user(new);
			if (retval < 0)
				goto error;
		}
	}
	if (euid != (uid_t) -1)
		new->euid = keuid;
	if (suid != (uid_t) -1)
		new->suid = ksuid;
	new->fsuid = new->euid;

	retval = security_task_fix_setuid(new, old, LSM_SETID_RES);
	if (retval < 0)
		goto error;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}

SYSCALL_DEFINE3(setresuid, uid_t, ruid, uid_t, euid, uid_t, suid)
{
	return __sys_setresuid(ruid, euid, suid);
}

SYSCALL_DEFINE3(getresuid, uid_t __user *, ruidp, uid_t __user *, euidp, uid_t __user *, suidp)
{
	const struct cred *cred = current_cred();
	int retval;
	uid_t ruid, euid, suid;

	ruid = from_kuid_munged(cred->user_ns, cred->uid);
	euid = from_kuid_munged(cred->user_ns, cred->euid);
	suid = from_kuid_munged(cred->user_ns, cred->suid);

	retval = put_user(ruid, ruidp);
	if (!retval) {
		retval = put_user(euid, euidp);
		if (!retval)
			return put_user(suid, suidp);
	}
	return retval;
}

/*
 * Same as above, but for rgid, egid, sgid.
 */
long __sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid)
{
	struct user_namespace *ns = current_user_ns();
	const struct cred *old;
	struct cred *new;
	int retval;
	kgid_t krgid, kegid, ksgid;

	krgid = make_kgid(ns, rgid);
	kegid = make_kgid(ns, egid);
	ksgid = make_kgid(ns, sgid);

	if ((rgid != (gid_t) -1) && !gid_valid(krgid))
		return -EINVAL;
	if ((egid != (gid_t) -1) && !gid_valid(kegid))
		return -EINVAL;
	if ((sgid != (gid_t) -1) && !gid_valid(ksgid))
		return -EINVAL;

	new = prepare_creds();
	if (!new)
		return -ENOMEM;
	old = current_cred();

	retval = -EPERM;
	if (!ns_capable(old->user_ns, CAP_SETGID)) {
		if (rgid != (gid_t) -1        && !gid_eq(krgid, old->gid) &&
		    !gid_eq(krgid, old->egid) && !gid_eq(krgid, old->sgid))
			goto error;
		if (egid != (gid_t) -1        && !gid_eq(kegid, old->gid) &&
		    !gid_eq(kegid, old->egid) && !gid_eq(kegid, old->sgid))
			goto error;
		if (sgid != (gid_t) -1        && !gid_eq(ksgid, old->gid) &&
		    !gid_eq(ksgid, old->egid) && !gid_eq(ksgid, old->sgid))
			goto error;
	}

	if (rgid != (gid_t) -1)
		new->gid = krgid;
	if (egid != (gid_t) -1)
		new->egid = kegid;
	if (sgid != (gid_t) -1)
		new->sgid = ksgid;
	new->fsgid = new->egid;

	return commit_creds(new);

error:
	abort_creds(new);
	return retval;
}

SYSCALL_DEFINE3(setresgid, gid_t, rgid, gid_t, egid, gid_t, sgid)
{
	return __sys_setresgid(rgid, egid, sgid);
}

SYSCALL_DEFINE3(getresgid, gid_t __user *, rgidp, gid_t __user *, egidp, gid_t __user *, sgidp)
{
	const struct cred *cred = current_cred();
	int retval;
	gid_t rgid, egid, sgid;

	rgid = from_kgid_munged(cred->user_ns, cred->gid);
	egid = from_kgid_munged(cred->user_ns, cred->egid);
	sgid = from_kgid_munged(cred->user_ns, cred->sgid);

	retval = put_user(rgid, rgidp);
	if (!retval) {
		retval = put_user(egid, egidp);
		if (!retval)
			retval = put_user(sgid, sgidp);
	}

	return retval;
}


/*
 * "setfsuid()" sets the fsuid - the uid used for filesystem checks. This
 * is used for "access()" and for the NFS daemon (letting nfsd stay at
 * whatever uid it wants to). It normally shadows "euid", except when
 * explicitly set by setfsuid() or for access..
 */
long __sys_setfsuid(uid_t uid)
{
	const struct cred *old;
	struct cred *new;
	uid_t old_fsuid;
	kuid_t kuid;

	old = current_cred();
	old_fsuid = from_kuid_munged(old->user_ns, old->fsuid);

	kuid = make_kuid(old->user_ns, uid);
	if (!uid_valid(kuid))
		return old_fsuid;

	new = prepare_creds();
	if (!new)
		return old_fsuid;

	if (uid_eq(kuid, old->uid)  || uid_eq(kuid, old->euid)  ||
	    uid_eq(kuid, old->suid) || uid_eq(kuid, old->fsuid) ||
	    ns_capable(old->user_ns, CAP_SETUID)) {
		if (!uid_eq(kuid, old->fsuid)) {
			new->fsuid = kuid;
			if (security_task_fix_setuid(new, old, LSM_SETID_FS) == 0)
				goto change_okay;
		}
	}

	abort_creds(new);
	return old_fsuid;

change_okay:
	commit_creds(new);
	return old_fsuid;
}

SYSCALL_DEFINE1(setfsuid, uid_t, uid)
{
	return __sys_setfsuid(uid);
}

/*
 * Samma på svenska..
 */
long __sys_setfsgid(gid_t gid)
{
	const struct cred *old;
	struct cred *new;
	gid_t old_fsgid;
	kgid_t kgid;

	old = current_cred();
	old_fsgid = from_kgid_munged(old->user_ns, old->fsgid);

	kgid = make_kgid(old->user_ns, gid);
	if (!gid_valid(kgid))
		return old_fsgid;

	new = prepare_creds();
	if (!new)
		return old_fsgid;

	if (gid_eq(kgid, old->gid)  || gid_eq(kgid, old->egid)  ||
	    gid_eq(kgid, old->sgid) || gid_eq(kgid, old->fsgid) ||
	    ns_capable(old->user_ns, CAP_SETGID)) {
		if (!gid_eq(kgid, old->fsgid)) {
			new->fsgid = kgid;
			goto change_okay;
		}
	}

	abort_creds(new);
	return old_fsgid;

change_okay:
	commit_creds(new);
	return old_fsgid;
}

SYSCALL_DEFINE1(setfsgid, gid_t, gid)
{
	return __sys_setfsgid(gid);
}
#endif /* CONFIG_MULTIUSER */

/**
 * sys_getpid - return the thread group id of the current process
 *
 * Note, despite the name, this returns the tgid not the pid.  The tgid and
 * the pid are identical unless CLONE_THREAD was specified on clone() in
 * which case the tgid is the same in all threads of the same group.
 *
 * This is SMP safe as current->tgid does not change.
 */
SYSCALL_DEFINE0(getpid)
{
	return task_tgid_vnr(current);
}

/* Thread ID - the internal kernel "pid" */
SYSCALL_DEFINE0(gettid)
{
	return task_pid_vnr(current);
}

/*
 * Accessing ->real_parent is not SMP-safe, it could
 * change from under us. However, we can use a stale
 * value of ->real_parent under rcu_read_lock(), see
 * release_task()->call_rcu(delayed_put_task_struct).
 */
SYSCALL_DEFINE0(getppid)
{
	int pid;

	rcu_read_lock();
	pid = task_tgid_vnr(rcu_dereference(current->real_parent));
	rcu_read_unlock();

	return pid;
}

SYSCALL_DEFINE0(getuid)
{
	/* Only we change this so SMP safe */
	return from_kuid_munged(current_user_ns(), current_uid());
}

SYSCALL_DEFINE0(geteuid)
{
	/* Only we change this so SMP safe */
	return from_kuid_munged(current_user_ns(), current_euid());
}

SYSCALL_DEFINE0(getgid)
{
	/* Only we change this so SMP safe */
	return from_kgid_munged(current_user_ns(), current_gid());
}

SYSCALL_DEFINE0(getegid)
{
	/* Only we change this so SMP safe */
	return from_kgid_munged(current_user_ns(), current_egid());
}

static void do_sys_times(struct tms *tms)
{
	u64 tgutime, tgstime, cutime, cstime;

	thread_group_cputime_adjusted(current, &tgutime, &tgstime);
	cutime = current->signal->cutime;
	cstime = current->signal->cstime;
	tms->tms_utime = nsec_to_clock_t(tgutime);
	tms->tms_stime = nsec_to_clock_t(tgstime);
	tms->tms_cutime = nsec_to_clock_t(cutime);
	tms->tms_cstime = nsec_to_clock_t(cstime);
}

SYSCALL_DEFINE1(times, struct tms __user *, tbuf)
{
	if (tbuf) {
		struct tms tmp;

		do_sys_times(&tmp);
		if (copy_to_user(tbuf, &tmp, sizeof(struct tms)))
			return -EFAULT;
	}
	force_successful_syscall_return();
	return (long) jiffies_64_to_clock_t(get_jiffies_64());
}

#ifdef CONFIG_COMPAT
static compat_clock_t clock_t_to_compat_clock_t(clock_t x)
{
	return compat_jiffies_to_clock_t(clock_t_to_jiffies(x));
}

COMPAT_SYSCALL_DEFINE1(times, struct compat_tms __user *, tbuf)
{
	if (tbuf) {
		struct tms tms;
		struct compat_tms tmp;

		do_sys_times(&tms);
		/* Convert our struct tms to the compat version. */
		tmp.tms_utime = clock_t_to_compat_clock_t(tms.tms_utime);
		tmp.tms_stime = clock_t_to_compat_clock_t(tms.tms_stime);
		tmp.tms_cutime = clock_t_to_compat_clock_t(tms.tms_cutime);
		tmp.tms_cstime = clock_t_to_compat_clock_t(tms.tms_cstime);
		if (copy_to_user(tbuf, &tmp, sizeof(tmp)))
			return -EFAULT;
	}
	force_successful_syscall_return();
	return compat_jiffies_to_clock_t(jiffies);
}
#endif

/*
 * This needs some heavy checking ...
 * I just haven't the stomach for it. I also don't fully
 * understand sessions/pgrp etc. Let somebody who does explain it.
 *
 * OK, I think I have the protection semantics right.... this is really
 * only important on a multi-user system anyway, to make sure one user
 * can't send a signal to a process owned by another.  -TYT, 12/12/91
 *
 * !PF_FORKNOEXEC check to conform completely to POSIX.
 */
SYSCALL_DEFINE2(setpgid, pid_t, pid, pid_t, pgid)
{
	struct task_struct *p;
	struct task_struct *group_leader = current->group_leader;
	struct pid *pgrp;
	int err;

	if (!pid)
		pid = task_pid_vnr(group_leader);
	if (!pgid)
		pgid = pid;
	if (pgid < 0)
		return -EINVAL;
	rcu_read_lock();

	/* From this point forward we keep holding onto the tasklist lock
	 * so that our parent does not change from under us. -DaveM
	 */
	write_lock_irq(&tasklist_lock);

	err = -ESRCH;
	p = find_task_by_vpid(pid);
	if (!p)
		goto out;

	err = -EINVAL;
	if (!thread_group_leader(p))
		goto out;

	if (same_thread_group(p->real_parent, group_leader)) {
		err = -EPERM;
		if (task_session(p) != task_session(group_leader))
			goto out;
		err = -EACCES;
		if (!(p->flags & PF_FORKNOEXEC))
			goto out;
	} else {
		err = -ESRCH;
		if (p != group_leader)
			goto out;
	}

	err = -EPERM;
	if (p->signal->leader)
		goto out;

	pgrp = task_pid(p);
	if (pgid != pid) {
		struct task_struct *g;

		pgrp = find_vpid(pgid);
		g = pid_task(pgrp, PIDTYPE_PGID);
		if (!g || task_session(g) != task_session(group_leader))
			goto out;
	}

	err = security_task_setpgid(p, pgid);
	if (err)
		goto out;

	if (task_pgrp(p) != pgrp)
		change_pid(p, PIDTYPE_PGID, pgrp);

	err = 0;
out:
	/* All paths lead to here, thus we are safe. -DaveM */
	write_unlock_irq(&tasklist_lock);
	rcu_read_unlock();
	return err;
}

static int do_getpgid(pid_t pid)
{
	struct task_struct *p;
	struct pid *grp;
	int retval;

	rcu_read_lock();
	if (!pid)
		grp = task_pgrp(current);
	else {
		retval = -ESRCH;
		p = find_task_by_vpid(pid);
		if (!p)
			goto out;
		grp = task_pgrp(p);
		if (!grp)
			goto out;

		retval = security_task_getpgid(p);
		if (retval)
			goto out;
	}
	retval = pid_vnr(grp);
out:
	rcu_read_unlock();
	return retval;
}

SYSCALL_DEFINE1(getpgid, pid_t, pid)
{
	return do_getpgid(pid);
}

#ifdef __ARCH_WANT_SYS_GETPGRP

SYSCALL_DEFINE0(getpgrp)
{
	return do_getpgid(0);
}

#endif

SYSCALL_DEFINE1(getsid, pid_t, pid)
{
	struct task_struct *p;
	struct pid *sid;
	int retval;

	rcu_read_lock();
	if (!pid)
		sid = task_session(current);
	else {
		retval = -ESRCH;
		p = find_task_by_vpid(pid);
		if (!p)
			goto out;
		sid = task_session(p);
		if (!sid)
			goto out;

		retval = security_task_getsid(p);
		if (retval)
			goto out;
	}
	retval = pid_vnr(sid);
out:
	rcu_read_unlock();
	return retval;
}

static void set_special_pids(struct pid *pid)
{
	struct task_struct *curr = current->group_leader;

	if (task_session(curr) != pid)
		change_pid(curr, PIDTYPE_SID, pid);

	if (task_pgrp(curr) != pid)
		change_pid(curr, PIDTYPE_PGID, pid);
}

int ksys_setsid(void)
{
	struct task_struct *group_leader = current->group_leader;
	struct pid *sid = task_pid(group_leader);
	pid_t session = pid_vnr(sid);
	int err = -EPERM;

	write_lock_irq(&tasklist_lock);
	/* Fail if I am already a session leader */
	if (group_leader->signal->leader)
		goto out;

	/* Fail if a process group id already exists that equals the
	 * proposed session id.
	 */
	if (pid_task(sid, PIDTYPE_PGID))
		goto out;

	group_leader->signal->leader = 1;
	set_special_pids(sid);

	proc_clear_tty(group_leader);

	err = session;
out:
	write_unlock_irq(&tasklist_lock);
	if (err > 0) {
		proc_sid_connector(group_leader);
		sched_autogroup_create_attach(group_leader);
	}
	return err;
}

SYSCALL_DEFINE0(setsid)
{
	return ksys_setsid();
}

DECLARE_RWSEM(uts_sem);

#ifdef COMPAT_UTS_MACHINE
#define override_architecture(name) \
	(personality(current->personality) == PER_LINUX32 && \
	 copy_to_user(name->machine, COMPAT_UTS_MACHINE, \
		      sizeof(COMPAT_UTS_MACHINE)))
#else
#define override_architecture(name)	0
#endif

/*
 * Work around broken programs that cannot handle "Linux 3.0".
 * Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40
 * And we map 4.x to 2.6.60+x, so 4.0 would be 2.6.60.
 */
static int override_release(char __user *release, size_t len)
{
	int ret = 0;

	if (current->personality & UNAME26) {
		const char *rest = UTS_RELEASE;
		char buf[65] = { 0 };
		int ndots = 0;
		unsigned v;
		size_t copy;

		while (*rest) {
			if (*rest == '.' && ++ndots >= 3)
				break;
			if (!isdigit(*rest) && *rest != '.')
				break;
			rest++;
		}
		v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 60;
		copy = clamp_t(size_t, len, 1, sizeof(buf));
		copy = scnprintf(buf, copy, "2.6.%u%s", v, rest);
		ret = copy_to_user(release, buf, copy + 1);
	}
	return ret;
}

SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
{
	struct new_utsname tmp;

	down_read(&uts_sem);
	memcpy(&tmp, utsname(), sizeof(tmp));
	up_read(&uts_sem);
	if (copy_to_user(name, &tmp, sizeof(tmp)))
		return -EFAULT;

	if (override_release(name->release, sizeof(name->release)))
		return -EFAULT;
	if (override_architecture(name))
		return -EFAULT;
	return 0;
}

#ifdef __ARCH_WANT_SYS_OLD_UNAME
/*
 * Old cruft
 */
SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
{
	struct old_utsname tmp;

	if (!name)
		return -EFAULT;

	down_read(&uts_sem);
	memcpy(&tmp, utsname(), sizeof(tmp));
	up_read(&uts_sem);
	if (copy_to_user(name, &tmp, sizeof(tmp)))
		return -EFAULT;

	if (override_release(name->release, sizeof(name->release)))
		return -EFAULT;
	if (override_architecture(name))
		return -EFAULT;
	return 0;
}

SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
{
	struct oldold_utsname tmp = {};

	if (!name)
		return -EFAULT;

	down_read(&uts_sem);
	memcpy(&tmp.sysname, &utsname()->sysname, __OLD_UTS_LEN);
	memcpy(&tmp.nodename, &utsname()->nodename, __OLD_UTS_LEN);
	memcpy(&tmp.release, &utsname()->release, __OLD_UTS_LEN);
	memcpy(&tmp.version, &utsname()->version, __OLD_UTS_LEN);
	memcpy(&tmp.machine, &utsname()->machine, __OLD_UTS_LEN);
	up_read(&uts_sem);
	if (copy_to_user(name, &tmp, sizeof(tmp)))
		return -EFAULT;

	if (override_architecture(name))
		return -EFAULT;
	if (override_release(name->release, sizeof(name->release)))
		return -EFAULT;
	return 0;
}
#endif

SYSCALL_DEFINE2(sethostname, char __user *, name, int, len)
{
	int errno;
	char tmp[__NEW_UTS_LEN];

	if (!ns_capable(current->nsproxy->uts_ns->user_ns, CAP_SYS_ADMIN))
		return -EPERM;

	if (len < 0 || len > __NEW_UTS_LEN)
		return -EINVAL;
	errno = -EFAULT;
	if (!copy_from_user(tmp, name, len)) {
		struct new_utsname *u;

		down_write(&uts_sem);
		u = utsname();
		memcpy(u->nodename, tmp, len);
		memset(u->nodename + len, 0, sizeof(u->nodename) - len);
		errno = 0;
		uts_proc_notify(UTS_PROC_HOSTNAME);
		up_write(&uts_sem);
	}
	return errno;
}

#ifdef __ARCH_WANT_SYS_GETHOSTNAME

SYSCALL_DEFINE2(gethostname, char __user *, name, int, len)
{
	int i;
	struct new_utsname *u;
	char tmp[__NEW_UTS_LEN + 1];

	if (len < 0)
		return -EINVAL;
	down_read(&uts_sem);
	u = utsname();
	i = 1 + strlen(u->nodename);
	if (i > len)
		i = len;
	memcpy(tmp, u->nodename, i);
	up_read(&uts_sem);
	if (copy_to_user(name, tmp, i))
		return -EFAULT;
	return 0;
}

#endif

/*
 * Only setdomainname; getdomainname can be implemented by calling
 * uname()
 */
SYSCALL_DEFINE2(setdomainname, char __user *, name, int, len)
{
	int errno;
	char tmp[__NEW_UTS_LEN];

	if (!ns_capable(current->nsproxy->uts_ns->user_ns, CAP_SYS_ADMIN))
		return -EPERM;
	if (len < 0 || len > __NEW_UTS_LEN)
		return -EINVAL;

	errno = -EFAULT;
	if (!copy_from_user(tmp, name, len)) {
		struct new_utsname *u;

		down_write(&uts_sem);
		u = utsname();
		memcpy(u->domainname, tmp, len);
		memset(u->domainname + len, 0, sizeof(u->domainname) - len);
		errno = 0;
		uts_proc_notify(UTS_PROC_DOMAINNAME);
		up_write(&uts_sem);
	}
	return errno;
}

SYSCALL_DEFINE2(getrlimit, unsigned int, resource, struct rlimit __user *, rlim)
{
	struct rlimit value;
	int ret;

	ret = do_prlimit(current, resource, NULL, &value);
	if (!ret)
		ret = copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;

	return ret;
}

#ifdef CONFIG_COMPAT

COMPAT_SYSCALL_DEFINE2(setrlimit, unsigned int, resource,
		       struct compat_rlimit __user *, rlim)
{
	struct rlimit r;
	struct compat_rlimit r32;

	if (copy_from_user(&r32, rlim, sizeof(struct compat_rlimit)))
		return -EFAULT;

	if (r32.rlim_cur == COMPAT_RLIM_INFINITY)
		r.rlim_cur = RLIM_INFINITY;
	else
		r.rlim_cur = r32.rlim_cur;
	if (r32.rlim_max == COMPAT_RLIM_INFINITY)
		r.rlim_max = RLIM_INFINITY;
	else
		r.rlim_max = r32.rlim_max;
	return do_prlimit(current, resource, &r, NULL);
}

COMPAT_SYSCALL_DEFINE2(getrlimit, unsigned int, resource,
		       struct compat_rlimit __user *, rlim)
{
	struct rlimit r;
	int ret;

	ret = do_prlimit(current, resource, NULL, &r);
	if (!ret) {
		struct compat_rlimit r32;
		if (r.rlim_cur > COMPAT_RLIM_INFINITY)
			r32.rlim_cur = COMPAT_RLIM_INFINITY;
		else
			r32.rlim_cur = r.rlim_cur;
		if (r.rlim_max > COMPAT_RLIM_INFINITY)
			r32.rlim_max = COMPAT_RLIM_INFINITY;
		else
			r32.rlim_max = r.rlim_max;

		if (copy_to_user(rlim, &r32, sizeof(struct compat_rlimit)))
			return -EFAULT;
	}
	return ret;
}

#endif

#ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT

/*
 *	Back compatibility for getrlimit. Needed for some apps.
 */
SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
		struct rlimit __user *, rlim)
{
	struct rlimit x;
	if (resource >= RLIM_NLIMITS)
		return -EINVAL;

	resource = array_index_nospec(resource, RLIM_NLIMITS);
	task_lock(current->group_leader);
	x = current->signal->rlim[resource];
	task_unlock(current->group_leader);
	if (x.rlim_cur > 0x7FFFFFFF)
		x.rlim_cur = 0x7FFFFFFF;
	if (x.rlim_max > 0x7FFFFFFF)
		x.rlim_max = 0x7FFFFFFF;
	return copy_to_user(rlim, &x, sizeof(x)) ? -EFAULT : 0;
}

#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
		       struct compat_rlimit __user *, rlim)
{
	struct rlimit r;

	if (resource >= RLIM_NLIMITS)
		return -EINVAL;

	resource = array_index_nospec(resource, RLIM_NLIMITS);
	task_lock(current->group_leader);
	r = current->signal->rlim[resource];
	task_unlock(current->group_leader);
	if (r.rlim_cur > 0x7FFFFFFF)
		r.rlim_cur = 0x7FFFFFFF;
	if (r.rlim_max > 0x7FFFFFFF)
		r.rlim_max = 0x7FFFFFFF;

	if (put_user(r.rlim_cur, &rlim->rlim_cur) ||
	    put_user(r.rlim_max, &rlim->rlim_max))
		return -EFAULT;
	return 0;
}
#endif

#endif

static inline bool rlim64_is_infinity(__u64 rlim64)
{
#if BITS_PER_LONG < 64
	return rlim64 >= ULONG_MAX;
#else
	return rlim64 == RLIM64_INFINITY;
#endif
}

static void rlim_to_rlim64(const struct rlimit *rlim, struct rlimit64 *rlim64)
{
	if (rlim->rlim_cur == RLIM_INFINITY)
		rlim64->rlim_cur = RLIM64_INFINITY;
	else
		rlim64->rlim_cur = rlim->rlim_cur;
	if (rlim->rlim_max == RLIM_INFINITY)
		rlim64->rlim_max = RLIM64_INFINITY;
	else
		rlim64->rlim_max = rlim->rlim_max;
}

static void rlim64_to_rlim(const struct rlimit64 *rlim64, struct rlimit *rlim)
{
	if (rlim64_is_infinity(rlim64->rlim_cur))
		rlim->rlim_cur = RLIM_INFINITY;
	else
		rlim->rlim_cur = (unsigned long)rlim64->rlim_cur;
	if (rlim64_is_infinity(rlim64->rlim_max))
		rlim->rlim_max = RLIM_INFINITY;
	else
		rlim->rlim_max = (unsigned long)rlim64->rlim_max;
}

/* make sure you are allowed to change @tsk limits before calling this */
int do_prlimit(struct task_struct *tsk, unsigned int resource,
		struct rlimit *new_rlim, struct rlimit *old_rlim)
{
	struct rlimit *rlim;
	int retval = 0;

	if (resource >= RLIM_NLIMITS)
		return -EINVAL;
	if (new_rlim) {
		if (new_rlim->rlim_cur > new_rlim->rlim_max)
			return -EINVAL;
		if (resource == RLIMIT_NOFILE &&
				new_rlim->rlim_max > sysctl_nr_open)
			return -EPERM;
	}

	/* protect tsk->signal and tsk->sighand from disappearing */
	read_lock(&tasklist_lock);
	if (!tsk->sighand) {
		retval = -ESRCH;
		goto out;
	}

	rlim = tsk->signal->rlim + resource;
	task_lock(tsk->group_leader);
	if (new_rlim) {
		/* Keep the capable check against init_user_ns until
		   cgroups can contain all limits */
		if (new_rlim->rlim_max > rlim->rlim_max &&
				!capable(CAP_SYS_RESOURCE))
			retval = -EPERM;
		if (!retval)
			retval = security_task_setrlimit(tsk, resource, new_rlim);
		if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
			/*
			 * The caller is asking for an immediate RLIMIT_CPU
			 * expiry.  But we use the zero value to mean "it was
			 * never set".  So let's cheat and make it one second
			 * instead
			 */
			new_rlim->rlim_cur = 1;
		}
	}
	if (!retval) {
		if (old_rlim)
			*old_rlim = *rlim;
		if (new_rlim)
			*rlim = *new_rlim;
	}
	task_unlock(tsk->group_leader);

	/*
	 * RLIMIT_CPU handling.   Note that the kernel fails to return an error
	 * code if it rejected the user's attempt to set RLIMIT_CPU.  This is a
	 * very long-standing error, and fixing it now risks breakage of
	 * applications, so we live with it
	 */
	 if (!retval && new_rlim && resource == RLIMIT_CPU &&
	     new_rlim->rlim_cur != RLIM_INFINITY &&
	     IS_ENABLED(CONFIG_POSIX_TIMERS))
		update_rlimit_cpu(tsk, new_rlim->rlim_cur);
out:
	read_unlock(&tasklist_lock);
	return retval;
}

/* rcu lock must be held */
static int check_prlimit_permission(struct task_struct *task,
				    unsigned int flags)
{
	const struct cred *cred = current_cred(), *tcred;
	bool id_match;

	if (current == task)
		return 0;

	tcred = __task_cred(task);
	id_match = (uid_eq(cred->uid, tcred->euid) &&
		    uid_eq(cred->uid, tcred->suid) &&
		    uid_eq(cred->uid, tcred->uid)  &&
		    gid_eq(cred->gid, tcred->egid) &&
		    gid_eq(cred->gid, tcred->sgid) &&
		    gid_eq(cred->gid, tcred->gid));
	if (!id_match && !ns_capable(tcred->user_ns, CAP_SYS_RESOURCE))
		return -EPERM;

	return security_task_prlimit(cred, tcred, flags);
}

SYSCALL_DEFINE4(prlimit64, pid_t, pid, unsigned int, resource,
		const struct rlimit64 __user *, new_rlim,
		struct rlimit64 __user *, old_rlim)
{
	struct rlimit64 old64, new64;
	struct rlimit old, new;
	struct task_struct *tsk;
	unsigned int checkflags = 0;
	int ret;

	if (old_rlim)
		checkflags |= LSM_PRLIMIT_READ;

	if (new_rlim) {
		if (copy_from_user(&new64, new_rlim, sizeof(new64)))
			return -EFAULT;
		rlim64_to_rlim(&new64, &new);
		checkflags |= LSM_PRLIMIT_WRITE;
	}

	rcu_read_lock();
	tsk = pid ? find_task_by_vpid(pid) : current;
	if (!tsk) {
		rcu_read_unlock();
		return -ESRCH;
	}
	ret = check_prlimit_permission(tsk, checkflags);
	if (ret) {
		rcu_read_unlock();
		return ret;
	}
	get_task_struct(tsk);
	rcu_read_unlock();

	ret = do_prlimit(tsk, resource, new_rlim ? &new : NULL,
			old_rlim ? &old : NULL);

	if (!ret && old_rlim) {
		rlim_to_rlim64(&old, &old64);
		if (copy_to_user(old_rlim, &old64, sizeof(old64)))
			ret = -EFAULT;
	}

	put_task_struct(tsk);
	return ret;
}

SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
{
	struct rlimit new_rlim;

	if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
		return -EFAULT;
	return do_prlimit(current, resource, &new_rlim, NULL);
}

/*
 * It would make sense to put struct rusage in the task_struct,
 * except that would make the task_struct be *really big*.  After
 * task_struct gets moved into malloc'ed memory, it would
 * make sense to do this.  It will make moving the rest of the information
 * a lot simpler!  (Which we're not doing right now because we're not
 * measuring them yet).
 *
 * When sampling multiple threads for RUSAGE_SELF, under SMP we might have
 * races with threads incrementing their own counters.  But since word
 * reads are atomic, we either get new values or old values and we don't
 * care which for the sums.  We always take the siglock to protect reading
 * the c* fields from p->signal from races with exit.c updating those
 * fields when reaping, so a sample either gets all the additions of a
 * given child after it's reaped, or none so this sample is before reaping.
 *
 * Locking:
 * We need to take the siglock for CHILDEREN, SELF and BOTH
 * for  the cases current multithreaded, non-current single threaded
 * non-current multithreaded.  Thread traversal is now safe with
 * the siglock held.
 * Strictly speaking, we donot need to take the siglock if we are current and
 * single threaded,  as no one else can take our signal_struct away, no one
 * else can  reap the  children to update signal->c* counters, and no one else
 * can race with the signal-> fields. If we do not take any lock, the
 * signal-> fields could be read out of order while another thread was just
 * exiting. So we should  place a read memory barrier when we avoid the lock.
 * On the writer side,  write memory barrier is implied in  __exit_signal
 * as __exit_signal releases  the siglock spinlock after updating the signal->
 * fields. But we don't do this yet to keep things simple.
 *
 */

static void accumulate_thread_rusage(struct task_struct *t, struct rusage *r)
{
	r->ru_nvcsw += t->nvcsw;
	r->ru_nivcsw += t->nivcsw;
	r->ru_minflt += t->min_flt;
	r->ru_majflt += t->maj_flt;
	r->ru_inblock += task_io_get_inblock(t);
	r->ru_oublock += task_io_get_oublock(t);
}

void getrusage(struct task_struct *p, int who, struct rusage *r)
{
	struct task_struct *t;
	unsigned long flags;
	u64 tgutime, tgstime, utime, stime;
	unsigned long maxrss = 0;

	memset((char *)r, 0, sizeof (*r));
	utime = stime = 0;

	if (who == RUSAGE_THREAD) {
		task_cputime_adjusted(current, &utime, &stime);
		accumulate_thread_rusage(p, r);
		maxrss = p->signal->maxrss;
		goto out;
	}

	if (!lock_task_sighand(p, &flags))
		return;

	switch (who) {
	case RUSAGE_BOTH:
	case RUSAGE_CHILDREN:
		utime = p->signal->cutime;
		stime = p->signal->cstime;
		r->ru_nvcsw = p->signal->cnvcsw;
		r->ru_nivcsw = p->signal->cnivcsw;
		r->ru_minflt = p->signal->cmin_flt;
		r->ru_majflt = p->signal->cmaj_flt;
		r->ru_inblock = p->signal->cinblock;
		r->ru_oublock = p->signal->coublock;
		maxrss = p->signal->cmaxrss;

		if (who == RUSAGE_CHILDREN)
			break;

	case RUSAGE_SELF:
		thread_group_cputime_adjusted(p, &tgutime, &tgstime);
		utime += tgutime;
		stime += tgstime;
		r->ru_nvcsw += p->signal->nvcsw;
		r->ru_nivcsw += p->signal->nivcsw;
		r->ru_minflt += p->signal->min_flt;
		r->ru_majflt += p->signal->maj_flt;
		r->ru_inblock += p->signal->inblock;
		r->ru_oublock += p->signal->oublock;
		if (maxrss < p->signal->maxrss)
			maxrss = p->signal->maxrss;
		t = p;
		do {
			accumulate_thread_rusage(t, r);
		} while_each_thread(p, t);
		break;

	default:
		BUG();
	}
	unlock_task_sighand(p, &flags);

out:
	r->ru_utime = ns_to_timeval(utime);
	r->ru_stime = ns_to_timeval(stime);

	if (who != RUSAGE_CHILDREN) {
		struct mm_struct *mm = get_task_mm(p);

		if (mm) {
			setmax_mm_hiwater_rss(&maxrss, mm);
			mmput(mm);
		}
	}
	r->ru_maxrss = maxrss * (PAGE_SIZE / 1024); /* convert pages to KBs */
}

SYSCALL_DEFINE2(getrusage, int, who, struct rusage __user *, ru)
{
	struct rusage r;

	if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
	    who != RUSAGE_THREAD)
		return -EINVAL;

	getrusage(current, who, &r);
	return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
}

#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE2(getrusage, int, who, struct compat_rusage __user *, ru)
{
	struct rusage r;

	if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
	    who != RUSAGE_THREAD)
		return -EINVAL;

	getrusage(current, who, &r);
	return put_compat_rusage(&r, ru);
}
#endif

SYSCALL_DEFINE1(umask, int, mask)
{
	mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
	return mask;
}

static int prctl_set_mm_exe_file(struct mm_struct *mm, unsigned int fd)
{
	struct fd exe;
	struct file *old_exe, *exe_file;
	struct inode *inode;
	int err;

	exe = fdget(fd);
	if (!exe.file)
		return -EBADF;

	inode = file_inode(exe.file);

	/*
	 * Because the original mm->exe_file points to executable file, make
	 * sure that this one is executable as well, to avoid breaking an
	 * overall picture.
	 */
	err = -EACCES;
	if (!S_ISREG(inode->i_mode) || path_noexec(&exe.file->f_path))
		goto exit;

	err = inode_permission(inode, MAY_EXEC);
	if (err)
		goto exit;

	/*
	 * Forbid mm->exe_file change if old file still mapped.
	 */
	exe_file = get_mm_exe_file(mm);
	err = -EBUSY;
	if (exe_file) {
		struct vm_area_struct *vma;

		down_read(&mm->mmap_sem);
		for (vma = mm->mmap; vma; vma = vma->vm_next) {
			if (!vma->vm_file)
				continue;
			if (path_equal(&vma->vm_file->f_path,
				       &exe_file->f_path))
				goto exit_err;
		}

		up_read(&mm->mmap_sem);
		fput(exe_file);
	}

	err = 0;
	/* set the new file, lockless */
	get_file(exe.file);
	old_exe = xchg(&mm->exe_file, exe.file);
	if (old_exe)
		fput(old_exe);
exit:
	fdput(exe);
	return err;
exit_err:
	up_read(&mm->mmap_sem);
	fput(exe_file);
	goto exit;
}

/*
 * WARNING: we don't require any capability here so be very careful
 * in what is allowed for modification from userspace.
 */
static int validate_prctl_map(struct prctl_mm_map *prctl_map)
{
	unsigned long mmap_max_addr = TASK_SIZE;
	struct mm_struct *mm = current->mm;
	int error = -EINVAL, i;

	static const unsigned char offsets[] = {
		offsetof(struct prctl_mm_map, start_code),
		offsetof(struct prctl_mm_map, end_code),
		offsetof(struct prctl_mm_map, start_data),
		offsetof(struct prctl_mm_map, end_data),
		offsetof(struct prctl_mm_map, start_brk),
		offsetof(struct prctl_mm_map, brk),
		offsetof(struct prctl_mm_map, start_stack),
		offsetof(struct prctl_mm_map, arg_start),
		offsetof(struct prctl_mm_map, arg_end),
		offsetof(struct prctl_mm_map, env_start),
		offsetof(struct prctl_mm_map, env_end),
	};

	/*
	 * Make sure the members are not somewhere outside
	 * of allowed address space.
	 */
	for (i = 0; i < ARRAY_SIZE(offsets); i++) {
		u64 val = *(u64 *)((char *)prctl_map + offsets[i]);

		if ((unsigned long)val >= mmap_max_addr ||
		    (unsigned long)val < mmap_min_addr)
			goto out;
	}

	/*
	 * Make sure the pairs are ordered.
	 */
#define __prctl_check_order(__m1, __op, __m2)				\
	((unsigned long)prctl_map->__m1 __op				\
	 (unsigned long)prctl_map->__m2) ? 0 : -EINVAL
	error  = __prctl_check_order(start_code, <, end_code);
	error |= __prctl_check_order(start_data, <, end_data);
	error |= __prctl_check_order(start_brk, <=, brk);
	error |= __prctl_check_order(arg_start, <=, arg_end);
	error |= __prctl_check_order(env_start, <=, env_end);
	if (error)
		goto out;
#undef __prctl_check_order

	error = -EINVAL;

	/*
	 * @brk should be after @end_data in traditional maps.
	 */
	if (prctl_map->start_brk <= prctl_map->end_data ||
	    prctl_map->brk <= prctl_map->end_data)
		goto out;

	/*
	 * Neither we should allow to override limits if they set.
	 */
	if (check_data_rlimit(rlimit(RLIMIT_DATA), prctl_map->brk,
			      prctl_map->start_brk, prctl_map->end_data,
			      prctl_map->start_data))
			goto out;

	/*
	 * Someone is trying to cheat the auxv vector.
	 */
	if (prctl_map->auxv_size) {
		if (!prctl_map->auxv || prctl_map->auxv_size > sizeof(mm->saved_auxv))
			goto out;
	}

	/*
	 * Finally, make sure the caller has the rights to
	 * change /proc/pid/exe link: only local sys admin should
	 * be allowed to.
	 */
	if (prctl_map->exe_fd != (u32)-1) {
		if (!ns_capable(current_user_ns(), CAP_SYS_ADMIN))
			goto out;
	}

	error = 0;
out:
	return error;
}

#ifdef CONFIG_CHECKPOINT_RESTORE
static int prctl_set_mm_map(int opt, const void __user *addr, unsigned long data_size)
{
	struct prctl_mm_map prctl_map = { .exe_fd = (u32)-1, };
	unsigned long user_auxv[AT_VECTOR_SIZE];
	struct mm_struct *mm = current->mm;
	int error;

	BUILD_BUG_ON(sizeof(user_auxv) != sizeof(mm->saved_auxv));
	BUILD_BUG_ON(sizeof(struct prctl_mm_map) > 256);

	if (opt == PR_SET_MM_MAP_SIZE)
		return put_user((unsigned int)sizeof(prctl_map),
				(unsigned int __user *)addr);

	if (data_size != sizeof(prctl_map))
		return -EINVAL;

	if (copy_from_user(&prctl_map, addr, sizeof(prctl_map)))
		return -EFAULT;

	error = validate_prctl_map(&prctl_map);
	if (error)
		return error;

	if (prctl_map.auxv_size) {
		memset(user_auxv, 0, sizeof(user_auxv));
		if (copy_from_user(user_auxv,
				   (const void __user *)prctl_map.auxv,
				   prctl_map.auxv_size))
			return -EFAULT;

		/* Last entry must be AT_NULL as specification requires */
		user_auxv[AT_VECTOR_SIZE - 2] = AT_NULL;
		user_auxv[AT_VECTOR_SIZE - 1] = AT_NULL;
	}

	if (prctl_map.exe_fd != (u32)-1) {
		error = prctl_set_mm_exe_file(mm, prctl_map.exe_fd);
		if (error)
			return error;
	}

	/*
	 * arg_lock protects concurent updates but we still need mmap_sem for
	 * read to exclude races with sys_brk.
	 */
	down_read(&mm->mmap_sem);

	/*
	 * We don't validate if these members are pointing to
	 * real present VMAs because application may have correspond
	 * VMAs already unmapped and kernel uses these members for statistics
	 * output in procfs mostly, except
	 *
	 *  - @start_brk/@brk which are used in do_brk but kernel lookups
	 *    for VMAs when updating these memvers so anything wrong written
	 *    here cause kernel to swear at userspace program but won't lead
	 *    to any problem in kernel itself
	 */

	spin_lock(&mm->arg_lock);
	mm->start_code	= prctl_map.start_code;
	mm->end_code	= prctl_map.end_code;
	mm->start_data	= prctl_map.start_data;
	mm->end_data	= prctl_map.end_data;
	mm->start_brk	= prctl_map.start_brk;
	mm->brk		= prctl_map.brk;
	mm->start_stack	= prctl_map.start_stack;
	mm->arg_start	= prctl_map.arg_start;
	mm->arg_end	= prctl_map.arg_end;
	mm->env_start	= prctl_map.env_start;
	mm->env_end	= prctl_map.env_end;
	spin_unlock(&mm->arg_lock);

	/*
	 * Note this update of @saved_auxv is lockless thus
	 * if someone reads this member in procfs while we're
	 * updating -- it may get partly updated results. It's
	 * known and acceptable trade off: we leave it as is to
	 * not introduce additional locks here making the kernel
	 * more complex.
	 */
	if (prctl_map.auxv_size)
		memcpy(mm->saved_auxv, user_auxv, sizeof(user_auxv));

	up_read(&mm->mmap_sem);
	return 0;
}
#endif /* CONFIG_CHECKPOINT_RESTORE */

static int prctl_set_auxv(struct mm_struct *mm, unsigned long addr,
			  unsigned long len)
{
	/*
	 * This doesn't move the auxiliary vector itself since it's pinned to
	 * mm_struct, but it permits filling the vector with new values.  It's
	 * up to the caller to provide sane values here, otherwise userspace
	 * tools which use this vector might be unhappy.
	 */
	unsigned long user_auxv[AT_VECTOR_SIZE];

	if (len > sizeof(user_auxv))
		return -EINVAL;

	if (copy_from_user(user_auxv, (const void __user *)addr, len))
		return -EFAULT;

	/* Make sure the last entry is always AT_NULL */
	user_auxv[AT_VECTOR_SIZE - 2] = 0;
	user_auxv[AT_VECTOR_SIZE - 1] = 0;

	BUILD_BUG_ON(sizeof(user_auxv) != sizeof(mm->saved_auxv));

	task_lock(current);
	memcpy(mm->saved_auxv, user_auxv, len);
	task_unlock(current);

	return 0;
}

static int prctl_set_mm(int opt, unsigned long addr,
			unsigned long arg4, unsigned long arg5)
{
	struct mm_struct *mm = current->mm;
	struct prctl_mm_map prctl_map;
	struct vm_area_struct *vma;
	int error;

	if (arg5 || (arg4 && (opt != PR_SET_MM_AUXV &&
			      opt != PR_SET_MM_MAP &&
			      opt != PR_SET_MM_MAP_SIZE)))
		return -EINVAL;

#ifdef CONFIG_CHECKPOINT_RESTORE
	if (opt == PR_SET_MM_MAP || opt == PR_SET_MM_MAP_SIZE)
		return prctl_set_mm_map(opt, (const void __user *)addr, arg4);
#endif

	if (!capable(CAP_SYS_RESOURCE))
		return -EPERM;

	if (opt == PR_SET_MM_EXE_FILE)
		return prctl_set_mm_exe_file(mm, (unsigned int)addr);

	if (opt == PR_SET_MM_AUXV)
		return prctl_set_auxv(mm, addr, arg4);

	if (addr >= TASK_SIZE || addr < mmap_min_addr)
		return -EINVAL;

	error = -EINVAL;

	down_write(&mm->mmap_sem);
	vma = find_vma(mm, addr);

	prctl_map.start_code	= mm->start_code;
	prctl_map.end_code	= mm->end_code;
	prctl_map.start_data	= mm->start_data;
	prctl_map.end_data	= mm->end_data;
	prctl_map.start_brk	= mm->start_brk;
	prctl_map.brk		= mm->brk;
	prctl_map.start_stack	= mm->start_stack;
	prctl_map.arg_start	= mm->arg_start;
	prctl_map.arg_end	= mm->arg_end;
	prctl_map.env_start	= mm->env_start;
	prctl_map.env_end	= mm->env_end;
	prctl_map.auxv		= NULL;
	prctl_map.auxv_size	= 0;
	prctl_map.exe_fd	= -1;

	switch (opt) {
	case PR_SET_MM_START_CODE:
		prctl_map.start_code = addr;
		break;
	case PR_SET_MM_END_CODE:
		prctl_map.end_code = addr;
		break;
	case PR_SET_MM_START_DATA:
		prctl_map.start_data = addr;
		break;
	case PR_SET_MM_END_DATA:
		prctl_map.end_data = addr;
		break;
	case PR_SET_MM_START_STACK:
		prctl_map.start_stack = addr;
		break;
	case PR_SET_MM_START_BRK:
		prctl_map.start_brk = addr;
		break;
	case PR_SET_MM_BRK:
		prctl_map.brk = addr;
		break;
	case PR_SET_MM_ARG_START:
		prctl_map.arg_start = addr;
		break;
	case PR_SET_MM_ARG_END:
		prctl_map.arg_end = addr;
		break;
	case PR_SET_MM_ENV_START:
		prctl_map.env_start = addr;
		break;
	case PR_SET_MM_ENV_END:
		prctl_map.env_end = addr;
		break;
	default:
		goto out;
	}

	error = validate_prctl_map(&prctl_map);
	if (error)
		goto out;

	switch (opt) {
	/*
	 * If command line arguments and environment
	 * are placed somewhere else on stack, we can
	 * set them up here, ARG_START/END to setup
	 * command line argumets and ENV_START/END
	 * for environment.
	 */
	case PR_SET_MM_START_STACK:
	case PR_SET_MM_ARG_START:
	case PR_SET_MM_ARG_END:
	case PR_SET_MM_ENV_START:
	case PR_SET_MM_ENV_END:
		if (!vma) {
			error = -EFAULT;
			goto out;
		}
	}

	mm->start_code	= prctl_map.start_code;
	mm->end_code	= prctl_map.end_code;
	mm->start_data	= prctl_map.start_data;
	mm->end_data	= prctl_map.end_data;
	mm->start_brk	= prctl_map.start_brk;
	mm->brk		= prctl_map.brk;
	mm->start_stack	= prctl_map.start_stack;
	mm->arg_start	= prctl_map.arg_start;
	mm->arg_end	= prctl_map.arg_end;
	mm->env_start	= prctl_map.env_start;
	mm->env_end	= prctl_map.env_end;

	error = 0;
out:
	up_write(&mm->mmap_sem);
	return error;
}

#ifdef CONFIG_CHECKPOINT_RESTORE
static int prctl_get_tid_address(struct task_struct *me, int __user **tid_addr)
{
	return put_user(me->clear_child_tid, tid_addr);
}
#else
static int prctl_get_tid_address(struct task_struct *me, int __user **tid_addr)
{
	return -EINVAL;
}
#endif

static int propagate_has_child_subreaper(struct task_struct *p, void *data)
{
	/*
	 * If task has has_child_subreaper - all its decendants
	 * already have these flag too and new decendants will
	 * inherit it on fork, skip them.
	 *
	 * If we've found child_reaper - skip descendants in
	 * it's subtree as they will never get out pidns.
	 */
	if (p->signal->has_child_subreaper ||
	    is_child_reaper(task_pid(p)))
		return 0;

	p->signal->has_child_subreaper = 1;
	return 1;
}

int __weak arch_prctl_spec_ctrl_get(struct task_struct *t, unsigned long which)
{
	return -EINVAL;
}

int __weak arch_prctl_spec_ctrl_set(struct task_struct *t, unsigned long which,
				    unsigned long ctrl)
{
	return -EINVAL;
}

SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
		unsigned long, arg4, unsigned long, arg5)
{
	struct task_struct *me = current;
	unsigned char comm[sizeof(me->comm)];
	long error;

	error = security_task_prctl(option, arg2, arg3, arg4, arg5);
	if (error != -ENOSYS)
		return error;

	error = 0;
	switch (option) {
	case PR_SET_PDEATHSIG:
		if (!valid_signal(arg2)) {
			error = -EINVAL;
			break;
		}
		me->pdeath_signal = arg2;
		break;
	case PR_GET_PDEATHSIG:
		error = put_user(me->pdeath_signal, (int __user *)arg2);
		break;
	case PR_GET_DUMPABLE:
		error = get_dumpable(me->mm);
		break;
	case PR_SET_DUMPABLE:
		if (arg2 != SUID_DUMP_DISABLE && arg2 != SUID_DUMP_USER) {
			error = -EINVAL;
			break;
		}
		set_dumpable(me->mm, arg2);
		break;

	case PR_SET_UNALIGN:
		error = SET_UNALIGN_CTL(me, arg2);
		break;
	case PR_GET_UNALIGN:
		error = GET_UNALIGN_CTL(me, arg2);
		break;
	case PR_SET_FPEMU:
		error = SET_FPEMU_CTL(me, arg2);
		break;
	case PR_GET_FPEMU:
		error = GET_FPEMU_CTL(me, arg2);
		break;
	case PR_SET_FPEXC:
		error = SET_FPEXC_CTL(me, arg2);
		break;
	case PR_GET_FPEXC:
		error = GET_FPEXC_CTL(me, arg2);
		break;
	case PR_GET_TIMING:
		error = PR_TIMING_STATISTICAL;
		break;
	case PR_SET_TIMING:
		if (arg2 != PR_TIMING_STATISTICAL)
			error = -EINVAL;
		break;
	case PR_SET_NAME:
		comm[sizeof(me->comm) - 1] = 0;
		if (strncpy_from_user(comm, (char __user *)arg2,
				      sizeof(me->comm) - 1) < 0)
			return -EFAULT;
		set_task_comm(me, comm);
		proc_comm_connector(me);
		break;
	case PR_GET_NAME:
		get_task_comm(comm, me);
		if (copy_to_user((char __user *)arg2, comm, sizeof(comm)))
			return -EFAULT;
		break;
	case PR_GET_ENDIAN:
		error = GET_ENDIAN(me, arg2);
		break;
	case PR_SET_ENDIAN:
		error = SET_ENDIAN(me, arg2);
		break;
	case PR_GET_SECCOMP:
		error = prctl_get_seccomp();
		break;
	case PR_SET_SECCOMP:
		error = prctl_set_seccomp(arg2, (char __user *)arg3);
		break;
	case PR_GET_TSC:
		error = GET_TSC_CTL(arg2);
		break;
	case PR_SET_TSC:
		error = SET_TSC_CTL(arg2);
		break;
	case PR_TASK_PERF_EVENTS_DISABLE:
		error = perf_event_task_disable();
		break;
	case PR_TASK_PERF_EVENTS_ENABLE:
		error = perf_event_task_enable();
		break;
	case PR_GET_TIMERSLACK:
		if (current->timer_slack_ns > ULONG_MAX)
			error = ULONG_MAX;
		else
			error = current->timer_slack_ns;
		break;
	case PR_SET_TIMERSLACK:
		if (arg2 <= 0)
			current->timer_slack_ns =
					current->default_timer_slack_ns;
		else
			current->timer_slack_ns = arg2;
		break;
	case PR_MCE_KILL:
		if (arg4 | arg5)
			return -EINVAL;
		switch (arg2) {
		case PR_MCE_KILL_CLEAR:
			if (arg3 != 0)
				return -EINVAL;
			current->flags &= ~PF_MCE_PROCESS;
			break;
		case PR_MCE_KILL_SET:
			current->flags |= PF_MCE_PROCESS;
			if (arg3 == PR_MCE_KILL_EARLY)
				current->flags |= PF_MCE_EARLY;
			else if (arg3 == PR_MCE_KILL_LATE)
				current->flags &= ~PF_MCE_EARLY;
			else if (arg3 == PR_MCE_KILL_DEFAULT)
				current->flags &=
						~(PF_MCE_EARLY|PF_MCE_PROCESS);
			else
				return -EINVAL;
			break;
		default:
			return -EINVAL;
		}
		break;
	case PR_MCE_KILL_GET:
		if (arg2 | arg3 | arg4 | arg5)
			return -EINVAL;
		if (current->flags & PF_MCE_PROCESS)
			error = (current->flags & PF_MCE_EARLY) ?
				PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE;
		else
			error = PR_MCE_KILL_DEFAULT;
		break;
	case PR_SET_MM:
		error = prctl_set_mm(arg2, arg3, arg4, arg5);
		break;
	case PR_GET_TID_ADDRESS:
		error = prctl_get_tid_address(me, (int __user **)arg2);
		break;
	case PR_SET_CHILD_SUBREAPER:
		me->signal->is_child_subreaper = !!arg2;
		if (!arg2)
			break;

		walk_process_tree(me, propagate_has_child_subreaper, NULL);
		break;
	case PR_GET_CHILD_SUBREAPER:
		error = put_user(me->signal->is_child_subreaper,
				 (int __user *)arg2);
		break;
	case PR_SET_NO_NEW_PRIVS:
		if (arg2 != 1 || arg3 || arg4 || arg5)
			return -EINVAL;

		task_set_no_new_privs(current);
		break;
	case PR_GET_NO_NEW_PRIVS:
		if (arg2 || arg3 || arg4 || arg5)
			return -EINVAL;
		return task_no_new_privs(current) ? 1 : 0;
	case PR_GET_THP_DISABLE:
		if (arg2 || arg3 || arg4 || arg5)
			return -EINVAL;
		error = !!test_bit(MMF_DISABLE_THP, &me->mm->flags);
		break;
	case PR_SET_THP_DISABLE:
		if (arg3 || arg4 || arg5)
			return -EINVAL;
		if (down_write_killable(&me->mm->mmap_sem))
			return -EINTR;
		if (arg2)
			set_bit(MMF_DISABLE_THP, &me->mm->flags);
		else
			clear_bit(MMF_DISABLE_THP, &me->mm->flags);
		up_write(&me->mm->mmap_sem);
		break;
	case PR_MPX_ENABLE_MANAGEMENT:
		if (arg2 || arg3 || arg4 || arg5)
			return -EINVAL;
		error = MPX_ENABLE_MANAGEMENT();
		break;
	case PR_MPX_DISABLE_MANAGEMENT:
		if (arg2 || arg3 || arg4 || arg5)
			return -EINVAL;
		error = MPX_DISABLE_MANAGEMENT();
		break;
	case PR_SET_FP_MODE:
		error = SET_FP_MODE(me, arg2);
		break;
	case PR_GET_FP_MODE:
		error = GET_FP_MODE(me);
		break;
	case PR_SVE_SET_VL:
		error = SVE_SET_VL(arg2);
		break;
	case PR_SVE_GET_VL:
		error = SVE_GET_VL();
		break;
	case PR_GET_SPECULATION_CTRL:
		if (arg3 || arg4 || arg5)
			return -EINVAL;
		error = arch_prctl_spec_ctrl_get(me, arg2);
		break;
	case PR_SET_SPECULATION_CTRL:
		if (arg4 || arg5)
			return -EINVAL;
		error = arch_prctl_spec_ctrl_set(me, arg2, arg3);
		break;
	default:
		error = -EINVAL;
		break;
	}
	return error;
}

SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep,
		struct getcpu_cache __user *, unused)
{
	int err = 0;
	int cpu = raw_smp_processor_id();

	if (cpup)
		err |= put_user(cpu, cpup);
	if (nodep)
		err |= put_user(cpu_to_node(cpu), nodep);
	return err ? -EFAULT : 0;
}

/**
 * do_sysinfo - fill in sysinfo struct
 * @info: pointer to buffer to fill
 */
static int do_sysinfo(struct sysinfo *info)
{
	unsigned long mem_total, sav_total;
	unsigned int mem_unit, bitcount;
	struct timespec64 tp;

	memset(info, 0, sizeof(struct sysinfo));

	ktime_get_boottime_ts64(&tp);
	info->uptime = tp.tv_sec + (tp.tv_nsec ? 1 : 0);

	get_avenrun(info->loads, 0, SI_LOAD_SHIFT - FSHIFT);

	info->procs = nr_threads;

	si_meminfo(info);
	si_swapinfo(info);

	/*
	 * If the sum of all the available memory (i.e. ram + swap)
	 * is less than can be stored in a 32 bit unsigned long then
	 * we can be binary compatible with 2.2.x kernels.  If not,
	 * well, in that case 2.2.x was broken anyways...
	 *
	 *  -Erik Andersen <andersee@debian.org>
	 */

	mem_total = info->totalram + info->totalswap;
	if (mem_total < info->totalram || mem_total < info->totalswap)
		goto out;
	bitcount = 0;
	mem_unit = info->mem_unit;
	while (mem_unit > 1) {
		bitcount++;
		mem_unit >>= 1;
		sav_total = mem_total;
		mem_total <<= 1;
		if (mem_total < sav_total)
			goto out;
	}

	/*
	 * If mem_total did not overflow, multiply all memory values by
	 * info->mem_unit and set it to 1.  This leaves things compatible
	 * with 2.2.x, and also retains compatibility with earlier 2.4.x
	 * kernels...
	 */

	info->mem_unit = 1;
	info->totalram <<= bitcount;
	info->freeram <<= bitcount;
	info->sharedram <<= bitcount;
	info->bufferram <<= bitcount;
	info->totalswap <<= bitcount;
	info->freeswap <<= bitcount;
	info->totalhigh <<= bitcount;
	info->freehigh <<= bitcount;

out:
	return 0;
}

SYSCALL_DEFINE1(sysinfo, struct sysinfo __user *, info)
{
	struct sysinfo val;

	do_sysinfo(&val);

	if (copy_to_user(info, &val, sizeof(struct sysinfo)))
		return -EFAULT;

	return 0;
}

#ifdef CONFIG_COMPAT
struct compat_sysinfo {
	s32 uptime;
	u32 loads[3];
	u32 totalram;
	u32 freeram;
	u32 sharedram;
	u32 bufferram;
	u32 totalswap;
	u32 freeswap;
	u16 procs;
	u16 pad;
	u32 totalhigh;
	u32 freehigh;
	u32 mem_unit;
	char _f[20-2*sizeof(u32)-sizeof(int)];
};

COMPAT_SYSCALL_DEFINE1(sysinfo, struct compat_sysinfo __user *, info)
{
	struct sysinfo s;

	do_sysinfo(&s);

	/* Check to see if any memory value is too large for 32-bit and scale
	 *  down if needed
	 */
	if (upper_32_bits(s.totalram) || upper_32_bits(s.totalswap)) {
		int bitcount = 0;

		while (s.mem_unit < PAGE_SIZE) {
			s.mem_unit <<= 1;
			bitcount++;
		}

		s.totalram >>= bitcount;
		s.freeram >>= bitcount;
		s.sharedram >>= bitcount;
		s.bufferram >>= bitcount;
		s.totalswap >>= bitcount;
		s.freeswap >>= bitcount;
		s.totalhigh >>= bitcount;
		s.freehigh >>= bitcount;
	}

	if (!access_ok(VERIFY_WRITE, info, sizeof(struct compat_sysinfo)) ||
	    __put_user(s.uptime, &info->uptime) ||
	    __put_user(s.loads[0], &info->loads[0]) ||
	    __put_user(s.loads[1], &info->loads[1]) ||
	    __put_user(s.loads[2], &info->loads[2]) ||
	    __put_user(s.totalram, &info->totalram) ||
	    __put_user(s.freeram, &info->freeram) ||
	    __put_user(s.sharedram, &info->sharedram) ||
	    __put_user(s.bufferram, &info->bufferram) ||
	    __put_user(s.totalswap, &info->totalswap) ||
	    __put_user(s.freeswap, &info->freeswap) ||
	    __put_user(s.procs, &info->procs) ||
	    __put_user(s.totalhigh, &info->totalhigh) ||
	    __put_user(s.freehigh, &info->freehigh) ||
	    __put_user(s.mem_unit, &info->mem_unit))
		return -EFAULT;

	return 0;
}
#endif /* CONFIG_COMPAT */